ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board
authorGary Bisson <gary.bisson@boundarydevices.com>
Wed, 30 Sep 2015 13:46:46 +0000 (15:46 +0200)
committerShawn Guo <shawnguo@kernel.org>
Mon, 19 Oct 2015 14:45:24 +0000 (22:45 +0800)
Based on an i.MX6 Solo with 512MB DDR3.

http://boundarydevices.com/product/nitrogen6_lite/

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/imx6dl-nit6xlite.dts [new file with mode: 0644]
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi [new file with mode: 0644]

index cc2951537fa8c104e8883078b16ee3b2974ae2be..b4afb42e2fc5b0e4b2dd9b99adf9f67367836fba 100644 (file)
@@ -284,6 +284,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
        imx6dl-gw551x.dtb \
        imx6dl-gw552x.dtb \
        imx6dl-hummingboard.dtb \
+       imx6dl-nit6xlite.dtb \
        imx6dl-nitrogen6x.dtb \
        imx6dl-phytec-pbab01.dtb \
        imx6dl-rex-basic.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
new file mode 100644 (file)
index 0000000..e0161e4
--- /dev/null
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nit6xlite.dtsi"
+
+/ {
+       model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
+       compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
new file mode 100644 (file)
index 0000000..24d7d3f
--- /dev/null
@@ -0,0 +1,630 @@
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       chosen {
+               stdout-path = &uart2;
+       };
+
+       memory {
+               reg = <0x10000000 0x20000000>;
+       };
+
+       regulators {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               reg_2p5v: regulator@0 {
+                       compatible = "regulator-fixed";
+                       reg = <0>;
+                       regulator-name = "2P5V";
+                       regulator-min-microvolt = <2500000>;
+                       regulator-max-microvolt = <2500000>;
+                       regulator-always-on;
+               };
+
+               reg_3p3v: regulator@1 {
+                       compatible = "regulator-fixed";
+                       reg = <1>;
+                       regulator-name = "3P3V";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               reg_usb_otg_vbus: regulator@2 {
+                       compatible = "regulator-fixed";
+                       reg = <2>;
+                       regulator-name = "usb_otg_vbus";
+                       regulator-min-microvolt = <5000000>;
+                       regulator-max-microvolt = <5000000>;
+                       gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+                       enable-active-high;
+               };
+
+               reg_wlan_vmmc: regulator@3 {
+                       compatible = "regulator-fixed";
+                       reg = <3>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_wlan_vmmc>;
+                       regulator-name = "reg_wlan_vmmc";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <1800000>;
+                       gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+                       startup-delay-us = <70000>;
+                       enable-active-high;
+               };
+       };
+
+       bt_rfkill {
+               compatible = "rfkill-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_bt_rfkill>;
+               gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+               name = "bt_rfkill";
+               type = <2>;
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_keys>;
+
+               home {
+                       label = "Home";
+                       gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+                       linux,code = <102>;
+               };
+
+               back {
+                       label = "Back";
+                       gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+                       linux,code = <158>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_leds>;
+
+               j14-pin1 {
+                       gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+                       retain-state-suspended;
+                       default-state = "off";
+               };
+
+               j14-pin3 {
+                       gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+                       retain-state-suspended;
+                       default-state = "off";
+               };
+
+               j14-pins8-9 {
+                       gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+                       retain-state-suspended;
+                       default-state = "off";
+               };
+
+               j46-pin2 {
+                       gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                       retain-state-suspended;
+                       default-state = "off";
+               };
+
+               j46-pin3 {
+                       gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+                       retain-state-suspended;
+                       default-state = "off";
+               };
+       };
+
+       backlight_lcd {
+               compatible = "pwm-backlight";
+               pwms = <&pwm1 0 5000000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <7>;
+               power-supply = <&reg_3p3v>;
+               status = "okay";
+       };
+
+       backlight_lvds0: backlight_lvds0 {
+               compatible = "pwm-backlight";
+               pwms = <&pwm4 0 5000000>;
+               brightness-levels = <0 4 8 16 32 64 128 255>;
+               default-brightness-level = <7>;
+               power-supply = <&reg_3p3v>;
+               status = "okay";
+       };
+
+       panel_lvds0 {
+               compatible = "hannstar,hsd100pxn1";
+               backlight = <&backlight_lvds0>;
+
+               port {
+                       panel_in_lvds0: endpoint {
+                               remote-endpoint = <&lvds0_out>;
+                       };
+               };
+       };
+
+       sound {
+               compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+                            "fsl,imx-audio-sgtl5000";
+               model = "imx6dl-nit6xlite-sgtl5000";
+               ssi-controller = <&ssi1>;
+               audio-codec = <&codec>;
+               audio-routing =
+                       "MIC_IN", "Mic Jack",
+                       "Mic Jack", "Mic Bias",
+                       "Headphone Jack", "HP_OUT";
+               mux-int-port = <1>;
+               mux-ext-port = <3>;
+       };
+};
+
+&audmux {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_audmux>;
+       status = "okay";
+};
+
+&clks {
