regulator: rockchip: lp8752: support lp8752 regulator
authorElaine Zhang <zhangqing@rock-chips.com>
Tue, 26 Apr 2016 08:03:58 +0000 (16:03 +0800)
committerJianqun Xu <jay.xu@rock-chips.com>
Tue, 26 Apr 2016 13:18:32 +0000 (21:18 +0800)
updata lp8752 driver.
add devicetree bindings for lp8752.

Change-Id: I21cdbde985d4663862b56c28429c41d9d3c38c36
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Documentation/devicetree/bindings/regulator/lp8752.txt [new file with mode: 0644]
drivers/regulator/Kconfig
drivers/regulator/Makefile
drivers/regulator/lp8752.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/regulator/lp8752.txt b/Documentation/devicetree/bindings/regulator/lp8752.txt
new file mode 100644 (file)
index 0000000..9b93964
--- /dev/null
@@ -0,0 +1,44 @@
+Binding for TI/National Semiconductor LP8752 Driver
+
+Required properties:
+  - compatible: "ti,lp8752"
+  - reg: I2C slave address. 0x60 = LP8752
+
+Optional properties:
+  Sub nodes for regulator_init_data
+    LP8752 has maximum 4 nodes. (child name: buck0 ~ 3)
+    For more details, please see the following binding document.
+    (Documentation/devicetree/bindings/regulator/regulator.txt)
+
+Datasheet
+  - LP8752: http://www.ti.com/lit/ds/symlink/lp8752.pdf
+
+Example 1) LP8752
+
+lp8752: lp8752@60 {
+       compatible = "ti,lp8752";
+       status = "disabled";
+       reg = <0x60>;
+
+       vin0-supply = <&vcc5v0_sys>;
+       vin1-supply = <&vcc5v0_sys>;
+       /.............../
+
+       regulators {
+               lp8752_buck0: lp8752_buck0 {
+                       regulator-name = "lp8752_buck0";
+                       regulator-min-microvolt = <735000>;
+                       regulator-max-microvolt = <1400000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+               };
+               lp8752_buck1: lp8752_buck1 {
+                       regulator-name = "lp8752_buck1";
+                       regulator-min-microvolt = <735000>;
+                       regulator-max-microvolt = <1400000>;
+                       regulator-always-on;
+                       regulator-boot-on;
+               };
+               /....../
+       };
+};
index b4c75150267ec69bbdfef72cfc4e54de9c45353f..06850e7366db5f7aa3eb93b8f4c1bbe74f42c226 100644 (file)
@@ -295,6 +295,15 @@ config REGULATOR_LP872X
        help
          This driver supports LP8720/LP8725 PMIC
 
+config REGULATOR_LP8752
+       tristate "TI LP8752 High Performance PMU driver"
+       depends on I2C
+       select REGMAP_I2C
+       help
+         This driver supports LP8752 High Performance PMU driver. This
+         chip contains four step-down DC/DC converters which can support
+         4 mode multiphase configuration.
+
 config REGULATOR_LP8755
        tristate "TI LP8755 High Performance PMU driver"
        depends on I2C
index cb58603cd449e7cee7fa9638306285cb3bc65b50..dc36c25f5f4b408ebf39ea452046b1eae86ceb29 100644 (file)
@@ -41,6 +41,7 @@ obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
+obj-$(CONFIG_REGULATOR_LP8752) += lp8752.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
 obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
 obj-$(CONFIG_REGULATOR_MAX14577) += max14577.o
diff --git a/drivers/regulator/lp8752.c b/drivers/regulator/lp8752.c
new file mode 100644 (file)
index 0000000..6222f72
--- /dev/null
@@ -0,0 +1,311 @@
+/*
+ * LP8752 High Performance Power Management Unit : System Interface Driver
+ *
+ * Author: zhangqing <zhangqing@rock-chips.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/regmap.h>
+#include <linux/uaccess.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/regulator/machine.h>
+
+#define LP8752_CTRL_BUCK0              0x02
+#define LP8752_CTRL_BUCK1              0x04
+#define LP8752_CTRL_BUCK2              0x06
+#define LP8752_CTRL_BUCK3              0x08
+
+#define LP8752_VOUT_BUCK0              0x0a
+#define LP8752_VOUT_BUCK1              0x0c
+#define LP8752_VOUT_BUCK2              0x0e
+#define LP8752_VOUT_BUCK3              0x10
+
+#define LP8752_BUCK_VSEL_MASK          0xff
+#define LP8752_REG_MAX                 0x2f
+
+enum lp8752_bucks {
+       LP8752_BUCK0 = 0,
+       LP8752_BUCK1,
+       LP8752_BUCK2,
+       LP8752_BUCK3,
+       LP8752_BUCK_MAX,
+};
+
+static const struct regulator_linear_range lp8752_buck_voltage_ranges[] = {
+       REGULATOR_LINEAR_RANGE(500000, 0, 23, 10000),
+       REGULATOR_LINEAR_RANGE(735000, 24, 157, 5000),
