Kernel Version: 2.6.30
Contact: iss_storagedev@hp.com
Description: A symbolic link to /sys/block/cciss!cXdY
+
+Where: /sys/bus/pci/devices/<dev>/ccissX/rescan
+Date: August 2009
+Kernel Version: 2.6.31
+Contact: iss_storagedev@hp.com
+Description: Kicks of a rescan of the controller to discover logical
+ drive topology changes.
+
+Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date: August 2009
+Kernel Version: 2.6.31
+Contact: iss_storagedev@hp.com
+Description: Displays the 8-byte LUN ID used to address logical
+ drive Y of controller X.
+
+Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date: August 2009
+Kernel Version: 2.6.31
+Contact: iss_storagedev@hp.com
+Description: Displays the RAID level of logical drive Y of
+ controller X.
+
+Where: /sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date: August 2009
+Kernel Version: 2.6.31
+Contact: iss_storagedev@hp.com
+Description: Displays the usage count (number of opens) of logical drive Y
+ of controller X.
+++ /dev/null
-What: /sys/class/usb_host/usb_hostN/wusb_chid
-Date: July 2008
-KernelVersion: 2.6.27
-Contact: David Vrabel <david.vrabel@csr.com>
-Description:
- Write the CHID (16 space-separated hex octets) for this host controller.
- This starts the host controller, allowing it to accept connection from
- WUSB devices.
-
- Set an all zero CHID to stop the host controller.
-
-What: /sys/class/usb_host/usb_hostN/wusb_trust_timeout
-Date: July 2008
-KernelVersion: 2.6.27
-Contact: David Vrabel <david.vrabel@csr.com>
-Description:
- Devices that haven't sent a WUSB packet to the host
- within 'wusb_trust_timeout' ms are considered to have
- disconnected and are removed. The default value of
- 4000 ms is the value required by the WUSB
- specification.
-
- Since this relates to security (specifically, the
- lifetime of PTKs and GTKs) it should not be changed
- from the default.
--- /dev/null
+What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
+Date: July 2008
+KernelVersion: 2.6.27
+Contact: David Vrabel <david.vrabel@csr.com>
+Description:
+ Write the CHID (16 space-separated hex octets) for this host controller.
+ This starts the host controller, allowing it to accept connection from
+ WUSB devices.
+
+ Set an all zero CHID to stop the host controller.
+
+What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
+Date: July 2008
+KernelVersion: 2.6.27
+Contact: David Vrabel <david.vrabel@csr.com>
+Description:
+ Devices that haven't sent a WUSB packet to the host
+ within 'wusb_trust_timeout' ms are considered to have
+ disconnected and are removed. The default value of
+ 4000 ms is the value required by the WUSB
+ specification.
+
+ Since this relates to security (specifically, the
+ lifetime of PTKs and GTKs) it should not be changed
+ from the default.
+++ /dev/null
-What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
-Date: August 2008
-KernelVersion: 2.6.27
-Contact: mark.langsdorf@amd.com
-Description: These files exist in every cpu's cache index directories.
- There are currently 2 cache_disable_# files in each
- directory. Reading from these files on a supported
- processor will return that cache disable index value
- for that processor and node. Writing to one of these
- files will cause the specificed cache index to be disabled.
-
- Currently, only AMD Family 10h Processors support cache index
- disable, and only for their L3 caches. See the BIOS and
- Kernel Developer's Guide at
- http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
- for formatting information and other details on the
- cache index disable.
-Users: joachim.deguara@amd.com
--- /dev/null
+What: /sys/devices/system/cpu/
+Date: pre-git history
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+ A collection of both global and individual CPU attributes
+
+ Individual CPU attributes are contained in subdirectories
+ named by the kernel's logical CPU number, e.g.:
+
+ /sys/devices/system/cpu/cpu#/
+
+What: /sys/devices/system/cpu/sched_mc_power_savings
+ /sys/devices/system/cpu/sched_smt_power_savings
+Date: June 2006
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description: Discover and adjust the kernel's multi-core scheduler support.
+
+ Possible values are:
+
+ 0 - No power saving load balance (default value)
+ 1 - Fill one thread/core/package first for long running threads
+ 2 - Also bias task wakeups to semi-idle cpu package for power
+ savings
+
+ sched_mc_power_savings is dependent upon SCHED_MC, which is
+ itself architecture dependent.
+
+ sched_smt_power_savings is dependent upon SCHED_SMT, which
+ is itself architecture dependent.
+
+ The two files are independent of each other. It is possible
+ that one file may be present without the other.
+
+ Introduced by git commit 5c45bf27.
+
+
+What: /sys/devices/system/cpu/kernel_max
+ /sys/devices/system/cpu/offline
+ /sys/devices/system/cpu/online
+ /sys/devices/system/cpu/possible
+ /sys/devices/system/cpu/present
+Date: December 2008
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description: CPU topology files that describe kernel limits related to
+ hotplug. Briefly:
+
+ kernel_max: the maximum cpu index allowed by the kernel
+ configuration.
+
+ offline: cpus that are not online because they have been
+ HOTPLUGGED off or exceed the limit of cpus allowed by the
+ kernel configuration (kernel_max above).
+
+ online: cpus that are online and being scheduled.
+
+ possible: cpus that have been allocated resources and can be
+ brought online if they are present.
+
+ present: cpus that have been identified as being present in
+ the system.
+
+ See Documentation/cputopology.txt for more information.
+
+
+
+What: /sys/devices/system/cpu/cpu#/node
+Date: October 2009
+Contact: Linux memory management mailing list <linux-mm@kvack.org>
+Description: Discover NUMA node a CPU belongs to
+
+ When CONFIG_NUMA is enabled, a symbolic link that points
+ to the corresponding NUMA node directory.
+
+ For example, the following symlink is created for cpu42
+ in NUMA node 2:
+
+ /sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
+
+What: /sys/devices/system/cpu/cpu#/topology/core_id
+ /sys/devices/system/cpu/cpu#/topology/core_siblings
+ /sys/devices/system/cpu/cpu#/topology/core_siblings_list
+ /sys/devices/system/cpu/cpu#/topology/physical_package_id
+ /sys/devices/system/cpu/cpu#/topology/thread_siblings
+ /sys/devices/system/cpu/cpu#/topology/thread_siblings_list
+Date: December 2008
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description: CPU topology files that describe a logical CPU's relationship
+ to other cores and threads in the same physical package.
+
+ One cpu# directory is created per logical CPU in the system,
+ e.g. /sys/devices/system/cpu/cpu42/.
+
+ Briefly, the files above are:
+
+ core_id: the CPU core ID of cpu#. Typically it is the
+ hardware platform's identifier (rather than the kernel's).
+ The actual value is architecture and platform dependent.
+
+ core_siblings: internal kernel map of cpu#'s hardware threads
+ within the same physical_package_id.
+
+ core_siblings_list: human-readable list of the logical CPU
+ numbers within the same physical_package_id as cpu#.
+
+ physical_package_id: physical package id of cpu#. Typically
+ corresponds to a physical socket number, but the actual value
+ is architecture and platform dependent.
+
+ thread_siblings: internel kernel map of cpu#'s hardware
+ threads within the same core as cpu#
+
+ thread_siblings_list: human-readable list of cpu#'s hardware
+ threads within the same core as cpu#
+
+ See Documentation/cputopology.txt for more information.
+
+
+What: /sys/devices/system/cpu/cpuidle/current_driver
+ /sys/devices/system/cpu/cpuidle/current_governer_ro
+Date: September 2007
+Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description: Discover cpuidle policy and mechanism
+
+ Various CPUs today support multiple idle levels that are
+ differentiated by varying exit latencies and power
+ consumption during idle.
+
+ Idle policy (governor) is differentiated from idle mechanism
+ (driver)
+
+ current_driver: displays current idle mechanism
+
+ current_governor_ro: displays current idle policy
+
+ See files in Documentation/cpuidle/ for more information.
+
+
+What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date: August 2008
+KernelVersion: 2.6.27
+Contact: mark.langsdorf@amd.com
+Description: These files exist in every cpu's cache index directories.
+ There are currently 2 cache_disable_# files in each
+ directory. Reading from these files on a supported
+ processor will return that cache disable index value
+ for that processor and node. Writing to one of these
+ files will cause the specificed cache index to be disabled.
+
+ Currently, only AMD Family 10h Processors support cache index
+ disable, and only for their L3 caches. See the BIOS and
+ Kernel Developer's Guide at
+ http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+ for formatting information and other details on the
+ cache index disable.
+Users: joachim.deguara@amd.com
When sending patches to Linus, always follow step #7.
Large changes are not appropriate for mailing lists, and some
-maintainers. If your patch, uncompressed, exceeds 40 kB in size,
+maintainers. If your patch, uncompressed, exceeds 300 kB in size,
it is preferred that you store your patch on an Internet-accessible
server, and provide instead a URL (link) pointing to your patch.
--- /dev/null
+ARM TCM (Tightly-Coupled Memory) handling in Linux
+----
+Written by Linus Walleij <linus.walleij@stericsson.com>
+
+Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory).
+This is usually just a few (4-64) KiB of RAM inside the ARM
+processor.
+
+Due to being embedded inside the CPU The TCM has a
+Harvard-architecture, so there is an ITCM (instruction TCM)
+and a DTCM (data TCM). The DTCM can not contain any
+instructions, but the ITCM can actually contain data.
+The size of DTCM or ITCM is minimum 4KiB so the typical
+minimum configuration is 4KiB ITCM and 4KiB DTCM.
+
+ARM CPU:s have special registers to read out status, physical
+location and size of TCM memories. arch/arm/include/asm/cputype.h
+defines a CPUID_TCM register that you can read out from the
+system control coprocessor. Documentation from ARM can be found
+at http://infocenter.arm.com, search for "TCM Status Register"
+to see documents for all CPUs. Reading this register you can
+determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
+machine.
+
+There is further a TCM region register (search for "TCM Region
+Registers" at the ARM site) that can report and modify the location
+size of TCM memories at runtime. This is used to read out and modify
+TCM location and size. Notice that this is not a MMU table: you
+actually move the physical location of the TCM around. At the
+place you put it, it will mask any underlying RAM from the
+CPU so it is usually wise not to overlap any physical RAM with
+the TCM.
+
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM if often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the machine.
+
+TCM is used for a few things:
+
+- FIQ and other interrupt handlers that need deterministic
+ timing and cannot wait for cache misses.
+
+- Idle loops where all external RAM is set to self-refresh
+ retention mode, so only on-chip RAM is accessible by
+ the CPU and then we hang inside ITCM waiting for an
+ interrupt.
+
+- Other operations which implies shutting off or reconfiguring
+ the external RAM controller.
+
+There is an interface for using TCM on the ARM architecture
+in <asm/tcm.h>. Using this interface it is possible to:
+
+- Define the physical address and size of ITCM and DTCM.
+
+- Tag functions to be compiled into ITCM.
+
+- Tag data and constants to be allocated to DTCM and ITCM.
+
+- Have the remaining TCM RAM added to a special
+ allocation pool with gen_pool_create() and gen_pool_add()
+ and provice tcm_alloc() and tcm_free() for this
+ memory. Such a heap is great for things like saving
+ device state when shutting off device power domains.
+
+A machine that has TCM memory shall select HAVE_TCM in
+arch/arm/Kconfig for itself, and then the
+rest of the functionality will depend on the physical
+location and size of ITCM and DTCM to be defined in
+mach/memory.h for the machine. Code that needs to use
+TCM shall #include <asm/tcm.h> If the TCM is not located
+at the place given in memory.h it will be moved using
+the TCM Region registers.
+
+Functions to go into itcm can be tagged like this:
+int __tcmfunc foo(int bar);
+
+Variables to go into dtcm can be tagged like this:
+int __tcmdata foo;
+
+Constants can be tagged like this:
+int __tcmconst foo;
+
+To put assembler into TCM just use
+.section ".tcm.text" or .section ".tcm.data"
+respectively.
+
+Example code:
+
+#include <asm/tcm.h>
+
+/* Uninitialized data */
+static u32 __tcmdata tcmvar;
+/* Initialized data */
+static u32 __tcmdata tcmassigned = 0x2BADBABEU;
+/* Constant */
+static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
+
+static void __tcmlocalfunc tcm_to_tcm(void)
+{
+ int i;
+ for (i = 0; i < 100; i++)
+ tcmvar ++;
+}
+
+static void __tcmfunc hello_tcm(void)
+{
+ /* Some abstract code that runs in ITCM */
+ int i;
+ for (i = 0; i < 100; i++) {
+ tcmvar ++;
+ }
+ tcm_to_tcm();
+}
+
+static void __init test_tcm(void)
+{
+ u32 *tcmem;
+ int i;
+
+ hello_tcm();
+ printk("Hello TCM executed from ITCM RAM\n");
+
+ printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
+ tcmvar = 0xDEADBEEFU;
+ printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
+
+ printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
+
+ printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
+
+ /* Allocate some TCM memory from the pool */
+ tcmem = tcm_alloc(20);
+ if (tcmem) {
+ printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
+ tcmem[0] = 0xDEADBEEFU;
+ tcmem[1] = 0x2BADBABEU;
+ tcmem[2] = 0xCAFEBABEU;
+ tcmem[3] = 0xDEADBEEFU;
+ tcmem[4] = 0x2BADBABEU;
+ for (i = 0; i < 5; i++)
+ printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
+ tcm_free(tcmem, 20);
+ }
+}
*/
#include <stdio.h>
-#include <string.h>
#define EXAMPLES 6
Each cgroup is represented by a directory in the cgroup file system
containing the following files describing that cgroup:
- - tasks: list of tasks (by pid) attached to that cgroup
+ - tasks: list of tasks (by pid) attached to that cgroup. This list
+ is not guaranteed to be sorted. Writing a thread id into this file
+ moves the thread into this cgroup.
+ - cgroup.procs: list of tgids in the cgroup. This list is not
+ guaranteed to be sorted or free of duplicate tgids, and userspace
+ should sort/uniquify the list if this property is required.
+ Writing a tgid into this file moves all threads with that tgid into
+ this cgroup.
- notify_on_release flag: run the release agent on exit?
- release_agent: the path to use for release notifications (this file
exists in the top cgroup only)
In this directory you can find several files:
# ls
-notify_on_release tasks
+cgroup.procs notify_on_release tasks
(plus whatever files added by the attached subsystems)
Now attach your shell to this cgroup:
# echo 0 > tasks
+2.3 Mounting hierarchies by name
+--------------------------------
+
+Passing the name=<x> option when mounting a cgroups hierarchy
+associates the given name with the hierarchy. This can be used when
+mounting a pre-existing hierarchy, in order to refer to it by name
+rather than by its set of active subsystems. Each hierarchy is either
+nameless, or has a unique name.
+
+The name should match [\w.-]+
+
+When passing a name=<x> option for a new hierarchy, you need to
+specify subsystems manually; the legacy behaviour of mounting all
+subsystems when none are explicitly specified is not supported when
+you give a subsystem a name.
+
+The name of the subsystem appears as part of the hierarchy description
+in /proc/mounts and /proc/<pid>/cgroups.
+
+
3. Kernel API
=============
called multiple times against a cgroup.
int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct task_struct *task)
+ struct task_struct *task, bool threadgroup)
(cgroup_mutex held by caller)
Called prior to moving a task into a cgroup; if the subsystem
task is passed, then a successful result indicates that *any*
unspecified task can be moved into the cgroup. Note that this isn't
called on a fork. If this method returns 0 (success) then this should
-remain valid while the caller holds cgroup_mutex.
+remain valid while the caller holds cgroup_mutex. If threadgroup is
+true, then a successful result indicates that all threads in the given
+thread's threadgroup can be moved together.
void attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct cgroup *old_cgrp, struct task_struct *task)
+ struct cgroup *old_cgrp, struct task_struct *task,
+ bool threadgroup)
(cgroup_mutex held by caller)
Called after the task has been attached to the cgroup, to allow any
post-attachment activity that requires memory allocations or blocking.
+If threadgroup is true, the subsystem should take care of all threads
+in the specified thread's threadgroup. Currently does not support any
+subsystem that might need the old_cgrp for every thread in the group.
void fork(struct cgroup_subsy *ss, struct task_struct *task)
pages that are selected for reclaiming come from the per cgroup LRU
list.
+NOTE: Reclaim does not work for the root cgroup, since we cannot set any
+limits on the root cgroup.
+
2. Locking
The memory controller uses the following hierarchy
NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo,
mega or gigabytes.
NOTE: We can write "-1" to reset the *.limit_in_bytes(unlimited).
+NOTE: We cannot set limits on the root cgroup any more.
# cat /cgroups/0/memory.limit_in_bytes
4194304
NOTE2: This feature can be enabled/disabled per subtree.
-7. TODO
+7. Soft limits
+
+Soft limits allow for greater sharing of memory. The idea behind soft limits
+is to allow control groups to use as much of the memory as needed, provided
+
+a. There is no memory contention
+b. They do not exceed their hard limit
+
+When the system detects memory contention or low memory control groups
+are pushed back to their soft limits. If the soft limit of each control
+group is very high, they are pushed back as much as possible to make
+sure that one control group does not starve the others of memory.
+
+Please note that soft limits is a best effort feature, it comes with
+no guarantees, but it does its best to make sure that when memory is
+heavily contended for, memory is allocated based on the soft limit
+hints/setup. Currently soft limit based reclaim is setup such that
+it gets invoked from balance_pgdat (kswapd).
+
+7.1 Interface
+
+Soft limits can be setup by using the following commands (in this example we
+assume a soft limit of 256 megabytes)
+
+# echo 256M > memory.soft_limit_in_bytes
+
+If we want to change this to 1G, we can at any time use
+
+# echo 1G > memory.soft_limit_in_bytes
+
+NOTE1: Soft limits take effect over a long period of time, since they involve
+ reclaiming memory for balancing between memory cgroups
+NOTE2: It is recommended to set the soft limit always below the hard limit,
+ otherwise the hard limit will take precedence.
+
+8. TODO
1. Add support for accounting huge pages (as a separate controller)
2. Make per-cgroup scanner reclaim not-shared pages first
static struct sock *nls;
static struct timer_list cn_test_timer;
-static void cn_test_callback(struct cn_msg *msg)
+static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
__func__, jiffies, msg->id.idx, msg->id.val,
netlink based networking for inter-process communication in a significantly
easier way:
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
struct cb_id
Connector interfaces.
/*****************************************/
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
Registers new callback with connector core.
struct cb_id *id - unique connector's user identifier.
It must be registered in connector.h for legal in-kernel users.
char *name - connector's callback symbolic name.
- void (*callback) (void *) - connector's callback.
- Argument must be dereferenced to struct cn_msg *.
+ void (*callback) (struct cn..) - connector's callback.
+ cn_msg and the sender's credentials
void cn_del_callback(struct cb_id *id);
-Export cpu topology info via sysfs. Items (attributes) are similar
+Export CPU topology info via sysfs. Items (attributes) are similar
to /proc/cpuinfo.
1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
-represent the physical package id of cpu X;
+
+ physical package id of cpuX. Typically corresponds to a physical
+ socket number, but the actual value is architecture and platform
+ dependent.
+
2) /sys/devices/system/cpu/cpuX/topology/core_id:
-represent the cpu core id to cpu X;
+
+ the CPU core ID of cpuX. Typically it is the hardware platform's
+ identifier (rather than the kernel's). The actual value is
+ architecture and platform dependent.
+
3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
-represent the thread siblings to cpu X in the same core;
+
+ internel kernel map of cpuX's hardware threads within the same
+ core as cpuX
+
4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
-represent the thread siblings to cpu X in the same physical package;
+
+ internal kernel map of cpuX's hardware threads within the same
+ physical_package_id.
To implement it in an architecture-neutral way, a new source file,
drivers/base/topology.c, is to export the 4 attributes.
3) thread_siblings: just the given CPU
4) core_siblings: just the given CPU
-Additionally, cpu topology information is provided under
+Additionally, CPU topology information is provided under
/sys/devices/system/cpu and includes these files. The internal
source for the output is in brackets ("[]").
- kernel_max: the maximum cpu index allowed by the kernel configuration.
+ kernel_max: the maximum CPU index allowed by the kernel configuration.
[NR_CPUS-1]
- offline: cpus that are not online because they have been
+ offline: CPUs that are not online because they have been
HOTPLUGGED off (see cpu-hotplug.txt) or exceed the limit
- of cpus allowed by the kernel configuration (kernel_max
+ of CPUs allowed by the kernel configuration (kernel_max
above). [~cpu_online_mask + cpus >= NR_CPUS]
- online: cpus that are online and being scheduled [cpu_online_mask]
+ online: CPUs that are online and being scheduled [cpu_online_mask]
- possible: cpus that have been allocated resources and can be
+ possible: CPUs that have been allocated resources and can be
brought online if they are present. [cpu_possible_mask]
- present: cpus that have been identified as being present in the
+ present: CPUs that have been identified as being present in the
system. [cpu_present_mask]
The format for the above output is compatible with cpulist_parse()
[see <linux/cpumask.h>]. Some examples follow.
-In this example, there are 64 cpus in the system but cpus 32-63 exceed
+In this example, there are 64 CPUs in the system but cpus 32-63 exceed
the kernel max which is limited to 0..31 by the NR_CPUS config option
-being 32. Note also that cpus 2 and 4-31 are not online but could be
+being 32. Note also that CPUs 2 and 4-31 are not online but could be
brought online as they are both present and possible.
kernel_max: 31
present: 0-31
In this example, the NR_CPUS config option is 128, but the kernel was
-started with possible_cpus=144. There are 4 cpus in the system and cpu2
-was manually taken offline (and is the only cpu that can be brought
+started with possible_cpus=144. There are 4 CPUs in the system and cpu2
+was manually taken offline (and is the only CPU that can be brought
online.)
kernel_max: 127
present: 0-3
See cpu-hotplug.txt for the possible_cpus=NUM kernel start parameter
-as well as more information on the various cpumask's.
+as well as more information on the various cpumasks.
3.1 General format of the API:
struct dma_async_tx_descriptor *
-async_<operation>(<op specific parameters>,
- enum async_tx_flags flags,
- struct dma_async_tx_descriptor *dependency,
- dma_async_tx_callback callback_routine,
- void *callback_parameter);
+async_<operation>(<op specific parameters>, struct async_submit ctl *submit)
3.2 Supported operations:
-memcpy - memory copy between a source and a destination buffer
-memset - fill a destination buffer with a byte value
-xor - xor a series of source buffers and write the result to a
- destination buffer
-xor_zero_sum - xor a series of source buffers and set a flag if the
- result is zero. The implementation attempts to prevent
- writes to memory
+memcpy - memory copy between a source and a destination buffer
+memset - fill a destination buffer with a byte value
+xor - xor a series of source buffers and write the result to a
+ destination buffer
+xor_val - xor a series of source buffers and set a flag if the
+ result is zero. The implementation attempts to prevent
+ writes to memory
+pq - generate the p+q (raid6 syndrome) from a series of source buffers
+pq_val - validate that a p and or q buffer are in sync with a given series of
+ sources
+datap - (raid6_datap_recov) recover a raid6 data block and the p block
+ from the given sources
+2data - (raid6_2data_recov) recover 2 raid6 data blocks from the given
+ sources
3.3 Descriptor management:
The return value is non-NULL and points to a 'descriptor' when the operation
recycle (or free) the descriptor. A descriptor can be acked by one of the
following methods:
1/ setting the ASYNC_TX_ACK flag if no child operations are to be submitted
-2/ setting the ASYNC_TX_DEP_ACK flag to acknowledge the parent
- descriptor of a new operation.
+2/ submitting an unacknowledged descriptor as a dependency to another
+ async_tx call will implicitly set the acknowledged state.
3/ calling async_tx_ack() on the descriptor.
3.4 When does the operation execute?
Perform a xor->copy->xor operation where each operation depends on the
result from the previous operation:
-void complete_xor_copy_xor(void *param)
+void callback(void *param)
{
- printk("complete\n");
+ struct completion *cmp = param;
+
+ complete(cmp);
}
-int run_xor_copy_xor(struct page **xor_srcs,
- int xor_src_cnt,
- struct page *xor_dest,
- size_t xor_len,
- struct page *copy_src,
- struct page *copy_dest,
- size_t copy_len)
+void run_xor_copy_xor(struct page **xor_srcs,
+ int xor_src_cnt,
+ struct page *xor_dest,
+ size_t xor_len,
+ struct page *copy_src,
+ struct page *copy_dest,
+ size_t copy_len)
{
struct dma_async_tx_descriptor *tx;
+ addr_conv_t addr_conv[xor_src_cnt];
+ struct async_submit_ctl submit;
+ addr_conv_t addr_conv[NDISKS];
+ struct completion cmp;
+
+ init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL,
+ addr_conv);
+ tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit)
- tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
- ASYNC_TX_XOR_DROP_DST, NULL, NULL, NULL);
- tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len,
- ASYNC_TX_DEP_ACK, tx, NULL, NULL);
- tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len,
- ASYNC_TX_XOR_DROP_DST | ASYNC_TX_DEP_ACK | ASYNC_TX_ACK,
- tx, complete_xor_copy_xor, NULL);
+ submit->depend_tx = tx;
+ tx = async_memcpy(copy_dest, copy_src, 0, 0, copy_len, &submit);
+
+ init_completion(&cmp);
+ init_async_submit(&submit, ASYNC_TX_XOR_DROP_DST | ASYNC_TX_ACK, tx,
+ callback, &cmp, addr_conv);
+ tx = async_xor(xor_dest, xor_srcs, 0, xor_src_cnt, xor_len, &submit);
async_tx_issue_pending_all();
+
+ wait_for_completion(&cmp);
}
See include/linux/async_tx.h for more information on the flags. See the
Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
from 32-bit firescope and vice versa:
-- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
+- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
and he implemented fast system dump (alpha version - read README.txt):
-- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
+- http://halobates.de/firewire/firedump-0.1.tar.bz2
There is also a gdb proxy for firewire which allows to use gdb to access
data which can be referenced from symbols found by gdb in vmlinux:
-- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
+- http://halobates.de/firewire/fireproxy-0.33.tar.bz2
The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
yet stable) with kgdb over an memory-based communication module (kgdbom).
Notes
-----
-Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
+Documentation and specifications: http://halobates.de/firewire/
FireWire is a trademark of Apple Inc. - for more information please refer to:
http://en.wikipedia.org/wiki/FireWire
---------------------------
-What: fscher and fscpos drivers
-When: June 2009
-Why: Deprecated by the new fschmd driver.
-Who: Hans de Goede <hdegoede@redhat.com>
- Jean Delvare <khali@linux-fr.org>
-
----------------------------
-
What: sysfs ui for changing p4-clockmod parameters
When: September 2009
Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
Why: Should be implemented in userspace, policy daemon.
Who: Johannes Berg <johannes@sipsolutions.net>
+---------------------------
+
+What: CONFIG_INOTIFY
+When: 2.6.33
+Why: last user (audit) will be converted to the newer more generic
+ and more easily maintained fsnotify subsystem
+Who: Eric Paris <eparis@redhat.com>
+
----------------------------
What: lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
will also allow making ALSA OSS emulation independent of
sound_core. The dependency will be broken then too.
Who: Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What: Support for VMware's guest paravirtuliazation technique [VMI] will be
+ dropped.
+When: 2.6.37 or earlier.
+Why: With the recent innovations in CPU hardware acceleration technologies
+ from Intel and AMD, VMware ran a few experiments to compare these
+ techniques to guest paravirtualization technique on VMware's platform.
+ These hardware assisted virtualization techniques have outperformed the
+ performance benefits provided by VMI in most of the workloads. VMware
+ expects that these hardware features will be ubiquitous in a couple of
+ years, as a result, VMware has started a phased retirement of this
+ feature from the hypervisor. We will be removing this feature from the
+ Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+ technical reasons (read opportunity to remove major chunk of pvops)
+ arise.
+
+ Please note that VMI has always been an optimization and non-VMI kernels
+ still work fine on VMware's platform.
+ Latest versions of VMware's product which support VMI are,
+ Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+ releases for these products will continue supporting VMI.
+
+ For more details about VMI retirement take a look at this,
+ http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who: Alok N Kataria <akataria@vmware.com>
+
+----------------------------
Other applications are described in the following papers:
* XCPU & Clustering
- http://www.xcpu.org/xcpu-talk.pdf
+ http://xcpu.org/papers/xcpu-talk.pdf
* KVMFS: control file system for KVM
- http://www.xcpu.org/kvmfs.pdf
- * CellFS: A New ProgrammingModel for the Cell BE
- http://www.xcpu.org/cellfs-talk.pdf
+ http://xcpu.org/papers/kvmfs.pdf
+ * CellFS: A New Programming Model for the Cell BE
+ http://xcpu.org/papers/cellfs-talk.pdf
* PROSE I/O: Using 9p to enable Application Partitions
http://plan9.escet.urjc.es/iwp9/cready/PROSE_iwp9_2006.pdf
(see rfdno and wfdno)
virtio - connect to the next virtio channel available
(from lguest or KVM with trans_virtio module)
+ rdma - connect to a specified RDMA channel
uname=name user name to attempt mount as on the remote server. The
server may override or ignore this value. Certain user
cache=mode specifies a caching policy. By default, no caches are used.
loose = no attempts are made at consistency,
intended for exclusive, read-only mounts
+ fscache = use FS-Cache for a persistent, read-only
+ cache backend.
debug=n specifies debug level. The debug level is a bitmask.
- 0x01 = display verbose error messages
- 0x02 = developer debug (DEBUG_CURRENT)
- 0x04 = display 9p trace
- 0x08 = display VFS trace
- 0x10 = display Marshalling debug
- 0x20 = display RPC debug
- 0x40 = display transport debug
- 0x80 = display allocation debug
+ 0x01 = display verbose error messages
+ 0x02 = developer debug (DEBUG_CURRENT)
+ 0x04 = display 9p trace
+ 0x08 = display VFS trace
+ 0x10 = display Marshalling debug
+ 0x20 = display RPC debug
+ 0x40 = display transport debug
+ 0x80 = display allocation debug
+ 0x100 = display protocol message debug
+ 0x200 = display Fid debug
+ 0x400 = display packet debug
+ 0x800 = display fscache tracing debug
rfdno=n the file descriptor for reading with trans=fd
any = v9fs does single attach and performs all
operations as one user
+ cachetag cache tag to use the specified persistent cache.
+ cache tags for existing cache sessions can be listed at
+ /sys/fs/9p/caches. (applies only to cache=fscache)
+
RESOURCES
=========
A Linux version of the 9p server is now maintained under the npfs project
on sourceforge (http://sourceforge.net/projects/npfs). The currently
maintained version is the single-threaded version of the server (named spfs)
-available from the same CVS repository.
+available from the same SVN repository.
There are user and developer mailing lists available through the v9fs project
on sourceforge (http://sourceforge.net/projects/v9fs).
A stand-alone version of the module (which should build for any 2.6 kernel)
is available via (http://github.com/ericvh/9p-sac/tree/master)
-News and other information is maintained on SWiK (http://swik.net/v9fs).
+News and other information is maintained on SWiK (http://swik.net/v9fs)
+and the Wiki (http://sf.net/apps/mediawiki/v9fs/index.php).
Bug reports may be issued through the kernel.org bugzilla
(http://bugzilla.kernel.org)
sb=n Use alternate superblock at this location.
-quota
-noquota
-grpquota
-usrquota
+quota These options are ignored by the filesystem. They
+noquota are used only by quota tools to recognize volumes
+grpquota where quota should be turned on. See documentation
+usrquota in the quota-tools package for more details
+ (http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type> These options tell filesystem details about quota
+usrjquota=<file> so that quota information can be properly updated
+grpjquota=<file> during journal replay. They replace the above
+ quota options. See documentation in the quota-tools
+ package for more details
+ (http://sourceforge.net/projects/linuxquota).
bh (*) ext3 associates buffer heads to data pages to
nobh (a) cache disk block mapping information
mount options "ro,noload" can be used to prevent
writes to the filesystem.
+journal_checksum Enable checksumming of the journal transactions.
+ This will allow the recovery code in e2fsck and the
+ kernel to detect corruption in the kernel. It is a
+ compatible change and will be ignored by older kernels.
+
journal_async_commit Commit block can be written to disk without waiting
for descriptor blocks. If enabled older kernels cannot
- mount the device.
+ mount the device. This will enable 'journal_checksum'
+ internally.
journal=update Update the ext4 file system's journal to the current
format.
to use for allocation size and alignment. For RAID5/6
systems this should be the number of data
disks * RAID chunk size in file system blocks.
-delalloc (*) Deferring block allocation until write-out time.
-nodelalloc Disable delayed allocation. Blocks are allocation
- when data is copied from user to page cache.
+
+delalloc (*) Defer block allocation until just before ext4
+ writes out the block(s) in question. This
+ allows ext4 to better allocation decisions
+ more efficiently.
+nodelalloc Disable delayed allocation. Blocks are allocated
+ when the data is copied from userspace to the
+ page cache, either via the write(2) system call
+ or when an mmap'ed page which was previously
+ unallocated is written for the first time.
max_batch_time=usec Maximum amount of time ext4 should wait for
additional filesystem operations to be batch
..............................................................................
File Content
mb_groups details of multiblock allocator buddy cache of free blocks
- mb_history multiblock allocation history
..............................................................................
Contents:
1) Overview
2) Features
- 3) smount command
+ 3) Setting mount states
4) Use-case
5) Detailed semantics
6) Quiz
Here is an example:
- Lets say /mnt has a mount that is shared.
+ Let's say /mnt has a mount that is shared.
mount --make-shared /mnt
- note: mount command does not yet support the --make-shared flag.
- I have included a small C program which does the same by executing
- 'smount /mnt shared'
+ Note: mount(8) command now supports the --make-shared flag,
+ so the sample 'smount' program is no longer needed and has been
+ removed.
- #mount --bind /mnt /tmp
+ # mount --bind /mnt /tmp
The above command replicates the mount at /mnt to the mountpoint /tmp
and the contents of both the mounts remain identical.
#ls /tmp
a b c
- Now lets say we mount a device at /tmp/a
- #mount /dev/sd0 /tmp/a
+ Now let's say we mount a device at /tmp/a
+ # mount /dev/sd0 /tmp/a
#ls /tmp/a
t1 t2 t2
Here is an example:
- Lets say /mnt has a mount which is shared.
- #mount --make-shared /mnt
+ Let's say /mnt has a mount which is shared.
+ # mount --make-shared /mnt
- Lets bind mount /mnt to /tmp
- #mount --bind /mnt /tmp
+ Let's bind mount /mnt to /tmp
+ # mount --bind /mnt /tmp
the new mount at /tmp becomes a shared mount and it is a replica of
the mount at /mnt.
- Now lets make the mount at /tmp; a slave of /mnt
- #mount --make-slave /tmp
- [or smount /tmp slave]
+ Now let's make the mount at /tmp; a slave of /mnt
+ # mount --make-slave /tmp
- lets mount /dev/sd0 on /mnt/a
- #mount /dev/sd0 /mnt/a
+ let's mount /dev/sd0 on /mnt/a
+ # mount /dev/sd0 /mnt/a
#ls /mnt/a
t1 t2 t3
Note the mount event has propagated to the mount at /tmp
- However lets see what happens if we mount something on the mount at /tmp
+ However let's see what happens if we mount something on the mount at /tmp
- #mount /dev/sd1 /tmp/b
+ # mount /dev/sd1 /tmp/b
#ls /tmp/b
s1 s2 s3
2d) A unbindable mount is a unbindable private mount
- lets say we have a mount at /mnt and we make is unbindable
+ let's say we have a mount at /mnt and we make is unbindable
- #mount --make-unbindable /mnt
- [ smount /mnt unbindable ]
+ # mount --make-unbindable /mnt
- Lets try to bind mount this mount somewhere else.
+ Let's try to bind mount this mount somewhere else.
# mount --bind /mnt /tmp
mount: wrong fs type, bad option, bad superblock on /mnt,
or too many mounted file systems
Binding a unbindable mount is a invalid operation.
-3) smount command
+3) Setting mount states
- Currently the mount command is not aware of shared subtree features.
- Work is in progress to add the support in mount ( util-linux package ).
- Till then use the following program.
+ The mount command (util-linux package) can be used to set mount
+ states:
- ------------------------------------------------------------------------
- //
- //this code was developed my Miklos Szeredi <miklos@szeredi.hu>
- //and modified by Ram Pai <linuxram@us.ibm.com>
- // sample usage:
- // smount /tmp shared
- //
- #include <stdio.h>
- #include <stdlib.h>
- #include <unistd.h>
- #include <string.h>
- #include <sys/mount.h>
- #include <sys/fsuid.h>
-
- #ifndef MS_REC
- #define MS_REC 0x4000 /* 16384: Recursive loopback */
- #endif
-
- #ifndef MS_SHARED
- #define MS_SHARED 1<<20 /* Shared */
- #endif
-
- #ifndef MS_PRIVATE
- #define MS_PRIVATE 1<<18 /* Private */
- #endif
-
- #ifndef MS_SLAVE
- #define MS_SLAVE 1<<19 /* Slave */
- #endif
-
- #ifndef MS_UNBINDABLE
- #define MS_UNBINDABLE 1<<17 /* Unbindable */
- #endif
-
- int main(int argc, char *argv[])
- {
- int type;
- if(argc != 3) {
- fprintf(stderr, "usage: %s dir "
- "<rshared|rslave|rprivate|runbindable|shared|slave"
- "|private|unbindable>\n" , argv[0]);
- return 1;
- }
-
- fprintf(stdout, "%s %s %s\n", argv[0], argv[1], argv[2]);
-
- if (strcmp(argv[2],"rshared")==0)
- type=(MS_SHARED|MS_REC);
- else if (strcmp(argv[2],"rslave")==0)
- type=(MS_SLAVE|MS_REC);
- else if (strcmp(argv[2],"rprivate")==0)
- type=(MS_PRIVATE|MS_REC);
- else if (strcmp(argv[2],"runbindable")==0)
- type=(MS_UNBINDABLE|MS_REC);
- else if (strcmp(argv[2],"shared")==0)
- type=MS_SHARED;
- else if (strcmp(argv[2],"slave")==0)
- type=MS_SLAVE;
- else if (strcmp(argv[2],"private")==0)
- type=MS_PRIVATE;
- else if (strcmp(argv[2],"unbindable")==0)
- type=MS_UNBINDABLE;
- else {
- fprintf(stderr, "invalid operation: %s\n", argv[2]);
- return 1;
- }
- setfsuid(getuid());
-
- if(mount("", argv[1], "dontcare", type, "") == -1) {
- perror("mount");
- return 1;
- }
- return 0;
- }
- -----------------------------------------------------------------------
-
- Copy the above code snippet into smount.c
- gcc -o smount smount.c
-
-
- (i) To mark all the mounts under /mnt as shared execute the following
- command:
-
- smount /mnt rshared
- the corresponding syntax planned for mount command is
- mount --make-rshared /mnt
-
- just to mark a mount /mnt as shared, execute the following
- command:
- smount /mnt shared
- the corresponding syntax planned for mount command is
- mount --make-shared /mnt
-
- (ii) To mark all the shared mounts under /mnt as slave execute the
- following
-
- command:
- smount /mnt rslave
- the corresponding syntax planned for mount command is
- mount --make-rslave /mnt
-
- just to mark a mount /mnt as slave, execute the following
- command:
- smount /mnt slave
- the corresponding syntax planned for mount command is
- mount --make-slave /mnt
-
- (iii) To mark all the mounts under /mnt as private execute the
- following command:
-
- smount /mnt rprivate
- the corresponding syntax planned for mount command is
- mount --make-rprivate /mnt
-
- just to mark a mount /mnt as private, execute the following
- command:
- smount /mnt private
- the corresponding syntax planned for mount command is
- mount --make-private /mnt
-
- NOTE: by default all the mounts are created as private. But if
- you want to change some shared/slave/unbindable mount as
- private at a later point in time, this command can help.
-
- (iv) To mark all the mounts under /mnt as unbindable execute the
- following
-
- command:
- smount /mnt runbindable
- the corresponding syntax planned for mount command is
- mount --make-runbindable /mnt
-
- just to mark a mount /mnt as unbindable, execute the following
- command:
- smount /mnt unbindable
- the corresponding syntax planned for mount command is
- mount --make-unbindable /mnt
+ mount --make-shared mountpoint
+ mount --make-slave mountpoint
+ mount --make-private mountpoint
+ mount --make-unbindable mountpoint
4) Use cases
mount --rbind / /view/v3
mount --rbind / /view/v4
- and if /usr has a versioning filesystem mounted, than that
+ and if /usr has a versioning filesystem mounted, then that
mount appears at /view/v1/usr, /view/v2/usr, /view/v3/usr and
/view/v4/usr too
For example:
mount --make-shared /mnt
- mount --bin /mnt /tmp
+ mount --bind /mnt /tmp
The mount at /mnt and that at /tmp are both shared and belong
to the same peer group. Anything mounted or unmounted under
then the subtree under the unbindable mount is pruned in the new
location.
- eg: lets say we have the following mount tree.
+ eg: let's say we have the following mount tree.
A
/ \
/ \ / \
D E F G
- Lets say all the mount except the mount C in the tree are
+ Let's say all the mount except the mount C in the tree are
of a type other than unbindable.
If this tree is rbound to say Z
'b' on mounts that receive propagation from mount 'B' and does not have
sub-mounts within them are unmounted.
- Example: Lets say 'B1', 'B2', 'B3' are shared mounts that propagate to
+ Example: Let's say 'B1', 'B2', 'B3' are shared mounts that propagate to
each other.
- lets say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
+ let's say 'A1', 'A2', 'A3' are first mounted at dentry 'b' on mount
'B1', 'B2' and 'B3' respectively.
- lets say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
+ let's say 'C1', 'C2', 'C3' are next mounted at the same dentry 'b' on
mount 'B1', 'B2' and 'B3' respectively.
if 'C1' is unmounted, all the mounts that are most-recently-mounted on
A cloned namespace contains all the mounts as that of the parent
namespace.
- Lets say 'A' and 'B' are the corresponding mounts in the parent and the
+ Let's say 'A' and 'B' are the corresponding mounts in the parent and the
child namespace.
If 'A' is shared, then 'B' is also shared and 'A' and 'B' propagate to
mount --make-slave /mnt
At this point we have the first mount at /tmp and
- its root dentry is 1. Lets call this mount 'A'
+ its root dentry is 1. Let's call this mount 'A'
And then we have a second mount at /tmp1 with root
- dentry 2. Lets call this mount 'B'
+ dentry 2. Let's call this mount 'B'
Next we have a third mount at /mnt with root dentry
- mnt. Lets call this mount 'C'
+ mnt. Let's call this mount 'C'
'B' is the slave of 'A' and 'C' is a slave of 'B'
A -> B -> C
Q3 Why is unbindable mount needed?
- Lets say we want to replicate the mount tree at multiple
+ Let's say we want to replicate the mount tree at multiple
locations within the same subtree.
if one rbind mounts a tree within the same subtree 'n' times
mounts. Here is a example.
step 1:
- lets say the root tree has just two directories with
+ let's say the root tree has just two directories with
one vfsmount.
root
/ \
Unclonable mounts come in handy here.
step 1:
- lets say the root tree has just two directories with
+ let's say the root tree has just two directories with
one vfsmount.
root
/ \
winnt: emulate the Windows NT rule for display/create.
mixed: emulate the Windows NT rule for display,
emulate the Windows 95 rule for create.
- Default setting is `lower'.
+ Default setting is `mixed'.
tz=UTC -- Interpret timestamps as UTC rather than local time.
This option disables the conversion of timestamps
/* migrate the contents of a page to the specified target */
int (*migratepage) (struct page *, struct page *);
int (*launder_page) (struct page *);
+ int (*error_remove_page) (struct mapping *mapping, struct page *page);
};
writepage: called by the VM to write a dirty page to backing store.
prevent redirtying the page, it is kept locked during the whole
operation.
+ error_remove_page: normally set to generic_error_remove_page if truncation
+ is ok for this address space. Used for memory failure handling.
+ Setting this implies you deal with pages going away under you,
+ unless you have them locked or reference counts increased.
+
+
The File Object
===============
Using flexible arrays in the kernel
-Last updated for 2.6.31
+Last updated for 2.6.32
Jonathan Corbet <corbet@lwn.net>
Large contiguous memory allocations can be unreliable in the Linux kernel.
the current code, using flags to ask for high memory is likely to lead to
notably unpleasant side effects.
+It is also possible to define flexible arrays at compile time with:
+
+ DEFINE_FLEX_ARRAY(name, element_size, total);
+
+This macro will result in a definition of an array with the given name; the
+element size and total will be checked for validity at compile time.
+
Storing data into a flexible array is accomplished with a call to:
int flex_array_put(struct flex_array *array, unsigned int element_nr,
Note that it is possible to get back a valid pointer for an element which
has never been stored in the array. Memory for array elements is allocated
one page at a time; a single allocation could provide memory for several
-adjacent elements. The flexible array code does not know if a specific
-element has been written; it only knows if the associated memory is
-present. So a flex_array_get() call on an element which was never stored
-in the array has the potential to return a pointer to random data. If the
-caller does not have a separate way to know which elements were actually
-stored, it might be wise, at least, to add GFP_ZERO to the flags argument
-to ensure that all elements are zeroed.
-
-There is no way to remove a single element from the array. It is possible,
-though, to remove all elements with a call to:
+adjacent elements. Flexible array elements are normally initialized to the
+value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
+involving that number probably result from use of unstored array entries.
+Note that, if array elements are allocated with __GFP_ZERO, they will be
+initialized to zero and this poisoning will not happen.
+
+Individual elements in the array can be cleared with:
+
+ int flex_array_clear(struct flex_array *array, unsigned int element_nr);
+
+This function will set the given element to FLEX_ARRAY_FREE and return
+zero. If storage for the indicated element is not allocated for the array,
+flex_array_clear() will return -EINVAL instead. Note that clearing an
+element does not release the storage associated with it; to reduce the
+allocated size of an array, call:
+
+ int flex_array_shrink(struct flex_array *array);
+
+The return value will be the number of pages of memory actually freed.
+This function works by scanning the array for pages containing nothing but
+FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
+if the array's pages are allocated with __GFP_ZERO.
+
+It is possible to remove all elements of an array with a call to:
void flex_array_free_parts(struct flex_array *array);
Supported chips:
* All Intel Core family
Prefix: 'coretemp'
- CPUID: family 0x6, models 0xe, 0xf, 0x16, 0x17
+ CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
+ 0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
+ 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
+++ /dev/null
-Kernel driver fscher
-====================
-
-Supported chips:
- * Fujitsu-Siemens Hermes chip
- Prefix: 'fscher'
- Addresses scanned: I2C 0x73
-
-Authors:
- Reinhard Nissl <rnissl@gmx.de> based on work
- from Hermann Jung <hej@odn.de>,
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>
-
-Description
------------
-
-This driver implements support for the Fujitsu-Siemens Hermes chip. It is
-described in the 'Register Set Specification BMC Hermes based Systemboard'
-from Fujitsu-Siemens.
-
-The Hermes chip implements a hardware-based system management, e.g. for
-controlling fan speed and core voltage. There is also a watchdog counter on
-the chip which can trigger an alarm and even shut the system down.
-
-The chip provides three temperature values (CPU, motherboard and
-auxiliary), three voltage values (+12V, +5V and battery) and three fans
-(power supply, CPU and auxiliary).
-
-Temperatures are measured in degrees Celsius. The resolution is 1 degree.
-
-Fan rotation speeds are reported in RPM (rotations per minute). The value
-can be divided by a programmable divider (1, 2 or 4) which is stored on
-the chip.
-
-Voltage sensors (also known as "in" sensors) report their values in volts.
-
-All values are reported as final values from the driver. There is no need
-for further calculations.
-
-
-Detailed description
---------------------
-
-Below you'll find a single line description of all the bit values. With
-this information, you're able to decode e. g. alarms, wdog, etc. To make
-use of the watchdog, you'll need to set the watchdog time and enable the
-watchdog. After that it is necessary to restart the watchdog time within
-the specified period of time, or a system reset will occur.
-
-* revision
- READING & 0xff = 0x??: HERMES revision identification
-
-* alarms
- READING & 0x80 = 0x80: CPU throttling active
- READING & 0x80 = 0x00: CPU running at full speed
-
- READING & 0x10 = 0x10: software event (see control:1)
- READING & 0x10 = 0x00: no software event
-
- READING & 0x08 = 0x08: watchdog event (see wdog:2)
- READING & 0x08 = 0x00: no watchdog event
-
- READING & 0x02 = 0x02: thermal event (see temp*:1)
- READING & 0x02 = 0x00: no thermal event
-
- READING & 0x01 = 0x01: fan event (see fan*:1)
- READING & 0x01 = 0x00: no fan event
-
- READING & 0x13 ! 0x00: ALERT LED is flashing
-
-* control
- READING & 0x01 = 0x01: software event
- READING & 0x01 = 0x00: no software event
-
- WRITING & 0x01 = 0x01: set software event
- WRITING & 0x01 = 0x00: clear software event
-
-* watchdog_control
- READING & 0x80 = 0x80: power off on watchdog event while thermal event
- READING & 0x80 = 0x00: watchdog power off disabled (just system reset enabled)
-
- READING & 0x40 = 0x40: watchdog timebase 60 seconds (see also wdog:1)
- READING & 0x40 = 0x00: watchdog timebase 2 seconds
-
- READING & 0x10 = 0x10: watchdog enabled
- READING & 0x10 = 0x00: watchdog disabled
-
- WRITING & 0x80 = 0x80: enable "power off on watchdog event while thermal event"
- WRITING & 0x80 = 0x00: disable "power off on watchdog event while thermal event"
-
- WRITING & 0x40 = 0x40: set watchdog timebase to 60 seconds
- WRITING & 0x40 = 0x00: set watchdog timebase to 2 seconds
-
- WRITING & 0x20 = 0x20: disable watchdog
-
- WRITING & 0x10 = 0x10: enable watchdog / restart watchdog time
-
-* watchdog_state
- READING & 0x02 = 0x02: watchdog system reset occurred
- READING & 0x02 = 0x00: no watchdog system reset occurred
-
- WRITING & 0x02 = 0x02: clear watchdog event
-
-* watchdog_preset
- READING & 0xff = 0x??: configured watch dog time in units (see wdog:3 0x40)
-
- WRITING & 0xff = 0x??: configure watch dog time in units
-
-* in* (0: +5V, 1: +12V, 2: onboard 3V battery)
- READING: actual voltage value
-
-* temp*_status (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
- READING & 0x02 = 0x02: thermal event (overtemperature)
- READING & 0x02 = 0x00: no thermal event
-
- READING & 0x01 = 0x01: sensor is working
- READING & 0x01 = 0x00: sensor is faulty
-
- WRITING & 0x02 = 0x02: clear thermal event
-
-* temp*_input (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
- READING: actual temperature value
-
-* fan*_status (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
- READING & 0x04 = 0x04: fan event (fan fault)
- READING & 0x04 = 0x00: no fan event
-
- WRITING & 0x04 = 0x04: clear fan event
-
-* fan*_div (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
- Divisors 2,4 and 8 are supported, both for reading and writing
-
-* fan*_pwm (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
- READING & 0xff = 0x00: fan may be switched off
- READING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
- READING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
- READING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
-
- WRITING & 0xff = 0x00: fan may be switched off
- WRITING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
- WRITING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
- WRITING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
-
-* fan*_input (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
- READING: actual RPM value
-
-
-Limitations
------------
-
-* Measuring fan speed
-It seems that the chip counts "ripples" (typical fans produce 2 ripples per
-rotation while VERAX fans produce 18) in a 9-bit register. This register is
-read out every second, then the ripple prescaler (2, 4 or 8) is applied and
-the result is stored in the 8 bit output register. Due to the limitation of
-the counting register to 9 bits, it is impossible to measure a VERAX fan
-properly (even with a prescaler of 8). At its maximum speed of 3500 RPM the
-fan produces 1080 ripples per second which causes the counting register to
-overflow twice, leading to only 186 RPM.
-
-* Measuring input voltages
-in2 ("battery") reports the voltage of the onboard lithium battery and not
-+3.3V from the power supply.
-
-* Undocumented features
-Fujitsu-Siemens Computers has not documented all features of the chip so
-far. Their software, System Guard, shows that there are a still some
-features which cannot be controlled by this implementation.
-----------
This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
Example: the following will load the driver for an LTC4215 at address 0x44
on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
Sysfs entries
-----------
This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
Example: the following will load the driver for an LTC4245 at address 0x23
on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
Sysfs entries
Unit: microWatt
RO
-power[1-*]_average_interval Power use averaging interval
+power[1-*]_average_interval Power use averaging interval. A poll
+ notification is sent to this file if the
+ hardware changes the averaging interval.
Unit: milliseconds
RW
+power[1-*]_average_interval_max Maximum power use averaging interval
+ Unit: milliseconds
+ RO
+
+power[1-*]_average_interval_min Minimum power use averaging interval
+ Unit: milliseconds
+ RO
+
power[1-*]_average_highest Historical average maximum power use
Unit: microWatt
RO
Unit: microWatt
RO
+power[1-*]_average_max A poll notification is sent to
+ power[1-*]_average when power use
+ rises above this value.
+ Unit: microWatt
+ RW
+
+power[1-*]_average_min A poll notification is sent to
+ power[1-*]_average when power use
+ sinks below this value.
+ Unit: microWatt
+ RW
+
power[1-*]_input Instantaneous power use
Unit: microWatt
RO
average_highest and average_lowest.
WO
+power[1-*]_accuracy Accuracy of the power meter.
+ Unit: Percent
+ RO
+
+power[1-*]_alarm 1 if the system is drawing more power than the
+ cap allows; 0 otherwise. A poll notification is
+ sent to this file when the power use exceeds the
+ cap. This file only appears if the cap is known
+ to be enforced by hardware.
+ RO
+
+power[1-*]_cap If power use rises above this limit, the
+ system should take action to reduce power use.
+ A poll notification is sent to this file if the
+ cap is changed by the hardware. The *_cap
+ files only appear if the cap is known to be
+ enforced by hardware.
+ Unit: microWatt
+ RW
+
+power[1-*]_cap_hyst Margin of hysteresis built around capping and
+ notification.
+ Unit: microWatt
+ RW
+
+power[1-*]_cap_max Maximum cap that can be set.
+ Unit: microWatt
+ RO
+
+power[1-*]_cap_min Minimum cap that can be set.
+ Unit: microWatt
+ RO
+
**********
* Energy *
**********
+++ /dev/null
-Kernel driver eeprom
-====================
-
-Supported chips:
- * Any EEPROM chip in the designated address range
- Prefix: 'eeprom'
- Addresses scanned: I2C 0x50 - 0x57
- Datasheets: Publicly available from:
- Atmel (www.atmel.com),
- Catalyst (www.catsemi.com),
- Fairchild (www.fairchildsemi.com),
- Microchip (www.microchip.com),
- Philips (www.semiconductor.philips.com),
- Rohm (www.rohm.com),
- ST (www.st.com),
- Xicor (www.xicor.com),
- and others.
-
- Chip Size (bits) Address
- 24C01 1K 0x50 (shadows at 0x51 - 0x57)
- 24C01A 1K 0x50 - 0x57 (Typical device on DIMMs)
- 24C02 2K 0x50 - 0x57
- 24C04 4K 0x50, 0x52, 0x54, 0x56
- (additional data at 0x51, 0x53, 0x55, 0x57)
- 24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52,
- 0x53, 0x55, 0x56, 0x57)
- 24C16 16K 0x50 (additional data at 0x51 - 0x57)
- Sony 2K 0x57
-
- Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37
- Catalyst 34FC02 2K 0x50 - 0x57, SW write protect at 0x30-37
- Catalyst 34RC02 2K 0x50 - 0x57, SW write protect at 0x30-37
- Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37
- Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37
- ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37
-
-
-Authors:
- Frodo Looijaard <frodol@dds.nl>,
- Philip Edelbrock <phil@netroedge.com>,
- Jean Delvare <khali@linux-fr.org>,
- Greg Kroah-Hartman <greg@kroah.com>,
- IBM Corp.
-
-Description
------------
-
-This is a simple EEPROM module meant to enable reading the first 256 bytes
-of an EEPROM (on a SDRAM DIMM for example). However, it will access serial
-EEPROMs on any I2C adapter. The supported devices are generically called
-24Cxx, and are listed above; however the numbering for these
-industry-standard devices may vary by manufacturer.
-
-This module was a programming exercise to get used to the new project
-organization laid out by Frodo, but it should be at least completely
-effective for decoding the contents of EEPROMs on DIMMs.
-
-DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants.
-The other devices will not be found on a DIMM because they respond to more
-than one address.
-
-DDC Monitors may contain any device. Often a 24C01, which responds to all 8
-addresses, is found.
-
-Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the
-specification, so it is guess work and far from being complete.
-
-The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional
-software write protect register at 0x30 - 0x37 (0x20 less than the memory
-location). The chip responds to "write quick" detection at this address but
-does not respond to byte reads. If this register is present, the lower 128
-bytes of the memory array are not write protected. Any byte data write to
-this address will write protect the memory array permanently, and the
-device will no longer respond at the 0x30-37 address. The eeprom driver
-does not support this register.
-
-Lacking functionality:
-
-* Full support for larger devices (24C04, 24C08, 24C16). These are not
-typically found on a PC. These devices will appear as separate devices at
-multiple addresses.
-
-* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512).
-These devices require two-byte address fields and are not supported.
-
-* Enable Writing. Again, no technical reason why not, but making it easy
-to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy
-to disable the DIMMs (potentially preventing the computer from booting)
-until the values are restored somehow.
-
-Use:
-
-After inserting the module (and any other required SMBus/i2c modules), you
-should have some EEPROM directories in /sys/bus/i2c/devices/* of names such
-as "0-0050". Inside each of these is a series of files, the eeprom file
-contains the binary data from EEPROM.
+++ /dev/null
-Kernel driver max6875
-=====================
-
-Supported chips:
- * Maxim MAX6874, MAX6875
- Prefix: 'max6875'
- Addresses scanned: None (see below)
- Datasheet:
- http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
-
-Author: Ben Gardner <bgardner@wabtec.com>
-
-
-Description
------------
-
-The Maxim MAX6875 is an EEPROM-programmable power-supply sequencer/supervisor.
-It provides timed outputs that can be used as a watchdog, if properly wired.
-It also provides 512 bytes of user EEPROM.
-
-At reset, the MAX6875 reads the configuration EEPROM into its configuration
-registers. The chip then begins to operate according to the values in the
-registers.
-
-The Maxim MAX6874 is a similar, mostly compatible device, with more intputs
-and outputs:
- vin gpi vout
-MAX6874 6 4 8
-MAX6875 4 3 5
-
-See the datasheet for more information.
-
-
-Sysfs entries
--------------
-
-eeprom - 512 bytes of user-defined EEPROM space.
-
-
-General Remarks
----------------
-
-Valid addresses for the MAX6875 are 0x50 and 0x52.
-Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
-
-Example:
-$ modprobe max6875 force=0,0x50
-
-The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
-addresses. For example, for address 0x50, it also reserves 0x51.
-The even-address instance is called 'max6875', the odd one is 'dummy'.
-
-
-Programming the chip using i2c-dev
-----------------------------------
-
-Use the i2c-dev interface to access and program the chips.
-Reads and writes are performed differently depending on the address range.
-
-The configuration registers are at addresses 0x00 - 0x45.
-Use i2c_smbus_write_byte_data() to write a register and
-i2c_smbus_read_byte_data() to read a register.
-The command is the register number.
-
-Examples:
-To write a 1 to register 0x45:
- i2c_smbus_write_byte_data(fd, 0x45, 1);
-
-To read register 0x45:
- value = i2c_smbus_read_byte_data(fd, 0x45);
-
-
-The configuration EEPROM is at addresses 0x8000 - 0x8045.
-The user EEPROM is at addresses 0x8100 - 0x82ff.
-
-Use i2c_smbus_write_word_data() to write a byte to EEPROM.
-
-The command is the upper byte of the address: 0x80, 0x81, or 0x82.
-The data word is the lower part of the address or'd with data << 8.
- cmd = address >> 8;
- val = (address & 0xff) | (data << 8);
-
-Example:
-To write 0x5a to address 0x8003:
- i2c_smbus_write_word_data(fd, 0x80, 0x5a03);
-
-
-Reading data from the EEPROM is a little more complicated.
-Use i2c_smbus_write_byte_data() to set the read address and then
-i2c_smbus_read_byte() or i2c_smbus_read_i2c_block_data() to read the data.
-
-Example:
-To read data starting at offset 0x8100, first set the address:
- i2c_smbus_write_byte_data(fd, 0x81, 0x00);
-
-And then read the data
- value = i2c_smbus_read_byte(fd);
-
- or
-
- count = i2c_smbus_read_i2c_block_data(fd, 0x84, 16, buffer);
-
-The block read should read 16 bytes.
-0x84 is the block read command.
-
-See the datasheet for more details.
-
deleted.
Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
While this interface should only be used when in-kernel device declaration
can't be done, there is a variety of cases where it can be helpful:
To create the appropriate character device files automatically with
udev, a rule like
- KERNEL="umad*", NAME="infiniband/%k"
- KERNEL="issm*", NAME="infiniband/%k"
+ KERNEL=="umad*", NAME="infiniband/%k"
+ KERNEL=="issm*", NAME="infiniband/%k"
can be used. This will create device nodes named
To create the appropriate character device files automatically with
udev, a rule like
- KERNEL="uverbs*", NAME="infiniband/%k"
+ KERNEL=="uverbs*", NAME="infiniband/%k"
can be used. This will create device nodes named
<http://mikonos.dia.unisa.it/tcfs>
'l' 40-7F linux/udf_fs_i.h in development:
<http://sourceforge.net/projects/linux-udf/>
+'m' 00-09 linux/mmtimer.h
'm' all linux/mtio.h conflict!
'm' all linux/soundcard.h conflict!
'm' all linux/synclink.h conflict!
After a successful return from register_appl(), CAPI messages from the
application may be passed to the driver for the device via calls to the
-send_message() callback function. The CAPI message to send is stored in the
-data portion of an skb. Conversely, the driver may call Kernel CAPI's
-capi_ctr_handle_message() function to pass a received CAPI message to Kernel
-CAPI for forwarding to an application, specifying its ApplID.
+send_message() callback function. Conversely, the driver may call Kernel
+CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
+Kernel CAPI for forwarding to an application, specifying its ApplID.
Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
forwarded as calls to the release_appl() callback function, passing the same
to accepting or queueing the message. Errors occurring during the
actual processing of the message should be signaled with an
appropriate reply message.
+ May be called in process or interrupt context.
Calls to this function are not serialized by Kernel CAPI, ie. it must
be prepared to be re-entered.
system entry, /proc/capi/controllers/<n>; will be called with a
pointer to the device's capi_ctr structure as the last (data) argument
-Note: Callback functions are never called in interrupt context.
+Note: Callback functions except send_message() are never called in interrupt
+context.
- to be filled in before calling capi_ctr_ready():
value to return for CAPI_GET_SERIAL
-4.3 The _cmsg Structure
+4.3 SKBs
+
+CAPI messages are passed between Kernel CAPI and the driver via send_message()
+and capi_ctr_handle_message(), stored in the data portion of a socket buffer
+(skb). Each skb contains a single CAPI message coded according to the CAPI 2.0
+standard.
+
+For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
+payload data immediately follows the CAPI message itself within the same skb.
+The Data and Data64 parameters are not used for processing. The Data64
+parameter may be omitted by setting the length field of the CAPI message to 22
+instead of 30.
+
+
+4.4 The _cmsg Structure
(declared in <linux/isdn/capiutil.h>)
The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters, of
-which only those appearing in the message type currently being processed are
-actually used. Unused members should be set to zero.
+accessible form. It contains members for all possible CAPI 2.0 parameters,
+including subparameters of the Additional Info and B Protocol structured
+parameters, with the following exceptions:
+
+* second Calling party number (CONNECT_IND)
+
+* Data64 (DATA_B3_REQ and DATA_B3_IND)
+
+* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
+
+* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
+ and SELECT_B_PROTOCOL_REQ)
+
+Only those parameters appearing in the message type currently being processed
+are actually used. Unused members should be set to zero.
Members are named after the CAPI 2.0 standard names of the parameters they
represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
u32 for CAPI parameters of type 'dword'
-_cstruct for CAPI parameters of type 'struct' not containing any
- variably-sized (struct) subparameters (eg. 'Called Party Number')
+_cstruct for CAPI parameters of type 'struct'
The member is a pointer to a buffer containing the parameter in
CAPI encoding (length + content). It may also be NULL, which will
be taken to represent an empty (zero length) parameter.
+ Subparameters are stored in encoded form within the content part.
-_cmstruct for CAPI parameters of type 'struct' containing 'struct'
- subparameters ('Additional Info' and 'B Protocol')
+_cmstruct alternative representation for CAPI parameters of type 'struct'
+ (used only for the 'Additional Info' and 'B Protocol' parameters)
The representation is a single byte containing one of the values:
- CAPI_DEFAULT: the parameter is empty
- CAPI_COMPOSE: the values of the subparameters are stored
- individually in the corresponding _cmsg structure members
+ CAPI_DEFAULT: The parameter is empty/absent.
+ CAPI_COMPOSE: The parameter is present.
+ Subparameter values are stored individually in the corresponding
+ _cmsg structure members.
Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
messages between their transport encoding described in the CAPI 2.0 standard
be NULL if the command/subcommand is not one of those defined in the
CAPI 2.0 standard.
+
+7. Debugging
+
+The module kernelcapi has a module parameter showcapimsgs controlling some
+debugging output produced by the module. It can only be set when the module is
+loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
+the command line or in the configuration file.
+
+If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
+application up and down events.
+
+In addition, every registered CAPI controller has an associated traceflag
+parameter controlling how CAPI messages sent from and to tha controller are
+logged. The traceflag parameter is initialized with the value of the
+showcapimsgs parameter when the controller is registered, but can later be
+changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
+
+If the value of traceflag is non-zero, CAPI messages are logged.
+DATA_B3 messages are only logged if the value of traceflag is > 2.
+
+If the lowest bit of traceflag is set, only the command/subcommand and message
+length are logged. Otherwise, kernelcapi logs a readable representation of
+the entire message.
INSTALL_PATH specifies where to place the updated kernel and system map
images. Default is /boot, but you can set it to other values.
+INSTALLKERNEL
+--------------------------------------------------
+Install script called when using "make install".
+The default name is "installkernel".
+
+The script will be called with the following arguments:
+ $1 - kernel version
+ $2 - kernel image file
+ $3 - kernel map file
+ $4 - default install path (use root directory if blank)
+
+The implmentation of "make install" is architecture specific
+and it may differ from the above.
+
+INSTALLKERNEL is provided to enable the possibility to
+specify a custom installer when cross compiling a kernel.
MODLIB
--------------------------------------------------
--- 3.9 Dependency tracking
--- 3.10 Special Rules
--- 3.11 $(CC) support functions
+ --- 3.12 $(LD) support functions
=== 4 Host Program support
--- 4.1 Simple Host Program
The second argument is optional, and if supplied will be used
if first argument is not supported.
- ld-option
- ld-option is used to check if $(CC) when used to link object files
+ cc-ldoption
+ cc-ldoption is used to check if $(CC) when used to link object files
supports the given option. An optional second option may be
specified if first option are not supported.
Example:
#arch/i386/kernel/Makefile
- vsyscall-flags += $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ vsyscall-flags += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
In the above example, vsyscall-flags will be assigned the option
-Wl$(comma)--hash-style=sysv if it is supported by $(CC).
endif
endif
+--- 3.12 $(LD) support functions
+
+ ld-option
+ ld-option is used to check if $(LD) supports the supplied option.
+ ld-option takes two options as arguments.
+ The second argument is an optional option that can be used if the
+ first option is not supported by $(LD).
+
+ Example:
+ #Makefile
+ LDFLAGS_vmlinux += $(call really-ld-option, -X)
+
+
=== 4 Host Program support
Kbuild supports building executables on the host for use during the
earlyprintk= [X86,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
+ earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
Append ",keep" to not disable it when the real console
Not all bits in the mask can be modified. Not all bits that can be
modified do anything. Not all hot keys can be individually controlled
-by the mask. Some models do not support the mask at all, and in those
-models, hot keys cannot be controlled individually. The behaviour of
-the mask is, therefore, highly dependent on the ThinkPad model.
+by the mask. Some models do not support the mask at all. The behaviour
+of the mask is, therefore, highly dependent on the ThinkPad model.
+
+The driver will filter out any unmasked hotkeys, so even if the firmware
+doesn't allow disabling an specific hotkey, the driver will not report
+events for unmasked hotkeys.
Note that unmasking some keys prevents their default behavior. For
example, if Fn+F5 is unmasked, that key will no longer enable/disable
-Bluetooth by itself.
+Bluetooth by itself in firmware.
-Note also that not all Fn key combinations are supported through ACPI.
-For example, on the X40, the brightness, volume and "Access IBM" buttons
-do not generate ACPI events even with this driver. They *can* be used
-through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
+Note also that not all Fn key combinations are supported through ACPI
+depending on the ThinkPad model and firmware version. On those
+ThinkPads, it is still possible to support some extra hotkeys by
+polling the "CMOS NVRAM" at least 10 times per second. The driver
+attempts to enables this functionality automatically when required.
procfs notes:
1: does nothing
hotkey_mask:
- bit mask to enable driver-handling (and depending on
+ bit mask to enable reporting (and depending on
the firmware, ACPI event generation) for each hot key
(see above). Returns the current status of the hot keys
mask, and allows one to modify it.
- Note: when NVRAM polling is active, the firmware mask
- will be different from the value returned by
- hotkey_mask. The driver will retain enabled bits for
- hotkeys that are under NVRAM polling even if the
- firmware refuses them, and will not set these bits on
- the firmware hot key mask.
-
hotkey_all_mask:
bit mask that should enable event reporting for all
supported hot keys, when echoed to hotkey_mask above.
bit mask that should enable event reporting for all
supported hot keys, except those which are always
handled by the firmware anyway. Echo it to
- hotkey_mask above, to use.
+ hotkey_mask above, to use. This is the default mask
+ used by the driver.
hotkey_source_mask:
bit mask that selects which hot keys will the driver
based on the capabilities reported by the ACPI firmware,
but it can be overridden at runtime.
- Hot keys whose bits are set in both hotkey_source_mask
- and also on hotkey_mask are polled for in NVRAM. Only a
- few hot keys are available through CMOS NVRAM polling.
+ Hot keys whose bits are set in hotkey_source_mask are
+ polled for in NVRAM, and reported as hotkey events if
+ enabled in hotkey_mask. Only a few hot keys are
+ available through CMOS NVRAM polling.
Warning: when in NVRAM mode, the volume up/down/mute
keys are synthesized according to changes in the mixer,
0x2305 System is waking up from suspend to eject bay
0x2404 System is waking up from hibernation to undock
0x2405 System is waking up from hibernation to eject bay
+0x5010 Brightness level changed/control event
The above events are never propagated by the driver.
0x4003 Undocked (see 0x2x04), can sleep again
0x500B Tablet pen inserted into its storage bay
0x500C Tablet pen removed from its storage bay
-0x5010 Brightness level changed (newer Lenovo BIOSes)
The above events are propagated by the driver.
2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN. Process
these keys on userspace somehow (e.g. by calling xbacklight).
+ The driver will do this automatically if it detects that ACPI video
+ has been disabled.
Bluetooth
0x020400: Marker for 16 LEDs support. Also, LEDs that are known
to not exist in a given model are not registered with
the LED sysfs class anymore.
+
+0x020500: Updated hotkey driver, hotkey_mask is always available
+ and it is always able to disable hot keys. Very old
+ thinkpads are properly supported. hotkey_bios_mask
+ is deprecated and marked for removal.
#include <signal.h>
#include "linux/lguest_launcher.h"
#include "linux/virtio_config.h"
-#include <linux/virtio_ids.h>
#include "linux/virtio_net.h"
#include "linux/virtio_blk.h"
#include "linux/virtio_console.h"
--- /dev/null
+Kernel driver eeprom
+====================
+
+Supported chips:
+ * Any EEPROM chip in the designated address range
+ Prefix: 'eeprom'
+ Addresses scanned: I2C 0x50 - 0x57
+ Datasheets: Publicly available from:
+ Atmel (www.atmel.com),
+ Catalyst (www.catsemi.com),
+ Fairchild (www.fairchildsemi.com),
+ Microchip (www.microchip.com),
+ Philips (www.semiconductor.philips.com),
+ Rohm (www.rohm.com),
+ ST (www.st.com),
+ Xicor (www.xicor.com),
+ and others.
+
+ Chip Size (bits) Address
+ 24C01 1K 0x50 (shadows at 0x51 - 0x57)
+ 24C01A 1K 0x50 - 0x57 (Typical device on DIMMs)
+ 24C02 2K 0x50 - 0x57
+ 24C04 4K 0x50, 0x52, 0x54, 0x56
+ (additional data at 0x51, 0x53, 0x55, 0x57)
+ 24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52,
+ 0x53, 0x55, 0x56, 0x57)
+ 24C16 16K 0x50 (additional data at 0x51 - 0x57)
+ Sony 2K 0x57
+
+ Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37
+ Catalyst 34FC02 2K 0x50 - 0x57, SW write protect at 0x30-37
+ Catalyst 34RC02 2K 0x50 - 0x57, SW write protect at 0x30-37
+ Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37
+ Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37
+ ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37
+
+
+Authors:
+ Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ Jean Delvare <khali@linux-fr.org>,
+ Greg Kroah-Hartman <greg@kroah.com>,
+ IBM Corp.
+
+Description
+-----------
+
+This is a simple EEPROM module meant to enable reading the first 256 bytes
+of an EEPROM (on a SDRAM DIMM for example). However, it will access serial
+EEPROMs on any I2C adapter. The supported devices are generically called
+24Cxx, and are listed above; however the numbering for these
+industry-standard devices may vary by manufacturer.
+
+This module was a programming exercise to get used to the new project
+organization laid out by Frodo, but it should be at least completely
+effective for decoding the contents of EEPROMs on DIMMs.
+
+DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants.
+The other devices will not be found on a DIMM because they respond to more
+than one address.
+
+DDC Monitors may contain any device. Often a 24C01, which responds to all 8
+addresses, is found.
+
+Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the
+specification, so it is guess work and far from being complete.
+
+The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional
+software write protect register at 0x30 - 0x37 (0x20 less than the memory
+location). The chip responds to "write quick" detection at this address but
+does not respond to byte reads. If this register is present, the lower 128
+bytes of the memory array are not write protected. Any byte data write to
+this address will write protect the memory array permanently, and the
+device will no longer respond at the 0x30-37 address. The eeprom driver
+does not support this register.
+
+Lacking functionality:
+
+* Full support for larger devices (24C04, 24C08, 24C16). These are not
+typically found on a PC. These devices will appear as separate devices at
+multiple addresses.
+
+* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512).
+These devices require two-byte address fields and are not supported.
+
+* Enable Writing. Again, no technical reason why not, but making it easy
+to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy
+to disable the DIMMs (potentially preventing the computer from booting)
+until the values are restored somehow.
+
+Use:
+
+After inserting the module (and any other required SMBus/i2c modules), you
+should have some EEPROM directories in /sys/bus/i2c/devices/* of names such
+as "0-0050". Inside each of these is a series of files, the eeprom file
+contains the binary data from EEPROM.
--- /dev/null
+Kernel driver max6875
+=====================
+
+Supported chips:
+ * Maxim MAX6874, MAX6875
+ Prefix: 'max6875'
+ Addresses scanned: None (see below)
+ Datasheet:
+ http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
+
+Author: Ben Gardner <bgardner@wabtec.com>
+
+
+Description
+-----------
+
+The Maxim MAX6875 is an EEPROM-programmable power-supply sequencer/supervisor.
+It provides timed outputs that can be used as a watchdog, if properly wired.
+It also provides 512 bytes of user EEPROM.
+
+At reset, the MAX6875 reads the configuration EEPROM into its configuration
+registers. The chip then begins to operate according to the values in the
+registers.
+
+The Maxim MAX6874 is a similar, mostly compatible device, with more intputs
+and outputs:
+ vin gpi vout
+MAX6874 6 4 8
+MAX6875 4 3 5
+
+See the datasheet for more information.
+
+
+Sysfs entries
+-------------
+
+eeprom - 512 bytes of user-defined EEPROM space.
+
+
+General Remarks
+---------------
+
+Valid addresses for the MAX6875 are 0x50 and 0x52.
+Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
+
+Example:
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
+
+The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
+addresses. For example, for address 0x50, it also reserves 0x51.
+The even-address instance is called 'max6875', the odd one is 'dummy'.
+
+
+Programming the chip using i2c-dev
+----------------------------------
+
+Use the i2c-dev interface to access and program the chips.
+Reads and writes are performed differently depending on the address range.
+
+The configuration registers are at addresses 0x00 - 0x45.
+Use i2c_smbus_write_byte_data() to write a register and
+i2c_smbus_read_byte_data() to read a register.
+The command is the register number.
+
+Examples:
+To write a 1 to register 0x45:
+ i2c_smbus_write_byte_data(fd, 0x45, 1);
+
+To read register 0x45:
+ value = i2c_smbus_read_byte_data(fd, 0x45);
+
+
+The configuration EEPROM is at addresses 0x8000 - 0x8045.
+The user EEPROM is at addresses 0x8100 - 0x82ff.
+
+Use i2c_smbus_write_word_data() to write a byte to EEPROM.
+
+The command is the upper byte of the address: 0x80, 0x81, or 0x82.
+The data word is the lower part of the address or'd with data << 8.
+ cmd = address >> 8;
+ val = (address & 0xff) | (data << 8);
+
+Example:
+To write 0x5a to address 0x8003:
+ i2c_smbus_write_word_data(fd, 0x80, 0x5a03);
+
+
+Reading data from the EEPROM is a little more complicated.
+Use i2c_smbus_write_byte_data() to set the read address and then
+i2c_smbus_read_byte() or i2c_smbus_read_i2c_block_data() to read the data.
+
+Example:
+To read data starting at offset 0x8100, first set the address:
+ i2c_smbus_write_byte_data(fd, 0x81, 0x00);
+
+And then read the data
+ value = i2c_smbus_read_byte(fd);
+
+ or
+
+ count = i2c_smbus_read_i2c_block_data(fd, 0x84, 16, buffer);
+
+The block read should read 16 bytes.
+0x84 is the block read command.
+
+See the datasheet for more details.
+
pgset "dstmac 00:00:00:00:00:00" sets MAC destination address
pgset "srcmac 00:00:00:00:00:00" sets MAC source address
+ pgset "queue_map_min 0" Sets the min value of tx queue interval
+ pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices
+ To select queue 1 of a given device,
+ use queue_map_min=1 and queue_map_max=1
+
pgset "src_mac_count 1" Sets the number of MACs we'll range through.
The 'minimum' MAC is what you set with srcmac.
IPDST_RND, UDPSRC_RND,
UDPDST_RND, MACSRC_RND, MACDST_RND
MPLS_RND, VID_RND, SVID_RND
+ QUEUE_MAP_RND # queue map random
+ QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
+
pgset "udp_src_min 9" set UDP source port min, If < udp_src_max, then
cycle through the port range.
memset(&hwtstamp, 0, sizeof(hwtstamp));
strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
hwtstamp.ifr_data = (void *)&hwconfig;
- memset(&hwconfig, 0, sizeof(&hwconfig));
+ memset(&hwconfig, 0, sizeof(hwconfig));
hwconfig.tx_type =
(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;
discharging (i.e. powering a load), etc.). This corresponds to
BATTERY_STATUS_* values, as defined in battery.h.
+CHARGE_TYPE - batteries can typically charge at different rates.
+This defines trickle and fast charges. For batteries that
+are already charged or discharging, 'n/a' can be displayed (or
+'unknown', if the status is not known).
+
HEALTH - represents health of the battery, values corresponds to
POWER_SUPPLY_HEALTH_*, defined in battery.h.
ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
CAPACITY - capacity in percents.
+CAPACITY_LEVEL - capacity level. This corresponds to
+POWER_SUPPLY_CAPACITY_LEVEL_*.
TEMP - temperature of the power supply.
TEMP_AMBIENT - ambient temperature.
Controller Register Map
-------------------------
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+ BAR0 offset Register
+ 0x11C5C Link Interface IRQ Set
+ 0x11C60 Link Interface IRQ Clear
+
+ BAR2 offset Register
+ 0x10 Inbound Message Register 0
+ 0x14 Inbound Message Register 1
+ 0x18 Outbound Message Register 0
+ 0x1C Outbound Message Register 1
+ 0x20 Inbound Doorbell Register
+ 0x24 Inbound Interrupt Status Register
+ 0x28 Inbound Interrupt Mask Register
+ 0x30 Outbound Interrupt Status Register
+ 0x34 Outbound Interrupt Mask Register
+ 0x40 Inbound Queue Port
+ 0x44 Outbound Queue Port
+
For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
BAR0 offset Register
-----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
This file is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
pcm_devs - Number of PCM devices assigned to each card
(default = 1, up to 4)
pcm_substreams - Number of PCM substreams assigned to each PCM
- (default = 8, up to 16)
+ (default = 8, up to 128)
hrtimer - Use hrtimer (=1, default) or system timer (=0)
fake_buffer - Fake buffer allocations (default = 1)
laptop laptop with HP jack sensing
mobile mobile devices with HP jack sensing
thinkpad Lenovo Thinkpad X300
+ touchsmart HP Touchsmart
AD1884
======
5stack-no-fp D965 5stack without front panel
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup
+ volknob Fixes with volume-knob widget 0x24
auto BIOS setup (default)
STAC92HD71B*
of error messages about running out of file handles, you might
want to increase this limit.
-The three values in file-nr denote the number of allocated
-file handles, the number of unused file handles and the maximum
-number of file handles. When the allocated file handles come
-close to the maximum, but the number of unused file handles is
-significantly greater than 0, you've encountered a peak in your
-usage of file handles and you don't need to increase the maximum.
-
+Historically, the three values in file-nr denoted the number of
+allocated file handles, the number of allocated but unused file
+handles, and the maximum number of file handles. Linux 2.6 always
+reports 0 as the number of free file handles -- this is not an
+error, it just means that the number of allocated file handles
+exactly matches the number of used file handles.
+
+Attempts to allocate more file descriptors than file-max are
+reported with printk, look for "VFS: file-max limit <number>
+reached".
==============================================================
nr_open:
- callhome [ S390 only ]
- auto_msgmni
- core_pattern
+- core_pipe_limit
- core_uses_pid
- ctrl-alt-del
- dentry-state
==============================================================
+core_pipe_limit:
+
+This sysctl is only applicable when core_pattern is configured to pipe core
+files to user space helper a (when the first character of core_pattern is a '|',
+see above). When collecting cores via a pipe to an application, it is
+occasionally usefull for the collecting application to gather data about the
+crashing process from its /proc/pid directory. In order to do this safely, the
+kernel must wait for the collecting process to exit, so as not to remove the
+crashing processes proc files prematurely. This in turn creates the possibility
+that a misbehaving userspace collecting process can block the reaping of a
+crashed process simply by never exiting. This sysctl defends against that. It
+defines how many concurrent crashing processes may be piped to user space
+applications in parallel. If this value is exceeded, then those crashing
+processes above that value are noted via the kernel log and their cores are
+skipped. 0 is a special value, indicating that unlimited processes may be
+captured in parallel, but that no waiting will take place (i.e. the collecting
+process is not guaranteed access to /proc/<crahing pid>/). This value defaults
+to 0.
+
+==============================================================
+
core_uses_pid:
The default coredump filename is "core". By setting
- legacy_va_layout
- lowmem_reserve_ratio
- max_map_count
+- memory_failure_early_kill
+- memory_failure_recovery
- min_free_kbytes
- min_slab_ratio
- min_unmapped_ratio
- vfs_cache_pressure
- zone_reclaim_mode
-
==============================================================
block_dump
The default value is 65536.
+=============================================================
+
+memory_failure_early_kill:
+
+Control how to kill processes when uncorrected memory error (typically
+a 2bit error in a memory module) is detected in the background by hardware
+that cannot be handled by the kernel. In some cases (like the page
+still having a valid copy on disk) the kernel will handle the failure
+transparently without affecting any applications. But if there is
+no other uptodate copy of the data it will kill to prevent any data
+corruptions from propagating.
+
+1: Kill all processes that have the corrupted and not reloadable page mapped
+as soon as the corruption is detected. Note this is not supported
+for a few types of pages, like kernel internally allocated data or
+the swap cache, but works for the majority of user pages.
+
+0: Only unmap the corrupted page from all processes and only kill a process
+who tries to access it.
+
+The kill is done using a catchable SIGBUS with BUS_MCEERR_AO, so processes can
+handle this if they want to.
+
+This is only active on architectures/platforms with advanced machine
+check handling and depends on the hardware capabilities.
+
+Applications can override this setting individually with the PR_MCE_KILL prctl
+
+==============================================================
+
+memory_failure_recovery
+
+Enable memory failure recovery (when supported by the platform)
+
+1: Attempt recovery.
+
+0: Always panic on a memory failure.
+
==============================================================
min_free_kbytes:
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
+#include <string.h>
#define _STR(x) #x
#define STR(x) _STR(x)
return NULL;
}
+ strcat(debugfs, "/tracing/");
debugfs_found = 1;
return debugfs;
--- /dev/null
+What is hwpoison?
+
+Upcoming Intel CPUs have support for recovering from some memory errors
+(``MCA recovery''). This requires the OS to declare a page "poisoned",
+kill the processes associated with it and avoid using it in the future.
+
+This patchkit implements the necessary infrastructure in the VM.
+
+To quote the overview comment:
+
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * This focusses on pages detected as corrupted in the background.
+ * When the current CPU tries to consume corruption the currently
+ * running process can just be killed directly instead. This implies
+ * that if the error cannot be handled for some reason it's safe to
+ * just ignore it because no corruption has been consumed yet. Instead
+ * when that happens another machine check will happen.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * Some of the operations here are somewhat inefficient and have non
+ * linear algorithmic complexity, because the data structures have not
+ * been optimized for this case. This is in particular the case
+ * for the mapping from a vma to a process. Since this case is expected
+ * to be rare we hope we can get away with this.
+
+The code consists of a the high level handler in mm/memory-failure.c,
+a new page poison bit and various checks in the VM to handle poisoned
+pages.
+
+The main target right now is KVM guests, but it works for all kinds
+of applications. KVM support requires a recent qemu-kvm release.
+
+For the KVM use there was need for a new signal type so that
+KVM can inject the machine check into the guest with the proper
+address. This in theory allows other applications to handle
+memory failures too. The expection is that near all applications
+won't do that, but some very specialized ones might.
+
+---
+
+There are two (actually three) modi memory failure recovery can be in:
+
+vm.memory_failure_recovery sysctl set to zero:
+ All memory failures cause a panic. Do not attempt recovery.
+ (on x86 this can be also affected by the tolerant level of the
+ MCE subsystem)
+
+early kill
+ (can be controlled globally and per process)
+ Send SIGBUS to the application as soon as the error is detected
+ This allows applications who can process memory errors in a gentle
+ way (e.g. drop affected object)
+ This is the mode used by KVM qemu.
+
+late kill
+ Send SIGBUS when the application runs into the corrupted page.
+ This is best for memory error unaware applications and default
+ Note some pages are always handled as late kill.
+
+---
+
+User control:
+
+vm.memory_failure_recovery
+ See sysctl.txt
+
+vm.memory_failure_early_kill
+ Enable early kill mode globally
+
+PR_MCE_KILL
+ Set early/late kill mode/revert to system default
+ arg1: PR_MCE_KILL_CLEAR: Revert to system default
+ arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode
+ PR_MCE_KILL_EARLY: Early kill
+ PR_MCE_KILL_LATE: Late kill
+ PR_MCE_KILL_DEFAULT: Use system global default
+PR_MCE_KILL_GET
+ return current mode
+
+
+---
+
+Testing:
+
+madvise(MADV_POISON, ....)
+ (as root)
+ Poison a page in the process for testing
+
+
+hwpoison-inject module through debugfs
+ /sys/debug/hwpoison/corrupt-pfn
+
+Inject hwpoison fault at PFN echoed into this file
+
+
+Architecture specific MCE injector
+
+x86 has mce-inject, mce-test
+
+Some portable hwpoison test programs in mce-test, see blow.
+
+---
+
+References:
+
+http://halobates.de/mce-lc09-2.pdf
+ Overview presentation from LinuxCon 09
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
+ Test suite (hwpoison specific portable tests in tsrc)
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git
+ x86 specific injector
+
+
+---
+
+Limitations:
+
+- Not all page types are supported and never will. Most kernel internal
+objects cannot be recovered, only LRU pages for now.
+- Right now hugepage support is missing.
+
+---
+Andi Kleen, Oct 2009
+
readable by all but writable only by root:
max_kernel_pages - set to maximum number of kernel pages that KSM may use
- e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages"
+ e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
Value 0 imposes no limit on the kernel pages KSM may use;
but note that any process using MADV_MERGEABLE can cause
KSM to allocate these pages, unswappable until it exits.
- Default: 2000 (chosen for demonstration purposes)
+ Default: quarter of memory (chosen to not pin too much)
pages_to_scan - how many present pages to scan before ksmd goes to sleep
- e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan"
- Default: 200 (chosen for demonstration purposes)
+ e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
+ Default: 100 (chosen for demonstration purposes)
sleep_millisecs - how many milliseconds ksmd should sleep before next scan
e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs"
set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run",
set 2 to stop ksmd and unmerge all pages currently merged,
but leave mergeable areas registered for next run
- Default: 1 (for immediate use by apps which register)
+ Default: 0 (must be changed to 1 to activate KSM,
+ except if CONFIG_SYSFS is disabled)
The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
proportion there would also indicate poor use of madvise MADV_MERGEABLE.
Izik Eidus,
-Hugh Dickins, 30 July 2009
+Hugh Dickins, 24 Sept 2009
mm start up ... this is a loose form of stability on mm_users. For
example, it is used in copy_mm to protect against a racing tlb_gather_mmu
single address space optimization, so that the zap_page_range (from
-vmtruncate) does not lose sending ipi's to cloned threads that might
+truncate) does not lose sending ipi's to cloned threads that might
be spawned underneath it and go to user mode to drag in pte's into tlbs.
swap_lock
* page-types: Tool for querying page flags
*
* Copyright (C) 2009 Intel corporation
- * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Authors: Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Released under the General Public License (GPL).
*/
+#define _LARGEFILE64_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <getopt.h>
#include <limits.h>
+#include <assert.h>
#include <sys/types.h>
#include <sys/errno.h>
#include <sys/fcntl.h>
+/*
+ * pagemap kernel ABI bits
+ */
+
+#define PM_ENTRY_BYTES sizeof(uint64_t)
+#define PM_STATUS_BITS 3
+#define PM_STATUS_OFFSET (64 - PM_STATUS_BITS)
+#define PM_STATUS_MASK (((1LL << PM_STATUS_BITS) - 1) << PM_STATUS_OFFSET)
+#define PM_STATUS(nr) (((nr) << PM_STATUS_OFFSET) & PM_STATUS_MASK)
+#define PM_PSHIFT_BITS 6
+#define PM_PSHIFT_OFFSET (PM_STATUS_OFFSET - PM_PSHIFT_BITS)
+#define PM_PSHIFT_MASK (((1LL << PM_PSHIFT_BITS) - 1) << PM_PSHIFT_OFFSET)
+#define PM_PSHIFT(x) (((u64) (x) << PM_PSHIFT_OFFSET) & PM_PSHIFT_MASK)
+#define PM_PFRAME_MASK ((1LL << PM_PSHIFT_OFFSET) - 1)
+#define PM_PFRAME(x) ((x) & PM_PFRAME_MASK)
+
+#define PM_PRESENT PM_STATUS(4LL)
+#define PM_SWAP PM_STATUS(2LL)
+
+
/*
* kernel page flags
*/
#define KPF_COMPOUND_TAIL 16
#define KPF_HUGE 17
#define KPF_UNEVICTABLE 18
+#define KPF_HWPOISON 19
#define KPF_NOPAGE 20
+#define KPF_KSM 21
/* [32-] kernel hacking assistances */
#define KPF_RESERVED 32
[KPF_COMPOUND_TAIL] = "T:compound_tail",
[KPF_HUGE] = "G:huge",
[KPF_UNEVICTABLE] = "u:unevictable",
+ [KPF_HWPOISON] = "X:hwpoison",
[KPF_NOPAGE] = "n:nopage",
+ [KPF_KSM] = "x:ksm",
[KPF_RESERVED] = "r:reserved",
[KPF_MLOCKED] = "m:mlocked",
static unsigned long opt_offset[MAX_ADDR_RANGES];
static unsigned long opt_size[MAX_ADDR_RANGES];
+#define MAX_VMAS 10240
+static int nr_vmas;
+static unsigned long pg_start[MAX_VMAS];
+static unsigned long pg_end[MAX_VMAS];
+
#define MAX_BIT_FILTERS 64
static int nr_bit_filters;
static uint64_t opt_mask[MAX_BIT_FILTERS];
static int page_size;
-#define PAGES_BATCH (64 << 10) /* 64k pages */
+static int pagemap_fd;
static int kpageflags_fd;
-static uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
+
+static int opt_hwpoison;
+static int opt_unpoison;
+
+static char *hwpoison_debug_fs = "/debug/hwpoison";
+static int hwpoison_inject_fd;
+static int hwpoison_forget_fd;
#define HASH_SHIFT 13
#define HASH_SIZE (1 << HASH_SHIFT)
type __min2 = (y); \
__min1 < __min2 ? __min1 : __min2; })
+#define max_t(type, x, y) ({ \
+ type __max1 = (x); \
+ type __max2 = (y); \
+ __max1 > __max2 ? __max1 : __max2; })
+
static unsigned long pages2mb(unsigned long pages)
{
return (pages * page_size) >> 20;
exit(EXIT_FAILURE);
}
+int checked_open(const char *pathname, int flags)
+{
+ int fd = open(pathname, flags);
+
+ if (fd < 0) {
+ perror(pathname);
+ exit(EXIT_FAILURE);
+ }
+
+ return fd;
+}
+
+/*
+ * pagemap/kpageflags routines
+ */
+
+static unsigned long do_u64_read(int fd, char *name,
+ uint64_t *buf,
+ unsigned long index,
+ unsigned long count)
+{
+ long bytes;
+
+ if (index > ULONG_MAX / 8)
+ fatal("index overflow: %lu\n", index);
+
+ if (lseek(fd, index * 8, SEEK_SET) < 0) {
+ perror(name);
+ exit(EXIT_FAILURE);
+ }
+
+ bytes = read(fd, buf, count * 8);
+ if (bytes < 0) {
+ perror(name);
+ exit(EXIT_FAILURE);
+ }
+ if (bytes % 8)
+ fatal("partial read: %lu bytes\n", bytes);
+
+ return bytes / 8;
+}
+
+static unsigned long kpageflags_read(uint64_t *buf,
+ unsigned long index,
+ unsigned long pages)
+{
+ return do_u64_read(kpageflags_fd, PROC_KPAGEFLAGS, buf, index, pages);
+}
+
+static unsigned long pagemap_read(uint64_t *buf,
+ unsigned long index,
+ unsigned long pages)
+{
+ return do_u64_read(pagemap_fd, "/proc/pid/pagemap", buf, index, pages);
+}
+
+static unsigned long pagemap_pfn(uint64_t val)
+{
+ unsigned long pfn;
+
+ if (val & PM_PRESENT)
+ pfn = PM_PFRAME(val);
+ else
+ pfn = 0;
+
+ return pfn;
+}
+
/*
* page flag names
* page list and summary
*/
-static void show_page_range(unsigned long offset, uint64_t flags)
+static void show_page_range(unsigned long voffset,
+ unsigned long offset, uint64_t flags)
{
static uint64_t flags0;
+ static unsigned long voff;
static unsigned long index;
static unsigned long count;
- if (flags == flags0 && offset == index + count) {
+ if (flags == flags0 && offset == index + count &&
+ (!opt_pid || voffset == voff + count)) {
count++;
return;
}
- if (count)
- printf("%lu\t%lu\t%s\n",
+ if (count) {
+ if (opt_pid)
+ printf("%lx\t", voff);
+ printf("%lx\t%lx\t%s\n",
index, count, page_flag_name(flags0));
+ }
flags0 = flags;
index = offset;
+ voff = voffset;
count = 1;
}
-static void show_page(unsigned long offset, uint64_t flags)
+static void show_page(unsigned long voffset,
+ unsigned long offset, uint64_t flags)
{
- printf("%lu\t%s\n", offset, page_flag_name(flags));
+ if (opt_pid)
+ printf("%lx\t", voffset);
+ printf("%lx\t%s\n", offset, page_flag_name(flags));
}
static void show_summary(void)
return flags;
}
+static uint64_t kpageflags_flags(uint64_t flags)
+{
+ flags = expand_overloaded_flags(flags);
+
+ if (!opt_raw)
+ flags = well_known_flags(flags);
+
+ return flags;
+}
+
+/*
+ * page actions
+ */
+
+static void prepare_hwpoison_fd(void)
+{
+ char buf[100];
+
+ if (opt_hwpoison && !hwpoison_inject_fd) {
+ sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs);
+ hwpoison_inject_fd = checked_open(buf, O_WRONLY);
+ }
+
+ if (opt_unpoison && !hwpoison_forget_fd) {
+ sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+ hwpoison_forget_fd = checked_open(buf, O_WRONLY);
+ }
+}
+
+static int hwpoison_page(unsigned long offset)
+{
+ char buf[100];
+ int len;
+
+ len = sprintf(buf, "0x%lx\n", offset);
+ len = write(hwpoison_inject_fd, buf, len);
+ if (len < 0) {
+ perror("hwpoison inject");
+ return len;
+ }
+ return 0;
+}
+
+static int unpoison_page(unsigned long offset)
+{
+ char buf[100];
+ int len;
+
+ len = sprintf(buf, "0x%lx\n", offset);
+ len = write(hwpoison_forget_fd, buf, len);
+ if (len < 0) {
+ perror("hwpoison forget");
+ return len;
+ }
+ return 0;
+}
/*
* page frame walker
exit(EXIT_FAILURE);
}
-static void add_page(unsigned long offset, uint64_t flags)
+static void add_page(unsigned long voffset,
+ unsigned long offset, uint64_t flags)
{
- flags = expand_overloaded_flags(flags);
-
- if (!opt_raw)
- flags = well_known_flags(flags);
+ flags = kpageflags_flags(flags);
if (!bit_mask_ok(flags))
return;
+ if (opt_hwpoison)
+ hwpoison_page(offset);
+ if (opt_unpoison)
+ unpoison_page(offset);
+
if (opt_list == 1)
- show_page_range(offset, flags);
+ show_page_range(voffset, offset, flags);
else if (opt_list == 2)
- show_page(offset, flags);
+ show_page(voffset, offset, flags);
nr_pages[hash_slot(flags)]++;
total_pages++;
}
-static void walk_pfn(unsigned long index, unsigned long count)
+#define KPAGEFLAGS_BATCH (64 << 10) /* 64k pages */
+static void walk_pfn(unsigned long voffset,
+ unsigned long index,
+ unsigned long count)
{
+ uint64_t buf[KPAGEFLAGS_BATCH];
unsigned long batch;
- unsigned long n;
+ unsigned long pages;
unsigned long i;
- if (index > ULONG_MAX / KPF_BYTES)
- fatal("index overflow: %lu\n", index);
+ while (count) {
+ batch = min_t(unsigned long, count, KPAGEFLAGS_BATCH);
+ pages = kpageflags_read(buf, index, batch);
+ if (pages == 0)
+ break;
+
+ for (i = 0; i < pages; i++)
+ add_page(voffset + i, index + i, buf[i]);
+
+ index += pages;
+ count -= pages;
+ }
+}
- lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
+#define PAGEMAP_BATCH (64 << 10)
+static void walk_vma(unsigned long index, unsigned long count)
+{
+ uint64_t buf[PAGEMAP_BATCH];
+ unsigned long batch;
+ unsigned long pages;
+ unsigned long pfn;
+ unsigned long i;
while (count) {
- batch = min_t(unsigned long, count, PAGES_BATCH);
- n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
- if (n == 0)
+ batch = min_t(unsigned long, count, PAGEMAP_BATCH);
+ pages = pagemap_read(buf, index, batch);
+ if (pages == 0)
break;
- if (n < 0) {
- perror(PROC_KPAGEFLAGS);
- exit(EXIT_FAILURE);
+
+ for (i = 0; i < pages; i++) {
+ pfn = pagemap_pfn(buf[i]);
+ if (pfn)
+ walk_pfn(index + i, pfn, 1);
}
- if (n % KPF_BYTES != 0)
- fatal("partial read: %lu bytes\n", n);
- n = n / KPF_BYTES;
+ index += pages;
+ count -= pages;
+ }
+}
+
+static void walk_task(unsigned long index, unsigned long count)
+{
+ const unsigned long end = index + count;
+ unsigned long start;
+ int i = 0;
+
+ while (index < end) {
- for (i = 0; i < n; i++)
- add_page(index + i, kpageflags_buf[i]);
+ while (pg_end[i] <= index)
+ if (++i >= nr_vmas)
+ return;
+ if (pg_start[i] >= end)
+ return;
- index += batch;
- count -= batch;
+ start = max_t(unsigned long, pg_start[i], index);
+ index = min_t(unsigned long, pg_end[i], end);
+
+ assert(start < index);
+ walk_vma(start, index - start);
}
}
+static void add_addr_range(unsigned long offset, unsigned long size)
+{
+ if (nr_addr_ranges >= MAX_ADDR_RANGES)
+ fatal("too many addr ranges\n");
+
+ opt_offset[nr_addr_ranges] = offset;
+ opt_size[nr_addr_ranges] = min_t(unsigned long, size, ULONG_MAX-offset);
+ nr_addr_ranges++;
+}
+
static void walk_addr_ranges(void)
{
int i;
- kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
- if (kpageflags_fd < 0) {
- perror(PROC_KPAGEFLAGS);
- exit(EXIT_FAILURE);
- }
+ kpageflags_fd = checked_open(PROC_KPAGEFLAGS, O_RDONLY);
if (!nr_addr_ranges)
- walk_pfn(0, ULONG_MAX);
+ add_addr_range(0, ULONG_MAX);
for (i = 0; i < nr_addr_ranges; i++)
- walk_pfn(opt_offset[i], opt_size[i]);
+ if (!opt_pid)
+ walk_pfn(0, opt_offset[i], opt_size[i]);
+ else
+ walk_task(opt_offset[i], opt_size[i]);
close(kpageflags_fd);
}
" -r|--raw Raw mode, for kernel developers\n"
" -a|--addr addr-spec Walk a range of pages\n"
" -b|--bits bits-spec Walk pages with specified bits\n"
-#if 0 /* planned features */
" -p|--pid pid Walk process address space\n"
+#if 0 /* planned features */
" -f|--file filename Walk file address space\n"
#endif
" -l|--list Show page details in ranges\n"
" -L|--list-each Show page details one by one\n"
" -N|--no-summary Don't show summay info\n"
+" -X|--hwpoison hwpoison pages\n"
+" -x|--unpoison unpoison pages\n"
" -h|--help Show this usage message\n"
"addr-spec:\n"
" N one page at offset N (unit: pages)\n"
" N+M pages range from N to N+M-1\n"
" N,M pages range from N to M-1\n"
" N, pages range from N to end\n"
-" ,M pages range from 0 to M\n"
+" ,M pages range from 0 to M-1\n"
"bits-spec:\n"
" bit1,bit2 (flags & (bit1|bit2)) != 0\n"
" bit1,bit2=bit1 (flags & (bit1|bit2)) == bit1\n"
static void parse_pid(const char *str)
{
+ FILE *file;
+ char buf[5000];
+
opt_pid = parse_number(str);
-}
-static void parse_file(const char *name)
-{
+ sprintf(buf, "/proc/%d/pagemap", opt_pid);
+ pagemap_fd = checked_open(buf, O_RDONLY);
+
+ sprintf(buf, "/proc/%d/maps", opt_pid);
+ file = fopen(buf, "r");
+ if (!file) {
+ perror(buf);
+ exit(EXIT_FAILURE);
+ }
+
+ while (fgets(buf, sizeof(buf), file) != NULL) {
+ unsigned long vm_start;
+ unsigned long vm_end;
+ unsigned long long pgoff;
+ int major, minor;
+ char r, w, x, s;
+ unsigned long ino;
+ int n;
+
+ n = sscanf(buf, "%lx-%lx %c%c%c%c %llx %x:%x %lu",
+ &vm_start,
+ &vm_end,
+ &r, &w, &x, &s,
+ &pgoff,
+ &major, &minor,
+ &ino);
+ if (n < 10) {
+ fprintf(stderr, "unexpected line: %s\n", buf);
+ continue;
+ }
+ pg_start[nr_vmas] = vm_start / page_size;
+ pg_end[nr_vmas] = vm_end / page_size;
+ if (++nr_vmas >= MAX_VMAS) {
+ fprintf(stderr, "too many VMAs\n");
+ break;
+ }
+ }
+ fclose(file);
}
-static void add_addr_range(unsigned long offset, unsigned long size)
+static void parse_file(const char *name)
{
- if (nr_addr_ranges >= MAX_ADDR_RANGES)
- fatal("too much addr ranges\n");
-
- opt_offset[nr_addr_ranges] = offset;
- opt_size[nr_addr_ranges] = size;
- nr_addr_ranges++;
}
static void parse_addr_range(const char *optarg)
{ "list" , 0, NULL, 'l' },
{ "list-each" , 0, NULL, 'L' },
{ "no-summary", 0, NULL, 'N' },
+ { "hwpoison" , 0, NULL, 'X' },
+ { "unpoison" , 0, NULL, 'x' },
{ "help" , 0, NULL, 'h' },
{ NULL , 0, NULL, 0 }
};
page_size = getpagesize();
while ((c = getopt_long(argc, argv,
- "rp:f:a:b:lLNh", opts, NULL)) != -1) {
+ "rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
switch (c) {
case 'r':
opt_raw = 1;
case 'N':
opt_no_summary = 1;
break;
+ case 'X':
+ opt_hwpoison = 1;
+ prepare_hwpoison_fd();
+ break;
+ case 'x':
+ opt_unpoison = 1;
+ prepare_hwpoison_fd();
+ break;
case 'h':
usage();
exit(0);
}
}
+ if (opt_list && opt_pid)
+ printf("voffset\t");
if (opt_list == 1)
- printf("offset\tcount\tflags\n");
+ printf("offset\tlen\tflags\n");
if (opt_list == 2)
printf("offset\tflags\n");
walk_addr_ranges();
if (opt_list == 1)
- show_page_range(0, 0); /* drain the buffer */
+ show_page_range(0, 0, 0); /* drain the buffer */
if (opt_no_summary)
return 0;
16. COMPOUND_TAIL
16. HUGE
18. UNEVICTABLE
+ 19. HWPOISON
20. NOPAGE
+ 21. KSM
Short descriptions to the page flags:
17. HUGE
this is an integral part of a HugeTLB page
+19. HWPOISON
+ hardware detected memory corruption on this page: don't touch the data!
+
20. NOPAGE
no page frame exists at the requested address
+21. KSM
+ identical memory pages dynamically shared between one or more processes
+
[IO related page flags]
1. ERROR IO error occurred
3. UPTODATE page has up-to-date data
Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
8. Happy hacking.
- -----------------------------------
-
-Maintainers List (try to look for most precise areas first)
+Descriptions of section entries:
+
+ P: Person (obsolete)
+ M: Mail patches to: FullName <address@domain>
+ L: Mailing list that is relevant to this area
+ W: Web-page with status/info
+ T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
+ S: Status, one of the following:
+ Supported: Someone is actually paid to look after this.
+ Maintained: Someone actually looks after it.
+ Odd Fixes: It has a maintainer but they don't have time to do
+ much other than throw the odd patch in. See below..
+ Orphan: No current maintainer [but maybe you could take the
+ role as you write your new code].
+ Obsolete: Old code. Something tagged obsolete generally means
+ it has been replaced by a better system and you
+ should be using that.
+ F: Files and directories with wildcard patterns.
+ A trailing slash includes all files and subdirectory files.
+ F: drivers/net/ all files in and below drivers/net
+ F: drivers/net/* all files in drivers/net, but not below
+ F: */net/* all files in "any top level directory"/net
+ One pattern per line. Multiple F: lines acceptable.
+ X: Files and directories that are NOT maintained, same rules as F:
+ Files exclusions are tested before file matches.
+ Can be useful for excluding a specific subdirectory, for instance:
+ F: net/
+ X: net/ipv6/
+ matches all files in and below net excluding net/ipv6/
+ K: Keyword perl extended regex pattern to match content in a
+ patch or file. For instance:
+ K: of_get_profile
+ matches patches or files that contain "of_get_profile"
+ K: \b(printk|pr_(info|err))\b
+ matches patches or files that contain one or more of the words
+ printk, pr_info or pr_err
+ One regex pattern per line. Multiple K: lines acceptable.
Note: For the hard of thinking, this list is meant to remain in alphabetical
order. If you could add yourselves to it in alphabetical order that would be
so much easier [Ed]
-P: Person (obsolete)
-M: Mail patches to: FullName <address@domain>
-L: Mailing list that is relevant to this area
-W: Web-page with status/info
-T: SCM tree type and location. Type is one of: git, hg, quilt, stgit.
-S: Status, one of the following:
-
- Supported: Someone is actually paid to look after this.
- Maintained: Someone actually looks after it.
- Odd Fixes: It has a maintainer but they don't have time to do
- much other than throw the odd patch in. See below..
- Orphan: No current maintainer [but maybe you could take the
- role as you write your new code].
- Obsolete: Old code. Something tagged obsolete generally means
- it has been replaced by a better system and you
- should be using that.
+Maintainers List (try to look for most precise areas first)
-F: Files and directories with wildcard patterns.
- A trailing slash includes all files and subdirectory files.
- F: drivers/net/ all files in and below drivers/net
- F: drivers/net/* all files in drivers/net, but not below
- F: */net/* all files in "any top level directory"/net
- One pattern per line. Multiple F: lines acceptable.
-X: Files and directories that are NOT maintained, same rules as F:
- Files exclusions are tested before file matches.
- Can be useful for excluding a specific subdirectory, for instance:
- F: net/
- X: net/ipv6/
- matches all files in and below net excluding net/ipv6/
+ -----------------------------------
3C505 NETWORK DRIVER
M: Philip Blundell <philb@gnu.org>
S: Supported
F: drivers/acpi/fan.c
-ACPI PCI HOTPLUG DRIVER
-M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
-L: linux-pci@vger.kernel.org
+ACPI PROCESSOR AGGREGATOR DRIVER
+M: Shaohua Li <shaohua.li@intel.com>
+L: linux-acpi@vger.kernel.org
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
-F: drivers/pci/hotplug/acpi*
+F: drivers/acpi/acpi_pad.c
ACPI THERMAL DRIVER
M: Zhang Rui <rui.zhang@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/CONTEC MICRO9 MACHINE SUPPORT
+M: Hubert Feurstein <hubert.feurstein@contec.at>
+S: Maintained
+F: arch/arm/mach-ep93xx/micro9.c
+
ARM/CORGI MACHINE SUPPORT
M: Richard Purdie <rpurdie@rpsys.net>
S: Maintained
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
+S: Maintained
ARM/INTEL IOP33X ARM ARCHITECTURE
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
+S: Maintained
ARM/INTEL IOP13XX ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
+S: Maintained
ARM/INTEL IQ81342EX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
+S: Maintained
ARM/INTEL IXP2000 ARM ARCHITECTURE
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/INTEL IXP4XX ARM ARCHITECTURE
+M: Imre Kaloz <kaloz@openwrt.org>
+M: Krzysztof Halasa <khc@pm.waw.pl>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-ixp4xx/
+
ARM/INTEL XSC3 (MANZANO) ARM CORE
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dan Williams <dan.j.williams@intel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Supported
+S: Maintained
ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
M: Dirk Opfer <dirk@opfer-online.de>
S: Maintained
-ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
+ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
M: Marek Vasut <marek.vasut@gmail.com>
+L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
+F: arch/arm/mach-pxa/include/mach/palmtx.h
+F: arch/arm/mach-pxa/palmtx.c
+F: arch/arm/mach-pxa/include/mach/palmt5.h
+F: arch/arm/mach-pxa/palmt5.c
+F: arch/arm/mach-pxa/include/mach/palmld.h
+F: arch/arm/mach-pxa/palmld.c
+F: arch/arm/mach-pxa/include/mach/palmte2.h
+F: arch/arm/mach-pxa/palmte2.c
+F: arch/arm/mach-pxa/include/mach/palmtc.h
+F: arch/arm/mach-pxa/palmtc.c
ARM/PALM TREO 680 SUPPORT
M: Tomas Cech <sleep_walker@suse.cz>
+L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
+F: arch/arm/mach-pxa/include/mach/treo680.h
+F: arch/arm/mach-pxa/treo680.c
ARM/PALMZ72 SUPPORT
M: Sergey Lapin <slapin@ossfans.org>
+L: linux-arm-kernel@lists.infradead.org
W: http://hackndev.com
S: Maintained
+F: arch/arm/mach-pxa/include/mach/palmz72.h
+F: arch/arm/mach-pxa/palmz72.c
ARM/PLEB SUPPORT
M: Peter Chubb <pleb@gelato.unsw.edu.au>
ATM
M: Chas Williams <chas@cmf.nrl.navy.mil>
-L: linux-atm-general@lists.sourceforge.net (subscribers-only)
+L: linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
L: netdev@vger.kernel.org
W: http://linux-atm.sourceforge.net
S: Maintained
S: Supported
F: drivers/net/tg3.*
+BROCADE BFA FC SCSI DRIVER
+P: Jing Huang
+M: huangj@brocade.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+F: drivers/scsi/bfa/
+
BSG (block layer generic sg v4 driver)
M: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
L: linux-scsi@vger.kernel.org
CORETEMP HARDWARE MONITORING DRIVER
M: Rudolf Marek <r.marek@assembler.cz>
+M: Huaxu Wan <huaxu.wan@intel.com>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/coretemp
F: fs/*
FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-M: Riku Voipio <riku.vipio@iki.fi>
+M: Riku Voipio <riku.voipio@iki.fi>
L: lm-sensors@lm-sensors.org
S: Maintained
F: drivers/hwmon/f75375s.c
F: arch/powerpc/sysdev/qe_lib/
F: arch/powerpc/include/asm/*qe.h
-FREESCALE USB PERIPHERIAL DRIVERS
+FREESCALE USB PERIPHERAL DRIVERS
M: Li Yang <leoli@freescale.com>
L: linux-usb@vger.kernel.org
L: linuxppc-dev@ozlabs.org
F: fs/fscache/
F: include/linux/fscache*.h
-TRACING
-M: Steven Rostedt <rostedt@goodmis.org>
-M: Frederic Weisbecker <fweisbec@gmail.com>
-M: Ingo Molnar <mingo@redhat.com>
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
-S: Maintained
-F: Documentation/trace/ftrace.txt
-F: arch/*/*/*/ftrace.h
-F: arch/*/kernel/ftrace.c
-F: include/*/ftrace.h include/trace/ include/linux/trace*.h
-F: kernel/trace/
-
FUJITSU FR-V (FRV) PORT
M: David Howells <dhowells@redhat.com>
S: Maintained
F: include/asm-generic
GENERIC UIO DRIVER FOR PCI DEVICES
-M: Michael S. Tsirkin <mst@redhat.com>
+M: "Michael S. Tsirkin" <mst@redhat.com>
L: kvm@vger.kernel.org
-L: linux-kernel@vger.kernel.org
S: Supported
F: drivers/uio/uio_pci_generic.c
F: drivers/hwmon/
HARDWARE RANDOM NUMBER GENERATOR CORE
-S: Orphan
+M: Matt Mackall <mpm@selenic.com>
+M: Herbert Xu <herbert@gondor.apana.org.au>
+S: Odd fixes
F: Documentation/hw_random.txt
F: drivers/char/hw_random/
F: include/linux/hw_random.h
W: http://www.linux1394.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
S: Maintained
+F: Documentation/debugging-via-ohci1394.txt
F: drivers/ieee1394/
IEEE 1394 RAW I/O DRIVER
INTEL IOP-ADMA DMA DRIVER
M: Dan Williams <dan.j.williams@intel.com>
-S: Supported
+S: Maintained
F: drivers/dma/iop-adma.c
INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
KERNEL JANITORS
L: kernel-janitors@vger.kernel.org
-W: http://www.kerneljanitors.org/
-S: Maintained
+W: http://janitor.kernelnewbies.org/
+S: Odd Fixes
KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
M: "J. Bruce Fields" <bfields@fieldses.org>
F: drivers/block/nbd.c
F: include/linux/nbd.h
+NETWORK DROP MONITOR
+M: Neil Horman <nhorman@tuxdriver.com>
+L: netdev@vger.kernel.org
+S: Maintained
+W: https://fedorahosted.org/dropwatch/
+F: net/core/drop_monitor.c
+
NETWORKING [GENERAL]
M: "David S. Miller" <davem@davemloft.net>
L: netdev@vger.kernel.org
W: http://www.linuxfoundation.org/en/Net
+W: http://patchwork.ozlabs.org/project/netdev/list/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
S: Maintained
F: net/
F: drivers/video/nvidia/
OMAP SUPPORT
-M: "Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
+M: Tony Lindgren <tony@atomide.com>
L: linux-omap@vger.kernel.org
W: http://www.muru.com/linux/omap/
W: http://linux.omap.com/
F: Documentation/i2c/busses/i2c-ocores
F: drivers/i2c/busses/i2c-ocores.c
+OPEN FIRMWARE AND FLATTENED DEVICE TREE
+M: Grant Likely <grant.likely@secretlab.ca>
+L: devicetree-discuss@lists.ozlabs.org
+W: http://fdt.secretlab.ca
+S: Maintained
+F: drivers/of
+F: include/linux/of*.h
+K: of_get_property
+
OPROFILE
M: Robert Richter <robert.richter@amd.com>
L: oprofile-list@lists.sf.net
PARISC ARCHITECTURE
M: Kyle McMartin <kyle@mcmartin.ca>
M: Helge Deller <deller@gmx.de>
+M: "James E.J. Bottomley" <jejb@parisc-linux.org>
L: linux-parisc@vger.kernel.org
W: http://www.parisc-linux.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
F: drivers/pci/
F: include/linux/pci*
-PCIE HOTPLUG DRIVER
-M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
+PCI HOTPLUG
+M: Jesse Barnes <jbarnes@virtuousgeek.org>
L: linux-pci@vger.kernel.org
S: Supported
-F: drivers/pci/pcie/
+F: drivers/pci/hotplug
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
M: Paul Mackerras <paulus@samba.org>
M: Ingo Molnar <mingo@elte.hu>
S: Supported
+F: kernel/perf_event.c
+F: include/linux/perf_event.h
+F: arch/*/*/kernel/perf_event.c
+F: arch/*/include/asm/perf_event.h
+F: arch/*/lib/perf_event.c
+F: arch/*/kernel/perf_callchain.c
+F: tools/perf/
PERSONALITY HANDLING
M: Christoph Hellwig <hch@infradead.org>
RALINK RT2X00 WIRELESS LAN DRIVER
P: rt2x00 project
L: linux-wireless@vger.kernel.org
-L: users@rt2x00.serialmonkey.com
+L: users@rt2x00.serialmonkey.com (moderated for non-subscribers)
W: http://rt2x00.serialmonkey.com/
S: Maintained
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
F: include/linux/sched.h
SCORE ARCHITECTURE
-P: Chen Liqin
-M: liqin.chen@sunplusct.com
-P: Lennox Wu
-M: lennox.wu@gmail.com
+M: Chen Liqin <liqin.chen@sunplusct.com>
+M: Lennox Wu <lennox.wu@gmail.com>
W: http://www.sunplusct.com
S: Supported
+F: arch/score/
SCSI CDROM DRIVER
M: Jens Axboe <axboe@kernel.dk>
F: drivers/mmc/host/sdricoh_cs.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S: Orphan
-L: linux-mmc@vger.kernel.org
-F: drivers/mmc/host/sdhci.*
+S: Orphan
+L: linux-mmc@vger.kernel.org
+F: drivers/mmc/host/sdhci.*
SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
M: Anton Vorontsov <avorontsov@ru.mvista.com>
L: linuxppc-dev@ozlabs.org
-L: linux-mmc@vger.kernel.org
+L: linux-mmc@vger.kernel.org
S: Maintained
-F: drivers/mmc/host/sdhci-of.*
+F: drivers/mmc/host/sdhci-of.*
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
M: Ben Dooks <ben-linux@fluff.org>
-L: linux-mmc@vger.kernel.org
+L: linux-mmc@vger.kernel.org
S: Maintained
F: drivers/mmc/host/sdhci-s3c.c
F: include/linux/ata.h
F: include/linux/libata.h
+SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
+P: Jayamohan Kallickal
+M: jayamohank@serverengines.com
+L: linux-scsi@vger.kernel.org
+W: http://www.serverengines.com
+S: Supported
+F: drivers/scsi/be2iscsi/
+
SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
M: Sathya Perla <sathyap@serverengines.com>
M: Subbu Seetharaman <subbus@serverengines.com>
F: drivers/usb/gadget/lh7a40*
F: drivers/usb/host/ohci-lh7a40*
-SHPC HOTPLUG DRIVER
-M: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
-L: linux-pci@vger.kernel.org
-S: Supported
-F: drivers/pci/hotplug/shpchp*
-
SIMPLE FIRMWARE INTERFACE (SFI)
-P: Len Brown
-M: lenb@kernel.org
+M: Len Brown <lenb@kernel.org>
L: sfi-devel@simplefirmware.org
W: http://simplefirmware.org/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
F: drivers/sfi/
F: include/linux/sfi*.h
-
SIMTEC EB110ATX (Chalice CATS)
P: Ben Dooks
M: Vincent Sanders <support@simtec.co.uk>
S: Maintained
F: drivers/char/tpm/
+TRACING
+M: Steven Rostedt <rostedt@goodmis.org>
+M: Frederic Weisbecker <fweisbec@gmail.com>
+M: Ingo Molnar <mingo@redhat.com>
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+S: Maintained
+F: Documentation/trace/ftrace.txt
+F: arch/*/*/*/ftrace.h
+F: arch/*/kernel/ftrace.c
+F: include/*/ftrace.h
+F: include/linux/trace*.h
+F: include/trace/
+F: kernel/trace/
+
TRIVIAL PATCHES
M: Jiri Kosina <trivial@kernel.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
F: drivers/vlynq/vlynq.c
F: include/linux/vlynq.h
+VMWARE VMXNET3 ETHERNET DRIVER
+M: Shreyas Bhatewara <sbhatewara@vmware.com>
+M: VMware, Inc. <pv-drivers@vmware.com>
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/vmxnet3/
+
VOLTAGE AND CURRENT REGULATOR FRAMEWORK
M: Liam Girdwood <lrg@slimlogic.co.uk>
M: Mark Brown <broonie@opensource.wolfsonmicro.com>
F: drivers/scsi/wd7000.c
WINBOND CIR DRIVER
-P: David Härdeman
-M: david@hardeman.nu
+M: David Härdeman <david@hardeman.nu>
S: Maintained
F: drivers/input/misc/winbond-cir.c
F: include/linux/wm97xx.h
WOLFSON MICROELECTRONICS PMIC DRIVERS
-P: Mark Brown
-M: broonie@opensource.wolfsonmicro.com
-L: linux-kernel@vger.kernel.org
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
T: git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
W: http://opensource.wolfsonmicro.com/node/8
S: Supported
VERSION = 2
PATCHLEVEL = 6
-SUBLEVEL = 31
-EXTRAVERSION =
+SUBLEVEL = 32
+EXTRAVERSION = -rc6
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
OBJDUMP = $(CROSS_COMPILE)objdump
AWK = awk
GENKSYMS = scripts/genksyms/genksyms
+INSTALLKERNEL := installkernel
DEPMOD = /sbin/depmod
KALLSYMS = scripts/kallsyms
PERL = perl
export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION
export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC
-export CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE
+export CPP AR NM STRIP OBJCOPY OBJDUMP
+export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE
export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
# revert to pre-gcc-4.4 behaviour of .eh_frame
KBUILD_CFLAGS += $(call cc-option,-fno-dwarf2-cfi-asm)
+# conserve stack if available
+KBUILD_CFLAGS += $(call cc-option,-fconserve-stack)
+
# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
# But warn user when we do so
warn-assign = \
# Use --build-id when available.
LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\
- $(call ld-option, -Wl$(comma)--build-id,))
+ $(call cc-ldoption, -Wl$(comma)--build-id,))
LDFLAGS_MODULE += $(LDFLAGS_BUILD_ID)
LDFLAGS_vmlinux += $(LDFLAGS_BUILD_ID)
ifeq ($(CONFIG_STRIP_ASM_SYMS),y)
-LDFLAGS_vmlinux += -X
+LDFLAGS_vmlinux += $(call ld-option, -X,)
endif
# Default kernel image to build when no specific target is given.
# All the preparing..
prepare: prepare0
-# Leave this as default for preprocessing vmlinux.lds.S, which is now
-# done in arch/$(ARCH)/kernel/Makefile
-
-export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
-
# The asm symlink changes when $(ARCH) changes.
# Detect this and ask user to run make mrproper
# If asm is a stale symlink (point to dir that does not exist) remove it
#define F_GETOWN 6 /* for sockets. */
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
+#define F_SETOWN_EX 12
+#define F_GETOWN_EX 13
/* for posix fcntl() and lockf() */
#define F_RDLCK 1
extern int smp_num_cpus;
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#else /* CONFIG_SMP */
return node;
}
-static inline cpumask_t node_to_cpumask(int node)
-{
- cpumask_t node_cpu_mask = CPU_MASK_NONE;
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (cpu_to_node(cpu) == node)
- cpu_set(cpu, node_cpu_mask);
- }
-
-#ifdef DEBUG_NUMA
- printk("node %d: cpu_mask: %016lx\n", node, node_cpu_mask);
-#endif
-
- return node_cpu_mask;
-}
-
extern struct cpumask node_to_cpumask_map[];
/* FIXME: This is dumb, recalculating every time. But simple. */
static const struct cpumask *cpumask_of_node(int node)
return &node_to_cpumask_map[node];
}
-#define pcibus_to_cpumask(bus) (cpu_online_map)
#define cpumask_of_pcibus(bus) (cpu_online_mask)
#endif /* !CONFIG_NUMA */
{
struct marvel_agp_aperture *aper = agp->aperture.sysdata;
return iommu_bind(aper->arena, aper->pg_start + pg_start,
- mem->page_count, mem->memory);
+ mem->page_count, mem->pages);
}
static int
{
struct titan_agp_aperture *aper = agp->aperture.sysdata;
return iommu_bind(aper->arena, aper->pg_start + pg_start,
- mem->page_count, mem->memory);
+ mem->page_count, mem->pages);
}
static int
struct task_struct init_task = INIT_TASK(init_task);
EXPORT_SYMBOL(init_task);
-union thread_union init_thread_union
- __attribute__((section(".data.init_thread")))
- = { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
extern int iommu_reserve(struct pci_iommu_arena *, long, long);
extern int iommu_release(struct pci_iommu_arena *, long, long);
-extern int iommu_bind(struct pci_iommu_arena *, long, long, unsigned long *);
+extern int iommu_bind(struct pci_iommu_arena *, long, long, struct page **);
extern int iommu_unbind(struct pci_iommu_arena *, long, long);
int
iommu_bind(struct pci_iommu_arena *arena, long pg_start, long pg_count,
- unsigned long *physaddrs)
+ struct page **pages)
{
unsigned long flags;
unsigned long *ptes;
}
for(i = 0, j = pg_start; i < pg_count; i++, j++)
- ptes[j] = mk_iommu_pte(physaddrs[i]);
+ ptes[j] = mk_iommu_pte(page_to_phys(pages[i]));
spin_unlock_irqrestore(&arena->lock, flags);
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/user.h>
-#include <linux/utsname.h>
#include <linux/time.h>
#include <linux/major.h>
#include <linux/stat.h>
\f
static void
-send_ipi_message(cpumask_t to_whom, enum ipi_message_type operation)
+send_ipi_message(const struct cpumask *to_whom, enum ipi_message_type operation)
{
int i;
mb();
- for_each_cpu_mask(i, to_whom)
+ for_each_cpu(i, to_whom)
set_bit(operation, &ipi_data[i].bits);
mb();
- for_each_cpu_mask(i, to_whom)
+ for_each_cpu(i, to_whom)
wripir(i);
}
printk(KERN_WARNING
"smp_send_reschedule: Sending IPI to self.\n");
#endif
- send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+ send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
void
if (hard_smp_processor_id() != boot_cpu_id)
printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n");
#endif
- send_ipi_message(to_whom, IPI_CPU_STOP);
+ send_ipi_message(&to_whom, IPI_CPU_STOP);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_CALL_FUNC);
}
void arch_send_call_function_single_ipi(int cpu)
{
- send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+ send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
}
static void
#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
#include <asm/page.h>
OUTPUT_FORMAT("elf64-alpha")
} :kernel
RODATA
-
- /* Exception table */
- . = ALIGN(16);
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
/* Will be freed after init */
- . = ALIGN(PAGE_SIZE);
- /* Init code and data */
- __init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : {
- INIT_DATA
- }
-
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
-
- . = ALIGN(8);
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
-
- . = ALIGN(8);
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
-
- . = ALIGN(8);
- SECURITY_INIT
-
+ __init_begin = ALIGN(PAGE_SIZE);
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
PERCPU(PAGE_SIZE)
-
- . = ALIGN(2 * PAGE_SIZE);
+ /* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
+ needed for the THREAD_SIZE aligned init_task gets freed after init */
+ . = ALIGN(THREAD_SIZE);
__init_end = .;
/* Freed after init ends here */
- /* Note 2 page alignment above. */
- .data.init_thread : {
- *(.data.init_thread)
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : {
- *(.data.page_aligned)
- }
-
- . = ALIGN(64);
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
-
_data = .;
- /* Data */
- .data : {
- DATA_DATA
- CONSTRUCTORS
- }
+ RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
.got : {
*(.got)
}
_edata = .; /* End of data section */
- __bss_start = .;
- .sbss : {
- *(.sbss)
- *(.scommon)
- }
- .bss : {
- *(.bss)
- *(COMMON)
- }
- __bss_stop = .;
+ BSS_SECTION(0, 0, 0)
_end = .;
.mdebug 0 : {
depends on GENERIC_CLOCKEVENTS
default y if SMP && !LOCAL_TIMERS
+config HAVE_TCM
+ bool
+ select GENERIC_ALLOCATOR
+
config NO_IOPORT
bool
bool "ST-Ericsson U300 Series"
depends on MMU
select CPU_ARM926T
+ select HAVE_TCM
select ARM_AMBA
select ARM_VIC
select GENERIC_TIME
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
-CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
+
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
#KBUILD_CFLAGS +=-pipe
echo ' (supply initrd image via make variable INITRD=<path>)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
- echo ' Install using (your) ~/bin/installkernel or'
- echo ' (distribution) /sbin/installkernel or'
+ echo ' Install using (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
endef
#
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
if [ "$(basename $2)" = "zImage" ]; then
# Compressed install
spin_unlock_irqrestore(&lchip->lock, flags);
}
+EXPORT_SYMBOL(locomo_gpio_set_dir);
int locomo_gpio_read_level(struct device *dev, unsigned int bits)
{
ret &= bits;
return ret;
}
+EXPORT_SYMBOL(locomo_gpio_read_level);
int locomo_gpio_read_output(struct device *dev, unsigned int bits)
{
ret &= bits;
return ret;
}
+EXPORT_SYMBOL(locomo_gpio_read_output);
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
{
spin_unlock_irqrestore(&lchip->lock, flags);
}
+EXPORT_SYMBOL(locomo_gpio_write);
static void locomo_m62332_sendbit(void *mapbase, int bit)
{
spin_unlock_irqrestore(&lchip->lock, flags);
}
+EXPORT_SYMBOL(locomo_m62332_senddata);
/*
* Frontlight control
*/
-static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
-
void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
{
unsigned long flags;
driver->drv.bus = &locomo_bus_type;
return driver_register(&driver->drv);
}
+EXPORT_SYMBOL(locomo_driver_register);
void locomo_driver_unregister(struct locomo_driver *driver)
{
driver_unregister(&driver->drv);
}
+EXPORT_SYMBOL(locomo_driver_unregister);
static int __init locomo_init(void)
{
MODULE_DESCRIPTION("Sharp LoCoMo core driver");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
-
-EXPORT_SYMBOL(locomo_driver_register);
-EXPORT_SYMBOL(locomo_driver_unregister);
-EXPORT_SYMBOL(locomo_gpio_set_dir);
-EXPORT_SYMBOL(locomo_gpio_read_level);
-EXPORT_SYMBOL(locomo_gpio_read_output);
-EXPORT_SYMBOL(locomo_gpio_write);
-EXPORT_SYMBOL(locomo_m62332_senddata);
return __sa1111_pll_clock(sachip);
}
+EXPORT_SYMBOL(sa1111_pll_clock);
/**
* sa1111_select_audio_mode - select I2S or AC link mode
spin_unlock_irqrestore(&sachip->lock, flags);
}
+EXPORT_SYMBOL(sa1111_select_audio_mode);
/**
* sa1111_set_audio_rate - set the audio sample rate
return 0;
}
+EXPORT_SYMBOL(sa1111_set_audio_rate);
/**
* sa1111_get_audio_rate - get the audio sample rate
return __sa1111_pll_clock(sachip) / (256 * div);
}
+EXPORT_SYMBOL(sa1111_get_audio_rate);
void sa1111_set_io_dir(struct sa1111_dev *sadev,
unsigned int bits, unsigned int dir,
MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
spin_unlock_irqrestore(&sachip->lock, flags);
}
+EXPORT_SYMBOL(sa1111_set_io_dir);
void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
{
MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
spin_unlock_irqrestore(&sachip->lock, flags);
}
+EXPORT_SYMBOL(sa1111_set_io);
void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
{
MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
spin_unlock_irqrestore(&sachip->lock, flags);
}
+EXPORT_SYMBOL(sa1111_set_sleep_io);
/*
* Individual device operations.
sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
}
+EXPORT_SYMBOL(sa1111_enable_device);
/**
* sa1111_disable_device - disable an on-chip SA1111 function block
sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
spin_unlock_irqrestore(&sachip->lock, flags);
}
+EXPORT_SYMBOL(sa1111_disable_device);
/*
* SA1111 "Register Access Bus."
.suspend = sa1111_bus_suspend,
.resume = sa1111_bus_resume,
};
+EXPORT_SYMBOL(sa1111_bus_type);
int sa1111_driver_register(struct sa1111_driver *driver)
{
driver->drv.bus = &sa1111_bus_type;
return driver_register(&driver->drv);
}
+EXPORT_SYMBOL(sa1111_driver_register);
void sa1111_driver_unregister(struct sa1111_driver *driver)
{
driver_unregister(&driver->drv);
}
+EXPORT_SYMBOL(sa1111_driver_unregister);
static int __init sa1111_init(void)
{
MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sa1111_select_audio_mode);
-EXPORT_SYMBOL(sa1111_set_audio_rate);
-EXPORT_SYMBOL(sa1111_get_audio_rate);
-EXPORT_SYMBOL(sa1111_set_io_dir);
-EXPORT_SYMBOL(sa1111_set_io);
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-EXPORT_SYMBOL(sa1111_enable_device);
-EXPORT_SYMBOL(sa1111_disable_device);
-EXPORT_SYMBOL(sa1111_pll_clock);
-EXPORT_SYMBOL(sa1111_bus_type);
-EXPORT_SYMBOL(sa1111_driver_register);
-EXPORT_SYMBOL(sa1111_driver_unregister);
#include <linux/list.h>
#include <linux/io.h>
#include <linux/sysdev.h>
+#include <linux/device.h>
#include <linux/amba/bus.h>
#include <asm/mach/irq.h>
# CONFIG_SA1100_COLLIE is not set
# CONFIG_SA1100_H3100 is not set
CONFIG_SA1100_H3600=y
-CONFIG_SA1100_H3XXX=y
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HACKKIT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:27 2007
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 13:41:41 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
CONFIG_ARCH_IOP33X=y
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-CONFIG_IOP3XX_ATU=y
#
# IOP33x Implementation Options
#
CONFIG_ARCH_IQ80331=y
CONFIG_MACH_IQ80332=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_IOP=y
#
CONFIG_CPU_XSCALE=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
# CONFIG_IWMMXT is not set
CONFIG_XSCALE_PMU=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
# Power management options
#
# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
#
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_REDBOOT_PARTS_READONLY=y
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
#
# Serial drivers
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
-# I2C Algorithms
+# I2C Hardware Bus support
#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
-# I2C Hardware Bus support
+# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IOP3XX=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IOP3XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# SPI support
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
#
#
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# DMA Clients
#
CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
#
# Kernel hacking
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Fri Dec 21 11:06:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-CONFIG_MACH_LITTLETON=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
CONFIG_ZBOOT_ROM_TEXT=0x10C08000
CONFIG_ZBOOT_ROM_BSS=0x10200000
# CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
CONFIG_TWL4030_USB=y
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc1
+# Mon Jul 13 22:48:49 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+CONFIG_CPU_PXA930=y
+CONFIG_CPU_PXA935=y
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+CONFIG_MACH_ZYLONITE=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_PXA930_ROTARY=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_MOUSE_PXA930_TRKBALL=y
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MAX7301=y
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_DA903X=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=m
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_AIO is not set
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_U300=y
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
#
# ST-Ericsson AB U300/U330/U335/U365 Platform
CONFIG_MACH_U300_DUAL_RAM=y
CONFIG_U300_DEBUG=y
# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
#
# All the settings below must match the bootloader's settings
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_COMMON_CLKDEV=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
#
CONFIG_MMC_ARMMMCI=y
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 09:02:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=".xcep-itech"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_MACH_XCEP=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+CONFIG_SENSORS_MAX6650=m
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Tue Oct 23 13:33:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ZYLONITE=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
#ifdef __KERNEL__
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
#define atomic_read(v) ((v)->counter)
+#define atomic_set(v,i) (((v)->counter) = (i))
#if __LINUX_ARM_ARCH__ >= 6
/*
* ARMv6 UP and SMP safe atomic ops. We use load exclusive and
* store exclusive to ensure that these are atomic. We may loop
- * to ensure that the update happens. Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
+ * to ensure that the update happens.
*/
-static inline void atomic_set(atomic_t *v, int i)
-{
- unsigned long tmp;
-
- __asm__ __volatile__("@ atomic_set\n"
-"1: ldrex %0, [%1]\n"
-" strex %0, %2, [%1]\n"
-" teq %0, #0\n"
-" bne 1b"
- : "=&r" (tmp)
- : "r" (&v->counter), "r" (i)
- : "cc");
-}
-
static inline void atomic_add(int i, atomic_t *v)
{
unsigned long tmp;
#error SMP not supported on pre-ARMv6 CPUs
#endif
-#define atomic_set(v,i) (((v)->counter) = (i))
-
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long flags;
*p = res | mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
static inline int
*p = res & ~mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
static inline int
*p = res ^ mask;
raw_local_irq_restore(flags);
- return res & mask;
+ return (res & mask) != 0;
}
#include <asm-generic/bitops/non-atomic.h>
#ifndef __ASMARM_CACHE_H
#define __ASMARM_CACHE_H
-#define L1_CACHE_SHIFT 5
+#define L1_CACHE_SHIFT CONFIG_ARM_L1_CACHE_SHIFT
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
/*
#ifndef CONFIG_CPU_CACHE_VIPT
static inline void flush_cache_mm(struct mm_struct *mm)
{
- if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
__cpuc_flush_user_all();
}
static inline void
flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
vma->vm_flags);
}
static inline void
flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = user_addr & PAGE_MASK;
__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
}
unsigned long uaddr, void *kaddr,
unsigned long len, int write)
{
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = (unsigned long)kaddr;
__cpuc_coherent_kern_range(addr, addr + len);
}
static inline void __flush_icache_all(void)
{
+#ifdef CONFIG_ARM_ERRATA_411920
+ extern void v6_icache_inval_all(void);
+ v6_icache_inval_all();
+#else
asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n"
:
: "r" (0));
+#endif
}
#define ARCH_HAS_FLUSH_ANON_PAGE
return read_cpuid(CPUID_CACHETYPE);
}
+static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
+{
+ return read_cpuid(CPUID_TCM);
+}
+
/*
* Intel's XScale3 core supports some v6 features (supersections, L2)
* but advertises itself as v5 as it does not support the v6 ISA. For
#else
static inline int cpu_is_xsc3(void)
{
- if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+ unsigned int id;
+ id = read_cpuid_id() & 0xffffe000;
+ /* It covers both Intel ID and Marvell ID */
+ if ((id == 0x69056000) || (id == 0x56056000))
return 1;
return 0;
extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
#endif
/*
- * Prefetch abort handler. If the CPU has an IFAR use that, otherwise
- * use the address of the aborted instruction
+ * Prefetch Abort Model
+ * ================
+ *
+ * We have the following to choose from:
+ * legacy - no IFSR, no IFAR
+ * v6 - ARMv6: IFSR, no IFAR
+ * v7 - ARMv7: IFSR and IFAR
*/
+
#undef CPU_PABORT_HANDLER
#undef MULTI_PABORT
-#ifdef CONFIG_CPU_PABRT_IFAR
+#ifdef CONFIG_CPU_PABRT_LEGACY
+# ifdef CPU_PABORT_HANDLER
+# define MULTI_PABORT 1
+# else
+# define CPU_PABORT_HANDLER legacy_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V6
# ifdef CPU_PABORT_HANDLER
# define MULTI_PABORT 1
# else
-# define CPU_PABORT_HANDLER(reg, insn) mrc p15, 0, reg, cr6, cr0, 2
+# define CPU_PABORT_HANDLER v6_pabort
# endif
#endif
-#ifdef CONFIG_CPU_PABRT_NOIFAR
+#ifdef CONFIG_CPU_PABRT_V7
# ifdef CPU_PABORT_HANDLER
# define MULTI_PABORT 1
# else
-# define CPU_PABORT_HANDLER(reg, insn) mov reg, insn
+# define CPU_PABORT_HANDLER v7_pabort
# endif
#endif
void *ptr;
};
+/* No support for p+q operations */
+static inline int
+iop_chan_pq_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+ BUG();
+ return 0;
+}
+
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ BUG();
+}
+
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+ BUG();
+}
+
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+ dma_addr_t addr, unsigned char coef)
+{
+ BUG();
+}
+
+static inline int
+iop_chan_pq_zero_sum_slot_count(size_t len, int src_cnt, int *slots_per_op)
+{
+ BUG();
+ return 0;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ BUG();
+}
+
+static inline void
+iop_desc_set_pq_zero_sum_byte_count(struct iop_adma_desc_slot *desc, u32 len)
+{
+ BUG();
+}
+
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+ dma_addr_t *src)
+{
+ BUG();
+}
+
static inline int iop_adma_get_max_xor(void)
{
return 32;
}
+static inline int iop_adma_get_max_pq(void)
+{
+ BUG();
+ return 0;
+}
+
static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
{
int id = chan->device->id;
return slot_cnt;
}
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+ return 0;
+}
+
static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
return 0;
}
+
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan)
+{
+ BUG();
+ return 0;
+}
+
static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
hw_desc->src[0] = val;
}
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
{
struct iop3xx_desc_aau *hw_desc = desc->hw_desc;
struct iop3xx_aau_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
iop_paranoia(!(desc_ctrl.tx_complete && desc_ctrl.zero_result_en));
- return desc_ctrl.zero_result_err;
+ return desc_ctrl.zero_result_err << SUM_CHECK_P;
}
static inline void iop_chan_append(struct iop_adma_chan *chan)
* IOP3XX I/O and Mem space regions for PCI autoconfiguration
*/
#define IOP3XX_PCI_LOWER_MEM_PA 0x80000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000
#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000
#define IOP3XX_PCI_LOWER_IO_PA 0x90000000
* @idx: pool index
* @unmap_src_cnt: number of xor sources
* @unmap_len: transaction bytecount
+ * @tx_list: list of descriptors that are associated with one operation
* @async_tx: support for the async_tx api
* @group_list: list of slots that make up a multi-descriptor transaction
* for example transfer lengths larger than the supported hw max
u16 idx;
u16 unmap_src_cnt;
size_t unmap_len;
+ struct list_head tx_list;
struct dma_async_tx_descriptor async_tx;
union {
u32 *xor_check_result;
u32 *crc32_result;
+ u32 *pq_check_result;
};
};
+++ /dev/null
-/*
- * arch/arm/include/asm/mach/mmc.h
- */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct mmc_platform_data {
- unsigned int ocr_mask; /* available voltages */
- u32 (*translate_vdd)(struct device *, unsigned int);
- unsigned int (*status)(struct device *);
- int gpio_wp;
- int gpio_cd;
-};
-
-#endif
#ifdef CONFIG_SMP
/* check for possible thread migration */
- if (!cpus_empty(next->cpu_vm_mask) && !cpu_isset(cpu, next->cpu_vm_mask))
+ if (!cpumask_empty(mm_cpumask(next)) &&
+ !cpumask_test_cpu(cpu, mm_cpumask(next)))
__flush_icache_all();
#endif
- if (!cpu_test_and_set(cpu, next->cpu_vm_mask) || prev != next) {
+ if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)) || prev != next) {
check_context(next);
cpu_switch_mm(next->pgd, next);
if (cache_is_vivt())
- cpu_clear(cpu, prev->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
}
#endif
}
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
* show local interrupt info
--- /dev/null
+/*
+ * ARM specific SMP header, this contains our implementation
+ * details.
+ */
+#ifndef __ASMARM_SMP_PLAT_H
+#define __ASMARM_SMP_PLAT_H
+
+#include <asm/cputype.h>
+
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
+#endif
--- /dev/null
+/*
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#ifndef __ASMARM_TCM_H
+#define __ASMARM_TCM_H
+
+#ifndef CONFIG_HAVE_TCM
+#error "You should not be including tcm.h unless you have a TCM!"
+#endif
+
+#include <linux/compiler.h>
+
+/* Tag variables with this */
+#define __tcmdata __section(.tcm.data)
+/* Tag constants with this */
+#define __tcmconst __section(.tcm.rodata)
+/* Tag functions inside TCM called from outside TCM with this */
+#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
+/* Tag function inside TCM called from inside TCM with this */
+#define __tcmlocalfunc __section(.tcm.text)
+
+void *tcm_alloc(size_t len);
+void tcm_free(void *addr, size_t len);
+
+#endif
if (tlb_flag(TLB_WB))
dsb();
- if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
if (tlb_flag(TLB_V3_FULL))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_U_FULL))
if (tlb_flag(TLB_V4_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
}
+ put_cpu();
if (tlb_flag(TLB_V6_U_ASID))
asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_WB))
dsb();
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
if (tlb_flag(TLB_V3_PAGE))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_V4_U_PAGE))
#define ARM(x...)
#define THUMB(x...) x
+#ifdef __ASSEMBLY__
#define W(instr) instr.w
+#endif
#define BSYM(sym) sym + 1
#else /* !CONFIG_THUMB2_KERNEL */
#define ARM(x...) x
#define THUMB(x...)
+#ifdef __ASSEMBLY__
#define W(instr) instr
+#endif
#define BSYM(sym) sym
#endif /* CONFIG_THUMB2_KERNEL */
* Unimplemented (or alternatively implemented) syscalls
*/
#define __IGNORE_fadvise64_64 1
+#define __IGNORE_migrate_pages 1
#endif /* __KERNEL__ */
#endif /* __ASM_ARM_UNISTD_H */
# Makefile for the linux kernel.
#
-AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
+CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
+AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
ifdef CONFIG_DYNAMIC_FTRACE
CFLAGS_REMOVE_ftrace.o = -pg
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_ARM_UNWIND) += unwind.o
+obj-$(CONFIG_HAVE_TCM) += tcm.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
@
@ r0 - instruction
@
+#ifndef CONFIG_THUMB2_KERNEL
ldr r0, [r2, #-4]
+#else
+ ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2
+ and r9, r0, #0xf800
+ cmp r9, #0xe800 @ 32-bit instruction if xx >= 0
+ ldrhhs r9, [r2] @ bottom 16 bits
+ orrhs r0, r9, r0, lsl #16
+#endif
adr r9, BSYM(1f)
bl call_fpe
tst r3, #PSR_I_BIT
biceq r9, r9, #PSR_I_BIT
- @
- @ set args, then call main handler
- @
- @ r0 - address of faulting instruction
- @ r1 - pointer to registers on stack
- @
-#ifdef MULTI_PABORT
mov r0, r2 @ pass address of aborted instruction.
+#ifdef MULTI_PABORT
ldr r4, .LCprocfns
mov lr, pc
ldr pc, [r4, #PROCESSOR_PABT_FUNC]
#else
- CPU_PABORT_HANDLER(r0, r2)
+ bl CPU_PABORT_HANDLER
#endif
msr cpsr_c, r9 @ Maybe enable interrupts
- mov r1, sp @ regs
+ mov r2, sp @ regs
bl do_PrefetchAbort @ call abort handler
@
THUMB( add pc, r8 )
nop
- W(mov) pc, lr @ CP#0
+ movw_pc lr @ CP#0
W(b) do_fpe @ CP#1 (FPE)
W(b) do_fpe @ CP#2 (FPE)
- W(mov) pc, lr @ CP#3
+ movw_pc lr @ CP#3
#ifdef CONFIG_CRUNCH
b crunch_task_enable @ CP#4 (MaverickCrunch)
b crunch_task_enable @ CP#5 (MaverickCrunch)
b crunch_task_enable @ CP#6 (MaverickCrunch)
#else
- W(mov) pc, lr @ CP#4
- W(mov) pc, lr @ CP#5
- W(mov) pc, lr @ CP#6
+ movw_pc lr @ CP#4
+ movw_pc lr @ CP#5
+ movw_pc lr @ CP#6
#endif
- W(mov) pc, lr @ CP#7
- W(mov) pc, lr @ CP#8
- W(mov) pc, lr @ CP#9
+ movw_pc lr @ CP#7
+ movw_pc lr @ CP#8
+ movw_pc lr @ CP#9
#ifdef CONFIG_VFP
W(b) do_vfp @ CP#10 (VFP)
W(b) do_vfp @ CP#11 (VFP)
#else
- W(mov) pc, lr @ CP#10 (VFP)
- W(mov) pc, lr @ CP#11 (VFP)
+ movw_pc lr @ CP#10 (VFP)
+ movw_pc lr @ CP#11 (VFP)
#endif
- W(mov) pc, lr @ CP#12
- W(mov) pc, lr @ CP#13
- W(mov) pc, lr @ CP#14 (Debug)
- W(mov) pc, lr @ CP#15 (Control)
+ movw_pc lr @ CP#12
+ movw_pc lr @ CP#13
+ movw_pc lr @ CP#14 (Debug)
+ movw_pc lr @ CP#15 (Control)
#ifdef CONFIG_NEON
.align 6
.word no_fp
.previous
-no_fp: mov pc, lr
+ENTRY(no_fp)
+ mov pc, lr
+ENDPROC(no_fp)
__und_usr_unknown:
enable_irq
__pabt_usr:
usr_entry
-#ifdef MULTI_PABORT
mov r0, r2 @ pass address of aborted instruction.
+#ifdef MULTI_PABORT
ldr r4, .LCprocfns
mov lr, pc
ldr pc, [r4, #PROCESSOR_PABT_FUNC]
#else
- CPU_PABORT_HANDLER(r0, r2)
+ bl CPU_PABORT_HANDLER
#endif
enable_irq @ Enable interrupts
- mov r1, sp @ regs
+ mov r2, sp @ regs
bl do_PrefetchAbort @ call abort handler
UNWIND(.fnend )
/* fall through */
#ifdef CONFIG_MMU
ldr r6, [r2, #TI_CPU_DOMAIN]
#endif
-#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_32v6K
- clrex
-#else
- strex r5, r4, [ip] @ Clear exclusive monitor
-#endif
-#endif
#if defined(CONFIG_HAS_TLS_REG)
mcr p15, 0, r3, c13, c0, 3 @ set TLS register
#elif !defined(CONFIG_TLS_REG_EMUL)
cmp r0, r2
bne gnu_trace
ldmia sp!, {r0-r3, ip, lr}
- bx ip
+ mov pc, ip
gnu_trace:
ldr r1, [sp, #20] @ lr of instrumented routine
mov lr, pc
mov pc, r2
ldmia sp!, {r0-r3, ip, lr}
- bx ip
+ mov pc, ip
ENTRY(mcount)
stmdb sp!, {r0-r3, lr}
#endif
ENDPROC(sys_mmap2)
-ENTRY(pabort_ifar)
- mrc p15, 0, r0, cr6, cr0, 2
-ENTRY(pabort_noifar)
- mov pc, lr
-ENDPROC(pabort_ifar)
-ENDPROC(pabort_noifar)
-
#ifdef CONFIG_OABI_COMPAT
/*
#ifndef CONFIG_THUMB2_KERNEL
.macro svc_exit, rpsr
msr spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+#elif defined (CONFIG_CPU_V6)
+ ldr r0, [sp]
+ strex r1, r2, [sp] @ clear the exclusive monitor
+ ldmib sp, {r1 - pc}^ @ load r1 - pc, cpsr
+#else
+ ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
+#endif
.endm
.macro restore_user_regs, fast = 0, offset = 0
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
ldr lr, [sp, #\offset + S_PC]! @ get pc
msr spsr_cxsf, r1 @ save in spsr_svc
+#if defined(CONFIG_CPU_32v6K)
+ clrex @ clear the exclusive monitor
+#elif defined (CONFIG_CPU_V6)
+ strex r1, r2, [sp] @ clear the exclusive monitor
+#endif
.if \fast
ldmdb sp, {r1 - lr}^ @ get calling r1 - lr
.else
mov \rd, sp, lsr #13
mov \rd, \rd, lsl #13
.endm
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ .endm
#else /* CONFIG_THUMB2_KERNEL */
.macro svc_exit, rpsr
+ clrex @ clear the exclusive monitor
ldr r0, [sp, #S_SP] @ top of the stack
ldr r1, [sp, #S_PC] @ return address
tst r0, #4 @ orig stack 8-byte aligned?
.endm
.macro restore_user_regs, fast = 0, offset = 0
+ clrex @ clear the exclusive monitor
mov r2, sp
load_user_sp_lr r2, r3, \offset + S_SP @ calling sp, lr
ldr r1, [sp, #\offset + S_PSR] @ get calling cpsr
lsr \rd, \rd, #13
mov \rd, \rd, lsl #13
.endm
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ nop
+ .endm
#endif /* !CONFIG_THUMB2_KERNEL */
/*
#define ATAG_CORE 0x54410001
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
.align 2
.type __switch_data, %object
bne 1f
ldr r5, [r2, #0] @ is first tag ATAG_CORE?
- subs r5, r5, #ATAG_CORE_SIZE
+ cmp r5, #ATAG_CORE_SIZE
+ cmpne r5, #ATAG_CORE_SIZE_EMPTY
bne 1f
ldr r5, [r2, #4]
ldr r6, =ATAG_CORE
*
* The things we do for performance..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
#include <linux/kernel.h>
#include <linux/kprobes.h>
#include <linux/module.h>
+#include <linux/stop_machine.h>
#include <linux/stringify.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
flush_insns(p->addr, 1);
}
+/*
+ * The actual disarming is done here on each CPU and synchronized using
+ * stop_machine. This synchronization is necessary on SMP to avoid removing
+ * a probe between the moment the 'Undefined Instruction' exception is raised
+ * and the moment the exception handler reads the faulting instruction from
+ * memory.
+ */
+int __kprobes __arch_disarm_kprobe(void *p)
+{
+ struct kprobe *kp = p;
+ *kp->addr = kp->opcode;
+ flush_insns(kp->addr, 1);
+ return 0;
+}
+
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
- *p->addr = p->opcode;
- flush_insns(p->addr, 1);
+ stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
return 0;
}
+/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+ elf_core_copy_regs(elfregs, task_pt_regs(t));
+ return 1;
+}
+
/*
* fill in the fpe structure for a core dump...
*/
#include "compat.h"
#include "atags.h"
+#include "tcm.h"
#ifndef MEM_SIZE
#define MEM_SIZE (16*1024*1024)
#endif
cpu_init();
+ tcm_init();
/*
* Set up various architecture-specific pointers
/*
* linux/arch/arm/kernel/signal.c
*
- * Copyright (C) 1995-2002 Russell King
+ * Copyright (C) 1995-2009 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
*/
#define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
#define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
/*
* With EABI, the syscall number has to be loaded into r7.
MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
};
+/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled. In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+ SWI_SYS_RESTART, /* swi __NR_restart_syscall */
+ 0xe49df004, /* ldr pc, [sp], #4 */
+};
+
/*
* atomically swap in the new signal mask, and wait for a signal.
*/
regs->ARM_pc -= 4;
#else
u32 __user *usp;
- u32 swival = __NR_restart_syscall;
- regs->ARM_sp -= 12;
+ regs->ARM_sp -= 4;
usp = (u32 __user *)regs->ARM_sp;
- /*
- * Either we supports OABI only, or we have
- * EABI with the OABI compat layer enabled.
- * In the later case we don't know if user
- * space is EABI or not, and if not we must
- * not clobber r7. Always using the OABI
- * syscall solves that issue and works for
- * all those cases.
- */
- swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE;
-
- put_user(regs->ARM_pc, &usp[0]);
- /* swi __NR_restart_syscall */
- put_user(0xef000000 | swival, &usp[1]);
- /* ldr pc, [sp], #12 */
- put_user(0xe49df00c, &usp[2]);
-
- flush_icache_range((unsigned long)usp,
- (unsigned long)(usp + 3));
-
- regs->ARM_pc = regs->ARM_sp + 4;
+ put_user(regs->ARM_pc, usp);
+ regs->ARM_pc = KERN_RESTART_CODE;
#endif
}
}
/*
* linux/arch/arm/kernel/signal.h
*
- * Copyright (C) 2005 Russell King.
+ * Copyright (C) 2005-2009 Russell King.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
#include <asm/localtimer.h>
+#include <asm/smp_plat.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
/*
* __cpu_disable runs on the processor to be shutdown.
*/
-int __cpuexit __cpu_disable(void)
+int __cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
struct task_struct *p;
read_lock(&tasklist_lock);
for_each_process(p) {
if (p->mm)
- cpu_clear(cpu, p->mm->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(p->mm));
}
read_unlock(&tasklist_lock);
* called on the thread which is asking for a CPU to be shutdown -
* waits until shutdown has completed, or it is timed out.
*/
-void __cpuexit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
{
if (!platform_cpu_kill(cpu))
printk("CPU%u: unable to kill\n", cpu);
* of the other hotplug-cpu capable cores, so presumably coming
* out of idle fixes this.
*/
-void __cpuexit cpu_die(void)
+void __ref cpu_die(void)
{
unsigned int cpu = smp_processor_id();
atomic_inc(&mm->mm_users);
atomic_inc(&mm->mm_count);
current->active_mm = mm;
- cpu_set(cpu, mm->cpu_vm_mask);
+ cpumask_set_cpu(cpu, mm_cpumask(mm));
cpu_switch_mm(mm->pgd, mm);
enter_lazy_tlb(mm, current);
local_flush_tlb_all();
unsigned long ta_end;
};
-/* all SMP configurations have the extended CPUID registers */
-static inline int tlb_ops_need_broadcast(void)
-{
- return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
-}
-
static inline void ipi_flush_tlb_all(void *ignored)
{
local_flush_tlb_all();
void flush_tlb_mm(struct mm_struct *mm)
{
if (tlb_ops_need_broadcast())
- on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+ on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mm_cpumask(mm));
else
local_flush_tlb_mm(mm);
}
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = uaddr;
- on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mm_cpumask(vma->vm_mm));
} else
local_flush_tlb_page(vma, uaddr);
}
ta.ta_vma = vma;
ta.ta_start = start;
ta.ta_end = end;
- on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mm_cpumask(vma->vm_mm));
} else
local_flush_tlb_range(vma, start, end);
}
clockevents_register_device(clk);
}
+#ifdef CONFIG_HOTPLUG_CPU
/*
* take a local timer down
*/
-void __cpuexit twd_timer_stop(void)
+void twd_timer_stop(void)
{
__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
}
+#endif
#include <linux/mman.h>
#include <linux/fs.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/genalloc.h>
+#include <linux/string.h> /* memcpy */
+#include <asm/page.h> /* PAGE_SHIFT */
+#include <asm/cputype.h>
+#include <asm/mach/map.h>
+#include <mach/memory.h>
+#include "tcm.h"
+
+/* Scream and warn about misuse */
+#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
+ !defined(DTCM_OFFSET) || !defined(DTCM_END)
+#error "TCM support selected but offsets not defined!"
+#endif
+
+static struct gen_pool *tcm_pool;
+
+/* TCM section definitions from the linker */
+extern char __itcm_start, __sitcm_text, __eitcm_text;
+extern char __dtcm_start, __sdtcm_data, __edtcm_data;
+
+/*
+ * TCM memory resources
+ */
+static struct resource dtcm_res = {
+ .name = "DTCM RAM",
+ .start = DTCM_OFFSET,
+ .end = DTCM_END,
+ .flags = IORESOURCE_MEM
+};
+
+static struct resource itcm_res = {
+ .name = "ITCM RAM",
+ .start = ITCM_OFFSET,
+ .end = ITCM_END,
+ .flags = IORESOURCE_MEM
+};
+
+static struct map_desc dtcm_iomap[] __initdata = {
+ {
+ .virtual = DTCM_OFFSET,
+ .pfn = __phys_to_pfn(DTCM_OFFSET),
+ .length = (DTCM_END - DTCM_OFFSET + 1),
+ .type = MT_UNCACHED
+ }
+};
+
+static struct map_desc itcm_iomap[] __initdata = {
+ {
+ .virtual = ITCM_OFFSET,
+ .pfn = __phys_to_pfn(ITCM_OFFSET),
+ .length = (ITCM_END - ITCM_OFFSET + 1),
+ .type = MT_UNCACHED
+ }
+};
+
+/*
+ * Allocate a chunk of TCM memory
+ */
+void *tcm_alloc(size_t len)
+{
+ unsigned long vaddr;
+
+ if (!tcm_pool)
+ return NULL;
+
+ vaddr = gen_pool_alloc(tcm_pool, len);
+ if (!vaddr)
+ return NULL;
+
+ return (void *) vaddr;
+}
+EXPORT_SYMBOL(tcm_alloc);
+
+/*
+ * Free a chunk of TCM memory
+ */
+void tcm_free(void *addr, size_t len)
+{
+ gen_pool_free(tcm_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(tcm_free);
+
+
+static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+{
+ const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
+ 256, 512, 1024, -1, -1, -1, -1 };
+ u32 tcm_region;
+ int tcm_size;
+
+ /* Read the special TCM region register c9, 0 */
+ if (!type)
+ asm("mrc p15, 0, %0, c9, c1, 0"
+ : "=r" (tcm_region));
+ else
+ asm("mrc p15, 0, %0, c9, c1, 1"
+ : "=r" (tcm_region));
+
+ tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
+ if (tcm_size < 0) {
+ pr_err("CPU: %sTCM of unknown size!\n",
+ type ? "I" : "D");
+ } else {
+ pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+ type ? "I" : "D",
+ tcm_size,
+ (tcm_region & 0xfffff000U),
+ (tcm_region & 1) ? "" : "not ");
+ }
+
+ if (tcm_size != expected_size) {
+ pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
+ type ? "I" : "D",
+ tcm_size,
+ expected_size);
+ /* Adjust to the expected size? what can we do... */
+ }
+
+ /* Force move the TCM bank to where we want it, enable */
+ tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+
+ if (!type)
+ asm("mcr p15, 0, %0, c9, c1, 0"
+ : /* No output operands */
+ : "r" (tcm_region));
+ else
+ asm("mcr p15, 0, %0, c9, c1, 1"
+ : /* No output operands */
+ : "r" (tcm_region));
+
+ pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
+ type ? "I" : "D",
+ tcm_size,
+ (tcm_region & 0xfffff000U));
+}
+
+/*
+ * This initializes the TCM memory
+ */
+void __init tcm_init(void)
+{
+ u32 tcm_status = read_cpuid_tcmstatus();
+ char *start;
+ char *end;
+ char *ram;
+
+ /* Setup DTCM if present */
+ if (tcm_status & (1 << 16)) {
+ setup_tcm_bank(0, DTCM_OFFSET,
+ (DTCM_END - DTCM_OFFSET + 1) >> 10);
+ request_resource(&iomem_resource, &dtcm_res);
+ iotable_init(dtcm_iomap, 1);
+ /* Copy data from RAM to DTCM */
+ start = &__sdtcm_data;
+ end = &__edtcm_data;
+ ram = &__dtcm_start;
+ memcpy(start, ram, (end-start));
+ pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
+ }
+
+ /* Setup ITCM if present */
+ if (tcm_status & 1) {
+ setup_tcm_bank(1, ITCM_OFFSET,
+ (ITCM_END - ITCM_OFFSET + 1) >> 10);
+ request_resource(&iomem_resource, &itcm_res);
+ iotable_init(itcm_iomap, 1);
+ /* Copy code from RAM to ITCM */
+ start = &__sitcm_text;
+ end = &__eitcm_text;
+ ram = &__itcm_start;
+ memcpy(start, ram, (end-start));
+ pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
+ }
+}
+
+/*
+ * This creates the TCM memory pool and has to be done later,
+ * during the core_initicalls, since the allocator is not yet
+ * up and running when the first initialization runs.
+ */
+static int __init setup_tcm_pool(void)
+{
+ u32 tcm_status = read_cpuid_tcmstatus();
+ u32 dtcm_pool_start = (u32) &__edtcm_data;
+ u32 itcm_pool_start = (u32) &__eitcm_text;
+ int ret;
+
+ /*
+ * Set up malloc pool, 2^2 = 4 bytes granularity since
+ * the TCM is sometimes just 4 KiB. NB: pages and cache
+ * line alignments does not matter in TCM!
+ */
+ tcm_pool = gen_pool_create(2, -1);
+
+ pr_debug("Setting up TCM memory pool\n");
+
+ /* Add the rest of DTCM to the TCM pool */
+ if (tcm_status & (1 << 16)) {
+ if (dtcm_pool_start < DTCM_END) {
+ ret = gen_pool_add(tcm_pool, dtcm_pool_start,
+ DTCM_END - dtcm_pool_start + 1, -1);
+ if (ret) {
+ pr_err("CPU DTCM: could not add DTCM " \
+ "remainder to pool!\n");
+ return ret;
+ }
+ pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
+ "the TCM memory pool\n",
+ DTCM_END - dtcm_pool_start + 1,
+ dtcm_pool_start);
+ }
+ }
+
+ /* Add the rest of ITCM to the TCM pool */
+ if (tcm_status & 1) {
+ if (itcm_pool_start < ITCM_END) {
+ ret = gen_pool_add(tcm_pool, itcm_pool_start,
+ ITCM_END - itcm_pool_start + 1, -1);
+ if (ret) {
+ pr_err("CPU ITCM: could not add ITCM " \
+ "remainder to pool!\n");
+ return ret;
+ }
+ pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
+ "the TCM memory pool\n",
+ ITCM_END - itcm_pool_start + 1,
+ itcm_pool_start);
+ }
+ }
+ return 0;
+}
+
+core_initcall(setup_tcm_pool);
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifdef CONFIG_HAVE_TCM
+void __init tcm_init(void);
+#else
+/* No TCM support, just blank inlines to be optimized out */
+inline void tcm_init(void)
+{
+}
+#endif
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/timex.h>
#include <linux/errno.h>
/*
* linux/arch/arm/kernel/traps.c
*
- * Copyright (C) 1995-2002 Russell King
+ * Copyright (C) 1995-2009 Russell King
* Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds
*
* This program is free software; you can redistribute it and/or modify
__setup("user_debug=", user_debug_setup);
#endif
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
{
#ifdef CONFIG_KALLSYMS
- printk("[<%08lx>] ", where);
- print_symbol("(%s) ", where);
- printk("from [<%08lx>] ", from);
- print_symbol("(%s)\n", from);
+ char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+ sprint_symbol(sym1, where);
+ sprint_symbol(sym2, from);
+ printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
#else
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
#endif
if (in_exception_text(where))
- dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+ dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
}
#ifndef CONFIG_ARM_UNWIND
/*
* Dump out the contents of some memory nicely...
*/
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+ unsigned long top)
{
- unsigned long p = bottom & ~31;
+ unsigned long first;
mm_segment_t fs;
int i;
fs = get_fs();
set_fs(KERNEL_DS);
- printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+ printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
- for (p = bottom & ~31; p < top;) {
- printk("%04lx: ", p & 0xffff);
+ for (first = bottom & ~31; first < top; first += 32) {
+ unsigned long p;
+ char str[sizeof(" 12345678") * 8 + 1];
- for (i = 0; i < 8; i++, p += 4) {
- unsigned int val;
+ memset(str, ' ', sizeof(str));
+ str[sizeof(str) - 1] = '\0';
- if (p < bottom || p >= top)
- printk(" ");
- else {
- __get_user(val, (unsigned long *)p);
- printk("%08x ", val);
+ for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+ if (p >= bottom && p < top) {
+ unsigned long val;
+ if (__get_user(val, (unsigned long *)p) == 0)
+ sprintf(str + i * 9, " %08lx", val);
+ else
+ sprintf(str + i * 9, " ????????");
}
}
- printk ("\n");
+ printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
}
set_fs(fs);
}
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
{
unsigned long addr = instruction_pointer(regs);
const int thumb = thumb_mode(regs);
const int width = thumb ? 4 : 8;
mm_segment_t fs;
+ char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
int i;
/*
fs = get_fs();
set_fs(KERNEL_DS);
- printk("Code: ");
for (i = -4; i < 1; i++) {
unsigned int val, bad;
bad = __get_user(val, &((u32 *)addr)[i]);
if (!bad)
- printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+ p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+ width, val);
else {
- printk("bad PC value.");
+ p += sprintf(p, "bad PC value");
break;
}
}
- printk("\n");
+ printk("%sCode: %s\n", lvl, str);
set_fs(fs);
}
struct task_struct *tsk = thread->task;
static int die_counter;
- printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+ printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
str, err, ++die_counter);
+ sysfs_printk_last_file();
print_modules();
__show_regs(regs);
- printk("Process %s (pid: %d, stack limit = 0x%p)\n",
- tsk->comm, task_pid_nr(tsk), thread + 1);
+ printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+ TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
if (!user_mode(regs) || in_interrupt()) {
- dump_mem("Stack: ", regs->ARM_sp,
+ dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
THREAD_SIZE + (unsigned long)task_stack_page(tsk));
dump_backtrace(regs, tsk);
- dump_instr(regs);
+ dump_instr(KERN_EMERG, regs);
}
}
oops_enter();
- console_verbose();
spin_lock_irq(&die_lock);
+ console_verbose();
bust_spinlocks(1);
__die(str, err, thread, regs);
bust_spinlocks(0);
add_taint(TAINT_DIE);
spin_unlock_irq(&die_lock);
+ oops_exit();
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
- oops_exit();
do_exit(SIGSEGV);
}
if (user_debug & UDBG_UNDEFINED) {
printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
current->comm, task_pid_nr(current), pc);
- dump_instr(regs);
+ dump_instr(KERN_INFO, regs);
}
#endif
if (user_debug & UDBG_SYSCALL) {
printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
task_pid_nr(current), current->comm, n);
- dump_instr(regs);
+ dump_instr(KERN_ERR, regs);
}
#endif
static inline void
do_cache_op(unsigned long start, unsigned long end, int flags)
{
+ struct mm_struct *mm = current->active_mm;
struct vm_area_struct *vma;
if (end < start || flags)
return;
- vma = find_vma(current->active_mm, start);
+ down_read(&mm->mmap_sem);
+ vma = find_vma(mm, start);
if (vma && vma->vm_start < end) {
if (start < vma->vm_start)
start = vma->vm_start;
flush_cache_user_range(vma, start, end);
}
+ up_read(&mm->mmap_sem);
}
/*
if (user_debug & UDBG_SYSCALL) {
printk("[%d] %s: arm syscall %d\n",
task_pid_nr(current), current->comm, no);
- dump_instr(regs);
+ dump_instr("", regs);
if (user_mode(regs)) {
__show_regs(regs);
c_backtrace(regs->ARM_fp, processor_mode(regs));
if (user_debug & UDBG_BADABORT) {
printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
task_pid_nr(current), current->comm, code, instr);
- dump_instr(regs);
+ dump_instr(KERN_ERR, regs);
show_pte(current->mm, addr);
}
#endif
*/
memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
sizeof(sigreturn_codes));
+ memcpy((void *)KERN_RESTART_CODE, syscall_restart_code,
+ sizeof(syscall_restart_code));
flush_icache_range(vectors, vectors + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
* http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
*/
+#if !defined (__ARM_EABI__)
+#warning Your compiler does not have EABI support.
+#warning ARM unwind is known to compile only with EABI compilers.
+#warning Change compiler or disable ARM_UNWIND option.
+#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2)
+#warning Your compiler is too buggy; it is known to not compile ARM unwind support.
+#warning Change compiler or disable ARM_UNWIND option.
+#endif
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
}
_edata_loc = __data_loc + SIZEOF(.data);
+#ifdef CONFIG_HAVE_TCM
+ /*
+ * We align everything to a page boundary so we can
+ * free it after init has commenced and TCM contents have
+ * been copied to its destination.
+ */
+ .tcm_start : {
+ . = ALIGN(PAGE_SIZE);
+ __tcm_start = .;
+ __itcm_start = .;
+ }
+
+ /*
+ * Link these to the ITCM RAM
+ * Put VMA to the TCM address and LMA to the common RAM
+ * and we'll upload the contents from RAM to TCM and free
+ * the used RAM after that.
+ */
+ .text_itcm ITCM_OFFSET : AT(__itcm_start)
+ {
+ __sitcm_text = .;
+ *(.tcm.text)
+ *(.tcm.rodata)
+ . = ALIGN(4);
+ __eitcm_text = .;
+ }
+
+ /*
+ * Reset the dot pointer, this is needed to create the
+ * relative __dtcm_start below (to be used as extern in code).
+ */
+ . = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+ .dtcm_start : {
+ __dtcm_start = .;
+ }
+
+ /* TODO: add remainder of ITCM as well, that can be used for data! */
+ .data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+ {
+ . = ALIGN(4);
+ __sdtcm_data = .;
+ *(.tcm.data)
+ . = ALIGN(4);
+ __edtcm_data = .;
+ }
+
+ /* Reset the dot pointer or the linker gets confused */
+ . = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+ /* End marker for freeing TCM copy in linked object */
+ .tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+ . = ALIGN(PAGE_SIZE);
+ __tcm_end = .;
+ }
+#endif
+
.bss : {
__bss_start = .; /* BSS */
*(.bss)
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
+#include <asm/cache.h>
-#define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
+#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
.text
.align 5
ENTRY(copy_page)
stmfd sp!, {r4, lr} @ 2
PLD( pld [r1, #0] )
- PLD( pld [r1, #32] )
+ PLD( pld [r1, #L1_CACHE_BYTES] )
mov r2, #COPY_COUNT @ 1
ldmia r1!, {r3, r4, ip, lr} @ 4+1
-1: PLD( pld [r1, #64] )
- PLD( pld [r1, #96] )
-2: stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
- stmia r0!, {r3, r4, ip, lr} @ 4
- ldmia r1!, {r3, r4, ip, lr} @ 4+1
+1: PLD( pld [r1, #2 * L1_CACHE_BYTES])
+ PLD( pld [r1, #3 * L1_CACHE_BYTES])
+2:
+ .rept (2 * L1_CACHE_BYTES / 16 - 1)
stmia r0!, {r3, r4, ip, lr} @ 4
ldmia r1!, {r3, r4, ip, lr} @ 4
+ .endr
subs r2, r2, #1 @ 1
stmia r0!, {r3, r4, ip, lr} @ 4
ldmgtia r1!, {r3, r4, ip, lr} @ 4
* AC97
* -------------------------------------------------------------------- */
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
static struct resource ac97_resources[] = {
[0] = {
};
static struct platform_device at91cap9_ac97_device = {
- .name = "ac97c",
+ .name = "atmel_ac97c",
.id = 1,
.dev = {
.dma_mask = &ac97_dmamask,
.num_resources = ARRAY_SIZE(ac97_resources),
};
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
{
if (!data)
return;
platform_device_register(&at91cap9_ac97_device);
}
#else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
#endif
+/* --------------------------------------------------------------------
+ * CAN Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
+static struct resource can_resources[] = {
+ [0] = {
+ .start = AT91SAM9263_BASE_CAN,
+ .end = AT91SAM9263_BASE_CAN + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9263_ID_CAN,
+ .end = AT91SAM9263_ID_CAN,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9263_can_device = {
+ .name = "at91_can",
+ .id = -1,
+ .resource = can_resources,
+ .num_resources = ARRAY_SIZE(can_resources),
+};
+
+void __init at91_add_device_can(struct at91_can_data *data)
+{
+ at91_set_A_periph(AT91_PIN_PA13, 0); /* CANTX */
+ at91_set_A_periph(AT91_PIN_PA14, 0); /* CANRX */
+ at91sam9263_can_device.dev.platform_data = data;
+
+ platform_device_register(&at91sam9263_can_device);
+}
+#else
+void __init at91_add_device_can(struct at91_can_data *data) {}
+#endif
/* --------------------------------------------------------------------
* LCD Controller
#include <mach/at91sam9g45.h>
#include <mach/at91sam9g45_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
#include "generic.h"
+/* --------------------------------------------------------------------
+ * HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+ .nr_channels = 8,
+};
+
+static struct resource hdmac_resources[] = {
+ [0] = {
+ .start = AT91_BASE_SYS + AT91_DMA,
+ .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9G45_ID_DMA,
+ .end = AT91SAM9G45_ID_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at_hdmac_device = {
+ .name = "at_hdmac",
+ .id = -1,
+ .dev = {
+ .dma_mask = &hdmac_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &atdma_pdata,
+ },
+ .resource = hdmac_resources,
+ .num_resources = ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+ dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+ dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+ platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
+
/* --------------------------------------------------------------------
* USB Host (OHCI)
* -------------------------------------------------------------------- */
#endif
+/* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91SAM9G45_BASE_AC97C,
+ .end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9G45_ID_AC97C,
+ .end = AT91SAM9G45_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9g45_ac97_device = {
+ .name = "atmel_ac97c",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91sam9g45_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9g45_wdt_device = {
.name = "at91_wdt",
.id = -1,
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_watchdog();
#include <mach/at91sam9rl.h>
#include <mach/at91sam9rl_matrix.h>
#include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
#include "generic.h"
+/* --------------------------------------------------------------------
+ * HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+ .nr_channels = 2,
+};
+
+static struct resource hdmac_resources[] = {
+ [0] = {
+ .start = AT91_BASE_SYS + AT91_DMA,
+ .end = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = AT91SAM9RL_ID_DMA,
+ .end = AT91SAM9RL_ID_DMA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at_hdmac_device = {
+ .name = "at_hdmac",
+ .id = -1,
+ .dev = {
+ .dma_mask = &hdmac_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &atdma_pdata,
+ },
+ .resource = hdmac_resources,
+ .num_resources = ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+ dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+ platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
/* --------------------------------------------------------------------
* USB HS Device (Gadget)
* -------------------------------------------------------------------- */
#endif
+/* --------------------------------------------------------------------
+ * AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+ [0] = {
+ .start = AT91SAM9RL_BASE_AC97C,
+ .end = AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = AT91SAM9RL_ID_AC97C,
+ .end = AT91SAM9RL_ID_AC97C,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device at91sam9rl_ac97_device = {
+ .name = "atmel_ac97c",
+ .id = 0,
+ .dev = {
+ .dma_mask = &ac97_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ .platform_data = &ac97_data,
+ },
+ .resource = ac97_resources,
+ .num_resources = ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+ if (!data)
+ return;
+
+ at91_set_A_periph(AT91_PIN_PD1, 0); /* AC97FS */
+ at91_set_A_periph(AT91_PIN_PD2, 0); /* AC97CK */
+ at91_set_A_periph(AT91_PIN_PD3, 0); /* AC97TX */
+ at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */
+
+ /* reset */
+ if (data->reset_pin)
+ at91_set_gpio_output(data->reset_pin, 0);
+
+ ac97_data = *data;
+ platform_device_register(&at91sam9rl_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
/* --------------------------------------------------------------------
* LCD Controller
* -------------------------------------------------------------------- */
*/
static int __init at91_add_standard_devices(void)
{
+ at91_add_device_hdmac();
at91_add_device_rtc();
at91_add_device_rtt();
at91_add_device_watchdog();
/*
* AC97
*/
-static struct atmel_ac97_data cap9adk_ac97_data = {
+static struct ac97c_platform_data cap9adk_ac97_data = {
// .reset_pin = ... not connected
};
/*
* AC97
*/
-static struct atmel_ac97_data neocore926_ac97_data = {
+static struct ac97c_platform_data neocore926_ac97_data = {
.reset_pin = AT91_PIN_PA13,
};
}
};
+/*
+ * CAN
+ */
+static void sam9263ek_transceiver_switch(int on)
+{
+ if (on) {
+ at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
+ at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
+ } else {
+ at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
+ at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
+ }
+}
+
+static struct at91_can_data ek_can_data = {
+ .transceiver_switch = sam9263ek_transceiver_switch,
+};
static void __init ek_board_init(void)
{
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+ /* CAN */
+ at91_add_device_can(&ek_can_data);
}
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
#endif
+/*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
/*
* LEDs ... these could all be PWM-driven, for variable brightness
*/
at91_add_device_lcdc(&ek_lcdc_data);
/* Push Buttons */
ek_add_device_buttons();
+ /* AC97 */
+ at91_add_device_ac97(&ek_ac97_data);
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
#endif
+/*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
/*
* LEDs
*/
at91_add_device_mmc(0, &ek_mmc_data);
/* LCD Controller */
at91_add_device_lcdc(&ek_lcdc_data);
+ /* AC97 */
+ at91_add_device_ac97(&ek_ac97_data);
/* Touch Screen Controller */
at91_add_device_tsadcc();
/* LEDs */
/* Touchscreen Controller */
extern void __init at91_add_device_tsadcc(void);
+/* CAN */
+struct at91_can_data {
+ void (*transceiver_switch)(int on);
+};
+extern void __init at91_add_device_can(struct at91_can_data *data);
+
/* LEDs */
extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
#define ARCH_ID_AT91SAM9G20 0x019905a0
#define ARCH_ID_AT91SAM9RL64 0x019b03a0
#define ARCH_ID_AT91SAM9G45 0x819b05a0
+#define ARCH_ID_AT91SAM9G45MRL 0x819b05a2 /* aka 9G45-ES2 & non ES lots */
+#define ARCH_ID_AT91SAM9G45ES 0x819b05a1 /* 9G45-ES (Engineering Sample) */
#define ARCH_ID_AT91CAP9 0x039A03A0
#define ARCH_ID_AT91SAM9XE128 0x329973a0
return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
}
+static inline unsigned long at91_cpu_fully_identify(void)
+{
+ return at91_sys_read(AT91_DBGU_CIDR);
+}
+
#define ARCH_EXID_AT91SAM9M11 0x00000001
#define ARCH_EXID_AT91SAM9M10 0x00000002
#define ARCH_EXID_AT91SAM9G45 0x00000004
#ifdef CONFIG_ARCH_AT91SAM9G45
#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
#else
#define cpu_is_at91sam9g45() (0)
+#define cpu_is_at91sam9g45es() (0)
#endif
#ifdef CONFIG_ARCH_AT91CAP9
#include <linux/clocksource.h>
#include <linux/clockchips.h>
-#include <linux/amba/bus.h>
#include <mach/csp/mm_addr.h>
#include <mach/hardware.h>
#include <asm/clkdev.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <cfg_global.h>
.handler = bcmring_timer_interrupt,
};
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
{
return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
}
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
{
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
}
cpu_do_idle();
}
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
{
printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
#include <mach/common.h>
#include <mach/i2c.h>
#include <mach/serial.h>
-#include <mach/common.h>
#include <mach/mmc.h>
#include <mach/nand.h>
bool "0x00000000 - SDCE3/SyncBoot"
help
Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0x00000000
+ first SDRAM bank at 0x00000000.
config EP93XX_SDCE0_PHYS_OFFSET
bool "0xc0000000 - SDCEO"
help
Select this option if you want support for EP93xx boards with the
- first SDRAM bank at 0xc0000000
+ first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+ bool "0xd0000000 - SDCE1"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+ bool "0xe0000000 - SDCE2"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ bool "0xf0000000 - SDCE3/AsyncBoot"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xf0000000.
endchoice
bool
config MACH_MICRO9H
- bool "Support Contec Hypercontrol Micro9-H"
+ bool "Support Contec Micro9-High"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-H board.
+ Contec Micro9-High board.
config MACH_MICRO9M
- bool "Support Contec Hypercontrol Micro9-M"
- depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ bool "Support Contec Micro9-Mid"
+ depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-M board.
+ Contec Micro9-Mid board.
config MACH_MICRO9L
- bool "Support Contec Hypercontrol Micro9-L"
+ bool "Support Contec Micro9-Lite"
depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
select MACH_MICRO9
help
Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-L board.
+ Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+ bool "Support Contec Micro9-Slim"
+ depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Micro9-Slim board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET) := 0xd0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET) := 0xe0000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET) := 0xf0000100
#include <linux/module.h>
#include <linux/string.h>
#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
-#include <mach/hardware.h>
struct clk {
+ struct clk *parent;
unsigned long rate;
int users;
int sw_locked;
static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
static int set_div_rate(struct clk *clk, unsigned long rate);
+
+static struct clk clk_xtali = {
+ .rate = EP93XX_EXT_CLK_RATE,
+};
static struct clk clk_uart1 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U1EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart2 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U2EN,
.get_rate = get_uart_rate,
};
static struct clk clk_uart3 = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_DEVCFG,
.enable_mask = EP93XX_SYSCON_DEVCFG_U3EN,
.get_rate = get_uart_rate,
};
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+ .parent = &clk_xtali,
+};
+static struct clk clk_f = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_h = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_p = {
+ .parent = &clk_pll1,
+};
+static struct clk clk_pll2 = {
+ .parent = &clk_xtali,
+};
static struct clk clk_usb_host = {
+ .parent = &clk_pll2,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
static struct clk clk_keypad = {
+ .parent = &clk_xtali,
.sw_locked = 1,
.enable_reg = EP93XX_SYSCON_KEYTCHCLKDIV,
.enable_mask = EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
.set_rate = set_keytchclk_rate,
};
static struct clk clk_pwm = {
+ .parent = &clk_xtali,
.rate = EP93XX_EXT_CLK_RATE,
};
/* DMA Clocks */
static struct clk clk_m2p0 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
};
static struct clk clk_m2p1 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
};
static struct clk clk_m2p2 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
};
static struct clk clk_m2p3 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
};
static struct clk clk_m2p4 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
};
static struct clk clk_m2p5 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
};
static struct clk clk_m2p6 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
};
static struct clk clk_m2p7 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
};
static struct clk clk_m2p8 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
};
static struct clk clk_m2p9 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
};
static struct clk clk_m2m0 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
};
static struct clk clk_m2m1 = {
+ .parent = &clk_h,
.enable_reg = EP93XX_SYSCON_PWRCNT,
.enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
};
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
+ INIT_CK(NULL, "xtali", &clk_xtali),
INIT_CK("apb:uart1", NULL, &clk_uart1),
INIT_CK("apb:uart2", NULL, &clk_uart2),
INIT_CK("apb:uart3", NULL, &clk_uart3),
INIT_CK(NULL, "m2m1", &clk_m2m1),
};
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+ if (!clk->users++) {
+ if (clk->parent)
+ __clk_enable(clk->parent);
+
+ if (clk->enable_reg) {
+ u32 v;
+
+ v = __raw_readl(clk->enable_reg);
+ v |= clk->enable_mask;
+ if (clk->sw_locked)
+ ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+ else
+ __raw_writel(v, clk->enable_reg);
+ }
+ }
+}
int clk_enable(struct clk *clk)
{
- if (!clk->users++ && clk->enable_reg) {
- u32 value;
+ unsigned long flags;
- value = __raw_readl(clk->enable_reg);
- value |= clk->enable_mask;
- if (clk->sw_locked)
- ep93xx_syscon_swlocked_write(value, clk->enable_reg);
- else
- __raw_writel(value, clk->enable_reg);
- }
+ if (!clk)
+ return -EINVAL;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
return 0;
}
EXPORT_SYMBOL(clk_enable);
-void clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
{
- if (!--clk->users && clk->enable_reg) {
- u32 value;
+ if (!--clk->users) {
+ if (clk->enable_reg) {
+ u32 v;
+
+ v = __raw_readl(clk->enable_reg);
+ v &= ~clk->enable_mask;
+ if (clk->sw_locked)
+ ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+ else
+ __raw_writel(v, clk->enable_reg);
+ }
- value = __raw_readl(clk->enable_reg);
- value &= ~clk->enable_mask;
- if (clk->sw_locked)
- ep93xx_syscon_swlocked_write(value, clk->enable_reg);
- else
- __raw_writel(value, clk->enable_reg);
+ if (clk->parent)
+ __clk_disable(clk->parent);
}
}
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ if (!clk)
+ return;
+
+ spin_lock_irqsave(&clk_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clk_lock, flags);
+}
EXPORT_SYMBOL(clk_disable);
static unsigned long get_uart_rate(struct clk *clk)
{
+ unsigned long rate = clk_get_rate(clk->parent);
u32 value;
value = __raw_readl(EP93XX_SYSCON_PWRCNT);
if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
- return EP93XX_EXT_CLK_RATE;
+ return rate;
else
- return EP93XX_EXT_CLK_RATE / 2;
+ return rate / 2;
}
unsigned long clk_get_rate(struct clk *clk)
return 0;
}
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
- int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+ int *psel, int *esel, int *pdiv, int *div)
{
- unsigned long max_rate, best_rate = 0,
- actual_rate = 0, mclk_rate = 0, rate_err = -1;
+ struct clk *mclk;
+ unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
int i, found = 0, __div = 0, __pdiv = 0;
/* Don't exceed the maximum rate */
max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
- (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+ clk_xtali.rate / 4);
rate = min(rate, max_rate);
/*
*/
for (i = 0; i < 3; i++) {
if (i == 0)
- mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+ mclk = &clk_xtali;
else if (i == 1)
- mclk_rate = clk_pll1.rate * 2;
- else if (i == 2)
- mclk_rate = clk_pll2.rate * 2;
+ mclk = &clk_pll1;
+ else
+ mclk = &clk_pll2;
+ mclk_rate = mclk->rate * 2;
/* Try each predivider value */
for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
*div = __div;
*psel = (i == 2);
*esel = (i != 0);
- best_rate = actual_rate;
+ clk->parent = mclk;
+ clk->rate = actual_rate;
rate_err = abs(actual_rate - rate);
found = 1;
}
}
if (!found)
- return 0;
+ return -EINVAL;
- return best_rate;
+ return 0;
}
static int set_div_rate(struct clk *clk, unsigned long rate)
{
- unsigned long actual_rate;
- int psel = 0, esel = 0, pdiv = 0, div = 0;
+ int err, psel = 0, esel = 0, pdiv = 0, div = 0;
u32 val;
- actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
- if (actual_rate == 0)
- return -EINVAL;
- clk->rate = actual_rate;
+ err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+ if (err)
+ return err;
/* Clear the esel, psel, pdiv and div bits */
val = __raw_readl(clk->enable_reg);
unsigned long long rate;
int i;
- rate = EP93XX_EXT_CLK_RATE;
+ rate = clk_xtali.rate;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
- clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+ clk_pll1.rate = clk_xtali.rate;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
- clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+ clk_pll2.rate = clk_xtali.rate;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- desc = irq_desc + gpio_irq;
generic_handle_irq(gpio_irq);
}
}
platform_device_register(&ep93xx_eth_device);
}
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
- .sda_pin = EP93XX_GPIO_LINE_EEDAT,
- .sda_is_open_drain = 0,
- .scl_pin = EP93XX_GPIO_LINE_EECLK,
- .scl_is_open_drain = 0,
- .udelay = 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
static struct platform_device ep93xx_i2c_device = {
.name = "i2c-gpio",
.dev.platform_data = &ep93xx_i2c_data,
};
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+ struct i2c_board_info *devices, int num)
{
+ /*
+ * Set the EEPROM interface pin drive type control.
+ * Defines the driver type for the EECLK and EEDAT pins as either
+ * open drain, which will require an external pull-up, or a normal
+ * CMOS driver.
+ */
+ if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+ pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+ if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+ pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+ __raw_writel((data->sda_is_open_drain << 1) |
+ (data->scl_is_open_drain << 0),
+ EP93XX_GPIO_EEDRIVE);
+
+ ep93xx_i2c_data = *data;
i2c_register_board_info(0, devices, num);
platform_device_register(&ep93xx_i2c_device);
}
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
#include <mach/hardware.h>
.phy_id = 1,
};
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+ .sda_pin = EP93XX_GPIO_LINE_EEDAT,
+ .sda_is_open_drain = 0,
+ .scl_pin = EP93XX_GPIO_LINE_EECLK,
+ .scl_is_open_drain = 0,
+ .udelay = 0, /* default to 100 kHz */
+ .timeout = 0, /* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
{
I2C_BOARD_INFO("isl1208", 0x6f),
},
};
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
{
I2C_BOARD_INFO("ds1337", 0x68),
},
{
if (machine_is_edb9302a() || machine_is_edb9307a() ||
machine_is_edb9315a()) {
- ep93xx_register_i2c(edb93xxa_i2c_data,
- ARRAY_SIZE(edb93xxa_i2c_data));
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+ edb93xxa_i2c_board_info,
+ ARRAY_SIZE(edb93xxa_i2c_board_info));
} else if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
- ep93xx_register_i2c(edb93xx_i2c_data,
- ARRAY_SIZE(edb93xx_i2c_data));
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+ edb93xx_i2c_board_info,
+ ARRAY_SIZE(edb93xx_i2c_board_info));
}
}
#define EP93XX_AHB_VIRT_BASE 0xfef00000
#define EP93XX_AHB_SIZE 0x00100000
+#define EP93XX_AHB_PHYS(x) (EP93XX_AHB_PHYS_BASE + (x))
#define EP93XX_AHB_IOMEM(x) IOMEM(EP93XX_AHB_VIRT_BASE + (x))
#define EP93XX_APB_PHYS_BASE 0x80800000
#define EP93XX_APB_VIRT_BASE 0xfed00000
#define EP93XX_APB_SIZE 0x00200000
+#define EP93XX_APB_PHYS(x) (EP93XX_APB_PHYS_BASE + (x))
#define EP93XX_APB_IOMEM(x) IOMEM(EP93XX_APB_VIRT_BASE + (x))
/* AHB peripherals */
#define EP93XX_DMA_BASE EP93XX_AHB_IOMEM(0x00000000)
-#define EP93XX_ETHERNET_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE EP93XX_AHB_PHYS(0x00010000)
#define EP93XX_ETHERNET_BASE EP93XX_AHB_IOMEM(0x00010000)
-#define EP93XX_USB_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE EP93XX_AHB_PHYS(0x00020000)
#define EP93XX_USB_BASE EP93XX_AHB_IOMEM(0x00020000)
-#define EP93XX_RASTER_PHYS_BASE (EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE EP93XX_AHB_PHYS(0x00030000)
#define EP93XX_RASTER_BASE EP93XX_AHB_IOMEM(0x00030000)
#define EP93XX_GRAPHICS_ACCEL_BASE EP93XX_AHB_IOMEM(0x00040000)
#define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000)
#define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1 EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2 EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE EP93XX_GPIO_REG(0x58)
#define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1 EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2 EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE EP93XX_GPIO_REG(0x9c)
#define EP93XX_GPIO_A_INT_STATUS EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1 EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2 EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE EP93XX_GPIO_REG(0xb8)
#define EP93XX_GPIO_B_INT_STATUS EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE EP93XX_GPIO_REG(0xc8)
#define EP93XX_AAC_BASE EP93XX_APB_IOMEM(0x00080000)
#define EP93XX_IRDA_BASE EP93XX_APB_IOMEM(0x000b0000)
-#define EP93XX_UART1_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE EP93XX_APB_PHYS(0x000c0000)
#define EP93XX_UART1_BASE EP93XX_APB_IOMEM(0x000c0000)
-#define EP93XX_UART2_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE EP93XX_APB_PHYS(0x000d0000)
#define EP93XX_UART2_BASE EP93XX_APB_IOMEM(0x000d0000)
-#define EP93XX_UART3_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE EP93XX_APB_PHYS(0x000e0000)
#define EP93XX_UART3_BASE EP93XX_APB_IOMEM(0x000e0000)
#define EP93XX_KEY_MATRIX_BASE EP93XX_APB_IOMEM(0x000f0000)
#define EP93XX_ADC_BASE EP93XX_APB_IOMEM(0x00100000)
#define EP93XX_TOUCHSCREEN_BASE EP93XX_APB_IOMEM(0x00100000)
-#define EP93XX_PWM_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE EP93XX_APB_PHYS(0x00110000)
#define EP93XX_PWM_BASE EP93XX_APB_IOMEM(0x00110000)
-#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE EP93XX_APB_PHYS(0x00120000)
#define EP93XX_RTC_BASE EP93XX_APB_IOMEM(0x00120000)
#define EP93XX_SYSCON_BASE EP93XX_APB_IOMEM(0x00130000)
#define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV (1<<16)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KEN (1<<15)
#define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV (1<<0)
+#define EP93XX_SYSCON_SYSCFG EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK (0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT (28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT (1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7 (1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6 (1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO (1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA (1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK (1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2 (1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1 (1<<0)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE EP93XX_APB_IOMEM(0x00140000)
* B0..B7 (7..15) to irq 72..79, and
* F0..F7 (16..24) to irq 80..87.
*/
-static inline int gpio_to_irq(unsigned gpio)
-{
- if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
- return 64 + gpio;
-
- return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq - gpio_to_irq(0);
-}
+#define gpio_to_irq(gpio) \
+ (((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
+
+#define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
#endif
#define PHYS_OFFSET UL(0x00000000)
#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
#define PHYS_OFFSET UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xf0000000)
#else
#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
#endif
#ifndef __ASSEMBLY__
+struct i2c_gpio_platform_data;
struct i2c_board_info;
struct platform_device;
struct ep93xxfb_mach_info;
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
/* EP93xx System Controller software locked register write */
void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
}
void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+ struct i2c_board_info *devices, int num);
void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
void ep93xx_register_pwm(int pwm0, int pwm1);
int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
* linux/arch/arm/mach-ep93xx/micro9.c
*
* Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- * Manfred Gruber <manfred.gruber@contec.at>
+ * Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ * Hubert Feurstein <hubert.feurstein@contec.at>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <asm/mach/arch.h>
-static struct ep93xx_eth_data micro9_eth_data = {
- .phy_id = 0x1f,
-};
-
-static void __init micro9_init(void)
-{
- ep93xx_register_eth(µ9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
- .width = 4,
-};
-
-static struct resource micro9h_flash_resource = {
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
+
+static struct resource micro9_flash_resource = {
.start = EP93XX_CS1_PHYS_BASE,
.end = EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
.name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = µ9h_flash_data,
+ .platform_data = µ9_flash_data,
},
.num_resources = 1,
- .resource = µ9h_flash_resource,
+ .resource = µ9_flash_resource,
};
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
+{
+ micro9_flash_data.width = width;
+
+ platform_device_register(µ9_flash);
+}
+
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+ u32 v;
+
+ /* Detect the bus width of the external flash memory */
+ v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+ if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+ return 4; /* 32-bit */
+ else
+ return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
{
- platform_device_register(µ9h_flash);
+ if (machine_is_micro9())
+ __micro9_register_flash(4);
+ else if (machine_is_micro9m() || machine_is_micro9s())
+ __micro9_register_flash(micro9_detect_bootwidth());
}
-static void __init micro9h_init_machine(void)
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+ .phy_id = 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
{
ep93xx_init_devices();
- micro9_init();
- micro9h_init();
+ ep93xx_register_eth(µ9_eth_data, 1);
+ micro9_register_flash();
}
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9h_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
-/*
- * Micro9-M
- */
#ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
- ep93xx_init_devices();
- micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9m_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
-/*
- * Micro9-L
- */
#ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
- ep93xx_init_devices();
- micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
- /* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
.phys_io = EP93XX_APB_PHYS_BASE,
.io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
- .init_machine = micro9l_init_machine,
+ .init_machine = micro9_init_machine,
MACHINE_END
#endif
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+ /* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = micro9_init_machine,
+MACHINE_END
+#endif
#define BUS_OFFSET UL(0x80000000)
#define __virt_to_bus(x) ((x) - PAGE_OFFSET + BUS_OFFSET)
#define __bus_to_virt(x) ((x) - BUS_OFFSET + PAGE_OFFSET)
+#define __pfn_to_bus(x) (((x) << PAGE_SHIFT) + BUS_OFFSET)
#endif
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
#include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <asm/clkdev.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
return status & 8;
}
-static struct mmc_platform_data mmc_data = {
+static struct mmci_platform_data mmc_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <asm/signal.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
#include <asm/irq_regs.h>
return ret;
}
-struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
{
return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
}
return 16;
}
+#define iop_adma_get_max_pq iop_adma_get_max_xor
+
static inline u32 iop_chan_get_current_descriptor(struct iop_adma_chan *chan)
{
return __raw_readl(ADMA_ADAR(chan));
#define IOP_ADMA_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define IOP_ADMA_ZERO_SUM_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define IOP_ADMA_XOR_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
+#define IOP_ADMA_PQ_MAX_BYTE_COUNT ADMA_MAX_BYTE_COUNT
#define iop_chan_zero_sum_slot_count(l, s, o) iop_chan_xor_slot_count(l, s, o)
+#define iop_chan_pq_slot_count iop_chan_xor_slot_count
+#define iop_chan_pq_zero_sum_slot_count iop_chan_xor_slot_count
static inline u32 iop_desc_get_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
return hw_desc->dest_addr;
}
+static inline u32 iop_desc_get_qdest_addr(struct iop_adma_desc_slot *desc,
+ struct iop_adma_chan *chan)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ return hw_desc->q_dest_addr;
+}
+
static inline u32 iop_desc_get_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
{
return 1;
}
+static inline void
+iop_desc_init_pq(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = 0;
+ u_desc_ctrl.field.src_select = src_cnt - 1;
+ u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+ u_desc_ctrl.field.pq_xfer_en = 1;
+ u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
+ u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+ hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
+static inline int iop_desc_is_pq(struct iop_adma_desc_slot *desc)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = hw_desc->desc_ctrl;
+ return u_desc_ctrl.field.pq_xfer_en;
+}
+
+static inline void
+iop_desc_init_pq_zero_sum(struct iop_adma_desc_slot *desc, int src_cnt,
+ unsigned long flags)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+ union {
+ u32 value;
+ struct iop13xx_adma_desc_ctrl field;
+ } u_desc_ctrl;
+
+ u_desc_ctrl.value = 0;
+ u_desc_ctrl.field.src_select = src_cnt - 1;
+ u_desc_ctrl.field.xfer_dir = 3; /* local to internal bus */
+ u_desc_ctrl.field.zero_result = 1;
+ u_desc_ctrl.field.status_write_back_en = 1;
+ u_desc_ctrl.field.pq_xfer_en = 1;
+ u_desc_ctrl.field.p_xfer_dis = !!(flags & DMA_PREP_PQ_DISABLE_P);
+ u_desc_ctrl.field.int_en = flags & DMA_PREP_INTERRUPT;
+ hw_desc->desc_ctrl = u_desc_ctrl.value;
+}
+
static inline void iop_desc_set_byte_count(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan,
u32 byte_count)
}
}
+#define iop_desc_set_pq_zero_sum_byte_count iop_desc_set_zero_sum_byte_count
static inline void iop_desc_set_dest_addr(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan,
hw_desc->upper_dest_addr = 0;
}
+static inline void
+iop_desc_set_pq_addr(struct iop_adma_desc_slot *desc, dma_addr_t *addr)
+{
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
+
+ hw_desc->dest_addr = addr[0];
+ hw_desc->q_dest_addr = addr[1];
+ hw_desc->upper_dest_addr = 0;
+}
+
static inline void iop_desc_set_memcpy_src_addr(struct iop_adma_desc_slot *desc,
dma_addr_t addr)
{
} while (slot_cnt);
}
+static inline void
+iop_desc_set_pq_src_addr(struct iop_adma_desc_slot *desc, int src_idx,
+ dma_addr_t addr, unsigned char coef)
+{
+ int slot_cnt = desc->slot_cnt, slots_per_op = desc->slots_per_op;
+ struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc, *iter;
+ struct iop13xx_adma_src *src;
+ int i = 0;
+
+ do {
+ iter = iop_hw_desc_slot_idx(hw_desc, i);
+ src = &iter->src[src_idx];
+ src->src_addr = addr;
+ src->pq_upper_src_addr = 0;
+ src->pq_dmlt = coef;
+ slot_cnt -= slots_per_op;
+ if (slot_cnt) {
+ i += slots_per_op;
+ addr += IOP_ADMA_PQ_MAX_BYTE_COUNT;
+ }
+ } while (slot_cnt);
+}
+
static inline void
iop_desc_init_interrupt(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *chan)
}
#define iop_desc_set_zero_sum_src_addr iop_desc_set_xor_src_addr
+#define iop_desc_set_pq_zero_sum_src_addr iop_desc_set_pq_src_addr
+
+static inline void
+iop_desc_set_pq_zero_sum_addr(struct iop_adma_desc_slot *desc, int pq_idx,
+ dma_addr_t *src)
+{
+ iop_desc_set_xor_src_addr(desc, pq_idx, src[pq_idx]);
+ iop_desc_set_xor_src_addr(desc, pq_idx+1, src[pq_idx+1]);
+}
static inline void iop_desc_set_next_desc(struct iop_adma_desc_slot *desc,
u32 next_desc_addr)
hw_desc->block_fill_data = val;
}
-static inline int iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
+static inline enum sum_check_flags
+iop_desc_get_zero_result(struct iop_adma_desc_slot *desc)
{
struct iop13xx_adma_desc_hw *hw_desc = desc->hw_desc;
struct iop13xx_adma_desc_ctrl desc_ctrl = hw_desc->desc_ctrl_field;
struct iop13xx_adma_byte_count byte_count = hw_desc->byte_count_field;
+ enum sum_check_flags flags;
BUG_ON(!(byte_count.tx_complete && desc_ctrl.zero_result));
- if (desc_ctrl.pq_xfer_en)
- return byte_count.zero_result_err_q;
- else
- return byte_count.zero_result_err;
+ flags = byte_count.zero_result_err_q << SUM_CHECK_Q;
+ flags |= byte_count.zero_result_err << SUM_CHECK_P;
+
+ return flags;
}
static inline void iop_chan_append(struct iop_adma_chan *chan)
plat_data = &iop13xx_adma_0_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
break;
case IOP13XX_INIT_ADMA_1:
plat_data = &iop13xx_adma_1_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
break;
case IOP13XX_INIT_ADMA_2:
plat_data = &iop13xx_adma_2_data;
dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
dma_cap_set(DMA_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_DUAL_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_ZERO_SUM, plat_data->cap_mask);
+ dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, plat_data->cap_mask);
dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
- dma_cap_set(DMA_PQ_XOR, plat_data->cap_mask);
- dma_cap_set(DMA_PQ_UPDATE, plat_data->cap_mask);
- dma_cap_set(DMA_PQ_ZERO_SUM, plat_data->cap_mask);
+ dma_cap_set(DMA_PQ, plat_data->cap_mask);
+ dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
break;
}
}
#define IOP32X_MAX_RAM_SIZE 0x40000000UL
#define IOP3XX_MAX_RAM_SIZE IOP32X_MAX_RAM_SIZE
#define IOP3XX_PCI_LOWER_MEM_BA 0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE 0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP32X_PCI_MEM_WINDOW_SIZE
#endif
#define IOP33X_MAX_RAM_SIZE 0x80000000UL
#define IOP3XX_MAX_RAM_SIZE IOP33X_MAX_RAM_SIZE
#define IOP3XX_PCI_LOWER_MEM_BA (PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE 0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE IOP33X_PCI_MEM_WINDOW_SIZE
#endif
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
-static int __init ixp4xx_clocksource_init(void);
-static int __init ixp4xx_clockevent_init(void);
+static void __init ixp4xx_clocksource_init(void);
+static void __init ixp4xx_clockevent_init(void);
static struct clock_event_device clockevent_ixp4xx;
/*************************************************************************
static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = &clockevent_ixp4xx;
+ struct clock_event_device *evt = dev_id;
/* Clear Pending Interrupt by writing '1' to it */
*IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND;
.name = "timer1",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = ixp4xx_timer_interrupt,
+ .dev_id = &clockevent_ixp4xx,
};
void __init ixp4xx_timer_init(void)
/*
* clocksource
*/
-cycle_t ixp4xx_get_cycles(struct clocksource *cs)
+static cycle_t ixp4xx_get_cycles(struct clocksource *cs)
{
return *IXP4XX_OSTS;
}
unsigned long ixp4xx_timer_freq = FREQ;
EXPORT_SYMBOL(ixp4xx_timer_freq);
-static int __init ixp4xx_clocksource_init(void)
+static void __init ixp4xx_clocksource_init(void)
{
clocksource_ixp4xx.mult =
clocksource_hz2mult(ixp4xx_timer_freq,
clocksource_ixp4xx.shift);
clocksource_register(&clocksource_ixp4xx);
-
- return 0;
}
/*
.set_next_event = ixp4xx_set_next_event,
};
-static int __init ixp4xx_clockevent_init(void)
+static void __init ixp4xx_clockevent_init(void)
{
clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC,
clockevent_ixp4xx.shift);
clockevent_ixp4xx.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_ixp4xx);
- return 0;
}
static inline void arch_idle(void)
{
+ /* ixp4xx does not implement the XScale PWRMODE register,
+ * so it must not call cpu_do_idle() here.
+ */
#if 0
- if (!hlt_counter)
- cpu_do_idle(0);
+ cpu_do_idle();
#endif
}
_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
- _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
- _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
- _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/iomux.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
+#include <mach/spi.h>
#include "devices.h"
PC6_PF_I2C2_SCL,
/* SPI1 */
PD25_PF_CSPI1_RDY,
- PD27_PF_CSPI1_SS1,
- PD28_PF_CSPI1_SS0,
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
}
};
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+ .chipselect = pcm038_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+ {
+ .dev = &mxc_sdhc_device1.dev,
+ .supply = "sdhc_vcc",
+ },
+};
+
+static struct regulator_init_data sdhc1_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+ .consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+ {
+ .dev = NULL,
+ .supply = "imx_cam_vcc",
+ },
+};
+
+static struct regulator_init_data cam_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+ .consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+ {
+ .id = MC13783_REGU_VCAM,
+ .init_data = &cam_data,
+ }, {
+ .id = MC13783_REGU_VMMC1,
+ .init_data = &sdhc1_data,
+ },
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+ .regulators = pcm038_regulators,
+ .num_regulators = ARRAY_SIZE(pcm038_regulators),
+ .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+ MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .irq = IRQ_GPIOB(23),
+ .max_speed_hz = 300000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &pcm038_pmic,
+ .mode = SPI_CS_HIGH,
+ }
+};
+
static void __init pcm038_init(void)
{
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
/* PE18 for user-LED D40 */
mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+ /* MC13783 IRQ */
+ mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+ mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+ spi_register_board_info(pcm038_spi_board_info,
+ ARRAY_SIZE(pcm038_spi_board_info));
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
- GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
/* display */
PA5_PF_LSCLK,
PA6_PF_LD0,
"PCM970");
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+ mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
platform_device_register(&pcm970_sja1000);
}
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/mx25.h>
#include <mach/irqs.h>
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct mxc_nand_platform_data nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
static void __init mx25pdk_init(void)
{
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
- mxc_register_device(&mxc_nand_device, &nand_board_info);
}
-
static void __init mx25pdk_timer_init(void)
{
mx25_clocks_init(26000000);
_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
_REGISTER_CLOCK(NULL, "admux", admux_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
_REGISTER_CLOCK(NULL, "epit", epit1_clk)
_REGISTER_CLOCK(NULL, "epit", epit2_clk)
* SPI master controller
* 3 channels
*/
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
{
.start = CSPI1_BASE_ADDR,
.end = CSPI1_BASE_ADDR + SZ_4K - 1,
},
};
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
{
.start = CSPI2_BASE_ADDR,
.end = CSPI2_BASE_ADDR + SZ_4K - 1,
},
};
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
{
.start = CSPI3_BASE_ADDR,
.end = CSPI3_BASE_ADDR + SZ_4K - 1,
},
};
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
.name = "spi_imx",
.id = 0,
- .num_resources = ARRAY_SIZE(imx_spi_0_resources),
- .resource = imx_spi_0_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+ .resource = mxc_spi_0_resources,
};
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
.name = "spi_imx",
.id = 1,
- .num_resources = ARRAY_SIZE(imx_spi_1_resources),
- .resource = imx_spi_1_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+ .resource = mxc_spi_1_resources,
};
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
.name = "spi_imx",
.id = 2,
- .num_resources = ARRAY_SIZE(imx_spi_2_resources),
- .resource = imx_spi_2_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+ .resource = mxc_spi_2_resources,
};
#ifdef CONFIG_ARCH_MX35
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+#ifdef CONFIG_ARCH_MX35
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+#endif
void __init mx31_init_irq(void)
{
return single_open(file, clk_debugfs_show, NULL);
}
-static struct file_operations clk_debugfs_operations = {
+static const struct file_operations clk_debugfs_operations = {
.open = clk_debugfs_open,
.read = seq_read,
.llseek = seq_lseek,
static void __init ams_delta_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
omap_board_config = ams_delta_config;
omap_usb_init(&ams_delta_usb_config);
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+ omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
}
static struct plat_serial8250_port ams_delta_modem_ports[] = {
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap15xx()) {
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_usb_init(&generic1510_usb_config);
}
#endif
{
#ifdef CONFIG_ARCH_OMAP15XX
if (cpu_is_omap1510()) {
+ unsigned char reg;
+
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM1_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+
+ reg = fpga_read(OMAP1510_FPGA_POWER);
+ reg |= OMAP1510_FPGA_PCR_COM2_EN;
+ fpga_write(reg, OMAP1510_FPGA_POWER);
+ udelay(10);
+
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
spi_register_board_info(innovator1510_boardinfo,
ARRAY_SIZE(innovator1510_boardinfo));
static void __init omap_palmte_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_board_config = palmte_config;
omap_board_config_size = ARRAY_SIZE(palmte_config);
static void __init omap_palmtt_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
omap_mpu_wdt_mode(0);
omap_board_config = palmtt_config;
static void __init
omap_palmz71_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
palmz71_gpio_setup(1);
omap_mpu_wdt_mode(0);
static void __init omap_sx1_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
omap_board_config = sx1_config;
static void __init voiceblue_init(void)
{
+ /* mux pins for uarts */
+ omap_cfg_reg(UART1_TX);
+ omap_cfg_reg(UART1_RTS);
+ omap_cfg_reg(UART2_TX);
+ omap_cfg_reg(UART2_RTS);
+ omap_cfg_reg(UART3_TX);
+ omap_cfg_reg(UART3_RX);
+
/* Watchdog */
gpio_request(0, "Watchdog");
/* smc91x reset */
{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
- { .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
+ { .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
}
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- unsigned char reg;
-
switch (i) {
case 0:
uart1_ck = clk_get(NULL, "uart1_ck");
if (cpu_is_omap15xx())
clk_set_rate(uart1_ck, 12000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART1_TX);
- omap_cfg_reg(UART1_RTS);
- if (machine_is_omap_innovator()) {
- reg = fpga_read(OMAP1510_FPGA_POWER);
- reg |= OMAP1510_FPGA_PCR_COM1_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
- udelay(10);
- }
- }
break;
case 1:
uart2_ck = clk_get(NULL, "uart2_ck");
else
clk_set_rate(uart2_ck, 48000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART2_TX);
- omap_cfg_reg(UART2_RTS);
- if (machine_is_omap_innovator()) {
- reg = fpga_read(OMAP1510_FPGA_POWER);
- reg |= OMAP1510_FPGA_PCR_COM2_EN;
- fpga_write(reg, OMAP1510_FPGA_POWER);
- udelay(10);
- }
- }
break;
case 2:
uart3_ck = clk_get(NULL, "uart3_ck");
if (cpu_is_omap15xx())
clk_set_rate(uart3_ck, 12000000);
}
- if (cpu_is_omap15xx()) {
- omap_cfg_reg(UART3_TX);
- omap_cfg_reg(UART3_RX);
- }
break;
}
omap_serial_reset(&serial_platform_data[i]);
bool "OMAP 3430 SDP board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_NOKIA_N800
+ bool
+
+config MACH_NOKIA_N810
+ bool
+
+config MACH_NOKIA_N810_WIMAX
+ bool
+
config MACH_NOKIA_N8X0
bool "Nokia N800/N810"
depends on ARCH_OMAP2420
+ select MACH_NOKIA_N800
+ select MACH_NOKIA_N810
+ select MACH_NOKIA_N810_WIMAX
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl4030.h>
#include <mach/gpmc.h>
#include <mach/control.h>
-#include <mach/keypad.h>
#include <mach/gpmc-smc91x.h>
#include "sdram-qimonda-hyb18m512160af-6.h"
#define TWL4030_MSECURE_GPIO 22
-static int sdp3430_keymap[] = {
+static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_A),
0
};
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
static struct twl4030_keypad_data sdp3430_kp_data = {
+ .keymap_data = &board_map_data,
.rows = 5,
.cols = 6,
- .keymap = sdp3430_keymap,
- .keymapsize = ARRAY_SIZE(sdp3430_keymap),
.rep = 1,
};
static void __init omap_4430sdp_init_irq(void)
{
+ omap_board_config = sdp4430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap2_init_common_hw(NULL, NULL);
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(1);
static void __init omap_4430sdp_init(void)
{
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
- omap_board_config = sdp4430_config;
- omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap_serial_init();
}
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include <asm/delay.h>
#include <mach/control.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include "mmc-twl4030.h"
},
};
-static int ldp_twl4030_keymap[] = {
+static int board_keymap[] = {
KEY(0, 0, KEY_1),
KEY(1, 0, KEY_2),
KEY(2, 0, KEY_3),
0
};
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+ .keymap_data = &board_map_data,
.rows = 6,
.cols = 6,
- .keymap = ldp_twl4030_keymap,
- .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap),
.rep = 1,
};
static int beagle_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
+ if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+ omap_cfg_reg(AG9_34XX_GPIO23);
+ mmc[0].gpio_wp = 23;
+ } else {
+ omap_cfg_reg(AH8_34XX_GPIO29);
+ }
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
- omap_cfg_reg(AH8_34XX_GPIO29);
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/leds.h>
#include <linux/spi/spi.h>
#include <mach/usb.h>
#include <mach/common.h>
#include <mach/mcspi.h>
-#include <mach/keypad.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
.usb_mode = T2_USB_MODE_ULPI,
};
-static int omap3evm_keymap[] = {
+static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_A),
KEY(3, 3, KEY_P)
};
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
static struct twl4030_keypad_data omap3evm_kp_data = {
+ .keymap_data = &board_map_data,
.rows = 4,
.cols = 4,
- .keymap = omap3evm_keymap,
- .keymapsize = ARRAY_SIZE(omap3evm_keymap),
.rep = 1,
};
#include <linux/i2c/twl4030.h>
#include <linux/leds.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <mach/mcspi.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include <mach/mux.h>
#include "sdram-micron-mt46h32m32lf-6.h"
omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
}
-static int pandora_keypad_map[] = {
+static int board_keymap[] = {
/* col, row, code */
KEY(0, 0, KEY_9),
KEY(0, 1, KEY_0),
KEY(5, 2, KEY_FN),
};
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
static struct twl4030_keypad_data pandora_kp_data = {
+ .keymap_data = &board_map_data,
.rows = 8,
.cols = 6,
- .keymap = pandora_keypad_map,
- .keymapsize = ARRAY_SIZE(pandora_keypad_map),
.rep = 1,
};
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/i2c.h>
#include <linux/i2c/twl4030.h>
#include <mach/common.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
-#include <mach/keypad.h>
#include <mach/onenand.h>
#include <mach/gpmc-smc91x.h>
#define SYSTEM_REV_B_USES_VAUX3 0x1699
#define SYSTEM_REV_S_USES_VAUX3 0x8
-static int rx51_keymap[] = {
+static int board_keymap[] = {
KEY(0, 0, KEY_Q),
- KEY(0, 1, KEY_W),
- KEY(0, 2, KEY_E),
- KEY(0, 3, KEY_R),
- KEY(0, 4, KEY_T),
- KEY(0, 5, KEY_Y),
- KEY(0, 6, KEY_U),
- KEY(0, 7, KEY_I),
- KEY(1, 0, KEY_O),
+ KEY(0, 1, KEY_O),
+ KEY(0, 2, KEY_P),
+ KEY(0, 3, KEY_COMMA),
+ KEY(0, 4, KEY_BACKSPACE),
+ KEY(0, 6, KEY_A),
+ KEY(0, 7, KEY_S),
+ KEY(1, 0, KEY_W),
KEY(1, 1, KEY_D),
- KEY(1, 2, KEY_DOT),
- KEY(1, 3, KEY_V),
- KEY(1, 4, KEY_DOWN),
- KEY(2, 0, KEY_P),
- KEY(2, 1, KEY_F),
+ KEY(1, 2, KEY_F),
+ KEY(1, 3, KEY_G),
+ KEY(1, 4, KEY_H),
+ KEY(1, 5, KEY_J),
+ KEY(1, 6, KEY_K),
+ KEY(1, 7, KEY_L),
+ KEY(2, 0, KEY_E),
+ KEY(2, 1, KEY_DOT),
KEY(2, 2, KEY_UP),
- KEY(2, 3, KEY_B),
- KEY(2, 4, KEY_RIGHT),
- KEY(3, 0, KEY_COMMA),
- KEY(3, 1, KEY_G),
- KEY(3, 2, KEY_ENTER),
+ KEY(2, 3, KEY_ENTER),
+ KEY(2, 5, KEY_Z),
+ KEY(2, 6, KEY_X),
+ KEY(2, 7, KEY_C),
+ KEY(3, 0, KEY_R),
+ KEY(3, 1, KEY_V),
+ KEY(3, 2, KEY_B),
KEY(3, 3, KEY_N),
- KEY(4, 0, KEY_BACKSPACE),
- KEY(4, 1, KEY_H),
- KEY(4, 3, KEY_M),
+ KEY(3, 4, KEY_M),
+ KEY(3, 5, KEY_SPACE),
+ KEY(3, 6, KEY_SPACE),
+ KEY(3, 7, KEY_LEFT),
+ KEY(4, 0, KEY_T),
+ KEY(4, 1, KEY_DOWN),
+ KEY(4, 2, KEY_RIGHT),
KEY(4, 4, KEY_LEFTCTRL),
- KEY(5, 1, KEY_J),
- KEY(5, 2, KEY_Z),
- KEY(5, 3, KEY_SPACE),
- KEY(5, 4, KEY_LEFTSHIFT),
- KEY(6, 0, KEY_A),
- KEY(6, 1, KEY_K),
- KEY(6, 2, KEY_X),
- KEY(6, 3, KEY_SPACE),
- KEY(6, 4, KEY_FN),
- KEY(7, 0, KEY_S),
- KEY(7, 1, KEY_L),
- KEY(7, 2, KEY_C),
- KEY(7, 3, KEY_LEFT),
- KEY(0xff, 0, KEY_F6),
- KEY(0xff, 1, KEY_F7),
- KEY(0xff, 2, KEY_F8),
- KEY(0xff, 4, KEY_F9),
- KEY(0xff, 5, KEY_F10),
+ KEY(4, 5, KEY_RIGHTALT),
+ KEY(4, 6, KEY_LEFTSHIFT),
+ KEY(5, 0, KEY_Y),
+ KEY(6, 0, KEY_U),
+ KEY(7, 0, KEY_I),
+ KEY(7, 1, KEY_F7),
+ KEY(7, 2, KEY_F8),
+ KEY(0xff, 2, KEY_F9),
+ KEY(0xff, 4, KEY_F10),
+ KEY(0xff, 5, KEY_F11),
+};
+
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
};
static struct twl4030_keypad_data rx51_kp_data = {
+ .keymap_data = &board_map_data,
.rows = 8,
.cols = 8,
- .keymap = rx51_keymap,
- .keymapsize = ARRAY_SIZE(rx51_keymap),
.rep = 1,
};
rx51_twldata.vaux3 = &rx51_vaux3_cam;
rx51_twldata.vmmc2 = &rx51_vmmc2;
}
- omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
+ omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
omap_register_i2c_bus(2, 100, NULL, 0);
omap_register_i2c_bus(3, 400, NULL, 0);
#include <mach/mux.h>
#include <mach/board.h>
#include <mach/common.h>
-#include <mach/keypad.h>
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
#include <linux/gpio.h>
#include <linux/i2c/twl4030.h>
#include <linux/regulator/machine.h>
#include <mach/common.h>
#include <mach/usb.h>
-#include <mach/keypad.h>
#include "mmc-twl4030.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
/* Zoom2 has Qwerty keyboard*/
-static int zoom2_twl4030_keymap[] = {
+static int board_keymap[] = {
KEY(0, 0, KEY_E),
KEY(1, 0, KEY_R),
KEY(2, 0, KEY_T),
0
};
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+ .keymap_data = &board_map_data,
.rows = 8,
.cols = 8,
- .keymap = zoom2_twl4030_keymap,
- .keymapsize = ARRAY_SIZE(zoom2_twl4030_keymap),
.rep = 1,
};
{
omap_board_config = zoom2_config;
omap_board_config_size = ARRAY_SIZE(zoom2_config);
- omap2_init_common_hw(NULL, NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
+ omap2_init_clk_clkdm(c->lk.clk);
}
/* Check the MPU rate set by bootloader */
*/
#define SDRC_MPURATE_LOOPS 96
+/*
+ * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
+ * that are sourced by DPLL5, and both of these require this clock
+ * to be at 120 MHz for proper operation.
+ */
+#define DPLL5_FREQ_FOR_USBHOST 120000000
+
/**
* omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
* @clk: struct clk * being enabled
#endif
}
+static void omap3_clk_lock_dpll5(void)
+{
+ struct clk *dpll5_clk;
+ struct clk *dpll5_m2_clk;
+
+ dpll5_clk = clk_get(NULL, "dpll5_ck");
+ clk_set_rate(dpll5_clk, DPLL5_FREQ_FOR_USBHOST);
+ clk_enable(dpll5_clk);
+
+ /* Enable autoidle to allow it to enter low power bypass */
+ omap3_dpll_allow_idle(dpll5_clk);
+
+ /* Program dpll5_m2_clk divider for no division */
+ dpll5_m2_clk = clk_get(NULL, "dpll5_m2_ck");
+ clk_enable(dpll5_m2_clk);
+ clk_set_rate(dpll5_m2_clk, DPLL5_FREQ_FOR_USBHOST);
+
+ clk_disable(dpll5_m2_clk);
+ clk_disable(dpll5_clk);
+ return;
+}
+
/* REVISIT: Move this init stuff out into clock.c */
/*
*/
clk_enable_init_clocks();
+ /*
+ * Lock DPLL5 and put it in autoidle.
+ */
+ if (omap_rev() >= OMAP3430_REV_ES2_0)
+ omap3_clk_lock_dpll5();
+
/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
/* REVISIT: not yet ready for 343x */
#if 0
}
}
+/*
+ * _omap2_clkdm_set_hwsup - set the hwsup idle transition bit
+ * @clkdm: struct clockdomain *
+ * @enable: int 0 to disable, 1 to enable
+ *
+ * Internal helper for actually switching the bit that controls hwsup
+ * idle transitions for clkdm.
+ */
+static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
+{
+ u32 v;
+
+ if (cpu_is_omap24xx()) {
+ if (enable)
+ v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
+ else
+ v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
+ } else if (cpu_is_omap34xx()) {
+ if (enable)
+ v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
+ else
+ v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
+ } else {
+ BUG();
+ }
+
+ cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
+ v << __ffs(clkdm->clktrctrl_mask),
+ clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+}
static struct clockdomain *_clkdm_lookup(const char *name)
{
*/
void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
{
- u32 v;
-
if (!clkdm)
return;
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
- if (cpu_is_omap24xx())
- v = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
- else if (cpu_is_omap34xx())
- v = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
- else
- BUG();
-
-
- cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
- v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm.ptr->prcm_offs,
- CM_CLKSTCTRL);
+ _omap2_clkdm_set_hwsup(clkdm, 1);
pwrdm_clkdm_state_switch(clkdm);
}
*/
void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
{
- u32 v;
-
if (!clkdm)
return;
pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
clkdm->name);
- if (cpu_is_omap24xx())
- v = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
- else if (cpu_is_omap34xx())
- v = OMAP34XX_CLKSTCTRL_DISABLE_AUTO;
- else
- BUG();
-
- cm_rmw_mod_reg_bits(clkdm->clktrctrl_mask,
- v << __ffs(clkdm->clktrctrl_mask),
- clkdm->pwrdm.ptr->prcm_offs, CM_CLKSTCTRL);
+ _omap2_clkdm_set_hwsup(clkdm, 0);
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
v = omap2_clkdm_clktrctrl_read(clkdm);
if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
- (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+ (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+ /* Disable HW transitions when we are changing deps */
+ _omap2_clkdm_set_hwsup(clkdm, 0);
_clkdm_add_autodeps(clkdm);
- else
+ _omap2_clkdm_set_hwsup(clkdm, 1);
+ } else {
omap2_clkdm_wakeup(clkdm);
+ }
pwrdm_wait_transition(clkdm->pwrdm.ptr);
pwrdm_clkdm_state_switch(clkdm);
v = omap2_clkdm_clktrctrl_read(clkdm);
if ((cpu_is_omap34xx() && v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ||
- (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO))
+ (cpu_is_omap24xx() && v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO)) {
+ /* Disable HW transitions when we are changing deps */
+ _omap2_clkdm_set_hwsup(clkdm, 0);
_clkdm_del_autodeps(clkdm);
- else
+ _omap2_clkdm_set_hwsup(clkdm, 1);
+ } else {
omap2_clkdm_sleep(clkdm);
+ }
pwrdm_clkdm_state_switch(clkdm);
#include <asm/atomic.h>
#include "cm.h"
-#include "cm-regbits-4xxx.h"
/* XXX move this to cm.h */
/* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
*/
int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
{
- int i = 0;
- u8 cm_id;
- u16 prcm_mod_offs;
- u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
-
- cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
- prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
-
- while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
- OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
- (i++ < MAX_MODULE_READY_TIME))
- udelay(1);
-
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ /* FIXME: Add clock manager related code */
+ return 0;
}
};
#endif
-static void omap_init_mcspi(void)
+#ifdef CONFIG_ARCH_OMAP4
+static inline void omap4_mcspi_fixup(void)
{
- if (cpu_is_omap44xx()) {
- omap2_mcspi1_resources[0].start = OMAP4_MCSPI1_BASE;
- omap2_mcspi1_resources[0].end = OMAP4_MCSPI1_BASE + 0xff;
- omap2_mcspi2_resources[0].start = OMAP4_MCSPI2_BASE;
- omap2_mcspi2_resources[0].end = OMAP4_MCSPI2_BASE + 0xff;
- omap2_mcspi3_resources[0].start = OMAP4_MCSPI3_BASE;
- omap2_mcspi3_resources[0].end = OMAP4_MCSPI3_BASE + 0xff;
- omap2_mcspi4_resources[0].start = OMAP4_MCSPI4_BASE;
- omap2_mcspi4_resources[0].end = OMAP4_MCSPI4_BASE + 0xff;
- }
- platform_device_register(&omap2_mcspi1);
- platform_device_register(&omap2_mcspi2);
+ omap2_mcspi1_resources[0].start = OMAP4_MCSPI1_BASE;
+ omap2_mcspi1_resources[0].end = OMAP4_MCSPI1_BASE + 0xff;
+ omap2_mcspi2_resources[0].start = OMAP4_MCSPI2_BASE;
+ omap2_mcspi2_resources[0].end = OMAP4_MCSPI2_BASE + 0xff;
+ omap2_mcspi3_resources[0].start = OMAP4_MCSPI3_BASE;
+ omap2_mcspi3_resources[0].end = OMAP4_MCSPI3_BASE + 0xff;
+ omap2_mcspi4_resources[0].start = OMAP4_MCSPI4_BASE;
+ omap2_mcspi4_resources[0].end = OMAP4_MCSPI4_BASE + 0xff;
+}
+#else
+static inline void omap4_mcspi_fixup(void)
+{
+}
+#endif
+
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
defined(CONFIG_ARCH_OMAP4)
- if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
- platform_device_register(&omap2_mcspi3);
+static inline void omap2_mcspi3_init(void)
+{
+ platform_device_register(&omap2_mcspi3);
+}
+#else
+static inline void omap2_mcspi3_init(void)
+{
+}
#endif
+
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
- if (cpu_is_omap343x() || cpu_is_omap44xx())
- platform_device_register(&omap2_mcspi4);
+static inline void omap2_mcspi4_init(void)
+{
+ platform_device_register(&omap2_mcspi4);
+}
+#else
+static inline void omap2_mcspi4_init(void)
+{
+}
#endif
+
+static void omap_init_mcspi(void)
+{
+ if (cpu_is_omap44xx())
+ omap4_mcspi_fixup();
+
+ platform_device_register(&omap2_mcspi1);
+ platform_device_register(&omap2_mcspi2);
+
+ if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
+ omap2_mcspi3_init();
+
+ if (cpu_is_omap343x() || cpu_is_omap44xx())
+ omap2_mcspi4_init();
}
#else
else if (cpu_is_omap34xx())
hwmods = omap34xx_hwmods;
- omap_hwmod_init(hwmods);
- omap2_mux_init();
#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
/* The OPP tables have to be registered before a clk init */
+ omap_hwmod_init(hwmods);
+ omap2_mux_init();
omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
+#endif
omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
omap_hwmod_late_init();
omap_pm_if_init();
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
l = iommu_read_reg(obj, MMU_SYSSTATUS);
if (l & MMU_SYS_RESETDONE)
break;
- } while (time_after(jiffies, timeout));
+ } while (!time_after(jiffies, timeout));
if (!(l & MMU_SYS_RESETDONE)) {
dev_err(obj->dev, "can't take mmu out of reset\n");
#define MAILBOX_IRQ_NEWMSG(u) (1 << (2 * (u)))
#define MAILBOX_IRQ_NOTFULL(u) (1 << (2 * (u) + 1))
+/* SYSCONFIG: register bit definition */
+#define AUTOIDLE (1 << 0)
+#define SOFTRESET (1 << 1)
+#define SMARTIDLE (2 << 3)
+
+/* SYSSTATUS: register bit definition */
+#define RESETDONE (1 << 0)
+
#define MBOX_REG_SIZE 0x120
#define MBOX_NR_REGS (MBOX_REG_SIZE / sizeof(u32))
/* Mailbox H/W preparations */
static int omap2_mbox_startup(struct omap_mbox *mbox)
{
- unsigned int l;
+ u32 l;
+ unsigned long timeout;
mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
if (IS_ERR(mbox_ick_handle)) {
- printk("Could not get mailboxes_ick\n");
+ pr_err("Can't get mailboxes_ick\n");
return -ENODEV;
}
clk_enable(mbox_ick_handle);
+ mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+ timeout = jiffies + msecs_to_jiffies(20);
+ do {
+ l = mbox_read_reg(MAILBOX_SYSSTATUS);
+ if (l & RESETDONE)
+ break;
+ } while (!time_after(jiffies, timeout));
+
+ if (!(l & RESETDONE)) {
+ pr_err("Can't take mmu out of reset\n");
+ return -ENODEV;
+ }
+
l = mbox_read_reg(MAILBOX_REVISION);
pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
- /* set smart-idle & autoidle */
- l = mbox_read_reg(MAILBOX_SYSCONFIG);
- l |= 0x00000011;
+ l = SMARTIDLE | AUTOIDLE;
mbox_write_reg(l, MAILBOX_SYSCONFIG);
omap2_mbox_enable_irq(mbox, IRQ_RX);
u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
mbox_write_reg(bit, p->irqstatus);
+
+ /* Flush posted write for irq status to avoid spurious interrupts */
+ mbox_read_reg(p->irqstatus);
}
static int omap2_mbox_is_irq(struct omap_mbox *mbox,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
+ OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
printk(KERN_ERR "%s: only OMAP3 supported\n", __func__);
return -ENODEV;
}
-
+
d = debugfs_create_dir("pm_debug", NULL);
if (IS_ERR(d))
return PTR_ERR(d);
(void) debugfs_create_file("time", S_IRUGO,
d, (void *)DEBUG_FILE_TIMERS, &debug_fops);
- pwrdm_for_each(pwrdms_setup, (void *)d);
+ pwrdm_for_each_nolock(pwrdms_setup, (void *)d);
pm_dbg_dir = debugfs_create_dir("registers", d);
if (IS_ERR(pm_dbg_dir))
static struct powerdomain *mpu_pwrdm;
-/* PRCM Interrupt Handler for wakeups */
-static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+/*
+ * PRCM Interrupt Handler Helper Function
+ *
+ * The purpose of this function is to clear any wake-up events latched
+ * in the PRCM PM_WKST_x registers. It is possible that a wake-up event
+ * may occur whilst attempting to clear a PM_WKST_x register and thus
+ * set another bit in this register. A while loop is used to ensure
+ * that any peripheral wake-up events occurring while attempting to
+ * clear the PM_WKST_x are detected and cleared.
+ */
+static int prcm_clear_mod_irqs(s16 module, u8 regs)
{
- u32 wkst, irqstatus_mpu;
- u32 fclk, iclk;
-
- /* WKUP */
- wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ u32 wkst, fclk, iclk, clken;
+ u16 wkst_off = (regs == 3) ? OMAP3430ES2_PM_WKST3 : PM_WKST1;
+ u16 fclk_off = (regs == 3) ? OMAP3430ES2_CM_FCLKEN3 : CM_FCLKEN1;
+ u16 iclk_off = (regs == 3) ? CM_ICLKEN3 : CM_ICLKEN1;
+ u16 grpsel_off = (regs == 3) ?
+ OMAP3430ES2_PM_MPUGRPSEL3 : OMAP3430_PM_MPUGRPSEL;
+ int c = 0;
+
+ wkst = prm_read_mod_reg(module, wkst_off);
+ wkst &= prm_read_mod_reg(module, grpsel_off);
if (wkst) {
- iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
- fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
- prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
- while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
- cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+ iclk = cm_read_mod_reg(module, iclk_off);
+ fclk = cm_read_mod_reg(module, fclk_off);
+ while (wkst) {
+ clken = wkst;
+ cm_set_mod_reg_bits(clken, module, iclk_off);
+ /*
+ * For USBHOST, we don't know whether HOST1 or
+ * HOST2 woke us up, so enable both f-clocks
+ */
+ if (module == OMAP3430ES2_USBHOST_MOD)
+ clken |= 1 << OMAP3430ES2_EN_USBHOST2_SHIFT;
+ cm_set_mod_reg_bits(clken, module, fclk_off);
+ prm_write_mod_reg(wkst, module, wkst_off);
+ wkst = prm_read_mod_reg(module, wkst_off);
+ c++;
+ }
+ cm_write_mod_reg(iclk, module, iclk_off);
+ cm_write_mod_reg(fclk, module, fclk_off);
}
- /* CORE */
- wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
- if (wkst) {
- iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
- fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
- prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
- while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
- cpu_relax();
- cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
- cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
- }
- wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
- if (wkst) {
- iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
- fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
- cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
- while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
- cpu_relax();
- cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
- cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
- }
+ return c;
+}
- /* PER */
- wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
- if (wkst) {
- iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
- fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
- prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
- while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
- cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
- }
+static int _prcm_int_handle_wakeup(void)
+{
+ int c;
+ c = prcm_clear_mod_irqs(WKUP_MOD, 1);
+ c += prcm_clear_mod_irqs(CORE_MOD, 1);
+ c += prcm_clear_mod_irqs(OMAP3430_PER_MOD, 1);
if (omap_rev() > OMAP3430_REV_ES1_0) {
- /* USBHOST */
- wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
- if (wkst) {
- iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
- PM_WKST);
- while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
- PM_WKST))
- cpu_relax();
- cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
- CM_ICLKEN);
- cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
- CM_FCLKEN);
- }
+ c += prcm_clear_mod_irqs(CORE_MOD, 3);
+ c += prcm_clear_mod_irqs(OMAP3430ES2_USBHOST_MOD, 1);
}
- irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
- OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ return c;
+}
+
+/*
+ * PRCM Interrupt Handler
+ *
+ * The PRM_IRQSTATUS_MPU register indicates if there are any pending
+ * interrupts from the PRCM for the MPU. These bits must be cleared in
+ * order to clear the PRCM interrupt. The PRCM interrupt handler is
+ * implemented to simply clear the PRM_IRQSTATUS_MPU in order to clear
+ * the PRCM interrupt. Please note that bit 0 of the PRM_IRQSTATUS_MPU
+ * register indicates that a wake-up event is pending for the MPU and
+ * this bit can only be cleared if the all the wake-up events latched
+ * in the various PM_WKST_x registers have been cleared. The interrupt
+ * handler is implemented using a do-while loop so that if a wake-up
+ * event occurred during the processing of the prcm interrupt handler
+ * (setting a bit in the corresponding PM_WKST_x register and thus
+ * preventing us from clearing bit 0 of the PRM_IRQSTATUS_MPU register)
+ * this would be handled.
+ */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+ u32 irqstatus_mpu;
+ int c = 0;
+
+ do {
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ if (irqstatus_mpu & (OMAP3430_WKUP_ST | OMAP3430_IO_ST)) {
+ c = _prcm_int_handle_wakeup();
+
+ /*
+ * Is the MPU PRCM interrupt handler racing with the
+ * IVA2 PRCM interrupt handler ?
+ */
+ WARN(c == 0, "prcm: WARNING: PRCM indicated MPU wakeup "
+ "but no wakeup sources are marked\n");
+ } else {
+ /* XXX we need to expand our PRCM interrupt handler */
+ WARN(1, "prcm: WARNING: PRCM interrupt received, but "
+ "no code to handle it (%08x)\n", irqstatus_mpu);
+ }
+
+ prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
- while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
- cpu_relax();
+ } while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET));
return IRQ_HANDLED;
}
prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+ /* Enable wakeups in PER */
+ prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
+ OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
+ OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_PER_MOD, PM_WKEN);
+ /* and allow them to wake up MPU */
+ prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
+ OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
+ OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+ OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+
/* Don't attach IVA interrupts */
prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
}
/**
- * pwrdm_for_each - call function on each registered clockdomain
+ * pwrdm_for_each_nolock - call function on each registered clockdomain
* @fn: callback function *
*
* Call the supplied function for each registered powerdomain. The
* callback function can return anything but 0 to bail out early from
- * the iterator. The callback function is called with the pwrdm_rwlock
- * held for reading, so no powerdomain structure manipulation
- * functions should be called from the callback, although hardware
- * powerdomain control functions are fine. Returns the last return
- * value of the callback function, which should be 0 for success or
- * anything else to indicate failure; or -EINVAL if the function
- * pointer is null.
+ * the iterator. Returns the last return value of the callback function, which
+ * should be 0 for success or anything else to indicate failure; or -EINVAL if
+ * the function pointer is null.
*/
-int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
- void *user)
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
{
struct powerdomain *temp_pwrdm;
- unsigned long flags;
int ret = 0;
if (!fn)
return -EINVAL;
- read_lock_irqsave(&pwrdm_rwlock, flags);
list_for_each_entry(temp_pwrdm, &pwrdm_list, node) {
ret = (*fn)(temp_pwrdm, user);
if (ret)
break;
}
+
+ return ret;
+}
+
+/**
+ * pwrdm_for_each - call function on each registered clockdomain
+ * @fn: callback function *
+ *
+ * This function is the same as 'pwrdm_for_each_nolock()', but keeps the
+ * &pwrdm_rwlock locked for reading, so no powerdomain structure manipulation
+ * functions should be called from the callback, although hardware powerdomain
+ * control functions are fine.
+ */
+int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user)
+{
+ unsigned long flags;
+ int ret;
+
+ read_lock_irqsave(&pwrdm_rwlock, flags);
+ ret = pwrdm_for_each_nolock(fn, user);
read_unlock_irqrestore(&pwrdm_rwlock, flags);
return ret;
.regshift = 2,
.uartclk = OMAP24XX_BASE_BAUD * 16,
}, {
-#ifdef CONFIG_ARCH_OMAP4
- .membase = IO_ADDRESS(OMAP_UART4_BASE),
- .mapbase = OMAP_UART4_BASE,
- .irq = 70,
- .flags = UPF_BOOT_AUTOCONF,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = OMAP24XX_BASE_BAUD * 16,
- }, {
-#endif
.flags = 0
}
};
#ifdef CONFIG_ARCH_OMAP4
static struct plat_serial8250_port serial_platform_data3[] = {
{
- .membase = IO_ADDRESS(OMAP_UART4_BASE),
+ .membase = OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
.mapbase = OMAP_UART4_BASE,
.irq = 70,
.flags = UPF_BOOT_AUTOCONF,
{
.pdev = {
.name = "serial8250",
- .id = 3
+ .id = 3,
.dev = {
.platform_data = serial_platform_data3,
},
config CPU_PXA935
bool "PXA935 (codename Tavor-P65)"
+ select CPU_PXA930
+
+config CPU_PXA950
+ bool "PXA950 (codename Tavor-PV2)"
+ select CPU_PXA930
endmenu
bool "Nec Mobilepro 900/c"
select PXA25x
+config MACH_BALLOON3
+ bool "Balloon 3 board"
+ select PXA27x
+ select IWMMXT
+ select PXA_HAVE_BOARD_IRQS
+
config ARCH_PXA_IDP
bool "Accelent Xscale IDP"
select PXA25x
Say Y here if you intend to run this kernel on a Palm Tungsten|E2
handheld computer.
+config MACH_PALMTC
+ bool "Palm Tungsten|C"
+ default y
+ depends on ARCH_PXA_PALM
+ select PXA25x
+ help
+ Say Y here if you intend to run this kernel on a Palm Tungsten|C
+ handheld computer.
+
config MACH_PALMT5
bool "Palm Tungsten|T5"
default y
select PXA27x
select IWMMXT
select HAVE_PWM
+ select PXA_HAVE_BOARD_IRQS
config MACH_EZX_A780
bool "Motorola EZX A780"
default y
depends on PXA_EZX
+config MACH_XCEP
+ bool "Iskratel Electronics XCEP"
+ select PXA25x
+ select MTD
+ select MTD_PARTITIONS
+ select MTD_PHYSMAP
+ select MTD_CFI_INTELEXT
+ select MTD_CFI
+ select MTD_CHAR
+ select SMC91X
+ select PXA_SSP
+ help
+ PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+ Tuned for usage in Libera instruments for particle accelerators.
+
endmenu
config PXA25x
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
obj-$(CONFIG_MACH_MAINSTONE) += mainstone.o
+obj-$(CONFIG_MACH_BALLOON3) += balloon3.o
obj-$(CONFIG_MACH_MP900C) += mp900.o
obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
obj-$(CONFIG_MACH_E400) += e400.o
obj-$(CONFIG_MACH_E800) += e800.o
obj-$(CONFIG_MACH_PALMTE2) += palmte2.o
+obj-$(CONFIG_MACH_PALMTC) += palmtc.o
obj-$(CONFIG_MACH_PALMT5) += palmt5.o
obj-$(CONFIG_MACH_PALMTX) += palmtx.o
obj-$(CONFIG_MACH_PALMLD) += palmld.o
obj-$(CONFIG_MACH_CM_X300) += cm-x300.o
obj-$(CONFIG_PXA_EZX) += ezx.o
+obj-$(CONFIG_MACH_XCEP) += xcep.o
+
obj-$(CONFIG_MACH_INTELMOTE2) += imote2.o
obj-$(CONFIG_MACH_STARGATE2) += stargate2.o
obj-$(CONFIG_MACH_CSB726) += csb726.o
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/balloon3.c
+ *
+ * Support for Balloonboard.org Balloon3 board.
