Add ipw2100 wireless driver.
authorJames Ketrenos <jketreno@linux.intel.com>
Wed, 23 Mar 2005 23:32:29 +0000 (17:32 -0600)
committerJeff Garzik <jgarzik@pobox.com>
Sat, 28 May 2005 01:57:53 +0000 (21:57 -0400)
Documentation/networking/README.ipw2100 [new file with mode: 0644]
drivers/net/wireless/Kconfig
drivers/net/wireless/Makefile
drivers/net/wireless/ipw2100.c [new file with mode: 0644]
drivers/net/wireless/ipw2100.h [new file with mode: 0644]

diff --git a/Documentation/networking/README.ipw2100 b/Documentation/networking/README.ipw2100
new file mode 100644 (file)
index 0000000..2046948
--- /dev/null
@@ -0,0 +1,246 @@
+
+===========================
+Intel(R) PRO/Wireless 2100 Network Connection Driver for Linux
+README.ipw2100
+
+March 14, 2005
+
+===========================
+Index
+---------------------------
+0. Introduction
+1. Release 1.1.0 Current Features
+2. Command Line Parameters
+3. Sysfs Helper Files
+4. Radio Kill Switch
+5. Dynamic Firmware
+6. Power Management
+7. Support
+8. License
+
+
+===========================
+0. Introduction
+------------ -----   -----       ----       ---       --         -     
+
+This document provides a brief overview of the features supported by the 
+IPW2100 driver project.  The main project website, where the latest 
+development version of the driver can be found, is:
+
+       http://ipw2100.sourceforge.net
+
+There you can find the not only the latest releases, but also information about
+potential fixes and patches, as well as links to the development mailing list
+for the driver project.
+
+
+===========================
+1. Release 1.1.0 Current Supported Features
+---------------------------     
+- Managed (BSS) and Ad-Hoc (IBSS)
+- WEP (shared key and open)
+- Wireless Tools support 
+- 802.1x (tested with XSupplicant 1.0.1)
+
+Enabled (but not supported) features:
+- Monitor/RFMon mode
+- WPA/WPA2
+
+The distinction between officially supported and enabled is a reflection
+on the amount of validation and interoperability testing that has been
+performed on a given feature.
+
+
+===========================
+2. Command Line Parameters
+---------------------------     
+
+If the driver is built as a module, the following optional parameters are used
+by entering them on the command line with the modprobe command using this
+syntax:
+
+       modprobe ipw2100 [<option>=<VAL1><,VAL2>...]
+
+For example, to disable the radio on driver loading, enter:
+
+       modprobe ipw2100 disable=1
+
+The ipw2100 driver supports the following module parameters:
+
+Name           Value           Example:
+debug          0x0-0xffffffff  debug=1024
+mode           0,1,2           mode=1   /* AdHoc */
+channel                int             channel=3 /* Only valid in AdHoc or Monitor */
+associate      boolean         associate=0 /* Do NOT auto associate */
+disable                boolean         disable=1 /* Do not power the HW */
+
+
+===========================
+3. Sysfs Helper Files
+---------------------------     
+
+There are several ways to control the behavior of the driver.  Many of the 
+general capabilities are exposed through the Wireless Tools (iwconfig).  There
+are a few capabilities that are exposed through entries in the Linux Sysfs.
+
+
+----- Driver Level ------
+For the driver level files, look in /sys/bus/pci/drivers/ipw2100/
+
+  debug_level  
+       
+       This controls the same global as the 'debug' module parameter.  For 
+        information on the various debugging levels available, run the 'dvals'
+       script found in the driver source directory.
+
+       NOTE:  'debug_level' is only enabled if CONFIG_IPW2100_DEBUG is turn
+              on.
+
+----- Device Level ------
+For the device level files look in
+       
+       /sys/bus/pci/drivers/ipw2100/{PCI-ID}/
+
+For example:
+       /sys/bus/pci/drivers/ipw2100/0000:02:01.0
+
+For the device level files, see /sys/bus/pci/drivers/ipw2100:
+
+  rf_kill
+       read - 
+       0 = RF kill not enabled (radio on)
+       1 = SW based RF kill active (radio off)
+       2 = HW based RF kill active (radio off)
+       3 = Both HW and SW RF kill active (radio off)
+       write -
+       0 = If SW based RF kill active, turn the radio back on
+       1 = If radio is on, activate SW based RF kill
+
+       NOTE: If you enable the SW based RF kill and then toggle the HW
+       based RF kill from ON -> OFF -> ON, the radio will NOT come back on
+
+
+===========================
+4. Radio Kill Switch
+---------------------------
+Most laptops provide the ability for the user to physically disable the radio.
+Some vendors have implemented this as a physical switch that requires no
+software to turn the radio off and on.  On other laptops, however, the switch
+is controlled through a button being pressed and a software driver then making
+calls to turn the radio off and on.  This is referred to as a "software based
+RF kill switch"
+
+See the Sysfs helper file 'rf_kill' for determining the state of the RF switch
+on your system.
+
+
+===========================
+5. Dynamic Firmware
+---------------------------     
+As the firmware is licensed under a restricted use license, it can not be 
+included within the kernel sources.  To enable the IPW2100 you will need a 
+firmware image to load into the wireless NIC's processors.
+
+You can obtain these images from <http://ipw2100.sf.net/firmware.php>.
+
+See INSTALL for instructions on installing the firmware.
+
+
+===========================
+6. Power Management
+---------------------------     
+The IPW2100 supports the configuration of the Power Save Protocol 
+through a private wireless extension interface.  The IPW2100 supports 
+the following different modes:
+
+       off     No power management.  Radio is always on.
+       on      Automatic power management
+       1-5     Different levels of power management.  The higher the 
+               number the greater the power savings, but with an impact to 
+               packet latencies. 
+
+Power management works by powering down the radio after a certain 
+interval of time has passed where no packets are passed through the 
+radio.  Once powered down, the radio remains in that state for a given 
+period of time.  For higher power savings, the interval between last 
+packet processed to sleep is shorter and the sleep period is longer.
+
+When the radio is asleep, the access point sending data to the station 
+must buffer packets at the AP until the station wakes up and requests 
+any buffered packets.  If you have an AP that does not correctly support 
+the PSP protocol you may experience packet loss or very poor performance 
+while power management is enabled.  If this is the case, you will need 
+to try and find a firmware update for your AP, or disable power 
+management (via `iwconfig eth1 power off`)
+
+To configure the power level on the IPW2100 you use a combination of 
+iwconfig and iwpriv.  iwconfig is used to turn power management on, off, 
+and set it to auto.
+
+       iwconfig eth1 power off    Disables radio power down
+       iwconfig eth1 power on     Enables radio power management to 
+                                  last set level (defaults to AUTO)
+       iwpriv eth1 set_power 0    Sets power level to AUTO and enables 
+                                  power management if not previously 
+                                  enabled.
+       iwpriv eth1 set_power 1-5  Set the power level as specified, 
+                                  enabling power management if not 
+                                  previously enabled.
+
+You can view the current power level setting via:
+       
+       iwpriv eth1 get_power
+
+It will return the current period or timeout that is configured as a string
+in the form of xxxx/yyyy (z) where xxxx is the timeout interval (amount of
+time after packet processing), yyyy is the period to sleep (amount of time to 
+wait before powering the radio and querying the access point for buffered
+packets), and z is the 'power level'.  If power management is turned off the
+xxxx/yyyy will be replaced with 'off' -- the level reported will be the active
+level if `iwconfig eth1 power on` is invoked.
+
+
+===========================
+7. Support
+---------------------------     
+
+For general development information and support,
+go to:
+       
+    http://ipw2100.sf.net/
+
+The ipw2100 1.1.0 driver and firmware can be downloaded from:  
+
+    http://support.intel.com
+
+For installation support on the ipw2100 1.1.0 driver on Linux kernels 
+2.6.8 or greater, email support is available from:  
+
+    http://supportmail.intel.com
+
+===========================
+8. License
+---------------------------     
+
+  Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify it 
+  under the terms of the GNU General Public License (version 2) as 
+  published by the Free Software Foundation.
+  
+  This program is distributed in the hope that it will be useful, but WITHOUT 
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for 
+  more details.
+  
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59 
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+  
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+  
+  License Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
index 0aaa12c0c098ae48d48cac1535abf92e7c0880f9..7cd0aee18f55d0ec88814ea1d7ab00c7a2bd352f 100644 (file)
@@ -137,6 +137,59 @@ config PCMCIA_RAYCS
 comment "Wireless 802.11b ISA/PCI cards support"
        depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
 
+config IPW2100
+       tristate "Intel PRO/Wireless 2100 Network Connection"
+       depends on NET_RADIO && PCI && IEEE80211
+       select FW_LOADER
+       ---help---
+          A driver for the Intel PRO/Wireless 2100 Network 
+         Connection 802.11b wireless network adapter.
+
+          See <file:Documentation/networking/README.ipw2100> for information on
+          the capabilities currently enabled in this driver and for tips
+          for debugging issues and problems.
+
+         In order to use this driver, you will need a firmware image for it.
+          You can obtain the firmware from
+         <http://ipw2100.sf.net/>.  Once you have the firmware image, you 
+         will need to place it in /etc/firmware.
+
+          You will also very likely need the Wireless Tools in order to
+          configure your card:
+
+          <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+          If you want to compile the driver as a module ( = code which can be
+          inserted in and remvoed from the running kernel whenever you want),
+          say M here and read <file:Documentation/modules.txt>.  The module
+          will be called ipw2100.ko.
+       
+config IPW2100_PROMISC
+        bool "Enable promiscuous mode"
+        depends on IPW2100
+        ---help---
+         Enables promiscuous/monitor mode support for the ipw2100 driver.
+         With this feature compiled into the driver, you can switch to 
+         promiscuous mode via the Wireless Tool's Monitor mode.  While in this
+         mode, no packets can be sent.
+
+config IPW_DEBUG
+       bool "Enable full debugging output in IPW2100 module."
+       depends on IPW2100
+       ---help---
+         This option will enable debug tracing output for the IPW2100.  
+
+         This will result in the kernel module being ~60k larger.  You can 
+         control which debug output is sent to the kernel log by setting the 
+         value in 
+
+         /sys/bus/pci/drivers/ipw2100/debug_level
+
+         This entry will only exist if this option is enabled.
+
+         If you are not trying to debug or develop the IPW2100 driver, you 
+         most likely want to say N here.
+
 config AIRO
        tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
        depends on NET_RADIO && ISA && (PCI || BROKEN)
index 2b87841322cc8f7d27fac0a36bdb063d204d7420..2426885c7a5e6e8da5b5ab6ba6ee8c79834932ec 100644 (file)
@@ -2,6 +2,8 @@
 # Makefile for the Linux Wireless network device drivers.
 #
 
+obj-$(CONFIG_IPW2100) += ipw2100.o
+
 obj-$(CONFIG_STRIP) += strip.o
 obj-$(CONFIG_ARLAN) += arlan.o 
 
diff --git a/drivers/net/wireless/ipw2100.c b/drivers/net/wireless/ipw2100.c
new file mode 100644 (file)
index 0000000..d296d46
--- /dev/null
@@ -0,0 +1,8649 @@
+/******************************************************************************
+
+  Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+
+  Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+  Portions of this file are based on the sample_* files provided by Wireless
+  Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
+  <jt@hpl.hp.com>
+
+  Portions of this file are based on the Host AP project,
+  Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
+    <jkmaline@cc.hut.fi>
+  Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
+
+  Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
+  ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
+  available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
+
+******************************************************************************/
+/*
+
+ Initial driver on which this is based was developed by Janusz Gorycki,
+ Maciej Urbaniak, and Maciej Sosnowski.
+
+ Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
+
+Theory of Operation
+
+Tx - Commands and Data
+
+Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
+Each TBD contains a pointer to the physical (dma_addr_t) address of data being
+sent to the firmware as well as the length of the data.
+
+The host writes to the TBD queue at the WRITE index.  The WRITE index points
+to the _next_ packet to be written and is advanced when after the TBD has been
+filled.
+
+The firmware pulls from the TBD queue at the READ index.  The READ index points
+to the currently being read entry, and is advanced once the firmware is
+done with a packet.
+
+When data is sent to the firmware, the first TBD is used to indicate to the
+firmware if a Command or Data is being sent.  If it is Command, all of the
+command information is contained within the physical address referred to by the
+TBD.  If it is Data, the first TBD indicates the type of data packet, number
+of fragments, etc.  The next TBD then referrs to the actual packet location.
+
+The Tx flow cycle is as follows:
+
+1) ipw2100_tx() is called by kernel with SKB to transmit
+2) Packet is move from the tx_free_list and appended to the transmit pending
+   list (tx_pend_list)
+3) work is scheduled to move pending packets into the shared circular queue.
+4) when placing packet in the circular queue, the incoming SKB is DMA mapped
+   to a physical address.  That address is entered into a TBD.  Two TBDs are
+   filled out.  The first indicating a data packet, the second referring to the
+   actual payload data.
+5) the packet is removed from tx_pend_list and placed on the end of the
+   firmware pending list (fw_pend_list)
+6) firmware is notified that the WRITE index has
+7) Once the firmware has processed the TBD, INTA is triggered.
+8) For each Tx interrupt received from the firmware, the READ index is checked
+   to see which TBDs are done being processed.
+9) For each TBD that has been processed, the ISR pulls the oldest packet
+   from the fw_pend_list.
+10)The packet structure contained in the fw_pend_list is then used
+   to unmap the DMA address and to free the SKB originally passed to the driver
+   from the kernel.
+11)The packet structure is placed onto the tx_free_list
+
+The above steps are the same for commands, only the msg_free_list/msg_pend_list
+are used instead of tx_free_list/tx_pend_list
+
+...
+
+Critical Sections / Locking :
+
+There are two locks utilized.  The first is the low level lock (priv->low_lock)
+that protects the following:
+
+- Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
+
+  tx_free_list : Holds pre-allocated Tx buffers.
+    TAIL modified in __ipw2100_tx_process()
+    HEAD modified in ipw2100_tx()
+
+  tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
+    TAIL modified ipw2100_tx()
+    HEAD modified by X__ipw2100_tx_send_data()
+
+  msg_free_list : Holds pre-allocated Msg (Command) buffers
+    TAIL modified in __ipw2100_tx_process()
+    HEAD modified in ipw2100_hw_send_command()
+
+  msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
+    TAIL modified in ipw2100_hw_send_command()
+    HEAD modified in X__ipw2100_tx_send_commands()
+
+  The flow of data on the TX side is as follows:
+
+  MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
+  TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
+
+  The methods that work on the TBD ring are protected via priv->low_lock.
+
+- The internal data state of the device itself
+- Access to the firmware read/write indexes for the BD queues
+  and associated logic
+
+All external entry functions are locked with the priv->action_lock to ensure
+that only one external action is invoked at a time.
+
+
+*/
+
+#include <linux/compiler.h>
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/in6.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/kernel.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#define __KERNEL_SYSCALLS__
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/unistd.h>
+#include <linux/stringify.h>
+#include <linux/tcp.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/time.h>
+#include <linux/firmware.h>
+#include <linux/acpi.h>
+#include <linux/ctype.h>
+
+#include "ipw2100.h"
+
+#define IPW2100_VERSION "1.1.0"
+
+#define DRV_NAME       "ipw2100"
+#define DRV_VERSION    IPW2100_VERSION
+#define DRV_DESCRIPTION        "Intel(R) PRO/Wireless 2100 Network Driver"
+#define DRV_COPYRIGHT  "Copyright(c) 2003-2004 Intel Corporation"
+
+
+/* Debugging stuff */
+#ifdef CONFIG_IPW_DEBUG
+#define CONFIG_IPW2100_RX_DEBUG   /* Reception debugging */
+#endif
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+
+static int debug = 0;
+static int mode = 0;
+static int channel = 0;
+static int associate = 1;
+static int disable = 0;
+#ifdef CONFIG_PM
+static struct ipw2100_fw ipw2100_firmware;
+#endif
+
+#include <linux/moduleparam.h>
+module_param(debug, int, 0444);
+module_param(mode, int, 0444);
+module_param(channel, int, 0444);
+module_param(associate, int, 0444);
+module_param(disable, int, 0444);
+
+MODULE_PARM_DESC(debug, "debug level");
+MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
+MODULE_PARM_DESC(channel, "channel");
+MODULE_PARM_DESC(associate, "auto associate when scanning (default on)");
+MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
+
+u32 ipw2100_debug_level = IPW_DL_NONE;
+
+#ifdef CONFIG_IPW_DEBUG
+static const char *command_types[] = {
+       "undefined",
+       "unused", /* HOST_ATTENTION */
+       "HOST_COMPLETE",
+       "unused", /* SLEEP */
+       "unused", /* HOST_POWER_DOWN */
+       "unused",
+       "SYSTEM_CONFIG",
+       "unused", /* SET_IMR */
+       "SSID",
+       "MANDATORY_BSSID",
+       "AUTHENTICATION_TYPE",
+       "ADAPTER_ADDRESS",
+       "PORT_TYPE",
+       "INTERNATIONAL_MODE",
+       "CHANNEL",
+       "RTS_THRESHOLD",
+       "FRAG_THRESHOLD",
+       "POWER_MODE",
+       "TX_RATES",
+       "BASIC_TX_RATES",
+       "WEP_KEY_INFO",
+       "unused",
+       "unused",
+       "unused",
+       "unused",
+       "WEP_KEY_INDEX",
+       "WEP_FLAGS",
+       "ADD_MULTICAST",
+       "CLEAR_ALL_MULTICAST",
+       "BEACON_INTERVAL",
+       "ATIM_WINDOW",
+       "CLEAR_STATISTICS",
+       "undefined",
+       "undefined",
+       "undefined",
+       "undefined",
+       "TX_POWER_INDEX",
+       "undefined",
+       "undefined",
+       "undefined",
+       "undefined",
+       "undefined",
+       "undefined",
+       "BROADCAST_SCAN",
+       "CARD_DISABLE",
+       "PREFERRED_BSSID",
+       "SET_SCAN_OPTIONS",
+       "SCAN_DWELL_TIME",
+       "SWEEP_TABLE",
+       "AP_OR_STATION_TABLE",
+       "GROUP_ORDINALS",
+       "SHORT_RETRY_LIMIT",
+       "LONG_RETRY_LIMIT",
+       "unused", /* SAVE_CALIBRATION */
+       "unused", /* RESTORE_CALIBRATION */
+       "undefined",
+       "undefined",
+       "undefined",
+       "HOST_PRE_POWER_DOWN",
+       "unused", /* HOST_INTERRUPT_COALESCING */
+       "undefined",
+       "CARD_DISABLE_PHY_OFF",
+       "MSDU_TX_RATES"
+       "undefined",
+       "undefined",
+       "SET_STATION_STAT_BITS",
+       "CLEAR_STATIONS_STAT_BITS",
+       "LEAP_ROGUE_MODE",
+       "SET_SECURITY_INFORMATION",
+       "DISASSOCIATION_BSSID",
+       "SET_WPA_ASS_IE"
+};
+#endif
+
+
+/* Pre-decl until we get the code solid and then we can clean it up */
+static void X__ipw2100_tx_send_commands(struct ipw2100_priv *priv);
+static void X__ipw2100_tx_send_data(struct ipw2100_priv *priv);
+static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
+
+static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
+static void ipw2100_queues_free(struct ipw2100_priv *priv);
+static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
+
+
+static inline void read_register(struct net_device *dev, u32 reg, u32 *val)
+{
+       *val = readl((void *)(dev->base_addr + reg));
+       IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
+}
+
+static inline void write_register(struct net_device *dev, u32 reg, u32 val)
+{
+       writel(val, (void *)(dev->base_addr + reg));
+       IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
+}
+
+static inline void read_register_word(struct net_device *dev, u32 reg, u16 *val)
+{
+       *val = readw((void *)(dev->base_addr + reg));
+       IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
+}
+
+static inline void read_register_byte(struct net_device *dev, u32 reg, u8 *val)
+{
+       *val = readb((void *)(dev->base_addr + reg));
+       IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
+}
+
+static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
+{
+       writew(val, (void *)(dev->base_addr + reg));
+       IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
+}
+
+
+static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
+{
+       writeb(val, (void *)(dev->base_addr + reg));
+       IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
+}
+
+static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 *val)
+{
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                      addr & IPW_REG_INDIRECT_ADDR_MASK);
+       read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
+{
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                      addr & IPW_REG_INDIRECT_ADDR_MASK);
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void read_nic_word(struct net_device *dev, u32 addr, u16 *val)
+{
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                      addr & IPW_REG_INDIRECT_ADDR_MASK);
+       read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
+{
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                      addr & IPW_REG_INDIRECT_ADDR_MASK);
+       write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 *val)
+{
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                      addr & IPW_REG_INDIRECT_ADDR_MASK);
+       read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
+{
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                      addr & IPW_REG_INDIRECT_ADDR_MASK);
+       write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
+}
+
+static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
+{
+       write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+                      addr & IPW_REG_INDIRECT_ADDR_MASK);
+}
+
+static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
+{
+       write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
+}
+
+static inline void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
+                                   const u8 *buf)
+{
+       u32 aligned_addr;
+       u32 aligned_len;
+       u32 dif_len;
+       u32 i;
+
+       /* read first nibble byte by byte */
+       aligned_addr = addr & (~0x3);
+       dif_len = addr - aligned_addr;
+       if (dif_len) {
+               /* Start reading at aligned_addr + dif_len */
+               write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                              aligned_addr);
+               for (i = dif_len; i < 4; i++, buf++)
+                       write_register_byte(
+                               dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
+                               *buf);
+
+               len -= dif_len;
+               aligned_addr += 4;
+       }
+
+       /* read DWs through autoincrement registers */
+       write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+                      aligned_addr);
+       aligned_len = len & (~0x3);
+       for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
+               write_register(
+                       dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *)buf);
+
+       /* copy the last nibble */
+       dif_len = len - aligned_len;
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
+       for (i = 0; i < dif_len; i++, buf++)
+               write_register_byte(
+                       dev, IPW_REG_INDIRECT_ACCESS_DATA + i, *buf);
+}
+
+static inline void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
+                                  u8 *buf)
+{
+       u32 aligned_addr;
+       u32 aligned_len;
+       u32 dif_len;
+       u32 i;
+
+       /* read first nibble byte by byte */
+       aligned_addr = addr & (~0x3);
+       dif_len = addr - aligned_addr;
+       if (dif_len) {
+               /* Start reading at aligned_addr + dif_len */
+               write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                              aligned_addr);
+               for (i = dif_len; i < 4; i++, buf++)
+                       read_register_byte(
+                               dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
+
+               len -= dif_len;
+               aligned_addr += 4;
+       }
+
+       /* read DWs through autoincrement registers */
+       write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
+                      aligned_addr);
+       aligned_len = len & (~0x3);
+       for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
+               read_register(dev, IPW_REG_AUTOINCREMENT_DATA,
+                             (u32 *)buf);
+
+       /* copy the last nibble */
+       dif_len = len - aligned_len;
+       write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
+                      aligned_addr);
+       for (i = 0; i < dif_len; i++, buf++)
+               read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA +
+                                  i, buf);
+}
+
+static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
+{
+       return (dev->base_addr &&
+               (readl((void *)(dev->base_addr + IPW_REG_DOA_DEBUG_AREA_START))
+                == IPW_DATA_DOA_DEBUG_VALUE));
+}
+
+int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
+                       void *val, u32 *len)
+{
+       struct ipw2100_ordinals *ordinals = &priv->ordinals;
+       u32 addr;
+       u32 field_info;
+       u16 field_len;
+       u16 field_count;
+       u32 total_length;
+
+       if (ordinals->table1_addr == 0) {
+               IPW_DEBUG_WARNING(DRV_NAME ": attempt to use fw ordinals "
+                      "before they have been loaded.\n");
+               return -EINVAL;
+       }
+
+       if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
+               if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
+                       *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+                       IPW_DEBUG_WARNING(DRV_NAME
+                              ": ordinal buffer length too small, need %d\n",
+                              IPW_ORD_TAB_1_ENTRY_SIZE);
+
+                       return -EINVAL;
+               }
+
+               read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2),
+                              &addr);
+               read_nic_dword(priv->net_dev, addr, val);
+
+               *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+               return 0;
+       }
+
+       if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
+
+               ord -= IPW_START_ORD_TAB_2;
+
+               /* get the address of statistic */
+               read_nic_dword(priv->net_dev, ordinals->table2_addr + (ord << 3),
+                              &addr);
+
+               /* get the second DW of statistics ;
+                * two 16-bit words - first is length, second is count */
+               read_nic_dword(priv->net_dev,
+                              ordinals->table2_addr + (ord << 3) + sizeof(u32),
+                              &field_info);
+
+               /* get each entry length */
+               field_len = *((u16 *)&field_info);
+
+               /* get number of entries */
+               field_count = *(((u16 *)&field_info) + 1);
+
+               /* abort if no enought memory */
+               total_length = field_len * field_count;
+               if (total_length > *len) {
+                       *len = total_length;
+                       return -EINVAL;
+               }
+
+               *len = total_length;
+               if (!total_length)
+                       return 0;
+
+               /* read the ordinal data from the SRAM */
+               read_nic_memory(priv->net_dev, addr, total_length, val);
+
+               return 0;
+       }
+
+       IPW_DEBUG_WARNING(DRV_NAME ": ordinal %d neither in table 1 nor "
+              "in table 2\n", ord);
+
+       return -EINVAL;
+}
+
+static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 *val,
+                              u32 *len)
+{
+       struct ipw2100_ordinals *ordinals = &priv->ordinals;
+       u32 addr;
+
+       if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
+               if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
+                       *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+                       IPW_DEBUG_INFO("wrong size\n");
+                       return -EINVAL;
+               }
+
+               read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2),
+                              &addr);
+
+               write_nic_dword(priv->net_dev, addr, *val);
+
+               *len = IPW_ORD_TAB_1_ENTRY_SIZE;
+
+               return 0;
+       }
+
+       IPW_DEBUG_INFO("wrong table\n");
+       if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
+               return -EINVAL;
+
+       return -EINVAL;
+}
+
+static char *snprint_line(char *buf, size_t count,
+                         const u8 *data, u32 len, u32 ofs)
+{
+       int out, i, j, l;
+       char c;
+
+       out = snprintf(buf, count, "%08X", ofs);
+
+       for (l = 0, i = 0; i < 2; i++) {
+               out += snprintf(buf + out, count - out, " ");
+               for (j = 0; j < 8 && l < len; j++, l++)
+                       out += snprintf(buf + out, count - out, "%02X ",
+                                       data[(i * 8 + j)]);
+               for (; j < 8; j++)
+                       out += snprintf(buf + out, count - out, "   ");
+       }
+
+       out += snprintf(buf + out, count - out, " ");
+       for (l = 0, i = 0; i < 2; i++) {
+               out += snprintf(buf + out, count - out, " ");
+               for (j = 0; j < 8 && l < len; j++, l++) {
+                       c = data[(i * 8 + j)];
+                       if (!isascii(c) || !isprint(c))
+                               c = '.';
+
+                       out += snprintf(buf + out, count - out, "%c", c);
+               }
+
+               for (; j < 8; j++)
+                       out += snprintf(buf + out, count - out, " ");
+       }
+
+       return buf;
+}
+
+static void printk_buf(int level, const u8 *data, u32 len)
+{
+       char line[81];
+       u32 ofs = 0;
+       if (!(ipw2100_debug_level & level))
+               return;
+
+       while (len) {
+               printk(KERN_DEBUG "%s\n",
+                      snprint_line(line, sizeof(line), &data[ofs],
+                                   min(len, 16U), ofs));
+               ofs += 16;
+               len -= min(len, 16U);
+       }
+}
+
+
+
+#define MAX_RESET_BACKOFF 10
+
+static inline void schedule_reset(struct ipw2100_priv *priv)
+{
+       unsigned long now = get_seconds();
+
+       /* If we haven't received a reset request within the backoff period,
+        * then we can reset the backoff interval so this reset occurs
+        * immediately */
+       if (priv->reset_backoff &&
+           (now - priv->last_reset > priv->reset_backoff))
+               priv->reset_backoff = 0;
+
+       priv->last_reset = get_seconds();
+
+       if (!(priv->status & STATUS_RESET_PENDING)) {
+               IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
+                              priv->net_dev->name, priv->reset_backoff);
+               netif_carrier_off(priv->net_dev);
+               netif_stop_queue(priv->net_dev);
+               priv->status |= STATUS_RESET_PENDING;
+               if (priv->reset_backoff)
+                       queue_delayed_work(priv->workqueue, &priv->reset_work,
+                                          priv->reset_backoff * HZ);
+               else
+                       queue_work(priv->workqueue, &priv->reset_work);
+
+               if (priv->reset_backoff < MAX_RESET_BACKOFF)
+                       priv->reset_backoff++;
+
+               wake_up_interruptible(&priv->wait_command_queue);
+       } else
+               IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
+                              priv->net_dev->name);
+
+}
+
+#define HOST_COMPLETE_TIMEOUT (2 * HZ)
+static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
+                                  struct host_command * cmd)
+{
+       struct list_head *element;
+       struct ipw2100_tx_packet *packet;
+       unsigned long flags;
+       int err = 0;
+
+       IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
+                    command_types[cmd->host_command], cmd->host_command,
+                    cmd->host_command_length);
+       printk_buf(IPW_DL_HC, (u8*)cmd->host_command_parameters,
+                  cmd->host_command_length);
+
+       spin_lock_irqsave(&priv->low_lock, flags);
+
+       if (priv->fatal_error) {
+               IPW_DEBUG_INFO("Attempt to send command while hardware in fatal error condition.\n");
+               err = -EIO;
+               goto fail_unlock;
+       }
+
+       if (!(priv->status & STATUS_RUNNING)) {
+               IPW_DEBUG_INFO("Attempt to send command while hardware is not running.\n");
+               err = -EIO;
+               goto fail_unlock;
+       }
+
+       if (priv->status & STATUS_CMD_ACTIVE) {
+               IPW_DEBUG_INFO("Attempt to send command while another command is pending.\n");
+               err = -EBUSY;
+               goto fail_unlock;
+       }
+
+       if (list_empty(&priv->msg_free_list)) {
+               IPW_DEBUG_INFO("no available msg buffers\n");
+               goto fail_unlock;
+       }
+
+       priv->status |= STATUS_CMD_ACTIVE;
+       priv->messages_sent++;
+
+       element = priv->msg_free_list.next;
+
+       packet = list_entry(element, struct ipw2100_tx_packet, list);
+       packet->jiffy_start = jiffies;
+
+       /* initialize the firmware command packet */
+       packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
+       packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
+       packet->info.c_struct.cmd->host_command_len_reg = cmd->host_command_length;
+       packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
+
+       memcpy(packet->info.c_struct.cmd->host_command_params_reg,
+              cmd->host_command_parameters,
+              sizeof(packet->info.c_struct.cmd->host_command_params_reg));
+
+       list_del(element);
+       DEC_STAT(&priv->msg_free_stat);
+
+       list_add_tail(element, &priv->msg_pend_list);
+       INC_STAT(&priv->msg_pend_stat);
+
+       X__ipw2100_tx_send_commands(priv);
+       X__ipw2100_tx_send_data(priv);
+
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+       /*
+        * We must wait for this command to complete before another
+        * command can be sent...  but if we wait more than 3 seconds
+        * then there is a problem.
+        */
+
+       err = wait_event_interruptible_timeout(
+               priv->wait_command_queue, !(priv->status & STATUS_CMD_ACTIVE),
+               HOST_COMPLETE_TIMEOUT);
+
+       if (err == 0) {
+               IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
+                              HOST_COMPLETE_TIMEOUT / (HZ / 100));
+               priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
+               priv->status &= ~STATUS_CMD_ACTIVE;
+               schedule_reset(priv);
+               return -EIO;
+       }
+
+       if (priv->fatal_error) {
+               IPW_DEBUG_WARNING("%s: firmware fatal error\n",
+                      priv->net_dev->name);
+               return -EIO;
+       }
+
+       /* !!!!! HACK TEST !!!!!
+        * When lots of debug trace statements are enabled, the driver
+        * doesn't seem to have as many firmware restart cycles...
+        *
+        * As a test, we're sticking in a 1/100s delay here */
+       set_current_state(TASK_UNINTERRUPTIBLE);
+       schedule_timeout(HZ / 100);
+
+       return 0;
+
+ fail_unlock:
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+       return err;
+}
+
+
+/*
+ * Verify the values and data access of the hardware
+ * No locks needed or used.  No functions called.
+ */
+static int ipw2100_verify(struct ipw2100_priv *priv)
+{
+       u32 data1, data2;
+       u32 address;
+
+       u32 val1 = 0x76543210;
+       u32 val2 = 0xFEDCBA98;
+
+       /* Domain 0 check - all values should be DOA_DEBUG */
+       for (address = IPW_REG_DOA_DEBUG_AREA_START;
+            address < IPW_REG_DOA_DEBUG_AREA_END;
+            address += sizeof(u32)) {
+               read_register(priv->net_dev, address, &data1);
+               if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
+                       return -EIO;
+       }
+
+       /* Domain 1 check - use arbitrary read/write compare  */
+       for (address = 0; address < 5; address++) {
+               /* The memory area is not used now */
+               write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
+                              val1);
+               write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
+                              val2);
+               read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
+                             &data1);
+               read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
+                             &data2);
+               if (val1 == data1 && val2 == data2)
+                       return 0;
+       }
+
+       return -EIO;
+}
+
+/*
+ *
+ * Loop until the CARD_DISABLED bit is the same value as the
+ * supplied parameter
+ *
+ * TODO: See if it would be more efficient to do a wait/wake
+ *       cycle and have the completion event trigger the wakeup
+ *
+ */
+#define IPW_CARD_DISABLE_COMPLETE_WAIT             100 // 100 milli
+static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
+{
+       int i;
+       u32 card_state;
+       u32 len = sizeof(card_state);
+       int err;
+
+       for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
+               err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
+                                         &card_state, &len);
+               if (err) {
+                       IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
+                                      "failed.\n");
+                       return 0;
+               }
+
+               /* We'll break out if either the HW state says it is
+                * in the state we want, or if HOST_COMPLETE command
+                * finishes */
+               if ((card_state == state) ||
+                   ((priv->status & STATUS_ENABLED) ?
+                    IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
+                       if (state == IPW_HW_STATE_ENABLED)
+                               priv->status |= STATUS_ENABLED;
+                       else
+                               priv->status &= ~STATUS_ENABLED;
+
+                       return 0;
+               }
+
+               udelay(50);
+       }
+
+       IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
+                      state ? "DISABLED" : "ENABLED");
+       return -EIO;
+}
+
+
+/*********************************************************************
+    Procedure   :   sw_reset_and_clock
+    Purpose     :   Asserts s/w reset, asserts clock initialization
+                    and waits for clock stabilization
+ ********************************************************************/
+static int sw_reset_and_clock(struct ipw2100_priv *priv)
+{
+       int i;
+       u32 r;
+
+       // assert s/w reset
+       write_register(priv->net_dev, IPW_REG_RESET_REG,
+                      IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+       // wait for clock stabilization
+       for (i = 0; i < 1000; i++) {
+               udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
+
+               // check clock ready bit
+               read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
+               if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
+                       break;
+       }
+
+       if (i == 1000)
+               return -EIO;    // TODO: better error value
+
+       /* set "initialization complete" bit to move adapter to
+        * D0 state */
+       write_register(priv->net_dev, IPW_REG_GP_CNTRL,
+                      IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
+
+       /* wait for clock stabilization */
+       for (i = 0; i < 10000; i++) {
+               udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
+
+               /* check clock ready bit */
+               read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
+               if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
+                       break;
+       }
+
+       if (i == 10000)
+               return -EIO;    /* TODO: better error value */
+
+//#if CONFIG_IPW2100_D0ENABLED
+       /* set D0 standby bit */
+       read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
+       write_register(priv->net_dev, IPW_REG_GP_CNTRL,
+                      r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
+//#endif
+
+       return 0;
+}
+
+/*********************************************************************
+    Procedure   :   ipw2100_ipw2100_download_firmware
+    Purpose     :   Initiaze adapter after power on.
+                    The sequence is:
+                    1. assert s/w reset first!
+                    2. awake clocks & wait for clock stabilization
+                    3. hold ARC (don't ask me why...)
+                    4. load Dino ucode and reset/clock init again
+                    5. zero-out shared mem
+                    6. download f/w
+ *******************************************************************/
+static int ipw2100_download_firmware(struct ipw2100_priv *priv)
+{
+       u32 address;
+       int err;
+
+#ifndef CONFIG_PM
+       /* Fetch the firmware and microcode */
+       struct ipw2100_fw ipw2100_firmware;
+#endif
+
+       if (priv->fatal_error) {
+               IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
+                      "fatal error %d.  Interface must be brought down.\n",
+                      priv->net_dev->name, priv->fatal_error);
+               return -EINVAL;
+       }
+
+#ifdef CONFIG_PM
+       if (!ipw2100_firmware.version) {
+               err = ipw2100_get_firmware(priv, &ipw2100_firmware);
+               if (err) {
+                       IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
+                              priv->net_dev->name, err);
+                       priv->fatal_error = IPW2100_ERR_FW_LOAD;
+                       goto fail;
+               }
+       }
+#else
+       err = ipw2100_get_firmware(priv, &ipw2100_firmware);
+       if (err) {
+               IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
+                      priv->net_dev->name, err);
+               priv->fatal_error = IPW2100_ERR_FW_LOAD;
+               goto fail;
+       }
+#endif
+       priv->firmware_version = ipw2100_firmware.version;
+
+       /* s/w reset and clock stabilization */
+       err = sw_reset_and_clock(priv);
+       if (err) {
+               IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
+                      priv->net_dev->name, err);
+               goto fail;
+       }
+
+       err = ipw2100_verify(priv);
+       if (err) {
+               IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
+                      priv->net_dev->name, err);
+               goto fail;
+       }
+
+       /* Hold ARC */
+       write_nic_dword(priv->net_dev,
+                       IPW_INTERNAL_REGISTER_HALT_AND_RESET,
+                       0x80000000);
+
+       /* allow ARC to run */
+       write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
+
+       /* load microcode */
+       err = ipw2100_ucode_download(priv, &ipw2100_firmware);
+       if (err) {
+               IPW_DEBUG_ERROR("%s: Error loading microcode: %d\n",
+                      priv->net_dev->name, err);
+               goto fail;
+       }
+
+       /* release ARC */
+       write_nic_dword(priv->net_dev,
+                       IPW_INTERNAL_REGISTER_HALT_AND_RESET,
+                       0x00000000);
+
+       /* s/w reset and clock stabilization (again!!!) */
+       err = sw_reset_and_clock(priv);
+       if (err) {
+               IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
+                      priv->net_dev->name, err);
+               goto fail;
+       }
+
+       /* load f/w */
+       err = ipw2100_fw_download(priv, &ipw2100_firmware);
+       if (err) {
+               IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
+                      priv->net_dev->name, err);
+               goto fail;
+       }
+
+#ifndef CONFIG_PM
+       /*
+        * When the .resume method of the driver is called, the other
+        * part of the system, i.e. the ide driver could still stay in
+        * the suspend stage. This prevents us from loading the firmware
+        * from the disk.  --YZ
+        */
+
+       /* free any storage allocated for firmware image */
+       ipw2100_release_firmware(priv, &ipw2100_firmware);
+#endif
+
+       /* zero out Domain 1 area indirectly (Si requirement) */
+       for (address = IPW_HOST_FW_SHARED_AREA0;
+            address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
+               write_nic_dword(priv->net_dev, address, 0);
+       for (address = IPW_HOST_FW_SHARED_AREA1;
+            address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
+               write_nic_dword(priv->net_dev, address, 0);
+       for (address = IPW_HOST_FW_SHARED_AREA2;
+            address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
+               write_nic_dword(priv->net_dev, address, 0);
+       for (address = IPW_HOST_FW_SHARED_AREA3;
+            address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
+               write_nic_dword(priv->net_dev, address, 0);
+       for (address = IPW_HOST_FW_INTERRUPT_AREA;
+            address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
+               write_nic_dword(priv->net_dev, address, 0);
+
+       return 0;
+
+ fail:
+       ipw2100_release_firmware(priv, &ipw2100_firmware);
+       return err;
+}
+
+static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
+{
+       if (priv->status & STATUS_INT_ENABLED)
+               return;
+       priv->status |= STATUS_INT_ENABLED;
+       write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
+}
+
+static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
+{
+       if (!(priv->status & STATUS_INT_ENABLED))
+               return;
+       priv->status &= ~STATUS_INT_ENABLED;
+       write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
+}
+
+
+static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
+{
+       struct ipw2100_ordinals *ord = &priv->ordinals;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
+                     &ord->table1_addr);
+
+       read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
+                     &ord->table2_addr);
+
+       read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
+       read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
+
+       ord->table2_size &= 0x0000FFFF;
+
+       IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
+       IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
+       IPW_DEBUG_INFO("exit\n");
+}
+
+static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
+{
+       u32 reg = 0;
+       /*
+        * Set GPIO 3 writable by FW; GPIO 1 writable
+        * by driver and enable clock
+        */
+       reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
+              IPW_BIT_GPIO_LED_OFF);
+       write_register(priv->net_dev, IPW_REG_GPIO, reg);
+}
+
+static inline int rf_kill_active(struct ipw2100_priv *priv)
+{
+#define MAX_RF_KILL_CHECKS 5
+#define RF_KILL_CHECK_DELAY 40
+#define RF_KILL_CHECK_THRESHOLD 3
+
+       unsigned short value = 0;
+       u32 reg = 0;
+       int i;
+
+       if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
+               priv->status &= ~STATUS_RF_KILL_HW;
+               return 0;
+       }
+
+       for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
+               udelay(RF_KILL_CHECK_DELAY);
+               read_register(priv->net_dev, IPW_REG_GPIO, &reg);
+               value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
+       }
+
+       if (value == 0)
+               priv->status |= STATUS_RF_KILL_HW;
+       else
+               priv->status &= ~STATUS_RF_KILL_HW;
+
+       return (value == 0);
+}
+
+static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
+{
+       u32 addr, len;
+       u32 val;
+
+       /*
+        * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
+        */
+       len = sizeof(addr);
+       if (ipw2100_get_ordinal(
+                   priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
+                   &addr, &len)) {
+               IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+                      __LINE__);
+               return -EIO;
+       }
+
+       IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
+
+       /*
+        * EEPROM version is the byte at offset 0xfd in firmware
+        * We read 4 bytes, then shift out the byte we actually want */
+       read_nic_dword(priv->net_dev, addr + 0xFC, &val);
+       priv->eeprom_version = (val >> 24) & 0xFF;
+       IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
+
+        /*
+        *  HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
+        *
+        *  notice that the EEPROM bit is reverse polarity, i.e.