+       REGULATOR_LINEAR_RANGE(1420000, 158, 255, 20000),
+};
+
+struct lp8752_platform_data {
+       int nphase;
+       struct device_node *of_node[LP8752_BUCK_MAX];
+       struct regulator_desc desc;
+       struct regulator_init_data *buck_data[LP8752_BUCK_MAX];
+};
+
+struct lp8752_mphase {
+       int nreg;
+       int buck_id[LP8752_BUCK_MAX];
+};
+
+struct lp8752_chip {
+       int nphase;
+       struct device *dev;
+       struct regmap *regmap;
+       struct lp8752_platform_data *pdata;
+       struct regulator_dev *rdev[LP8752_BUCK_MAX];
+};
+
+static int lp8752_buck_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+       struct lp8752_chip *pchip = rdev_get_drvdata(rdev);
+       u8 msk = BIT(1);
+       int ret;
+
+       switch (mode) {
+       case REGULATOR_MODE_FAST:
+               /* forced pwm mode */
+               ret = regmap_update_bits(pchip->regmap,
+                                        rdev->desc->enable_reg,
+                                        msk, 0x1);
+       case REGULATOR_MODE_NORMAL:
+               /* automatic pwm/pfm mode */
+               ret = regmap_update_bits(pchip->regmap,
+                                        rdev->desc->enable_reg,
+                                        msk, 0x0);
+       default:
+               break;
+       }
+
+       return ret;
+}
+
+static unsigned int lp8752_buck_get_mode(struct regulator_dev *rdev)
+{
+       struct lp8752_chip *pchip = rdev_get_drvdata(rdev);
+       int ret;
+       unsigned int reg;
+
+       ret = regmap_read(pchip->regmap, rdev->desc->enable_reg, &reg);
+       if (ret < 0) {
+               dev_err(pchip->dev, "i2c acceess error %s\n", __func__);
+               return ret;
+       }
+
+       return (reg & BIT(1)) ?  REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
+}
+
+static struct regulator_ops lp8752_buck_ops = {
+       .map_voltage = regulator_map_voltage_linear_range,
+       .list_voltage = regulator_list_voltage_linear_range,
+       .set_voltage_sel = regulator_set_voltage_sel_regmap,
+       .get_voltage_sel = regulator_get_voltage_sel_regmap,
+       .enable = regulator_enable_regmap,
+       .disable = regulator_disable_regmap,
+       .is_enabled = regulator_is_enabled_regmap,
+       .set_mode = lp8752_buck_set_mode,
+       .get_mode = lp8752_buck_get_mode,
+};
+
+#define lp8752_rail(_id) "lp8752_buck"#_id
+#define vin(_id) "vin"#_id
+
+static const struct lp8752_mphase mphase_buck[] = {
+       { 1, { LP8752_BUCK0} },
+       { 2, { LP8752_BUCK0, LP8752_BUCK3 } },
+       { 3, { LP8752_BUCK0, LP8752_BUCK2, LP8752_BUCK3 } },
+       { 4, { LP8752_BUCK0, LP8752_BUCK1, LP8752_BUCK2, LP8752_BUCK3 } },
+};
+
+static struct of_regulator_match lp8752_reg_matches[] = {
+       { .name = "lp8752_buck0", .driver_data = (void *)0 },
+       { .name = "lp8752_buck1", .driver_data = (void *)1 },
+       { .name = "lp8752_buck2", .driver_data = (void *)2 },
+       { .name = "lp8752_buck3", .driver_data = (void *)3 },
+};
+
+static int lp8752_init_data(struct lp8752_chip *pchip)
+{
+       int icnt, buck_id, count;
+       struct lp8752_platform_data *pdata = pchip->pdata;
+       struct device_node *regs, *lp8752_np;
+
+       lp8752_np = of_node_get(pchip->dev->of_node);
+       if (!lp8752_np) {
+               dev_err(pchip->dev, "Failed to find device node\n");
+               return -ENODEV;
+       }
+
+       regs = of_find_node_by_name(lp8752_np, "regulators");
+       if (!regs)
+               return -ENODEV;
+
+       count = of_regulator_match(pchip->dev, regs, lp8752_reg_matches,
+                                  LP8752_BUCK_MAX);
+       of_node_put(regs);
+       if ((count <= 0) || (count > LP8752_BUCK_MAX))
+               return -ENODEV;
+
+       pchip->nphase = (count - 1) & 0xf;
+
+       /* set default data based on multi-phase config */
+       for (icnt = 0; icnt < mphase_buck[pchip->nphase].nreg; icnt++) {
+               buck_id = mphase_buck[pchip->nphase].buck_id[icnt];
+               pdata->buck_data[buck_id] =
+               lp8752_reg_matches[buck_id].init_data;
+               pdata->of_node[buck_id] = lp8752_reg_matches[buck_id].of_node;
+       }
+
+       return 0;
+}
+
+#define lp8752_buck_desc(_id)\
+{\
+       .name = lp8752_rail(_id),\
+       .id   = LP8752_BUCK##_id,\
+       .supply_name = vin(_id),\
