USB: Au1xxx-usb: suspend/resume support.
authorManuel Lauss <mano@roarinelk.homelinux.net>
Mon, 23 Jun 2008 07:09:37 +0000 (09:09 +0200)
committerGreg Kroah-Hartman <gregkh@suse.de>
Mon, 21 Jul 2008 22:16:44 +0000 (15:16 -0700)
Copy the OHCI/EHCI PM callbacks of the PCI implementation since
they work equally well on Au1xxx hardware.

Tested on Au1200.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/usb/host/ehci-au1xxx.c
drivers/usb/host/ohci-au1xxx.c

index 12ed80684ad154d6eb00e698c0d7dd77c5ddb3af..bf69f473910785465c8c20ef4be46ea7acab2946 100644 (file)
@@ -195,29 +195,124 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
        return 0;
 }
 
- /*TBD*/
-/*static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
+#ifdef CONFIG_PM
+static int ehci_hcd_au1xxx_drv_suspend(struct platform_device *pdev,
+                                       pm_message_t message)
 {
-       struct platform_device *pdev = to_platform_device(dev);
-       struct usb_hcd *hcd = dev_get_drvdata(dev);
+       struct usb_hcd *hcd = platform_get_drvdata(pdev);
+       struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+       unsigned long flags;
+       int rc;
 
        return 0;
+       rc = 0;
+
+       if (time_before(jiffies, ehci->next_statechange))
+               msleep(10);
+
+       /* Root hub was already suspended. Disable irq emission and
+        * mark HW unaccessible, bail out if RH has been resumed. Use
+        * the spinlock to properly synchronize with possible pending
+        * RH suspend or resume activity.
+        *
+        * This is still racy as hcd->state is manipulated outside of
+        * any locks =P But that will be a different fix.
+        */
+       spin_lock_irqsave(&ehci->lock, flags);
+       if (hcd->state != HC_STATE_SUSPENDED) {
+               rc = -EINVAL;
+               goto bail;
+       }
+       ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+       (void)ehci_readl(ehci, &ehci->regs->intr_enable);
+
+       /* make sure snapshot being resumed re-enumerates everything */
+       if (message.event == PM_EVENT_PRETHAW) {
+               ehci_halt(ehci);
+               ehci_reset(ehci);
+       }
+
+       clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+       au1xxx_stop_ehc();
+
+bail:
+       spin_unlock_irqrestore(&ehci->lock, flags);
+
+       // could save FLADJ in case of Vaux power loss
+       // ... we'd only use it to handle clock skew
+
+       return rc;
 }
-static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
+
+
+static int ehci_hcd_au1xxx_drv_resume(struct platform_device *pdev)
 {
-       struct platform_device *pdev = to_platform_device(dev);
-       struct usb_hcd *hcd = dev_get_drvdata(dev);
+       struct usb_hcd *hcd = platform_get_drvdata(pdev);
+       struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+       au1xxx_start_ehc();
+
+       // maybe restore FLADJ
+
+       if (time_before(jiffies, ehci->next_statechange))
+               msleep(100);
+
+       /* Mark hardware accessible again as we are out of D3 state by now */
+       set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+       /* If CF is still set, we maintained PCI Vaux power.
+        * Just undo the effect of ehci_pci_suspend().
+        */
+       if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+               int     mask = INTR_MASK;
+
+               if (!hcd->self.root_hub->do_remote_wakeup)
+                       mask &= ~STS_PCD;
+               ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+               ehci_readl(ehci, &ehci->regs->intr_enable);
+               return 0;
+       }
+
+       ehci_dbg(ehci, "lost power, restarting\n");
+       usb_root_hub_lost_power(hcd->self.root_hub);
+
+       /* Else reset, to cope with power loss or flush-to-storage
+        * style "resume" having let BIOS kick in during reboot.
+        */
+       (void) ehci_halt(ehci);
+       (void) ehci_reset(ehci);
+
+       /* emptying the schedule aborts any urbs */
+       spin_lock_irq(&ehci->lock);
+       if (ehci->reclaim)
+               end_unlink_async(ehci);
+       ehci_work(ehci);
+       spin_unlock_irq(&ehci->lock);
+
+       ehci_writel(ehci, ehci->command, &ehci->regs->command);
+       ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+       ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
+
+       /* here we "know" root ports should always stay powered */
+       ehci_port_power(ehci, 1);
+
+       hcd->state = HC_STATE_SUSPENDED;
 
