gianfar: Add flow control support
authorClaudiu Manoil <claudiu.manoil@freescale.com>
Mon, 12 Aug 2013 10:53:26 +0000 (13:53 +0300)
committerDavid S. Miller <davem@davemloft.net>
Tue, 13 Aug 2013 22:28:53 +0000 (15:28 -0700)
eTSEC has Rx and Tx flow control capabilities that may be enabled
through MACCFG1[Rx_Flow, Tx_Flow] bits.  These bits must not be set
however when eTSEC is operated in Half-Duplex mode.  Unfortunately,
the driver currently sets these bits unconditionally.
This patch adds the proper handling of the PAUSE frame capability
register bits by implementing the ethtool -A interface.  When pause
autoneg is enabled, the controller uses the phy's capability to
negotiate PAUSE frame settings with the link partner and reconfigures
its Rx_Flow and Tx_Flow settings to match the capabilities of the
link partner.  If pause autoneg is off, the PAUSE frame generation
may be forced manually (ethtool -A).  Flow control is disabled by
default now.
This implementation is inspired by the tg3 driver.

Signed-off-by: Lutz Jaenicke <ljaenicke@innominate.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/freescale/gianfar.c
drivers/net/ethernet/freescale/gianfar.h
drivers/net/ethernet/freescale/gianfar_ethtool.c

index 3cb464780777cbcbe7b2be4567ed381150d58f0b..b2c91dcd245f7985b66da22346a9b6f7ec5f3fb8 100644 (file)
@@ -1016,7 +1016,14 @@ static int gfar_probe(struct platform_device *ofdev)
        /* We need to delay at least 3 TX clocks */
        udelay(2);
 
-       tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
+       tempval = 0;
+       if (!priv->pause_aneg_en && priv->tx_pause_en)
+               tempval |= MACCFG1_TX_FLOW;
+       if (!priv->pause_aneg_en && priv->rx_pause_en)
+               tempval |= MACCFG1_RX_FLOW;
+       /* the soft reset bit is not self-resetting, so we need to
+        * clear it before resuming normal operation
+        */
        gfar_write(&regs->maccfg1, tempval);
 
        /* Initialize MACCFG2. */
@@ -1460,7 +1467,7 @@ static int init_phy(struct net_device *dev)
        struct gfar_private *priv = netdev_priv(dev);
        uint gigabit_support =
                priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
-               SUPPORTED_1000baseT_Full : 0;
+               GFAR_SUPPORTED_GBIT : 0;
        phy_interface_t interface;
 
        priv->oldlink = 0;
@@ -3023,6 +3030,41 @@ static irqreturn_t gfar_interrupt(int irq, void *grp_id)
        return IRQ_HANDLED;
 }
 
+static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv)
+{
+       struct phy_device *phydev = priv->phydev;
+       u32 val = 0;
+
+       if (!phydev->duplex)
+               return val;
+
+       if (!priv->pause_aneg_en) {
+               if (priv->tx_pause_en)
+                       val |= MACCFG1_TX_FLOW;
+               if (priv->rx_pause_en)
+                       val |= MACCFG1_RX_FLOW;
+       } else {
+               u16 lcl_adv, rmt_adv;
+               u8 flowctrl;
+               /* get link partner capabilities */
+               rmt_adv = 0;
+               if (phydev->pause)
+                       rmt_adv = LPA_PAUSE_CAP;
+               if (phydev->asym_pause)
+                       rmt_adv |= LPA_PAUSE_ASYM;
+
+               lcl_adv = mii_advertise_flowctrl(phydev->advertising);
+
+               flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
+               if (flowctrl & FLOW_CTRL_TX)
+                       val |= MACCFG1_TX_FLOW;
+               if (flowctrl & FLOW_CTRL_RX)
+                       val |= MACCFG1_RX_FLOW;
+       }
+
+       return val;
+}
+
 /* Called every time the controller might need to be made
  * aware of new link state.  The PHY code conveys this
  * information through variables in the phydev structure, and this
@@ -3041,6 +3083,7 @@ static void adjust_link(struct net_device *dev)
        lock_tx_qs(priv);
 
        if (phydev->link) {
+               u32 tempval1 = gfar_read(&regs->maccfg1);
                u32 tempval = gfar_read(&regs->maccfg2);
                u32 ecntrl = gfar_read(&regs->ecntrl);
 
@@ -3089,6 +3132,10 @@ static void adjust_link(struct net_device *dev)
                        priv->oldspeed = phydev->speed;
                }
 
