select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_FUNCTION_TRACER
+ select HAVE_FUTEX_CMPXCHG if !MMU
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_OPROFILE
select HAVE_PERF_EVENTS
source "mm/Kconfig"
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
hex "Physical address of the default memory area start"
depends on PLATFORM_WANT_DEFAULT_MEM
default 0x00000000 if MMU
- default 0x40000000 if !MMU
+ default 0x60000000 if !MMU
help
This is a fallback start address of the default memory area, it is
used when no physical memory size is passed through DTB or through
*(.bss)
__bss_end = .;
}
-
-#ifdef CONFIG_MMU
- /*
- * This is a remapped copy of the Reset Vector Code.
- * It keeps gdb in sync with the PC after switching
- * to the temporary mapping used while setting up
- * the V2 MMU mappings for Linux.
- */
- .ResetVector.remapped_text 0x46000000 (INFO):
- {
- *(.ResetVector.remapped_text)
- }
-#endif
}
wsr a0, ps
rsync
- Offset = _SetupMMU - _ResetVector
-
#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
initialize_mmu
#endif
movi a3, 0
movi a4, 0
jx a0
-
-#ifdef CONFIG_MMU
- .align 4
-
- .section .ResetVector.remapped_text, "x"
- .global _RemappedResetVector
-
- /* Do org before literals */
- .org 0
-
-_RemappedResetVector:
- .begin no-absolute-literals
- .literal_position
-
- _j _RemappedSetupMMU
-
- /* Position Remapped code at the same location as the original code */
- . = _RemappedResetVector + Offset
-
-_RemappedSetupMMU:
-#ifndef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
- initialize_mmu
-#endif
-
- .end no-absolute-literals
-#endif
--- /dev/null
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-128m.dtsi"
+
+/ {
+ compatible = "cdns,xtensa-kc705";
+ chosen {
+ bootargs = "earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug";
+ };
+ memory@0 {
+ device_type = "memory";
+ reg = <0x60000000 0x10000000>;
+ };
+ soc {
+ ranges = <0x00000000 0x90000000 0x10000000>;
+ };
+};
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_XZ is not set
+# CONFIG_RD_LZO is not set
+# CONFIG_RD_LZ4 is not set
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="de212"
+# CONFIG_XTENSA_VARIANT_MMU is not set
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0x9d050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="kc705_nommu"
+CONFIG_DEFAULT_MEM_SIZE=0x10000000
+CONFIG_BINFMT_FLAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_FRAME_POINTER is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_VM=y
+CONFIG_DEBUG_NOMMU_REGIONS=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+# CONFIG_RCU_CPU_STALL_INFO is not set
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_LD_NO_RELAX is not set
+# CONFIG_CRYPTO_ECHAINIV is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
* __loop as
* restart loop. 'as' register must not have been modified!
*
- * __endla ar, at, incr
+ * __endla ar, as, incr
* ar start address (modified)
- * as scratch register used by macro
+ * as scratch register used by __loops/__loopi macros or
+ * end address used by __loopt macro
* inc increment
*/
.endm
/*
- * loop from ar to ax
+ * loop from ar to as
*/
.macro __loopt ar, as, at, incr_log2
.macro ___unlock_dcache_all ar at
+#if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___flush_invalidate_dcache_all ar at
+#if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___flush_dcache_all ar at
+#if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___invalidate_dcache_all ar at
+#if XCHAL_DCACHE_SIZE
__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___invalidate_icache_all ar at
+#if XCHAL_ICACHE_SIZE
__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
XCHAL_ICACHE_LINEWIDTH
+#endif
.endm
.macro ___flush_invalidate_dcache_range ar as at
+#if XCHAL_DCACHE_SIZE
__loop_cache_range \ar \as \at dhwbi XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___flush_dcache_range ar as at
+#if XCHAL_DCACHE_SIZE
__loop_cache_range \ar \as \at dhwb XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___invalidate_dcache_range ar as at
+#if XCHAL_DCACHE_SIZE
__loop_cache_range \ar \as \at dhi XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___invalidate_icache_range ar as at
+#if XCHAL_ICACHE_SIZE
__loop_cache_range \ar \as \at ihi XCHAL_ICACHE_LINEWIDTH
+#endif
.endm
.macro ___flush_invalidate_dcache_page ar as
+#if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___flush_dcache_page ar as
+#if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___invalidate_dcache_page ar as
+#if XCHAL_DCACHE_SIZE
__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH
+#endif
.endm
.macro ___invalidate_icache_page ar as
+#if XCHAL_ICACHE_SIZE
__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
+#endif
.endm
extern void __flush_invalidate_dcache_page(unsigned long);
extern void __flush_invalidate_dcache_range(unsigned long, unsigned long);
#else
-# define __flush_dcache_range(p,s) do { } while(0)
-# define __flush_dcache_page(p) do { } while(0)
-# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p)
+static inline void __flush_dcache_page(unsigned long va)
+{
+}
+static inline void __flush_dcache_range(unsigned long va, unsigned long sz)
+{
+}
+# define __flush_invalidate_dcache_all() __invalidate_dcache_all()
+# define __flush_invalidate_dcache_page(p) __invalidate_dcache_page(p)
# define __flush_invalidate_dcache_range(p,s) __invalidate_dcache_range(p,s)
#endif
#endif
-#define XTENSA_CACHEBLK_LOG2 29
-#define XTENSA_CACHEBLK_SIZE (1 << XTENSA_CACHEBLK_LOG2)
-#define XTENSA_CACHEBLK_MASK (7 << XTENSA_CACHEBLK_LOG2)
-
-#if XCHAL_HAVE_CACHEATTR
-static inline u32 xtensa_get_cacheattr(void)
-{
- u32 r;
- asm volatile(" rsr %0, cacheattr" : "=a"(r));
- return r;
-}
-
-static inline u32 xtensa_get_dtlb1(u32 addr)
-{
- u32 r = addr & XTENSA_CACHEBLK_MASK;
- return r | ((xtensa_get_cacheattr() >> (r >> (XTENSA_CACHEBLK_LOG2-2)))
- & 0xF);
-}
-#else
-static inline u32 xtensa_get_dtlb1(u32 addr)
-{
- u32 r;
- asm volatile(" rdtlb1 %0, %1" : "=a"(r) : "a"(addr));
- asm volatile(" dsync");
- return r;
-}
-
-static inline u32 xtensa_get_cacheattr(void)
-{
- u32 r = 0;
- u32 a = 0;
- do {
- a -= XTENSA_CACHEBLK_SIZE;
- r = (r << 4) | (xtensa_get_dtlb1(a) & 0xF);
- } while (a);
- return r;
-}
-#endif
-
-static inline int xtensa_need_flush_dma_source(u32 addr)
-{
- return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) >= 4;
-}
-
-static inline int xtensa_need_invalidate_dma_destination(u32 addr)
-{
- return (xtensa_get_dtlb1(addr) & ((1 << XCHAL_CA_BITS) - 1)) != 2;
-}
-
-static inline void flush_dcache_unaligned(u32 addr, u32 size)
-{
- u32 cnt;
- if (size) {
- cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
- + XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
- while (cnt--) {
- asm volatile(" dhwb %0, 0" : : "a"(addr));
- addr += XCHAL_DCACHE_LINESIZE;
- }
- asm volatile(" dsync");
- }
-}
-
-static inline void invalidate_dcache_unaligned(u32 addr, u32 size)
-{
- int cnt;
- if (size) {
- asm volatile(" dhwbi %0, 0 ;" : : "a"(addr));
- cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
- - XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
- while (cnt-- > 0) {
- asm volatile(" dhi %0, %1" : : "a"(addr),
- "n"(XCHAL_DCACHE_LINESIZE));
- addr += XCHAL_DCACHE_LINESIZE;
- }
- asm volatile(" dhwbi %0, %1" : : "a"(addr),
- "n"(XCHAL_DCACHE_LINESIZE));
- asm volatile(" dsync");
- }
-}
-
-static inline void flush_invalidate_dcache_unaligned(u32 addr, u32 size)
-{
- u32 cnt;
- if (size) {
- cnt = (size + ((XCHAL_DCACHE_LINESIZE - 1) & addr)
- + XCHAL_DCACHE_LINESIZE - 1) / XCHAL_DCACHE_LINESIZE;
- while (cnt--) {
- asm volatile(" dhwbi %0, 0" : : "a"(addr));
- addr += XCHAL_DCACHE_LINESIZE;
- }
- asm volatile(" dsync");
- }
-}
-
#endif /* _XTENSA_CACHEFLUSH_H */
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction);
+static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return (dma_addr_t)paddr;
+}
+
+static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return (phys_addr_t)daddr;
+}
+
#endif /* _XTENSA_DMA_MAPPING_H */
#endif /* defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU &&
XCHAL_HAVE_SPANNING_WAY */
-#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS
+#if !defined(CONFIG_MMU) && XCHAL_HAVE_TLBS && \
+ (XCHAL_DCACHE_SIZE || XCHAL_ICACHE_SIZE)
/* Enable data and instruction cache in the DEFAULT_MEMORY region
* if the processor has DTLB and ITLB.