        return 0;
 }
-*/
+
+#else
+#define ehci_hcd_au1xxx_drv_suspend NULL
+#define ehci_hcd_au1xxx_drv_resume NULL
+#endif
 
 static struct platform_driver ehci_hcd_au1xxx_driver = {
        .probe          = ehci_hcd_au1xxx_drv_probe,
        .remove         = ehci_hcd_au1xxx_drv_remove,
        .shutdown       = usb_hcd_platform_shutdown,
-       /*.suspend      = ehci_hcd_au1xxx_drv_suspend, */
-       /*.resume       = ehci_hcd_au1xxx_drv_resume, */
+       .suspend        = ehci_hcd_au1xxx_drv_suspend,
+       .resume         = ehci_hcd_au1xxx_drv_resume,
        .driver = {
                .name   = "au1xxx-ehci",
                .owner  = THIS_MODULE,
index 29c970ad487a6cda5af6c53f1938a60f1b9b15c0..c0948008fe3d17c068c47d83b768b2e7fc365bff 100644 (file)
@@ -248,27 +248,68 @@ static int ohci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
        return 0;
 }
 
-       /*TBD*/
-/*static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *dev)
+#ifdef CONFIG_PM
+static int ohci_hcd_au1xxx_drv_suspend(struct platform_device *pdev,
+                                       pm_message_t message)
 {
-       struct usb_hcd *hcd = platform_get_drvdata(dev);
+       struct usb_hcd *hcd = platform_get_drvdata(pdev);
+       struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+       unsigned long flags;
+       int rc;
+
+       rc = 0;
+
+       /* Root hub was already suspended. Disable irq emission and
+        * mark HW unaccessible, bail out if RH has been resumed. Use
+        * the spinlock to properly synchronize with possible pending
+        * RH suspend or resume activity.
+        *
+        * This is still racy as hcd->state is manipulated outside of
+        * any locks =P But that will be a different fix.
+        */
+       spin_lock_irqsave(&ohci->lock, flags);
+       if (hcd->state != HC_STATE_SUSPENDED) {
+               rc = -EINVAL;
+               goto bail;
+       }
+       ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
+       (void)ohci_readl(ohci, &ohci->regs->intrdisable);
 
-       return 0;
+       /* make sure snapshot being resumed re-enumerates everything */
+       if (message.event == PM_EVENT_PRETHAW)
+               ohci_usb_reset(ohci);
+
+       clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+       au1xxx_stop_ohc();
+bail:
+       spin_unlock_irqrestore(&ohci->lock, flags);
+
+       return rc;
 }
-static int ohci_hcd_au1xxx_drv_resume(struct platform_device *dev)
+
+static int ohci_hcd_au1xxx_drv_resume(struct platform_device *pdev)
 {
-       struct usb_hcd *hcd = platform_get_drvdata(dev);
+       struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+       au1xxx_start_ohc();
+
+       set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+       ohci_finish_controller_resume(hcd);
 
        return 0;
 }
-*/
+#else
+#define ohci_hcd_au1xxx_drv_suspend NULL
+#define ohci_hcd_au1xxx_drv_resume NULL
+#endif
 
 static struct platform_driver ohci_hcd_au1xxx_driver = {
        .probe          = ohci_hcd_au1xxx_drv_probe,
        .remove         = ohci_hcd_au1xxx_drv_remove,
        .shutdown       = usb_hcd_platform_shutdown,
-       /*.suspend      = ohci_hcd_au1xxx_drv_suspend, */
-       /*.resume       = ohci_hcd_au1xxx_drv_resume, */
+       .suspend        = ohci_hcd_au1xxx_drv_suspend,
+       .resume         = ohci_hcd_au1xxx_drv_resume,
        .driver         = {
                .name   = "au1xxx-ohci",
                .owner  = THIS_MODULE,