[media] em28xx-audio: don't hardcode audio URB calculus
authorMauro Carvalho Chehab <m.chehab@samsung.com>
Fri, 10 Jan 2014 08:53:24 +0000 (05:53 -0300)
committerMauro Carvalho Chehab <m.chehab@samsung.com>
Sun, 12 Jan 2014 13:56:59 +0000 (11:56 -0200)
The current code hardcodes the number of audio URBs, the number
of packets per URB and the maximum URB size.

This is not a good idea, as it:

- wastes more bandwidth than necessary, by using a very
  large number of packets;

- those constants are bound to an specific scenario, with
  a bandwidth of 48 kHz;

- don't take the maximum endpoint size into account;

- with urb->interval = 1 on xHCI, those constraints cause a "funny"
  setup: URBs with 64 packets inside, with only 24 bytes total. E. g.
  a complete waste of space.

Change the code to do dynamic URB audio calculus and allocation.

For now, use the same constraints as used before this patch, to
avoid regressions.

A good scenario (tested) seems to use those defines, instead:

#define EM28XX_MAX_AUDIO_BUFS          8
#define EM28XX_MIN_AUDIO_PACKETS       2

But let's not do such change here, letting the optimization to
happen on latter patches, after more tests.

Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/em28xx/em28xx-audio.c
drivers/media/usb/em28xx/em28xx.h

index 4ee3488960e11d7601735ca06fccbc0e329a793a..6c7d34600294c371eaf82cb2d8afe27aa677b6f8 100644 (file)
@@ -50,6 +50,8 @@ static int debug;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "activates debug info");
 
+#define EM28XX_MAX_AUDIO_BUFS          5
+#define EM28XX_MIN_AUDIO_PACKETS       64
 #define dprintk(fmt, arg...) do {                                      \
            if (debug)                                                  \
                printk(KERN_INFO "em28xx-audio %s: " fmt,               \
@@ -63,7 +65,7 @@ static int em28xx_deinit_isoc_audio(struct em28xx *dev)
        int i;
 
        dprintk("Stopping isoc\n");
-       for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
+       for (i = 0; i < dev->adev.num_urb; i++) {
                struct urb *urb = dev->adev.urb[i];
 
                if (!irqs_disabled())
@@ -168,7 +170,7 @@ static int em28xx_init_audio_isoc(struct em28xx *dev)
        dprintk("Starting isoc transfers\n");
 
        /* Start streaming */
-       for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
+       for (i = 0; i < dev->adev.num_urb; i++) {
                memset(dev->adev.transfer_buffer[i], 0x80,
                       dev->adev.urb[i]->transfer_buffer_length);
 
@@ -598,21 +600,35 @@ static void em28xx_audio_free_urb(struct em28xx *dev)
 {
        int i;
 
-       for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
+       for (i = 0; i < dev->adev.num_urb; i++) {
                struct urb *urb = dev->adev.urb[i];
 
-               if (!dev->adev.urb[i])
+               if (!urb)
                        continue;
 
-               usb_free_coherent(dev->udev,
-                                 urb->transfer_buffer_length,
-                                 dev->adev.transfer_buffer[i],
-                                 urb->transfer_dma);
+               if (dev->adev.transfer_buffer[i])
+                       usb_free_coherent(dev->udev,
+                                         urb->transfer_buffer_length,
+                                         dev->adev.transfer_buffer[i],
+                                         urb->transfer_dma);
 
                usb_free_urb(urb);
-               dev->adev.urb[i] = NULL;
-               dev->adev.transfer_buffer[i] = NULL;
        }
+       kfree(dev->adev.urb);
+       kfree(dev->adev.transfer_buffer);
+       dev->adev.num_urb = 0;
+}
+
+/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
+static int em28xx_audio_ep_packet_size(struct usb_device *udev,
+                                       struct usb_endpoint_descriptor *e)
+{
+       int size = le16_to_cpu(e->wMaxPacketSize);
+
+       if (udev->speed == USB_SPEED_HIGH)
+               return (size & 0x7ff) *  (1 + (((size) >> 11) & 0x03));
+
+       return size & 0x7ff;
 }
 