*/
1:
sub a9, a9, a8
2:
+#if XCHAL_DCACHE_SIZE
rdtlb1 a3, a5
- ritlb1 a4, a5
and a3, a3, a6
- and a4, a4, a6
or a3, a3, a7
- or a4, a4, a7
wdtlb a3, a5
+#endif
+#if XCHAL_ICACHE_SIZE
+ ritlb1 a4, a5
+ and a4, a4, a6
+ or a4, a4, a7
witlb a4, a5
+#endif
add a5, a5, a8
bltu a8, a9, 1b
#ifdef CONFIG_MMU
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
-extern unsigned long xtensa_kio_paddr;
-
-static inline unsigned long xtensa_get_kio_paddr(void)
-{
- return xtensa_kio_paddr;
-}
-#endif
-
/*
* Return the virtual address for the specified bus memory.
* Note that we currently don't support any address outside the KIO segment.
* We only use two ring levels, user and kernel space.
*/
+#ifdef CONFIG_MMU
#define USER_RING 1 /* user ring level */
+#else
+#define USER_RING 0
+#endif
#define KERNEL_RING 0 /* kernel ring level */
/*
#include <variant/core.h>
#include <platform/hardware.h>
+#if XCHAL_HAVE_PTP_MMU
#define XCHAL_KIO_CACHED_VADDR 0xe0000000
#define XCHAL_KIO_BYPASS_VADDR 0xf0000000
#define XCHAL_KIO_DEFAULT_PADDR 0xf0000000
+#else
+#define XCHAL_KIO_BYPASS_VADDR XCHAL_KIO_PADDR
+#define XCHAL_KIO_DEFAULT_PADDR 0x90000000
+#endif
#define XCHAL_KIO_SIZE 0x10000000
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY && defined(CONFIG_OF)
+#if (!XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY) && defined(CONFIG_OF)
#define XCHAL_KIO_PADDR xtensa_get_kio_paddr()
+#ifndef __ASSEMBLY__
+extern unsigned long xtensa_kio_paddr;
+
+static inline unsigned long xtensa_get_kio_paddr(void)
+{
+ return xtensa_kio_paddr;
+}
+#endif
#else
#define XCHAL_KIO_PADDR XCHAL_KIO_DEFAULT_PADDR
#endif
#define LOAD_MEMORY_ADDRESS 0xD0003000
#endif
+#define RESET_VECTOR1_VADDR (VIRTUAL_MEMORY_ADDRESS + \
+ XCHAL_RESET_VECTOR1_PADDR)
+
#else /* !defined(CONFIG_MMU) */
/* MMU Not being used - Virtual == Physical */
/* Loaded just above possibly live vectors */
#define LOAD_MEMORY_ADDRESS (PLATFORM_DEFAULT_MEM_START + 0x3000)
+#define RESET_VECTOR1_VADDR (XCHAL_RESET_VECTOR1_VADDR)
+
#endif /* CONFIG_MMU */
#define XC_VADDR(offset) (VIRTUAL_MEMORY_ADDRESS + offset)
/* Used to set VECBASE register */
#define VECBASE_RESET_VADDR VIRTUAL_MEMORY_ADDRESS
-#define RESET_VECTOR_VECOFS (XCHAL_RESET_VECTOR_VADDR - \
- VECBASE_RESET_VADDR)
-#define RESET_VECTOR_VADDR XC_VADDR(RESET_VECTOR_VECOFS)
-
-#define RESET_VECTOR1_VECOFS (XCHAL_RESET_VECTOR1_VADDR - \
- VECBASE_RESET_VADDR)
-#define RESET_VECTOR1_VADDR XC_VADDR(RESET_VECTOR1_VECOFS)
-
#if defined(XCHAL_HAVE_VECBASE) && XCHAL_HAVE_VECBASE
#define USER_VECTOR_VADDR XC_VADDR(XCHAL_USER_VECOFS)