+        *     bit = 0  signifies HW RF kill switch is supported
+        *     bit = 1  signifies HW RF kill switch is NOT supported
+        */
+       read_nic_dword(priv->net_dev, addr + 0x20, &val);
+       if (!((val >> 24) & 0x01))
+               priv->hw_features |= HW_FEATURE_RFKILL;
+
+       IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
+                          (priv->hw_features & HW_FEATURE_RFKILL) ?
+                          "" : "not ");
+
+       return 0;
+}
+
+/*
+ * Start firmware execution after power on and intialization
+ * The sequence is:
+ *  1. Release ARC
+ *  2. Wait for f/w initialization completes;
+ */
+static int ipw2100_start_adapter(struct ipw2100_priv *priv)
+{
+#define IPW_WAIT_FW_INIT_COMPLETE_DELAY (40 * HZ / 1000)
+       int i;
+       u32 inta, inta_mask, gpio;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       if (priv->status & STATUS_RUNNING)
+               return 0;
+
+       /*
+        * Initialize the hw - drive adapter to DO state by setting
+        * init_done bit. Wait for clk_ready bit and Download
+        * fw & dino ucode
+        */
+       if (ipw2100_download_firmware(priv)) {
+               IPW_DEBUG_ERROR("%s: Failed to power on the adapter.\n",
+                      priv->net_dev->name);
+               return -EIO;
+       }
+
+       /* Clear the Tx, Rx and Msg queues and the r/w indexes
+        * in the firmware RBD and TBD ring queue */
+       ipw2100_queues_initialize(priv);
+
+       ipw2100_hw_set_gpio(priv);
+
+       /* TODO -- Look at disabling interrupts here to make sure none
+        * get fired during FW initialization */
+
+       /* Release ARC - clear reset bit */
+       write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
+
+       /* wait for f/w intialization complete */
+       IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
+       i = 5000;
+       do {
+               set_current_state(TASK_UNINTERRUPTIBLE);
+               schedule_timeout(IPW_WAIT_FW_INIT_COMPLETE_DELAY);
+               /* Todo... wait for sync command ... */
+
+               read_register(priv->net_dev, IPW_REG_INTA, &inta);
+
+               /* check "init done" bit */
+               if (inta & IPW2100_INTA_FW_INIT_DONE) {
+                       /* reset "init done" bit */
+                       write_register(priv->net_dev, IPW_REG_INTA,
+                                      IPW2100_INTA_FW_INIT_DONE);
+                       break;
+               }
+
+               /* check error conditions : we check these after the firmware
+                * check so that if there is an error, the interrupt handler
+                * will see it and the adapter will be reset */
+               if (inta &
+                   (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
+                       /* clear error conditions */
+                       write_register(priv->net_dev, IPW_REG_INTA,
+                                      IPW2100_INTA_FATAL_ERROR |
+                                      IPW2100_INTA_PARITY_ERROR);
+               }
+       } while (i--);
+
+       /* Clear out any pending INTAs since we aren't supposed to have
+        * interrupts enabled at this point... */
+       read_register(priv->net_dev, IPW_REG_INTA, &inta);
+       read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
+       inta &= IPW_INTERRUPT_MASK;
+       /* Clear out any pending interrupts */
+       if (inta & inta_mask)
+               write_register(priv->net_dev, IPW_REG_INTA, inta);
+
+       IPW_DEBUG_FW("f/w initialization complete: %s\n",
+                    i ? "SUCCESS" : "FAILED");
+
+       if (!i) {
+               IPW_DEBUG_WARNING("%s: Firmware did not initialize.\n",
+                      priv->net_dev->name);
+               return -EIO;
+       }
+
+       /* allow firmware to write to GPIO1 & GPIO3 */
+       read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
+
+       gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
+
+       write_register(priv->net_dev, IPW_REG_GPIO, gpio);
+
+       /* Ready to receive commands */
+       priv->status |= STATUS_RUNNING;
+
+       /* The adapter has been reset; we are not associated */
+       priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
+
+       IPW_DEBUG_INFO("exit\n");
+
+       return 0;
+}
+
+static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
+{
+       if (!priv->fatal_error)
+               return;
+
+       priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
+       priv->fatal_index %= IPW2100_ERROR_QUEUE;
+       priv->fatal_error = 0;
+}
+
+
+/* NOTE: Our interrupt is disabled when this method is called */
+static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
+{
+       u32 reg;
+       int i;
+
+       IPW_DEBUG_INFO("Power cycling the hardware.\n");
+
+       ipw2100_hw_set_gpio(priv);
+
+       /* Step 1. Stop Master Assert */
+       write_register(priv->net_dev, IPW_REG_RESET_REG,
+                      IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+
+       /* Step 2. Wait for stop Master Assert
+        *         (not more then 50us, otherwise ret error */
+       i = 5;
+       do {
+               udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
+               read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
+
+               if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+                       break;
+       }  while(i--);
+
+       priv->status &= ~STATUS_RESET_PENDING;
+
+       if (!i) {
+               IPW_DEBUG_INFO("exit - waited too long for master assert stop\n");
+               return -EIO;
+       }
+
+       write_register(priv->net_dev, IPW_REG_RESET_REG,
+                      IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+
+       /* Reset any fatal_error conditions */
+       ipw2100_reset_fatalerror(priv);
+
+       /* At this point, the adapter is now stopped and disabled */
+       priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
+                         STATUS_ASSOCIATED | STATUS_ENABLED);
+
+       return 0;
+}
+
+/*
+ * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
+ *
+ * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
+ *
+ * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
+ * if STATUS_ASSN_LOST is sent.
+ */
+static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
+{
+
+#define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
+
+       struct host_command cmd = {
+               .host_command = CARD_DISABLE_PHY_OFF,
+               .host_command_sequence = 0,
+               .host_command_length = 0,
+       };
+       int err, i;
+       u32 val1, val2;
+
+       IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
+
+       /* Turn off the radio */
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err)
+               return err;
+
+       for (i = 0; i < 2500; i++) {
+               read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
+               read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
+
+               if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
+                   (val2 & IPW2100_COMMAND_PHY_OFF))
+                       return 0;
+
+               set_current_state(TASK_UNINTERRUPTIBLE);
+               schedule_timeout(HW_PHY_OFF_LOOP_DELAY);
+       }
+
+       return -EIO;
+}
+
+
+static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
+{
+       struct host_command cmd = {
+               .host_command = HOST_COMPLETE,
+               .host_command_sequence = 0,
+               .host_command_length = 0
+       };
+       int err = 0;
+
+       IPW_DEBUG_HC("HOST_COMPLETE\n");
+
+       if (priv->status & STATUS_ENABLED)
+               return 0;
+
+       down(&priv->adapter_sem);
+
+       if (rf_kill_active(priv)) {
+               IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
+               goto fail_up;
+       }
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err) {
+               IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
+               goto fail_up;
+       }
+
+       err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
+       if (err) {
+               IPW_DEBUG_INFO(
+                      "%s: card not responding to init command.\n",
+                      priv->net_dev->name);
+               goto fail_up;
+       }
+
+       if (priv->stop_hang_check) {
+               priv->stop_hang_check = 0;
+               queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
+       }
+
+fail_up:
+       up(&priv->adapter_sem);
+       return err;
+}
+
+static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
+{
+#define HW_POWER_DOWN_DELAY (HZ / 10)
+
+       struct host_command cmd = {
+               .host_command = HOST_PRE_POWER_DOWN,
+               .host_command_sequence = 0,
+               .host_command_length = 0,
+       };
+       int err, i;
+       u32 reg;
+
+       if (!(priv->status & STATUS_RUNNING))
+               return 0;
+
+       priv->status |= STATUS_STOPPING;
+
+       /* We can only shut down the card if the firmware is operational.  So,
+        * if we haven't reset since a fatal_error, then we can not send the
+        * shutdown commands. */
+       if (!priv->fatal_error) {
+               /* First, make sure the adapter is enabled so that the PHY_OFF
+                * command can shut it down */
+               ipw2100_enable_adapter(priv);
+
+               err = ipw2100_hw_phy_off(priv);
+               if (err)
+                       IPW_DEBUG_WARNING("Error disabling radio %d\n", err);
+
+               /*
+                * If in D0-standby mode going directly to D3 may cause a
+                * PCI bus violation.  Therefore we must change out of the D0
+                * state.
+                *
+                * Sending the PREPARE_FOR_POWER_DOWN will restrict the
+                * hardware from going into standby mode and will transition
+                * out of D0-standy if it is already in that state.
+                *
+                * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
+                * driver upon completion.  Once received, the driver can
+                * proceed to the D3 state.
+                *
+                * Prepare for power down command to fw.  This command would
+                * take HW out of D0-standby and prepare it for D3 state.
+                *
+                * Currently FW does not support event notification for this
+                * event. Therefore, skip waiting for it.  Just wait a fixed
+                * 100ms
+                */
+               IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
+
+               err = ipw2100_hw_send_command(priv, &cmd);
+               if (err)
+                       IPW_DEBUG_WARNING(
+                              "%s: Power down command failed: Error %d\n",
+                              priv->net_dev->name, err);
+               else {
+                       set_current_state(TASK_UNINTERRUPTIBLE);
+                       schedule_timeout(HW_POWER_DOWN_DELAY);
+               }
+       }
+
+       priv->status &= ~STATUS_ENABLED;
+
+       /*
+        * Set GPIO 3 writable by FW; GPIO 1 writable
+        * by driver and enable clock
+        */
+       ipw2100_hw_set_gpio(priv);
+
+       /*
+        * Power down adapter.  Sequence:
+        * 1. Stop master assert (RESET_REG[9]=1)
+        * 2. Wait for stop master (RESET_REG[8]==1)
+        * 3. S/w reset assert (RESET_REG[7] = 1)
+        */
+
+       /* Stop master assert */
+       write_register(priv->net_dev, IPW_REG_RESET_REG,
+                      IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+
+       /* wait stop master not more than 50 usec.
+        * Otherwise return error. */
+       for (i = 5; i > 0; i--) {
+               udelay(10);
+
+               /* Check master stop bit */
+               read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
+
+               if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+                       break;
+       }
+
+       if (i == 0)
+               IPW_DEBUG_WARNING(DRV_NAME
+                      ": %s: Could now power down adapter.\n",
+                      priv->net_dev->name);
+
+       /* assert s/w reset */
+       write_register(priv->net_dev, IPW_REG_RESET_REG,
+                      IPW_AUX_HOST_RESET_REG_SW_RESET);
+
+       priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
+
+       return 0;
+}
+
+
+static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
+{
+       struct host_command cmd = {
+               .host_command = CARD_DISABLE,
+               .host_command_sequence = 0,
+               .host_command_length = 0
+       };
+       int err = 0;
+
+       IPW_DEBUG_HC("CARD_DISABLE\n");
+
+       if (!(priv->status & STATUS_ENABLED))
+               return 0;
+
+       /* Make sure we clear the associated state */
+       priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+
+       if (!priv->stop_hang_check) {
+               priv->stop_hang_check = 1;
+               cancel_delayed_work(&priv->hang_check);
+       }
+
+       down(&priv->adapter_sem);
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err) {
+               IPW_DEBUG_WARNING("exit - failed to send CARD_DISABLE command\n");
+               goto fail_up;
+       }
+
+       err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
+       if (err) {
+               IPW_DEBUG_WARNING("exit - card failed to change to DISABLED\n");
+               goto fail_up;
+       }
+
+       IPW_DEBUG_INFO("TODO: implement scan state machine\n");
+
+fail_up:
+       up(&priv->adapter_sem);
+       return err;
+}
+
+int ipw2100_set_scan_options(struct ipw2100_priv *priv)
+{
+       struct host_command cmd = {
+               .host_command = SET_SCAN_OPTIONS,
+               .host_command_sequence = 0,
+               .host_command_length = 8
+       };
+       int err;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       IPW_DEBUG_SCAN("setting scan options\n");
+
+       cmd.host_command_parameters[0] = 0;
+
+       if (!(priv->config & CFG_ASSOCIATE))
+               cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
+       if ((priv->sec.flags & SEC_ENABLED) && priv->sec.enabled)
+               cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
+       if (priv->config & CFG_PASSIVE_SCAN)
+               cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
+
+       cmd.host_command_parameters[1] = priv->channel_mask;
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
+                    cmd.host_command_parameters[0]);
+
+       return err;
+}
+
+int ipw2100_start_scan(struct ipw2100_priv *priv)
+{
+       struct host_command cmd = {
+               .host_command = BROADCAST_SCAN,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err;
+
+       IPW_DEBUG_HC("START_SCAN\n");
+
+       cmd.host_command_parameters[0] = 0;
+
+       /* No scanning if in monitor mode */
+       if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+               return 1;
+
+       if (priv->status & STATUS_SCANNING) {
+               IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
+               return 0;
+       }
+
+       IPW_DEBUG_INFO("enter\n");
+
+       /* Not clearing here; doing so makes iwlist always return nothing...
+        *
+        * We should modify the table logic to use aging tables vs. clearing
+        * the table on each scan start.
+        */
+       IPW_DEBUG_SCAN("starting scan\n");
+
+       priv->status |= STATUS_SCANNING;
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err)
+               priv->status &= ~STATUS_SCANNING;
+
+       IPW_DEBUG_INFO("exit\n");
+
+       return err;
+}
+
+static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
+{
+       unsigned long flags;
+       int rc = 0;
+       u32 lock;
+       u32 ord_len = sizeof(lock);
+
+       /* Quite if manually disabled. */
+       if (priv->status & STATUS_RF_KILL_SW) {
+               IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
+                              "switch\n", priv->net_dev->name);
+               return 0;
+       }
+
+       /* If the interrupt is enabled, turn it off... */
+       spin_lock_irqsave(&priv->low_lock, flags);
+       ipw2100_disable_interrupts(priv);
+
+       /* Reset any fatal_error conditions */
+       ipw2100_reset_fatalerror(priv);
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+       if (priv->status & STATUS_POWERED ||
+           (priv->status & STATUS_RESET_PENDING)) {
+               /* Power cycle the card ... */
+               if (ipw2100_power_cycle_adapter(priv)) {
+                       IPW_DEBUG_WARNING("%s: Could not cycle adapter.\n",
+                                         priv->net_dev->name);
+                       rc = 1;
+                       goto exit;
+               }
+       } else
+               priv->status |= STATUS_POWERED;
+
+       /* Load the firmeware, start the clocks, etc. */
+       if (ipw2100_start_adapter(priv)) {
+               IPW_DEBUG_ERROR("%s: Failed to start the firmware.\n",
+                               priv->net_dev->name);
+               rc = 1;
+               goto exit;
+       }
+
+       ipw2100_initialize_ordinals(priv);
+
+       /* Determine capabilities of this particular HW configuration */
+       if (ipw2100_get_hw_features(priv)) {
+               IPW_DEBUG_ERROR("%s: Failed to determine HW features.\n",
+                               priv->net_dev->name);
+               rc = 1;
+               goto exit;
+       }
+
+       lock = LOCK_NONE;
+       if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
+               IPW_DEBUG_ERROR("%s: Failed to clear ordinal lock.\n",
+                               priv->net_dev->name);
+               rc = 1;
+               goto exit;
+       }
+
+       priv->status &= ~STATUS_SCANNING;
+
+       if (rf_kill_active(priv)) {
+               printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
+                      priv->net_dev->name);
+
+               if (priv->stop_rf_kill) {
+                       priv->stop_rf_kill = 0;
+                       queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+               }
+
+               deferred = 1;
+       }
+
+       /* Turn on the interrupt so that commands can be processed */
+       ipw2100_enable_interrupts(priv);
+
+       /* Send all of the commands that must be sent prior to
+        * HOST_COMPLETE */
+       if (ipw2100_adapter_setup(priv)) {
+               IPW_DEBUG_ERROR("%s: Failed to start the card.\n",
+                               priv->net_dev->name);
+               rc = 1;
+               goto exit;
+       }
+
+       if (!deferred) {
+               /* Enable the adapter - sends HOST_COMPLETE */
+               if (ipw2100_enable_adapter(priv)) {
+                       IPW_DEBUG_ERROR(
+                               "%s: failed in call to enable adapter.\n",
+                               priv->net_dev->name);
+                       ipw2100_hw_stop_adapter(priv);
+                       rc = 1;
+                       goto exit;
+               }
+
+
+               /* Start a scan . . . */
+               ipw2100_set_scan_options(priv);
+               ipw2100_start_scan(priv);
+       }
+
+ exit:
+       return rc;
+}
+
+/* Called by register_netdev() */
+static int ipw2100_net_init(struct net_device *dev)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       return ipw2100_up(priv, 1);
+}
+
+static void ipw2100_down(struct ipw2100_priv *priv)
+{
+       unsigned long flags;
+       union iwreq_data wrqu = {
+               .ap_addr = {
+                       .sa_family = ARPHRD_ETHER
+               }
+       };
+       int associated = priv->status & STATUS_ASSOCIATED;
+
+       /* Kill the RF switch timer */
+       if (!priv->stop_rf_kill) {
+               priv->stop_rf_kill = 1;
+               cancel_delayed_work(&priv->rf_kill);
+       }
+
+       /* Kill the firmare hang check timer */
+       if (!priv->stop_hang_check) {
+               priv->stop_hang_check = 1;
+               cancel_delayed_work(&priv->hang_check);
+       }
+
+       /* Kill any pending resets */
+       if (priv->status & STATUS_RESET_PENDING)
+               cancel_delayed_work(&priv->reset_work);
+
+       /* Make sure the interrupt is on so that FW commands will be
+        * processed correctly */
+       spin_lock_irqsave(&priv->low_lock, flags);
+       ipw2100_enable_interrupts(priv);
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+       if (ipw2100_hw_stop_adapter(priv))
+               IPW_DEBUG_ERROR("%s: Error stopping adapter.\n",
+                      priv->net_dev->name);
+
+       /* Do not disable the interrupt until _after_ we disable
+        * the adaptor.  Otherwise the CARD_DISABLE command will never
+        * be ack'd by the firmware */
+       spin_lock_irqsave(&priv->low_lock, flags);
+       ipw2100_disable_interrupts(priv);
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+       if (priv->config & CFG_C3_DISABLED) {
+               IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n");
+               acpi_set_cstate_limit(priv->cstate_limit);
+               priv->config &= ~CFG_C3_DISABLED;
+       }
+#endif
+
+       /* We have to signal any supplicant if we are disassociating */
+       if (associated)
+               wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+
+       priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+       netif_carrier_off(priv->net_dev);
+       netif_stop_queue(priv->net_dev);
+}
+
+void ipw2100_reset_adapter(struct ipw2100_priv *priv)
+{
+       unsigned long flags;
+       union iwreq_data wrqu = {
+               .ap_addr = {
+                       .sa_family = ARPHRD_ETHER
+               }
+       };
+       int associated = priv->status & STATUS_ASSOCIATED;
+
+       spin_lock_irqsave(&priv->low_lock, flags);
+       IPW_DEBUG_INFO(DRV_NAME ": %s: Restarting adapter.\n",
+                      priv->net_dev->name);
+       priv->resets++;
+       priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+       priv->status |= STATUS_SECURITY_UPDATED;
+
+       /* Force a power cycle even if interface hasn't been opened
+        * yet */
+       cancel_delayed_work(&priv->reset_work);
+       priv->status |= STATUS_RESET_PENDING;
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+       down(&priv->action_sem);
+       /* stop timed checks so that they don't interfere with reset */
+       priv->stop_hang_check = 1;
+       cancel_delayed_work(&priv->hang_check);
+
+       /* We have to signal any supplicant if we are disassociating */
+       if (associated)
+               wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+
+       ipw2100_up(priv, 0);
+       up(&priv->action_sem);
+
+}
+
+
+static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
+{
+
+#define MAC_ASSOCIATION_READ_DELAY (HZ)
+       int ret, len, essid_len;
+       char essid[IW_ESSID_MAX_SIZE];
+       u32 txrate;
+       u32 chan;
+       char *txratename;
+       u8 bssid[ETH_ALEN];
+
+       /*
+        * TBD: BSSID is usually 00:00:00:00:00:00 here and not
+        *      an actual MAC of the AP. Seems like FW sets this
+        *      address too late. Read it later and expose through
+        *      /proc or schedule a later task to query and update
+        */
+
+       essid_len = IW_ESSID_MAX_SIZE;
+       ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
+                                 essid, &essid_len);
+       if (ret) {
+               IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+                                  __LINE__);
+               return;
+       }
+
+       len = sizeof(u32);
+       ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE,
+                                 &txrate, &len);
+       if (ret) {
+               IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+                                  __LINE__);
+               return;
+       }
+
+       len = sizeof(u32);
+       ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
+       if (ret) {
+               IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+                                  __LINE__);
+               return;
+       }
+       len = ETH_ALEN;
+        ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid,  &len);
+       if (ret) {
+               IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+                                  __LINE__);
+               return;
+       }
+       memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
+
+
+       switch (txrate) {
+       case TX_RATE_1_MBIT:
+               txratename = "1Mbps";
+               break;
+       case TX_RATE_2_MBIT:
+               txratename = "2Mbsp";
+               break;
+       case TX_RATE_5_5_MBIT:
+               txratename = "5.5Mbps";
+               break;
+       case TX_RATE_11_MBIT:
+               txratename = "11Mbps";
+               break;
+       default:
+               IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
+               txratename = "unknown rate";
+               break;
+       }
+
+       IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID="
+                      MAC_FMT ")\n",
+                      priv->net_dev->name, escape_essid(essid, essid_len),
+                      txratename, chan, MAC_ARG(bssid));
+
+       /* now we copy read ssid into dev */
+       if (!(priv->config & CFG_STATIC_ESSID)) {
+               priv->essid_len = min((u8)essid_len, (u8)IW_ESSID_MAX_SIZE);
+               memcpy(priv->essid, essid, priv->essid_len);
+       }
+       priv->channel = chan;
+       memcpy(priv->bssid, bssid, ETH_ALEN);
+
+       priv->status |= STATUS_ASSOCIATING;
+       priv->connect_start = get_seconds();
+
+       queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
+}
+
+
+int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
+                     int length, int batch_mode)
+{
+       int ssid_len = min(length, IW_ESSID_MAX_SIZE);
+       struct host_command cmd = {
+               .host_command = SSID,
+               .host_command_sequence = 0,
+               .host_command_length = ssid_len
+       };
+       int err;
+
+       IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len));
+
+       if (ssid_len)
+               memcpy((char*)cmd.host_command_parameters,
+                      essid, ssid_len);
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
+        * disable auto association -- so we cheat by setting a bogus SSID */
+       if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
+               int i;
+               u8 *bogus = (u8*)cmd.host_command_parameters;
+               for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
+                       bogus[i] = 0x18 + i;
+               cmd.host_command_length = IW_ESSID_MAX_SIZE;
+       }
+
+       /* NOTE:  We always send the SSID command even if the provided ESSID is
+        * the same as what we currently think is set. */
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (!err) {
+               memset(priv->essid + ssid_len, 0,
+                      IW_ESSID_MAX_SIZE - ssid_len);
+               memcpy(priv->essid, essid, ssid_len);
+               priv->essid_len = ssid_len;
+       }
+
+       if (!batch_mode) {
+               if (ipw2100_enable_adapter(priv))
+                       err = -EIO;
+       }
+
+       return err;
+}
+
+static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
+{
+       IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
+                 "disassociated: '%s' " MAC_FMT " \n",
+                 escape_essid(priv->essid, priv->essid_len),
+                 MAC_ARG(priv->bssid));
+
+       priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
+
+       if (priv->status & STATUS_STOPPING) {
+               IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
+               return;
+       }
+
+       memset(priv->bssid, 0, ETH_ALEN);
+       memset(priv->ieee->bssid, 0, ETH_ALEN);
+
+       netif_carrier_off(priv->net_dev);
+       netif_stop_queue(priv->net_dev);
+
+       if (!(priv->status & STATUS_RUNNING))
+               return;
+
+       if (priv->status & STATUS_SECURITY_UPDATED)
+               queue_work(priv->workqueue, &priv->security_work);
+
+       queue_work(priv->workqueue, &priv->wx_event_work);
+}
+
+static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
+{
+       IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
+              priv->net_dev->name);
+
+       /* RF_KILL is now enabled (else we wouldn't be here) */
+       priv->status |= STATUS_RF_KILL_HW;
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+       if (priv->config & CFG_C3_DISABLED) {
+               IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n");
+               acpi_set_cstate_limit(priv->cstate_limit);
+               priv->config &= ~CFG_C3_DISABLED;
+       }
+#endif
+
+       /* Make sure the RF Kill check timer is running */
+       priv->stop_rf_kill = 0;
+       cancel_delayed_work(&priv->rf_kill);
+       queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+}
+
+static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
+{
+       IPW_DEBUG_SCAN("scan complete\n");
+       /* Age the scan results... */
+       priv->ieee->scans++;
+       priv->status &= ~STATUS_SCANNING;
+}
+
+#ifdef CONFIG_IPW_DEBUG
+#define IPW2100_HANDLER(v, f) { v, f, # v }
+struct ipw2100_status_indicator {
+       int status;
+       void (*cb)(struct ipw2100_priv *priv, u32 status);
+       char *name;
+};
+#else
+#define IPW2100_HANDLER(v, f) { v, f }
+struct ipw2100_status_indicator {
+       int status;
+       void (*cb)(struct ipw2100_priv *priv, u32 status);
+};
+#endif /* CONFIG_IPW_DEBUG */
+
+static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
+{
+       IPW_DEBUG_SCAN("Scanning...\n");
+       priv->status |= STATUS_SCANNING;
+}
+
+const struct ipw2100_status_indicator status_handlers[] = {
+       IPW2100_HANDLER(IPW_STATE_INITIALIZED, 0),
+       IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, 0),
+       IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
+       IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
+       IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, 0),
+       IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
+       IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, 0),
+       IPW2100_HANDLER(IPW_STATE_LEFT_PSP, 0),
+       IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
+       IPW2100_HANDLER(IPW_STATE_DISABLED, 0),
+       IPW2100_HANDLER(IPW_STATE_POWER_DOWN, 0),
+       IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
+       IPW2100_HANDLER(-1, 0)
+};
+
+
+static void isr_status_change(struct ipw2100_priv *priv, int status)
+{
+       int i;
+
+       if (status == IPW_STATE_SCANNING &&
+           priv->status & STATUS_ASSOCIATED &&
+           !(priv->status & STATUS_SCANNING)) {
+               IPW_DEBUG_INFO("Scan detected while associated, with "
+                              "no scan request.  Restarting firmware.\n");
+
+               /* Wake up any sleeping jobs */
+               schedule_reset(priv);
+       }
+
+       for (i = 0; status_handlers[i].status != -1; i++) {
+               if (status == status_handlers[i].status) {
+                       IPW_DEBUG_NOTIF("Status change: %s\n",
+                                        status_handlers[i].name);
+                       if (status_handlers[i].cb)
+                               status_handlers[i].cb(priv, status);
+                       priv->wstats.status = status;
+                       return;
+               }
+       }
+
+       IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
+}
+
+static void isr_rx_complete_command(
+       struct ipw2100_priv *priv,
+       struct ipw2100_cmd_header *cmd)
+{
+#ifdef CONFIG_IPW_DEBUG
+       if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
+               IPW_DEBUG_HC("Command completed '%s (%d)'\n",
+                            command_types[cmd->host_command_reg],
+                            cmd->host_command_reg);
+       }
+#endif
+       if (cmd->host_command_reg == HOST_COMPLETE)
+               priv->status |= STATUS_ENABLED;
+
+       if (cmd->host_command_reg == CARD_DISABLE)
+               priv->status &= ~STATUS_ENABLED;
+
+       priv->status &= ~STATUS_CMD_ACTIVE;
+
+       wake_up_interruptible(&priv->wait_command_queue);
+}
+
+#ifdef CONFIG_IPW_DEBUG
+const char *frame_types[] = {
+       "COMMAND_STATUS_VAL",
+       "STATUS_CHANGE_VAL",
+       "P80211_DATA_VAL",
+       "P8023_DATA_VAL",
+       "HOST_NOTIFICATION_VAL"
+};
+#endif
+
+
+static inline int ipw2100_alloc_skb(
+       struct ipw2100_priv *priv,
+       struct ipw2100_rx_packet *packet)
+{
+       packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
+       if (!packet->skb)
+               return -ENOMEM;
+
+       packet->rxp = (struct ipw2100_rx *)packet->skb->data;
+       packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
+                                         sizeof(struct ipw2100_rx),
+                                         PCI_DMA_FROMDEVICE);
+       /* NOTE: pci_map_single does not return an error code, and 0 is a valid
+        *       dma_addr */
+
+       return 0;
+}
+
+
+#define SEARCH_ERROR   0xffffffff
+#define SEARCH_FAIL    0xfffffffe
+#define SEARCH_SUCCESS 0xfffffff0
+#define SEARCH_DISCARD 0
+#define SEARCH_SNAPSHOT 1
+
+#define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
+static inline int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
+{
+       int i;
+       if (priv->snapshot[0])
+               return 1;
+       for (i = 0; i < 0x30; i++) {
+               priv->snapshot[i] = (u8*)kmalloc(0x1000, GFP_ATOMIC);
+               if (!priv->snapshot[i]) {
+                       IPW_DEBUG_INFO("%s: Error allocating snapshot "
+                              "buffer %d\n", priv->net_dev->name, i);
+                       while (i > 0)
+                               kfree(priv->snapshot[--i]);
+                       priv->snapshot[0] = NULL;
+                       return 0;
+               }
+       }
+
+       return 1;
+}
+
+static inline void ipw2100_snapshot_free(struct ipw2100_priv *priv)
+{
+       int i;
+       if (!priv->snapshot[0])
+               return;
+       for (i = 0; i < 0x30; i++)
+               kfree(priv->snapshot[i]);
+       priv->snapshot[0] = NULL;
+}
+
+static inline u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 *in_buf,
+                                   size_t len, int mode)
+{
+       u32 i, j;
+       u32 tmp;
+       u8 *s, *d;
+       u32 ret;
+
+       s = in_buf;
+       if (mode == SEARCH_SNAPSHOT) {
+               if (!ipw2100_snapshot_alloc(priv))
+                       mode = SEARCH_DISCARD;
+       }
+
+       for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
+               read_nic_dword(priv->net_dev, i, &tmp);
+               if (mode == SEARCH_SNAPSHOT)
+                       *(u32 *)SNAPSHOT_ADDR(i) = tmp;
+               if (ret == SEARCH_FAIL) {
+                       d = (u8*)&tmp;
+                       for (j = 0; j < 4; j++) {
+                               if (*s != *d) {
+                                       s = in_buf;
+                                       continue;
+                               }
+
+                               s++;
+                               d++;
+
+                               if ((s - in_buf) == len)
+                                       ret = (i + j) - len + 1;
+                       }
+               } else if (mode == SEARCH_DISCARD)
+                       return ret;
+       }
+
+       return ret;
+}
+
+/*
+ *
+ * 0) Disconnect the SKB from the firmware (just unmap)
+ * 1) Pack the ETH header into the SKB
+ * 2) Pass the SKB to the network stack
+ *
+ * When packet is provided by the firmware, it contains the following:
+ *
+ * .  ieee80211_hdr
+ * .  ieee80211_snap_hdr
+ *
+ * The size of the constructed ethernet
+ *
+ */
+#ifdef CONFIG_IPW2100_RX_DEBUG
+u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
+#endif
+
+static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv,
+                                              int i)
+{
+#ifdef CONFIG_IPW_DEBUG_C3
+       struct ipw2100_status *status = &priv->status_queue.drv[i];
+       u32 match, reg;
+       int j;
+#endif
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+       int limit;
+#endif
+
+       IPW_DEBUG_INFO(DRV_NAME ": PCI latency error detected at "
+                      "0x%04X.\n", i * sizeof(struct ipw2100_status));
+
+#ifdef ACPI_CSTATE_LIMIT_DEFINED
+       IPW_DEBUG_INFO(DRV_NAME ": Disabling C3 transitions.\n");
+       limit = acpi_get_cstate_limit();
+       if (limit > 2) {
+               priv->cstate_limit = limit;
+               acpi_set_cstate_limit(2);
+               priv->config |= CFG_C3_DISABLED;
+       }
+#endif
+
+#ifdef CONFIG_IPW_DEBUG_C3
+       /* Halt the fimrware so we can get a good image */
+       write_register(priv->net_dev, IPW_REG_RESET_REG,
+                      IPW_AUX_HOST_RESET_REG_STOP_MASTER);
+       j = 5;
+       do {
+               udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
+               read_register(priv->net_dev, IPW_REG_RESET_REG, &reg);
+
+               if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
+                       break;
+       }  while (j--);
+
+       match = ipw2100_match_buf(priv, (u8*)status,
+                                 sizeof(struct ipw2100_status),
+                                 SEARCH_SNAPSHOT);
+       if (match < SEARCH_SUCCESS)
+               IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
+                              "offset 0x%06X, length %d:\n",
+                              priv->net_dev->name, match,
+                              sizeof(struct ipw2100_status));
+       else
+               IPW_DEBUG_INFO("%s: No DMA status match in "
+                              "Firmware.\n", priv->net_dev->name);
+
+       printk_buf((u8*)priv->status_queue.drv,
+                  sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
+#endif
+
+       priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
+       priv->ieee->stats.rx_errors++;
+       schedule_reset(priv);
+}
+
+static inline void isr_rx(struct ipw2100_priv *priv, int i,
+                         struct ieee80211_rx_stats *stats)
+{
+       struct ipw2100_status *status = &priv->status_queue.drv[i];
+       struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
+
+       IPW_DEBUG_RX("Handler...\n");
+
+       if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
+               IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
+                              "  Dropping.\n",
+                              priv->net_dev->name,
+                              status->frame_size, skb_tailroom(packet->skb));
+               priv->ieee->stats.rx_errors++;
+               return;
+       }
+
+       if (unlikely(!netif_running(priv->net_dev))) {
+               priv->ieee->stats.rx_errors++;
+               priv->wstats.discard.misc++;
+               IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
+               return;
+       }
+
+       if (unlikely(priv->ieee->iw_mode == IW_MODE_MONITOR &&
+                    status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
+               IPW_DEBUG_RX("CRC error in packet.  Dropping.\n");
+               priv->ieee->stats.rx_errors++;
+               return;
+       }
+
+       if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
+               !(priv->status & STATUS_ASSOCIATED))) {
+               IPW_DEBUG_DROP("Dropping packet while not associated.\n");
+               priv->wstats.discard.misc++;
+               return;
+       }
+
+
+       pci_unmap_single(priv->pci_dev,
+                        packet->dma_addr,
+                        sizeof(struct ipw2100_rx),
+                        PCI_DMA_FROMDEVICE);
+
+       skb_put(packet->skb, status->frame_size);
+
+#ifdef CONFIG_IPW2100_RX_DEBUG
+       /* Make a copy of the frame so we can dump it to the logs if
+        * ieee80211_rx fails */
+       memcpy(packet_data, packet->skb->data,
+              min(status->frame_size, IPW_RX_NIC_BUFFER_LENGTH));
+#endif
+
+       if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
+#ifdef CONFIG_IPW2100_RX_DEBUG
+               IPW_DEBUG_DROP("%s: Non consumed packet:\n",
+                              priv->net_dev->name);
+               printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
+#endif
+               priv->ieee->stats.rx_errors++;
+
+               /* ieee80211_rx failed, so it didn't free the SKB */
+               dev_kfree_skb_any(packet->skb);
+               packet->skb = NULL;
+       }
+
+       /* We need to allocate a new SKB and attach it to the RDB. */
+       if (unlikely(ipw2100_alloc_skb(priv, packet))) {
+               IPW_DEBUG_WARNING(
+                       "%s: Unable to allocate SKB onto RBD ring - disabling "
+                       "adapter.\n", priv->net_dev->name);
+               /* TODO: schedule adapter shutdown */
+               IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
+       }
+
+       /* Update the RDB entry */
+       priv->rx_queue.drv[i].host_addr = packet->dma_addr;
+}
+
+static inline int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
+{
+       struct ipw2100_status *status = &priv->status_queue.drv[i];
+       struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
+       u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
+
+       switch (frame_type) {
+       case COMMAND_STATUS_VAL:
+               return (status->frame_size != sizeof(u->rx_data.command));
+       case STATUS_CHANGE_VAL:
+               return (status->frame_size != sizeof(u->rx_data.status));
+       case HOST_NOTIFICATION_VAL:
+               return (status->frame_size < sizeof(u->rx_data.notification));
+       case P80211_DATA_VAL:
+       case P8023_DATA_VAL:
+#ifdef CONFIG_IPW2100_MONITOR
+               return 0;
+#else
+               switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
+               case IEEE80211_FTYPE_MGMT:
+               case IEEE80211_FTYPE_CTL:
+                       return 0;
+               case IEEE80211_FTYPE_DATA:
+                       return (status->frame_size >
+                               IPW_MAX_802_11_PAYLOAD_LENGTH);
+               }
+#endif
+       }
+
+       return 1;
+}
+
+/*
+ * ipw2100 interrupts are disabled at this point, and the ISR
+ * is the only code that calls this method.  So, we do not need
+ * to play with any locks.
+ *
+ * RX Queue works as follows:
+ *
+ * Read index - firmware places packet in entry identified by the
+ *              Read index and advances Read index.  In this manner,
+ *              Read index will always point to the next packet to
+ *              be filled--but not yet valid.
+ *
+ * Write index - driver fills this entry with an unused RBD entry.
+ *               This entry has not filled by the firmware yet.
+ *
+ * In between the W and R indexes are the RBDs that have been received
+ * but not yet processed.
+ *
+ * The process of handling packets will start at WRITE + 1 and advance
+ * until it reaches the READ index.
+ *
+ * The WRITE index is cached in the variable 'priv->rx_queue.next'.
