MIPS: Alchemy: get rid of common/reset.c
authorManuel Lauss <manuel.lauss@googlemail.com>
Tue, 8 Dec 2009 18:18:13 +0000 (19:18 +0100)
committerRalf Baechle <ralf@linux-mips.org>
Sat, 27 Feb 2010 11:53:04 +0000 (12:53 +0100)
Implement reset / poweroff in the board code instead.  The peripheral reset
code is gone too since YAMON which all in-tree boards use does the same
work when it boots.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/783/
Patchwork: http://patchwork.linux-mips.org/patch/882/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/alchemy/common/Makefile
arch/mips/alchemy/common/reset.c [deleted file]
arch/mips/alchemy/common/setup.c
arch/mips/alchemy/devboards/db1200/setup.c
arch/mips/alchemy/devboards/db1x00/board_setup.c
arch/mips/alchemy/devboards/platform.c
arch/mips/alchemy/mtx-1/board_setup.c
arch/mips/alchemy/xxs1500/board_setup.c

index f46b351a961dc783094787cf5fe039c7d36f018c..06c0e65a54b5e079c1fd4f52ed71e289e68874c9 100644 (file)
@@ -5,8 +5,7 @@
 # Makefile for the Alchemy Au1xx0 CPUs, generic files.
 #
 
-obj-y += prom.o time.o reset.o \
-       clocks.o platform.o power.o setup.o \
+obj-y += prom.o time.o clocks.o platform.o power.o setup.o \
        sleeper.o dma.o dbdma.o
 
 obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o
diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c
deleted file mode 100644 (file)
index 266afd4..0000000
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *     Au1xx0 reset routines.
- *
- * Copyright 2001, 2006, 2008 MontaVista Software Inc.
- * Author: MontaVista Software, Inc. <source@mvista.com>
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/gpio.h>
-
-#include <asm/cacheflush.h>
-#include <asm/mach-au1x00/au1000.h>
-
-void au1000_restart(char *command)
-{
-       /* Set all integrated peripherals to disabled states */
-       extern void board_reset(void);
-       u32 prid = read_c0_prid();
-
-       printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
-
-       switch (prid & 0xFF000000) {
-       case 0x00000000: /* Au1000 */
-               au_writel(0x02, 0xb0000010); /* ac97_enable */
-               au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-               asm("sync");
-               au_writel(0x00, 0xb017fffc); /* usbh_enable */
-               au_writel(0x00, 0xb0200058); /* usbd_enable */
-               au_writel(0x00, 0xb0300040); /* ir_enable */
-               au_writel(0x00, 0xb4004104); /* mac dma */
-               au_writel(0x00, 0xb4004114); /* mac dma */
-               au_writel(0x00, 0xb4004124); /* mac dma */
-               au_writel(0x00, 0xb4004134); /* mac dma */
-               au_writel(0x00, 0xb0520000); /* macen0 */
-               au_writel(0x00, 0xb0520004); /* macen1 */
-               au_writel(0x00, 0xb1000008); /* i2s_enable  */
-               au_writel(0x00, 0xb1100100); /* uart0_enable */
-               au_writel(0x00, 0xb1200100); /* uart1_enable */
-               au_writel(0x00, 0xb1300100); /* uart2_enable */
-               au_writel(0x00, 0xb1400100); /* uart3_enable */
-               au_writel(0x02, 0xb1600100); /* ssi0_enable */
-               au_writel(0x02, 0xb1680100); /* ssi1_enable */
-               au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-               au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-               au_writel(0x00, 0xb1900028); /* sys_clksrc */
-               au_writel(0x10, 0xb1900060); /* sys_cpupll */
-               au_writel(0x00, 0xb1900064); /* sys_auxpll */
-               au_writel(0x00, 0xb1900100); /* sys_pininputen */
-               break;
-       case 0x01000000: /* Au1500 */
-               au_writel(0x02, 0xb0000010); /* ac97_enable */
-               au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-               asm("sync");
-               au_writel(0x00, 0xb017fffc); /* usbh_enable */
-               au_writel(0x00, 0xb0200058); /* usbd_enable */
-               au_writel(0x00, 0xb4004104); /* mac dma */
-               au_writel(0x00, 0xb4004114); /* mac dma */
-               au_writel(0x00, 0xb4004124); /* mac dma */
-               au_writel(0x00, 0xb4004134); /* mac dma */
-               au_writel(0x00, 0xb1520000); /* macen0 */
-               au_writel(0x00, 0xb1520004); /* macen1 */
-               au_writel(0x00, 0xb1100100); /* uart0_enable */
-               au_writel(0x00, 0xb1400100); /* uart3_enable */
-               au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-               au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-               au_writel(0x00, 0xb1900028); /* sys_clksrc */
-               au_writel(0x10, 0xb1900060); /* sys_cpupll */
-               au_writel(0x00, 0xb1900064); /* sys_auxpll */
-               au_writel(0x00, 0xb1900100); /* sys_pininputen */
-               break;
-       case 0x02000000: /* Au1100 */
-               au_writel(0x02, 0xb0000010); /* ac97_enable */
-               au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
-               asm("sync");
-               au_writel(0x00, 0xb017fffc); /* usbh_enable */
-               au_writel(0x00, 0xb0200058); /* usbd_enable */
-               au_writel(0x00, 0xb0300040); /* ir_enable */
-               au_writel(0x00, 0xb4004104); /* mac dma */
-               au_writel(0x00, 0xb4004114); /* mac dma */
-               au_writel(0x00, 0xb4004124); /* mac dma */
-               au_writel(0x00, 0xb4004134); /* mac dma */
-               au_writel(0x00, 0xb0520000); /* macen0 */
-               au_writel(0x00, 0xb1000008); /* i2s_enable  */
-               au_writel(0x00, 0xb1100100); /* uart0_enable */
-               au_writel(0x00, 0xb1200100); /* uart1_enable */
-               au_writel(0x00, 0xb1400100); /* uart3_enable */
-               au_writel(0x02, 0xb1600100); /* ssi0_enable */
-               au_writel(0x02, 0xb1680100); /* ssi1_enable */
-               au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-               au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-               au_writel(0x00, 0xb1900028); /* sys_clksrc */
-               au_writel(0x10, 0xb1900060); /* sys_cpupll */
-               au_writel(0x00, 0xb1900064); /* sys_auxpll */
-               au_writel(0x00, 0xb1900100); /* sys_pininputen */
-               break;
-       case 0x03000000: /* Au1550 */
-               au_writel(0x00, 0xb1a00004); /* psc 0 */
-               au_writel(0x00, 0xb1b00004); /* psc 1 */
-               au_writel(0x00, 0xb0a00004); /* psc 2 */
-               au_writel(0x00, 0xb0b00004); /* psc 3 */
-               au_writel(0x00, 0xb017fffc); /* usbh_enable */
-               au_writel(0x00, 0xb0200058); /* usbd_enable */
-               au_writel(0x00, 0xb4004104); /* mac dma */
-               au_writel(0x00, 0xb4004114); /* mac dma */
-               au_writel(0x00, 0xb4004124); /* mac dma */
-               au_writel(0x00, 0xb4004134); /* mac dma */
-               au_writel(0x00, 0xb1520000); /* macen0 */
-               au_writel(0x00, 0xb1520004); /* macen1 */
-               au_writel(0x00, 0xb1100100); /* uart0_enable */
-               au_writel(0x00, 0xb1200100); /* uart1_enable */
-               au_writel(0x00, 0xb1400100); /* uart3_enable */
-               au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */
-               au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */
-               au_writel(0x00, 0xb1900028); /* sys_clksrc */
-               au_writel(0x10, 0xb1900060); /* sys_cpupll */
-               au_writel(0x00, 0xb1900064); /* sys_auxpll */
-               au_writel(0x00, 0xb1900100); /* sys_pininputen */
-               break;
-       }
-
-       set_c0_status(ST0_BEV | ST0_ERL);
-       change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
-       flush_cache_all();
-       write_c0_wired(0);
-
-       /* Give board a chance to do a hardware reset */
-       board_reset();
-
-       /* Jump to the beggining in case board_reset() is empty */
-       __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
-}
-
-void au1000_halt(void)
-{
-#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
-       /* Power off system */
-       printk(KERN_NOTICE "\n** Powering off...\n");
-       au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
-       au_sync();
-       while (1); /* should not get here */
-#else
-       printk(KERN_NOTICE "\n** You can safely turn off the power\n");
-#ifdef CONFIG_MIPS_MIRAGE
-       gpio_direction_output(210, 1);
-#endif
-#ifdef CONFIG_PM
-       au_sleep();
-
-       /* Should not get here */
-       printk(KERN_ERR "Unable to put CPU in sleep mode\n");
-       while (1);
-#else
-       while (1)
-               __asm__(".set\tmips3\n\t"
-                       "wait\n\t"
-                       ".set\tmips0");
-#endif
-#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */
-}
-
-void au1000_power_off(void)
-{
-       au1000_halt();
-}
index 375984e5c2e6826139242bfa10463df81b3651fe..193ba166affd6f8147c3f80647d5fa7098723fdb 100644 (file)
 #include <linux/ioport.h>
 #include <linux/jiffies.h>
 #include <linux/module.h>
-#include <linux/pm.h>
 
