armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
- armada-370-rd.dtb
+ armada-370-rd.dtb \
+ armada-370-synology-ds213j.dtb
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-xp-lenovo-ix4-300d.dtb \
armada-xp-matrix.dtb \
armada-xp-netgear-rn2120.dtb \
- armada-xp-openblocks-ax3-4.dtb
+ armada-xp-openblocks-ax3-4.dtb \
+ armada-xp-synology-ds414.dtb
dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-cubox-es.dtb \
clock-frequency = <100000>;
status = "okay";
audio_codec: audio-codec@4a {
+ #sound-dai-cells = <0>;
compatible = "cirrus,cs42l51";
reg = <0x4a>;
};
broken-cd;
};
- pinctrl {
- /*
- * These pins might be muxed as I2S by
- * the bootloader, but it conflicts
- * with the real I2S pins that are
- * muxed using i2s_pins. We must mux
- * those pins to a function other than
- * I2S.
- */
- pinctrl-0 = <&hog_pins1 &hog_pins2>;
- pinctrl-names = "default";
-
- hog_pins1: hog-pins1 {
- marvell,pins = "mpp6", "mpp8", "mpp10",
- "mpp12", "mpp13";
- marvell,function = "gpio";
- };
-
- hog_pins2: hog-pins2 {
- marvell,pins = "mpp5", "mpp7", "mpp9";
- marvell,function = "gpo";
- };
- };
-
usb@50000 {
status = "okay";
};
};
spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins2>;
+ pinctrl-names = "default";
status = "okay";
spi-flash@0 {
};
sound {
- compatible = "marvell,a370db-audio";
- marvell,audio-controller = <&audio_controller>;
- marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
- status = "okay";
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Armada 370 DB Audio";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Headphone", "Out Jack",
+ "Line", "In Jack";
+ simple-audio-card,routing =
+ "Out Jack", "HPL",
+ "Out Jack", "HPR",
+ "AIN1L", "In Jack",
+ "AIN1L", "In Jack";
+ status = "okay";
+
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 0>;
+ };
+
+ codec {
+ sound-dai = <&audio_codec>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 1>;
+ };
+
+ codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ simple-audio-card,dai-link@2 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 1>;
+ };
+
+ codec {
+ sound-dai = <&spdif_in>;
+ };
+ };
};
spdif_out: spdif-out {
- compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
};
spdif_in: spdif-in {
- compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dir";
+ };
+};
+
+&pinctrl {
+ /*
+ * These pins might be muxed as I2S by
+ * the bootloader, but it conflicts
+ * with the real I2S pins that are
+ * muxed using i2s_pins. We must mux
+ * those pins to a function other than
+ * I2S.
+ */
+ pinctrl-0 = <&hog_pins1 &hog_pins2>;
+ pinctrl-names = "default";
+
+ hog_pins1: hog-pins1 {
+ marvell,pins = "mpp6", "mpp8", "mpp10",
+ "mpp12", "mpp13";
+ marvell,function = "gpio";
+ };
+
+ hog_pins2: hog-pins2 {
+ marvell,pins = "mpp5", "mpp7", "mpp9";
+ marvell,function = "gpo";
};
};
status = "okay";
};
- pinctrl {
- pwr_led_pin: pwr-led-pin {
- marvell,pins = "mpp63";
- marvell,function = "gpo";
- };
-
- stat_led_pins: stat-led-pins {
- marvell,pins = "mpp64", "mpp65";
- marvell,function = "gpio";
- };
- };
-
gpio_leds {
compatible = "gpio-leds";
pinctrl-names = "default";
};
};
};
+
+&pinctrl {
+ pwr_led_pin: pwr-led-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ stat_led_pins: stat-led-pins {
+ marvell,pins = "mpp64", "mpp65";
+ marvell,function = "gpio";
+ };
+};
+
status = "okay";
};
- pinctrl {
- power_led_pin: power-led-pin {
- marvell,pins = "mpp57";
- marvell,function = "gpio";
- };
-
- sata1_led_pin: sata1-led-pin {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- sata2_led_pin: sata2-led-pin {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- backup_led_pin: backup-led-pin {
- marvell,pins = "mpp56";
- marvell,function = "gpio";
- };
-
- backup_button_pin: backup-button-pin {
- marvell,pins = "mpp58";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp6";
- marvell,function = "gpio";
- };
-
- poweroff: poweroff {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
- };
-
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};
+
+&pinctrl {
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "gpio";
+ };
+
+ sata1_led_pin: sata1-led-pin {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ sata2_led_pin: sata2-led-pin {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
+ poweroff: poweroff {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+};
status = "okay";
};
- pinctrl {
- poweroff: poweroff {
- marvell,pins = "mpp60";
- marvell,function = "gpio";
- };
-
- backup_button_pin: backup-button-pin {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
