ARM: shmobile: kzm9g: add AS3711 PMIC platform data

KZM9G uses an AS3711 PMIC to supply power to the CPU and the LCD backlight.
The PMIC on the board is pre-programmed to supply correct voltages to the
CPU, power supply to the backlight has to be turned on at run-time. The
latter is currently performed by a hard-coded I2C command sequence in the
board file. This patch removes the backlight hack and instead adds an I2C
device to instantiate the AS3711 MFD driver, which will add a regulator
device to dynamically adjust CPU voltages and a backlight device.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index 1fdf05cb6da1b00f7c6c06d8f77b1fc004dda3b8..165483c9bee2f16e9695c9ace463b3ac31f62a05 100644 (file)
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -29,6 +29,7 @@
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/as3711.h>
 #include <linux/mfd/tmio.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/pinctrl/pinconf-generic.h>
@@ -606,6 +607,140 @@ static struct platform_device fsi_ak4648_device = {
 };
 
 /* I2C */
+
+/* StepDown1 is used to supply 1.315V to the CPU */
+static struct regulator_init_data as3711_sd1 = {
+       .constraints = {
+               .name = "1.315V CPU",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 1315000,
+               .max_uV = 1335000,
+       },
+};
+
+/* StepDown2 is used to supply 1.8V to the CPU and to the board */
+static struct regulator_init_data as3711_sd2 = {
+       .constraints = {
+               .name = "1.8V",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 1800000,
+               .max_uV = 1800000,
+       },
+};
+
+/*
+ * StepDown3 is switched in parallel with StepDown2, seems to be off,
+ * according to read-back pre-set register values
+ */
+
+/* StepDown4 is used to supply 1.215V to the CPU and to the board */
+static struct regulator_init_data as3711_sd4 = {
+       .constraints = {
+               .name = "1.215V",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 1215000,
+               .max_uV = 1235000,
+       },
+};
+
+/* LDO1 is unused and unconnected */
+
+/* LDO2 is used to supply 2.8V to the CPU */
+static struct regulator_init_data as3711_ldo2 = {
+       .constraints = {
+               .name = "2.8V CPU",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 2800000,
+               .max_uV = 2800000,
+       },
+};
+
+/* LDO3 is used to supply 3.0V to the CPU */
+static struct regulator_init_data as3711_ldo3 = {
+       .constraints = {
+               .name = "3.0V CPU",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 3000000,
+               .max_uV = 3000000,
+       },
+};
+
+/* LDO4 is used to supply 2.8V to the board */
+static struct regulator_init_data as3711_ldo4 = {
+       .constraints = {
+               .name = "2.8V",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 2800000,
+               .max_uV = 2800000,
+       },
+};
+
+/* LDO5 is switched parallel to LDO4, also set to 2.8V */
+static struct regulator_init_data as3711_ldo5 = {
+       .constraints = {
+               .name = "2.8V #2",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 2800000,
+               .max_uV = 2800000,
+       },
+};
+
+/* LDO6 is unused and unconnected */
+
+/* LDO7 is used to supply 1.15V to the CPU */
+static struct regulator_init_data as3711_ldo7 = {
+       .constraints = {
+               .name = "1.15V CPU",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 1150000,
+               .max_uV = 1150000,
+       },
+};
+
+/* LDO8 is switched parallel to LDO7, also set to 1.15V */
+static struct regulator_init_data as3711_ldo8 = {
+       .constraints = {
+               .name = "1.15V CPU #2",
+               .boot_on = 1,
+               .always_on = 1,
+               .min_uV = 1150000,
+               .max_uV = 1150000,
+       },
+};
+
+static struct as3711_platform_data as3711_pdata = {
+       .regulator      = {
+               .init_data      = {
+                       [AS3711_REGULATOR_SD_1] = &as3711_sd1,
+                       [AS3711_REGULATOR_SD_2] = &as3711_sd2,
+                       [AS3711_REGULATOR_SD_4] = &as3711_sd4,
+                       [AS3711_REGULATOR_LDO_2] = &as3711_ldo2,
+                       [AS3711_REGULATOR_LDO_3] = &as3711_ldo3,
+                       [AS3711_REGULATOR_LDO_4] = &as3711_ldo4,
+                       [AS3711_REGULATOR_LDO_5] = &as3711_ldo5,
+                       [AS3711_REGULATOR_LDO_7] = &as3711_ldo7,
+                       [AS3711_REGULATOR_LDO_8] = &as3711_ldo8,
+               },
+       },
+       .backlight      = {
+               .su2_fb = "sh_mobile_lcdc_fb.0",
+               .su2_max_uA = 36000,
+               .su2_feedback = AS3711_SU2_CURR_AUTO,
+               .su2_fbprot = AS3711_SU2_GPIO4,
+               .su2_auto_curr1 = true,
+               .su2_auto_curr2 = true,
+               .su2_auto_curr3 = true,
+       },
+};
+
 static struct pcf857x_platform_data pcf8575_pdata = {
        .gpio_base      = GPIO_PCF8575_BASE,
 };
@@ -625,6 +760,11 @@ static struct i2c_board_info i2c0_devices[] = {
                I2C_BOARD_INFO("adxl34x", 0x1d),
                .irq = irq_pin(26), /* IRQ26 */
        },
+       {
+               I2C_BOARD_INFO("as3711", 0x40),
+               .irq = intcs_evt2irq(0x3300), /* IRQ24 */
+               .platform_data = &as3711_pdata,
+       },
 };
 
 static struct i2c_board_info i2c1_devices[] = {
@@ -715,59 +855,6 @@ static const struct pinctrl_map kzm_pinctrl_map[] = {
                                  "usb_vbus", "usb"),
 };
 
-/*
- * FIXME
- *
- * This is quick hack for enabling LCDC backlight
- */
-static int __init as3711_enable_lcdc_backlight(void)
-{
-       struct i2c_adapter *a = i2c_get_adapter(0);
-       struct i2c_msg msg;
-       int i, ret;
-       __u8 magic[] = {
-               0x40, 0x2a,
-               0x43, 0x3c,
-               0x44, 0x3c,
-               0x45, 0x3c,
-               0x54, 0x03,
-               0x51, 0x00,
-               0x51, 0x01,
-               0xff, 0x00, /* wait */
-               0x43, 0xf0,
-               0x44, 0xf0,
-               0x45, 0xf0,
-       };
-
-       if (!of_machine_is_compatible("renesas,kzm9g"))
-               return 0;
-
-       if (!a)
-               return 0;
-
-       msg.addr        = 0x40;
-       msg.len         = 2;
-       msg.flags       = 0;
-
-       for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
-               msg.buf = magic + i;
-
-               if (0xff == msg.buf[0]) {
-                       udelay(500);
-                       continue;
-               }
-
-               ret = i2c_transfer(a, &msg, 1);
-               if (ret < 0) {
-                       pr_err("i2c transfer fail\n");
-                       break;
-               }
-       }
-
-       return 0;
-}
-device_initcall(as3711_enable_lcdc_backlight);
-
 static void __init kzm_init(void)
 {
        regulator_register_always_on(2, "fixed-1.8V", fixed1v8_power_consumers,