ehci: Check individual port status registers on resume
authorMatthew Garrett <mjg@redhat.com>
Tue, 11 Jan 2011 17:26:48 +0000 (12:26 -0500)
committerGreg Kroah-Hartman <gregkh@suse.de>
Fri, 25 Feb 2011 19:32:13 +0000 (11:32 -0800)
If a device plug/unplug is detected on an ATI SB700 USB controller in D3,
it appears to set the port status register but not the controller status
register. As a result we'll fail to detect the plug event. Check the port
status register on resume as well in order to catch this case.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable <stable@kernel.org> [after .39-rc1 is out]
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ehci-hub.c

index c0b37fedfbc2b8ffaadfee08b72adf9b39abe56b..ae0140dd9b9b59ff1518e77864832d99c28f8cdd 100644 (file)
@@ -106,6 +106,27 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
        ehci->owned_ports = 0;
 }
 
+static int ehci_port_change(struct ehci_hcd *ehci)
+{
+       int i = HCS_N_PORTS(ehci->hcs_params);
+
+       /* First check if the controller indicates a change event */
+
+       if (ehci_readl(ehci, &ehci->regs->status) & STS_PCD)
+               return 1;
+
+       /*
+        * Not all controllers appear to update this while going from D3 to D0,
+        * so check the individual port status registers as well
+        */
+
+       while (i--)
+               if (ehci_readl(ehci, &ehci->regs->port_status[i]) & PORT_CSC)
+                       return 1;
+
+       return 0;
+}
+
 static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
                bool suspending, bool do_wakeup)
 {
@@ -173,7 +194,7 @@ static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
        }
 
        /* Does the root hub have a port wakeup pending? */
-       if (!suspending && (ehci_readl(ehci, &ehci->regs->status) & STS_PCD))
+       if (!suspending && ehci_port_change(ehci))
                usb_hcd_resume_root_hub(ehci_to_hcd(ehci));
 
        spin_unlock_irqrestore(&ehci->lock, flags);