+       .ops  = &lp8752_buck_ops,\
+       .n_voltages = LP8752_BUCK_VSEL_MASK + 1,\
+       .linear_ranges = lp8752_buck_voltage_ranges,\
+       .n_linear_ranges = ARRAY_SIZE(lp8752_buck_voltage_ranges),\
+       .type = REGULATOR_VOLTAGE,\
+       .enable_reg = LP8752_CTRL_BUCK##_id,\
+       .enable_mask = BIT(7),\
+       .vsel_reg = LP8752_VOUT_BUCK##_id,\
+       .vsel_mask = LP8752_BUCK_VSEL_MASK,\
+       .enable_time = 400,\
+       .owner = THIS_MODULE,\
+}
+
+static struct regulator_desc lp8752_reg_desc[] = {
+       lp8752_buck_desc(0),
+       lp8752_buck_desc(1),
+       lp8752_buck_desc(2),
+       lp8752_buck_desc(3),
+};
+
+static int lp8752_regulator_init(struct lp8752_chip *pchip)
+{
+       int ret, icnt, buck_id;
+       struct lp8752_platform_data *pdata = pchip->pdata;
+       struct regulator_config rconfig = { };
+
+       rconfig.regmap = pchip->regmap;
+       rconfig.dev = pchip->dev;
+       rconfig.driver_data = pchip;
+
+       for (icnt = 0; icnt < mphase_buck[pchip->nphase].nreg; icnt++) {
+               buck_id = mphase_buck[pchip->nphase].buck_id[icnt];
+               rconfig.init_data = pdata->buck_data[buck_id];
+               rconfig.of_node = pdata->of_node[buck_id];
+               pchip->rdev[buck_id] =
+               devm_regulator_register(pchip->dev,
+                                       &lp8752_reg_desc[buck_id],
+                                       &rconfig);
+               if (IS_ERR(pchip->rdev[buck_id])) {
+                       ret = PTR_ERR(pchip->rdev[buck_id]);
+                       pchip->rdev[buck_id] = NULL;
+                       dev_err(pchip->dev, "regulator init failed: buck %d\n",
+                               buck_id);
+                       return ret;
+               }
+       }
+
+       return 0;
+}
+
+static const struct regmap_config lp8752_regmap = {
+       .reg_bits = 8,
+       .val_bits = 8,
+       .max_register = LP8752_REG_MAX,
+};
+
+static int lp8752_probe(struct i2c_client *client,
+                       const struct i2c_device_id *id)
+{
+       int ret;
+       struct lp8752_chip *pchip;
+       struct lp8752_platform_data *pdata = dev_get_platdata(&client->dev);
+
+       pchip = devm_kzalloc(&client->dev,
+                            sizeof(struct lp8752_chip), GFP_KERNEL);
+       if (!pchip)
+               return -ENOMEM;
+
+       pchip->dev = &client->dev;
+       pchip->regmap = devm_regmap_init_i2c(client, &lp8752_regmap);
+       if (IS_ERR(pchip->regmap)) {
+               ret = PTR_ERR(pchip->regmap);
+               dev_err(&client->dev, "fail to allocate regmap %d\n", ret);
+               return ret;
+       }
+       i2c_set_clientdata(client, pchip);
+
+       ret = regmap_update_bits(pchip->regmap,
+                                LP8752_CTRL_BUCK0,
+                                (1 << 0), 0x1);
+       ret = regmap_update_bits(pchip->regmap,
+                                LP8752_CTRL_BUCK2,
+                                (1 << 0), 0x1);
+
+       if (!pdata) {
+               pchip->pdata = devm_kzalloc(pchip->dev,
+                                           sizeof(struct lp8752_platform_data),
+                                           GFP_KERNEL);
+               if (!pchip->pdata)
+                       return -ENOMEM;
+
+               ret = lp8752_init_data(pchip);
+               if (ret < 0) {
+                       dev_err(&client->dev, "fail to initialize chip\n");
+                       return ret;
+               }
+       } else {
+               pchip->pdata = pdata;
+               pchip->nphase = pdata->nphase;
+       }
+
+       lp8752_regulator_init(pchip);
+
+       return 0;
+}
+
+static const struct of_device_id lp8752_of_match[] = {
+       { .compatible = "ti,lp8752", },
+       {},
+};
+MODULE_DEVICE_TABLE(of, lp8752_of_match);
+
+static const struct i2c_device_id lp8752_id[] = {
+       {"lp8752", 0},
+       {}
+};
+MODULE_DEVICE_TABLE(i2c, lp8752_id);
+
+static struct i2c_driver lp8752_i2c_driver = {
+       .probe = lp8752_probe,
+       .id_table = lp8752_id,
+       .driver = {
+               .name = "lp8752",
+               .of_match_table = of_match_ptr(lp8752_of_match),
+       },
+};
+
+module_i2c_driver(lp8752_i2c_driver);
+
+MODULE_DESCRIPTION("Texas Instruments lp8752 driver");
+MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>");
+MODULE_LICENSE("GPL v2");