* tells us what other partitions to define. If there isn't, we use a default
* partition split defined below.
*
- * $Log: axisflashmap.c,v $
- * Revision 1.11 2004/11/15 10:27:14 starvik
- * Corrected typo (Thanks to Milton Miller <miltonm@bga.com>).
- *
- * Revision 1.10 2004/08/16 12:37:22 starvik
- * Merge of Linux 2.6.8
- *
- * Revision 1.8 2004/05/14 07:58:03 starvik
- * Merge of changes from 2.4
- *
- * Revision 1.6 2003/07/04 08:27:37 starvik
- * Merge of Linux 2.5.74
- *
- * Revision 1.5 2002/12/11 13:13:57 starvik
- * Added arch/ to v10 specific includes
- * Added fix from Linux 2.4 in serial.c (flush_to_flip_buffer)
- *
- * Revision 1.4 2002/11/20 11:56:10 starvik
- * Merge of Linux 2.5.48
- *
- * Revision 1.3 2002/11/13 14:54:13 starvik
- * Copied from linux 2.4
- *
- * Revision 1.28 2002/10/01 08:08:43 jonashg
- * The first partition ends at the start of the partition table.
- *
- * Revision 1.27 2002/08/21 09:23:13 jonashg
- * Speling.
- *
- * Revision 1.26 2002/08/21 08:35:20 jonashg
- * Cosmetic change to printouts.
- *
- * Revision 1.25 2002/08/21 08:15:42 jonashg
- * Made it compile even without CONFIG_MTD_CONCAT defined.
- *
- * Revision 1.24 2002/08/20 13:12:35 jonashg
- * * New approach to probing. Probe cse0 and cse1 separately and (mtd)concat
- * the results.
- * * Removed compile time tests concerning how the mtdram driver has been
- * configured. The user will know about the misconfiguration at runtime
- * instead. (The old approach made it impossible to use mtdram for anything
- * else than RAM boot).
- *
- * Revision 1.23 2002/05/13 12:12:28 johana
- * Allow compile without CONFIG_MTD_MTDRAM but warn at compiletime and
- * be informative at runtime.
- *
- * Revision 1.22 2002/05/13 10:24:44 johana
- * Added #if checks on MTDRAM CONFIG
- *
- * Revision 1.21 2002/05/06 16:05:20 johana
- * Removed debug printout.
- *
- * Revision 1.20 2002/05/06 16:03:00 johana
- * No more cramfs as root hack in generic code.
- * It's handled by axisflashmap using mtdram.
- *
- * Revision 1.19 2002/03/15 17:10:28 bjornw
- * Changed comment about cached access since we changed this before
- *
- * Revision 1.18 2002/03/05 17:06:15 jonashg
- * Try amd_flash probe before cfi_probe since amd_flash driver can handle two
- * (or more) flash chips of different model and the cfi driver cannot.
- *
- * Revision 1.17 2001/11/12 19:42:38 pkj
- * Fixed compiler warnings.
- *
- * Revision 1.16 2001/11/08 11:18:58 jonashg
- * Always read from uncached address to avoid problems with flushing
- * cachelines after write and MTD-erase. No performance loss have been
- * seen yet.
- *
- * Revision 1.15 2001/10/19 12:41:04 jonashg
- * Name of probe has changed in MTD.
- *
- * Revision 1.14 2001/09/21 07:14:10 jonashg
- * Made root filesystem (cramfs) use mtdblock driver when booting from flash.
- *
- * Revision 1.13 2001/08/15 13:57:35 jonashg
- * Entire MTD updated to the linux 2.4.7 version.
- *
- * Revision 1.12 2001/06/11 09:50:30 jonashg
- * Oops, 2MB is 0x200000 bytes.
- *
- * Revision 1.11 2001/06/08 11:39:44 jonashg
- * Changed sizes and offsets in axis_default_partitions to use
- * CONFIG_ETRAX_PTABLE_SECTOR.
- *
- * Revision 1.10 2001/05/29 09:42:03 jonashg
- * Use macro for end marker length instead of sizeof.
- *
- * Revision 1.9 2001/05/29 08:52:52 jonashg
- * Gave names to the magic fours (size of the ptable end marker).
- *
- * Revision 1.8 2001/05/28 15:36:20 jonashg
- * * Removed old comment about ptable location in flash (it's a CONFIG_ option).
- * * Variable ptable was initialized twice to the same value.
- *
- * Revision 1.7 2001/04/05 13:41:46 markusl
- * Updated according to review remarks
- *
- * Revision 1.6 2001/03/07 09:21:21 bjornw
- * No need to waste .data
- *
- * Revision 1.5 2001/03/06 16:27:01 jonashg
- * Probe the entire flash area for flash devices.
