ARM: dts: Add phyBOARD-WEGA-AM335x rdk
authorTeresa Remmet <t.remmet@phytec.de>
Thu, 16 Jul 2015 08:30:49 +0000 (10:30 +0200)
committerTony Lindgren <tony@atomide.com>
Tue, 21 Jul 2015 10:58:26 +0000 (03:58 -0700)
phyBOARD-WEGA-AM335x represents a direct soldered
combination of a phyCORE-AM335x SoM and carrier board.

Different kind of SoM options can be connected to
the wega carrier board. So we created a separate
wega dtsi file. The final dts contains the actual
SoM on the carrier board.

WEGA carrier board features:
* ETH phy on carrier board: 1x MII
* 1x CAN
* 2x UART
* USB0 (device)
* USB1 (host)
* mSD slot

Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Documentation/devicetree/bindings/arm/omap/omap.txt
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/am335x-wega-rdk.dts [new file with mode: 0644]
arch/arm/boot/dts/am335x-wega.dtsi [new file with mode: 0644]

index 4f6a82cef1d1a4f74a22304fb62c7abf48897ae1..9f4e5136e5681b7068fac0aacdb907e2994b23e3 100644 (file)
@@ -135,6 +135,9 @@ Boards:
 - AM335X OrionLXm : Substation Automation Platform
   compatible = "novatech,am335x-lxm", "ti,am33xx"
 
+- AM335X phyBOARD-WEGA: Single Board Computer dev kit
+  compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"
+
 - OMAP5 EVM : Evaluation Module
   compatible = "ti,omap5-evm", "ti,omap5"
 
index 1c62928587e0a5131228dc92f94524c7f0c15530..1808463650811582e4889fbebf8082dd47ebfd2d 100644 (file)
@@ -442,7 +442,8 @@ dtb-$(CONFIG_SOC_AM33XX) += \
        am335x-nano.dtb \
        am335x-pepper.dtb \
        am335x-lxm.dtb \
-       am335x-chiliboard.dtb
+       am335x-chiliboard.dtb \
+       am335x-wega-rdk.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
        omap4-duovero-parlor.dtb \
        omap4-panda.dtb \
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
new file mode 100644 (file)
index 0000000..6431b7d
--- /dev/null
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-wega.dtsi"
+
+/* SoM */
+&i2c_eeprom {
+       status = "okay";
+};
+
+&i2c_rtc {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
new file mode 100644 (file)
index 0000000..5e541bd
--- /dev/null
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/ {
+       model = "Phytec AM335x phyBOARD-WEGA";
+       compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+       dcan1_pins: pinmux_dcan1 {
+               pinctrl-single,pins = <
+                       0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+                       0x16c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+               >;
+       };
+};
+
+&dcan1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&dcan1_pins>;
+       status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+       ethernet1_pins: pinmux_ethernet1 {
+               pinctrl-single,pins = <
+                       0x40 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a0.mii2_txen */
+                       0x44 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a1.mii2_rxdv */
+                       0x48 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a2.mii2_txd3 */
+                       0x4c (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a3.mii2_txd2 */
+                       0x50 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a4.mii2_txd1 */
+                       0x54 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_a5.mii2_txd0 */
+                       0x58 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a6.mii2_txclk */
+                       0x5c (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a7.mii2_rxclk */
+                       0x60 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a8.mii2_rxd3 */
+                       0x64 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a9.mii2_rxd2 */
+                       0x68 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a10.mii2_rxd1 */
+                       0x6c (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_a11.mii2_rxd0 */
+                       0x74 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_wpn.mii2_rxerr */
+                       0x78 (PIN_INPUT_PULLDOWN | MUX_MODE1)   /* gpmc_ben1.mii2_col */
+               >;
+       };
+};
+
+&cpsw_emac1 {
+       phy_id = <&davinci_mdio>, <1>;
+       phy-mode = "mii";
+       dual_emac_res_vlan = <2>;
+};
+
+&mac {
+       slaves = <2>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+       dual_emac = <1>;
+};
+
+/* MMC */
+&am33xx_pinmux {
+       mmc1_pins: pinmux_mmc1 {
+               pinctrl-single,pins = <
+                       0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat3.mmc0_dat3 */
+                       0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat2.mmc0_dat2 */
+                       0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat1.mmc0_dat1 */
+                       0x0FC (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat0.mmc0_dat0 */
+                       0x100 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_clk.mmc0_clk */
+                       0x104 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_cmd.mmc0_cmd */
+                       0x160 (PIN_INPUT_PULLUP | MUX_MODE7)    /* spi0_cs1.mmc0_sdcd */
+               >;
+       };
+};
+
+&mmc1 {
+       vmmc-supply = <&vmmc_reg>;
+       bus-width = <4>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins>;
+       cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+       uart0_pins: pinmux_uart0 {
+               pinctrl-single,pins = <
+                       0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+                       0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+               >;
+       };
+
+       uart1_pins: pinmux_uart1_pins {
+               pinctrl-single,pins = <
+                       0x180 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart1_rxd.uart1_rxd */
+                       0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
+                       0x178 (PIN_INPUT | MUX_MODE0)           /* uart1_ctsn.uart1_ctsn */
+                       0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)         /* uart1_rtsn.uart1_rtsn */
+               >;
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart1_pins>;
+       status = "okay";
+};
+
+/* USB */
+&cppi41dma {
+       status = "okay";
+};
+
+&usb_ctrl_mod {
+       status = "okay";
+};
+
+&usb {
+       status = "okay";
+};
+
+&usb0 {
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
+&usb0_phy {
+       status = "okay";
+};
+
+&usb1 {
+       dr_mode = "host";
+       status = "okay";
+};
+
+&usb1_phy {
+       status = "okay";
+};