 #include <asm/mipsregs.h>
-#include <asm/reboot.h>
 #include <asm/time.h>
 
 #include <au1000.h>
 
 extern void __init board_setup(void);
-extern void au1000_restart(char *);
-extern void au1000_halt(void);
-extern void au1000_power_off(void);
 extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
@@ -57,10 +52,6 @@ void __init plat_mem_setup(void)
        /* this is faster than wasting cycles trying to approximate it */
        preset_lpj = (est_freq >> 1) / HZ;
 
-       _machine_restart = au1000_restart;
-       _machine_halt = au1000_halt;
-       pm_power_off = au1000_power_off;
-
        board_setup();  /* board specific setup */
 
        if (au1xxx_cpu_needs_config_od())
index a3458c0e40510c84c189e5db66b1ae513caafff5..379536e3abd1f52d2543386a9d3c5e8cca6c602d 100644 (file)
@@ -9,30 +9,15 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/pm.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-db1x00/bcsr.h>
 #include <asm/mach-db1x00/db1200.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
 
 const char *get_system_type(void)
 {
        return "Alchemy Db1200";
 }
 
-static void board_power_off(void)
-{
-       bcsr_write(BCSR_RESETS, 0);
-       bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
-}
-
-void board_reset(void)
-{
-       bcsr_write(BCSR_RESETS, 0);
-       bcsr_write(BCSR_SYSTEM, 0);
-}
-
 void __init board_setup(void)
 {
        unsigned long freq0, clksrc, div, pfc;
@@ -73,10 +58,6 @@ void __init board_setup(void)
        clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT;
        __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC);
        wmb();
-
-       pm_power_off = board_power_off;
-       _machine_halt = board_power_off;
-       _machine_restart = (void(*)(char *))board_reset;
 }
 
 /* use the hexleds to count the number of times the cpu has entered
index b490efff4dcae1b27d7a979cb1fd057b5480d98c..56c541d0c55a760ab1d517c5febf82bc3a36b507 100644 (file)
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1xxx_eth.h>
 #include <asm/mach-db1x00/db1x00.h>
 #include <asm/mach-db1x00/bcsr.h>
+#include <asm/reboot.h>
 
 #include <prom.h>
 
@@ -43,6 +45,18 @@ char irq_tab_alchemy[][5] __initdata = {
        [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371   */
        [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */
 };
+
+static void bosporus_power_off(void)
+{
+       printk(KERN_INFO "It's now safe to turn off power\n");
+       while (1)
+               asm volatile (".set mips3 ; wait ; .set mips0");
+}
+
+const char *get_system_type(void)
+{
+       return "Alchemy Bosporus Gateway Reference";
+}
 #endif
 
 /*
@@ -73,6 +87,16 @@ char irq_tab_alchemy[][5] __initdata = {
        [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */
        [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */
 };
+
+static void mirage_power_off(void)
+{
+       alchemy_gpio_direction_output(210, 1);
+}
+
+const char *get_system_type(void)
+{
+       return "Alchemy Mirage";
+}
 #endif
 
 #ifdef CONFIG_MIPS_DB1550
@@ -83,19 +107,19 @@ char irq_tab_alchemy[][5] __initdata = {
 };
 #endif
 
-const char *get_system_type(void)
+#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
+static void mips_softreset(void)
 {
-#ifdef CONFIG_MIPS_BOSPORUS
-       return "Alchemy Bosporus Gateway Reference";
-#else
-       return "Alchemy Db1x00";
-#endif
+       asm volatile ("jr\t%0" : : "r"(0xbfc00000));
 }
 
