ath9k: Remove dead code in rate control
authorVasanthakumar Thiagarajan <vasanth@atheros.com>
Wed, 15 Jul 2009 00:14:10 +0000 (20:14 -0400)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 24 Jul 2009 19:05:16 +0000 (15:05 -0400)
ath9k rate control is based on only PER (packet error rate),
remove unused code which was intented to do rssi based rate
selection.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/rc.c

index e66734c2cae1a95bfc9b6107997e320754f77961..a39b1a7d3775e172985b1905f66a3923c7c93cb1 100644 (file)
@@ -607,47 +607,14 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
                                 const struct ath_rate_table *rate_table,
                                 int *is_probing)
 {
-       u32 dt, best_thruput, this_thruput, now_msec;
+       u32 best_thruput, this_thruput, now_msec;
        u8 rate, next_rate, best_rate, maxindex, minindex;
-       int8_t  rssi_last, rssi_reduce = 0, index = 0;
-
-       *is_probing = 0;
-
-       rssi_last = median(ath_rc_priv->rssi_last,
-                          ath_rc_priv->rssi_last_prev,
-                          ath_rc_priv->rssi_last_prev2);
-
-       /*
-        * Age (reduce) last ack rssi based on how old it is.
-        * The bizarre numbers are so the delta is 160msec,
-        * meaning we divide by 16.
-        *   0msec   <= dt <= 25msec:   don't derate
-        *   25msec  <= dt <= 185msec:  derate linearly from 0 to 10dB
-        *   185msec <= dt:             derate by 10dB
-        */
+       int8_t index = 0;
 
        now_msec = jiffies_to_msecs(jiffies);
-       dt = now_msec - ath_rc_priv->rssi_time;
-
-       if (dt >= 185)
-               rssi_reduce = 10;
-       else if (dt >= 25)
-               rssi_reduce = (u8)((dt - 25) >> 4);
-
-       /* Now reduce rssi_last by rssi_reduce */
-       if (rssi_last < rssi_reduce)
-               rssi_last = 0;
-       else
-               rssi_last -= rssi_reduce;
-
-       /*
-        * Now look up the rate in the rssi table and return it.
-        * If no rates match then we return 0 (lowest rate)
-        */
-
+       *is_probing = 0;
        best_thruput = 0;
        maxindex = ath_rc_priv->max_valid_rate-1;
-
        minindex = 0;
        best_rate = minindex;
 
@@ -687,7 +654,6 @@ static u8 ath_rc_get_highest_rix(struct ath_softc *sc,
        }
 
        rate = best_rate;
-       ath_rc_priv->rssi_last_lookup = rssi_last;
 
        /*
         * Must check the actual rate (ratekbps) to account for
@@ -977,10 +943,6 @@ static bool ath_rc_update_per(struct ath_softc *sc,
                                     (nretry_to_per_lookup[retries] >> 3));
                }
 
-               ath_rc_priv->rssi_last_prev2 = ath_rc_priv->rssi_last_prev;
-               ath_rc_priv->rssi_last_prev  = ath_rc_priv->rssi_last;
-               ath_rc_priv->rssi_last = tx_info_priv->tx.ts_rssi;
-               ath_rc_priv->rssi_time = now_msec;
 
                /*
                 * If we got at most one retry then increase the max rate if
@@ -1024,18 +986,9 @@ static bool ath_rc_update_per(struct ath_softc *sc,
                        /*
                         * Don't update anything.  We don't know if
                         * this was because of collisions or poor signal.
-                        *
-                        * Later: if rssi_ack is close to
-                        * ath_rc_priv->state[txRate].rssi_thres and we see lots
-                        * of retries, then we could increase
-                        * ath_rc_priv->state[txRate].rssi_thres.
                         */
                        ath_rc_priv->hw_maxretry_pktcnt = 0;
                } else {
-                       int32_t rssi_ackAvg;
-                       int8_t rssi_thres;
-                       int8_t rssi_ack_vmin;
-
                        /*
                         * It worked with no retries. First ignore bogus (small)
                         * rssi_ack values.
@@ -1045,43 +998,9 @@ static bool ath_rc_update_per(struct ath_softc *sc,
                                ath_rc_priv->hw_maxretry_pktcnt++;
                        }
 
-                       if (tx_info_priv->tx.ts_rssi <
-                           rate_table->info[tx_rate].rssi_ack_validmin)
-                               goto exit;
-
-                       /* Average the rssi */
-                       if (tx_rate != ath_rc_priv->rssi_sum_rate) {
-                               ath_rc_priv->rssi_sum_rate = tx_rate;
-                               ath_rc_priv->rssi_sum =
-                                       ath_rc_priv->rssi_sum_cnt = 0;
-                       }
-
-                       ath_rc_priv->rssi_sum += tx_info_priv->tx.ts_rssi;
-                       ath_rc_priv->rssi_sum_cnt++;
-
-                       if (ath_rc_priv->rssi_sum_cnt < 4)
-                               goto exit;
-
-                       rssi_ackAvg =
-                               (ath_rc_priv->rssi_sum + 2) / 4;
-                       rssi_thres =
-                               ath_rc_priv->state[tx_rate].rssi_thres;
-                       rssi_ack_vmin =
-                               rate_table->info[tx_rate].rssi_ack_validmin;
-
-                       ath_rc_priv->rssi_sum =
-                               ath_rc_priv->rssi_sum_cnt = 0;
-
-                       /* Now reduce the current rssi threshold */
-                       if ((rssi_ackAvg < rssi_thres + 2) &&
-                           (rssi_thres > rssi_ack_vmin)) {
-                               ath_rc_priv->state[tx_rate].rssi_thres--;
-                       }
-
-                       state_change = true;
                }
        }
-exit:
+
        return state_change;
 }
 