+ *
+ */
+static inline void __ipw2100_rx_process(struct ipw2100_priv *priv)
+{
+       struct ipw2100_bd_queue *rxq = &priv->rx_queue;
+       struct ipw2100_status_queue *sq = &priv->status_queue;
+       struct ipw2100_rx_packet *packet;
+       u16 frame_type;
+       u32 r, w, i, s;
+       struct ipw2100_rx *u;
+       struct ieee80211_rx_stats stats = {
+               .mac_time = jiffies,
+       };
+
+       read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
+       read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
+
+       if (r >= rxq->entries) {
+               IPW_DEBUG_RX("exit - bad read index\n");
+               return;
+       }
+
+       i = (rxq->next + 1) % rxq->entries;
+       s = i;
+       while (i != r) {
+               /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
+                  r, rxq->next, i); */
+
+               packet = &priv->rx_buffers[i];
+
+               /* Sync the DMA for the STATUS buffer so CPU is sure to get
+                * the correct values */
+               pci_dma_sync_single_for_cpu(
+                       priv->pci_dev,
+                       sq->nic + sizeof(struct ipw2100_status) * i,
+                       sizeof(struct ipw2100_status),
+                       PCI_DMA_FROMDEVICE);
+
+               /* Sync the DMA for the RX buffer so CPU is sure to get
+                * the correct values */
+               pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
+                                           sizeof(struct ipw2100_rx),
+                                           PCI_DMA_FROMDEVICE);
+
+               if (unlikely(ipw2100_corruption_check(priv, i))) {
+                       ipw2100_corruption_detected(priv, i);
+                       goto increment;
+               }
+
+               u = packet->rxp;
+               frame_type = sq->drv[i].status_fields &
+                       STATUS_TYPE_MASK;
+               stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
+               stats.len = sq->drv[i].frame_size;
+
+               stats.mask = 0;
+               if (stats.rssi != 0)
+                       stats.mask |= IEEE80211_STATMASK_RSSI;
+               stats.freq = IEEE80211_24GHZ_BAND;
+
+               IPW_DEBUG_RX(
+                       "%s: '%s' frame type received (%d).\n",
+                       priv->net_dev->name, frame_types[frame_type],
+                       stats.len);
+
+               switch (frame_type) {
+               case COMMAND_STATUS_VAL:
+                       /* Reset Rx watchdog */
+                       isr_rx_complete_command(
+                               priv, &u->rx_data.command);
+                       break;
+
+               case STATUS_CHANGE_VAL:
+                       isr_status_change(priv, u->rx_data.status);
+                       break;
+
+               case P80211_DATA_VAL:
+               case P8023_DATA_VAL:
+#ifdef CONFIG_IPW2100_MONITOR
+                       if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+                               isr_rx(priv, i, &stats);
+                               break;
+                       }
+#endif
+                       if (stats.len < sizeof(u->rx_data.header))
+                               break;
+                       switch (WLAN_FC_GET_TYPE(u->rx_data.header.
+                                                frame_ctl)) {
+                       case IEEE80211_FTYPE_MGMT:
+                               ieee80211_rx_mgt(priv->ieee,
+                                                &u->rx_data.header,
+                                                &stats);
+                               break;
+
+                       case IEEE80211_FTYPE_CTL:
+                               break;
+
+                       case IEEE80211_FTYPE_DATA:
+                               isr_rx(priv, i, &stats);
+                               break;
+
+                       }
+                       break;
+               }
+
+       increment:
+               /* clear status field associated with this RBD */
+               rxq->drv[i].status.info.field = 0;
+
+               i = (i + 1) % rxq->entries;
+       }
+
+       if (i != s) {
+               /* backtrack one entry, wrapping to end if at 0 */
+               rxq->next = (i ? i : rxq->entries) - 1;
+
+               write_register(priv->net_dev,
+                              IPW_MEM_HOST_SHARED_RX_WRITE_INDEX,
+                              rxq->next);
+       }
+}
+
+
+/*
+ * __ipw2100_tx_process
+ *
+ * This routine will determine whether the next packet on
+ * the fw_pend_list has been processed by the firmware yet.
+ *
+ * If not, then it does nothing and returns.
+ *
+ * If so, then it removes the item from the fw_pend_list, frees
+ * any associated storage, and places the item back on the
+ * free list of its source (either msg_free_list or tx_free_list)
+ *
+ * TX Queue works as follows:
+ *
+ * Read index - points to the next TBD that the firmware will
+ *              process.  The firmware will read the data, and once
+ *              done processing, it will advance the Read index.
+ *
+ * Write index - driver fills this entry with an constructed TBD
+ *               entry.  The Write index is not advanced until the
+ *               packet has been configured.
+ *
+ * In between the W and R indexes are the TBDs that have NOT been
+ * processed.  Lagging behind the R index are packets that have
+ * been processed but have not been freed by the driver.
+ *
+ * In order to free old storage, an internal index will be maintained
+ * that points to the next packet to be freed.  When all used
+ * packets have been freed, the oldest index will be the same as the
+ * firmware's read index.
+ *
+ * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
+ *
+ * Because the TBD structure can not contain arbitrary data, the
+ * driver must keep an internal queue of cached allocations such that
+ * it can put that data back into the tx_free_list and msg_free_list
+ * for use by future command and data packets.
+ *
+ */
+static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
+{
+       struct ipw2100_bd_queue *txq = &priv->tx_queue;
+        struct ipw2100_bd *tbd;
+       struct list_head *element;
+       struct ipw2100_tx_packet *packet;
+       int descriptors_used;
+       int e, i;
+       u32 r, w, frag_num = 0;
+
+       if (list_empty(&priv->fw_pend_list))
+               return 0;
+
+       element = priv->fw_pend_list.next;
+
+       packet = list_entry(element, struct ipw2100_tx_packet, list);
+        tbd = &txq->drv[packet->index];
+
+       /* Determine how many TBD entries must be finished... */
+       switch (packet->type) {
+       case COMMAND:
+               /* COMMAND uses only one slot; don't advance */
+               descriptors_used = 1;
+               e = txq->oldest;
+               break;
+
+       case DATA:
+               /* DATA uses two slots; advance and loop position. */
+               descriptors_used = tbd->num_fragments;
+                frag_num = tbd->num_fragments - 1;
+               e = txq->oldest + frag_num;
+               e %= txq->entries;
+               break;
+
+       default:
+               IPW_DEBUG_WARNING("%s: Bad fw_pend_list entry!\n",
+                                  priv->net_dev->name);
+               return 0;
+       }
+
+       /* if the last TBD is not done by NIC yet, then packet is
+        * not ready to be released.
+        *
+        */
+       read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
+                     &r);
+       read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+                     &w);
+       if (w != txq->next)
+               IPW_DEBUG_WARNING("%s: write index mismatch\n",
+                      priv->net_dev->name);
+
+        /*
+        * txq->next is the index of the last packet written txq->oldest is
+        * the index of the r is the index of the next packet to be read by
+        * firmware
+        */
+
+
+       /*
+        * Quick graphic to help you visualize the following
+        * if / else statement
+        *
+        * ===>|                     s---->|===============
+        *                               e>|
+        * | a | b | c | d | e | f | g | h | i | j | k | l
+        *       r---->|
+        *               w
+        *
+        * w - updated by driver
+        * r - updated by firmware
+        * s - start of oldest BD entry (txq->oldest)
+        * e - end of oldest BD entry
+        *
+        */
+       if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
+               IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
+               return 0;
+       }
+
+       list_del(element);
+       DEC_STAT(&priv->fw_pend_stat);
+
+#ifdef CONFIG_IPW_DEBUG
+       {
+               int i = txq->oldest;
+               IPW_DEBUG_TX(
+                       "TX%d V=%p P=%p T=%p L=%d\n", i,
+                       &txq->drv[i],
+                       (void*)txq->nic + i * sizeof(struct ipw2100_bd),
+                       (void*)txq->drv[i].host_addr,
+                       txq->drv[i].buf_length);
+
+               if (packet->type == DATA) {
+                       i = (i + 1) % txq->entries;
+
+                       IPW_DEBUG_TX(
+                               "TX%d V=%p P=%p T=%p L=%d\n", i,
+                               &txq->drv[i],
+                               (void*)txq->nic + i *
+                               sizeof(struct ipw2100_bd),
+                               (void*)txq->drv[i].host_addr,
+                               txq->drv[i].buf_length);
+               }
+       }
+#endif
+
+       switch (packet->type) {
+       case DATA:
+               if (txq->drv[txq->oldest].status.info.fields.txType != 0)
+                       IPW_DEBUG_WARNING("%s: Queue mismatch.  "
+                              "Expecting DATA TBD but pulled "
+                              "something else: ids %d=%d.\n",
+                              priv->net_dev->name, txq->oldest, packet->index);
+
+               /* DATA packet; we have to unmap and free the SKB */
+               priv->ieee->stats.tx_packets++;
+               for (i = 0; i < frag_num; i++) {
+                       tbd = &txq->drv[(packet->index + 1 + i) %
+                                       txq->entries];
+
+                       IPW_DEBUG_TX(
+                               "TX%d P=%08x L=%d\n",
+                               (packet->index + 1 + i) % txq->entries,
+                               tbd->host_addr, tbd->buf_length);
+
+                       pci_unmap_single(priv->pci_dev,
+                                        tbd->host_addr,
+                                        tbd->buf_length,
+                                        PCI_DMA_TODEVICE);
+               }
+
+               priv->ieee->stats.tx_bytes += packet->info.d_struct.txb->payload_size;
+               ieee80211_txb_free(packet->info.d_struct.txb);
+               packet->info.d_struct.txb = NULL;
+
+               list_add_tail(element, &priv->tx_free_list);
+               INC_STAT(&priv->tx_free_stat);
+
+               /* We have a free slot in the Tx queue, so wake up the
+                * transmit layer if it is stopped. */
+               if (priv->status & STATUS_ASSOCIATED &&
+                   netif_queue_stopped(priv->net_dev)) {
+                       IPW_DEBUG_INFO(KERN_INFO
+                                          "%s: Waking net queue.\n",
+                                          priv->net_dev->name);
+                       netif_wake_queue(priv->net_dev);
+               }
+
+               /* A packet was processed by the hardware, so update the
+                * watchdog */
+               priv->net_dev->trans_start = jiffies;
+
+               break;
+
+       case COMMAND:
+               if (txq->drv[txq->oldest].status.info.fields.txType != 1)
+                       IPW_DEBUG_WARNING("%s: Queue mismatch.  "
+                              "Expecting COMMAND TBD but pulled "
+                              "something else: ids %d=%d.\n",
+                              priv->net_dev->name, txq->oldest, packet->index);
+
+#ifdef CONFIG_IPW_DEBUG
+               if (packet->info.c_struct.cmd->host_command_reg <
+                   sizeof(command_types) / sizeof(*command_types))
+                       IPW_DEBUG_TX(
+                               "Command '%s (%d)' processed: %d.\n",
+                               command_types[packet->info.c_struct.cmd->host_command_reg],
+                               packet->info.c_struct.cmd->host_command_reg,
+                               packet->info.c_struct.cmd->cmd_status_reg);
+#endif
+
+               list_add_tail(element, &priv->msg_free_list);
+               INC_STAT(&priv->msg_free_stat);
+               break;
+       }
+
+       /* advance oldest used TBD pointer to start of next entry */
+       txq->oldest = (e + 1) % txq->entries;
+       /* increase available TBDs number */
+       txq->available += descriptors_used;
+       SET_STAT(&priv->txq_stat, txq->available);
+
+       IPW_DEBUG_TX("packet latency (send to process)  %ld jiffies\n",
+                        jiffies - packet->jiffy_start);
+
+       return (!list_empty(&priv->fw_pend_list));
+}
+
+
+static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
+{
+       int i = 0;
+
+       while (__ipw2100_tx_process(priv) && i < 200) i++;
+
+       if (i == 200) {
+               IPW_DEBUG_WARNING(
+                      "%s: Driver is running slow (%d iters).\n",
+                      priv->net_dev->name, i);
+       }
+}
+
+
+static void X__ipw2100_tx_send_commands(struct ipw2100_priv *priv)
+{
+       struct list_head *element;
+       struct ipw2100_tx_packet *packet;
+       struct ipw2100_bd_queue *txq = &priv->tx_queue;
+       struct ipw2100_bd *tbd;
+       int next = txq->next;
+
+       while (!list_empty(&priv->msg_pend_list)) {
+               /* if there isn't enough space in TBD queue, then
+                * don't stuff a new one in.
+                * NOTE: 3 are needed as a command will take one,
+                *       and there is a minimum of 2 that must be
+                *       maintained between the r and w indexes
+                */
+               if (txq->available <= 3) {
+                       IPW_DEBUG_TX("no room in tx_queue\n");
+                       break;
+               }
+
+               element = priv->msg_pend_list.next;
+               list_del(element);
+               DEC_STAT(&priv->msg_pend_stat);
+
+               packet = list_entry(element,
+                                   struct ipw2100_tx_packet, list);
+
+               IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
+                                &txq->drv[txq->next],
+                                (void*)(txq->nic + txq->next *
+                                        sizeof(struct ipw2100_bd)));
+
+               packet->index = txq->next;
+
+               tbd = &txq->drv[txq->next];
+
+               /* initialize TBD */
+               tbd->host_addr = packet->info.c_struct.cmd_phys;
+               tbd->buf_length = sizeof(struct ipw2100_cmd_header);
+               /* not marking number of fragments causes problems
+                * with f/w debug version */
+               tbd->num_fragments = 1;
+               tbd->status.info.field =
+                       IPW_BD_STATUS_TX_FRAME_COMMAND |
+                       IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
+
+               /* update TBD queue counters */
+               txq->next++;
+               txq->next %= txq->entries;
+               txq->available--;
+               DEC_STAT(&priv->txq_stat);
+
+               list_add_tail(element, &priv->fw_pend_list);
+               INC_STAT(&priv->fw_pend_stat);
+       }
+
+       if (txq->next != next) {
+               /* kick off the DMA by notifying firmware the
+                * write index has moved; make sure TBD stores are sync'd */
+               wmb();
+               write_register(priv->net_dev,
+                              IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+                              txq->next);
+       }
+}
+
+
+/*
+ * X__ipw2100_tx_send_data
+ *
+ */
+static void X__ipw2100_tx_send_data(struct ipw2100_priv *priv)
+{
+       struct list_head *element;
+       struct ipw2100_tx_packet *packet;
+       struct ipw2100_bd_queue *txq = &priv->tx_queue;
+       struct ipw2100_bd *tbd;
+       int next = txq->next;
+        int i = 0;
+       struct ipw2100_data_header *ipw_hdr;
+       struct ieee80211_hdr *hdr;
+
+       while (!list_empty(&priv->tx_pend_list)) {
+               /* if there isn't enough space in TBD queue, then
+                * don't stuff a new one in.
+                * NOTE: 4 are needed as a data will take two,
+                *       and there is a minimum of 2 that must be
+                *       maintained between the r and w indexes
+                */
+               element = priv->tx_pend_list.next;
+                packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+               if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
+                            IPW_MAX_BDS)) {
+                       /* TODO: Support merging buffers if more than
+                        * IPW_MAX_BDS are used */
+                       IPW_DEBUG_INFO(
+                              "%s: Maximum BD theshold exceeded.  "
+                              "Increase fragmentation level.\n",
+                              priv->net_dev->name);
+               }
+
+               if (txq->available <= 3 +
+                   packet->info.d_struct.txb->nr_frags) {
+                       IPW_DEBUG_TX("no room in tx_queue\n");
+                       break;
+               }
+
+               list_del(element);
+               DEC_STAT(&priv->tx_pend_stat);
+
+               tbd = &txq->drv[txq->next];
+
+               packet->index = txq->next;
+
+               ipw_hdr = packet->info.d_struct.data;
+               hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb->
+                       fragments[0]->data;
+
+               if (priv->ieee->iw_mode == IW_MODE_INFRA) {
+                       /* To DS: Addr1 = BSSID, Addr2 = SA,
+                          Addr3 = DA */
+                       memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
+                       memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
+               } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+                       /* not From/To DS: Addr1 = DA, Addr2 = SA,
+                          Addr3 = BSSID */
+                       memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
+                       memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
+               }
+
+               ipw_hdr->host_command_reg = SEND;
+               ipw_hdr->host_command_reg1 = 0;
+
+               /* For now we only support host based encryption */
+               ipw_hdr->needs_encryption = 0;
+               ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
+               if (packet->info.d_struct.txb->nr_frags > 1)
+                       ipw_hdr->fragment_size =
+                               packet->info.d_struct.txb->frag_size - IEEE80211_3ADDR_LEN;
+               else
+                       ipw_hdr->fragment_size = 0;
+
+               tbd->host_addr = packet->info.d_struct.data_phys;
+               tbd->buf_length = sizeof(struct ipw2100_data_header);
+               tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
+               tbd->status.info.field =
+                       IPW_BD_STATUS_TX_FRAME_802_3 |
+                       IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
+               txq->next++;
+               txq->next %= txq->entries;
+
+               IPW_DEBUG_TX(
+                       "data header tbd TX%d P=%08x L=%d\n",
+                       packet->index, tbd->host_addr,
+                       tbd->buf_length);
+#ifdef CONFIG_IPW_DEBUG
+               if (packet->info.d_struct.txb->nr_frags > 1)
+                       IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
+                                      packet->info.d_struct.txb->nr_frags);
+#endif
+
+                for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
+                       tbd = &txq->drv[txq->next];
+                       if (i == packet->info.d_struct.txb->nr_frags - 1)
+                               tbd->status.info.field =
+                                       IPW_BD_STATUS_TX_FRAME_802_3 |
+                                       IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
+                       else
+                               tbd->status.info.field =
+                                       IPW_BD_STATUS_TX_FRAME_802_3 |
+                                       IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
+
+                       tbd->buf_length = packet->info.d_struct.txb->
+                               fragments[i]->len - IEEE80211_3ADDR_LEN;
+
+                        tbd->host_addr = pci_map_single(
+                               priv->pci_dev,
+                               packet->info.d_struct.txb->fragments[i]->data +
+                               IEEE80211_3ADDR_LEN,
+                               tbd->buf_length,
+                               PCI_DMA_TODEVICE);
+
+                       IPW_DEBUG_TX(
+                               "data frag tbd TX%d P=%08x L=%d\n",
+                               txq->next, tbd->host_addr, tbd->buf_length);
+
+                       pci_dma_sync_single_for_device(
+                               priv->pci_dev, tbd->host_addr,
+                               tbd->buf_length,
+                               PCI_DMA_TODEVICE);
+
+                       txq->next++;
+                       txq->next %= txq->entries;
+                }
+
+               txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
+               SET_STAT(&priv->txq_stat, txq->available);
+
+               list_add_tail(element, &priv->fw_pend_list);
+               INC_STAT(&priv->fw_pend_stat);
+       }
+
+       if (txq->next != next) {
+               /* kick off the DMA by notifying firmware the
+                * write index has moved; make sure TBD stores are sync'd */
+               write_register(priv->net_dev,
+                              IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
+                              txq->next);
+       }
+        return;
+}
+
+static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
+{
+       struct net_device *dev = priv->net_dev;
+       unsigned long flags;
+       u32 inta, tmp;
+
+       spin_lock_irqsave(&priv->low_lock, flags);
+       ipw2100_disable_interrupts(priv);
+
+       read_register(dev, IPW_REG_INTA, &inta);
+
+       IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
+                     (unsigned long)inta & IPW_INTERRUPT_MASK);
+
+       priv->in_isr++;
+       priv->interrupts++;
+
+       /* We do not loop and keep polling for more interrupts as this
+        * is frowned upon and doesn't play nicely with other potentially
+        * chained IRQs */
+       IPW_DEBUG_ISR("INTA: 0x%08lX\n",
+                     (unsigned long)inta & IPW_INTERRUPT_MASK);
+
+       if (inta & IPW2100_INTA_FATAL_ERROR) {
+               IPW_DEBUG_WARNING(DRV_NAME
+                                 ": Fatal interrupt. Scheduling firmware restart.\n");
+               priv->inta_other++;
+               write_register(
+                       dev, IPW_REG_INTA,
+                       IPW2100_INTA_FATAL_ERROR);
+
+               read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
+               IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
+                              priv->net_dev->name, priv->fatal_error);
+
+               read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
+               IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
+                              priv->net_dev->name, tmp);
+
+               /* Wake up any sleeping jobs */
+               schedule_reset(priv);
+       }
+
+       if (inta & IPW2100_INTA_PARITY_ERROR) {
+               IPW_DEBUG_ERROR("***** PARITY ERROR INTERRUPT !!!! \n");
+               priv->inta_other++;
+               write_register(
+                       dev, IPW_REG_INTA,
+                       IPW2100_INTA_PARITY_ERROR);
+       }
+
+       if (inta & IPW2100_INTA_RX_TRANSFER) {
+               IPW_DEBUG_ISR("RX interrupt\n");
+
+               priv->rx_interrupts++;
+
+               write_register(
+                       dev, IPW_REG_INTA,
+                       IPW2100_INTA_RX_TRANSFER);
+
+               __ipw2100_rx_process(priv);
+               __ipw2100_tx_complete(priv);
+       }
+
+       if (inta & IPW2100_INTA_TX_TRANSFER) {
+               IPW_DEBUG_ISR("TX interrupt\n");
+
+               priv->tx_interrupts++;
+
+               write_register(dev, IPW_REG_INTA,
+                              IPW2100_INTA_TX_TRANSFER);
+
+               __ipw2100_tx_complete(priv);
+               X__ipw2100_tx_send_commands(priv);
+               X__ipw2100_tx_send_data(priv);
+       }
+
+       if (inta & IPW2100_INTA_TX_COMPLETE) {
+               IPW_DEBUG_ISR("TX complete\n");
+               priv->inta_other++;
+               write_register(
+                       dev, IPW_REG_INTA,
+                       IPW2100_INTA_TX_COMPLETE);
+
+               __ipw2100_tx_complete(priv);
+       }
+
+       if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
+               /* ipw2100_handle_event(dev); */
+               priv->inta_other++;
+               write_register(
+                       dev, IPW_REG_INTA,
+                       IPW2100_INTA_EVENT_INTERRUPT);
+       }
+
+       if (inta & IPW2100_INTA_FW_INIT_DONE) {
+               IPW_DEBUG_ISR("FW init done interrupt\n");
+               priv->inta_other++;
+
+               read_register(dev, IPW_REG_INTA, &tmp);
+               if (tmp & (IPW2100_INTA_FATAL_ERROR |
+                          IPW2100_INTA_PARITY_ERROR)) {
+                       write_register(
+                               dev, IPW_REG_INTA,
+                               IPW2100_INTA_FATAL_ERROR |
+                               IPW2100_INTA_PARITY_ERROR);
+               }
+
+               write_register(dev, IPW_REG_INTA,
+                              IPW2100_INTA_FW_INIT_DONE);
+       }
+
+       if (inta & IPW2100_INTA_STATUS_CHANGE) {
+               IPW_DEBUG_ISR("Status change interrupt\n");
+               priv->inta_other++;
+               write_register(
+                       dev, IPW_REG_INTA,
+                       IPW2100_INTA_STATUS_CHANGE);
+       }
+
+       if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
+               IPW_DEBUG_ISR("slave host mode interrupt\n");
+               priv->inta_other++;
+               write_register(
+                       dev, IPW_REG_INTA,
+                       IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
+       }
+
+       priv->in_isr--;
+       ipw2100_enable_interrupts(priv);
+
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+       IPW_DEBUG_ISR("exit\n");
+}
+
+
+static irqreturn_t ipw2100_interrupt(int irq, void *data,
+                                    struct pt_regs *regs)
+{
+       struct ipw2100_priv *priv = data;
+       u32 inta, inta_mask;
+
+       if (!data)
+               return IRQ_NONE;
+
+       spin_lock(&priv->low_lock);
+
+       /* We check to see if we should be ignoring interrupts before
+        * we touch the hardware.  During ucode load if we try and handle
+        * an interrupt we can cause keyboard problems as well as cause
+        * the ucode to fail to initialize */
+       if (!(priv->status & STATUS_INT_ENABLED)) {
+               /* Shared IRQ */
+               goto none;
+       }
+
+       read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
+       read_register(priv->net_dev, IPW_REG_INTA, &inta);
+
+       if (inta == 0xFFFFFFFF) {
+               /* Hardware disappeared */
+               IPW_DEBUG_WARNING("IRQ INTA == 0xFFFFFFFF\n");
+               goto none;
+       }
+
+       inta &= IPW_INTERRUPT_MASK;
+
+       if (!(inta & inta_mask)) {
+               /* Shared interrupt */
+               goto none;
+       }
+
+       /* We disable the hardware interrupt here just to prevent unneeded
+        * calls to be made.  We disable this again within the actual
+        * work tasklet, so if another part of the code re-enables the
+        * interrupt, that is fine */
+       ipw2100_disable_interrupts(priv);
+
+       tasklet_schedule(&priv->irq_tasklet);
+       spin_unlock(&priv->low_lock);
+
+       return IRQ_HANDLED;
+ none:
+       spin_unlock(&priv->low_lock);
+       return IRQ_NONE;
+}
+
+static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       struct list_head *element;
+       struct ipw2100_tx_packet *packet;
+       unsigned long flags;
+
+       spin_lock_irqsave(&priv->low_lock, flags);
+
+       if (!(priv->status & STATUS_ASSOCIATED)) {
+               IPW_DEBUG_INFO("Can not transmit when not connected.\n");
+               priv->ieee->stats.tx_carrier_errors++;
+               netif_stop_queue(dev);
+               goto fail_unlock;
+       }
+
+       if (list_empty(&priv->tx_free_list))
+               goto fail_unlock;
+
+       element = priv->tx_free_list.next;
+       packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+       packet->info.d_struct.txb = txb;
+
+       IPW_DEBUG_TX("Sending fragment (%d bytes):\n",
+                        txb->fragments[0]->len);
+       printk_buf(IPW_DL_TX, txb->fragments[0]->data,
+                  txb->fragments[0]->len);
+
+       packet->jiffy_start = jiffies;
+
+       list_del(element);
+       DEC_STAT(&priv->tx_free_stat);
+
+       list_add_tail(element, &priv->tx_pend_list);
+       INC_STAT(&priv->tx_pend_stat);
+
+       X__ipw2100_tx_send_data(priv);
+
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+       return 0;
+
+ fail_unlock:
+       netif_stop_queue(dev);
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+       return 1;
+}
+
+
+static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
+{
+       int i, j, err = -EINVAL;
+       void *v;
+       dma_addr_t p;
+
+       priv->msg_buffers = (struct ipw2100_tx_packet *)kmalloc(
+               IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet),
+               GFP_KERNEL);
+       if (!priv->msg_buffers) {
+               IPW_DEBUG_ERROR("%s: PCI alloc failed for msg "
+                      "buffers.\n", priv->net_dev->name);
+               return -ENOMEM;
+       }
+
+       for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
+               v = pci_alloc_consistent(
+                       priv->pci_dev,
+                       sizeof(struct ipw2100_cmd_header),
+                       &p);
+               if (!v) {
+                       IPW_DEBUG_ERROR(
+                              "%s: PCI alloc failed for msg "
+                              "buffers.\n",
+                              priv->net_dev->name);
+                       err = -ENOMEM;
+                       break;
+               }
+
+               memset(v, 0, sizeof(struct ipw2100_cmd_header));
+
+               priv->msg_buffers[i].type = COMMAND;
+               priv->msg_buffers[i].info.c_struct.cmd =
+                       (struct ipw2100_cmd_header*)v;
+               priv->msg_buffers[i].info.c_struct.cmd_phys = p;
+       }
+
+       if (i == IPW_COMMAND_POOL_SIZE)
+               return 0;
+
+       for (j = 0; j < i; j++) {
+               pci_free_consistent(
+                       priv->pci_dev,
+                       sizeof(struct ipw2100_cmd_header),
+                       priv->msg_buffers[j].info.c_struct.cmd,
+                       priv->msg_buffers[j].info.c_struct.cmd_phys);
+       }
+
+       kfree(priv->msg_buffers);
+       priv->msg_buffers = NULL;
+
+       return err;
+}
+
+static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
+{
+       int i;
+
+       INIT_LIST_HEAD(&priv->msg_free_list);
+       INIT_LIST_HEAD(&priv->msg_pend_list);
+
+       for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
+               list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
+       SET_STAT(&priv->msg_free_stat, i);
+
+       return 0;
+}
+
+static void ipw2100_msg_free(struct ipw2100_priv *priv)
+{
+       int i;
+
+       if (!priv->msg_buffers)
+               return;
+
+       for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
+               pci_free_consistent(priv->pci_dev,
+                                   sizeof(struct ipw2100_cmd_header),
+                                   priv->msg_buffers[i].info.c_struct.cmd,
+                                   priv->msg_buffers[i].info.c_struct.cmd_phys);
+       }
+
+       kfree(priv->msg_buffers);
+       priv->msg_buffers = NULL;
+}
+
+static ssize_t show_pci(struct device *d, char *buf)
+{
+       struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
+       char *out = buf;
+       int i, j;
+       u32 val;
+
+       for (i = 0; i < 16; i++) {
+               out += sprintf(out, "[%08X] ", i * 16);
+               for (j = 0; j < 16; j += 4) {
+                       pci_read_config_dword(pci_dev, i * 16 + j, &val);
+                       out += sprintf(out, "%08X ", val);
+               }
+               out += sprintf(out, "\n");
+       }
+
+       return out - buf;
+}
+static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
+
+static ssize_t show_cfg(struct device *d, char *buf)
+{
+       struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+       return sprintf(buf, "0x%08x\n", (int)p->config);
+}
+static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
+
+static ssize_t show_status(struct device *d, char *buf)
+{
+       struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+       return sprintf(buf, "0x%08x\n", (int)p->status);
+}
+static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
+
+static ssize_t show_capability(struct device *d, char *buf)
+{
+       struct ipw2100_priv *p = (struct ipw2100_priv *)d->driver_data;
+       return sprintf(buf, "0x%08x\n", (int)p->capability);
+}
+static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
+
+
+#define IPW2100_REG(x) { IPW_ ##x, #x }
+const struct {
+       u32 addr;
+       const char *name;
+} hw_data[] = {
+       IPW2100_REG(REG_GP_CNTRL),
+       IPW2100_REG(REG_GPIO),
+       IPW2100_REG(REG_INTA),
+       IPW2100_REG(REG_INTA_MASK),
+       IPW2100_REG(REG_RESET_REG),
+};
+#define IPW2100_NIC(x, s) { x, #x, s }
+const struct {
+       u32 addr;
+       const char *name;
+       size_t size;
+} nic_data[] = {
+       IPW2100_NIC(IPW2100_CONTROL_REG, 2),
+       IPW2100_NIC(0x210014, 1),
+       IPW2100_NIC(0x210000, 1),
+};
+#define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
+const struct {
+       u8 index;
+       const char *name;
+       const char *desc;
+} ord_data[] = {
+       IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
+       IPW2100_ORD(STAT_TX_HOST_COMPLETE, "successful Host Tx's (MSDU)"),
+       IPW2100_ORD(STAT_TX_DIR_DATA,      "successful Directed Tx's (MSDU)"),
+       IPW2100_ORD(STAT_TX_DIR_DATA1,     "successful Directed Tx's (MSDU) @ 1MB"),
+       IPW2100_ORD(STAT_TX_DIR_DATA2,     "successful Directed Tx's (MSDU) @ 2MB"),
+       IPW2100_ORD(STAT_TX_DIR_DATA5_5,   "successful Directed Tx's (MSDU) @ 5_5MB"),
+       IPW2100_ORD(STAT_TX_DIR_DATA11,    "successful Directed Tx's (MSDU) @ 11MB"),
+       IPW2100_ORD(STAT_TX_NODIR_DATA1,   "successful Non_Directed Tx's (MSDU) @ 1MB"),
+       IPW2100_ORD(STAT_TX_NODIR_DATA2,   "successful Non_Directed Tx's (MSDU) @ 2MB"),
+       IPW2100_ORD(STAT_TX_NODIR_DATA5_5, "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
+       IPW2100_ORD(STAT_TX_NODIR_DATA11,  "successful Non_Directed Tx's (MSDU) @ 11MB"),
+       IPW2100_ORD(STAT_NULL_DATA,        "successful NULL data Tx's"),
+       IPW2100_ORD(STAT_TX_RTS,           "successful Tx RTS"),
+       IPW2100_ORD(STAT_TX_CTS,           "successful Tx CTS"),
+       IPW2100_ORD(STAT_TX_ACK,           "successful Tx ACK"),
+       IPW2100_ORD(STAT_TX_ASSN,          "successful Association Tx's"),
+       IPW2100_ORD(STAT_TX_ASSN_RESP,     "successful Association response Tx's"),
+       IPW2100_ORD(STAT_TX_REASSN,        "successful Reassociation Tx's"),
+       IPW2100_ORD(STAT_TX_REASSN_RESP,   "successful Reassociation response Tx's"),
+       IPW2100_ORD(STAT_TX_PROBE,         "probes successfully transmitted"),
+       IPW2100_ORD(STAT_TX_PROBE_RESP,    "probe responses successfully transmitted"),
+       IPW2100_ORD(STAT_TX_BEACON,        "tx beacon"),
+       IPW2100_ORD(STAT_TX_ATIM,          "Tx ATIM"),
+       IPW2100_ORD(STAT_TX_DISASSN,       "successful Disassociation TX"),
+       IPW2100_ORD(STAT_TX_AUTH,          "successful Authentication Tx"),
+       IPW2100_ORD(STAT_TX_DEAUTH,        "successful Deauthentication TX"),
+       IPW2100_ORD(STAT_TX_TOTAL_BYTES,   "Total successful Tx data bytes"),
+       IPW2100_ORD(STAT_TX_RETRIES,       "Tx retries"),
+       IPW2100_ORD(STAT_TX_RETRY1,        "Tx retries at 1MBPS"),
+       IPW2100_ORD(STAT_TX_RETRY2,        "Tx retries at 2MBPS"),
+       IPW2100_ORD(STAT_TX_RETRY5_5,      "Tx retries at 5.5MBPS"),
+       IPW2100_ORD(STAT_TX_RETRY11,       "Tx retries at 11MBPS"),
+       IPW2100_ORD(STAT_TX_FAILURES,      "Tx Failures"),
+       IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,"times max tries in a hop failed"),
+       IPW2100_ORD(STAT_TX_DISASSN_FAIL,       "times disassociation failed"),
+       IPW2100_ORD(STAT_TX_ERR_CTS,         "missed/bad CTS frames"),
+       IPW2100_ORD(STAT_TX_ERR_ACK,    "tx err due to acks"),
+       IPW2100_ORD(STAT_RX_HOST,       "packets passed to host"),
+       IPW2100_ORD(STAT_RX_DIR_DATA,   "directed packets"),
+       IPW2100_ORD(STAT_RX_DIR_DATA1,  "directed packets at 1MB"),
+       IPW2100_ORD(STAT_RX_DIR_DATA2,  "directed packets at 2MB"),
+       IPW2100_ORD(STAT_RX_DIR_DATA5_5,        "directed packets at 5.5MB"),
+       IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
+       IPW2100_ORD(STAT_RX_NODIR_DATA,"nondirected packets"),
+       IPW2100_ORD(STAT_RX_NODIR_DATA1,        "nondirected packets at 1MB"),
+       IPW2100_ORD(STAT_RX_NODIR_DATA2,        "nondirected packets at 2MB"),
+       IPW2100_ORD(STAT_RX_NODIR_DATA5_5,      "nondirected packets at 5.5MB"),
+       IPW2100_ORD(STAT_RX_NODIR_DATA11,       "nondirected packets at 11MB"),
+       IPW2100_ORD(STAT_RX_NULL_DATA,  "null data rx's"),
+       IPW2100_ORD(STAT_RX_RTS,        "Rx RTS"),
+       IPW2100_ORD(STAT_RX_CTS,        "Rx CTS"),
+       IPW2100_ORD(STAT_RX_ACK,        "Rx ACK"),
+       IPW2100_ORD(STAT_RX_CFEND,      "Rx CF End"),
+       IPW2100_ORD(STAT_RX_CFEND_ACK,  "Rx CF End + CF Ack"),
+       IPW2100_ORD(STAT_RX_ASSN,       "Association Rx's"),
+       IPW2100_ORD(STAT_RX_ASSN_RESP,  "Association response Rx's"),
+       IPW2100_ORD(STAT_RX_REASSN,     "Reassociation Rx's"),
+       IPW2100_ORD(STAT_RX_REASSN_RESP,        "Reassociation response Rx's"),
+       IPW2100_ORD(STAT_RX_PROBE,      "probe Rx's"),
+       IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
+       IPW2100_ORD(STAT_RX_BEACON,     "Rx beacon"),
+       IPW2100_ORD(STAT_RX_ATIM,       "Rx ATIM"),
+       IPW2100_ORD(STAT_RX_DISASSN,    "disassociation Rx"),
+       IPW2100_ORD(STAT_RX_AUTH,       "authentication Rx"),
+       IPW2100_ORD(STAT_RX_DEAUTH,     "deauthentication Rx"),
+       IPW2100_ORD(STAT_RX_TOTAL_BYTES,"Total rx data bytes received"),
+       IPW2100_ORD(STAT_RX_ERR_CRC,     "packets with Rx CRC error"),
+       IPW2100_ORD(STAT_RX_ERR_CRC1,    "Rx CRC errors at 1MB"),
+       IPW2100_ORD(STAT_RX_ERR_CRC2,    "Rx CRC errors at 2MB"),
+       IPW2100_ORD(STAT_RX_ERR_CRC5_5,  "Rx CRC errors at 5.5MB"),
+       IPW2100_ORD(STAT_RX_ERR_CRC11,   "Rx CRC errors at 11MB"),
+       IPW2100_ORD(STAT_RX_DUPLICATE1, "duplicate rx packets at 1MB"),
+       IPW2100_ORD(STAT_RX_DUPLICATE2,  "duplicate rx packets at 2MB"),
+       IPW2100_ORD(STAT_RX_DUPLICATE5_5,        "duplicate rx packets at 5.5MB"),
+       IPW2100_ORD(STAT_RX_DUPLICATE11,         "duplicate rx packets at 11MB"),
+       IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
+       IPW2100_ORD(PERS_DB_LOCK,       "locking fw permanent  db"),
+       IPW2100_ORD(PERS_DB_SIZE,       "size of fw permanent  db"),
+       IPW2100_ORD(PERS_DB_ADDR,       "address of fw permanent  db"),
+       IPW2100_ORD(STAT_RX_INVALID_PROTOCOL,   "rx frames with invalid protocol"),
+       IPW2100_ORD(SYS_BOOT_TIME,      "Boot time"),
+       IPW2100_ORD(STAT_RX_NO_BUFFER,  "rx frames rejected due to no buffer"),
+       IPW2100_ORD(STAT_RX_MISSING_FRAG,       "rx frames dropped due to missing fragment"),
+       IPW2100_ORD(STAT_RX_ORPHAN_FRAG,        "rx frames dropped due to non-sequential fragment"),
+       IPW2100_ORD(STAT_RX_ORPHAN_FRAME,       "rx frames dropped due to unmatched 1st frame"),
+       IPW2100_ORD(STAT_RX_FRAG_AGEOUT,        "rx frames dropped due to uncompleted frame"),
+       IPW2100_ORD(STAT_RX_ICV_ERRORS, "ICV errors during decryption"),
+       IPW2100_ORD(STAT_PSP_SUSPENSION,"times adapter suspended"),
+       IPW2100_ORD(STAT_PSP_BCN_TIMEOUT,       "beacon timeout"),
+       IPW2100_ORD(STAT_PSP_POLL_TIMEOUT,      "poll response timeouts"),
+       IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, "timeouts waiting for last {broad,multi}cast pkt"),
+       IPW2100_ORD(STAT_PSP_RX_DTIMS,  "PSP DTIMs received"),
+       IPW2100_ORD(STAT_PSP_RX_TIMS,   "PSP TIMs received"),
+       IPW2100_ORD(STAT_PSP_STATION_ID,"PSP Station ID"),
+       IPW2100_ORD(LAST_ASSN_TIME,     "RTC time of last association"),
+       IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,"current calculation of % missed beacons"),
+       IPW2100_ORD(STAT_PERCENT_RETRIES,"current calculation of % missed tx retries"),
+       IPW2100_ORD(ASSOCIATED_AP_PTR,  "0 if not associated, else pointer to AP table entry"),
+       IPW2100_ORD(AVAILABLE_AP_CNT,   "AP's decsribed in the AP table"),
+       IPW2100_ORD(AP_LIST_PTR,        "Ptr to list of available APs"),
+       IPW2100_ORD(STAT_AP_ASSNS,      "associations"),
+       IPW2100_ORD(STAT_ASSN_FAIL,     "association failures"),
+       IPW2100_ORD(STAT_ASSN_RESP_FAIL,"failures due to response fail"),
+       IPW2100_ORD(STAT_FULL_SCANS,    "full scans"),
+       IPW2100_ORD(CARD_DISABLED,      "Card Disabled"),
+       IPW2100_ORD(STAT_ROAM_INHIBIT,  "times roaming was inhibited due to activity"),
+       IPW2100_ORD(RSSI_AT_ASSN,       "RSSI of associated AP at time of association"),
+       IPW2100_ORD(STAT_ASSN_CAUSE1,   "reassociation: no probe response or TX on hop"),
+       IPW2100_ORD(STAT_ASSN_CAUSE2,   "reassociation: poor tx/rx quality"),
+       IPW2100_ORD(STAT_ASSN_CAUSE3,   "reassociation: tx/rx quality (excessive AP load"),
+       IPW2100_ORD(STAT_ASSN_CAUSE4,   "reassociation: AP RSSI level"),
+       IPW2100_ORD(STAT_ASSN_CAUSE5,   "reassociations due to load leveling"),
+       IPW2100_ORD(STAT_AUTH_FAIL,     "times authentication failed"),
+       IPW2100_ORD(STAT_AUTH_RESP_FAIL,"times authentication response failed"),
+       IPW2100_ORD(STATION_TABLE_CNT,  "entries in association table"),
+       IPW2100_ORD(RSSI_AVG_CURR,      "Current avg RSSI"),
+       IPW2100_ORD(POWER_MGMT_MODE,    "Power mode - 0=CAM, 1=PSP"),
+       IPW2100_ORD(COUNTRY_CODE,       "IEEE country code as recv'd from beacon"),
+       IPW2100_ORD(COUNTRY_CHANNELS,   "channels suported by country"),
+       IPW2100_ORD(RESET_CNT,  "adapter resets (warm)"),
+       IPW2100_ORD(BEACON_INTERVAL,    "Beacon interval"),
+       IPW2100_ORD(ANTENNA_DIVERSITY,  "TRUE if antenna diversity is disabled"),
+       IPW2100_ORD(DTIM_PERIOD,        "beacon intervals between DTIMs"),
+       IPW2100_ORD(OUR_FREQ,   "current radio freq lower digits - channel ID"),
+       IPW2100_ORD(RTC_TIME,   "current RTC time"),
+       IPW2100_ORD(PORT_TYPE,  "operating mode"),
+       IPW2100_ORD(CURRENT_TX_RATE,    "current tx rate"),
+       IPW2100_ORD(SUPPORTED_RATES,    "supported tx rates"),
+       IPW2100_ORD(ATIM_WINDOW,        "current ATIM Window"),
+       IPW2100_ORD(BASIC_RATES,        "basic tx rates"),
