[media] cx18: Make RF analog TV work for newer HVR-1600 models with silicon tuners
authorAndy Walls <awalls@md.metrocast.net>
Sun, 27 Mar 2011 03:20:37 +0000 (00:20 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Fri, 20 May 2011 12:26:54 +0000 (09:26 -0300)
A previous changes which added the newer model HVR-1600's and DTV support for
them, neglected to add RF analog TV for them.  Fix RF analog TV for the newer
HVR-1600's which have a worldwide analog tuner assembly with a TDA18271 tuner
and TDA8295 demodulator.

Thanks go to Jeff Campbell and Mike Bradley for reproting the problem, and
also to Mike Bradley for doing a lot of the legwork to figure out the tuner
reset GPIO line, the demodulator I2C address, and that the GPIOs have to be
reinitialized after a cardtype switch.

Reported-by: Jeff Campbell <jac1dlists@gmail.com>
Tested-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/cx18/Kconfig
drivers/media/video/cx18/cx18-cards.c
drivers/media/video/cx18/cx18-cards.h
drivers/media/video/cx18/cx18-driver.c

index d9d2f6ad6ffbcfb66797cf93abf32b35220479b8..d788ad6f5c489cce3643a67d196ab4e9a92a03a2 100644 (file)
@@ -9,6 +9,9 @@ config VIDEO_CX18
        select VIDEO_CS5345
        select DVB_S5H1409 if !DVB_FE_CUSTOMISE
        select MEDIA_TUNER_MXL5005S if !MEDIA_TUNER_CUSTOMISE
+       select DVB_S5H1411 if !DVB_FE_CUSTOMISE
+       select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE
+       select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE
        ---help---
          This is a video4linux driver for Conexant cx23418 based
          PCI combo video recorder devices.
index 68ad1963f421c59be2b5f34e518d76e94c8fc120..c07c849b1aaf561bad3448ef88821acbefe83af8 100644 (file)
@@ -39,6 +39,16 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = {
        .tv    = { 0x61, 0x60, I2C_CLIENT_END },
 };
 
+/*
+ * usual i2c tuner addresses to probe with additional demod address for
+ * an NXP TDA8295 at 0x42 (N.B. it can possibly be at 0x4b or 0x4c too).
+ */
+static struct cx18_card_tuner_i2c cx18_i2c_nxp = {
+       .radio = { I2C_CLIENT_END },
+       .demod = { 0x42, 0x43, I2C_CLIENT_END },
+       .tv    = { 0x61, 0x60, I2C_CLIENT_END },
+};
+
 /* Please add new PCI IDs to: http://pci-ids.ucw.cz/
    This keeps the PCI ID database up to date. Note that the entries
    must be added under vendor 0x4444 (Conexant) as subsystem IDs.
@@ -131,15 +141,15 @@ static const struct cx18_card cx18_card_hvr1600_s5h1411 = {
                .tune_lane = 0,
                .initial_emrs = 0,
        },
-       .gpio_init.initial_value = 0x3001,
-       .gpio_init.direction = 0x3001,
+       .gpio_init.initial_value = 0x3801,
+       .gpio_init.direction = 0x3801,
        .gpio_i2c_slave_reset = {
-               .active_lo_mask = 0x3001,
+               .active_lo_mask = 0x3801,
                .msecs_asserted = 10,
                .msecs_recovery = 40,
                .ir_reset_mask  = 0x0001,
        },
-       .i2c = &cx18_i2c_std,
+       .i2c = &cx18_i2c_nxp,
 };
 
 static const struct cx18_card cx18_card_hvr1600_samsung = {
index 3e750068f275ed7edb46277370c584d177e83917..add7391ecabaa164af08ddf3bfa4c9f229a091eb 100644 (file)
@@ -109,7 +109,7 @@ struct cx18_card_tuner {
 
 struct cx18_card_tuner_i2c {
        unsigned short radio[2];/* radio tuner i2c address to probe */
-       unsigned short demod[2];/* demodulator i2c address to probe */
+       unsigned short demod[3];/* demodulator i2c address to probe */
        unsigned short tv[4];   /* tv tuner i2c addresses to probe */
 };
 
index 841ea4ef6200798e462c387cbeb37c64ce4edf69..9e2f870f4258665ae6093c762f752d45147a8c98 100644 (file)
@@ -423,7 +423,16 @@ static void cx18_process_eeprom(struct cx18 *cx)
                return;
 
        /* autodetect tuner standard */
-       if (tv.tuner_formats & V4L2_STD_PAL) {
+#define TVEEPROM_TUNER_FORMAT_ALL (V4L2_STD_B  | V4L2_STD_GH | \
+                                  V4L2_STD_MN | \
+                                  V4L2_STD_PAL_I | \
+                                  V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC | \
+                                  V4L2_STD_DK)
+       if ((tv.tuner_formats & TVEEPROM_TUNER_FORMAT_ALL)
+                                       == TVEEPROM_TUNER_FORMAT_ALL) {
+               CX18_DEBUG_INFO("Worldwide tuner detected\n");
+               cx->std = V4L2_STD_ALL;
+       } else if (tv.tuner_formats & V4L2_STD_PAL) {
                CX18_DEBUG_INFO("PAL tuner detected\n");
                cx->std |= V4L2_STD_PAL_BG | V4L2_STD_PAL_H;
        } else if (tv.tuner_formats & V4L2_STD_NTSC) {
@@ -1001,7 +1010,15 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
        if (cx->card->hw_all & CX18_HW_TVEEPROM) {
                /* Based on the model number the cardtype may be changed.
                   The PCI IDs are not always reliable. */
+               const struct cx18_card *orig_card = cx->card;
                cx18_process_eeprom(cx);
+
+               if (cx->card != orig_card) {
+                       /* Changed the cardtype; re-reset the I2C chips */
+                       cx18_gpio_init(cx);
+                       cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
+                                       core, reset, (u32) CX18_GPIO_RESET_I2C);
+               }
        }
        if (cx->card->comment)
                CX18_INFO("%s", cx->card->comment);
@@ -1087,6 +1104,8 @@ static int __devinit cx18_probe(struct pci_dev *pci_dev,
        /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
           are not. */
        cx->tuner_std = cx->std;
+       if (cx->std == V4L2_STD_ALL)
+               cx->std = V4L2_STD_NTSC_M;
 
        retval = cx18_streams_setup(cx);
        if (retval) {
@@ -1133,6 +1152,7 @@ int cx18_init_on_first_open(struct cx18 *cx)
        int fw_retry_count = 3;
        struct v4l2_frequency vf;
        struct cx18_open_id fh;
+       v4l2_std_id std;
 
        fh.cx = cx;
 
@@ -1220,7 +1240,8 @@ int cx18_init_on_first_open(struct cx18 *cx)
        /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
           in one place. */
        cx->std++;              /* Force full standard initialization */
-       cx18_s_std(NULL, &fh, &cx->tuner_std);
+       std = (cx->tuner_std == V4L2_STD_ALL) ? V4L2_STD_NTSC_M : cx->tuner_std;
+       cx18_s_std(NULL, &fh, &std);
        cx18_s_frequency(NULL, &fh, &vf);
        return 0;
 }