+ *
+ * Author: Nick Bane, Wookey, Jonathan McDowell
+ * Created: June, 2006
+ * Copyright: Toby Churchill Ltd
+ * Derived from mainstone.c, by Nico Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+ (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+ (1 << BALLOON3_FEATURE_AUDIO) |
+ (1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+ return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+ if (!arg)
+ return 0;
+
+ return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+static void balloon3_mask_irq(unsigned int irq)
+{
+ int balloon3_irq = (irq - BALLOON3_IRQ(0));
+ balloon3_irq_enabled &= ~(1 << balloon3_irq);
+ __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+ int balloon3_irq = (irq - BALLOON3_IRQ(0));
+ balloon3_irq_enabled |= (1 << balloon3_irq);
+ __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+ .name = "FPGA",
+ .ack = balloon3_mask_irq,
+ .mask = balloon3_mask_irq,
+ .unmask = balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+ balloon3_irq_enabled;
+
+ do {
+ /* clear useless edge notification */
+ if (desc->chip->ack)
+ desc->chip->ack(BALLOON3_AUX_NIRQ);
+ while (pending) {
+ irq = BALLOON3_IRQ(0) + __ffs(pending);
+ generic_handle_irq(irq);
+ pending &= pending - 1;
+ }
+ pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+ balloon3_irq_enabled;
+ } while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+ int irq;
+
+ pxa27x_init_irq();
+ /* setup extra Balloon3 irqs */
+ for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+ set_irq_chip(irq, &balloon3_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ }
+
+ set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+ set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+ pr_debug("%s: chained handler installed - irq %d automatically "
+ "enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+static void balloon3_backlight_power(int on)
+{
+ pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
+ gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static unsigned long balloon3_lcd_pin_config[] = {
+ /* LCD - 16bpp Active TFT */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ GPIO99_GPIO, /* Backlight */
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+ {
+ .pixclock = 38000,
+ .xres = 480,
+ .yres = 640,
+ .bpp = 16,
+ .hsync_len = 8,
+ .left_margin = 8,
+ .right_margin = 8,
+ .vsync_len = 2,
+ .upper_margin = 4,
+ .lower_margin = 5,
+ .sync = 0,
+ },
+};
+
+static struct pxafb_mach_info balloon3_pxafb_info = {
+ .modes = balloon3_lcd_modes,
+ .num_modes = ARRAY_SIZE(balloon3_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+ .pxafb_backlight_power = balloon3_backlight_power,
+};
+
+static unsigned long balloon3_mmc_pin_config[] = {
+ GPIO32_MMC_CLK,
+ GPIO92_MMC_DAT_0,
+ GPIO109_MMC_DAT_1,
+ GPIO110_MMC_DAT_2,
+ GPIO111_MMC_DAT_3,
+ GPIO112_MMC_CMD,
+};
+
+static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
+{
+ struct pxamci_platform_data *p_d = dev->platform_data;
+
+ if ((1 << vdd) & p_d->ocr_mask) {
+ pr_debug("%s: on\n", __func__);
+ /* FIXME something to prod here? */
+ } else {
+ pr_debug("%s: off\n", __func__);
+ /* FIXME something to prod here? */
+ }
+}
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .setpower = balloon3_mci_setpower,
+};
+
+static int balloon3_udc_is_connected(void)
+{
+ pr_debug("%s: udc connected\n", __func__);
+ return 1;
+}
+
+static void balloon3_udc_command(int cmd)
+{
+ switch (cmd) {
+ case PXA2XX_UDC_CMD_CONNECT:
+ UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
+ pr_debug("%s: connect\n", __func__);
+ break;
+ case PXA2XX_UDC_CMD_DISCONNECT:
+ UP2OCR &= ~UP2OCR_DPPUE;
+ pr_debug("%s: disconnect\n", __func__);
+ break;
+ }
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info = {
+ .udc_is_connected = balloon3_udc_is_connected,
+ .udc_command = balloon3_udc_command,
+};
+
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+};
+
+static unsigned long balloon3_ohci_pin_config[] = {
+ GPIO88_USBH1_PWR,
+ GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_platform_data = {
+ .port_mode = PMM_PERPORT_MODE,
+ .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static unsigned long balloon3_pin_config[] __initdata = {
+ /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Wakeup GPIO */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+ /* NAND & IDLE LED GPIOs */
+ GPIO9_GPIO,
+ GPIO10_GPIO,
+};
+
+static struct gpio_led balloon3_gpio_leds[] = {
+ {
+ .name = "balloon3:green:idle",
+ .default_trigger = "heartbeat",
+ .gpio = BALLOON3_GPIO_LED_IDLE,
+ .active_low = 1,
+ },
+ {
+ .name = "balloon3:green:nand",
+ .default_trigger = "nand-disk",
+ .gpio = BALLOON3_GPIO_LED_NAND,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
+ .leds = balloon3_gpio_leds,
+ .num_leds = ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3led_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &balloon3_gpio_leds_platform_data,
+ },
+};
+
+static void __init balloon3_init(void)
+{
+ pr_info("Initialising Balloon3\n");
+
+ /* system bus arbiter setting
+ * - Core_Park
+ * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+ */
+ ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+ pxa_set_i2c_info(NULL);
+ if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+ pxa_set_ac97_info(NULL);
+
+ if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+ gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
+ "LCD Backlight Power");
+ gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+ set_pxa_fb_info(&balloon3_pxafb_info);
+ }
+
+ if (balloon3_has(BALLOON3_FEATURE_MMC)) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+ pxa_set_mci_info(&balloon3_mci_platform_data);
+ }
+ pxa_set_ficp_info(&balloon3_ficp_platform_data);
+ if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
+ pxa_set_ohci_info(&balloon3_ohci_platform_data);
+ }
+ pxa_set_udc_info(&balloon3_udc_info);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+ platform_device_register(&balloon3led_device);
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+ { /* CPLD/FPGA */
+ .virtual = BALLOON3_FPGA_VIRT,
+ .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS),
+ .length = BALLOON3_FPGA_LENGTH,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init balloon3_map_io(void)
+{
+ pxa_map_io();
+ iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+ /* Maintainer: Nick Bane. */
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = balloon3_map_io,
+ .init_irq = balloon3_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = balloon3_init,
+ .boot_params = PHYS_OFFSET + 0x100,
+MACHINE_END
unsigned int cken;
unsigned int delay;
unsigned int enabled;
- struct clk *other;
};
#define INIT_CLKREG(_clk,_devname,_conname) \
#include <linux/sysdev.h>
#include <linux/irq.h>
#include <linux/gpio.h>
+#include <linux/delay.h>
#include <linux/rtc-v3020.h>
#include <video/mbxfb.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+
#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
+#include <mach/pxa2xx_spi.h>
#include "generic.h"
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP (19)
+#define GPIO102_WLAN_RST (102)
+
static unsigned long cmx270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
GPIO26_SSP1_RXD,
/* SSP2 */
- GPIO19_SSP2_SCLK,
- GPIO14_SSP2_SFRM,
+ GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */
+ GPIO14_GPIO,
GPIO87_SSP2_TXD,
GPIO88_SSP2_RXD,
GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,
GPIO105_GPIO | MFP_LPM_DRIVE_HIGH, /* MMC/SD power */
GPIO53_GPIO, /* PC card reset */
+ GPIO102_GPIO, /* WLAN reset */
/* NAND controls */
GPIO11_GPIO | MFP_LPM_DRIVE_HIGH, /* NAND CE# */
/* interrupts */
GPIO10_GPIO, /* DM9000 interrupt */
GPIO83_GPIO, /* MMC card detect */
+ GPIO95_GPIO, /* WLAN interrupt */
};
/* V3020 RTC */
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static int cmx270_mci_init(struct device *dev,
- irq_handler_t cmx270_detect_int,
- void *data)
+static struct pxamci_platform_data cmx270_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO83_MMC_IRQ,
+ .gpio_card_ro = -1,
+ .gpio_power = GPIO105_MMC_POWER,
+ .gpio_power_invert = 1,
+};
+
+static void __init cmx270_init_mmc(void)
{
- int err;
+ pxa_set_mci_info(&cmx270_mci_platform_data);
+}
+#else
+static inline void cmx270_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+ .num_chipselect = 1,
+ .enable_dma = 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .timeout = 1000,
+ .gpio_cs = 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+ /* SSP2 */
+ GPIO19_SSP2_SCLK,
+ GPIO14_GPIO,
+ GPIO87_SSP2_TXD,
+ GPIO88_SSP2_RXD,
+
+};
- err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
- if (err) {
- dev_warn(dev, "power gpio unavailable\n");
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+ int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+ if (err)
return err;
- }
- gpio_direction_output(GPIO105_MMC_POWER, 0);
+ err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+ if (err)
+ goto err_free_strap;
- err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- gpio_free(GPIO105_MMC_POWER);
- dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
- " request MMC card detect IRQ\n");
- }
+ err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+ if (err)
+ goto err_free_strap;
+ msleep(100);
+
+ err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+ if (err)
+ goto err_free_strap;
+ msleep(100);
+
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+ gpio_set_value(GPIO102_WLAN_RST, 1);
+ msleep(100);
+
+ spi->bits_per_word = 16;
+ spi_setup(spi);
+
+ return 0;
+
+err_free_strap:
+ gpio_free(GPIO19_WLAN_STRAP);
return err;
}
-static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
+static int cm_x270_libertas_teardown(struct spi_device *spi)
{
- struct pxamci_platform_data *p_d = dev->platform_data;
-
- if ((1 << vdd) & p_d->ocr_mask) {
- dev_dbg(dev, "power on\n");
- gpio_set_value(GPIO105_MMC_POWER, 0);
- } else {
- gpio_set_value(GPIO105_MMC_POWER, 1);
- dev_dbg(dev, "power off\n");
- }
-}
+ gpio_set_value(GPIO102_WLAN_RST, 0);
+ gpio_free(GPIO102_WLAN_RST);
+ gpio_free(GPIO19_WLAN_STRAP);
-static void cmx270_mci_exit(struct device *dev, void *data)
-{
- free_irq(CMX270_MMC_IRQ, data);
- gpio_free(GPIO105_MMC_POWER);
+ return 0;
}
-static struct pxamci_platform_data cmx270_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cmx270_mci_init,
- .setpower = cmx270_mci_setpower,
- .exit = cmx270_mci_exit,
+struct libertas_spi_platform_data cm_x270_libertas_pdata = {
+ .use_dummy_writes = 1,
+ .setup = cm_x270_libertas_setup,
+ .teardown = cm_x270_libertas_teardown,
};
-static void __init cmx270_init_mmc(void)
+static struct spi_board_info cm_x270_spi_devices[] __initdata = {
+ {
+ .modalias = "libertas_spi",
+ .max_speed_hz = 13000000,
+ .bus_num = 2,
+ .irq = gpio_to_irq(95),
+ .chip_select = 0,
+ .controller_data = &cm_x270_libertas_chip,
+ .platform_data = &cm_x270_libertas_pdata,
+ },
+};
+
+static void __init cmx270_init_spi(void)
{
- pxa_set_mci_info(&cmx270_mci_platform_data);
+ pxa2xx_set_spi_info(2, &cm_x270_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
}
#else
-static inline void cmx270_init_mmc(void) {}
+static inline void cmx270_init_spi(void) {}
#endif
void __init cmx270_init(void)
cmx270_init_mmc();
cmx270_init_ohci();
cmx270_init_2700G();
+ cmx270_init_spi();
}
#define CM_X300_ETH_PHYS 0x08000010
-#define GPIO82_MMC2_IRQ (82)
-#define GPIO85_MMC2_WP (85)
+#define GPIO82_MMC_IRQ (82)
+#define GPIO85_MMC_WP (85)
-#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ)
#define GPIO95_RTC_CS (95)
#define GPIO96_RTC_WR (96)
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
- no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
- irq_handler_t cm_x300_detect_int,
- void *data)
-{
- return 0;
-}
-
-static void cm_x300_mci_exit(struct device *dev, void *data)
-{
-}
-
static struct pxamci_platform_data cm_x300_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cm_x300_mci_init,
- .exit = cm_x300_mci_exit,
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO82_MMC_IRQ,
+ .gpio_card_ro = GPIO85_MMC_WP,
+ .gpio_power = -1,
};
-static int cm_x300_mci2_ro(struct device *dev)
-{
- return gpio_get_value(GPIO85_MMC2_WP);
-}
-
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
+ no detection/ro pins */
static int cm_x300_mci2_init(struct device *dev,
irq_handler_t cm_x300_detect_int,
- void *data)
+ void *data)
{
- int err;
-
- /*
- * setup GPIO for CM-X300 MMC controller
- */
- err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
- if (err)
- goto err_request_cd;
- gpio_direction_input(GPIO82_MMC2_IRQ);
-
- err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
- if (err)
- goto err_request_wp;
- gpio_direction_input(GPIO85_MMC2_WP);
-
- err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: MMC/SD/SDIO: "
- "can't request card detect IRQ\n", __func__);
- goto err_request_irq;
- }
-
return 0;
-
-err_request_irq:
- gpio_free(GPIO85_MMC2_WP);
-err_request_wp:
- gpio_free(GPIO82_MMC2_IRQ);
-err_request_cd:
- return err;
}
static void cm_x300_mci2_exit(struct device *dev, void *data)
{
- free_irq(CM_X300_MMC2_IRQ, data);
- gpio_free(GPIO82_MMC2_IRQ);
- gpio_free(GPIO85_MMC2_WP);
}
static struct pxamci_platform_data cm_x300_mci2_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cm_x300_mci2_init,
- .exit = cm_x300_mci2_exit,
- .get_ro = cm_x300_mci2_ro,
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = cm_x300_mci2_init,
+ .exit = cm_x300_mci2_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init cm_x300_init_mmc(void)
{
colibri_pxa300_init_eth();
colibri_pxa300_init_ohci();
+ colibri_pxa3xx_init_nand();
colibri_pxa300_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
colibri_pxa310_init_ac97();
static inline void colibri_pxa320_init_ac97(void) {}
#endif
+/*
+ * The following configuration is verified to work with the Toradex Orchid
+ * carrier board
+ */
+static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
+ /* UART 1 configuration (may be set by bootloader) */
+ GPIO99_UART1_CTS,
+ GPIO104_UART1_RTS,
+ GPIO97_UART1_RXD,
+ GPIO98_UART1_TXD,
+ GPIO101_UART1_DTR,
+ GPIO103_UART1_DSR,
+ GPIO100_UART1_DCD,
+ GPIO102_UART1_RI,
+
+ /* UART 2 configuration */
+ GPIO109_UART2_CTS,
+ GPIO112_UART2_RTS,
+ GPIO110_UART2_RXD,
+ GPIO111_UART2_TXD,
+
+ /* UART 3 configuration */
+ GPIO30_UART3_RXD,
+ GPIO31_UART3_TXD,
+};
+
+static void __init colibri_pxa320_init_uart(void)
+{
+ pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
+}
+
void __init colibri_pxa320_init(void)
{
colibri_pxa320_init_eth();
colibri_pxa320_init_ohci();
+ colibri_pxa3xx_init_nand();
colibri_pxa320_init_lcd();
colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
colibri_pxa320_init_ac97();
colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
mfp_to_gpio(MFP_PIN_GPIO28));
+ colibri_pxa320_init_uart();
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
#include <mach/colibri.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
+#include <mach/pxa3xx_nand.h>
#include "generic.h"
#include "devices.h"
}
static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = colibri_pxa3xx_mci_init,
- .exit = colibri_pxa3xx_mci_exit,
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = colibri_pxa3xx_mci_init,
+ .exit = colibri_pxa3xx_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
}
#endif
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition colibri_nand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_512K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "reserved",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_1M,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "fs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct pxa3xx_nand_platform_data colibri_nand_info = {
+ .enable_arbiter = 1,
+ .keep_config = 1,
+ .parts = colibri_nand_partitions,
+ .nr_parts = ARRAY_SIZE(colibri_nand_partitions),
+};
+
+void __init colibri_pxa3xx_init_nand(void)
+{
+ pxa3xx_set_nand_info(&colibri_nand_info);
+}
+#endif
+
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
#include <video/w100fb.h>
#include <asm/setup.h>
GPIO6_MMC_CLK,
GPIO8_MMC_CS0,
+ /* GPIO Matrix Keypad */
+ GPIO66_GPIO, /* column 0 */
+ GPIO67_GPIO, /* column 1 */
+ GPIO68_GPIO, /* column 2 */
+ GPIO69_GPIO, /* column 3 */
+ GPIO70_GPIO, /* column 4 */
+ GPIO71_GPIO, /* column 5 */
+ GPIO72_GPIO, /* column 6 */
+ GPIO73_GPIO, /* column 7 */
+ GPIO74_GPIO, /* column 8 */
+ GPIO75_GPIO, /* column 9 */
+ GPIO76_GPIO, /* column 10 */
+ GPIO77_GPIO, /* column 11 */
+ GPIO58_GPIO, /* row 0 */
+ GPIO59_GPIO, /* row 1 */
+ GPIO60_GPIO, /* row 2 */
+ GPIO61_GPIO, /* row 3 */
+ GPIO62_GPIO, /* row 4 */
+ GPIO63_GPIO, /* row 5 */
+ GPIO64_GPIO, /* row 6 */
+ GPIO65_GPIO, /* row 7 */
+
/* GPIO */
GPIO9_GPIO, /* CORGI_GPIO_nSD_DETECT */
GPIO7_GPIO, /* CORGI_GPIO_nSD_WP */
/*
* Corgi Keyboard Device
*/
+#define CORGI_KEY_CALENDER KEY_F1
+#define CORGI_KEY_ADDRESS KEY_F2
+#define CORGI_KEY_FN KEY_F3
+#define CORGI_KEY_CANCEL KEY_F4
+#define CORGI_KEY_OFF KEY_SUSPEND
+#define CORGI_KEY_EXOK KEY_F5
+#define CORGI_KEY_EXCANCEL KEY_F6
+#define CORGI_KEY_EXJOGDOWN KEY_F7
+#define CORGI_KEY_EXJOGUP KEY_F8
+#define CORGI_KEY_JAP1 KEY_LEFTCTRL
+#define CORGI_KEY_JAP2 KEY_LEFTALT
+#define CORGI_KEY_MAIL KEY_F10
+#define CORGI_KEY_OK KEY_F11
+#define CORGI_KEY_MENU KEY_F12
+
+static const uint32_t corgikbd_keymap[] = {
+ KEY(0, 1, KEY_1),
+ KEY(0, 2, KEY_3),
+ KEY(0, 3, KEY_5),
+ KEY(0, 4, KEY_6),
+ KEY(0, 5, KEY_7),
+ KEY(0, 6, KEY_9),
+ KEY(0, 7, KEY_0),
+ KEY(0, 8, KEY_BACKSPACE),
+ KEY(1, 1, KEY_2),
+ KEY(1, 2, KEY_4),
+ KEY(1, 3, KEY_R),
+ KEY(1, 4, KEY_Y),
+ KEY(1, 5, KEY_8),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_O),
+ KEY(1, 8, KEY_P),
+ KEY(2, 0, KEY_TAB),
+ KEY(2, 1, KEY_Q),
+ KEY(2, 2, KEY_E),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_G),
+ KEY(2, 5, KEY_U),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_K),
+ KEY(3, 0, CORGI_KEY_CALENDER),
+ KEY(3, 1, KEY_W),
+ KEY(3, 2, KEY_S),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_V),
+ KEY(3, 5, KEY_H),
+ KEY(3, 6, KEY_M),
+ KEY(3, 7, KEY_L),
+ KEY(3, 9, KEY_RIGHTSHIFT),
+ KEY(4, 0, CORGI_KEY_ADDRESS),
+ KEY(4, 1, KEY_A),
+ KEY(4, 2, KEY_D),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_B),
+ KEY(4, 5, KEY_N),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 8, KEY_ENTER),
+ KEY(4, 10, KEY_LEFTSHIFT),
+ KEY(5, 0, CORGI_KEY_MAIL),
+ KEY(5, 1, KEY_Z),
+ KEY(5, 2, KEY_X),
+ KEY(5, 3, KEY_MINUS),
+ KEY(5, 4, KEY_SPACE),
+ KEY(5, 5, KEY_COMMA),
+ KEY(5, 7, KEY_UP),
+ KEY(5, 11, CORGI_KEY_FN),
+ KEY(6, 0, KEY_SYSRQ),
+ KEY(6, 1, CORGI_KEY_JAP1),
+ KEY(6, 2, CORGI_KEY_JAP2),
+ KEY(6, 3, CORGI_KEY_CANCEL),
+ KEY(6, 4, CORGI_KEY_OK),
+ KEY(6, 5, CORGI_KEY_MENU),
+ KEY(6, 6, KEY_LEFT),
+ KEY(6, 7, KEY_DOWN),
+ KEY(6, 8, KEY_RIGHT),
+ KEY(7, 0, CORGI_KEY_OFF),
+ KEY(7, 1, CORGI_KEY_EXOK),
+ KEY(7, 2, CORGI_KEY_EXCANCEL),
+ KEY(7, 3, CORGI_KEY_EXJOGDOWN),
+ KEY(7, 4, CORGI_KEY_EXJOGUP),
+};
+
+static struct matrix_keymap_data corgikbd_keymap_data = {
+ .keymap = corgikbd_keymap,
+ .keymap_size = ARRAY_SIZE(corgikbd_keymap),
+};
+
+static const int corgikbd_row_gpios[] =
+ { 58, 59, 60, 61, 62, 63, 64, 65 };
+static const int corgikbd_col_gpios[] =
+ { 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
+
+static struct matrix_keypad_platform_data corgikbd_pdata = {
+ .keymap_data = &corgikbd_keymap_data,
+ .row_gpios = corgikbd_row_gpios,
+ .col_gpios = corgikbd_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(corgikbd_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(corgikbd_col_gpios),
+ .col_scan_delay_us = 10,
+ .debounce_ms = 10,
+ .wakeup = 1,
+};
+
static struct platform_device corgikbd_device = {
- .name = "corgi-keyboard",
+ .name = "matrix-keypad",
.id = -1,
+ .dev = {
+ .platform_data = &corgikbd_pdata,
+ },
};
/*
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
-static struct pxamci_platform_data corgi_mci_platform_data;
-
-static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
-{
- int err;
-
- err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
- if (err)
- goto err_out;
-
- err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
- if (err)
- goto err_free_1;
-
- err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
- if (err)
- goto err_free_2;
-
- gpio_direction_input(CORGI_GPIO_nSD_DETECT);
- gpio_direction_input(CORGI_GPIO_nSD_WP);
- gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
-
- corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
- __func__);
- goto err_free_3;
- }
- return 0;
-
-err_free_3:
- gpio_free(CORGI_GPIO_SD_PWR);
-err_free_2:
- gpio_free(CORGI_GPIO_nSD_WP);
-err_free_1:
- gpio_free(CORGI_GPIO_nSD_DETECT);
-err_out:
- return err;
-}
-
-static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data* p_d = dev->platform_data;
-
- gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
-}
-
-static int corgi_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(CORGI_GPIO_nSD_WP);
-}
-
-static void corgi_mci_exit(struct device *dev, void *data)
-{
- free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
- gpio_free(CORGI_GPIO_SD_PWR);
- gpio_free(CORGI_GPIO_nSD_WP);
- gpio_free(CORGI_GPIO_nSD_DETECT);
-}
-
static struct pxamci_platform_data corgi_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = corgi_mci_init,
- .get_ro = corgi_mci_get_ro,
- .setpower = corgi_mci_setpower,
- .exit = corgi_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = CORGI_GPIO_nSD_WP,
+ .gpio_power = CORGI_GPIO_SD_PWR,
};
/*
* Irda
*/
-static void corgi_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int corgi_irda_startup(struct device *dev)
-{
- int err;
-
- err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
- if (err)
- return err;
-
- gpio_direction_output(CORGI_GPIO_IR_ON, 1);
- return 0;
-}
-
-static void corgi_irda_shutdown(struct device *dev)
-{
- gpio_free(CORGI_GPIO_IR_ON);
-}
-
static struct pxaficp_platform_data corgi_ficp_platform_data = {
+ .gpio_pwdown = CORGI_GPIO_IR_ON,
.transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = corgi_irda_transceiver_mode,
- .startup = corgi_irda_startup,
- .shutdown = corgi_irda_shutdown,
};
corgi_init_spi();
pxa_set_udc_info(&udc_info);
+ corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
pxa_set_i2c_info(NULL);
static pxa_freqs_t pxa27x_freqs[] = {
{104000, 104000, PXA27x_CCCR(1, 8, 2), 0, CCLKCFG2(1, 0, 1), 900000, 1705000 },
- {156000, 104000, PXA27x_CCCR(1, 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+ {156000, 104000, PXA27x_CCCR(1, 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },
static int csb726_mci_init(struct device *dev,
irq_handler_t detect, void *data)
{
- int err;
-
csb726_mci_data.detect_delay = msecs_to_jiffies(500);
-
- err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
- if (err)
- goto err_det_req;
-
- err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
- if (err)
- goto err_det_dir;
-
- err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
- if (err)
- goto err_ro_req;
-
- err = gpio_direction_input(CSB726_GPIO_MMC_RO);
- if (err)
- goto err_ro_dir;
-
- err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
- IRQF_DISABLED, "MMC card detect", data);
- if (err)
- goto err_irq;
-
return 0;
-
-err_irq:
-err_ro_dir:
- gpio_free(CSB726_GPIO_MMC_RO);
-err_ro_req:
-err_det_dir:
- gpio_free(CSB726_GPIO_MMC_DETECT);
-err_det_req:
- return err;
-}
-
-static int csb726_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(CSB726_GPIO_MMC_RO);
-}
-
-static void csb726_mci_exit(struct device *dev, void *data)
-{
- free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
- gpio_free(CSB726_GPIO_MMC_RO);
- gpio_free(CSB726_GPIO_MMC_DETECT);
}
static struct pxamci_platform_data csb726_mci = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = csb726_mci_init,
- .get_ro = csb726_mci_get_ro,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = csb726_mci_init,
/* FIXME setpower */
- .exit = csb726_mci_exit,
+ .gpio_card_detect = CSB726_GPIO_MMC_DETECT,
+ .gpio_card_ro = CSB726_GPIO_MMC_RO,
+ .gpio_power = -1,
};
static struct pxaohci_platform_data csb726_ohci_platform_data = {
};
struct smsc911x_platform_config csb726_lan_config = {
- .irq_type = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_32BIT,
.phy_interface = PHY_INTERFACE_MODE_MII,
{
pxa_register_device(&pxa3xx_device_nand, info);
}
+
+static struct resource pxa3xx_resources_gcu[] = {
+ {
+ .start = 0x54000000,
+ .end = 0x54000fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_GCU,
+ .end = IRQ_GCU,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+ .name = "pxa3xx-gcu",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
+ .resource = pxa3xx_resources_gcu,
+ .dev = {
+ .dma_mask = &pxa3xx_gcu_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
#endif /* CONFIG_PXA3xx */
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
extern struct platform_device pxa3xx_device_nand;
extern struct platform_device pxa3xx_device_i2c_power;
+extern struct platform_device pxa3xx_device_gcu;
+
void __init pxa_register_device(struct platform_device *dev, void *data);
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
- e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
pxa_set_ac97_info(NULL);
- e7xx_irda_init();
pxa_set_ficp_info(&e7xx_ficp_platform_data);
}
}
static struct pxamci_platform_data em_x270_mci_platform_data = {
- .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
- MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
- MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
- MMC_VDD_30_31|MMC_VDD_31_32,
- .init = em_x270_mci_init,
- .setpower = em_x270_mci_setpower,
- .exit = em_x270_mci_exit,
+ .ocr_mask = MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+ MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+ MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+ MMC_VDD_30_31|MMC_VDD_31_32,
+ .init = em_x270_mci_init,
+ .setpower = em_x270_mci_setpower,
+ .exit = em_x270_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init em_x270_init_mmc(void)
return 0;
}
-static struct soc_camera_link iclink = {
- .bus_id = 0,
- .power = em_x270_sensor_power,
-};
-
static struct i2c_board_info em_x270_i2c_cam_info[] = {
{
I2C_BOARD_INFO("mt9m111", 0x48),
+ },
+};
+
+static struct soc_camera_link iclink = {
+ .bus_id = 0,
+ .power = em_x270_sensor_power,
+ .board_info = &em_x270_i2c_cam_info[0],
+ .i2c_adapter_id = 0,
+ .module_name = "mt9m111",
+};
+
+static struct platform_device em_x270_camera = {
+ .name = "soc-camera-pdrv",
+ .id = -1,
+ .dev = {
.platform_data = &iclink,
},
};
static void __init em_x270_init_camera(void)
{
- i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
pxa_set_camera_info(&em_x270_camera_platform_data);
+ platform_device_register(&em_x270_camera);
}
#else
static inline void em_x270_init_camera(void) {}
REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
+REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
#define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask) \
static struct regulator_init_data _ldo##_data = { \
REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
struct led_info em_x270_led_info = {
.name = "em-x270:orange",
DA9030_LDO(12),
DA9030_LDO(19),
+ DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
+
DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
static void __init em_x270_module_init(void)
{
- pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
mmc_cd = GPIO13_MMC_CD;
static void __init em_x270_exeda_init(void)
{
- pr_info("%s\n", __func__);
pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
mmc_cd = GPIO114_MMC_CD;
.gpio_pullup_inverted = 1
};
-static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
-{
- if (mode & IR_OFF) {
- gpio_set_value(GPIO_E7XX_IR_OFF, 1);
- pxa2xx_transceiver_mode(dev, mode);
- } else {
- pxa2xx_transceiver_mode(dev, mode);
- gpio_set_value(GPIO_E7XX_IR_OFF, 0);
- }
-}
-
-int e7xx_irda_init(void)
-{
- int ret;
-
- ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
- if (ret)
- goto out;
-
- ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
- if (ret)
- goto out;
-
- e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
-out:
- return ret;
-}
-
-static void e7xx_irda_shutdown(struct device *dev)
-{
- e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
- gpio_free(GPIO_E7XX_IR_OFF);
-}
-
struct pxaficp_platform_data e7xx_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = e7xx_irda_transceiver_mode,
- .shutdown = e7xx_irda_shutdown,
+ .gpio_pwdown = GPIO_E7XX_IR_OFF,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
int eseries_tmio_enable(struct platform_device *dev)
#ifdef CONFIG_MMC_PXA
static struct pxamci_platform_data gumstix_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init gumstix_mmc_init(void)
#include <mach/irda.h>
#include <mach/pxa2xx_spi.h>
+#include <video/platform_lcd.h>
#include <video/w100fb.h>
#include "devices.h"
* IRDA
*/
-static void irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
-}
-
static struct pxaficp_platform_data ficp_info = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = irda_transceiver_mode,
+ .gpio_pwdown = GPIO105_HX4700_nIR_ON,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/*
* LCD - Sony display connected to ATI Imageon w3220
*/
-static int lcd_power;
-
static void sony_lcd_init(void)
{
gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
}
-static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
-{
- switch (level) {
- case FB_BLANK_UNBLANK:
- sony_lcd_init();
- break;
- case FB_BLANK_NORMAL:
- case FB_BLANK_VSYNC_SUSPEND:
- case FB_BLANK_HSYNC_SUSPEND:
- case FB_BLANK_POWERDOWN:
- sony_lcd_off();
- break;
- }
- lcd_power = level;
- return 0;
-}
-
-static int hx4700_lcd_get_power(struct lcd_device *lm)
-{
- return lcd_power;
-}
-
-static struct lcd_ops hx4700_lcd_ops = {
- .get_power = hx4700_lcd_get_power,
- .set_power = hx4700_lcd_set_power,
-};
-
-static struct lcd_device *hx4700_lcd_device;
-
#ifdef CONFIG_PM
static void w3220_lcd_suspend(struct w100fb_par *wfb)
{
.resource = w3220_resources,
};
+static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+ if (power)
+ sony_lcd_init();
+ else
+ sony_lcd_off();
+}
+
+static struct plat_lcd_data hx4700_lcd_data = {
+ .set_power = hx4700_lcd_set_power,
+};
+
+static struct platform_device hx4700_lcd = {
+ .name = "platform-lcd",
+ .id = -1,
+ .dev = {
+ .platform_data = &hx4700_lcd_data,
+ .parent = &w3220.dev,
+ },
+};
+
/*
* Backlight
*/
pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
- hx4700_lcd_device = lcd_device_register("w100fb", NULL,
- (void *)&w3220_info, &hx4700_lcd_ops);
-
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
mdelay(10);
gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
};
static struct pxamci_platform_data idp_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init idp_init(void)
static struct pxamci_platform_data imote2_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
.get_ro = imote2_mci_get_ro,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static struct mtd_partition imote2flash_partitions[] = {
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/balloon3.h
+ *
+ * Authors: Nick Bane and Wookey
+ * Created: Oct, 2005
+ * Copyright: Toby Churchill Ltd
+ * Cribbed from mainstone.c, by Nicholas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_BALLOON3_H
+#define ASM_ARCH_BALLOON3_H
+
+enum balloon3_features {
+ BALLOON3_FEATURE_OHCI,
+ BALLOON3_FEATURE_MMC,
+ BALLOON3_FEATURE_CF,
+ BALLOON3_FEATURE_AUDIO,
+ BALLOON3_FEATURE_TOPPOLY,
+};
+
+#define BALLOON3_FPGA_PHYS PXA_CS4_PHYS
+#define BALLOON3_FPGA_VIRT (0xf1000000) /* as per balloon2 */
+#define BALLOON3_FPGA_LENGTH 0x01000000
+
+/* FPGA/CPLD registers */
+#define BALLOON3_PCMCIA0_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+/* fixme - same for now */
+#define BALLOON3_PCMCIA1_REG (BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_NANDIO_IO_REG (BALLOON3_FPGA_VIRT + 0x00e00000)
+/* fpga/cpld interrupt control register */
+#define BALLOON3_INT_CONTROL_REG (BALLOON3_FPGA_VIRT + 0x00e0000C)
+#define BALLOON3_NANDIO_CTL2_REG (BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NANDIO_CTL_REG (BALLOON3_FPGA_VIRT + 0x00e00014)
+#define BALLOON3_VERSION_REG (BALLOON3_FPGA_VIRT + 0x00e0001c)
+
+#define BALLOON3_SAMOSA_ADDR_REG (BALLOON3_FPGA_VIRT + 0x00c00000)
+#define BALLOON3_SAMOSA_DATA_REG (BALLOON3_FPGA_VIRT + 0x00c00004)
+#define BALLOON3_SAMOSA_STATUS_REG (BALLOON3_FPGA_VIRT + 0x00c0001c)
+
+/* GPIOs for irqs */
+#define BALLOON3_GPIO_AUX_NIRQ (94)
+#define BALLOON3_GPIO_CODEC_IRQ (95)
+
+/* Timer and Idle LED locations */
+#define BALLOON3_GPIO_LED_NAND (9)
+#define BALLOON3_GPIO_LED_IDLE (10)
+
+/* backlight control */
+#define BALLOON3_GPIO_RUN_BACKLIGHT (99)
+
+#define BALLOON3_GPIO_S0_CD (105)
+
+/* FPGA Interrupt Mask/Acknowledge Register */
+#define BALLOON3_INT_S0_IRQ (1 << 0) /* PCMCIA 0 IRQ */
+#define BALLOON3_INT_S0_STSCHG (1 << 1) /* PCMCIA 0 status changed */
+
+/* CF Status Register */
+#define BALLOON3_PCMCIA_nIRQ (1 << 0) /* IRQ / ready signal */
+#define BALLOON3_PCMCIA_nSTSCHG_BVD1 (1 << 1)
+ /* VDD sense / card status changed */
+
+/* CF control register (write) */
+#define BALLOON3_PCMCIA_RESET (1 << 0) /* Card reset signal */
+#define BALLOON3_PCMCIA_ENABLE (1 << 1)
+#define BALLOON3_PCMCIA_ADD_ENABLE (1 << 2)
+
+/* CPLD (and FPGA) interface definitions */
+#define CPLD_LCD0_DATA_SET 0x00
+#define CPLD_LCD0_DATA_CLR 0x10
+#define CPLD_LCD0_COMMAND_SET 0x01
+#define CPLD_LCD0_COMMAND_CLR 0x11
+#define CPLD_LCD1_DATA_SET 0x02
+#define CPLD_LCD1_DATA_CLR 0x12
+#define CPLD_LCD1_COMMAND_SET 0x03
+#define CPLD_LCD1_COMMAND_CLR 0x13
+
+#define CPLD_MISC_SET 0x07
+#define CPLD_MISC_CLR 0x17
+#define CPLD_MISC_LOON_NRESET_BIT 0
+#define CPLD_MISC_LOON_UNSUSP_BIT 1
+#define CPLD_MISC_RUN_5V_BIT 2
+#define CPLD_MISC_CHG_D0_BIT 3
+#define CPLD_MISC_CHG_D1_BIT 4
+#define CPLD_MISC_DAC_NCS_BIT 5
+
+#define CPLD_LCD_SET 0x08
+#define CPLD_LCD_CLR 0x18
+#define CPLD_LCD_BACKLIGHT_EN_0_BIT 0
+#define CPLD_LCD_BACKLIGHT_EN_1_BIT 1
+#define CPLD_LCD_LED_RED_BIT 4
+#define CPLD_LCD_LED_GREEN_BIT 5
+#define CPLD_LCD_NRESET_BIT 7
+
+#define CPLD_LCD_RO_SET 0x09
+#define CPLD_LCD_RO_CLR 0x19
+#define CPLD_LCD_RO_LCD0_nWAIT_BIT 0
+#define CPLD_LCD_RO_LCD1_nWAIT_BIT 1
+
+#define CPLD_SERIAL_SET 0x0a
+#define CPLD_SERIAL_CLR 0x1a
+#define CPLD_SERIAL_GSM_RI_BIT 0
+#define CPLD_SERIAL_GSM_CTS_BIT 1
+#define CPLD_SERIAL_GSM_DTR_BIT 2
+#define CPLD_SERIAL_LPR_CTS_BIT 3
+#define CPLD_SERIAL_TC232_CTS_BIT 4
+#define CPLD_SERIAL_TC232_DSR_BIT 5
+
+#define CPLD_SROUTING_SET 0x0b
+#define CPLD_SROUTING_CLR 0x1b
+#define CPLD_SROUTING_MSP430_LPR 0
+#define CPLD_SROUTING_MSP430_TC232 1
+#define CPLD_SROUTING_MSP430_GSM 2
+#define CPLD_SROUTING_LOON_LPR (0 << 4)
+#define CPLD_SROUTING_LOON_TC232 (1 << 4)
+#define CPLD_SROUTING_LOON_GSM (2 << 4)
+
+#define CPLD_AROUTING_SET 0x0c
+#define CPLD_AROUTING_CLR 0x1c
+#define CPLD_AROUTING_MIC2PHONE_BIT 0
+#define CPLD_AROUTING_PHONE2INT_BIT 1
+#define CPLD_AROUTING_PHONE2EXT_BIT 2
+#define CPLD_AROUTING_LOONL2INT_BIT 3
+#define CPLD_AROUTING_LOONL2EXT_BIT 4
+#define CPLD_AROUTING_LOONR2PHONE_BIT 5
+#define CPLD_AROUTING_LOONR2INT_BIT 6
+#define CPLD_AROUTING_LOONR2EXT_BIT 7
+
+extern int balloon3_has(enum balloon3_features feature);
+
+#endif
extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
#endif
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+extern void colibri_pxa3xx_init_nand(void);
+#else
+static inline void colibri_pxa3xx_init_nand(void) {}
+#endif
+
/* physical memory regions */
#define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */
mov \tmp, \tmp, lsr #13
and \tmp, \tmp, #0x7 @ Core G
cmp \tmp, #1
- bhi 1004f
+ bhi 1002f
+ @ Core Generation 1 (PXA25x)
mov \base, #io_p2v(0x40000000) @ IIR Ctl = 0x40d00000
add \base, \base, #0x00d00000
ldr \irqstat, [\base, #0] @ ICIP
ldr \irqnr, [\base, #4] @ ICMR
- b 1002f
-1004:
- mrc p6, 0, \irqstat, c6, c0, 0 @ ICIP2
- mrc p6, 0, \irqnr, c7, c0, 0 @ ICMR2
ands \irqnr, \irqstat, \irqnr
- beq 1003f
+ beq 1001f
rsb \irqstat, \irqnr, #0
and \irqstat, \irqstat, \irqnr
clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #31
- add \irqnr, \irqnr, #(32 + PXA_IRQ(0))
+ rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
b 1001f
-1003:
- mrc p6, 0, \irqstat, c0, c0, 0 @ ICIP
- mrc p6, 0, \irqnr, c1, c0, 0 @ ICMR
1002:
- ands \irqnr, \irqstat, \irqnr
+ @ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
+ mrc p6, 0, \irqstat, c5, c0, 0 @ ICHP
+ tst \irqstat, #0x80000000
beq 1001f
- rsb \irqstat, \irqnr, #0
- and \irqstat, \irqstat, \irqnr
- clz \irqnr, \irqstat
- rsb \irqnr, \irqnr, #(31 + PXA_IRQ(0))
+ bic \irqstat, \irqstat, #0x80000000
+ mov \irqnr, \irqstat, lsr #16
1001:
.endm
#define __cpu_is_pxa935(id) (0)
#endif
+#ifdef CONFIG_CPU_PXA950
+#define __cpu_is_pxa950(id) \
+ ({ \
+ unsigned int _id = (id) >> 4 & 0xfff; \
+ id == 0x697; \
+ })
+#else
+#define __cpu_is_pxa950(id) (0)
+#endif
+
#define cpu_is_pxa210() \
({ \
__cpu_is_pxa210(read_cpuid_id()); \
__cpu_is_pxa935(id); \
})
+#define cpu_is_pxa950() \
+ ({ \
+ unsigned int id = read_cpuid(CPUID_ID); \
+ __cpu_is_pxa950(id); \
+ })
+
+
/*
* CPUID Core Generation Bit
* <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
void (*transceiver_mode)(struct device *dev, int mode);
int (*startup)(struct device *dev);
void (*shutdown)(struct device *dev);
+ int gpio_pwdown; /* powerdown GPIO for the IrDA chip */
+ bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */
};
extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
#ifdef CONFIG_PXA3xx
#define IRQ_SSP4 PXA_IRQ(13) /* SSP4 service request */
#define IRQ_CIR PXA_IRQ(34) /* Consumer IR */
+#define IRQ_COMM_WDT PXA_IRQ(35) /* Comm WDT interrupt */
#define IRQ_TSI PXA_IRQ(36) /* Touch Screen Interface (PXA320) */
#define IRQ_USIM2 PXA_IRQ(38) /* USIM2 Controller */
-#define IRQ_GRPHICS PXA_IRQ(39) /* Graphics Controller */
+#define IRQ_GCU PXA_IRQ(39) /* Graphics Controller */
#define IRQ_MMC2 PXA_IRQ(41) /* MMC2 Controller */
#define IRQ_1WIRE PXA_IRQ(44) /* 1-Wire Controller */
#define IRQ_NAND PXA_IRQ(45) /* NAND Controller */
#define IRQ_MMC3 PXA_IRQ(55) /* MMC3 Controller (PXA310) */
#endif
-#define PXA_GPIO_IRQ_BASE PXA_IRQ(64)
-#define PXA_GPIO_IRQ_NUM (128)
+#ifdef CONFIG_CPU_PXA935
+#define IRQ_U2O PXA_IRQ(64) /* USB OTG 2.0 Controller (PXA935) */
+#define IRQ_U2H PXA_IRQ(65) /* USB Host 2.0 Controller (PXA935) */
+
+#define IRQ_MMC3_PXA935 PXA_IRQ(72) /* MMC3 Controller (PXA935) */
+#define IRQ_MMC4_PXA935 PXA_IRQ(73) /* MMC4 Controller (PXA935) */
+#define IRQ_MMC5_PXA935 PXA_IRQ(74) /* MMC5 Controller (PXA935) */
+
+#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define IRQ_ENHROT PXA_IRQ(37) /* Enhanced Rotary (PXA930) */
+#define IRQ_ACIPC0 PXA_IRQ(5)
+#define IRQ_ACIPC1 PXA_IRQ(40)
+#define IRQ_ACIPC2 PXA_IRQ(19)
+#define IRQ_TRKBALL PXA_IRQ(43) /* Track Ball */
+#endif
+
+#ifdef CONFIG_CPU_PXA950
+#define IRQ_GC500 PXA_IRQ(70) /* Graphics Controller (PXA950) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
+#define PXA_GPIO_IRQ_NUM (192)
#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
#define IRQ_BOARD_END (IRQ_BOARD_START + 70)
#elif defined(CONFIG_MACH_ZYLONITE)
#define IRQ_BOARD_END (IRQ_BOARD_START + 32)
+#elif defined(CONFIG_PXA_EZX)
+#define IRQ_BOARD_END (IRQ_BOARD_START + 23)
#else
#define IRQ_BOARD_END (IRQ_BOARD_START + 16)
#endif
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
#define IRQ_LOCOMO_KEY_BASE (IRQ_BOARD_START + 0)
#define IRQ_LOCOMO_GPIO_BASE (IRQ_BOARD_START + 1)
#ifndef __ASM_ARCH_MFP_H
#define __ASM_ARCH_MFP_H
-#define mfp_to_gpio(m) ((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
- MFP_PIN_INVALID = -1,
-
- MFP_PIN_GPIO0 = 0,
- MFP_PIN_GPIO1,
- MFP_PIN_GPIO2,
- MFP_PIN_GPIO3,
- MFP_PIN_GPIO4,
- MFP_PIN_GPIO5,
- MFP_PIN_GPIO6,
- MFP_PIN_GPIO7,
- MFP_PIN_GPIO8,
- MFP_PIN_GPIO9,
- MFP_PIN_GPIO10,
- MFP_PIN_GPIO11,
- MFP_PIN_GPIO12,
- MFP_PIN_GPIO13,
- MFP_PIN_GPIO14,
- MFP_PIN_GPIO15,
- MFP_PIN_GPIO16,
- MFP_PIN_GPIO17,
- MFP_PIN_GPIO18,
- MFP_PIN_GPIO19,
- MFP_PIN_GPIO20,
- MFP_PIN_GPIO21,
- MFP_PIN_GPIO22,
- MFP_PIN_GPIO23,
- MFP_PIN_GPIO24,
- MFP_PIN_GPIO25,
- MFP_PIN_GPIO26,
- MFP_PIN_GPIO27,
- MFP_PIN_GPIO28,
- MFP_PIN_GPIO29,
- MFP_PIN_GPIO30,
- MFP_PIN_GPIO31,
- MFP_PIN_GPIO32,
- MFP_PIN_GPIO33,
- MFP_PIN_GPIO34,
- MFP_PIN_GPIO35,
- MFP_PIN_GPIO36,
- MFP_PIN_GPIO37,
- MFP_PIN_GPIO38,
- MFP_PIN_GPIO39,
- MFP_PIN_GPIO40,
- MFP_PIN_GPIO41,
- MFP_PIN_GPIO42,
- MFP_PIN_GPIO43,
- MFP_PIN_GPIO44,
- MFP_PIN_GPIO45,
- MFP_PIN_GPIO46,
- MFP_PIN_GPIO47,
- MFP_PIN_GPIO48,
- MFP_PIN_GPIO49,
- MFP_PIN_GPIO50,
- MFP_PIN_GPIO51,
- MFP_PIN_GPIO52,
- MFP_PIN_GPIO53,
- MFP_PIN_GPIO54,
- MFP_PIN_GPIO55,
- MFP_PIN_GPIO56,
- MFP_PIN_GPIO57,
- MFP_PIN_GPIO58,
- MFP_PIN_GPIO59,
- MFP_PIN_GPIO60,
- MFP_PIN_GPIO61,
- MFP_PIN_GPIO62,
- MFP_PIN_GPIO63,
- MFP_PIN_GPIO64,
- MFP_PIN_GPIO65,
- MFP_PIN_GPIO66,
- MFP_PIN_GPIO67,
- MFP_PIN_GPIO68,
- MFP_PIN_GPIO69,
- MFP_PIN_GPIO70,
- MFP_PIN_GPIO71,
- MFP_PIN_GPIO72,
- MFP_PIN_GPIO73,
- MFP_PIN_GPIO74,
- MFP_PIN_GPIO75,
- MFP_PIN_GPIO76,
- MFP_PIN_GPIO77,
- MFP_PIN_GPIO78,
- MFP_PIN_GPIO79,
- MFP_PIN_GPIO80,
- MFP_PIN_GPIO81,
- MFP_PIN_GPIO82,
- MFP_PIN_GPIO83,
- MFP_PIN_GPIO84,
- MFP_PIN_GPIO85,
- MFP_PIN_GPIO86,
- MFP_PIN_GPIO87,
- MFP_PIN_GPIO88,
- MFP_PIN_GPIO89,
- MFP_PIN_GPIO90,
- MFP_PIN_GPIO91,
- MFP_PIN_GPIO92,
- MFP_PIN_GPIO93,
- MFP_PIN_GPIO94,
- MFP_PIN_GPIO95,
- MFP_PIN_GPIO96,
- MFP_PIN_GPIO97,
- MFP_PIN_GPIO98,
- MFP_PIN_GPIO99,
- MFP_PIN_GPIO100,
- MFP_PIN_GPIO101,
- MFP_PIN_GPIO102,
- MFP_PIN_GPIO103,
- MFP_PIN_GPIO104,
- MFP_PIN_GPIO105,
- MFP_PIN_GPIO106,
- MFP_PIN_GPIO107,
- MFP_PIN_GPIO108,
- MFP_PIN_GPIO109,
- MFP_PIN_GPIO110,
- MFP_PIN_GPIO111,
- MFP_PIN_GPIO112,
- MFP_PIN_GPIO113,
- MFP_PIN_GPIO114,
- MFP_PIN_GPIO115,
- MFP_PIN_GPIO116,
- MFP_PIN_GPIO117,
- MFP_PIN_GPIO118,
- MFP_PIN_GPIO119,
- MFP_PIN_GPIO120,
- MFP_PIN_GPIO121,
- MFP_PIN_GPIO122,
- MFP_PIN_GPIO123,
- MFP_PIN_GPIO124,
- MFP_PIN_GPIO125,
- MFP_PIN_GPIO126,
- MFP_PIN_GPIO127,
- MFP_PIN_GPIO0_2,
- MFP_PIN_GPIO1_2,
- MFP_PIN_GPIO2_2,
- MFP_PIN_GPIO3_2,
- MFP_PIN_GPIO4_2,
- MFP_PIN_GPIO5_2,
- MFP_PIN_GPIO6_2,
- MFP_PIN_GPIO7_2,
- MFP_PIN_GPIO8_2,
- MFP_PIN_GPIO9_2,
- MFP_PIN_GPIO10_2,
- MFP_PIN_GPIO11_2,
- MFP_PIN_GPIO12_2,
- MFP_PIN_GPIO13_2,
- MFP_PIN_GPIO14_2,
- MFP_PIN_GPIO15_2,
- MFP_PIN_GPIO16_2,
- MFP_PIN_GPIO17_2,
-
- MFP_PIN_ULPI_STP,
- MFP_PIN_ULPI_NXT,
- MFP_PIN_ULPI_DIR,
-
- MFP_PIN_nXCVREN,
- MFP_PIN_DF_CLE_nOE,
- MFP_PIN_DF_nADV1_ALE,
- MFP_PIN_DF_SCLK_E,
- MFP_PIN_DF_SCLK_S,
- MFP_PIN_nBE0,
- MFP_PIN_nBE1,
- MFP_PIN_DF_nADV2_ALE,
- MFP_PIN_DF_INT_RnB,
- MFP_PIN_DF_nCS0,
- MFP_PIN_DF_nCS1,
- MFP_PIN_nLUA,
- MFP_PIN_nLLA,
- MFP_PIN_DF_nWE,
- MFP_PIN_DF_ALE_nWE,
- MFP_PIN_DF_nRE_nOE,
- MFP_PIN_DF_ADDR0,
- MFP_PIN_DF_ADDR1,
- MFP_PIN_DF_ADDR2,
- MFP_PIN_DF_ADDR3,
- MFP_PIN_DF_IO0,
- MFP_PIN_DF_IO1,
- MFP_PIN_DF_IO2,
- MFP_PIN_DF_IO3,
- MFP_PIN_DF_IO4,
- MFP_PIN_DF_IO5,
- MFP_PIN_DF_IO6,
- MFP_PIN_DF_IO7,
- MFP_PIN_DF_IO8,
- MFP_PIN_DF_IO9,
- MFP_PIN_DF_IO10,
- MFP_PIN_DF_IO11,
- MFP_PIN_DF_IO12,
- MFP_PIN_DF_IO13,
- MFP_PIN_DF_IO14,
- MFP_PIN_DF_IO15,
-
- /* additional pins on PXA930 */
- MFP_PIN_GSIM_UIO,
- MFP_PIN_GSIM_UCLK,
- MFP_PIN_GSIM_UDET,
- MFP_PIN_GSIM_nURST,
- MFP_PIN_PMIC_INT,
- MFP_PIN_RDY,
-
- MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit 0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * alternate function = 0,
- * drive strength = fast 3mA (MFP_DS03X)
- * low power mode = default
- * edge detection = none
- *
- * MFP_CFG - default MFPR value with alternate function
- * MFP_CFG_DRV - default MFPR value with alternate function and
- * pin drive strength
- * MFP_CFG_LPM - default MFPR value with alternate function and
- * low power mode
- * MFP_CFG_X - default MFPR value with alternate function,
- * pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x) ((x) & 0x3ff)
-
-#define MFP_AF0 (0x0 << 10)
-#define MFP_AF1 (0x1 << 10)
-#define MFP_AF2 (0x2 << 10)
-#define MFP_AF3 (0x3 << 10)
-#define MFP_AF4 (0x4 << 10)
-#define MFP_AF5 (0x5 << 10)
-#define MFP_AF6 (0x6 << 10)
-#define MFP_AF7 (0x7 << 10)
-#define MFP_AF_MASK (0x7 << 10)
-#define MFP_AF(x) (((x) >> 10) & 0x7)
-
-#define MFP_DS01X (0x0 << 13)
-#define MFP_DS02X (0x1 << 13)
-#define MFP_DS03X (0x2 << 13)
-#define MFP_DS04X (0x3 << 13)
-#define MFP_DS06X (0x4 << 13)
-#define MFP_DS08X (0x5 << 13)
-#define MFP_DS10X (0x6 << 13)
-#define MFP_DS13X (0x7 << 13)
-#define MFP_DS_MASK (0x7 << 13)
-#define MFP_DS(x) (((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT (0x0 << 16)
-#define MFP_LPM_DRIVE_LOW (0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH (0x2 << 16)
-#define MFP_LPM_PULL_LOW (0x3 << 16)
-#define MFP_LPM_PULL_HIGH (0x4 << 16)
-#define MFP_LPM_FLOAT (0x5 << 16)
-#define MFP_LPM_INPUT (0x6 << 16)
-#define MFP_LPM_STATE_MASK (0x7 << 16)
-#define MFP_LPM_STATE(x) (((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE (0x0 << 19)
-#define MFP_LPM_EDGE_RISE (0x1 << 19)
-#define MFP_LPM_EDGE_FALL (0x2 << 19)
-#define MFP_LPM_EDGE_BOTH (0x3 << 19)
-#define MFP_LPM_EDGE_MASK (0x3 << 19)
-#define MFP_LPM_EDGE(x) (((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE (0x0 << 21)
-#define MFP_PULL_LOW (0x1 << 21)
-#define MFP_PULL_HIGH (0x2 << 21)
-#define MFP_PULL_BOTH (0x3 << 21)
-#define MFP_PULL_MASK (0x3 << 21)
-#define MFP_PULL(x) (((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
- MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af) \
- ((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm) \
- ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
- (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+#include <plat/mfp.h>
#endif /* __ASM_ARCH_MFP_H */
int (*get_ro)(struct device *);
void (*setpower)(struct device *, unsigned int);
void (*exit)(struct device *, void *);
+ int gpio_card_detect; /* gpio detecting card insertion */
+ int gpio_card_ro; /* gpio detecting read only toggle */
+ bool gpio_card_ro_invert; /* gpio ro is inverted */
+ int gpio_power; /* gpio powering up MMC bus */
+ bool gpio_power_invert; /* gpio power is inverted */
};
extern void pxa_set_mci_info(struct pxamci_platform_data *info);
--- /dev/null
+/*
+ * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
+ *
+ * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
+ *
+ * Authors: Alex Osborne <bobofdoom@gmail.com>
+ * Marek Vasut <marek.vasut@gmail.com>
+ * Holger Bocklet <bitz.email@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTC_H_
+#define _INCLUDE_PALMTC_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTC_EARPHONE_DETECT 2
+#define GPIO_NR_PALMTC_CRADLE_DETECT 5
+#define GPIO_NR_PALMTC_HOTSYNC_BUTTON 7
+
+/* SD/MMC */
+#define GPIO_NR_PALMTC_SD_DETECT_N 12
+#define GPIO_NR_PALMTC_SD_POWER 32
+#define GPIO_NR_PALMTC_SD_READONLY 54
+
+/* WLAN */
+#define GPIO_NR_PALMTC_PCMCIA_READY 13
+#define GPIO_NR_PALMTC_PCMCIA_PWRREADY 14
+#define GPIO_NR_PALMTC_PCMCIA_POWER1 15
+#define GPIO_NR_PALMTC_PCMCIA_POWER2 33
+#define GPIO_NR_PALMTC_PCMCIA_POWER3 55
+#define GPIO_NR_PALMTC_PCMCIA_RESET 78
+
+/* UDC */
+#define GPIO_NR_PALMTC_USB_DETECT_N 4
+#define GPIO_NR_PALMTC_USB_POWER 36
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTC_BL_POWER 16
+#define GPIO_NR_PALMTC_LCD_POWER 44
+#define GPIO_NR_PALMTC_LCD_BLANK 38
+
+/* UART */
+#define GPIO_NR_PALMTC_RS232_POWER 37
+
+/* IRDA */
+#define GPIO_NR_PALMTC_IR_DISABLE 45
+
+/* IRQs */
+#define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+
+/* UCB1400 GPIOs */
+#define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00)
+#define GPIO_NR_PALMTC_HEADPHONE_DETECT (0x80 | 0x01)
+#define GPIO_NR_PALMTC_SPEAKER_ENABLE (0x80 | 0x03)
+#define GPIO_NR_PALMTC_VIBRA_POWER (0x80 | 0x05)
+#define GPIO_NR_PALMTC_LED_POWER (0x80 | 0x07)
+
+/** HERE ARE INIT VALUES **/
+#define PALMTC_UCB1400_GPIO_OFFSET 0x80
+
+/* BATTERY */
+#define PALMTC_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */
+#define PALMTC_BAT_MIN_VOLTAGE 3550 /* 3.55V critical voltage */
+#define PALMTC_BAT_MAX_CURRENT 0 /* unknokn */
+#define PALMTC_BAT_MIN_CURRENT 0 /* unknown */
+#define PALMTC_BAT_MAX_CHARGE 1 /* unknown */
+#define PALMTC_BAT_MIN_CHARGE 1 /* unknown */
+#define PALMTC_MAX_LIFE_MINS 240 /* on-life in minutes */
+
+#define PALMTC_BAT_MEASURE_DELAY (HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTC_MAX_INTENSITY 0xFE
+#define PALMTC_DEFAULT_INTENSITY 0x7E
+#define PALMTC_LIMIT_MASK 0x7F
+#define PALMTC_PRESCALER 0x3F
+#define PALMTC_PERIOD_NS 3500
+
+#endif
#define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */
#define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */
+#define PALMTX_NAND_ALE_PHYS (PALMTX_PHYS_NAND_START | (1 << 24))
+#define PALMTX_NAND_CLE_PHYS (PALMTX_PHYS_NAND_START | (1 << 25))
+#define PALMTX_NAND_ALE_VIRT 0xff100000
+#define PALMTX_NAND_CLE_VIRT 0xff200000
+
/* TOUCHSCREEN */
#define AC97_LINK_FRAME 21
#define CKEN_MVED 43 /* < MVED clock enable */
/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS 42 /* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS 7 /* Graphics controller clock enable */
+#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */
+#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */
#endif /* __ASM_ARCH_PXA3XX_REGS_H */
u_int fixed_modes:1,
cmap_inverse:1,
cmap_static:1,
- unused:29;
+ acceleration_enabled:1,
+ unused:28;
/* The following should be defined in LCCR0
* LCCR0_Act or LCCR0_Pas Active or Passive
#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */
#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */
#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */
+#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */
#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */
#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */
#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */
#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */
+#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */
+#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */
+#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */
+#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */
+#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */
+
+#define IPR(x) __REG(0x40D0001C + (x < 32 ? (x << 2) \
+ : (x < 64 ? (0x94 + ((x - 32) << 2)) \
+ : (0x128 + ((x - 64) << 2)))))
+
#endif /* __ASM_MACH_REGS_INTC_H */
{
if (machine_is_littleton() || machine_is_intelmote2()
|| machine_is_csb726() || machine_is_stargate2()
- || machine_is_cm_x300())
+ || machine_is_cm_x300() || machine_is_balloon3())
UART = STUART;
}
void __init pxa_init_irq(int irq_nr, set_wake_t fn)
{
- int irq;
+ int irq, i;
pxa_internal_irq_nr = irq_nr;
_ICLR(irq) = 0; /* all IRQs are IRQ, not FIQ */
}
+ /* initialize interrupt priority */
+ if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+ for (i = 0; i < irq_nr; i++)
+ IPR(i) = i | (1 << 31);
+ }
+
/* only unmasked interrupts kick us out of idle */
ICCR = 1;
#endif
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int littleton_mci_init(struct device *dev,
- irq_handler_t littleton_detect_int, void *data)
-{
- int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
-
- err = gpio_request(gpio_cd, "mmc card detect");
- if (err)
- goto err_request_cd;
-
- gpio_direction_input(gpio_cd);
-
- err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "mmc card detect", data);
- if (err) {
- dev_err(dev, "failed to request card detect IRQ\n");
- goto err_request_irq;
- }
- return 0;
-
-err_request_irq:
- gpio_free(gpio_cd);
-err_request_cd:
- return err;
-}
-
-static void littleton_mci_exit(struct device *dev, void *data)
-{
- int gpio_cd = GPIO_MMC1_CARD_DETECT;
-
- free_irq(gpio_to_irq(gpio_cd), data);
- gpio_free(gpio_cd);
-}
-
static struct pxamci_platform_data littleton_mci_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = littleton_mci_init,
- .exit = littleton_mci_exit,
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_MMC1_CARD_DETECT,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void __init littleton_init_mmc(void)
}
static struct pxamci_platform_data lubbock_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .detect_delay = 1,
- .init = lubbock_mci_init,
- .get_ro = lubbock_mci_get_ro,
- .exit = lubbock_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .detect_delay = 1,
+ .init = lubbock_mci_init,
+ .get_ro = lubbock_mci_get_ro,
+ .exit = lubbock_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
}
static struct pxaficp_platform_data lubbock_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
- .transceiver_mode = lubbock_irda_transceiver_mode,
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
+ .transceiver_mode = lubbock_irda_transceiver_mode,
};
static void __init lubbock_init(void)
* IRDA
*/
-static void magician_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data magician_ficp_info = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = magician_irda_transceiver_mode,
+ .gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/*
static int magician_mci_init(struct device *dev,
irq_handler_t detect_irq, void *data)
{
- int err;
-
- err = request_irq(IRQ_MAGICIAN_SD, detect_irq,
+ return request_irq(IRQ_MAGICIAN_SD, detect_irq,
IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
- "MMC card detect", data);
- if (err)
- goto err_request_irq;
- err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER");
- if (err)
- goto err_request_power;
- err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY");
- if (err)
- goto err_request_readonly;
-
- return 0;
-
-err_request_readonly:
- gpio_free(EGPIO_MAGICIAN_SD_POWER);
-err_request_power:
- free_irq(IRQ_MAGICIAN_SD, data);
-err_request_irq:
- return err;
-}
-
-static void magician_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *pdata = dev->platform_data;
-
- gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask);
-}
-
-static int magician_mci_get_ro(struct device *dev)
-{
- return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY));
+ "mmc card detect", data);
}
static void magician_mci_exit(struct device *dev, void *data)
{
- gpio_free(EGPIO_MAGICIAN_nSD_READONLY);
- gpio_free(EGPIO_MAGICIAN_SD_POWER);
free_irq(IRQ_MAGICIAN_SD, data);
}
static struct pxamci_platform_data magician_mci_info = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = magician_mci_init,
- .get_ro = magician_mci_get_ro,
- .setpower = magician_mci_setpower,
- .exit = magician_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = magician_mci_init,
+ .exit = magician_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
+ .gpio_card_ro_invert = 1,
+ .gpio_power = EGPIO_MAGICIAN_SD_POWER,
};
}
static struct pxamci_platform_data mainstone_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = mainstone_mci_init,
- .setpower = mainstone_mci_setpower,
- .exit = mainstone_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = mainstone_mci_init,
+ .setpower = mainstone_mci_setpower,
+ .exit = mainstone_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
}
static struct pxaficp_platform_data mainstone_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = mainstone_irda_transceiver_mode,
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = mainstone_irda_transceiver_mode,
};
static struct gpio_keys_button gpio_keys_button[] = {
/*
* SDIO/MMC Card controller
*/
-static void mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
-
- if ((1 << vdd) & p_d->ocr_mask)
- gpio_set_value(GPIO91_SDIO_EN, 1); /* enable SDIO power */
- else
- gpio_set_value(GPIO91_SDIO_EN, 0); /* disable SDIO power */
-}
-
-static int mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO78_SDIO_RO);
-}
-
-struct gpio_ress mci_gpios[] = {
- MIO_GPIO_IN(GPIO78_SDIO_RO, "SDIO readonly detect"),
- MIO_GPIO_IN(GPIO15_SDIO_INSERT, "SDIO insertion detect"),
- MIO_GPIO_OUT(GPIO91_SDIO_EN, 0, "SDIO power enable")
-};
-
-static void mci_exit(struct device *dev, void *data)
-{
- mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
- free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
-}
-
-static struct pxamci_platform_data mioa701_mci_info;
-
/**
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
-static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
-{
- int rc;
- int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
-
- rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
- if (rc)
- goto err_gpio;
- /* enable RE/FE interrupt on card insertion and removal */
- rc = request_irq(irq, detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (rc)
- goto err_irq;
-
- mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
- return 0;
-
-err_irq:
- dev_err(dev, "mioa701_mci_init: MMC/SD:"
- " can't request MMC card detect IRQ\n");
- mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-err_gpio:
- return rc;
-}
-
static struct pxamci_platform_data mioa701_mci_info = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = mci_init,
- .get_ro = mci_get_ro,
- .setpower = mci_setpower,
- .exit = mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO15_SDIO_INSERT,
+ .gpio_card_ro = GPIO78_SDIO_RO,
+ .gpio_power = GPIO91_SDIO_EN,
};
/* FlashRAM */
},
};
-static struct soc_camera_link iclink = {
- .bus_id = 0, /* Must match id in pxa27x_device_camera in device.c */
-};
-
/* Board I2C devices. */
static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
{
- /* Must initialize before the camera(s) */
I2C_BOARD_INFO("mt9m111", 0x5d),
- .platform_data = &iclink,
},
};
+static struct soc_camera_link iclink = {
+ .bus_id = 0, /* Match id in pxa27x_device_camera in device.c */
+ .board_info = &mioa701_i2c_devices[0],
+ .i2c_adapter_id = 0,
+ .module_name = "mt9m111",
+};
+
struct i2c_pxa_platform_data i2c_pdata = {
.fast_mode = 1,
};
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
+MIO_SIMPLE_DEV(mioa701_camera, "soc-camera-pdrv",&iclink);
static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
&power_dev,
&strataflash,
&gpio_vbus,
+ &mioa701_camera,
&mioa701_board,
};
static struct gpio_ress global_gpios[] = {
MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
- MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+ MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
};
static void __init mioa701_machine_init(void)
mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
bootstrap_init();
set_pxa_fb_info(&mioa701_pxafb_info);
+ mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&mioa701_mci_info);
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_i2c_info(&i2c_pdata);
pxa27x_set_i2c_power_info(NULL);
pxa_set_camera_info(&mioa701_pxacamera_platform_data);
- i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
}
static void mioa701_machine_exit(void)
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/sysdev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
};
/******************************************************************************
- * SD/MMC card controller
+ * NOR Flash
******************************************************************************/
-static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
- void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
- palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
+static struct mtd_partition palmld_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
}
+};
- err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_PALMLD_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmld_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMLD_SD_READONLY);
- gpio_free(GPIO_NR_PALMLD_SD_POWER);
- free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
- gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-}
+static struct physmap_flash_data palmld_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = palmld_partitions,
+ .nr_parts = ARRAY_SIZE(palmld_partitions)
+ }
+};
-static void palmld_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
+static struct resource palmld_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_4M - 1,
+ .flags = IORESOURCE_MEM,
+};
-static int palmld_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
-}
+static struct platform_device palmld_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &palmld_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = palmld_flash_data,
+ },
+};
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
static struct pxamci_platform_data palmld_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmld_mci_power,
- .get_ro = palmld_mci_get_ro,
- .init = palmld_mci_init,
- .exit = palmld_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMLD_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMLD_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMLD_SD_POWER,
+ .detect_delay = 20,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmld_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmld_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-}
-
-static void palmld_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmld_ficp_platform_data = {
- .startup = palmld_irda_startup,
- .shutdown = palmld_irda_shutdown,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = palmld_irda_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_PALMLD_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
&power_supply,
&palmld_asoc,
&palmld_hdd,
+ &palmld_flash,
};
static struct map_desc palmld_io_desc[] __initdata = {
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
-static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
- void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
- palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
- }
-
- err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_PALMT5_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmt5_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMT5_SD_READONLY);
- gpio_free(GPIO_NR_PALMT5_SD_POWER);
- free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
- gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-}
-
-static void palmt5_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmt5_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
-}
-
static struct pxamci_platform_data palmt5_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmt5_mci_power,
- .get_ro = palmt5_mci_get_ro,
- .init = palmt5_mci_init,
- .exit = palmt5_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMT5_SD_POWER,
+ .detect_delay = 20,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmt5_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmt5_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-}
-
-static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmt5_ficp_platform_data = {
- .startup = palmt5_irda_startup,
- .shutdown = palmt5_irda_shutdown,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = palmt5_irda_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_PALMT5_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
--- /dev/null
+/*
+ * linux/arch/arm/mach-pxa/palmtc.c
+ *
+ * Support for the Palm Tungsten|C
+ *
+ * Author: Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ * Petr Blaha <p3t3@centrum.cz>
+ * Chetan S. Kumar <shivakumar.chetan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/ucb1400.h>
+#include <linux/power_supply.h>
+#include <linux/gpio_keys.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtc.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtc_pin_config[] __initdata = {
+ /* MMC */
+ GPIO6_MMC_CLK,
+ GPIO8_MMC_CS0,
+ GPIO12_GPIO, /* detect */
+ GPIO32_GPIO, /* power */
+ GPIO54_GPIO, /* r/o switch */
+
+ /* PCMCIA */
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO50_nPIOR,
+ GPIO51_nPIOW,
+ GPIO49_nPWE,
+ GPIO48_nPOE,
+ GPIO52_nPCE_1,
+ GPIO53_nPCE_2,
+ GPIO57_nIOIS16,
+ GPIO56_nPWAIT,
+
+ /* AC97 */
+ GPIO28_AC97_BITCLK,
+ GPIO29_AC97_SDATA_IN_0,
+ GPIO30_AC97_SDATA_OUT,
+ GPIO31_AC97_SYNC,
+
+ /* IrDA */
+ GPIO45_GPIO, /* ir disable */
+ GPIO46_FICP_RXD,
+ GPIO47_FICP_TXD,
+
+ /* PWM */
+ GPIO17_PWM1_OUT,
+
+ /* USB */
+ GPIO4_GPIO, /* detect */
+ GPIO36_GPIO, /* pullup */
+
+ /* LCD */
+ GPIO58_LCD_LDD_0,
+ GPIO59_LCD_LDD_1,
+ GPIO60_LCD_LDD_2,
+ GPIO61_LCD_LDD_3,
+ GPIO62_LCD_LDD_4,
+ GPIO63_LCD_LDD_5,
+ GPIO64_LCD_LDD_6,
+ GPIO65_LCD_LDD_7,
+ GPIO66_LCD_LDD_8,
+ GPIO67_LCD_LDD_9,
+ GPIO68_LCD_LDD_10,
+ GPIO69_LCD_LDD_11,
+ GPIO70_LCD_LDD_12,
+ GPIO71_LCD_LDD_13,
+ GPIO72_LCD_LDD_14,
+ GPIO73_LCD_LDD_15,
+ GPIO74_LCD_FCLK,
+ GPIO75_LCD_LCLK,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS,
+
+ /* MATRIX KEYPAD */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 0 */
+ GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 1 */
+ GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 2 */
+ GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH, /* in 3 */
+ GPIO18_GPIO | MFP_LPM_DRIVE_LOW, /* out 0 */
+ GPIO19_GPIO | MFP_LPM_DRIVE_LOW, /* out 1 */
+ GPIO20_GPIO | MFP_LPM_DRIVE_LOW, /* out 2 */
+ GPIO21_GPIO | MFP_LPM_DRIVE_LOW, /* out 3 */
+ GPIO22_GPIO | MFP_LPM_DRIVE_LOW, /* out 4 */
+ GPIO23_GPIO | MFP_LPM_DRIVE_LOW, /* out 5 */
+ GPIO24_GPIO | MFP_LPM_DRIVE_LOW, /* out 6 */
+ GPIO25_GPIO | MFP_LPM_DRIVE_LOW, /* out 7 */
+ GPIO26_GPIO | MFP_LPM_DRIVE_LOW, /* out 8 */
+ GPIO27_GPIO | MFP_LPM_DRIVE_LOW, /* out 9 */
+ GPIO79_GPIO | MFP_LPM_DRIVE_LOW, /* out 10 */
+ GPIO80_GPIO | MFP_LPM_DRIVE_LOW, /* out 11 */
+
+ /* PXA GPIO KEYS */
+ GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH, /* hotsync button on cradle */
+
+ /* MISC */
+ GPIO1_RST, /* reset */
+ GPIO2_GPIO, /* earphone detect */
+ GPIO16_GPIO, /* backlight switch */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static struct pxamci_platform_data palmtc_mci_platform_data = {
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_power = GPIO_NR_PALMTC_SD_POWER,
+ .gpio_card_ro = GPIO_NR_PALMTC_SD_READONLY,
+ .gpio_card_detect = GPIO_NR_PALMTC_SD_DETECT_N,
+ .detect_delay = 20,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtc_pxa_buttons[] = {
+ {KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
+};
+
+static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
+ .buttons = palmtc_pxa_buttons,
+ .nbuttons = ARRAY_SIZE(palmtc_pxa_buttons),
+};
+
+static struct platform_device palmtc_pxa_keys = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_pxa_keys_data,
+ },
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtc_backlight_init(struct device *dev)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
+ if (ret)
+ goto err;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
+ if (ret)
+ goto err2;
+
+ return 0;
+
+err2:
+ gpio_free(GPIO_NR_PALMTC_BL_POWER);
+err:
+ return ret;
+}
+
+static int palmtc_backlight_notify(int brightness)
+{
+ /* backlight is on when GPIO16 AF0 is high */
+ gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
+ return brightness;
+}
+
+static void palmtc_backlight_exit(struct device *dev)
+{
+ gpio_free(GPIO_NR_PALMTC_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtc_backlight_data = {
+ .pwm_id = 1,
+ .max_brightness = PALMTC_MAX_INTENSITY,
+ .dft_brightness = PALMTC_MAX_INTENSITY,
+ .pwm_period_ns = PALMTC_PERIOD_NS,
+ .init = palmtc_backlight_init,
+ .notify = palmtc_backlight_notify,
+ .exit = palmtc_backlight_exit,
+};
+
+static struct platform_device palmtc_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &pxa25x_device_pwm1.dev,
+ .platform_data = &palmtc_backlight_data,
+ },
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static struct pxaficp_platform_data palmtc_ficp_platform_data = {
+ .gpio_pwdown = GPIO_NR_PALMTC_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+};
+
+/******************************************************************************
+ * Keyboard
+ ******************************************************************************/
+static const uint32_t palmtc_matrix_keys[] = {
+ KEY(0, 0, KEY_F1),
+ KEY(0, 1, KEY_X),
+ KEY(0, 2, KEY_POWER),
+ KEY(0, 3, KEY_TAB),
+ KEY(0, 4, KEY_A),
+ KEY(0, 5, KEY_Q),
+ KEY(0, 6, KEY_LEFTSHIFT),
+ KEY(0, 7, KEY_Z),
+ KEY(0, 8, KEY_S),
+ KEY(0, 9, KEY_W),
+ KEY(0, 10, KEY_E),
+ KEY(0, 11, KEY_UP),
+
+ KEY(1, 0, KEY_F2),
+ KEY(1, 1, KEY_DOWN),
+ KEY(1, 3, KEY_D),
+ KEY(1, 4, KEY_C),
+ KEY(1, 5, KEY_F),
+ KEY(1, 6, KEY_R),
+ KEY(1, 7, KEY_SPACE),
+ KEY(1, 8, KEY_V),
+ KEY(1, 9, KEY_G),
+ KEY(1, 10, KEY_T),
+ KEY(1, 11, KEY_LEFT),
+
+ KEY(2, 0, KEY_F3),
+ KEY(2, 1, KEY_LEFTCTRL),
+ KEY(2, 3, KEY_H),
+ KEY(2, 4, KEY_Y),
+ KEY(2, 5, KEY_N),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_U),
+ KEY(2, 8, KEY_M),
+ KEY(2, 9, KEY_K),
+ KEY(2, 10, KEY_I),
+ KEY(2, 11, KEY_RIGHT),
+
+ KEY(3, 0, KEY_F4),
+ KEY(3, 1, KEY_ENTER),
+ KEY(3, 3, KEY_DOT),
+ KEY(3, 4, KEY_L),
+ KEY(3, 5, KEY_O),
+ KEY(3, 6, KEY_LEFTALT),
+ KEY(3, 7, KEY_ENTER),
+ KEY(3, 8, KEY_BACKSPACE),
+ KEY(3, 9, KEY_P),
+ KEY(3, 10, KEY_B),
+ KEY(3, 11, KEY_FN),
+};
+
+const struct matrix_keymap_data palmtc_keymap_data = {
+ .keymap = palmtc_matrix_keys,
+ .keymap_size = ARRAY_SIZE(palmtc_matrix_keys),
+};
+
+const static unsigned int palmtc_keypad_row_gpios[] = {
+ 0, 9, 10, 11
+};
+
+const static unsigned int palmtc_keypad_col_gpios[] = {
+ 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
+};
+
+static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
+ .keymap_data = &palmtc_keymap_data,
+ .col_gpios = palmtc_keypad_row_gpios,
+ .num_col_gpios = 12,
+ .row_gpios = palmtc_keypad_col_gpios,
+ .num_row_gpios = 4,
+ .active_low = 1,
+
+ .debounce_ms = 20,
+ .col_scan_delay_us = 5,
+};
+
+static struct platform_device palmtc_keyboard = {
+ .name = "matrix-keypad",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtc_keypad_platform_data,
+ },
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+ .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
+ .gpio_vbus_inverted = 1,
+ .gpio_pullup = GPIO_NR_PALMTC_USB_POWER,
+};
+
+/******************************************************************************
+ * Touchscreen / Battery / GPIO-extender
+ ******************************************************************************/
+static struct platform_device palmtc_ucb1400_core = {
+ .name = "ucb1400_core",
+ .id = -1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct resource palmtc_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mtd_partition palmtc_flash_parts[] = {
+ {
+ .name = "U-Boot Bootloader",
+ .offset = 0x0,
+ .size = 0x40000,
+ },
+ {
+ .name = "Linux Kernel",
+ .offset = 0x40000,
+ .size = 0x2c0000,
+ },
+ {
+ .name = "Filesystem",
+ .offset = 0x300000,
+ .size = 0xcc0000,
+ },
+ {
+ .name = "U-Boot Environment",
+ .offset = 0xfc0000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data palmtc_flash_data = {
+ .width = 4,
+ .parts = palmtc_flash_parts,
+ .nr_parts = ARRAY_SIZE(palmtc_flash_parts),
+};
+
+static struct platform_device palmtc_flash = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &palmtc_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &palmtc_flash_data,
+ },
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtc_lcd_modes[] = {
+{
+ .pixclock = 115384,
+ .xres = 320,
+ .yres = 320,
+ .bpp = 16,
+
+ .left_margin = 27,
+ .right_margin = 7,
+ .upper_margin = 7,
+ .lower_margin = 8,
+
+ .hsync_len = 6,
+ .vsync_len = 1,
+},
+};
+
+static struct pxafb_mach_info palmtc_lcd_screen = {
+ .modes = palmtc_lcd_modes,
+ .num_modes = ARRAY_SIZE(palmtc_lcd_modes),
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+ &palmtc_backlight,
+ &palmtc_ucb1400_core,
+ &palmtc_keyboard,
+ &palmtc_pxa_keys,
+ &palmtc_flash,
+};
+
+static void __init palmtc_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+
+ set_pxa_fb_info(&palmtc_lcd_screen);
+ pxa_set_mci_info(&palmtc_mci_platform_data);
+ pxa_set_udc_info(&palmtc_udc_info);
+ pxa_set_ac97_info(NULL);
+ pxa_set_ficp_info(&palmtc_ficp_platform_data);
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+};
+
+MACHINE_START(PALMTC, "Palm Tungsten|C")
+ .phys_io = 0x40000000,
+ .boot_params = 0xa0000100,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+ .init_machine = palmtc_init
+MACHINE_END
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
-static int palmte2_mci_init(struct device *dev,
- irq_handler_t palmte2_detect_int, void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
- palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
- }
-
- err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmte2_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
- gpio_free(GPIO_NR_PALMTE2_SD_POWER);
- free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
- gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-}
-
-static void palmte2_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmte2_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
-}
-
static struct pxamci_platform_data palmte2_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmte2_mci_power,
- .get_ro = palmte2_mci_get_ro,
- .init = palmte2_mci_init,
- .exit = palmte2_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMTE2_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMTE2_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMTE2_SD_POWER,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmte2_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmte2_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-}
-
-static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmte2_ficp_platform_data = {
- .startup = palmte2_irda_startup,
- .shutdown = palmte2_irda_shutdown,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = palmte2_irda_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_PALMTE2_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
+ /* NAND */
+ GPIO15_nCS_1,
+ GPIO18_RDY,
+
/* MISC. */
GPIO10_GPIO, /* hotsync button */
GPIO12_GPIO, /* power detect */
};
/******************************************************************************
- * SD/MMC card controller
+ * NOR Flash
******************************************************************************/
-static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
- void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
- palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
+static struct mtd_partition palmtx_partitions[] = {
+ {
+ .name = "Flash",
+ .offset = 0x00000000,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
}
+};
- err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_PALMTX_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmtx_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMTX_SD_READONLY);
- gpio_free(GPIO_NR_PALMTX_SD_POWER);
- free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
- gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-}
+static struct physmap_flash_data palmtx_flash_data[] = {
+ {
+ .width = 2, /* bankwidth in bytes */
+ .parts = palmtx_partitions,
+ .nr_parts = ARRAY_SIZE(palmtx_partitions)
+ }
+};
-static void palmtx_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
+static struct resource palmtx_flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_8M - 1,
+ .flags = IORESOURCE_MEM,
+};
-static int palmtx_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
-}
+static struct platform_device palmtx_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .resource = &palmtx_flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = palmtx_flash_data,
+ },
+};
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
static struct pxamci_platform_data palmtx_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmtx_mci_power,
- .get_ro = palmtx_mci_get_ro,
- .init = palmtx_mci_init,
- .exit = palmtx_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMTX_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMTX_SD_READONLY,
+ .gpio_power = GPIO_NR_PALMTX_SD_POWER,
+ .detect_delay = 20,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmtx_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmtx_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-}
-
-static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmtx_ficp_platform_data = {
- .startup = palmtx_irda_startup,
- .shutdown = palmtx_irda_shutdown,
- .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
- .transceiver_mode = palmtx_irda_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_PALMTX_IR_DISABLE,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
+/******************************************************************************
+ * NAND Flash
+ ******************************************************************************/
+static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, PALMTX_NAND_CLE_VIRT);
+ else if (ctrl & NAND_ALE)
+ writeb(cmd, PALMTX_NAND_ALE_VIRT);
+ else
+ writeb(cmd, nandaddr);
+}
+
+static struct mtd_partition palmtx_partition_info[] = {
+ [0] = {
+ .name = "palmtx-0",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data palmtx_nand_platdata = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_offset = 0,
+ .nr_partitions = ARRAY_SIZE(palmtx_partition_info),
+ .partitions = palmtx_partition_info,
+ .chip_delay = 20,
+ .part_probe_types = palmtx_part_probes,
+ },
+ .ctrl = {
+ .cmd_ctrl = palmtx_nand_cmd_ctl,
+ },
+};
+
+static struct resource palmtx_nand_resource[] = {
+ [0] = {
+ .start = PXA_CS1_PHYS,
+ .end = PXA_CS1_PHYS + SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device palmtx_nand = {
+ .name = "gen_nand",
+ .num_resources = ARRAY_SIZE(palmtx_nand_resource),
+ .resource = palmtx_nand_resource,
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_nand_platdata,
+ }
+};
+
/******************************************************************************
* Power management - standby
******************************************************************************/
&power_supply,
&palmtx_asoc,
&palmtx_gpio_vbus,
+ &palmtx_flash,
+ &palmtx_nand,
};
static struct map_desc palmtx_io_desc[] __initdata = {
.virtual = PALMTX_PCMCIA_VIRT,
.pfn = __phys_to_pfn(PALMTX_PCMCIA_PHYS),
.length = PALMTX_PCMCIA_SIZE,
- .type = MT_DEVICE
-},
+ .type = MT_DEVICE,
+}, {
+ .virtual = PALMTX_NAND_ALE_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+}, {
+ .virtual = PALMTX_NAND_CLE_VIRT,
+ .pfn = __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
+ .length = SZ_1M,
+ .type = MT_DEVICE,
+}
};
static void __init palmtx_map_io(void)
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
-static int palmz72_mci_init(struct device *dev,
- irq_handler_t palmz72_detect_int, void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
- if (err)
- goto err;
- err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
- if (err)
- goto err2;
- err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
- palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
- if (err) {
- printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
- }
-
- /* SD_POWER is not actually power, but it is more like chip
- * select, i.e. it is inverted */
-
- err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
- if (err)
- goto err3;
- err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
- if (err)
- goto err4;
- err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
- if (err)
- goto err4;
- err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
- if (err)
- goto err5;
-
- printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_PALMZ72_SD_RO);
-err4:
- gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-err:
- return err;
-}
-
-static void palmz72_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
- free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
- gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
- gpio_free(GPIO_NR_PALMZ72_SD_RO);
-}
-
-static void palmz72_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- if (p_d->ocr_mask & (1 << vdd))
- gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
- else
- gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
-}
-
-static int palmz72_mci_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
-}
-
+/* SD_POWER is not actually power, but it is more like chip
+ * select, i.e. it is inverted */
static struct pxamci_platform_data palmz72_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = palmz72_mci_power,
- .get_ro = palmz72_mci_ro,
- .init = palmz72_mci_init,
- .exit = palmz72_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_PALMZ72_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_PALMZ72_SD_RO,
+ .gpio_power = GPIO_NR_PALMZ72_SD_POWER_N,
+ .gpio_power_invert = 1,
};
/******************************************************************************
/******************************************************************************
* IrDA
******************************************************************************/
-static int palmz72_irda_startup(struct device *dev)
-{
- int err;
- err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
- if (err)
- goto err;
- err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
- if (err)
- gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-err:
- return err;
-}
-
-static void palmz72_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-}
-
-static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
static struct pxaficp_platform_data palmz72_ficp_platform_data = {
- .startup = palmz72_irda_startup,
- .shutdown = palmz72_irda_shutdown,
+ .gpio_pwdown = GPIO_NR_PALMZ72_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = palmz72_irda_transceiver_mode,
};
/******************************************************************************
#define MSECS_PER_JIFFY (1000/HZ)
static struct pxamci_platform_data pcm990_mci_platform_data = {
- .detect_delay = 250 / MSECS_PER_JIFFY,
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .init = pcm990_mci_init,
- .setpower = pcm990_mci_setpower,
- .exit = pcm990_mci_exit,
+ .detect_delay = 250 / MSECS_PER_JIFFY,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .init = pcm990_mci_init,
+ .setpower = pcm990_mci_setpower,
+ .exit = pcm990_mci_exit,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static struct pxaohci_platform_data pcm990_ohci_platform_data = {
gpio_bus_switch = -EINVAL;
}
-static struct soc_camera_link iclink = {
- .bus_id = 0, /* Must match with the camera ID above */
- .query_bus_param = pcm990_camera_query_bus_param,
- .set_bus_param = pcm990_camera_set_bus_param,
- .free_bus = pcm990_camera_free_bus,
-};
-
/* Board I2C devices. */
static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
{
/* Must initialize before the camera(s) */
I2C_BOARD_INFO("pca9536", 0x41),
.platform_data = &pca9536_data,
- }, {
+ },
+};
+
+static struct i2c_board_info pcm990_camera_i2c[] = {
+ {
I2C_BOARD_INFO("mt9v022", 0x48),
- .platform_data = &iclink, /* With extender */
}, {
I2C_BOARD_INFO("mt9m001", 0x5d),
- .platform_data = &iclink, /* With extender */
+ },
+};
+
+static struct soc_camera_link iclink[] = {
+ {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm990_camera_i2c[0],
+ .i2c_adapter_id = 0,
+ .query_bus_param = pcm990_camera_query_bus_param,
+ .set_bus_param = pcm990_camera_set_bus_param,
+ .free_bus = pcm990_camera_free_bus,
+ .module_name = "mt9v022",
+ }, {
+ .bus_id = 0, /* Must match with the camera ID */
+ .board_info = &pcm990_camera_i2c[1],
+ .i2c_adapter_id = 0,
+ .query_bus_param = pcm990_camera_query_bus_param,
+ .set_bus_param = pcm990_camera_set_bus_param,
+ .free_bus = pcm990_camera_free_bus,
+ .module_name = "mt9m001",
+ },
+};
+
+static struct platform_device pcm990_camera[] = {
+ {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &iclink[0],
+ },
+ }, {
+ .name = "soc-camera-pdrv",
+ .id = 1,
+ .dev = {
+ .platform_data = &iclink[1],
+ },
},
};
#endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
pxa_set_camera_info(&pcm990_pxacamera_platform_data);
i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
+
+ platform_device_register(&pcm990_camera[0]);
+ platform_device_register(&pcm990_camera[1]);
#endif
printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
-static struct pxamci_platform_data poodle_mci_platform_data;
-
static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
{
int err;
- err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
- if (err)
- goto err_out;
-
- err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
- if (err)
- goto err_free_1;
-
err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
if (err)
goto err_free_2;
if (err)
goto err_free_3;
- gpio_direction_input(POODLE_GPIO_nSD_DETECT);
- gpio_direction_input(POODLE_GPIO_nSD_WP);
-
gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
- poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
- __func__);
- goto err_free_4;
- }
-
return 0;
-err_free_4:
- gpio_free(POODLE_GPIO_SD_PWR1);
err_free_3:
gpio_free(POODLE_GPIO_SD_PWR);
err_free_2:
- gpio_free(POODLE_GPIO_nSD_WP);
-err_free_1:
- gpio_free(POODLE_GPIO_nSD_DETECT);
-err_out:
return err;
}
}
}
-static int poodle_mci_get_ro(struct device *dev)
-{
- return !!gpio_get_value(POODLE_GPIO_nSD_WP);
- return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
-}
-
-
static void poodle_mci_exit(struct device *dev, void *data)
{
- free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
gpio_free(POODLE_GPIO_SD_PWR1);
gpio_free(POODLE_GPIO_SD_PWR);
- gpio_free(POODLE_GPIO_nSD_WP);
- gpio_free(POODLE_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data poodle_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = poodle_mci_init,
- .get_ro = poodle_mci_get_ro,
- .setpower = poodle_mci_setpower,
- .exit = poodle_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = poodle_mci_init,
+ .setpower = poodle_mci_setpower,
+ .exit = poodle_mci_exit,
+ .gpio_card_detect = POODLE_IRQ_GPIO_nSD_DETECT,
+ .gpio_card_ro = POODLE_GPIO_nSD_WP,
+ .gpio_power = -1,
};
/*
* Irda
*/
-static void poodle_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int poodle_irda_startup(struct device *dev)
-{
- int err;
-
- err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
- if (err)
- return err;
-
- gpio_direction_output(POODLE_GPIO_IR_ON, 1);
- return 0;
-}
-
-static void poodle_irda_shutdown(struct device *dev)
-{
- gpio_free(POODLE_GPIO_IR_ON);
-}
-
static struct pxaficp_platform_data poodle_ficp_platform_data = {
+ .gpio_pwdown = POODLE_GPIO_IR_ON,
.transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = poodle_irda_transceiver_mode,
- .startup = poodle_irda_startup,
- .shutdown = poodle_irda_shutdown,
};
set_pxa_fb_parent(&poodle_locomo_device.dev);
set_pxa_fb_info(&poodle_fb_info);
pxa_set_udc_info(&udc_info);
+ poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&poodle_mci_platform_data);
pxa_set_ficp_info(&poodle_ficp_platform_data);
pxa_set_i2c_info(NULL);
} else
BUG();
}
+EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
};
static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
static struct clk_lookup common_clkregs[] = {
INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
};
static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
};
static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
static struct clk_lookup pxa320_clkregs[] = {
INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
};
static int __init pxa320_init(void)
MFP_ADDR_END,
};
+static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
+ MFP_ADDR(GPIO159, 0x0524),
+ MFP_ADDR(GPIO163, 0x0534),
+ MFP_ADDR(GPIO167, 0x0544),
+ MFP_ADDR(GPIO168, 0x0548),
+ MFP_ADDR(GPIO169, 0x054c),
+ MFP_ADDR(GPIO170, 0x0550),
+ MFP_ADDR(GPIO171, 0x0554),
+ MFP_ADDR(GPIO172, 0x0558),
+ MFP_ADDR(GPIO173, 0x055c),
+
+ MFP_ADDR_END,
+};
+
static int __init pxa930_init(void)
{
- if (cpu_is_pxa930()) {
+ if (cpu_is_pxa930() || cpu_is_pxa935()) {
mfp_init_base(io_p2v(MFPR_BASE));
mfp_init_addr(pxa930_mfp_addr_map);
}
+ if (cpu_is_pxa935())
+ mfp_init_addr(pxa935_mfp_addr_map);
+
return 0;
}
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
GPIO105_GPIO, /* SPITZ_GPIO_CF_IRQ */
GPIO106_GPIO, /* SPITZ_GPIO_CF2_IRQ */
+ /* GPIO matrix keypad */
+ GPIO88_GPIO, /* column 0 */
+ GPIO23_GPIO, /* column 1 */
+ GPIO24_GPIO, /* column 2 */
+ GPIO25_GPIO, /* column 3 */
+ GPIO26_GPIO, /* column 4 */
+ GPIO27_GPIO, /* column 5 */
+ GPIO52_GPIO, /* column 6 */
+ GPIO103_GPIO, /* column 7 */
+ GPIO107_GPIO, /* column 8 */
+ GPIO108_GPIO, /* column 9 */
+ GPIO114_GPIO, /* column 10 */
+ GPIO12_GPIO, /* row 0 */
+ GPIO17_GPIO, /* row 1 */
+ GPIO91_GPIO, /* row 2 */
+ GPIO34_GPIO, /* row 3 */
+ GPIO36_GPIO, /* row 4 */
+ GPIO38_GPIO, /* row 5 */
+ GPIO39_GPIO, /* row 6 */
+
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/*
* Spitz Keyboard Device
*/
+#define SPITZ_KEY_CALENDAR KEY_F1
+#define SPITZ_KEY_ADDRESS KEY_F2
+#define SPITZ_KEY_FN KEY_F3
+#define SPITZ_KEY_CANCEL KEY_F4
+#define SPITZ_KEY_EXOK KEY_F5
+#define SPITZ_KEY_EXCANCEL KEY_F6
+#define SPITZ_KEY_EXJOGDOWN KEY_F7
+#define SPITZ_KEY_EXJOGUP KEY_F8
+#define SPITZ_KEY_JAP1 KEY_LEFTALT
+#define SPITZ_KEY_JAP2 KEY_RIGHTCTRL
+#define SPITZ_KEY_SYNC KEY_F9
+#define SPITZ_KEY_MAIL KEY_F10
+#define SPITZ_KEY_OK KEY_F11
+#define SPITZ_KEY_MENU KEY_F12
+
+static const uint32_t spitzkbd_keymap[] = {
+ KEY(0, 0, KEY_LEFTCTRL),
+ KEY(0, 1, KEY_1),
+ KEY(0, 2, KEY_3),
+ KEY(0, 3, KEY_5),
+ KEY(0, 4, KEY_6),
+ KEY(0, 5, KEY_7),
+ KEY(0, 6, KEY_9),
+ KEY(0, 7, KEY_0),
+ KEY(0, 8, KEY_BACKSPACE),
+ KEY(0, 9, SPITZ_KEY_EXOK), /* EXOK */
+ KEY(0, 10, SPITZ_KEY_EXCANCEL), /* EXCANCEL */
+ KEY(1, 1, KEY_2),
+ KEY(1, 2, KEY_4),
+ KEY(1, 3, KEY_R),
+ KEY(1, 4, KEY_Y),
+ KEY(1, 5, KEY_8),
+ KEY(1, 6, KEY_I),
+ KEY(1, 7, KEY_O),
+ KEY(1, 8, KEY_P),
+ KEY(1, 9, SPITZ_KEY_EXJOGDOWN), /* EXJOGDOWN */
+ KEY(1, 10, SPITZ_KEY_EXJOGUP), /* EXJOGUP */
+ KEY(2, 0, KEY_TAB),
+ KEY(2, 1, KEY_Q),
+ KEY(2, 2, KEY_E),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_G),
+ KEY(2, 5, KEY_U),
+ KEY(2, 6, KEY_J),
+ KEY(2, 7, KEY_K),
+ KEY(3, 0, SPITZ_KEY_ADDRESS), /* ADDRESS */
+ KEY(3, 1, KEY_W),
+ KEY(3, 2, KEY_S),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_V),
+ KEY(3, 5, KEY_H),
+ KEY(3, 6, KEY_M),
+ KEY(3, 7, KEY_L),
+ KEY(3, 9, KEY_RIGHTSHIFT),
+ KEY(4, 0, SPITZ_KEY_CALENDAR), /* CALENDAR */
+ KEY(4, 1, KEY_A),
+ KEY(4, 2, KEY_D),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_B),
+ KEY(4, 5, KEY_N),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 8, KEY_ENTER),
+ KEY(4, 9, KEY_LEFTSHIFT),
+ KEY(5, 0, SPITZ_KEY_MAIL), /* MAIL */
+ KEY(5, 1, KEY_Z),
+ KEY(5, 2, KEY_X),
+ KEY(5, 3, KEY_MINUS),
+ KEY(5, 4, KEY_SPACE),
+ KEY(5, 5, KEY_COMMA),
+ KEY(5, 7, KEY_UP),
+ KEY(5, 10, SPITZ_KEY_FN), /* FN */
+ KEY(6, 0, KEY_SYSRQ),
+ KEY(6, 1, SPITZ_KEY_JAP1), /* JAP1 */
+ KEY(6, 2, SPITZ_KEY_JAP2), /* JAP2 */
+ KEY(6, 3, SPITZ_KEY_CANCEL), /* CANCEL */
+ KEY(6, 4, SPITZ_KEY_OK), /* OK */
+ KEY(6, 5, SPITZ_KEY_MENU), /* MENU */
+ KEY(6, 6, KEY_LEFT),
+ KEY(6, 7, KEY_DOWN),
+ KEY(6, 8, KEY_RIGHT),
+};
+
+static const struct matrix_keymap_data spitzkbd_keymap_data = {
+ .keymap = spitzkbd_keymap,
+ .keymap_size = ARRAY_SIZE(spitzkbd_keymap),
+};
+
+static const uint32_t spitzkbd_row_gpios[] =
+ { 12, 17, 91, 34, 36, 38, 39 };
+static const uint32_t spitzkbd_col_gpios[] =
+ { 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
+
+static struct matrix_keypad_platform_data spitzkbd_pdata = {
+ .keymap_data = &spitzkbd_keymap_data,
+ .row_gpios = spitzkbd_row_gpios,
+ .col_gpios = spitzkbd_col_gpios,
+ .num_row_gpios = ARRAY_SIZE(spitzkbd_row_gpios),
+ .num_col_gpios = ARRAY_SIZE(spitzkbd_col_gpios),
+ .col_scan_delay_us = 10,
+ .debounce_ms = 10,
+ .wakeup = 1,
+};
+
static struct platform_device spitzkbd_device = {
- .name = "spitz-keyboard",
+ .name = "matrix-keypad",
.id = -1,
+ .dev = {
+ .platform_data = &spitzkbd_pdata,
+ },
+};
+
+
+static struct gpio_keys_button spitz_gpio_keys[] = {
+ {
+ .type = EV_PWR,
+ .code = KEY_SUSPEND,
+ .gpio = SPITZ_GPIO_ON_KEY,
+ .desc = "On/Off",
+ .wakeup = 1,
+ },
+ /* Two buttons detecting the lid state */
+ {
+ .type = EV_SW,
+ .code = 0,
+ .gpio = SPITZ_GPIO_SWA,
+ .desc = "Display Down",
+ },
+ {
+ .type = EV_SW,
+ .code = 1,
+ .gpio = SPITZ_GPIO_SWB,
+ .desc = "Lid Closed",
+ },
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+ .buttons = spitz_gpio_keys,
+ .nbuttons = ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &spitz_gpio_keys_platform_data,
+ },
};
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
+ .pressure_max = 1024,
.gpio_pendown = SPITZ_GPIO_TP_INT,
.wait_for_sync = spitz_wait_for_hsync,
};
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
-
-static struct pxamci_platform_data spitz_mci_platform_data;
-
-static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data)
-{
- int err;
-
- err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
- if (err)
- goto err_out;
-
- err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
- if (err)
- goto err_free_1;
-
- gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
- gpio_direction_input(SPITZ_GPIO_nSD_WP);
-
- spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING |
- IRQF_TRIGGER_FALLING,
- "MMC card detect", data);
- if (err) {
- pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
- __func__);
- goto err_free_2;
- }
- return 0;
-
-err_free_2:
- gpio_free(SPITZ_GPIO_nSD_WP);
-err_free_1:
- gpio_free(SPITZ_GPIO_nSD_DETECT);
-err_out:
- return err;
-}
-
static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
}
-static int spitz_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(SPITZ_GPIO_nSD_WP);
-}
-
-static void spitz_mci_exit(struct device *dev, void *data)
-{
- free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
- gpio_free(SPITZ_GPIO_nSD_WP);
- gpio_free(SPITZ_GPIO_nSD_DETECT);
-}
-
static struct pxamci_platform_data spitz_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = spitz_mci_init,
- .get_ro = spitz_mci_get_ro,
- .setpower = spitz_mci_setpower,
- .exit = spitz_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .setpower = spitz_mci_setpower,
+ .gpio_card_detect = SPITZ_GPIO_nSD_DETECT,
+ .gpio_card_ro = SPITZ_GPIO_nSD_WP,
+ .gpio_power = -1,
};
/*
* Irda
*/
-static int spitz_irda_startup(struct device *dev)
-{
- int rc;
-
- rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
- if (rc)
- goto err;
-
- rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
- if (rc)
- goto err_dir;
-
- return 0;
-
-err_dir:
- gpio_free(SPITZ_GPIO_IR_ON);
-err:
- return rc;
-}
-
-static void spitz_irda_shutdown(struct device *dev)
-{
- gpio_free(SPITZ_GPIO_IR_ON);
-}
-
-static void spitz_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-#ifdef CONFIG_MACH_AKITA
-static void akita_irda_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-#endif
static struct pxaficp_platform_data spitz_ficp_platform_data = {
+/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
.transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = spitz_irda_transceiver_mode,
- .startup = spitz_irda_startup,
- .shutdown = spitz_irda_shutdown,
};
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
&spitzkbd_device,
+ &spitz_gpio_keys_device,
&spitzled_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
spitz_init_spi();
platform_add_devices(devices, ARRAY_SIZE(devices));
+ spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&spitz_mci_platform_data);
pxa_set_ohci_info(&spitz_ohci_platform_data);
pxa_set_ficp_info(&spitz_ficp_platform_data);
#if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
static void __init spitz_init(void)
{
+ spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+
platform_scoop_config = &spitz_pcmcia_config;
common_init();
static void __init akita_init(void)
{
- spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
+ spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
/*
* MMC/SD Device
*/
-static struct pxamci_platform_data tosa_mci_platform_data;
-
static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
{
int err;
- tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
- err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
- if (err) {
- printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
- goto err_gpio_detect;
- }
- err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
- if (err)
- goto err_gpio_detect_dir;
-
- err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
- IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- "MMC/SD card detect", data);
- if (err) {
- printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
- goto err_irq;
- }
-
- err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
- if (err) {
- printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
- goto err_gpio_wp;
- }
- err = gpio_direction_input(TOSA_GPIO_SD_WP);
- if (err)
- goto err_gpio_wp_dir;
-
- err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
- if (err) {
- printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
- goto err_gpio_pwr;
- }
- err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
- if (err)
- goto err_gpio_pwr_dir;
-
err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
if (err) {
printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
err_gpio_int_dir:
gpio_free(TOSA_GPIO_nSD_INT);
err_gpio_int:
-err_gpio_pwr_dir:
- gpio_free(TOSA_GPIO_PWR_ON);
-err_gpio_pwr:
-err_gpio_wp_dir:
- gpio_free(TOSA_GPIO_SD_WP);
-err_gpio_wp:
- free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-err_irq:
-err_gpio_detect_dir:
- gpio_free(TOSA_GPIO_nSD_DETECT);
-err_gpio_detect:
return err;
}
-static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data* p_d = dev->platform_data;
-
- if (( 1 << vdd) & p_d->ocr_mask) {
- gpio_set_value(TOSA_GPIO_PWR_ON, 1);
- } else {
- gpio_set_value(TOSA_GPIO_PWR_ON, 0);
- }
-}
-
-static int tosa_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(TOSA_GPIO_SD_WP);
-}
-
static void tosa_mci_exit(struct device *dev, void *data)
{
gpio_free(TOSA_GPIO_nSD_INT);
- gpio_free(TOSA_GPIO_PWR_ON);
- gpio_free(TOSA_GPIO_SD_WP);
- free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
- gpio_free(TOSA_GPIO_nSD_DETECT);
}
static struct pxamci_platform_data tosa_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = tosa_mci_init,
- .get_ro = tosa_mci_get_ro,
- .setpower = tosa_mci_setpower,
- .exit = tosa_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = tosa_mci_init,
+ .exit = tosa_mci_exit,
+ .gpio_card_detect = TOSA_GPIO_nSD_DETECT,
+ .gpio_card_ro = TOSA_GPIO_SD_WP,
+ .gpio_power = TOSA_GPIO_PWR_ON,
};
/*
}
static struct pxaficp_platform_data tosa_ficp_platform_data = {
- .transceiver_cap = IR_SIRMODE | IR_OFF,
- .transceiver_mode = tosa_irda_transceiver_mode,
- .startup = tosa_irda_startup,
- .shutdown = tosa_irda_shutdown,
+ .gpio_pwdown = -1,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
+ .transceiver_mode = tosa_irda_transceiver_mode,
+ .startup = tosa_irda_startup,
+ .shutdown = tosa_irda_shutdown,
};
/*
dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+ tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
pxa_set_mci_info(&tosa_mci_platform_data);
pxa_set_udc_info(&udc_info);
pxa_set_ficp_info(&tosa_ficp_platform_data);
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
-static int treo680_mci_init(struct device *dev,
- irq_handler_t treo680_detect_int, void *data)
-{
- int err = 0;
-
- /* Setup an interrupt for detecting card insert/remove events */
- err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
-
- if (err)
- goto err;
-
- err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
- if (err)
- goto err2;
-
- err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
- treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
- IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
- "SD/MMC card detect", data);
-
- if (err) {
- dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
- __func__);
- goto err2;
- }
-
- err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
- if (err)
- goto err3;
-
- err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
- if (err)
- goto err4;
-
- err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
- if (err)
- goto err4;
-
- err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
- if (err)
- goto err5;
-
- return 0;
-
-err5:
- gpio_free(GPIO_NR_TREO680_SD_READONLY);
-err4:
- gpio_free(GPIO_NR_TREO680_SD_POWER);
-err3:
- free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-err2:
- gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-err:
- return err;
-}
-
-static void treo680_mci_exit(struct device *dev, void *data)
-{
- gpio_free(GPIO_NR_TREO680_SD_READONLY);
- gpio_free(GPIO_NR_TREO680_SD_POWER);
- free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
- gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-}
-
-static void treo680_mci_power(struct device *dev, unsigned int vdd)
-{
- struct pxamci_platform_data *p_d = dev->platform_data;
- gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int treo680_mci_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
-}
-
static struct pxamci_platform_data treo680_mci_platform_data = {
- .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
- .setpower = treo680_mci_power,
- .get_ro = treo680_mci_get_ro,
- .init = treo680_mci_init,
- .exit = treo680_mci_exit,
+ .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+ .gpio_card_detect = GPIO_NR_TREO680_SD_DETECT_N,
+ .gpio_card_ro = GPIO_NR_TREO680_SD_READONLY,
+ .gpio_power = GPIO_NR_TREO680_SD_POWER,
};
/******************************************************************************
ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
if (ret)
goto err2;
- ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
- if (ret)
- goto err2;
- ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
- if (ret)
- goto err3;
return 0;
-err3:
- gpio_free(GPIO_NR_TREO680_LCD_POWER);
+
err2:
gpio_free(GPIO_NR_TREO680_BL_POWER);
err:
static void treo680_backlight_exit(struct device *dev)
{
gpio_free(GPIO_NR_TREO680_BL_POWER);
- gpio_free(GPIO_NR_TREO680_LCD_POWER);
}
static struct platform_pwm_backlight_data treo680_backlight_data = {
/******************************************************************************
* IrDA
******************************************************************************/
-static void treo680_transceiver_mode(struct device *dev, int mode)
-{
- gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
- pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int treo680_irda_startup(struct device *dev)
-{
- int err;
-
- err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
- if (err)
- goto err1;
-
- err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
- if (err)
- goto err2;
-
- return 0;
-
-err2:
- dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
- gpio_free(GPIO_NR_TREO680_IR_EN);
-err1:
- dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
- return err;
-}
-
-static void treo680_irda_shutdown(struct device *dev)
-{
- gpio_free(GPIO_NR_TREO680_IR_EN);
-}
-
static struct pxaficp_platform_data treo680_ficp_info = {
- .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF,
- .startup = treo680_irda_startup,
- .shutdown = treo680_irda_shutdown,
- .transceiver_mode = treo680_transceiver_mode,
+ .gpio_pwdown = GPIO_NR_TREO680_IR_EN,
+ .transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
},
};
+static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+ gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+}
+
static struct pxafb_mach_info treo680_lcd_screen = {
.modes = treo680_lcd_modes,
.num_modes = ARRAY_SIZE(treo680_lcd_modes),
}
}
+static void __init treo680_lcd_power_init(void)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+ if (ret) {
+ pr_err("Treo680: LCD power GPIO request failed!\n");
+ return;
+ }
+
+ ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+ if (ret) {
+ pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+ gpio_free(GPIO_NR_TREO680_LCD_POWER);
+ return;
+ }
+
+ treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+}
+
static void __init treo680_init(void)
{
treo680_pm_init();
pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
pxa_set_keypad_info(&treo680_keypad_platform_data);
+ treo680_lcd_power_init();
set_pxa_fb_info(&treo680_lcd_screen);
pxa_set_mci_info(&treo680_mci_platform_data);
treo680_udc_init();
.exit = trizeps4_mci_exit,
.get_ro = NULL, /* write-protection not supported */
.setpower = NULL, /* power-switching not supported */
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
/****************************************************************************
}
static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+ .gpio_pwdown = -1,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = trizeps4_irda_transceiver_mode,
.startup = trizeps4_irda_startup,
--- /dev/null
+/* linux/arch/arm/mach-pxa/xcep.c
+ *
+ * Support for the Iskratel Electronics XCEP platform as used in
+ * the Libera instruments from Instrumentation Technologies.
+ *
+ * Author: Ales Bardorfer <ales@i-tech.si>
+ * Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
+ * Contributions by: Matej Kenda <matej.kenda@i-tech.si>
+ * Created: June 2006
+ * Copyright: (C) 2006-2009 Instrumentation Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <plat/i2c.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#include "generic.h"
+
+#define XCEP_ETH_PHYS (PXA_CS3_PHYS + 0x00000300)
+#define XCEP_ETH_PHYS_END (PXA_CS3_PHYS + 0x000fffff)
+#define XCEP_ETH_ATTR (PXA_CS3_PHYS + 0x02000000)
+#define XCEP_ETH_ATTR_END (PXA_CS3_PHYS + 0x020fffff)
+#define XCEP_ETH_IRQ IRQ_GPIO0
+
+/* XCEP CPLD base */
+#define XCEP_CPLD_BASE 0xf0000000
+
+
+/* Flash partitions. */
+
+static struct mtd_partition xcep_partitions[] = {
+ {
+ .name = "Bootloader",
+ .size = 0x00040000,
+ .offset = 0,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "Bootloader ENV",
+ .size = 0x00040000,
+ .offset = 0x00040000,
+ .mask_flags = MTD_WRITEABLE
+ }, {
+ .name = "Kernel",
+ .size = 0x00100000,
+ .offset = 0x00080000,
+ }, {
+ .name = "Rescue fs",
+ .size = 0x00280000,
+ .offset = 0x00180000,
+ }, {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0x00400000
+ }
+};
+
+static struct physmap_flash_data xcep_flash_data[] = {
+ {
+ .width = 4, /* bankwidth in bytes */
+ .parts = xcep_partitions,
+ .nr_parts = ARRAY_SIZE(xcep_partitions)
+ }
+};
+
+static struct resource flash_resource = {
+ .start = PXA_CS0_PHYS,
+ .end = PXA_CS0_PHYS + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = xcep_flash_data,
+ },
+ .resource = &flash_resource,
+ .num_resources = 1,
+};
+
+
+
+/* SMC LAN91C111 network controller. */
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .name = "smc91x-regs",
+ .start = XCEP_ETH_PHYS,
+ .end = XCEP_ETH_PHYS_END,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = XCEP_ETH_IRQ,
+ .end = XCEP_ETH_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .name = "smc91x-attrib",
+ .start = XCEP_ETH_ATTR,
+ .end = XCEP_ETH_ATTR_END,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct smc91x_platdata xcep_smc91x_info = {
+ .flags = SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+ .dev = {
+ .platform_data = &xcep_smc91x_info,
+ },
+};
+
+
+static struct platform_device *devices[] __initdata = {
+ &flash_device,
+ &smc91x_device,
+};
+
+
+/* We have to state that there are HWMON devices on the I2C bus on XCEP.
+ * Drivers for HWMON verify capabilities of the adapter when loading and
+ * refuse to attach if the adapter doesn't support HWMON class of devices.
+ * See also Documentation/i2c/porting-clients. */
+static struct i2c_pxa_platform_data xcep_i2c_platform_data = {
+ .class = I2C_CLASS_HWMON
+};
+
+
+static mfp_cfg_t xcep_pin_config[] __initdata = {
+ GPIO79_nCS_3, /* SMC 91C111 chip select. */
+ GPIO80_nCS_4, /* CPLD chip select. */
+ /* SSP communication to MSP430 */
+ GPIO23_SSP1_SCLK,
+ GPIO24_SSP1_SFRM,
+ GPIO25_SSP1_TXD,
+ GPIO26_SSP1_RXD,
+ GPIO27_SSP1_EXTCLK
+};
+
+static void __init xcep_init(void)
+{
+ pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+
+ /* See Intel XScale Developer's Guide for details */
+ /* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
+ MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+ /* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
+ MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+ pxa_set_i2c_info(&xcep_i2c_platform_data);
+}
+
+MACHINE_START(XCEP, "Iskratel XCEP")
+ .phys_io = 0x40000000,
+ .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
+ .boot_params = 0xa0000100,
+ .init_machine = xcep_init,
+ .map_io = pxa_map_io,
+ .init_irq = pxa25x_init_irq,
+ .timer = &pxa_timer,
+MACHINE_END
+
.init = zylonite_mci_init,
.exit = zylonite_mci_exit,
.get_ro = zylonite_mci_ro,
+ .gpio_card_detect = -1,
+ .gpio_card_ro = -1,
+ .gpio_power = -1,
};
static struct pxamci_platform_data zylonite_mci2_platform_data = {
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/ata_platform.h>
+#include <linux/amba/mmci.h>
#include <asm/clkdev.h>
#include <asm/system.h>
#include <asm/mach/flash.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/hardware/gic.h>
return readl(REALVIEW_SYSMCI) & mask;
}
-struct mmc_platform_data realview_mmc0_plat_data = {
+struct mmci_platform_data realview_mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
.gpio_wp = 17,
.gpio_cd = 16,
};
-struct mmc_platform_data realview_mmc1_plat_data = {
+struct mmci_platform_data realview_mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
.gpio_wp = 19,
static struct clk_lookup lookups[] = {
{ /* UART0 */
- .dev_id = "dev:f1",
+ .dev_id = "dev:uart0",
.clk = &ref24_clk,
}, { /* UART1 */
- .dev_id = "dev:f2",
+ .dev_id = "dev:uart1",
.clk = &ref24_clk,
}, { /* UART2 */
- .dev_id = "dev:f3",
+ .dev_id = "dev:uart2",
.clk = &ref24_clk,
}, { /* UART3 */
- .dev_id = "fpga:09",
+ .dev_id = "fpga:uart3",
.clk = &ref24_clk,
}, { /* KMI0 */
- .dev_id = "fpga:06",
+ .dev_id = "fpga:kmi0",
.clk = &ref24_clk,
}, { /* KMI1 */
- .dev_id = "fpga:07",
+ .dev_id = "fpga:kmi1",
.clk = &ref24_clk,
}, { /* MMC0 */
- .dev_id = "fpga:05",
+ .dev_id = "fpga:mmc0",
.clk = &ref24_clk,
}, { /* EB:CLCD */
- .dev_id = "dev:20",
+ .dev_id = "dev:clcd",
.clk = &oscvco_clk,
}, { /* PB:CLCD */
- .dev_id = "issp:20",
+ .dev_id = "issp:clcd",
.clk = &oscvco_clk,
}
};
extern struct platform_device realview_flash_device;
extern struct platform_device realview_cf_device;
extern struct platform_device realview_i2c_device;
-extern struct mmc_platform_data realview_mmc0_plat_data;
-extern struct mmc_platform_data realview_mmc1_plat_data;
+extern struct mmci_platform_data realview_mmc0_plat_data;
+extern struct mmci_platform_data realview_mmc1_plat_data;
extern struct clcd_board clcd_plat_data;
extern void __iomem *gic_cpu_base_addr;
extern void __iomem *timer0_va_base;
extern int realview_flash_register(struct resource *res, u32 num);
extern int realview_eth_register(const char *name, struct resource *res);
extern int realview_usb_register(struct resource *res);
-
+extern void (*realview_reset)(char);
#endif
#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
+/*
+ * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ */
+#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL 0x0100
+
#endif /* __ASM_ARCH_BOARD_PB1176_H */
#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
+ /*
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR 0x01
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT 0x02
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET 0x03
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET 0x04
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR 0x05
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC 0x06
+
+#define REALVIEW_PB11MP_SYS_CTRL_LED (1 << 0)
+
#endif /* __ASM_ARCH_BOARD_PB11MP_H */
#define REALVIEW_SYS_TEST_OSC3 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
#define REALVIEW_SYS_TEST_OSC4 (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
-/*
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR 0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT 0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET 0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET 0x04
-#define REALVIEW_SYS_CTRL_RESET_POR 0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC 0x06
-
-#define REALVIEW_SYS_CTRL_LED (1 << 0)
-
-
/* ------------------------------------------------------------------------
* RealView control registers
* ------------------------------------------------------------------------
* SYS_CLD, SYS_BOOTCS
*/
#define REALVIEW_SYS_LOCK_LOCKED (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK 0xFFFF /* write 0xA05F to enable write access */
+#define REALVIEW_SYS_LOCKVAL_MASK 0xA05F /* Enable write access */
/*
* REALVIEW_SYS_FLASH
#include <mach/hardware.h>
#include <mach/platform.h>
+void (*realview_reset)(char mode);
+
static inline void arch_idle(void)
{
/*
static inline void arch_reset(char mode, const char *cmd)
{
- void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
- unsigned int val;
-
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
- val = __raw_readl(hdr_ctrl);
- val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
- __raw_writel(val, hdr_ctrl);
+ if (realview_reset)
+ realview_reset(mode);
}
#endif
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/board-eb.h>
#define EB_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", EB_SMC, NULL);
-AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", EB_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", EB_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL);
+AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/board-pb1176.h>
#define PB1176_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", PB1176_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", PB1176_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", PB1176_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", PB1176_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", PB1176_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, NULL);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:20", PB1176_CLCD, &clcd_plat_data);
-//AMBA_DEVICE(dmac, "issp:30", PB1176_DMAC, NULL);
+AMBA_DEVICE(clcd, "issp:clcd", PB1176_CLCD, &clcd_plat_data);
+//AMBA_DEVICE(dmac, "issp:dmac", PB1176_DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
// &dmac_device,
.init = realview_pb1176_timer_init,
};
+static void realview_pb1176_reset(char mode)
+{
+ void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+ REALVIEW_SYS_RESETCTL_OFFSET;
+ void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+ REALVIEW_SYS_LOCK_OFFSET;
+ __raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
+ __raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+}
+
static void __init realview_pb1176_init(void)
{
int i;
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_pb1176_reset;
}
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/board-pb11mp.h>
#define PB11MP_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", PB11MP_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", PB11MP_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", PB11MP_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", PB11MP_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, NULL);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:20", PB11MP_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
.init = realview_pb11mp_timer_init,
};
+static void realview_pb11mp_reset(char mode)
+{
+ void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+ REALVIEW_SYS_RESETCTL_OFFSET;
+ unsigned int val;
+
+ /*
+ * To reset, we hit the on-board reset register
+ * in the system FPGA
+ */
+ val = __raw_readl(hdr_ctrl);
+ val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
+ __raw_writel(val, hdr_ctrl);
+}
+
static void __init realview_pb11mp_init(void)
{
int i;
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
+ realview_reset = realview_pb11mp_reset;
}
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#define PBA8_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", PBA8_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", PBA8_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", PBA8_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, NULL);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:20", PBA8_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#define PBX_SSP_DMA { 9, 8 }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL);
+AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", PBX_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", PBX_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", PBX_SSP, NULL);
+AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, NULL);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:20", PBX_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
select CPU_S3C2410
select PM_H1940 if PM
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the HP IPAQ H1940
bool "Acer N30 family"
select CPU_S3C2410
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
select S3C24XX_DCLK
select ISA
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
bool "NexVision OTOM Board"
select CPU_S3C2410
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision OTOM board
bool "QT2410"
select CPU_S3C2410
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Armzone QT2410
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/gpio-fns.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
* waiting for reloads */
#define S3C2410_DMAF_AUTOSTART (1<<1) /* auto-start if buffer queued */
+#define S3C2410_DMAF_CIRCULAR (1 << 2) /* no circular dma support */
+
/* dma buffer */
struct s3c2410_dma_buf;
typedef unsigned long dma_device_t;
+static inline bool s3c_dma_has_circular(void)
+{
+ return false;
+}
+
#endif /* __ASM_ARCH_DMA_H */
bool "Logitech Jive"
select CPU_S3C2412
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Logitech Jive.
select MACH_S3C2413
select MACH_SMDK
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using an SMDK2413
bool "VMSTMS"
select CPU_S3C2412
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using an VSTMS board
select S3C2440_XTAL_12000000
select S3C2410_IOTIMING if S3C2440_CPUFREQ
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
select CPU_S3C2440
select S3C2440_XTAL_16934400
select PM_H1940 if PM
+ select S3C_DEV_NAND
help
Say Y here if you are using the HP iPAQ rx3715.
select S3C2440_XTAL_16934400
select MACH_SMDK
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the SMDK2440.
select CPU_S3C2440
select S3C2440_XTAL_12000000
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
help
Say Y here if you are using the AT2440EVB development board
select EEPROM_AT24
select LEDS_TRIGGER_BACKLIGHT
select SND_S3C24XX_SOC_S3C24XX_UDA134X
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
help
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
.type = (S3C2410_LCDCON1_TFT16BPP |\
S3C2410_LCDCON1_TFT)
-struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
[0] = { /* mini2440 + 3.5" TFT + touchscreen */
_LCD_DECLARE(
7, /* The 3.5 is quite fast */
#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
.displays = &mini2440_lcd_cfg[0], /* not constant! see init */
.num_displays = 1,
.default_display = 0,
bool "SMDK6400"
select CPU_S3C6400
select S3C_DEV_HSMMC
+ select S3C_DEV_NAND
select S3C6400_SETUP_SDHCI
help
Machine support for the Samsung SMDK6400
#define S3C2410_DMAF_CIRCULAR (1 << 0)
+static inline bool s3c_dma_has_circular(void)
+{
+ return false;
+}
+
#include <plat/dma.h>
#endif /* __ASM_ARCH_IRQ_H */
bool "Airgoo HMT"
select CPU_S3C6410
select S3C_DEV_FB
+ select S3C_DEV_NAND
select S3C_DEV_USB_HOST
select S3C64XX_SETUP_FB_24BPP
select HAVE_PWM
<http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
<http://www.compaq.com/products/handhelds/pocketpc/>
-config SA1100_H3XXX
- bool
- depends on SA1100_H3100 || SA1100_H3600
- default y
-
config SA1100_BADGE4
bool "HP Labs BadgePAD 4"
select SA1111
obj-$(CONFIG_SA1100_COLLIE) += collie.o
+obj-$(CONFIG_SA1100_H3100) += h3600.o
obj-$(CONFIG_SA1100_H3600) += h3600.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
-static spinlock_t dma_list_lock;
+static DEFINE_SPINLOCK(dma_list_lock);
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
.set_mode = sa1100_osmr0_set_mode,
};
-static cycle_t sa1100_read_oscr(void)
+static cycle_t sa1100_read_oscr(struct clocksource *s)
{
return OSCR;
}
Memory Interface) from both from access and application
side.
+config MACH_U300_SPIDUMMY
+ bool "SSP/SPI dummy chip"
+ select SPI
+ select SPI_MASTER
+ select SPI_PL022
+ help
+ This creates a small kernel module that creates a dummy
+ SPI device to be used for loopback tests. Regularly used
+ to test reference designs. If you're not testing SPI,
+ you don't need it. Selecting this will activate the
+ SPI framework and ARM PL022 support.
+
comment "All the settings below must match the bootloader's settings"
config MACH_U300_ACCESS_MEM_SIZE
obj-$(CONFIG_ARCH_U300) += u300.o
obj-$(CONFIG_MMC) += mmc.o
+obj-$(CONFIG_SPI_PL022) += spi.o
+obj-$(CONFIG_MACH_U300_SPIDUMMY) += dummyspichip.o
+obj-$(CONFIG_I2C_STU300) += i2c.o
#include "clock.h"
#include "mmc.h"
+#include "spi.h"
+#include "i2c.h"
/*
* Static I/O mappings that are needed for booting the U300 platforms. The
};
static struct platform_device i2c0_device = {
- .name = "stddci2c",
+ .name = "stu300",
.id = 0,
.num_resources = ARRAY_SIZE(i2c0_resources),
.resource = i2c0_resources,
};
static struct platform_device i2c1_device = {
- .name = "stddci2c",
+ .name = "stu300",
.id = 1,
.num_resources = ARRAY_SIZE(i2c1_resources),
.resource = i2c1_resources,
/* Wait for the PLL208 to lock if not locked in yet */
while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
U300_SYSCON_CSR_PLL208_LOCK_IND));
+ /* Initialize SPI device with some board specifics */
+ u300_spi_init(&pl022_device);
/* Register the AMBA devices in the AMBA bus abstraction layer */
u300_clock_primecells();
u300_assign_physmem();
+ /* Register subdevices on the I2C buses */
+ u300_i2c_register_board_devices();
+
+ /* Register subdevices on the SPI bus */
+ u300_spi_register_board_devices();
+
/* Register the platform devices */
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
--- /dev/null
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+ struct device *dev;
+ struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct spi_device *spi = to_spi_device(dev);
+ struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+ /*
+ * WARNING! Do not dereference the chip-specific data in any normal
+ * driver for a chip. It is usually STATIC and shall not be read
+ * or written to. Your chip driver should NOT depend on fields in this
+ * struct, this is just used here to alter the behaviour of the chip
+ * in order to perform tests.
+ */
+ struct pl022_config_chip *chip_info = spi->controller_data;
+ int status;
+ u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+ 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+ 0xF0, 0x0D};
+ u8 rxbuf[14];
+ u8 *bigtxbuf_virtual;
+ u8 *bigrxbuf_virtual;
+
+ if (mutex_lock_interruptible(&p_dummy->lock))
+ return -ERESTARTSYS;
+
+ bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+ if (bigtxbuf_virtual == NULL) {
+ status = -ENOMEM;
+ goto out;
+ }
+ bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+ /* Fill TXBUF with some happy pattern */
+ memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+ /*
+ * Force chip to 8 bit mode
+ * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+ */
+ chip_info->data_size = SSP_DATA_BITS_8;
+ /* You should NOT DO THIS EITHER */
+ spi->master->setup(spi);
+
+ /* Now run the tests for 8bit mode */
+ pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+ "in 8bit mode\n");
+ status = spi_w8r8(spi, 0xAA);
+ if (status < 0)
+ pr_warning("Siple test 1: FAILURE: spi_write_then_read "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 1: SUCCESS!\n");
+
+ pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+ "in 8bit mode (full FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 2: SUCCESS!\n");
+
+ pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+ "in 8bit mode (see if we overflow FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warning("Simple test 3: FAILURE: failed with status %d "
+ "(probably FIFO overrun)\n", status);
+ else
+ pr_info("Simple test 3: SUCCESS!\n");
+
+ pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+ "bytes garbage with spi_read() in 8bit mode\n");
+ status = spi_write(spi, &txbuf[0], 8);
+ if (status < 0)
+ pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 4 step 1: SUCCESS!\n");
+ status = spi_read(spi, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+ pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+ "14 bytes garbage with spi_read() in 8bit mode\n");
+ status = spi_write(spi, &txbuf[0], 14);
+ if (status < 0)
+ pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 5 step 1: SUCCESS!\n");
+ status = spi_read(spi, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 5: SUCCESS!\n");
+
+ pr_info("Simple test 6: write %d bytes with spi_write(), "
+ "read %d bytes garbage with spi_read() in 8bit mode\n",
+ DMA_TEST_SIZE, DMA_TEST_SIZE);
+ status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 6 step 1: SUCCESS!\n");
+ status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 6: SUCCESS!\n");
+
+
+ /*
+ * Force chip to 16 bit mode
+ * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+ */
+ chip_info->data_size = SSP_DATA_BITS_16;
+ /* You should NOT DO THIS EITHER */
+ spi->master->setup(spi);
+
+ pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+ "in 16bit bus mode\n");
+ status = spi_w8r8(spi, 0xAA);
+ if (status == -EIO)
+ pr_info("Simple test 7: SUCCESS! (expected failure with "
+ "status EIO)\n");
+ else if (status < 0)
+ pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+ "failed with status %d\n", status);
+ else
+ pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+ "succeeded but it was expected to fail!\n");
+
+ pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+ "in 16bit mode (full FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+ if (status < 0)
+ pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
+ "failed with status %d\n", status);
+ else
+ pr_info("Simple test 8: SUCCESS!\n");
+
+ pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+ "in 16bit mode (see if we overflow FIFO)\n");
+ status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+ if (status < 0)
+ pr_warning("Simple test 9: FAILURE: failed with status %d "
+ "(probably FIFO overrun)\n", status);
+ else
+ pr_info("Simple test 9: SUCCESS!\n");
+
+ pr_info("Simple test 10: write %d bytes with spi_write(), "
+ "read %d bytes garbage with spi_read() in 16bit mode\n",
+ DMA_TEST_SIZE, DMA_TEST_SIZE);
+ status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+ status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+ if (status < 0)
+ pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
+ "failed with status %d (probably FIFO overrun)\n",
+ status);
+ else
+ pr_info("Simple test 10: SUCCESS!\n");
+
+ status = sprintf(buf, "loop test complete\n");
+ kfree(bigrxbuf_virtual);
+ kfree(bigtxbuf_virtual);
+ out:
+ mutex_unlock(&p_dummy->lock);
+ return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int __devinit pl022_dummy_probe(struct spi_device *spi)
+{
+ struct dummy *p_dummy;
+ int status;
+
+ dev_info(&spi->dev, "probing dummy SPI device\n");
+
+ p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+ if (!p_dummy)
+ return -ENOMEM;
+
+ dev_set_drvdata(&spi->dev, p_dummy);
+ mutex_init(&p_dummy->lock);
+
+ /* sysfs hook */
+ status = device_create_file(&spi->dev, &dev_attr_looptest);
+ if (status) {
+ dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+ goto out_dev_create_looptest_failed;
+ }
+
+ return 0;
+
+out_dev_create_looptest_failed:
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(p_dummy);
+ return status;
+}
+
+static int __devexit pl022_dummy_remove(struct spi_device *spi)
+{
+ struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+ dev_info(&spi->dev, "removing dummy SPI device\n");
+ device_remove_file(&spi->dev, &dev_attr_looptest);
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(p_dummy);
+
+ return 0;
+}
+
+static struct spi_driver pl022_dummy_driver = {
+ .driver = {
+ .name = "spi-dummy",
+ .owner = THIS_MODULE,
+ },
+ .probe = pl022_dummy_probe,
+ .remove = __devexit_p(pl022_dummy_remove),
+};
+
+static int __init pl022_init_dummy(void)
+{
+ return spi_register_driver(&pl022_dummy_driver);
+}
+
+static void __exit pl022_exit_dummy(void)
+{
+ spi_unregister_driver(&pl022_dummy_driver);
+}
+
+module_init(pl022_init_dummy);
+module_exit(pl022_exit_dummy);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
#include <linux/platform_device.h>
#include <linux/gpio.h>
-/* Need access to SYSCON registers for PADmuxing */
-#include <mach/syscon.h>
-
-#include "padmux.h"
-
/* Reference to GPIO block clock */
static struct clk *clk;
}
EXPORT_SYMBOL(gpio_unregister_callback);
+/* Non-zero means valid */
+int gpio_is_valid(int number)
+{
+ if (number >= 0 &&
+ number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
+ return 1;
+ return 0;
+}
+EXPORT_SYMBOL(gpio_is_valid);
+
int gpio_request(unsigned gpio, const char *label)
{
if (gpio_pin[gpio].users)
writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
#endif
- /* Set up some padmuxing here */
-#ifdef CONFIG_MMC
- pmx_set_mission_mode_mmc();
-#endif
-#ifdef CONFIG_SPI_PL022
- pmx_set_mission_mode_spi();
-#endif
-
gpio_set_initial_values();
for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
--- /dev/null
+/*
+ * arch/arm/mach-u300/i2c.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <mach/irqs.h>
+
+static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+ {
+ .type = "ab3100",
+ .addr = 0x48,
+ .irq = IRQ_U300_IRQ0_EXT,
+ },
+};
+
+static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .type = "fwcam",
+ .addr = 0x10,
+ },
+ {
+ .type = "fwcam",
+ .addr = 0x5d,
+ },
+#else
+ { },
+#endif
+};
+
+void __init u300_i2c_register_board_devices(void)
+{
+ i2c_register_board_info(0, bus0_i2c_board_info,
+ ARRAY_SIZE(bus0_i2c_board_info));
+ i2c_register_board_info(1, bus1_i2c_board_info,
+ ARRAY_SIZE(bus1_i2c_board_info));
+}
--- /dev/null
+/*
+ * arch/arm/mach-u300/i2c.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef MACH_U300_I2C_H
+#define MACH_U300_I2C_H
+
+#ifdef CONFIG_I2C_STU300
+void __init u300_i2c_register_board_devices(void);
+#else
+/* Compile out this stuff if no I2C adapter is available */
+static inline void __init u300_i2c_register_board_devices(void)
+{
+}
+#endif
+
+#endif
#define PIN_TO_PORT(val) (val >> 3)
/* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_is_valid(int number);
extern int gpio_request(unsigned gpio, const char *label);
extern void gpio_free(unsigned gpio);
extern int gpio_direction_input(unsigned gpio);
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
#endif
+/*
+ * TCM memory whereabouts
+ */
+#define ITCM_OFFSET 0xffff2000
+#define ITCM_END 0xffff3fff
+#define DTCM_OFFSET 0xffff4000
+#define DTCM_END 0xffff5fff
+
/*
* We enable a real big DMA buffer if need be.
*/
#define U300_SYSCON_PMC1LR_CDI_MASK (0xC000)
#define U300_SYSCON_PMC1LR_CDI_CDI (0x0000)
#define U300_SYSCON_PMC1LR_CDI_EMIF (0x4000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_PMC1LR_CDI_CDI2 (0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO (0xC000)
+#elif CONFIG_MACH_U300_BS365
#define U300_SYSCON_PMC1LR_CDI_GPIO (0x8000)
#define U300_SYSCON_PMC1LR_CDI_WCDMA (0xC000)
+#endif
#define U300_SYSCON_PMC1LR_PDI_MASK (0x3000)
#define U300_SYSCON_PMC1LR_PDI_PDI (0x0000)
#define U300_SYSCON_PMC1LR_PDI_EGG (0x1000)
#define U300_SYSCON_MMCR_MASK (0x0003)
#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002)
#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001)
-
+/* Pull up/down control (R/W) */
+#define U300_SYSCON_PUCR (0x104)
+#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE (0x0200)
+#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE (0x0100)
+#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE (0x0080)
+#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE (0x0040)
+#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK (0x003F)
+/* Padmux 2 control */
+#define U300_SYSCON_PMC2R (0x100)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MASK (0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM (0x0040)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MMC (0x0080)
+#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2 (0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MASK (0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM (0x0100)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MMC (0x0200)
+#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2 (0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MASK (0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM (0x0400)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MMC (0x0800)
+#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2 (0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MASK (0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM (0x1000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MMC (0x2000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2 (0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MASK (0xC000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM (0x4000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MMC (0x8000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO (0xC000)
/* TODO: More SYSCON registers missing */
#define U300_SYSCON_PMC3R (0x10c)
#define U300_SYSCON_PMC3R_APP_MISC_11_MASK (0xc000)
#define U300_SYSCON_PMC3R_APP_MISC_11_SPI (0x4000)
#define U300_SYSCON_PMC3R_APP_MISC_10_MASK (0x3000)
#define U300_SYSCON_PMC3R_APP_MISC_10_SPI (0x1000)
-/* TODO: Missing other configs, I just added the SPI stuff */
-
+/* TODO: Missing other configs */
+#define U300_SYSCON_PMC4R (0x168)
+#define U300_SYSCON_PMC4R_APP_MISC_12_MASK (0x0003)
+#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO (0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_MASK (0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_13_CDI (0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA (0x0004)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2 (0x0008)
+#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO (0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_14_MASK (0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI (0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA (0x0010)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2 (0x0020)
+#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO (0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_16_MASK (0x0300)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13 (0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS (0x0100)
+#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N (0x0200)
/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
#define U300_SYSCON_S0CCR (0x120)
#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF)
#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000)
#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200)
#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_S1CCR (0x124)
#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF)
#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000)
#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200)
#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF)
#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000)
#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000)
#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200)
#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0)
#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E)
#define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM (0x000C)
#define U300_SYSCON_MCR_PM1G_MODE_ENABLE (0x0002)
#define U300_SYSCON_MCR_PMTG5_MODE_ENABLE (0x0001)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR (0x0130)
+#define U300_SYSCON_PICR_MASK (0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR (0x0134)
+#define U300_SYSCON_PISR_MASK (0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR (0x0138)
+#define U300_SYSCON_PICLR_MASK (0x000F)
+#define U300_SYSCON_PICLR_RWMASK (0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001)
+/* CAMIF_CONTROL 16 bit (-/W) */
+#define U300_SYSCON_CICR (0x013C)
+#define U300_SYSCON_CICR_MASK (0x0FFF)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK (0x0F00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1 (0x0C00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0 (0x0300)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK (0x00F0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1 (0x00C0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0 (0x0030)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK (0x000F)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1 (0x000C)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0 (0x0003)
/* Clock activity observability register 0 */
#define U300_SYSCON_C0OAR (0x140)
#define U300_SYSCON_C0OAR_MASK (0xFFFF)
/**
* CPU medium frequency in MHz
*/
-#define SYSCON_CPU_CLOCK_MEDIUM 104
+#define SYSCON_CPU_CLOCK_MEDIUM 52
/**
* CPU low frequency in MHz
*/
/**
* EMIF medium frequency in MHz
*/
-#define SYSCON_EMIF_CLOCK_MEDIUM 104
+#define SYSCON_EMIF_CLOCK_MEDIUM 52
/**
* EMIF low frequency in MHz
*/
/**
* AHB medium frequency in MHz
*/
-#define SYSCON_AHB_CLOCK_MEDIUM 52
+#define SYSCON_AHB_CLOCK_MEDIUM 26
/**
* AHB low frequency in MHz
*/
SYSCON_BM_VIDEO_ENC
};
+/* Selectr a resistor or a set of resistors */
+enum syscon_pull_up_down {
+ SYSCON_PU_KEY_IN_EN,
+ SYSCON_PU_EMIF_1_8_BIT_EN,
+ SYSCON_PU_EMIF_1_16_BIT_EN,
+ SYSCON_PU_EMIF_1_NFIF_READY_EN,
+ SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
+};
+
/*
* Note that this array must match the order of the array "clk_reg"
* in syscon.c
SYSCON_CLKCONTROL_SPI,
SYSCON_CLKCONTROL_I2S0_CORE,
SYSCON_CLKCONTROL_I2S1_CORE,
+ SYSCON_CLKCONTROL_UART1,
SYSCON_CLKCONTROL_AAIF,
SYSCON_CLKCONTROL_AHB,
SYSCON_CLKCONTROL_APEX,
enum syscon_sysclk_req {
SYSCON_SYSCLKREQ_DISABLED,
- SYSCON_SYSCLKREQ_ACTIVE_LOW
+ SYSCON_SYSCLKREQ_ACTIVE_LOW,
+ SYSCON_SYSCLKREQ_MONITOR
};
enum syscon_clk_mode {
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
+#include <linux/amba/mmci.h>
-#include <asm/mach/mmc.h>
#include "mmc.h"
+#include "padmux.h"
struct mmci_card_event {
struct input_dev *mmc_input;
int mmc_inserted;
struct work_struct workq;
- struct mmc_platform_data mmc0_plat_data;
+ struct mmci_platform_data mmc0_plat_data;
};
static unsigned int mmc_status(struct device *dev)
{
struct mmci_card_event *mmci_card;
struct device *mmcsd_device = &adev->dev;
+ struct pmx *pmx;
int ret = 0;
mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
mmci_card->mmc0_plat_data.status = mmc_status;
mmci_card->mmc0_plat_data.gpio_wp = -1;
mmci_card->mmc0_plat_data.gpio_cd = -1;
+ mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
input_set_drvdata(mmci_card->mmc_input, mmci_card);
+ /*
+ * Setup padmuxing for MMC. Since this must always be
+ * compiled into the kernel, pmx is never released.
+ */
+ pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
+
+ if (IS_ERR(pmx))
+ pr_warning("Could not get padmux handle\n");
+ else {
+ ret = pmx_activate(mmcsd_device, pmx);
+ if (IS_ERR_VALUE(ret))
+ pr_warning("Could not activate padmuxing\n");
+ }
+
ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
mmci_card);
* Copyright (C) 2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* U300 PADMUX functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
*/
-#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <mach/u300-regs.h>
#include <mach/syscon.h>
-
#include "padmux.h"
-/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
-void pmx_set_mission_mode_mmc(void)
-{
- u16 val;
-
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
- val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
- val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
- val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-}
-
-void pmx_set_mission_mode_spi(void)
-{
- u16 val;
-
- /* Set up padmuxing so the SPI port and its chipselects are active */
- val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
- /*
- * Activate the SPI port (disable the use of these pins for generic
- * GPIO, DSP, AAIF
- */
- val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
- val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
- /*
- * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
- * things also)
- */
- val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
- val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
- /*
- * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
- * things also)
- */
- val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
- val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
- writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+static DEFINE_MUTEX(pmx_mutex);
+
+const u32 pmx_registers[] = {
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
+ (U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
+};
+
+/* High level functionality */
+
+/* Lazy dog:
+ * onmask = {
+ * {"PMC1LR" mask, "PMC1LR" value},
+ * {"PMC1HR" mask, "PMC1HR" value},
+ * {"PMC2R" mask, "PMC2R" value},
+ * {"PMC3R" mask, "PMC3R" value},
+ * {"PMC4R" mask, "PMC4R" value}
+ * }
+ */
+static struct pmx mmc_setting = {
+ .setting = U300_APP_PMX_MMC_SETTING,
+ .default_on = false,
+ .activated = false,
+ .name = "MMC",
+ .onmask = {
+ {U300_SYSCON_PMC1LR_MMCSD_MASK,
+ U300_SYSCON_PMC1LR_MMCSD_MMCSD},
+ {0, 0},
+ {0, 0},
+ {0, 0},
+ {U300_SYSCON_PMC4R_APP_MISC_12_MASK,
+ U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
+ },
+};
+
+static struct pmx spi_setting = {
+ .setting = U300_APP_PMX_SPI_SETTING,
+ .default_on = false,
+ .activated = false,
+ .name = "SPI",
+ .onmask = {{0, 0},
+ {U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
+ U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
+ U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
+ U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
+ U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
+ U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
+ {0, 0},
+ {0, 0},
+ {0, 0}
+ },
+};
+
+/* Available padmux settings */
+static struct pmx *pmx_settings[] = {
+ &mmc_setting,
+ &spi_setting,
+};
+
+static void update_registers(struct pmx *pmx, bool activate)
+{
+ u16 regval, val, mask;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
+ if (activate)
+ val = pmx->onmask[i].val;
+ else
+ val = 0;
+
+ mask = pmx->onmask[i].mask;
+ if (mask != 0) {
+ regval = readw(pmx_registers[i]);
+ regval &= ~mask;
+ regval |= val;
+ writew(regval, pmx_registers[i]);
+ }
+ }
+}
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
+{
+ int i;
+ struct pmx *pmx = ERR_PTR(-ENOENT);
+
+ if (dev == NULL)
+ return ERR_PTR(-EINVAL);
+
+ mutex_lock(&pmx_mutex);
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (setting == pmx_settings[i]->setting) {
+
+ if (pmx_settings[i]->dev != NULL) {
+ WARN(1, "padmux: required setting "
+ "in use by another consumer\n");
+ } else {
+ pmx = pmx_settings[i];
+ pmx->dev = dev;
+ dev_dbg(dev, "padmux: setting nr %d is now "
+ "bound to %s and ready to use\n",
+ setting, dev_name(dev));
+ break;
+ }
+ }
+ }
+ mutex_unlock(&pmx_mutex);
+
+ return pmx;
+}
+EXPORT_SYMBOL(pmx_get);
+
+int pmx_put(struct device *dev, struct pmx *pmx)
+{
+ int i;
+ int ret = -ENOENT;
+
+ if (pmx == NULL || dev == NULL)
+ return -EINVAL;
+
+ mutex_lock(&pmx_mutex);
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (pmx->setting == pmx_settings[i]->setting) {
+
+ if (dev != pmx->dev) {
+ WARN(1, "padmux: cannot release handle as "
+ "it is bound to another consumer\n");
+ ret = -EINVAL;
+ break;
+ } else {
+ pmx_settings[i]->dev = NULL;
+ ret = 0;
+ break;
+ }
+ }
+ }
+ mutex_unlock(&pmx_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(pmx_put);
+
+int pmx_activate(struct device *dev, struct pmx *pmx)
+{
+ int i, j, ret;
+ ret = 0;
+
+ if (pmx == NULL || dev == NULL)
+ return -EINVAL;
+
+ mutex_lock(&pmx_mutex);
+
+ /* Make sure the required bits are not used */
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+ if (pmx_settings[i]->onmask[j].mask & pmx->
+ onmask[j].mask) {
+ /* More than one entry on the same bits */
+ WARN(1, "padmux: cannot activate "
+ "setting. Bit conflict with "
+ "an active setting\n");
+
+ ret = -EUSERS;
+ goto exit;
+ }
+ }
+ }
+ update_registers(pmx, true);
+ pmx->activated = true;
+ dev_dbg(dev, "padmux: setting nr %d is activated\n",
+ pmx->setting);
+
+exit:
+ mutex_unlock(&pmx_mutex);
+ return ret;
+}
+EXPORT_SYMBOL(pmx_activate);
+
+int pmx_deactivate(struct device *dev, struct pmx *pmx)
+{
+ int i;
+ int ret = -ENOENT;
+
+ if (pmx == NULL || dev == NULL)
+ return -EINVAL;
+
+ mutex_lock(&pmx_mutex);
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (pmx_settings[i]->dev == NULL)
+ continue;
+
+ if (pmx->setting == pmx_settings[i]->setting) {
+
+ if (dev != pmx->dev) {
+ WARN(1, "padmux: cannot deactivate "
+ "pmx setting as it was activated "
+ "by another consumer\n");
+
+ ret = -EBUSY;
+ continue;
+ } else {
+ update_registers(pmx, false);
+ pmx_settings[i]->dev = NULL;
+ pmx->activated = false;
+ ret = 0;
+ dev_dbg(dev, "padmux: setting nr %d is deactivated",
+ pmx->setting);
+ break;
+ }
+ }
+ }
+ mutex_unlock(&pmx_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL(pmx_deactivate);
+
+/*
+ * For internal use only. If it is to be exported,
+ * it should be reentrant. Notice that pmx_activate
+ * (i.e. runtime settings) always override default settings.
+ */
+static int pmx_set_default(void)
+{
+ /* Used to identify several entries on the same bits */
+ u16 modbits[ARRAY_SIZE(pmx_registers)];
+
+ int i, j;
+
+ memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
+
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+ if (!pmx_settings[i]->default_on)
+ continue;
+
+ for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+ /* Make sure there is only one entry on the same bits */
+ if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
+ BUG();
+ return -EUSERS;
+ }
+ modbits[j] |= pmx_settings[i]->onmask[j].mask;
+ }
+ update_registers(pmx_settings[i], true);
+ }
+ return 0;
}
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+static int pmx_show(struct seq_file *s, void *data)
+{
+ int i;
+ seq_printf(s, "-------------------------------------------------\n");
+ seq_printf(s, "SETTING BOUND TO DEVICE STATE\n");
+ seq_printf(s, "-------------------------------------------------\n");
+ mutex_lock(&pmx_mutex);
+ for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+ /* Format pmx and device name nicely */
+ char cdp[33];
+ int chars;
+
+ chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
+ while (chars < 16) {
+ cdp[chars] = ' ';
+ chars++;
+ }
+ chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
+ dev_name(pmx_settings[i]->dev) : "N/A");
+ while (chars < 16) {
+ cdp[chars+16] = ' ';
+ chars++;
+ }
+ cdp[32] = '\0';
+
+ seq_printf(s,
+ "%s\t%s\n",
+ &cdp[0],
+ pmx_settings[i]->activated ?
+ "ACTIVATED" : "DEACTIVATED"
+ );
+
+ }
+ mutex_unlock(&pmx_mutex);
+ return 0;
+}
+
+static int pmx_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, pmx_show, NULL);
+}
+
+static const struct file_operations pmx_operations = {
+ .owner = THIS_MODULE,
+ .open = pmx_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init init_pmx_read_debugfs(void)
+{
+ /* Expose a simple debugfs interface to view pmx settings */
+ (void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
+ NULL, NULL,
+ &pmx_operations);
+ return 0;
+}
+
+/*
+ * This needs to come in after the core_initcall(),
+ * because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_pmx_read_debugfs);
+#endif
+
+static int __init pmx_init(void)
+{
+ int ret;
+
+ ret = pmx_set_default();
+
+ if (IS_ERR_VALUE(ret))
+ pr_crit("padmux: default settings could not be set\n");
+
+ return 0;
+}
+
+/* Should be initialized before consumers */
+core_initcall(pmx_init);
* Copyright (C) 2009 ST-Ericsson AB
* License terms: GNU General Public License (GPL) version 2
* U300 PADMUX API
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
*/
#ifndef __MACH_U300_PADMUX_H
#define __MACH_U300_PADMUX_H
-void pmx_set_mission_mode_mmc(void);
-void pmx_set_mission_mode_spi(void);
+enum pmx_settings {
+ U300_APP_PMX_MMC_SETTING,
+ U300_APP_PMX_SPI_SETTING
+};
+
+struct pmx_onmask {
+ u16 mask; /* Mask bits */
+ u16 val; /* Value when active */
+};
+
+struct pmx {
+ struct device *dev;
+ enum pmx_settings setting;
+ char *name;
+ bool activated;
+ bool default_on;
+ struct pmx_onmask onmask[];
+};
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
+int pmx_put(struct device *dev, struct pmx *pmx);
+int pmx_activate(struct device *dev, struct pmx *pmx);
+int pmx_deactivate(struct device *dev, struct pmx *pmx);
#endif
--- /dev/null
+/*
+ * arch/arm/mach-u300/spi.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/spi/spi.h>
+#include <linux/amba/pl022.h>
+#include <linux/err.h>
+#include "padmux.h"
+
+/*
+ * The following is for the actual devices on the SSP/SPI bus
+ */
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+static void select_dummy_chip(u32 chipselect)
+{
+ pr_debug("CORE: %s called with CS=0x%x (%s)\n",
+ __func__,
+ chipselect,
+ chipselect ? "unselect chip" : "select chip");
+ /*
+ * Here you would write the chip select value to the GPIO pins if
+ * this was a real chip (but this is a loopback dummy).
+ */
+}
+
+struct pl022_config_chip dummy_chip_info = {
+ /* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */
+ .lbm = LOOPBACK_ENABLED,
+ /*
+ * available POLLING_TRANSFER and INTERRUPT_TRANSFER,
+ * DMA_TRANSFER does not work
+ */
+ .com_mode = INTERRUPT_TRANSFER,
+ .iface = SSP_INTERFACE_MOTOROLA_SPI,
+ /* We can only act as master but SSP_SLAVE is possible in theory */
+ .hierarchy = SSP_MASTER,
+ /* 0 = drive TX even as slave, 1 = do not drive TX as slave */
+ .slave_tx_disable = 0,
+ /* LSB first */
+ .endian_tx = SSP_TX_LSB,
+ .endian_rx = SSP_RX_LSB,
+ .data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
+ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+ .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+ .clk_phase = SSP_CLK_SECOND_EDGE,
+ .clk_pol = SSP_CLK_POL_IDLE_LOW,
+ .ctrl_len = SSP_BITS_12,
+ .wait_state = SSP_MWIRE_WAIT_ZERO,
+ .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+ /*
+ * This is where you insert a call to a function to enable CS
+ * (usually GPIO) for a certain chip.
+ */
+ .cs_control = select_dummy_chip,
+};
+#endif
+
+static struct spi_board_info u300_spi_devices[] = {
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+ {
+ /* A dummy chip used for loopback tests */
+ .modalias = "spi-dummy",
+ /* Really dummy, pass in additional chip config here */
+ .platform_data = NULL,
+ /* This defines how the controller shall handle the device */
+ .controller_data = &dummy_chip_info,
+ /* .irq - no external IRQ routed from this device */
+ .max_speed_hz = 1000000,
+ .bus_num = 0, /* Only one bus on this chip */
+ .chip_select = 0,
+ /* Means SPI_CS_HIGH, change if e.g low CS */
+ .mode = 0,
+ },
+#endif
+};
+
+static struct pl022_ssp_controller ssp_platform_data = {
+ /* If you have several SPI buses this varies, we have only bus 0 */
+ .bus_id = 0,
+ /* Set this to 1 when we think we got DMA working */
+ .enable_dma = 0,
+ /*
+ * On the APP CPU GPIO 4, 5 and 6 are connected as generic
+ * chip selects for SPI. (Same on U330, U335 and U365.)
+ * TODO: make sure the GPIO driver can select these properly
+ * and do padmuxing accordingly too.
+ */
+ .num_chipselect = 3,
+};
+
+
+void __init u300_spi_init(struct amba_device *adev)
+{
+ struct pmx *pmx;
+
+ adev->dev.platform_data = &ssp_platform_data;
+ /*
+ * Setup padmuxing for SPI. Since this must always be
+ * compiled into the kernel, pmx is never released.
+ */
+ pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
+
+ if (IS_ERR(pmx))
+ dev_warn(&adev->dev, "Could not get padmux handle\n");
+ else {
+ int ret;
+
+ ret = pmx_activate(&adev->dev, pmx);
+ if (IS_ERR_VALUE(ret))
+ dev_warn(&adev->dev, "Could not activate padmuxing\n");
+ }
+
+}
+void __init u300_spi_register_board_devices(void)
+{
+ /* Register any SPI devices */
+ spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
+}
--- /dev/null
+/*
+ * arch/arm/mach-u300/spi.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef SPI_H
+#define SPI_H
+#include <linux/amba/bus.h>
+
+#ifdef CONFIG_SPI_PL022
+void __init u300_spi_init(struct amba_device *adev);
+void __init u300_spi_register_board_devices(void);
+#else
+/* Compile out SPI support if PL022 is not selected */
+static inline void __init u300_spi_init(struct amba_device *adev)
+{
+}
+static inline void __init u300_spi_register_board_devices(void)
+{
+}
+#endif
+
+#endif
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
+ */
+unsigned long long notrace sched_clock(void)
+{
+ return clocksource_cyc2ns(clocksource_u300_1mhz.read(
+ &clocksource_u300_1mhz),
+ clocksource_u300_1mhz.mult,
+ clocksource_u300_1mhz.shift);
+}
+
/*
* This sets up the system timers, clock source and clock event.
#include <linux/amba/bus.h>
#include <linux/amba/clcd.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/cnt32_to_63.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
#include "core.h"
#include "clock.h"
return readl(VERSATILE_SYSMCI) & mask;
}
-static struct mmc_platform_data mmc0_plat_data = {
+static struct mmci_platform_data mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-#include <asm/mach/mmc.h>
#include "core.h"
#define IRQ_MMCI1A IRQ_SIC_MMCI1A
#endif
-static struct mmc_platform_data mmc1_plat_data = {
+static struct mmci_platform_data mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = mmc_status,
.gpio_wp = -1,
select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
help
The ARM610 is the successor to the ARM3 processor
and was produced by VLSI Technology Inc.
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4
help
A 32-bit RISC microprocessor based on the ARM7 processor core
select CPU_CP15_MMU
select CPU_COPY_V3 if MMU
select CPU_TLB_V3 if MMU
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
help
A 32-bit RISC microprocessor based on the ARM7 processor core
designed by Advanced RISC Machines Ltd. The ARM710 is the
bool "Support ARM720T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4
select CPU_CACHE_VIVT
select CPU_CP15_MMU
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V3 # although the core is v4t
select CPU_CP15_MPU
help
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4
help
A 32-bit RISC microprocessor based on the ARM9 processor core
bool "Support ARM920T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
- and is used in the Maverick EP9312 and the Samsung S3C2410.
-
- More information on the Maverick EP9312 at
- <http://linuxdevices.com/products/PD2382866068.html>.
+ and is used in the Cirrus EP93xx and the Samsung S3C2410.
Say Y if you want support for the ARM920T processor.
Otherwise, say N.
bool "Support ARM922T processor" if ARCH_INTEGRATOR
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
bool "Support ARM925T processor" if ARCH_OMAP1
select CPU_32v4T
select CPU_ABRT_EV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
select CPU_32v5
select CPU_ABRT_EV5TJ
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU
bool
select CPU_32v4
select CPU_ABRT_EV4
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_CACHE_FA
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
help
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MPU
help
bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
bool "Support ARM1020E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4WT
select CPU_CACHE_VIVT
select CPU_CP15_MMU
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV4T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_V4WB if MMU # can probably do better
select CPU_32v3 if ARCH_RPC
select CPU_32v4 if !ARCH_RPC
select CPU_ABRT_EV4
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
bool
select CPU_32v4
select CPU_ABRT_EV4
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_V4WB
select CPU_CACHE_VIVT
select CPU_CP15_MMU
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_TLB_V4WBI if MMU
bool
select CPU_32v5
select CPU_ABRT_EV5T
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_LEGACY
select CPU_CACHE_VIVT
select CPU_CP15_MMU
select CPU_COPY_FEROCEON if MMU
bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
- select CPU_PABRT_NOIFAR
+ select CPU_PABRT_V6
select CPU_CACHE_V6
select CPU_CACHE_VIPT
select CPU_CP15_MMU
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
- select CPU_PABRT_IFAR
+ select CPU_PABRT_V7
select CPU_CACHE_V7
select CPU_CACHE_VIPT
select CPU_CP15_MMU
config CPU_ABRT_EV7
bool
-config CPU_PABRT_IFAR
+config CPU_PABRT_LEGACY
+ bool
+
+config CPU_PABRT_V6
bool
-config CPU_PABRT_NOIFAR
+config CPU_PABRT_V7
bool
# The cache model
select OUTER_CACHE
help
This option enables the L2 cache on XScale3.
+
+config ARM_L1_CACHE_SHIFT
+ int
+ default 6 if ARCH_OMAP3
+ default 5
obj-$(CONFIG_CPU_ABRT_EV6) += abort-ev6.o
obj-$(CONFIG_CPU_ABRT_EV7) += abort-ev7.o
+obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o
+obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
+obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
+
obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o
obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o
obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/unwind.h>
#include "proc-macros.S"
* - the Icache does not read data from the write buffer
*/
ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart )
#ifdef HARVARD_CACHE
bic r0, r0, #CACHE_LINE_SIZE - 1
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D line
+1:
+ USER( mcr p15, 0, r0, c7, c10, 1 ) @ clean D line
add r0, r0, #CACHE_LINE_SIZE
+2:
cmp r0, r1
blo 1b
#endif
#endif
mov pc, lr
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+ mov r0, r0, lsr #12
+ mov r0, r0, lsl #12
+ add r0, r0, #4096
+ b 2b
+ UNWIND(.fnend )
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
/*
* v6_flush_kern_dcache_page(kaddr)
*
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/unwind.h>
#include "proc-macros.S"
* - the Icache does not read data from the write buffer
*/
ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
-1: mcr p15, 0, r0, c7, c11, 1 @ clean D line to the point of unification
+1:
+ USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
dsb
- mcr p15, 0, r0, c7, c5, 1 @ invalidate I line
+ USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
add r0, r0, r2
+2:
cmp r0, r1
blo 1b
mov r0, #0
dsb
isb
mov pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+ mov r0, r0, lsr #12
+ mov r0, r0, lsl #12
+ add r0, r0, #4096
+ b 2b
+ UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
isb();
flush_tlb_all();
if (icache_is_vivt_asid_tagged()) {
- asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n"
- "mcr p15, 0, %0, c7, c5, 6 @ flush BTAC/BTB\n"
- :
- : "r" (0));
+ __flush_icache_all();
dsb();
}
}
spin_unlock(&cpu_asid_lock);
- mm->cpu_vm_mask = cpumask_of_cpu(smp_processor_id());
+ cpumask_copy(mm_cpumask(mm), cpumask_of(smp_processor_id()));
mm->context.id = asid;
}
order = get_order(size);
- if (mask != 0xffffffff)
+ if (mask < 0xffffffffULL)
gfp |= GFP_DMA;
page = alloc_pages(gfp, order);
if (!mask)
goto error;
- if (mask != 0xffffffff)
+ if (mask < 0xffffffffULL)
gfp |= GFP_DMA;
virt = kmalloc(size, gfp);
if (!virt)
page = pfn_to_page(pfn);
mapping = page_mapping(page);
- if (mapping) {
#ifndef CONFIG_SMP
- int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
- if (dirty)
- __flush_dcache_page(mapping, page);
+ if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+ __flush_dcache_page(mapping, page);
#endif
-
+ if (mapping) {
if (cache_is_vivt())
make_coherent(mapping, vma, addr, pfn);
else if (vma->vm_flags & VM_EXEC)
#include "fault.h"
+/*
+ * Fault status register encodings. We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF (1 << 31)
+#define FSR_WRITE (1 << 11)
+#define FSR_FS4 (1 << 10)
+#define FSR_FS3_0 (15)
+
+static inline int fsr_fs(unsigned int fsr)
+{
+ return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+
#ifdef CONFIG_MMU
#ifdef CONFIG_KPROBES
#define VM_FAULT_BADMAP 0x010000
#define VM_FAULT_BADACCESS 0x020000
-static int
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
+{
+ unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+ if (fsr & FSR_WRITE)
+ mask = VM_WRITE;
+ if (fsr & FSR_LNX_PF)
+ mask = VM_EXEC;
+
+ return vma->vm_flags & mask ? false : true;
+}
+
+static int __kprobes
__do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
struct task_struct *tsk)
{
struct vm_area_struct *vma;
- int fault, mask;
+ int fault;
vma = find_vma(mm, addr);
fault = VM_FAULT_BADMAP;
- if (!vma)
+ if (unlikely(!vma))
goto out;
- if (vma->vm_start > addr)
+ if (unlikely(vma->vm_start > addr))
goto check_stack;
/*
* memory access, so we can handle it.
*/
good_area:
- if (fsr & (1 << 11)) /* write? */
- mask = VM_WRITE;
- else
- mask = VM_READ|VM_EXEC|VM_WRITE;
-
- fault = VM_FAULT_BADACCESS;
- if (!(vma->vm_flags & mask))
+ if (access_error(fsr, vma)) {
+ fault = VM_FAULT_BADACCESS;
goto out;
+ }
/*
- * If for any reason at all we couldn't handle
- * the fault, make sure we exit gracefully rather
- * than endlessly redo the fault.
+ * If for any reason at all we couldn't handle the fault, make
+ * sure we exit gracefully rather than endlessly redo the fault.
*/
-survive:
- fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0);
- if (unlikely(fault & VM_FAULT_ERROR)) {
- if (fault & VM_FAULT_OOM)
- goto out_of_memory;
- else if (fault & VM_FAULT_SIGBUS)
- return fault;
- BUG();
- }
+ fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
+ if (unlikely(fault & VM_FAULT_ERROR))
+ return fault;
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
return fault;
-out_of_memory:
- if (!is_global_init(tsk))
- goto out;
-
- /*
- * If we are out of memory for pid1, sleep for a while and retry
- */
- up_read(&mm->mmap_sem);
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
-
check_stack:
if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
goto good_area;
if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
goto no_context;
down_read(&mm->mmap_sem);
+ } else {
+ /*
+ * The above down_read_trylock() might have succeeded in
+ * which case, we'll have missed the might_sleep() from
+ * down_read()
+ */
+ might_sleep();
+#ifdef CONFIG_DEBUG_VM
+ if (!user_mode(regs) &&
+ !search_exception_tables(regs->ARM_pc))
+ goto no_context;
+#endif
}
fault = __do_page_fault(mm, addr, fsr, tsk);
if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
return 0;
+ if (fault & VM_FAULT_OOM) {
+ /*
+ * We ran out of memory, call the OOM killer, and return to
+ * userspace (which will retry the fault, or kill us if we
+ * got oom-killed)
+ */
+ pagefault_out_of_memory();
+ return 0;
+ }
+
/*
* If we are in kernel mode at this point, we
* have no context to handle this fault with.
if (!user_mode(regs))
goto no_context;
- if (fault & VM_FAULT_OOM) {
- /*
- * We ran out of memory, or some other thing
- * happened to us that made us unable to handle
- * the page fault gracefully.
- */
- printk("VM: killing process %s\n", tsk->comm);
- do_group_exit(SIGKILL);
- return 0;
- }
if (fault & VM_FAULT_SIGBUS) {
/*
* We had some memory, but were unable to
asmlinkage void __exception
do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
{
- const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
+ const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
struct siginfo info;
- if (!inf->fn(addr, fsr, regs))
+ if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
return;
printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
arm_notify_die("", regs, &info, fsr, 0);
}
+
+static struct fsr_info ifsr_info[] = {
+ { do_bad, SIGBUS, 0, "unknown 0" },
+ { do_bad, SIGBUS, 0, "unknown 1" },
+ { do_bad, SIGBUS, 0, "debug event" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "section access flag fault" },
+ { do_bad, SIGBUS, 0, "unknown 4" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "section translation fault" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "page access flag fault" },
+ { do_page_fault, SIGSEGV, SEGV_MAPERR, "page translation fault" },
+ { do_bad, SIGBUS, 0, "external abort on non-linefetch" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "section domain fault" },
+ { do_bad, SIGBUS, 0, "unknown 10" },
+ { do_bad, SIGSEGV, SEGV_ACCERR, "page domain fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_sect_fault, SIGSEGV, SEGV_ACCERR, "section permission fault" },
+ { do_bad, SIGBUS, 0, "external abort on translation" },
+ { do_page_fault, SIGSEGV, SEGV_ACCERR, "page permission fault" },
+ { do_bad, SIGBUS, 0, "unknown 16" },
+ { do_bad, SIGBUS, 0, "unknown 17" },
+ { do_bad, SIGBUS, 0, "unknown 18" },
+ { do_bad, SIGBUS, 0, "unknown 19" },
+ { do_bad, SIGBUS, 0, "unknown 20" },
+ { do_bad, SIGBUS, 0, "unknown 21" },
+ { do_bad, SIGBUS, 0, "unknown 22" },
+ { do_bad, SIGBUS, 0, "unknown 23" },
+ { do_bad, SIGBUS, 0, "unknown 24" },
+ { do_bad, SIGBUS, 0, "unknown 25" },
+ { do_bad, SIGBUS, 0, "unknown 26" },
+ { do_bad, SIGBUS, 0, "unknown 27" },
+ { do_bad, SIGBUS, 0, "unknown 28" },
+ { do_bad, SIGBUS, 0, "unknown 29" },
+ { do_bad, SIGBUS, 0, "unknown 30" },
+ { do_bad, SIGBUS, 0, "unknown 31" },
+};
+
asmlinkage void __exception
-do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
+do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
{
- do_translation_fault(addr, 0, regs);
+ const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);
+ struct siginfo info;
+
+ if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
+ return;
+
+ printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
+ inf->name, ifsr, addr);
+
+ info.si_signo = inf->sig;
+ info.si_errno = 0;
+ info.si_code = inf->code;
+ info.si_addr = (void __user *)addr;
+ arm_notify_die("", regs, &info, ifsr, 0);
}
#include "mm.h"
-#ifdef CONFIG_ARM_ERRATA_411920
-extern void v6_icache_inval_all(void);
-#endif
-
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
flush_tlb_kernel_page(to);
asm( "mcrr p15, 0, %1, %0, c14\n"
- " mcr p15, 0, %2, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
- " mcr p15, 0, %2, c7, c5, 0\n"
-#endif
+ " mcr p15, 0, %2, c7, c10, 4"
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
- v6_icache_inval_all();
-#endif
+ __flush_icache_all();
}
void flush_cache_mm(struct mm_struct *mm)
{
if (cache_is_vivt()) {
- if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask))
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
__cpuc_flush_user_all();
return;
}
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
- " mcr p15, 0, %0, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
- " mcr p15, 0, %0, c7, c5, 0\n"
-#endif
+ " mcr p15, 0, %0, c7, c10, 4"
:
: "r" (0)
: "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
- v6_icache_inval_all();
-#endif
+ __flush_icache_all();
}
}
void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
{
if (cache_is_vivt()) {
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask))
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
vma->vm_flags);
return;
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
- " mcr p15, 0, %0, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
- " mcr p15, 0, %0, c7, c5, 0\n"
-#endif
+ " mcr p15, 0, %0, c7, c10, 4"
:
: "r" (0)
: "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
- v6_icache_inval_all();
-#endif
+ __flush_icache_all();
}
}
void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
{
if (cache_is_vivt()) {
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = user_addr & PAGE_MASK;
__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
}
unsigned long len, int write)
{
if (cache_is_vivt()) {
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
unsigned long addr = (unsigned long)kaddr;
__cpuc_coherent_kern_range(addr, addr + len);
}
}
/* VIPT non-aliasing cache */
- if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
+ if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)) &&
vma->vm_flags & VM_EXEC) {
unsigned long addr = (unsigned long)kaddr;
/* only flushing the kernel mapping on non-aliasing VIPT */
if (!PageHighMem(page))
return page_address(page);
+ debug_kmap_atomic(type);
+
kmap = kmap_high_get(page);
if (kmap)
return kmap;
struct membank *bank = &mi->bank[i];
if (!bank->highmem)
free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
- memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
}
/*
return 0;
}
EXPORT_SYMBOL(pfn_valid);
+
+static void arm_memory_present(struct meminfo *mi, int node)
+{
+}
+#else
+static void arm_memory_present(struct meminfo *mi, int node)
+{
+ int i;
+ for_each_nodebank(i, mi, node) {
+ struct membank *bank = &mi->bank[i];
+ memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
+ }
+}
#endif
static int __init meminfo_cmp(const void *_a, const void *_b)
*/
if (node == initrd_node)
bootmem_reserve_initrd(node);
+
+ /*
+ * Sparsemem tries to allocate bootmem in memory_present(),
+ * so must be done after the fixed reservations
+ */
+ arm_memory_present(mi, node);
}
/*
/*
* Convert start_pfn/end_pfn to a struct page pointer.
*/
- start_pg = pfn_to_page(start_pfn);
+ start_pg = pfn_to_page(start_pfn - 1) + 1;
end_pg = pfn_to_page(end_pfn);
/*
void free_initmem(void)
{
+#ifdef CONFIG_HAVE_TCM
+ extern char *__tcm_start, *__tcm_end;
+
+ totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
+ __phys_to_pfn(__pa(__tcm_end)),
+ "TCM link");
+#endif
+
if (!machine_is_integrator() && !machine_is_cintegrator())
totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
__phys_to_pfn(__pa(__init_end)),
{
if (addr < PHYS_OFFSET)
return 0;
- if (addr + size >= __pa(high_memory - 1))
+ if (addr + size > __pa(high_memory - 1) + 1)
return 0;
return 1;
#include <asm/cachetype.h>
#include <asm/setup.h>
#include <asm/sizes.h>
+#include <asm/smp_plat.h>
#include <asm/tlb.h>
#include <asm/highmem.h>
}
if (i == ARRAY_SIZE(cache_policies))
printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
+ /*
+ * This restriction is partly to do with the way we boot; it is
+ * unpredictable to have memory mapped using two different sets of
+ * memory attributes (shared, type, and cache attribs). We can not
+ * change these attributes once the initial assembly has setup the
+ * page tables.
+ */
if (cpu_architecture() >= CPU_ARCH_ARMv6) {
printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
cachepolicy = CPOLICY_WRITEBACK;
if (meminfo.nr_banks >= NR_BANKS) {
printk(KERN_CRIT "NR_BANKS too low, "
"ignoring high memory\n");
- } else if (cache_is_vipt_aliasing()) {
- printk(KERN_CRIT "HIGHMEM is not yet supported "
- "with VIPT aliasing cache, "
- "ignoring high memory\n");
} else {
memmove(bank + 1, bank,
(meminfo.nr_banks - i) * sizeof(*bank));
bank->size = VMALLOC_MIN - __va(bank->start);
}
#else
+ bank->highmem = highmem;
+
/*
* Check whether this memory bank would entirely overlap
* the vmalloc area.
#endif
j++;
}
+#ifdef CONFIG_HIGHMEM
+ if (highmem) {
+ const char *reason = NULL;
+
+ if (cache_is_vipt_aliasing()) {
+ /*
+ * Interactions between kmap and other mappings
+ * make highmem support with aliasing VIPT caches
+ * rather difficult.
+ */
+ reason = "with VIPT aliasing cache";
+#ifdef CONFIG_SMP
+ } else if (tlb_ops_need_broadcast()) {
+ /*
+ * kmap_high needs to occasionally flush TLB entries,
+ * however, if the TLB entries need to be broadcast
+ * we may deadlock:
+ * kmap_high(irqs off)->flush_all_zero_pkmaps->
+ * flush_tlb_kernel_range->smp_call_function_many
+ * (must not be called with irqs off)
+ */
+ reason = "without hardware TLB ops broadcasting";
+#endif
+ }
+ if (reason) {
+ printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
+ reason);
+ while (j > 0 && meminfo.bank[j - 1].highmem)
+ j--;
+ }
+ }
+#endif
meminfo.nr_banks = j;
}
--- /dev/null
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: legacy_pabort
+ *
+ * Params : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ * : r1 = Simulated IFSR with section translation fault status
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+ .align 5
+ENTRY(legacy_pabort)
+ mov r1, #5
+ mov pc, lr
+ENDPROC(legacy_pabort)
--- /dev/null
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ * : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+ .align 5
+ENTRY(v6_pabort)
+ mrc p15, 0, r1, c5, c0, 1 @ get IFSR
+ mov pc, lr
+ENDPROC(v6_pabort)
--- /dev/null
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ * : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+ .align 5
+ENTRY(v7_pabort)
+ mrc p15, 0, r0, c6, c0, 2 @ get IFAR
+ mrc p15, 0, r1, c5, c0, 1 @ get IFSR
+ mov pc, lr
+ENDPROC(v7_pabort)
.type arm1020_processor_functions, #object
arm1020_processor_functions:
.word v4t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm1020_proc_init
.word cpu_arm1020_proc_fin
.word cpu_arm1020_reset
.type arm1020e_processor_functions, #object
arm1020e_processor_functions:
.word v4t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm1020e_proc_init
.word cpu_arm1020e_proc_fin
.word cpu_arm1020e_reset
.type arm1022_processor_functions, #object
arm1022_processor_functions:
.word v4t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm1022_proc_init
.word cpu_arm1022_proc_fin
.word cpu_arm1022_reset
.type arm1026_processor_functions, #object
arm1026_processor_functions:
.word v5t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm1026_proc_init
.word cpu_arm1026_proc_fin
.word cpu_arm1026_reset
.type arm6_processor_functions, #object
ENTRY(arm6_processor_functions)
.word cpu_arm6_data_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm6_proc_init
.word cpu_arm6_proc_fin
.word cpu_arm6_reset
.type arm7_processor_functions, #object
ENTRY(arm7_processor_functions)
.word cpu_arm7_data_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm7_proc_init
.word cpu_arm7_proc_fin
.word cpu_arm7_reset
.type arm720_processor_functions, #object
ENTRY(arm720_processor_functions)
.word v4t_late_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm720_proc_init
.word cpu_arm720_proc_fin
.word cpu_arm720_reset
.type arm740_processor_functions, #object
ENTRY(arm740_processor_functions)
.word v4t_late_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm740_proc_init
.word cpu_arm740_proc_fin
.word cpu_arm740_reset
.type arm7tdmi_processor_functions, #object
ENTRY(arm7tdmi_processor_functions)
.word v4t_late_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm7tdmi_proc_init
.word cpu_arm7tdmi_proc_fin
.word cpu_arm7tdmi_reset
.type arm920_processor_functions, #object
arm920_processor_functions:
.word v4t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm920_proc_init
.word cpu_arm920_proc_fin
.word cpu_arm920_reset
.type arm922_processor_functions, #object
arm922_processor_functions:
.word v4t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm922_proc_init
.word cpu_arm922_proc_fin
.word cpu_arm922_reset
.type arm925_processor_functions, #object
arm925_processor_functions:
.word v4t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm925_proc_init
.word cpu_arm925_proc_fin
.word cpu_arm925_reset
.type arm926_processor_functions, #object
arm926_processor_functions:
.word v5tj_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm926_proc_init
.word cpu_arm926_proc_fin
.word cpu_arm926_reset
.type arm940_processor_functions, #object
ENTRY(arm940_processor_functions)
.word nommu_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm940_proc_init
.word cpu_arm940_proc_fin
.word cpu_arm940_reset
.type arm946_processor_functions, #object
ENTRY(arm946_processor_functions)
.word nommu_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm946_proc_init
.word cpu_arm946_proc_fin
.word cpu_arm946_reset
.type arm9tdmi_processor_functions, #object
ENTRY(arm9tdmi_processor_functions)
.word nommu_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_arm9tdmi_proc_init
.word cpu_arm9tdmi_proc_fin
.word cpu_arm9tdmi_reset
.type fa526_processor_functions, #object
fa526_processor_functions:
.word v4_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_fa526_proc_init
.word cpu_fa526_proc_fin
.word cpu_fa526_reset
.type feroceon_processor_functions, #object
feroceon_processor_functions:
.word v5t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_feroceon_proc_init
.word cpu_feroceon_proc_fin
.word cpu_feroceon_reset
.type mohawk_processor_functions, #object
mohawk_processor_functions:
.word v5t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_mohawk_proc_init
.word cpu_mohawk_proc_fin
.word cpu_mohawk_reset
.type sa110_processor_functions, #object
ENTRY(sa110_processor_functions)
.word v4_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_sa110_proc_init
.word cpu_sa110_proc_fin
.word cpu_sa110_reset
.type sa1100_processor_functions, #object
ENTRY(sa1100_processor_functions)
.word v4_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_sa1100_proc_init
.word cpu_sa1100_proc_fin
.word cpu_sa1100_reset
#ifndef CONFIG_SMP
#define TTB_FLAGS TTB_RGN_WBWA
+#define PMD_FLAGS PMD_SECT_WB
#else
#define TTB_FLAGS TTB_RGN_WBWA|TTB_S
+#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S
#endif
ENTRY(cpu_v6_proc_init)
.type v6_processor_functions, #object
ENTRY(v6_processor_functions)
.word v6_early_abort
- .word pabort_noifar
+ .word v6_pabort
.word cpu_v6_proc_init
.word cpu_v6_proc_fin
.word cpu_v6_reset
.long 0x0007b000
.long 0x0007f000
.long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
+ PMD_SECT_AP_READ | \
+ PMD_FLAGS
.long PMD_TYPE_SECT | \
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
#ifndef CONFIG_SMP
/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS PMD_SECT_WB
#else
/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS PMD_SECT_WBWA|PMD_SECT_S
#endif
ENTRY(cpu_v7_proc_init)
.type v7_processor_functions, #object
ENTRY(v7_processor_functions)
.word v7_early_abort
- .word pabort_ifar
+ .word v7_pabort
.word cpu_v7_proc_init
.word cpu_v7_proc_fin
.word cpu_v7_reset
.long 0x000f0000 @ Required ID value
.long 0x000f0000 @ Mask for ID
.long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
+ PMD_SECT_AP_READ | \
+ PMD_FLAGS
.long PMD_TYPE_SECT | \
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
.type xsc3_processor_functions, #object
ENTRY(xsc3_processor_functions)
.word v5t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_xsc3_proc_init
.word cpu_xsc3_proc_fin
.word cpu_xsc3_reset
.type xscale_processor_functions, #object
ENTRY(xscale_processor_functions)
.word v5t_early_abort
- .word pabort_noifar
+ .word legacy_pabort
.word cpu_xscale_proc_init
.word cpu_xscale_proc_fin
.word cpu_xscale_reset
#ifdef CONFIG_ARCH_OMAP2
3,
#endif
+#ifdef CONFIG_ARCH_BCMRING
+ IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
};
static void armv6_pmu_stop(void)
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
#else
dma_cap_set(DMA_MEMCPY, iop3xx_dma_0_data.cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_0_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_0_data.cap_mask);
#endif
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
#else
dma_cap_set(DMA_MEMCPY, iop3xx_dma_1_data.cap_mask);
- dma_cap_set(DMA_MEMCPY_CRC32C, iop3xx_dma_1_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_dma_1_data.cap_mask);
#endif
dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
#else
dma_cap_set(DMA_XOR, iop3xx_aau_data.cap_mask);
- dma_cap_set(DMA_ZERO_SUM, iop3xx_aau_data.cap_mask);
+ dma_cap_set(DMA_XOR_VAL, iop3xx_aau_data.cap_mask);
dma_cap_set(DMA_MEMSET, iop3xx_aau_data.cap_mask);
dma_cap_set(DMA_INTERRUPT, iop3xx_aau_data.cap_mask);
#endif
*IOP3XX_OUMWTVR0 = 0;
/* Outbound window 1 */
- *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE;
+ *IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
+ IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
*IOP3XX_OUMWTVR1 = 0;
/* BAR 3 ( Disabled ) */
{
u32 timer_ctl;
- ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+ ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
ticks_per_usec = tick_rate / 1000000;
next_jiffy_time = 0xffffffff;
iop_tick_rate = tick_rate;
*
* @param arb_rate
* @param max_fifo_depth
- * @param tparams - Number of thereads to reserve : DMA_THREAD_RESERVE_NORM
- * DMA_THREAD_RESERVE_ONET
- * DMA_THREAD_RESERVE_TWOT
- * DMA_THREAD_RESERVE_THREET
+ * @param tparams - Number of threads to reserve : DMA_THREAD_RESERVE_NORM
+ * DMA_THREAD_RESERVE_ONET
+ * DMA_THREAD_RESERVE_TWOT
+ * DMA_THREAD_RESERVE_THREET
*/
void
omap_dma_set_global_params(int arb_rate, int max_fifo_depth, int tparams)
return;
}
+ if (max_fifo_depth == 0)
+ max_fifo_depth = 1;
if (arb_rate == 0)
arb_rate = 1;
- reg = (arb_rate & 0xff) << 16;
- reg |= (0xff & max_fifo_depth);
+ reg = 0xff & max_fifo_depth;
+ reg |= (0x3 & tparams) << 12;
+ reg |= (arb_rate & 0xff) << 16;
dma_write(reg, GCR);
}
{
u32 l;
+ /* Disable all interrupts on the channel */
+ if (cpu_class_is_omap1())
+ dma_write(0, CICR(lch));
+
+ l = dma_read(CCR(lch));
+ l &= ~OMAP_DMA_CCR_EN;
+ dma_write(l, CCR(lch));
+
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch = lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
next_lch = dma_chan[cur_lch].next_lch;
cur_lch = next_lch;
} while (next_lch != -1);
-
- return;
}
- /* Disable all interrupts on the channel */
- if (cpu_class_is_omap1())
- dma_write(0, CICR(lch));
-
- l = dma_read(CCR(lch));
- l &= ~OMAP_DMA_CCR_EN;
- dma_write(l, CCR(lch));
-
dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
}
EXPORT_SYMBOL(omap_stop_dma);
#ifdef CONFIG_ARCH_OMAP850
static struct gpio_bank gpio_bank_850[7] = {
- { OMAP1_MPUIO_BASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
+ { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO },
{ OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 },
{ OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 },
{ OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 },
#define cpu_is_omap2430() 0
#define cpu_is_omap3430() 0
-#if defined(MULTI_OMAP1)
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() is_omap730()
-# endif
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap850
-# define cpu_is_omap850() is_omap850()
-# endif
-#else
-# if defined(CONFIG_ARCH_OMAP730)
-# undef cpu_is_omap730
-# define cpu_is_omap730() 1
-# endif
-#endif
-#else
-# if defined(CONFIG_ARCH_OMAP850)
-# undef cpu_is_omap850
-# define cpu_is_omap850() 1
-# endif
-#endif
-
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
- * between 330 vs. 1510 and 1611B/5912 vs. 1710.
+ * between 730 vs 850, 330 vs. 1510 and 1611B/5912 vs. 1710.
*/
+
+#if defined(CONFIG_ARCH_OMAP730)
+# undef cpu_is_omap730
+# define cpu_is_omap730() is_omap730()
+#endif
+
+#if defined(CONFIG_ARCH_OMAP850)
+# undef cpu_is_omap850
+# define cpu_is_omap850() is_omap850()
+#endif
+
#if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap310
# undef cpu_is_omap1510
int omap_chip_is(struct omap_chip_id oci);
void omap2_check_revision(void);
+
+#endif
#ifndef ASMARM_ARCH_KEYPAD_H
#define ASMARM_ARCH_KEYPAD_H
+#warning: Please update the board to use matrix_keypad.h instead
+
struct omap_kp_platform_data {
int rows;
int cols;
*/
AF26_34XX_GPIO0,
AF22_34XX_GPIO9,
+ AG9_34XX_GPIO23,
AH8_34XX_GPIO29,
U8_34XX_GPIO54_OUT,
U8_34XX_GPIO54_DOWN,
L8_34XX_GPIO63,
G25_34XX_GPIO86_OUT,
AG4_34XX_GPIO134_OUT,
+ AF4_34XX_GPIO135_OUT,
AE4_34XX_GPIO136_OUT,
AF6_34XX_GPIO140_UP,
AE6_34XX_GPIO141,
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user);
+int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
+ void *user);
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
nent = 1; /* for the next L1 entry */
} else {
bytes = IOPGD_SIZE;
- if (*iopgd & IOPGD_SUPER) {
+ if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
nent *= 16;
/* rewind to the 1st entry */
iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
* 'va': mpu virtual address
*
* 'c': contiguous memory area
- * 'd': dicontiguous memory area
+ * 'd': discontiguous memory area
* 'a': anonymous memory allocation
* '()': optional feature
*
va += bytes;
}
- flush_cache_vmap(new->addr, new->addr + total);
+ flush_cache_vmap((unsigned long)new->addr,
+ (unsigned long)(new->addr + total));
return new->addr;
err_out:
goto out;
}
va = area->va;
- mutex_unlock(&obj->mmap_lock);
out:
+ mutex_unlock(&obj->mmap_lock);
+
return va;
}
EXPORT_SYMBOL_GPL(da_to_va);
}
va_end = _va + PAGE_SIZE * i;
- flush_cache_vmap(_va, va_end);
+ flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
}
static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
{
/*
* Actually this is not necessary at all, just exists for
- * consistency of the code readibility.
+ * consistency of the code readability.
*/
BUG_ON(!sgt);
}
{
/*
* Actually this is not necessary at all, just exists for
- * consistency of the code readibility
+ * consistency of the code readability
*/
BUG_ON(!sgt);
}
rx &= 1;
if (cpu_is_omap2430() || cpu_is_omap34xx()) {
w = OMAP_MCBSP_READ(io_base, RCCR);
- w |= (tx ? RDISABLE : 0);
+ w |= (rx ? RDISABLE : 0);
OMAP_MCBSP_WRITE(io_base, RCCR, w);
}
w = OMAP_MCBSP_READ(io_base, SPCR1);
omap_sram_ceil -= size;
omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, sizeof(void *));
memcpy((void *)omap_sram_ceil, start, size);
- flush_icache_range((unsigned long)start, (unsigned long)(start + size));
+ flush_icache_range((unsigned long)omap_sram_ceil,
+ (unsigned long)(omap_sram_ceil + size));
return (void *)omap_sram_ceil;
}
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
+#include <linux/dma-mapping.h>
#include <asm/system.h>
#include <asm/irq.h>
+#include <asm/memory.h>
#include <mach/hardware.h>
#include <mach/dma.h>
+#define DMA_DEBUG_NAME "pxa_dma"
+#define DMA_MAX_REQUESTERS 64
+
struct dma_channel {
char *name;
pxa_dma_prio prio;
void (*irq_handler)(int, void *);
void *data;
+ spinlock_t lock;
};
static struct dma_channel *dma_channels;
static int num_dma_channels;
+/*
+ * Debug fs
+ */
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
+
+static int dbg_show_requester_chan(struct seq_file *s, void *p)
+{
+ int pos = 0;
+ int chan = (int)s->private;
+ int i;
+ u32 drcmr;
+
+ pos += seq_printf(s, "DMA channel %d requesters list :\n", chan);
+ for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
+ drcmr = DRCMR(i);
+ if ((drcmr & DRCMR_CHLNUM) == chan)
+ pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i,
+ !!(drcmr & DRCMR_MAPVLD));
+ }
+ return pos;
+}
+
+static inline int dbg_burst_from_dcmd(u32 dcmd)
+{
+ int burst = (dcmd >> 16) & 0x3;
+
+ return burst ? 4 << burst : 0;
+}
+
+static int is_phys_valid(unsigned long addr)
+{
+ return pfn_valid(__phys_to_pfn(addr));
+}
+
+#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
+#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
+
+static int dbg_show_descriptors(struct seq_file *s, void *p)
+{
+ int pos = 0;
+ int chan = (int)s->private;
+ int i, max_show = 20, burst, width;
+ u32 dcmd;
+ unsigned long phys_desc;
+ struct pxa_dma_desc *desc;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dma_channels[chan].lock, flags);
+ phys_desc = DDADR(chan);
+
+ pos += seq_printf(s, "DMA channel %d descriptors :\n", chan);
+ pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0);
+ for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
+ desc = phys_to_virt(phys_desc);
+ dcmd = desc->dcmd;
+ burst = dbg_burst_from_dcmd(dcmd);
+ width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+ pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
+ i, phys_desc, desc);
+ pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
+ pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
+ pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
+ pos += seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d"
+ " width=%d len=%d)\n",
+ dcmd,
+ DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+ DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+ DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+ DCMD_STR(ENDIAN), burst, width,
+ dcmd & DCMD_LENGTH);
+ phys_desc = desc->ddadr;
+ }
+ if (i == max_show)
+ pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
+ i, phys_desc);
+ else
+ pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n",
+ i, phys_desc, phys_desc == DDADR_STOP ?
+ "DDADR_STOP" : "invalid");
+
+ spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
+ return pos;
+}
+
+static int dbg_show_chan_state(struct seq_file *s, void *p)
+{
+ int pos = 0;
+ int chan = (int)s->private;
+ u32 dcsr, dcmd;
+ int burst, width;
+ static char *str_prio[] = { "high", "normal", "low" };
+
+ dcsr = DCSR(chan);
+ dcmd = DCMD(chan);
+ burst = dbg_burst_from_dcmd(dcmd);
+ width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+ pos += seq_printf(s, "DMA channel %d\n", chan);
+ pos += seq_printf(s, "\tPriority : %s\n",
+ str_prio[dma_channels[chan].prio]);
+ pos += seq_printf(s, "\tUnaligned transfer bit: %s\n",
+ DALGN & (1 << chan) ? "yes" : "no");
+ pos += seq_printf(s, "\tDCSR = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
+ dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
+ DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
+ DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
+ DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
+ DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
+ DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
+ DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
+
+ pos += seq_printf(s, "\tDCMD = %08x (%s%s%s%s%s%s%sburst=%d width=%d"
+ " len=%d)\n",
+ dcmd,
+ DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+ DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+ DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+ DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
+ pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
+ pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
+ pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
+ return pos;
+}
+
+static int dbg_show_state(struct seq_file *s, void *p)
+{
+ int pos = 0;
+
+ /* basic device status */
+ pos += seq_printf(s, "DMA engine status\n");
+ pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
+
+ return pos;
+}
+
+#define DBGFS_FUNC_DECL(name) \
+static int dbg_open_##name(struct inode *inode, struct file *file) \
+{ \
+ return single_open(file, dbg_show_##name, inode->i_private); \
+} \
+static const struct file_operations dbg_fops_##name = { \
+ .owner = THIS_MODULE, \
+ .open = dbg_open_##name, \
+ .llseek = seq_lseek, \
+ .read = seq_read, \
+ .release = single_release, \
+}
+
+DBGFS_FUNC_DECL(state);
+DBGFS_FUNC_DECL(chan_state);
+DBGFS_FUNC_DECL(descriptors);
+DBGFS_FUNC_DECL(requester_chan);
+
+static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
+{
+ char chan_name[11];
+ struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
+ struct dentry *chan_reqs = NULL;
+ void *dt;
+
+ scnprintf(chan_name, sizeof(chan_name), "%d", ch);
+ chan = debugfs_create_dir(chan_name, chandir);
+ dt = (void *)ch;
+
+ if (chan)
+ chan_state = debugfs_create_file("state", 0400, chan, dt,
+ &dbg_fops_chan_state);
+ if (chan_state)
+ chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
+ &dbg_fops_descriptors);
+ if (chan_descr)
+ chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
+ &dbg_fops_requester_chan);
+ if (!chan_reqs)
+ goto err_state;
+
+ return chan;
+
+err_state:
+ debugfs_remove_recursive(chan);
+ return NULL;
+}
+
+static void pxa_dma_init_debugfs(void)
+{
+ int i;
+ struct dentry *chandir;
+
+ dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
+ if (IS_ERR(dbgfs_root) || !dbgfs_root)
+ goto err_root;
+
+ dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
+ &dbg_fops_state);
+ if (!dbgfs_state)
+ goto err_state;
+
+ dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
+ GFP_KERNEL);
+ if (!dbgfs_state)
+ goto err_alloc;
+
+ chandir = debugfs_create_dir("channels", dbgfs_root);
+ if (!chandir)
+ goto err_chandir;
+
+ for (i = 0; i < num_dma_channels; i++) {
+ dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
+ if (!dbgfs_chan[i])
+ goto err_chans;
+ }
+
+ return;
+err_chans:
+err_chandir:
+ kfree(dbgfs_chan);
+err_alloc:
+err_state:
+ debugfs_remove_recursive(dbgfs_root);
+err_root:
+ pr_err("pxa_dma: debugfs is not available\n");
+}
+
+static void __exit pxa_dma_cleanup_debugfs(void)
+{
+ debugfs_remove_recursive(dbgfs_root);
+}
+#else
+static inline void pxa_dma_init_debugfs(void) {}
+static inline void pxa_dma_cleanup_debugfs(void) {}
+#endif
+
int pxa_request_dma (char *name, pxa_dma_prio prio,
void (*irq_handler)(int, void *),
void *data)
local_irq_restore(flags);
return i;
}
+EXPORT_SYMBOL(pxa_request_dma);
void pxa_free_dma (int dma_ch)
{
dma_channels[dma_ch].name = NULL;
local_irq_restore(flags);
}
+EXPORT_SYMBOL(pxa_free_dma);
static irqreturn_t dma_irq_handler(int irq, void *dev_id)
{
int i, dint = DINT;
+ struct dma_channel *channel;
- for (i = 0; i < num_dma_channels; i++) {
- if (dint & (1 << i)) {
- struct dma_channel *channel = &dma_channels[i];
- if (channel->name && channel->irq_handler) {
- channel->irq_handler(i, channel->data);
- } else {
- /*
- * IRQ for an unregistered DMA channel:
- * let's clear the interrupts and disable it.
- */
- printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
- DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
- }
+ while (dint) {
+ i = __ffs(dint);
+ dint &= (dint - 1);
+ channel = &dma_channels[i];
+ if (channel->name && channel->irq_handler) {
+ channel->irq_handler(i, channel->data);
+ } else {
+ /*
+ * IRQ for an unregistered DMA channel:
+ * let's clear the interrupts and disable it.
+ */
+ printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
+ DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
}
}
return IRQ_HANDLED;
for (i = 0; i < num_ch; i++) {
DCSR(i) = 0;
dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+ spin_lock_init(&dma_channels[i].lock);
}
ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
kfree(dma_channels);
return ret;
}
-
num_dma_channels = num_ch;
+
+ pxa_dma_init_debugfs();
+
return 0;
}
-
-EXPORT_SYMBOL(pxa_request_dma);
-EXPORT_SYMBOL(pxa_free_dma);
MFP_PIN_GPIO125,
MFP_PIN_GPIO126,
MFP_PIN_GPIO127,
+
+ MFP_PIN_GPIO128,
+ MFP_PIN_GPIO129,
+ MFP_PIN_GPIO130,
+ MFP_PIN_GPIO131,
+ MFP_PIN_GPIO132,
+ MFP_PIN_GPIO133,
+ MFP_PIN_GPIO134,
+ MFP_PIN_GPIO135,
+ MFP_PIN_GPIO136,
+ MFP_PIN_GPIO137,
+ MFP_PIN_GPIO138,
+ MFP_PIN_GPIO139,
+ MFP_PIN_GPIO140,
+ MFP_PIN_GPIO141,
+ MFP_PIN_GPIO142,
+ MFP_PIN_GPIO143,
+ MFP_PIN_GPIO144,
+ MFP_PIN_GPIO145,
+ MFP_PIN_GPIO146,
+ MFP_PIN_GPIO147,
+ MFP_PIN_GPIO148,
+ MFP_PIN_GPIO149,
+ MFP_PIN_GPIO150,
+ MFP_PIN_GPIO151,
+ MFP_PIN_GPIO152,
+ MFP_PIN_GPIO153,
+ MFP_PIN_GPIO154,
+ MFP_PIN_GPIO155,
+ MFP_PIN_GPIO156,
+ MFP_PIN_GPIO157,
+ MFP_PIN_GPIO158,
+ MFP_PIN_GPIO159,
+ MFP_PIN_GPIO160,
+ MFP_PIN_GPIO161,
+ MFP_PIN_GPIO162,
+ MFP_PIN_GPIO163,
+ MFP_PIN_GPIO164,
+ MFP_PIN_GPIO165,
+ MFP_PIN_GPIO166,
+ MFP_PIN_GPIO167,
+ MFP_PIN_GPIO168,
+ MFP_PIN_GPIO169,
+ MFP_PIN_GPIO170,
+ MFP_PIN_GPIO171,
+ MFP_PIN_GPIO172,
+ MFP_PIN_GPIO173,
+ MFP_PIN_GPIO174,
+ MFP_PIN_GPIO175,
+ MFP_PIN_GPIO176,
+ MFP_PIN_GPIO177,
+ MFP_PIN_GPIO178,
+ MFP_PIN_GPIO179,
+ MFP_PIN_GPIO180,
+ MFP_PIN_GPIO181,
+ MFP_PIN_GPIO182,
+ MFP_PIN_GPIO183,
+ MFP_PIN_GPIO184,
+ MFP_PIN_GPIO185,
+ MFP_PIN_GPIO186,
+ MFP_PIN_GPIO187,
+ MFP_PIN_GPIO188,
+ MFP_PIN_GPIO189,
+ MFP_PIN_GPIO190,
+ MFP_PIN_GPIO191,
+
+ MFP_PIN_GPIO255 = 255,
+
MFP_PIN_GPIO0_2,
MFP_PIN_GPIO1_2,
MFP_PIN_GPIO2_2,
#define MFP_PULL_LOW (0x1 << 21)
#define MFP_PULL_HIGH (0x2 << 21)
#define MFP_PULL_BOTH (0x3 << 21)
-#define MFP_PULL_MASK (0x3 << 21)
-#define MFP_PULL(x) (((x) >> 21) & 0x3)
+#define MFP_PULL_FLOAT (0x4 << 21)
+#define MFP_PULL_MASK (0x7 << 21)
+#define MFP_PULL(x) (((x) >> 21) & 0x7)
#define MFP_CFG_DEFAULT (MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
* MFPR_PULL_LOW 1 0 1
* MFPR_PULL_HIGH 1 1 0
* MFPR_PULL_BOTH 1 1 1
+ * MFPR_PULL_FLOAT 1 0 0
*/
#define MFPR_PULL_NONE (0)
#define MFPR_PULL_LOW (MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
#define MFPR_PULL_BOTH (MFPR_PULL_LOW | MFPR_PULLUP_EN)
#define MFPR_PULL_HIGH (MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT (MFPR_PULL_SEL)
/* mfp_spin_lock is used to ensure that MFP register configuration
* (most likely a read-modify-write operation) is atomic, and that
MFPR_PULL_LOW,
MFPR_PULL_HIGH,
MFPR_PULL_BOTH,
+ MFPR_PULL_FLOAT,
};
/* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
gpn = chip->chip.base;
for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
- BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+ BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
s3c_gpios[gpn] = chip;
}
}
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <linux/list.h>
#include <linux/err.h>
#include <linux/clk.h>
err:
return ret;
}
-EXPORT_SYMBOL_GPL(s3c_adc_convert);
+EXPORT_SYMBOL_GPL(s3c_adc_read);
static void s3c_adc_default_select(struct s3c_adc_client *client,
unsigned select)
static const char name_s3c2412[] = "S3C2412";
static const char name_s3c2440[] = "S3C2440";
static const char name_s3c2442[] = "S3C2442";
+static const char name_s3c2442b[] = "S3C2442B";
static const char name_s3c2443[] = "S3C2443";
static const char name_s3c2410a[] = "S3C2410A";
static const char name_s3c2440a[] = "S3C2440A";
.init = s3c2442_init,
.name = name_s3c2442
},
+ {
+ .idcode = 0x32440aab,
+ .idmask = 0xffffffff,
+ .map_io = s3c244x_map_io,
+ .init_clocks = s3c244x_init_clocks,
+ .init_uarts = s3c244x_init_uarts,
+ .init = s3c2442_init,
+ .name = name_s3c2442b
+ },
{
.idcode = 0x32412001,
.idmask = 0xffffffff,
{
unsigned long reload;
- pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
- buf, (unsigned long)buf->data, buf->size);
-
if (buf == NULL) {
dmawarn("buffer is NULL\n");
return -EINVAL;
}
+ pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+ buf, (unsigned long)buf->data, buf->size);
+
/* check the state of the channel before we do anything */
if (chan->load_state == S3C2410_DMALOAD_1LOADED) {
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/gpio-fns.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
/* S3C2410 and compatible exported functions */
extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+#ifdef CONFIG_S3C2410_IOTIMING
extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
struct s3c_iotimings *iot);
-
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+#else
+#define s3c2410_iotiming_calc NULL
+#define s3c2410_iotiming_get NULL
+#define s3c2410_iotiming_set NULL
+#endif /* CONFIG_S3C2410_IOTIMING */
/* S3C2412 compatible routines */
#define _ARCH_MCI_H
struct s3c24xx_mci_pdata {
+ unsigned int no_wprotect : 1;
+ unsigned int no_detect : 1;
unsigned int wprotect_invert : 1;
unsigned int detect_invert : 1; /* set => detect active high. */
+ unsigned int use_dma : 1;
unsigned int gpio_detect;
unsigned int gpio_wprotect;
#define s3c2410_init_uarts NULL
#define s3c2410_map_io NULL
#define s3c2410_init NULL
+#define s3c2410a_init NULL
#endif
extern int s3c2410_baseclk_add(void);
if (!chan)
return -EINVAL;
- buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+ buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
if (!buff) {
printk(KERN_ERR "%s: no memory for buffer\n", __func__);
return -ENOMEM;
}
- lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+ lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
if (!lli) {
printk(KERN_ERR "%s: no memory for lli\n", __func__);
ret = -ENOMEM;
printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
- dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+ dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
if (!dma_pool) {
printk(KERN_ERR "%s: failed to create pool\n", __func__);
return -ENOMEM;
struct s3c64xx_dma_buff *next;
void *pw;
- struct pl080_lli *lli;
+ struct pl080s_lli *lli;
dma_addr_t lli_dma;
};
#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##_BASE + (no))
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#define IRQ_BOARD_NR 16
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+#define NR_IRQS (IRQ_BOARD_END + 1)
#endif /* __ASM_PLAT_S3C64XX_IRQS_H */
#define S3C6400_CLKDIV0_HCLK_SHIFT (8)
#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4)
#define S3C6400_CLKDIV0_MPLL_SHIFT (4)
-#define S3C6400_CLKDIV0_ARM_MASK (0x3 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK (0x7 << 0)
+#define S3C6400_CLKDIV0_ARM_MASK (0x7 << 0)
+#define S3C6410_CLKDIV0_ARM_MASK (0xf << 0)
#define S3C6400_CLKDIV0_ARM_SHIFT (0)
/* CLKDIV1 */
return -EINVAL;
val = __raw_readl(reg);
- val &= ~(0xf << sclk->shift);
- val |= (div - 1) << sclk->shift;
+ val &= ~(0xf << sclk->divider_shift);
+ val |= (div - 1) << sclk->divider_shift;
__raw_writel(val, reg);
return 0;
clksrc |= src_nr << sclk->shift;
__raw_writel(clksrc, S3C_CLK_SRC);
+
+ clk->parent = parent;
return 0;
}
if (rate > parent_rate)
rate = parent_rate;
else {
- div = rate / parent_rate;
+ div = parent_rate / rate;
if (div == 0)
div = 1;
printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+ /* For now assume the mux always selects the crystal */
+ clk_ext_xtal_mux.parent = xtal_clk;
+
epll = s3c6400_get_epll(xtal);
mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));
stmp3xxx_dma_free_command(ch,
&descriptors
[i]);
- } while (i-- >= 0);
+ } while (i-- > 0);
}
return err;
}
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Sat Sep 12 12:00:16 2009
+# Last update: Fri Sep 18 21:42:00 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
aml_m8050 MACH_AML_M8050 AML_M8050 1644
mx35_3ds MACH_MX35_3DS MX35_3DS 1645
mars MACH_MARS MARS 1646
-ntosd_644xa MACH_NTOSD_644XA NTOSD_644XA 1647
+neuros_osd2 MACH_NEUROS_OSD2 NEUROS_OSD2 1647
badger MACH_BADGER BADGER 1648
trizeps4wl MACH_TRIZEPS4WL TRIZEPS4WL 1649
trizeps5 MACH_TRIZEPS5 TRIZEPS5 1650
zoran43xx MACH_ZORAN43XX ZORAN43XX 1660
sonix926 MACH_SONIX926 SONIX926 1661
celestialsemi MACH_CELESTIALSEMI CELESTIALSEMI 1662
-cc9m2443 MACH_CC9M2443 CC9M2443 1663
+cc9m2443js MACH_CC9M2443JS CC9M2443JS 1663
tw5334 MACH_TW5334 TW5334 1664
omap_htcartemis MACH_HTCARTEMIS HTCARTEMIS 1665
nal_hlite MACH_NAL_HLITE NAL_HLITE 1666
rd88f5181l_ge MACH_RD88F5181L_GE RD88F5181L_GE 1812
sifmain MACH_SIFMAIN SIFMAIN 1813
sam9_l9261 MACH_SAM9_L9261 SAM9_L9261 1814
-cc9m2443js MACH_CC9M2443JS CC9M2443JS 1815
+cc9m2443 MACH_CC9M2443 CC9M2443 1815
xaria300 MACH_XARIA300 XARIA300 1816
it9200 MACH_IT9200 IT9200 1817
rd88f5181l_fxo MACH_RD88F5181L_FXO RD88F5181L_FXO 1818
pss2 MACH_PSS2 PSS2 2423
davinci_apm150 MACH_DAVINCI_APM150 DAVINCI_APM150 2424
str9100 MACH_STR9100 STR9100 2425
+net5big MACH_NET5BIG NET5BIG 2426
+seabed9263 MACH_SEABED9263 SEABED9263 2427
+mx51_m2id MACH_MX51_M2ID MX51_M2ID 2428
+octvocplus_eb MACH_OCTVOCPLUS_EB OCTVOCPLUS_EB 2429
+klk_firefox MACH_KLK_FIREFOX KLK_FIREFOX 2430
+klk_wirma_module MACH_KLK_WIRMA_MODULE KLK_WIRMA_MODULE 2431
+klk_wirma_mmi MACH_KLK_WIRMA_MMI KLK_WIRMA_MMI 2432
+supersonic MACH_SUPERSONIC SUPERSONIC 2433
+liberty MACH_LIBERTY LIBERTY 2434
+mh355 MACH_MH355 MH355 2435
+pc7802 MACH_PC7802 PC7802 2436
+gnet_sgc MACH_GNET_SGC GNET_SGC 2437
/*
* Initial thread structure. Must be aligned on an 8192-byte boundary.
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
#define cpu_is_at91sam9263() (0)
#define cpu_is_at91sam9rl() (0)
#define cpu_is_at91cap9() (0)
+#define cpu_is_at91sam9g10() (0)
+#define cpu_is_at91sam9g45() (0)
+#define cpu_is_at91sam9g45es() (0)
#endif /* __ASM_ARCH_CPU_H */
#include <asm/setup.h>
#include <asm/sections.h>
-#define __page_aligned __attribute__((section(".data.page_aligned")))
-
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned_data;
struct page *empty_zero_page;
EXPORT_SYMBOL(empty_zero_page);
--- /dev/null
+This BSD-Style License applies to a few files in ./arch/blackfin directory,
+and is included here, so people understand which code they can use outside
+the Linux kernel, in non-GPL based projects.
+
+Using the files released under the "ADI BSD" license, must comply with
+these license terms.
+
+--------------------------------------------------------------------------
+
+Copyright Analog Devices, Inc.
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ - Neither the name of Analog Devices, Inc. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+ - The use of this software may or may not infringe the patent rights
+ of one or more patent holders. This license does not release you
+ from the requirement that you obtain separate licenses from these
+ patent holders to use this software.
+
+THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE
config GENERIC_IRQ_PROBE
def_bool y
+config GENERIC_HARDIRQS_NO__DO_IRQ
+ def_bool y
+
config GENERIC_GPIO
def_bool y
config SMP
depends on BF561
- select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU,
source kernel/Kconfig.hz
config GENERIC_TIME
- bool "Generic time"
- default y
+ def_bool y
config GENERIC_CLOCKEVENTS
bool "Generic clock events"
- depends on GENERIC_TIME
default y
choice
depends on GENERIC_CLOCKEVENTS
depends on !TICKSOURCE_GPTMR0
+config ARCH_USES_GETTIMEOFFSET
+ depends on !GENERIC_CLOCKEVENTS
+ def_bool y
+
source kernel/time/Kconfig
comment "Misc"
echo '* vmImage.gz - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.gz)'
echo ' vmImage.lzma - Kernel-only image for U-Boot (arch/$(ARCH)/boot/vmImage.lzma)'
echo ' install - Install kernel using'
- echo ' (your) ~/bin/$(CROSS_COMPILE)installkernel or'
- echo ' (distribution) PATH: $(CROSS_COMPILE)installkernel or'
+ echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) PATH: $(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH)'
endef
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if which ${CROSS_COMPILE}installkernel >/dev/null 2>&1; then
- exec ${CROSS_COMPILE}installkernel "$@"
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if which ${INSTALLKERNEL} >/dev/null 2>&1; then
+ exec ${INSTALLKERNEL} "$@"
fi
# Default install - same as make zlilo
+/*
+Â * Copyright 2004-2009 Analog Devices Inc.
+Â *
+Â * Licensed under the GPL-2 or later.
+Â */
+
#ifndef __ARCH_BLACKFIN_ATOMIC__
#define __ARCH_BLACKFIN_ATOMIC__
/*
- * File: include/asm-blackfin/bfin-global.h
- * Based on:
- * Author: *
- * Created:
- * Description: Global extern defines for blackfin
+ * Global extern defines for blackfin
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2006-2009 Analog Devices Inc.
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BFIN_GLOBAL_H_
*
* Copyright 2004-2008 Analog Devices Inc.
*
- * Enter bugs at http://blackfin.uclinux.org/
- *
* Licensed under the GPL-2 or later.
*/
/*
* board initialization should put one of these structures into platform_data
* and place the bfin-rotary onto platform_bus named "bfin-rotary".
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BFIN_ROTARY_H
+/*
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _bfin_simple_timer_h_
#define _bfin_simple_timer_h_
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BLACKFIN_BITOPS_H
#define _BLACKFIN_BITOPS_H
/*
- * Common header file for blackfin family of processors.
+ * Common header file for Blackfin family of processors.
*
+Â * Copyright 2004-2009 Analog Devices Inc.
+Â *
+Â * Licensed under the GPL-2 or later.
*/
#ifndef _BLACKFIN_H_
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BLACKFIN_BUG_H
#define _BLACKFIN_BUG_H
-#ifndef _BLACKFIN_BYTEORDER_H
-#define _BLACKFIN_BYTEORDER_H
-
#include <linux/byteorder/little_endian.h>
-
-#endif /* _BLACKFIN_BYTEORDER_H */
/*
- * include/asm-blackfin/cache.h
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
*/
+
#ifndef __ARCH_BLACKFIN_CACHE_H
#define __ARCH_BLACKFIN_CACHE_H
#if defined(CONFIG_SMP) && \
!defined(CONFIG_BFIN_CACHE_COHERENT)
-# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
+# if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
# define __ARCH_SYNC_CORE_ICACHE
# endif
-# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
+# if defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
# define __ARCH_SYNC_CORE_DCACHE
# endif
#ifndef __ASSEMBLY__
/*
- * File: include/asm-blackfin/cacheflush.h
- * Based on: include/asm-m68knommu/cacheflush.h
- * Author: LG Soft India
- * Copyright (C) 2004 Analog Devices Inc.
- * Created: Tue Sep 21 2004
- * Description: Blackfin low-level cache routines adapted from the i386
- * and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ * Blackfin low-level cache routines
*
- * Modified:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BLACKFIN_CACHEFLUSH_H
- /*
- * File: include/asm-blackfin/mach-common/cdef_LPBlackfin.h
- * Based on:
- * Author: unknown
- * COPYRIGHT 2005 Analog Devices
- * Created: ?
- * Description:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#ifndef _CDEF_LPBLACKFIN_H
#define _CDEF_LPBLACKFIN_H
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ * akbar.hussain@lineo.com
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BFIN_CHECKSUM_H
#define _BFIN_CHECKSUM_H
/*
- * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com
- *
* computes the checksum of a memory block at buff, length len,
* and adds in "sum" (32-bit)
*
/*
- * File: include/asm-blackfin/mach-common/clocks.h
- * Based on: include/asm-blackfin/mach-bf537/bf537.h
- * Author: Robin Getz <rgetz@blackfin.uclinux.org>
+ * Common Clock definitions for various kernel files
*
- * Created: 25Jul07
- * Description: Common Clock definitions for various kernel files
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BFIN_CLOCKS_H
/*
- * File: arch/blackfin/kernel/context.S
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
/*
/*
- * File: include/asm-blackfin/cplb.h
- * Based on: include/asm-blackfin/mach-bf537/bf537.h
- * Author: Robin Getz <rgetz@blackfin.uclinux.org>
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created: 2000
- * Description: Common CPLB definitions for CPLB init
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CPLB_H
/*
- * File: include/asm-blackfin/cplbinit.h
- * Based on:
- * Author:
+ * Common CPLB definitions for CPLB init
*
- * Created:
- * Description:
+ * Copyright 2006-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __ASM_CPLBINIT_H__
/*
- * File: arch/blackfin/include/asm/cpu.h.
- * Author: Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Philippe Gerum <rpm@xenomai.org>
*
- * Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __ASM_BLACKFIN_CPU_H
- /*
- * File: include/asm-blackfin/mach-common/def_LPBlackfin.h
- * Based on:
- * Author: unknown
- * COPYRIGHT 2005 Analog Devices
- * Created: ?
- * Description:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */
+/*
+ * Blackfin core register bit & address definitions
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or GPL-2 (or later).
+ */
#ifndef _DEF_LPBLACKFIN_H
#define _DEF_LPBLACKFIN_H
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BLACKFIN_DMA_MAPPING_H
#define _BLACKFIN_DMA_MAPPING_H
/*
- * include/asm-blackfin/dpmc.h - Miscellaneous IOCTL commands for Dynamic Power
- * Management Controller Driver.
+ * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
+ *
* Copyright (C) 2004-2008 Analog Device Inc.
*
+ * Licensed under the GPL-2
*/
+
#ifndef _BLACKFIN_DPMC_H_
#define _BLACKFIN_DPMC_H_
/*
- * File: include/asm-blackfin/early_printk.h
- * Author: Robin Getz <rgetz@blackfin.uclinux.org
+ * function prototpyes for early printk
*
- * Created: 14Aug2007
- * Description: function prototpyes for early printk
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2 or later.
*/
-
#ifndef __ASM_EARLY_PRINTK_H__
#define __ASM_EARLY_PRINTK_H__
-/* Changes made by LG Soft Oct 2004*/
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#ifndef __ASMBFIN_ELF_H
#define __ASMBFIN_ELF_H
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef __BFIN_ENTRY_H
#define __BFIN_ENTRY_H
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BFIN_FCNTL_H
#define _BFIN_FCNTL_H
-/* This file defines the fixed addresses where userspace programs can find
- atomic code sequences. */
+/*
+ * This file defines the fixed addresses where userspace programs
+ * can find atomic code sequences.
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#ifndef __BFIN_ASM_FIXED_CODE_H__
#define __BFIN_ASM_FIXED_CODE_H__
/*
- * include/asm-blackfin/flat.h -- uClinux flat-format executables
+ * uClinux flat-format executables
*
- * Copyright (C) 2003,
+ * Copyright 2003-2009 Analog Devices Inc.
*
+ * Licensed under the GPL-2
*/
#ifndef __BLACKFIN_FLAT_H__
/*
- * File: arch/blackfin/kernel/bfin_gpio.h
- * Based on:
- * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
+ * Copyright 2006-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __ARCH_BLACKFIN_GPIO_H__
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef __BFIN_HARDIRQ_H
#define __BFIN_HARDIRQ_H
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BFIN_IO_H
#define _BFIN_IO_H
/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2003 HuTao
+ * 2002 Arcturus Networks Inc. (www.arcturusnetworks.com
+ * Ted Ma <mated@sympatico.ca>
*
- * Changed by HuTao Apr18, 2003
- *
- * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
- * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
- * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
- *
- * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
- * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
- * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
+ * Licensed under the GPL-2
*/
#ifndef _BFIN_IRQ_H_
#include <linux/irqflags.h>
+#include <mach/anomaly.h>
+
/* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
#include <mach/irq.h>
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _IRQ_HANDLER_H
#define _IRQ_HANDLER_H
/*
- * l1layout.h
* Defines a layout of L1 scratchpad memory that userspace can rely on.
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
*/
#ifndef _L1LAYOUT_H_
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef __ASM_LINKAGE_H
#define __ASM_LINKAGE_H
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2002 David McCullough <davidm@snapgear.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
#ifndef __MMU_H
#define __MMU_H
-/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
-
struct sram_list_struct {
struct sram_list_struct *next;
void *addr;
/*
- * File: include/asm-blackfin/mmu_context.h
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __BLACKFIN_MMU_CONTEXT_H__
+/*
+Â * Copyright 2004-2008 Analog Devices Inc.
+Â *
+Â * Licensed under the GPL-2 or later.
+Â */
+
#ifndef _ASM_BFIN_MODULE_H
#define _ASM_BFIN_MODULE_H
* TODO: implement optimized primitives instead, or leave the generic
* implementation in place, or pick the atomic_xchg() based generic
* implementation. (see asm-generic/mutex-xchg.h for details)
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
*/
#ifndef _ASM_MUTEX_H
-/* linux/include/asm-blackfin/nand.h
- *
- * Copyright (c) 2007 Analog Devices, Inc.
- * Bryan Wu <bryan.wu@analog.com>
- *
+/*
* BF5XX - NAND flash controller platfrom_device info
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright 2007-2008 Analog Devices, Inc.
+ *
+ * Licensed under the GPL-2
*/
/* struct bf5xx_nand_platform
+/*
+Â * Copyright 2004-2009 Analog Devices Inc.
+Â *
+Â * Licensed under the GPL-2 or later.
+Â */
+
#ifndef _BLACKFIN_PAGE_H
#define _BLACKFIN_PAGE_H
-
-/* This handles the memory map.. */
+/*
+ * This handles the memory map
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
#ifdef CONFIG_BLACKFIN
#define PAGE_OFFSET_RAW 0x00000000
/*
- * File: arch/blackfin/include/asm/pda.h
- * Author: Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Philippe Gerum <rpm@xenomai.org>
*
- * Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef _ASM_BLACKFIN_PDA_H
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BLACKFIN_PGTABLE_H
#define _BLACKFIN_PGTABLE_H
#define VMALLOC_START 0
#define VMALLOC_END 0xffffffff
+/* provide a special get_unmapped_area for framebuffer mmaps of nommu */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+ unsigned long, unsigned long,
+ unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
#include <asm-generic/pgtable.h>
#endif /* _BLACKFIN_PGTABLE_H */
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
#ifndef __BFIN_POLL_H
#define __BFIN_POLL_H
/*
- * Common header file for blackfin family of processors.
+ * Common header file for Blackfin family of processors
*
+Â * Copyright 2007-2008 Analog Devices Inc.
+Â *
+Â * Licensed under the GPL-2 or later.
*/
#ifndef _PORTMUX_H_
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef __ARCH_BFIN_POSIX_TYPES_H
#define __ARCH_BFIN_POSIX_TYPES_H
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef __ASM_BFIN_PROCESSOR_H
#define __ASM_BFIN_PROCESSOR_H
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BFIN_PTRACE_H
#define _BFIN_PTRACE_H
+/*
+Â * Copyright 2004-2009 Analog Devices Inc.
+Â *
+Â * Licensed under the GPL-2 or later.
+Â */
+
#ifndef _BLACKFIN_SECTIONS_H
#define _BLACKFIN_SECTIONS_H
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BFIN_SEGMENT_H
#define _BFIN_SEGMENT_H
+/*
+Â * Copyright 2004-2008 Analog Devices Inc.
+Â *
+Â * Licensed under the GPL-2 or later.
+Â */
+
#ifndef _ASM_BLACKFIN_SIGCONTEXT_H
#define _ASM_BLACKFIN_SIGCONTEXT_H
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BFIN_SIGINFO_H
#define _BFIN_SIGINFO_H
/*
- * File: arch/blackfin/include/asm/smp.h
- * Author: Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Philippe Gerum <rpm@xenomai.org>
*
- * Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __ASM_BLACKFIN_SMP_H
+/*
+Â * Copyright 2004-2009 Analog Devices Inc.
+Â *
+Â * Licensed under the GPL-2 or later.
+Â */
+
#ifndef __BFIN_SPINLOCK_H
#define __BFIN_SPINLOCK_H
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef __ASM_SPINLOCK_TYPES_H
#define __ASM_SPINLOCK_TYPES_H
+/*
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
#ifndef _BFIN_STAT_H
#define _BFIN_STAT_H
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BLACKFIN_STRING_H_
#define _BLACKFIN_STRING_H_
+/*
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BLACKFIN_SWAB_H
#define _BLACKFIN_SWAB_H
/*
- * File: include/asm/system.h
- * Based on:
- * Author: Tony Kou (tonyko@lineo.ca)
- * Copyright (c) 2002 Arcturus Networks Inc.
- * (www.arcturusnetworks.com)
- * Copyright (c) 2003 Metrowerks (www.metrowerks.com)
- * Copyright (c) 2004 Analog Device Inc.
- * Created: 25Jan2001 - Tony Kou
- * Description: system.h include file
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Tony Kou (tonyko@lineo.ca)
*
- * Modified: 22Sep2006 - Robin Getz
- * - move include blackfin.h down, so I can get access to
- * irq functions in other include files.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _BLACKFIN_SYSTEM_H
/*
- * File: include/asm-blackfin/thread_info.h
- * Based on: include/asm-m68knommu/thread_info.h
- * Author: LG Soft India
- * Copyright (C) 2004-2005 Analog Devices Inc.
- * Created: Tue Sep 21 2004
- * Description: Blackfin low-level thread information
- * Modified:
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _ASM_THREAD_INFO_H
+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BLACKFIN_TLB_H
#define _BLACKFIN_TLB_H
/*
- * Common header file for blackfin family of processors.
+ * header file for hardware trace functions
*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BLACKFIN_TRACE_
/*
- * linux/include/asm/traps.h
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2001 Lineo, Inc
+ * Tony Kou
+ * 1993 Hamish Macdonald
*
- * Copyright (C) 1993 Hamish Macdonald
- *
- * Lineo, Inc Jul 2001 Tony Kou
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
+ * Licensed under the GPL-2
*/
#ifndef _BFIN_TRAPS_H
-/* Changes made by Lineo Inc. May 2001
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
*
* Based on: include/asm-m68knommu/uaccess.h
*/
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef __ASM_BFIN_UNISTD_H
#define __ASM_BFIN_UNISTD_H
/*
/*
- * File: arch/blackfin/kernel/asm-offsets.c
- * Based on:
- * Author:
+ * generate definitions needed by assembly language modules
*
- * Created:
- * Description: generate definitions needed by assembly language modules.
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/stddef.h>
* bfin_dma_5xx.c - Blackfin DMA implementation
*
* Copyright 2004-2008 Analog Devices Inc.
+ *
* Licensed under the GPL-2 or later.
*/
/*
- * File: arch/blackfin/kernel/bfin_gpio.c
- * Based on:
- * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
+ * GPIO Abstraction Layer
*
- * Created:
- * Description: GPIO Abstraction Layer
+ * Copyright 2006-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/delay.h>
/*
* Blackfin CPLB initialization
*
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
+
#include <linux/module.h>
#include <asm/blackfin.h>
/*
- * Blackfin CPLB exception handling.
- * Copyright 2004-2007 Analog Devices Inc.
+ * Blackfin CPLB exception handling for when MPU in on
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
+
#include <linux/module.h>
#include <linux/mm.h>
/*
* Blackfin CPLB initialization
*
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/kernel/cplb-nompu-c/cplbmgr.c
* Based on: arch/blackfin/kernel/cplb-mpu/cplbmgr.c
* Author: Michael McTernan <mmcternan@airvana.com>
*
- * Created: 01Nov2008
* Description: CPLB miss handler.
*
* Modified:
* Copyright 2008 Airvana Inc.
- * Copyright 2004-2007 Analog Devices Inc.
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2 or later
*/
#include <linux/kernel.h>
* arch/blackfin/kernel/cplbinfo.c - display CPLB status
*
* Copyright 2004-2008 Analog Devices Inc.
+ *
* Licensed under the GPL-2 or later.
*/
.show = cplbinfo_show,
};
+#define CPLBINFO_DCPLB_FLAG 0x80000000
+
static int cplbinfo_open(struct inode *inode, struct file *file)
{
- char buf[256], *path, *p;
+ struct proc_dir_entry *pde = PDE(file->f_path.dentry->d_inode);
+ char cplb_type;
unsigned int cpu;
- char *s_cpu, *s_cplb;
int ret;
struct seq_file *m;
struct cplbinfo_data *cdata;
- path = d_path(&file->f_path, buf, sizeof(buf));
- if (IS_ERR(path))
- return PTR_ERR(path);
- s_cpu = strstr(path, "/cpu");
- s_cplb = strrchr(path, '/');
- if (!s_cpu || !s_cplb)
- return -EINVAL;
+ cpu = (unsigned int)pde->data;
+ cplb_type = cpu & CPLBINFO_DCPLB_FLAG ? 'D' : 'I';
+ cpu &= ~CPLBINFO_DCPLB_FLAG;
- cpu = simple_strtoul(s_cpu + 4, &p, 10);
if (!cpu_online(cpu))
return -ENODEV;
cdata = m->private;
cdata->pos = 0;
- cdata->cplb_type = toupper(s_cplb[1]);
+ cdata->cplb_type = cplb_type;
cplbinfo_seq_init(cdata, cpu);
return 0;
if (!cpu_dir)
return -ENOMEM;
- proc_create("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops);
- proc_create("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops);
+ proc_create_data("icplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
+ (void *)cpu);
+ proc_create_data("dcplb", S_IRUGO, cpu_dir, &cplbinfo_fops,
+ (void *)(cpu | CPLBINFO_DCPLB_FLAG));
}
return 0;
/*
- * File: arch/blackfin/kernel/dma-mapping.c
- * Based on:
- * Author:
+ * Dynamic DMA mapping support
*
- * Created:
- * Description: Dynamic DMA mapping support.
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/types.h>
/*
- * File: arch/blackfin/kernel/early_printk.c
- * Based on: arch/x86_64/kernel/early_printk.c
- * Author: Robin Getz <rgetz@blackfin.uclinux.org
+ * allow a console to be used for early printk
+ * derived from arch/x86/kernel/early_printk.c
*
- * Created: 14Aug2007
- * Description: allow a console to be used for early printk
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2
*/
#include <linux/kernel.h>
/*
- * File: arch/blackfin/kernel/entry.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/linkage.h>
* These are aligned to 16 bytes, so that we have some space to replace
* these sequences with something else (e.g. kernel traps if we ever do
* BF561 SMP).
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
*/
+
#include <linux/linkage.h>
#include <linux/init.h>
#include <linux/unistd.h>
/*
- * arch/blackfin/kernel/flat.c
+ * Copyright 2007 Analog Devices Inc.
*
- * Copyright (C) 2007 Analog Devices, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * Licensed under the GPL-2.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/kernel/init_task.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/mm.h>
/*
- * File: arch/blackfin/kernel/irqchip.c
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/kernel_stat.h>
/*
- * File: arch/blackfin/kernel/module.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#define pr_fmt(fmt) "module %s: " fmt
/*
- * File: arch/blackfin/kernel/process.c
- * Based on:
- * Author:
+ * Blackfin architecture-dependent process handling
*
- * Created:
- * Description: Blackfin architecture-dependent process handling.
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/kernel/ptrace.c
- * Based on: Taken from linux/kernel/ptrace.c
- * Author: linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ * linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
+ * these modifications are Copyright 2004-2009 Analog Devices Inc.
*
- * Created: 1/23/92
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2
*/
#include <linux/kernel.h>
/*
- * arch/blackfin/kernel/setup.c
- *
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
*
* Copyright 2009 Analog Devices Inc.
*
- * Enter bugs at http://blackfin.uclinux.org/
- *
* Licensed under the GPL-2 or later.
*/
/*
- * File: arch/blackfin/kernel/signal.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/signal.h>
/*
- * File: arch/blackfin/kernel/sys_bfin.c
- * Based on:
- * Author:
+ * contains various random system calls that have a non-standard
+ * calling sequence on the Linux/Blackfin platform.
*
- * Created:
- * Description: This file contains various random system calls that
- * have a non-standard calling sequence on the Linux/bfin
- * platform.
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/spinlock.h>
{
return safe_dma_memcpy(dest, src, len);
}
+
+#if defined(CONFIG_FB) || defined(CONFIG_FB_MODULE)
+#include <linux/fb.h>
+unsigned long get_fb_unmapped_area(struct file *filp, unsigned long orig_addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct fb_info *info = filp->private_data;
+ return (unsigned long)info->screen_base;
+}
+EXPORT_SYMBOL(get_fb_unmapped_area);
+#endif
/*
- * linux/arch/kernel/time-ts.c
- *
* Based on arm clockevents implementation and old bfin time tick.
*
- * Copyright(C) 2008, GeoTechnologies, Vitja Makarov
+ * Copyright 2008-2009 Analog Devics Inc.
+ * 2008 GeoTechnologies
+ * Vitja Makarov
*
- * This code is licenced under the GPL version 2. For details see
- * kernel-base/COPYING.
+ * Licensed under the GPL-2
*/
+
#include <linux/module.h>
#include <linux/profile.h>
#include <linux/interrupt.h>
#include <linux/time.h>
#include <linux/irq.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include <asm/blackfin.h>
#include <asm/time.h>
#endif
}
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
/*
* Should return useconds since last timer tick
*/
-#ifndef CONFIG_GENERIC_TIME
-static unsigned long gettimeoffset(void)
+u32 arch_gettimeoffset(void)
{
unsigned long offset;
unsigned long clocks_per_jiffy;
time_sched_init(timer_interrupt);
}
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = gettimeoffset();
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / NSEC_PER_USEC);
- }
- while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= USEC_PER_SEC) {
- usec -= USEC_PER_SEC;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- /*
- * This is revolting. We need to set the xtime.tv_usec
- * correctly. However, the value in this location is
- * is value at the last tick.
- * Discover what correction gettimeofday
- * would have done, and then undo it!
- */
- nsec -= (gettimeoffset() * NSEC_PER_USEC);
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
-
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
-
- return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
-
/*
* Scheduler clock - returns current time in nanosec units.
*/
/*
- * File: arch/blackfin/kernel/traps.c
- * Based on:
- * Author: Hamish Macdonald
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description: uses S/W interrupt 15 for the system calls
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#include <linux/bug.h>
/*
- * File: arch/blackfin/kernel/vmlinux.lds.S
- * Based on: none - original work
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created: Tue Sep 21 2004
- * Description: Master linker script for blackfin architecture
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#define VMLINUX_SYMBOL(_sym_) _##_sym_
{
__sdata = .;
/* This gets done first, so the glob doesn't suck it in */
- . = ALIGN(32);
- *(.data.cacheline_aligned)
+ CACHELINE_ALIGNED_DATA(32)
#if !L1_DATA_A_LENGTH
. = ALIGN(32);
DATA_DATA
CONSTRUCTORS
- /* make sure the init_task is aligned to the
- * kernel thread size so we can locate the kernel
- * stack properly and quickly.
- */
- . = ALIGN(THREAD_SIZE);
- *(.init_task.data)
+ INIT_TASK_DATA(THREAD_SIZE)
__edata = .;
}
. = ALIGN(PAGE_SIZE);
___init_begin = .;
- .init.text :
- {
- . = ALIGN(PAGE_SIZE);
- __sinittext = .;
- INIT_TEXT
- __einittext = .;
- }
- .init.data :
- {
- . = ALIGN(16);
- INIT_DATA
- }
- .init.setup :
- {
- . = ALIGN(16);
- ___setup_start = .;
- *(.init.setup)
- ___setup_end = .;
- }
- .initcall.init :
- {
- ___initcall_start = .;
- INITCALLS
- ___initcall_end = .;
- }
- .con_initcall.init :
- {
- ___con_initcall_start = .;
- *(.con_initcall.init)
- ___con_initcall_end = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ . = ALIGN(16);
+ INIT_DATA_SECTION(16)
PERCPU(4)
- SECURITY_INIT
/* we have to discard exit text and such at runtime, not link time, to
* handle embedded cross-section references (alt instructions, bug
EXIT_DATA
}
- .init.ramfs :
- {
- . = ALIGN(4);
- ___initramfs_start = .;
- *(.init.ramfs)
- . = ALIGN(4);
- ___initramfs_end = .;
- }
-
__l1_lma_start = .;
- .text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
+ .text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
{
. = ALIGN(4);
__stext_l1 = .;
/*
- * File: arch/blackfin/lib/ashldi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include "gcclib.h"
/*
- * File: arch/blackfin/lib/ashrdi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include "gcclib.h"
/*
- * File: arch/blackfin/lib/checksum.c
- * Based on: none - original work
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description: An implementation of the TCP/IP protocol suite for the LINUX
- * operating system. INET is implemented using the BSD Socket
- * interface as the means of communication with the user level.
+ * Licensed under the GPL-2 or later.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
+ * An implementation of the TCP/IP protocol suite for the LINUX operating
+ * system. INET is implemented using the BSD Socket interface as the
+ * means of communication with the user level.
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/lib/divsi3.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description: 16 / 32 bit signed division.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ *
+ * 16 / 32 bit signed division.
* Special cases :
* 1) If(numerator == 0)
* return 0
* R0 - Quotient (o)
* Registers Used : R2-R7,P0-P2
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
.global ___divsi3;
/*
- * File: arch/blackfin/lib/gcclib.h
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#define BITS_PER_UNIT 8
/*
- * File: arch/blackfin/lib/lshrdi3.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include "gcclib.h"
/*
- * File: arch/blackfin/lib/memchr.S
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/*
- * File: arch/blackfin/lib/memcmp.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/*
- * File: arch/blackfin/lib/memcpy.S
- * Based on:
- * Author:
+ * internal version of memcpy(), issued by the compiler to copy blocks of
+ * data around. This is really memmove() - it has to be able to deal with
+ * possible overlaps, because that ambiguity is when the compiler gives up
+ * and calls a function. We have our own, internal version so that we get
+ * something we trust, even if the user has redefined the normal symbol.
*
- * Created:
- * Description: internal version of memcpy(), issued by the compiler
- * to copy blocks of data around.
- * This is really memmove() - it has to be able to deal with
- * possible overlaps, because that ambiguity is when the compiler
- * gives up and calls a function. We have our own, internal version
- * so that we get something we trust, even if the user has redefined
- * the normal symbol.
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/*
- * File: arch/blackfin/lib/memmove.S
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/*
- * File: arch/blackfin/lib/memset.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/*
- * File: arch/blackfin/lib/modsi3.S
- * Based on:
- * Author:
+ * This program computes 32 bit signed remainder. It calls div32 function
+ * for quotient estimation.
+ * Registers in: R0, R1 = Numerator/ Denominator
+ * Registers out: R0 = Remainder
*
- * Created:
- * Description: This program computes 32 bit signed remainder. It calls div32 function
- * for quotient estimation.
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Registers used :
- * Numerator/ Denominator in R0, R1
- * R0 - returns remainder.
- * R2-R7
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
.global ___modsi3;
+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
.align 2
.global ___muldi3;
.type ___muldi3, STT_FUNC;
/*
- * File: arch/blackfin/lib/outs.S
- * Based on:
- * Author: Bas Vermeulen <bas@buyways.nl>
+ * Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
*
- * Created: Tue Mar 22 15:27:24 CEST 2005
- * Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
+ * Copyright 2005-2009 Analog Devices Inc.
+ * 2005 BuyWays BV
+ * Bas Vermeulen <bas@buyways.nl>
*
- * Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2.
*/
#include <linux/linkage.h>
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
.align 2
.global ___smulsi3_highpart;
.type ___smulsi3_highpart, STT_FUNC;
/*
- * File: arch/blackfin/lib/udivsi3.S
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#include <linux/linkage.h>
/*
- * File: arch/blackfin/lib/umodsi3.S
- * Based on:
- * Author:
+ * libgcc1 routines for Blackfin 5xx
*
- * Created:
- * Description: libgcc1 routines for Blackfin 5xx
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifdef CONFIG_ARITHMETIC_OPS_L1
+/*
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
+ */
+
.align 2
.global ___umulsi3_highpart;
.type ___umulsi3_highpart, STT_FUNC;
/*
- * File: arch/blackfin/mach-bf518/boards/ezbrd.c
- * Based on: arch/blackfin/mach-bf527/boards/ezbrd.c
- * Author: Bryan Wu <cooloney@kernel.org>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
static const unsigned int cclk_vlev_datasheet[] =
{
VRPAIR(VLEV_100, 400000000),
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&ezbrd_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init ezbrd_init(void)
/*
- * File: arch/blackfin/mach-bf518/dma.c
- * Based on:
- * Author: Bryan Wu <cooloney@kernel.org>
+ * the simple DMA Implementation for Blackfin
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
+
#include <linux/module.h>
#include <asm/blackfin.h>
/*
- * File: include/asm-blackfin/mach-bf518/bf518.h
- * Based on: include/asm-blackfin/mach-bf527/bf527.h
- * Author: Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
*
- * Created:
- * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF518
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __MACH_BF518_H__
/*
- * file: include/asm-blackfin/mach-bf518/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * created:
- * description:
- * blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
*/
#include <linux/serial.h>
/*
- * File: include/asm-blackfin/mach-bf518/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _MACH_BLACKFIN_H_
/*
- * File: include/asm-blackfin/mach-bf518/cdefbf512.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description: system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _CDEF_BF512_H
/*
- * File: include/asm-blackfin/mach-bf518/cdefbf514.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description: system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF514_H
/*
- * File: include/asm-blackfin/mach-bf518/cdefbf516.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description: system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF516_H
/*
- * File: include/asm-blackfin/mach-bf518/cdefbf518.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description: system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF518_H
#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT)
#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val)
+#define bfin_read_EMAC_PTP_CTL() bfin_read16(EMAC_PTP_CTL)
+#define bfin_write_EMAC_PTP_CTL(val) bfin_write16(EMAC_PTP_CTL, val)
+#define bfin_read_EMAC_PTP_IE() bfin_read16(EMAC_PTP_IE)
+#define bfin_write_EMAC_PTP_IE(val) bfin_write16(EMAC_PTP_IE, val)
+#define bfin_read_EMAC_PTP_ISTAT() bfin_read16(EMAC_PTP_ISTAT)
+#define bfin_write_EMAC_PTP_ISTAT(val) bfin_write16(EMAC_PTP_ISTAT, val)
+#define bfin_read_EMAC_PTP_FOFF() bfin_read32(EMAC_PTP_FOFF)
+#define bfin_write_EMAC_PTP_FOFF(val) bfin_write32(EMAC_PTP_FOFF, val)
+#define bfin_read_EMAC_PTP_FV1() bfin_read32(EMAC_PTP_FV1)
+#define bfin_write_EMAC_PTP_FV1(val) bfin_write32(EMAC_PTP_FV1, val)
+#define bfin_read_EMAC_PTP_FV2() bfin_read32(EMAC_PTP_FV2)
+#define bfin_write_EMAC_PTP_FV2(val) bfin_write32(EMAC_PTP_FV2, val)
+#define bfin_read_EMAC_PTP_FV3() bfin_read32(EMAC_PTP_FV3)
+#define bfin_write_EMAC_PTP_FV3(val) bfin_write32(EMAC_PTP_FV3, val)
+#define bfin_read_EMAC_PTP_ADDEND() bfin_read32(EMAC_PTP_ADDEND)
+#define bfin_write_EMAC_PTP_ADDEND(val) bfin_write32(EMAC_PTP_ADDEND, val)
+#define bfin_read_EMAC_PTP_ACCR() bfin_read32(EMAC_PTP_ACCR)
+#define bfin_write_EMAC_PTP_ACCR(val) bfin_write32(EMAC_PTP_ACCR, val)
+#define bfin_read_EMAC_PTP_OFFSET() bfin_read32(EMAC_PTP_OFFSET)
+#define bfin_write_EMAC_PTP_OFFSET(val) bfin_write32(EMAC_PTP_OFFSET, val)
+#define bfin_read_EMAC_PTP_TIMELO() bfin_read32(EMAC_PTP_TIMELO)
+#define bfin_write_EMAC_PTP_TIMELO(val) bfin_write32(EMAC_PTP_TIMELO, val)
+#define bfin_read_EMAC_PTP_TIMEHI() bfin_read32(EMAC_PTP_TIMEHI)
+#define bfin_write_EMAC_PTP_TIMEHI(val) bfin_write32(EMAC_PTP_TIMEHI, val)
+#define bfin_read_EMAC_PTP_RXSNAPLO() bfin_read32(EMAC_PTP_RXSNAPLO)
+#define bfin_read_EMAC_PTP_RXSNAPHI() bfin_read32(EMAC_PTP_RXSNAPHI)
+#define bfin_read_EMAC_PTP_TXSNAPLO() bfin_read32(EMAC_PTP_TXSNAPLO)
+#define bfin_read_EMAC_PTP_TXSNAPHI() bfin_read32(EMAC_PTP_TXSNAPHI)
+#define bfin_read_EMAC_PTP_ALARMLO() bfin_read32(EMAC_PTP_ALARMLO)
+#define bfin_write_EMAC_PTP_ALARMLO(val) bfin_write32(EMAC_PTP_ALARMLO, val)
+#define bfin_read_EMAC_PTP_ALARMHI() bfin_read32(EMAC_PTP_ALARMHI)
+#define bfin_write_EMAC_PTP_ALARMHI(val) bfin_write32(EMAC_PTP_ALARMHI, val)
+#define bfin_read_EMAC_PTP_ID_OFF() bfin_read16(EMAC_PTP_ID_OFF)
+#define bfin_write_EMAC_PTP_ID_OFF(val) bfin_write16(EMAC_PTP_ID_OFF, val)
+#define bfin_read_EMAC_PTP_ID_SNAP() bfin_read32(EMAC_PTP_ID_SNAP)
+#define bfin_write_EMAC_PTP_ID_SNAP(val) bfin_write32(EMAC_PTP_ID_SNAP, val)
+#define bfin_read_EMAC_PTP_PPS_STARTHI() bfin_read32(EMAC_PTP_PPS_STARTHI)
+#define bfin_write_EMAC_PTP_PPS_STARTHI(val) bfin_write32(EMAC_PTP_PPS_STARTHI, val)
+#define bfin_read_EMAC_PTP_PPS_PERIOD() bfin_read32(EMAC_PTP_PPS_PERIOD)
+#define bfin_write_EMAC_PTP_PPS_PERIOD(val) bfin_write32(EMAC_PTP_PPS_PERIOD, val)
+
/* Removable Storage Interface Registers */
#define bfin_read_RSI_PWR_CTL() bfin_read16(RSI_PWR_CONTROL)
/*
- * File: include/asm-blackfin/mach-bf518/cdefBF51x_base.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF52X_H
/*
- * File: include/asm-blackfin/mach-bf518/defBF512.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF512_H
/*
- * File: include/asm-blackfin/mach-bf518/defBF514.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF514_H
/*
- * File: include/asm-blackfin/mach-bf518/defBF516.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF516_H
/*
- * File: include/asm-blackfin/mach-bf518/defBF518.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF518_H
#define RWR 0x1 /* Read Wait Request */
+/* Bit masks for EMAC_PTP_CTL */
+
+#define PTP_EN 0x1 /* Enable the PTP_TSYNC module */
+#define TL 0x2 /* Timestamp lock control */
+#define ASEN 0x10 /* Auxiliary snapshot control */
+#define PPSEN 0x80 /* Pulse-per-second (PPS) control */
+#define CKOEN 0x2000 /* Clock output control */
+
+/* Bit masks for EMAC_PTP_IE */
+
+#define ALIE 0x1 /* Alarm interrupt enable */
+#define RXEIE 0x2 /* Receive event interrupt enable */
+#define RXGIE 0x4 /* Receive general interrupt enable */
+#define TXIE 0x8 /* Transmit interrupt enable */
+#define RXOVE 0x10 /* Receive overrun error interrupt enable */
+#define TXOVE 0x20 /* Transmit overrun error interrupt enable */
+#define ASIE 0x40 /* Auxiliary snapshot interrupt enable */
+
+/* Bit masks for EMAC_PTP_ISTAT */
+
+#define ALS 0x1 /* Alarm status */
+#define RXEL 0x2 /* Receive event interrupt status */
+#define RXGL 0x4 /* Receive general interrupt status */
+#define TXTL 0x8 /* Transmit snapshot status */
+#define RXOV 0x10 /* Receive snapshot overrun status */
+#define TXOV 0x20 /* Transmit snapshot overrun status */
+#define ASL 0x40 /* Auxiliary snapshot interrupt status */
+
#endif /* _DEF_BF518_H */
/*
- * File: include/asm-blackfin/mach-bf518/defBF51x_base.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF51X_H
/*
- * File: arch/blackfin/mach-bf518/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
* Copyright (C) 2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/*
- * file: include/asm-blackfin/mach-bf518/irq.h
- * based on: include/asm-blackfin/mach-bf527/irq.h
- * author: Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
*
- * created:
- * description:
- * system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
*/
#ifndef _BF518_IRQ_H_
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
/*
- * File: arch/blackfin/mach-bf518/ints-priority.c
- * Based on: arch/blackfin/mach-bf527/ints-priority.c
- * Author: Bryan Wu <cooloney@kernel.org>
+ * Set up the interrupt priorities
*
- * Created:
- * Description: Set up the interrupt priorities
+ * Copyright 2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-bf527/boards/cm-bf527.c
- * Based on: arch/blackfin/mach-bf537/boards/stamp.c
- * Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Bluetechnix
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif /* spi master and devices */
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
static struct mtd_partition cm_partitions[] = {
{
.irq = IRQ_PF8,
},
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ {
+ I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+ },
+#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
static const unsigned int cclk_vlev_datasheet[] =
{
VRPAIR(VLEV_100, 400000000),
&bfin_spi0_device,
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
&cm_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init cm_init(void)
/*
- * File: arch/blackfin/mach-bf527/boards/ezbrd.c
- * Based on: arch/blackfin/mach-bf537/boards/stamp.c
- *
Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ *
Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
static const unsigned int cclk_vlev_datasheet[] =
{
VRPAIR(VLEV_100, 400000000),
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&ezbrd_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init ezbrd_init(void)
/*
- * File: arch/blackfin/mach-bf527/boards/ezkit.c
- * Based on: arch/blackfin/mach-bf537/boards/stamp.c
- *
Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ *
Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0
.irq = IRQ_PF8,
},
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ {
+ I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+ },
+#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
static const unsigned int cclk_vlev_datasheet[] =
{
VRPAIR(VLEV_100, 400000000),
&bf52x_t350mcqb_device,
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&ezkit_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init ezkit_init(void)
/*
- * File: arch/blackfin/mach-bf527/dma.c
- * Based on:
- * Author:
+ * This file contains the simple DMA Implementation for Blackfin
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
+
#include <linux/module.h>
#include <asm/blackfin.h>
/*
- * File: include/asm-blackfin/mach-bf527/bf527.h
- * Based on: include/asm-blackfin/mach-bf537/bf537.h
- * Author: Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Created:
- * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __MACH_BF527_H__
/*
- * file: include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * created:
- * description:
- * blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
*/
#include <linux/serial.h>
/*
- * File: include/asm-blackfin/mach-bf527/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _MACH_BLACKFIN_H_
/*
- * File: include/asm-blackfin/mach-bf527/cdefbf522.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description: system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF522_H
/*
- * File: include/asm-blackfin/mach-bf527/cdefbf525.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description: system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF525_H
/*
- * File: include/asm-blackfin/mach-bf527/cdefbf527.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description: system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF527_H
/*
- * File: include/asm-blackfin/mach-bf527/cdefBF52x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF52X_H
/*
- * File: include/asm-blackfin/mach-bf527/defBF522.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF522_H
/*
- * File: include/asm-blackfin/mach-bf527/defBF525.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF525_H
/*
- * File: include/asm-blackfin/mach-bf527/defBF527.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF527_H
/*
- * File: include/asm-blackfin/mach-bf527/defBF52x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF52X_H
/*
- * File: arch/blackfin/mach-bf527/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
* Copyright (C) 2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/*
- * file: include/asm-blackfin/mach-bf527/irq.h
- * based on: include/asm-blackfin/mach-bf537/irq.h
- * author: Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * created:
- * description:
- * system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
*/
#ifndef _BF527_IRQ_H_
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
/*
- * File: arch/blackfin/mach-bf537/ints-priority.c
- * Based on: arch/blackfin/mach-bf533/ints-priority.c
- * Author: Michael Hennerich (michael.hennerich@analog.com)
+ * Set up the interrupt priorities
*
- * Created:
- * Description: Set up the interrupt priorities
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-bf533/H8606.c
- * Based on: arch/blackfin/mach-bf533/stamp.c
- * Author: Javier Herrero <jherrero@hvsistemas.es>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2007-2008 HV Sistemas S.L.
+ * Javier Herrero <jherrero@hvsistemas.es>
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2007
- * Description: Board Info File for the HV Sistemas H8606 board
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc
- * Copyright 2007,2008 HV Sistemas S.L.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
/*
- * File: arch/blackfin/mach-bf533/blackstamp.c
- * Based on: arch/blackfin/mach-bf533/stamp.c
- * Author: Benjamin Matthews <bmat@lle.rochester.edu>
- * Aidan Williams <aidan@nicta.com.au>
+ * Board Info File for the BlackStamp
*
- * Created: 2008
- * Description: Board Info File for the BlackStamp
- *
- * Copyright 2005 National ICT Australia (NICTA)
* Copyright 2004-2008 Analog Devices Inc.
- *
- * Enter bugs at http://blackfin.uclinux.org/
+ * 2008 Benjamin Matthews <bmat@lle.rochester.edu>
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
* More info about the BlackStamp at:
* http://blackfin.uclinux.org/gf/project/blackstamp/
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
&i2c_gpio_device,
#endif
-
- &bfin_gpios_device,
};
static int __init blackstamp_init(void)
/*
- * File: arch/blackfin/mach-bf533/boards/cm_bf533.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Bluetechnix
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description: Board description file
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
¶_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init cm_bf533_init(void)
/*
- * File: arch/blackfin/mach-bf533/ezkit.c
- * Based on: Original Work
- *
Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ *
Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description:
- *
- * Modified: Robin Getz <rgetz@blackfin.uclinux.org> - Named the boards
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb/isp1362.h>
#endif
#include <linux/irq.h>
+#include <linux/i2c.h>
#include <asm/dma.h>
#include <asm/bfin5xx_spi.h>
#include <asm/portmux.h>
};
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
/*
* USB-LAN EzExtender board
* Driver needs to know address, irq and flag pin.
};
#endif
-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
-static const char *map_probes[] = {
- "stm_flash",
- NULL,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition ezkit_partitions_a[] = {
+ {
+ .name = "bootloader(nor a)",
+ .size = 0x40000,
+ .offset = 0,
+ }, {
+ .name = "linux kernel(nor a)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
};
-static struct platdata_mtd_ram stm_pri_data_a = {
- .mapname = "Flash A Primary",
- .map_probes = map_probes,
- .bankwidth = 2,
+static struct physmap_flash_data ezkit_flash_data_a = {
+ .width = 2,
+ .parts = ezkit_partitions_a,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions_a),
};
-static struct resource stm_pri_resource_a = {
+static struct resource ezkit_flash_resource_a = {
.start = 0x20000000,
.end = 0x200fffff,
.flags = IORESOURCE_MEM,
};
-static struct platform_device stm_pri_device_a = {
- .name = "mtd-ram",
+static struct platform_device ezkit_flash_device_a = {
+ .name = "physmap-flash",
.id = 0,
.dev = {
- .platform_data = &stm_pri_data_a,
+ .platform_data = &ezkit_flash_data_a,
},
.num_resources = 1,
- .resource = &stm_pri_resource_a,
+ .resource = &ezkit_flash_resource_a,
+};
+
+static struct mtd_partition ezkit_partitions_b[] = {
+ {
+ .name = "file system(nor b)",
+ .size = MTDPART_SIZ_FULL,
+ .offset = MTDPART_OFS_APPEND,
+ },
};
-static struct platdata_mtd_ram stm_pri_data_b = {
- .mapname = "Flash B Primary",
- .map_probes = map_probes,
- .bankwidth = 2,
+static struct physmap_flash_data ezkit_flash_data_b = {
+ .width = 2,
+ .parts = ezkit_partitions_b,
+ .nr_parts = ARRAY_SIZE(ezkit_partitions_b),
};
-static struct resource stm_pri_resource_b = {
+static struct resource ezkit_flash_resource_b = {
.start = 0x20100000,
.end = 0x201fffff,
.flags = IORESOURCE_MEM,
};
-static struct platform_device stm_pri_device_b = {
- .name = "mtd-ram",
+static struct platform_device ezkit_flash_device_b = {
+ .name = "physmap-flash",
.id = 4,
.dev = {
- .platform_data = &stm_pri_data_b,
+ .platform_data = &ezkit_flash_data_b,
},
.num_resources = 1,
- .resource = &stm_pri_resource_b,
+ .resource = &ezkit_flash_resource_b,
};
#endif
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
},
};
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ {
+ I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+ },
+#endif
+};
+
static struct platform_device *ezkit_devices[] __initdata = {
&bfin_dpmc,
-#if defined(CONFIG_MTD_PSD4256G) || defined(CONFIG_MTD_PSD4256G_MODULE)
- &stm_pri_device_a,
- &stm_pri_device_b,
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+ &ezkit_flash_device_a,
+ &ezkit_flash_device_b,
#endif
#if defined(CONFIG_MTD_PLATRAM) || defined(CONFIG_MTD_PLATRAM_MODULE)
&bfin_spi0_device,
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
&rtc_device,
#endif
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
&i2c_gpio_device,
#endif
-
- &bfin_gpios_device,
};
static int __init ezkit_init(void)
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+ i2c_register_board_info(0, bfin_i2c_board_info,
+ ARRAY_SIZE(bfin_i2c_board_info));
return 0;
}
/*
- * File: arch/blackfin/mach-bf533/ip0x.c
- * Based on: arch/blackfin/mach-bf533/bf1.c
- * Based on: arch/blackfin/mach-bf533/stamp.c
- * Author: Ivan Danov <idanov@gmail.com>
- * Modified for IP0X David Rowe
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2007 David Rowe
+ * 2006 Intratrade Ltd.
+ * Ivan Danov <idanov@gmail.com>
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2007
- * Description: Board info file for the IP04/IP08 boards, which
- * are derived from the BlackfinOne V2.0 boards.
- *
- * Modified:
- * COpyright 2007 David Rowe
- * Copyright 2006 Intratrade Ltd.
