PCI Hotplug: cpqphp: refactor cpqhp_save_config
authorAlex Chiang <achiang@hp.com>
Tue, 31 Mar 2009 15:23:57 +0000 (09:23 -0600)
committerJesse Barnes <jbarnes@virtuousgeek.org>
Thu, 11 Jun 2009 19:04:13 +0000 (12:04 -0700)
Handle an empty slot at the top of the loop, and continue early.

This allows us to un-indent the rest of the function by one level.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
drivers/pci/hotplug/cpqphp_pci.c

index bd384e94f212844224da504298e8c91a3208e435..2909e3f6caa759ce50ce895fe46c7b8a3d1dcf29 100644 (file)
@@ -359,121 +359,121 @@ int cpqhp_save_config(struct controller *ctrl, int busnumber, int is_hot_plug)
        ctrl->pci_bus->number = busnumber;
        for (device = FirstSupported; device <= LastSupported; device++) {
                ID = 0xFFFFFFFF;
-               rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
+               rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_VENDOR_ID, &ID);
 
-               if (ID != 0xFFFFFFFF) {   /* device in slot */
-                       rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
-                       if (rc)
-                               return rc;
-
-                       rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
-                       if (rc)
-                               return rc;
-
-                       /* If multi-function device, set max_functions to 8 */
-                       if (header_type & 0x80)
-                               max_functions = 8;
-                       else
-                               max_functions = 1;
+               if (ID == 0xFFFFFFFF) {
+                       if (is_hot_plug) {
+                               /* Setup slot structure with entry for empty
+                                * slot
+                                */
+                               new_slot = cpqhp_slot_create(busnumber);
+                               if (new_slot == NULL)
+                                       return 1;
 
-                       function = 0;
+                               new_slot->bus = (u8) busnumber;
+                               new_slot->device = (u8) device;
+                               new_slot->function = 0;
+                               new_slot->is_a_board = 0;
+                               new_slot->presence_save = 0;
+                               new_slot->switch_save = 0;
+                       }
+                       continue;
+               }
 
-                       do {
-                               DevError = 0;
-                               if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
-                                       /* Recurse the subordinate bus
-                                        * get the subordinate bus number
-                                        */
-                                       rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
-                                       if (rc) {
-                                               return rc;
-                                       } else {
-                                               sub_bus = (int) secondary_bus;
+               rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), 0x0B, &class_code);
+               if (rc)
+                       return rc;
 
-                                               /* Save secondary bus cfg spc
-                                                * with this recursive call.
-                                                */
-                                               rc = cpqhp_save_config(ctrl, sub_bus, 0);
-                                               if (rc)
-                                                       return rc;
-                                               ctrl->pci_bus->number = busnumber;
-                                       }
-                               }
+               rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, 0), PCI_HEADER_TYPE, &header_type);
+               if (rc)
+                       return rc;
 
-                               index = 0;
-                               new_slot = cpqhp_slot_find(busnumber, device, index++);
-                               while (new_slot &&
-                                      (new_slot->function != (u8) function))
-                                       new_slot = cpqhp_slot_find(busnumber, device, index++);
+               /* If multi-function device, set max_functions to 8 */
+               if (header_type & 0x80)
+                       max_functions = 8;
+               else
+                       max_functions = 1;
 
-                               if (!new_slot) {
-                                       /* Setup slot structure. */
-                                       new_slot = cpqhp_slot_create(busnumber);
+               function = 0;
 
-                                       if (new_slot == NULL)
-                                               return(1);
-                               }
+               do {
+                       DevError = 0;
+                       if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {
+                               /* Recurse the subordinate bus
+                                * get the subordinate bus number
+                                */
+                               rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_SECONDARY_BUS, &secondary_bus);
+                               if (rc) {
+                                       return rc;
+                               } else {
+                                       sub_bus = (int) secondary_bus;
 