obj-$(CONFIG_XTENSA_VARIANT_HAVE_PERF_EVENTS) += perf_event.o
AFLAGS_head.o += -mtext-section-literals
+AFLAGS_mxhead.o += -mtext-section-literals
# In the Xtensa architecture, assembly generates literals which must always
# precede the L32R instruction with a relative offset less than 256 kB.
s32i a2, a1, PT_SYSCALL
movi a2, 0
s32i a3, a1, PT_EXCVADDR
+#if XCHAL_HAVE_LOOPS
xsr a2, lcount
s32i a2, a1, PT_LCOUNT
+#endif
/* It is now save to restore the EXC_TABLE_FIXUP variable. */
rsync # PS.WOE => rsync => overflow
/* Save lbeg, lend */
-
+#if XCHAL_HAVE_LOOPS
rsr a4, lbeg
rsr a3, lend
s32i a4, a1, PT_LBEG
s32i a3, a1, PT_LEND
+#endif
/* Save SCOMPARE1 */
wsr a3, sar
/* Restore LBEG, LEND, LCOUNT */
-
+#if XCHAL_HAVE_LOOPS
l32i a2, a1, PT_LBEG
l32i a3, a1, PT_LEND
wsr a2, lbeg
l32i a2, a1, PT_LCOUNT
wsr a3, lend
wsr a2, lcount
+#endif
/* We control single stepping through the ICOUNTLEVEL register. */
__loopt a2, a3, a4, 2
s32i a0, a2, 0
- __endla a2, a4, 4
+ __endla a2, a3, 4
#if XCHAL_DCACHE_IS_WRITEBACK
rsync
_SetupMMU:
- Offset = _SetupMMU - _SecondaryResetVector
-
#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
initialize_mmu
#endif
jx a3
.end no-absolute-literals
-
-
- .section .SecondaryResetVector.remapped_text, "ax"
- .global _RemappedSecondaryResetVector
-
- .org 0 # Need to do org before literals
-
-_RemappedSecondaryResetVector:
- .begin no-absolute-literals
- .literal_position
-
- _j _RemappedSetupMMU
- . = _RemappedSecondaryResetVector + Offset
-
-_RemappedSetupMMU:
-
-#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
- initialize_mmu
-#endif
-
- .end no-absolute-literals
* Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
*/
-#include <linux/types.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/pci.h>
#include <linux/gfp.h>
+#include <linux/highmem.h>
+#include <linux/mm.h>
#include <linux/module.h>
-#include <asm/io.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/types.h>
#include <asm/cacheflush.h>
+#include <asm/io.h>
void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction dir)
}
EXPORT_SYMBOL(dma_cache_sync);
+static void do_cache_op(dma_addr_t dma_handle, size_t size,
+ void (*fn)(unsigned long, unsigned long))
+{
+ unsigned long off = dma_handle & (PAGE_SIZE - 1);
+ unsigned long pfn = PFN_DOWN(dma_handle);
+ struct page *page = pfn_to_page(pfn);
+
+ if (!PageHighMem(page))
+ fn((unsigned long)bus_to_virt(dma_handle), size);
+ else
+ while (size > 0) {
+ size_t sz = min_t(size_t, size, PAGE_SIZE - off);
+ void *vaddr = kmap_atomic(page);
+
+ fn((unsigned long)vaddr + off, sz);
+ kunmap_atomic(vaddr);
+ off = 0;
+ ++page;
+ size -= sz;
+ }
+}
+
static void xtensa_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir)
{
- void *vaddr;
-
switch (dir) {
case DMA_BIDIRECTIONAL:
case DMA_FROM_DEVICE:
- vaddr = bus_to_virt(dma_handle);
- __invalidate_dcache_range((unsigned long)vaddr, size);
+ do_cache_op(dma_handle, size, __invalidate_dcache_range);
break;
case DMA_NONE:
dma_addr_t dma_handle, size_t size,
enum dma_data_direction dir)
{
- void *vaddr;
-
switch (dir) {
case DMA_BIDIRECTIONAL:
case DMA_TO_DEVICE:
- vaddr = bus_to_virt(dma_handle);
- __flush_dcache_range((unsigned long)vaddr, size);
+ if (XCHAL_DCACHE_IS_WRITEBACK)
+ do_cache_op(dma_handle, size, __flush_dcache_range);
break;
case DMA_NONE:
{
dma_addr_t dma_handle = page_to_phys(page) + offset;
- BUG_ON(PageHighMem(page));
xtensa_sync_single_for_device(dev, dma_handle, size, dir);
return dma_handle;
}
#ifdef CONFIG_OF
bool __initdata dt_memory_scan = false;
-#if XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY
+#if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
EXPORT_SYMBOL(xtensa_kio_paddr);
extern char _Level6InterruptVector_text_start;
extern char _Level6InterruptVector_text_end;
#endif
-
+#ifdef CONFIG_SMP
+extern char _SecondaryResetVector_text_start;
+extern char _SecondaryResetVector_text_end;
+#endif
#ifdef CONFIG_S32C1I_SELFTEST
__pa(&_Level6InterruptVector_text_end), 0);
#endif
+#ifdef CONFIG_SMP
+ mem_reserve(__pa(&_SecondaryResetVector_text_start),
+ __pa(&_SecondaryResetVector_text_end), 0);
+#endif
parse_early_param();
bootmem_init();
ENDPROC(_DoubleExceptionVector)
+ .end literal_prefix
+
+ .text
/*
* Fixup handler for TLB miss in double exception handler for window owerflow.
* We get here with windowbase set to the window that was being spilled and
ENDPROC(window_overflow_restore_a0_fixup)
- .end literal_prefix
/*
* Debug interrupt vector
*
RELOCATE_ENTRY(_DebugInterruptVector_text,
.DebugInterruptVector.text);
#if defined(CONFIG_SMP)
- RELOCATE_ENTRY(_SecondaryResetVector_literal,
- .SecondaryResetVector.literal);
RELOCATE_ENTRY(_SecondaryResetVector_text,
.SecondaryResetVector.text);
#endif
#if defined(CONFIG_SMP)
- SECTION_VECTOR (_SecondaryResetVector_literal,
- .SecondaryResetVector.literal,
- RESET_VECTOR1_VADDR - 4,
- SIZEOF(.DoubleExceptionVector.text),
- .DoubleExceptionVector.text)
-
SECTION_VECTOR (_SecondaryResetVector_text,
.SecondaryResetVector.text,
RESET_VECTOR1_VADDR,
- 4,
- .SecondaryResetVector.literal)
+ SIZEOF(.DoubleExceptionVector.text),
+ .DoubleExceptionVector.text)
. = LOADADDR(.SecondaryResetVector.text)+SIZEOF(.SecondaryResetVector.text);
_end = .;
- /* only used by the boot loader */
-
- . = ALIGN(0x10);
- .bootstrap : { *(.bootstrap.literal .bootstrap.text .bootstrap.data) }
-
- .ResetVector.text RESET_VECTOR_VADDR :
- {
- *(.ResetVector.text)
- }
-
-
- /*
- * This is a remapped copy of the Secondary Reset Vector Code.
- * It keeps gdb in sync with the PC after switching
- * to the temporary mapping used while setting up
- * the V2 MMU mappings for Linux.
- *
- * Only debug information about this section is put in the kernel image.
- */
- .SecondaryResetVector.remapped_text 0x46000000 (INFO):
- {
- *(.SecondaryResetVector.remapped_text)
- }
-
-
.xt.lit : { *(.xt.lit) }
.xt.prop : { *(.xt.prop) }
loopnez a7, .Loop2done
#else /* !XCHAL_HAVE_LOOPS */
beqz a7, .Loop2done
- slli a10, a7, 4
- add a10, a10, a3 # a10 = end of last 16B source chunk
+ slli a12, a7, 4
+ add a12, a12, a3 # a12 = end of last 16B source chunk
#endif /* !XCHAL_HAVE_LOOPS */
.Loop2:
EX(l32i, a7, a3, 4, l_fixup)
EX(s32i, a9, a5, 12, s_fixup)
addi a5, a5, 16
#if !XCHAL_HAVE_LOOPS
- blt a3, a10, .Loop2
+ blt a3, a12, .Loop2
#endif /* !XCHAL_HAVE_LOOPS */
.Loop2done:
bbci.l a4, 3, .L12
#if XCHAL_NUM_IBREAK > 0
"wsr a2, ibreakenable\n\t"
#endif
+#if XCHAL_HAVE_LOOPS
"wsr a2, lcount\n\t"
+#endif
"movi a2, 0x1f\n\t"
"wsr a2, ps\n\t"
"isync\n\t"
#if XCHAL_NUM_IBREAK > 0
"wsr a2, ibreakenable\n\t"
#endif
+#if XCHAL_HAVE_LOOPS
"wsr a2, lcount\n\t"
+#endif
"movi a2, 0x1f\n\t"
"wsr a2, ps\n\t"
"isync\n\t"
* This file contains the hardware configuration of the XTAVNET boards.
