viafb: set sync polarity for all output devices
authorFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Sun, 19 Sep 2010 01:20:19 +0000 (01:20 +0000)
committerFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Fri, 24 Sep 2010 02:15:18 +0000 (02:15 +0000)
This patch sets the sync polarity for all output devices, not only CRT.
This may give some people a working screen but only if lcd scaling and
centering are not used as it is currently too dificult to propagate a
different resolution (from what the application thinks) to the correct
output device. Hopefully this does not introduce regressions as the
polarity of non-CRT devices was completly ignored before.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Joseph Chan <JosephChan@via.com.tw>
drivers/video/via/hw.c

index d6bbb0a05c3e4a72d57dc89d489bcd49eb29b73b..00fecb579acc067752e29c94e2336767a38e5509 100644 (file)
@@ -2014,7 +2014,6 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
        int index = 0;
        int h_addr, v_addr;
        u32 pll_D_N;
-       u8 polarity = 0;
 
        for (i = 0; i < video_mode->mode_array; i++) {
                index = i;
@@ -2041,14 +2040,6 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
 
        h_addr = crt_reg.hor_addr;
        v_addr = crt_reg.ver_addr;
-
-       /* update polarity for CRT timing */
-       if (crt_table[index].h_sync_polarity == NEGATIVE)
-               polarity |= VIA_HSYNC_NEGATIVE;
-       if (crt_table[index].v_sync_polarity == NEGATIVE)
-               polarity |= VIA_VSYNC_NEGATIVE;
-       via_set_sync_polarity(VIA_CRT, polarity);
-
        if (set_iga == IGA1) {
                viafb_unlock_crt();
                viafb_write_reg(CR09, VIACR, 0x00);     /*initial CR09=0 */
@@ -2352,6 +2343,17 @@ static void set_display_channel(void)
        }
 }
 
+static u8 get_sync(struct fb_info *info)
+{
+       u8 polarity = 0;
+
+       if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+               polarity |= VIA_HSYNC_NEGATIVE;
+       if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+               polarity |= VIA_VSYNC_NEGATIVE;
+       return polarity;
+}
+
 int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
        struct VideoModeTable *vmode_tbl1, int video_bpp1)
 {
@@ -2566,6 +2568,15 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
                        viafb_DeviceStatus = CRT_Device;
        }
        device_on();
+       if (!viafb_dual_fb)
+               via_set_sync_polarity(devices, get_sync(viafbinfo));
+       else {
+               via_set_sync_polarity(viaparinfo->shared->iga1_devices,
+                       get_sync(viafbinfo));
+               via_set_sync_polarity(viaparinfo->shared->iga2_devices,
+                       get_sync(viafbinfo1));
+       }
+
        via_set_state(devices, VIA_STATE_ON);
        device_screen_on();
        return 1;
@@ -2719,4 +2730,9 @@ void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
            crt_reg.ver_total - (crt_reg.ver_sync_start + crt_reg.ver_sync_end);
        var->lower_margin = crt_reg.ver_sync_start - crt_reg.ver_addr;
        var->vsync_len = crt_reg.ver_sync_end;
+       var->sync = 0;
+       if (crt_timing[index].h_sync_polarity == POSITIVE)
+               var->sync |= FB_SYNC_HOR_HIGH_ACT;
+       if (crt_timing[index].v_sync_polarity == POSITIVE)
+               var->sync |= FB_SYNC_VERT_HIGH_ACT;
 }