omap3: Introduce function to detect the IGEP v2 hardwarerevision
authorEnric Balletbo i Serra <eballetbo@gmail.com>
Fri, 8 Oct 2010 17:22:35 +0000 (10:22 -0700)
committerTony Lindgren <tony@atomide.com>
Fri, 8 Oct 2010 17:22:35 +0000 (10:22 -0700)
There are currently two versions of IGEP v2 board, this patch introduces a
function to detect the hardware revision of IGEP board.

  --------------------------
 | Id. | Hw Rev. | GPIO 28  |
  --------------------------
 |  0  |   B/C   |   high   |
 |  1  |   C     |   low    |
  --------------------------

Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/board-igep0020.c

index d7a0db7058e1d3e3e74482dfe0768402452871f3..e70bc872bc26f53fc235b556074acf6d6b36538d 100644 (file)
 #define IGEP2_GPIO_WIFI_NPD    94
 #define IGEP2_GPIO_WIFI_NRESET         95
 
+/*
+ * IGEP2 Hardware Revision Table
+ *
+ *  --------------------------
+ * | Id. | Hw Rev. | HW0 (28) |
+ *  --------------------------
+ * |  0  |   B/C   |   high   |
+ * |  1  |   C     |   low    |
+ *  --------------------------
+ */
+
+#define IGEP2_BOARD_HWREV_B    0
+#define IGEP2_BOARD_HWREV_C    1
+
+static u8 hwrev;
+
+static void __init igep2_get_revision(void)
+{
+       u8 ret;
+
+       omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT);
+
+       if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) &&
+           (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) {
+               ret = gpio_get_value(IGEP2_GPIO_LED1_RED);
+               if (ret == 0) {
+                       pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n");
+                       hwrev = IGEP2_BOARD_HWREV_C;
+               } else if (ret ==  1) {
+                       pr_info("IGEP2: Hardware Revision B/C (B compatible)\n");
+                       hwrev = IGEP2_BOARD_HWREV_B;
+               } else {
+                       pr_err("IGEP2: Unknown Hardware Revision\n");
+                       hwrev = -1;
+               }
+       } else {
+               pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n");
+               pr_err("IGEP2: Unknown Hardware Revision\n");
+       }
+
+       gpio_free(IGEP2_GPIO_LED1_RED);
+}
+
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \
        defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
 
@@ -538,6 +581,10 @@ static struct omap_board_mux board_mux[] __initdata = {
 static void __init igep2_init(void)
 {
        omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
+       /* Get IGEP2 hardware revision */
+       igep2_get_revision();
+
        igep2_i2c_init();
        platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
        omap_serial_init();