- *
- * Revision 1.4 2001/02/23 12:47:15 bjornw
- * Uncached flash in LOW_MAP moved from 0xe to 0x8
- *
- * Revision 1.3 2001/02/16 12:11:45 jonashg
- * MTD driver amd_flash is now included in MTD CVS repository.
- * (It's now in drivers/mtd).
- *
- * Revision 1.2 2001/02/09 11:12:22 jonashg
- * Support for AMD compatible non-CFI flash chips.
- * Only tested with Toshiba TC58FVT160 so far.
- *
- * Revision 1.1 2001/01/12 17:01:18 bjornw
- * * Added axisflashmap.c, a physical mapping for MTD that reads and understands
- * Axis partition-table format.
- *
- *
*/
#include <linux/module.h>
};
/* If no partition-table was found, we use this default-set. */
-#define MAX_PARTITIONS 7
+#define MAX_PARTITIONS 7
#define NUM_DEFAULT_PARTITIONS 3
/*
},
};
+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
+/* Main flash device */
+static struct mtd_partition main_partition = {
+ .name = "main",
+ .size = 0,
+ .offset = 0
+};
+#endif
+
/*
* Probe a chip select for AMD-compatible (JEDEC) or CFI-compatible flash
* chips in that order (because the amd_flash-driver is faster).
mtd_cs = do_map_probe("cfi_probe", map_cs);
#endif
#ifdef CONFIG_MTD_JEDECPROBE
- if (!mtd_cs) {
+ if (!mtd_cs)
mtd_cs = do_map_probe("jedec_probe", map_cs);
- }
#endif
return mtd_cs;
}
-/*
+/*
* Probe each chip select individually for flash chips. If there are chips on
* both cse0 and cse1, the mtd_info structs will be concatenated to one struct
* so that MTD partitions can cross chip boundries.
if (mtd_cse0 && mtd_cse1) {
#ifdef CONFIG_MTD_CONCAT
struct mtd_info *mtds[] = { mtd_cse0, mtd_cse1 };
-
+
/* Since the concatenation layer adds a small overhead we
* could try to figure out if the chips in cse0 and cse1 are
* identical and reprobe the whole cse0+cse1 window. But since
/* The best we can do now is to only use what we found
* at cse0.
- */
+ */
mtd_cse = mtd_cse0;
map_destroy(mtd_cse1);
}
struct partitiontable_head *ptable_head = NULL;
struct partitiontable_entry *ptable;
int use_default_ptable = 1; /* Until proven otherwise. */
- const char *pmsg = " /dev/flash%d at 0x%08x, size 0x%08x\n";
+ const char pmsg[] = " /dev/flash%d at 0x%08x, size 0x%08x\n";
if (!(mymtd = flash_probe())) {
/* There's no reason to use this module if no flash chip can
unsigned long offset = CONFIG_ETRAX_PTABLE_SECTOR;
unsigned char *p;
unsigned long csum = 0;
-
+
ptable = (struct partitiontable_entry *)
((unsigned long)ptable_head + sizeof(*ptable_head));
pidx++;
}
+#ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE
+ if (mymtd) {
+ main_partition.size = mymtd->size;
+ err = add_mtd_partitions(mymtd, &main_partition, 1);
+ if (err)
+ panic("axisflashmap: Could not initialize "
+ "partition for whole main mtd device!\n");
+ }
+#endif
+
if (mymtd) {
if (use_default_ptable) {
printk(KERN_INFO " Using default partition table.\n");
err = add_mtd_partitions(mymtd, axis_partitions, pidx);
}
- if (err) {
+ if (err)
panic("axisflashmap could not add MTD partitions!\n");
- }
}
if (!romfs_in_flash) {
#else
struct mtd_info *mtd_ram;
- mtd_ram = kmalloc(sizeof(struct mtd_info),
- GFP_KERNEL);
- if (!mtd_ram) {
+ mtd_ram = kmalloc(sizeof(struct mtd_info), GFP_KERNEL);
+ if (!mtd_ram)
panic("axisflashmap couldn't allocate memory for "
"mtd_info!\n");
- }
printk(KERN_INFO " Adding RAM partition for romfs image:\n");
- printk(pmsg, pidx, romfs_start, romfs_length);
-
- err = mtdram_init_device(mtd_ram, (void*)romfs_start,
- romfs_length, "romfs");
- if (err) {
+ printk(pmsg, pidx, (unsigned)romfs_start,
+ (unsigned)romfs_length);
+
+ err = mtdram_init_device(mtd_ram,
+ (void *)romfs_start,
+ romfs_length,
+ "romfs");
+ if (err)
panic("axisflashmap could not initialize MTD RAM "
"device!\n");
- }
#endif
}
-
return err;
}
projects / firefly-linux-kernel-4.4.55.git / commitdiff