-void board_reset(void)
+#else
+
+const char *get_system_type(void)
 {
-       bcsr_write(BCSR_SYSTEM, 0);
+       return "Alchemy Db1x00";
 }
+#endif
 
 void __init board_setup(void)
 {
@@ -196,8 +220,17 @@ void __init board_setup(void)
         * be part of the audio driver.
         */
        alchemy_gpio_direction_output(209, 1);
+
+       pm_power_off = mirage_power_off;
+       _machine_halt = mirage_power_off;
+       _machine_restart = (void(*)(char *))mips_softreset;
 #endif
 
+#ifdef CONFIG_MIPS_BOSPORUS
+       pm_power_off = bosporus_power_off;
+       _machine_halt = bosporus_power_off;
+       _machine_restart = (void(*)(char *))mips_softreset;
+#endif
        au_sync();
 }
 
index 7f2bcee7ac343904883d6012dcabfc8e6d307251..febf4e04234363894886d64e64cf1047517f6fbd 100644 (file)
@@ -8,6 +8,35 @@
 #include <linux/mtd/physmap.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+static void db1x_power_off(void)
+{
+       bcsr_write(BCSR_RESETS, 0);
+       bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET);
+}
+
+static void db1x_reset(char *c)
+{
+       bcsr_write(BCSR_RESETS, 0);
+       bcsr_write(BCSR_SYSTEM, 0);
+}
+
+static int __init db1x_poweroff_setup(void)
+{
+       if (!pm_power_off)
+               pm_power_off = db1x_power_off;
+       if (!_machine_halt)
+               _machine_halt = db1x_power_off;
+       if (!_machine_restart)
+               _machine_restart = db1x_reset;
+
+       return 0;
+}
+late_initcall(db1x_poweroff_setup);
 
 /* register a pcmcia socket */
 int __init db1x_register_pcmcia_socket(unsigned long pseudo_attr_start,
index 13577eec8b44a515ae8c20209ced5755528a5106..e2838c6185d33ab835c74ac3f802b1af426571c7 100644 (file)
@@ -31,7 +31,9 @@
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/pm.h>
 
+#include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
@@ -50,12 +52,19 @@ char irq_tab_alchemy[][5] __initdata = {
 extern int (*board_pci_idsel)(unsigned int devsel, int assert);
 int mtx1_pci_idsel(unsigned int devsel, int assert);
 
-void board_reset(void)
+static void mtx1_reset(char *c)
 {
        /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
        au_writel(0x00000000, 0xAE00001C);
 }
 
+static void mtx1_power_off(void)
+{
+       printk(KERN_ALERT "It's now safe to remove power\n");
+       while (1)
+               asm volatile (".set mips3 ; wait ; .set mips1");
+}
+
 void __init board_setup(void)
 {
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -98,6 +107,10 @@ void __init board_setup(void)
        alchemy_gpio_direction_output(211, 1);  /* green on */
        alchemy_gpio_direction_output(212, 0);  /* red off */
 
+       pm_power_off = mtx1_power_off;
+       _machine_halt = mtx1_power_off;
+       _machine_restart = mtx1_reset;
+
        printk(KERN_INFO "4G Systems MTX-1 Board\n");
 }
 
index 21bef8dc0883ae7a0228a5ee58a205e10e433334..7956afa78c4bf8ce8e36486d199ec46257f7f57e 100644 (file)
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
+#include <linux/pm.h>
 
+#include <asm/reboot.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #include <prom.h>
 
-void board_reset(void)
+static void xxs1500_reset(char *c)
 {
        /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
        au_writel(0x00000000, 0xAE00001C);
 }
 
+static void xxs1500_power_off(void)
+{
+       printk(KERN_ALERT "It's now safe to remove power\n");
+       while (1)
+               asm volatile (".set mips3 ; wait ; .set mips1");
+}
+
 void __init board_setup(void)
 {
        u32 pin_func;
@@ -52,6 +61,10 @@ void __init board_setup(void)
        }
 #endif
 
+       pm_power_off = xxs1500_power_off;
+       _machine_halt = xxs1500_power_off;
+       _machine_restart = xxs1500_reset;
+
        alchemy_gpio1_input_enable();
        alchemy_gpio2_enable();