-                               new_slot->bus = (u8) busnumber;
-                               new_slot->device = (u8) device;
-                               new_slot->function = (u8) function;
-                               new_slot->is_a_board = 1;
-                               new_slot->switch_save = 0x10;
-                               /* In case of unsupported board */
-                               new_slot->status = DevError;
-                               new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
-
-                               for (cloop = 0; cloop < 0x20; cloop++) {
-                                       rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+                                       /* Save secondary bus cfg spc
+                                        * with this recursive call.
+                                        */
+                                       rc = cpqhp_save_config(ctrl, sub_bus, 0);
                                        if (rc)
                                                return rc;
+                                       ctrl->pci_bus->number = busnumber;
                                }
+                       }
 
-                               function++;
+                       index = 0;
+                       new_slot = cpqhp_slot_find(busnumber, device, index++);
+                       while (new_slot &&
+                              (new_slot->function != (u8) function))
+                               new_slot = cpqhp_slot_find(busnumber, device, index++);
 
-                               stop_it = 0;
+                       if (!new_slot) {
+                               /* Setup slot structure. */
+                               new_slot = cpqhp_slot_create(busnumber);
+                               if (new_slot == NULL)
+                                       return 1;
+                       }
 
-                               /* this loop skips to the next present function
-                                * reading in Class Code and Header type.
-                                */
+                       new_slot->bus = (u8) busnumber;
+                       new_slot->device = (u8) device;
+                       new_slot->function = (u8) function;
+                       new_slot->is_a_board = 1;
+                       new_slot->switch_save = 0x10;
+                       /* In case of unsupported board */
+                       new_slot->status = DevError;
+                       new_slot->pci_dev = pci_find_slot(new_slot->bus, (new_slot->device << 3) | new_slot->function);
+
+                       for (cloop = 0; cloop < 0x20; cloop++) {
+                               rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), cloop << 2, (u32 *) & (new_slot-> config_space [cloop]));
+                               if (rc)
+                                       return rc;
+                       }
 
-                               while ((function < max_functions)&&(!stop_it)) {
-                                       rc = pci_bus_read_config_dword (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
-                                       if (ID == 0xFFFFFFFF) {  /* nothing there. */
-                                               function++;
-                                       } else {  /* Something there */
-                                               rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
-                                               if (rc)
-                                                       return rc;
+                       function++;
 
-                                               rc = pci_bus_read_config_byte (ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
-                                               if (rc)
-                                                       return rc;
+                       stop_it = 0;
 
-                                               stop_it++;
-                                       }
+                       /* this loop skips to the next present function
+                        * reading in Class Code and Header type.
+                        */
+                       while ((function < max_functions) && (!stop_it)) {
+                               rc = pci_bus_read_config_dword(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_VENDOR_ID, &ID);
+                               if (ID == 0xFFFFFFFF) {
+                                       function++;
+                                       continue;
                                }
+                               rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), 0x0B, &class_code);
+                               if (rc)
+                                       return rc;
 
-                       } while (function < max_functions);
-               }               /* End of IF (device in slot?) */
-               else if (is_hot_plug) {
-                       /* Setup slot structure with entry for empty slot */
-                       new_slot = cpqhp_slot_create(busnumber);
+                               rc = pci_bus_read_config_byte(ctrl->pci_bus, PCI_DEVFN(device, function), PCI_HEADER_TYPE, &header_type);
+                               if (rc)
+                                       return rc;
 
-                       if (new_slot == NULL) {
-                               return(1);
+                               stop_it++;
                        }
 
-                       new_slot->bus = (u8) busnumber;
-                       new_slot->device = (u8) device;
-                       new_slot->function = 0;
-                       new_slot->is_a_board = 0;
-                       new_slot->presence_save = 0;
-                       new_slot->switch_save = 0;
-               }
+               } while (function < max_functions);
        }                       /* End of FOR loop */
 
-       return(0);
+       return 0;
 }