+       IPW2100_ORD(NIC_HIGHEST_RATE,   "NIC highest tx rate"),
+       IPW2100_ORD(AP_HIGHEST_RATE,    "AP highest tx rate"),
+       IPW2100_ORD(CAPABILITIES,       "Management frame capability field"),
+       IPW2100_ORD(AUTH_TYPE,  "Type of authentication"),
+       IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
+       IPW2100_ORD(RTS_THRESHOLD,      "Min packet length for RTS handshaking"),
+       IPW2100_ORD(INT_MODE,   "International mode"),
+       IPW2100_ORD(FRAGMENTATION_THRESHOLD,    "protocol frag threshold"),
+       IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, "EEPROM offset in SRAM"),
+       IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE,  "EEPROM size in SRAM"),
+       IPW2100_ORD(EEPROM_SKU_CAPABILITY,      "EEPROM SKU Capability"),
+       IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS,   "EEPROM IBSS 11b channel set"),
+       IPW2100_ORD(MAC_VERSION,        "MAC Version"),
+       IPW2100_ORD(MAC_REVISION,       "MAC Revision"),
+       IPW2100_ORD(RADIO_VERSION,      "Radio Version"),
+       IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
+       IPW2100_ORD(UCODE_VERSION,      "Ucode Version"),
+};
+
+
+static ssize_t show_registers(struct device *d, char *buf)
+{
+       int i;
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       struct net_device *dev = priv->net_dev;
+       char * out = buf;
+       u32 val = 0;
+
+       out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
+
+       for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) {
+               read_register(dev, hw_data[i].addr, &val);
+               out += sprintf(out, "%30s [%08X] : %08X\n",
+                              hw_data[i].name, hw_data[i].addr, val);
+       }
+
+       return out - buf;
+}
+static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
+
+
+static ssize_t show_hardware(struct device *d, char *buf)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       struct net_device *dev = priv->net_dev;
+       char * out = buf;
+       int i;
+
+       out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
+
+       for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) {
+               u8 tmp8;
+               u16 tmp16;
+               u32 tmp32;
+
+               switch (nic_data[i].size) {
+               case 1:
+                       read_nic_byte(dev, nic_data[i].addr, &tmp8);
+                       out += sprintf(out, "%30s [%08X] : %02X\n",
+                                      nic_data[i].name, nic_data[i].addr,
+                                      tmp8);
+                       break;
+               case 2:
+                       read_nic_word(dev, nic_data[i].addr, &tmp16);
+                       out += sprintf(out, "%30s [%08X] : %04X\n",
+                                      nic_data[i].name, nic_data[i].addr,
+                                      tmp16);
+                       break;
+               case 4:
+                       read_nic_dword(dev, nic_data[i].addr, &tmp32);
+                       out += sprintf(out, "%30s [%08X] : %08X\n",
+                                      nic_data[i].name, nic_data[i].addr,
+                                      tmp32);
+                       break;
+               }
+       }
+       return out - buf;
+}
+static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
+
+
+static ssize_t show_memory(struct device *d, char *buf)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       struct net_device *dev = priv->net_dev;
+       static unsigned long loop = 0;
+       int len = 0;
+       u32 buffer[4];
+       int i;
+       char line[81];
+
+       if (loop >= 0x30000)
+               loop = 0;
+
+       /* sysfs provides us PAGE_SIZE buffer */
+       while (len < PAGE_SIZE - 128 && loop < 0x30000) {
+
+               if (priv->snapshot[0]) for (i = 0; i < 4; i++)
+                       buffer[i] = *(u32 *)SNAPSHOT_ADDR(loop + i * 4);
+               else for (i = 0; i < 4; i++)
+                       read_nic_dword(dev, loop + i * 4, &buffer[i]);
+
+               if (priv->dump_raw)
+                       len += sprintf(buf + len,
+                                      "%c%c%c%c"
+                                      "%c%c%c%c"
+                                      "%c%c%c%c"
+                                      "%c%c%c%c",
+                                      ((u8*)buffer)[0x0],
+                                      ((u8*)buffer)[0x1],
+                                      ((u8*)buffer)[0x2],
+                                      ((u8*)buffer)[0x3],
+                                      ((u8*)buffer)[0x4],
+                                      ((u8*)buffer)[0x5],
+                                      ((u8*)buffer)[0x6],
+                                      ((u8*)buffer)[0x7],
+                                      ((u8*)buffer)[0x8],
+                                      ((u8*)buffer)[0x9],
+                                      ((u8*)buffer)[0xa],
+                                      ((u8*)buffer)[0xb],
+                                      ((u8*)buffer)[0xc],
+                                      ((u8*)buffer)[0xd],
+                                      ((u8*)buffer)[0xe],
+                                      ((u8*)buffer)[0xf]);
+               else
+                       len += sprintf(buf + len, "%s\n",
+                                      snprint_line(line, sizeof(line),
+                                                   (u8*)buffer, 16, loop));
+               loop += 16;
+       }
+
+       return len;
+}
+
+static ssize_t store_memory(struct device *d, const char *buf, size_t count)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       struct net_device *dev = priv->net_dev;
+       const char *p = buf;
+
+       if (count < 1)
+               return count;
+
+       if (p[0] == '1' ||
+           (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
+               IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
+                      dev->name);
+               priv->dump_raw = 1;
+
+       } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
+                                 tolower(p[1]) == 'f')) {
+               IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
+                      dev->name);
+               priv->dump_raw = 0;
+
+       } else if (tolower(p[0]) == 'r') {
+               IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n",
+                      dev->name);
+               ipw2100_snapshot_free(priv);
+
+       } else
+               IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
+                      "reset = clear memory snapshot\n",
+                      dev->name);
+
+       return count;
+}
+static DEVICE_ATTR(memory, S_IWUSR|S_IRUGO, show_memory, store_memory);
+
+
+static ssize_t show_ordinals(struct device *d, char *buf)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       u32 val = 0;
+       int len = 0;
+       u32 val_len;
+       static int loop = 0;
+
+       if (loop >= sizeof(ord_data) / sizeof(*ord_data))
+               loop = 0;
+
+       /* sysfs provides us PAGE_SIZE buffer */
+       while (len < PAGE_SIZE - 128 &&
+              loop < (sizeof(ord_data) / sizeof(*ord_data))) {
+
+               val_len = sizeof(u32);
+
+               if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
+                                       &val_len))
+                       len += sprintf(buf + len, "[0x%02X] = ERROR    %s\n",
+                                      ord_data[loop].index,
+                                      ord_data[loop].desc);
+               else
+                       len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
+                                      ord_data[loop].index, val,
+                                      ord_data[loop].desc);
+               loop++;
+       }
+
+       return len;
+}
+static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
+
+
+static ssize_t show_stats(struct device *d, char *buf)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       char * out = buf;
+
+       out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
+                      priv->interrupts, priv->tx_interrupts,
+                      priv->rx_interrupts, priv->inta_other);
+       out += sprintf(out, "firmware resets: %d\n", priv->resets);
+       out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
+#ifdef CONFIG_IPW_DEBUG
+       out += sprintf(out, "packet mismatch image: %s\n",
+                      priv->snapshot[0] ? "YES" : "NO");
+#endif
+
+       return out - buf;
+}
+static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
+
+
+int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
+{
+       int err;
+
+       if (mode == priv->ieee->iw_mode)
+               return 0;
+
+       err = ipw2100_disable_adapter(priv);
+       if (err) {
+               IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+                      priv->net_dev->name, err);
+               return err;
+       }
+
+       switch (mode) {
+       case IW_MODE_INFRA:
+               priv->net_dev->type = ARPHRD_ETHER;
+               break;
+       case IW_MODE_ADHOC:
+               priv->net_dev->type = ARPHRD_ETHER;
+               break;
+#ifdef CONFIG_IPW2100_MONITOR
+       case IW_MODE_MONITOR:
+               priv->last_mode = priv->ieee->iw_mode;
+               priv->net_dev->type = ARPHRD_IEEE80211;
+               break;
+#endif /* CONFIG_IPW2100_MONITOR */
+       }
+
+       priv->ieee->iw_mode = mode;
+
+#ifdef CONFIG_PM
+        /* Indicate ipw2100_download_firmware download firmware
+        * from disk instead of memory. */
+       ipw2100_firmware.version = 0;
+#endif
+
+       printk(KERN_INFO "%s: Reseting on mode change.\n",
+               priv->net_dev->name);
+       priv->reset_backoff = 0;
+       schedule_reset(priv);
+
+       return 0;
+}
+
+static ssize_t show_internals(struct device *d, char *buf)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       int len = 0;
+
+#define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" # y "\n", priv-> x)
+
+       if (priv->status & STATUS_ASSOCIATED)
+               len += sprintf(buf + len, "connected: %lu\n",
+                              get_seconds() - priv->connect_start);
+       else
+               len += sprintf(buf + len, "not connected\n");
+
+       DUMP_VAR(ieee->crypt[priv->ieee->tx_keyidx], p);
+       DUMP_VAR(status, 08lx);
+       DUMP_VAR(config, 08lx);
+       DUMP_VAR(capability, 08lx);
+
+       len += sprintf(buf + len, "last_rtc: %lu\n", (unsigned long)priv->last_rtc);
+
+       DUMP_VAR(fatal_error, d);
+       DUMP_VAR(stop_hang_check, d);
+       DUMP_VAR(stop_rf_kill, d);
+       DUMP_VAR(messages_sent, d);
+
+       DUMP_VAR(tx_pend_stat.value, d);
+       DUMP_VAR(tx_pend_stat.hi, d);
+
+       DUMP_VAR(tx_free_stat.value, d);
+       DUMP_VAR(tx_free_stat.lo, d);
+
+       DUMP_VAR(msg_free_stat.value, d);
+       DUMP_VAR(msg_free_stat.lo, d);
+
+       DUMP_VAR(msg_pend_stat.value, d);
+       DUMP_VAR(msg_pend_stat.hi, d);
+
+       DUMP_VAR(fw_pend_stat.value, d);
+       DUMP_VAR(fw_pend_stat.hi, d);
+
+       DUMP_VAR(txq_stat.value, d);
+       DUMP_VAR(txq_stat.lo, d);
+
+       DUMP_VAR(ieee->scans, d);
+       DUMP_VAR(reset_backoff, d);
+
+       return len;
+}
+static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
+
+
+static ssize_t show_bssinfo(struct device *d, char *buf)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       char essid[IW_ESSID_MAX_SIZE + 1];
+       u8 bssid[ETH_ALEN];
+       u32 chan = 0;
+       char * out = buf;
+       int length;
+       int ret;
+
+       memset(essid, 0, sizeof(essid));
+       memset(bssid, 0, sizeof(bssid));
+
+       length = IW_ESSID_MAX_SIZE;
+       ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
+       if (ret)
+               IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+                              __LINE__);
+
+       length = sizeof(bssid);
+       ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
+                                 bssid, &length);
+       if (ret)
+               IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+                              __LINE__);
+
+       length = sizeof(u32);
+       ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
+       if (ret)
+               IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
+                              __LINE__);
+
+       out += sprintf(out, "ESSID: %s\n", essid);
+       out += sprintf(out, "BSSID:   %02x:%02x:%02x:%02x:%02x:%02x\n",
+                      bssid[0], bssid[1], bssid[2],
+                      bssid[3], bssid[4], bssid[5]);
+       out += sprintf(out, "Channel: %d\n", chan);
+
+       return out - buf;
+}
+static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
+
+
+
+
+#ifdef CONFIG_IPW_DEBUG
+static ssize_t show_debug_level(struct device_driver *d, char *buf)
+{
+       return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
+}
+
+static ssize_t store_debug_level(struct device_driver *d, const char *buf,
+                                size_t count)
+{
+       char *p = (char *)buf;
+       u32 val;
+
+       if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+               p++;
+               if (p[0] == 'x' || p[0] == 'X')
+                       p++;
+               val = simple_strtoul(p, &p, 16);
+       } else
+               val = simple_strtoul(p, &p, 10);
+       if (p == buf)
+               IPW_DEBUG_INFO(DRV_NAME
+                      ": %s is not in hex or decimal form.\n", buf);
+       else
+               ipw2100_debug_level = val;
+
+       return strnlen(buf, count);
+}
+static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
+                  store_debug_level);
+#endif /* CONFIG_IPW_DEBUG */
+
+
+static ssize_t show_fatal_error(struct device *d, char *buf)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       char *out = buf;
+       int i;
+
+       if (priv->fatal_error)
+               out += sprintf(out, "0x%08X\n",
+                              priv->fatal_error);
+       else
+               out += sprintf(out, "0\n");
+
+       for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
+               if (!priv->fatal_errors[(priv->fatal_index - i) %
+                                       IPW2100_ERROR_QUEUE])
+                       continue;
+
+               out += sprintf(out, "%d. 0x%08X\n", i,
+                              priv->fatal_errors[(priv->fatal_index - i) %
+                                                 IPW2100_ERROR_QUEUE]);
+       }
+
+       return out - buf;
+}
+
+static ssize_t store_fatal_error(struct device *d, const char *buf,
+                                size_t count)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       schedule_reset(priv);
+       return count;
+}
+static DEVICE_ATTR(fatal_error, S_IWUSR|S_IRUGO, show_fatal_error, store_fatal_error);
+
+
+static ssize_t show_scan_age(struct device *d, char *buf)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       return sprintf(buf, "%d\n", priv->ieee->scan_age);
+}
+
+static ssize_t store_scan_age(struct device *d, const char *buf, size_t count)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       struct net_device *dev = priv->net_dev;
+       char buffer[] = "00000000";
+       unsigned long len =
+           (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
+       unsigned long val;
+       char *p = buffer;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       strncpy(buffer, buf, len);
+       buffer[len] = 0;
+
+       if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
+               p++;
+               if (p[0] == 'x' || p[0] == 'X')
+                       p++;
+               val = simple_strtoul(p, &p, 16);
+       } else
+               val = simple_strtoul(p, &p, 10);
+       if (p == buffer) {
+               IPW_DEBUG_INFO("%s: user supplied invalid value.\n",
+                      dev->name);
+       } else {
+               priv->ieee->scan_age = val;
+               IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
+       }
+
+       IPW_DEBUG_INFO("exit\n");
+       return len;
+}
+static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
+
+
+static ssize_t show_rf_kill(struct device *d, char *buf)
+{
+       /* 0 - RF kill not enabled
+          1 - SW based RF kill active (sysfs)
+          2 - HW based RF kill active
+          3 - Both HW and SW baed RF kill active */
+       struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
+       int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
+               (rf_kill_active(priv) ? 0x2 : 0x0);
+       return sprintf(buf, "%i\n", val);
+}
+
+static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
+{
+       if ((disable_radio ? 1 : 0) ==
+           (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
+               return 0 ;
+
+       IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO  %s\n",
+                         disable_radio ? "OFF" : "ON");
+
+       down(&priv->action_sem);
+
+       if (disable_radio) {
+               priv->status |= STATUS_RF_KILL_SW;
+               ipw2100_down(priv);
+       } else {
+               priv->status &= ~STATUS_RF_KILL_SW;
+               if (rf_kill_active(priv)) {
+                       IPW_DEBUG_RF_KILL("Can not turn radio back on - "
+                                         "disabled by HW switch\n");
+                       /* Make sure the RF_KILL check timer is running */
+                       priv->stop_rf_kill = 0;
+                       cancel_delayed_work(&priv->rf_kill);
+                       queue_delayed_work(priv->workqueue, &priv->rf_kill,
+                                          HZ);
+               } else
+                       schedule_reset(priv);
+       }
+
+       up(&priv->action_sem);
+       return 1;
+}
+
+static ssize_t store_rf_kill(struct device *d, const char *buf, size_t count)
+{
+       struct ipw2100_priv *priv = dev_get_drvdata(d);
+       ipw_radio_kill_sw(priv, buf[0] == '1');
+       return count;
+}
+static DEVICE_ATTR(rf_kill, S_IWUSR|S_IRUGO, show_rf_kill, store_rf_kill);
+
+
+static struct attribute *ipw2100_sysfs_entries[] = {
+       &dev_attr_hardware.attr,
+       &dev_attr_registers.attr,
+       &dev_attr_ordinals.attr,
+       &dev_attr_pci.attr,
+       &dev_attr_stats.attr,
+       &dev_attr_internals.attr,
+       &dev_attr_bssinfo.attr,
+       &dev_attr_memory.attr,
+       &dev_attr_scan_age.attr,
+       &dev_attr_fatal_error.attr,
+       &dev_attr_rf_kill.attr,
+       &dev_attr_cfg.attr,
+       &dev_attr_status.attr,
+       &dev_attr_capability.attr,
+       NULL,
+};
+
+static struct attribute_group ipw2100_attribute_group = {
+       .attrs = ipw2100_sysfs_entries,
+};
+
+
+static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
+{
+       struct ipw2100_status_queue *q = &priv->status_queue;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       q->size = entries * sizeof(struct ipw2100_status);
+       q->drv = (struct ipw2100_status *)pci_alloc_consistent(
+               priv->pci_dev, q->size, &q->nic);
+       if (!q->drv) {
+               IPW_DEBUG_WARNING(
+                      "Can not allocate status queue.\n");
+               return -ENOMEM;
+       }
+
+       memset(q->drv, 0, q->size);
+
+       IPW_DEBUG_INFO("exit\n");
+
+       return 0;
+}
+
+static void status_queue_free(struct ipw2100_priv *priv)
+{
+       IPW_DEBUG_INFO("enter\n");
+
+       if (priv->status_queue.drv) {
+               pci_free_consistent(
+                       priv->pci_dev, priv->status_queue.size,
+                       priv->status_queue.drv, priv->status_queue.nic);
+               priv->status_queue.drv = NULL;
+       }
+
+       IPW_DEBUG_INFO("exit\n");
+}
+
+static int bd_queue_allocate(struct ipw2100_priv *priv,
+                            struct ipw2100_bd_queue *q, int entries)
+{
+       IPW_DEBUG_INFO("enter\n");
+
+       memset(q, 0, sizeof(struct ipw2100_bd_queue));
+
+       q->entries = entries;
+       q->size = entries * sizeof(struct ipw2100_bd);
+       q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
+       if (!q->drv) {
+               IPW_DEBUG_INFO("can't allocate shared memory for buffer descriptors\n");
+               return -ENOMEM;
+       }
+       memset(q->drv, 0, q->size);
+
+       IPW_DEBUG_INFO("exit\n");
+
+       return 0;
+}
+
+static void bd_queue_free(struct ipw2100_priv *priv,
+                         struct ipw2100_bd_queue *q)
+{
+       IPW_DEBUG_INFO("enter\n");
+
+       if (!q)
+               return;
+
+       if (q->drv) {
+               pci_free_consistent(priv->pci_dev,
+                                   q->size, q->drv, q->nic);
+               q->drv = NULL;
+       }
+
+       IPW_DEBUG_INFO("exit\n");
+}
+
+static void bd_queue_initialize(
+       struct ipw2100_priv *priv, struct ipw2100_bd_queue * q,
+       u32 base, u32 size, u32 r, u32 w)
+{
+       IPW_DEBUG_INFO("enter\n");
+
+       IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv, q->nic);
+
+       write_register(priv->net_dev, base, q->nic);
+       write_register(priv->net_dev, size, q->entries);
+       write_register(priv->net_dev, r, q->oldest);
+       write_register(priv->net_dev, w, q->next);
+
+       IPW_DEBUG_INFO("exit\n");
+}
+
+static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
+{
+       if (priv->workqueue) {
+               priv->stop_rf_kill = 1;
+               priv->stop_hang_check = 1;
+               cancel_delayed_work(&priv->reset_work);
+               cancel_delayed_work(&priv->security_work);
+               cancel_delayed_work(&priv->wx_event_work);
+               cancel_delayed_work(&priv->hang_check);
+               cancel_delayed_work(&priv->rf_kill);
+               destroy_workqueue(priv->workqueue);
+               priv->workqueue = NULL;
+       }
+}
+
+static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
+{
+       int i, j, err = -EINVAL;
+       void *v;
+       dma_addr_t p;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
+       if (err) {
+               IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
+                      priv->net_dev->name);
+               return err;
+       }
+
+       priv->tx_buffers = (struct ipw2100_tx_packet *)kmalloc(
+               TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet),
+               GFP_ATOMIC);
+       if (!priv->tx_buffers) {
+               IPW_DEBUG_ERROR("%s: alloc failed form tx buffers.\n",
+                      priv->net_dev->name);
+               bd_queue_free(priv, &priv->tx_queue);
+               return -ENOMEM;
+       }
+
+       for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+               v = pci_alloc_consistent(
+                       priv->pci_dev, sizeof(struct ipw2100_data_header), &p);
+               if (!v) {
+                       IPW_DEBUG_ERROR("%s: PCI alloc failed for tx "
+                              "buffers.\n", priv->net_dev->name);
+                       err = -ENOMEM;
+                       break;
+               }
+
+               priv->tx_buffers[i].type = DATA;
+               priv->tx_buffers[i].info.d_struct.data = (struct ipw2100_data_header*)v;
+               priv->tx_buffers[i].info.d_struct.data_phys = p;
+               priv->tx_buffers[i].info.d_struct.txb = NULL;
+       }
+
+       if (i == TX_PENDED_QUEUE_LENGTH)
+               return 0;
+
+       for (j = 0; j < i; j++) {
+               pci_free_consistent(
+                       priv->pci_dev,
+                       sizeof(struct ipw2100_data_header),
+                       priv->tx_buffers[j].info.d_struct.data,
+                       priv->tx_buffers[j].info.d_struct.data_phys);
+       }
+
+       kfree(priv->tx_buffers);
+       priv->tx_buffers = NULL;
+
+       return err;
+}
+
+static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
+{
+       int i;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       /*
+        * reinitialize packet info lists
+        */
+       INIT_LIST_HEAD(&priv->fw_pend_list);
+       INIT_STAT(&priv->fw_pend_stat);
+
+       /*
+        * reinitialize lists
+        */
+       INIT_LIST_HEAD(&priv->tx_pend_list);
+       INIT_LIST_HEAD(&priv->tx_free_list);
+       INIT_STAT(&priv->tx_pend_stat);
+       INIT_STAT(&priv->tx_free_stat);
+
+       for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+               /* We simply drop any SKBs that have been queued for
+                * transmit */
+               if (priv->tx_buffers[i].info.d_struct.txb) {
+                       ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb);
+                       priv->tx_buffers[i].info.d_struct.txb = NULL;
+               }
+
+               list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
+       }
+
+       SET_STAT(&priv->tx_free_stat, i);
+
+       priv->tx_queue.oldest = 0;
+       priv->tx_queue.available = priv->tx_queue.entries;
+       priv->tx_queue.next = 0;
+       INIT_STAT(&priv->txq_stat);
+       SET_STAT(&priv->txq_stat, priv->tx_queue.available);
+
+       bd_queue_initialize(priv, &priv->tx_queue,
+                           IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
+                           IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
+                           IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
+                           IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
+
+       IPW_DEBUG_INFO("exit\n");
+
+}
+
+static void ipw2100_tx_free(struct ipw2100_priv *priv)
+{
+       int i;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       bd_queue_free(priv, &priv->tx_queue);
+
+       if (!priv->tx_buffers)
+               return;
+
+       for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
+               if (priv->tx_buffers[i].info.d_struct.txb) {
+                       ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb);
+                       priv->tx_buffers[i].info.d_struct.txb = NULL;
+               }
+               if (priv->tx_buffers[i].info.d_struct.data)
+                       pci_free_consistent(
+                               priv->pci_dev,
+                               sizeof(struct ipw2100_data_header),
+                               priv->tx_buffers[i].info.d_struct.data,
+                               priv->tx_buffers[i].info.d_struct.data_phys);
+       }
+
+       kfree(priv->tx_buffers);
+       priv->tx_buffers = NULL;
+
+       IPW_DEBUG_INFO("exit\n");
+}
+
+
+
+static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
+{
+       int i, j, err = -EINVAL;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
+       if (err) {
+               IPW_DEBUG_INFO("failed bd_queue_allocate\n");
+               return err;
+       }
+
+       err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
+       if (err) {
+               IPW_DEBUG_INFO("failed status_queue_allocate\n");
+               bd_queue_free(priv, &priv->rx_queue);
+               return err;
+       }
+
+       /*
+        * allocate packets
+        */
+       priv->rx_buffers = (struct ipw2100_rx_packet *)
+           kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
+                   GFP_KERNEL);
+       if (!priv->rx_buffers) {
+               IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
+
+               bd_queue_free(priv, &priv->rx_queue);
+
+               status_queue_free(priv);
+
+               return -ENOMEM;
+       }
+
+       for (i = 0; i < RX_QUEUE_LENGTH; i++) {
+               struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
+
+               err = ipw2100_alloc_skb(priv, packet);
+               if (unlikely(err)) {
+                       err = -ENOMEM;
+                       break;
+               }
+
+               /* The BD holds the cache aligned address */
+               priv->rx_queue.drv[i].host_addr = packet->dma_addr;
+               priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
+               priv->status_queue.drv[i].status_fields = 0;
+       }
+
+       if (i == RX_QUEUE_LENGTH)
+               return 0;
+
+       for (j = 0; j < i; j++) {
+               pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
+                                sizeof(struct ipw2100_rx_packet),
+                                PCI_DMA_FROMDEVICE);
+               dev_kfree_skb(priv->rx_buffers[j].skb);
+       }
+
+       kfree(priv->rx_buffers);
+       priv->rx_buffers = NULL;
+
+       bd_queue_free(priv, &priv->rx_queue);
+
+       status_queue_free(priv);
+
+       return err;
+}
+
+static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
+{
+       IPW_DEBUG_INFO("enter\n");
+
+       priv->rx_queue.oldest = 0;
+       priv->rx_queue.available = priv->rx_queue.entries - 1;
+       priv->rx_queue.next = priv->rx_queue.entries - 1;
+
+       INIT_STAT(&priv->rxq_stat);
+       SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
+
+       bd_queue_initialize(priv, &priv->rx_queue,
+                           IPW_MEM_HOST_SHARED_RX_BD_BASE,
+                           IPW_MEM_HOST_SHARED_RX_BD_SIZE,
+                           IPW_MEM_HOST_SHARED_RX_READ_INDEX,
+                           IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
+
+       /* set up the status queue */
+       write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
+                      priv->status_queue.nic);
+
+       IPW_DEBUG_INFO("exit\n");
+}
+
+static void ipw2100_rx_free(struct ipw2100_priv *priv)
+{
+       int i;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       bd_queue_free(priv, &priv->rx_queue);
+       status_queue_free(priv);
+
+       if (!priv->rx_buffers)
+               return;
+
+       for (i = 0; i < RX_QUEUE_LENGTH; i++) {
+               if (priv->rx_buffers[i].rxp) {
+                       pci_unmap_single(priv->pci_dev,
+                                        priv->rx_buffers[i].dma_addr,
+                                        sizeof(struct ipw2100_rx),
+                                        PCI_DMA_FROMDEVICE);
+                       dev_kfree_skb(priv->rx_buffers[i].skb);
+               }
+       }
+
+       kfree(priv->rx_buffers);
+       priv->rx_buffers = NULL;
+
+       IPW_DEBUG_INFO("exit\n");
+}
+
+static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
+{
+       u32 length = ETH_ALEN;
+       u8 mac[ETH_ALEN];
+
+       int err;
+
+       err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC,
+                                 mac, &length);
+       if (err) {
+               IPW_DEBUG_INFO("MAC address read failed\n");
+               return -EIO;
+       }
+       IPW_DEBUG_INFO("card MAC is %02X:%02X:%02X:%02X:%02X:%02X\n",
+              mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
+
+       memcpy(priv->net_dev->dev_addr, mac, ETH_ALEN);
+
+       return 0;
+}
+
+/********************************************************************
+ *
+ * Firmware Commands
+ *
+ ********************************************************************/
+
+int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = ADAPTER_ADDRESS,
+               .host_command_sequence = 0,
+               .host_command_length = ETH_ALEN
+       };
+       int err;
+
+       IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
+
+       IPW_DEBUG_INFO("enter\n");
+
+       if (priv->config & CFG_CUSTOM_MAC) {
+               memcpy(cmd.host_command_parameters, priv->mac_addr,
+                      ETH_ALEN);
+               memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
+       } else
+               memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
+                      ETH_ALEN);
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       IPW_DEBUG_INFO("exit\n");
+       return err;
+}
+
+int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
+                                int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = PORT_TYPE,
+               .host_command_sequence = 0,
+               .host_command_length = sizeof(u32)
+       };
+       int err;
+
+       switch (port_type) {
+       case IW_MODE_INFRA:
+               cmd.host_command_parameters[0] = IPW_BSS;
+               break;
+       case IW_MODE_ADHOC:
+               cmd.host_command_parameters[0] = IPW_IBSS;
+               break;
+       }
+
+       IPW_DEBUG_HC("PORT_TYPE: %s\n",
+                    port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err) {
+                       IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+                              priv->net_dev->name, err);
+                       return err;
+               }
+       }
+
+       /* send cmd to firmware */
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode)
+               ipw2100_enable_adapter(priv);
+
+       return err;
+}
+
+
+int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel, int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = CHANNEL,
+               .host_command_sequence = 0,
+               .host_command_length = sizeof(u32)
+       };
+       int err;
+
+       cmd.host_command_parameters[0] = channel;
+
+       IPW_DEBUG_HC("CHANNEL: %d\n", channel);
+
+       /* If BSS then we don't support channel selection */
+       if (priv->ieee->iw_mode == IW_MODE_INFRA)
+               return 0;
+
+       if ((channel != 0) &&
+           ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
+               return -EINVAL;
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err) {
+               IPW_DEBUG_INFO("Failed to set channel to %d",
+                              channel);
+               return err;
+       }
+
+       if (channel)
+               priv->config |= CFG_STATIC_CHANNEL;
+       else
+               priv->config &= ~CFG_STATIC_CHANNEL;
+
+       priv->channel = channel;
+
+       if (!batch_mode) {
+               err = ipw2100_enable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       return 0;
+}
+
+int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = SYSTEM_CONFIG,
+               .host_command_sequence = 0,
+               .host_command_length = 12,
+       };
+       u32 ibss_mask, len = sizeof(u32);
+       int err;
+
+       /* Set system configuration */
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       if (priv->ieee->iw_mode == IW_MODE_ADHOC)
+               cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
+
+       cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
+               IPW_CFG_BSS_MASK |
+               IPW_CFG_802_1x_ENABLE;
+
+       if (!(priv->config & CFG_LONG_PREAMBLE))
+               cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
+
+       err = ipw2100_get_ordinal(priv,
+                                 IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
+                                 &ibss_mask,  &len);
+       if (err)
+               ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
+
+       cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
+       cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
+
+       /* 11b only */
+       /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A;*/
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err)
+               return err;
+
+/* If IPv6 is configured in the kernel then we don't want to filter out all
+ * of the multicast packets as IPv6 needs some. */
+#if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
+       cmd.host_command = ADD_MULTICAST;
+       cmd.host_command_sequence = 0;
+       cmd.host_command_length = 0;
+
+       ipw2100_hw_send_command(priv, &cmd);
+#endif
+       if (!batch_mode) {
+               err = ipw2100_enable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       return 0;
+}
+
+int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate, int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = BASIC_TX_RATES,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err;
+
+       cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       /* Set BASIC TX Rate first */
+       ipw2100_hw_send_command(priv, &cmd);
+
+       /* Set TX Rate */
+       cmd.host_command = TX_RATES;
+       ipw2100_hw_send_command(priv, &cmd);
+
+       /* Set MSDU TX Rate */
+       cmd.host_command = MSDU_TX_RATES;
+       ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode) {
+               err = ipw2100_enable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       priv->tx_rates = rate;
+
+       return 0;
+}
+
+int ipw2100_set_power_mode(struct ipw2100_priv *priv,
+                          int power_level)
+{
+       struct host_command cmd = {
+               .host_command = POWER_MODE,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err;
+
+       cmd.host_command_parameters[0] = power_level;
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err)
+               return err;
+
+       if (power_level == IPW_POWER_MODE_CAM)
+               priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
+       else
+               priv->power_mode = IPW_POWER_ENABLED | power_level;
+
+#ifdef CONFIG_IPW2100_TX_POWER
+       if (priv->port_type == IBSS &&
+           priv->adhoc_power != DFTL_IBSS_TX_POWER) {
+               /* Set beacon interval */
+               cmd.host_command = TX_POWER_INDEX;
+               cmd.host_command_parameters[0] = (u32)priv->adhoc_power;
+
+               err = ipw2100_hw_send_command(priv, &cmd);
+               if (err)
+                       return err;
+       }
+#endif
+
+       return 0;
+}
+
+
+int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
+{
+       struct host_command cmd = {
+               .host_command = RTS_THRESHOLD,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err;
+
+       if (threshold & RTS_DISABLED)
+               cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
+       else
+               cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err)
+               return err;
+
+       priv->rts_threshold = threshold;
+
+       return 0;
+}
+
+#if 0
+int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
+                                       u32 threshold, int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = FRAG_THRESHOLD,
+               .host_command_sequence = 0,
+               .host_command_length = 4,
+               .host_command_parameters[0] = 0,
+       };
+       int err;
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       if (threshold == 0)
+               threshold = DEFAULT_FRAG_THRESHOLD;
+       else {
+               threshold = max(threshold, MIN_FRAG_THRESHOLD);
+               threshold = min(threshold, MAX_FRAG_THRESHOLD);
+       }
+
+       cmd.host_command_parameters[0] = threshold;
+
+       IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode)
+               ipw2100_enable_adapter(priv);
+
+       if (!err)
+               priv->frag_threshold = threshold;
+
+       return err;
+}
+#endif
+
+int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
+{
+       struct host_command cmd = {
+               .host_command = SHORT_RETRY_LIMIT,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err;
+
+       cmd.host_command_parameters[0] = retry;
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err)
+               return err;
+
+       priv->short_retry_limit = retry;
+
+       return 0;
+}
+
+int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
+{
+       struct host_command cmd = {
+               .host_command = LONG_RETRY_LIMIT,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err;
+
+       cmd.host_command_parameters[0] = retry;
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+       if (err)
+               return err;
+
+       priv->long_retry_limit = retry;
+
+       return 0;
+}
+
+
+int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 *bssid,
+                               int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = MANDATORY_BSSID,
+               .host_command_sequence = 0,
+               .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
+       };
+       int err;
+
+#ifdef CONFIG_IPW_DEBUG
+       if (bssid != NULL)
+               IPW_DEBUG_HC(
+                       "MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n",
+                       bssid[0], bssid[1], bssid[2], bssid[3], bssid[4],
+                       bssid[5]);
+       else
+               IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
+#endif
+       /* if BSSID is empty then we disable mandatory bssid mode */
+       if (bssid != NULL)
+               memcpy((u8 *)cmd.host_command_parameters, bssid, ETH_ALEN);
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode)
+               ipw2100_enable_adapter(priv);
+
+       return err;
+}
+
+#ifdef CONFIG_IEEE80211_WPA
+static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
+{
+       struct host_command cmd = {
+               .host_command = DISASSOCIATION_BSSID,
+               .host_command_sequence = 0,
+               .host_command_length = ETH_ALEN
+       };
+       int err;
+       int len;
+
+       IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
+
+       len = ETH_ALEN;
+       /* The Firmware currently ignores the BSSID and just disassociates from
+        * the currently associated AP -- but in the off chance that a future
+        * firmware does use the BSSID provided here, we go ahead and try and
+        * set it to the currently associated AP's BSSID */
+       memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       return err;
+}
+#endif
+
+/*
+ * Pseudo code for setting up wpa_frame:
+ */
+#if 0
+void x(struct ieee80211_assoc_frame *wpa_assoc)
+{
+       struct ipw2100_wpa_assoc_frame frame;
+       frame->fixed_ie_mask = IPW_WPA_CAPABILTIES |
+               IPW_WPA_LISTENINTERVAL |
+               IPW_WPA_AP_ADDRESS;
+       frame->capab_info = wpa_assoc->capab_info;
+       frame->lisen_interval = wpa_assoc->listent_interval;
+       memcpy(frame->current_ap, wpa_assoc->current_ap, ETH_ALEN);
+
+       /* UNKNOWN -- I'm not postivive about this part; don't have any WPA
+        * setup here to test it with.
+        *
+        * Walk the IEs in the wpa_assoc and figure out the total size of all
+        * that data.  Stick that into frame->var_ie_len.  Then memcpy() all of
+        * the IEs from wpa_frame into frame.
+        */
+       frame->var_ie_len = calculate_ie_len(wpa_assoc);
+       memcpy(frame->var_ie,  wpa_assoc->variable, frame->var_ie_len);
+
+       ipw2100_set_wpa_ie(priv, &frame, 0);
+}
+#endif
+
+
+
+
+static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
+                             struct ipw2100_wpa_assoc_frame *, int)
+__attribute__ ((unused));
+
+static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
+                             struct ipw2100_wpa_assoc_frame *wpa_frame,
+                             int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = SET_WPA_IE,
+               .host_command_sequence = 0,
+               .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
+       };
+       int err;
+
+       IPW_DEBUG_HC("SET_WPA_IE\n");
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       memcpy(cmd.host_command_parameters, wpa_frame,
+              sizeof(struct ipw2100_wpa_assoc_frame));
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode) {
+               if (ipw2100_enable_adapter(priv))
+                       err = -EIO;
+       }
+
+       return err;
+}
+
+struct security_info_params {
+       u32 allowed_ciphers;
+       u16 version;
+       u8 auth_mode;
+       u8 replay_counters_number;
+       u8 unicast_using_group;
+} __attribute__ ((packed));
+
+int ipw2100_set_security_information(struct ipw2100_priv *priv,
+                                    int auth_mode,
+                                    int security_level,
+                                    int unicast_using_group,
+                                    int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = SET_SECURITY_INFORMATION,
+               .host_command_sequence = 0,
+               .host_command_length = sizeof(struct security_info_params)
+       };
+       struct security_info_params *security =
+               (struct security_info_params *)&cmd.host_command_parameters;
+       int err;
+       memset(security, 0, sizeof(*security));
+
+       /* If shared key AP authentication is turned on, then we need to
+        * configure the firmware to try and use it.