 static int em28xx_audio_init(struct em28xx *dev)
@@ -623,9 +639,8 @@ static int em28xx_audio_init(struct em28xx *dev)
        struct usb_interface *intf;
        struct usb_endpoint_descriptor *e, *ep = NULL;
        static int          devnr;
-       int                 err, i;
-       const int sb_size = EM28XX_NUM_AUDIO_PACKETS *
-                           EM28XX_AUDIO_MAX_PACKET_SIZE;
+       int                 err, i, ep_size, interval, num_urb, npackets;
+       int                 urb_size, bytes_per_transfer;
        u8 alt;
 
        if (!dev->has_alsa_audio || dev->audio_ifnum < 0) {
@@ -648,6 +663,9 @@ static int em28xx_audio_init(struct em28xx *dev)
                return err;
 
        spin_lock_init(&adev->slock);
+       adev->sndcard = card;
+       adev->udev = dev->udev;
+
        err = snd_pcm_new(card, "Em28xx Audio", 0, 0, 1, &pcm);
        if (err < 0) {
                snd_card_free(card);
@@ -712,25 +730,92 @@ static int em28xx_audio_init(struct em28xx *dev)
                return -ENODEV;
        }
 
-       /* Alloc URB and transfer buffers */
-       for (i = 0; i < EM28XX_AUDIO_BUFS; i++) {
+       ep_size = em28xx_audio_ep_packet_size(dev->udev, ep);
+       interval = 1 << (ep->bInterval - 1);
+
+       em28xx_info("Endpoint 0x%02x %s on intf %d alt %d interval = %d, size %d\n",
+                    EM28XX_EP_AUDIO, usb_speed_string(dev->udev->speed),
+                    dev->audio_ifnum, alt,
+                    interval,
+                    ep_size);
+
+       /* Calculate the number and size of URBs to better fit the audio samples */
+
+       /*
+        * Estimate the number of bytes per DMA transfer.
+        *
+        * This is given by the bit rate (for now, only 48000 Hz) multiplied
+        * by 2 channels and 2 bytes/sample divided by the number of microframe
+        * intervals and by the microframe rate (125 us)
+        */
+       bytes_per_transfer = DIV_ROUND_UP(48000 * 2 * 2, 125 * interval);
+
+       /*
+        * Estimate the number of transfer URBs. Don't let it go past the
+        * maximum number of URBs that is known to be supported by the device.
+        */
+       num_urb = DIV_ROUND_UP(bytes_per_transfer, ep_size);
+       if (num_urb > EM28XX_MAX_AUDIO_BUFS)
+               num_urb = EM28XX_MAX_AUDIO_BUFS;
+
+       /*
+        * Now that we know the number of bytes per transfer and the number of
+        * URBs, estimate the typical size of an URB, in order to adjust the
+        * minimal number of packets.
+        */
+       urb_size = bytes_per_transfer / num_urb;
+
+       /*
+        * Now, calculate the amount of audio packets to be filled on each
+        * URB. In order to preserve the old behaviour, use a minimal
+        * threshold for this value.
+        */
+       npackets = EM28XX_MIN_AUDIO_PACKETS;
+       if (urb_size > ep_size * npackets)
+               npackets = DIV_ROUND_UP(urb_size, ep_size);
+
+       em28xx_info("Number of URBs: %d, with %d packets and %d size",
+                   num_urb, npackets, urb_size);
+
+       /* Allocate space to store the number of URBs to be used */
+
+       dev->adev.transfer_buffer = kcalloc(num_urb,
+                                           sizeof(*dev->adev.transfer_buffer),
+                                           GFP_ATOMIC);
+       if (!dev->adev.transfer_buffer) {
+               snd_card_free(card);
+               return -ENOMEM;
+       }
+
+       dev->adev.urb = kcalloc(num_urb, sizeof(*dev->adev.urb), GFP_ATOMIC);
+       if (!dev->adev.urb) {
+               snd_card_free(card);
+               kfree(dev->adev.transfer_buffer);
+               return -ENOMEM;
+       }
+
+       /* Alloc memory for each URB and for each transfer buffer */
+       dev->adev.num_urb = num_urb;
+       for (i = 0; i < num_urb; i++) {
                struct urb *urb;
                int j, k;
                void *buf;
 
