regulator: gpio-regulator: Catch 'no states property' misuse
authorLee Jones <lee.jones@linaro.org>
Wed, 14 Nov 2012 11:51:36 +0000 (11:51 +0000)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 14 Nov 2012 11:58:09 +0000 (20:58 +0900)
A selection of voltage or current values (AKA states) should always
be specified when using a GPIO regulator. If there are no switchable
states then the fixed regulators should be used instead.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Documentation/devicetree/bindings/regulator/gpio-regulator.txt
drivers/regulator/gpio-regulator.c

index f71f8083c2ae73f7ce5443cd8d682266dcddb157..63c659800c0320a9b08a8878fcb3ab327f270d9f 100644 (file)
@@ -2,11 +2,12 @@ GPIO controlled regulators
 
 Required properties:
 - compatible           : Must be "regulator-gpio".
+- states               : Selection of available voltages and GPIO configs.
+                          if there are no states, then use a fixed regulator
 
 Optional properties:
 - enable-gpio          : GPIO to use to enable/disable the regulator.
 - gpios                        : GPIO group used to control voltage.
-- states               : Selection of available voltages and GPIO configs.
 - startup-delay-us     : Startup time in microseconds.
 - enable-active-high   : Polarity of GPIO is active high (default is low).
 
index faa2f712eb0da5bc548fc352ae4fcdfbafbe0541..dc9260545b801a7632e25b2c2658beda5897b231 100644 (file)
@@ -183,6 +183,11 @@ of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
 
        /* Fetch states. */
        prop = of_find_property(np, "states", NULL);
+       if (!prop) {
+               dev_err(dev, "No 'states' property found\n");
+               return ERR_PTR(-EINVAL);
+       }
+
        proplen = prop->length / sizeof(int);
 
        config->states = devm_kzalloc(dev,