+        *
+        * Actual data encryption/decryption is handled by the host. */
+       security->auth_mode = auth_mode;
+       security->unicast_using_group = unicast_using_group;
+
+       switch (security_level) {
+       default:
+       case SEC_LEVEL_0:
+               security->allowed_ciphers = IPW_NONE_CIPHER;
+               break;
+       case SEC_LEVEL_1:
+               security->allowed_ciphers = IPW_WEP40_CIPHER |
+                       IPW_WEP104_CIPHER;
+               break;
+       case SEC_LEVEL_2:
+               security->allowed_ciphers = IPW_WEP40_CIPHER |
+                       IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
+               break;
+       case SEC_LEVEL_2_CKIP:
+               security->allowed_ciphers = IPW_WEP40_CIPHER |
+                       IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
+               break;
+       case SEC_LEVEL_3:
+               security->allowed_ciphers = IPW_WEP40_CIPHER |
+                       IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
+               break;
+       }
+
+       IPW_DEBUG_HC(
+               "SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
+               security->auth_mode, security->allowed_ciphers, security_level);
+
+       security->replay_counters_number = 0;
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode)
+               ipw2100_enable_adapter(priv);
+
+       return err;
+}
+
+int ipw2100_set_tx_power(struct ipw2100_priv *priv,
+                        u32 tx_power)
+{
+       struct host_command cmd = {
+               .host_command = TX_POWER_INDEX,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err = 0;
+
+       cmd.host_command_parameters[0] = tx_power;
+
+       if (priv->ieee->iw_mode == IW_MODE_ADHOC)
+               err = ipw2100_hw_send_command(priv, &cmd);
+       if (!err)
+               priv->tx_power = tx_power;
+
+       return 0;
+}
+
+int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
+                                    u32 interval, int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = BEACON_INTERVAL,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err;
+
+       cmd.host_command_parameters[0] = interval;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+               if (!batch_mode) {
+                       err = ipw2100_disable_adapter(priv);
+                       if (err)
+                               return err;
+               }
+
+               ipw2100_hw_send_command(priv, &cmd);
+
+               if (!batch_mode) {
+                       err = ipw2100_enable_adapter(priv);
+                       if (err)
+                               return err;
+               }
+       }
+
+       IPW_DEBUG_INFO("exit\n");
+
+       return 0;
+}
+
+
+void ipw2100_queues_initialize(struct ipw2100_priv *priv)
+{
+       ipw2100_tx_initialize(priv);
+       ipw2100_rx_initialize(priv);
+       ipw2100_msg_initialize(priv);
+}
+
+void ipw2100_queues_free(struct ipw2100_priv *priv)
+{
+       ipw2100_tx_free(priv);
+       ipw2100_rx_free(priv);
+       ipw2100_msg_free(priv);
+}
+
+int ipw2100_queues_allocate(struct ipw2100_priv *priv)
+{
+       if (ipw2100_tx_allocate(priv) ||
+           ipw2100_rx_allocate(priv) ||
+           ipw2100_msg_allocate(priv))
+               goto fail;
+
+       return 0;
+
+ fail:
+       ipw2100_tx_free(priv);
+       ipw2100_rx_free(priv);
+       ipw2100_msg_free(priv);
+       return -ENOMEM;
+}
+
+#define IPW_PRIVACY_CAPABLE 0x0008
+
+static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
+                                int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = WEP_FLAGS,
+               .host_command_sequence = 0,
+               .host_command_length = 4
+       };
+       int err;
+
+       cmd.host_command_parameters[0] = flags;
+
+       IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err) {
+                       IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+                              priv->net_dev->name, err);
+                       return err;
+               }
+       }
+
+       /* send cmd to firmware */
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode)
+               ipw2100_enable_adapter(priv);
+
+       return err;
+}
+
+struct ipw2100_wep_key {
+       u8 idx;
+       u8 len;
+       u8 key[13];
+};
+
+/* Macros to ease up priting WEP keys */
+#define WEP_FMT_64  "%02X%02X%02X%02X-%02X"
+#define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
+#define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
+#define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
+
+
+/**
+ * Set a the wep key
+ *
+ * @priv: struct to work on
+ * @idx: index of the key we want to set
+ * @key: ptr to the key data to set
+ * @len: length of the buffer at @key
+ * @batch_mode: FIXME perform the operation in batch mode, not
+ *              disabling the device.
+ *
+ * @returns 0 if OK, < 0 errno code on error.
+ *
+ * Fill out a command structure with the new wep key, length an
+ * index and send it down the wire.
+ */
+static int ipw2100_set_key(struct ipw2100_priv *priv,
+                          int idx, char *key, int len, int batch_mode)
+{
+       int keylen = len ? (len <= 5 ? 5 : 13) : 0;
+       struct host_command cmd = {
+               .host_command = WEP_KEY_INFO,
+               .host_command_sequence = 0,
+               .host_command_length = sizeof(struct ipw2100_wep_key),
+       };
+       struct ipw2100_wep_key *wep_key = (void*)cmd.host_command_parameters;
+       int err;
+
+       IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
+                                idx, keylen, len);
+
+       /* NOTE: We don't check cached values in case the firmware was reset
+        * or some other problem is occuring.  If the user is setting the key,
+        * then we push the change */
+
+       wep_key->idx = idx;
+       wep_key->len = keylen;
+
+       if (keylen) {
+               memcpy(wep_key->key, key, len);
+               memset(wep_key->key + len, 0, keylen - len);
+       }
+
+       /* Will be optimized out on debug not being configured in */
+       if (keylen == 0)
+               IPW_DEBUG_WEP("%s: Clearing key %d\n",
+                                 priv->net_dev->name, wep_key->idx);
+       else if (keylen == 5)
+               IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
+                                 priv->net_dev->name, wep_key->idx, wep_key->len,
+                                 WEP_STR_64(wep_key->key));
+       else
+               IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
+                                 "\n",
+                                 priv->net_dev->name, wep_key->idx, wep_key->len,
+                                 WEP_STR_128(wep_key->key));
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
+               if (err) {
+                       IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+                              priv->net_dev->name, err);
+                       return err;
+               }
+       }
+
+       /* send cmd to firmware */
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode) {
+               int err2 = ipw2100_enable_adapter(priv);
+               if (err == 0)
+                       err = err2;
+       }
+       return err;
+}
+
+static int ipw2100_set_key_index(struct ipw2100_priv *priv,
+                                int idx, int batch_mode)
+{
+       struct host_command cmd = {
+               .host_command = WEP_KEY_INDEX,
+               .host_command_sequence = 0,
+               .host_command_length = 4,
+               .host_command_parameters[0] = idx,
+       };
+       int err;
+
+       IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
+
+       if (idx < 0 || idx > 3)
+               return -EINVAL;
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err) {
+                       IPW_DEBUG_ERROR("%s: Could not disable adapter %d\n",
+                              priv->net_dev->name, err);
+                       return err;
+               }
+       }
+
+       /* send cmd to firmware */
+       err = ipw2100_hw_send_command(priv, &cmd);
+
+       if (!batch_mode)
+               ipw2100_enable_adapter(priv);
+
+       return err;
+}
+
+
+static int ipw2100_configure_security(struct ipw2100_priv *priv,
+                                     int batch_mode)
+{
+       int i, err, auth_mode, sec_level, use_group;
+
+       if (!(priv->status & STATUS_RUNNING))
+               return 0;
+
+       if (!batch_mode) {
+               err = ipw2100_disable_adapter(priv);
+               if (err)
+                       return err;
+       }
+
+       if (!priv->sec.enabled) {
+               err = ipw2100_set_security_information(
+                       priv, IPW_AUTH_OPEN, SEC_LEVEL_0, 0, 1);
+       } else {
+               auth_mode = IPW_AUTH_OPEN;
+               if ((priv->sec.flags & SEC_AUTH_MODE) &&
+                   (priv->sec.auth_mode == WLAN_AUTH_SHARED_KEY))
+                       auth_mode = IPW_AUTH_SHARED;
+
+               sec_level = SEC_LEVEL_0;
+               if (priv->sec.flags & SEC_LEVEL)
+                       sec_level = priv->sec.level;
+
+               use_group = 0;
+               if (priv->sec.flags & SEC_UNICAST_GROUP)
+                       use_group = priv->sec.unicast_uses_group;
+
+               err = ipw2100_set_security_information(
+                           priv, auth_mode, sec_level, use_group, 1);
+       }
+
+       if (err)
+               goto exit;
+
+       if (priv->sec.enabled) {
+               for (i = 0; i < 4; i++) {
+                       if (!(priv->sec.flags & (1 << i))) {
+                               memset(priv->sec.keys[i], 0, WEP_KEY_LEN);
+                               priv->sec.key_sizes[i] = 0;
+                       } else {
+                               err = ipw2100_set_key(priv, i,
+                                                     priv->sec.keys[i],
+                                                     priv->sec.key_sizes[i],
+                                                     1);
+                               if (err)
+                                       goto exit;
+                       }
+               }
+
+               ipw2100_set_key_index(priv, priv->ieee->tx_keyidx, 1);
+       }
+
+       /* Always enable privacy so the Host can filter WEP packets if
+        * encrypted data is sent up */
+       err = ipw2100_set_wep_flags(
+               priv, priv->sec.enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
+       if (err)
+               goto exit;
+
+       priv->status &= ~STATUS_SECURITY_UPDATED;
+
+ exit:
+       if (!batch_mode)
+               ipw2100_enable_adapter(priv);
+
+       return err;
+}
+
+static void ipw2100_security_work(struct ipw2100_priv *priv)
+{
+       /* If we happen to have reconnected before we get a chance to
+        * process this, then update the security settings--which causes
+        * a disassociation to occur */
+       if (!(priv->status & STATUS_ASSOCIATED) &&
+           priv->status & STATUS_SECURITY_UPDATED)
+               ipw2100_configure_security(priv, 0);
+}
+
+static void shim__set_security(struct net_device *dev,
+                              struct ieee80211_security *sec)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int i, force_update = 0;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED))
+               goto done;
+
+       for (i = 0; i < 4; i++) {
+               if (sec->flags & (1 << i)) {
+                       priv->sec.key_sizes[i] = sec->key_sizes[i];
+                       if (sec->key_sizes[i] == 0)
+                               priv->sec.flags &= ~(1 << i);
+                       else
+                               memcpy(priv->sec.keys[i], sec->keys[i],
+                                      sec->key_sizes[i]);
+                       priv->sec.flags |= (1 << i);
+                       priv->status |= STATUS_SECURITY_UPDATED;
+               }
+       }
+
+       if ((sec->flags & SEC_ACTIVE_KEY) &&
+           priv->sec.active_key != sec->active_key) {
+               if (sec->active_key <= 3) {
+                       priv->sec.active_key = sec->active_key;
+                       priv->sec.flags |= SEC_ACTIVE_KEY;
+               } else
+                       priv->sec.flags &= ~SEC_ACTIVE_KEY;
+
+               priv->status |= STATUS_SECURITY_UPDATED;
+       }
+
+       if ((sec->flags & SEC_AUTH_MODE) &&
+           (priv->sec.auth_mode != sec->auth_mode)) {
+               priv->sec.auth_mode = sec->auth_mode;
+               priv->sec.flags |= SEC_AUTH_MODE;
+               priv->status |= STATUS_SECURITY_UPDATED;
+       }
+
+       if (sec->flags & SEC_ENABLED &&
+           priv->sec.enabled != sec->enabled) {
+               priv->sec.flags |= SEC_ENABLED;
+               priv->sec.enabled = sec->enabled;
+               priv->status |= STATUS_SECURITY_UPDATED;
+               force_update = 1;
+       }
+
+       if (sec->flags & SEC_LEVEL &&
+           priv->sec.level != sec->level) {
+               priv->sec.level = sec->level;
+               priv->sec.flags |= SEC_LEVEL;
+               priv->status |= STATUS_SECURITY_UPDATED;
+       }
+
+       IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
+                         priv->sec.flags & (1<<8) ? '1' : '0',
+                         priv->sec.flags & (1<<7) ? '1' : '0',
+                         priv->sec.flags & (1<<6) ? '1' : '0',
+                         priv->sec.flags & (1<<5) ? '1' : '0',
+                         priv->sec.flags & (1<<4) ? '1' : '0',
+                         priv->sec.flags & (1<<3) ? '1' : '0',
+                         priv->sec.flags & (1<<2) ? '1' : '0',
+                         priv->sec.flags & (1<<1) ? '1' : '0',
+                         priv->sec.flags & (1<<0) ? '1' : '0');
+
+/* As a temporary work around to enable WPA until we figure out why
+ * wpa_supplicant toggles the security capability of the driver, which
+ * forces a disassocation with force_update...
+ *
+ *     if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
+       if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
+               ipw2100_configure_security(priv, 0);
+done:
+       up(&priv->action_sem);
+}
+
+static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
+{
+       int err;
+       int batch_mode = 1;
+       u8 *bssid;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       err = ipw2100_disable_adapter(priv);
+       if (err)
+               return err;
+#ifdef CONFIG_IPW2100_MONITOR
+       if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+               err = ipw2100_set_channel(priv, priv->channel, batch_mode);
+               if (err)
+                       return err;
+
+               IPW_DEBUG_INFO("exit\n");
+
+               return 0;
+       }
+#endif /* CONFIG_IPW2100_MONITOR */
+
+       err = ipw2100_read_mac_address(priv);
+       if (err)
+               return -EIO;
+
+       err = ipw2100_set_mac_address(priv, batch_mode);
+       if (err)
+               return err;
+
+       err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
+       if (err)
+               return err;
+
+       if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+               err = ipw2100_set_channel(priv, priv->channel, batch_mode);
+               if (err)
+                       return err;
+       }
+
+       err  = ipw2100_system_config(priv, batch_mode);
+       if (err)
+               return err;
+
+       err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
+       if (err)
+               return err;
+
+       /* Default to power mode OFF */
+       err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
+       if (err)
+               return err;
+
+       err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
+       if (err)
+               return err;
+
+       if (priv->config & CFG_STATIC_BSSID)
+               bssid = priv->bssid;
+       else
+               bssid = NULL;
+       err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
+       if (err)
+               return err;
+
+       if (priv->config & CFG_STATIC_ESSID)
+               err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
+                                       batch_mode);
+       else
+               err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
+       if (err)
+               return err;
+
+       err = ipw2100_configure_security(priv, batch_mode);
+       if (err)
+               return err;
+
+       if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+               err = ipw2100_set_ibss_beacon_interval(
+                       priv, priv->beacon_interval, batch_mode);
+               if (err)
+                       return err;
+
+               err = ipw2100_set_tx_power(priv, priv->tx_power);
+               if (err)
+                       return err;
+       }
+
+       /*
+         err = ipw2100_set_fragmentation_threshold(
+         priv, priv->frag_threshold, batch_mode);
+         if (err)
+         return err;
+       */
+
+       IPW_DEBUG_INFO("exit\n");
+
+       return 0;
+}
+
+
+/*************************************************************************
+ *
+ * EXTERNALLY CALLED METHODS
+ *
+ *************************************************************************/
+
+/* This method is called by the network layer -- not to be confused with
+ * ipw2100_set_mac_address() declared above called by this driver (and this
+ * method as well) to talk to the firmware */
+static int ipw2100_set_address(struct net_device *dev, void *p)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       struct sockaddr *addr = p;
+       int err = 0;
+
+       if (!is_valid_ether_addr(addr->sa_data))
+               return -EADDRNOTAVAIL;
+
+       down(&priv->action_sem);
+
+       priv->config |= CFG_CUSTOM_MAC;
+       memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
+
+       err = ipw2100_set_mac_address(priv, 0);
+       if (err)
+               goto done;
+
+       priv->reset_backoff = 0;
+       up(&priv->action_sem);
+       ipw2100_reset_adapter(priv);
+       return 0;
+
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_open(struct net_device *dev)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       unsigned long flags;
+       IPW_DEBUG_INFO("dev->open\n");
+
+       spin_lock_irqsave(&priv->low_lock, flags);
+       if (priv->status & STATUS_ASSOCIATED)
+               netif_start_queue(dev);
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+       return 0;
+}
+
+static int ipw2100_close(struct net_device *dev)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       unsigned long flags;
+       struct list_head *element;
+       struct ipw2100_tx_packet *packet;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       spin_lock_irqsave(&priv->low_lock, flags);
+
+       if (priv->status & STATUS_ASSOCIATED)
+               netif_carrier_off(dev);
+       netif_stop_queue(dev);
+
+       /* Flush the TX queue ... */
+       while (!list_empty(&priv->tx_pend_list)) {
+               element = priv->tx_pend_list.next;
+                packet = list_entry(element, struct ipw2100_tx_packet, list);
+
+               list_del(element);
+               DEC_STAT(&priv->tx_pend_stat);
+
+               ieee80211_txb_free(packet->info.d_struct.txb);
+               packet->info.d_struct.txb = NULL;
+
+               list_add_tail(element, &priv->tx_free_list);
+               INC_STAT(&priv->tx_free_stat);
+       }
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+
+       IPW_DEBUG_INFO("exit\n");
+
+       return 0;
+}
+
+
+
+/*
+ * TODO:  Fix this function... its just wrong
+ */
+static void ipw2100_tx_timeout(struct net_device *dev)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       priv->ieee->stats.tx_errors++;
+
+#ifdef CONFIG_IPW2100_MONITOR
+       if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+               return;
+#endif
+
+       IPW_DEBUG_INFO("%s: TX timed out.  Scheduling firmware restart.\n",
+                      dev->name);
+       schedule_reset(priv);
+}
+
+
+/*
+ * TODO: reimplement it so that it reads statistics
+ *       from the adapter using ordinal tables
+ *       instead of/in addition to collecting them
+ *       in the driver
+ */
+static struct net_device_stats *ipw2100_stats(struct net_device *dev)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       return &priv->ieee->stats;
+}
+
+/* Support for wpa_supplicant. Will be replaced with WEXT once
+ * they get WPA support. */
+#ifdef CONFIG_IEEE80211_WPA
+
+/* following definitions must match definitions in driver_ipw2100.c */
+
+#define IPW2100_IOCTL_WPA_SUPPLICANT           SIOCIWFIRSTPRIV+30
+
+#define IPW2100_CMD_SET_WPA_PARAM              1
+#define        IPW2100_CMD_SET_WPA_IE                  2
+#define IPW2100_CMD_SET_ENCRYPTION             3
+#define IPW2100_CMD_MLME                       4
+
+#define IPW2100_PARAM_WPA_ENABLED              1
+#define IPW2100_PARAM_TKIP_COUNTERMEASURES     2
+#define IPW2100_PARAM_DROP_UNENCRYPTED         3
+#define IPW2100_PARAM_PRIVACY_INVOKED          4
+#define IPW2100_PARAM_AUTH_ALGS                        5
+#define IPW2100_PARAM_IEEE_802_1X              6
+
+#define IPW2100_MLME_STA_DEAUTH                        1
+#define IPW2100_MLME_STA_DISASSOC              2
+
+#define IPW2100_CRYPT_ERR_UNKNOWN_ALG          2
+#define IPW2100_CRYPT_ERR_UNKNOWN_ADDR         3
+#define IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED    4
+#define IPW2100_CRYPT_ERR_KEY_SET_FAILED       5
+#define IPW2100_CRYPT_ERR_TX_KEY_SET_FAILED    6
+#define IPW2100_CRYPT_ERR_CARD_CONF_FAILED     7
+
+#define        IPW2100_CRYPT_ALG_NAME_LEN              16
+
+struct ipw2100_param {
+       u32 cmd;
+       u8 sta_addr[ETH_ALEN];
+        union {
+               struct {
+                       u8 name;
+                       u32 value;
+               } wpa_param;
+               struct {
+                       u32 len;
+                       u8 *data;
+               } wpa_ie;
+               struct{
+                       int command;
+                       int reason_code;
+               } mlme;
+               struct {
+                       u8 alg[IPW2100_CRYPT_ALG_NAME_LEN];
+                       u8 set_tx;
+                       u32 err;
+                       u8 idx;
+                       u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+                       u16 key_len;
+                       u8 key[0];
+               } crypt;
+
+       } u;
+};
+
+/* end of driver_ipw2100.c code */
+
+static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value){
+
+       struct ieee80211_device *ieee = priv->ieee;
+       struct ieee80211_security sec = {
+               .flags = SEC_LEVEL | SEC_ENABLED,
+       };
+       int ret = 0;
+
+       ieee->wpa_enabled = value;
+
+       if (value){
+               sec.level = SEC_LEVEL_3;
+               sec.enabled = 1;
+       } else {
+               sec.level = SEC_LEVEL_0;
+               sec.enabled = 0;
+       }
+
+       if (ieee->set_security)
+               ieee->set_security(ieee->dev, &sec);
+       else
+               ret = -EOPNOTSUPP;
+
+       return ret;
+}
+
+#define AUTH_ALG_OPEN_SYSTEM                   0x1
+#define AUTH_ALG_SHARED_KEY                    0x2
+
+static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value){
+
+       struct ieee80211_device *ieee = priv->ieee;
+       struct ieee80211_security sec = {
+               .flags = SEC_AUTH_MODE,
+       };
+       int ret = 0;
+
+       if (value & AUTH_ALG_SHARED_KEY){
+               sec.auth_mode = WLAN_AUTH_SHARED_KEY;
+               ieee->open_wep = 0;
+       } else {
+               sec.auth_mode = WLAN_AUTH_OPEN;
+               ieee->open_wep = 1;
+       }
+
+       if (ieee->set_security)
+               ieee->set_security(ieee->dev, &sec);
+       else
+               ret = -EOPNOTSUPP;
+
+       return ret;
+}
+
+
+static int ipw2100_wpa_set_param(struct net_device *dev, u8 name, u32 value){
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int ret=0;
+
+       switch(name){
+               case IPW2100_PARAM_WPA_ENABLED:
+                       ret = ipw2100_wpa_enable(priv, value);
+                       break;
+
+               case IPW2100_PARAM_TKIP_COUNTERMEASURES:
+                       priv->ieee->tkip_countermeasures=value;
+                       break;
+
+               case IPW2100_PARAM_DROP_UNENCRYPTED:
+                       priv->ieee->drop_unencrypted=value;
+                       break;
+
+               case IPW2100_PARAM_PRIVACY_INVOKED:
+                       priv->ieee->privacy_invoked=value;
+                       break;
+
+               case IPW2100_PARAM_AUTH_ALGS:
+                       ret = ipw2100_wpa_set_auth_algs(priv, value);
+                       break;
+
+               case IPW2100_PARAM_IEEE_802_1X:
+                       priv->ieee->ieee802_1x=value;
+                       break;
+
+               default:
+                       IPW_DEBUG_ERROR("%s: Unknown WPA param: %d\n",
+                                           dev->name, name);
+                       ret = -EOPNOTSUPP;
+       }
+
+       return ret;
+}
+
+static int ipw2100_wpa_mlme(struct net_device *dev, int command, int reason){
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int ret=0;
+
+       switch(command){
+               case IPW2100_MLME_STA_DEAUTH:
+                       // silently ignore
+                       break;
+
+               case IPW2100_MLME_STA_DISASSOC:
+                       ipw2100_disassociate_bssid(priv);
+                       break;
+
+               default:
+                       IPW_DEBUG_ERROR("%s: Unknown MLME request: %d\n",
+                                           dev->name, command);
+                       ret = -EOPNOTSUPP;
+       }
+
+       return ret;
+}
+
+
+void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
+                            char *wpa_ie, int wpa_ie_len){
+
+       struct ipw2100_wpa_assoc_frame frame;
+
+       frame.fixed_ie_mask = 0;
+
+       /* copy WPA IE */
+       memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
+       frame.var_ie_len = wpa_ie_len;
+
+       /* make sure WPA is enabled */
+       ipw2100_wpa_enable(priv, 1);
+       ipw2100_set_wpa_ie(priv, &frame, 0);
+}
+
+
+static int ipw2100_wpa_set_wpa_ie(struct net_device *dev,
+                               struct ipw2100_param *param, int plen){
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       struct ieee80211_device *ieee = priv->ieee;
+       u8 *buf;
+
+       if (! ieee->wpa_enabled)
+           return -EOPNOTSUPP;
+
+       if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
+          (param->u.wpa_ie.len &&
+               param->u.wpa_ie.data==NULL))
+               return -EINVAL;
+
+       if (param->u.wpa_ie.len){
+               buf = kmalloc(param->u.wpa_ie.len, GFP_KERNEL);
+               if (buf == NULL)
+                       return -ENOMEM;
+
+               memcpy(buf, param->u.wpa_ie.data, param->u.wpa_ie.len);
+
+               kfree(ieee->wpa_ie);
+               ieee->wpa_ie = buf;
+               ieee->wpa_ie_len = param->u.wpa_ie.len;
+
+       } else {
+               kfree(ieee->wpa_ie);
+               ieee->wpa_ie = NULL;
+               ieee->wpa_ie_len = 0;
+       }
+
+       ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
+
+       return 0;
+}
+
+/* implementation borrowed from hostap driver */
+
+static int ipw2100_wpa_set_encryption(struct net_device *dev,
+                               struct ipw2100_param *param, int param_len){
+
+       int ret = 0;
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       struct ieee80211_device *ieee = priv->ieee;
+       struct ieee80211_crypto_ops *ops;
+       struct ieee80211_crypt_data **crypt;
+
+       struct ieee80211_security sec = {
+               .flags = 0,
+       };
+
+       param->u.crypt.err = 0;
+       param->u.crypt.alg[IPW2100_CRYPT_ALG_NAME_LEN - 1] = '\0';
+
+       if (param_len !=
+           (int) ((char *) param->u.crypt.key - (char *) param) +
+           param->u.crypt.key_len){
+               IPW_DEBUG_INFO("Len mismatch %d, %d\n", param_len, param->u.crypt.key_len);
+               return -EINVAL;
+       }
+       if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
+           param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
+           param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
+               if (param->u.crypt.idx >= WEP_KEYS)
+                       return -EINVAL;
+               crypt = &ieee->crypt[param->u.crypt.idx];
+       } else {
+               return -EINVAL;
+       }
+
+       if (strcmp(param->u.crypt.alg, "none") == 0) {
+               if (crypt){
+                       sec.enabled = 0;
+                       sec.level = SEC_LEVEL_0;
+                       sec.flags |= SEC_ENABLED | SEC_LEVEL;
+                       ieee80211_crypt_delayed_deinit(ieee, crypt);
+               }
+               goto done;
+       }
+       sec.enabled = 1;
+       sec.flags |= SEC_ENABLED;
+
+       ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+       if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
+               request_module("ieee80211_crypt_wep");
+               ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+       } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
+               request_module("ieee80211_crypt_tkip");
+               ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+       } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
+               request_module("ieee80211_crypt_ccmp");
+               ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
+       }
+       if (ops == NULL) {
+               IPW_DEBUG_INFO("%s: unknown crypto alg '%s'\n",
+                      dev->name, param->u.crypt.alg);
+               param->u.crypt.err = IPW2100_CRYPT_ERR_UNKNOWN_ALG;
+               ret = -EINVAL;
+               goto done;
+       }
+
+       if (*crypt == NULL || (*crypt)->ops != ops) {
+               struct ieee80211_crypt_data *new_crypt;
+
+               ieee80211_crypt_delayed_deinit(ieee, crypt);
+
+               new_crypt = (struct ieee80211_crypt_data *)
+                       kmalloc(sizeof(struct ieee80211_crypt_data), GFP_KERNEL);
+               if (new_crypt == NULL) {
+                       ret = -ENOMEM;
+                       goto done;
+               }
+               memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
+               new_crypt->ops = ops;
+               if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+                       new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx);
+
+               if (new_crypt->priv == NULL) {
+                       kfree(new_crypt);
+                       param->u.crypt.err =
+                               IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED;
+                       ret = -EINVAL;
+                       goto done;
+               }
+
+               *crypt = new_crypt;
+       }
+
+       if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
+           (*crypt)->ops->set_key(param->u.crypt.key,
+                                  param->u.crypt.key_len, param->u.crypt.seq,
+                                  (*crypt)->priv) < 0) {
+               IPW_DEBUG_INFO("%s: key setting failed\n",
+                      dev->name);
+               param->u.crypt.err = IPW2100_CRYPT_ERR_KEY_SET_FAILED;
+               ret = -EINVAL;
+               goto done;
+       }
+
+       if (param->u.crypt.set_tx){
+               ieee->tx_keyidx = param->u.crypt.idx;
+               sec.active_key = param->u.crypt.idx;
+               sec.flags |= SEC_ACTIVE_KEY;
+       }
+
+       if (ops->name != NULL){
+
+               if (strcmp(ops->name, "WEP") == 0) {
+                       memcpy(sec.keys[param->u.crypt.idx], param->u.crypt.key, param->u.crypt.key_len);
+                       sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len;
+                       sec.flags |= (1 << param->u.crypt.idx);
+                       sec.flags |= SEC_LEVEL;
+                       sec.level = SEC_LEVEL_1;
+               } else if (strcmp(ops->name, "TKIP") == 0) {
+                       sec.flags |= SEC_LEVEL;
+                       sec.level = SEC_LEVEL_2;
+               } else if (strcmp(ops->name, "CCMP") == 0) {
+                       sec.flags |= SEC_LEVEL;
+                       sec.level = SEC_LEVEL_3;
+               }
+       }
+ done:
+       if (ieee->set_security)
+               ieee->set_security(ieee->dev, &sec);
+
+       /* Do not reset port if card is in Managed mode since resetting will
+        * generate new IEEE 802.11 authentication which may end up in looping
+        * with IEEE 802.1X.  If your hardware requires a reset after WEP
+        * configuration (for example... Prism2), implement the reset_port in
+        * the callbacks structures used to initialize the 802.11 stack. */
+       if (ieee->reset_on_keychange &&
+           ieee->iw_mode != IW_MODE_INFRA &&
+           ieee->reset_port &&
+           ieee->reset_port(dev)) {
+               IPW_DEBUG_INFO("%s: reset_port failed\n", dev->name);
+               param->u.crypt.err = IPW2100_CRYPT_ERR_CARD_CONF_FAILED;
+               return -EINVAL;
+       }
+
+       return ret;
+}
+
+
+static int ipw2100_wpa_supplicant(struct net_device *dev, struct iw_point *p){
+
+       struct ipw2100_param *param;
+       int ret=0;
+
+       IPW_DEBUG_IOCTL("wpa_supplicant: len=%d\n", p->length);
+
+       if (p->length < sizeof(struct ipw2100_param) || !p->pointer)
+               return -EINVAL;
+
+       param = (struct ipw2100_param *)kmalloc(p->length, GFP_KERNEL);
+       if (param == NULL)
+               return -ENOMEM;
+
+       if (copy_from_user(param, p->pointer, p->length)){
+               kfree(param);
+               return -EFAULT;
+       }
+
+       switch (param->cmd){
+
+       case IPW2100_CMD_SET_WPA_PARAM:
+               ret = ipw2100_wpa_set_param(dev, param->u.wpa_param.name,
+                                           param->u.wpa_param.value);
+               break;
+
+       case IPW2100_CMD_SET_WPA_IE:
+               ret = ipw2100_wpa_set_wpa_ie(dev, param, p->length);
+               break;
+
+       case IPW2100_CMD_SET_ENCRYPTION:
+               ret = ipw2100_wpa_set_encryption(dev, param, p->length);
+               break;
+
+       case IPW2100_CMD_MLME:
+               ret = ipw2100_wpa_mlme(dev, param->u.mlme.command,
+                                      param->u.mlme.reason_code);
+               break;
+
+       default:
+               IPW_DEBUG_ERROR("%s: Unknown WPA supplicant request: %d\n",
+                               dev->name, param->cmd);
+               ret = -EOPNOTSUPP;
+
+       }
+
+       if (ret == 0 && copy_to_user(p->pointer, param, p->length))
+               ret = -EFAULT;
+
+       kfree(param);
+       return ret;
+}
+#endif /* CONFIG_IEEE80211_WPA */
+
+static int ipw2100_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+#ifdef CONFIG_IEEE80211_WPA
+       struct iwreq *wrq = (struct iwreq *) rq;
+       int ret=-1;
+       switch (cmd){
+           case IPW2100_IOCTL_WPA_SUPPLICANT:
+               ret = ipw2100_wpa_supplicant(dev, &wrq->u.data);
+               return ret;
+
+           default:
+               return -EOPNOTSUPP;
+       }
+
+#endif /* CONFIG_IEEE80211_WPA */
+
+       return -EOPNOTSUPP;
+}
+
+
+static void ipw_ethtool_get_drvinfo(struct net_device *dev,
+                                   struct ethtool_drvinfo *info)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       char fw_ver[64], ucode_ver[64];
+
+       strcpy(info->driver, DRV_NAME);
+       strcpy(info->version, DRV_VERSION);
+
+       ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
+       ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
+
+       snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
+                fw_ver, priv->eeprom_version, ucode_ver);
+
+       strcpy(info->bus_info, pci_name(priv->pci_dev));
+}
+
+static u32 ipw2100_ethtool_get_link(struct net_device *dev)
+{
+    struct ipw2100_priv *priv = ieee80211_priv(dev);
+    return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
+}
+
+
+static struct ethtool_ops ipw2100_ethtool_ops = {
+    .get_link        = ipw2100_ethtool_get_link,
+    .get_drvinfo     = ipw_ethtool_get_drvinfo,
+};
+
+static void ipw2100_hang_check(void *adapter)
+{
+       struct ipw2100_priv *priv = adapter;
+       unsigned long flags;
+       u32 rtc = 0xa5a5a5a5;
+       u32 len = sizeof(rtc);
+       int restart = 0;
+
+       spin_lock_irqsave(&priv->low_lock, flags);
+
+       if (priv->fatal_error != 0) {
+               /* If fatal_error is set then we need to restart */
+               IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
+                              priv->net_dev->name);
+
+               restart = 1;
+       } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
+                  (rtc == priv->last_rtc)) {
+               /* Check if firmware is hung */
+               IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
+                              priv->net_dev->name);
+
+               restart = 1;
+       }
+
+       if (restart) {
+               /* Kill timer */
+               priv->stop_hang_check = 1;
+               priv->hangs++;
+
+               /* Restart the NIC */
+               schedule_reset(priv);
+       }
+
+       priv->last_rtc = rtc;
+
+       if (!priv->stop_hang_check)
+               queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
+
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+}
+
+
+static void ipw2100_rf_kill(void *adapter)
+{
+       struct ipw2100_priv *priv = adapter;
+       unsigned long flags;
+
+       spin_lock_irqsave(&priv->low_lock, flags);
+
+       if (rf_kill_active(priv)) {
+               IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
+               if (!priv->stop_rf_kill)
+                       queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
+               goto exit_unlock;
+       }
+
+       /* RF Kill is now disabled, so bring the device back up */
+
+       if (!(priv->status & STATUS_RF_KILL_MASK)) {
+               IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
+                                 "device\n");
+               schedule_reset(priv);
+       } else
+               IPW_DEBUG_RF_KILL("HW RF Kill deactivated.  SW RF Kill still "
+                                 "enabled\n");
+
+ exit_unlock:
+       spin_unlock_irqrestore(&priv->low_lock, flags);
+}
+
+static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
+
+/* Look into using netdev destructor to shutdown ieee80211? */
+
+static struct net_device *ipw2100_alloc_device(
+       struct pci_dev *pci_dev,
+       char *base_addr,
+       unsigned long mem_start,
+       unsigned long mem_len)
+{
+       struct ipw2100_priv *priv;
+       struct net_device *dev;
+
+       dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
+       if (!dev)
+               return NULL;
+       priv = ieee80211_priv(dev);
+       priv->ieee = netdev_priv(dev);
+       priv->pci_dev = pci_dev;
+       priv->net_dev = dev;
+
+       priv->ieee->hard_start_xmit = ipw2100_tx;
+       priv->ieee->set_security = shim__set_security;
+
+       dev->open = ipw2100_open;
+       dev->stop = ipw2100_close;
+       dev->init = ipw2100_net_init;
+       dev->do_ioctl = ipw2100_ioctl;
+       dev->get_stats = ipw2100_stats;
+       dev->ethtool_ops = &ipw2100_ethtool_ops;
+       dev->tx_timeout = ipw2100_tx_timeout;
+       dev->wireless_handlers = &ipw2100_wx_handler_def;
+       dev->get_wireless_stats = ipw2100_wx_wireless_stats;
+       dev->set_mac_address = ipw2100_set_address;
+       dev->watchdog_timeo = 3*HZ;
+       dev->irq = 0;
+
+       dev->base_addr = (unsigned long)base_addr;
+       dev->mem_start = mem_start;
+       dev->mem_end = dev->mem_start + mem_len - 1;
+
+       /* NOTE: We don't use the wireless_handlers hook
+        * in dev as the system will start throwing WX requests
+        * to us before we're actually initialized and it just
+        * ends up causing problems.  So, we just handle
+        * the WX extensions through the ipw2100_ioctl interface */
+
+
+       /* memset() puts everything to 0, so we only have explicitely set
+        * those values that need to be something else */
+
+       /* If power management is turned on, default to AUTO mode */
+       priv->power_mode = IPW_POWER_AUTO;
+
+
+
+#ifdef CONFIG_IEEE80211_WPA
+       priv->ieee->wpa_enabled = 0;
+       priv->ieee->tkip_countermeasures = 0;
+       priv->ieee->drop_unencrypted = 0;
+       priv->ieee->privacy_invoked = 0;
+       priv->ieee->ieee802_1x = 1;
+#endif /* CONFIG_IEEE80211_WPA */
+
+       /* Set module parameters */
+       switch (mode) {
+       case 1:
+               priv->ieee->iw_mode = IW_MODE_ADHOC;
+               break;
+#ifdef CONFIG_IPW2100_MONITOR
+       case 2:
+               priv->ieee->iw_mode = IW_MODE_MONITOR;
+               break;
+#endif
+       default:
+       case 0:
+               priv->ieee->iw_mode = IW_MODE_INFRA;
+               break;
+       }
+
+       if (disable == 1)
+               priv->status |= STATUS_RF_KILL_SW;
+
+       if (channel != 0 &&
+           ((channel >= REG_MIN_CHANNEL) &&
+            (channel <= REG_MAX_CHANNEL))) {
+               priv->config |= CFG_STATIC_CHANNEL;
+               priv->channel = channel;
+       }
+
+       if (associate)
+               priv->config |= CFG_ASSOCIATE;
+
+       priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
+       priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
+       priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
+       priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
+       priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
+       priv->tx_power = IPW_TX_POWER_DEFAULT;
+       priv->tx_rates = DEFAULT_TX_RATES;
+
+       strcpy(priv->nick, "ipw2100");
+
+       spin_lock_init(&priv->low_lock);
+       sema_init(&priv->action_sem, 1);
+       sema_init(&priv->adapter_sem, 1);
+
+       init_waitqueue_head(&priv->wait_command_queue);
+
+       netif_carrier_off(dev);
+
+       INIT_LIST_HEAD(&priv->msg_free_list);
+       INIT_LIST_HEAD(&priv->msg_pend_list);
+       INIT_STAT(&priv->msg_free_stat);
+       INIT_STAT(&priv->msg_pend_stat);
+
+       INIT_LIST_HEAD(&priv->tx_free_list);
+       INIT_LIST_HEAD(&priv->tx_pend_list);
+       INIT_STAT(&priv->tx_free_stat);
+       INIT_STAT(&priv->tx_pend_stat);
+
+       INIT_LIST_HEAD(&priv->fw_pend_list);
+       INIT_STAT(&priv->fw_pend_stat);
+
+
+#ifdef CONFIG_SOFTWARE_SUSPEND2
+       priv->workqueue = create_workqueue(DRV_NAME, 0);
+#else
+       priv->workqueue = create_workqueue(DRV_NAME);
+#endif
+       INIT_WORK(&priv->reset_work,
+                 (void (*)(void *))ipw2100_reset_adapter, priv);
+       INIT_WORK(&priv->security_work,
+                 (void (*)(void *))ipw2100_security_work, priv);
+       INIT_WORK(&priv->wx_event_work,
+                 (void (*)(void *))ipw2100_wx_event_work, priv);
+       INIT_WORK(&priv->hang_check, ipw2100_hang_check, priv);
+       INIT_WORK(&priv->rf_kill, ipw2100_rf_kill, priv);
+
+       tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
+                    ipw2100_irq_tasklet, (unsigned long)priv);
+
+       /* NOTE:  We do not start the deferred work for status checks yet */
+       priv->stop_rf_kill = 1;
+       priv->stop_hang_check = 1;
+
+       return dev;
+}
+
+
+
+#define PCI_DMA_32BIT   0x00000000ffffffffULL
+
+static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
+                               const struct pci_device_id *ent)
+{
+       unsigned long mem_start, mem_len, mem_flags;
+       char *base_addr = NULL;
+       struct net_device *dev = NULL;
+       struct ipw2100_priv *priv = NULL;
+       int err = 0;
+       int registered = 0;
+       u32 val;
+
+       IPW_DEBUG_INFO("enter\n");
+
+       mem_start = pci_resource_start(pci_dev, 0);
+       mem_len = pci_resource_len(pci_dev, 0);
+       mem_flags = pci_resource_flags(pci_dev, 0);
+
+       if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
+               IPW_DEBUG_INFO("weird - resource type is not memory\n");
+               err = -ENODEV;
+               goto fail;
+       }
+
+       base_addr = ioremap_nocache(mem_start, mem_len);
+       if (!base_addr) {
+               printk(KERN_WARNING DRV_NAME
+                      "Error calling ioremap_nocache.\n");
+               err = -EIO;
+               goto fail;
+       }
+
+       /* allocate and initialize our net_device */
+       dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
+       if (!dev) {
+               printk(KERN_WARNING DRV_NAME
+                      "Error calling ipw2100_alloc_device.\n");
+               err = -ENOMEM;
+               goto fail;
+       }
+
+       /* set up PCI mappings for device */
+       err = pci_enable_device(pci_dev);
+       if (err) {
+               printk(KERN_WARNING DRV_NAME
+                      "Error calling pci_enable_device.\n");
+               return err;
+       }
+
+       priv = ieee80211_priv(dev);
+
+       pci_set_master(pci_dev);
+       pci_set_drvdata(pci_dev, priv);
+
+       err = pci_set_dma_mask(pci_dev, PCI_DMA_32BIT);
+       if (err) {
+               printk(KERN_WARNING DRV_NAME
+                      "Error calling pci_set_dma_mask.\n");
+               pci_disable_device(pci_dev);
+               return err;
+       }
+
+       err = pci_request_regions(pci_dev, DRV_NAME);
+       if (err) {
+               printk(KERN_WARNING DRV_NAME
+                      "Error calling pci_request_regions.\n");
+               pci_disable_device(pci_dev);
+               return err;
+       }
+
+        /* We disable the RETRY_TIMEOUT register (0x41) to keep
+        * PCI Tx retries from interfering with C3 CPU state */
+       pci_read_config_dword(pci_dev, 0x40, &val);
+       if ((val & 0x0000ff00) != 0)
+               pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
+
+       pci_set_power_state(pci_dev, 0);
+
+       if (!ipw2100_hw_is_adapter_in_system(dev)) {
+               printk(KERN_WARNING DRV_NAME
+                      "Device not found via register read.\n");
+               err = -ENODEV;
+               goto fail;
+       }
+
+       SET_NETDEV_DEV(dev, &pci_dev->dev);
+
+       /* Force interrupts to be shut off on the device */
+       priv->status |= STATUS_INT_ENABLED;
+       ipw2100_disable_interrupts(priv);
+
+       /* Allocate and initialize the Tx/Rx queues and lists */
+       if (ipw2100_queues_allocate(priv)) {
+               printk(KERN_WARNING DRV_NAME
+                      "Error calilng ipw2100_queues_allocate.\n");
+               err = -ENOMEM;
+               goto fail;
+       }
+       ipw2100_queues_initialize(priv);
+
+       err = request_irq(pci_dev->irq,
+                         ipw2100_interrupt, SA_SHIRQ,
+                         dev->name, priv);
+       if (err) {
+               printk(KERN_WARNING DRV_NAME
+                      "Error calling request_irq: %d.\n",
+                      pci_dev->irq);
+               goto fail;
+       }
+       dev->irq = pci_dev->irq;
+
+       IPW_DEBUG_INFO("Attempting to register device...\n");
+
+       SET_MODULE_OWNER(dev);
+
+       printk(KERN_INFO DRV_NAME
+              ": Detected Intel PRO/Wireless 2100 Network Connection\n");
+
+       /* Bring up the interface.  Pre 0.46, after we registered the
+        * network device we would call ipw2100_up.  This introduced a race
+        * condition with newer hotplug configurations (network was coming
+        * up and making calls before the device was initialized).
