jme: Support WoL after shutdown
authorGuo-Fu Tseng <cooldavid@cooldavid.org>
Sun, 24 Oct 2010 23:18:25 +0000 (16:18 -0700)
committerDavid S. Miller <davem@davemloft.net>
Sun, 24 Oct 2010 23:18:25 +0000 (16:18 -0700)
Adding shutdown function that setup wake if wol is enabled.
Add jme_phy_on in jme_set_100m_half in case it is shutting down
or suspending when interface is down(phy_off by default).

v2 updates:
Removed CONFIG_PM ifdef for jme_set_100m_half and jme_wait_link.
It would be nice if it can be applied to net-2.6 along with other patches
sent few days ago. If it is not appropriate, please ignore the net-2.6
request, and apply it to net-next-2.6 as previous patch. :)

Reported-and-helped-by: Сtac <Taoga@yandex.ru>
Signed-off-by: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/jme.c

index d7a975ee2add393010e9db6ad38fbd1c770603a4..d85edf3119c2625d999b22a41b6159ba9ebf7a24 100644 (file)
@@ -1623,12 +1623,12 @@ err_out:
        return rc;
 }
 
-#ifdef CONFIG_PM
 static void
 jme_set_100m_half(struct jme_adapter *jme)
 {
        u32 bmcr, tmp;
 
+       jme_phy_on(jme);
        bmcr = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_BMCR);
        tmp = bmcr & ~(BMCR_ANENABLE | BMCR_SPEED100 |
                       BMCR_SPEED1000 | BMCR_FULLDPLX);
@@ -1656,7 +1656,6 @@ jme_wait_link(struct jme_adapter *jme)
                phylink = jme_linkstat_from_phy(jme);
        }
 }
-#endif
 
 static inline void
 jme_phy_off(struct jme_adapter *jme)
@@ -1664,6 +1663,21 @@ jme_phy_off(struct jme_adapter *jme)
        jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_BMCR, BMCR_PDOWN);
 }
 
+static void
+jme_powersave_phy(struct jme_adapter *jme)
+{
+       if (jme->reg_pmcs) {
+               jme_set_100m_half(jme);
+
+               if (jme->reg_pmcs & (PMCS_LFEN | PMCS_LREN))
+                       jme_wait_link(jme);
+
+               jwrite32(jme, JME_PMCS, jme->reg_pmcs);
+       } else {
+               jme_phy_off(jme);
+       }
+}
+
 static int
 jme_close(struct net_device *netdev)
 {
@@ -2991,6 +3005,16 @@ jme_remove_one(struct pci_dev *pdev)
 
 }
 
+static void
+jme_shutdown(struct pci_dev *pdev)
+{
+       struct net_device *netdev = pci_get_drvdata(pdev);
+       struct jme_adapter *jme = netdev_priv(netdev);
+
+       jme_powersave_phy(jme);
+       pci_pme_active(pdev, true);
+}
+
 #ifdef CONFIG_PM
 static int
 jme_suspend(struct pci_dev *pdev, pm_message_t state)
@@ -3028,19 +3052,9 @@ jme_suspend(struct pci_dev *pdev, pm_message_t state)
        tasklet_hi_enable(&jme->rxempty_task);
 
        pci_save_state(pdev);
-       if (jme->reg_pmcs) {
-               jme_set_100m_half(jme);
-
-               if (jme->reg_pmcs & (PMCS_LFEN | PMCS_LREN))
-                       jme_wait_link(jme);
-
-               jwrite32(jme, JME_PMCS, jme->reg_pmcs);
-
-               pci_enable_wake(pdev, PCI_D3cold, true);
-       } else {
-               jme_phy_off(jme);
-       }
-       pci_set_power_state(pdev, PCI_D3cold);
+       jme_powersave_phy(jme);
+       pci_enable_wake(jme->pdev, PCI_D3hot, true);
+       pci_set_power_state(pdev, PCI_D3hot);
 
        return 0;
 }
@@ -3087,6 +3101,7 @@ static struct pci_driver jme_driver = {
        .suspend        = jme_suspend,
        .resume         = jme_resume,
 #endif /* CONFIG_PM */
+       .shutdown       = jme_shutdown,
 };
 
 static int __init