staging: comedi: cb_pcimdda: use attach_pci callback

Convert this PCI driver to use the comedi PCI auto config attach
mechanism by adding an 'attach_pci' callback function.

This driver does use an external configuration option to determine
the analog output range which is controlled by a jumper on the board.
In order to remove the legacy 'attach' callback, an assumption is made
that the jumper is in the factory setting position for +/-5V outputs.
This does not effect the operation of the board just the range info
that is returned to the user.

A sysfs method will be investigated to allow the user to change the
range.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/cb_pcimdda.c b/drivers/staging/comedi/drivers/cb_pcimdda.c
index 350c8078cded4c5840d4483dd6663e7d668d7d79..ea96514254a1e22e1eea0e55df3a5e8106032547 100644 (file)
--- a/drivers/staging/comedi/drivers/cb_pcimdda.c
+++ b/drivers/staging/comedi/drivers/cb_pcimdda.c
@@ -57,12 +57,7 @@ output modes on the board:
     then issue one comedi_data_read() on any channel on the AO subdevice
     to initiate the simultaneous XFER.
 
-Configuration Options:
-  [0] PCI bus (optional)
-  [1] PCI slot (optional)
-  [2] analog output range jumper setting
-      0 == +/- 5 V
-      1 == +/- 10 V
+Configuration Options: not applicable, uses PCI auto config
 */
 
 /*
@@ -157,47 +152,21 @@ static int cb_pcimdda_ao_rinsn(struct comedi_device *dev,
        return insn->n;
 }
 
-static struct pci_dev *cb_pcimdda_probe(struct comedi_device *dev,
-                                       struct comedi_devconfig *it)
-{
-       struct pci_dev *pcidev = NULL;
-
-       for_each_pci_dev(pcidev) {
-               if (pcidev->vendor != PCI_VENDOR_ID_COMPUTERBOARDS)
-                       continue;
-               if (pcidev->device != PCI_ID_PCIM_DDA06_16)
-                       continue;
-               if (it->options[0] || it->options[1]) {
-                       if (pcidev->bus->number != it->options[0] ||
-                               PCI_SLOT(pcidev->devfn) != it->options[1]) {
-                               continue;
-                       }
-               }
-
-               return pcidev;
-       }
-       return NULL;
-}
-
-static int cb_pcimdda_attach(struct comedi_device *dev,
-                            struct comedi_devconfig *it)
+static int cb_pcimdda_attach_pci(struct comedi_device *dev,
+                                struct pci_dev *pcidev)
 {
        struct cb_pcimdda_private *devpriv;
-       struct pci_dev *pcidev;
        struct comedi_subdevice *s;
        int ret;
 
+       comedi_set_hw_dev(dev, &pcidev->dev);
+       dev->board_name = dev->driver->driver_name;
+
        ret = alloc_private(dev, sizeof(*devpriv));
        if (ret)
                return ret;
        devpriv = dev->private;
 
-       pcidev = cb_pcimdda_probe(dev, it);
-       if (!pcidev)
-               return -EIO;
-       comedi_set_hw_dev(dev, &pcidev->dev);
-       dev->board_name = dev->driver->driver_name;
-
        ret = comedi_pci_enable(pcidev, dev->board_name);
        if (ret)
                return ret;
@@ -208,19 +177,14 @@ static int cb_pcimdda_attach(struct comedi_device *dev,
                return ret;
 
        s = dev->subdevices + 0;
-
        /* analog output subdevice */
-       s->type = COMEDI_SUBD_AO;
-       s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
-       s->n_chan = 6;
-       s->maxdata = 0xffff;
-       /* this is hard-coded here */
-       if (it->options[2])
-               s->range_table = &range_bipolar10;
-       else
-               s->range_table = &range_bipolar5;
-       s->insn_write = &cb_pcimdda_ao_winsn;
-       s->insn_read = &cb_pcimdda_ao_rinsn;
+       s->type         = COMEDI_SUBD_AO;
+       s->subdev_flags = SDF_WRITABLE | SDF_READABLE;
+       s->n_chan       = 6;
+       s->maxdata      = 0xffff;
+       s->range_table  = &range_bipolar5;
+       s->insn_write   = cb_pcimdda_ao_winsn;
+       s->insn_read    = cb_pcimdda_ao_rinsn;
 
        s = dev->subdevices + 1;
        /* digital i/o subdevice */
@@ -243,14 +207,13 @@ static void cb_pcimdda_detach(struct comedi_device *dev)
        if (pcidev) {
                if (dev->iobase)
                        comedi_pci_disable(pcidev);
-               pci_dev_put(pcidev);
        }
 }
 
 static struct comedi_driver cb_pcimdda_driver = {
        .driver_name    = "cb_pcimdda",
        .module         = THIS_MODULE,
-       .attach         = cb_pcimdda_attach,
+       .attach_pci     = cb_pcimdda_attach_pci,
        .detach         = cb_pcimdda_detach,
 };