PM / OPP: Break _opp_add_dynamic() into smaller functions
authorViresh Kumar <viresh.kumar@linaro.org>
Wed, 29 Jul 2015 10:53:01 +0000 (16:23 +0530)
committerRafael J. Wysocki <rafael.j.wysocki@intel.com>
Fri, 7 Aug 2015 01:04:23 +0000 (03:04 +0200)
Later commits would add support for new OPP bindings and this would be
required then. So, lets do it in a separate patch to make it easily
reviewable.

Another change worth noticing is INIT_LIST_HEAD(&opp->node). We weren't
doing it earlier as we never tried to delete a list node before it is
added to list. But this wouldn't be the case anymore. We might try to
delete a node (just to reuse the same code paths), without it being
getting added to the list.

Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
drivers/base/power/opp.c

index 28d70c9f86eda19068d3f421bd44b47c4756fcbd..0d8dbf21c299beddc08e52032b1ae0593cf7377e 100644 (file)
@@ -484,6 +484,7 @@ static void _kfree_opp_rcu(struct rcu_head *head)
  * _opp_remove()  - Remove an OPP from a table definition
  * @dev_opp:   points back to the device_opp struct this opp belongs to
  * @opp:       pointer to the OPP to remove
+ * @notify:    OPP_EVENT_REMOVE notification should be sent or not
  *
  * This function removes an opp definition from the opp list.
  *
@@ -492,13 +493,14 @@ static void _kfree_opp_rcu(struct rcu_head *head)
  * strategy.
  */
 static void _opp_remove(struct device_opp *dev_opp,
-                       struct dev_pm_opp *opp)
+                       struct dev_pm_opp *opp, bool notify)
 {
        /*
         * Notify the changes in the availability of the operable
         * frequency/voltage list.
         */
-       srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
+       if (notify)
+               srcu_notifier_call_chain(&dev_opp->srcu_head, OPP_EVENT_REMOVE, opp);
        list_del_rcu(&opp->node);
        call_srcu(&dev_opp->srcu_head.srcu, &opp->rcu_head, _kfree_opp_rcu);
 
@@ -544,12 +546,70 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq)
                goto unlock;
        }
 
-       _opp_remove(dev_opp, opp);
+       _opp_remove(dev_opp, opp, true);
 unlock:
        mutex_unlock(&dev_opp_list_lock);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_remove);
 
+static struct dev_pm_opp *_allocate_opp(struct device *dev,
+                                       struct device_opp **dev_opp)
+{
+       struct dev_pm_opp *opp;
+
+       /* allocate new OPP node */
+       opp = kzalloc(sizeof(*opp), GFP_KERNEL);
+       if (!opp)
+               return NULL;
+
+       INIT_LIST_HEAD(&opp->node);
+
+       *dev_opp = _add_device_opp(dev);
+       if (!*dev_opp) {
+               kfree(opp);
+               return NULL;
+       }
+
+       return opp;
+}
+
+static int _opp_add(struct dev_pm_opp *new_opp, struct device_opp *dev_opp)
+{
+       struct dev_pm_opp *opp;
+       struct list_head *head = &dev_opp->opp_list;
+
+       /*
+        * Insert new OPP in order of increasing frequency and discard if
+        * already present.
+        *
+        * Need to use &dev_opp->opp_list in the condition part of the 'for'
+        * loop, don't replace it with head otherwise it will become an infinite
+        * loop.
+        */
+       list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) {
+               if (new_opp->rate > opp->rate) {
+                       head = &opp->node;
+                       continue;
+               }
+
+               if (new_opp->rate < opp->rate)
+                       break;
+
+               /* Duplicate OPPs */
+               dev_warn(dev_opp->dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
+                        __func__, opp->rate, opp->u_volt, opp->available,
+                        new_opp->rate, new_opp->u_volt, new_opp->available);
+
+               return opp->available && new_opp->u_volt == opp->u_volt ?
+                       0 : -EEXIST;
+       }
+
+       new_opp->dev_opp = dev_opp;
+       list_add_rcu(&new_opp->node, head);
+
+       return 0;
+}
+
 /**
  * _opp_add_dynamic() - Allocate a dynamic OPP.
  * @dev:       device for which we do this operation
@@ -581,62 +641,28 @@ static int _opp_add_dynamic(struct device *dev, unsigned long freq,
                            long u_volt, bool dynamic)
 {
        struct device_opp *dev_opp;
-       struct dev_pm_opp *opp, *new_opp;
-       struct list_head *head;
+       struct dev_pm_opp *new_opp;
        int ret;
 
-       /* allocate new OPP node */
-       new_opp = kzalloc(sizeof(*new_opp), GFP_KERNEL);
-       if (!new_opp)
-               return -ENOMEM;
-
        /* Hold our list modification lock here */
        mutex_lock(&dev_opp_list_lock);
 
+       new_opp = _allocate_opp(dev, &dev_opp);
+       if (!new_opp) {
+               ret = -ENOMEM;
+               goto unlock;
+       }
+
        /* populate the opp table */
        new_opp->rate = freq;
        new_opp->u_volt = u_volt;
        new_opp->available = true;
+       new_opp->dynamic = dynamic;
 
-       dev_opp = _add_device_opp(dev);
-       if (!dev_opp) {
-               ret = -ENOMEM;
-               goto free_opp;
-       }
-
-       /*
-        * Insert new OPP in order of increasing frequency
-        * and discard if already present
-        */
-       head = &dev_opp->opp_list;
-
-       /*
-        * Need to use &dev_opp->opp_list in the condition part of the 'for'
-        * loop, don't replace it with head otherwise it will become an infinite
-        * loop.
-        */
-       list_for_each_entry_rcu(opp, &dev_opp->opp_list, node) {
-               if (new_opp->rate > opp->rate) {
-                       head = &opp->node;
-                       continue;
-               }
-
-               if (new_opp->rate < opp->rate)
-                       break;
-
-               /* Duplicate OPPs */
-               ret = opp->available && new_opp->u_volt == opp->u_volt ?
-                       0 : -EEXIST;
-
-               dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
-                        __func__, opp->rate, opp->u_volt, opp->available,
-                        new_opp->rate, new_opp->u_volt, new_opp->available);
+       ret = _opp_add(new_opp, dev_opp);
+       if (ret)
                goto free_opp;
-       }
 
-       new_opp->dynamic = dynamic;
-       new_opp->dev_opp = dev_opp;
-       list_add_rcu(&new_opp->node, head);
        mutex_unlock(&dev_opp_list_lock);
 
        /*
@@ -647,8 +673,9 @@ static int _opp_add_dynamic(struct device *dev, unsigned long freq,
        return 0;
 
 free_opp:
+       _opp_remove(dev_opp, new_opp, false);
+unlock:
        mutex_unlock(&dev_opp_list_lock);
-       kfree(new_opp);
        return ret;
 }
 
@@ -876,7 +903,7 @@ void of_free_opp_table(struct device *dev)
        /* Free static OPPs */
        list_for_each_entry_safe(opp, tmp, &dev_opp->opp_list, node) {
                if (!opp->dynamic)
-                       _opp_remove(dev_opp, opp);
+                       _opp_remove(dev_opp, opp, true);
        }
 
        mutex_unlock(&dev_opp_list_lock);