-
- backup_led_pin: backup-led-pin {
- marvell,pins = "mpp63";
- marvell,function = "gpo";
- };
-
- power_led_pin: power-led-pin {
- marvell,pins = "mpp64";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp65";
- marvell,function = "gpio";
- };
- };
-
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
};
+
+&pinctrl {
+ poweroff: poweroff {
+ marvell,pins = "mpp60";
+ marvell,function = "gpio";
+ };
+
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp65";
+ marvell,function = "gpio";
+ };
+};
};
internal-regs {
- pinctrl {
- fan_pins: fan-pins {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- led_pins: led-pins {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
- };
-
serial@12000 {
status = "okay";
};
phy0: ethernet-phy@0 {
reg = <0>;
};
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
ethernet@70000 {
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
- phy = <&phy1>;
phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
mvsdio@d4000 {
};
};
};
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð1>;
+ dsa,mii-bus = <&mdio>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+ };
+ };
};
+
+&pinctrl {
+ fan_pins: fan-pins {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ led_pins: led-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for Synology DS213j
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+ model = "Synology DS213j";
+ compatible = "synology,ds213j", "marvell,armada370",
+ "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+
+ /* RTC provided by Seiko S-35390A I2C RTC chip below */
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q064";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+
+ /*
+ * Warning!
+ *
+ * Synology u-boot uses its compiled-in environment
+ * and it seems Synology did not care to change u-boot
+ * default configuration in order to allow saving a
+ * modified environment at a sensible location. So,
+ * if you do a 'saveenv' under u-boot, your modified
+ * environment will be saved at 1MB after the start
+ * of the flash, i.e. in the middle of the uImage.
+ * For that reason, it is strongly advised not to
+ * change the default environment, unless you know
+ * what you are doing.
+ */
+ partition@00000000 { /* u-boot */
+ label = "RedBoot";
+ reg = <0x00000000 0x000c0000>; /* 768KB */
+ };
+
+ partition@000c0000 { /* uImage */
+ label = "zImage";
+ reg = <0x000c0000 0x002d0000>; /* 2880KB */
+ };
+
+ partition@00390000 { /* uInitramfs */
+ label = "rd.gz";
+ reg = <0x00390000 0x00440000>; /* 4250KB */
+ };
+
+ partition@007d0000 { /* MAC address and serial number */
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>; /* 64KB */
+ };
+ };
+ };
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* Main device RTC chip */
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ /* Connected to a header on device's PCB */
+ serial@12000 {
+ status = "okay";
+ };
+
+ /* Connected to a TI MSP430F2111 for power control */
+ serial@12100 {
+ status = "okay";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&coreclk 0>;
+ };
+
+ /* rear USB port, near reset button */
+ usb@50000 {
+ status = "okay";
+ };
+
+ /* rear USB port, near RJ45 port */
+ usb@51000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
+ };
+
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-fan-32-38 {
+ status = "okay";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
+ &fan_ctrl_high_pin &fan_alarm_pin>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
+ &gpio2 0 GPIO_ACTIVE_HIGH
+ &gpio2 1 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 1000 1
+ 1150 2
+ 1350 4
+ 1500 3
+ 1650 5
+ 1750 6
+ 1900 7 >;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&disk1_led_pin
+ &disk2_led_pin>;
+ pinctrl-names = "default";
+
+ disk1-led-amber {
+ label = "synology:amber:disk1";
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ disk2-led-amber {
+ label = "synology:amber:disk2";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+ pinctrl-names = "default";
+
+ sata1_regulator: sata1-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata2_regulator: sata2-regulator {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA2 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ disk1_led_pin: disk1-led-pin {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ disk2_led_pin: disk2-led-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ sata1_pwr_pin: sata1-pwr-pin {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ sata2_pwr_pin: sata2-pwr-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp60";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit0_pin: syno-id-bit0-pin {
