ide: move some bits from ide-timing.h to <linux/ide.h>
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 16 Jul 2008 18:33:36 +0000 (20:33 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Wed, 16 Jul 2008 18:33:36 +0000 (20:33 +0200)
Move struct ide_timing and IDE_TIMING_* defines to <linux/ide.h>
from drivers/ide/ide-timing.h.

While at it:

- use u8/u16 instead of short for struct ide_timing fields

- use enum for IDE_TIMING_*

There should be no functional changes caused by this patch.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/ide-timing.h
include/linux/ide.h

index ebe884d768811d28a60b5160972b834e8efbf03f..724879910ac8d4eb0fd902bd9ba02676832900ed 100644 (file)
 #include <linux/kernel.h>
 #include <linux/hdreg.h>
 
-struct ide_timing {
-       u8    mode;
-       short setup;    /* t1 */
-       short act8b;    /* t2 for 8-bit io */
-       short rec8b;    /* t2i for 8-bit io */
-       short cyc8b;    /* t0 for 8-bit io */
-       short active;   /* t2 or tD */
-       short recover;  /* t2i or tK */
-       short cycle;    /* t0 */
-       short udma;     /* t2CYCTYP/2 */
-};
-
 /*
  * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
  * These were taken from ATA/ATAPI-6 standard, rev 0a, except
@@ -79,17 +67,6 @@ static struct ide_timing ide_timing[] = {
        { 0xff }
 };
 
-#define IDE_TIMING_SETUP       0x01
-#define IDE_TIMING_ACT8B       0x02
-#define IDE_TIMING_REC8B       0x04
-#define IDE_TIMING_CYC8B       0x08
-#define IDE_TIMING_8BIT                0x0e
-#define IDE_TIMING_ACTIVE      0x10
-#define IDE_TIMING_RECOVER     0x20
-#define IDE_TIMING_CYCLE       0x40
-#define IDE_TIMING_UDMA                0x80
-#define IDE_TIMING_ALL         0xff
-
 #define ENOUGH(v,unit)         (((v)-1)/(unit)+1)
 #define EZ(v,unit)             ((v)?ENOUGH(v,unit):0)
 
index ac4eeb2932efb03a61484d1badbfd34620957a28..81c6ea436beb9ce0a047b34551238f5e5ede424e 100644 (file)
@@ -1271,6 +1271,34 @@ static inline int ide_dev_is_sata(struct hd_driveid *id)
 u64 ide_get_lba_addr(struct ide_taskfile *, int);
 u8 ide_dump_status(ide_drive_t *, const char *, u8);
 
+struct ide_timing {
+       u8  mode;
+       u8  setup;      /* t1 */
+       u16 act8b;      /* t2 for 8-bit io */
+       u16 rec8b;      /* t2i for 8-bit io */
+       u16 cyc8b;      /* t0 for 8-bit io */
+       u16 active;     /* t2 or tD */
+       u16 recover;    /* t2i or tK */
+       u16 cycle;      /* t0 */
+       u16 udma;       /* t2CYCTYP/2 */
+};
+
+enum {
+       IDE_TIMING_SETUP        = (1 << 0),
+       IDE_TIMING_ACT8B        = (1 << 1),
+       IDE_TIMING_REC8B        = (1 << 2),
+       IDE_TIMING_CYC8B        = (1 << 3),
+       IDE_TIMING_8BIT         = IDE_TIMING_ACT8B | IDE_TIMING_REC8B |
+                                 IDE_TIMING_CYC8B,
+       IDE_TIMING_ACTIVE       = (1 << 4),
+       IDE_TIMING_RECOVER      = (1 << 5),
+       IDE_TIMING_CYCLE        = (1 << 6),
+       IDE_TIMING_UDMA         = (1 << 7),
+       IDE_TIMING_ALL          = IDE_TIMING_SETUP | IDE_TIMING_8BIT |
+                                 IDE_TIMING_ACTIVE | IDE_TIMING_RECOVER |
+                                 IDE_TIMING_CYCLE | IDE_TIMING_UDMA,
+};
+
 typedef struct ide_pio_timings_s {
        int     setup_time;     /* Address setup (ns) minimum */
        int     active_time;    /* Active pulse (ns) minimum */