phy: qcom: Add driver for QCOM APQ8064 SATA PHY
authorSrinivas Kandagatla <srinivas.kandagatla@linaro.org>
Mon, 14 Jul 2014 11:17:59 +0000 (12:17 +0100)
committerKishon Vijay Abraham I <kishon@ti.com>
Tue, 22 Jul 2014 07:16:11 +0000 (12:46 +0530)
Add a PHY driver for uses with AHCI based SATA controller driver on the
APQ8064 family of SoCs.

This patch is a forward port from Qualcomm's v3.4 andriod kernel.

Tested on IFC6410 board.

CC: Sujit Reddy Thumma <sthumma@codeaurora.org>
Tested-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
drivers/phy/Kconfig
drivers/phy/Makefile
drivers/phy/phy-qcom-apq8064-sata.c [new file with mode: 0644]

index 778e126700bf2bfe2c8a6b1c41ca85a0318403d9..691115292a992ce8fbed3a4be3ff259a1c73b649 100644 (file)
@@ -177,4 +177,11 @@ config PHY_XGENE
        help
          This option enables support for APM X-Gene SoC multi-purpose PHY.
 
+config PHY_QCOM_APQ8064_SATA
+       tristate "Qualcomm APQ8064 SATA SerDes/PHY driver"
+       depends on ARCH_QCOM
+       depends on HAS_IOMEM
+       depends on OF
+       select GENERIC_PHY
+
 endmenu
index 54f04d04e85d53bc6ec2b686163690561a4aba26..a4819d378619c22788b2f94931abe0f8c3bc3dd7 100644 (file)
@@ -21,3 +21,4 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)  += phy-exynos5250-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)       += phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_XGENE)                        += phy-xgene.o
+obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)    += phy-qcom-apq8064-sata.o
diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/phy-qcom-apq8064-sata.c
new file mode 100644 (file)
index 0000000..c9b4dd6
--- /dev/null
@@ -0,0 +1,288 @@
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+
+/* PHY registers */
+#define UNIPHY_PLL_REFCLK_CFG          0x000
+#define UNIPHY_PLL_PWRGEN_CFG          0x014
+#define UNIPHY_PLL_GLB_CFG             0x020
+#define UNIPHY_PLL_SDM_CFG0            0x038
+#define UNIPHY_PLL_SDM_CFG1            0x03C
+#define UNIPHY_PLL_SDM_CFG2            0x040
+#define UNIPHY_PLL_SDM_CFG3            0x044
+#define UNIPHY_PLL_SDM_CFG4            0x048
+#define UNIPHY_PLL_SSC_CFG0            0x04C
+#define UNIPHY_PLL_SSC_CFG1            0x050
+#define UNIPHY_PLL_SSC_CFG2            0x054
+#define UNIPHY_PLL_SSC_CFG3            0x058
+#define UNIPHY_PLL_LKDET_CFG0          0x05C
+#define UNIPHY_PLL_LKDET_CFG1          0x060
+#define UNIPHY_PLL_LKDET_CFG2          0x064
+#define UNIPHY_PLL_CAL_CFG0            0x06C
+#define UNIPHY_PLL_CAL_CFG8            0x08C
+#define UNIPHY_PLL_CAL_CFG9            0x090
+#define UNIPHY_PLL_CAL_CFG10           0x094
+#define UNIPHY_PLL_CAL_CFG11           0x098
+#define UNIPHY_PLL_STATUS              0x0C0
+
+#define SATA_PHY_SER_CTRL              0x100
+#define SATA_PHY_TX_DRIV_CTRL0         0x104
+#define SATA_PHY_TX_DRIV_CTRL1         0x108
+#define SATA_PHY_TX_IMCAL0             0x11C
+#define SATA_PHY_TX_IMCAL2             0x124
+#define SATA_PHY_RX_IMCAL0             0x128
+#define SATA_PHY_EQUAL                 0x13C
+#define SATA_PHY_OOB_TERM              0x144
+#define SATA_PHY_CDR_CTRL0             0x148
+#define SATA_PHY_CDR_CTRL1             0x14C
+#define SATA_PHY_CDR_CTRL2             0x150
+#define SATA_PHY_CDR_CTRL3             0x154
+#define SATA_PHY_PI_CTRL0              0x168
+#define SATA_PHY_POW_DWN_CTRL0         0x180
+#define SATA_PHY_POW_DWN_CTRL1         0x184
+#define SATA_PHY_TX_DATA_CTRL          0x188
+#define SATA_PHY_ALIGNP                        0x1A4
+#define SATA_PHY_TX_IMCAL_STAT         0x1E4
+#define SATA_PHY_RX_IMCAL_STAT         0x1E8
+
+#define UNIPHY_PLL_LOCK                BIT(0)
+#define SATA_PHY_TX_CAL                BIT(0)
+#define SATA_PHY_RX_CAL                BIT(0)
+
+/* default timeout set to 1 sec */