+ marvell,pins = "mpp55";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit1_pin: syno-id-bit1-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit2_pin: syno-id-bit2-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit3_pin: syno-id-bit3-pin {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_low_pin: fan-ctrl-low-pin {
+ marvell,pins = "mpp65";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_mid_pin: fan-ctrl-mid-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_high_pin: fan-ctrl-high-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ fan_alarm_pin: fan-alarm-pin {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+};
status = "disabled";
};
- serial@12000 {
+ uart0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
clocks = <&coreclk 0>;
status = "disabled";
};
- serial@12100 {
+
+ uart1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
status = "disabled";
};
+ pinctrl: pin-ctrl@18000 {
+ reg = <0x18000 0x38>;
+ };
+
coredivclk: corediv-clock@18740 {
compatible = "marvell,armada-370-corediv-clock";
reg = <0x18740 0xc>;
status = "disabled";
};
- mdio {
+ mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
wt-override;
};
- i2c0: i2c@11000 {
- reg = <0x11000 0x20>;
+ /*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+ spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins1>;
+ pinctrl-names = "default";
};
- i2c1: i2c@11100 {
- reg = <0x11100 0x20>;
+ spi1: spi@10680 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
};
- system-controller@18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x100>;
+ i2c0: i2c@11000 {
+ reg = <0x11000 0x20>;
};
- pinctrl {
- compatible = "marvell,mv88f6710-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins1: sdio-pins1 {
- marvell,pins = "mpp9", "mpp11", "mpp12",
- "mpp13", "mpp14", "mpp15";
- marvell,function = "sd0";
- };
-
- sdio_pins2: sdio-pins2 {
- marvell,pins = "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52";
- marvell,function = "sd0";
- };
-
- sdio_pins3: sdio-pins3 {
- marvell,pins = "mpp48", "mpp49", "mpp50",
- "mpp51", "mpp52", "mpp53";
- marvell,function = "sd0";
- };
-
- i2c0_pins: i2c0-pins {
- marvell,pins = "mpp2", "mpp3";
- marvell,function = "i2c0";
- };
-
- i2s_pins1: i2s-pins1 {
- marvell,pins = "mpp5", "mpp6", "mpp7",
- "mpp8", "mpp9", "mpp10",
- "mpp12", "mpp13";
- marvell,function = "audio";
- };
-
- i2s_pins2: i2s-pins2 {
- marvell,pins = "mpp49", "mpp47", "mpp50",
- "mpp59", "mpp57", "mpp61",
- "mpp62", "mpp60", "mpp58";
- marvell,function = "audio";
- };
-
- mdio_pins: mdio-pins {
- marvell,pins = "mpp17", "mpp18";
- marvell,function = "ge";
- };
-
- ge0_rgmii_pins: ge0-rgmii-pins {
- marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11", "mpp12",
- "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "ge0";
- };
-
- ge1_rgmii_pins: ge1-rgmii-pins {
- marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
- "mpp23", "mpp24", "mpp25", "mpp26",
- "mpp27", "mpp28", "mpp29", "mpp30";
- marvell,function = "ge1";
- };
+ i2c1: i2c@11100 {
+ reg = <0x11100 0x20>;
};
gpio0: gpio@18100 {
interrupts = <91>;
};
+ /*
+ * Default UART pinctrl setting without RTS/CTS, can
+ * be overwritten on board level if a different
+ * configuration is used.
+ */
+ uart0: serial@12000 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ };
+
+ uart1: serial@12100 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ };
+
+ system-controller@18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x100>;
+ };
+
gateclk: clock-gating-control@18220 {
compatible = "marvell,armada-370-gating-clock";
reg = <0x18220 0x4>;
};
audio_controller: audio-controller@30000 {
+ #sound-dai-cells = <1>;
compatible = "marvell,armada370-audio";
reg = <0x30000 0x4000>;
interrupts = <93>;
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6710-pinctrl";
+
+ spi0_pins1: spi0-pins1 {
+ marvell,pins = "mpp33", "mpp34",
+ "mpp35", "mpp36";
+ marvell,function = "spi0";
+ };
+
+ spi0_pins2: spi0_pins2 {
+ marvell,pins = "mpp32", "mpp63",
+ "mpp64", "mpp65";
+ marvell,function = "spi0";
+ };
+
+ spi1_pins: spi1-pins {
+ marvell,pins = "mpp49", "mpp50",
+ "mpp51", "mpp52";
+ marvell,function = "spi1";
+ };
+
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "uart0";
+ };
+
+ uart1_pins: uart1-pins {
+ marvell,pins = "mpp41", "mpp42";
+ marvell,function = "uart1";
+ };
+
+ sdio_pins1: sdio-pins1 {
+ marvell,pins = "mpp9", "mpp11", "mpp12",
+ "mpp13", "mpp14", "mpp15";
+ marvell,function = "sd0";