*/
+#include <asm/types.h>
+
#ifndef __XTENSA_XTAVNET_HARDWARE_H
#define __XTENSA_XTAVNET_HARDWARE_H
/* Memory configuration. */
-#define PLATFORM_DEFAULT_MEM_START CONFIG_DEFAULT_MEM_START
-#define PLATFORM_DEFAULT_MEM_SIZE CONFIG_DEFAULT_MEM_SIZE
+#define PLATFORM_DEFAULT_MEM_START __XTENSA_UL(CONFIG_DEFAULT_MEM_START)
+#define PLATFORM_DEFAULT_MEM_SIZE __XTENSA_UL(CONFIG_DEFAULT_MEM_SIZE)
/* Interrupt configuration. */
#if XCHAL_NUM_IBREAK > 0
"wsr a2, ibreakenable\n\t"
#endif
+#if XCHAL_HAVE_LOOPS
"wsr a2, lcount\n\t"
+#endif
"movi a2, 0x1f\n\t"
"wsr a2, ps\n\t"
"isync\n\t"
--- /dev/null
+/*
+ * xtensa/config/core-isa.h -- HAL definitions that are dependent on Xtensa
+ * processor CORE configuration
+ *
+ * See <xtensa/config/core.h>, which includes this file, for more details.
+ */
+
+/* Xtensa processor core configuration information.
+
+ Copyright (c) 1999-2015 Tensilica Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_CONFIGURATION_H
+#define _XTENSA_CORE_CONFIGURATION_H
+
+
+/****************************************************************************
+ Parameters Useful for Any Code, USER or PRIVILEGED
+ ****************************************************************************/
+
+/*
+ * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is
+ * configured, and a value of 0 otherwise. These macros are always defined.
+ */
+
+
+/*----------------------------------------------------------------------
+ ISA
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */
+#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */
+#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */
+#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */
+#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */
+#define XCHAL_HAVE_DEBUG 1 /* debug option */
+#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */
+#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */
+#define XCHAL_LOOP_BUFFER_SIZE 0 /* zero-ov. loop instr buffer size */
+#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */
+#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */
+#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */
+#define XCHAL_HAVE_DEPBITS 0 /* DEPBITS instruction */
+#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */
+#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */
+#define XCHAL_HAVE_MUL32 1 /* MULL instruction */
+#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */
+#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */
+#define XCHAL_HAVE_L32R 1 /* L32R instruction */
+#define XCHAL_HAVE_ABSOLUTE_LITERALS 0 /* non-PC-rel (extended) L32R */
+#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */
+#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */
+#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */
+#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */
+#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */
+#define XCHAL_HAVE_ABS 1 /* ABS instruction */
+/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */
+/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */
+#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */
+#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */
+#define XCHAL_HAVE_SPECULATION 0 /* speculation */
+#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */
+#define XCHAL_NUM_CONTEXTS 1 /* */
+#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */
+#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */
+#define XCHAL_HAVE_PRID 1 /* processor ID register */
+#define XCHAL_HAVE_EXTERN_REGS 1 /* WER/RER instructions */
+#define XCHAL_HAVE_MX 0 /* MX core (Tensilica internal) */
+#define XCHAL_HAVE_MP_INTERRUPTS 0 /* interrupt distributor port */
+#define XCHAL_HAVE_MP_RUNSTALL 0 /* core RunStall control port */
+#define XCHAL_HAVE_PSO 0 /* Power Shut-Off */
+#define XCHAL_HAVE_PSO_CDM 0 /* core/debug/mem pwr domains */
+#define XCHAL_HAVE_PSO_FULL_RETENTION 0 /* all regs preserved on PSO */
+#define XCHAL_HAVE_THREADPTR 0 /* THREADPTR register */
+#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */
+#define XCHAL_HAVE_CP 0 /* CPENABLE reg (coprocessor) */
+#define XCHAL_CP_MAXCFG 0 /* max allowed cp id plus one */
+#define XCHAL_HAVE_MAC16 1 /* MAC16 package */
+
+#define XCHAL_HAVE_FUSION 0 /* Fusion*/
+#define XCHAL_HAVE_FUSION_FP 0 /* Fusion FP option */
+#define XCHAL_HAVE_FUSION_LOW_POWER 0 /* Fusion Low Power option */
+#define XCHAL_HAVE_FUSION_AES 0 /* Fusion BLE/Wifi AES-128 CCM option */
+#define XCHAL_HAVE_FUSION_CONVENC 0 /* Fusion Conv Encode option */
+#define XCHAL_HAVE_FUSION_LFSR_CRC 0 /* Fusion LFSR-CRC option */
+#define XCHAL_HAVE_FUSION_BITOPS 0 /* Fusion Bit Operations Support option */
+#define XCHAL_HAVE_FUSION_AVS 0 /* Fusion AVS option */
+#define XCHAL_HAVE_FUSION_16BIT_BASEBAND 0 /* Fusion 16-bit Baseband option */
+#define XCHAL_HAVE_HIFIPRO 0 /* HiFiPro Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4 0 /* HiFi4 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI4_VFPU 0 /* HiFi4 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI3 0 /* HiFi3 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI3_VFPU 0 /* HiFi3 Audio Engine VFPU option */
+#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */
+#define XCHAL_HAVE_HIFI2EP 0 /* HiFi2EP */
+#define XCHAL_HAVE_HIFI_MINI 0
+
+
+#define XCHAL_HAVE_VECTORFPU2005 0 /* vector or user floating-point pkg */
+#define XCHAL_HAVE_USER_DPFPU 0 /* user DP floating-point pkg */
+#define XCHAL_HAVE_USER_SPFPU 0 /* user DP floating-point pkg */
+#define XCHAL_HAVE_FP 0 /* single prec floating point */
+#define XCHAL_HAVE_FP_DIV 0 /* FP with DIV instructions */
+#define XCHAL_HAVE_FP_RECIP 0 /* FP with RECIP instructions */
+#define XCHAL_HAVE_FP_SQRT 0 /* FP with SQRT instructions */
+#define XCHAL_HAVE_FP_RSQRT 0 /* FP with RSQRT instructions */
+#define XCHAL_HAVE_DFP 0 /* double precision FP pkg */
+#define XCHAL_HAVE_DFP_DIV 0 /* DFP with DIV instructions */
+#define XCHAL_HAVE_DFP_RECIP 0 /* DFP with RECIP instructions*/
+#define XCHAL_HAVE_DFP_SQRT 0 /* DFP with SQRT instructions */
+#define XCHAL_HAVE_DFP_RSQRT 0 /* DFP with RSQRT instructions*/
+#define XCHAL_HAVE_DFP_ACCEL 0 /* double precision FP acceleration pkg */
+#define XCHAL_HAVE_DFP_accel XCHAL_HAVE_DFP_ACCEL /* for backward compatibility */
+
+#define XCHAL_HAVE_DFPU_SINGLE_ONLY 0 /* DFPU Coprocessor, single precision only */
+#define XCHAL_HAVE_DFPU_SINGLE_DOUBLE 0 /* DFPU Coprocessor, single and double precision */
+#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */
+#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */
+#define XCHAL_HAVE_PDX4 0 /* PDX4 */
+#define XCHAL_HAVE_CONNXD2 0 /* ConnX D2 pkg */
+#define XCHAL_HAVE_CONNXD2_DUALLSFLIX 0 /* ConnX D2 & Dual LoadStore Flix */
+#define XCHAL_HAVE_BBE16 0 /* ConnX BBE16 pkg */
+#define XCHAL_HAVE_BBE16_RSQRT 0 /* BBE16 & vector recip sqrt */
+#define XCHAL_HAVE_BBE16_VECDIV 0 /* BBE16 & vector divide */
+#define XCHAL_HAVE_BBE16_DESPREAD 0 /* BBE16 & despread */
+#define XCHAL_HAVE_BBENEP 0 /* ConnX BBENEP pkgs */
+#define XCHAL_HAVE_BSP3 0 /* ConnX BSP3 pkg */
+#define XCHAL_HAVE_BSP3_TRANSPOSE 0 /* BSP3 & transpose32x32 */
+#define XCHAL_HAVE_SSP16 0 /* ConnX SSP16 pkg */
+#define XCHAL_HAVE_SSP16_VITERBI 0 /* SSP16 & viterbi */
+#define XCHAL_HAVE_TURBO16 0 /* ConnX Turbo16 pkg */
+#define XCHAL_HAVE_BBP16 0 /* ConnX BBP16 pkg */
+#define XCHAL_HAVE_FLIX3 0 /* basic 3-way FLIX option */
+#define XCHAL_HAVE_GRIVPEP 0 /* GRIVPEP is General Release of IVPEP */
+#define XCHAL_HAVE_GRIVPEP_HISTOGRAM 0 /* Histogram option on GRIVPEP */
+
+
+/*----------------------------------------------------------------------
+ MISC
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_LOADSTORE_UNITS 1 /* load/store units */
+#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */
+#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */
+#define XCHAL_DATA_WIDTH 4 /* data width in bytes */
+#define XCHAL_DATA_PIPE_DELAY 1 /* d-side pipeline delay
+ (1 = 5-stage, 2 = 7-stage) */
+#define XCHAL_CLOCK_GATING_GLOBAL 0 /* global clock gating */
+#define XCHAL_CLOCK_GATING_FUNCUNIT 0 /* funct. unit clock gating */
+/* In T1050, applies to selected core load and store instructions (see ISA): */
+#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */
+#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/
+#define XCHAL_UNALIGNED_LOAD_HW 0 /* unaligned loads work in hw */
+#define XCHAL_UNALIGNED_STORE_HW 0 /* unaligned stores work in hw*/
+
+#define XCHAL_SW_VERSION 1100002 /* sw version of this header */
+
+#define XCHAL_CORE_ID "de212" /* alphanum core name
+ (CoreID) set in the Xtensa
+ Processor Generator */
+
+#define XCHAL_BUILD_UNIQUE_ID 0x0005A985 /* 22-bit sw build ID */
+
+/*
+ * These definitions describe the hardware targeted by this software.
