#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <mach/pxa168.h>
#include "common.h"
#include "clock.h"
static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(lcd, LCD, 0x7f, 312000000);
static APMU_CLK(eth, ETH, 0x09, 0);
+static APMU_CLK(usb, USB, 0x12, 0);
/* device and clock bindings */
static struct clk_lookup pxa168_clkregs[] = {
INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
+ INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
};
static int __init pxa168_init(void)
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
+
+struct resource pxa168_usb_host_resources[] = {
+ /* USB Host conroller register base */
+ [0] = {
+ .start = 0xd4209000,
+ .end = 0xd4209000 + 0x200,
+ .flags = IORESOURCE_MEM,
+ .name = "pxa168-usb-host",
+ },
+ /* USB PHY register base */
+ [1] = {
+ .start = 0xd4206000,
+ .end = 0xd4206000 + 0xff,
+ .flags = IORESOURCE_MEM,
+ .name = "pxa168-usb-phy",
+ },
+ [2] = {
+ .start = IRQ_PXA168_USB2,
+ .end = IRQ_PXA168_USB2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa168_usb_host_dmamask = DMA_BIT_MASK(32);
+struct platform_device pxa168_device_usb_host = {
+ .name = "pxa168-ehci",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxa168_usb_host_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+
+ .num_resources = ARRAY_SIZE(pxa168_usb_host_resources),
+ .resource = pxa168_usb_host_resources,
+};
+
+int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata)
+{
+ pxa168_device_usb_host.dev.platform_data = pdata;
+ return platform_device_register(&pxa168_device_usb_host);
+}
--- /dev/null
+/*
+ * drivers/usb/host/ehci-pxa168.c
+ *
+ * Tanmay Upadhyay <tanmay.upadhyay@einfochips.com>
+ *
+ * Based on drivers/usb/host/ehci-orion.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <mach/pxa168.h>
+
+#define USB_PHY_CTRL_REG 0x4
+#define USB_PHY_PLL_REG 0x8
+#define USB_PHY_TX_REG 0xc
+
+#define FBDIV_SHIFT 4
+
+#define ICP_SHIFT 12
+#define ICP_15 2
+#define ICP_20 3
+#define ICP_25 4
+
+#define KVCO_SHIFT 15
+
+#define PLLCALI12_SHIFT 25
+#define CALI12_VDD 0
+#define CALI12_09 1
+#define CALI12_10 2
+#define CALI12_11 3
+
+#define PLLVDD12_SHIFT 27
+#define VDD12_VDD 0
+#define VDD12_10 1
+#define VDD12_11 2
+#define VDD12_12 3
+
+#define PLLVDD18_SHIFT 29
+#define VDD18_19 0
+#define VDD18_20 1
+#define VDD18_21 2
+#define VDD18_22 3
+
+
+#define PLL_READY (1 << 23)
+#define VCOCAL_START (1 << 21)
+#define REG_RCAL_START (1 << 12)
+
+struct pxa168_usb_drv_data {
+ struct ehci_hcd ehci;
+ struct clk *pxa168_usb_clk;
+ struct resource *usb_phy_res;
+ void __iomem *usb_phy_reg_base;
+};
+
+static int ehci_pxa168_setup(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval;
+
+ ehci_reset(ehci);
+ retval = ehci_halt(ehci);
+ if (retval)
+ return retval;
+
+ /*
+ * data structure init
+ */
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ hcd->has_tt = 1;
+
+ ehci_port_power(ehci, 0);
+
+ return retval;
+}
+
+static const struct hc_driver ehci_pxa168_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Marvell PXA168 EHCI",
+ .hcd_priv_size = sizeof(struct pxa168_usb_drv_data),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_pxa168_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int pxa168_usb_phy_init(struct platform_device *pdev)
+{
+ struct resource *res;
+ void __iomem *usb_phy_reg_base;
+ struct pxa168_usb_pdata *pdata;
+ struct pxa168_usb_drv_data *drv_data;
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ unsigned long reg_val;
+ int pll_retry_cont = 10000, err = 0;
+
+ drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+ pdata = (struct pxa168_usb_pdata *)pdev->dev.platform_data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Found HC with no PHY register addr. Check %s setup!\n",
+ dev_name(&pdev->dev));
+ return -ENODEV;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res),
+ ehci_pxa168_hc_driver.description)) {
+ dev_dbg(&pdev->dev, "controller already in use\n");
+ return -EBUSY;
+ }
+
+ usb_phy_reg_base = ioremap(res->start, resource_size(res));
+ if (usb_phy_reg_base == NULL) {
+ dev_dbg(&pdev->dev, "error mapping memory\n");
+ err = -EFAULT;
+ goto err1;
+ }
+ drv_data->usb_phy_reg_base = usb_phy_reg_base;
+ drv_data->usb_phy_res = res;
+
+ /* If someone wants to init USB phy in board specific way */
+ if (pdata && pdata->phy_init)
+ return pdata->phy_init(usb_phy_reg_base);
+
+ /* Power up the PHY and PLL */
+ writel(readl(usb_phy_reg_base + USB_PHY_CTRL_REG) | 0x3,
+ usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+ /* Configure PHY PLL */
+ reg_val = readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~(0x7e03ffff);