+               tempval1 &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
+               tempval1 |= gfar_get_flowctrl_cfg(priv);
+
+               gfar_write(&regs->maccfg1, tempval1);
                gfar_write(&regs->maccfg2, tempval);
                gfar_write(&regs->ecntrl, ecntrl);
 
index ee19f2c138a60ae82003bcda1cfdae1695ca7b91..46f56f36118f8c34e8fa818dc27e0906c386dfcc 100644 (file)
@@ -146,6 +146,10 @@ extern const char gfar_driver_version[];
                | SUPPORTED_Autoneg \
                | SUPPORTED_MII)
 
+#define GFAR_SUPPORTED_GBIT (SUPPORTED_1000baseT_Full \
+               | SUPPORTED_Pause \
+               | SUPPORTED_Asym_Pause)
+
 /* TBI register addresses */
 #define MII_TBICON             0x11
 
@@ -1100,7 +1104,11 @@ struct gfar_private {
                /* Wake-on-LAN enabled */
                wol_en:1,
                /* Enable priorty based Tx scheduling in Hw */
-               prio_sched_en:1;
+               prio_sched_en:1,
+               /* Flow control flags */
+               pause_aneg_en:1,
+               tx_pause_en:1,
+               rx_pause_en:1;
 
        /* The total tx and rx ring size for the enabled queues */
        unsigned int total_tx_ring_size;
index 21cd88124ca96a2ad3342358531868175c958fc8..d3d7ede27ef14854f11b2f7c4a9648d34574dbeb 100644 (file)
@@ -535,6 +535,78 @@ static int gfar_sringparam(struct net_device *dev,
        return err;
 }
 
+static void gfar_gpauseparam(struct net_device *dev,
+                            struct ethtool_pauseparam *epause)
+{
+       struct gfar_private *priv = netdev_priv(dev);
+
+       epause->autoneg = !!priv->pause_aneg_en;
+       epause->rx_pause = !!priv->rx_pause_en;
+       epause->tx_pause = !!priv->tx_pause_en;
+}
+
+static int gfar_spauseparam(struct net_device *dev,
+                           struct ethtool_pauseparam *epause)
+{
+       struct gfar_private *priv = netdev_priv(dev);
+       struct phy_device *phydev = priv->phydev;
+       struct gfar __iomem *regs = priv->gfargrp[0].regs;
+       u32 oldadv, newadv;
+
+       if (!(phydev->supported & SUPPORTED_Pause) ||
+           (!(phydev->supported & SUPPORTED_Asym_Pause) &&
+            (epause->rx_pause != epause->tx_pause)))
+               return -EINVAL;
+
+       priv->rx_pause_en = priv->tx_pause_en = 0;
+       if (epause->rx_pause) {
+               priv->rx_pause_en = 1;
+
+               if (epause->tx_pause) {
+                       priv->tx_pause_en = 1;
+                       /* FLOW_CTRL_RX & TX */
+                       newadv = ADVERTISED_Pause;
+               } else  /* FLOW_CTLR_RX */
+                       newadv = ADVERTISED_Pause | ADVERTISED_Asym_Pause;
+       } else if (epause->tx_pause) {
+               priv->tx_pause_en = 1;
+               /* FLOW_CTLR_TX */
+               newadv = ADVERTISED_Asym_Pause;
+       } else
+               newadv = 0;
+
+       if (epause->autoneg)
+               priv->pause_aneg_en = 1;
+       else
+               priv->pause_aneg_en = 0;
+
+       oldadv = phydev->advertising &
+               (ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+       if (oldadv != newadv) {
+               phydev->advertising &=
+                       ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause);
+               phydev->advertising |= newadv;
+               if (phydev->autoneg)
+                       /* inform link partner of our
+                        * new flow ctrl settings
+                        */
+                       return phy_start_aneg(phydev);
+
+               if (!epause->autoneg) {
+                       u32 tempval;
+                       tempval = gfar_read(&regs->maccfg1);
+                       tempval &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
+                       if (priv->tx_pause_en)
+                               tempval |= MACCFG1_TX_FLOW;
+                       if (priv->rx_pause_en)
+                               tempval |= MACCFG1_RX_FLOW;
+                       gfar_write(&regs->maccfg1, tempval);
+               }
+       }
+
+       return 0;
+}
+
 int gfar_set_features(struct net_device *dev, netdev_features_t features)
 {
        struct gfar_private *priv = netdev_priv(dev);
@@ -1806,6 +1878,8 @@ const struct ethtool_ops gfar_ethtool_ops = {
        .set_coalesce = gfar_scoalesce,
        .get_ringparam = gfar_gringparam,
        .set_ringparam = gfar_sringparam,
+       .get_pauseparam = gfar_gpauseparam,
+       .set_pauseparam = gfar_spauseparam,
        .get_strings = gfar_gstrings,
        .get_sset_count = gfar_sset_count,
        .get_ethtool_stats = gfar_fill_stats,