+ */
+#define XCHAL_HW_CONFIGID0 0xC283DFFE /* ConfigID hi 32 bits*/
+#define XCHAL_HW_CONFIGID1 0x1C85A985 /* ConfigID lo 32 bits*/
+#define XCHAL_HW_VERSION_NAME "LX6.0.2" /* full version name */
+#define XCHAL_HW_VERSION_MAJOR 2600 /* major ver# of targeted hw */
+#define XCHAL_HW_VERSION_MINOR 2 /* minor ver# of targeted hw */
+#define XCHAL_HW_VERSION 260002 /* major*100+minor */
+#define XCHAL_HW_REL_LX6 1
+#define XCHAL_HW_REL_LX6_0 1
+#define XCHAL_HW_REL_LX6_0_2 1
+#define XCHAL_HW_CONFIGID_RELIABLE 1
+/* If software targets a *range* of hardware versions, these are the bounds: */
+#define XCHAL_HW_MIN_VERSION_MAJOR 2600 /* major v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION_MINOR 2 /* minor v of earliest tgt hw */
+#define XCHAL_HW_MIN_VERSION 260002 /* earliest targeted hw */
+#define XCHAL_HW_MAX_VERSION_MAJOR 2600 /* major v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION_MINOR 2 /* minor v of latest tgt hw */
+#define XCHAL_HW_MAX_VERSION 260002 /* latest targeted hw */
+
+
+/*----------------------------------------------------------------------
+ CACHE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */
+#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */
+#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */
+#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */
+
+#define XCHAL_ICACHE_SIZE 8192 /* I-cache size in bytes or 0 */
+#define XCHAL_DCACHE_SIZE 8192 /* D-cache size in bytes or 0 */
+
+#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */
+#define XCHAL_DCACHE_IS_COHERENT 0 /* MP coherence feature */
+
+#define XCHAL_HAVE_PREFETCH 0 /* PREFCTL register */
+#define XCHAL_HAVE_PREFETCH_L1 0 /* prefetch to L1 dcache */
+#define XCHAL_PREFETCH_CASTOUT_LINES 0 /* dcache pref. castout bufsz */
+#define XCHAL_PREFETCH_ENTRIES 0 /* cache prefetch entries */
+#define XCHAL_PREFETCH_BLOCK_ENTRIES 0 /* prefetch block streams */
+#define XCHAL_HAVE_CACHE_BLOCKOPS 0 /* block prefetch for caches */
+#define XCHAL_HAVE_ICACHE_TEST 1 /* Icache test instructions */
+#define XCHAL_HAVE_DCACHE_TEST 1 /* Dcache test instructions */
+#define XCHAL_HAVE_ICACHE_DYN_WAYS 0 /* Icache dynamic way support */
+#define XCHAL_HAVE_DCACHE_DYN_WAYS 0 /* Dcache dynamic way support */
+
+
+
+
+/****************************************************************************
+ Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code
+ ****************************************************************************/
+
+
+#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY
+
+/*----------------------------------------------------------------------
+ CACHE
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */
+
+/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */
+
+/* Number of cache sets in log2(lines per way): */
+#define XCHAL_ICACHE_SETWIDTH 7
+#define XCHAL_DCACHE_SETWIDTH 7
+
+/* Cache set associativity (number of ways): */
+#define XCHAL_ICACHE_WAYS 2
+#define XCHAL_DCACHE_WAYS 2
+
+/* Cache features: */
+#define XCHAL_ICACHE_LINE_LOCKABLE 1
+#define XCHAL_DCACHE_LINE_LOCKABLE 1
+#define XCHAL_ICACHE_ECC_PARITY 0
+#define XCHAL_DCACHE_ECC_PARITY 0
+
+/* Cache access size in bytes (affects operation of SICW instruction): */
+#define XCHAL_ICACHE_ACCESS_SIZE 4
+#define XCHAL_DCACHE_ACCESS_SIZE 4
+
+#define XCHAL_DCACHE_BANKS 1 /* number of banks */
+
+/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */
+#define XCHAL_CA_BITS 4
+
+/* Whether MEMCTL register has anything useful */
+#define XCHAL_USE_MEMCTL (((XCHAL_LOOP_BUFFER_SIZE > 0) || \
+ XCHAL_DCACHE_IS_COHERENT || \
+ XCHAL_HAVE_ICACHE_DYN_WAYS || \
+ XCHAL_HAVE_DCACHE_DYN_WAYS) && \
+ (XCHAL_HW_MIN_VERSION >= XTENSA_HWVERSION_RE_2012_0))
+
+
+/*----------------------------------------------------------------------
+ INTERNAL I/D RAM/ROMs and XLMI
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */
+#define XCHAL_NUM_INSTRAM 1 /* number of core instr. RAMs */
+#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */
+#define XCHAL_NUM_DATARAM 1 /* number of core data RAMs */
+#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/
+#define XCHAL_NUM_XLMI 1 /* number of core XLMI ports */
+
+/* Instruction RAM 0: */
+#define XCHAL_INSTRAM0_VADDR 0x40000000 /* virtual address */
+#define XCHAL_INSTRAM0_PADDR 0x40000000 /* physical address */
+#define XCHAL_INSTRAM0_SIZE 131072 /* size in bytes */
+#define XCHAL_INSTRAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */
+
+/* Data RAM 0: */
+#define XCHAL_DATARAM0_VADDR 0x3FFE0000 /* virtual address */
+#define XCHAL_DATARAM0_PADDR 0x3FFE0000 /* physical address */
+#define XCHAL_DATARAM0_SIZE 131072 /* size in bytes */
+#define XCHAL_DATARAM0_ECC_PARITY 0 /* ECC/parity type, 0=none */
+#define XCHAL_DATARAM0_BANKS 1 /* number of banks */
+
+/* XLMI Port 0: */
+#define XCHAL_XLMI0_VADDR 0x3FFC0000 /* virtual address */
+#define XCHAL_XLMI0_PADDR 0x3FFC0000 /* physical address */
+#define XCHAL_XLMI0_SIZE 131072 /* size in bytes */
+#define XCHAL_XLMI0_ECC_PARITY 0 /* ECC/parity type, 0=none */
+
+#define XCHAL_HAVE_IMEM_LOADSTORE 1 /* can load/store to IROM/IRAM*/
+
+
+/*----------------------------------------------------------------------
+ INTERRUPTS and TIMERS
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */
+#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */
+#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */
+#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */
+#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */
+#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */
+#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */
+#define XCHAL_NUM_EXTINTERRUPTS 17 /* num of external interrupts */
+#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels
+ (not including level zero) */
+#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */
+ /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */
+
+/* Masks of interrupts at each interrupt level: */
+#define XCHAL_INTLEVEL1_MASK 0x001F80FF
+#define XCHAL_INTLEVEL2_MASK 0x00000100
+#define XCHAL_INTLEVEL3_MASK 0x00200E00
+#define XCHAL_INTLEVEL4_MASK 0x00001000
+#define XCHAL_INTLEVEL5_MASK 0x00002000
+#define XCHAL_INTLEVEL6_MASK 0x00000000
+#define XCHAL_INTLEVEL7_MASK 0x00004000
+
+/* Masks of interrupts at each range 1..n of interrupt levels: */
+#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F80FF
+#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F81FF