+ };
+
+ sdio_pins2: sdio-pins2 {
+ marvell,pins = "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52";
+ marvell,function = "sd0";
+ };
+
+ sdio_pins3: sdio-pins3 {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp51", "mpp52", "mpp53";
+ marvell,function = "sd0";
+ };
+
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp2", "mpp3";
+ marvell,function = "i2c0";
+ };
+
+ i2s_pins1: i2s-pins1 {
+ marvell,pins = "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10",
+ "mpp12", "mpp13";
+ marvell,function = "audio";
+ };
+
+ i2s_pins2: i2s-pins2 {
+ marvell,pins = "mpp49", "mpp47", "mpp50",
+ "mpp59", "mpp57", "mpp61",
+ "mpp62", "mpp60", "mpp58";
+ marvell,function = "audio";
+ };
+
+ mdio_pins: mdio-pins {
+ marvell,pins = "mpp17", "mpp18";
+ marvell,function = "ge";
+ };
+
+ ge0_rgmii_pins: ge0-rgmii-pins {
+ marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11", "mpp12",
+ "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "ge0";
+ };
+
+ ge1_rgmii_pins: ge1-rgmii-pins {
+ marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27", "mpp28", "mpp29", "mpp30";
+ marvell,function = "ge1";
+ };
+};
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
#clock-cells = <1>;
};
+ usbcluster: usb-cluster@18400 {
+ compatible = "marvell,armada-375-usb-cluster";
+ reg = <0x18400 0x4>;
+ #phy-cells = <1>;
+ };
+
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
reg = <0x20000 0x100>, <0x20180 0x20>;
reg = <0x50000 0x500>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 18>;
+ phys = <&usbcluster PHY_TYPE_USB2>;
+ phy-names = "usb";
status = "disabled";
};
reg = <0x58000 0x20000>,<0x5b880 0x80>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 16>;
+ phys = <&usbcluster PHY_TYPE_USB3>;
+ phy-names = "usb";
status = "disabled";
};
};
sdhci@d8000 {
- clock-frequency = <200000000>;
broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";
+ no-1-8-v;
};
usb3@f0000 {
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
- eth0 = ð0;
- eth1 = ð1;
- eth2 = ð2;
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ ethernet2 = ð2;
};
soc {
spi0: spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
marvell,function = "gpio";
};
- pmx_spi: pmx-spi {
- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
- marvell,function = "spi";
- };
-
pmx_phy_int: pmx-phy-int {
marvell,pins = "mpp32";
marvell,function = "gpio";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
memory {
--- /dev/null
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Synology DS414";
+ compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+ "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /*
+ * Connected to Marvell 88SX7042 SATA-II controller
+ * handling the four disks.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /*
+ * Connected to EtronTech EJ168A XHCI controller
+ * providing the two rear USB 3.0 ports.
+ */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+
+ /* RTC is provided by Seiko S-35390A below */
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q064";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+
+ /*
+ * Warning!
+ *
+ * Synology u-boot uses its compiled-in environment
+ * and it seems Synology did not care to change u-boot
+ * default configuration in order to allow saving a
+ * modified environment at a sensible location. So,
+ * if you do a 'saveenv' under u-boot, your modified
+ * environment will be saved at 1MB after the start
+ * of the flash, i.e. in the middle of the uImage.
+ * For that reason, it is strongly advised not to
+ * change the default environment, unless you know
+ * what you are doing.
+ */
+ partition@00000000 { /* u-boot */
+ label = "RedBoot";
+ reg = <0x00000000 0x000d0000>; /* 832KB */
+ };
+
+ partition@000c0000 { /* uImage */
+ label = "zImage";
+ reg = <0x000d0000 0x002d0000>; /* 2880KB */
+ };
+
+ partition@003a0000 { /* uInitramfs */
+ label = "rd.gz";
+ reg = <0x003a0000 0x00430000>; /* 4250KB */
+ };
+
+ partition@007d0000 { /* MAC address and serial number */
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>; /* 64KB */
+ };
+ };
+ };
+
+ i2c@11000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ /* Connected to a header on device's PCB. This
+ * provides the main console for the device.
+ *
+ * Warning: the device may not boot with a 3.3V
+ * USB-serial converter connected when the power
+ * button is pressed. The converter needs to be
+ * connected a few seconds after pressing the
+ * power button. This is possibly due to UART0_TXD
+ * pin being sampled at reset (bit 0 of SAR).