+       assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+                         <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+       assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+                                <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+       fsl,spi-num-chipselects = <1>;
+       cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ecspi1>;
+       status = "okay";
+
+       flash: m25p80@0 {
+               compatible = "microchip,sst25vf016b";
+               spi-max-frequency = <20000000>;
+               reg = <0>;
+       };
+};
+
+&fec {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_enet>;
+       phy-mode = "rgmii";
+       phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+       txen-skew-ps = <0>;
+       txc-skew-ps = <3000>;
+       rxdv-skew-ps = <0>;
+       rxc-skew-ps = <3000>;
+       rxd0-skew-ps = <0>;
+       rxd1-skew-ps = <0>;
+       rxd2-skew-ps = <0>;
+       rxd3-skew-ps = <0>;
+       txd0-skew-ps = <0>;
+       txd1-skew-ps = <0>;
+       txd2-skew-ps = <0>;
+       txd3-skew-ps = <0>;
+       interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+                             <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+       status = "okay";
+};
+
+&hdmi {
+       ddc-i2c-bus = <&i2c2>;
+       status = "okay";
+};
+
+&i2c1 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c1>;
+       status = "okay";
+
+       codec: sgtl5000@0a {
+               compatible = "fsl,sgtl5000";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_sgtl5000>;
+               reg = <0x0a>;
+               clocks = <&clks 201>;
+               VDDA-supply = <&reg_2p5v>;
+               VDDIO-supply = <&reg_3p3v>;
+       };
+};
+
+&i2c2 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c2>;
+       status = "okay";
+};
+
+&i2c3 {
+       clock-frequency = <100000>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_i2c3>;
+       status = "okay";
+
+       touchscreen@04 {
+               compatible = "eeti,egalax_ts";
+               reg = <0x04>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+               wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+       };
+
+       touchscreen@38 {
+               compatible = "edt,edt-ft5x06";
+               reg = <0x38>;
+               interrupt-parent = <&gpio1>;
+               interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+       };
+
+       rtc@6f {
+               compatible = "isil,isl1208";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_rtc>;
+               reg = <0x6f>;
+               interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
+&iomuxc {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_j10>;
+       pinctrl-1 = <&pinctrl_j28>;
+
+       imx6dl-nit6xlite {
+               pinctrl_audmux: audmuxgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
+                               MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
+                               MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
+                               MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
+                       >;
+               };
+
+               pinctrl_bt_rfkill: bt_rfkillgrp {
+                       fsl,pins = <
+                               /* BT wake */
+                               MX6QDL_PAD_NANDF_D2__GPIO2_IO02         0x1b0b0
+                               /* BT reset */
+                               MX6QDL_PAD_NANDF_ALE__GPIO6_IO08        0x0b0b0
+                               /* BT reg en */
+                               MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x1b0b0
+                               /* BT host wake irq */
+                               MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x100b0
+                       >;
+               };
+
+               pinctrl_ecspi1: ecspi1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
+                               MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
+                               MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
+                               MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x000b1
+                       >;
+               };
+
+               pinctrl_enet: enetgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x100b0
+                               MX6QDL_PAD_ENET_MDC__ENET_MDC           0x100b0
+                               MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x100b0
+                               MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x100b0
+                               MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x100b0
+                               MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x100b0
+                               MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x100b0
+                               MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x100b0
+                               MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x100b0
+                               MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b0b0
+                               MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b0b0
+                               MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
+                               /* Phy reset */
+                               MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x0f0b0
+                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0
+                               MX6QDL_PAD_GPIO_6__ENET_IRQ             0x000b1
+                       >;
+               };
+
+               pinctrl_gpio_keys: gpio_keysgrp {
+                       fsl,pins = <
+                               /* Home Button: J14 pin 5 */
+                               MX6QDL_PAD_GPIO_18__GPIO7_IO13          0x1b0b0
+                               /* Back Button: J14 pin 7 */
+                               MX6QDL_PAD_GPIO_19__GPIO4_IO05          0x1b0b0
+                       >;
+               };
+
+               pinctrl_i2c1: i2c1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D21__I2C1_SCL    0x4001b8b1
+                               MX6QDL_PAD_EIM_D28__I2C1_SDA    0x4001b8b1
+                       >;
+               };
+
+               pinctrl_i2c2: i2c2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL3__I2C2_SCL   0x4001b8b1
+                               MX6QDL_PAD_KEY_ROW3__I2C2_SDA   0x4001b8b1
+                       >;
+               };
+
+               pinctrl_i2c3: i2c3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_5__I2C3_SCL     0x4001b8b1
+                               MX6QDL_PAD_GPIO_16__I2C3_SDA    0x4001b8b1