+#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F8FFF
+#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F9FFF
+#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF
+#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF
+#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF
+
+/* Level of each interrupt: */
+#define XCHAL_INT0_LEVEL 1
+#define XCHAL_INT1_LEVEL 1
+#define XCHAL_INT2_LEVEL 1
+#define XCHAL_INT3_LEVEL 1
+#define XCHAL_INT4_LEVEL 1
+#define XCHAL_INT5_LEVEL 1
+#define XCHAL_INT6_LEVEL 1
+#define XCHAL_INT7_LEVEL 1
+#define XCHAL_INT8_LEVEL 2
+#define XCHAL_INT9_LEVEL 3
+#define XCHAL_INT10_LEVEL 3
+#define XCHAL_INT11_LEVEL 3
+#define XCHAL_INT12_LEVEL 4
+#define XCHAL_INT13_LEVEL 5
+#define XCHAL_INT14_LEVEL 7
+#define XCHAL_INT15_LEVEL 1
+#define XCHAL_INT16_LEVEL 1
+#define XCHAL_INT17_LEVEL 1
+#define XCHAL_INT18_LEVEL 1
+#define XCHAL_INT19_LEVEL 1
+#define XCHAL_INT20_LEVEL 1
+#define XCHAL_INT21_LEVEL 3
+#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */
+#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */
+#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with
+ EXCSAVE/EPS/EPC_n, RFI n) */
+
+/* Type of each interrupt: */
+#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE
+#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL
+#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER
+#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI
+#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE
+
+/* Masks of interrupts for each type of interrupt: */
+#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000
+#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880
+#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F8000
+#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F
+#define XCHAL_INTTYPE_MASK_TIMER 0x00002440
+#define XCHAL_INTTYPE_MASK_NMI 0x00004000
+#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000
+#define XCHAL_INTTYPE_MASK_PROFILING 0x00000000
+
+/* Interrupt numbers assigned to specific interrupt sources: */
+#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */
+#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */
+#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */
+#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED
+#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */
+
+/* Interrupt numbers for levels at which only one interrupt is configured: */
+#define XCHAL_INTLEVEL2_NUM 8
+#define XCHAL_INTLEVEL4_NUM 12
+#define XCHAL_INTLEVEL5_NUM 13
+#define XCHAL_INTLEVEL7_NUM 14
+/* (There are many interrupts each at level(s) 1, 3.) */
+
+
+/*
+ * External interrupt mapping.
+ * These macros describe how Xtensa processor interrupt numbers
+ * (as numbered internally, eg. in INTERRUPT and INTENABLE registers)
+ * map to external BInterrupt<n> pins, for those interrupts
+ * configured as external (level-triggered, edge-triggered, or NMI).
+ * See the Xtensa processor databook for more details.
+ */
+
+/* Core interrupt numbers mapped to each EXTERNAL BInterrupt pin number: */
+#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */
+#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */
+#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */
+#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */
+#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */
+#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */
+#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */
+#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */
+#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */
+#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */
+#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */
+#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */
+#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */
+#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */
+#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */
+#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */
+#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */
+/* EXTERNAL BInterrupt pin numbers mapped to each core interrupt number: */
+#define XCHAL_INT0_EXTNUM 0 /* (intlevel 1) */
+#define XCHAL_INT1_EXTNUM 1 /* (intlevel 1) */
+#define XCHAL_INT2_EXTNUM 2 /* (intlevel 1) */
+#define XCHAL_INT3_EXTNUM 3 /* (intlevel 1) */
+#define XCHAL_INT4_EXTNUM 4 /* (intlevel 1) */
+#define XCHAL_INT5_EXTNUM 5 /* (intlevel 1) */
+#define XCHAL_INT8_EXTNUM 6 /* (intlevel 2) */
+#define XCHAL_INT9_EXTNUM 7 /* (intlevel 3) */
+#define XCHAL_INT12_EXTNUM 8 /* (intlevel 4) */
+#define XCHAL_INT14_EXTNUM 9 /* (intlevel 7) */
+#define XCHAL_INT15_EXTNUM 10 /* (intlevel 1) */
+#define XCHAL_INT16_EXTNUM 11 /* (intlevel 1) */
+#define XCHAL_INT17_EXTNUM 12 /* (intlevel 1) */
+#define XCHAL_INT18_EXTNUM 13 /* (intlevel 1) */
+#define XCHAL_INT19_EXTNUM 14 /* (intlevel 1) */
+#define XCHAL_INT20_EXTNUM 15 /* (intlevel 1) */
+#define XCHAL_INT21_EXTNUM 16 /* (intlevel 3) */
+
+
+/*----------------------------------------------------------------------
+ EXCEPTIONS and VECTORS
+ ----------------------------------------------------------------------*/
+
+#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture
+ number: 1 == XEA1 (old)
+ 2 == XEA2 (new)
+ 0 == XEAX (extern) or TX */
+#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */
+#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */
+#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */
+#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */
+#define XCHAL_HAVE_HALT 0 /* halt architecture option */
+#define XCHAL_HAVE_BOOTLOADER 0 /* boot loader (for TX) */
+#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */
+#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */
+#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */
+#define XCHAL_VECBASE_RESET_VADDR 0x60000000 /* VECBASE reset value */
+#define XCHAL_VECBASE_RESET_PADDR 0x60000000
+#define XCHAL_RESET_VECBASE_OVERLAP 0
+
+#define XCHAL_RESET_VECTOR0_VADDR 0x50000000
+#define XCHAL_RESET_VECTOR0_PADDR 0x50000000
+#define XCHAL_RESET_VECTOR1_VADDR 0x40000400
+#define XCHAL_RESET_VECTOR1_PADDR 0x40000400
+#define XCHAL_RESET_VECTOR_VADDR 0x50000000
+#define XCHAL_RESET_VECTOR_PADDR 0x50000000
+#define XCHAL_USER_VECOFS 0x00000340
+#define XCHAL_USER_VECTOR_VADDR 0x60000340
+#define XCHAL_USER_VECTOR_PADDR 0x60000340
+#define XCHAL_KERNEL_VECOFS 0x00000300
