ALSA: hda - Add control to suppress the dynamic pin-power for VIA
authorTakashi Iwai <tiwai@suse.de>
Fri, 17 Jun 2011 14:59:21 +0000 (16:59 +0200)
committerTakashi Iwai <tiwai@suse.de>
Mon, 20 Jun 2011 14:23:55 +0000 (16:23 +0200)
Currently VIA driver controls the power-state of each pin per jack
detection.  But, it means that the power-state mismatch may occur when
the machine doesn't give the proper jack-detection.

For avoiding this problem, a new control element "Dynamic Power-Control"
is provided so that user can turn on/off the pin-power control.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/pci/hda/patch_via.c

index 995974d0b120ddd84d1d665ee23ebe3d75756347..8a9791ab43c0340815577a3706fe38ccfb58eeda 100644 (file)
@@ -153,6 +153,7 @@ struct via_spec {
        unsigned int hp_independent_mode_index;
        unsigned int smart51_enabled;
        unsigned int dmic_enabled;
+       unsigned int no_pin_power_ctl;
        enum VIA_HDA_CODEC codec_type;
 
        /* work to check hp jack state */
@@ -605,8 +606,12 @@ static void set_pin_power_state(struct hda_codec *codec, hda_nid_t nid,
        unsigned no_presence = (def_conf & AC_DEFCFG_MISC)
                >> AC_DEFCFG_MISC_SHIFT
                & AC_DEFCFG_MISC_NO_PRESENCE; /* do not support pin sense */
-       unsigned present = snd_hda_jack_detect(codec, nid);
        struct via_spec *spec = codec->spec;
+       unsigned present = 0;
+
+       no_presence |= spec->no_pin_power_ctl;
+       if (!no_presence)
+               present = snd_hda_jack_detect(codec, nid);
        if ((spec->smart51_enabled && is_smart51_pins(spec, nid))
            || ((no_presence || present)
                && get_defcfg_connect(def_conf) != AC_JACK_PORT_NONE)) {
@@ -618,6 +623,55 @@ static void set_pin_power_state(struct hda_codec *codec, hda_nid_t nid,
        snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_POWER_STATE, parm);
 }
 
+static int via_pin_power_ctl_info(struct snd_kcontrol *kcontrol,
+                                 struct snd_ctl_elem_info *uinfo)
+{
+       static const char * const texts[] = {
+               "Disabled", "Enabled"
+       };
+
+       uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+       uinfo->count = 1;
+       uinfo->value.enumerated.items = 2;
+       if (uinfo->value.enumerated.item >= uinfo->value.enumerated.items)
+               uinfo->value.enumerated.item = uinfo->value.enumerated.items - 1;
+       strcpy(uinfo->value.enumerated.name,
+              texts[uinfo->value.enumerated.item]);
+       return 0;
+}
+
+static int via_pin_power_ctl_get(struct snd_kcontrol *kcontrol,
+                                struct snd_ctl_elem_value *ucontrol)
+{
+       struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+       struct via_spec *spec = codec->spec;
+       ucontrol->value.enumerated.item[0] = !spec->no_pin_power_ctl;
+       return 0;
+}
+
+static int via_pin_power_ctl_put(struct snd_kcontrol *kcontrol,
+                                struct snd_ctl_elem_value *ucontrol)
+{
+       struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+       struct via_spec *spec = codec->spec;
+       unsigned int val = !ucontrol->value.enumerated.item[0];
+
+       if (val == spec->no_pin_power_ctl)
+               return 0;
+       spec->no_pin_power_ctl = val;
+       set_widgets_power_state(codec);
+       return 1;
+}
+
+static const struct snd_kcontrol_new via_pin_power_ctl_enum = {
+       .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+       .name = "Dynamic Power-Control",
+       .info = via_pin_power_ctl_info,
+       .get = via_pin_power_ctl_get,
+       .put = via_pin_power_ctl_put,
+};
+
+
 /*
  * input MUX handling
  */
@@ -1480,6 +1534,10 @@ static int via_build_controls(struct hda_codec *codec)
        const struct snd_kcontrol_new *knew;
        int err, i;
 
+       if (spec->set_widgets_power_state)
+               if (!via_clone_control(spec, &via_pin_power_ctl_enum))
+                       return -ENOMEM;
+
        for (i = 0; i < spec->num_mixers; i++) {
                err = snd_hda_add_new_ctls(codec, spec->mixers[i]);
                if (err < 0)