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
.ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */
.enable_dma = 0, /* if 1 - block!!! */
.bits_per_word = 8,
- .cs_change_per_word = 0,
};
#endif
/*
- * File: arch/blackfin/mach-bf533/stamp.c
- * Based on: arch/blackfin/mach-bf533/ezkit.c
- *
Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ *
Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description: Board Info File for the BF533-STAMP
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
static struct resource net2272_bfin_resources[] = {
{
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
.irq = 39,
},
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ {
+ I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+ },
+#endif
};
static const unsigned int cclk_vlev_datasheet[] =
&smc91x_device,
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
&net2272_bfin_device,
#endif
&i2c_gpio_device,
#endif
- &bfin_gpios_device,
-
#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
&stamp_flash_device,
#endif
/*
- * File: arch/blackfin/mach-bf533/dma.c
- * Based on:
- * Author:
+ * simple DMA Implementation for Blackfin
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
+
#include <linux/module.h>
#include <asm/blackfin.h>
/*
- * File: include/asm-blackfin/mach-bf533/bf533.h
- * Based on:
- * Author:
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
*
- * Created:
- * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __MACH_BF533_H__
/*
- * file: include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
*
- * created:
- * description:
- * blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
*/
#include <linux/serial.h>
/*
- * File: include/asm-blackfin/mach-bf533/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _MACH_BLACKFIN_H_
/*
- * File: include/asm-blackfin/mach-bf533/cdefBF532.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF532_H
-/************************************************************************
- *
- * This file is subject to the terms and conditions of the GNU Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Non-GPL License also available as part of VisualDSP++
- * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
- *
- * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
- *
- * This file under source code control, please send bugs or changes to:
- * dsptools.support@analog.com
- *
- ************************************************************************/
/*
- * File: include/asm-blackfin/mach-bf533/defBF532.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
+ * System & MMR bit and Address definitions for ADSP-BF532
*
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
-/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532 */
#ifndef _DEF_BF532_H
#define _DEF_BF532_H
/*
- * File: arch/blackfin/mach-bf533/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
* Copyright (C) 2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/*
- * File: include/asm-blackfin/mach-bf533/defBF532.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _BF533_IRQ_H_
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
/*
- * File: arch/blackfin/mach-bf533/ints-priority.c
- * Based on:
- * Author: Michael Hennerich
+ * Set up the interrupt priorities
*
- * Created: ?
- * Description: Set up the interrupt priorities
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-bf537/boards/cm_bf537.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Bluetechnix
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description: Board description file
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
static struct mtd_partition cm_partitions[] = {
{
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
&cm_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init cm_bf537e_init(void)
/*
- * File: arch/blackfin/mach-bf537/boards/cm_bf537u.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Bluetechnix
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description: Board description file
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
static struct mtd_partition cm_partitions[] = {
{
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
&cm_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init cm_bf537u_init(void)
/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Cambridge Signal Processing
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
+ *
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
/*
- * File: arch/blackfin/mach-bf537/boards/stamp.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- *
Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ *
Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .cs_change_per_word = 0,
.enable_dma = 0,
.bits_per_word = 16,
};
/*
- * File: arch/blackfin/mach-bf537/boards/stamp.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- *
Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ *
Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
static struct resource bfin_pcmcia_cf_resources[] = {
{
};
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
- .name = "bfin-adv7393",
-};
-#endif
-
#if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
#include <asm/bfin-lq035q1.h>
.platform_data = (void *)&adp5588_gpio_data,
},
#endif
+#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
+ {
+ I2C_BOARD_INFO("bfin-adv7393", 0x2B),
+ },
+#endif
};
#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
&bfin_lq035q1_device,
#endif
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
- &bfin_fb_adv7393_device,
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
&bfin_uart_device,
#endif
&bfin_device_gpiokeys,
#endif
- &bfin_gpios_device,
-
#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
&bfin_async_nand_device,
#endif
/*
- * File: arch/blackfin/mach-bf537/boards/tcm_bf537.c
- * Based on: arch/blackfin/mach-bf533/boards/cm_bf537.c
- * Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Bluetechnix
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2005
- * Description: Board description file
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
static struct mtd_partition cm_partitions[] = {
{
#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
&cm_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init tcm_bf537_init(void)
/*
- * File: arch/blackfin/mach-bf537/dma.c
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
+ * Licensed under the GPL-2 or later.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * This file contains the simple DMA Implementation for Blackfin
*/
+
#include <linux/module.h>
#include <asm/blackfin.h>
/*
- * File: include/asm-blackfin/mach-bf537/bf537.h
- * Based on:
- * Author:
+ * System MMR Register and memory map for ADSP-BF537
*
- * Created:
- * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF537
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __MACH_BF537_H__
/*
- * file: include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
*
- * created:
- * description:
- * blackfin serial driver header files
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
*/
#include <linux/serial.h>
/*
- * File: include/asm-blackfin/mach-bf537/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _MACH_BLACKFIN_H_
/*
- * File: include/asm-blackfin/mach-bf537/cdefbf534.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Created:
- * Description: system mmr register map
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF534_H
/*
- * File: include/asm-blackfin/mach-bf537/cdefBF537.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- * System MMR Register Map
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
*/
#ifndef _CDEF_BF537_H
/*
- * File: include/asm-blackfin/mach-bf537/cdefBF537.h
- * Based on:
- * Author:
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF534_H
/*
- * file: include/asm-blackfin/mach-bf537/defbf537.h
- * based on:
- * author:
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * created:
- * description:
- * system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF537_H
/*
- * File: arch/blackfin/mach-bf537/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
* Copyright (C) 2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/*
- * file: include/asm-blackfin/mach-bf537/irq.h
- * based on:
- * author:
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * created:
- * description:
- * system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later
*/
#ifndef _BF537_IRQ_H_
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later
+ */
+
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
/*
- * File: arch/blackfin/mach-bf537/ints-priority.c
- * Based on: arch/blackfin/mach-bf533/ints-priority.c
- * Author: Michael Hennerich
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Created:
- * Description: Set up the interrupt priorities
+ * Licensed under the GPL-2 or later.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Set up the interrupt priorities
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-bf538/boards/ezkit.c
- * Based on: arch/blackfin/mach-bf537/boards/ezkit.c
- *
Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ *
Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2
*/
#include <linux/device.h>
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
- .cs_change_per_word = 0,
};
#endif
#endif
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
#include <linux/gpio_keys.h>
&bfin_device_gpiokeys,
#endif
- &bfin_gpios_device,
-
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&ezkit_flash_device,
#endif
/*
- * File: arch/blackfin/mach-bf538/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
+
#include <linux/module.h>
#include <asm/blackfin.h>
/*
- * File: include/asm-blackfin/mach-bf538/bf538.h
- * Based on: include/asm-blackfin/mach-bf537/bf537.h
- * Author: Michael Hennerich (michael.hennerich@analog.com)
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF538
*
- * Created:
- * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF527
+ * Copyright 2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __MACH_BF538_H__
/*
- * file: include/asm-blackfin/mach-bf538/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * created:
- * description:
- * blackfin serial driver header files
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
*/
#include <linux/serial.h>
/*
- * File: include/asm-blackfin/mach-bf538/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _MACH_BLACKFIN_H_
/*
- * File: include/asm-blackfin/mach-bf538/cdefBF538.h
- * Based on:
- * Author:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CDEF_BF538_H
-/************************************************************************
- *
- * This file is subject to the terms and conditions of the GNU Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Non-GPL License also available as part of VisualDSP++
- * http://www.analog.com/processors/resources/crosscore/visualDspDevSoftware.html
- *
- * (c) Copyright 2001-2005 Analog Devices, Inc. All rights reserved
- *
- * This file under source code control, please send bugs or changes to:
- * dsptools.support@analog.com
- *
- ************************************************************************/
/*
- * File: include/asm-blackfin/mach-bf538/defBF539.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
+
/* SYSTEM & MM REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF538/9 */
#ifndef _DEF_BF539_H
/*
- * File: arch/blackfin/mach-bf538/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
* Copyright (C) 2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
/*
- * file: include/asm-blackfin/mach-bf538/irq.h
- * based on: include/asm-blackfin/mach-bf537/irq.h
- * author: Michael Hennerich (michael.hennerich@analog.com)
+ * Copyright 2008 Analog Devices Inc.
*
- * created:
- * description:
- * system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BF538_IRQ_H_
+/*
+ * Copyright 2008-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
/*
- * File: arch/blackfin/mach-bf538/ints-priority.c
- * Based on: arch/blackfin/mach-bf533/ints-priority.c
- * Author: Michael Hennerich
+ * Set up the interrupt priorities
*
- * Created:
- * Description: Set up the interrupt priorities
+ * Copyright 2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-bf548/boards/cm_bf548.c
- * Based on: arch/blackfin/mach-bf537/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Bluetechnix
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE)
static struct resource bfin_atapi_resources[] = {
{
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
- .cs_change_per_word = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .cs_change_per_word = 0,
.enable_dma = 0,
.bits_per_word = 16,
};
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
¶_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init cm_bf548_init(void)
/*
- * File: arch/blackfin/mach-bf548/boards/ezkit.c
- * Based on: arch/blackfin/mach-bf537/boards/ezkit.c
- *
Author: Aidan Williams <aidan@nicta.com.au>
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ *
Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2005 National ICT Australia (NICTA)
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
#endif
#if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE)
-#include <linux/input.h>
#include <linux/spi/adxl34x.h>
static const struct adxl34x_platform_data adxl34x_info = {
.x_axis_offset = 0,
static struct bfin5xx_spi_chip spi_flash_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
- .cs_change_per_word = 0,
};
#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
- .cs_change_per_word = 0,
.enable_dma = 0,
.bits_per_word = 16,
};
static struct bfin5xx_spi_chip spi_adxl34x_chip_info = {
.enable_dma = 0, /* use dma transfer with this chip*/
.bits_per_word = 8,
- .cs_change_per_word = 0,
};
#endif
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
static const unsigned int cclk_vlev_datasheet[] =
{
/*
&bfin_device_gpiokeys,
#endif
- &bfin_gpios_device,
-
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&ezkit_flash_device,
#endif
/*
- * File: arch/blackfin/mach-bf548/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
/*
- * File: include/asm-blackfin/mach-bf548/bf548.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Created:
- * Description: System MMR register and memory map for ADSP-BF548
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __MACH_BF548_H__
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef BF54X_LQ043_H
#define BF54X_LQ043_H
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _BFIN_KPAD_H
#define _BFIN_KPAD_H
/*
- * file: include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * created:
- * description:
- * blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
*/
#include <linux/serial.h>
/*
- * File: include/asm-blackfin/mach-bf548/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _MACH_BLACKFIN_H_
/*
- * File: include/asm-blackfin/mach-bf548/cdefBF542.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CDEF_BF542_H
/*
- * File: include/asm-blackfin/mach-bf548/cdefBF544.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CDEF_BF544_H
/*
- * File: include/asm-blackfin/mach-bf548/cdefBF547.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CDEF_BF548_H
/*
- * File: include/asm-blackfin/mach-bf548/cdefBF548.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CDEF_BF548_H
/*
- * File: include/asm-blackfin/mach-bf549/cdefBF549.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CDEF_BF549_H
/*
- * File: include/asm-blackfin/mach-bf548/cdefBF54x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CDEF_BF54X_H
/*
- * File: include/asm-blackfin/mach-bf548/defBF542.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF542_H
/*
- * File: include/asm-blackfin/mach-bf548/defBF544.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF544_H
/*
- * File: include/asm-blackfin/mach-bf548/defBF547.h
- * Based on:
- * Author:
+ * Copyright 2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF548_H
/*
- * File: include/asm-blackfin/mach-bf548/defBF548.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF548_H
/*
- * File: include/asm-blackfin/mach-bf548/defBF549.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF549_H
/*
- * File: include/asm-blackfin/mach-bf548/defBF54x_base.h
- * Based on:
- * Author:
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF54X_H
/*
- * File: include/asm-blackfin/mach-bf548/gpio.h
- * Based on:
- * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
- *
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-
-
#define GPIO_PA0 0
#define GPIO_PA1 1
#define GPIO_PA2 2
/*
- * file: include/asm-blackfin/mach-bf548/irq.h
- * based on: include/asm-blackfin/mach-bf537/irq.h
- * author: Roy Huang (roy.huang@analog.com)
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * created:
- * description:
- * system mmr register map
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BF548_IRQ_H_
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
/*
- * File: arch/blackfin/mach-bf537/ints-priority.c
- * Based on: arch/blackfin/mach-bf533/ints-priority.c
- * Author: Michael Hennerich
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Created:
- * Description: Set up the interrupt priorities
+ * Licensed under the GPL-2 or later.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Set up the interrupt priorities
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-bf561/atomic.S
- * Author: Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2008 Analog Devices Inc.
+ * Philippe Gerum <rpm@xenomai.org>
*
- * Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/linkage.h>
/*
- * File: arch/blackfin/mach-bf533/boards/cm_bf561.c
- * Based on: arch/blackfin/mach-bf533/boards/ezkit.c
- * Author: Aidan Williams <aidan@nicta.com.au> Copyright 2005
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2008-2009 Bluetechnix
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created: 2006
- * Description: Board description file
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
static struct resource isp1362_hcd_resources[] = {
{
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
¶_flash_device,
#endif
-
- &bfin_gpios_device,
};
static int __init cm_bf561_init(void)
/*
- * File: arch/blackfin/mach-bf561/ezkit.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/device.h>
};
#endif
-static struct resource bfin_gpios_resources = {
- .start = 0,
- .end = MAX_BLACKFIN_GPIOS - 1,
- .flags = IORESOURCE_IRQ,
-};
-
-static struct platform_device bfin_gpios_device = {
- .name = "simple-gpio",
- .id = -1,
- .num_resources = 1,
- .resource = &bfin_gpios_resources,
-};
-
#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
#include <linux/i2c-gpio.h>
&isp1362_hcd_device,
#endif
- &bfin_gpios_device,
-
#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
&ezkit_flash_device,
#endif
/*
- * File: arch/blackfin/mach-bf561/tepla.c
+ * Copyright 2004-2007 Analog Devices Inc.
+ * 2005 National ICT Australia (NICTA)
+ * Aidan Williams <aidan@nicta.com.au>
*
- * Copyright 2004-2007 Analog Devices Inc.
- * Only SMSC91C1111 was registered, may do more later.
+ * Thanks to Jamey Hicks.
*
- * Copyright 2005 National ICT Australia (NICTA), Aidan Williams <aidan@nicta.com.au>
- * Thanks to Jamey Hicks.
+ * Only SMSC91C1111 was registered, may do more later.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Licensed under the GPL-2
*/
#include <linux/device.h>
return ret;
}
-static struct file_operations coreb_fops = {
+static const struct file_operations coreb_fops = {
.owner = THIS_MODULE,
.ioctl = coreb_ioctl,
};
/*
- * File: arch/blackfin/mach-bf561/dma.c
- * Based on:
- * Author:
+ * the simple DMA Implementation for Blackfin
*
- * Created:
- * Description: This file contains the simple DMA Implementation for Blackfin
+ * Copyright 2007-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
+
#include <linux/module.h>
#include <asm/blackfin.h>
/*
- * File: include/asm-blackfin/mach-bf561/bf561.h
- * Based on:
- * Author:
+ * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
*
- * Created:
- * Description: SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __MACH_BF561_H__
/*
- * file: include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
- * based on:
- * author:
+ * Copyright 2006-2009 Analog Devices Inc.
*
- * created:
- * description:
- * blackfin serial driver head file
- * rev:
- *
- * modified:
- *
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Licensed under the GPL-2 or later.
*/
#include <linux/serial.h>
/*
- * File: include/asm-blackfin/mach-bf561/blackfin.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _MACH_BLACKFIN_H_
/*
- * File: include/asm-blackfin/mach-bf561/cdefBF561.h
- * Based on:
- * Author:
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Created:
- * Description: C POINTERS TO SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _CDEF_BF561_H
-
/*
- * File: include/asm-blackfin/mach-bf561/defBF561.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- * SYSTEM MMR REGISTER AND MEMORY MAP FOR ADSP-BF561
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF561_H
/*
- * File: arch/blackfin/mach-bf561/include/mach/gpio.h
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
* Copyright (C) 2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
-
/*
- * File: include/asm-blackfin/mach-bf561/irq.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Copyright 2005-2008 Analog Devices Inc.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
*/
#ifndef _BF561_IRQ_H_
+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _MACH_PORTMUX_H_
#define _MACH_PORTMUX_H_
+/*
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
#ifndef _MACH_BF561_SMP
#define _MACH_BF561_SMP
/*
- * File: arch/blackfin/mach-bf561/ints-priority.c
- * Based on: arch/blackfin/mach-bf537/ints-priority.c
- * Author: Michael Hennerich
+ * Set up the interrupt priorities
*
- * Created:
- * Description: Set up the interrupt priorities
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-bf561/secondary.S
- * Based on: arch/blackfin/mach-bf561/head.S
- * Author: Philippe Gerum <rpm@xenomai.org>
+ * BF561 coreB bootstrap file
*
- * Copyright 2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Philippe Gerum <rpm@xenomai.org>
*
- * Description: BF561 coreB bootstrap file
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/linkage.h>
/*
- * File: arch/blackfin/mach-bf561/smp.c
- * Author: Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Philippe Gerum <rpm@xenomai.org>
*
- * Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/init.h>
/*
- * File: arch/blackfin/mach-common/arch_checks.c
- * Based on:
- * Author: Robin Getz <rgetz@blackfin.uclinux.org>
+ * Do some checking to make sure things are OK
*
- * Created: 25Jul07
- * Description: Do some checking to make sure things are OK
+ * Copyright 2007-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <asm/fixed_code.h>
*
* Copyright 2004-2009 Analog Devices Inc.
*
- * Enter bugs at http://blackfin.uclinux.org/
- *
* Licensed under the GPL-2 or later.
*/
*
* Copyright 2004-2008 Analog Devices Inc.
*
- * Enter bugs at http://blackfin.uclinux.org/
- *
* Licensed under the GPL-2 or later.
*/
/*
- * File: arch/blackfin/mach-common/cpufreq.c
- * Based on:
- * Author:
+ * Blackfin core clock scaling
*
- * Created:
- * Description: Blackfin core clock scaling
+ * Copyright 2008-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/kernel.h>
/*
- * File: arch/blackfin/mach-common/entry.S
- * Based on:
- * Author: Linus Torvalds
+ * Contains the system-call and fault low-level handling routines.
+ * This also contains the timer-interrupt handler, as well as all
+ * interrupts and faults that can result in a task-switch.
*
- * Created: ?
- * Description: contains the system-call and fault low-level handling routines.
- * This also contains the timer-interrupt handler, as well as all
- * interrupts and faults that can result in a task-switch.
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
/* NOTE: This code handles signal-recognition, which happens every time
*
* Copyright 2004-2008 Analog Devices Inc.
*
- * Enter bugs at http://blackfin.uclinux.org/
- *
* Licensed under the GPL-2 or later.
*/
/*
- * File: arch/blackfin/mach-common/interrupt.S
- * Based on:
- * Author: D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
- * Kenneth Albanowski <kjahds@kjahds.com>
- *
- * Created: ?
- * Description: Interrupt Entries
- *
- * Modified:
- * Copyright 2004-2006 Analog Devices Inc.
+ * Interrupt Entries
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * Copyright 2005-2009 Analog Devices Inc.
+ * D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>
+ * Kenneth Albanowski <kjahds@kjahds.com>
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <asm/blackfin.h>
/*
- * File: arch/blackfin/mach-common/ints-priority.c
+ * Set up the interrupt priorities
*
- * Description: Set up the interrupt priorities
+ * Copyright 2004-2009 Analog Devices Inc.
+ * 2003 Bas Vermeulen <bas@buyways.nl>
+ * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
+ * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
+ * 1999 D. Jeff Dionne <jeff@uclinux.org>
+ * 1996 Roman Zippel
*
- * Modified:
- * 1996 Roman Zippel
- * 1999 D. Jeff Dionne <jeff@uclinux.org>
- * 2000-2001 Lineo, Inc. D. Jefff Dionne <jeff@lineo.ca>
- * 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
- * 2003 Metrowerks/Motorola
- * 2003 Bas Vermeulen <bas@buyways.nl>
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-common/irqpanic.c
- * Based on:
- * Author:
+ * panic kernel with dump information
*
- * Created: ?
- * Description: panic kernel with dump information
+ * Copyright 2005-2009 Analog Devices Inc.
*
- * Modified: rgetz - added cache checking code 14Feb06
- * Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mach-common/pm.c
- * Based on: arm/mach-omap/pm.c
- * Author: Cliff Brake <cbrake@accelent.com> Copyright (c) 2001
+ * Blackfin power management
*
- * Created: 2001
- * Description: Blackfin power management
+ * Copyright 2006-2009 Analog Devices Inc.
*
- * Modified: Nicolas Pitre - PXA250 support
- * Copyright (c) 2002 Monta Vista Software, Inc.
- * David Singleton - OMAP1510
- * Copyright (c) 2002 Monta Vista Software, Inc.
- * Dirk Behme <dirk.behme@de.bosch.com> - OMAP1510/1610
- * Copyright 2004
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2
+ * based on arm/mach-omap/pm.c
+ * Copyright 2001, Cliff Brake <cbrake@accelent.com> and others
*/
#include <linux/suspend.h>
/*
- * File: arch/blackfin/kernel/smp.c
- * Author: Philippe Gerum <rpm@xenomai.org>
- * IPI management based on arch/arm/kernel/smp.c.
+ * IPI management based on arch/arm/kernel/smp.c (Copyright 2002 ARM Limited)
*
- * Copyright 2007 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
+ * Philippe Gerum <rpm@xenomai.org>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2.
*/
#include <linux/module.h>
/*
- * File: arch/blackfin/mm/blackfin_sram.h
- * Based on: arch/blackfin/mm/blackfin_sram.c
- * Author: Mike Frysinger
+ * Local prototypes meant for internal use only
*
- * Created: Aug 2006
- * Description: Local prototypes meant for internal use only
+ * Copyright 2006-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2006 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#ifndef __BLACKFIN_SRAM_H__
/*
- * File: arch/blackfin/mm/init.c
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Created:
- * Description:
- *
- * Modified:
- * Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/swap.h>
/*
- * Description: Instruction SRAM accessor functions for the Blackfin
+ * Instruction SRAM accessor functions for the Blackfin
*
* Copyright 2008 Analog Devices Inc.
*
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later
*/
#define pr_fmt(fmt) "isram: " fmt
/*
- * File: arch/blackfin/mm/sram-alloc.c
- * Based on:
- * Author:
+ * SRAM allocator for Blackfin on-chip memory
*
- * Created:
- * Description: SRAM allocator for Blackfin L1 and L2 memory
+ * Copyright 2004-2009 Analog Devices Inc.
*
- * Modified:
- * Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs: Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
OBJCOPYFLAGS := -O binary -R .note -R .comment -S
-CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
-
KBUILD_AFLAGS += -mlinux -march=$(arch-y) $(inc)
KBUILD_CFLAGS += -mlinux -march=$(arch-y) -pipe $(inc)
KBUILD_CPPFLAGS += $(inc)
#define NUMBER_OF_PORTS 2
-static struct file_operations sync_serial_fops = {
+static const struct file_operations sync_serial_fops = {
.owner = THIS_MODULE,
.write = sync_serial_write,
.read = sync_serial_read,
extern void update_xtime_from_cmos(void);
extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
extern int have_rtc;
unsigned long get_ns_in_jiffie(void)
return 0;
}
-struct file_operations gpio_fops = {
+static const struct file_operations gpio_fops = {
.owner = THIS_MODULE,
.poll = gpio_poll,
.ioctl = gpio_ioctl,
static struct vm_area_struct* flush_vma;
static unsigned long flush_addr;
-extern int setup_irq(int, struct irqaction *);
-
/* Mode registers */
static unsigned long irq_regs[NR_CPUS] = {
regi_irq,
extern void update_xtime_from_cmos(void);
extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
extern int have_rtc;
#ifdef CONFIG_CPU_FREQ
},
};
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
struct crisv32_iopin crisv32_led_net0_green;
struct crisv32_iopin crisv32_led_net0_red;
}
};
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
struct crisv32_iopin crisv32_led_net0_green;
struct crisv32_iopin crisv32_led_net0_red;
/* CRIS PTE bits (see R_TLB_LO in the register description)
*
- * Bit: 31-13 12-------4 3 2 1 0
- * ________________________________________________
- * | pfn | reserved | global | valid | kernel | we |
- * |_____|__________|________|_______|________|_____|
+ * Bit: 31 30-13 12-------4 3 2 1 0
+ * _______________________________________________________
+ * | cache |pfn | reserved | global | valid | kernel | we |
+ * |_______|____|__________|________|_______|________|_____|
*
* (pfn = physical frame number)
*/
#define _PAGE_VALID (1<<2) /* page is valid */
#define _PAGE_SILENT_READ (1<<2) /* synonym */
#define _PAGE_GLOBAL (1<<3) /* global page - context is ignored */
+#define _PAGE_NO_CACHE (1<<31) /* part of the uncached memory map */
/* Bits the HW doesn't care about but the kernel uses them in SW */
/*
* CRISv32 PTE bits:
*
- * Bit: 31-13 12-5 4 3 2 1 0
- * +-----+------+--------+-------+--------+-------+---------+
- * | pfn | zero | global | valid | kernel | write | execute |
- * +-----+------+--------+-------+--------+-------+---------+
+ * Bit: 31 30-13 12-5 4 3 2 1 0
+ * +-------+-----+------+--------+-------+--------+-------+---------+
+ * | cache | pfn | zero | global | valid | kernel | write | execute |
+ * +-------+-----+------+--------+-------+--------+-------+---------+
*/
/*
#define _PAGE_VALID (1 << 3) /* Page is valid. */
#define _PAGE_SILENT_READ (1 << 3) /* Same as above. */
#define _PAGE_GLOBAL (1 << 4) /* Global page. */
+#define _PAGE_NO_CACHE (1 << 31) /* part of the uncached memory map */
+
/*
* The hardware doesn't care about these bits, but the kernel uses them in
#define __ASM_HARDIRQ_H
#include <asm/irq.h>
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
#define HARDIRQ_BITS 8
# error HARDIRQ_BITS is too low!
#endif
+#include <asm-generic/hardirq.h>
+
#endif /* __ASM_HARDIRQ_H */
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{ pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
+#define pgprot_noncached(prot) __pgprot((pgprot_val(prot) | _PAGE_NO_CACHE))
+
/* pte_val refers to a page in the 0x4xxxxxxx physical DRAM interval
* __pte_page(pte_val) refers to the "virtual" DRAM interval
# Makefile for the linux kernel.
#
+CPPFLAGS_vmlinux.lds := -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
extra-y := vmlinux.lds
obj-y := process.o traps.o irq.o ptrace.o setup.o time.o sys_cris.o
#include <asm/io.h>
-void ack_bad_irq(unsigned int irq)
-{
- printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j;
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
_etext = . ; /* End of text section. */
__etext = .;
- . = ALIGN(4); /* Exception table. */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
+ EXCEPTION_TABLE(4)
RODATA
__edata = . ; /* End of data section. */
_edata = . ;
- . = ALIGN(PAGE_SIZE); /* init_task and stack, must be aligned. */
- .data.init_task : { *(.data.init_task) }
+ INIT_TASK_DATA_SECTION(PAGE_SIZE)
. = ALIGN(PAGE_SIZE); /* Init code and data. */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
.init.data : { INIT_DATA }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
+ .init.setup : { INIT_SETUP(16) }
#ifdef CONFIG_ETRAX_ARCH_V32
__start___param = .;
__param : { *(__param) }
__stop___param = .;
#endif
.initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
+ INIT_CALLS
}
.con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ CON_INITCALL
}
SECURITY_INIT
PERCPU(PAGE_SIZE)
.init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
+ INIT_RAM_FS
}
#endif
__init_end = .;
__data_end = . ; /* Move to _edata ? */
- __bss_start = .; /* BSS. */
- .bss : {
- *(COMMON)
- *(.bss)
- }
+ BSS_SECTION(0, 0, 0)
. = ALIGN (0x20);
_end = .;
#ifndef __ASM_HARDIRQ_H
#define __ASM_HARDIRQ_H
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
- unsigned int __softirq_pending;
- unsigned long idle_timestamp;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-#ifdef CONFIG_SMP
-#error SMP not available on FR-V
-#endif /* CONFIG_SMP */
+#include <asm/atomic.h>
extern atomic_t irq_err_count;
static inline void ack_bad_irq(int irq)
{
atomic_inc(&irq_err_count);
}
+#define ack_bad_irq ack_bad_irq
+
+#include <asm-generic/hardirq.h>
#endif
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
/*
* Send us to sleep.
*/
-static int sysctl_pm_do_suspend(ctl_table *ctl, int write, struct file *filp,
+static int sysctl_pm_do_suspend(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *fpos)
{
int retval, mode;
}
-static int cmode_procctl(ctl_table *ctl, int write, struct file *filp,
+static int cmode_procctl(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *fpos)
{
int new_cmode;
if (!write)
- return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+ return proc_dointvec(ctl, write, buffer, lenp, fpos);
new_cmode = user_atoi(buffer, *lenp);
return 0;
}
-static int p0_procctl(ctl_table *ctl, int write, struct file *filp,
+static int p0_procctl(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *fpos)
{
int new_p0;
if (!write)
- return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+ return proc_dointvec(ctl, write, buffer, lenp, fpos);
new_p0 = user_atoi(buffer, *lenp);
return 1;
}
-static int cm_procctl(ctl_table *ctl, int write, struct file *filp,
+static int cm_procctl(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *fpos)
{
int new_cm;
if (!write)
- return proc_dointvec(ctl, write, filp, buffer, lenp, fpos);
+ return proc_dointvec(ctl, write, buffer, lenp, fpos);
new_cm = user_atoi(buffer, *lenp);
*/
void cpu_idle(void)
{
- int cpu = smp_processor_id();
-
/* endless idle loop with no priority at all */
while (1) {
while (!need_resched()) {
- irq_stat[cpu].idle_timestamp = jiffies;
-
check_pgt_cache();
if (!frv_dma_inprogress && idle)
no_signal:
/* Did we come from a system call? */
- if (__frame->syscallno >= 0) {
+ if (__frame->syscallno != -1) {
/* Restart the system call - no handlers present */
switch (__frame->gr8) {
case -ERESTARTNOHAND:
#include <linux/stat.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/syscalls.h>
#include <linux/ipc.h>
obj-y += pci-dma-nommu.o
endif
endif
+
+obj-$(CONFIG_MTD) += flash.o
--- /dev/null
+/* Flash mappings for the MB93090-MB00 motherboard
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define MB93090_BOOTROM_ADDR 0xFF000000 /* Boot ROM */
+#define MB93090_BOOTROM_SIZE (2 * 1024 * 1024)
+#define MB93090_USERROM_ADDR 0xFF200000 /* User ROM */
+#define MB93090_USERROM_SIZE (2 * 1024 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition mb93090_partitions[] = {
+ {
+ .name = "Filesystem",
+ .size = MTDPART_SIZ_FULL,
+ .offset = 0,
+ }
+};
+
+/*
+ * Definition of the MB93090 Boot ROM (on the CPU card)
+ */
+static struct physmap_flash_data mb93090_bootrom_data = {
+ .width = 2,
+ .nr_parts = 2,
+ .parts = mb93090_partitions,
+};
+
+static struct resource mb93090_bootrom_resource = {
+ .start = MB93090_BOOTROM_ADDR,
+ .end = MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_bootrom = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev.platform_data = &mb93090_bootrom_data,
+ .num_resources = 1,
+ .resource = &mb93090_bootrom_resource,
+};
+
+/*
+ * Definition of the MB93090 User ROM definition (on the motherboard)
+ */
+static struct physmap_flash_data mb93090_userrom_data = {
+ .width = 2,
+ .nr_parts = 2,
+ .parts = mb93090_partitions,
+};
+
+static struct resource mb93090_userrom_resource = {
+ .start = MB93090_USERROM_ADDR,
+ .end = MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_userrom = {
+ .name = "physmap-flash",
+ .id = 1,
+ .dev.platform_data = &mb93090_userrom_data,
+ .num_resources = 1,
+ .resource = &mb93090_userrom_resource,
+};
+
+/*
+ * register the MB93090 flashes
+ */
+static int __init mb93090_mtd_init(void)
+{
+ platform_device_register(&mb93090_bootrom);
+ platform_device_register(&mb93090_userrom);
+ return 0;
+}
+
+module_init(mb93090_mtd_init);
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/fs.h>
#include <linux/ipc.h>
#define VMLINUX_SYMBOL(_sym_) _##_sym_
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
/* target memory map */
#ifdef CONFIG_H8300H_GENERIC
SCHED_TEXT
LOCK_TEXT
__etext = . ;
- . = ALIGN(16); /* Exception table */
- ___start___ex_table = .;
- *(__ex_table)
- ___stop___ex_table = .;
}
+ EXCEPTION_TABLE(16)
RODATA
#if defined(CONFIG_ROMKERNEL)
__sdata = . ;
___data_start = . ;
- . = ALIGN(0x2000) ;
- *(.data.init_task)
+ INIT_TASK_DATA(0x2000)
. = ALIGN(0x4) ;
DATA_DATA
. = ALIGN(0x4) ;
__einittext = .;
INIT_DATA
. = ALIGN(0x4) ;
+ INIT_SETUP(0x4)
___setup_start = .;
*(.init.setup)
. = ALIGN(0x4) ;
___setup_end = .;
- ___initcall_start = .;
- INITCALLS
- ___initcall_end = .;
- ___con_initcall_start = .;
- *(.con_initcall.init)
- ___con_initcall_end = .;
+ INIT_CALLS
+ CON_INITCALL
EXIT_TEXT
EXIT_DATA
-#if defined(CONFIG_BLK_DEV_INITRD)
- . = ALIGN(4);
- ___initramfs_start = .;
- *(.init.ramfs)
- ___initramfs_end = .;
-#endif
+ INIT_RAM_FS
. = ALIGN(0x4) ;
___init_end = .;
__edata = . ;
bool
config GENERIC_LOCKBREAK
- bool
- default y
- depends on SMP && PREEMPT
+ def_bool n
config RWSEM_XCHGADD_ALGORITHM
bool
}
-static struct vm_operations_struct ia32_shared_page_vm_ops = {
+static const struct vm_operations_struct ia32_shared_page_vm_ops = {
.fault = ia32_install_shared_page
};
-static struct vm_operations_struct ia32_gate_page_vm_ops = {
+static const struct vm_operations_struct ia32_gate_page_vm_ops = {
.fault = ia32_install_gate_page
};
#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
+#ifdef CONFIG_ACPI
#define acpi_disabled 0 /* ACPI always enabled on IA64 */
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
+#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
#else /* CONFIG_SMP */
#define __raw_spin_lock_init(x) ((x)->lock = 0)
-#ifdef ASM_SUPPORTED
/*
- * Try to get the lock. If we fail to get the lock, make a non-standard call to
- * ia64_spinlock_contention(). We do not use a normal call because that would force all
- * callers of __raw_spin_lock() to be non-leaf routines. Instead, ia64_spinlock_contention() is
- * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered".
+ * Ticket locks are conceptually two parts, one indicating the current head of
+ * the queue, and the other indicating the current tail. The lock is acquired
+ * by atomically noting the tail and incrementing it by one (thus adding
+ * ourself to the queue and noting our position), then waiting until the head
+ * becomes equal to the the initial value of the tail.
+ * The pad bits in the middle are used to prevent the next_ticket number
+ * overflowing into the now_serving number.
+ *
+ * 31 17 16 15 14 0
+ * +----------------------------------------------------+
+ * | now_serving | padding | next_ticket |
+ * +----------------------------------------------------+
*/
-#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+#define TICKET_SHIFT 17
+#define TICKET_BITS 15
+#define TICKET_MASK ((1 << TICKET_BITS) - 1)
-static inline void
-__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags)
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
{
- register volatile unsigned int *ptr asm ("r31") = &lock->lock;
-
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-# ifdef CONFIG_ITANIUM
- /* don't use brl on Itanium... */
- asm volatile ("{\n\t"
- " mov ar.ccv = r0\n\t"
- " mov r28 = ip\n\t"
- " mov r30 = 1;;\n\t"
- "}\n\t"
- "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
- "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
- "cmp4.ne p14, p0 = r30, r0\n\t"
- "mov b6 = r29;;\n\t"
- "mov r27=%2\n\t"
- "(p14) br.cond.spnt.many b6"
- : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
- asm volatile ("{\n\t"
- " mov ar.ccv = r0\n\t"
- " mov r28 = ip\n\t"
- " mov r30 = 1;;\n\t"
- "}\n\t"
- "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
- "cmp4.ne p14, p0 = r30, r0\n\t"
- "mov r27=%2\n\t"
- "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
- : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#else
-# ifdef CONFIG_ITANIUM
- /* don't use brl on Itanium... */
- /* mis-declare, so we get the entry-point, not it's function descriptor: */
- asm volatile ("mov r30 = 1\n\t"
- "mov r27=%2\n\t"
- "mov ar.ccv = r0;;\n\t"
- "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
- "movl r29 = ia64_spinlock_contention;;\n\t"
- "cmp4.ne p14, p0 = r30, r0\n\t"
- "mov b6 = r29;;\n\t"
- "(p14) br.call.spnt.many b6 = b6"
- : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
- asm volatile ("mov r30 = 1\n\t"
- "mov r27=%2\n\t"
- "mov ar.ccv = r0;;\n\t"
- "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
- "cmp4.ne p14, p0 = r30, r0\n\t"
- "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
- : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#endif
+ int *p = (int *)&lock->lock, ticket, serve;
+
+ ticket = ia64_fetchadd(1, p, acq);
+
+ if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK))
+ return;
+
+ ia64_invala();
+
+ for (;;) {
+ asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(p) : "memory");
+
+ if (!(((serve >> TICKET_SHIFT) ^ ticket) & TICKET_MASK))
+ return;
+ cpu_relax();
+ }
}
-#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
+{
+ int tmp = ACCESS_ONCE(lock->lock);
-/* Unlock by doing an ordered store and releasing the cacheline with nta */
-static inline void __raw_spin_unlock(raw_spinlock_t *x) {
- barrier();
- asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x));
+ if (!(((tmp >> TICKET_SHIFT) ^ tmp) & TICKET_MASK))
+ return ia64_cmpxchg(acq, &lock->lock, tmp, tmp + 1, sizeof (tmp)) == tmp;
+ return 0;
}
-#else /* !ASM_SUPPORTED */
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-# define __raw_spin_lock(x) \
-do { \
- __u32 *ia64_spinlock_ptr = (__u32 *) (x); \
- __u64 ia64_spinlock_val; \
- ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0); \
- if (unlikely(ia64_spinlock_val)) { \
- do { \
- while (*ia64_spinlock_ptr) \
- ia64_barrier(); \
- ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0); \
- } while (ia64_spinlock_val); \
- } \
-} while (0)
-#define __raw_spin_unlock(x) do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0)
-#endif /* !ASM_SUPPORTED */
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
+{
+ unsigned short *p = (unsigned short *)&lock->lock + 1, tmp;
+
+ asm volatile ("ld2.bias %0=[%1]" : "=r"(tmp) : "r"(p));
+ ACCESS_ONCE(*p) = (tmp + 2) & ~1;
+}
+
+static __always_inline void __ticket_spin_unlock_wait(raw_spinlock_t *lock)
+{
+ int *p = (int *)&lock->lock, ticket;
+
+ ia64_invala();
+
+ for (;;) {
+ asm volatile ("ld4.c.nc %0=[%1]" : "=r"(ticket) : "r"(p) : "memory");
+ if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK))
+ return;
+ cpu_relax();
+ }
+}
+
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
+{
+ long tmp = ACCESS_ONCE(lock->lock);
+
+ return !!(((tmp >> TICKET_SHIFT) ^ tmp) & TICKET_MASK);
+}
+
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
+{
+ long tmp = ACCESS_ONCE(lock->lock);
-#define __raw_spin_is_locked(x) ((x)->lock != 0)
-#define __raw_spin_trylock(x) (cmpxchg_acq(&(x)->lock, 0, 1) == 0)
-#define __raw_spin_unlock_wait(lock) \
- do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+ return ((tmp - (tmp >> TICKET_SHIFT)) & TICKET_MASK) > 1;
+}
+
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+ return __ticket_spin_is_locked(lock);
+}
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+ return __ticket_spin_is_contended(lock);
+}
+#define __raw_spin_is_contended __raw_spin_is_contended
+
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+ __ticket_spin_lock(lock);
+}
+
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+ return __ticket_spin_trylock(lock);
+}
+
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+ __ticket_spin_unlock(lock);
+}
+
+static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
+ unsigned long flags)
+{
+ __raw_spin_lock(lock);
+}
+
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+ __ticket_spin_unlock_wait(lock);
+}
#define __raw_read_can_lock(rw) (*(volatile int *)(rw) >= 0)
#define __raw_write_can_lock(rw) (*(volatile int *)(rw) == 0)
/*
* Returns a bitmask of CPUs on Node 'node'.
*/
-#define node_to_cpumask(node) (node_to_cpu_mask[node])
#define cpumask_of_node(node) (&node_to_cpu_mask[node])
/*
#ifdef CONFIG_SMP
#define topology_physical_package_id(cpu) (cpu_data(cpu)->socket_id)
#define topology_core_id(cpu) (cpu_data(cpu)->core_id)
-#define topology_core_siblings(cpu) (cpu_core_map[cpu])
-#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
#define topology_thread_cpumask(cpu) (&per_cpu(cpu_sibling_map, cpu))
#define smt_capable() (smp_num_siblings > 1)
# User may have a custom install script
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install - same as make zlilo
cmd_gate = $(CC) -nostdlib $(GATECFLAGS_$(@F)) -Wl,-T,$(filter-out FORCE,$^) -o $@
GATECFLAGS_gate.so = -shared -s -Wl,-soname=linux-gate.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
$(obj)/gate.so: $(obj)/gate.lds $(obj)/gate.o FORCE
$(call if_changed,gate)
#endif /* CONFIG_IA64_BRL_EMU */
#ifdef CONFIG_SMP
- /*
- * This routine handles spinlock contention. It uses a non-standard calling
- * convention to avoid converting leaf routines into interior routines. Because
- * of this special convention, there are several restrictions:
- *
- * - do not use gp relative variables, this code is called from the kernel
- * and from modules, r1 is undefined.
- * - do not use stacked registers, the caller owns them.
- * - do not use the scratch stack space, the caller owns it.
- * - do not use any registers other than the ones listed below
- *
- * Inputs:
- * ar.pfs - saved CFM of caller
- * ar.ccv - 0 (and available for use)
- * r27 - flags from spin_lock_irqsave or 0. Must be preserved.
- * r28 - available for use.
- * r29 - available for use.
- * r30 - available for use.
- * r31 - address of lock, available for use.
- * b6 - return address
- * p14 - available for use.
- * p15 - used to track flag status.
- *
- * If you patch this code to use more registers, do not forget to update
- * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
- */
-
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-
-GLOBAL_ENTRY(ia64_spinlock_contention_pre3_4)
- .prologue
- .save ar.pfs, r0 // this code effectively has a zero frame size
- .save rp, r28
- .body
- nop 0
- tbit.nz p15,p0=r27,IA64_PSR_I_BIT
- .restore sp // pop existing prologue after next insn
- mov b6 = r28
- .prologue
- .save ar.pfs, r0
- .altrp b6
- .body
- ;;
-(p15) ssm psr.i // reenable interrupts if they were on
- // DavidM says that srlz.d is slow and is not required in this case
-.wait:
- // exponential backoff, kdb, lockmeter etc. go in here
- hint @pause
- ld4 r30=[r31] // don't use ld4.bias; if it's contended, we won't write the word
- nop 0
- ;;
- cmp4.ne p14,p0=r30,r0
-(p14) br.cond.sptk.few .wait
-(p15) rsm psr.i // disable interrupts if we reenabled them
- br.cond.sptk.few b6 // lock is now free, try to acquire
- .global ia64_spinlock_contention_pre3_4_end // for kernprof
-ia64_spinlock_contention_pre3_4_end:
-END(ia64_spinlock_contention_pre3_4)
-
-#else
-
-GLOBAL_ENTRY(ia64_spinlock_contention)
- .prologue
- .altrp b6
- .body
- tbit.nz p15,p0=r27,IA64_PSR_I_BIT
- ;;
-.wait:
-(p15) ssm psr.i // reenable interrupts if they were on
- // DavidM says that srlz.d is slow and is not required in this case
-.wait2:
- // exponential backoff, kdb, lockmeter etc. go in here
- hint @pause
- ld4 r30=[r31] // don't use ld4.bias; if it's contended, we won't write the word
- ;;
- cmp4.ne p14,p0=r30,r0
- mov r30 = 1
-(p14) br.cond.sptk.few .wait2
-(p15) rsm psr.i // disable interrupts if we reenabled them
- ;;
- cmpxchg4.acq r30=[r31], r30, ar.ccv
- ;;
- cmp4.ne p14,p0=r0,r30
-(p14) br.cond.sptk.few .wait
-
- br.ret.sptk.many b6 // lock is now taken
-END(ia64_spinlock_contention)
-
-#endif
#ifdef CONFIG_HOTPLUG_CPU
GLOBAL_ENTRY(ia64_jump_to_sal)
#include <asm/unwind.h>
EXPORT_SYMBOL(unw_init_running);
-#ifdef ASM_SUPPORTED
-# ifdef CONFIG_SMP
-# if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-/*
- * This is not a normal routine and we don't want a function descriptor for it, so we use
- * a fake declaration here.
- */
-extern char ia64_spinlock_contention_pre3_4;
-EXPORT_SYMBOL(ia64_spinlock_contention_pre3_4);
-# else
-/*
- * This is not a normal routine and we don't want a function descriptor for it, so we use
- * a fake declaration here.
- */
-extern char ia64_spinlock_contention;
-EXPORT_SYMBOL(ia64_spinlock_contention);
-# endif
-# endif
-#endif
-
#if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
extern void esi_call_phys (void);
EXPORT_SYMBOL_GPL(esi_call_phys);
struct thread_info thread_info;
} s;
unsigned long stack[KERNEL_STACK_SIZE/sizeof (unsigned long)];
-} init_task_mem asm ("init_task") __attribute__((section(".data.init_task"))) = {{
+} init_task_mem asm ("init_task") __init_task_data =
+ {{
.task = INIT_TASK(init_task_mem.s.task),
.thread_info = INIT_THREAD_INFO(init_task_mem.s.task)
}};
memcpy(current->comm, comm, sizeof(current->comm));
}
+static void
+finish_pt_regs(struct pt_regs *regs, const pal_min_state_area_t *ms,
+ unsigned long *nat)
+{
+ const u64 *bank;
+
+ /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use
+ * pmsa_{xip,xpsr,xfs}
+ */
+ if (ia64_psr(regs)->ic) {
+ regs->cr_iip = ms->pmsa_iip;
+ regs->cr_ipsr = ms->pmsa_ipsr;
+ regs->cr_ifs = ms->pmsa_ifs;
+ } else {
+ regs->cr_iip = ms->pmsa_xip;
+ regs->cr_ipsr = ms->pmsa_xpsr;
+ regs->cr_ifs = ms->pmsa_xfs;
+ }
+ regs->pr = ms->pmsa_pr;
+ regs->b0 = ms->pmsa_br0;
+ regs->ar_rsc = ms->pmsa_rsc;
+ copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, ®s->r1, nat);
+ copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, ®s->r2, nat);
+ copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, ®s->r3, nat);
+ copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, ®s->r8, nat);
+ copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, ®s->r9, nat);
+ copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, ®s->r10, nat);
+ copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, ®s->r11, nat);
+ copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, ®s->r12, nat);
+ copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, ®s->r13, nat);
+ copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, ®s->r14, nat);
+ copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, ®s->r15, nat);
+ if (ia64_psr(regs)->bn)
+ bank = ms->pmsa_bank1_gr;
+ else
+ bank = ms->pmsa_bank0_gr;
+ copy_reg(&bank[16-16], ms->pmsa_nat_bits, ®s->r16, nat);
+ copy_reg(&bank[17-16], ms->pmsa_nat_bits, ®s->r17, nat);
+ copy_reg(&bank[18-16], ms->pmsa_nat_bits, ®s->r18, nat);
+ copy_reg(&bank[19-16], ms->pmsa_nat_bits, ®s->r19, nat);
+ copy_reg(&bank[20-16], ms->pmsa_nat_bits, ®s->r20, nat);
+ copy_reg(&bank[21-16], ms->pmsa_nat_bits, ®s->r21, nat);
+ copy_reg(&bank[22-16], ms->pmsa_nat_bits, ®s->r22, nat);
+ copy_reg(&bank[23-16], ms->pmsa_nat_bits, ®s->r23, nat);
+ copy_reg(&bank[24-16], ms->pmsa_nat_bits, ®s->r24, nat);
+ copy_reg(&bank[25-16], ms->pmsa_nat_bits, ®s->r25, nat);
+ copy_reg(&bank[26-16], ms->pmsa_nat_bits, ®s->r26, nat);
+ copy_reg(&bank[27-16], ms->pmsa_nat_bits, ®s->r27, nat);
+ copy_reg(&bank[28-16], ms->pmsa_nat_bits, ®s->r28, nat);
+ copy_reg(&bank[29-16], ms->pmsa_nat_bits, ®s->r29, nat);
+ copy_reg(&bank[30-16], ms->pmsa_nat_bits, ®s->r30, nat);
+ copy_reg(&bank[31-16], ms->pmsa_nat_bits, ®s->r31, nat);
+}
+
/* On entry to this routine, we are running on the per cpu stack, see
* mca_asm.h. The original stack has not been touched by this event. Some of
* the original stack's registers will be in the RBS on this stack. This stack
u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1];
u64 ar_bspstore = regs->ar_bspstore;
u64 ar_bsp = regs->ar_bspstore + (loadrs >> 16);
- const u64 *bank;
const char *msg;
int cpu = smp_processor_id();
p = (char *)r12 - sizeof(*regs);
old_regs = (struct pt_regs *)p;
memcpy(old_regs, regs, sizeof(*regs));
- /* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use
- * pmsa_{xip,xpsr,xfs}
- */
- if (ia64_psr(regs)->ic) {
- old_regs->cr_iip = ms->pmsa_iip;
- old_regs->cr_ipsr = ms->pmsa_ipsr;
- old_regs->cr_ifs = ms->pmsa_ifs;
- } else {
- old_regs->cr_iip = ms->pmsa_xip;
- old_regs->cr_ipsr = ms->pmsa_xpsr;
- old_regs->cr_ifs = ms->pmsa_xfs;
- }
- old_regs->pr = ms->pmsa_pr;
- old_regs->b0 = ms->pmsa_br0;
old_regs->loadrs = loadrs;
- old_regs->ar_rsc = ms->pmsa_rsc;
old_unat = old_regs->ar_unat;
- copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, &old_regs->r1, &old_unat);
- copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, &old_regs->r2, &old_unat);
- copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, &old_regs->r3, &old_unat);
- copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, &old_regs->r8, &old_unat);
- copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, &old_regs->r9, &old_unat);
- copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, &old_regs->r10, &old_unat);
- copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, &old_regs->r11, &old_unat);
- copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, &old_regs->r12, &old_unat);
- copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, &old_regs->r13, &old_unat);
- copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, &old_regs->r14, &old_unat);
- copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, &old_regs->r15, &old_unat);
- if (ia64_psr(old_regs)->bn)
- bank = ms->pmsa_bank1_gr;
- else
- bank = ms->pmsa_bank0_gr;
- copy_reg(&bank[16-16], ms->pmsa_nat_bits, &old_regs->r16, &old_unat);
- copy_reg(&bank[17-16], ms->pmsa_nat_bits, &old_regs->r17, &old_unat);
- copy_reg(&bank[18-16], ms->pmsa_nat_bits, &old_regs->r18, &old_unat);
- copy_reg(&bank[19-16], ms->pmsa_nat_bits, &old_regs->r19, &old_unat);
- copy_reg(&bank[20-16], ms->pmsa_nat_bits, &old_regs->r20, &old_unat);
- copy_reg(&bank[21-16], ms->pmsa_nat_bits, &old_regs->r21, &old_unat);
- copy_reg(&bank[22-16], ms->pmsa_nat_bits, &old_regs->r22, &old_unat);
- copy_reg(&bank[23-16], ms->pmsa_nat_bits, &old_regs->r23, &old_unat);
- copy_reg(&bank[24-16], ms->pmsa_nat_bits, &old_regs->r24, &old_unat);
- copy_reg(&bank[25-16], ms->pmsa_nat_bits, &old_regs->r25, &old_unat);
- copy_reg(&bank[26-16], ms->pmsa_nat_bits, &old_regs->r26, &old_unat);
- copy_reg(&bank[27-16], ms->pmsa_nat_bits, &old_regs->r27, &old_unat);
- copy_reg(&bank[28-16], ms->pmsa_nat_bits, &old_regs->r28, &old_unat);
- copy_reg(&bank[29-16], ms->pmsa_nat_bits, &old_regs->r29, &old_unat);
- copy_reg(&bank[30-16], ms->pmsa_nat_bits, &old_regs->r30, &old_unat);
- copy_reg(&bank[31-16], ms->pmsa_nat_bits, &old_regs->r31, &old_unat);
+ finish_pt_regs(old_regs, ms, &old_unat);
/* Next stack a struct switch_stack. mca_asm.S built a partial
* switch_stack, copy it and fill in the blanks using pt_regs and
no_mod:
mprintk(KERN_INFO "cpu %d, %s %s, original stack not modified\n",
smp_processor_id(), type, msg);
+ old_unat = regs->ar_unat;
+ finish_pt_regs(regs, ms, &old_unat);
return previous_current;
}
return;
}
- smp_call_function_mask(mm->cpu_vm_mask,
+ smp_call_function_many(mm_cpumask(mm),
(void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
local_irq_disable();
local_finish_flush_tlb_mm(mm);
*/
int no_unaligned_warning;
int unaligned_dump_stack;
-static int noprint_warning;
/*
* For M-unit:
/* watch for command names containing %s */
printk(KERN_WARNING "%s", buf);
} else {
- if (no_unaligned_warning && !noprint_warning) {
- noprint_warning = 1;
- printk(KERN_WARNING "%s(%d) encountered an "
+ if (no_unaligned_warning) {
+ printk_once(KERN_WARNING "%s(%d) encountered an "
"unaligned exception which required\n"
"kernel assistance, which degrades "
"the performance of the application.\n"
* this primitive it can be moved up to a spinaphore.h header.
*/
struct spinaphore {
- atomic_t cur;
+ unsigned long ticket;
+ unsigned long serve;
};
static inline void spinaphore_init(struct spinaphore *ss, int val)
{
- atomic_set(&ss->cur, val);
+ ss->ticket = 0;
+ ss->serve = val;
}
static inline void down_spin(struct spinaphore *ss)
{
- while (unlikely(!atomic_add_unless(&ss->cur, -1, 0)))
- while (atomic_read(&ss->cur) == 0)
- cpu_relax();
+ unsigned long t = ia64_fetchadd(1, &ss->ticket, acq), serve;
+
+ if (time_before(t, ss->serve))
+ return;
+
+ ia64_invala();
+
+ for (;;) {
+ asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+ if (time_before(t, serve))
+ return;
+ cpu_relax();
+ }
}
static inline void up_spin(struct spinaphore *ss)
{
- atomic_add(1, &ss->cur);
+ ia64_fetchadd(1, &ss->serve, rel);
}
static struct spinaphore ptcg_sem;
u64 *prev_pfs_loc; /* state for WAR for old spinlock ool code */
} ia64_backtrace_t;
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-/*
- * Returns non-zero if the PC is in the spinlock contention out-of-line code
- * with non-standard calling sequence (on older compilers).
- */
-static __inline__ int in_old_ool_spinlock_code(unsigned long pc)
-{
- extern const char ia64_spinlock_contention_pre3_4[] __attribute__ ((weak));
- extern const char ia64_spinlock_contention_pre3_4_end[] __attribute__ ((weak));
- unsigned long sc_start = (unsigned long)ia64_spinlock_contention_pre3_4;
- unsigned long sc_end = (unsigned long)ia64_spinlock_contention_pre3_4_end;
- return (sc_start && sc_end && pc >= sc_start && pc < sc_end);
-}
-#else
-/* Newer spinlock code does a proper br.call and works fine with the unwinder */
-#define in_old_ool_spinlock_code(pc) 0
-#endif
-
/* Returns non-zero if the PC is in the Interrupt Vector Table */
static __inline__ int in_ivt_code(unsigned long pc)
{
*/
if (bt->prev_pfs_loc && bt->regs && bt->frame.pfs_loc == bt->prev_pfs_loc)
bt->frame.pfs_loc = &bt->regs->ar_pfs;
- bt->prev_pfs_loc = (in_old_ool_spinlock_code(bt->frame.ip) ? bt->frame.pfs_loc : NULL);
+ bt->prev_pfs_loc = NULL;
return unw_unwind(&bt->frame) == 0;
}
if ((seg | reg) <= 255) {
addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg);
mode = 0;
- } else {
+ } else if (sal_revision >= SAL_VERSION_CODE(3,2)) {
addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg);
mode = 1;
+ } else {
+ return -EINVAL;
}
+
result = ia64_sal_pci_config_read(addr, mode, len, &data);
if (result != 0)
return -EINVAL;
if ((seg | reg) <= 255) {
addr = PCI_SAL_ADDRESS(seg, bus, devfn, reg);
mode = 0;
- } else {
+ } else if (sal_revision >= SAL_VERSION_CODE(3,2)) {
addr = PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg);
mode = 1;
+ } else {
+ return -EINVAL;
}
result = ia64_sal_pci_config_write(addr, mode, len, value);
if (result != 0)
* Additionally note that the struct sn_flush_device_war also has to be
* removed from arch/ia64/sn/include/xtalk/hubdev.h
*/
-static u8 war_implemented = 0;
static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device,
struct sn_flush_device_common *common)
struct sn_flush_device_war *dev_entry;
struct ia64_sal_retval isrv = {0,0,0,0};
- if (!war_implemented) {
- printk(KERN_WARNING "PROM version < 4.50 -- implementing old "
- "PROM flush WAR\n");
- war_implemented = 1;
- }
+ printk_once(KERN_WARNING
+ "PROM version < 4.50 -- implementing old PROM flush WAR\n");
war_list = kzalloc(DEV_PER_WIDGET * sizeof(*war_list), GFP_KERNEL);
BUG_ON(!war_list);
break;
case SN_HWPERF_GET_OBJ_NODE:
- if (a.sz != sizeof(u64) || a.arg < 0) {
+ i = a.arg;
+ if (a.sz != sizeof(u64) || i < 0) {
r = -EINVAL;
goto error;
}
if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) {
- if (a.arg >= nobj) {
+ if (i >= nobj) {
r = -EINVAL;
vfree(objs);
goto error;
}
- if (objs[(i = a.arg)].id != a.arg) {
+ if (objs[i].id != a.arg) {
for (i = 0; i < nobj; i++) {
if (objs[i].id == a.arg)
break;
select HAVE_IDE
select HAVE_OPROFILE
select INIT_ALL_POSSIBLE
+ select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_BZIP2
+ select HAVE_KERNEL_LZMA
config SBUS
bool
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
- piggy.o vmlinux.lds
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
+ vmlinux.bin.lzma head.o misc.o piggy.o vmlinux.lds
OBJECTS = $(obj)/head.o $(obj)/misc.o
$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
$(call if_changed,gzip)
+$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,bzip2)
+
+$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,lzma)
+
CFLAGS_misc.o += -fpic
ifdef CONFIG_MMU
OBJCOPYFLAGS += -R .empty_zero_page
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE
+suffix_$(CONFIG_KERNEL_GZIP) = gz
+suffix_$(CONFIG_KERNEL_BZIP2) = bz2
+suffix_$(CONFIG_KERNEL_LZMA) = lzma
+
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
$(call if_changed,ld)
# User may have a custom install script
-if [ -x /sbin/installkernel ]; then
- exec /sbin/installkernel "$@"
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+ exec /sbin/${INSTALLKERNEL} "$@"
fi
if [ "$2" = "zImage" ]; then
* Adapted for SH by Stuart Menefy, Aug 1999
*
* 2003-02-12: Support M32R by Takeo Takahashi
- * This is based on arch/sh/boot/compressed/misc.c.
*/
-#include <linux/string.h>
-
/*
* gzip declarations
*/
-
-#define OF(args) args
#define STATIC static
#undef memset
#undef memcpy
#define memzero(s, n) memset ((s), 0, (n))
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-static unsigned insize = 0; /* valid bytes in inbuf */
-static unsigned inptr = 0; /* index of next byte to be processed in inbuf */
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
-# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
-#else
-# define Assert(cond,msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
-#endif
-
-static int fill_inbuf(void);
-static void flush_window(void);
static void error(char *m);
-static unsigned char *input_data;
-static int input_len;
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-
#include "m32r_sio.c"
static unsigned long free_mem_ptr;
static unsigned long free_mem_end_ptr;
-#define HEAP_SIZE 0x10000
-
-#include "../../../../lib/inflate.c"
-
-void* memset(void* s, int c, size_t n)
+#ifdef CONFIG_KERNEL_BZIP2
+static void *memset(void *s, int c, size_t n)
{
- int i;
- char *ss = (char*)s;
+ char *ss = s;
- for (i=0;i<n;i++) ss[i] = c;
+ while (n--)
+ *ss++ = c;
return s;
}
+#endif
-void* memcpy(void* __dest, __const void* __src,
- size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i=0;i<__n;i++) d[i] = s[i];
- return __dest;
-}
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-static int fill_inbuf(void)
-{
- if (insize != 0) {
- error("ran out of input data");
- }
-
- inbuf = input_data;
- insize = input_len;
- inptr = 1;
- return inbuf[0];
-}
+#ifdef CONFIG_KERNEL_GZIP
+#define BOOT_HEAP_SIZE 0x10000
+#include "../../../../lib/decompress_inflate.c"
+#endif
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
+#ifdef CONFIG_KERNEL_BZIP2
+#define BOOT_HEAP_SIZE 0x400000
+#include "../../../../lib/decompress_bunzip2.c"
+#endif
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
+#ifdef CONFIG_KERNEL_LZMA
+#define BOOT_HEAP_SIZE 0x10000
+#include "../../../../lib/decompress_unlzma.c"
+#endif
static void error(char *x)
{
while(1); /* Halt */
}
-/* return decompressed size */
void
decompress_kernel(int mmu_on, unsigned char *zimage_data,
unsigned int zimage_len, unsigned long heap)
{
+ unsigned char *input_data = zimage_data;
+ int input_len = zimage_len;
+ unsigned char *output_data;
+
output_data = (unsigned char *)CONFIG_MEMORY_START + 0x2000
+ (mmu_on ? 0x80000000 : 0);
free_mem_ptr = heap;
- free_mem_end_ptr = free_mem_ptr + HEAP_SIZE;
- input_data = zimage_data;
- input_len = zimage_len;
+ free_mem_end_ptr = free_mem_ptr + BOOT_HEAP_SIZE;
- makecrc();
- puts("Uncompressing Linux... ");
- gunzip();
- puts("Ok, booting the kernel.\n");
+ puts("\nDecompressing Linux... ");
+ decompress(input_data, input_len, NULL, NULL, output_data, NULL, error);
+ puts("done.\nBooting the kernel.\n");
}
#define __raw_writew writew
#define __raw_writel writel
+#define ioread8 read
+#define ioread16 readw
+#define ioread32 readl
+#define iowrite8 writeb
+#define iowrite16 writew
+#define iowrite32 writel
+
#define mmiowb()
#define flush_write_buffers() do { } while (0) /* M32R_FIXME */
if (prev != next) {
#ifdef CONFIG_SMP
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_set_cpu(cpu, mm_cpumask(next));
#endif /* CONFIG_SMP */
/* Set MPTB = next->pgd */
*(volatile unsigned long *)MPTB = (unsigned long)next->pgd;
}
#ifdef CONFIG_SMP
else
- if (!cpu_test_and_set(cpu, next->cpu_vm_mask))
+ if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next)))
activate_context(next);
#endif /* CONFIG_SMP */
}
#ifndef _ASM_M32R_PAGE_H
#define _ASM_M32R_PAGE_H
+#include <linux/const.h>
+
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifndef __ASSEMBLY__
#define KSTK_EIP(tsk) ((tsk)->thread.lr)
#define KSTK_ESP(tsk) ((tsk)->thread.sp)
-#define THREAD_SIZE (2*PAGE_SIZE)
-
#define cpu_relax() barrier()
#endif /* _ASM_M32R_PROCESSOR_H */
extern unsigned long send_IPI_mask_phys(cpumask_t, int, int);
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#endif /* not __ASSEMBLY__ */
#define PREEMPT_ACTIVE 0x10000000
+#define THREAD_SIZE (PAGE_SIZE << 1)
+
/*
* macros/functions for gaining access to the thread information structure
*/
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
-#define THREAD_SIZE (2*PAGE_SIZE)
-
/* how to get the thread information struct from C */
static inline struct thread_info *current_thread_info(void)
{
return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
}
-#else /* !__ASSEMBLY__ */
-
-#define THREAD_SIZE 8192
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg
- .macro GET_THREAD_INFO reg
- ldi \reg, #-THREAD_SIZE
- and \reg, sp
- .endm
-
#endif
/*
#define resume_kernel restore_all
#endif
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg) GET_THREAD_INFO reg
+ .macro GET_THREAD_INFO reg
+ ldi \reg, #-THREAD_SIZE
+ and \reg, sp
+ .endm
+
ENTRY(ret_from_fork)
pop r0
bl schedule_tail
/*------------------------------------------------------------------------
* Stack area
*/
- .section .spi
+ .section .init.data, "aw"
ALIGN
.global spi_stack_top
.zero 1024
spi_stack_top:
- .section .spu
+ .section .init.data, "aw"
ALIGN
.global spu_stack_top
.zero 1024
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
EXPORT_SYMBOL(iounmap);
EXPORT_SYMBOL(kernel_thread);
-/* Networking helper routines. */
-/* Delay loops */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(__const_udelay);
-
EXPORT_SYMBOL(strncpy_from_user);
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/smp.h>
void smp_local_timer_interrupt(void);
static void send_IPI_allbutself(int, int);
-static void send_IPI_mask(cpumask_t, int, int);
+static void send_IPI_mask(const struct cpumask *, int, int);
unsigned long send_IPI_mask_phys(cpumask_t, int, int);
/*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/
void smp_send_reschedule(int cpu_id)
{
WARN_ON(cpu_is_offline(cpu_id));
- send_IPI_mask(cpumask_of_cpu(cpu_id), RESCHEDULE_IPI, 1);
+ send_IPI_mask(cpumask_of(cpu_id), RESCHEDULE_IPI, 1);
}
/*==========================================================================*
spin_lock(&flushcache_lock);
mask=cpus_addr(cpumask);
atomic_set_mask(*mask, (atomic_t *)&flushcache_cpumask);
- send_IPI_mask(cpumask, INVALIDATE_CACHE_IPI, 0);
+ send_IPI_mask(&cpumask, INVALIDATE_CACHE_IPI, 0);
_flush_cache_copyback_all();
while (flushcache_cpumask)
mb();
preempt_disable();
cpu_id = smp_processor_id();
mmc = &mm->context[cpu_id];
- cpu_mask = mm->cpu_vm_mask;
+ cpu_mask = *mm_cpumask(mm);
cpu_clear(cpu_id, cpu_mask);
if (*mmc != NO_CONTEXT) {
if (mm == current->mm)
activate_context(mm);
else
- cpu_clear(cpu_id, mm->cpu_vm_mask);
+ cpumask_clear_cpu(cpu_id, mm_cpumask(mm));
local_irq_restore(flags);
}
if (!cpus_empty(cpu_mask))
preempt_disable();
cpu_id = smp_processor_id();
mmc = &mm->context[cpu_id];
- cpu_mask = mm->cpu_vm_mask;
+ cpu_mask = *mm_cpumask(mm);
cpu_clear(cpu_id, cpu_mask);
#ifdef DEBUG_SMP
* We have to send the IPI only to
* CPUs affected.
*/
- send_IPI_mask(cpumask, INVALIDATE_TLB_IPI, 0);
+ send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0);
while (!cpus_empty(flush_cpumask)) {
/* nothing. lockup detection does not belong here */
if (flush_mm == current->active_mm)
activate_context(flush_mm);
else
- cpu_clear(cpu_id, flush_mm->cpu_vm_mask);
+ cpumask_clear_cpu(cpu_id, mm_cpumask(flush_mm));
} else {
unsigned long va = flush_va;
for ( ; ; );
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_IPI_mask(mask, CALL_FUNCTION_IPI, 0);
}
void arch_send_call_function_single_ipi(int cpu)
{
- send_IPI_mask(cpumask_of_cpu(cpu), CALL_FUNC_SINGLE_IPI, 0);
+ send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI, 0);
}
/*==========================================================================*
cpumask = cpu_online_map;
cpu_clear(smp_processor_id(), cpumask);
- send_IPI_mask(cpumask, ipi_num, try);
+ send_IPI_mask(&cpumask, ipi_num, try);
}
/*==========================================================================*
* ---------- --- --------------------------------------------------------
*
*==========================================================================*/
-static void send_IPI_mask(cpumask_t cpumask, int ipi_num, int try)
+static void send_IPI_mask(const struct cpumask *cpumask, int ipi_num, int try)
{
cpumask_t physid_mask, tmp;
int cpu_id, phys_id;
if (num_cpus <= 1) /* NO MP */
return;
- cpus_and(tmp, cpumask, cpu_online_map);
- BUG_ON(!cpus_equal(cpumask, tmp));
+ cpumask_and(&tmp, cpumask, cpu_online_mask);
+ BUG_ON(!cpumask_equal(cpumask, &tmp));
physid_mask = CPU_MASK_NONE;
- for_each_cpu_mask(cpu_id, cpumask){
+ for_each_cpu(cpu_id, cpumask) {
if ((phys_id = cpu_to_physid(cpu_id)) != -1)
cpu_set(phys_id, physid_mask);
}
if (mask & ~physids_coerce(phys_cpu_present_map))
BUG();
- if (ipi_num >= NR_IPIS)
+ if (ipi_num >= NR_IPIS || ipi_num < 0)
BUG();
mask <<= IPI_SHIFT;
for (phys_id = 0 ; phys_id < nr_cpu ; phys_id++)
physid_set(phys_id, phys_cpu_present_map);
#ifndef CONFIG_HOTPLUG_CPU
- cpu_present_map = cpu_possible_map;
+ init_cpu_present(&cpu_possible_map);
#endif
show_mp_info(nr_cpu);
#include <asm/hw_irq.h>
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+/* this needs a better home */
+DEFINE_SPINLOCK(rtc_lock);
+
+#ifdef CONFIG_RTC_DRV_CMOS_MODULE
+EXPORT_SYMBOL(rtc_lock);
+#endif
+#endif /* pc-style 'CMOS' RTC support */
+
#ifdef CONFIG_SMP
extern void smp_local_timer_interrupt(void);
#endif
count = 0;
count = (latch - count) * TICK_SIZE;
- elapsed_time = (count + latch / 2) / latch;
+ elapsed_time = DIV_ROUND_CLOSEST(count, latch);
/* NOTE: LATCH is equal to the "interval" value (= reload count). */
#else /* CONFIG_SMP */
p_count = count;
count = (latch - count) * TICK_SIZE;
- elapsed_time = (count + latch / 2) / latch;
+ elapsed_time = DIV_ROUND_CLOSEST(count, latch);
/* NOTE: LATCH is equal to the "interval" value (= reload count). */
#endif /* CONFIG_SMP */
#elif defined(CONFIG_CHIP_M32310)
bus_clock = boot_cpu_data.bus_clock;
divide = boot_cpu_data.timer_divide;
- latch = (bus_clock/divide + HZ / 2) / HZ;
+ latch = DIV_ROUND_CLOSEST(bus_clock/divide, HZ);
printk("Timer start : latch = %ld\n", latch);
eit_vector[186] = (unsigned long)smp_call_function_interrupt;
eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt;
eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt;
- eit_vector[189] = (unsigned long)smp_call_function_single_interrupt;
- eit_vector[190] = 0;
+ eit_vector[189] = 0; /* CPU_BOOT_IPI */
+ eit_vector[190] = (unsigned long)smp_call_function_single_interrupt;
eit_vector[191] = 0;
#endif
_flush_cache_copyback_all();
#include <asm-generic/vmlinux.lds.h>
#include <asm/addrspace.h>
#include <asm/page.h>
+#include <asm/thread_info.h>
OUTPUT_ARCH(m32r)
#if defined(__LITTLE_ENDIAN__)
#endif
_etext = .; /* End of text section */
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
+ EXCEPTION_TABLE(16)
+ NOTES
RODATA
-
- /* writeable */
- .data : { /* Data */
- *(.spu)
- *(.spi)
- DATA_DATA
- CONSTRUCTORS
- }
-
- . = ALIGN(4096);
- __nosave_begin = .;
- .data_nosave : { *(.data.nosave) }
- . = ALIGN(4096);
- __nosave_end = .;
-
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = .; /* End of data section */
- . = ALIGN(8192); /* init_task */
- .data.init_task : { *(.data.init_task) }
-
/* will be freed after init */
- . = ALIGN(4096); /* Init code and data */
+ . = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : { INIT_DATA }
- . = ALIGN(16);
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
- SECURITY_INIT
- . = ALIGN(4);
- __alt_instructions = .;
- .altinstructions : { *(.altinstructions) }
- __alt_instructions_end = .;
- .altinstr_replacement : { *(.altinstr_replacement) }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : { EXIT_TEXT }
- .exit.data : { EXIT_DATA }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(4096);
- __initramfs_start = .;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
-#endif
-
- PERCPU(4096)
- . = ALIGN(4096);
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
+ PERCPU(PAGE_SIZE)
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
- __bss_start = .; /* BSS */
- .bss : { *(.bss) }
- . = ALIGN(4);
- __bss_stop = .;
+ BSS_SECTION(0, 0, 4)
_end = . ;
{
__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
}
+
+EXPORT_SYMBOL(__delay);
+EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
} mem_prof_t;
static mem_prof_t mem_prof[MAX_NUMNODES];
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
static void __init mem_prof_init(void)
{
unsigned long start_pfn, holes, free_pfn;
/* Node#0 SDRAM */
mp = &mem_prof[0];
mp->start_pfn = PFN_UP(CONFIG_MEMORY_START);
- mp->pages = PFN_DOWN(CONFIG_MEMORY_SIZE);
+ mp->pages = PFN_DOWN(memory_end - memory_start);
mp->holes = 0;
mp->free_pfn = PFN_UP(__pa(_end));
; pmd = pmd_offset(pgd, address);
ld r3, @r3 ; r3: pmd data
- ldi r2, #-4096
beqz r3, 3f ; pmd_none(*pmd) ?
+ and3 r2, r3, #0xfff
+ add3 r2, r2, #-355 ; _KERNPG_TABLE(=0x163)
+ bnez r2, 3f ; pmd_bad(*pmd) ?
+ ldi r2, #-4096
+
; pte = pte_offset(pmd, address);
and r2, r3 ; r2: pte base addr
srl3 r3, r0, #10
ld r1, @r3 ; r1: pmd
beqz r1, 3f ; pmd_none(*pmd) ?
;
- and3 r1, r1, #0xeff
- ldi r4, #611 ; _KERNPG_TABLE(=611)
- bne r1, r4, 3f ; !pmd_bad(*pmd) ?
+ and3 r1, r1, #0x3ff
+ ldi r4, #0x163 ; _KERNPG_TABLE(=0x163)
+ bne r1, r4, 3f ; pmd_bad(*pmd) ?
.fillinsn
4:
config MVME147_SCC
bool "SCC support for MVME147 serial ports"
- depends on MVME147
+ depends on MVME147 && BROKEN
help
This is the driver for the serial ports on the Motorola MVME147
boards. Everyone using one of these boards should say Y here.
config MVME162_SCC
bool "SCC support for MVME162 serial ports"
- depends on MVME16x
+ depends on MVME16x && BROKEN
help
This is the driver for the serial ports on the Motorola MVME162 and
172 boards. Everyone using one of these boards should say Y here.
config BVME6000_SCC
bool "SCC support for BVME6000 serial ports"
- depends on BVME6000
+ depends on BVME6000 && BROKEN
help
This is the driver for the serial ports on the BVME4000 and BVME6000
boards from BVM Ltd. Everyone using one of these boards should say
#ifndef __M68K_HARDIRQ_H
#define __M68K_HARDIRQ_H
-#define HARDIRQ_BITS 8
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+ unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
-#include <asm-generic/hardirq.h>
+#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS 8
#endif
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install - same as make zlilo
*/
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union
-__attribute__((section(".data.init_task"), aligned(THREAD_SIZE)))
- = { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data
+ __attribute__((aligned(THREAD_SIZE))) =
+ { INIT_THREAD_INFO(init_task) };
/* initial task structure */
struct task_struct init_task = INIT_TASK(init_task);
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/ipc.h>
#include <asm/setup.h>
DEFINE(THREAD_FPSTATE, offsetof(struct thread_struct, fpstate));
/* offsets into the pt_regs */
- DEFINE(PT_D0, offsetof(struct pt_regs, d0));
- DEFINE(PT_ORIG_D0, offsetof(struct pt_regs, orig_d0));
- DEFINE(PT_D1, offsetof(struct pt_regs, d1));
- DEFINE(PT_D2, offsetof(struct pt_regs, d2));
- DEFINE(PT_D3, offsetof(struct pt_regs, d3));
- DEFINE(PT_D4, offsetof(struct pt_regs, d4));
- DEFINE(PT_D5, offsetof(struct pt_regs, d5));
- DEFINE(PT_A0, offsetof(struct pt_regs, a0));
- DEFINE(PT_A1, offsetof(struct pt_regs, a1));
- DEFINE(PT_A2, offsetof(struct pt_regs, a2));
- DEFINE(PT_PC, offsetof(struct pt_regs, pc));
- DEFINE(PT_SR, offsetof(struct pt_regs, sr));
+ DEFINE(PT_OFF_D0, offsetof(struct pt_regs, d0));
+ DEFINE(PT_OFF_ORIG_D0, offsetof(struct pt_regs, orig_d0));
+ DEFINE(PT_OFF_D1, offsetof(struct pt_regs, d1));
+ DEFINE(PT_OFF_D2, offsetof(struct pt_regs, d2));
+ DEFINE(PT_OFF_D3, offsetof(struct pt_regs, d3));
+ DEFINE(PT_OFF_D4, offsetof(struct pt_regs, d4));
+ DEFINE(PT_OFF_D5, offsetof(struct pt_regs, d5));
+ DEFINE(PT_OFF_A0, offsetof(struct pt_regs, a0));
+ DEFINE(PT_OFF_A1, offsetof(struct pt_regs, a1));
+ DEFINE(PT_OFF_A2, offsetof(struct pt_regs, a2));
+ DEFINE(PT_OFF_PC, offsetof(struct pt_regs, pc));
+ DEFINE(PT_OFF_SR, offsetof(struct pt_regs, sr));
#ifdef CONFIG_COLDFIRE
/* bitfields are a bit difficult */
- DEFINE(PT_FORMATVEC, offsetof(struct pt_regs, sr) - 2);
+ DEFINE(PT_OFF_FORMATVEC, offsetof(struct pt_regs, sr) - 2);
#else
/* bitfields are a bit difficult */
- DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
+ DEFINE(PT_OFF_VECTOR, offsetof(struct pt_regs, pc) + 4);
#endif
/* signal defines */
ENTRY(buserr)
SAVE_ALL
moveq #-1,%d0
- movel %d0,%sp@(PT_ORIG_D0)
+ movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
jsr buserr_c
addql #4,%sp
ENTRY(trap)
SAVE_ALL
moveq #-1,%d0
- movel %d0,%sp@(PT_ORIG_D0)
+ movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
jsr trap_c
addql #4,%sp
ENTRY(dbginterrupt)
SAVE_ALL
moveq #-1,%d0
- movel %d0,%sp@(PT_ORIG_D0)
+ movel %d0,%sp@(PT_OFF_ORIG_D0)
movel %sp,%sp@- /* stack frame pointer argument */
jsr dbginterrupt_c
addql #4,%sp
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/ipc.h>
#include <linux/fs.h>
totalram_pages++;
pages++;
}
- printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+ printk (KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages * (PAGE_SIZE / 1024));
}
#endif
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
#include <asm/mcfdma.h>
-#include <asm/mcfuart.h>
/***************************************************************************/
.globl inthandler7
badsys:
- movel #-ENOSYS,%sp@(PT_D0)
+ movel #-ENOSYS,%sp@(PT_OFF_D0)
jra ret_from_exception
do_trace:
- movel #-ENOSYS,%sp@(PT_D0) /* needed for strace*/
+ movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
subql #4,%sp
SAVE_SWITCH_STACK
jbsr syscall_trace
RESTORE_SWITCH_STACK
addql #4,%sp
- movel %sp@(PT_ORIG_D0),%d1
+ movel %sp@(PT_OFF_ORIG_D0),%d1
movel #-ENOSYS,%d0
cmpl #NR_syscalls,%d1
jcc 1f
lea sys_call_table, %a0
jbsr %a0@(%d1)
-1: movel %d0,%sp@(PT_D0) /* save the return value */
+1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
jbsr syscall_trace
jbsr set_esp0
addql #4,%sp
- movel %sp@(PT_ORIG_D0),%d0
+ movel %sp@(PT_OFF_ORIG_D0),%d0
movel %sp,%d1 /* get thread_info pointer */
andl #-THREAD_SIZE,%d1
lea sys_call_table,%a0
movel %a0@(%d0), %a0
jbsr %a0@
- movel %d0,%sp@(PT_D0) /* save the return value*/
+ movel %d0,%sp@(PT_OFF_D0) /* save the return value*/
ret_from_exception:
- btst #5,%sp@(PT_SR) /* check if returning to kernel*/
+ btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/
jeq Luser_return /* if so, skip resched, signals*/
Lkernel_return:
*/
inthandler1:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and #0x3ff, %d0
movel %sp,%sp@-
inthandler2:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and #0x3ff, %d0
movel %sp,%sp@-
inthandler3:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and #0x3ff, %d0
movel %sp,%sp@-
inthandler4:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and #0x3ff, %d0
movel %sp,%sp@-
inthandler5:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and #0x3ff, %d0
movel %sp,%sp@-
inthandler6:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and #0x3ff, %d0
movel %sp,%sp@-
inthandler7:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and #0x3ff, %d0
movel %sp,%sp@-
inthandler:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and #0x3ff, %d0
movel %sp,%sp@-
2:
RESTORE_ALL
1:
- moveb %sp@(PT_SR), %d0
+ moveb %sp@(PT_OFF_SR), %d0
and #7, %d0
jhi 2b
.globl inthandler
badsys:
- movel #-ENOSYS,%sp@(PT_D0)
+ movel #-ENOSYS,%sp@(PT_OFF_D0)
jra ret_from_exception
do_trace:
- movel #-ENOSYS,%sp@(PT_D0) /* needed for strace*/
+ movel #-ENOSYS,%sp@(PT_OFF_D0) /* needed for strace*/
subql #4,%sp
SAVE_SWITCH_STACK
jbsr syscall_trace
RESTORE_SWITCH_STACK
addql #4,%sp
- movel %sp@(PT_ORIG_D0),%d1
+ movel %sp@(PT_OFF_ORIG_D0),%d1
movel #-ENOSYS,%d0
cmpl #NR_syscalls,%d1
jcc 1f
lea sys_call_table, %a0
jbsr %a0@(%d1)
-1: movel %d0,%sp@(PT_D0) /* save the return value */
+1: movel %d0,%sp@(PT_OFF_D0) /* save the return value */
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
jbsr syscall_trace
lea sys_call_table,%a0
movel %a0@(%d0), %a0
jbsr %a0@
- movel %d0,%sp@(PT_D0) /* save the return value*/
+ movel %d0,%sp@(PT_OFF_D0) /* save the return value*/
ret_from_exception:
- btst #5,%sp@(PT_SR) /* check if returning to kernel*/
+ btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel*/
jeq Luser_return /* if so, skip resched, signals*/
Lkernel_return:
*/
inthandler:
SAVE_ALL
- movew %sp@(PT_VECTOR), %d0
+ movew %sp@(PT_OFF_VECTOR), %d0
and.l #0x3ff, %d0
lsr.l #0x02, %d0
2:
RESTORE_ALL
1:
- moveb %sp@(PT_SR), %d0
+ moveb %sp@(PT_OFF_SR), %d0
and #7, %d0
jhi 2b
/* check if we need to do software interrupts */
movel %d3,%a0
jbsr %a0@
- movel %d0,%sp@(PT_D0) /* save the return value */
+ movel %d0,%sp@(PT_OFF_D0) /* save the return value */
jra ret_from_exception
1:
- movel #-ENOSYS,%d2 /* strace needs -ENOSYS in PT_D0 */
- movel %d2,PT_D0(%sp) /* on syscall entry */
+ movel #-ENOSYS,%d2 /* strace needs -ENOSYS in PT_OFF_D0 */
+ movel %d2,PT_OFF_D0(%sp) /* on syscall entry */
subql #4,%sp
SAVE_SWITCH_STACK
jbsr syscall_trace
addql #4,%sp
movel %d3,%a0
jbsr %a0@
- movel %d0,%sp@(PT_D0) /* save the return value */
+ movel %d0,%sp@(PT_OFF_D0) /* save the return value */
subql #4,%sp /* dummy return address */
SAVE_SWITCH_STACK
jbsr syscall_trace
ret_from_exception:
move #0x2700,%sr /* disable intrs */
- btst #5,%sp@(PT_SR) /* check if returning to kernel */
+ btst #5,%sp@(PT_OFF_SR) /* check if returning to kernel */
jeq Luser_return /* if so, skip resched, signals */
#ifdef CONFIG_PREEMPT
Lreturn:
move #0x2700,%sr /* disable intrs */
movel sw_usp,%a0 /* get usp */
- movel %sp@(PT_PC),%a0@- /* copy exception program counter */
- movel %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+ movel %sp@(PT_OFF_PC),%a0@- /* copy exception program counter */
+ movel %sp@(PT_OFF_FORMATVEC),%a0@- /* copy exception format/vector/sr */
moveml %sp@,%d1-%d5/%a0-%a2
lea %sp@(32),%sp /* space for 8 regs */
movel %sp@+,%d0
ENTRY(inthandler)
SAVE_ALL
moveq #-1,%d0
- movel %d0,%sp@(PT_ORIG_D0)
+ movel %d0,%sp@(PT_OFF_ORIG_D0)
- movew %sp@(PT_FORMATVEC),%d0 /* put exception # in d0 */
+ movew %sp@(PT_OFF_FORMATVEC),%d0 /* put exception # in d0 */
andl #0x03fc,%d0 /* mask out vector only */
movel %sp,%sp@- /* push regs arg */
ENTRY(fasthandler)
SAVE_LOCAL
- movew %sp@(PT_FORMATVEC),%d0
+ movew %sp@(PT_OFF_FORMATVEC),%d0
andl #0x03fc,%d0 /* mask out vector only */
movel %sp,%sp@- /* push regs arg */
config MICROBLAZE
def_bool y
select HAVE_LMB
+ select USB_ARCH_HAS_EHCI
select ARCH_WANT_OPTIONAL_GPIOLIB
config SWAP
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# r31 holds current when in kernel mode
-KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
LDFLAGS :=
LDFLAGS_vmlinux :=
-LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
head-y := arch/microblaze/kernel/head.o
libs-y += arch/microblaze/lib/
boot := arch/microblaze/boot
+# Are we making a simpleImage.<boardname> target? If so, crack out the boardname
+DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
+
+ifneq ($(DTB),)
+ core-y += $(boot)/
+endif
+
# defines filename extension depending memory management type
ifeq ($(CONFIG_MMU),)
MMU := -nommu
endif
-export MMU
+export MMU DTB
all: linux.bin
+BOOT_TARGETS = linux.bin linux.bin.gz simpleImage.%
+
archclean:
$(Q)$(MAKE) $(clean)=$(boot)
-linux.bin linux.bin.gz: vmlinux
+$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
define archhelp
- echo '* linux.bin - Create raw binary'
- echo ' linux.bin.gz - Create compressed raw binary'
+ echo '* linux.bin - Create raw binary'
+ echo ' linux.bin.gz - Create compressed raw binary'
+ echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in'
+ echo ' - stripped elf with fdt blob
+ echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob'
+ echo ' *_defconfig - Select default config from arch/microblaze/configs'
+ echo ''
+ echo ' Targets with <dt> embed a device tree blob inside the image'
+ echo ' These targets support board with firmware that does not'
+ echo ' support passing a device tree directly. Replace <dt> with the'
+ echo ' name of a dts file from the arch/microblaze/boot/dts/ directory'
+ echo ' (minus the .dts extension).'
endef
# arch/microblaze/boot/Makefile
#
-targets := linux.bin linux.bin.gz
+obj-y += linked_dtb.o
+
+targets := linux.bin linux.bin.gz simpleImage.%
OBJCOPYFLAGS_linux.bin := -O binary
+# Where the DTS files live
+dtstree := $(srctree)/$(src)/dts
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+# Generate system.dtb from $(DTB).dtb
+ifneq ($(DTB),system)
+$(obj)/system.dtb: $(obj)/$(DTB).dtb
+ $(call if_changed,cp)
+endif
+
$(obj)/linux.bin: vmlinux FORCE
[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
$(call if_changed,gzip)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-clean-kernel += linux.bin linux.bin.gz
+quiet_cmd_cp = CP $< $@$2
+ cmd_cp = cat $< >$@$2 || (rm -f $@ && echo false)
+
+quiet_cmd_strip = STRIP $@
+ cmd_strip = $(STRIP) -K _start -K _end -K __log_buf -K _fdt_start vmlinux -o $@
+
+$(obj)/simpleImage.%: vmlinux FORCE
+ $(call if_changed,cp,.unstrip)
+ $(call if_changed,strip)
+ @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
+
+# Rule to build device tree blobs
+DTC = $(objtree)/scripts/dtc/dtc
+
+# Rule to build device tree blobs
+quiet_cmd_dtc = DTC $@
+ cmd_dtc = $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 -p 1024 $(dtstree)/$*.dts
+
+$(obj)/%.dtb: $(dtstree)/%.dts FORCE
+ $(call if_changed,dtc)
+
+clean-kernel += linux.bin linux.bin.gz simpleImage.*
+
+clean-files += *.dtb
--- /dev/null
+../../platform/generic/system.dts
\ No newline at end of file
--- /dev/null
+.section __fdt_blob,"a"
+.incbin "arch/microblaze/boot/system.dtb"
+
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 11:00:02 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 10:28:50 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_KS8842 is not set
+CONFIG_XILINX_EMACLITE=y
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
# CONFIG_KMEMCHECK is not set
CONFIG_EARLY_PRINTK=y
-CONFIG_HEART_BEAT=y
+# CONFIG_HEART_BEAT is not set
CONFIG_DEBUG_BOOTMEM=y
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Tue Aug 18 10:35:30 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 10:29:43 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PHYSMAP_OF is not set
CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_PLATRAM is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_KS8842 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
-CONFIG_HEART_BEAT=y
+# CONFIG_HEART_BEAT is not set
# CONFIG_DEBUG_BOOTMEM is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
--- /dev/null
+#ifndef _ASM_MICROBLAZE_ASM_COMPAT_H
+#define _ASM_MICROBLAZE_ASM_COMPAT_H
+
+#include <asm/types.h>
+
+#ifdef __ASSEMBLY__
+# define stringify_in_c(...) __VA_ARGS__
+# define ASM_CONST(x) x
+#else
+/* This version of stringify will deal with commas... */
+# define __stringify_in_c(...) #__VA_ARGS__
+# define stringify_in_c(...) __stringify_in_c(__VA_ARGS__) " "
+# define __ASM_CONST(x) x##UL
+# define ASM_CONST(x) __ASM_CONST(x)
+#endif
+
+#endif /* _ASM_MICROBLAZE_ASM_COMPAT_H */
#define in_be32(a) __raw_readl((const void __iomem __force *)(a))
#define in_be16(a) __raw_readw(a)
+#define writel_be(v, a) out_be32((__force unsigned *)a, v)
+#define readl_be(a) in_be32((__force unsigned *)a)
+
/*
* Little endian
*/
+++ /dev/null
-#include <asm-generic/ipc.h>
#include <linux/pfn.h>
#include <asm/setup.h>
+#include <asm/asm-compat.h>
#include <linux/const.h>
#ifdef __KERNEL__
#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
+#define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR))
+
#ifndef __ASSEMBLY__
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
void time_init(void);
void init_IRQ(void);
void machine_early_init(const char *cmdline, unsigned int ram,
- unsigned int fdt);
+ unsigned int fdt, unsigned int msr);
void machine_restart(char *cmd);
void machine_shutdown(void);
--- /dev/null
+#ifndef __ASM_MICROBLAZE_SYSCALL_H
+#define __ASM_MICROBLAZE_SYSCALL_H
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <asm/ptrace.h>
+
+/* The system call number is given by the user in R12 */
+static inline long syscall_get_nr(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r12;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ /* TODO. */
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return IS_ERR_VALUE(regs->r3) ? regs->r3 : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r3;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ if (error)
+ regs->r3 = -error;
+ else
+ regs->r3 = val;
+}
+
+static inline microblaze_reg_t microblaze_get_syscall_arg(struct pt_regs *regs,
+ unsigned int n)
+{
+ switch (n) {
+ case 5: return regs->r10;
+ case 4: return regs->r9;
+ case 3: return regs->r8;
+ case 2: return regs->r7;
+ case 1: return regs->r6;
+ case 0: return regs->r5;
+ default:
+ BUG();
+ }
+ return ~0;
+}
+
+static inline void microblaze_set_syscall_arg(struct pt_regs *regs,
+ unsigned int n,
+ unsigned long val)
+{
+ switch (n) {
+ case 5:
+ regs->r10 = val;
+ case 4:
+ regs->r9 = val;
+ case 3:
+ regs->r8 = val;
+ case 2:
+ regs->r7 = val;
+ case 1:
+ regs->r6 = val;
+ case 0:
+ regs->r5 = val;
+ default:
+ BUG();
+ }
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ while (n--)
+ *args++ = microblaze_get_syscall_arg(regs, i++);
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ while (n--)
+ microblaze_set_syscall_arg(regs, i++, *args++);
+}
+
+#endif /* __ASM_MICROBLAZE_SYSCALL_H */
{"7.10.d", 0x0b},
{"7.20.a", 0x0c},
{"7.20.b", 0x0d},
+ {"7.20.c", 0x0e},
/* FIXME There is no keycode defined in MBV for these versions */
{"2.10.a", 0x10},
{"3.00.a", 0x20},
{"spartan3a", 0xa},
{"spartan3an", 0xb},
{"spartan3adsp", 0xc},
+ {"spartan6", 0xd},
+ {"virtex6", 0xe},
/* FIXME There is no key code defined for spartan2 */
{"spartan2", 0xf0},
{NULL, 0},
swi r12, r1, PTO+PT_R0;
tovirt(r1,r1)
- la r15, r0, ret_from_trap-8
/* where the trap should return need -8 to adjust for rtsd r15, 8*/
/* Jump to the appropriate function for the system call number in r12
* (r12 is not preserved), or return an error if r12 is not valid. The LP
* register should point to the location where
* the called function should return. [note that MAKE_SYS_CALL uses label 1] */
- /* See if the system call number is valid. */
+
+ # Step into virtual mode.
+ set_vms;
+ addik r11, r0, 3f
+ rtid r11, 0
+ nop
+3:
+ add r11, r0, CURRENT_TASK /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO /* get thread info */
+ lwi r11, r11, TI_FLAGS /* get flags in thread info */
+ andi r11, r11, _TIF_WORK_SYSCALL_MASK
+ beqi r11, 4f
+
+ addik r3, r0, -ENOSYS
+ swi r3, r1, PTO + PT_R3
+ brlid r15, do_syscall_trace_enter
+ addik r5, r1, PTO + PT_R0
+
+ # do_syscall_trace_enter returns the new syscall nr.
+ addk r12, r0, r3
+ lwi r5, r1, PTO+PT_R5;
+ lwi r6, r1, PTO+PT_R6;
+ lwi r7, r1, PTO+PT_R7;
+ lwi r8, r1, PTO+PT_R8;
+ lwi r9, r1, PTO+PT_R9;
+ lwi r10, r1, PTO+PT_R10;
+4:
+/* Jump to the appropriate function for the system call number in r12
+ * (r12 is not preserved), or return an error if r12 is not valid.
+ * The LP register should point to the location where the called function
+ * should return. [note that MAKE_SYS_CALL uses label 1] */
+ /* See if the system call number is valid */
addi r11, r12, -__NR_syscalls;
- bgei r11,1f;
+ bgei r11,5f;
/* Figure out which function to use for this system call. */
/* Note Microblaze barrel shift is optional, so don't rely on it */
add r12, r12, r12; /* convert num -> ptr */
add r12, r12, r12;
/* Trac syscalls and stored them to r0_ram */
- lwi r3, r12, 0x400 + TOPHYS(r0_ram)
+ lwi r3, r12, 0x400 + r0_ram
addi r3, r3, 1
- swi r3, r12, 0x400 + TOPHYS(r0_ram)
+ swi r3, r12, 0x400 + r0_ram
+
+ # Find and jump into the syscall handler.
+ lwi r12, r12, sys_call_table
+ /* where the trap should return need -8 to adjust for rtsd r15, 8 */
+ la r15, r0, ret_from_trap-8
+ bra r12
- lwi r12, r12, TOPHYS(sys_call_table); /* Function ptr */
- /* Make the system call. to r12*/
- set_vms;
- rtid r12, 0;
- nop;
/* The syscall number is invalid, return an error. */
-1: VM_ON; /* RETURN() expects virtual mode*/
+5:
addi r3, r0, -ENOSYS;
rtsd r15,8; /* looks like a normal subroutine return */
or r0, r0, r0
-/* Entry point used to return from a syscall/trap. */
+/* Entry point used to return from a syscall/trap */
/* We re-enable BIP bit before state restore */
C_ENTRY(ret_from_trap):
set_bip; /* Ints masked for state restore*/
/* See if returning to kernel mode, if so, skip resched &c. */
bnei r11, 2f;
+ /* We're returning to user mode, so check for various conditions that
+ * trigger rescheduling. */
+ # FIXME: Restructure all these flag checks.
+ add r11, r0, CURRENT_TASK; /* Get current task ptr into r11 */
+ lwi r11, r11, TS_THREAD_INFO; /* get thread info */
+ lwi r11, r11, TI_FLAGS; /* get flags in thread info */
+ andi r11, r11, _TIF_WORK_SYSCALL_MASK
+ beqi r11, 1f
+
+ swi r3, r1, PTO + PT_R3
+ swi r4, r1, PTO + PT_R4
+ brlid r15, do_syscall_trace_leave
+ addik r5, r1, PTO + PT_R0
+ lwi r3, r1, PTO + PT_R3
+ lwi r4, r1, PTO + PT_R4
+1:
+
/* We're returning to user mode, so check for various conditions that
* trigger rescheduling. */
/* Get current task ptr into r11 */
nop
mfs r7, rfsr; /* save FSR */
nop
+ mts rfsr, r0; /* Clear sticky fsr */
+ nop
la r12, r0, full_exception
set_vms;
rtbd r12, 0;
#endif
#if 0
- printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
+ printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x " \
+ "ESR=%08x\n",
type, user_mode(regs) ? "user" : "kernel", fsr,
(unsigned int) regs->pc, (unsigned int) regs->esr);
#endif
switch (type & 0x1F) {
case MICROBLAZE_ILL_OPCODE_EXCEPTION:
if (user_mode(regs)) {
- printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
+ pr_debug(KERN_WARNING "Illegal opcode exception " \
+ "in user mode.\n");
_exception(SIGILL, regs, ILL_ILLOPC, addr);
return;
}
- printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
+ printk(KERN_WARNING "Illegal opcode exception " \
+ "in kernel mode.\n");
die("opcode exception", regs, SIGBUS);
break;
case MICROBLAZE_IBUS_EXCEPTION:
if (user_mode(regs)) {
- printk(KERN_WARNING "Instruction bus error exception in user mode.\n");
+ pr_debug(KERN_WARNING "Instruction bus error " \
+ "exception in user mode.\n");
_exception(SIGBUS, regs, BUS_ADRERR, addr);
return;
}
- printk(KERN_WARNING "Instruction bus error exception in kernel mode.\n");
+ printk(KERN_WARNING "Instruction bus error exception " \
+ "in kernel mode.\n");
die("bus exception", regs, SIGBUS);
break;
case MICROBLAZE_DBUS_EXCEPTION:
if (user_mode(regs)) {
- printk(KERN_WARNING "Data bus error exception in user mode.\n");
+ pr_debug(KERN_WARNING "Data bus error exception " \
+ "in user mode.\n");
_exception(SIGBUS, regs, BUS_ADRERR, addr);
return;
}
- printk(KERN_WARNING "Data bus error exception in kernel mode.\n");
+ printk(KERN_WARNING "Data bus error exception " \
+ "in kernel mode.\n");
die("bus exception", regs, SIGBUS);
break;
case MICROBLAZE_DIV_ZERO_EXCEPTION:
if (user_mode(regs)) {
- printk(KERN_WARNING "Divide by zero exception in user mode\n");
- _exception(SIGILL, regs, ILL_ILLOPC, addr);
+ pr_debug(KERN_WARNING "Divide by zero exception " \
+ "in user mode\n");
+ _exception(SIGILL, regs, FPE_INTDIV, addr);
return;
}
- printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
+ printk(KERN_WARNING "Divide by zero exception " \
+ "in kernel mode.\n");
die("Divide by exception", regs, SIGBUS);
break;
case MICROBLAZE_FPU_EXCEPTION:
- printk(KERN_WARNING "FPU exception\n");
+ pr_debug(KERN_WARNING "FPU exception\n");
/* IEEE FP exception */
/* I removed fsr variable and use code var for storing fsr */
if (fsr & FSR_IO)
#ifdef CONFIG_MMU
case MICROBLAZE_PRIVILEGED_EXCEPTION:
- printk(KERN_WARNING "Privileged exception\n");
+ pr_debug(KERN_WARNING "Privileged exception\n");
/* "brk r0,r0" - used as debug breakpoint */
if (get_user(code, (unsigned long *)regs->pc) == 0
&& code == 0x980c0000) {
mfs r1, rmsr
andi r1, r1, ~2
mts rmsr, r1
+/*
+ * Here is checking mechanism which check if Microblaze has msr instructions
+ * We load msr and compare it with previous r1 value - if is the same,
+ * msr instructions works if not - cpu don't have them.
+ */
+ /* r8=0 - I have msr instr, 1 - I don't have them */
+ rsubi r0, r0, 1 /* set the carry bit */
+ msrclr r0, 0x4 /* try to clear it */
+ /* read the carry bit, r8 will be '0' if msrclr exists */
+ addik r8, r0, 0
/* r7 may point to an FDT, or there may be one linked in.
if it's in r7, we've got to save it away ASAP.
* Please see $(ARCH)/mach-$(SUBARCH)/setup.c for
* the function.
*/
- la r8, r0, machine_early_init
- brald r15, r8
+ la r9, r0, machine_early_init
+ brald r15, r9
nop
#ifndef CONFIG_MMU
#define NUM_TO_REG(num) r ## num
#ifdef CONFIG_MMU
-/* FIXME you can't change first load of MSR because there is
- * hardcoded jump bri 4 */
#define RESTORE_STATE \
+ lwi r5, r1, 0; \
+ mts rmsr, r5; \
+ nop; \
lwi r3, r1, PT_R3; \
lwi r4, r1, PT_R4; \
lwi r5, r1, PT_R5; \
lwi r31, r0, TOPHYS(PER_CPU(CURRENT_SAVE)) /* get saved current */
#endif
+ mfs r5, rmsr;
+ nop
+ swi r5, r1, 0;
mfs r3, resr
nop
mfs r4, rear;
addk r8, r17, r0; /* Load exception address */
bralid r15, full_exception; /* Branch to the handler */
nop;
+ mts rfsr, r0; /* Clear sticky fsr */
+ nop
/*
* Trigger execution of the signal handler by enabling
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
-{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
struct task_struct init_task = INIT_TASK(init_task);
EXPORT_SYMBOL(init_task);
regs->pc = pc;
regs->r1 = usp;
regs->pt_mode = 0;
+#ifdef CONFIG_MMU
+ regs->msr |= MSR_UMS;
+#endif
}
#ifdef CONFIG_MMU
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
+#include <linux/elf.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/tracehook.h>
#include <linux/errno.h>
#include <asm/processor.h>
return rval;
}
+asmlinkage long do_syscall_trace_enter(struct pt_regs *regs)
+{
+ long ret = 0;
+
+ secure_computing(regs->r12);
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+ tracehook_report_syscall_entry(regs))
+ /*
+ * Tracing decided this syscall should not happen.
+ * We'll return a bogus call number to get an ENOSYS
+ * error, but leave the original number in regs->regs[0].
+ */
+ ret = -1L;
+
+ if (unlikely(current->audit_context))
+ audit_syscall_entry(EM_XILINX_MICROBLAZE, regs->r12,
+ regs->r5, regs->r6,
+ regs->r7, regs->r8);
+
+ return ret ?: regs->r12;
+}
+
+asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
+{
+ int step;
+
+ if (unlikely(current->audit_context))
+ audit_syscall_exit(AUDITSC_RESULT(regs->r3), regs->r3);
+
+ step = test_thread_flag(TIF_SINGLESTEP);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, step);
+}
+
+#if 0
+static asmlinkage void syscall_trace(void)
+{
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return;
+ if (!(current->ptrace & PT_PTRACED))
+ return;
+ /* The 0x80 provides a way for the tracing parent to distinguish
+ between a syscall stop and SIGTRAP delivery */
+ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
+ ? 0x80 : 0));
+ /*
+ * this isn't the same as continuing with a signal, but it will do
+ * for normal use. strace only continues with a signal if the
+ * stopping signal is not SIGTRAP. -brl
+ */
+ if (current->exit_code) {
+ send_sig(current->exit_code, current, 1);
+ current->exit_code = 0;
+ }
+}
+#endif
+
void ptrace_disable(struct task_struct *child)
{
/* nothing to do */
#endif /* CONFIG_MTD_UCLINUX_EBSS */
void __init machine_early_init(const char *cmdline, unsigned int ram,
- unsigned int fdt)
+ unsigned int fdt, unsigned int msr)
{
unsigned long *src, *dst = (unsigned long *)0x0;
early_printk("New klimit: 0x%08x\n", (unsigned)klimit);
#endif
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+ if (msr)
+ early_printk("!!!Your kernel has setup MSR instruction but "
+ "CPU don't have it %d\n", msr);
+#else
+ if (!msr)
+ early_printk("!!!Your kernel not setup MSR instruction but "
+ "CPU have it %d\n", msr);
+#endif
+
for (src = __ivt_start; src < __ivt_end; src++, dst++)
*dst = *src;
#include <linux/mman.h>
#include <linux/sys.h>
#include <linux/ipc.h>
-#include <linux/utsname.h>
#include <linux/file.h>
#include <linux/module.h>
#include <linux/err.h>
OUTPUT_ARCH(microblaze)
ENTRY(_start)
+#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
jiffies = jiffies_64 + 4;
SECTIONS {
. = CONFIG_KERNEL_START;
- .text : {
+ _start = CONFIG_KERNEL_BASE_ADDR;
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
_text = . ;
_stext = . ;
*(.text .text.*)
}
. = ALIGN (4) ;
- _fdt_start = . ; /* place for fdt blob */
- . = . + 0x4000;
- _fdt_end = . ;
+ __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) {
+ _fdt_start = . ; /* place for fdt blob */
+ *(__fdt_blob) ; /* Any link-placed DTB */
+ . = _fdt_start + 0x4000; /* Pad up to 16kbyte */
+ _fdt_end = . ;
+ }
. = ALIGN(16);
RODATA
- . = ALIGN(16);
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
/*
* sdata2 section can go anywhere, but must be word aligned
* and SDA2_BASE must point to the middle of it
*/
- .sdata2 : {
+ .sdata2 : AT(ADDR(.sdata2) - LOAD_OFFSET) {
_ssrw = .;
. = ALIGN(4096); /* page aligned when MMU used - origin 0x8 */
*(.sdata2)
}
_sdata = . ;
- .data ALIGN (4096) : { /* page aligned when MMU used - origin 0x4 */
- DATA_DATA
- CONSTRUCTORS
- }
- . = ALIGN(32);
- .data.cacheline_aligned : { *(.data.cacheline_aligned) }
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
_edata = . ;
/* Reserve some low RAM for r0 based memory references */
r0_ram = . ;
. = . + 4096; /* a page should be enough */
- /* The initial task */
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
-
/* Under the microblaze ABI, .sdata and .sbss must be contiguous */
. = ALIGN(8);
- .sdata : {
+ .sdata : AT(ADDR(.sdata) - LOAD_OFFSET) {
_ssro = .;
*(.sdata)
}
- .sbss : {
+ .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) {
_ssbss = .;
*(.sbss)
_esbss = .;
__init_begin = .;
- . = ALIGN(4096);
- .init.text : {
- _sinittext = . ;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
- .init.data : {
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
INIT_DATA
}
. = ALIGN(4);
- .init.ivt : {
+ .init.ivt : AT(ADDR(.init.ivt) - LOAD_OFFSET) {
__ivt_start = .;
*(.init.ivt)
__ivt_end = .;
}
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ INIT_SETUP(0)
}
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET ) {
+ INIT_CALLS
}
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ CON_INITCALL
}
SECURITY_INIT
__init_end_before_initramfs = .;
- .init.ramfs ALIGN(4096) : {
+ .init.ramfs ALIGN(4096) : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
__initramfs_start = .;
*(.init.ramfs)
__initramfs_end = .;
}
__init_end = .;
- .bss ALIGN (4096) : { /* page aligned when MMU used */
+ .bss ALIGN (4096) : AT(ADDR(.bss) - LOAD_OFFSET) {
+ /* page aligned when MMU used */
__bss_start = . ;
*(.bss*)
*(COMMON)
totalram_pages++;
pages++;
}
- printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+ printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n",
+ (int)(pages * (PAGE_SIZE / 1024)));
}
#endif
config MIPS_L1_CACHE_SHIFT
int
- default "4" if MACH_DECSTATION || MIKROTIK_RB532
+ default "4" if MACH_DECSTATION || MIKROTIK_RB532 || PMC_MSP4200_EVAL
+ default "6" if MIPS_CPU_SCACHE
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
- default "4" if PMC_MSP4200_EVAL
default "5"
config HAVE_STD_PC_SERIAL_PORT
cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
-ifdef CONFIG_32BIT
-ifdef CONFIG_CPU_LITTLE_ENDIAN
-JIFFIES = jiffies_64
-else
-JIFFIES = jiffies_64 + 4
-endif
-else
-JIFFIES = jiffies_64
-endif
-
#
# Automatically detect the build format. By default we choose
# the elf format according to the load address.
endif
KBUILD_AFLAGS += $(cflags-y)
-KBUILD_CFLAGS += $(cflags-y) \
- -D"VMLINUX_LOAD_ADDRESS=$(load-y)"
+KBUILD_CFLAGS += $(cflags-y)
+KBUILD_CPPFLAGS += -D"VMLINUX_LOAD_ADDRESS=$(load-y)"
+KBUILD_CPPFLAGS += -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
LDFLAGS += -m $(ld-emul)
OBJCOPYFLAGS += --remove-section=.reginfo
-#
-# Choosing incompatible machines durings configuration will result in
-# error messages during linking. Select a default linkscript if
-# none has been choosen above.
-#
-
-CPPFLAGS_vmlinux.lds := \
- $(KBUILD_CFLAGS) \
- -D"LOADADDR=$(load-y)" \
- -D"JIFFIES=$(JIFFIES)" \
- -D"DATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)"
-
head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
libs-y += arch/mips/lib/
#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
#ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
+static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
#endif
au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
/* save channel configurations */
- for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+ for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
- au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
/* halt channel */
au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
/* restore channel configurations */
- for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+ for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
- au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
au_sync();
addr += 0x100; /* next channel base */
}
au_sync();
}
+static void au1x_ic0_maskack(unsigned int irq_nr)
+{
+ unsigned int bit = irq_nr - AU1000_INTC0_INT_BASE;
+
+ au_writel(1 << bit, IC0_WAKECLR);
+ au_writel(1 << bit, IC0_MASKCLR);
+ au_writel(1 << bit, IC0_RISINGCLR);
+ au_writel(1 << bit, IC0_FALLINGCLR);
+ au_sync();
+}
+
+static void au1x_ic1_maskack(unsigned int irq_nr)
+{
+ unsigned int bit = irq_nr - AU1000_INTC1_INT_BASE;
+
+ au_writel(1 << bit, IC1_WAKECLR);
+ au_writel(1 << bit, IC1_MASKCLR);
+ au_writel(1 << bit, IC1_RISINGCLR);
+ au_writel(1 << bit, IC1_FALLINGCLR);
+ au_sync();
+}
+
static int au1x_ic1_setwake(unsigned int irq, unsigned int on)
{
unsigned int bit = irq - AU1000_INTC1_INT_BASE;
/*
* irq_chips for both ICs; this way the mask handlers can be
* as short as possible.
- *
- * NOTE: the ->ack() callback is used by the handle_edge_irq
- * flowhandler only, the ->mask_ack() one by handle_level_irq,
- * so no need for an irq_chip for each type of irq (level/edge).
*/
static struct irq_chip au1x_ic0_chip = {
.name = "Alchemy-IC0",
- .ack = au1x_ic0_ack, /* edge */
+ .ack = au1x_ic0_ack,
.mask = au1x_ic0_mask,
- .mask_ack = au1x_ic0_mask, /* level */
+ .mask_ack = au1x_ic0_maskack,
.unmask = au1x_ic0_unmask,
.set_type = au1x_ic_settype,
};
static struct irq_chip au1x_ic1_chip = {
.name = "Alchemy-IC1",
- .ack = au1x_ic1_ack, /* edge */
+ .ack = au1x_ic1_ack,
.mask = au1x_ic1_mask,
- .mask_ack = au1x_ic1_mask, /* level */
+ .mask_ack = au1x_ic1_maskack,
.unmask = au1x_ic1_unmask,
.set_type = au1x_ic_settype,
.set_wake = au1x_ic1_setwake,
.irq = AU1000_RTC_MATCH2_INT,
.set_next_event = au1x_rtcmatch2_set_next_event,
.set_mode = au1x_rtcmatch2_set_mode,
- .cpumask = CPU_MASK_ALL_PTR,
+ .cpumask = cpu_all_mask,
};
static struct irqaction au1x_rtcmatch2_irqaction = {
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
+ board_pci_idsel = mtx1_pci_idsel;
#endif
/* Initialize sys_pinfunc */
alchemy_gpio_direction_output(211, 1); /* green on */
alchemy_gpio_direction_output(212, 0); /* red off */
- board_pci_idsel = mtx1_pci_idsel;
-
printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
{
u16 chip_id;
int res;
+ u32 *bootcr, val;
#ifdef CONFIG_SERIAL_8250
static struct uart_port uart_port[2];
ar7_wdt_res.end = ar7_wdt_res.start + 0x20;
- res = platform_device_register(&ar7_wdt);
+ bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4);
+ val = *bootcr;
+ iounmap(bootcr);
+
+ /* Register watchdog only if enabled in hardware */
+ if (val & AR7_WDT_HW_ENA)
+ res = platform_device_register(&ar7_wdt);
return res;
}
{
int ret;
- lock_kernel();
ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
iodev_name, &miscdev);
- unlock_kernel();
return ret;
}
obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o
+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += boards/
#include <bcm63xx_cpu.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
-#include <bcm63xx_board.h>
#include <bcm63xx_dev_pci.h>
#include <bcm63xx_dev_enet.h>
#include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_pcmcia.h>
#include <board_bcm963xx.h>
#define PFX "board_bcm963xx: "
{
u32 val;
+ if (board.has_pccard)
+ bcm63xx_pcmcia_register();
+
if (board.has_enet0 &&
!board_get_mac_address(board.enet0.mac_addr))
bcm63xx_enet_register(0, &board.enet0);
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/cpu.h>
+#include <asm/cpu-info.h>
#include <bcm63xx_cpu.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
{
unsigned int tmp, expected_cpu_id;
struct cpuinfo_mips *c = ¤t_cpu_data;
+ unsigned int cpu = smp_processor_id();
/* soc registers location depends on cpu type */
expected_cpu_id = 0;
* BCM6338 as the same PrId as BCM3302 see arch/mips/kernel/cpu-probe.c
*/
case CPU_BCM3302:
+ __cpu_name[cpu] = "Broadcom BCM6338";
expected_cpu_id = BCM6338_CPU_ID;
bcm63xx_regs_base = bcm96338_regs_base;
bcm63xx_irqs = bcm96338_irqs;
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/bootinfo.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static struct resource pcmcia_resources[] = {
+ /* pcmcia registers */
+ {
+ /* start & end filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+
+ /* pcmcia memory zone resources */
+ {
+ .start = BCM_PCMCIA_COMMON_BASE_PA,
+ .end = BCM_PCMCIA_COMMON_END_PA,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = BCM_PCMCIA_ATTR_BASE_PA,
+ .end = BCM_PCMCIA_ATTR_END_PA,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = BCM_PCMCIA_IO_BASE_PA,
+ .end = BCM_PCMCIA_IO_END_PA,
+ .flags = IORESOURCE_MEM,
+ },
+
+ /* PCMCIA irq */
+ {
+ /* start filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+
+ /* declare PCMCIA IO resource also */
+ {
+ .start = BCM_PCMCIA_IO_BASE_PA,
+ .end = BCM_PCMCIA_IO_END_PA,
+ .flags = IORESOURCE_IO,
+ },
+};
+
+static struct bcm63xx_pcmcia_platform_data pd;
+
+static struct platform_device bcm63xx_pcmcia_device = {
+ .name = "bcm63xx_pcmcia",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(pcmcia_resources),
+ .resource = pcmcia_resources,
+ .dev = {
+ .platform_data = &pd,
+ },
+};
+
+static int __init config_pcmcia_cs(unsigned int cs,
+ u32 base, unsigned int size)
+{
+ int ret;
+
+ ret = bcm63xx_set_cs_status(cs, 0);
+ if (!ret)
+ ret = bcm63xx_set_cs_base(cs, base, size);
+ if (!ret)
+ ret = bcm63xx_set_cs_status(cs, 1);
+ return ret;
+}
+
+static const __initdata struct {
+ unsigned int cs;
+ unsigned int base;
+ unsigned int size;
+} pcmcia_cs[3] = {
+ {
+ .cs = MPI_CS_PCMCIA_COMMON,
+ .base = BCM_PCMCIA_COMMON_BASE_PA,
+ .size = BCM_PCMCIA_COMMON_SIZE
+ },
+ {
+ .cs = MPI_CS_PCMCIA_ATTR,
+ .base = BCM_PCMCIA_ATTR_BASE_PA,
+ .size = BCM_PCMCIA_ATTR_SIZE
+ },
+ {
+ .cs = MPI_CS_PCMCIA_IO,
+ .base = BCM_PCMCIA_IO_BASE_PA,
+ .size = BCM_PCMCIA_IO_SIZE
+ },
+};
+
+int __init bcm63xx_pcmcia_register(void)
+{
+ int ret, i;
+
+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+ return 0;
+
+ /* use correct pcmcia ready gpio depending on processor */
+ switch (bcm63xx_get_cpu_id()) {
+ case BCM6348_CPU_ID:
+ pd.ready_gpio = 22;
+ break;
+
+ case BCM6358_CPU_ID:
+ pd.ready_gpio = 18;
+ break;
+
+ default:
+ return -ENODEV;
+ }
+
+ pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
+ pcmcia_resources[0].end = pcmcia_resources[0].start +
+ RSET_PCMCIA_SIZE - 1;
+ pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
+
+ /* configure pcmcia chip selects */
+ for (i = 0; i < 3; i++) {
+ ret = config_pcmcia_cs(pcmcia_cs[i].cs,
+ pcmcia_cs[i].base,
+ pcmcia_cs[i].size);
+ if (ret)
+ goto out_err;
+ }
+
+ return platform_device_register(&bcm63xx_pcmcia_device);
+
+out_err:
+ printk(KERN_ERR "unable to set pcmcia chip select\n");
+ return ret;
+}
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+
+static struct resource uart_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = -1, /* filled at runtime */
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device bcm63xx_uart_device = {
+ .name = "bcm63xx_uart",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(uart_resources),
+ .resource = uart_resources,
+};
+
+int __init bcm63xx_uart_register(void)
+{
+ uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+ uart_resources[0].end = uart_resources[0].start;
+ uart_resources[0].end += RSET_UART_SIZE - 1;
+ uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+ return platform_device_register(&bcm63xx_uart_device);
+}
+arch_initcall(bcm63xx_uart_register);
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+
+static struct resource wdt_resources[] = {
+ {
+ .start = -1, /* filled at runtime */
+ .end = -1, /* filled at runtime */
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device bcm63xx_wdt_device = {
+ .name = "bcm63xx-wdt",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(wdt_resources),
+ .resource = wdt_resources,
+};
+
+int __init bcm63xx_wdt_register(void)
+{
+ wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT);
+ wdt_resources[0].end = wdt_resources[0].start;
+ wdt_resources[0].end += RSET_WDT_SIZE - 1;
+
+ return platform_device_register(&bcm63xx_wdt_device);
+}
+arch_initcall(bcm63xx_wdt_register);
bcm6348_a1_reboot();
printk(KERN_INFO "triggering watchdog soft-reset...\n");
- bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG);
+ reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
+ reg |= SYS_PLL_SOFT_RESET;
+ bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
while (1)
;
}
DEFINE_RWLOCK(octeon_irq_ciu1_rwlock);
DEFINE_SPINLOCK(octeon_irq_msi_lock);
+static int octeon_coreid_for_cpu(int cpu)
+{
+#ifdef CONFIG_SMP
+ return cpu_logical_map(cpu);
+#else
+ return cvmx_get_core_num();
+#endif
+}
+
static void octeon_irq_core_ack(unsigned int irq)
{
unsigned int bit = irq - OCTEON_IRQ_SW0;
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
unsigned long flags;
uint64_t en0;
-#ifdef CONFIG_SMP
int cpu;
write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
for_each_online_cpu(cpu) {
- int coreid = cpu_logical_map(cpu);
+ int coreid = octeon_coreid_for_cpu(cpu);
en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
en0 &= ~(1ull << bit);
cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
*/
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
-#else
- int coreid = cvmx_get_core_num();
- local_irq_save(flags);
- en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
- en0 &= ~(1ull << bit);
- cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0);
- cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
- local_irq_restore(flags);
-#endif
+}
+
+/*
+ * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu0_enable_v2(unsigned int irq)
+{
+ int index = cvmx_get_core_num() * 2;
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+
+ cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
+}
+
+/*
+ * Disable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu0_disable_v2(unsigned int irq)
+{
+ int index = cvmx_get_core_num() * 2;
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+
+ cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
+}
+
+/*
+ * Disable the irq on the all cores for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu0_disable_all_v2(unsigned int irq)
+{
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+ int index;
+ int cpu;
+ for_each_online_cpu(cpu) {
+ index = octeon_coreid_for_cpu(cpu) * 2;
+ cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
+ }
}
#ifdef CONFIG_SMP
static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu;
+ unsigned long flags;
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
- write_lock(&octeon_irq_ciu0_rwlock);
+ write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags);
for_each_online_cpu(cpu) {
- int coreid = cpu_logical_map(cpu);
+ int coreid = octeon_coreid_for_cpu(cpu);
uint64_t en0 =
cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2));
if (cpumask_test_cpu(cpu, dest))
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
- write_unlock(&octeon_irq_ciu0_rwlock);
+ write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags);
return 0;
}
+
+/*
+ * Set affinity for the irq for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static int octeon_irq_ciu0_set_affinity_v2(unsigned int irq,
+ const struct cpumask *dest)
+{
+ int cpu;
+ int index;
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0);
+ for_each_online_cpu(cpu) {
+ index = octeon_coreid_for_cpu(cpu) * 2;
+ if (cpumask_test_cpu(cpu, dest))
+ cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask);
+ else
+ cvmx_write_csr(CVMX_CIU_INTX_EN0_W1C(index), mask);
+ }
+ return 0;
+}
+#endif
+
+/*
+ * Newer octeon chips have support for lockless CIU operation.
+ */
+static struct irq_chip octeon_irq_chip_ciu0_v2 = {
+ .name = "CIU0",
+ .enable = octeon_irq_ciu0_enable_v2,
+ .disable = octeon_irq_ciu0_disable_all_v2,
+ .ack = octeon_irq_ciu0_disable_v2,
+ .eoi = octeon_irq_ciu0_enable_v2,
+#ifdef CONFIG_SMP
+ .set_affinity = octeon_irq_ciu0_set_affinity_v2,
#endif
+};
static struct irq_chip octeon_irq_chip_ciu0 = {
.name = "CIU0",
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
unsigned long flags;
uint64_t en1;
-#ifdef CONFIG_SMP
int cpu;
write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
for_each_online_cpu(cpu) {
- int coreid = cpu_logical_map(cpu);
+ int coreid = octeon_coreid_for_cpu(cpu);
en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
en1 &= ~(1ull << bit);
cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
*/
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
-#else
- int coreid = cvmx_get_core_num();
- local_irq_save(flags);
- en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
- en1 &= ~(1ull << bit);
- cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1);
- cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1));
- local_irq_restore(flags);
-#endif
+}
+
+/*
+ * Enable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu1_enable_v2(unsigned int irq)
+{
+ int index = cvmx_get_core_num() * 2 + 1;
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+
+ cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+}
+
+/*
+ * Disable the irq on the current core for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu1_disable_v2(unsigned int irq)
+{
+ int index = cvmx_get_core_num() * 2 + 1;
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+
+ cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
+}
+
+/*
+ * Disable the irq on the all cores for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static void octeon_irq_ciu1_disable_all_v2(unsigned int irq)
+{
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+ int index;
+ int cpu;
+ for_each_online_cpu(cpu) {
+ index = octeon_coreid_for_cpu(cpu) * 2 + 1;
+ cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
+ }
}
#ifdef CONFIG_SMP
-static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu1_set_affinity(unsigned int irq,
+ const struct cpumask *dest)
{
int cpu;
+ unsigned long flags;
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
- write_lock(&octeon_irq_ciu1_rwlock);
+ write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags);
for_each_online_cpu(cpu) {
- int coreid = cpu_logical_map(cpu);
+ int coreid = octeon_coreid_for_cpu(cpu);
uint64_t en1 =
cvmx_read_csr(CVMX_CIU_INTX_EN1
(coreid * 2 + 1));
* of them are done.
*/
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
- write_unlock(&octeon_irq_ciu1_rwlock);
+ write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags);
+
+ return 0;
+}
+/*
+ * Set affinity for the irq for chips that have the EN*_W1{S,C}
+ * registers.
+ */
+static int octeon_irq_ciu1_set_affinity_v2(unsigned int irq,
+ const struct cpumask *dest)
+{
+ int cpu;
+ int index;
+ u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0);
+ for_each_online_cpu(cpu) {
+ index = octeon_coreid_for_cpu(cpu) * 2 + 1;
+ if (cpumask_test_cpu(cpu, dest))
+ cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask);
+ else
+ cvmx_write_csr(CVMX_CIU_INTX_EN1_W1C(index), mask);
+ }
return 0;
}
#endif
+/*
+ * Newer octeon chips have support for lockless CIU operation.
+ */
+static struct irq_chip octeon_irq_chip_ciu1_v2 = {
+ .name = "CIU0",
+ .enable = octeon_irq_ciu1_enable_v2,
+ .disable = octeon_irq_ciu1_disable_all_v2,
+ .ack = octeon_irq_ciu1_disable_v2,
+ .eoi = octeon_irq_ciu1_enable_v2,
+#ifdef CONFIG_SMP
+ .set_affinity = octeon_irq_ciu1_set_affinity_v2,
+#endif
+};
+
static struct irq_chip octeon_irq_chip_ciu1 = {
.name = "CIU1",
.enable = octeon_irq_ciu1_enable,
void __init arch_init_irq(void)
{
int irq;
+ struct irq_chip *chip0;
+ struct irq_chip *chip1;
#ifdef CONFIG_SMP
/* Set the default affinity to the boot cpu. */
if (NR_IRQS < OCTEON_IRQ_LAST)
pr_err("octeon_irq_init: NR_IRQS is set too low\n");
+ if (OCTEON_IS_MODEL(OCTEON_CN58XX_PASS2_X) ||
+ OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) ||
+ OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X)) {
+ chip0 = &octeon_irq_chip_ciu0_v2;
+ chip1 = &octeon_irq_chip_ciu1_v2;
+ } else {
+ chip0 = &octeon_irq_chip_ciu0;
+ chip1 = &octeon_irq_chip_ciu1;
+ }
+
/* 0 - 15 reserved for i8259 master and slave controller. */
/* 17 - 23 Mips internal */
/* 24 - 87 CIU_INT_SUM0 */
for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) {
- set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu0,
- handle_percpu_irq);
+ set_irq_chip_and_handler(irq, chip0, handle_percpu_irq);
}
/* 88 - 151 CIU_INT_SUM1 */
for (irq = OCTEON_IRQ_WDOG0; irq <= OCTEON_IRQ_RESERVED151; irq++) {
- set_irq_chip_and_handler(irq, &octeon_irq_chip_ciu1,
- handle_percpu_irq);
+ set_irq_chip_and_handler(irq, chip1, handle_percpu_irq);
}
#ifdef CONFIG_PCI_MSI
#ifdef CONFIG_HOTPLUG_CPU
static int is_irq_enabled_on_cpu(unsigned int irq, unsigned int cpu)
{
- unsigned int isset;
-#ifdef CONFIG_SMP
- int coreid = cpu_logical_map(cpu);
-#else
- int coreid = cvmx_get_core_num();
-#endif
+ unsigned int isset;
+ int coreid = octeon_coreid_for_cpu(cpu);
int bit = (irq < OCTEON_IRQ_WDOG0) ?
- irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0;
+ irq - OCTEON_IRQ_WORKQ0 : irq - OCTEON_IRQ_WDOG0;
if (irq < 64) {
isset = (cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)) &
(1ull << bit)) >> bit;
cvmx_write_csr(CVMX_CIU_MBOX_SETX(coreid), action);
}
-static inline void octeon_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void octeon_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu_mask(i, *mask)
octeon_send_ipi_single(i, action);
}
#define FIX_N_COLOURS 8
FIX_CMAP_BEGIN,
#ifdef CONFIG_MIPS_MT_SMTC
- FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS),
+ FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * NR_CPUS * 2),
#else
- FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS,
+ FIX_CMAP_END = FIX_CMAP_BEGIN + (FIX_N_COLOURS * 2),
#endif
#ifdef CONFIG_HIGHMEM
/* reserved pte's for temporary kernel mappings */
#define GCMP_GDB_OFS 0x8000 /* Global Debug Block */
/* Offsets to individual GCMP registers from GCMP base */
-#define GCMPOFS(block, tag, reg) (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS)
+#define GCMPOFS(block, tag, reg) \
+ (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS)
+#define GCMPOFSn(block, tag, reg, n) \
+ (GCMP_##block##_OFS + GCMP_##tag##_##reg##_OFS(n))
#define GCMPGCBOFS(reg) GCMPOFS(GCB, GCB, reg)
+#define GCMPGCBOFSn(reg, n) GCMPOFSn(GCB, GCB, reg, n)
#define GCMPCLCBOFS(reg) GCMPOFS(CLCB, CCB, reg)
#define GCMPCOCBOFS(reg) GCMPOFS(COCB, CCB, reg)
#define GCMPGDBOFS(reg) GCMPOFS(GDB, GDB, reg)
/* GCMP register access */
#define GCMPGCB(reg) REGP(_gcmp_base, GCMPGCBOFS(reg))
+#define GCMPGCBn(reg, n) REGP(_gcmp_base, GCMPGCBOFSn(reg, n))
#define GCMPCLCB(reg) REGP(_gcmp_base, GCMPCLCBOFS(reg))
#define GCMPCOCB(reg) REGP(_gcmp_base, GCMPCOCBOFS(reg))
#define GCMPGDB(reg) REGP(_gcmp_base, GCMPGDBOFS(reg))
#define GCMP_GCB_GCMPB_GCMPBASE_MSK GCMPGCBMSK(GCMPB_GCMPBASE, 17)
#define GCMP_GCB_GCMPB_CMDEFTGT_SHF 0
#define GCMP_GCB_GCMPB_CMDEFTGT_MSK GCMPGCBMSK(GCMPB_CMDEFTGT, 2)
-#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 0
-#define GCMP_GCB_GCMPB_CMDEFTGT_MEM1 1
-#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2
-#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3
+#define GCMP_GCB_GCMPB_CMDEFTGT_DISABLED 0
+#define GCMP_GCB_GCMPB_CMDEFTGT_MEM 1
+#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU1 2
+#define GCMP_GCB_GCMPB_CMDEFTGT_IOCU2 3
#define GCMP_GCB_CCMC_OFS 0x0010 /* Global CM Control */
#define GCMP_GCB_GCSRAP_OFS 0x0020 /* Global CSR Access Privilege */
#define GCMP_GCB_GCSRAP_CMACCESS_SHF 0
#define GCMP_CCB_DBGGROUP_OFS 0x0100 /* DebugBreak Group */
extern int __init gcmp_probe(unsigned long, unsigned long);
-
+extern int __init gcmp_niocu(void);
+extern void __init gcmp_setregion(int, unsigned long, unsigned long, int);
#endif /* _ASM_GCMPREGS_H */
#define _ASM_GICREGS_H
#undef GICISBYTELITTLEENDIAN
-#define GICISWORDLITTLEENDIAN
/* Constants */
#define GIC_POL_POS 1
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
-#ifdef CONFIG_SMP
#define GIC_NUM_INTRS (24 + NR_CPUS * 2)
-#else
-#define GIC_NUM_INTRS 32
-#endif
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
#define USM_VISIBLE_SECTION_SIZE 0x10000
/* Register Map for Shared Section */
-#if defined(CONFIG_CPU_LITTLE_ENDIAN) || defined(GICISWORDLITTLEENDIAN)
#define GIC_SH_CONFIG_OFS 0x0000
/* Shared Global Counter */
#define GIC_SH_COUNTER_31_00_OFS 0x0010
#define GIC_SH_COUNTER_63_32_OFS 0x0014
+#define GIC_SH_REVISIONID_OFS 0x0020
/* Interrupt Polarity */
#define GIC_SH_POL_31_0_OFS 0x0100
(GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + (((vpe) / 32) * 4))
#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32))
+/* Convert an interrupt number to a byte offset/bit for multi-word registers */
+#define GIC_INTR_OFS(intr) (((intr) / 32)*4)
+#define GIC_INTR_BIT(intr) ((intr) % 32)
+
/* Polarity : Reset Value is always 0 */
#define GIC_SH_SET_POLARITY_OFS 0x0100
#define GIC_SET_POLARITY(intr, pol) \
- GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + (((intr) / 32) * 4)), (pol) << ((intr) % 32))
+ GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + \
+ GIC_INTR_OFS(intr)), (pol) << GIC_INTR_BIT(intr))
/* Triggering : Reset Value is always 0 */
#define GIC_SH_SET_TRIGGER_OFS 0x0180
#define GIC_SET_TRIGGER(intr, trig) \
- GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + (((intr) / 32) * 4)), (trig) << ((intr) % 32))
+ GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + \
+ GIC_INTR_OFS(intr)), (trig) << GIC_INTR_BIT(intr))
/* Mask manipulation */
#define GIC_SH_SMASK_OFS 0x0380
-#define GIC_SET_INTR_MASK(intr, val) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32)))
-
+#define GIC_SET_INTR_MASK(intr) \
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + \
+ GIC_INTR_OFS(intr)), 1 << GIC_INTR_BIT(intr))
#define GIC_SH_RMASK_OFS 0x0300
-#define GIC_CLR_INTR_MASK(intr, val) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + (((intr) / 32) * 4)), ((val) << ((intr) % 32)))
+#define GIC_CLR_INTR_MASK(intr) \
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + \
+ GIC_INTR_OFS(intr)), 1 << GIC_INTR_BIT(intr))
/* Register Map for Local Section */
#define GIC_VPE_CTL_OFS 0x0000
#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0000
#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0004
-#else /* CONFIG_CPU_BIG_ENDIAN */
-
-#define GIC_SH_CONFIG_OFS 0x0000
-
-/* Shared Global Counter */
-#define GIC_SH_COUNTER_31_00_OFS 0x0014
-#define GIC_SH_COUNTER_63_32_OFS 0x0010
-
-/* Interrupt Polarity */
-#define GIC_SH_POL_31_0_OFS 0x0104
-#define GIC_SH_POL_63_32_OFS 0x0100
-#define GIC_SH_POL_95_64_OFS 0x010c
-#define GIC_SH_POL_127_96_OFS 0x0108
-#define GIC_SH_POL_159_128_OFS 0x0114
-#define GIC_SH_POL_191_160_OFS 0x0110
-#define GIC_SH_POL_223_192_OFS 0x011c
-#define GIC_SH_POL_255_224_OFS 0x0118
-
-/* Edge/Level Triggering */
-#define GIC_SH_TRIG_31_0_OFS 0x0184
-#define GIC_SH_TRIG_63_32_OFS 0x0180
-#define GIC_SH_TRIG_95_64_OFS 0x018c
-#define GIC_SH_TRIG_127_96_OFS 0x0188
-#define GIC_SH_TRIG_159_128_OFS 0x0194
-#define GIC_SH_TRIG_191_160_OFS 0x0190
-#define GIC_SH_TRIG_223_192_OFS 0x019c
-#define GIC_SH_TRIG_255_224_OFS 0x0198
-
-/* Dual Edge Triggering */
-#define GIC_SH_DUAL_31_0_OFS 0x0204
-#define GIC_SH_DUAL_63_32_OFS 0x0200
-#define GIC_SH_DUAL_95_64_OFS 0x020c
-#define GIC_SH_DUAL_127_96_OFS 0x0208
-#define GIC_SH_DUAL_159_128_OFS 0x0214
-#define GIC_SH_DUAL_191_160_OFS 0x0210
-#define GIC_SH_DUAL_223_192_OFS 0x021c
-#define GIC_SH_DUAL_255_224_OFS 0x0218
-
-/* Set/Clear corresponding bit in Edge Detect Register */
-#define GIC_SH_WEDGE_OFS 0x0280
-
-/* Reset Mask - Disables Interrupt */
-#define GIC_SH_RMASK_31_0_OFS 0x0304
-#define GIC_SH_RMASK_63_32_OFS 0x0300
-#define GIC_SH_RMASK_95_64_OFS 0x030c
-#define GIC_SH_RMASK_127_96_OFS 0x0308
-#define GIC_SH_RMASK_159_128_OFS 0x0314
-#define GIC_SH_RMASK_191_160_OFS 0x0310
-#define GIC_SH_RMASK_223_192_OFS 0x031c
-#define GIC_SH_RMASK_255_224_OFS 0x0318
-
-/* Set Mask (WO) - Enables Interrupt */
-#define GIC_SH_SMASK_31_0_OFS 0x0384
-#define GIC_SH_SMASK_63_32_OFS 0x0380
-#define GIC_SH_SMASK_95_64_OFS 0x038c
-#define GIC_SH_SMASK_127_96_OFS 0x0388
-#define GIC_SH_SMASK_159_128_OFS 0x0394
-#define GIC_SH_SMASK_191_160_OFS 0x0390
-#define GIC_SH_SMASK_223_192_OFS 0x039c
-#define GIC_SH_SMASK_255_224_OFS 0x0398
-
-/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
-#define GIC_SH_MASK_31_0_OFS 0x0404
-#define GIC_SH_MASK_63_32_OFS 0x0400
-#define GIC_SH_MASK_95_64_OFS 0x040c
-#define GIC_SH_MASK_127_96_OFS 0x0408
-#define GIC_SH_MASK_159_128_OFS 0x0414
-#define GIC_SH_MASK_191_160_OFS 0x0410
-#define GIC_SH_MASK_223_192_OFS 0x041c
-#define GIC_SH_MASK_255_224_OFS 0x0418
-
-/* Pending Global Interrupts (RO) */
-#define GIC_SH_PEND_31_0_OFS 0x0484
-#define GIC_SH_PEND_63_32_OFS 0x0480
-#define GIC_SH_PEND_95_64_OFS 0x048c
-#define GIC_SH_PEND_127_96_OFS 0x0488
-#define GIC_SH_PEND_159_128_OFS 0x0494
-#define GIC_SH_PEND_191_160_OFS 0x0490
-#define GIC_SH_PEND_223_192_OFS 0x049c
-#define GIC_SH_PEND_255_224_OFS 0x0498
-
-#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500
-
-/* Maps Interrupt X to a Pin */
-#define GIC_SH_MAP_TO_PIN(intr) \
- (GIC_SH_INTR_MAP_TO_PIN_BASE_OFS + (4 * intr))
-
-#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2004
-
-/*
- * Maps Interrupt X to a VPE. This is more complex than the LE case, as
- * odd and even registers need to be transposed. It does work - trust me!
- */
-#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
- (GIC_SH_INTR_MAP_TO_VPE_BASE_OFS + (32 * (intr)) + \
- (((((vpe) / 32) ^ 1) - 1) * 4))
-#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32))
-
-/* Polarity */
-#define GIC_SH_SET_POLARITY_OFS 0x0100
-#define GIC_SET_POLARITY(intr, pol) \
- GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_POLARITY_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (pol) << ((intr) % 32))
-
-/* Triggering */
-#define GIC_SH_SET_TRIGGER_OFS 0x0180
-#define GIC_SET_TRIGGER(intr, trig) \
- GICBIS(GIC_REG_ADDR(SHARED, GIC_SH_SET_TRIGGER_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), (trig) << ((intr) % 32))
-
-/* Mask manipulation */
-#define GIC_SH_SMASK_OFS 0x0380
-#define GIC_SET_INTR_MASK(intr, val) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_SMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
-
-#define GIC_SH_RMASK_OFS 0x0300
-#define GIC_CLR_INTR_MASK(intr, val) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
-
-/* Register Map for Local Section */
-#define GIC_VPE_CTL_OFS 0x0000
-#define GIC_VPE_PEND_OFS 0x0004
-#define GIC_VPE_MASK_OFS 0x0008
-#define GIC_VPE_RMASK_OFS 0x000c
-#define GIC_VPE_SMASK_OFS 0x0010
-#define GIC_VPE_WD_MAP_OFS 0x0040
-#define GIC_VPE_COMPARE_MAP_OFS 0x0044
-#define GIC_VPE_TIMER_MAP_OFS 0x0048
-#define GIC_VPE_PERFCTR_MAP_OFS 0x0050
-#define GIC_VPE_SWINT0_MAP_OFS 0x0054
-#define GIC_VPE_SWINT1_MAP_OFS 0x0058
-#define GIC_VPE_OTHER_ADDR_OFS 0x0080
-#define GIC_VPE_WD_CONFIG0_OFS 0x0090
-#define GIC_VPE_WD_COUNT0_OFS 0x0094
-#define GIC_VPE_WD_INITIAL0_OFS 0x0098
-#define GIC_VPE_COMPARE_LO_OFS 0x00a4
-#define GIC_VPE_COMPARE_HI_OFS 0x00a0
-
-#define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100
-#define GIC_VPE_EIC_SS(intr) \
- (GIC_EIC_SHADOW_SET_BASE + (4 * intr))
-
-#define GIC_VPE_EIC_VEC_BASE 0x0800
-#define GIC_VPE_EIC_VEC(intr) \
- (GIC_VPE_EIC_VEC_BASE + (4 * intr))
-
-#define GIC_VPE_TENABLE_NMI_OFS 0x1000
-#define GIC_VPE_TENABLE_YQ_OFS 0x1004
-#define GIC_VPE_TENABLE_INT_31_0_OFS 0x1080
-#define GIC_VPE_TENABLE_INT_63_32_OFS 0x1084
-
-/* User Mode Visible Section Register Map */
-#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0004
-#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0000
-
-#endif /* !LE */
-
/* Masks */
#define GIC_SH_CONFIG_COUNTSTOP_SHF 28
#define GIC_SH_CONFIG_COUNTSTOP_MSK (MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF)
* in building ipi_map.
*/
struct gic_intr_map {
- unsigned int intrnum; /* Ext Intr Num */
unsigned int cpunum; /* Directed to this CPU */
unsigned int pin; /* Directed to this Pin */
unsigned int polarity; /* Polarity : +/- */
unsigned int trigtype; /* Trigger : Edge/Levl */
- unsigned int ipiflag; /* Is used for IPI ? */
+ unsigned int flags; /* Misc flags */
+#define GIC_FLAG_IPI 0x01
+#define GIC_FLAG_TRANSPARENT 0x02
};
extern void gic_init(unsigned long gic_base_addr,
#define AR7_REF_CLOCK 25000000
#define AR7_XTAL_CLOCK 24000000
+/* DCL */
+#define AR7_WDT_HW_ENA 0x10
+
struct plat_cpmac_data {
int reset_bit;
int power_bit;
if ((gpio >= 8) && (gpio <= 15))
return MAKE_IRQ(0, 29); /* shared GPIO208_215 */
+
+ return -ENXIO;
}
#ifdef CONFIG_SOC_AU1100
--- /dev/null
+#ifndef BCM63XX_DEV_PCMCIA_H_
+#define BCM63XX_DEV_PCMCIA_H_
+
+/*
+ * PCMCIA driver platform data
+ */
+struct bcm63xx_pcmcia_platform_data {
+ unsigned int ready_gpio;
+};
+
+int bcm63xx_pcmcia_register(void);
+
+#endif /* BCM63XX_DEV_PCMCIA_H_ */
#define cpu_to_node(cpu) (sn_cpu_info[(cpu)].p_nodeid)
#define parent_node(node) (node)
-#define node_to_cpumask(node) (hub_data(node)->h_cpus)
#define cpumask_of_node(node) (&hub_data(node)->h_cpus)
struct pci_bus;
extern int pcibus_to_node(struct pci_bus *);
-#define pcibus_to_cpumask(bus) (cpu_online_map)
#define cpumask_of_pcibus(bus) (cpu_online_mask)
extern unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
.busy_factor = 32, \
.imbalance_pct = 125, \
.cache_nice_tries = 1, \
- .flags = SD_LOAD_BALANCE \
- | SD_BALANCE_EXEC \
+ .flags = SD_LOAD_BALANCE | \
+ SD_BALANCE_EXEC, \
.last_balance = jiffies, \
.balance_interval = 1, \
.nr_balance_failed = 0, \
#define cpu_has_cache_cdex_p 0
#define cpu_has_cache_cdex_s 0
#define cpu_has_counter 1
-#define cpu_has_dc_aliases 1
+#define cpu_has_dc_aliases (PAGE_SIZE < 0x4000)
#define cpu_has_divec 0
#define cpu_has_dsp 0
#define cpu_has_ejtag 0
#define cpu_has_vce 0
#define cpu_has_vtag_icache 0
#define cpu_has_watch 1
-#define cpu_icache_snoops_remote_store 1
#endif /* __ASM_MACH_LOONGSON_CPU_FEATURE_OVERRIDES_H */
#include <linux/smp.h>
#include <linux/slab.h>
#include <asm/cacheflush.h>
+#include <asm/hazards.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_MIPS_MT_SMTC
#include <asm/mipsmtregs.h>
#ifdef CONFIG_32BIT
#define TLBMISS_HANDLER_SETUP() \
write_c0_context((unsigned long) smp_processor_id() << 25); \
+ back_to_back_c0_hazard(); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
#ifdef CONFIG_64BIT
#define TLBMISS_HANDLER_SETUP() \
write_c0_context((unsigned long) smp_processor_id() << 26); \
+ back_to_back_c0_hazard(); \
TLBMISS_HANDLER_SETUP_PGD(swapper_pg_dir)
#endif
* having ASID_MASK smaller than the hardware maximum,
* make sure no "soft" bits become "hard"...
*/
- write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK)
- | (cpu_context(cpu, next) & ASID_MASK));
+ write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
+ cpu_asid(cpu, next));
ehb(); /* Make sure it propagates to TCStatus */
evpe(mtflags);
#else
- write_c0_entryhi(cpu_context(cpu, next));
+ write_c0_entryhi(cpu_asid(cpu, next));
#endif /* CONFIG_MIPS_MT_SMTC */
TLBMISS_HANDLER_SETUP_PGD(next->pgd);
* Mark current->active_mm as not "active" anymore.
* We don't want to mislead possible IPI tlb flush routines.
*/
- cpu_clear(cpu, prev->cpu_vm_mask);
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
+ cpumask_set_cpu(cpu, mm_cpumask(next));
local_irq_restore(flags);
}
}
/* See comments for similar code above */
write_c0_entryhi((read_c0_entryhi() & ~HW_ASID_MASK) |
- (cpu_context(cpu, next) & ASID_MASK));
+ cpu_asid(cpu, next));
ehb(); /* Make sure it propagates to TCStatus */
evpe(mtflags);
#else
- write_c0_entryhi(cpu_context(cpu, next));
+ write_c0_entryhi(cpu_asid(cpu, next));
#endif /* CONFIG_MIPS_MT_SMTC */
TLBMISS_HANDLER_SETUP_PGD(next->pgd);
/* mark mmu ownership change */
- cpu_clear(cpu, prev->cpu_vm_mask);
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
+ cpumask_set_cpu(cpu, mm_cpumask(next));
local_irq_restore(flags);
}
local_irq_save(flags);
- if (cpu_isset(cpu, mm->cpu_vm_mask)) {
+ if (cpumask_test_cpu(cpu, mm_cpumask(mm))) {
get_new_mmu_context(mm, cpu);
#ifdef CONFIG_MIPS_MT_SMTC
/* See comments for similar code above */
#ifndef _MIPS_SETUP_H
#define _MIPS_SETUP_H
-#define COMMAND_LINE_SIZE 256
+#define COMMAND_LINE_SIZE 4096
#ifdef __KERNEL__
extern void setup_early_printk(void);
struct plat_smp_ops {
void (*send_ipi_single)(int cpu, unsigned int action);
- void (*send_ipi_mask)(cpumask_t mask, unsigned int action);
+ void (*send_ipi_mask)(const struct cpumask *mask, unsigned int action);
void (*init_secondary)(void);
void (*smp_finish)(void);
void (*cpus_done)(void);
extern asmlinkage void smp_call_function_interrupt(void);
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+ extern struct plat_smp_ops *mp_ops; /* private */
+
+ mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
+}
+
+static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+ extern struct plat_smp_ops *mp_ops; /* private */
+
+ mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
+}
#endif /* __ASM_SMP_H */
spinlock_t lock;
struct smtc_ipi *tail;
int depth;
+ int resched_flag; /* reschedule already queued */
};
static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
--- /dev/null
+#ifndef _MIPS_SPRAM_H
+#define _MIPS_SPRAM_H
+
+#ifdef CONFIG_CPU_MIPSR2
+extern __init void spram_config(void);
+#else
+static inline void spram_config(void) { };
+#endif /* CONFIG_CPU_MIPSR2 */
+
+#endif /* _MIPS_SPRAM_H */
#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR
#ifdef CONFIG_DEBUG_STACK_USAGE
-#define alloc_thread_info(tsk) \
-({ \
- struct thread_info *ret; \
- \
- ret = kzalloc(THREAD_SIZE, GFP_KERNEL); \
- \
- ret; \
-})
+#define alloc_thread_info(tsk) kzalloc(THREAD_SIZE, GFP_KERNEL)
#else
#define alloc_thread_info(tsk) kmalloc(THREAD_SIZE, GFP_KERNEL)
#endif
#if defined(__MIPSEB__)
# include <linux/unaligned/be_struct.h>
# include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
# define get_unaligned __get_unaligned_be
# define put_unaligned __put_unaligned_be
#elif defined(__MIPSEL__)
# include <linux/unaligned/le_struct.h>
# include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
# define get_unaligned __get_unaligned_le
# define put_unaligned __put_unaligned_le
#else
# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
#endif
+# include <linux/unaligned/generic.h>
+
#endif /* _ASM_MIPS_UNALIGNED_H */
static struct irqaction r4030_timer_irqaction = {
.handler = r4030_timer_interrupt,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.name = "R4030 timer",
};
# Makefile for the Linux/MIPS kernel.
#
+CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)
+
extra-y := head.o init_task.o vmlinux.lds
obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
bcm1480_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
- action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER;
action->name = name;
action->dev_id = cd;
static struct irqaction ds1287_irqaction = {
.handler = ds1287_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
.name = "ds1287",
};
static struct irqaction gt641xx_timer0_irqaction = {
.handler = gt641xx_timer0_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
.name = "gt641xx_timer0",
};
struct irqaction c0_compare_irqaction = {
.handler = c0_compare_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
.name = "timer",
};
sb1250_unmask_irq(cpu, irq);
action->handler = sibyte_counter_handler;
- action->flags = IRQF_DISABLED | IRQF_PERCPU;
+ action->flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER;
action->name = name;
action->dev_id = cd;
static struct irqaction txx9tmr_irq = {
.handler = txx9tmr_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
.name = "txx9tmr",
.dev_id = &txx9_clock_event_device,
};
#include <asm/mipsregs.h>
#include <asm/system.h>
#include <asm/watch.h>
-
+#include <asm/spram.h>
/*
* Not all of the MIPS CPUs have the "wait" instruction available. Moreover,
* the implementation of the "wait" feature differs between CPU families. This
mips_probe_watch_registers(c);
}
-#ifdef CONFIG_CPU_MIPSR2
-extern void spram_config(void);
-#else
-static inline void spram_config(void) {}
-#endif
-
static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
{
decode_configs(c);
/* Set the SP after an empty pt_regs. */
PTR_LI sp, _THREAD_SIZE - 32 - PT_SIZE
PTR_ADDU sp, $28
+ back_to_back_c0_hazard
set_saved_sp sp, t0, t1
PTR_SUBU sp, 4 * SZREG # init stack pointer
static struct irqaction irq0 = {
.handler = timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_NOBALANCING,
+ .flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
.name = "timer"
};
*
* The things we do for performance..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"),
- __aligned__(THREAD_SIZE))) =
+union thread_union init_thread_union __init_task_data
+ __attribute__((__aligned__(THREAD_SIZE))) =
{ INIT_THREAD_INFO(init_task) };
/*
static unsigned long _gic_base;
-static unsigned int _irqbase, _mapsize, numvpes, numintrs;
-static struct gic_intr_map *_intrmap;
+static unsigned int _irqbase;
+static unsigned int gic_irq_flags[GIC_NUM_INTRS];
+#define GIC_IRQ_FLAG_EDGE 0x0001
-static struct gic_pcpu_mask pcpu_masks[NR_CPUS];
+struct gic_pcpu_mask pcpu_masks[NR_CPUS];
static struct gic_pending_regs pending_regs[NR_CPUS];
static struct gic_intrmask_regs intrmask_regs[NR_CPUS];
-#define gic_wedgeb2bok 0 /*
- * Can GIC handle b2b writes to wedge register?
- */
-#if gic_wedgeb2bok == 0
-static DEFINE_SPINLOCK(gic_wedgeb2b_lock);
-#endif
-
void gic_send_ipi(unsigned int intr)
{
-#if gic_wedgeb2bok == 0
- unsigned long flags;
-#endif
pr_debug("CPU%d: %s status %08x\n", smp_processor_id(), __func__,
read_c0_status());
- if (!gic_wedgeb2bok)
- spin_lock_irqsave(&gic_wedgeb2b_lock, flags);
GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), 0x80000000 | intr);
- if (!gic_wedgeb2bok) {
- (void) GIC_REG(SHARED, GIC_SH_CONFIG);
- spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags);
- }
}
/* This is Malta specific and needs to be exported */
-static void vpe_local_setup(unsigned int numvpes)
+static void __init vpe_local_setup(unsigned int numvpes)
{
int i;
unsigned long timer_interrupt = 5, perf_interrupt = 5;
static unsigned int gic_irq_startup(unsigned int irq)
{
- pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- GIC_SET_INTR_MASK(irq, 1);
+ pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+ GIC_SET_INTR_MASK(irq);
return 0;
}
static void gic_irq_ack(unsigned int irq)
{
-#if gic_wedgeb2bok == 0
- unsigned long flags;
-#endif
- pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- GIC_CLR_INTR_MASK(irq, 1);
+ pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+ GIC_CLR_INTR_MASK(irq);
- if (_intrmap[irq].trigtype == GIC_TRIG_EDGE) {
- if (!gic_wedgeb2bok)
- spin_lock_irqsave(&gic_wedgeb2b_lock, flags);
+ if (gic_irq_flags[irq] & GIC_IRQ_FLAG_EDGE)
GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq);
- if (!gic_wedgeb2bok) {
- (void) GIC_REG(SHARED, GIC_SH_CONFIG);
- spin_unlock_irqrestore(&gic_wedgeb2b_lock, flags);
- }
- }
}
static void gic_mask_irq(unsigned int irq)
{
- pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- GIC_CLR_INTR_MASK(irq, 1);
+ pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+ GIC_CLR_INTR_MASK(irq);
}
static void gic_unmask_irq(unsigned int irq)
{
- pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
irq -= _irqbase;
- GIC_SET_INTR_MASK(irq, 1);
+ pr_debug("CPU%d: %s: irq%d\n", smp_processor_id(), __func__, irq);
+ GIC_SET_INTR_MASK(irq);
}
#ifdef CONFIG_SMP
unsigned long flags;
int i;
- pr_debug(KERN_DEBUG "%s called\n", __func__);
irq -= _irqbase;
-
+ pr_debug(KERN_DEBUG "%s(%d) called\n", __func__, irq);
cpumask_and(&tmp, cpumask, cpu_online_mask);
if (cpus_empty(tmp))
return -1;
/* Re-route this IRQ */
GIC_SH_MAP_TO_VPE_SMASK(irq, first_cpu(tmp));
- /*
- * FIXME: assumption that _intrmap is ordered and has no holes
- */
-
- /* Update the intr_map */
- _intrmap[irq].cpunum = first_cpu(tmp);
-
/* Update the pcpu_masks */
for (i = 0; i < NR_CPUS; i++)
clear_bit(irq, pcpu_masks[i].pcpu_mask);
#endif
};
-static void __init setup_intr(unsigned int intr, unsigned int cpu,
- unsigned int pin, unsigned int polarity, unsigned int trigtype)
+static void __init gic_setup_intr(unsigned int intr, unsigned int cpu,
+ unsigned int pin, unsigned int polarity, unsigned int trigtype,
+ unsigned int flags)
{
/* Setup Intr to Pin mapping */
if (pin & GIC_MAP_TO_NMI_MSK) {
GIC_SET_TRIGGER(intr, trigtype);
/* Init Intr Masks */
- GIC_SET_INTR_MASK(intr, 0);
+ GIC_CLR_INTR_MASK(intr);
+ /* Initialise per-cpu Interrupt software masks */
+ if (flags & GIC_FLAG_IPI)
+ set_bit(intr, pcpu_masks[cpu].pcpu_mask);
+ if (flags & GIC_FLAG_TRANSPARENT)
+ GIC_SET_INTR_MASK(intr);
+ if (trigtype == GIC_TRIG_EDGE)
+ gic_irq_flags[intr] |= GIC_IRQ_FLAG_EDGE;
}
-static void __init gic_basic_init(void)
+static void __init gic_basic_init(int numintrs, int numvpes,
+ struct gic_intr_map *intrmap, int mapsize)
{
unsigned int i, cpu;
/* Setup defaults */
- for (i = 0; i < GIC_NUM_INTRS; i++) {
+ for (i = 0; i < numintrs; i++) {
GIC_SET_POLARITY(i, GIC_POL_POS);
GIC_SET_TRIGGER(i, GIC_TRIG_LEVEL);
- GIC_SET_INTR_MASK(i, 0);
+ GIC_CLR_INTR_MASK(i);
+ if (i < GIC_NUM_INTRS)
+ gic_irq_flags[i] = 0;
}
/* Setup specifics */
- for (i = 0; i < _mapsize; i++) {
- cpu = _intrmap[i].cpunum;
+ for (i = 0; i < mapsize; i++) {
+ cpu = intrmap[i].cpunum;
if (cpu == X)
continue;
-
- if (cpu == 0 && i != 0 && _intrmap[i].intrnum == 0 &&
- _intrmap[i].ipiflag == 0)
+ if (cpu == 0 && i != 0 && intrmap[i].flags == 0)
continue;
-
- setup_intr(_intrmap[i].intrnum,
- _intrmap[i].cpunum,
- _intrmap[i].pin,
- _intrmap[i].polarity,
- _intrmap[i].trigtype);
- /* Initialise per-cpu Interrupt software masks */
- if (_intrmap[i].ipiflag)
- set_bit(_intrmap[i].intrnum, pcpu_masks[cpu].pcpu_mask);
+ gic_setup_intr(i,
+ intrmap[i].cpunum,
+ intrmap[i].pin,
+ intrmap[i].polarity,
+ intrmap[i].trigtype,
+ intrmap[i].flags);
}
vpe_local_setup(numvpes);
unsigned int irqbase)
{
unsigned int gicconfig;
+ int numvpes, numintrs;
_gic_base = (unsigned long) ioremap_nocache(gic_base_addr,
gic_addrspace_size);
_irqbase = irqbase;
- _intrmap = intr_map;
- _mapsize = intr_map_size;
GICREAD(GIC_REG(SHARED, GIC_SH_CONFIG), gicconfig);
numintrs = (gicconfig & GIC_SH_CONFIG_NUMINTRS_MSK) >>
pr_debug("%s called\n", __func__);
- gic_basic_init();
+ gic_basic_init(numintrs, numvpes, intr_map, intr_map_size);
}
}
-static void sp_setfsuidgid( uid_t uid, gid_t gid)
+static int sp_setfsuidgid(uid_t uid, gid_t gid)
{
- current->cred->fsuid = uid;
- current->cred->fsgid = gid;
+ struct cred *new;
- key_fsuid_changed(current);
- key_fsgid_changed(current);
+ new = prepare_creds();
+ if (!new)
+ return -ENOMEM;
+
+ new->fsuid = uid;
+ new->fsgid = gid;
+
+ commit_creds(new);
+
+ return 0;
}
/*
mm_segment_t old_fs;
struct timeval tv;
struct timezone tz;
- int cmd;
+ int err, cmd;
char *vcwd;
int size;
/* Run the syscall at the privilege of the user who loaded the
SP program */
- if (vpe_getuid(tclimit))
- sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+ if (vpe_getuid(tclimit)) {
+ err = sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+ if (!err)
+ pr_err("Change of creds failed\n");
+ }
switch (sc.cmd) {
/* needs the flags argument translating from SDE kit to
break;
} /* switch */
- if (vpe_getuid(tclimit))
- sp_setfsuidgid( 0, 0);
+ if (vpe_getuid(tclimit)) {
+ err = sp_setfsuidgid(0, 0);
+ if (!err)
+ pr_err("restoring old creds failed\n");
+ }
old_fs = get_fs();
set_fs(KERNEL_DS);
return do_fork(clone_flags, newsp, ®s, 0,
parent_tidptr, child_tidptr);
}
+
+asmlinkage long sys32_lookup_dcookie(u32 a0, u32 a1, char __user *buf,
+ size_t len)
+{
+ return sys_lookup_dcookie(merge_64(a0, a1), buf, len);
+}
*/
static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
{
+ unsigned int vpeflags;
+ unsigned long flags;
int i;
- unsigned int flags, vpeflags;
/* Ought not to be strictly necessary for SMTC builds */
local_irq_save(flags);
static int file_open(struct inode *inode, struct file *filp)
{
- int minor = iminor(inode);
- int err;
-
- lock_kernel();
- err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
- unlock_kernel();
- return err;
+ return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1);
}
static int file_release(struct inode *inode, struct file *filp)
{
- int minor = iminor(inode);
-
- return rtlx_release(minor);
+ return rtlx_release(iminor(inode));
}
static unsigned int file_poll(struct file *file, poll_table * wait)
PTR sys_io_submit
PTR sys_io_cancel /* 4245 */
PTR sys_exit_group
- PTR sys_lookup_dcookie
+ PTR sys32_lookup_dcookie
PTR sys_epoll_create
PTR sys_epoll_ctl
PTR sys_epoll_wait /* 4250 */
PTR sys_fchmodat
PTR sys_faccessat /* 4300 */
PTR compat_sys_pselect6
- PTR sys_ppoll
+ PTR compat_sys_ppoll
PTR sys_unshare
PTR sys_splice
PTR sys32_sync_file_range /* 4305 */
local_irq_restore(flags);
}
-static void cmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void cmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
cmp_send_ipi_single(i, action);
}
for (i = 1; i < NR_CPUS; i++) {
if (amon_cpu_avail(i)) {
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
__cpu_number_map[i] = ++ncpu;
__cpu_logical_map[ncpu] = i;
}
write_vpe_c0_vpeconf0(tmp);
/* Record this as available CPU */
- cpu_set(tc, cpu_possible_map);
+ set_cpu_possible(tc, true);
__cpu_number_map[tc] = ++ncpu;
__cpu_logical_map[ncpu] = tc;
}
local_irq_restore(flags);
}
-static void vsmp_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void vsmp_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
vsmp_send_ipi_single(i, action);
}
panic(KERN_ERR "%s called", __func__);
}
-static inline void up_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void up_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
panic(KERN_ERR "%s called", __func__);
}
#include <linux/cpumask.h>
#include <linux/cpu.h>
#include <linux/err.h>
-#include <linux/smp.h>
#include <asm/atomic.h>
#include <asm/cpu.h>
cpu_idle();
}
-void arch_send_call_function_ipi(cpumask_t mask)
-{
- mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
-}
-
-/*
- * We reuse the same vector for the single IPI
- */
-void arch_send_call_function_single_ipi(int cpu)
-{
- mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
-}
-
/*
* Call into both interrupt handlers, as we share the IPI for them
*/
mp_ops->prepare_cpus(max_cpus);
set_cpu_sibling_map(0);
#ifndef CONFIG_HOTPLUG_CPU
- cpu_present_map = cpu_possible_map;
+ init_cpu_present(&cpu_possible_map);
#endif
}
/* preload SMP state for boot cpu */
void __devinit smp_prepare_boot_cpu(void)
{
- cpu_set(0, cpu_possible_map);
- cpu_set(0, cpu_online_map);
+ set_cpu_possible(0, true);
+ set_cpu_online(0, true);
cpu_set(0, cpu_callin_map);
}
asiduse smtc_live_asid[MAX_SMTC_TLBS][MAX_SMTC_ASIDS];
-
/*
* Number of InterProcessor Interrupt (IPI) message buffers to allocate
*/
*/
ntcs = ((read_c0_mvpconf0() & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1;
for (i=start_cpu_slot; i<NR_CPUS && i<ntcs; i++) {
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
__cpu_number_map[i] = i;
__cpu_logical_map[i] = i;
}
IPIQ[i].head = IPIQ[i].tail = NULL;
spin_lock_init(&IPIQ[i].lock);
IPIQ[i].depth = 0;
+ IPIQ[i].resched_flag = 0; /* No reschedules queued initially */
}
/* cpu_data index starts at zero */
* Pull any physically present but unused TCs out of circulation.
*/
while (tc < (((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT) + 1)) {
- cpu_clear(tc, cpu_possible_map);
- cpu_clear(tc, cpu_present_map);
+ set_cpu_possible(tc, false);
+ set_cpu_present(tc, false);
tc++;
}
static void smtc_ipi_qdump(void)
{
int i;
+ struct smtc_ipi *temp;
for (i = 0; i < NR_CPUS ;i++) {
- printk("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n",
+ pr_info("IPIQ[%d]: head = 0x%x, tail = 0x%x, depth = %d\n",
i, (unsigned)IPIQ[i].head, (unsigned)IPIQ[i].tail,
IPIQ[i].depth);
+ temp = IPIQ[i].head;
+
+ while (temp != IPIQ[i].tail) {
+ pr_debug("%d %d %d: ", temp->type, temp->dest,
+ (int)temp->arg);
+#ifdef SMTC_IPI_DEBUG
+ pr_debug("%u %lu\n", temp->sender, temp->stamp);
+#else
+ pr_debug("\n");
+#endif
+ temp = temp->flink;
+ }
}
}
int mtflags;
unsigned long tcrestart;
extern void r4k_wait_irqoff(void), __pastwait(void);
+ int set_resched_flag = (type == LINUX_SMP_IPI &&
+ action == SMP_RESCHEDULE_YOURSELF);
if (cpu == smp_processor_id()) {
printk("Cannot Send IPI to self!\n");
return;
}
+ if (set_resched_flag && IPIQ[cpu].resched_flag != 0)
+ return; /* There is a reschedule queued already */
+
/* Set up a descriptor, to be delivered either promptly or queued */
pipi = smtc_ipi_dq(&freeIPIq);
if (pipi == NULL) {
pipi->dest = cpu;
if (cpu_data[cpu].vpe_id != cpu_data[smp_processor_id()].vpe_id) {
/* If not on same VPE, enqueue and send cross-VPE interrupt */
+ IPIQ[cpu].resched_flag |= set_resched_flag;
smtc_ipi_nq(&IPIQ[cpu], pipi);
LOCK_CORE_PRA();
settc(cpu_data[cpu].tc_id);
*/
write_tc_c0_tchalt(0);
UNLOCK_CORE_PRA();
+ IPIQ[cpu].resched_flag |= set_resched_flag;
smtc_ipi_nq(&IPIQ[cpu], pipi);
} else {
postdirect:
* already enabled.
*/
local_irq_save(flags);
-
spin_lock(&q->lock);
pipi = __smtc_ipi_dq(q);
spin_unlock(&q->lock);
- if (pipi != NULL)
+ if (pipi != NULL) {
+ if (pipi->type == LINUX_SMP_IPI &&
+ (int)pipi->arg == SMP_RESCHEDULE_YOURSELF)
+ IPIQ[cpu].resched_flag = 0;
ipi_decode(pipi);
+ }
/*
* The use of the __raw_local restore isn't
* as obviously necessary here as in smtc_ipi_replay(),
* with interrupts off
*/
local_irq_save(flags);
+ if (pipi->type == LINUX_SMP_IPI &&
+ (int)pipi->arg == SMP_RESCHEDULE_YOURSELF)
+ IPIQ[cpu].resched_flag = 0;
ipi_decode(pipi);
local_irq_restore(flags);
}
static struct irqaction irq_ipi = {
.handler = ipi_interrupt,
- .flags = IRQF_DISABLED,
- .name = "SMTC_IPI",
- .flags = IRQF_PERCPU
+ .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .name = "SMTC_IPI"
};
static void setup_cross_vpe_interrupts(unsigned int nvpe)
#include <linux/ptrace.h>
#include <linux/stddef.h>
-#include <asm/cpu.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/system.h>
offset += 2 * SPRAM_TAG_STRIDE;
}
}
-
-__cpuinit void spram_config(void)
+void __cpuinit spram_config(void)
{
struct cpuinfo_mips *c = ¤t_cpu_data;
unsigned int config0;
case CPU_24K:
case CPU_34K:
case CPU_74K:
+ case CPU_1004K:
config0 = read_c0_config();
/* FIXME: addresses are Malta specific */
if (config0 & (1<<24)) {
text PT_LOAD FLAGS(7); /* RWX */
note PT_NOTE FLAGS(4); /* R__ */
}
-jiffies = JIFFIES;
+
+#ifdef CONFIG_32BIT
+ #ifdef CONFIG_CPU_LITTLE_ENDIAN
+ jiffies = jiffies_64;
+ #else
+ jiffies = jiffies_64 + 4;
+ #endif
+#else
+ jiffies = jiffies_64;
+#endif
SECTIONS
{
/* . = 0xa800000000300000; */
. = 0xffffffff80300000;
#endif
- . = LOADADDR;
+ . = VMLINUX_LOAD_ADDRESS;
/* read-only */
_text = .; /* Text and read-only data */
.text : {
};
struct {
- /* Virtual processing elements */
- struct list_head vpe_list;
-
- /* Thread contexts */
- struct list_head tc_list;
+ spinlock_t vpe_list_lock;
+ struct list_head vpe_list; /* Virtual processing elements */
+ spinlock_t tc_list_lock;
+ struct list_head tc_list; /* Thread contexts */
} vpecontrol = {
- .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
- .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
+ .vpe_list_lock = SPIN_LOCK_UNLOCKED,
+ .vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
+ .tc_list_lock = SPIN_LOCK_UNLOCKED,
+ .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
};
static void release_progmem(void *ptr);
/* get the vpe associated with this minor */
static struct vpe *get_vpe(int minor)
{
- struct vpe *v;
+ struct vpe *res, *v;
if (!cpu_has_mipsmt)
return NULL;
+ res = NULL;
+ spin_lock(&vpecontrol.vpe_list_lock);
list_for_each_entry(v, &vpecontrol.vpe_list, list) {
- if (v->minor == minor)
- return v;
+ if (v->minor == minor) {
+ res = v;
+ break;
+ }
}
+ spin_unlock(&vpecontrol.vpe_list_lock);
- return NULL;
+ return res;
}
/* get the vpe associated with this minor */
static struct tc *get_tc(int index)
{
- struct tc *t;
+ struct tc *res, *t;
+ res = NULL;
+ spin_lock(&vpecontrol.tc_list_lock);
list_for_each_entry(t, &vpecontrol.tc_list, list) {
- if (t->index == index)
- return t;
+ if (t->index == index) {
+ res = t;
+ break;
+ }
}
+ spin_unlock(&vpecontrol.tc_list_lock);
return NULL;
}
{
struct vpe *v;
- if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+ if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
return NULL;
- }
INIT_LIST_HEAD(&v->tc);
+ spin_lock(&vpecontrol.vpe_list_lock);
list_add_tail(&v->list, &vpecontrol.vpe_list);
+ spin_unlock(&vpecontrol.vpe_list_lock);
INIT_LIST_HEAD(&v->notify);
v->minor = minor;
+
return v;
}
INIT_LIST_HEAD(&tc->tc);
tc->index = index;
+
+ spin_lock(&vpecontrol.tc_list_lock);
list_add_tail(&tc->list, &vpecontrol.tc_list);
+ spin_unlock(&vpecontrol.tc_list_lock);
out:
return tc;
kfree(v);
}
-static void dump_mtregs(void)
+static void __maybe_unused dump_mtregs(void)
{
unsigned long val;
enum vpe_state state;
struct vpe_notifications *not;
struct vpe *v;
- int ret, err = 0;
+ int ret;
- lock_kernel();
if (minor != iminor(inode)) {
/* assume only 1 device at the moment. */
- printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
- err = -ENODEV;
- goto out;
+ pr_warning("VPE loader: only vpe1 is supported\n");
+
+ return -ENODEV;
}
if ((v = get_vpe(tclimit)) == NULL) {
- printk(KERN_WARNING "VPE loader: unable to get vpe\n");
- err = -ENODEV;
- goto out;
+ pr_warning("VPE loader: unable to get vpe\n");
+
+ return -ENODEV;
}
state = xchg(&v->state, VPE_STATE_INUSE);
v->shared_ptr = NULL;
v->__start = 0;
-out:
- unlock_kernel();
return 0;
}
{
struct vpe *v, *n;
+ device_del(&vpe_device);
+ unregister_chrdev(major, module_name);
+
+ /* No locking needed here */
list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
- if (v->state != VPE_STATE_UNUSED) {
+ if (v->state != VPE_STATE_UNUSED)
release_vpe(v);
- }
}
-
- device_del(&vpe_device);
- unregister_chrdev(major, module_name);
}
module_init(vpe_module_init);
/* And the same for proc */
-int proc_dolasatstring(ctl_table *table, int write, struct file *filp,
+int proc_dolasatstring(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- r = proc_dostring(table, write, filp, buffer, lenp, ppos);
+ r = proc_dostring(table, write, buffer, lenp, ppos);
if ((!write) || r)
return r;
}
/* proc function to write EEPROM after changing int entry */
-int proc_dolasatint(ctl_table *table, int write, struct file *filp,
+int proc_dolasatint(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ r = proc_dointvec(table, write, buffer, lenp, ppos);
if ((!write) || r)
return r;
static int rtctmp;
/* proc function to read/write RealTime Clock */
-int proc_dolasatrtc(ctl_table *table, int write, struct file *filp,
+int proc_dolasatrtc(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
struct timespec ts;
if (rtctmp < 0)
rtctmp = 0;
}
- r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ r = proc_dointvec(table, write, buffer, lenp, ppos);
if (r)
return r;
#endif
#ifdef CONFIG_INET
-int proc_lasat_ip(ctl_table *table, int write, struct file *filp,
+int proc_lasat_ip(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
unsigned int ip;
return 0;
}
-int proc_lasat_prid(ctl_table *table, int write, struct file *filp,
+int proc_lasat_prid(ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
{
int r;
- r = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ r = proc_dointvec(table, write, buffer, lenp, ppos);
if (r < 0)
return r;
if (write) {
* int-handler is not on bootstrap
*/
clear_c0_status(ST0_IM | ST0_BEV);
- local_irq_disable();
/* setting irq trigger mode */
set_irq_trigger_mode();
return ieee754dp_nanxcpt(y, "neg");
}
- if (ieee754dp_isnan(x)) /* but not infinity */
- return ieee754dp_nanxcpt(x, "neg", x);
return x;
}
CLEARCX;
FLUSHXDP;
+ /* Clear sign ALWAYS, irrespective of NaN */
+ DPSIGN(x) = 0;
+
if (xc == IEEE754_CLASS_SNAN) {
- SETCX(IEEE754_INVALID_OPERATION);
- return ieee754dp_nanxcpt(ieee754dp_indef(), "neg");
+ return ieee754dp_nanxcpt(ieee754dp_indef(), "abs");
}
- if (ieee754dp_isnan(x)) /* but not infinity */
- return ieee754dp_nanxcpt(x, "abs", x);
-
- /* quick fix up */
- DPSIGN(x) = 0;
return x;
}
return ieee754sp_nanxcpt(y, "neg");
}
- if (ieee754sp_isnan(x)) /* but not infinity */
- return ieee754sp_nanxcpt(x, "neg", x);
return x;
}
CLEARCX;
FLUSHXSP;
+ /* Clear sign ALWAYS, irrespective of NaN */
+ SPSIGN(x) = 0;
+
if (xc == IEEE754_CLASS_SNAN) {
- SETCX(IEEE754_INVALID_OPERATION);
return ieee754sp_nanxcpt(ieee754sp_indef(), "abs");
}
- if (ieee754sp_isnan(x)) /* but not infinity */
- return ieee754sp_nanxcpt(x, "abs", x);
-
- /* quick fix up */
- SPSIGN(x) = 0;
return x;
}
/* "CPU" may be TC of same VPE, VPE of same CPU, or different CPU */
}
-static inline void ssmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void ssmtc_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
ssmtc_send_ipi_single(i, action);
}
* cores it has been used on
*/
if (vma)
- mask = vma->vm_mm->cpu_vm_mask;
+ mask = *mm_cpumask(vma->vm_mm);
else
mask = cpu_online_map;
cpu_clear(cpu, mask);
#include <linux/swap.h>
#include <linux/proc_fs.h>
#include <linux/pfn.h>
+#include <linux/hardirq.h>
#include <asm/asm-offsets.h>
#include <asm/bootinfo.h>
inc_preempt_count();
idx = (addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1);
#ifdef CONFIG_MIPS_MT_SMTC
- idx += FIX_N_COLOURS * smp_processor_id();
+ idx += FIX_N_COLOURS * smp_processor_id() +
+ (in_interrupt() ? (FIX_N_COLOURS * NR_CPUS) : 0);
+#else
+ idx += in_interrupt() ? FIX_N_COLOURS : 0;
#endif
vaddr = __fix_to_virt(FIX_CMAP_END - idx);
pte = mk_pte(page, PAGE_KERNEL);
*/
static void mips_sc_inv(unsigned long addr, unsigned long size)
{
+ unsigned long lsize = cpu_scache_line_size();
+ unsigned long almask = ~(lsize - 1);
+
+ cache_op(Hit_Writeback_Inv_SD, addr & almask);
+ cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
blast_inv_scache_range(addr, addr + size);
}
launch->sp = sp;
launch->a0 = a0;
- /* Make sure target sees parameters before the go bit */
- smp_mb();
-
+ smp_wmb(); /* Target must see parameters before go */
launch->flags |= LAUNCH_FGO;
+ smp_wmb(); /* Target must see go before we poll */
+
while ((launch->flags & LAUNCH_FGONE) == 0)
;
+ smp_rmb(); /* Target will be updating flags soon */
pr_debug("launch: cpu%d gone!\n", cpu);
}
dummy = BONITO_PCIMAP_CFG;
iob(); /* sync */
- irq = readl((u32 *)_pcictrl_bonito_pcicfg);
+ irq = __raw_readl((u32 *)_pcictrl_bonito_pcicfg);
iob(); /* sync */
irq &= 0xff;
BONITO_PCIMAP_CFG = 0;
static int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
-#if defined(CONFIG_MIPS_MT_SMP)
/*
* This GIC specific tabular array defines the association between External
* Interrupts and CPUs/Core Interrupts. The nature of the External
* Interrupts is also defined here - polarity/trigger.
*/
+
+#define GIC_CPU_NMI GIC_MAP_TO_NMI_MSK
static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = {
- { GIC_EXT_INTR(0), X, X, X, X, 0 },
- { GIC_EXT_INTR(1), X, X, X, X, 0 },
- { GIC_EXT_INTR(2), X, X, X, X, 0 },
- { GIC_EXT_INTR(3), 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(4), 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(5), 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(6), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(7), 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(8), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(9), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(10), X, X, X, X, 0 },
- { GIC_EXT_INTR(11), X, X, X, X, 0 },
- { GIC_EXT_INTR(12), 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(13), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(14), 0, GIC_MAP_TO_NMI_MSK, GIC_POL_POS, GIC_TRIG_LEVEL, 0 },
- { GIC_EXT_INTR(15), X, X, X, X, 0 },
-/* This is the end of the general interrupts now we do IPI ones */
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { X, X, X, X, 0 },
+ { X, X, X, X, 0 },
+ { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { 0, GIC_CPU_NMI, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },
+ { X, X, X, X, 0 },
+ /* The remainder of this table is initialised by fill_ipi_map */
};
-#endif
/*
* GCMP needs to be detected before any SMP initialisation
*/
int __init gcmp_probe(unsigned long addr, unsigned long size)
{
+ if (mips_revision_sconid != MIPS_REVISION_SCON_ROCIT) {
+ gcmp_present = 0;
+ return gcmp_present;
+ }
+
if (gcmp_present >= 0)
return gcmp_present;
gcmp_present = (GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) == GCMP_BASE_ADDR;
if (gcmp_present)
- printk(KERN_DEBUG "GCMP present\n");
+ pr_debug("GCMP present\n");
return gcmp_present;
}
+/* Return the number of IOCU's present */
+int __init gcmp_niocu(void)
+{
+ return gcmp_present ?
+ (GCMPGCB(GC) & GCMP_GCB_GC_NUMIOCU_MSK) >> GCMP_GCB_GC_NUMIOCU_SHF :
+ 0;
+}
+
+/* Set GCMP region attributes */
+void __init gcmp_setregion(int region, unsigned long base,
+ unsigned long mask, int type)
+{
+ GCMPGCBn(CMxBASE, region) = base;
+ GCMPGCBn(CMxMASK, region) = mask | type;
+}
+
#if defined(CONFIG_MIPS_MT_SMP)
static void __init fill_ipi_map1(int baseintr, int cpu, int cpupin)
{
int intr = baseintr + cpu;
- gic_intr_map[intr].intrnum = GIC_EXT_INTR(intr);
gic_intr_map[intr].cpunum = cpu;
gic_intr_map[intr].pin = cpupin;
gic_intr_map[intr].polarity = GIC_POL_POS;
gic_intr_map[intr].trigtype = GIC_TRIG_EDGE;
- gic_intr_map[intr].ipiflag = 1;
+ gic_intr_map[intr].flags = GIC_FLAG_IPI;
ipi_map[cpu] |= (1 << (cpupin + 2));
}
}
#endif
+void __init arch_init_ipiirq(int irq, struct irqaction *action)
+{
+ setup_irq(irq, action);
+ set_irq_handler(irq, handle_percpu_irq);
+}
+
void __init arch_init_irq(void)
{
init_i8259_irqs();
GCMPGCB(GICBA) = GIC_BASE_ADDR | GCMP_GCB_GICBA_EN_MSK;
gic_present = 1;
} else {
- _msc01_biu_base = (unsigned long) ioremap_nocache(MSC01_BIU_REG_BASE, MSC01_BIU_ADDRSPACE_SZ);
- gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
- MSC01_SC_CFG_GICPRES_MSK) >> MSC01_SC_CFG_GICPRES_SHF;
+ if (mips_revision_sconid == MIPS_REVISION_SCON_ROCIT) {
+ _msc01_biu_base = (unsigned long)
+ ioremap_nocache(MSC01_BIU_REG_BASE,
+ MSC01_BIU_ADDRSPACE_SZ);
+ gic_present = (REG(_msc01_biu_base, MSC01_SC_CFG) &
+ MSC01_SC_CFG_GICPRES_MSK) >>
+ MSC01_SC_CFG_GICPRES_SHF;
+ }
}
if (gic_present)
- printk(KERN_DEBUG "GIC present\n");
+ pr_debug("GIC present\n");
switch (mips_revision_sconid) {
case MIPS_REVISION_SCON_SOCIT:
&corehi_irqaction);
}
-#if defined(CONFIG_MIPS_MT_SMP)
if (gic_present) {
/* FIXME */
int i;
-
+#if defined(CONFIG_MIPS_MT_SMP)
gic_call_int_base = GIC_NUM_INTRS - NR_CPUS;
gic_resched_int_base = gic_call_int_base - NR_CPUS;
-
fill_ipi_map();
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map, ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
+#endif
+ gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, gic_intr_map,
+ ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE);
if (!gcmp_present) {
/* Enable the GIC */
i = REG(_msc01_biu_base, MSC01_SC_CFG);
(i | (0x1 << MSC01_SC_CFG_GICENA_SHF));
pr_debug("GIC Enabled\n");
}
-
+#if defined(CONFIG_MIPS_MT_SMP)
/* set up ipi interrupts */
if (cpu_has_vint) {
set_vi_handler(MIPSCPU_INT_IPI0, malta_ipi_irqdispatch);
write_c0_status(0x1100dc00);
printk("CPU%d: status register frc %08x\n", smp_processor_id(), read_c0_status());
for (i = 0; i < NR_CPUS; i++) {
- setup_irq(MIPS_GIC_IRQ_BASE +
- GIC_RESCHED_INT(i), &irq_resched);
- setup_irq(MIPS_GIC_IRQ_BASE +
- GIC_CALL_INT(i), &irq_call);
- set_irq_handler(MIPS_GIC_IRQ_BASE +
- GIC_RESCHED_INT(i), handle_percpu_irq);
- set_irq_handler(MIPS_GIC_IRQ_BASE +
- GIC_CALL_INT(i), handle_percpu_irq);
+ arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
+ GIC_RESCHED_INT(i), &irq_resched);
+ arch_init_ipiirq(MIPS_GIC_IRQ_BASE +
+ GIC_CALL_INT(i), &irq_call);
}
+#endif
} else {
+#if defined(CONFIG_MIPS_MT_SMP)
/* set up ipi interrupts */
if (cpu_has_veic) {
set_vi_handler (MSC01E_INT_SW0, ipi_resched_dispatch);
cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
}
-
- setup_irq(cpu_ipi_resched_irq, &irq_resched);
- setup_irq(cpu_ipi_call_irq, &irq_call);
-
- set_irq_handler(cpu_ipi_resched_irq, handle_percpu_irq);
- set_irq_handler(cpu_ipi_call_irq, handle_percpu_irq);
- }
+ arch_init_ipiirq(cpu_ipi_resched_irq, &irq_resched);
+ arch_init_ipiirq(cpu_ipi_call_irq, &irq_call);
#endif
+ }
}
void malta_be_init(void)
#include <linux/init.h>
#include <asm/gt64120.h>
-
+#include <asm/gcmpregs.h>
#include <asm/mips-boards/generic.h>
#include <asm/mips-boards/bonito64.h>
#include <asm/mips-boards/msc01_pci.h>
msc_mem_resource.start = start & mask;
msc_mem_resource.end = (start & mask) | ~mask;
msc_controller.mem_offset = (start & mask) - (map & mask);
-
+#ifdef CONFIG_MIPS_CMP
+ if (gcmp_niocu())
+ gcmp_setregion(0, start, mask,
+ GCMP_GCB_GCMPB_CMDEFTGT_IOCU1);
+#endif
MSC_READ(MSC01_PCI_SC2PIOBASL, start);
MSC_READ(MSC01_PCI_SC2PIOMSKL, mask);
MSC_READ(MSC01_PCI_SC2PIOMAPL, map);
msc_io_resource.end = (map & mask) | ~mask;
msc_controller.io_offset = 0;
ioport_resource.end = ~mask;
-
+#ifdef CONFIG_MIPS_CMP
+ if (gcmp_niocu())
+ gcmp_setregion(1, start, mask,
+ GCMP_GCB_GCMPB_CMDEFTGT_IOCU1);
+#endif
/* If ranges overlap I/O takes precedence. */
start = start & mask;
end = start | ~mask;
register_pci_controller(controller);
}
+
+/* Enable PCI 2.1 compatibility in PIIX4 */
+static void __init quirk_dlcsetup(struct pci_dev *dev)
+{
+ u8 odlc, ndlc;
+ (void) pci_read_config_byte(dev, 0x82, &odlc);
+ /* Enable passive releases and delayed transaction */
+ ndlc = odlc | 7;
+ (void) pci_write_config_byte(dev, 0x82, ndlc);
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
+ quirk_dlcsetup);
smtc_send_ipi(cpu, LINUX_SMP_IPI, action);
}
-static void msmtc_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void msmtc_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
msmtc_send_ipi_single(i, action);
}
static struct irqaction timer_action = {
.handler = no_action,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.name = "Timer",
};
static struct irqaction pnx8xxx_timer_irq = {
.handler = pnx8xxx_timer_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
.name = "pnx8xxx_timer",
};
static struct irqaction monotonic_irqaction = {
.handler = monotonic_interrupt,
- .flags = IRQF_DISABLED,
+ .flags = IRQF_DISABLED | IRQF_TIMER,
.name = "Monotonic timer",
};
* otherwise, the oprofile tool will not recognize this and complain about
* "cpu_type 'unset' is not valid".
*/
-#define LOONGSON2_CPU_TYPE "mips/godson2"
+#define LOONGSON2_CPU_TYPE "mips/loongson2"
#define LOONGSON2_COUNTER1_EVENT(event) ((event & 0x0f) << 5)
#define LOONGSON2_COUNTER2_EVENT(event) ((event & 0x0f) << 9)
unsigned int ctrl;
unsigned long long reset_counter1;
unsigned long long reset_counter2;
- int cnt1_enalbed, cnt2_enalbed;
+ int cnt1_enabled, cnt2_enabled;
} reg;
DEFINE_SPINLOCK(sample_lock);
reg.ctrl = ctrl;
- reg.cnt1_enalbed = cfg[0].enabled;
- reg.cnt2_enalbed = cfg[1].enabled;
+ reg.cnt1_enabled = cfg[0].enabled;
+ reg.cnt2_enabled = cfg[1].enabled;
}
static void loongson2_cpu_start(void *args)
{
/* Start all counters on current CPU */
- if (reg.cnt1_enalbed || reg.cnt2_enalbed)
+ if (reg.cnt1_enabled || reg.cnt2_enabled)
write_c0_perfctrl(reg.ctrl);
}
*/
/* Check whether the irq belongs to me */
- enabled = reg.cnt1_enalbed | reg.cnt2_enalbed;
+ enabled = reg.cnt1_enabled | reg.cnt2_enabled;
if (!enabled)
return IRQ_NONE;
spin_lock_irqsave(&sample_lock, flags);
if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
- if (reg.cnt1_enalbed)
+ if (reg.cnt1_enabled)
oprofile_add_sample(regs, 0);
counter1 = reg.reset_counter1;
}
if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
- if (reg.cnt2_enalbed)
+ if (reg.cnt2_enabled)
oprofile_add_sample(regs, 1);
counter2 = reg.reset_counter2;
}
unsigned long intr;
unsigned long value;
static char pciirqflag;
+ int ret;
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
unsigned int vpe_status;
#endif
* allocation assigns an interrupt handler to the interrupt.
*/
if (pciirqflag == 0) {
- request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
+ ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
bpci_interrupt,
IRQF_SHARED | IRQF_DISABLED,
"PMC MSP PCI Host",
preg);
+ if (ret != 0)
+ return ret;
pciirqflag = ~0;
}
}
}
-static void yos_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
yos_send_ipi_single(i, action);
}
/*
* A node with nothing. We use it to avoid any special casing in
- * node_to_cpumask
+ * cpumask_of_node
*/
static struct node_data null_node = {
.hub = {
REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
}
-static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
ip27_send_ipi_single(i, action);
}
struct irqaction hub_rt_irqaction = {
.handler = hub_rt_counter_handler,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
.name = "hub-rt",
};
unsigned long flags;
unsigned int irq_dirty;
- if (cpumask_weight(mask) != 1) {
- printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
- return -1;
- }
i = cpumask_first(mask);
/* Convert logical CPU to physical CPU */
__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
}
-static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action)
+static void bcm1480_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
bcm1480_send_ipi_single(i, action);
}
static int sbprof_tb_open(struct inode *inode, struct file *filp)
{
int minor;
- int err = 0;
- lock_kernel();
minor = iminor(inode);
- if (minor != 0) {
- err = -ENODEV;
- goto out;
- }
+ if (minor != 0)
+ return -ENODEV;
- if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) {
- err = -EBUSY;
- goto out;
- }
+ if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
+ return -EBUSY;
memset(&sbp, 0, sizeof(struct sbprof_tb));
sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
if (!sbp.sbprof_tbbuf) {
- err = -ENOMEM;
- goto out;
+ sbp.open = SB_CLOSED;
+ wmb();
+ return -ENOMEM;
}
+
memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
init_waitqueue_head(&sbp.tb_sync);
init_waitqueue_head(&sbp.tb_read);
mutex_init(&sbp.lock);
sbp.open = SB_OPEN;
+ wmb();
- out:
- unlock_kernel();
- return err;
+ return 0;
}
static int sbprof_tb_release(struct inode *inode, struct file *filp)
int minor;
minor = iminor(inode);
- if (minor != 0 || !sbp.open)
+ if (minor != 0 || sbp.open != SB_CLOSED)
return -ENODEV;
mutex_lock(&sbp.lock);
sbprof_zbprof_stop();
vfree(sbp.sbprof_tbbuf);
- sbp.open = 0;
+ sbp.open = SB_CLOSED;
+ wmb();
mutex_unlock(&sbp.lock);
}
tb_dev = dev;
- sbp.open = 0;
+ sbp.open = SB_CLOSED;
+ wmb();
tb_period = zbbus_mhz * 10000LL;
pr_info(DEVNAME ": initialized - tb_period = %lld\n",
(long long) tb_period);
__raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
}
-static inline void sb1250_send_ipi_mask(cpumask_t mask, unsigned int action)
+static inline void sb1250_send_ipi_mask(const struct cpumask *mask,
+ unsigned int action)
{
unsigned int i;
- for_each_cpu_mask(i, mask)
+ for_each_cpu(i, mask)
sb1250_send_ipi_single(i, action);
}
break;
}
ts->tv_sec = sec;
- tv->tv_nsec = 0;
+ ts->tv_nsec = 0;
}
int rtc_mips_set_time(unsigned long sec)
static struct irqaction a20r_irqaction = {
.handler = a20r_interrupt,
- .flags = IRQF_DISABLED | IRQF_PERCPU,
+ .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER,
.name = "a20r-timer",
};
struct clk *clk_get(struct device *dev, const char *id)
{
if (!strcmp(id, "spi-baseclk"))
- return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 4);
+ return (struct clk *)((unsigned long)txx9_gbus_clock / 2 / 2);
if (!strcmp(id, "imbus_clk"))
return (struct clk *)((unsigned long)txx9_gbus_clock / 2);
return ERR_PTR(-ENOENT);
out_pdev:
platform_device_put(pdev);
out_gpio:
- gpio_remove(&iocled->chip);
+ if (gpiochip_remove(&iocled->chip))
+ return;
out_unmap:
iounmap(iocled->mmioaddr);
out_free:
#define enter_lazy_tlb(mm, tsk) do {} while (0)
#ifdef CONFIG_SMP
-#define cpu_ran_vm(cpu, task) \
- cpu_set((cpu), (task)->cpu_vm_mask)
-#define cpu_maybe_ran_vm(cpu, task) \
- cpu_test_and_set((cpu), (task)->cpu_vm_mask)
+#define cpu_ran_vm(cpu, mm) \
+ cpumask_set_cpu((cpu), mm_cpumask(mm))
+#define cpu_maybe_ran_vm(cpu, mm) \
+ cpumask_test_and_set_cpu((cpu), mm_cpumask(mm))
#else
-#define cpu_ran_vm(cpu, task) do {} while (0)
-#define cpu_maybe_ran_vm(cpu, task) true
+#define cpu_ran_vm(cpu, mm) do {} while (0)
+#define cpu_maybe_ran_vm(cpu, mm) true
#endif /* CONFIG_SMP */
/*
struct __large_struct { unsigned long buf[100]; };
#define __m(x) (*(struct __large_struct *)(x))
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- __typeof(*(ptr)) __gu_val; \
- unsigned long __gu_addr; \
- int __gu_err; \
- __gu_addr = (unsigned long) (ptr); \
- switch (size) { \
- case 1: __get_user_asm("bu"); break; \
- case 2: __get_user_asm("hu"); break; \
- case 4: __get_user_asm("" ); break; \
- default: __get_user_unknown(); break; \
- } \
- x = (__typeof__(*(ptr))) __gu_val; \
- __gu_err; \
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ unsigned long __gu_addr; \
+ int __gu_err; \
+ __gu_addr = (unsigned long) (ptr); \
+ switch (size) { \
+ case 1: { \
+ unsigned char __gu_val; \
+ __get_user_asm("bu"); \
+ (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \
+ break; \
+ } \
+ case 2: { \
+ unsigned short __gu_val; \
+ __get_user_asm("hu"); \
+ (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \
+ break; \
+ } \
+ case 4: { \
+ unsigned int __gu_val; \
+ __get_user_asm(""); \
+ (x) = *(__force __typeof__(*(ptr))*) &__gu_val; \
+ break; \
+ } \
+ default: \
+ __get_user_unknown(); \
+ break; \
+ } \
+ __gu_err; \
})
-#define __get_user_check(x, ptr, size) \
-({ \
- __typeof__(*(ptr)) __gu_val; \
- unsigned long __gu_addr; \
- int __gu_err; \
- __gu_addr = (unsigned long) (ptr); \
- if (likely(__access_ok(__gu_addr,size))) { \
- switch (size) { \
- case 1: __get_user_asm("bu"); break; \
- case 2: __get_user_asm("hu"); break; \
- case 4: __get_user_asm("" ); break; \
- default: __get_user_unknown(); break; \
- } \
- } \
- else { \
- __gu_err = -EFAULT; \
- __gu_val = 0; \
- } \
- x = (__typeof__(*(ptr))) __gu_val; \
- __gu_err; \
+#define __get_user_check(x, ptr, size) \
+({ \
+ int _e; \
+ if (likely(__access_ok((unsigned long) (ptr), (size)))) \
+ _e = __get_user_nocheck((x), (ptr), (size)); \
+ else { \
+ _e = -EFAULT; \
+ (x) = (__typeof__(x))0; \
+ } \
+ _e; \
})
#define __get_user_asm(INSN) \
OFFSET(__rx_buffer, mn10300_serial_port, rx_buffer);
OFFSET(__rx_inp, mn10300_serial_port, rx_inp);
OFFSET(__rx_outp, mn10300_serial_port, rx_outp);
- OFFSET(__tx_info_buffer, mn10300_serial_port, uart.info);
+ OFFSET(__uart_state, mn10300_serial_port, uart.state);
OFFSET(__tx_xchar, mn10300_serial_port, tx_xchar);
OFFSET(__tx_break, mn10300_serial_port, tx_break);
OFFSET(__intr_flags, mn10300_serial_port, intr_flags);
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
or d2,d2
bne mnsc_vdma_tx_xchar
- mov (__tx_info_buffer,a3),a2 # get the uart_info struct for Tx
+ mov (__uart_state,a3),a2 # see if the TTY Tx queue has anything in it
mov (__xmit_tail,a2),d3
mov (__xmit_head,a2),d2
cmp d3,d2
static void mn10300_serial_receive_interrupt(struct mn10300_serial_port *port)
{
struct uart_icount *icount = &port->uart.icount;
- struct tty_struct *tty = port->uart.info->port.tty;
+ struct tty_struct *tty = port->uart.state->port.tty;
unsigned ix;
int count;
u8 st, ch, push, status, overrun;
{
_enter("%s", port->name);
- if (!port->uart.info || !port->uart.info->port.tty) {
+ if (!port->uart.state || !port->uart.state->port.tty) {
mn10300_serial_dis_tx_intr(port);
return;
}
if (uart_tx_stopped(&port->uart) ||
- uart_circ_empty(&port->uart.info->xmit))
+ uart_circ_empty(&port->uart.state->xmit))
mn10300_serial_dis_tx_intr(port);
- if (uart_circ_chars_pending(&port->uart.info->xmit) < WAKEUP_CHARS)
+ if (uart_circ_chars_pending(&port->uart.state->xmit) < WAKEUP_CHARS)
uart_write_wakeup(&port->uart);
}
*port->_control = ctr;
uart_handle_cts_change(&port->uart, st & SC2STR_CTS);
- wake_up_interruptible(&port->uart.info->delta_msr_wait);
+ wake_up_interruptible(&port->uart.state->port.delta_msr_wait);
}
/*
_enter("%s{%lu}",
port->name,
- CIRC_CNT(&port->uart.info->xmit.head,
- &port->uart.info->xmit.tail,
+ CIRC_CNT(&port->uart.state->xmit.head,
+ &port->uart.state->xmit.tail,
UART_XMIT_SIZE));
/* kick the virtual DMA controller */
#include <linux/stat.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/tty.h>
#include <asm/uaccess.h>
RO_DATA(PAGE_SIZE)
/* writeable */
- .data : { /* Data */
- DATA_DATA
- CONSTRUCTORS
- }
-
- .data_nosave : { NOSAVE_DATA; }
-
- .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); }
- .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); }
-
- /* rarely changed data like cpu maps */
- . = ALIGN(32);
- .data.read_mostly : AT(ADDR(.data.read_mostly)) {
- READ_MOSTLY_DATA(32);
- _edata = .; /* End of data section */
- }
-
- .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
+ RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
/* might get freed after init */
. = ALIGN(PAGE_SIZE);
/* will be freed after init */
. = ALIGN(PAGE_SIZE); /* Init code and data */
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT;
- _einittext = .;
- }
- .init.data : { INIT_DATA; }
- .setup.init : { INIT_SETUP(16); }
-
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
- }
- __initcall_end = .;
- .con_initcall.init : { CON_INITCALL; }
-
- SECURITY_INIT
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(16)
. = ALIGN(4);
__alt_instructions = .;
.altinstructions : { *(.altinstructions) }
.exit.text : { EXIT_TEXT; }
.exit.data : { EXIT_DATA; }
- .init.ramfs : { INIT_RAM_FS; }
-
PERCPU(32)
. = ALIGN(PAGE_SIZE);
__init_end = .;
extern unsigned long mn10300_iobclk;
extern unsigned long mn10300_tsc_per_HZ;
-#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+#define MN10300_IOCLK mn10300_ioclk
/* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+/* #define MN10300_IOBCLK mn10300_iobclk */
#else /* !CONFIG_MN10300_RTC */
#define MN10300_TSCCLK MN10300_IOCLK
#ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ
#else /* !CONFIG_MN10300_RTC */
#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
#endif /* !CONFIG_MN10300_RTC */
extern unsigned long mn10300_iobclk;
extern unsigned long mn10300_tsc_per_HZ;
-#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+#define MN10300_IOCLK mn10300_ioclk
/* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+/* #define MN10300_IOBCLK mn10300_iobclk */
#else /* !CONFIG_MN10300_RTC */
#define MN10300_TSCCLK MN10300_IOCLK
#ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#define MN10300_TSC_PER_HZ mn10300_tsc_per_HZ
#else /* !CONFIG_MN10300_RTC */
#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
#endif /* !CONFIG_MN10300_RTC */
select BUG
select HAVE_PERF_EVENTS
select GENERIC_ATOMIC64 if !64BIT
+ select HAVE_ARCH_TRACEHOOK
help
The PA-RISC microprocessor is designed by Hewlett-Packard and used
in many of their workstations & servers (HP9000 700 and 800 series,
@echo '* vmlinux - Uncompressed kernel image (./vmlinux)'
@echo ' palo - Bootable image (./lifimage)'
@echo ' install - Install kernel using'
- @echo ' (your) ~/bin/installkernel or'
- @echo ' (distribution) /sbin/installkernel or'
+ @echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ @echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
@echo ' copy to $$(INSTALL_PATH)'
endef
#define F_SETOWN 12 /* for sockets. */
#define F_SETSIG 13 /* for sockets. */
#define F_GETSIG 14 /* for sockets. */
+#define F_GETOWN_EX 15
+#define F_SETOWN_EX 16
/* for posix fcntl() and lockf() */
#define F_RDLCK 01
#define KERNEL_MAP_END (TMPALIAS_MAP_START)
#ifndef __ASSEMBLY__
-extern void *vmalloc_start;
+extern void *parisc_vmalloc_start;
#define PCXL_DMA_MAP_SIZE (8*1024*1024)
-#define VMALLOC_START ((unsigned long)vmalloc_start)
+#define VMALLOC_START ((unsigned long)parisc_vmalloc_start)
#define VMALLOC_END (KERNEL_MAP_END)
#endif /*__ASSEMBLY__*/
/* hardirq.h: PA-RISC hard IRQ support.
*
* Copyright (C) 2001 Matthew Wilcox <matthew@wil.cx>
- *
- * The locking is really quite interesting. There's a cpu-local
- * count of how many interrupts are being handled, and a global
- * lock. An interrupt can only be serviced if the global lock
- * is free. You can't be sure no more interrupts are being
- * serviced until you've acquired the lock and then checked
- * all the per-cpu interrupt counts are all zero. It's a specialised
- * br_lock, and that's exactly how Sparc does it. We don't because
- * it's more locking for us. This way is lock-free in the interrupt path.
*/
#ifndef _PARISC_HARDIRQ_H
#define _PARISC_HARDIRQ_H
-#include <linux/threads.h>
-#include <linux/irq.h>
-
-typedef struct {
- unsigned long __softirq_pending; /* set_bit is used on this */
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
+#include <asm-generic/hardirq.h>
#endif /* _PARISC_HARDIRQ_H */
#define user_mode(regs) (((regs)->iaoq[0] & 3) ? 1 : 0)
#define user_space(regs) (((regs)->iasq[1] != 0) ? 1 : 0)
#define instruction_pointer(regs) ((regs)->iaoq[0] & ~3)
+#define user_stack_pointer(regs) ((regs)->gr[30])
unsigned long profile_pc(struct pt_regs *);
extern void show_regs(struct pt_regs *);
-#endif
+
+
+#endif /* __KERNEL__ */
#endif
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
#endif /* !ASSEMBLY */
--- /dev/null
+/* syscall.h */
+
+#ifndef _ASM_PARISC_SYSCALL_H_
+#define _ASM_PARISC_SYSCALL_H_
+
+#include <linux/err.h>
+#include <asm/ptrace.h>
+
+static inline long syscall_get_nr(struct task_struct *tsk,
+ struct pt_regs *regs)
+{
+ return regs->gr[20];
+}
+
+static inline void syscall_get_arguments(struct task_struct *tsk,
+ struct pt_regs *regs, unsigned int i,
+ unsigned int n, unsigned long *args)
+{
+ BUG_ON(i);
+
+ switch (n) {
+ case 6:
+ args[5] = regs->gr[21];
+ case 5:
+ args[4] = regs->gr[22];
+ case 4:
+ args[3] = regs->gr[23];
+ case 3:
+ args[2] = regs->gr[24];
+ case 2:
+ args[1] = regs->gr[25];
+ case 1:
+ args[0] = regs->gr[26];
+ break;
+ default:
+ BUG();
+ }
+}
+
+#endif /*_ASM_PARISC_SYSCALL_H_*/
#define init_thread_info (init_thread_union.thread_info)
#define init_stack (init_thread_union.stack)
+/* how to get the thread information struct from C */
+#define current_thread_info() ((struct thread_info *)mfctl(30))
+
+#endif /* !__ASSEMBLY */
+
/* thread information allocation */
#define THREAD_SIZE_ORDER 2
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
#define THREAD_SHIFT (PAGE_SHIFT + THREAD_SIZE_ORDER)
-/* how to get the thread information struct from C */
-#define current_thread_info() ((struct thread_info *)mfctl(30))
-
-#endif /* !__ASSEMBLY */
-
#define PREEMPT_ACTIVE_BIT 28
#define PREEMPT_ACTIVE (1 << PREEMPT_ACTIVE_BIT)
#define TIF_RESTORE_SIGMASK 6 /* restore saved signal mask */
#define TIF_FREEZE 7 /* is freezing for suspend */
#define TIF_NOTIFY_RESUME 8 /* callback before returning to user */
+#define TIF_SINGLESTEP 9 /* single stepping? */
+#define TIF_BLOCKSTEP 10 /* branch stepping? */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_BLOCKSTEP (1 << TIF_BLOCKSTEP)
#define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | \
_TIF_NEED_RESCHED | _TIF_RESTORE_SIGMASK)
# User may have a custom install script
-if [ -x ~/bin/installkernel ]; then exec ~/bin/installkernel "$@"; fi
-if [ -x /sbin/installkernel ]; then exec /sbin/installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install
DEFINE(DTLB_OFF_COUNT, offsetof(struct pdc_cache_info, dt_off_count));
DEFINE(DTLB_LOOP, offsetof(struct pdc_cache_info, dt_loop));
BLANK();
- DEFINE(PA_BLOCKSTEP_BIT, 31-PT_BLOCKSTEP_BIT);
- DEFINE(PA_SINGLESTEP_BIT, 31-PT_SINGLESTEP_BIT);
+ DEFINE(TIF_BLOCKSTEP_PA_BIT, 31-TIF_BLOCKSTEP);
+ DEFINE(TIF_SINGLESTEP_PA_BIT, 31-TIF_SINGLESTEP);
BLANK();
DEFINE(ASM_PMD_SHIFT, PMD_SHIFT);
DEFINE(ASM_PGDIR_SHIFT, PGDIR_SHIFT);
b,n syscall_check_sig
syscall_restore:
- /* Are we being ptraced? */
LDREG TI_TASK-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1
- ldw TASK_PTRACE(%r1), %r19
- bb,< %r19,31,syscall_restore_rfi
- nop
+ /* Are we being ptraced? */
+ ldw TASK_FLAGS(%r1),%r19
+ ldi (_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2
+ and,COND(=) %r19,%r2,%r0
+ b,n syscall_restore_rfi
ldo TASK_PT_FR31(%r1),%r19 /* reload fpregs */
rest_fp %r19
ldi 0x0b,%r20 /* Create new PSW */
depi -1,13,1,%r20 /* C, Q, D, and I bits */
- /* The values of PA_SINGLESTEP_BIT and PA_BLOCKSTEP_BIT are
- * set in include/linux/ptrace.h and converted to PA bitmap
+ /* The values of SINGLESTEP_BIT and BLOCKSTEP_BIT are
+ * set in thread_info.h and converted to PA bitmap
* numbers in asm-offsets.c */
- /* if ((%r19.PA_SINGLESTEP_BIT)) { %r20.27=1} */
- extru,= %r19,PA_SINGLESTEP_BIT,1,%r0
+ /* if ((%r19.SINGLESTEP_BIT)) { %r20.27=1} */
+ extru,= %r19,TIF_SINGLESTEP_PA_BIT,1,%r0
depi -1,27,1,%r20 /* R bit */
- /* if ((%r19.PA_BLOCKSTEP_BIT)) { %r20.7=1} */
- extru,= %r19,PA_BLOCKSTEP_BIT,1,%r0
+ /* if ((%r19.BLOCKSTEP_BIT)) { %r20.7=1} */
+ extru,= %r19,TIF_BLOCKSTEP_PA_BIT,1,%r0
depi -1,7,1,%r20 /* T bit */
STREG %r20,TASK_PT_PSW(%r1)
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((aligned(128))) __attribute__((__section__(".data.init_task"))) =
+union thread_union init_thread_union __init_task_data
+ __attribute__((aligned(128))) =
{ INIT_THREAD_INFO(init_task) };
#if PT_NLEVELS == 3
set_eiem(cpu_eiem); /* EIEM : enable all external intr */
}
-
-void ack_bad_irq(unsigned int irq)
-{
- printk(KERN_WARNING "unexpected IRQ %d\n", irq);
-}
* ourselves */
for (i = 1; i < hdr->e_shnum; i++) {
if(sechdrs[i].sh_type == SHT_SYMTAB
- && (sechdrs[i].sh_type & SHF_ALLOC)) {
+ && (sechdrs[i].sh_flags & SHF_ALLOC)) {
int strindex = sechdrs[i].sh_link;
/* FIXME: AWFUL HACK
* The cast is to drop the const from
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
+#include <linux/tracehook.h>
#include <linux/user.h>
#include <linux/personality.h>
#include <linux/security.h>
*/
void ptrace_disable(struct task_struct *task)
{
- task->ptrace &= ~(PT_SINGLESTEP|PT_BLOCKSTEP);
+ clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+ clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
/* make sure the trap bits are not set */
pa_psw(task)->r = 0;
void user_enable_single_step(struct task_struct *task)
{
- task->ptrace &= ~PT_BLOCKSTEP;
- task->ptrace |= PT_SINGLESTEP;
+ clear_tsk_thread_flag(task, TIF_BLOCKSTEP);
+ set_tsk_thread_flag(task, TIF_SINGLESTEP);
if (pa_psw(task)->n) {
struct siginfo si;
void user_enable_block_step(struct task_struct *task)
{
- task->ptrace &= ~PT_SINGLESTEP;
- task->ptrace |= PT_BLOCKSTEP;
+ clear_tsk_thread_flag(task, TIF_SINGLESTEP);
+ set_tsk_thread_flag(task, TIF_BLOCKSTEP);
/* Enable taken branch trap. */
pa_psw(task)->r = 0;
}
#endif
+long do_syscall_trace_enter(struct pt_regs *regs)
+{
+ if (test_thread_flag(TIF_SYSCALL_TRACE) &&
+ tracehook_report_syscall_entry(regs))
+ return -1L;
+
+ return regs->gr[20];
+}
-void syscall_trace(void)
+void do_syscall_trace_exit(struct pt_regs *regs)
{
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
- if (!(current->ptrace & PT_PTRACED))
- return;
- ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
- ? 0x80 : 0));
- /*
- * this isn't the same as continuing with a signal, but it will do
- * for normal use. strace only continues with a signal if the
- * stopping signal is not SIGTRAP. -brl
- */
- if (current->exit_code) {
- send_sig(current->exit_code, current, 1);
- current->exit_code = 0;
- }
+ int stepping = test_thread_flag(TIF_SINGLESTEP) ||
+ test_thread_flag(TIF_BLOCKSTEP);
+
+ if (stepping || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, stepping);
}
#include <linux/errno.h>
#include <linux/wait.h>
#include <linux/ptrace.h>
+#include <linux/tracehook.h>
#include <linux/unistd.h>
#include <linux/stddef.h>
#include <linux/compat.h>
#include <asm/asm-offsets.h>
#ifdef CONFIG_COMPAT
-#include <linux/compat.h>
#include "signal32.h"
#endif
sigaddset(¤t->blocked,sig);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
+
+ tracehook_signal_handler(sig, info, ka, regs, 0);
+
return 1;
}
#include <linux/signal.h>
#include <linux/resource.h>
#include <linux/times.h>
-#include <linux/utsname.h>
#include <linux/time.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
STREG %r18,PT_GR18(%r2)
/* Finished saving things for the debugger */
- ldil L%syscall_trace,%r1
+ copy %r2,%r26
+ ldil L%do_syscall_trace_enter,%r1
ldil L%tracesys_next,%r2
- be R%syscall_trace(%sr7,%r1)
+ be R%do_syscall_trace_enter(%sr7,%r1)
ldo R%tracesys_next(%r2),%r2
-tracesys_next:
+tracesys_next:
+ /* do_syscall_trace_enter either returned the syscallno, or -1L,
+ * so we skip restoring the PT_GR20 below, since we pulled it from
+ * task->thread.regs.gr[20] above.
+ */
+ copy %ret0,%r20
ldil L%sys_call_table,%r1
ldo R%sys_call_table(%r1), %r19
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
- LDREG TASK_PT_GR20(%r1), %r20
LDREG TASK_PT_GR26(%r1), %r26 /* Restore the users args */
LDREG TASK_PT_GR25(%r1), %r25
LDREG TASK_PT_GR24(%r1), %r24
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl syscall_trace, %r2
+ ldo TASK_REGS(%r1),%r26
+ bl do_syscall_trace_exit,%r2
STREG %r28,TASK_PT_GR28(%r1) /* save return value now */
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
tracesys_sigexit:
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
- LDREG 0(%r1), %r1
+ LDREG TI_TASK(%r1), %r1
#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl syscall_trace, %r2
- nop
+ bl do_syscall_trace_exit,%r2
+ ldo TASK_REGS(%r1),%r26
ldil L%syscall_exit_rfi,%r1
be,n R%syscall_exit_rfi(%sr7,%r1)
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
/* ld script to make hppa Linux kernel */
#ifndef CONFIG_64BIT
*/
. = ALIGN(PAGE_SIZE);
data_start = .;
- . = ALIGN(16);
- /* Exception table */
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(16)
NOTES
__stop___unwind = .;
}
- /* rarely changed data like cpu maps */
- . = ALIGN(16);
- .data.read_mostly : {
- *(.data.read_mostly)
- }
-
- . = ALIGN(L1_CACHE_BYTES);
/* Data */
- .data : {
- DATA_DATA
- CONSTRUCTORS
- }
-
- . = ALIGN(L1_CACHE_BYTES);
- .data.cacheline_aligned : {
- *(.data.cacheline_aligned)
- }
+ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
/* PA-RISC locks requires 16-byte alignment */
. = ALIGN(16);
*(.data.lock_aligned)
}
- /* nosave data is really only used for software suspend...it's here
- * just in case we ever implement it
- */
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- .data_nosave : {
- *(.data.nosave)
- }
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
-
/* End of data section */
_edata = .;
}
__bss_stop = .;
-
- /* assembler code expects init_task to be 16k aligned */
- . = ALIGN(16384);
- /* init_task */
- .data.init_task : {
- *(.data.init_task)
- }
-
#ifdef CONFIG_64BIT
. = ALIGN(16);
/* Linkage tables */
/* reserve space for interrupt stack by aligning __init* to 16k */
. = ALIGN(16384);
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : {
- INIT_DATA
- }
- . = ALIGN(16);
- .init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- SECURITY_INIT
-
- /* alternate instruction replacement. This is a mechanism x86 uses
- * to detect the CPU type and replace generic instruction sequences
- * with CPU specific ones. We don't currently do this in PA, but
- * it seems like a good idea...
- */
- . = ALIGN(4);
- .altinstructions : {
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : {
- *(.altinstr_replacement)
- }
-
- /* .exit.text is discard at runtime, not link time, to deal with references
- * from .altinstructions and .eh_frame
- */
- .exit.text : {
+ INIT_TEXT_SECTION(16384)
+ INIT_DATA_SECTION(16)
+ /* we have to discard exit text and such at runtime, not link time */
+ .exit.text :
+ {
EXIT_TEXT
}
- .exit.data : {
+ .exit.data :
+ {
EXIT_DATA
}
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
PERCPU(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
#define SET_MAP_OFFSET(x) ((void *)(((unsigned long)(x) + VM_MAP_OFFSET) \
& ~(VM_MAP_OFFSET-1)))
-void *vmalloc_start __read_mostly;
-EXPORT_SYMBOL(vmalloc_start);
+void *parisc_vmalloc_start __read_mostly;
+EXPORT_SYMBOL(parisc_vmalloc_start);
#ifdef CONFIG_PA11
unsigned long pcxl_dma_start __read_mostly;
#ifdef CONFIG_PA11
if (hppa_dma_ops == &pcxl_dma_ops) {
pcxl_dma_start = (unsigned long)SET_MAP_OFFSET(MAP_START);
- vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start + PCXL_DMA_MAP_SIZE);
+ parisc_vmalloc_start = SET_MAP_OFFSET(pcxl_dma_start
+ + PCXL_DMA_MAP_SIZE);
} else {
pcxl_dma_start = 0;
- vmalloc_start = SET_MAP_OFFSET(MAP_START);
+ parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
}
#else
- vmalloc_start = SET_MAP_OFFSET(MAP_START);
+ parisc_vmalloc_start = SET_MAP_OFFSET(MAP_START);
#endif
printk(KERN_INFO "Memory: %luk/%luk available (%dk kernel code, %dk reserved, %dk data, %dk init)\n",
config NODES_SHIFT
int
+ default "8" if PPC64
default "4"
depends on NEED_MULTIPLE_NODES
+config MAX_ACTIVE_REGIONS
+ int
+ default "256" if PPC64
+ default "32"
+
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on PPC64
config ARCH_POPULATES_NODE_MAP
def_bool y
+config SYS_SUPPORTS_HUGETLBFS
+ def_bool y
+ depends on PPC_BOOK3S_64
+
source "mm/Kconfig"
config ARCH_MEMORY_PROBE
# Default to zImage, override when needed
all: zImage
-CPPFLAGS_vmlinux.lds := -Upowerpc
-
BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.%
PHONY += $(BOOT_TARGETS)
boot := arch/$(ARCH)/boot
+ifeq ($(CONFIG_RELOCATABLE),y)
+quiet_cmd_relocs_check = CALL $<
+ cmd_relocs_check = perl $< "$(OBJDUMP)" "$(obj)/vmlinux"
+
+PHONY += relocs_check
+relocs_check: arch/powerpc/relocs_check.pl vmlinux
+ $(call cmd,relocs_check)
+
+zImage: relocs_check
+endif
+
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
@echo ' simpleImage.<dt> - Firmware independent image.'
@echo ' treeImage.<dt> - Support for older IBM 4xx firmware (not U-Boot)'
@echo ' install - Install kernel using'
- @echo ' (your) ~/bin/installkernel or'
- @echo ' (distribution) /sbin/installkernel or'
+ @echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ @echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
@echo ' install to $$(INSTALL_PATH) and run lilo'
@echo ' *_defconfig - Select default config from arch/$(ARCH)/configs'
@echo ''
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
rtc@50 {
compatible = "at,24c08";
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200-sram";
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
};
sram@8000 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
rtc@68 {
compatible = "dallas,ds1339";
reg = <0x1700 0x20>;
interrupts = <9 0x8>;
interrupt-parent = < &ipic >;
- fsl5200-clocking;
};
i2c@1720 {
reg = <0x1720 0x20>;
interrupts = <10 0x8>;
interrupt-parent = < &ipic >;
- fsl5200-clocking;
};
i2c@1740 {
reg = <0x1740 0x20>;
interrupts = <11 0x8>;
interrupt-parent = < &ipic >;
- fsl5200-clocking;
};
i2ccontrol@1760 {
--- /dev/null
+/*
+ * Manroland mucmc52 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "manroland,mucmc52";
+ compatible = "manroland,mucmc52";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ gpt0: timer@600 { // GPT 0 in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt1: timer@610 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt2: timer@620 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt3: timer@630 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { /* PSC1 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2200 { /* PSC2 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2200 0x100>;
+ interrupts = <2 2 0>;
+ };
+
+ serial@2c00 { /* PSC6 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ compatible = "intel,lxt971";
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ hwmon@2c {
+ compatible = "ad,adm9240";
+ reg = <0x2c>;
+ };
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ pci@f0000d00 {
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+ reg = <0xf0000d00 0x100>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x10 */
+ 0x8000 0 0 1 &mpc5200_pic 0 3 3
+ 0x8000 0 0 2 &mpc5200_pic 0 3 3
+ 0x8000 0 0 3 &mpc5200_pic 0 2 3
+ 0x8000 0 0 4 &mpc5200_pic 0 1 3
+ >;
+ clock-frequency = <0>; // From boot loader
+ interrupts = <2 8 0 2 9 0 2 10 0>;
+ bus-range = <0 0>;
+ ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
+ 0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xff800000 0x00800000
+ 1 0 0x80000000 0x00800000
+ 3 0 0x80000000 0x00800000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <4>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+ partition@0 {
+ label = "DTS";
+ reg = <0x0 0x00100000>;
+ };
+ partition@100000 {
+ label = "Kernel";
+ reg = <0x100000 0x00200000>;
+ };
+ partition@300000 {
+ label = "RootFS";
+ reg = <0x00300000 0x00200000>;
+ };
+ partition@500000 {
+ label = "user";
+ reg = <0x00500000 0x00200000>;
+ };
+ partition@700000 {
+ label = "U-Boot";
+ reg = <0x00700000 0x00040000>;
+ };
+ partition@740000 {
+ label = "Env";
+ reg = <0x00740000 0x00020000>;
+ };
+ partition@760000 {
+ label = "red. Env";
+ reg = <0x00760000 0x00020000>;
+ };
+ partition@780000 {
+ label = "reserve";
+ reg = <0x00780000 0x00080000>;
+ };
+ };
+
+ simple100: gpio-controller-100@3,600100 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600100 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple104: gpio-controller-104@3,600104 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600104 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple200: gpio-controller-200@3,600200 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600200 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple201: gpio-controller-201@3,600201 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600201 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple202: gpio-controller-202@3,600202 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600202 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple203: gpio-controller-203@3,600203 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600203 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple204: gpio-controller-204@3,600204 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600204 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple206: gpio-controller-206@3,600206 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600206 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple207: gpio-controller-207@3,600207 {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x00600207 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ simple20f: gpio-controller-20f@3,60020f {
+ compatible = "manroland,mucmc52-aux-gpio";
+ reg = <3 0x0060020f 0x1>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ };
+};
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
- fsl5200-clocking;
};
i2c@3d40 {
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
compatible = "fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
- fsl5200-clocking;
rtc@68 {
compatible = "dallas,ds1307";
--- /dev/null
+/*
+ * Manroland uc101 board Device Tree Source
+ *
+ * Copyright (C) 2009 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "manroland,uc101";
+ compatible = "manroland,uc101";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,5200@0 {
+ device_type = "cpu";
+ reg = <0>;
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>; // from bootloader
+ bus-frequency = <0>; // from bootloader
+ clock-frequency = <0>; // from bootloader
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x04000000>; // 64MB
+ };
+
+ soc5200@f0000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc5200b-immr";
+ ranges = <0 0xf0000000 0x0000c000>;
+ reg = <0xf0000000 0x00000100>;
+ bus-frequency = <0>; // from bootloader
+ system-frequency = <0>; // from bootloader
+
+ cdm@200 {
+ compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+ reg = <0x200 0x38>;
+ };
+
+ mpc5200_pic: interrupt-controller@500 {
+ // 5200 interrupts are encoded into two levels;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+ reg = <0x500 0x80>;
+ };
+
+ gpt0: timer@600 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x600 0x10>;
+ interrupts = <1 9 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt1: timer@610 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x610 0x10>;
+ interrupts = <1 10 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt2: timer@620 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x620 0x10>;
+ interrupts = <1 11 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt3: timer@630 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x630 0x10>;
+ interrupts = <1 12 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt4: timer@640 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x640 0x10>;
+ interrupts = <1 13 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt5: timer@650 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x650 0x10>;
+ interrupts = <1 14 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt6: timer@660 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x660 0x10>;
+ interrupts = <1 15 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpt7: timer@670 { // General Purpose Timer in GPIO mode
+ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+ reg = <0x670 0x10>;
+ interrupts = <1 16 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_simple: gpio@b00 {
+ compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+ reg = <0xb00 0x40>;
+ interrupts = <1 7 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio_wkup: gpio@c00 {
+ compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+ reg = <0xc00 0x40>;
+ interrupts = <1 8 0 0 3 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ dma-controller@1200 {
+ compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+ reg = <0x1200 0x80>;
+ interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
+ 3 4 0 3 5 0 3 6 0 3 7 0
+ 3 8 0 3 9 0 3 10 0 3 11 0
+ 3 12 0 3 13 0 3 14 0 3 15 0>;
+ };
+
+ xlb@1f00 {
+ compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+ reg = <0x1f00 0x100>;
+ };
+
+ serial@2000 { /* PSC1 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2000 0x100>;
+ interrupts = <2 1 0>;
+ };
+
+ serial@2200 { /* PSC2 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2200 0x100>;
+ interrupts = <2 2 0>;
+ };
+
+ serial@2c00 { /* PSC6 in UART mode */
+ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+ reg = <0x2c00 0x100>;
+ interrupts = <2 4 0>;
+ };
+
+ ethernet@3000 {
+ compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+ reg = <0x3000 0x400>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <2 5 0>;
+ phy-handle = <&phy0>;
+ };
+
+ mdio@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+ reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
+ interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
+
+ phy0: ethernet-phy@0 {
+ compatible = "intel,lxt971";
+ reg = <0>;
+ };
+ };
+
+ ata@3a00 {
+ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+ reg = <0x3a00 0x100>;
+ interrupts = <2 7 0>;
+ };
+
+ i2c@3d40 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ reg = <0x3d40 0x40>;
+ interrupts = <2 16 0>;
+ fsl,preserve-clocking;
+ clock-frequency = <400000>;
+
+ hwmon@2c {
+ compatible = "ad,adm9240";
+ reg = <0x2c>;
+ };
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ sram@8000 {
+ compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+ reg = <0x8000 0x4000>;
+ };
+ };
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xff800000 0x00800000
+ 1 0 0x80000000 0x00800000
+ 3 0 0x80000000 0x00800000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x00800000>;
+ bank-width = <2>;
+ device-width = <2>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "DTS";
+ reg = <0x0 0x00100000>;
+ };
+ partition@100000 {
+ label = "Kernel";
+ reg = <0x100000 0x00200000>;
+ };
+ partition@300000 {
+ label = "RootFS";
+ reg = <0x00300000 0x00200000>;
+ };
+ partition@500000 {
+ label = "user";
+ reg = <0x00500000 0x00200000>;
+ };
+ partition@700000 {
+ label = "U-Boot";
+ reg = <0x00700000 0x00040000>;
+ };
+ partition@740000 {
+ label = "Env";
+ reg = <0x00740000 0x00010000>;
+ };
+ partition@750000 {
+ label = "red. Env";
+ reg = <0x00750000 0x00010000>;
+ };
+ partition@760000 {
+ label = "reserve";
+ reg = <0x00760000 0x000a0000>;
+ };
+ };
+
+ };
+};
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:47:44 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:22 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:04 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:24 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:22 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:22 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
#
# CONFIG_EEPROM_AT24 is not set
CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# LED drivers
#
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:42 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:25 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
# CONFIG_USB_OHCI_HCD_PCI is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_BOOTX_TEXT is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Sat Apr 18 00:48:57 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:23 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_EXTRA_TARGETS=""
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_OF_PARTS is not set
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Mon Apr 20 11:06:25 2009
+# Linux kernel version: 2.6.32-rc4
+# Thu Oct 15 10:33:21 2009
#
# CONFIG_PPC64 is not set
#
# Processor support
#
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
# CONFIG_PPC_85xx is not set
# CONFIG_PPC_8xx is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_PPC_STD_MMU_32=y
# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_PPC_BESTCOMM=y
CONFIG_PPC_BESTCOMM_ATA=y
CONFIG_PPC_BESTCOMM_FEC=y
-# CONFIG_SIMPLE_GPIO is not set
+CONFIG_SIMPLE_GPIO=y
#
# Kernel options
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
+CONFIG_MAX_ACTIVE_REGIONS=32
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
+# CONFIG_PM_RUNTIME is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
CONFIG_EEPROM_AT24=y
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
CONFIG_FEC_MPC52xx=y
CONFIG_FEC_MPC52xx_MDIO=y
# CONFIG_ATL2 is not set
+# CONFIG_XILINX_EMACLITE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_TDO24M is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_SOC=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PCI=y
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
#
# Kernel hacking
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc5
+# Fri Oct 16 11:37:15 2009
+#
+CONFIG_PPC64=y
+
+#
+# Processor support
+#
+# CONFIG_PPC_BOOK3S_64 is not set
+CONFIG_PPC_BOOK3E_64=y
+CONFIG_PPC_BOOK3E=y
+CONFIG_PPC_FPU=y
+CONFIG_BOOKE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_MMU_NOHASH_64=y
+CONFIG_PPC_BOOK3E_MMU=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
+CONFIG_PPC_PERF_CTRS=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=32
+CONFIG_64BIT=y
+CONFIG_WORD_SIZE=64
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_COMPAT=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
+# CONFIG_DEFAULT_UIMAGE is not set
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+# CONFIG_TASK_XACCT is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=64
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUPS=y
+# CONFIG_CGROUP_DEBUG is not set
+# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_FREEZER is not set
+# CONFIG_CGROUP_DEVICE is not set
+CONFIG_CPUSETS=y
+CONFIG_PROC_PID_CPUSET=y
+# CONFIG_CGROUP_CPUACCT is not set
+# CONFIG_RESOURCE_COUNTERS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
+# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+CONFIG_BLOCK_COMPAT=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_U3_DART is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+
+#
+# CPU Frequency drivers
+#
+# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+
+#
+# Kernel options
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SCHED_HRTICK=y
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+CONFIG_COMPAT_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+CONFIG_BINFMT_MISC=m
+CONFIG_IOMMU_VMERGE=y
+CONFIG_IOMMU_HELPER=y
+# CONFIG_SWIOTLB is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_CRASH_DUMP is not set
+CONFIG_IRQ_ALL_CPUS=y
+# CONFIG_NUMA is not set
+CONFIG_MAX_ACTIVE_REGIONS=256
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_PPC_HAS_HASH_64K is not set
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
+# CONFIG_SCHED_SMT is not set
+CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+CONFIG_PCI_MSI=y
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_CARDBUS=y
+
+#
+# PC-card bridges
+#
+# CONFIG_YENTA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_HOTPLUG_PCI=m
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+# CONFIG_HAS_RAPIDIO is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
+CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_NET=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+CONFIG_NET_IPIP=y
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+# CONFIG_NF_CONNTRACK_SANE is not set
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NETFILTER_TPROXY=m
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_TIME is not set
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=y
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_FD=y
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=m
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+CONFIG_IDE_ATAPI=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECS is not set
+# CONFIG_BLK_DEV_DELKIN is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+
+#
+# PCI IDE chipsets support
+#
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_PCIBUS_ORDER=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+CONFIG_BLK_DEV_AMD74XX=y
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+CONFIG_SCSI_SRP_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
+# CONFIG_BE2ISCSI is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+CONFIG_SCSI_SYM53C8XX_MMIO=y
+CONFIG_SCSI_IPR=y
+CONFIG_SCSI_IPR_TRACE=y
+CONFIG_SCSI_IPR_DUMP=y
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+CONFIG_SCSI_LPFC=m
+# CONFIG_SCSI_LPFC_DEBUG_FS is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+CONFIG_SCSI_DEBUG=m
+# CONFIG_SCSI_PMCRAID is not set
+# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_BFA_FC is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
+CONFIG_SATA_SVW=y
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+# CONFIG_MULTICORE_RAID456 is not set
+CONFIG_MD_RAID6_PQ=y
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+# CONFIG_DM_DELAY is not set
+# CONFIG_DM_UEVENT is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+# CONFIG_IEEE1394_PCILYNX is not set
+CONFIG_IEEE1394_SBP2=m
+CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
+CONFIG_IEEE1394_ETH1394=m
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=m
+CONFIG_IEEE1394_DV1394=m
+# CONFIG_IEEE1394_VERBOSEDEBUG is not set
+# CONFIG_I2O is not set
+CONFIG_MACINTOSH_DRIVERS=y
+# CONFIG_MAC_EMUMOUSEBTN is not set
+CONFIG_WINDFARM=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_BROADCOM_PHY=m
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNGEM=y
+# CONFIG_CASSINI is not set
+CONFIG_NET_VENDOR_3COM=y
+CONFIG_VORTEX=y
+# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+CONFIG_E100=y
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_R6040 is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_VIA_RHINE is not set
+# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_ACENIC=y
+CONFIG_ACENIC_OMIT_TIGON_I=y
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+CONFIG_NETDEV_10000=y
+# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
+# CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
+# CONFIG_IXGBE is not set
+CONFIG_IXGB=m
+# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
+# CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
+# CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
+# CONFIG_MLX4_CORE is not set
+# CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
+CONFIG_TR=y
+CONFIG_IBMOL=y
+# CONFIG_3C359 is not set
+# CONFIG_TMS380TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+CONFIG_PPPOE=m
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NET_FC is not set
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO_XILINX_XPS_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_HANGCHECK_TIMER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_ALGOBIT=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+CONFIG_I2C_AMD8111=y
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DDC=y
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+CONFIG_FB_BACKLIGHT=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+CONFIG_FB_OF=y
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+CONFIG_FB_MATROX=y
+CONFIG_FB_MATROX_MILLENIUM=y
+CONFIG_FB_MATROX_MYSTIQUE=y
+CONFIG_FB_MATROX_G=y
+CONFIG_FB_MATROX_I2C=m
+CONFIG_FB_MATROX_MAVEN=m
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_BACKLIGHT=y
+# CONFIG_FB_RADEON_DEBUG is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
+CONFIG_FB_IBM_GXT4500=y
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_SEQUENCER=m
+CONFIG_SND_SEQ_DUMMY=m
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_PPC=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_USX2Y is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_PCMCIA=y
+# CONFIG_SND_VXPOCKET is not set
+# CONFIG_SND_PDAUDIOCF is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
+CONFIG_HID_KENSINGTON=y
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
+# CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_ZEROPLUS=y
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+CONFIG_USB_APPLEDISPLAY=m
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_INFINIBAND=m
+# CONFIG_INFINIBAND_USER_MAD is not set
+# CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
+CONFIG_INFINIBAND_MTHCA=m
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
+# CONFIG_INFINIBAND_IPATH is not set
+# CONFIG_INFINIBAND_AMSO1100 is not set
+# CONFIG_MLX4_INFINIBAND is not set
+# CONFIG_INFINIBAND_NES is not set
+CONFIG_INFINIBAND_IPOIB=m
+# CONFIG_INFINIBAND_IPOIB_CM is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
+# CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_ISER=m
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+# CONFIG_EDAC_CPC925 is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_GENERIC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_FS_XIP=y
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=y
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+CONFIG_REISERFS_FS_XATTR=y
+CONFIG_REISERFS_FS_POSIX_ACL=y
+CONFIG_REISERFS_FS_SECURITY=y
+CONFIG_JFS_FS=y
+CONFIG_JFS_POSIX_ACL=y
+CONFIG_JFS_SECURITY=y
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+CONFIG_XFS_POSIX_ACL=y
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+# CONFIG_JOLIET is not set
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+CONFIG_HFS_FS=m
+CONFIG_HFSPLUS_FS=m
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_XPRT_RDMA=m
+CONFIG_RPCSEC_GSS_KRB5=y
+CONFIG_RPCSEC_GSS_SPKM3=m
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_LATENCYTOP=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_SCHED_TRACER=y
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
+CONFIG_CODE_PATCHING_SELFTEST=y
+CONFIG_FTR_FIXUP_SELFTEST=y
+CONFIG_MSI_BITMAP_SELFTEST=y
+CONFIG_XMON=y
+# CONFIG_XMON_DEFAULT is not set
+CONFIG_XMON_DISASSEMBLY=y
+CONFIG_DEBUGGER=y
+CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=y
+CONFIG_ASYNC_CORE=y
+CONFIG_ASYNC_MEMCPY=y
+CONFIG_ASYNC_XOR=y
+CONFIG_ASYNC_PQ=y
+CONFIG_ASYNC_RAID6_RECOV=y
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
/* DMA operations on that device */
struct dma_map_ops *dma_ops;
- void *dma_data;
+
+ /*
+ * When an iommu is in use, dma_data is used as a ptr to the base of the
+ * iommu_table. Otherwise, it is a simple numerical offset.
+ */
+ union {
+ dma_addr_t dma_offset;
+ void *iommu_table_base;
+ } dma_data;
+
#ifdef CONFIG_SWIOTLB
dma_addr_t max_direct_dma_addr;
#endif
extern void dma_direct_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
-extern unsigned long get_dma_direct_offset(struct device *dev);
#ifdef CONFIG_NOT_COHERENT_CACHE
/*
dev->archdata.dma_ops = ops;
}
+/*
+ * get_dma_offset()
+ *
+ * Get the dma offset on configurations where the dma address can be determined
+ * from the physical address by looking at a simple offset. Direct dma and
+ * swiotlb use this function, but it is typically not used by implementations
+ * with an iommu.
+ */
+static inline dma_addr_t get_dma_offset(struct device *dev)
+{
+ if (dev)
+ return dev->archdata.dma_data.dma_offset;
+
+ return PCI_DRAM_OFFSET;
+}
+
+static inline void set_dma_offset(struct device *dev, dma_addr_t off)
+{
+ if (dev)
+ dev->archdata.dma_data.dma_offset = off;
+}
+
/* this will be removed soon */
#define flush_write_buffers()
static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
{
- return paddr + get_dma_direct_offset(dev);
+ return paddr + get_dma_offset(dev);
}
static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
{
- return daddr - get_dma_direct_offset(dev);
+ return daddr - get_dma_offset(dev);
}
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define FW_FEATURE_VIO ASM_CONST(0x0000000000004000)
#define FW_FEATURE_RDMA ASM_CONST(0x0000000000008000)
#define FW_FEATURE_LLAN ASM_CONST(0x0000000000010000)
-#define FW_FEATURE_BULK ASM_CONST(0x0000000000020000)
+#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000000020000)
#define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000)
#define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000)
#define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000)
#define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000)
#define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000)
#define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000)
-#define FW_FEATURE_BULK_REMOVE ASM_CONST(0x0000000002000000)
-#define FW_FEATURE_CMO ASM_CONST(0x0000000004000000)
+#define FW_FEATURE_CMO ASM_CONST(0x0000000002000000)
#ifndef __ASSEMBLY__
FW_FEATURE_PERF | FW_FEATURE_DUMP | FW_FEATURE_INTERRUPT |
FW_FEATURE_MIGRATE | FW_FEATURE_PERFMON | FW_FEATURE_CRQ |
FW_FEATURE_VIO | FW_FEATURE_RDMA | FW_FEATURE_LLAN |
- FW_FEATURE_BULK | FW_FEATURE_XDABR | FW_FEATURE_MULTITCE |
- FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO,
+ FW_FEATURE_BULK_REMOVE | FW_FEATURE_XDABR |
+ FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR |
+ FW_FEATURE_CMO,
FW_FEATURE_PSERIES_ALWAYS = 0,
FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR,
--- /dev/null
+/*
+ * Freescale MPC83XX / MPC85XX DMA Controller
+ *
+ * Copyright (c) 2009 Ira W. Snyder <iws@ovro.caltech.edu>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ARCH_POWERPC_ASM_FSLDMA_H__
+#define __ARCH_POWERPC_ASM_FSLDMA_H__
+
+#include <linux/dmaengine.h>
+
+/*
+ * Definitions for the Freescale DMA controller's DMA_SLAVE implemention
+ *
+ * The Freescale DMA_SLAVE implementation was designed to handle many-to-many
+ * transfers. An example usage would be an accelerated copy between two
+ * scatterlists. Another example use would be an accelerated copy from
+ * multiple non-contiguous device buffers into a single scatterlist.
+ *
+ * A DMA_SLAVE transaction is defined by a struct fsl_dma_slave. This
+ * structure contains a list of hardware addresses that should be copied
+ * to/from the scatterlist passed into device_prep_slave_sg(). The structure
+ * also has some fields to enable hardware-specific features.
+ */
+
+/**
+ * struct fsl_dma_hw_addr
+ * @entry: linked list entry
+ * @address: the hardware address
+ * @length: length to transfer
+ *
+ * Holds a single physical hardware address / length pair for use
+ * with the DMAEngine DMA_SLAVE API.
+ */
+struct fsl_dma_hw_addr {
+ struct list_head entry;
+
+ dma_addr_t address;
+ size_t length;
+};
+
+/**
+ * struct fsl_dma_slave
+ * @addresses: a linked list of struct fsl_dma_hw_addr structures
+ * @request_count: value for DMA request count
+ * @src_loop_size: setup and enable constant source-address DMA transfers
+ * @dst_loop_size: setup and enable constant destination address DMA transfers
+ * @external_start: enable externally started DMA transfers
+ * @external_pause: enable externally paused DMA transfers
+ *
+ * Holds a list of address / length pairs for use with the DMAEngine
+ * DMA_SLAVE API implementation for the Freescale DMA controller.
+ */
+struct fsl_dma_slave {
+
+ /* List of hardware address/length pairs */
+ struct list_head addresses;
+
+ /* Support for extra controller features */
+ unsigned int request_count;
+ unsigned int src_loop_size;
+ unsigned int dst_loop_size;
+ bool external_start;
+ bool external_pause;
+};
+
+/**
+ * fsl_dma_slave_append - add an address/length pair to a struct fsl_dma_slave
+ * @slave: the &struct fsl_dma_slave to add to
+ * @address: the hardware address to add
+ * @length: the length of bytes to transfer from @address
+ *
+ * Add a hardware address/length pair to a struct fsl_dma_slave. Returns 0 on
+ * success, -ERRNO otherwise.
+ */
+static inline int fsl_dma_slave_append(struct fsl_dma_slave *slave,
+ dma_addr_t address, size_t length)
+{
+ struct fsl_dma_hw_addr *addr;
+
+ addr = kzalloc(sizeof(*addr), GFP_ATOMIC);
+ if (!addr)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&addr->entry);
+ addr->address = address;
+ addr->length = length;
+
+ list_add_tail(&addr->entry, &slave->addresses);
+ return 0;
+}
+
+/**
+ * fsl_dma_slave_free - free a struct fsl_dma_slave
+ * @slave: the struct fsl_dma_slave to free
+ *
+ * Free a struct fsl_dma_slave and all associated address/length pairs
+ */
+static inline void fsl_dma_slave_free(struct fsl_dma_slave *slave)
+{
+ struct fsl_dma_hw_addr *addr, *tmp;
+
+ if (slave) {
+ list_for_each_entry_safe(addr, tmp, &slave->addresses, entry) {
+ list_del(&addr->entry);
+ kfree(addr);
+ }
+
+ kfree(slave);
+ }
+}
+
+/**
+ * fsl_dma_slave_alloc - allocate a struct fsl_dma_slave
+ * @gfp: the flags to pass to kmalloc when allocating this structure
+ *
+ * Allocate a struct fsl_dma_slave for use by the DMA_SLAVE API. Returns a new
+ * struct fsl_dma_slave on success, or NULL on failure.
+ */
+static inline struct fsl_dma_slave *fsl_dma_slave_alloc(gfp_t gfp)
+{
+ struct fsl_dma_slave *slave;
+
+ slave = kzalloc(sizeof(*slave), gfp);
+ if (!slave)
+ return NULL;
+
+ INIT_LIST_HEAD(&slave->addresses);
+ return slave;
+}
+
+#endif /* __ARCH_POWERPC_ASM_FSLDMA_H__ */
struct scatterlist;
+static inline void set_iommu_table_base(struct device *dev, void *base)
+{
+ dev->archdata.dma_data.iommu_table_base = base;
+}
+
+static inline void *get_iommu_table_base(struct device *dev)
+{
+ return dev->archdata.dma_data.iommu_table_base;
+}
+
/* Frees table for an individual device node */
extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
void release_pmc_hardware(void);
void ppc_enable_pmcs(void);
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
#include <asm/lppaca.h>
static inline void ppc_set_pmu_inuse(int inuse)
#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
+#define _PAGE_SPECIAL 0x020 /* software: Special page */
#define _PAGE_RW 0x040 /* software: Writes permitted */
#define _PAGE_DIRTY 0x080 /* software: dirty page */
#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
#define _PAGE_FILE 0x0002 /* when !present: nonlinear file mapping */
#define _PAGE_NO_CACHE 0x0002 /* I: cache inhibit */
#define _PAGE_SHARED 0x0004 /* No ASID (context) compare */
+#define _PAGE_SPECIAL 0x0008 /* SW entry, forced to 0 by the TLB miss */
/* These five software bits must be masked out when the entry is loaded
* into the TLB.
#ifndef _PAGE_WRITETHRU
#define _PAGE_WRITETHRU 0
#endif
-#ifndef _PAGE_SPECIAL
-#define _PAGE_SPECIAL 0
-#endif
#ifndef _PAGE_4K_PFN
#define _PAGE_4K_PFN 0
#endif
#define HAVE_PAGE_AGP
/* Advertise support for _PAGE_SPECIAL */
-#ifdef _PAGE_SPECIAL
#define __HAVE_ARCH_PTE_SPECIAL
-#endif
extern struct smp_ops_t *smp_ops;
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
/* Definitions relative to the secondary CPU spin loop
* and entry point. Not all of them exist on both 32 and
#define parent_node(node) (node)
-static inline cpumask_t node_to_cpumask(int node)
-{
- return numa_cpumask_lookup_table[node];
-}
-
#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
int of_node_to_nid(struct device_node *device);
}
#endif
-#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \
- CPU_MASK_ALL : \
- node_to_cpumask(pcibus_to_node(bus)) \
- )
-
#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \
cpu_all_mask : \
cpumask_of_node(pcibus_to_node(bus)))
#ifdef CONFIG_PPC64
#include <asm/smp.h>
-#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu))
-#define topology_core_siblings(cpu) (per_cpu(cpu_core_map, cpu))
#define topology_thread_cpumask(cpu) (&per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (&per_cpu(cpu_core_map, cpu))
#define topology_core_id(cpu) (cpu_to_core_id(cpu))
.cpu_setup = __setup_cpu_750,
.machine_check = machine_check_generic,
.platform = "ppc750",
+ .oprofile_cpu_type = "ppc/750",
+ .oprofile_type = PPC_OPROFILE_G4,
},
{ /* 745/755 */
.pvr_mask = 0xfffff000,
static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
{
- return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
+ return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
dma_handle, device_to_mask(dev), flag,
dev_to_node(dev));
}
static void dma_iommu_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
- iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
+ iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
}
/* Creates TCEs for a user provided buffer. The user buffer must be
enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- return iommu_map_page(dev, dev->archdata.dma_data, page, offset, size,
- device_to_mask(dev), direction, attrs);
+ return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
+ size, device_to_mask(dev), direction, attrs);
}
size_t size, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- iommu_unmap_page(dev->archdata.dma_data, dma_handle, size, direction,
+ iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
attrs);
}
int nelems, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+ return iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
device_to_mask(dev), direction, attrs);
}
int nelems, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+ iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems, direction,
attrs);
}
/* We support DMA to/from any memory page via the iommu */
static int dma_iommu_dma_supported(struct device *dev, u64 mask)
{
- struct iommu_table *tbl = dev->archdata.dma_data;
+ struct iommu_table *tbl = get_iommu_table_base(dev);
if (!tbl || tbl->it_offset > mask) {
printk(KERN_INFO
* default the offset is PCI_DRAM_OFFSET.
*/
-unsigned long get_dma_direct_offset(struct device *dev)
-{
- if (dev)
- return (unsigned long)dev->archdata.dma_data;
-
- return PCI_DRAM_OFFSET;
-}
void *dma_direct_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t flag)
ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
if (ret == NULL)
return NULL;
- *dma_handle += get_dma_direct_offset(dev);
+ *dma_handle += get_dma_offset(dev);
return ret;
#else
struct page *page;
return NULL;
ret = page_address(page);
memset(ret, 0, size);
- *dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
+ *dma_handle = virt_to_abs(ret) + get_dma_offset(dev);
return ret;
#endif
int i;
for_each_sg(sgl, sg, nents, i) {
- sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+ sg->dma_address = sg_phys(sg) + get_dma_offset(dev);
sg->dma_length = sg->length;
__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
}
{
BUG_ON(dir == DMA_NONE);
__dma_sync_page(page, offset, size, dir);
- return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+ return page_to_phys(page) + offset + get_dma_offset(dev);
}
static inline void dma_direct_unmap_page(struct device *dev,
cmpdi r0,0
crandc eq,cr1*4+eq,eq
bne restore
- /* here we are preempting the current task */
-1:
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl .trace_hardirqs_on
- /* Note: we just clobbered r10 which used to contain the previous
- * MSR before the hard-disabling done by the caller of do_work.
- * We don't have that value anymore, but it doesn't matter as
- * we will hard-enable unconditionally, we can just reload the
- * current MSR into r10
+
+ /* Here we are preempting the current task.
+ *
+ * Ensure interrupts are soft-disabled. We also properly mark
+ * the PACA to reflect the fact that they are hard-disabled
+ * and trace the change
*/
- mfmsr r10
-#endif /* CONFIG_TRACE_IRQFLAGS */
- li r0,1
+ li r0,0
stb r0,PACASOFTIRQEN(r13)
stb r0,PACAHARDIRQEN(r13)
+ TRACE_DISABLE_INTS
+
+ /* Call the scheduler with soft IRQs off */
+1: bl .preempt_schedule_irq
+
+ /* Hard-disable interrupts again (and update PACA) */
#ifdef CONFIG_PPC_BOOK3E
- wrteei 1
- bl .preempt_schedule
wrteei 0
#else
- ori r10,r10,MSR_EE
- mtmsrd r10,1 /* reenable interrupts */
- bl .preempt_schedule
mfmsr r10
- clrrdi r9,r1,THREAD_SHIFT
- rldicl r10,r10,48,1 /* disable interrupts again */
+ rldicl r10,r10,48,1
rotldi r10,r10,16
mtmsrd r10,1
#endif /* CONFIG_PPC_BOOK3E */
+ li r0,0
+ stb r0,PACAHARDIRQEN(r13)
+
+ /* Re-test flags and eventually loop */
+ clrrdi r9,r1,THREAD_SHIFT
ld r4,TI_FLAGS(r9)
andi. r0,r4,_TIF_NEED_RESCHED
bne 1b
b restore
user_work:
-#endif
+#endif /* CONFIG_PREEMPT */
+
/* Enable interrupts */
#ifdef CONFIG_PPC_BOOK3E
wrteei 1
* We are in a module using the module's TOC.