+#define XCHAL_KERNEL_VECTOR_VADDR 0x60000300
+#define XCHAL_KERNEL_VECTOR_PADDR 0x60000300
+#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0
+#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0x600003C0
+#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x600003C0
+#define XCHAL_WINDOW_OF4_VECOFS 0x00000000
+#define XCHAL_WINDOW_UF4_VECOFS 0x00000040
+#define XCHAL_WINDOW_OF8_VECOFS 0x00000080
+#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0
+#define XCHAL_WINDOW_OF12_VECOFS 0x00000100
+#define XCHAL_WINDOW_UF12_VECOFS 0x00000140
+#define XCHAL_WINDOW_VECTORS_VADDR 0x60000000
+#define XCHAL_WINDOW_VECTORS_PADDR 0x60000000
+#define XCHAL_INTLEVEL2_VECOFS 0x00000180
+#define XCHAL_INTLEVEL2_VECTOR_VADDR 0x60000180
+#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x60000180
+#define XCHAL_INTLEVEL3_VECOFS 0x000001C0
+#define XCHAL_INTLEVEL3_VECTOR_VADDR 0x600001C0
+#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x600001C0
+#define XCHAL_INTLEVEL4_VECOFS 0x00000200
+#define XCHAL_INTLEVEL4_VECTOR_VADDR 0x60000200
+#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x60000200
+#define XCHAL_INTLEVEL5_VECOFS 0x00000240
+#define XCHAL_INTLEVEL5_VECTOR_VADDR 0x60000240
+#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x60000240
+#define XCHAL_INTLEVEL6_VECOFS 0x00000280
+#define XCHAL_INTLEVEL6_VECTOR_VADDR 0x60000280
+#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x60000280
+#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS
+#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR
+#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR
+#define XCHAL_NMI_VECOFS 0x000002C0
+#define XCHAL_NMI_VECTOR_VADDR 0x600002C0
+#define XCHAL_NMI_VECTOR_PADDR 0x600002C0
+#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS
+#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR
+#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR
+
+
+/*----------------------------------------------------------------------
+ DEBUG MODULE
+ ----------------------------------------------------------------------*/
+
+/* Misc */
+#define XCHAL_HAVE_DEBUG_ERI 1 /* ERI to debug module */
+#define XCHAL_HAVE_DEBUG_APB 0 /* APB to debug module */
+#define XCHAL_HAVE_DEBUG_JTAG 1 /* JTAG to debug module */
+
+/* On-Chip Debug (OCD) */
+#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */
+#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */
+#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */
+#define XCHAL_HAVE_OCD_DIR_ARRAY 0 /* faster OCD option (to LX4) */
+#define XCHAL_HAVE_OCD_LS32DDR 1 /* L32DDR/S32DDR (faster OCD) */
+
+/* TRAX (in core) */
+#define XCHAL_HAVE_TRAX 1 /* TRAX in debug module */
+#define XCHAL_TRAX_MEM_SIZE 262144 /* TRAX memory size in bytes */
+#define XCHAL_TRAX_MEM_SHAREABLE 0 /* start/end regs; ready sig. */
+#define XCHAL_TRAX_ATB_WIDTH 0 /* ATB width (bits), 0=no ATB */
+#define XCHAL_TRAX_TIME_WIDTH 0 /* timestamp bitwidth, 0=none */
+
+/* Perf counters */
+#define XCHAL_NUM_PERF_COUNTERS 0 /* performance counters */
+
+
+/*----------------------------------------------------------------------
+ MMU
+ ----------------------------------------------------------------------*/
+
+/* See core-matmap.h header file for more details. */
+
+#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */
+#define XCHAL_HAVE_SPANNING_WAY 1 /* one way maps I+D 4GB vaddr */
+#define XCHAL_SPANNING_WAY 0 /* TLB spanning way number */
+#define XCHAL_HAVE_IDENTITY_MAP 1 /* vaddr == paddr always */
+#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */
+#define XCHAL_HAVE_MIMIC_CACHEATTR 1 /* region protection */
+#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */
+#define XCHAL_HAVE_PTP_MMU 0 /* full MMU (with page table
+ [autorefill] and protection)
+ usable for an MMU-based OS */
+/* If none of the above last 4 are set, it's a custom TLB configuration. */
+
+#define XCHAL_MMU_ASID_BITS 0 /* number of bits in ASIDs */
+#define XCHAL_MMU_RINGS 1 /* number of rings (1..4) */
+#define XCHAL_MMU_RING_BITS 0 /* num of bits in RING field */
+
+#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */
+
+
+#endif /* _XTENSA_CORE_CONFIGURATION_H */
+
--- /dev/null
+/*
+ * tie-asm.h -- compile-time HAL assembler definitions dependent on CORE & TIE
+ *
+ * NOTE: This header file is not meant to be included directly.
+ */
+
+/* This header file contains assembly-language definitions (assembly
+ macros, etc.) for this specific Xtensa processor's TIE extensions
+ and options. It is customized to this Xtensa processor configuration.
+
+ Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_TIE_ASM_H
+#define _XTENSA_CORE_TIE_ASM_H
+
+/* Selection parameter values for save-area save/restore macros: */
+/* Option vs. TIE: */
+#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */
+#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */
+#define XTHAL_SAS_ANYOT 0x0003 /* both of the above */
+/* Whether used automatically by compiler: */
+#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */
+#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */
+#define XTHAL_SAS_ANYCC 0x000C /* both of the above */
+/* ABI handling across function calls: */
+#define XTHAL_SAS_CALR 0x0010 /* caller-saved */
+#define XTHAL_SAS_CALE 0x0020 /* callee-saved */
+#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */
+#define XTHAL_SAS_ANYABI 0x0070 /* all of the above three */
+/* Misc */
+#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */
+#define XTHAL_SAS3(optie,ccuse,abi) ( ((optie) & XTHAL_SAS_ANYOT) \
+ | ((ccuse) & XTHAL_SAS_ANYCC) \
+ | ((abi) & XTHAL_SAS_ANYABI) )
+
+
+ /*
+ * Macro to store all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 4 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters:
+ * continue If macro invoked as part of a larger store sequence, set to 1
+ * if this is not the first in the sequence. Defaults to 0.
+ * ofs Offset from start of larger sequence (from value of first ptr
+ * in sequence) at which to store. Defaults to next available space
+ * (or 0 if <continue> is 0).
+ * select Select what category(ies) of registers to store, as a bitmask
+ * (see XTHAL_SAS_xxx constants). Defaults to all registers.
+ * alloc Select what category(ies) of registers to allocate; if any
+ * category is selected here that is not in <select>, space for
+ * the corresponding registers is skipped without doing any store.