+        *
+        * If we called ipw2100_up before we registered the device, then the
+        * device name wasn't registered.  So, we instead use the net_dev->init
+        * member to call a function that then just turns and calls ipw2100_up.
+        * net_dev->init is called after name allocation but before the
+        * notifier chain is called */
+       down(&priv->action_sem);
+       err = register_netdev(dev);
+       if (err) {
+               printk(KERN_WARNING DRV_NAME
+                      "Error calling register_netdev.\n");
+               goto fail_unlock;
+       }
+       registered = 1;
+
+       IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
+
+       /* perform this after register_netdev so that dev->name is set */
+       sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+       netif_carrier_off(dev);
+
+       /* If the RF Kill switch is disabled, go ahead and complete the
+        * startup sequence */
+       if (!(priv->status & STATUS_RF_KILL_MASK)) {
+               /* Enable the adapter - sends HOST_COMPLETE */
+               if (ipw2100_enable_adapter(priv)) {
+                       printk(KERN_WARNING DRV_NAME
+                              ": %s: failed in call to enable adapter.\n",
+                              priv->net_dev->name);
+                       ipw2100_hw_stop_adapter(priv);
+                       err = -EIO;
+                       goto fail_unlock;
+               }
+
+               /* Start a scan . . . */
+               ipw2100_set_scan_options(priv);
+               ipw2100_start_scan(priv);
+       }
+
+       IPW_DEBUG_INFO("exit\n");
+
+       priv->status |= STATUS_INITIALIZED;
+
+       up(&priv->action_sem);
+
+       return 0;
+
+ fail_unlock:
+       up(&priv->action_sem);
+
+ fail:
+       if (dev) {
+               if (registered)
+                       unregister_netdev(dev);
+
+               ipw2100_hw_stop_adapter(priv);
+
+               ipw2100_disable_interrupts(priv);
+
+               if (dev->irq)
+                       free_irq(dev->irq, priv);
+
+               ipw2100_kill_workqueue(priv);
+
+               /* These are safe to call even if they weren't allocated */
+               ipw2100_queues_free(priv);
+               sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+
+               free_ieee80211(dev);
+               pci_set_drvdata(pci_dev, NULL);
+       }
+
+       if (base_addr)
+               iounmap((char*)base_addr);
+
+       pci_release_regions(pci_dev);
+       pci_disable_device(pci_dev);
+
+       return err;
+}
+
+static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
+{
+       struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+       struct net_device *dev;
+
+       if (priv) {
+               down(&priv->action_sem);
+
+               priv->status &= ~STATUS_INITIALIZED;
+
+               dev = priv->net_dev;
+               sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
+
+#ifdef CONFIG_PM
+               if (ipw2100_firmware.version)
+                       ipw2100_release_firmware(priv, &ipw2100_firmware);
+#endif
+               /* Take down the hardware */
+               ipw2100_down(priv);
+
+               /* Release the semaphore so that the network subsystem can
+                * complete any needed calls into the driver... */
+               up(&priv->action_sem);
+
+               /* Unregister the device first - this results in close()
+                * being called if the device is open.  If we free storage
+                * first, then close() will crash. */
+               unregister_netdev(dev);
+
+               /* ipw2100_down will ensure that there is no more pending work
+                * in the workqueue's, so we can safely remove them now. */
+               ipw2100_kill_workqueue(priv);
+
+               ipw2100_queues_free(priv);
+
+               /* Free potential debugging firmware snapshot */
+               ipw2100_snapshot_free(priv);
+
+               if (dev->irq)
+                       free_irq(dev->irq, priv);
+
+               if (dev->base_addr)
+                       iounmap((unsigned char *)dev->base_addr);
+
+               free_ieee80211(dev);
+       }
+
+       pci_release_regions(pci_dev);
+       pci_disable_device(pci_dev);
+
+       IPW_DEBUG_INFO("exit\n");
+}
+
+
+#ifdef CONFIG_PM
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+static int ipw2100_suspend(struct pci_dev *pci_dev, u32 state)
+#else
+static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
+#endif
+{
+       struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+       struct net_device *dev = priv->net_dev;
+
+       IPW_DEBUG_INFO("%s: Going into suspend...\n",
+              dev->name);
+
+       down(&priv->action_sem);
+       if (priv->status & STATUS_INITIALIZED) {
+               /* Take down the device; powers it off, etc. */
+               ipw2100_down(priv);
+       }
+
+       /* Remove the PRESENT state of the device */
+       netif_device_detach(dev);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+       pci_save_state(pci_dev, priv->pm_state);
+#else
+       pci_save_state(pci_dev);
+#endif
+       pci_disable_device (pci_dev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+       pci_set_power_state(pci_dev, state);
+#else
+       pci_set_power_state(pci_dev, PCI_D3hot);
+#endif
+
+       up(&priv->action_sem);
+
+       return 0;
+}
+
+static int ipw2100_resume(struct pci_dev *pci_dev)
+{
+       struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
+       struct net_device *dev = priv->net_dev;
+       u32 val;
+
+       if (IPW2100_PM_DISABLED)
+               return 0;
+
+       down(&priv->action_sem);
+
+       IPW_DEBUG_INFO("%s: Coming out of suspend...\n",
+              dev->name);
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
+       pci_set_power_state(pci_dev, 0);
+#else
+       pci_set_power_state(pci_dev, PCI_D0);
+#endif
+       pci_enable_device(pci_dev);
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+       pci_restore_state(pci_dev, priv->pm_state);
+#else
+       pci_restore_state(pci_dev);
+#endif
+
+       /*
+        * Suspend/Resume resets the PCI configuration space, so we have to
+        * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
+        * from interfering with C3 CPU state. pci_restore_state won't help
+        * here since it only restores the first 64 bytes pci config header.
+        */
+       pci_read_config_dword(pci_dev, 0x40, &val);
+       if ((val & 0x0000ff00) != 0)
+               pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
+
+       /* Set the device back into the PRESENT state; this will also wake
+        * the queue of needed */
+       netif_device_attach(dev);
+
+        /* Bring the device back up */
+        if (!(priv->status & STATUS_RF_KILL_SW))
+                ipw2100_up(priv, 0);
+
+       up(&priv->action_sem);
+
+       return 0;
+}
+#endif
+
+
+#define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
+
+static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
+       IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
+       IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
+       IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
+       IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
+       IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
+       IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
+
+       IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
+
+       IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
+       IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
+       IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
+       IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
+       IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
+       IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
+       IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
+
+       IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
+
+       IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
+
+       IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
+       IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
+       IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
+
+       IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
+       {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
+
+static struct pci_driver ipw2100_pci_driver = {
+       .name = DRV_NAME,
+       .id_table = ipw2100_pci_id_table,
+       .probe = ipw2100_pci_init_one,
+       .remove = __devexit_p(ipw2100_pci_remove_one),
+#ifdef CONFIG_PM
+       .suspend = ipw2100_suspend,
+       .resume = ipw2100_resume,
+#endif
+};
+
+
+/**
+ * Initialize the ipw2100 driver/module
+ *
+ * @returns 0 if ok, < 0 errno node con error.
+ *
+ * Note: we cannot init the /proc stuff until the PCI driver is there,
+ * or we risk an unlikely race condition on someone accessing
+ * uninitialized data in the PCI dev struct through /proc.
+ */
+static int __init ipw2100_init(void)
+{
+       int ret;
+
+       printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
+       printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
+
+#ifdef CONFIG_IEEE80211_NOWEP
+       IPW_DEBUG_INFO(DRV_NAME ": Compiled with WEP disabled.\n");
+#endif
+
+       ret = pci_module_init(&ipw2100_pci_driver);
+
+#ifdef CONFIG_IPW_DEBUG
+       ipw2100_debug_level = debug;
+       driver_create_file(&ipw2100_pci_driver.driver,
+                          &driver_attr_debug_level);
+#endif
+
+       return ret;
+}
+
+
+/**
+ * Cleanup ipw2100 driver registration
+ */
+static void __exit ipw2100_exit(void)
+{
+       /* FIXME: IPG: check that we have no instances of the devices open */
+#ifdef CONFIG_IPW_DEBUG
+       driver_remove_file(&ipw2100_pci_driver.driver,
+                          &driver_attr_debug_level);
+#endif
+       pci_unregister_driver(&ipw2100_pci_driver);
+}
+
+module_init(ipw2100_init);
+module_exit(ipw2100_exit);
+
+#define WEXT_USECHANNELS 1
+
+const long ipw2100_frequencies[] = {
+       2412, 2417, 2422, 2427,
+       2432, 2437, 2442, 2447,
+       2452, 2457, 2462, 2467,
+       2472, 2484
+};
+
+#define FREQ_COUNT (sizeof(ipw2100_frequencies) / \
+                    sizeof(ipw2100_frequencies[0]))
+
+const long ipw2100_rates_11b[] = {
+       1000000,
+       2000000,
+       5500000,
+       11000000
+};
+
+#define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0]))
+
+static int ipw2100_wx_get_name(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       if (!(priv->status & STATUS_ASSOCIATED))
+               strcpy(wrqu->name, "unassociated");
+       else
+               snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
+
+       IPW_DEBUG_WX("Name: %s\n", wrqu->name);
+       return 0;
+}
+
+
+static int ipw2100_wx_set_freq(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       struct iw_freq *fwrq = &wrqu->freq;
+       int err = 0;
+
+       if (priv->ieee->iw_mode == IW_MODE_INFRA)
+               return -EOPNOTSUPP;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       /* if setting by freq convert to channel */
+       if (fwrq->e == 1) {
+               if ((fwrq->m >= (int) 2.412e8 &&
+                    fwrq->m <= (int) 2.487e8)) {
+                       int f = fwrq->m / 100000;
+                       int c = 0;
+
+                       while ((c < REG_MAX_CHANNEL) &&
+                              (f != ipw2100_frequencies[c]))
+                               c++;
+
+                       /* hack to fall through */
+                       fwrq->e = 0;
+                       fwrq->m = c + 1;
+               }
+       }
+
+       if (fwrq->e > 0 || fwrq->m > 1000)
+               return -EOPNOTSUPP;
+       else { /* Set the channel */
+               IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
+               err = ipw2100_set_channel(priv, fwrq->m, 0);
+       }
+
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+
+static int ipw2100_wx_get_freq(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       wrqu->freq.e = 0;
+
+       /* If we are associated, trying to associate, or have a statically
+        * configured CHANNEL then return that; otherwise return ANY */
+       if (priv->config & CFG_STATIC_CHANNEL ||
+           priv->status & STATUS_ASSOCIATED)
+               wrqu->freq.m = priv->channel;
+       else
+               wrqu->freq.m = 0;
+
+       IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
+       return 0;
+
+}
+
+static int ipw2100_wx_set_mode(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int err = 0;
+
+       IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
+
+       if (wrqu->mode == priv->ieee->iw_mode)
+               return 0;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       switch (wrqu->mode) {
+#ifdef CONFIG_IPW2100_MONITOR
+       case IW_MODE_MONITOR:
+               err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
+               break;
+#endif /* CONFIG_IPW2100_MONITOR */
+       case IW_MODE_ADHOC:
+               err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
+               break;
+       case IW_MODE_INFRA:
+       case IW_MODE_AUTO:
+       default:
+               err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
+               break;
+       }
+
+done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_get_mode(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       wrqu->mode = priv->ieee->iw_mode;
+       IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
+
+       return 0;
+}
+
+
+#define POWER_MODES 5
+
+/* Values are in microsecond */
+const s32 timeout_duration[POWER_MODES] = {
+       350000,
+       250000,
+       75000,
+       37000,
+       25000,
+};
+
+const s32 period_duration[POWER_MODES] = {
+       400000,
+       700000,
+       1000000,
+       1000000,
+       1000000
+};
+
+static int ipw2100_wx_get_range(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       struct iw_range *range = (struct iw_range *)extra;
+       u16 val;
+       int i, level;
+
+       wrqu->data.length = sizeof(*range);
+       memset(range, 0, sizeof(*range));
+
+       /* Let's try to keep this struct in the same order as in
+        * linux/include/wireless.h
+        */
+
+       /* TODO: See what values we can set, and remove the ones we can't
+        * set, or fill them with some default data.
+        */
+
+       /* ~5 Mb/s real (802.11b) */
+       range->throughput = 5 * 1000 * 1000;
+
+//     range->sensitivity;     /* signal level threshold range */
+
+       range->max_qual.qual = 100;
+       /* TODO: Find real max RSSI and stick here */
+       range->max_qual.level = 0;
+       range->max_qual.noise = 0;
+       range->max_qual.updated = 7; /* Updated all three */
+
+       range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
+       /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+       range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
+       range->avg_qual.noise = 0;
+       range->avg_qual.updated = 7; /* Updated all three */
+
+       range->num_bitrates = RATE_COUNT;
+
+       for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
+               range->bitrate[i] = ipw2100_rates_11b[i];
+       }
+
+       range->min_rts = MIN_RTS_THRESHOLD;
+       range->max_rts = MAX_RTS_THRESHOLD;
+       range->min_frag = MIN_FRAG_THRESHOLD;
+       range->max_frag = MAX_FRAG_THRESHOLD;
+
+       range->min_pmp = period_duration[0];    /* Minimal PM period */
+       range->max_pmp = period_duration[POWER_MODES-1];/* Maximal PM period */
+       range->min_pmt = timeout_duration[POWER_MODES-1];       /* Minimal PM timeout */
+       range->max_pmt = timeout_duration[0];/* Maximal PM timeout */
+
+        /* How to decode max/min PM period */
+       range->pmp_flags = IW_POWER_PERIOD;
+        /* How to decode max/min PM period */
+       range->pmt_flags = IW_POWER_TIMEOUT;
+       /* What PM options are supported */
+       range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
+
+       range->encoding_size[0] = 5;
+       range->encoding_size[1] = 13;           /* Different token sizes */
+       range->num_encoding_sizes = 2;          /* Number of entry in the list */
+       range->max_encoding_tokens = WEP_KEYS;  /* Max number of tokens */
+//     range->encoding_login_index;            /* token index for login token */
+
+       if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
+               range->txpower_capa = IW_TXPOW_DBM;
+               range->num_txpower = IW_MAX_TXPOWER;
+               for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); i < IW_MAX_TXPOWER;
+                    i++, level -= ((IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM) * 16) /
+                            (IW_MAX_TXPOWER - 1))
+                       range->txpower[i] = level / 16;
+       } else {
+               range->txpower_capa = 0;
+               range->num_txpower = 0;
+       }
+
+
+       /* Set the Wireless Extension versions */
+       range->we_version_compiled = WIRELESS_EXT;
+       range->we_version_source = 16;
+
+//     range->retry_capa;      /* What retry options are supported */
+//     range->retry_flags;     /* How to decode max/min retry limit */
+//     range->r_time_flags;    /* How to decode max/min retry life */
+//     range->min_retry;       /* Minimal number of retries */
+//     range->max_retry;       /* Maximal number of retries */
+//     range->min_r_time;      /* Minimal retry lifetime */
+//     range->max_r_time;      /* Maximal retry lifetime */
+
+        range->num_channels = FREQ_COUNT;
+
+       val = 0;
+       for (i = 0; i < FREQ_COUNT; i++) {
+               // TODO: Include only legal frequencies for some countries
+//             if (local->channel_mask & (1 << i)) {
+                       range->freq[val].i = i + 1;
+                       range->freq[val].m = ipw2100_frequencies[i] * 100000;
+                       range->freq[val].e = 1;
+                       val++;
+//             }
+               if (val == IW_MAX_FREQUENCIES)
+               break;
+       }
+       range->num_frequency = val;
+
+       IPW_DEBUG_WX("GET Range\n");
+
+       return 0;
+}
+
+static int ipw2100_wx_set_wap(struct net_device *dev,
+                             struct iw_request_info *info,
+                             union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int err = 0;
+
+       static const unsigned char any[] = {
+               0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+       };
+       static const unsigned char off[] = {
+               0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+       };
+
+       // sanity checks
+       if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
+               return -EINVAL;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
+           !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
+               /* we disable mandatory BSSID association */
+               IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
+               priv->config &= ~CFG_STATIC_BSSID;
+               err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
+               goto done;
+       }
+
+       priv->config |= CFG_STATIC_BSSID;
+       memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
+
+       err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
+
+       IPW_DEBUG_WX("SET BSSID -> %02X:%02X:%02X:%02X:%02X:%02X\n",
+                    wrqu->ap_addr.sa_data[0] & 0xff,
+                    wrqu->ap_addr.sa_data[1] & 0xff,
+                    wrqu->ap_addr.sa_data[2] & 0xff,
+                    wrqu->ap_addr.sa_data[3] & 0xff,
+                    wrqu->ap_addr.sa_data[4] & 0xff,
+                    wrqu->ap_addr.sa_data[5] & 0xff);
+
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_get_wap(struct net_device *dev,
+                             struct iw_request_info *info,
+                             union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       /* If we are associated, trying to associate, or have a statically
+        * configured BSSID then return that; otherwise return ANY */
+       if (priv->config & CFG_STATIC_BSSID ||
+           priv->status & STATUS_ASSOCIATED) {
+               wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+               memcpy(wrqu->ap_addr.sa_data, &priv->bssid, ETH_ALEN);
+       } else
+               memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
+
+       IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n",
+                    MAC_ARG(wrqu->ap_addr.sa_data));
+       return 0;
+}
+
+static int ipw2100_wx_set_essid(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       char *essid = ""; /* ANY */
+       int length = 0;
+       int err = 0;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       if (wrqu->essid.flags && wrqu->essid.length) {
+               length = wrqu->essid.length - 1;
+               essid = extra;
+       }
+
+       if (length == 0) {
+               IPW_DEBUG_WX("Setting ESSID to ANY\n");
+               priv->config &= ~CFG_STATIC_ESSID;
+               err = ipw2100_set_essid(priv, NULL, 0, 0);
+               goto done;
+       }
+
+       length = min(length, IW_ESSID_MAX_SIZE);
+
+       priv->config |= CFG_STATIC_ESSID;
+
+       if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
+               IPW_DEBUG_WX("ESSID set to current ESSID.\n");
+               err = 0;
+               goto done;
+       }
+
+       IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length),
+                    length);
+
+       priv->essid_len = length;
+       memcpy(priv->essid, essid, priv->essid_len);
+
+       err = ipw2100_set_essid(priv, essid, length, 0);
+
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_get_essid(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       /* If we are associated, trying to associate, or have a statically
+        * configured ESSID then return that; otherwise return ANY */
+       if (priv->config & CFG_STATIC_ESSID ||
+           priv->status & STATUS_ASSOCIATED) {
+               IPW_DEBUG_WX("Getting essid: '%s'\n",
+                            escape_essid(priv->essid, priv->essid_len));
+               memcpy(extra, priv->essid, priv->essid_len);
+               wrqu->essid.length = priv->essid_len;
+               wrqu->essid.flags = 1; /* active */
+       } else {
+               IPW_DEBUG_WX("Getting essid: ANY\n");
+               wrqu->essid.length = 0;
+               wrqu->essid.flags = 0; /* active */
+       }
+
+       return 0;
+}
+
+static int ipw2100_wx_set_nick(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       if (wrqu->data.length > IW_ESSID_MAX_SIZE)
+               return -E2BIG;
+
+       wrqu->data.length = min((size_t)wrqu->data.length, sizeof(priv->nick));
+       memset(priv->nick, 0, sizeof(priv->nick));
+       memcpy(priv->nick, extra,  wrqu->data.length);
+
+       IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
+
+       return 0;
+}
+
+static int ipw2100_wx_get_nick(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       wrqu->data.length = strlen(priv->nick) + 1;
+       memcpy(extra, priv->nick, wrqu->data.length);
+       wrqu->data.flags = 1; /* active */
+
+       IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
+
+       return 0;
+}
+
+static int ipw2100_wx_set_rate(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       u32 target_rate = wrqu->bitrate.value;
+       u32 rate;
+       int err = 0;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       rate = 0;
+
+       if (target_rate == 1000000 ||
+           (!wrqu->bitrate.fixed && target_rate > 1000000))
+               rate |= TX_RATE_1_MBIT;
+       if (target_rate == 2000000 ||
+           (!wrqu->bitrate.fixed && target_rate > 2000000))
+               rate |= TX_RATE_2_MBIT;
+       if (target_rate == 5500000 ||
+           (!wrqu->bitrate.fixed && target_rate > 5500000))
+               rate |= TX_RATE_5_5_MBIT;
+       if (target_rate == 11000000 ||
+           (!wrqu->bitrate.fixed && target_rate > 11000000))
+               rate |= TX_RATE_11_MBIT;
+       if (rate == 0)
+               rate = DEFAULT_TX_RATES;
+
+       err = ipw2100_set_tx_rates(priv, rate, 0);
+
+       IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+
+static int ipw2100_wx_get_rate(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int val;
+       int len = sizeof(val);
+       int err = 0;
+
+       if (!(priv->status & STATUS_ENABLED) ||
+           priv->status & STATUS_RF_KILL_MASK ||
+           !(priv->status & STATUS_ASSOCIATED)) {
+               wrqu->bitrate.value = 0;
+               return 0;
+       }
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
+       if (err) {
+               IPW_DEBUG_WX("failed querying ordinals.\n");
+               return err;
+       }
+
+       switch (val & TX_RATE_MASK) {
+       case TX_RATE_1_MBIT:
+               wrqu->bitrate.value = 1000000;
+               break;
+       case TX_RATE_2_MBIT:
+               wrqu->bitrate.value = 2000000;
+               break;
+       case TX_RATE_5_5_MBIT:
+               wrqu->bitrate.value = 5500000;
+               break;
+       case TX_RATE_11_MBIT:
+               wrqu->bitrate.value = 11000000;
+               break;
+       default:
+               wrqu->bitrate.value = 0;
+       }
+
+       IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
+
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_set_rts(struct net_device *dev,
+                             struct iw_request_info *info,
+                             union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int value, err;
+
+       /* Auto RTS not yet supported */
+       if (wrqu->rts.fixed == 0)
+               return -EINVAL;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       if (wrqu->rts.disabled)
+               value = priv->rts_threshold | RTS_DISABLED;
+       else {
+               if (wrqu->rts.value < 1 ||
+                   wrqu->rts.value > 2304) {
+                       err = -EINVAL;
+                       goto done;
+               }
+               value = wrqu->rts.value;
+       }
+
+       err = ipw2100_set_rts_threshold(priv, value);
+
+       IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_get_rts(struct net_device *dev,
+                             struct iw_request_info *info,
+                             union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
+       wrqu->rts.fixed = 1; /* no auto select */
+
+       /* If RTS is set to the default value, then it is disabled */
+       wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
+
+       IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
+
+       return 0;
+}
+
+static int ipw2100_wx_set_txpow(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int err = 0, value;
+
+       if (priv->ieee->iw_mode != IW_MODE_ADHOC)
+               return -EINVAL;
+
+       if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0)
+               value = IPW_TX_POWER_DEFAULT;
+       else {
+               if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
+                   wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
+                       return -EINVAL;
+
+               value = (wrqu->txpower.value - IPW_TX_POWER_MIN_DBM) * 16 /
+                       (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
+       }
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       err = ipw2100_set_tx_power(priv, value);
+
+       IPW_DEBUG_WX("SET TX Power -> %d \n", value);
+
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_get_txpow(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       if (priv->ieee->iw_mode != IW_MODE_ADHOC) {
+               wrqu->power.disabled = 1;
+               return 0;
+       }
+
+       if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
+               wrqu->power.fixed = 0;
+               wrqu->power.value = IPW_TX_POWER_MAX_DBM;
+               wrqu->power.disabled = 1;
+       } else {
+               wrqu->power.disabled = 0;
+               wrqu->power.fixed = 1;
+               wrqu->power.value =
+                       (priv->tx_power *
+                        (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM)) /
+                       (IPW_TX_POWER_MAX - IPW_TX_POWER_MIN) +
+                       IPW_TX_POWER_MIN_DBM;
+       }
+
+       wrqu->power.flags = IW_TXPOW_DBM;
+
+       IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value);
+
+       return 0;
+}
+
+static int ipw2100_wx_set_frag(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       if (!wrqu->frag.fixed)
+               return -EINVAL;
+
+       if (wrqu->frag.disabled) {
+               priv->frag_threshold |= FRAG_DISABLED;
+               priv->ieee->fts = DEFAULT_FTS;
+       } else {
+               if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
+                   wrqu->frag.value > MAX_FRAG_THRESHOLD)
+                       return -EINVAL;
+
+               priv->ieee->fts = wrqu->frag.value & ~0x1;
+               priv->frag_threshold = priv->ieee->fts;
+       }
+
+       IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
+
+       return 0;
+}
+
+static int ipw2100_wx_get_frag(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
+       wrqu->frag.fixed = 0;   /* no auto select */
+       wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
+
+       IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
+
+       return 0;
+}
+
+static int ipw2100_wx_set_retry(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int err = 0;
+
+       if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
+           wrqu->retry.disabled)
+               return -EINVAL;
+
+       if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
+               return 0;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       if (wrqu->retry.flags & IW_RETRY_MIN) {
+               err = ipw2100_set_short_retry(priv, wrqu->retry.value);
+               IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
+                      wrqu->retry.value);
+               goto done;
+       }
+
+       if (wrqu->retry.flags & IW_RETRY_MAX) {
+               err = ipw2100_set_long_retry(priv, wrqu->retry.value);
+               IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
+                      wrqu->retry.value);
+               goto done;
+       }
+
+       err = ipw2100_set_short_retry(priv, wrqu->retry.value);
+       if (!err)
+               err = ipw2100_set_long_retry(priv, wrqu->retry.value);
+
+       IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
+
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_get_retry(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       wrqu->retry.disabled = 0; /* can't be disabled */
+
+       if ((wrqu->retry.flags & IW_RETRY_TYPE) ==
+           IW_RETRY_LIFETIME)
+               return -EINVAL;
+
+       if (wrqu->retry.flags & IW_RETRY_MAX) {
+               wrqu->retry.flags = IW_RETRY_LIMIT & IW_RETRY_MAX;
+               wrqu->retry.value = priv->long_retry_limit;
+       } else {
+               wrqu->retry.flags =
+                   (priv->short_retry_limit !=
+                    priv->long_retry_limit) ?
+                   IW_RETRY_LIMIT & IW_RETRY_MIN : IW_RETRY_LIMIT;
+
+               wrqu->retry.value = priv->short_retry_limit;
+       }
+
+       IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
+
+       return 0;
+}
+
+static int ipw2100_wx_set_scan(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int err = 0;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       IPW_DEBUG_WX("Initiating scan...\n");
+       if (ipw2100_set_scan_options(priv) ||
+           ipw2100_start_scan(priv)) {
+               IPW_DEBUG_WX("Start scan failed.\n");
+
+               /* TODO: Mark a scan as pending so when hardware initialized
+                *       a scan starts */
+       }
+
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_get_scan(struct net_device *dev,
+                              struct iw_request_info *info,
+                              union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
+}
+
+
+/*
+ * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
+ */
+static int ipw2100_wx_set_encode(struct net_device *dev,
+                                struct iw_request_info *info,
+                                union iwreq_data *wrqu, char *key)
+{
+       /*
+        * No check of STATUS_INITIALIZED required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
+}
+
+static int ipw2100_wx_get_encode(struct net_device *dev,
+                                struct iw_request_info *info,
+                                union iwreq_data *wrqu, char *key)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
+}
+
+static int ipw2100_wx_set_power(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int err = 0;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       if (wrqu->power.disabled) {
+               priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
+               err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
+               IPW_DEBUG_WX("SET Power Management Mode -> off\n");
+               goto done;
+       }
+
+       switch (wrqu->power.flags & IW_POWER_MODE) {
+       case IW_POWER_ON:    /* If not specified */
+       case IW_POWER_MODE:  /* If set all mask */
+       case IW_POWER_ALL_R: /* If explicitely state all */
+               break;
+       default: /* Otherwise we don't support it */
+               IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
+                            wrqu->power.flags);
+               err = -EOPNOTSUPP;
+               goto done;
+       }
+
+       /* If the user hasn't specified a power management mode yet, default
+        * to BATTERY */
+       priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
+       err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
+
+       IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n",
+                    priv->power_mode);
+
+ done:
+       up(&priv->action_sem);
+       return err;
+
+}
+
+static int ipw2100_wx_get_power(struct net_device *dev,
+                               struct iw_request_info *info,
+                               union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       if (!(priv->power_mode & IPW_POWER_ENABLED)) {
+               wrqu->power.disabled = 1;
+       } else {
+               wrqu->power.disabled = 0;
+               wrqu->power.flags = 0;
+       }
+
+       IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
+
+       return 0;
+}
+
+
+/*
+ *
+ * IWPRIV handlers
+ *
+ */
+#ifdef CONFIG_IPW2100_MONITOR
+static int ipw2100_wx_set_promisc(struct net_device *dev,
+                                 struct iw_request_info *info,
+                                 union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int *parms = (int *)extra;
+       int enable = (parms[0] > 0);
+       int err = 0;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       if (enable) {
+               if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
+                       err = ipw2100_set_channel(priv, parms[1], 0);
+                       goto done;
+               }
+               priv->channel = parms[1];
+               err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
+       } else {
+               if (priv->ieee->iw_mode == IW_MODE_MONITOR)
+                       err = ipw2100_switch_mode(priv, priv->last_mode);
+       }
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_reset(struct net_device *dev,
+                           struct iw_request_info *info,
+                           union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       if (priv->status & STATUS_INITIALIZED)
+               schedule_reset(priv);
+       return 0;
+}
+
+#endif
+
+static int ipw2100_wx_set_powermode(struct net_device *dev,
+                                   struct iw_request_info *info,
+                                   union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int err = 0, mode = *(int *)extra;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       if ((mode < 1) || (mode > POWER_MODES))
+               mode = IPW_POWER_AUTO;
+
+       if (priv->power_mode != mode)
+               err = ipw2100_set_power_mode(priv, mode);
+ done:
+       up(&priv->action_sem);
+       return err;
+}
+
+#define MAX_POWER_STRING 80
+static int ipw2100_wx_get_powermode(struct net_device *dev,
+                                   struct iw_request_info *info,
+                                   union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int level = IPW_POWER_LEVEL(priv->power_mode);
+       s32 timeout, period;
+
+       if (!(priv->power_mode & IPW_POWER_ENABLED)) {
+               snprintf(extra, MAX_POWER_STRING,
+                        "Power save level: %d (Off)", level);
+       } else {
+               switch (level) {
+               case IPW_POWER_MODE_CAM:
+                       snprintf(extra, MAX_POWER_STRING,
+                                "Power save level: %d (None)", level);
+                       break;
+               case IPW_POWER_AUTO:
+               snprintf(extra, MAX_POWER_STRING,
+                        "Power save level: %d (Auto)", 0);
+                       break;
+               default:
+                       timeout = timeout_duration[level - 1] / 1000;
+                       period = period_duration[level - 1] / 1000;
+                       snprintf(extra, MAX_POWER_STRING,
+                                "Power save level: %d "
+                                "(Timeout %dms, Period %dms)",
+                                level, timeout, period);
+               }
+       }
+
+       wrqu->data.length = strlen(extra) + 1;
+
+       return 0;
+}
+
+
+static int ipw2100_wx_set_preamble(struct net_device *dev,
+                                  struct iw_request_info *info,
+                                  union iwreq_data *wrqu, char *extra)
+{
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       int err, mode = *(int *)extra;
+
+       down(&priv->action_sem);
+       if (!(priv->status & STATUS_INITIALIZED)) {
+               err = -EIO;
+               goto done;
+       }
+
+       if (mode == 1)
+               priv->config |= CFG_LONG_PREAMBLE;
+       else if (mode == 0)
+               priv->config &= ~CFG_LONG_PREAMBLE;
+       else {
+               err = -EINVAL;
+               goto done;
+       }
+
+       err = ipw2100_system_config(priv, 0);
+
+done:
+       up(&priv->action_sem);
+       return err;
+}
+
+static int ipw2100_wx_get_preamble(struct net_device *dev,
+                                   struct iw_request_info *info,
+                                   union iwreq_data *wrqu, char *extra)
+{
+       /*
+        * This can be called at any time.  No action lock required
+        */
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+
+       if (priv->config & CFG_LONG_PREAMBLE)
+               snprintf(wrqu->name, IFNAMSIZ, "long (1)");
+       else
+               snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
+
+       return 0;
+}
+
+static iw_handler ipw2100_wx_handlers[] =
+{
+        NULL,                     /* SIOCSIWCOMMIT */
+        ipw2100_wx_get_name,      /* SIOCGIWNAME */
+        NULL,                     /* SIOCSIWNWID */
+        NULL,                     /* SIOCGIWNWID */
+        ipw2100_wx_set_freq,      /* SIOCSIWFREQ */
+        ipw2100_wx_get_freq,      /* SIOCGIWFREQ */
+        ipw2100_wx_set_mode,      /* SIOCSIWMODE */
+        ipw2100_wx_get_mode,      /* SIOCGIWMODE */
+        NULL,                     /* SIOCSIWSENS */
+        NULL,                     /* SIOCGIWSENS */
+        NULL,                     /* SIOCSIWRANGE */
+        ipw2100_wx_get_range,     /* SIOCGIWRANGE */
+        NULL,                     /* SIOCSIWPRIV */
+        NULL,                     /* SIOCGIWPRIV */
+        NULL,                     /* SIOCSIWSTATS */
+        NULL,                     /* SIOCGIWSTATS */
+        NULL,                     /* SIOCSIWSPY */
+        NULL,                     /* SIOCGIWSPY */
+        NULL,                     /* SIOCGIWTHRSPY */
+        NULL,                     /* SIOCWIWTHRSPY */
+        ipw2100_wx_set_wap,       /* SIOCSIWAP */
+        ipw2100_wx_get_wap,       /* SIOCGIWAP */
+        NULL,                     /* -- hole -- */
+        NULL,                     /* SIOCGIWAPLIST -- depricated */
+        ipw2100_wx_set_scan,      /* SIOCSIWSCAN */
+        ipw2100_wx_get_scan,      /* SIOCGIWSCAN */
+        ipw2100_wx_set_essid,     /* SIOCSIWESSID */
+        ipw2100_wx_get_essid,     /* SIOCGIWESSID */
+        ipw2100_wx_set_nick,      /* SIOCSIWNICKN */
+        ipw2100_wx_get_nick,      /* SIOCGIWNICKN */
+        NULL,                     /* -- hole -- */
+        NULL,                     /* -- hole -- */
+        ipw2100_wx_set_rate,      /* SIOCSIWRATE */
+        ipw2100_wx_get_rate,      /* SIOCGIWRATE */
+        ipw2100_wx_set_rts,       /* SIOCSIWRTS */
+        ipw2100_wx_get_rts,       /* SIOCGIWRTS */
+        ipw2100_wx_set_frag,      /* SIOCSIWFRAG */
+        ipw2100_wx_get_frag,      /* SIOCGIWFRAG */
+        ipw2100_wx_set_txpow,     /* SIOCSIWTXPOW */
+        ipw2100_wx_get_txpow,     /* SIOCGIWTXPOW */
+        ipw2100_wx_set_retry,     /* SIOCSIWRETRY */
+        ipw2100_wx_get_retry,     /* SIOCGIWRETRY */
+        ipw2100_wx_set_encode,    /* SIOCSIWENCODE */
+        ipw2100_wx_get_encode,    /* SIOCGIWENCODE */
+        ipw2100_wx_set_power,     /* SIOCSIWPOWER */
+        ipw2100_wx_get_power,     /* SIOCGIWPOWER */
+};
+
+#define IPW2100_PRIV_SET_MONITOR       SIOCIWFIRSTPRIV
+#define IPW2100_PRIV_RESET             SIOCIWFIRSTPRIV+1
+#define IPW2100_PRIV_SET_POWER         SIOCIWFIRSTPRIV+2
+#define IPW2100_PRIV_GET_POWER         SIOCIWFIRSTPRIV+3
+#define IPW2100_PRIV_SET_LONGPREAMBLE  SIOCIWFIRSTPRIV+4
+#define IPW2100_PRIV_GET_LONGPREAMBLE  SIOCIWFIRSTPRIV+5
+
+static const struct iw_priv_args ipw2100_private_args[] = {
+
+#ifdef CONFIG_IPW2100_MONITOR
+       {
+               IPW2100_PRIV_SET_MONITOR,
+               IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"
+       },
+       {
+               IPW2100_PRIV_RESET,
+               IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"
+       },
+#endif /* CONFIG_IPW2100_MONITOR */
+
+       {
+               IPW2100_PRIV_SET_POWER,
+               IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"
+       },
+       {
+               IPW2100_PRIV_GET_POWER,
+               0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, "get_power"
+       },
+       {
+               IPW2100_PRIV_SET_LONGPREAMBLE,
+               IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"
+       },
+       {
+               IPW2100_PRIV_GET_LONGPREAMBLE,
+               0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"
+       },
+};
+
+static iw_handler ipw2100_private_handler[] = {
+#ifdef CONFIG_IPW2100_MONITOR
+       ipw2100_wx_set_promisc,
+       ipw2100_wx_reset,
+#else /* CONFIG_IPW2100_MONITOR */
+       NULL,
+       NULL,
+#endif /* CONFIG_IPW2100_MONITOR */
+       ipw2100_wx_set_powermode,
+       ipw2100_wx_get_powermode,
+       ipw2100_wx_set_preamble,
+       ipw2100_wx_get_preamble,
+};
+
+struct iw_handler_def ipw2100_wx_handler_def =
+{
+       .standard = ipw2100_wx_handlers,
+       .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
+       .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
+       .num_private_args = sizeof(ipw2100_private_args) /
+       sizeof(struct iw_priv_args),
+       .private = (iw_handler *)ipw2100_private_handler,
+       .private_args = (struct iw_priv_args *)ipw2100_private_args,
+};
+
+/*
+ * Get wireless statistics.