* Switch to our TOC to run inside the core kernel.
*/
- LOAD_REG_IMMEDIATE(r4,ftrace_return_to_handler)
- ld r2, 8(r4)
+ ld r2, PACATOC(r13)
bl .ftrace_return_to_handler
nop
#include <asm/cputable.h>
#include <asm/setup.h>
#include <asm/thread_info.h>
-#include <asm/reg.h>
#include <asm/exception-64e.h>
#include <asm/bug.h>
#include <asm/irqflags.h>
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
{
unsigned long *ptr = gdb_regs;
int reg;
-#ifdef CONFIG_SPE
- union {
- u32 v32[2];
- u64 v64;
- } acc;
-#endif
for (reg = 0; reg < 32; reg++)
UNPACK64(regs->gpr[reg], ptr);
#include <linux/kexec.h>
#include <linux/smp.h>
#include <linux/thread_info.h>
+#include <linux/init_task.h>
#include <linux/errno.h>
#include <asm/page.h>
* We could use a smaller stack if we don't care about anything using
* current, but that audit has not been performed.
*/
-static union thread_union kexec_stack
- __attribute__((__section__(".data.init_task"))) = { };
+static union thread_union kexec_stack __init_task_data =
+ { };
/* Our assembly helper, in kexec_stub.S */
extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start,
/* Hook up default DMA ops */
sd->dma_ops = pci_dma_ops;
- sd->dma_data = (void *)PCI_DRAM_OFFSET;
+ set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
/* Additional platform DMA/iommu setup */
if (ppc_md.pci_dma_dev_setup)
* Reparent resource children of pr that conflict with res
* under res, and make res replace those children.
*/
-static int __init reparent_resources(struct resource *parent,
+static int reparent_resources(struct resource *parent,
struct resource *res)
{
struct resource *p, **pp;
* to do an appropriate TLB flush here too
*/
if (bus->self) {
+#ifdef CONFIG_PPC_STD_MMU_64
struct resource *res = bus->resource[0];
+#endif
pr_debug("IO unmapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
static inline u32 perf_get_misc_flags(struct pt_regs *regs)
{
unsigned long mmcra = regs->dsisr;
+ unsigned long sihv = MMCRA_SIHV;
+ unsigned long sipr = MMCRA_SIPR;
if (TRAP(regs) != 0xf00)
return 0; /* not a PMU interrupt */
if (ppmu->flags & PPMU_ALT_SIPR) {
- if (mmcra & POWER6_MMCRA_SIHV)
- return PERF_RECORD_MISC_HYPERVISOR;
- return (mmcra & POWER6_MMCRA_SIPR) ?
- PERF_RECORD_MISC_USER : PERF_RECORD_MISC_KERNEL;
+ sihv = POWER6_MMCRA_SIHV;
+ sipr = POWER6_MMCRA_SIPR;
}
- if (mmcra & MMCRA_SIHV)
+
+ /* PR has priority over HV, so order below is important */
+ if (mmcra & sipr)
+ return PERF_RECORD_MISC_USER;
+ if ((mmcra & sihv) && (freeze_events_kernel != MMCR0_FCHV))
return PERF_RECORD_MISC_HYPERVISOR;
- return (mmcra & MMCRA_SIPR) ? PERF_RECORD_MISC_USER :
- PERF_RECORD_MISC_KERNEL;
+ return PERF_RECORD_MISC_KERNEL;
}
/*
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
int curr_frame = current->curr_ret_stack;
extern void return_to_handler(void);
- unsigned long addr = (unsigned long)return_to_handler;
+ unsigned long rth = (unsigned long)return_to_handler;
+ unsigned long mrth = -1;
#ifdef CONFIG_PPC64
- addr = *(unsigned long*)addr;
+ extern void mod_return_to_handler(void);
+ rth = *(unsigned long *)rth;
+ mrth = (unsigned long)mod_return_to_handler;
+ mrth = *(unsigned long *)mrth;
#endif
#endif
if (!firstframe || ip != lr) {
printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip);
#ifdef CONFIG_FUNCTION_GRAPH_TRACER
- if (ip == addr && curr_frame >= 0) {
+ if ((ip == rth || ip == mrth) && curr_frame >= 0) {
printk(" (%pS)",
(void *)current->ret_stack[curr_frame].ret);
curr_frame--;
unsigned long arch_randomize_brk(struct mm_struct *mm)
{
- unsigned long ret = PAGE_ALIGN(mm->brk + brk_rnd());
+ unsigned long base = mm->brk;
+ unsigned long ret;
+
+#ifdef CONFIG_PPC_STD_MMU_64
+ /*
+ * If we are using 1TB segments and we are allowed to randomise
+ * the heap, we can put it above 1TB so it is backed by a 1TB
+ * segment. Otherwise the heap will be in the bottom 1TB
+ * which always uses 256MB segments and this may result in a
+ * performance penalty.
+ */
+ if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T))
+ base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T);
+#endif
+
+ ret = PAGE_ALIGN(base + brk_rnd());
if (ret < mm->brk)
return mm->brk;
root = call_prom("open", 1, 1, ADDR("/"));
if (root != 0) {
/* try calling the ibm,client-architecture-support method */
- prom_printf("Calling ibm,client-architecture...");
+ prom_printf("Calling ibm,client-architecture-support...");
if (call_prom_ret("call-method", 3, 2, &ret,
ADDR("ibm,client-architecture-support"),
root,
return;
}
call_prom("close", 1, 0, root);
+ prom_printf(" not implemented\n");
}
/* no ibm,client-architecture-support call, try the old way */
#include <linux/seq_file.h>
#include <linux/ioport.h>
#include <linux/console.h>
-#include <linux/utsname.h>
#include <linux/screen_info.h>
#include <linux/root_dev.h>
#include <linux/notifier.h>
for (j = 0; j < nthreads && cpu < NR_CPUS; j++) {
DBG(" thread %d -> cpu %d (hard id %d)\n",
j, cpu, intserv[j]);
- cpu_set(cpu, cpu_present_map);
+ set_cpu_present(cpu, true);
set_hard_smp_processor_id(cpu, intserv[j]);
- cpu_set(cpu, cpu_possible_map);
+ set_cpu_possible(cpu, true);
cpu++;
}
}
maxcpus);
for (cpu = 0; cpu < maxcpus; cpu++)
- cpu_set(cpu, cpu_possible_map);
+ set_cpu_possible(cpu, true);
out:
of_node_put(dn);
}
#include <asm/cache.h>
#include <asm/page.h>
#include <asm/mmu.h>
-#include <asm/mmu-hash64.h>
#include <asm/firmware.h>
#include <asm/xmon.h>
#include <asm/udbg.h>
smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNC_SINGLE);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
unsigned int cpu;
- for_each_cpu_mask(cpu, mask)
+ for_each_cpu(cpu, mask)
smp_ops->message_pass(cpu, PPC_MSG_CALL_FUNCTION);
}
{
BUG_ON(smp_processor_id() != boot_cpuid);
- cpu_set(boot_cpuid, cpu_online_map);
+ set_cpu_online(boot_cpuid, true);
cpu_set(boot_cpuid, per_cpu(cpu_sibling_map, boot_cpuid));
cpu_set(boot_cpuid, per_cpu(cpu_core_map, boot_cpuid));
#ifdef CONFIG_PPC64
if (cpu == boot_cpuid)
return -EBUSY;
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
#ifdef CONFIG_PPC64
vdso_data->processorCount--;
fixup_irqs(cpu_online_map);
smp_wmb();
while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE)
cpu_relax();
- cpu_set(cpu, cpu_online_map);
+ set_cpu_online(cpu, true);
local_irq_enable();
}
#endif
ipi_call_lock();
notify_cpu_starting(cpu);
- cpu_set(cpu, cpu_online_map);
+ set_cpu_online(cpu, true);
/* Update sibling maps */
base = cpu_first_thread_in_core(cpu);
for (i = 0; i < threads_per_core; i++) {
#include <linux/signal.h>
#include <linux/resource.h>
#include <linux/times.h>
-#include <linux/utsname.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/sem.h>
return ppc_md.set_rtc_time(&tm);
}
-void read_persistent_clock(struct timespec *ts)
+static void __read_persistent_clock(struct timespec *ts)
{
struct rtc_time tm;
static int first = 1;
return;
}
ppc_md.get_rtc_time(&tm);
+
ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
tm.tm_hour, tm.tm_min, tm.tm_sec);
}
+void read_persistent_clock(struct timespec *ts)
+{
+ __read_persistent_clock(ts);
+
+ /* Sanitize it in case real time clock is set below EPOCH */
+ if (ts->tv_sec < 0) {
+ ts->tv_sec = 0;
+ ts->tv_nsec = 0;
+ }
+
+}
+
/* clocksource code */
static cycle_t rtc_read(struct clocksource *cs)
{
+
/*
* Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp.
* <benh@kernel.crashing.org>
/* Max supported size for symbol names */
#define MAX_SYMNAME 64
+/* The alignment of the vDSO */
+#define VDSO_ALIGNMENT (1 << 16)
+
extern char vdso32_start, vdso32_end;
static void *vdso32_kbase = &vdso32_start;
static unsigned int vdso32_pages;
static union {
struct vdso_data data;
u8 page[PAGE_SIZE];
-} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+} vdso_data_store __page_aligned_data;
struct vdso_data *vdso_data = &vdso_data_store.data;
/* Format of the patch table */
* pick a base address for the vDSO in process space. We try to put it
* at vdso_base which is the "natural" base for it, but we might fail
* and end up putting it elsewhere.
+ * Add enough to the size so that the result can be aligned.
*/
down_write(&mm->mmap_sem);
vdso_base = get_unmapped_area(NULL, vdso_base,
- vdso_pages << PAGE_SHIFT, 0, 0);
+ (vdso_pages << PAGE_SHIFT) +
+ ((VDSO_ALIGNMENT - 1) & PAGE_MASK),
+ 0, 0);
if (IS_ERR_VALUE(vdso_base)) {
rc = vdso_base;
goto fail_mmapsem;
}
+ /* Add required alignment. */
+ vdso_base = ALIGN(vdso_base, VDSO_ALIGNMENT);
+
+ /*
+ * Put vDSO base into mm struct. We need to do this before calling
+ * install_special_mapping or the perf counter mmap tracking code
+ * will fail to recognise it as a vDSO (since arch_vma_name fails).
+ */
+ current->mm->context.vdso_base = vdso_base;
+
/*
* our vma flags don't have VM_WRITE so by default, the process isn't
* allowed to write those pages.
VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
VM_ALWAYSDUMP,
vdso_pagelist);
- if (rc)
+ if (rc) {
+ current->mm->context.vdso_base = 0;
goto fail_mmapsem;
-
- /* Put vDSO base into mm struct */
- current->mm->context.vdso_base = vdso_base;
+ }
up_write(&mm->mmap_sem);
return 0;
EXTRA_CFLAGS := -shared -fno-common -fno-builtin
EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
EXTRA_AFLAGS := -D__VDSO32__ -s
obj-y += vdso32_wrapper.o
. = ALIGN(16);
.text : {
*(.text .stub .text.* .gnu.linkonce.t.* __ftr_alt_*)
- }
+ } :text
PROVIDE(__etext = .);
PROVIDE(_etext = .);
PROVIDE(etext = .);
.fixup : { *(.fixup) }
.dynamic : { *(.dynamic) } :text :dynamic
- .got : { *(.got) }
+ .got : { *(.got) } :text
.plt : { *(.plt) }
_end = .;
#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/page.h>
- .section ".data.page_aligned"
+ __PAGE_ALIGNED_DATA
.globl vdso32_start, vdso32_end
.balign PAGE_SIZE
EXTRA_CFLAGS := -shared -fno-common -fno-builtin
EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
EXTRA_AFLAGS := -D__VDSO64__ -s
obj-y += vdso64_wrapper.o
#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/page.h>
- .section ".data.page_aligned"
+ __PAGE_ALIGNED_DATA
.globl vdso64_start, vdso64_end
.balign PAGE_SIZE
return NULL;
tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
+ if (tbl == NULL)
+ return NULL;
of_parse_dma_window(dev->dev.archdata.of_node, dma_window,
&tbl->it_index, &offset, &size);
vio_cmo_set_dma_ops(viodev);
else
viodev->dev.archdata.dma_ops = &dma_iommu_ops;
- viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
+ set_iommu_table_base(&viodev->dev, vio_build_iommu_table(viodev));
set_dev_node(&viodev->dev, of_node_to_nid(of_node));
/* init generic 'struct device' fields: */
#include <asm/page.h>
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
+#include <asm/thread_info.h>
ENTRY(_stext)
/* Read-only data */
RODATA
- /* Exception & bug tables */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(0)
NOTES :kernel :notes
*/
. = ALIGN(PAGE_SIZE);
__init_begin = .;
-
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- } :kernel
+ INIT_TEXT_SECTION(PAGE_SIZE) :kernel
/* .exit.text is discarded at runtime, not link time,
* to deal with references from __bug_table
#endif
}
- . = ALIGN(16);
.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
+ INIT_SETUP(16)
}
.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
+ INIT_CALLS
+ }
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ CON_INITCALL
}
SECURITY_INIT
__stop___fw_ftr_fixup = .;
}
#endif
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
+ INIT_RAM_FS
}
-#endif
+
PERCPU(PAGE_SIZE)
. = ALIGN(8);
#endif
/* The initial task and kernel stack */
-#ifdef CONFIG_PPC32
- . = ALIGN(8192);
-#else
- . = ALIGN(16384);
-#endif
.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
+ INIT_TASK_DATA(THREAD_SIZE)
}
- . = ALIGN(PAGE_SIZE);
.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
+ PAGE_ALIGNED_DATA(PAGE_SIZE)
}
- . = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
+ CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
}
- . = ALIGN(L1_CACHE_BYTES);
.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
+ READ_MOSTLY_DATA(L1_CACHE_BYTES)
}
. = ALIGN(PAGE_SIZE);
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
+ NOSAVE_DATA
}
. = ALIGN(PAGE_SIZE);
* And finally the bss
*/
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- __bss_start = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- __bss_stop = .;
- }
+ BSS_SECTION(0, 0, 0)
. = ALIGN(PAGE_SIZE);
_end = . ;
return single_open(file, kvmppc_exit_timing_show, inode->i_private);
}
-static struct file_operations kvmppc_exit_timing_fops = {
+static const struct file_operations kvmppc_exit_timing_fops = {
.owner = THIS_MODULE,
.open = kvmppc_exit_timing_open,
.read = seq_read,
static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type)
{
/* type has to be known at build time for optimization */
+
+ /* The BUILD_BUG_ON below breaks in funny ways, commented out
+ * for now ... -BenH
BUILD_BUG_ON(__builtin_constant_p(type));
+ */
switch (type) {
case EXT_INTR_EXITS:
vcpu->stat.ext_intr_exits++;
* also clear mm->cpu_vm_mask bits when processes are migrated
*/
-#define DEBUG_MAP_CONSISTENCY
-#define DEBUG_CLAMP_LAST_CONTEXT 31
+//#define DEBUG_MAP_CONSISTENCY
+//#define DEBUG_CLAMP_LAST_CONTEXT 31
//#define DEBUG_HARDER
/* We don't use DEBUG because it tends to be compiled in always nowadays
#include <asm/tlbflush.h>
#include <asm/tlb.h>
+#include "mmu_decl.h"
+
DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
#ifdef CONFIG_SMP
* support falls into the same category.
*/
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
{
pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
if (!pg)
return pte;
if (!test_bit(PG_arch_1, &pg->flags)) {
+#ifdef CONFIG_8xx
+ /* On 8xx, cache control instructions (particularly
+ * "dcbst" from flush_dcache_icache) fault as write
+ * operation if there is an unpopulated TLB entry
+ * for the address in question. To workaround that,
+ * we invalidate the TLB here, thus avoiding dcbst
+ * misbehaviour.
+ */
+ /* 8xx doesn't care about PID, size or ind args */
+ _tlbil_va(addr, 0, 0, 0);
+#endif /* CONFIG_8xx */
flush_dcache_icache_page(pg);
set_bit(PG_arch_1, &pg->flags);
}
* as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
* instead we "filter out" the exec permission for non clean pages.
*/
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
{
struct page *pg;
* this context might not have been activated yet when this
* is called.
*/
- pte = set_pte_filter(pte);
+ pte = set_pte_filter(pte, addr);
/* Perform the setting of the PTE */
__set_pte_at(mm, addr, ptep, pte, 0);
1:
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
- /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
- * will be patched by the kernel at boot
+ /* vmalloc mapping gets the encoding from the PACA as the mapping
+ * can be demoted from 64K -> 4K dynamically on some machines
*/
-BEGIN_FTR_SECTION
- /* check whether this is in vmalloc or ioremap space */
clrldi r11,r10,48
cmpldi r11,(VMALLOC_SIZE >> 28) - 1
bgt 5f
lhz r11,PACAVMALLOCSLLP(r13)
b 6f
5:
-END_FTR_SECTION_IFCLR(CPU_FTR_CI_LARGE_PAGE)
-_GLOBAL(slb_miss_kernel_load_io)
+ /* IO mapping */
+ _GLOBAL(slb_miss_kernel_load_io)
li r11,0
6:
BEGIN_FTR_SECTION
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/pgtable.h>
-#include <asm/reg.h>
#include <asm/exception-64e.h>
#include <asm/ppc-opcode.h>
/* list of the supported boards */
static char *board[] __initdata = {
"intercontrol,digsy-mtc",
+ "manroland,mucmc52",
+ "manroland,uc101",
"phytec,pcm030",
"phytec,pcm032",
"promess,motionpro",
printk(KERN_ERR
"axon_msi: couldn't parse dcr properties on %s\n",
dn->full_name);
- goto out;
+ goto out_free_msic;
}
msic->dcr_host = dcr_map(dn, dcr_base, dcr_len);
static void celleb_dma_dev_setup(struct device *dev)
{
dev->archdata.dma_ops = get_pci_dma_ops();
- dev->archdata.dma_data = (void *)celleb_dma_direct_offset;
+ set_dma_offset(dev, celleb_dma_direct_offset);
}
static void celleb_pci_dma_dev_setup(struct pci_dev *pdev)
static void cell_dma_dev_setup(struct device *dev)
{
- struct dev_archdata *archdata = &dev->archdata;
-
/* Order is important here, these are not mutually exclusive */
if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
cell_dma_dev_setup_fixed(dev);
else if (get_pci_dma_ops() == &dma_iommu_ops)
- archdata->dma_data = cell_get_iommu_table(dev);
+ set_iommu_table_base(dev, cell_get_iommu_table(dev));
else if (get_pci_dma_ops() == &dma_direct_ops)
- archdata->dma_data = (void *)cell_dma_direct_offset;
+ set_dma_offset(dev, cell_dma_direct_offset);
else
BUG();
}
static void cell_dma_dev_setup_fixed(struct device *dev)
{
- struct dev_archdata *archdata = &dev->archdata;
u64 addr;
addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
- archdata->dma_data = (void *)addr;
+ set_dma_offset(dev, addr);
dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
}
__simple_attr_check_format(__fmt, 0ull); \
return spufs_attr_open(inode, file, __get, __set, __fmt); \
} \
-static struct file_operations __fops = { \
+static const struct file_operations __fops = { \
.owner = THIS_MODULE, \
.open = __fops ## _open, \
.release = spufs_attr_release, \
return len;
}
-static struct vm_operations_struct spufs_mem_mmap_vmops = {
+static const struct vm_operations_struct spufs_mem_mmap_vmops = {
.fault = spufs_mem_mmap_fault,
.access = spufs_mem_mmap_access,
};
return spufs_ps_fault(vma, vmf, 0x4000, SPUFS_CNTL_MAP_SIZE);
}
-static struct vm_operations_struct spufs_cntl_mmap_vmops = {
+static const struct vm_operations_struct spufs_cntl_mmap_vmops = {
.fault = spufs_cntl_mmap_fault,
};
#endif
}
-static struct vm_operations_struct spufs_signal1_mmap_vmops = {
+static const struct vm_operations_struct spufs_signal1_mmap_vmops = {
.fault = spufs_signal1_mmap_fault,
};
#endif
}
-static struct vm_operations_struct spufs_signal2_mmap_vmops = {
+static const struct vm_operations_struct spufs_signal2_mmap_vmops = {
.fault = spufs_signal2_mmap_fault,
};
return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_MSS_MAP_SIZE);
}
-static struct vm_operations_struct spufs_mss_mmap_vmops = {
+static const struct vm_operations_struct spufs_mss_mmap_vmops = {
.fault = spufs_mss_mmap_fault,
};
return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_PS_MAP_SIZE);
}
-static struct vm_operations_struct spufs_psmap_mmap_vmops = {
+static const struct vm_operations_struct spufs_psmap_mmap_vmops = {
.fault = spufs_psmap_mmap_fault,
};
return spufs_ps_fault(vma, vmf, 0x3000, SPUFS_MFC_MAP_SIZE);
}
-static struct vm_operations_struct spufs_mfc_mmap_vmops = {
+static const struct vm_operations_struct spufs_mfc_mmap_vmops = {
.fault = spufs_mfc_mmap_fault,
};
EXTRA_CFLAGS += -mno-minimal-toc
-extra-y += dt.o
-
obj-y += exception.o
-obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt_mod.o mf.o lpevents.o \
+obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \
hvcall.o proc.o htab.o iommu.o misc.o irq.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_VIOPATH) += viopath.o vio.o
obj-$(CONFIG_MODULES) += ksyms.o
-
-quiet_cmd_dt_strings = DT_STR $@
- cmd_dt_strings = $(OBJCOPY) --rename-section .rodata.str1.8=.dt_strings \
- $< $@
-
-$(obj)/dt_mod.o: $(obj)/dt.o
- $(call if_changed,dt_strings)
/*
* These are created by the linker script at the start and end
- * of the section containing all the strings from this file.
+ * of the section containing all the strings marked with the DS macro.
*/
extern char __dt_strings_start[];
extern char __dt_strings_end[];
+#define DS(s) ({ \
+ static const char __s[] __attribute__((section(".dt_strings"))) = s; \
+ __s; \
+})
+
struct iseries_flat_dt {
struct boot_param_header header;
u64 reserve_map[2];
static void * __initdata dt_data;
/*
- * Putting these strings here keeps them out of the section
- * that we rename to .dt_strings using objcopy and capture
- * for the strings blob of the flattened device tree.
+ * Putting these strings here keeps them out of the .dt_strings section
+ * that we capture for the strings blob of the flattened device tree.
*/
static char __initdata device_type_cpu[] = "cpu";
static char __initdata device_type_memory[] = "memory";
#define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE)
-static void __init dt_prop(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop(struct iseries_flat_dt *dt, const char *name,
const void *data, int len)
{
unsigned long offset;
/* The actual data. */
dt_push_bytes(dt, data, len);
}
+#define dt_prop(dt, name, data, len) __dt_prop((dt), DS(name), (data), (len))
-static void __init dt_prop_str(struct iseries_flat_dt *dt, const char *name,
- const char *data)
-{
- dt_prop(dt, name, data, strlen(data) + 1); /* + 1 for NULL */
-}
+#define dt_prop_str(dt, name, data) \
+ dt_prop((dt), name, (data), strlen((data)) + 1); /* + 1 for NULL */
-static void __init dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
+static void __init __dt_prop_u32(struct iseries_flat_dt *dt, const char *name,
u32 data)
{
- dt_prop(dt, name, &data, sizeof(u32));
+ __dt_prop(dt, name, &data, sizeof(u32));
}
+#define dt_prop_u32(dt, name, data) __dt_prop_u32((dt), DS(name), (data))
-static void __init __maybe_unused dt_prop_u64(struct iseries_flat_dt *dt,
- const char *name,
- u64 data)
+static void __init __maybe_unused __dt_prop_u64(struct iseries_flat_dt *dt,
+ const char *name, u64 data)
{
- dt_prop(dt, name, &data, sizeof(u64));
+ __dt_prop(dt, name, &data, sizeof(u64));
}
+#define dt_prop_u64(dt, name, data) __dt_prop_u64((dt), DS(name), (data))
-static void __init dt_prop_u64_list(struct iseries_flat_dt *dt,
- const char *name, u64 *data, int n)
-{
- dt_prop(dt, name, data, sizeof(u64) * n);
-}
+#define dt_prop_u64_list(dt, name, data, n) \
+ dt_prop((dt), name, (data), sizeof(u64) * (n))
-static void __init dt_prop_u32_list(struct iseries_flat_dt *dt,
- const char *name, u32 *data, int n)
-{
- dt_prop(dt, name, data, sizeof(u32) * n);
-}
+#define dt_prop_u32_list(dt, name, data, n) \
+ dt_prop((dt), name, (data), sizeof(u32) * (n))
-#ifdef notyet
-static void __init dt_prop_empty(struct iseries_flat_dt *dt, const char *name)
-{
- dt_prop(dt, name, NULL, 0);
-}
-#endif
+#define dt_prop_empty(dt, name) dt_prop((dt), name, NULL, 0)
static void __init dt_cpus(struct iseries_flat_dt *dt)
{
pdn->iommu_table = iommu_init_table(tbl, -1);
else
kfree(tbl);
- pdev->dev.archdata.dma_data = pdn->iommu_table;
+ set_iommu_table_base(&pdev->dev, pdn->iommu_table);
}
#else
#define pci_dma_dev_setup_iseries NULL
}
#endif
- dev->dev.archdata.dma_data = &iommu_table_iobmap;
+ set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
}
static void pci_dma_bus_setup_null(struct pci_bus *b) { }
/* Make sure IRQ is disabled */
kw_write_reg(reg_ier, 0);
- /* Request chip interrupt */
- if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
+ /* Request chip interrupt. We set IRQF_TIMER because we don't
+ * want that interrupt disabled between the 2 passes of driver
+ * suspend or we'll have issues running the pfuncs
+ */
+ if (request_irq(host->irq, kw_i2c_irq, IRQF_TIMER, "keywest i2c", host))
host->irq = NO_IRQ;
printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
if (ncpus > NR_CPUS)
ncpus = NR_CPUS;
for (i = 1; i < ncpus ; ++i)
- cpu_set(i, cpu_present_map);
+ set_cpu_present(i, true);
if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
int smp_core99_cpu_disable(void)
{
- cpu_clear(smp_processor_id(), cpu_online_map);
+ set_cpu_online(smp_processor_id(), false);
/* XXX reset cpu affinity here */
mpic_cpu_set_priority(0xf);
int cpu;
for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
- cpu_set(cpu, cpu_possible_map);
+ set_cpu_possible(cpu, true);
smp_ops = &psurge_smp_ops;
}
#endif /* CONFIG_PPC32 */
return n_read * sizeof(struct dtl_entry);
}
-static struct file_operations dtl_fops = {
+static const struct file_operations dtl_fops = {
.open = dtl_file_open,
.release = dtl_file_release,
.read = dtl_file_read,
{FW_FEATURE_VIO, "hcall-vio"},
{FW_FEATURE_RDMA, "hcall-rdma"},
{FW_FEATURE_LLAN, "hcall-lLAN"},
- {FW_FEATURE_BULK, "hcall-bulk"},
+ {FW_FEATURE_BULK_REMOVE, "hcall-bulk"},
{FW_FEATURE_XDABR, "hcall-xdabr"},
{FW_FEATURE_MULTITCE, "hcall-multi-tce"},
{FW_FEATURE_SPLPAR, "hcall-splpar"},
- {FW_FEATURE_BULK_REMOVE, "hcall-bulk"},
};
/* Build up the firmware features bitmask using the contents of
{
int cpu = smp_processor_id();
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
vdso_data->processorCount--;
/*fix boot_cpuid here*/
for_each_cpu_mask(cpu, tmp) {
BUG_ON(cpu_isset(cpu, cpu_present_map));
- cpu_set(cpu, cpu_present_map);
+ set_cpu_present(cpu, true);
set_hard_smp_processor_id(cpu, *intserv++);
}
err = 0;
if (get_hard_smp_processor_id(cpu) != intserv[i])
continue;
BUG_ON(cpu_online(cpu));
- cpu_clear(cpu, cpu_present_map);
+ set_cpu_present(cpu, false);
set_hard_smp_processor_id(cpu, -1);
break;
}
phb->node);
iommu_table_setparms(phb, dn, tbl);
PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
- dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+ set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
return;
}
dn = dn->parent;
if (dn && PCI_DN(dn))
- dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+ set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
else
printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
pci_name(dev));
*/
if (dma_window == NULL || pdn->parent == NULL) {
pr_debug(" no dma window for device, linking to parent\n");
- dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table;
+ set_iommu_table_base(&dev->dev, PCI_DN(pdn)->iommu_table);
return;
}
pr_debug(" found DMA window, table: %p\n", pci->iommu_table);
}
- dev->dev.archdata.dma_data = pci->iommu_table;
+ set_iommu_table_base(&dev->dev, pci->iommu_table);
}
#else /* CONFIG_PCI */
#define pci_dma_bus_setup_pSeries NULL
/* Read config space back so we can restore after reset */
read_msi_msg(virq, &msg);
entry->msg = msg;
-
- unmask_msi_irq(virq);
}
return 0;
#include <linux/init.h>
#include <linux/radix-tree.h>
#include <linux/cpu.h>
+#include <linux/msi.h>
#include <linux/of.h>
#include <asm/firmware.h>
static unsigned int xics_startup(unsigned int virq)
{
+ /*
+ * The generic MSI code returns with the interrupt disabled on the
+ * card, using the MSI mask bits. Firmware doesn't appear to unmask
+ * at that level, so we do it here by hand.
+ */
+ if (irq_to_desc(virq)->msi_desc)
+ unmask_msi_irq(virq);
+
/* unmask it */
xics_unmask_irq(virq);
return 0;
--- /dev/null
+#!/usr/bin/perl
+
+# Copyright © 2009 IBM Corporation
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+
+# This script checks the relcoations of a vmlinux for "suspicious"
+# relocations.
+
+use strict;
+use warnings;
+
+if ($#ARGV != 1) {
+ die "$0 [path to objdump] [path to vmlinux]\n";
+}
+
+# Have Kbuild supply the path to objdump so we handle cross compilation.
+my $objdump = shift;
+my $vmlinux = shift;
+my $bad_relocs_count = 0;
+my $bad_relocs = "";
+my $old_binutils = 0;
+
+open(FD, "$objdump -R $vmlinux|") or die;
+while (<FD>) {
+ study $_;
+
+ # Only look at relcoation lines.
+ next if (!/\s+R_/);
+
+ # These relocations are okay
+ next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or
+ /R_PPC64_ADDR64\s+mach_/);
+
+ # If we see this type of relcoation it's an idication that
+ # we /may/ be using an old version of binutils.
+ if (/R_PPC64_UADDR64/) {
+ $old_binutils++;
+ }
+
+ $bad_relocs_count++;
+ $bad_relocs .= $_;
+}
+
+if ($bad_relocs_count) {
+ print "WARNING: $bad_relocs_count bad relocations\n";
+ print $bad_relocs;
+}
+
+if ($old_binutils) {
+ print "WARNING: You need at binutils >= 2.19 to build a ".
+ "CONFIG_RELCOATABLE kernel\n";
+}
/* We only have one iommu table on the mac for now, which makes
* things simple. Setup all PCI devices to point to this table
*/
- dev->dev.archdata.dma_data = &iommu_table_dart;
+ set_iommu_table_base(&dev->dev, &iommu_table_dart);
}
static void pci_dma_bus_setup_dart(struct pci_bus *bus)
}
#endif
+static inline int unrecoverable_excp(struct pt_regs *regs)
+{
+#ifdef CONFIG_4xx
+ /* We have no MSR_RI bit on 4xx, so we simply return false */
+ return 0;
+#else
+ return ((regs->msr & MSR_RI) == 0);
+#endif
+}
+
static int xmon_core(struct pt_regs *regs, int fromipi)
{
int cmd = 0;
bp = NULL;
if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF))
bp = at_breakpoint(regs->nip);
- if (bp || (regs->msr & MSR_RI) == 0)
+ if (bp || unrecoverable_excp(regs))
fromipi = 0;
if (!fromipi) {
cpu, BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
- if ((regs->msr & MSR_RI) == 0)
+ if (unrecoverable_excp(regs))
printf("WARNING: exception is not recoverable, "
"can't continue\n");
release_output_lock();
printf("Stopped at breakpoint %x (", BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
- if ((regs->msr & MSR_RI) == 0)
+ if (unrecoverable_excp(regs))
printf("WARNING: exception is not recoverable, "
"can't continue\n");
remove_bpts();
in_xmon = 0;
#endif
+#ifdef CONFIG_BOOKE
+ if (regs->msr & MSR_DE) {
+ bp = at_breakpoint(regs->nip);
+ if (bp != NULL) {
+ regs->nip = (unsigned long) &bp->instr[0];
+ atomic_inc(&bp->ref_count);
+ }
+ }
+#else
if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF)) {
bp = at_breakpoint(regs->nip);
if (bp != NULL) {
}
}
}
-
+#endif
insert_cpu_bpts();
local_irq_restore(flags);
}
}
+#ifdef CONFIG_BOOKE
+static int do_step(struct pt_regs *regs)
+{
+ regs->msr |= MSR_DE;
+ mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
+ return 1;
+}
+#else
/*
* Step a single instruction.
* Some instructions we emulate, others we execute with MSR_SE set.
regs->msr |= MSR_SE;
return 1;
}
+#endif
static void bootcmds(void)
{
* /proc entries (sysctl)
*/
static const char appldata_proc_name[APPLDATA_PROC_NAME_LENGTH] = "appldata";
-static int appldata_timer_handler(ctl_table *ctl, int write, struct file *filp,
+static int appldata_timer_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
static int appldata_interval_handler(ctl_table *ctl, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos);
* Start/Stop timer, show status of timer (0 = not active, 1 = active)
*/
static int
-appldata_timer_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_timer_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int len;
* current timer interval.
*/
static int
-appldata_interval_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_interval_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int len, interval;
* monitoring (0 = not in process, 1 = in process)
*/
static int
-appldata_generic_handler(ctl_table *ctl, int write, struct file *filp,
+appldata_generic_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct appldata_ops *ops = NULL, *tmp_ops;
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install - same as make zlilo
}
if (diag204((unsigned long)SUBC_STIB6 |
(unsigned long)INFO_EXT, pages, buf) >= 0) {
- diag204_store_sc = SUBC_STIB7;
+ diag204_store_sc = SUBC_STIB6;
diag204_info_type = INFO_EXT;
goto out;
}
static inline unsigned int
cputime_to_msecs(const cputime_t cputime)
{
- return __div(cputime, 4096000);
+ return cputime_div(cputime, 4096000);
}
static inline cputime_t
static inline clock_t
cputime_to_clock_t(cputime_t cputime)
{
- return __div(cputime, 4096000000ULL / USER_HZ);
+ return cputime_div(cputime, 4096000000ULL / USER_HZ);
}
static inline cputime_t
static inline clock_t
cputime64_to_clock_t(cputime64_t cputime)
{
- return __div(cputime, 4096000000ULL / USER_HZ);
+ return cputime_div(cputime, 4096000000ULL / USER_HZ);
}
struct s390_idle_data {
#ifndef _S390_DELAY_H
#define _S390_DELAY_H
-extern void __udelay(unsigned long usecs);
-extern void udelay_simple(unsigned long usecs);
+extern void __udelay(unsigned long long usecs);
+extern void udelay_simple(unsigned long long usecs);
extern void __delay(unsigned long loops);
-#define udelay(n) __udelay(n)
+#define udelay(n) __udelay((unsigned long long) (n))
+#define mdelay(n) __udelay((unsigned long long) (n) * 1000)
#endif /* defined(_S390_DELAY_H) */
/* Keep this the last entry. */
#define R_390_NUM 61
+/* Bits present in AT_HWCAP. */
+#define HWCAP_S390_ESAN3 1
+#define HWCAP_S390_ZARCH 2
+#define HWCAP_S390_STFLE 4
+#define HWCAP_S390_MSA 8
+#define HWCAP_S390_LDISP 16
+#define HWCAP_S390_EIMM 32
+#define HWCAP_S390_DFP 64
+#define HWCAP_S390_HPAGE 128
+#define HWCAP_S390_ETF3EH 256
+#define HWCAP_S390_HIGH_GPRS 512
+
/*
* These are used to set parameters in the core dumps.
*/
__u32 orig_gpr2;
} s390_compat_regs;
+typedef struct
+{
+ __u32 gprs_high[NUM_GPRS];
+} s390_compat_regs_high;
#ifdef __KERNEL__
extern int smp_cpu_polarization[];
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#endif
extern cpumask_t cpu_core_map[NR_CPUS];
-#define topology_core_siblings(cpu) (cpu_core_map[cpu])
#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
int topology_set_cpu_management(int fc);
#ifndef _ASM_S390_UCONTEXT_H
#define _ASM_S390_UCONTEXT_H
+#define UC_EXTENDED 0x00000001
+
+#ifndef __s390x__
+
+struct ucontext_extended {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ _sigregs uc_mcontext;
+ unsigned long uc_sigmask[2];
+ unsigned long uc_gprs_high[16];
+};
+
+#endif
+
struct ucontext {
unsigned long uc_flags;
struct ucontext *uc_link;
#include <linux/signal.h>
#include <linux/resource.h>
#include <linux/times.h>
-#include <linux/utsname.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/sem.h>
struct sigcontext32 sc;
_sigregs32 sregs;
int signo;
+ __u32 gprs_high[NUM_GPRS];
__u8 retcode[S390_SYSCALL_SIZE];
} sigframe32;
__u8 retcode[S390_SYSCALL_SIZE];
compat_siginfo_t info;
struct ucontext32 uc;
+ __u32 gprs_high[NUM_GPRS];
} rt_sigframe32;
int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
return 0;
}
+static int save_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
+{
+ __u32 gprs_high[NUM_GPRS];
+ int i;
+
+ for (i = 0; i < NUM_GPRS; i++)
+ gprs_high[i] = regs->gprs[i] >> 32;
+
+ return __copy_to_user(uregs, &gprs_high, sizeof(gprs_high));
+}
+
+static int restore_sigregs_gprs_high(struct pt_regs *regs, __u32 __user *uregs)
+{
+ __u32 gprs_high[NUM_GPRS];
+ int err, i;
+
+ err = __copy_from_user(&gprs_high, uregs, sizeof(gprs_high));
+ if (err)
+ return err;
+ for (i = 0; i < NUM_GPRS; i++)
+ *(__u32 *)®s->gprs[i] = gprs_high[i];
+ return 0;
+}
+
asmlinkage long sys32_sigreturn(void)
{
struct pt_regs *regs = task_pt_regs(current);
if (restore_sigregs32(regs, &frame->sregs))
goto badframe;
+ if (restore_sigregs_gprs_high(regs, frame->gprs_high))
+ goto badframe;
return regs->gprs[2];
if (restore_sigregs32(regs, &frame->uc.uc_mcontext))
goto badframe;
+ if (restore_sigregs_gprs_high(regs, frame->gprs_high))
+ goto badframe;
err = __get_user(ss_sp, &frame->uc.uc_stack.ss_sp);
st.ss_sp = compat_ptr(ss_sp);
if (save_sigregs32(regs, &frame->sregs))
goto give_sigsegv;
+ if (save_sigregs_gprs_high(regs, frame->gprs_high))
+ goto give_sigsegv;
if (__put_user((unsigned long) &frame->sregs, &frame->sc.sregs))
goto give_sigsegv;
goto give_sigsegv;
/* Create the ucontext. */
- err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(UC_EXTENDED, &frame->uc.uc_flags);
err |= __put_user(0, &frame->uc.uc_link);
err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->gprs[15]),
&frame->uc.uc_stack.ss_flags);
err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size);
err |= save_sigregs32(regs, &frame->uc.uc_mcontext);
+ err |= save_sigregs_gprs_high(regs, frame->gprs_high);
err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
if (err)
goto give_sigsegv;
.globl sys32_truncate_wrapper
sys32_truncate_wrapper:
llgtr %r2,%r2 # const char *
- llgfr %r3,%r3 # unsigned long
+ lgfr %r3,%r3 # long
jg sys_truncate # branch to system call
.globl sys32_ftruncate_wrapper
* if debug_active is already off
*/
static int
-s390dbf_procactive(ctl_table *table, int write, struct file *filp,
+s390dbf_procactive(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
if (!write || debug_stoppable || !debug_active)
- return proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec(table, write, buffer, lenp, ppos);
else
return 0;
}
{
struct ftrace_graph_ent trace;
- /* Nmi's are currently unsupported. */
- if (unlikely(in_nmi()))
- goto out;
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
goto out;
if (ftrace_push_return_trace(parent, ip, &trace.depth, 0) == -EBUSY)
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
{
if (strcmp(trigger->name, ON_PANIC_STR) == 0)
disabled_wait((unsigned long) __builtin_return_address(0));
- else {
- signal_processor(smp_processor_id(), sigp_stop);
- for (;;);
- }
+ while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy)
+ cpu_relax();
+ for (;;);
}
static struct shutdown_action stop_action = {SHUTDOWN_ACTION_STOP_STR,
/* Free memory returned from module_alloc */
void module_free(struct module *mod, void *module_region)
{
+ vfree(mod->arch.syminfo);
+ mod->arch.syminfo = NULL;
vfree(module_region);
}
struct module *me)
{
vfree(me->arch.syminfo);
+ me->arch.syminfo = NULL;
return module_bug_finalize(hdr, sechdrs, me);
}
#include <linux/init.h>
#include <linux/module.h>
#include <linux/notifier.h>
-#include <linux/utsname.h>
#include <linux/tick.h>
#include <linux/elfcore.h>
#include <linux/kernel_stat.h>
static int show_cpuinfo(struct seq_file *m, void *v)
{
- static const char *hwcap_str[9] = {
+ static const char *hwcap_str[10] = {
"esan3", "zarch", "stfle", "msa", "ldisp", "eimm", "dfp",
- "edat", "etf3eh"
+ "edat", "etf3eh", "highgprs"
};
struct _lowcore *lc;
unsigned long n = (unsigned long) v - 1;
num_online_cpus(), loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ))%100);
seq_puts(m, "features\t: ");
- for (i = 0; i < 9; i++)
+ for (i = 0; i < 10; i++)
if (hwcap_str[i] && (elf_hwcap & (1UL << i)))
seq_printf(m, "%s ", hwcap_str[i]);
seq_puts(m, "\n");
enum s390_regset {
REGSET_GENERAL,
REGSET_FP,
+ REGSET_GENERAL_EXTENDED,
};
static void
return rc;
}
+static int s390_compat_regs_high_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ compat_ulong_t *gprs_high;
+
+ gprs_high = (compat_ulong_t *)
+ &task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)];
+ if (kbuf) {
+ compat_ulong_t *k = kbuf;
+ while (count > 0) {
+ *k++ = *gprs_high;
+ gprs_high += 2;
+ count -= sizeof(*k);
+ }
+ } else {
+ compat_ulong_t __user *u = ubuf;
+ while (count > 0) {
+ if (__put_user(*gprs_high, u++))
+ return -EFAULT;
+ gprs_high += 2;
+ count -= sizeof(*u);
+ }
+ }
+ return 0;
+}
+
+static int s390_compat_regs_high_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ compat_ulong_t *gprs_high;
+ int rc = 0;
+
+ gprs_high = (compat_ulong_t *)
+ &task_pt_regs(target)->gprs[pos / sizeof(compat_ulong_t)];
+ if (kbuf) {
+ const compat_ulong_t *k = kbuf;
+ while (count > 0) {
+ *gprs_high = *k++;
+ *gprs_high += 2;
+ count -= sizeof(*k);
+ }
+ } else {
+ const compat_ulong_t __user *u = ubuf;
+ while (count > 0 && !rc) {
+ unsigned long word;
+ rc = __get_user(word, u++);
+ if (rc)
+ break;
+ *gprs_high = word;
+ *gprs_high += 2;
+ count -= sizeof(*u);
+ }
+ }
+
+ return rc;
+}
+
static const struct user_regset s390_compat_regsets[] = {
[REGSET_GENERAL] = {
.core_note_type = NT_PRSTATUS,
.get = s390_fpregs_get,
.set = s390_fpregs_set,
},
+ [REGSET_GENERAL_EXTENDED] = {
+ .core_note_type = NT_PRXSTATUS,
+ .n = sizeof(s390_compat_regs_high) / sizeof(compat_long_t),
+ .size = sizeof(compat_long_t),
+ .align = sizeof(compat_long_t),
+ .get = s390_compat_regs_high_get,
+ .set = s390_compat_regs_high_set,
+ },
};
static const struct user_regset_view user_s390_compat_view = {
if ((facility_list & (1UL << (31 - 22)))
&& (facility_list & (1UL << (31 - 30))))
- elf_hwcap |= 1UL << 8;
+ elf_hwcap |= HWCAP_S390_ETF3EH;
/*
* Check for additional facilities with store-facility-list-extended.
__stfle(&facility_list_extended, 1) > 0) {
if ((facility_list_extended & (1ULL << (63 - 42)))
&& (facility_list_extended & (1ULL << (63 - 44))))
- elf_hwcap |= 1UL << 6;
+ elf_hwcap |= HWCAP_S390_DFP;
}
+ /*
+ * Huge page support HWCAP_S390_HPAGE is bit 7.
+ */
if (MACHINE_HAS_HPAGE)
- elf_hwcap |= 1UL << 7;
+ elf_hwcap |= HWCAP_S390_HPAGE;
+
+ /*
+ * 64-bit register support for 31-bit processes
+ * HWCAP_S390_HIGH_GPRS is bit 9.
+ */
+ elf_hwcap |= HWCAP_S390_HIGH_GPRS;
switch (S390_lowcore.cpu_id.machine) {
case 0x9672:
__u32 status;
switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) {
- case sigp_order_code_accepted:
case sigp_status_stored:
/* Check for stopped and check stop state */
if (status & 0x50)
udelay(10);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
int cpu;
- for_each_cpu_mask(cpu, mask)
+ for_each_cpu(cpu, mask)
smp_ext_bitcall(cpu, ec_call_function);
}
/* Wait until target cpu is down */
while (!cpu_stopped(cpu))
cpu_relax();
+ while (signal_processor_p(0, cpu, sigp_set_prefix) == sigp_busy)
+ udelay(10);
smp_free_lowcore(cpu);
pr_info("Processor %d stopped\n", cpu);
}
void cpu_die(void)
{
idle_task_exit();
- signal_processor(smp_processor_id(), sigp_stop);
- BUG();
+ while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy)
+ cpu_relax();
for (;;);
}
lghi %r1,0x1000
/* Save CPU address */
- stap __LC_CPU_ADDRESS(%r1)
+ stap __LC_CPU_ADDRESS(%r0)
/* Store registers */
mvc 0x318(4,%r1),__SF_EMPTY(%r15) /* move prefix to lowcore */
stmg %r0,%r15,0x280(%r1) /* store general registers */
stpt 0x328(%r1) /* store timer */
+ stck __SF_EMPTY(%r15) /* store clock */
stckc 0x330(%r1) /* store clock comparator */
+ /* Update cputime accounting before going to sleep */
+ lg %r0,__LC_LAST_UPDATE_TIMER
+ slg %r0,0x328(%r1)
+ alg %r0,__LC_SYSTEM_TIMER
+ stg %r0,__LC_SYSTEM_TIMER
+ mvc __LC_LAST_UPDATE_TIMER(8),0x328(%r1)
+ lg %r0,__LC_LAST_UPDATE_CLOCK
+ slg %r0,__SF_EMPTY(%r15)
+ alg %r0,__LC_STEAL_TIMER
+ stg %r0,__LC_STEAL_TIMER
+ mvc __LC_LAST_UPDATE_CLOCK(8),__SF_EMPTY(%r15)
+
/* Activate DAT */
stosm __SF_EMPTY(%r15),0x04
larl %r1,.Lresume_cpu /* Resume CPU address: r2 */
stap 0(%r1)
llgh %r2,0(%r1)
- lghi %r3,0x1000
- llgh %r1,__LC_CPU_ADDRESS(%r3) /* Suspend CPU address: r1 */
+ llgh %r1,__LC_CPU_ADDRESS(%r0) /* Suspend CPU address: r1 */
cgr %r1,%r2
je restore_registers /* r1 = r2 -> nothing to do */
larl %r4,.Lrestart_suspend_psw /* Set new restart PSW */
brc 2,4b /* busy, try again */
5:
sigp %r9,%r2,__SIGP_STOP /* stop resume (current) CPU */
+ brc 2,5b /* busy, try again */
6: j 6b
restart_suspend:
llgh %r2,0(%r1)
7:
sigp %r9,%r2,__SIGP_SENSE /* Wait for resume CPU */
+ brc 8,7b /* accepted, status 0, still running */
brc 2,7b /* busy, try again */
tmll %r9,0x40 /* Test if resume CPU is stopped */
jz 7b
restore_registers:
/* Restore registers */
- lghi %r13,0x1000 /* %r1 = pointer to save arae */
+ lghi %r13,0x1000 /* %r1 = pointer to save area */
+ /* Ignore time spent in suspended state. */
+ llgf %r1,0x318(%r13)
+ stck __LC_LAST_UPDATE_CLOCK(%r1)
spt 0x328(%r13) /* reprogram timer */
//sckc 0x330(%r13) /* set clock comparator */
/* Load old stack */
lg %r15,0x2f8(%r13)
- /* Pointer to save area */
- lghi %r13,0x1000
-
/* Restore prefix register */
spx 0x318(%r13)
static union {
struct vdso_data data;
u8 page[PAGE_SIZE];
-} vdso_data_store __attribute__((__section__(".data.page_aligned")));
+} vdso_data_store __page_aligned_data;
struct vdso_data *vdso_data = &vdso_data_store.data;
/*
goto out_up;
}
+ /*
+ * Put vDSO base into mm struct. We need to do this before calling
+ * install_special_mapping or the perf counter mmap tracking code
+ * will fail to recognise it as a vDSO (since arch_vma_name fails).
+ */
+ current->mm->context.vdso_base = vdso_base;
+
/*
* our vma flags don't have VM_WRITE so by default, the process
* isn't allowed to write those pages.
VM_ALWAYSDUMP,
vdso_pagelist);
if (rc)
- goto out_up;
-
- /* Put vDSO base into mm struct */
- current->mm->context.vdso_base = vdso_base;
-
- up_write(&mm->mmap_sem);
- return 0;
-
+ current->mm->context.vdso_base = 0;
out_up:
up_write(&mm->mmap_sem);
return rc;
KBUILD_CFLAGS_31 := $(filter-out -m64,$(KBUILD_CFLAGS))
KBUILD_CFLAGS_31 += -m31 -fPIC -shared -fno-common -fno-builtin
KBUILD_CFLAGS_31 += -nostdlib -Wl,-soname=linux-vdso32.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
$(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_31)
$(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_31)
#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/page.h>
- .section ".data.page_aligned"
+ __PAGE_ALIGNED_DATA
.globl vdso32_start, vdso32_end
.balign PAGE_SIZE
KBUILD_CFLAGS_64 := $(filter-out -m64,$(KBUILD_CFLAGS))
KBUILD_CFLAGS_64 += -m64 -fPIC -shared -fno-common -fno-builtin
KBUILD_CFLAGS_64 += -nostdlib -Wl,-soname=linux-vdso64.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
$(targets:%=$(obj)/%.dbg): KBUILD_CFLAGS = $(KBUILD_CFLAGS_64)
$(targets:%=$(obj)/%.dbg): KBUILD_AFLAGS = $(KBUILD_AFLAGS_64)
#include <linux/init.h>
+#include <linux/linkage.h>
#include <asm/page.h>
- .section ".data.page_aligned"
+ __PAGE_ALIGNED_DATA
.globl vdso64_start, vdso64_end
.balign PAGE_SIZE
. = ALIGN(PAGE_SIZE);
_eshared = .; /* End of shareable data */
+ _sdata = .; /* Start of data section */
EXCEPTION_TABLE(16) :data
int kvm_s390_inject_program_int(struct kvm_vcpu *vcpu, u16 code);
int kvm_s390_inject_sigp_stop(struct kvm_vcpu *vcpu, int action);
-static inline int kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
+static inline long kvm_s390_vcpu_get_memsize(struct kvm_vcpu *vcpu)
{
return vcpu->arch.sie_block->gmslm
- vcpu->arch.sie_block->gmsor
asm volatile("0: brct %0,0b" : : "d" ((loops/2) + 1));
}
-static void __udelay_disabled(unsigned long usecs)
+static void __udelay_disabled(unsigned long long usecs)
{
unsigned long mask, cr0, cr0_saved;
u64 clock_saved;
clock_saved = local_tick_disable();
- set_clock_comparator(get_clock() + ((u64) usecs << 12));
+ set_clock_comparator(get_clock() + (usecs << 12));
__ctl_store(cr0_saved, 0, 0);
cr0 = (cr0_saved & 0xffff00e0) | 0x00000800;
__ctl_load(cr0 , 0, 0);
set_clock_comparator(S390_lowcore.clock_comparator);
}
-static void __udelay_enabled(unsigned long usecs)
+static void __udelay_enabled(unsigned long long usecs)
{
unsigned long mask;
- u64 end, time;
+ u64 clock_saved;
+ u64 end;
mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT | PSW_MASK_IO;
- end = get_clock() + ((u64) usecs << 12);
+ end = get_clock() + (usecs << 12);
do {
- time = end < S390_lowcore.clock_comparator ?
- end : S390_lowcore.clock_comparator;
- set_clock_comparator(time);
+ clock_saved = 0;
+ if (end < S390_lowcore.clock_comparator) {
+ clock_saved = local_tick_disable();
+ set_clock_comparator(end);
+ }
trace_hardirqs_on();
__load_psw_mask(mask);
local_irq_disable();
+ if (clock_saved)
+ local_tick_enable(clock_saved);
} while (get_clock() < end);
set_clock_comparator(S390_lowcore.clock_comparator);
}
/*
* Waits for 'usecs' microseconds using the TOD clock comparator.
*/
-void __udelay(unsigned long usecs)
+void __udelay(unsigned long long usecs)
{
unsigned long flags;
* Simple udelay variant. To be used on startup and reboot
* when the interrupt handler isn't working.
*/
-void udelay_simple(unsigned long usecs)
+void udelay_simple(unsigned long long usecs)
{
u64 end;
- end = get_clock() + ((u64) usecs << 12);
+ end = get_clock() + (usecs << 12);
while (get_clock() < end)
cpu_relax();
}
tmp1 = -4096UL;
asm volatile(
"0: .insn ss,0xc80000000000,0(%0,%2),0(%1),0\n"
- " jz 7f\n"
+ "9: jz 7f\n"
"1:"ALR" %0,%3\n"
" "SLR" %1,%3\n"
" "SLR" %2,%3\n"
" "CLR" %0,%4\n" /* copy crosses next page boundary? */
" jnh 4f\n"
"3: .insn ss,0xc80000000000,0(%4,%2),0(%1),0\n"
- " "SLR" %0,%4\n"
+ "10:"SLR" %0,%4\n"
" "ALR" %2,%4\n"
"4:"LHI" %4,-1\n"
" "ALR" %4,%0\n" /* copy remaining size, subtract 1 */
" j 8f\n"
"7:"SLR" %0,%0\n"
"8: \n"
- EX_TABLE(0b,2b) EX_TABLE(3b,4b)
+ EX_TABLE(0b,2b) EX_TABLE(3b,4b) EX_TABLE(9b,2b) EX_TABLE(10b,4b)
: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
: "d" (reg0) : "cc", "memory");
return size;
tmp1 = -4096UL;
asm volatile(
"0: .insn ss,0xc80000000000,0(%0,%1),0(%2),0\n"
- " jz 4f\n"
+ "6: jz 4f\n"
"1:"ALR" %0,%3\n"
" "SLR" %1,%3\n"
" "SLR" %2,%3\n"
" "CLR" %0,%4\n" /* copy crosses next page boundary? */
" jnh 5f\n"
"3: .insn ss,0xc80000000000,0(%4,%1),0(%2),0\n"
- " "SLR" %0,%4\n"
+ "7:"SLR" %0,%4\n"
" j 5f\n"
"4:"SLR" %0,%0\n"
"5: \n"
- EX_TABLE(0b,2b) EX_TABLE(3b,5b)
+ EX_TABLE(0b,2b) EX_TABLE(3b,5b) EX_TABLE(6b,2b) EX_TABLE(7b,5b)
: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
: "d" (reg0) : "cc", "memory");
return size;
tmp1 = -256UL;
asm volatile(
"0: mvcp 0(%0,%2),0(%1),%3\n"
- " jz 8f\n"
+ "10:jz 8f\n"
"1:"ALR" %0,%3\n"
" la %1,256(%1)\n"
" la %2,256(%2)\n"
"2: mvcp 0(%0,%2),0(%1),%3\n"
- " jnz 1b\n"
+ "11:jnz 1b\n"
" j 8f\n"
"3: la %4,255(%1)\n" /* %4 = ptr + 255 */
" "LHI" %3,-4096\n"
" "CLR" %0,%4\n" /* copy crosses next page boundary? */
" jnh 5f\n"
"4: mvcp 0(%4,%2),0(%1),%3\n"
- " "SLR" %0,%4\n"
+ "12:"SLR" %0,%4\n"
" "ALR" %2,%4\n"
"5:"LHI" %4,-1\n"
" "ALR" %4,%0\n" /* copy remaining size, subtract 1 */
"8:"SLR" %0,%0\n"
"9: \n"
EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,5b)
+ EX_TABLE(10b,3b) EX_TABLE(11b,3b) EX_TABLE(12b,5b)
: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
: : "cc", "memory");
return size;
tmp1 = -256UL;
asm volatile(
"0: mvcs 0(%0,%1),0(%2),%3\n"
- " jz 5f\n"
+ "7: jz 5f\n"
"1:"ALR" %0,%3\n"
" la %1,256(%1)\n"
" la %2,256(%2)\n"
"2: mvcs 0(%0,%1),0(%2),%3\n"
- " jnz 1b\n"
+ "8: jnz 1b\n"
" j 5f\n"
"3: la %4,255(%1)\n" /* %4 = ptr + 255 */
" "LHI" %3,-4096\n"
" "CLR" %0,%4\n" /* copy crosses next page boundary? */
" jnh 6f\n"
"4: mvcs 0(%4,%1),0(%2),%3\n"
- " "SLR" %0,%4\n"
+ "9:"SLR" %0,%4\n"
" j 6f\n"
"5:"SLR" %0,%0\n"
"6: \n"
EX_TABLE(0b,3b) EX_TABLE(2b,3b) EX_TABLE(4b,6b)
+ EX_TABLE(7b,3b) EX_TABLE(8b,3b) EX_TABLE(9b,6b)
: "+a" (size), "+a" (ptr), "+a" (x), "+a" (tmp1), "=a" (tmp2)
: : "cc", "memory");
return size;
static struct ctl_table cmm_table[];
static int
-cmm_pages_handler(ctl_table *ctl, int write, struct file *filp,
+cmm_pages_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char buf[16], *p;
}
static int
-cmm_timeout_handler(ctl_table *ctl, int write, struct file *filp,
+cmm_timeout_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char buf[64], *p;
/* lets check if we are allowed to replace the mm */
task_lock(tsk);
if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
- tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) {
+#ifdef CONFIG_AIO
+ !hlist_empty(&tsk->mm->ioctx_list) ||
+#endif
+ tsk->mm != tsk->active_mm) {
task_unlock(tsk);
return -EINVAL;
}
/* Now lets check again if something happened */
task_lock(tsk);
if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
- tsk->mm != tsk->active_mm || !hlist_empty(&tsk->mm->ioctx_list)) {
+#ifdef CONFIG_AIO
+ !hlist_empty(&tsk->mm->ioctx_list) ||
+#endif
+ tsk->mm != tsk->active_mm) {
mmput(mm);
task_unlock(tsk);
return -EINVAL;
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"), __aligned__(THREAD_SIZE))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_DYNAMIC_FTRACE
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
- select HAVE_FTRACE_SYSCALLS
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_ARCH_KGDB
select ARCH_HIBERNATION_POSSIBLE if MMU
bool
select ARCH_SUSPEND_POSSIBLE
+config SYS_SUPPORTS_HUGETLBFS
+ bool
+
config SYS_SUPPORTS_SMP
bool
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SH4A
bool
bool
select CPU_HAS_FPU
select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SHX2
bool
libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y)
libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y)
-BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec \
+BOOT_TARGETS = uImage uImage.bz2 uImage.gz uImage.lzma uImage.srec uImage.bin \
zImage vmlinux.srec romImage
PHONY += maketools $(BOOT_TARGETS) FORCE
@echo ' vmlinux.srec - Create an ELF S-record'
@echo '* uImage - Alias to bootable U-Boot image'
@echo ' uImage.srec - Create an S-record for U-Boot'
+ @echo ' uImage.bin - Kernel-only image for U-Boot (bin)'
@echo '* uImage.gz - Kernel-only image for U-Boot (gzip)'
@echo ' uImage.bz2 - Kernel-only image for U-Boot (bzip2)'
@echo ' uImage.lzma - Kernel-only image for U-Boot (lzma)'
static void __init mpr2_setup(char **cmdline_p)
{
- __set_io_port_base(0xa0000000);
-
/* set Pin Select Register A:
* /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
* /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
/* Acknowledge any previous events */
/* XXX */
- __set_io_port_base(0xa0000000);
-
/* Assign all virtual IRQs to the System ASIC int. handler */
for (i = HW_EVENT_IRQ_BASE; i < HW_EVENT_IRQ_MAX; i++)
set_irq_chip_and_handler(i, &systemasic_int,
#include <linux/delay.h>
#include <linux/usb/r8a66597.h>
#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
#include <linux/input.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
* 0x1800_0000 MFI 16bit
*/
+/* SWITCH
+ *------------------------------
+ * DS2[1] = FlashROM write protect ON : write protect
+ * OFF : No write protect
+ * DS2[2] = RMII / TS, SCIF ON : RMII
+ * OFF : TS, SCIF3
+ * DS2[3] = Camera / Video ON : Camera
+ * OFF : NTSC/PAL (IN)
+ * DS2[5] = NTSC_OUT Clock ON : On board OSC
+ * OFF : SH7724 DV_CLK
+ * DS2[6-7] = MMC / SD ON-OFF : SD
+ * OFF-ON : MMC
+ */
+
/* Heartbeat */
static unsigned char led_pos[] = { 0, 1, 2, 3 };
static struct heartbeat_data heartbeat_data = {
.name = "boot loader",
.offset = 0,
.size = (5 * 1024 * 1024),
- .mask_flags = MTD_CAP_ROM,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "free-area",
.offset = MTDPART_OFS_APPEND,
struct sh_eth_plat_data sh_eth_plat = {
.phy = 0x1f, /* SMSC LAN8700 */
.edmac_endian = EDMAC_LITTLE_ENDIAN,
+ .ether_link_active_low = 1
};
static struct platform_device sh_eth_device = {
},
};
+/* TouchScreen */
+#define IRQ0 32
+static int ts_get_pendown_state(void)
+{
+ int val = 0;
+ gpio_free(GPIO_FN_INTC_IRQ0);
+ gpio_request(GPIO_PTZ0, NULL);
+ gpio_direction_input(GPIO_PTZ0);
+
+ val = gpio_get_value(GPIO_PTZ0);
+
+ gpio_free(GPIO_PTZ0);
+ gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+
+ return val ? 0 : 1;
+}
+
+static int ts_init(void)
+{
+ gpio_request(GPIO_FN_INTC_IRQ0, NULL);
+ return 0;
+}
+
+struct tsc2007_platform_data tsc2007_info = {
+ .model = 2007,
+ .x_plate_ohms = 180,
+ .get_pendown_state = ts_get_pendown_state,
+ .init_platform_hw = ts_init,
+};
+
+static struct i2c_board_info ts_i2c_clients = {
+ I2C_BOARD_INFO("tsc2007", 0x48),
+ .type = "tsc2007",
+ .platform_data = &tsc2007_info,
+ .irq = IRQ0,
+};
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
#define IODRIVEA 0xA405018A
static int __init arch_setup(void)
{
+ /* enable STATUS0, STATUS2 and PDSTATUS */
+ gpio_request(GPIO_FN_STATUS0, NULL);
+ gpio_request(GPIO_FN_STATUS2, NULL);
+ gpio_request(GPIO_FN_PDSTATUS, NULL);
+
/* enable SCIFA0 */
gpio_request(GPIO_FN_SCIF0_TXD, NULL);
gpio_request(GPIO_FN_SCIF0_RXD, NULL);
*/
gpio_request(GPIO_PTF4, NULL);
gpio_direction_output(GPIO_PTF4, 1);
+
+ /* enable TouchScreen */
+ i2c_register_board_info(0, &ts_i2c_clients, 1);
+ set_irq_type(IRQ0, IRQ_TYPE_LEVEL_LOW);
}
/* enable CEU0 */
*/
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/smp_lock.h>
#include <linux/kdev_t.h>
#include <linux/cdev.h>
#include <linux/fs.h>
int minor;
int ret = -ENOENT;
- lock_kernel();
+ preempt_disable();
minor = MINOR(inode->i_rdev);
if (minor < DEVCOUNT) {
if (openCnt > 0) {
ret = 0;
}
}
- unlock_kernel();
+ preempt_enable();
return ret;
}
return 0;
}
-static int gio_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
+static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
unsigned int data;
static unsigned int addr = 0;
.owner = THIS_MODULE,
.open = gio_open, /* open */
.release = gio_close, /* release */
- .ioctl = gio_ioctl, /* ioctl */
+ .unlocked_ioctl = gio_ioctl,
};
static int __init gio_init(void)
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#ifdef CONFIG_MTD
#include <linux/mtd/map.h>
+#endif
#include <asm/machvec.h>
#include <asm/io.h>
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
static struct mtd_partition rsk_partitions[] = {
{
.name = "Bootloader",
};
static struct physmap_flash_data flash_data = {
+ .parts = rsk_partitions,
+ .nr_parts = ARRAY_SIZE(rsk_partitions),
.width = 2,
};
},
};
-static struct mtd_info *flash_mtd;
+#ifdef CONFIG_MTD
+static const char *probes[] = { "cmdlinepart", NULL };
static struct map_info rsk_flash_map = {
.name = "RSK+ Flash",
.bankwidth = 2,
};
+static struct mtd_info *flash_mtd;
+
+static struct mtd_partition *parsed_partitions;
+
static void __init set_mtd_partitions(void)
{
int nr_parts = 0;
nr_parts = parse_mtd_partitions(flash_mtd, probes,
&parsed_partitions, 0);
/* If there is no partition table, used the hard coded table */
- if (nr_parts <= 0) {
- flash_data.parts = rsk_partitions;
- flash_data.nr_parts = ARRAY_SIZE(rsk_partitions);
- } else {
+ if (nr_parts > 0) {
flash_data.nr_parts = nr_parts;
flash_data.parts = parsed_partitions;
}
}
+#else
+static inline void set_mtd_partitions(void) {}
+#endif
static struct platform_device *rsk_devices[] __initdata = {
&flash_device,
#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
+#include <sound/sh_fsi.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
},
};
+/* FSI */
+/*
+ * FSI-A use external clock which came from ak464x.
+ * So, we should change parent of fsi
+ */
+#define FCLKACR 0xa4150008
+static void fsimck_init(struct clk *clk)
+{
+ u32 status = ctrl_inl(clk->enable_reg);
+
+ /* use external clock */
+ status &= ~0x000000ff;
+ status |= 0x00000080;
+ ctrl_outl(status, clk->enable_reg);
+}
+
+static struct clk_ops fsimck_clk_ops = {
+ .init = fsimck_init,
+};
+
+static struct clk fsimcka_clk = {
+ .name = "fsimcka_clk",
+ .id = -1,
+ .ops = &fsimck_clk_ops,
+ .enable_reg = (void __iomem *)FCLKACR,
+ .rate = 0, /* unknown */
+};
+
+struct sh_fsi_platform_info fsi_info = {
+ .porta_flags = SH_FSI_BRS_INV |
+ SH_FSI_OUT_SLAVE_MODE |
+ SH_FSI_IN_SLAVE_MODE |
+ SH_FSI_OFMT(PCM) |
+ SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+ [0] = {
+ .name = "FSI",
+ .start = 0xFE3C0000,
+ .end = 0xFE3C021d,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 108,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device fsi_device = {
+ .name = "sh_fsi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(fsi_resources),
+ .resource = fsi_resources,
+ .dev = {
+ .platform_data = &fsi_info,
+ },
+};
+
/* KEYSC in SoC (Needs SW33-2 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
&sh_eth_device,
&sh7724_usb0_host_device,
&sh7724_usb1_gadget_device,
+ &fsi_device,
};
#define EEPROM_OP 0xBA206000
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+ struct clk *fsia_clk;
/* Reset Release */
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
(1 << 6) | /* VIDEO DAC */
+ (1 << 7) | /* AK4643 */
(1 << 12) | /* USB0 */
(1 << 14)), /* RMII */
FPGA_OUT);
gpio_request(GPIO_FN_KEYOUT1, NULL);
gpio_request(GPIO_FN_KEYOUT0, NULL);
+ /* enable FSI */
+ gpio_request(GPIO_FN_FSIMCKB, NULL);
+ gpio_request(GPIO_FN_FSIMCKA, NULL);
+ gpio_request(GPIO_FN_FSIOASD, NULL);
+ gpio_request(GPIO_FN_FSIIABCK, NULL);
+ gpio_request(GPIO_FN_FSIIALRCK, NULL);
+ gpio_request(GPIO_FN_FSIOABCK, NULL);
+ gpio_request(GPIO_FN_FSIOALRCK, NULL);
+ gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
+ gpio_request(GPIO_FN_FSIIBSD, NULL);
+ gpio_request(GPIO_FN_FSIOBSD, NULL);
+ gpio_request(GPIO_FN_FSIIBBCK, NULL);
+ gpio_request(GPIO_FN_FSIIBLRCK, NULL);
+ gpio_request(GPIO_FN_FSIOBBCK, NULL);
+ gpio_request(GPIO_FN_FSIOBLRCK, NULL);
+ gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+ gpio_request(GPIO_FN_FSIIASD, NULL);
+
+ /* change parent of FSI A */
+ fsia_clk = clk_get(NULL, "fsia_clk");
+ clk_register(&fsimcka_clk);
+ clk_set_parent(fsia_clk, &fsimcka_clk);
+ clk_set_rate(fsia_clk, 11000);
+ clk_set_rate(&fsimcka_clk, 11000);
+ clk_put(fsia_clk);
+
/*
* enable SH-Eth
*
CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000
CONFIG_ENTRY_OFFSET ?= 0x00001000
+suffix-y := bin
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
suffix-$(CONFIG_KERNEL_LZMA) := lzma
-targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma
+targets := zImage vmlinux.srec romImage uImage uImage.srec uImage.gz uImage.bz2 uImage.lzma uImage.bin
extra-y += vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma
subdir- := compressed romimage
$(obj)/uImage.lzma: $(obj)/vmlinux.bin.lzma
$(call if_changed,uimage,lzma)
+$(obj)/uImage.bin: $(obj)/vmlinux.bin
+ $(call if_changed,uimage,none)
+
OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec
$(obj)/vmlinux.srec: $(obj)/compressed/vmlinux
$(call if_changed,objcopy)
# User may have a custom install script
-if [ -x /sbin/installkernel ]; then
- exec /sbin/installkernel "$@"
+if [ -x /sbin/${INSTALLKERNEL} ]; then
+ exec /sbin/${INSTALLKERNEL} "$@"
fi
if [ "$2" = "zImage" ]; then
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:04:11 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:22:50 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
CONFIG_CPU_SUBTYPE_SH7723=y
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:24:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:07 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_MAPLE=y
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Tue Sep 8 13:56:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Wed Aug 26 09:09:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:45:39 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_VIDEO_SH_MOBILE_CEU=y
# CONFIG_V4L_USB_DRIVERS is not set
CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_DAB is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:35 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:13 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=1
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_R3964 is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:55 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:30 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="_edosk7760"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x02000000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_MTD=y
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH7760=y
# CONFIG_I2C_SH_MOBILE is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:27:21 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:58:18 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:12 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:59:45 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
CONFIG_BSD_PROCESS_ACCT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
# CONFIG_CPU_IDLE is not set
# CONFIG_NET is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_HP6XX=y
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
# CONFIG_INPUT_MISC is not set
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:09:16 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:01:48 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 quiet"
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 21:58:52 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:54:22 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
#
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
#
# LPDDR flash memory drivers
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:45 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:05:49 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FONT_8x16=y
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=m
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:29:50 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:09:59 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
#
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:30:31 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:10:49 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:31:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:14:35 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_CPU_SUBTYPE_SH4_202=y
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:17:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
-CONFIG_SUPERH_BUILT_IN_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:33:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:20:53 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4000150
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:34:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:24:31 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
CONFIG_I2C_HIGHLANDER=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:37:20 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:29:23 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_HIGHLANDER=y
# CONFIG_I2C_OCORES is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_4KSTACKS=y
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:39:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:34:29 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
#
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
# CONFIG_NET is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:40:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:35:04 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
# CONFIG_IKCONFIG_PROC is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
#
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_BOOTMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:42:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:36:25 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:19 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:39:48 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_IO_TRAPPED=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_MFD_SM501=y
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
CONFIG_RTC_DRV_R9701=y
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:40:25 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="_SDK7780"
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x01800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:46:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:45:28 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:46:55 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MII=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OXU210HP_HCD is not set
CONFIG_USB_ISP116X_HCD=y
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:05 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:48:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:52 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:49:00 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:53:32 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:50:49 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:11 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:54:24 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Mon Jun 29 16:28:43 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:50:59 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
#
CONFIG_SOLUTION_ENGINE=y
CONFIG_SH_7724_SOLUTION_ENGINE=y
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
#
# Timer and clock configuration
#
# DMA support
#
-# CONFIG_SH_DMA is not set
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=12
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
#
# Companion Chips
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_DMA_CONTIG=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
CONFIG_SOC_CAMERA=y
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
# CONFIG_DAB is not set
#
# CONFIG_LOGO_SUPERH_MONO is not set
# CONFIG_LOGO_SUPERH_VGA16 is not set
CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_FSI_AK4642=y
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_ALL_CODECS=m
+CONFIG_SND_SOC_WM_HUBS=m
+CONFIG_SND_SOC_AD1836=m
+CONFIG_SND_SOC_AD1938=m
+CONFIG_SND_SOC_AD73311=m
+CONFIG_SND_SOC_AK4104=m
+CONFIG_SND_SOC_AK4535=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_CS4270=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_PCM3008=m
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_SSM2602=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC26=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_UDA1380=m
+CONFIG_SND_SOC_WM8510=m
+CONFIG_SND_SOC_WM8523=m
+CONFIG_SND_SOC_WM8580=m
+CONFIG_SND_SOC_WM8728=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8750=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_SOC_WM8776=m
+CONFIG_SND_SOC_WM8900=m
+CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8940=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8961=m
+CONFIG_SND_SOC_WM8971=m
+CONFIG_SND_SOC_WM8974=m
+CONFIG_SND_SOC_WM8988=m
+CONFIG_SND_SOC_WM8990=m
+CONFIG_SND_SOC_WM8993=m
+CONFIG_SND_SOC_WM9081=m
+CONFIG_SND_SOC_MAX9877=m
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
#
# OTG and related infrastructure
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_SPI=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:00:01 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:58:58 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:02:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:01:41 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,38400"
#
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:03:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:03:59 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
CONFIG_CPU_SUBTYPE_SH7780=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00810000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
#
# Bus options
# CONFIG_BT is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_LOGO_SUPERH_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
# CONFIG_SND is not set
CONFIG_SOUND_PRIME=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_NULL is not set
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:04:41 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:07:14 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:13 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:11:49 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
# CONFIG_HID_PID is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:14:00 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
#
# Memory hotplug is currently incompatible with Software Suspend
#
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
# Board support
#
# CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
#
# Timer and clock configuration
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
+CONFIG_PM_RUNTIME=y
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:07:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:15:37 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
CONFIG_CPU_SUBTYPE_SH7763=y
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=y
# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:05 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:17:16 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
CONFIG_CPU_SUBTYPE_SH7770=y
# CONFIG_CPU_SUBTYPE_SH7780 is not set
#
# Memory hotplug is currently incompatible with Software Suspend
#
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_SH_MOBILE=y
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:29 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:39:20 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_GCOV_KERNEL=y
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
#
# CONFIG_SH_HIGHLANDER is not set
CONFIG_SH_SH7785LCR=y
+# CONFIG_SH_SH7785LCR_PT is not set
#
# Timer and clock configuration
CONFIG_SH_PCLK_FREQ=50000000
CONFIG_SH_CLK_CPG=y
CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
# CPU Frequency scaling
#
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
#
# DMA support
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
+CONFIG_SECCOMP=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
#
# Boot options
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
CONFIG_SH_PCIDMA_NONCOHERENT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
CONFIG_NET=y
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOPCA=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_SH_WDT=y
+# CONFIG_SH_WDT_MMAP is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
-CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_SH_MOBILE_LCDC is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=y
+CONFIG_SND_OPL3_LIB_SEQ=y
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=y
+CONFIG_SND_OPL3_LIB=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+CONFIG_SND_CMIPCI=y
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
#
# Special HID drivers
#
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
-# CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=m
# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_ZEROPLUS=m
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
# Miscellaneous USB options
#
-CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
-CONFIG_USB_TEST=m
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_SH is not set
# CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
# CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_PCI_GENERIC is not set
#
# TI VLYNQ
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
+CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_DEBUG_KERNEL is not set
CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
+CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+CONFIG_IRQSOFF_TRACER=y
# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_SCHED_TRACER=y
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_STACK_TRACER=y
+CONFIG_KMEMTRACE=y
+CONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_SH_NO_BSS_INIT is not set
+CONFIG_DWARF_UNWINDER=y
+CONFIG_MCOUNT=y
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:09:34 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:23:18 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOPCA=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_KGDB is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:10:33 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:27:17 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00210000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_KS8842 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_SYSFS is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:11:03 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:29:26 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00010000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00010000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
#
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_HWA_HCD is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
CONFIG_SH_STANDARD_BIOS=y
# CONFIG_EARLY_SCIF_CONSOLE is not set
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
CONFIG_DEBUG_STACK_USAGE=y
CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:03:04 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:33:00 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:35:03 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
# CONFIG_SYSVIPC is not set
# CONFIG_BSD_PROCESS_ACCT is not set
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:36:36 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_BOOT_LINK_OFFSET=0x009e0000
CONFIG_ENTRY_OFFSET=0x00001000
# CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
#
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
CONFIG_MTD=m
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
#
# User Modules And Translation Layers
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:14:36 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:42:33 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
#
# System type
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
#
#
# Power management options (EXPERIMENTAL)
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
# CONFIG_CPU_IDLE is not set
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_LIBFC is not set
# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_MV is not set
# CONFIG_KS8842 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=m
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
# CONFIG_IWM is not set
#
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_SL811_HCD is not set
CONFIG_USB_R8A66597_HCD=y
-# CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
# CONFIG_USB_HWA_HCD is not set
#
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
#
# Security options
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:15:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:46:13 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_ARCH_SUSPEND_POSSIBLE is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_SMP=y
CONFIG_SYS_SUPPORTS_NUMA=y
CONFIG_SYS_SUPPORTS_PCI=y
CONFIG_SYS_SUPPORTS_TMU=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
-# CONFIG_CLASSIC_RCU is not set
CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_NR_QUICK=2
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
#
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_SECCOMP=y
+# CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
#
# Bus options
# CONFIG_SH_PCIDMA_NONCOHERENT is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Network testing
#
# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
#
# CFG80211 needs to be enabled for MAC80211
#
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
CONFIG_SATA_SIL24=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
#
#
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOPCA=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SH_MOBILE is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# PCI GPIO expanders:
#
# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
-CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y
#
# Graphics support
#
+CONFIG_VGA_ARB=y
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
CONFIG_HID_EZKEY=y
# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
CONFIG_EXT4_FS_XATTR=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
# CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_EARLY_SCIF_CONSOLE=y
CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000
CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_4KSTACKS is not set
# CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
# CONFIG_SH_NO_BSS_INIT is not set
#
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
CONFIG_GENERIC_ATOMIC64=y
menu "DMA support"
-config SH_DMA_API
- bool
config SH_DMA
bool "SuperH on-chip DMA controller (DMAC) support"
depends on CPU_SH3 || CPU_SH4
- select SH_DMA_API
default n
config SH_DMA_IRQ_MULTI
CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \
CPU_SUBTYPE_SH7760
+config SH_DMA_API
+ depends on SH_DMA
+ bool "SuperH DMA API support"
+ default n
+ help
+ SH_DMA_API always enabled DMA API of used SuperH.
+ If you want to use DMA ENGINE, you must not enable this.
+ Please enable DMA_ENGINE and SH_DMAE.
+
config NR_ONCHIP_DMA_CHANNELS
int
depends on SH_DMA
# Makefile for the SuperH DMA specific kernel interface routines under Linux.
#
-obj-$(CONFIG_SH_DMA_API) += dma-api.o dma-sysfs.o
-obj-$(CONFIG_SH_DMA) += dma-sh.o
+obj-$(CONFIG_SH_DMA_API) += dma-sh.o dma-api.o dma-sysfs.o
obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o
obj-$(CONFIG_G2_DMA) += dma-g2.o
obj-$(CONFIG_SH_DMABRG) += dmabrg.o
#define CHCR 0x0C
#define DMAOR 0x40
+/*
+ * for dma engine
+ *
+ * SuperH DMA mode
+ */
+#define SHDMA_MIX_IRQ (1 << 1)
+#define SHDMA_DMAOR1 (1 << 2)
+#define SHDMA_DMAE1 (1 << 3)
+
+struct sh_dmae_pdata {
+ unsigned int mode;
+};
+
#endif /* __DMA_SH_H */
void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
#else
#define cpu_to_node(cpu) ((void)(cpu),0)
#define parent_node(node) ((void)(node),0)
-#define node_to_cpumask(node) ((void)node, cpu_online_map)
#define cpumask_of_node(node) ((void)node, cpu_online_mask)
#define pcibus_to_node(bus) ((void)(bus), -1)
mov.l 1f, r0
mov.l @r0, r6
- sti
-
mov.l 3f, r0
mov.l 4f, r1
mov r15, r4
#include <linux/sh_timer.h>
#include <asm/clock.h>
#include <asm/mmzone.h>
+#include <asm/dma-sh.h>
#include <cpu/sh7722.h>
static struct resource rtc_resources[] = {
},
};
+static struct sh_dmae_pdata dma_platform_data = {
+ .mode = 0,
+};
+
+static struct platform_device dma_device = {
+ .name = "sh-dma-engine",
+ .id = -1,
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
static struct platform_device *sh7722_devices[] __initdata = {
&cmt_device,
&tmu0_device,
&vpu_device,
&veu_device,
&jpu_device,
+ &dma_device,
};
static int __init sh7722_devices_setup(void)
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_timer.h>
+#include <asm/dma-sh.h>
static struct sh_timer_config tmu0_platform_data = {
.name = "TMU0",
},
};
+static struct sh_dmae_pdata dma_platform_data = {
+ .mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1),
+};
+
+static struct platform_device dma_device = {
+ .name = "sh-dma-engine",
+ .id = -1,
+ .dev = {
+ .platform_data = &dma_platform_data,
+ },
+};
+
static struct platform_device *sh7780_devices[] __initdata = {
&tmu0_device,
&tmu1_device,
&tmu5_device,
&rtc_device,
&sci_device,
+ &dma_device,
};
static int __init sh7780_devices_setup(void)
#include <linux/list.h>
#include <linux/mempool.h>
#include <linux/mm.h>
+#include <linux/ftrace.h>
#include <asm/dwarf.h>
#include <asm/unwinder.h>
#include <asm/sections.h>
#include <asm/unaligned.h>
-#include <asm/dwarf.h>
#include <asm/stacktrace.h>
/* Reserve enough memory for two stack frames */
if (!pc && !prev)
pc = (unsigned long)current_text_addr();
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+ /*
+ * If our stack has been patched by the function graph tracer
+ * then we might see the address of return_to_handler() where we
+ * expected to find the real return address.
+ */
+ if (pc == (unsigned long)&return_to_handler) {
+ int index = current->curr_ret_stack;
+
+ /*
+ * We currently have no way of tracking how many
+ * return_to_handler()'s we've seen. If there is more
+ * than one patched return address on our stack,
+ * complain loudly.
+ */
+ WARN_ON(index > 0);
+
+ pc = current->ret_stack[index].ret;
+ }
+#endif
+
frame = mempool_alloc(dwarf_frame_pool, GFP_ATOMIC);
if (!frame) {
printk(KERN_ERR "Unable to allocate a dwarf frame\n");
ENTRY(resume_userspace)
! r8: current_thread_info
cli
- TRACE_IRQS_OfF
+ TRACE_IRQS_OFF
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #(_TIF_WORK_MASK & 0xff), r0
bt/s __restore_all
return syscalls_metadata[nr];
}
-void arch_init_ftrace_syscalls(void)
+int syscall_name_to_nr(char *name)
+{
+ int i;
+
+ if (!syscalls_metadata)
+ return -1;
+ for (i = 0; i < NR_syscalls; i++)
+ if (syscalls_metadata[i])
+ if (!strcmp(syscalls_metadata[i]->name, name))
+ return i;
+ return -1;
+}
+
+void set_syscall_enter_id(int num, int id)
+{
+ syscalls_metadata[num]->enter_id = id;
+}
+
+void set_syscall_exit_id(int num, int id)
+{
+ syscalls_metadata[num]->exit_id = id;
+}
+
+static int __init arch_init_ftrace_syscalls(void)
{
int i;
struct syscall_metadata *meta;
unsigned long **psys_syscall_table = &sys_call_table;
- static atomic_t refs;
-
- if (atomic_inc_return(&refs) != 1)
- goto end;
syscalls_metadata = kzalloc(sizeof(*syscalls_metadata) *
FTRACE_SYSCALL_MAX, GFP_KERNEL);
if (!syscalls_metadata) {
WARN_ON(1);
- return;
+ return -ENOMEM;
}
for (i = 0; i < FTRACE_SYSCALL_MAX; i++) {
meta = find_syscall_meta(psys_syscall_table[i]);
syscalls_metadata[i] = meta;
}
- return;
- /* Paranoid: avoid overflow */
-end:
- atomic_dec(&refs);
+ return 0;
}
+arch_initcall(arch_init_ftrace_syscalls);
#endif /* CONFIG_FTRACE_SYSCALLS */
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
void __iomem *generic_ioport_map(unsigned long addr, unsigned int size)
{
+ if (PXSEG(addr) >= P1SEG)
+ return (void __iomem *)addr;
+
return (void __iomem *)(addr + generic_io_base);
}
#include <linux/module.h>
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
+#include <linux/ftrace.h>
#include <asm/processor.h>
#include <asm/machvec.h>
#include <asm/uaccess.h>
static union irq_ctx *softirq_ctx[NR_CPUS] __read_mostly;
#endif
-asmlinkage int do_IRQ(unsigned int irq, struct pt_regs *regs)
+asmlinkage __irq_entry int do_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
#ifdef CONFIG_IRQSTACKS
}
#ifdef CONFIG_IRQSTACKS
-static char softirq_stack[NR_CPUS * THREAD_SIZE]
- __attribute__((__section__(".bss.page_aligned")));
+static char softirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
-static char hardirq_stack[NR_CPUS * THREAD_SIZE]
- __attribute__((__section__(".bss.page_aligned")));
+static char hardirq_stack[NR_CPUS * THREAD_SIZE] __page_aligned_bss;
/*
* allocate per-cpu stacks for hardirq and for softirq processing
#include <linux/string.h>
#include <asm/machvec.h>
#include <asm/sections.h>
+#include <asm/addrspace.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/irq.h>
if (!sh_mv.mv_nr_irqs)
sh_mv.mv_nr_irqs = NR_IRQS;
+
+ __set_io_port_base(P2SEG);
}
if (cpu == 0)
seq_printf(m, "machine\t\t: %s\n", get_system_type());
+ else
+ seq_printf(m, "\n");
seq_printf(m, "processor\t: %d\n", cpu);
seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine);
DECLARE_EXPORT(__movstr_i4_even);
DECLARE_EXPORT(__movstr_i4_odd);
DECLARE_EXPORT(__movstrSI12_i4);
+DECLARE_EXPORT(__movmem);
+DECLARE_EXPORT(__movmemSI8);
+DECLARE_EXPORT(__movmemSI12);
+DECLARE_EXPORT(__movmemSI16);
+DECLARE_EXPORT(__movmemSI20);
+DECLARE_EXPORT(__movmemSI24);
+DECLARE_EXPORT(__movmemSI28);
+DECLARE_EXPORT(__movmemSI32);
+DECLARE_EXPORT(__movmemSI36);
+DECLARE_EXPORT(__movmemSI40);
+DECLARE_EXPORT(__movmemSI44);
+DECLARE_EXPORT(__movmemSI48);
+DECLARE_EXPORT(__movmemSI52);
+DECLARE_EXPORT(__movmemSI56);
+DECLARE_EXPORT(__movmemSI60);
DECLARE_EXPORT(__movmem_i4_even);
DECLARE_EXPORT(__movmem_i4_odd);
DECLARE_EXPORT(__movmemSI12_i4);
{
struct task_struct *tsk = current;
- if (!(current_cpu_data.flags & CPU_HAS_FPU))
+ if (!(boot_cpu_data.flags & CPU_HAS_FPU))
return 0;
set_used_math();
{
struct task_struct *tsk = current;
- if (!(current_cpu_data.flags & CPU_HAS_FPU))
+ if (!(boot_cpu_data.flags & CPU_HAS_FPU))
return 0;
if (!used_math()) {
#undef COPY
#ifdef CONFIG_SH_FPU
- if (current_cpu_data.flags & CPU_HAS_FPU) {
+ if (boot_cpu_data.flags & CPU_HAS_FPU) {
int owned_fp;
struct task_struct *tsk = current;
err |= __put_user(OR_R0_R0, &frame->retcode[6]);
err |= __put_user((__NR_rt_sigreturn), &frame->retcode[7]);
regs->pr = (unsigned long) frame->retcode;
+ flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
}
if (err)
pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n",
current->comm, task_pid_nr(current), frame, regs->pc, regs->pr);
- flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode));
-
return 0;
give_sigsegv:
{
struct sh_cpuinfo *c = cpu_data + cpu;
+ memcpy(c, &boot_cpu_data, sizeof(struct sh_cpuinfo));
+
c->loops_per_jiffy = loops_per_jiffy;
}
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/ipc.h>
#include <linux/stat.h>
#include <linux/mman.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/syscalls.h>
#include <linux/ipc.h>
#include <asm/uaccess.h>
#include <linux/kexec.h>
#include <linux/limits.h>
#include <linux/proc_fs.h>
+#include <linux/sysfs.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/fpu.h>
/* bitfield: 1: warn 2: fixup 4: signal -> combinations 2|4 && 1|2|4 are not
valid! */
static int se_usermode = 3;
-/* 0: no warning 1: print a warning message */
-static int se_kernmode_warn = 1;
+/* 0: no warning 1: print a warning message, disabled by default */
+static int se_kernmode_warn;
#ifdef CONFIG_PROC_FS
static const char *se_usermode_action[] = {
oops_enter();
- console_verbose();
spin_lock_irq(&die_lock);
+ console_verbose();
bust_spinlocks(1);
printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
-
+ sysfs_printk_last_file();
print_modules();
show_regs(regs);
bust_spinlocks(0);
add_taint(TAINT_DIE);
spin_unlock_irq(&die_lock);
+ oops_exit();
if (kexec_should_crash(current))
crash_kexec(regs);
if (panic_on_oops)
panic("Fatal exception");
- oops_exit();
do_exit(SIGSEGV);
}
u_int rm;
int ret, index;
+ /*
+ * XXX: We can't handle mixed 16/32-bit instructions yet
+ */
+ if (instruction_size(instruction) != 2)
+ return -EINVAL;
+
index = (instruction>>8)&15; /* 0x0F00 */
rm = regs->regs[index];
se_user += 1;
-#ifndef CONFIG_CPU_SH2A
set_fs(USER_DS);
- if (copy_from_user(&instruction, (u16 *)(regs->pc & ~1), 2)) {
+ if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
+ sizeof(instruction))) {
set_fs(oldfs);
goto uspace_segv;
}
"in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
current->comm, current->pid, (void *)regs->pc,
instruction);
-#endif
if (se_usermode & 2)
goto fixup;
} else {
se_sys += 1;
- if (se_kernmode_warn)
- printk(KERN_NOTICE "Unaligned kernel access "
- "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
- current->comm, current->pid, (void *)regs->pc,
- instruction);
-
if (regs->pc & 1)
die("unaligned program counter", regs, error_code);
die("insn faulting in do_address_error", regs, 0);
}
+ if (se_kernmode_warn)
+ printk(KERN_NOTICE "Unaligned kernel access "
+ "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+ current->comm, current->pid, (void *)regs->pc,
+ instruction);
+
handle_unaligned_access(instruction, regs,
&user_mem_access, 0);
set_fs(oldfs);
export CPPFLAGS_vsyscall.lds += -P -C -Ush
vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 \
- $(call ld-option, -Wl$(comma)--hash-style=sysv)
+ $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
SYSCFLAGS_vsyscall-trapa.so = $(vsyscall-flags)
choice
prompt "HugeTLB page size"
- depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU
+ depends on HUGETLB_PAGE
default HUGETLB_PAGE_SIZE_1MB if PAGE_SIZE_64KB
default HUGETLB_PAGE_SIZE_64K
#define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */
#define MAX_ICACHE_PAGES 32
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
unsigned long exec_offset);
/*
* Called from kernel/module.c:sys_init_module and routine for a.out format,
* signal handler code and kprobes code
*/
-static void sh4_flush_icache_range(void *args)
+static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
{
struct flusher_data *data = args;
unsigned long start, end;
local_irq_restore(flags);
}
-static inline void flush_cache_4096(unsigned long start,
- unsigned long phys)
+static inline void flush_cache_one(unsigned long start, unsigned long phys)
{
unsigned long flags, exec_offset = 0;
exec_offset = 0x20000000;
local_irq_save(flags);
- __flush_cache_4096(start | SH_CACHE_ASSOC,
- P1SEGADDR(phys), exec_offset);
+ __flush_cache_one(start | SH_CACHE_ASSOC, P1SEGADDR(phys), exec_offset);
local_irq_restore(flags);
}
/* Loop all the D-cache */
n = boot_cpu_data.dcache.n_aliases;
- for (i = 0; i < n; i++, addr += 4096)
- flush_cache_4096(addr, phys);
+ for (i = 0; i < n; i++, addr += PAGE_SIZE)
+ flush_cache_one(addr, phys);
}
wmb();
/* We only need to flush D-cache when we have alias */
if ((address^phys) & alias_mask) {
/* Loop 4K of the D-cache */
- flush_cache_4096(
+ flush_cache_one(
CACHE_OC_ADDRESS_ARRAY | (address & alias_mask),
phys);
/* Loop another 4K of the D-cache */
- flush_cache_4096(
+ flush_cache_one(
CACHE_OC_ADDRESS_ARRAY | (phys & alias_mask),
phys);
}
* kernel has never executed the code through its identity
* translation.
*/
- flush_cache_4096(
+ flush_cache_one(
CACHE_IC_ADDRESS_ARRAY | (address & alias_mask),
phys);
}
}
/**
- * __flush_cache_4096
+ * __flush_cache_one
*
* @addr: address in memory mapped cache array
* @phys: P1 address to flush (has to match tags if addr has 'A' bit
* operation (purge/write-back) is selected by the lower 2 bits of
* 'phys'.
*/
-static void __flush_cache_4096(unsigned long addr, unsigned long phys,
+static void __flush_cache_one(unsigned long addr, unsigned long phys,
unsigned long exec_offset)
{
int way_count;
/*
* Writeback&Invalidate the D-cache of the page
*/
-static void __flush_dcache_page(unsigned long phys)
+static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys)
{
unsigned long ways, waysize, addrstart;
unsigned long flags;
__flush_dcache_page(PHYSADDR(page_address(page)));
}
-static void sh7705_flush_cache_all(void *args)
+static void __uses_jump_to_uncached sh7705_flush_cache_all(void *args)
{
unsigned long flags;
return;
page = pfn_to_page(pfn);
- if (pfn_valid(pfn) && page_mapping(page)) {
+ if (pfn_valid(pfn)) {
int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
if (dirty) {
unsigned long addr = (unsigned long)page_address(page);
void __init cpu_cache_init(void)
{
+ unsigned int cache_disabled = !(__raw_readl(CCR) & CCR_CACHE_ENABLE);
+
compute_alias(&boot_cpu_data.icache);
compute_alias(&boot_cpu_data.dcache);
compute_alias(&boot_cpu_data.scache);
__flush_purge_region = noop__flush_region;
__flush_invalidate_region = noop__flush_region;
+ /*
+ * No flushing is necessary in the disabled cache case so we can
+ * just keep the noop functions in local_flush_..() and __flush_..()
+ */
+ if (unlikely(cache_disabled))
+ goto skip;
+
if (boot_cpu_data.family == CPU_FAMILY_SH2) {
extern void __weak sh2_cache_init(void);
sh5_cache_init();
}
+skip:
emit_cache_params();
}
*
* PMB entries are all pre-faulted.
*/
- if (unlikely(size >= 0x1000000)) {
+ if (unlikely(phys_addr >= P1SEG)) {
unsigned long mapped = pmb_remap(addr, phys_addr, size, flags);
if (likely(mapped)) {
#define NR_PMB_ENTRIES 16
+static void __pmb_unmap(struct pmb_entry *);
+
static struct kmem_cache *pmb_cache;
static unsigned long pmb_map;
long pmb_remap(unsigned long vaddr, unsigned long phys,
unsigned long size, unsigned long flags)
{
- struct pmb_entry *pmbp;
+ struct pmb_entry *pmbp, *pmbe;
unsigned long wanted;
int pmb_flags, i;
+ long err;
/* Convert typical pgprot value to the PMB equivalent */
if (flags & _PAGE_CACHABLE) {
again:
for (i = 0; i < ARRAY_SIZE(pmb_sizes); i++) {
- struct pmb_entry *pmbe;
int ret;
if (size < pmb_sizes[i].size)
continue;
pmbe = pmb_alloc(vaddr, phys, pmb_flags | pmb_sizes[i].flag);
- if (IS_ERR(pmbe))
- return PTR_ERR(pmbe);
+ if (IS_ERR(pmbe)) {
+ err = PTR_ERR(pmbe);
+ goto out;
+ }
ret = set_pmb_entry(pmbe);
if (ret != 0) {
pmb_free(pmbe);
- return -EBUSY;
+ err = -EBUSY;
+ goto out;
}
phys += pmb_sizes[i].size;
pmbp->link = pmbe;
pmbp = pmbe;
+
+ /*
+ * Instead of trying smaller sizes on every iteration
+ * (even if we succeed in allocating space), try using
+ * pmb_sizes[i].size again.
+ */
+ i--;
}
if (size >= 0x1000000)
goto again;
return wanted - size;
+
+out:
+ if (pmbp)
+ __pmb_unmap(pmbp);
+
+ return err;
}
void pmb_unmap(unsigned long addr)
if (unlikely(!pmbe))
return;
+ __pmb_unmap(pmbe);
+}
+
+static void __pmb_unmap(struct pmb_entry *pmbe)
+{
WARN_ON(!test_bit(pmbe->entry, &pmb_map));
do {
struct pmb_entry *pmblink = pmbe;
- clear_pmb_entry(pmbe);
+ if (pmbe->entry != PMB_NO_ENTRY)
+ clear_pmb_entry(pmbe);
+
pmbe = pmblink->link;
pmb_free(pmblink);
select RTC_CLASS
select RTC_DRV_M48T59
select HAVE_PERF_EVENTS
+ select PERF_USE_VMALLOC
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
select RTC_DRV_SUN4V
select RTC_DRV_STARFIRE
select HAVE_PERF_EVENTS
+ select PERF_USE_VMALLOC
config ARCH_DEFCONFIG
string
config NEED_PER_CPU_EMBED_FIRST_CHUNK
def_bool y if SPARC64
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+ def_bool y if SPARC64
+
config GENERIC_HARDIRQS_NO__DO_IRQ
bool
def_bool y if SPARC64
#KBUILD_CFLAGS += -g -pipe -fcall-used-g5 -fcall-used-g7
KBUILD_CFLAGS += -m32 -pipe -mno-fpu -fcall-used-g5 -fcall-used-g7
KBUILD_AFLAGS += -m32
-CPPFLAGS_vmlinux.lds += -m32
#LDFLAGS_vmlinux = -N -Ttext 0xf0004000
# Since 2.5.40, the first stage is left not btfix-ed.
CHECKFLAGS += -D__sparc__ -D__sparc_v9__ -D__arch64__ -m64
-# Undefine sparc when processing vmlinux.lds - it is used
-# And teach CPP we are doing 64 bit builds (for this case)
-CPPFLAGS_vmlinux.lds += -m64 -Usparc
LDFLAGS := -m elf64_sparc
export BITS := 64
#ifndef __SPARC_HARDIRQ_H
#define __SPARC_HARDIRQ_H
-#include <linux/threads.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-
-/* entry.S is sensitive to the offsets of these fields */ /* XXX P3 Is it? */
-typedef struct {
- unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
#define HARDIRQ_BITS 8
+#include <asm-generic/hardirq.h>
#endif /* __SPARC_HARDIRQ_H */
#ifndef _SPARC_IRQ_H
#define _SPARC_IRQ_H
-#include <linux/interrupt.h>
-
#define NR_IRQS 16
+#include <linux/interrupt.h>
+
#define irq_canonicalize(irq) (irq)
extern void __init init_IRQ(void);
#define LOW_OBP_ADDRESS _AC(0x00000000f0000000,UL)
#define HI_OBP_ADDRESS _AC(0x0000000100000000,UL)
#define VMALLOC_START _AC(0x0000000100000000,UL)
-#define VMALLOC_END _AC(0x0000000200000000,UL)
-#define VMEMMAP_BASE _AC(0x0000000200000000,UL)
+#define VMALLOC_END _AC(0x0000010000000000,UL)
+#define VMEMMAP_BASE _AC(0x0000010000000000,UL)
#define vmemmap ((struct page *)VMEMMAP_BASE)
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
* General functions that each host system must provide.
#define parent_node(node) (node)
-static inline cpumask_t node_to_cpumask(int node)
-{
- return numa_cpumask_lookup_table[node];
-}
#define cpumask_of_node(node) (&numa_cpumask_lookup_table[node])
-/*
- * Returns a pointer to the cpumask of CPUs on Node 'node'.
- * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"
- */
-#define node_to_cpumask_ptr(v, node) \
- cpumask_t *v = &(numa_cpumask_lookup_table[node])
-
-#define node_to_cpumask_ptr_next(v, node) \
- v = &(numa_cpumask_lookup_table[node])
-
struct pci_bus;
#ifdef CONFIG_PCI
extern int pcibus_to_node(struct pci_bus *pbus);
#ifdef CONFIG_SMP
#define topology_physical_package_id(cpu) (cpu_data(cpu).proc_id)
#define topology_core_id(cpu) (cpu_data(cpu).core_id)
-#define topology_core_siblings(cpu) (cpu_core_map[cpu])
-#define topology_thread_siblings(cpu) (per_cpu(cpu_sibling_map, cpu))
#define topology_core_cpumask(cpu) (&cpu_core_map[cpu])
#define topology_thread_cpumask(cpu) (&per_cpu(cpu_sibling_map, cpu))
#define mc_capable() (sparc64_multi_core)
static inline u32 vio_dring_avail(struct vio_dring_state *dr,
unsigned int ring_size)
{
- MAYBE_BUILD_BUG_ON(!is_power_of_2(ring_size));
-
return (dr->pending -
((dr->prod - dr->cons) & (ring_size - 1)));
}
extra-y := head_$(BITS).o
extra-y += init_task.o
-extra-y += vmlinux.lds
+
+# Undefine sparc when processing vmlinux.lds - it is used
+# And teach CPP we are doing $(BITS) builds (for this case)
+CPPFLAGS_vmlinux.lds := -Usparc -m$(BITS)
+extra-y += vmlinux.lds
obj-$(CONFIG_SPARC32) += entry.o wof.o wuf.o
obj-$(CONFIG_SPARC32) += etrap_32.o
* If this is not aligned on a 8k boundry, then you should change code
* in etrap.S which assumes it.
*/
-union thread_union init_thread_union
- __attribute__((section (".data.init_task")))
- = { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
#ifdef CONFIG_SPARSEMEM_VMEMMAP
/* Do not use the TSB for vmemmap. */
- mov (VMEMMAP_BASE >> 24), %g5
- sllx %g5, 24, %g5
+ mov (VMEMMAP_BASE >> 40), %g5
+ sllx %g5, 40, %g5
cmp %g4,%g5
bgeu,pn %xcc, kvmap_vmemmap
nop
sethi %hi(MODULES_VADDR), %g5
cmp %g4, %g5
blu,pn %xcc, kvmap_dtlb_longpath
- mov (VMALLOC_END >> 24), %g5
- sllx %g5, 24, %g5
+ mov (VMALLOC_END >> 40), %g5
+ sllx %g5, 40, %g5
cmp %g4, %g5
bgeu,pn %xcc, kvmap_dtlb_longpath
nop
snprintf(lp->tx_irq_name, LDC_IRQ_NAME_MAX, "%s TX", name);
err = request_irq(lp->cfg.rx_irq, ldc_rx,
- IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+ IRQF_SAMPLE_RANDOM | IRQF_DISABLED | IRQF_SHARED,
lp->rx_irq_name, lp);
if (err)
return err;
err = request_irq(lp->cfg.tx_irq, ldc_tx,
- IRQF_SAMPLE_RANDOM | IRQF_SHARED,
+ IRQF_SAMPLE_RANDOM | IRQF_DISABLED | IRQF_SHARED,
lp->tx_irq_name, lp);
if (err) {
free_irq(lp->cfg.rx_irq, lp);
struct perf_event *events[MAX_HWEVENTS];
unsigned long used_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
unsigned long active_mask[BITS_TO_LONGS(MAX_HWEVENTS)];
- int enabled;
+ u64 pcr;
+ int enabled;
};
DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, };
#define PIC_LOWER 0x02
};
+static unsigned long perf_event_encode(const struct perf_event_map *pmap)
+{
+ return ((unsigned long) pmap->encoding << 16) | pmap->pic_mask;
+}
+
+static void perf_event_decode(unsigned long val, u16 *enc, u8 *msk)
+{
+ *msk = val & 0xff;
+ *enc = val >> 16;
+}
+
+#define C(x) PERF_COUNT_HW_CACHE_##x
+
+#define CACHE_OP_UNSUPPORTED 0xfffe
+#define CACHE_OP_NONSENSE 0xffff
+
+typedef struct perf_event_map cache_map_t
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX];
+
struct sparc_pmu {
const struct perf_event_map *(*event_map)(int);
+ const cache_map_t *cache_map;
int max_events;
int upper_shift;
int lower_shift;
int lower_nop;
};
-static const struct perf_event_map ultra3i_perfmon_event_map[] = {
+static const struct perf_event_map ultra3_perfmon_event_map[] = {
[PERF_COUNT_HW_CPU_CYCLES] = { 0x0000, PIC_UPPER | PIC_LOWER },
[PERF_COUNT_HW_INSTRUCTIONS] = { 0x0001, PIC_UPPER | PIC_LOWER },
[PERF_COUNT_HW_CACHE_REFERENCES] = { 0x0009, PIC_LOWER },
[PERF_COUNT_HW_CACHE_MISSES] = { 0x0009, PIC_UPPER },
};
-static const struct perf_event_map *ultra3i_event_map(int event_id)
+static const struct perf_event_map *ultra3_event_map(int event_id)
{
- return &ultra3i_perfmon_event_map[event_id];
+ return &ultra3_perfmon_event_map[event_id];
}
-static const struct sparc_pmu ultra3i_pmu = {
- .event_map = ultra3i_event_map,
- .max_events = ARRAY_SIZE(ultra3i_perfmon_event_map),
+static const cache_map_t ultra3_cache_map = {
+[C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x09, PIC_LOWER, },
+ [C(RESULT_MISS)] = { 0x09, PIC_UPPER, },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { 0x0a, PIC_LOWER },
+ [C(RESULT_MISS)] = { 0x0a, PIC_UPPER },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x09, PIC_LOWER, },
+ [C(RESULT_MISS)] = { 0x09, PIC_UPPER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+ [ C(RESULT_MISS) ] = { CACHE_OP_NONSENSE },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x0c, PIC_LOWER, },
+ [C(RESULT_MISS)] = { 0x0c, PIC_UPPER, },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { 0x0c, PIC_LOWER },
+ [C(RESULT_MISS)] = { 0x0c, PIC_UPPER },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x12, PIC_UPPER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x11, PIC_UPPER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+};
+
+static const struct sparc_pmu ultra3_pmu = {
+ .event_map = ultra3_event_map,
+ .cache_map = &ultra3_cache_map,
+ .max_events = ARRAY_SIZE(ultra3_perfmon_event_map),
.upper_shift = 11,
.lower_shift = 4,
.event_mask = 0x3f,
.lower_nop = 0x14,
};
+/* Niagara1 is very limited. The upper PIC is hard-locked to count
+ * only instructions, so it is free running which creates all kinds of
+ * problems. Some hardware designs make one wonder if the creator
+ * even looked at how this stuff gets used by software.
+ */
+static const struct perf_event_map niagara1_perfmon_event_map[] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, PIC_UPPER },
+ [PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, PIC_UPPER },
+ [PERF_COUNT_HW_CACHE_REFERENCES] = { 0, PIC_NONE },
+ [PERF_COUNT_HW_CACHE_MISSES] = { 0x03, PIC_LOWER },
+};
+
+static const struct perf_event_map *niagara1_event_map(int event_id)
+{
+ return &niagara1_perfmon_event_map[event_id];
+}
+
+static const cache_map_t niagara1_cache_map = {
+[C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x03, PIC_LOWER, },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x03, PIC_LOWER, },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x00, PIC_UPPER },
+ [C(RESULT_MISS)] = { 0x02, PIC_LOWER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+ [ C(RESULT_MISS) ] = { CACHE_OP_NONSENSE },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x07, PIC_LOWER, },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x07, PIC_LOWER, },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x05, PIC_LOWER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x04, PIC_LOWER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+};
+
+static const struct sparc_pmu niagara1_pmu = {
+ .event_map = niagara1_event_map,
+ .cache_map = &niagara1_cache_map,
+ .max_events = ARRAY_SIZE(niagara1_perfmon_event_map),
+ .upper_shift = 0,
+ .lower_shift = 4,
+ .event_mask = 0x7,
+ .upper_nop = 0x0,
+ .lower_nop = 0x0,
+};
+
static const struct perf_event_map niagara2_perfmon_event_map[] = {
[PERF_COUNT_HW_CPU_CYCLES] = { 0x02ff, PIC_UPPER | PIC_LOWER },
[PERF_COUNT_HW_INSTRUCTIONS] = { 0x02ff, PIC_UPPER | PIC_LOWER },
return &niagara2_perfmon_event_map[event_id];
}
+static const cache_map_t niagara2_cache_map = {
+[C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x0208, PIC_UPPER | PIC_LOWER, },
+ [C(RESULT_MISS)] = { 0x0302, PIC_UPPER | PIC_LOWER, },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { 0x0210, PIC_UPPER | PIC_LOWER, },
+ [C(RESULT_MISS)] = { 0x0302, PIC_UPPER | PIC_LOWER, },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x02ff, PIC_UPPER | PIC_LOWER, },
+ [C(RESULT_MISS)] = { 0x0301, PIC_UPPER | PIC_LOWER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_NONSENSE },
+ [ C(RESULT_MISS) ] = { CACHE_OP_NONSENSE },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { 0x0208, PIC_UPPER | PIC_LOWER, },
+ [C(RESULT_MISS)] = { 0x0330, PIC_UPPER | PIC_LOWER, },
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = { 0x0210, PIC_UPPER | PIC_LOWER, },
+ [C(RESULT_MISS)] = { 0x0320, PIC_UPPER | PIC_LOWER, },
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0x0b08, PIC_UPPER | PIC_LOWER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { 0xb04, PIC_UPPER | PIC_LOWER, },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+[C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = { CACHE_OP_UNSUPPORTED },
+ [C(RESULT_MISS)] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_WRITE) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+ [ C(OP_PREFETCH) ] = {
+ [ C(RESULT_ACCESS) ] = { CACHE_OP_UNSUPPORTED },
+ [ C(RESULT_MISS) ] = { CACHE_OP_UNSUPPORTED },
+ },
+},
+};
+
static const struct sparc_pmu niagara2_pmu = {
.event_map = niagara2_event_map,
+ .cache_map = &niagara2_cache_map,
.max_events = ARRAY_SIZE(niagara2_perfmon_event_map),
.upper_shift = 19,
.lower_shift = 6,
.event_mask = 0xfff,
.hv_bit = 0x8,
- .irq_bit = 0x03,
+ .irq_bit = 0x30,
.upper_nop = 0x220,
.lower_nop = 0x220,
};
sparc_pmu->lower_nop, idx);
}
-static inline void sparc_pmu_enable_event(struct hw_perf_event *hwc,
- int idx)
+static inline void sparc_pmu_enable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx)
{
u64 val, mask = mask_for_index(idx);
- val = pcr_ops->read();
- pcr_ops->write((val & ~mask) | hwc->config);
+ val = cpuc->pcr;
+ val &= ~mask;
+ val |= hwc->config;
+ cpuc->pcr = val;
+
+ pcr_ops->write(cpuc->pcr);
}
-static inline void sparc_pmu_disable_event(struct hw_perf_event *hwc,
- int idx)
+static inline void sparc_pmu_disable_event(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc, int idx)
{
u64 mask = mask_for_index(idx);
u64 nop = nop_for_index(idx);
- u64 val = pcr_ops->read();
+ u64 val;
- pcr_ops->write((val & ~mask) | nop);
+ val = cpuc->pcr;
+ val &= ~mask;
+ val |= nop;
+ cpuc->pcr = val;
+
+ pcr_ops->write(cpuc->pcr);
}
void hw_perf_enable(void)
cpuc->enabled = 1;
barrier();
- val = pcr_ops->read();
+ val = cpuc->pcr;
for (i = 0; i < MAX_HWEVENTS; i++) {
struct perf_event *cp = cpuc->events[i];
val |= hwc->config_base;
}
- pcr_ops->write(val);
+ cpuc->pcr = val;
+
+ pcr_ops->write(cpuc->pcr);
}
void hw_perf_disable(void)
cpuc->enabled = 0;
- val = pcr_ops->read();
+ val = cpuc->pcr;
val &= ~(PCR_UTRACE | PCR_STRACE |
sparc_pmu->hv_bit | sparc_pmu->irq_bit);
- pcr_ops->write(val);
+ cpuc->pcr = val;
+
+ pcr_ops->write(cpuc->pcr);
}
static u32 read_pmc(int idx)
}
static int sparc_perf_event_set_period(struct perf_event *event,
- struct hw_perf_event *hwc, int idx)
+ struct hw_perf_event *hwc, int idx)
{
s64 left = atomic64_read(&hwc->period_left);
s64 period = hwc->sample_period;
if (test_and_set_bit(idx, cpuc->used_mask))
return -EAGAIN;
- sparc_pmu_disable_event(hwc, idx);
+ sparc_pmu_disable_event(cpuc, hwc, idx);
cpuc->events[idx] = event;
set_bit(idx, cpuc->active_mask);
sparc_perf_event_set_period(event, hwc, idx);
- sparc_pmu_enable_event(hwc, idx);
+ sparc_pmu_enable_event(cpuc, hwc, idx);
perf_event_update_userpage(event);
return 0;
}
static u64 sparc_perf_event_update(struct perf_event *event,
- struct hw_perf_event *hwc, int idx)
+ struct hw_perf_event *hwc, int idx)
{
int shift = 64 - 32;
u64 prev_raw_count, new_raw_count;
int idx = hwc->idx;
clear_bit(idx, cpuc->active_mask);
- sparc_pmu_disable_event(hwc, idx);
+ sparc_pmu_disable_event(cpuc, hwc, idx);
barrier();
static void sparc_pmu_read(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
+
sparc_perf_event_update(event, hwc, hwc->idx);
}
static void sparc_pmu_unthrottle(struct perf_event *event)
{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
- sparc_pmu_enable_event(hwc, hwc->idx);
+
+ sparc_pmu_enable_event(cpuc, hwc, hwc->idx);
}
static atomic_t active_events = ATOMIC_INIT(0);
static DEFINE_MUTEX(pmc_grab_mutex);
+static void perf_stop_nmi_watchdog(void *unused)
+{
+ struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+
+ stop_nmi_watchdog(NULL);
+ cpuc->pcr = pcr_ops->read();
+}
+
void perf_event_grab_pmc(void)
{
if (atomic_inc_not_zero(&active_events))
mutex_lock(&pmc_grab_mutex);
if (atomic_read(&active_events) == 0) {
if (atomic_read(&nmi_active) > 0) {
- on_each_cpu(stop_nmi_watchdog, NULL, 1);
+ on_each_cpu(perf_stop_nmi_watchdog, NULL, 1);
BUG_ON(atomic_read(&nmi_active) != 0);
}
atomic_inc(&active_events);
}
}
+static const struct perf_event_map *sparc_map_cache_event(u64 config)
+{
+ unsigned int cache_type, cache_op, cache_result;
+ const struct perf_event_map *pmap;
+
+ if (!sparc_pmu->cache_map)
+ return ERR_PTR(-ENOENT);
+
+ cache_type = (config >> 0) & 0xff;
+ if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
+ return ERR_PTR(-EINVAL);
+
+ cache_op = (config >> 8) & 0xff;
+ if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
+ return ERR_PTR(-EINVAL);
+
+ cache_result = (config >> 16) & 0xff;
+ if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
+ return ERR_PTR(-EINVAL);
+
+ pmap = &((*sparc_pmu->cache_map)[cache_type][cache_op][cache_result]);
+
+ if (pmap->encoding == CACHE_OP_UNSUPPORTED)
+ return ERR_PTR(-ENOENT);
+
+ if (pmap->encoding == CACHE_OP_NONSENSE)
+ return ERR_PTR(-EINVAL);
+
+ return pmap;
+}
+
static void hw_perf_event_destroy(struct perf_event *event)
{
perf_event_release_pmc();
}
+/* Make sure all events can be scheduled into the hardware at
+ * the same time. This is simplified by the fact that we only
+ * need to support 2 simultaneous HW events.
+ */
+static int sparc_check_constraints(unsigned long *events, int n_ev)
+{
+ if (n_ev <= perf_max_events) {
+ u8 msk1, msk2;
+ u16 dummy;
+
+ if (n_ev == 1)
+ return 0;
+ BUG_ON(n_ev != 2);
+ perf_event_decode(events[0], &dummy, &msk1);
+ perf_event_decode(events[1], &dummy, &msk2);
+
+ /* If both events can go on any counter, OK. */
+ if (msk1 == (PIC_UPPER | PIC_LOWER) &&
+ msk2 == (PIC_UPPER | PIC_LOWER))
+ return 0;
+
+ /* If one event is limited to a specific counter,
+ * and the other can go on both, OK.
+ */
+ if ((msk1 == PIC_UPPER || msk1 == PIC_LOWER) &&
+ msk2 == (PIC_UPPER | PIC_LOWER))
+ return 0;
+ if ((msk2 == PIC_UPPER || msk2 == PIC_LOWER) &&
+ msk1 == (PIC_UPPER | PIC_LOWER))
+ return 0;
+
+ /* If the events are fixed to different counters, OK. */
+ if ((msk1 == PIC_UPPER && msk2 == PIC_LOWER) ||
+ (msk1 == PIC_LOWER && msk2 == PIC_UPPER))
+ return 0;
+
+ /* Otherwise, there is a conflict. */
+ }
+
+ return -1;
+}
+
+static int check_excludes(struct perf_event **evts, int n_prev, int n_new)
+{
+ int eu = 0, ek = 0, eh = 0;
+ struct perf_event *event;
+ int i, n, first;
+
+ n = n_prev + n_new;
+ if (n <= 1)
+ return 0;
+
+ first = 1;
+ for (i = 0; i < n; i++) {
+ event = evts[i];
+ if (first) {
+ eu = event->attr.exclude_user;
+ ek = event->attr.exclude_kernel;
+ eh = event->attr.exclude_hv;
+ first = 0;
+ } else if (event->attr.exclude_user != eu ||
+ event->attr.exclude_kernel != ek ||
+ event->attr.exclude_hv != eh) {
+ return -EAGAIN;
+ }
+ }
+
+ return 0;
+}
+
+static int collect_events(struct perf_event *group, int max_count,
+ struct perf_event *evts[], unsigned long *events)
+{
+ struct perf_event *event;
+ int n = 0;
+
+ if (!is_software_event(group)) {
+ if (n >= max_count)
+ return -1;
+ evts[n] = group;
+ events[n++] = group->hw.event_base;
+ }
+ list_for_each_entry(event, &group->sibling_list, group_entry) {
+ if (!is_software_event(event) &&
+ event->state != PERF_EVENT_STATE_OFF) {
+ if (n >= max_count)
+ return -1;
+ evts[n] = event;
+ events[n++] = event->hw.event_base;
+ }
+ }
+ return n;
+}
+
static int __hw_perf_event_init(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
+ struct perf_event *evts[MAX_HWEVENTS];
struct hw_perf_event *hwc = &event->hw;
+ unsigned long events[MAX_HWEVENTS];
const struct perf_event_map *pmap;
u64 enc;
+ int n;
if (atomic_read(&nmi_active) < 0)
return -ENODEV;
- if (attr->type != PERF_TYPE_HARDWARE)
+ if (attr->type == PERF_TYPE_HARDWARE) {
+ if (attr->config >= sparc_pmu->max_events)
+ return -EINVAL;
+ pmap = sparc_pmu->event_map(attr->config);
+ } else if (attr->type == PERF_TYPE_HW_CACHE) {
+ pmap = sparc_map_cache_event(attr->config);
+ if (IS_ERR(pmap))
+ return PTR_ERR(pmap);
+ } else
return -EOPNOTSUPP;
- if (attr->config >= sparc_pmu->max_events)
- return -EINVAL;
-
- perf_event_grab_pmc();
- event->destroy = hw_perf_event_destroy;
-
/* We save the enable bits in the config_base. So to
* turn off sampling just write 'config', and to enable
* things write 'config | config_base'.
if (!attr->exclude_hv)
hwc->config_base |= sparc_pmu->hv_bit;
+ hwc->event_base = perf_event_encode(pmap);
+
+ enc = pmap->encoding;
+
+ n = 0;
+ if (event->group_leader != event) {
+ n = collect_events(event->group_leader,
+ perf_max_events - 1,
+ evts, events);
+ if (n < 0)
+ return -EINVAL;
+ }
+ events[n] = hwc->event_base;
+ evts[n] = event;
+
+ if (check_excludes(evts, n, 1))
+ return -EINVAL;
+
+ if (sparc_check_constraints(events, n + 1))
+ return -EINVAL;
+
+ /* Try to do all error checking before this point, as unwinding
+ * state after grabbing the PMC is difficult.
+ */
+ perf_event_grab_pmc();
+ event->destroy = hw_perf_event_destroy;
+
if (!hwc->sample_period) {
hwc->sample_period = MAX_PERIOD;
hwc->last_period = hwc->sample_period;
atomic64_set(&hwc->period_left, hwc->sample_period);
}
- pmap = sparc_pmu->event_map(attr->config);
-
- enc = pmap->encoding;
if (pmap->pic_mask & PIC_UPPER) {
hwc->idx = PIC_UPPER_INDEX;
enc <<= sparc_pmu->upper_shift;
}
static int __kprobes perf_event_nmi_handler(struct notifier_block *self,
- unsigned long cmd, void *__args)
+ unsigned long cmd, void *__args)
{
struct die_args *args = __args;
struct perf_sample_data data;
continue;
if (perf_event_overflow(event, 1, &data, regs))
- sparc_pmu_disable_event(hwc, idx);
+ sparc_pmu_disable_event(cpuc, hwc, idx);
}
return NOTIFY_STOP;
static bool __init supported_pmu(void)
{
- if (!strcmp(sparc_pmu_type, "ultra3i")) {
- sparc_pmu = &ultra3i_pmu;
+ if (!strcmp(sparc_pmu_type, "ultra3") ||
+ !strcmp(sparc_pmu_type, "ultra3+") ||
+ !strcmp(sparc_pmu_type, "ultra3i") ||
+ !strcmp(sparc_pmu_type, "ultra4+")) {
+ sparc_pmu = &ultra3_pmu;
+ return true;
+ }
+ if (!strcmp(sparc_pmu_type, "niagara")) {
+ sparc_pmu = &niagara1_pmu;
return true;
}
if (!strcmp(sparc_pmu_type, "niagara2")) {
free_bootmem(__pa(ptr), size);
}
-static int pcpu_cpu_distance(unsigned int from, unsigned int to)
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
{
if (cpu_to_node(from) == cpu_to_node(to))
return LOCAL_DISTANCE;
return REMOTE_DISTANCE;
}
+static void __init pcpu_populate_pte(unsigned long addr)
+{
+ pgd_t *pgd = pgd_offset_k(addr);
+ pud_t *pud;
+ pmd_t *pmd;
+
+ pud = pud_offset(pgd, addr);
+ if (pud_none(*pud)) {
+ pmd_t *new;
+
+ new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+ pud_populate(&init_mm, pud, new);
+ }
+
+ pmd = pmd_offset(pud, addr);
+ if (!pmd_present(*pmd)) {
+ pte_t *new;
+
+ new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+ pmd_populate_kernel(&init_mm, pmd, new);
+ }
+}
+
void __init setup_per_cpu_areas(void)
{
unsigned long delta;
unsigned int cpu;
- int rc;
-
- rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
- PERCPU_DYNAMIC_RESERVE, 4 << 20,
- pcpu_cpu_distance, pcpu_alloc_bootmem,
- pcpu_free_bootmem);
- if (rc)
- panic("failed to initialize first chunk (%d)", rc);
+ int rc = -EINVAL;
+
+ if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+ rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+ PERCPU_DYNAMIC_RESERVE, 4 << 20,
+ pcpu_cpu_distance,
+ pcpu_alloc_bootmem,
+ pcpu_free_bootmem);
+ if (rc)
+ pr_warning("PERCPU: %s allocator failed (%d), "
+ "falling back to page size\n",
+ pcpu_fc_names[pcpu_chosen_fc], rc);
+ }
+ if (rc < 0)
+ rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE,
+ pcpu_alloc_bootmem,
+ pcpu_free_bootmem,
+ pcpu_populate_pte);
+ if (rc < 0)
+ panic("cannot initialize percpu area (err=%d)", rc);
delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
for_each_possible_cpu(cpu)
#include <linux/signal.h>
#include <linux/resource.h>
#include <linux/times.h>
-#include <linux/utsname.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/sem.h>
#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/utsname.h>
#include <asm/utrap.h>
#include <asm/signal.h>
+struct new_utsname;
+
extern asmlinkage unsigned long sys_getpagesize(void);
extern asmlinkage unsigned long sparc_brk(unsigned long brk);
extern asmlinkage long sparc_pipe(struct pt_regs *regs);
struct page *page;
page = pfn_to_page(pfn);
- if (page && page_mapping(page)) {
+ if (page) {
unsigned long pg_flags;
pg_flags = page->flags;
#include <linux/oprofile.h>
#include <linux/errno.h>
#include <linux/init.h>
+#include <linux/param.h> /* for HZ */
#ifdef CONFIG_SPARC64
#include <linux/notifier.h>
$(call cc-option, -fno-stack-protector,) \
$(call cc-option, -fno-stack-protector-all,)
-CONFIG_KERNEL_STACK_ORDER ?= 2
-STACK_SIZE := $(shell echo $$[ 4096 * (1 << $(CONFIG_KERNEL_STACK_ORDER)) ] )
-
-CPPFLAGS_vmlinux.lds = -U$(SUBARCH) -DSTART=$(START) -DELF_ARCH=$(ELF_ARCH) \
- -DELF_FORMAT="$(ELF_FORMAT)" -DKERNEL_STACK_SIZE=$(STACK_SIZE)
+# Options used by linker script
+export LDS_START := $(START)
+export LDS_ELF_ARCH := $(ELF_ARCH)
+export LDS_ELF_FORMAT := $(ELF_FORMAT)
# The wrappers will select whether using "malloc" or the kernel allocator.
LINK_WRAPS = -Wl,--wrap,malloc -Wl,--wrap,free -Wl,--wrap,calloc
#include "linux/irqreturn.h"
#include "linux/kd.h"
+#include "linux/sched.h"
#include "chan_kern.h"
#include "irq_kern.h"
#include "irq_user.h"
#include "linux/interrupt.h"
#include "linux/list.h"
#include "linux/mutex.h"
+#include "linux/workqueue.h"
#include "asm/atomic.h"
#include "init.h"
#include "irq_kern.h"
. = ALIGN(4096);
.note : { *(.note.*) }
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
+ EXCEPTION_TABLE(0)
BUG_TABLE
}
.init.setup : {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
+ INIT_SETUP(0)
}
- . = ALIGN(32);
- .data.percpu : {
- __per_cpu_start = . ;
- *(.data.percpu)
- __per_cpu_end = . ;
- }
+ PERCPU(32)
.initcall.init : {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
+ INIT_CALLS
}
.con_initcall.init : {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
+ CON_INITCALL
}
.uml.initcall.init : {
. = ALIGN(4096);
.init.ramfs : {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
+ INIT_RAM_FS
}
unsigned cpu = smp_processor_id();
if(prev != next){
- cpu_clear(cpu, prev->cpu_vm_mask);
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
+ cpumask_set_cpu(cpu, mm_cpumask(next));
if(next != &init_mm)
__switch_mm(&next->context.id);
}
# Licensed under the GPL
#
+CPPFLAGS_vmlinux.lds := -U$(SUBARCH) -DSTART=$(LDS_START) \
+ -DELF_ARCH=$(LDS_ELF_ARCH) \
+ -DELF_FORMAT=$(LDS_ELF_FORMAT)
extra-y := vmlinux.lds
clean-files :=
_text = .;
_stext = .;
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
.init_array : { *(.init_array) }
.fini_array : { *(.fini_array) }
.data : {
- . = ALIGN(KERNEL_STACK_SIZE); /* init_task */
- *(.data.init_task)
+ INIT_TASK_DATA(KERNEL_STACK_SIZE)
. = ALIGN(KERNEL_STACK_SIZE);
*(.data.init_irqstack)
DATA_DATA
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
union thread_union cpu0_irqstack
__attribute__((__section__(".data.init_irqstack"))) =
#include "linux/interrupt.h"
#include "linux/kernel_stat.h"
#include "linux/module.h"
+#include "linux/sched.h"
#include "linux/seq_file.h"
#include "as-layout.h"
#include "kern_util.h"
int i;
for (i = 0; i < ncpus; ++i)
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
cpu_clear(me, cpu_online_map);
cpu_set(me, cpu_online_map);
_text = .;
_stext = .;
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
. = ALIGN(PAGE_SIZE);
.text :
init.data : { INIT_DATA }
.data :
{
- . = ALIGN(KERNEL_STACK_SIZE); /* init_task */
- *(.data.init_task)
+ INIT_TASK_DATA(KERNEL_STACK_SIZE)
. = ALIGN(KERNEL_STACK_SIZE);
*(.data.init_irqstack)
DATA_DATA
_edata = .;
PROVIDE (edata = .);
. = ALIGN(PAGE_SIZE);
- .sbss :
- {
- __bss_start = .;
- PROVIDE(_bss_start = .);
- *(.sbss)
- *(.scommon)
- }
- .bss :
- {
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
+ __bss_start = .;
+ PROVIDE(_bss_start = .);
+ SBSS(0)
+ BSS(0)
_end = .;
PROVIDE (end = .);
+
+KERNEL_STACK_SIZE = 4096 * (1 << CONFIG_KERNEL_STACK_ORDER);
+
#ifdef CONFIG_LD_SCRIPT_STATIC
#include "uml.lds.S"
#else
config HAVE_LATENCYTOP_SUPPORT
def_bool y
-config FAST_CMPXCHG_LOCAL
- bool
- default y
-
config MMU
def_bool y
of Flat Logical. You will need a new lynxer.elf file to flash your
firmware with - send email to <Martin.Bligh@us.ibm.com>.
+config X86_SUPPORTS_MEMORY_FAILURE
+ bool
+ # MCE code calls memory_failure():
+ depends on X86_MCE
+ # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
+ depends on !X86_NUMAQ
+ # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
+ depends on X86_64 || !SPARSEMEM
+ select ARCH_SUPPORTS_MEMORY_FAILURE
+ default y
+
config X86_VISWS
bool "SGI 320/540 (Visual Workstation)"
depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
source "arch/x86/xen/Kconfig"
config VMI
- bool "VMI Guest support"
+ bool "VMI Guest support (DEPRECATED)"
select PARAVIRT
depends on X86_32
---help---
at the moment), by linking the kernel to a GPL-ed ROM module
provided by the hypervisor.
+ As of September 2009, VMware has started a phased retirement
+ of this feature from VMware's products. Please see
+ feature-removal-schedule.txt for details. If you are
+ planning to enable this option, please note that you cannot
+ live migrate a VMI enabled VM to a future VMware product,
+ which doesn't support VMI. So if you expect your kernel to
+ seamlessly migrate to newer VMware products, keep this
+ disabled.
+
config KVM_CLOCK
bool "KVM paravirtualized clock"
select PARAVIRT
If unsure, say Y. Only embedded should say N here.
-config CC_STACKPROTECTOR_ALL
- bool
-
config CC_STACKPROTECTOR
bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
- select CC_STACKPROTECTOR_ALL
---help---
This option turns on the -fstack-protector GCC feature. This
feature puts, at the beginning of functions, a canary value on
config X86_CMPXCHG64
def_bool y
- depends on X86_PAE || X86_64
+ depends on !M386 && !M486
# this should be set for all -march=.. options where the compiler
# generates cmov.
int
default "64" if X86_64
default "6" if X86_32 && X86_P6_NOP
+ default "5" if X86_32 && X86_CMPXCHG64
default "4" if X86_32 && (X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK)
default "3"
cc_has_sp := $(srctree)/scripts/gcc-x86_$(BITS)-has-stack-protector.sh
ifeq ($(shell $(CONFIG_SHELL) $(cc_has_sp) $(CC) $(biarch)),y)
stackp-y := -fstack-protector
- stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += -fstack-protector-all
KBUILD_CFLAGS += $(stackp-y)
else
$(warning stack protector enabled but no compiler support)
define archhelp
echo '* bzImage - Compressed kernel image (arch/x86/boot/bzImage)'
echo ' install - Install kernel using'
- echo ' (your) ~/bin/installkernel or'
- echo ' (distribution) /sbin/installkernel or'
+ echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
echo ' install to $$(INSTALL_PATH) and run lilo'
echo ' fdimage - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
echo ' fdimage144 - Create 1.4MB boot floppy image (arch/x86/boot/fdimage)'
*/
.text
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page_types.h>
#include <asm/boot.h>
#include <asm/asm-offsets.h>
- .section ".text.head","ax",@progbits
+ __HEAD
ENTRY(startup_32)
cld
/*
.code32
.text
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/pgtable_types.h>
#include <asm/processor-flags.h>
#include <asm/asm-offsets.h>
- .section ".text.head"
+ __HEAD
.code32
ENTRY(startup_32)
cld
+#include <asm-generic/vmlinux.lds.h>
+
OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
#undef i386
* address 0.
*/
. = 0;
- .text.head : {
+ .head.text : {
_head = . ;
- *(.text.head)
+ HEAD_TEXT
_ehead = . ;
}
.rodata.compressed : {
# User may have a custom install script
-if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi
-if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
# Default install - same as make zlilo
/DISCARD/ : { *(.note*) }
+ /*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT(_end <= 0x8000, "Setup too big!");
. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
/* Necessary for the very-old-loader check to work... */
return -EINVAL;
}
- if (irq_fpu_usable())
+ if (!irq_fpu_usable())
err = crypto_aes_expand_key(ctx, in_key, key_len);
else {
kernel_fpu_begin();
{
struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
- if (irq_fpu_usable())
+ if (!irq_fpu_usable())
crypto_aes_encrypt_x86(ctx, dst, src);
else {
kernel_fpu_begin();
{
struct crypto_aes_ctx *ctx = aes_ctx(crypto_tfm_ctx(tfm));
- if (irq_fpu_usable())
+ if (!irq_fpu_usable())
crypto_aes_decrypt_x86(ctx, dst, src);
else {
kernel_fpu_begin();
struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- if (irq_fpu_usable()) {
+ if (!irq_fpu_usable()) {
struct ablkcipher_request *cryptd_req =
ablkcipher_request_ctx(req);
memcpy(cryptd_req, req, sizeof(*req));
struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(req);
struct async_aes_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- if (irq_fpu_usable()) {
+ if (!irq_fpu_usable()) {
struct ablkcipher_request *cryptd_req =
ablkcipher_request_ctx(req);
memcpy(cryptd_req, req, sizeof(*req));
#define __AUDIT_ARCH_LE 0x40000000
#ifndef CONFIG_AUDITSYSCALL
-#define sysexit_audit int_ret_from_sys_call
-#define sysretl_audit int_ret_from_sys_call
+#define sysexit_audit ia32_ret_from_sys_call
+#define sysretl_audit ia32_ret_from_sys_call
#endif
#define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
.endm
/* clobbers %eax */
- .macro CLEAR_RREGS _r9=rax
+ .macro CLEAR_RREGS offset=0, _r9=rax
xorl %eax,%eax
- movq %rax,R11(%rsp)
- movq %rax,R10(%rsp)
- movq %\_r9,R9(%rsp)
- movq %rax,R8(%rsp)
+ movq %rax,\offset+R11(%rsp)
+ movq %rax,\offset+R10(%rsp)
+ movq %\_r9,\offset+R9(%rsp)
+ movq %rax,\offset+R8(%rsp)
.endm
/*
movl RIP-R11(%rsp),%edx /* User %eip */
CFI_REGISTER rip,rdx
RESTORE_ARGS 1,24,1,1,1,1
+ xorq %r8,%r8
+ xorq %r9,%r9
+ xorq %r10,%r10
+ xorq %r11,%r11
popfq
CFI_ADJUST_CFA_OFFSET -8
/*CFI_RESTORE rflags*/
movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */
.endm
- .macro auditsys_exit exit,ebpsave=RBP
+ .macro auditsys_exit exit
testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
- jnz int_ret_from_sys_call
+ jnz ia32_ret_from_sys_call
TRACE_IRQS_ON
sti
movl %eax,%esi /* second arg, syscall return value */
call audit_syscall_exit
GET_THREAD_INFO(%r10)
movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */
- movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
cli
TRACE_IRQS_OFF
testl %edi,TI_flags(%r10)
- jnz int_with_check
- jmp \exit
+ jz \exit
+ CLEAR_RREGS -ARGOFFSET
+ jmp int_with_check
.endm
sysenter_auditsys:
CFI_REGISTER rip,rcx
movl EFLAGS-ARGOFFSET(%rsp),%r11d
/*CFI_REGISTER rflags,r11*/
+ xorq %r10,%r10
+ xorq %r9,%r9
+ xorq %r8,%r8
TRACE_IRQS_ON
movl RSP-ARGOFFSET(%rsp),%esp
CFI_RESTORE rsp
jmp cstar_dispatch
sysretl_audit:
- auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */
+ auditsys_exit sysretl_from_sys_call
#endif
cstar_tracesys:
#endif
xchgl %r9d,%ebp
SAVE_REST
- CLEAR_RREGS r9
+ CLEAR_RREGS 0, r9
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
ia32_sysret:
movq %rax,RAX-ARGOFFSET(%rsp)
+ia32_ret_from_sys_call:
+ CLEAR_RREGS -ARGOFFSET
jmp int_ret_from_sys_call
ia32_tracesys:
ia32_badsys:
movq $0,ORIG_RAX-ARGOFFSET(%rsp)
- movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
- jmp int_ret_from_sys_call
+ movq $-ENOSYS,%rax
+ jmp ia32_sysret
quiet_ni_syscall:
movq $-ENOSYS,%rax
extern void amd_iommu_flush_all_domains(void);
extern void amd_iommu_flush_all_devices(void);
extern void amd_iommu_shutdown(void);
+extern void amd_iommu_apply_erratum_63(u16 devid);
#else
static inline int amd_iommu_init(void) { return -ENODEV; }
static inline void amd_iommu_detect(void) { }
#ifndef _ASM_X86_CACHE_H
#define _ASM_X86_CACHE_H
+#include <linux/linkage.h>
+
/* L1 cache line size */
#define L1_CACHE_SHIFT (CONFIG_X86_L1_CACHE_SHIFT)
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
#ifdef CONFIG_SMP
#define __cacheline_aligned_in_smp \
__attribute__((__aligned__(1 << (INTERNODE_CACHE_SHIFT)))) \
- __attribute__((__section__(".data.page_aligned")))
+ __page_aligned_data
#endif
#endif
"adcl $0, %0 ;\n"
: "=&r" (sum)
: "r" (saddr), "r" (daddr),
- "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+ "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+ : "memory");
return csum_fold(sum);
}
extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
-#define cmpxchg64(ptr, o, n) \
-({ \
- __typeof__(*(ptr)) __ret; \
- if (likely(boot_cpu_data.x86 > 4)) \
- __ret = (__typeof__(*(ptr)))__cmpxchg64((ptr), \
- (unsigned long long)(o), \
- (unsigned long long)(n)); \
- else \
- __ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr), \
- (unsigned long long)(o), \
- (unsigned long long)(n)); \
- __ret; \
-})
+#define cmpxchg64(ptr, o, n) \
+({ \
+ __typeof__(*(ptr)) __ret; \
+ __typeof__(*(ptr)) __old = (o); \
+ __typeof__(*(ptr)) __new = (n); \
+ alternative_io("call cmpxchg8b_emu", \
+ "lock; cmpxchg8b (%%esi)" , \
+ X86_FEATURE_CX8, \
+ "=A" (__ret), \
+ "S" ((ptr)), "0" (__old), \
+ "b" ((unsigned int)__new), \
+ "c" ((unsigned int)(__new>>32)) \
+ : "memory"); \
+ __ret; })
+
+
+
#define cmpxchg64_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) __ret; \
static inline unsigned long get_desc_base(const struct desc_struct *desc)
{
- return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
+ return (unsigned)(desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24));
}
static inline void set_desc_base(struct desc_struct *desc, unsigned long base)
#define KVM_ARCH_WANT_MMU_NOTIFIER
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva);
int kvm_age_hva(struct kvm *kvm, unsigned long hva);
+void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte);
int cpuid_maxphyaddr(struct kvm_vcpu *vcpu);
int kvm_cpu_has_interrupt(struct kvm_vcpu *vcpu);
int kvm_arch_interrupt_allowed(struct kvm_vcpu *vcpu);
static inline void enable_p5_mce(void) {}
#endif
+extern void (*x86_mce_decode_callback)(struct mce *m);
+
void mce_setup(struct mce *m);
void mce_log(struct mce *m);
DECLARE_PER_CPU(struct sys_device, mce_dev);
if (likely(prev != next)) {
/* stop flush ipis for the previous mm */
- cpu_clear(cpu, prev->cpu_vm_mask);
+ cpumask_clear_cpu(cpu, mm_cpumask(prev));
#ifdef CONFIG_SMP
percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
percpu_write(cpu_tlbstate.active_mm, next);
#endif
- cpu_set(cpu, next->cpu_vm_mask);
+ cpumask_set_cpu(cpu, mm_cpumask(next));
/* Re-load page tables */
load_cr3(next->pgd);
percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next);
- if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) {
+ if (!cpumask_test_and_set_cpu(cpu, mm_cpumask(next))) {
/* We were in lazy tlb mode and leave_mm disabled
* tlb flush IPI delivery. We must reload CR3
* to make sure to use no freed page tables.
#define NMI_INVALID 3
struct ctl_table;
-struct file;
-extern int proc_nmi_enabled(struct ctl_table *, int , struct file *,
+extern int proc_nmi_enabled(struct ctl_table *, int ,
void __user *, size_t *, loff_t *);
extern int unknown_nmi_panic;
static inline unsigned long __raw_local_save_flags(void)
{
- unsigned long f;
-
- asm volatile(paravirt_alt(PARAVIRT_CALL)
- : "=a"(f)
- : paravirt_type(pv_irq_ops.save_fl),
- paravirt_clobber(CLBR_EAX)
- : "memory", "cc");
- return f;
+ return PVOP_CALLEE0(unsigned long, pv_irq_ops.save_fl);
}
static inline void raw_local_irq_restore(unsigned long f)
{
- asm volatile(paravirt_alt(PARAVIRT_CALL)
- : "=a"(f)
- : PV_FLAGS_ARG(f),
- paravirt_type(pv_irq_ops.restore_fl),
- paravirt_clobber(CLBR_EAX)
- : "memory", "cc");
+ PVOP_VCALLEE1(pv_irq_ops.restore_fl, f);
}
static inline void raw_local_irq_disable(void)
{
- asm volatile(paravirt_alt(PARAVIRT_CALL)
- :
- : paravirt_type(pv_irq_ops.irq_disable),
- paravirt_clobber(CLBR_EAX)
- : "memory", "eax", "cc");
+ PVOP_VCALLEE0(pv_irq_ops.irq_disable);
}
static inline void raw_local_irq_enable(void)
{
- asm volatile(paravirt_alt(PARAVIRT_CALL)
- :
- : paravirt_type(pv_irq_ops.irq_enable),
- paravirt_clobber(CLBR_EAX)
- : "memory", "eax", "cc");
+ PVOP_VCALLEE0(pv_irq_ops.irq_enable);
}
static inline unsigned long __raw_local_irq_save(void)
#define EXTRA_CLOBBERS
#define VEXTRA_CLOBBERS
#else /* CONFIG_X86_64 */
+/* [re]ax isn't an arg, but the return val */
#define PVOP_VCALL_ARGS \
unsigned long __edi = __edi, __esi = __esi, \
- __edx = __edx, __ecx = __ecx
-#define PVOP_CALL_ARGS PVOP_VCALL_ARGS, __eax
+ __edx = __edx, __ecx = __ecx, __eax = __eax
+#define PVOP_CALL_ARGS PVOP_VCALL_ARGS
#define PVOP_CALL_ARG1(x) "D" ((unsigned long)(x))
#define PVOP_CALL_ARG2(x) "S" ((unsigned long)(x))
"=c" (__ecx)
#define PVOP_CALL_CLOBBERS PVOP_VCALL_CLOBBERS, "=a" (__eax)
+/* void functions are still allowed [re]ax for scratch */
#define PVOP_VCALLEE_CLOBBERS "=a" (__eax)
#define PVOP_CALLEE_CLOBBERS PVOP_VCALLEE_CLOBBERS
VEXTRA_CLOBBERS, \
pre, post, ##__VA_ARGS__)
-#define __PVOP_VCALLEESAVE(rettype, op, pre, post, ...) \
- ____PVOP_CALL(rettype, op.func, CLBR_RET_REG, \
+#define __PVOP_VCALLEESAVE(op, pre, post, ...) \
+ ____PVOP_VCALL(op.func, CLBR_RET_REG, \
PVOP_VCALLEE_CLOBBERS, , \
pre, post, ##__VA_ARGS__)
static inline const struct cpumask *
cpumask_of_pcibus(const struct pci_bus *bus)
{
- return cpumask_of_node(__pcibus_to_node(bus));
+ int node;
+
+ node = __pcibus_to_node(bus);
+ return (node == -1) ? cpu_online_mask :
+ cpumask_of_node(node);
}
#endif
typedef struct page *pgtable_t;
extern pteval_t __supported_pte_mask;
+extern void set_nx(void);
extern int nx_enabled;
#define pgprot_writecombine pgprot_writecombine
#define thread_saved_pc(t) (*(unsigned long *)((t)->thread.sp - 8))
#define task_pt_regs(tsk) ((struct pt_regs *)(tsk)->thread.sp0 - 1)
-#define KSTK_ESP(tsk) -1 /* sorry. doesn't work for syscall. */
+extern unsigned long KSTK_ESP(struct task_struct *task);
#endif /* CONFIG_X86_64 */
extern void start_thread(struct pt_regs *regs, unsigned long new_ip,
smp_ops.send_call_func_single_ipi(cpu);
}
-#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
smp_ops.send_call_func_ipi(mask);
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_POWERSAVINGS_BALANCE \
| 0*SD_SHARE_PKG_RESOURCES \
return 0;
}
-static inline int cpu_to_node(int cpu)
-{
- return 0;
-}
-
static inline int early_cpu_to_node(int cpu)
{
return 0;
}
-static inline const struct cpumask *cpumask_of_node(int node)
-{
- return cpu_online_mask;
-}
-
static inline void setup_node_to_cpumask_map(void) { }
#endif
#include <asm/types.h>
#include <asm/percpu.h>
#include <asm/uv/uv_mmrs.h>
+#include <asm/irq_vectors.h>
+#include <asm/io_apic.h>
/*
/*
* The largest possible NASID of a C or M brick (+ 2)
*/
-#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2)
+#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_BLADES * 2)
struct uv_scir_s {
struct timer_list timer;
return uv_soc_phys_ram_to_gpa(__pa(v));
}
+/* gnode -> pnode */
+static inline unsigned long uv_gpa_to_gnode(unsigned long gpa)
+{
+ return gpa >> uv_hub_info->m_val;
+}
+
+/* gpa -> pnode */
+static inline int uv_gpa_to_pnode(unsigned long gpa)
+{
+ unsigned long n_mask = (1UL << uv_hub_info->n_val) - 1;
+
+ return uv_gpa_to_gnode(gpa) & n_mask;
+}
+
/* pnode, offset --> socket virtual */
static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
{
static inline void uv_hub_send_ipi(int pnode, int apicid, int vector)
{
unsigned long val;
+ unsigned long dmode = dest_Fixed;
+
+ if (vector == NMI_VECTOR)
+ dmode = dest_NMI;
val = (1UL << UVH_IPI_INT_SEND_SHFT) |
((apicid) << UVH_IPI_INT_APIC_ID_SHFT) |
+ (dmode << UVH_IPI_INT_DELIVERY_MODE_SHFT) |
(vector << UVH_IPI_INT_VECTOR_SHFT);
uv_write_global_mmr64(pnode, UVH_IPI_INT, val);
}
* P4, Core and beyond CPUs
*/
if (c->x86_vendor == X86_VENDOR_INTEL &&
- (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+ (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 14)))
flags->bm_control = 0;
}
EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
*(.note*)
}
+ /*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!");
}
amd_iommu_dev_table[devid].data[1] = 0;
amd_iommu_dev_table[devid].data[2] = 0;
+ amd_iommu_apply_erratum_63(devid);
+
/* decrease reference counter */
domain->dev_cnt -= 1;
writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
}
-static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
+static void iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
{
u32 ctrl;
amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
}
+static int get_dev_entry_bit(u16 devid, u8 bit)
+{
+ int i = (bit >> 5) & 0x07;
+ int _bit = bit & 0x1f;
+
+ return (amd_iommu_dev_table[devid].data[i] & (1 << _bit)) >> _bit;
+}
+
+
+void amd_iommu_apply_erratum_63(u16 devid)
+{
+ int sysmgt;
+
+ sysmgt = get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1) |
+ (get_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2) << 1);
+
+ if (sysmgt == 0x01)
+ set_dev_entry_bit(devid, DEV_ENTRY_IW);
+}
+
/* Writes the specific IOMMU for a device into the rlookup table */
static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
{
if (flags & ACPI_DEVFLAG_LINT1)
set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
+ amd_iommu_apply_erratum_63(devid);
+
set_iommu_for_device(iommu, devid);
}
cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
if (cfg) {
- if (!alloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
+ if (!zalloc_cpumask_var_node(&cfg->domain, GFP_ATOMIC, node)) {
kfree(cfg);
cfg = NULL;
- } else if (!alloc_cpumask_var_node(&cfg->old_domain,
+ } else if (!zalloc_cpumask_var_node(&cfg->old_domain,
GFP_ATOMIC, node)) {
free_cpumask_var(cfg->domain);
kfree(cfg);
cfg = NULL;
- } else {
- cpumask_clear(cfg->domain);
- cpumask_clear(cfg->old_domain);
}
}
/*
* proc handler for /proc/sys/kernel/nmi
*/
-int proc_nmi_enabled(struct ctl_table *table, int write, struct file *file,
+int proc_nmi_enabled(struct ctl_table *table, int write,
void __user *buffer, size_t *length, loff_t *ppos)
{
int old_state;
nmi_watchdog_enabled = (atomic_read(&nmi_active) > 0) ? 1 : 0;
old_state = nmi_watchdog_enabled;
- proc_dointvec(table, write, file, buffer, length, ppos);
+ proc_dointvec(table, write, buffer, length, ppos);
if (!!old_state == !!nmi_watchdog_enabled)
return 0;
for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
alias.v = uv_read_local_mmr(redir_addrs[i].alias);
- if (alias.s.base == 0) {
+ if (alias.s.enable && alias.s.base == 0) {
*size = (1UL << alias.s.m_alias);
redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
*base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
return;
}
}
- BUG();
+ *base = *size = 0;
}
enum map_type {map_wb, map_uc};
uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
uv_cpu_hub_info(cpu)->lowmem_remap_top = lowmem_redir_size;
uv_cpu_hub_info(cpu)->m_val = m_val;
- uv_cpu_hub_info(cpu)->n_val = m_val;
+ uv_cpu_hub_info(cpu)->n_val = n_val;
uv_cpu_hub_info(cpu)->numa_blade_id = blade;
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_cpu_hub_info(cpu)->pnode = pnode;
uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
- uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+ uv_cpu_hub_info(cpu)->gpa_mask = (1UL << (m_val + n_val)) - 1;
uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
};
/* Inject mce on current CPU */
-static int raise_local(struct mce *m)
+static int raise_local(void)
{
+ struct mce *m = &__get_cpu_var(injectm);
int context = MCJ_CTX(m->inject_flags);
int ret = 0;
int cpu = m->extcpu;
}
cpu_relax();
}
- raise_local(m);
+ raise_local();
put_cpu();
put_online_cpus();
} else
#endif
- raise_local(m);
+ raise_local();
}
/* Error injection interface */
static DEFINE_PER_CPU(struct mce, mces_seen);
static int cpu_missing;
+static void default_decode_mce(struct mce *m)
+{
+ pr_emerg("No human readable MCE decoding support on this CPU type.\n");
+ pr_emerg("Run the message through 'mcelog --ascii' to decode.\n");
+}
+
+/*
+ * CPU/chipset specific EDAC code can register a callback here to print
+ * MCE errors in a human-readable form:
+ */
+void (*x86_mce_decode_callback)(struct mce *m) = default_decode_mce;
+EXPORT_SYMBOL(x86_mce_decode_callback);
/* MCA banks polled by the period polling timer for corrected events */
DEFINE_PER_CPU(mce_banks_t, mce_poll_banks) = {
set_bit(0, &mce_need_notify);
}
-void __weak decode_mce(struct mce *m)
-{
- return;
-}
-
static void print_mce(struct mce *m)
{
- printk(KERN_EMERG
- "CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
+ pr_emerg("CPU %d: Machine Check Exception: %16Lx Bank %d: %016Lx\n",
m->extcpu, m->mcgstatus, m->bank, m->status);
+
if (m->ip) {
- printk(KERN_EMERG "RIP%s %02x:<%016Lx> ",
- !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
- m->cs, m->ip);
+ pr_emerg("RIP%s %02x:<%016Lx> ",
+ !(m->mcgstatus & MCG_STATUS_EIPV) ? " !INEXACT!" : "",
+ m->cs, m->ip);
+
if (m->cs == __KERNEL_CS)
print_symbol("{%s}", m->ip);
- printk(KERN_CONT "\n");
+ pr_cont("\n");
}
- printk(KERN_EMERG "TSC %llx ", m->tsc);
+
+ pr_emerg("TSC %llx ", m->tsc);
if (m->addr)
- printk(KERN_CONT "ADDR %llx ", m->addr);
+ pr_cont("ADDR %llx ", m->addr);
if (m->misc)
- printk(KERN_CONT "MISC %llx ", m->misc);
- printk(KERN_CONT "\n");
- printk(KERN_EMERG "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
- m->cpuvendor, m->cpuid, m->time, m->socketid,
- m->apicid);
+ pr_cont("MISC %llx ", m->misc);
- decode_mce(m);
+ pr_cont("\n");
+ pr_emerg("PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x\n",
+ m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid);
+
+ /*
+ * Print out human-readable details about the MCE error,
+ * (if the CPU has an implementation for that):
+ */
+ x86_mce_decode_callback(m);
}
static void print_mce_head(void)
{
- printk(KERN_EMERG "\nHARDWARE ERROR\n");
+ pr_emerg("\nHARDWARE ERROR\n");
}
static void print_mce_tail(void)
{
- printk(KERN_EMERG "This is not a software problem!\n"
-#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
- "Run through mcelog --ascii to decode and contact your hardware vendor\n"
-#endif
- );
+ pr_emerg("This is not a software problem!\n");
}
#define PANIC_TIMEOUT 5 /* 5 seconds */
static void wait_for_panic(void)
{
long timeout = PANIC_TIMEOUT*USEC_PER_SEC;
+
preempt_disable();
local_irq_enable();
while (timeout-- > 0)
static int msr_to_offset(u32 msr)
{
unsigned bank = __get_cpu_var(injectm.bank);
+
if (msr == rip_msr)
return offsetof(struct mce, ip);
if (msr == MSR_IA32_MCx_STATUS(bank))
static u64 mce_rdmsrl(u32 msr)
{
u64 v;
+
if (__get_cpu_var(injectm).finished) {
int offset = msr_to_offset(msr);
+
if (offset < 0)
return 0;
return *(u64 *)((char *)&__get_cpu_var(injectm) + offset);
}
- rdmsrl(msr, v);
+
+ if (rdmsrl_safe(msr, &v)) {
+ WARN_ONCE(1, "mce: Unable to read msr %d!\n", msr);
+ /*
+ * Return zero in case the access faulted. This should
+ * not happen normally but can happen if the CPU does
+ * something weird, or if the code is buggy.
+ */
+ v = 0;
+ }
+
return v;
}
{
if (__get_cpu_var(injectm).finished) {
int offset = msr_to_offset(msr);
+
if (offset >= 0)
*(u64 *)((char *)&__get_cpu_var(injectm) + offset) = v;
return;
m->ip = mce_rdmsrl(rip_msr);
}
-#ifdef CONFIG_X86_LOCAL_APIC
+#ifdef CONFIG_X86_LOCAL_APIC
/*
* Called after interrupts have been reenabled again
* when a MCE happened during an interrupts off region
return -ENOMEM;
for (i = 0; i < banks; i++) {
struct mce_bank *b = &mce_banks[i];
+
b->ctl = -1ULL;
b->init = 1;
}
rdmsrl(MSR_IA32_MCG_CAP, cap);
b = cap & MCG_BANKCNT_MASK;
- printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
+ if (!banks)
+ printk(KERN_INFO "mce: CPU supports %d MCE banks\n", b);
if (b > MAX_NR_BANKS) {
printk(KERN_WARNING
banks = b;
if (!mce_banks) {
int err = mce_banks_init();
+
if (err)
return err;
}
for (i = 0; i < banks; i++) {
struct mce_bank *b = &mce_banks[i];
+
if (!b->init)
continue;
wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
for (i = 0; i < banks; i++) {
struct mce_bank *b = &mce_banks[i];
+
if (b->init)
wrmsrl(MSR_IA32_MCx_CTL(i), 0);
}
cmci_clear();
for (i = 0; i < banks; i++) {
struct mce_bank *b = &mce_banks[i];
+
if (b->init)
wrmsrl(MSR_IA32_MCx_CTL(i), 0);
}
cmci_reenable();
for (i = 0; i < banks; i++) {
struct mce_bank *b = &mce_banks[i];
+
if (b->init)
wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
}
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
+#include <linux/sched.h>
#include <asm/apic.h>
#include <asm/processor.h>
#include <asm/msr.h>
/* How long to wait between reporting thermal events */
#define CHECK_INTERVAL (300 * HZ)
-static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
-static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
-static DEFINE_PER_CPU(bool, thermal_throttle_active);
+/*
+ * Current thermal throttling state:
+ */
+struct thermal_state {
+ bool is_throttled;
+
+ u64 next_check;
+ unsigned long throttle_count;
+ unsigned long last_throttle_count;
+};
+
+static DEFINE_PER_CPU(struct thermal_state, thermal_state);
-static atomic_t therm_throt_en = ATOMIC_INIT(0);
+static atomic_t therm_throt_en = ATOMIC_INIT(0);
#ifdef CONFIG_SYSFS
#define define_therm_throt_sysdev_one_ro(_name) \
static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
#define define_therm_throt_sysdev_show_func(name) \
-static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev, \
- struct sysdev_attribute *attr, \
- char *buf) \
+ \
+static ssize_t therm_throt_sysdev_show_##name( \
+ struct sys_device *dev, \
+ struct sysdev_attribute *attr, \
+ char *buf) \
{ \
unsigned int cpu = dev->id; \
ssize_t ret; \
preempt_disable(); /* CPU hotplug */ \
if (cpu_online(cpu)) \
ret = sprintf(buf, "%lu\n", \
- per_cpu(thermal_throttle_##name, cpu)); \
+ per_cpu(thermal_state, cpu).name); \
else \
ret = 0; \
preempt_enable(); \
return ret; \
}
-define_therm_throt_sysdev_show_func(count);
-define_therm_throt_sysdev_one_ro(count);
+define_therm_throt_sysdev_show_func(throttle_count);
+define_therm_throt_sysdev_one_ro(throttle_count);
static struct attribute *thermal_throttle_attrs[] = {
- &attr_count.attr,
+ &attr_throttle_count.attr,
NULL
};
* 1 : Event should be logged further, and a message has been
* printed to the syslog.
*/
-static int therm_throt_process(int curr)
+static int therm_throt_process(bool is_throttled)
{
- unsigned int cpu = smp_processor_id();
- __u64 tmp_jiffs = get_jiffies_64();
- bool was_throttled = __get_cpu_var(thermal_throttle_active);
- bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
+ struct thermal_state *state;
+ unsigned int this_cpu;
+ bool was_throttled;
+ u64 now;
+
+ this_cpu = smp_processor_id();
+ now = get_jiffies_64();
+ state = &per_cpu(thermal_state, this_cpu);
+
+ was_throttled = state->is_throttled;
+ state->is_throttled = is_throttled;
if (is_throttled)
- __get_cpu_var(thermal_throttle_count)++;
+ state->throttle_count++;
- if (!(was_throttled ^ is_throttled) &&
- time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+ if (time_before64(now, state->next_check) &&
+ state->throttle_count != state->last_throttle_count)
return 0;
- __get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
+ state->next_check = now + CHECK_INTERVAL;
+ state->last_throttle_count = state->throttle_count;
/* if we just entered the thermal event */
if (is_throttled) {
- printk(KERN_CRIT "CPU%d: Temperature above threshold, "
- "cpu clock throttled (total events = %lu)\n",
- cpu, __get_cpu_var(thermal_throttle_count));
+ printk(KERN_CRIT "CPU%d: Temperature above threshold, cpu clock throttled (total events = %lu)\n", this_cpu, state->throttle_count);
add_taint(TAINT_MACHINE_CHECK);
return 1;
}
if (was_throttled) {
- printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+ printk(KERN_INFO "CPU%d: Temperature/speed normal\n", this_cpu);
return 1;
}
__u64 msr_val;
rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
- if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
+ if (therm_throt_process((msr_val & THERM_STATUS_PROCHOT) != 0))
mce_log_therm_throt_event(msr_val);
}
sort(range, nr_range, sizeof(struct res_range), cmp_range, NULL);
range_sums = sum_ranges(range, nr_range);
- printk(KERN_INFO "total RAM coverred: %ldM\n",
+ printk(KERN_INFO "total RAM covered: %ldM\n",
range_sums >> (20 - PAGE_SHIFT));
if (mtrr_chunk_size && mtrr_gran_size) {
unsigned long long base, size;
char *ptr;
char line[LINE_SIZE];
+ int length;
size_t linelen;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- if (!len)
- return -EINVAL;
memset(line, 0, LINE_SIZE);
- if (len > LINE_SIZE)
- len = LINE_SIZE;
- if (copy_from_user(line, buf, len - 1))
+
+ length = len;
+ length--;
+
+ if (length > LINE_SIZE - 1)
+ length = LINE_SIZE - 1;
+
+ if (length < 0)
+ return -EINVAL;
+
+ if (copy_from_user(line, buf, length))
return -EFAULT;
linelen = strlen(line);
void set_perf_event_pending(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
+ if (!x86_pmu.apic || !x86_pmu_initialized())
+ return;
+
apic->send_IPI_self(LOCAL_PENDING_VECTOR);
#endif
}
/* Stores the physical address of elf header of crash image. */
unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
+static inline bool is_crashed_pfn_valid(unsigned long pfn)
+{
+#ifndef CONFIG_X86_PAE
+ /*
+ * non-PAE kdump kernel executed from a PAE one will crop high pte
+ * bits and poke unwanted space counting again from address 0, we
+ * don't want that. pte must fit into unsigned long. In fact the
+ * test checks high 12 bits for being zero (pfn will be shifted left
+ * by PAGE_SHIFT).
+ */
+ return pte_pfn(pfn_pte(pfn, __pgprot(0))) == pfn;
+#else
+ return true;
+#endif
+}
+
/**
* copy_oldmem_page - copy one page from "oldmem"
* @pfn: page frame number to be copied
if (!csize)
return 0;
+ if (!is_crashed_pfn_valid(pfn))
+ return -EFAULT;
+
vaddr = kmap_atomic_pfn(pfn, KM_PTE0);
if (!userbuf) {
#include <linux/kallsyms.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
-#include <linux/utsname.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
-#include <linux/utsname.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/module.h>
if (mb < 16)
return 1024*1024;
- /* To 32MB for anything above that */
- return 32*1024*1024;
+ /* To 64MB for anything above that */
+ return 64*1024*1024;
}
#define MAX_RESOURCE_SIZE ((resource_size_t)-1)
static inline void early_console_register(struct console *con, int keep_early)
{
+ if (early_console->index != -1) {
+ printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n",
+ con->name);
+ return;
+ }
early_console = con;
if (keep_early)
early_console->flags &= ~CON_BOOT;
while (*buf != '\0') {
if (!strncmp(buf, "serial", 6)) {
- early_serial_init(buf + 6);
+ buf += 6;
+ early_serial_init(buf);
early_console_register(&early_serial_console, keep);
+ if (!strncmp(buf, ",ttyS", 5))
+ buf += 5;
}
if (!strncmp(buf, "ttyS", 4)) {
early_serial_init(buf + 4);
if (add_efi_memmap)
do_add_efi_memmap();
+#ifdef CONFIG_X86_32
x86_platform.get_wallclock = efi_get_time;
x86_platform.set_wallclock = efi_set_rtc_mmss;
+#endif
/* Setup for EFI runtime service */
reboot_type = BOOT_EFI;
bt $TIF_SYSCALL_AUDIT,%edx
jc sysret_audit
#endif
- /* edx: work flags (arg3) */
- leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
- xorl %esi,%esi # oldset -> arg2
- SAVE_REST
- FIXUP_TOP_OF_STACK %r11
- call do_notify_resume
- RESTORE_TOP_OF_STACK %r11
- RESTORE_REST
- movl $_TIF_WORK_MASK,%edi
- /* Use IRET because user could have changed frame. This
- works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
- DISABLE_INTERRUPTS(CLBR_NONE)
- TRACE_IRQS_OFF
- jmp int_with_check
+ /*
+ * We have a signal, or exit tracing or single-step.
+ * These all wind up with the iret return path anyway,
+ * so just join that path right now.
+ */
+ FIXUP_TOP_OF_STACK %r11, -ARGOFFSET
+ jmp int_check_syscall_exit_work
badsys:
movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
int_very_careful:
TRACE_IRQS_ON
ENABLE_INTERRUPTS(CLBR_NONE)
+int_check_syscall_exit_work:
SAVE_REST
/* Check for syscall exit trace */
testl $_TIF_WORK_SYSCALL_EXIT,%edx
* any particular GDT layout, because we load our own as soon as we
* can.
*/
-.section .text.head,"ax",@progbits
+__HEAD
ENTRY(startup_32)
/* test KEEP_SEGMENTS flag to see if the bootloader is asking
us to not reload segments */
/*
* BSS section
*/
-.section ".bss.page_aligned","wa"
+__PAGE_ALIGNED_BSS
.align PAGE_SIZE_asm
#ifdef CONFIG_X86_PAE
swapper_pg_pmd:
* This starts the data section.
*/
#ifdef CONFIG_X86_PAE
-.section ".data.page_aligned","wa"
+__PAGE_ALIGNED_DATA
/* Page-aligned for the benefit of paravirt? */
.align PAGE_SIZE_asm
ENTRY(swapper_pg_dir)
L3_START_KERNEL = pud_index(__START_KERNEL_map)
.text
- .section .text.head
+ __HEAD
.code64
.globl startup_64
startup_64:
ENTRY(idt_table)
.skip IDT_ENTRIES * 16
- .section .bss.page_aligned, "aw", @nobits
+ __PAGE_ALIGNED_BSS
.align PAGE_SIZE
ENTRY(empty_zero_page)
.skip PAGE_SIZE
EXPORT_SYMBOL(mcount);
#endif
+/*
+ * Note, this is a prototype to get at the symbol for
+ * the export, but dont use it from C code, it is used
+ * by assembly code and is not using C calling convention!
+ */
+#ifndef CONFIG_X86_CMPXCHG64
+extern void cmpxchg8b_emu(void);
+EXPORT_SYMBOL(cmpxchg8b_emu);
+#endif
+
/* Networking helper routines. */
EXPORT_SYMBOL(csum_partial_copy_generic);
* way process stacks are handled. This is done by having a special
* "init_task" linker map entry..
*/
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
- { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
/*
* Initial task structure.
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->irq_spurious_count);
seq_printf(p, " Spurious interrupts\n");
- seq_printf(p, "%*s: ", prec, "CNT");
+ seq_printf(p, "%*s: ", prec, "PMI");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->apic_perf_irqs);
- seq_printf(p, " Performance counter interrupts\n");
+ seq_printf(p, " Performance monitoring interrupts\n");
seq_printf(p, "%*s: ", prec, "PND");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->apic_pending_irqs);
#ifdef CONFIG_SMP
preempt_disable();
load_LDT(pc);
- if (!cpus_equal(current->mm->cpu_vm_mask,
- cpumask_of_cpu(smp_processor_id())))
+ if (!cpumask_equal(mm_cpumask(current->mm),
+ cpumask_of(smp_processor_id())))
smp_call_function(flush_ldt, current->mm, 1);
preempt_enable();
#else
/*
* This variable becomes 1 if iommu=pt is passed on the kernel command line.
- * If this variable is 1, IOMMU implementations do no DMA ranslation for
+ * If this variable is 1, IOMMU implementations do no DMA translation for
* devices and allow every device to access to whole physical memory. This is
* useful if a user want to use an IOMMU only for KVM device assignment to
* guests and not for driver dma translation.
amd_iommu_shutdown();
}
/* Must execute after PCI subsystem */
-fs_initcall(pci_iommu_init);
+rootfs_initcall(pci_iommu_init);
#ifdef CONFIG_PCI
/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
#include <linux/agp_backend.h>
#include <linux/init.h>
#include <linux/mm.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
void __init init_c1e_mask(void)
{
/* If we're using c1e_idle, we need to allocate c1e_mask. */
- if (pm_idle == c1e_idle) {
- alloc_cpumask_var(&c1e_mask, GFP_KERNEL);
- cpumask_clear(c1e_mask);
- }
+ if (pm_idle == c1e_idle)
+ zalloc_cpumask_var(&c1e_mask, GFP_KERNEL);
}
static int __init idle_setup(char *str)
return do_arch_prctl(current, code, addr);
}
+unsigned long KSTK_ESP(struct task_struct *task)
+{
+ return (test_tsk_thread_flag(task, TIF_IA32)) ?
+ (task_pt_regs(task)->sp) : ((task)->thread.usersp);
+}
#include <linux/pm.h>
#include <linux/efi.h>
#include <linux/dmi.h>
+#include <linux/sched.h>
#include <linux/tboot.h>
#include <acpi/reboot.h>
#include <asm/io.h>
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5"),
},
},
+ { /* Handle problems with rebooting on Apple Macmini3,1 */
+ .callback = set_pci_reboot,
+ .ident = "Apple Macmini3,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini3,1"),
+ },
+ },
{ }
};
#endif
current_thread_info()->cpu = 0; /* needed? */
for_each_possible_cpu(i) {
- alloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
- alloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
- alloc_cpumask_var(&cpu_data(i).llc_shared_map, GFP_KERNEL);
- cpumask_clear(per_cpu(cpu_core_map, i));
- cpumask_clear(per_cpu(cpu_sibling_map, i));
- cpumask_clear(cpu_data(i).llc_shared_map);
+ zalloc_cpumask_var(&per_cpu(cpu_sibling_map, i), GFP_KERNEL);
+ zalloc_cpumask_var(&per_cpu(cpu_core_map, i), GFP_KERNEL);
+ zalloc_cpumask_var(&cpu_data(i).llc_shared_map, GFP_KERNEL);
}
set_cpu_sibling_map(0);
#ifdef CONFIG_FRAME_POINTER
return *(unsigned long *)(regs->bp + sizeof(long));
#else
- unsigned long *sp = (unsigned long *)regs->sp;
+ unsigned long *sp =
+ (unsigned long *)kernel_stack_pointer(regs);
/*
* Return address is either directly at stack pointer
* or above a saved flags. Eflags has bits 22-31 zero,
void __init setup_default_timer_irq(void)
{
- irq0.mask = cpumask_of_cpu(0);
setup_irq(0, &irq0);
}
static struct bau_control **uv_bau_table_bases __read_mostly;
static int uv_bau_retry_limit __read_mostly;
-/* position of pnode (which is nasid>>1): */
-static int uv_nshift __read_mostly;
/* base pnode in this partition */
static int uv_partition_base_pnode __read_mostly;
BUG_ON(!adp);
pa = uv_gpa(adp); /* need the real nasid*/
- n = pa >> uv_nshift;
+ n = uv_gpa_to_pnode(pa);
m = pa & uv_mmask;
uv_write_global_mmr64(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE,
* need the pnode of where the memory was really allocated
*/
pa = uv_gpa(pqp);
- pn = pa >> uv_nshift;
+ pn = uv_gpa_to_pnode(pa);
uv_write_global_mmr64(pnode,
UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
GFP_KERNEL, cpu_to_node(cur_cpu));
uv_bau_retry_limit = 1;
- uv_nshift = uv_hub_info->n_val;
- uv_mmask = (1UL << uv_hub_info->n_val) - 1;
+ uv_mmask = (1UL << uv_hub_info->m_val) - 1;
nblades = uv_num_possible_blades();
uv_bau_table_bases = (struct bau_control **)
#include <asm/trampoline.h>
#include <asm/e820.h>
+#if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP)
+#define __trampinit
+#define __trampinitdata
+#else
+#define __trampinit __cpuinit
+#define __trampinitdata __cpuinitdata
+#endif
+
/* ready for x86_64 and x86 */
-unsigned char *__cpuinitdata trampoline_base = __va(TRAMPOLINE_BASE);
+unsigned char *__trampinitdata trampoline_base = __va(TRAMPOLINE_BASE);
void __init reserve_trampoline_memory(void)
{
* bootstrap into the page concerned. The caller
* has made sure it's suitably aligned.
*/
-unsigned long __cpuinit setup_trampoline(void)
+unsigned long __trampinit setup_trampoline(void)
{
memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE);
return virt_to_phys(trampoline_base);
#include <asm/segment.h>
#include <asm/processor-flags.h>
+#ifdef CONFIG_ACPI_SLEEP
+.section .rodata, "a", @progbits
+#else
/* We can free up the trampoline after bootup if cpu hotplug is not supported. */
__CPUINITRODATA
+#endif
.code16
ENTRY(trampoline_data)
#include <linux/spinlock.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
-#include <linux/utsname.h>
#include <linux/kdebug.h>
#include <linux/kernel.h>
#include <linux/module.h>
/*
* The IDT has to be page-aligned to simplify the Pentium
- * F0 0F bug workaround.. We have a special link segment
- * for this.
+ * F0 0F bug workaround.
*/
-gate_desc idt_table[NR_VECTORS]
- __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
+gate_desc idt_table[NR_VECTORS] __page_aligned_data = { { { { 0, 0 } } }, };
#endif
DECLARE_BITMAP(used_vectors, NR_VECTORS);
return;
if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
- pr_info("Skipping synchronization checks as TSC is reliable.\n");
+ printk_once(KERN_INFO "Skipping synchronization checks as TSC is reliable.\n");
return;
}
pv_info.paravirt_enabled = 1;
pv_info.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK;
- pv_info.name = "vmi";
+ pv_info.name = "vmi [deprecated]";
pv_init_ops.patch = vmi_patch;
#endif
/* Text and read-only data */
-
- /* bootstrapping code */
- .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
- _text = .;
- *(.text.head)
- } :text = 0x9090
-
- /* The rest of the text */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
+ _text = .;
+ /* bootstrapping code */
+ HEAD_TEXT
#ifdef CONFIG_X86_32
- /* not really needed, already page aligned */
. = ALIGN(PAGE_SIZE);
*(.text.page_aligned)
#endif
NOTES :text :note
- /* Exception table */
- . = ALIGN(16);
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :text = 0x9090
+ EXCEPTION_TABLE(16) :text = 0x9090
RO_DATA(PAGE_SIZE)
#endif
PAGE_ALIGNED_DATA(PAGE_SIZE)
- *(.data.idt)
CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
#ifdef CONFIG_X86_64
#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
- PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
- PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD_OFFSET (VSYSCALL_ADDR - __vsyscall_0 + LOAD_OFFSET)
#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT_OFFSET (VSYSCALL_ADDR - __vsyscall_0)
#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
+ . = ALIGN(4096);
+ __vsyscall_0 = .;
+
. = VSYSCALL_ADDR;
- .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+ .vsyscall_0 : AT(VLOAD(.vsyscall_0)) {
*(.vsyscall_0)
} :user
- __vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
.vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
*(.vsyscall_fn)
*(.vsyscall_3)
}
- . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+ . = __vsyscall_0 + PAGE_SIZE;
#undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
#undef VLOAD_OFFSET
#undef VLOAD
#undef VVIRT_OFFSET
PERCPU_VADDR(0, :percpu)
#endif
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
#ifdef CONFIG_X86_64
:init
#endif
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- INIT_DATA
- }
-
- . = ALIGN(16);
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
-
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
+ INIT_DATA_SECTION(16)
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
__x86_cpu_dev_start = .;
__x86_cpu_dev_end = .;
}
- SECURITY_INIT
-
. = ALIGN(8);
.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
__parainstructions = .;
EXIT_DATA
}
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
-
#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU(PAGE_SIZE)
#endif
#ifdef CONFIG_X86_32
+/*
+ * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
+ */
. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
"kernel image bigger than KERNEL_IMAGE_SIZE");
#else
}
#ifdef CONFIG_SYSCTL
-
-static int
-vsyscall_sysctl_change(ctl_table *ctl, int write, struct file * filp,
- void __user *buffer, size_t *lenp, loff_t *ppos)
-{
- return proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
-}
-
static ctl_table kernel_table2[] = {
{ .procname = "vsyscall64",
.data = &vsyscall_gtod_data.sysctl_enabled, .maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = vsyscall_sysctl_change },
+ .proc_handler = proc_dointvec },
{}
};
* itself with the initial count and continues counting
* from there.
*/
- remaining = hrtimer_expires_remaining(&ps->pit_timer.timer);
+ remaining = hrtimer_get_remaining(&ps->pit_timer.timer);
elapsed = ps->pit_timer.period - ktime_to_ns(remaining);
elapsed = mod_64(elapsed, ps->pit_timer.period);
if (apic_get_reg(apic, APIC_TMICT) == 0)
return 0;
- remaining = hrtimer_expires_remaining(&apic->lapic_timer.timer);
+ remaining = hrtimer_get_remaining(&apic->lapic_timer.timer);
if (ktime_to_ns(remaining) < 0)
remaining = ktime_set(0, 0);
{
ktime_t now = apic->lapic_timer.timer.base->get_time();
- apic->lapic_timer.period = apic_get_reg(apic, APIC_TMICT) *
+ apic->lapic_timer.period = (u64)apic_get_reg(apic, APIC_TMICT) *
APIC_BUS_CYCLE_NS * apic->divide_count;
atomic_set(&apic->lapic_timer.pending, 0);
#define CREATE_TRACE_POINTS
#include "mmutrace.h"
+#define SPTE_HOST_WRITEABLE (1ULL << PT_FIRST_AVAIL_BITS_SHIFT)
+
#define SHADOW_PT_INDEX(addr, level) PT64_INDEX(addr, level)
struct kvm_rmap_desc {
if (*spte & shadow_accessed_mask)
kvm_set_pfn_accessed(pfn);
if (is_writeble_pte(*spte))
- kvm_release_pfn_dirty(pfn);
- else
- kvm_release_pfn_clean(pfn);
+ kvm_set_pfn_dirty(pfn);
rmapp = gfn_to_rmap(kvm, sp->gfns[spte - sp->spt], sp->role.level);
if (!*rmapp) {
printk(KERN_ERR "rmap_remove: %p %llx 0->BUG\n", spte, *spte);
return write_protected;
}
-static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp)
+static int kvm_unmap_rmapp(struct kvm *kvm, unsigned long *rmapp,
+ unsigned long data)
{
u64 *spte;
int need_tlb_flush = 0;
return need_tlb_flush;
}
+static int kvm_set_pte_rmapp(struct kvm *kvm, unsigned long *rmapp,
+ unsigned long data)
+{
+ int need_flush = 0;
+ u64 *spte, new_spte;
+ pte_t *ptep = (pte_t *)data;
+ pfn_t new_pfn;
+
+ WARN_ON(pte_huge(*ptep));
+ new_pfn = pte_pfn(*ptep);
+ spte = rmap_next(kvm, rmapp, NULL);
+ while (spte) {
+ BUG_ON(!is_shadow_present_pte(*spte));
+ rmap_printk("kvm_set_pte_rmapp: spte %p %llx\n", spte, *spte);
+ need_flush = 1;
+ if (pte_write(*ptep)) {
+ rmap_remove(kvm, spte);
+ __set_spte(spte, shadow_trap_nonpresent_pte);
+ spte = rmap_next(kvm, rmapp, NULL);
+ } else {
+ new_spte = *spte &~ (PT64_BASE_ADDR_MASK);
+ new_spte |= (u64)new_pfn << PAGE_SHIFT;
+
+ new_spte &= ~PT_WRITABLE_MASK;
+ new_spte &= ~SPTE_HOST_WRITEABLE;
+ if (is_writeble_pte(*spte))
+ kvm_set_pfn_dirty(spte_to_pfn(*spte));
+ __set_spte(spte, new_spte);
+ spte = rmap_next(kvm, rmapp, spte);
+ }
+ }
+ if (need_flush)
+ kvm_flush_remote_tlbs(kvm);
+
+ return 0;
+}
+
static int kvm_handle_hva(struct kvm *kvm, unsigned long hva,
- int (*handler)(struct kvm *kvm, unsigned long *rmapp))
+ unsigned long data,
+ int (*handler)(struct kvm *kvm, unsigned long *rmapp,
+ unsigned long data))
{
int i, j;
int retval = 0;
if (hva >= start && hva < end) {
gfn_t gfn_offset = (hva - start) >> PAGE_SHIFT;
- retval |= handler(kvm, &memslot->rmap[gfn_offset]);
+ retval |= handler(kvm, &memslot->rmap[gfn_offset],
+ data);
for (j = 0; j < KVM_NR_PAGE_SIZES - 1; ++j) {
int idx = gfn_offset;
idx /= KVM_PAGES_PER_HPAGE(PT_DIRECTORY_LEVEL + j);
retval |= handler(kvm,
- &memslot->lpage_info[j][idx].rmap_pde);
+ &memslot->lpage_info[j][idx].rmap_pde,
+ data);
}
}
}
int kvm_unmap_hva(struct kvm *kvm, unsigned long hva)
{
- return kvm_handle_hva(kvm, hva, kvm_unmap_rmapp);
+ return kvm_handle_hva(kvm, hva, 0, kvm_unmap_rmapp);
}
-static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp)
+void kvm_set_spte_hva(struct kvm *kvm, unsigned long hva, pte_t pte)
+{
+ kvm_handle_hva(kvm, hva, (unsigned long)&pte, kvm_set_pte_rmapp);
+}
+
+static int kvm_age_rmapp(struct kvm *kvm, unsigned long *rmapp,
+ unsigned long data)
{
u64 *spte;
int young = 0;
gfn = unalias_gfn(vcpu->kvm, gfn);
rmapp = gfn_to_rmap(vcpu->kvm, gfn, sp->role.level);
- kvm_unmap_rmapp(vcpu->kvm, rmapp);
+ kvm_unmap_rmapp(vcpu->kvm, rmapp, 0);
kvm_flush_remote_tlbs(vcpu->kvm);
}
int kvm_age_hva(struct kvm *kvm, unsigned long hva)
{
- return kvm_handle_hva(kvm, hva, kvm_age_rmapp);
+ return kvm_handle_hva(kvm, hva, 0, kvm_age_rmapp);
}
#ifdef MMU_DEBUG
unsigned pte_access, int user_fault,
int write_fault, int dirty, int level,
gfn_t gfn, pfn_t pfn, bool speculative,
- bool can_unsync)
+ bool can_unsync, bool reset_host_protection)
{
u64 spte;
int ret = 0;
spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
kvm_is_mmio_pfn(pfn));
+ if (reset_host_protection)
+ spte |= SPTE_HOST_WRITEABLE;
+
spte |= (u64)pfn << PAGE_SHIFT;
if ((pte_access & ACC_WRITE_MASK)
unsigned pt_access, unsigned pte_access,
int user_fault, int write_fault, int dirty,
int *ptwrite, int level, gfn_t gfn,
- pfn_t pfn, bool speculative)
+ pfn_t pfn, bool speculative,
+ bool reset_host_protection)
{
int was_rmapped = 0;
int was_writeble = is_writeble_pte(*sptep);
}
if (set_spte(vcpu, sptep, pte_access, user_fault, write_fault,
- dirty, level, gfn, pfn, speculative, true)) {
+ dirty, level, gfn, pfn, speculative, true,
+ reset_host_protection)) {
if (write_fault)
*ptwrite = 1;
kvm_x86_ops->tlb_flush(vcpu);
page_header_update_slot(vcpu->kvm, sptep, gfn);
if (!was_rmapped) {
rmap_count = rmap_add(vcpu, sptep, gfn);
- if (!is_rmap_spte(*sptep))
- kvm_release_pfn_clean(pfn);
+ kvm_release_pfn_clean(pfn);
if (rmap_count > RMAP_RECYCLE_THRESHOLD)
rmap_recycle(vcpu, sptep, gfn);
} else {
if (iterator.level == level) {
mmu_set_spte(vcpu, iterator.sptep, ACC_ALL, ACC_ALL,
0, write, 1, &pt_write,
- level, gfn, pfn, false);
+ level, gfn, pfn, false, true);
++vcpu->stat.pf_fixed;
break;
}
if (mmu_notifier_retry(vcpu, vcpu->arch.update_pte.mmu_seq))
return;
kvm_get_pfn(pfn);
+ /*
+ * we call mmu_set_spte() with reset_host_protection = true beacuse that
+ * vcpu->arch.update_pte.pfn was fetched from get_user_pages(write = 1).
+ */
mmu_set_spte(vcpu, spte, page->role.access, pte_access, 0, 0,
gpte & PT_DIRTY_MASK, NULL, PT_PAGE_TABLE_LEVEL,
- gpte_to_gfn(gpte), pfn, true);
+ gpte_to_gfn(gpte), pfn, true, true);
}
/*
user_fault, write_fault,
gw->ptes[gw->level-1] & PT_DIRTY_MASK,
ptwrite, level,
- gw->gfn, pfn, false);
+ gw->gfn, pfn, false, true);
break;
}
static int FNAME(sync_page)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp)
{
int i, offset, nr_present;
+ bool reset_host_protection;
offset = nr_present = 0;
nr_present++;
pte_access = sp->role.access & FNAME(gpte_access)(vcpu, gpte);
+ if (!(sp->spt[i] & SPTE_HOST_WRITEABLE)) {
+ pte_access &= ~ACC_WRITE_MASK;
+ reset_host_protection = 0;
+ } else {
+ reset_host_protection = 1;
+ }
set_spte(vcpu, &sp->spt[i], pte_access, 0, 0,
is_dirty_gpte(gpte), PT_PAGE_TABLE_LEVEL, gfn,
- spte_to_pfn(sp->spt[i]), true, false);
+ spte_to_pfn(sp->spt[i]), true, false,
+ reset_host_protection);
}
return !nr_present;
rdtscll(tsc_this);
delta = vcpu->arch.host_tsc - tsc_this;
svm->vmcb->control.tsc_offset += delta;
+ if (is_nested(svm))
+ svm->nested.hsave->control.tsc_offset += delta;
vcpu->cpu = cpu;
kvm_migrate_timers(vcpu);
svm->asid_generation = 0;
switch (ecx) {
case MSR_IA32_TSC: {
- u64 tsc;
+ u64 tsc_offset;
+
+ if (is_nested(svm))
+ tsc_offset = svm->nested.hsave->control.tsc_offset;
+ else
+ tsc_offset = svm->vmcb->control.tsc_offset;
- rdtscll(tsc);
- *data = svm->vmcb->control.tsc_offset + tsc;
+ *data = tsc_offset + native_read_tsc();
break;
}
case MSR_K6_STAR:
switch (ecx) {
case MSR_IA32_TSC: {
- u64 tsc;
+ u64 tsc_offset = data - native_read_tsc();
+ u64 g_tsc_offset = 0;
+
+ if (is_nested(svm)) {
+ g_tsc_offset = svm->vmcb->control.tsc_offset -
+ svm->nested.hsave->control.tsc_offset;
+ svm->nested.hsave->control.tsc_offset = tsc_offset;
+ }
+
+ svm->vmcb->control.tsc_offset = tsc_offset + g_tsc_offset;
- rdtscll(tsc);
- svm->vmcb->control.tsc_offset = data - tsc;
break;
}
case MSR_K6_STAR:
if (vcpu->cpu != cpu) {
vcpu_clear(vmx);
kvm_migrate_timers(vcpu);
- vpid_sync_vcpu_all(vmx);
+ set_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests);
local_irq_disable();
list_add(&vmx->local_vcpus_link,
&per_cpu(vcpus_on_cpu, cpu));
if (cpuid->nent < 1)
goto out;
+ if (cpuid->nent > KVM_MAX_CPUID_ENTRIES)
+ cpuid->nent = KVM_MAX_CPUID_ENTRIES;
r = -ENOMEM;
cpuid_entries = vmalloc(sizeof(struct kvm_cpuid_entry2) * cpuid->nent);
if (!cpuid_entries)
lib-y += checksum_32.o
lib-y += strstr_32.o
lib-y += semaphore_32.o string_32.o
-
+ifneq ($(CONFIG_X86_CMPXCHG64),y)
+ lib-y += cmpxchg8b_emu.o
+endif
lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
else
obj-y += io_64.o iomap_copy_64.o
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/frame.h>
+#include <asm/dwarf2.h>
+
+
+.text
+
+/*
+ * Inputs:
+ * %esi : memory location to compare
+ * %eax : low 32 bits of old value
+ * %edx : high 32 bits of old value
+ * %ebx : low 32 bits of new value
+ * %ecx : high 32 bits of new value
+ */
+ENTRY(cmpxchg8b_emu)
+CFI_STARTPROC
+
+#
+# Emulate 'cmpxchg8b (%esi)' on UP except we don't
+# set the whole ZF thing (caller will just compare
+# eax:edx with the expected value)
+#
+cmpxchg8b_emu:
+ pushfl
+ cli
+
+ cmpl (%esi), %eax
+ jne not_same
+ cmpl 4(%esi), %edx
+ jne half_same
+
+ movl %ebx, (%esi)
+ movl %ecx, 4(%esi)
+
+ popfl
+ ret
+
+ not_same:
+ movl (%esi), %eax
+ half_same:
+ movl 4(%esi), %edx
+
+ popfl
+ ret
+
+CFI_ENDPROC
+ENDPROC(cmpxchg8b_emu)
obj-y := init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
- pat.o pgtable.o physaddr.o gup.o
+ pat.o pgtable.o physaddr.o gup.o setup_nx.o
# Make sure __phys_addr has no stackprotector
nostackp := $(call cc-option, -fno-stack-protector)
CFLAGS_physaddr.o := $(nostackp)
+CFLAGS_setup_nx.o := $(nostackp)
obj-$(CONFIG_SMP) += tlb.o
info.si_errno = 0;
info.si_code = si_code;
info.si_addr = (void __user *)address;
+ info.si_addr_lsb = si_code == BUS_MCEERR_AR ? PAGE_SHIFT : 0;
force_sig_info(si_signo, &info, tsk);
}
}
static void
-do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address)
+do_sigbus(struct pt_regs *regs, unsigned long error_code, unsigned long address,
+ unsigned int fault)
{
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
+ int code = BUS_ADRERR;
up_read(&mm->mmap_sem);
tsk->thread.error_code = error_code;
tsk->thread.trap_no = 14;
- force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk);
+#ifdef CONFIG_MEMORY_FAILURE
+ if (fault & VM_FAULT_HWPOISON) {
+ printk(KERN_ERR
+ "MCE: Killing %s:%d due to hardware memory corruption fault at %lx\n",
+ tsk->comm, tsk->pid, address);
+ code = BUS_MCEERR_AR;
+ }
+#endif
+ force_sig_info_fault(SIGBUS, code, address, tsk);
}
static noinline void
if (fault & VM_FAULT_OOM) {
out_of_memory(regs, error_code, address);
} else {
- if (fault & VM_FAULT_SIGBUS)
- do_sigbus(regs, error_code, address);
+ if (fault & (VM_FAULT_SIGBUS|VM_FAULT_HWPOISON))
+ do_sigbus(regs, error_code, address, fault);
else
BUG();
}
#endif
;
-int nx_enabled;
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-static int disable_nx __cpuinitdata;
-
-/*
- * noexec = on|off
- *
- * Control non-executable mappings for processes.
- *
- * on Enable
- * off Disable
- */
-static int __init noexec_setup(char *str)
-{
- if (!str)
- return -EINVAL;
- if (!strncmp(str, "on", 2)) {
- __supported_pte_mask |= _PAGE_NX;
- disable_nx = 0;
- } else if (!strncmp(str, "off", 3)) {
- disable_nx = 1;
- __supported_pte_mask &= ~_PAGE_NX;
- }
- return 0;
-}
-early_param("noexec", noexec_setup);
-#endif
-
-#ifdef CONFIG_X86_PAE
-static void __init set_nx(void)
-{
- unsigned int v[4], l, h;
-
- if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
- cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
-
- if ((v[3] & (1 << 20)) && !disable_nx) {
- rdmsr(MSR_EFER, l, h);
- l |= EFER_NX;
- wrmsr(MSR_EFER, l, h);
- nx_enabled = 1;
- __supported_pte_mask |= _PAGE_NX;
- }
- }
-}
-#else
-static inline void set_nx(void)
-{
-}
-#endif
-
-#ifdef CONFIG_X86_64
-void __cpuinit check_efer(void)
-{
- unsigned long efer;
-
- rdmsrl(MSR_EFER, efer);
- if (!(efer & EFER_NX) || disable_nx)
- __supported_pte_mask &= ~_PAGE_NX;
-}
-#endif
-
static void __init find_early_table_space(unsigned long end, int use_pse,
int use_gbpages)
{
mb();
}
+EXPORT_SYMBOL_GPL(clflush_cache_range);
static void __cpa_flush_all(void *arg)
{
void pat_init(void)
{
u64 pat;
+ bool boot_cpu = !boot_pat_state;
if (!pat_enabled)
return;
rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
wrmsrl(MSR_IA32_CR_PAT, pat);
- printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
- smp_processor_id(), boot_pat_state, pat);
+
+ if (boot_cpu)
+ printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
+ smp_processor_id(), boot_pat_state, pat);
}
#undef PAT
--- /dev/null
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+
+int nx_enabled;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+static int disable_nx __cpuinitdata;
+
+/*
+ * noexec = on|off
+ *
+ * Control non-executable mappings for processes.
+ *
+ * on Enable
+ * off Disable
+ */
+static int __init noexec_setup(char *str)
+{
+ if (!str)
+ return -EINVAL;
+ if (!strncmp(str, "on", 2)) {
+ __supported_pte_mask |= _PAGE_NX;
+ disable_nx = 0;
+ } else if (!strncmp(str, "off", 3)) {
+ disable_nx = 1;
+ __supported_pte_mask &= ~_PAGE_NX;
+ }
+ return 0;
+}
+early_param("noexec", noexec_setup);
+#endif
+
+#ifdef CONFIG_X86_PAE
+void __init set_nx(void)
+{
+ unsigned int v[4], l, h;
+
+ if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
+ cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
+
+ if ((v[3] & (1 << 20)) && !disable_nx) {
+ rdmsr(MSR_EFER, l, h);
+ l |= EFER_NX;
+ wrmsr(MSR_EFER, l, h);
+ nx_enabled = 1;
+ __supported_pte_mask |= _PAGE_NX;
+ }
+ }
+}
+#else
+void set_nx(void)
+{
+}
+#endif
+
+#ifdef CONFIG_X86_64
+void __cpuinit check_efer(void)
+{
+ unsigned long efer;
+
+ rdmsrl(MSR_EFER, efer);
+ if (!(efer & EFER_NX) || disable_nx)
+ __supported_pte_mask &= ~_PAGE_NX;
+}
+#endif
+
{
if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK)
BUG();
- cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask);
+ cpumask_clear_cpu(cpu,
+ mm_cpumask(percpu_read(cpu_tlbstate.active_mm)));
load_cr3(swapper_pg_dir);
}
EXPORT_SYMBOL_GPL(leave_mm);
preempt_disable();
local_flush_tlb();
- if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+ if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+ flush_tlb_others(mm_cpumask(mm), mm, TLB_FLUSH_ALL);
preempt_enable();
}
else
leave_mm(smp_processor_id());
}
- if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL);
+ if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+ flush_tlb_others(mm_cpumask(mm), mm, TLB_FLUSH_ALL);
preempt_enable();
}
leave_mm(smp_processor_id());
}
- if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids)
- flush_tlb_others(&mm->cpu_vm_mask, mm, va);
+ if (cpumask_any_but(mm_cpumask(mm), smp_processor_id()) < nr_cpu_ids)
+ flush_tlb_others(mm_cpumask(mm), mm, va);
preempt_enable();
}
#else /* CONFIG_X86_32 */
-static unsigned char mp_bus_to_node[BUS_NR] = {
+static int mp_bus_to_node[BUS_NR] = {
[0 ... BUS_NR - 1] = -1
};
pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
}
-static struct vm_operations_struct pci_mmap_ops = {
+static const struct vm_operations_struct pci_mmap_ops = {
.access = generic_access_phys,
};
$(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \
-Wl,-T,$(filter %.lds,$^) $(filter %.o,$^)
-VDSO_LDFLAGS = -fPIC -shared $(call ld-option, -Wl$(comma)--hash-style=sysv)
+VDSO_LDFLAGS = -fPIC -shared $(call cc-ldoption, -Wl$(comma)--hash-style=sysv)
GCOV_PROFILE := n
#
return 0;
}
-static struct file_operations u32_array_fops = {
+static const struct file_operations u32_array_fops = {
.owner = THIS_MODULE,
.open = u32_array_open,
.release= xen_array_release,
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
+ unsigned maskebx = ~0;
unsigned maskecx = ~0;
unsigned maskedx = ~0;
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
- if (*ax == 1) {
+ switch (*ax) {
+ case 1:
maskecx = cpuid_leaf1_ecx_mask;
maskedx = cpuid_leaf1_edx_mask;
+ break;
+
+ case 0xb:
+ /* Suppress extended topology stuff */
+ maskebx = 0;
+ break;
}
asm(XEN_EMULATE_PREFIX "cpuid"
"=d" (*dx)
: "0" (*ax), "2" (*cx));
+ *bx &= maskebx;
*cx &= maskecx;
*dx &= maskedx;
}
* Set up some pagetable state before starting to set any ptes.
*/
+ xen_init_mmu_ops();
+
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
if (!xen_initial_domain())
__supported_pte_mask |= _PAGE_IOMAP;
+#ifdef CONFIG_X86_64
+ /* Work out if we support NX */
+ check_efer();
+#endif
+
xen_setup_features();
/* Get mfn list */
*/
xen_setup_stackprotector();
- xen_init_mmu_ops();
xen_init_irq_ops();
xen_init_cpuid_mask();
pgd = (pgd_t *)xen_start_info->pt_base;
-#ifdef CONFIG_X86_64
- /* Work out if we support NX */
- check_efer();
-#endif
-
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
/* Get the "official" set of cpus referring to our pagetable. */
if (!alloc_cpumask_var(&mask, GFP_ATOMIC)) {
for_each_online_cpu(cpu) {
- if (!cpumask_test_cpu(cpu, &mm->cpu_vm_mask)
+ if (!cpumask_test_cpu(cpu, mm_cpumask(mm))
&& per_cpu(xen_current_cr3, cpu) != __pa(mm->pgd))
continue;
smp_call_function_single(cpu, drop_other_mm_ref, mm, 1);
}
return;
}
- cpumask_copy(mask, &mm->cpu_vm_mask);
+ cpumask_copy(mask, mm_cpumask(mm));
/* It's possible that a vcpu may have a stale reference to our
cr3, because its in lazy mode, and it hasn't yet flushed
-e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
quiet_cmd__cpp_lds_S = LDS $@
- cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
+ cmd__cpp_lds_S = $(CPP) $(cpp_flags) -P -C -Uxtensa -D__ASSEMBLY__ $< \
+ | sed $(sed-y) >$@
$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
$(call if_changed_dep,_cpp_lds_S)
* BSS section
*/
-.section ".bss.page_aligned", "w"
+__PAGE_ALIGNED_BSS
#ifdef CONFIG_MMU
ENTRY(swapper_pg_dir)
.fill PAGE_SIZE, 1, 0
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
-union thread_union init_thread_union
- __attribute__((__section__(".data.init_task"))) =
-{ INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+ { INIT_THREAD_INFO(init_task) };
struct task_struct init_task = INIT_TASK(init_task);
*/
#include <linux/errno.h>
+#include <linux/sched.h>
#include <linux/time.h>
#include <linux/clocksource.h>
#include <linux/interrupt.h>
*/
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
#include <variant/core.h>
#include <platform/hardware.h>
.fixup : { *(.fixup) }
- . = ALIGN(16);
-
- __ex_table : {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- }
-
+ EXCEPTION_TABLE(16)
/* Data section */
- . = ALIGN(XCHAL_ICACHE_LINESIZE);
_fdata = .;
- .data :
- {
- DATA_DATA
- CONSTRUCTORS
- . = ALIGN(XCHAL_ICACHE_LINESIZE);
- *(.data.cacheline_aligned)
- }
-
+ RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
_edata = .;
- /* The initial task */
- . = ALIGN(8192);
- .data.init_task : { *(.data.init_task) }
-
/* Initialization code and data: */
- . = ALIGN(1 << 12);
+ . = ALIGN(PAGE_SIZE);
__init_begin = .;
- .init.text : {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
+ INIT_TEXT_SECTION(PAGE_SIZE)
.init.data :
{
.DebugInterruptVector.text);
__boot_reloc_table_end = ABSOLUTE(.) ;
- }
- . = ALIGN(XCHAL_ICACHE_LINESIZE);
-
- __setup_start = .;
- .init.setup : { *(.init.setup) }
- __setup_end = .;
-
- __initcall_start = .;
- .initcall.init : {
- INITCALLS
+ INIT_SETUP(XCHAL_ICACHE_LINESIZE)
+ INIT_CALLS
+ CON_INITCALL
+ SECURITY_INITCALL
+ INIT_RAM_FS
}
- __initcall_end = .;
-
- __con_initcall_start = .;
- .con_initcall.init : { *(.con_initcall.init) }
- __con_initcall_end = .;
-
- SECURITY_INIT
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(4096);
- __initramfs_start =.;
- .init.ramfs : { *(.init.ramfs) }
- __initramfs_end = .;
-#endif
-
- PERCPU(4096)
+ PERCPU(PAGE_SIZE)
/* We need this dummy segment here */
.DoubleExceptionVector.literal)
. = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
- . = ALIGN(1 << 12);
+ . = ALIGN(PAGE_SIZE);
__init_end = .;
- . = ALIGN(8192);
-
- /* BSS section */
- _bss_start = .;
- .bss : { *(.bss.page_aligned) *(.bss) }
- _bss_end = .;
+ BSS_SECTION(0, 8192, 0)
_end = .;
if (bio->bi_private)
complete(bio->bi_private);
+ __free_page(bio_page(bio));
bio_put(bio);
}
struct request_queue *q = bdev_get_queue(bdev);
int type = flags & DISCARD_FL_BARRIER ?
DISCARD_BARRIER : DISCARD_NOBARRIER;
+ struct bio *bio;
+ struct page *page;
int ret = 0;
if (!q)
return -ENXIO;
- if (!q->prepare_discard_fn)
+ if (!blk_queue_discard(q))
return -EOPNOTSUPP;
while (nr_sects && !ret) {
- struct bio *bio = bio_alloc(gfp_mask, 0);
- if (!bio)
- return -ENOMEM;
+ unsigned int sector_size = q->limits.logical_block_size;
+ unsigned int max_discard_sectors =
+ min(q->limits.max_discard_sectors, UINT_MAX >> 9);
+ bio = bio_alloc(gfp_mask, 1);
+ if (!bio)
+ goto out;
+ bio->bi_sector = sector;
bio->bi_end_io = blkdev_discard_end_io;
bio->bi_bdev = bdev;
if (flags & DISCARD_FL_WAIT)
bio->bi_private = &wait;
- bio->bi_sector = sector;
+ /*
+ * Add a zeroed one-sector payload as that's what
+ * our current implementations need. If we'll ever need
+ * more the interface will need revisiting.
+ */
+ page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+ if (!page)
+ goto out_free_bio;
+ if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size)
+ goto out_free_page;
- if (nr_sects > queue_max_hw_sectors(q)) {
- bio->bi_size = queue_max_hw_sectors(q) << 9;
- nr_sects -= queue_max_hw_sectors(q);
- sector += queue_max_hw_sectors(q);
+ /*
+ * And override the bio size - the way discard works we
+ * touch many more blocks on disk than the actual payload
+ * length.
+ */
+ if (nr_sects > max_discard_sectors) {
+ bio->bi_size = max_discard_sectors << 9;
+ nr_sects -= max_discard_sectors;
+ sector += max_discard_sectors;
} else {
bio->bi_size = nr_sects << 9;
nr_sects = 0;
bio_put(bio);
}
return ret;
+out_free_page:
+ __free_page(page);
+out_free_bio:
+ bio_put(bio);
+out:
+ return -ENOMEM;
}
EXPORT_SYMBOL(blkdev_issue_discard);
#include "blk.h"
EXPORT_TRACEPOINT_SYMBOL_GPL(block_remap);
+EXPORT_TRACEPOINT_SYMBOL_GPL(block_rq_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
static int __make_request(struct request_queue *q, struct bio *bio);
if (now == part->stamp)
return;
- if (part->in_flight) {
+ if (part_in_flight(part)) {
__part_stat_add(cpu, part, time_in_queue,
part_in_flight(part) * (now - part->stamp));
__part_stat_add(cpu, part, io_ticks, (now - part->stamp));
req->cmd_flags |= REQ_DISCARD;
if (bio_rw_flagged(bio, BIO_RW_BARRIER))
req->cmd_flags |= REQ_SOFTBARRIER;
- req->q->prepare_discard_fn(req->q, req);
} else if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)))
req->cmd_flags |= REQ_HARDBARRIER;
const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
int rw_flags;
- if (bio_rw_flagged(bio, BIO_RW_BARRIER) && bio_has_data(bio) &&
+ if (bio_rw_flagged(bio, BIO_RW_BARRIER) &&
(q->next_ordered == QUEUE_ORDERED_NONE)) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
goto end_io;
}
- if (unlikely(nr_sectors > queue_max_hw_sectors(q))) {
+ if (unlikely(!bio_rw_flagged(bio, BIO_RW_DISCARD) &&
+ nr_sectors > queue_max_hw_sectors(q))) {
printk(KERN_ERR "bio too big device %s (%u > %u)\n",
bdevname(bio->bi_bdev, b),
bio_sectors(bio),
goto end_io;
if (bio_rw_flagged(bio, BIO_RW_DISCARD) &&
- !q->prepare_discard_fn) {
+ !blk_queue_discard(q)) {
err = -EOPNOTSUPP;
goto end_io;
}
}
EXPORT_SYMBOL(blk_queue_prep_rq);
-/**
- * blk_queue_set_discard - set a discard_sectors function for queue
- * @q: queue
- * @dfn: prepare_discard function
- *
- * It's possible for a queue to register a discard callback which is used
- * to transform a discard request into the appropriate type for the
- * hardware. If none is registered, then discard requests are failed
- * with %EOPNOTSUPP.
- *
- */
-void blk_queue_set_discard(struct request_queue *q, prepare_discard_fn *dfn)
-{
- q->prepare_discard_fn = dfn;
-}
-EXPORT_SYMBOL(blk_queue_set_discard);
-
/**
* blk_queue_merge_bvec - set a merge_bvec function for queue
* @q: queue
lim->max_hw_segments = MAX_HW_SEGMENTS;
lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
lim->max_segment_size = MAX_SEGMENT_SIZE;
- lim->max_sectors = lim->max_hw_sectors = SAFE_MAX_SECTORS;
+ lim->max_sectors = BLK_DEF_MAX_SECTORS;
+ lim->max_hw_sectors = INT_MAX;
+ lim->max_discard_sectors = SAFE_MAX_SECTORS;
lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
lim->bounce_pfn = (unsigned long)(BLK_BOUNCE_ANY >> PAGE_SHIFT);
lim->alignment_offset = 0;
q->unplug_timer.data = (unsigned long)q;
blk_set_default_limits(&q->limits);
+ blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
/*
* If the caller didn't supply a lock, fall back to our embedded
}
EXPORT_SYMBOL(blk_queue_max_hw_sectors);
+/**
+ * blk_queue_max_discard_sectors - set max sectors for a single discard
+ * @q: the request queue for the device
+ * @max_discard_sectors: maximum number of sectors to discard
+ **/
+void blk_queue_max_discard_sectors(struct request_queue *q,
+ unsigned int max_discard_sectors)
+{
+ q->limits.max_discard_sectors = max_discard_sectors;
+}
+EXPORT_SYMBOL(blk_queue_max_discard_sectors);
+
/**
* blk_queue_max_phys_segments - set max phys segments for a request for this queue
* @q: the request queue for the device
if (ret) {
kobject_uevent(&q->kobj, KOBJ_REMOVE);
kobject_del(&q->kobj);
+ blk_trace_remove_sysfs(disk_to_dev(disk));
return ret;
}
if (WARN_ON(!q))
return;
- if (q->request_fn) {
+ if (q->request_fn)
elv_unregister_queue(q);
- kobject_uevent(&q->kobj, KOBJ_REMOVE);
- kobject_del(&q->kobj);
- kobject_put(&disk_to_dev(disk)->kobj);
- }
+ kobject_uevent(&q->kobj, KOBJ_REMOVE);
+ kobject_del(&q->kobj);
+ blk_trace_remove_sysfs(disk_to_dev(disk));
+ kobject_put(&disk_to_dev(disk)->kobj);
}
max_depth -= 2;
if (!max_depth)
max_depth = 1;
- if (q->in_flight[0] > max_depth)
+ if (q->in_flight[BLK_RW_ASYNC] > max_depth)
return 1;
}
unsigned int cfq_slice[2];
unsigned int cfq_slice_async_rq;
unsigned int cfq_slice_idle;
+ unsigned int cfq_latency;
struct list_head cic_list;
* Fallback dummy cfqq for extreme OOM conditions
*/
struct cfq_queue oom_cfqq;
+
+ unsigned long last_end_sync_rq;
};
enum cfqq_state_flags {
CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */
CFQ_CFQQ_FLAG_sync, /* synchronous queue */
CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */
+ CFQ_CFQQ_FLAG_coop_preempt, /* coop preempt */
};
#define CFQ_CFQQ_FNS(name) \
CFQ_CFQQ_FNS(slice_new);
CFQ_CFQQ_FNS(sync);
CFQ_CFQQ_FNS(coop);
+CFQ_CFQQ_FNS(coop_preempt);
#undef CFQ_CFQQ_FNS
#define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \
blk_add_trace_msg((cfqd)->queue, "cfq " fmt, ##args)
static void cfq_dispatch_insert(struct request_queue *, struct request *);
-static struct cfq_queue *cfq_get_queue(struct cfq_data *, int,
+static struct cfq_queue *cfq_get_queue(struct cfq_data *, bool,
struct io_context *, gfp_t);
static struct cfq_io_context *cfq_cic_lookup(struct cfq_data *,
struct io_context *);
}
static inline struct cfq_queue *cic_to_cfqq(struct cfq_io_context *cic,
- int is_sync)
+ bool is_sync)
{
- return cic->cfqq[!!is_sync];
+ return cic->cfqq[is_sync];
}
static inline void cic_set_cfqq(struct cfq_io_context *cic,
- struct cfq_queue *cfqq, int is_sync)
+ struct cfq_queue *cfqq, bool is_sync)
{
- cic->cfqq[!!is_sync] = cfqq;
+ cic->cfqq[is_sync] = cfqq;
}
/*
* We regard a request as SYNC, if it's either a read or has the SYNC bit
* set (in which case it could also be direct WRITE).
*/
-static inline int cfq_bio_sync(struct bio *bio)
+static inline bool cfq_bio_sync(struct bio *bio)
{
- if (bio_data_dir(bio) == READ || bio_rw_flagged(bio, BIO_RW_SYNCIO))
- return 1;
-
- return 0;
+ return bio_data_dir(bio) == READ || bio_rw_flagged(bio, BIO_RW_SYNCIO);
}
/*
* if a queue is marked sync and has sync io queued. A sync queue with async
* io only, should not get full sync slice length.
*/
-static inline int cfq_prio_slice(struct cfq_data *cfqd, int sync,
+static inline int cfq_prio_slice(struct cfq_data *cfqd, bool sync,
unsigned short prio)
{
const int base_slice = cfqd->cfq_slice[sync];
* isn't valid until the first request from the dispatch is activated
* and the slice time set.
*/
-static inline int cfq_slice_used(struct cfq_queue *cfqq)
+static inline bool cfq_slice_used(struct cfq_queue *cfqq)
{
if (cfq_cfqq_slice_new(cfqq))
return 0;
* we will service the queues.
*/
static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- int add_front)
+ bool add_front)
{
struct rb_node **p, *parent;
struct cfq_queue *__cfqq;
} else
rb_key += jiffies;
} else if (!add_front) {
+ /*
+ * Get our rb key offset. Subtract any residual slice
+ * value carried from last service. A negative resid
+ * count indicates slice overrun, and this should position
+ * the next service time further away in the tree.
+ */
rb_key = cfq_slice_offset(cfqd, cfqq) + jiffies;
- rb_key += cfqq->slice_resid;
+ rb_key -= cfqq->slice_resid;
cfqq->slice_resid = 0;
- } else
- rb_key = 0;
+ } else {
+ rb_key = -HZ;
+ __cfqq = cfq_rb_first(&cfqd->service_tree);
+ rb_key += __cfqq ? __cfqq->rb_key : jiffies;
+ }
if (!RB_EMPTY_NODE(&cfqq->rb_node)) {
/*
n = &(*p)->rb_left;
else if (cfq_class_idle(cfqq) > cfq_class_idle(__cfqq))
n = &(*p)->rb_right;
- else if (rb_key < __cfqq->rb_key)
+ else if (time_before(rb_key, __cfqq->rb_key))
n = &(*p)->rb_left;
else
n = &(*p)->rb_right;
* reposition in fifo if next is older than rq
*/
if (!list_empty(&rq->queuelist) && !list_empty(&next->queuelist) &&
- time_before(next->start_time, rq->start_time))
+ time_before(rq_fifo_time(next), rq_fifo_time(rq))) {
list_move(&rq->queuelist, &next->queuelist);
+ rq_set_fifo_time(rq, rq_fifo_time(next));
+ }
cfq_remove_request(next);
}
* Disallow merge of a sync bio into an async request.
*/
if (cfq_bio_sync(bio) && !rq_is_sync(rq))
- return 0;
+ return false;
/*
* Lookup the cfqq that this bio will be queued with. Allow
*/
cic = cfq_cic_lookup(cfqd, current->io_context);
if (!cic)
- return 0;
+ return false;
cfqq = cic_to_cfqq(cic, cfq_bio_sync(bio));
- if (cfqq == RQ_CFQQ(rq))
- return 1;
-
- return 0;
+ return cfqq == RQ_CFQQ(rq);
}
static void __cfq_set_active_queue(struct cfq_data *cfqd,
*/
static void
__cfq_slice_expired(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- int timed_out)
+ bool timed_out)
{
cfq_log_cfqq(cfqd, cfqq, "slice expired t=%d", timed_out);
}
}
-static inline void cfq_slice_expired(struct cfq_data *cfqd, int timed_out)
+static inline void cfq_slice_expired(struct cfq_data *cfqd, bool timed_out)
{
struct cfq_queue *cfqq = cfqd->active_queue;
{
if (!cfqq) {
cfqq = cfq_get_next_queue(cfqd);
- if (cfqq)
+ if (cfqq && !cfq_cfqq_coop_preempt(cfqq))
cfq_clear_cfqq_coop(cfqq);
}
+ if (cfqq)
+ cfq_clear_cfqq_coop_preempt(cfqq);
+
__cfq_set_active_queue(cfqd, cfqq);
return cfqq;
}
*/
static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
struct cfq_queue *cur_cfqq,
- int probe)
+ bool probe)
{
struct cfq_queue *cfqq;
if (!cic || !atomic_read(&cic->ioc->nr_tasks))
return;
+ /*
+ * If our average think time is larger than the remaining time
+ * slice, then don't idle. This avoids overrunning the allotted
+ * time slice.
+ */
+ if (sample_valid(cic->ttime_samples) &&
+ (cfqq->slice_end - jiffies < cic->ttime_mean))
+ return;
+
cfq_mark_cfqq_wait_request(cfqq);
/*
*/
static struct request *cfq_check_fifo(struct cfq_queue *cfqq)
{
- struct cfq_data *cfqd = cfqq->cfqd;
- struct request *rq;
- int fifo;
+ struct request *rq = NULL;
if (cfq_cfqq_fifo_expire(cfqq))
return NULL;
if (list_empty(&cfqq->fifo))
return NULL;
- fifo = cfq_cfqq_sync(cfqq);
rq = rq_entry_fifo(cfqq->fifo.next);
-
- if (time_before(jiffies, rq->start_time + cfqd->cfq_fifo_expire[fifo]))
+ if (time_before(jiffies, rq_fifo_time(rq)))
rq = NULL;
- cfq_log_cfqq(cfqd, cfqq, "fifo=%p", rq);
+ cfq_log_cfqq(cfqq->cfqd, cfqq, "fifo=%p", rq);
return rq;
}
return dispatched;
}
+static bool cfq_may_dispatch(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+ unsigned int max_dispatch;
+
+ /*
+ * Drain async requests before we start sync IO
+ */
+ if (cfq_cfqq_idle_window(cfqq) && cfqd->rq_in_driver[BLK_RW_ASYNC])
+ return false;
+
+ /*
+ * If this is an async queue and we have sync IO in flight, let it wait
+ */
+ if (cfqd->sync_flight && !cfq_cfqq_sync(cfqq))
+ return false;
+
+ max_dispatch = cfqd->cfq_quantum;
+ if (cfq_class_idle(cfqq))
+ max_dispatch = 1;
+
+ /*
+ * Does this cfqq already have too much IO in flight?
+ */
+ if (cfqq->dispatched >= max_dispatch) {
+ /*
+ * idle queue must always only have a single IO in flight
+ */
+ if (cfq_class_idle(cfqq))
+ return false;
+
+ /*
+ * We have other queues, don't allow more IO from this one
+ */
+ if (cfqd->busy_queues > 1)
+ return false;
+
+ /*
+ * Sole queue user, allow bigger slice
+ */
+ max_dispatch *= 4;
+ }
+
+ /*
+ * Async queues must wait a bit before being allowed dispatch.
+ * We also ramp up the dispatch depth gradually for async IO,
+ * based on the last sync IO we serviced
+ */
+ if (!cfq_cfqq_sync(cfqq) && cfqd->cfq_latency) {
+ unsigned long last_sync = jiffies - cfqd->last_end_sync_rq;
+ unsigned int depth;
+
+ depth = last_sync / cfqd->cfq_slice[1];
+ if (!depth && !cfqq->dispatched)
+ depth = 1;
+ if (depth < max_dispatch)
+ max_dispatch = depth;
+ }
+
+ /*
+ * If we're below the current max, allow a dispatch
+ */
+ return cfqq->dispatched < max_dispatch;
+}
+
/*
* Dispatch a request from cfqq, moving them to the request queue
* dispatch list.
*/
-static void cfq_dispatch_request(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+static bool cfq_dispatch_request(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
struct request *rq;
BUG_ON(RB_EMPTY_ROOT(&cfqq->sort_list));
+ if (!cfq_may_dispatch(cfqd, cfqq))
+ return false;
+
/*
* follow expired path, else get first next available
*/
atomic_long_inc(&cic->ioc->refcount);
cfqd->active_cic = cic;
}
+
+ return true;
}
/*
{
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_queue *cfqq;
- unsigned int max_dispatch;
if (!cfqd->busy_queues)
return 0;
return 0;
/*
- * Drain async requests before we start sync IO
- */
- if (cfq_cfqq_idle_window(cfqq) && cfqd->rq_in_driver[BLK_RW_ASYNC])
- return 0;
-
- /*
- * If this is an async queue and we have sync IO in flight, let it wait
+ * Dispatch a request from this cfqq, if it is allowed
*/
- if (cfqd->sync_flight && !cfq_cfqq_sync(cfqq))
+ if (!cfq_dispatch_request(cfqd, cfqq))
return 0;
- max_dispatch = cfqd->cfq_quantum;
- if (cfq_class_idle(cfqq))
- max_dispatch = 1;
-
- /*
- * Does this cfqq already have too much IO in flight?
- */
- if (cfqq->dispatched >= max_dispatch) {
- /*
- * idle queue must always only have a single IO in flight
- */
- if (cfq_class_idle(cfqq))
- return 0;
-
- /*
- * We have other queues, don't allow more IO from this one
- */
- if (cfqd->busy_queues > 1)
- return 0;
-
- /*
- * we are the only queue, allow up to 4 times of 'quantum'
- */
- if (cfqq->dispatched >= 4 * max_dispatch)
- return 0;
- }
-
- /*
- * Dispatch a request from this cfqq
- */
- cfq_dispatch_request(cfqd, cfqq);
cfqq->slice_dispatch++;
cfq_clear_cfqq_must_dispatch(cfqq);
}
static void cfq_init_cfqq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
- pid_t pid, int is_sync)
+ pid_t pid, bool is_sync)
{
RB_CLEAR_NODE(&cfqq->rb_node);
RB_CLEAR_NODE(&cfqq->p_node);
}
static struct cfq_queue *
-cfq_find_alloc_queue(struct cfq_data *cfqd, int is_sync,
+cfq_find_alloc_queue(struct cfq_data *cfqd, bool is_sync,
struct io_context *ioc, gfp_t gfp_mask)
{
struct cfq_queue *cfqq, *new_cfqq = NULL;
}
static struct cfq_queue *
-cfq_get_queue(struct cfq_data *cfqd, int is_sync, struct io_context *ioc,
+cfq_get_queue(struct cfq_data *cfqd, bool is_sync, struct io_context *ioc,
gfp_t gfp_mask)
{
const int ioprio = task_ioprio(ioc);
enable_idle = old_idle = cfq_cfqq_idle_window(cfqq);
if (!atomic_read(&cic->ioc->nr_tasks) || !cfqd->cfq_slice_idle ||
- (cfqd->hw_tag && CIC_SEEKY(cic)))
+ (!cfqd->cfq_latency && cfqd->hw_tag && CIC_SEEKY(cic)))
enable_idle = 0;
else if (sample_valid(cic->ttime_samples)) {
- if (cic->ttime_mean > cfqd->cfq_slice_idle)
+ unsigned int slice_idle = cfqd->cfq_slice_idle;
+ if (sample_valid(cic->seek_samples) && CIC_SEEKY(cic))
+ slice_idle = msecs_to_jiffies(CFQ_MIN_TT);
+ if (cic->ttime_mean > slice_idle)
enable_idle = 0;
else
enable_idle = 1;
* Check if new_cfqq should preempt the currently active queue. Return 0 for
* no or if we aren't sure, a 1 will cause a preempt.
*/
-static int
+static bool
cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq,
struct request *rq)
{
cfqq = cfqd->active_queue;
if (!cfqq)
- return 0;
+ return false;
if (cfq_slice_used(cfqq))
- return 1;
+ return true;
if (cfq_class_idle(new_cfqq))
- return 0;
+ return false;
if (cfq_class_idle(cfqq))
- return 1;
+ return true;
/*
* if the new request is sync, but the currently running queue is
* not, let the sync request have priority.
*/
if (rq_is_sync(rq) && !cfq_cfqq_sync(cfqq))
- return 1;
+ return true;
/*
* So both queues are sync. Let the new request get disk time if
* it's a metadata request and the current queue is doing regular IO.
*/
if (rq_is_meta(rq) && !cfqq->meta_pending)
- return 1;
+ return true;
/*
* Allow an RT request to pre-empt an ongoing non-RT cfqq timeslice.
*/
if (cfq_class_rt(new_cfqq) && !cfq_class_rt(cfqq))
- return 1;
+ return true;
if (!cfqd->active_cic || !cfq_cfqq_wait_request(cfqq))
- return 0;
+ return false;
/*
* if this request is as-good as one we would expect from the
* current cfqq, let it preempt
*/
- if (cfq_rq_close(cfqd, rq))
- return 1;
+ if (cfq_rq_close(cfqd, rq) && (!cfq_cfqq_coop(new_cfqq) ||
+ cfqd->busy_queues == 1)) {
+ /*
+ * Mark new queue coop_preempt, so its coop flag will not be
+ * cleared when new queue gets scheduled at the very first time
+ */
+ cfq_mark_cfqq_coop_preempt(new_cfqq);
+ cfq_mark_cfqq_coop(new_cfqq);
+ return true;
+ }
- return 0;
+ return false;
}
/*
cfq_add_rq_rb(rq);
+ rq_set_fifo_time(rq, jiffies + cfqd->cfq_fifo_expire[rq_is_sync(rq)]);
list_add_tail(&rq->queuelist, &cfqq->fifo);
cfq_rq_enqueued(cfqd, cfqq, rq);
if (cfq_cfqq_sync(cfqq))
cfqd->sync_flight--;
- if (sync)
+ if (sync) {
RQ_CIC(rq)->last_end_request = now;
+ cfqd->last_end_sync_rq = now;
+ }
/*
* If this is the active queue, check if it needs to be expired,
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_io_context *cic;
const int rw = rq_data_dir(rq);
- const int is_sync = rq_is_sync(rq);
+ const bool is_sync = rq_is_sync(rq);
struct cfq_queue *cfqq;
unsigned long flags;
cfqd->cfq_slice[1] = cfq_slice_sync;
cfqd->cfq_slice_async_rq = cfq_slice_async_rq;
cfqd->cfq_slice_idle = cfq_slice_idle;
+ cfqd->cfq_latency = 1;
cfqd->hw_tag = 1;
-
+ cfqd->last_end_sync_rq = jiffies;
return cfqd;
}
SHOW_FUNCTION(cfq_slice_sync_show, cfqd->cfq_slice[1], 1);
SHOW_FUNCTION(cfq_slice_async_show, cfqd->cfq_slice[0], 1);
SHOW_FUNCTION(cfq_slice_async_rq_show, cfqd->cfq_slice_async_rq, 0);
+SHOW_FUNCTION(cfq_low_latency_show, cfqd->cfq_latency, 0);
#undef SHOW_FUNCTION
#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV) \
STORE_FUNCTION(cfq_slice_async_store, &cfqd->cfq_slice[0], 1, UINT_MAX, 1);
STORE_FUNCTION(cfq_slice_async_rq_store, &cfqd->cfq_slice_async_rq, 1,
UINT_MAX, 0);
+STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
#undef STORE_FUNCTION
#define CFQ_ATTR(name) \
CFQ_ATTR(slice_async),
CFQ_ATTR(slice_async_rq),
CFQ_ATTR(slice_idle),
+ CFQ_ATTR(low_latency),
__ATTR_NULL
};
return put_user(val, (compat_int_t __user *)compat_ptr(arg));
}
+static int compat_put_uint(unsigned long arg, unsigned int val)
+{
+ return put_user(val, (compat_uint_t __user *)compat_ptr(arg));
+}
+
static int compat_put_long(unsigned long arg, long val)
{
return put_user(val, (compat_long_t __user *)compat_ptr(arg));
switch (cmd) {
case HDIO_GETGEO:
return compat_hdio_getgeo(disk, bdev, compat_ptr(arg));
+ case BLKPBSZGET:
+ return compat_put_uint(arg, bdev_physical_block_size(bdev));
+ case BLKIOMIN:
+ return compat_put_uint(arg, bdev_io_min(bdev));
+ case BLKIOOPT:
+ return compat_put_uint(arg, bdev_io_opt(bdev));
+ case BLKALIGNOFF:
+ return compat_put_int(arg, bdev_alignment_offset(bdev));
case BLKFLSBUF:
case BLKROSET:
case BLKDISCARD:
return count;
strlcpy(elevator_name, name, sizeof(elevator_name));
- strstrip(elevator_name);
-
- e = elevator_get(elevator_name);
+ e = elevator_get(strstrip(elevator_name));
if (!e) {
printk(KERN_ERR "elevator: type %s not found\n", elevator_name);
return -EINVAL;
return put_user(val, (int __user *)arg);
}
+static int put_uint(unsigned long arg, unsigned int val)
+{
+ return put_user(val, (unsigned int __user *)arg);
+}
+
static int put_long(unsigned long arg, long val)
{
return put_user(val, (long __user *)arg);
return put_long(arg, (bdi->ra_pages * PAGE_CACHE_SIZE) / 512);
case BLKROGET:
return put_int(arg, bdev_read_only(bdev) != 0);
- case BLKBSZGET: /* get the logical block size (cf. BLKSSZGET) */
+ case BLKBSZGET: /* get block device soft block size (cf. BLKSSZGET) */
return put_int(arg, block_size(bdev));
- case BLKSSZGET: /* get block device hardware sector size */
+ case BLKSSZGET: /* get block device logical block size */
return put_int(arg, bdev_logical_block_size(bdev));
+ case BLKPBSZGET: /* get block device physical block size */
+ return put_uint(arg, bdev_physical_block_size(bdev));
+ case BLKIOMIN:
+ return put_uint(arg, bdev_io_min(bdev));
+ case BLKIOOPT:
+ return put_uint(arg, bdev_io_opt(bdev));
+ case BLKALIGNOFF:
+ return put_int(arg, bdev_alignment_offset(bdev));
case BLKSECTGET:
return put_ushort(arg, queue_max_sectors(bdev_get_queue(bdev)));
case BLKRASET:
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/rtnetlink.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
tristate
select ASYNC_CORE
+config ASYNC_PQ
+ tristate
+ select ASYNC_CORE
+
+config ASYNC_RAID6_RECOV
+ tristate
+ select ASYNC_CORE
+ select ASYNC_PQ
+
obj-$(CONFIG_ASYNC_MEMCPY) += async_memcpy.o
obj-$(CONFIG_ASYNC_MEMSET) += async_memset.o
obj-$(CONFIG_ASYNC_XOR) += async_xor.o
+obj-$(CONFIG_ASYNC_PQ) += async_pq.o
+obj-$(CONFIG_ASYNC_RAID6_RECOV) += async_raid6_recov.o
+obj-$(CONFIG_ASYNC_RAID6_TEST) += raid6test.o
* async_memcpy - attempt to copy memory with a dma engine.
* @dest: destination page
* @src: src page
- * @offset: offset in pages to start transaction
+ * @dest_offset: offset into 'dest' to start transaction
+ * @src_offset: offset into 'src' to start transaction
* @len: length in bytes
- * @flags: ASYNC_TX_ACK, ASYNC_TX_DEP_ACK,
- * @depend_tx: memcpy depends on the result of this transaction
- * @cb_fn: function to call when the memcpy completes
- * @cb_param: parameter to pass to the callback routine
+ * @submit: submission / completion modifiers
+ *
+ * honored flags: ASYNC_TX_ACK
*/
struct dma_async_tx_descriptor *
async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
- unsigned int src_offset, size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+ unsigned int src_offset, size_t len,
+ struct async_submit_ctl *submit)
{
- struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_MEMCPY,
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_MEMCPY,
&dest, 1, &src, 1, len);
struct dma_device *device = chan ? chan->device : NULL;
struct dma_async_tx_descriptor *tx = NULL;
- if (device) {
+ if (device && is_dma_copy_aligned(device, src_offset, dest_offset, len)) {
dma_addr_t dma_dest, dma_src;
- unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
+ unsigned long dma_prep_flags = 0;
+ if (submit->cb_fn)
+ dma_prep_flags |= DMA_PREP_INTERRUPT;
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_prep_flags |= DMA_PREP_FENCE;
dma_dest = dma_map_page(device->dev, dest, dest_offset, len,
DMA_FROM_DEVICE);
if (tx) {
pr_debug("%s: (async) len: %zu\n", __func__, len);
- async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+ async_tx_submit(chan, tx, submit);
} else {
void *dest_buf, *src_buf;
pr_debug("%s: (sync) len: %zu\n", __func__, len);
/* wait for any prerequisite operations */
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
dest_buf = kmap_atomic(dest, KM_USER0) + dest_offset;
src_buf = kmap_atomic(src, KM_USER1) + src_offset;
kunmap_atomic(dest_buf, KM_USER0);
kunmap_atomic(src_buf, KM_USER1);
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
}
return tx;
}
EXPORT_SYMBOL_GPL(async_memcpy);
-static int __init async_memcpy_init(void)
-{
- return 0;
-}
-
-static void __exit async_memcpy_exit(void)
-{
- do { } while (0);
-}
-
-module_init(async_memcpy_init);
-module_exit(async_memcpy_exit);
-
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("asynchronous memcpy api");
MODULE_LICENSE("GPL");
* @val: fill value
* @offset: offset in pages to start transaction
* @len: length in bytes
- * @flags: ASYNC_TX_ACK, ASYNC_TX_DEP_ACK
- * @depend_tx: memset depends on the result of this transaction
- * @cb_fn: function to call when the memcpy completes
- * @cb_param: parameter to pass to the callback routine
+ *
+ * honored flags: ASYNC_TX_ACK
*/
struct dma_async_tx_descriptor *
-async_memset(struct page *dest, int val, unsigned int offset,
- size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+async_memset(struct page *dest, int val, unsigned int offset, size_t len,
+ struct async_submit_ctl *submit)
{
- struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_MEMSET,
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_MEMSET,
&dest, 1, NULL, 0, len);
struct dma_device *device = chan ? chan->device : NULL;
struct dma_async_tx_descriptor *tx = NULL;
- if (device) {
+ if (device && is_dma_fill_aligned(device, offset, 0, len)) {
dma_addr_t dma_dest;
- unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
+ unsigned long dma_prep_flags = 0;
+ if (submit->cb_fn)
+ dma_prep_flags |= DMA_PREP_INTERRUPT;
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_prep_flags |= DMA_PREP_FENCE;
dma_dest = dma_map_page(device->dev, dest, offset, len,
DMA_FROM_DEVICE);
if (tx) {
pr_debug("%s: (async) len: %zu\n", __func__, len);
- async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+ async_tx_submit(chan, tx, submit);
} else { /* run the memset synchronously */
void *dest_buf;
pr_debug("%s: (sync) len: %zu\n", __func__, len);
- dest_buf = (void *) (((char *) page_address(dest)) + offset);
+ dest_buf = page_address(dest) + offset;
/* wait for any prerequisite operations */
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
memset(dest_buf, val, len);
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
}
return tx;
}
EXPORT_SYMBOL_GPL(async_memset);
-static int __init async_memset_init(void)
-{
- return 0;
-}
-
-static void __exit async_memset_exit(void)
-{
- do { } while (0);
-}
-
-module_init(async_memset_init);
-module_exit(async_memset_exit);
-
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("asynchronous memset api");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright(c) 2007 Yuri Tikhonov <yur@emcraft.com>
+ * Copyright(c) 2009 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/raid/pq.h>
+#include <linux/async_tx.h>
+
+/**
+ * pq_scribble_page - space to hold throwaway P or Q buffer for
+ * synchronous gen_syndrome
+ */
+static struct page *pq_scribble_page;
+
+/* the struct page *blocks[] parameter passed to async_gen_syndrome()
+ * and async_syndrome_val() contains the 'P' destination address at
+ * blocks[disks-2] and the 'Q' destination address at blocks[disks-1]
+ *
+ * note: these are macros as they are used as lvalues
+ */
+#define P(b, d) (b[d-2])
+#define Q(b, d) (b[d-1])
+
+/**
+ * do_async_gen_syndrome - asynchronously calculate P and/or Q
+ */
+static __async_inline struct dma_async_tx_descriptor *
+do_async_gen_syndrome(struct dma_chan *chan, struct page **blocks,
+ const unsigned char *scfs, unsigned int offset, int disks,
+ size_t len, dma_addr_t *dma_src,
+ struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct dma_device *dma = chan->device;
+ enum dma_ctrl_flags dma_flags = 0;
+ enum async_tx_flags flags_orig = submit->flags;
+ dma_async_tx_callback cb_fn_orig = submit->cb_fn;
+ dma_async_tx_callback cb_param_orig = submit->cb_param;
+ int src_cnt = disks - 2;
+ unsigned char coefs[src_cnt];
+ unsigned short pq_src_cnt;
+ dma_addr_t dma_dest[2];
+ int src_off = 0;
+ int idx;
+ int i;
+
+ /* DMAs use destinations as sources, so use BIDIRECTIONAL mapping */
+ if (P(blocks, disks))
+ dma_dest[0] = dma_map_page(dma->dev, P(blocks, disks), offset,
+ len, DMA_BIDIRECTIONAL);
+ else
+ dma_flags |= DMA_PREP_PQ_DISABLE_P;
+ if (Q(blocks, disks))
+ dma_dest[1] = dma_map_page(dma->dev, Q(blocks, disks), offset,
+ len, DMA_BIDIRECTIONAL);
+ else
+ dma_flags |= DMA_PREP_PQ_DISABLE_Q;
+
+ /* convert source addresses being careful to collapse 'empty'
+ * sources and update the coefficients accordingly
+ */
+ for (i = 0, idx = 0; i < src_cnt; i++) {
+ if (blocks[i] == NULL)
+ continue;
+ dma_src[idx] = dma_map_page(dma->dev, blocks[i], offset, len,
+ DMA_TO_DEVICE);
+ coefs[idx] = scfs[i];
+ idx++;
+ }
+ src_cnt = idx;
+
+ while (src_cnt > 0) {
+ submit->flags = flags_orig;
+ pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
+ /* if we are submitting additional pqs, leave the chain open,
+ * clear the callback parameters, and leave the destination
+ * buffers mapped
+ */
+ if (src_cnt > pq_src_cnt) {
+ submit->flags &= ~ASYNC_TX_ACK;
+ submit->flags |= ASYNC_TX_FENCE;
+ dma_flags |= DMA_COMPL_SKIP_DEST_UNMAP;
+ submit->cb_fn = NULL;
+ submit->cb_param = NULL;
+ } else {
+ dma_flags &= ~DMA_COMPL_SKIP_DEST_UNMAP;
+ submit->cb_fn = cb_fn_orig;
+ submit->cb_param = cb_param_orig;
+ if (cb_fn_orig)
+ dma_flags |= DMA_PREP_INTERRUPT;
+ }
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
+
+ /* Since we have clobbered the src_list we are committed
+ * to doing this asynchronously. Drivers force forward
+ * progress in case they can not provide a descriptor
+ */
+ for (;;) {
+ tx = dma->device_prep_dma_pq(chan, dma_dest,
+ &dma_src[src_off],
+ pq_src_cnt,
+ &coefs[src_off], len,
+ dma_flags);
+ if (likely(tx))
+ break;
+ async_tx_quiesce(&submit->depend_tx);
+ dma_async_issue_pending(chan);
+ }
+
+ async_tx_submit(chan, tx, submit);
+ submit->depend_tx = tx;
+
+ /* drop completed sources */
+ src_cnt -= pq_src_cnt;
+ src_off += pq_src_cnt;
+
+ dma_flags |= DMA_PREP_CONTINUE;
+ }
+
+ return tx;
+}
+
+/**
+ * do_sync_gen_syndrome - synchronously calculate a raid6 syndrome
+ */
+static void
+do_sync_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
+ size_t len, struct async_submit_ctl *submit)
+{
+ void **srcs;
+ int i;
+
+ if (submit->scribble)
+ srcs = submit->scribble;
+ else
+ srcs = (void **) blocks;
+
+ for (i = 0; i < disks; i++) {
+ if (blocks[i] == NULL) {
+ BUG_ON(i > disks - 3); /* P or Q can't be zero */
+ srcs[i] = (void*)raid6_empty_zero_page;
+ } else
+ srcs[i] = page_address(blocks[i]) + offset;
+ }
+ raid6_call.gen_syndrome(disks, len, srcs);
+ async_tx_sync_epilog(submit);
+}
+
+/**
+ * async_gen_syndrome - asynchronously calculate a raid6 syndrome
+ * @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1
+ * @offset: common offset into each block (src and dest) to start transaction
+ * @disks: number of blocks (including missing P or Q, see below)
+ * @len: length of operation in bytes
+ * @submit: submission/completion modifiers
+ *
+ * General note: This routine assumes a field of GF(2^8) with a
+ * primitive polynomial of 0x11d and a generator of {02}.
+ *
+ * 'disks' note: callers can optionally omit either P or Q (but not
+ * both) from the calculation by setting blocks[disks-2] or
+ * blocks[disks-1] to NULL. When P or Q is omitted 'len' must be <=
+ * PAGE_SIZE as a temporary buffer of this size is used in the
+ * synchronous path. 'disks' always accounts for both destination
+ * buffers. If any source buffers (blocks[i] where i < disks - 2) are
+ * set to NULL those buffers will be replaced with the raid6_zero_page
+ * in the synchronous path and omitted in the hardware-asynchronous
+ * path.
+ *
+ * 'blocks' note: if submit->scribble is NULL then the contents of
+ * 'blocks' may be overwritten to perform address conversions
+ * (dma_map_page() or page_address()).
+ */
+struct dma_async_tx_descriptor *
+async_gen_syndrome(struct page **blocks, unsigned int offset, int disks,
+ size_t len, struct async_submit_ctl *submit)
+{
+ int src_cnt = disks - 2;
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ,
+ &P(blocks, disks), 2,
+ blocks, src_cnt, len);
+ struct dma_device *device = chan ? chan->device : NULL;
+ dma_addr_t *dma_src = NULL;
+
+ BUG_ON(disks > 255 || !(P(blocks, disks) || Q(blocks, disks)));
+
+ if (submit->scribble)
+ dma_src = submit->scribble;
+ else if (sizeof(dma_addr_t) <= sizeof(struct page *))
+ dma_src = (dma_addr_t *) blocks;
+
+ if (dma_src && device &&
+ (src_cnt <= dma_maxpq(device, 0) ||
+ dma_maxpq(device, DMA_PREP_CONTINUE) > 0) &&
+ is_dma_pq_aligned(device, offset, 0, len)) {
+ /* run the p+q asynchronously */
+ pr_debug("%s: (async) disks: %d len: %zu\n",
+ __func__, disks, len);
+ return do_async_gen_syndrome(chan, blocks, raid6_gfexp, offset,
+ disks, len, dma_src, submit);
+ }
+
+ /* run the pq synchronously */
+ pr_debug("%s: (sync) disks: %d len: %zu\n", __func__, disks, len);
+
+ /* wait for any prerequisite operations */
+ async_tx_quiesce(&submit->depend_tx);
+
+ if (!P(blocks, disks)) {
+ P(blocks, disks) = pq_scribble_page;
+ BUG_ON(len + offset > PAGE_SIZE);
+ }
+ if (!Q(blocks, disks)) {
+ Q(blocks, disks) = pq_scribble_page;
+ BUG_ON(len + offset > PAGE_SIZE);
+ }
+ do_sync_gen_syndrome(blocks, offset, disks, len, submit);
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(async_gen_syndrome);
+
+/**
+ * async_syndrome_val - asynchronously validate a raid6 syndrome
+ * @blocks: source blocks from idx 0..disks-3, P @ disks-2 and Q @ disks-1
+ * @offset: common offset into each block (src and dest) to start transaction
+ * @disks: number of blocks (including missing P or Q, see below)
+ * @len: length of operation in bytes
+ * @pqres: on val failure SUM_CHECK_P_RESULT and/or SUM_CHECK_Q_RESULT are set
+ * @spare: temporary result buffer for the synchronous case
+ * @submit: submission / completion modifiers
+ *
+ * The same notes from async_gen_syndrome apply to the 'blocks',
+ * and 'disks' parameters of this routine. The synchronous path
+ * requires a temporary result buffer and submit->scribble to be
+ * specified.
+ */
+struct dma_async_tx_descriptor *
+async_syndrome_val(struct page **blocks, unsigned int offset, int disks,
+ size_t len, enum sum_check_flags *pqres, struct page *spare,
+ struct async_submit_ctl *submit)
+{
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ_VAL,
+ NULL, 0, blocks, disks,
+ len);
+ struct dma_device *device = chan ? chan->device : NULL;
+ struct dma_async_tx_descriptor *tx;
+ unsigned char coefs[disks-2];
+ enum dma_ctrl_flags dma_flags = submit->cb_fn ? DMA_PREP_INTERRUPT : 0;
+ dma_addr_t *dma_src = NULL;
+ int src_cnt = 0;
+
+ BUG_ON(disks < 4);
+
+ if (submit->scribble)
+ dma_src = submit->scribble;
+ else if (sizeof(dma_addr_t) <= sizeof(struct page *))
+ dma_src = (dma_addr_t *) blocks;
+
+ if (dma_src && device && disks <= dma_maxpq(device, 0) &&
+ is_dma_pq_aligned(device, offset, 0, len)) {
+ struct device *dev = device->dev;
+ dma_addr_t *pq = &dma_src[disks-2];
+ int i;
+
+ pr_debug("%s: (async) disks: %d len: %zu\n",
+ __func__, disks, len);
+ if (!P(blocks, disks))
+ dma_flags |= DMA_PREP_PQ_DISABLE_P;
+ else
+ pq[0] = dma_map_page(dev, P(blocks, disks),
+ offset, len,
+ DMA_TO_DEVICE);
+ if (!Q(blocks, disks))
+ dma_flags |= DMA_PREP_PQ_DISABLE_Q;
+ else
+ pq[1] = dma_map_page(dev, Q(blocks, disks),
+ offset, len,
+ DMA_TO_DEVICE);
+
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
+ for (i = 0; i < disks-2; i++)
+ if (likely(blocks[i])) {
+ dma_src[src_cnt] = dma_map_page(dev, blocks[i],
+ offset, len,
+ DMA_TO_DEVICE);
+ coefs[src_cnt] = raid6_gfexp[i];
+ src_cnt++;
+ }
+
+ for (;;) {
+ tx = device->device_prep_dma_pq_val(chan, pq, dma_src,
+ src_cnt,
+ coefs,
+ len, pqres,
+ dma_flags);
+ if (likely(tx))
+ break;
+ async_tx_quiesce(&submit->depend_tx);
+ dma_async_issue_pending(chan);
+ }
+ async_tx_submit(chan, tx, submit);
+
+ return tx;
+ } else {
+ struct page *p_src = P(blocks, disks);
+ struct page *q_src = Q(blocks, disks);
+ enum async_tx_flags flags_orig = submit->flags;
+ dma_async_tx_callback cb_fn_orig = submit->cb_fn;
+ void *scribble = submit->scribble;
+ void *cb_param_orig = submit->cb_param;
+ void *p, *q, *s;
+
+ pr_debug("%s: (sync) disks: %d len: %zu\n",
+ __func__, disks, len);
+
+ /* caller must provide a temporary result buffer and
+ * allow the input parameters to be preserved
+ */
+ BUG_ON(!spare || !scribble);
+
+ /* wait for any prerequisite operations */
+ async_tx_quiesce(&submit->depend_tx);
+
+ /* recompute p and/or q into the temporary buffer and then
+ * check to see the result matches the current value
+ */
+ tx = NULL;
+ *pqres = 0;
+ if (p_src) {
+ init_async_submit(submit, ASYNC_TX_XOR_ZERO_DST, NULL,
+ NULL, NULL, scribble);
+ tx = async_xor(spare, blocks, offset, disks-2, len, submit);
+ async_tx_quiesce(&tx);
+ p = page_address(p_src) + offset;
+ s = page_address(spare) + offset;
+ *pqres |= !!memcmp(p, s, len) << SUM_CHECK_P;
+ }
+
+ if (q_src) {
+ P(blocks, disks) = NULL;
+ Q(blocks, disks) = spare;
+ init_async_submit(submit, 0, NULL, NULL, NULL, scribble);
+ tx = async_gen_syndrome(blocks, offset, disks, len, submit);
+ async_tx_quiesce(&tx);
+ q = page_address(q_src) + offset;
+ s = page_address(spare) + offset;
+ *pqres |= !!memcmp(q, s, len) << SUM_CHECK_Q;
+ }
+
+ /* restore P, Q and submit */
+ P(blocks, disks) = p_src;
+ Q(blocks, disks) = q_src;
+
+ submit->cb_fn = cb_fn_orig;
+ submit->cb_param = cb_param_orig;
+ submit->flags = flags_orig;
+ async_tx_sync_epilog(submit);
+
+ return NULL;
+ }
+}
+EXPORT_SYMBOL_GPL(async_syndrome_val);
+
+static int __init async_pq_init(void)
+{
+ pq_scribble_page = alloc_page(GFP_KERNEL);
+
+ if (pq_scribble_page)
+ return 0;
+
+ pr_err("%s: failed to allocate required spare page\n", __func__);
+
+ return -ENOMEM;
+}
+
+static void __exit async_pq_exit(void)
+{
+ put_page(pq_scribble_page);
+}
+
+module_init(async_pq_init);
+module_exit(async_pq_exit);
+
+MODULE_DESCRIPTION("asynchronous raid6 syndrome generation/validation");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Asynchronous RAID-6 recovery calculations ASYNC_TX API.
