Blackfin: bf533-stamp: add resources for mmc_spi card
authorYi Li <yi.li@analog.com>
Thu, 16 Jul 2009 10:12:30 +0000 (10:12 +0000)
committerMike Frysinger <vapier@gentoo.org>
Thu, 17 Sep 2009 01:31:49 +0000 (21:31 -0400)
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
arch/blackfin/mach-bf533/boards/stamp.c

index 42d4c9fcc12ff8fa5493447932747ff5f615bfdc..e6548a62394028bda2ee6ae01278a9e3a28bfb1b 100644 (file)
@@ -35,6 +35,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
@@ -223,6 +224,34 @@ static struct bfin5xx_spi_chip spidev_chip_info = {
 };
 #endif
 
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT IRQ_PF5
+static int bfin_mmc_spi_init(struct device *dev,
+       irqreturn_t (*detect_int)(int, void *), void *data)
+{
+       return request_irq(MMC_SPI_CARD_DETECT_INT, detect_int,
+               IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+               "mmc-spi-detect", data);
+}
+
+static void bfin_mmc_spi_exit(struct device *dev, void *data)
+{
+       free_irq(MMC_SPI_CARD_DETECT_INT, data);
+}
+
+static struct mmc_spi_platform_data bfin_mmc_spi_pdata = {
+       .init = bfin_mmc_spi_init,
+       .exit = bfin_mmc_spi_exit,
+       .detect_delay = 100, /* msecs */
+};
+
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+       .enable_dma = 0,
+       .bits_per_word = 8,
+       .pio_interrupt = 0,
+};
+#endif
+
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
        {
@@ -286,6 +315,17 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
                .controller_data = &spidev_chip_info,
        },
 #endif
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+       {
+               .modalias = "mmc_spi",
+               .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+               .bus_num = 0,
+               .chip_select = 4,
+               .platform_data = &bfin_mmc_spi_pdata,
+               .controller_data = &mmc_spi_chip_info,
+               .mode = SPI_MODE_3,
+       },
+#endif
 };
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)