-               urb = usb_alloc_urb(EM28XX_NUM_AUDIO_PACKETS, GFP_ATOMIC);
+               urb = usb_alloc_urb(npackets, GFP_ATOMIC);
                if (!urb) {
                        em28xx_errdev("usb_alloc_urb failed!\n");
                        em28xx_audio_free_urb(dev);
+                       snd_card_free(card);
                        return -ENOMEM;
                }
                dev->adev.urb[i] = urb;
 
-               buf = usb_alloc_coherent(dev->udev, sb_size, GFP_ATOMIC,
+               buf = usb_alloc_coherent(dev->udev, npackets * ep_size, GFP_ATOMIC,
                                         &urb->transfer_dma);
                if (!buf) {
                        em28xx_errdev("usb_alloc_coherent failed!\n");
                        em28xx_audio_free_urb(dev);
+                       snd_card_free(card);
                        return -ENOMEM;
                }
                dev->adev.transfer_buffer[i] = buf;
@@ -739,23 +824,15 @@ static int em28xx_audio_init(struct em28xx *dev)
                urb->context = dev;
                urb->pipe = usb_rcvisocpipe(dev->udev, EM28XX_EP_AUDIO);
                urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP;
-               urb->transfer_buffer = dev->adev.transfer_buffer[i];
-               urb->interval = 1 << (ep->bInterval - 1);
+               urb->transfer_buffer = buf;
+               urb->interval = interval;
                urb->complete = em28xx_audio_isocirq;
-               urb->number_of_packets = EM28XX_NUM_AUDIO_PACKETS;
-               urb->transfer_buffer_length = sb_size;
-
-               if (!i)
-                       dprintk("Will use ep 0x%02x on intf %d alt %d interval = %d (rcv isoc pipe: 0x%08x)\n",
-                               EM28XX_EP_AUDIO, dev->audio_ifnum, alt,
-                               urb->interval,
-                               urb->pipe);
+               urb->number_of_packets = npackets;
+               urb->transfer_buffer_length = ep_size * npackets;
 
-               for (j = k = 0; j < EM28XX_NUM_AUDIO_PACKETS;
-                            j++, k += EM28XX_AUDIO_MAX_PACKET_SIZE) {
+               for (j = k = 0; j < npackets; j++, k += ep_size) {
                        urb->iso_frame_desc[j].offset = k;
-                       urb->iso_frame_desc[j].length =
-                           EM28XX_AUDIO_MAX_PACKET_SIZE;
+                       urb->iso_frame_desc[j].length = ep_size;
                }
        }
 
@@ -765,8 +842,6 @@ static int em28xx_audio_init(struct em28xx *dev)
                snd_card_free(card);
                return err;
        }
-       adev->sndcard = card;
-       adev->udev = dev->udev;
 
        em28xx_info("Audio extension successfully initialized\n");
        return 0;
index efdf3864276885cdd8573aba8536227eadd52b9f..e76f993e319547d0c42647c5eb33732326660be0 100644 (file)
@@ -481,9 +481,6 @@ struct em28xx_eeprom {
        u8 string_idx_table;
 };
 
-#define EM28XX_AUDIO_BUFS 5
-#define EM28XX_NUM_AUDIO_PACKETS 64
-#define EM28XX_AUDIO_MAX_PACKET_SIZE 196 /* static value */
 #define EM28XX_CAPTURE_STREAM_EN 1
 
 /* em28xx extensions */
@@ -498,8 +495,9 @@ struct em28xx_eeprom {
 
 struct em28xx_audio {
        char name[50];
-       char *transfer_buffer[EM28XX_AUDIO_BUFS];
-       struct urb *urb[EM28XX_AUDIO_BUFS];
+       unsigned num_urb;
+       char **transfer_buffer;
+       struct urb **urb;
        struct usb_device *udev;
        unsigned int capture_transfer_done;
        struct snd_pcm_substream   *capture_pcm_substream;