core-$(CONFIG_M68EZ328) += arch/m68k/platform/68EZ328/
core-$(CONFIG_M68VZ328) += arch/m68k/platform/68VZ328/
core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/
-core-$(CONFIG_M5249) += arch/m68k/platform/5249/
core-$(CONFIG_M527x) += arch/m68k/platform/527x/
core-$(CONFIG_M5272) += arch/m68k/platform/5272/
core-$(CONFIG_M528x) += arch/m68k/platform/528x/
+++ /dev/null
-#
-# Makefile for the m68knommu linux kernel.
-#
-
-#
-# If you want to play with the HW breakpoints then you will
-# need to add define this, which will give you a stack backtrace
-# on the console port whenever a DBG interrupt occurs. You have to
-# set up you HW breakpoints to trigger a DBG interrupt:
-#
-# ccflags-y := -DTRAP_DBG_INTERRUPT
-# asflags-y := -DTRAP_DBG_INTERRUPT
-#
-
-asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
-
-obj-y := config.o intc2.o
-
+++ /dev/null
-/***************************************************************************/
-
-/*
- * linux/arch/m68knommu/platform/5249/config.c
- *
- * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
- */
-
-/***************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <asm/machdep.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#include <asm/mcfgpio.h>
-
-/***************************************************************************/
-
-struct mcf_gpio_chip mcf_gpio_chips[] = {
- MCFGPS(GPIO0, 0, 32, MCFSIM2_GPIOENABLE, MCFSIM2_GPIOWRITE, MCFSIM2_GPIOREAD),
- MCFGPS(GPIO1, 32, 32, MCFSIM2_GPIO1ENABLE, MCFSIM2_GPIO1WRITE, MCFSIM2_GPIO1READ),
-};
-
-unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
-
-/***************************************************************************/
-
-#ifdef CONFIG_M5249C3
-
-static struct resource m5249_smc91x_resources[] = {
- {
- .start = 0xe0000300,
- .end = 0xe0000300 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = MCFINTC2_GPIOIRQ6,
- .end = MCFINTC2_GPIOIRQ6,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device m5249_smc91x = {
- .name = "smc91x",
- .id = 0,
- .num_resources = ARRAY_SIZE(m5249_smc91x_resources),
- .resource = m5249_smc91x_resources,
-};
-
-#endif /* CONFIG_M5249C3 */
-
-static struct platform_device *m5249_devices[] __initdata = {
-#ifdef CONFIG_M5249C3
- &m5249_smc91x,
-#endif
-};
-
-/***************************************************************************/
-
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
-
-static void __init m5249_qspi_init(void)
-{
- /* QSPI irq setup */
- writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
- MCF_MBAR + MCFSIM_QSPIICR);
- mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
-}
-
-#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
-
-/***************************************************************************/
-
-#ifdef CONFIG_M5249C3
-
-static void __init m5249_smc91x_init(void)
-{
- u32 gpio;
-
- /* Set the GPIO line as interrupt source for smc91x device */
- gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
- writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-
- gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
- writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
-}
-
-#endif /* CONFIG_M5249C3 */
-
-/***************************************************************************/
-
-void __init config_BSP(char *commandp, int size)
-{
- mach_sched_init = hw_timer_init;
-
-#ifdef CONFIG_M5249C3
- m5249_smc91x_init();
-#endif
-#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
- m5249_qspi_init();
-#endif
-}
-
-/***************************************************************************/
-
-static int __init init_BSP(void)
-{
- platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
- return 0;
-}
-
-arch_initcall(init_BSP);
-
-/***************************************************************************/
+++ /dev/null
-/*
- * intc2.c -- support for the 2nd INTC controller of the 5249
- *
- * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-
-static void intc2_irq_gpio_mask(struct irq_data *d)
-{
- u32 imr;
- imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
- imr &= ~(0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
- writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-}
-
-static void intc2_irq_gpio_unmask(struct irq_data *d)
-{
- u32 imr;
- imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
- imr |= (0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
- writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
-}
-
-static void intc2_irq_gpio_ack(struct irq_data *d)
-{
- writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR);
-}
-
-static struct irq_chip intc2_irq_gpio_chip = {
- .name = "CF-INTC2",
- .irq_mask = intc2_irq_gpio_mask,
- .irq_unmask = intc2_irq_gpio_unmask,
- .irq_ack = intc2_irq_gpio_ack,
-};
-
-static int __init mcf_intc2_init(void)
-{
- int irq;
-
- /* GPIO interrupt sources */
- for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) {
- irq_set_chip(irq, &intc2_irq_gpio_chip);
- irq_set_handler(irq, handle_edge_irq);
- }
-
- return 0;
-}
-
-arch_initcall(mcf_intc2_init);
obj-$(CONFIG_M5206e) += m5206.o timers.o intc.o reset.o
obj-$(CONFIG_M520x) += m520x.o pit.o intc-simr.o reset.o
obj-$(CONFIG_M523x) += m523x.o pit.o dma_timer.o intc-2.o reset.o
-obj-$(CONFIG_M5249) += timers.o intc.o reset.o
+obj-$(CONFIG_M5249) += m5249.o timers.o intc.o intc-5249.o reset.o
obj-$(CONFIG_M527x) += pit.o intc-2.o reset.o
obj-$(CONFIG_M5272) += timers.o
obj-$(CONFIG_M528x) += pit.o intc-2.o reset.o
--- /dev/null
+/*
+ * intc2.c -- support for the 2nd INTC controller of the 5249
+ *
+ * (C) Copyright 2009, Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+
+static void intc2_irq_gpio_mask(struct irq_data *d)
+{
+ u32 imr;
+ imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ imr &= ~(0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
+ writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_unmask(struct irq_data *d)
+{
+ u32 imr;
+ imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ imr |= (0x1 << (d->irq - MCFINTC2_GPIOIRQ0));
+ writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+}
+
+static void intc2_irq_gpio_ack(struct irq_data *d)
+{
+ writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR);
+}
+
+static struct irq_chip intc2_irq_gpio_chip = {
+ .name = "CF-INTC2",
+ .irq_mask = intc2_irq_gpio_mask,
+ .irq_unmask = intc2_irq_gpio_unmask,
+ .irq_ack = intc2_irq_gpio_ack,
+};
+
+static int __init mcf_intc2_init(void)
+{
+ int irq;
+
+ /* GPIO interrupt sources */
+ for (irq = MCFINTC2_GPIOIRQ0; (irq <= MCFINTC2_GPIOIRQ7); irq++) {
+ irq_set_chip(irq, &intc2_irq_gpio_chip);
+ irq_set_handler(irq, handle_edge_irq);
+ }
+
+ return 0;
+}
+
+arch_initcall(mcf_intc2_init);
--- /dev/null
+/***************************************************************************/
+
+/*
+ * linux/arch/m68knommu/platform/5249/config.c
+ *
+ * Copyright (C) 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+ MCFGPS(GPIO0, 0, 32, MCFSIM2_GPIOENABLE, MCFSIM2_GPIOWRITE, MCFSIM2_GPIOREAD),
+ MCFGPS(GPIO1, 32, 32, MCFSIM2_GPIO1ENABLE, MCFSIM2_GPIO1WRITE, MCFSIM2_GPIO1READ),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#ifdef CONFIG_M5249C3
+
+static struct resource m5249_smc91x_resources[] = {
+ {
+ .start = 0xe0000300,
+ .end = 0xe0000300 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MCFINTC2_GPIOIRQ6,
+ .end = MCFINTC2_GPIOIRQ6,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device m5249_smc91x = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(m5249_smc91x_resources),
+ .resource = m5249_smc91x_resources,
+};
+
+#endif /* CONFIG_M5249C3 */
+
+static struct platform_device *m5249_devices[] __initdata = {
+#ifdef CONFIG_M5249C3
+ &m5249_smc91x,
+#endif
+};
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m5249_qspi_init(void)
+{
+ /* QSPI irq setup */
+ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0,
+ MCF_MBAR + MCFSIM_QSPIICR);
+ mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI);
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+#ifdef CONFIG_M5249C3
+
+static void __init m5249_smc91x_init(void)
+{
+ u32 gpio;
+
+ /* Set the GPIO line as interrupt source for smc91x device */
+ gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+ writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE);
+
+ gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+ writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5);
+}
+
+#endif /* CONFIG_M5249C3 */
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+ mach_sched_init = hw_timer_init;
+
+#ifdef CONFIG_M5249C3
+ m5249_smc91x_init();
+#endif
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+ m5249_qspi_init();
+#endif
+}
+
+/***************************************************************************/
+
+static int __init init_BSP(void)
+{
+ platform_add_devices(m5249_devices, ARRAY_SIZE(m5249_devices));
+ return 0;
+}
+
+arch_initcall(init_BSP);
+
+/***************************************************************************/
projects / firefly-linux-kernel-4.4.55.git / commitdiff