+#define TIMEOUT_MS             10000
+#define DELAY_INTERVAL_US      100
+
+struct qcom_apq8064_sata_phy {
+       void __iomem *mmio;
+       struct clk *cfg_clk;
+       struct device *dev;
+};
+
+/* Helper function to do poll and timeout */
+static int read_poll_timeout(void __iomem *addr, u32 mask)
+{
+       unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS);
+
+       do {
+               if (readl_relaxed(addr) & mask)
+                       return 0;
+
+                usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
+       } while (!time_after(jiffies, timeout));
+
+       return -ETIMEDOUT;
+}
+
+static int qcom_apq8064_sata_phy_init(struct phy *generic_phy)
+{
+       struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
+       void __iomem *base = phy->mmio;
+       int ret = 0;
+
+       /* SATA phy initialization */
+       writel_relaxed(0x01, base + SATA_PHY_SER_CTRL);
+       writel_relaxed(0xB1, base + SATA_PHY_POW_DWN_CTRL0);
+       /* Make sure the power down happens before power up */
+       mb();
+       usleep_range(10, 60);
+
+       writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
+       writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
+       writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
+       writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
+       writel_relaxed(0x02, base + SATA_PHY_TX_IMCAL2);
+
+       /* Write UNIPHYPLL registers to configure PLL */
+       writel_relaxed(0x04, base + UNIPHY_PLL_REFCLK_CFG);
+       writel_relaxed(0x00, base + UNIPHY_PLL_PWRGEN_CFG);
+
+       writel_relaxed(0x0A, base + UNIPHY_PLL_CAL_CFG0);
+       writel_relaxed(0xF3, base + UNIPHY_PLL_CAL_CFG8);
+       writel_relaxed(0x01, base + UNIPHY_PLL_CAL_CFG9);
+       writel_relaxed(0xED, base + UNIPHY_PLL_CAL_CFG10);
+       writel_relaxed(0x02, base + UNIPHY_PLL_CAL_CFG11);
+
+       writel_relaxed(0x36, base + UNIPHY_PLL_SDM_CFG0);
+       writel_relaxed(0x0D, base + UNIPHY_PLL_SDM_CFG1);
+       writel_relaxed(0xA3, base + UNIPHY_PLL_SDM_CFG2);
+       writel_relaxed(0xF0, base + UNIPHY_PLL_SDM_CFG3);
+       writel_relaxed(0x00, base + UNIPHY_PLL_SDM_CFG4);
+
+       writel_relaxed(0x19, base + UNIPHY_PLL_SSC_CFG0);
+       writel_relaxed(0xE1, base + UNIPHY_PLL_SSC_CFG1);
+       writel_relaxed(0x00, base + UNIPHY_PLL_SSC_CFG2);
+       writel_relaxed(0x11, base + UNIPHY_PLL_SSC_CFG3);
+
+       writel_relaxed(0x04, base + UNIPHY_PLL_LKDET_CFG0);
+       writel_relaxed(0xFF, base + UNIPHY_PLL_LKDET_CFG1);
+
+       writel_relaxed(0x02, base + UNIPHY_PLL_GLB_CFG);
+       /* make sure global config LDO power down happens before power up */
+       mb();
+
+       writel_relaxed(0x03, base + UNIPHY_PLL_GLB_CFG);
+       writel_relaxed(0x05, base + UNIPHY_PLL_LKDET_CFG2);
+
+       /* PLL Lock wait */
+       ret = read_poll_timeout(base + UNIPHY_PLL_STATUS, UNIPHY_PLL_LOCK);
+       if (ret) {
+               dev_err(phy->dev, "poll timeout UNIPHY_PLL_STATUS\n");
+               return ret;
+       }
+
+       /* TX Calibration */
+       ret = read_poll_timeout(base + SATA_PHY_TX_IMCAL_STAT, SATA_PHY_TX_CAL);
+       if (ret) {
+               dev_err(phy->dev, "poll timeout SATA_PHY_TX_IMCAL_STAT\n");
+               return ret;
+       }
+
+       /* RX Calibration */
+       ret = read_poll_timeout(base + SATA_PHY_RX_IMCAL_STAT, SATA_PHY_RX_CAL);
+       if (ret) {
+               dev_err(phy->dev, "poll timeout SATA_PHY_RX_IMCAL_STAT\n");
+               return ret;
+       }
+
+       /* SATA phy calibrated succesfully, power up to functional mode */
+       writel_relaxed(0x3E, base + SATA_PHY_POW_DWN_CTRL1);
+       writel_relaxed(0x01, base + SATA_PHY_RX_IMCAL0);
+       writel_relaxed(0x01, base + SATA_PHY_TX_IMCAL0);
+
+       writel_relaxed(0x00, base + SATA_PHY_POW_DWN_CTRL1);