+ * Copyright(c) 2009 Intel Corporation
+ *
+ * based on raid6recov.c:
+ * Copyright 2002 H. Peter Anvin
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 51
+ * Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/raid/pq.h>
+#include <linux/async_tx.h>
+
+static struct dma_async_tx_descriptor *
+async_sum_product(struct page *dest, struct page **srcs, unsigned char *coef,
+ size_t len, struct async_submit_ctl *submit)
+{
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ,
+ &dest, 1, srcs, 2, len);
+ struct dma_device *dma = chan ? chan->device : NULL;
+ const u8 *amul, *bmul;
+ u8 ax, bx;
+ u8 *a, *b, *c;
+
+ if (dma) {
+ dma_addr_t dma_dest[2];
+ dma_addr_t dma_src[2];
+ struct device *dev = dma->dev;
+ struct dma_async_tx_descriptor *tx;
+ enum dma_ctrl_flags dma_flags = DMA_PREP_PQ_DISABLE_P;
+
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
+ dma_dest[1] = dma_map_page(dev, dest, 0, len, DMA_BIDIRECTIONAL);
+ dma_src[0] = dma_map_page(dev, srcs[0], 0, len, DMA_TO_DEVICE);
+ dma_src[1] = dma_map_page(dev, srcs[1], 0, len, DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_pq(chan, dma_dest, dma_src, 2, coef,
+ len, dma_flags);
+ if (tx) {
+ async_tx_submit(chan, tx, submit);
+ return tx;
+ }
+
+ /* could not get a descriptor, unmap and fall through to
+ * the synchronous path
+ */
+ dma_unmap_page(dev, dma_dest[1], len, DMA_BIDIRECTIONAL);
+ dma_unmap_page(dev, dma_src[0], len, DMA_TO_DEVICE);
+ dma_unmap_page(dev, dma_src[1], len, DMA_TO_DEVICE);
+ }
+
+ /* run the operation synchronously */
+ async_tx_quiesce(&submit->depend_tx);
+ amul = raid6_gfmul[coef[0]];
+ bmul = raid6_gfmul[coef[1]];
+ a = page_address(srcs[0]);
+ b = page_address(srcs[1]);
+ c = page_address(dest);
+
+ while (len--) {
+ ax = amul[*a++];
+ bx = bmul[*b++];
+ *c++ = ax ^ bx;
+ }
+
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *
+async_mult(struct page *dest, struct page *src, u8 coef, size_t len,
+ struct async_submit_ctl *submit)
+{
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_PQ,
+ &dest, 1, &src, 1, len);
+ struct dma_device *dma = chan ? chan->device : NULL;
+ const u8 *qmul; /* Q multiplier table */
+ u8 *d, *s;
+
+ if (dma) {
+ dma_addr_t dma_dest[2];
+ dma_addr_t dma_src[1];
+ struct device *dev = dma->dev;
+ struct dma_async_tx_descriptor *tx;
+ enum dma_ctrl_flags dma_flags = DMA_PREP_PQ_DISABLE_P;
+
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
+ dma_dest[1] = dma_map_page(dev, dest, 0, len, DMA_BIDIRECTIONAL);
+ dma_src[0] = dma_map_page(dev, src, 0, len, DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_pq(chan, dma_dest, dma_src, 1, &coef,
+ len, dma_flags);
+ if (tx) {
+ async_tx_submit(chan, tx, submit);
+ return tx;
+ }
+
+ /* could not get a descriptor, unmap and fall through to
+ * the synchronous path
+ */
+ dma_unmap_page(dev, dma_dest[1], len, DMA_BIDIRECTIONAL);
+ dma_unmap_page(dev, dma_src[0], len, DMA_TO_DEVICE);
+ }
+
+ /* no channel available, or failed to allocate a descriptor, so
+ * perform the operation synchronously
+ */
+ async_tx_quiesce(&submit->depend_tx);
+ qmul = raid6_gfmul[coef];
+ d = page_address(dest);
+ s = page_address(src);
+
+ while (len--)
+ *d++ = qmul[*s++];
+
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *
+__2data_recov_4(int disks, size_t bytes, int faila, int failb,
+ struct page **blocks, struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct page *p, *q, *a, *b;
+ struct page *srcs[2];
+ unsigned char coef[2];
+ enum async_tx_flags flags = submit->flags;
+ dma_async_tx_callback cb_fn = submit->cb_fn;
+ void *cb_param = submit->cb_param;
+ void *scribble = submit->scribble;
+
+ p = blocks[disks-2];
+ q = blocks[disks-1];
+
+ a = blocks[faila];
+ b = blocks[failb];
+
+ /* in the 4 disk case P + Pxy == P and Q + Qxy == Q */
+ /* Dx = A*(P+Pxy) + B*(Q+Qxy) */
+ srcs[0] = p;
+ srcs[1] = q;
+ coef[0] = raid6_gfexi[failb-faila];
+ coef[1] = raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]];
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_sum_product(b, srcs, coef, bytes, submit);
+
+ /* Dy = P+Pxy+Dx */
+ srcs[0] = p;
+ srcs[1] = b;
+ init_async_submit(submit, flags | ASYNC_TX_XOR_ZERO_DST, tx, cb_fn,
+ cb_param, scribble);
+ tx = async_xor(a, srcs, 0, 2, bytes, submit);
+
+ return tx;
+
+}
+
+static struct dma_async_tx_descriptor *
+__2data_recov_5(int disks, size_t bytes, int faila, int failb,
+ struct page **blocks, struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct page *p, *q, *g, *dp, *dq;
+ struct page *srcs[2];
+ unsigned char coef[2];
+ enum async_tx_flags flags = submit->flags;
+ dma_async_tx_callback cb_fn = submit->cb_fn;
+ void *cb_param = submit->cb_param;
+ void *scribble = submit->scribble;
+ int good_srcs, good, i;
+
+ good_srcs = 0;
+ good = -1;
+ for (i = 0; i < disks-2; i++) {
+ if (blocks[i] == NULL)
+ continue;
+ if (i == faila || i == failb)
+ continue;
+ good = i;
+ good_srcs++;
+ }
+ BUG_ON(good_srcs > 1);
+
+ p = blocks[disks-2];
+ q = blocks[disks-1];
+ g = blocks[good];
+
+ /* Compute syndrome with zero for the missing data pages
+ * Use the dead data pages as temporary storage for delta p and
+ * delta q
+ */
+ dp = blocks[faila];
+ dq = blocks[failb];
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_memcpy(dp, g, 0, 0, bytes, submit);
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_mult(dq, g, raid6_gfexp[good], bytes, submit);
+
+ /* compute P + Pxy */
+ srcs[0] = dp;
+ srcs[1] = p;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dp, srcs, 0, 2, bytes, submit);
+
+ /* compute Q + Qxy */
+ srcs[0] = dq;
+ srcs[1] = q;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dq, srcs, 0, 2, bytes, submit);
+
+ /* Dx = A*(P+Pxy) + B*(Q+Qxy) */
+ srcs[0] = dp;
+ srcs[1] = dq;
+ coef[0] = raid6_gfexi[failb-faila];
+ coef[1] = raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]];
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_sum_product(dq, srcs, coef, bytes, submit);
+
+ /* Dy = P+Pxy+Dx */
+ srcs[0] = dp;
+ srcs[1] = dq;
+ init_async_submit(submit, flags | ASYNC_TX_XOR_DROP_DST, tx, cb_fn,
+ cb_param, scribble);
+ tx = async_xor(dp, srcs, 0, 2, bytes, submit);
+
+ return tx;
+}
+
+static struct dma_async_tx_descriptor *
+__2data_recov_n(int disks, size_t bytes, int faila, int failb,
+ struct page **blocks, struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct page *p, *q, *dp, *dq;
+ struct page *srcs[2];
+ unsigned char coef[2];
+ enum async_tx_flags flags = submit->flags;
+ dma_async_tx_callback cb_fn = submit->cb_fn;
+ void *cb_param = submit->cb_param;
+ void *scribble = submit->scribble;
+
+ p = blocks[disks-2];
+ q = blocks[disks-1];
+
+ /* Compute syndrome with zero for the missing data pages
+ * Use the dead data pages as temporary storage for
+ * delta p and delta q
+ */
+ dp = blocks[faila];
+ blocks[faila] = NULL;
+ blocks[disks-2] = dp;
+ dq = blocks[failb];
+ blocks[failb] = NULL;
+ blocks[disks-1] = dq;
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_gen_syndrome(blocks, 0, disks, bytes, submit);
+
+ /* Restore pointer table */
+ blocks[faila] = dp;
+ blocks[failb] = dq;
+ blocks[disks-2] = p;
+ blocks[disks-1] = q;
+
+ /* compute P + Pxy */
+ srcs[0] = dp;
+ srcs[1] = p;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dp, srcs, 0, 2, bytes, submit);
+
+ /* compute Q + Qxy */
+ srcs[0] = dq;
+ srcs[1] = q;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dq, srcs, 0, 2, bytes, submit);
+
+ /* Dx = A*(P+Pxy) + B*(Q+Qxy) */
+ srcs[0] = dp;
+ srcs[1] = dq;
+ coef[0] = raid6_gfexi[failb-faila];
+ coef[1] = raid6_gfinv[raid6_gfexp[faila]^raid6_gfexp[failb]];
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_sum_product(dq, srcs, coef, bytes, submit);
+
+ /* Dy = P+Pxy+Dx */
+ srcs[0] = dp;
+ srcs[1] = dq;
+ init_async_submit(submit, flags | ASYNC_TX_XOR_DROP_DST, tx, cb_fn,
+ cb_param, scribble);
+ tx = async_xor(dp, srcs, 0, 2, bytes, submit);
+
+ return tx;
+}
+
+/**
+ * async_raid6_2data_recov - asynchronously calculate two missing data blocks
+ * @disks: number of disks in the RAID-6 array
+ * @bytes: block size
+ * @faila: first failed drive index
+ * @failb: second failed drive index
+ * @blocks: array of source pointers where the last two entries are p and q
+ * @submit: submission/completion modifiers
+ */
+struct dma_async_tx_descriptor *
+async_raid6_2data_recov(int disks, size_t bytes, int faila, int failb,
+ struct page **blocks, struct async_submit_ctl *submit)
+{
+ int non_zero_srcs, i;
+
+ BUG_ON(faila == failb);
+ if (failb < faila)
+ swap(faila, failb);
+
+ pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
+
+ /* we need to preserve the contents of 'blocks' for the async
+ * case, so punt to synchronous if a scribble buffer is not available
+ */
+ if (!submit->scribble) {
+ void **ptrs = (void **) blocks;
+
+ async_tx_quiesce(&submit->depend_tx);
+ for (i = 0; i < disks; i++)
+ if (blocks[i] == NULL)
+ ptrs[i] = (void *) raid6_empty_zero_page;
+ else
+ ptrs[i] = page_address(blocks[i]);
+
+ raid6_2data_recov(disks, bytes, faila, failb, ptrs);
+
+ async_tx_sync_epilog(submit);
+
+ return NULL;
+ }
+
+ non_zero_srcs = 0;
+ for (i = 0; i < disks-2 && non_zero_srcs < 4; i++)
+ if (blocks[i])
+ non_zero_srcs++;
+ switch (non_zero_srcs) {
+ case 0:
+ case 1:
+ /* There must be at least 2 sources - the failed devices. */
+ BUG();
+
+ case 2:
+ /* dma devices do not uniformly understand a zero source pq
+ * operation (in contrast to the synchronous case), so
+ * explicitly handle the special case of a 4 disk array with
+ * both data disks missing.
+ */
+ return __2data_recov_4(disks, bytes, faila, failb, blocks, submit);
+ case 3:
+ /* dma devices do not uniformly understand a single
+ * source pq operation (in contrast to the synchronous
+ * case), so explicitly handle the special case of a 5 disk
+ * array with 2 of 3 data disks missing.
+ */
+ return __2data_recov_5(disks, bytes, faila, failb, blocks, submit);
+ default:
+ return __2data_recov_n(disks, bytes, faila, failb, blocks, submit);
+ }
+}
+EXPORT_SYMBOL_GPL(async_raid6_2data_recov);
+
+/**
+ * async_raid6_datap_recov - asynchronously calculate a data and the 'p' block
+ * @disks: number of disks in the RAID-6 array
+ * @bytes: block size
+ * @faila: failed drive index
+ * @blocks: array of source pointers where the last two entries are p and q
+ * @submit: submission/completion modifiers
+ */
+struct dma_async_tx_descriptor *
+async_raid6_datap_recov(int disks, size_t bytes, int faila,
+ struct page **blocks, struct async_submit_ctl *submit)
+{
+ struct dma_async_tx_descriptor *tx = NULL;
+ struct page *p, *q, *dq;
+ u8 coef;
+ enum async_tx_flags flags = submit->flags;
+ dma_async_tx_callback cb_fn = submit->cb_fn;
+ void *cb_param = submit->cb_param;
+ void *scribble = submit->scribble;
+ int good_srcs, good, i;
+ struct page *srcs[2];
+
+ pr_debug("%s: disks: %d len: %zu\n", __func__, disks, bytes);
+
+ /* we need to preserve the contents of 'blocks' for the async
+ * case, so punt to synchronous if a scribble buffer is not available
+ */
+ if (!scribble) {
+ void **ptrs = (void **) blocks;
+
+ async_tx_quiesce(&submit->depend_tx);
+ for (i = 0; i < disks; i++)
+ if (blocks[i] == NULL)
+ ptrs[i] = (void*)raid6_empty_zero_page;
+ else
+ ptrs[i] = page_address(blocks[i]);
+
+ raid6_datap_recov(disks, bytes, faila, ptrs);
+
+ async_tx_sync_epilog(submit);
+
+ return NULL;
+ }
+
+ good_srcs = 0;
+ good = -1;
+ for (i = 0; i < disks-2; i++) {
+ if (i == faila)
+ continue;
+ if (blocks[i]) {
+ good = i;
+ good_srcs++;
+ if (good_srcs > 1)
+ break;
+ }
+ }
+ BUG_ON(good_srcs == 0);
+
+ p = blocks[disks-2];
+ q = blocks[disks-1];
+
+ /* Compute syndrome with zero for the missing data page
+ * Use the dead data page as temporary storage for delta q
+ */
+ dq = blocks[faila];
+ blocks[faila] = NULL;
+ blocks[disks-1] = dq;
+
+ /* in the 4-disk case we only need to perform a single source
+ * multiplication with the one good data block.
+ */
+ if (good_srcs == 1) {
+ struct page *g = blocks[good];
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL,
+ scribble);
+ tx = async_memcpy(p, g, 0, 0, bytes, submit);
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL,
+ scribble);
+ tx = async_mult(dq, g, raid6_gfexp[good], bytes, submit);
+ } else {
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL,
+ scribble);
+ tx = async_gen_syndrome(blocks, 0, disks, bytes, submit);
+ }
+
+ /* Restore pointer table */
+ blocks[faila] = dq;
+ blocks[disks-1] = q;
+
+ /* calculate g^{-faila} */
+ coef = raid6_gfinv[raid6_gfexp[faila]];
+
+ srcs[0] = dq;
+ srcs[1] = q;
+ init_async_submit(submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ NULL, NULL, scribble);
+ tx = async_xor(dq, srcs, 0, 2, bytes, submit);
+
+ init_async_submit(submit, ASYNC_TX_FENCE, tx, NULL, NULL, scribble);
+ tx = async_mult(dq, dq, coef, bytes, submit);
+
+ srcs[0] = p;
+ srcs[1] = dq;
+ init_async_submit(submit, flags | ASYNC_TX_XOR_DROP_DST, tx, cb_fn,
+ cb_param, scribble);
+ tx = async_xor(p, srcs, 0, 2, bytes, submit);
+
+ return tx;
+}
+EXPORT_SYMBOL_GPL(async_raid6_datap_recov);
+
+MODULE_AUTHOR("Dan Williams <dan.j.williams@intel.com>");
+MODULE_DESCRIPTION("asynchronous RAID-6 recovery api");
+MODULE_LICENSE("GPL");
async_dmaengine_put();
}
+module_init(async_tx_init);
+module_exit(async_tx_exit);
+
/**
* __async_tx_find_channel - find a channel to carry out the operation or let
* the transaction execute synchronously
- * @depend_tx: transaction dependency
+ * @submit: transaction dependency and submission modifiers
* @tx_type: transaction type
*/
struct dma_chan *
-__async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx,
- enum dma_transaction_type tx_type)
+__async_tx_find_channel(struct async_submit_ctl *submit,
+ enum dma_transaction_type tx_type)
{
+ struct dma_async_tx_descriptor *depend_tx = submit->depend_tx;
+
/* see if we can keep the chain on one channel */
if (depend_tx &&
dma_has_cap(tx_type, depend_tx->chan->device->cap_mask))
return async_dma_find_channel(tx_type);
}
EXPORT_SYMBOL_GPL(__async_tx_find_channel);
-#else
-static int __init async_tx_init(void)
-{
- printk(KERN_INFO "async_tx: api initialized (sync-only)\n");
- return 0;
-}
-
-static void __exit async_tx_exit(void)
-{
- do { } while (0);
-}
#endif
async_tx_channel_switch(struct dma_async_tx_descriptor *depend_tx,
struct dma_async_tx_descriptor *tx)
{
- struct dma_chan *chan;
- struct dma_device *device;
+ struct dma_chan *chan = depend_tx->chan;
+ struct dma_device *device = chan->device;
struct dma_async_tx_descriptor *intr_tx = (void *) ~0;
+ #ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+ BUG();
+ #endif
+
/* first check to see if we can still append to depend_tx */
spin_lock_bh(&depend_tx->lock);
if (depend_tx->parent && depend_tx->chan == tx->chan) {
}
spin_unlock_bh(&depend_tx->lock);
- if (!intr_tx)
+ /* attached dependency, flush the parent channel */
+ if (!intr_tx) {
+ device->device_issue_pending(chan);
return;
-
- chan = depend_tx->chan;
- device = chan->device;
+ }
/* see if we can schedule an interrupt
* otherwise poll for completion
intr_tx->tx_submit(intr_tx);
async_tx_ack(intr_tx);
}
+ device->device_issue_pending(chan);
} else {
if (dma_wait_for_async_tx(depend_tx) == DMA_ERROR)
panic("%s: DMA_ERROR waiting for depend_tx\n",
/**
- * submit_disposition - while holding depend_tx->lock we must avoid submitting
- * new operations to prevent a circular locking dependency with
- * drivers that already hold a channel lock when calling
- * async_tx_run_dependencies.
+ * submit_disposition - flags for routing an incoming operation
* @ASYNC_TX_SUBMITTED: we were able to append the new operation under the lock
* @ASYNC_TX_CHANNEL_SWITCH: when the lock is dropped schedule a channel switch
* @ASYNC_TX_DIRECT_SUBMIT: when the lock is dropped submit directly
+ *
+ * while holding depend_tx->lock we must avoid submitting new operations
+ * to prevent a circular locking dependency with drivers that already
+ * hold a channel lock when calling async_tx_run_dependencies.
*/
enum submit_disposition {
ASYNC_TX_SUBMITTED,
void
async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
- enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+ struct async_submit_ctl *submit)
{
- tx->callback = cb_fn;
- tx->callback_param = cb_param;
+ struct dma_async_tx_descriptor *depend_tx = submit->depend_tx;
+
+ tx->callback = submit->cb_fn;
+ tx->callback_param = submit->cb_param;
if (depend_tx) {
enum submit_disposition s;
tx->tx_submit(tx);
}
- if (flags & ASYNC_TX_ACK)
+ if (submit->flags & ASYNC_TX_ACK)
async_tx_ack(tx);
- if (depend_tx && (flags & ASYNC_TX_DEP_ACK))
+ if (depend_tx)
async_tx_ack(depend_tx);
}
EXPORT_SYMBOL_GPL(async_tx_submit);
/**
- * async_trigger_callback - schedules the callback function to be run after
- * any dependent operations have been completed.
- * @flags: ASYNC_TX_ACK, ASYNC_TX_DEP_ACK
- * @depend_tx: 'callback' requires the completion of this transaction
- * @cb_fn: function to call after depend_tx completes
- * @cb_param: parameter to pass to the callback routine
+ * async_trigger_callback - schedules the callback function to be run
+ * @submit: submission and completion parameters
+ *
+ * honored flags: ASYNC_TX_ACK
+ *
+ * The callback is run after any dependent operations have completed.
*/
struct dma_async_tx_descriptor *
-async_trigger_callback(enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+async_trigger_callback(struct async_submit_ctl *submit)
{
struct dma_chan *chan;
struct dma_device *device;
struct dma_async_tx_descriptor *tx;
+ struct dma_async_tx_descriptor *depend_tx = submit->depend_tx;
if (depend_tx) {
chan = depend_tx->chan;
if (tx) {
pr_debug("%s: (async)\n", __func__);
- async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+ async_tx_submit(chan, tx, submit);
} else {
pr_debug("%s: (sync)\n", __func__);
/* wait for any prerequisite operations */
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
}
return tx;
}
EXPORT_SYMBOL_GPL(async_tx_quiesce);
-module_init(async_tx_init);
-module_exit(async_tx_exit);
-
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("Asynchronous Bulk Memory Transactions API");
MODULE_LICENSE("GPL");
/* do_async_xor - dma map the pages and perform the xor with an engine */
static __async_inline struct dma_async_tx_descriptor *
do_async_xor(struct dma_chan *chan, struct page *dest, struct page **src_list,
- unsigned int offset, int src_cnt, size_t len,
- enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+ unsigned int offset, int src_cnt, size_t len, dma_addr_t *dma_src,
+ struct async_submit_ctl *submit)
{
struct dma_device *dma = chan->device;
- dma_addr_t *dma_src = (dma_addr_t *) src_list;
struct dma_async_tx_descriptor *tx = NULL;
int src_off = 0;
int i;
- dma_async_tx_callback _cb_fn;
- void *_cb_param;
- enum async_tx_flags async_flags;
+ dma_async_tx_callback cb_fn_orig = submit->cb_fn;
+ void *cb_param_orig = submit->cb_param;
+ enum async_tx_flags flags_orig = submit->flags;
enum dma_ctrl_flags dma_flags;
- int xor_src_cnt;
+ int xor_src_cnt = 0;
dma_addr_t dma_dest;
/* map the dest bidrectional in case it is re-used as a source */
dma_dest = dma_map_page(dma->dev, dest, offset, len, DMA_BIDIRECTIONAL);
for (i = 0; i < src_cnt; i++) {
/* only map the dest once */
+ if (!src_list[i])
+ continue;
if (unlikely(src_list[i] == dest)) {
- dma_src[i] = dma_dest;
+ dma_src[xor_src_cnt++] = dma_dest;
continue;
}
- dma_src[i] = dma_map_page(dma->dev, src_list[i], offset,
- len, DMA_TO_DEVICE);
+ dma_src[xor_src_cnt++] = dma_map_page(dma->dev, src_list[i], offset,
+ len, DMA_TO_DEVICE);
}
+ src_cnt = xor_src_cnt;
while (src_cnt) {
- async_flags = flags;
+ submit->flags = flags_orig;
dma_flags = 0;
- xor_src_cnt = min(src_cnt, dma->max_xor);
+ xor_src_cnt = min(src_cnt, (int)dma->max_xor);
/* if we are submitting additional xors, leave the chain open,
* clear the callback parameters, and leave the destination
* buffer mapped
*/
if (src_cnt > xor_src_cnt) {
- async_flags &= ~ASYNC_TX_ACK;
+ submit->flags &= ~ASYNC_TX_ACK;
+ submit->flags |= ASYNC_TX_FENCE;
dma_flags = DMA_COMPL_SKIP_DEST_UNMAP;
- _cb_fn = NULL;
- _cb_param = NULL;
+ submit->cb_fn = NULL;
+ submit->cb_param = NULL;
} else {
- _cb_fn = cb_fn;
- _cb_param = cb_param;
+ submit->cb_fn = cb_fn_orig;
+ submit->cb_param = cb_param_orig;
}
- if (_cb_fn)
+ if (submit->cb_fn)
dma_flags |= DMA_PREP_INTERRUPT;
-
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
/* Since we have clobbered the src_list we are committed
* to doing this asynchronously. Drivers force forward progress
* in case they can not provide a descriptor
xor_src_cnt, len, dma_flags);
if (unlikely(!tx))
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
/* spin wait for the preceeding transactions to complete */
while (unlikely(!tx)) {
dma_flags);
}
- async_tx_submit(chan, tx, async_flags, depend_tx, _cb_fn,
- _cb_param);
-
- depend_tx = tx;
- flags |= ASYNC_TX_DEP_ACK;
+ async_tx_submit(chan, tx, submit);
+ submit->depend_tx = tx;
if (src_cnt > xor_src_cnt) {
/* drop completed sources */
static void
do_sync_xor(struct page *dest, struct page **src_list, unsigned int offset,
- int src_cnt, size_t len, enum async_tx_flags flags,
- dma_async_tx_callback cb_fn, void *cb_param)
+ int src_cnt, size_t len, struct async_submit_ctl *submit)
{
int i;
- int xor_src_cnt;
+ int xor_src_cnt = 0;
int src_off = 0;
void *dest_buf;
- void **srcs = (void **) src_list;
+ void **srcs;
- /* reuse the 'src_list' array to convert to buffer pointers */
- for (i = 0; i < src_cnt; i++)
- srcs[i] = page_address(src_list[i]) + offset;
+ if (submit->scribble)
+ srcs = submit->scribble;
+ else
+ srcs = (void **) src_list;
+ /* convert to buffer pointers */
+ for (i = 0; i < src_cnt; i++)
+ if (src_list[i])
+ srcs[xor_src_cnt++] = page_address(src_list[i]) + offset;
+ src_cnt = xor_src_cnt;
/* set destination address */
dest_buf = page_address(dest) + offset;
- if (flags & ASYNC_TX_XOR_ZERO_DST)
+ if (submit->flags & ASYNC_TX_XOR_ZERO_DST)
memset(dest_buf, 0, len);
while (src_cnt > 0) {
src_off += xor_src_cnt;
}
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
}
/**
* async_xor - attempt to xor a set of blocks with a dma engine.
- * xor_blocks always uses the dest as a source so the ASYNC_TX_XOR_ZERO_DST
- * flag must be set to not include dest data in the calculation. The
- * assumption with dma eninges is that they only use the destination
- * buffer as a source when it is explicity specified in the source list.
* @dest: destination page
- * @src_list: array of source pages (if the dest is also a source it must be
- * at index zero). The contents of this array may be overwritten.
- * @offset: offset in pages to start transaction
+ * @src_list: array of source pages
+ * @offset: common src/dst offset to start transaction
* @src_cnt: number of source pages
* @len: length in bytes
- * @flags: ASYNC_TX_XOR_ZERO_DST, ASYNC_TX_XOR_DROP_DEST,
- * ASYNC_TX_ACK, ASYNC_TX_DEP_ACK
- * @depend_tx: xor depends on the result of this transaction.
- * @cb_fn: function to call when the xor completes
- * @cb_param: parameter to pass to the callback routine
+ * @submit: submission / completion modifiers
+ *
+ * honored flags: ASYNC_TX_ACK, ASYNC_TX_XOR_ZERO_DST, ASYNC_TX_XOR_DROP_DST
+ *
+ * xor_blocks always uses the dest as a source so the
+ * ASYNC_TX_XOR_ZERO_DST flag must be set to not include dest data in
+ * the calculation. The assumption with dma eninges is that they only
+ * use the destination buffer as a source when it is explicity specified
+ * in the source list.
+ *
+ * src_list note: if the dest is also a source it must be at index zero.
+ * The contents of this array will be overwritten if a scribble region
+ * is not specified.
*/
struct dma_async_tx_descriptor *
async_xor(struct page *dest, struct page **src_list, unsigned int offset,
- int src_cnt, size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+ int src_cnt, size_t len, struct async_submit_ctl *submit)
{
- struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_XOR,
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_XOR,
&dest, 1, src_list,
src_cnt, len);
+ dma_addr_t *dma_src = NULL;
+
BUG_ON(src_cnt <= 1);
- if (chan) {
+ if (submit->scribble)
+ dma_src = submit->scribble;
+ else if (sizeof(dma_addr_t) <= sizeof(struct page *))
+ dma_src = (dma_addr_t *) src_list;
+
+ if (dma_src && chan && is_dma_xor_aligned(chan->device, offset, 0, len)) {
/* run the xor asynchronously */
pr_debug("%s (async): len: %zu\n", __func__, len);
return do_async_xor(chan, dest, src_list, offset, src_cnt, len,
- flags, depend_tx, cb_fn, cb_param);
+ dma_src, submit);
} else {
/* run the xor synchronously */
pr_debug("%s (sync): len: %zu\n", __func__, len);
+ WARN_ONCE(chan, "%s: no space for dma address conversion\n",
+ __func__);
/* in the sync case the dest is an implied source
* (assumes the dest is the first source)
*/
- if (flags & ASYNC_TX_XOR_DROP_DST) {
+ if (submit->flags & ASYNC_TX_XOR_DROP_DST) {
src_cnt--;
src_list++;
}
/* wait for any prerequisite operations */
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
- do_sync_xor(dest, src_list, offset, src_cnt, len,
- flags, cb_fn, cb_param);
+ do_sync_xor(dest, src_list, offset, src_cnt, len, submit);
return NULL;
}
}
/**
- * async_xor_zero_sum - attempt a xor parity check with a dma engine.
+ * async_xor_val - attempt a xor parity check with a dma engine.
* @dest: destination page used if the xor is performed synchronously
- * @src_list: array of source pages. The dest page must be listed as a source
- * at index zero. The contents of this array may be overwritten.
+ * @src_list: array of source pages
* @offset: offset in pages to start transaction
* @src_cnt: number of source pages
* @len: length in bytes
* @result: 0 if sum == 0 else non-zero
- * @flags: ASYNC_TX_ACK, ASYNC_TX_DEP_ACK
- * @depend_tx: xor depends on the result of this transaction.
- * @cb_fn: function to call when the xor completes
- * @cb_param: parameter to pass to the callback routine
+ * @submit: submission / completion modifiers
+ *
+ * honored flags: ASYNC_TX_ACK
+ *
+ * src_list note: if the dest is also a source it must be at index zero.
+ * The contents of this array will be overwritten if a scribble region
+ * is not specified.
*/
struct dma_async_tx_descriptor *
-async_xor_zero_sum(struct page *dest, struct page **src_list,
- unsigned int offset, int src_cnt, size_t len,
- u32 *result, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_param)
+async_xor_val(struct page *dest, struct page **src_list, unsigned int offset,
+ int src_cnt, size_t len, enum sum_check_flags *result,
+ struct async_submit_ctl *submit)
{
- struct dma_chan *chan = async_tx_find_channel(depend_tx, DMA_ZERO_SUM,
+ struct dma_chan *chan = async_tx_find_channel(submit, DMA_XOR_VAL,
&dest, 1, src_list,
src_cnt, len);
struct dma_device *device = chan ? chan->device : NULL;
struct dma_async_tx_descriptor *tx = NULL;
+ dma_addr_t *dma_src = NULL;
BUG_ON(src_cnt <= 1);
- if (device && src_cnt <= device->max_xor) {
- dma_addr_t *dma_src = (dma_addr_t *) src_list;
- unsigned long dma_prep_flags = cb_fn ? DMA_PREP_INTERRUPT : 0;
+ if (submit->scribble)
+ dma_src = submit->scribble;
+ else if (sizeof(dma_addr_t) <= sizeof(struct page *))
+ dma_src = (dma_addr_t *) src_list;
+
+ if (dma_src && device && src_cnt <= device->max_xor &&
+ is_dma_xor_aligned(device, offset, 0, len)) {
+ unsigned long dma_prep_flags = 0;
int i;
pr_debug("%s: (async) len: %zu\n", __func__, len);
+ if (submit->cb_fn)
+ dma_prep_flags |= DMA_PREP_INTERRUPT;
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_prep_flags |= DMA_PREP_FENCE;
for (i = 0; i < src_cnt; i++)
dma_src[i] = dma_map_page(device->dev, src_list[i],
offset, len, DMA_TO_DEVICE);
- tx = device->device_prep_dma_zero_sum(chan, dma_src, src_cnt,
- len, result,
- dma_prep_flags);
+ tx = device->device_prep_dma_xor_val(chan, dma_src, src_cnt,
+ len, result,
+ dma_prep_flags);
if (unlikely(!tx)) {
- async_tx_quiesce(&depend_tx);
+ async_tx_quiesce(&submit->depend_tx);
while (!tx) {
dma_async_issue_pending(chan);
- tx = device->device_prep_dma_zero_sum(chan,
+ tx = device->device_prep_dma_xor_val(chan,
dma_src, src_cnt, len, result,
dma_prep_flags);
}
}
- async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param);
+ async_tx_submit(chan, tx, submit);
} else {
- unsigned long xor_flags = flags;
+ enum async_tx_flags flags_orig = submit->flags;
pr_debug("%s: (sync) len: %zu\n", __func__, len);
+ WARN_ONCE(device && src_cnt <= device->max_xor,
+ "%s: no space for dma address conversion\n",
+ __func__);
- xor_flags |= ASYNC_TX_XOR_DROP_DST;
- xor_flags &= ~ASYNC_TX_ACK;
+ submit->flags |= ASYNC_TX_XOR_DROP_DST;
+ submit->flags &= ~ASYNC_TX_ACK;
- tx = async_xor(dest, src_list, offset, src_cnt, len, xor_flags,
- depend_tx, NULL, NULL);
+ tx = async_xor(dest, src_list, offset, src_cnt, len, submit);
async_tx_quiesce(&tx);
- *result = page_is_zero(dest, offset, len) ? 0 : 1;
+ *result = !page_is_zero(dest, offset, len) << SUM_CHECK_P;
- async_tx_sync_epilog(cb_fn, cb_param);
+ async_tx_sync_epilog(submit);
+ submit->flags = flags_orig;
}
return tx;
}
-EXPORT_SYMBOL_GPL(async_xor_zero_sum);
-
-static int __init async_xor_init(void)
-{
- #ifdef CONFIG_ASYNC_TX_DMA
- /* To conserve stack space the input src_list (array of page pointers)
- * is reused to hold the array of dma addresses passed to the driver.
- * This conversion is only possible when dma_addr_t is less than the
- * the size of a pointer. HIGHMEM64G is known to violate this
- * assumption.
- */
- BUILD_BUG_ON(sizeof(dma_addr_t) > sizeof(struct page *));
- #endif
-
- return 0;
-}
-
-static void __exit async_xor_exit(void)
-{
- do { } while (0);
-}
-
-module_init(async_xor_init);
-module_exit(async_xor_exit);
+EXPORT_SYMBOL_GPL(async_xor_val);
MODULE_AUTHOR("Intel Corporation");
MODULE_DESCRIPTION("asynchronous xor/xor-zero-sum api");
--- /dev/null
+/*
+ * asynchronous raid6 recovery self test
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * based on drivers/md/raid6test/test.c:
+ * Copyright 2002-2007 H. Peter Anvin
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/async_tx.h>
+#include <linux/random.h>
+
+#undef pr
+#define pr(fmt, args...) pr_info("raid6test: " fmt, ##args)
+
+#define NDISKS 16 /* Including P and Q */
+
+static struct page *dataptrs[NDISKS];
+static addr_conv_t addr_conv[NDISKS];
+static struct page *data[NDISKS+3];
+static struct page *spare;
+static struct page *recovi;
+static struct page *recovj;
+
+static void callback(void *param)
+{
+ struct completion *cmp = param;
+
+ complete(cmp);
+}
+
+static void makedata(int disks)
+{
+ int i, j;
+
+ for (i = 0; i < disks; i++) {
+ for (j = 0; j < PAGE_SIZE/sizeof(u32); j += sizeof(u32)) {
+ u32 *p = page_address(data[i]) + j;
+
+ *p = random32();
+ }
+
+ dataptrs[i] = data[i];
+ }
+}
+
+static char disk_type(int d, int disks)
+{
+ if (d == disks - 2)
+ return 'P';
+ else if (d == disks - 1)
+ return 'Q';
+ else
+ return 'D';
+}
+
+/* Recover two failed blocks. */
+static void raid6_dual_recov(int disks, size_t bytes, int faila, int failb, struct page **ptrs)
+{
+ struct async_submit_ctl submit;
+ struct completion cmp;
+ struct dma_async_tx_descriptor *tx = NULL;
+ enum sum_check_flags result = ~0;
+
+ if (faila > failb)
+ swap(faila, failb);
+
+ if (failb == disks-1) {
+ if (faila == disks-2) {
+ /* P+Q failure. Just rebuild the syndrome. */
+ init_async_submit(&submit, 0, NULL, NULL, NULL, addr_conv);
+ tx = async_gen_syndrome(ptrs, 0, disks, bytes, &submit);
+ } else {
+ struct page *blocks[disks];
+ struct page *dest;
+ int count = 0;
+ int i;
+
+ /* data+Q failure. Reconstruct data from P,
+ * then rebuild syndrome
+ */
+ for (i = disks; i-- ; ) {
+ if (i == faila || i == failb)
+ continue;
+ blocks[count++] = ptrs[i];
+ }
+ dest = ptrs[faila];
+ init_async_submit(&submit, ASYNC_TX_XOR_ZERO_DST, NULL,
+ NULL, NULL, addr_conv);
+ tx = async_xor(dest, blocks, 0, count, bytes, &submit);
+
+ init_async_submit(&submit, 0, tx, NULL, NULL, addr_conv);
+ tx = async_gen_syndrome(ptrs, 0, disks, bytes, &submit);
+ }
+ } else {
+ if (failb == disks-2) {
+ /* data+P failure. */
+ init_async_submit(&submit, 0, NULL, NULL, NULL, addr_conv);
+ tx = async_raid6_datap_recov(disks, bytes, faila, ptrs, &submit);
+ } else {
+ /* data+data failure. */
+ init_async_submit(&submit, 0, NULL, NULL, NULL, addr_conv);
+ tx = async_raid6_2data_recov(disks, bytes, faila, failb, ptrs, &submit);
+ }
+ }
+ init_completion(&cmp);
+ init_async_submit(&submit, ASYNC_TX_ACK, tx, callback, &cmp, addr_conv);
+ tx = async_syndrome_val(ptrs, 0, disks, bytes, &result, spare, &submit);
+ async_tx_issue_pending(tx);
+
+ if (wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000)) == 0)
+ pr("%s: timeout! (faila: %d failb: %d disks: %d)\n",
+ __func__, faila, failb, disks);
+
+ if (result != 0)
+ pr("%s: validation failure! faila: %d failb: %d sum_check_flags: %x\n",
+ __func__, faila, failb, result);
+}
+
+static int test_disks(int i, int j, int disks)
+{
+ int erra, errb;
+
+ memset(page_address(recovi), 0xf0, PAGE_SIZE);
+ memset(page_address(recovj), 0xba, PAGE_SIZE);
+
+ dataptrs[i] = recovi;
+ dataptrs[j] = recovj;
+
+ raid6_dual_recov(disks, PAGE_SIZE, i, j, dataptrs);
+
+ erra = memcmp(page_address(data[i]), page_address(recovi), PAGE_SIZE);
+ errb = memcmp(page_address(data[j]), page_address(recovj), PAGE_SIZE);
+
+ pr("%s(%d, %d): faila=%3d(%c) failb=%3d(%c) %s\n",
+ __func__, i, j, i, disk_type(i, disks), j, disk_type(j, disks),
+ (!erra && !errb) ? "OK" : !erra ? "ERRB" : !errb ? "ERRA" : "ERRAB");
+
+ dataptrs[i] = data[i];
+ dataptrs[j] = data[j];
+
+ return erra || errb;
+}
+
+static int test(int disks, int *tests)
+{
+ struct dma_async_tx_descriptor *tx;
+ struct async_submit_ctl submit;
+ struct completion cmp;
+ int err = 0;
+ int i, j;
+
+ recovi = data[disks];
+ recovj = data[disks+1];
+ spare = data[disks+2];
+
+ makedata(disks);
+
+ /* Nuke syndromes */
+ memset(page_address(data[disks-2]), 0xee, PAGE_SIZE);
+ memset(page_address(data[disks-1]), 0xee, PAGE_SIZE);
+
+ /* Generate assumed good syndrome */
+ init_completion(&cmp);
+ init_async_submit(&submit, ASYNC_TX_ACK, NULL, callback, &cmp, addr_conv);
+ tx = async_gen_syndrome(dataptrs, 0, disks, PAGE_SIZE, &submit);
+ async_tx_issue_pending(tx);
+
+ if (wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000)) == 0) {
+ pr("error: initial gen_syndrome(%d) timed out\n", disks);
+ return 1;
+ }
+
+ pr("testing the %d-disk case...\n", disks);
+ for (i = 0; i < disks-1; i++)
+ for (j = i+1; j < disks; j++) {
+ (*tests)++;
+ err += test_disks(i, j, disks);
+ }
+
+ return err;
+}
+
+
+static int raid6_test(void)
+{
+ int err = 0;
+ int tests = 0;
+ int i;
+
+ for (i = 0; i < NDISKS+3; i++) {
+ data[i] = alloc_page(GFP_KERNEL);
+ if (!data[i]) {
+ while (i--)
+ put_page(data[i]);
+ return -ENOMEM;
+ }
+ }
+
+ /* the 4-disk and 5-disk cases are special for the recovery code */
+ if (NDISKS > 4)
+ err += test(4, &tests);
+ if (NDISKS > 5)
+ err += test(5, &tests);
+ err += test(NDISKS, &tests);
+
+ pr("\n");
+ pr("complete (%d tests, %d failure%s)\n",
+ tests, err, err == 1 ? "" : "s");
+
+ for (i = 0; i < NDISKS+3; i++)
+ put_page(data[i]);
+
+ return 0;
+}
+
+static void raid6_test_exit(void)
+{
+}
+
+/* when compiled-in wait for drivers to load first (assumes dma drivers
+ * are also compliled-in)
+ */
+late_initcall(raid6_test);
+module_exit(raid6_test_exit);
+MODULE_AUTHOR("Dan Williams <dan.j.williams@intel.com>");
+MODULE_DESCRIPTION("asynchronous RAID-6 recovery self tests");
+MODULE_LICENSE("GPL");
select ACPI_CONTAINER
default y
+config ACPI_PROCESSOR_AGGREGATOR
+ tristate "Processor Aggregator"
+ depends on ACPI_PROCESSOR
+ depends on EXPERIMENTAL
+ depends on X86
+ help
+ ACPI 4.0 defines processor Aggregator, which enables OS to perform
+ specific processor configuration and control that applies to all
+ processors in the platform. Currently only logical processor idling
+ is defined, which is to reduce power consumption. This driver
+ supports the new device.
+
config ACPI_THERMAL
tristate "Thermal Zone"
depends on ACPI_PROCESSOR
processor-y := processor_core.o processor_throttling.o
processor-y += processor_idle.o processor_thermal.o
processor-$(CONFIG_CPU_FREQ) += processor_perflib.o
+
+obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
acpi_bus_generate_netlink_event(device->pnp.device_class,
dev_name(&device->dev), event,
(u32) ac->state);
+ acpi_notifier_call_chain(device, event, (u32) ac->state);
#ifdef CONFIG_ACPI_SYSFS_POWER
kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
#endif
--- /dev/null
+/*
+ * acpi_pad.c ACPI Processor Aggregator Driver
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/cpu.h>
+#include <linux/clockchips.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+#define ACPI_PROCESSOR_AGGREGATOR_CLASS "processor_aggregator"
+#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
+#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
+static DEFINE_MUTEX(isolated_cpus_lock);
+
+#define MWAIT_SUBSTATE_MASK (0xf)
+#define MWAIT_CSTATE_MASK (0xf)
+#define MWAIT_SUBSTATE_SIZE (4)
+#define CPUID_MWAIT_LEAF (5)
+#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
+#define CPUID5_ECX_INTERRUPT_BREAK (0x2)
+static unsigned long power_saving_mwait_eax;
+static void power_saving_mwait_init(void)
+{
+ unsigned int eax, ebx, ecx, edx;
+ unsigned int highest_cstate = 0;
+ unsigned int highest_subcstate = 0;
+ int i;
+
+ if (!boot_cpu_has(X86_FEATURE_MWAIT))
+ return;
+ if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
+ return;
+
+ cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+
+ if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
+ !(ecx & CPUID5_ECX_INTERRUPT_BREAK))
+ return;
+
+ edx >>= MWAIT_SUBSTATE_SIZE;
+ for (i = 0; i < 7 && edx; i++, edx >>= MWAIT_SUBSTATE_SIZE) {
+ if (edx & MWAIT_SUBSTATE_MASK) {
+ highest_cstate = i;
+ highest_subcstate = edx & MWAIT_SUBSTATE_MASK;
+ }
+ }
+ power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
+ (highest_subcstate - 1);
+
+ for_each_online_cpu(i)
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
+
+#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_AMD:
+ case X86_VENDOR_INTEL:
+ /*
+ * AMD Fam10h TSC will tick in all
+ * C/P/S0/S1 states when this bit is set.
+ */
+ if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+ return;
+
+ /*FALL THROUGH*/
+ default:
+ /* TSC could halt in idle, so notify users */
+ mark_tsc_unstable("TSC halts in idle");
+ }
+#endif
+}
+
+static unsigned long cpu_weight[NR_CPUS];
+static int tsk_in_cpu[NR_CPUS] = {[0 ... NR_CPUS-1] = -1};
+static DECLARE_BITMAP(pad_busy_cpus_bits, NR_CPUS);
+static void round_robin_cpu(unsigned int tsk_index)
+{
+ struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);
+ cpumask_var_t tmp;
+ int cpu;
+ unsigned long min_weight = -1, preferred_cpu;
+
+ if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
+ return;
+
+ mutex_lock(&isolated_cpus_lock);
+ cpumask_clear(tmp);
+ for_each_cpu(cpu, pad_busy_cpus)
+ cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
+ cpumask_andnot(tmp, cpu_online_mask, tmp);
+ /* avoid HT sibilings if possible */
+ if (cpumask_empty(tmp))
+ cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
+ if (cpumask_empty(tmp)) {
+ mutex_unlock(&isolated_cpus_lock);
+ return;
+ }
+ for_each_cpu(cpu, tmp) {
+ if (cpu_weight[cpu] < min_weight) {
+ min_weight = cpu_weight[cpu];
+ preferred_cpu = cpu;
+ }
+ }
+
+ if (tsk_in_cpu[tsk_index] != -1)
+ cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus);
+ tsk_in_cpu[tsk_index] = preferred_cpu;
+ cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
+ cpu_weight[preferred_cpu]++;
+ mutex_unlock(&isolated_cpus_lock);
+
+ set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
+}
+
+static void exit_round_robin(unsigned int tsk_index)
+{
+ struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);
+ cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus);
+ tsk_in_cpu[tsk_index] = -1;
+}
+
+static unsigned int idle_pct = 5; /* percentage */
+static unsigned int round_robin_time = 10; /* second */
+static int power_saving_thread(void *data)
+{
+ struct sched_param param = {.sched_priority = 1};
+ int do_sleep;
+ unsigned int tsk_index = (unsigned long)data;
+ u64 last_jiffies = 0;
+
+ sched_setscheduler(current, SCHED_RR, ¶m);
+
+ while (!kthread_should_stop()) {
+ int cpu;
+ u64 expire_time;
+
+ try_to_freeze();
+
+ /* round robin to cpus */
+ if (last_jiffies + round_robin_time * HZ < jiffies) {
+ last_jiffies = jiffies;
+ round_robin_cpu(tsk_index);
+ }
+
+ do_sleep = 0;
+
+ current_thread_info()->status &= ~TS_POLLING;
+ /*
+ * TS_POLLING-cleared state must be visible before we test
+ * NEED_RESCHED:
+ */
+ smp_mb();
+
+ expire_time = jiffies + HZ * (100 - idle_pct) / 100;
+
+ while (!need_resched()) {
+ local_irq_disable();
+ cpu = smp_processor_id();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
+ &cpu);
+ stop_critical_timings();
+
+ __monitor((void *)¤t_thread_info()->flags, 0, 0);
+ smp_mb();
+ if (!need_resched())
+ __mwait(power_saving_mwait_eax, 1);
+
+ start_critical_timings();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
+ &cpu);
+ local_irq_enable();
+
+ if (jiffies > expire_time) {
+ do_sleep = 1;
+ break;
+ }
+ }
+
+ current_thread_info()->status |= TS_POLLING;
+
+ /*
+ * current sched_rt has threshold for rt task running time.
+ * When a rt task uses 95% CPU time, the rt thread will be
+ * scheduled out for 5% CPU time to not starve other tasks. But
+ * the mechanism only works when all CPUs have RT task running,
+ * as if one CPU hasn't RT task, RT task from other CPUs will
+ * borrow CPU time from this CPU and cause RT task use > 95%
+ * CPU time. To make 'avoid staration' work, takes a nap here.
+ */
+ if (do_sleep)
+ schedule_timeout_killable(HZ * idle_pct / 100);
+ }
+
+ exit_round_robin(tsk_index);
+ return 0;
+}
+
+static struct task_struct *ps_tsks[NR_CPUS];
+static unsigned int ps_tsk_num;
+static int create_power_saving_task(void)
+{
+ ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
+ (void *)(unsigned long)ps_tsk_num,
+ "power_saving/%d", ps_tsk_num);
+ if (ps_tsks[ps_tsk_num]) {
+ ps_tsk_num++;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static void destroy_power_saving_task(void)
+{
+ if (ps_tsk_num > 0) {
+ ps_tsk_num--;
+ kthread_stop(ps_tsks[ps_tsk_num]);
+ }
+}
+
+static void set_power_saving_task_num(unsigned int num)
+{
+ if (num > ps_tsk_num) {
+ while (ps_tsk_num < num) {
+ if (create_power_saving_task())
+ return;
+ }
+ } else if (num < ps_tsk_num) {
+ while (ps_tsk_num > num)
+ destroy_power_saving_task();
+ }
+}
+
+static int acpi_pad_idle_cpus(unsigned int num_cpus)
+{
+ get_online_cpus();
+
+ num_cpus = min_t(unsigned int, num_cpus, num_online_cpus());
+ set_power_saving_task_num(num_cpus);
+
+ put_online_cpus();
+ return 0;
+}
+
+static uint32_t acpi_pad_idle_cpus_num(void)
+{
+ return ps_tsk_num;
+}
+
+static ssize_t acpi_pad_rrtime_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long num;
+ if (strict_strtoul(buf, 0, &num))
+ return -EINVAL;
+ if (num < 1 || num >= 100)
+ return -EINVAL;
+ mutex_lock(&isolated_cpus_lock);
+ round_robin_time = num;
+ mutex_unlock(&isolated_cpus_lock);
+ return count;
+}
+
+static ssize_t acpi_pad_rrtime_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d", round_robin_time);
+}
+static DEVICE_ATTR(rrtime, S_IRUGO|S_IWUSR,
+ acpi_pad_rrtime_show,
+ acpi_pad_rrtime_store);
+
+static ssize_t acpi_pad_idlepct_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long num;
+ if (strict_strtoul(buf, 0, &num))
+ return -EINVAL;
+ if (num < 1 || num >= 100)
+ return -EINVAL;
+ mutex_lock(&isolated_cpus_lock);
+ idle_pct = num;
+ mutex_unlock(&isolated_cpus_lock);
+ return count;
+}
+
+static ssize_t acpi_pad_idlepct_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d", idle_pct);
+}
+static DEVICE_ATTR(idlepct, S_IRUGO|S_IWUSR,
+ acpi_pad_idlepct_show,
+ acpi_pad_idlepct_store);
+
+static ssize_t acpi_pad_idlecpus_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ unsigned long num;
+ if (strict_strtoul(buf, 0, &num))
+ return -EINVAL;
+ mutex_lock(&isolated_cpus_lock);
+ acpi_pad_idle_cpus(num);
+ mutex_unlock(&isolated_cpus_lock);
+ return count;
+}
+
+static ssize_t acpi_pad_idlecpus_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return cpumask_scnprintf(buf, PAGE_SIZE,
+ to_cpumask(pad_busy_cpus_bits));
+}
+static DEVICE_ATTR(idlecpus, S_IRUGO|S_IWUSR,
+ acpi_pad_idlecpus_show,
+ acpi_pad_idlecpus_store);
+
+static int acpi_pad_add_sysfs(struct acpi_device *device)
+{
+ int result;
+
+ result = device_create_file(&device->dev, &dev_attr_idlecpus);
+ if (result)
+ return -ENODEV;
+ result = device_create_file(&device->dev, &dev_attr_idlepct);
+ if (result) {
+ device_remove_file(&device->dev, &dev_attr_idlecpus);
+ return -ENODEV;
+ }
+ result = device_create_file(&device->dev, &dev_attr_rrtime);
+ if (result) {
+ device_remove_file(&device->dev, &dev_attr_idlecpus);
+ device_remove_file(&device->dev, &dev_attr_idlepct);
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static void acpi_pad_remove_sysfs(struct acpi_device *device)
+{
+ device_remove_file(&device->dev, &dev_attr_idlecpus);
+ device_remove_file(&device->dev, &dev_attr_idlepct);
+ device_remove_file(&device->dev, &dev_attr_rrtime);
+}
+
+/* Query firmware how many CPUs should be idle */
+static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
+{
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ acpi_status status;
+ union acpi_object *package;
+ int rev, num, ret = -EINVAL;
+
+ status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return -EINVAL;
+ package = buffer.pointer;
+ if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
+ goto out;
+ rev = package->package.elements[0].integer.value;
+ num = package->package.elements[1].integer.value;
+ if (rev != 1)
+ goto out;
+ *num_cpus = num;
+ ret = 0;
+out:
+ kfree(buffer.pointer);
+ return ret;
+}
+
+/* Notify firmware how many CPUs are idle */
+static void acpi_pad_ost(acpi_handle handle, int stat,
+ uint32_t idle_cpus)
+{
+ union acpi_object params[3] = {
+ {.type = ACPI_TYPE_INTEGER,},
+ {.type = ACPI_TYPE_INTEGER,},
+ {.type = ACPI_TYPE_BUFFER,},
+ };
+ struct acpi_object_list arg_list = {3, params};
+
+ params[0].integer.value = ACPI_PROCESSOR_AGGREGATOR_NOTIFY;
+ params[1].integer.value = stat;
+ params[2].buffer.length = 4;
+ params[2].buffer.pointer = (void *)&idle_cpus;
+ acpi_evaluate_object(handle, "_OST", &arg_list, NULL);
+}
+
+static void acpi_pad_handle_notify(acpi_handle handle)
+{
+ int num_cpus, ret;
+ uint32_t idle_cpus;
+
+ mutex_lock(&isolated_cpus_lock);
+ if (acpi_pad_pur(handle, &num_cpus)) {
+ mutex_unlock(&isolated_cpus_lock);
+ return;
+ }
+ ret = acpi_pad_idle_cpus(num_cpus);
+ idle_cpus = acpi_pad_idle_cpus_num();
+ if (!ret)
+ acpi_pad_ost(handle, 0, idle_cpus);
+ else
+ acpi_pad_ost(handle, 1, 0);
+ mutex_unlock(&isolated_cpus_lock);
+}
+
+static void acpi_pad_notify(acpi_handle handle, u32 event,
+ void *data)
+{
+ struct acpi_device *device = data;
+
+ switch (event) {
+ case ACPI_PROCESSOR_AGGREGATOR_NOTIFY:
+ acpi_pad_handle_notify(handle);
+ acpi_bus_generate_proc_event(device, event, 0);
+ acpi_bus_generate_netlink_event(device->pnp.device_class,
+ dev_name(&device->dev), event, 0);
+ break;
+ default:
+ printk(KERN_WARNING"Unsupported event [0x%x]\n", event);
+ break;
+ }
+}
+
+static int acpi_pad_add(struct acpi_device *device)
+{
+ acpi_status status;
+
+ strcpy(acpi_device_name(device), ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME);
+ strcpy(acpi_device_class(device), ACPI_PROCESSOR_AGGREGATOR_CLASS);
+
+ if (acpi_pad_add_sysfs(device))
+ return -ENODEV;
+
+ status = acpi_install_notify_handler(device->handle,
+ ACPI_DEVICE_NOTIFY, acpi_pad_notify, device);
+ if (ACPI_FAILURE(status)) {
+ acpi_pad_remove_sysfs(device);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int acpi_pad_remove(struct acpi_device *device,
+ int type)
+{
+ mutex_lock(&isolated_cpus_lock);
+ acpi_pad_idle_cpus(0);
+ mutex_unlock(&isolated_cpus_lock);
+
+ acpi_remove_notify_handler(device->handle,
+ ACPI_DEVICE_NOTIFY, acpi_pad_notify);
+ acpi_pad_remove_sysfs(device);
+ return 0;
+}
+
+static const struct acpi_device_id pad_device_ids[] = {
+ {"ACPI000C", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, pad_device_ids);
+
+static struct acpi_driver acpi_pad_driver = {
+ .name = "processor_aggregator",
+ .class = ACPI_PROCESSOR_AGGREGATOR_CLASS,
+ .ids = pad_device_ids,
+ .ops = {
+ .add = acpi_pad_add,
+ .remove = acpi_pad_remove,
+ },
+};
+
+static int __init acpi_pad_init(void)
+{
+ power_saving_mwait_init();
+ if (power_saving_mwait_eax == 0)
+ return -EINVAL;
+
+ return acpi_bus_register_driver(&acpi_pad_driver);
+}
+
+static void __exit acpi_pad_exit(void)
+{
+ acpi_bus_unregister_driver(&acpi_pad_driver);
+}
+
+module_init(acpi_pad_init);
+module_exit(acpi_pad_exit);
+MODULE_AUTHOR("Shaohua Li<shaohua.li@intel.com>");
+MODULE_DESCRIPTION("ACPI Processor Aggregator Driver");
+MODULE_LICENSE("GPL");
EXPORT_SYMBOL(acpi_bus_get_device);
-int acpi_bus_get_status(struct acpi_device *device)
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+ unsigned long long *sta)
{
- acpi_status status = AE_OK;
- unsigned long long sta = 0;
-
+ acpi_status status;
- if (!device)
- return -EINVAL;
+ status = acpi_evaluate_integer(handle, "_STA", NULL, sta);
+ if (ACPI_SUCCESS(status))
+ return AE_OK;
- /*
- * Evaluate _STA if present.
- */
- if (device->flags.dynamic_status) {
- status =
- acpi_evaluate_integer(device->handle, "_STA", NULL, &sta);
- if (ACPI_FAILURE(status))
- return -ENODEV;
- STRUCT_TO_INT(device->status) = (int)sta;
+ if (status == AE_NOT_FOUND) {
+ *sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
+ return AE_OK;
}
+ return status;
+}
- /*
- * According to ACPI spec some device can be present and functional
- * even if the parent is not present but functional.
- * In such conditions the child device should not inherit the status
- * from the parent.
- */
- else
- STRUCT_TO_INT(device->status) =
- ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
- ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
+int acpi_bus_get_status(struct acpi_device *device)
+{
+ acpi_status status;
+ unsigned long long sta;
+
+ status = acpi_bus_get_status_handle(device->handle, &sta);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ STRUCT_TO_INT(device->status) = (int) sta;
if (device->status.functional && !device->status.present) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
device->pnp.bus_id,
(u32) STRUCT_TO_INT(device->status)));
-
return 0;
}
-
EXPORT_SYMBOL(acpi_bus_get_status);
void acpi_bus_private_data_handler(acpi_handle handle,
.release = single_release,
};
+static BLOCKING_NOTIFIER_HEAD(acpi_lid_notifier);
+static struct acpi_device *lid_device;
+
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
+int acpi_lid_notifier_register(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_register(&acpi_lid_notifier, nb);
+}
+EXPORT_SYMBOL(acpi_lid_notifier_register);
+
+int acpi_lid_notifier_unregister(struct notifier_block *nb)
+{
+ return blocking_notifier_chain_unregister(&acpi_lid_notifier, nb);
+}
+EXPORT_SYMBOL(acpi_lid_notifier_unregister);
+
+int acpi_lid_open(void)
+{
+ acpi_status status;
+ unsigned long long state;
+
+ if (!lid_device)
+ return -ENODEV;
+
+ status = acpi_evaluate_integer(lid_device->handle, "_LID", NULL,
+ &state);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ return !!state;
+}
+EXPORT_SYMBOL(acpi_lid_open);
+
static int acpi_lid_send_state(struct acpi_device *device)
{
struct acpi_button *button = acpi_driver_data(device);
unsigned long long state;
acpi_status status;
+ int ret;
status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
if (ACPI_FAILURE(status))
/* input layer checks if event is redundant */
input_report_switch(button->input, SW_LID, !state);
input_sync(button->input);
- return 0;
+
+ ret = blocking_notifier_call_chain(&acpi_lid_notifier, state, device);
+ if (ret == NOTIFY_DONE)
+ ret = blocking_notifier_call_chain(&acpi_lid_notifier, state,
+ device);
+ return ret;
}
static void acpi_button_notify(struct acpi_device *device, u32 event)
error = input_register_device(input);
if (error)
goto err_remove_fs;
- if (button->type == ACPI_BUTTON_TYPE_LID)
+ if (button->type == ACPI_BUTTON_TYPE_LID) {
acpi_lid_send_state(device);
+ /*
+ * This assumes there's only one lid device, or if there are
+ * more we only care about the last one...
+ */
+ lid_device = device;
+ }
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
struct list_head dependent_devices;
struct list_head hotplug_devices;
- struct list_head sibiling;
+ struct list_head sibling;
struct platform_device *dock_device;
};
static LIST_HEAD(dock_stations);
if (is_dock(handle))
return 1;
- list_for_each_entry(dock_station, &dock_stations, sibiling) {
+ list_for_each_entry(dock_station, &dock_stations, sibling) {
if (find_dock_dependent_device(dock_station, handle))
return 1;
}
* make sure this handle is for a device dependent on the dock,
* this would include the dock station itself
*/
- list_for_each_entry(dock_station, &dock_stations, sibiling) {
+ list_for_each_entry(dock_station, &dock_stations, sibling) {
/*
* An ATA bay can be in a dock and itself can be ejected
* seperately, so there are two 'dock stations' which need the
if (!dock_station_count)
return;
- list_for_each_entry(dock_station, &dock_stations, sibiling) {
+ list_for_each_entry(dock_station, &dock_stations, sibling) {
dd = find_dock_dependent_device(dock_station, handle);
if (dd)
dock_del_hotplug_device(dock_station, dd);
if (event != ACPI_NOTIFY_BUS_CHECK && event != ACPI_NOTIFY_DEVICE_CHECK
&& event != ACPI_NOTIFY_EJECT_REQUEST)
return 0;
- list_for_each_entry(dock_station, &dock_stations, sibiling) {
+ list_for_each_entry(dock_station, &dock_stations, sibling) {
if (dock_station->handle == handle) {
struct dock_data *dock_data;
dock_station->last_dock_time = jiffies - HZ;
INIT_LIST_HEAD(&dock_station->dependent_devices);
INIT_LIST_HEAD(&dock_station->hotplug_devices);
- INIT_LIST_HEAD(&dock_station->sibiling);
+ INIT_LIST_HEAD(&dock_station->sibling);
spin_lock_init(&dock_station->dd_lock);
mutex_init(&dock_station->hp_lock);
ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
add_dock_dependent_device(dock_station, dd);
dock_station_count++;
- list_add(&dock_station->sibiling, &dock_stations);
+ list_add(&dock_station->sibling, &dock_stations);
return 0;
dock_add_err_unregister:
struct dock_station *tmp;
unregister_acpi_bus_notifier(&dock_acpi_notifier);
- list_for_each_entry_safe(dock_station, tmp, &dock_stations, sibiling)
+ list_for_each_entry_safe(dock_station, tmp, &dock_stations, sibling)
dock_remove(dock_station);
}
} *boot_ec, *first_ec;
static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
+static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
+static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
/* --------------------------------------------------------------------------
Transaction Management
}
advance_transaction(ec, acpi_ec_read_status(ec));
} while (time_before(jiffies, delay));
- if (!ec->curr->irq_count ||
- (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF))
+ if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
break;
- /* try restart command if we get any false interrupts */
pr_debug(PREFIX "controller reset, restart transaction\n");
spin_lock_irqsave(&ec->curr_lock, flags);
start_transaction(ec);
{"", 0},
};
+/* Some BIOS do not survive early DSDT scan, skip it */
+static int ec_skip_dsdt_scan(const struct dmi_system_id *id)
+{
+ EC_FLAGS_SKIP_DSDT_SCAN = 1;
+ return 0;
+}
+
+/* ASUStek often supplies us with broken ECDT, validate it */
+static int ec_validate_ecdt(const struct dmi_system_id *id)
+{
+ EC_FLAGS_VALIDATE_ECDT = 1;
+ return 0;
+}
+
+/* MSI EC needs special treatment, enable it */
+static int ec_flag_msi(const struct dmi_system_id *id)
+{
+ EC_FLAGS_MSI = 1;
+ EC_FLAGS_VALIDATE_ECDT = 1;
+ return 0;
+}
+
+static struct dmi_system_id __initdata ec_dmi_table[] = {
+ {
+ ec_skip_dsdt_scan, "Compal JFL92", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_BOARD_NAME, "JFL92") }, NULL},
+ {
+ ec_flag_msi, "MSI hardware", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "Micro-Star"),
+ DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star") }, NULL},
+ {
+ ec_validate_ecdt, "ASUS hardware", {
+ DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
+ {},
+};
+
+
int __init acpi_ec_ecdt_probe(void)
{
acpi_status status;
/*
* Generate a boot ec context
*/
- if (dmi_name_in_vendors("Micro-Star") ||
- dmi_name_in_vendors("Notebook")) {
- pr_info(PREFIX "Enabling special treatment for EC from MSI.\n");
- EC_FLAGS_MSI = 1;
- }
+ dmi_check_system(ec_dmi_table);
status = acpi_get_table(ACPI_SIG_ECDT, 1,
(struct acpi_table_header **)&ecdt_ptr);
if (ACPI_SUCCESS(status)) {
boot_ec->handle = ACPI_ROOT_OBJECT;
acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
/* Don't trust ECDT, which comes from ASUSTek */
- if (!dmi_name_in_vendors("ASUS") && EC_FLAGS_MSI == 0)
+ if (!EC_FLAGS_VALIDATE_ECDT)
goto install;
saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
if (!saved_ec)
memcpy(saved_ec, boot_ec, sizeof(struct acpi_ec));
/* fall through */
}
+
+ if (EC_FLAGS_SKIP_DSDT_SCAN)
+ return -ENODEV;
+
/* This workaround is needed only on some broken machines,
* which require early EC, but fail to provide ECDT */
printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
static void bind_to_cpu0(struct work_struct *work)
{
- set_cpus_allowed(current, cpumask_of_cpu(0));
+ set_cpus_allowed_ptr(current, cpumask_of(0));
kfree(work);
}
res_list_elem->name,
(long long) res_list_elem->start,
(long long) res_list_elem->end);
- printk(KERN_INFO "ACPI: Device needs an ACPI driver\n");
+ if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX)
+ printk(KERN_NOTICE "ACPI: This conflict may"
+ " cause random problems and system"
+ " instability\n");
+ printk(KERN_INFO "ACPI: If an ACPI driver is available"
+ " for this device, you should use it instead of"
+ " the native driver\n");
}
if (acpi_enforce_resources == ENFORCE_RESOURCES_STRICT)
return -EBUSY;
pbus = pdev->subordinate;
pci_dev_put(pdev);
+
+ /*
+ * This function may be called for a non-PCI device that has a
+ * PCI parent (eg. a disk under a PCI SATA controller). In that
+ * case pdev->subordinate will be NULL for the parent.
+ */
+ if (!pbus) {
+ dev_dbg(&pdev->dev, "Not a PCI-to-PCI bridge\n");
+ pdev = NULL;
+ break;
+ }
}
out:
list_for_each_entry_safe(node, tmp, &device_list, node)
if (len > 4)
len = 4;
+ if (len < 0)
+ return -EFAULT;
if (copy_from_user(strbuf, buffer, len))
return -EFAULT;
goto err_remove_sysfs;
}
- if (pr->flags.throttling) {
- printk(KERN_INFO PREFIX "%s [%s] (supports",
- acpi_device_name(device), acpi_device_bid(device));
- printk(" %d throttling states", pr->throttling.state_count);
- printk(")\n");
- }
-
return 0;
err_remove_sysfs:
#ifdef CONFIG_ACPI_PROCFS
struct proc_dir_entry *entry = NULL;
#endif
- unsigned int i;
if (boot_option_idle_override)
return 0;
acpi_processor_setup_cpuidle(pr);
if (cpuidle_register_device(&pr->power.dev))
return -EIO;
-
- printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
- for (i = 1; i <= pr->power.count; i++)
- if (pr->power.states[i].valid)
- printk(" C%d[C%d]", i,
- pr->power.states[i].type);
- printk(")\n");
}
#ifdef CONFIG_ACPI_PROCFS
/* 'power' [R] */
struct acpi_processor *match_pr;
struct acpi_psd_package *match_pdomain;
- if (!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))
return -ENOMEM;
mutex_lock(&performance_mutex);
* Now that we have _PSD data from all CPUs, lets setup P-state
* domain info.
*/
- cpumask_clear(covered_cpus);
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
struct acpi_tsd_package *pdomain, *match_pdomain;
struct acpi_processor_throttling *pthrottling, *match_pthrottling;
- if (!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))
return -ENOMEM;
/*
if (retval)
goto err_ret;
- cpumask_clear(covered_cpus);
for_each_possible_cpu(i) {
pr = per_cpu(processors, i);
if (!pr)
#define ACPI_BUS_HID "LNXSYBUS"
#define ACPI_BUS_DEVICE_NAME "System Bus"
+#define ACPI_IS_ROOT_DEVICE(device) (!(device)->parent)
+
static LIST_HEAD(acpi_device_list);
static LIST_HEAD(acpi_bus_id_list);
DEFINE_MUTEX(acpi_device_lock);
{
int len;
int count;
-
- if (!acpi_dev->flags.hardware_id && !acpi_dev->flags.compatible_ids)
- return -ENODEV;
+ struct acpi_hardware_id *id;
len = snprintf(modalias, size, "acpi:");
size -= len;
- if (acpi_dev->flags.hardware_id) {
- count = snprintf(&modalias[len], size, "%s:",
- acpi_dev->pnp.hardware_id);
+ list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
+ count = snprintf(&modalias[len], size, "%s:", id->id);
if (count < 0 || count >= size)
return -EINVAL;
len += count;
size -= count;
}
- if (acpi_dev->flags.compatible_ids) {
- struct acpica_device_id_list *cid_list;
- int i;
-
- cid_list = acpi_dev->pnp.cid_list;
- for (i = 0; i < cid_list->count; i++) {
- count = snprintf(&modalias[len], size, "%s:",
- cid_list->ids[i].string);
- if (count < 0 || count >= size) {
- printk(KERN_ERR PREFIX "%s cid[%i] exceeds event buffer size",
- acpi_dev->pnp.device_name, i);
- break;
- }
- len += count;
- size -= count;
- }
- }
-
modalias[len] = '\0';
return len;
}
acpi_device_hid_show(struct device *dev, struct device_attribute *attr, char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
- return sprintf(buf, "%s\n", acpi_dev->pnp.hardware_id);
+ return sprintf(buf, "%s\n", acpi_device_hid(acpi_dev));
}
static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
goto end;
}
- if (dev->flags.hardware_id) {
- result = device_create_file(&dev->dev, &dev_attr_hid);
- if (result)
- goto end;
- }
+ result = device_create_file(&dev->dev, &dev_attr_hid);
+ if (result)
+ goto end;
- if (dev->flags.hardware_id || dev->flags.compatible_ids) {
- result = device_create_file(&dev->dev, &dev_attr_modalias);
- if (result)
- goto end;
- }
+ result = device_create_file(&dev->dev, &dev_attr_modalias);
+ if (result)
+ goto end;
/*
* If device has _EJ0, 'eject' file is created that is used to trigger
if (ACPI_SUCCESS(status))
device_remove_file(&dev->dev, &dev_attr_eject);
- if (dev->flags.hardware_id || dev->flags.compatible_ids)
- device_remove_file(&dev->dev, &dev_attr_modalias);
-
- if (dev->flags.hardware_id)
- device_remove_file(&dev->dev, &dev_attr_hid);
+ device_remove_file(&dev->dev, &dev_attr_modalias);
+ device_remove_file(&dev->dev, &dev_attr_hid);
if (dev->handle)
device_remove_file(&dev->dev, &dev_attr_path);
}
const struct acpi_device_id *ids)
{
const struct acpi_device_id *id;
+ struct acpi_hardware_id *hwid;
/*
* If the device is not present, it is unnecessary to load device
if (!device->status.present)
return -ENODEV;
- if (device->flags.hardware_id) {
- for (id = ids; id->id[0]; id++) {
- if (!strcmp((char*)id->id, device->pnp.hardware_id))
+ for (id = ids; id->id[0]; id++)
+ list_for_each_entry(hwid, &device->pnp.ids, list)
+ if (!strcmp((char *) id->id, hwid->id))
return 0;
- }
- }
-
- if (device->flags.compatible_ids) {
- struct acpica_device_id_list *cid_list = device->pnp.cid_list;
- int i;
-
- for (id = ids; id->id[0]; id++) {
- /* compare multiple _CID entries against driver ids */
- for (i = 0; i < cid_list->count; i++) {
- if (!strcmp((char*)id->id,
- cid_list->ids[i].string))
- return 0;
- }
- }
- }
return -ENOENT;
}
EXPORT_SYMBOL(acpi_match_device_ids);
+static void acpi_free_ids(struct acpi_device *device)
+{
+ struct acpi_hardware_id *id, *tmp;
+
+ list_for_each_entry_safe(id, tmp, &device->pnp.ids, list) {
+ kfree(id->id);
+ kfree(id);
+ }
+}
+
static void acpi_device_release(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
- kfree(acpi_dev->pnp.cid_list);
- if (acpi_dev->flags.hardware_id)
- kfree(acpi_dev->pnp.hardware_id);
- if (acpi_dev->flags.unique_id)
- kfree(acpi_dev->pnp.unique_id);
+ acpi_free_ids(acpi_dev);
kfree(acpi_dev);
}
static int acpi_device_install_notify_handler(struct acpi_device *device)
{
acpi_status status;
- char *hid;
- hid = acpi_device_hid(device);
- if (!strcmp(hid, ACPI_BUTTON_HID_POWERF))
+ if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
acpi_device_notify_fixed,
device);
- else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF))
+ else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
status =
acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
acpi_device_notify_fixed,
static void acpi_device_remove_notify_handler(struct acpi_device *device)
{
- if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF))
+ if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
acpi_device_notify_fixed);
- else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF))
+ else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
acpi_device_notify_fixed);
else
.uevent = acpi_device_uevent,
};
-static int acpi_device_register(struct acpi_device *device,
- struct acpi_device *parent)
+static int acpi_device_register(struct acpi_device *device)
{
int result;
struct acpi_device_bus_id *acpi_device_bus_id, *new_bus_id;
int found = 0;
+
/*
* Linkage
* -------
* If failed, create one and link it into acpi_bus_id_list
*/
list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node) {
- if(!strcmp(acpi_device_bus_id->bus_id, device->flags.hardware_id? device->pnp.hardware_id : "device")) {
- acpi_device_bus_id->instance_no ++;
+ if (!strcmp(acpi_device_bus_id->bus_id,
+ acpi_device_hid(device))) {
+ acpi_device_bus_id->instance_no++;
found = 1;
kfree(new_bus_id);
break;
}
if (!found) {
acpi_device_bus_id = new_bus_id;
- strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
+ strcpy(acpi_device_bus_id->bus_id, acpi_device_hid(device));
acpi_device_bus_id->instance_no = 0;
list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
}
mutex_unlock(&acpi_device_lock);
if (device->parent)
- device->dev.parent = &parent->dev;
+ device->dev.parent = &device->parent->dev;
device->dev.bus = &acpi_bus_type;
device->dev.release = &acpi_device_release;
result = device_register(&device->dev);
/* --------------------------------------------------------------------------
Device Enumeration
-------------------------------------------------------------------------- */
+static struct acpi_device *acpi_bus_get_parent(acpi_handle handle)
+{
+ acpi_status status;
+ int ret;
+ struct acpi_device *device;
+
+ /*
+ * Fixed hardware devices do not appear in the namespace and do not
+ * have handles, but we fabricate acpi_devices for them, so we have
+ * to deal with them specially.
+ */
+ if (handle == NULL)
+ return acpi_root;
+
+ do {
+ status = acpi_get_parent(handle, &handle);
+ if (status == AE_NULL_ENTRY)
+ return NULL;
+ if (ACPI_FAILURE(status))
+ return acpi_root;
+
+ ret = acpi_bus_get_device(handle, &device);
+ if (ret == 0)
+ return device;
+ } while (1);
+}
+
acpi_status
acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd)
{
if (ACPI_SUCCESS(status))
device->flags.dynamic_status = 1;
- /* Presence of _CID indicates 'compatible_ids' */
- status = acpi_get_handle(device->handle, "_CID", &temp);
- if (ACPI_SUCCESS(status))
- device->flags.compatible_ids = 1;
-
/* Presence of _RMV indicates 'removable' */
status = acpi_get_handle(device->handle, "_RMV", &temp);
if (ACPI_SUCCESS(status))
return 0;
}
-static void acpi_device_get_busid(struct acpi_device *device,
- acpi_handle handle, int type)
+static void acpi_device_get_busid(struct acpi_device *device)
{
char bus_id[5] = { '?', 0 };
struct acpi_buffer buffer = { sizeof(bus_id), bus_id };
* The device's Bus ID is simply the object name.
* TBD: Shouldn't this value be unique (within the ACPI namespace)?
*/
- switch (type) {
- case ACPI_BUS_TYPE_SYSTEM:
+ if (ACPI_IS_ROOT_DEVICE(device)) {
strcpy(device->pnp.bus_id, "ACPI");
- break;
+ return;
+ }
+
+ switch (device->device_type) {
case ACPI_BUS_TYPE_POWER_BUTTON:
strcpy(device->pnp.bus_id, "PWRF");
break;
strcpy(device->pnp.bus_id, "SLPF");
break;
default:
- acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
+ acpi_get_name(device->handle, ACPI_SINGLE_NAME, &buffer);
/* Clean up trailing underscores (if any) */
for (i = 3; i > 1; i--) {
if (bus_id[i] == '_')
return acpi_get_handle(device->handle, "_DCK", &tmp);
}
-static struct acpica_device_id_list*
-acpi_add_cid(
- struct acpi_device_info *info,
- struct acpica_device_id *new_cid)
+char *acpi_device_hid(struct acpi_device *device)
{
- struct acpica_device_id_list *cid;
- char *next_id_string;
- acpi_size cid_length;
- acpi_size new_cid_length;
- u32 i;
-
-
- /* Allocate new CID list with room for the new CID */
-
- if (!new_cid)
- new_cid_length = info->compatible_id_list.list_size;
- else if (info->compatible_id_list.list_size)
- new_cid_length = info->compatible_id_list.list_size +
- new_cid->length + sizeof(struct acpica_device_id);
- else
- new_cid_length = sizeof(struct acpica_device_id_list) + new_cid->length;
-
- cid = ACPI_ALLOCATE_ZEROED(new_cid_length);
- if (!cid) {
- return NULL;
- }
-
- cid->list_size = new_cid_length;
- cid->count = info->compatible_id_list.count;
- if (new_cid)
- cid->count++;
- next_id_string = (char *) cid->ids + (cid->count * sizeof(struct acpica_device_id));
-
- /* Copy all existing CIDs */
-
- for (i = 0; i < info->compatible_id_list.count; i++) {
- cid_length = info->compatible_id_list.ids[i].length;
- cid->ids[i].string = next_id_string;
- cid->ids[i].length = cid_length;
+ struct acpi_hardware_id *hid;
- ACPI_MEMCPY(next_id_string, info->compatible_id_list.ids[i].string,
- cid_length);
-
- next_id_string += cid_length;
- }
+ hid = list_first_entry(&device->pnp.ids, struct acpi_hardware_id, list);
+ return hid->id;
+}
+EXPORT_SYMBOL(acpi_device_hid);
- /* Append the new CID */
+static void acpi_add_id(struct acpi_device *device, const char *dev_id)
+{
+ struct acpi_hardware_id *id;
- if (new_cid) {
- cid->ids[i].string = next_id_string;
- cid->ids[i].length = new_cid->length;
+ id = kmalloc(sizeof(*id), GFP_KERNEL);
+ if (!id)
+ return;
- ACPI_MEMCPY(next_id_string, new_cid->string, new_cid->length);
+ id->id = kmalloc(strlen(dev_id) + 1, GFP_KERNEL);
+ if (!id->id) {
+ kfree(id);
+ return;
}
- return cid;
+ strcpy(id->id, dev_id);
+ list_add_tail(&id->list, &device->pnp.ids);
}
-static void acpi_device_set_id(struct acpi_device *device,
- struct acpi_device *parent, acpi_handle handle,
- int type)
+static void acpi_device_set_id(struct acpi_device *device)
{
- struct acpi_device_info *info = NULL;
- char *hid = NULL;
- char *uid = NULL;
- struct acpica_device_id_list *cid_list = NULL;
- char *cid_add = NULL;
acpi_status status;
+ struct acpi_device_info *info;
+ struct acpica_device_id_list *cid_list;
+ int i;
- switch (type) {
+ switch (device->device_type) {
case ACPI_BUS_TYPE_DEVICE:
- status = acpi_get_object_info(handle, &info);
+ if (ACPI_IS_ROOT_DEVICE(device)) {
+ acpi_add_id(device, ACPI_SYSTEM_HID);
+ break;
+ } else if (ACPI_IS_ROOT_DEVICE(device->parent)) {
+ /* \_SB_, the only root-level namespace device */
+ acpi_add_id(device, ACPI_BUS_HID);
+ strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
+ strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
+ break;
+ }
+
+ status = acpi_get_object_info(device->handle, &info);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX "%s: Error reading device info\n", __func__);
return;
}
if (info->valid & ACPI_VALID_HID)
- hid = info->hardware_id.string;
- if (info->valid & ACPI_VALID_UID)
- uid = info->unique_id.string;
- if (info->valid & ACPI_VALID_CID)
+ acpi_add_id(device, info->hardware_id.string);
+ if (info->valid & ACPI_VALID_CID) {
cid_list = &info->compatible_id_list;
+ for (i = 0; i < cid_list->count; i++)
+ acpi_add_id(device, cid_list->ids[i].string);
+ }
if (info->valid & ACPI_VALID_ADR) {
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
- /* If we have a video/bay/dock device, add our selfdefined
- HID to the CID list. Like that the video/bay/dock drivers
- will get autoloaded and the device might still match
- against another driver.
- */
+ kfree(info);
+
+ /*
+ * Some devices don't reliably have _HIDs & _CIDs, so add
+ * synthetic HIDs to make sure drivers can find them.
+ */
if (acpi_is_video_device(device))
- cid_add = ACPI_VIDEO_HID;
+ acpi_add_id(device, ACPI_VIDEO_HID);
else if (ACPI_SUCCESS(acpi_bay_match(device)))
- cid_add = ACPI_BAY_HID;
+ acpi_add_id(device, ACPI_BAY_HID);
else if (ACPI_SUCCESS(acpi_dock_match(device)))
- cid_add = ACPI_DOCK_HID;
+ acpi_add_id(device, ACPI_DOCK_HID);
break;
case ACPI_BUS_TYPE_POWER:
- hid = ACPI_POWER_HID;
+ acpi_add_id(device, ACPI_POWER_HID);
break;
case ACPI_BUS_TYPE_PROCESSOR:
- hid = ACPI_PROCESSOR_OBJECT_HID;
- break;
- case ACPI_BUS_TYPE_SYSTEM:
- hid = ACPI_SYSTEM_HID;
+ acpi_add_id(device, ACPI_PROCESSOR_OBJECT_HID);
break;
case ACPI_BUS_TYPE_THERMAL:
- hid = ACPI_THERMAL_HID;
+ acpi_add_id(device, ACPI_THERMAL_HID);
break;
case ACPI_BUS_TYPE_POWER_BUTTON:
- hid = ACPI_BUTTON_HID_POWERF;
+ acpi_add_id(device, ACPI_BUTTON_HID_POWERF);
break;
case ACPI_BUS_TYPE_SLEEP_BUTTON:
- hid = ACPI_BUTTON_HID_SLEEPF;
+ acpi_add_id(device, ACPI_BUTTON_HID_SLEEPF);
break;
}
/*
- * \_SB
- * ----
- * Fix for the system root bus device -- the only root-level device.
+ * We build acpi_devices for some objects that don't have _HID or _CID,
+ * e.g., PCI bridges and slots. Drivers can't bind to these objects,
+ * but we do use them indirectly by traversing the acpi_device tree.
+ * This generic ID isn't useful for driver binding, but it provides
+ * the useful property that "every acpi_device has an ID."
*/
- if (((acpi_handle)parent == ACPI_ROOT_OBJECT) && (type == ACPI_BUS_TYPE_DEVICE)) {
- hid = ACPI_BUS_HID;
- strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
- strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
- }
-
- if (hid) {
- device->pnp.hardware_id = ACPI_ALLOCATE_ZEROED(strlen (hid) + 1);
- if (device->pnp.hardware_id) {
- strcpy(device->pnp.hardware_id, hid);
- device->flags.hardware_id = 1;
- }
- }
- if (!device->flags.hardware_id)
- device->pnp.hardware_id = "";
-
- if (uid) {
- device->pnp.unique_id = ACPI_ALLOCATE_ZEROED(strlen (uid) + 1);
- if (device->pnp.unique_id) {
- strcpy(device->pnp.unique_id, uid);
- device->flags.unique_id = 1;
- }
- }
- if (!device->flags.unique_id)
- device->pnp.unique_id = "";
-
- if (cid_list || cid_add) {
- struct acpica_device_id_list *list;
-
- if (cid_add) {
- struct acpica_device_id cid;
- cid.length = strlen (cid_add) + 1;
- cid.string = cid_add;
-
- list = acpi_add_cid(info, &cid);
- } else {
- list = acpi_add_cid(info, NULL);
- }
-
- if (list) {
- device->pnp.cid_list = list;
- if (cid_add)
- device->flags.compatible_ids = 1;
- }
- }
-
- kfree(info);
+ if (list_empty(&device->pnp.ids))
+ acpi_add_id(device, "device");
}
-static int acpi_device_set_context(struct acpi_device *device, int type)
+static int acpi_device_set_context(struct acpi_device *device)
{
- acpi_status status = AE_OK;
- int result = 0;
+ acpi_status status;
+
/*
* Context
* -------
* Attach this 'struct acpi_device' to the ACPI object. This makes
- * resolutions from handle->device very efficient. Note that we need
- * to be careful with fixed-feature devices as they all attach to the
- * root object.
+ * resolutions from handle->device very efficient. Fixed hardware
+ * devices have no handles, so we skip them.
*/
- if (type != ACPI_BUS_TYPE_POWER_BUTTON &&
- type != ACPI_BUS_TYPE_SLEEP_BUTTON) {
- status = acpi_attach_data(device->handle,
- acpi_bus_data_handler, device);
+ if (!device->handle)
+ return 0;
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error attaching device data\n");
- result = -ENODEV;
- }
- }
- return result;
+ status = acpi_attach_data(device->handle,
+ acpi_bus_data_handler, device);
+ if (ACPI_SUCCESS(status))
+ return 0;
+
+ printk(KERN_ERR PREFIX "Error attaching device data\n");
+ return -ENODEV;
}
static int acpi_bus_remove(struct acpi_device *dev, int rmdevice)
return 0;
}
-static int
-acpi_add_single_object(struct acpi_device **child,
- struct acpi_device *parent, acpi_handle handle, int type,
- struct acpi_bus_ops *ops)
+static int acpi_add_single_object(struct acpi_device **child,
+ acpi_handle handle, int type,
+ unsigned long long sta,
+ struct acpi_bus_ops *ops)
{
- int result = 0;
- struct acpi_device *device = NULL;
-
-
- if (!child)
- return -EINVAL;
+ int result;
+ struct acpi_device *device;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
device = kzalloc(sizeof(struct acpi_device), GFP_KERNEL);
if (!device) {
return -ENOMEM;
}
+ INIT_LIST_HEAD(&device->pnp.ids);
+ device->device_type = type;
device->handle = handle;
- device->parent = parent;
+ device->parent = acpi_bus_get_parent(handle);
device->bus_ops = *ops; /* workround for not call .start */
+ STRUCT_TO_INT(device->status) = sta;
-
- acpi_device_get_busid(device, handle, type);
+ acpi_device_get_busid(device);
/*
* Flags
* -----
- * Get prior to calling acpi_bus_get_status() so we know whether
- * or not _STA is present. Note that we only look for object
- * handles -- cannot evaluate objects until we know the device is
- * present and properly initialized.
+ * Note that we only look for object handles -- cannot evaluate objects
+ * until we know the device is present and properly initialized.
*/
result = acpi_bus_get_flags(device);
if (result)
goto end;
- /*
- * Status
- * ------
- * See if the device is present. We always assume that non-Device
- * and non-Processor objects (e.g. thermal zones, power resources,
- * etc.) are present, functioning, etc. (at least when parent object
- * is present). Note that _STA has a different meaning for some
- * objects (e.g. power resources) so we need to be careful how we use
- * it.
- */
- switch (type) {
- case ACPI_BUS_TYPE_PROCESSOR:
- case ACPI_BUS_TYPE_DEVICE:
- result = acpi_bus_get_status(device);
- if (ACPI_FAILURE(result)) {
- result = -ENODEV;
- goto end;
- }
- /*
- * When the device is neither present nor functional, the
- * device should not be added to Linux ACPI device tree.
- * When the status of the device is not present but functinal,
- * it should be added to Linux ACPI tree. For example : bay
- * device , dock device.
- * In such conditions it is unncessary to check whether it is
- * bay device or dock device.
- */
- if (!device->status.present && !device->status.functional) {
- result = -ENODEV;
- goto end;
- }
- break;
- default:
- STRUCT_TO_INT(device->status) =
- ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
- ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING;
- break;
- }
-
/*
* Initialize Device
* -----------------
* TBD: Synch with Core's enumeration/initialization process.
*/
-
- /*
- * Hardware ID, Unique ID, & Bus Address
- * -------------------------------------
- */
- acpi_device_set_id(device, parent, handle, type);
+ acpi_device_set_id(device);
/*
* Power Management
goto end;
}
- if ((result = acpi_device_set_context(device, type)))
+ if ((result = acpi_device_set_context(device)))
goto end;
- result = acpi_device_register(device, parent);
+ result = acpi_device_register(device);
/*
* Bind _ADR-Based Devices when hot add
}
end:
- if (!result)
+ if (!result) {
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Adding %s [%s] parent %s\n", dev_name(&device->dev),
+ (char *) buffer.pointer,
+ device->parent ? dev_name(&device->parent->dev) :
+ "(null)"));
+ kfree(buffer.pointer);
*child = device;
- else
+ } else
acpi_device_release(&device->dev);
return result;
}
-static int acpi_bus_scan(struct acpi_device *start, struct acpi_bus_ops *ops)
-{
- acpi_status status = AE_OK;
- struct acpi_device *parent = NULL;
- struct acpi_device *child = NULL;
- acpi_handle phandle = NULL;
- acpi_handle chandle = NULL;
- acpi_object_type type = 0;
- u32 level = 1;
-
+#define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \
+ ACPI_STA_DEVICE_UI | ACPI_STA_DEVICE_FUNCTIONING)
- if (!start)
- return -EINVAL;
+static int acpi_bus_type_and_status(acpi_handle handle, int *type,
+ unsigned long long *sta)
+{
+ acpi_status status;
+ acpi_object_type acpi_type;
- parent = start;
- phandle = start->handle;
+ status = acpi_get_type(handle, &acpi_type);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
- /*
- * Parse through the ACPI namespace, identify all 'devices', and
- * create a new 'struct acpi_device' for each.
- */
- while ((level > 0) && parent) {
+ switch (acpi_type) {
+ case ACPI_TYPE_ANY: /* for ACPI_ROOT_OBJECT */
+ case ACPI_TYPE_DEVICE:
+ *type = ACPI_BUS_TYPE_DEVICE;
+ status = acpi_bus_get_status_handle(handle, sta);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ break;
+ case ACPI_TYPE_PROCESSOR:
+ *type = ACPI_BUS_TYPE_PROCESSOR;
+ status = acpi_bus_get_status_handle(handle, sta);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+ break;
+ case ACPI_TYPE_THERMAL:
+ *type = ACPI_BUS_TYPE_THERMAL;
+ *sta = ACPI_STA_DEFAULT;
+ break;
+ case ACPI_TYPE_POWER:
+ *type = ACPI_BUS_TYPE_POWER;
+ *sta = ACPI_STA_DEFAULT;
+ break;
+ default:
+ return -ENODEV;
+ }
- status = acpi_get_next_object(ACPI_TYPE_ANY, phandle,
- chandle, &chandle);
+ return 0;
+}
- /*
- * If this scope is exhausted then move our way back up.
- */
- if (ACPI_FAILURE(status)) {
- level--;
- chandle = phandle;
- acpi_get_parent(phandle, &phandle);
- if (parent->parent)
- parent = parent->parent;
- continue;
- }
+static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl,
+ void *context, void **return_value)
+{
+ struct acpi_bus_ops *ops = context;
+ int type;
+ unsigned long long sta;
+ struct acpi_device *device;
+ acpi_status status;
+ int result;
- status = acpi_get_type(chandle, &type);
- if (ACPI_FAILURE(status))
- continue;
+ result = acpi_bus_type_and_status(handle, &type, &sta);
+ if (result)
+ return AE_OK;
- /*
- * If this is a scope object then parse it (depth-first).
- */
- if (type == ACPI_TYPE_LOCAL_SCOPE) {
- level++;
- phandle = chandle;
- chandle = NULL;
- continue;
- }
+ if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
+ !(sta & ACPI_STA_DEVICE_FUNCTIONING))
+ return AE_CTRL_DEPTH;
- /*
- * We're only interested in objects that we consider 'devices'.
- */
- switch (type) {
- case ACPI_TYPE_DEVICE:
- type = ACPI_BUS_TYPE_DEVICE;
- break;
- case ACPI_TYPE_PROCESSOR:
- type = ACPI_BUS_TYPE_PROCESSOR;
- break;
- case ACPI_TYPE_THERMAL:
- type = ACPI_BUS_TYPE_THERMAL;
- break;
- case ACPI_TYPE_POWER:
- type = ACPI_BUS_TYPE_POWER;
- break;
- default:
- continue;
- }
+ /*
+ * We may already have an acpi_device from a previous enumeration. If
+ * so, we needn't add it again, but we may still have to start it.
+ */
+ device = NULL;
+ acpi_bus_get_device(handle, &device);
+ if (ops->acpi_op_add && !device)
+ acpi_add_single_object(&device, handle, type, sta, ops);
- if (ops->acpi_op_add)
- status = acpi_add_single_object(&child, parent,
- chandle, type, ops);
- else
- status = acpi_bus_get_device(chandle, &child);
+ if (!device)
+ return AE_CTRL_DEPTH;
+ if (ops->acpi_op_start && !(ops->acpi_op_add)) {
+ status = acpi_start_single_object(device);
if (ACPI_FAILURE(status))
- continue;
+ return AE_CTRL_DEPTH;
+ }
- if (ops->acpi_op_start && !(ops->acpi_op_add)) {
- status = acpi_start_single_object(child);
- if (ACPI_FAILURE(status))
- continue;
- }
+ if (!*return_value)
+ *return_value = device;
+ return AE_OK;
+}
- /*
- * If the device is present, enabled, and functioning then
- * parse its scope (depth-first). Note that we need to
- * represent absent devices to facilitate PnP notifications
- * -- but only the subtree head (not all of its children,
- * which will be enumerated when the parent is inserted).
- *
- * TBD: Need notifications and other detection mechanisms
- * in place before we can fully implement this.
- */
- /*
- * When the device is not present but functional, it is also
- * necessary to scan the children of this device.
- */
- if (child->status.present || (!child->status.present &&
- child->status.functional)) {
- status = acpi_get_next_object(ACPI_TYPE_ANY, chandle,
- NULL, NULL);
- if (ACPI_SUCCESS(status)) {
- level++;
- phandle = chandle;
- chandle = NULL;
- parent = child;
- }
- }
- }
+static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops,
+ struct acpi_device **child)
+{
+ acpi_status status;
+ void *device = NULL;
+
+ status = acpi_bus_check_add(handle, 0, ops, &device);
+ if (ACPI_SUCCESS(status))
+ acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
+ acpi_bus_check_add, ops, &device);
+ if (child)
+ *child = device;
return 0;
}
acpi_bus_add(struct acpi_device **child,
struct acpi_device *parent, acpi_handle handle, int type)
{
- int result;
struct acpi_bus_ops ops;
memset(&ops, 0, sizeof(ops));
ops.acpi_op_add = 1;
- result = acpi_add_single_object(child, parent, handle, type, &ops);
- if (!result)
- result = acpi_bus_scan(*child, &ops);
-
- return result;
+ acpi_bus_scan(handle, &ops, child);
+ return 0;
}
EXPORT_SYMBOL(acpi_bus_add);
int acpi_bus_start(struct acpi_device *device)
{
- int result;
struct acpi_bus_ops ops;
+ memset(&ops, 0, sizeof(ops));
+ ops.acpi_op_start = 1;
- if (!device)
- return -EINVAL;
-
- result = acpi_start_single_object(device);
- if (!result) {
- memset(&ops, 0, sizeof(ops));
- ops.acpi_op_start = 1;
- result = acpi_bus_scan(device, &ops);
- }
- return result;
+ acpi_bus_scan(device->handle, &ops, NULL);
+ return 0;
}
EXPORT_SYMBOL(acpi_bus_start);
}
EXPORT_SYMBOL_GPL(acpi_bus_trim);
-static int acpi_bus_scan_fixed(struct acpi_device *root)
+static int acpi_bus_scan_fixed(void)
{
int result = 0;
struct acpi_device *device = NULL;
struct acpi_bus_ops ops;
- if (!root)
- return -ENODEV;
-
memset(&ops, 0, sizeof(ops));
ops.acpi_op_add = 1;
ops.acpi_op_start = 1;
* Enumerate all fixed-feature devices.
*/
if ((acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON) == 0) {
- result = acpi_add_single_object(&device, acpi_root,
- NULL,
+ result = acpi_add_single_object(&device, NULL,
ACPI_BUS_TYPE_POWER_BUTTON,
+ ACPI_STA_DEFAULT,
&ops);
}
if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) {
- result = acpi_add_single_object(&device, acpi_root,
- NULL,
+ result = acpi_add_single_object(&device, NULL,
ACPI_BUS_TYPE_SLEEP_BUTTON,
+ ACPI_STA_DEFAULT,
&ops);
}
printk(KERN_ERR PREFIX "Could not register bus type\n");
}
- /*
- * Create the root device in the bus's device tree
- */
- result = acpi_add_single_object(&acpi_root, NULL, ACPI_ROOT_OBJECT,
- ACPI_BUS_TYPE_SYSTEM, &ops);
- if (result)
- goto Done;
-
/*
* Enumerate devices in the ACPI namespace.
*/
- result = acpi_bus_scan_fixed(acpi_root);
+ result = acpi_bus_scan(ACPI_ROOT_OBJECT, &ops, &acpi_root);
if (!result)
- result = acpi_bus_scan(acpi_root, &ops);
+ result = acpi_bus_scan_fixed();
if (result)
acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
-Done:
return result;
}
struct file *file);
static ssize_t acpi_video_device_write_brightness(struct file *file,
const char __user *buffer, size_t count, loff_t *data);
-static struct file_operations acpi_video_device_brightness_fops = {
+static const struct file_operations acpi_video_device_brightness_fops = {
.owner = THIS_MODULE,
.open = acpi_video_device_brightness_open_fs,
.read = seq_read,
*/
/* Does this device support video switching? */
- if (video->cap._DOS) {
+ if (video->cap._DOS || video->cap._DOD) {
+ if (!video->cap._DOS) {
+ printk(KERN_WARNING FW_BUG
+ "ACPI(%s) defines _DOD but not _DOS\n",
+ acpi_device_bid(video->device));
+ }
video->flags.multihead = 1;
status = 0;
}
result = acpi_video_device_lcd_set_level(device, level_next);
+ if (!result)
+ backlight_force_update(device->backlight,
+ BACKLIGHT_UPDATE_HOTKEY);
+
out:
if (result)
printk(KERN_ERR PREFIX "Failed to switch the brightness\n");
return 0;
/* Does this device able to support video switching ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) &&
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) ||
ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
HOST_EM_LOC = 0x1c, /* Enclosure Management location */
HOST_EM_CTL = 0x20, /* Enclosure Management Control */
+ HOST_CAP2 = 0x24, /* host capabilities, extended */
/* HOST_CTL bits */
HOST_RESET = (1 << 0), /* reset controller; self-clear */
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
/* HOST_CAP bits */
+ HOST_CAP_SXS = (1 << 5), /* Supports External SATA */
HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */
- HOST_CAP_SSC = (1 << 14), /* Slumber capable */
+ HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */
+ HOST_CAP_PART = (1 << 13), /* Partial state capable */
+ HOST_CAP_SSC = (1 << 14), /* Slumber state capable */
+ HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */
+ HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */
HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
+ HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
+ HOST_CAP_LED = (1 << 25), /* Supports activity LED */
HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+ HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */
HOST_CAP_SNTF = (1 << 29), /* SNotification register */
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
+ /* HOST_CAP2 bits */
+ HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */
+ HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */
+ HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */
+
/* registers for each SATA port */
PORT_LST_ADDR = 0x00, /* command list DMA addr */
PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
struct ahci_host_priv {
unsigned int flags; /* AHCI_HFLAG_* */
u32 cap; /* cap to use */
+ u32 cap2; /* cap2 to use */
u32 port_map; /* port map to use */
u32 saved_cap; /* saved initial cap */
+ u32 saved_cap2; /* saved initial cap2 */
u32 saved_port_map; /* saved initial port_map */
u32 em_loc; /* enclosure management location */
};
static ssize_t ahci_show_host_caps(struct device *dev,
struct device_attribute *attr, char *buf);
+static ssize_t ahci_show_host_cap2(struct device *dev,
+ struct device_attribute *attr, char *buf);
static ssize_t ahci_show_host_version(struct device *dev,
struct device_attribute *attr, char *buf);
static ssize_t ahci_show_port_cmd(struct device *dev,
struct device_attribute *attr, char *buf);
DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL);
+DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL);
DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL);
DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL);
&dev_attr_em_message_type,
&dev_attr_em_message,
&dev_attr_ahci_host_caps,
+ &dev_attr_ahci_host_cap2,
&dev_attr_ahci_host_version,
&dev_attr_ahci_port_cmd,
NULL
[board_ahci_sb600] =
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255),
+ AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
+ AHCI_HFLAG_32BIT_ONLY),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb700 }, /* ATI SB700/800 */
/* AMD */
- { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD SB900 */
+ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
/* AMD is using RAID class only for ahci controllers */
{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */
+ { PCI_VDEVICE(NVIDIA, 0x0580), board_ahci_yesncq }, /* Linux ID */
{ PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */
{ PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */
return sprintf(buf, "%x\n", hpriv->cap);
}
+static ssize_t ahci_show_host_cap2(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct ata_port *ap = ata_shost_to_port(shost);
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+
+ return sprintf(buf, "%x\n", hpriv->cap2);
+}
+
static ssize_t ahci_show_host_version(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct ahci_host_priv *hpriv)
{
void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
- u32 cap, port_map;
+ u32 cap, cap2, vers, port_map;
int i;
int mv;
hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
+ /* CAP2 register is only defined for AHCI 1.2 and later */
+ vers = readl(mmio + HOST_VERSION);
+ if ((vers >> 16) > 1 ||
+ ((vers >> 16) == 1 && (vers & 0xFFFF) >= 0x200))
+ hpriv->saved_cap2 = cap2 = readl(mmio + HOST_CAP2);
+ else
+ hpriv->saved_cap2 = cap2 = 0;
+
/* some chips have errata preventing 64bit use */
if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
dev_printk(KERN_INFO, &pdev->dev,
/* record values to use during operation */
hpriv->cap = cap;
+ hpriv->cap2 = cap2;
hpriv->port_map = port_map;
}
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
writel(hpriv->saved_cap, mmio + HOST_CAP);
+ if (hpriv->saved_cap2)
+ writel(hpriv->saved_cap2, mmio + HOST_CAP2);
writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
}
struct ahci_host_priv *hpriv = host->private_data;
struct pci_dev *pdev = to_pci_dev(host->dev);
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
- u32 vers, cap, impl, speed;
+ u32 vers, cap, cap2, impl, speed;
const char *speed_s;
u16 cc;
const char *scc_s;
vers = readl(mmio + HOST_VERSION);
cap = hpriv->cap;
+ cap2 = hpriv->cap2;
impl = hpriv->port_map;
speed = (cap >> 20) & 0xf;
"flags: "
"%s%s%s%s%s%s%s"
"%s%s%s%s%s%s%s"
- "%s\n"
+ "%s%s%s%s%s%s\n"
,
- cap & (1 << 31) ? "64bit " : "",
- cap & (1 << 30) ? "ncq " : "",
- cap & (1 << 29) ? "sntf " : "",
- cap & (1 << 28) ? "ilck " : "",
- cap & (1 << 27) ? "stag " : "",
- cap & (1 << 26) ? "pm " : "",
- cap & (1 << 25) ? "led " : "",
-
- cap & (1 << 24) ? "clo " : "",
- cap & (1 << 19) ? "nz " : "",
- cap & (1 << 18) ? "only " : "",
- cap & (1 << 17) ? "pmp " : "",
- cap & (1 << 15) ? "pio " : "",
- cap & (1 << 14) ? "slum " : "",
- cap & (1 << 13) ? "part " : "",
- cap & (1 << 6) ? "ems ": ""
+ cap & HOST_CAP_64 ? "64bit " : "",
+ cap & HOST_CAP_NCQ ? "ncq " : "",
+ cap & HOST_CAP_SNTF ? "sntf " : "",
+ cap & HOST_CAP_MPS ? "ilck " : "",
+ cap & HOST_CAP_SSS ? "stag " : "",
+ cap & HOST_CAP_ALPM ? "pm " : "",
+ cap & HOST_CAP_LED ? "led " : "",
+ cap & HOST_CAP_CLO ? "clo " : "",
+ cap & HOST_CAP_ONLY ? "only " : "",
+ cap & HOST_CAP_PMP ? "pmp " : "",
+ cap & HOST_CAP_FBS ? "fbs " : "",
+ cap & HOST_CAP_PIO_MULTI ? "pio " : "",
+ cap & HOST_CAP_SSC ? "slum " : "",
+ cap & HOST_CAP_PART ? "part " : "",
+ cap & HOST_CAP_CCC ? "ccc " : "",
+ cap & HOST_CAP_EMS ? "ems " : "",
+ cap & HOST_CAP_SXS ? "sxs " : "",
+ cap2 & HOST_CAP2_APST ? "apst " : "",
+ cap2 & HOST_CAP2_NVMHCI ? "nvmp " : "",
+ cap2 & HOST_CAP2_BOH ? "boh " : ""
);
}
}
}
-/*
- * SB600 ahci controller on certain boards can't do 64bit DMA with
- * older BIOS.
- */
-static bool ahci_sb600_32bit_only(struct pci_dev *pdev)
+/* only some SB600 ahci controllers can do 64bit DMA */
+static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
{
static const struct dmi_system_id sysids[] = {
/*
* The oldest version known to be broken is 0901 and
* working is 1501 which was released on 2007-10-26.
- * Force 32bit DMA on anything older than 1501.
+ * Enable 64bit DMA on 1501 and anything newer.
+ *
* Please read bko#9412 for more info.
*/
{
.driver_data = "20071026", /* yyyymmdd */
},
/*
- * It's yet unknown whether more recent BIOS fixes the
- * problem. Blacklist the whole board for the time
- * being. Please read the following thread for more
- * info.
+ * All BIOS versions for the MSI K9A2 Platinum (MS-7376)
+ * support 64bit DMA.
*
- * http://thread.gmane.org/gmane.linux.ide/42326
+ * BIOS versions earlier than 1.5 had the Manufacturer DMI
+ * fields as "MICRO-STAR INTERANTIONAL CO.,LTD".
+ * This spelling mistake was fixed in BIOS version 1.5, so
+ * 1.5 and later have the Manufacturer as
+ * "MICRO-STAR INTERNATIONAL CO.,LTD".
+ * So try to match on DMI_BOARD_VENDOR of "MICRO-STAR INTER".
+ *
+ * BIOS versions earlier than 1.9 had a Board Product Name
+ * DMI field of "MS-7376". This was changed to be
+ * "K9A2 Platinum (MS-7376)" in version 1.9, but we can still
+ * match on DMI_BOARD_NAME of "MS-7376".
*/
{
- .ident = "Gigabyte GA-MA69VM-S2",
+ .ident = "MSI K9A2 Platinum",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR,
- "Gigabyte Technology Co., Ltd."),
- DMI_MATCH(DMI_BOARD_NAME, "GA-MA69VM-S2"),
+ "MICRO-STAR INTER"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-7376"),
},
},
{ }
};
const struct dmi_system_id *match;
+ int year, month, date;
+ char buf[9];
match = dmi_first_match(sysids);
if (pdev->bus->number != 0 || pdev->devfn != PCI_DEVFN(0x12, 0) ||
!match)
return false;
- if (match->driver_data) {
- int year, month, date;
- char buf[9];
-
- dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
- snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
+ if (!match->driver_data)
+ goto enable_64bit;
- if (strcmp(buf, match->driver_data) >= 0)
- return false;
+ dmi_get_date(DMI_BIOS_DATE, &year, &month, &date);
+ snprintf(buf, sizeof(buf), "%04d%02d%02d", year, month, date);
+ if (strcmp(buf, match->driver_data) >= 0)
+ goto enable_64bit;
+ else {
dev_printk(KERN_WARNING, &pdev->dev, "%s: BIOS too old, "
"forcing 32bit DMA, update BIOS\n", match->ident);
- } else
- dev_printk(KERN_WARNING, &pdev->dev, "%s: this board can't "
- "do 64bit DMA, forcing 32bit\n", match->ident);
+ return false;
+ }
+enable_64bit:
+ dev_printk(KERN_WARNING, &pdev->dev, "%s: enabling 64bit DMA\n",
+ match->ident);
return true;
}
return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
}
+#ifdef CONFIG_ATA_ACPI
+static void ahci_gtf_filter_workaround(struct ata_host *host)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * Aspire 3810T issues a bunch of SATA enable commands
+ * via _GTF including an invalid one and one which is
+ * rejected by the device. Among the successful ones
+ * is FPDMA non-zero offset enable which when enabled
+ * only on the drive side leads to NCQ command
+ * failures. Filter it out.
+ */
+ {
+ .ident = "Aspire 3810T",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 3810T"),
+ },
+ .driver_data = (void *)ATA_ACPI_FILTER_FPDMA_OFFSET,
+ },
+ { }
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ unsigned int filter;
+ int i;
+
+ if (!dmi)
+ return;
+
+ filter = (unsigned long)dmi->driver_data;
+ dev_printk(KERN_INFO, host->dev,
+ "applying extra ACPI _GTF filter 0x%x for %s\n",
+ filter, dmi->ident);
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct ata_link *link;
+ struct ata_device *dev;
+
+ ata_for_each_link(link, ap, EDGE)
+ ata_for_each_dev(dev, link, ALL)
+ dev->gtf_filter |= filter;
+ }
+}
+#else
+static inline void ahci_gtf_filter_workaround(struct ata_host *host)
+{}
+#endif
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
- /* apply sb600 32bit only quirk */
- if (ahci_sb600_32bit_only(pdev))
- hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
+ /* only some SB600s can do 64bit DMA */
+ if (ahci_sb600_enable_64bit(pdev))
+ hpriv->flags &= ~AHCI_HFLAG_32BIT_ONLY;
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
pci_intx(pdev, 1);
/* apply workaround for ASUS P5W DH Deluxe mainboard */
ahci_p5wdh_workaround(host);
+ /* apply gtf filter quirk */
+ ahci_gtf_filter_workaround(host);
+
/* initialize adapter */
rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
if (rc)
#include <acpi/acpi_bus.h>
-enum {
- ATA_ACPI_FILTER_SETXFER = 1 << 0,
- ATA_ACPI_FILTER_LOCK = 1 << 1,
- ATA_ACPI_FILTER_DIPM = 1 << 2,
-
- ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
- ATA_ACPI_FILTER_LOCK |
- ATA_ACPI_FILTER_DIPM,
-};
-
-static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
+unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
#define NO_PORT_MULT 0xffff
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
tf->command = gtf->tf[6]; /* 0x1f7 */
}
-static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
+static int ata_acpi_filter_tf(struct ata_device *dev,
+ const struct ata_taskfile *tf,
const struct ata_taskfile *ptf)
{
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
+ if (dev->gtf_filter & ATA_ACPI_FILTER_SETXFER) {
/* libata doesn't use ACPI to configure transfer mode.
* It will only confuse device configuration. Skip.
*/
return 1;
}
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
+ if (dev->gtf_filter & ATA_ACPI_FILTER_LOCK) {
/* BIOS writers, sorry but we don't wanna lock
* features unless the user explicitly said so.
*/
return 1;
}
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_SATA_ENABLE) {
/* inhibit enabling DIPM */
- if (tf->command == ATA_CMD_SET_FEATURES &&
- tf->feature == SETFEATURES_SATA_ENABLE &&
+ if (dev->gtf_filter & ATA_ACPI_FILTER_DIPM &&
tf->nsect == SATA_DIPM)
return 1;
+
+ /* inhibit FPDMA non-zero offset */
+ if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+ (tf->nsect == SATA_FPDMA_OFFSET ||
+ tf->nsect == SATA_FPDMA_IN_ORDER))
+ return 1;
+
+ /* inhibit FPDMA auto activation */
+ if (dev->gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+ tf->nsect == SATA_FPDMA_AA)
+ return 1;
}
return 0;
pptf = &ptf;
}
- if (!ata_acpi_filter_tf(&tf, pptf)) {
+ if (!ata_acpi_filter_tf(dev, &tf, pptf)) {
rtf = tf;
err_mask = ata_exec_internal(dev, &rtf, NULL,
DMA_NONE, NULL, 0, 0);
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
+ struct ata_port *ap;
unsigned int tag;
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
+ ap = qc->ap;
qc->flags = 0;
tag = qc->tag;
void __ata_qc_complete(struct ata_queued_cmd *qc)
{
- struct ata_port *ap = qc->ap;
- struct ata_link *link = qc->dev->link;
+ struct ata_port *ap;
+ struct ata_link *link;
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
+ ap = qc->ap;
+ link = qc->dev->link;
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
qc->flags |= ATA_QCFLAG_FAILED;
if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
- if (!ata_tag_internal(qc->tag)) {
- /* always fill result TF for failed qc */
- fill_result_tf(qc);
+ /* always fill result TF for failed qc */
+ fill_result_tf(qc);
+
+ if (!ata_tag_internal(qc->tag))
ata_qc_schedule_eh(qc);
- return;
- }
+ else
+ __ata_qc_complete(qc);
+ return;
}
WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
dev->link = link;
dev->devno = dev - link->device;
+#ifdef CONFIG_ATA_ACPI
+ dev->gtf_filter = ata_acpi_gtf_filter;
+#endif
ata_dev_init(dev);
}
}
dev->pio_mode = XFER_PIO_0;
dev->flags &= ~ATA_DFLAG_SLEEPING;
- if (!ata_phys_link_offline(ata_dev_phys_link(dev))) {
- /* apply class override */
- if (lflags & ATA_LFLAG_ASSUME_ATA)
- classes[dev->devno] = ATA_DEV_ATA;
- else if (lflags & ATA_LFLAG_ASSUME_SEMB)
- classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
- } else
- classes[dev->devno] = ATA_DEV_NONE;
+ if (ata_phys_link_offline(ata_dev_phys_link(dev)))
+ continue;
+
+ /* apply class override */
+ if (lflags & ATA_LFLAG_ASSUME_ATA)
+ classes[dev->devno] = ATA_DEV_ATA;
+ else if (lflags & ATA_LFLAG_ASSUME_SEMB)
+ classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
}
/* record current link speed */
ap->pflags &= ~ATA_PFLAG_EH_PENDING;
spin_unlock_irqrestore(link->ap->lock, flags);
- /* Make sure onlineness and classification result correspond.
+ /*
+ * Make sure onlineness and classification result correspond.
* Hotplug could have happened during reset and some
* controllers fail to wait while a drive is spinning up after
* being hotplugged causing misdetection. By cross checking
- * link onlineness and classification result, those conditions
- * can be reliably detected and retried.
+ * link on/offlineness and classification result, those
+ * conditions can be reliably detected and retried.
*/
nr_unknown = 0;
ata_for_each_dev(dev, link, ALL) {
- /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
- if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
- classes[dev->devno] = ATA_DEV_NONE;
- if (ata_phys_link_online(ata_dev_phys_link(dev)))
+ if (ata_phys_link_online(ata_dev_phys_link(dev))) {
+ if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+ ata_dev_printk(dev, KERN_DEBUG, "link online "
+ "but device misclassifed\n");
+ classes[dev->devno] = ATA_DEV_NONE;
nr_unknown++;
+ }
+ } else if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
+ if (ata_class_enabled(classes[dev->devno]))
+ ata_dev_printk(dev, KERN_DEBUG, "link offline, "
+ "clearing class %d to NONE\n",
+ classes[dev->devno]);
+ classes[dev->devno] = ATA_DEV_NONE;
+ } else if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
+ ata_dev_printk(dev, KERN_DEBUG, "link status unknown, "
+ "clearing UNKNOWN to NONE\n");
+ classes[dev->devno] = ATA_DEV_NONE;
}
}
if (classify && nr_unknown) {
if (try < max_tries) {
ata_link_printk(link, KERN_WARNING, "link online but "
- "device misclassified, retrying\n");
+ "%d devices misclassified, retrying\n",
+ nr_unknown);
failed_link = link;
rc = -EAGAIN;
goto fail;
}
ata_link_printk(link, KERN_WARNING,
- "link online but device misclassified, "
- "device detection might fail\n");
+ "link online but %d devices misclassified, "
+ "device detection might fail\n", nr_unknown);
}
/* reset successful, schedule revalidation */
* device detection messages backwards.
*/
ata_for_each_dev(dev, link, ALL) {
- if (!(new_mask & (1 << dev->devno)) ||
- dev->class == ATA_DEV_PMP)
+ if (!(new_mask & (1 << dev->devno)))
continue;
dev->class = ehc->classes[dev->devno];
+ if (dev->class == ATA_DEV_PMP)
+ continue;
+
ehc->i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
ehc->i.flags &= ~ATA_EHI_PRINTINFO;
/* libata-acpi.c */
#ifdef CONFIG_ATA_ACPI
+extern unsigned int ata_acpi_gtf_filter;
+
extern void ata_acpi_associate_sata_port(struct ata_port *ap);
extern void ata_acpi_associate(struct ata_host *host);
extern void ata_acpi_dissociate(struct ata_host *host);
if (print_info && adev->class == ATA_DEV_ATAPI && !ali_atapi_dma) {
ata_dev_printk(adev, KERN_WARNING,
- "WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled\n");
+ "WARNING: ATAPI DMA disabled for reliability issues. It can be enabled\n");
ata_dev_printk(adev, KERN_WARNING,
"WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.\n");
}
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
{ },
};
int pci66mhz;
};
-static inline u8 atp867x_speed_to_mode(u8 speed)
-{
- return speed - XFER_UDMA_0 + 1;
-}
-
static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct atp867x_priv *dp = ap->private_data;
u8 speed = adev->dma_mode;
u8 b;
- u8 mode;
-
- mode = atp867x_speed_to_mode(speed);
+ u8 mode = speed - XFER_UDMA_0 + 1;
/*
* Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
iowrite8(b, dp->dma_mode);
}
-static int atp867x_get_active_clocks_shifted(unsigned int clk)
+static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
+ unsigned int clk)
{
+ struct atp867x_priv *dp = ap->private_data;
unsigned char clocks = clk;
+ /*
+ * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
+ * on 66MHz bus
+ */
+ if (dp->pci66mhz)
+ clocks++;
+
switch (clocks) {
case 0:
clocks = 1;
break;
- case 1 ... 7:
- break;
- case 8 ... 12:
- clocks = 7;
+ case 1 ... 6:
break;
default:
printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
- "Using default 8clk.\n", clk);
- clocks = 0; /* 8 clk */
+ "Using 12clk.\n", clk);
+ case 9 ... 12:
+ clocks = 7; /* 12 clk */
break;
+ case 7:
+ case 8: /* default 8 clk */
+ clocks = 0;
+ goto active_clock_shift_done;
}
+
+active_clock_shift_done:
return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
}
break;
case 1 ... 11:
break;
- case 12:
- clocks = 0;
- break;
- case 13: case 14:
- --clocks;
+ case 13:
+ case 14:
+ --clocks; /* by the spec */
break;
case 15:
break;
default:
printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
- "Using default 15clk.\n", clk);
- clocks = 0; /* 12 clk */
+ "Using default 12clk.\n", clk);
+ case 12: /* default 12 clk */
+ clocks = 0;
break;
}
+
return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
}
b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
iowrite8(b, dp->dma_mode);
- b = atp867x_get_active_clocks_shifted(t.active) |
- atp867x_get_recover_clocks_shifted(t.recover);
- if (dp->pci66mhz)
- b += 0x10;
+ b = atp867x_get_active_clocks_shifted(ap, t.active) |
+ atp867x_get_recover_clocks_shifted(t.recover);
if (adev->devno & 1)
iowrite8(b, dp->slave_piospd);
else
iowrite8(b, dp->mstr_piospd);
- /*
- * use the same value for comand timing as for PIO timimg
- */
+ b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
+ atp867x_get_recover_clocks_shifted(t.rec8b);
+
iowrite8(b, dp->eightb_piospd);
}
+static int atp867x_cable_override(struct pci_dev *pdev)
+{
+ if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
+ (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
+ pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
+ return 1;
+ }
+ return 0;
+}
+
static int atp867x_cable_detect(struct ata_port *ap)
{
- return ATA_CBL_PATA40_SHORT;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ if (atp867x_cable_override(pdev))
+ return ATA_CBL_PATA40_SHORT;
+
+ return ATA_CBL_PATA_UNK;
}
static struct scsi_host_template atp867x_sht = {
static const struct ata_port_info info_867x = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &atp867x_ops,
};
return rc;
}
+#ifdef CONFIG_PM
+static int atp867x_reinit_one(struct pci_dev *pdev)
+{
+ struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ int rc;
+
+ rc = ata_pci_device_do_resume(pdev);
+ if (rc)
+ return rc;
+
+ atp867x_fixup(host);
+
+ ata_host_resume(host);
+ return 0;
+}
+#endif
+
static struct pci_device_id atp867x_pci_tbl[] = {
{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A), 0 },
{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B), 0 },
.id_table = atp867x_pci_tbl,
.probe = atp867x_init_one,
.remove = ata_pci_remove_one,
+#ifdef CONFIG_PM
+ .suspend = ata_pci_device_suspend,
+ .resume = atp867x_reinit_one,
+#endif
};
static int __init atp867x_init(void)
.udma_mask = ATA_UDMA2,
.port_ops = &sc1200_port_ops
};
- /* Can't enable port 2 yet, see top comments */
- const struct ata_port_info *ppi[] = { &info, };
+ const struct ata_port_info *ppi[] = { &info, NULL };
return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
}
{ "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
{ "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
- { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
+ { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES },
{ "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
{ "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
*/
if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
return ATA_DEFER_PORT;
+
+ /* PIO commands need exclusive link: no other commands [DMA or PIO]
+ * can run concurrently.
+ * set excl_link when we want to send a PIO command in DMA mode
+ * or a non-NCQ command in NCQ mode.
+ * When we receive a command from that link, and there are no
+ * outstanding commands, mark a flag to clear excl_link and let
+ * the command go through.
+ */
+ if (unlikely(ap->excl_link)) {
+ if (link == ap->excl_link) {
+ if (ap->nr_active_links)
+ return ATA_DEFER_PORT;
+ qc->flags |= ATA_QCFLAG_CLEAR_EXCL;
+ return 0;
+ } else
+ return ATA_DEFER_PORT;
+ }
+
/*
* If the port is completely idle, then allow the new qc.
*/
* doesn't allow it.
*/
if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
- (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
- return 0;
+ (pp->pp_flags & MV_PP_FLAG_NCQ_EN)) {
+ if (ata_is_ncq(qc->tf.protocol))
+ return 0;
+ else {
+ ap->excl_link = link;
+ return ATA_DEFER_PORT;
+ }
+ }
return ATA_DEFER_PORT;
}
!ata_dev_enabled(link->device))
sata_link_hardreset(link, sata_deb_timing_hotplug, deadline,
NULL, NULL);
- else if (!(ehc->i.flags & ATA_EHI_QUIET))
- ata_link_printk(link, KERN_INFO,
- "nv: skipping hardreset on occupied port\n");
+ else {
+ const unsigned long *timing = sata_ehc_deb_timing(ehc);
+ int rc;
+
+ if (!(ehc->i.flags & ATA_EHI_QUIET))
+ ata_link_printk(link, KERN_INFO, "nv: skipping "
+ "hardreset on occupied port\n");
+
+ /* make sure the link is online */
+ rc = sata_link_resume(link, timing, deadline);
+ /* whine about phy resume failure but proceed */
+ if (rc && rc != -EOPNOTSUPP)
+ ata_link_printk(link, KERN_WARNING, "failed to resume "
+ "link (errno=%d)\n", rc);
+ }
/* device signature acquisition is unreliable */
return -EAGAIN;
{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
{ PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
{ PCI_VDEVICE(VIA, 0x9000), vt8251 },
- { PCI_VDEVICE(VIA, 0x9040), vt8251 },
{ } /* terminate list */
};
return;
}
-/********** Set socket options for a VC **********/
-
-// int amb_getsockopt (struct atm_vcc * atm_vcc, int level, int optname, void * optval, int optlen);
-
-/********** Set socket options for a VC **********/
-
-// int amb_setsockopt (struct atm_vcc * atm_vcc, int level, int optname, void * optval, int optlen);
-
/********** Send **********/
static int amb_send (struct atm_vcc * atm_vcc, struct sk_buff * skb) {
static int eni_setsockopt(struct atm_vcc *vcc,int level,int optname,
- void __user *optval,int optlen)
+ void __user *optval,unsigned int optlen)
{
return -EINVAL;
}
static int fs_setsockopt(struct atm_vcc *vcc,int level,int optname,
- void __user *optval,int optlen)
+ void __user *optval,unsigned int optlen)
{
func_enter ();
func_exit ();
static int
-fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, int optlen)
+fore200e_setsockopt(struct atm_vcc* vcc, int level, int optname, void __user *optval, unsigned int optlen)
{
/* struct fore200e* fore200e = FORE200E_DEV(vcc->dev); */
he_dev->rbps_base = pci_alloc_consistent(he_dev->pci_dev,
CONFIG_RBPS_SIZE * sizeof(struct he_rbp), &he_dev->rbps_phys);
if (he_dev->rbps_base == NULL) {
- hprintk("failed to alloc rbps\n");
- return -ENOMEM;
+ hprintk("failed to alloc rbps_base\n");
+ goto out_destroy_rbps_pool;
}
memset(he_dev->rbps_base, 0, CONFIG_RBPS_SIZE * sizeof(struct he_rbp));
he_dev->rbps_virt = kmalloc(CONFIG_RBPS_SIZE * sizeof(struct he_virt), GFP_KERNEL);
+ if (he_dev->rbps_virt == NULL) {
+ hprintk("failed to alloc rbps_virt\n");
+ goto out_free_rbps_base;
+ }
for (i = 0; i < CONFIG_RBPS_SIZE; ++i) {
dma_addr_t dma_handle;
cpuaddr = pci_pool_alloc(he_dev->rbps_pool, GFP_KERNEL|GFP_DMA, &dma_handle);
if (cpuaddr == NULL)
- return -ENOMEM;
+ goto out_free_rbps_virt;
he_dev->rbps_virt[i].virt = cpuaddr;
he_dev->rbps_base[i].status = RBP_LOANED | RBP_SMALLBUF | (i << RBP_INDEX_OFF);
CONFIG_RBPL_BUFSIZE, 8, 0);
if (he_dev->rbpl_pool == NULL) {
hprintk("unable to create rbpl pool\n");
- return -ENOMEM;
+ goto out_free_rbps_virt;
}
he_dev->rbpl_base = pci_alloc_consistent(he_dev->pci_dev,
CONFIG_RBPL_SIZE * sizeof(struct he_rbp), &he_dev->rbpl_phys);
if (he_dev->rbpl_base == NULL) {
- hprintk("failed to alloc rbpl\n");
- return -ENOMEM;
+ hprintk("failed to alloc rbpl_base\n");
+ goto out_destroy_rbpl_pool;
}
memset(he_dev->rbpl_base, 0, CONFIG_RBPL_SIZE * sizeof(struct he_rbp));
he_dev->rbpl_virt = kmalloc(CONFIG_RBPL_SIZE * sizeof(struct he_virt), GFP_KERNEL);
+ if (he_dev->rbpl_virt == NULL) {
+ hprintk("failed to alloc rbpl_virt\n");
+ goto out_free_rbpl_base;
+ }
for (i = 0; i < CONFIG_RBPL_SIZE; ++i) {
dma_addr_t dma_handle;
cpuaddr = pci_pool_alloc(he_dev->rbpl_pool, GFP_KERNEL|GFP_DMA, &dma_handle);
if (cpuaddr == NULL)
- return -ENOMEM;
+ goto out_free_rbpl_virt;
he_dev->rbpl_virt[i].virt = cpuaddr;
he_dev->rbpl_base[i].status = RBP_LOANED | (i << RBP_INDEX_OFF);
CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq), &he_dev->rbrq_phys);
if (he_dev->rbrq_base == NULL) {
hprintk("failed to allocate rbrq\n");
- return -ENOMEM;
+ goto out_free_rbpl_virt;
}
memset(he_dev->rbrq_base, 0, CONFIG_RBRQ_SIZE * sizeof(struct he_rbrq));
CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq), &he_dev->tbrq_phys);
if (he_dev->tbrq_base == NULL) {
hprintk("failed to allocate tbrq\n");
- return -ENOMEM;
+ goto out_free_rbpq_base;
}
memset(he_dev->tbrq_base, 0, CONFIG_TBRQ_SIZE * sizeof(struct he_tbrq));
he_writel(he_dev, CONFIG_TBRQ_THRESH, G0_TBRQ_THRESH + (group * 16));
return 0;
+
+out_free_rbpq_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBRQ_SIZE *
+ sizeof(struct he_rbrq), he_dev->rbrq_base,
+ he_dev->rbrq_phys);
+ i = CONFIG_RBPL_SIZE;
+out_free_rbpl_virt:
+ while (i--)
+ pci_pool_free(he_dev->rbpl_pool, he_dev->rbpl_virt[i].virt,
+ he_dev->rbpl_base[i].phys);
+ kfree(he_dev->rbpl_virt);
+
+out_free_rbpl_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBPL_SIZE *
+ sizeof(struct he_rbp), he_dev->rbpl_base,
+ he_dev->rbpl_phys);
+out_destroy_rbpl_pool:
+ pci_pool_destroy(he_dev->rbpl_pool);
+
+ i = CONFIG_RBPS_SIZE;
+out_free_rbps_virt:
+ while (i--)
+ pci_pool_free(he_dev->rbps_pool, he_dev->rbps_virt[i].virt,
+ he_dev->rbps_base[i].phys);
+ kfree(he_dev->rbps_virt);
+
+out_free_rbps_base:
+ pci_free_consistent(he_dev->pci_dev, CONFIG_RBPS_SIZE *
+ sizeof(struct he_rbp), he_dev->rbps_base,
+ he_dev->rbps_phys);
+out_destroy_rbps_pool:
+ pci_pool_destroy(he_dev->rbps_pool);
+ return -ENOMEM;
}
static int __devinit
}
static int hrz_setsockopt (struct atm_vcc * atm_vcc, int level, int optname,
- void *optval, int optlen) {
+ void *optval, unsigned int optlen) {
hrz_dev * dev = HRZ_DEV(atm_vcc->dev);
PRINTD (DBG_FLOW|DBG_VCC, "hrz_setsockopt");
switch (level) {
}
static int ia_setsockopt(struct atm_vcc *vcc, int level, int optname,
- void __user *optval, int optlen)
+ void __user *optval, unsigned int optlen)
{
IF_EVENT(printk(">ia_setsockopt\n");)
return -EINVAL;
SOLOS_ATTR_RO(RSUnCorrectedErrorsUp)
SOLOS_ATTR_RO(InterleaveRDn)
SOLOS_ATTR_RO(InterleaveRUp)
+SOLOS_ATTR_RO(BisRDn)
+SOLOS_ATTR_RO(BisRUp)
+SOLOS_ATTR_RO(INPdown)
+SOLOS_ATTR_RO(INPup)
SOLOS_ATTR_RO(ShowtimeStart)
SOLOS_ATTR_RO(ATURVendor)
SOLOS_ATTR_RO(ATUCCountry)
SOLOS_ATTR_RW(LineMode)
SOLOS_ATTR_RW(Profile)
SOLOS_ATTR_RW(DetectNoise)
+SOLOS_ATTR_RW(BisAForceSNRMarginDn)
+SOLOS_ATTR_RW(BisMForceSNRMarginDn)
+SOLOS_ATTR_RW(BisAMaxMargin)
+SOLOS_ATTR_RW(BisMMaxMargin)
+SOLOS_ATTR_RW(AnnexAForceSNRMarginDn)
+SOLOS_ATTR_RW(AnnexAMaxMargin)
+SOLOS_ATTR_RW(AnnexMMaxMargin)
SOLOS_ATTR_RO(SupportedAnnexes)
SOLOS_ATTR_RO(Status)
SOLOS_ATTR_RO(TotalStart)
#define RX_DMA_ADDR(port) (0x30 + (4 * (port)))
#define DATA_RAM_SIZE 32768
-#define BUF_SIZE 4096
+#define BUF_SIZE 2048
+#define OLD_BUF_SIZE 4096 /* For FPGA versions <= 2*/
#define FPGA_PAGE 528 /* FPGA flash page size*/
#define SOLOS_PAGE 512 /* Solos flash page size*/
#define FPGA_BLOCK (FPGA_PAGE * 8) /* FPGA flash block size*/
#define SOLOS_BLOCK (SOLOS_PAGE * 8) /* Solos flash block size*/
-#define RX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2)
-#define TX_BUF(card, nr) ((card->buffers) + (nr)*BUF_SIZE*2 + BUF_SIZE)
+#define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
+#define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
+#define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
#define RX_DMA_SIZE 2048
+#define FPGA_VERSION(a,b) (((a) << 8) + (b))
+#define LEGACY_BUFFERS 2
+#define DMA_SUPPORTED 4
+
static int reset = 0;
static int atmdebug = 0;
static int firmware_upgrade = 0;
static int fpga_upgrade = 0;
+static int db_firmware_upgrade = 0;
+static int db_fpga_upgrade = 0;
struct pkt_hdr {
__le16 size;
wait_queue_head_t param_wq;
wait_queue_head_t fw_wq;
int using_dma;
+ int fpga_version;
+ int buffer_size;
};
MODULE_PARM_DESC(atmdebug, "Print ATM data");
MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
+MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
+MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
module_param(reset, int, 0444);
module_param(atmdebug, int, 0644);
module_param(firmware_upgrade, int, 0444);
module_param(fpga_upgrade, int, 0444);
+module_param(db_firmware_upgrade, int, 0444);
+module_param(db_fpga_upgrade, int, 0444);
static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
struct atm_vcc *vcc);
if (chip == 0) {
fw_name = "solos-FPGA.bin";
blocksize = FPGA_BLOCK;
- } else {
+ }
+
+ if (chip == 1) {
fw_name = "solos-Firmware.bin";
blocksize = SOLOS_BLOCK;
}
+
+ if (chip == 2){
+ if (card->fpga_version > LEGACY_BUFFERS){
+ fw_name = "solos-db-FPGA.bin";
+ blocksize = FPGA_BLOCK;
+ } else {
+ dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+ return -EPERM;
+ }
+ }
+
+ if (chip == 3){
+ if (card->fpga_version > LEGACY_BUFFERS){
+ fw_name = "solos-Firmware.bin";
+ blocksize = SOLOS_BLOCK;
+ } else {
+ dev_info(&card->dev->dev, "FPGA version doesn't support daughter board upgrades\n");
+ return -EPERM;
+ }
+ }
if (request_firmware(&fw, fw_name, &card->dev->dev))
return -ENOENT;
data32 = ioread32(card->config_regs + FPGA_MODE);
/* Set mode to Chip Erase */
- dev_info(&card->dev->dev, "Set FPGA Flash mode to %s Chip Erase\n",
- chip?"Solos":"FPGA");
+ if(chip == 0 || chip == 2)
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
+ if(chip == 1 || chip == 3)
+ dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
iowrite32((chip * 2), card->config_regs + FLASH_MODE);
/* Copy block to buffer, swapping each 16 bits */
for(i = 0; i < blocksize; i += 4) {
uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
- iowrite32(word, RX_BUF(card, 3) + i);
+ if(card->fpga_version > LEGACY_BUFFERS)
+ iowrite32(word, FLASH_BUF + i);
+ else
+ iowrite32(word, RX_BUF(card, 3) + i);
}
/* Specify block number and then trigger flash write */
memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
size = le16_to_cpu(header->size);
+ if (size > (card->buffer_size - sizeof(*header))){
+ dev_warn(&card->dev->dev, "Invalid buffer size\n");
+ continue;
+ }
skb = alloc_skb(size + 1, GFP_ATOMIC);
if (!skb) {
fpga_ver = (data32 & 0x0000FFFF);
major_ver = ((data32 & 0xFF000000) >> 24);
minor_ver = ((data32 & 0x00FF0000) >> 16);
+ card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
+ if (card->fpga_version > LEGACY_BUFFERS)
+ card->buffer_size = BUF_SIZE;
+ else
+ card->buffer_size = OLD_BUF_SIZE;
dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
major_ver, minor_ver, fpga_ver);
- if (0 && fpga_ver > 27)
+ if (card->fpga_version >= DMA_SUPPORTED){
card->using_dma = 1;
- else {
+ } else {
+ card->using_dma = 0;
/* Set RX empty flag for all ports */
iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
}
if (firmware_upgrade)
flash_upgrade(card, 1);
+ if (db_fpga_upgrade)
+ flash_upgrade(card, 2);
+
+ if (db_firmware_upgrade)
+ flash_upgrade(card, 3);
+
err = atm_init(card);
if (err)
goto out_free_irq;
static int zatm_setsockopt(struct atm_vcc *vcc,int level,int optname,
- void __user *optval,int optlen)
+ void __user *optval,unsigned int optlen)
{
return -EINVAL;
}
printk(KERN_ERR "%s: driver_add_attrs(%s) failed\n",
__func__, drv->name);
}
- error = add_bind_files(drv);
- if (error) {
- /* Ditto */
- printk(KERN_ERR "%s: add_bind_files(%s) failed\n",
- __func__, drv->name);
+
+ if (!drv->suppress_bind_attrs) {
+ error = add_bind_files(drv);
+ if (error) {
+ /* Ditto */
+ printk(KERN_ERR "%s: add_bind_files(%s) failed\n",
+ __func__, drv->name);
+ }
}
kobject_uevent(&priv->kobj, KOBJ_ADD);
return 0;
+
out_unregister:
kfree(drv->p);
drv->p = NULL;
if (!drv->bus)
return;
- remove_bind_files(drv);
+ if (!drv->suppress_bind_attrs)
+ remove_bind_files(drv);
driver_remove_attrs(drv->bus, drv);
driver_remove_file(drv, &driver_attr_uevent);
klist_remove(&drv->p->knode_bus);
put_driver(other);
printk(KERN_ERR "Error: Driver '%s' is already registered, "
"aborting...\n", drv->name);
- return -EEXIST;
+ return -EBUSY;
}
ret = bus_add_driver(drv);
{
int retval, code;
+ /* make sure driver won't have bind/unbind attributes */
+ drv->driver.suppress_bind_attrs = true;
+
/* temporary section violation during probe() */
drv->probe = probe;
retval = code = platform_driver_register(drv);
- /* Fixup that section violation, being paranoid about code scanning
+ /*
+ * Fixup that section violation, being paranoid about code scanning
* the list of drivers in order to probe new devices. Check to see
* if the probe was successful, and make sure any forced probes of
* new devices fail.
INIT_LIST_HEAD(&list);
mutex_lock(&dpm_list_mtx);
+ transition_started = false;
while (!list_empty(&dpm_list)) {
struct device *dev = to_device(dpm_list.prev);
{
int retval = 0;
- dev_dbg(dev, "__pm_runtime_idle()!\n");
-
if (dev->power.runtime_error)
retval = -EINVAL;
else if (dev->power.idle_notification)
wake_up_all(&dev->power.wait_queue);
out:
- dev_dbg(dev, "__pm_runtime_idle() returns %d!\n", retval);
-
return retval;
}
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
return true;
}
-
-/*
- DAC960_ProcReadStatus implements reading /proc/rd/status.
-*/
-
-static int DAC960_ProcReadStatus(char *Page, char **Start, off_t Offset,
- int Count, int *EOF, void *Data)
+static int dac960_proc_show(struct seq_file *m, void *v)
{
unsigned char *StatusMessage = "OK\n";
- int ControllerNumber, BytesAvailable;
+ int ControllerNumber;
for (ControllerNumber = 0;
ControllerNumber < DAC960_ControllerCount;
ControllerNumber++)
break;
}
}
- BytesAvailable = strlen(StatusMessage) - Offset;
- if (Count >= BytesAvailable)
- {
- Count = BytesAvailable;
- *EOF = true;
- }
- if (Count <= 0) return 0;
- *Start = Page;
- memcpy(Page, &StatusMessage[Offset], Count);
- return Count;
+ seq_puts(m, StatusMessage);
+ return 0;
}
+static int dac960_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dac960_proc_show, NULL);
+}
-/*
- DAC960_ProcReadInitialStatus implements reading /proc/rd/cN/initial_status.
-*/
+static const struct file_operations dac960_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = dac960_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
-static int DAC960_ProcReadInitialStatus(char *Page, char **Start, off_t Offset,
- int Count, int *EOF, void *Data)
+static int dac960_initial_status_proc_show(struct seq_file *m, void *v)
{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
- int BytesAvailable = Controller->InitialStatusLength - Offset;
- if (Count >= BytesAvailable)
- {
- Count = BytesAvailable;
- *EOF = true;
- }
- if (Count <= 0) return 0;
- *Start = Page;
- memcpy(Page, &Controller->CombinedStatusBuffer[Offset], Count);
- return Count;
+ DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
+ seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
+ return 0;
}
+static int dac960_initial_status_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dac960_initial_status_proc_show, PDE(inode)->data);
+}
-/*
- DAC960_ProcReadCurrentStatus implements reading /proc/rd/cN/current_status.
-*/
+static const struct file_operations dac960_initial_status_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = dac960_initial_status_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
-static int DAC960_ProcReadCurrentStatus(char *Page, char **Start, off_t Offset,
- int Count, int *EOF, void *Data)
+static int dac960_current_status_proc_show(struct seq_file *m, void *v)
{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
+ DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
unsigned char *StatusMessage =
"No Rebuild or Consistency Check in Progress\n";
int ProgressMessageLength = strlen(StatusMessage);
- int BytesAvailable;
if (jiffies != Controller->LastCurrentStatusTime)
{
Controller->CurrentStatusLength = 0;
}
Controller->LastCurrentStatusTime = jiffies;
}
- BytesAvailable = Controller->CurrentStatusLength - Offset;
- if (Count >= BytesAvailable)
- {
- Count = BytesAvailable;
- *EOF = true;
- }
- if (Count <= 0) return 0;
- *Start = Page;
- memcpy(Page, &Controller->CurrentStatusBuffer[Offset], Count);
- return Count;
+ seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
+ return 0;
}
+static int dac960_current_status_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dac960_current_status_proc_show, PDE(inode)->data);
+}
-/*
- DAC960_ProcReadUserCommand implements reading /proc/rd/cN/user_command.
-*/
+static const struct file_operations dac960_current_status_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = dac960_current_status_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
-static int DAC960_ProcReadUserCommand(char *Page, char **Start, off_t Offset,
- int Count, int *EOF, void *Data)
+static int dac960_user_command_proc_show(struct seq_file *m, void *v)
{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
- int BytesAvailable = Controller->UserStatusLength - Offset;
- if (Count >= BytesAvailable)
- {
- Count = BytesAvailable;
- *EOF = true;
- }
- if (Count <= 0) return 0;
- *Start = Page;
- memcpy(Page, &Controller->UserStatusBuffer[Offset], Count);
- return Count;
-}
+ DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
+ seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
+ return 0;
+}
-/*
- DAC960_ProcWriteUserCommand implements writing /proc/rd/cN/user_command.
-*/
+static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, dac960_user_command_proc_show, PDE(inode)->data);
+}
-static int DAC960_ProcWriteUserCommand(struct file *file,
+static ssize_t dac960_user_command_proc_write(struct file *file,
const char __user *Buffer,
- unsigned long Count, void *Data)
+ size_t Count, loff_t *pos)
{
- DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
+ DAC960_Controller_T *Controller = (DAC960_Controller_T *) PDE(file->f_path.dentry->d_inode)->data;
unsigned char CommandBuffer[80];
int Length;
if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
? Count : -EBUSY);
}
+static const struct file_operations dac960_user_command_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = dac960_user_command_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = dac960_user_command_proc_write,
+};
/*
DAC960_CreateProcEntries creates the /proc/rd/... entries for the
if (DAC960_ProcDirectoryEntry == NULL) {
DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
- StatusProcEntry = create_proc_read_entry("status", 0,
+ StatusProcEntry = proc_create("status", 0,
DAC960_ProcDirectoryEntry,
- DAC960_ProcReadStatus, NULL);
+ &dac960_proc_fops);
}
sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
ControllerProcEntry = proc_mkdir(Controller->ControllerName,
DAC960_ProcDirectoryEntry);
- create_proc_read_entry("initial_status", 0, ControllerProcEntry,
- DAC960_ProcReadInitialStatus, Controller);
- create_proc_read_entry("current_status", 0, ControllerProcEntry,
- DAC960_ProcReadCurrentStatus, Controller);
- UserCommandProcEntry =
- create_proc_read_entry("user_command", S_IWUSR | S_IRUSR,
- ControllerProcEntry, DAC960_ProcReadUserCommand,
- Controller);
- UserCommandProcEntry->write_proc = DAC960_ProcWriteUserCommand;
+ proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
+ proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
+ UserCommandProcEntry = proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
Controller->ControllerProcEntry = ControllerProcEntry;
}
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/init.h>
+#include <linux/jiffies.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
#include <linux/compat.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/io.h>
MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
+static int cciss_allow_hpsa;
+module_param(cciss_allow_hpsa, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(cciss_allow_hpsa,
+ "Prevent cciss driver from accessing hardware known to be "
+ " supported by the hpsa driver");
+
#include "cciss_cmd.h"
#include "cciss.h"
#include <linux/cciss_ioctl.h>
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324A},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x324B},
- {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
{0x409D0E11, "Smart Array 6400 EM", &SA5_access},
{0x40910E11, "Smart Array 6i", &SA5_access},
{0x3225103C, "Smart Array P600", &SA5_access},
- {0x3223103C, "Smart Array P800", &SA5_access},
- {0x3234103C, "Smart Array P400", &SA5_access},
{0x3235103C, "Smart Array P400i", &SA5_access},
{0x3211103C, "Smart Array E200i", &SA5_access},
{0x3212103C, "Smart Array E200", &SA5_access},
{0x3214103C, "Smart Array E200i", &SA5_access},
{0x3215103C, "Smart Array E200i", &SA5_access},
{0x3237103C, "Smart Array E500", &SA5_access},
+/* controllers below this line are also supported by the hpsa driver. */
+#define HPSA_BOUNDARY 0x3223103C
+ {0x3223103C, "Smart Array P800", &SA5_access},
+ {0x3234103C, "Smart Array P400", &SA5_access},
{0x323D103C, "Smart Array P700m", &SA5_access},
{0x3241103C, "Smart Array P212", &SA5_access},
{0x3243103C, "Smart Array P410", &SA5_access},
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324A103C, "Smart Array P712m", &SA5_access},
{0x324B103C, "Smart Array P711m", &SA5_access},
- {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
/* How long to wait (in milliseconds) for board to go into simple mode */
static ctlr_info_t *hba[MAX_CTLR];
+static struct task_struct *cciss_scan_thread;
+static DEFINE_MUTEX(scan_mutex);
+static LIST_HEAD(scan_q);
+
static void do_cciss_request(struct request_queue *q);
static irqreturn_t do_cciss_intr(int irq, void *dev_id);
static int cciss_open(struct block_device *bdev, fmode_t mode);
static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, int first_time);
+static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
static int deregister_disk(ctlr_info_t *h, int drv_index,
- int clear_all);
+ int clear_all, int via_ioctl);
static void cciss_read_capacity(int ctlr, int logvol, int withirq,
sector_t *total_size, unsigned int *block_size);
static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
static void fail_all_cmds(unsigned long ctlr);
+static int add_to_scan_list(struct ctlr_info *h);
static int scan_thread(void *data);
static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
+static void cciss_hba_release(struct device *dev);
+static void cciss_device_release(struct device *dev);
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
+static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
#ifdef CONFIG_PROC_FS
static void cciss_procinit(int i);
#include "cciss_scsi.c" /* For SCSI tape support */
-#define RAID_UNKNOWN 6
+static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
+ "UNKNOWN"
+};
+#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
#ifdef CONFIG_PROC_FS
#define ENG_GIG 1000000000
#define ENG_GIG_FACTOR (ENG_GIG/512)
#define ENGAGE_SCSI "engage scsi"
-static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
- "UNKNOWN"
-};
static struct proc_dir_entry *proc_cciss;
ctlr_info_t *h = seq->private;
unsigned ctlr = h->ctlr;
loff_t *pos = v;
- drive_info_struct *drv = &h->drv[*pos];
+ drive_info_struct *drv = h->drv[*pos];
if (*pos > h->highest_lun)
return 0;
vol_sz_frac *= 100;
sector_div(vol_sz_frac, ENG_GIG_FACTOR);
- if (drv->raid_level > 5)
+ if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN)
drv->raid_level = RAID_UNKNOWN;
seq_printf(seq, "cciss/c%dd%d:"
"\t%4u.%02uGB\tRAID %s\n",
return err;
}
-static struct file_operations cciss_proc_fops = {
+static const struct file_operations cciss_proc_fops = {
.owner = THIS_MODULE,
.open = cciss_seq_open,
.read = seq_read,
#define to_hba(n) container_of(n, struct ctlr_info, dev)
#define to_drv(n) container_of(n, drive_info_struct, dev)
-static struct device_type cciss_host_type = {
- .name = "cciss_host",
-};
+static ssize_t host_store_rescan(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ctlr_info *h = to_hba(dev);
+
+ add_to_scan_list(h);
+ wake_up_process(cciss_scan_thread);
+ wait_for_completion_interruptible(&h->scan_wait);
+
+ return count;
+}
+DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
static ssize_t dev_show_unique_id(struct device *dev,
struct device_attribute *attr,
}
DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
+static ssize_t cciss_show_lunid(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ unsigned long flags;
+ unsigned char lunid[8];
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring) {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -EBUSY;
+ }
+ if (!drv->heads) {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -ENOTTY;
+ }
+ memcpy(lunid, drv->LunID, sizeof(lunid));
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ lunid[0], lunid[1], lunid[2], lunid[3],
+ lunid[4], lunid[5], lunid[6], lunid[7]);
+}
+DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
+
+static ssize_t cciss_show_raid_level(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ int raid;
+ unsigned long flags;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring) {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -EBUSY;
+ }
+ raid = drv->raid_level;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ if (raid < 0 || raid > RAID_UNKNOWN)
+ raid = RAID_UNKNOWN;
+
+ return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n",
+ raid_label[raid]);
+}
+DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
+
+static ssize_t cciss_show_usage_count(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ drive_info_struct *drv = to_drv(dev);
+ struct ctlr_info *h = to_hba(drv->dev.parent);
+ unsigned long flags;
+ int count;
+
+ spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+ if (h->busy_configuring) {
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return -EBUSY;
+ }
+ count = drv->usage_count;
+ spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+ return snprintf(buf, 20, "%d\n", count);
+}
+DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
+
+static struct attribute *cciss_host_attrs[] = {
+ &dev_attr_rescan.attr,
+ NULL
+};
+
+static struct attribute_group cciss_host_attr_group = {
+ .attrs = cciss_host_attrs,
+};
+
+static const struct attribute_group *cciss_host_attr_groups[] = {
+ &cciss_host_attr_group,
+ NULL
+};
+
+static struct device_type cciss_host_type = {
+ .name = "cciss_host",
+ .groups = cciss_host_attr_groups,
+ .release = cciss_hba_release,
+};
+
static struct attribute *cciss_dev_attrs[] = {
&dev_attr_unique_id.attr,
&dev_attr_model.attr,
&dev_attr_vendor.attr,
&dev_attr_rev.attr,
+ &dev_attr_lunid.attr,
+ &dev_attr_raid_level.attr,
+ &dev_attr_usage_count.attr,
NULL
};
static struct device_type cciss_dev_type = {
.name = "cciss_device",
.groups = cciss_dev_attr_groups,
+ .release = cciss_device_release,
};
static struct bus_type cciss_bus_type = {
.name = "cciss",
};
+/*
+ * cciss_hba_release is called when the reference count
+ * of h->dev goes to zero.
+ */
+static void cciss_hba_release(struct device *dev)
+{
+ /*
+ * nothing to do, but need this to avoid a warning
+ * about not having a release handler from lib/kref.c.
+ */
+}
/*
* Initialize sysfs entry for each controller. This sets up and registers
static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
{
device_del(&h->dev);
+ put_device(&h->dev); /* final put. */
+}
+
+/* cciss_device_release is called when the reference count
+ * of h->drv[x]dev goes to zero.
+ */
+static void cciss_device_release(struct device *dev)
+{
+ drive_info_struct *drv = to_drv(dev);
+ kfree(drv);
}
/*
* /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
* /sys/block/cciss!c#d# to this entry.
*/
-static int cciss_create_ld_sysfs_entry(struct ctlr_info *h,
- drive_info_struct *drv,
+static long cciss_create_ld_sysfs_entry(struct ctlr_info *h,
int drv_index)
{
- device_initialize(&drv->dev);
- drv->dev.type = &cciss_dev_type;
- drv->dev.bus = &cciss_bus_type;
- dev_set_name(&drv->dev, "c%dd%d", h->ctlr, drv_index);
- drv->dev.parent = &h->dev;
- return device_add(&drv->dev);
+ struct device *dev;
+
+ if (h->drv[drv_index]->device_initialized)
+ return 0;
+
+ dev = &h->drv[drv_index]->dev;
+ device_initialize(dev);
+ dev->type = &cciss_dev_type;
+ dev->bus = &cciss_bus_type;
+ dev_set_name(dev, "c%dd%d", h->ctlr, drv_index);
+ dev->parent = &h->dev;
+ h->drv[drv_index]->device_initialized = 1;
+ return device_add(dev);
}
/*
* Remove sysfs entries for a logical drive.
*/
-static void cciss_destroy_ld_sysfs_entry(drive_info_struct *drv)
+static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index,
+ int ctlr_exiting)
{
- device_del(&drv->dev);
+ struct device *dev = &h->drv[drv_index]->dev;
+
+ /* special case for c*d0, we only destroy it on controller exit */
+ if (drv_index == 0 && !ctlr_exiting)
+ return;
+
+ device_del(dev);
+ put_device(dev); /* the "final" put. */
+ h->drv[drv_index] = NULL;
}
/*
printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
#endif /* CCISS_DEBUG */
- if (host->busy_initializing || drv->busy_configuring)
+ if (drv->busy_configuring)
return -EBUSY;
/*
* Root is allowed to open raw volume zero even if it's not configured
if (MINOR(bdev->bd_dev) & 0x0f) {
return -ENXIO;
/* if it is, make sure we have a LUN ID */
- } else if (drv->LunID == 0) {
+ } else if (memcmp(drv->LunID, CTLR_LUNID,
+ sizeof(drv->LunID))) {
return -ENXIO;
}
}
case CCISS_DEREGDISK:
case CCISS_REGNEWD:
case CCISS_REVALIDVOLS:
- return rebuild_lun_table(host, 0);
+ return rebuild_lun_table(host, 0, 1);
case CCISS_GETLUNINFO:{
LogvolInfo_struct luninfo;
- luninfo.LunID = drv->LunID;
+ memcpy(&luninfo.LunID, drv->LunID,
+ sizeof(luninfo.LunID));
luninfo.num_opens = drv->usage_count;
luninfo.num_parts = 0;
if (copy_to_user(argp, &luninfo,
/* make sure the disk has been added and the drive is real
* because this can be called from the middle of init_one.
*/
- if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
+ if (!h->drv[curr_queue])
+ continue;
+ if (!(h->drv[curr_queue]->queue) ||
+ !(h->drv[curr_queue]->heads))
continue;
blk_start_queue(h->gendisk[curr_queue]->queue);
spin_unlock_irqrestore(&h->lock, flags);
}
-static void log_unit_to_scsi3addr(ctlr_info_t *h, unsigned char scsi3addr[],
- uint32_t log_unit)
+static inline void log_unit_to_scsi3addr(ctlr_info_t *h,
+ unsigned char scsi3addr[], uint32_t log_unit)
{
- log_unit = h->drv[log_unit].LunID & 0x03fff;
- memset(&scsi3addr[4], 0, 4);
- memcpy(&scsi3addr[0], &log_unit, 4);
- scsi3addr[3] |= 0x40;
+ memcpy(scsi3addr, h->drv[log_unit]->LunID,
+ sizeof(h->drv[log_unit]->LunID));
}
/* This function gets the SCSI vendor, model, and revision of a logical drive
return;
}
-static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
+/*
+ * cciss_add_disk sets up the block device queue for a logical drive
+ */
+static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
int drv_index)
{
disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+ if (!disk->queue)
+ goto init_queue_failure;
sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
disk->major = h->major;
disk->first_minor = drv_index << NWD_SHIFT;
disk->fops = &cciss_fops;
- disk->private_data = &h->drv[drv_index];
- disk->driverfs_dev = &h->drv[drv_index].dev;
+ if (cciss_create_ld_sysfs_entry(h, drv_index))
+ goto cleanup_queue;
+ disk->private_data = h->drv[drv_index];
+ disk->driverfs_dev = &h->drv[drv_index]->dev;
/* Set up queue information */
blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
disk->queue->queuedata = h;
blk_queue_logical_block_size(disk->queue,
- h->drv[drv_index].block_size);
+ h->drv[drv_index]->block_size);
/* Make sure all queue data is written out before */
- /* setting h->drv[drv_index].queue, as setting this */
+ /* setting h->drv[drv_index]->queue, as setting this */
/* allows the interrupt handler to start the queue */
wmb();
- h->drv[drv_index].queue = disk->queue;
+ h->drv[drv_index]->queue = disk->queue;
add_disk(disk);
+ return 0;
+
+cleanup_queue:
+ blk_cleanup_queue(disk->queue);
+ disk->queue = NULL;
+init_queue_failure:
+ return -1;
}
/* This function will check the usage_count of the drive to be updated/added.
* is also the controller node. Any changes to disk 0 will show up on
* the next reboot.
*/
-static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
+ int via_ioctl)
{
ctlr_info_t *h = hba[ctlr];
struct gendisk *disk;
unsigned long flags = 0;
int ret = 0;
drive_info_struct *drvinfo;
- int was_only_controller_node;
/* Get information about the disk and modify the driver structure */
inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
- drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+ drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL);
if (inq_buff == NULL || drvinfo == NULL)
goto mem_msg;
- /* See if we're trying to update the "controller node"
- * this will happen the when the first logical drive gets
- * created by ACU.
- */
- was_only_controller_node = (drv_index == 0 &&
- h->drv[0].raid_level == -1);
-
/* testing to see if 16-byte CDBs are already being used */
if (h->cciss_read == CCISS_READ_16) {
cciss_read_capacity_16(h->ctlr, drv_index, 1,
drvinfo->model, drvinfo->rev);
cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
sizeof(drvinfo->serial_no));
+ /* Save the lunid in case we deregister the disk, below. */
+ memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
+ sizeof(drvinfo->LunID));
/* Is it the same disk we already know, and nothing's changed? */
- if (h->drv[drv_index].raid_level != -1 &&
+ if (h->drv[drv_index]->raid_level != -1 &&
((memcmp(drvinfo->serial_no,
- h->drv[drv_index].serial_no, 16) == 0) &&
- drvinfo->block_size == h->drv[drv_index].block_size &&
- drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
- drvinfo->heads == h->drv[drv_index].heads &&
- drvinfo->sectors == h->drv[drv_index].sectors &&
- drvinfo->cylinders == h->drv[drv_index].cylinders))
+ h->drv[drv_index]->serial_no, 16) == 0) &&
+ drvinfo->block_size == h->drv[drv_index]->block_size &&
+ drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks &&
+ drvinfo->heads == h->drv[drv_index]->heads &&
+ drvinfo->sectors == h->drv[drv_index]->sectors &&
+ drvinfo->cylinders == h->drv[drv_index]->cylinders))
/* The disk is unchanged, nothing to update */
goto freeret;
* If the disk already exists then deregister it before proceeding
* (unless it's the first disk (for the controller node).
*/
- if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+ if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
printk(KERN_WARNING "disk %d has changed.\n", drv_index);
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- h->drv[drv_index].busy_configuring = 1;
+ h->drv[drv_index]->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- /* deregister_disk sets h->drv[drv_index].queue = NULL
+ /* deregister_disk sets h->drv[drv_index]->queue = NULL
* which keeps the interrupt handler from starting
* the queue.
*/
- ret = deregister_disk(h, drv_index, 0);
- h->drv[drv_index].busy_configuring = 0;
+ ret = deregister_disk(h, drv_index, 0, via_ioctl);
}
/* If the disk is in use return */
goto freeret;
/* Save the new information from cciss_geometry_inquiry
- * and serial number inquiry.
+ * and serial number inquiry. If the disk was deregistered
+ * above, then h->drv[drv_index] will be NULL.
*/
- h->drv[drv_index].block_size = drvinfo->block_size;
- h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
- h->drv[drv_index].heads = drvinfo->heads;
- h->drv[drv_index].sectors = drvinfo->sectors;
- h->drv[drv_index].cylinders = drvinfo->cylinders;
- h->drv[drv_index].raid_level = drvinfo->raid_level;
- memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
- memcpy(h->drv[drv_index].vendor, drvinfo->vendor, VENDOR_LEN + 1);
- memcpy(h->drv[drv_index].model, drvinfo->model, MODEL_LEN + 1);
- memcpy(h->drv[drv_index].rev, drvinfo->rev, REV_LEN + 1);
+ if (h->drv[drv_index] == NULL) {
+ drvinfo->device_initialized = 0;
+ h->drv[drv_index] = drvinfo;
+ drvinfo = NULL; /* so it won't be freed below. */
+ } else {
+ /* special case for cxd0 */
+ h->drv[drv_index]->block_size = drvinfo->block_size;
+ h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks;
+ h->drv[drv_index]->heads = drvinfo->heads;
+ h->drv[drv_index]->sectors = drvinfo->sectors;
+ h->drv[drv_index]->cylinders = drvinfo->cylinders;
+ h->drv[drv_index]->raid_level = drvinfo->raid_level;
+ memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16);
+ memcpy(h->drv[drv_index]->vendor, drvinfo->vendor,
+ VENDOR_LEN + 1);
+ memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1);
+ memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1);
+ }
++h->num_luns;
disk = h->gendisk[drv_index];
- set_capacity(disk, h->drv[drv_index].nr_blocks);
+ set_capacity(disk, h->drv[drv_index]->nr_blocks);
/* If it's not disk 0 (drv_index != 0)
* or if it was disk 0, but there was previously
* (raid_leve == -1) then we want to update the
* logical drive's information.
*/
- if (drv_index || first_time)
- cciss_add_disk(h, disk, drv_index);
+ if (drv_index || first_time) {
+ if (cciss_add_disk(h, disk, drv_index) != 0) {
+ cciss_free_gendisk(h, drv_index);
+ cciss_free_drive_info(h, drv_index);
+ printk(KERN_WARNING "cciss:%d could not update "
+ "disk %d\n", h->ctlr, drv_index);
+ --h->num_luns;
+ }
+ }
freeret:
kfree(inq_buff);
}
/* This function will find the first index of the controllers drive array
- * that has a -1 for the raid_level and will return that index. This is
- * where new drives will be added. If the index to be returned is greater
- * than the highest_lun index for the controller then highest_lun is set
- * to this new index. If there are no available indexes then -1 is returned.
- * "controller_node" is used to know if this is a real logical drive, or just
- * the controller node, which determines if this counts towards highest_lun.
+ * that has a null drv pointer and allocate the drive info struct and
+ * will return that index This is where new drives will be added.
+ * If the index to be returned is greater than the highest_lun index for
+ * the controller then highest_lun is set * to this new index.
+ * If there are no available indexes or if tha allocation fails, then -1
+ * is returned. * "controller_node" is used to know if this is a real
+ * logical drive, or just the controller node, which determines if this
+ * counts towards highest_lun.
*/
-static int cciss_find_free_drive_index(int ctlr, int controller_node)
+static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node)
{
int i;
+ drive_info_struct *drv;
+ /* Search for an empty slot for our drive info */
for (i = 0; i < CISS_MAX_LUN; i++) {
- if (hba[ctlr]->drv[i].raid_level == -1) {
- if (i > hba[ctlr]->highest_lun)
- if (!controller_node)
- hba[ctlr]->highest_lun = i;
+
+ /* if not cxd0 case, and it's occupied, skip it. */
+ if (h->drv[i] && i != 0)
+ continue;
+ /*
+ * If it's cxd0 case, and drv is alloc'ed already, and a
+ * disk is configured there, skip it.
+ */
+ if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1)
+ continue;
+
+ /*
+ * We've found an empty slot. Update highest_lun
+ * provided this isn't just the fake cxd0 controller node.
+ */
+ if (i > h->highest_lun && !controller_node)
+ h->highest_lun = i;
+
+ /* If adding a real disk at cxd0, and it's already alloc'ed */
+ if (i == 0 && h->drv[i] != NULL)
return i;
- }
+
+ /*
+ * Found an empty slot, not already alloc'ed. Allocate it.
+ * Mark it with raid_level == -1, so we know it's new later on.
+ */
+ drv = kzalloc(sizeof(*drv), GFP_KERNEL);
+ if (!drv)
+ return -1;
+ drv->raid_level = -1; /* so we know it's new */
+ h->drv[i] = drv;
+ return i;
}
return -1;
}
+static void cciss_free_drive_info(ctlr_info_t *h, int drv_index)
+{
+ kfree(h->drv[drv_index]);
+ h->drv[drv_index] = NULL;
+}
+
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index)
+{
+ put_disk(h->gendisk[drv_index]);
+ h->gendisk[drv_index] = NULL;
+}
+
/* cciss_add_gendisk finds a free hba[]->drv structure
* and allocates a gendisk if needed, and sets the lunid
* in the drvinfo structure. It returns the index into
* a means to talk to the controller in case no logical
* drives have yet been configured.
*/
-static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
+static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[],
+ int controller_node)
{
int drv_index;
- drv_index = cciss_find_free_drive_index(h->ctlr, controller_node);
+ drv_index = cciss_alloc_drive_info(h, controller_node);
if (drv_index == -1)
return -1;
+
/*Check if the gendisk needs to be allocated */
if (!h->gendisk[drv_index]) {
h->gendisk[drv_index] =
printk(KERN_ERR "cciss%d: could not "
"allocate a new disk %d\n",
h->ctlr, drv_index);
- return -1;
+ goto err_free_drive_info;
}
}
- h->drv[drv_index].LunID = lunid;
- if (cciss_create_ld_sysfs_entry(h, &h->drv[drv_index], drv_index))
+ memcpy(h->drv[drv_index]->LunID, lunid,
+ sizeof(h->drv[drv_index]->LunID));
+ if (cciss_create_ld_sysfs_entry(h, drv_index))
goto err_free_disk;
-
/* Don't need to mark this busy because nobody */
/* else knows about this disk yet to contend */
/* for access to it. */
- h->drv[drv_index].busy_configuring = 0;
+ h->drv[drv_index]->busy_configuring = 0;
wmb();
return drv_index;
err_free_disk:
- put_disk(h->gendisk[drv_index]);
- h->gendisk[drv_index] = NULL;
+ cciss_free_gendisk(h, drv_index);
+err_free_drive_info:
+ cciss_free_drive_info(h, drv_index);
return -1;
}
if (h->gendisk[0] != NULL) /* already did this? Then bail. */
return;
- drv_index = cciss_add_gendisk(h, 0, 1);
- if (drv_index == -1) {
- printk(KERN_WARNING "cciss%d: could not "
- "add disk 0.\n", h->ctlr);
- return;
- }
- h->drv[drv_index].block_size = 512;
- h->drv[drv_index].nr_blocks = 0;
- h->drv[drv_index].heads = 0;
- h->drv[drv_index].sectors = 0;
- h->drv[drv_index].cylinders = 0;
- h->drv[drv_index].raid_level = -1;
- memset(h->drv[drv_index].serial_no, 0, 16);
+ drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1);
+ if (drv_index == -1)
+ goto error;
+ h->drv[drv_index]->block_size = 512;
+ h->drv[drv_index]->nr_blocks = 0;
+ h->drv[drv_index]->heads = 0;
+ h->drv[drv_index]->sectors = 0;
+ h->drv[drv_index]->cylinders = 0;
+ h->drv[drv_index]->raid_level = -1;
+ memset(h->drv[drv_index]->serial_no, 0, 16);
disk = h->gendisk[drv_index];
- cciss_add_disk(h, disk, drv_index);
+ if (cciss_add_disk(h, disk, drv_index) == 0)
+ return;
+ cciss_free_gendisk(h, drv_index);
+ cciss_free_drive_info(h, drv_index);
+error:
+ printk(KERN_WARNING "cciss%d: could not "
+ "add disk 0.\n", h->ctlr);
+ return;
}
/* This function will add and remove logical drives from the Logical
* INPUT
* h = The controller to perform the operations on
*/
-static int rebuild_lun_table(ctlr_info_t *h, int first_time)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time,
+ int via_ioctl)
{
int ctlr = h->ctlr;
int num_luns;
int i;
int drv_found;
int drv_index = 0;
- __u32 lunid = 0;
+ unsigned char lunid[8] = CTLR_LUNID;
unsigned long flags;
if (!capable(CAP_SYS_RAWIO))
drv_found = 0;
/* skip holes in the array from already deleted drives */
- if (h->drv[i].raid_level == -1)
+ if (h->drv[i] == NULL)
continue;
for (j = 0; j < num_luns; j++) {
- memcpy(&lunid, &ld_buff->LUN[j][0], 4);
- lunid = le32_to_cpu(lunid);
- if (h->drv[i].LunID == lunid) {
+ memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid));
+ if (memcmp(h->drv[i]->LunID, lunid,
+ sizeof(lunid)) == 0) {
drv_found = 1;
break;
}
if (!drv_found) {
/* Deregister it from the OS, it's gone. */
spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
- h->drv[i].busy_configuring = 1;
+ h->drv[i]->busy_configuring = 1;
spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
- return_code = deregister_disk(h, i, 1);
- cciss_destroy_ld_sysfs_entry(&h->drv[i]);
- h->drv[i].busy_configuring = 0;
+ return_code = deregister_disk(h, i, 1, via_ioctl);
+ if (h->drv[i] != NULL)
+ h->drv[i]->busy_configuring = 0;
}
}
drv_found = 0;
- memcpy(&lunid, &ld_buff->LUN[i][0], 4);
- lunid = le32_to_cpu(lunid);
-
+ memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid));
/* Find if the LUN is already in the drive array
* of the driver. If so then update its info
* if not in use. If it does not exist then find
* the first free index and add it.
*/
for (j = 0; j <= h->highest_lun; j++) {
- if (h->drv[j].raid_level != -1 &&
- h->drv[j].LunID == lunid) {
+ if (h->drv[j] != NULL &&
+ memcmp(h->drv[j]->LunID, lunid,
+ sizeof(h->drv[j]->LunID)) == 0) {
drv_index = j;
drv_found = 1;
break;
if (drv_index == -1)
goto freeret;
}
- cciss_update_drive_info(ctlr, drv_index, first_time);
+ cciss_update_drive_info(ctlr, drv_index, first_time,
+ via_ioctl);
} /* end for */
freeret:
goto freeret;
}
+static void cciss_clear_drive_info(drive_info_struct *drive_info)
+{
+ /* zero out the disk size info */
+ drive_info->nr_blocks = 0;
+ drive_info->block_size = 0;
+ drive_info->heads = 0;
+ drive_info->sectors = 0;
+ drive_info->cylinders = 0;
+ drive_info->raid_level = -1;
+ memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no));
+ memset(drive_info->model, 0, sizeof(drive_info->model));
+ memset(drive_info->rev, 0, sizeof(drive_info->rev));
+ memset(drive_info->vendor, 0, sizeof(drive_info->vendor));
+ /*
+ * don't clear the LUNID though, we need to remember which
+ * one this one is.
+ */
+}
+
/* This function will deregister the disk and it's queue from the
* kernel. It must be called with the controller lock held and the
* drv structures busy_configuring flag set. It's parameters are:
* the disk in preparation for re-adding it. In this case
* the highest_lun should be left unchanged and the LunID
* should not be cleared.
+ * via_ioctl
+ * This indicates whether we've reached this path via ioctl.
+ * This affects the maximum usage count allowed for c0d0 to be messed with.
+ * If this path is reached via ioctl(), then the max_usage_count will
+ * be 1, as the process calling ioctl() has got to have the device open.
+ * If we get here via sysfs, then the max usage count will be zero.
*/
static int deregister_disk(ctlr_info_t *h, int drv_index,
- int clear_all)
+ int clear_all, int via_ioctl)
{
int i;
struct gendisk *disk;
drive_info_struct *drv;
+ int recalculate_highest_lun;
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
- drv = &h->drv[drv_index];
+ drv = h->drv[drv_index];
disk = h->gendisk[drv_index];
/* make sure logical volume is NOT is use */
if (clear_all || (h->gendisk[0] == disk)) {
- if (drv->usage_count > 1)
+ if (drv->usage_count > via_ioctl)
return -EBUSY;
} else if (drv->usage_count > 0)
return -EBUSY;
+ recalculate_highest_lun = (drv == h->drv[h->highest_lun]);
+
/* invalidate the devices and deregister the disk. If it is disk
* zero do not deregister it but just zero out it's values. This
* allows us to delete disk zero but keep the controller registered.
*/
if (h->gendisk[0] != disk) {
struct request_queue *q = disk->queue;
- if (disk->flags & GENHD_FL_UP)
+ if (disk->flags & GENHD_FL_UP) {
+ cciss_destroy_ld_sysfs_entry(h, drv_index, 0);
del_gendisk(disk);
- if (q) {
- blk_cleanup_queue(q);
- /* Set drv->queue to NULL so that we do not try
- * to call blk_start_queue on this queue in the
- * interrupt handler
- */
- drv->queue = NULL;
}
+ if (q)
+ blk_cleanup_queue(q);
/* If clear_all is set then we are deleting the logical
* drive, not just refreshing its info. For drives
* other than disk 0 we will call put_disk. We do not
}
} else {
set_capacity(disk, 0);
+ cciss_clear_drive_info(drv);
}
--h->num_luns;
- /* zero out the disk size info */
- drv->nr_blocks = 0;
- drv->block_size = 0;
- drv->heads = 0;
- drv->sectors = 0;
- drv->cylinders = 0;
- drv->raid_level = -1; /* This can be used as a flag variable to
- * indicate that this element of the drive
- * array is free.
- */
-
- if (clear_all) {
- /* check to see if it was the last disk */
- if (drv == h->drv + h->highest_lun) {
- /* if so, find the new hightest lun */
- int i, newhighest = -1;
- for (i = 0; i <= h->highest_lun; i++) {
- /* if the disk has size > 0, it is available */
- if (h->drv[i].heads)
- newhighest = i;
- }
- h->highest_lun = newhighest;
- }
- drv->LunID = 0;
+ /* if it was the last disk, find the new hightest lun */
+ if (clear_all && recalculate_highest_lun) {
+ int i, newhighest = -1;
+ for (i = 0; i <= h->highest_lun; i++) {
+ /* if the disk has size > 0, it is available */
+ if (h->drv[i] && h->drv[i]->heads)
+ newhighest = i;
+ }
+ h->highest_lun = newhighest;
}
return 0;
}
} else { /* Get geometry failed */
printk(KERN_WARNING "cciss: reading geometry failed\n");
}
- printk(KERN_INFO " heads=%d, sectors=%d, cylinders=%d\n\n",
- drv->heads, drv->sectors, drv->cylinders);
}
static void
*total_size = 0;
*block_size = BLOCK_SIZE;
}
- if (*total_size != 0)
- printk(KERN_INFO " blocks= %llu block_size= %d\n",
- (unsigned long long)*total_size+1, *block_size);
kfree(buf);
}
InquiryData_struct *inq_buff = NULL;
for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
- if (h->drv[logvol].LunID == drv->LunID) {
+ if (memcmp(h->drv[logvol]->LunID, drv->LunID,
+ sizeof(drv->LunID)) == 0) {
FOUND = 1;
break;
}
/* The first 2 bits are reserved for controller error reporting. */
c->Header.Tag.lower = (c->cmdindex << 3);
c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */
- c->Header.LUN.LogDev.VolId = drv->LunID;
- c->Header.LUN.LogDev.Mode = 1;
+ memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
c->Request.Type.Type = TYPE_CMD; // It is a command.
c->Request.Type.Attribute = ATTR_SIMPLE;
return IRQ_HANDLED;
}
+/**
+ * add_to_scan_list() - add controller to rescan queue
+ * @h: Pointer to the controller.
+ *
+ * Adds the controller to the rescan queue if not already on the queue.
+ *
+ * returns 1 if added to the queue, 0 if skipped (could be on the
+ * queue already, or the controller could be initializing or shutting
+ * down).
+ **/
+static int add_to_scan_list(struct ctlr_info *h)
+{
+ struct ctlr_info *test_h;
+ int found = 0;
+ int ret = 0;
+
+ if (h->busy_initializing)
+ return 0;
+
+ if (!mutex_trylock(&h->busy_shutting_down))
+ return 0;
+
+ mutex_lock(&scan_mutex);
+ list_for_each_entry(test_h, &scan_q, scan_list) {
+ if (test_h == h) {
+ found = 1;
+ break;
+ }
+ }
+ if (!found && !h->busy_scanning) {
+ INIT_COMPLETION(h->scan_wait);
+ list_add_tail(&h->scan_list, &scan_q);
+ ret = 1;
+ }
+ mutex_unlock(&scan_mutex);
+ mutex_unlock(&h->busy_shutting_down);
+
+ return ret;
+}
+
+/**
+ * remove_from_scan_list() - remove controller from rescan queue
+ * @h: Pointer to the controller.
+ *
+ * Removes the controller from the rescan queue if present. Blocks if
+ * the controller is currently conducting a rescan.
+ **/
+static void remove_from_scan_list(struct ctlr_info *h)
+{
+ struct ctlr_info *test_h, *tmp_h;
+ int scanning = 0;
+
+ mutex_lock(&scan_mutex);
+ list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) {
+ if (test_h == h) {
+ list_del(&h->scan_list);
+ complete_all(&h->scan_wait);
+ mutex_unlock(&scan_mutex);
+ return;
+ }
+ }
+ if (&h->busy_scanning)
+ scanning = 0;
+ mutex_unlock(&scan_mutex);
+
+ if (scanning)
+ wait_for_completion(&h->scan_wait);
+}
+
+/**
+ * scan_thread() - kernel thread used to rescan controllers
+ * @data: Ignored.
+ *
+ * A kernel thread used scan for drive topology changes on
+ * controllers. The thread processes only one controller at a time
+ * using a queue. Controllers are added to the queue using
+ * add_to_scan_list() and removed from the queue either after done
+ * processing or using remove_from_scan_list().
+ *
+ * returns 0.
+ **/
static int scan_thread(void *data)
{
- ctlr_info_t *h = data;
- int rc;
- DECLARE_COMPLETION_ONSTACK(wait);
- h->rescan_wait = &wait;
+ struct ctlr_info *h;
- for (;;) {
- rc = wait_for_completion_interruptible(&wait);
+ while (1) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
if (kthread_should_stop())
break;
- if (!rc)
- rebuild_lun_table(h, 0);
+
+ while (1) {
+ mutex_lock(&scan_mutex);
+ if (list_empty(&scan_q)) {
+ mutex_unlock(&scan_mutex);
+ break;
+ }
+
+ h = list_entry(scan_q.next,
+ struct ctlr_info,
+ scan_list);
+ list_del(&h->scan_list);
+ h->busy_scanning = 1;
+ mutex_unlock(&scan_mutex);
+
+ if (h) {
+ rebuild_lun_table(h, 0, 0);
+ complete_all(&h->scan_wait);
+ mutex_lock(&scan_mutex);
+ h->busy_scanning = 0;
+ mutex_unlock(&scan_mutex);
+ }
+ }
}
+
return 0;
}
case REPORT_LUNS_CHANGED:
printk(KERN_WARNING "cciss%d: report LUN data "
"changed\n", h->ctlr);
- if (h->rescan_wait)
- complete(h->rescan_wait);
+ add_to_scan_list(h);
+ wake_up_process(cciss_scan_thread);
return 1;
break;
case POWER_OR_RESET:
__u64 cfg_offset;
__u32 cfg_base_addr;
__u64 cfg_base_addr_index;
- int i, err;
+ int i, prod_index, err;
+
+ subsystem_vendor_id = pdev->subsystem_vendor;
+ subsystem_device_id = pdev->subsystem_device;
+ board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
+ subsystem_vendor_id);
+
+ for (i = 0; i < ARRAY_SIZE(products); i++) {
+ /* Stand aside for hpsa driver on request */
+ if (cciss_allow_hpsa && products[i].board_id == HPSA_BOUNDARY)
+ return -ENODEV;
+ if (board_id == products[i].board_id)
+ break;
+ }
+ prod_index = i;
+ if (prod_index == ARRAY_SIZE(products)) {
+ dev_warn(&pdev->dev,
+ "unrecognized board ID: 0x%08lx, ignoring.\n",
+ (unsigned long) board_id);
+ return -ENODEV;
+ }
/* check to see if controller has been disabled */
/* BEFORE trying to enable it */
return err;
}
- subsystem_vendor_id = pdev->subsystem_vendor;
- subsystem_device_id = pdev->subsystem_device;
- board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
- subsystem_vendor_id);
-
#ifdef CCISS_DEBUG
printk("command = %x\n", command);
printk("irq = %x\n", pdev->irq);
if (scratchpad == CCISS_FIRMWARE_READY)
break;
set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(HZ / 10); /* wait 100ms */
+ schedule_timeout(msecs_to_jiffies(100)); /* wait 100ms */
}
if (scratchpad != CCISS_FIRMWARE_READY) {
printk(KERN_WARNING "cciss: Board not ready. Timed out.\n");
* leave a little room for ioctl calls.
*/
c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
- for (i = 0; i < ARRAY_SIZE(products); i++) {
- if (board_id == products[i].board_id) {
- c->product_name = products[i].product_name;
- c->access = *(products[i].access);
- c->nr_cmds = c->max_commands - 4;
- break;
- }
- }
+ c->product_name = products[prod_index].product_name;
+ c->access = *(products[prod_index].access);
+ c->nr_cmds = c->max_commands - 4;
if ((readb(&c->cfgtable->Signature[0]) != 'C') ||
(readb(&c->cfgtable->Signature[1]) != 'I') ||
(readb(&c->cfgtable->Signature[2]) != 'S') ||
err = -ENODEV;
goto err_out_free_res;
}
- /* We didn't find the controller in our list. We know the
- * signature is valid. If it's an HP device let's try to
- * bind to the device and fire it up. Otherwise we bail.
- */
- if (i == ARRAY_SIZE(products)) {
- if (subsystem_vendor_id == PCI_VENDOR_ID_HP) {
- c->product_name = products[i-1].product_name;
- c->access = *(products[i-1].access);
- c->nr_cmds = c->max_commands - 4;
- printk(KERN_WARNING "cciss: This is an unknown "
- "Smart Array controller.\n"
- "cciss: Please update to the latest driver "
- "available from www.hp.com.\n");
- } else {
- printk(KERN_WARNING "cciss: Sorry, I don't know how"
- " to access the Smart Array controller %08lx\n"
- , (unsigned long)board_id);
- err = -ENODEV;
- goto err_out_free_res;
- }
- }
#ifdef CONFIG_X86
{
/* Need to enable prefetch in the SCSI core for 6400 in x86 */
break;
/* delay and try again */
set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(10);
+ schedule_timeout(msecs_to_jiffies(1));
}
#ifdef CCISS_DEBUG
return -1;
}
-static void free_hba(int i)
+static void free_hba(int n)
{
- ctlr_info_t *p = hba[i];
- int n;
+ ctlr_info_t *h = hba[n];
+ int i;
- hba[i] = NULL;
- for (n = 0; n < CISS_MAX_LUN; n++)
- put_disk(p->gendisk[n]);
- kfree(p);
+ hba[n] = NULL;
+ for (i = 0; i < h->highest_lun + 1; i++)
+ if (h->gendisk[i] != NULL)
+ put_disk(h->gendisk[i]);
+ kfree(h);
}
/* Send a message CDB to the firmware. */
hba[i]->busy_initializing = 1;
INIT_HLIST_HEAD(&hba[i]->cmpQ);
INIT_HLIST_HEAD(&hba[i]->reqQ);
+ mutex_init(&hba[i]->busy_shutting_down);
if (cciss_pci_init(hba[i], pdev) != 0)
- goto clean0;
+ goto clean_no_release_regions;
sprintf(hba[i]->devname, "cciss%d", i);
hba[i]->ctlr = i;
hba[i]->pdev = pdev;
+ init_completion(&hba[i]->scan_wait);
+
if (cciss_create_hba_sysfs_entry(hba[i]))
goto clean0;
hba[i]->num_luns = 0;
hba[i]->highest_lun = -1;
for (j = 0; j < CISS_MAX_LUN; j++) {
- hba[i]->drv[j].raid_level = -1;
- hba[i]->drv[j].queue = NULL;
+ hba[i]->drv[j] = NULL;
hba[i]->gendisk[j] = NULL;
}
hba[i]->cciss_max_sectors = 2048;
+ rebuild_lun_table(hba[i], 1, 0);
hba[i]->busy_initializing = 0;
-
- rebuild_lun_table(hba[i], 1);
- hba[i]->cciss_scan_thread = kthread_run(scan_thread, hba[i],
- "cciss_scan%02d", i);
- if (IS_ERR(hba[i]->cciss_scan_thread))
- return PTR_ERR(hba[i]->cciss_scan_thread);
-
return 1;
clean4:
clean1:
cciss_destroy_hba_sysfs_entry(hba[i]);
clean0:
+ pci_release_regions(pdev);
+clean_no_release_regions:
hba[i]->busy_initializing = 0;
- /* cleanup any queues that may have been initialized */
- for (j=0; j <= hba[i]->highest_lun; j++){
- drive_info_struct *drv = &(hba[i]->drv[j]);
- if (drv->queue)
- blk_cleanup_queue(drv->queue);
- }
+
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
*/
- pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
free_hba(i);
return -1;
return;
}
- kthread_stop(hba[i]->cciss_scan_thread);
+ mutex_lock(&hba[i]->busy_shutting_down);
+ remove_from_scan_list(hba[i]);
remove_proc_entry(hba[i]->devname, proc_cciss);
unregister_blkdev(hba[i]->major, hba[i]->devname);
if (disk) {
struct request_queue *q = disk->queue;
- if (disk->flags & GENHD_FL_UP)
+ if (disk->flags & GENHD_FL_UP) {
+ cciss_destroy_ld_sysfs_entry(hba[i], j, 1);
del_gendisk(disk);
+ }
if (q)
blk_cleanup_queue(q);
}
pci_release_regions(pdev);
pci_set_drvdata(pdev, NULL);
cciss_destroy_hba_sysfs_entry(hba[i]);
+ mutex_unlock(&hba[i]->busy_shutting_down);
free_hba(i);
}
if (err)
return err;
+ /* Start the scan thread */
+ cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan");
+ if (IS_ERR(cciss_scan_thread)) {
+ err = PTR_ERR(cciss_scan_thread);
+ goto err_bus_unregister;
+ }
+
/* Register for our PCI devices */
err = pci_register_driver(&cciss_pci_driver);
if (err)
- goto err_bus_register;
+ goto err_thread_stop;
- return 0;
+ return err;
-err_bus_register:
+err_thread_stop:
+ kthread_stop(cciss_scan_thread);
+err_bus_unregister:
bus_unregister(&cciss_bus_type);
+
return err;
}
cciss_remove_one(hba[i]->pdev);
}
}
+ kthread_stop(cciss_scan_thread);
remove_proc_entry("driver/cciss", NULL);
bus_unregister(&cciss_bus_type);
}
#define CCISS_H
#include <linux/genhd.h>
+#include <linux/mutex.h>
#include "cciss_cmd.h"
};
typedef struct _drive_info_struct
{
- __u32 LunID;
+ unsigned char LunID[8];
int usage_count;
struct request_queue *queue;
sector_t nr_blocks;
char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
char model[MODEL_LEN + 1]; /* SCSI model string */
char rev[REV_LEN + 1]; /* SCSI revision string */
+ char device_initialized; /* indicates whether dev is initialized */
} drive_info_struct;
struct ctlr_info
BYTE cciss_read_capacity;
// information about each logical volume
- drive_info_struct drv[CISS_MAX_LUN];
+ drive_info_struct *drv[CISS_MAX_LUN];
struct access_method access;
int nr_frees;
int busy_configuring;
int busy_initializing;
+ int busy_scanning;
+ struct mutex busy_shutting_down;
/* This element holds the zero based queue number of the last
* queue to be started. It is used for fairness.
/* and saved for later processing */
#endif
unsigned char alive;
- struct completion *rescan_wait;
- struct task_struct *cciss_scan_thread;
+ struct list_head scan_list;
+ struct completion scan_wait;
struct device dev;
};
#include <linux/blkpg.h>
#include <linux/timer.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/hdreg.h>
#include <linux/spinlock.h>
#ifdef CONFIG_PROC_FS
static void ida_procinit(int i);
-static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data);
#else
static void ida_procinit(int i) {}
#endif
#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *proc_array;
+static const struct file_operations ida_proc_fops;
/*
* Get us a file in /proc/array that says something about each controller.
if (!proc_array) return;
}
- create_proc_read_entry(hba[i]->devname, 0, proc_array,
- ida_proc_get_info, hba[i]);
+ proc_create_data(hba[i]->devname, 0, proc_array, &ida_proc_fops, hba[i]);
}
/*
* Report information about this controller.
*/
-static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+static int ida_proc_show(struct seq_file *m, void *v)
{
- off_t pos = 0;
- off_t len = 0;
- int size, i, ctlr;
- ctlr_info_t *h = (ctlr_info_t*)data;
+ int i, ctlr;
+ ctlr_info_t *h = (ctlr_info_t*)m->private;
drv_info_t *drv;
#ifdef CPQ_PROC_PRINT_QUEUES
cmdlist_t *c;
#endif
ctlr = h->ctlr;
- size = sprintf(buffer, "%s: Compaq %s Controller\n"
+ seq_printf(m, "%s: Compaq %s Controller\n"
" Board ID: 0x%08lx\n"
" Firmware Revision: %c%c%c%c\n"
" Controller Sig: 0x%08lx\n"
h->log_drives, h->phys_drives,
h->Qdepth, h->maxQsinceinit);
- pos += size; len += size;
-
- size = sprintf(buffer+len, "Logical Drive Info:\n");
- pos += size; len += size;
+ seq_puts(m, "Logical Drive Info:\n");
for(i=0; i<h->log_drives; i++) {
drv = &h->drv[i];
- size = sprintf(buffer+len, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
+ seq_printf(m, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
ctlr, i, drv->blk_size, drv->nr_blks);
- pos += size; len += size;
}
#ifdef CPQ_PROC_PRINT_QUEUES
spin_lock_irqsave(IDA_LOCK(h->ctlr), flags);
- size = sprintf(buffer+len, "\nCurrent Queues:\n");
- pos += size; len += size;
+ seq_puts(m, "\nCurrent Queues:\n");
c = h->reqQ;
- size = sprintf(buffer+len, "reqQ = %p", c); pos += size; len += size;
+ seq_printf(m, "reqQ = %p", c);
if (c) c=c->next;
while(c && c != h->reqQ) {
- size = sprintf(buffer+len, "->%p", c);
- pos += size; len += size;
+ seq_printf(m, "->%p", c);
c=c->next;
}
c = h->cmpQ;
- size = sprintf(buffer+len, "\ncmpQ = %p", c); pos += size; len += size;
+ seq_printf(m, "\ncmpQ = %p", c);
if (c) c=c->next;
while(c && c != h->cmpQ) {
- size = sprintf(buffer+len, "->%p", c);
- pos += size; len += size;
+ seq_printf(m, "->%p", c);
c=c->next;
}
- size = sprintf(buffer+len, "\n"); pos += size; len += size;
+ seq_putc(m, '\n');
spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags);
#endif
- size = sprintf(buffer+len, "nr_allocs = %d\nnr_frees = %d\n",
+ seq_printf(m, "nr_allocs = %d\nnr_frees = %d\n",
h->nr_allocs, h->nr_frees);
- pos += size; len += size;
-
- *eof = 1;
- *start = buffer+offset;
- len -= offset;
- if (len>length)
- len = length;
- return len;
+ return 0;
+}
+
+static int ida_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ida_proc_show, PDE(inode)->data);
}
+
+static const struct file_operations ida_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = ida_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
#endif /* CONFIG_PROC_FS */
module_param_array(eisa, int, NULL, 0);
lo->lo_state = Lo_unbound;
/* This is safe: open() is still holding a reference. */
module_put(THIS_MODULE);
- if (max_part > 0)
+ if (max_part > 0 && bdev)
ioctl_by_bdev(bdev, BLKRRPART, 0);
mutex_unlock(&lo->lo_ctl_mutex);
/*
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/virtio.h>
-#include <linux/virtio_ids.h>
#include <linux/virtio_blk.h>
#include <linux/scatterlist.h>
vblk->vq->vq_ops->kick(vblk->vq);
}
-/* return ATA identify data
- */
-static int virtblk_identify(struct gendisk *disk, void *argp)
-{
- struct virtio_blk *vblk = disk->private_data;
- void *opaque;
- int err = -ENOMEM;
-
- opaque = kmalloc(VIRTIO_BLK_ID_BYTES, GFP_KERNEL);
- if (!opaque)
- goto out;
-
- err = virtio_config_buf(vblk->vdev, VIRTIO_BLK_F_IDENTIFY,
- offsetof(struct virtio_blk_config, identify), opaque,
- VIRTIO_BLK_ID_BYTES);
-
- if (err)
- goto out_kfree;
-
- if (copy_to_user(argp, opaque, VIRTIO_BLK_ID_BYTES))
- err = -EFAULT;
-
-out_kfree:
- kfree(opaque);
-out:
- return err;
-}
-
static void virtblk_prepare_flush(struct request_queue *q, struct request *req)
{
req->cmd_type = REQ_TYPE_LINUX_BLOCK;
{
struct gendisk *disk = bdev->bd_disk;
struct virtio_blk *vblk = disk->private_data;
- void __user *argp = (void __user *)data;
-
- if (cmd == HDIO_GET_IDENTITY)
- return virtblk_identify(disk, argp);
/*
* Only allow the generic SCSI ioctls if the host can support it.
if (!virtio_has_feature(vblk->vdev, VIRTIO_BLK_F_SCSI))
return -ENOTTY;
- return scsi_cmd_ioctl(disk->queue, disk, mode, cmd, argp);
+ return scsi_cmd_ioctl(disk->queue, disk, mode, cmd,
+ (void __user *)data);
}
/* We provide getgeo only to please some old bootloader/partitioning tools */
}
vblk->disk->queue->queuedata = vblk;
- queue_flag_set_unlocked(QUEUE_FLAG_VIRT, vblk->disk->queue);
if (index < 26) {
sprintf(vblk->disk->disk_name, "vd%c", 'a' + index % 26);
static unsigned int features[] = {
VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, VIRTIO_BLK_F_BLK_SIZE,
- VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_IDENTIFY, VIRTIO_BLK_F_FLUSH
+ VIRTIO_BLK_F_SCSI, VIRTIO_BLK_F_FLUSH
};
/*
return 0;
}
-static int cdrom_sysctl_info(ctl_table *ctl, int write, struct file * filp,
+static int cdrom_sysctl_info(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int pos;
goto done;
doit:
mutex_unlock(&cdrom_mutex);
- return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return proc_dostring(ctl, write, buffer, lenp, ppos);
done:
printk(KERN_INFO "cdrom: info buffer too small\n");
goto doit;
mutex_unlock(&cdrom_mutex);
}
-static int cdrom_sysctl_handler(ctl_table *ctl, int write, struct file * filp,
+static int cdrom_sysctl_handler(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write) {
config SX
tristate "Specialix SX (and SI) card support"
- depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) && BROKEN
help
This is a driver for the SX and SI multiport serial cards.
Please read the file <file:Documentation/serial/sx.txt> for details.
config RIO
tristate "Specialix RIO system support"
- depends on SERIAL_NONSTANDARD
+ depends on SERIAL_NONSTANDARD && BROKEN
help
This is a driver for the Specialix RIO, a smart serial card which
drives an outboard box that can support up to 128 ports. Product
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ZORRO && BROKEN_ON_SMP
+ depends on EXPERIMENTAL && ZORRO && BROKEN
---help---
This option supports the 2232 7-port serial card shipped with the
Amiga 2000 and other Zorro-bus machines, dating from 1989. At
The mmtimer device allows direct userspace access to the
Altix system timer.
+config UV_MMTIMER
+ tristate "UV_MMTIMER Memory mapped RTC for SGI UV"
+ depends on X86_UV
+ default m
+ help
+ The uv_mmtimer device allows direct userspace access to the
+ UV system timer.
+
source "drivers/char/tpm/Kconfig"
config TELCLOCK
obj-$(CONFIG_SGI_SNSC) += snsc.o snsc_event.o
obj-$(CONFIG_MSPEC) += mspec.o
obj-$(CONFIG_MMTIMER) += mmtimer.o
+obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o
obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_HVCS) += hvcs.o
obj-$(CONFIG_IBM_BSR) += bsr.o
struct agp_bridge_data {
const struct agp_version *version;
const struct agp_bridge_driver *driver;
- struct vm_operations_struct *vm_ops;
+ const struct vm_operations_struct *vm_ops;
void *previous_size;
void *current_size;
void *dev_private_data;
{ 0, 0, 0 }, /* filled in by alpha_core_agp_setup */
};
-struct vm_operations_struct alpha_core_agp_vm_ops = {
+static const struct vm_operations_struct alpha_core_agp_vm_ops = {
.fault = alpha_core_agp_vm_fault,
};
#define PCI_DEVICE_ID_INTEL_Q35_IG 0x29B2
#define PCI_DEVICE_ID_INTEL_Q33_HB 0x29D0
#define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2
+#define PCI_DEVICE_ID_INTEL_B43_HB 0x2E40
+#define PCI_DEVICE_ID_INTEL_B43_IG 0x2E42
#define PCI_DEVICE_ID_INTEL_GM45_HB 0x2A40
#define PCI_DEVICE_ID_INTEL_GM45_IG 0x2A42
#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \
+ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_B43_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \
agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB)
if (!intel_private.i8xx_page)
return;
- /* make page uncached */
- map_page_into_agp(intel_private.i8xx_page);
-
intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page);
if (!intel_private.i8xx_flush_page)
intel_i830_fini_flush();
}
+static void
+do_wbinvd(void *null)
+{
+ wbinvd();
+}
+
+/* The chipset_flush interface needs to get data that has already been
+ * flushed out of the CPU all the way out to main memory, because the GPU
+ * doesn't snoop those buffers.
+ *
+ * The 8xx series doesn't have the same lovely interface for flushing the
+ * chipset write buffers that the later chips do. According to the 865
+ * specs, it's 64 octwords, or 1KB. So, to get those previous things in
+ * that buffer out, we just fill 1KB and clflush it out, on the assumption
+ * that it'll push whatever was in there out. It appears to work.
+ */
static void intel_i830_chipset_flush(struct agp_bridge_data *bridge)
{
unsigned int *pg = intel_private.i8xx_flush_page;
- int i;
- for (i = 0; i < 256; i += 2)
- *(pg + i) = i;
+ memset(pg, 0, 1024);
- wmb();
+ if (cpu_has_clflush) {
+ clflush_cache_range(pg, 1024);
+ } else {
+ if (on_each_cpu(do_wbinvd, NULL, 1) != 0)
+ printk(KERN_ERR "Timed out waiting for cache flush.\n");
+ }
}
/* The intel i830 automatically initializes the agp aperture during POST.
case PCI_DEVICE_ID_INTEL_Q45_HB:
case PCI_DEVICE_ID_INTEL_G45_HB:
case PCI_DEVICE_ID_INTEL_G41_HB:
+ case PCI_DEVICE_ID_INTEL_B43_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_D_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_M_HB:
case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB:
"Q45/Q43", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0,
"G45/G43", NULL, &intel_i965_driver },
+ { PCI_DEVICE_ID_INTEL_B43_HB, PCI_DEVICE_ID_INTEL_B43_IG, 0,
+ "B43", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG, 0,
"G41", NULL, &intel_i965_driver },
{ PCI_DEVICE_ID_INTEL_IGDNG_D_HB, PCI_DEVICE_ID_INTEL_IGDNG_D_IG, 0,
ID(PCI_DEVICE_ID_INTEL_Q45_HB),
ID(PCI_DEVICE_ID_INTEL_G45_HB),
ID(PCI_DEVICE_ID_INTEL_G41_HB),
+ ID(PCI_DEVICE_ID_INTEL_B43_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB),
ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB),
.configure = parisc_agp_configure,
.fetch_size = parisc_agp_fetch_size,
.tlb_flush = parisc_agp_tlbflush,
- .mask_memory = parisc_agp_page_mask_memory,
+ .mask_memory = parisc_agp_mask_memory,
.masks = parisc_agp_masks,
.agp_enable = parisc_agp_enable,
.cache_flush = global_cache_flush,
return as ? 0 : -ENOMEM;
}
-static struct file_operations apm_bios_fops = {
+static const struct file_operations apm_bios_fops = {
.owner = THIS_MODULE,
.read = apm_read,
.poll = apm_poll,
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
/*
* Blackfin On-Chip OTP Memory Interface
- * Supports BF52x/BF54x
*
- * Copyright 2007-2008 Analog Devices Inc.
+ * Copyright 2007-2009 Analog Devices Inc.
*
* Enter bugs at http://blackfin.uclinux.org/
*
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/types.h>
+#include <mtd/mtd-abi.h>
#include <asm/blackfin.h>
+#include <asm/bfrom.h>
#include <asm/uaccess.h>
#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
static DEFINE_MUTEX(bfin_otp_lock);
-/* OTP Boot ROM functions */
-#define _BOOTROM_OTP_COMMAND 0xEF000018
-#define _BOOTROM_OTP_READ 0xEF00001A
-#define _BOOTROM_OTP_WRITE 0xEF00001C
-
-static u32 (* const otp_command)(u32 command, u32 value) = (void *)_BOOTROM_OTP_COMMAND;
-static u32 (* const otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)_BOOTROM_OTP_READ;
-static u32 (* const otp_write)(u32 page, u32 flags, u64 *page_content) = (void *)_BOOTROM_OTP_WRITE;
-
-/* otp_command(): defines for "command" */
-#define OTP_INIT 0x00000001
-#define OTP_CLOSE 0x00000002
-
-/* otp_{read,write}(): defines for "flags" */
-#define OTP_LOWER_HALF 0x00000000 /* select upper/lower 64-bit half (bit 0) */
-#define OTP_UPPER_HALF 0x00000001
-#define OTP_NO_ECC 0x00000010 /* do not use ECC */
-#define OTP_LOCK 0x00000020 /* sets page protection bit for page */
-#define OTP_ACCESS_READ 0x00001000
-#define OTP_ACCESS_READWRITE 0x00002000
-
-/* Return values for all functions */
-#define OTP_SUCCESS 0x00000000
-#define OTP_MASTER_ERROR 0x001
-#define OTP_WRITE_ERROR 0x003
-#define OTP_READ_ERROR 0x005
-#define OTP_ACC_VIO_ERROR 0x009
-#define OTP_DATA_MULT_ERROR 0x011
-#define OTP_ECC_MULT_ERROR 0x021
-#define OTP_PREV_WR_ERROR 0x041
-#define OTP_DATA_SB_WARN 0x100
-#define OTP_ECC_SB_WARN 0x200
-
/**
* bfin_otp_read - Read OTP pages
*
page = *pos / (sizeof(u64) * 2);
while (bytes_done < count) {
flags = (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF);
- stamp("processing page %i (%s)", page, (flags == OTP_UPPER_HALF ? "upper" : "lower"));
- ret = otp_read(page, flags, &content);
+ stamp("processing page %i (0x%x:%s)", page, flags,
+ (flags & OTP_UPPER_HALF ? "upper" : "lower"));
+ ret = bfrom_OtpRead(page, flags, &content);
if (ret & OTP_MASTER_ERROR) {
+ stamp("error from otp: 0x%x", ret);
bytes_done = -EIO;
break;
}
bytes_done = -EFAULT;
break;
}
- if (flags == OTP_UPPER_HALF)
+ if (flags & OTP_UPPER_HALF)
++page;
bytes_done += sizeof(content);
*pos += sizeof(content);
}
#ifdef CONFIG_BFIN_OTP_WRITE_ENABLE
+static bool allow_writes;
+
+/**
+ * bfin_otp_init_timing - setup OTP timing parameters
+ *
+ * Required before doing any write operation. Algorithms from HRM.
+ */
+static u32 bfin_otp_init_timing(void)
+{
+ u32 tp1, tp2, tp3, timing;
+
+ tp1 = get_sclk() / 1000000;
+ tp2 = (2 * get_sclk() / 10000000) << 8;
+ tp3 = (0x1401) << 15;
+ timing = tp1 | tp2 | tp3;
+ if (bfrom_OtpCommand(OTP_INIT, timing))
+ return 0;
+
+ return timing;
+}
+
+/**
+ * bfin_otp_deinit_timing - set timings to only allow reads
+ *
+ * Should be called after all writes are done.
+ */
+static void bfin_otp_deinit_timing(u32 timing)
+{
+ /* mask bits [31:15] so that any attempts to write fail */
+ bfrom_OtpCommand(OTP_CLOSE, 0);
+ bfrom_OtpCommand(OTP_INIT, timing & ~(-1 << 15));
+ bfrom_OtpCommand(OTP_CLOSE, 0);
+}
+
/**
- * bfin_otp_write - Write OTP pages
+ * bfin_otp_write - write OTP pages
*
* All writes must be in half page chunks (half page == 64 bits).
*/
static ssize_t bfin_otp_write(struct file *filp, const char __user *buff, size_t count, loff_t *pos)
{
- stampit();
+ ssize_t bytes_done;
+ u32 timing, page, base_flags, flags, ret;
+ u64 content;
+
+ if (!allow_writes)
+ return -EACCES;
if (count % sizeof(u64))
return -EMSGSIZE;
if (mutex_lock_interruptible(&bfin_otp_lock))
return -ERESTARTSYS;
- /* need otp_init() documentation before this can be implemented */
+ stampit();
+
+ timing = bfin_otp_init_timing();
+ if (timing == 0) {
+ mutex_unlock(&bfin_otp_lock);
+ return -EIO;
+ }
+
+ base_flags = OTP_CHECK_FOR_PREV_WRITE;
+
+ bytes_done = 0;
+ page = *pos / (sizeof(u64) * 2);
+ while (bytes_done < count) {
+ flags = base_flags | (*pos % (sizeof(u64) * 2) ? OTP_UPPER_HALF : OTP_LOWER_HALF);
+ stamp("processing page %i (0x%x:%s) from %p", page, flags,
+ (flags & OTP_UPPER_HALF ? "upper" : "lower"), buff + bytes_done);
+ if (copy_from_user(&content, buff + bytes_done, sizeof(content))) {
+ bytes_done = -EFAULT;
+ break;
+ }
+ ret = bfrom_OtpWrite(page, flags, &content);
+ if (ret & OTP_MASTER_ERROR) {
+ stamp("error from otp: 0x%x", ret);
+ bytes_done = -EIO;
+ break;
+ }
+ if (flags & OTP_UPPER_HALF)
+ ++page;
+ bytes_done += sizeof(content);
+ *pos += sizeof(content);
+ }
+
+ bfin_otp_deinit_timing(timing);
mutex_unlock(&bfin_otp_lock);
+ return bytes_done;
+}
+
+static long bfin_otp_ioctl(struct file *filp, unsigned cmd, unsigned long arg)
+{
+ stampit();
+
+ switch (cmd) {
+ case OTPLOCK: {
+ u32 timing;
+ int ret = -EIO;
+
+ if (!allow_writes)
+ return -EACCES;
+
+ if (mutex_lock_interruptible(&bfin_otp_lock))
+ return -ERESTARTSYS;
+
+ timing = bfin_otp_init_timing();
+ if (timing) {
+ u32 otp_result = bfrom_OtpWrite(arg, OTP_LOCK, NULL);
+ stamp("locking page %lu resulted in 0x%x", arg, otp_result);
+ if (!(otp_result & OTP_MASTER_ERROR))
+ ret = 0;
+
+ bfin_otp_deinit_timing(timing);
+ }
+
+ mutex_unlock(&bfin_otp_lock);
+
+ return ret;
+ }
+
+ case MEMLOCK:
+ allow_writes = false;
+ return 0;
+
+ case MEMUNLOCK:
+ allow_writes = true;
+ return 0;
+ }
+
return -EINVAL;
}
#else
# define bfin_otp_write NULL
+# define bfin_otp_ioctl NULL
#endif
-static struct file_operations bfin_otp_fops = {
- .owner = THIS_MODULE,
- .read = bfin_otp_read,
- .write = bfin_otp_write,
+static const struct file_operations bfin_otp_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = bfin_otp_ioctl,
+ .read = bfin_otp_read,
+ .write = bfin_otp_write,
};
static struct miscdevice bfin_otp_misc_device = {
continue;
}
#ifdef MODULE
- if (isparam && irq[i])
+ if (isparam && i < NR_CARDS && irq[i])
cy_isa_irq = irq[i];
else
#endif
#include <linux/errno.h> /* for -EBUSY */
#include <linux/ioport.h> /* for request_region */
#include <linux/delay.h> /* for loops_per_jiffy */
+#include <linux/sched.h>
#include <linux/smp_lock.h> /* cycle_kernel_lock() */
#include <asm/io.h> /* for inb_p, outb_p, inb, outb, etc. */
#include <asm/uaccess.h> /* for get_user, etc. */
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <linux/serial.h>
#include <linux/delay.h>
#include <linux/ctype.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/tty.h>
+#include <linux/sched.h>
#include <linux/serial.h>
#include <linux/mm.h>
#include <linux/generic_serial.h>
#define RTC_VERSION "1.07"
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/fcntl.h>
unsigned long m, t;
t = devp->hd_ireqfreq;
- m = read_counter(&devp->hd_hpet->hpet_mc);
- write_counter(t + m + devp->hd_hpets->hp_delta,
- &devp->hd_timer->hpet_compare);
+ m = read_counter(&devp->hd_timer->hpet_compare);
+ write_counter(t + m, &devp->hd_timer->hpet_compare);
}
if (devp->hd_flags & HPET_SHARED_IRQ)
g = v | Tn_32MODE_CNF_MASK | Tn_INT_ENB_CNF_MASK;
if (devp->hd_flags & HPET_PERIODIC) {
- write_counter(t, &timer->hpet_compare);
g |= Tn_TYPE_CNF_MASK;
- v |= Tn_TYPE_CNF_MASK;
- writeq(v, &timer->hpet_config);
- v |= Tn_VAL_SET_CNF_MASK;
+ v |= Tn_TYPE_CNF_MASK | Tn_VAL_SET_CNF_MASK;
writeq(v, &timer->hpet_config);
local_irq_save(flags);
- /* NOTE: what we modify here is a hidden accumulator
+ /*
+ * NOTE: First we modify the hidden accumulator
* register supported by periodic-capable comparators.
* We never want to modify the (single) counter; that
- * would affect all the comparators.
+ * would affect all the comparators. The value written
+ * is the counter value when the first interrupt is due.
*/
m = read_counter(&hpet->hpet_mc);
write_counter(t + m + hpetp->hp_delta, &timer->hpet_compare);
+ /*
+ * Then we modify the comparator, indicating the period
+ * for subsequent interrupt.
+ */
+ write_counter(t, &timer->hpet_compare);
} else {
local_irq_save(flags);
m = read_counter(&hpet->hpet_mc);
EXPORT_SYMBOL_GPL(hvc_poll);
/**
- * hvc_resize() - Update terminal window size information.
+ * __hvc_resize() - Update terminal window size information.
* @hp: HVC console pointer
* @ws: Terminal window size structure
*
*
* Locking: Locking free; the function MUST be called holding hp->lock
*/
-void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+void __hvc_resize(struct hvc_struct *hp, struct winsize ws)
{
hp->ws = ws;
schedule_work(&hp->tty_resize);
}
-EXPORT_SYMBOL_GPL(hvc_resize);
+EXPORT_SYMBOL_GPL(__hvc_resize);
/*
* This kthread is either polling or interrupt driven. This is determined by
#define HVC_CONSOLE_H
#include <linux/kref.h>
#include <linux/tty.h>
+#include <linux/spinlock.h>
/*
* This is the max number of console adapters that can/will be found as
void hvc_kick(void);
/* Resize hvc tty terminal window */
-extern void hvc_resize(struct hvc_struct *hp, struct winsize ws);
+extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws);
+
+static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&hp->lock, flags);
+ __hvc_resize(hp, ws);
+ spin_unlock_irqrestore(&hp->lock, flags);
+}
/* default notifier for irq based notification */
extern int notifier_add_irq(struct hvc_struct *hp, int data);
case MSG_TYPE_WINSIZE:
if (rb->mbuf->datalen != sizeof(struct winsize))
break;
- hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
+ /* The caller must ensure that the hvc is locked, which
+ * is the case when called from hvc_iucv_get_chars() */
+ __hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
break;
case MSG_TYPE_ERROR: /* ignored ... */
notify_remote_via_evtchn(xen_start_info->console.domU.evtchn);
}
-static int write_console(uint32_t vtermno, const char *data, int len)
+static int __write_console(const char *data, int len)
{
struct xencons_interface *intf = xencons_interface();
XENCONS_RING_IDX cons, prod;
return sent;
}
+static int write_console(uint32_t vtermno, const char *data, int len)
+{
+ int ret = len;
+
+ /*
+ * Make sure the whole buffer is emitted, polling if
+ * necessary. We don't ever want to rely on the hvc daemon
+ * because the most interesting console output is when the
+ * kernel is crippled.
+ */
+ while (len) {
+ int sent = __write_console(data, len);
+
+ data += sent;
+ len -= sent;
+
+ if (unlikely(len))
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
+ }
+
+ return ret;
+}
+
static int read_console(uint32_t vtermno, char *buf, int len)
{
struct xencons_interface *intf = xencons_interface();
if (!res)
return -ENOENT;
- mem = request_mem_region(res->start, res->end - res->start + 1,
+ mem = request_mem_region(res->start, resource_size(res),
pdev->name);
if (mem == NULL) {
ret = -EBUSY;
}
dev_set_drvdata(&pdev->dev, mem);
- rng_base = ioremap(res->start, res->end - res->start + 1);
+ rng_base = ioremap(res->start, resource_size(res));
if (!rng_base) {
ret = -ENOMEM;
goto err_ioremap;
#include <linux/scatterlist.h>
#include <linux/spinlock.h>
#include <linux/virtio.h>
-#include <linux/virtio_ids.h>
#include <linux/virtio_rng.h>
/* The host will fill any buffer we give it with sweet, sweet randomness. We
return 0;
}
-static void virtrng_remove(struct virtio_device *vdev)
+static void __devexit virtrng_remove(struct virtio_device *vdev)
{
vdev->config->reset(vdev);
hwrng_unregister(&virtio_hwrng);
#include <linux/errno.h>
#include <asm/system.h>
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/ipmi.h>
#include <linux/errno.h>
#include <asm/system.h>
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/mutex.h>
#include <linux/slab.h>
/*****************************************************************************/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/interrupt.h>
}
#endif
-static struct vm_operations_struct mmap_mem_ops = {
+static const struct vm_operations_struct mmap_mem_ops = {
#ifdef CONFIG_HAVE_IOREMAP_PROT
.access = generic_access_phys
#endif
if (chunk > PAGE_SIZE)
chunk = PAGE_SIZE; /* Just for latency reasons */
- unwritten = clear_user(buf, chunk);
+ unwritten = __clear_user(buf, chunk);
written += chunk - unwritten;
if (unwritten)
break;
return VM_FAULT_NOPAGE;
}
-static struct vm_operations_struct mspec_vm_ops = {
+static const struct vm_operations_struct mspec_vm_ops = {
.open = mspec_open,
.close = mspec_close,
.fault = mspec_fault,
case IOCTL_MW_REGISTER_IPC: {
unsigned int ipcnum = (unsigned int) ioarg;
- PRINTK_3(TRACE_MWAVE,
- "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
- " ipcnum %x entry usIntCount %x\n",
- ipcnum,
- pDrvData->IPCs[ipcnum].usIntCount);
-
if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_ioctl:"
ipcnum);
return -EINVAL;
}
+ PRINTK_3(TRACE_MWAVE,
+ "mwavedd::mwave_ioctl IOCTL_MW_REGISTER_IPC"
+ " ipcnum %x entry usIntCount %x\n",
+ ipcnum,
+ pDrvData->IPCs[ipcnum].usIntCount);
+
lock_kernel();
pDrvData->IPCs[ipcnum].bIsHere = FALSE;
pDrvData->IPCs[ipcnum].bIsEnabled = TRUE;
case IOCTL_MW_GET_IPC: {
unsigned int ipcnum = (unsigned int) ioarg;
- PRINTK_3(TRACE_MWAVE,
- "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
- " ipcnum %x, usIntCount %x\n",
- ipcnum,
- pDrvData->IPCs[ipcnum].usIntCount);
if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
PRINTK_ERROR(KERN_ERR_MWAVE
"mwavedd::mwave_ioctl:"
" Invalid ipcnum %x\n", ipcnum);
return -EINVAL;
}
+ PRINTK_3(TRACE_MWAVE,
+ "mwavedd::mwave_ioctl IOCTL_MW_GET_IPC"
+ " ipcnum %x, usIntCount %x\n",
+ ipcnum,
+ pDrvData->IPCs[ipcnum].usIntCount);
lock_kernel();
if (pDrvData->IPCs[ipcnum].bIsEnabled == TRUE) {
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
+#include <linux/sched.h>
#include <linux/serial.h>
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/fcntl.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/major.h>
#include <linux/mm.h>
return 0;
}
+/* Traditional BSD devices */
+#ifdef CONFIG_LEGACY_PTYS
+
static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
{
struct tty_struct *o_tty;
return -ENOMEM;
}
-
-static const struct tty_operations pty_ops = {
- .install = pty_install,
- .open = pty_open,
- .close = pty_close,
- .write = pty_write,
- .write_room = pty_write_room,
- .flush_buffer = pty_flush_buffer,
- .chars_in_buffer = pty_chars_in_buffer,
- .unthrottle = pty_unthrottle,
- .set_termios = pty_set_termios,
- .resize = pty_resize
-};
-
-/* Traditional BSD devices */
-#ifdef CONFIG_LEGACY_PTYS
-static struct tty_driver *pty_driver, *pty_slave_driver;
-
static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
unsigned int cmd, unsigned long arg)
{
static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
module_param(legacy_count, int, 0);
-static const struct tty_operations pty_ops_bsd = {
+/*
+ * The master side of a pty can do TIOCSPTLCK and thus
+ * has pty_bsd_ioctl.
+ */
+static const struct tty_operations master_pty_ops_bsd = {
+ .install = pty_install,
.open = pty_open,
.close = pty_close,
.write = pty_write,
.resize = pty_resize
};
+static const struct tty_operations slave_pty_ops_bsd = {
+ .install = pty_install,
+ .open = pty_open,
+ .close = pty_close,
+ .write = pty_write,
+ .write_room = pty_write_room,
+ .flush_buffer = pty_flush_buffer,
+ .chars_in_buffer = pty_chars_in_buffer,
+ .unthrottle = pty_unthrottle,
+ .set_termios = pty_set_termios,
+ .resize = pty_resize
+};
+
static void __init legacy_pty_init(void)
{
+ struct tty_driver *pty_driver, *pty_slave_driver;
+
if (legacy_count <= 0)
return;
pty_driver->init_termios.c_ospeed = 38400;
pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
pty_driver->other = pty_slave_driver;
- tty_set_operations(pty_driver, &pty_ops);
+ tty_set_operations(pty_driver, &master_pty_ops_bsd);
pty_slave_driver->owner = THIS_MODULE;
pty_slave_driver->driver_name = "pty_slave";
pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
TTY_DRIVER_REAL_RAW;
pty_slave_driver->other = pty_driver;
- tty_set_operations(pty_slave_driver, &pty_ops);
+ tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd);
if (tty_register_driver(pty_driver))
panic("Couldn't register pty driver");
* as an ASCII string in the standard UUID format. If accesses via the
* sysctl system call, it is returned as 16 bytes of binary data.
*/
-static int proc_do_uuid(ctl_table *table, int write, struct file *filp,
+static int proc_do_uuid(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
ctl_table fake_table;
fake_table.data = buf;
fake_table.maxlen = sizeof(buf);
- return proc_dostring(&fake_table, write, filp, buffer, lenp, ppos);
+ return proc_dostring(&fake_table, write, buffer, lenp, ppos);
}
static int uuid_strategy(ctl_table *table,
*/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/tty.h>
*/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <asm/io.h>
/*
** It is important that the product code is an unsigned object!
*/
- if (DownLoad.ProductCode > MAX_PRODUCT) {
+ if (DownLoad.ProductCode >= MAX_PRODUCT) {
rio_dprintk(RIO_DEBUG_CTRL, "RIO_DOWNLOAD: Bad product code %d passed\n", DownLoad.ProductCode);
p->RIOError.Error = NO_SUCH_PRODUCT;
return -ENXIO;
#define __EXPLICIT_DEF_H__
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/tty.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/spinlock.h>
+#include <linux/sched.h>
#include <linux/sysctl.h>
#include <linux/wait.h>
#include <linux/bcd.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/errno.h>
+#include <linux/sched.h>
#include <linux/tty.h>
#include <asm/setup.h>
return 1;
}
- if ((long)info < (long)(&cy_port[0])
- || (long)(&cy_port[NR_PORTS]) < (long)info) {
+ if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) {
printk("Warning: cyclades_port out of range for (%s) in %s\n",
name, routine);
return 1;
panic("TxInt on debug port!!!");
}
#endif
-
- info = &cy_port[channel];
-
/* validate the port number (as configured and open) */
if ((channel < 0) || (NR_PORTS <= channel)) {
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
base_addr[CyTEOIR] = CyNOTRANS;
return IRQ_HANDLED;
}
+ info = &cy_port[channel];
info->last_active = jiffies;
if (info->tty == 0) {
base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
*/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/input.h>
#include <linux/pci.h>
#include <linux/init.h>
/*****************************************************************************/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/kernel.h> /* printk() */
#include <linux/fs.h> /* everything... */
#include <linux/errno.h> /* error codes */
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
cmd.header.in = pcrread_header;
cmd.params.pcrread_in.pcr_idx = cpu_to_be32(pcr_idx);
- BUG_ON(cmd.header.in.length > READ_PCR_RESULT_SIZE);
- rc = transmit_cmd(chip, &cmd, cmd.header.in.length,
+ rc = transmit_cmd(chip, &cmd, READ_PCR_RESULT_SIZE,
"attempting to read a pcr value");
if (rc == 0)
* the module usage count.
*/
#define TPM_ORD_PCR_EXTEND cpu_to_be32(20)
-#define EXTEND_PCR_SIZE 34
+#define EXTEND_PCR_RESULT_SIZE 34
static struct tpm_input_header pcrextend_header = {
.tag = TPM_TAG_RQU_COMMAND,
.length = cpu_to_be32(34),
return -ENODEV;
cmd.header.in = pcrextend_header;
- BUG_ON(be32_to_cpu(cmd.header.in.length) > EXTEND_PCR_SIZE);
cmd.params.pcrextend_in.pcr_idx = cpu_to_be32(pcr_idx);
memcpy(cmd.params.pcrextend_in.hash, hash, TPM_DIGEST_SIZE);
- rc = transmit_cmd(chip, &cmd, cmd.header.in.length,
+ rc = transmit_cmd(chip, &cmd, EXTEND_PCR_RESULT_SIZE,
"attempting extend a PCR value");
module_put(chip->dev->driver->owner);
container_of(work, struct tty_struct, buf.work.work);
unsigned long flags;
struct tty_ldisc *disc;
- struct tty_buffer *tbuf, *head;
- char *char_buf;
- unsigned char *flag_buf;
disc = tty_ldisc_ref(tty);
if (disc == NULL) /* !TTY_LDISC */
return;
spin_lock_irqsave(&tty->buf.lock, flags);
- /* So we know a flush is running */
- set_bit(TTY_FLUSHING, &tty->flags);
- head = tty->buf.head;
- if (head != NULL) {
- tty->buf.head = NULL;
- for (;;) {
- int count = head->commit - head->read;
+
+ if (!test_and_set_bit(TTY_FLUSHING, &tty->flags)) {
+ struct tty_buffer *head;
+ while ((head = tty->buf.head) != NULL) {
+ int count;
+ char *char_buf;
+ unsigned char *flag_buf;
+
+ count = head->commit - head->read;
if (!count) {
if (head->next == NULL)
break;
- tbuf = head;
- head = head->next;
- tty_buffer_free(tty, tbuf);
+ tty->buf.head = head->next;
+ tty_buffer_free(tty, head);
continue;
}
/* Ldisc or user is trying to flush the buffers
flag_buf, count);
spin_lock_irqsave(&tty->buf.lock, flags);
}
- /* Restore the queue head */
- tty->buf.head = head;
+ clear_bit(TTY_FLUSHING, &tty->flags);
}
+
/* We may have a deferred request to flush the input buffer,
if so pull the chain under the lock and empty the queue */
if (test_bit(TTY_FLUSHPENDING, &tty->flags)) {
clear_bit(TTY_FLUSHPENDING, &tty->flags);
wake_up(&tty->read_wait);
}
- clear_bit(TTY_FLUSHING, &tty->flags);
spin_unlock_irqrestore(&tty->buf.lock, flags);
tty_ldisc_deref(disc);
*/
void tty_flush_to_ldisc(struct tty_struct *tty)
{
- flush_to_ldisc(&tty->buf.work.work);
+ flush_delayed_work(&tty->buf.work);
}
/**
* of ttys that the driver keeps.
*
* This method gets called from a work queue so that the driver private
- * shutdown ops can sleep (needed for USB at least)
+ * cleanup ops can sleep (needed for USB at least)
*/
static void release_one_tty(struct work_struct *work)
{
container_of(work, struct tty_struct, hangup_work);
struct tty_driver *driver = tty->driver;
- if (tty->ops->shutdown)
- tty->ops->shutdown(tty);
- else
- tty_shutdown(tty);
+ if (tty->ops->cleanup)
+ tty->ops->cleanup(tty);
+
tty->magic = 0;
tty_driver_kref_put(driver);
module_put(driver->owner);
static void queue_release_one_tty(struct kref *kref)
{
struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+
+ if (tty->ops->shutdown)
+ tty->ops->shutdown(tty);
+ else
+ tty_shutdown(tty);
+
/* The hangup queue is now free so we can reuse it rather than
waste a chunk of memory for each port */
INIT_WORK(&tty->hangup_work, release_one_tty);
static int tty_ldisc_halt(struct tty_struct *tty)
{
clear_bit(TTY_LDISC, &tty->flags);
- return cancel_delayed_work(&tty->buf.work);
+ return cancel_delayed_work_sync(&tty->buf.work);
}
/**
* N_TTY.
*/
if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
- /* Make sure the old ldisc is quiescent */
- tty_ldisc_halt(tty);
- flush_scheduled_work();
-
/* Avoid racing set_ldisc or tty_ldisc_release */
mutex_lock(&tty->ldisc_mutex);
+ tty_ldisc_halt(tty);
if (tty->ldisc) { /* Not yet closed */
/* Switch back to N_TTY */
tty_ldisc_reinit(tty);
--- /dev/null
+/*
+ * Timer device implementation for SGI UV platform.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2009 Silicon Graphics, Inc. All rights reserved.
+ *
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ioctl.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+#include <linux/mmtimer.h>
+#include <linux/miscdevice.h>
+#include <linux/posix-timers.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/math64.h>
+#include <linux/smp_lock.h>
+
+#include <asm/genapic.h>
+#include <asm/uv/uv_hub.h>
+#include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
+
+MODULE_AUTHOR("Dimitri Sivanich <sivanich@sgi.com>");
+MODULE_DESCRIPTION("SGI UV Memory Mapped RTC Timer");
+MODULE_LICENSE("GPL");
+
+/* name of the device, usually in /dev */
+#define UV_MMTIMER_NAME "mmtimer"
+#define UV_MMTIMER_DESC "SGI UV Memory Mapped RTC Timer"
+#define UV_MMTIMER_VERSION "1.0"
+
+static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg);
+static int uv_mmtimer_mmap(struct file *file, struct vm_area_struct *vma);
+
+/*
+ * Period in femtoseconds (10^-15 s)
+ */
+static unsigned long uv_mmtimer_femtoperiod;
+
+static const struct file_operations uv_mmtimer_fops = {
+ .owner = THIS_MODULE,
+ .mmap = uv_mmtimer_mmap,
+ .unlocked_ioctl = uv_mmtimer_ioctl,
+};
+
+/**
+ * uv_mmtimer_ioctl - ioctl interface for /dev/uv_mmtimer
+ * @file: file structure for the device
+ * @cmd: command to execute
+ * @arg: optional argument to command
+ *
+ * Executes the command specified by @cmd. Returns 0 for success, < 0 for
+ * failure.
+ *
+ * Valid commands:
+ *
+ * %MMTIMER_GETOFFSET - Should return the offset (relative to the start
+ * of the page where the registers are mapped) for the counter in question.
+ *
+ * %MMTIMER_GETRES - Returns the resolution of the clock in femto (10^-15)
+ * seconds
+ *
+ * %MMTIMER_GETFREQ - Copies the frequency of the clock in Hz to the address
+ * specified by @arg
+ *
+ * %MMTIMER_GETBITS - Returns the number of bits in the clock's counter
+ *
+ * %MMTIMER_MMAPAVAIL - Returns 1 if registers can be mmap'd into userspace
+ *
+ * %MMTIMER_GETCOUNTER - Gets the current value in the counter and places it
+ * in the address specified by @arg.
+ */
+static long uv_mmtimer_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int ret = 0;
+
+ switch (cmd) {
+ case MMTIMER_GETOFFSET: /* offset of the counter */
+ /*
+ * UV RTC register is on its own page
+ */
+ if (PAGE_SIZE <= (1 << 16))
+ ret = ((UV_LOCAL_MMR_BASE | UVH_RTC) & (PAGE_SIZE-1))
+ / 8;
+ else
+ ret = -ENOSYS;
+ break;
+
+ case MMTIMER_GETRES: /* resolution of the clock in 10^-15 s */
+ if (copy_to_user((unsigned long __user *)arg,
+ &uv_mmtimer_femtoperiod, sizeof(unsigned long)))
+ ret = -EFAULT;
+ break;
+
+ case MMTIMER_GETFREQ: /* frequency in Hz */
+ if (copy_to_user((unsigned long __user *)arg,
+ &sn_rtc_cycles_per_second,
+ sizeof(unsigned long)))
+ ret = -EFAULT;
+ break;
+
+ case MMTIMER_GETBITS: /* number of bits in the clock */
+ ret = hweight64(UVH_RTC_REAL_TIME_CLOCK_MASK);
+ break;
+
+ case MMTIMER_MMAPAVAIL: /* can we mmap the clock into userspace? */
+ ret = (PAGE_SIZE <= (1 << 16)) ? 1 : 0;
+ break;
+
+ case MMTIMER_GETCOUNTER:
+ if (copy_to_user((unsigned long __user *)arg,
+ (unsigned long *)uv_local_mmr_address(UVH_RTC),
+ sizeof(unsigned long)))
+ ret = -EFAULT;
+ break;
+ default:
+ ret = -ENOTTY;
+ break;
+ }
+ return ret;
+}
+
+/**
+ * uv_mmtimer_mmap - maps the clock's registers into userspace
+ * @file: file structure for the device
+ * @vma: VMA to map the registers into
+ *
+ * Calls remap_pfn_range() to map the clock's registers into
+ * the calling process' address space.
+ */
+static int uv_mmtimer_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ unsigned long uv_mmtimer_addr;
+
+ if (vma->vm_end - vma->vm_start != PAGE_SIZE)
+ return -EINVAL;
+
+ if (vma->vm_flags & VM_WRITE)
+ return -EPERM;
+
+ if (PAGE_SIZE > (1 << 16))
+ return -ENOSYS;
+
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ uv_mmtimer_addr = UV_LOCAL_MMR_BASE | UVH_RTC;
+ uv_mmtimer_addr &= ~(PAGE_SIZE - 1);
+ uv_mmtimer_addr &= 0xfffffffffffffffUL;
+
+ if (remap_pfn_range(vma, vma->vm_start, uv_mmtimer_addr >> PAGE_SHIFT,
+ PAGE_SIZE, vma->vm_page_prot)) {
+ printk(KERN_ERR "remap_pfn_range failed in uv_mmtimer_mmap\n");
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+static struct miscdevice uv_mmtimer_miscdev = {
+ MISC_DYNAMIC_MINOR,
+ UV_MMTIMER_NAME,
+ &uv_mmtimer_fops
+};
+
+
+/**
+ * uv_mmtimer_init - device initialization routine
+ *
+ * Does initial setup for the uv_mmtimer device.
+ */
+static int __init uv_mmtimer_init(void)
+{
+ if (!is_uv_system()) {
+ printk(KERN_ERR "%s: Hardware unsupported\n", UV_MMTIMER_NAME);
+ return -1;
+ }
+
+ /*
+ * Sanity check the cycles/sec variable
+ */
+ if (sn_rtc_cycles_per_second < 100000) {
+ printk(KERN_ERR "%s: unable to determine clock frequency\n",
+ UV_MMTIMER_NAME);
+ return -1;
+ }
+
+ uv_mmtimer_femtoperiod = ((unsigned long)1E15 +
+ sn_rtc_cycles_per_second / 2) /
+ sn_rtc_cycles_per_second;
+
+ if (misc_register(&uv_mmtimer_miscdev)) {
+ printk(KERN_ERR "%s: failed to register device\n",
+ UV_MMTIMER_NAME);
+ return -1;
+ }
+
+ printk(KERN_INFO "%s: v%s, %ld MHz\n", UV_MMTIMER_DESC,
+ UV_MMTIMER_VERSION,
+ sn_rtc_cycles_per_second/(unsigned long)1E6);
+
+ return 0;
+}
+
+module_init(uv_mmtimer_init);
#include <linux/err.h>
#include <linux/init.h>
#include <linux/virtio.h>
-#include <linux/virtio_ids.h>
#include <linux/virtio_console.h>
#include "hvc_console.h"
goto eperm;
if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg,
- sizeof(struct vt_setactivate)))
- return -EFAULT;
+ sizeof(struct vt_setactivate))) {
+ ret = -EFAULT;
+ goto out;
+ }
if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
ret = -ENXIO;
else {
case PIO_UNIMAP:
case GIO_UNIMAP:
- ret = do_unimap_ioctl(cmd, up, perm, vc);
+ ret = compat_unimap_ioctl(cmd, up, perm, vc);
break;
/*
return status;
}
-static struct file_operations hwicap_fops = {
+static const struct file_operations hwicap_fops = {
.owner = THIS_MODULE,
.write = hwicap_write,
.read = hwicap_read,
* cn_proc_mcast_ctl
* @data: message sent from userspace via the connector
*/
-static void cn_proc_mcast_ctl(struct cn_msg *msg)
+static void cn_proc_mcast_ctl(struct cn_msg *msg,
+ struct netlink_skb_parms *nsp)
{
enum proc_cn_mcast_op *mc_op = NULL;
int err = 0;
struct cn_callback_entry *cbq =
container_of(work, struct cn_callback_entry, work);
struct cn_callback_data *d = &cbq->data;
+ struct cn_msg *msg = NLMSG_DATA(nlmsg_hdr(d->skb));
+ struct netlink_skb_parms *nsp = &NETLINK_CB(d->skb);
- d->callback(d->callback_priv);
+ d->callback(msg, nsp);
- d->destruct_data(d->ddata);
- d->ddata = NULL;
+ kfree_skb(d->skb);
+ d->skb = NULL;
kfree(d->free);
}
static struct cn_callback_entry *
cn_queue_alloc_callback_entry(char *name, struct cb_id *id,
- void (*callback)(struct cn_msg *))
+ void (*callback)(struct cn_msg *, struct netlink_skb_parms *))
{
struct cn_callback_entry *cbq;
}
int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id,
- void (*callback)(struct cn_msg *))
+ void (*callback)(struct cn_msg *, struct netlink_skb_parms *))
{
struct cn_callback_entry *cbq, *__cbq;
int found = 0;
/*
* Callback helper - queues work and setup destructor for given data.
*/
-static int cn_call_callback(struct cn_msg *msg, void (*destruct_data)(void *), void *data)
+static int cn_call_callback(struct sk_buff *skb)
{
struct cn_callback_entry *__cbq, *__new_cbq;
struct cn_dev *dev = &cdev;
+ struct cn_msg *msg = NLMSG_DATA(nlmsg_hdr(skb));
int err = -ENODEV;
spin_lock_bh(&dev->cbdev->queue_lock);
list_for_each_entry(__cbq, &dev->cbdev->queue_list, callback_entry) {
if (cn_cb_equal(&__cbq->id.id, &msg->id)) {
if (likely(!work_pending(&__cbq->work) &&
- __cbq->data.ddata == NULL)) {
- __cbq->data.callback_priv = msg;
-
- __cbq->data.ddata = data;
- __cbq->data.destruct_data = destruct_data;
+ __cbq->data.skb == NULL)) {
+ __cbq->data.skb = skb;
if (queue_cn_work(__cbq, &__cbq->work))
err = 0;
__new_cbq = kzalloc(sizeof(struct cn_callback_entry), GFP_ATOMIC);
if (__new_cbq) {
d = &__new_cbq->data;
- d->callback_priv = msg;
+ d->skb = skb;
d->callback = __cbq->data.callback;
- d->ddata = data;
- d->destruct_data = destruct_data;
d->free = __new_cbq;
__new_cbq->pdev = __cbq->pdev;
*/
static void cn_rx_skb(struct sk_buff *__skb)
{
- struct cn_msg *msg;
struct nlmsghdr *nlh;
int err;
struct sk_buff *skb;
return;
}
- msg = NLMSG_DATA(nlh);
- err = cn_call_callback(msg, (void (*)(void *))kfree_skb, skb);
+ err = cn_call_callback(skb);
if (err < 0)
kfree_skb(skb);
}
* May sleep.
*/
int cn_add_callback(struct cb_id *id, char *name,
- void (*callback)(struct cn_msg *))
+ void (*callback)(struct cn_msg *, struct netlink_skb_parms *))
{
int err;
struct cn_dev *dev = &cdev;
*
* Used for notification of a request's processing.
*/
-static void cn_callback(struct cn_msg *msg)
+static void cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
struct cn_ctl_msg *ctl;
struct cn_ctl_entry *ent;
#endif
/* ask the governor for the next state */
next_state = cpuidle_curr_governor->select(dev);
- if (need_resched())
+ if (need_resched()) {
+ local_irq_enable();
return;
+ }
+
target_state = &dev->states[next_state];
/* enter the state and update stats */
#include <asm/i387.h>
#include "padlock.h"
+#ifdef CONFIG_64BIT
+#define STACK_ALIGN 16
+#else
+#define STACK_ALIGN 4
+#endif
+
struct padlock_sha_desc {
struct shash_desc fallback;
};
/* We can't store directly to *out as it may be unaligned. */
/* BTW Don't reduce the buffer size below 128 Bytes!
* PadLock microcode needs it that big. */
- char result[128] __attribute__ ((aligned(PADLOCK_ALIGNMENT)));
+ char buf[128 + PADLOCK_ALIGNMENT - STACK_ALIGN] __attribute__
+ ((aligned(STACK_ALIGN)));
+ char *result = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
struct sha1_state state;
unsigned int space;
/* We can't store directly to *out as it may be unaligned. */
/* BTW Don't reduce the buffer size below 128 Bytes!
* PadLock microcode needs it that big. */
- char result[128] __attribute__ ((aligned(PADLOCK_ALIGNMENT)));
+ char buf[128 + PADLOCK_ALIGNMENT - STACK_ALIGN] __attribute__
+ ((aligned(STACK_ALIGN)));
+ char *result = PTR_ALIGN(&buf[0], PADLOCK_ALIGNMENT);
struct padlock_sha_desc *dctx = shash_desc_ctx(desc);
struct sha256_state state;
unsigned int space;
#include <linux/device.h>
#include <linux/dca.h>
-#define DCA_VERSION "1.8"
+#define DCA_VERSION "1.12.1"
MODULE_VERSION(DCA_VERSION);
MODULE_LICENSE("GPL");
static DEFINE_SPINLOCK(dca_lock);
-static LIST_HEAD(dca_providers);
+static LIST_HEAD(dca_domains);
-static struct dca_provider *dca_find_provider_by_dev(struct device *dev)
+static struct pci_bus *dca_pci_rc_from_dev(struct device *dev)
{
- struct dca_provider *dca, *ret = NULL;
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct pci_bus *bus = pdev->bus;
- list_for_each_entry(dca, &dca_providers, node) {
- if ((!dev) || (dca->ops->dev_managed(dca, dev))) {
- ret = dca;
- break;
- }
+ while (bus->parent)
+ bus = bus->parent;
+
+ return bus;
+}
+
+static struct dca_domain *dca_allocate_domain(struct pci_bus *rc)
+{
+ struct dca_domain *domain;
+
+ domain = kzalloc(sizeof(*domain), GFP_NOWAIT);
+ if (!domain)
+ return NULL;
+
+ INIT_LIST_HEAD(&domain->dca_providers);
+ domain->pci_rc = rc;
+
+ return domain;
+}
+
+static void dca_free_domain(struct dca_domain *domain)
+{
+ list_del(&domain->node);
+ kfree(domain);
+}
+
+static struct dca_domain *dca_find_domain(struct pci_bus *rc)
+{
+ struct dca_domain *domain;
+
+ list_for_each_entry(domain, &dca_domains, node)
+ if (domain->pci_rc == rc)
+ return domain;
+
+ return NULL;
+}
+
+static struct dca_domain *dca_get_domain(struct device *dev)
+{
+ struct pci_bus *rc;
+ struct dca_domain *domain;
+
+ rc = dca_pci_rc_from_dev(dev);
+ domain = dca_find_domain(rc);
+
+ if (!domain) {
+ domain = dca_allocate_domain(rc);
+ if (domain)
+ list_add(&domain->node, &dca_domains);
+ }
+
+ return domain;
+}
+
+static struct dca_provider *dca_find_provider_by_dev(struct device *dev)
+{
+ struct dca_provider *dca;
+ struct pci_bus *rc;
+ struct dca_domain *domain;
+
+ if (dev) {
+ rc = dca_pci_rc_from_dev(dev);
+ domain = dca_find_domain(rc);
+ if (!domain)
+ return NULL;
+ } else {
+ if (!list_empty(&dca_domains))
+ domain = list_first_entry(&dca_domains,
+ struct dca_domain,
+ node);
+ else
+ return NULL;
}
- return ret;
+ list_for_each_entry(dca, &domain->dca_providers, node)
+ if ((!dev) || (dca->ops->dev_managed(dca, dev)))
+ return dca;
+
+ return NULL;
}
/**
struct dca_provider *dca;
int err, slot = -ENODEV;
unsigned long flags;
+ struct pci_bus *pci_rc;
+ struct dca_domain *domain;
if (!dev)
return -EFAULT;
return -EEXIST;
}
- list_for_each_entry(dca, &dca_providers, node) {
+ pci_rc = dca_pci_rc_from_dev(dev);
+ domain = dca_find_domain(pci_rc);
+ if (!domain) {
+ spin_unlock_irqrestore(&dca_lock, flags);
+ return -ENODEV;
+ }
+
+ list_for_each_entry(dca, &domain->dca_providers, node) {
slot = dca->ops->add_requester(dca, dev);
if (slot >= 0)
break;
{
int err;
unsigned long flags;
+ struct dca_domain *domain;
err = dca_sysfs_add_provider(dca, dev);
if (err)
return err;
spin_lock_irqsave(&dca_lock, flags);
- list_add(&dca->node, &dca_providers);
+ domain = dca_get_domain(dev);
+ if (!domain) {
+ spin_unlock_irqrestore(&dca_lock, flags);
+ return -ENODEV;
+ }
+ list_add(&dca->node, &domain->dca_providers);
spin_unlock_irqrestore(&dca_lock, flags);
blocking_notifier_call_chain(&dca_provider_chain,
* unregister_dca_provider - remove a dca provider
* @dca - struct created by alloc_dca_provider()
*/
-void unregister_dca_provider(struct dca_provider *dca)
+void unregister_dca_provider(struct dca_provider *dca, struct device *dev)
{
unsigned long flags;
+ struct pci_bus *pci_rc;
+ struct dca_domain *domain;
blocking_notifier_call_chain(&dca_provider_chain,
DCA_PROVIDER_REMOVE, NULL);
spin_lock_irqsave(&dca_lock, flags);
+
list_del(&dca->node);
+
+ pci_rc = dca_pci_rc_from_dev(dev);
+ domain = dca_find_domain(pci_rc);
+ if (list_empty(&domain->dca_providers))
+ dca_free_domain(domain);
+
spin_unlock_irqrestore(&dca_lock, flags);
dca_sysfs_remove_provider(dca);
static int __init dca_init(void)
{
- printk(KERN_ERR "dca service started, version %s\n", DCA_VERSION);
+ pr_info("dca service started, version %s\n", DCA_VERSION);
return dca_sysfs_init();
}
comment "DMA Devices"
+config ASYNC_TX_DISABLE_CHANNEL_SWITCH
+ bool
+
config INTEL_IOATDMA
tristate "Intel I/OAT DMA support"
depends on PCI && X86
select DMA_ENGINE
select DCA
+ select ASYNC_TX_DISABLE_CHANNEL_SWITCH
help
Enable support for the Intel(R) I/OAT DMA engine present
in recent Intel Xeon chipsets.
Support the TXx9 SoC internal DMA controller. This can be
integrated in chips such as the Toshiba TX4927/38/39.
+config SH_DMAE
+ tristate "Renesas SuperH DMAC support"
+ depends on SUPERH && SH_DMA
+ depends on !SH_DMA_API
+ select DMA_ENGINE
+ help
+ Enable support for the Renesas SuperH DMA controllers.
+
config DMA_ENGINE
bool
config ASYNC_TX_DMA
bool "Async_tx: Offload support for the async_tx api"
- depends on DMA_ENGINE && !HIGHMEM64G
+ depends on DMA_ENGINE
help
This allows the async_tx api to take advantage of offload engines for
memcpy, memset, xor, and raid6 p+q operations. If your platform has
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
obj-$(CONFIG_NET_DMA) += iovlock.o
obj-$(CONFIG_DMATEST) += dmatest.o
-obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
-ioatdma-objs := ioat.o ioat_dma.o ioat_dca.o
+obj-$(CONFIG_INTEL_IOATDMA) += ioat/
obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
+obj-$(CONFIG_SH_DMAE) += shdma.o
desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys);
if (desc) {
memset(desc, 0, sizeof(struct at_desc));
+ INIT_LIST_HEAD(&desc->tx_list);
dma_async_tx_descriptor_init(&desc->txd, chan);
/* txd.flags will be overwritten in prep functions */
desc->txd.flags = DMA_CTRL_ACK;
struct at_desc *child;
spin_lock_bh(&atchan->lock);
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dev_vdbg(chan2dev(&atchan->chan_common),
"moving child desc %p to freelist\n",
child);
- list_splice_init(&desc->txd.tx_list, &atchan->free_list);
+ list_splice_init(&desc->tx_list, &atchan->free_list);
dev_vdbg(chan2dev(&atchan->chan_common),
"moving desc %p to freelist\n", desc);
list_add(&desc->desc_node, &atchan->free_list);
param = txd->callback_param;
/* move children to free_list */
- list_splice_init(&txd->tx_list, &atchan->free_list);
+ list_splice_init(&desc->tx_list, &atchan->free_list);
/* move myself to free_list */
list_move(&desc->desc_node, &atchan->free_list);
/* unmap dma addresses */
- if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
- dma_unmap_single(chan2parent(&atchan->chan_common),
- desc->lli.daddr,
- desc->len, DMA_FROM_DEVICE);
- else
- dma_unmap_page(chan2parent(&atchan->chan_common),
- desc->lli.daddr,
- desc->len, DMA_FROM_DEVICE);
- }
- if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
- dma_unmap_single(chan2parent(&atchan->chan_common),
- desc->lli.saddr,
- desc->len, DMA_TO_DEVICE);
- else
- dma_unmap_page(chan2parent(&atchan->chan_common),
- desc->lli.saddr,
- desc->len, DMA_TO_DEVICE);
+ if (!atchan->chan_common.private) {
+ struct device *parent = chan2parent(&atchan->chan_common);
+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(parent,
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(parent,
+ desc->lli.daddr,
+ desc->len, DMA_FROM_DEVICE);
+ }
+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(parent,
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(parent,
+ desc->lli.saddr,
+ desc->len, DMA_TO_DEVICE);
+ }
}
/*
/* This one is currently in progress */
return;
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
if (!(child->lli.ctrla & ATC_DONE))
/* Currently in progress */
return;
dev_crit(chan2dev(&atchan->chan_common),
" cookie: %d\n", bad_desc->txd.cookie);
atc_dump_lli(atchan, &bad_desc->lli);
- list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &bad_desc->tx_list, desc_node)
atc_dump_lli(atchan, &child->lli);
/* Pretend the descriptor completed successfully */
prev->lli.dscr = desc->txd.phys;
/* insert the link descriptor to the LD ring */
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
}
reg_width = atslave->reg_width;
- sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
-
ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla;
ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN;
prev->lli.dscr = desc->txd.phys;
/* insert the link descriptor to the LD ring */
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
total_len += len;
prev->lli.dscr = desc->txd.phys;
/* insert the link descriptor to the LD ring */
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
total_len += len;
struct at_lli lli;
/* THEN values for driver housekeeping */
+ struct list_head tx_list;
struct dma_async_tx_descriptor txd;
struct list_head desc_node;
size_t len;
}
EXPORT_SYMBOL(dmaengine_put);
+static bool device_has_all_tx_types(struct dma_device *device)
+{
+ /* A device that satisfies this test has channels that will never cause
+ * an async_tx channel switch event as all possible operation types can
+ * be handled.
+ */
+ #ifdef CONFIG_ASYNC_TX_DMA
+ if (!dma_has_cap(DMA_INTERRUPT, device->cap_mask))
+ return false;
+ #endif
+
+ #if defined(CONFIG_ASYNC_MEMCPY) || defined(CONFIG_ASYNC_MEMCPY_MODULE)
+ if (!dma_has_cap(DMA_MEMCPY, device->cap_mask))
+ return false;
+ #endif
+
+ #if defined(CONFIG_ASYNC_MEMSET) || defined(CONFIG_ASYNC_MEMSET_MODULE)
+ if (!dma_has_cap(DMA_MEMSET, device->cap_mask))
+ return false;
+ #endif
+
+ #if defined(CONFIG_ASYNC_XOR) || defined(CONFIG_ASYNC_XOR_MODULE)
+ if (!dma_has_cap(DMA_XOR, device->cap_mask))
+ return false;
+ #endif
+
+ #if defined(CONFIG_ASYNC_PQ) || defined(CONFIG_ASYNC_PQ_MODULE)
+ if (!dma_has_cap(DMA_PQ, device->cap_mask))
+ return false;
+ #endif
+
+ return true;
+}
+
static int get_dma_id(struct dma_device *device)
{
int rc;
!device->device_prep_dma_memcpy);
BUG_ON(dma_has_cap(DMA_XOR, device->cap_mask) &&
!device->device_prep_dma_xor);
- BUG_ON(dma_has_cap(DMA_ZERO_SUM, device->cap_mask) &&
- !device->device_prep_dma_zero_sum);
+ BUG_ON(dma_has_cap(DMA_XOR_VAL, device->cap_mask) &&
+ !device->device_prep_dma_xor_val);
+ BUG_ON(dma_has_cap(DMA_PQ, device->cap_mask) &&
+ !device->device_prep_dma_pq);
+ BUG_ON(dma_has_cap(DMA_PQ_VAL, device->cap_mask) &&
+ !device->device_prep_dma_pq_val);
BUG_ON(dma_has_cap(DMA_MEMSET, device->cap_mask) &&
!device->device_prep_dma_memset);
BUG_ON(dma_has_cap(DMA_INTERRUPT, device->cap_mask) &&
BUG_ON(!device->device_issue_pending);
BUG_ON(!device->dev);
+ /* note: this only matters in the
+ * CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y case
+ */
+ if (device_has_all_tx_types(device))
+ dma_cap_set(DMA_ASYNC_TX, device->cap_mask);
+
idr_ref = kmalloc(sizeof(*idr_ref), GFP_KERNEL);
if (!idr_ref)
return -ENOMEM;
{
tx->chan = chan;
spin_lock_init(&tx->lock);
- INIT_LIST_HEAD(&tx->tx_list);
}
EXPORT_SYMBOL(dma_async_tx_descriptor_init);
/* dma_wait_for_async_tx - spin wait for a transaction to complete
* @tx: in-flight transaction to wait on
- *
- * This routine assumes that tx was obtained from a call to async_memcpy,
- * async_xor, async_memset, etc which ensures that tx is "in-flight" (prepped
- * and submitted). Walking the parent chain is only meant to cover for DMA
- * drivers that do not implement the DMA_INTERRUPT capability and may race with
- * the driver's descriptor cleanup routine.