+ * Called by /proc/net/wireless
+ * Also called by SIOCGIWSTATS
+ */
+struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev)
+{
+       enum {
+               POOR = 30,
+               FAIR = 60,
+               GOOD = 80,
+               VERY_GOOD = 90,
+               EXCELLENT = 95,
+               PERFECT = 100
+       };
+       int rssi_qual;
+       int tx_qual;
+       int beacon_qual;
+
+       struct ipw2100_priv *priv = ieee80211_priv(dev);
+       struct iw_statistics *wstats;
+       u32 rssi, quality, tx_retries, missed_beacons, tx_failures;
+       u32 ord_len = sizeof(u32);
+
+       if (!priv)
+               return (struct iw_statistics *) NULL;
+
+       wstats = &priv->wstats;
+
+       /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
+        * ipw2100_wx_wireless_stats seems to be called before fw is
+        * initialized.  STATUS_ASSOCIATED will only be set if the hw is up
+        * and associated; if not associcated, the values are all meaningless
+        * anyway, so set them all to NULL and INVALID */
+       if (!(priv->status & STATUS_ASSOCIATED)) {
+               wstats->miss.beacon = 0;
+               wstats->discard.retries = 0;
+               wstats->qual.qual = 0;
+               wstats->qual.level = 0;
+               wstats->qual.noise = 0;
+               wstats->qual.updated = 7;
+               wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
+                       IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
+               return wstats;
+       }
+
+       if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
+                               &missed_beacons, &ord_len))
+               goto fail_get_ordinal;
+
+        /* If we don't have a connection the quality and level is 0*/
+       if (!(priv->status & STATUS_ASSOCIATED)) {
+               wstats->qual.qual = 0;
+               wstats->qual.level = 0;
+       } else {
+               if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
+                                       &rssi, &ord_len))
+                       goto fail_get_ordinal;
+               wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
+               if (rssi < 10)
+                       rssi_qual = rssi * POOR / 10;
+               else if (rssi < 15)
+                       rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
+               else if (rssi < 20)
+                       rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
+               else if (rssi < 30)
+                       rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
+                               10 + GOOD;
+               else
+                       rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
+                               10 + VERY_GOOD;
+
+               if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
+                                       &tx_retries, &ord_len))
+                       goto fail_get_ordinal;
+
+               if (tx_retries > 75)
+                       tx_qual = (90 - tx_retries) * POOR / 15;
+               else if (tx_retries > 70)
+                       tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
+               else if (tx_retries > 65)
+                       tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
+               else if (tx_retries > 50)
+                       tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
+                               15 + GOOD;
+               else
+                       tx_qual = (50 - tx_retries) *
+                               (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
+
+               if (missed_beacons > 50)
+                       beacon_qual = (60 - missed_beacons) * POOR / 10;
+               else if (missed_beacons > 40)
+                       beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
+                               10 + POOR;
+               else if (missed_beacons > 32)
+                       beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
+                               18 + FAIR;
+               else if (missed_beacons > 20)
+                       beacon_qual = (32 - missed_beacons) *
+                               (VERY_GOOD - GOOD) / 20 + GOOD;
+               else
+                       beacon_qual = (20 - missed_beacons) *
+                               (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
+
+               quality = min(beacon_qual, min(tx_qual, rssi_qual));
+
+#ifdef CONFIG_IPW_DEBUG
+               if (beacon_qual == quality)
+                       IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
+               else if (tx_qual == quality)
+                       IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
+               else if (quality != 100)
+                       IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
+               else
+                       IPW_DEBUG_WX("Quality not clamped.\n");
+#endif
+
+               wstats->qual.qual = quality;
+               wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
+       }
+
+       wstats->qual.noise = 0;
+       wstats->qual.updated = 7;
+       wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
+
+        /* FIXME: this is percent and not a # */
+       wstats->miss.beacon = missed_beacons;
+
+       if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
+                               &tx_failures, &ord_len))
+               goto fail_get_ordinal;
+       wstats->discard.retries = tx_failures;
+
+       return wstats;
+
+ fail_get_ordinal:
+       IPW_DEBUG_WX("failed querying ordinals.\n");
+
+       return (struct iw_statistics *) NULL;
+}
+
+void ipw2100_wx_event_work(struct ipw2100_priv *priv)
+{
+       union iwreq_data wrqu;
+       int len = ETH_ALEN;
+
+       if (priv->status & STATUS_STOPPING)
+               return;
+
+       down(&priv->action_sem);
+
+       IPW_DEBUG_WX("enter\n");
+
+       up(&priv->action_sem);
+
+       wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+       /* Fetch BSSID from the hardware */
+       if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
+           priv->status & STATUS_RF_KILL_MASK ||
+           ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
+                               &priv->bssid,  &len)) {
+               memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
+       } else {
+               /* We now have the BSSID, so can finish setting to the full
+                * associated state */
+               memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
+               memcpy(&priv->ieee->bssid, priv->bssid, ETH_ALEN);
+               priv->status &= ~STATUS_ASSOCIATING;
+               priv->status |= STATUS_ASSOCIATED;
+               netif_carrier_on(priv->net_dev);
+               if (netif_queue_stopped(priv->net_dev)) {
+                       IPW_DEBUG_INFO("Waking net queue.\n");
+                       netif_wake_queue(priv->net_dev);
+               } else {
+                       IPW_DEBUG_INFO("Starting net queue.\n");
+                       netif_start_queue(priv->net_dev);
+               }
+       }
+
+       if (!(priv->status & STATUS_ASSOCIATED)) {
+               IPW_DEBUG_WX("Configuring ESSID\n");
+               down(&priv->action_sem);
+               /* This is a disassociation event, so kick the firmware to
+                * look for another AP */
+               if (priv->config & CFG_STATIC_ESSID)
+                       ipw2100_set_essid(priv, priv->essid, priv->essid_len, 0);
+               else
+                       ipw2100_set_essid(priv, NULL, 0, 0);
+               up(&priv->action_sem);
+       }
+
+       wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+#define IPW2100_FW_MAJOR_VERSION 1
+#define IPW2100_FW_MINOR_VERSION 3
+
+#define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
+#define IPW2100_FW_MAJOR(x) (x & 0xff)
+
+#define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
+                             IPW2100_FW_MAJOR_VERSION)
+
+#define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
+"." __stringify(IPW2100_FW_MINOR_VERSION)
+
+#define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
+
+
+/*
+
+BINARY FIRMWARE HEADER FORMAT
+
+offset      length   desc
+0           2        version
+2           2        mode == 0:BSS,1:IBSS,2:MONITOR
+4           4        fw_len
+8           4        uc_len
+C           fw_len   firmware data
+12 + fw_len uc_len   microcode data
+
+*/
+
+struct ipw2100_fw_header {
+       short version;
+       short mode;
+       unsigned int fw_size;
+       unsigned int uc_size;
+} __attribute__ ((packed));
+
+
+
+static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
+{
+       struct ipw2100_fw_header *h =
+               (struct ipw2100_fw_header *)fw->fw_entry->data;
+
+       if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
+               IPW_DEBUG_WARNING("Firmware image not compatible "
+                      "(detected version id of %u). "
+                      "See Documentation/networking/README.ipw2100\n",
+                      h->version);
+               return 1;
+       }
+
+       fw->version = h->version;
+       fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
+       fw->fw.size = h->fw_size;
+       fw->uc.data = fw->fw.data + h->fw_size;
+       fw->uc.size = h->uc_size;
+
+       return 0;
+}
+
+
+int ipw2100_get_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+       char *fw_name;
+       int rc;
+
+       IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
+              priv->net_dev->name);
+
+       switch (priv->ieee->iw_mode) {
+       case IW_MODE_ADHOC:
+               fw_name = IPW2100_FW_NAME("-i");
+               break;
+#ifdef CONFIG_IPW2100_MONITOR
+       case IW_MODE_MONITOR:
+               fw_name = IPW2100_FW_NAME("-p");
+               break;
+#endif
+       case IW_MODE_INFRA:
+       default:
+               fw_name = IPW2100_FW_NAME("");
+               break;
+       }
+
+       rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
+
+       if (rc < 0) {
+               IPW_DEBUG_ERROR(
+                      "%s: Firmware '%s' not available or load failed.\n",
+                      priv->net_dev->name, fw_name);
+               return rc;
+       }
+       IPW_DEBUG_INFO("firmware data %p size %d\n", fw->fw_entry->data,
+                          fw->fw_entry->size);
+
+       ipw2100_mod_firmware_load(fw);
+
+       return 0;
+}
+
+void ipw2100_release_firmware(struct ipw2100_priv *priv,
+                             struct ipw2100_fw *fw)
+{
+       fw->version = 0;
+       if (fw->fw_entry)
+               release_firmware(fw->fw_entry);
+       fw->fw_entry = NULL;
+}
+
+
+int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, size_t max)
+{
+       char ver[MAX_FW_VERSION_LEN];
+       u32 len = MAX_FW_VERSION_LEN;
+       u32 tmp;
+       int i;
+       /* firmware version is an ascii string (max len of 14) */
+       if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM,
+                               ver, &len))
+               return -EIO;
+       tmp = max;
+       if (len >= max)
+               len = max - 1;
+       for (i = 0; i < len; i++)
+               buf[i] = ver[i];
+       buf[i] = '\0';
+       return tmp;
+}
+
+int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, size_t max)
+{
+       u32 ver;
+       u32 len = sizeof(ver);
+       /* microcode version is a 32 bit integer */
+       if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION,
+                               &ver, &len))
+               return -EIO;
+       return snprintf(buf, max, "%08X", ver);
+}
+
+/*
+ * On exit, the firmware will have been freed from the fw list
+ */
+int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+       /* firmware is constructed of N contiguous entries, each entry is
+        * structured as:
+        *
+        * offset    sie         desc
+        * 0         4           address to write to
+        * 4         2           length of data run
+         * 6         length      data
+        */
+       unsigned int addr;
+       unsigned short len;
+
+       const unsigned char *firmware_data = fw->fw.data;
+       unsigned int firmware_data_left = fw->fw.size;
+
+       while (firmware_data_left > 0) {
+               addr = *(u32 *)(firmware_data);
+               firmware_data      += 4;
+               firmware_data_left -= 4;
+
+               len = *(u16 *)(firmware_data);
+               firmware_data      += 2;
+               firmware_data_left -= 2;
+
+               if (len > 32) {
+                       IPW_DEBUG_ERROR(
+                              "Invalid firmware run-length of %d bytes\n",
+                              len);
+                       return -EINVAL;
+               }
+
+               write_nic_memory(priv->net_dev, addr, len, firmware_data);
+               firmware_data      += len;
+               firmware_data_left -= len;
+       }
+
+       return 0;
+}
+
+struct symbol_alive_response {
+       u8 cmd_id;
+       u8 seq_num;
+       u8 ucode_rev;
+       u8 eeprom_valid;
+       u16 valid_flags;
+       u8 IEEE_addr[6];
+       u16 flags;
+       u16 pcb_rev;
+       u16 clock_settle_time;  // 1us LSB
+       u16 powerup_settle_time;        // 1us LSB
+       u16 hop_settle_time;    // 1us LSB
+       u8 date[3];             // month, day, year
+       u8 time[2];             // hours, minutes
+       u8 ucode_valid;
+};
+
+int ipw2100_ucode_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
+{
+       struct net_device *dev = priv->net_dev;
+       const unsigned char *microcode_data = fw->uc.data;
+       unsigned int microcode_data_left = fw->uc.size;
+
+       struct symbol_alive_response response;
+       int i, j;
+       u8 data;
+
+       /* Symbol control */
+       write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
+       readl((void *)(dev->base_addr));
+       write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
+       readl((void *)(dev->base_addr));
+
+       /* HW config */
+       write_nic_byte(dev, 0x210014, 0x72);    /* fifo width =16 */
+       readl((void *)(dev->base_addr));
+       write_nic_byte(dev, 0x210014, 0x72);    /* fifo width =16 */
+       readl((void *)(dev->base_addr));
+
+       /* EN_CS_ACCESS bit to reset control store pointer */
+       write_nic_byte(dev, 0x210000, 0x40);
+       readl((void *)(dev->base_addr));
+       write_nic_byte(dev, 0x210000, 0x0);
+       readl((void *)(dev->base_addr));
+       write_nic_byte(dev, 0x210000, 0x40);
+       readl((void *)(dev->base_addr));
+
+       /* copy microcode from buffer into Symbol */
+
+       while (microcode_data_left > 0) {
+               write_nic_byte(dev, 0x210010, *microcode_data++);
+               write_nic_byte(dev, 0x210010, *microcode_data++);
+               microcode_data_left -= 2;
+       }
+
+       /* EN_CS_ACCESS bit to reset the control store pointer */
+       write_nic_byte(dev, 0x210000, 0x0);
+       readl((void *)(dev->base_addr));
+
+       /* Enable System (Reg 0)
+        * first enable causes garbage in RX FIFO */
+       write_nic_byte(dev, 0x210000, 0x0);
+       readl((void *)(dev->base_addr));
+       write_nic_byte(dev, 0x210000, 0x80);
+       readl((void *)(dev->base_addr));
+
+       /* Reset External Baseband Reg */
+       write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
+       readl((void *)(dev->base_addr));
+       write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
+       readl((void *)(dev->base_addr));
+
+       /* HW Config (Reg 5) */
+       write_nic_byte(dev, 0x210014, 0x72);    // fifo width =16
+       readl((void *)(dev->base_addr));
+       write_nic_byte(dev, 0x210014, 0x72);    // fifo width =16
+       readl((void *)(dev->base_addr));
+
+       /* Enable System (Reg 0)
+        * second enable should be OK */
+       write_nic_byte(dev, 0x210000, 0x00);    // clear enable system
+       readl((void *)(dev->base_addr));
+       write_nic_byte(dev, 0x210000, 0x80);    // set enable system
+
+       /* check Symbol is enabled - upped this from 5 as it wasn't always
+        * catching the update */
+       for (i = 0; i < 10; i++) {
+               udelay(10);
+
+               /* check Dino is enabled bit */
+               read_nic_byte(dev, 0x210000, &data);
+               if (data & 0x1)
+                       break;
+       }
+
+       if (i == 10) {
+               IPW_DEBUG_ERROR("%s: Error initializing Symbol\n",
+                      dev->name);
+               return -EIO;
+       }
+
+       /* Get Symbol alive response */
+       for (i = 0; i < 30; i++) {
+               /* Read alive response structure */
+               for (j = 0;
+                    j < (sizeof(struct symbol_alive_response) >> 1);
+                    j++)
+                       read_nic_word(dev, 0x210004,
+                                     ((u16 *)&response) + j);
+
+               if ((response.cmd_id == 1) &&
+                   (response.ucode_valid == 0x1))
+                       break;
+               udelay(10);
+       }
+
+       if (i == 30) {
+               IPW_DEBUG_ERROR("%s: No response from Symbol - hw not alive\n",
+                      dev->name);
+               printk_buf(IPW_DL_ERROR, (u8*)&response, sizeof(response));
+               return -EIO;
+       }
+
+       return 0;
+}
diff --git a/drivers/net/wireless/ipw2100.h b/drivers/net/wireless/ipw2100.h
new file mode 100644 (file)
index 0000000..0cc5746
--- /dev/null
@@ -0,0 +1,1278 @@
+/******************************************************************************
+
+  Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
+
+  This program is free software; you can redistribute it and/or modify it
+  under the terms of version 2 of the GNU General Public License as
+  published by the Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but WITHOUT
+  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+  more details.
+
+  You should have received a copy of the GNU General Public License along with
+  this program; if not, write to the Free Software Foundation, Inc., 59
+  Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+
+  The full GNU General Public License is included in this distribution in the
+  file called LICENSE.
+
+  Contact Information:
+  James P. Ketrenos <ipw2100-admin@linux.intel.com>
+  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+******************************************************************************/
+#ifndef _IPW2100_H
+#define _IPW2100_H
+
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <asm/io.h>
+#include <linux/socket.h>
+#include <linux/if_arp.h>
+#include <linux/wireless.h>
+#include <linux/version.h>
+#include <net/iw_handler.h>    // new driver API
+
+#include <net/ieee80211.h>
+
+#include <linux/workqueue.h>
+
+#ifndef IRQ_NONE
+typedef void irqreturn_t;
+#define IRQ_NONE
+#define IRQ_HANDLED
+#define IRQ_RETVAL(x)
+#endif
+
+#if WIRELESS_EXT < 17
+#define IW_QUAL_QUAL_INVALID  0x10
+#define IW_QUAL_LEVEL_INVALID 0x20
+#define IW_QUAL_NOISE_INVALID 0x40
+#endif
+
+#if ( LINUX_VERSION_CODE < KERNEL_VERSION(2,6,5) )
+#define pci_dma_sync_single_for_cpu    pci_dma_sync_single
+#define pci_dma_sync_single_for_device pci_dma_sync_single
+#endif
+
+#ifndef HAVE_FREE_NETDEV
+#define free_netdev(x) kfree(x)
+#endif
+
+
+
+struct ipw2100_priv;
+struct ipw2100_tx_packet;
+struct ipw2100_rx_packet;
+
+#ifdef CONFIG_IPW_DEBUG
+enum { IPW_DEBUG_ENABLED = 1 };
+extern u32 ipw2100_debug_level;
+#define IPW_DEBUG(level, message...) \
+do { \
+       if (ipw2100_debug_level & (level)) { \
+               printk(KERN_DEBUG "ipw2100: %c %s ", \
+                       in_interrupt() ? 'I' : 'U',  __FUNCTION__); \
+               printk(message); \
+       } \
+} while (0)
+#else
+enum { IPW_DEBUG_ENABLED = 0 };
+#define IPW_DEBUG(level, message...) do {} while (0)
+#endif /* CONFIG_IPW_DEBUG */
+
+#define IPW_DL_UNINIT    0x80000000
+#define IPW_DL_NONE      0x00000000
+#define IPW_DL_ALL       0x7FFFFFFF
+
+/*
+ * To use the debug system;
+ *
+ * If you are defining a new debug classification, simply add it to the #define
+ * list here in the form of:
+ *
+ * #define IPW_DL_xxxx VALUE
+ *
+ * shifting value to the left one bit from the previous entry.  xxxx should be
+ * the name of the classification (for example, WEP)
+ *
+ * You then need to either add a IPW2100_xxxx_DEBUG() macro definition for your
+ * classification, or use IPW_DEBUG(IPW_DL_xxxx, ...) whenever you want
+ * to send output to that classification.
+ *
+ * To add your debug level to the list of levels seen when you perform
+ *
+ * % cat /proc/net/ipw2100/debug_level
+ *
+ * you simply need to add your entry to the ipw2100_debug_levels array.
+ *
+ * If you do not see debug_level in /proc/net/ipw2100 then you do not have
+ * CONFIG_IPW_DEBUG defined in your kernel configuration
+ *
+ */
+
+#define IPW_DL_ERROR         (1<<0)
+#define IPW_DL_WARNING       (1<<1)
+#define IPW_DL_INFO          (1<<2)
+#define IPW_DL_WX            (1<<3)
+#define IPW_DL_HC            (1<<5)
+#define IPW_DL_STATE         (1<<6)
+
+#define IPW_DL_NOTIF         (1<<10)
+#define IPW_DL_SCAN          (1<<11)
+#define IPW_DL_ASSOC         (1<<12)
+#define IPW_DL_DROP          (1<<13)
+
+#define IPW_DL_IOCTL         (1<<14)
+#define IPW_DL_RF_KILL       (1<<17)
+
+
+#define IPW_DL_MANAGE        (1<<15)
+#define IPW_DL_FW            (1<<16)
+
+#define IPW_DL_FRAG          (1<<21)
+#define IPW_DL_WEP           (1<<22)
+#define IPW_DL_TX            (1<<23)
+#define IPW_DL_RX            (1<<24)
+#define IPW_DL_ISR           (1<<25)
+#define IPW_DL_IO            (1<<26)
+#define IPW_DL_TRACE         (1<<28)
+
+#define IPW_DEBUG_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a)
+#define IPW_DEBUG_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a)
+#define IPW_DEBUG_INFO(f...)    IPW_DEBUG(IPW_DL_INFO, ## f)
+#define IPW_DEBUG_WX(f...)     IPW_DEBUG(IPW_DL_WX, ## f)
+#define IPW_DEBUG_SCAN(f...)   IPW_DEBUG(IPW_DL_SCAN, ## f)
+#define IPW_DEBUG_NOTIF(f...) IPW_DEBUG(IPW_DL_NOTIF, ## f)
+#define IPW_DEBUG_TRACE(f...)  IPW_DEBUG(IPW_DL_TRACE, ## f)
+#define IPW_DEBUG_RX(f...)     IPW_DEBUG(IPW_DL_RX, ## f)
+#define IPW_DEBUG_TX(f...)     IPW_DEBUG(IPW_DL_TX, ## f)
+#define IPW_DEBUG_ISR(f...)    IPW_DEBUG(IPW_DL_ISR, ## f)
+#define IPW_DEBUG_MANAGEMENT(f...) IPW_DEBUG(IPW_DL_MANAGE, ## f)
+#define IPW_DEBUG_WEP(f...)    IPW_DEBUG(IPW_DL_WEP, ## f)
+#define IPW_DEBUG_HC(f...) IPW_DEBUG(IPW_DL_HC, ## f)
+#define IPW_DEBUG_FRAG(f...) IPW_DEBUG(IPW_DL_FRAG, ## f)
+#define IPW_DEBUG_FW(f...) IPW_DEBUG(IPW_DL_FW, ## f)
+#define IPW_DEBUG_RF_KILL(f...) IPW_DEBUG(IPW_DL_RF_KILL, ## f)
+#define IPW_DEBUG_DROP(f...) IPW_DEBUG(IPW_DL_DROP, ## f)
+#define IPW_DEBUG_IO(f...) IPW_DEBUG(IPW_DL_IO, ## f)
+#define IPW_DEBUG_IOCTL(f...) IPW_DEBUG(IPW_DL_IOCTL, ## f)
+#define IPW_DEBUG_STATE(f, a...) IPW_DEBUG(IPW_DL_STATE | IPW_DL_ASSOC | IPW_DL_INFO, f, ## a)
+#define IPW_DEBUG_ASSOC(f, a...) IPW_DEBUG(IPW_DL_ASSOC | IPW_DL_INFO, f, ## a)
+
+
+#define VERIFY(f) \
+{ \
+  int status = 0; \
+  status = f; \
+  if(status) \
+     return status; \
+}
+
+enum {
+       IPW_HW_STATE_DISABLED = 1,
+       IPW_HW_STATE_ENABLED = 0
+};
+
+struct ssid_context {
+       char ssid[IW_ESSID_MAX_SIZE + 1];
+       int ssid_len;
+       unsigned char bssid[ETH_ALEN];
+       int port_type;
+       int channel;
+
+};
+
+extern const char *port_type_str[];
+extern const char *band_str[];
+
+#define NUMBER_OF_BD_PER_COMMAND_PACKET                1
+#define NUMBER_OF_BD_PER_DATA_PACKET           2
+
+#define IPW_MAX_BDS 6
+#define NUMBER_OF_OVERHEAD_BDS_PER_PACKETR     2
+#define NUMBER_OF_BDS_TO_LEAVE_FOR_COMMANDS    1
+
+#define REQUIRED_SPACE_IN_RING_FOR_COMMAND_PACKET \
+    (IPW_BD_QUEUE_W_R_MIN_SPARE + NUMBER_OF_BD_PER_COMMAND_PACKET)
+
+struct bd_status {
+       union {
+               struct { u8 nlf:1, txType:2, intEnabled:1, reserved:4;} fields;
+               u8 field;
+       } info;
+} __attribute__ ((packed));
+
+#define        IPW_BUFDESC_LAST_FRAG 0
+
+struct ipw2100_bd {
+       u32 host_addr;
+       u32 buf_length;
+       struct bd_status status;
+        /* number of fragments for frame (should be set only for
+        * 1st TBD) */
+       u8 num_fragments;
+       u8 reserved[6];
+} __attribute__ ((packed));
+
+#define IPW_BD_QUEUE_LENGTH(n) (1<<n)
+#define IPW_BD_ALIGNMENT(L)    (L*sizeof(struct ipw2100_bd))
+
+#define IPW_BD_STATUS_TX_FRAME_802_3             0x00
+#define IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT 0x01
+#define IPW_BD_STATUS_TX_FRAME_COMMAND          0x02
+#define IPW_BD_STATUS_TX_FRAME_802_11           0x04
+#define IPW_BD_STATUS_TX_INTERRUPT_ENABLE       0x08
+
+struct ipw2100_bd_queue {
+       /* driver (virtual) pointer to queue */
+       struct ipw2100_bd *drv;
+
+       /* firmware (physical) pointer to queue */
+       dma_addr_t nic;
+
+       /* Length of phy memory allocated for BDs */
+       u32 size;
+
+       /* Number of BDs in queue (and in array) */
+       u32 entries;
+
+       /* Number of available BDs (invalid for NIC BDs) */
+       u32 available;
+
+       /* Offset of oldest used BD in array (next one to
+        * check for completion) */
+       u32 oldest;
+
+       /* Offset of next available (unused) BD */
+       u32 next;
+};
+
+#define RX_QUEUE_LENGTH 256
+#define TX_QUEUE_LENGTH 256
+#define HW_QUEUE_LENGTH 256
+
+#define TX_PENDED_QUEUE_LENGTH (TX_QUEUE_LENGTH / NUMBER_OF_BD_PER_DATA_PACKET)
+
+#define STATUS_TYPE_MASK       0x0000000f
+#define COMMAND_STATUS_VAL     0
+#define STATUS_CHANGE_VAL      1
+#define P80211_DATA_VAL        2
+#define P8023_DATA_VAL         3
+#define HOST_NOTIFICATION_VAL  4
+
+#define IPW2100_RSSI_TO_DBM (-98)
+
+struct ipw2100_status {
+       u32 frame_size;
+       u16 status_fields;
+       u8 flags;
+#define IPW_STATUS_FLAG_DECRYPTED      (1<<0)
+#define IPW_STATUS_FLAG_WEP_ENCRYPTED  (1<<1)
+#define IPW_STATUS_FLAG_CRC_ERROR       (1<<2)
+       u8 rssi;
+} __attribute__ ((packed));
+
+struct ipw2100_status_queue {
+       /* driver (virtual) pointer to queue */
+       struct ipw2100_status *drv;
+
+       /* firmware (physical) pointer to queue */
+       dma_addr_t nic;
+
+       /* Length of phy memory allocated for BDs */
+       u32 size;
+};
+
+#define HOST_COMMAND_PARAMS_REG_LEN    100
+#define CMD_STATUS_PARAMS_REG_LEN      3
+
+#define IPW_WPA_CAPABILITIES   0x1
+#define IPW_WPA_LISTENINTERVAL 0x2
+#define IPW_WPA_AP_ADDRESS     0x4
+
+#define IPW_MAX_VAR_IE_LEN ((HOST_COMMAND_PARAMS_REG_LEN - 4) * sizeof(u32))
+
+struct ipw2100_wpa_assoc_frame {
+       u16 fixed_ie_mask;
+       struct {
+               u16 capab_info;
+               u16 listen_interval;
+               u8 current_ap[ETH_ALEN];
+       } fixed_ies;
+       u32 var_ie_len;
+       u8 var_ie[IPW_MAX_VAR_IE_LEN];
+};
+
+#define IPW_BSS     1
+#define IPW_MONITOR 2
+#define IPW_IBSS    3
+
+/**
+ * @struct _tx_cmd - HWCommand
+ * @brief H/W command structure.
+ */
+struct ipw2100_cmd_header {
+       u32 host_command_reg;
+       u32 host_command_reg1;
+       u32 sequence;
+       u32 host_command_len_reg;
+       u32 host_command_params_reg[HOST_COMMAND_PARAMS_REG_LEN];
+       u32 cmd_status_reg;
+       u32 cmd_status_params_reg[CMD_STATUS_PARAMS_REG_LEN];
+       u32 rxq_base_ptr;
+       u32 rxq_next_ptr;
+       u32 rxq_host_ptr;
+       u32 txq_base_ptr;
+       u32 txq_next_ptr;
+       u32 txq_host_ptr;
+       u32 tx_status_reg;
+       u32 reserved;
+       u32 status_change_reg;
+       u32 reserved1[3];
+       u32 *ordinal1_ptr;
+       u32 *ordinal2_ptr;
+} __attribute__ ((packed));
+
+struct ipw2100_data_header {
+       u32 host_command_reg;
+       u32 host_command_reg1;
+       u8 encrypted;   // BOOLEAN in win! TRUE if frame is enc by driver
+       u8 needs_encryption;    // BOOLEAN in win! TRUE if frma need to be enc in NIC
+       u8 wep_index;           // 0 no key, 1-4 key index, 0xff immediate key
+       u8 key_size;    // 0 no imm key, 0x5 64bit encr, 0xd 128bit encr, 0x10 128bit encr and 128bit IV
+       u8 key[16];
+       u8 reserved[10];        // f/w reserved
+       u8 src_addr[ETH_ALEN];
+       u8 dst_addr[ETH_ALEN];
+       u16 fragment_size;
+} __attribute__ ((packed));
+
+// Host command data structure
+struct host_command {
+       u32 host_command;               // COMMAND ID
+       u32 host_command1;              // COMMAND ID
+       u32 host_command_sequence;      // UNIQUE COMMAND NUMBER (ID)
+       u32 host_command_length;        // LENGTH
+       u32 host_command_parameters[HOST_COMMAND_PARAMS_REG_LEN];       // COMMAND PARAMETERS
+} __attribute__ ((packed));
+
+
+typedef enum {
+       POWER_ON_RESET,
+       EXIT_POWER_DOWN_RESET,
+       SW_RESET,
+       EEPROM_RW,
+       SW_RE_INIT
+} ipw2100_reset_event;
+
+enum {
+       COMMAND = 0xCAFE,
+       DATA,
+       RX
+};
+
+
+struct ipw2100_tx_packet {
+       int type;
+       int index;
+       union {
+               struct { /* COMMAND */
+                       struct ipw2100_cmd_header* cmd;
+                       dma_addr_t cmd_phys;
+               } c_struct;
+               struct { /* DATA */
+                       struct ipw2100_data_header* data;
+                       dma_addr_t data_phys;
+                       struct ieee80211_txb *txb;
+               } d_struct;
+       } info;
+       int jiffy_start;
+
+       struct list_head list;
+};
+
+
+struct ipw2100_rx_packet {
+       struct ipw2100_rx *rxp;
+       dma_addr_t dma_addr;
+       int jiffy_start;
+       struct sk_buff *skb;
+       struct list_head list;
+};
+
+#define FRAG_DISABLED             (1<<31)
+#define RTS_DISABLED              (1<<31)
+#define MAX_RTS_THRESHOLD         2304U
+#define MIN_RTS_THRESHOLD         1U
+#define DEFAULT_RTS_THRESHOLD     1000U
+
+#define DEFAULT_BEACON_INTERVAL   100U
+#define        DEFAULT_SHORT_RETRY_LIMIT 7U
+#define        DEFAULT_LONG_RETRY_LIMIT  4U
+
+struct ipw2100_ordinals {
+       u32 table1_addr;
+       u32 table2_addr;
+       u32 table1_size;
+       u32 table2_size;
+};
+
+/* Host Notification header */
+struct ipw2100_notification {
+       u32 hnhdr_subtype;      /* type of host notification */
+       u32 hnhdr_size;         /* size in bytes of data
+                                  or number of entries, if table.
