[MMC] sdhci: fix interrupt handling
authorPierre Ossman <drzeus@drzeus.cx>
Fri, 30 Jun 2006 09:22:26 +0000 (02:22 -0700)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sun, 2 Jul 2006 15:02:05 +0000 (16:02 +0100)
The specification says that interrupts should be cleared before the source is
removed.  We should also not set unknown bits.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
drivers/mmc/sdhci.c

index 4457881596473b3c55d818a52865639e8947a27a..b9aa60aed7f04666e111432cdca4d9caa0ef64ae 100644 (file)
@@ -124,7 +124,12 @@ static void sdhci_init(struct sdhci_host *host)
 
        sdhci_reset(host, SDHCI_RESET_ALL);
 
-       intmask = ~(SDHCI_INT_CARD_INT | SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
+       intmask = SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT |
+               SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX |
+               SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT |
+               SDHCI_INT_CARD_REMOVE | SDHCI_INT_CARD_INSERT |
+               SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL |
+               SDHCI_INT_DMA_END | SDHCI_INT_DATA_END | SDHCI_INT_RESPONSE;
 
        writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
        writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
@@ -360,7 +365,6 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
 static void sdhci_finish_data(struct sdhci_host *host)
 {
        struct mmc_data *data;
-       u32 intmask;
        u16 blocks;
 
        BUG_ON(!host->data);
@@ -371,14 +375,6 @@ static void sdhci_finish_data(struct sdhci_host *host)
        if (host->flags & SDHCI_USE_DMA) {
                pci_unmap_sg(host->chip->pdev, data->sg, data->sg_len,
                        (data->flags & MMC_DATA_READ)?PCI_DMA_FROMDEVICE:PCI_DMA_TODEVICE);
-       } else {
-               intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
-               intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
-               writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
-               intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
-               intmask &= ~(SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL);
-               writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
        }
 
        /*
@@ -512,31 +508,9 @@ static void sdhci_finish_command(struct sdhci_host *host)
 
        DBG("Ending cmd (%x)\n", host->cmd->opcode);
 
-       if (host->cmd->data) {
-               u32 intmask;
-
+       if (host->cmd->data)
                host->data = host->cmd->data;
-
-               if (!(host->flags & SDHCI_USE_DMA)) {
-                       /*
-                        * Don't enable the interrupts until now to make sure we
-                        * get stable handling of the FIFO.
-                        */
-                       intmask = readl(host->ioaddr + SDHCI_INT_ENABLE);
-                       intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
-                       writel(intmask, host->ioaddr + SDHCI_INT_ENABLE);
-
-                       intmask = readl(host->ioaddr + SDHCI_SIGNAL_ENABLE);
-                       intmask |= SDHCI_INT_BUF_EMPTY | SDHCI_INT_BUF_FULL;
-                       writel(intmask, host->ioaddr + SDHCI_SIGNAL_ENABLE);
-
-                       /*
-                        * The buffer interrupts are to unreliable so we
-                        * start the transfer immediatly.
-                        */
-                       sdhci_transfer_pio(host);
-               }
-       } else
+       else
                tasklet_schedule(&host->finish_tasklet);
 
        host->cmd = NULL;
@@ -914,50 +888,44 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id, struct pt_regs *regs)
 
        DBG("*** %s got interrupt: 0x%08x\n", host->slot_descr, intmask);
 
-       if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE))
+       if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
+               writel(intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE),
+                       host->ioaddr + SDHCI_INT_STATUS);
                tasklet_schedule(&host->card_tasklet);
+       }
 
-       if (intmask & SDHCI_INT_CMD_MASK) {
-               sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
+       intmask &= ~(SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE);
 
+       if (intmask & SDHCI_INT_CMD_MASK) {
                writel(intmask & SDHCI_INT_CMD_MASK,
                        host->ioaddr + SDHCI_INT_STATUS);
+               sdhci_cmd_irq(host, intmask & SDHCI_INT_CMD_MASK);
        }
 
        if (intmask & SDHCI_INT_DATA_MASK) {
-               sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
-
                writel(intmask & SDHCI_INT_DATA_MASK,
                        host->ioaddr + SDHCI_INT_STATUS);
+               sdhci_data_irq(host, intmask & SDHCI_INT_DATA_MASK);
        }
 
        intmask &= ~(SDHCI_INT_CMD_MASK | SDHCI_INT_DATA_MASK);
 
-       if (intmask & SDHCI_INT_CARD_INT) {
-               printk(KERN_ERR "%s: Unexpected card interrupt. Please "
-                       "report this to " BUGMAIL ".\n",
-                       mmc_hostname(host->mmc));
-               sdhci_dumpregs(host);
-       }
-
        if (intmask & SDHCI_INT_BUS_POWER) {
-               printk(KERN_ERR "%s: Unexpected bus power interrupt. Please "
-                       "report this to " BUGMAIL ".\n",
+               printk(KERN_ERR "%s: Card is consuming too much power!\n",
                        mmc_hostname(host->mmc));
-               sdhci_dumpregs(host);
+               writel(SDHCI_INT_BUS_POWER, host->ioaddr + SDHCI_INT_STATUS);
        }
 
-       if (intmask & SDHCI_INT_ACMD12ERR) {
-               printk(KERN_ERR "%s: Unexpected auto CMD12 error. Please "
+       intmask &= SDHCI_INT_BUS_POWER;
+
+       if (intmask) {
+               printk(KERN_ERR "%s: Unexpected interrupt 0x%08x. Please "
                        "report this to " BUGMAIL ".\n",
-                       mmc_hostname(host->mmc));
+                       mmc_hostname(host->mmc), intmask);
                sdhci_dumpregs(host);
 
-               writew(~0, host->ioaddr + SDHCI_ACMD12_ERR);
-       }
-
-       if (intmask)
                writel(intmask, host->ioaddr + SDHCI_INT_STATUS);
+       }
 
        result = IRQ_HANDLED;