*/
enum dma_status
dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx)
{
- enum dma_status status;
- struct dma_async_tx_descriptor *iter;
- struct dma_async_tx_descriptor *parent;
+ unsigned long dma_sync_wait_timeout = jiffies + msecs_to_jiffies(5000);
if (!tx)
return DMA_SUCCESS;
- WARN_ONCE(tx->parent, "%s: speculatively walking dependency chain for"
- " %s\n", __func__, dma_chan_name(tx->chan));
-
- /* poll through the dependency chain, return when tx is complete */
- do {
- iter = tx;
-
- /* find the root of the unsubmitted dependency chain */
- do {
- parent = iter->parent;
- if (!parent)
- break;
- else
- iter = parent;
- } while (parent);
-
- /* there is a small window for ->parent == NULL and
- * ->cookie == -EBUSY
- */
- while (iter->cookie == -EBUSY)
- cpu_relax();
-
- status = dma_sync_wait(iter->chan, iter->cookie);
- } while (status == DMA_IN_PROGRESS || (iter != tx));
-
- return status;
+ while (tx->cookie == -EBUSY) {
+ if (time_after_eq(jiffies, dma_sync_wait_timeout)) {
+ pr_err("%s timeout waiting for descriptor submission\n",
+ __func__);
+ return DMA_ERROR;
+ }
+ cpu_relax();
+ }
+ return dma_sync_wait(tx->chan, tx->cookie);
}
EXPORT_SYMBOL_GPL(dma_wait_for_async_tx);
MODULE_PARM_DESC(xor_sources,
"Number of xor source buffers (default: 3)");
+static unsigned int pq_sources = 3;
+module_param(pq_sources, uint, S_IRUGO);
+MODULE_PARM_DESC(pq_sources,
+ "Number of p+q source buffers (default: 3)");
+
/*
* Initialization patterns. All bytes in the source buffer has bit 7
* set, all bytes in the destination buffer has bit 7 cleared.
dma_cookie_t cookie;
enum dma_status status;
enum dma_ctrl_flags flags;
+ u8 pq_coefs[pq_sources];
int ret;
int src_cnt;
int dst_cnt;
else if (thread->type == DMA_XOR) {
src_cnt = xor_sources | 1; /* force odd to ensure dst = src */
dst_cnt = 1;
+ } else if (thread->type == DMA_PQ) {
+ src_cnt = pq_sources | 1; /* force odd to ensure dst = src */
+ dst_cnt = 2;
+ for (i = 0; i < pq_sources; i++)
+ pq_coefs[i] = 1;
} else
goto err_srcs;
dma_addr_t dma_dsts[dst_cnt];
struct completion cmp;
unsigned long tmo = msecs_to_jiffies(3000);
+ u8 align = 0;
total_tests++;
src_off = dmatest_random() % (test_buf_size - len + 1);
dst_off = dmatest_random() % (test_buf_size - len + 1);
+ /* honor alignment restrictions */
+ if (thread->type == DMA_MEMCPY)
+ align = dev->copy_align;
+ else if (thread->type == DMA_XOR)
+ align = dev->xor_align;
+ else if (thread->type == DMA_PQ)
+ align = dev->pq_align;
+
+ len = (len >> align) << align;
+ src_off = (src_off >> align) << align;
+ dst_off = (dst_off >> align) << align;
+
dmatest_init_srcs(thread->srcs, src_off, len);
dmatest_init_dsts(thread->dsts, dst_off, len);
DMA_BIDIRECTIONAL);
}
+
if (thread->type == DMA_MEMCPY)
tx = dev->device_prep_dma_memcpy(chan,
dma_dsts[0] + dst_off,
dma_dsts[0] + dst_off,
dma_srcs, xor_sources,
len, flags);
+ else if (thread->type == DMA_PQ) {
+ dma_addr_t dma_pq[dst_cnt];
+
+ for (i = 0; i < dst_cnt; i++)
+ dma_pq[i] = dma_dsts[i] + dst_off;
+ tx = dev->device_prep_dma_pq(chan, dma_pq, dma_srcs,
+ pq_sources, pq_coefs,
+ len, flags);
+ }
if (!tx) {
for (i = 0; i < src_cnt; i++)
op = "copy";
else if (type == DMA_XOR)
op = "xor";
+ else if (type == DMA_PQ)
+ op = "pq";
else
return -EINVAL;
cnt = dmatest_add_threads(dtc, DMA_XOR);
thread_count += cnt > 0 ? cnt : 0;
}
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
+ cnt = dmatest_add_threads(dtc, DMA_PQ);
+ thread_count += cnt > 0 ?: 0;
+ }
pr_info("dmatest: Started %u threads using %s\n",
thread_count, dma_chan_name(chan));
{
struct dw_desc *child;
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dma_sync_single_for_cpu(chan2parent(&dwc->chan),
child->txd.phys, sizeof(child->lli),
DMA_TO_DEVICE);
dwc_sync_desc_for_cpu(dwc, desc);
spin_lock_bh(&dwc->lock);
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dev_vdbg(chan2dev(&dwc->chan),
"moving child desc %p to freelist\n",
child);
- list_splice_init(&desc->txd.tx_list, &dwc->free_list);
+ list_splice_init(&desc->tx_list, &dwc->free_list);
dev_vdbg(chan2dev(&dwc->chan), "moving desc %p to freelist\n", desc);
list_add(&desc->desc_node, &dwc->free_list);
spin_unlock_bh(&dwc->lock);
param = txd->callback_param;
dwc_sync_desc_for_cpu(dwc, desc);
- list_splice_init(&txd->tx_list, &dwc->free_list);
+ list_splice_init(&desc->tx_list, &dwc->free_list);
list_move(&desc->desc_node, &dwc->free_list);
- /*
- * We use dma_unmap_page() regardless of how the buffers were
- * mapped before they were submitted...
- */
- if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP))
- dma_unmap_page(chan2parent(&dwc->chan), desc->lli.dar,
- desc->len, DMA_FROM_DEVICE);
- if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP))
- dma_unmap_page(chan2parent(&dwc->chan), desc->lli.sar,
- desc->len, DMA_TO_DEVICE);
+ if (!dwc->chan.private) {
+ struct device *parent = chan2parent(&dwc->chan);
+ if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ dma_unmap_single(parent, desc->lli.dar,
+ desc->len, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(parent, desc->lli.dar,
+ desc->len, DMA_FROM_DEVICE);
+ }
+ if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ dma_unmap_single(parent, desc->lli.sar,
+ desc->len, DMA_TO_DEVICE);
+ else
+ dma_unmap_page(parent, desc->lli.sar,
+ desc->len, DMA_TO_DEVICE);
+ }
+ }
/*
* The API requires that no submissions are done from a
/* This one is currently in progress */
return;
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
if (child->lli.llp == llp)
/* Currently in progress */
return;
dev_printk(KERN_CRIT, chan2dev(&dwc->chan),
" cookie: %d\n", bad_desc->txd.cookie);
dwc_dump_lli(dwc, &bad_desc->lli);
- list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &bad_desc->tx_list, desc_node)
dwc_dump_lli(dwc, &child->lli);
/* Pretend the descriptor completed successfully */
prev->txd.phys, sizeof(prev->lli),
DMA_TO_DEVICE);
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
}
reg_width = dws->reg_width;
prev = first = NULL;
- sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
-
switch (direction) {
case DMA_TO_DEVICE:
ctllo = (DWC_DEFAULT_CTLLO
sizeof(prev->lli),
DMA_TO_DEVICE);
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
total_len += len;
sizeof(prev->lli),
DMA_TO_DEVICE);
list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ &first->tx_list);
}
prev = desc;
total_len += len;
break;
}
+ INIT_LIST_HEAD(&desc->tx_list);
dma_async_tx_descriptor_init(&desc->txd, chan);
desc->txd.tx_submit = dwc_tx_submit;
desc->txd.flags = DMA_CTRL_ACK;
/* THEN values for driver housekeeping */
struct list_head desc_node;
+ struct list_head tx_list;
struct dma_async_tx_descriptor txd;
size_t len;
};
#include <linux/dmapool.h>
#include <linux/of_platform.h>
+#include <asm/fsldma.h>
#include "fsldma.h"
static void dma_init(struct fsl_dma_chan *fsl_chan)
}
/**
- * fsl_chan_toggle_ext_pause - Toggle channel external pause status
+ * fsl_chan_set_request_count - Set DMA Request Count for external control
* @fsl_chan : Freescale DMA channel
- * @size : Pause control size, 0 for disable external pause control.
- * The maximum is 1024.
+ * @size : Number of bytes to transfer in a single request
+ *
+ * The Freescale DMA channel can be controlled by the external signal DREQ#.
+ * The DMA request count is how many bytes are allowed to transfer before
+ * pausing the channel, after which a new assertion of DREQ# resumes channel
+ * operation.
*
- * The Freescale DMA channel can be controlled by the external
- * signal DREQ#. The pause control size is how many bytes are allowed
- * to transfer before pausing the channel, after which a new assertion
- * of DREQ# resumes channel operation.
+ * A size of 0 disables external pause control. The maximum size is 1024.
*/
-static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int size)
+static void fsl_chan_set_request_count(struct fsl_dma_chan *fsl_chan, int size)
{
- if (size > 1024)
- return;
+ BUG_ON(size > 1024);
+ DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
+ DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
+ | ((__ilog2(size) << 24) & 0x0f000000),
+ 32);
+}
- if (size) {
- DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
- DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
- | ((__ilog2(size) << 24) & 0x0f000000),
- 32);
+/**
+ * fsl_chan_toggle_ext_pause - Toggle channel external pause status
+ * @fsl_chan : Freescale DMA channel
+ * @enable : 0 is disabled, 1 is enabled.
+ *
+ * The Freescale DMA channel can be controlled by the external signal DREQ#.
+ * The DMA Request Count feature should be used in addition to this feature
+ * to set the number of bytes to transfer before pausing the channel.
+ */
+static void fsl_chan_toggle_ext_pause(struct fsl_dma_chan *fsl_chan, int enable)
+{
+ if (enable)
fsl_chan->feature |= FSL_DMA_CHAN_PAUSE_EXT;
- } else
+ else
fsl_chan->feature &= ~FSL_DMA_CHAN_PAUSE_EXT;
}
static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
- struct fsl_desc_sw *desc;
+ struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
+ struct fsl_desc_sw *child;
unsigned long flags;
dma_cookie_t cookie;
spin_lock_irqsave(&fsl_chan->desc_lock, flags);
cookie = fsl_chan->common.cookie;
- list_for_each_entry(desc, &tx->tx_list, node) {
+ list_for_each_entry(child, &desc->tx_list, node) {
cookie++;
if (cookie < 0)
cookie = 1;
}
fsl_chan->common.cookie = cookie;
- append_ld_queue(fsl_chan, tx_to_fsl_desc(tx));
- list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev);
+ append_ld_queue(fsl_chan, desc);
+ list_splice_init(&desc->tx_list, fsl_chan->ld_queue.prev);
spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
desc_sw = dma_pool_alloc(fsl_chan->desc_pool, GFP_ATOMIC, &pdesc);
if (desc_sw) {
memset(desc_sw, 0, sizeof(struct fsl_desc_sw));
+ INIT_LIST_HEAD(&desc_sw->tx_list);
dma_async_tx_descriptor_init(&desc_sw->async_tx,
&fsl_chan->common);
desc_sw->async_tx.tx_submit = fsl_dma_tx_submit;
new->async_tx.flags = flags;
/* Insert the link descriptor to the LD ring */
- list_add_tail(&new->node, &new->async_tx.tx_list);
+ list_add_tail(&new->node, &new->tx_list);
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
dma_dest += copy;
/* Insert the link descriptor to the LD ring */
- list_add_tail(&new->node, &first->async_tx.tx_list);
+ list_add_tail(&new->node, &first->tx_list);
} while (len);
new->async_tx.flags = flags; /* client is in control of this ack */
if (!first)
return NULL;
- list = &first->async_tx.tx_list;
+ list = &first->tx_list;
list_for_each_entry_safe_reverse(new, prev, list, node) {
list_del(&new->node);
dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
return NULL;
}
+/**
+ * fsl_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: DMAEngine flags
+ *
+ * Prepare a set of descriptors for a DMA_SLAVE transaction. Following the
+ * DMA_SLAVE API, this gets the device-specific information from the
+ * chan->private variable.
+ */
+static struct dma_async_tx_descriptor *fsl_dma_prep_slave_sg(
+ struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len,
+ enum dma_data_direction direction, unsigned long flags)
+{
+ struct fsl_dma_chan *fsl_chan;
+ struct fsl_desc_sw *first = NULL, *prev = NULL, *new = NULL;
+ struct fsl_dma_slave *slave;
+ struct list_head *tx_list;
+ size_t copy;
+
+ int i;
+ struct scatterlist *sg;
+ size_t sg_used;
+ size_t hw_used;
+ struct fsl_dma_hw_addr *hw;
+ dma_addr_t dma_dst, dma_src;
+
+ if (!chan)
+ return NULL;
+
+ if (!chan->private)
+ return NULL;
+
+ fsl_chan = to_fsl_chan(chan);
+ slave = chan->private;
+
+ if (list_empty(&slave->addresses))
+ return NULL;
+
+ hw = list_first_entry(&slave->addresses, struct fsl_dma_hw_addr, entry);
+ hw_used = 0;
+
+ /*
+ * Build the hardware transaction to copy from the scatterlist to
+ * the hardware, or from the hardware to the scatterlist
+ *
+ * If you are copying from the hardware to the scatterlist and it
+ * takes two hardware entries to fill an entire page, then both
+ * hardware entries will be coalesced into the same page
+ *
+ * If you are copying from the scatterlist to the hardware and a
+ * single page can fill two hardware entries, then the data will
+ * be read out of the page into the first hardware entry, and so on
+ */
+ for_each_sg(sgl, sg, sg_len, i) {
+ sg_used = 0;
+
+ /* Loop until the entire scatterlist entry is used */
+ while (sg_used < sg_dma_len(sg)) {
+
+ /*
+ * If we've used up the current hardware address/length
+ * pair, we need to load a new one
+ *
+ * This is done in a while loop so that descriptors with
+ * length == 0 will be skipped
+ */
+ while (hw_used >= hw->length) {
+
+ /*
+ * If the current hardware entry is the last
+ * entry in the list, we're finished
+ */
+ if (list_is_last(&hw->entry, &slave->addresses))
+ goto finished;
+
+ /* Get the next hardware address/length pair */
+ hw = list_entry(hw->entry.next,
+ struct fsl_dma_hw_addr, entry);
+ hw_used = 0;
+ }
+
+ /* Allocate the link descriptor from DMA pool */
+ new = fsl_dma_alloc_descriptor(fsl_chan);
+ if (!new) {
+ dev_err(fsl_chan->dev, "No free memory for "
+ "link descriptor\n");
+ goto fail;
+ }
+#ifdef FSL_DMA_LD_DEBUG
+ dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
+#endif
+
+ /*
+ * Calculate the maximum number of bytes to transfer,
+ * making sure it is less than the DMA controller limit
+ */
+ copy = min_t(size_t, sg_dma_len(sg) - sg_used,
+ hw->length - hw_used);
+ copy = min_t(size_t, copy, FSL_DMA_BCR_MAX_CNT);
+
+ /*
+ * DMA_FROM_DEVICE
+ * from the hardware to the scatterlist
+ *
+ * DMA_TO_DEVICE
+ * from the scatterlist to the hardware
+ */
+ if (direction == DMA_FROM_DEVICE) {
+ dma_src = hw->address + hw_used;
+ dma_dst = sg_dma_address(sg) + sg_used;
+ } else {
+ dma_src = sg_dma_address(sg) + sg_used;
+ dma_dst = hw->address + hw_used;
+ }
+
+ /* Fill in the descriptor */
+ set_desc_cnt(fsl_chan, &new->hw, copy);
+ set_desc_src(fsl_chan, &new->hw, dma_src);
+ set_desc_dest(fsl_chan, &new->hw, dma_dst);
+
+ /*
+ * If this is not the first descriptor, chain the
+ * current descriptor after the previous descriptor
+ */
+ if (!first) {
+ first = new;
+ } else {
+ set_desc_next(fsl_chan, &prev->hw,
+ new->async_tx.phys);
+ }
+
+ new->async_tx.cookie = 0;
+ async_tx_ack(&new->async_tx);
+
+ prev = new;
+ sg_used += copy;
+ hw_used += copy;
+
+ /* Insert the link descriptor into the LD ring */
+ list_add_tail(&new->node, &first->tx_list);
+ }
+ }
+
+finished:
+
+ /* All of the hardware address/length pairs had length == 0 */
+ if (!first || !new)
+ return NULL;
+
+ new->async_tx.flags = flags;
+ new->async_tx.cookie = -EBUSY;
+
+ /* Set End-of-link to the last link descriptor of new list */
+ set_ld_eol(fsl_chan, new);
+
+ /* Enable extra controller features */
+ if (fsl_chan->set_src_loop_size)
+ fsl_chan->set_src_loop_size(fsl_chan, slave->src_loop_size);
+
+ if (fsl_chan->set_dest_loop_size)
+ fsl_chan->set_dest_loop_size(fsl_chan, slave->dst_loop_size);
+
+ if (fsl_chan->toggle_ext_start)
+ fsl_chan->toggle_ext_start(fsl_chan, slave->external_start);
+
+ if (fsl_chan->toggle_ext_pause)
+ fsl_chan->toggle_ext_pause(fsl_chan, slave->external_pause);
+
+ if (fsl_chan->set_request_count)
+ fsl_chan->set_request_count(fsl_chan, slave->request_count);
+
+ return &first->async_tx;
+
+fail:
+ /* If first was not set, then we failed to allocate the very first
+ * descriptor, and we're done */
+ if (!first)
+ return NULL;
+
+ /*
+ * First is set, so all of the descriptors we allocated have been added
+ * to first->tx_list, INCLUDING "first" itself. Therefore we
+ * must traverse the list backwards freeing each descriptor in turn
+ *
+ * We're re-using variables for the loop, oh well
+ */
+ tx_list = &first->tx_list;
+ list_for_each_entry_safe_reverse(new, prev, tx_list, node) {
+ list_del_init(&new->node);
+ dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+ }
+
+ return NULL;
+}
+
+static void fsl_dma_device_terminate_all(struct dma_chan *chan)
+{
+ struct fsl_dma_chan *fsl_chan;
+ struct fsl_desc_sw *desc, *tmp;
+ unsigned long flags;
+
+ if (!chan)
+ return;
+
+ fsl_chan = to_fsl_chan(chan);
+
+ /* Halt the DMA engine */
+ dma_halt(fsl_chan);
+
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
+ /* Remove and free all of the descriptors in the LD queue */
+ list_for_each_entry_safe(desc, tmp, &fsl_chan->ld_queue, node) {
+ list_del(&desc->node);
+ dma_pool_free(fsl_chan->desc_pool, desc, desc->async_tx.phys);
+ }
+
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
+}
+
/**
* fsl_dma_update_completed_cookie - Update the completed cookie.
* @fsl_chan : Freescale DMA channel
new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
+ new_fsl_chan->set_request_count = fsl_chan_set_request_count;
}
spin_lock_init(&new_fsl_chan->desc_lock);
dma_cap_set(DMA_MEMCPY, fdev->common.cap_mask);
dma_cap_set(DMA_INTERRUPT, fdev->common.cap_mask);
+ dma_cap_set(DMA_SLAVE, fdev->common.cap_mask);
fdev->common.device_alloc_chan_resources = fsl_dma_alloc_chan_resources;
fdev->common.device_free_chan_resources = fsl_dma_free_chan_resources;
fdev->common.device_prep_dma_interrupt = fsl_dma_prep_interrupt;
fdev->common.device_prep_dma_memcpy = fsl_dma_prep_memcpy;
fdev->common.device_is_tx_complete = fsl_dma_is_complete;
fdev->common.device_issue_pending = fsl_dma_memcpy_issue_pending;
+ fdev->common.device_prep_slave_sg = fsl_dma_prep_slave_sg;
+ fdev->common.device_terminate_all = fsl_dma_device_terminate_all;
fdev->common.dev = &dev->dev;
fdev->irq = irq_of_parse_and_map(dev->node, 0);
struct fsl_desc_sw {
struct fsl_dma_ld_hw hw;
struct list_head node;
+ struct list_head tx_list;
struct dma_async_tx_descriptor async_tx;
struct list_head *ld;
void *priv;
struct tasklet_struct tasklet;
u32 feature;
- void (*toggle_ext_pause)(struct fsl_dma_chan *fsl_chan, int size);
+ void (*toggle_ext_pause)(struct fsl_dma_chan *fsl_chan, int enable);
void (*toggle_ext_start)(struct fsl_dma_chan *fsl_chan, int enable);
void (*set_src_loop_size)(struct fsl_dma_chan *fsl_chan, int size);
void (*set_dest_loop_size)(struct fsl_dma_chan *fsl_chan, int size);
+ void (*set_request_count)(struct fsl_dma_chan *fsl_chan, int size);
};
#define to_fsl_chan(chan) container_of(chan, struct fsl_dma_chan, common)
+++ /dev/null
-/*
- * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 - 2009 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- */
-
-/*
- * This driver supports an Intel I/OAT DMA engine, which does asynchronous
- * copy operations.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/dca.h>
-#include "ioatdma.h"
-#include "ioatdma_registers.h"
-#include "ioatdma_hw.h"
-
-MODULE_VERSION(IOAT_DMA_VERSION);
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Intel Corporation");
-
-static struct pci_device_id ioat_pci_tbl[] = {
- /* I/OAT v1 platforms */
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SCNB) },
- { PCI_DEVICE(PCI_VENDOR_ID_UNISYS, PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR) },
-
- /* I/OAT v2 platforms */
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB) },
-
- /* I/OAT v3 platforms */
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG0) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG1) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG2) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG3) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG4) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG5) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG6) },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG7) },
- { 0, }
-};
-
-struct ioat_device {
- struct pci_dev *pdev;
- void __iomem *iobase;
- struct ioatdma_device *dma;
- struct dca_provider *dca;
-};
-
-static int __devinit ioat_probe(struct pci_dev *pdev,
- const struct pci_device_id *id);
-static void __devexit ioat_remove(struct pci_dev *pdev);
-
-static int ioat_dca_enabled = 1;
-module_param(ioat_dca_enabled, int, 0644);
-MODULE_PARM_DESC(ioat_dca_enabled, "control support of dca service (default: 1)");
-
-static struct pci_driver ioat_pci_driver = {
- .name = "ioatdma",
- .id_table = ioat_pci_tbl,
- .probe = ioat_probe,
- .remove = __devexit_p(ioat_remove),
-};
-
-static int __devinit ioat_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- void __iomem *iobase;
- struct ioat_device *device;
- unsigned long mmio_start, mmio_len;
- int err;
-
- err = pci_enable_device(pdev);
- if (err)
- goto err_enable_device;
-
- err = pci_request_regions(pdev, ioat_pci_driver.name);
- if (err)
- goto err_request_regions;
-
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
- if (err)
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err)
- goto err_set_dma_mask;
-
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
- if (err)
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err)
- goto err_set_dma_mask;
-
- mmio_start = pci_resource_start(pdev, 0);
- mmio_len = pci_resource_len(pdev, 0);
- iobase = ioremap(mmio_start, mmio_len);
- if (!iobase) {
- err = -ENOMEM;
- goto err_ioremap;
- }
-
- device = kzalloc(sizeof(*device), GFP_KERNEL);
- if (!device) {
- err = -ENOMEM;
- goto err_kzalloc;
- }
- device->pdev = pdev;
- pci_set_drvdata(pdev, device);
- device->iobase = iobase;
-
- pci_set_master(pdev);
-
- switch (readb(iobase + IOAT_VER_OFFSET)) {
- case IOAT_VER_1_2:
- device->dma = ioat_dma_probe(pdev, iobase);
- if (device->dma && ioat_dca_enabled)
- device->dca = ioat_dca_init(pdev, iobase);
- break;
- case IOAT_VER_2_0:
- device->dma = ioat_dma_probe(pdev, iobase);
- if (device->dma && ioat_dca_enabled)
- device->dca = ioat2_dca_init(pdev, iobase);
- break;
- case IOAT_VER_3_0:
- device->dma = ioat_dma_probe(pdev, iobase);
- if (device->dma && ioat_dca_enabled)
- device->dca = ioat3_dca_init(pdev, iobase);
- break;
- default:
- err = -ENODEV;
- break;
- }
- if (!device->dma)
- err = -ENODEV;
-
- if (err)
- goto err_version;
-
- return 0;
-
-err_version:
- kfree(device);
-err_kzalloc:
- iounmap(iobase);
-err_ioremap:
-err_set_dma_mask:
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-err_request_regions:
-err_enable_device:
- return err;
-}
-
-static void __devexit ioat_remove(struct pci_dev *pdev)
-{
- struct ioat_device *device = pci_get_drvdata(pdev);
-
- dev_err(&pdev->dev, "Removing dma and dca services\n");
- if (device->dca) {
- unregister_dca_provider(device->dca);
- free_dca_provider(device->dca);
- device->dca = NULL;
- }
-
- if (device->dma) {
- ioat_dma_remove(device->dma);
- device->dma = NULL;
- }
-
- kfree(device);
-}
-
-static int __init ioat_init_module(void)
-{
- return pci_register_driver(&ioat_pci_driver);
-}
-module_init(ioat_init_module);
-
-static void __exit ioat_exit_module(void)
-{
- pci_unregister_driver(&ioat_pci_driver);
-}
-module_exit(ioat_exit_module);
--- /dev/null
+obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
+ioatdma-objs := pci.o dma.o dma_v2.o dma_v3.o dca.o
--- /dev/null
+/*
+ * Intel I/OAT DMA Linux driver
+ * Copyright(c) 2007 - 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/dca.h>
+
+/* either a kernel change is needed, or we need something like this in kernel */
+#ifndef CONFIG_SMP
+#include <asm/smp.h>
+#undef cpu_physical_id
+#define cpu_physical_id(cpu) (cpuid_ebx(1) >> 24)
+#endif
+
+#include "dma.h"
+#include "registers.h"
+
+/*
+ * Bit 7 of a tag map entry is the "valid" bit, if it is set then bits 0:6
+ * contain the bit number of the APIC ID to map into the DCA tag. If the valid
+ * bit is not set, then the value must be 0 or 1 and defines the bit in the tag.
+ */
+#define DCA_TAG_MAP_VALID 0x80
+
+#define DCA3_TAG_MAP_BIT_TO_INV 0x80
+#define DCA3_TAG_MAP_BIT_TO_SEL 0x40
+#define DCA3_TAG_MAP_LITERAL_VAL 0x1
+
+#define DCA_TAG_MAP_MASK 0xDF
+
+/* expected tag map bytes for I/OAT ver.2 */
+#define DCA2_TAG_MAP_BYTE0 0x80
+#define DCA2_TAG_MAP_BYTE1 0x0
+#define DCA2_TAG_MAP_BYTE2 0x81
+#define DCA2_TAG_MAP_BYTE3 0x82
+#define DCA2_TAG_MAP_BYTE4 0x82
+
+/* verify if tag map matches expected values */
+static inline int dca2_tag_map_valid(u8 *tag_map)
+{
+ return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+ (tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+ (tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+ (tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+ (tag_map[4] == DCA2_TAG_MAP_BYTE4));
+}
+
+/*
+ * "Legacy" DCA systems do not implement the DCA register set in the
+ * I/OAT device. Software needs direct support for their tag mappings.
+ */
+
+#define APICID_BIT(x) (DCA_TAG_MAP_VALID | (x))
+#define IOAT_TAG_MAP_LEN 8
+
+static u8 ioat_tag_map_BNB[IOAT_TAG_MAP_LEN] = {
+ 1, APICID_BIT(1), APICID_BIT(2), APICID_BIT(2), };
+static u8 ioat_tag_map_SCNB[IOAT_TAG_MAP_LEN] = {
+ 1, APICID_BIT(1), APICID_BIT(2), APICID_BIT(2), };
+static u8 ioat_tag_map_CNB[IOAT_TAG_MAP_LEN] = {
+ 1, APICID_BIT(1), APICID_BIT(3), APICID_BIT(4), APICID_BIT(2), };
+static u8 ioat_tag_map_UNISYS[IOAT_TAG_MAP_LEN] = { 0 };
+
+/* pack PCI B/D/F into a u16 */
+static inline u16 dcaid_from_pcidev(struct pci_dev *pci)
+{
+ return (pci->bus->number << 8) | pci->devfn;
+}
+
+static int dca_enabled_in_bios(struct pci_dev *pdev)
+{
+ /* CPUID level 9 returns DCA configuration */
+ /* Bit 0 indicates DCA enabled by the BIOS */
+ unsigned long cpuid_level_9;
+ int res;
+
+ cpuid_level_9 = cpuid_eax(9);
+ res = test_bit(0, &cpuid_level_9);
+ if (!res)
+ dev_err(&pdev->dev, "DCA is disabled in BIOS\n");
+
+ return res;
+}
+
+static int system_has_dca_enabled(struct pci_dev *pdev)
+{
+ if (boot_cpu_has(X86_FEATURE_DCA))
+ return dca_enabled_in_bios(pdev);
+
+ dev_err(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n");
+ return 0;
+}
+
+struct ioat_dca_slot {
+ struct pci_dev *pdev; /* requester device */
+ u16 rid; /* requester id, as used by IOAT */
+};
+
+#define IOAT_DCA_MAX_REQ 6
+#define IOAT3_DCA_MAX_REQ 2
+
+struct ioat_dca_priv {
+ void __iomem *iobase;
+ void __iomem *dca_base;
+ int max_requesters;
+ int requester_count;
+ u8 tag_map[IOAT_TAG_MAP_LEN];
+ struct ioat_dca_slot req_slots[0];
+};
+
+/* 5000 series chipset DCA Port Requester ID Table Entry Format
+ * [15:8] PCI-Express Bus Number
+ * [7:3] PCI-Express Device Number
+ * [2:0] PCI-Express Function Number
+ *
+ * 5000 series chipset DCA control register format
+ * [7:1] Reserved (0)
+ * [0] Ignore Function Number
+ */
+
+static int ioat_dca_add_requester(struct dca_provider *dca, struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 id;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+ id = dcaid_from_pcidev(pdev);
+
+ if (ioatdca->requester_count == ioatdca->max_requesters)
+ return -ENODEV;
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == NULL) {
+ /* found an empty slot */
+ ioatdca->requester_count++;
+ ioatdca->req_slots[i].pdev = pdev;
+ ioatdca->req_slots[i].rid = id;
+ writew(id, ioatdca->dca_base + (i * 4));
+ /* make sure the ignore function bit is off */
+ writeb(0, ioatdca->dca_base + (i * 4) + 2);
+ return i;
+ }
+ }
+ /* Error, ioatdma->requester_count is out of whack */
+ return -EFAULT;
+}
+
+static int ioat_dca_remove_requester(struct dca_provider *dca,
+ struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == pdev) {
+ writew(0, ioatdca->dca_base + (i * 4));
+ ioatdca->req_slots[i].pdev = NULL;
+ ioatdca->req_slots[i].rid = 0;
+ ioatdca->requester_count--;
+ return i;
+ }
+ }
+ return -ENODEV;
+}
+
+static u8 ioat_dca_get_tag(struct dca_provider *dca,
+ struct device *dev,
+ int cpu)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ int i, apic_id, bit, value;
+ u8 entry, tag;
+
+ tag = 0;
+ apic_id = cpu_physical_id(cpu);
+
+ for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
+ entry = ioatdca->tag_map[i];
+ if (entry & DCA_TAG_MAP_VALID) {
+ bit = entry & ~DCA_TAG_MAP_VALID;
+ value = (apic_id & (1 << bit)) ? 1 : 0;
+ } else {
+ value = entry ? 1 : 0;
+ }
+ tag |= (value << i);
+ }
+ return tag;
+}
+
+static int ioat_dca_dev_managed(struct dca_provider *dca,
+ struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+
+ pdev = to_pci_dev(dev);
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == pdev)
+ return 1;
+ }
+ return 0;
+}
+
+static struct dca_ops ioat_dca_ops = {
+ .add_requester = ioat_dca_add_requester,
+ .remove_requester = ioat_dca_remove_requester,
+ .get_tag = ioat_dca_get_tag,
+ .dev_managed = ioat_dca_dev_managed,
+};
+
+
+struct dca_provider * __devinit
+ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase)
+{
+ struct dca_provider *dca;
+ struct ioat_dca_priv *ioatdca;
+ u8 *tag_map = NULL;
+ int i;
+ int err;
+ u8 version;
+ u8 max_requesters;
+
+ if (!system_has_dca_enabled(pdev))
+ return NULL;
+
+ /* I/OAT v1 systems must have a known tag_map to support DCA */
+ switch (pdev->vendor) {
+ case PCI_VENDOR_ID_INTEL:
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_INTEL_IOAT:
+ tag_map = ioat_tag_map_BNB;
+ break;
+ case PCI_DEVICE_ID_INTEL_IOAT_CNB:
+ tag_map = ioat_tag_map_CNB;
+ break;
+ case PCI_DEVICE_ID_INTEL_IOAT_SCNB:
+ tag_map = ioat_tag_map_SCNB;
+ break;
+ }
+ break;
+ case PCI_VENDOR_ID_UNISYS:
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR:
+ tag_map = ioat_tag_map_UNISYS;
+ break;
+ }
+ break;
+ }
+ if (tag_map == NULL)
+ return NULL;
+
+ version = readb(iobase + IOAT_VER_OFFSET);
+ if (version == IOAT_VER_3_0)
+ max_requesters = IOAT3_DCA_MAX_REQ;
+ else
+ max_requesters = IOAT_DCA_MAX_REQ;
+
+ dca = alloc_dca_provider(&ioat_dca_ops,
+ sizeof(*ioatdca) +
+ (sizeof(struct ioat_dca_slot) * max_requesters));
+ if (!dca)
+ return NULL;
+
+ ioatdca = dca_priv(dca);
+ ioatdca->max_requesters = max_requesters;
+ ioatdca->dca_base = iobase + 0x54;
+
+ /* copy over the APIC ID to DCA tag mapping */
+ for (i = 0; i < IOAT_TAG_MAP_LEN; i++)
+ ioatdca->tag_map[i] = tag_map[i];
+
+ err = register_dca_provider(dca, &pdev->dev);
+ if (err) {
+ free_dca_provider(dca);
+ return NULL;
+ }
+
+ return dca;
+}
+
+
+static int ioat2_dca_add_requester(struct dca_provider *dca, struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 id;
+ u16 global_req_table;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+ id = dcaid_from_pcidev(pdev);
+
+ if (ioatdca->requester_count == ioatdca->max_requesters)
+ return -ENODEV;
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == NULL) {
+ /* found an empty slot */
+ ioatdca->requester_count++;
+ ioatdca->req_slots[i].pdev = pdev;
+ ioatdca->req_slots[i].rid = id;
+ global_req_table =
+ readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
+ writel(id | IOAT_DCA_GREQID_VALID,
+ ioatdca->iobase + global_req_table + (i * 4));
+ return i;
+ }
+ }
+ /* Error, ioatdma->requester_count is out of whack */
+ return -EFAULT;
+}
+
+static int ioat2_dca_remove_requester(struct dca_provider *dca,
+ struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 global_req_table;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == pdev) {
+ global_req_table =
+ readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
+ writel(0, ioatdca->iobase + global_req_table + (i * 4));
+ ioatdca->req_slots[i].pdev = NULL;
+ ioatdca->req_slots[i].rid = 0;
+ ioatdca->requester_count--;
+ return i;
+ }
+ }
+ return -ENODEV;
+}
+
+static u8 ioat2_dca_get_tag(struct dca_provider *dca,
+ struct device *dev,
+ int cpu)
+{
+ u8 tag;
+
+ tag = ioat_dca_get_tag(dca, dev, cpu);
+ tag = (~tag) & 0x1F;
+ return tag;
+}
+
+static struct dca_ops ioat2_dca_ops = {
+ .add_requester = ioat2_dca_add_requester,
+ .remove_requester = ioat2_dca_remove_requester,
+ .get_tag = ioat2_dca_get_tag,
+ .dev_managed = ioat_dca_dev_managed,
+};
+
+static int ioat2_dca_count_dca_slots(void __iomem *iobase, u16 dca_offset)
+{
+ int slots = 0;
+ u32 req;
+ u16 global_req_table;
+
+ global_req_table = readw(iobase + dca_offset + IOAT_DCA_GREQID_OFFSET);
+ if (global_req_table == 0)
+ return 0;
+ do {
+ req = readl(iobase + global_req_table + (slots * sizeof(u32)));
+ slots++;
+ } while ((req & IOAT_DCA_GREQID_LASTID) == 0);
+
+ return slots;
+}
+
+struct dca_provider * __devinit
+ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase)
+{
+ struct dca_provider *dca;
+ struct ioat_dca_priv *ioatdca;
+ int slots;
+ int i;
+ int err;
+ u32 tag_map;
+ u16 dca_offset;
+ u16 csi_fsb_control;
+ u16 pcie_control;
+ u8 bit;
+
+ if (!system_has_dca_enabled(pdev))
+ return NULL;
+
+ dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
+ if (dca_offset == 0)
+ return NULL;
+
+ slots = ioat2_dca_count_dca_slots(iobase, dca_offset);
+ if (slots == 0)
+ return NULL;
+
+ dca = alloc_dca_provider(&ioat2_dca_ops,
+ sizeof(*ioatdca)
+ + (sizeof(struct ioat_dca_slot) * slots));
+ if (!dca)
+ return NULL;
+
+ ioatdca = dca_priv(dca);
+ ioatdca->iobase = iobase;
+ ioatdca->dca_base = iobase + dca_offset;
+ ioatdca->max_requesters = slots;
+
+ /* some bios might not know to turn these on */
+ csi_fsb_control = readw(ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
+ if ((csi_fsb_control & IOAT_FSB_CAP_ENABLE_PREFETCH) == 0) {
+ csi_fsb_control |= IOAT_FSB_CAP_ENABLE_PREFETCH;
+ writew(csi_fsb_control,
+ ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
+ }
+ pcie_control = readw(ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
+ if ((pcie_control & IOAT_PCI_CAP_ENABLE_MEMWR) == 0) {
+ pcie_control |= IOAT_PCI_CAP_ENABLE_MEMWR;
+ writew(pcie_control,
+ ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
+ }
+
+
+ /* TODO version, compatibility and configuration checks */
+
+ /* copy out the APIC to DCA tag map */
+ tag_map = readl(ioatdca->dca_base + IOAT_APICID_TAG_MAP_OFFSET);
+ for (i = 0; i < 5; i++) {
+ bit = (tag_map >> (4 * i)) & 0x0f;
+ if (bit < 8)
+ ioatdca->tag_map[i] = bit | DCA_TAG_MAP_VALID;
+ else
+ ioatdca->tag_map[i] = 0;
+ }
+
+ if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+ dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+ "disabling DCA\n");
+ free_dca_provider(dca);
+ return NULL;
+ }
+
+ err = register_dca_provider(dca, &pdev->dev);
+ if (err) {
+ free_dca_provider(dca);
+ return NULL;
+ }
+
+ return dca;
+}
+
+static int ioat3_dca_add_requester(struct dca_provider *dca, struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 id;
+ u16 global_req_table;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+ id = dcaid_from_pcidev(pdev);
+
+ if (ioatdca->requester_count == ioatdca->max_requesters)
+ return -ENODEV;
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == NULL) {
+ /* found an empty slot */
+ ioatdca->requester_count++;
+ ioatdca->req_slots[i].pdev = pdev;
+ ioatdca->req_slots[i].rid = id;
+ global_req_table =
+ readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
+ writel(id | IOAT_DCA_GREQID_VALID,
+ ioatdca->iobase + global_req_table + (i * 4));
+ return i;
+ }
+ }
+ /* Error, ioatdma->requester_count is out of whack */
+ return -EFAULT;
+}
+
+static int ioat3_dca_remove_requester(struct dca_provider *dca,
+ struct device *dev)
+{
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ struct pci_dev *pdev;
+ int i;
+ u16 global_req_table;
+
+ /* This implementation only supports PCI-Express */
+ if (dev->bus != &pci_bus_type)
+ return -ENODEV;
+ pdev = to_pci_dev(dev);
+
+ for (i = 0; i < ioatdca->max_requesters; i++) {
+ if (ioatdca->req_slots[i].pdev == pdev) {
+ global_req_table =
+ readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
+ writel(0, ioatdca->iobase + global_req_table + (i * 4));
+ ioatdca->req_slots[i].pdev = NULL;
+ ioatdca->req_slots[i].rid = 0;
+ ioatdca->requester_count--;
+ return i;
+ }
+ }
+ return -ENODEV;
+}
+
+static u8 ioat3_dca_get_tag(struct dca_provider *dca,
+ struct device *dev,
+ int cpu)
+{
+ u8 tag;
+
+ struct ioat_dca_priv *ioatdca = dca_priv(dca);
+ int i, apic_id, bit, value;
+ u8 entry;
+
+ tag = 0;
+ apic_id = cpu_physical_id(cpu);
+
+ for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
+ entry = ioatdca->tag_map[i];
+ if (entry & DCA3_TAG_MAP_BIT_TO_SEL) {
+ bit = entry &
+ ~(DCA3_TAG_MAP_BIT_TO_SEL | DCA3_TAG_MAP_BIT_TO_INV);
+ value = (apic_id & (1 << bit)) ? 1 : 0;
+ } else if (entry & DCA3_TAG_MAP_BIT_TO_INV) {
+ bit = entry & ~DCA3_TAG_MAP_BIT_TO_INV;
+ value = (apic_id & (1 << bit)) ? 0 : 1;
+ } else {
+ value = (entry & DCA3_TAG_MAP_LITERAL_VAL) ? 1 : 0;
+ }
+ tag |= (value << i);
+ }
+
+ return tag;
+}
+
+static struct dca_ops ioat3_dca_ops = {
+ .add_requester = ioat3_dca_add_requester,
+ .remove_requester = ioat3_dca_remove_requester,
+ .get_tag = ioat3_dca_get_tag,
+ .dev_managed = ioat_dca_dev_managed,
+};
+
+static int ioat3_dca_count_dca_slots(void *iobase, u16 dca_offset)
+{
+ int slots = 0;
+ u32 req;
+ u16 global_req_table;
+
+ global_req_table = readw(iobase + dca_offset + IOAT3_DCA_GREQID_OFFSET);
+ if (global_req_table == 0)
+ return 0;
+
+ do {
+ req = readl(iobase + global_req_table + (slots * sizeof(u32)));
+ slots++;
+ } while ((req & IOAT_DCA_GREQID_LASTID) == 0);
+
+ return slots;
+}
+
+struct dca_provider * __devinit
+ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase)
+{
+ struct dca_provider *dca;
+ struct ioat_dca_priv *ioatdca;
+ int slots;
+ int i;
+ int err;
+ u16 dca_offset;
+ u16 csi_fsb_control;
+ u16 pcie_control;
+ u8 bit;
+
+ union {
+ u64 full;
+ struct {
+ u32 low;
+ u32 high;
+ };
+ } tag_map;
+
+ if (!system_has_dca_enabled(pdev))
+ return NULL;
+
+ dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
+ if (dca_offset == 0)
+ return NULL;
+
+ slots = ioat3_dca_count_dca_slots(iobase, dca_offset);
+ if (slots == 0)
+ return NULL;
+
+ dca = alloc_dca_provider(&ioat3_dca_ops,
+ sizeof(*ioatdca)
+ + (sizeof(struct ioat_dca_slot) * slots));
+ if (!dca)
+ return NULL;
+
+ ioatdca = dca_priv(dca);
+ ioatdca->iobase = iobase;
+ ioatdca->dca_base = iobase + dca_offset;
+ ioatdca->max_requesters = slots;
+
+ /* some bios might not know to turn these on */
+ csi_fsb_control = readw(ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
+ if ((csi_fsb_control & IOAT3_CSI_CONTROL_PREFETCH) == 0) {
+ csi_fsb_control |= IOAT3_CSI_CONTROL_PREFETCH;
+ writew(csi_fsb_control,
+ ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
+ }
+ pcie_control = readw(ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
+ if ((pcie_control & IOAT3_PCI_CONTROL_MEMWR) == 0) {
+ pcie_control |= IOAT3_PCI_CONTROL_MEMWR;
+ writew(pcie_control,
+ ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
+ }
+
+
+ /* TODO version, compatibility and configuration checks */
+
+ /* copy out the APIC to DCA tag map */
+ tag_map.low =
+ readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_LOW);
+ tag_map.high =
+ readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_HIGH);
+ for (i = 0; i < 8; i++) {
+ bit = tag_map.full >> (8 * i);
+ ioatdca->tag_map[i] = bit & DCA_TAG_MAP_MASK;
+ }
+
+ err = register_dca_provider(dca, &pdev->dev);
+ if (err) {
+ free_dca_provider(dca);
+ return NULL;
+ }
+
+ return dca;
+}
--- /dev/null
+/*
+ * Intel I/OAT DMA Linux driver
+ * Copyright(c) 2004 - 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+/*
+ * This driver supports an Intel I/OAT DMA engine, which does asynchronous
+ * copy operations.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+#include <linux/i7300_idle.h>
+#include "dma.h"
+#include "registers.h"
+#include "hw.h"
+
+int ioat_pending_level = 4;
+module_param(ioat_pending_level, int, 0644);
+MODULE_PARM_DESC(ioat_pending_level,
+ "high-water mark for pushing ioat descriptors (default: 4)");
+
+/* internal functions */
+static void ioat1_cleanup(struct ioat_dma_chan *ioat);
+static void ioat1_dma_start_null_desc(struct ioat_dma_chan *ioat);
+
+/**
+ * ioat_dma_do_interrupt - handler used for single vector interrupt mode
+ * @irq: interrupt id
+ * @data: interrupt data
+ */
+static irqreturn_t ioat_dma_do_interrupt(int irq, void *data)
+{
+ struct ioatdma_device *instance = data;
+ struct ioat_chan_common *chan;
+ unsigned long attnstatus;
+ int bit;
+ u8 intrctrl;
+
+ intrctrl = readb(instance->reg_base + IOAT_INTRCTRL_OFFSET);
+
+ if (!(intrctrl & IOAT_INTRCTRL_MASTER_INT_EN))
+ return IRQ_NONE;
+
+ if (!(intrctrl & IOAT_INTRCTRL_INT_STATUS)) {
+ writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
+ return IRQ_NONE;
+ }
+
+ attnstatus = readl(instance->reg_base + IOAT_ATTNSTATUS_OFFSET);
+ for_each_bit(bit, &attnstatus, BITS_PER_LONG) {
+ chan = ioat_chan_by_index(instance, bit);
+ tasklet_schedule(&chan->cleanup_task);
+ }
+
+ writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
+ return IRQ_HANDLED;
+}
+
+/**
+ * ioat_dma_do_interrupt_msix - handler used for vector-per-channel interrupt mode
+ * @irq: interrupt id
+ * @data: interrupt data
+ */
+static irqreturn_t ioat_dma_do_interrupt_msix(int irq, void *data)
+{
+ struct ioat_chan_common *chan = data;
+
+ tasklet_schedule(&chan->cleanup_task);
+
+ return IRQ_HANDLED;
+}
+
+static void ioat1_cleanup_tasklet(unsigned long data);
+
+/* common channel initialization */
+void ioat_init_channel(struct ioatdma_device *device,
+ struct ioat_chan_common *chan, int idx,
+ void (*timer_fn)(unsigned long),
+ void (*tasklet)(unsigned long),
+ unsigned long ioat)
+{
+ struct dma_device *dma = &device->common;
+
+ chan->device = device;
+ chan->reg_base = device->reg_base + (0x80 * (idx + 1));
+ spin_lock_init(&chan->cleanup_lock);
+ chan->common.device = dma;
+ list_add_tail(&chan->common.device_node, &dma->channels);
+ device->idx[idx] = chan;
+ init_timer(&chan->timer);
+ chan->timer.function = timer_fn;
+ chan->timer.data = ioat;
+ tasklet_init(&chan->cleanup_task, tasklet, ioat);
+ tasklet_disable(&chan->cleanup_task);
+}
+
+static void ioat1_timer_event(unsigned long data);
+
+/**
+ * ioat1_dma_enumerate_channels - find and initialize the device's channels
+ * @device: the device to be enumerated
+ */
+static int ioat1_enumerate_channels(struct ioatdma_device *device)
+{
+ u8 xfercap_scale;
+ u32 xfercap;
+ int i;
+ struct ioat_dma_chan *ioat;
+ struct device *dev = &device->pdev->dev;
+ struct dma_device *dma = &device->common;
+
+ INIT_LIST_HEAD(&dma->channels);
+ dma->chancnt = readb(device->reg_base + IOAT_CHANCNT_OFFSET);
+ dma->chancnt &= 0x1f; /* bits [4:0] valid */
+ if (dma->chancnt > ARRAY_SIZE(device->idx)) {
+ dev_warn(dev, "(%d) exceeds max supported channels (%zu)\n",
+ dma->chancnt, ARRAY_SIZE(device->idx));
+ dma->chancnt = ARRAY_SIZE(device->idx);
+ }
+ xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
+ xfercap_scale &= 0x1f; /* bits [4:0] valid */
+ xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
+ dev_dbg(dev, "%s: xfercap = %d\n", __func__, xfercap);
+
+#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
+ if (i7300_idle_platform_probe(NULL, NULL, 1) == 0)
+ dma->chancnt--;
+#endif
+ for (i = 0; i < dma->chancnt; i++) {
+ ioat = devm_kzalloc(dev, sizeof(*ioat), GFP_KERNEL);
+ if (!ioat)
+ break;
+
+ ioat_init_channel(device, &ioat->base, i,
+ ioat1_timer_event,
+ ioat1_cleanup_tasklet,
+ (unsigned long) ioat);
+ ioat->xfercap = xfercap;
+ spin_lock_init(&ioat->desc_lock);
+ INIT_LIST_HEAD(&ioat->free_desc);
+ INIT_LIST_HEAD(&ioat->used_desc);
+ }
+ dma->chancnt = i;
+ return i;
+}
+
+/**
+ * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended
+ * descriptors to hw
+ * @chan: DMA channel handle
+ */
+static inline void
+__ioat1_dma_memcpy_issue_pending(struct ioat_dma_chan *ioat)
+{
+ void __iomem *reg_base = ioat->base.reg_base;
+
+ dev_dbg(to_dev(&ioat->base), "%s: pending: %d\n",
+ __func__, ioat->pending);
+ ioat->pending = 0;
+ writeb(IOAT_CHANCMD_APPEND, reg_base + IOAT1_CHANCMD_OFFSET);
+}
+
+static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(chan);
+
+ if (ioat->pending > 0) {
+ spin_lock_bh(&ioat->desc_lock);
+ __ioat1_dma_memcpy_issue_pending(ioat);
+ spin_unlock_bh(&ioat->desc_lock);
+ }
+}
+
+/**
+ * ioat1_reset_channel - restart a channel
+ * @ioat: IOAT DMA channel handle
+ */
+static void ioat1_reset_channel(struct ioat_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ void __iomem *reg_base = chan->reg_base;
+ u32 chansts, chanerr;
+
+ dev_warn(to_dev(chan), "reset\n");
+ chanerr = readl(reg_base + IOAT_CHANERR_OFFSET);
+ chansts = *chan->completion & IOAT_CHANSTS_STATUS;
+ if (chanerr) {
+ dev_err(to_dev(chan),
+ "chan%d, CHANSTS = 0x%08x CHANERR = 0x%04x, clearing\n",
+ chan_num(chan), chansts, chanerr);
+ writel(chanerr, reg_base + IOAT_CHANERR_OFFSET);
+ }
+
+ /*
+ * whack it upside the head with a reset
+ * and wait for things to settle out.
+ * force the pending count to a really big negative
+ * to make sure no one forces an issue_pending
+ * while we're waiting.
+ */
+
+ ioat->pending = INT_MIN;
+ writeb(IOAT_CHANCMD_RESET,
+ reg_base + IOAT_CHANCMD_OFFSET(chan->device->version));
+ set_bit(IOAT_RESET_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + RESET_DELAY);
+}
+
+static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct dma_chan *c = tx->chan;
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+ struct ioat_desc_sw *desc = tx_to_ioat_desc(tx);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_desc_sw *first;
+ struct ioat_desc_sw *chain_tail;
+ dma_cookie_t cookie;
+
+ spin_lock_bh(&ioat->desc_lock);
+ /* cookie incr and addition to used_list must be atomic */
+ cookie = c->cookie;
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
+ c->cookie = cookie;
+ tx->cookie = cookie;
+ dev_dbg(to_dev(&ioat->base), "%s: cookie: %d\n", __func__, cookie);
+
+ /* write address into NextDescriptor field of last desc in chain */
+ first = to_ioat_desc(desc->tx_list.next);
+ chain_tail = to_ioat_desc(ioat->used_desc.prev);
+ /* make descriptor updates globally visible before chaining */
+ wmb();
+ chain_tail->hw->next = first->txd.phys;
+ list_splice_tail_init(&desc->tx_list, &ioat->used_desc);
+ dump_desc_dbg(ioat, chain_tail);
+ dump_desc_dbg(ioat, first);
+
+ if (!test_and_set_bit(IOAT_COMPLETION_PENDING, &chan->state))
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+
+ ioat->active += desc->hw->tx_cnt;
+ ioat->pending += desc->hw->tx_cnt;
+ if (ioat->pending >= ioat_pending_level)
+ __ioat1_dma_memcpy_issue_pending(ioat);
+ spin_unlock_bh(&ioat->desc_lock);
+
+ return cookie;
+}
+
+/**
+ * ioat_dma_alloc_descriptor - allocate and return a sw and hw descriptor pair
+ * @ioat: the channel supplying the memory pool for the descriptors
+ * @flags: allocation flags
+ */
+static struct ioat_desc_sw *
+ioat_dma_alloc_descriptor(struct ioat_dma_chan *ioat, gfp_t flags)
+{
+ struct ioat_dma_descriptor *desc;
+ struct ioat_desc_sw *desc_sw;
+ struct ioatdma_device *ioatdma_device;
+ dma_addr_t phys;
+
+ ioatdma_device = ioat->base.device;
+ desc = pci_pool_alloc(ioatdma_device->dma_pool, flags, &phys);
+ if (unlikely(!desc))
+ return NULL;
+
+ desc_sw = kzalloc(sizeof(*desc_sw), flags);
+ if (unlikely(!desc_sw)) {
+ pci_pool_free(ioatdma_device->dma_pool, desc, phys);
+ return NULL;
+ }
+
+ memset(desc, 0, sizeof(*desc));
+
+ INIT_LIST_HEAD(&desc_sw->tx_list);
+ dma_async_tx_descriptor_init(&desc_sw->txd, &ioat->base.common);
+ desc_sw->txd.tx_submit = ioat1_tx_submit;
+ desc_sw->hw = desc;
+ desc_sw->txd.phys = phys;
+ set_desc_id(desc_sw, -1);
+
+ return desc_sw;
+}
+
+static int ioat_initial_desc_count = 256;
+module_param(ioat_initial_desc_count, int, 0644);
+MODULE_PARM_DESC(ioat_initial_desc_count,
+ "ioat1: initial descriptors per channel (default: 256)");
+/**
+ * ioat1_dma_alloc_chan_resources - returns the number of allocated descriptors
+ * @chan: the channel to be filled out
+ */
+static int ioat1_dma_alloc_chan_resources(struct dma_chan *c)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_desc_sw *desc;
+ u32 chanerr;
+ int i;
+ LIST_HEAD(tmp_list);
+
+ /* have we already been set up? */
+ if (!list_empty(&ioat->free_desc))
+ return ioat->desccount;
+
+ /* Setup register to interrupt and write completion status on error */
+ writew(IOAT_CHANCTRL_RUN, chan->reg_base + IOAT_CHANCTRL_OFFSET);
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ if (chanerr) {
+ dev_err(to_dev(chan), "CHANERR = %x, clearing\n", chanerr);
+ writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
+ }
+
+ /* Allocate descriptors */
+ for (i = 0; i < ioat_initial_desc_count; i++) {
+ desc = ioat_dma_alloc_descriptor(ioat, GFP_KERNEL);
+ if (!desc) {
+ dev_err(to_dev(chan), "Only %d initial descriptors\n", i);
+ break;
+ }
+ set_desc_id(desc, i);
+ list_add_tail(&desc->node, &tmp_list);
+ }
+ spin_lock_bh(&ioat->desc_lock);
+ ioat->desccount = i;
+ list_splice(&tmp_list, &ioat->free_desc);
+ spin_unlock_bh(&ioat->desc_lock);
+
+ /* allocate a completion writeback area */
+ /* doing 2 32bit writes to mmio since 1 64b write doesn't work */
+ chan->completion = pci_pool_alloc(chan->device->completion_pool,
+ GFP_KERNEL, &chan->completion_dma);
+ memset(chan->completion, 0, sizeof(*chan->completion));
+ writel(((u64) chan->completion_dma) & 0x00000000FFFFFFFF,
+ chan->reg_base + IOAT_CHANCMP_OFFSET_LOW);
+ writel(((u64) chan->completion_dma) >> 32,
+ chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH);
+
+ tasklet_enable(&chan->cleanup_task);
+ ioat1_dma_start_null_desc(ioat); /* give chain to dma device */
+ dev_dbg(to_dev(chan), "%s: allocated %d descriptors\n",
+ __func__, ioat->desccount);
+ return ioat->desccount;
+}
+
+/**
+ * ioat1_dma_free_chan_resources - release all the descriptors
+ * @chan: the channel to be cleaned
+ */
+static void ioat1_dma_free_chan_resources(struct dma_chan *c)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioatdma_device *ioatdma_device = chan->device;
+ struct ioat_desc_sw *desc, *_desc;
+ int in_use_descs = 0;
+
+ /* Before freeing channel resources first check
+ * if they have been previously allocated for this channel.
+ */
+ if (ioat->desccount == 0)
+ return;
+
+ tasklet_disable(&chan->cleanup_task);
+ del_timer_sync(&chan->timer);
+ ioat1_cleanup(ioat);
+
+ /* Delay 100ms after reset to allow internal DMA logic to quiesce
+ * before removing DMA descriptor resources.
+ */
+ writeb(IOAT_CHANCMD_RESET,
+ chan->reg_base + IOAT_CHANCMD_OFFSET(chan->device->version));
+ mdelay(100);
+
+ spin_lock_bh(&ioat->desc_lock);
+ list_for_each_entry_safe(desc, _desc, &ioat->used_desc, node) {
+ dev_dbg(to_dev(chan), "%s: freeing %d from used list\n",
+ __func__, desc_id(desc));
+ dump_desc_dbg(ioat, desc);
+ in_use_descs++;
+ list_del(&desc->node);
+ pci_pool_free(ioatdma_device->dma_pool, desc->hw,
+ desc->txd.phys);
+ kfree(desc);
+ }
+ list_for_each_entry_safe(desc, _desc,
+ &ioat->free_desc, node) {
+ list_del(&desc->node);
+ pci_pool_free(ioatdma_device->dma_pool, desc->hw,
+ desc->txd.phys);
+ kfree(desc);
+ }
+ spin_unlock_bh(&ioat->desc_lock);
+
+ pci_pool_free(ioatdma_device->completion_pool,
+ chan->completion,
+ chan->completion_dma);
+
+ /* one is ok since we left it on there on purpose */
+ if (in_use_descs > 1)
+ dev_err(to_dev(chan), "Freeing %d in use descriptors!\n",
+ in_use_descs - 1);
+
+ chan->last_completion = 0;
+ chan->completion_dma = 0;
+ ioat->pending = 0;
+ ioat->desccount = 0;
+}
+
+/**
+ * ioat1_dma_get_next_descriptor - return the next available descriptor
+ * @ioat: IOAT DMA channel handle
+ *
+ * Gets the next descriptor from the chain, and must be called with the
+ * channel's desc_lock held. Allocates more descriptors if the channel
+ * has run out.
+ */
+static struct ioat_desc_sw *
+ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat)
+{
+ struct ioat_desc_sw *new;
+
+ if (!list_empty(&ioat->free_desc)) {
+ new = to_ioat_desc(ioat->free_desc.next);
+ list_del(&new->node);
+ } else {
+ /* try to get another desc */
+ new = ioat_dma_alloc_descriptor(ioat, GFP_ATOMIC);
+ if (!new) {
+ dev_err(to_dev(&ioat->base), "alloc failed\n");
+ return NULL;
+ }
+ }
+ dev_dbg(to_dev(&ioat->base), "%s: allocated: %d\n",
+ __func__, desc_id(new));
+ prefetch(new->hw);
+ return new;
+}
+
+static struct dma_async_tx_descriptor *
+ioat1_dma_prep_memcpy(struct dma_chan *c, dma_addr_t dma_dest,
+ dma_addr_t dma_src, size_t len, unsigned long flags)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+ struct ioat_desc_sw *desc;
+ size_t copy;
+ LIST_HEAD(chain);
+ dma_addr_t src = dma_src;
+ dma_addr_t dest = dma_dest;
+ size_t total_len = len;
+ struct ioat_dma_descriptor *hw = NULL;
+ int tx_cnt = 0;
+
+ spin_lock_bh(&ioat->desc_lock);
+ desc = ioat1_dma_get_next_descriptor(ioat);
+ do {
+ if (!desc)
+ break;
+
+ tx_cnt++;
+ copy = min_t(size_t, len, ioat->xfercap);
+
+ hw = desc->hw;
+ hw->size = copy;
+ hw->ctl = 0;
+ hw->src_addr = src;
+ hw->dst_addr = dest;
+
+ list_add_tail(&desc->node, &chain);
+
+ len -= copy;
+ dest += copy;
+ src += copy;
+ if (len) {
+ struct ioat_desc_sw *next;
+
+ async_tx_ack(&desc->txd);
+ next = ioat1_dma_get_next_descriptor(ioat);
+ hw->next = next ? next->txd.phys : 0;
+ dump_desc_dbg(ioat, desc);
+ desc = next;
+ } else
+ hw->next = 0;
+ } while (len);
+
+ if (!desc) {
+ struct ioat_chan_common *chan = &ioat->base;
+
+ dev_err(to_dev(chan),
+ "chan%d - get_next_desc failed\n", chan_num(chan));
+ list_splice(&chain, &ioat->free_desc);
+ spin_unlock_bh(&ioat->desc_lock);
+ return NULL;
+ }
+ spin_unlock_bh(&ioat->desc_lock);
+
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ list_splice(&chain, &desc->tx_list);
+ hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ hw->ctl_f.compl_write = 1;
+ hw->tx_cnt = tx_cnt;
+ dump_desc_dbg(ioat, desc);
+
+ return &desc->txd;
+}
+
+static void ioat1_cleanup_tasklet(unsigned long data)
+{
+ struct ioat_dma_chan *chan = (void *)data;
+
+ ioat1_cleanup(chan);
+ writew(IOAT_CHANCTRL_RUN, chan->base.reg_base + IOAT_CHANCTRL_OFFSET);
+}
+
+void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags,
+ size_t len, struct ioat_dma_descriptor *hw)
+{
+ struct pci_dev *pdev = chan->device->pdev;
+ size_t offset = len - hw->size;
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP))
+ ioat_unmap(pdev, hw->dst_addr - offset, len,
+ PCI_DMA_FROMDEVICE, flags, 1);
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP))
+ ioat_unmap(pdev, hw->src_addr - offset, len,
+ PCI_DMA_TODEVICE, flags, 0);
+}
+
+unsigned long ioat_get_current_completion(struct ioat_chan_common *chan)
+{
+ unsigned long phys_complete;
+ u64 completion;
+
+ completion = *chan->completion;
+ phys_complete = ioat_chansts_to_addr(completion);
+
+ dev_dbg(to_dev(chan), "%s: phys_complete: %#llx\n", __func__,
+ (unsigned long long) phys_complete);
+
+ if (is_ioat_halted(completion)) {
+ u32 chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ dev_err(to_dev(chan), "Channel halted, chanerr = %x\n",
+ chanerr);
+
+ /* TODO do something to salvage the situation */
+ }
+
+ return phys_complete;
+}
+
+bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
+ unsigned long *phys_complete)
+{
+ *phys_complete = ioat_get_current_completion(chan);
+ if (*phys_complete == chan->last_completion)
+ return false;
+ clear_bit(IOAT_COMPLETION_ACK, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+
+ return true;
+}
+
+static void __cleanup(struct ioat_dma_chan *ioat, unsigned long phys_complete)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct list_head *_desc, *n;
+ struct dma_async_tx_descriptor *tx;
+
+ dev_dbg(to_dev(chan), "%s: phys_complete: %lx\n",
+ __func__, phys_complete);
+ list_for_each_safe(_desc, n, &ioat->used_desc) {
+ struct ioat_desc_sw *desc;
+
+ prefetch(n);
+ desc = list_entry(_desc, typeof(*desc), node);
+ tx = &desc->txd;
+ /*
+ * Incoming DMA requests may use multiple descriptors,
+ * due to exceeding xfercap, perhaps. If so, only the
+ * last one will have a cookie, and require unmapping.
+ */
+ dump_desc_dbg(ioat, desc);
+ if (tx->cookie) {
+ chan->completed_cookie = tx->cookie;
+ tx->cookie = 0;
+ ioat_dma_unmap(chan, tx->flags, desc->len, desc->hw);
+ ioat->active -= desc->hw->tx_cnt;
+ if (tx->callback) {
+ tx->callback(tx->callback_param);
+ tx->callback = NULL;
+ }
+ }
+
+ if (tx->phys != phys_complete) {
+ /*
+ * a completed entry, but not the last, so clean
+ * up if the client is done with the descriptor
+ */
+ if (async_tx_test_ack(tx))
+ list_move_tail(&desc->node, &ioat->free_desc);
+ } else {
+ /*
+ * last used desc. Do not remove, so we can
+ * append from it.
+ */
+
+ /* if nothing else is pending, cancel the
+ * completion timeout
+ */
+ if (n == &ioat->used_desc) {
+ dev_dbg(to_dev(chan),
+ "%s cancel completion timeout\n",
+ __func__);
+ clear_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ }
+
+ /* TODO check status bits? */
+ break;
+ }
+ }
+
+ chan->last_completion = phys_complete;
+}
+
+/**
+ * ioat1_cleanup - cleanup up finished descriptors
+ * @chan: ioat channel to be cleaned up
+ *
+ * To prevent lock contention we defer cleanup when the locks are
+ * contended with a terminal timeout that forces cleanup and catches
+ * completion notification errors.
+ */
+static void ioat1_cleanup(struct ioat_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+
+ prefetch(chan->completion);
+
+ if (!spin_trylock_bh(&chan->cleanup_lock))
+ return;
+
+ if (!ioat_cleanup_preamble(chan, &phys_complete)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ if (!spin_trylock_bh(&ioat->desc_lock)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ __cleanup(ioat, phys_complete);
+
+ spin_unlock_bh(&ioat->desc_lock);
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+static void ioat1_timer_event(unsigned long data)
+{
+ struct ioat_dma_chan *ioat = (void *) data;
+ struct ioat_chan_common *chan = &ioat->base;
+
+ dev_dbg(to_dev(chan), "%s: state: %lx\n", __func__, chan->state);
+
+ spin_lock_bh(&chan->cleanup_lock);
+ if (test_and_clear_bit(IOAT_RESET_PENDING, &chan->state)) {
+ struct ioat_desc_sw *desc;
+
+ spin_lock_bh(&ioat->desc_lock);
+
+ /* restart active descriptors */
+ desc = to_ioat_desc(ioat->used_desc.prev);
+ ioat_set_chainaddr(ioat, desc->txd.phys);
+ ioat_start(chan);
+
+ ioat->pending = 0;
+ set_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ spin_unlock_bh(&ioat->desc_lock);
+ } else if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
+ unsigned long phys_complete;
+
+ spin_lock_bh(&ioat->desc_lock);
+ /* if we haven't made progress and we have already
+ * acknowledged a pending completion once, then be more
+ * forceful with a restart
+ */
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+ else if (test_bit(IOAT_COMPLETION_ACK, &chan->state))
+ ioat1_reset_channel(ioat);
+ else {
+ u64 status = ioat_chansts(chan);
+
+ /* manually update the last completion address */
+ if (ioat_chansts_to_addr(status) != 0)
+ *chan->completion = status;
+
+ set_bit(IOAT_COMPLETION_ACK, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ }
+ spin_unlock_bh(&ioat->desc_lock);
+ }
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+static enum dma_status
+ioat1_dma_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+
+ if (ioat_is_complete(c, cookie, done, used) == DMA_SUCCESS)
+ return DMA_SUCCESS;
+
+ ioat1_cleanup(ioat);
+
+ return ioat_is_complete(c, cookie, done, used);
+}
+
+static void ioat1_dma_start_null_desc(struct ioat_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_desc_sw *desc;
+ struct ioat_dma_descriptor *hw;
+
+ spin_lock_bh(&ioat->desc_lock);
+
+ desc = ioat1_dma_get_next_descriptor(ioat);
+
+ if (!desc) {
+ dev_err(to_dev(chan),
+ "Unable to start null desc - get next desc failed\n");
+ spin_unlock_bh(&ioat->desc_lock);
+ return;
+ }
+
+ hw = desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = 1;
+ hw->ctl_f.compl_write = 1;
+ /* set size to non-zero value (channel returns error when size is 0) */
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ hw->src_addr = 0;
+ hw->dst_addr = 0;
+ async_tx_ack(&desc->txd);
+ hw->next = 0;
+ list_add_tail(&desc->node, &ioat->used_desc);
+ dump_desc_dbg(ioat, desc);
+
+ ioat_set_chainaddr(ioat, desc->txd.phys);
+ ioat_start(chan);
+ spin_unlock_bh(&ioat->desc_lock);
+}
+
+/*
+ * Perform a IOAT transaction to verify the HW works.
+ */
+#define IOAT_TEST_SIZE 2000
+
+static void __devinit ioat_dma_test_callback(void *dma_async_param)
+{
+ struct completion *cmp = dma_async_param;
+
+ complete(cmp);
+}
+
+/**
+ * ioat_dma_self_test - Perform a IOAT transaction to verify the HW works.
+ * @device: device to be tested
+ */
+int __devinit ioat_dma_self_test(struct ioatdma_device *device)
+{
+ int i;
+ u8 *src;
+ u8 *dest;
+ struct dma_device *dma = &device->common;
+ struct device *dev = &device->pdev->dev;
+ struct dma_chan *dma_chan;
+ struct dma_async_tx_descriptor *tx;
+ dma_addr_t dma_dest, dma_src;
+ dma_cookie_t cookie;
+ int err = 0;
+ struct completion cmp;
+ unsigned long tmo;
+ unsigned long flags;
+
+ src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
+ if (!src)
+ return -ENOMEM;
+ dest = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
+ if (!dest) {
+ kfree(src);
+ return -ENOMEM;
+ }
+
+ /* Fill in src buffer */
+ for (i = 0; i < IOAT_TEST_SIZE; i++)
+ src[i] = (u8)i;
+
+ /* Start copy, using first DMA channel */
+ dma_chan = container_of(dma->channels.next, struct dma_chan,
+ device_node);
+ if (dma->device_alloc_chan_resources(dma_chan) < 1) {
+ dev_err(dev, "selftest cannot allocate chan resource\n");
+ err = -ENODEV;
+ goto out;
+ }
+
+ dma_src = dma_map_single(dev, src, IOAT_TEST_SIZE, DMA_TO_DEVICE);
+ dma_dest = dma_map_single(dev, dest, IOAT_TEST_SIZE, DMA_FROM_DEVICE);
+ flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE |
+ DMA_PREP_INTERRUPT;
+ tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
+ IOAT_TEST_SIZE, flags);
+ if (!tx) {
+ dev_err(dev, "Self-test prep failed, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test setup failed, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (tmo == 0 ||
+ dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+ != DMA_SUCCESS) {
+ dev_err(dev, "Self-test copy timed out, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ if (memcmp(src, dest, IOAT_TEST_SIZE)) {
+ dev_err(dev, "Self-test copy failed compare, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+free_resources:
+ dma->device_free_chan_resources(dma_chan);
+out:
+ kfree(src);
+ kfree(dest);
+ return err;
+}
+
+static char ioat_interrupt_style[32] = "msix";
+module_param_string(ioat_interrupt_style, ioat_interrupt_style,
+ sizeof(ioat_interrupt_style), 0644);
+MODULE_PARM_DESC(ioat_interrupt_style,
+ "set ioat interrupt style: msix (default), "
+ "msix-single-vector, msi, intx)");
+
+/**
+ * ioat_dma_setup_interrupts - setup interrupt handler
+ * @device: ioat device
+ */
+static int ioat_dma_setup_interrupts(struct ioatdma_device *device)
+{
+ struct ioat_chan_common *chan;
+ struct pci_dev *pdev = device->pdev;
+ struct device *dev = &pdev->dev;
+ struct msix_entry *msix;
+ int i, j, msixcnt;
+ int err = -EINVAL;
+ u8 intrctrl = 0;
+
+ if (!strcmp(ioat_interrupt_style, "msix"))
+ goto msix;
+ if (!strcmp(ioat_interrupt_style, "msix-single-vector"))
+ goto msix_single_vector;
+ if (!strcmp(ioat_interrupt_style, "msi"))
+ goto msi;
+ if (!strcmp(ioat_interrupt_style, "intx"))
+ goto intx;
+ dev_err(dev, "invalid ioat_interrupt_style %s\n", ioat_interrupt_style);
+ goto err_no_irq;
+
+msix:
+ /* The number of MSI-X vectors should equal the number of channels */
+ msixcnt = device->common.chancnt;
+ for (i = 0; i < msixcnt; i++)
+ device->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(pdev, device->msix_entries, msixcnt);
+ if (err < 0)
+ goto msi;
+ if (err > 0)
+ goto msix_single_vector;
+
+ for (i = 0; i < msixcnt; i++) {
+ msix = &device->msix_entries[i];
+ chan = ioat_chan_by_index(device, i);
+ err = devm_request_irq(dev, msix->vector,
+ ioat_dma_do_interrupt_msix, 0,
+ "ioat-msix", chan);
+ if (err) {
+ for (j = 0; j < i; j++) {
+ msix = &device->msix_entries[j];
+ chan = ioat_chan_by_index(device, j);
+ devm_free_irq(dev, msix->vector, chan);
+ }
+ goto msix_single_vector;
+ }
+ }
+ intrctrl |= IOAT_INTRCTRL_MSIX_VECTOR_CONTROL;
+ goto done;
+
+msix_single_vector:
+ msix = &device->msix_entries[0];
+ msix->entry = 0;
+ err = pci_enable_msix(pdev, device->msix_entries, 1);
+ if (err)
+ goto msi;
+
+ err = devm_request_irq(dev, msix->vector, ioat_dma_do_interrupt, 0,
+ "ioat-msix", device);
+ if (err) {
+ pci_disable_msix(pdev);
+ goto msi;
+ }
+ goto done;
+
+msi:
+ err = pci_enable_msi(pdev);
+ if (err)
+ goto intx;
+
+ err = devm_request_irq(dev, pdev->irq, ioat_dma_do_interrupt, 0,
+ "ioat-msi", device);
+ if (err) {
+ pci_disable_msi(pdev);
+ goto intx;
+ }
+ goto done;
+
+intx:
+ err = devm_request_irq(dev, pdev->irq, ioat_dma_do_interrupt,
+ IRQF_SHARED, "ioat-intx", device);
+ if (err)
+ goto err_no_irq;
+
+done:
+ if (device->intr_quirk)
+ device->intr_quirk(device);
+ intrctrl |= IOAT_INTRCTRL_MASTER_INT_EN;
+ writeb(intrctrl, device->reg_base + IOAT_INTRCTRL_OFFSET);
+ return 0;
+
+err_no_irq:
+ /* Disable all interrupt generation */
+ writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
+ dev_err(dev, "no usable interrupts\n");
+ return err;
+}
+
+static void ioat_disable_interrupts(struct ioatdma_device *device)
+{
+ /* Disable all interrupt generation */
+ writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
+}
+
+int __devinit ioat_probe(struct ioatdma_device *device)
+{
+ int err = -ENODEV;
+ struct dma_device *dma = &device->common;
+ struct pci_dev *pdev = device->pdev;
+ struct device *dev = &pdev->dev;
+
+ /* DMA coherent memory pool for DMA descriptor allocations */
+ device->dma_pool = pci_pool_create("dma_desc_pool", pdev,
+ sizeof(struct ioat_dma_descriptor),
+ 64, 0);
+ if (!device->dma_pool) {
+ err = -ENOMEM;
+ goto err_dma_pool;
+ }
+
+ device->completion_pool = pci_pool_create("completion_pool", pdev,
+ sizeof(u64), SMP_CACHE_BYTES,
+ SMP_CACHE_BYTES);
+
+ if (!device->completion_pool) {
+ err = -ENOMEM;
+ goto err_completion_pool;
+ }
+
+ device->enumerate_channels(device);
+
+ dma_cap_set(DMA_MEMCPY, dma->cap_mask);
+ dma->dev = &pdev->dev;
+
+ if (!dma->chancnt) {
+ dev_err(dev, "zero channels detected\n");
+ goto err_setup_interrupts;
+ }
+
+ err = ioat_dma_setup_interrupts(device);
+ if (err)
+ goto err_setup_interrupts;
+
+ err = device->self_test(device);
+ if (err)
+ goto err_self_test;
+
+ return 0;
+
+err_self_test:
+ ioat_disable_interrupts(device);
+err_setup_interrupts:
+ pci_pool_destroy(device->completion_pool);
+err_completion_pool:
+ pci_pool_destroy(device->dma_pool);
+err_dma_pool:
+ return err;
+}
+
+int __devinit ioat_register(struct ioatdma_device *device)
+{
+ int err = dma_async_device_register(&device->common);
+
+ if (err) {
+ ioat_disable_interrupts(device);
+ pci_pool_destroy(device->completion_pool);
+ pci_pool_destroy(device->dma_pool);
+ }
+
+ return err;
+}
+
+/* ioat1_intr_quirk - fix up dma ctrl register to enable / disable msi */
+static void ioat1_intr_quirk(struct ioatdma_device *device)
+{
+ struct pci_dev *pdev = device->pdev;
+ u32 dmactrl;
+
+ pci_read_config_dword(pdev, IOAT_PCI_DMACTRL_OFFSET, &dmactrl);
+ if (pdev->msi_enabled)
+ dmactrl |= IOAT_PCI_DMACTRL_MSI_EN;
+ else
+ dmactrl &= ~IOAT_PCI_DMACTRL_MSI_EN;
+ pci_write_config_dword(pdev, IOAT_PCI_DMACTRL_OFFSET, dmactrl);
+}
+
+static ssize_t ring_size_show(struct dma_chan *c, char *page)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+
+ return sprintf(page, "%d\n", ioat->desccount);
+}
+static struct ioat_sysfs_entry ring_size_attr = __ATTR_RO(ring_size);
+
+static ssize_t ring_active_show(struct dma_chan *c, char *page)
+{
+ struct ioat_dma_chan *ioat = to_ioat_chan(c);
+
+ return sprintf(page, "%d\n", ioat->active);
+}
+static struct ioat_sysfs_entry ring_active_attr = __ATTR_RO(ring_active);
+
+static ssize_t cap_show(struct dma_chan *c, char *page)
+{
+ struct dma_device *dma = c->device;
+
+ return sprintf(page, "copy%s%s%s%s%s%s\n",
+ dma_has_cap(DMA_PQ, dma->cap_mask) ? " pq" : "",
+ dma_has_cap(DMA_PQ_VAL, dma->cap_mask) ? " pq_val" : "",
+ dma_has_cap(DMA_XOR, dma->cap_mask) ? " xor" : "",
+ dma_has_cap(DMA_XOR_VAL, dma->cap_mask) ? " xor_val" : "",
+ dma_has_cap(DMA_MEMSET, dma->cap_mask) ? " fill" : "",
+ dma_has_cap(DMA_INTERRUPT, dma->cap_mask) ? " intr" : "");
+
+}
+struct ioat_sysfs_entry ioat_cap_attr = __ATTR_RO(cap);
+
+static ssize_t version_show(struct dma_chan *c, char *page)
+{
+ struct dma_device *dma = c->device;
+ struct ioatdma_device *device = to_ioatdma_device(dma);
+
+ return sprintf(page, "%d.%d\n",
+ device->version >> 4, device->version & 0xf);
+}
+struct ioat_sysfs_entry ioat_version_attr = __ATTR_RO(version);
+
+static struct attribute *ioat1_attrs[] = {
+ &ring_size_attr.attr,
+ &ring_active_attr.attr,
+ &ioat_cap_attr.attr,
+ &ioat_version_attr.attr,
+ NULL,
+};
+
+static ssize_t
+ioat_attr_show(struct kobject *kobj, struct attribute *attr, char *page)
+{
+ struct ioat_sysfs_entry *entry;
+ struct ioat_chan_common *chan;
+
+ entry = container_of(attr, struct ioat_sysfs_entry, attr);
+ chan = container_of(kobj, struct ioat_chan_common, kobj);
+
+ if (!entry->show)
+ return -EIO;
+ return entry->show(&chan->common, page);
+}
+
+struct sysfs_ops ioat_sysfs_ops = {
+ .show = ioat_attr_show,
+};
+
+static struct kobj_type ioat1_ktype = {
+ .sysfs_ops = &ioat_sysfs_ops,
+ .default_attrs = ioat1_attrs,
+};
+
+void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type)
+{
+ struct dma_device *dma = &device->common;
+ struct dma_chan *c;
+
+ list_for_each_entry(c, &dma->channels, device_node) {
+ struct ioat_chan_common *chan = to_chan_common(c);
+ struct kobject *parent = &c->dev->device.kobj;
+ int err;
+
+ err = kobject_init_and_add(&chan->kobj, type, parent, "quickdata");
+ if (err) {
+ dev_warn(to_dev(chan),
+ "sysfs init error (%d), continuing...\n", err);
+ kobject_put(&chan->kobj);
+ set_bit(IOAT_KOBJ_INIT_FAIL, &chan->state);
+ }
+ }
+}
+
+void ioat_kobject_del(struct ioatdma_device *device)
+{
+ struct dma_device *dma = &device->common;
+ struct dma_chan *c;
+
+ list_for_each_entry(c, &dma->channels, device_node) {
+ struct ioat_chan_common *chan = to_chan_common(c);
+
+ if (!test_bit(IOAT_KOBJ_INIT_FAIL, &chan->state)) {
+ kobject_del(&chan->kobj);
+ kobject_put(&chan->kobj);
+ }
+ }
+}
+
+int __devinit ioat1_dma_probe(struct ioatdma_device *device, int dca)
+{
+ struct pci_dev *pdev = device->pdev;
+ struct dma_device *dma;
+ int err;
+
+ device->intr_quirk = ioat1_intr_quirk;
+ device->enumerate_channels = ioat1_enumerate_channels;
+ device->self_test = ioat_dma_self_test;
+ dma = &device->common;
+ dma->device_prep_dma_memcpy = ioat1_dma_prep_memcpy;
+ dma->device_issue_pending = ioat1_dma_memcpy_issue_pending;
+ dma->device_alloc_chan_resources = ioat1_dma_alloc_chan_resources;
+ dma->device_free_chan_resources = ioat1_dma_free_chan_resources;
+ dma->device_is_tx_complete = ioat1_dma_is_complete;
+
+ err = ioat_probe(device);
+ if (err)
+ return err;
+ ioat_set_tcp_copy_break(4096);
+ err = ioat_register(device);
+ if (err)
+ return err;
+ ioat_kobject_add(device, &ioat1_ktype);
+
+ if (dca)
+ device->dca = ioat_dca_init(pdev, device->reg_base);
+
+ return err;
+}
+
+void __devexit ioat_dma_remove(struct ioatdma_device *device)
+{
+ struct dma_device *dma = &device->common;
+
+ ioat_disable_interrupts(device);
+
+ ioat_kobject_del(device);
+
+ dma_async_device_unregister(dma);
+
+ pci_pool_destroy(device->dma_pool);
+ pci_pool_destroy(device->completion_pool);
+
+ INIT_LIST_HEAD(&dma->channels);
+}
--- /dev/null
+/*
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef IOATDMA_H
+#define IOATDMA_H
+
+#include <linux/dmaengine.h>
+#include "hw.h"
+#include "registers.h"
+#include <linux/init.h>
+#include <linux/dmapool.h>
+#include <linux/cache.h>
+#include <linux/pci_ids.h>
+#include <net/tcp.h>
+
+#define IOAT_DMA_VERSION "4.00"
+
+#define IOAT_LOW_COMPLETION_MASK 0xffffffc0
+#define IOAT_DMA_DCA_ANY_CPU ~0
+
+#define to_ioatdma_device(dev) container_of(dev, struct ioatdma_device, common)
+#define to_ioat_desc(lh) container_of(lh, struct ioat_desc_sw, node)
+#define tx_to_ioat_desc(tx) container_of(tx, struct ioat_desc_sw, txd)
+#define to_dev(ioat_chan) (&(ioat_chan)->device->pdev->dev)
+
+#define chan_num(ch) ((int)((ch)->reg_base - (ch)->device->reg_base) / 0x80)
+
+/*
+ * workaround for IOAT ver.3.0 null descriptor issue
+ * (channel returns error when size is 0)
+ */
+#define NULL_DESC_BUFFER_SIZE 1
+
+/**
+ * struct ioatdma_device - internal representation of a IOAT device
+ * @pdev: PCI-Express device
+ * @reg_base: MMIO register space base address
+ * @dma_pool: for allocating DMA descriptors
+ * @common: embedded struct dma_device
+ * @version: version of ioatdma device
+ * @msix_entries: irq handlers
+ * @idx: per channel data
+ * @dca: direct cache access context
+ * @intr_quirk: interrupt setup quirk (for ioat_v1 devices)
+ * @enumerate_channels: hw version specific channel enumeration
+ * @cleanup_tasklet: select between the v2 and v3 cleanup routines
+ * @timer_fn: select between the v2 and v3 timer watchdog routines
+ * @self_test: hardware version specific self test for each supported op type
+ *
+ * Note: the v3 cleanup routine supports raid operations
+ */
+struct ioatdma_device {
+ struct pci_dev *pdev;
+ void __iomem *reg_base;
+ struct pci_pool *dma_pool;
+ struct pci_pool *completion_pool;
+ struct dma_device common;
+ u8 version;
+ struct msix_entry msix_entries[4];
+ struct ioat_chan_common *idx[4];
+ struct dca_provider *dca;
+ void (*intr_quirk)(struct ioatdma_device *device);
+ int (*enumerate_channels)(struct ioatdma_device *device);
+ void (*cleanup_tasklet)(unsigned long data);
+ void (*timer_fn)(unsigned long data);
+ int (*self_test)(struct ioatdma_device *device);
+};
+
+struct ioat_chan_common {
+ struct dma_chan common;
+ void __iomem *reg_base;
+ unsigned long last_completion;
+ spinlock_t cleanup_lock;
+ dma_cookie_t completed_cookie;
+ unsigned long state;
+ #define IOAT_COMPLETION_PENDING 0
+ #define IOAT_COMPLETION_ACK 1
+ #define IOAT_RESET_PENDING 2
+ #define IOAT_KOBJ_INIT_FAIL 3
+ struct timer_list timer;
+ #define COMPLETION_TIMEOUT msecs_to_jiffies(100)
+ #define IDLE_TIMEOUT msecs_to_jiffies(2000)
+ #define RESET_DELAY msecs_to_jiffies(100)
+ struct ioatdma_device *device;
+ dma_addr_t completion_dma;
+ u64 *completion;
+ struct tasklet_struct cleanup_task;
+ struct kobject kobj;
+};
+
+struct ioat_sysfs_entry {
+ struct attribute attr;
+ ssize_t (*show)(struct dma_chan *, char *);
+};
+
+/**
+ * struct ioat_dma_chan - internal representation of a DMA channel
+ */
+struct ioat_dma_chan {
+ struct ioat_chan_common base;
+
+ size_t xfercap; /* XFERCAP register value expanded out */
+
+ spinlock_t desc_lock;
+ struct list_head free_desc;
+ struct list_head used_desc;
+
+ int pending;
+ u16 desccount;
+ u16 active;
+};
+
+static inline struct ioat_chan_common *to_chan_common(struct dma_chan *c)
+{
+ return container_of(c, struct ioat_chan_common, common);
+}
+
+static inline struct ioat_dma_chan *to_ioat_chan(struct dma_chan *c)
+{
+ struct ioat_chan_common *chan = to_chan_common(c);
+
+ return container_of(chan, struct ioat_dma_chan, base);
+}
+
+/**
+ * ioat_is_complete - poll the status of an ioat transaction
+ * @c: channel handle
+ * @cookie: transaction identifier
+ * @done: if set, updated with last completed transaction
+ * @used: if set, updated with last used transaction
+ */
+static inline enum dma_status
+ioat_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct ioat_chan_common *chan = to_chan_common(c);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+
+ last_used = c->cookie;
+ last_complete = chan->completed_cookie;
+
+ if (done)
+ *done = last_complete;
+ if (used)
+ *used = last_used;
+
+ return dma_async_is_complete(cookie, last_complete, last_used);
+}
+
+/* wrapper around hardware descriptor format + additional software fields */
+
+/**
+ * struct ioat_desc_sw - wrapper around hardware descriptor
+ * @hw: hardware DMA descriptor (for memcpy)
+ * @node: this descriptor will either be on the free list,
+ * or attached to a transaction list (tx_list)
+ * @txd: the generic software descriptor for all engines
+ * @id: identifier for debug
+ */
+struct ioat_desc_sw {
+ struct ioat_dma_descriptor *hw;
+ struct list_head node;
+ size_t len;
+ struct list_head tx_list;
+ struct dma_async_tx_descriptor txd;
+ #ifdef DEBUG
+ int id;
+ #endif
+};
+
+#ifdef DEBUG
+#define set_desc_id(desc, i) ((desc)->id = (i))
+#define desc_id(desc) ((desc)->id)
+#else
+#define set_desc_id(desc, i)
+#define desc_id(desc) (0)
+#endif
+
+static inline void
+__dump_desc_dbg(struct ioat_chan_common *chan, struct ioat_dma_descriptor *hw,
+ struct dma_async_tx_descriptor *tx, int id)
+{
+ struct device *dev = to_dev(chan);
+
+ dev_dbg(dev, "desc[%d]: (%#llx->%#llx) cookie: %d flags: %#x"
+ " ctl: %#x (op: %d int_en: %d compl: %d)\n", id,
+ (unsigned long long) tx->phys,
+ (unsigned long long) hw->next, tx->cookie, tx->flags,
+ hw->ctl, hw->ctl_f.op, hw->ctl_f.int_en, hw->ctl_f.compl_write);
+}
+
+#define dump_desc_dbg(c, d) \
+ ({ if (d) __dump_desc_dbg(&c->base, d->hw, &d->txd, desc_id(d)); 0; })
+
+static inline void ioat_set_tcp_copy_break(unsigned long copybreak)
+{
+ #ifdef CONFIG_NET_DMA
+ sysctl_tcp_dma_copybreak = copybreak;
+ #endif
+}
+
+static inline struct ioat_chan_common *
+ioat_chan_by_index(struct ioatdma_device *device, int index)
+{
+ return device->idx[index];
+}
+
+static inline u64 ioat_chansts(struct ioat_chan_common *chan)
+{
+ u8 ver = chan->device->version;
+ u64 status;
+ u32 status_lo;
+
+ /* We need to read the low address first as this causes the
+ * chipset to latch the upper bits for the subsequent read
+ */
+ status_lo = readl(chan->reg_base + IOAT_CHANSTS_OFFSET_LOW(ver));
+ status = readl(chan->reg_base + IOAT_CHANSTS_OFFSET_HIGH(ver));
+ status <<= 32;
+ status |= status_lo;
+
+ return status;
+}
+
+static inline void ioat_start(struct ioat_chan_common *chan)
+{
+ u8 ver = chan->device->version;
+
+ writeb(IOAT_CHANCMD_START, chan->reg_base + IOAT_CHANCMD_OFFSET(ver));
+}
+
+static inline u64 ioat_chansts_to_addr(u64 status)
+{
+ return status & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
+}
+
+static inline u32 ioat_chanerr(struct ioat_chan_common *chan)
+{
+ return readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+}
+
+static inline void ioat_suspend(struct ioat_chan_common *chan)
+{
+ u8 ver = chan->device->version;
+
+ writeb(IOAT_CHANCMD_SUSPEND, chan->reg_base + IOAT_CHANCMD_OFFSET(ver));
+}
+
+static inline void ioat_set_chainaddr(struct ioat_dma_chan *ioat, u64 addr)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+
+ writel(addr & 0x00000000FFFFFFFF,
+ chan->reg_base + IOAT1_CHAINADDR_OFFSET_LOW);
+ writel(addr >> 32,
+ chan->reg_base + IOAT1_CHAINADDR_OFFSET_HIGH);
+}
+
+static inline bool is_ioat_active(unsigned long status)
+{
+ return ((status & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_ACTIVE);
+}
+
+static inline bool is_ioat_idle(unsigned long status)
+{
+ return ((status & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_DONE);
+}
+
+static inline bool is_ioat_halted(unsigned long status)
+{
+ return ((status & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_HALTED);
+}
+
+static inline bool is_ioat_suspended(unsigned long status)
+{
+ return ((status & IOAT_CHANSTS_STATUS) == IOAT_CHANSTS_SUSPENDED);
+}
+
+/* channel was fatally programmed */
+static inline bool is_ioat_bug(unsigned long err)
+{
+ return !!(err & (IOAT_CHANERR_SRC_ADDR_ERR|IOAT_CHANERR_DEST_ADDR_ERR|
+ IOAT_CHANERR_NEXT_ADDR_ERR|IOAT_CHANERR_CONTROL_ERR|
+ IOAT_CHANERR_LENGTH_ERR));
+}
+
+static inline void ioat_unmap(struct pci_dev *pdev, dma_addr_t addr, size_t len,
+ int direction, enum dma_ctrl_flags flags, bool dst)
+{
+ if ((dst && (flags & DMA_COMPL_DEST_UNMAP_SINGLE)) ||
+ (!dst && (flags & DMA_COMPL_SRC_UNMAP_SINGLE)))
+ pci_unmap_single(pdev, addr, len, direction);
+ else
+ pci_unmap_page(pdev, addr, len, direction);
+}
+
+int __devinit ioat_probe(struct ioatdma_device *device);
+int __devinit ioat_register(struct ioatdma_device *device);
+int __devinit ioat1_dma_probe(struct ioatdma_device *dev, int dca);
+int __devinit ioat_dma_self_test(struct ioatdma_device *device);
+void __devexit ioat_dma_remove(struct ioatdma_device *device);
+struct dca_provider * __devinit ioat_dca_init(struct pci_dev *pdev,
+ void __iomem *iobase);
+unsigned long ioat_get_current_completion(struct ioat_chan_common *chan);
+void ioat_init_channel(struct ioatdma_device *device,
+ struct ioat_chan_common *chan, int idx,
+ void (*timer_fn)(unsigned long),
+ void (*tasklet)(unsigned long),
+ unsigned long ioat);
+void ioat_dma_unmap(struct ioat_chan_common *chan, enum dma_ctrl_flags flags,
+ size_t len, struct ioat_dma_descriptor *hw);
+bool ioat_cleanup_preamble(struct ioat_chan_common *chan,
+ unsigned long *phys_complete);
+void ioat_kobject_add(struct ioatdma_device *device, struct kobj_type *type);
+void ioat_kobject_del(struct ioatdma_device *device);
+extern struct sysfs_ops ioat_sysfs_ops;
+extern struct ioat_sysfs_entry ioat_version_attr;
+extern struct ioat_sysfs_entry ioat_cap_attr;
+#endif /* IOATDMA_H */
--- /dev/null
+/*
+ * Intel I/OAT DMA Linux driver
+ * Copyright(c) 2004 - 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+/*
+ * This driver supports an Intel I/OAT DMA engine (versions >= 2), which
+ * does asynchronous data movement and checksumming operations.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/workqueue.h>
+#include <linux/i7300_idle.h>
+#include "dma.h"
+#include "dma_v2.h"
+#include "registers.h"
+#include "hw.h"
+
+int ioat_ring_alloc_order = 8;
+module_param(ioat_ring_alloc_order, int, 0644);
+MODULE_PARM_DESC(ioat_ring_alloc_order,
+ "ioat2+: allocate 2^n descriptors per channel"
+ " (default: 8 max: 16)");
+static int ioat_ring_max_alloc_order = IOAT_MAX_ORDER;
+module_param(ioat_ring_max_alloc_order, int, 0644);
+MODULE_PARM_DESC(ioat_ring_max_alloc_order,
+ "ioat2+: upper limit for ring size (default: 16)");
+
+void __ioat2_issue_pending(struct ioat2_dma_chan *ioat)
+{
+ void * __iomem reg_base = ioat->base.reg_base;
+
+ ioat->pending = 0;
+ ioat->dmacount += ioat2_ring_pending(ioat);
+ ioat->issued = ioat->head;
+ /* make descriptor updates globally visible before notifying channel */
+ wmb();
+ writew(ioat->dmacount, reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
+ dev_dbg(to_dev(&ioat->base),
+ "%s: head: %#x tail: %#x issued: %#x count: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued, ioat->dmacount);
+}
+
+void ioat2_issue_pending(struct dma_chan *chan)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(chan);
+
+ spin_lock_bh(&ioat->ring_lock);
+ if (ioat->pending == 1)
+ __ioat2_issue_pending(ioat);
+ spin_unlock_bh(&ioat->ring_lock);
+}
+
+/**
+ * ioat2_update_pending - log pending descriptors
+ * @ioat: ioat2+ channel
+ *
+ * set pending to '1' unless pending is already set to '2', pending == 2
+ * indicates that submission is temporarily blocked due to an in-flight
+ * reset. If we are already above the ioat_pending_level threshold then
+ * just issue pending.
+ *
+ * called with ring_lock held
+ */
+static void ioat2_update_pending(struct ioat2_dma_chan *ioat)
+{
+ if (unlikely(ioat->pending == 2))
+ return;
+ else if (ioat2_ring_pending(ioat) > ioat_pending_level)
+ __ioat2_issue_pending(ioat);
+ else
+ ioat->pending = 1;
+}
+
+static void __ioat2_start_null_desc(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_ring_ent *desc;
+ struct ioat_dma_descriptor *hw;
+ int idx;
+
+ if (ioat2_ring_space(ioat) < 1) {
+ dev_err(to_dev(&ioat->base),
+ "Unable to start null desc - ring full\n");
+ return;
+ }
+
+ dev_dbg(to_dev(&ioat->base), "%s: head: %#x tail: %#x issued: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued);
+ idx = ioat2_desc_alloc(ioat, 1);
+ desc = ioat2_get_ring_ent(ioat, idx);
+
+ hw = desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = 1;
+ hw->ctl_f.compl_write = 1;
+ /* set size to non-zero value (channel returns error when size is 0) */
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ hw->src_addr = 0;
+ hw->dst_addr = 0;
+ async_tx_ack(&desc->txd);
+ ioat2_set_chainaddr(ioat, desc->txd.phys);
+ dump_desc_dbg(ioat, desc);
+ __ioat2_issue_pending(ioat);
+}
+
+static void ioat2_start_null_desc(struct ioat2_dma_chan *ioat)
+{
+ spin_lock_bh(&ioat->ring_lock);
+ __ioat2_start_null_desc(ioat);
+ spin_unlock_bh(&ioat->ring_lock);
+}
+
+static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct dma_async_tx_descriptor *tx;
+ struct ioat_ring_ent *desc;
+ bool seen_current = false;
+ u16 active;
+ int i;
+
+ dev_dbg(to_dev(chan), "%s: head: %#x tail: %#x issued: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued);
+
+ active = ioat2_ring_active(ioat);
+ for (i = 0; i < active && !seen_current; i++) {
+ prefetch(ioat2_get_ring_ent(ioat, ioat->tail + i + 1));
+ desc = ioat2_get_ring_ent(ioat, ioat->tail + i);
+ tx = &desc->txd;
+ dump_desc_dbg(ioat, desc);
+ if (tx->cookie) {
+ ioat_dma_unmap(chan, tx->flags, desc->len, desc->hw);
+ chan->completed_cookie = tx->cookie;
+ tx->cookie = 0;
+ if (tx->callback) {
+ tx->callback(tx->callback_param);
+ tx->callback = NULL;
+ }
+ }
+
+ if (tx->phys == phys_complete)
+ seen_current = true;
+ }
+ ioat->tail += i;
+ BUG_ON(!seen_current); /* no active descs have written a completion? */
+
+ chan->last_completion = phys_complete;
+ if (ioat->head == ioat->tail) {
+ dev_dbg(to_dev(chan), "%s: cancel completion timeout\n",
+ __func__);
+ clear_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT);
+ }
+}
+
+/**
+ * ioat2_cleanup - clean finished descriptors (advance tail pointer)
+ * @chan: ioat channel to be cleaned up
+ */
+static void ioat2_cleanup(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+
+ prefetch(chan->completion);
+
+ if (!spin_trylock_bh(&chan->cleanup_lock))
+ return;
+
+ if (!ioat_cleanup_preamble(chan, &phys_complete)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ if (!spin_trylock_bh(&ioat->ring_lock)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ __cleanup(ioat, phys_complete);
+
+ spin_unlock_bh(&ioat->ring_lock);
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+void ioat2_cleanup_tasklet(unsigned long data)
+{
+ struct ioat2_dma_chan *ioat = (void *) data;
+
+ ioat2_cleanup(ioat);
+ writew(IOAT_CHANCTRL_RUN, ioat->base.reg_base + IOAT_CHANCTRL_OFFSET);
+}
+
+void __ioat2_restart_chan(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+
+ /* set the tail to be re-issued */
+ ioat->issued = ioat->tail;
+ ioat->dmacount = 0;
+ set_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+
+ dev_dbg(to_dev(chan),
+ "%s: head: %#x tail: %#x issued: %#x count: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued, ioat->dmacount);
+
+ if (ioat2_ring_pending(ioat)) {
+ struct ioat_ring_ent *desc;
+
+ desc = ioat2_get_ring_ent(ioat, ioat->tail);
+ ioat2_set_chainaddr(ioat, desc->txd.phys);
+ __ioat2_issue_pending(ioat);
+ } else
+ __ioat2_start_null_desc(ioat);
+}
+
+static void ioat2_restart_channel(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+ u32 status;
+
+ status = ioat_chansts(chan);
+ if (is_ioat_active(status) || is_ioat_idle(status))
+ ioat_suspend(chan);
+ while (is_ioat_active(status) || is_ioat_idle(status)) {
+ status = ioat_chansts(chan);
+ cpu_relax();
+ }
+
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+
+ __ioat2_restart_chan(ioat);
+}
+
+void ioat2_timer_event(unsigned long data)
+{
+ struct ioat2_dma_chan *ioat = (void *) data;
+ struct ioat_chan_common *chan = &ioat->base;
+
+ spin_lock_bh(&chan->cleanup_lock);
+ if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
+ unsigned long phys_complete;
+ u64 status;
+
+ spin_lock_bh(&ioat->ring_lock);
+ status = ioat_chansts(chan);
+
+ /* when halted due to errors check for channel
+ * programming errors before advancing the completion state
+ */
+ if (is_ioat_halted(status)) {
+ u32 chanerr;
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ BUG_ON(is_ioat_bug(chanerr));
+ }
+
+ /* if we haven't made progress and we have already
+ * acknowledged a pending completion once, then be more
+ * forceful with a restart
+ */
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+ else if (test_bit(IOAT_COMPLETION_ACK, &chan->state))
+ ioat2_restart_channel(ioat);
+ else {
+ set_bit(IOAT_COMPLETION_ACK, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ }
+ spin_unlock_bh(&ioat->ring_lock);
+ } else {
+ u16 active;
+
+ /* if the ring is idle, empty, and oversized try to step
+ * down the size
+ */
+ spin_lock_bh(&ioat->ring_lock);
+ active = ioat2_ring_active(ioat);
+ if (active == 0 && ioat->alloc_order > ioat_get_alloc_order())
+ reshape_ring(ioat, ioat->alloc_order-1);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ /* keep shrinking until we get back to our minimum
+ * default size
+ */
+ if (ioat->alloc_order > ioat_get_alloc_order())
+ mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT);
+ }
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+/**
+ * ioat2_enumerate_channels - find and initialize the device's channels
+ * @device: the device to be enumerated
+ */
+int ioat2_enumerate_channels(struct ioatdma_device *device)
+{
+ struct ioat2_dma_chan *ioat;
+ struct device *dev = &device->pdev->dev;
+ struct dma_device *dma = &device->common;
+ u8 xfercap_log;
+ int i;
+
+ INIT_LIST_HEAD(&dma->channels);
+ dma->chancnt = readb(device->reg_base + IOAT_CHANCNT_OFFSET);
+ dma->chancnt &= 0x1f; /* bits [4:0] valid */
+ if (dma->chancnt > ARRAY_SIZE(device->idx)) {
+ dev_warn(dev, "(%d) exceeds max supported channels (%zu)\n",
+ dma->chancnt, ARRAY_SIZE(device->idx));
+ dma->chancnt = ARRAY_SIZE(device->idx);
+ }
+ xfercap_log = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
+ xfercap_log &= 0x1f; /* bits [4:0] valid */
+ if (xfercap_log == 0)
+ return 0;
+ dev_dbg(dev, "%s: xfercap = %d\n", __func__, 1 << xfercap_log);
+
+ /* FIXME which i/oat version is i7300? */
+#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
+ if (i7300_idle_platform_probe(NULL, NULL, 1) == 0)
+ dma->chancnt--;
+#endif
+ for (i = 0; i < dma->chancnt; i++) {
+ ioat = devm_kzalloc(dev, sizeof(*ioat), GFP_KERNEL);
+ if (!ioat)
+ break;
+
+ ioat_init_channel(device, &ioat->base, i,
+ device->timer_fn,
+ device->cleanup_tasklet,
+ (unsigned long) ioat);
+ ioat->xfercap_log = xfercap_log;
+ spin_lock_init(&ioat->ring_lock);
+ }
+ dma->chancnt = i;
+ return i;
+}
+
+static dma_cookie_t ioat2_tx_submit_unlock(struct dma_async_tx_descriptor *tx)
+{
+ struct dma_chan *c = tx->chan;
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ dma_cookie_t cookie = c->cookie;
+
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
+ tx->cookie = cookie;
+ c->cookie = cookie;
+ dev_dbg(to_dev(&ioat->base), "%s: cookie: %d\n", __func__, cookie);
+
+ if (!test_and_set_bit(IOAT_COMPLETION_PENDING, &chan->state))
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ ioat2_update_pending(ioat);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ return cookie;
+}
+
+static struct ioat_ring_ent *ioat2_alloc_ring_ent(struct dma_chan *chan, gfp_t flags)
+{
+ struct ioat_dma_descriptor *hw;
+ struct ioat_ring_ent *desc;
+ struct ioatdma_device *dma;
+ dma_addr_t phys;
+
+ dma = to_ioatdma_device(chan->device);
+ hw = pci_pool_alloc(dma->dma_pool, flags, &phys);
+ if (!hw)
+ return NULL;
+ memset(hw, 0, sizeof(*hw));
+
+ desc = kmem_cache_alloc(ioat2_cache, flags);
+ if (!desc) {
+ pci_pool_free(dma->dma_pool, hw, phys);
+ return NULL;
+ }
+ memset(desc, 0, sizeof(*desc));
+
+ dma_async_tx_descriptor_init(&desc->txd, chan);
+ desc->txd.tx_submit = ioat2_tx_submit_unlock;
+ desc->hw = hw;
+ desc->txd.phys = phys;
+ return desc;
+}
+
+static void ioat2_free_ring_ent(struct ioat_ring_ent *desc, struct dma_chan *chan)
+{
+ struct ioatdma_device *dma;
+
+ dma = to_ioatdma_device(chan->device);
+ pci_pool_free(dma->dma_pool, desc->hw, desc->txd.phys);
+ kmem_cache_free(ioat2_cache, desc);
+}
+
+static struct ioat_ring_ent **ioat2_alloc_ring(struct dma_chan *c, int order, gfp_t flags)
+{
+ struct ioat_ring_ent **ring;
+ int descs = 1 << order;
+ int i;
+
+ if (order > ioat_get_max_alloc_order())
+ return NULL;
+
+ /* allocate the array to hold the software ring */
+ ring = kcalloc(descs, sizeof(*ring), flags);
+ if (!ring)
+ return NULL;
+ for (i = 0; i < descs; i++) {
+ ring[i] = ioat2_alloc_ring_ent(c, flags);
+ if (!ring[i]) {
+ while (i--)
+ ioat2_free_ring_ent(ring[i], c);
+ kfree(ring);
+ return NULL;
+ }
+ set_desc_id(ring[i], i);
+ }
+
+ /* link descs */
+ for (i = 0; i < descs-1; i++) {
+ struct ioat_ring_ent *next = ring[i+1];
+ struct ioat_dma_descriptor *hw = ring[i]->hw;
+
+ hw->next = next->txd.phys;
+ }
+ ring[i]->hw->next = ring[0]->txd.phys;
+
+ return ring;
+}
+
+/* ioat2_alloc_chan_resources - allocate/initialize ioat2 descriptor ring
+ * @chan: channel to be initialized
+ */
+int ioat2_alloc_chan_resources(struct dma_chan *c)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_ring_ent **ring;
+ u32 chanerr;
+ int order;
+
+ /* have we already been set up? */
+ if (ioat->ring)
+ return 1 << ioat->alloc_order;
+
+ /* Setup register to interrupt and write completion status on error */
+ writew(IOAT_CHANCTRL_RUN, chan->reg_base + IOAT_CHANCTRL_OFFSET);
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ if (chanerr) {
+ dev_err(to_dev(chan), "CHANERR = %x, clearing\n", chanerr);
+ writel(chanerr, chan->reg_base + IOAT_CHANERR_OFFSET);
+ }
+
+ /* allocate a completion writeback area */
+ /* doing 2 32bit writes to mmio since 1 64b write doesn't work */
+ chan->completion = pci_pool_alloc(chan->device->completion_pool,
+ GFP_KERNEL, &chan->completion_dma);
+ if (!chan->completion)
+ return -ENOMEM;
+
+ memset(chan->completion, 0, sizeof(*chan->completion));
+ writel(((u64) chan->completion_dma) & 0x00000000FFFFFFFF,
+ chan->reg_base + IOAT_CHANCMP_OFFSET_LOW);
+ writel(((u64) chan->completion_dma) >> 32,
+ chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH);
+
+ order = ioat_get_alloc_order();
+ ring = ioat2_alloc_ring(c, order, GFP_KERNEL);
+ if (!ring)
+ return -ENOMEM;
+
+ spin_lock_bh(&ioat->ring_lock);
+ ioat->ring = ring;
+ ioat->head = 0;
+ ioat->issued = 0;
+ ioat->tail = 0;
+ ioat->pending = 0;
+ ioat->alloc_order = order;
+ spin_unlock_bh(&ioat->ring_lock);
+
+ tasklet_enable(&chan->cleanup_task);
+ ioat2_start_null_desc(ioat);
+
+ return 1 << ioat->alloc_order;
+}
+
+bool reshape_ring(struct ioat2_dma_chan *ioat, int order)
+{
+ /* reshape differs from normal ring allocation in that we want
+ * to allocate a new software ring while only
+ * extending/truncating the hardware ring
+ */
+ struct ioat_chan_common *chan = &ioat->base;
+ struct dma_chan *c = &chan->common;
+ const u16 curr_size = ioat2_ring_mask(ioat) + 1;
+ const u16 active = ioat2_ring_active(ioat);
+ const u16 new_size = 1 << order;
+ struct ioat_ring_ent **ring;
+ u16 i;
+
+ if (order > ioat_get_max_alloc_order())
+ return false;
+
+ /* double check that we have at least 1 free descriptor */
+ if (active == curr_size)
+ return false;
+
+ /* when shrinking, verify that we can hold the current active
+ * set in the new ring
+ */
+ if (active >= new_size)
+ return false;
+
+ /* allocate the array to hold the software ring */
+ ring = kcalloc(new_size, sizeof(*ring), GFP_NOWAIT);
+ if (!ring)
+ return false;
+
+ /* allocate/trim descriptors as needed */
+ if (new_size > curr_size) {
+ /* copy current descriptors to the new ring */
+ for (i = 0; i < curr_size; i++) {
+ u16 curr_idx = (ioat->tail+i) & (curr_size-1);
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+
+ ring[new_idx] = ioat->ring[curr_idx];
+ set_desc_id(ring[new_idx], new_idx);
+ }
+
+ /* add new descriptors to the ring */
+ for (i = curr_size; i < new_size; i++) {
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+
+ ring[new_idx] = ioat2_alloc_ring_ent(c, GFP_NOWAIT);
+ if (!ring[new_idx]) {
+ while (i--) {
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+
+ ioat2_free_ring_ent(ring[new_idx], c);
+ }
+ kfree(ring);
+ return false;
+ }
+ set_desc_id(ring[new_idx], new_idx);
+ }
+
+ /* hw link new descriptors */
+ for (i = curr_size-1; i < new_size; i++) {
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+ struct ioat_ring_ent *next = ring[(new_idx+1) & (new_size-1)];
+ struct ioat_dma_descriptor *hw = ring[new_idx]->hw;
+
+ hw->next = next->txd.phys;
+ }
+ } else {
+ struct ioat_dma_descriptor *hw;
+ struct ioat_ring_ent *next;
+
+ /* copy current descriptors to the new ring, dropping the
+ * removed descriptors
+ */
+ for (i = 0; i < new_size; i++) {
+ u16 curr_idx = (ioat->tail+i) & (curr_size-1);
+ u16 new_idx = (ioat->tail+i) & (new_size-1);
+
+ ring[new_idx] = ioat->ring[curr_idx];
+ set_desc_id(ring[new_idx], new_idx);
+ }
+
+ /* free deleted descriptors */
+ for (i = new_size; i < curr_size; i++) {
+ struct ioat_ring_ent *ent;
+
+ ent = ioat2_get_ring_ent(ioat, ioat->tail+i);
+ ioat2_free_ring_ent(ent, c);
+ }
+
+ /* fix up hardware ring */
+ hw = ring[(ioat->tail+new_size-1) & (new_size-1)]->hw;
+ next = ring[(ioat->tail+new_size) & (new_size-1)];
+ hw->next = next->txd.phys;
+ }
+
+ dev_dbg(to_dev(chan), "%s: allocated %d descriptors\n",
+ __func__, new_size);
+
+ kfree(ioat->ring);
+ ioat->ring = ring;
+ ioat->alloc_order = order;
+
+ return true;
+}
+
+/**
+ * ioat2_alloc_and_lock - common descriptor alloc boilerplate for ioat2,3 ops
+ * @idx: gets starting descriptor index on successful allocation
+ * @ioat: ioat2,3 channel (ring) to operate on
+ * @num_descs: allocation length
+ */
+int ioat2_alloc_and_lock(u16 *idx, struct ioat2_dma_chan *ioat, int num_descs)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+
+ spin_lock_bh(&ioat->ring_lock);
+ /* never allow the last descriptor to be consumed, we need at
+ * least one free at all times to allow for on-the-fly ring
+ * resizing.
+ */
+ while (unlikely(ioat2_ring_space(ioat) <= num_descs)) {
+ if (reshape_ring(ioat, ioat->alloc_order + 1) &&
+ ioat2_ring_space(ioat) > num_descs)
+ break;
+
+ if (printk_ratelimit())
+ dev_dbg(to_dev(chan),
+ "%s: ring full! num_descs: %d (%x:%x:%x)\n",
+ __func__, num_descs, ioat->head, ioat->tail,
+ ioat->issued);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ /* progress reclaim in the allocation failure case we
+ * may be called under bh_disabled so we need to trigger
+ * the timer event directly
+ */
+ spin_lock_bh(&chan->cleanup_lock);
+ if (jiffies > chan->timer.expires &&
+ timer_pending(&chan->timer)) {
+ struct ioatdma_device *device = chan->device;
+
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ spin_unlock_bh(&chan->cleanup_lock);
+ device->timer_fn((unsigned long) ioat);
+ } else
+ spin_unlock_bh(&chan->cleanup_lock);
+ return -ENOMEM;
+ }
+
+ dev_dbg(to_dev(chan), "%s: num_descs: %d (%x:%x:%x)\n",
+ __func__, num_descs, ioat->head, ioat->tail, ioat->issued);
+
+ *idx = ioat2_desc_alloc(ioat, num_descs);
+ return 0; /* with ioat->ring_lock held */
+}
+
+struct dma_async_tx_descriptor *
+ioat2_dma_prep_memcpy_lock(struct dma_chan *c, dma_addr_t dma_dest,
+ dma_addr_t dma_src, size_t len, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_dma_descriptor *hw;
+ struct ioat_ring_ent *desc;
+ dma_addr_t dst = dma_dest;
+ dma_addr_t src = dma_src;
+ size_t total_len = len;
+ int num_descs;
+ u16 idx;
+ int i;
+
+ num_descs = ioat2_xferlen_to_descs(ioat, len);
+ if (likely(num_descs) &&
+ ioat2_alloc_and_lock(&idx, ioat, num_descs) == 0)
+ /* pass */;
+ else
+ return NULL;
+ i = 0;
+ do {
+ size_t copy = min_t(size_t, len, 1 << ioat->xfercap_log);
+
+ desc = ioat2_get_ring_ent(ioat, idx + i);
+ hw = desc->hw;
+
+ hw->size = copy;
+ hw->ctl = 0;
+ hw->src_addr = src;
+ hw->dst_addr = dst;
+
+ len -= copy;
+ dst += copy;
+ src += copy;
+ dump_desc_dbg(ioat, desc);
+ } while (++i < num_descs);
+
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ hw->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+ hw->ctl_f.compl_write = 1;
+ dump_desc_dbg(ioat, desc);
+ /* we leave the channel locked to ensure in order submission */
+
+ return &desc->txd;
+}
+
+/**
+ * ioat2_free_chan_resources - release all the descriptors
+ * @chan: the channel to be cleaned
+ */
+void ioat2_free_chan_resources(struct dma_chan *c)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioatdma_device *device = chan->device;
+ struct ioat_ring_ent *desc;
+ const u16 total_descs = 1 << ioat->alloc_order;
+ int descs;
+ int i;
+
+ /* Before freeing channel resources first check
+ * if they have been previously allocated for this channel.
+ */
+ if (!ioat->ring)
+ return;
+
+ tasklet_disable(&chan->cleanup_task);
+ del_timer_sync(&chan->timer);
+ device->cleanup_tasklet((unsigned long) ioat);
+
+ /* Delay 100ms after reset to allow internal DMA logic to quiesce
+ * before removing DMA descriptor resources.
+ */
+ writeb(IOAT_CHANCMD_RESET,
+ chan->reg_base + IOAT_CHANCMD_OFFSET(chan->device->version));
+ mdelay(100);
+
+ spin_lock_bh(&ioat->ring_lock);
+ descs = ioat2_ring_space(ioat);
+ dev_dbg(to_dev(chan), "freeing %d idle descriptors\n", descs);
+ for (i = 0; i < descs; i++) {
+ desc = ioat2_get_ring_ent(ioat, ioat->head + i);
+ ioat2_free_ring_ent(desc, c);
+ }
+
+ if (descs < total_descs)
+ dev_err(to_dev(chan), "Freeing %d in use descriptors!\n",
+ total_descs - descs);
+
+ for (i = 0; i < total_descs - descs; i++) {
+ desc = ioat2_get_ring_ent(ioat, ioat->tail + i);
+ dump_desc_dbg(ioat, desc);
+ ioat2_free_ring_ent(desc, c);
+ }
+
+ kfree(ioat->ring);
+ ioat->ring = NULL;
+ ioat->alloc_order = 0;
+ pci_pool_free(device->completion_pool, chan->completion,
+ chan->completion_dma);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ chan->last_completion = 0;
+ chan->completion_dma = 0;
+ ioat->pending = 0;
+ ioat->dmacount = 0;
+}
+
+enum dma_status
+ioat2_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioatdma_device *device = ioat->base.device;
+
+ if (ioat_is_complete(c, cookie, done, used) == DMA_SUCCESS)
+ return DMA_SUCCESS;
+
+ device->cleanup_tasklet((unsigned long) ioat);
+
+ return ioat_is_complete(c, cookie, done, used);
+}
+
+static ssize_t ring_size_show(struct dma_chan *c, char *page)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+
+ return sprintf(page, "%d\n", (1 << ioat->alloc_order) & ~1);
+}
+static struct ioat_sysfs_entry ring_size_attr = __ATTR_RO(ring_size);
+
+static ssize_t ring_active_show(struct dma_chan *c, char *page)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+
+ /* ...taken outside the lock, no need to be precise */
+ return sprintf(page, "%d\n", ioat2_ring_active(ioat));
+}
+static struct ioat_sysfs_entry ring_active_attr = __ATTR_RO(ring_active);
+
+static struct attribute *ioat2_attrs[] = {
+ &ring_size_attr.attr,
+ &ring_active_attr.attr,
+ &ioat_cap_attr.attr,
+ &ioat_version_attr.attr,
+ NULL,
+};
+
+struct kobj_type ioat2_ktype = {
+ .sysfs_ops = &ioat_sysfs_ops,
+ .default_attrs = ioat2_attrs,
+};
+
+int __devinit ioat2_dma_probe(struct ioatdma_device *device, int dca)
+{
+ struct pci_dev *pdev = device->pdev;
+ struct dma_device *dma;
+ struct dma_chan *c;
+ struct ioat_chan_common *chan;
+ int err;
+
+ device->enumerate_channels = ioat2_enumerate_channels;
+ device->cleanup_tasklet = ioat2_cleanup_tasklet;
+ device->timer_fn = ioat2_timer_event;
+ device->self_test = ioat_dma_self_test;
+ dma = &device->common;
+ dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock;
+ dma->device_issue_pending = ioat2_issue_pending;
+ dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
+ dma->device_free_chan_resources = ioat2_free_chan_resources;
+ dma->device_is_tx_complete = ioat2_is_complete;
+
+ err = ioat_probe(device);
+ if (err)
+ return err;
+ ioat_set_tcp_copy_break(2048);
+
+ list_for_each_entry(c, &dma->channels, device_node) {
+ chan = to_chan_common(c);
+ writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE | IOAT_DMA_DCA_ANY_CPU,
+ chan->reg_base + IOAT_DCACTRL_OFFSET);
+ }
+
+ err = ioat_register(device);
+ if (err)
+ return err;
+
+ ioat_kobject_add(device, &ioat2_ktype);
+
+ if (dca)
+ device->dca = ioat2_dca_init(pdev, device->reg_base);
+
+ return err;
+}
--- /dev/null
+/*
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef IOATDMA_V2_H
+#define IOATDMA_V2_H
+
+#include <linux/dmaengine.h>
+#include "dma.h"
+#include "hw.h"
+
+
+extern int ioat_pending_level;
+extern int ioat_ring_alloc_order;
+
+/*
+ * workaround for IOAT ver.3.0 null descriptor issue
+ * (channel returns error when size is 0)
+ */
+#define NULL_DESC_BUFFER_SIZE 1
+
+#define IOAT_MAX_ORDER 16
+#define ioat_get_alloc_order() \
+ (min(ioat_ring_alloc_order, IOAT_MAX_ORDER))
+#define ioat_get_max_alloc_order() \
+ (min(ioat_ring_max_alloc_order, IOAT_MAX_ORDER))
+
+/* struct ioat2_dma_chan - ioat v2 / v3 channel attributes
+ * @base: common ioat channel parameters
+ * @xfercap_log; log2 of channel max transfer length (for fast division)
+ * @head: allocated index
+ * @issued: hardware notification point
+ * @tail: cleanup index
+ * @pending: lock free indicator for issued != head
+ * @dmacount: identical to 'head' except for occasionally resetting to zero
+ * @alloc_order: log2 of the number of allocated descriptors
+ * @ring: software ring buffer implementation of hardware ring
+ * @ring_lock: protects ring attributes
+ */
+struct ioat2_dma_chan {
+ struct ioat_chan_common base;
+ size_t xfercap_log;
+ u16 head;
+ u16 issued;
+ u16 tail;
+ u16 dmacount;
+ u16 alloc_order;
+ int pending;
+ struct ioat_ring_ent **ring;
+ spinlock_t ring_lock;
+};
+
+static inline struct ioat2_dma_chan *to_ioat2_chan(struct dma_chan *c)
+{
+ struct ioat_chan_common *chan = to_chan_common(c);
+
+ return container_of(chan, struct ioat2_dma_chan, base);
+}
+
+static inline u16 ioat2_ring_mask(struct ioat2_dma_chan *ioat)
+{
+ return (1 << ioat->alloc_order) - 1;
+}
+
+/* count of descriptors in flight with the engine */
+static inline u16 ioat2_ring_active(struct ioat2_dma_chan *ioat)
+{
+ return (ioat->head - ioat->tail) & ioat2_ring_mask(ioat);
+}
+
+/* count of descriptors pending submission to hardware */
+static inline u16 ioat2_ring_pending(struct ioat2_dma_chan *ioat)
+{
+ return (ioat->head - ioat->issued) & ioat2_ring_mask(ioat);
+}
+
+static inline u16 ioat2_ring_space(struct ioat2_dma_chan *ioat)
+{
+ u16 num_descs = ioat2_ring_mask(ioat) + 1;
+ u16 active = ioat2_ring_active(ioat);
+
+ BUG_ON(active > num_descs);
+
+ return num_descs - active;
+}
+
+/* assumes caller already checked space */
+static inline u16 ioat2_desc_alloc(struct ioat2_dma_chan *ioat, u16 len)
+{
+ ioat->head += len;
+ return ioat->head - len;
+}
+
+static inline u16 ioat2_xferlen_to_descs(struct ioat2_dma_chan *ioat, size_t len)
+{
+ u16 num_descs = len >> ioat->xfercap_log;
+
+ num_descs += !!(len & ((1 << ioat->xfercap_log) - 1));
+ return num_descs;
+}
+
+/**
+ * struct ioat_ring_ent - wrapper around hardware descriptor
+ * @hw: hardware DMA descriptor (for memcpy)
+ * @fill: hardware fill descriptor
+ * @xor: hardware xor descriptor
+ * @xor_ex: hardware xor extension descriptor
+ * @pq: hardware pq descriptor
+ * @pq_ex: hardware pq extension descriptor
+ * @pqu: hardware pq update descriptor
+ * @raw: hardware raw (un-typed) descriptor
+ * @txd: the generic software descriptor for all engines
+ * @len: total transaction length for unmap
+ * @result: asynchronous result of validate operations
+ * @id: identifier for debug
+ */
+
+struct ioat_ring_ent {
+ union {
+ struct ioat_dma_descriptor *hw;
+ struct ioat_fill_descriptor *fill;
+ struct ioat_xor_descriptor *xor;
+ struct ioat_xor_ext_descriptor *xor_ex;
+ struct ioat_pq_descriptor *pq;
+ struct ioat_pq_ext_descriptor *pq_ex;
+ struct ioat_pq_update_descriptor *pqu;
+ struct ioat_raw_descriptor *raw;
+ };
+ size_t len;
+ struct dma_async_tx_descriptor txd;
+ enum sum_check_flags *result;
+ #ifdef DEBUG
+ int id;
+ #endif
+};
+
+static inline struct ioat_ring_ent *
+ioat2_get_ring_ent(struct ioat2_dma_chan *ioat, u16 idx)
+{
+ return ioat->ring[idx & ioat2_ring_mask(ioat)];
+}
+
+static inline void ioat2_set_chainaddr(struct ioat2_dma_chan *ioat, u64 addr)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+
+ writel(addr & 0x00000000FFFFFFFF,
+ chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
+ writel(addr >> 32,
+ chan->reg_base + IOAT2_CHAINADDR_OFFSET_HIGH);
+}
+
+int __devinit ioat2_dma_probe(struct ioatdma_device *dev, int dca);
+int __devinit ioat3_dma_probe(struct ioatdma_device *dev, int dca);
+struct dca_provider * __devinit ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase);
+struct dca_provider * __devinit ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase);
+int ioat2_alloc_and_lock(u16 *idx, struct ioat2_dma_chan *ioat, int num_descs);
+int ioat2_enumerate_channels(struct ioatdma_device *device);
+struct dma_async_tx_descriptor *
+ioat2_dma_prep_memcpy_lock(struct dma_chan *c, dma_addr_t dma_dest,
+ dma_addr_t dma_src, size_t len, unsigned long flags);
+void ioat2_issue_pending(struct dma_chan *chan);
+int ioat2_alloc_chan_resources(struct dma_chan *c);
+void ioat2_free_chan_resources(struct dma_chan *c);
+enum dma_status ioat2_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used);
+void __ioat2_restart_chan(struct ioat2_dma_chan *ioat);
+bool reshape_ring(struct ioat2_dma_chan *ioat, int order);
+void __ioat2_issue_pending(struct ioat2_dma_chan *ioat);
+void ioat2_cleanup_tasklet(unsigned long data);
+void ioat2_timer_event(unsigned long data);
+extern struct kobj_type ioat2_ktype;
+extern struct kmem_cache *ioat2_cache;
+#endif /* IOATDMA_V2_H */
--- /dev/null
+/*
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2004-2009 Intel Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Support routines for v3+ hardware
+ */
+
+#include <linux/pci.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include "registers.h"
+#include "hw.h"
+#include "dma.h"
+#include "dma_v2.h"
+
+/* ioat hardware assumes at least two sources for raid operations */
+#define src_cnt_to_sw(x) ((x) + 2)
+#define src_cnt_to_hw(x) ((x) - 2)
+
+/* provide a lookup table for setting the source address in the base or
+ * extended descriptor of an xor or pq descriptor
+ */
+static const u8 xor_idx_to_desc __read_mostly = 0xd0;
+static const u8 xor_idx_to_field[] __read_mostly = { 1, 4, 5, 6, 7, 0, 1, 2 };
+static const u8 pq_idx_to_desc __read_mostly = 0xf8;
+static const u8 pq_idx_to_field[] __read_mostly = { 1, 4, 5, 0, 1, 2, 4, 5 };
+
+static dma_addr_t xor_get_src(struct ioat_raw_descriptor *descs[2], int idx)
+{
+ struct ioat_raw_descriptor *raw = descs[xor_idx_to_desc >> idx & 1];
+
+ return raw->field[xor_idx_to_field[idx]];
+}
+
+static void xor_set_src(struct ioat_raw_descriptor *descs[2],
+ dma_addr_t addr, u32 offset, int idx)
+{
+ struct ioat_raw_descriptor *raw = descs[xor_idx_to_desc >> idx & 1];
+
+ raw->field[xor_idx_to_field[idx]] = addr + offset;
+}
+
+static dma_addr_t pq_get_src(struct ioat_raw_descriptor *descs[2], int idx)
+{
+ struct ioat_raw_descriptor *raw = descs[pq_idx_to_desc >> idx & 1];
+
+ return raw->field[pq_idx_to_field[idx]];
+}
+
+static void pq_set_src(struct ioat_raw_descriptor *descs[2],
+ dma_addr_t addr, u32 offset, u8 coef, int idx)
+{
+ struct ioat_pq_descriptor *pq = (struct ioat_pq_descriptor *) descs[0];
+ struct ioat_raw_descriptor *raw = descs[pq_idx_to_desc >> idx & 1];
+
+ raw->field[pq_idx_to_field[idx]] = addr + offset;
+ pq->coef[idx] = coef;
+}
+
+static void ioat3_dma_unmap(struct ioat2_dma_chan *ioat,
+ struct ioat_ring_ent *desc, int idx)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct pci_dev *pdev = chan->device->pdev;
+ size_t len = desc->len;
+ size_t offset = len - desc->hw->size;
+ struct dma_async_tx_descriptor *tx = &desc->txd;
+ enum dma_ctrl_flags flags = tx->flags;
+
+ switch (desc->hw->ctl_f.op) {
+ case IOAT_OP_COPY:
+ if (!desc->hw->ctl_f.null) /* skip 'interrupt' ops */
+ ioat_dma_unmap(chan, flags, len, desc->hw);
+ break;
+ case IOAT_OP_FILL: {
+ struct ioat_fill_descriptor *hw = desc->fill;
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP))
+ ioat_unmap(pdev, hw->dst_addr - offset, len,
+ PCI_DMA_FROMDEVICE, flags, 1);
+ break;
+ }
+ case IOAT_OP_XOR_VAL:
+ case IOAT_OP_XOR: {
+ struct ioat_xor_descriptor *xor = desc->xor;
+ struct ioat_ring_ent *ext;
+ struct ioat_xor_ext_descriptor *xor_ex = NULL;
+ int src_cnt = src_cnt_to_sw(xor->ctl_f.src_cnt);
+ struct ioat_raw_descriptor *descs[2];
+ int i;
+
+ if (src_cnt > 5) {
+ ext = ioat2_get_ring_ent(ioat, idx + 1);
+ xor_ex = ext->xor_ex;
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ descs[0] = (struct ioat_raw_descriptor *) xor;
+ descs[1] = (struct ioat_raw_descriptor *) xor_ex;
+ for (i = 0; i < src_cnt; i++) {
+ dma_addr_t src = xor_get_src(descs, i);
+
+ ioat_unmap(pdev, src - offset, len,
+ PCI_DMA_TODEVICE, flags, 0);
+ }
+
+ /* dest is a source in xor validate operations */
+ if (xor->ctl_f.op == IOAT_OP_XOR_VAL) {
+ ioat_unmap(pdev, xor->dst_addr - offset, len,
+ PCI_DMA_TODEVICE, flags, 1);
+ break;
+ }
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP))
+ ioat_unmap(pdev, xor->dst_addr - offset, len,
+ PCI_DMA_FROMDEVICE, flags, 1);
+ break;
+ }
+ case IOAT_OP_PQ_VAL:
+ case IOAT_OP_PQ: {
+ struct ioat_pq_descriptor *pq = desc->pq;
+ struct ioat_ring_ent *ext;
+ struct ioat_pq_ext_descriptor *pq_ex = NULL;
+ int src_cnt = src_cnt_to_sw(pq->ctl_f.src_cnt);
+ struct ioat_raw_descriptor *descs[2];
+ int i;
+
+ if (src_cnt > 3) {
+ ext = ioat2_get_ring_ent(ioat, idx + 1);
+ pq_ex = ext->pq_ex;
+ }
+
+ /* in the 'continue' case don't unmap the dests as sources */
+ if (dmaf_p_disabled_continue(flags))
+ src_cnt--;
+ else if (dmaf_continue(flags))
+ src_cnt -= 3;
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ descs[0] = (struct ioat_raw_descriptor *) pq;
+ descs[1] = (struct ioat_raw_descriptor *) pq_ex;
+ for (i = 0; i < src_cnt; i++) {
+ dma_addr_t src = pq_get_src(descs, i);
+
+ ioat_unmap(pdev, src - offset, len,
+ PCI_DMA_TODEVICE, flags, 0);
+ }
+
+ /* the dests are sources in pq validate operations */
+ if (pq->ctl_f.op == IOAT_OP_XOR_VAL) {
+ if (!(flags & DMA_PREP_PQ_DISABLE_P))
+ ioat_unmap(pdev, pq->p_addr - offset,
+ len, PCI_DMA_TODEVICE, flags, 0);
+ if (!(flags & DMA_PREP_PQ_DISABLE_Q))
+ ioat_unmap(pdev, pq->q_addr - offset,
+ len, PCI_DMA_TODEVICE, flags, 0);
+ break;
+ }
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (!(flags & DMA_PREP_PQ_DISABLE_P))
+ ioat_unmap(pdev, pq->p_addr - offset, len,
+ PCI_DMA_BIDIRECTIONAL, flags, 1);
+ if (!(flags & DMA_PREP_PQ_DISABLE_Q))
+ ioat_unmap(pdev, pq->q_addr - offset, len,
+ PCI_DMA_BIDIRECTIONAL, flags, 1);
+ }
+ break;
+ }
+ default:
+ dev_err(&pdev->dev, "%s: unknown op type: %#x\n",
+ __func__, desc->hw->ctl_f.op);
+ }
+}
+
+static bool desc_has_ext(struct ioat_ring_ent *desc)
+{
+ struct ioat_dma_descriptor *hw = desc->hw;
+
+ if (hw->ctl_f.op == IOAT_OP_XOR ||
+ hw->ctl_f.op == IOAT_OP_XOR_VAL) {
+ struct ioat_xor_descriptor *xor = desc->xor;
+
+ if (src_cnt_to_sw(xor->ctl_f.src_cnt) > 5)
+ return true;
+ } else if (hw->ctl_f.op == IOAT_OP_PQ ||
+ hw->ctl_f.op == IOAT_OP_PQ_VAL) {
+ struct ioat_pq_descriptor *pq = desc->pq;
+
+ if (src_cnt_to_sw(pq->ctl_f.src_cnt) > 3)
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * __cleanup - reclaim used descriptors
+ * @ioat: channel (ring) to clean
+ *
+ * The difference from the dma_v2.c __cleanup() is that this routine
+ * handles extended descriptors and dma-unmapping raid operations.
+ */
+static void __cleanup(struct ioat2_dma_chan *ioat, unsigned long phys_complete)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_ring_ent *desc;
+ bool seen_current = false;
+ u16 active;
+ int i;
+
+ dev_dbg(to_dev(chan), "%s: head: %#x tail: %#x issued: %#x\n",
+ __func__, ioat->head, ioat->tail, ioat->issued);
+
+ active = ioat2_ring_active(ioat);
+ for (i = 0; i < active && !seen_current; i++) {
+ struct dma_async_tx_descriptor *tx;
+
+ prefetch(ioat2_get_ring_ent(ioat, ioat->tail + i + 1));
+ desc = ioat2_get_ring_ent(ioat, ioat->tail + i);
+ dump_desc_dbg(ioat, desc);
+ tx = &desc->txd;
+ if (tx->cookie) {
+ chan->completed_cookie = tx->cookie;
+ ioat3_dma_unmap(ioat, desc, ioat->tail + i);
+ tx->cookie = 0;
+ if (tx->callback) {
+ tx->callback(tx->callback_param);
+ tx->callback = NULL;
+ }
+ }
+
+ if (tx->phys == phys_complete)
+ seen_current = true;
+
+ /* skip extended descriptors */
+ if (desc_has_ext(desc)) {
+ BUG_ON(i + 1 >= active);
+ i++;
+ }
+ }
+ ioat->tail += i;
+ BUG_ON(!seen_current); /* no active descs have written a completion? */
+ chan->last_completion = phys_complete;
+ if (ioat->head == ioat->tail) {
+ dev_dbg(to_dev(chan), "%s: cancel completion timeout\n",
+ __func__);
+ clear_bit(IOAT_COMPLETION_PENDING, &chan->state);
+ mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT);
+ }
+}
+
+static void ioat3_cleanup(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+
+ prefetch(chan->completion);
+
+ if (!spin_trylock_bh(&chan->cleanup_lock))
+ return;
+
+ if (!ioat_cleanup_preamble(chan, &phys_complete)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ if (!spin_trylock_bh(&ioat->ring_lock)) {
+ spin_unlock_bh(&chan->cleanup_lock);
+ return;
+ }
+
+ __cleanup(ioat, phys_complete);
+
+ spin_unlock_bh(&ioat->ring_lock);
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+static void ioat3_cleanup_tasklet(unsigned long data)
+{
+ struct ioat2_dma_chan *ioat = (void *) data;
+
+ ioat3_cleanup(ioat);
+ writew(IOAT_CHANCTRL_RUN | IOAT3_CHANCTRL_COMPL_DCA_EN,
+ ioat->base.reg_base + IOAT_CHANCTRL_OFFSET);
+}
+
+static void ioat3_restart_channel(struct ioat2_dma_chan *ioat)
+{
+ struct ioat_chan_common *chan = &ioat->base;
+ unsigned long phys_complete;
+ u32 status;
+
+ status = ioat_chansts(chan);
+ if (is_ioat_active(status) || is_ioat_idle(status))
+ ioat_suspend(chan);
+ while (is_ioat_active(status) || is_ioat_idle(status)) {
+ status = ioat_chansts(chan);
+ cpu_relax();
+ }
+
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+
+ __ioat2_restart_chan(ioat);
+}
+
+static void ioat3_timer_event(unsigned long data)
+{
+ struct ioat2_dma_chan *ioat = (void *) data;
+ struct ioat_chan_common *chan = &ioat->base;
+
+ spin_lock_bh(&chan->cleanup_lock);
+ if (test_bit(IOAT_COMPLETION_PENDING, &chan->state)) {
+ unsigned long phys_complete;
+ u64 status;
+
+ spin_lock_bh(&ioat->ring_lock);
+ status = ioat_chansts(chan);
+
+ /* when halted due to errors check for channel
+ * programming errors before advancing the completion state
+ */
+ if (is_ioat_halted(status)) {
+ u32 chanerr;
+
+ chanerr = readl(chan->reg_base + IOAT_CHANERR_OFFSET);
+ BUG_ON(is_ioat_bug(chanerr));
+ }
+
+ /* if we haven't made progress and we have already
+ * acknowledged a pending completion once, then be more
+ * forceful with a restart
+ */
+ if (ioat_cleanup_preamble(chan, &phys_complete))
+ __cleanup(ioat, phys_complete);
+ else if (test_bit(IOAT_COMPLETION_ACK, &chan->state))
+ ioat3_restart_channel(ioat);
+ else {
+ set_bit(IOAT_COMPLETION_ACK, &chan->state);
+ mod_timer(&chan->timer, jiffies + COMPLETION_TIMEOUT);
+ }
+ spin_unlock_bh(&ioat->ring_lock);
+ } else {
+ u16 active;
+
+ /* if the ring is idle, empty, and oversized try to step
+ * down the size
+ */
+ spin_lock_bh(&ioat->ring_lock);
+ active = ioat2_ring_active(ioat);
+ if (active == 0 && ioat->alloc_order > ioat_get_alloc_order())
+ reshape_ring(ioat, ioat->alloc_order-1);
+ spin_unlock_bh(&ioat->ring_lock);
+
+ /* keep shrinking until we get back to our minimum
+ * default size
+ */
+ if (ioat->alloc_order > ioat_get_alloc_order())
+ mod_timer(&chan->timer, jiffies + IDLE_TIMEOUT);
+ }
+ spin_unlock_bh(&chan->cleanup_lock);
+}
+
+static enum dma_status
+ioat3_is_complete(struct dma_chan *c, dma_cookie_t cookie,
+ dma_cookie_t *done, dma_cookie_t *used)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+
+ if (ioat_is_complete(c, cookie, done, used) == DMA_SUCCESS)
+ return DMA_SUCCESS;
+
+ ioat3_cleanup(ioat);
+
+ return ioat_is_complete(c, cookie, done, used);
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_memset_lock(struct dma_chan *c, dma_addr_t dest, int value,
+ size_t len, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_ring_ent *desc;
+ size_t total_len = len;
+ struct ioat_fill_descriptor *fill;
+ int num_descs;
+ u64 src_data = (0x0101010101010101ULL) * (value & 0xff);
+ u16 idx;
+ int i;
+
+ num_descs = ioat2_xferlen_to_descs(ioat, len);
+ if (likely(num_descs) &&
+ ioat2_alloc_and_lock(&idx, ioat, num_descs) == 0)
+ /* pass */;
+ else
+ return NULL;
+ i = 0;
+ do {
+ size_t xfer_size = min_t(size_t, len, 1 << ioat->xfercap_log);
+
+ desc = ioat2_get_ring_ent(ioat, idx + i);
+ fill = desc->fill;
+
+ fill->size = xfer_size;
+ fill->src_data = src_data;
+ fill->dst_addr = dest;
+ fill->ctl = 0;
+ fill->ctl_f.op = IOAT_OP_FILL;
+
+ len -= xfer_size;
+ dest += xfer_size;
+ dump_desc_dbg(ioat, desc);
+ } while (++i < num_descs);
+
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ fill->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ fill->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+ fill->ctl_f.compl_write = 1;
+ dump_desc_dbg(ioat, desc);
+
+ /* we leave the channel locked to ensure in order submission */
+ return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+__ioat3_prep_xor_lock(struct dma_chan *c, enum sum_check_flags *result,
+ dma_addr_t dest, dma_addr_t *src, unsigned int src_cnt,
+ size_t len, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_ring_ent *compl_desc;
+ struct ioat_ring_ent *desc;
+ struct ioat_ring_ent *ext;
+ size_t total_len = len;
+ struct ioat_xor_descriptor *xor;
+ struct ioat_xor_ext_descriptor *xor_ex = NULL;
+ struct ioat_dma_descriptor *hw;
+ u32 offset = 0;
+ int num_descs;
+ int with_ext;
+ int i;
+ u16 idx;
+ u8 op = result ? IOAT_OP_XOR_VAL : IOAT_OP_XOR;
+
+ BUG_ON(src_cnt < 2);
+
+ num_descs = ioat2_xferlen_to_descs(ioat, len);
+ /* we need 2x the number of descriptors to cover greater than 5
+ * sources
+ */
+ if (src_cnt > 5) {
+ with_ext = 1;
+ num_descs *= 2;
+ } else
+ with_ext = 0;
+
+ /* completion writes from the raid engine may pass completion
+ * writes from the legacy engine, so we need one extra null
+ * (legacy) descriptor to ensure all completion writes arrive in
+ * order.
+ */
+ if (likely(num_descs) &&
+ ioat2_alloc_and_lock(&idx, ioat, num_descs+1) == 0)
+ /* pass */;
+ else
+ return NULL;
+ i = 0;
+ do {
+ struct ioat_raw_descriptor *descs[2];
+ size_t xfer_size = min_t(size_t, len, 1 << ioat->xfercap_log);
+ int s;
+
+ desc = ioat2_get_ring_ent(ioat, idx + i);
+ xor = desc->xor;
+
+ /* save a branch by unconditionally retrieving the
+ * extended descriptor xor_set_src() knows to not write
+ * to it in the single descriptor case
+ */
+ ext = ioat2_get_ring_ent(ioat, idx + i + 1);
+ xor_ex = ext->xor_ex;
+
+ descs[0] = (struct ioat_raw_descriptor *) xor;
+ descs[1] = (struct ioat_raw_descriptor *) xor_ex;
+ for (s = 0; s < src_cnt; s++)
+ xor_set_src(descs, src[s], offset, s);
+ xor->size = xfer_size;
+ xor->dst_addr = dest + offset;
+ xor->ctl = 0;
+ xor->ctl_f.op = op;
+ xor->ctl_f.src_cnt = src_cnt_to_hw(src_cnt);
+
+ len -= xfer_size;
+ offset += xfer_size;
+ dump_desc_dbg(ioat, desc);
+ } while ((i += 1 + with_ext) < num_descs);
+
+ /* last xor descriptor carries the unmap parameters and fence bit */
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ if (result)
+ desc->result = result;
+ xor->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+
+ /* completion descriptor carries interrupt bit */
+ compl_desc = ioat2_get_ring_ent(ioat, idx + i);
+ compl_desc->txd.flags = flags & DMA_PREP_INTERRUPT;
+ hw = compl_desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ hw->ctl_f.compl_write = 1;
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ dump_desc_dbg(ioat, compl_desc);
+
+ /* we leave the channel locked to ensure in order submission */
+ return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_xor(struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
+ unsigned int src_cnt, size_t len, unsigned long flags)
+{
+ return __ioat3_prep_xor_lock(chan, NULL, dest, src, src_cnt, len, flags);
+}
+
+struct dma_async_tx_descriptor *
+ioat3_prep_xor_val(struct dma_chan *chan, dma_addr_t *src,
+ unsigned int src_cnt, size_t len,
+ enum sum_check_flags *result, unsigned long flags)
+{
+ /* the cleanup routine only sets bits on validate failure, it
+ * does not clear bits on validate success... so clear it here
+ */
+ *result = 0;
+
+ return __ioat3_prep_xor_lock(chan, result, src[0], &src[1],
+ src_cnt - 1, len, flags);
+}
+
+static void
+dump_pq_desc_dbg(struct ioat2_dma_chan *ioat, struct ioat_ring_ent *desc, struct ioat_ring_ent *ext)
+{
+ struct device *dev = to_dev(&ioat->base);
+ struct ioat_pq_descriptor *pq = desc->pq;
+ struct ioat_pq_ext_descriptor *pq_ex = ext ? ext->pq_ex : NULL;
+ struct ioat_raw_descriptor *descs[] = { (void *) pq, (void *) pq_ex };
+ int src_cnt = src_cnt_to_sw(pq->ctl_f.src_cnt);
+ int i;
+
+ dev_dbg(dev, "desc[%d]: (%#llx->%#llx) flags: %#x"
+ " sz: %#x ctl: %#x (op: %d int: %d compl: %d pq: '%s%s' src_cnt: %d)\n",
+ desc_id(desc), (unsigned long long) desc->txd.phys,
+ (unsigned long long) (pq_ex ? pq_ex->next : pq->next),
+ desc->txd.flags, pq->size, pq->ctl, pq->ctl_f.op, pq->ctl_f.int_en,
+ pq->ctl_f.compl_write,
+ pq->ctl_f.p_disable ? "" : "p", pq->ctl_f.q_disable ? "" : "q",
+ pq->ctl_f.src_cnt);
+ for (i = 0; i < src_cnt; i++)
+ dev_dbg(dev, "\tsrc[%d]: %#llx coef: %#x\n", i,
+ (unsigned long long) pq_get_src(descs, i), pq->coef[i]);
+ dev_dbg(dev, "\tP: %#llx\n", pq->p_addr);
+ dev_dbg(dev, "\tQ: %#llx\n", pq->q_addr);
+}
+
+static struct dma_async_tx_descriptor *
+__ioat3_prep_pq_lock(struct dma_chan *c, enum sum_check_flags *result,
+ const dma_addr_t *dst, const dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf,
+ size_t len, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_chan_common *chan = &ioat->base;
+ struct ioat_ring_ent *compl_desc;
+ struct ioat_ring_ent *desc;
+ struct ioat_ring_ent *ext;
+ size_t total_len = len;
+ struct ioat_pq_descriptor *pq;
+ struct ioat_pq_ext_descriptor *pq_ex = NULL;
+ struct ioat_dma_descriptor *hw;
+ u32 offset = 0;
+ int num_descs;
+ int with_ext;
+ int i, s;
+ u16 idx;
+ u8 op = result ? IOAT_OP_PQ_VAL : IOAT_OP_PQ;
+
+ dev_dbg(to_dev(chan), "%s\n", __func__);
+ /* the engine requires at least two sources (we provide
+ * at least 1 implied source in the DMA_PREP_CONTINUE case)
+ */
+ BUG_ON(src_cnt + dmaf_continue(flags) < 2);
+
+ num_descs = ioat2_xferlen_to_descs(ioat, len);
+ /* we need 2x the number of descriptors to cover greater than 3
+ * sources
+ */
+ if (src_cnt > 3 || flags & DMA_PREP_CONTINUE) {
+ with_ext = 1;
+ num_descs *= 2;
+ } else
+ with_ext = 0;
+
+ /* completion writes from the raid engine may pass completion
+ * writes from the legacy engine, so we need one extra null
+ * (legacy) descriptor to ensure all completion writes arrive in
+ * order.
+ */
+ if (likely(num_descs) &&
+ ioat2_alloc_and_lock(&idx, ioat, num_descs+1) == 0)
+ /* pass */;
+ else
+ return NULL;
+ i = 0;
+ do {
+ struct ioat_raw_descriptor *descs[2];
+ size_t xfer_size = min_t(size_t, len, 1 << ioat->xfercap_log);
+
+ desc = ioat2_get_ring_ent(ioat, idx + i);
+ pq = desc->pq;
+
+ /* save a branch by unconditionally retrieving the
+ * extended descriptor pq_set_src() knows to not write
+ * to it in the single descriptor case
+ */
+ ext = ioat2_get_ring_ent(ioat, idx + i + with_ext);
+ pq_ex = ext->pq_ex;
+
+ descs[0] = (struct ioat_raw_descriptor *) pq;
+ descs[1] = (struct ioat_raw_descriptor *) pq_ex;
+
+ for (s = 0; s < src_cnt; s++)
+ pq_set_src(descs, src[s], offset, scf[s], s);
+
+ /* see the comment for dma_maxpq in include/linux/dmaengine.h */
+ if (dmaf_p_disabled_continue(flags))
+ pq_set_src(descs, dst[1], offset, 1, s++);
+ else if (dmaf_continue(flags)) {
+ pq_set_src(descs, dst[0], offset, 0, s++);
+ pq_set_src(descs, dst[1], offset, 1, s++);
+ pq_set_src(descs, dst[1], offset, 0, s++);
+ }
+ pq->size = xfer_size;
+ pq->p_addr = dst[0] + offset;
+ pq->q_addr = dst[1] + offset;
+ pq->ctl = 0;
+ pq->ctl_f.op = op;
+ pq->ctl_f.src_cnt = src_cnt_to_hw(s);
+ pq->ctl_f.p_disable = !!(flags & DMA_PREP_PQ_DISABLE_P);
+ pq->ctl_f.q_disable = !!(flags & DMA_PREP_PQ_DISABLE_Q);
+
+ len -= xfer_size;
+ offset += xfer_size;
+ } while ((i += 1 + with_ext) < num_descs);
+
+ /* last pq descriptor carries the unmap parameters and fence bit */
+ desc->txd.flags = flags;
+ desc->len = total_len;
+ if (result)
+ desc->result = result;
+ pq->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+ dump_pq_desc_dbg(ioat, desc, ext);
+
+ /* completion descriptor carries interrupt bit */
+ compl_desc = ioat2_get_ring_ent(ioat, idx + i);
+ compl_desc->txd.flags = flags & DMA_PREP_INTERRUPT;
+ hw = compl_desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = !!(flags & DMA_PREP_INTERRUPT);
+ hw->ctl_f.compl_write = 1;
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ dump_desc_dbg(ioat, compl_desc);
+
+ /* we leave the channel locked to ensure in order submission */
+ return &desc->txd;
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf, size_t len,
+ unsigned long flags)
+{
+ /* handle the single source multiply case from the raid6
+ * recovery path
+ */
+ if (unlikely((flags & DMA_PREP_PQ_DISABLE_P) && src_cnt == 1)) {
+ dma_addr_t single_source[2];
+ unsigned char single_source_coef[2];
+
+ BUG_ON(flags & DMA_PREP_PQ_DISABLE_Q);
+ single_source[0] = src[0];
+ single_source[1] = src[0];
+ single_source_coef[0] = scf[0];
+ single_source_coef[1] = 0;
+
+ return __ioat3_prep_pq_lock(chan, NULL, dst, single_source, 2,
+ single_source_coef, len, flags);
+ } else
+ return __ioat3_prep_pq_lock(chan, NULL, dst, src, src_cnt, scf,
+ len, flags);
+}
+
+struct dma_async_tx_descriptor *
+ioat3_prep_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf, size_t len,
+ enum sum_check_flags *pqres, unsigned long flags)
+{
+ /* the cleanup routine only sets bits on validate failure, it
+ * does not clear bits on validate success... so clear it here
+ */
+ *pqres = 0;
+
+ return __ioat3_prep_pq_lock(chan, pqres, pq, src, src_cnt, scf, len,
+ flags);
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_pqxor(struct dma_chan *chan, dma_addr_t dst, dma_addr_t *src,
+ unsigned int src_cnt, size_t len, unsigned long flags)
+{
+ unsigned char scf[src_cnt];
+ dma_addr_t pq[2];
+
+ memset(scf, 0, src_cnt);
+ flags |= DMA_PREP_PQ_DISABLE_Q;
+ pq[0] = dst;
+ pq[1] = ~0;
+
+ return __ioat3_prep_pq_lock(chan, NULL, pq, src, src_cnt, scf, len,
+ flags);
+}
+
+struct dma_async_tx_descriptor *
+ioat3_prep_pqxor_val(struct dma_chan *chan, dma_addr_t *src,
+ unsigned int src_cnt, size_t len,
+ enum sum_check_flags *result, unsigned long flags)
+{
+ unsigned char scf[src_cnt];
+ dma_addr_t pq[2];
+
+ /* the cleanup routine only sets bits on validate failure, it
+ * does not clear bits on validate success... so clear it here
+ */
+ *result = 0;
+
+ memset(scf, 0, src_cnt);
+ flags |= DMA_PREP_PQ_DISABLE_Q;
+ pq[0] = src[0];
+ pq[1] = ~0;
+
+ return __ioat3_prep_pq_lock(chan, result, pq, &src[1], src_cnt - 1, scf,
+ len, flags);
+}
+
+static struct dma_async_tx_descriptor *
+ioat3_prep_interrupt_lock(struct dma_chan *c, unsigned long flags)
+{
+ struct ioat2_dma_chan *ioat = to_ioat2_chan(c);
+ struct ioat_ring_ent *desc;
+ struct ioat_dma_descriptor *hw;
+ u16 idx;
+
+ if (ioat2_alloc_and_lock(&idx, ioat, 1) == 0)
+ desc = ioat2_get_ring_ent(ioat, idx);
+ else
+ return NULL;
+
+ hw = desc->hw;
+ hw->ctl = 0;
+ hw->ctl_f.null = 1;
+ hw->ctl_f.int_en = 1;
+ hw->ctl_f.fence = !!(flags & DMA_PREP_FENCE);
+ hw->ctl_f.compl_write = 1;
+ hw->size = NULL_DESC_BUFFER_SIZE;
+ hw->src_addr = 0;
+ hw->dst_addr = 0;
+
+ desc->txd.flags = flags;
+ desc->len = 1;
+
+ dump_desc_dbg(ioat, desc);
+
+ /* we leave the channel locked to ensure in order submission */
+ return &desc->txd;
+}
+
+static void __devinit ioat3_dma_test_callback(void *dma_async_param)
+{
+ struct completion *cmp = dma_async_param;
+
+ complete(cmp);
+}
+
+#define IOAT_NUM_SRC_TEST 6 /* must be <= 8 */
+static int __devinit ioat_xor_val_self_test(struct ioatdma_device *device)
+{
+ int i, src_idx;
+ struct page *dest;
+ struct page *xor_srcs[IOAT_NUM_SRC_TEST];
+ struct page *xor_val_srcs[IOAT_NUM_SRC_TEST + 1];
+ dma_addr_t dma_srcs[IOAT_NUM_SRC_TEST + 1];
+ dma_addr_t dma_addr, dest_dma;
+ struct dma_async_tx_descriptor *tx;
+ struct dma_chan *dma_chan;
+ dma_cookie_t cookie;
+ u8 cmp_byte = 0;
+ u32 cmp_word;
+ u32 xor_val_result;
+ int err = 0;
+ struct completion cmp;
+ unsigned long tmo;
+ struct device *dev = &device->pdev->dev;
+ struct dma_device *dma = &device->common;
+
+ dev_dbg(dev, "%s\n", __func__);
+
+ if (!dma_has_cap(DMA_XOR, dma->cap_mask))
+ return 0;
+
+ for (src_idx = 0; src_idx < IOAT_NUM_SRC_TEST; src_idx++) {
+ xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
+ if (!xor_srcs[src_idx]) {
+ while (src_idx--)
+ __free_page(xor_srcs[src_idx]);
+ return -ENOMEM;
+ }
+ }
+
+ dest = alloc_page(GFP_KERNEL);
+ if (!dest) {
+ while (src_idx--)
+ __free_page(xor_srcs[src_idx]);
+ return -ENOMEM;
+ }
+
+ /* Fill in src buffers */
+ for (src_idx = 0; src_idx < IOAT_NUM_SRC_TEST; src_idx++) {
+ u8 *ptr = page_address(xor_srcs[src_idx]);
+ for (i = 0; i < PAGE_SIZE; i++)
+ ptr[i] = (1 << src_idx);
+ }
+
+ for (src_idx = 0; src_idx < IOAT_NUM_SRC_TEST; src_idx++)
+ cmp_byte ^= (u8) (1 << src_idx);
+
+ cmp_word = (cmp_byte << 24) | (cmp_byte << 16) |
+ (cmp_byte << 8) | cmp_byte;
+
+ memset(page_address(dest), 0, PAGE_SIZE);
+
+ dma_chan = container_of(dma->channels.next, struct dma_chan,
+ device_node);
+ if (dma->device_alloc_chan_resources(dma_chan) < 1) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* test xor */
+ dest_dma = dma_map_page(dev, dest, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ for (i = 0; i < IOAT_NUM_SRC_TEST; i++)
+ dma_srcs[i] = dma_map_page(dev, xor_srcs[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_xor(dma_chan, dest_dma, dma_srcs,
+ IOAT_NUM_SRC_TEST, PAGE_SIZE,
+ DMA_PREP_INTERRUPT);
+
+ if (!tx) {
+ dev_err(dev, "Self-test xor prep failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat3_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test xor setup failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(dev, "Self-test xor timed out\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ dma_sync_single_for_cpu(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE);
+ for (i = 0; i < (PAGE_SIZE / sizeof(u32)); i++) {
+ u32 *ptr = page_address(dest);
+ if (ptr[i] != cmp_word) {
+ dev_err(dev, "Self-test xor failed compare\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ }
+ dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_TO_DEVICE);
+
+ /* skip validate if the capability is not present */
+ if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask))
+ goto free_resources;
+
+ /* validate the sources with the destintation page */
+ for (i = 0; i < IOAT_NUM_SRC_TEST; i++)
+ xor_val_srcs[i] = xor_srcs[i];
+ xor_val_srcs[i] = dest;
+
+ xor_val_result = 1;
+
+ for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++)
+ dma_srcs[i] = dma_map_page(dev, xor_val_srcs[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_xor_val(dma_chan, dma_srcs,
+ IOAT_NUM_SRC_TEST + 1, PAGE_SIZE,
+ &xor_val_result, DMA_PREP_INTERRUPT);
+ if (!tx) {
+ dev_err(dev, "Self-test zero prep failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat3_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test zero setup failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(dev, "Self-test validate timed out\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ if (xor_val_result != 0) {
+ dev_err(dev, "Self-test validate failed compare\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ /* skip memset if the capability is not present */
+ if (!dma_has_cap(DMA_MEMSET, dma_chan->device->cap_mask))
+ goto free_resources;
+
+ /* test memset */
+ dma_addr = dma_map_page(dev, dest, 0,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+ tx = dma->device_prep_dma_memset(dma_chan, dma_addr, 0, PAGE_SIZE,
+ DMA_PREP_INTERRUPT);
+ if (!tx) {
+ dev_err(dev, "Self-test memset prep failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat3_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test memset setup failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(dev, "Self-test memset timed out\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ for (i = 0; i < PAGE_SIZE/sizeof(u32); i++) {
+ u32 *ptr = page_address(dest);
+ if (ptr[i]) {
+ dev_err(dev, "Self-test memset failed compare\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ }
+
+ /* test for non-zero parity sum */
+ xor_val_result = 0;
+ for (i = 0; i < IOAT_NUM_SRC_TEST + 1; i++)
+ dma_srcs[i] = dma_map_page(dev, xor_val_srcs[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+ tx = dma->device_prep_dma_xor_val(dma_chan, dma_srcs,
+ IOAT_NUM_SRC_TEST + 1, PAGE_SIZE,
+ &xor_val_result, DMA_PREP_INTERRUPT);
+ if (!tx) {
+ dev_err(dev, "Self-test 2nd zero prep failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ async_tx_ack(tx);
+ init_completion(&cmp);
+ tx->callback = ioat3_dma_test_callback;
+ tx->callback_param = &cmp;
+ cookie = tx->tx_submit(tx);
+ if (cookie < 0) {
+ dev_err(dev, "Self-test 2nd zero setup failed\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ dma->device_issue_pending(dma_chan);
+
+ tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+
+ if (dma->device_is_tx_complete(dma_chan, cookie, NULL, NULL) != DMA_SUCCESS) {
+ dev_err(dev, "Self-test 2nd validate timed out\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ if (xor_val_result != SUM_CHECK_P_RESULT) {
+ dev_err(dev, "Self-test validate failed compare\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+free_resources:
+ dma->device_free_chan_resources(dma_chan);
+out:
+ src_idx = IOAT_NUM_SRC_TEST;
+ while (src_idx--)
+ __free_page(xor_srcs[src_idx]);
+ __free_page(dest);
+ return err;
+}
+
+static int __devinit ioat3_dma_self_test(struct ioatdma_device *device)
+{
+ int rc = ioat_dma_self_test(device);
+
+ if (rc)
+ return rc;
+
+ rc = ioat_xor_val_self_test(device);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+int __devinit ioat3_dma_probe(struct ioatdma_device *device, int dca)
+{
+ struct pci_dev *pdev = device->pdev;
+ struct dma_device *dma;
+ struct dma_chan *c;
+ struct ioat_chan_common *chan;
+ bool is_raid_device = false;
+ int err;
+ u16 dev_id;
+ u32 cap;
+
+ device->enumerate_channels = ioat2_enumerate_channels;
+ device->self_test = ioat3_dma_self_test;
+ dma = &device->common;
+ dma->device_prep_dma_memcpy = ioat2_dma_prep_memcpy_lock;
+ dma->device_issue_pending = ioat2_issue_pending;
+ dma->device_alloc_chan_resources = ioat2_alloc_chan_resources;
+ dma->device_free_chan_resources = ioat2_free_chan_resources;
+
+ dma_cap_set(DMA_INTERRUPT, dma->cap_mask);
+ dma->device_prep_dma_interrupt = ioat3_prep_interrupt_lock;
+
+ cap = readl(device->reg_base + IOAT_DMA_CAP_OFFSET);
+ if (cap & IOAT_CAP_XOR) {
+ is_raid_device = true;
+ dma->max_xor = 8;
+ dma->xor_align = 2;
+
+ dma_cap_set(DMA_XOR, dma->cap_mask);
+ dma->device_prep_dma_xor = ioat3_prep_xor;
+
+ dma_cap_set(DMA_XOR_VAL, dma->cap_mask);
+ dma->device_prep_dma_xor_val = ioat3_prep_xor_val;
+ }
+ if (cap & IOAT_CAP_PQ) {
+ is_raid_device = true;
+ dma_set_maxpq(dma, 8, 0);
+ dma->pq_align = 2;
+
+ dma_cap_set(DMA_PQ, dma->cap_mask);
+ dma->device_prep_dma_pq = ioat3_prep_pq;
+
+ dma_cap_set(DMA_PQ_VAL, dma->cap_mask);
+ dma->device_prep_dma_pq_val = ioat3_prep_pq_val;
+
+ if (!(cap & IOAT_CAP_XOR)) {
+ dma->max_xor = 8;
+ dma->xor_align = 2;
+
+ dma_cap_set(DMA_XOR, dma->cap_mask);
+ dma->device_prep_dma_xor = ioat3_prep_pqxor;
+
+ dma_cap_set(DMA_XOR_VAL, dma->cap_mask);
+ dma->device_prep_dma_xor_val = ioat3_prep_pqxor_val;
+ }
+ }
+ if (is_raid_device && (cap & IOAT_CAP_FILL_BLOCK)) {
+ dma_cap_set(DMA_MEMSET, dma->cap_mask);
+ dma->device_prep_dma_memset = ioat3_prep_memset_lock;
+ }
+
+
+ if (is_raid_device) {
+ dma->device_is_tx_complete = ioat3_is_complete;
+ device->cleanup_tasklet = ioat3_cleanup_tasklet;
+ device->timer_fn = ioat3_timer_event;
+ } else {
+ dma->device_is_tx_complete = ioat2_is_complete;
+ device->cleanup_tasklet = ioat2_cleanup_tasklet;
+ device->timer_fn = ioat2_timer_event;
+ }
+
+ /* -= IOAT ver.3 workarounds =- */
+ /* Write CHANERRMSK_INT with 3E07h to mask out the errors
+ * that can cause stability issues for IOAT ver.3
+ */
+ pci_write_config_dword(pdev, IOAT_PCI_CHANERRMASK_INT_OFFSET, 0x3e07);
+
+ /* Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
+ * (workaround for spurious config parity error after restart)
+ */
+ pci_read_config_word(pdev, IOAT_PCI_DEVICE_ID_OFFSET, &dev_id);
+ if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0)
+ pci_write_config_dword(pdev, IOAT_PCI_DMAUNCERRSTS_OFFSET, 0x10);
+
+ err = ioat_probe(device);
+ if (err)
+ return err;
+ ioat_set_tcp_copy_break(262144);
+
+ list_for_each_entry(c, &dma->channels, device_node) {
+ chan = to_chan_common(c);
+ writel(IOAT_DMA_DCA_ANY_CPU,
+ chan->reg_base + IOAT_DCACTRL_OFFSET);
+ }
+
+ err = ioat_register(device);
+ if (err)
+ return err;
+
+ ioat_kobject_add(device, &ioat2_ktype);
+
+ if (dca)
+ device->dca = ioat3_dca_init(pdev, device->reg_base);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef _IOAT_HW_H_
+#define _IOAT_HW_H_
+
+/* PCI Configuration Space Values */
+#define IOAT_PCI_VID 0x8086
+#define IOAT_MMIO_BAR 0
+
+/* CB device ID's */
+#define IOAT_PCI_DID_5000 0x1A38
+#define IOAT_PCI_DID_CNB 0x360B
+#define IOAT_PCI_DID_SCNB 0x65FF
+#define IOAT_PCI_DID_SNB 0x402F
+
+#define IOAT_PCI_RID 0x00
+#define IOAT_PCI_SVID 0x8086
+#define IOAT_PCI_SID 0x8086
+#define IOAT_VER_1_2 0x12 /* Version 1.2 */
+#define IOAT_VER_2_0 0x20 /* Version 2.0 */
+#define IOAT_VER_3_0 0x30 /* Version 3.0 */
+#define IOAT_VER_3_2 0x32 /* Version 3.2 */
+
+struct ioat_dma_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int src_snoop_dis:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int null:1;
+ unsigned int src_brk:1;
+ unsigned int dest_brk:1;
+ unsigned int bundle:1;
+ unsigned int dest_dca:1;
+ unsigned int hint:1;
+ unsigned int rsvd2:13;
+ #define IOAT_OP_COPY 0x00
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_addr;
+ uint64_t dst_addr;
+ uint64_t next;
+ uint64_t rsv1;
+ uint64_t rsv2;
+ /* store some driver data in an unused portion of the descriptor */
+ union {
+ uint64_t user1;
+ uint64_t tx_cnt;
+ };
+ uint64_t user2;
+};
+
+struct ioat_fill_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int rsvd:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int rsvd2:2;
+ unsigned int dest_brk:1;
+ unsigned int bundle:1;
+ unsigned int rsvd4:15;
+ #define IOAT_OP_FILL 0x01
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_data;
+ uint64_t dst_addr;
+ uint64_t next;
+ uint64_t rsv1;
+ uint64_t next_dst_addr;
+ uint64_t user1;
+ uint64_t user2;
+};
+
+struct ioat_xor_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int src_snoop_dis:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int src_cnt:3;
+ unsigned int bundle:1;
+ unsigned int dest_dca:1;
+ unsigned int hint:1;
+ unsigned int rsvd:13;
+ #define IOAT_OP_XOR 0x87
+ #define IOAT_OP_XOR_VAL 0x88
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_addr;
+ uint64_t dst_addr;
+ uint64_t next;
+ uint64_t src_addr2;
+ uint64_t src_addr3;
+ uint64_t src_addr4;
+ uint64_t src_addr5;
+};
+
+struct ioat_xor_ext_descriptor {
+ uint64_t src_addr6;
+ uint64_t src_addr7;
+ uint64_t src_addr8;
+ uint64_t next;
+ uint64_t rsvd[4];
+};
+
+struct ioat_pq_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int src_snoop_dis:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int src_cnt:3;
+ unsigned int bundle:1;
+ unsigned int dest_dca:1;
+ unsigned int hint:1;
+ unsigned int p_disable:1;
+ unsigned int q_disable:1;
+ unsigned int rsvd:11;
+ #define IOAT_OP_PQ 0x89
+ #define IOAT_OP_PQ_VAL 0x8a
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_addr;
+ uint64_t p_addr;
+ uint64_t next;
+ uint64_t src_addr2;
+ uint64_t src_addr3;
+ uint8_t coef[8];
+ uint64_t q_addr;
+};
+
+struct ioat_pq_ext_descriptor {
+ uint64_t src_addr4;
+ uint64_t src_addr5;
+ uint64_t src_addr6;
+ uint64_t next;
+ uint64_t src_addr7;
+ uint64_t src_addr8;
+ uint64_t rsvd[2];
+};
+
+struct ioat_pq_update_descriptor {
+ uint32_t size;
+ union {
+ uint32_t ctl;
+ struct {
+ unsigned int int_en:1;
+ unsigned int src_snoop_dis:1;
+ unsigned int dest_snoop_dis:1;
+ unsigned int compl_write:1;
+ unsigned int fence:1;
+ unsigned int src_cnt:3;
+ unsigned int bundle:1;
+ unsigned int dest_dca:1;
+ unsigned int hint:1;
+ unsigned int p_disable:1;
+ unsigned int q_disable:1;
+ unsigned int rsvd:3;
+ unsigned int coef:8;
+ #define IOAT_OP_PQ_UP 0x8b
+ unsigned int op:8;
+ } ctl_f;
+ };
+ uint64_t src_addr;
+ uint64_t p_addr;
+ uint64_t next;
+ uint64_t src_addr2;
+ uint64_t p_src;
+ uint64_t q_src;
+ uint64_t q_addr;
+};
+
+struct ioat_raw_descriptor {
+ uint64_t field[8];
+};
+#endif
--- /dev/null
+/*
+ * Intel I/OAT DMA Linux driver
+ * Copyright(c) 2007 - 2009 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ */
+
+/*
+ * This driver supports an Intel I/OAT DMA engine, which does asynchronous
+ * copy operations.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/dca.h>
+#include "dma.h"
+#include "dma_v2.h"
+#include "registers.h"
+#include "hw.h"
+
+MODULE_VERSION(IOAT_DMA_VERSION);
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_AUTHOR("Intel Corporation");
+
+static struct pci_device_id ioat_pci_tbl[] = {
+ /* I/OAT v1 platforms */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_SCNB) },
+ { PCI_VDEVICE(UNISYS, PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR) },
+
+ /* I/OAT v2 platforms */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_SNB) },
+
+ /* I/OAT v3 platforms */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG0) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG1) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG2) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG3) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG4) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG5) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG6) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_TBG7) },
+
+ /* I/OAT v3.2 platforms */
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF0) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF1) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF2) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF3) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF4) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF5) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF6) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF7) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF8) },
+ { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_IOAT_JSF9) },
+
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, ioat_pci_tbl);
+
+static int __devinit ioat_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id);
+static void __devexit ioat_remove(struct pci_dev *pdev);
+
+static int ioat_dca_enabled = 1;
+module_param(ioat_dca_enabled, int, 0644);
+MODULE_PARM_DESC(ioat_dca_enabled, "control support of dca service (default: 1)");
+
+struct kmem_cache *ioat2_cache;
+
+#define DRV_NAME "ioatdma"
+
+static struct pci_driver ioat_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = ioat_pci_tbl,
+ .probe = ioat_pci_probe,
+ .remove = __devexit_p(ioat_remove),
+};
+
+static struct ioatdma_device *
+alloc_ioatdma(struct pci_dev *pdev, void __iomem *iobase)
+{
+ struct device *dev = &pdev->dev;
+ struct ioatdma_device *d = devm_kzalloc(dev, sizeof(*d), GFP_KERNEL);
+
+ if (!d)
+ return NULL;
+ d->pdev = pdev;
+ d->reg_base = iobase;
+ return d;
+}
+
+static int __devinit ioat_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ void __iomem * const *iomap;
+ struct device *dev = &pdev->dev;
+ struct ioatdma_device *device;
+ int err;
+
+ err = pcim_enable_device(pdev);
+ if (err)
+ return err;
+
+ err = pcim_iomap_regions(pdev, 1 << IOAT_MMIO_BAR, DRV_NAME);
+ if (err)
+ return err;
+ iomap = pcim_iomap_table(pdev);
+ if (!iomap)
+ return -ENOMEM;
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err)
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err)
+ return err;
+
+ device = devm_kzalloc(dev, sizeof(*device), GFP_KERNEL);
+ if (!device)
+ return -ENOMEM;
+
+ pci_set_master(pdev);
+
+ device = alloc_ioatdma(pdev, iomap[IOAT_MMIO_BAR]);
+ if (!device)
+ return -ENOMEM;
+ pci_set_drvdata(pdev, device);
+
+ device->version = readb(device->reg_base + IOAT_VER_OFFSET);
+ if (device->version == IOAT_VER_1_2)
+ err = ioat1_dma_probe(device, ioat_dca_enabled);
+ else if (device->version == IOAT_VER_2_0)
+ err = ioat2_dma_probe(device, ioat_dca_enabled);
+ else if (device->version >= IOAT_VER_3_0)
+ err = ioat3_dma_probe(device, ioat_dca_enabled);
+ else
+ return -ENODEV;
+
+ if (err) {
+ dev_err(dev, "Intel(R) I/OAT DMA Engine init failed\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static void __devexit ioat_remove(struct pci_dev *pdev)
+{
+ struct ioatdma_device *device = pci_get_drvdata(pdev);
+
+ if (!device)
+ return;
+
+ dev_err(&pdev->dev, "Removing dma and dca services\n");
+ if (device->dca) {
+ unregister_dca_provider(device->dca, &pdev->dev);
+ free_dca_provider(device->dca);
+ device->dca = NULL;
+ }
+ ioat_dma_remove(device);
+}
+
+static int __init ioat_init_module(void)
+{
+ int err;
+
+ pr_info("%s: Intel(R) QuickData Technology Driver %s\n",
+ DRV_NAME, IOAT_DMA_VERSION);
+
+ ioat2_cache = kmem_cache_create("ioat2", sizeof(struct ioat_ring_ent),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!ioat2_cache)
+ return -ENOMEM;
+
+ err = pci_register_driver(&ioat_pci_driver);
+ if (err)
+ kmem_cache_destroy(ioat2_cache);
+
+ return err;
+}
+module_init(ioat_init_module);
+
+static void __exit ioat_exit_module(void)
+{
+ pci_unregister_driver(&ioat_pci_driver);
+ kmem_cache_destroy(ioat2_cache);
+}
+module_exit(ioat_exit_module);
--- /dev/null
+/*
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef _IOAT_REGISTERS_H_
+#define _IOAT_REGISTERS_H_
+
+#define IOAT_PCI_DMACTRL_OFFSET 0x48
+#define IOAT_PCI_DMACTRL_DMA_EN 0x00000001
+#define IOAT_PCI_DMACTRL_MSI_EN 0x00000002
+
+#define IOAT_PCI_DEVICE_ID_OFFSET 0x02
+#define IOAT_PCI_DMAUNCERRSTS_OFFSET 0x148
+#define IOAT_PCI_CHANERRMASK_INT_OFFSET 0x184
+
+/* MMIO Device Registers */
+#define IOAT_CHANCNT_OFFSET 0x00 /* 8-bit */
+
+#define IOAT_XFERCAP_OFFSET 0x01 /* 8-bit */
+#define IOAT_XFERCAP_4KB 12
+#define IOAT_XFERCAP_8KB 13
+#define IOAT_XFERCAP_16KB 14
+#define IOAT_XFERCAP_32KB 15
+#define IOAT_XFERCAP_32GB 0
+
+#define IOAT_GENCTRL_OFFSET 0x02 /* 8-bit */
+#define IOAT_GENCTRL_DEBUG_EN 0x01
+
+#define IOAT_INTRCTRL_OFFSET 0x03 /* 8-bit */
+#define IOAT_INTRCTRL_MASTER_INT_EN 0x01 /* Master Interrupt Enable */
+#define IOAT_INTRCTRL_INT_STATUS 0x02 /* ATTNSTATUS -or- Channel Int */
+#define IOAT_INTRCTRL_INT 0x04 /* INT_STATUS -and- MASTER_INT_EN */
+#define IOAT_INTRCTRL_MSIX_VECTOR_CONTROL 0x08 /* Enable all MSI-X vectors */
+
+#define IOAT_ATTNSTATUS_OFFSET 0x04 /* Each bit is a channel */
+
+#define IOAT_VER_OFFSET 0x08 /* 8-bit */
+#define IOAT_VER_MAJOR_MASK 0xF0
+#define IOAT_VER_MINOR_MASK 0x0F
+#define GET_IOAT_VER_MAJOR(x) (((x) & IOAT_VER_MAJOR_MASK) >> 4)
+#define GET_IOAT_VER_MINOR(x) ((x) & IOAT_VER_MINOR_MASK)
+
+#define IOAT_PERPORTOFFSET_OFFSET 0x0A /* 16-bit */
+
+#define IOAT_INTRDELAY_OFFSET 0x0C /* 16-bit */
+#define IOAT_INTRDELAY_INT_DELAY_MASK 0x3FFF /* Interrupt Delay Time */
+#define IOAT_INTRDELAY_COALESE_SUPPORT 0x8000 /* Interrupt Coalescing Supported */
+
+#define IOAT_DEVICE_STATUS_OFFSET 0x0E /* 16-bit */
+#define IOAT_DEVICE_STATUS_DEGRADED_MODE 0x0001
+#define IOAT_DEVICE_MMIO_RESTRICTED 0x0002
+#define IOAT_DEVICE_MEMORY_BYPASS 0x0004
+#define IOAT_DEVICE_ADDRESS_REMAPPING 0x0008
+
+#define IOAT_DMA_CAP_OFFSET 0x10 /* 32-bit */
+#define IOAT_CAP_PAGE_BREAK 0x00000001
+#define IOAT_CAP_CRC 0x00000002
+#define IOAT_CAP_SKIP_MARKER 0x00000004
+#define IOAT_CAP_DCA 0x00000010
+#define IOAT_CAP_CRC_MOVE 0x00000020
+#define IOAT_CAP_FILL_BLOCK 0x00000040
+#define IOAT_CAP_APIC 0x00000080
+#define IOAT_CAP_XOR 0x00000100
+#define IOAT_CAP_PQ 0x00000200
+
+#define IOAT_CHANNEL_MMIO_SIZE 0x80 /* Each Channel MMIO space is this size */
+
+/* DMA Channel Registers */
+#define IOAT_CHANCTRL_OFFSET 0x00 /* 16-bit Channel Control Register */
+#define IOAT_CHANCTRL_CHANNEL_PRIORITY_MASK 0xF000
+#define IOAT3_CHANCTRL_COMPL_DCA_EN 0x0200
+#define IOAT_CHANCTRL_CHANNEL_IN_USE 0x0100
+#define IOAT_CHANCTRL_DESCRIPTOR_ADDR_SNOOP_CONTROL 0x0020
+#define IOAT_CHANCTRL_ERR_INT_EN 0x0010
+#define IOAT_CHANCTRL_ANY_ERR_ABORT_EN 0x0008
+#define IOAT_CHANCTRL_ERR_COMPLETION_EN 0x0004
+#define IOAT_CHANCTRL_INT_REARM 0x0001
+#define IOAT_CHANCTRL_RUN (IOAT_CHANCTRL_INT_REARM |\
+ IOAT_CHANCTRL_ERR_COMPLETION_EN |\
+ IOAT_CHANCTRL_ANY_ERR_ABORT_EN |\
+ IOAT_CHANCTRL_ERR_INT_EN)
+
+#define IOAT_DMA_COMP_OFFSET 0x02 /* 16-bit DMA channel compatibility */
+#define IOAT_DMA_COMP_V1 0x0001 /* Compatibility with DMA version 1 */
+#define IOAT_DMA_COMP_V2 0x0002 /* Compatibility with DMA version 2 */
+
+
+#define IOAT1_CHANSTS_OFFSET 0x04 /* 64-bit Channel Status Register */
+#define IOAT2_CHANSTS_OFFSET 0x08 /* 64-bit Channel Status Register */
+#define IOAT_CHANSTS_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHANSTS_OFFSET : IOAT2_CHANSTS_OFFSET)
+#define IOAT1_CHANSTS_OFFSET_LOW 0x04
+#define IOAT2_CHANSTS_OFFSET_LOW 0x08
+#define IOAT_CHANSTS_OFFSET_LOW(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHANSTS_OFFSET_LOW : IOAT2_CHANSTS_OFFSET_LOW)
+#define IOAT1_CHANSTS_OFFSET_HIGH 0x08
+#define IOAT2_CHANSTS_OFFSET_HIGH 0x0C
+#define IOAT_CHANSTS_OFFSET_HIGH(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHANSTS_OFFSET_HIGH : IOAT2_CHANSTS_OFFSET_HIGH)
+#define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR (~0x3fULL)
+#define IOAT_CHANSTS_SOFT_ERR 0x10ULL
+#define IOAT_CHANSTS_UNAFFILIATED_ERR 0x8ULL
+#define IOAT_CHANSTS_STATUS 0x7ULL
+#define IOAT_CHANSTS_ACTIVE 0x0
+#define IOAT_CHANSTS_DONE 0x1
+#define IOAT_CHANSTS_SUSPENDED 0x2
+#define IOAT_CHANSTS_HALTED 0x3
+
+
+
+#define IOAT_CHAN_DMACOUNT_OFFSET 0x06 /* 16-bit DMA Count register */
+
+#define IOAT_DCACTRL_OFFSET 0x30 /* 32 bit Direct Cache Access Control Register */
+#define IOAT_DCACTRL_CMPL_WRITE_ENABLE 0x10000
+#define IOAT_DCACTRL_TARGET_CPU_MASK 0xFFFF /* APIC ID */
+
+/* CB DCA Memory Space Registers */
+#define IOAT_DCAOFFSET_OFFSET 0x14
+/* CB_BAR + IOAT_DCAOFFSET value */
+#define IOAT_DCA_VER_OFFSET 0x00
+#define IOAT_DCA_VER_MAJOR_MASK 0xF0
+#define IOAT_DCA_VER_MINOR_MASK 0x0F
+
+#define IOAT_DCA_COMP_OFFSET 0x02
+#define IOAT_DCA_COMP_V1 0x1
+
+#define IOAT_FSB_CAPABILITY_OFFSET 0x04
+#define IOAT_FSB_CAPABILITY_PREFETCH 0x1
+
+#define IOAT_PCI_CAPABILITY_OFFSET 0x06
+#define IOAT_PCI_CAPABILITY_MEMWR 0x1
+
+#define IOAT_FSB_CAP_ENABLE_OFFSET 0x08
+#define IOAT_FSB_CAP_ENABLE_PREFETCH 0x1
+
+#define IOAT_PCI_CAP_ENABLE_OFFSET 0x0A
+#define IOAT_PCI_CAP_ENABLE_MEMWR 0x1
+
+#define IOAT_APICID_TAG_MAP_OFFSET 0x0C
+#define IOAT_APICID_TAG_MAP_TAG0 0x0000000F
+#define IOAT_APICID_TAG_MAP_TAG0_SHIFT 0
+#define IOAT_APICID_TAG_MAP_TAG1 0x000000F0
+#define IOAT_APICID_TAG_MAP_TAG1_SHIFT 4
+#define IOAT_APICID_TAG_MAP_TAG2 0x00000F00
+#define IOAT_APICID_TAG_MAP_TAG2_SHIFT 8
+#define IOAT_APICID_TAG_MAP_TAG3 0x0000F000
+#define IOAT_APICID_TAG_MAP_TAG3_SHIFT 12
+#define IOAT_APICID_TAG_MAP_TAG4 0x000F0000
+#define IOAT_APICID_TAG_MAP_TAG4_SHIFT 16
+#define IOAT_APICID_TAG_CB2_VALID 0x8080808080
+
+#define IOAT_DCA_GREQID_OFFSET 0x10
+#define IOAT_DCA_GREQID_SIZE 0x04
+#define IOAT_DCA_GREQID_MASK 0xFFFF
+#define IOAT_DCA_GREQID_IGNOREFUN 0x10000000
+#define IOAT_DCA_GREQID_VALID 0x20000000
+#define IOAT_DCA_GREQID_LASTID 0x80000000
+
+#define IOAT3_CSI_CAPABILITY_OFFSET 0x08
+#define IOAT3_CSI_CAPABILITY_PREFETCH 0x1
+
+#define IOAT3_PCI_CAPABILITY_OFFSET 0x0A
+#define IOAT3_PCI_CAPABILITY_MEMWR 0x1
+
+#define IOAT3_CSI_CONTROL_OFFSET 0x0C
+#define IOAT3_CSI_CONTROL_PREFETCH 0x1
+
+#define IOAT3_PCI_CONTROL_OFFSET 0x0E
+#define IOAT3_PCI_CONTROL_MEMWR 0x1
+
+#define IOAT3_APICID_TAG_MAP_OFFSET 0x10
+#define IOAT3_APICID_TAG_MAP_OFFSET_LOW 0x10
+#define IOAT3_APICID_TAG_MAP_OFFSET_HIGH 0x14
+
+#define IOAT3_DCA_GREQID_OFFSET 0x02
+
+#define IOAT1_CHAINADDR_OFFSET 0x0C /* 64-bit Descriptor Chain Address Register */
+#define IOAT2_CHAINADDR_OFFSET 0x10 /* 64-bit Descriptor Chain Address Register */
+#define IOAT_CHAINADDR_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHAINADDR_OFFSET : IOAT2_CHAINADDR_OFFSET)
+#define IOAT1_CHAINADDR_OFFSET_LOW 0x0C
+#define IOAT2_CHAINADDR_OFFSET_LOW 0x10
+#define IOAT_CHAINADDR_OFFSET_LOW(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHAINADDR_OFFSET_LOW : IOAT2_CHAINADDR_OFFSET_LOW)
+#define IOAT1_CHAINADDR_OFFSET_HIGH 0x10
+#define IOAT2_CHAINADDR_OFFSET_HIGH 0x14
+#define IOAT_CHAINADDR_OFFSET_HIGH(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHAINADDR_OFFSET_HIGH : IOAT2_CHAINADDR_OFFSET_HIGH)
+
+#define IOAT1_CHANCMD_OFFSET 0x14 /* 8-bit DMA Channel Command Register */
+#define IOAT2_CHANCMD_OFFSET 0x04 /* 8-bit DMA Channel Command Register */
+#define IOAT_CHANCMD_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
+ ? IOAT1_CHANCMD_OFFSET : IOAT2_CHANCMD_OFFSET)
+#define IOAT_CHANCMD_RESET 0x20
+#define IOAT_CHANCMD_RESUME 0x10
+#define IOAT_CHANCMD_ABORT 0x08
+#define IOAT_CHANCMD_SUSPEND 0x04
+#define IOAT_CHANCMD_APPEND 0x02
+#define IOAT_CHANCMD_START 0x01
+
+#define IOAT_CHANCMP_OFFSET 0x18 /* 64-bit Channel Completion Address Register */
+#define IOAT_CHANCMP_OFFSET_LOW 0x18
+#define IOAT_CHANCMP_OFFSET_HIGH 0x1C
+
+#define IOAT_CDAR_OFFSET 0x20 /* 64-bit Current Descriptor Address Register */
+#define IOAT_CDAR_OFFSET_LOW 0x20
+#define IOAT_CDAR_OFFSET_HIGH 0x24
+
+#define IOAT_CHANERR_OFFSET 0x28 /* 32-bit Channel Error Register */
+#define IOAT_CHANERR_SRC_ADDR_ERR 0x0001
+#define IOAT_CHANERR_DEST_ADDR_ERR 0x0002
+#define IOAT_CHANERR_NEXT_ADDR_ERR 0x0004
+#define IOAT_CHANERR_NEXT_DESC_ALIGN_ERR 0x0008
+#define IOAT_CHANERR_CHAIN_ADDR_VALUE_ERR 0x0010
+#define IOAT_CHANERR_CHANCMD_ERR 0x0020
+#define IOAT_CHANERR_CHIPSET_UNCORRECTABLE_DATA_INTEGRITY_ERR 0x0040
+#define IOAT_CHANERR_DMA_UNCORRECTABLE_DATA_INTEGRITY_ERR 0x0080
+#define IOAT_CHANERR_READ_DATA_ERR 0x0100
+#define IOAT_CHANERR_WRITE_DATA_ERR 0x0200
+#define IOAT_CHANERR_CONTROL_ERR 0x0400
+#define IOAT_CHANERR_LENGTH_ERR 0x0800
+#define IOAT_CHANERR_COMPLETION_ADDR_ERR 0x1000
+#define IOAT_CHANERR_INT_CONFIGURATION_ERR 0x2000
+#define IOAT_CHANERR_SOFT_ERR 0x4000
+#define IOAT_CHANERR_UNAFFILIATED_ERR 0x8000
+#define IOAT_CHANERR_XOR_P_OR_CRC_ERR 0x10000
+#define IOAT_CHANERR_XOR_Q_ERR 0x20000
+#define IOAT_CHANERR_DESCRIPTOR_COUNT_ERR 0x40000
+
+#define IOAT_CHANERR_HANDLE_MASK (IOAT_CHANERR_XOR_P_OR_CRC_ERR | IOAT_CHANERR_XOR_Q_ERR)
+
+#define IOAT_CHANERR_MASK_OFFSET 0x2C /* 32-bit Channel Error Register */
+
+#endif /* _IOAT_REGISTERS_H_ */
+++ /dev/null
-/*
- * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 - 2009 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/dca.h>
-
-/* either a kernel change is needed, or we need something like this in kernel */
-#ifndef CONFIG_SMP
-#include <asm/smp.h>
-#undef cpu_physical_id
-#define cpu_physical_id(cpu) (cpuid_ebx(1) >> 24)
-#endif
-
-#include "ioatdma.h"
-#include "ioatdma_registers.h"
-
-/*
- * Bit 7 of a tag map entry is the "valid" bit, if it is set then bits 0:6
- * contain the bit number of the APIC ID to map into the DCA tag. If the valid
- * bit is not set, then the value must be 0 or 1 and defines the bit in the tag.
- */
-#define DCA_TAG_MAP_VALID 0x80
-
-#define DCA3_TAG_MAP_BIT_TO_INV 0x80
-#define DCA3_TAG_MAP_BIT_TO_SEL 0x40
-#define DCA3_TAG_MAP_LITERAL_VAL 0x1
-
-#define DCA_TAG_MAP_MASK 0xDF
-
-/* expected tag map bytes for I/OAT ver.2 */
-#define DCA2_TAG_MAP_BYTE0 0x80
-#define DCA2_TAG_MAP_BYTE1 0x0
-#define DCA2_TAG_MAP_BYTE2 0x81
-#define DCA2_TAG_MAP_BYTE3 0x82
-#define DCA2_TAG_MAP_BYTE4 0x82
-
-/* verify if tag map matches expected values */
-static inline int dca2_tag_map_valid(u8 *tag_map)
-{
- return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
- (tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
- (tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
- (tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
- (tag_map[4] == DCA2_TAG_MAP_BYTE4));
-}
-
-/*
- * "Legacy" DCA systems do not implement the DCA register set in the
- * I/OAT device. Software needs direct support for their tag mappings.
- */
-
-#define APICID_BIT(x) (DCA_TAG_MAP_VALID | (x))
-#define IOAT_TAG_MAP_LEN 8
-
-static u8 ioat_tag_map_BNB[IOAT_TAG_MAP_LEN] = {
- 1, APICID_BIT(1), APICID_BIT(2), APICID_BIT(2), };
-static u8 ioat_tag_map_SCNB[IOAT_TAG_MAP_LEN] = {
- 1, APICID_BIT(1), APICID_BIT(2), APICID_BIT(2), };
-static u8 ioat_tag_map_CNB[IOAT_TAG_MAP_LEN] = {
- 1, APICID_BIT(1), APICID_BIT(3), APICID_BIT(4), APICID_BIT(2), };
-static u8 ioat_tag_map_UNISYS[IOAT_TAG_MAP_LEN] = { 0 };
-
-/* pack PCI B/D/F into a u16 */
-static inline u16 dcaid_from_pcidev(struct pci_dev *pci)
-{
- return (pci->bus->number << 8) | pci->devfn;
-}
-
-static int dca_enabled_in_bios(struct pci_dev *pdev)
-{
- /* CPUID level 9 returns DCA configuration */
- /* Bit 0 indicates DCA enabled by the BIOS */
- unsigned long cpuid_level_9;
- int res;
-
- cpuid_level_9 = cpuid_eax(9);
- res = test_bit(0, &cpuid_level_9);
- if (!res)
- dev_err(&pdev->dev, "DCA is disabled in BIOS\n");
-
- return res;
-}
-
-static int system_has_dca_enabled(struct pci_dev *pdev)
-{
- if (boot_cpu_has(X86_FEATURE_DCA))
- return dca_enabled_in_bios(pdev);
-
- dev_err(&pdev->dev, "boot cpu doesn't have X86_FEATURE_DCA\n");
- return 0;
-}
-
-struct ioat_dca_slot {
- struct pci_dev *pdev; /* requester device */
- u16 rid; /* requester id, as used by IOAT */
-};
-
-#define IOAT_DCA_MAX_REQ 6
-#define IOAT3_DCA_MAX_REQ 2
-
-struct ioat_dca_priv {
- void __iomem *iobase;
- void __iomem *dca_base;
- int max_requesters;
- int requester_count;
- u8 tag_map[IOAT_TAG_MAP_LEN];
- struct ioat_dca_slot req_slots[0];
-};
-
-/* 5000 series chipset DCA Port Requester ID Table Entry Format
- * [15:8] PCI-Express Bus Number
- * [7:3] PCI-Express Device Number
- * [2:0] PCI-Express Function Number
- *
- * 5000 series chipset DCA control register format
- * [7:1] Reserved (0)
- * [0] Ignore Function Number
- */
-
-static int ioat_dca_add_requester(struct dca_provider *dca, struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 id;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
- id = dcaid_from_pcidev(pdev);
-
- if (ioatdca->requester_count == ioatdca->max_requesters)
- return -ENODEV;
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == NULL) {
- /* found an empty slot */
- ioatdca->requester_count++;
- ioatdca->req_slots[i].pdev = pdev;
- ioatdca->req_slots[i].rid = id;
- writew(id, ioatdca->dca_base + (i * 4));
- /* make sure the ignore function bit is off */
- writeb(0, ioatdca->dca_base + (i * 4) + 2);
- return i;
- }
- }
- /* Error, ioatdma->requester_count is out of whack */
- return -EFAULT;
-}
-
-static int ioat_dca_remove_requester(struct dca_provider *dca,
- struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == pdev) {
- writew(0, ioatdca->dca_base + (i * 4));
- ioatdca->req_slots[i].pdev = NULL;
- ioatdca->req_slots[i].rid = 0;
- ioatdca->requester_count--;
- return i;
- }
- }
- return -ENODEV;
-}
-
-static u8 ioat_dca_get_tag(struct dca_provider *dca,
- struct device *dev,
- int cpu)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- int i, apic_id, bit, value;
- u8 entry, tag;
-
- tag = 0;
- apic_id = cpu_physical_id(cpu);
-
- for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
- entry = ioatdca->tag_map[i];
- if (entry & DCA_TAG_MAP_VALID) {
- bit = entry & ~DCA_TAG_MAP_VALID;
- value = (apic_id & (1 << bit)) ? 1 : 0;
- } else {
- value = entry ? 1 : 0;
- }
- tag |= (value << i);
- }
- return tag;
-}
-
-static int ioat_dca_dev_managed(struct dca_provider *dca,
- struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
-
- pdev = to_pci_dev(dev);
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == pdev)
- return 1;
- }
- return 0;
-}
-
-static struct dca_ops ioat_dca_ops = {
- .add_requester = ioat_dca_add_requester,
- .remove_requester = ioat_dca_remove_requester,
- .get_tag = ioat_dca_get_tag,
- .dev_managed = ioat_dca_dev_managed,
-};
-
-
-struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase)
-{
- struct dca_provider *dca;
- struct ioat_dca_priv *ioatdca;
- u8 *tag_map = NULL;
- int i;
- int err;
- u8 version;
- u8 max_requesters;
-
- if (!system_has_dca_enabled(pdev))
- return NULL;
-
- /* I/OAT v1 systems must have a known tag_map to support DCA */
- switch (pdev->vendor) {
- case PCI_VENDOR_ID_INTEL:
- switch (pdev->device) {
- case PCI_DEVICE_ID_INTEL_IOAT:
- tag_map = ioat_tag_map_BNB;
- break;
- case PCI_DEVICE_ID_INTEL_IOAT_CNB:
- tag_map = ioat_tag_map_CNB;
- break;
- case PCI_DEVICE_ID_INTEL_IOAT_SCNB:
- tag_map = ioat_tag_map_SCNB;
- break;
- }
- break;
- case PCI_VENDOR_ID_UNISYS:
- switch (pdev->device) {
- case PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR:
- tag_map = ioat_tag_map_UNISYS;
- break;
- }
- break;
- }
- if (tag_map == NULL)
- return NULL;
-
- version = readb(iobase + IOAT_VER_OFFSET);
- if (version == IOAT_VER_3_0)
- max_requesters = IOAT3_DCA_MAX_REQ;
- else
- max_requesters = IOAT_DCA_MAX_REQ;
-
- dca = alloc_dca_provider(&ioat_dca_ops,
- sizeof(*ioatdca) +
- (sizeof(struct ioat_dca_slot) * max_requesters));
- if (!dca)
- return NULL;
-
- ioatdca = dca_priv(dca);
- ioatdca->max_requesters = max_requesters;
- ioatdca->dca_base = iobase + 0x54;
-
- /* copy over the APIC ID to DCA tag mapping */
- for (i = 0; i < IOAT_TAG_MAP_LEN; i++)
- ioatdca->tag_map[i] = tag_map[i];
-
- err = register_dca_provider(dca, &pdev->dev);
- if (err) {
- free_dca_provider(dca);
- return NULL;
- }
-
- return dca;
-}
-
-
-static int ioat2_dca_add_requester(struct dca_provider *dca, struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 id;
- u16 global_req_table;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
- id = dcaid_from_pcidev(pdev);
-
- if (ioatdca->requester_count == ioatdca->max_requesters)
- return -ENODEV;
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == NULL) {
- /* found an empty slot */
- ioatdca->requester_count++;
- ioatdca->req_slots[i].pdev = pdev;
- ioatdca->req_slots[i].rid = id;
- global_req_table =
- readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
- writel(id | IOAT_DCA_GREQID_VALID,
- ioatdca->iobase + global_req_table + (i * 4));
- return i;
- }
- }
- /* Error, ioatdma->requester_count is out of whack */
- return -EFAULT;
-}
-
-static int ioat2_dca_remove_requester(struct dca_provider *dca,
- struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 global_req_table;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == pdev) {
- global_req_table =
- readw(ioatdca->dca_base + IOAT_DCA_GREQID_OFFSET);
- writel(0, ioatdca->iobase + global_req_table + (i * 4));
- ioatdca->req_slots[i].pdev = NULL;
- ioatdca->req_slots[i].rid = 0;
- ioatdca->requester_count--;
- return i;
- }
- }
- return -ENODEV;
-}
-
-static u8 ioat2_dca_get_tag(struct dca_provider *dca,
- struct device *dev,
- int cpu)
-{
- u8 tag;
-
- tag = ioat_dca_get_tag(dca, dev, cpu);
- tag = (~tag) & 0x1F;
- return tag;
-}
-
-static struct dca_ops ioat2_dca_ops = {
- .add_requester = ioat2_dca_add_requester,
- .remove_requester = ioat2_dca_remove_requester,
- .get_tag = ioat2_dca_get_tag,
- .dev_managed = ioat_dca_dev_managed,
-};
-
-static int ioat2_dca_count_dca_slots(void __iomem *iobase, u16 dca_offset)
-{
- int slots = 0;
- u32 req;
- u16 global_req_table;
-
- global_req_table = readw(iobase + dca_offset + IOAT_DCA_GREQID_OFFSET);
- if (global_req_table == 0)
- return 0;
- do {
- req = readl(iobase + global_req_table + (slots * sizeof(u32)));
- slots++;
- } while ((req & IOAT_DCA_GREQID_LASTID) == 0);
-
- return slots;
-}
-
-struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase)
-{
- struct dca_provider *dca;
- struct ioat_dca_priv *ioatdca;
- int slots;
- int i;
- int err;
- u32 tag_map;
- u16 dca_offset;
- u16 csi_fsb_control;
- u16 pcie_control;
- u8 bit;
-
- if (!system_has_dca_enabled(pdev))
- return NULL;
-
- dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
- if (dca_offset == 0)
- return NULL;
-
- slots = ioat2_dca_count_dca_slots(iobase, dca_offset);
- if (slots == 0)
- return NULL;
-
- dca = alloc_dca_provider(&ioat2_dca_ops,
- sizeof(*ioatdca)
- + (sizeof(struct ioat_dca_slot) * slots));
- if (!dca)
- return NULL;
-
- ioatdca = dca_priv(dca);
- ioatdca->iobase = iobase;
- ioatdca->dca_base = iobase + dca_offset;
- ioatdca->max_requesters = slots;
-
- /* some bios might not know to turn these on */
- csi_fsb_control = readw(ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
- if ((csi_fsb_control & IOAT_FSB_CAP_ENABLE_PREFETCH) == 0) {
- csi_fsb_control |= IOAT_FSB_CAP_ENABLE_PREFETCH;
- writew(csi_fsb_control,
- ioatdca->dca_base + IOAT_FSB_CAP_ENABLE_OFFSET);
- }
- pcie_control = readw(ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
- if ((pcie_control & IOAT_PCI_CAP_ENABLE_MEMWR) == 0) {
- pcie_control |= IOAT_PCI_CAP_ENABLE_MEMWR;
- writew(pcie_control,
- ioatdca->dca_base + IOAT_PCI_CAP_ENABLE_OFFSET);
- }
-
-
- /* TODO version, compatibility and configuration checks */
-
- /* copy out the APIC to DCA tag map */
- tag_map = readl(ioatdca->dca_base + IOAT_APICID_TAG_MAP_OFFSET);
- for (i = 0; i < 5; i++) {
- bit = (tag_map >> (4 * i)) & 0x0f;
- if (bit < 8)
- ioatdca->tag_map[i] = bit | DCA_TAG_MAP_VALID;
- else
- ioatdca->tag_map[i] = 0;
- }
-
- if (!dca2_tag_map_valid(ioatdca->tag_map)) {
- dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
- "disabling DCA\n");
- free_dca_provider(dca);
- return NULL;
- }
-
- err = register_dca_provider(dca, &pdev->dev);
- if (err) {
- free_dca_provider(dca);
- return NULL;
- }
-
- return dca;
-}
-
-static int ioat3_dca_add_requester(struct dca_provider *dca, struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 id;
- u16 global_req_table;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
- id = dcaid_from_pcidev(pdev);
-
- if (ioatdca->requester_count == ioatdca->max_requesters)
- return -ENODEV;
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == NULL) {
- /* found an empty slot */
- ioatdca->requester_count++;
- ioatdca->req_slots[i].pdev = pdev;
- ioatdca->req_slots[i].rid = id;
- global_req_table =
- readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
- writel(id | IOAT_DCA_GREQID_VALID,
- ioatdca->iobase + global_req_table + (i * 4));
- return i;
- }
- }
- /* Error, ioatdma->requester_count is out of whack */
- return -EFAULT;
-}
-
-static int ioat3_dca_remove_requester(struct dca_provider *dca,
- struct device *dev)
-{
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- struct pci_dev *pdev;
- int i;
- u16 global_req_table;
-
- /* This implementation only supports PCI-Express */
- if (dev->bus != &pci_bus_type)
- return -ENODEV;
- pdev = to_pci_dev(dev);
-
- for (i = 0; i < ioatdca->max_requesters; i++) {
- if (ioatdca->req_slots[i].pdev == pdev) {
- global_req_table =
- readw(ioatdca->dca_base + IOAT3_DCA_GREQID_OFFSET);
- writel(0, ioatdca->iobase + global_req_table + (i * 4));
- ioatdca->req_slots[i].pdev = NULL;
- ioatdca->req_slots[i].rid = 0;
- ioatdca->requester_count--;
- return i;
- }
- }
- return -ENODEV;
-}
-
-static u8 ioat3_dca_get_tag(struct dca_provider *dca,
- struct device *dev,
- int cpu)
-{
- u8 tag;
-
- struct ioat_dca_priv *ioatdca = dca_priv(dca);
- int i, apic_id, bit, value;
- u8 entry;
-
- tag = 0;
- apic_id = cpu_physical_id(cpu);
-
- for (i = 0; i < IOAT_TAG_MAP_LEN; i++) {
- entry = ioatdca->tag_map[i];
- if (entry & DCA3_TAG_MAP_BIT_TO_SEL) {
- bit = entry &
- ~(DCA3_TAG_MAP_BIT_TO_SEL | DCA3_TAG_MAP_BIT_TO_INV);
- value = (apic_id & (1 << bit)) ? 1 : 0;
- } else if (entry & DCA3_TAG_MAP_BIT_TO_INV) {
- bit = entry & ~DCA3_TAG_MAP_BIT_TO_INV;
- value = (apic_id & (1 << bit)) ? 0 : 1;
- } else {
- value = (entry & DCA3_TAG_MAP_LITERAL_VAL) ? 1 : 0;
- }
- tag |= (value << i);
- }
-
- return tag;
-}
-
-static struct dca_ops ioat3_dca_ops = {
- .add_requester = ioat3_dca_add_requester,
- .remove_requester = ioat3_dca_remove_requester,
- .get_tag = ioat3_dca_get_tag,
- .dev_managed = ioat_dca_dev_managed,
-};
-
-static int ioat3_dca_count_dca_slots(void *iobase, u16 dca_offset)
-{
- int slots = 0;
- u32 req;
- u16 global_req_table;
-
- global_req_table = readw(iobase + dca_offset + IOAT3_DCA_GREQID_OFFSET);
- if (global_req_table == 0)
- return 0;
-
- do {
- req = readl(iobase + global_req_table + (slots * sizeof(u32)));
- slots++;
- } while ((req & IOAT_DCA_GREQID_LASTID) == 0);
-
- return slots;
-}
-
-struct dca_provider *ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase)
-{
- struct dca_provider *dca;
- struct ioat_dca_priv *ioatdca;
- int slots;
- int i;
- int err;
- u16 dca_offset;
- u16 csi_fsb_control;
- u16 pcie_control;
- u8 bit;
-
- union {
- u64 full;
- struct {
- u32 low;
- u32 high;
- };
- } tag_map;
-
- if (!system_has_dca_enabled(pdev))
- return NULL;
-
- dca_offset = readw(iobase + IOAT_DCAOFFSET_OFFSET);
- if (dca_offset == 0)
- return NULL;
-
- slots = ioat3_dca_count_dca_slots(iobase, dca_offset);
- if (slots == 0)
- return NULL;
-
- dca = alloc_dca_provider(&ioat3_dca_ops,
- sizeof(*ioatdca)
- + (sizeof(struct ioat_dca_slot) * slots));
- if (!dca)
- return NULL;
-
- ioatdca = dca_priv(dca);
- ioatdca->iobase = iobase;
- ioatdca->dca_base = iobase + dca_offset;
- ioatdca->max_requesters = slots;
-
- /* some bios might not know to turn these on */
- csi_fsb_control = readw(ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
- if ((csi_fsb_control & IOAT3_CSI_CONTROL_PREFETCH) == 0) {
- csi_fsb_control |= IOAT3_CSI_CONTROL_PREFETCH;
- writew(csi_fsb_control,
- ioatdca->dca_base + IOAT3_CSI_CONTROL_OFFSET);
- }
- pcie_control = readw(ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
- if ((pcie_control & IOAT3_PCI_CONTROL_MEMWR) == 0) {
- pcie_control |= IOAT3_PCI_CONTROL_MEMWR;
- writew(pcie_control,
- ioatdca->dca_base + IOAT3_PCI_CONTROL_OFFSET);
- }
-
-
- /* TODO version, compatibility and configuration checks */
-
- /* copy out the APIC to DCA tag map */
- tag_map.low =
- readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_LOW);
- tag_map.high =
- readl(ioatdca->dca_base + IOAT3_APICID_TAG_MAP_OFFSET_HIGH);
- for (i = 0; i < 8; i++) {
- bit = tag_map.full >> (8 * i);
- ioatdca->tag_map[i] = bit & DCA_TAG_MAP_MASK;
- }
-
- err = register_dca_provider(dca, &pdev->dev);
- if (err) {
- free_dca_provider(dca);
- return NULL;
- }
-
- return dca;
-}
+++ /dev/null
-/*
- * Intel I/OAT DMA Linux driver
- * Copyright(c) 2004 - 2009 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
- *
- */
-
-/*
- * This driver supports an Intel I/OAT DMA engine, which does asynchronous
- * copy operations.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/dmaengine.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/workqueue.h>
-#include <linux/i7300_idle.h>
-#include "ioatdma.h"
-#include "ioatdma_registers.h"
-#include "ioatdma_hw.h"
-
-#define to_ioat_chan(chan) container_of(chan, struct ioat_dma_chan, common)
-#define to_ioatdma_device(dev) container_of(dev, struct ioatdma_device, common)
-#define to_ioat_desc(lh) container_of(lh, struct ioat_desc_sw, node)
-#define tx_to_ioat_desc(tx) container_of(tx, struct ioat_desc_sw, async_tx)
-
-#define chan_num(ch) ((int)((ch)->reg_base - (ch)->device->reg_base) / 0x80)
-static int ioat_pending_level = 4;
-module_param(ioat_pending_level, int, 0644);
-MODULE_PARM_DESC(ioat_pending_level,
- "high-water mark for pushing ioat descriptors (default: 4)");
-
-#define RESET_DELAY msecs_to_jiffies(100)
-#define WATCHDOG_DELAY round_jiffies(msecs_to_jiffies(2000))
-static void ioat_dma_chan_reset_part2(struct work_struct *work);
-static void ioat_dma_chan_watchdog(struct work_struct *work);
-
-/*
- * workaround for IOAT ver.3.0 null descriptor issue
- * (channel returns error when size is 0)
- */
-#define NULL_DESC_BUFFER_SIZE 1
-
-/* internal functions */
-static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan);
-static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan);
-
-static struct ioat_desc_sw *
-ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan);
-static struct ioat_desc_sw *
-ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan);
-
-static inline struct ioat_dma_chan *ioat_lookup_chan_by_index(
- struct ioatdma_device *device,
- int index)
-{
- return device->idx[index];
-}
-
-/**
- * ioat_dma_do_interrupt - handler used for single vector interrupt mode
- * @irq: interrupt id
- * @data: interrupt data
- */
-static irqreturn_t ioat_dma_do_interrupt(int irq, void *data)
-{
- struct ioatdma_device *instance = data;
- struct ioat_dma_chan *ioat_chan;
- unsigned long attnstatus;
- int bit;
- u8 intrctrl;
-
- intrctrl = readb(instance->reg_base + IOAT_INTRCTRL_OFFSET);
-
- if (!(intrctrl & IOAT_INTRCTRL_MASTER_INT_EN))
- return IRQ_NONE;
-
- if (!(intrctrl & IOAT_INTRCTRL_INT_STATUS)) {
- writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
- return IRQ_NONE;
- }
-
- attnstatus = readl(instance->reg_base + IOAT_ATTNSTATUS_OFFSET);
- for_each_bit(bit, &attnstatus, BITS_PER_LONG) {
- ioat_chan = ioat_lookup_chan_by_index(instance, bit);
- tasklet_schedule(&ioat_chan->cleanup_task);
- }
-
- writeb(intrctrl, instance->reg_base + IOAT_INTRCTRL_OFFSET);
- return IRQ_HANDLED;
-}
-
-/**
- * ioat_dma_do_interrupt_msix - handler used for vector-per-channel interrupt mode
- * @irq: interrupt id
- * @data: interrupt data
- */
-static irqreturn_t ioat_dma_do_interrupt_msix(int irq, void *data)
-{
- struct ioat_dma_chan *ioat_chan = data;
-
- tasklet_schedule(&ioat_chan->cleanup_task);
-
- return IRQ_HANDLED;
-}
-
-static void ioat_dma_cleanup_tasklet(unsigned long data);
-
-/**
- * ioat_dma_enumerate_channels - find and initialize the device's channels
- * @device: the device to be enumerated
- */
-static int ioat_dma_enumerate_channels(struct ioatdma_device *device)
-{
- u8 xfercap_scale;
- u32 xfercap;
- int i;
- struct ioat_dma_chan *ioat_chan;
-
- /*
- * IOAT ver.3 workarounds
- */
- if (device->version == IOAT_VER_3_0) {
- u32 chan_err_mask;
- u16 dev_id;
- u32 dmauncerrsts;
-
- /*
- * Write CHANERRMSK_INT with 3E07h to mask out the errors
- * that can cause stability issues for IOAT ver.3
- */
- chan_err_mask = 0x3E07;
- pci_write_config_dword(device->pdev,
- IOAT_PCI_CHANERRMASK_INT_OFFSET,
- chan_err_mask);
-
- /*
- * Clear DMAUNCERRSTS Cfg-Reg Parity Error status bit
- * (workaround for spurious config parity error after restart)
- */
- pci_read_config_word(device->pdev,
- IOAT_PCI_DEVICE_ID_OFFSET,
- &dev_id);
- if (dev_id == PCI_DEVICE_ID_INTEL_IOAT_TBG0) {
- dmauncerrsts = 0x10;
- pci_write_config_dword(device->pdev,
- IOAT_PCI_DMAUNCERRSTS_OFFSET,
- dmauncerrsts);
- }
- }
-
- device->common.chancnt = readb(device->reg_base + IOAT_CHANCNT_OFFSET);
- xfercap_scale = readb(device->reg_base + IOAT_XFERCAP_OFFSET);
- xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
-
-#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
- if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) {
- device->common.chancnt--;
- }
-#endif
- for (i = 0; i < device->common.chancnt; i++) {
- ioat_chan = kzalloc(sizeof(*ioat_chan), GFP_KERNEL);
- if (!ioat_chan) {
- device->common.chancnt = i;
- break;
- }
-
- ioat_chan->device = device;
- ioat_chan->reg_base = device->reg_base + (0x80 * (i + 1));
- ioat_chan->xfercap = xfercap;
- ioat_chan->desccount = 0;
- INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
- if (ioat_chan->device->version == IOAT_VER_2_0)
- writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
- IOAT_DMA_DCA_ANY_CPU,
- ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
- else if (ioat_chan->device->version == IOAT_VER_3_0)
- writel(IOAT_DMA_DCA_ANY_CPU,
- ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
- spin_lock_init(&ioat_chan->cleanup_lock);
- spin_lock_init(&ioat_chan->desc_lock);
- INIT_LIST_HEAD(&ioat_chan->free_desc);
- INIT_LIST_HEAD(&ioat_chan->used_desc);
- /* This should be made common somewhere in dmaengine.c */
- ioat_chan->common.device = &device->common;
- list_add_tail(&ioat_chan->common.device_node,
- &device->common.channels);
- device->idx[i] = ioat_chan;
- tasklet_init(&ioat_chan->cleanup_task,
- ioat_dma_cleanup_tasklet,
- (unsigned long) ioat_chan);
- tasklet_disable(&ioat_chan->cleanup_task);
- }
- return device->common.chancnt;
-}
-
-/**
- * ioat_dma_memcpy_issue_pending - push potentially unrecognized appended
- * descriptors to hw
- * @chan: DMA channel handle
- */
-static inline void __ioat1_dma_memcpy_issue_pending(
- struct ioat_dma_chan *ioat_chan)
-{
- ioat_chan->pending = 0;
- writeb(IOAT_CHANCMD_APPEND, ioat_chan->reg_base + IOAT1_CHANCMD_OFFSET);
-}
-
-static void ioat1_dma_memcpy_issue_pending(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
-
- if (ioat_chan->pending > 0) {
- spin_lock_bh(&ioat_chan->desc_lock);
- __ioat1_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
- }
-}
-
-static inline void __ioat2_dma_memcpy_issue_pending(
- struct ioat_dma_chan *ioat_chan)
-{
- ioat_chan->pending = 0;
- writew(ioat_chan->dmacount,
- ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
-}
-
-static void ioat2_dma_memcpy_issue_pending(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
-
- if (ioat_chan->pending > 0) {
- spin_lock_bh(&ioat_chan->desc_lock);
- __ioat2_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
- }
-}
-
-
-/**
- * ioat_dma_chan_reset_part2 - reinit the channel after a reset
- */
-static void ioat_dma_chan_reset_part2(struct work_struct *work)
-{
- struct ioat_dma_chan *ioat_chan =
- container_of(work, struct ioat_dma_chan, work.work);
- struct ioat_desc_sw *desc;
-
- spin_lock_bh(&ioat_chan->cleanup_lock);
- spin_lock_bh(&ioat_chan->desc_lock);
-
- ioat_chan->completion_virt->low = 0;
- ioat_chan->completion_virt->high = 0;
- ioat_chan->pending = 0;
-
- /*
- * count the descriptors waiting, and be sure to do it
- * right for both the CB1 line and the CB2 ring
- */
- ioat_chan->dmacount = 0;
- if (ioat_chan->used_desc.prev) {
- desc = to_ioat_desc(ioat_chan->used_desc.prev);
- do {
- ioat_chan->dmacount++;
- desc = to_ioat_desc(desc->node.next);
- } while (&desc->node != ioat_chan->used_desc.next);
- }
-
- /*
- * write the new starting descriptor address
- * this puts channel engine into ARMED state
- */
- desc = to_ioat_desc(ioat_chan->used_desc.prev);
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_LOW);
- writel(((u64) desc->async_tx.phys) >> 32,
- ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_HIGH);
-
- writeb(IOAT_CHANCMD_START, ioat_chan->reg_base
- + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
- break;
- case IOAT_VER_2_0:
- writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
- writel(((u64) desc->async_tx.phys) >> 32,
- ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_HIGH);
-
- /* tell the engine to go with what's left to be done */
- writew(ioat_chan->dmacount,
- ioat_chan->reg_base + IOAT_CHAN_DMACOUNT_OFFSET);
-
- break;
- }
- dev_err(&ioat_chan->device->pdev->dev,
- "chan%d reset - %d descs waiting, %d total desc\n",
- chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
-
- spin_unlock_bh(&ioat_chan->desc_lock);
- spin_unlock_bh(&ioat_chan->cleanup_lock);
-}
-
-/**
- * ioat_dma_reset_channel - restart a channel
- * @ioat_chan: IOAT DMA channel handle
- */
-static void ioat_dma_reset_channel(struct ioat_dma_chan *ioat_chan)
-{
- u32 chansts, chanerr;
-
- if (!ioat_chan->used_desc.prev)
- return;
-
- chanerr = readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
- chansts = (ioat_chan->completion_virt->low
- & IOAT_CHANSTS_DMA_TRANSFER_STATUS);
- if (chanerr) {
- dev_err(&ioat_chan->device->pdev->dev,
- "chan%d, CHANSTS = 0x%08x CHANERR = 0x%04x, clearing\n",
- chan_num(ioat_chan), chansts, chanerr);
- writel(chanerr, ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
- }
-
- /*
- * whack it upside the head with a reset
- * and wait for things to settle out.
- * force the pending count to a really big negative
- * to make sure no one forces an issue_pending
- * while we're waiting.
- */
-
- spin_lock_bh(&ioat_chan->desc_lock);
- ioat_chan->pending = INT_MIN;
- writeb(IOAT_CHANCMD_RESET,
- ioat_chan->reg_base
- + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- /* schedule the 2nd half instead of sleeping a long time */
- schedule_delayed_work(&ioat_chan->work, RESET_DELAY);
-}
-
-/**
- * ioat_dma_chan_watchdog - watch for stuck channels
- */
-static void ioat_dma_chan_watchdog(struct work_struct *work)
-{
- struct ioatdma_device *device =
- container_of(work, struct ioatdma_device, work.work);
- struct ioat_dma_chan *ioat_chan;
- int i;
-
- union {
- u64 full;
- struct {
- u32 low;
- u32 high;
- };
- } completion_hw;
- unsigned long compl_desc_addr_hw;
-
- for (i = 0; i < device->common.chancnt; i++) {
- ioat_chan = ioat_lookup_chan_by_index(device, i);
-
- if (ioat_chan->device->version == IOAT_VER_1_2
- /* have we started processing anything yet */
- && ioat_chan->last_completion
- /* have we completed any since last watchdog cycle? */
- && (ioat_chan->last_completion ==
- ioat_chan->watchdog_completion)
- /* has TCP stuck on one cookie since last watchdog? */
- && (ioat_chan->watchdog_tcp_cookie ==
- ioat_chan->watchdog_last_tcp_cookie)
- && (ioat_chan->watchdog_tcp_cookie !=
- ioat_chan->completed_cookie)
- /* is there something in the chain to be processed? */
- /* CB1 chain always has at least the last one processed */
- && (ioat_chan->used_desc.prev != ioat_chan->used_desc.next)
- && ioat_chan->pending == 0) {
-
- /*
- * check CHANSTS register for completed
- * descriptor address.
- * if it is different than completion writeback,
- * it is not zero
- * and it has changed since the last watchdog
- * we can assume that channel
- * is still working correctly
- * and the problem is in completion writeback.
- * update completion writeback
- * with actual CHANSTS value
- * else
- * try resetting the channel
- */
-
- completion_hw.low = readl(ioat_chan->reg_base +
- IOAT_CHANSTS_OFFSET_LOW(ioat_chan->device->version));
- completion_hw.high = readl(ioat_chan->reg_base +
- IOAT_CHANSTS_OFFSET_HIGH(ioat_chan->device->version));
-#if (BITS_PER_LONG == 64)
- compl_desc_addr_hw =
- completion_hw.full
- & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
-#else
- compl_desc_addr_hw =
- completion_hw.low & IOAT_LOW_COMPLETION_MASK;
-#endif
-
- if ((compl_desc_addr_hw != 0)
- && (compl_desc_addr_hw != ioat_chan->watchdog_completion)
- && (compl_desc_addr_hw != ioat_chan->last_compl_desc_addr_hw)) {
- ioat_chan->last_compl_desc_addr_hw = compl_desc_addr_hw;
- ioat_chan->completion_virt->low = completion_hw.low;
- ioat_chan->completion_virt->high = completion_hw.high;
- } else {
- ioat_dma_reset_channel(ioat_chan);
- ioat_chan->watchdog_completion = 0;
- ioat_chan->last_compl_desc_addr_hw = 0;
- }
-
- /*
- * for version 2.0 if there are descriptors yet to be processed
- * and the last completed hasn't changed since the last watchdog
- * if they haven't hit the pending level
- * issue the pending to push them through
- * else
- * try resetting the channel
- */
- } else if (ioat_chan->device->version == IOAT_VER_2_0
- && ioat_chan->used_desc.prev
- && ioat_chan->last_completion
- && ioat_chan->last_completion == ioat_chan->watchdog_completion) {
-
- if (ioat_chan->pending < ioat_pending_level)
- ioat2_dma_memcpy_issue_pending(&ioat_chan->common);
- else {
- ioat_dma_reset_channel(ioat_chan);
- ioat_chan->watchdog_completion = 0;
- }
- } else {
- ioat_chan->last_compl_desc_addr_hw = 0;
- ioat_chan->watchdog_completion
- = ioat_chan->last_completion;
- }
-
- ioat_chan->watchdog_last_tcp_cookie =
- ioat_chan->watchdog_tcp_cookie;
- }
-
- schedule_delayed_work(&device->work, WATCHDOG_DELAY);
-}
-
-static dma_cookie_t ioat1_tx_submit(struct dma_async_tx_descriptor *tx)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(tx->chan);
- struct ioat_desc_sw *first = tx_to_ioat_desc(tx);
- struct ioat_desc_sw *prev, *new;
- struct ioat_dma_descriptor *hw;
- dma_cookie_t cookie;
- LIST_HEAD(new_chain);
- u32 copy;
- size_t len;
- dma_addr_t src, dst;
- unsigned long orig_flags;
- unsigned int desc_count = 0;
-
- /* src and dest and len are stored in the initial descriptor */
- len = first->len;
- src = first->src;
- dst = first->dst;
- orig_flags = first->async_tx.flags;
- new = first;
-
- spin_lock_bh(&ioat_chan->desc_lock);
- prev = to_ioat_desc(ioat_chan->used_desc.prev);
- prefetch(prev->hw);
- do {
- copy = min_t(size_t, len, ioat_chan->xfercap);
-
- async_tx_ack(&new->async_tx);
-
- hw = new->hw;
- hw->size = copy;
- hw->ctl = 0;
- hw->src_addr = src;
- hw->dst_addr = dst;
- hw->next = 0;
-
- /* chain together the physical address list for the HW */
- wmb();
- prev->hw->next = (u64) new->async_tx.phys;
-
- len -= copy;
- dst += copy;
- src += copy;
-
- list_add_tail(&new->node, &new_chain);
- desc_count++;
- prev = new;
- } while (len && (new = ioat1_dma_get_next_descriptor(ioat_chan)));
-
- if (!new) {
- dev_err(&ioat_chan->device->pdev->dev,
- "tx submit failed\n");
- spin_unlock_bh(&ioat_chan->desc_lock);
- return -ENOMEM;
- }
-
- hw->ctl = IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
- if (first->async_tx.callback) {
- hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
- if (first != new) {
- /* move callback into to last desc */
- new->async_tx.callback = first->async_tx.callback;
- new->async_tx.callback_param
- = first->async_tx.callback_param;
- first->async_tx.callback = NULL;
- first->async_tx.callback_param = NULL;
- }
- }
-
- new->tx_cnt = desc_count;
- new->async_tx.flags = orig_flags; /* client is in control of this ack */
-
- /* store the original values for use in later cleanup */
- if (new != first) {
- new->src = first->src;
- new->dst = first->dst;
- new->len = first->len;
- }
-
- /* cookie incr and addition to used_list must be atomic */
- cookie = ioat_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- ioat_chan->common.cookie = new->async_tx.cookie = cookie;
-
- /* write address into NextDescriptor field of last desc in chain */
- to_ioat_desc(ioat_chan->used_desc.prev)->hw->next =
- first->async_tx.phys;
- list_splice_tail(&new_chain, &ioat_chan->used_desc);
-
- ioat_chan->dmacount += desc_count;
- ioat_chan->pending += desc_count;
- if (ioat_chan->pending >= ioat_pending_level)
- __ioat1_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- return cookie;
-}
-
-static dma_cookie_t ioat2_tx_submit(struct dma_async_tx_descriptor *tx)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(tx->chan);
- struct ioat_desc_sw *first = tx_to_ioat_desc(tx);
- struct ioat_desc_sw *new;
- struct ioat_dma_descriptor *hw;
- dma_cookie_t cookie;
- u32 copy;
- size_t len;
- dma_addr_t src, dst;
- unsigned long orig_flags;
- unsigned int desc_count = 0;
-
- /* src and dest and len are stored in the initial descriptor */
- len = first->len;
- src = first->src;
- dst = first->dst;
- orig_flags = first->async_tx.flags;
- new = first;
-
- /*
- * ioat_chan->desc_lock is still in force in version 2 path
- * it gets unlocked at end of this function
- */
- do {
- copy = min_t(size_t, len, ioat_chan->xfercap);
-
- async_tx_ack(&new->async_tx);
-
- hw = new->hw;
- hw->size = copy;
- hw->ctl = 0;
- hw->src_addr = src;
- hw->dst_addr = dst;
-
- len -= copy;
- dst += copy;
- src += copy;
- desc_count++;
- } while (len && (new = ioat2_dma_get_next_descriptor(ioat_chan)));
-
- if (!new) {
- dev_err(&ioat_chan->device->pdev->dev,
- "tx submit failed\n");
- spin_unlock_bh(&ioat_chan->desc_lock);
- return -ENOMEM;
- }
-
- hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
- if (first->async_tx.callback) {
- hw->ctl |= IOAT_DMA_DESCRIPTOR_CTL_INT_GN;
- if (first != new) {
- /* move callback into to last desc */
- new->async_tx.callback = first->async_tx.callback;
- new->async_tx.callback_param
- = first->async_tx.callback_param;
- first->async_tx.callback = NULL;
- first->async_tx.callback_param = NULL;
- }
- }
-
- new->tx_cnt = desc_count;
- new->async_tx.flags = orig_flags; /* client is in control of this ack */
-
- /* store the original values for use in later cleanup */
- if (new != first) {
- new->src = first->src;
- new->dst = first->dst;
- new->len = first->len;
- }
-
- /* cookie incr and addition to used_list must be atomic */
- cookie = ioat_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- ioat_chan->common.cookie = new->async_tx.cookie = cookie;
-
- ioat_chan->dmacount += desc_count;
- ioat_chan->pending += desc_count;
- if (ioat_chan->pending >= ioat_pending_level)
- __ioat2_dma_memcpy_issue_pending(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- return cookie;
-}
-
-/**
- * ioat_dma_alloc_descriptor - allocate and return a sw and hw descriptor pair
- * @ioat_chan: the channel supplying the memory pool for the descriptors
- * @flags: allocation flags
- */
-static struct ioat_desc_sw *ioat_dma_alloc_descriptor(
- struct ioat_dma_chan *ioat_chan,
- gfp_t flags)
-{
- struct ioat_dma_descriptor *desc;
- struct ioat_desc_sw *desc_sw;
- struct ioatdma_device *ioatdma_device;
- dma_addr_t phys;
-
- ioatdma_device = to_ioatdma_device(ioat_chan->common.device);
- desc = pci_pool_alloc(ioatdma_device->dma_pool, flags, &phys);
- if (unlikely(!desc))
- return NULL;
-
- desc_sw = kzalloc(sizeof(*desc_sw), flags);
- if (unlikely(!desc_sw)) {
- pci_pool_free(ioatdma_device->dma_pool, desc, phys);
- return NULL;
- }
-
- memset(desc, 0, sizeof(*desc));
- dma_async_tx_descriptor_init(&desc_sw->async_tx, &ioat_chan->common);
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- desc_sw->async_tx.tx_submit = ioat1_tx_submit;
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- desc_sw->async_tx.tx_submit = ioat2_tx_submit;
- break;
- }
-
- desc_sw->hw = desc;
- desc_sw->async_tx.phys = phys;
-
- return desc_sw;
-}
-
-static int ioat_initial_desc_count = 256;
-module_param(ioat_initial_desc_count, int, 0644);
-MODULE_PARM_DESC(ioat_initial_desc_count,
- "initial descriptors per channel (default: 256)");
-
-/**
- * ioat2_dma_massage_chan_desc - link the descriptors into a circle
- * @ioat_chan: the channel to be massaged
- */
-static void ioat2_dma_massage_chan_desc(struct ioat_dma_chan *ioat_chan)
-{
- struct ioat_desc_sw *desc, *_desc;
-
- /* setup used_desc */
- ioat_chan->used_desc.next = ioat_chan->free_desc.next;
- ioat_chan->used_desc.prev = NULL;
-
- /* pull free_desc out of the circle so that every node is a hw
- * descriptor, but leave it pointing to the list
- */
- ioat_chan->free_desc.prev->next = ioat_chan->free_desc.next;
- ioat_chan->free_desc.next->prev = ioat_chan->free_desc.prev;
-
- /* circle link the hw descriptors */
- desc = to_ioat_desc(ioat_chan->free_desc.next);
- desc->hw->next = to_ioat_desc(desc->node.next)->async_tx.phys;
- list_for_each_entry_safe(desc, _desc, ioat_chan->free_desc.next, node) {
- desc->hw->next = to_ioat_desc(desc->node.next)->async_tx.phys;
- }
-}
-
-/**
- * ioat_dma_alloc_chan_resources - returns the number of allocated descriptors
- * @chan: the channel to be filled out
- */
-static int ioat_dma_alloc_chan_resources(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioat_desc_sw *desc;
- u16 chanctrl;
- u32 chanerr;
- int i;
- LIST_HEAD(tmp_list);
-
- /* have we already been set up? */
- if (!list_empty(&ioat_chan->free_desc))
- return ioat_chan->desccount;
-
- /* Setup register to interrupt and write completion status on error */
- chanctrl = IOAT_CHANCTRL_ERR_INT_EN |
- IOAT_CHANCTRL_ANY_ERR_ABORT_EN |
- IOAT_CHANCTRL_ERR_COMPLETION_EN;
- writew(chanctrl, ioat_chan->reg_base + IOAT_CHANCTRL_OFFSET);
-
- chanerr = readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
- if (chanerr) {
- dev_err(&ioat_chan->device->pdev->dev,
- "CHANERR = %x, clearing\n", chanerr);
- writel(chanerr, ioat_chan->reg_base + IOAT_CHANERR_OFFSET);
- }
-
- /* Allocate descriptors */
- for (i = 0; i < ioat_initial_desc_count; i++) {
- desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_KERNEL);
- if (!desc) {
- dev_err(&ioat_chan->device->pdev->dev,
- "Only %d initial descriptors\n", i);
- break;
- }
- list_add_tail(&desc->node, &tmp_list);
- }
- spin_lock_bh(&ioat_chan->desc_lock);
- ioat_chan->desccount = i;
- list_splice(&tmp_list, &ioat_chan->free_desc);
- if (ioat_chan->device->version != IOAT_VER_1_2)
- ioat2_dma_massage_chan_desc(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- /* allocate a completion writeback area */
- /* doing 2 32bit writes to mmio since 1 64b write doesn't work */
- ioat_chan->completion_virt =
- pci_pool_alloc(ioat_chan->device->completion_pool,
- GFP_KERNEL,
- &ioat_chan->completion_addr);
- memset(ioat_chan->completion_virt, 0,
- sizeof(*ioat_chan->completion_virt));
- writel(((u64) ioat_chan->completion_addr) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT_CHANCMP_OFFSET_LOW);
- writel(((u64) ioat_chan->completion_addr) >> 32,
- ioat_chan->reg_base + IOAT_CHANCMP_OFFSET_HIGH);
-
- tasklet_enable(&ioat_chan->cleanup_task);
- ioat_dma_start_null_desc(ioat_chan); /* give chain to dma device */
- return ioat_chan->desccount;
-}
-
-/**
- * ioat_dma_free_chan_resources - release all the descriptors
- * @chan: the channel to be cleaned
- */
-static void ioat_dma_free_chan_resources(struct dma_chan *chan)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioatdma_device *ioatdma_device = to_ioatdma_device(chan->device);
- struct ioat_desc_sw *desc, *_desc;
- int in_use_descs = 0;
-
- /* Before freeing channel resources first check
- * if they have been previously allocated for this channel.
- */
- if (ioat_chan->desccount == 0)
- return;
-
- tasklet_disable(&ioat_chan->cleanup_task);
- ioat_dma_memcpy_cleanup(ioat_chan);
-
- /* Delay 100ms after reset to allow internal DMA logic to quiesce
- * before removing DMA descriptor resources.
- */
- writeb(IOAT_CHANCMD_RESET,
- ioat_chan->reg_base
- + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
- mdelay(100);
-
- spin_lock_bh(&ioat_chan->desc_lock);
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- list_for_each_entry_safe(desc, _desc,
- &ioat_chan->used_desc, node) {
- in_use_descs++;
- list_del(&desc->node);
- pci_pool_free(ioatdma_device->dma_pool, desc->hw,
- desc->async_tx.phys);
- kfree(desc);
- }
- list_for_each_entry_safe(desc, _desc,
- &ioat_chan->free_desc, node) {
- list_del(&desc->node);
- pci_pool_free(ioatdma_device->dma_pool, desc->hw,
- desc->async_tx.phys);
- kfree(desc);
- }
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- list_for_each_entry_safe(desc, _desc,
- ioat_chan->free_desc.next, node) {
- list_del(&desc->node);
- pci_pool_free(ioatdma_device->dma_pool, desc->hw,
- desc->async_tx.phys);
- kfree(desc);
- }
- desc = to_ioat_desc(ioat_chan->free_desc.next);
- pci_pool_free(ioatdma_device->dma_pool, desc->hw,
- desc->async_tx.phys);
- kfree(desc);
- INIT_LIST_HEAD(&ioat_chan->free_desc);
- INIT_LIST_HEAD(&ioat_chan->used_desc);
- break;
- }
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- pci_pool_free(ioatdma_device->completion_pool,
- ioat_chan->completion_virt,
- ioat_chan->completion_addr);
-
- /* one is ok since we left it on there on purpose */
- if (in_use_descs > 1)
- dev_err(&ioat_chan->device->pdev->dev,
- "Freeing %d in use descriptors!\n",
- in_use_descs - 1);
-
- ioat_chan->last_completion = ioat_chan->completion_addr = 0;
- ioat_chan->pending = 0;
- ioat_chan->dmacount = 0;
- ioat_chan->desccount = 0;
- ioat_chan->watchdog_completion = 0;
- ioat_chan->last_compl_desc_addr_hw = 0;
- ioat_chan->watchdog_tcp_cookie =
- ioat_chan->watchdog_last_tcp_cookie = 0;
-}
-
-/**
- * ioat_dma_get_next_descriptor - return the next available descriptor
- * @ioat_chan: IOAT DMA channel handle
- *
- * Gets the next descriptor from the chain, and must be called with the
- * channel's desc_lock held. Allocates more descriptors if the channel
- * has run out.
- */
-static struct ioat_desc_sw *
-ioat1_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
-{
- struct ioat_desc_sw *new;
-
- if (!list_empty(&ioat_chan->free_desc)) {
- new = to_ioat_desc(ioat_chan->free_desc.next);
- list_del(&new->node);
- } else {
- /* try to get another desc */
- new = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC);
- if (!new) {
- dev_err(&ioat_chan->device->pdev->dev,
- "alloc failed\n");
- return NULL;
- }
- }
-
- prefetch(new->hw);
- return new;
-}
-
-static struct ioat_desc_sw *
-ioat2_dma_get_next_descriptor(struct ioat_dma_chan *ioat_chan)
-{
- struct ioat_desc_sw *new;
-
- /*
- * used.prev points to where to start processing
- * used.next points to next free descriptor
- * if used.prev == NULL, there are none waiting to be processed
- * if used.next == used.prev.prev, there is only one free descriptor,
- * and we need to use it to as a noop descriptor before
- * linking in a new set of descriptors, since the device
- * has probably already read the pointer to it
- */
- if (ioat_chan->used_desc.prev &&
- ioat_chan->used_desc.next == ioat_chan->used_desc.prev->prev) {
-
- struct ioat_desc_sw *desc;
- struct ioat_desc_sw *noop_desc;
- int i;
-
- /* set up the noop descriptor */
- noop_desc = to_ioat_desc(ioat_chan->used_desc.next);
- /* set size to non-zero value (channel returns error when size is 0) */
- noop_desc->hw->size = NULL_DESC_BUFFER_SIZE;
- noop_desc->hw->ctl = IOAT_DMA_DESCRIPTOR_NUL;
- noop_desc->hw->src_addr = 0;
- noop_desc->hw->dst_addr = 0;
-
- ioat_chan->used_desc.next = ioat_chan->used_desc.next->next;
- ioat_chan->pending++;
- ioat_chan->dmacount++;
-
- /* try to get a few more descriptors */
- for (i = 16; i; i--) {
- desc = ioat_dma_alloc_descriptor(ioat_chan, GFP_ATOMIC);
- if (!desc) {
- dev_err(&ioat_chan->device->pdev->dev,
- "alloc failed\n");
- break;
- }
- list_add_tail(&desc->node, ioat_chan->used_desc.next);
-
- desc->hw->next
- = to_ioat_desc(desc->node.next)->async_tx.phys;
- to_ioat_desc(desc->node.prev)->hw->next
- = desc->async_tx.phys;
- ioat_chan->desccount++;
- }
-
- ioat_chan->used_desc.next = noop_desc->node.next;
- }
- new = to_ioat_desc(ioat_chan->used_desc.next);
- prefetch(new);
- ioat_chan->used_desc.next = new->node.next;
-
- if (ioat_chan->used_desc.prev == NULL)
- ioat_chan->used_desc.prev = &new->node;
-
- prefetch(new->hw);
- return new;
-}
-
-static struct ioat_desc_sw *ioat_dma_get_next_descriptor(
- struct ioat_dma_chan *ioat_chan)
-{
- if (!ioat_chan)
- return NULL;
-
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- return ioat1_dma_get_next_descriptor(ioat_chan);
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- return ioat2_dma_get_next_descriptor(ioat_chan);
- }
- return NULL;
-}
-
-static struct dma_async_tx_descriptor *ioat1_dma_prep_memcpy(
- struct dma_chan *chan,
- dma_addr_t dma_dest,
- dma_addr_t dma_src,
- size_t len,
- unsigned long flags)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioat_desc_sw *new;
-
- spin_lock_bh(&ioat_chan->desc_lock);
- new = ioat_dma_get_next_descriptor(ioat_chan);
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- if (new) {
- new->len = len;
- new->dst = dma_dest;
- new->src = dma_src;
- new->async_tx.flags = flags;
- return &new->async_tx;
- } else {
- dev_err(&ioat_chan->device->pdev->dev,
- "chan%d - get_next_desc failed: %d descs waiting, %d total desc\n",
- chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
- return NULL;
- }
-}
-
-static struct dma_async_tx_descriptor *ioat2_dma_prep_memcpy(
- struct dma_chan *chan,
- dma_addr_t dma_dest,
- dma_addr_t dma_src,
- size_t len,
- unsigned long flags)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- struct ioat_desc_sw *new;
-
- spin_lock_bh(&ioat_chan->desc_lock);
- new = ioat2_dma_get_next_descriptor(ioat_chan);
-
- /*
- * leave ioat_chan->desc_lock set in ioat 2 path
- * it will get unlocked at end of tx_submit
- */
-
- if (new) {
- new->len = len;
- new->dst = dma_dest;
- new->src = dma_src;
- new->async_tx.flags = flags;
- return &new->async_tx;
- } else {
- spin_unlock_bh(&ioat_chan->desc_lock);
- dev_err(&ioat_chan->device->pdev->dev,
- "chan%d - get_next_desc failed: %d descs waiting, %d total desc\n",
- chan_num(ioat_chan), ioat_chan->dmacount, ioat_chan->desccount);
- return NULL;
- }
-}
-
-static void ioat_dma_cleanup_tasklet(unsigned long data)
-{
- struct ioat_dma_chan *chan = (void *)data;
- ioat_dma_memcpy_cleanup(chan);
- writew(IOAT_CHANCTRL_INT_DISABLE,
- chan->reg_base + IOAT_CHANCTRL_OFFSET);
-}
-
-static void
-ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc)
-{
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
- pci_unmap_single(ioat_chan->device->pdev,
- pci_unmap_addr(desc, dst),
- pci_unmap_len(desc, len),
- PCI_DMA_FROMDEVICE);
- else
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, dst),
- pci_unmap_len(desc, len),
- PCI_DMA_FROMDEVICE);
- }
-
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
- pci_unmap_single(ioat_chan->device->pdev,
- pci_unmap_addr(desc, src),
- pci_unmap_len(desc, len),
- PCI_DMA_TODEVICE);
- else
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, src),
- pci_unmap_len(desc, len),
- PCI_DMA_TODEVICE);
- }
-}
-
-/**
- * ioat_dma_memcpy_cleanup - cleanup up finished descriptors
- * @chan: ioat channel to be cleaned up
- */
-static void ioat_dma_memcpy_cleanup(struct ioat_dma_chan *ioat_chan)
-{
- unsigned long phys_complete;
- struct ioat_desc_sw *desc, *_desc;
- dma_cookie_t cookie = 0;
- unsigned long desc_phys;
- struct ioat_desc_sw *latest_desc;
-
- prefetch(ioat_chan->completion_virt);
-
- if (!spin_trylock_bh(&ioat_chan->cleanup_lock))
- return;
-
- /* The completion writeback can happen at any time,
- so reads by the driver need to be atomic operations
- The descriptor physical addresses are limited to 32-bits
- when the CPU can only do a 32-bit mov */
-
-#if (BITS_PER_LONG == 64)
- phys_complete =
- ioat_chan->completion_virt->full
- & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
-#else
- phys_complete =
- ioat_chan->completion_virt->low & IOAT_LOW_COMPLETION_MASK;
-#endif
-
- if ((ioat_chan->completion_virt->full
- & IOAT_CHANSTS_DMA_TRANSFER_STATUS) ==
- IOAT_CHANSTS_DMA_TRANSFER_STATUS_HALTED) {
- dev_err(&ioat_chan->device->pdev->dev,
- "Channel halted, chanerr = %x\n",
- readl(ioat_chan->reg_base + IOAT_CHANERR_OFFSET));
-
- /* TODO do something to salvage the situation */
- }
-
- if (phys_complete == ioat_chan->last_completion) {
- spin_unlock_bh(&ioat_chan->cleanup_lock);
- /*
- * perhaps we're stuck so hard that the watchdog can't go off?
- * try to catch it after 2 seconds
- */
- if (ioat_chan->device->version != IOAT_VER_3_0) {
- if (time_after(jiffies,
- ioat_chan->last_completion_time + HZ*WATCHDOG_DELAY)) {
- ioat_dma_chan_watchdog(&(ioat_chan->device->work.work));
- ioat_chan->last_completion_time = jiffies;
- }
- }
- return;
- }
- ioat_chan->last_completion_time = jiffies;
-
- cookie = 0;
- if (!spin_trylock_bh(&ioat_chan->desc_lock)) {
- spin_unlock_bh(&ioat_chan->cleanup_lock);
- return;
- }
-
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- list_for_each_entry_safe(desc, _desc,
- &ioat_chan->used_desc, node) {
-
- /*
- * Incoming DMA requests may use multiple descriptors,
- * due to exceeding xfercap, perhaps. If so, only the
- * last one will have a cookie, and require unmapping.
- */
- if (desc->async_tx.cookie) {
- cookie = desc->async_tx.cookie;
- ioat_dma_unmap(ioat_chan, desc);
- if (desc->async_tx.callback) {
- desc->async_tx.callback(desc->async_tx.callback_param);
- desc->async_tx.callback = NULL;
- }
- }
-
- if (desc->async_tx.phys != phys_complete) {
- /*
- * a completed entry, but not the last, so clean
- * up if the client is done with the descriptor
- */
- if (async_tx_test_ack(&desc->async_tx)) {
- list_move_tail(&desc->node,
- &ioat_chan->free_desc);
- } else
- desc->async_tx.cookie = 0;
- } else {
- /*
- * last used desc. Do not remove, so we can
- * append from it, but don't look at it next
- * time, either
- */
- desc->async_tx.cookie = 0;
-
- /* TODO check status bits? */
- break;
- }
- }
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- /* has some other thread has already cleaned up? */
- if (ioat_chan->used_desc.prev == NULL)
- break;
-
- /* work backwards to find latest finished desc */
- desc = to_ioat_desc(ioat_chan->used_desc.next);
- latest_desc = NULL;
- do {
- desc = to_ioat_desc(desc->node.prev);
- desc_phys = (unsigned long)desc->async_tx.phys
- & IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR;
- if (desc_phys == phys_complete) {
- latest_desc = desc;
- break;
- }
- } while (&desc->node != ioat_chan->used_desc.prev);
-
- if (latest_desc != NULL) {
-
- /* work forwards to clear finished descriptors */
- for (desc = to_ioat_desc(ioat_chan->used_desc.prev);
- &desc->node != latest_desc->node.next &&
- &desc->node != ioat_chan->used_desc.next;
- desc = to_ioat_desc(desc->node.next)) {
- if (desc->async_tx.cookie) {
- cookie = desc->async_tx.cookie;
- desc->async_tx.cookie = 0;
- ioat_dma_unmap(ioat_chan, desc);
- if (desc->async_tx.callback) {
- desc->async_tx.callback(desc->async_tx.callback_param);
- desc->async_tx.callback = NULL;
- }
- }
- }
-
- /* move used.prev up beyond those that are finished */
- if (&desc->node == ioat_chan->used_desc.next)
- ioat_chan->used_desc.prev = NULL;
- else
- ioat_chan->used_desc.prev = &desc->node;
- }
- break;
- }
-
- spin_unlock_bh(&ioat_chan->desc_lock);
-
- ioat_chan->last_completion = phys_complete;
- if (cookie != 0)
- ioat_chan->completed_cookie = cookie;
-
- spin_unlock_bh(&ioat_chan->cleanup_lock);
-}
-
-/**
- * ioat_dma_is_complete - poll the status of a IOAT DMA transaction
- * @chan: IOAT DMA channel handle
- * @cookie: DMA transaction identifier
- * @done: if not %NULL, updated with last completed transaction
- * @used: if not %NULL, updated with last used transaction
- */
-static enum dma_status ioat_dma_is_complete(struct dma_chan *chan,
- dma_cookie_t cookie,
- dma_cookie_t *done,
- dma_cookie_t *used)
-{
- struct ioat_dma_chan *ioat_chan = to_ioat_chan(chan);
- dma_cookie_t last_used;
- dma_cookie_t last_complete;
- enum dma_status ret;
-
- last_used = chan->cookie;
- last_complete = ioat_chan->completed_cookie;
- ioat_chan->watchdog_tcp_cookie = cookie;
-
- if (done)
- *done = last_complete;
- if (used)
- *used = last_used;
-
- ret = dma_async_is_complete(cookie, last_complete, last_used);
- if (ret == DMA_SUCCESS)
- return ret;
-
- ioat_dma_memcpy_cleanup(ioat_chan);
-
- last_used = chan->cookie;
- last_complete = ioat_chan->completed_cookie;
-
- if (done)
- *done = last_complete;
- if (used)
- *used = last_used;
-
- return dma_async_is_complete(cookie, last_complete, last_used);
-}
-
-static void ioat_dma_start_null_desc(struct ioat_dma_chan *ioat_chan)
-{
- struct ioat_desc_sw *desc;
-
- spin_lock_bh(&ioat_chan->desc_lock);
-
- desc = ioat_dma_get_next_descriptor(ioat_chan);
-
- if (!desc) {
- dev_err(&ioat_chan->device->pdev->dev,
- "Unable to start null desc - get next desc failed\n");
- spin_unlock_bh(&ioat_chan->desc_lock);
- return;
- }
-
- desc->hw->ctl = IOAT_DMA_DESCRIPTOR_NUL
- | IOAT_DMA_DESCRIPTOR_CTL_INT_GN
- | IOAT_DMA_DESCRIPTOR_CTL_CP_STS;
- /* set size to non-zero value (channel returns error when size is 0) */
- desc->hw->size = NULL_DESC_BUFFER_SIZE;
- desc->hw->src_addr = 0;
- desc->hw->dst_addr = 0;
- async_tx_ack(&desc->async_tx);
- switch (ioat_chan->device->version) {
- case IOAT_VER_1_2:
- desc->hw->next = 0;
- list_add_tail(&desc->node, &ioat_chan->used_desc);
-
- writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_LOW);
- writel(((u64) desc->async_tx.phys) >> 32,
- ioat_chan->reg_base + IOAT1_CHAINADDR_OFFSET_HIGH);
-
- writeb(IOAT_CHANCMD_START, ioat_chan->reg_base
- + IOAT_CHANCMD_OFFSET(ioat_chan->device->version));
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- writel(((u64) desc->async_tx.phys) & 0x00000000FFFFFFFF,
- ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_LOW);
- writel(((u64) desc->async_tx.phys) >> 32,
- ioat_chan->reg_base + IOAT2_CHAINADDR_OFFSET_HIGH);
-
- ioat_chan->dmacount++;
- __ioat2_dma_memcpy_issue_pending(ioat_chan);
- break;
- }
- spin_unlock_bh(&ioat_chan->desc_lock);
-}
-
-/*
- * Perform a IOAT transaction to verify the HW works.
- */
-#define IOAT_TEST_SIZE 2000
-
-static void ioat_dma_test_callback(void *dma_async_param)
-{
- struct completion *cmp = dma_async_param;
-
- complete(cmp);
-}
-
-/**
- * ioat_dma_self_test - Perform a IOAT transaction to verify the HW works.