+ */
+ .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Optional caller-saved registers used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ rsr.ACCLO \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ rsr.ACCHI \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .endif
+ // Optional caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1004, 4, 4
+ rsr.SCOMPARE1 \at1 // conditional store option
+ s32i \at1, \ptr, .Lxchal_ofs_+0
+ rsr.M0 \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+4
+ rsr.M1 \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+8
+ rsr.M2 \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+12
+ rsr.M3 \at1 // MAC16 option
+ s32i \at1, \ptr, .Lxchal_ofs_+16
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 20
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1004, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 20
+ .endif
+ .endm // xchal_ncp_store
+
+ /*
+ * Macro to load all non-coprocessor (extra) custom TIE and optional state
+ * (not including zero-overhead loop registers).
+ * Required parameters:
+ * ptr Save area pointer address register (clobbered)
+ * (register must contain a 4 byte aligned address).
+ * at1..at4 Four temporary address registers (first XCHAL_NCP_NUM_ATMPS
+ * registers are clobbered, the remaining are unused).
+ * Optional parameters:
+ * continue If macro invoked as part of a larger load sequence, set to 1
+ * if this is not the first in the sequence. Defaults to 0.
+ * ofs Offset from start of larger sequence (from value of first ptr
+ * in sequence) at which to load. Defaults to next available space
+ * (or 0 if <continue> is 0).
+ * select Select what category(ies) of registers to load, as a bitmask
+ * (see XTHAL_SAS_xxx constants). Defaults to all registers.
+ * alloc Select what category(ies) of registers to allocate; if any
+ * category is selected here that is not in <select>, space for
+ * the corresponding registers is skipped without doing any load.
+ */
+ .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL alloc=0
+ xchal_sa_start \continue, \ofs
+ // Optional caller-saved registers used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wsr.ACCLO \at1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+4
+ wsr.ACCHI \at1 // MAC16 option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1016, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 8
+ .endif
+ // Optional caller-saved registers not used by default by the compiler:
+ .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\select)
+ xchal_sa_align \ptr, 0, 1004, 4, 4
+ l32i \at1, \ptr, .Lxchal_ofs_+0
+ wsr.SCOMPARE1 \at1 // conditional store option
+ l32i \at1, \ptr, .Lxchal_ofs_+4
+ wsr.M0 \at1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+8
+ wsr.M1 \at1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+12
+ wsr.M2 \at1 // MAC16 option
+ l32i \at1, \ptr, .Lxchal_ofs_+16
+ wsr.M3 \at1 // MAC16 option
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 20
+ .elseif ((XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~(\alloc)) == 0
+ xchal_sa_align \ptr, 0, 1004, 4, 4
+ .set .Lxchal_ofs_, .Lxchal_ofs_ + 20
+ .endif
+ .endm // xchal_ncp_load
+
+
+#define XCHAL_NCP_NUM_ATMPS 1
+
+#define XCHAL_SA_NUM_ATMPS 1
+
+#endif /*_XTENSA_CORE_TIE_ASM_H*/
+
--- /dev/null
+/*
+ * tie.h -- compile-time HAL definitions dependent on CORE & TIE configuration
+ *
+ * NOTE: This header file is not meant to be included directly.
+ */
+
+/* This header file describes this specific Xtensa processor's TIE extensions
+ that extend basic Xtensa core functionality. It is customized to this
+ Xtensa processor configuration.
+
+ Copyright (c) 1999-2015 Cadence Design Systems Inc.
+
+ Permission is hereby granted, free of charge, to any person obtaining
+ a copy of this software and associated documentation files (the
+ "Software"), to deal in the Software without restriction, including
+ without limitation the rights to use, copy, modify, merge, publish,
+ distribute, sublicense, and/or sell copies of the Software, and to
+ permit persons to whom the Software is furnished to do so, subject to
+ the following conditions:
+
+ The above copyright notice and this permission notice shall be included
+ in all copies or substantial portions of the Software.
+
+ THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+ CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+ TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+ SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */
+
+#ifndef _XTENSA_CORE_TIE_H
+#define _XTENSA_CORE_TIE_H
+
+#define XCHAL_CP_NUM 0 /* number of coprocessors */
+#define XCHAL_CP_MAX 0 /* max CP ID + 1 (0 if none) */
+#define XCHAL_CP_MASK 0x00 /* bitmask of all CPs by ID */
+#define XCHAL_CP_PORT_MASK 0x00 /* bitmask of only port CPs */
+
+/* Save area for non-coprocessor optional and custom (TIE) state: */
+#define XCHAL_NCP_SA_SIZE 28
+#define XCHAL_NCP_SA_ALIGN 4
+
+/* Total save area for optional and custom state (NCP + CPn): */
+#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */
+#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */
+
+/*
+ * Detailed contents of save areas.
+ * NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
+ * before expanding the XCHAL_xxx_SA_LIST() macros.
+ *
+ * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
+ * dbnum,base,regnum,bitsz,gapsz,reset,x...)
+ *
+ * s = passed from XCHAL_*_LIST(s), eg. to select how to expand
+ * ccused = set if used by compiler without special options or code
+ * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
+ * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
+ * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
+ * name = lowercase reg name (no quotes)
+ * galign = group byte alignment (power of 2) (galign >= align)
+ * align = register byte alignment (power of 2)
+ * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
+ * (not including any pad bytes required to galign this or next reg)
+ * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
+ * base = reg shortname w/o index (or sr=special, ur=TIE user reg)
+ * regnum = reg index in regfile, or special/TIE-user reg number
+ * bitsz = number of significant bits (regfile width, or ur/sr mask bits)
+ * gapsz = intervening bits, if bitsz bits not stored contiguously
+ * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
+ * reset = register reset value (or 0 if undefined at reset)
+ * x = reserved for future use (0 until then)
+ *
+ * To filter out certain registers, e.g. to expand only the non-global
+ * registers used by the compiler, you can do something like this:
+ *
+ * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
+ * #define SELCC0(p...)
+ * #define SELCC1(abikind,p...) SELAK##abikind(p)
+ * #define SELAK0(p...) REG(p)
+ * #define SELAK1(p...) REG(p)
+ * #define SELAK2(p...)
+ * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
+ * ...what you want to expand...
+ */
+
+#define XCHAL_NCP_SA_NUM 7
+#define XCHAL_NCP_SA_LIST(s) \
+ XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \
+ XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \
+ XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0)
+
+#define XCHAL_CP0_SA_NUM 0
+#define XCHAL_CP0_SA_LIST(s) /* empty */
+
+#define XCHAL_CP1_SA_NUM 0
+#define XCHAL_CP1_SA_LIST(s) /* empty */
+
+#define XCHAL_CP2_SA_NUM 0
+#define XCHAL_CP2_SA_LIST(s) /* empty */
+
+#define XCHAL_CP3_SA_NUM 0
+#define XCHAL_CP3_SA_LIST(s) /* empty */
+
+#define XCHAL_CP4_SA_NUM 0
+#define XCHAL_CP4_SA_LIST(s) /* empty */
+
+#define XCHAL_CP5_SA_NUM 0
+#define XCHAL_CP5_SA_LIST(s) /* empty */
+
+#define XCHAL_CP6_SA_NUM 0
+#define XCHAL_CP6_SA_LIST(s) /* empty */
+
+#define XCHAL_CP7_SA_NUM 0
+#define XCHAL_CP7_SA_LIST(s) /* empty */
+
+/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
+#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+/* Byte length of instruction from its first byte, per FLIX. */
+#define XCHAL_BYTE0_FORMAT_LENGTHS \
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3,\
+ 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3, 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
+
+#endif /*_XTENSA_CORE_TIE_H*/
+
projects / firefly-linux-kernel-4.4.55.git / commitdiff