@@ -1093,11 +1012,6 @@ static void ath_rc_update_ht(struct ath_softc *sc,
                             struct ath_tx_info_priv *tx_info_priv,
                             int tx_rate, int xretries, int retries)
 {
-#define CHK_RSSI(rate)                                 \
-       ((ath_rc_priv->state[(rate)].rssi_thres +       \
-         rate_table->info[(rate)].rssi_ack_deltamin) > \
-        ath_rc_priv->state[(rate)+1].rssi_thres)
-
        u32 now_msec = jiffies_to_msecs(jiffies);
        int rate;
        u8 last_per;
@@ -1108,13 +1022,6 @@ static void ath_rc_update_ht(struct ath_softc *sc,
        if ((tx_rate < 0) || (tx_rate > rate_table->rate_cnt))
                return;
 
-       /* To compensate for some imbalance between ctrl and ext. channel */
-
-       if (WLAN_RC_PHY_40(rate_table->info[tx_rate].phy))
-               tx_info_priv->tx.ts_rssi =
-                       tx_info_priv->tx.ts_rssi < 3 ? 0 :
-                       tx_info_priv->tx.ts_rssi - 3;
-
        last_per = ath_rc_priv->state[tx_rate].per;
 
        /* Update PER first */
@@ -1136,51 +1043,6 @@ static void ath_rc_update_ht(struct ath_softc *sc,
                ath_rc_priv->probe_time = now_msec;
        }
 
-       if (state_change) {
-               /*
-                * Make sure the rates above this have higher rssi thresholds.
-                * (Note:  Monotonicity is kept within the OFDM rates and
-                *         within the CCK rates. However, no adjustment is
-                *         made to keep the rssi thresholds monotonically
-                *         increasing between the CCK and OFDM rates.)
-                */
-               for (rate = tx_rate; rate < size - 1; rate++) {
-                       if (rate_table->info[rate+1].phy !=
-                           rate_table->info[tx_rate].phy)
-                               break;
-
-                       if (CHK_RSSI(rate)) {
-                               ath_rc_priv->state[rate+1].rssi_thres =
-                                       ath_rc_priv->state[rate].rssi_thres +
-                                       rate_table->info[rate].rssi_ack_deltamin;
-                       }
-               }
-
-               /* Make sure the rates below this have lower rssi thresholds. */
-               for (rate = tx_rate - 1; rate >= 0; rate--) {
-                       if (rate_table->info[rate].phy !=
-                           rate_table->info[tx_rate].phy)
-                               break;
-
-                       if (CHK_RSSI(rate)) {
-                               if (ath_rc_priv->state[rate+1].rssi_thres <
-                                   rate_table->info[rate].rssi_ack_deltamin)
-                                       ath_rc_priv->state[rate].rssi_thres = 0;
-                               else {
-                                       ath_rc_priv->state[rate].rssi_thres =
-                                       ath_rc_priv->state[rate+1].rssi_thres -
-                                       rate_table->info[rate].rssi_ack_deltamin;
-                               }
-
-                               if (ath_rc_priv->state[rate].rssi_thres <
-                                   rate_table->info[rate].rssi_ack_validmin) {
-                                       ath_rc_priv->state[rate].rssi_thres =
-                                       rate_table->info[rate].rssi_ack_validmin;
-                               }
-                       }
-               }
-       }
-
        /* Make sure the rates below this have lower PER */
        /* Monotonicity is kept only for rates below the current rate. */
        if (ath_rc_priv->state[tx_rate].per < last_per) {
@@ -1205,19 +1067,6 @@ static void ath_rc_update_ht(struct ath_softc *sc,
                                ath_rc_priv->state[rate].per;
        }
 
-       /* Every so often, we reduce the thresholds and
-        * PER (different for CCK and OFDM). */
-       if (now_msec - ath_rc_priv->rssi_down_time >=
-           rate_table->rssi_reduce_interval) {
-
-               for (rate = 0; rate < size; rate++) {
-                       if (ath_rc_priv->state[rate].rssi_thres >
-                           rate_table->info[rate].rssi_ack_validmin)
-                               ath_rc_priv->state[rate].rssi_thres -= 1;
-               }
-               ath_rc_priv->rssi_down_time = now_msec;
-       }
-
        /* Every so often, we reduce the thresholds
         * and PER (different for CCK and OFDM). */
        if (now_msec - ath_rc_priv->per_down_time >=
@@ -1233,7 +1082,6 @@ static void ath_rc_update_ht(struct ath_softc *sc,
        ath_debug_stat_retries(sc, tx_rate, xretries, retries,
                               ath_rc_priv->state[tx_rate].per);
 
-#undef CHK_RSSI
 }
 
 static int ath_rc_get_rateindex(const struct ath_rate_table *rate_table,
@@ -1369,8 +1217,6 @@ static void ath_rc_init(struct ath_softc *sc,
 
        /* Initialize thresholds according to the global rate table */
        for (i = 0 ; i < ath_rc_priv->rate_table_size; i++) {
-               ath_rc_priv->state[i].rssi_thres =
-                       rate_table->info[i].rssi_ack_validmin;
                ath_rc_priv->state[i].per = 0;
        }
 
@@ -1631,7 +1477,6 @@ static void *ath_rate_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp
                return NULL;
        }
 
-       rate_priv->rssi_down_time = jiffies_to_msecs(jiffies);
        rate_priv->tx_triglevel_max = sc->sc_ah->caps.tx_triglevel_max;
 
        return rate_priv;