+                                  Does NOT include header */
+} __attribute__ ((packed));
+
+#define MAX_KEY_SIZE   16
+#define        MAX_KEYS        8
+
+#define IPW2100_WEP_ENABLE     (1<<1)
+#define IPW2100_WEP_DROP_CLEAR (1<<2)
+
+#define IPW_NONE_CIPHER   (1<<0)
+#define IPW_WEP40_CIPHER  (1<<1)
+#define IPW_TKIP_CIPHER   (1<<2)
+#define IPW_CCMP_CIPHER   (1<<4)
+#define IPW_WEP104_CIPHER (1<<5)
+#define IPW_CKIP_CIPHER   (1<<6)
+
+#define        IPW_AUTH_OPEN     0
+#define        IPW_AUTH_SHARED   1
+
+struct statistic {
+       int value;
+       int hi;
+       int lo;
+};
+
+#define INIT_STAT(x) do {  \
+  (x)->value = (x)->hi = 0; \
+  (x)->lo = 0x7fffffff; \
+} while (0)
+#define SET_STAT(x,y) do { \
+  (x)->value = y; \
+  if ((x)->value > (x)->hi) (x)->hi = (x)->value; \
+  if ((x)->value < (x)->lo) (x)->lo = (x)->value; \
+} while (0)
+#define INC_STAT(x) do { if (++(x)->value > (x)->hi) (x)->hi = (x)->value; } \
+while (0)
+#define DEC_STAT(x) do { if (--(x)->value < (x)->lo) (x)->lo = (x)->value; } \
+while (0)
+
+#define IPW2100_ERROR_QUEUE 5
+
+/* Power management code: enable or disable? */
+enum {
+#ifdef CONFIG_PM
+       IPW2100_PM_DISABLED = 0,
+       PM_STATE_SIZE = 16,
+#else
+       IPW2100_PM_DISABLED = 1,
+       PM_STATE_SIZE = 0,
+#endif
+};
+
+#define STATUS_POWERED          (1<<0)
+#define STATUS_CMD_ACTIVE       (1<<1)  /**< host command in progress */
+#define STATUS_RUNNING          (1<<2)  /* Card initialized, but not enabled */
+#define STATUS_ENABLED          (1<<3)  /* Card enabled -- can scan,Tx,Rx */
+#define STATUS_STOPPING         (1<<4)  /* Card is in shutdown phase */
+#define STATUS_INITIALIZED      (1<<5)  /* Card is ready for external calls */
+#define STATUS_ASSOCIATING      (1<<9)  /* Associated, but no BSSID yet */
+#define STATUS_ASSOCIATED       (1<<10) /* Associated and BSSID valid */
+#define STATUS_INT_ENABLED      (1<<11)
+#define STATUS_RF_KILL_HW       (1<<12)
+#define STATUS_RF_KILL_SW       (1<<13)
+#define STATUS_RF_KILL_MASK     (STATUS_RF_KILL_HW | STATUS_RF_KILL_SW)
+#define STATUS_EXIT_PENDING     (1<<14)
+
+#define STATUS_SCAN_PENDING     (1<<23)
+#define STATUS_SCANNING         (1<<24)
+#define STATUS_SCAN_ABORTING    (1<<25)
+#define STATUS_SCAN_COMPLETE    (1<<26)
+#define STATUS_WX_EVENT_PENDING (1<<27)
+#define STATUS_RESET_PENDING    (1<<29)
+#define STATUS_SECURITY_UPDATED (1<<30) /* Security sync needed */
+
+
+
+/* Internal NIC states */
+#define IPW_STATE_INITIALIZED  (1<<0)
+#define IPW_STATE_COUNTRY_FOUND        (1<<1)
+#define IPW_STATE_ASSOCIATED    (1<<2)
+#define IPW_STATE_ASSN_LOST    (1<<3)
+#define IPW_STATE_ASSN_CHANGED         (1<<4)
+#define IPW_STATE_SCAN_COMPLETE        (1<<5)
+#define IPW_STATE_ENTERED_PSP  (1<<6)
+#define IPW_STATE_LEFT_PSP     (1<<7)
+#define IPW_STATE_RF_KILL       (1<<8)
+#define IPW_STATE_DISABLED     (1<<9)
+#define IPW_STATE_POWER_DOWN   (1<<10)
+#define IPW_STATE_SCANNING      (1<<11)
+
+
+
+#define CFG_STATIC_CHANNEL      (1<<0) /* Restrict assoc. to single channel */
+#define CFG_STATIC_ESSID        (1<<1) /* Restrict assoc. to single SSID */
+#define CFG_STATIC_BSSID        (1<<2) /* Restrict assoc. to single BSSID */
+#define CFG_CUSTOM_MAC          (1<<3)
+#define CFG_LONG_PREAMBLE       (1<<4)
+#define CFG_ASSOCIATE           (1<<6)
+#define CFG_FIXED_RATE          (1<<7)
+#define CFG_ADHOC_CREATE        (1<<8)
+#define CFG_C3_DISABLED         (1<<9)
+#define CFG_PASSIVE_SCAN        (1<<10)
+
+#define CAP_SHARED_KEY          (1<<0) /* Off = OPEN */
+#define CAP_PRIVACY_ON          (1<<1) /* Off = No privacy */
+
+struct ipw2100_priv {
+
+       int stop_hang_check; /* Set 1 when shutting down to kill hang_check */
+       int stop_rf_kill; /* Set 1 when shutting down to kill rf_kill */
+
+       struct ieee80211_device *ieee;
+       unsigned long status;
+       unsigned long config;
+       unsigned long capability;
+
+       /* Statistics */
+       int resets;
+       int reset_backoff;
+
+       /* Context */
+       u8 essid[IW_ESSID_MAX_SIZE];
+       u8 essid_len;
+       u8 bssid[ETH_ALEN];
+       u8 channel;
+       int last_mode;
+       int cstate_limit;
+
+       unsigned long connect_start;
+       unsigned long last_reset;
+
+       u32 channel_mask;
+       u32 fatal_error;
+       u32 fatal_errors[IPW2100_ERROR_QUEUE];
+       u32 fatal_index;
+       int eeprom_version;
+       int firmware_version;
+       unsigned long hw_features;
+       int hangs;
+       u32 last_rtc;
+       int dump_raw; /* 1 to dump raw bytes in /sys/.../memory */
+       u8* snapshot[0x30];
+
+       u8 mandatory_bssid_mac[ETH_ALEN];
+       u8 mac_addr[ETH_ALEN];
+
+       int power_mode;
+
+       /* WEP data */
+       struct ieee80211_security sec;
+       int messages_sent;
+
+
+       int short_retry_limit;
+       int long_retry_limit;
+
+       u32 rts_threshold;
+       u32 frag_threshold;
+
+       int in_isr;
+
+       u32 tx_rates;
+       int tx_power;
+       u32 beacon_interval;
+
+       char nick[IW_ESSID_MAX_SIZE + 1];
+
+       struct ipw2100_status_queue status_queue;
+
+       struct statistic txq_stat;
+       struct statistic rxq_stat;
+       struct ipw2100_bd_queue rx_queue;
+       struct ipw2100_bd_queue tx_queue;
+       struct ipw2100_rx_packet *rx_buffers;
+
+       struct statistic fw_pend_stat;
+       struct list_head fw_pend_list;
+
+       struct statistic msg_free_stat;
+       struct statistic msg_pend_stat;
+       struct list_head msg_free_list;
+       struct list_head msg_pend_list;
+       struct ipw2100_tx_packet *msg_buffers;
+
+       struct statistic tx_free_stat;
+       struct statistic tx_pend_stat;
+       struct list_head tx_free_list;
+       struct list_head tx_pend_list;
+       struct ipw2100_tx_packet *tx_buffers;
+
+       struct ipw2100_ordinals ordinals;
+
+       struct pci_dev *pci_dev;
+
+       struct proc_dir_entry *dir_dev;
+
+       struct net_device *net_dev;
+       struct iw_statistics wstats;
+
+       struct tasklet_struct irq_tasklet;
+
+       struct workqueue_struct *workqueue;
+       struct work_struct reset_work;
+       struct work_struct security_work;
+       struct work_struct wx_event_work;
+       struct work_struct hang_check;
+       struct work_struct rf_kill;
+
+       u32 interrupts;
+       int tx_interrupts;
+       int rx_interrupts;
+       int inta_other;
+
+       spinlock_t low_lock;
+       struct semaphore action_sem;
+       struct semaphore adapter_sem;
+
+       wait_queue_head_t wait_command_queue;
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+       u32 pm_state[PM_STATE_SIZE];
+#endif
+};
+
+
+/*********************************************************
+ * Host Command -> From Driver to FW
+ *********************************************************/
+
+/**
+ * Host command identifiers
+ */
+#define HOST_COMPLETE           2
+#define SYSTEM_CONFIG           6
+#define SSID                    8
+#define MANDATORY_BSSID         9
+#define AUTHENTICATION_TYPE    10
+#define ADAPTER_ADDRESS        11
+#define PORT_TYPE              12
+#define INTERNATIONAL_MODE     13
+#define CHANNEL                14
+#define RTS_THRESHOLD          15
+#define FRAG_THRESHOLD         16
+#define POWER_MODE             17
+#define TX_RATES               18
+#define BASIC_TX_RATES         19
+#define WEP_KEY_INFO           20
+#define WEP_KEY_INDEX          25
+#define WEP_FLAGS              26
+#define ADD_MULTICAST          27
+#define CLEAR_ALL_MULTICAST    28
+#define BEACON_INTERVAL        29
+#define ATIM_WINDOW            30
+#define CLEAR_STATISTICS       31
+#define SEND                  33
+#define TX_POWER_INDEX         36
+#define BROADCAST_SCAN         43
+#define CARD_DISABLE           44
+#define PREFERRED_BSSID        45
+#define SET_SCAN_OPTIONS       46
+#define SCAN_DWELL_TIME        47
+#define SWEEP_TABLE            48
+#define AP_OR_STATION_TABLE    49
+#define GROUP_ORDINALS         50
+#define SHORT_RETRY_LIMIT      51
+#define LONG_RETRY_LIMIT       52
+
+#define HOST_PRE_POWER_DOWN    58
+#define CARD_DISABLE_PHY_OFF   61
+#define MSDU_TX_RATES          62
+
+
+// Rogue AP Detection
+#define SET_STATION_STAT_BITS      64
+#define CLEAR_STATIONS_STAT_BITS   65
+#define LEAP_ROGUE_MODE            66  //TODO tbw replaced by CFG_LEAP_ROGUE_AP
+#define SET_SECURITY_INFORMATION   67
+#define DISASSOCIATION_BSSID      68
+#define SET_WPA_IE                 69
+
+
+
+// system configuration bit mask:
+//#define IPW_CFG_ANTENNA_SETTING           0x03
+//#define IPW_CFG_ANTENNA_A                 0x01
+//#define IPW_CFG_ANTENNA_B                 0x02
+#define IPW_CFG_MONITOR               0x00004
+//#define IPW_CFG_TX_STATUS_ENABLE    0x00008
+#define IPW_CFG_PREAMBLE_AUTO        0x00010
+#define IPW_CFG_IBSS_AUTO_START     0x00020
+//#define IPW_CFG_KERBEROS_ENABLE     0x00040
+#define IPW_CFG_LOOPBACK            0x00100
+//#define IPW_CFG_WNMP_PING_PASS      0x00200
+//#define IPW_CFG_DEBUG_ENABLE        0x00400
+#define IPW_CFG_ANSWER_BCSSID_PROBE 0x00800
+//#define IPW_CFG_BT_PRIORITY         0x01000
+#define IPW_CFG_BT_SIDEBAND_SIGNAL     0x02000
+#define IPW_CFG_802_1x_ENABLE       0x04000
+#define IPW_CFG_BSS_MASK               0x08000
+#define IPW_CFG_IBSS_MASK              0x10000
+//#define IPW_CFG_DYNAMIC_CW          0x10000
+
+#define IPW_SCAN_NOASSOCIATE (1<<0)
+#define IPW_SCAN_MIXED_CELL (1<<1)
+/* RESERVED (1<<2) */
+#define IPW_SCAN_PASSIVE (1<<3)
+
+#define IPW_NIC_FATAL_ERROR 0x2A7F0
+#define IPW_ERROR_ADDR(x) (x & 0x3FFFF)
+#define IPW_ERROR_CODE(x) ((x & 0xFF000000) >> 24)
+#define IPW2100_ERR_C3_CORRUPTION (0x10 << 24)
+#define IPW2100_ERR_MSG_TIMEOUT   (0x11 << 24)
+#define IPW2100_ERR_FW_LOAD       (0x12 << 24)
+
+#define IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND                   0x200
+#define IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND   IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0D80
+
+#define IPW_MEM_HOST_SHARED_RX_BD_BASE                  (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x40)
+#define IPW_MEM_HOST_SHARED_RX_STATUS_BASE              (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x44)
+#define IPW_MEM_HOST_SHARED_RX_BD_SIZE                  (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x48)
+#define IPW_MEM_HOST_SHARED_RX_READ_INDEX               (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0xa0)
+
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x00)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x04)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX       (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x80)
+
+#define IPW_MEM_HOST_SHARED_RX_WRITE_INDEX \
+    (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x20)
+
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX \
+    (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND)
+
+
+#if 0
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_0_BD_BASE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x00)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_0_BD_SIZE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x04)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_1_BD_BASE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x08)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_1_BD_SIZE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0c)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_2_BD_BASE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x10)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_2_BD_SIZE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x14)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_3_BD_BASE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x18)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_3_BD_SIZE          (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x1c)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_0_READ_INDEX       (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x80)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_1_READ_INDEX       (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x84)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_2_READ_INDEX       (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x88)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_3_READ_INDEX       (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x8c)
+
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE(QueueNum) \
+    (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + (QueueNum<<3))
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE(QueueNum) \
+    (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0004+(QueueNum<<3))
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX(QueueNum) \
+    (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x0080+(QueueNum<<2))
+
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_0_WRITE_INDEX \
+    (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x00)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_1_WRITE_INDEX \
+    (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x04)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_2_WRITE_INDEX \
+    (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x08)
+#define IPW_MEM_HOST_SHARED_TX_QUEUE_3_WRITE_INDEX \
+    (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x0c)
+#define IPW_MEM_HOST_SHARED_SLAVE_MODE_INT_REGISTER \
+    (IPW_MEM_SRAM_HOST_INTERRUPT_AREA_LOWER_BOUND + 0x78)
+
+#endif
+
+#define IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1   (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x180)
+#define IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2   (IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND + 0x184)
+
+#define IPW2100_INTA_TX_TRANSFER               (0x00000001)    // Bit 0 (LSB)
+#define IPW2100_INTA_RX_TRANSFER               (0x00000002)    // Bit 1
+#define IPW2100_INTA_TX_COMPLETE              (0x00000004)     // Bit 2
+#define IPW2100_INTA_EVENT_INTERRUPT           (0x00000008)     // Bit 3
+#define IPW2100_INTA_STATUS_CHANGE             (0x00000010)    // Bit 4
+#define IPW2100_INTA_BEACON_PERIOD_EXPIRED     (0x00000020)    // Bit 5
+#define IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE  (0x00010000)        // Bit 16
+#define IPW2100_INTA_FW_INIT_DONE              (0x01000000)    // Bit 24
+#define IPW2100_INTA_FW_CALIBRATION_CALC       (0x02000000)    // Bit 25
+#define IPW2100_INTA_FATAL_ERROR               (0x40000000)    // Bit 30
+#define IPW2100_INTA_PARITY_ERROR              (0x80000000)    // Bit 31 (MSB)
+
+#define IPW_AUX_HOST_RESET_REG_PRINCETON_RESET              (0x00000001)
+#define IPW_AUX_HOST_RESET_REG_FORCE_NMI                    (0x00000002)
+#define IPW_AUX_HOST_RESET_REG_PCI_HOST_CLUSTER_FATAL_NMI   (0x00000004)
+#define IPW_AUX_HOST_RESET_REG_CORE_FATAL_NMI               (0x00000008)
+#define IPW_AUX_HOST_RESET_REG_SW_RESET                     (0x00000080)
+#define IPW_AUX_HOST_RESET_REG_MASTER_DISABLED              (0x00000100)
+#define IPW_AUX_HOST_RESET_REG_STOP_MASTER                  (0x00000200)
+
+#define IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY           (0x00000001)   // Bit 0 (LSB)
+#define IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY   (0x00000002)   // Bit 1
+#define IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE             (0x00000004)   // Bit 2
+#define IPW_AUX_HOST_GP_CNTRL_BITS_SYS_CONFIG           (0x000007c0)   // Bits 6-10
+#define IPW_AUX_HOST_GP_CNTRL_BIT_BUS_TYPE              (0x00000200)   // Bit 9
+#define IPW_AUX_HOST_GP_CNTRL_BIT_BAR0_BLOCK_SIZE       (0x00000400)   // Bit 10
+#define IPW_AUX_HOST_GP_CNTRL_BIT_USB_MODE              (0x20000000)   // Bit 29
+#define IPW_AUX_HOST_GP_CNTRL_BIT_HOST_FORCES_SYS_CLK   (0x40000000)   // Bit 30
+#define IPW_AUX_HOST_GP_CNTRL_BIT_FW_FORCES_SYS_CLK     (0x80000000)   // Bit 31 (MSB)
+
+#define IPW_BIT_GPIO_GPIO1_MASK         0x0000000C
+#define IPW_BIT_GPIO_GPIO3_MASK         0x000000C0
+#define IPW_BIT_GPIO_GPIO1_ENABLE       0x00000008
+#define IPW_BIT_GPIO_RF_KILL            0x00010000
+
+#define IPW_BIT_GPIO_LED_OFF            0x00002000     // Bit 13 = 1
+
+#define IPW_REG_DOMAIN_0_OFFSET        0x0000
+#define IPW_REG_DOMAIN_1_OFFSET        IPW_MEM_SRAM_HOST_SHARED_LOWER_BOUND
+
+#define IPW_REG_INTA                   IPW_REG_DOMAIN_0_OFFSET + 0x0008
+#define IPW_REG_INTA_MASK              IPW_REG_DOMAIN_0_OFFSET + 0x000C
+#define IPW_REG_INDIRECT_ACCESS_ADDRESS        IPW_REG_DOMAIN_0_OFFSET + 0x0010
+#define IPW_REG_INDIRECT_ACCESS_DATA   IPW_REG_DOMAIN_0_OFFSET + 0x0014
+#define IPW_REG_AUTOINCREMENT_ADDRESS  IPW_REG_DOMAIN_0_OFFSET + 0x0018
+#define IPW_REG_AUTOINCREMENT_DATA     IPW_REG_DOMAIN_0_OFFSET + 0x001C
+#define IPW_REG_RESET_REG              IPW_REG_DOMAIN_0_OFFSET + 0x0020
+#define IPW_REG_GP_CNTRL               IPW_REG_DOMAIN_0_OFFSET + 0x0024
+#define IPW_REG_GPIO                   IPW_REG_DOMAIN_0_OFFSET + 0x0030
+#define IPW_REG_FW_TYPE                 IPW_REG_DOMAIN_1_OFFSET + 0x0188
+#define IPW_REG_FW_VERSION             IPW_REG_DOMAIN_1_OFFSET + 0x018C
+#define IPW_REG_FW_COMPATABILITY_VERSION IPW_REG_DOMAIN_1_OFFSET + 0x0190
+
+#define IPW_REG_INDIRECT_ADDR_MASK     0x00FFFFFC
+
+#define IPW_INTERRUPT_MASK             0xC1010013
+
+#define IPW2100_CONTROL_REG             0x220000
+#define IPW2100_CONTROL_PHY_OFF         0x8
+
+#define IPW2100_COMMAND                        0x00300004
+#define IPW2100_COMMAND_PHY_ON         0x0
+#define IPW2100_COMMAND_PHY_OFF                0x1
+
+/* in DEBUG_AREA, values of memory always 0xd55555d5 */
+#define IPW_REG_DOA_DEBUG_AREA_START    IPW_REG_DOMAIN_0_OFFSET + 0x0090
+#define IPW_REG_DOA_DEBUG_AREA_END      IPW_REG_DOMAIN_0_OFFSET + 0x00FF
+#define IPW_DATA_DOA_DEBUG_VALUE        0xd55555d5
+
+#define IPW_INTERNAL_REGISTER_HALT_AND_RESET   0x003000e0
+
+#define IPW_WAIT_CLOCK_STABILIZATION_DELAY         50  // micro seconds
+#define IPW_WAIT_RESET_ARC_COMPLETE_DELAY          10  // micro seconds
+#define IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY 10 // micro seconds
+
+// BD ring queue read/write difference
+#define IPW_BD_QUEUE_W_R_MIN_SPARE 2
+
+#define IPW_CACHE_LINE_LENGTH_DEFAULT              0x80
+
+#define IPW_CARD_DISABLE_PHY_OFF_COMPLETE_WAIT     100 // 100 milli
+#define IPW_PREPARE_POWER_DOWN_COMPLETE_WAIT       100 // 100 milli
+
+
+
+
+#define IPW_HEADER_802_11_SIZE          sizeof(struct ieee80211_header_data)
+#define IPW_MAX_80211_PAYLOAD_SIZE              2304U
+#define IPW_MAX_802_11_PAYLOAD_LENGTH          2312
+#define IPW_MAX_ACCEPTABLE_TX_FRAME_LENGTH     1536
+#define IPW_MIN_ACCEPTABLE_RX_FRAME_LENGTH     60
+#define IPW_MAX_ACCEPTABLE_RX_FRAME_LENGTH \
+       (IPW_MAX_ACCEPTABLE_TX_FRAME_LENGTH + IPW_HEADER_802_11_SIZE - \
+        sizeof(struct ethhdr))
+
+#define IPW_802_11_FCS_LENGTH 4
+#define IPW_RX_NIC_BUFFER_LENGTH \
+        (IPW_MAX_802_11_PAYLOAD_LENGTH + IPW_HEADER_802_11_SIZE + \
+               IPW_802_11_FCS_LENGTH)
+
+#define IPW_802_11_PAYLOAD_OFFSET \
+        (sizeof(struct ieee80211_header_data) + \
+         sizeof(struct ieee80211_snap_hdr))
+
+struct ipw2100_rx {
+       union {
+               unsigned char payload[IPW_RX_NIC_BUFFER_LENGTH];
+               struct ieee80211_hdr header;
+               u32 status;
+               struct ipw2100_notification notification;
+               struct ipw2100_cmd_header command;
+       } rx_data;
+} __attribute__ ((packed));
+
+// Bit 0-7 are for 802.11b tx rates - .  Bit 5-7 are reserved
+#define TX_RATE_1_MBIT              0x0001
+#define TX_RATE_2_MBIT              0x0002
+#define TX_RATE_5_5_MBIT            0x0004
+#define TX_RATE_11_MBIT             0x0008
+#define TX_RATE_MASK                0x000F
+#define DEFAULT_TX_RATES            0x000F
+
+#define IPW_POWER_MODE_CAM           0x00      //(always on)
+#define IPW_POWER_INDEX_1            0x01
+#define IPW_POWER_INDEX_2            0x02
+#define IPW_POWER_INDEX_3            0x03
+#define IPW_POWER_INDEX_4            0x04
+#define IPW_POWER_INDEX_5            0x05
+#define IPW_POWER_AUTO               0x06
+#define IPW_POWER_MASK               0x0F
+#define IPW_POWER_ENABLED            0x10
+#define IPW_POWER_LEVEL(x)           ((x) & IPW_POWER_MASK)
+
+#define IPW_TX_POWER_AUTO            0
+#define IPW_TX_POWER_ENHANCED        1
+
+#define IPW_TX_POWER_DEFAULT         32
+#define IPW_TX_POWER_MIN             0
+#define IPW_TX_POWER_MAX             16
+#define IPW_TX_POWER_MIN_DBM         (-12)
+#define IPW_TX_POWER_MAX_DBM         16
+
+#define FW_SCAN_DONOT_ASSOCIATE     0x0001 // Dont Attempt to Associate after Scan
+#define FW_SCAN_PASSIVE             0x0008 // Force PASSSIVE Scan
+
+#define REG_MIN_CHANNEL             0
+#define REG_MAX_CHANNEL             14
+
+#define REG_CHANNEL_MASK            0x00003FFF
+#define IPW_IBSS_11B_DEFAULT_MASK   0x87ff
+
+#define DIVERSITY_EITHER            0  // Use both antennas
+#define DIVERSITY_ANTENNA_A         1  // Use antenna A
+#define DIVERSITY_ANTENNA_B         2  // Use antenna B
+
+
+#define HOST_COMMAND_WAIT 0
+#define HOST_COMMAND_NO_WAIT 1
+
+#define LOCK_NONE 0
+#define LOCK_DRIVER 1
+#define LOCK_FW 2
+
+#define TYPE_SWEEP_ORD                  0x000D
+#define TYPE_IBSS_STTN_ORD              0x000E
+#define TYPE_BSS_AP_ORD                 0x000F
+#define TYPE_RAW_BEACON_ENTRY           0x0010
+#define TYPE_CALIBRATION_DATA           0x0011
+#define TYPE_ROGUE_AP_DATA              0x0012
+#define TYPE_ASSOCIATION_REQUEST       0x0013
+#define TYPE_REASSOCIATION_REQUEST     0x0014
+
+
+#define HW_FEATURE_RFKILL (0x0001)
+#define RF_KILLSWITCH_OFF (1)
+#define RF_KILLSWITCH_ON  (0)
+
+#define IPW_COMMAND_POOL_SIZE        40
+
+#define IPW_START_ORD_TAB_1                    1
+#define IPW_START_ORD_TAB_2                    1000
+
+#define IPW_ORD_TAB_1_ENTRY_SIZE               sizeof(u32)
+
+#define IS_ORDINAL_TABLE_ONE(mgr,id) \
+    ((id >= IPW_START_ORD_TAB_1) && (id < mgr->table1_size))
+#define IS_ORDINAL_TABLE_TWO(mgr,id) \
+    ((id >= IPW_START_ORD_TAB_2) && (id < (mgr->table2_size + IPW_START_ORD_TAB_2)))
+
+#define BSS_ID_LENGTH               6
+
+// Fixed size data: Ordinal Table 1
+typedef enum _ORDINAL_TABLE_1 {        // NS - means Not Supported by FW
+// Transmit statistics
+       IPW_ORD_STAT_TX_HOST_REQUESTS = 1,// # of requested Host Tx's (MSDU)
+       IPW_ORD_STAT_TX_HOST_COMPLETE,  // # of successful Host Tx's (MSDU)
+       IPW_ORD_STAT_TX_DIR_DATA,       // # of successful Directed Tx's (MSDU)
+
+       IPW_ORD_STAT_TX_DIR_DATA1 = 4,  // # of successful Directed Tx's (MSDU) @ 1MB
+       IPW_ORD_STAT_TX_DIR_DATA2,      // # of successful Directed Tx's (MSDU) @ 2MB
+       IPW_ORD_STAT_TX_DIR_DATA5_5,    // # of successful Directed Tx's (MSDU) @ 5_5MB
+       IPW_ORD_STAT_TX_DIR_DATA11,     // # of successful Directed Tx's (MSDU) @ 11MB
+       IPW_ORD_STAT_TX_DIR_DATA22,     // # of successful Directed Tx's (MSDU) @ 22MB
+
+       IPW_ORD_STAT_TX_NODIR_DATA1 = 13,// # of successful Non_Directed Tx's (MSDU) @ 1MB
+       IPW_ORD_STAT_TX_NODIR_DATA2,    // # of successful Non_Directed Tx's (MSDU) @ 2MB
+       IPW_ORD_STAT_TX_NODIR_DATA5_5,  // # of successful Non_Directed Tx's (MSDU) @ 5.5MB
+       IPW_ORD_STAT_TX_NODIR_DATA11,   // # of successful Non_Directed Tx's (MSDU) @ 11MB
+
+       IPW_ORD_STAT_NULL_DATA = 21,    // # of successful NULL data Tx's
+       IPW_ORD_STAT_TX_RTS,            // # of successful Tx RTS
+       IPW_ORD_STAT_TX_CTS,            // # of successful Tx CTS
+       IPW_ORD_STAT_TX_ACK,            // # of successful Tx ACK
+       IPW_ORD_STAT_TX_ASSN,           // # of successful Association Tx's
+       IPW_ORD_STAT_TX_ASSN_RESP,      // # of successful Association response Tx's
+       IPW_ORD_STAT_TX_REASSN,         // # of successful Reassociation Tx's
+       IPW_ORD_STAT_TX_REASSN_RESP,    // # of successful Reassociation response Tx's
+       IPW_ORD_STAT_TX_PROBE,          // # of probes successfully transmitted
+       IPW_ORD_STAT_TX_PROBE_RESP,     // # of probe responses successfully transmitted
+       IPW_ORD_STAT_TX_BEACON,         // # of tx beacon
+       IPW_ORD_STAT_TX_ATIM,           // # of Tx ATIM
+       IPW_ORD_STAT_TX_DISASSN,        // # of successful Disassociation TX
+       IPW_ORD_STAT_TX_AUTH,           // # of successful Authentication Tx
+       IPW_ORD_STAT_TX_DEAUTH,         // # of successful Deauthentication TX
+
+       IPW_ORD_STAT_TX_TOTAL_BYTES = 41,// Total successful Tx data bytes
+       IPW_ORD_STAT_TX_RETRIES,         // # of Tx retries
+       IPW_ORD_STAT_TX_RETRY1,          // # of Tx retries at 1MBPS
+       IPW_ORD_STAT_TX_RETRY2,          // # of Tx retries at 2MBPS
+       IPW_ORD_STAT_TX_RETRY5_5,        // # of Tx retries at 5.5MBPS
+       IPW_ORD_STAT_TX_RETRY11,         // # of Tx retries at 11MBPS
+
+       IPW_ORD_STAT_TX_FAILURES = 51,  // # of Tx Failures
+       IPW_ORD_STAT_TX_ABORT_AT_HOP,   //NS // # of Tx's aborted at hop time
+       IPW_ORD_STAT_TX_MAX_TRIES_IN_HOP,// # of times max tries in a hop failed
+       IPW_ORD_STAT_TX_ABORT_LATE_DMA, //NS // # of times tx aborted due to late dma setup
+       IPW_ORD_STAT_TX_ABORT_STX,      //NS // # of times backoff aborted
+       IPW_ORD_STAT_TX_DISASSN_FAIL,   // # of times disassociation failed
+       IPW_ORD_STAT_TX_ERR_CTS,         // # of missed/bad CTS frames
+       IPW_ORD_STAT_TX_BPDU,           //NS // # of spanning tree BPDUs sent
+       IPW_ORD_STAT_TX_ERR_ACK,        // # of tx err due to acks
+
+       // Receive statistics
+       IPW_ORD_STAT_RX_HOST = 61,      // # of packets passed to host
+       IPW_ORD_STAT_RX_DIR_DATA,       // # of directed packets
+       IPW_ORD_STAT_RX_DIR_DATA1,      // # of directed packets at 1MB
+       IPW_ORD_STAT_RX_DIR_DATA2,      // # of directed packets at 2MB
+       IPW_ORD_STAT_RX_DIR_DATA5_5,    // # of directed packets at 5.5MB
+       IPW_ORD_STAT_RX_DIR_DATA11,     // # of directed packets at 11MB
+       IPW_ORD_STAT_RX_DIR_DATA22,     // # of directed packets at 22MB
+
+       IPW_ORD_STAT_RX_NODIR_DATA = 71,// # of nondirected packets
+       IPW_ORD_STAT_RX_NODIR_DATA1,    // # of nondirected packets at 1MB
+       IPW_ORD_STAT_RX_NODIR_DATA2,    // # of nondirected packets at 2MB
+       IPW_ORD_STAT_RX_NODIR_DATA5_5,  // # of nondirected packets at 5.5MB
+       IPW_ORD_STAT_RX_NODIR_DATA11,   // # of nondirected packets at 11MB
+
+       IPW_ORD_STAT_RX_NULL_DATA = 80, // # of null data rx's
+       IPW_ORD_STAT_RX_POLL,   //NS // # of poll rx
+       IPW_ORD_STAT_RX_RTS,    // # of Rx RTS
+       IPW_ORD_STAT_RX_CTS,    // # of Rx CTS
+       IPW_ORD_STAT_RX_ACK,    // # of Rx ACK
+       IPW_ORD_STAT_RX_CFEND,  // # of Rx CF End
+       IPW_ORD_STAT_RX_CFEND_ACK,      // # of Rx CF End + CF Ack
+       IPW_ORD_STAT_RX_ASSN,   // # of Association Rx's
+       IPW_ORD_STAT_RX_ASSN_RESP,      // # of Association response Rx's
+       IPW_ORD_STAT_RX_REASSN, // # of Reassociation Rx's
+       IPW_ORD_STAT_RX_REASSN_RESP,    // # of Reassociation response Rx's
+       IPW_ORD_STAT_RX_PROBE,  // # of probe Rx's
+       IPW_ORD_STAT_RX_PROBE_RESP,     // # of probe response Rx's
+       IPW_ORD_STAT_RX_BEACON, // # of Rx beacon
+       IPW_ORD_STAT_RX_ATIM,   // # of Rx ATIM
+       IPW_ORD_STAT_RX_DISASSN,        // # of disassociation Rx
+       IPW_ORD_STAT_RX_AUTH,   // # of authentication Rx
+       IPW_ORD_STAT_RX_DEAUTH, // # of deauthentication Rx
+
+       IPW_ORD_STAT_RX_TOTAL_BYTES = 101,// Total rx data bytes received
+       IPW_ORD_STAT_RX_ERR_CRC,         // # of packets with Rx CRC error
+       IPW_ORD_STAT_RX_ERR_CRC1,        // # of Rx CRC errors at 1MB
+       IPW_ORD_STAT_RX_ERR_CRC2,        // # of Rx CRC errors at 2MB
+       IPW_ORD_STAT_RX_ERR_CRC5_5,      // # of Rx CRC errors at 5.5MB
+       IPW_ORD_STAT_RX_ERR_CRC11,       // # of Rx CRC errors at 11MB
+
+       IPW_ORD_STAT_RX_DUPLICATE1 = 112, // # of duplicate rx packets at 1MB
+       IPW_ORD_STAT_RX_DUPLICATE2,      // # of duplicate rx packets at 2MB
+       IPW_ORD_STAT_RX_DUPLICATE5_5,    // # of duplicate rx packets at 5.5MB
+       IPW_ORD_STAT_RX_DUPLICATE11,     // # of duplicate rx packets at 11MB
+       IPW_ORD_STAT_RX_DUPLICATE = 119, // # of duplicate rx packets
+
+       IPW_ORD_PERS_DB_LOCK = 120,     // # locking fw permanent  db
+       IPW_ORD_PERS_DB_SIZE,   // # size of fw permanent  db
+       IPW_ORD_PERS_DB_ADDR,   // # address of fw permanent  db
+       IPW_ORD_STAT_RX_INVALID_PROTOCOL,       // # of rx frames with invalid protocol
+       IPW_ORD_SYS_BOOT_TIME,  // # Boot time
+       IPW_ORD_STAT_RX_NO_BUFFER,      // # of rx frames rejected due to no buffer
+       IPW_ORD_STAT_RX_ABORT_LATE_DMA, //NS // # of rx frames rejected due to dma setup too late
+       IPW_ORD_STAT_RX_ABORT_AT_HOP,   //NS // # of rx frames aborted due to hop
+       IPW_ORD_STAT_RX_MISSING_FRAG,   // # of rx frames dropped due to missing fragment
+       IPW_ORD_STAT_RX_ORPHAN_FRAG,    // # of rx frames dropped due to non-sequential fragment
+       IPW_ORD_STAT_RX_ORPHAN_FRAME,   // # of rx frames dropped due to unmatched 1st frame
+       IPW_ORD_STAT_RX_FRAG_AGEOUT,    // # of rx frames dropped due to uncompleted frame
+       IPW_ORD_STAT_RX_BAD_SSID,       //NS // Bad SSID (unused)
+       IPW_ORD_STAT_RX_ICV_ERRORS,     // # of ICV errors during decryption
+
+// PSP Statistics
+       IPW_ORD_STAT_PSP_SUSPENSION = 137,// # of times adapter suspended
+       IPW_ORD_STAT_PSP_BCN_TIMEOUT,   // # of beacon timeout
+       IPW_ORD_STAT_PSP_POLL_TIMEOUT,  // # of poll response timeouts
+       IPW_ORD_STAT_PSP_NONDIR_TIMEOUT,// # of timeouts waiting for last broadcast/muticast pkt
+       IPW_ORD_STAT_PSP_RX_DTIMS,      // # of PSP DTIMs received
+       IPW_ORD_STAT_PSP_RX_TIMS,       // # of PSP TIMs received
+       IPW_ORD_STAT_PSP_STATION_ID,    // PSP Station ID
+
+// Association and roaming
+       IPW_ORD_LAST_ASSN_TIME = 147,   // RTC time of last association
+       IPW_ORD_STAT_PERCENT_MISSED_BCNS,// current calculation of % missed beacons
+       IPW_ORD_STAT_PERCENT_RETRIES,   // current calculation of % missed tx retries
+       IPW_ORD_ASSOCIATED_AP_PTR,      // If associated, this is ptr to the associated
+       // AP table entry. set to 0 if not associated
+       IPW_ORD_AVAILABLE_AP_CNT,       // # of AP's decsribed in the AP table
+       IPW_ORD_AP_LIST_PTR,    // Ptr to list of available APs
+       IPW_ORD_STAT_AP_ASSNS,  // # of associations
+       IPW_ORD_STAT_ASSN_FAIL, // # of association failures
+       IPW_ORD_STAT_ASSN_RESP_FAIL,    // # of failuresdue to response fail
+       IPW_ORD_STAT_FULL_SCANS,        // # of full scans
+
+       IPW_ORD_CARD_DISABLED,  // # Card Disabled
+       IPW_ORD_STAT_ROAM_INHIBIT,      // # of times roaming was inhibited due to ongoing activity
+       IPW_FILLER_40,
+       IPW_ORD_RSSI_AT_ASSN = 160,     // RSSI of associated AP at time of association
+       IPW_ORD_STAT_ASSN_CAUSE1,       // # of reassociations due to no tx from AP in last N
+       // hops or no prob_ responses in last 3 minutes
+       IPW_ORD_STAT_ASSN_CAUSE2,       // # of reassociations due to poor tx/rx quality
+       IPW_ORD_STAT_ASSN_CAUSE3,       // # of reassociations due to tx/rx quality with excessive
+       // load at the AP
+       IPW_ORD_STAT_ASSN_CAUSE4,       // # of reassociations due to AP RSSI level fell below
+       // eligible group
+       IPW_ORD_STAT_ASSN_CAUSE5,       // # of reassociations due to load leveling
+       IPW_ORD_STAT_ASSN_CAUSE6,       //NS // # of reassociations due to dropped by Ap
+       IPW_FILLER_41,
+       IPW_FILLER_42,
+       IPW_FILLER_43,
+       IPW_ORD_STAT_AUTH_FAIL, // # of times authentication failed
+       IPW_ORD_STAT_AUTH_RESP_FAIL,    // # of times authentication response failed
+       IPW_ORD_STATION_TABLE_CNT,      // # of entries in association table
+
+// Other statistics
+       IPW_ORD_RSSI_AVG_CURR = 173,    // Current avg RSSI
+       IPW_ORD_STEST_RESULTS_CURR,     //NS // Current self test results word
+       IPW_ORD_STEST_RESULTS_CUM,      //NS // Cummulative self test results word
+       IPW_ORD_SELF_TEST_STATUS,       //NS //
+       IPW_ORD_POWER_MGMT_MODE,        // Power mode - 0=CAM, 1=PSP
+       IPW_ORD_POWER_MGMT_INDEX,       //NS //
+       IPW_ORD_COUNTRY_CODE,   // IEEE country code as recv'd from beacon
+       IPW_ORD_COUNTRY_CHANNELS,       // channels suported by country
+// IPW_ORD_COUNTRY_CHANNELS:
+// For 11b the lower 2-byte are used for channels from 1-14
+//   and the higher 2-byte are not used.
+       IPW_ORD_RESET_CNT,      // # of adapter resets (warm)
+       IPW_ORD_BEACON_INTERVAL,        // Beacon interval
+
+       IPW_ORD_PRINCETON_VERSION = 184,        //NS // Princeton Version
+       IPW_ORD_ANTENNA_DIVERSITY,      // TRUE if antenna diversity is disabled
+       IPW_ORD_CCA_RSSI,       //NS // CCA RSSI value (factory programmed)
+       IPW_ORD_STAT_EEPROM_UPDATE,     //NS // # of times config EEPROM updated
+       IPW_ORD_DTIM_PERIOD,    // # of beacon intervals between DTIMs
+       IPW_ORD_OUR_FREQ,       // current radio freq lower digits - channel ID
+
+       IPW_ORD_RTC_TIME = 190, // current RTC time
+       IPW_ORD_PORT_TYPE,      // operating mode
+       IPW_ORD_CURRENT_TX_RATE,        // current tx rate
+       IPW_ORD_SUPPORTED_RATES,        // Bitmap of supported tx rates
+       IPW_ORD_ATIM_WINDOW,    // current ATIM Window
+       IPW_ORD_BASIC_RATES,    // bitmap of basic tx rates
+       IPW_ORD_NIC_HIGHEST_RATE,       // bitmap of basic tx rates
+       IPW_ORD_AP_HIGHEST_RATE,        // bitmap of basic tx rates
+       IPW_ORD_CAPABILITIES,   // Management frame capability field
+       IPW_ORD_AUTH_TYPE,      // Type of authentication
+       IPW_ORD_RADIO_TYPE,     // Adapter card platform type
+       IPW_ORD_RTS_THRESHOLD = 201,    // Min length of packet after which RTS handshaking is used
+       IPW_ORD_INT_MODE,       // International mode
+       IPW_ORD_FRAGMENTATION_THRESHOLD,        // protocol frag threshold
+       IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS,     // EEPROM offset in SRAM
+       IPW_ORD_EEPROM_SRAM_DB_BLOCK_SIZE,      // EEPROM size in SRAM
+       IPW_ORD_EEPROM_SKU_CAPABILITY,  // EEPROM SKU Capability    206 =
+       IPW_ORD_EEPROM_IBSS_11B_CHANNELS,       // EEPROM IBSS 11b channel set
+
+       IPW_ORD_MAC_VERSION = 209,      // MAC Version
+       IPW_ORD_MAC_REVISION,   // MAC Revision
+       IPW_ORD_RADIO_VERSION,  // Radio Version
+       IPW_ORD_NIC_MANF_DATE_TIME,     // MANF Date/Time STAMP
+       IPW_ORD_UCODE_VERSION,  // Ucode Version
+       IPW_ORD_HW_RF_SWITCH_STATE = 214,       // HW RF Kill Switch State
+} ORDINALTABLE1;
+//ENDOF TABLE1
+
+// ordinal table 2
+// Variable length data:
+#define IPW_FIRST_VARIABLE_LENGTH_ORDINAL   1001
+
+typedef enum _ORDINAL_TABLE_2 {        // NS - means Not Supported by FW
+       IPW_ORD_STAT_BASE = 1000,       // contains number of variable ORDs
+       IPW_ORD_STAT_ADAPTER_MAC = 1001,        // 6 bytes: our adapter MAC address
+       IPW_ORD_STAT_PREFERRED_BSSID = 1002,    // 6 bytes: BSSID of the preferred AP
+       IPW_ORD_STAT_MANDATORY_BSSID = 1003,    // 6 bytes: BSSID of the mandatory AP
+       IPW_FILL_1,             //NS //
+       IPW_ORD_STAT_COUNTRY_TEXT = 1005,       // 36 bytes: Country name text, First two bytes are Country code
+       IPW_ORD_STAT_ASSN_SSID = 1006,  // 32 bytes: ESSID String
+       IPW_ORD_STATION_TABLE = 1007,   // ? bytes: Station/AP table (via Direct SSID Scans)
+       IPW_ORD_STAT_SWEEP_TABLE = 1008,        // ? bytes: Sweep/Host Table table (via Broadcast Scans)
+       IPW_ORD_STAT_ROAM_LOG = 1009,   // ? bytes: Roaming log
+       IPW_ORD_STAT_RATE_LOG = 1010,   //NS // 0 bytes: Rate log
+       IPW_ORD_STAT_FIFO = 1011,       //NS // 0 bytes: Fifo buffer data structures
+       IPW_ORD_STAT_FW_VER_NUM = 1012, // 14 bytes: fw version ID string as in (a.bb.ccc; "0.08.011")
+       IPW_ORD_STAT_FW_DATE = 1013,    // 14 bytes: fw date string (mmm dd yyyy; "Mar 13 2002")
+       IPW_ORD_STAT_ASSN_AP_BSSID = 1014,      // 6 bytes: MAC address of associated AP
+       IPW_ORD_STAT_DEBUG = 1015,      //NS // ? bytes:
+       IPW_ORD_STAT_NIC_BPA_NUM = 1016,        // 11 bytes: NIC BPA number in ASCII
+       IPW_ORD_STAT_UCODE_DATE = 1017, // 5 bytes: uCode date
+       IPW_ORD_SECURITY_NGOTIATION_RESULT = 1018,
+} ORDINALTABLE2;               // NS - means Not Supported by FW
+
+#define IPW_LAST_VARIABLE_LENGTH_ORDINAL   1018
+
+#ifndef WIRELESS_SPY
+#define WIRELESS_SPY           // enable iwspy support
+#endif
+
+extern struct iw_handler_def ipw2100_wx_handler_def;
+extern struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev);
+extern void ipw2100_wx_event_work(struct ipw2100_priv *priv);
+
+#define IPW_HOST_FW_SHARED_AREA0       0x0002f200
+#define IPW_HOST_FW_SHARED_AREA0_END   0x0002f510      // 0x310 bytes
+
+#define IPW_HOST_FW_SHARED_AREA1       0x0002f610
+#define IPW_HOST_FW_SHARED_AREA1_END   0x0002f630      // 0x20 bytes
+
+#define IPW_HOST_FW_SHARED_AREA2       0x0002fa00
+#define IPW_HOST_FW_SHARED_AREA2_END   0x0002fa20      // 0x20 bytes
+
+#define IPW_HOST_FW_SHARED_AREA3       0x0002fc00
+#define IPW_HOST_FW_SHARED_AREA3_END   0x0002fc10      // 0x10 bytes
+
+#define IPW_HOST_FW_INTERRUPT_AREA     0x0002ff80
+#define IPW_HOST_FW_INTERRUPT_AREA_END         0x00030000      // 0x80 bytes
+
+struct ipw2100_fw_chunk {
+       unsigned char *buf;
+       long len;
+       long pos;
+       struct list_head list;
+};
+
+struct ipw2100_fw_chunk_set {
+       const void *data;
+       unsigned long size;
+};
+
+struct ipw2100_fw {
+       int version;
+       struct ipw2100_fw_chunk_set fw;
+       struct ipw2100_fw_chunk_set uc;
+       const struct firmware *fw_entry;
+};
+
+int ipw2100_get_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw);
+void ipw2100_release_firmware(struct ipw2100_priv *priv, struct ipw2100_fw *fw);
+int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw);
+int ipw2100_ucode_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw);
+
+#define MAX_FW_VERSION_LEN 14
+
+int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf, size_t max);
+int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf, size_t max);
+
+#endif /* _IPW2100_H */