- * @device: device to be tested
- */
-static int ioat_dma_self_test(struct ioatdma_device *device)
-{
- int i;
- u8 *src;
- u8 *dest;
- struct dma_chan *dma_chan;
- struct dma_async_tx_descriptor *tx;
- dma_addr_t dma_dest, dma_src;
- dma_cookie_t cookie;
- int err = 0;
- struct completion cmp;
- unsigned long tmo;
- unsigned long flags;
-
- src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
- if (!src)
- return -ENOMEM;
- dest = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
- if (!dest) {
- kfree(src);
- return -ENOMEM;
- }
-
- /* Fill in src buffer */
- for (i = 0; i < IOAT_TEST_SIZE; i++)
- src[i] = (u8)i;
-
- /* Start copy, using first DMA channel */
- dma_chan = container_of(device->common.channels.next,
- struct dma_chan,
- device_node);
- if (device->common.device_alloc_chan_resources(dma_chan) < 1) {
- dev_err(&device->pdev->dev,
- "selftest cannot allocate chan resource\n");
- err = -ENODEV;
- goto out;
- }
-
- dma_src = dma_map_single(dma_chan->device->dev, src, IOAT_TEST_SIZE,
- DMA_TO_DEVICE);
- dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE,
- DMA_FROM_DEVICE);
- flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE;
- tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
- IOAT_TEST_SIZE, flags);
- if (!tx) {
- dev_err(&device->pdev->dev,
- "Self-test prep failed, disabling\n");
- err = -ENODEV;
- goto free_resources;
- }
-
- async_tx_ack(tx);
- init_completion(&cmp);
- tx->callback = ioat_dma_test_callback;
- tx->callback_param = &cmp;
- cookie = tx->tx_submit(tx);
- if (cookie < 0) {
- dev_err(&device->pdev->dev,
- "Self-test setup failed, disabling\n");
- err = -ENODEV;
- goto free_resources;
- }
- device->common.device_issue_pending(dma_chan);
-
- tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
-
- if (tmo == 0 ||
- device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
- != DMA_SUCCESS) {
- dev_err(&device->pdev->dev,
- "Self-test copy timed out, disabling\n");
- err = -ENODEV;
- goto free_resources;
- }
- if (memcmp(src, dest, IOAT_TEST_SIZE)) {
- dev_err(&device->pdev->dev,
- "Self-test copy failed compare, disabling\n");
- err = -ENODEV;
- goto free_resources;
- }
-
-free_resources:
- device->common.device_free_chan_resources(dma_chan);
-out:
- kfree(src);
- kfree(dest);
- return err;
-}
-
-static char ioat_interrupt_style[32] = "msix";
-module_param_string(ioat_interrupt_style, ioat_interrupt_style,
- sizeof(ioat_interrupt_style), 0644);
-MODULE_PARM_DESC(ioat_interrupt_style,
- "set ioat interrupt style: msix (default), "
- "msix-single-vector, msi, intx)");
-
-/**
- * ioat_dma_setup_interrupts - setup interrupt handler
- * @device: ioat device
- */
-static int ioat_dma_setup_interrupts(struct ioatdma_device *device)
-{
- struct ioat_dma_chan *ioat_chan;
- int err, i, j, msixcnt;
- u8 intrctrl = 0;
-
- if (!strcmp(ioat_interrupt_style, "msix"))
- goto msix;
- if (!strcmp(ioat_interrupt_style, "msix-single-vector"))
- goto msix_single_vector;
- if (!strcmp(ioat_interrupt_style, "msi"))
- goto msi;
- if (!strcmp(ioat_interrupt_style, "intx"))
- goto intx;
- dev_err(&device->pdev->dev, "invalid ioat_interrupt_style %s\n",
- ioat_interrupt_style);
- goto err_no_irq;
-
-msix:
- /* The number of MSI-X vectors should equal the number of channels */
- msixcnt = device->common.chancnt;
- for (i = 0; i < msixcnt; i++)
- device->msix_entries[i].entry = i;
-
- err = pci_enable_msix(device->pdev, device->msix_entries, msixcnt);
- if (err < 0)
- goto msi;
- if (err > 0)
- goto msix_single_vector;
-
- for (i = 0; i < msixcnt; i++) {
- ioat_chan = ioat_lookup_chan_by_index(device, i);
- err = request_irq(device->msix_entries[i].vector,
- ioat_dma_do_interrupt_msix,
- 0, "ioat-msix", ioat_chan);
- if (err) {
- for (j = 0; j < i; j++) {
- ioat_chan =
- ioat_lookup_chan_by_index(device, j);
- free_irq(device->msix_entries[j].vector,
- ioat_chan);
- }
- goto msix_single_vector;
- }
- }
- intrctrl |= IOAT_INTRCTRL_MSIX_VECTOR_CONTROL;
- device->irq_mode = msix_multi_vector;
- goto done;
-
-msix_single_vector:
- device->msix_entries[0].entry = 0;
- err = pci_enable_msix(device->pdev, device->msix_entries, 1);
- if (err)
- goto msi;
-
- err = request_irq(device->msix_entries[0].vector, ioat_dma_do_interrupt,
- 0, "ioat-msix", device);
- if (err) {
- pci_disable_msix(device->pdev);
- goto msi;
- }
- device->irq_mode = msix_single_vector;
- goto done;
-
-msi:
- err = pci_enable_msi(device->pdev);
- if (err)
- goto intx;
-
- err = request_irq(device->pdev->irq, ioat_dma_do_interrupt,
- 0, "ioat-msi", device);
- if (err) {
- pci_disable_msi(device->pdev);
- goto intx;
- }
- /*
- * CB 1.2 devices need a bit set in configuration space to enable MSI
- */
- if (device->version == IOAT_VER_1_2) {
- u32 dmactrl;
- pci_read_config_dword(device->pdev,
- IOAT_PCI_DMACTRL_OFFSET, &dmactrl);
- dmactrl |= IOAT_PCI_DMACTRL_MSI_EN;
- pci_write_config_dword(device->pdev,
- IOAT_PCI_DMACTRL_OFFSET, dmactrl);
- }
- device->irq_mode = msi;
- goto done;
-
-intx:
- err = request_irq(device->pdev->irq, ioat_dma_do_interrupt,
- IRQF_SHARED, "ioat-intx", device);
- if (err)
- goto err_no_irq;
- device->irq_mode = intx;
-
-done:
- intrctrl |= IOAT_INTRCTRL_MASTER_INT_EN;
- writeb(intrctrl, device->reg_base + IOAT_INTRCTRL_OFFSET);
- return 0;
-
-err_no_irq:
- /* Disable all interrupt generation */
- writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
- dev_err(&device->pdev->dev, "no usable interrupts\n");
- device->irq_mode = none;
- return -1;
-}
-
-/**
- * ioat_dma_remove_interrupts - remove whatever interrupts were set
- * @device: ioat device
- */
-static void ioat_dma_remove_interrupts(struct ioatdma_device *device)
-{
- struct ioat_dma_chan *ioat_chan;
- int i;
-
- /* Disable all interrupt generation */
- writeb(0, device->reg_base + IOAT_INTRCTRL_OFFSET);
-
- switch (device->irq_mode) {
- case msix_multi_vector:
- for (i = 0; i < device->common.chancnt; i++) {
- ioat_chan = ioat_lookup_chan_by_index(device, i);
- free_irq(device->msix_entries[i].vector, ioat_chan);
- }
- pci_disable_msix(device->pdev);
- break;
- case msix_single_vector:
- free_irq(device->msix_entries[0].vector, device);
- pci_disable_msix(device->pdev);
- break;
- case msi:
- free_irq(device->pdev->irq, device);
- pci_disable_msi(device->pdev);
- break;
- case intx:
- free_irq(device->pdev->irq, device);
- break;
- case none:
- dev_warn(&device->pdev->dev,
- "call to %s without interrupts setup\n", __func__);
- }
- device->irq_mode = none;
-}
-
-struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
- void __iomem *iobase)
-{
- int err;
- struct ioatdma_device *device;
-
- device = kzalloc(sizeof(*device), GFP_KERNEL);
- if (!device) {
- err = -ENOMEM;
- goto err_kzalloc;
- }
- device->pdev = pdev;
- device->reg_base = iobase;
- device->version = readb(device->reg_base + IOAT_VER_OFFSET);
-
- /* DMA coherent memory pool for DMA descriptor allocations */
- device->dma_pool = pci_pool_create("dma_desc_pool", pdev,
- sizeof(struct ioat_dma_descriptor),
- 64, 0);
- if (!device->dma_pool) {
- err = -ENOMEM;
- goto err_dma_pool;
- }
-
- device->completion_pool = pci_pool_create("completion_pool", pdev,
- sizeof(u64), SMP_CACHE_BYTES,
- SMP_CACHE_BYTES);
- if (!device->completion_pool) {
- err = -ENOMEM;
- goto err_completion_pool;
- }
-
- INIT_LIST_HEAD(&device->common.channels);
- ioat_dma_enumerate_channels(device);
-
- device->common.device_alloc_chan_resources =
- ioat_dma_alloc_chan_resources;
- device->common.device_free_chan_resources =
- ioat_dma_free_chan_resources;
- device->common.dev = &pdev->dev;
-
- dma_cap_set(DMA_MEMCPY, device->common.cap_mask);
- device->common.device_is_tx_complete = ioat_dma_is_complete;
- switch (device->version) {
- case IOAT_VER_1_2:
- device->common.device_prep_dma_memcpy = ioat1_dma_prep_memcpy;
- device->common.device_issue_pending =
- ioat1_dma_memcpy_issue_pending;
- break;
- case IOAT_VER_2_0:
- case IOAT_VER_3_0:
- device->common.device_prep_dma_memcpy = ioat2_dma_prep_memcpy;
- device->common.device_issue_pending =
- ioat2_dma_memcpy_issue_pending;
- break;
- }
-
- dev_err(&device->pdev->dev,
- "Intel(R) I/OAT DMA Engine found,"
- " %d channels, device version 0x%02x, driver version %s\n",
- device->common.chancnt, device->version, IOAT_DMA_VERSION);
-
- if (!device->common.chancnt) {
- dev_err(&device->pdev->dev,
- "Intel(R) I/OAT DMA Engine problem found: "
- "zero channels detected\n");
- goto err_setup_interrupts;
- }
-
- err = ioat_dma_setup_interrupts(device);
- if (err)
- goto err_setup_interrupts;
-
- err = ioat_dma_self_test(device);
- if (err)
- goto err_self_test;
-
- ioat_set_tcp_copy_break(device);
-
- dma_async_device_register(&device->common);
-
- if (device->version != IOAT_VER_3_0) {
- INIT_DELAYED_WORK(&device->work, ioat_dma_chan_watchdog);
- schedule_delayed_work(&device->work,
- WATCHDOG_DELAY);
- }
-
- return device;
-
-err_self_test:
- ioat_dma_remove_interrupts(device);
-err_setup_interrupts:
- pci_pool_destroy(device->completion_pool);
-err_completion_pool:
- pci_pool_destroy(device->dma_pool);
-err_dma_pool:
- kfree(device);
-err_kzalloc:
- dev_err(&pdev->dev,
- "Intel(R) I/OAT DMA Engine initialization failed\n");
- return NULL;
-}
-
-void ioat_dma_remove(struct ioatdma_device *device)
-{
- struct dma_chan *chan, *_chan;
- struct ioat_dma_chan *ioat_chan;
-
- if (device->version != IOAT_VER_3_0)
- cancel_delayed_work(&device->work);
-
- ioat_dma_remove_interrupts(device);
-
- dma_async_device_unregister(&device->common);
-
- pci_pool_destroy(device->dma_pool);
- pci_pool_destroy(device->completion_pool);
-
- iounmap(device->reg_base);
- pci_release_regions(device->pdev);
- pci_disable_device(device->pdev);
-
- list_for_each_entry_safe(chan, _chan,
- &device->common.channels, device_node) {
- ioat_chan = to_ioat_chan(chan);
- list_del(&chan->device_node);
- kfree(ioat_chan);
- }
- kfree(device);
-}
-
+++ /dev/null
-/*
- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called COPYING.
- */
-#ifndef IOATDMA_H
-#define IOATDMA_H
-
-#include <linux/dmaengine.h>
-#include "ioatdma_hw.h"
-#include <linux/init.h>
-#include <linux/dmapool.h>
-#include <linux/cache.h>
-#include <linux/pci_ids.h>
-#include <net/tcp.h>
-
-#define IOAT_DMA_VERSION "3.64"
-
-enum ioat_interrupt {
- none = 0,
- msix_multi_vector = 1,
- msix_single_vector = 2,
- msi = 3,
- intx = 4,
-};
-
-#define IOAT_LOW_COMPLETION_MASK 0xffffffc0
-#define IOAT_DMA_DCA_ANY_CPU ~0
-#define IOAT_WATCHDOG_PERIOD (2 * HZ)
-
-
-/**
- * struct ioatdma_device - internal representation of a IOAT device
- * @pdev: PCI-Express device
- * @reg_base: MMIO register space base address
- * @dma_pool: for allocating DMA descriptors
- * @common: embedded struct dma_device
- * @version: version of ioatdma device
- * @irq_mode: which style irq to use
- * @msix_entries: irq handlers
- * @idx: per channel data
- */
-
-struct ioatdma_device {
- struct pci_dev *pdev;
- void __iomem *reg_base;
- struct pci_pool *dma_pool;
- struct pci_pool *completion_pool;
- struct dma_device common;
- u8 version;
- enum ioat_interrupt irq_mode;
- struct delayed_work work;
- struct msix_entry msix_entries[4];
- struct ioat_dma_chan *idx[4];
-};
-
-/**
- * struct ioat_dma_chan - internal representation of a DMA channel
- */
-struct ioat_dma_chan {
-
- void __iomem *reg_base;
-
- dma_cookie_t completed_cookie;
- unsigned long last_completion;
- unsigned long last_completion_time;
-
- size_t xfercap; /* XFERCAP register value expanded out */
-
- spinlock_t cleanup_lock;
- spinlock_t desc_lock;
- struct list_head free_desc;
- struct list_head used_desc;
- unsigned long watchdog_completion;
- int watchdog_tcp_cookie;
- u32 watchdog_last_tcp_cookie;
- struct delayed_work work;
-
- int pending;
- int dmacount;
- int desccount;
-
- struct ioatdma_device *device;
- struct dma_chan common;
-
- dma_addr_t completion_addr;
- union {
- u64 full; /* HW completion writeback */
- struct {
- u32 low;
- u32 high;
- };
- } *completion_virt;
- unsigned long last_compl_desc_addr_hw;
- struct tasklet_struct cleanup_task;
-};
-
-/* wrapper around hardware descriptor format + additional software fields */
-
-/**
- * struct ioat_desc_sw - wrapper around hardware descriptor
- * @hw: hardware DMA descriptor
- * @node: this descriptor will either be on the free list,
- * or attached to a transaction list (async_tx.tx_list)
- * @tx_cnt: number of descriptors required to complete the transaction
- * @async_tx: the generic software descriptor for all engines
- */
-struct ioat_desc_sw {
- struct ioat_dma_descriptor *hw;
- struct list_head node;
- int tx_cnt;
- size_t len;
- dma_addr_t src;
- dma_addr_t dst;
- struct dma_async_tx_descriptor async_tx;
-};
-
-static inline void ioat_set_tcp_copy_break(struct ioatdma_device *dev)
-{
- #ifdef CONFIG_NET_DMA
- switch (dev->version) {
- case IOAT_VER_1_2:
- sysctl_tcp_dma_copybreak = 4096;
- break;
- case IOAT_VER_2_0:
- sysctl_tcp_dma_copybreak = 2048;
- break;
- case IOAT_VER_3_0:
- sysctl_tcp_dma_copybreak = 262144;
- break;
- }
- #endif
-}
-
-#if defined(CONFIG_INTEL_IOATDMA) || defined(CONFIG_INTEL_IOATDMA_MODULE)
-struct ioatdma_device *ioat_dma_probe(struct pci_dev *pdev,
- void __iomem *iobase);
-void ioat_dma_remove(struct ioatdma_device *device);
-struct dca_provider *ioat_dca_init(struct pci_dev *pdev, void __iomem *iobase);
-struct dca_provider *ioat2_dca_init(struct pci_dev *pdev, void __iomem *iobase);
-struct dca_provider *ioat3_dca_init(struct pci_dev *pdev, void __iomem *iobase);
-#else
-#define ioat_dma_probe(pdev, iobase) NULL
-#define ioat_dma_remove(device) do { } while (0)
-#define ioat_dca_init(pdev, iobase) NULL
-#define ioat2_dca_init(pdev, iobase) NULL
-#define ioat3_dca_init(pdev, iobase) NULL
-#endif
-
-#endif /* IOATDMA_H */
+++ /dev/null
-/*
- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called COPYING.
- */
-#ifndef _IOAT_HW_H_
-#define _IOAT_HW_H_
-
-/* PCI Configuration Space Values */
-#define IOAT_PCI_VID 0x8086
-
-/* CB device ID's */
-#define IOAT_PCI_DID_5000 0x1A38
-#define IOAT_PCI_DID_CNB 0x360B
-#define IOAT_PCI_DID_SCNB 0x65FF
-#define IOAT_PCI_DID_SNB 0x402F
-
-#define IOAT_PCI_RID 0x00
-#define IOAT_PCI_SVID 0x8086
-#define IOAT_PCI_SID 0x8086
-#define IOAT_VER_1_2 0x12 /* Version 1.2 */
-#define IOAT_VER_2_0 0x20 /* Version 2.0 */
-#define IOAT_VER_3_0 0x30 /* Version 3.0 */
-
-struct ioat_dma_descriptor {
- uint32_t size;
- uint32_t ctl;
- uint64_t src_addr;
- uint64_t dst_addr;
- uint64_t next;
- uint64_t rsv1;
- uint64_t rsv2;
- uint64_t user1;
- uint64_t user2;
-};
-
-#define IOAT_DMA_DESCRIPTOR_CTL_INT_GN 0x00000001
-#define IOAT_DMA_DESCRIPTOR_CTL_SRC_SN 0x00000002
-#define IOAT_DMA_DESCRIPTOR_CTL_DST_SN 0x00000004
-#define IOAT_DMA_DESCRIPTOR_CTL_CP_STS 0x00000008
-#define IOAT_DMA_DESCRIPTOR_CTL_FRAME 0x00000010
-#define IOAT_DMA_DESCRIPTOR_NUL 0x00000020
-#define IOAT_DMA_DESCRIPTOR_CTL_SP_BRK 0x00000040
-#define IOAT_DMA_DESCRIPTOR_CTL_DP_BRK 0x00000080
-#define IOAT_DMA_DESCRIPTOR_CTL_BNDL 0x00000100
-#define IOAT_DMA_DESCRIPTOR_CTL_DCA 0x00000200
-#define IOAT_DMA_DESCRIPTOR_CTL_BUFHINT 0x00000400
-
-#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_CONTEXT 0xFF000000
-#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_DMA 0x00000000
-
-#define IOAT_DMA_DESCRIPTOR_CTL_CONTEXT_DCA 0x00000001
-#define IOAT_DMA_DESCRIPTOR_CTL_OPCODE_MASK 0xFF000000
-
-#endif
+++ /dev/null
-/*
- * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc., 59
- * Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- *
- * The full GNU General Public License is included in this distribution in the
- * file called COPYING.
- */
-#ifndef _IOAT_REGISTERS_H_
-#define _IOAT_REGISTERS_H_
-
-#define IOAT_PCI_DMACTRL_OFFSET 0x48
-#define IOAT_PCI_DMACTRL_DMA_EN 0x00000001
-#define IOAT_PCI_DMACTRL_MSI_EN 0x00000002
-
-#define IOAT_PCI_DEVICE_ID_OFFSET 0x02
-#define IOAT_PCI_DMAUNCERRSTS_OFFSET 0x148
-#define IOAT_PCI_CHANERRMASK_INT_OFFSET 0x184
-
-/* MMIO Device Registers */
-#define IOAT_CHANCNT_OFFSET 0x00 /* 8-bit */
-
-#define IOAT_XFERCAP_OFFSET 0x01 /* 8-bit */
-#define IOAT_XFERCAP_4KB 12
-#define IOAT_XFERCAP_8KB 13
-#define IOAT_XFERCAP_16KB 14
-#define IOAT_XFERCAP_32KB 15
-#define IOAT_XFERCAP_32GB 0
-
-#define IOAT_GENCTRL_OFFSET 0x02 /* 8-bit */
-#define IOAT_GENCTRL_DEBUG_EN 0x01
-
-#define IOAT_INTRCTRL_OFFSET 0x03 /* 8-bit */
-#define IOAT_INTRCTRL_MASTER_INT_EN 0x01 /* Master Interrupt Enable */
-#define IOAT_INTRCTRL_INT_STATUS 0x02 /* ATTNSTATUS -or- Channel Int */
-#define IOAT_INTRCTRL_INT 0x04 /* INT_STATUS -and- MASTER_INT_EN */
-#define IOAT_INTRCTRL_MSIX_VECTOR_CONTROL 0x08 /* Enable all MSI-X vectors */
-
-#define IOAT_ATTNSTATUS_OFFSET 0x04 /* Each bit is a channel */
-
-#define IOAT_VER_OFFSET 0x08 /* 8-bit */
-#define IOAT_VER_MAJOR_MASK 0xF0
-#define IOAT_VER_MINOR_MASK 0x0F
-#define GET_IOAT_VER_MAJOR(x) (((x) & IOAT_VER_MAJOR_MASK) >> 4)
-#define GET_IOAT_VER_MINOR(x) ((x) & IOAT_VER_MINOR_MASK)
-
-#define IOAT_PERPORTOFFSET_OFFSET 0x0A /* 16-bit */
-
-#define IOAT_INTRDELAY_OFFSET 0x0C /* 16-bit */
-#define IOAT_INTRDELAY_INT_DELAY_MASK 0x3FFF /* Interrupt Delay Time */
-#define IOAT_INTRDELAY_COALESE_SUPPORT 0x8000 /* Interrupt Coalescing Supported */
-
-#define IOAT_DEVICE_STATUS_OFFSET 0x0E /* 16-bit */
-#define IOAT_DEVICE_STATUS_DEGRADED_MODE 0x0001
-
-#define IOAT_CHANNEL_MMIO_SIZE 0x80 /* Each Channel MMIO space is this size */
-
-/* DMA Channel Registers */
-#define IOAT_CHANCTRL_OFFSET 0x00 /* 16-bit Channel Control Register */
-#define IOAT_CHANCTRL_CHANNEL_PRIORITY_MASK 0xF000
-#define IOAT_CHANCTRL_CHANNEL_IN_USE 0x0100
-#define IOAT_CHANCTRL_DESCRIPTOR_ADDR_SNOOP_CONTROL 0x0020
-#define IOAT_CHANCTRL_ERR_INT_EN 0x0010
-#define IOAT_CHANCTRL_ANY_ERR_ABORT_EN 0x0008
-#define IOAT_CHANCTRL_ERR_COMPLETION_EN 0x0004
-#define IOAT_CHANCTRL_INT_DISABLE 0x0001
-
-#define IOAT_DMA_COMP_OFFSET 0x02 /* 16-bit DMA channel compatibility */
-#define IOAT_DMA_COMP_V1 0x0001 /* Compatibility with DMA version 1 */
-#define IOAT_DMA_COMP_V2 0x0002 /* Compatibility with DMA version 2 */
-
-
-#define IOAT1_CHANSTS_OFFSET 0x04 /* 64-bit Channel Status Register */
-#define IOAT2_CHANSTS_OFFSET 0x08 /* 64-bit Channel Status Register */
-#define IOAT_CHANSTS_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHANSTS_OFFSET : IOAT2_CHANSTS_OFFSET)
-#define IOAT1_CHANSTS_OFFSET_LOW 0x04
-#define IOAT2_CHANSTS_OFFSET_LOW 0x08
-#define IOAT_CHANSTS_OFFSET_LOW(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHANSTS_OFFSET_LOW : IOAT2_CHANSTS_OFFSET_LOW)
-#define IOAT1_CHANSTS_OFFSET_HIGH 0x08
-#define IOAT2_CHANSTS_OFFSET_HIGH 0x0C
-#define IOAT_CHANSTS_OFFSET_HIGH(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHANSTS_OFFSET_HIGH : IOAT2_CHANSTS_OFFSET_HIGH)
-#define IOAT_CHANSTS_COMPLETED_DESCRIPTOR_ADDR ~0x3F
-#define IOAT_CHANSTS_SOFT_ERR 0x0000000000000010
-#define IOAT_CHANSTS_UNAFFILIATED_ERR 0x0000000000000008
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS 0x0000000000000007
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE 0x0
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS_DONE 0x1
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS_SUSPENDED 0x2
-#define IOAT_CHANSTS_DMA_TRANSFER_STATUS_HALTED 0x3
-
-
-
-#define IOAT_CHAN_DMACOUNT_OFFSET 0x06 /* 16-bit DMA Count register */
-
-#define IOAT_DCACTRL_OFFSET 0x30 /* 32 bit Direct Cache Access Control Register */
-#define IOAT_DCACTRL_CMPL_WRITE_ENABLE 0x10000
-#define IOAT_DCACTRL_TARGET_CPU_MASK 0xFFFF /* APIC ID */
-
-/* CB DCA Memory Space Registers */
-#define IOAT_DCAOFFSET_OFFSET 0x14
-/* CB_BAR + IOAT_DCAOFFSET value */
-#define IOAT_DCA_VER_OFFSET 0x00
-#define IOAT_DCA_VER_MAJOR_MASK 0xF0
-#define IOAT_DCA_VER_MINOR_MASK 0x0F
-
-#define IOAT_DCA_COMP_OFFSET 0x02
-#define IOAT_DCA_COMP_V1 0x1
-
-#define IOAT_FSB_CAPABILITY_OFFSET 0x04
-#define IOAT_FSB_CAPABILITY_PREFETCH 0x1
-
-#define IOAT_PCI_CAPABILITY_OFFSET 0x06
-#define IOAT_PCI_CAPABILITY_MEMWR 0x1
-
-#define IOAT_FSB_CAP_ENABLE_OFFSET 0x08
-#define IOAT_FSB_CAP_ENABLE_PREFETCH 0x1
-
-#define IOAT_PCI_CAP_ENABLE_OFFSET 0x0A
-#define IOAT_PCI_CAP_ENABLE_MEMWR 0x1
-
-#define IOAT_APICID_TAG_MAP_OFFSET 0x0C
-#define IOAT_APICID_TAG_MAP_TAG0 0x0000000F
-#define IOAT_APICID_TAG_MAP_TAG0_SHIFT 0
-#define IOAT_APICID_TAG_MAP_TAG1 0x000000F0
-#define IOAT_APICID_TAG_MAP_TAG1_SHIFT 4
-#define IOAT_APICID_TAG_MAP_TAG2 0x00000F00
-#define IOAT_APICID_TAG_MAP_TAG2_SHIFT 8
-#define IOAT_APICID_TAG_MAP_TAG3 0x0000F000
-#define IOAT_APICID_TAG_MAP_TAG3_SHIFT 12
-#define IOAT_APICID_TAG_MAP_TAG4 0x000F0000
-#define IOAT_APICID_TAG_MAP_TAG4_SHIFT 16
-#define IOAT_APICID_TAG_CB2_VALID 0x8080808080
-
-#define IOAT_DCA_GREQID_OFFSET 0x10
-#define IOAT_DCA_GREQID_SIZE 0x04
-#define IOAT_DCA_GREQID_MASK 0xFFFF
-#define IOAT_DCA_GREQID_IGNOREFUN 0x10000000
-#define IOAT_DCA_GREQID_VALID 0x20000000
-#define IOAT_DCA_GREQID_LASTID 0x80000000
-
-#define IOAT3_CSI_CAPABILITY_OFFSET 0x08
-#define IOAT3_CSI_CAPABILITY_PREFETCH 0x1
-
-#define IOAT3_PCI_CAPABILITY_OFFSET 0x0A
-#define IOAT3_PCI_CAPABILITY_MEMWR 0x1
-
-#define IOAT3_CSI_CONTROL_OFFSET 0x0C
-#define IOAT3_CSI_CONTROL_PREFETCH 0x1
-
-#define IOAT3_PCI_CONTROL_OFFSET 0x0E
-#define IOAT3_PCI_CONTROL_MEMWR 0x1
-
-#define IOAT3_APICID_TAG_MAP_OFFSET 0x10
-#define IOAT3_APICID_TAG_MAP_OFFSET_LOW 0x10
-#define IOAT3_APICID_TAG_MAP_OFFSET_HIGH 0x14
-
-#define IOAT3_DCA_GREQID_OFFSET 0x02
-
-#define IOAT1_CHAINADDR_OFFSET 0x0C /* 64-bit Descriptor Chain Address Register */
-#define IOAT2_CHAINADDR_OFFSET 0x10 /* 64-bit Descriptor Chain Address Register */
-#define IOAT_CHAINADDR_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHAINADDR_OFFSET : IOAT2_CHAINADDR_OFFSET)
-#define IOAT1_CHAINADDR_OFFSET_LOW 0x0C
-#define IOAT2_CHAINADDR_OFFSET_LOW 0x10
-#define IOAT_CHAINADDR_OFFSET_LOW(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHAINADDR_OFFSET_LOW : IOAT2_CHAINADDR_OFFSET_LOW)
-#define IOAT1_CHAINADDR_OFFSET_HIGH 0x10
-#define IOAT2_CHAINADDR_OFFSET_HIGH 0x14
-#define IOAT_CHAINADDR_OFFSET_HIGH(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHAINADDR_OFFSET_HIGH : IOAT2_CHAINADDR_OFFSET_HIGH)
-
-#define IOAT1_CHANCMD_OFFSET 0x14 /* 8-bit DMA Channel Command Register */
-#define IOAT2_CHANCMD_OFFSET 0x04 /* 8-bit DMA Channel Command Register */
-#define IOAT_CHANCMD_OFFSET(ver) ((ver) < IOAT_VER_2_0 \
- ? IOAT1_CHANCMD_OFFSET : IOAT2_CHANCMD_OFFSET)
-#define IOAT_CHANCMD_RESET 0x20
-#define IOAT_CHANCMD_RESUME 0x10
-#define IOAT_CHANCMD_ABORT 0x08
-#define IOAT_CHANCMD_SUSPEND 0x04
-#define IOAT_CHANCMD_APPEND 0x02
-#define IOAT_CHANCMD_START 0x01
-
-#define IOAT_CHANCMP_OFFSET 0x18 /* 64-bit Channel Completion Address Register */
-#define IOAT_CHANCMP_OFFSET_LOW 0x18
-#define IOAT_CHANCMP_OFFSET_HIGH 0x1C
-
-#define IOAT_CDAR_OFFSET 0x20 /* 64-bit Current Descriptor Address Register */
-#define IOAT_CDAR_OFFSET_LOW 0x20
-#define IOAT_CDAR_OFFSET_HIGH 0x24
-
-#define IOAT_CHANERR_OFFSET 0x28 /* 32-bit Channel Error Register */
-#define IOAT_CHANERR_DMA_TRANSFER_SRC_ADDR_ERR 0x0001
-#define IOAT_CHANERR_DMA_TRANSFER_DEST_ADDR_ERR 0x0002
-#define IOAT_CHANERR_NEXT_DESCRIPTOR_ADDR_ERR 0x0004
-#define IOAT_CHANERR_NEXT_DESCRIPTOR_ALIGNMENT_ERR 0x0008
-#define IOAT_CHANERR_CHAIN_ADDR_VALUE_ERR 0x0010
-#define IOAT_CHANERR_CHANCMD_ERR 0x0020
-#define IOAT_CHANERR_CHIPSET_UNCORRECTABLE_DATA_INTEGRITY_ERR 0x0040
-#define IOAT_CHANERR_DMA_UNCORRECTABLE_DATA_INTEGRITY_ERR 0x0080
-#define IOAT_CHANERR_READ_DATA_ERR 0x0100
-#define IOAT_CHANERR_WRITE_DATA_ERR 0x0200
-#define IOAT_CHANERR_DESCRIPTOR_CONTROL_ERR 0x0400
-#define IOAT_CHANERR_DESCRIPTOR_LENGTH_ERR 0x0800
-#define IOAT_CHANERR_COMPLETION_ADDR_ERR 0x1000
-#define IOAT_CHANERR_INT_CONFIGURATION_ERR 0x2000
-#define IOAT_CHANERR_SOFT_ERR 0x4000
-#define IOAT_CHANERR_UNAFFILIATED_ERR 0x8000
-
-#define IOAT_CHANERR_MASK_OFFSET 0x2C /* 32-bit Channel Error Register */
-
-#endif /* _IOAT_REGISTERS_H_ */
#include <linux/platform_device.h>
#include <linux/memory.h>
#include <linux/ioport.h>
+#include <linux/raid/pq.h>
#include <mach/adma.h>
}
}
+static void
+iop_desc_unmap(struct iop_adma_chan *iop_chan, struct iop_adma_desc_slot *desc)
+{
+ struct dma_async_tx_descriptor *tx = &desc->async_tx;
+ struct iop_adma_desc_slot *unmap = desc->group_head;
+ struct device *dev = &iop_chan->device->pdev->dev;
+ u32 len = unmap->unmap_len;
+ enum dma_ctrl_flags flags = tx->flags;
+ u32 src_cnt;
+ dma_addr_t addr;
+ dma_addr_t dest;
+
+ src_cnt = unmap->unmap_src_cnt;
+ dest = iop_desc_get_dest_addr(unmap, iop_chan);
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ enum dma_data_direction dir;
+
+ if (src_cnt > 1) /* is xor? */
+ dir = DMA_BIDIRECTIONAL;
+ else
+ dir = DMA_FROM_DEVICE;
+
+ dma_unmap_page(dev, dest, len, dir);
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ while (src_cnt--) {
+ addr = iop_desc_get_src_addr(unmap, iop_chan, src_cnt);
+ if (addr == dest)
+ continue;
+ dma_unmap_page(dev, addr, len, DMA_TO_DEVICE);
+ }
+ }
+ desc->group_head = NULL;
+}
+
+static void
+iop_desc_unmap_pq(struct iop_adma_chan *iop_chan, struct iop_adma_desc_slot *desc)
+{
+ struct dma_async_tx_descriptor *tx = &desc->async_tx;
+ struct iop_adma_desc_slot *unmap = desc->group_head;
+ struct device *dev = &iop_chan->device->pdev->dev;
+ u32 len = unmap->unmap_len;
+ enum dma_ctrl_flags flags = tx->flags;
+ u32 src_cnt = unmap->unmap_src_cnt;
+ dma_addr_t pdest = iop_desc_get_dest_addr(unmap, iop_chan);
+ dma_addr_t qdest = iop_desc_get_qdest_addr(unmap, iop_chan);
+ int i;
+
+ if (tx->flags & DMA_PREP_CONTINUE)
+ src_cnt -= 3;
+
+ if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP) && !desc->pq_check_result) {
+ dma_unmap_page(dev, pdest, len, DMA_BIDIRECTIONAL);
+ dma_unmap_page(dev, qdest, len, DMA_BIDIRECTIONAL);
+ }
+
+ if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ dma_addr_t addr;
+
+ for (i = 0; i < src_cnt; i++) {
+ addr = iop_desc_get_src_addr(unmap, iop_chan, i);
+ dma_unmap_page(dev, addr, len, DMA_TO_DEVICE);
+ }
+ if (desc->pq_check_result) {
+ dma_unmap_page(dev, pdest, len, DMA_TO_DEVICE);
+ dma_unmap_page(dev, qdest, len, DMA_TO_DEVICE);
+ }
+ }
+
+ desc->group_head = NULL;
+}
+
+
static dma_cookie_t
iop_adma_run_tx_complete_actions(struct iop_adma_desc_slot *desc,
struct iop_adma_chan *iop_chan, dma_cookie_t cookie)
{
- BUG_ON(desc->async_tx.cookie < 0);
- if (desc->async_tx.cookie > 0) {
- cookie = desc->async_tx.cookie;
- desc->async_tx.cookie = 0;
+ struct dma_async_tx_descriptor *tx = &desc->async_tx;
+
+ BUG_ON(tx->cookie < 0);
+ if (tx->cookie > 0) {
+ cookie = tx->cookie;
+ tx->cookie = 0;
/* call the callback (must not sleep or submit new
* operations to this channel)
*/
- if (desc->async_tx.callback)
- desc->async_tx.callback(
- desc->async_tx.callback_param);
+ if (tx->callback)
+ tx->callback(tx->callback_param);
/* unmap dma addresses
* (unmap_single vs unmap_page?)
*/
if (desc->group_head && desc->unmap_len) {
- struct iop_adma_desc_slot *unmap = desc->group_head;
- struct device *dev =
- &iop_chan->device->pdev->dev;
- u32 len = unmap->unmap_len;
- enum dma_ctrl_flags flags = desc->async_tx.flags;
- u32 src_cnt;
- dma_addr_t addr;
- dma_addr_t dest;
-
- src_cnt = unmap->unmap_src_cnt;
- dest = iop_desc_get_dest_addr(unmap, iop_chan);
- if (!(flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
- enum dma_data_direction dir;
-
- if (src_cnt > 1) /* is xor? */
- dir = DMA_BIDIRECTIONAL;
- else
- dir = DMA_FROM_DEVICE;
-
- dma_unmap_page(dev, dest, len, dir);
- }
-
- if (!(flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
- while (src_cnt--) {
- addr = iop_desc_get_src_addr(unmap,
- iop_chan,
- src_cnt);
- if (addr == dest)
- continue;
- dma_unmap_page(dev, addr, len,
- DMA_TO_DEVICE);
- }
- }
- desc->group_head = NULL;
+ if (iop_desc_is_pq(desc))
+ iop_desc_unmap_pq(iop_chan, desc);
+ else
+ iop_desc_unmap(iop_chan, desc);
}
}
/* run dependent operations */
- dma_run_dependencies(&desc->async_tx);
+ dma_run_dependencies(tx);
return cookie;
}
{
struct iop_adma_chan *iop_chan = (struct iop_adma_chan *) data;
- spin_lock(&iop_chan->lock);
+ /* lockdep will flag depedency submissions as potentially
+ * recursive locking, this is not the case as a dependency
+ * submission will never recurse a channels submit routine.
+ * There are checks in async_tx.c to prevent this.
+ */
+ spin_lock_nested(&iop_chan->lock, SINGLE_DEPTH_NESTING);
__iop_adma_slot_cleanup(iop_chan);
spin_unlock(&iop_chan->lock);
}
}
alloc_tail->group_head = alloc_start;
alloc_tail->async_tx.cookie = -EBUSY;
- list_splice(&chain, &alloc_tail->async_tx.tx_list);
+ list_splice(&chain, &alloc_tail->tx_list);
iop_chan->last_used = last_used;
iop_desc_clear_next_desc(alloc_start);
iop_desc_clear_next_desc(alloc_tail);
old_chain_tail = list_entry(iop_chan->chain.prev,
struct iop_adma_desc_slot, chain_node);
- list_splice_init(&sw_desc->async_tx.tx_list,
+ list_splice_init(&sw_desc->tx_list,
&old_chain_tail->chain_node);
/* fix up the hardware chain */
dma_async_tx_descriptor_init(&slot->async_tx, chan);
slot->async_tx.tx_submit = iop_adma_tx_submit;
+ INIT_LIST_HEAD(&slot->tx_list);
INIT_LIST_HEAD(&slot->chain_node);
INIT_LIST_HEAD(&slot->slot_node);
hw_desc = (char *) iop_chan->device->dma_desc_pool;
}
static struct dma_async_tx_descriptor *
-iop_adma_prep_dma_zero_sum(struct dma_chan *chan, dma_addr_t *dma_src,
- unsigned int src_cnt, size_t len, u32 *result,
- unsigned long flags)
+iop_adma_prep_dma_xor_val(struct dma_chan *chan, dma_addr_t *dma_src,
+ unsigned int src_cnt, size_t len, u32 *result,
+ unsigned long flags)
{
struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
struct iop_adma_desc_slot *sw_desc, *grp_start;
return sw_desc ? &sw_desc->async_tx : NULL;
}
+static struct dma_async_tx_descriptor *
+iop_adma_prep_dma_pq(struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf, size_t len,
+ unsigned long flags)
+{
+ struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
+ struct iop_adma_desc_slot *sw_desc, *g;
+ int slot_cnt, slots_per_op;
+ int continue_srcs;
+
+ if (unlikely(!len))
+ return NULL;
+ BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
+
+ dev_dbg(iop_chan->device->common.dev,
+ "%s src_cnt: %d len: %u flags: %lx\n",
+ __func__, src_cnt, len, flags);
+
+ if (dmaf_p_disabled_continue(flags))
+ continue_srcs = 1+src_cnt;
+ else if (dmaf_continue(flags))
+ continue_srcs = 3+src_cnt;
+ else
+ continue_srcs = 0+src_cnt;
+
+ spin_lock_bh(&iop_chan->lock);
+ slot_cnt = iop_chan_pq_slot_count(len, continue_srcs, &slots_per_op);
+ sw_desc = iop_adma_alloc_slots(iop_chan, slot_cnt, slots_per_op);
+ if (sw_desc) {
+ int i;
+
+ g = sw_desc->group_head;
+ iop_desc_set_byte_count(g, iop_chan, len);
+
+ /* even if P is disabled its destination address (bits
+ * [3:0]) must match Q. It is ok if P points to an
+ * invalid address, it won't be written.
+ */
+ if (flags & DMA_PREP_PQ_DISABLE_P)
+ dst[0] = dst[1] & 0x7;
+
+ iop_desc_set_pq_addr(g, dst);
+ sw_desc->unmap_src_cnt = src_cnt;
+ sw_desc->unmap_len = len;
+ sw_desc->async_tx.flags = flags;
+ for (i = 0; i < src_cnt; i++)
+ iop_desc_set_pq_src_addr(g, i, src[i], scf[i]);
+
+ /* if we are continuing a previous operation factor in
+ * the old p and q values, see the comment for dma_maxpq
+ * in include/linux/dmaengine.h
+ */
+ if (dmaf_p_disabled_continue(flags))
+ iop_desc_set_pq_src_addr(g, i++, dst[1], 1);
+ else if (dmaf_continue(flags)) {
+ iop_desc_set_pq_src_addr(g, i++, dst[0], 0);
+ iop_desc_set_pq_src_addr(g, i++, dst[1], 1);
+ iop_desc_set_pq_src_addr(g, i++, dst[1], 0);
+ }
+ iop_desc_init_pq(g, i, flags);
+ }
+ spin_unlock_bh(&iop_chan->lock);
+
+ return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
+static struct dma_async_tx_descriptor *
+iop_adma_prep_dma_pq_val(struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf,
+ size_t len, enum sum_check_flags *pqres,
+ unsigned long flags)
+{
+ struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
+ struct iop_adma_desc_slot *sw_desc, *g;
+ int slot_cnt, slots_per_op;
+
+ if (unlikely(!len))
+ return NULL;
+ BUG_ON(len > IOP_ADMA_XOR_MAX_BYTE_COUNT);
+
+ dev_dbg(iop_chan->device->common.dev, "%s src_cnt: %d len: %u\n",
+ __func__, src_cnt, len);
+
+ spin_lock_bh(&iop_chan->lock);
+ slot_cnt = iop_chan_pq_zero_sum_slot_count(len, src_cnt + 2, &slots_per_op);
+ sw_desc = iop_adma_alloc_slots(iop_chan, slot_cnt, slots_per_op);
+ if (sw_desc) {
+ /* for validate operations p and q are tagged onto the
+ * end of the source list
+ */
+ int pq_idx = src_cnt;
+
+ g = sw_desc->group_head;
+ iop_desc_init_pq_zero_sum(g, src_cnt+2, flags);
+ iop_desc_set_pq_zero_sum_byte_count(g, len);
+ g->pq_check_result = pqres;
+ pr_debug("\t%s: g->pq_check_result: %p\n",
+ __func__, g->pq_check_result);
+ sw_desc->unmap_src_cnt = src_cnt+2;
+ sw_desc->unmap_len = len;
+ sw_desc->async_tx.flags = flags;
+ while (src_cnt--)
+ iop_desc_set_pq_zero_sum_src_addr(g, src_cnt,
+ src[src_cnt],
+ scf[src_cnt]);
+ iop_desc_set_pq_zero_sum_addr(g, pq_idx, src);
+ }
+ spin_unlock_bh(&iop_chan->lock);
+
+ return sw_desc ? &sw_desc->async_tx : NULL;
+}
+
static void iop_adma_free_chan_resources(struct dma_chan *chan)
{
struct iop_adma_chan *iop_chan = to_iop_adma_chan(chan);
#define IOP_ADMA_NUM_SRC_TEST 4 /* must be <= 15 */
static int __devinit
-iop_adma_xor_zero_sum_self_test(struct iop_adma_device *device)
+iop_adma_xor_val_self_test(struct iop_adma_device *device)
{
int i, src_idx;
struct page *dest;
PAGE_SIZE, DMA_TO_DEVICE);
/* skip zero sum if the capability is not present */
- if (!dma_has_cap(DMA_ZERO_SUM, dma_chan->device->cap_mask))
+ if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask))
goto free_resources;
/* zero sum the sources with the destintation page */
dma_srcs[i] = dma_map_page(dma_chan->device->dev,
zero_sum_srcs[i], 0, PAGE_SIZE,
DMA_TO_DEVICE);
- tx = iop_adma_prep_dma_zero_sum(dma_chan, dma_srcs,
- IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
- &zero_sum_result,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ tx = iop_adma_prep_dma_xor_val(dma_chan, dma_srcs,
+ IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
+ &zero_sum_result,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
dma_srcs[i] = dma_map_page(dma_chan->device->dev,
zero_sum_srcs[i], 0, PAGE_SIZE,
DMA_TO_DEVICE);
- tx = iop_adma_prep_dma_zero_sum(dma_chan, dma_srcs,
- IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
- &zero_sum_result,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ tx = iop_adma_prep_dma_xor_val(dma_chan, dma_srcs,
+ IOP_ADMA_NUM_SRC_TEST + 1, PAGE_SIZE,
+ &zero_sum_result,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
cookie = iop_adma_tx_submit(tx);
iop_adma_issue_pending(dma_chan);
return err;
}
+#ifdef CONFIG_MD_RAID6_PQ
+static int __devinit
+iop_adma_pq_zero_sum_self_test(struct iop_adma_device *device)
+{
+ /* combined sources, software pq results, and extra hw pq results */
+ struct page *pq[IOP_ADMA_NUM_SRC_TEST+2+2];
+ /* ptr to the extra hw pq buffers defined above */
+ struct page **pq_hw = &pq[IOP_ADMA_NUM_SRC_TEST+2];
+ /* address conversion buffers (dma_map / page_address) */
+ void *pq_sw[IOP_ADMA_NUM_SRC_TEST+2];
+ dma_addr_t pq_src[IOP_ADMA_NUM_SRC_TEST];
+ dma_addr_t pq_dest[2];
+
+ int i;
+ struct dma_async_tx_descriptor *tx;
+ struct dma_chan *dma_chan;
+ dma_cookie_t cookie;
+ u32 zero_sum_result;
+ int err = 0;
+ struct device *dev;
+
+ dev_dbg(device->common.dev, "%s\n", __func__);
+
+ for (i = 0; i < ARRAY_SIZE(pq); i++) {
+ pq[i] = alloc_page(GFP_KERNEL);
+ if (!pq[i]) {
+ while (i--)
+ __free_page(pq[i]);
+ return -ENOMEM;
+ }
+ }
+
+ /* Fill in src buffers */
+ for (i = 0; i < IOP_ADMA_NUM_SRC_TEST; i++) {
+ pq_sw[i] = page_address(pq[i]);
+ memset(pq_sw[i], 0x11111111 * (1<<i), PAGE_SIZE);
+ }
+ pq_sw[i] = page_address(pq[i]);
+ pq_sw[i+1] = page_address(pq[i+1]);
+
+ dma_chan = container_of(device->common.channels.next,
+ struct dma_chan,
+ device_node);
+ if (iop_adma_alloc_chan_resources(dma_chan) < 1) {
+ err = -ENODEV;
+ goto out;
+ }
+
+ dev = dma_chan->device->dev;
+
+ /* initialize the dests */
+ memset(page_address(pq_hw[0]), 0 , PAGE_SIZE);
+ memset(page_address(pq_hw[1]), 0 , PAGE_SIZE);
+
+ /* test pq */
+ pq_dest[0] = dma_map_page(dev, pq_hw[0], 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ pq_dest[1] = dma_map_page(dev, pq_hw[1], 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ for (i = 0; i < IOP_ADMA_NUM_SRC_TEST; i++)
+ pq_src[i] = dma_map_page(dev, pq[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+
+ tx = iop_adma_prep_dma_pq(dma_chan, pq_dest, pq_src,
+ IOP_ADMA_NUM_SRC_TEST, (u8 *)raid6_gfexp,
+ PAGE_SIZE,
+ DMA_PREP_INTERRUPT |
+ DMA_CTRL_ACK);
+
+ cookie = iop_adma_tx_submit(tx);
+ iop_adma_issue_pending(dma_chan);
+ msleep(8);
+
+ if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) !=
+ DMA_SUCCESS) {
+ dev_err(dev, "Self-test pq timed out, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ raid6_call.gen_syndrome(IOP_ADMA_NUM_SRC_TEST+2, PAGE_SIZE, pq_sw);
+
+ if (memcmp(pq_sw[IOP_ADMA_NUM_SRC_TEST],
+ page_address(pq_hw[0]), PAGE_SIZE) != 0) {
+ dev_err(dev, "Self-test p failed compare, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+ if (memcmp(pq_sw[IOP_ADMA_NUM_SRC_TEST+1],
+ page_address(pq_hw[1]), PAGE_SIZE) != 0) {
+ dev_err(dev, "Self-test q failed compare, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ /* test correct zero sum using the software generated pq values */
+ for (i = 0; i < IOP_ADMA_NUM_SRC_TEST + 2; i++)
+ pq_src[i] = dma_map_page(dev, pq[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+
+ zero_sum_result = ~0;
+ tx = iop_adma_prep_dma_pq_val(dma_chan, &pq_src[IOP_ADMA_NUM_SRC_TEST],
+ pq_src, IOP_ADMA_NUM_SRC_TEST,
+ raid6_gfexp, PAGE_SIZE, &zero_sum_result,
+ DMA_PREP_INTERRUPT|DMA_CTRL_ACK);
+
+ cookie = iop_adma_tx_submit(tx);
+ iop_adma_issue_pending(dma_chan);
+ msleep(8);
+
+ if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) !=
+ DMA_SUCCESS) {
+ dev_err(dev, "Self-test pq-zero-sum timed out, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ if (zero_sum_result != 0) {
+ dev_err(dev, "Self-test pq-zero-sum failed to validate: %x\n",
+ zero_sum_result);
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ /* test incorrect zero sum */
+ i = IOP_ADMA_NUM_SRC_TEST;
+ memset(pq_sw[i] + 100, 0, 100);
+ memset(pq_sw[i+1] + 200, 0, 200);
+ for (i = 0; i < IOP_ADMA_NUM_SRC_TEST + 2; i++)
+ pq_src[i] = dma_map_page(dev, pq[i], 0, PAGE_SIZE,
+ DMA_TO_DEVICE);
+
+ zero_sum_result = 0;
+ tx = iop_adma_prep_dma_pq_val(dma_chan, &pq_src[IOP_ADMA_NUM_SRC_TEST],
+ pq_src, IOP_ADMA_NUM_SRC_TEST,
+ raid6_gfexp, PAGE_SIZE, &zero_sum_result,
+ DMA_PREP_INTERRUPT|DMA_CTRL_ACK);
+
+ cookie = iop_adma_tx_submit(tx);
+ iop_adma_issue_pending(dma_chan);
+ msleep(8);
+
+ if (iop_adma_is_complete(dma_chan, cookie, NULL, NULL) !=
+ DMA_SUCCESS) {
+ dev_err(dev, "Self-test !pq-zero-sum timed out, disabling\n");
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+ if (zero_sum_result != (SUM_CHECK_P_RESULT | SUM_CHECK_Q_RESULT)) {
+ dev_err(dev, "Self-test !pq-zero-sum failed to validate: %x\n",
+ zero_sum_result);
+ err = -ENODEV;
+ goto free_resources;
+ }
+
+free_resources:
+ iop_adma_free_chan_resources(dma_chan);
+out:
+ i = ARRAY_SIZE(pq);
+ while (i--)
+ __free_page(pq[i]);
+ return err;
+}
+#endif
+
static int __devexit iop_adma_remove(struct platform_device *dev)
{
struct iop_adma_device *device = platform_get_drvdata(dev);
dma_dev->max_xor = iop_adma_get_max_xor();
dma_dev->device_prep_dma_xor = iop_adma_prep_dma_xor;
}
- if (dma_has_cap(DMA_ZERO_SUM, dma_dev->cap_mask))
- dma_dev->device_prep_dma_zero_sum =
- iop_adma_prep_dma_zero_sum;
+ if (dma_has_cap(DMA_XOR_VAL, dma_dev->cap_mask))
+ dma_dev->device_prep_dma_xor_val =
+ iop_adma_prep_dma_xor_val;
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
+ dma_set_maxpq(dma_dev, iop_adma_get_max_pq(), 0);
+ dma_dev->device_prep_dma_pq = iop_adma_prep_dma_pq;
+ }
+ if (dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask))
+ dma_dev->device_prep_dma_pq_val =
+ iop_adma_prep_dma_pq_val;
if (dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask))
dma_dev->device_prep_dma_interrupt =
iop_adma_prep_dma_interrupt;
}
if (dma_has_cap(DMA_XOR, dma_dev->cap_mask) ||
- dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)) {
- ret = iop_adma_xor_zero_sum_self_test(adev);
+ dma_has_cap(DMA_MEMSET, dma_dev->cap_mask)) {
+ ret = iop_adma_xor_val_self_test(adev);
dev_dbg(&pdev->dev, "xor self test returned %d\n", ret);
if (ret)
goto err_free_iop_chan;
}
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask) &&
+ dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask)) {
+ #ifdef CONFIG_MD_RAID6_PQ
+ ret = iop_adma_pq_zero_sum_self_test(adev);
+ dev_dbg(&pdev->dev, "pq self test returned %d\n", ret);
+ #else
+ /* can not test raid6, so do not publish capability */
+ dma_cap_clear(DMA_PQ, dma_dev->cap_mask);
+ dma_cap_clear(DMA_PQ_VAL, dma_dev->cap_mask);
+ ret = 0;
+ #endif
+ if (ret)
+ goto err_free_iop_chan;
+ }
+
dev_printk(KERN_INFO, &pdev->dev, "Intel(R) IOP: "
- "( %s%s%s%s%s%s%s%s%s%s)\n",
- dma_has_cap(DMA_PQ_XOR, dma_dev->cap_mask) ? "pq_xor " : "",
- dma_has_cap(DMA_PQ_UPDATE, dma_dev->cap_mask) ? "pq_update " : "",
- dma_has_cap(DMA_PQ_ZERO_SUM, dma_dev->cap_mask) ? "pq_zero_sum " : "",
+ "( %s%s%s%s%s%s%s)\n",
+ dma_has_cap(DMA_PQ, dma_dev->cap_mask) ? "pq " : "",
+ dma_has_cap(DMA_PQ_VAL, dma_dev->cap_mask) ? "pq_val " : "",
dma_has_cap(DMA_XOR, dma_dev->cap_mask) ? "xor " : "",
- dma_has_cap(DMA_DUAL_XOR, dma_dev->cap_mask) ? "dual_xor " : "",
- dma_has_cap(DMA_ZERO_SUM, dma_dev->cap_mask) ? "xor_zero_sum " : "",
+ dma_has_cap(DMA_XOR_VAL, dma_dev->cap_mask) ? "xor_val " : "",
dma_has_cap(DMA_MEMSET, dma_dev->cap_mask) ? "fill " : "",
- dma_has_cap(DMA_MEMCPY_CRC32C, dma_dev->cap_mask) ? "cpy+crc " : "",
dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask) ? "cpy " : "",
dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask) ? "intr " : "");
if (sw_desc) {
grp_start = sw_desc->group_head;
- list_splice_init(&sw_desc->async_tx.tx_list, &iop_chan->chain);
+ list_splice_init(&sw_desc->tx_list, &iop_chan->chain);
async_tx_ack(&sw_desc->async_tx);
iop_desc_init_memcpy(grp_start, 0);
iop_desc_set_byte_count(grp_start, iop_chan, 0);
sw_desc = iop_adma_alloc_slots(iop_chan, slot_cnt, slots_per_op);
if (sw_desc) {
grp_start = sw_desc->group_head;
- list_splice_init(&sw_desc->async_tx.tx_list, &iop_chan->chain);
+ list_splice_init(&sw_desc->tx_list, &iop_chan->chain);
async_tx_ack(&sw_desc->async_tx);
iop_desc_init_null_xor(grp_start, 2, 0);
iop_desc_set_byte_count(grp_start, iop_chan, 0);
iov_byte_offset,
kdata,
copy);
+ /* poll for a descriptor slot */
+ if (unlikely(dma_cookie < 0)) {
+ dma_async_issue_pending(chan);
+ continue;
+ }
len -= copy;
iov[iovec_idx].iov_len -= copy;
page,
offset,
copy);
+ /* poll for a descriptor slot */
+ if (unlikely(dma_cookie < 0)) {
+ dma_async_issue_pending(chan);
+ continue;
+ }
len -= copy;
iov[iovec_idx].iov_len -= copy;
}
alloc_tail->group_head = alloc_start;
alloc_tail->async_tx.cookie = -EBUSY;
- list_splice(&chain, &alloc_tail->async_tx.tx_list);
+ list_splice(&chain, &alloc_tail->tx_list);
mv_chan->last_used = last_used;
mv_desc_clear_next_desc(alloc_start);
mv_desc_clear_next_desc(alloc_tail);
cookie = mv_desc_assign_cookie(mv_chan, sw_desc);
if (list_empty(&mv_chan->chain))
- list_splice_init(&sw_desc->async_tx.tx_list, &mv_chan->chain);
+ list_splice_init(&sw_desc->tx_list, &mv_chan->chain);
else {
new_hw_chain = 0;
old_chain_tail = list_entry(mv_chan->chain.prev,
struct mv_xor_desc_slot,
chain_node);
- list_splice_init(&grp_start->async_tx.tx_list,
+ list_splice_init(&grp_start->tx_list,
&old_chain_tail->chain_node);
if (!mv_can_chain(grp_start))
slot->async_tx.tx_submit = mv_xor_tx_submit;
INIT_LIST_HEAD(&slot->chain_node);
INIT_LIST_HEAD(&slot->slot_node);
+ INIT_LIST_HEAD(&slot->tx_list);
hw_desc = (char *) mv_chan->device->dma_desc_pool;
slot->async_tx.phys =
(dma_addr_t) &hw_desc[idx * MV_XOR_SLOT_SIZE];
* @idx: pool index
* @unmap_src_cnt: number of xor sources
* @unmap_len: transaction bytecount
+ * @tx_list: list of slots that make up a multi-descriptor transaction
* @async_tx: support for the async_tx api
- * @group_list: list of slots that make up a multi-descriptor transaction
- * for example transfer lengths larger than the supported hw max
* @xor_check_result: result of zero sum
* @crc32_result: result crc calculation
*/
u16 unmap_src_cnt;
u32 value;
size_t unmap_len;
+ struct list_head tx_list;
struct dma_async_tx_descriptor async_tx;
union {
u32 *xor_check_result;
--- /dev/null
+/*
+ * Renesas SuperH DMA Engine support
+ *
+ * base is drivers/dma/flsdma.c
+ *
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
+ * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * - DMA of SuperH does not have Hardware DMA chain mode.
+ * - MAX DMA size is 16MB.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/platform_device.h>
+#include <cpu/dma.h>
+#include <asm/dma-sh.h>
+#include "shdma.h"
+
+/* DMA descriptor control */
+#define DESC_LAST (-1)
+#define DESC_COMP (1)
+#define DESC_NCOMP (0)
+
+#define NR_DESCS_PER_CHANNEL 32
+/*
+ * Define the default configuration for dual address memory-memory transfer.
+ * The 0x400 value represents auto-request, external->external.
+ *
+ * And this driver set 4byte burst mode.
+ * If you want to change mode, you need to change RS_DEFAULT of value.
+ * (ex 1byte burst mode -> (RS_DUAL & ~TS_32)
+ */
+#define RS_DEFAULT (RS_DUAL)
+
+#define SH_DMAC_CHAN_BASE(id) (dma_base_addr[id])
+static void sh_dmae_writel(struct sh_dmae_chan *sh_dc, u32 data, u32 reg)
+{
+ ctrl_outl(data, (SH_DMAC_CHAN_BASE(sh_dc->id) + reg));
+}
+
+static u32 sh_dmae_readl(struct sh_dmae_chan *sh_dc, u32 reg)
+{
+ return ctrl_inl((SH_DMAC_CHAN_BASE(sh_dc->id) + reg));
+}
+
+static void dmae_init(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = RS_DEFAULT; /* default is DUAL mode */
+ sh_dmae_writel(sh_chan, chcr, CHCR);
+}
+
+/*
+ * Reset DMA controller
+ *
+ * SH7780 has two DMAOR register
+ */
+static void sh_dmae_ctl_stop(int id)
+{
+ unsigned short dmaor = dmaor_read_reg(id);
+
+ dmaor &= ~(DMAOR_NMIF | DMAOR_AE);
+ dmaor_write_reg(id, dmaor);
+}
+
+static int sh_dmae_rst(int id)
+{
+ unsigned short dmaor;
+
+ sh_dmae_ctl_stop(id);
+ dmaor = (dmaor_read_reg(id)|DMAOR_INIT);
+
+ dmaor_write_reg(id, dmaor);
+ if ((dmaor_read_reg(id) & (DMAOR_AE | DMAOR_NMIF))) {
+ pr_warning(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int dmae_is_idle(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+ if (chcr & CHCR_DE) {
+ if (!(chcr & CHCR_TE))
+ return -EBUSY; /* working */
+ }
+ return 0; /* waiting */
+}
+
+static inline unsigned int calc_xmit_shift(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+ return ts_shift[(chcr & CHCR_TS_MASK) >> CHCR_TS_SHIFT];
+}
+
+static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs hw)
+{
+ sh_dmae_writel(sh_chan, hw.sar, SAR);
+ sh_dmae_writel(sh_chan, hw.dar, DAR);
+ sh_dmae_writel(sh_chan,
+ (hw.tcr >> calc_xmit_shift(sh_chan)), TCR);
+}
+
+static void dmae_start(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+
+ chcr |= (CHCR_DE|CHCR_IE);
+ sh_dmae_writel(sh_chan, chcr, CHCR);
+}
+
+static void dmae_halt(struct sh_dmae_chan *sh_chan)
+{
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+
+ chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE);
+ sh_dmae_writel(sh_chan, chcr, CHCR);
+}
+
+static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
+{
+ int ret = dmae_is_idle(sh_chan);
+ /* When DMA was working, can not set data to CHCR */
+ if (ret)
+ return ret;
+
+ sh_dmae_writel(sh_chan, val, CHCR);
+ return 0;
+}
+
+#define DMARS1_ADDR 0x04
+#define DMARS2_ADDR 0x08
+#define DMARS_SHIFT 8
+#define DMARS_CHAN_MSK 0x01
+static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
+{
+ u32 addr;
+ int shift = 0;
+ int ret = dmae_is_idle(sh_chan);
+ if (ret)
+ return ret;
+
+ if (sh_chan->id & DMARS_CHAN_MSK)
+ shift = DMARS_SHIFT;
+
+ switch (sh_chan->id) {
+ /* DMARS0 */
+ case 0:
+ case 1:
+ addr = SH_DMARS_BASE;
+ break;
+ /* DMARS1 */
+ case 2:
+ case 3:
+ addr = (SH_DMARS_BASE + DMARS1_ADDR);
+ break;
+ /* DMARS2 */
+ case 4:
+ case 5:
+ addr = (SH_DMARS_BASE + DMARS2_ADDR);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ctrl_outw((val << shift) |
+ (ctrl_inw(addr) & (shift ? 0xFF00 : 0x00FF)),
+ addr);
+
+ return 0;
+}
+
+static dma_cookie_t sh_dmae_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ struct sh_desc *desc = tx_to_sh_desc(tx);
+ struct sh_dmae_chan *sh_chan = to_sh_chan(tx->chan);
+ dma_cookie_t cookie;
+
+ spin_lock_bh(&sh_chan->desc_lock);
+
+ cookie = sh_chan->common.cookie;
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
+
+ /* If desc only in the case of 1 */
+ if (desc->async_tx.cookie != -EBUSY)
+ desc->async_tx.cookie = cookie;
+ sh_chan->common.cookie = desc->async_tx.cookie;
+
+ list_splice_init(&desc->tx_list, sh_chan->ld_queue.prev);
+
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ return cookie;
+}
+
+static struct sh_desc *sh_dmae_get_desc(struct sh_dmae_chan *sh_chan)
+{
+ struct sh_desc *desc, *_desc, *ret = NULL;
+
+ spin_lock_bh(&sh_chan->desc_lock);
+ list_for_each_entry_safe(desc, _desc, &sh_chan->ld_free, node) {
+ if (async_tx_test_ack(&desc->async_tx)) {
+ list_del(&desc->node);
+ ret = desc;
+ break;
+ }
+ }
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ return ret;
+}
+
+static void sh_dmae_put_desc(struct sh_dmae_chan *sh_chan, struct sh_desc *desc)
+{
+ if (desc) {
+ spin_lock_bh(&sh_chan->desc_lock);
+
+ list_splice_init(&desc->tx_list, &sh_chan->ld_free);
+ list_add(&desc->node, &sh_chan->ld_free);
+
+ spin_unlock_bh(&sh_chan->desc_lock);
+ }
+}
+
+static int sh_dmae_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+ struct sh_desc *desc;
+
+ spin_lock_bh(&sh_chan->desc_lock);
+ while (sh_chan->descs_allocated < NR_DESCS_PER_CHANNEL) {
+ spin_unlock_bh(&sh_chan->desc_lock);
+ desc = kzalloc(sizeof(struct sh_desc), GFP_KERNEL);
+ if (!desc) {
+ spin_lock_bh(&sh_chan->desc_lock);
+ break;
+ }
+ dma_async_tx_descriptor_init(&desc->async_tx,
+ &sh_chan->common);
+ desc->async_tx.tx_submit = sh_dmae_tx_submit;
+ desc->async_tx.flags = DMA_CTRL_ACK;
+ INIT_LIST_HEAD(&desc->tx_list);
+ sh_dmae_put_desc(sh_chan, desc);
+
+ spin_lock_bh(&sh_chan->desc_lock);
+ sh_chan->descs_allocated++;
+ }
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ return sh_chan->descs_allocated;
+}
+
+/*
+ * sh_dma_free_chan_resources - Free all resources of the channel.
+ */
+static void sh_dmae_free_chan_resources(struct dma_chan *chan)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+ struct sh_desc *desc, *_desc;
+ LIST_HEAD(list);
+
+ BUG_ON(!list_empty(&sh_chan->ld_queue));
+ spin_lock_bh(&sh_chan->desc_lock);
+
+ list_splice_init(&sh_chan->ld_free, &list);
+ sh_chan->descs_allocated = 0;
+
+ spin_unlock_bh(&sh_chan->desc_lock);
+
+ list_for_each_entry_safe(desc, _desc, &list, node)
+ kfree(desc);
+}
+
+static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy(
+ struct dma_chan *chan, dma_addr_t dma_dest, dma_addr_t dma_src,
+ size_t len, unsigned long flags)
+{
+ struct sh_dmae_chan *sh_chan;
+ struct sh_desc *first = NULL, *prev = NULL, *new;
+ size_t copy_size;
+
+ if (!chan)
+ return NULL;
+
+ if (!len)
+ return NULL;
+
+ sh_chan = to_sh_chan(chan);
+
+ do {
+ /* Allocate the link descriptor from DMA pool */
+ new = sh_dmae_get_desc(sh_chan);
+ if (!new) {
+ dev_err(sh_chan->dev,
+ "No free memory for link descriptor\n");
+ goto err_get_desc;
+ }
+
+ copy_size = min(len, (size_t)SH_DMA_TCR_MAX);
+
+ new->hw.sar = dma_src;
+ new->hw.dar = dma_dest;
+ new->hw.tcr = copy_size;
+ if (!first)
+ first = new;
+
+ new->mark = DESC_NCOMP;
+ async_tx_ack(&new->async_tx);
+
+ prev = new;
+ len -= copy_size;
+ dma_src += copy_size;
+ dma_dest += copy_size;
+ /* Insert the link descriptor to the LD ring */
+ list_add_tail(&new->node, &first->tx_list);
+ } while (len);
+
+ new->async_tx.flags = flags; /* client is in control of this ack */
+ new->async_tx.cookie = -EBUSY; /* Last desc */
+
+ return &first->async_tx;
+
+err_get_desc:
+ sh_dmae_put_desc(sh_chan, first);
+ return NULL;
+
+}
+
+/*
+ * sh_chan_ld_cleanup - Clean up link descriptors
+ *
+ * This function clean up the ld_queue of DMA channel.
+ */
+static void sh_dmae_chan_ld_cleanup(struct sh_dmae_chan *sh_chan)
+{
+ struct sh_desc *desc, *_desc;
+
+ spin_lock_bh(&sh_chan->desc_lock);
+ list_for_each_entry_safe(desc, _desc, &sh_chan->ld_queue, node) {
+ dma_async_tx_callback callback;
+ void *callback_param;
+
+ /* non send data */
+ if (desc->mark == DESC_NCOMP)
+ break;
+
+ /* send data sesc */
+ callback = desc->async_tx.callback;
+ callback_param = desc->async_tx.callback_param;
+
+ /* Remove from ld_queue list */
+ list_splice_init(&desc->tx_list, &sh_chan->ld_free);
+
+ dev_dbg(sh_chan->dev, "link descriptor %p will be recycle.\n",
+ desc);
+
+ list_move(&desc->node, &sh_chan->ld_free);
+ /* Run the link descriptor callback function */
+ if (callback) {
+ spin_unlock_bh(&sh_chan->desc_lock);
+ dev_dbg(sh_chan->dev, "link descriptor %p callback\n",
+ desc);
+ callback(callback_param);
+ spin_lock_bh(&sh_chan->desc_lock);
+ }
+ }
+ spin_unlock_bh(&sh_chan->desc_lock);
+}
+
+static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan)
+{
+ struct list_head *ld_node;
+ struct sh_dmae_regs hw;
+
+ /* DMA work check */
+ if (dmae_is_idle(sh_chan))
+ return;
+
+ /* Find the first un-transfer desciptor */
+ for (ld_node = sh_chan->ld_queue.next;
+ (ld_node != &sh_chan->ld_queue)
+ && (to_sh_desc(ld_node)->mark == DESC_COMP);
+ ld_node = ld_node->next)
+ cpu_relax();
+
+ if (ld_node != &sh_chan->ld_queue) {
+ /* Get the ld start address from ld_queue */
+ hw = to_sh_desc(ld_node)->hw;
+ dmae_set_reg(sh_chan, hw);
+ dmae_start(sh_chan);
+ }
+}
+
+static void sh_dmae_memcpy_issue_pending(struct dma_chan *chan)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+ sh_chan_xfer_ld_queue(sh_chan);
+}
+
+static enum dma_status sh_dmae_is_complete(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ dma_cookie_t *done,
+ dma_cookie_t *used)
+{
+ struct sh_dmae_chan *sh_chan = to_sh_chan(chan);
+ dma_cookie_t last_used;
+ dma_cookie_t last_complete;
+
+ sh_dmae_chan_ld_cleanup(sh_chan);
+
+ last_used = chan->cookie;
+ last_complete = sh_chan->completed_cookie;
+ if (last_complete == -EBUSY)
+ last_complete = last_used;
+
+ if (done)
+ *done = last_complete;
+
+ if (used)
+ *used = last_used;
+
+ return dma_async_is_complete(cookie, last_complete, last_used);
+}
+
+static irqreturn_t sh_dmae_interrupt(int irq, void *data)
+{
+ irqreturn_t ret = IRQ_NONE;
+ struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data;
+ u32 chcr = sh_dmae_readl(sh_chan, CHCR);
+
+ if (chcr & CHCR_TE) {
+ /* DMA stop */
+ dmae_halt(sh_chan);
+
+ ret = IRQ_HANDLED;
+ tasklet_schedule(&sh_chan->tasklet);
+ }
+
+ return ret;
+}
+
+#if defined(CONFIG_CPU_SH4)
+static irqreturn_t sh_dmae_err(int irq, void *data)
+{
+ int err = 0;
+ struct sh_dmae_device *shdev = (struct sh_dmae_device *)data;
+
+ /* IRQ Multi */
+ if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
+ int cnt = 0;
+ switch (irq) {
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+ case DMTE6_IRQ:
+ cnt++;
+#endif
+ case DMTE0_IRQ:
+ if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) {
+ disable_irq(irq);
+ return IRQ_HANDLED;
+ }
+ default:
+ return IRQ_NONE;
+ }
+ } else {
+ /* reset dma controller */
+ err = sh_dmae_rst(0);
+ if (err)
+ return err;
+ if (shdev->pdata.mode & SHDMA_DMAOR1) {
+ err = sh_dmae_rst(1);
+ if (err)
+ return err;
+ }
+ disable_irq(irq);
+ return IRQ_HANDLED;
+ }
+}
+#endif
+
+static void dmae_do_tasklet(unsigned long data)
+{
+ struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data;
+ struct sh_desc *desc, *_desc, *cur_desc = NULL;
+ u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
+ list_for_each_entry_safe(desc, _desc,
+ &sh_chan->ld_queue, node) {
+ if ((desc->hw.sar + desc->hw.tcr) == sar_buf) {
+ cur_desc = desc;
+ break;
+ }
+ }
+
+ if (cur_desc) {
+ switch (cur_desc->async_tx.cookie) {
+ case 0: /* other desc data */
+ break;
+ case -EBUSY: /* last desc */
+ sh_chan->completed_cookie =
+ cur_desc->async_tx.cookie;
+ break;
+ default: /* first desc ( 0 < )*/
+ sh_chan->completed_cookie =
+ cur_desc->async_tx.cookie - 1;
+ break;
+ }
+ cur_desc->mark = DESC_COMP;
+ }
+ /* Next desc */
+ sh_chan_xfer_ld_queue(sh_chan);
+ sh_dmae_chan_ld_cleanup(sh_chan);
+}
+
+static unsigned int get_dmae_irq(unsigned int id)
+{
+ unsigned int irq = 0;
+ if (id < ARRAY_SIZE(dmte_irq_map))
+ irq = dmte_irq_map[id];
+ return irq;
+}
+
+static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id)
+{
+ int err;
+ unsigned int irq = get_dmae_irq(id);
+ unsigned long irqflags = IRQF_DISABLED;
+ struct sh_dmae_chan *new_sh_chan;
+
+ /* alloc channel */
+ new_sh_chan = kzalloc(sizeof(struct sh_dmae_chan), GFP_KERNEL);
+ if (!new_sh_chan) {
+ dev_err(shdev->common.dev, "No free memory for allocating "
+ "dma channels!\n");
+ return -ENOMEM;
+ }
+
+ new_sh_chan->dev = shdev->common.dev;
+ new_sh_chan->id = id;
+
+ /* Init DMA tasklet */
+ tasklet_init(&new_sh_chan->tasklet, dmae_do_tasklet,
+ (unsigned long)new_sh_chan);
+
+ /* Init the channel */
+ dmae_init(new_sh_chan);
+
+ spin_lock_init(&new_sh_chan->desc_lock);
+
+ /* Init descripter manage list */
+ INIT_LIST_HEAD(&new_sh_chan->ld_queue);
+ INIT_LIST_HEAD(&new_sh_chan->ld_free);
+
+ /* copy struct dma_device */
+ new_sh_chan->common.device = &shdev->common;
+
+ /* Add the channel to DMA device channel list */
+ list_add_tail(&new_sh_chan->common.device_node,
+ &shdev->common.channels);
+ shdev->common.chancnt++;
+
+ if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
+ irqflags = IRQF_SHARED;
+#if defined(DMTE6_IRQ)
+ if (irq >= DMTE6_IRQ)
+ irq = DMTE6_IRQ;
+ else
+#endif
+ irq = DMTE0_IRQ;
+ }
+
+ snprintf(new_sh_chan->dev_id, sizeof(new_sh_chan->dev_id),
+ "sh-dmae%d", new_sh_chan->id);
+
+ /* set up channel irq */
+ err = request_irq(irq, &sh_dmae_interrupt,
+ irqflags, new_sh_chan->dev_id, new_sh_chan);
+ if (err) {
+ dev_err(shdev->common.dev, "DMA channel %d request_irq error "
+ "with return %d\n", id, err);
+ goto err_no_irq;
+ }
+
+ /* CHCR register control function */
+ new_sh_chan->set_chcr = dmae_set_chcr;
+ /* DMARS register control function */
+ new_sh_chan->set_dmars = dmae_set_dmars;
+
+ shdev->chan[id] = new_sh_chan;
+ return 0;
+
+err_no_irq:
+ /* remove from dmaengine device node */
+ list_del(&new_sh_chan->common.device_node);
+ kfree(new_sh_chan);
+ return err;
+}
+
+static void sh_dmae_chan_remove(struct sh_dmae_device *shdev)
+{
+ int i;
+
+ for (i = shdev->common.chancnt - 1 ; i >= 0 ; i--) {
+ if (shdev->chan[i]) {
+ struct sh_dmae_chan *shchan = shdev->chan[i];
+ if (!(shdev->pdata.mode & SHDMA_MIX_IRQ))
+ free_irq(dmte_irq_map[i], shchan);
+
+ list_del(&shchan->common.device_node);
+ kfree(shchan);
+ shdev->chan[i] = NULL;
+ }
+ }
+ shdev->common.chancnt = 0;
+}
+
+static int __init sh_dmae_probe(struct platform_device *pdev)
+{
+ int err = 0, cnt, ecnt;
+ unsigned long irqflags = IRQF_DISABLED;
+#if defined(CONFIG_CPU_SH4)
+ int eirq[] = { DMAE0_IRQ,
+#if defined(DMAE1_IRQ)
+ DMAE1_IRQ
+#endif
+ };
+#endif
+ struct sh_dmae_device *shdev;
+
+ shdev = kzalloc(sizeof(struct sh_dmae_device), GFP_KERNEL);
+ if (!shdev) {
+ dev_err(&pdev->dev, "No enough memory\n");
+ err = -ENOMEM;
+ goto shdev_err;
+ }
+
+ /* get platform data */
+ if (!pdev->dev.platform_data)
+ goto shdev_err;
+
+ /* platform data */
+ memcpy(&shdev->pdata, pdev->dev.platform_data,
+ sizeof(struct sh_dmae_pdata));
+
+ /* reset dma controller */
+ err = sh_dmae_rst(0);
+ if (err)
+ goto rst_err;
+
+ /* SH7780/85/23 has DMAOR1 */
+ if (shdev->pdata.mode & SHDMA_DMAOR1) {
+ err = sh_dmae_rst(1);
+ if (err)
+ goto rst_err;
+ }
+
+ INIT_LIST_HEAD(&shdev->common.channels);
+
+ dma_cap_set(DMA_MEMCPY, shdev->common.cap_mask);
+ shdev->common.device_alloc_chan_resources
+ = sh_dmae_alloc_chan_resources;
+ shdev->common.device_free_chan_resources = sh_dmae_free_chan_resources;
+ shdev->common.device_prep_dma_memcpy = sh_dmae_prep_memcpy;
+ shdev->common.device_is_tx_complete = sh_dmae_is_complete;
+ shdev->common.device_issue_pending = sh_dmae_memcpy_issue_pending;
+ shdev->common.dev = &pdev->dev;
+
+#if defined(CONFIG_CPU_SH4)
+ /* Non Mix IRQ mode SH7722/SH7730 etc... */
+ if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
+ irqflags = IRQF_SHARED;
+ eirq[0] = DMTE0_IRQ;
+#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ)
+ eirq[1] = DMTE6_IRQ;
+#endif
+ }
+
+ for (ecnt = 0 ; ecnt < ARRAY_SIZE(eirq); ecnt++) {
+ err = request_irq(eirq[ecnt], sh_dmae_err,
+ irqflags, "DMAC Address Error", shdev);
+ if (err) {
+ dev_err(&pdev->dev, "DMA device request_irq"
+ "error (irq %d) with return %d\n",
+ eirq[ecnt], err);
+ goto eirq_err;
+ }
+ }
+#endif /* CONFIG_CPU_SH4 */
+
+ /* Create DMA Channel */
+ for (cnt = 0 ; cnt < MAX_DMA_CHANNELS ; cnt++) {
+ err = sh_dmae_chan_probe(shdev, cnt);
+ if (err)
+ goto chan_probe_err;
+ }
+
+ platform_set_drvdata(pdev, shdev);
+ dma_async_device_register(&shdev->common);
+
+ return err;
+
+chan_probe_err:
+ sh_dmae_chan_remove(shdev);
+
+eirq_err:
+ for (ecnt-- ; ecnt >= 0; ecnt--)
+ free_irq(eirq[ecnt], shdev);
+
+rst_err:
+ kfree(shdev);
+
+shdev_err:
+ return err;
+}
+
+static int __exit sh_dmae_remove(struct platform_device *pdev)
+{
+ struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
+
+ dma_async_device_unregister(&shdev->common);
+
+ if (shdev->pdata.mode & SHDMA_MIX_IRQ) {
+ free_irq(DMTE0_IRQ, shdev);
+#if defined(DMTE6_IRQ)
+ free_irq(DMTE6_IRQ, shdev);
+#endif
+ }
+
+ /* channel data remove */
+ sh_dmae_chan_remove(shdev);
+
+ if (!(shdev->pdata.mode & SHDMA_MIX_IRQ)) {
+ free_irq(DMAE0_IRQ, shdev);
+#if defined(DMAE1_IRQ)
+ free_irq(DMAE1_IRQ, shdev);
+#endif
+ }
+ kfree(shdev);
+
+ return 0;
+}
+
+static void sh_dmae_shutdown(struct platform_device *pdev)
+{
+ struct sh_dmae_device *shdev = platform_get_drvdata(pdev);
+ sh_dmae_ctl_stop(0);
+ if (shdev->pdata.mode & SHDMA_DMAOR1)
+ sh_dmae_ctl_stop(1);
+}
+
+static struct platform_driver sh_dmae_driver = {
+ .remove = __exit_p(sh_dmae_remove),
+ .shutdown = sh_dmae_shutdown,
+ .driver = {
+ .name = "sh-dma-engine",
+ },
+};
+
+static int __init sh_dmae_init(void)
+{
+ return platform_driver_probe(&sh_dmae_driver, sh_dmae_probe);
+}
+module_init(sh_dmae_init);
+
+static void __exit sh_dmae_exit(void)
+{
+ platform_driver_unregister(&sh_dmae_driver);
+}
+module_exit(sh_dmae_exit);
+
+MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
+MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Renesas SuperH DMA Engine support
+ *
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ * Copyright (C) 2009 Renesas Solutions, Inc. All rights reserved.
+ *
+ * This is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __DMA_SHDMA_H
+#define __DMA_SHDMA_H
+
+#include <linux/device.h>
+#include <linux/dmapool.h>
+#include <linux/dmaengine.h>
+
+#define SH_DMA_TCR_MAX 0x00FFFFFF /* 16MB */
+
+struct sh_dmae_regs {
+ u32 sar; /* SAR / source address */
+ u32 dar; /* DAR / destination address */
+ u32 tcr; /* TCR / transfer count */
+};
+
+struct sh_desc {
+ struct list_head tx_list;
+ struct sh_dmae_regs hw;
+ struct list_head node;
+ struct dma_async_tx_descriptor async_tx;
+ int mark;
+};
+
+struct sh_dmae_chan {
+ dma_cookie_t completed_cookie; /* The maximum cookie completed */
+ spinlock_t desc_lock; /* Descriptor operation lock */
+ struct list_head ld_queue; /* Link descriptors queue */
+ struct list_head ld_free; /* Link descriptors free */
+ struct dma_chan common; /* DMA common channel */
+ struct device *dev; /* Channel device */
+ struct tasklet_struct tasklet; /* Tasklet */
+ int descs_allocated; /* desc count */
+ int id; /* Raw id of this channel */
+ char dev_id[16]; /* unique name per DMAC of channel */
+
+ /* Set chcr */
+ int (*set_chcr)(struct sh_dmae_chan *sh_chan, u32 regs);
+ /* Set DMA resource */
+ int (*set_dmars)(struct sh_dmae_chan *sh_chan, u16 res);
+};
+
+struct sh_dmae_device {
+ struct dma_device common;
+ struct sh_dmae_chan *chan[MAX_DMA_CHANNELS];
+ struct sh_dmae_pdata pdata;
+};
+
+#define to_sh_chan(chan) container_of(chan, struct sh_dmae_chan, common)
+#define to_sh_desc(lh) container_of(lh, struct sh_desc, node)
+#define tx_to_sh_desc(tx) container_of(tx, struct sh_desc, async_tx)
+
+#endif /* __DMA_SHDMA_H */
static struct txx9dmac_desc *txx9dmac_last_child(struct txx9dmac_desc *desc)
{
- if (!list_empty(&desc->txd.tx_list))
- desc = list_entry(desc->txd.tx_list.prev,
- struct txx9dmac_desc, desc_node);
+ if (!list_empty(&desc->tx_list))
+ desc = list_entry(desc->tx_list.prev, typeof(*desc), desc_node);
return desc;
}
desc = kzalloc(sizeof(*desc), flags);
if (!desc)
return NULL;
+ INIT_LIST_HEAD(&desc->tx_list);
dma_async_tx_descriptor_init(&desc->txd, &dc->chan);
desc->txd.tx_submit = txx9dmac_tx_submit;
/* txd.flags will be overwritten in prep funcs */
struct txx9dmac_dev *ddev = dc->ddev;
struct txx9dmac_desc *child;
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dma_sync_single_for_cpu(chan2parent(&dc->chan),
child->txd.phys, ddev->descsize,
DMA_TO_DEVICE);
txx9dmac_sync_desc_for_cpu(dc, desc);
spin_lock_bh(&dc->lock);
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
dev_vdbg(chan2dev(&dc->chan),
"moving child desc %p to freelist\n",
child);
- list_splice_init(&desc->txd.tx_list, &dc->free_list);
+ list_splice_init(&desc->tx_list, &dc->free_list);
dev_vdbg(chan2dev(&dc->chan), "moving desc %p to freelist\n",
desc);
list_add(&desc->desc_node, &dc->free_list);
param = txd->callback_param;
txx9dmac_sync_desc_for_cpu(dc, desc);
- list_splice_init(&txd->tx_list, &dc->free_list);
+ list_splice_init(&desc->tx_list, &dc->free_list);
list_move(&desc->desc_node, &dc->free_list);
if (!ds) {
"Bad descriptor submitted for DMA! (cookie: %d)\n",
bad_desc->txd.cookie);
txx9dmac_dump_desc(dc, &bad_desc->hwdesc);
- list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &bad_desc->tx_list, desc_node)
txx9dmac_dump_desc(dc, &child->hwdesc);
/* Pretend the descriptor completed successfully */
txx9dmac_descriptor_complete(dc, bad_desc);
return;
}
- list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+ list_for_each_entry(child, &desc->tx_list, desc_node)
if (desc_read_CHAR(dc, child) == chain) {
/* Currently in progress */
if (csr & TXX9_DMA_CSR_ABCHC)
dma_sync_single_for_device(chan2parent(&dc->chan),
prev->txd.phys, ddev->descsize,
DMA_TO_DEVICE);
- list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ list_add_tail(&desc->desc_node, &first->tx_list);
}
prev = desc;
}
prev->txd.phys,
ddev->descsize,
DMA_TO_DEVICE);
- list_add_tail(&desc->desc_node,
- &first->txd.tx_list);
+ list_add_tail(&desc->desc_node, &first->tx_list);
}
prev = desc;
}
/* THEN values for driver housekeeping */
struct list_head desc_node ____cacheline_aligned;
+ struct list_head tx_list;
struct dma_async_tx_descriptor txd;
size_t len;
};
Source file name and line number where debugging message
printed will be added to debugging message.
+ config EDAC_DECODE_MCE
+ tristate "Decode MCEs in human-readable form (only on AMD for now)"
+ depends on CPU_SUP_AMD && X86_MCE
+ default y
+ ---help---
+ Enable this option if you want to decode Machine Check Exceptions
+ occuring on your machine in human-readable form.
+
+ You should definitely say Y here in case you want to decode MCEs
+ which occur really early upon boot, before the module infrastructure
+ has been initialized.
+
config EDAC_MM_EDAC
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
help
config EDAC_AMD64
tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
- depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && CPU_SUP_AMD
+ depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI && EDAC_DECODE_MCE
help
Support for error detection and correction on the AMD 64
Families of Memory Controllers (K8, F10h and F11h)
Support for error detection and correction on the Intel
3000 and 3010 server chipsets.
+config EDAC_I3200
+ tristate "Intel 3200"
+ depends on EDAC_MM_EDAC && PCI && X86 && EXPERIMENTAL
+ help
+ Support for error detection and correction on the Intel
+ 3200 and 3210 server chipsets.
+
config EDAC_X38
tristate "Intel X38"
depends on EDAC_MM_EDAC && PCI && X86
San Clemente MCH.
config EDAC_MPC85XX
- tristate "Freescale MPC85xx"
- depends on EDAC_MM_EDAC && FSL_SOC && MPC85xx
+ tristate "Freescale MPC83xx / MPC85xx"
+ depends on EDAC_MM_EDAC && FSL_SOC && (PPC_83xx || MPC85xx)
help
Support for error detection and correction on the Freescale
- MPC8560, MPC8540, MPC8548
+ MPC8349, MPC8560, MPC8540, MPC8548
config EDAC_MV64X60
tristate "Marvell MV64x60"
# GNU General Public License.
#
-
obj-$(CONFIG_EDAC) := edac_stub.o
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
edac_core-objs += edac_pci.o edac_pci_sysfs.o
endif
-ifdef CONFIG_CPU_SUP_AMD
-edac_core-objs += edac_mce_amd.o
-endif
+obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
obj-$(CONFIG_EDAC_CPC925) += cpc925_edac.o
obj-$(CONFIG_EDAC_I82875P) += i82875p_edac.o
obj-$(CONFIG_EDAC_I82975X) += i82975x_edac.o
obj-$(CONFIG_EDAC_I3000) += i3000_edac.o
+obj-$(CONFIG_EDAC_I3200) += i3200_edac.o
obj-$(CONFIG_EDAC_X38) += x38_edac.o
obj-$(CONFIG_EDAC_I82860) += i82860_edac.o
obj-$(CONFIG_EDAC_R82600) += r82600_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
+
/* Lookup table for all possible MC control instances */
struct amd64_pvt;
-static struct mem_ctl_info *mci_lookup[MAX_NUMNODES];
-static struct amd64_pvt *pvt_lookup[MAX_NUMNODES];
+static struct mem_ctl_info *mci_lookup[EDAC_MAX_NUMNODES];
+static struct amd64_pvt *pvt_lookup[EDAC_MAX_NUMNODES];
/*
* See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
/* Map from a CSROW entry to the mask entry that operates on it */
static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
{
- return csrow >> (pvt->num_dcsm >> 3);
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F)
+ return csrow;
+ else
+ return csrow >> 1;
}
/* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */
intlv_en = pvt->dram_IntlvEn[0];
if (intlv_en == 0) {
- for (node_id = 0; ; ) {
+ for (node_id = 0; node_id < DRAM_REG_COUNT; node_id++) {
if (amd64_base_limit_match(pvt, sys_addr, node_id))
- break;
-
- if (++node_id >= DRAM_REG_COUNT)
- goto err_no_match;
+ goto found;
}
- goto found;
+ goto err_no_match;
}
- if (unlikely((intlv_en != (0x01 << 8)) &&
- (intlv_en != (0x03 << 8)) &&
- (intlv_en != (0x07 << 8)))) {
+ if (unlikely((intlv_en != 0x01) &&
+ (intlv_en != 0x03) &&
+ (intlv_en != 0x07))) {
amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from "
"IntlvEn field of DRAM Base Register for node 0: "
- "This probably indicates a BIOS bug.\n", intlv_en);
+ "this probably indicates a BIOS bug.\n", intlv_en);
return NULL;
}
bits = (((u32) sys_addr) >> 12) & intlv_en;
for (node_id = 0; ; ) {
- if ((pvt->dram_limit[node_id] & intlv_en) == bits)
+ if ((pvt->dram_IntlvSel[node_id] & intlv_en) == bits)
break; /* intlv_sel field matches */
if (++node_id >= DRAM_REG_COUNT)
/* sanity test for sys_addr */
if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) {
amd64_printk(KERN_WARNING,
- "%s(): sys_addr 0x%lx falls outside base/limit "
- "address range for node %d with node interleaving "
- "enabled.\n", __func__, (unsigned long)sys_addr,
- node_id);
+ "%s(): sys_addr 0x%llx falls outside base/limit "
+ "address range for node %d with node interleaving "
+ "enabled.\n",
+ __func__, sys_addr, node_id);
return NULL;
}
* base/mask register pair, test the condition shown near the start of
* section 3.5.4 (p. 84, BKDG #26094, K8, revA-E).
*/
- for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+ for (csrow = 0; csrow < pvt->cs_count; csrow++) {
/* This DRAM chip select is disabled on this node */
if ((pvt->dcsb0[csrow] & K8_DCSB_CS_ENABLE) == 0)
u64 base, mask;
pvt = mci->pvt_info;
- BUG_ON((csrow < 0) || (csrow >= CHIPSELECT_COUNT));
+ BUG_ON((csrow < 0) || (csrow >= pvt->cs_count));
base = base_from_dct_base(pvt, csrow);
mask = mask_from_dct_mask(pvt, csrow);
*/
static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
{
- if (pvt->ext_model >= OPTERON_CPU_REV_F) {
+
+ if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) {
+ pvt->dcsb_base = REV_E_DCSB_BASE_BITS;
+ pvt->dcsm_mask = REV_E_DCSM_MASK_BITS;
+ pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS;
+ pvt->dcs_shift = REV_E_DCS_SHIFT;
+ pvt->cs_count = 8;
+ pvt->num_dcsm = 8;
+ } else {
pvt->dcsb_base = REV_F_F1Xh_DCSB_BASE_BITS;
pvt->dcsm_mask = REV_F_F1Xh_DCSM_MASK_BITS;
pvt->dcs_mask_notused = REV_F_F1Xh_DCS_NOTUSED_BITS;
pvt->dcs_shift = REV_F_F1Xh_DCS_SHIFT;
- switch (boot_cpu_data.x86) {
- case 0xf:
- pvt->num_dcsm = REV_F_DCSM_COUNT;
- break;
-
- case 0x10:
- pvt->num_dcsm = F10_DCSM_COUNT;
- break;
-
- case 0x11:
- pvt->num_dcsm = F11_DCSM_COUNT;
- break;
-
- default:
- amd64_printk(KERN_ERR, "Unsupported family!\n");
- break;
+ if (boot_cpu_data.x86 == 0x11) {
+ pvt->cs_count = 4;
+ pvt->num_dcsm = 2;
+ } else {
+ pvt->cs_count = 8;
+ pvt->num_dcsm = 4;
}
- } else {
- pvt->dcsb_base = REV_E_DCSB_BASE_BITS;
- pvt->dcsm_mask = REV_E_DCSM_MASK_BITS;
- pvt->dcs_mask_notused = REV_E_DCS_NOTUSED_BITS;
- pvt->dcs_shift = REV_E_DCS_SHIFT;
- pvt->num_dcsm = REV_E_DCSM_COUNT;
}
}
amd64_set_dct_base_and_mask(pvt);
- for (cs = 0; cs < CHIPSELECT_COUNT; cs++) {
+ for (cs = 0; cs < pvt->cs_count; cs++) {
reg = K8_DCSB0 + (cs * 4);
err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
&pvt->dcsb0[cs]);
* different from the node that detected the error.
*/
src_mci = find_mc_by_sys_addr(mci, SystemAddress);
- if (src_mci) {
+ if (!src_mci) {
amd64_mc_printk(mci, KERN_ERR,
"failed to map error address 0x%lx to a node\n",
(unsigned long)SystemAddress);
pvt->dram_IntlvEn[dram] = (low_base >> 8) & 0x7;
- pvt->dram_base[dram] = (((((u64) high_base & 0x000000FF) << 32) |
- ((u64) low_base & 0xFFFF0000))) << 8;
+ pvt->dram_base[dram] = (((u64)high_base & 0x000000FF) << 40) |
+ (((u64)low_base & 0xFFFF0000) << 8);
low_offset = K8_DRAM_LIMIT_LOW + (dram << 3);
high_offset = F10_DRAM_LIMIT_HIGH + (dram << 3);
* Extract address values and form a LIMIT address. Limit is the HIGHEST
* memory location of the region, so low 24 bits need to be all ones.
*/
- low_limit |= 0x0000FFFF;
- pvt->dram_limit[dram] =
- ((((u64) high_limit << 32) + (u64) low_limit) << 8) | (0xFF);
+ pvt->dram_limit[dram] = (((u64)high_limit & 0x000000FF) << 40) |
+ (((u64) low_limit & 0xFFFF0000) << 8) |
+ 0x00FFFFFF;
}
static void f10_read_dram_ctl_register(struct amd64_pvt *pvt)
debugf1("InputAddr=0x%x channelselect=%d\n", in_addr, cs);
- for (csrow = 0; csrow < CHIPSELECT_COUNT; csrow++) {
+ for (csrow = 0; csrow < pvt->cs_count; csrow++) {
cs_base = amd64_get_dct_base(pvt, cs, csrow);
if (!(cs_base & K8_DCSB_CS_ENABLE))
{
u32 ec = ERROR_CODE(info->nbsl);
u32 xec = EXT_ERROR_CODE(info->nbsl);
- int ecc_type = info->nbsh & (0x3 << 13);
+ int ecc_type = (info->nbsh >> 13) & 0x3;
/* Bail early out if this was an 'observed' error */
if (PP(ec) == K8_NBSL_PP_OBS)
* NOTE: CPU Revision Dependent code
*
* Input:
- * @csrow_nr ChipSelect Row Number (0..CHIPSELECT_COUNT-1)
+ * @csrow_nr ChipSelect Row Number (0..pvt->cs_count-1)
* k8 private pointer to -->
* DRAM Bank Address mapping register
* node_id
(pvt->nbcfg & K8_NBCFG_ECC_ENABLE) ? "Enabled" : "Disabled"
);
- for (i = 0; i < CHIPSELECT_COUNT; i++) {
+ for (i = 0; i < pvt->cs_count; i++) {
csrow = &mci->csrows[i];
if ((pvt->dcsb0[i] & K8_DCSB_CS_ENABLE) == 0) {
goto err_exit;
ret = -ENOMEM;
- mci = edac_mc_alloc(0, CHIPSELECT_COUNT, pvt->channel_count, node_id);
+ mci = edac_mc_alloc(0, pvt->cs_count, pvt->channel_count, node_id);
if (!mci)
goto err_exit;
opstate_init();
if (cache_k8_northbridges() < 0)
- goto err_exit;
+ return err;
err = pci_register_driver(&amd64_pci_driver);
if (err)
err_2nd_stage:
debugf0("2nd stage failed\n");
-
-err_exit:
pci_unregister_driver(&amd64_pci_driver);
return err;
#define EDAC_AMD64_VERSION " Ver: 3.2.0 " __DATE__
#define EDAC_MOD_STR "amd64_edac"
+#define EDAC_MAX_NUMNODES 8
+
/* Extended Model from CPUID, for CPU Revision numbers */
#define OPTERON_CPU_LE_REV_C 0
#define OPTERON_CPU_REV_D 1
#define OPTERON_CPU_REV_FA 5
/* Hardware limit on ChipSelect rows per MC and processors per system */
-#define CHIPSELECT_COUNT 8
+#define MAX_CS_COUNT 8
#define DRAM_REG_COUNT 8
*/
#define REV_E_DCSB_BASE_BITS (0xFFE0FE00ULL)
#define REV_E_DCS_SHIFT 4
-#define REV_E_DCSM_COUNT 8
#define REV_F_F1Xh_DCSB_BASE_BITS (0x1FF83FE0ULL)
#define REV_F_F1Xh_DCS_SHIFT 8
*/
#define REV_F_DCSB_BASE_BITS (0x1FF83FE0ULL)
#define REV_F_DCS_SHIFT 8
-#define REV_F_DCSM_COUNT 4
-#define F10_DCSM_COUNT 4
-#define F11_DCSM_COUNT 2
/* DRAM CS Mask Registers */
#define K8_DCSM0 0x60
#define SET_NB_DRAM_INJECTION_WRITE(word, bits) \
(BIT(((word) & 0xF) + 20) | \
- BIT(17) | \
- ((bits) & 0xF))
+ BIT(17) | bits)
#define SET_NB_DRAM_INJECTION_READ(word, bits) \
(BIT(((word) & 0xF) + 20) | \
- BIT(16) | \
- ((bits) & 0xF))
+ BIT(16) | bits)
#define K8_NBCAP 0xE8
#define K8_NBCAP_CORES (BIT(12)|BIT(13))
u32 dbam1; /* DRAM Base Address Mapping reg for DCT1 */
/* DRAM CS Base Address Registers F2x[1,0][5C:40] */
- u32 dcsb0[CHIPSELECT_COUNT];
- u32 dcsb1[CHIPSELECT_COUNT];
+ u32 dcsb0[MAX_CS_COUNT];
+ u32 dcsb1[MAX_CS_COUNT];
/* DRAM CS Mask Registers F2x[1,0][6C:60] */
- u32 dcsm0[CHIPSELECT_COUNT];
- u32 dcsm1[CHIPSELECT_COUNT];
+ u32 dcsm0[MAX_CS_COUNT];
+ u32 dcsm1[MAX_CS_COUNT];
/*
* Decoded parts of DRAM BASE and LIMIT Registers
*/
u32 dcsb_base; /* DCSB base bits */
u32 dcsm_mask; /* DCSM mask bits */
+ u32 cs_count; /* num chip selects (== num DCSB registers) */
u32 num_dcsm; /* Number of DCSM registers */
u32 dcs_mask_notused; /* DCSM notused mask bits */
u32 dcs_shift; /* DCSB and DCSM shift value */
#include "amd64_edac.h"
+static ssize_t amd64_inject_section_show(struct mem_ctl_info *mci, char *buf)
+{
+ struct amd64_pvt *pvt = mci->pvt_info;
+ return sprintf(buf, "0x%x\n", pvt->injection.section);
+}
+
/*
* store error injection section value which refers to one of 4 16-byte sections
* within a 64-byte cacheline
ret = strict_strtoul(data, 10, &value);
if (ret != -EINVAL) {
+
+ if (value > 3) {
+ amd64_printk(KERN_WARNING,
+ "%s: invalid section 0x%lx\n",
+ __func__, value);
+ return -EINVAL;
+ }
+
pvt->injection.section = (u32) value;
return count;
}
return ret;
}
+static ssize_t amd64_inject_word_show(struct mem_ctl_info *mci, char *buf)
+{
+ struct amd64_pvt *pvt = mci->pvt_info;
+ return sprintf(buf, "0x%x\n", pvt->injection.word);
+}
+
/*
* store error injection word value which refers to one of 9 16-bit word of the
* 16-byte (128-bit + ECC bits) section
ret = strict_strtoul(data, 10, &value);
if (ret != -EINVAL) {
- value = (value <= 8) ? value : 0;
- pvt->injection.word = (u32) value;
+ if (value > 8) {
+ amd64_printk(KERN_WARNING,
+ "%s: invalid word 0x%lx\n",
+ __func__, value);
+ return -EINVAL;
+ }
+ pvt->injection.word = (u32) value;
return count;
}
return ret;
}
+static ssize_t amd64_inject_ecc_vector_show(struct mem_ctl_info *mci, char *buf)
+{
+ struct amd64_pvt *pvt = mci->pvt_info;
+ return sprintf(buf, "0x%x\n", pvt->injection.bit_map);
+}
+
/*
* store 16 bit error injection vector which enables injecting errors to the
* corresponding bit within the error injection word above. When used during a
ret = strict_strtoul(data, 16, &value);
if (ret != -EINVAL) {
- pvt->injection.bit_map = (u32) value & 0xFFFF;
+ if (value & 0xFFFF0000) {
+ amd64_printk(KERN_WARNING,
+ "%s: invalid EccVector: 0x%lx\n",
+ __func__, value);
+ return -EINVAL;
+ }
+ pvt->injection.bit_map = (u32) value;
return count;
}
return ret;
.name = "inject_section",
.mode = (S_IRUGO | S_IWUSR)
},
- .show = NULL,
+ .show = amd64_inject_section_show,
.store = amd64_inject_section_store,
},
{
.name = "inject_word",
.mode = (S_IRUGO | S_IWUSR)
},
- .show = NULL,
+ .show = amd64_inject_word_show,
.store = amd64_inject_word_store,
},
{
.name = "inject_ecc_vector",
.mode = (S_IRUGO | S_IWUSR)
},
- .show = NULL,
+ .show = amd64_inject_ecc_vector_show,
.store = amd64_inject_ecc_vector_store,
},
{
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdev->name)) {
cpc925_printk(KERN_ERR, "Unable to request mem region\n");
res = -EBUSY;
goto err1;
}
- vbase = devm_ioremap(&pdev->dev, r->start, r->end - r->start + 1);
+ vbase = devm_ioremap(&pdev->dev, r->start, resource_size(r));
if (!vbase) {
cpc925_printk(KERN_ERR, "Unable to ioremap device\n");
res = -ENOMEM;
cpc925_mc_exit(mci);
edac_mc_free(mci);
err2:
- devm_release_mem_region(&pdev->dev, r->start, r->end-r->start+1);
+ devm_release_mem_region(&pdev->dev, r->start, resource_size(r));
err1:
devres_release_group(&pdev->dev, cpc925_probe);
out:
edac_dev = container_of(head, struct edac_device_ctl_info, rcu);
INIT_LIST_HEAD(&edac_dev->link);
- complete(&edac_dev->removal_complete);
}
/*
*edac_device)
{
list_del_rcu(&edac_device->link);
-
- init_completion(&edac_device->removal_complete);
call_rcu(&edac_device->rcu, complete_edac_device_list_del);
- wait_for_completion(&edac_device->removal_complete);
+ rcu_barrier();
}
/*
mci = container_of(head, struct mem_ctl_info, rcu);
INIT_LIST_HEAD(&mci->link);
- complete(&mci->complete);
}
static void del_mc_from_global_list(struct mem_ctl_info *mci)
{
atomic_dec(&edac_handlers);
list_del_rcu(&mci->link);
- init_completion(&mci->complete);
call_rcu(&mci->rcu, complete_mc_list_del);
- wait_for_completion(&mci->complete);
+ rcu_barrier();
}
/**
static bool report_gart_errors;
static void (*nb_bus_decoder)(int node_id, struct err_regs *regs);
+static void (*orig_mce_callback)(struct mce *m);
void amd_report_gart_errors(bool v)
{
pr_warning("Huh? Unknown MCE error 0x%x\n", ec);
}
-void decode_mce(struct mce *m)
+static void amd_decode_mce(struct mce *m)
{
struct err_regs regs;
int node, ecc;
amd_decode_err_code(m->status & 0xffff);
}
+
+static int __init mce_amd_init(void)
+{
+ /*
+ * We can decode MCEs for Opteron and later CPUs:
+ */
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
+ (boot_cpu_data.x86 >= 0xf)) {
+ /* safe the default decode mce callback */
+ orig_mce_callback = x86_mce_decode_callback;
+
+ x86_mce_decode_callback = amd_decode_mce;
+ }
+
+ return 0;
+}
+early_initcall(mce_amd_init);
+
+#ifdef MODULE
+static void __exit mce_amd_exit(void)
+{
+ x86_mce_decode_callback = orig_mce_callback;
+}
+
+MODULE_DESCRIPTION("AMD MCE decoder");
+MODULE_ALIAS("edac-mce-amd");
+MODULE_LICENSE("GPL");
+module_exit(mce_amd_exit);
+#endif
pci = container_of(head, struct edac_pci_ctl_info, rcu);
INIT_LIST_HEAD(&pci->link);
- complete(&pci->complete);
}
/*
static void del_edac_pci_from_global_list(struct edac_pci_ctl_info *pci)
{
list_del_rcu(&pci->link);
- init_completion(&pci->complete);
call_rcu(&pci->rcu, complete_edac_pci_list_del);
- wait_for_completion(&pci->complete);
+ rcu_barrier();
}
#if 0
--- /dev/null
+/*
+ * Intel 3200/3210 Memory Controller kernel module
+ * Copyright (C) 2008-2009 Akamai Technologies, Inc.
+ * Portions by Hitoshi Mitake <h.mitake@gmail.com>.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/edac.h>
+#include <linux/io.h>
+#include "edac_core.h"
+
+#define I3200_REVISION "1.1"
+
+#define EDAC_MOD_STR "i3200_edac"
+
+#define PCI_DEVICE_ID_INTEL_3200_HB 0x29f0
+
+#define I3200_RANKS 8
+#define I3200_RANKS_PER_CHANNEL 4
+#define I3200_CHANNELS 2
+
+/* Intel 3200 register addresses - device 0 function 0 - DRAM Controller */
+
+#define I3200_MCHBAR_LOW 0x48 /* MCH Memory Mapped Register BAR */
+#define I3200_MCHBAR_HIGH 0x4c
+#define I3200_MCHBAR_MASK 0xfffffc000ULL /* bits 35:14 */
+#define I3200_MMR_WINDOW_SIZE 16384
+
+#define I3200_TOM 0xa0 /* Top of Memory (16b)
+ *
+ * 15:10 reserved
+ * 9:0 total populated physical memory
+ */
+#define I3200_TOM_MASK 0x3ff /* bits 9:0 */
+#define I3200_TOM_SHIFT 26 /* 64MiB grain */
+
+#define I3200_ERRSTS 0xc8 /* Error Status Register (16b)
+ *
+ * 15 reserved
+ * 14 Isochronous TBWRR Run Behind FIFO Full
+ * (ITCV)
+ * 13 Isochronous TBWRR Run Behind FIFO Put
+ * (ITSTV)
+ * 12 reserved
+ * 11 MCH Thermal Sensor Event
+ * for SMI/SCI/SERR (GTSE)
+ * 10 reserved
+ * 9 LOCK to non-DRAM Memory Flag (LCKF)
+ * 8 reserved
+ * 7 DRAM Throttle Flag (DTF)
+ * 6:2 reserved
+ * 1 Multi-bit DRAM ECC Error Flag (DMERR)
+ * 0 Single-bit DRAM ECC Error Flag (DSERR)
+ */
+#define I3200_ERRSTS_UE 0x0002
+#define I3200_ERRSTS_CE 0x0001
+#define I3200_ERRSTS_BITS (I3200_ERRSTS_UE | I3200_ERRSTS_CE)
+
+
+/* Intel MMIO register space - device 0 function 0 - MMR space */
+
+#define I3200_C0DRB 0x200 /* Channel 0 DRAM Rank Boundary (16b x 4)
+ *
+ * 15:10 reserved
+ * 9:0 Channel 0 DRAM Rank Boundary Address
+ */
+#define I3200_C1DRB 0x600 /* Channel 1 DRAM Rank Boundary (16b x 4) */
+#define I3200_DRB_MASK 0x3ff /* bits 9:0 */
+#define I3200_DRB_SHIFT 26 /* 64MiB grain */
+
+#define I3200_C0ECCERRLOG 0x280 /* Channel 0 ECC Error Log (64b)
+ *
+ * 63:48 Error Column Address (ERRCOL)
+ * 47:32 Error Row Address (ERRROW)
+ * 31:29 Error Bank Address (ERRBANK)
+ * 28:27 Error Rank Address (ERRRANK)
+ * 26:24 reserved
+ * 23:16 Error Syndrome (ERRSYND)
+ * 15: 2 reserved
+ * 1 Multiple Bit Error Status (MERRSTS)
+ * 0 Correctable Error Status (CERRSTS)
+ */
+#define I3200_C1ECCERRLOG 0x680 /* Chan 1 ECC Error Log (64b) */
+#define I3200_ECCERRLOG_CE 0x1
+#define I3200_ECCERRLOG_UE 0x2
+#define I3200_ECCERRLOG_RANK_BITS 0x18000000
+#define I3200_ECCERRLOG_RANK_SHIFT 27
+#define I3200_ECCERRLOG_SYNDROME_BITS 0xff0000
+#define I3200_ECCERRLOG_SYNDROME_SHIFT 16
+#define I3200_CAPID0 0xe0 /* P.95 of spec for details */
+
+struct i3200_priv {
+ void __iomem *window;
+};
+
+static int nr_channels;
+
+static int how_many_channels(struct pci_dev *pdev)
+{
+ unsigned char capid0_8b; /* 8th byte of CAPID0 */
+
+ pci_read_config_byte(pdev, I3200_CAPID0 + 8, &capid0_8b);
+ if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */
+ debugf0("In single channel mode.\n");
+ return 1;
+ } else {
+ debugf0("In dual channel mode.\n");
+ return 2;
+ }
+}
+
+static unsigned long eccerrlog_syndrome(u64 log)
+{
+ return (log & I3200_ECCERRLOG_SYNDROME_BITS) >>
+ I3200_ECCERRLOG_SYNDROME_SHIFT;
+}
+
+static int eccerrlog_row(int channel, u64 log)
+{
+ u64 rank = ((log & I3200_ECCERRLOG_RANK_BITS) >>
+ I3200_ECCERRLOG_RANK_SHIFT);
+ return rank | (channel * I3200_RANKS_PER_CHANNEL);
+}
+
+enum i3200_chips {
+ I3200 = 0,
+};
+
+struct i3200_dev_info {
+ const char *ctl_name;
+};
+
+struct i3200_error_info {
+ u16 errsts;
+ u16 errsts2;
+ u64 eccerrlog[I3200_CHANNELS];
+};
+
+static const struct i3200_dev_info i3200_devs[] = {
+ [I3200] = {
+ .ctl_name = "i3200"
+ },
+};
+
+static struct pci_dev *mci_pdev;
+static int i3200_registered = 1;
+
+
+static void i3200_clear_error_info(struct mem_ctl_info *mci)
+{
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(mci->dev);
+
+ /*
+ * Clear any error bits.
+ * (Yes, we really clear bits by writing 1 to them.)
+ */
+ pci_write_bits16(pdev, I3200_ERRSTS, I3200_ERRSTS_BITS,
+ I3200_ERRSTS_BITS);
+}
+
+static void i3200_get_and_clear_error_info(struct mem_ctl_info *mci,
+ struct i3200_error_info *info)
+{
+ struct pci_dev *pdev;
+ struct i3200_priv *priv = mci->pvt_info;
+ void __iomem *window = priv->window;
+
+ pdev = to_pci_dev(mci->dev);
+
+ /*
+ * This is a mess because there is no atomic way to read all the
+ * registers at once and the registers can transition from CE being
+ * overwritten by UE.
+ */
+ pci_read_config_word(pdev, I3200_ERRSTS, &info->errsts);
+ if (!(info->errsts & I3200_ERRSTS_BITS))
+ return;
+
+ info->eccerrlog[0] = readq(window + I3200_C0ECCERRLOG);
+ if (nr_channels == 2)
+ info->eccerrlog[1] = readq(window + I3200_C1ECCERRLOG);
+
+ pci_read_config_word(pdev, I3200_ERRSTS, &info->errsts2);
+
+ /*
+ * If the error is the same for both reads then the first set
+ * of reads is valid. If there is a change then there is a CE
+ * with no info and the second set of reads is valid and
+ * should be UE info.
+ */
+ if ((info->errsts ^ info->errsts2) & I3200_ERRSTS_BITS) {
+ info->eccerrlog[0] = readq(window + I3200_C0ECCERRLOG);
+ if (nr_channels == 2)
+ info->eccerrlog[1] = readq(window + I3200_C1ECCERRLOG);
+ }
+
+ i3200_clear_error_info(mci);
+}
+
+static void i3200_process_error_info(struct mem_ctl_info *mci,
+ struct i3200_error_info *info)
+{
+ int channel;
+ u64 log;
+
+ if (!(info->errsts & I3200_ERRSTS_BITS))
+ return;
+
+ if ((info->errsts ^ info->errsts2) & I3200_ERRSTS_BITS) {
+ edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
+ info->errsts = info->errsts2;
+ }
+
+ for (channel = 0; channel < nr_channels; channel++) {
+ log = info->eccerrlog[channel];
+ if (log & I3200_ECCERRLOG_UE) {
+ edac_mc_handle_ue(mci, 0, 0,
+ eccerrlog_row(channel, log),
+ "i3200 UE");
+ } else if (log & I3200_ECCERRLOG_CE) {
+ edac_mc_handle_ce(mci, 0, 0,
+ eccerrlog_syndrome(log),
+ eccerrlog_row(channel, log), 0,
+ "i3200 CE");
+ }
+ }
+}
+
+static void i3200_check(struct mem_ctl_info *mci)
+{
+ struct i3200_error_info info;
+
+ debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
+ i3200_get_and_clear_error_info(mci, &info);
+ i3200_process_error_info(mci, &info);
+}
+
+
+void __iomem *i3200_map_mchbar(struct pci_dev *pdev)
+{
+ union {
+ u64 mchbar;
+ struct {
+ u32 mchbar_low;
+ u32 mchbar_high;
+ };
+ } u;
+ void __iomem *window;
+
+ pci_read_config_dword(pdev, I3200_MCHBAR_LOW, &u.mchbar_low);
+ pci_read_config_dword(pdev, I3200_MCHBAR_HIGH, &u.mchbar_high);
+ u.mchbar &= I3200_MCHBAR_MASK;
+
+ if (u.mchbar != (resource_size_t)u.mchbar) {
+ printk(KERN_ERR
+ "i3200: mmio space beyond accessible range (0x%llx)\n",
+ (unsigned long long)u.mchbar);
+ return NULL;
+ }
+
+ window = ioremap_nocache(u.mchbar, I3200_MMR_WINDOW_SIZE);
+ if (!window)
+ printk(KERN_ERR "i3200: cannot map mmio space at 0x%llx\n",
+ (unsigned long long)u.mchbar);
+
+ return window;
+}
+
+
+static void i3200_get_drbs(void __iomem *window,
+ u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL])
+{
+ int i;
+
+ for (i = 0; i < I3200_RANKS_PER_CHANNEL; i++) {
+ drbs[0][i] = readw(window + I3200_C0DRB + 2*i) & I3200_DRB_MASK;
+ drbs[1][i] = readw(window + I3200_C1DRB + 2*i) & I3200_DRB_MASK;
+ }
+}
+
+static bool i3200_is_stacked(struct pci_dev *pdev,
+ u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL])
+{
+ u16 tom;
+
+ pci_read_config_word(pdev, I3200_TOM, &tom);
+ tom &= I3200_TOM_MASK;
+
+ return drbs[I3200_CHANNELS - 1][I3200_RANKS_PER_CHANNEL - 1] == tom;
+}
+
+static unsigned long drb_to_nr_pages(
+ u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL], bool stacked,
+ int channel, int rank)
+{
+ int n;
+
+ n = drbs[channel][rank];
+ if (rank > 0)
+ n -= drbs[channel][rank - 1];
+ if (stacked && (channel == 1) &&
+ drbs[channel][rank] == drbs[channel][I3200_RANKS_PER_CHANNEL - 1])
+ n -= drbs[0][I3200_RANKS_PER_CHANNEL - 1];
+
+ n <<= (I3200_DRB_SHIFT - PAGE_SHIFT);
+ return n;
+}
+
+static int i3200_probe1(struct pci_dev *pdev, int dev_idx)
+{
+ int rc;
+ int i;
+ struct mem_ctl_info *mci = NULL;
+ unsigned long last_page;
+ u16 drbs[I3200_CHANNELS][I3200_RANKS_PER_CHANNEL];
+ bool stacked;
+ void __iomem *window;
+ struct i3200_priv *priv;
+
+ debugf0("MC: %s()\n", __func__);
+
+ window = i3200_map_mchbar(pdev);
+ if (!window)
+ return -ENODEV;
+
+ i3200_get_drbs(window, drbs);
+ nr_channels = how_many_channels(pdev);
+
+ mci = edac_mc_alloc(sizeof(struct i3200_priv), I3200_RANKS,
+ nr_channels, 0);
+ if (!mci)
+ return -ENOMEM;
+
+ debugf3("MC: %s(): init mci\n", __func__);
+
+ mci->dev = &pdev->dev;
+ mci->mtype_cap = MEM_FLAG_DDR2;
+
+ mci->edac_ctl_cap = EDAC_FLAG_SECDED;
+ mci->edac_cap = EDAC_FLAG_SECDED;
+
+ mci->mod_name = EDAC_MOD_STR;
+ mci->mod_ver = I3200_REVISION;
+ mci->ctl_name = i3200_devs[dev_idx].ctl_name;
+ mci->dev_name = pci_name(pdev);
+ mci->edac_check = i3200_check;
+ mci->ctl_page_to_phys = NULL;
+ priv = mci->pvt_info;
+ priv->window = window;
+
+ stacked = i3200_is_stacked(pdev, drbs);
+
+ /*
+ * The dram rank boundary (DRB) reg values are boundary addresses
+ * for each DRAM rank with a granularity of 64MB. DRB regs are
+ * cumulative; the last one will contain the total memory
+ * contained in all ranks.
+ */
+ last_page = -1UL;
+ for (i = 0; i < mci->nr_csrows; i++) {
+ unsigned long nr_pages;
+ struct csrow_info *csrow = &mci->csrows[i];
+
+ nr_pages = drb_to_nr_pages(drbs, stacked,
+ i / I3200_RANKS_PER_CHANNEL,
+ i % I3200_RANKS_PER_CHANNEL);
+
+ if (nr_pages == 0) {
+ csrow->mtype = MEM_EMPTY;
+ continue;
+ }
+
+ csrow->first_page = last_page + 1;
+ last_page += nr_pages;
+ csrow->last_page = last_page;
+ csrow->nr_pages = nr_pages;
+
+ csrow->grain = nr_pages << PAGE_SHIFT;
+ csrow->mtype = MEM_DDR2;
+ csrow->dtype = DEV_UNKNOWN;
+ csrow->edac_mode = EDAC_UNKNOWN;
+ }
+
+ i3200_clear_error_info(mci);
+
+ rc = -ENODEV;
+ if (edac_mc_add_mc(mci)) {
+ debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
+ goto fail;
+ }
+
+ /* get this far and it's successful */
+ debugf3("MC: %s(): success\n", __func__);
+ return 0;
+
+fail:
+ iounmap(window);
+ if (mci)
+ edac_mc_free(mci);
+
+ return rc;
+}
+
+static int __devinit i3200_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc;
+
+ debugf0("MC: %s()\n", __func__);
+
+ if (pci_enable_device(pdev) < 0)
+ return -EIO;
+
+ rc = i3200_probe1(pdev, ent->driver_data);
+ if (!mci_pdev)
+ mci_pdev = pci_dev_get(pdev);
+
+ return rc;
+}
+
+static void __devexit i3200_remove_one(struct pci_dev *pdev)
+{
+ struct mem_ctl_info *mci;
+ struct i3200_priv *priv;
+
+ debugf0("%s()\n", __func__);
+
+ mci = edac_mc_del_mc(&pdev->dev);
+ if (!mci)
+ return;
+
+ priv = mci->pvt_info;
+ iounmap(priv->window);
+
+ edac_mc_free(mci);
+}
+
+static const struct pci_device_id i3200_pci_tbl[] __devinitdata = {
+ {
+ PCI_VEND_DEV(INTEL, 3200_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
+ I3200},
+ {
+ 0,
+ } /* 0 terminated list. */
+};
+
+MODULE_DEVICE_TABLE(pci, i3200_pci_tbl);
+
+static struct pci_driver i3200_driver = {
+ .name = EDAC_MOD_STR,
+ .probe = i3200_init_one,
+ .remove = __devexit_p(i3200_remove_one),
+ .id_table = i3200_pci_tbl,
+};
+
+static int __init i3200_init(void)
+{
+ int pci_rc;
+
+ debugf3("MC: %s()\n", __func__);
+
+ /* Ensure that the OPSTATE is set correctly for POLL or NMI */
+ opstate_init();
+
+ pci_rc = pci_register_driver(&i3200_driver);
+ if (pci_rc < 0)
+ goto fail0;
+
+ if (!mci_pdev) {
+ i3200_registered = 0;
+ mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
+ PCI_DEVICE_ID_INTEL_3200_HB, NULL);
+ if (!mci_pdev) {
+ debugf0("i3200 pci_get_device fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+
+ pci_rc = i3200_init_one(mci_pdev, i3200_pci_tbl);
+ if (pci_rc < 0) {
+ debugf0("i3200 init fail\n");
+ pci_rc = -ENODEV;
+ goto fail1;
+ }
+ }
+
+ return 0;
+
+fail1:
+ pci_unregister_driver(&i3200_driver);
+
+fail0:
+ if (mci_pdev)
+ pci_dev_put(mci_pdev);
+
+ return pci_rc;
+}
+
+static void __exit i3200_exit(void)
+{
+ debugf3("MC: %s()\n", __func__);
+
+ pci_unregister_driver(&i3200_driver);
+ if (!i3200_registered) {
+ i3200_remove_one(mci_pdev);
+ pci_dev_put(mci_pdev);
+ }
+}
+
+module_init(i3200_init);
+module_exit(i3200_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Akamai Technologies, Inc.");
+MODULE_DESCRIPTION("MC support for Intel 3200 memory hub controllers");
+
+module_param(edac_op_state, int, 0444);
+MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
pci_read_config_word(pvt->branch_1, where,
&pvt->b1_mtr[slot_row]);
debugf2("MTR%d where=0x%x B1 value=0x%x\n", slot_row,
- where, pvt->b0_mtr[slot_row]);
+ where, pvt->b1_mtr[slot_row]);
} else {
pvt->b1_mtr[slot_row] = 0;
}
struct csrow_info *p_csrow;
int empty, channel_count;
int max_csrows;
- int mtr;
+ int mtr, mtr1;
int csrow_megs;
int channel;
int csrow;
/* use branch 0 for the basis */
mtr = pvt->b0_mtr[csrow >> 1];
+ mtr1 = pvt->b1_mtr[csrow >> 1];
/* if no DIMMS on this row, continue */
- if (!MTR_DIMMS_PRESENT(mtr))
+ if (!MTR_DIMMS_PRESENT(mtr) && !MTR_DIMMS_PRESENT(mtr1))
continue;
/* FAKE OUT VALUES, FIXME */
/* Limits for i5400 */
#define NUM_MTRS_PER_BRANCH 4
#define CHANNELS_PER_BRANCH 2
+#define MAX_DIMMS_PER_CHANNEL NUM_MTRS_PER_BRANCH
#define MAX_CHANNELS 4
-#define MAX_DIMMS (MAX_CHANNELS * 4) /* Up to 4 DIMM's per channel */
-#define MAX_CSROWS (MAX_DIMMS * 2) /* max possible csrows per channel */
+/* max possible csrows per channel */
+#define MAX_CSROWS (MAX_DIMMS_PER_CHANNEL)
/* Device 16,
* Function 0: System Address
struct i5400_dimm_info {
int megabytes; /* size, 0 means not present */
- int dual_rank;
};
/* driver private data structure */
int n;
/* There is one MTR for each slot pair of FB-DIMMs,
- Each slot may have one or two ranks (2 csrows),
Each slot pair may be at branch 0 or branch 1.
- So, csrow should be divided by eight
*/
- n = csrow >> 3;
+ n = csrow;
if (n >= NUM_MTRS_PER_BRANCH) {
debugf0("ERROR: trying to access an invalid csrow: %d\n",
amb_present_reg = determine_amb_present_reg(pvt, channel);
/* Determine if there is a DIMM present in this DIMM slot */
- if (amb_present_reg & (1 << (csrow >> 1))) {
- dinfo->dual_rank = MTR_DIMM_RANK(mtr);
-
- if (!((dinfo->dual_rank == 0) &&
- ((csrow & 0x1) == 0x1))) {
- /* Start with the number of bits for a Bank
- * on the DRAM */
- addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
- /* Add thenumber of ROW bits */
- addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
- /* add the number of COLUMN bits */
- addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
-
- addrBits += 6; /* add 64 bits per DIMM */
- addrBits -= 20; /* divide by 2^^20 */
- addrBits -= 3; /* 8 bits per bytes */
-
- dinfo->megabytes = 1 << addrBits;
- }
+ if (amb_present_reg & (1 << csrow)) {
+ /* Start with the number of bits for a Bank
+ * on the DRAM */
+ addrBits = MTR_DRAM_BANKS_ADDR_BITS(mtr);
+ /* Add thenumber of ROW bits */
+ addrBits += MTR_DIMM_ROWS_ADDR_BITS(mtr);
+ /* add the number of COLUMN bits */
+ addrBits += MTR_DIMM_COLS_ADDR_BITS(mtr);
+ /* add the number of RANK bits */
+ addrBits += MTR_DIMM_RANK(mtr);
+
+ addrBits += 6; /* add 64 bits per DIMM */
+ addrBits -= 20; /* divide by 2^^20 */
+ addrBits -= 3; /* 8 bits per bytes */
+
+ dinfo->megabytes = 1 << addrBits;
}
}
}
return;
}
- /* Scan all the actual CSROWS (which is # of DIMMS * 2)
+ /* Scan all the actual CSROWS
* and calculate the information for each DIMM
* Start with the highest csrow first, to display it first
* and work toward the 0th csrow
*/
- max_csrows = pvt->maxdimmperch * 2;
+ max_csrows = pvt->maxdimmperch;
for (csrow = max_csrows - 1; csrow >= 0; csrow--) {
/* on an odd csrow, first output a 'boundary' marker,
/* Get the set of MTR[0-3] regs by each branch */
for (slot_row = 0; slot_row < NUM_MTRS_PER_BRANCH; slot_row++) {
- int where = MTR0 + (slot_row * sizeof(u32));
+ int where = MTR0 + (slot_row * sizeof(u16));
/* Branch 0 set of MTR registers */
pci_read_config_word(pvt->branch_0, where,
pvt = mci->pvt_info;
channel_count = pvt->maxch;
- max_csrows = pvt->maxdimmperch * 2;
+ max_csrows = pvt->maxdimmperch;
empty = 1; /* Assume NO memory */
fbd_error_mask);
}
-/*
- * i5400_get_dimm_and_channel_counts(pdev, &num_csrows, &num_channels)
- *
- * ask the device how many channels are present and how many CSROWS
- * as well
- */
-static void i5400_get_dimm_and_channel_counts(struct pci_dev *pdev,
- int *num_dimms_per_channel,
- int *num_channels)
-{
- u8 value;
-
- /* Need to retrieve just how many channels and dimms per channel are
- * supported on this memory controller
- */
- pci_read_config_byte(pdev, MAXDIMMPERCH, &value);
- *num_dimms_per_channel = (int)value * 2;
-
- pci_read_config_byte(pdev, MAXCH, &value);
- *num_channels = (int)value;
-}
-
/*
* i5400_probe1 Probe for ONE instance of device to see if it is
* present.
if (PCI_FUNC(pdev->devfn) != 0)
return -ENODEV;
- /* Ask the devices for the number of CSROWS and CHANNELS so
- * that we can calculate the memory resources, etc
- *
- * The Chipset will report what it can handle which will be greater
- * or equal to what the motherboard manufacturer will implement.
- *
- * As we don't have a motherboard identification routine to determine
+ /* As we don't have a motherboard identification routine to determine
* actual number of slots/dimms per channel, we thus utilize the
* resource as specified by the chipset. Thus, we might have
* have more DIMMs per channel than actually on the mobo, but this
* allows the driver to support upto the chipset max, without
* some fancy mobo determination.
*/
- i5400_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
- &num_channels);
- num_csrows = num_dimms_per_channel * 2;
+ num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL;
+ num_channels = MAX_CHANNELS;
+ num_csrows = num_dimms_per_channel;
debugf0("MC: %s(): Number of - Channels= %d DIMMS= %d CSROWS= %d\n",
__func__, num_channels, num_dimms_per_channel, num_csrows);
#include "mpc85xx_edac.h"
static int edac_dev_idx;
+#ifdef CONFIG_PCI
static int edac_pci_idx;
+#endif
static int edac_mc_idx;
static u32 orig_ddr_err_disable;
#endif
static u32 orig_l2_err_disable;
+#ifdef CONFIG_MPC85xx
static u32 orig_hid1[2];
+#endif
/************************ MC SYSFS parts ***********************************/
{ .compatible = "fsl,mpc8560-l2-cache-controller", },
{ .compatible = "fsl,mpc8568-l2-cache-controller", },
{ .compatible = "fsl,mpc8572-l2-cache-controller", },
+ { .compatible = "fsl,p2020-l2-cache-controller", },
{},
};
csrow = &mci->csrows[index];
cs_bnds = in_be32(pdata->mc_vbase + MPC85XX_MC_CS_BNDS_0 +
(index * MPC85XX_MC_CS_BNDS_OFS));
- start = (cs_bnds & 0xfff0000) << 4;
- end = ((cs_bnds & 0xfff) << 20);
- if (start)
- start |= 0xfffff;
- if (end)
- end |= 0xfffff;
+
+ start = (cs_bnds & 0xffff0000) >> 16;
+ end = (cs_bnds & 0x0000ffff);
if (start == end)
continue; /* not populated */
+ start <<= (24 - PAGE_SHIFT);
+ end <<= (24 - PAGE_SHIFT);
+ end |= (1 << (24 - PAGE_SHIFT)) - 1;
+
csrow->first_page = start >> PAGE_SHIFT;
csrow->last_page = end >> PAGE_SHIFT;
- csrow->nr_pages = csrow->last_page + 1 - csrow->first_page;
+ csrow->nr_pages = end + 1 - start;
csrow->grain = 8;
csrow->mtype = mtype;
csrow->dtype = DEV_UNKNOWN;
{ .compatible = "fsl,mpc8560-memory-controller", },
{ .compatible = "fsl,mpc8568-memory-controller", },
{ .compatible = "fsl,mpc8572-memory-controller", },
+ { .compatible = "fsl,mpc8349-memory-controller", },
+ { .compatible = "fsl,p2020-memory-controller", },
{},
};
},
};
-
+#ifdef CONFIG_MPC85xx
static void __init mpc85xx_mc_clear_rfxe(void *data)
{
orig_hid1[smp_processor_id()] = mfspr(SPRN_HID1);
mtspr(SPRN_HID1, (orig_hid1[smp_processor_id()] & ~0x20000));
}
-
+#endif
static int __init mpc85xx_mc_init(void)
{
printk(KERN_WARNING EDAC_MOD_STR "PCI fails to register\n");
#endif
+#ifdef CONFIG_MPC85xx
/*
* need to clear HID1[RFXE] to disable machine check int
* so we can catch it
*/
if (edac_op_state == EDAC_OPSTATE_INT)
on_each_cpu(mpc85xx_mc_clear_rfxe, NULL, 0);
+#endif
return 0;
}
module_init(mpc85xx_mc_init);
+#ifdef CONFIG_MPC85xx
static void __exit mpc85xx_mc_restore_hid1(void *data)
{
mtspr(SPRN_HID1, orig_hid1[smp_processor_id()]);
}
+#endif
static void __exit mpc85xx_mc_exit(void)
{
+#ifdef CONFIG_MPC85xx
on_each_cpu(mpc85xx_mc_restore_hid1, NULL, 0);
+#endif
#ifdef CONFIG_PCI
of_unregister_platform_driver(&mpc85xx_pci_err_driver);
#endif
return -ENOENT;
}
- pci_serr = ioremap(r->start, r->end - r->start + 1);
+ pci_serr = ioremap(r->start, resource_size(r));
if (!pci_serr)
return -ENOMEM;
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
pdata->pci_vbase = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->pci_vbase) {
printk(KERN_ERR "%s: Unable to setup PCI err regs\n", __func__);
res = -ENOMEM;
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while request mem region\n",
__func__);
pdata->sram_vbase = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->sram_vbase) {
printk(KERN_ERR "%s: Unable to setup SRAM err regs\n",
__func__);
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
pdata->cpu_vbase[0] = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->cpu_vbase[0]) {
printk(KERN_ERR "%s: Unable to setup CPU err regs\n", __func__);
res = -ENOMEM;
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
pdata->cpu_vbase[1] = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->cpu_vbase[1]) {
printk(KERN_ERR "%s: Unable to setup CPU err regs\n", __func__);
res = -ENOMEM;
if (!devm_request_mem_region(&pdev->dev,
r->start,
- r->end - r->start + 1,
+ resource_size(r),
pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
pdata->mc_vbase = devm_ioremap(&pdev->dev,
r->start,
- r->end - r->start + 1);
+ resource_size(r));
if (!pdata->mc_vbase) {
printk(KERN_ERR "%s: Unable to setup MC err regs\n", __func__);
res = -ENOMEM;
#include <linux/mutex.h>
#include <linux/poll.h>
#include <linux/preempt.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/time.h>
#include <linux/uaccess.h>
/* Impossible login_id, to detect logout attempt before successful login */
#define INVALID_LOGIN_ID 0x10000
-/*
- * Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be
- * provided in the config rom. Most devices do provide a value, which
- * we'll use for login management orbs, but with some sane limits.
- */
-#define SBP2_MIN_LOGIN_ORB_TIMEOUT 5000U /* Timeout in ms */
-#define SBP2_MAX_LOGIN_ORB_TIMEOUT 40000U /* Timeout in ms */
-#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */
+#define SBP2_ORB_TIMEOUT 2000U /* Timeout in ms */
#define SBP2_ORB_NULL 0x80000000
#define SBP2_RETRY_LIMIT 0xf /* 15 retries */
#define SBP2_CYCLE_LIMIT (0xc8 << 12) /* 200 125us cycles */
{
struct fw_csr_iterator ci;
int key, value;
- unsigned int timeout;
fw_csr_iterator_init(&ci, directory);
while (fw_csr_iterator_next(&ci, &key, &value)) {
case SBP2_CSR_UNIT_CHARACTERISTICS:
/* the timeout value is stored in 500ms units */
- timeout = ((unsigned int) value >> 8 & 0xff) * 500;
- timeout = max(timeout, SBP2_MIN_LOGIN_ORB_TIMEOUT);
- tgt->mgt_orb_timeout =
- min(timeout, SBP2_MAX_LOGIN_ORB_TIMEOUT);
-
- if (timeout > tgt->mgt_orb_timeout)
- fw_notify("%s: config rom contains %ds "
- "management ORB timeout, limiting "
- "to %ds\n", tgt->bus_id,
- timeout / 1000,
- tgt->mgt_orb_timeout / 1000);
+ tgt->mgt_orb_timeout = (value >> 8 & 0xff) * 500;
break;
case SBP2_CSR_LOGICAL_UNIT_NUMBER:
return 0;
}
+/*
+ * Per section 7.4.8 of the SBP-2 spec, a mgt_ORB_timeout value can be
+ * provided in the config rom. Most devices do provide a value, which
+ * we'll use for login management orbs, but with some sane limits.
+ */
+static void sbp2_clamp_management_orb_timeout(struct sbp2_target *tgt)
+{
+ unsigned int timeout = tgt->mgt_orb_timeout;
+
+ if (timeout > 40000)
+ fw_notify("%s: %ds mgt_ORB_timeout limited to 40s\n",
+ tgt->bus_id, timeout / 1000);
+
+ tgt->mgt_orb_timeout = clamp_val(timeout, 5000, 40000);
+}
+
static void sbp2_init_workarounds(struct sbp2_target *tgt, u32 model,
u32 firmware_revision)
{
&firmware_revision) < 0)
goto fail_tgt_put;
+ sbp2_clamp_management_orb_timeout(tgt);
sbp2_init_workarounds(tgt, model, firmware_revision);
/*
if (ibft_addr) {
printk(KERN_INFO "iBFT detected at 0x%llx.\n",
- (u64)virt_to_phys((void *)ibft_addr));
+ (u64)isa_virt_to_bus(ibft_addr));
rc = ibft_check_device();
if (rc)
* so skip that area */
if (pos == VGA_MEM)
pos += VGA_SIZE;
- virt = phys_to_virt(pos);
+ virt = isa_bus_to_virt(pos);
if (memcmp(virt, IBFT_SIGN, IBFT_SIGN_LEN) == 0) {
unsigned long *addr =
- (unsigned long *)phys_to_virt(pos + 4);
+ (unsigned long *)isa_bus_to_virt(pos + 4);
len = *addr;
/* if the length of the table extends past 1M,
* the table cannot be valid. */
return single_open(file, gpiolib_show, NULL);
}
-static struct file_operations gpiolib_operations = {
+static const struct file_operations gpiolib_operations = {
.open = gpiolib_open,
.read = seq_read,
.llseek = seq_lseek,
return ret;
}
-static int __devexit gpio_twl4030_remove(struct platform_device *pdev)
+/* Cannot use __devexit as gpio_twl4030_probe() calls us */
+static int gpio_twl4030_remove(struct platform_device *pdev)
{
struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data;
int status;
.driver.name = "twl4030_gpio",
.driver.owner = THIS_MODULE,
.probe = gpio_twl4030_probe,
- .remove = __devexit_p(gpio_twl4030_remove),
+ .remove = gpio_twl4030_remove,
};
static int __init gpio_twl4030_init(void)
select BACKLIGHT_CLASS_DEVICE if ACPI
select INPUT if ACPI
select ACPI_VIDEO if ACPI
+ select ACPI_BUTTON if ACPI
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
list_for_each_entry_safe(mode, t, &connector->user_modes, head)
drm_mode_remove(connector, mode);
+ kfree(connector->fb_helper_private);
mutex_lock(&dev->mode_config.mutex);
drm_mode_object_put(dev, &connector->base);
list_del(&connector->head);
struct drm_crtc *crtc;
int ret = 0;
- DRM_DEBUG_KMS("\n");
-
if (!req->flags) {
DRM_ERROR("no operation set\n");
return -EINVAL;
#include "drmP.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
static void drm_mode_validate_flag(struct drm_connector *connector,
int flags)
list_for_each_entry_safe(mode, t, &connector->modes, head)
mode->status = MODE_UNVERIFIED;
- connector->status = connector->funcs->detect(connector);
+ if (connector->force) {
+ if (connector->force == DRM_FORCE_ON)
+ connector->status = connector_status_connected;
+ else
+ connector->status = connector_status_disconnected;
+ if (connector->funcs->force)
+ connector->funcs->force(connector);
+ } else
+ connector->status = connector->funcs->detect(connector);
if (connector->status == connector_status_disconnected) {
DRM_DEBUG_KMS("%s is disconnected\n",
return NULL;
}
+static bool drm_has_cmdline_mode(struct drm_connector *connector)
+{
+ struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+ struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+ if (!fb_help_conn)
+ return false;
+
+ cmdline_mode = &fb_help_conn->cmdline_mode;
+ return cmdline_mode->specified;
+}
+
+static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_connector *connector, int width, int height)
+{
+ struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+ struct drm_fb_helper_cmdline_mode *cmdline_mode;
+ struct drm_display_mode *mode = NULL;
+
+ if (!fb_help_conn)
+ return mode;
+
+ cmdline_mode = &fb_help_conn->cmdline_mode;
+ if (cmdline_mode->specified == false)
+ return mode;
+
+ /* attempt to find a matching mode in the list of modes
+ * we have gotten so far, if not add a CVT mode that conforms
+ */
+ if (cmdline_mode->rb || cmdline_mode->margins)
+ goto create_mode;
+
+ list_for_each_entry(mode, &connector->modes, head) {
+ /* check width/height */
+ if (mode->hdisplay != cmdline_mode->xres ||
+ mode->vdisplay != cmdline_mode->yres)
+ continue;
+
+ if (cmdline_mode->refresh_specified) {
+ if (mode->vrefresh != cmdline_mode->refresh)
+ continue;
+ }
+
+ if (cmdline_mode->interlace) {
+ if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
+ continue;
+ }
+ return mode;
+ }
+
+create_mode:
+ mode = drm_cvt_mode(connector->dev, cmdline_mode->xres,
+ cmdline_mode->yres,
+ cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+ cmdline_mode->rb, cmdline_mode->interlace,
+ cmdline_mode->margins);
+ list_add(&mode->head, &connector->modes);
+ return mode;
+}
+
static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
{
bool enable;
continue;
}
- DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
- connector->base.id);
+ DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
+ connector->base.id);
- modes[i] = drm_has_preferred_mode(connector, width, height);
+ /* got for command line mode first */
+ modes[i] = drm_pick_cmdline_mode(connector, width, height);
+ if (!modes[i]) {
+ DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
+ connector->base.id);
+ modes[i] = drm_has_preferred_mode(connector, width, height);
+ }
/* No preferred modes, pick one off the list */
if (!modes[i] && !list_empty(&connector->modes)) {
list_for_each_entry(modes[i], &connector->modes, head)
my_score = 1;
if (connector->status == connector_status_connected)
my_score++;
+ if (drm_has_cmdline_mode(connector))
+ my_score++;
if (drm_has_preferred_mode(connector, width, height))
my_score++;
{
int count = 0;
+ drm_fb_helper_parse_command_line(dev);
+
count = drm_helper_probe_connector_modes(dev,
dev->mode_config.max_width,
dev->mode_config.max_height);
/*
* we shouldn't end up with no modes here.
*/
- WARN(!count, "Connected connector with 0 modes\n");
+ WARN(!count, "No connectors reported connected with modes\n");
drm_setup_crtcs(dev);
/* Valid EDID header has these bytes */
-static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
+static const u8 edid_header[] = {
+ 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
+};
/**
* edid_is_valid - sanity check EDID data
}
return mode;
}
+
+/*
+ * 0 is reserved. The spec says 0x01 fill for unused timings. Some old
+ * monitors fill with ascii space (0x20) instead.
+ */
+static int
+bad_std_timing(u8 a, u8 b)
+{
+ return (a == 0x00 && b == 0x00) ||
+ (a == 0x01 && b == 0x01) ||
+ (a == 0x20 && b == 0x20);
+}
+
/**
* drm_mode_std - convert standard mode info (width, height, refresh) into mode
* @t: standard timing params
*/
struct drm_display_mode *drm_mode_std(struct drm_device *dev,
struct std_timing *t,
+ int revision,
int timing_level)
{
struct drm_display_mode *mode;
unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
>> EDID_TIMING_VFREQ_SHIFT;
+ if (bad_std_timing(t->hsize, t->vfreq_aspect))
+ return NULL;
+
/* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
hsize = t->hsize * 8 + 248;
/* vrefresh_rate = vfreq + 60 */
vrefresh_rate = vfreq + 60;
/* the vdisplay is calculated based on the aspect ratio */
- if (aspect_ratio == 0)
- vsize = (hsize * 10) / 16;
- else if (aspect_ratio == 1)
+ if (aspect_ratio == 0) {
+ if (revision < 3)
+ vsize = hsize;
+ else
+ vsize = (hsize * 10) / 16;
+ } else if (aspect_ratio == 1)
vsize = (hsize * 3) / 4;
else if (aspect_ratio == 2)
vsize = (hsize * 4) / 5;
vsize = (hsize * 9) / 16;
/* HDTV hack */
if (hsize == 1360 && vsize == 765 && vrefresh_rate == 60) {
- mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+ mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+ false);
mode->hdisplay = 1366;
mode->vsync_start = mode->vsync_start - 1;
mode->vsync_end = mode->vsync_end - 1;
mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
break;
case LEVEL_CVT:
- mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+ mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+ false);
break;
}
return mode;
return NULL;
}
+ /* it is incorrect if hsync/vsync width is zero */
+ if (!hsync_pulse_width || !vsync_pulse_width) {
+ DRM_DEBUG_KMS("Incorrect Detailed timing. "
+ "Wrong Hsync/Vsync pulse width\n");
+ return NULL;
+ }
mode = drm_mode_create(dev);
if (!mode)
return NULL;
mode->vsync_end = mode->vsync_start + vsync_pulse_width;
mode->vtotal = mode->vdisplay + vblank;
+ /* perform the basic check for the detailed timing */
+ if (mode->hsync_end > mode->htotal ||
+ mode->vsync_end > mode->vtotal) {
+ drm_mode_destroy(dev, mode);
+ DRM_DEBUG_KMS("Incorrect detailed timing. "
+ "Sync is beyond the blank.\n");
+ return NULL;
+ }
+
drm_mode_set_name(mode);
if (pt->misc & DRM_EDID_PT_INTERLACED)
continue;
newmode = drm_mode_std(dev, &edid->standard_timings[i],
- timing_level);
+ edid->revision, timing_level);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
case EDID_DETAIL_MONITOR_CPDATA:
break;
case EDID_DETAIL_STD_MODES:
- /* Five modes per detailed section */
- for (j = 0; j < 5; i++) {
+ for (j = 0; j < 6; i++) {
struct std_timing *std;
struct drm_display_mode *newmode;
std = &data->data.timings[j];
newmode = drm_mode_std(dev, std,
+ edid->revision,
timing_level);
if (newmode) {
drm_mode_probed_add(connector, newmode);
struct drm_display_mode *newmode;
std = &data->data.timings[j];
- newmode = drm_mode_std(dev, std, timing_level);
+ newmode = drm_mode_std(dev, std,
+ edid->revision,
+ timing_level);
if (newmode) {
drm_mode_probed_add(connector, newmode);
modes++;
static LIST_HEAD(kernel_fb_helper_list);
+int drm_fb_helper_add_connector(struct drm_connector *connector)
+{
+ connector->fb_helper_private = kzalloc(sizeof(struct drm_fb_helper_connector), GFP_KERNEL);
+ if (!connector->fb_helper_private)
+ return -ENOMEM;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_fb_helper_add_connector);
+
+static int my_atoi(const char *name)
+{
+ int val = 0;
+
+ for (;; name++) {
+ switch (*name) {
+ case '0' ... '9':
+ val = 10*val+(*name-'0');
+ break;
+ default:
+ return val;
+ }
+ }
+}
+
+/**
+ * drm_fb_helper_connector_parse_command_line - parse command line for connector
+ * @connector - connector to parse line for
+ * @mode_option - per connector mode option
+ *
+ * This parses the connector specific then generic command lines for
+ * modes and options to configure the connector.
+ *
+ * This uses the same parameters as the fb modedb.c, except for extra
+ * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+ *
+ * enable/enable Digital/disable bit at the end
+ */
+static bool drm_fb_helper_connector_parse_command_line(struct drm_connector *connector,
+ const char *mode_option)
+{
+ const char *name;
+ unsigned int namelen;
+ int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
+ unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0;
+ int yres_specified = 0, cvt = 0, rb = 0, interlace = 0, margins = 0;
+ int i;
+ enum drm_connector_force force = DRM_FORCE_UNSPECIFIED;
+ struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+ struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+ if (!fb_help_conn)
+ return false;
+
+ cmdline_mode = &fb_help_conn->cmdline_mode;
+ if (!mode_option)
+ mode_option = fb_mode_option;
+
+ if (!mode_option) {
+ cmdline_mode->specified = false;
+ return false;
+ }
+
+ name = mode_option;
+ namelen = strlen(name);
+ for (i = namelen-1; i >= 0; i--) {
+ switch (name[i]) {
+ case '@':
+ namelen = i;
+ if (!refresh_specified && !bpp_specified &&
+ !yres_specified) {
+ refresh = my_atoi(&name[i+1]);
+ refresh_specified = 1;
+ if (cvt || rb)
+ cvt = 0;
+ } else
+ goto done;
+ break;
+ case '-':
+ namelen = i;
+ if (!bpp_specified && !yres_specified) {
+ bpp = my_atoi(&name[i+1]);
+ bpp_specified = 1;
+ if (cvt || rb)
+ cvt = 0;
+ } else
+ goto done;
+ break;
+ case 'x':
+ if (!yres_specified) {
+ yres = my_atoi(&name[i+1]);
+ yres_specified = 1;
+ } else
+ goto done;
+ case '0' ... '9':
+ break;
+ case 'M':
+ if (!yres_specified)
+ cvt = 1;
+ break;
+ case 'R':
+ if (!cvt)
+ rb = 1;
+ break;
+ case 'm':
+ if (!cvt)
+ margins = 1;
+ break;
+ case 'i':
+ if (!cvt)
+ interlace = 1;
+ break;
+ case 'e':
+ force = DRM_FORCE_ON;
+ break;
+ case 'D':
+ if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) ||
+ (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB))
+ force = DRM_FORCE_ON;
+ else
+ force = DRM_FORCE_ON_DIGITAL;
+ break;
+ case 'd':
+ force = DRM_FORCE_OFF;
+ break;
+ default:
+ goto done;
+ }
+ }
+ if (i < 0 && yres_specified) {
+ xres = my_atoi(name);
+ res_specified = 1;
+ }
+done:
+
+ DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+ drm_get_connector_name(connector), xres, yres,
+ (refresh) ? refresh : 60, (rb) ? " reduced blanking" :
+ "", (margins) ? " with margins" : "", (interlace) ?
+ " interlaced" : "");
+
+ if (force) {
+ const char *s;
+ switch (force) {
+ case DRM_FORCE_OFF: s = "OFF"; break;
+ case DRM_FORCE_ON_DIGITAL: s = "ON - dig"; break;
+ default:
+ case DRM_FORCE_ON: s = "ON"; break;
+ }
+
+ DRM_INFO("forcing %s connector %s\n",
+ drm_get_connector_name(connector), s);
+ connector->force = force;
+ }
+
+ if (res_specified) {
+ cmdline_mode->specified = true;
+ cmdline_mode->xres = xres;
+ cmdline_mode->yres = yres;
+ }
+
+ if (refresh_specified) {
+ cmdline_mode->refresh_specified = true;
+ cmdline_mode->refresh = refresh;
+ }
+
+ if (bpp_specified) {
+ cmdline_mode->bpp_specified = true;
+ cmdline_mode->bpp = bpp;
+ }
+ cmdline_mode->rb = rb ? true : false;
+ cmdline_mode->cvt = cvt ? true : false;
+ cmdline_mode->interlace = interlace ? true : false;
+
+ return true;
+}
+
+int drm_fb_helper_parse_command_line(struct drm_device *dev)
+{
+ struct drm_connector *connector;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ char *option = NULL;
+
+ /* do something on return - turn off connector maybe */
+ if (fb_get_options(drm_get_connector_name(connector), &option))
+ continue;
+
+ drm_fb_helper_connector_parse_command_line(connector, option);
+ }
+ return 0;
+}
+
bool drm_fb_helper_force_kernel_mode(void)
{
int i = 0;
}
EXPORT_SYMBOL(drm_fb_helper_restore);
+#ifdef CONFIG_MAGIC_SYSRQ
static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
{
drm_fb_helper_restore();
.help_msg = "force-fb(V)",
.action_msg = "Restore framebuffer console",
};
+#endif
static void drm_fb_helper_on(struct fb_info *info)
{
}
EXPORT_SYMBOL(drm_fb_helper_init_crtc_count);
+static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
+ u16 blue, u16 regno, struct fb_info *info)
+{
+ struct drm_fb_helper *fb_helper = info->par;
+ struct drm_framebuffer *fb = fb_helper->fb;
+ int pindex;
+
+ if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
+ u32 *palette;
+ u32 value;
+ /* place color in psuedopalette */
+ if (regno > 16)
+ return -EINVAL;
+ palette = (u32 *)info->pseudo_palette;
+ red >>= (16 - info->var.red.length);
+ green >>= (16 - info->var.green.length);
+ blue >>= (16 - info->var.blue.length);
+ value = (red << info->var.red.offset) |
+ (green << info->var.green.offset) |
+ (blue << info->var.blue.offset);
+ palette[regno] = value;
+ return 0;
+ }
+
+ pindex = regno;
+
+ if (fb->bits_per_pixel == 16) {
+ pindex = regno << 3;
+
+ if (fb->depth == 16 && regno > 63)
+ return -EINVAL;
+ if (fb->depth == 15 && regno > 31)
+ return -EINVAL;
+
+ if (fb->depth == 16) {
+ u16 r, g, b;
+ int i;
+ if (regno < 32) {
+ for (i = 0; i < 8; i++)
+ fb_helper->funcs->gamma_set(crtc, red,
+ green, blue, pindex + i);
+ }
+
+ fb_helper->funcs->gamma_get(crtc, &r,
+ &g, &b,
+ pindex >> 1);
+
+ for (i = 0; i < 4; i++)
+ fb_helper->funcs->gamma_set(crtc, r,
+ green, b,
+ (pindex >> 1) + i);
+ }
+ }
+
+ if (fb->depth != 16)
+ fb_helper->funcs->gamma_set(crtc, red, green, blue, pindex);
+ return 0;
+}
+
+int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
+{
+ struct drm_fb_helper *fb_helper = info->par;
+ struct drm_device *dev = fb_helper->dev;
+ u16 *red, *green, *blue, *transp;
+ struct drm_crtc *crtc;
+ int i, rc = 0;
+ int start;
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ for (i = 0; i < fb_helper->crtc_count; i++) {
+ if (crtc->base.id == fb_helper->crtc_info[i].crtc_id)
+ break;
+ }
+ if (i == fb_helper->crtc_count)
+ continue;
+
+ red = cmap->red;
+ green = cmap->green;
+ blue = cmap->blue;
+ transp = cmap->transp;
+ start = cmap->start;
+
+ for (i = 0; i < cmap->len; i++) {
+ u16 hred, hgreen, hblue, htransp = 0xffff;
+
+ hred = *red++;
+ hgreen = *green++;
+ hblue = *blue++;
+
+ if (transp)
+ htransp = *transp++;
+
+ rc = setcolreg(crtc, hred, hgreen, hblue, start++, info);
+ if (rc)
+ return rc;
+ }
+ crtc_funcs->load_lut(crtc);
+ }
+ return rc;
+}
+EXPORT_SYMBOL(drm_fb_helper_setcmap);
+
int drm_fb_helper_setcolreg(unsigned regno,
unsigned red,
unsigned green,
struct drm_device *dev = fb_helper->dev;
struct drm_crtc *crtc;
int i;
+ int ret;
- list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
- struct drm_framebuffer *fb = fb_helper->fb;
+ if (regno > 255)
+ return 1;
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
for (i = 0; i < fb_helper->crtc_count; i++) {
if (crtc->base.id == fb_helper->crtc_info[i].crtc_id)
break;
if (i == fb_helper->crtc_count)
continue;
- if (regno > 255)
- return 1;
-
- if (fb->depth == 8) {
- fb_helper->funcs->gamma_set(crtc, red, green, blue, regno);
- return 0;
- }
+ ret = setcolreg(crtc, red, green, blue, regno, info);
+ if (ret)
+ return ret;
- if (regno < 16) {
- switch (fb->depth) {
- case 15:
- fb->pseudo_palette[regno] = ((red & 0xf800) >> 1) |
- ((green & 0xf800) >> 6) |
- ((blue & 0xf800) >> 11);
- break;
- case 16:
- fb->pseudo_palette[regno] = (red & 0xf800) |
- ((green & 0xfc00) >> 5) |
- ((blue & 0xf800) >> 11);
- break;
- case 24:
- case 32:
- fb->pseudo_palette[regno] =
- (((red >> 8) & 0xff) << info->var.red.offset) |
- (((green >> 8) & 0xff) << info->var.green.offset) |
- (((blue >> 8) & 0xff) << info->var.blue.offset);
- break;
- }
- }
+ crtc_funcs->load_lut(crtc);
}
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_pan_display);
int drm_fb_helper_single_fb_probe(struct drm_device *dev,
+ int preferred_bpp,
int (*fb_create)(struct drm_device *dev,
uint32_t fb_width,
uint32_t fb_height,
uint32_t surface_width,
uint32_t surface_height,
+ uint32_t surface_depth,
+ uint32_t surface_bpp,
struct drm_framebuffer **fb_ptr))
{
struct drm_crtc *crtc;
struct drm_framebuffer *fb;
struct drm_mode_set *modeset = NULL;
struct drm_fb_helper *fb_helper;
+ uint32_t surface_depth = 24, surface_bpp = 32;
+ /* if driver picks 8 or 16 by default use that
+ for both depth/bpp */
+ if (preferred_bpp != surface_bpp) {
+ surface_depth = surface_bpp = preferred_bpp;
+ }
/* first up get a count of crtcs now in use and new min/maxes width/heights */
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+
+ struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+ if (!fb_help_conn)
+ continue;
+
+ cmdline_mode = &fb_help_conn->cmdline_mode;
+
+ if (cmdline_mode->bpp_specified) {
+ switch (cmdline_mode->bpp) {
+ case 8:
+ surface_depth = surface_bpp = 8;
+ break;
+ case 15:
+ surface_depth = 15;
+ surface_bpp = 16;
+ break;
+ case 16:
+ surface_depth = surface_bpp = 16;
+ break;
+ case 24:
+ surface_depth = surface_bpp = 24;
+ break;
+ case 32:
+ surface_depth = 24;
+ surface_bpp = 32;
+ break;
+ }
+ break;
+ }
+ }
+
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
if (drm_helper_crtc_in_use(crtc)) {
if (crtc->desired_mode) {
/* do we have an fb already? */
if (list_empty(&dev->mode_config.fb_kernel_list)) {
ret = (*fb_create)(dev, fb_width, fb_height, surface_width,
- surface_height, &fb);
+ surface_height, surface_depth, surface_bpp,
+ &fb);
if (ret)
return -EINVAL;
new_fb = 1;
}
EXPORT_SYMBOL(drm_fb_helper_free);
-void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch)
+void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
+ uint32_t depth)
{
info->fix.type = FB_TYPE_PACKED_PIXELS;
- info->fix.visual = FB_VISUAL_TRUECOLOR;
+ info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR :
+ FB_VISUAL_TRUECOLOR;
info->fix.type_aux = 0;
info->fix.xpanstep = 1; /* doing it in hw */
info->fix.ypanstep = 1; /* doing it in hw */
if (IS_ERR(obj->filp))
goto free;
+ /* Basically we want to disable the OOM killer and handle ENOMEM
+ * ourselves by sacrificing pages from cached buffers.
+ * XXX shmem_file_[gs]et_gfp_mask()
+ */
+ mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping,
+ GFP_HIGHUSER |
+ __GFP_COLD |
+ __GFP_FS |
+ __GFP_RECLAIMABLE |
+ __GFP_NORETRY |
+ __GFP_NOWARN |
+ __GFP_NOMEMALLOC);
+
kref_init(&obj->refcount);
kref_init(&obj->handlecount);
obj->size = size;
#define HV_FACTOR 1000
struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
int vdisplay, int vrefresh,
- bool reduced, bool interlaced)
+ bool reduced, bool interlaced, bool margins)
{
/* 1) top/bottom margin size (% of height) - default: 1.8, */
#define CVT_MARGIN_PERCENTAGE 18
/* Pixel Clock step (kHz) */
#define CVT_CLOCK_STEP 250
struct drm_display_mode *drm_mode;
- bool margins = false;
unsigned int vfieldrate, hperiod;
int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync;
int interlace;
}
/** AGP virtual memory operations */
-static struct vm_operations_struct drm_vm_ops = {
+static const struct vm_operations_struct drm_vm_ops = {
.fault = drm_vm_fault,
.open = drm_vm_open,
.close = drm_vm_close,
};
/** Shared virtual memory operations */
-static struct vm_operations_struct drm_vm_shm_ops = {
+static const struct vm_operations_struct drm_vm_shm_ops = {
.fault = drm_vm_shm_fault,
.open = drm_vm_open,
.close = drm_vm_shm_close,
};
/** DMA virtual memory operations */
-static struct vm_operations_struct drm_vm_dma_ops = {
+static const struct vm_operations_struct drm_vm_dma_ops = {
.fault = drm_vm_dma_fault,
.open = drm_vm_open,
.close = drm_vm_close,
};
/** Scatter-gather virtual memory operations */
-static struct vm_operations_struct drm_vm_sg_ops = {
+static const struct vm_operations_struct drm_vm_sg_ops = {
.fault = drm_vm_sg_fault,
.open = drm_vm_open,
.close = drm_vm_close,
i915_gem.o \
i915_gem_debug.o \
i915_gem_tiling.o \
+ i915_trace_points.o \
intel_display.o \
intel_crt.o \
intel_lvds.o \
{
struct drm_gem_object *obj = obj_priv->obj;
- seq_printf(m, " %p: %s %08x %08x %d",
+ seq_printf(m, " %p: %s %8zd %08x %08x %d %s",
obj,
get_pin_flag(obj_priv),
+ obj->size,
obj->read_domains, obj->write_domain,
- obj_priv->last_rendering_seqno);
+ obj_priv->last_rendering_seqno,
+ obj_priv->dirty ? "dirty" : "");
if (obj->name)
seq_printf(m, " (name: %d)", obj->name);
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "i915_trace.h"
#include <linux/vgaarb.h>
/* Really want an OS-independent resettable timer. Would like to have
u32 last_head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
int i;
+ trace_i915_ring_wait_begin (dev);
+
for (i = 0; i < 100000; i++) {
ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
acthd = I915_READ(acthd_reg);
ring->space = ring->head - (ring->tail + 8);
if (ring->space < 0)
ring->space += ring->Size;
- if (ring->space >= n)
+ if (ring->space >= n) {
+ trace_i915_ring_wait_end (dev);
return 0;
+ }
if (dev->primary->master) {
struct drm_i915_master_private *master_priv = dev->primary->master->driver_priv;
}
+ trace_i915_ring_wait_end (dev);
return -EBUSY;
}
* how much was set aside so we can use it for our own purposes.
*/
static int i915_probe_agp(struct drm_device *dev, uint32_t *aperture_size,
- uint32_t *preallocated_size)
+ uint32_t *preallocated_size,
+ uint32_t *start)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u16 tmp = 0;
return -1;
}
*preallocated_size = stolen - overhead;
+ *start = overhead;
return 0;
}
+#define PTE_ADDRESS_MASK 0xfffff000
+#define PTE_ADDRESS_MASK_HIGH 0x000000f0 /* i915+ */
+#define PTE_MAPPING_TYPE_UNCACHED (0 << 1)
+#define PTE_MAPPING_TYPE_DCACHE (1 << 1) /* i830 only */
+#define PTE_MAPPING_TYPE_CACHED (3 << 1)
+#define PTE_MAPPING_TYPE_MASK (3 << 1)
+#define PTE_VALID (1 << 0)
+
+/**
+ * i915_gtt_to_phys - take a GTT address and turn it into a physical one
+ * @dev: drm device
+ * @gtt_addr: address to translate
+ *
+ * Some chip functions require allocations from stolen space but need the
+ * physical address of the memory in question. We use this routine
+ * to get a physical address suitable for register programming from a given
+ * GTT address.
+ */
+static unsigned long i915_gtt_to_phys(struct drm_device *dev,
+ unsigned long gtt_addr)
+{
+ unsigned long *gtt;
+ unsigned long entry, phys;
+ int gtt_bar = IS_I9XX(dev) ? 0 : 1;
+ int gtt_offset, gtt_size;
+
+ if (IS_I965G(dev)) {
+ if (IS_G4X(dev) || IS_IGDNG(dev)) {
+ gtt_offset = 2*1024*1024;
+ gtt_size = 2*1024*1024;
+ } else {
+ gtt_offset = 512*1024;
+ gtt_size = 512*1024;
+ }
+ } else {
+ gtt_bar = 3;
+ gtt_offset = 0;
+ gtt_size = pci_resource_len(dev->pdev, gtt_bar);
+ }
+
+ gtt = ioremap_wc(pci_resource_start(dev->pdev, gtt_bar) + gtt_offset,
+ gtt_size);
+ if (!gtt) {
+ DRM_ERROR("ioremap of GTT failed\n");
+ return 0;
+ }
+
+ entry = *(volatile u32 *)(gtt + (gtt_addr / 1024));
+
+ DRM_DEBUG("GTT addr: 0x%08lx, PTE: 0x%08lx\n", gtt_addr, entry);
+
+ /* Mask out these reserved bits on this hardware. */
+ if (!IS_I9XX(dev) || IS_I915G(dev) || IS_I915GM(dev) ||
+ IS_I945G(dev) || IS_I945GM(dev)) {
+ entry &= ~PTE_ADDRESS_MASK_HIGH;
+ }
+
+ /* If it's not a mapping type we know, then bail. */
+ if ((entry & PTE_MAPPING_TYPE_MASK) != PTE_MAPPING_TYPE_UNCACHED &&
+ (entry & PTE_MAPPING_TYPE_MASK) != PTE_MAPPING_TYPE_CACHED) {
+ iounmap(gtt);
+ return 0;
+ }
+
+ if (!(entry & PTE_VALID)) {
+ DRM_ERROR("bad GTT entry in stolen space\n");
+ iounmap(gtt);
+ return 0;
+ }
+
+ iounmap(gtt);
+
+ phys =(entry & PTE_ADDRESS_MASK) |
+ ((uint64_t)(entry & PTE_ADDRESS_MASK_HIGH) << (32 - 4));
+
+ DRM_DEBUG("GTT addr: 0x%08lx, phys addr: 0x%08lx\n", gtt_addr, phys);
+
+ return phys;
+}
+
+static void i915_warn_stolen(struct drm_device *dev)
+{
+ DRM_ERROR("not enough stolen space for compressed buffer, disabling\n");
+ DRM_ERROR("hint: you may be able to increase stolen memory size in the BIOS to avoid this\n");
+}
+
+static void i915_setup_compression(struct drm_device *dev, int size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_mm_node *compressed_fb, *compressed_llb;
+ unsigned long cfb_base, ll_base;
+
+ /* Leave 1M for line length buffer & misc. */
+ compressed_fb = drm_mm_search_free(&dev_priv->vram, size, 4096, 0);
+ if (!compressed_fb) {
+ i915_warn_stolen(dev);
+ return;
+ }
+
+ compressed_fb = drm_mm_get_block(compressed_fb, size, 4096);
+ if (!compressed_fb) {
+ i915_warn_stolen(dev);
+ return;
+ }
+
+ cfb_base = i915_gtt_to_phys(dev, compressed_fb->start);
+ if (!cfb_base) {
+ DRM_ERROR("failed to get stolen phys addr, disabling FBC\n");
+ drm_mm_put_block(compressed_fb);
+ }
+
+ if (!IS_GM45(dev)) {
+ compressed_llb = drm_mm_search_free(&dev_priv->vram, 4096,
+ 4096, 0);
+ if (!compressed_llb) {
+ i915_warn_stolen(dev);
+ return;
+ }
+
+ compressed_llb = drm_mm_get_block(compressed_llb, 4096, 4096);
+ if (!compressed_llb) {
+ i915_warn_stolen(dev);
+ return;
+ }
+
+ ll_base = i915_gtt_to_phys(dev, compressed_llb->start);
+ if (!ll_base) {
+ DRM_ERROR("failed to get stolen phys addr, disabling FBC\n");
+ drm_mm_put_block(compressed_fb);
+ drm_mm_put_block(compressed_llb);
+ }
+ }
+
+ dev_priv->cfb_size = size;
+
+ if (IS_GM45(dev)) {
+ g4x_disable_fbc(dev);
+ I915_WRITE(DPFC_CB_BASE, compressed_fb->start);
+ } else {
+ i8xx_disable_fbc(dev);
+ I915_WRITE(FBC_CFB_BASE, cfb_base);
+ I915_WRITE(FBC_LL_BASE, ll_base);
+ }
+
+ DRM_DEBUG("FBC base 0x%08lx, ll base 0x%08lx, size %dM\n", cfb_base,
+ ll_base, size >> 20);
+}
+
/* true = enable decode, false = disable decoder */
static unsigned int i915_vga_set_decode(void *cookie, bool state)
{
}
static int i915_load_modeset_init(struct drm_device *dev,
+ unsigned long prealloc_start,
unsigned long prealloc_size,
unsigned long agp_size)
{
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
+ DRM_INFO("set up %ldM of stolen space\n", prealloc_size / (1024*1024));
+
+ /* We're off and running w/KMS */
+ dev_priv->mm.suspended = 0;
/* Let GEM Manage from end of prealloc space to end of aperture.
*
*/
i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
+ mutex_lock(&dev->struct_mutex);
ret = i915_gem_init_ringbuffer(dev);
+ mutex_unlock(&dev->struct_mutex);
if (ret)
goto out;
+ /* Try to set up FBC with a reasonable compressed buffer size */
+ if (I915_HAS_FBC(dev) && i915_powersave) {
+ int cfb_size;
+
+ /* Try to get an 8M buffer... */
+ if (prealloc_size > (9*1024*1024))
+ cfb_size = 8*1024*1024;
+ else /* fall back to 7/8 of the stolen space */
+ cfb_size = prealloc_size * 7 / 8;
+ i915_setup_compression(dev, cfb_size);
+ }
+
/* Allow hardware batchbuffers unless told otherwise.
*/
dev_priv->allow_batchbuffer = 1;
struct drm_i915_private *dev_priv = dev->dev_private;
resource_size_t base, size;
int ret = 0, mmio_bar = IS_I9XX(dev) ? 0 : 1;
- uint32_t agp_size, prealloc_size;
+ uint32_t agp_size, prealloc_size, prealloc_start;
/* i915 has 4 more counters */
dev->counters += 4;
"performance may suffer.\n");
}
- ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
+ ret = i915_probe_agp(dev, &agp_size, &prealloc_size, &prealloc_start);
if (ret)
goto out_iomapfree;
spin_lock_init(&dev_priv->user_irq_lock);
spin_lock_init(&dev_priv->error_lock);
dev_priv->user_irq_refcount = 0;
+ dev_priv->trace_irq_seqno = 0;
ret = drm_vblank_init(dev, I915_NUM_PIPE);
return ret;
}
+ /* Start out suspended */
+ dev_priv->mm.suspended = 1;
+
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
- ret = i915_load_modeset_init(dev, prealloc_size, agp_size);
+ ret = i915_load_modeset_init(dev, prealloc_start,
+ prealloc_size, agp_size);
if (ret < 0) {
DRM_ERROR("failed to init modeset\n");
goto out_workqueue_free;
if (!IS_IGDNG(dev))
intel_opregion_init(dev, 0);
+ setup_timer(&dev_priv->hangcheck_timer, i915_hangcheck_elapsed,
+ (unsigned long) dev);
return 0;
out_workqueue_free:
struct drm_i915_private *dev_priv = dev->dev_private;
destroy_workqueue(dev_priv->wq);
+ del_timer_sync(&dev_priv->hangcheck_timer);
io_mapping_free(dev_priv->mm.gtt_mapping);
if (dev_priv->mm.gtt_mtrr >= 0) {
DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
+ DRM_IOCTL_DEF(DRM_I915_GEM_MADVISE, i915_gem_madvise_ioctl, 0),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
pci_set_power_state(dev->pdev, PCI_D3hot);
}
+ /* Modeset on resume, not lid events */
+ dev_priv->modeset_on_lid = 0;
+
return 0;
}
struct drm_i915_private *dev_priv = dev->dev_private;
int ret = 0;
- pci_set_power_state(dev->pdev, PCI_D0);
- pci_restore_state(dev->pdev);
if (pci_enable_device(dev->pdev))
return -1;
pci_set_master(dev->pdev);
drm_helper_resume_force_mode(dev);
}
+ dev_priv->modeset_on_lid = 0;
+
return ret;
}
+/**
+ * i965_reset - reset chip after a hang
+ * @dev: drm device to reset
+ * @flags: reset domains
+ *
+ * Reset the chip. Useful if a hang is detected. Returns zero on successful
+ * reset or otherwise an error code.
+ *
+ * Procedure is fairly simple:
+ * - reset the chip using the reset reg
+ * - re-init context state
+ * - re-init hardware status page
+ * - re-init ring buffer
+ * - re-init interrupt state
+ * - re-init display
+ */
+int i965_reset(struct drm_device *dev, u8 flags)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned long timeout;
+ u8 gdrst;
+ /*
+ * We really should only reset the display subsystem if we actually
+ * need to
+ */
+ bool need_display = true;
+
+ mutex_lock(&dev->struct_mutex);
+
+ /*
+ * Clear request list
+ */
+ i915_gem_retire_requests(dev);
+
+ if (need_display)
+ i915_save_display(dev);
+
+ if (IS_I965G(dev) || IS_G4X(dev)) {
+ /*
+ * Set the domains we want to reset, then the reset bit (bit 0).
+ * Clear the reset bit after a while and wait for hardware status
+ * bit (bit 1) to be set
+ */
+ pci_read_config_byte(dev->pdev, GDRST, &gdrst);
+ pci_write_config_byte(dev->pdev, GDRST, gdrst | flags | ((flags == GDRST_FULL) ? 0x1 : 0x0));
+ udelay(50);
+ pci_write_config_byte(dev->pdev, GDRST, gdrst & 0xfe);
+
+ /* ...we don't want to loop forever though, 500ms should be plenty */
+ timeout = jiffies + msecs_to_jiffies(500);
+ do {
+ udelay(100);
+ pci_read_config_byte(dev->pdev, GDRST, &gdrst);
+ } while ((gdrst & 0x1) && time_after(timeout, jiffies));
+
+ if (gdrst & 0x1) {
+ WARN(true, "i915: Failed to reset chip\n");
+ mutex_unlock(&dev->struct_mutex);
+ return -EIO;
+ }
+ } else {
+ DRM_ERROR("Error occurred. Don't know how to reset this chip.\n");
+ return -ENODEV;
+ }
+
+ /* Ok, now get things going again... */
+
+ /*
+ * Everything depends on having the GTT running, so we need to start
+ * there. Fortunately we don't need to do this unless we reset the
+ * chip at a PCI level.
+ *
+ * Next we need to restore the context, but we don't use those
+ * yet either...
+ *
+ * Ring buffer needs to be re-initialized in the KMS case, or if X
+ * was running at the time of the reset (i.e. we weren't VT
+ * switched away).
+ */
+ if (drm_core_check_feature(dev, DRIVER_MODESET) ||
+ !dev_priv->mm.suspended) {
+ drm_i915_ring_buffer_t *ring = &dev_priv->ring;
+ struct drm_gem_object *obj = ring->ring_obj;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ dev_priv->mm.suspended = 0;
+
+ /* Stop the ring if it's running. */
+ I915_WRITE(PRB0_CTL, 0);
+ I915_WRITE(PRB0_TAIL, 0);
+ I915_WRITE(PRB0_HEAD, 0);
+
+ /* Initialize the ring. */
+ I915_WRITE(PRB0_START, obj_priv->gtt_offset);
+ I915_WRITE(PRB0_CTL,
+ ((obj->size - 4096) & RING_NR_PAGES) |
+ RING_NO_REPORT |
+ RING_VALID);
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ i915_kernel_lost_context(dev);
+ else {
+ ring->head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+ ring->tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
+ ring->space = ring->head - (ring->tail + 8);
+ if (ring->space < 0)
+ ring->space += ring->Size;
+ }
+
+ mutex_unlock(&dev->struct_mutex);
+ drm_irq_uninstall(dev);
+ drm_irq_install(dev);
+ mutex_lock(&dev->struct_mutex);
+ }
+
+ /*
+ * Display needs restore too...
+ */
+ if (need_display)
+ i915_restore_display(dev);
+
+ mutex_unlock(&dev->struct_mutex);
+ return 0;
+}
+
+
static int __devinit
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
{
driver.num_ioctls = i915_max_ioctl;
+ i915_gem_shrinker_init();
+
/*
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
* explicitly disabled with the module pararmeter.
static void __exit i915_exit(void)
{
+ i915_gem_shrinker_exit();
drm_exit(&driver);
}
PIPE_B,
};
+enum plane {
+ PLANE_A = 0,
+ PLANE_B,
+};
+
#define I915_NUM_PIPE 2
/* Interface history:
struct timeval time;
};
+struct drm_i915_display_funcs {
+ void (*dpms)(struct drm_crtc *crtc, int mode);
+ bool (*fbc_enabled)(struct drm_crtc *crtc);
+ void (*enable_fbc)(struct drm_crtc *crtc, unsigned long interval);
+ void (*disable_fbc)(struct drm_device *dev);
+ int (*get_display_clock_speed)(struct drm_device *dev);
+ int (*get_fifo_size)(struct drm_device *dev, int plane);
+ void (*update_wm)(struct drm_device *dev, int planea_clock,
+ int planeb_clock, int sr_hdisplay, int pixel_size);
+ /* clock updates for mode set */
+ /* cursor updates */
+ /* render clock increase/decrease */
+ /* display clock increase/decrease */
+ /* pll clock increase/decrease */
+ /* clock gating init */
+};
+
typedef struct drm_i915_private {
struct drm_device *dev;
spinlock_t user_irq_lock;
/** Refcount for i915_user_irq_get() versus i915_user_irq_put(). */
int user_irq_refcount;
+ u32 trace_irq_seqno;
/** Cached value of IMR to avoid reads in updating the bitfield */
u32 irq_mask_reg;
u32 pipestat[2];
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
+ /* For hangcheck timer */
+#define DRM_I915_HANGCHECK_PERIOD 75 /* in jiffies */
+ struct timer_list hangcheck_timer;
+ int hangcheck_count;
+ uint32_t last_acthd;
+
bool cursor_needs_physical;
struct drm_mm vram;
+ unsigned long cfb_size;
+ unsigned long cfb_pitch;
+ int cfb_fence;
+ int cfb_plane;
+
int irq_enabled;
struct intel_opregion opregion;
unsigned int edp_support:1;
int lvds_ssc_freq;
+ struct notifier_block lid_notifier;
+
int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
struct work_struct error_work;
struct workqueue_struct *wq;
+ /* Display functions */
+ struct drm_i915_display_funcs display;
+
/* Register state */
+ bool modeset_on_lid;
u8 saveLBB;
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
u32 saveVBLANK_A;
u32 saveVSYNC_A;
u32 saveBCLRPAT_A;
+ u32 saveTRANS_HTOTAL_A;
+ u32 saveTRANS_HBLANK_A;
+ u32 saveTRANS_HSYNC_A;
+ u32 saveTRANS_VTOTAL_A;
+ u32 saveTRANS_VBLANK_A;
+ u32 saveTRANS_VSYNC_A;
u32 savePIPEASTAT;
u32 saveDSPASTRIDE;
u32 saveDSPASIZE;
u32 saveDSPASURF;
u32 saveDSPATILEOFF;
u32 savePFIT_PGM_RATIOS;
+ u32 saveBLC_HIST_CTL;
u32 saveBLC_PWM_CTL;
u32 saveBLC_PWM_CTL2;
+ u32 saveBLC_CPU_PWM_CTL;
+ u32 saveBLC_CPU_PWM_CTL2;
u32 saveFPB0;
u32 saveFPB1;
u32 saveDPLL_B;
u32 saveVBLANK_B;
u32 saveVSYNC_B;
u32 saveBCLRPAT_B;
+ u32 saveTRANS_HTOTAL_B;
+ u32 saveTRANS_HBLANK_B;
+ u32 saveTRANS_HSYNC_B;
+ u32 saveTRANS_VTOTAL_B;
+ u32 saveTRANS_VBLANK_B;
+ u32 saveTRANS_VSYNC_B;
u32 savePIPEBSTAT;
u32 saveDSPBSTRIDE;
u32 saveDSPBSIZE;
u32 savePFIT_CONTROL;
u32 save_palette_a[256];
u32 save_palette_b[256];
+ u32 saveDPFC_CB_BASE;
u32 saveFBC_CFB_BASE;
u32 saveFBC_LL_BASE;
u32 saveFBC_CONTROL;
u32 saveIER;
u32 saveIIR;
u32 saveIMR;
+ u32 saveDEIER;
+ u32 saveDEIMR;
+ u32 saveGTIER;
+ u32 saveGTIMR;
+ u32 saveFDI_RXA_IMR;
+ u32 saveFDI_RXB_IMR;
u32 saveCACHE_MODE_0;
u32 saveD_STATE;
u32 saveDSPCLK_GATE_D;
u32 savePIPEB_DP_LINK_M;
u32 savePIPEA_DP_LINK_N;
u32 savePIPEB_DP_LINK_N;
+ u32 saveFDI_RXA_CTL;
+ u32 saveFDI_TXA_CTL;
+ u32 saveFDI_RXB_CTL;
+ u32 saveFDI_TXB_CTL;
+ u32 savePFA_CTL_1;
+ u32 savePFB_CTL_1;
+ u32 savePFA_WIN_SZ;
+ u32 savePFB_WIN_SZ;
+ u32 savePFA_WIN_POS;
+ u32 savePFB_WIN_POS;
struct {
struct drm_mm gtt_space;
struct io_mapping *gtt_mapping;
int gtt_mtrr;
+ /**
+ * Membership on list of all loaded devices, used to evict
+ * inactive buffers under memory pressure.
+ *
+ * Modifications should only be done whilst holding the
+ * shrink_list_lock spinlock.
+ */
+ struct list_head shrink_list;
+
/**
* List of objects currently involved in rendering from the
* ringbuffer.
* It prevents command submission from occuring and makes
* every pending request fail
*/
- int wedged;
+ atomic_t wedged;
/** Bit 6 swizzling required for X tiling */
uint32_t bit_6_swizzle_x;
struct drm_i915_gem_phys_object *phys_objs[I915_MAX_PHYS_OBJECT];
} mm;
struct sdvo_device_mapping sdvo_mappings[2];
+ /* indicate whether the LVDS_BORDER should be enabled or not */
+ unsigned int lvds_border_bits;
/* Reclocking support */
bool render_reclock_avail;
* This is the same as gtt_space->start
*/
uint32_t gtt_offset;
- /**
- * Required alignment for the object
- */
- uint32_t gtt_alignment;
+
/**
* Fake offset for use by mmap(2)
*/
* in an execbuffer object list.
*/
int in_execbuffer;
+
+ /**
+ * Advice: are the backing pages purgeable?
+ */
+ int madv;
};
/**
extern unsigned int i915_fbpercrtc;
extern unsigned int i915_powersave;
+extern void i915_save_display(struct drm_device *dev);
+extern void i915_restore_display(struct drm_device *dev);
extern int i915_master_create(struct drm_device *dev, struct drm_master *master);
extern void i915_master_destroy(struct drm_device *dev, struct drm_master *master);
extern int i915_emit_box(struct drm_device *dev,
struct drm_clip_rect *boxes,
int i, int DR1, int DR4);
+extern int i965_reset(struct drm_device *dev, u8 flags);
/* i915_irq.c */
+void i915_hangcheck_elapsed(unsigned long data);
extern int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int i915_irq_wait(struct drm_device *dev, void *data,
struct drm_file *file_priv);
void i915_user_irq_get(struct drm_device *dev);
+void i915_trace_irq_get(struct drm_device *dev, u32 seqno);
void i915_user_irq_put(struct drm_device *dev);
extern void i915_enable_interrupt (struct drm_device *dev);
struct drm_file *file_priv);
int i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+int i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
int i915_gem_entervt_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int i915_gem_leavevt_ioctl(struct drm_device *dev, void *data,
void i915_gem_release_mmap(struct drm_gem_object *obj);
void i915_gem_lastclose(struct drm_device *dev);
uint32_t i915_get_gem_seqno(struct drm_device *dev);
+bool i915_seqno_passed(uint32_t seq1, uint32_t seq2);
int i915_gem_object_get_fence_reg(struct drm_gem_object *obj);
int i915_gem_object_put_fence_reg(struct drm_gem_object *obj);
void i915_gem_retire_requests(struct drm_device *dev);
void i915_gem_object_put_pages(struct drm_gem_object *obj);
void i915_gem_release(struct drm_device * dev, struct drm_file *file_priv);
+void i915_gem_shrinker_init(void);
+void i915_gem_shrinker_exit(void);
+
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
extern void intel_modeset_init(struct drm_device *dev);
extern void intel_modeset_cleanup(struct drm_device *dev);
extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
+extern void i8xx_disable_fbc(struct drm_device *dev);
+extern void g4x_disable_fbc(struct drm_device *dev);
/**
* Lock test for when it's just for synchronization of ring access.
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22 || \
(dev)->pci_device == 0x2E32 || \
+ (dev)->pci_device == 0x2E42 || \
(dev)->pci_device == 0x0042 || \
(dev)->pci_device == 0x0046)
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22 || \
(dev)->pci_device == 0x2E32 || \
+ (dev)->pci_device == 0x2E42 || \
IS_GM45(dev))
#define IS_IGDG(dev) ((dev)->pci_device == 0xa001)
#define SUPPORTS_INTEGRATED_HDMI(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define SUPPORTS_INTEGRATED_DP(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define SUPPORTS_EDP(dev) (IS_IGDNG_M(dev))
-#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_I965G(dev))
+#define I915_HAS_HOTPLUG(dev) (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev) || IS_I965G(dev))
/* dsparb controlled by hw only */
#define DSPARB_HWCONTROL(dev) (IS_G4X(dev) || IS_IGDNG(dev))
#define HAS_FW_BLC(dev) (IS_I9XX(dev) || IS_G4X(dev) || IS_IGDNG(dev))
#define HAS_PIPE_CXSR(dev) (IS_G4X(dev) || IS_IGDNG(dev))
+#define I915_HAS_FBC(dev) (IS_MOBILE(dev) && \
+ (IS_I9XX(dev) || IS_GM45(dev)) && \
+ !IS_IGD(dev) && \
+ !IS_IGDNG(dev))
#define PRIMARY_RINGBUFFER_SIZE (128*1024)
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "i915_trace.h"
#include "intel_drv.h"
#include <linux/swap.h>
#include <linux/pci.h>
static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
unsigned alignment);
static void i915_gem_clear_fence_reg(struct drm_gem_object *obj);
-static int i915_gem_evict_something(struct drm_device *dev);
+static int i915_gem_evict_something(struct drm_device *dev, int min_size);
+static int i915_gem_evict_from_inactive_list(struct drm_device *dev);
static int i915_gem_phys_pwrite(struct drm_device *dev, struct drm_gem_object *obj,
struct drm_i915_gem_pwrite *args,
struct drm_file *file_priv);
+static LIST_HEAD(shrink_list);
+static DEFINE_SPINLOCK(shrink_list_lock);
+
int i915_gem_do_init(struct drm_device *dev, unsigned long start,
unsigned long end)
{
return ret;
}
+static inline gfp_t
+i915_gem_object_get_page_gfp_mask (struct drm_gem_object *obj)
+{
+ return mapping_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping);
+}
+
+static inline void
+i915_gem_object_set_page_gfp_mask (struct drm_gem_object *obj, gfp_t gfp)
+{
+ mapping_set_gfp_mask(obj->filp->f_path.dentry->d_inode->i_mapping, gfp);
+}
+
+static int
+i915_gem_object_get_pages_or_evict(struct drm_gem_object *obj)
+{
+ int ret;
+
+ ret = i915_gem_object_get_pages(obj);
+
+ /* If we've insufficient memory to map in the pages, attempt
+ * to make some space by throwing out some old buffers.
+ */
+ if (ret == -ENOMEM) {
+ struct drm_device *dev = obj->dev;
+ gfp_t gfp;
+
+ ret = i915_gem_evict_something(dev, obj->size);
+ if (ret)
+ return ret;
+
+ gfp = i915_gem_object_get_page_gfp_mask(obj);
+ i915_gem_object_set_page_gfp_mask(obj, gfp & ~__GFP_NORETRY);
+ ret = i915_gem_object_get_pages(obj);
+ i915_gem_object_set_page_gfp_mask (obj, gfp);
+ }
+
+ return ret;
+}
+
/**
* This is the fallback shmem pread path, which allocates temporary storage
* in kernel space to copy_to_user into outside of the struct_mutex, so we
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_get_pages(obj);
- if (ret != 0)
+ ret = i915_gem_object_get_pages_or_evict(obj);
+ if (ret)
goto fail_unlock;
ret = i915_gem_object_set_cpu_read_domain_range(obj, args->offset,
mutex_lock(&dev->struct_mutex);
- ret = i915_gem_object_get_pages(obj);
- if (ret != 0)
+ ret = i915_gem_object_get_pages_or_evict(obj);
+ if (ret)
goto fail_unlock;
ret = i915_gem_object_set_to_cpu_domain(obj, 1);
/* Now bind it into the GTT if needed */
mutex_lock(&dev->struct_mutex);
if (!obj_priv->gtt_space) {
- ret = i915_gem_object_bind_to_gtt(obj, obj_priv->gtt_alignment);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
-
- ret = i915_gem_object_set_to_gtt_domain(obj, write);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
+ ret = i915_gem_object_bind_to_gtt(obj, 0);
+ if (ret)
+ goto unlock;
list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret)
+ goto unlock;
}
/* Need a new fence register? */
if (obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
- if (ret) {
- mutex_unlock(&dev->struct_mutex);
- return VM_FAULT_SIGBUS;
- }
+ if (ret)
+ goto unlock;
}
pfn = ((dev->agp->base + obj_priv->gtt_offset) >> PAGE_SHIFT) +
/* Finally, remap it using the new GTT offset */
ret = vm_insert_pfn(vma, (unsigned long)vmf->virtual_address, pfn);
-
+unlock:
mutex_unlock(&dev->struct_mutex);
switch (ret) {
+ case 0:
+ case -ERESTARTSYS:
+ return VM_FAULT_NOPAGE;
case -ENOMEM:
case -EAGAIN:
return VM_FAULT_OOM;
- case -EFAULT:
- case -EINVAL:
- return VM_FAULT_SIGBUS;
default:
- return VM_FAULT_NOPAGE;
+ return VM_FAULT_SIGBUS;
}
}
obj_priv = obj->driver_private;
+ if (obj_priv->madv != I915_MADV_WILLNEED) {
+ DRM_ERROR("Attempting to mmap a purgeable buffer\n");
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+ return -EINVAL;
+ }
+
+
if (!obj_priv->mmap_offset) {
ret = i915_gem_create_mmap_offset(obj);
if (ret) {
args->offset = obj_priv->mmap_offset;
- obj_priv->gtt_alignment = i915_gem_get_gtt_alignment(obj);
-
- /* Make sure the alignment is correct for fence regs etc */
- if (obj_priv->agp_mem &&
- (obj_priv->gtt_offset & (obj_priv->gtt_alignment - 1))) {
- drm_gem_object_unreference(obj);
- mutex_unlock(&dev->struct_mutex);
- return -EINVAL;
- }
-
/*
* Pull it into the GTT so that we have a page list (makes the
* initial fault faster and any subsequent flushing possible).
*/
if (!obj_priv->agp_mem) {
- ret = i915_gem_object_bind_to_gtt(obj, obj_priv->gtt_alignment);
+ ret = i915_gem_object_bind_to_gtt(obj, 0);
if (ret) {
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
int i;
BUG_ON(obj_priv->pages_refcount == 0);
+ BUG_ON(obj_priv->madv == __I915_MADV_PURGED);
if (--obj_priv->pages_refcount != 0)
return;
if (obj_priv->tiling_mode != I915_TILING_NONE)
i915_gem_object_save_bit_17_swizzle(obj);
- for (i = 0; i < page_count; i++)
- if (obj_priv->pages[i] != NULL) {
- if (obj_priv->dirty)
- set_page_dirty(obj_priv->pages[i]);
+ if (obj_priv->madv == I915_MADV_DONTNEED)
+ obj_priv->dirty = 0;
+
+ for (i = 0; i < page_count; i++) {
+ if (obj_priv->pages[i] == NULL)
+ break;
+
+ if (obj_priv->dirty)
+ set_page_dirty(obj_priv->pages[i]);
+
+ if (obj_priv->madv == I915_MADV_WILLNEED)
mark_page_accessed(obj_priv->pages[i]);
- page_cache_release(obj_priv->pages[i]);
- }
+
+ page_cache_release(obj_priv->pages[i]);
+ }
obj_priv->dirty = 0;
drm_free_large(obj_priv->pages);
obj_priv->last_rendering_seqno = 0;
}
+/* Immediately discard the backing storage */
+static void
+i915_gem_object_truncate(struct drm_gem_object *obj)
+{
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ struct inode *inode;
+
+ inode = obj->filp->f_path.dentry->d_inode;
+ if (inode->i_op->truncate)
+ inode->i_op->truncate (inode);
+
+ obj_priv->madv = __I915_MADV_PURGED;
+}
+
+static inline int
+i915_gem_object_is_purgeable(struct drm_i915_gem_object *obj_priv)
+{
+ return obj_priv->madv == I915_MADV_DONTNEED;
+}
+
static void
i915_gem_object_move_to_inactive(struct drm_gem_object *obj)
{
if ((obj->write_domain & flush_domains) ==
obj->write_domain) {
+ uint32_t old_write_domain = obj->write_domain;
+
obj->write_domain = 0;
i915_gem_object_move_to_active(obj, seqno);
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
}
}
- if (was_empty && !dev_priv->mm.suspended)
- queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+ if (!dev_priv->mm.suspended) {
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+ if (was_empty)
+ queue_delayed_work(dev_priv->wq, &dev_priv->mm.retire_work, HZ);
+ }
return seqno;
}
{
drm_i915_private_t *dev_priv = dev->dev_private;
+ trace_i915_gem_request_retire(dev, request->seqno);
+
/* Move any buffers on the active list that are no longer referenced
* by the ringbuffer to the flushing/inactive lists as appropriate.
*/
/**
* Returns true if seq1 is later than seq2.
*/
-static int
+bool
i915_seqno_passed(uint32_t seq1, uint32_t seq2)
{
return (int32_t)(seq1 - seq2) >= 0;
drm_i915_private_t *dev_priv = dev->dev_private;
uint32_t seqno;
- if (!dev_priv->hw_status_page)
+ if (!dev_priv->hw_status_page || list_empty(&dev_priv->mm.request_list))
return;
seqno = i915_get_gem_seqno(dev);
retiring_seqno = request->seqno;
if (i915_seqno_passed(seqno, retiring_seqno) ||
- dev_priv->mm.wedged) {
+ atomic_read(&dev_priv->mm.wedged)) {
i915_gem_retire_request(dev, request);
list_del(&request->list);
} else
break;
}
+
+ if (unlikely (dev_priv->trace_irq_seqno &&
+ i915_seqno_passed(dev_priv->trace_irq_seqno, seqno))) {
+ i915_user_irq_put(dev);
+ dev_priv->trace_irq_seqno = 0;
+ }
}
void
BUG_ON(seqno == 0);
+ if (atomic_read(&dev_priv->mm.wedged))
+ return -EIO;
+
if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
if (IS_IGDNG(dev))
ier = I915_READ(DEIER) | I915_READ(GTIER);
i915_driver_irq_postinstall(dev);
}
+ trace_i915_gem_request_wait_begin(dev, seqno);
+
dev_priv->mm.waiting_gem_seqno = seqno;
i915_user_irq_get(dev);
ret = wait_event_interruptible(dev_priv->irq_queue,
i915_seqno_passed(i915_get_gem_seqno(dev),
seqno) ||
- dev_priv->mm.wedged);
+ atomic_read(&dev_priv->mm.wedged));
i915_user_irq_put(dev);
dev_priv->mm.waiting_gem_seqno = 0;
+
+ trace_i915_gem_request_wait_end(dev, seqno);
}
- if (dev_priv->mm.wedged)
+ if (atomic_read(&dev_priv->mm.wedged))
ret = -EIO;
if (ret && ret != -ERESTARTSYS)
DRM_INFO("%s: invalidate %08x flush %08x\n", __func__,
invalidate_domains, flush_domains);
#endif
+ trace_i915_gem_request_flush(dev, dev_priv->mm.next_gem_seqno,
+ invalidate_domains, flush_domains);
if (flush_domains & I915_GEM_DOMAIN_CPU)
drm_agp_chipset_flush(dev);
return -EINVAL;
}
+ /* blow away mappings if mapped through GTT */
+ i915_gem_release_mmap(obj);
+
+ if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
+ i915_gem_clear_fence_reg(obj);
+
/* Move the object to the CPU domain to ensure that
* any possible CPU writes while it's not in the GTT
* are flushed when we go to remap it. This will
return ret;
}
+ BUG_ON(obj_priv->active);
+
if (obj_priv->agp_mem != NULL) {
drm_unbind_agp(obj_priv->agp_mem);
drm_free_agp(obj_priv->agp_mem, obj->size / PAGE_SIZE);
obj_priv->agp_mem = NULL;
}
- BUG_ON(obj_priv->active);
-
- /* blow away mappings if mapped through GTT */
- i915_gem_release_mmap(obj);
-
- if (obj_priv->fence_reg != I915_FENCE_REG_NONE)
- i915_gem_clear_fence_reg(obj);
-
i915_gem_object_put_pages(obj);
+ BUG_ON(obj_priv->pages_refcount);
if (obj_priv->gtt_space) {
atomic_dec(&dev->gtt_count);
if (!list_empty(&obj_priv->list))
list_del_init(&obj_priv->list);
+ if (i915_gem_object_is_purgeable(obj_priv))
+ i915_gem_object_truncate(obj);
+
+ trace_i915_gem_object_unbind(obj);
+
+ return 0;
+}
+
+static struct drm_gem_object *
+i915_gem_find_inactive_object(struct drm_device *dev, int min_size)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv;
+ struct drm_gem_object *best = NULL;
+ struct drm_gem_object *first = NULL;
+
+ /* Try to find the smallest clean object */
+ list_for_each_entry(obj_priv, &dev_priv->mm.inactive_list, list) {
+ struct drm_gem_object *obj = obj_priv->obj;
+ if (obj->size >= min_size) {
+ if ((!obj_priv->dirty ||
+ i915_gem_object_is_purgeable(obj_priv)) &&
+ (!best || obj->size < best->size)) {
+ best = obj;
+ if (best->size == min_size)
+ return best;
+ }
+ if (!first)
+ first = obj;
+ }
+ }
+
+ return best ? best : first;
+}
+
+static int
+i915_gem_evict_everything(struct drm_device *dev)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ uint32_t seqno;
+ int ret;
+ bool lists_empty;
+
+ spin_lock(&dev_priv->mm.active_list_lock);
+ lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
+ list_empty(&dev_priv->mm.flushing_list) &&
+ list_empty(&dev_priv->mm.active_list));
+ spin_unlock(&dev_priv->mm.active_list_lock);
+
+ if (lists_empty)
+ return -ENOSPC;
+
+ /* Flush everything (on to the inactive lists) and evict */
+ i915_gem_flush(dev, I915_GEM_GPU_DOMAINS, I915_GEM_GPU_DOMAINS);
+ seqno = i915_add_request(dev, NULL, I915_GEM_GPU_DOMAINS);
+ if (seqno == 0)
+ return -ENOMEM;
+
+ ret = i915_wait_request(dev, seqno);
+ if (ret)
+ return ret;
+
+ ret = i915_gem_evict_from_inactive_list(dev);
+ if (ret)
+ return ret;
+
+ spin_lock(&dev_priv->mm.active_list_lock);
+ lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
+ list_empty(&dev_priv->mm.flushing_list) &&
+ list_empty(&dev_priv->mm.active_list));
+ spin_unlock(&dev_priv->mm.active_list_lock);
+ BUG_ON(!lists_empty);
+
return 0;
}
static int
-i915_gem_evict_something(struct drm_device *dev)
+i915_gem_evict_something(struct drm_device *dev, int min_size)
{
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_gem_object *obj;
- struct drm_i915_gem_object *obj_priv;
- int ret = 0;
+ int ret;
for (;;) {
+ i915_gem_retire_requests(dev);
+
/* If there's an inactive buffer available now, grab it
* and be done.
*/
- if (!list_empty(&dev_priv->mm.inactive_list)) {
- obj_priv = list_first_entry(&dev_priv->mm.inactive_list,
- struct drm_i915_gem_object,
- list);
- obj = obj_priv->obj;
- BUG_ON(obj_priv->pin_count != 0);
+ obj = i915_gem_find_inactive_object(dev, min_size);
+ if (obj) {
+ struct drm_i915_gem_object *obj_priv;
+
#if WATCH_LRU
DRM_INFO("%s: evicting %p\n", __func__, obj);
#endif
+ obj_priv = obj->driver_private;
+ BUG_ON(obj_priv->pin_count != 0);
BUG_ON(obj_priv->active);
/* Wait on the rendering and unbind the buffer. */
- ret = i915_gem_object_unbind(obj);
- break;
+ return i915_gem_object_unbind(obj);
}
/* If we didn't get anything, but the ring is still processing
- * things, wait for one of those things to finish and hopefully
- * leave us a buffer to evict.
+ * things, wait for the next to finish and hopefully leave us
+ * a buffer to evict.
*/
if (!list_empty(&dev_priv->mm.request_list)) {
struct drm_i915_gem_request *request;
ret = i915_wait_request(dev, request->seqno);
if (ret)
- break;
+ return ret;
- /* if waiting caused an object to become inactive,
- * then loop around and wait for it. Otherwise, we
- * assume that waiting freed and unbound something,
- * so there should now be some space in the GTT
- */
- if (!list_empty(&dev_priv->mm.inactive_list))
- continue;
- break;
+ continue;
}
/* If we didn't have anything on the request list but there
* will get moved to inactive.
*/
if (!list_empty(&dev_priv->mm.flushing_list)) {
- obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
- struct drm_i915_gem_object,
- list);
- obj = obj_priv->obj;
+ struct drm_i915_gem_object *obj_priv;
- i915_gem_flush(dev,
- obj->write_domain,
- obj->write_domain);
- i915_add_request(dev, NULL, obj->write_domain);
+ /* Find an object that we can immediately reuse */
+ list_for_each_entry(obj_priv, &dev_priv->mm.flushing_list, list) {
+ obj = obj_priv->obj;
+ if (obj->size >= min_size)
+ break;
- obj = NULL;
- continue;
+ obj = NULL;
+ }
+
+ if (obj != NULL) {
+ uint32_t seqno;
+
+ i915_gem_flush(dev,
+ obj->write_domain,
+ obj->write_domain);
+ seqno = i915_add_request(dev, NULL, obj->write_domain);
+ if (seqno == 0)
+ return -ENOMEM;
+
+ ret = i915_wait_request(dev, seqno);
+ if (ret)
+ return ret;
+
+ continue;
+ }
}
- DRM_ERROR("inactive empty %d request empty %d "
- "flushing empty %d\n",
- list_empty(&dev_priv->mm.inactive_list),
- list_empty(&dev_priv->mm.request_list),
- list_empty(&dev_priv->mm.flushing_list));
- /* If we didn't do any of the above, there's nothing to be done
- * and we just can't fit it in.
+ /* If we didn't do any of the above, there's no single buffer
+ * large enough to swap out for the new one, so just evict
+ * everything and start again. (This should be rare.)
*/
- return -ENOSPC;
+ if (!list_empty (&dev_priv->mm.inactive_list))
+ return i915_gem_evict_from_inactive_list(dev);
+ else
+ return i915_gem_evict_everything(dev);
}
- return ret;
-}
-
-static int
-i915_gem_evict_everything(struct drm_device *dev)
-{
- int ret;
-
- for (;;) {
- ret = i915_gem_evict_something(dev);
- if (ret != 0)
- break;
- }
- if (ret == -ENOSPC)
- return 0;
- return ret;
}
int
BUG_ON(obj_priv->pages != NULL);
obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *));
if (obj_priv->pages == NULL) {
- DRM_ERROR("Faled to allocate page list\n");
obj_priv->pages_refcount--;
return -ENOMEM;
}
page = read_mapping_page(mapping, i, NULL);
if (IS_ERR(page)) {
ret = PTR_ERR(page);
- DRM_ERROR("read_mapping_page failed: %d\n", ret);
i915_gem_object_put_pages(obj);
return ret;
}
else
i830_write_fence_reg(reg);
+ trace_i915_gem_object_get_fence(obj, i, obj_priv->tiling_mode);
+
return 0;
}
drm_i915_private_t *dev_priv = dev->dev_private;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
struct drm_mm_node *free_space;
- int page_count, ret;
+ bool retry_alloc = false;
+ int ret;
if (dev_priv->mm.suspended)
return -EBUSY;
+
+ if (obj_priv->madv != I915_MADV_WILLNEED) {
+ DRM_ERROR("Attempting to bind a purgeable object\n");
+ return -EINVAL;
+ }
+
if (alignment == 0)
alignment = i915_gem_get_gtt_alignment(obj);
if (alignment & (i915_gem_get_gtt_alignment(obj) - 1)) {
}
}
if (obj_priv->gtt_space == NULL) {
- bool lists_empty;
-
/* If the gtt is empty and we're still having trouble
* fitting our object in, we're out of memory.
*/
#if WATCH_LRU
DRM_INFO("%s: GTT full, evicting something\n", __func__);
#endif
- spin_lock(&dev_priv->mm.active_list_lock);
- lists_empty = (list_empty(&dev_priv->mm.inactive_list) &&
- list_empty(&dev_priv->mm.flushing_list) &&
- list_empty(&dev_priv->mm.active_list));
- spin_unlock(&dev_priv->mm.active_list_lock);
- if (lists_empty) {
- DRM_ERROR("GTT full, but LRU list empty\n");
- return -ENOSPC;
- }
-
- ret = i915_gem_evict_something(dev);
- if (ret != 0) {
- if (ret != -ERESTARTSYS)
- DRM_ERROR("Failed to evict a buffer %d\n", ret);
+ ret = i915_gem_evict_something(dev, obj->size);
+ if (ret)
return ret;
- }
+
goto search_free;
}
DRM_INFO("Binding object of size %zd at 0x%08x\n",
obj->size, obj_priv->gtt_offset);
#endif
+ if (retry_alloc) {
+ i915_gem_object_set_page_gfp_mask (obj,
+ i915_gem_object_get_page_gfp_mask (obj) & ~__GFP_NORETRY);
+ }
ret = i915_gem_object_get_pages(obj);
+ if (retry_alloc) {
+ i915_gem_object_set_page_gfp_mask (obj,
+ i915_gem_object_get_page_gfp_mask (obj) | __GFP_NORETRY);
+ }
if (ret) {
drm_mm_put_block(obj_priv->gtt_space);
obj_priv->gtt_space = NULL;
+
+ if (ret == -ENOMEM) {
+ /* first try to clear up some space from the GTT */
+ ret = i915_gem_evict_something(dev, obj->size);
+ if (ret) {
+ /* now try to shrink everyone else */
+ if (! retry_alloc) {
+ retry_alloc = true;
+ goto search_free;
+ }
+
+ return ret;
+ }
+
+ goto search_free;
+ }
+
return ret;
}
- page_count = obj->size / PAGE_SIZE;
/* Create an AGP memory structure pointing at our pages, and bind it
* into the GTT.
*/
obj_priv->agp_mem = drm_agp_bind_pages(dev,
obj_priv->pages,
- page_count,
+ obj->size >> PAGE_SHIFT,
obj_priv->gtt_offset,
obj_priv->agp_type);
if (obj_priv->agp_mem == NULL) {
i915_gem_object_put_pages(obj);
drm_mm_put_block(obj_priv->gtt_space);
obj_priv->gtt_space = NULL;
- return -ENOMEM;
+
+ ret = i915_gem_evict_something(dev, obj->size);
+ if (ret)
+ return ret;
+
+ goto search_free;
}
atomic_inc(&dev->gtt_count);
atomic_add(obj->size, &dev->gtt_memory);
BUG_ON(obj->read_domains & I915_GEM_GPU_DOMAINS);
BUG_ON(obj->write_domain & I915_GEM_GPU_DOMAINS);
+ trace_i915_gem_object_bind(obj, obj_priv->gtt_offset);
+
return 0;
}
if (obj_priv->pages == NULL)
return;
- /* XXX: The 865 in particular appears to be weird in how it handles
- * cache flushing. We haven't figured it out, but the
- * clflush+agp_chipset_flush doesn't appear to successfully get the
- * data visible to the PGU, while wbinvd + agp_chipset_flush does.
- */
- if (IS_I865G(obj->dev)) {
- wbinvd();
- return;
- }
+ trace_i915_gem_object_clflush(obj);
drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE);
}
{
struct drm_device *dev = obj->dev;
uint32_t seqno;
+ uint32_t old_write_domain;
if ((obj->write_domain & I915_GEM_GPU_DOMAINS) == 0)
return;
/* Queue the GPU write cache flushing we need. */
+ old_write_domain = obj->write_domain;
i915_gem_flush(dev, 0, obj->write_domain);
seqno = i915_add_request(dev, NULL, obj->write_domain);
obj->write_domain = 0;
i915_gem_object_move_to_active(obj, seqno);
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
/** Flushes the GTT write domain for the object if it's dirty. */
static void
i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj)
{
+ uint32_t old_write_domain;
+
if (obj->write_domain != I915_GEM_DOMAIN_GTT)
return;
* to it immediately go to main memory as far as we know, so there's
* no chipset flush. It also doesn't land in render cache.
*/
+ old_write_domain = obj->write_domain;
obj->write_domain = 0;
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
/** Flushes the CPU write domain for the object if it's dirty. */
i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
+ uint32_t old_write_domain;
if (obj->write_domain != I915_GEM_DOMAIN_CPU)
return;
i915_gem_clflush_object(obj);
drm_agp_chipset_flush(dev);
+ old_write_domain = obj->write_domain;
obj->write_domain = 0;
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
/**
i915_gem_object_set_to_gtt_domain(struct drm_gem_object *obj, int write)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ uint32_t old_write_domain, old_read_domains;
int ret;
/* Not valid to be called on unbound objects. */
if (ret != 0)
return ret;
+ old_write_domain = obj->write_domain;
+ old_read_domains = obj->read_domains;
+
/* If we're writing through the GTT domain, then CPU and GPU caches
* will need to be invalidated at next use.
*/
obj_priv->dirty = 1;
}
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ old_write_domain);
+
return 0;
}
static int
i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj, int write)
{
+ uint32_t old_write_domain, old_read_domains;
int ret;
i915_gem_object_flush_gpu_write_domain(obj);
*/
i915_gem_object_set_to_full_cpu_read_domain(obj);
+ old_write_domain = obj->write_domain;
+ old_read_domains = obj->read_domains;
+
/* Flush the CPU cache if it's still invalid. */
if ((obj->read_domains & I915_GEM_DOMAIN_CPU) == 0) {
i915_gem_clflush_object(obj);
obj->write_domain = I915_GEM_DOMAIN_CPU;
}
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ old_write_domain);
+
return 0;
}
struct drm_i915_gem_object *obj_priv = obj->driver_private;
uint32_t invalidate_domains = 0;
uint32_t flush_domains = 0;
+ uint32_t old_read_domains;
BUG_ON(obj->pending_read_domains & I915_GEM_DOMAIN_CPU);
BUG_ON(obj->pending_write_domain == I915_GEM_DOMAIN_CPU);
i915_gem_clflush_object(obj);
}
+ old_read_domains = obj->read_domains;
+
/* The actual obj->write_domain will be updated with
* pending_write_domain after we emit the accumulated flush for all
* of our domain changes in execbuffers (which clears objects'
obj->read_domains, obj->write_domain,
dev->invalidate_domains, dev->flush_domains);
#endif
+
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ obj->write_domain);
}
/**
uint64_t offset, uint64_t size)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ uint32_t old_read_domains;
int i, ret;
if (offset == 0 && size == obj->size)
*/
BUG_ON((obj->write_domain & ~I915_GEM_DOMAIN_CPU) != 0);
+ old_read_domains = obj->read_domains;
obj->read_domains |= I915_GEM_DOMAIN_CPU;
+ trace_i915_gem_object_change_domain(obj,
+ old_read_domains,
+ obj->write_domain);
+
return 0;
}
}
target_obj_priv = target_obj->driver_private;
+#if WATCH_RELOC
+ DRM_INFO("%s: obj %p offset %08x target %d "
+ "read %08x write %08x gtt %08x "
+ "presumed %08x delta %08x\n",
+ __func__,
+ obj,
+ (int) reloc->offset,
+ (int) reloc->target_handle,
+ (int) reloc->read_domains,
+ (int) reloc->write_domain,
+ (int) target_obj_priv->gtt_offset,
+ (int) reloc->presumed_offset,
+ reloc->delta);
+#endif
+
/* The target buffer should have appeared before us in the
* exec_object list, so it should have a GTT space bound by now.
*/
return -EINVAL;
}
- if (reloc->offset > obj->size - 4) {
- DRM_ERROR("Relocation beyond object bounds: "
- "obj %p target %d offset %d size %d.\n",
- obj, reloc->target_handle,
- (int) reloc->offset, (int) obj->size);
- drm_gem_object_unreference(target_obj);
- i915_gem_object_unpin(obj);
- return -EINVAL;
- }
- if (reloc->offset & 3) {
- DRM_ERROR("Relocation not 4-byte aligned: "
- "obj %p target %d offset %d.\n",
- obj, reloc->target_handle,
- (int) reloc->offset);
- drm_gem_object_unreference(target_obj);
- i915_gem_object_unpin(obj);
- return -EINVAL;
- }
-
+ /* Validate that the target is in a valid r/w GPU domain */
if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
reloc->read_domains & I915_GEM_DOMAIN_CPU) {
DRM_ERROR("reloc with read/write CPU domains: "
i915_gem_object_unpin(obj);
return -EINVAL;
}
-
if (reloc->write_domain && target_obj->pending_write_domain &&
reloc->write_domain != target_obj->pending_write_domain) {
DRM_ERROR("Write domain conflict: "
return -EINVAL;
}
-#if WATCH_RELOC
- DRM_INFO("%s: obj %p offset %08x target %d "
- "read %08x write %08x gtt %08x "
- "presumed %08x delta %08x\n",
- __func__,
- obj,
- (int) reloc->offset,
- (int) reloc->target_handle,
- (int) reloc->read_domains,
- (int) reloc->write_domain,
- (int) target_obj_priv->gtt_offset,
- (int) reloc->presumed_offset,
- reloc->delta);
-#endif
-
target_obj->pending_read_domains |= reloc->read_domains;
target_obj->pending_write_domain |= reloc->write_domain;
continue;
}
+ /* Check that the relocation address is valid... */
+ if (reloc->offset > obj->size - 4) {
+ DRM_ERROR("Relocation beyond object bounds: "
+ "obj %p target %d offset %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset, (int) obj->size);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
+ }
+ if (reloc->offset & 3) {
+ DRM_ERROR("Relocation not 4-byte aligned: "
+ "obj %p target %d offset %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
+ }
+
+ /* and points to somewhere within the target object. */
+ if (reloc->delta >= target_obj->size) {
+ DRM_ERROR("Relocation beyond target object bounds: "
+ "obj %p target %d delta %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->delta, (int) target_obj->size);
+ drm_gem_object_unreference(target_obj);
+ i915_gem_object_unpin(obj);
+ return -EINVAL;
+ }
+
ret = i915_gem_object_set_to_gtt_domain(obj, 1);
if (ret != 0) {
drm_gem_object_unreference(target_obj);
exec_start = (uint32_t) exec_offset + exec->batch_start_offset;
exec_len = (uint32_t) exec->batch_len;
+ trace_i915_gem_request_submit(dev, dev_priv->mm.next_gem_seqno + 1);
+
count = nbox ? nbox : 1;
for (i = 0; i < count; i++) {
i915_verify_inactive(dev, __FILE__, __LINE__);
- if (dev_priv->mm.wedged) {
+ if (atomic_read(&dev_priv->mm.wedged)) {
DRM_ERROR("Execbuf while wedged\n");
mutex_unlock(&dev->struct_mutex);
ret = -EIO;
/* error other than GTT full, or we've already tried again */
if (ret != -ENOSPC || pin_tries >= 1) {
- if (ret != -ERESTARTSYS)
- DRM_ERROR("Failed to pin buffers %d\n", ret);
+ if (ret != -ERESTARTSYS) {
+ unsigned long long total_size = 0;
+ for (i = 0; i < args->buffer_count; i++)
+ total_size += object_list[i]->size;
+ DRM_ERROR("Failed to pin buffer %d of %d, total %llu bytes: %d\n",
+ pinned+1, args->buffer_count,
+ total_size, ret);
+ DRM_ERROR("%d objects [%d pinned], "
+ "%d object bytes [%d pinned], "
+ "%d/%d gtt bytes\n",
+ atomic_read(&dev->object_count),
+ atomic_read(&dev->pin_count),
+ atomic_read(&dev->object_memory),
+ atomic_read(&dev->pin_memory),
+ atomic_read(&dev->gtt_memory),
+ dev->gtt_total);
+ }
goto err;
}
/* evict everyone we can from the aperture */
ret = i915_gem_evict_everything(dev);
- if (ret)
+ if (ret && ret != -ENOSPC)
goto err;
}
for (i = 0; i < args->buffer_count; i++) {
struct drm_gem_object *obj = object_list[i];
+ uint32_t old_write_domain = obj->write_domain;
obj->write_domain = obj->pending_write_domain;
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
i915_verify_inactive(dev, __FILE__, __LINE__);
i915_verify_inactive(dev, __FILE__, __LINE__);
if (obj_priv->gtt_space == NULL) {
ret = i915_gem_object_bind_to_gtt(obj, alignment);
- if (ret != 0) {
- if (ret != -EBUSY && ret != -ERESTARTSYS)
- DRM_ERROR("Failure to bind: %d\n", ret);
+ if (ret)
return ret;
- }
}
/*
* Pre-965 chips need a fence register set up in order to
}
obj_priv = obj->driver_private;
+ if (obj_priv->madv != I915_MADV_WILLNEED) {
+ DRM_ERROR("Attempting to pin a purgeable buffer\n");
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+ return -EINVAL;
+ }
+
if (obj_priv->pin_filp != NULL && obj_priv->pin_filp != file_priv) {
DRM_ERROR("Already pinned in i915_gem_pin_ioctl(): %d\n",
args->handle);
return i915_gem_ring_throttle(dev, file_priv);
}
+int
+i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_i915_gem_madvise *args = data;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+
+ switch (args->madv) {
+ case I915_MADV_DONTNEED:
+ case I915_MADV_WILLNEED:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ obj = drm_gem_object_lookup(dev, file_priv, args->handle);
+ if (obj == NULL) {
+ DRM_ERROR("Bad handle in i915_gem_madvise_ioctl(): %d\n",
+ args->handle);
+ return -EBADF;
+ }
+
+ mutex_lock(&dev->struct_mutex);
+ obj_priv = obj->driver_private;
+
+ if (obj_priv->pin_count) {
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+
+ DRM_ERROR("Attempted i915_gem_madvise_ioctl() on a pinned object\n");
+ return -EINVAL;
+ }
+
+ if (obj_priv->madv != __I915_MADV_PURGED)
+ obj_priv->madv = args->madv;
+
+ /* if the object is no longer bound, discard its backing storage */
+ if (i915_gem_object_is_purgeable(obj_priv) &&
+ obj_priv->gtt_space == NULL)
+ i915_gem_object_truncate(obj);
+
+ args->retained = obj_priv->madv != __I915_MADV_PURGED;
+
+ drm_gem_object_unreference(obj);
+ mutex_unlock(&dev->struct_mutex);
+
+ return 0;
+}
+
int i915_gem_init_object(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv;
obj_priv->fence_reg = I915_FENCE_REG_NONE;
INIT_LIST_HEAD(&obj_priv->list);
INIT_LIST_HEAD(&obj_priv->fence_list);
+ obj_priv->madv = I915_MADV_WILLNEED;
+
+ trace_i915_gem_object_create(obj);
return 0;
}
struct drm_device *dev = obj->dev;
struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ trace_i915_gem_object_destroy(obj);
+
while (obj_priv->pin_count > 0)
i915_gem_object_unpin(obj);
i915_gem_object_unbind(obj);
- i915_gem_free_mmap_offset(obj);
+ if (obj_priv->mmap_offset)
+ i915_gem_free_mmap_offset(obj);
kfree(obj_priv->page_cpu_valid);
kfree(obj_priv->bit_17);
kfree(obj->driver_private);
}
-/** Unbinds all objects that are on the given buffer list. */
+/** Unbinds all inactive objects. */
static int
-i915_gem_evict_from_list(struct drm_device *dev, struct list_head *head)
+i915_gem_evict_from_inactive_list(struct drm_device *dev)
{
- struct drm_gem_object *obj;
- struct drm_i915_gem_object *obj_priv;
- int ret;
+ drm_i915_private_t *dev_priv = dev->dev_private;
- while (!list_empty(head)) {
- obj_priv = list_first_entry(head,
- struct drm_i915_gem_object,
- list);
- obj = obj_priv->obj;
+ while (!list_empty(&dev_priv->mm.inactive_list)) {
+ struct drm_gem_object *obj;
+ int ret;
- if (obj_priv->pin_count != 0) {
- DRM_ERROR("Pinned object in unbind list\n");
- mutex_unlock(&dev->struct_mutex);
- return -EINVAL;
- }
+ obj = list_first_entry(&dev_priv->mm.inactive_list,
+ struct drm_i915_gem_object,
+ list)->obj;
ret = i915_gem_object_unbind(obj);
if (ret != 0) {
- DRM_ERROR("Error unbinding object in LeaveVT: %d\n",
- ret);
- mutex_unlock(&dev->struct_mutex);
+ DRM_ERROR("Error unbinding object: %d\n", ret);
return ret;
}
}
-
return 0;
}
* We need to replace this with a semaphore, or something.
*/
dev_priv->mm.suspended = 1;
+ del_timer(&dev_priv->hangcheck_timer);
/* Cancel the retire work handler, wait for it to finish if running
*/
if (last_seqno == cur_seqno) {
if (stuck++ > 100) {
DRM_ERROR("hardware wedged\n");
- dev_priv->mm.wedged = 1;
+ atomic_set(&dev_priv->mm.wedged, 1);
DRM_WAKEUP(&dev_priv->irq_queue);
break;
}
i915_gem_retire_requests(dev);
spin_lock(&dev_priv->mm.active_list_lock);
- if (!dev_priv->mm.wedged) {
+ if (!atomic_read(&dev_priv->mm.wedged)) {
/* Active and flushing should now be empty as we've
* waited for a sequence higher than any pending execbuffer
*/
* the GPU domains and just stuff them onto inactive.
*/
while (!list_empty(&dev_priv->mm.active_list)) {
- struct drm_i915_gem_object *obj_priv;
+ struct drm_gem_object *obj;
+ uint32_t old_write_domain;
- obj_priv = list_first_entry(&dev_priv->mm.active_list,
- struct drm_i915_gem_object,
- list);
- obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
- i915_gem_object_move_to_inactive(obj_priv->obj);
+ obj = list_first_entry(&dev_priv->mm.active_list,
+ struct drm_i915_gem_object,
+ list)->obj;
+ old_write_domain = obj->write_domain;
+ obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj);
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
spin_unlock(&dev_priv->mm.active_list_lock);
while (!list_empty(&dev_priv->mm.flushing_list)) {
- struct drm_i915_gem_object *obj_priv;
+ struct drm_gem_object *obj;
+ uint32_t old_write_domain;
- obj_priv = list_first_entry(&dev_priv->mm.flushing_list,
- struct drm_i915_gem_object,
- list);
- obj_priv->obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
- i915_gem_object_move_to_inactive(obj_priv->obj);
+ obj = list_first_entry(&dev_priv->mm.flushing_list,
+ struct drm_i915_gem_object,
+ list)->obj;
+ old_write_domain = obj->write_domain;
+ obj->write_domain &= ~I915_GEM_GPU_DOMAINS;
+ i915_gem_object_move_to_inactive(obj);
+
+ trace_i915_gem_object_change_domain(obj,
+ obj->read_domains,
+ old_write_domain);
}
/* Move all inactive buffers out of the GTT. */
- ret = i915_gem_evict_from_list(dev, &dev_priv->mm.inactive_list);
+ ret = i915_gem_evict_from_inactive_list(dev);
WARN_ON(!list_empty(&dev_priv->mm.inactive_list));
if (ret) {
mutex_unlock(&dev->struct_mutex);
if (drm_core_check_feature(dev, DRIVER_MODESET))
return 0;
- if (dev_priv->mm.wedged) {
+ if (atomic_read(&dev_priv->mm.wedged)) {
DRM_ERROR("Reenabling wedged hardware, good luck\n");
- dev_priv->mm.wedged = 0;
+ atomic_set(&dev_priv->mm.wedged, 0);
}
mutex_lock(&dev->struct_mutex);
i915_gem_retire_work_handler);
dev_priv->mm.next_gem_seqno = 1;
+ spin_lock(&shrink_list_lock);
+ list_add(&dev_priv->mm.shrink_list, &shrink_list);
+ spin_unlock(&shrink_list_lock);
+
/* Old X drivers will take 0-2 for front, back, depth buffers */
dev_priv->fence_reg_start = 3;
list_del_init(i915_file_priv->mm.request_list.next);
mutex_unlock(&dev->struct_mutex);
}
+
+static int
+i915_gem_shrink(int nr_to_scan, gfp_t gfp_mask)
+{
+ drm_i915_private_t *dev_priv, *next_dev;
+ struct drm_i915_gem_object *obj_priv, *next_obj;
+ int cnt = 0;
+ int would_deadlock = 1;
+
+ /* "fast-path" to count number of available objects */
+ if (nr_to_scan == 0) {
+ spin_lock(&shrink_list_lock);
+ list_for_each_entry(dev_priv, &shrink_list, mm.shrink_list) {
+ struct drm_device *dev = dev_priv->dev;
+
+ if (mutex_trylock(&dev->struct_mutex)) {
+ list_for_each_entry(obj_priv,
+ &dev_priv->mm.inactive_list,
+ list)
+ cnt++;
+ mutex_unlock(&dev->struct_mutex);
+ }
+ }
+ spin_unlock(&shrink_list_lock);
+
+ return (cnt / 100) * sysctl_vfs_cache_pressure;
+ }
+
+ spin_lock(&shrink_list_lock);
+
+ /* first scan for clean buffers */
+ list_for_each_entry_safe(dev_priv, next_dev,
+ &shrink_list, mm.shrink_list) {
+ struct drm_device *dev = dev_priv->dev;
+
+ if (! mutex_trylock(&dev->struct_mutex))
+ continue;
+
+ spin_unlock(&shrink_list_lock);
+
+ i915_gem_retire_requests(dev);
+
+ list_for_each_entry_safe(obj_priv, next_obj,
+ &dev_priv->mm.inactive_list,
+ list) {
+ if (i915_gem_object_is_purgeable(obj_priv)) {
+ i915_gem_object_unbind(obj_priv->obj);
+ if (--nr_to_scan <= 0)
+ break;
+ }
+ }
+
+ spin_lock(&shrink_list_lock);
+ mutex_unlock(&dev->struct_mutex);
+
+ would_deadlock = 0;
+
+ if (nr_to_scan <= 0)
+ break;
+ }
+
+ /* second pass, evict/count anything still on the inactive list */
+ list_for_each_entry_safe(dev_priv, next_dev,
+ &shrink_list, mm.shrink_list) {
+ struct drm_device *dev = dev_priv->dev;
+
+ if (! mutex_trylock(&dev->struct_mutex))
+ continue;
+
+ spin_unlock(&shrink_list_lock);
+
+ list_for_each_entry_safe(obj_priv, next_obj,
+ &dev_priv->mm.inactive_list,
+ list) {
+ if (nr_to_scan > 0) {
+ i915_gem_object_unbind(obj_priv->obj);
+ nr_to_scan--;
+ } else
+ cnt++;
+ }
+
+ spin_lock(&shrink_list_lock);
+ mutex_unlock(&dev->struct_mutex);
+
+ would_deadlock = 0;
+ }
+
+ spin_unlock(&shrink_list_lock);
+
+ if (would_deadlock)
+ return -1;
+ else if (cnt > 0)
+ return (cnt / 100) * sysctl_vfs_cache_pressure;
+ else
+ return 0;
+}
+
+static struct shrinker shrinker = {
+ .shrink = i915_gem_shrink,
+ .seeks = DEFAULT_SEEKS,
+};
+
+__init void
+i915_gem_shrinker_init(void)
+{
+ register_shrinker(&shrinker);
+}
+
+__exit void
+i915_gem_shrinker_exit(void)
+{
+ unregister_shrinker(&shrinker);
+}
#include "drm.h"
#include "i915_drm.h"
#include "i915_drv.h"
+#include "i915_trace.h"
#include "intel_drv.h"
#define MAX_NOPID ((u32)~0)
}
if (gt_iir & GT_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ u32 seqno = i915_get_gem_seqno(dev);
+ dev_priv->mm.irq_gem_seqno = seqno;
+ trace_i915_gem_request_complete(dev, seqno);
DRM_WAKEUP(&dev_priv->irq_queue);
}
drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t,
error_work);
struct drm_device *dev = dev_priv->dev;
- char *event_string = "ERROR=1";
- char *envp[] = { event_string, NULL };
+ char *error_event[] = { "ERROR=1", NULL };
+ char *reset_event[] = { "RESET=1", NULL };
+ char *reset_done_event[] = { "ERROR=0", NULL };
DRM_DEBUG("generating error event\n");
-
- kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, envp);
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, error_event);
+
+ if (atomic_read(&dev_priv->mm.wedged)) {
+ if (IS_I965G(dev)) {
+ DRM_DEBUG("resetting chip\n");
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_event);
+ if (!i965_reset(dev, GDRST_RENDER)) {
+ atomic_set(&dev_priv->mm.wedged, 0);
+ kobject_uevent_env(&dev->primary->kdev.kobj, KOBJ_CHANGE, reset_done_event);
+ }
+ } else {
+ printk("reboot required\n");
+ }
+ }
}
/**
* so userspace knows something bad happened (should trigger collection
* of a ring dump etc.).
*/
-static void i915_handle_error(struct drm_device *dev)
+static void i915_handle_error(struct drm_device *dev, bool wedged)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 eir = I915_READ(EIR);
I915_WRITE(IIR, I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT);
}
+ if (wedged) {
+ atomic_set(&dev_priv->mm.wedged, 1);
+
+ /*
+ * Wakeup waiting processes so they don't hang
+ */
+ printk("i915: Waking up sleeping processes\n");
+ DRM_WAKEUP(&dev_priv->irq_queue);
+ }
+
queue_work(dev_priv->wq, &dev_priv->error_work);
}
pipeb_stats = I915_READ(PIPEBSTAT);
if (iir & I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT)
- i915_handle_error(dev);
+ i915_handle_error(dev, false);
/*
* Clear the PIPE(A|B)STAT regs before the IIR
}
if (iir & I915_USER_INTERRUPT) {
- dev_priv->mm.irq_gem_seqno = i915_get_gem_seqno(dev);
+ u32 seqno = i915_get_gem_seqno(dev);
+ dev_priv->mm.irq_gem_seqno = seqno;
+ trace_i915_gem_request_complete(dev, seqno);
DRM_WAKEUP(&dev_priv->irq_queue);
+ dev_priv->hangcheck_count = 0;
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
}
if (pipea_stats & vblank_status) {
spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags);
}
+void i915_trace_irq_get(struct drm_device *dev, u32 seqno)
+{
+ drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+
+ if (dev_priv->trace_irq_seqno == 0)
+ i915_user_irq_get(dev);
+
+ dev_priv->trace_irq_seqno = seqno;
+}
+
static int i915_wait_irq(struct drm_device * dev, int irq_nr)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
return -EINVAL;
}
+struct drm_i915_gem_request *i915_get_tail_request(struct drm_device *dev) {
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ return list_entry(dev_priv->mm.request_list.prev, struct drm_i915_gem_request, list);
+}
+
+/**
+ * This is called when the chip hasn't reported back with completed
+ * batchbuffers in a long time. The first time this is called we simply record
+ * ACTHD. If ACTHD hasn't changed by the time the hangcheck timer elapses
+ * again, we assume the chip is wedged and try to fix it.
+ */
+void i915_hangcheck_elapsed(unsigned long data)
+{
+ struct drm_device *dev = (struct drm_device *)data;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ uint32_t acthd;
+
+ if (!IS_I965G(dev))
+ acthd = I915_READ(ACTHD);
+ else
+ acthd = I915_READ(ACTHD_I965);
+
+ /* If all work is done then ACTHD clearly hasn't advanced. */
+ if (list_empty(&dev_priv->mm.request_list) ||
+ i915_seqno_passed(i915_get_gem_seqno(dev), i915_get_tail_request(dev)->seqno)) {
+ dev_priv->hangcheck_count = 0;
+ return;
+ }
+
+ if (dev_priv->last_acthd == acthd && dev_priv->hangcheck_count > 0) {
+ DRM_ERROR("Hangcheck timer elapsed... GPU hung\n");
+ i915_handle_error(dev, true);
+ return;
+ }
+
+ /* Reset timer case chip hangs without another request being added */
+ mod_timer(&dev_priv->hangcheck_timer, jiffies + DRM_I915_HANGCHECK_PERIOD);
+
+ if (acthd != dev_priv->last_acthd)
+ dev_priv->hangcheck_count = 0;
+ else
+ dev_priv->hangcheck_count++;
+
+ dev_priv->last_acthd = acthd;
+}
+
/* drm_dma.h hooks
*/
static void igdng_irq_preinstall(struct drm_device *dev)
struct drm_i915_private *dev_priv = dev->dev_private;
struct opregion_asle *asle = dev_priv->opregion.asle;
u32 blc_pwm_ctl, blc_pwm_ctl2;
+ u32 max_backlight, level, shift;
if (!(bclp & ASLE_BCLP_VALID))
return ASLE_BACKLIGHT_FAIL;
return ASLE_BACKLIGHT_FAIL;
blc_pwm_ctl = I915_READ(BLC_PWM_CTL);
- blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
blc_pwm_ctl2 = I915_READ(BLC_PWM_CTL2);
- if (blc_pwm_ctl2 & BLM_COMBINATION_MODE)
+ if (IS_I965G(dev) && (blc_pwm_ctl2 & BLM_COMBINATION_MODE))
pci_write_config_dword(dev->pdev, PCI_LBPC, bclp);
- else
- I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | ((bclp * 0x101)-1));
-
+ else {
+ if (IS_IGD(dev)) {
+ blc_pwm_ctl &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
+ max_backlight = (blc_pwm_ctl & BACKLIGHT_MODULATION_FREQ_MASK) >>
+ BACKLIGHT_MODULATION_FREQ_SHIFT;
+ shift = BACKLIGHT_DUTY_CYCLE_SHIFT + 1;
+ } else {
+ blc_pwm_ctl &= ~BACKLIGHT_DUTY_CYCLE_MASK;
+ max_backlight = ((blc_pwm_ctl & BACKLIGHT_MODULATION_FREQ_MASK) >>
+ BACKLIGHT_MODULATION_FREQ_SHIFT) * 2;
+ shift = BACKLIGHT_DUTY_CYCLE_SHIFT;
+ }
+ level = (bclp * max_backlight) / 255;
+ I915_WRITE(BLC_PWM_CTL, blc_pwm_ctl | (level << shift));
+ }
asle->cblv = (bclp*0x64)/0xff | ASLE_CBLV_VALID;
return 0;
#define I915_GC_RENDER_CLOCK_200_MHZ (1 << 0)
#define I915_GC_RENDER_CLOCK_333_MHZ (4 << 0)
#define LBB 0xf4
+#define GDRST 0xc0
+#define GDRST_FULL (0<<2)
+#define GDRST_RENDER (1<<2)
+#define GDRST_MEDIA (3<<2)
/* VGA stuff */
#define FBC_CTL_PLANEA (0<<0)
#define FBC_CTL_PLANEB (1<<0)
#define FBC_FENCE_OFF 0x0321b
+#define FBC_TAG 0x03300
#define FBC_LL_SIZE (1536)
+/* Framebuffer compression for GM45+ */
+#define DPFC_CB_BASE 0x3200
+#define DPFC_CONTROL 0x3208
+#define DPFC_CTL_EN (1<<31)
+#define DPFC_CTL_PLANEA (0<<30)
+#define DPFC_CTL_PLANEB (1<<30)
+#define DPFC_CTL_FENCE_EN (1<<29)
+#define DPFC_SR_EN (1<<10)
+#define DPFC_CTL_LIMIT_1X (0<<6)
+#define DPFC_CTL_LIMIT_2X (1<<6)
+#define DPFC_CTL_LIMIT_4X (2<<6)
+#define DPFC_RECOMP_CTL 0x320c
+#define DPFC_RECOMP_STALL_EN (1<<27)
+#define DPFC_RECOMP_STALL_WM_SHIFT (16)
+#define DPFC_RECOMP_STALL_WM_MASK (0x07ff0000)
+#define DPFC_RECOMP_TIMER_COUNT_SHIFT (0)
+#define DPFC_RECOMP_TIMER_COUNT_MASK (0x0000003f)
+#define DPFC_STATUS 0x3210
+#define DPFC_INVAL_SEG_SHIFT (16)
+#define DPFC_INVAL_SEG_MASK (0x07ff0000)
+#define DPFC_COMP_SEG_SHIFT (0)
+#define DPFC_COMP_SEG_MASK (0x000003ff)
+#define DPFC_STATUS2 0x3214
+#define DPFC_FENCE_YOFF 0x3218
+#define DPFC_CHICKEN 0x3224
+#define DPFC_HT_MODIFY (1<<31)
+
/*
* GPIO regs
*/
#define LVDS_PORT_EN (1 << 31)
/* Selects pipe B for LVDS data. Must be set on pre-965. */
#define LVDS_PIPEB_SELECT (1 << 30)
+/* Enable border for unscaled (or aspect-scaled) display */
+#define LVDS_BORDER_ENABLE (1 << 15)
/*
* Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per
* pixel.
