igb: Add support of SerDes Forced mode for certain hardware
authorCarolyn Wyborny <carolyn.wyborny@intel.com>
Tue, 24 May 2011 06:52:51 +0000 (06:52 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tue, 12 Jul 2011 01:43:00 +0000 (18:43 -0700)
This patch changes the serdes link code to support a forced mode for
some hardware, based on bit set in EEPROM.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/igb/e1000_82575.c
drivers/net/igb/e1000_82575.h
drivers/net/igb/e1000_defines.h

index 7b7e1571fa5ed2a45366013b4ac4fb43b1752ff6..c0857bdfb03ad4d6c56b94fb18328ae6c4b42041 100644 (file)
@@ -1156,10 +1156,13 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
 {
        u32 ctrl_ext, ctrl_reg, reg;
        bool pcs_autoneg;
+       s32 ret_val = E1000_SUCCESS;
+       u16 data;
 
        if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
            !igb_sgmii_active_82575(hw))
-               return 0;
+               return ret_val;
+
 
        /*
         * On the 82575, SerDes loopback mode persists until it is
@@ -1203,6 +1206,18 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
                /* disable PCS autoneg and support parallel detect only */
                pcs_autoneg = false;
        default:
+               if (hw->mac.type == e1000_82575 ||
+                   hw->mac.type == e1000_82576) {
+                       ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
+                       if (ret_val) {
+                               printk(KERN_DEBUG "NVM Read Error\n\n");
+                               return ret_val;
+                       }
+
+                       if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
+                               pcs_autoneg = false;
+               }
+
                /*
                 * non-SGMII modes only supports a speed of 1000/Full for the
                 * link so it is best to just force the MAC and let the pcs
@@ -1250,7 +1265,7 @@ static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
        if (!igb_sgmii_active_82575(hw))
                igb_force_mac_fc(hw);
 
-       return 0;
+       return ret_val;
 }
 
 /**
index fd28d62470e1b6e06541c00ea176214b7d570ba7..786e110011a3e72ebea8e1d900213f3d6fc4bc6c 100644 (file)
@@ -243,6 +243,8 @@ struct e1000_adv_tx_context_desc {
 #define E1000_DTXCTL_MDP_EN     0x0020
 #define E1000_DTXCTL_SPOOF_INT  0x0040
 
+#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT   (1 << 14)
+
 #define ALL_QUEUES   0xFFFF
 
 /* RX packet buffer size defines */
index 446eb5cb25e134a680ef2cba8b20c2259472def6..2cd4082c86ca88a30eaae5e8d934e0ac5e571f7a 100644 (file)
 #define E1000_RAH_POOL_1 0x00040000
 
 /* Error Codes */
+#define E1000_SUCCESS      0
 #define E1000_ERR_NVM      1
 #define E1000_ERR_PHY      2
 #define E1000_ERR_CONFIG   3
 #define E1000_NVM_POLL_READ     0    /* Flag for polling for read complete */
 
 /* NVM Word Offsets */
-#define NVM_ID_LED_SETTINGS        0x0004
-/* For SERDES output amplitude adjustment. */
+#define NVM_COMPAT                 0x0003
+#define NVM_ID_LED_SETTINGS        0x0004 /* SERDES output amplitude */
 #define NVM_INIT_CONTROL2_REG      0x000F
 #define NVM_INIT_CONTROL3_PORT_B   0x0014
 #define NVM_INIT_CONTROL3_PORT_A   0x0024