+ */
+ serial@12000 {
+ status = "okay";
+ };
+
+ /* Connected to a Microchip PIC16F883 for power control */
+ serial@12100 {
+ status = "okay";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&coreclk 0>;
+ };
+
+ /* Front USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ pinctrl-0 = <&pmx_ge0_rgmii>;
+ pinctrl-names = "default";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ pinctrl-0 = <&pmx_ge1_rgmii>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
+ &sata3_pwr_pin &sata4_pwr_pin>;
+ pinctrl-names = "default";
+
+ sata1_regulator: sata1-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata2_regulator: sata2-regulator {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA2 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata3_regulator: sata3-regulator {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "SATA3 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <6000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata4_regulator: sata4-regulator {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "SATA4 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <8000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ sata1_pwr_pin: sata1-pwr-pin {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ sata2_pwr_pin: sata2-pwr-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ sata3_pwr_pin: sata3-pwr-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ sata4_pwr_pin: sata4-pwr-pin {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ sata3_pres_pin: sata3-pres-pin {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ sata4_pres_pin: sata4-pres-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit0_pin: syno-id-bit0-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ pmx_syno_id_bit1: syno-id-bit1-pin {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ pmx_syno_id_bit2: syno-id-bit2-pin {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan1_alarm: fan1-alarm-pin {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ fan2_alarm_pin: fan2-alarm-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
wt-override;
};
+ spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ };
+
i2c0: i2c@11000 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
reg = <0x11100 0x100>;
};
- serial@12200 {
+ uart2: serial@12200 {
compatible = "snps,dw-apb-uart";
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
reg = <0x12200 0x100>;
reg-shift = <2>;
interrupts = <43>;
clocks = <&coreclk 0>;
status = "disabled";
};
- serial@12300 {
+
+ uart3: serial@12300 {
compatible = "snps,dw-apb-uart";
+ pinctrl-0 = <&uart3_pins>;
+ pinctrl-names = "default";
reg = <0x12300 0x100>;
reg-shift = <2>;
interrupts = <44>;
status = "disabled";
};
- pinctrl: pin-ctrl@18000 {
- reg = <0x18000 0x38>;
-
- pmx_ge0_gmii: pmx-ge0-gmii {
- marvell,pins =
- "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp6", "mpp7",
- "mpp8", "mpp9", "mpp10", "mpp11",
- "mpp12", "mpp13", "mpp14", "mpp15",
- "mpp16", "mpp17", "mpp18", "mpp19",
- "mpp20", "mpp21", "mpp22", "mpp23";
- marvell,function = "ge0";
- };
-
- pmx_ge0_rgmii: pmx-ge0-rgmii {
- marvell,pins =
- "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp6", "mpp7",
- "mpp8", "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
-
- pmx_ge1_rgmii: pmx-ge1-rgmii {
- marvell,pins =
- "mpp12", "mpp13", "mpp14", "mpp15",
- "mpp16", "mpp17", "mpp18", "mpp19",
- "mpp20", "mpp21", "mpp22", "mpp23";
- marvell,function = "ge1";
- };
-
- sdio_pins: sdio-pins {
- marvell,pins = "mpp30", "mpp31", "mpp32",
- "mpp33", "mpp34", "mpp35";
- marvell,function = "sd0";
- };
- };
-
system-controller@18200 {
compatible = "marvell,armada-370-xp-system-controller";
reg = <0x18200 0x500>;
};
};
};
+
+&pinctrl {
+ pmx_ge0_gmii: pmx-ge0-gmii {
+ marvell,pins =
+ "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11",
+ "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge0";
+ };
+
+ pmx_ge0_rgmii: pmx-ge0-rgmii {
+ marvell,pins =
+ "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+
+ pmx_ge1_rgmii: pmx-ge1-rgmii {
+ marvell,pins =
+ "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge1";
+ };
+
+ sdio_pins: sdio-pins {
+ marvell,pins = "mpp30", "mpp31", "mpp32",
+ "mpp33", "mpp34", "mpp35";
+ marvell,function = "sd0";
+ };
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp36", "mpp37",
+ "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+
+ uart2_pins: uart2-pins {
+ marvell,pins = "mpp42", "mpp43";
+ marvell,function = "uart2";
+ };
+
+ uart3_pins: uart3-pins {
+ marvell,pins = "mpp44", "mpp45";
+ marvell,function = "uart3";
+ };
+};
s35390a: s35390a@30 {
status = "disabled";
- compatible = "ssi,s35390a";
+ compatible = "sii,s35390a";
reg = <0x30>;
};
};