V4L/DVB (9754): em28xx: improve debug messages
authorMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 25 Nov 2008 13:06:21 +0000 (10:06 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 29 Dec 2008 19:53:42 +0000 (17:53 -0200)
Now, the first message states board names. Also, removed printing the alternate
settings by default. I2C messages are now clearer.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/em28xx/em28xx-i2c.c
drivers/media/video/em28xx/em28xx-video.c

index 8b82c5528a167a7fe559aeef51aac8356eac9258..3013abd00e05d265dd0bda9db3cedcd66bec4c80 100644 (file)
@@ -1274,6 +1274,10 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 {
        int rc;
 
+       em28xx_set_model(dev);
+
+       em28xx_info("Found %s\n", dev->board.name);
+
        /* Set the default GPO/GPIO for legacy devices */
        dev->reg_gpo_num = EM2880_R04_GPO;
        dev->reg_gpio_num = EM28XX_R08_GPIO;
@@ -1284,7 +1288,8 @@ void em28xx_pre_card_setup(struct em28xx *dev)
        rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID);
        if (rc > 0) {
                dev->chip_id = rc;
-               switch (rc) {
+
+               switch (dev->chip_id) {
                case CHIP_ID_EM2750:
                        em28xx_info("chip ID is em2750\n");
                        break;
@@ -1307,7 +1312,7 @@ void em28xx_pre_card_setup(struct em28xx *dev)
                        dev->wait_after_write = 0;
                        break;
                default:
-                       em28xx_info("em28xx chip ID = %d\n", rc);
+                       em28xx_info("em28xx chip ID = %d\n", dev->chip_id);
                }
        }
 
@@ -1316,8 +1321,6 @@ void em28xx_pre_card_setup(struct em28xx *dev)
        if (rc >= 0)
                dev->reg_gpo = rc;
 
-       em28xx_set_model(dev);
-
        /* Those are the default values for the majority of boards
           Use those values if not specified otherwise at boards entry
         */
index 78d60231ee3fe15b15b40d8f4b2ac1e3a3ca07b5..d69f0efcc9aad821101d431b8c5a3afc1177da07 100644 (file)
@@ -388,47 +388,49 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned char *eedata, int len)
        if (em_eeprom->id == 0x9567eb1a)
                dev->hash = em28xx_hash_mem(eedata, len, 32);
 
-       printk(KERN_INFO "EEPROM ID= 0x%08x, hash = 0x%08lx\n",
-              em_eeprom->id, dev->hash);
-       printk(KERN_INFO "Vendor/Product ID= %04x:%04x\n", em_eeprom->vendor_ID,
-              em_eeprom->product_ID);
+       printk(KERN_INFO "%s: EEPROM ID= 0x%08x, EEPROM hash = 0x%08lx\n",
+              dev->name, em_eeprom->id, dev->hash);
+
+       printk(KERN_INFO "%s: EEPROM info:\n", dev->name);
 
        switch (em_eeprom->chip_conf >> 4 & 0x3) {
        case 0:
-               printk(KERN_INFO "No audio on board.\n");
+               printk(KERN_INFO "%s:\tNo audio on board.\n", dev->name);
                break;
        case 1:
-               printk(KERN_INFO "AC97 audio (5 sample rates)\n");
+               printk(KERN_INFO "%s:\tAC97 audio (5 sample rates)\n",
+                                dev->name);
                break;
        case 2:
-               printk(KERN_INFO "I2S audio, sample rate=32k\n");
+               printk(KERN_INFO "%s:\tI2S audio, sample rate=32k\n", dev->name);
                break;
        case 3:
-               printk(KERN_INFO "I2S audio, 3 sample rates\n");
+               printk(KERN_INFO "%s:\tI2S audio, 3 sample rates\n", dev->name);
                break;
        }
 
        if (em_eeprom->chip_conf & 1 << 3)
-               printk(KERN_INFO "USB Remote wakeup capable\n");
+               printk(KERN_INFO "%s:\tUSB Remote wakeup capable\n", dev->name);
 
        if (em_eeprom->chip_conf & 1 << 2)
-               printk(KERN_INFO "USB Self power capable\n");
+               printk(KERN_INFO "%s:\tUSB Self power capable\n", dev->name);
 
        switch (em_eeprom->chip_conf & 0x3) {
        case 0:
-               printk(KERN_INFO "500mA max power\n");
+               printk(KERN_INFO "%s:\t500mA max power\n", dev->name);
                break;
        case 1:
-               printk(KERN_INFO "400mA max power\n");
+               printk(KERN_INFO "%s:\t400mA max power\n", dev->name);
                break;
        case 2:
-               printk(KERN_INFO "300mA max power\n");
+               printk(KERN_INFO "%s:\t300mA max power\n", dev->name);
                break;
        case 3:
-               printk(KERN_INFO "200mA max power\n");
+               printk(KERN_INFO "%s:\t200mA max power\n", dev->name);
                break;
        }
-       printk(KERN_INFO "Table at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
+       printk(KERN_INFO "%s:\tTable at 0x%02x, strings=0x%04x, 0x%04x, 0x%04x\n",
+                               dev->name,
                                em_eeprom->string_idx_table,
                                em_eeprom->string1,
                                em_eeprom->string2,
index 845253c5d2a1b4b5d13169c223d6dec30d3e6d5d..acda76f86ff8223a96ea96b4b70b72c8663d5ca0 100644 (file)
@@ -2272,7 +2272,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
        uif = udev->actconfig->interface[0];
 
        dev->num_alt = uif->num_altsetting;
-       em28xx_info("Alternate settings: %i\n", dev->num_alt);
+       em28xx_videodbg("Alternate settings: %i\n", dev->num_alt);
 /*     dev->alt_max_pkt_size = kmalloc(sizeof(*dev->alt_max_pkt_size)* */
        dev->alt_max_pkt_size = kmalloc(32 * dev->num_alt, GFP_KERNEL);
 
@@ -2288,7 +2288,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
                                                        wMaxPacketSize);
                dev->alt_max_pkt_size[i] =
                    (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
-               em28xx_info("Alternate setting %i, max size= %i\n", i,
+               em28xx_videodbg("Alternate setting %i, max size= %i\n", i,
                                                dev->alt_max_pkt_size[i]);
        }
 
@@ -2304,8 +2304,6 @@ static int em28xx_usb_probe(struct usb_interface *interface,
                return retval;
        }
 
-       em28xx_info("Found %s\n", em28xx_boards[dev->model].name);
-
        /* save our data pointer in this interface device */
        usb_set_intfdata(interface, dev);