+ reg_val |= (VDD18_22 << PLLVDD18_SHIFT | VDD12_12 << PLLVDD12_SHIFT |
+ CALI12_11 << PLLCALI12_SHIFT | 3 << KVCO_SHIFT |
+ ICP_15 << ICP_SHIFT | 0xee << FBDIV_SHIFT | 0xb);
+ writel(reg_val, usb_phy_reg_base + USB_PHY_PLL_REG);
+
+ /* Make sure PHY PLL is ready */
+ while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+ if (!(pll_retry_cont--)) {
+ dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+ err = -EIO;
+ goto err2;
+ }
+ }
+
+ /* Toggle VCOCAL_START bit of U2PLL for PLL calibration */
+ udelay(200);
+ writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) | VCOCAL_START,
+ usb_phy_reg_base + USB_PHY_PLL_REG);
+ udelay(40);
+ writel(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & ~VCOCAL_START,
+ usb_phy_reg_base + USB_PHY_PLL_REG);
+
+ /* Toggle REG_RCAL_START bit of U2PTX for impedance calibration */
+ udelay(400);
+ writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) | REG_RCAL_START,
+ usb_phy_reg_base + USB_PHY_TX_REG);
+ udelay(40);
+ writel(readl(usb_phy_reg_base + USB_PHY_TX_REG) & ~REG_RCAL_START,
+ usb_phy_reg_base + USB_PHY_TX_REG);
+
+ /* Make sure PHY PLL is ready again */
+ pll_retry_cont = 0;
+ while (!(readl(usb_phy_reg_base + USB_PHY_PLL_REG) & PLL_READY)) {
+ if (!(pll_retry_cont--)) {
+ dev_dbg(&pdev->dev, "USB PHY PLL not ready\n");
+ err = -EIO;
+ goto err2;
+ }
+ }
+
+ return 0;
+err2:
+ iounmap(usb_phy_reg_base);
+err1:
+ release_mem_region(res->start, resource_size(res));
+ return err;
+}
+
+static int __devinit ehci_pxa168_drv_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ struct pxa168_usb_drv_data *drv_data;
+ void __iomem *regs;
+ int irq, err = 0;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_debug("Initializing pxa168-SoC USB Host Controller\n");
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev,
+ "Found HC with no IRQ. Check %s setup!\n",
+ dev_name(&pdev->dev));
+ err = -ENODEV;
+ goto err1;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Found HC with no register addr. Check %s setup!\n",
+ dev_name(&pdev->dev));
+ err = -ENODEV;
+ goto err1;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res),
+ ehci_pxa168_hc_driver.description)) {
+ dev_dbg(&pdev->dev, "controller already in use\n");
+ err = -EBUSY;
+ goto err1;
+ }
+
+ regs = ioremap(res->start, resource_size(res));
+ if (regs == NULL) {
+ dev_dbg(&pdev->dev, "error mapping memory\n");
+ err = -EFAULT;
+ goto err2;
+ }
+
+ hcd = usb_create_hcd(&ehci_pxa168_hc_driver,
+ &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd) {
+ err = -ENOMEM;
+ goto err3;
+ }
+
+ drv_data = (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+ /* Enable USB clock */
+ drv_data->pxa168_usb_clk = clk_get(&pdev->dev, "PXA168-USBCLK");
+ if (IS_ERR(drv_data->pxa168_usb_clk)) {
+ dev_err(&pdev->dev, "Couldn't get USB clock\n");
+ err = PTR_ERR(drv_data->pxa168_usb_clk);
+ goto err4;
+ }
+ clk_enable(drv_data->pxa168_usb_clk);
+
+ err = pxa168_usb_phy_init(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "USB PHY initialization failed\n");
+ goto err5;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+ hcd->regs = regs;
+
+ ehci = hcd_to_ehci(hcd);
+ ehci->caps = hcd->regs + 0x100;
+ ehci->regs = hcd->regs + 0x100 +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+ hcd->has_tt = 1;
+ ehci->sbrn = 0x20;
+
+ err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
+ if (err)
+ goto err5;
+
+ return 0;
+
+err5:
+ clk_disable(drv_data->pxa168_usb_clk);
+ clk_put(drv_data->pxa168_usb_clk);
+err4:
+ usb_put_hcd(hcd);
+err3:
+ iounmap(regs);
+err2:
+ release_mem_region(res->start, resource_size(res));
+err1:
+ dev_err(&pdev->dev, "init %s fail, %d\n",
+ dev_name(&pdev->dev), err);
+
+ return err;
+}
+
+static int __exit ehci_pxa168_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct pxa168_usb_drv_data *drv_data =
+ (struct pxa168_usb_drv_data *)hcd->hcd_priv;
+
+ usb_remove_hcd(hcd);
+
+ /* Power down PHY & PLL */
+ writel(readl(drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG) & (~0x3),
+ drv_data->usb_phy_reg_base + USB_PHY_CTRL_REG);
+
+ clk_disable(drv_data->pxa168_usb_clk);
+ clk_put(drv_data->pxa168_usb_clk);
+
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ iounmap(drv_data->usb_phy_reg_base);
+ release_mem_region(drv_data->usb_phy_res->start,
+ resource_size(drv_data->usb_phy_res));
+
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:pxa168-ehci");
+
+static struct platform_driver ehci_pxa168_driver = {
+ .probe = ehci_pxa168_drv_probe,
+ .remove = __exit_p(ehci_pxa168_drv_remove),
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver.name = "pxa168-ehci",
+};
projects / firefly-linux-kernel-4.4.55.git / commitdiff