[PATCH] Remove CONFIG_PARPORT_ARC, drivers/parport/parport_arc.c
authorDomen Puncer <domen@coderock.org>
Fri, 23 Jun 2006 09:05:14 +0000 (02:05 -0700)
committerLinus Torvalds <torvalds@g5.osdl.org>
Fri, 23 Jun 2006 14:43:03 +0000 (07:43 -0700)
It's wasn't referenced in Makefile since at least 2.2.8, unbuildable due to
trivial typos and things like DATA_LATCH and arc_write_control() which
doesn't exist.

Adrian Bunk:
adapted the patch to unrelated context changes

Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/parport/Kconfig
drivers/parport/parport_arc.c [deleted file]

index 6c8452ede0e113c4c50c6a29620ba7adbb9391db..4d8dc27ea9d199043c36c85bdad8a3ca507135f8 100644 (file)
@@ -85,11 +85,6 @@ config PARPORT_PC_PCMCIA
 config PARPORT_NOT_PC
        bool
 
-config PARPORT_ARC
-       tristate "Archimedes hardware"
-       depends on ARM && PARPORT
-       select PARPORT_NOT_PC
-
 config PARPORT_IP32
        tristate "SGI IP32 builtin port (EXPERIMENTAL)"
        depends on SGI_IP32 && PARPORT && EXPERIMENTAL
diff --git a/drivers/parport/parport_arc.c b/drivers/parport/parport_arc.c
deleted file mode 100644 (file)
index b35bb4f..0000000
+++ /dev/null
@@ -1,139 +0,0 @@
-/* Low-level parallel port routines for Archimedes onboard hardware
- *
- * Author: Phil Blundell <philb@gnu.org>
- */
-
-/* This driver is for the parallel port hardware found on Acorn's old
- * range of Archimedes machines.  The A5000 and newer systems have PC-style
- * I/O hardware and should use the parport_pc driver instead.
- *
- * The Acorn printer port hardware is very simple.  There is a single 8-bit
- * write-only latch for the data port and control/status bits are handled
- * with various auxilliary input and output lines.  The port is not
- * bidirectional, does not support any modes other than SPP, and has only
- * a subset of the standard printer control lines connected.
- */
-
-#include <linux/threads.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/parport.h>
-
-#include <asm/ptrace.h>
-#include <asm/io.h>
-#include <asm/arch/oldlatches.h>
-#include <asm/arch/irqs.h>
-
-#define DATA_ADDRESS    0x3350010
-
-/* This is equivalent to the above and only used for request_region. */
-#define PORT_BASE       0x80000000 | ((DATA_ADDRESS - IO_BASE) >> 2)
-
-/* The hardware can't read from the data latch, so we must use a soft
-   copy. */
-static unsigned char data_copy;
-
-/* These are pretty simple. We know the irq is never shared and the
-   kernel does all the magic that's required. */
-static void arc_enable_irq(struct parport *p)
-{
-       enable_irq(p->irq);
-}
-
-static void arc_disable_irq(struct parport *p)
-{
-       disable_irq(p->irq);
-}
-
-static void arc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
-       parport_generic_irq(irq, (struct parport *) dev_id, regs);
-}
-
-static void arc_write_data(struct parport *p, unsigned char data)
-{
-       data_copy = data;
-       outb_t(data, DATA_LATCH);
-}
-
-static unsigned char arc_read_data(struct parport *p)
-{
-       return data_copy;
-}
-
-static struct parport_operations parport_arc_ops = 
-{
-       .write_data     = arc_write_data,
-       .read_data      = arc_read_data,
-
-       .write_control  = arc_write_control,
-       .read_control   = arc_read_control,
-       .frob_control   = arc_frob_control,
-
-       .read_status    = arc_read_status,
-
-       .enable_irq     = arc_enable_irq,
-       .disable_irq    = arc_disable_irq,
-
-       .data_forward   = arc_data_forward,
-       .data_reverse   = arc_data_reverse,
-
-       .init_state     = arc_init_state,
-       .save_state     = arc_save_state,
-       .restore_state  = arc_restore_state,
-
-       .epp_write_data = parport_ieee1284_epp_write_data,
-       .epp_read_data  = parport_ieee1284_epp_read_data,
-       .epp_write_addr = parport_ieee1284_epp_write_addr,
-       .epp_read_addr  = parport_ieee1284_epp_read_addr,
-
-       .ecp_write_data = parport_ieee1284_ecp_write_data,
-       .ecp_read_data  = parport_ieee1284_ecp_read_data,
-       .ecp_write_addr = parport_ieee1284_ecp_write_addr,
-       
-       .compat_write_data      = parport_ieee1284_write_compat,
-       .nibble_read_data       = parport_ieee1284_read_nibble,
-       .byte_read_data         = parport_ieee1284_read_byte,
-
-       .owner          = THIS_MODULE,
-};
-
-/* --- Initialisation code -------------------------------- */
-
-static int parport_arc_init(void)
-{
-       /* Archimedes hardware provides only one port, at a fixed address */
-       struct parport *p;
-       struct resource res;
-       char *fake_name = "parport probe");
-
-       res = request_region(PORT_BASE, 1, fake_name);
-       if (res == NULL)
-               return 0;
-
-       p = parport_register_port (PORT_BASE, IRQ_PRINTERACK,
-                                  PARPORT_DMA_NONE, &parport_arc_ops);
-
-       if (!p) {
-               release_region(PORT_BASE, 1);
-               return 0;
-       }
-
-       p->modes = PARPORT_MODE_ARCSPP;
-       p->size = 1;
-       rename_region(res, p->name);
-
-       printk(KERN_INFO "%s: Archimedes on-board port, using irq %d\n",
-              p->irq);
-
-       /* Tell the high-level drivers about the port. */
-       parport_announce_port (p);
-
-       return 1;
-}
-
-module_init(parport_arc_init)