+       writel_relaxed(0x59, base + SATA_PHY_CDR_CTRL0);
+       writel_relaxed(0x04, base + SATA_PHY_CDR_CTRL1);
+       writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL2);
+       writel_relaxed(0x00, base + SATA_PHY_PI_CTRL0);
+       writel_relaxed(0x00, base + SATA_PHY_CDR_CTRL3);
+       writel_relaxed(0x01, base + SATA_PHY_POW_DWN_CTRL0);
+
+       writel_relaxed(0x11, base + SATA_PHY_TX_DATA_CTRL);
+       writel_relaxed(0x43, base + SATA_PHY_ALIGNP);
+       writel_relaxed(0x04, base + SATA_PHY_OOB_TERM);
+
+       writel_relaxed(0x01, base + SATA_PHY_EQUAL);
+       writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL0);
+       writel_relaxed(0x09, base + SATA_PHY_TX_DRIV_CTRL1);
+
+       return 0;
+}
+
+static int qcom_apq8064_sata_phy_exit(struct phy *generic_phy)
+{
+       struct qcom_apq8064_sata_phy *phy = phy_get_drvdata(generic_phy);
+       void __iomem *base = phy->mmio;
+
+       /* Power down PHY */
+       writel_relaxed(0xF8, base + SATA_PHY_POW_DWN_CTRL0);
+       writel_relaxed(0xFE, base + SATA_PHY_POW_DWN_CTRL1);
+
+       /* Power down PLL block */
+       writel_relaxed(0x00, base + UNIPHY_PLL_GLB_CFG);
+
+       return 0;
+}
+
+static struct phy_ops qcom_apq8064_sata_phy_ops = {
+       .init           = qcom_apq8064_sata_phy_init,
+       .exit           = qcom_apq8064_sata_phy_exit,
+       .owner          = THIS_MODULE,
+};
+
+static int qcom_apq8064_sata_phy_probe(struct platform_device *pdev)
+{
+       struct qcom_apq8064_sata_phy *phy;
+       struct device *dev = &pdev->dev;
+       struct resource *res;
+       struct phy_provider *phy_provider;
+       struct phy *generic_phy;
+       int ret;
+
+       phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+       if (!phy)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       phy->mmio = devm_ioremap_resource(dev, res);
+       if (IS_ERR(phy->mmio))
+               return PTR_ERR(phy->mmio);
+
+       generic_phy = devm_phy_create(dev, &qcom_apq8064_sata_phy_ops, NULL);
+       if (IS_ERR(generic_phy)) {
+               dev_err(dev, "%s: failed to create phy\n", __func__);
+               return PTR_ERR(generic_phy);
+       }
+
+       phy->dev = dev;
+       phy_set_drvdata(generic_phy, phy);
+       platform_set_drvdata(pdev, phy);
+
+       phy->cfg_clk = devm_clk_get(dev, "cfg");
+       if (IS_ERR(phy->cfg_clk)) {
+               dev_err(dev, "Failed to get sata cfg clock\n");
+               return PTR_ERR(phy->cfg_clk);
+       }
+
+       ret = clk_prepare_enable(phy->cfg_clk);
+       if (ret)
+               return ret;
+
+       phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+       if (IS_ERR(phy_provider)) {
+               clk_disable_unprepare(phy->cfg_clk);
+               dev_err(dev, "%s: failed to register phy\n", __func__);
+               return PTR_ERR(phy_provider);
+       }
+
+       return 0;
+}
+
+static int qcom_apq8064_sata_phy_remove(struct platform_device *pdev)
+{
+       struct qcom_apq8064_sata_phy *phy = platform_get_drvdata(pdev);
+
+       clk_disable_unprepare(phy->cfg_clk);
+
+       return 0;
+}
+
+static const struct of_device_id qcom_apq8064_sata_phy_of_match[] = {
+       { .compatible = "qcom,apq8064-sata-phy" },
+       { },
+};
+MODULE_DEVICE_TABLE(of, qcom_apq8064_sata_phy_of_match);
+
+static struct platform_driver qcom_apq8064_sata_phy_driver = {
+       .probe  = qcom_apq8064_sata_phy_probe,
+       .remove = qcom_apq8064_sata_phy_remove,
+       .driver = {
+               .name   = "qcom-apq8064-sata-phy",
+               .owner  = THIS_MODULE,
+               .of_match_table = qcom_apq8064_sata_phy_of_match,
+       }
+};
+module_platform_driver(qcom_apq8064_sata_phy_driver);
+
+MODULE_DESCRIPTION("QCOM apq8064 SATA PHY driver");
+MODULE_LICENSE("GPL v2");