+                               /* Touch IRQ: J7 pin 4 */
+                               MX6QDL_PAD_GPIO_9__GPIO1_IO09   0x1b0b0
+                               /* tcs2004 IRQ */
+                               MX6QDL_PAD_EIM_LBA__GPIO2_IO27  0x1b0b0
+                               /* tsc2004 reset */
+                               MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0
+                       >;
+               };
+
+               pinctrl_j10: j10grp {
+                       fsl,pins = <
+                               /* Broadcom WiFi module pins */
+                               MX6QDL_PAD_NANDF_D0__GPIO2_IO00         0x1b0b0
+                               MX6QDL_PAD_NANDF_D1__GPIO2_IO01         0x1b0b0
+                               MX6QDL_PAD_NANDF_D3__GPIO2_IO03         0x1b0b0
+                               MX6QDL_PAD_NANDF_D4__GPIO2_IO04         0x1b0b0
+                               MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09       0x0b0b0
+                               MX6QDL_PAD_NANDF_CS1__GPIO6_IO14        0x1b0b0
+                               MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT      0x000b0
+                       >;
+               };
+
+               pinctrl_j28: j28grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b0
+                       >;
+               };
+
+               pinctrl_leds: ledsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x0b0b0
+                               MX6QDL_PAD_GPIO_3__GPIO1_IO03           0x0b0b0
+                               MX6QDL_PAD_EIM_D29__GPIO3_IO29          0x030b0
+                               MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x0b0b0
+                               MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x0b0b0
+                       >;
+               };
+
+               pinctrl_pwm1: pwm1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_DAT3__PWM1_OUT           0x1b0b1
+                       >;
+               };
+
+               pinctrl_pwm3: pwm3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
+                       >;
+               };
+
+               pinctrl_pwm4: pwm4grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
+                       >;
+               };
+
+               pinctrl_wlan_vmmc: wlan_vmmcgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_NANDF_CLE__GPIO6_IO07        0x030b0
+                       >;
+               };
+
+               pinctrl_rtc: rtcgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_RW__GPIO2_IO26           0x1b0b0
+                       >;
+               };
+
+               pinctrl_sgtl5000: sgtl5000grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x000b0
+                               MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b0
+                       >;
+               };
+
+               pinctrl_uart1: uart1grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
+                               MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA      0x1b0b1
+                       >;
+               };
+
+               pinctrl_uart2: uart2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+                               MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+                       >;
+               };
+
+               pinctrl_uart3: uart3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
+                               MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
+                               MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
+                               MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
+                       >;
+               };
+
+               pinctrl_usbotg: usbotggrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                               MX6QDL_PAD_KEY_COL4__USB_OTG_OC         0x1b0b0
+                               /* power enable, high active */
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x000b0
+                       >;
+               };
+
+               pinctrl_usdhc2: usdhc2grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
+                               MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
+                               MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
+                               MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
+                               MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
+                               MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
+                       >;
+               };
+
+               pinctrl_usdhc3: usdhc3grp {
+                       fsl,pins = <
+                               MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
+                               MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
+                               MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
+                               MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
+                               MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
+                               MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
+                               MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0
+                       >;
+               };
+       };
+};
+
+&ldb {
+       status = "okay";
+
+       lvds-channel@0 {
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               port@4 {
+                       reg = <4>;
+
+                       lvds0_out: endpoint {
+                               remote-endpoint = <&panel_in_lvds0>;
+                       };
+               };
+       };
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pwm1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm1>;
+       status = "okay";
+};
+
+&pwm3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm3>;
+       status = "okay";
+};
+
+&pwm4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm4>;
+       status = "okay";
+};
+
+&ssi1 {
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart3>;
+       fsl,uart-has-rtscts;
+       status = "okay";
+};
+
+&usbh1 {
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usdhc2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc2>;
+       bus-width = <4>;
+       non-removable;
+       vmmc-supply = <&reg_3p3v>;
+       vqmmc-supply = <&reg_wlan_vmmc>;
+       vqmmc-1-8-v;
+       ocr-limit = <0x180>;     /* 1.65v - 2.1v */
+       cap-power-off-card;
+       keep-power-in-suspend;
+       status = "okay";
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};