#define BACKLIGHT_DUTY_CYCLE_SHIFT (0)
#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff)
+#define BLC_HIST_CTL 0x61260
+
/* TV port control */
#define TV_CTL 0x68000
/** Enables the TV encoder */
#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
#define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1)
#define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0)
+#define PIPE_BPC_MASK (7 << 5) /* Ironlake */
+#define PIPE_8BPC (0 << 5)
+#define PIPE_10BPC (1 << 5)
+#define PIPE_6BPC (2 << 5)
+#define PIPE_12BPC (3 << 5)
#define DSPARB 0x70030
#define DSPARB_CSTART_MASK (0x7f << 7)
#define DSPARB_AEND_SHIFT 0
#define DSPFW1 0x70034
+#define DSPFW_SR_SHIFT 23
+#define DSPFW_CURSORB_SHIFT 16
+#define DSPFW_PLANEB_SHIFT 8
#define DSPFW2 0x70038
+#define DSPFW_CURSORA_MASK 0x00003f00
+#define DSPFW_CURSORA_SHIFT 16
#define DSPFW3 0x7003c
+#define DSPFW_HPLL_SR_EN (1<<31)
+#define DSPFW_CURSOR_SR_SHIFT 24
#define IGD_SELF_REFRESH_EN (1<<30)
/* FIFO watermark sizes etc */
+#define G4X_FIFO_LINE_SIZE 64
#define I915_FIFO_LINE_SIZE 64
#define I830_FIFO_LINE_SIZE 32
+
+#define G4X_FIFO_SIZE 127
#define I945_FIFO_SIZE 127 /* 945 & 965 */
#define I915_FIFO_SIZE 95
#define I855GM_FIFO_SIZE 127 /* In cachelines */
#define I830_FIFO_SIZE 95
+
+#define G4X_MAX_WM 0x3f
#define I915_MAX_WM 0x3f
#define IGD_DISPLAY_FIFO 512 /* in 64byte unit */
#define PFA_CTL_1 0x68080
#define PFB_CTL_1 0x68880
#define PF_ENABLE (1<<31)
+#define PF_FILTER_MASK (3<<23)
+#define PF_FILTER_PROGRAMMED (0<<23)
+#define PF_FILTER_MED_3x3 (1<<23)
+#define PF_FILTER_EDGE_ENHANCE (2<<23)
+#define PF_FILTER_EDGE_SOFTEN (3<<23)
#define PFA_WIN_SZ 0x68074
#define PFB_WIN_SZ 0x68874
+#define PFA_WIN_POS 0x68070
+#define PFB_WIN_POS 0x68870
/* legacy palette */
#define LGC_PALETTE_A 0x4a000
#define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13)
#define DREF_SSC_SOURCE_DISABLE (0<<11)
#define DREF_SSC_SOURCE_ENABLE (2<<11)
-#define DREF_SSC_SOURCE_MASK (2<<11)
+#define DREF_SSC_SOURCE_MASK (3<<11)
#define DREF_NONSPREAD_SOURCE_DISABLE (0<<9)
#define DREF_NONSPREAD_CK505_ENABLE (1<<9)
#define DREF_NONSPREAD_SOURCE_ENABLE (2<<9)
-#define DREF_NONSPREAD_SOURCE_MASK (2<<9)
+#define DREF_NONSPREAD_SOURCE_MASK (3<<9)
#define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7)
#define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7)
#define DREF_SSC4_DOWNSPREAD (0<<6)
static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpll_reg;
- if (pipe == PIPE_A)
- return (I915_READ(DPLL_A) & DPLL_VCO_ENABLE);
- else
- return (I915_READ(DPLL_B) & DPLL_VCO_ENABLE);
+ if (IS_IGDNG(dev)) {
+ dpll_reg = (pipe == PIPE_A) ? PCH_DPLL_A: PCH_DPLL_B;
+ } else {
+ dpll_reg = (pipe == PIPE_A) ? DPLL_A: DPLL_B;
+ }
+
+ return (I915_READ(dpll_reg) & DPLL_VCO_ENABLE);
}
static void i915_save_palette(struct drm_device *dev, enum pipe pipe)
if (!i915_pipe_enabled(dev, pipe))
return;
+ if (IS_IGDNG(dev))
+ reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B;
+
if (pipe == PIPE_A)
array = dev_priv->save_palette_a;
else
if (!i915_pipe_enabled(dev, pipe))
return;
+ if (IS_IGDNG(dev))
+ reg = (pipe == PIPE_A) ? LGC_PALETTE_A : LGC_PALETTE_B;
+
if (pipe == PIPE_A)
array = dev_priv->save_palette_a;
else
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
+
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
- dev_priv->saveFPA0 = I915_READ(FPA0);
- dev_priv->saveFPA1 = I915_READ(FPA1);
- dev_priv->saveDPLL_A = I915_READ(DPLL_A);
- if (IS_I965G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFPA0 = I915_READ(PCH_FPA0);
+ dev_priv->saveFPA1 = I915_READ(PCH_FPA1);
+ dev_priv->saveDPLL_A = I915_READ(PCH_DPLL_A);
+ } else {
+ dev_priv->saveFPA0 = I915_READ(FPA0);
+ dev_priv->saveFPA1 = I915_READ(FPA1);
+ dev_priv->saveDPLL_A = I915_READ(DPLL_A);
+ }
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
dev_priv->saveDPLL_A_MD = I915_READ(DPLL_A_MD);
dev_priv->saveHTOTAL_A = I915_READ(HTOTAL_A);
dev_priv->saveHBLANK_A = I915_READ(HBLANK_A);
dev_priv->saveVTOTAL_A = I915_READ(VTOTAL_A);
dev_priv->saveVBLANK_A = I915_READ(VBLANK_A);
dev_priv->saveVSYNC_A = I915_READ(VSYNC_A);
- dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFDI_TXA_CTL = I915_READ(FDI_TXA_CTL);
+ dev_priv->saveFDI_RXA_CTL = I915_READ(FDI_RXA_CTL);
+
+ dev_priv->savePFA_CTL_1 = I915_READ(PFA_CTL_1);
+ dev_priv->savePFA_WIN_SZ = I915_READ(PFA_WIN_SZ);
+ dev_priv->savePFA_WIN_POS = I915_READ(PFA_WIN_POS);
+
+ dev_priv->saveTRANS_HTOTAL_A = I915_READ(TRANS_HTOTAL_A);
+ dev_priv->saveTRANS_HBLANK_A = I915_READ(TRANS_HBLANK_A);
+ dev_priv->saveTRANS_HSYNC_A = I915_READ(TRANS_HSYNC_A);
+ dev_priv->saveTRANS_VTOTAL_A = I915_READ(TRANS_VTOTAL_A);
+ dev_priv->saveTRANS_VBLANK_A = I915_READ(TRANS_VBLANK_A);
+ dev_priv->saveTRANS_VSYNC_A = I915_READ(TRANS_VSYNC_A);
+ }
dev_priv->saveDSPACNTR = I915_READ(DSPACNTR);
dev_priv->saveDSPASTRIDE = I915_READ(DSPASTRIDE);
/* Pipe & plane B info */
dev_priv->savePIPEBCONF = I915_READ(PIPEBCONF);
dev_priv->savePIPEBSRC = I915_READ(PIPEBSRC);
- dev_priv->saveFPB0 = I915_READ(FPB0);
- dev_priv->saveFPB1 = I915_READ(FPB1);
- dev_priv->saveDPLL_B = I915_READ(DPLL_B);
- if (IS_I965G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFPB0 = I915_READ(PCH_FPB0);
+ dev_priv->saveFPB1 = I915_READ(PCH_FPB1);
+ dev_priv->saveDPLL_B = I915_READ(PCH_DPLL_B);
+ } else {
+ dev_priv->saveFPB0 = I915_READ(FPB0);
+ dev_priv->saveFPB1 = I915_READ(FPB1);
+ dev_priv->saveDPLL_B = I915_READ(DPLL_B);
+ }
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
dev_priv->saveDPLL_B_MD = I915_READ(DPLL_B_MD);
dev_priv->saveHTOTAL_B = I915_READ(HTOTAL_B);
dev_priv->saveHBLANK_B = I915_READ(HBLANK_B);
dev_priv->saveVTOTAL_B = I915_READ(VTOTAL_B);
dev_priv->saveVBLANK_B = I915_READ(VBLANK_B);
dev_priv->saveVSYNC_B = I915_READ(VSYNC_B);
- dev_priv->saveBCLRPAT_A = I915_READ(BCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ dev_priv->saveBCLRPAT_B = I915_READ(BCLRPAT_B);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveFDI_TXB_CTL = I915_READ(FDI_TXB_CTL);
+ dev_priv->saveFDI_RXB_CTL = I915_READ(FDI_RXB_CTL);
+
+ dev_priv->savePFB_CTL_1 = I915_READ(PFB_CTL_1);
+ dev_priv->savePFB_WIN_SZ = I915_READ(PFB_WIN_SZ);
+ dev_priv->savePFB_WIN_POS = I915_READ(PFB_WIN_POS);
+
+ dev_priv->saveTRANS_HTOTAL_B = I915_READ(TRANS_HTOTAL_B);
+ dev_priv->saveTRANS_HBLANK_B = I915_READ(TRANS_HBLANK_B);
+ dev_priv->saveTRANS_HSYNC_B = I915_READ(TRANS_HSYNC_B);
+ dev_priv->saveTRANS_VTOTAL_B = I915_READ(TRANS_VTOTAL_B);
+ dev_priv->saveTRANS_VBLANK_B = I915_READ(TRANS_VBLANK_B);
+ dev_priv->saveTRANS_VSYNC_B = I915_READ(TRANS_VSYNC_B);
+ }
dev_priv->saveDSPBCNTR = I915_READ(DSPBCNTR);
dev_priv->saveDSPBSTRIDE = I915_READ(DSPBSTRIDE);
dev_priv->savePIPEBSTAT = I915_READ(PIPEBSTAT);
return;
}
+
static void i915_restore_modeset_reg(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
+ int dpll_a_reg, fpa0_reg, fpa1_reg;
+ int dpll_b_reg, fpb0_reg, fpb1_reg;
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
+ if (IS_IGDNG(dev)) {
+ dpll_a_reg = PCH_DPLL_A;
+ dpll_b_reg = PCH_DPLL_B;
+ fpa0_reg = PCH_FPA0;
+ fpb0_reg = PCH_FPB0;
+ fpa1_reg = PCH_FPA1;
+ fpb1_reg = PCH_FPB1;
+ } else {
+ dpll_a_reg = DPLL_A;
+ dpll_b_reg = DPLL_B;
+ fpa0_reg = FPA0;
+ fpb0_reg = FPB0;
+ fpa1_reg = FPA1;
+ fpb1_reg = FPB1;
+ }
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
- I915_WRITE(DPLL_A, dev_priv->saveDPLL_A &
+ I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
- I915_WRITE(FPA0, dev_priv->saveFPA0);
- I915_WRITE(FPA1, dev_priv->saveFPA1);
+ I915_WRITE(fpa0_reg, dev_priv->saveFPA0);
+ I915_WRITE(fpa1_reg, dev_priv->saveFPA1);
/* Actually enable it */
- I915_WRITE(DPLL_A, dev_priv->saveDPLL_A);
+ I915_WRITE(dpll_a_reg, dev_priv->saveDPLL_A);
DRM_UDELAY(150);
- if (IS_I965G(dev))
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
I915_WRITE(DPLL_A_MD, dev_priv->saveDPLL_A_MD);
DRM_UDELAY(150);
I915_WRITE(VTOTAL_A, dev_priv->saveVTOTAL_A);
I915_WRITE(VBLANK_A, dev_priv->saveVBLANK_A);
I915_WRITE(VSYNC_A, dev_priv->saveVSYNC_A);
- I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+ if (!IS_IGDNG(dev))
+ I915_WRITE(BCLRPAT_A, dev_priv->saveBCLRPAT_A);
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(FDI_RXA_CTL, dev_priv->saveFDI_RXA_CTL);
+ I915_WRITE(FDI_TXA_CTL, dev_priv->saveFDI_TXA_CTL);
+
+ I915_WRITE(PFA_CTL_1, dev_priv->savePFA_CTL_1);
+ I915_WRITE(PFA_WIN_SZ, dev_priv->savePFA_WIN_SZ);
+ I915_WRITE(PFA_WIN_POS, dev_priv->savePFA_WIN_POS);
+
+ I915_WRITE(TRANS_HTOTAL_A, dev_priv->saveTRANS_HTOTAL_A);
+ I915_WRITE(TRANS_HBLANK_A, dev_priv->saveTRANS_HBLANK_A);
+ I915_WRITE(TRANS_HSYNC_A, dev_priv->saveTRANS_HSYNC_A);
+ I915_WRITE(TRANS_VTOTAL_A, dev_priv->saveTRANS_VTOTAL_A);
+ I915_WRITE(TRANS_VBLANK_A, dev_priv->saveTRANS_VBLANK_A);
+ I915_WRITE(TRANS_VSYNC_A, dev_priv->saveTRANS_VSYNC_A);
+ }
/* Restore plane info */
I915_WRITE(DSPASIZE, dev_priv->saveDSPASIZE);
/* Pipe & plane B info */
if (dev_priv->saveDPLL_B & DPLL_VCO_ENABLE) {
- I915_WRITE(DPLL_B, dev_priv->saveDPLL_B &
+ I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B &
~DPLL_VCO_ENABLE);
DRM_UDELAY(150);
}
- I915_WRITE(FPB0, dev_priv->saveFPB0);
- I915_WRITE(FPB1, dev_priv->saveFPB1);
+ I915_WRITE(fpb0_reg, dev_priv->saveFPB0);
+ I915_WRITE(fpb1_reg, dev_priv->saveFPB1);
/* Actually enable it */
- I915_WRITE(DPLL_B, dev_priv->saveDPLL_B);
+ I915_WRITE(dpll_b_reg, dev_priv->saveDPLL_B);
DRM_UDELAY(150);
if (IS_I965G(dev))
I915_WRITE(DPLL_B_MD, dev_priv->saveDPLL_B_MD);
I915_WRITE(VTOTAL_B, dev_priv->saveVTOTAL_B);
I915_WRITE(VBLANK_B, dev_priv->saveVBLANK_B);
I915_WRITE(VSYNC_B, dev_priv->saveVSYNC_B);
- I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+ if (!IS_IGDNG(dev))
+ I915_WRITE(BCLRPAT_B, dev_priv->saveBCLRPAT_B);
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(FDI_RXB_CTL, dev_priv->saveFDI_RXB_CTL);
+ I915_WRITE(FDI_TXB_CTL, dev_priv->saveFDI_TXB_CTL);
+
+ I915_WRITE(PFB_CTL_1, dev_priv->savePFB_CTL_1);
+ I915_WRITE(PFB_WIN_SZ, dev_priv->savePFB_WIN_SZ);
+ I915_WRITE(PFB_WIN_POS, dev_priv->savePFB_WIN_POS);
+
+ I915_WRITE(TRANS_HTOTAL_B, dev_priv->saveTRANS_HTOTAL_B);
+ I915_WRITE(TRANS_HBLANK_B, dev_priv->saveTRANS_HBLANK_B);
+ I915_WRITE(TRANS_HSYNC_B, dev_priv->saveTRANS_HSYNC_B);
+ I915_WRITE(TRANS_VTOTAL_B, dev_priv->saveTRANS_VTOTAL_B);
+ I915_WRITE(TRANS_VBLANK_B, dev_priv->saveTRANS_VBLANK_B);
+ I915_WRITE(TRANS_VSYNC_B, dev_priv->saveTRANS_VSYNC_B);
+ }
/* Restore plane info */
I915_WRITE(DSPBSIZE, dev_priv->saveDSPBSIZE);
return;
}
-int i915_save_state(struct drm_device *dev)
+
+void i915_save_display(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- int i;
-
- pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
-
- /* Render Standby */
- if (IS_I965G(dev) && IS_MOBILE(dev))
- dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
-
- /* Hardware status page */
- dev_priv->saveHWS = I915_READ(HWS_PGA);
/* Display arbitration control */
dev_priv->saveDSPARB = I915_READ(DSPARB);
/* This is only meaningful in non-KMS mode */
/* Don't save them in KMS mode */
i915_save_modeset_reg(dev);
+
/* Cursor state */
dev_priv->saveCURACNTR = I915_READ(CURACNTR);
dev_priv->saveCURAPOS = I915_READ(CURAPOS);
dev_priv->saveCURSIZE = I915_READ(CURSIZE);
/* CRT state */
- dev_priv->saveADPA = I915_READ(ADPA);
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveADPA = I915_READ(PCH_ADPA);
+ } else {
+ dev_priv->saveADPA = I915_READ(ADPA);
+ }
/* LVDS state */
- dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
- dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
- dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
- if (IS_I965G(dev))
- dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
- if (IS_MOBILE(dev) && !IS_I830(dev))
- dev_priv->saveLVDS = I915_READ(LVDS);
- if (!IS_I830(dev) && !IS_845G(dev))
+ if (IS_IGDNG(dev)) {
+ dev_priv->savePP_CONTROL = I915_READ(PCH_PP_CONTROL);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_PCH_CTL1);
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_PCH_CTL2);
+ dev_priv->saveBLC_CPU_PWM_CTL = I915_READ(BLC_PWM_CPU_CTL);
+ dev_priv->saveBLC_CPU_PWM_CTL2 = I915_READ(BLC_PWM_CPU_CTL2);
+ dev_priv->saveLVDS = I915_READ(PCH_LVDS);
+ } else {
+ dev_priv->savePP_CONTROL = I915_READ(PP_CONTROL);
+ dev_priv->savePFIT_PGM_RATIOS = I915_READ(PFIT_PGM_RATIOS);
+ dev_priv->saveBLC_PWM_CTL = I915_READ(BLC_PWM_CTL);
+ dev_priv->saveBLC_HIST_CTL = I915_READ(BLC_HIST_CTL);
+ if (IS_I965G(dev))
+ dev_priv->saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2);
+ if (IS_MOBILE(dev) && !IS_I830(dev))
+ dev_priv->saveLVDS = I915_READ(LVDS);
+ }
+
+ if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev))
dev_priv->savePFIT_CONTROL = I915_READ(PFIT_CONTROL);
- dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
- dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
- dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+
+ if (IS_IGDNG(dev)) {
+ dev_priv->savePP_ON_DELAYS = I915_READ(PCH_PP_ON_DELAYS);
+ dev_priv->savePP_OFF_DELAYS = I915_READ(PCH_PP_OFF_DELAYS);
+ dev_priv->savePP_DIVISOR = I915_READ(PCH_PP_DIVISOR);
+ } else {
+ dev_priv->savePP_ON_DELAYS = I915_READ(PP_ON_DELAYS);
+ dev_priv->savePP_OFF_DELAYS = I915_READ(PP_OFF_DELAYS);
+ dev_priv->savePP_DIVISOR = I915_READ(PP_DIVISOR);
+ }
/* Display Port state */
if (SUPPORTS_INTEGRATED_DP(dev)) {
/* FIXME: save TV & SDVO state */
/* FBC state */
- dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
- dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
- dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
- dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
-
- /* Interrupt state */
- dev_priv->saveIIR = I915_READ(IIR);
- dev_priv->saveIER = I915_READ(IER);
- dev_priv->saveIMR = I915_READ(IMR);
+ if (IS_GM45(dev)) {
+ dev_priv->saveDPFC_CB_BASE = I915_READ(DPFC_CB_BASE);
+ } else {
+ dev_priv->saveFBC_CFB_BASE = I915_READ(FBC_CFB_BASE);
+ dev_priv->saveFBC_LL_BASE = I915_READ(FBC_LL_BASE);
+ dev_priv->saveFBC_CONTROL2 = I915_READ(FBC_CONTROL2);
+ dev_priv->saveFBC_CONTROL = I915_READ(FBC_CONTROL);
+ }
/* VGA state */
dev_priv->saveVGA0 = I915_READ(VGA0);
dev_priv->saveVGA1 = I915_READ(VGA1);
dev_priv->saveVGA_PD = I915_READ(VGA_PD);
- dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+ if (IS_IGDNG(dev))
+ dev_priv->saveVGACNTRL = I915_READ(CPU_VGACNTRL);
+ else
+ dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
+
+ i915_save_vga(dev);
+}
+
+void i915_restore_display(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* Display arbitration */
+ I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+
+ /* Display port ratios (must be done before clock is set) */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
+ I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
+ I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
+ I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
+ I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
+ I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
+ I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
+ I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
+ }
+
+ /* This is only meaningful in non-KMS mode */
+ /* Don't restore them in KMS mode */
+ i915_restore_modeset_reg(dev);
+
+ /* Cursor state */
+ I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+ I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+ I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+ I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+ I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+ I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+ if (!IS_I9XX(dev))
+ I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
+ /* CRT state */
+ if (IS_IGDNG(dev))
+ I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
+ else
+ I915_WRITE(ADPA, dev_priv->saveADPA);
+
+ /* LVDS state */
+ if (IS_I965G(dev) && !IS_IGDNG(dev))
+ I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(PCH_LVDS, dev_priv->saveLVDS);
+ } else if (IS_MOBILE(dev) && !IS_I830(dev))
+ I915_WRITE(LVDS, dev_priv->saveLVDS);
+
+ if (!IS_I830(dev) && !IS_845G(dev) && !IS_IGDNG(dev))
+ I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
+
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(BLC_PWM_PCH_CTL1, dev_priv->saveBLC_PWM_CTL);
+ I915_WRITE(BLC_PWM_PCH_CTL2, dev_priv->saveBLC_PWM_CTL2);
+ I915_WRITE(BLC_PWM_CPU_CTL, dev_priv->saveBLC_CPU_PWM_CTL);
+ I915_WRITE(BLC_PWM_CPU_CTL2, dev_priv->saveBLC_CPU_PWM_CTL2);
+ I915_WRITE(PCH_PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
+ I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
+ I915_WRITE(PCH_PP_DIVISOR, dev_priv->savePP_DIVISOR);
+ I915_WRITE(PCH_PP_CONTROL, dev_priv->savePP_CONTROL);
+ } else {
+ I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
+ I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
+ I915_WRITE(BLC_HIST_CTL, dev_priv->saveBLC_HIST_CTL);
+ I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
+ I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
+ I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
+ I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ }
+
+ /* Display Port state */
+ if (SUPPORTS_INTEGRATED_DP(dev)) {
+ I915_WRITE(DP_B, dev_priv->saveDP_B);
+ I915_WRITE(DP_C, dev_priv->saveDP_C);
+ I915_WRITE(DP_D, dev_priv->saveDP_D);
+ }
+ /* FIXME: restore TV & SDVO state */
+
+ /* FBC info */
+ if (IS_GM45(dev)) {
+ g4x_disable_fbc(dev);
+ I915_WRITE(DPFC_CB_BASE, dev_priv->saveDPFC_CB_BASE);
+ } else {
+ i8xx_disable_fbc(dev);
+ I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
+ I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
+ I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
+ I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
+ }
+
+ /* VGA state */
+ if (IS_IGDNG(dev))
+ I915_WRITE(CPU_VGACNTRL, dev_priv->saveVGACNTRL);
+ else
+ I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
+ I915_WRITE(VGA0, dev_priv->saveVGA0);
+ I915_WRITE(VGA1, dev_priv->saveVGA1);
+ I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
+ DRM_UDELAY(150);
+
+ i915_restore_vga(dev);
+}
+
+int i915_save_state(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int i;
+
+ pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+
+ /* Render Standby */
+ if (IS_I965G(dev) && IS_MOBILE(dev))
+ dev_priv->saveRENDERSTANDBY = I915_READ(MCHBAR_RENDER_STANDBY);
+
+ /* Hardware status page */
+ dev_priv->saveHWS = I915_READ(HWS_PGA);
+
+ i915_save_display(dev);
+
+ /* Interrupt state */
+ if (IS_IGDNG(dev)) {
+ dev_priv->saveDEIER = I915_READ(DEIER);
+ dev_priv->saveDEIMR = I915_READ(DEIMR);
+ dev_priv->saveGTIER = I915_READ(GTIER);
+ dev_priv->saveGTIMR = I915_READ(GTIMR);
+ dev_priv->saveFDI_RXA_IMR = I915_READ(FDI_RXA_IMR);
+ dev_priv->saveFDI_RXB_IMR = I915_READ(FDI_RXB_IMR);
+ } else {
+ dev_priv->saveIER = I915_READ(IER);
+ dev_priv->saveIMR = I915_READ(IMR);
+ }
/* Clock gating state */
dev_priv->saveD_STATE = I915_READ(D_STATE);
- dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D);
+ dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D); /* Not sure about this */
/* Cache mode state */
dev_priv->saveCACHE_MODE_0 = I915_READ(CACHE_MODE_0);
for (i = 0; i < 8; i++)
dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
}
- i915_save_vga(dev);
return 0;
}
/* Hardware status page */
I915_WRITE(HWS_PGA, dev_priv->saveHWS);
- /* Display arbitration */
- I915_WRITE(DSPARB, dev_priv->saveDSPARB);
-
/* Fences */
if (IS_I965G(dev)) {
for (i = 0; i < 16; i++)
for (i = 0; i < 8; i++)
I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
}
-
- /* Display port ratios (must be done before clock is set) */
- if (SUPPORTS_INTEGRATED_DP(dev)) {
- I915_WRITE(PIPEA_GMCH_DATA_M, dev_priv->savePIPEA_GMCH_DATA_M);
- I915_WRITE(PIPEB_GMCH_DATA_M, dev_priv->savePIPEB_GMCH_DATA_M);
- I915_WRITE(PIPEA_GMCH_DATA_N, dev_priv->savePIPEA_GMCH_DATA_N);
- I915_WRITE(PIPEB_GMCH_DATA_N, dev_priv->savePIPEB_GMCH_DATA_N);
- I915_WRITE(PIPEA_DP_LINK_M, dev_priv->savePIPEA_DP_LINK_M);
- I915_WRITE(PIPEB_DP_LINK_M, dev_priv->savePIPEB_DP_LINK_M);
- I915_WRITE(PIPEA_DP_LINK_N, dev_priv->savePIPEA_DP_LINK_N);
- I915_WRITE(PIPEB_DP_LINK_N, dev_priv->savePIPEB_DP_LINK_N);
- }
- /* This is only meaningful in non-KMS mode */
- /* Don't restore them in KMS mode */
- i915_restore_modeset_reg(dev);
- /* Cursor state */
- I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
- I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
- I915_WRITE(CURABASE, dev_priv->saveCURABASE);
- I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
- I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
- I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
- if (!IS_I9XX(dev))
- I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
-
- /* CRT state */
- I915_WRITE(ADPA, dev_priv->saveADPA);
- /* LVDS state */
- if (IS_I965G(dev))
- I915_WRITE(BLC_PWM_CTL2, dev_priv->saveBLC_PWM_CTL2);
- if (IS_MOBILE(dev) && !IS_I830(dev))
- I915_WRITE(LVDS, dev_priv->saveLVDS);
- if (!IS_I830(dev) && !IS_845G(dev))
- I915_WRITE(PFIT_CONTROL, dev_priv->savePFIT_CONTROL);
-
- I915_WRITE(PFIT_PGM_RATIOS, dev_priv->savePFIT_PGM_RATIOS);
- I915_WRITE(BLC_PWM_CTL, dev_priv->saveBLC_PWM_CTL);
- I915_WRITE(PP_ON_DELAYS, dev_priv->savePP_ON_DELAYS);
- I915_WRITE(PP_OFF_DELAYS, dev_priv->savePP_OFF_DELAYS);
- I915_WRITE(PP_DIVISOR, dev_priv->savePP_DIVISOR);
- I915_WRITE(PP_CONTROL, dev_priv->savePP_CONTROL);
+ i915_restore_display(dev);
- /* Display Port state */
- if (SUPPORTS_INTEGRATED_DP(dev)) {
- I915_WRITE(DP_B, dev_priv->saveDP_B);
- I915_WRITE(DP_C, dev_priv->saveDP_C);
- I915_WRITE(DP_D, dev_priv->saveDP_D);
+ /* Interrupt state */
+ if (IS_IGDNG(dev)) {
+ I915_WRITE(DEIER, dev_priv->saveDEIER);
+ I915_WRITE(DEIMR, dev_priv->saveDEIMR);
+ I915_WRITE(GTIER, dev_priv->saveGTIER);
+ I915_WRITE(GTIMR, dev_priv->saveGTIMR);
+ I915_WRITE(FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
+ I915_WRITE(FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
+ } else {
+ I915_WRITE (IER, dev_priv->saveIER);
+ I915_WRITE (IMR, dev_priv->saveIMR);
}
- /* FIXME: restore TV & SDVO state */
-
- /* FBC info */
- I915_WRITE(FBC_CFB_BASE, dev_priv->saveFBC_CFB_BASE);
- I915_WRITE(FBC_LL_BASE, dev_priv->saveFBC_LL_BASE);
- I915_WRITE(FBC_CONTROL2, dev_priv->saveFBC_CONTROL2);
- I915_WRITE(FBC_CONTROL, dev_priv->saveFBC_CONTROL);
-
- /* VGA state */
- I915_WRITE(VGACNTRL, dev_priv->saveVGACNTRL);
- I915_WRITE(VGA0, dev_priv->saveVGA0);
- I915_WRITE(VGA1, dev_priv->saveVGA1);
- I915_WRITE(VGA_PD, dev_priv->saveVGA_PD);
- DRM_UDELAY(150);
/* Clock gating state */
I915_WRITE (D_STATE, dev_priv->saveD_STATE);
for (i = 0; i < 3; i++)
I915_WRITE(SWF30 + (i << 2), dev_priv->saveSWF2[i]);
- i915_restore_vga(dev);
-
return 0;
}
--- /dev/null
+#if !defined(_I915_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _I915_TRACE_H_
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#include <drm/drmP.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM i915
+#define TRACE_SYSTEM_STRING __stringify(TRACE_SYSTEM)
+#define TRACE_INCLUDE_FILE i915_trace
+
+/* object tracking */
+
+TRACE_EVENT(i915_gem_object_create,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ __field(u32, size)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ __entry->size = obj->size;
+ ),
+
+ TP_printk("obj=%p, size=%u", __entry->obj, __entry->size)
+);
+
+TRACE_EVENT(i915_gem_object_bind,
+
+ TP_PROTO(struct drm_gem_object *obj, u32 gtt_offset),
+
+ TP_ARGS(obj, gtt_offset),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ __field(u32, gtt_offset)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ __entry->gtt_offset = gtt_offset;
+ ),
+
+ TP_printk("obj=%p, gtt_offset=%08x",
+ __entry->obj, __entry->gtt_offset)
+);
+
+TRACE_EVENT(i915_gem_object_clflush,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ ),
+
+ TP_printk("obj=%p", __entry->obj)
+);
+
+TRACE_EVENT(i915_gem_object_change_domain,
+
+ TP_PROTO(struct drm_gem_object *obj, uint32_t old_read_domains, uint32_t old_write_domain),
+
+ TP_ARGS(obj, old_read_domains, old_write_domain),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ __field(u32, read_domains)
+ __field(u32, write_domain)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ __entry->read_domains = obj->read_domains | (old_read_domains << 16);
+ __entry->write_domain = obj->write_domain | (old_write_domain << 16);
+ ),
+
+ TP_printk("obj=%p, read=%04x, write=%04x",
+ __entry->obj,
+ __entry->read_domains, __entry->write_domain)
+);
+
+TRACE_EVENT(i915_gem_object_get_fence,
+
+ TP_PROTO(struct drm_gem_object *obj, int fence, int tiling_mode),
+
+ TP_ARGS(obj, fence, tiling_mode),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ __field(int, fence)
+ __field(int, tiling_mode)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ __entry->fence = fence;
+ __entry->tiling_mode = tiling_mode;
+ ),
+
+ TP_printk("obj=%p, fence=%d, tiling=%d",
+ __entry->obj, __entry->fence, __entry->tiling_mode)
+);
+
+TRACE_EVENT(i915_gem_object_unbind,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ ),
+
+ TP_printk("obj=%p", __entry->obj)
+);
+
+TRACE_EVENT(i915_gem_object_destroy,
+
+ TP_PROTO(struct drm_gem_object *obj),
+
+ TP_ARGS(obj),
+
+ TP_STRUCT__entry(
+ __field(struct drm_gem_object *, obj)
+ ),
+
+ TP_fast_assign(
+ __entry->obj = obj;
+ ),
+
+ TP_printk("obj=%p", __entry->obj)
+);
+
+/* batch tracing */
+
+TRACE_EVENT(i915_gem_request_submit,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ __entry->seqno = seqno;
+ i915_trace_irq_get(dev, seqno);
+ ),
+
+ TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_request_flush,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno,
+ u32 flush_domains, u32 invalidate_domains),
+
+ TP_ARGS(dev, seqno, flush_domains, invalidate_domains),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ __field(u32, seqno)
+ __field(u32, flush_domains)
+ __field(u32, invalidate_domains)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ __entry->seqno = seqno;
+ __entry->flush_domains = flush_domains;
+ __entry->invalidate_domains = invalidate_domains;
+ ),
+
+ TP_printk("dev=%u, seqno=%u, flush=%04x, invalidate=%04x",
+ __entry->dev, __entry->seqno,
+ __entry->flush_domains, __entry->invalidate_domains)
+);
+
+
+TRACE_EVENT(i915_gem_request_complete,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_request_retire,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_request_wait_begin,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_gem_request_wait_end,
+
+ TP_PROTO(struct drm_device *dev, u32 seqno),
+
+ TP_ARGS(dev, seqno),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ __field(u32, seqno)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ __entry->seqno = seqno;
+ ),
+
+ TP_printk("dev=%u, seqno=%u", __entry->dev, __entry->seqno)
+);
+
+TRACE_EVENT(i915_ring_wait_begin,
+
+ TP_PROTO(struct drm_device *dev),
+
+ TP_ARGS(dev),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ ),
+
+ TP_printk("dev=%u", __entry->dev)
+);
+
+TRACE_EVENT(i915_ring_wait_end,
+
+ TP_PROTO(struct drm_device *dev),
+
+ TP_ARGS(dev),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ ),
+
+ TP_printk("dev=%u", __entry->dev)
+);
+
+#endif /* _I915_TRACE_H_ */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH ../../drivers/gpu/drm/i915
+#include <trace/define_trace.h>
--- /dev/null
+/*
+ * Copyright © 2009 Intel Corporation
+ *
+ * Authors:
+ * Chris Wilson <chris@chris-wilson.co.uk>
+ */
+
+#include "i915_drv.h"
+
+#define CREATE_TRACE_POINTS
+#include "i915_trace.h"
if (IS_I85X(dev_priv->dev))
dev_priv->lvds_ssc_freq =
general->ssc_freq ? 66 : 48;
+ else if (IS_IGDNG(dev_priv->dev))
+ dev_priv->lvds_ssc_freq =
+ general->ssc_freq ? 100 : 120;
else
dev_priv->lvds_ssc_freq =
general->ssc_freq ? 100 : 96;
struct drm_device *dev = dev_priv->dev;
struct bdb_driver_features *driver;
- /* set default for chips without eDP */
- if (!SUPPORTS_EDP(dev)) {
- dev_priv->edp_support = 0;
- return;
- }
-
driver = find_section(bdb, BDB_DRIVER_FEATURES);
if (!driver)
return;
- if (driver->lvds_config == BDB_DRIVER_FEATURE_EDP)
+ if (driver && SUPPORTS_EDP(dev) &&
+ driver->lvds_config == BDB_DRIVER_FEATURE_EDP) {
dev_priv->edp_support = 1;
+ } else {
+ dev_priv->edp_support = 0;
+ }
- if (driver->dual_frequency)
+ if (driver && driver->dual_frequency)
dev_priv->render_reclock_avail = true;
}
{
struct drm_device *dev = connector->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 adpa, temp;
+ u32 adpa;
bool ret;
- temp = adpa = I915_READ(PCH_ADPA);
-
- adpa &= ~ADPA_DAC_ENABLE;
- I915_WRITE(PCH_ADPA, adpa);
+ adpa = I915_READ(PCH_ADPA);
adpa &= ~ADPA_CRT_HOTPLUG_MASK;
else
ret = false;
- /* restore origin register */
- I915_WRITE(PCH_ADPA, temp);
return ret;
}
* Eric Anholt <eric@anholt.net>
*/
+#include <linux/module.h>
+#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include "drmP.h"
refclk, best_clock);
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+ if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
LVDS_CLKB_POWER_UP)
clock.p2 = limit->p2.p2_fast;
else
clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2);
clock.p = (clock.p1 * clock.p2);
clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p;
+ clock.vco = 0;
memcpy(best_clock, &clock, sizeof(intel_clock_t));
return true;
}
mdelay(20);
}
+/* Parameters have changed, update FBC info */
+static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int plane, i;
+ u32 fbc_ctl, fbc_ctl2;
+
+ dev_priv->cfb_pitch = dev_priv->cfb_size / FBC_LL_SIZE;
+
+ if (fb->pitch < dev_priv->cfb_pitch)
+ dev_priv->cfb_pitch = fb->pitch;
+
+ /* FBC_CTL wants 64B units */
+ dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
+ dev_priv->cfb_fence = obj_priv->fence_reg;
+ dev_priv->cfb_plane = intel_crtc->plane;
+ plane = dev_priv->cfb_plane == 0 ? FBC_CTL_PLANEA : FBC_CTL_PLANEB;
+
+ /* Clear old tags */
+ for (i = 0; i < (FBC_LL_SIZE / 32) + 1; i++)
+ I915_WRITE(FBC_TAG + (i * 4), 0);
+
+ /* Set it up... */
+ fbc_ctl2 = FBC_CTL_FENCE_DBL | FBC_CTL_IDLE_IMM | plane;
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ fbc_ctl2 |= FBC_CTL_CPU_FENCE;
+ I915_WRITE(FBC_CONTROL2, fbc_ctl2);
+ I915_WRITE(FBC_FENCE_OFF, crtc->y);
+
+ /* enable it... */
+ fbc_ctl = FBC_CTL_EN | FBC_CTL_PERIODIC;
+ fbc_ctl |= (dev_priv->cfb_pitch & 0xff) << FBC_CTL_STRIDE_SHIFT;
+ fbc_ctl |= (interval & 0x2fff) << FBC_CTL_INTERVAL_SHIFT;
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ fbc_ctl |= dev_priv->cfb_fence;
+ I915_WRITE(FBC_CONTROL, fbc_ctl);
+
+ DRM_DEBUG("enabled FBC, pitch %ld, yoff %d, plane %d, ",
+ dev_priv->cfb_pitch, crtc->y, dev_priv->cfb_plane);
+}
+
+void i8xx_disable_fbc(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 fbc_ctl;
+
+ if (!I915_HAS_FBC(dev))
+ return;
+
+ /* Disable compression */
+ fbc_ctl = I915_READ(FBC_CONTROL);
+ fbc_ctl &= ~FBC_CTL_EN;
+ I915_WRITE(FBC_CONTROL, fbc_ctl);
+
+ /* Wait for compressing bit to clear */
+ while (I915_READ(FBC_STATUS) & FBC_STAT_COMPRESSING)
+ ; /* nothing */
+
+ intel_wait_for_vblank(dev);
+
+ DRM_DEBUG("disabled FBC\n");
+}
+
+static bool i8xx_fbc_enabled(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ return I915_READ(FBC_CONTROL) & FBC_CTL_EN;
+}
+
+static void g4x_enable_fbc(struct drm_crtc *crtc, unsigned long interval)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj_priv = intel_fb->obj->driver_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int plane = (intel_crtc->plane == 0 ? DPFC_CTL_PLANEA :
+ DPFC_CTL_PLANEB);
+ unsigned long stall_watermark = 200;
+ u32 dpfc_ctl;
+
+ dev_priv->cfb_pitch = (dev_priv->cfb_pitch / 64) - 1;
+ dev_priv->cfb_fence = obj_priv->fence_reg;
+ dev_priv->cfb_plane = intel_crtc->plane;
+
+ dpfc_ctl = plane | DPFC_SR_EN | DPFC_CTL_LIMIT_1X;
+ if (obj_priv->tiling_mode != I915_TILING_NONE) {
+ dpfc_ctl |= DPFC_CTL_FENCE_EN | dev_priv->cfb_fence;
+ I915_WRITE(DPFC_CHICKEN, DPFC_HT_MODIFY);
+ } else {
+ I915_WRITE(DPFC_CHICKEN, ~DPFC_HT_MODIFY);
+ }
+
+ I915_WRITE(DPFC_CONTROL, dpfc_ctl);
+ I915_WRITE(DPFC_RECOMP_CTL, DPFC_RECOMP_STALL_EN |
+ (stall_watermark << DPFC_RECOMP_STALL_WM_SHIFT) |
+ (interval << DPFC_RECOMP_TIMER_COUNT_SHIFT));
+ I915_WRITE(DPFC_FENCE_YOFF, crtc->y);
+
+ /* enable it... */
+ I915_WRITE(DPFC_CONTROL, I915_READ(DPFC_CONTROL) | DPFC_CTL_EN);
+
+ DRM_DEBUG("enabled fbc on plane %d\n", intel_crtc->plane);
+}
+
+void g4x_disable_fbc(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 dpfc_ctl;
+
+ /* Disable compression */
+ dpfc_ctl = I915_READ(DPFC_CONTROL);
+ dpfc_ctl &= ~DPFC_CTL_EN;
+ I915_WRITE(DPFC_CONTROL, dpfc_ctl);
+ intel_wait_for_vblank(dev);
+
+ DRM_DEBUG("disabled FBC\n");
+}
+
+static bool g4x_fbc_enabled(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ return I915_READ(DPFC_CONTROL) & DPFC_CTL_EN;
+}
+
+/**
+ * intel_update_fbc - enable/disable FBC as needed
+ * @crtc: CRTC to point the compressor at
+ * @mode: mode in use
+ *
+ * Set up the framebuffer compression hardware at mode set time. We
+ * enable it if possible:
+ * - plane A only (on pre-965)
+ * - no pixel mulitply/line duplication
+ * - no alpha buffer discard
+ * - no dual wide
+ * - framebuffer <= 2048 in width, 1536 in height
+ *
+ * We can't assume that any compression will take place (worst case),
+ * so the compressed buffer has to be the same size as the uncompressed
+ * one. It also must reside (along with the line length buffer) in
+ * stolen memory.
+ *
+ * We need to enable/disable FBC on a global basis.
+ */
+static void intel_update_fbc(struct drm_crtc *crtc,
+ struct drm_display_mode *mode)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct drm_framebuffer *fb = crtc->fb;
+ struct intel_framebuffer *intel_fb;
+ struct drm_i915_gem_object *obj_priv;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int plane = intel_crtc->plane;
+
+ if (!i915_powersave)
+ return;
+
+ if (!dev_priv->display.fbc_enabled ||
+ !dev_priv->display.enable_fbc ||
+ !dev_priv->display.disable_fbc)
+ return;
+
+ if (!crtc->fb)
+ return;
+
+ intel_fb = to_intel_framebuffer(fb);
+ obj_priv = intel_fb->obj->driver_private;
+
+ /*
+ * If FBC is already on, we just have to verify that we can
+ * keep it that way...
+ * Need to disable if:
+ * - changing FBC params (stride, fence, mode)
+ * - new fb is too large to fit in compressed buffer
+ * - going to an unsupported config (interlace, pixel multiply, etc.)
+ */
+ if (intel_fb->obj->size > dev_priv->cfb_size) {
+ DRM_DEBUG("framebuffer too large, disabling compression\n");
+ goto out_disable;
+ }
+ if ((mode->flags & DRM_MODE_FLAG_INTERLACE) ||
+ (mode->flags & DRM_MODE_FLAG_DBLSCAN)) {
+ DRM_DEBUG("mode incompatible with compression, disabling\n");
+ goto out_disable;
+ }
+ if ((mode->hdisplay > 2048) ||
+ (mode->vdisplay > 1536)) {
+ DRM_DEBUG("mode too large for compression, disabling\n");
+ goto out_disable;
+ }
+ if ((IS_I915GM(dev) || IS_I945GM(dev)) && plane != 0) {
+ DRM_DEBUG("plane not 0, disabling compression\n");
+ goto out_disable;
+ }
+ if (obj_priv->tiling_mode != I915_TILING_X) {
+ DRM_DEBUG("framebuffer not tiled, disabling compression\n");
+ goto out_disable;
+ }
+
+ if (dev_priv->display.fbc_enabled(crtc)) {
+ /* We can re-enable it in this case, but need to update pitch */
+ if (fb->pitch > dev_priv->cfb_pitch)
+ dev_priv->display.disable_fbc(dev);
+ if (obj_priv->fence_reg != dev_priv->cfb_fence)
+ dev_priv->display.disable_fbc(dev);
+ if (plane != dev_priv->cfb_plane)
+ dev_priv->display.disable_fbc(dev);
+ }
+
+ if (!dev_priv->display.fbc_enabled(crtc)) {
+ /* Now try to turn it back on if possible */
+ dev_priv->display.enable_fbc(crtc, 500);
+ }
+
+ return;
+
+out_disable:
+ DRM_DEBUG("unsupported config, disabling FBC\n");
+ /* Multiple disables should be harmless */
+ if (dev_priv->display.fbc_enabled(crtc))
+ dev_priv->display.disable_fbc(dev);
+}
+
static int
intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
struct drm_i915_gem_object *obj_priv;
struct drm_gem_object *obj;
int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
unsigned long Start, Offset;
- int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
- int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
- int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
- int dsptileoff = (pipe == 0 ? DSPATILEOFF : DSPBTILEOFF);
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR);
+ int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF);
+ int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF);
+ int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr, alignment;
int ret;
return 0;
}
- switch (pipe) {
+ switch (plane) {
case 0:
case 1:
break;
default:
- DRM_ERROR("Can't update pipe %d in SAREA\n", pipe);
+ DRM_ERROR("Can't update plane %d in SAREA\n", plane);
return -EINVAL;
}
return ret;
}
- /* Pre-i965 needs to install a fence for tiled scan-out */
- if (!IS_I965G(dev) &&
- obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+ /* Install a fence for tiled scan-out. Pre-i965 always needs a fence,
+ * whereas 965+ only requires a fence if using framebuffer compression.
+ * For simplicity, we always install a fence as the cost is not that onerous.
+ */
+ if (obj_priv->fence_reg == I915_FENCE_REG_NONE &&
obj_priv->tiling_mode != I915_TILING_NONE) {
ret = i915_gem_object_get_fence_reg(obj);
if (ret != 0) {
I915_READ(dspbase);
}
+ if ((IS_I965G(dev) || plane == 0))
+ intel_update_fbc(crtc, &crtc->mode);
+
intel_wait_for_vblank(dev);
if (old_fb) {
int transconf_reg = (pipe == 0) ? TRANSACONF : TRANSBCONF;
int pf_ctl_reg = (pipe == 0) ? PFA_CTL_1 : PFB_CTL_1;
int pf_win_size = (pipe == 0) ? PFA_WIN_SZ : PFB_WIN_SZ;
+ int pf_win_pos = (pipe == 0) ? PFA_WIN_POS : PFB_WIN_POS;
int cpu_htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int cpu_hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int cpu_hsync_reg = (pipe == 0) ? HSYNC_A : HSYNC_B;
}
}
+ /* Enable panel fitting for LVDS */
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
+ temp = I915_READ(pf_ctl_reg);
+ I915_WRITE(pf_ctl_reg, temp | PF_ENABLE | PF_FILTER_MED_3x3);
+
+ /* currently full aspect */
+ I915_WRITE(pf_win_pos, 0);
+
+ I915_WRITE(pf_win_size,
+ (dev_priv->panel_fixed_mode->hdisplay << 16) |
+ (dev_priv->panel_fixed_mode->vdisplay));
+ }
+
/* Enable CPU pipe */
temp = I915_READ(pipeconf_reg);
if ((temp & PIPEACONF_ENABLE) == 0) {
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
- int dspbase_reg = (pipe == 0) ? DSPAADDR : DSPBADDR;
+ int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
+ int dspbase_reg = (plane == 0) ? DSPAADDR : DSPBADDR;
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
u32 temp;
case DRM_MODE_DPMS_ON:
case DRM_MODE_DPMS_STANDBY:
case DRM_MODE_DPMS_SUSPEND:
+ intel_update_watermarks(dev);
+
/* Enable the DPLL */
temp = I915_READ(dpll_reg);
if ((temp & DPLL_VCO_ENABLE) == 0) {
intel_crtc_load_lut(crtc);
+ if ((IS_I965G(dev) || plane == 0))
+ intel_update_fbc(crtc, &crtc->mode);
+
/* Give the overlay scaler a chance to enable if it's on this pipe */
//intel_crtc_dpms_video(crtc, true); TODO
- intel_update_watermarks(dev);
break;
case DRM_MODE_DPMS_OFF:
intel_update_watermarks(dev);
/* Give the overlay scaler a chance to disable if it's on this pipe */
//intel_crtc_dpms_video(crtc, FALSE); TODO
+ if (dev_priv->cfb_plane == plane &&
+ dev_priv->display.disable_fbc)
+ dev_priv->display.disable_fbc(dev);
+
/* Disable the VGA plane that we never use */
i915_disable_vga(dev);
static void intel_crtc_dpms(struct drm_crtc *crtc, int mode)
{
struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
bool enabled;
- if (IS_IGDNG(dev))
- igdng_crtc_dpms(crtc, mode);
- else
- i9xx_crtc_dpms(crtc, mode);
+ dev_priv->display.dpms(crtc, mode);
intel_crtc->dpms_mode = mode;
return true;
}
+static int i945_get_display_clock_speed(struct drm_device *dev)
+{
+ return 400000;
+}
-/** Returns the core display clock speed for i830 - i945 */
-static int intel_get_core_clock_speed(struct drm_device *dev)
+static int i915_get_display_clock_speed(struct drm_device *dev)
{
+ return 333000;
+}
- /* Core clock values taken from the published datasheets.
- * The 830 may go up to 166 Mhz, which we should check.
- */
- if (IS_I945G(dev))
- return 400000;
- else if (IS_I915G(dev))
- return 333000;
- else if (IS_I945GM(dev) || IS_845G(dev) || IS_IGDGM(dev))
- return 200000;
- else if (IS_I915GM(dev)) {
- u16 gcfgc = 0;
+static int i9xx_misc_get_display_clock_speed(struct drm_device *dev)
+{
+ return 200000;
+}
- pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
+static int i915gm_get_display_clock_speed(struct drm_device *dev)
+{
+ u16 gcfgc = 0;
- if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
- return 133000;
- else {
- switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
- case GC_DISPLAY_CLOCK_333_MHZ:
- return 333000;
- default:
- case GC_DISPLAY_CLOCK_190_200_MHZ:
- return 190000;
- }
- }
- } else if (IS_I865G(dev))
- return 266000;
- else if (IS_I855(dev)) {
- u16 hpllcc = 0;
- /* Assume that the hardware is in the high speed state. This
- * should be the default.
- */
- switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
- case GC_CLOCK_133_200:
- case GC_CLOCK_100_200:
- return 200000;
- case GC_CLOCK_166_250:
- return 250000;
- case GC_CLOCK_100_133:
- return 133000;
+ pci_read_config_word(dev->pdev, GCFGC, &gcfgc);
+
+ if (gcfgc & GC_LOW_FREQUENCY_ENABLE)
+ return 133000;
+ else {
+ switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
+ case GC_DISPLAY_CLOCK_333_MHZ:
+ return 333000;
+ default:
+ case GC_DISPLAY_CLOCK_190_200_MHZ:
+ return 190000;
}
- } else /* 852, 830 */
+ }
+}
+
+static int i865_get_display_clock_speed(struct drm_device *dev)
+{
+ return 266000;
+}
+
+static int i855_get_display_clock_speed(struct drm_device *dev)
+{
+ u16 hpllcc = 0;
+ /* Assume that the hardware is in the high speed state. This
+ * should be the default.
+ */
+ switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
+ case GC_CLOCK_133_200:
+ case GC_CLOCK_100_200:
+ return 200000;
+ case GC_CLOCK_166_250:
+ return 250000;
+ case GC_CLOCK_100_133:
return 133000;
+ }
- return 0; /* Silence gcc warning */
+ /* Shouldn't happen */
+ return 0;
+}
+
+static int i830_get_display_clock_speed(struct drm_device *dev)
+{
+ return 133000;
}
/**
#define LINK_N 0x80000
static void
-igdng_compute_m_n(int bytes_per_pixel, int nlanes,
+igdng_compute_m_n(int bits_per_pixel, int nlanes,
int pixel_clock, int link_clock,
struct fdi_m_n *m_n)
{
temp = (u64) DATA_N * pixel_clock;
temp = div_u64(temp, link_clock);
- m_n->gmch_m = div_u64(temp * bytes_per_pixel, nlanes);
+ m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
+ m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
m_n->gmch_n = DATA_N;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
IGD_CURSOR_GUARD_WM,
IGD_FIFO_LINE_SIZE
};
+static struct intel_watermark_params g4x_wm_info = {
+ G4X_FIFO_SIZE,
+ G4X_MAX_WM,
+ G4X_MAX_WM,
+ 2,
+ G4X_FIFO_LINE_SIZE,
+};
static struct intel_watermark_params i945_wm_info = {
I945_FIFO_SIZE,
I915_MAX_WM,
{
long entries_required, wm_size;
- entries_required = (clock_in_khz * pixel_size * latency_ns) / 1000000;
+ /*
+ * Note: we need to make sure we don't overflow for various clock &
+ * latency values.
+ * clocks go from a few thousand to several hundred thousand.
+ * latency is usually a few thousand
+ */
+ entries_required = ((clock_in_khz / 1000) * pixel_size * latency_ns) /
+ 1000;
entries_required /= wm->cacheline_size;
DRM_DEBUG("FIFO entries required for mode: %d\n", entries_required);
for (i = 0; i < ARRAY_SIZE(cxsr_latency_table); i++) {
latency = &cxsr_latency_table[i];
if (is_desktop == latency->is_desktop &&
- fsb == latency->fsb_freq && mem == latency->mem_freq)
- break;
+ fsb == latency->fsb_freq && mem == latency->mem_freq)
+ return latency;
}
- if (i >= ARRAY_SIZE(cxsr_latency_table)) {
- DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
- return NULL;
- }
- return latency;
+
+ DRM_DEBUG("Unknown FSB/MEM found, disable CxSR\n");
+
+ return NULL;
}
static void igd_disable_cxsr(struct drm_device *dev)
*/
const static int latency_ns = 5000;
-static int intel_get_fifo_size(struct drm_device *dev, int plane)
+static int i9xx_get_fifo_size(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t dsparb = I915_READ(DSPARB);
int size;
- if (IS_I9XX(dev)) {
- if (plane == 0)
- size = dsparb & 0x7f;
- else
- size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
- (dsparb & 0x7f);
- } else if (IS_I85X(dev)) {
- if (plane == 0)
- size = dsparb & 0x1ff;
- else
- size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
- (dsparb & 0x1ff);
- size >>= 1; /* Convert to cachelines */
- } else if (IS_845G(dev)) {
+ if (plane == 0)
size = dsparb & 0x7f;
- size >>= 2; /* Convert to cachelines */
- } else {
- size = dsparb & 0x7f;
- size >>= 1; /* Convert to cachelines */
- }
+ else
+ size = ((dsparb >> DSPARB_CSTART_SHIFT) & 0x7f) -
+ (dsparb & 0x7f);
DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
size);
return size;
}
-static void g4x_update_wm(struct drm_device *dev)
+static int i85x_get_fifo_size(struct drm_device *dev, int plane)
{
struct drm_i915_private *dev_priv = dev->dev_private;
- u32 fw_blc_self = I915_READ(FW_BLC_SELF);
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
- if (i915_powersave)
- fw_blc_self |= FW_BLC_SELF_EN;
+ if (plane == 0)
+ size = dsparb & 0x1ff;
else
- fw_blc_self &= ~FW_BLC_SELF_EN;
- I915_WRITE(FW_BLC_SELF, fw_blc_self);
+ size = ((dsparb >> DSPARB_BEND_SHIFT) & 0x1ff) -
+ (dsparb & 0x1ff);
+ size >>= 1; /* Convert to cachelines */
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
+}
+
+static int i845_get_fifo_size(struct drm_device *dev, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
+
+ size = dsparb & 0x7f;
+ size >>= 2; /* Convert to cachelines */
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
}
-static void i965_update_wm(struct drm_device *dev)
+static int i830_get_fifo_size(struct drm_device *dev, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t dsparb = I915_READ(DSPARB);
+ int size;
+
+ size = dsparb & 0x7f;
+ size >>= 1; /* Convert to cachelines */
+
+ DRM_DEBUG("FIFO size - (0x%08x) %s: %d\n", dsparb, plane ? "B" : "A",
+ size);
+
+ return size;
+}
+
+static void g4x_update_wm(struct drm_device *dev, int planea_clock,
+ int planeb_clock, int sr_hdisplay, int pixel_size)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int total_size, cacheline_size;
+ int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr;
+ struct intel_watermark_params planea_params, planeb_params;
+ unsigned long line_time_us;
+ int sr_clock, sr_entries = 0, entries_required;
+
+ /* Create copies of the base settings for each pipe */
+ planea_params = planeb_params = g4x_wm_info;
+
+ /* Grab a couple of global values before we overwrite them */
+ total_size = planea_params.fifo_size;
+ cacheline_size = planea_params.cacheline_size;
+
+ /*
+ * Note: we need to make sure we don't overflow for various clock &
+ * latency values.
+ * clocks go from a few thousand to several hundred thousand.
+ * latency is usually a few thousand
+ */
+ entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) /
+ 1000;
+ entries_required /= G4X_FIFO_LINE_SIZE;
+ planea_wm = entries_required + planea_params.guard_size;
+
+ entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) /
+ 1000;
+ entries_required /= G4X_FIFO_LINE_SIZE;
+ planeb_wm = entries_required + planeb_params.guard_size;
+
+ cursora_wm = cursorb_wm = 16;
+ cursor_sr = 32;
+
+ DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm);
+
+ /* Calc sr entries for one plane configs */
+ if (sr_hdisplay && (!planea_clock || !planeb_clock)) {
+ /* self-refresh has much higher latency */
+ const static int sr_latency_ns = 12000;
+
+ sr_clock = planea_clock ? planea_clock : planeb_clock;
+ line_time_us = ((sr_hdisplay * 1000) / sr_clock);
+
+ /* Use ns/us then divide to preserve precision */
+ sr_entries = (((sr_latency_ns / line_time_us) + 1) *
+ pixel_size * sr_hdisplay) / 1000;
+ sr_entries = roundup(sr_entries / cacheline_size, 1);
+ DRM_DEBUG("self-refresh entries: %d\n", sr_entries);
+ I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN);
+ }
+
+ DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n",
+ planea_wm, planeb_wm, sr_entries);
+
+ planea_wm &= 0x3f;
+ planeb_wm &= 0x3f;
+
+ I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) |
+ (cursorb_wm << DSPFW_CURSORB_SHIFT) |
+ (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm);
+ I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) |
+ (cursora_wm << DSPFW_CURSORA_SHIFT));
+ /* HPLL off in SR has some issues on G4x... disable it */
+ I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) |
+ (cursor_sr << DSPFW_CURSOR_SR_SHIFT));
+}
+
+static void i965_update_wm(struct drm_device *dev, int unused, int unused2,
+ int unused3, int unused4)
{
struct drm_i915_private *dev_priv = dev->dev_private;
cacheline_size = planea_params.cacheline_size;
/* Update per-plane FIFO sizes */
- planea_params.fifo_size = intel_get_fifo_size(dev, 0);
- planeb_params.fifo_size = intel_get_fifo_size(dev, 1);
+ planea_params.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
+ planeb_params.fifo_size = dev_priv->display.get_fifo_size(dev, 1);
planea_wm = intel_calculate_wm(planea_clock, &planea_params,
pixel_size, latency_ns);
I915_WRITE(FW_BLC2, fwater_hi);
}
-static void i830_update_wm(struct drm_device *dev, int planea_clock,
- int pixel_size)
+static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused,
+ int unused2, int pixel_size)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff;
int planea_wm;
- i830_wm_info.fifo_size = intel_get_fifo_size(dev, 0);
+ i830_wm_info.fifo_size = dev_priv->display.get_fifo_size(dev, 0);
planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info,
pixel_size, latency_ns);
*/
static void intel_update_watermarks(struct drm_device *dev)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
struct intel_crtc *intel_crtc;
int sr_hdisplay = 0;
unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0;
int enabled = 0, pixel_size = 0;
+ if (!dev_priv->display.update_wm)
+ return;
+
/* Get the clock config from both planes */
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
intel_crtc = to_intel_crtc(crtc);
else if (IS_IGD(dev))
igd_disable_cxsr(dev);
- if (IS_G4X(dev))
- g4x_update_wm(dev);
- else if (IS_I965G(dev))
- i965_update_wm(dev);
- else if (IS_I9XX(dev) || IS_MOBILE(dev))
- i9xx_update_wm(dev, planea_clock, planeb_clock, sr_hdisplay,
- pixel_size);
- else
- i830_update_wm(dev, planea_clock, pixel_size);
+ dev_priv->display.update_wm(dev, planea_clock, planeb_clock,
+ sr_hdisplay, pixel_size);
}
static int intel_crtc_mode_set(struct drm_crtc *crtc,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
+ int plane = intel_crtc->plane;
int fp_reg = (pipe == 0) ? FPA0 : FPB0;
int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B;
int dpll_md_reg = (intel_crtc->pipe == 0) ? DPLL_A_MD : DPLL_B_MD;
- int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
+ int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
int pipeconf_reg = (pipe == 0) ? PIPEACONF : PIPEBCONF;
int htot_reg = (pipe == 0) ? HTOTAL_A : HTOTAL_B;
int hblank_reg = (pipe == 0) ? HBLANK_A : HBLANK_B;
int vtot_reg = (pipe == 0) ? VTOTAL_A : VTOTAL_B;
int vblank_reg = (pipe == 0) ? VBLANK_A : VBLANK_B;
int vsync_reg = (pipe == 0) ? VSYNC_A : VSYNC_B;
- int dspsize_reg = (pipe == 0) ? DSPASIZE : DSPBSIZE;
- int dsppos_reg = (pipe == 0) ? DSPAPOS : DSPBPOS;
+ int dspsize_reg = (plane == 0) ? DSPASIZE : DSPBSIZE;
+ int dsppos_reg = (plane == 0) ? DSPAPOS : DSPBPOS;
int pipesrc_reg = (pipe == 0) ? PIPEASRC : PIPEBSRC;
int refclk, num_outputs = 0;
intel_clock_t clock, reduced_clock;
/* FDI link */
if (IS_IGDNG(dev)) {
- int lane, link_bw;
+ int lane, link_bw, bpp;
/* eDP doesn't require FDI link, so just set DP M/N
according to current link config */
if (is_edp) {
lane = 4;
link_bw = 270000;
}
- igdng_compute_m_n(3, lane, target_clock,
+
+ /* determine panel color depth */
+ temp = I915_READ(pipeconf_reg);
+
+ switch (temp & PIPE_BPC_MASK) {
+ case PIPE_8BPC:
+ bpp = 24;
+ break;
+ case PIPE_10BPC:
+ bpp = 30;
+ break;
+ case PIPE_6BPC:
+ bpp = 18;
+ break;
+ case PIPE_12BPC:
+ bpp = 36;
+ break;
+ default:
+ DRM_ERROR("unknown pipe bpc value\n");
+ bpp = 24;
+ }
+
+ igdng_compute_m_n(bpp, lane, target_clock,
link_bw, &m_n);
}
+ /* Ironlake: try to setup display ref clock before DPLL
+ * enabling. This is only under driver's control after
+ * PCH B stepping, previous chipset stepping should be
+ * ignoring this setting.
+ */
+ if (IS_IGDNG(dev)) {
+ temp = I915_READ(PCH_DREF_CONTROL);
+ /* Always enable nonspread source */
+ temp &= ~DREF_NONSPREAD_SOURCE_MASK;
+ temp |= DREF_NONSPREAD_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ temp &= ~DREF_SSC_SOURCE_MASK;
+ temp |= DREF_SSC_SOURCE_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ udelay(200);
+
+ if (is_edp) {
+ if (dev_priv->lvds_use_ssc) {
+ temp |= DREF_SSC1_ENABLE;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+
+ udelay(200);
+
+ temp &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
+ temp |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ } else {
+ temp |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
+ I915_WRITE(PCH_DREF_CONTROL, temp);
+ POSTING_READ(PCH_DREF_CONTROL);
+ }
+ }
+ }
+
if (IS_IGD(dev)) {
fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
if (has_reduced_clock)
enable color space conversion */
if (!IS_IGDNG(dev)) {
if (pipe == 0)
- dspcntr |= DISPPLANE_SEL_PIPE_A;
+ dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
else
dspcntr |= DISPPLANE_SEL_PIPE_B;
}
* XXX: No double-wide on 915GM pipe B. Is that the only reason for the
* pipe == 0 check?
*/
- if (mode->clock > intel_get_core_clock_speed(dev) * 9 / 10)
+ if (mode->clock >
+ dev_priv->display.get_display_clock_speed(dev) * 9 / 10)
pipeconf |= PIPEACONF_DOUBLE_WIDE;
else
pipeconf &= ~PIPEACONF_DOUBLE_WIDE;
lvds = I915_READ(lvds_reg);
lvds |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP | LVDS_PIPEB_SELECT;
+ /* set the corresponsding LVDS_BORDER bit */
+ lvds |= dev_priv->lvds_border_bits;
/* Set the B0-B3 data pairs corresponding to whether we're going to
* set the DPLLs for dual-channel mode or not.
*/
udelay(150);
if (IS_I965G(dev) && !IS_IGDNG(dev)) {
- sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
- I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
+ if (is_sdvo) {
+ sdvo_pixel_multiply = adjusted_mode->clock / mode->clock;
+ I915_WRITE(dpll_md_reg, (0 << DPLL_MD_UDI_DIVIDER_SHIFT) |
((sdvo_pixel_multiply - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT));
+ } else
+ I915_WRITE(dpll_md_reg, 0);
} else {
/* write it again -- the BIOS does, after all */
I915_WRITE(dpll_reg, dpll);
/* Flush the plane changes */
ret = intel_pipe_set_base(crtc, x, y, old_fb);
+ if ((IS_I965G(dev) || plane == 0))
+ intel_update_fbc(crtc, &crtc->mode);
+
intel_update_watermarks(dev);
drm_vblank_post_modeset(dev, pipe);
i915_gem_object_unpin(intel_crtc->cursor_bo);
drm_gem_object_unreference(intel_crtc->cursor_bo);
}
+
mutex_unlock(&dev->struct_mutex);
intel_crtc->cursor_addr = addr;
intel_crtc->lut_b[regno] = blue >> 8;
}
+void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno)
+{
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+
+ *red = intel_crtc->lut_r[regno] << 8;
+ *green = intel_crtc->lut_g[regno] << 8;
+ *blue = intel_crtc->lut_b[regno] << 8;
+}
+
static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, uint32_t size)
{
.mode_set_base = intel_pipe_set_base,
.prepare = intel_crtc_prepare,
.commit = intel_crtc_commit,
+ .load_lut = intel_crtc_load_lut,
};
static const struct drm_crtc_funcs intel_crtc_funcs = {
intel_crtc->lut_b[i] = i;
}
+ /* Swap pipes & planes for FBC on pre-965 */
+ intel_crtc->pipe = pipe;
+ intel_crtc->plane = pipe;
+ if (IS_MOBILE(dev) && (IS_I9XX(dev) && !IS_I965G(dev))) {
+ DRM_DEBUG("swapping pipes & planes for FBC\n");
+ intel_crtc->plane = ((pipe == 0) ? 1 : 0);
+ }
+
intel_crtc->cursor_addr = 0;
intel_crtc->dpms_mode = DRM_MODE_DPMS_OFF;
drm_crtc_helper_add(&intel_crtc->base, &intel_helper_funcs);
* Disable clock gating reported to work incorrectly according to the
* specs, but enable as much else as we can.
*/
- if (IS_G4X(dev)) {
+ if (IS_IGDNG(dev)) {
+ return;
+ } else if (IS_G4X(dev)) {
uint32_t dspclk_gate;
I915_WRITE(RENCLK_GATE_D1, 0);
I915_WRITE(RENCLK_GATE_D2, VF_UNIT_CLOCK_GATE_DISABLE |
}
}
+/* Set up chip specific display functions */
+static void intel_init_display(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* We always want a DPMS function */
+ if (IS_IGDNG(dev))
+ dev_priv->display.dpms = igdng_crtc_dpms;
+ else
+ dev_priv->display.dpms = i9xx_crtc_dpms;
+
+ /* Only mobile has FBC, leave pointers NULL for other chips */
+ if (IS_MOBILE(dev)) {
+ if (IS_GM45(dev)) {
+ dev_priv->display.fbc_enabled = g4x_fbc_enabled;
+ dev_priv->display.enable_fbc = g4x_enable_fbc;
+ dev_priv->display.disable_fbc = g4x_disable_fbc;
+ } else if (IS_I965GM(dev) || IS_I945GM(dev) || IS_I915GM(dev)) {
+ dev_priv->display.fbc_enabled = i8xx_fbc_enabled;
+ dev_priv->display.enable_fbc = i8xx_enable_fbc;
+ dev_priv->display.disable_fbc = i8xx_disable_fbc;
+ }
+ /* 855GM needs testing */
+ }
+
+ /* Returns the core display clock speed */
+ if (IS_I945G(dev))
+ dev_priv->display.get_display_clock_speed =
+ i945_get_display_clock_speed;
+ else if (IS_I915G(dev))
+ dev_priv->display.get_display_clock_speed =
+ i915_get_display_clock_speed;
+ else if (IS_I945GM(dev) || IS_845G(dev) || IS_IGDGM(dev))
+ dev_priv->display.get_display_clock_speed =
+ i9xx_misc_get_display_clock_speed;
+ else if (IS_I915GM(dev))
+ dev_priv->display.get_display_clock_speed =
+ i915gm_get_display_clock_speed;
+ else if (IS_I865G(dev))
+ dev_priv->display.get_display_clock_speed =
+ i865_get_display_clock_speed;
+ else if (IS_I855(dev))
+ dev_priv->display.get_display_clock_speed =
+ i855_get_display_clock_speed;
+ else /* 852, 830 */
+ dev_priv->display.get_display_clock_speed =
+ i830_get_display_clock_speed;
+
+ /* For FIFO watermark updates */
+ if (IS_IGDNG(dev))
+ dev_priv->display.update_wm = NULL;
+ else if (IS_G4X(dev))
+ dev_priv->display.update_wm = g4x_update_wm;
+ else if (IS_I965G(dev))
+ dev_priv->display.update_wm = i965_update_wm;
+ else if (IS_I9XX(dev) || IS_MOBILE(dev)) {
+ dev_priv->display.update_wm = i9xx_update_wm;
+ dev_priv->display.get_fifo_size = i9xx_get_fifo_size;
+ } else {
+ if (IS_I85X(dev))
+ dev_priv->display.get_fifo_size = i85x_get_fifo_size;
+ else if (IS_845G(dev))
+ dev_priv->display.get_fifo_size = i845_get_fifo_size;
+ else
+ dev_priv->display.get_fifo_size = i830_get_fifo_size;
+ dev_priv->display.update_wm = i830_update_wm;
+ }
+}
+
void intel_modeset_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
dev->mode_config.funcs = (void *)&intel_mode_funcs;
+ intel_init_display(dev);
+
if (IS_I965G(dev)) {
dev->mode_config.max_width = 8192;
dev->mode_config.max_height = 8192;
mutex_unlock(&dev->struct_mutex);
+ if (dev_priv->display.disable_fbc)
+ dev_priv->display.disable_fbc(dev);
+
drm_mode_config_cleanup(dev);
}
{
struct intel_dp_priv *dp_priv = intel_output->dev_priv;
- DRM_ERROR("i2c_init %s\n", name);
+ DRM_DEBUG_KMS("i2c_init %s\n", name);
dp_priv->algo.running = false;
dp_priv->algo.address = 0;
dp_priv->algo.aux_ch = intel_dp_i2c_aux_ch;
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/i2c-algo-bit.h>
+#include "i915_drv.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
struct intel_crtc {
struct drm_crtc base;
- int pipe;
- int plane;
+ enum pipe pipe;
+ enum plane plane;
struct drm_gem_object *cursor_bo;
uint32_t cursor_addr;
u8 lut_r[256], lut_g[256], lut_b[256];
extern void intelfb_restore(void);
extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
+extern void intel_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno);
extern int intel_framebuffer_create(struct drm_device *dev,
struct drm_mode_fb_cmd *mode_cmd,
.fb_imageblit = cfb_imageblit,
.fb_pan_display = drm_fb_helper_pan_display,
.fb_blank = drm_fb_helper_blank,
+ .fb_setcmap = drm_fb_helper_setcmap,
};
static struct drm_fb_helper_funcs intel_fb_helper_funcs = {
.gamma_set = intel_crtc_fb_gamma_set,
+ .gamma_get = intel_crtc_fb_gamma_get,
};
static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
uint32_t fb_height, uint32_t surface_width,
uint32_t surface_height,
+ uint32_t surface_depth, uint32_t surface_bpp,
struct drm_framebuffer **fb_p)
{
struct fb_info *info;
struct device *device = &dev->pdev->dev;
int size, ret, mmio_bar = IS_I9XX(dev) ? 0 : 1;
+ /* we don't do packed 24bpp */
+ if (surface_bpp == 24)
+ surface_bpp = 32;
+
mode_cmd.width = surface_width;
mode_cmd.height = surface_height;
- mode_cmd.bpp = 32;
+ mode_cmd.bpp = surface_bpp;
mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 1) / 8), 64);
- mode_cmd.depth = 24;
+ mode_cmd.depth = surface_depth;
size = mode_cmd.pitch * mode_cmd.height;
size = ALIGN(size, PAGE_SIZE);
// memset(info->screen_base, 0, size);
- drm_fb_helper_fill_fix(info, fb->pitch);
+ drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
drm_fb_helper_fill_var(info, fb, fb_width, fb_height);
/* FIXME: we really shouldn't expose mmio space at all */
int ret;
DRM_DEBUG("\n");
- ret = drm_fb_helper_single_fb_probe(dev, intelfb_create);
+ ret = drm_fb_helper_single_fb_probe(dev, 32, intelfb_create);
return ret;
}
EXPORT_SYMBOL(intelfb_probe);
connector = &intel_output->base;
drm_connector_init(dev, connector, &intel_hdmi_connector_funcs,
- DRM_MODE_CONNECTOR_DVID);
+ DRM_MODE_CONNECTOR_HDMIA);
drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
intel_output->type = INTEL_OUTPUT_HDMI;
* Jesse Barnes <jesse.barnes@intel.com>
*/
+#include <acpi/button.h>
#include <linux/dmi.h>
#include <linux/i2c.h>
#include "drmP.h"
goto out;
}
+ /* full screen scale for now */
+ if (IS_IGDNG(dev))
+ goto out;
+
/* 965+ wants fuzzy fitting */
if (IS_I965G(dev))
pfit_control |= (intel_crtc->pipe << PFIT_PIPE_SHIFT) |
* to register description and PRM.
* Change the value here to see the borders for debugging
*/
- I915_WRITE(BCLRPAT_A, 0);
- I915_WRITE(BCLRPAT_B, 0);
+ if (!IS_IGDNG(dev)) {
+ I915_WRITE(BCLRPAT_A, 0);
+ I915_WRITE(BCLRPAT_B, 0);
+ }
switch (lvds_priv->fitting_mode) {
case DRM_MODE_SCALE_CENTER:
adjusted_mode->crtc_vblank_start + vsync_pos;
/* keep the vsync width constant */
adjusted_mode->crtc_vsync_end =
- adjusted_mode->crtc_vblank_start + vsync_width;
+ adjusted_mode->crtc_vsync_start + vsync_width;
border = 1;
break;
case DRM_MODE_SCALE_ASPECT:
out:
lvds_priv->pfit_control = pfit_control;
lvds_priv->pfit_pgm_ratios = pfit_pgm_ratios;
+ /*
+ * When there exists the border, it means that the LVDS_BORDR
+ * should be enabled.
+ */
+ if (border)
+ dev_priv->lvds_border_bits |= LVDS_BORDER_ENABLE;
+ else
+ dev_priv->lvds_border_bits &= ~(LVDS_BORDER_ENABLE);
/*
* XXX: It would be nice to support lower refresh rates on the
* panels to reduce power consumption, and perhaps match the
* settings.
*/
- /* No panel fitting yet, fixme */
if (IS_IGDNG(dev))
return;
I915_WRITE(PFIT_CONTROL, lvds_priv->pfit_control);
}
+/* Some lid devices report incorrect lid status, assume they're connected */
+static const struct dmi_system_id bad_lid_status[] = {
+ {
+ .ident = "Aspire One",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire one"),
+ },
+ },
+ { }
+};
+
/**
* Detect the LVDS connection.
*
- * This always returns CONNECTOR_STATUS_CONNECTED. This connector should only have
- * been set up if the LVDS was actually connected anyway.
+ * Since LVDS doesn't have hotlug, we use the lid as a proxy. Open means
+ * connected and closed means disconnected. We also send hotplug events as
+ * needed, using lid status notification from the input layer.
*/
static enum drm_connector_status intel_lvds_detect(struct drm_connector *connector)
{
- return connector_status_connected;
+ enum drm_connector_status status = connector_status_connected;
+
+ if (!acpi_lid_open() && !dmi_check_system(bad_lid_status))
+ status = connector_status_disconnected;
+
+ return status;
}
/**
return 0;
}
+/*
+ * Lid events. Note the use of 'modeset_on_lid':
+ * - we set it on lid close, and reset it on open
+ * - we use it as a "only once" bit (ie we ignore
+ * duplicate events where it was already properly
+ * set/reset)
+ * - the suspend/resume paths will also set it to
+ * zero, since they restore the mode ("lid open").
+ */
+static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
+ void *unused)
+{
+ struct drm_i915_private *dev_priv =
+ container_of(nb, struct drm_i915_private, lid_notifier);
+ struct drm_device *dev = dev_priv->dev;
+
+ if (!acpi_lid_open()) {
+ dev_priv->modeset_on_lid = 1;
+ return NOTIFY_OK;
+ }
+
+ if (!dev_priv->modeset_on_lid)
+ return NOTIFY_OK;
+
+ dev_priv->modeset_on_lid = 0;
+
+ mutex_lock(&dev->mode_config.mutex);
+ drm_helper_resume_force_mode(dev);
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return NOTIFY_OK;
+}
+
/**
* intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
*/
static void intel_lvds_destroy(struct drm_connector *connector)
{
+ struct drm_device *dev = connector->dev;
struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_i915_private *dev_priv = dev->dev_private;
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
+ if (dev_priv->lid_notifier.notifier_call)
+ acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
pwm |= PWM_PCH_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
}
+ dev_priv->lid_notifier.notifier_call = intel_lid_notify;
+ if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
+ DRM_DEBUG("lid notifier registration failed\n");
+ dev_priv->lid_notifier.notifier_call = NULL;
+ }
drm_sysfs_connector_add(connector);
return;
struct intel_sdvo_dtd save_input_dtd_1, save_input_dtd_2;
struct intel_sdvo_dtd save_output_dtd[16];
u32 save_SDVOX;
+ /* add the property for the SDVO-TV */
+ struct drm_property *left_property;
+ struct drm_property *right_property;
+ struct drm_property *top_property;
+ struct drm_property *bottom_property;
+ struct drm_property *hpos_property;
+ struct drm_property *vpos_property;
+
+ /* add the property for the SDVO-TV/LVDS */
+ struct drm_property *brightness_property;
+ struct drm_property *contrast_property;
+ struct drm_property *saturation_property;
+ struct drm_property *hue_property;
+
+ /* Add variable to record current setting for the above property */
+ u32 left_margin, right_margin, top_margin, bottom_margin;
+ /* this is to get the range of margin.*/
+ u32 max_hscan, max_vscan;
+ u32 max_hpos, cur_hpos;
+ u32 max_vpos, cur_vpos;
+ u32 cur_brightness, max_brightness;
+ u32 cur_contrast, max_contrast;
+ u32 cur_saturation, max_saturation;
+ u32 cur_hue, max_hue;
};
static bool
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT),
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT),
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS),
+ /* Add the op code for SDVO enhancements */
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_POSITION_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POSITION_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_POSITION_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_POSITION_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POSITION_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_POSITION_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V),
+ SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V),
/* HDMI op code */
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE),
SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE),
status = intel_sdvo_read_response(output, NULL, 0);
if (status != SDVO_CMD_STATUS_SUCCESS)
- DRM_DEBUG("%s: Failed to set TV format\n",
+ DRM_DEBUG_KMS("%s: Failed to set TV format\n",
SDVO_NAME(sdvo_priv));
}
return 1;
}
+static
+void intel_sdvo_destroy_enhance_property(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct drm_device *dev = connector->dev;
+
+ if (sdvo_priv->is_tv) {
+ if (sdvo_priv->left_property)
+ drm_property_destroy(dev, sdvo_priv->left_property);
+ if (sdvo_priv->right_property)
+ drm_property_destroy(dev, sdvo_priv->right_property);
+ if (sdvo_priv->top_property)
+ drm_property_destroy(dev, sdvo_priv->top_property);
+ if (sdvo_priv->bottom_property)
+ drm_property_destroy(dev, sdvo_priv->bottom_property);
+ if (sdvo_priv->hpos_property)
+ drm_property_destroy(dev, sdvo_priv->hpos_property);
+ if (sdvo_priv->vpos_property)
+ drm_property_destroy(dev, sdvo_priv->vpos_property);
+ }
+ if (sdvo_priv->is_tv) {
+ if (sdvo_priv->saturation_property)
+ drm_property_destroy(dev,
+ sdvo_priv->saturation_property);
+ if (sdvo_priv->contrast_property)
+ drm_property_destroy(dev,
+ sdvo_priv->contrast_property);
+ if (sdvo_priv->hue_property)
+ drm_property_destroy(dev, sdvo_priv->hue_property);
+ }
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
+ if (sdvo_priv->brightness_property)
+ drm_property_destroy(dev,
+ sdvo_priv->brightness_property);
+ }
+ return;
+}
+
static void intel_sdvo_destroy(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
drm_property_destroy(connector->dev,
sdvo_priv->tv_format_property);
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds)
+ intel_sdvo_destroy_enhance_property(connector);
+
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
struct drm_crtc *crtc = encoder->crtc;
int ret = 0;
bool changed = false;
+ uint8_t cmd, status;
+ uint16_t temp_value;
ret = drm_connector_property_set_value(connector, property, val);
if (ret < 0)
sdvo_priv->tv_format_name = sdvo_priv->tv_format_supported[val];
changed = true;
- } else {
- ret = -EINVAL;
- goto out;
}
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
+ cmd = 0;
+ temp_value = val;
+ if (sdvo_priv->left_property == property) {
+ drm_connector_property_set_value(connector,
+ sdvo_priv->right_property, val);
+ if (sdvo_priv->left_margin == temp_value)
+ goto out;
+
+ sdvo_priv->left_margin = temp_value;
+ sdvo_priv->right_margin = temp_value;
+ temp_value = sdvo_priv->max_hscan -
+ sdvo_priv->left_margin;
+ cmd = SDVO_CMD_SET_OVERSCAN_H;
+ } else if (sdvo_priv->right_property == property) {
+ drm_connector_property_set_value(connector,
+ sdvo_priv->left_property, val);
+ if (sdvo_priv->right_margin == temp_value)
+ goto out;
+
+ sdvo_priv->left_margin = temp_value;
+ sdvo_priv->right_margin = temp_value;
+ temp_value = sdvo_priv->max_hscan -
+ sdvo_priv->left_margin;
+ cmd = SDVO_CMD_SET_OVERSCAN_H;
+ } else if (sdvo_priv->top_property == property) {
+ drm_connector_property_set_value(connector,
+ sdvo_priv->bottom_property, val);
+ if (sdvo_priv->top_margin == temp_value)
+ goto out;
+
+ sdvo_priv->top_margin = temp_value;
+ sdvo_priv->bottom_margin = temp_value;
+ temp_value = sdvo_priv->max_vscan -
+ sdvo_priv->top_margin;
+ cmd = SDVO_CMD_SET_OVERSCAN_V;
+ } else if (sdvo_priv->bottom_property == property) {
+ drm_connector_property_set_value(connector,
+ sdvo_priv->top_property, val);
+ if (sdvo_priv->bottom_margin == temp_value)
+ goto out;
+ sdvo_priv->top_margin = temp_value;
+ sdvo_priv->bottom_margin = temp_value;
+ temp_value = sdvo_priv->max_vscan -
+ sdvo_priv->top_margin;
+ cmd = SDVO_CMD_SET_OVERSCAN_V;
+ } else if (sdvo_priv->hpos_property == property) {
+ if (sdvo_priv->cur_hpos == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_POSITION_H;
+ sdvo_priv->cur_hpos = temp_value;
+ } else if (sdvo_priv->vpos_property == property) {
+ if (sdvo_priv->cur_vpos == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_POSITION_V;
+ sdvo_priv->cur_vpos = temp_value;
+ } else if (sdvo_priv->saturation_property == property) {
+ if (sdvo_priv->cur_saturation == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_SATURATION;
+ sdvo_priv->cur_saturation = temp_value;
+ } else if (sdvo_priv->contrast_property == property) {
+ if (sdvo_priv->cur_contrast == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_CONTRAST;
+ sdvo_priv->cur_contrast = temp_value;
+ } else if (sdvo_priv->hue_property == property) {
+ if (sdvo_priv->cur_hue == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_HUE;
+ sdvo_priv->cur_hue = temp_value;
+ } else if (sdvo_priv->brightness_property == property) {
+ if (sdvo_priv->cur_brightness == temp_value)
+ goto out;
+
+ cmd = SDVO_CMD_SET_BRIGHTNESS;
+ sdvo_priv->cur_brightness = temp_value;
+ }
+ if (cmd) {
+ intel_sdvo_write_cmd(intel_output, cmd, &temp_value, 2);
+ status = intel_sdvo_read_response(intel_output,
+ NULL, 0);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO command \n");
+ return -EINVAL;
+ }
+ changed = true;
+ }
+ }
if (changed && crtc)
drm_crtc_helper_set_mode(crtc, &crtc->mode, crtc->x,
crtc->y, crtc->fb);
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
encoder->encoder_type = DRM_MODE_ENCODER_DAC;
connector->connector_type = DRM_MODE_CONNECTOR_VGA;
+ intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
+ (1 << INTEL_ANALOG_CLONE_BIT);
} else if (flags & SDVO_OUTPUT_LVDS0) {
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
}
+static void intel_sdvo_create_enhance_property(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct intel_sdvo_enhancements_reply sdvo_data;
+ struct drm_device *dev = connector->dev;
+ uint8_t status;
+ uint16_t response, data_value[2];
+
+ intel_sdvo_write_cmd(intel_output, SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS,
+ NULL, 0);
+ status = intel_sdvo_read_response(intel_output, &sdvo_data,
+ sizeof(sdvo_data));
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS(" incorrect response is returned\n");
+ return;
+ }
+ response = *((uint16_t *)&sdvo_data);
+ if (!response) {
+ DRM_DEBUG_KMS("No enhancement is supported\n");
+ return;
+ }
+ if (sdvo_priv->is_tv) {
+ /* when horizontal overscan is supported, Add the left/right
+ * property
+ */
+ if (sdvo_data.overscan_h) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_OVERSCAN_H, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO max "
+ "h_overscan\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_OVERSCAN_H, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO h_overscan\n");
+ return;
+ }
+ sdvo_priv->max_hscan = data_value[0];
+ sdvo_priv->left_margin = data_value[0] - response;
+ sdvo_priv->right_margin = sdvo_priv->left_margin;
+ sdvo_priv->left_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "left_margin", 2);
+ sdvo_priv->left_property->values[0] = 0;
+ sdvo_priv->left_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->left_property,
+ sdvo_priv->left_margin);
+ sdvo_priv->right_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "right_margin", 2);
+ sdvo_priv->right_property->values[0] = 0;
+ sdvo_priv->right_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->right_property,
+ sdvo_priv->right_margin);
+ DRM_DEBUG_KMS("h_overscan: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.overscan_v) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_OVERSCAN_V, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO max "
+ "v_overscan\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_OVERSCAN_V, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO v_overscan\n");
+ return;
+ }
+ sdvo_priv->max_vscan = data_value[0];
+ sdvo_priv->top_margin = data_value[0] - response;
+ sdvo_priv->bottom_margin = sdvo_priv->top_margin;
+ sdvo_priv->top_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "top_margin", 2);
+ sdvo_priv->top_property->values[0] = 0;
+ sdvo_priv->top_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->top_property,
+ sdvo_priv->top_margin);
+ sdvo_priv->bottom_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "bottom_margin", 2);
+ sdvo_priv->bottom_property->values[0] = 0;
+ sdvo_priv->bottom_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->bottom_property,
+ sdvo_priv->bottom_margin);
+ DRM_DEBUG_KMS("v_overscan: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.position_h) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_POSITION_H, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max h_pos\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_POSITION_H, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get h_postion\n");
+ return;
+ }
+ sdvo_priv->max_hpos = data_value[0];
+ sdvo_priv->cur_hpos = response;
+ sdvo_priv->hpos_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "hpos", 2);
+ sdvo_priv->hpos_property->values[0] = 0;
+ sdvo_priv->hpos_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->hpos_property,
+ sdvo_priv->cur_hpos);
+ DRM_DEBUG_KMS("h_position: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.position_v) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_POSITION_V, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max v_pos\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_POSITION_V, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get v_postion\n");
+ return;
+ }
+ sdvo_priv->max_vpos = data_value[0];
+ sdvo_priv->cur_vpos = response;
+ sdvo_priv->vpos_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "vpos", 2);
+ sdvo_priv->vpos_property->values[0] = 0;
+ sdvo_priv->vpos_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->vpos_property,
+ sdvo_priv->cur_vpos);
+ DRM_DEBUG_KMS("v_position: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ }
+ if (sdvo_priv->is_tv) {
+ if (sdvo_data.saturation) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_SATURATION, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max sat\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_SATURATION, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get sat\n");
+ return;
+ }
+ sdvo_priv->max_saturation = data_value[0];
+ sdvo_priv->cur_saturation = response;
+ sdvo_priv->saturation_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "saturation", 2);
+ sdvo_priv->saturation_property->values[0] = 0;
+ sdvo_priv->saturation_property->values[1] =
+ data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->saturation_property,
+ sdvo_priv->cur_saturation);
+ DRM_DEBUG_KMS("saturation: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.contrast) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_CONTRAST, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max contrast\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_CONTRAST, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get contrast\n");
+ return;
+ }
+ sdvo_priv->max_contrast = data_value[0];
+ sdvo_priv->cur_contrast = response;
+ sdvo_priv->contrast_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "contrast", 2);
+ sdvo_priv->contrast_property->values[0] = 0;
+ sdvo_priv->contrast_property->values[1] = data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->contrast_property,
+ sdvo_priv->cur_contrast);
+ DRM_DEBUG_KMS("contrast: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ if (sdvo_data.hue) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_HUE, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max hue\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_HUE, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get hue\n");
+ return;
+ }
+ sdvo_priv->max_hue = data_value[0];
+ sdvo_priv->cur_hue = response;
+ sdvo_priv->hue_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "hue", 2);
+ sdvo_priv->hue_property->values[0] = 0;
+ sdvo_priv->hue_property->values[1] =
+ data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->hue_property,
+ sdvo_priv->cur_hue);
+ DRM_DEBUG_KMS("hue: max %d, default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ }
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds) {
+ if (sdvo_data.brightness) {
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_MAX_BRIGHTNESS, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &data_value, 4);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO Max bright\n");
+ return;
+ }
+ intel_sdvo_write_cmd(intel_output,
+ SDVO_CMD_GET_BRIGHTNESS, NULL, 0);
+ status = intel_sdvo_read_response(intel_output,
+ &response, 2);
+ if (status != SDVO_CMD_STATUS_SUCCESS) {
+ DRM_DEBUG_KMS("Incorrect SDVO get brigh\n");
+ return;
+ }
+ sdvo_priv->max_brightness = data_value[0];
+ sdvo_priv->cur_brightness = response;
+ sdvo_priv->brightness_property =
+ drm_property_create(dev, DRM_MODE_PROP_RANGE,
+ "brightness", 2);
+ sdvo_priv->brightness_property->values[0] = 0;
+ sdvo_priv->brightness_property->values[1] =
+ data_value[0];
+ drm_connector_attach_property(connector,
+ sdvo_priv->brightness_property,
+ sdvo_priv->cur_brightness);
+ DRM_DEBUG_KMS("brightness: max %d, "
+ "default %d, current %d\n",
+ data_value[0], data_value[1], response);
+ }
+ }
+ return;
+}
+
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
struct drm_connector *connector;
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
if (sdvo_priv->is_tv)
intel_sdvo_tv_create_property(connector);
+
+ if (sdvo_priv->is_tv || sdvo_priv->is_lvds)
+ intel_sdvo_create_enhance_property(connector);
+
drm_sysfs_connector_add(connector);
intel_sdvo_select_ddc_bus(sdvo_priv);
const struct tv_mode *tv_mode = intel_tv_mode_find(intel_output);
/* Ensure TV refresh is close to desired refresh */
- if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode)) < 10)
+ if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode) * 1000)
+ < 1000)
return MODE_OK;
return MODE_CLOCK_RANGE;
}
--- /dev/null
+mkregtable
+*_reg_safe.h
+
.mode_set_base = atombios_crtc_set_base,
.prepare = atombios_crtc_prepare,
.commit = atombios_crtc_commit,
+ .load_lut = radeon_crtc_load_lut,
};
void radeon_atombios_init_crtc(struct drm_device *dev,
#define VGA_RENDER_CONTROL 0x0300
#define VGA_VSTATUS_CNTL_MASK 0x00030000
-/* AVIVO disable VGA rendering */
-static inline void radeon_avivo_vga_render_disable(struct radeon_device *rdev)
-{
- u32 vga_render;
- vga_render = RREG32(VGA_RENDER_CONTROL);
- vga_render &= ~VGA_VSTATUS_CNTL_MASK;
- WREG32(VGA_RENDER_CONTROL, vga_render);
-}
-
#endif
#include "radeon_reg.h"
#include "radeon.h"
#include "r100d.h"
+#include "rs100d.h"
+#include "rv200d.h"
+#include "rv250d.h"
#include <linux/firmware.h>
#include <linux/platform_device.h>
/* This files gather functions specifics to:
* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
- *
- * Some of these functions might be used by newer ASICs.
*/
-int r200_init(struct radeon_device *rdev);
-void r100_hdp_reset(struct radeon_device *rdev);
-void r100_gpu_init(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r100_mc_wait_for_idle(struct radeon_device *rdev);
-void r100_gpu_wait_for_vsync(struct radeon_device *rdev);
-void r100_gpu_wait_for_vsync2(struct radeon_device *rdev);
-int r100_debugfs_mc_info_init(struct radeon_device *rdev);
-
/*
* PCI GART
radeon_gart_fini(rdev);
}
-
-/*
- * MC
- */
-void r100_mc_disable_clients(struct radeon_device *rdev)
-{
- uint32_t ov0_scale_cntl, crtc_ext_cntl, crtc_gen_cntl, crtc2_gen_cntl;
-
- /* FIXME: is this function correct for rs100,rs200,rs300 ? */
- if (r100_gui_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait GUI idle while "
- "programming pipes. Bad things might happen.\n");
- }
-
- /* stop display and memory access */
- ov0_scale_cntl = RREG32(RADEON_OV0_SCALE_CNTL);
- WREG32(RADEON_OV0_SCALE_CNTL, ov0_scale_cntl & ~RADEON_SCALER_ENABLE);
- crtc_ext_cntl = RREG32(RADEON_CRTC_EXT_CNTL);
- WREG32(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl | RADEON_CRTC_DISPLAY_DIS);
- crtc_gen_cntl = RREG32(RADEON_CRTC_GEN_CNTL);
-
- r100_gpu_wait_for_vsync(rdev);
-
- WREG32(RADEON_CRTC_GEN_CNTL,
- (crtc_gen_cntl & ~(RADEON_CRTC_CUR_EN | RADEON_CRTC_ICON_EN)) |
- RADEON_CRTC_DISP_REQ_EN_B | RADEON_CRTC_EXT_DISP_EN);
-
- if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
- crtc2_gen_cntl = RREG32(RADEON_CRTC2_GEN_CNTL);
-
- r100_gpu_wait_for_vsync2(rdev);
- WREG32(RADEON_CRTC2_GEN_CNTL,
- (crtc2_gen_cntl &
- ~(RADEON_CRTC2_CUR_EN | RADEON_CRTC2_ICON_EN)) |
- RADEON_CRTC2_DISP_REQ_EN_B);
- }
-
- udelay(500);
-}
-
-void r100_mc_setup(struct radeon_device *rdev)
-{
- uint32_t tmp;
- int r;
-
- r = r100_debugfs_mc_info_init(rdev);
- if (r) {
- DRM_ERROR("Failed to register debugfs file for R100 MC !\n");
- }
- /* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
- /* Novell bug 204882 for RN50/M6/M7 with 8/16/32MB VRAM,
- * if the aperture is 64MB but we have 32MB VRAM
- * we report only 32MB VRAM but we have to set MC_FB_LOCATION
- * to 64MB, otherwise the gpu accidentially dies */
- tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
- tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
- tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32(RADEON_MC_FB_LOCATION, tmp);
-
- /* Enable bus mastering */
- tmp = RREG32(RADEON_BUS_CNTL) & ~RADEON_BUS_MASTER_DIS;
- WREG32(RADEON_BUS_CNTL, tmp);
-
- if (rdev->flags & RADEON_IS_AGP) {
- tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
- tmp = REG_SET(RADEON_MC_AGP_TOP, tmp >> 16);
- tmp |= REG_SET(RADEON_MC_AGP_START, rdev->mc.gtt_location >> 16);
- WREG32(RADEON_MC_AGP_LOCATION, tmp);
- WREG32(RADEON_AGP_BASE, rdev->mc.agp_base);
- } else {
- WREG32(RADEON_MC_AGP_LOCATION, 0x0FFFFFFF);
- WREG32(RADEON_AGP_BASE, 0);
- }
-
- tmp = RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL;
- tmp |= (7 << 28);
- WREG32(RADEON_HOST_PATH_CNTL, tmp | RADEON_HDP_SOFT_RESET | RADEON_HDP_READ_BUFFER_INVALIDATE);
- (void)RREG32(RADEON_HOST_PATH_CNTL);
- WREG32(RADEON_HOST_PATH_CNTL, tmp);
- (void)RREG32(RADEON_HOST_PATH_CNTL);
-}
-
-int r100_mc_init(struct radeon_device *rdev)
-{
- int r;
-
- if (r100_debugfs_rbbm_init(rdev)) {
- DRM_ERROR("Failed to register debugfs file for RBBM !\n");
- }
-
- r100_gpu_init(rdev);
- /* Disable gart which also disable out of gart access */
- r100_pci_gart_disable(rdev);
-
- /* Setup GPU memory space */
- rdev->mc.gtt_location = 0xFFFFFFFFUL;
- if (rdev->flags & RADEON_IS_AGP) {
- r = radeon_agp_init(rdev);
- if (r) {
- printk(KERN_WARNING "[drm] Disabling AGP\n");
- rdev->flags &= ~RADEON_IS_AGP;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
- } else {
- rdev->mc.gtt_location = rdev->mc.agp_base;
- }
- }
- r = radeon_mc_setup(rdev);
- if (r) {
- return r;
- }
-
- r100_mc_disable_clients(rdev);
- if (r100_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
- }
-
- r100_mc_setup(rdev);
- return 0;
-}
-
-void r100_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Interrupts
- */
int r100_irq_set(struct radeon_device *rdev)
{
uint32_t tmp = 0;
return RREG32(RADEON_CRTC2_CRNT_FRAME);
}
-
-/*
- * Fence emission
- */
void r100_fence_ring_emit(struct radeon_device *rdev,
struct radeon_fence *fence)
{
radeon_ring_write(rdev, RADEON_SW_INT_FIRE);
}
-
-/*
- * Writeback
- */
int r100_wb_init(struct radeon_device *rdev)
{
int r;
return r;
}
-
-/*
- * CP
- */
static int r100_cp_wait_for_idle(struct radeon_device *rdev)
{
unsigned i;
}
return err;
}
+
static void r100_cp_load_microcode(struct radeon_device *rdev)
{
const __be32 *fw_data;
void r100_cs_dump_packet(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt)
{
- struct radeon_cs_chunk *ib_chunk;
volatile uint32_t *ib;
unsigned i;
unsigned idx;
ib = p->ib->ptr;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
idx = pkt->idx;
for (i = 0; i <= (pkt->count + 1); i++, idx++) {
DRM_INFO("ib[%d]=0x%08X\n", idx, ib[idx]);
idx, ib_chunk->length_dw);
return -EINVAL;
}
- header = ib_chunk->kdata[idx];
+ header = radeon_get_ib_value(p, idx);
pkt->idx = idx;
pkt->type = CP_PACKET_GET_TYPE(header);
pkt->count = CP_PACKET_GET_COUNT(header);
*/
int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
{
- struct radeon_cs_chunk *ib_chunk;
struct drm_mode_object *obj;
struct drm_crtc *crtc;
struct radeon_crtc *radeon_crtc;
int crtc_id;
int r;
uint32_t header, h_idx, reg;
+ volatile uint32_t *ib;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
+ ib = p->ib->ptr;
/* parse the wait until */
r = r100_cs_packet_parse(p, &waitreloc, p->idx);
return r;
}
- if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+ if (radeon_get_ib_value(p, waitreloc.idx + 1) != RADEON_WAIT_CRTC_VLINE) {
DRM_ERROR("vline wait had illegal wait until\n");
r = -EINVAL;
return r;
}
/* jump over the NOP */
- r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+ r = r100_cs_packet_parse(p, &p3reloc, p->idx + waitreloc.count + 2);
if (r)
return r;
h_idx = p->idx - 2;
- p->idx += waitreloc.count;
- p->idx += p3reloc.count;
+ p->idx += waitreloc.count + 2;
+ p->idx += p3reloc.count + 2;
- header = ib_chunk->kdata[h_idx];
- crtc_id = ib_chunk->kdata[h_idx + 5];
- reg = ib_chunk->kdata[h_idx] >> 2;
+ header = radeon_get_ib_value(p, h_idx);
+ crtc_id = radeon_get_ib_value(p, h_idx + 5);
+ reg = CP_PACKET0_GET_REG(header);
mutex_lock(&p->rdev->ddev->mode_config.mutex);
obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
if (!obj) {
if (!crtc->enabled) {
/* if the CRTC isn't enabled - we need to nop out the wait until */
- ib_chunk->kdata[h_idx + 2] = PACKET2(0);
- ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+ ib[h_idx + 2] = PACKET2(0);
+ ib[h_idx + 3] = PACKET2(0);
} else if (crtc_id == 1) {
switch (reg) {
case AVIVO_D1MODE_VLINE_START_END:
- header &= R300_CP_PACKET0_REG_MASK;
+ header &= ~R300_CP_PACKET0_REG_MASK;
header |= AVIVO_D2MODE_VLINE_START_END >> 2;
break;
case RADEON_CRTC_GUI_TRIG_VLINE:
- header &= R300_CP_PACKET0_REG_MASK;
+ header &= ~R300_CP_PACKET0_REG_MASK;
header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
break;
default:
r = -EINVAL;
goto out;
}
- ib_chunk->kdata[h_idx] = header;
- ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+ ib[h_idx] = header;
+ ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
}
out:
mutex_unlock(&p->rdev->ddev->mode_config.mutex);
int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
struct radeon_cs_reloc **cs_reloc)
{
- struct radeon_cs_chunk *ib_chunk;
struct radeon_cs_chunk *relocs_chunk;
struct radeon_cs_packet p3reloc;
unsigned idx;
return -EINVAL;
}
*cs_reloc = NULL;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
relocs_chunk = &p->chunks[p->chunk_relocs_idx];
r = r100_cs_packet_parse(p, &p3reloc, p->idx);
if (r) {
r100_cs_dump_packet(p, &p3reloc);
return -EINVAL;
}
- idx = ib_chunk->kdata[p3reloc.idx + 1];
+ idx = radeon_get_ib_value(p, p3reloc.idx + 1);
if (idx >= relocs_chunk->length_dw) {
DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
idx, relocs_chunk->length_dw);
struct radeon_cs_packet *pkt,
unsigned idx, unsigned reg)
{
- struct radeon_cs_chunk *ib_chunk;
struct radeon_cs_reloc *reloc;
struct r100_cs_track *track;
volatile uint32_t *ib;
int r;
int i, face;
u32 tile_flags = 0;
+ u32 idx_value;
ib = p->ib->ptr;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
track = (struct r100_cs_track *)p->track;
+ idx_value = radeon_get_ib_value(p, idx);
+
switch (reg) {
case RADEON_CRTC_GUI_TRIG_VLINE:
r = r100_cs_packet_parse_vline(p);
return r;
}
track->zb.robj = reloc->robj;
- track->zb.offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->zb.offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case RADEON_RB3D_COLOROFFSET:
r = r100_cs_packet_next_reloc(p, &reloc);
return r;
}
track->cb[0].robj = reloc->robj;
- track->cb[0].offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->cb[0].offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case RADEON_PP_TXOFFSET_0:
case RADEON_PP_TXOFFSET_1:
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
track->textures[i].robj = reloc->robj;
break;
case RADEON_PP_CUBIC_OFFSET_T0_0:
r100_cs_dump_packet(p, pkt);
return r;
}
- track->textures[0].cube_info[i].offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->textures[0].cube_info[i].offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
track->textures[0].cube_info[i].robj = reloc->robj;
break;
case RADEON_PP_CUBIC_OFFSET_T1_0:
r100_cs_dump_packet(p, pkt);
return r;
}
- track->textures[1].cube_info[i].offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->textures[1].cube_info[i].offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
track->textures[1].cube_info[i].robj = reloc->robj;
break;
case RADEON_PP_CUBIC_OFFSET_T2_0:
r100_cs_dump_packet(p, pkt);
return r;
}
- track->textures[2].cube_info[i].offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->textures[2].cube_info[i].offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
track->textures[2].cube_info[i].robj = reloc->robj;
break;
case RADEON_RE_WIDTH_HEIGHT:
- track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF);
+ track->maxy = ((idx_value >> 16) & 0x7FF);
break;
case RADEON_RB3D_COLORPITCH:
r = r100_cs_packet_next_reloc(p, &reloc);
if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
- tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp = idx_value & ~(0x7 << 16);
tmp |= tile_flags;
ib[idx] = tmp;
- track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK;
+ track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK;
break;
case RADEON_RB3D_DEPTHPITCH:
- track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK;
+ track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK;
break;
case RADEON_RB3D_CNTL:
- switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
+ switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
case 7:
case 8:
case 9:
break;
default:
DRM_ERROR("Invalid color buffer format (%d) !\n",
- ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
+ ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
return -EINVAL;
}
- track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE);
+ track->z_enabled = !!(idx_value & RADEON_Z_ENABLE);
break;
case RADEON_RB3D_ZSTENCILCNTL:
- switch (ib_chunk->kdata[idx] & 0xf) {
+ switch (idx_value & 0xf) {
case 0:
track->zb.cpp = 2;
break;
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case RADEON_PP_CNTL:
{
- uint32_t temp = ib_chunk->kdata[idx] >> 4;
+ uint32_t temp = idx_value >> 4;
for (i = 0; i < track->num_texture; i++)
track->textures[i].enabled = !!(temp & (1 << i));
}
break;
case RADEON_SE_VF_CNTL:
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = idx_value;
break;
case RADEON_SE_VTX_FMT:
- track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx]);
+ track->vtx_size = r100_get_vtx_size(idx_value);
break;
case RADEON_PP_TEX_SIZE_0:
case RADEON_PP_TEX_SIZE_1:
case RADEON_PP_TEX_SIZE_2:
i = (reg - RADEON_PP_TEX_SIZE_0) / 8;
- track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1;
- track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
+ track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1;
+ track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
break;
case RADEON_PP_TEX_PITCH_0:
case RADEON_PP_TEX_PITCH_1:
case RADEON_PP_TEX_PITCH_2:
i = (reg - RADEON_PP_TEX_PITCH_0) / 8;
- track->textures[i].pitch = ib_chunk->kdata[idx] + 32;
+ track->textures[i].pitch = idx_value + 32;
break;
case RADEON_PP_TXFILTER_0:
case RADEON_PP_TXFILTER_1:
case RADEON_PP_TXFILTER_2:
i = (reg - RADEON_PP_TXFILTER_0) / 24;
- track->textures[i].num_levels = ((ib_chunk->kdata[idx] & RADEON_MAX_MIP_LEVEL_MASK)
+ track->textures[i].num_levels = ((idx_value & RADEON_MAX_MIP_LEVEL_MASK)
>> RADEON_MAX_MIP_LEVEL_SHIFT);
- tmp = (ib_chunk->kdata[idx] >> 23) & 0x7;
+ tmp = (idx_value >> 23) & 0x7;
if (tmp == 2 || tmp == 6)
track->textures[i].roundup_w = false;
- tmp = (ib_chunk->kdata[idx] >> 27) & 0x7;
+ tmp = (idx_value >> 27) & 0x7;
if (tmp == 2 || tmp == 6)
track->textures[i].roundup_h = false;
break;
case RADEON_PP_TXFORMAT_1:
case RADEON_PP_TXFORMAT_2:
i = (reg - RADEON_PP_TXFORMAT_0) / 24;
- if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_NON_POWER2) {
+ if (idx_value & RADEON_TXFORMAT_NON_POWER2) {
track->textures[i].use_pitch = 1;
} else {
track->textures[i].use_pitch = 0;
- track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
- track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
+ track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
+ track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
}
- if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_CUBIC_MAP_ENABLE)
+ if (idx_value & RADEON_TXFORMAT_CUBIC_MAP_ENABLE)
track->textures[i].tex_coord_type = 2;
- switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) {
+ switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) {
case RADEON_TXFORMAT_I8:
case RADEON_TXFORMAT_RGB332:
case RADEON_TXFORMAT_Y8:
track->textures[i].cpp = 4;
break;
}
- track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf);
- track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf);
+ track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf);
+ track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf);
break;
case RADEON_PP_CUBIC_FACES_0:
case RADEON_PP_CUBIC_FACES_1:
case RADEON_PP_CUBIC_FACES_2:
- tmp = ib_chunk->kdata[idx];
+ tmp = idx_value;
i = (reg - RADEON_PP_CUBIC_FACES_0) / 4;
for (face = 0; face < 4; face++) {
track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf);
struct radeon_cs_packet *pkt,
struct radeon_object *robj)
{
- struct radeon_cs_chunk *ib_chunk;
unsigned idx;
-
- ib_chunk = &p->chunks[p->chunk_ib_idx];
+ u32 value;
idx = pkt->idx + 1;
- if ((ib_chunk->kdata[idx+2] + 1) > radeon_object_size(robj)) {
+ value = radeon_get_ib_value(p, idx + 2);
+ if ((value + 1) > radeon_object_size(robj)) {
DRM_ERROR("[drm] Buffer too small for PACKET3 INDX_BUFFER "
"(need %u have %lu) !\n",
- ib_chunk->kdata[idx+2] + 1,
+ value + 1,
radeon_object_size(robj));
return -EINVAL;
}
static int r100_packet3_check(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt)
{
- struct radeon_cs_chunk *ib_chunk;
struct radeon_cs_reloc *reloc;
struct r100_cs_track *track;
unsigned idx;
- unsigned i, c;
volatile uint32_t *ib;
int r;
ib = p->ib->ptr;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
idx = pkt->idx + 1;
track = (struct r100_cs_track *)p->track;
switch (pkt->opcode) {
case PACKET3_3D_LOAD_VBPNTR:
- c = ib_chunk->kdata[idx++];
- track->num_arrays = c;
- for (i = 0; i < (c - 1); i += 2, idx += 3) {
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
- track->arrays[i + 0].robj = reloc->robj;
- track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
- track->arrays[i + 0].esize &= 0x7F;
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
- track->arrays[i + 1].robj = reloc->robj;
- track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
- track->arrays[i + 1].esize &= 0x7F;
- }
- if (c & 1) {
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
- track->arrays[i + 0].robj = reloc->robj;
- track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
- track->arrays[i + 0].esize &= 0x7F;
- }
+ r = r100_packet3_load_vbpntr(p, pkt, idx);
+ if (r)
+ return r;
break;
case PACKET3_INDX_BUFFER:
r = r100_cs_packet_next_reloc(p, &reloc);
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx+1] = radeon_get_ib_value(p, idx+1) + ((u32)reloc->lobj.gpu_offset);
r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
if (r) {
return r;
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx] = radeon_get_ib_value(p, idx) + ((u32)reloc->lobj.gpu_offset);
track->num_arrays = 1;
- track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx+2]);
+ track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 2));
track->arrays[0].robj = reloc->robj;
track->arrays[0].esize = track->vtx_size;
- track->max_indx = ib_chunk->kdata[idx+1];
+ track->max_indx = radeon_get_ib_value(p, idx+1);
- track->vap_vf_cntl = ib_chunk->kdata[idx+3];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx+3);
track->immd_dwords = pkt->count - 1;
r = r100_cs_track_check(p->rdev, track);
if (r)
return r;
break;
case PACKET3_3D_DRAW_IMMD:
- if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+ if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) {
DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
return -EINVAL;
}
- track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
track->immd_dwords = pkt->count - 1;
r = r100_cs_track_check(p->rdev, track);
if (r)
break;
/* triggers drawing using in-packet vertex data */
case PACKET3_3D_DRAW_IMMD_2:
- if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+ if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) {
DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
return -EINVAL;
}
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx);
track->immd_dwords = pkt->count;
r = r100_cs_track_check(p->rdev, track);
if (r)
break;
/* triggers drawing using in-packet vertex data */
case PACKET3_3D_DRAW_VBUF_2:
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx);
r = r100_cs_track_check(p->rdev, track);
if (r)
return r;
break;
/* triggers drawing of vertex buffers setup elsewhere */
case PACKET3_3D_DRAW_INDX_2:
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx);
r = r100_cs_track_check(p->rdev, track);
if (r)
return r;
break;
/* triggers drawing using indices to vertex buffer */
case PACKET3_3D_DRAW_VBUF:
- track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
r = r100_cs_track_check(p->rdev, track);
if (r)
return r;
break;
/* triggers drawing of vertex buffers setup elsewhere */
case PACKET3_3D_DRAW_INDX:
- track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
r = r100_cs_track_check(p->rdev, track);
if (r)
return r;
r100_pll_errata_after_data(rdev);
}
-int r100_init(struct radeon_device *rdev)
+void r100_set_safe_registers(struct radeon_device *rdev)
{
if (ASIC_IS_RN50(rdev)) {
rdev->config.r100.reg_safe_bm = rn50_reg_safe_bm;
rdev->config.r100.reg_safe_bm = r100_reg_safe_bm;
rdev->config.r100.reg_safe_bm_size = ARRAY_SIZE(r100_reg_safe_bm);
} else {
- return r200_init(rdev);
+ r200_set_safe_registers(rdev);
}
- return 0;
}
/*
mode1 = &rdev->mode_info.crtcs[0]->base.mode;
pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
}
- if (rdev->mode_info.crtcs[1]->base.enabled) {
- mode2 = &rdev->mode_info.crtcs[1]->base.mode;
- pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+ if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
+ if (rdev->mode_info.crtcs[1]->base.enabled) {
+ mode2 = &rdev->mode_info.crtcs[1]->base.mode;
+ pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+ }
}
min_mem_eff.full = rfixed_const_8(0);
WREG32(R_000740_CP_CSQ_CNTL, 0);
/* Save few CRTC registers */
- save->GENMO_WT = RREG32(R_0003C0_GENMO_WT);
+ save->GENMO_WT = RREG8(R_0003C2_GENMO_WT);
save->CRTC_EXT_CNTL = RREG32(R_000054_CRTC_EXT_CNTL);
save->CRTC_GEN_CNTL = RREG32(R_000050_CRTC_GEN_CNTL);
save->CUR_OFFSET = RREG32(R_000260_CUR_OFFSET);
}
/* Disable VGA aperture access */
- WREG32(R_0003C0_GENMO_WT, C_0003C0_VGA_RAM_EN & save->GENMO_WT);
+ WREG8(R_0003C2_GENMO_WT, C_0003C2_VGA_RAM_EN & save->GENMO_WT);
/* Disable cursor, overlay, crtc */
WREG32(R_000260_CUR_OFFSET, save->CUR_OFFSET | S_000260_CUR_LOCK(1));
WREG32(R_000054_CRTC_EXT_CNTL, save->CRTC_EXT_CNTL |
rdev->mc.vram_location);
}
/* Restore CRTC registers */
- WREG32(R_0003C0_GENMO_WT, save->GENMO_WT);
+ WREG8(R_0003C2_GENMO_WT, save->GENMO_WT);
WREG32(R_000054_CRTC_EXT_CNTL, save->CRTC_EXT_CNTL);
WREG32(R_000050_CRTC_GEN_CNTL, save->CRTC_GEN_CNTL);
if (!(rdev->flags & RADEON_SINGLE_CRTC)) {
WREG32(R_0003F8_CRTC2_GEN_CNTL, save->CRTC2_GEN_CNTL);
}
}
+
+void r100_vga_render_disable(struct radeon_device *rdev)
+{
+ u32 tmp;
+
+ tmp = RREG8(R_0003C2_GENMO_WT);
+ WREG8(R_0003C2_GENMO_WT, C_0003C2_VGA_RAM_EN & tmp);
+}
+
+static void r100_debugfs(struct radeon_device *rdev)
+{
+ int r;
+
+ r = r100_debugfs_mc_info_init(rdev);
+ if (r)
+ dev_warn(rdev->dev, "Failed to create r100_mc debugfs file.\n");
+}
+
+static void r100_mc_program(struct radeon_device *rdev)
+{
+ struct r100_mc_save save;
+
+ /* Stops all mc clients */
+ r100_mc_stop(rdev, &save);
+ if (rdev->flags & RADEON_IS_AGP) {
+ WREG32(R_00014C_MC_AGP_LOCATION,
+ S_00014C_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+ S_00014C_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+ WREG32(R_000170_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+ if (rdev->family > CHIP_RV200)
+ WREG32(R_00015C_AGP_BASE_2,
+ upper_32_bits(rdev->mc.agp_base) & 0xff);
+ } else {
+ WREG32(R_00014C_MC_AGP_LOCATION, 0x0FFFFFFF);
+ WREG32(R_000170_AGP_BASE, 0);
+ if (rdev->family > CHIP_RV200)
+ WREG32(R_00015C_AGP_BASE_2, 0);
+ }
+ /* Wait for mc idle */
+ if (r100_mc_wait_for_idle(rdev))
+ dev_warn(rdev->dev, "Wait for MC idle timeout.\n");
+ /* Program MC, should be a 32bits limited address space */
+ WREG32(R_000148_MC_FB_LOCATION,
+ S_000148_MC_FB_START(rdev->mc.vram_start >> 16) |
+ S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16));
+ r100_mc_resume(rdev, &save);
+}
+
+void r100_clock_startup(struct radeon_device *rdev)
+{
+ u32 tmp;
+
+ if (radeon_dynclks != -1 && radeon_dynclks)
+ radeon_legacy_set_clock_gating(rdev, 1);
+ /* We need to force on some of the block */
+ tmp = RREG32_PLL(R_00000D_SCLK_CNTL);
+ tmp |= S_00000D_FORCE_CP(1) | S_00000D_FORCE_VIP(1);
+ if ((rdev->family == CHIP_RV250) || (rdev->family == CHIP_RV280))
+ tmp |= S_00000D_FORCE_DISP1(1) | S_00000D_FORCE_DISP2(1);
+ WREG32_PLL(R_00000D_SCLK_CNTL, tmp);
+}
+
+static int r100_startup(struct radeon_device *rdev)
+{
+ int r;
+
+ r100_mc_program(rdev);
+ /* Resume clock */
+ r100_clock_startup(rdev);
+ /* Initialize GPU configuration (# pipes, ...) */
+ r100_gpu_init(rdev);
+ /* Initialize GART (initialize after TTM so we can allocate
+ * memory through TTM but finalize after TTM) */
+ if (rdev->flags & RADEON_IS_PCI) {
+ r = r100_pci_gart_enable(rdev);
+ if (r)
+ return r;
+ }
+ /* Enable IRQ */
+ rdev->irq.sw_int = true;
+ r100_irq_set(rdev);
+ /* 1M ring buffer */
+ r = r100_cp_init(rdev, 1024 * 1024);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+ return r;
+ }
+ r = r100_wb_init(rdev);
+ if (r)
+ dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+ r = r100_ib_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+ return r;
+ }
+ return 0;
+}
+
+int r100_resume(struct radeon_device *rdev)
+{
+ /* Make sur GART are not working */
+ if (rdev->flags & RADEON_IS_PCI)
+ r100_pci_gart_disable(rdev);
+ /* Resume clock before doing reset */
+ r100_clock_startup(rdev);
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* post */
+ radeon_combios_asic_init(rdev->ddev);
+ /* Resume clock after posting */
+ r100_clock_startup(rdev);
+ return r100_startup(rdev);
+}
+
+int r100_suspend(struct radeon_device *rdev)
+{
+ r100_cp_disable(rdev);
+ r100_wb_disable(rdev);
+ r100_irq_disable(rdev);
+ if (rdev->flags & RADEON_IS_PCI)
+ r100_pci_gart_disable(rdev);
+ return 0;
+}
+
+void r100_fini(struct radeon_device *rdev)
+{
+ r100_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ radeon_gem_fini(rdev);
+ if (rdev->flags & RADEON_IS_PCI)
+ r100_pci_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ radeon_fence_driver_fini(rdev);
+ radeon_object_fini(rdev);
+ radeon_atombios_fini(rdev);
+ kfree(rdev->bios);
+ rdev->bios = NULL;
+}
+
+int r100_mc_init(struct radeon_device *rdev)
+{
+ int r;
+ u32 tmp;
+
+ /* Setup GPU memory space */
+ rdev->mc.vram_location = 0xFFFFFFFFUL;
+ rdev->mc.gtt_location = 0xFFFFFFFFUL;
+ if (rdev->flags & RADEON_IS_IGP) {
+ tmp = G_00015C_MC_FB_START(RREG32(R_00015C_NB_TOM));
+ rdev->mc.vram_location = tmp << 16;
+ }
+ if (rdev->flags & RADEON_IS_AGP) {
+ r = radeon_agp_init(rdev);
+ if (r) {
+ printk(KERN_WARNING "[drm] Disabling AGP\n");
+ rdev->flags &= ~RADEON_IS_AGP;
+ rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
+ } else {
+ rdev->mc.gtt_location = rdev->mc.agp_base;
+ }
+ }
+ r = radeon_mc_setup(rdev);
+ if (r)
+ return r;
+ return 0;
+}
+
+int r100_init(struct radeon_device *rdev)
+{
+ int r;
+
+ /* Register debugfs file specific to this group of asics */
+ r100_debugfs(rdev);
+ /* Disable VGA */
+ r100_vga_render_disable(rdev);
+ /* Initialize scratch registers */
+ radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
+ /* TODO: disable VGA need to use VGA request */
+ /* BIOS*/
+ if (!radeon_get_bios(rdev)) {
+ if (ASIC_IS_AVIVO(rdev))
+ return -EINVAL;
+ }
+ if (rdev->is_atom_bios) {
+ dev_err(rdev->dev, "Expecting combios for RS400/RS480 GPU\n");
+ return -EINVAL;
+ } else {
+ r = radeon_combios_init(rdev);
+ if (r)
+ return r;
+ }
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev,
+ "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* check if cards are posted or not */
+ if (!radeon_card_posted(rdev) && rdev->bios) {
+ DRM_INFO("GPU not posted. posting now...\n");
+ radeon_combios_asic_init(rdev->ddev);
+ }
+ /* Set asic errata */
+ r100_errata(rdev);
+ /* Initialize clocks */
+ radeon_get_clock_info(rdev->ddev);
+ /* Get vram informations */
+ r100_vram_info(rdev);
+ /* Initialize memory controller (also test AGP) */
+ r = r100_mc_init(rdev);
+ if (r)
+ return r;
+ /* Fence driver */
+ r = radeon_fence_driver_init(rdev);
+ if (r)
+ return r;
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ /* Memory manager */
+ r = radeon_object_init(rdev);
+ if (r)
+ return r;
+ if (rdev->flags & RADEON_IS_PCI) {
+ r = r100_pci_gart_init(rdev);
+ if (r)
+ return r;
+ }
+ r100_set_safe_registers(rdev);
+ rdev->accel_working = true;
+ r = r100_startup(rdev);
+ if (r) {
+ /* Somethings want wront with the accel init stop accel */
+ dev_err(rdev->dev, "Disabling GPU acceleration\n");
+ r100_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ if (rdev->flags & RADEON_IS_PCI)
+ r100_pci_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ rdev->accel_working = false;
+ }
+ return 0;
+}
struct radeon_cs_packet *pkt,
unsigned idx, unsigned reg);
+
+
static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt,
unsigned idx,
u32 tile_flags = 0;
u32 tmp;
struct radeon_cs_reloc *reloc;
- struct radeon_cs_chunk *ib_chunk;
-
- ib_chunk = &p->chunks[p->chunk_ib_idx];
+ u32 value;
r = r100_cs_packet_next_reloc(p, &reloc);
if (r) {
r100_cs_dump_packet(p, pkt);
return r;
}
- tmp = ib_chunk->kdata[idx] & 0x003fffff;
+ value = radeon_get_ib_value(p, idx);
+ tmp = value & 0x003fffff;
tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
}
tmp |= tile_flags;
- p->ib->ptr[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
+ p->ib->ptr[idx] = (value & 0x3fc00000) | tmp;
return 0;
}
+
+static inline int r100_packet3_load_vbpntr(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ int idx)
+{
+ unsigned c, i;
+ struct radeon_cs_reloc *reloc;
+ struct r100_cs_track *track;
+ int r = 0;
+ volatile uint32_t *ib;
+ u32 idx_value;
+
+ ib = p->ib->ptr;
+ track = (struct r100_cs_track *)p->track;
+ c = radeon_get_ib_value(p, idx++) & 0x1F;
+ track->num_arrays = c;
+ for (i = 0; i < (c - 1); i+=2, idx+=3) {
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for packet3 %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ idx_value = radeon_get_ib_value(p, idx);
+ ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+
+ track->arrays[i + 0].esize = idx_value >> 8;
+ track->arrays[i + 0].robj = reloc->robj;
+ track->arrays[i + 0].esize &= 0x7F;
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for packet3 %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ ib[idx+2] = radeon_get_ib_value(p, idx + 2) + ((u32)reloc->lobj.gpu_offset);
+ track->arrays[i + 1].robj = reloc->robj;
+ track->arrays[i + 1].esize = idx_value >> 24;
+ track->arrays[i + 1].esize &= 0x7F;
+ }
+ if (c & 1) {
+ r = r100_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("No reloc for packet3 %d\n",
+ pkt->opcode);
+ r100_cs_dump_packet(p, pkt);
+ return r;
+ }
+ idx_value = radeon_get_ib_value(p, idx);
+ ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+ track->arrays[i + 0].robj = reloc->robj;
+ track->arrays[i + 0].esize = idx_value >> 8;
+ track->arrays[i + 0].esize &= 0x7F;
+ }
+ return r;
+}
#define S_000054_VCRTC_IDX_MASTER(x) (((x) & 0x7F) << 24)
#define G_000054_VCRTC_IDX_MASTER(x) (((x) >> 24) & 0x7F)
#define C_000054_VCRTC_IDX_MASTER 0x80FFFFFF
+#define R_000148_MC_FB_LOCATION 0x000148
+#define S_000148_MC_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000148_MC_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000148_MC_FB_START 0xFFFF0000
+#define S_000148_MC_FB_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000148_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000148_MC_FB_TOP 0x0000FFFF
+#define R_00014C_MC_AGP_LOCATION 0x00014C
+#define S_00014C_MC_AGP_START(x) (((x) & 0xFFFF) << 0)
+#define G_00014C_MC_AGP_START(x) (((x) >> 0) & 0xFFFF)
+#define C_00014C_MC_AGP_START 0xFFFF0000
+#define S_00014C_MC_AGP_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_00014C_MC_AGP_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_00014C_MC_AGP_TOP 0x0000FFFF
+#define R_000170_AGP_BASE 0x000170
+#define S_000170_AGP_BASE_ADDR(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_000170_AGP_BASE_ADDR(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_000170_AGP_BASE_ADDR 0x00000000
#define R_00023C_DISPLAY_BASE_ADDR 0x00023C
#define S_00023C_DISPLAY_BASE_ADDR(x) (((x) & 0xFFFFFFFF) << 0)
#define G_00023C_DISPLAY_BASE_ADDR(x) (((x) >> 0) & 0xFFFFFFFF)
#define S_000360_CUR2_LOCK(x) (((x) & 0x1) << 31)
#define G_000360_CUR2_LOCK(x) (((x) >> 31) & 0x1)
#define C_000360_CUR2_LOCK 0x7FFFFFFF
-#define R_0003C0_GENMO_WT 0x0003C0
-#define S_0003C0_GENMO_MONO_ADDRESS_B(x) (((x) & 0x1) << 0)
-#define G_0003C0_GENMO_MONO_ADDRESS_B(x) (((x) >> 0) & 0x1)
-#define C_0003C0_GENMO_MONO_ADDRESS_B 0xFFFFFFFE
-#define S_0003C0_VGA_RAM_EN(x) (((x) & 0x1) << 1)
-#define G_0003C0_VGA_RAM_EN(x) (((x) >> 1) & 0x1)
-#define C_0003C0_VGA_RAM_EN 0xFFFFFFFD
-#define S_0003C0_VGA_CKSEL(x) (((x) & 0x3) << 2)
-#define G_0003C0_VGA_CKSEL(x) (((x) >> 2) & 0x3)
-#define C_0003C0_VGA_CKSEL 0xFFFFFFF3
-#define S_0003C0_ODD_EVEN_MD_PGSEL(x) (((x) & 0x1) << 5)
-#define G_0003C0_ODD_EVEN_MD_PGSEL(x) (((x) >> 5) & 0x1)
-#define C_0003C0_ODD_EVEN_MD_PGSEL 0xFFFFFFDF
-#define S_0003C0_VGA_HSYNC_POL(x) (((x) & 0x1) << 6)
-#define G_0003C0_VGA_HSYNC_POL(x) (((x) >> 6) & 0x1)
-#define C_0003C0_VGA_HSYNC_POL 0xFFFFFFBF
-#define S_0003C0_VGA_VSYNC_POL(x) (((x) & 0x1) << 7)
-#define G_0003C0_VGA_VSYNC_POL(x) (((x) >> 7) & 0x1)
-#define C_0003C0_VGA_VSYNC_POL 0xFFFFFF7F
+#define R_0003C2_GENMO_WT 0x0003C0
+#define S_0003C2_GENMO_MONO_ADDRESS_B(x) (((x) & 0x1) << 0)
+#define G_0003C2_GENMO_MONO_ADDRESS_B(x) (((x) >> 0) & 0x1)
+#define C_0003C2_GENMO_MONO_ADDRESS_B 0xFE
+#define S_0003C2_VGA_RAM_EN(x) (((x) & 0x1) << 1)
+#define G_0003C2_VGA_RAM_EN(x) (((x) >> 1) & 0x1)
+#define C_0003C2_VGA_RAM_EN 0xFD
+#define S_0003C2_VGA_CKSEL(x) (((x) & 0x3) << 2)
+#define G_0003C2_VGA_CKSEL(x) (((x) >> 2) & 0x3)
+#define C_0003C2_VGA_CKSEL 0xF3
+#define S_0003C2_ODD_EVEN_MD_PGSEL(x) (((x) & 0x1) << 5)
+#define G_0003C2_ODD_EVEN_MD_PGSEL(x) (((x) >> 5) & 0x1)
+#define C_0003C2_ODD_EVEN_MD_PGSEL 0xDF
+#define S_0003C2_VGA_HSYNC_POL(x) (((x) & 0x1) << 6)
+#define G_0003C2_VGA_HSYNC_POL(x) (((x) >> 6) & 0x1)
+#define C_0003C2_VGA_HSYNC_POL 0xBF
+#define S_0003C2_VGA_VSYNC_POL(x) (((x) & 0x1) << 7)
+#define G_0003C2_VGA_VSYNC_POL(x) (((x) >> 7) & 0x1)
+#define C_0003C2_VGA_VSYNC_POL 0x7F
#define R_0003F8_CRTC2_GEN_CNTL 0x0003F8
#define S_0003F8_CRTC2_DBL_SCAN_EN(x) (((x) & 0x1) << 0)
#define G_0003F8_CRTC2_DBL_SCAN_EN(x) (((x) >> 0) & 0x1)
#define S_000774_SCRATCH_ADDR(x) (((x) & 0x7FFFFFF) << 5)
#define G_000774_SCRATCH_ADDR(x) (((x) >> 5) & 0x7FFFFFF)
#define C_000774_SCRATCH_ADDR 0x0000001F
+#define R_0007C0_CP_STAT 0x0007C0
+#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0)
+#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1)
+#define C_0007C0_MRU_BUSY 0xFFFFFFFE
+#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1)
+#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1)
+#define C_0007C0_MWU_BUSY 0xFFFFFFFD
+#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2)
+#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1)
+#define C_0007C0_RSIU_BUSY 0xFFFFFFFB
+#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3)
+#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1)
+#define C_0007C0_RCIU_BUSY 0xFFFFFFF7
+#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9)
+#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1)
+#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF
+#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10)
+#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1)
+#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF
+#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11)
+#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1)
+#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF
+#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12)
+#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1)
+#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF
+#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13)
+#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1)
+#define C_0007C0_CSI_BUSY 0xFFFFDFFF
+#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28)
+#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1)
+#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF
+#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29)
+#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1)
+#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF
+#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30)
+#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1)
+#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF
+#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31)
+#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1)
+#define C_0007C0_CP_BUSY 0x7FFFFFFF
#define R_000E40_RBBM_STATUS 0x000E40
#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0)
#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F)
#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1)
#define C_000E40_GUI_ACTIVE 0x7FFFFFFF
+
+#define R_00000D_SCLK_CNTL 0x00000D
+#define S_00000D_SCLK_SRC_SEL(x) (((x) & 0x7) << 0)
+#define G_00000D_SCLK_SRC_SEL(x) (((x) >> 0) & 0x7)
+#define C_00000D_SCLK_SRC_SEL 0xFFFFFFF8
+#define S_00000D_TCLK_SRC_SEL(x) (((x) & 0x7) << 8)
+#define G_00000D_TCLK_SRC_SEL(x) (((x) >> 8) & 0x7)
+#define C_00000D_TCLK_SRC_SEL 0xFFFFF8FF
+#define S_00000D_FORCE_CP(x) (((x) & 0x1) << 16)
+#define G_00000D_FORCE_CP(x) (((x) >> 16) & 0x1)
+#define C_00000D_FORCE_CP 0xFFFEFFFF
+#define S_00000D_FORCE_HDP(x) (((x) & 0x1) << 17)
+#define G_00000D_FORCE_HDP(x) (((x) >> 17) & 0x1)
+#define C_00000D_FORCE_HDP 0xFFFDFFFF
+#define S_00000D_FORCE_DISP(x) (((x) & 0x1) << 18)
+#define G_00000D_FORCE_DISP(x) (((x) >> 18) & 0x1)
+#define C_00000D_FORCE_DISP 0xFFFBFFFF
+#define S_00000D_FORCE_TOP(x) (((x) & 0x1) << 19)
+#define G_00000D_FORCE_TOP(x) (((x) >> 19) & 0x1)
+#define C_00000D_FORCE_TOP 0xFFF7FFFF
+#define S_00000D_FORCE_E2(x) (((x) & 0x1) << 20)
+#define G_00000D_FORCE_E2(x) (((x) >> 20) & 0x1)
+#define C_00000D_FORCE_E2 0xFFEFFFFF
+#define S_00000D_FORCE_SE(x) (((x) & 0x1) << 21)
+#define G_00000D_FORCE_SE(x) (((x) >> 21) & 0x1)
+#define C_00000D_FORCE_SE 0xFFDFFFFF
+#define S_00000D_FORCE_IDCT(x) (((x) & 0x1) << 22)
+#define G_00000D_FORCE_IDCT(x) (((x) >> 22) & 0x1)
+#define C_00000D_FORCE_IDCT 0xFFBFFFFF
+#define S_00000D_FORCE_VIP(x) (((x) & 0x1) << 23)
+#define G_00000D_FORCE_VIP(x) (((x) >> 23) & 0x1)
+#define C_00000D_FORCE_VIP 0xFF7FFFFF
+#define S_00000D_FORCE_RE(x) (((x) & 0x1) << 24)
+#define G_00000D_FORCE_RE(x) (((x) >> 24) & 0x1)
+#define C_00000D_FORCE_RE 0xFEFFFFFF
+#define S_00000D_FORCE_PB(x) (((x) & 0x1) << 25)
+#define G_00000D_FORCE_PB(x) (((x) >> 25) & 0x1)
+#define C_00000D_FORCE_PB 0xFDFFFFFF
+#define S_00000D_FORCE_TAM(x) (((x) & 0x1) << 26)
+#define G_00000D_FORCE_TAM(x) (((x) >> 26) & 0x1)
+#define C_00000D_FORCE_TAM 0xFBFFFFFF
+#define S_00000D_FORCE_TDM(x) (((x) & 0x1) << 27)
+#define G_00000D_FORCE_TDM(x) (((x) >> 27) & 0x1)
+#define C_00000D_FORCE_TDM 0xF7FFFFFF
+#define S_00000D_FORCE_RB(x) (((x) & 0x1) << 28)
+#define G_00000D_FORCE_RB(x) (((x) >> 28) & 0x1)
+#define C_00000D_FORCE_RB 0xEFFFFFFF
+
+
#endif
struct radeon_cs_packet *pkt,
unsigned idx, unsigned reg)
{
- struct radeon_cs_chunk *ib_chunk;
struct radeon_cs_reloc *reloc;
struct r100_cs_track *track;
volatile uint32_t *ib;
int i;
int face;
u32 tile_flags = 0;
+ u32 idx_value;
ib = p->ib->ptr;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
track = (struct r100_cs_track *)p->track;
-
+ idx_value = radeon_get_ib_value(p, idx);
switch (reg) {
case RADEON_CRTC_GUI_TRIG_VLINE:
r = r100_cs_packet_parse_vline(p);
return r;
}
track->zb.robj = reloc->robj;
- track->zb.offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->zb.offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case RADEON_RB3D_COLOROFFSET:
r = r100_cs_packet_next_reloc(p, &reloc);
return r;
}
track->cb[0].robj = reloc->robj;
- track->cb[0].offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->cb[0].offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case R200_PP_TXOFFSET_0:
case R200_PP_TXOFFSET_1:
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
track->textures[i].robj = reloc->robj;
break;
case R200_PP_CUBIC_OFFSET_F1_0:
r100_cs_dump_packet(p, pkt);
return r;
}
- track->textures[i].cube_info[face - 1].offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->textures[i].cube_info[face - 1].offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
track->textures[i].cube_info[face - 1].robj = reloc->robj;
break;
case RADEON_RE_WIDTH_HEIGHT:
- track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF);
+ track->maxy = ((idx_value >> 16) & 0x7FF);
break;
case RADEON_RB3D_COLORPITCH:
r = r100_cs_packet_next_reloc(p, &reloc);
if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
- tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp = idx_value & ~(0x7 << 16);
tmp |= tile_flags;
ib[idx] = tmp;
- track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK;
+ track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK;
break;
case RADEON_RB3D_DEPTHPITCH:
- track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK;
+ track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK;
break;
case RADEON_RB3D_CNTL:
- switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
+ switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
case 7:
case 8:
case 9:
break;
default:
DRM_ERROR("Invalid color buffer format (%d) !\n",
- ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
+ ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
return -EINVAL;
}
- if (ib_chunk->kdata[idx] & RADEON_DEPTHXY_OFFSET_ENABLE) {
+ if (idx_value & RADEON_DEPTHXY_OFFSET_ENABLE) {
DRM_ERROR("No support for depth xy offset in kms\n");
return -EINVAL;
}
- track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE);
+ track->z_enabled = !!(idx_value & RADEON_Z_ENABLE);
break;
case RADEON_RB3D_ZSTENCILCNTL:
- switch (ib_chunk->kdata[idx] & 0xf) {
+ switch (idx_value & 0xf) {
case 0:
track->zb.cpp = 2;
break;
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case RADEON_PP_CNTL:
{
- uint32_t temp = ib_chunk->kdata[idx] >> 4;
+ uint32_t temp = idx_value >> 4;
for (i = 0; i < track->num_texture; i++)
track->textures[i].enabled = !!(temp & (1 << i));
}
break;
case RADEON_SE_VF_CNTL:
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = idx_value;
break;
case 0x210c:
/* VAP_VF_MAX_VTX_INDX */
- track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+ track->max_indx = idx_value & 0x00FFFFFFUL;
break;
case R200_SE_VTX_FMT_0:
- track->vtx_size = r200_get_vtx_size_0(ib_chunk->kdata[idx]);
+ track->vtx_size = r200_get_vtx_size_0(idx_value);
break;
case R200_SE_VTX_FMT_1:
- track->vtx_size += r200_get_vtx_size_1(ib_chunk->kdata[idx]);
+ track->vtx_size += r200_get_vtx_size_1(idx_value);
break;
case R200_PP_TXSIZE_0:
case R200_PP_TXSIZE_1:
case R200_PP_TXSIZE_4:
case R200_PP_TXSIZE_5:
i = (reg - R200_PP_TXSIZE_0) / 32;
- track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1;
- track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
+ track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1;
+ track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
break;
case R200_PP_TXPITCH_0:
case R200_PP_TXPITCH_1:
case R200_PP_TXPITCH_4:
case R200_PP_TXPITCH_5:
i = (reg - R200_PP_TXPITCH_0) / 32;
- track->textures[i].pitch = ib_chunk->kdata[idx] + 32;
+ track->textures[i].pitch = idx_value + 32;
break;
case R200_PP_TXFILTER_0:
case R200_PP_TXFILTER_1:
case R200_PP_TXFILTER_4:
case R200_PP_TXFILTER_5:
i = (reg - R200_PP_TXFILTER_0) / 32;
- track->textures[i].num_levels = ((ib_chunk->kdata[idx] & R200_MAX_MIP_LEVEL_MASK)
+ track->textures[i].num_levels = ((idx_value & R200_MAX_MIP_LEVEL_MASK)
>> R200_MAX_MIP_LEVEL_SHIFT);
- tmp = (ib_chunk->kdata[idx] >> 23) & 0x7;
+ tmp = (idx_value >> 23) & 0x7;
if (tmp == 2 || tmp == 6)
track->textures[i].roundup_w = false;
- tmp = (ib_chunk->kdata[idx] >> 27) & 0x7;
+ tmp = (idx_value >> 27) & 0x7;
if (tmp == 2 || tmp == 6)
track->textures[i].roundup_h = false;
break;
case R200_PP_TXFORMAT_X_4:
case R200_PP_TXFORMAT_X_5:
i = (reg - R200_PP_TXFORMAT_X_0) / 32;
- track->textures[i].txdepth = ib_chunk->kdata[idx] & 0x7;
- tmp = (ib_chunk->kdata[idx] >> 16) & 0x3;
+ track->textures[i].txdepth = idx_value & 0x7;
+ tmp = (idx_value >> 16) & 0x3;
/* 2D, 3D, CUBE */
switch (tmp) {
case 0:
case R200_PP_TXFORMAT_4:
case R200_PP_TXFORMAT_5:
i = (reg - R200_PP_TXFORMAT_0) / 32;
- if (ib_chunk->kdata[idx] & R200_TXFORMAT_NON_POWER2) {
+ if (idx_value & R200_TXFORMAT_NON_POWER2) {
track->textures[i].use_pitch = 1;
} else {
track->textures[i].use_pitch = 0;
- track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
- track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
+ track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
+ track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
}
- switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) {
+ switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) {
case R200_TXFORMAT_I8:
case R200_TXFORMAT_RGB332:
case R200_TXFORMAT_Y8:
track->textures[i].cpp = 4;
break;
}
- track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf);
- track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf);
+ track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf);
+ track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf);
break;
case R200_PP_CUBIC_FACES_0:
case R200_PP_CUBIC_FACES_1:
case R200_PP_CUBIC_FACES_3:
case R200_PP_CUBIC_FACES_4:
case R200_PP_CUBIC_FACES_5:
- tmp = ib_chunk->kdata[idx];
+ tmp = idx_value;
i = (reg - R200_PP_CUBIC_FACES_0) / 32;
for (face = 0; face < 4; face++) {
track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf);
return 0;
}
-int r200_init(struct radeon_device *rdev)
+void r200_set_safe_registers(struct radeon_device *rdev)
{
rdev->config.r100.reg_safe_bm = r200_reg_safe_bm;
rdev->config.r100.reg_safe_bm_size = ARRAY_SIZE(r200_reg_safe_bm);
- return 0;
}
#include "radeon_drm.h"
#include "r100_track.h"
#include "r300d.h"
-
+#include "rv350d.h"
#include "r300_reg_safe.h"
-/* r300,r350,rv350,rv370,rv380 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r100_cp_reset(struct radeon_device *rdev);
-int r100_rb2d_reset(struct radeon_device *rdev);
-int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-int r100_pci_gart_enable(struct radeon_device *rdev);
-void r100_mc_setup(struct radeon_device *rdev);
-void r100_mc_disable_clients(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r100_cs_packet_parse(struct radeon_cs_parser *p,
- struct radeon_cs_packet *pkt,
- unsigned idx);
-int r100_cs_packet_parse_vline(struct radeon_cs_parser *p);
-int r100_cs_parse_packet0(struct radeon_cs_parser *p,
- struct radeon_cs_packet *pkt,
- const unsigned *auth, unsigned n,
- radeon_packet0_check_t check);
-int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
- struct radeon_cs_packet *pkt,
- struct radeon_object *robj);
-
-/* This files gather functions specifics to:
- * r300,r350,rv350,rv370,rv380
- *
- * Some of these functions might be used by newer ASICs.
- */
-void r300_gpu_init(struct radeon_device *rdev);
-int r300_mc_wait_for_idle(struct radeon_device *rdev);
-int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
-
+/* This files gather functions specifics to: r300,r350,rv350,rv370,rv380 */
/*
* rv370,rv380 PCIE GART
*/
+static int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
+
void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev)
{
uint32_t tmp;
radeon_gart_fini(rdev);
}
-/*
- * MC
- */
-int r300_mc_init(struct radeon_device *rdev)
-{
- int r;
-
- if (r100_debugfs_rbbm_init(rdev)) {
- DRM_ERROR("Failed to register debugfs file for RBBM !\n");
- }
-
- r300_gpu_init(rdev);
- r100_pci_gart_disable(rdev);
- if (rdev->flags & RADEON_IS_PCIE) {
- rv370_pcie_gart_disable(rdev);
- }
-
- /* Setup GPU memory space */
- rdev->mc.vram_location = 0xFFFFFFFFUL;
- rdev->mc.gtt_location = 0xFFFFFFFFUL;
- if (rdev->flags & RADEON_IS_AGP) {
- r = radeon_agp_init(rdev);
- if (r) {
- printk(KERN_WARNING "[drm] Disabling AGP\n");
- rdev->flags &= ~RADEON_IS_AGP;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
- } else {
- rdev->mc.gtt_location = rdev->mc.agp_base;
- }
- }
- r = radeon_mc_setup(rdev);
- if (r) {
- return r;
- }
-
- /* Program GPU memory space */
- r100_mc_disable_clients(rdev);
- if (r300_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
- }
- r100_mc_setup(rdev);
- return 0;
-}
-
-void r300_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Fence emission
- */
void r300_fence_ring_emit(struct radeon_device *rdev,
struct radeon_fence *fence)
{
radeon_ring_write(rdev, RADEON_SW_INT_FIRE);
}
-
-/*
- * Global GPU functions
- */
int r300_copy_dma(struct radeon_device *rdev,
uint64_t src_offset,
uint64_t dst_offset,
r100_vram_init_sizes(rdev);
}
-
-/*
- * PCIE Lanes
- */
-
void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes)
{
uint32_t link_width_cntl, mask;
}
-
-/*
- * Debugfs info
- */
#if defined(CONFIG_DEBUG_FS)
static int rv370_debugfs_pcie_gart_info(struct seq_file *m, void *data)
{
};
#endif
-int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
+static int rv370_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
{
#if defined(CONFIG_DEBUG_FS)
return radeon_debugfs_add_files(rdev, rv370_pcie_gart_info_list, 1);
#endif
}
-
-/*
- * CS functions
- */
static int r300_packet0_check(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt,
unsigned idx, unsigned reg)
{
- struct radeon_cs_chunk *ib_chunk;
struct radeon_cs_reloc *reloc;
struct r100_cs_track *track;
volatile uint32_t *ib;
uint32_t tmp, tile_flags = 0;
unsigned i;
int r;
+ u32 idx_value;
ib = p->ib->ptr;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
track = (struct r100_cs_track *)p->track;
+ idx_value = radeon_get_ib_value(p, idx);
+
switch(reg) {
case AVIVO_D1MODE_VLINE_START_END:
case RADEON_CRTC_GUI_TRIG_VLINE:
return r;
}
track->cb[i].robj = reloc->robj;
- track->cb[i].offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->cb[i].offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case R300_ZB_DEPTHOFFSET:
r = r100_cs_packet_next_reloc(p, &reloc);
return r;
}
track->zb.robj = reloc->robj;
- track->zb.offset = ib_chunk->kdata[idx];
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ track->zb.offset = idx_value;
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case R300_TX_OFFSET_0:
case R300_TX_OFFSET_0+4:
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
track->textures[i].robj = reloc->robj;
break;
/* Tracked registers */
case 0x2084:
/* VAP_VF_CNTL */
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = idx_value;
break;
case 0x20B4:
/* VAP_VTX_SIZE */
- track->vtx_size = ib_chunk->kdata[idx] & 0x7F;
+ track->vtx_size = idx_value & 0x7F;
break;
case 0x2134:
/* VAP_VF_MAX_VTX_INDX */
- track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+ track->max_indx = idx_value & 0x00FFFFFFUL;
break;
case 0x43E4:
/* SC_SCISSOR1 */
- track->maxy = ((ib_chunk->kdata[idx] >> 13) & 0x1FFF) + 1;
+ track->maxy = ((idx_value >> 13) & 0x1FFF) + 1;
if (p->rdev->family < CHIP_RV515) {
track->maxy -= 1440;
}
break;
case 0x4E00:
/* RB3D_CCTL */
- track->num_cb = ((ib_chunk->kdata[idx] >> 5) & 0x3) + 1;
+ track->num_cb = ((idx_value >> 5) & 0x3) + 1;
break;
case 0x4E38:
case 0x4E3C:
if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
tile_flags |= R300_COLOR_MICROTILE_ENABLE;
- tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp = idx_value & ~(0x7 << 16);
tmp |= tile_flags;
ib[idx] = tmp;
i = (reg - 0x4E38) >> 2;
- track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
- switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
+ track->cb[i].pitch = idx_value & 0x3FFE;
+ switch (((idx_value >> 21) & 0xF)) {
case 9:
case 11:
case 12:
break;
default:
DRM_ERROR("Invalid color buffer format (%d) !\n",
- ((ib_chunk->kdata[idx] >> 21) & 0xF));
+ ((idx_value >> 21) & 0xF));
return -EINVAL;
}
break;
case 0x4F00:
/* ZB_CNTL */
- if (ib_chunk->kdata[idx] & 2) {
+ if (idx_value & 2) {
track->z_enabled = true;
} else {
track->z_enabled = false;
break;
case 0x4F10:
/* ZB_FORMAT */
- switch ((ib_chunk->kdata[idx] & 0xF)) {
+ switch ((idx_value & 0xF)) {
case 0:
case 1:
track->zb.cpp = 2;
break;
default:
DRM_ERROR("Invalid z buffer format (%d) !\n",
- (ib_chunk->kdata[idx] & 0xF));
+ (idx_value & 0xF));
return -EINVAL;
}
break;
if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
tile_flags |= R300_DEPTHMICROTILE_TILED;;
- tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+ tmp = idx_value & ~(0x7 << 16);
tmp |= tile_flags;
ib[idx] = tmp;
- track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
+ track->zb.pitch = idx_value & 0x3FFC;
break;
case 0x4104:
for (i = 0; i < 16; i++) {
bool enabled;
- enabled = !!(ib_chunk->kdata[idx] & (1 << i));
+ enabled = !!(idx_value & (1 << i));
track->textures[i].enabled = enabled;
}
break;
case 0x44FC:
/* TX_FORMAT1_[0-15] */
i = (reg - 0x44C0) >> 2;
- tmp = (ib_chunk->kdata[idx] >> 25) & 0x3;
+ tmp = (idx_value >> 25) & 0x3;
track->textures[i].tex_coord_type = tmp;
- switch ((ib_chunk->kdata[idx] & 0x1F)) {
+ switch ((idx_value & 0x1F)) {
case R300_TX_FORMAT_X8:
case R300_TX_FORMAT_Y4X4:
case R300_TX_FORMAT_Z3Y3X2:
break;
default:
DRM_ERROR("Invalid texture format %u\n",
- (ib_chunk->kdata[idx] & 0x1F));
+ (idx_value & 0x1F));
return -EINVAL;
break;
}
case 0x443C:
/* TX_FILTER0_[0-15] */
i = (reg - 0x4400) >> 2;
- tmp = ib_chunk->kdata[idx] & 0x7;
+ tmp = idx_value & 0x7;
if (tmp == 2 || tmp == 4 || tmp == 6) {
track->textures[i].roundup_w = false;
}
- tmp = (ib_chunk->kdata[idx] >> 3) & 0x7;
+ tmp = (idx_value >> 3) & 0x7;
if (tmp == 2 || tmp == 4 || tmp == 6) {
track->textures[i].roundup_h = false;
}
case 0x453C:
/* TX_FORMAT2_[0-15] */
i = (reg - 0x4500) >> 2;
- tmp = ib_chunk->kdata[idx] & 0x3FFF;
+ tmp = idx_value & 0x3FFF;
track->textures[i].pitch = tmp + 1;
if (p->rdev->family >= CHIP_RV515) {
- tmp = ((ib_chunk->kdata[idx] >> 15) & 1) << 11;
+ tmp = ((idx_value >> 15) & 1) << 11;
track->textures[i].width_11 = tmp;
- tmp = ((ib_chunk->kdata[idx] >> 16) & 1) << 11;
+ tmp = ((idx_value >> 16) & 1) << 11;
track->textures[i].height_11 = tmp;
}
break;
case 0x44BC:
/* TX_FORMAT0_[0-15] */
i = (reg - 0x4480) >> 2;
- tmp = ib_chunk->kdata[idx] & 0x7FF;
+ tmp = idx_value & 0x7FF;
track->textures[i].width = tmp + 1;
- tmp = (ib_chunk->kdata[idx] >> 11) & 0x7FF;
+ tmp = (idx_value >> 11) & 0x7FF;
track->textures[i].height = tmp + 1;
- tmp = (ib_chunk->kdata[idx] >> 26) & 0xF;
+ tmp = (idx_value >> 26) & 0xF;
track->textures[i].num_levels = tmp;
- tmp = ib_chunk->kdata[idx] & (1 << 31);
+ tmp = idx_value & (1 << 31);
track->textures[i].use_pitch = !!tmp;
- tmp = (ib_chunk->kdata[idx] >> 22) & 0xF;
+ tmp = (idx_value >> 22) & 0xF;
track->textures[i].txdepth = tmp;
break;
case R300_ZB_ZPASS_ADDR:
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
break;
case 0x4be8:
/* valid register only on RV530 */
static int r300_packet3_check(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt)
{
- struct radeon_cs_chunk *ib_chunk;
-
struct radeon_cs_reloc *reloc;
struct r100_cs_track *track;
volatile uint32_t *ib;
unsigned idx;
- unsigned i, c;
int r;
ib = p->ib->ptr;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
idx = pkt->idx + 1;
track = (struct r100_cs_track *)p->track;
switch(pkt->opcode) {
case PACKET3_3D_LOAD_VBPNTR:
- c = ib_chunk->kdata[idx++] & 0x1F;
- track->num_arrays = c;
- for (i = 0; i < (c - 1); i+=2, idx+=3) {
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
- track->arrays[i + 0].robj = reloc->robj;
- track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
- track->arrays[i + 0].esize &= 0x7F;
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
- track->arrays[i + 1].robj = reloc->robj;
- track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
- track->arrays[i + 1].esize &= 0x7F;
- }
- if (c & 1) {
- r = r100_cs_packet_next_reloc(p, &reloc);
- if (r) {
- DRM_ERROR("No reloc for packet3 %d\n",
- pkt->opcode);
- r100_cs_dump_packet(p, pkt);
- return r;
- }
- ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
- track->arrays[i + 0].robj = reloc->robj;
- track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
- track->arrays[i + 0].esize &= 0x7F;
- }
+ r = r100_packet3_load_vbpntr(p, pkt, idx);
+ if (r)
+ return r;
break;
case PACKET3_INDX_BUFFER:
r = r100_cs_packet_next_reloc(p, &reloc);
r100_cs_dump_packet(p, pkt);
return r;
}
- ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+ ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
if (r) {
return r;
/* Number of dwords is vtx_size * (num_vertices - 1)
* PRIM_WALK must be equal to 3 vertex data in embedded
* in cmd stream */
- if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+ if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) {
DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
return -EINVAL;
}
- track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
track->immd_dwords = pkt->count - 1;
r = r100_cs_track_check(p->rdev, track);
if (r) {
/* Number of dwords is vtx_size * (num_vertices - 1)
* PRIM_WALK must be equal to 3 vertex data in embedded
* in cmd stream */
- if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+ if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) {
DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
return -EINVAL;
}
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx);
track->immd_dwords = pkt->count;
r = r100_cs_track_check(p->rdev, track);
if (r) {
}
break;
case PACKET3_3D_DRAW_VBUF:
- track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
r = r100_cs_track_check(p->rdev, track);
if (r) {
return r;
}
break;
case PACKET3_3D_DRAW_VBUF_2:
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx);
r = r100_cs_track_check(p->rdev, track);
if (r) {
return r;
}
break;
case PACKET3_3D_DRAW_INDX:
- track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
r = r100_cs_track_check(p->rdev, track);
if (r) {
return r;
}
break;
case PACKET3_3D_DRAW_INDX_2:
- track->vap_vf_cntl = ib_chunk->kdata[idx];
+ track->vap_vf_cntl = radeon_get_ib_value(p, idx);
r = r100_cs_track_check(p->rdev, track);
if (r) {
return r;
rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r300_reg_safe_bm);
}
-int r300_init(struct radeon_device *rdev)
-{
- r300_set_reg_safe(rdev);
- return 0;
-}
-
void r300_mc_program(struct radeon_device *rdev)
{
struct r100_mc_save save;
S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16));
r100_mc_resume(rdev, &save);
}
+
+void r300_clock_startup(struct radeon_device *rdev)
+{
+ u32 tmp;
+
+ if (radeon_dynclks != -1 && radeon_dynclks)
+ radeon_legacy_set_clock_gating(rdev, 1);
+ /* We need to force on some of the block */
+ tmp = RREG32_PLL(R_00000D_SCLK_CNTL);
+ tmp |= S_00000D_FORCE_CP(1) | S_00000D_FORCE_VIP(1);
+ if ((rdev->family == CHIP_RV350) || (rdev->family == CHIP_RV380))
+ tmp |= S_00000D_FORCE_VAP(1);
+ WREG32_PLL(R_00000D_SCLK_CNTL, tmp);
+}
+
+static int r300_startup(struct radeon_device *rdev)
+{
+ int r;
+
+ r300_mc_program(rdev);
+ /* Resume clock */
+ r300_clock_startup(rdev);
+ /* Initialize GPU configuration (# pipes, ...) */
+ r300_gpu_init(rdev);
+ /* Initialize GART (initialize after TTM so we can allocate
+ * memory through TTM but finalize after TTM) */
+ if (rdev->flags & RADEON_IS_PCIE) {
+ r = rv370_pcie_gart_enable(rdev);
+ if (r)
+ return r;
+ }
+ if (rdev->flags & RADEON_IS_PCI) {
+ r = r100_pci_gart_enable(rdev);
+ if (r)
+ return r;
+ }
+ /* Enable IRQ */
+ rdev->irq.sw_int = true;
+ r100_irq_set(rdev);
+ /* 1M ring buffer */
+ r = r100_cp_init(rdev, 1024 * 1024);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+ return r;
+ }
+ r = r100_wb_init(rdev);
+ if (r)
+ dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+ r = r100_ib_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+ return r;
+ }
+ return 0;
+}
+
+int r300_resume(struct radeon_device *rdev)
+{
+ /* Make sur GART are not working */
+ if (rdev->flags & RADEON_IS_PCIE)
+ rv370_pcie_gart_disable(rdev);
+ if (rdev->flags & RADEON_IS_PCI)
+ r100_pci_gart_disable(rdev);
+ /* Resume clock before doing reset */
+ r300_clock_startup(rdev);
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* post */
+ radeon_combios_asic_init(rdev->ddev);
+ /* Resume clock after posting */
+ r300_clock_startup(rdev);
+ return r300_startup(rdev);
+}
+
+int r300_suspend(struct radeon_device *rdev)
+{
+ r100_cp_disable(rdev);
+ r100_wb_disable(rdev);
+ r100_irq_disable(rdev);
+ if (rdev->flags & RADEON_IS_PCIE)
+ rv370_pcie_gart_disable(rdev);
+ if (rdev->flags & RADEON_IS_PCI)
+ r100_pci_gart_disable(rdev);
+ return 0;
+}
+
+void r300_fini(struct radeon_device *rdev)
+{
+ r300_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ radeon_gem_fini(rdev);
+ if (rdev->flags & RADEON_IS_PCIE)
+ rv370_pcie_gart_fini(rdev);
+ if (rdev->flags & RADEON_IS_PCI)
+ r100_pci_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ radeon_fence_driver_fini(rdev);
+ radeon_object_fini(rdev);
+ radeon_atombios_fini(rdev);
+ kfree(rdev->bios);
+ rdev->bios = NULL;
+}
+
+int r300_init(struct radeon_device *rdev)
+{
+ int r;
+
+ /* Disable VGA */
+ r100_vga_render_disable(rdev);
+ /* Initialize scratch registers */
+ radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
+ /* TODO: disable VGA need to use VGA request */
+ /* BIOS*/
+ if (!radeon_get_bios(rdev)) {
+ if (ASIC_IS_AVIVO(rdev))
+ return -EINVAL;
+ }
+ if (rdev->is_atom_bios) {
+ dev_err(rdev->dev, "Expecting combios for RS400/RS480 GPU\n");
+ return -EINVAL;
+ } else {
+ r = radeon_combios_init(rdev);
+ if (r)
+ return r;
+ }
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev,
+ "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* check if cards are posted or not */
+ if (!radeon_card_posted(rdev) && rdev->bios) {
+ DRM_INFO("GPU not posted. posting now...\n");
+ radeon_combios_asic_init(rdev->ddev);
+ }
+ /* Set asic errata */
+ r300_errata(rdev);
+ /* Initialize clocks */
+ radeon_get_clock_info(rdev->ddev);
+ /* Get vram informations */
+ r300_vram_info(rdev);
+ /* Initialize memory controller (also test AGP) */
+ r = r420_mc_init(rdev);
+ if (r)
+ return r;
+ /* Fence driver */
+ r = radeon_fence_driver_init(rdev);
+ if (r)
+ return r;
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ /* Memory manager */
+ r = radeon_object_init(rdev);
+ if (r)
+ return r;
+ if (rdev->flags & RADEON_IS_PCIE) {
+ r = rv370_pcie_gart_init(rdev);
+ if (r)
+ return r;
+ }
+ if (rdev->flags & RADEON_IS_PCI) {
+ r = r100_pci_gart_init(rdev);
+ if (r)
+ return r;
+ }
+ r300_set_reg_safe(rdev);
+ rdev->accel_working = true;
+ r = r300_startup(rdev);
+ if (r) {
+ /* Somethings want wront with the accel init stop accel */
+ dev_err(rdev->dev, "Disabling GPU acceleration\n");
+ r300_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ if (rdev->flags & RADEON_IS_PCIE)
+ rv370_pcie_gart_fini(rdev);
+ if (rdev->flags & RADEON_IS_PCI)
+ r100_pci_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ rdev->accel_working = false;
+ }
+ return 0;
+}
#define S_000170_AGP_BASE_ADDR(x) (((x) & 0xFFFFFFFF) << 0)
#define G_000170_AGP_BASE_ADDR(x) (((x) >> 0) & 0xFFFFFFFF)
#define C_000170_AGP_BASE_ADDR 0x00000000
+#define R_0007C0_CP_STAT 0x0007C0
+#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0)
+#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1)
+#define C_0007C0_MRU_BUSY 0xFFFFFFFE
+#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1)
+#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1)
+#define C_0007C0_MWU_BUSY 0xFFFFFFFD
+#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2)
+#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1)
+#define C_0007C0_RSIU_BUSY 0xFFFFFFFB
+#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3)
+#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1)
+#define C_0007C0_RCIU_BUSY 0xFFFFFFF7
+#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9)
+#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1)
+#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF
+#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10)
+#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1)
+#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF
+#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11)
+#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1)
+#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF
+#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12)
+#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1)
+#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF
+#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13)
+#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1)
+#define C_0007C0_CSI_BUSY 0xFFFFDFFF
+#define S_0007C0_CSF_INDIRECT2_BUSY(x) (((x) & 0x1) << 14)
+#define G_0007C0_CSF_INDIRECT2_BUSY(x) (((x) >> 14) & 0x1)
+#define C_0007C0_CSF_INDIRECT2_BUSY 0xFFFFBFFF
+#define S_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) & 0x1) << 15)
+#define G_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) >> 15) & 0x1)
+#define C_0007C0_CSQ_INDIRECT2_BUSY 0xFFFF7FFF
+#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28)
+#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1)
+#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF
+#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29)
+#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1)
+#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF
+#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30)
+#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1)
+#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF
+#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31)
+#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1)
+#define C_0007C0_CP_BUSY 0x7FFFFFFF
+#define R_000E40_RBBM_STATUS 0x000E40
+#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0)
+#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F)
+#define C_000E40_CMDFIFO_AVAIL 0xFFFFFF80
+#define S_000E40_HIRQ_ON_RBB(x) (((x) & 0x1) << 8)
+#define G_000E40_HIRQ_ON_RBB(x) (((x) >> 8) & 0x1)
+#define C_000E40_HIRQ_ON_RBB 0xFFFFFEFF
+#define S_000E40_CPRQ_ON_RBB(x) (((x) & 0x1) << 9)
+#define G_000E40_CPRQ_ON_RBB(x) (((x) >> 9) & 0x1)
+#define C_000E40_CPRQ_ON_RBB 0xFFFFFDFF
+#define S_000E40_CFRQ_ON_RBB(x) (((x) & 0x1) << 10)
+#define G_000E40_CFRQ_ON_RBB(x) (((x) >> 10) & 0x1)
+#define C_000E40_CFRQ_ON_RBB 0xFFFFFBFF
+#define S_000E40_HIRQ_IN_RTBUF(x) (((x) & 0x1) << 11)
+#define G_000E40_HIRQ_IN_RTBUF(x) (((x) >> 11) & 0x1)
+#define C_000E40_HIRQ_IN_RTBUF 0xFFFFF7FF
+#define S_000E40_CPRQ_IN_RTBUF(x) (((x) & 0x1) << 12)
+#define G_000E40_CPRQ_IN_RTBUF(x) (((x) >> 12) & 0x1)
+#define C_000E40_CPRQ_IN_RTBUF 0xFFFFEFFF
+#define S_000E40_CFRQ_IN_RTBUF(x) (((x) & 0x1) << 13)
+#define G_000E40_CFRQ_IN_RTBUF(x) (((x) >> 13) & 0x1)
+#define C_000E40_CFRQ_IN_RTBUF 0xFFFFDFFF
+#define S_000E40_CF_PIPE_BUSY(x) (((x) & 0x1) << 14)
+#define G_000E40_CF_PIPE_BUSY(x) (((x) >> 14) & 0x1)
+#define C_000E40_CF_PIPE_BUSY 0xFFFFBFFF
+#define S_000E40_ENG_EV_BUSY(x) (((x) & 0x1) << 15)
+#define G_000E40_ENG_EV_BUSY(x) (((x) >> 15) & 0x1)
+#define C_000E40_ENG_EV_BUSY 0xFFFF7FFF
+#define S_000E40_CP_CMDSTRM_BUSY(x) (((x) & 0x1) << 16)
+#define G_000E40_CP_CMDSTRM_BUSY(x) (((x) >> 16) & 0x1)
+#define C_000E40_CP_CMDSTRM_BUSY 0xFFFEFFFF
+#define S_000E40_E2_BUSY(x) (((x) & 0x1) << 17)
+#define G_000E40_E2_BUSY(x) (((x) >> 17) & 0x1)
+#define C_000E40_E2_BUSY 0xFFFDFFFF
+#define S_000E40_RB2D_BUSY(x) (((x) & 0x1) << 18)
+#define G_000E40_RB2D_BUSY(x) (((x) >> 18) & 0x1)
+#define C_000E40_RB2D_BUSY 0xFFFBFFFF
+#define S_000E40_RB3D_BUSY(x) (((x) & 0x1) << 19)
+#define G_000E40_RB3D_BUSY(x) (((x) >> 19) & 0x1)
+#define C_000E40_RB3D_BUSY 0xFFF7FFFF
+#define S_000E40_VAP_BUSY(x) (((x) & 0x1) << 20)
+#define G_000E40_VAP_BUSY(x) (((x) >> 20) & 0x1)
+#define C_000E40_VAP_BUSY 0xFFEFFFFF
+#define S_000E40_RE_BUSY(x) (((x) & 0x1) << 21)
+#define G_000E40_RE_BUSY(x) (((x) >> 21) & 0x1)
+#define C_000E40_RE_BUSY 0xFFDFFFFF
+#define S_000E40_TAM_BUSY(x) (((x) & 0x1) << 22)
+#define G_000E40_TAM_BUSY(x) (((x) >> 22) & 0x1)
+#define C_000E40_TAM_BUSY 0xFFBFFFFF
+#define S_000E40_TDM_BUSY(x) (((x) & 0x1) << 23)
+#define G_000E40_TDM_BUSY(x) (((x) >> 23) & 0x1)
+#define C_000E40_TDM_BUSY 0xFF7FFFFF
+#define S_000E40_PB_BUSY(x) (((x) & 0x1) << 24)
+#define G_000E40_PB_BUSY(x) (((x) >> 24) & 0x1)
+#define C_000E40_PB_BUSY 0xFEFFFFFF
+#define S_000E40_TIM_BUSY(x) (((x) & 0x1) << 25)
+#define G_000E40_TIM_BUSY(x) (((x) >> 25) & 0x1)
+#define C_000E40_TIM_BUSY 0xFDFFFFFF
+#define S_000E40_GA_BUSY(x) (((x) & 0x1) << 26)
+#define G_000E40_GA_BUSY(x) (((x) >> 26) & 0x1)
+#define C_000E40_GA_BUSY 0xFBFFFFFF
+#define S_000E40_CBA2D_BUSY(x) (((x) & 0x1) << 27)
+#define G_000E40_CBA2D_BUSY(x) (((x) >> 27) & 0x1)
+#define C_000E40_CBA2D_BUSY 0xF7FFFFFF
+#define S_000E40_GUI_ACTIVE(x) (((x) & 0x1) << 31)
+#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1)
+#define C_000E40_GUI_ACTIVE 0x7FFFFFFF
+#define R_00000D_SCLK_CNTL 0x00000D
+#define S_00000D_SCLK_SRC_SEL(x) (((x) & 0x7) << 0)
+#define G_00000D_SCLK_SRC_SEL(x) (((x) >> 0) & 0x7)
+#define C_00000D_SCLK_SRC_SEL 0xFFFFFFF8
+#define S_00000D_CP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 3)
+#define G_00000D_CP_MAX_DYN_STOP_LAT(x) (((x) >> 3) & 0x1)
+#define C_00000D_CP_MAX_DYN_STOP_LAT 0xFFFFFFF7
+#define S_00000D_HDP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 4)
+#define G_00000D_HDP_MAX_DYN_STOP_LAT(x) (((x) >> 4) & 0x1)
+#define C_00000D_HDP_MAX_DYN_STOP_LAT 0xFFFFFFEF
+#define S_00000D_TV_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 5)
+#define G_00000D_TV_MAX_DYN_STOP_LAT(x) (((x) >> 5) & 0x1)
+#define C_00000D_TV_MAX_DYN_STOP_LAT 0xFFFFFFDF
+#define S_00000D_E2_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 6)
+#define G_00000D_E2_MAX_DYN_STOP_LAT(x) (((x) >> 6) & 0x1)
+#define C_00000D_E2_MAX_DYN_STOP_LAT 0xFFFFFFBF
+#define S_00000D_SE_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 7)
+#define G_00000D_SE_MAX_DYN_STOP_LAT(x) (((x) >> 7) & 0x1)
+#define C_00000D_SE_MAX_DYN_STOP_LAT 0xFFFFFF7F
+#define S_00000D_IDCT_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 8)
+#define G_00000D_IDCT_MAX_DYN_STOP_LAT(x) (((x) >> 8) & 0x1)
+#define C_00000D_IDCT_MAX_DYN_STOP_LAT 0xFFFFFEFF
+#define S_00000D_VIP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 9)
+#define G_00000D_VIP_MAX_DYN_STOP_LAT(x) (((x) >> 9) & 0x1)
+#define C_00000D_VIP_MAX_DYN_STOP_LAT 0xFFFFFDFF
+#define S_00000D_RE_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 10)
+#define G_00000D_RE_MAX_DYN_STOP_LAT(x) (((x) >> 10) & 0x1)
+#define C_00000D_RE_MAX_DYN_STOP_LAT 0xFFFFFBFF
+#define S_00000D_PB_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 11)
+#define G_00000D_PB_MAX_DYN_STOP_LAT(x) (((x) >> 11) & 0x1)
+#define C_00000D_PB_MAX_DYN_STOP_LAT 0xFFFFF7FF
+#define S_00000D_TAM_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 12)
+#define G_00000D_TAM_MAX_DYN_STOP_LAT(x) (((x) >> 12) & 0x1)
+#define C_00000D_TAM_MAX_DYN_STOP_LAT 0xFFFFEFFF
+#define S_00000D_TDM_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 13)
+#define G_00000D_TDM_MAX_DYN_STOP_LAT(x) (((x) >> 13) & 0x1)
+#define C_00000D_TDM_MAX_DYN_STOP_LAT 0xFFFFDFFF
+#define S_00000D_RB_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 14)
+#define G_00000D_RB_MAX_DYN_STOP_LAT(x) (((x) >> 14) & 0x1)
+#define C_00000D_RB_MAX_DYN_STOP_LAT 0xFFFFBFFF
+#define S_00000D_FORCE_DISP2(x) (((x) & 0x1) << 15)
+#define G_00000D_FORCE_DISP2(x) (((x) >> 15) & 0x1)
+#define C_00000D_FORCE_DISP2 0xFFFF7FFF
+#define S_00000D_FORCE_CP(x) (((x) & 0x1) << 16)
+#define G_00000D_FORCE_CP(x) (((x) >> 16) & 0x1)
+#define C_00000D_FORCE_CP 0xFFFEFFFF
+#define S_00000D_FORCE_HDP(x) (((x) & 0x1) << 17)
+#define G_00000D_FORCE_HDP(x) (((x) >> 17) & 0x1)
+#define C_00000D_FORCE_HDP 0xFFFDFFFF
+#define S_00000D_FORCE_DISP1(x) (((x) & 0x1) << 18)
+#define G_00000D_FORCE_DISP1(x) (((x) >> 18) & 0x1)
+#define C_00000D_FORCE_DISP1 0xFFFBFFFF
+#define S_00000D_FORCE_TOP(x) (((x) & 0x1) << 19)
+#define G_00000D_FORCE_TOP(x) (((x) >> 19) & 0x1)
+#define C_00000D_FORCE_TOP 0xFFF7FFFF
+#define S_00000D_FORCE_E2(x) (((x) & 0x1) << 20)
+#define G_00000D_FORCE_E2(x) (((x) >> 20) & 0x1)
+#define C_00000D_FORCE_E2 0xFFEFFFFF
+#define S_00000D_FORCE_SE(x) (((x) & 0x1) << 21)
+#define G_00000D_FORCE_SE(x) (((x) >> 21) & 0x1)
+#define C_00000D_FORCE_SE 0xFFDFFFFF
+#define S_00000D_FORCE_IDCT(x) (((x) & 0x1) << 22)
+#define G_00000D_FORCE_IDCT(x) (((x) >> 22) & 0x1)
+#define C_00000D_FORCE_IDCT 0xFFBFFFFF
+#define S_00000D_FORCE_VIP(x) (((x) & 0x1) << 23)
+#define G_00000D_FORCE_VIP(x) (((x) >> 23) & 0x1)
+#define C_00000D_FORCE_VIP 0xFF7FFFFF
+#define S_00000D_FORCE_RE(x) (((x) & 0x1) << 24)
+#define G_00000D_FORCE_RE(x) (((x) >> 24) & 0x1)
+#define C_00000D_FORCE_RE 0xFEFFFFFF
+#define S_00000D_FORCE_PB(x) (((x) & 0x1) << 25)
+#define G_00000D_FORCE_PB(x) (((x) >> 25) & 0x1)
+#define C_00000D_FORCE_PB 0xFDFFFFFF
+#define S_00000D_FORCE_TAM(x) (((x) & 0x1) << 26)
+#define G_00000D_FORCE_TAM(x) (((x) >> 26) & 0x1)
+#define C_00000D_FORCE_TAM 0xFBFFFFFF
+#define S_00000D_FORCE_TDM(x) (((x) & 0x1) << 27)
+#define G_00000D_FORCE_TDM(x) (((x) >> 27) & 0x1)
+#define C_00000D_FORCE_TDM 0xF7FFFFFF
+#define S_00000D_FORCE_RB(x) (((x) & 0x1) << 28)
+#define G_00000D_FORCE_RB(x) (((x) >> 28) & 0x1)
+#define C_00000D_FORCE_RB 0xEFFFFFFF
+#define S_00000D_FORCE_TV_SCLK(x) (((x) & 0x1) << 29)
+#define G_00000D_FORCE_TV_SCLK(x) (((x) >> 29) & 0x1)
+#define C_00000D_FORCE_TV_SCLK 0xDFFFFFFF
+#define S_00000D_FORCE_SUBPIC(x) (((x) & 0x1) << 30)
+#define G_00000D_FORCE_SUBPIC(x) (((x) >> 30) & 0x1)
+#define C_00000D_FORCE_SUBPIC 0xBFFFFFFF
+#define S_00000D_FORCE_OV0(x) (((x) & 0x1) << 31)
+#define G_00000D_FORCE_OV0(x) (((x) >> 31) & 0x1)
+#define C_00000D_FORCE_OV0 0x7FFFFFFF
+
#endif
static void r420_clock_resume(struct radeon_device *rdev)
{
u32 sclk_cntl;
+
+ if (radeon_dynclks != -1 && radeon_dynclks)
+ radeon_atom_set_clock_gating(rdev, 1);
sclk_cntl = RREG32_PLL(R_00000D_SCLK_CNTL);
sclk_cntl |= S_00000D_FORCE_CP(1) | S_00000D_FORCE_VIP(1);
if (rdev->family == CHIP_R420)
int r;
r300_mc_program(rdev);
+ /* Resume clock */
+ r420_clock_resume(rdev);
/* Initialize GART (initialize after TTM so we can allocate
* memory through TTM but finalize after TTM) */
if (rdev->flags & RADEON_IS_PCIE) {
{
int r;
- rdev->new_init_path = true;
/* Initialize scratch registers */
radeon_scratch_init(rdev);
/* Initialize surface registers */
#define S_00000D_FORCE_E2(x) (((x) & 0x1) << 20)
#define G_00000D_FORCE_E2(x) (((x) >> 20) & 0x1)
#define C_00000D_FORCE_E2 0xFFEFFFFF
-#define S_00000D_FORCE_SE(x) (((x) & 0x1) << 21)
-#define G_00000D_FORCE_SE(x) (((x) >> 21) & 0x1)
-#define C_00000D_FORCE_SE 0xFFDFFFFF
+#define S_00000D_FORCE_VAP(x) (((x) & 0x1) << 21)
+#define G_00000D_FORCE_VAP(x) (((x) >> 21) & 0x1)
+#define C_00000D_FORCE_VAP 0xFFDFFFFF
#define S_00000D_FORCE_IDCT(x) (((x) & 0x1) << 22)
#define G_00000D_FORCE_IDCT(x) (((x) >> 22) & 0x1)
#define C_00000D_FORCE_IDCT 0xFFBFFFFF
#define S_00000D_FORCE_RE(x) (((x) & 0x1) << 24)
#define G_00000D_FORCE_RE(x) (((x) >> 24) & 0x1)
#define C_00000D_FORCE_RE 0xFEFFFFFF
-#define S_00000D_FORCE_PB(x) (((x) & 0x1) << 25)
-#define G_00000D_FORCE_PB(x) (((x) >> 25) & 0x1)
-#define C_00000D_FORCE_PB 0xFDFFFFFF
+#define S_00000D_FORCE_SR(x) (((x) & 0x1) << 25)
+#define G_00000D_FORCE_SR(x) (((x) >> 25) & 0x1)
+#define C_00000D_FORCE_SR 0xFDFFFFFF
#define S_00000D_FORCE_PX(x) (((x) & 0x1) << 26)
#define G_00000D_FORCE_PX(x) (((x) >> 26) & 0x1)
#define C_00000D_FORCE_PX 0xFBFFFFFF
#define S_00000D_FORCE_TX(x) (((x) & 0x1) << 27)
#define G_00000D_FORCE_TX(x) (((x) >> 27) & 0x1)
#define C_00000D_FORCE_TX 0xF7FFFFFF
-#define S_00000D_FORCE_RB(x) (((x) & 0x1) << 28)
-#define G_00000D_FORCE_RB(x) (((x) >> 28) & 0x1)
-#define C_00000D_FORCE_RB 0xEFFFFFFF
+#define S_00000D_FORCE_US(x) (((x) & 0x1) << 28)
+#define G_00000D_FORCE_US(x) (((x) >> 28) & 0x1)
+#define C_00000D_FORCE_US 0xEFFFFFFF
#define S_00000D_FORCE_TV_SCLK(x) (((x) & 0x1) << 29)
#define G_00000D_FORCE_TV_SCLK(x) (((x) >> 29) & 0x1)
#define C_00000D_FORCE_TV_SCLK 0xDFFFFFFF
-#define S_00000D_FORCE_SUBPIC(x) (((x) & 0x1) << 30)
-#define G_00000D_FORCE_SUBPIC(x) (((x) >> 30) & 0x1)
-#define C_00000D_FORCE_SUBPIC 0xBFFFFFFF
+#define S_00000D_FORCE_SU(x) (((x) & 0x1) << 30)
+#define G_00000D_FORCE_SU(x) (((x) >> 30) & 0x1)
+#define C_00000D_FORCE_SU 0xBFFFFFFF
#define S_00000D_FORCE_OV0(x) (((x) & 0x1) << 31)
#define G_00000D_FORCE_OV0(x) (((x) >> 31) & 0x1)
#define C_00000D_FORCE_OV0 0x7FFFFFFF
#define AVIVO_D1MODE_VBLANK_STATUS 0x6534
# define AVIVO_VBLANK_ACK (1 << 4)
#define AVIVO_D1MODE_VLINE_START_END 0x6538
+#define AVIVO_D1MODE_VLINE_STATUS 0x653c
+# define AVIVO_D1MODE_VLINE_STAT (1 << 12)
#define AVIVO_DxMODE_INT_MASK 0x6540
# define AVIVO_D1MODE_INT_MASK (1 << 0)
# define AVIVO_D2MODE_INT_MASK (1 << 8)
#define AVIVO_D2MODE_VBLANK_STATUS 0x6d34
#define AVIVO_D2MODE_VLINE_START_END 0x6d38
+#define AVIVO_D2MODE_VLINE_STATUS 0x6d3c
#define AVIVO_D2MODE_VIEWPORT_START 0x6d80
#define AVIVO_D2MODE_VIEWPORT_SIZE 0x6d84
#define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT 0x6d88
* Jerome Glisse
*/
#include "drmP.h"
-#include "radeon_reg.h"
#include "radeon.h"
+#include "atom.h"
+#include "r520d.h"
-/* r520,rv530,rv560,rv570,r580 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
-int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
+/* This files gather functions specifics to: r520,rv530,rv560,rv570,r580 */
-/* This files gather functions specifics to:
- * r520,rv530,rv560,rv570,r580
- *
- * Some of these functions might be used by newer ASICs.
- */
-void r520_gpu_init(struct radeon_device *rdev);
-int r520_mc_wait_for_idle(struct radeon_device *rdev);
-
-
-/*
- * MC
- */
-int r520_mc_init(struct radeon_device *rdev)
-{
- uint32_t tmp;
- int r;
-
- if (r100_debugfs_rbbm_init(rdev)) {
- DRM_ERROR("Failed to register debugfs file for RBBM !\n");
- }
- if (rv515_debugfs_pipes_info_init(rdev)) {
- DRM_ERROR("Failed to register debugfs file for pipes !\n");
- }
- if (rv515_debugfs_ga_info_init(rdev)) {
- DRM_ERROR("Failed to register debugfs file for pipes !\n");
- }
-
- r520_gpu_init(rdev);
- rv370_pcie_gart_disable(rdev);
-
- /* Setup GPU memory space */
- rdev->mc.vram_location = 0xFFFFFFFFUL;
- rdev->mc.gtt_location = 0xFFFFFFFFUL;
- if (rdev->flags & RADEON_IS_AGP) {
- r = radeon_agp_init(rdev);
- if (r) {
- printk(KERN_WARNING "[drm] Disabling AGP\n");
- rdev->flags &= ~RADEON_IS_AGP;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
- } else {
- rdev->mc.gtt_location = rdev->mc.agp_base;
- }
- }
- r = radeon_mc_setup(rdev);
- if (r) {
- return r;
- }
-
- /* Program GPU memory space */
- rs600_mc_disable_clients(rdev);
- if (r520_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
- }
- /* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
- tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
- tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
- tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32_MC(R520_MC_FB_LOCATION, tmp);
- WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
- WREG32(0x310, rdev->mc.vram_location);
- if (rdev->flags & RADEON_IS_AGP) {
- tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
- tmp = REG_SET(R520_MC_AGP_TOP, tmp >> 16);
- tmp |= REG_SET(R520_MC_AGP_START, rdev->mc.gtt_location >> 16);
- WREG32_MC(R520_MC_AGP_LOCATION, tmp);
- WREG32_MC(R520_MC_AGP_BASE, rdev->mc.agp_base);
- WREG32_MC(R520_MC_AGP_BASE_2, 0);
- } else {
- WREG32_MC(R520_MC_AGP_LOCATION, 0x0FFFFFFF);
- WREG32_MC(R520_MC_AGP_BASE, 0);
- WREG32_MC(R520_MC_AGP_BASE_2, 0);
- }
- return 0;
-}
-
-void r520_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
-void r520_errata(struct radeon_device *rdev)
-{
- rdev->pll_errata = 0;
-}
-
-int r520_mc_wait_for_idle(struct radeon_device *rdev)
+static int r520_mc_wait_for_idle(struct radeon_device *rdev)
{
unsigned i;
uint32_t tmp;
return -1;
}
-void r520_gpu_init(struct radeon_device *rdev)
+static void r520_gpu_init(struct radeon_device *rdev)
{
unsigned pipe_select_current, gb_pipe_select, tmp;
r100_hdp_reset(rdev);
- rs600_disable_vga(rdev);
+ rv515_vga_render_disable(rdev);
/*
* DST_PIPE_CONFIG 0x170C
* GB_TILE_CONFIG 0x4018
}
}
-
-/*
- * VRAM info
- */
static void r520_vram_get_type(struct radeon_device *rdev)
{
uint32_t tmp;
rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
}
-void r520_bandwidth_update(struct radeon_device *rdev)
+void r520_mc_program(struct radeon_device *rdev)
+{
+ struct rv515_mc_save save;
+
+ /* Stops all mc clients */
+ rv515_mc_stop(rdev, &save);
+
+ /* Wait for mc idle */
+ if (r520_mc_wait_for_idle(rdev))
+ dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+ /* Write VRAM size in case we are limiting it */
+ WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ /* Program MC, should be a 32bits limited address space */
+ WREG32_MC(R_000004_MC_FB_LOCATION,
+ S_000004_MC_FB_START(rdev->mc.vram_start >> 16) |
+ S_000004_MC_FB_TOP(rdev->mc.vram_end >> 16));
+ WREG32(R_000134_HDP_FB_LOCATION,
+ S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+ if (rdev->flags & RADEON_IS_AGP) {
+ WREG32_MC(R_000005_MC_AGP_LOCATION,
+ S_000005_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+ S_000005_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+ WREG32_MC(R_000006_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+ WREG32_MC(R_000007_AGP_BASE_2,
+ S_000007_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base)));
+ } else {
+ WREG32_MC(R_000005_MC_AGP_LOCATION, 0xFFFFFFFF);
+ WREG32_MC(R_000006_AGP_BASE, 0);
+ WREG32_MC(R_000007_AGP_BASE_2, 0);
+ }
+
+ rv515_mc_resume(rdev, &save);
+}
+
+static int r520_startup(struct radeon_device *rdev)
+{
+ int r;
+
+ r520_mc_program(rdev);
+ /* Resume clock */
+ rv515_clock_startup(rdev);
+ /* Initialize GPU configuration (# pipes, ...) */
+ r520_gpu_init(rdev);
+ /* Initialize GART (initialize after TTM so we can allocate
+ * memory through TTM but finalize after TTM) */
+ if (rdev->flags & RADEON_IS_PCIE) {
+ r = rv370_pcie_gart_enable(rdev);
+ if (r)
+ return r;
+ }
+ /* Enable IRQ */
+ rdev->irq.sw_int = true;
+ rs600_irq_set(rdev);
+ /* 1M ring buffer */
+ r = r100_cp_init(rdev, 1024 * 1024);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+ return r;
+ }
+ r = r100_wb_init(rdev);
+ if (r)
+ dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+ r = r100_ib_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+ return r;
+ }
+ return 0;
+}
+
+int r520_resume(struct radeon_device *rdev)
{
- rv515_bandwidth_avivo_update(rdev);
+ /* Make sur GART are not working */
+ if (rdev->flags & RADEON_IS_PCIE)
+ rv370_pcie_gart_disable(rdev);
+ /* Resume clock before doing reset */
+ rv515_clock_startup(rdev);
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* post */
+ atom_asic_init(rdev->mode_info.atom_context);
+ /* Resume clock after posting */
+ rv515_clock_startup(rdev);
+ return r520_startup(rdev);
+}
+
+int r520_init(struct radeon_device *rdev)
+{
+ int r;
+
+ /* Initialize scratch registers */
+ radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
+ /* TODO: disable VGA need to use VGA request */
+ /* BIOS*/
+ if (!radeon_get_bios(rdev)) {
+ if (ASIC_IS_AVIVO(rdev))
+ return -EINVAL;
+ }
+ if (rdev->is_atom_bios) {
+ r = radeon_atombios_init(rdev);
+ if (r)
+ return r;
+ } else {
+ dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+ return -EINVAL;
+ }
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev,
+ "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* check if cards are posted or not */
+ if (!radeon_card_posted(rdev) && rdev->bios) {
+ DRM_INFO("GPU not posted. posting now...\n");
+ atom_asic_init(rdev->mode_info.atom_context);
+ }
+ /* Initialize clocks */
+ radeon_get_clock_info(rdev->ddev);
+ /* Get vram informations */
+ r520_vram_info(rdev);
+ /* Initialize memory controller (also test AGP) */
+ r = r420_mc_init(rdev);
+ if (r)
+ return r;
+ rv515_debugfs(rdev);
+ /* Fence driver */
+ r = radeon_fence_driver_init(rdev);
+ if (r)
+ return r;
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ /* Memory manager */
+ r = radeon_object_init(rdev);
+ if (r)
+ return r;
+ r = rv370_pcie_gart_init(rdev);
+ if (r)
+ return r;
+ rv515_set_safe_registers(rdev);
+ rdev->accel_working = true;
+ r = r520_startup(rdev);
+ if (r) {
+ /* Somethings want wront with the accel init stop accel */
+ dev_err(rdev->dev, "Disabling GPU acceleration\n");
+ rv515_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ rv370_pcie_gart_fini(rdev);
+ radeon_agp_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ rdev->accel_working = false;
+ }
+ return 0;
}
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __R520D_H__
+#define __R520D_H__
+
+/* Registers */
+#define R_0000F8_CONFIG_MEMSIZE 0x0000F8
+#define S_0000F8_CONFIG_MEMSIZE(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0000F8_CONFIG_MEMSIZE(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0000F8_CONFIG_MEMSIZE 0x00000000
+#define R_000134_HDP_FB_LOCATION 0x000134
+#define S_000134_HDP_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000134_HDP_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000134_HDP_FB_START 0xFFFF0000
+#define R_0007C0_CP_STAT 0x0007C0
+#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0)
+#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1)
+#define C_0007C0_MRU_BUSY 0xFFFFFFFE
+#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1)
+#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1)
+#define C_0007C0_MWU_BUSY 0xFFFFFFFD
+#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2)
+#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1)
+#define C_0007C0_RSIU_BUSY 0xFFFFFFFB
+#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3)
+#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1)
+#define C_0007C0_RCIU_BUSY 0xFFFFFFF7
+#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9)
+#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1)
+#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF
+#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10)
+#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1)
+#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF
+#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11)
+#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1)
+#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF
+#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12)
+#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1)
+#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF
+#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13)
+#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1)
+#define C_0007C0_CSI_BUSY 0xFFFFDFFF
+#define S_0007C0_CSF_INDIRECT2_BUSY(x) (((x) & 0x1) << 14)
+#define G_0007C0_CSF_INDIRECT2_BUSY(x) (((x) >> 14) & 0x1)
+#define C_0007C0_CSF_INDIRECT2_BUSY 0xFFFFBFFF
+#define S_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) & 0x1) << 15)
+#define G_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) >> 15) & 0x1)
+#define C_0007C0_CSQ_INDIRECT2_BUSY 0xFFFF7FFF
+#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28)
+#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1)
+#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF
+#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29)
+#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1)
+#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF
+#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30)
+#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1)
+#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF
+#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31)
+#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1)
+#define C_0007C0_CP_BUSY 0x7FFFFFFF
+#define R_000E40_RBBM_STATUS 0x000E40
+#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0)
+#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F)
+#define C_000E40_CMDFIFO_AVAIL 0xFFFFFF80
+#define S_000E40_HIRQ_ON_RBB(x) (((x) & 0x1) << 8)
+#define G_000E40_HIRQ_ON_RBB(x) (((x) >> 8) & 0x1)
+#define C_000E40_HIRQ_ON_RBB 0xFFFFFEFF
+#define S_000E40_CPRQ_ON_RBB(x) (((x) & 0x1) << 9)
+#define G_000E40_CPRQ_ON_RBB(x) (((x) >> 9) & 0x1)
+#define C_000E40_CPRQ_ON_RBB 0xFFFFFDFF
+#define S_000E40_CFRQ_ON_RBB(x) (((x) & 0x1) << 10)
+#define G_000E40_CFRQ_ON_RBB(x) (((x) >> 10) & 0x1)
+#define C_000E40_CFRQ_ON_RBB 0xFFFFFBFF
+#define S_000E40_HIRQ_IN_RTBUF(x) (((x) & 0x1) << 11)
+#define G_000E40_HIRQ_IN_RTBUF(x) (((x) >> 11) & 0x1)
+#define C_000E40_HIRQ_IN_RTBUF 0xFFFFF7FF
+#define S_000E40_CPRQ_IN_RTBUF(x) (((x) & 0x1) << 12)
+#define G_000E40_CPRQ_IN_RTBUF(x) (((x) >> 12) & 0x1)
+#define C_000E40_CPRQ_IN_RTBUF 0xFFFFEFFF
+#define S_000E40_CFRQ_IN_RTBUF(x) (((x) & 0x1) << 13)
+#define G_000E40_CFRQ_IN_RTBUF(x) (((x) >> 13) & 0x1)
+#define C_000E40_CFRQ_IN_RTBUF 0xFFFFDFFF
+#define S_000E40_CF_PIPE_BUSY(x) (((x) & 0x1) << 14)
+#define G_000E40_CF_PIPE_BUSY(x) (((x) >> 14) & 0x1)
+#define C_000E40_CF_PIPE_BUSY 0xFFFFBFFF
+#define S_000E40_ENG_EV_BUSY(x) (((x) & 0x1) << 15)
+#define G_000E40_ENG_EV_BUSY(x) (((x) >> 15) & 0x1)
+#define C_000E40_ENG_EV_BUSY 0xFFFF7FFF
+#define S_000E40_CP_CMDSTRM_BUSY(x) (((x) & 0x1) << 16)
+#define G_000E40_CP_CMDSTRM_BUSY(x) (((x) >> 16) & 0x1)
+#define C_000E40_CP_CMDSTRM_BUSY 0xFFFEFFFF
+#define S_000E40_E2_BUSY(x) (((x) & 0x1) << 17)
+#define G_000E40_E2_BUSY(x) (((x) >> 17) & 0x1)
+#define C_000E40_E2_BUSY 0xFFFDFFFF
+#define S_000E40_RB2D_BUSY(x) (((x) & 0x1) << 18)
+#define G_000E40_RB2D_BUSY(x) (((x) >> 18) & 0x1)
+#define C_000E40_RB2D_BUSY 0xFFFBFFFF
+#define S_000E40_RB3D_BUSY(x) (((x) & 0x1) << 19)
+#define G_000E40_RB3D_BUSY(x) (((x) >> 19) & 0x1)
+#define C_000E40_RB3D_BUSY 0xFFF7FFFF
+#define S_000E40_VAP_BUSY(x) (((x) & 0x1) << 20)
+#define G_000E40_VAP_BUSY(x) (((x) >> 20) & 0x1)
+#define C_000E40_VAP_BUSY 0xFFEFFFFF
+#define S_000E40_RE_BUSY(x) (((x) & 0x1) << 21)
+#define G_000E40_RE_BUSY(x) (((x) >> 21) & 0x1)
+#define C_000E40_RE_BUSY 0xFFDFFFFF
+#define S_000E40_TAM_BUSY(x) (((x) & 0x1) << 22)
+#define G_000E40_TAM_BUSY(x) (((x) >> 22) & 0x1)
+#define C_000E40_TAM_BUSY 0xFFBFFFFF
+#define S_000E40_TDM_BUSY(x) (((x) & 0x1) << 23)
+#define G_000E40_TDM_BUSY(x) (((x) >> 23) & 0x1)
+#define C_000E40_TDM_BUSY 0xFF7FFFFF
+#define S_000E40_PB_BUSY(x) (((x) & 0x1) << 24)
+#define G_000E40_PB_BUSY(x) (((x) >> 24) & 0x1)
+#define C_000E40_PB_BUSY 0xFEFFFFFF
+#define S_000E40_TIM_BUSY(x) (((x) & 0x1) << 25)
+#define G_000E40_TIM_BUSY(x) (((x) >> 25) & 0x1)
+#define C_000E40_TIM_BUSY 0xFDFFFFFF
+#define S_000E40_GA_BUSY(x) (((x) & 0x1) << 26)
+#define G_000E40_GA_BUSY(x) (((x) >> 26) & 0x1)
+#define C_000E40_GA_BUSY 0xFBFFFFFF
+#define S_000E40_CBA2D_BUSY(x) (((x) & 0x1) << 27)
+#define G_000E40_CBA2D_BUSY(x) (((x) >> 27) & 0x1)
+#define C_000E40_CBA2D_BUSY 0xF7FFFFFF
+#define S_000E40_RBBM_HIBUSY(x) (((x) & 0x1) << 28)
+#define G_000E40_RBBM_HIBUSY(x) (((x) >> 28) & 0x1)
+#define C_000E40_RBBM_HIBUSY 0xEFFFFFFF
+#define S_000E40_SKID_CFBUSY(x) (((x) & 0x1) << 29)
+#define G_000E40_SKID_CFBUSY(x) (((x) >> 29) & 0x1)
+#define C_000E40_SKID_CFBUSY 0xDFFFFFFF
+#define S_000E40_VAP_VF_BUSY(x) (((x) & 0x1) << 30)
+#define G_000E40_VAP_VF_BUSY(x) (((x) >> 30) & 0x1)
+#define C_000E40_VAP_VF_BUSY 0xBFFFFFFF
+#define S_000E40_GUI_ACTIVE(x) (((x) & 0x1) << 31)
+#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1)
+#define C_000E40_GUI_ACTIVE 0x7FFFFFFF
+
+
+#define R_000004_MC_FB_LOCATION 0x000004
+#define S_000004_MC_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000004_MC_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000004_MC_FB_START 0xFFFF0000
+#define S_000004_MC_FB_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000004_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000004_MC_FB_TOP 0x0000FFFF
+#define R_000005_MC_AGP_LOCATION 0x000005
+#define S_000005_MC_AGP_START(x) (((x) & 0xFFFF) << 0)
+#define G_000005_MC_AGP_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000005_MC_AGP_START 0xFFFF0000
+#define S_000005_MC_AGP_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000005_MC_AGP_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000005_MC_AGP_TOP 0x0000FFFF
+#define R_000006_AGP_BASE 0x000006
+#define S_000006_AGP_BASE_ADDR(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_000006_AGP_BASE_ADDR(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_000006_AGP_BASE_ADDR 0x00000000
+#define R_000007_AGP_BASE_2 0x000007
+#define S_000007_AGP_BASE_ADDR_2(x) (((x) & 0xF) << 0)
+#define G_000007_AGP_BASE_ADDR_2(x) (((x) >> 0) & 0xF)
+#define C_000007_AGP_BASE_ADDR_2 0xFFFFFFF0
+
+#endif
#include "radeon.h"
#include "radeon_mode.h"
#include "r600d.h"
-#include "avivod.h"
#include "atom.h"
+#include "avivod.h"
#define PFP_UCODE_SIZE 576
#define PM4_UCODE_SIZE 1792
int r600_debugfs_mc_info_init(struct radeon_device *rdev);
-/* This files gather functions specifics to:
- * r600,rv610,rv630,rv620,rv635,rv670
- *
- * Some of these functions might be used by newer ASICs.
- */
+/* r600,rv610,rv630,rv620,rv635,rv670 */
int r600_mc_wait_for_idle(struct radeon_device *rdev);
void r600_gpu_init(struct radeon_device *rdev);
void r600_fini(struct radeon_device *rdev);
-
/*
* R600 PCIE GART
*/
WREG32(MC_VM_L1_TLB_MCB_RD_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
WREG32(MC_VM_L1_TLB_MCB_WR_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12);
- WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end - 1) >> 12);
+ WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12);
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12);
WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) |
RANGE_PROTECTION_FAULT_ENABLE_DEFAULT);
radeon_gart_fini(rdev);
}
+void r600_agp_enable(struct radeon_device *rdev)
+{
+ u32 tmp;
+ int i;
+
+ /* Setup L2 cache */
+ WREG32(VM_L2_CNTL, ENABLE_L2_CACHE | ENABLE_L2_FRAGMENT_PROCESSING |
+ ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE |
+ EFFECTIVE_L2_QUEUE_SIZE(7));
+ WREG32(VM_L2_CNTL2, 0);
+ WREG32(VM_L2_CNTL3, BANK_SELECT_0(0) | BANK_SELECT_1(1));
+ /* Setup TLB control */
+ tmp = ENABLE_L1_TLB | ENABLE_L1_FRAGMENT_PROCESSING |
+ SYSTEM_ACCESS_MODE_NOT_IN_SYS |
+ EFFECTIVE_L1_TLB_SIZE(5) | EFFECTIVE_L1_QUEUE_SIZE(5) |
+ ENABLE_WAIT_L2_QUERY;
+ WREG32(MC_VM_L1_TLB_MCB_RD_SYS_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCB_WR_SYS_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCB_RD_HDP_CNTL, tmp | ENABLE_L1_STRICT_ORDERING);
+ WREG32(MC_VM_L1_TLB_MCB_WR_HDP_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCD_RD_A_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCD_WR_A_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCD_RD_B_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCD_WR_B_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCB_RD_GFX_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCB_WR_GFX_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCB_RD_PDMA_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCB_WR_PDMA_CNTL, tmp);
+ WREG32(MC_VM_L1_TLB_MCB_RD_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
+ WREG32(MC_VM_L1_TLB_MCB_WR_SEM_CNTL, tmp | ENABLE_SEMAPHORE_MODE);
+ for (i = 0; i < 7; i++)
+ WREG32(VM_CONTEXT0_CNTL + (i * 4), 0);
+}
+
int r600_mc_wait_for_idle(struct radeon_device *rdev)
{
unsigned i;
return -1;
}
-static void r600_mc_resume(struct radeon_device *rdev)
+static void r600_mc_program(struct radeon_device *rdev)
{
- u32 d1vga_control, d2vga_control;
- u32 vga_render_control, vga_hdp_control;
- u32 d1crtc_control, d2crtc_control;
- u32 new_d1grph_primary, new_d1grph_secondary;
- u32 new_d2grph_primary, new_d2grph_secondary;
- u64 old_vram_start;
+ struct rv515_mc_save save;
u32 tmp;
int i, j;
}
WREG32(HDP_REG_COHERENCY_FLUSH_CNTL, 0);
- d1vga_control = RREG32(D1VGA_CONTROL);
- d2vga_control = RREG32(D2VGA_CONTROL);
- vga_render_control = RREG32(VGA_RENDER_CONTROL);
- vga_hdp_control = RREG32(VGA_HDP_CONTROL);
- d1crtc_control = RREG32(D1CRTC_CONTROL);
- d2crtc_control = RREG32(D2CRTC_CONTROL);
- old_vram_start = (u64)(RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
- new_d1grph_primary = RREG32(D1GRPH_PRIMARY_SURFACE_ADDRESS);
- new_d1grph_secondary = RREG32(D1GRPH_SECONDARY_SURFACE_ADDRESS);
- new_d1grph_primary += rdev->mc.vram_start - old_vram_start;
- new_d1grph_secondary += rdev->mc.vram_start - old_vram_start;
- new_d2grph_primary = RREG32(D2GRPH_PRIMARY_SURFACE_ADDRESS);
- new_d2grph_secondary = RREG32(D2GRPH_SECONDARY_SURFACE_ADDRESS);
- new_d2grph_primary += rdev->mc.vram_start - old_vram_start;
- new_d2grph_secondary += rdev->mc.vram_start - old_vram_start;
-
- /* Stop all video */
- WREG32(D1VGA_CONTROL, 0);
- WREG32(D2VGA_CONTROL, 0);
- WREG32(VGA_RENDER_CONTROL, 0);
- WREG32(D1CRTC_UPDATE_LOCK, 1);
- WREG32(D2CRTC_UPDATE_LOCK, 1);
- WREG32(D1CRTC_CONTROL, 0);
- WREG32(D2CRTC_CONTROL, 0);
- WREG32(D1CRTC_UPDATE_LOCK, 0);
- WREG32(D2CRTC_UPDATE_LOCK, 0);
-
- mdelay(1);
+ rv515_mc_stop(rdev, &save);
if (r600_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "[drm] MC not idle !\n");
+ dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
}
-
- /* Lockout access through VGA aperture*/
+ /* Lockout access through VGA aperture (doesn't exist before R600) */
WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE);
-
/* Update configuration */
- WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12);
- WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, (rdev->mc.vram_end - 1) >> 12);
+ if (rdev->flags & RADEON_IS_AGP) {
+ if (rdev->mc.vram_start < rdev->mc.gtt_start) {
+ /* VRAM before AGP */
+ WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+ rdev->mc.vram_start >> 12);
+ WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ rdev->mc.gtt_end >> 12);
+ } else {
+ /* VRAM after AGP */
+ WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+ rdev->mc.gtt_start >> 12);
+ WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ rdev->mc.vram_end >> 12);
+ }
+ } else {
+ WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12);
+ WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, rdev->mc.vram_end >> 12);
+ }
WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
- tmp = (((rdev->mc.vram_end - 1) >> 24) & 0xFFFF) << 16;
+ tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16;
tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF);
WREG32(MC_VM_FB_LOCATION, tmp);
WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
WREG32(HDP_NONSURFACE_INFO, (2 << 7));
- WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
+ WREG32(HDP_NONSURFACE_SIZE, rdev->mc.mc_vram_size | 0x3FF);
if (rdev->flags & RADEON_IS_AGP) {
- WREG32(MC_VM_AGP_TOP, (rdev->mc.gtt_end - 1) >> 16);
- WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
+ WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 22);
+ WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 22);
WREG32(MC_VM_AGP_BASE, rdev->mc.agp_base >> 22);
} else {
WREG32(MC_VM_AGP_BASE, 0);
WREG32(MC_VM_AGP_TOP, 0x0FFFFFFF);
WREG32(MC_VM_AGP_BOT, 0x0FFFFFFF);
}
- WREG32(D1GRPH_PRIMARY_SURFACE_ADDRESS, new_d1grph_primary);
- WREG32(D1GRPH_SECONDARY_SURFACE_ADDRESS, new_d1grph_secondary);
- WREG32(D2GRPH_PRIMARY_SURFACE_ADDRESS, new_d2grph_primary);
- WREG32(D2GRPH_SECONDARY_SURFACE_ADDRESS, new_d2grph_secondary);
- WREG32(VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start);
-
- /* Unlock host access */
- WREG32(VGA_HDP_CONTROL, vga_hdp_control);
-
- mdelay(1);
if (r600_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "[drm] MC not idle !\n");
+ dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
}
-
- /* Restore video state */
- WREG32(D1CRTC_UPDATE_LOCK, 1);
- WREG32(D2CRTC_UPDATE_LOCK, 1);
- WREG32(D1CRTC_CONTROL, d1crtc_control);
- WREG32(D2CRTC_CONTROL, d2crtc_control);
- WREG32(D1CRTC_UPDATE_LOCK, 0);
- WREG32(D2CRTC_UPDATE_LOCK, 0);
- WREG32(D1VGA_CONTROL, d1vga_control);
- WREG32(D2VGA_CONTROL, d2vga_control);
- WREG32(VGA_RENDER_CONTROL, vga_render_control);
-
+ rv515_mc_resume(rdev, &save);
/* we need to own VRAM, so turn off the VGA renderer here
* to stop it overwriting our objects */
- radeon_avivo_vga_render_disable(rdev);
+ rv515_vga_render_disable(rdev);
}
int r600_mc_init(struct radeon_device *rdev)
/* Setup GPU memory space */
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
+
+ if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+ rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+ if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+ rdev->mc.real_vram_size = rdev->mc.aper_size;
+
if (rdev->flags & RADEON_IS_AGP) {
r = radeon_agp_init(rdev);
if (r)
}
}
rdev->mc.vram_start = rdev->mc.vram_location;
- rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size;
+ rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
rdev->mc.gtt_start = rdev->mc.gtt_location;
- rdev->mc.gtt_end = rdev->mc.gtt_location + rdev->mc.gtt_size;
+ rdev->mc.gtt_end = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
/* FIXME: we should enforce default clock in case GPU is not in
* default setup
*/
*/
int r600_gpu_soft_reset(struct radeon_device *rdev)
{
+ struct rv515_mc_save save;
u32 grbm_busy_mask = S_008010_VC_BUSY(1) | S_008010_VGT_BUSY_NO_DMA(1) |
S_008010_VGT_BUSY(1) | S_008010_TA03_BUSY(1) |
S_008010_TC_BUSY(1) | S_008010_SX_BUSY(1) |
S_008014_CB0_BUSY(1) | S_008014_CB1_BUSY(1) |
S_008014_CB2_BUSY(1) | S_008014_CB3_BUSY(1);
u32 srbm_reset = 0;
+ u32 tmp;
+ dev_info(rdev->dev, "GPU softreset \n");
+ dev_info(rdev->dev, " R_008010_GRBM_STATUS=0x%08X\n",
+ RREG32(R_008010_GRBM_STATUS));
+ dev_info(rdev->dev, " R_008014_GRBM_STATUS2=0x%08X\n",
+ RREG32(R_008014_GRBM_STATUS2));
+ dev_info(rdev->dev, " R_000E50_SRBM_STATUS=0x%08X\n",
+ RREG32(R_000E50_SRBM_STATUS));
+ rv515_mc_stop(rdev, &save);
+ if (r600_mc_wait_for_idle(rdev)) {
+ dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
+ }
/* Disable CP parsing/prefetching */
WREG32(R_0086D8_CP_ME_CNTL, S_0086D8_CP_ME_HALT(0xff));
/* Check if any of the rendering block is busy and reset it */
if ((RREG32(R_008010_GRBM_STATUS) & grbm_busy_mask) ||
(RREG32(R_008014_GRBM_STATUS2) & grbm2_busy_mask)) {
- WREG32(R_008020_GRBM_SOFT_RESET, S_008020_SOFT_RESET_CR(1) |
+ tmp = S_008020_SOFT_RESET_CR(1) |
S_008020_SOFT_RESET_DB(1) |
S_008020_SOFT_RESET_CB(1) |
S_008020_SOFT_RESET_PA(1) |
S_008020_SOFT_RESET_TC(1) |
S_008020_SOFT_RESET_TA(1) |
S_008020_SOFT_RESET_VC(1) |
- S_008020_SOFT_RESET_VGT(1));
+ S_008020_SOFT_RESET_VGT(1);
+ dev_info(rdev->dev, " R_008020_GRBM_SOFT_RESET=0x%08X\n", tmp);
+ WREG32(R_008020_GRBM_SOFT_RESET, tmp);
(void)RREG32(R_008020_GRBM_SOFT_RESET);
udelay(50);
WREG32(R_008020_GRBM_SOFT_RESET, 0);
(void)RREG32(R_008020_GRBM_SOFT_RESET);
}
/* Reset CP (we always reset CP) */
- WREG32(R_008020_GRBM_SOFT_RESET, S_008020_SOFT_RESET_CP(1));
+ tmp = S_008020_SOFT_RESET_CP(1);
+ dev_info(rdev->dev, "R_008020_GRBM_SOFT_RESET=0x%08X\n", tmp);
+ WREG32(R_008020_GRBM_SOFT_RESET, tmp);
(void)RREG32(R_008020_GRBM_SOFT_RESET);
udelay(50);
WREG32(R_008020_GRBM_SOFT_RESET, 0);
srbm_reset |= S_000E60_SOFT_RESET_RLC(1);
if (G_000E50_SEM_BUSY(RREG32(R_000E50_SRBM_STATUS)))
srbm_reset |= S_000E60_SOFT_RESET_SEM(1);
+ if (G_000E50_BIF_BUSY(RREG32(R_000E50_SRBM_STATUS)))
+ srbm_reset |= S_000E60_SOFT_RESET_BIF(1);
+ dev_info(rdev->dev, " R_000E60_SRBM_SOFT_RESET=0x%08X\n", srbm_reset);
+ WREG32(R_000E60_SRBM_SOFT_RESET, srbm_reset);
+ (void)RREG32(R_000E60_SRBM_SOFT_RESET);
+ udelay(50);
+ WREG32(R_000E60_SRBM_SOFT_RESET, 0);
+ (void)RREG32(R_000E60_SRBM_SOFT_RESET);
WREG32(R_000E60_SRBM_SOFT_RESET, srbm_reset);
(void)RREG32(R_000E60_SRBM_SOFT_RESET);
udelay(50);
(void)RREG32(R_000E60_SRBM_SOFT_RESET);
/* Wait a little for things to settle down */
udelay(50);
+ dev_info(rdev->dev, " R_008010_GRBM_STATUS=0x%08X\n",
+ RREG32(R_008010_GRBM_STATUS));
+ dev_info(rdev->dev, " R_008014_GRBM_STATUS2=0x%08X\n",
+ RREG32(R_008014_GRBM_STATUS2));
+ dev_info(rdev->dev, " R_000E50_SRBM_STATUS=0x%08X\n",
+ RREG32(R_000E50_SRBM_STATUS));
+ /* After reset we need to reinit the asic as GPU often endup in an
+ * incoherent state.
+ */
+ atom_asic_init(rdev->mode_info.atom_context);
+ rv515_mc_resume(rdev, &save);
return 0;
}
return r;
}
-/*
- * Writeback
- */
-int r600_wb_init(struct radeon_device *rdev)
+void r600_wb_disable(struct radeon_device *rdev)
+{
+ WREG32(SCRATCH_UMSK, 0);
+ if (rdev->wb.wb_obj) {
+ radeon_object_kunmap(rdev->wb.wb_obj);
+ radeon_object_unpin(rdev->wb.wb_obj);
+ }
+}
+
+void r600_wb_fini(struct radeon_device *rdev)
+{
+ r600_wb_disable(rdev);
+ if (rdev->wb.wb_obj) {
+ radeon_object_unref(&rdev->wb.wb_obj);
+ rdev->wb.wb = NULL;
+ rdev->wb.wb_obj = NULL;
+ }
+}
+
+int r600_wb_enable(struct radeon_device *rdev)
{
int r;
if (rdev->wb.wb_obj == NULL) {
- r = radeon_object_create(rdev, NULL, 4096,
- true,
- RADEON_GEM_DOMAIN_GTT,
- false, &rdev->wb.wb_obj);
+ r = radeon_object_create(rdev, NULL, 4096, true,
+ RADEON_GEM_DOMAIN_GTT, false, &rdev->wb.wb_obj);
if (r) {
- DRM_ERROR("radeon: failed to create WB buffer (%d).\n", r);
+ dev_warn(rdev->dev, "failed to create WB buffer (%d).\n", r);
return r;
}
- r = radeon_object_pin(rdev->wb.wb_obj,
- RADEON_GEM_DOMAIN_GTT,
- &rdev->wb.gpu_addr);
+ r = radeon_object_pin(rdev->wb.wb_obj, RADEON_GEM_DOMAIN_GTT,
+ &rdev->wb.gpu_addr);
if (r) {
- DRM_ERROR("radeon: failed to pin WB buffer (%d).\n", r);
+ dev_warn(rdev->dev, "failed to pin WB buffer (%d).\n", r);
+ r600_wb_fini(rdev);
return r;
}
r = radeon_object_kmap(rdev->wb.wb_obj, (void **)&rdev->wb.wb);
if (r) {
- DRM_ERROR("radeon: failed to map WB buffer (%d).\n", r);
+ dev_warn(rdev->dev, "failed to map WB buffer (%d).\n", r);
+ r600_wb_fini(rdev);
return r;
}
}
return 0;
}
-void r600_wb_fini(struct radeon_device *rdev)
-{
- if (rdev->wb.wb_obj) {
- radeon_object_kunmap(rdev->wb.wb_obj);
- radeon_object_unpin(rdev->wb.wb_obj);
- radeon_object_unref(&rdev->wb.wb_obj);
- rdev->wb.wb = NULL;
- rdev->wb.wb_obj = NULL;
- }
-}
-
-
-/*
- * CS
- */
void r600_fence_ring_emit(struct radeon_device *rdev,
struct radeon_fence *fence)
{
{
int r;
- r600_gpu_reset(rdev);
- r600_mc_resume(rdev);
- r = r600_pcie_gart_enable(rdev);
- if (r)
- return r;
+ r600_mc_program(rdev);
+ if (rdev->flags & RADEON_IS_AGP) {
+ r600_agp_enable(rdev);
+ } else {
+ r = r600_pcie_gart_enable(rdev);
+ if (r)
+ return r;
+ }
r600_gpu_init(rdev);
r = radeon_object_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
r = r600_cp_resume(rdev);
if (r)
return r;
- r = r600_wb_init(rdev);
- if (r)
- return r;
+ /* write back buffer are not vital so don't worry about failure */
+ r600_wb_enable(rdev);
return 0;
}
{
int r;
- if (radeon_gpu_reset(rdev)) {
- /* FIXME: what do we want to do here ? */
- }
+ /* Do not reset GPU before posting, on r600 hw unlike on r500 hw,
+ * posting will perform necessary task to bring back GPU into good
+ * shape.
+ */
/* post card */
- if (rdev->is_atom_bios) {
- atom_asic_init(rdev->mode_info.atom_context);
- } else {
- radeon_combios_asic_init(rdev->ddev);
- }
+ atom_asic_init(rdev->mode_info.atom_context);
/* Initialize clocks */
r = radeon_clocks_init(rdev);
if (r) {
return r;
}
- r = radeon_ib_test(rdev);
+ r = r600_ib_test(rdev);
if (r) {
DRM_ERROR("radeon: failled testing IB (%d).\n", r);
return r;
return r;
}
-
int r600_suspend(struct radeon_device *rdev)
{
/* FIXME: we should wait for ring to be empty */
r600_cp_stop(rdev);
rdev->cp.ready = false;
-
+ r600_wb_disable(rdev);
r600_pcie_gart_disable(rdev);
/* unpin shaders bo */
radeon_object_unpin(rdev->r600_blit.shader_obj);
{
int r;
- rdev->new_init_path = true;
r = radeon_dummy_page_init(rdev);
if (r)
return r;
return -EINVAL;
}
/* Must be an ATOMBIOS */
- if (!rdev->is_atom_bios)
+ if (!rdev->is_atom_bios) {
+ dev_err(rdev->dev, "Expecting atombios for R600 GPU\n");
return -EINVAL;
+ }
r = radeon_atombios_init(rdev);
if (r)
return r;
if (r)
return r;
r = r600_mc_init(rdev);
- if (r) {
- if (rdev->flags & RADEON_IS_AGP) {
- /* Retry with disabling AGP */
- r600_fini(rdev);
- rdev->flags &= ~RADEON_IS_AGP;
- return r600_init(rdev);
- }
+ if (r)
return r;
- }
/* Memory manager */
r = radeon_object_init(rdev);
if (r)
r = r600_startup(rdev);
if (r) {
- if (rdev->flags & RADEON_IS_AGP) {
- /* Retry with disabling AGP */
- r600_fini(rdev);
- rdev->flags &= ~RADEON_IS_AGP;
- return r600_init(rdev);
- }
+ r600_suspend(rdev);
+ r600_wb_fini(rdev);
+ radeon_ring_fini(rdev);
+ r600_pcie_gart_fini(rdev);
rdev->accel_working = false;
}
if (rdev->accel_working) {
DRM_ERROR("radeon: failled initializing IB pool (%d).\n", r);
rdev->accel_working = false;
}
- r = radeon_ib_test(rdev);
+ r = r600_ib_test(rdev);
if (r) {
DRM_ERROR("radeon: failled testing IB (%d).\n", r);
rdev->accel_working = false;
r600_blit_fini(rdev);
radeon_ring_fini(rdev);
+ r600_wb_fini(rdev);
r600_pcie_gart_fini(rdev);
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_clocks_fini(rdev);
-#if __OS_HAS_AGP
if (rdev->flags & RADEON_IS_AGP)
radeon_agp_fini(rdev);
-#endif
radeon_object_fini(rdev);
- if (rdev->is_atom_bios)
- radeon_atombios_fini(rdev);
- else
- radeon_combios_fini(rdev);
+ radeon_atombios_fini(rdev);
kfree(rdev->bios);
rdev->bios = NULL;
radeon_dummy_page_fini(rdev);
u64 vb_addr;
u32 *vb;
- vb = r600_nomm_get_vb_ptr(dev);
-
if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) {
max_bytes = 8192;
if (!dev_priv->blit_vb)
return;
set_shaders(dev);
- vb = r600_nomm_get_vb_ptr(dev);
}
+ vb = r600_nomm_get_vb_ptr(dev);
vb[0] = i2f(dst_x);
vb[1] = 0;
return;
set_shaders(dev);
- vb = r600_nomm_get_vb_ptr(dev);
}
+ vb = r600_nomm_get_vb_ptr(dev);
vb[0] = i2f(dst_x / 4);
vb[1] = 0;
/* dst */
set_render_target(dev_priv, COLOR_8_8_8_8,
- dst_x + cur_size, h,
+ (dst_x + cur_size) / 4, h,
dst_gpu_addr);
/* scissors */
u64 vb_addr;
u32 *vb;
- vb = r600_nomm_get_vb_ptr(dev);
-
if ((dev_priv->blit_vb->used + 48) > dev_priv->blit_vb->total) {
r600_nomm_put_vb(dev);
return;
set_shaders(dev);
- vb = r600_nomm_get_vb_ptr(dev);
}
+ vb = r600_nomm_get_vb_ptr(dev);
if (cpp == 4) {
cb_format = COLOR_8_8_8_8;
DRM_DEBUG("emitting copy %16llx %16llx %d %d\n", src_gpu_addr, dst_gpu_addr,
size_bytes, rdev->r600_blit.vb_used);
- vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
if ((size_bytes & 3) || (src_gpu_addr & 3) || (dst_gpu_addr & 3)) {
max_bytes = 8192;
vb = r600_nomm_get_vb_ptr(dev);
#endif
}
+ vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
vb[0] = i2f(dst_x);
vb[1] = 0;
vb = r600_nomm_get_vb_ptr(dev);
}
#endif
+ vb = (u32 *)(rdev->r600_blit.vb_ib->ptr + rdev->r600_blit.vb_used);
vb[0] = i2f(dst_x / 4);
vb[1] = 0;
/* dst 23 */
set_render_target(rdev, COLOR_8_8_8_8,
- dst_x + cur_size, h,
+ (dst_x + cur_size) / 4, h,
dst_gpu_addr);
/* scissors 12 */
#include "drmP.h"
#include "radeon.h"
#include "r600d.h"
-#include "avivod.h"
static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
struct radeon_cs_reloc **cs_reloc);
idx, ib_chunk->length_dw);
return -EINVAL;
}
- header = ib_chunk->kdata[idx];
+ header = radeon_get_ib_value(p, idx);
pkt->idx = idx;
pkt->type = CP_PACKET_GET_TYPE(header);
pkt->count = CP_PACKET_GET_COUNT(header);
static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
struct radeon_cs_reloc **cs_reloc)
{
- struct radeon_cs_chunk *ib_chunk;
struct radeon_cs_chunk *relocs_chunk;
struct radeon_cs_packet p3reloc;
unsigned idx;
return -EINVAL;
}
*cs_reloc = NULL;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
relocs_chunk = &p->chunks[p->chunk_relocs_idx];
r = r600_cs_packet_parse(p, &p3reloc, p->idx);
if (r) {
p3reloc.idx);
return -EINVAL;
}
- idx = ib_chunk->kdata[p3reloc.idx + 1];
+ idx = radeon_get_ib_value(p, p3reloc.idx + 1);
if (idx >= relocs_chunk->length_dw) {
DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
idx, relocs_chunk->length_dw);
static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
struct radeon_cs_reloc **cs_reloc)
{
- struct radeon_cs_chunk *ib_chunk;
struct radeon_cs_chunk *relocs_chunk;
struct radeon_cs_packet p3reloc;
unsigned idx;
return -EINVAL;
}
*cs_reloc = NULL;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
relocs_chunk = &p->chunks[p->chunk_relocs_idx];
r = r600_cs_packet_parse(p, &p3reloc, p->idx);
if (r) {
p3reloc.idx);
return -EINVAL;
}
- idx = ib_chunk->kdata[p3reloc.idx + 1];
+ idx = radeon_get_ib_value(p, p3reloc.idx + 1);
if (idx >= relocs_chunk->length_dw) {
DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
idx, relocs_chunk->length_dw);
return 0;
}
+/**
+ * r600_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser: parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET3 - WAIT_REG_MEM poll vline status reg
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT_REG_MEM packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+ struct drm_mode_object *obj;
+ struct drm_crtc *crtc;
+ struct radeon_crtc *radeon_crtc;
+ struct radeon_cs_packet p3reloc, wait_reg_mem;
+ int crtc_id;
+ int r;
+ uint32_t header, h_idx, reg, wait_reg_mem_info;
+ volatile uint32_t *ib;
+
+ ib = p->ib->ptr;
+
+ /* parse the WAIT_REG_MEM */
+ r = r600_cs_packet_parse(p, &wait_reg_mem, p->idx);
+ if (r)
+ return r;
+
+ /* check its a WAIT_REG_MEM */
+ if (wait_reg_mem.type != PACKET_TYPE3 ||
+ wait_reg_mem.opcode != PACKET3_WAIT_REG_MEM) {
+ DRM_ERROR("vline wait missing WAIT_REG_MEM segment\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ wait_reg_mem_info = radeon_get_ib_value(p, wait_reg_mem.idx + 1);
+ /* bit 4 is reg (0) or mem (1) */
+ if (wait_reg_mem_info & 0x10) {
+ DRM_ERROR("vline WAIT_REG_MEM waiting on MEM rather than REG\n");
+ r = -EINVAL;
+ return r;
+ }
+ /* waiting for value to be equal */
+ if ((wait_reg_mem_info & 0x7) != 0x3) {
+ DRM_ERROR("vline WAIT_REG_MEM function not equal\n");
+ r = -EINVAL;
+ return r;
+ }
+ if ((radeon_get_ib_value(p, wait_reg_mem.idx + 2) << 2) != AVIVO_D1MODE_VLINE_STATUS) {
+ DRM_ERROR("vline WAIT_REG_MEM bad reg\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ if (radeon_get_ib_value(p, wait_reg_mem.idx + 5) != AVIVO_D1MODE_VLINE_STAT) {
+ DRM_ERROR("vline WAIT_REG_MEM bad bit mask\n");
+ r = -EINVAL;
+ return r;
+ }
+
+ /* jump over the NOP */
+ r = r600_cs_packet_parse(p, &p3reloc, p->idx + wait_reg_mem.count + 2);
+ if (r)
+ return r;
+
+ h_idx = p->idx - 2;
+ p->idx += wait_reg_mem.count + 2;
+ p->idx += p3reloc.count + 2;
+
+ header = radeon_get_ib_value(p, h_idx);
+ crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
+ reg = CP_PACKET0_GET_REG(header);
+ mutex_lock(&p->rdev->ddev->mode_config.mutex);
+ obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+ if (!obj) {
+ DRM_ERROR("cannot find crtc %d\n", crtc_id);
+ r = -EINVAL;
+ goto out;
+ }
+ crtc = obj_to_crtc(obj);
+ radeon_crtc = to_radeon_crtc(crtc);
+ crtc_id = radeon_crtc->crtc_id;
+
+ if (!crtc->enabled) {
+ /* if the CRTC isn't enabled - we need to nop out the WAIT_REG_MEM */
+ ib[h_idx + 2] = PACKET2(0);
+ ib[h_idx + 3] = PACKET2(0);
+ ib[h_idx + 4] = PACKET2(0);
+ ib[h_idx + 5] = PACKET2(0);
+ ib[h_idx + 6] = PACKET2(0);
+ ib[h_idx + 7] = PACKET2(0);
+ ib[h_idx + 8] = PACKET2(0);
+ } else if (crtc_id == 1) {
+ switch (reg) {
+ case AVIVO_D1MODE_VLINE_START_END:
+ header &= ~R600_CP_PACKET0_REG_MASK;
+ header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+ break;
+ default:
+ DRM_ERROR("unknown crtc reloc\n");
+ r = -EINVAL;
+ goto out;
+ }
+ ib[h_idx] = header;
+ ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2;
+ }
+out:
+ mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+ return r;
+}
+
static int r600_packet0_check(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt,
unsigned idx, unsigned reg)
{
+ int r;
+
switch (reg) {
case AVIVO_D1MODE_VLINE_START_END:
- case AVIVO_D2MODE_VLINE_START_END:
+ r = r600_cs_packet_parse_vline(p);
+ if (r) {
+ DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+ idx, reg);
+ return r;
+ }
break;
default:
printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
static int r600_packet3_check(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt)
{
- struct radeon_cs_chunk *ib_chunk;
struct radeon_cs_reloc *reloc;
volatile u32 *ib;
unsigned idx;
unsigned i;
unsigned start_reg, end_reg, reg;
int r;
+ u32 idx_value;
ib = p->ib->ptr;
- ib_chunk = &p->chunks[p->chunk_ib_idx];
idx = pkt->idx + 1;
+ idx_value = radeon_get_ib_value(p, idx);
+
switch (pkt->opcode) {
case PACKET3_START_3D_CMDBUF:
if (p->family >= CHIP_RV770 || pkt->count) {
DRM_ERROR("bad DRAW_INDEX\n");
return -EINVAL;
}
- ib[idx+0] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
- ib[idx+1] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+ ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
break;
case PACKET3_DRAW_INDEX_AUTO:
if (pkt->count != 1) {
return -EINVAL;
}
/* bit 4 is reg (0) or mem (1) */
- if (ib_chunk->kdata[idx+0] & 0x10) {
+ if (idx_value & 0x10) {
r = r600_cs_packet_next_reloc(p, &reloc);
if (r) {
DRM_ERROR("bad WAIT_REG_MEM\n");
return -EINVAL;
}
ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
- ib[idx+2] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
}
break;
case PACKET3_SURFACE_SYNC:
return -EINVAL;
}
/* 0xffffffff/0x0 is flush all cache flag */
- if (ib_chunk->kdata[idx+1] != 0xffffffff ||
- ib_chunk->kdata[idx+2] != 0) {
+ if (radeon_get_ib_value(p, idx + 1) != 0xffffffff ||
+ radeon_get_ib_value(p, idx + 2) != 0) {
r = r600_cs_packet_next_reloc(p, &reloc);
if (r) {
DRM_ERROR("bad SURFACE_SYNC\n");
return -EINVAL;
}
ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
- ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
}
break;
case PACKET3_EVENT_WRITE_EOP:
return -EINVAL;
}
ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
- ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
break;
case PACKET3_SET_CONFIG_REG:
- start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONFIG_REG_OFFSET;
+ start_reg = (idx_value << 2) + PACKET3_SET_CONFIG_REG_OFFSET;
end_reg = 4 * pkt->count + start_reg - 4;
if ((start_reg < PACKET3_SET_CONFIG_REG_OFFSET) ||
(start_reg >= PACKET3_SET_CONFIG_REG_END) ||
}
break;
case PACKET3_SET_CONTEXT_REG:
- start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONTEXT_REG_OFFSET;
+ start_reg = (idx_value << 2) + PACKET3_SET_CONTEXT_REG_OFFSET;
end_reg = 4 * pkt->count + start_reg - 4;
if ((start_reg < PACKET3_SET_CONTEXT_REG_OFFSET) ||
(start_reg >= PACKET3_SET_CONTEXT_REG_END) ||
DRM_ERROR("bad SET_RESOURCE\n");
return -EINVAL;
}
- start_reg = (ib[idx+0] << 2) + PACKET3_SET_RESOURCE_OFFSET;
+ start_reg = (idx_value << 2) + PACKET3_SET_RESOURCE_OFFSET;
end_reg = 4 * pkt->count + start_reg - 4;
if ((start_reg < PACKET3_SET_RESOURCE_OFFSET) ||
(start_reg >= PACKET3_SET_RESOURCE_END) ||
return -EINVAL;
}
for (i = 0; i < (pkt->count / 7); i++) {
- switch (G__SQ_VTX_CONSTANT_TYPE(ib[idx+(i*7)+6+1])) {
+ switch (G__SQ_VTX_CONSTANT_TYPE(radeon_get_ib_value(p, idx+(i*7)+6+1))) {
case SQ_TEX_VTX_VALID_TEXTURE:
/* tex base */
r = r600_cs_packet_next_reloc(p, &reloc);
return -EINVAL;
}
ib[idx+1+(i*7)+0] += (u32)((reloc->lobj.gpu_offset) & 0xffffffff);
- ib[idx+1+(i*7)+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+ ib[idx+1+(i*7)+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
break;
case SQ_TEX_VTX_INVALID_TEXTURE:
case SQ_TEX_VTX_INVALID_BUFFER:
}
break;
case PACKET3_SET_ALU_CONST:
- start_reg = (ib[idx+0] << 2) + PACKET3_SET_ALU_CONST_OFFSET;
+ start_reg = (idx_value << 2) + PACKET3_SET_ALU_CONST_OFFSET;
end_reg = 4 * pkt->count + start_reg - 4;
if ((start_reg < PACKET3_SET_ALU_CONST_OFFSET) ||
(start_reg >= PACKET3_SET_ALU_CONST_END) ||
}
break;
case PACKET3_SET_BOOL_CONST:
- start_reg = (ib[idx+0] << 2) + PACKET3_SET_BOOL_CONST_OFFSET;
+ start_reg = (idx_value << 2) + PACKET3_SET_BOOL_CONST_OFFSET;
end_reg = 4 * pkt->count + start_reg - 4;
if ((start_reg < PACKET3_SET_BOOL_CONST_OFFSET) ||
(start_reg >= PACKET3_SET_BOOL_CONST_END) ||
}
break;
case PACKET3_SET_LOOP_CONST:
- start_reg = (ib[idx+0] << 2) + PACKET3_SET_LOOP_CONST_OFFSET;
+ start_reg = (idx_value << 2) + PACKET3_SET_LOOP_CONST_OFFSET;
end_reg = 4 * pkt->count + start_reg - 4;
if ((start_reg < PACKET3_SET_LOOP_CONST_OFFSET) ||
(start_reg >= PACKET3_SET_LOOP_CONST_END) ||
}
break;
case PACKET3_SET_CTL_CONST:
- start_reg = (ib[idx+0] << 2) + PACKET3_SET_CTL_CONST_OFFSET;
+ start_reg = (idx_value << 2) + PACKET3_SET_CTL_CONST_OFFSET;
end_reg = 4 * pkt->count + start_reg - 4;
if ((start_reg < PACKET3_SET_CTL_CONST_OFFSET) ||
(start_reg >= PACKET3_SET_CTL_CONST_END) ||
DRM_ERROR("bad SET_SAMPLER\n");
return -EINVAL;
}
- start_reg = (ib[idx+0] << 2) + PACKET3_SET_SAMPLER_OFFSET;
+ start_reg = (idx_value << 2) + PACKET3_SET_SAMPLER_OFFSET;
end_reg = 4 * pkt->count + start_reg - 4;
if ((start_reg < PACKET3_SET_SAMPLER_OFFSET) ||
(start_reg >= PACKET3_SET_SAMPLER_END) ||
kfree(parser->relocs);
for (i = 0; i < parser->nchunks; i++) {
kfree(parser->chunks[i].kdata);
+ kfree(parser->chunks[i].kpage[0]);
+ kfree(parser->chunks[i].kpage[1]);
}
kfree(parser->chunks);
kfree(parser->chunks_array);
* uncached). */
ib_chunk = &parser.chunks[parser.chunk_ib_idx];
parser.ib->length_dw = ib_chunk->length_dw;
- memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
*l = parser.ib->length_dw;
r = r600_cs_parse(&parser);
if (r) {
r600_cs_parser_fini(&parser, r);
return r;
}
+ r = radeon_cs_finish_pages(&parser);
+ if (r) {
+ DRM_ERROR("Invalid command stream !\n");
+ r600_cs_parser_fini(&parser, r);
+ return r;
+ }
r600_cs_parser_fini(&parser, r);
return r;
}
#define G_000E50_MCDW_BUSY(x) (((x) >> 13) & 1)
#define G_000E50_SEM_BUSY(x) (((x) >> 14) & 1)
#define G_000E50_RLC_BUSY(x) (((x) >> 15) & 1)
+#define G_000E50_BIF_BUSY(x) (((x) >> 29) & 1)
#define R_000E60_SRBM_SOFT_RESET 0x0E60
#define S_000E60_SOFT_RESET_BIF(x) (((x) & 1) << 1)
#define S_000E60_SOFT_RESET_CG(x) (((x) & 1) << 2)
* - TESTING, TESTING, TESTING
*/
+/* Initialization path:
+ * We expect that acceleration initialization might fail for various
+ * reasons even thought we work hard to make it works on most
+ * configurations. In order to still have a working userspace in such
+ * situation the init path must succeed up to the memory controller
+ * initialization point. Failure before this point are considered as
+ * fatal error. Here is the init callchain :
+ * radeon_device_init perform common structure, mutex initialization
+ * asic_init setup the GPU memory layout and perform all
+ * one time initialization (failure in this
+ * function are considered fatal)
+ * asic_startup setup the GPU acceleration, in order to
+ * follow guideline the first thing this
+ * function should do is setting the GPU
+ * memory controller (only MC setup failure
+ * are considered as fatal)
+ */
+
#include <asm/atomic.h>
#include <linux/wait.h>
#include <linux/list.h>
#include <linux/kref.h>
+#include "radeon_family.h"
#include "radeon_mode.h"
#include "radeon_reg.h"
#define RADEONFB_CONN_LIMIT 4
#define RADEON_BIOS_NUM_SCRATCH 8
-enum radeon_family {
- CHIP_R100,
- CHIP_RV100,
- CHIP_RS100,
- CHIP_RV200,
- CHIP_RS200,
- CHIP_R200,
- CHIP_RV250,
- CHIP_RS300,
- CHIP_RV280,
- CHIP_R300,
- CHIP_R350,
- CHIP_RV350,
- CHIP_RV380,
- CHIP_R420,
- CHIP_R423,
- CHIP_RV410,
- CHIP_RS400,
- CHIP_RS480,
- CHIP_RS600,
- CHIP_RS690,
- CHIP_RS740,
- CHIP_RV515,
- CHIP_R520,
- CHIP_RV530,
- CHIP_RV560,
- CHIP_RV570,
- CHIP_R580,
- CHIP_R600,
- CHIP_RV610,
- CHIP_RV630,
- CHIP_RV670,
- CHIP_RV620,
- CHIP_RV635,
- CHIP_RS780,
- CHIP_RS880,
- CHIP_RV770,
- CHIP_RV730,
- CHIP_RV710,
- CHIP_RV740,
- CHIP_LAST,
-};
-
-enum radeon_chip_flags {
- RADEON_FAMILY_MASK = 0x0000ffffUL,
- RADEON_FLAGS_MASK = 0xffff0000UL,
- RADEON_IS_MOBILITY = 0x00010000UL,
- RADEON_IS_IGP = 0x00020000UL,
- RADEON_SINGLE_CRTC = 0x00040000UL,
- RADEON_IS_AGP = 0x00080000UL,
- RADEON_HAS_HIERZ = 0x00100000UL,
- RADEON_IS_PCIE = 0x00200000UL,
- RADEON_NEW_MEMMAP = 0x00400000UL,
- RADEON_IS_PCI = 0x00800000UL,
- RADEON_IS_IGPGART = 0x01000000UL,
-};
-
-
/*
* Errata workarounds.
*/
unsigned long idx;
uint64_t gpu_addr;
struct radeon_fence *fence;
- volatile uint32_t *ptr;
+ uint32_t *ptr;
uint32_t length_dw;
};
struct radeon_cs_chunk {
uint32_t chunk_id;
uint32_t length_dw;
+ int kpage_idx[2];
+ uint32_t *kpage[2];
uint32_t *kdata;
+ void __user *user_ptr;
+ int last_copied_page;
+ int last_page_index;
};
struct radeon_cs_parser {
struct radeon_ib *ib;
void *track;
unsigned family;
+ int parser_error;
};
+extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx);
+extern int radeon_cs_finish_pages(struct radeon_cs_parser *p);
+
+
+static inline u32 radeon_get_ib_value(struct radeon_cs_parser *p, int idx)
+{
+ struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+ u32 pg_idx, pg_offset;
+ u32 idx_value = 0;
+ int new_page;
+
+ pg_idx = (idx * 4) / PAGE_SIZE;
+ pg_offset = (idx * 4) % PAGE_SIZE;
+
+ if (ibc->kpage_idx[0] == pg_idx)
+ return ibc->kpage[0][pg_offset/4];
+ if (ibc->kpage_idx[1] == pg_idx)
+ return ibc->kpage[1][pg_offset/4];
+
+ new_page = radeon_cs_update_pages(p, pg_idx);
+ if (new_page < 0) {
+ p->parser_error = new_page;
+ return 0;
+ }
+
+ idx_value = ibc->kpage[new_page][pg_offset/4];
+ return idx_value;
+}
+
struct radeon_cs_packet {
unsigned idx;
unsigned type;
void (*fini)(struct radeon_device *rdev);
int (*resume)(struct radeon_device *rdev);
int (*suspend)(struct radeon_device *rdev);
- void (*errata)(struct radeon_device *rdev);
- void (*vram_info)(struct radeon_device *rdev);
void (*vga_set_state)(struct radeon_device *rdev, bool state);
int (*gpu_reset)(struct radeon_device *rdev);
- int (*mc_init)(struct radeon_device *rdev);
- void (*mc_fini)(struct radeon_device *rdev);
- int (*wb_init)(struct radeon_device *rdev);
- void (*wb_fini)(struct radeon_device *rdev);
- int (*gart_init)(struct radeon_device *rdev);
- void (*gart_fini)(struct radeon_device *rdev);
- int (*gart_enable)(struct radeon_device *rdev);
- void (*gart_disable)(struct radeon_device *rdev);
void (*gart_tlb_flush)(struct radeon_device *rdev);
int (*gart_set_page)(struct radeon_device *rdev, int i, uint64_t addr);
int (*cp_init)(struct radeon_device *rdev, unsigned ring_size);
void (*ring_start)(struct radeon_device *rdev);
int (*ring_test)(struct radeon_device *rdev);
void (*ring_ib_execute)(struct radeon_device *rdev, struct radeon_ib *ib);
- int (*ib_test)(struct radeon_device *rdev);
int (*irq_set)(struct radeon_device *rdev);
int (*irq_process)(struct radeon_device *rdev);
u32 (*get_vblank_counter)(struct radeon_device *rdev, int crtc);
bool shutdown;
bool suspend;
bool need_dma32;
- bool new_init_path;
bool accel_working;
struct radeon_surface_reg surface_regs[RADEON_GEM_MAX_SURFACES];
const struct firmware *me_fw; /* all family ME firmware */
#define radeon_resume(rdev) (rdev)->asic->resume((rdev))
#define radeon_suspend(rdev) (rdev)->asic->suspend((rdev))
#define radeon_cs_parse(p) rdev->asic->cs_parse((p))
-#define radeon_errata(rdev) (rdev)->asic->errata((rdev))
-#define radeon_vram_info(rdev) (rdev)->asic->vram_info((rdev))
#define radeon_vga_set_state(rdev, state) (rdev)->asic->vga_set_state((rdev), (state))
#define radeon_gpu_reset(rdev) (rdev)->asic->gpu_reset((rdev))
-#define radeon_mc_init(rdev) (rdev)->asic->mc_init((rdev))
-#define radeon_mc_fini(rdev) (rdev)->asic->mc_fini((rdev))
-#define radeon_wb_init(rdev) (rdev)->asic->wb_init((rdev))
-#define radeon_wb_fini(rdev) (rdev)->asic->wb_fini((rdev))
-#define radeon_gpu_gart_init(rdev) (rdev)->asic->gart_init((rdev))
-#define radeon_gpu_gart_fini(rdev) (rdev)->asic->gart_fini((rdev))
-#define radeon_gart_enable(rdev) (rdev)->asic->gart_enable((rdev))
-#define radeon_gart_disable(rdev) (rdev)->asic->gart_disable((rdev))
#define radeon_gart_tlb_flush(rdev) (rdev)->asic->gart_tlb_flush((rdev))
#define radeon_gart_set_page(rdev, i, p) (rdev)->asic->gart_set_page((rdev), (i), (p))
-#define radeon_cp_init(rdev,rsize) (rdev)->asic->cp_init((rdev), (rsize))
-#define radeon_cp_fini(rdev) (rdev)->asic->cp_fini((rdev))
-#define radeon_cp_disable(rdev) (rdev)->asic->cp_disable((rdev))
#define radeon_cp_commit(rdev) (rdev)->asic->cp_commit((rdev))
#define radeon_ring_start(rdev) (rdev)->asic->ring_start((rdev))
#define radeon_ring_test(rdev) (rdev)->asic->ring_test((rdev))
#define radeon_ring_ib_execute(rdev, ib) (rdev)->asic->ring_ib_execute((rdev), (ib))
-#define radeon_ib_test(rdev) (rdev)->asic->ib_test((rdev))
#define radeon_irq_set(rdev) (rdev)->asic->irq_set((rdev))
#define radeon_irq_process(rdev) (rdev)->asic->irq_process((rdev))
#define radeon_get_vblank_counter(rdev, crtc) (rdev)->asic->get_vblank_counter((rdev), (crtc))
extern void radeon_scratch_init(struct radeon_device *rdev);
extern void radeon_surface_init(struct radeon_device *rdev);
extern int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data);
+extern void radeon_legacy_set_clock_gating(struct radeon_device *rdev, int enable);
+extern void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
/* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280 */
struct r100_mc_save {
extern void r100_wb_disable(struct radeon_device *rdev);
extern void r100_wb_fini(struct radeon_device *rdev);
extern int r100_wb_init(struct radeon_device *rdev);
+extern void r100_hdp_reset(struct radeon_device *rdev);
+extern int r100_rb2d_reset(struct radeon_device *rdev);
+extern int r100_cp_reset(struct radeon_device *rdev);
+extern void r100_vga_render_disable(struct radeon_device *rdev);
+extern int r100_cs_track_check_pkt3_indx_buffer(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ struct radeon_object *robj);
+extern int r100_cs_parse_packet0(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ const unsigned *auth, unsigned n,
+ radeon_packet0_check_t check);
+extern int r100_cs_packet_parse(struct radeon_cs_parser *p,
+ struct radeon_cs_packet *pkt,
+ unsigned idx);
+
+/* rv200,rv250,rv280 */
+extern void r200_set_safe_registers(struct radeon_device *rdev);
/* r300,r350,rv350,rv370,rv380 */
extern void r300_set_reg_safe(struct radeon_device *rdev);
extern void r300_mc_program(struct radeon_device *rdev);
extern void r300_vram_info(struct radeon_device *rdev);
+extern void r300_clock_startup(struct radeon_device *rdev);
+extern int r300_mc_wait_for_idle(struct radeon_device *rdev);
extern int rv370_pcie_gart_init(struct radeon_device *rdev);
extern void rv370_pcie_gart_fini(struct radeon_device *rdev);
extern int rv370_pcie_gart_enable(struct radeon_device *rdev);
extern void rv370_pcie_gart_disable(struct radeon_device *rdev);
/* r420,r423,rv410 */
+extern int r420_mc_init(struct radeon_device *rdev);
extern u32 r420_mc_rreg(struct radeon_device *rdev, u32 reg);
extern void r420_mc_wreg(struct radeon_device *rdev, u32 reg, u32 v);
extern int r420_debugfs_pipes_info_init(struct radeon_device *rdev);
+extern void r420_pipes_init(struct radeon_device *rdev);
/* rv515 */
+struct rv515_mc_save {
+ u32 d1vga_control;
+ u32 d2vga_control;
+ u32 vga_render_control;
+ u32 vga_hdp_control;
+ u32 d1crtc_control;
+ u32 d2crtc_control;
+};
extern void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+extern void rv515_vga_render_disable(struct radeon_device *rdev);
+extern void rv515_set_safe_registers(struct radeon_device *rdev);
+extern void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save);
+extern void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save);
+extern void rv515_clock_startup(struct radeon_device *rdev);
+extern void rv515_debugfs(struct radeon_device *rdev);
+extern int rv515_suspend(struct radeon_device *rdev);
+
+/* rs400 */
+extern int rs400_gart_init(struct radeon_device *rdev);
+extern int rs400_gart_enable(struct radeon_device *rdev);
+extern void rs400_gart_adjust_size(struct radeon_device *rdev);
+extern void rs400_gart_disable(struct radeon_device *rdev);
+extern void rs400_gart_fini(struct radeon_device *rdev);
+
+/* rs600 */
+extern void rs600_set_safe_registers(struct radeon_device *rdev);
+extern int rs600_irq_set(struct radeon_device *rdev);
+extern void rs600_irq_disable(struct radeon_device *rdev);
/* rs690, rs740 */
extern void rs690_line_buffer_adjust(struct radeon_device *rdev,
extern void r600_pcie_gart_tlb_flush(struct radeon_device *rdev);
extern int r600_ib_test(struct radeon_device *rdev);
extern int r600_ring_test(struct radeon_device *rdev);
-extern int r600_wb_init(struct radeon_device *rdev);
extern void r600_wb_fini(struct radeon_device *rdev);
+extern int r600_wb_enable(struct radeon_device *rdev);
+extern void r600_wb_disable(struct radeon_device *rdev);
extern void r600_scratch_init(struct radeon_device *rdev);
extern int r600_blit_init(struct radeon_device *rdev);
extern void r600_blit_fini(struct radeon_device *rdev);
/*
* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280
*/
-int r100_init(struct radeon_device *rdev);
-int r200_init(struct radeon_device *rdev);
+extern int r100_init(struct radeon_device *rdev);
+extern void r100_fini(struct radeon_device *rdev);
+extern int r100_suspend(struct radeon_device *rdev);
+extern int r100_resume(struct radeon_device *rdev);
uint32_t r100_mm_rreg(struct radeon_device *rdev, uint32_t reg);
void r100_mm_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
-void r100_errata(struct radeon_device *rdev);
-void r100_vram_info(struct radeon_device *rdev);
void r100_vga_set_state(struct radeon_device *rdev, bool state);
int r100_gpu_reset(struct radeon_device *rdev);
-int r100_mc_init(struct radeon_device *rdev);
-void r100_mc_fini(struct radeon_device *rdev);
u32 r100_get_vblank_counter(struct radeon_device *rdev, int crtc);
-int r100_wb_init(struct radeon_device *rdev);
-void r100_wb_fini(struct radeon_device *rdev);
-int r100_pci_gart_init(struct radeon_device *rdev);
-void r100_pci_gart_fini(struct radeon_device *rdev);
-int r100_pci_gart_enable(struct radeon_device *rdev);
-void r100_pci_gart_disable(struct radeon_device *rdev);
void r100_pci_gart_tlb_flush(struct radeon_device *rdev);
int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
-int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-void r100_cp_fini(struct radeon_device *rdev);
-void r100_cp_disable(struct radeon_device *rdev);
void r100_cp_commit(struct radeon_device *rdev);
void r100_ring_start(struct radeon_device *rdev);
int r100_irq_set(struct radeon_device *rdev);
int r100_clear_surface_reg(struct radeon_device *rdev, int reg);
void r100_bandwidth_update(struct radeon_device *rdev);
void r100_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
-int r100_ib_test(struct radeon_device *rdev);
int r100_ring_test(struct radeon_device *rdev);
static struct radeon_asic r100_asic = {
.init = &r100_init,
- .errata = &r100_errata,
- .vram_info = &r100_vram_info,
+ .fini = &r100_fini,
+ .suspend = &r100_suspend,
+ .resume = &r100_resume,
.vga_set_state = &r100_vga_set_state,
.gpu_reset = &r100_gpu_reset,
- .mc_init = &r100_mc_init,
- .mc_fini = &r100_mc_fini,
- .wb_init = &r100_wb_init,
- .wb_fini = &r100_wb_fini,
- .gart_init = &r100_pci_gart_init,
- .gart_fini = &r100_pci_gart_fini,
- .gart_enable = &r100_pci_gart_enable,
- .gart_disable = &r100_pci_gart_disable,
.gart_tlb_flush = &r100_pci_gart_tlb_flush,
.gart_set_page = &r100_pci_gart_set_page,
- .cp_init = &r100_cp_init,
- .cp_fini = &r100_cp_fini,
- .cp_disable = &r100_cp_disable,
.cp_commit = &r100_cp_commit,
.ring_start = &r100_ring_start,
.ring_test = &r100_ring_test,
.ring_ib_execute = &r100_ring_ib_execute,
- .ib_test = &r100_ib_test,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
.get_vblank_counter = &r100_get_vblank_counter,
/*
* r300,r350,rv350,rv380
*/
-int r300_init(struct radeon_device *rdev);
-void r300_errata(struct radeon_device *rdev);
-void r300_vram_info(struct radeon_device *rdev);
-int r300_gpu_reset(struct radeon_device *rdev);
-int r300_mc_init(struct radeon_device *rdev);
-void r300_mc_fini(struct radeon_device *rdev);
-void r300_ring_start(struct radeon_device *rdev);
-void r300_fence_ring_emit(struct radeon_device *rdev,
- struct radeon_fence *fence);
-int r300_cs_parse(struct radeon_cs_parser *p);
-int rv370_pcie_gart_init(struct radeon_device *rdev);
-void rv370_pcie_gart_fini(struct radeon_device *rdev);
-int rv370_pcie_gart_enable(struct radeon_device *rdev);
-void rv370_pcie_gart_disable(struct radeon_device *rdev);
-void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev);
-int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
-uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
-void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
-void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes);
-int r300_copy_dma(struct radeon_device *rdev,
- uint64_t src_offset,
- uint64_t dst_offset,
- unsigned num_pages,
- struct radeon_fence *fence);
-
+extern int r300_init(struct radeon_device *rdev);
+extern void r300_fini(struct radeon_device *rdev);
+extern int r300_suspend(struct radeon_device *rdev);
+extern int r300_resume(struct radeon_device *rdev);
+extern int r300_gpu_reset(struct radeon_device *rdev);
+extern void r300_ring_start(struct radeon_device *rdev);
+extern void r300_fence_ring_emit(struct radeon_device *rdev,
+ struct radeon_fence *fence);
+extern int r300_cs_parse(struct radeon_cs_parser *p);
+extern void rv370_pcie_gart_tlb_flush(struct radeon_device *rdev);
+extern int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
+extern uint32_t rv370_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
+extern void rv370_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+extern void rv370_set_pcie_lanes(struct radeon_device *rdev, int lanes);
+extern int r300_copy_dma(struct radeon_device *rdev,
+ uint64_t src_offset,
+ uint64_t dst_offset,
+ unsigned num_pages,
+ struct radeon_fence *fence);
static struct radeon_asic r300_asic = {
.init = &r300_init,
- .errata = &r300_errata,
- .vram_info = &r300_vram_info,
+ .fini = &r300_fini,
+ .suspend = &r300_suspend,
+ .resume = &r300_resume,
.vga_set_state = &r100_vga_set_state,
.gpu_reset = &r300_gpu_reset,
- .mc_init = &r300_mc_init,
- .mc_fini = &r300_mc_fini,
- .wb_init = &r100_wb_init,
- .wb_fini = &r100_wb_fini,
- .gart_init = &r100_pci_gart_init,
- .gart_fini = &r100_pci_gart_fini,
- .gart_enable = &r100_pci_gart_enable,
- .gart_disable = &r100_pci_gart_disable,
.gart_tlb_flush = &r100_pci_gart_tlb_flush,
.gart_set_page = &r100_pci_gart_set_page,
- .cp_init = &r100_cp_init,
- .cp_fini = &r100_cp_fini,
- .cp_disable = &r100_cp_disable,
.cp_commit = &r100_cp_commit,
.ring_start = &r300_ring_start,
.ring_test = &r100_ring_test,
.ring_ib_execute = &r100_ring_ib_execute,
- .ib_test = &r100_ib_test,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
.get_vblank_counter = &r100_get_vblank_counter,
.fini = &r420_fini,
.suspend = &r420_suspend,
.resume = &r420_resume,
- .errata = NULL,
- .vram_info = NULL,
.vga_set_state = &r100_vga_set_state,
.gpu_reset = &r300_gpu_reset,
- .mc_init = NULL,
- .mc_fini = NULL,
- .wb_init = NULL,
- .wb_fini = NULL,
- .gart_enable = NULL,
- .gart_disable = NULL,
.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
.gart_set_page = &rv370_pcie_gart_set_page,
- .cp_init = NULL,
- .cp_fini = NULL,
- .cp_disable = NULL,
.cp_commit = &r100_cp_commit,
.ring_start = &r300_ring_start,
.ring_test = &r100_ring_test,
.ring_ib_execute = &r100_ring_ib_execute,
- .ib_test = NULL,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
.get_vblank_counter = &r100_get_vblank_counter,
/*
* rs400,rs480
*/
-void rs400_errata(struct radeon_device *rdev);
-void rs400_vram_info(struct radeon_device *rdev);
-int rs400_mc_init(struct radeon_device *rdev);
-void rs400_mc_fini(struct radeon_device *rdev);
-int rs400_gart_init(struct radeon_device *rdev);
-void rs400_gart_fini(struct radeon_device *rdev);
-int rs400_gart_enable(struct radeon_device *rdev);
-void rs400_gart_disable(struct radeon_device *rdev);
+extern int rs400_init(struct radeon_device *rdev);
+extern void rs400_fini(struct radeon_device *rdev);
+extern int rs400_suspend(struct radeon_device *rdev);
+extern int rs400_resume(struct radeon_device *rdev);
void rs400_gart_tlb_flush(struct radeon_device *rdev);
int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs400_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
static struct radeon_asic rs400_asic = {
- .init = &r300_init,
- .errata = &rs400_errata,
- .vram_info = &rs400_vram_info,
+ .init = &rs400_init,
+ .fini = &rs400_fini,
+ .suspend = &rs400_suspend,
+ .resume = &rs400_resume,
.vga_set_state = &r100_vga_set_state,
.gpu_reset = &r300_gpu_reset,
- .mc_init = &rs400_mc_init,
- .mc_fini = &rs400_mc_fini,
- .wb_init = &r100_wb_init,
- .wb_fini = &r100_wb_fini,
- .gart_init = &rs400_gart_init,
- .gart_fini = &rs400_gart_fini,
- .gart_enable = &rs400_gart_enable,
- .gart_disable = &rs400_gart_disable,
.gart_tlb_flush = &rs400_gart_tlb_flush,
.gart_set_page = &rs400_gart_set_page,
- .cp_init = &r100_cp_init,
- .cp_fini = &r100_cp_fini,
- .cp_disable = &r100_cp_disable,
.cp_commit = &r100_cp_commit,
.ring_start = &r300_ring_start,
.ring_test = &r100_ring_test,
.ring_ib_execute = &r100_ring_ib_execute,
- .ib_test = &r100_ib_test,
.irq_set = &r100_irq_set,
.irq_process = &r100_irq_process,
.get_vblank_counter = &r100_get_vblank_counter,
/*
* rs600.
*/
-int rs600_init(struct radeon_device *rdev);
-void rs600_errata(struct radeon_device *rdev);
-void rs600_vram_info(struct radeon_device *rdev);
-int rs600_mc_init(struct radeon_device *rdev);
-void rs600_mc_fini(struct radeon_device *rdev);
+extern int rs600_init(struct radeon_device *rdev);
+extern void rs600_fini(struct radeon_device *rdev);
+extern int rs600_suspend(struct radeon_device *rdev);
+extern int rs600_resume(struct radeon_device *rdev);
int rs600_irq_set(struct radeon_device *rdev);
int rs600_irq_process(struct radeon_device *rdev);
u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc);
-int rs600_gart_init(struct radeon_device *rdev);
-void rs600_gart_fini(struct radeon_device *rdev);
-int rs600_gart_enable(struct radeon_device *rdev);
-void rs600_gart_disable(struct radeon_device *rdev);
void rs600_gart_tlb_flush(struct radeon_device *rdev);
int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs600_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs600_asic = {
.init = &rs600_init,
- .errata = &rs600_errata,
- .vram_info = &rs600_vram_info,
+ .fini = &rs600_fini,
+ .suspend = &rs600_suspend,
+ .resume = &rs600_resume,
.vga_set_state = &r100_vga_set_state,
.gpu_reset = &r300_gpu_reset,
- .mc_init = &rs600_mc_init,
- .mc_fini = &rs600_mc_fini,
- .wb_init = &r100_wb_init,
- .wb_fini = &r100_wb_fini,
- .gart_init = &rs600_gart_init,
- .gart_fini = &rs600_gart_fini,
- .gart_enable = &rs600_gart_enable,
- .gart_disable = &rs600_gart_disable,
.gart_tlb_flush = &rs600_gart_tlb_flush,
.gart_set_page = &rs600_gart_set_page,
- .cp_init = &r100_cp_init,
- .cp_fini = &r100_cp_fini,
- .cp_disable = &r100_cp_disable,
.cp_commit = &r100_cp_commit,
.ring_start = &r300_ring_start,
.ring_test = &r100_ring_test,
.ring_ib_execute = &r100_ring_ib_execute,
- .ib_test = &r100_ib_test,
.irq_set = &rs600_irq_set,
.irq_process = &rs600_irq_process,
.get_vblank_counter = &rs600_get_vblank_counter,
/*
* rs690,rs740
*/
-void rs690_errata(struct radeon_device *rdev);
-void rs690_vram_info(struct radeon_device *rdev);
-int rs690_mc_init(struct radeon_device *rdev);
-void rs690_mc_fini(struct radeon_device *rdev);
+int rs690_init(struct radeon_device *rdev);
+void rs690_fini(struct radeon_device *rdev);
+int rs690_resume(struct radeon_device *rdev);
+int rs690_suspend(struct radeon_device *rdev);
uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
void rs690_bandwidth_update(struct radeon_device *rdev);
static struct radeon_asic rs690_asic = {
- .init = &rs600_init,
- .errata = &rs690_errata,
- .vram_info = &rs690_vram_info,
+ .init = &rs690_init,
+ .fini = &rs690_fini,
+ .suspend = &rs690_suspend,
+ .resume = &rs690_resume,
.vga_set_state = &r100_vga_set_state,
.gpu_reset = &r300_gpu_reset,
- .mc_init = &rs690_mc_init,
- .mc_fini = &rs690_mc_fini,
- .wb_init = &r100_wb_init,
- .wb_fini = &r100_wb_fini,
- .gart_init = &rs400_gart_init,
- .gart_fini = &rs400_gart_fini,
- .gart_enable = &rs400_gart_enable,
- .gart_disable = &rs400_gart_disable,
.gart_tlb_flush = &rs400_gart_tlb_flush,
.gart_set_page = &rs400_gart_set_page,
- .cp_init = &r100_cp_init,
- .cp_fini = &r100_cp_fini,
- .cp_disable = &r100_cp_disable,
.cp_commit = &r100_cp_commit,
.ring_start = &r300_ring_start,
.ring_test = &r100_ring_test,
.ring_ib_execute = &r100_ring_ib_execute,
- .ib_test = &r100_ib_test,
.irq_set = &rs600_irq_set,
.irq_process = &rs600_irq_process,
.get_vblank_counter = &rs600_get_vblank_counter,
* rv515
*/
int rv515_init(struct radeon_device *rdev);
-void rv515_errata(struct radeon_device *rdev);
-void rv515_vram_info(struct radeon_device *rdev);
+void rv515_fini(struct radeon_device *rdev);
int rv515_gpu_reset(struct radeon_device *rdev);
-int rv515_mc_init(struct radeon_device *rdev);
-void rv515_mc_fini(struct radeon_device *rdev);
uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg);
void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
void rv515_ring_start(struct radeon_device *rdev);
uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
void rv515_bandwidth_update(struct radeon_device *rdev);
+int rv515_resume(struct radeon_device *rdev);
+int rv515_suspend(struct radeon_device *rdev);
static struct radeon_asic rv515_asic = {
.init = &rv515_init,
- .errata = &rv515_errata,
- .vram_info = &rv515_vram_info,
+ .fini = &rv515_fini,
+ .suspend = &rv515_suspend,
+ .resume = &rv515_resume,
.vga_set_state = &r100_vga_set_state,
.gpu_reset = &rv515_gpu_reset,
- .mc_init = &rv515_mc_init,
- .mc_fini = &rv515_mc_fini,
- .wb_init = &r100_wb_init,
- .wb_fini = &r100_wb_fini,
- .gart_init = &rv370_pcie_gart_init,
- .gart_fini = &rv370_pcie_gart_fini,
- .gart_enable = &rv370_pcie_gart_enable,
- .gart_disable = &rv370_pcie_gart_disable,
.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
.gart_set_page = &rv370_pcie_gart_set_page,
- .cp_init = &r100_cp_init,
- .cp_fini = &r100_cp_fini,
- .cp_disable = &r100_cp_disable,
.cp_commit = &r100_cp_commit,
.ring_start = &rv515_ring_start,
.ring_test = &r100_ring_test,
.ring_ib_execute = &r100_ring_ib_execute,
- .ib_test = &r100_ib_test,
.irq_set = &rs600_irq_set,
.irq_process = &rs600_irq_process,
.get_vblank_counter = &rs600_get_vblank_counter,
/*
* r520,rv530,rv560,rv570,r580
*/
-void r520_errata(struct radeon_device *rdev);
-void r520_vram_info(struct radeon_device *rdev);
-int r520_mc_init(struct radeon_device *rdev);
-void r520_mc_fini(struct radeon_device *rdev);
-void r520_bandwidth_update(struct radeon_device *rdev);
+int r520_init(struct radeon_device *rdev);
+int r520_resume(struct radeon_device *rdev);
static struct radeon_asic r520_asic = {
- .init = &rv515_init,
- .errata = &r520_errata,
- .vram_info = &r520_vram_info,
+ .init = &r520_init,
+ .fini = &rv515_fini,
+ .suspend = &rv515_suspend,
+ .resume = &r520_resume,
.vga_set_state = &r100_vga_set_state,
.gpu_reset = &rv515_gpu_reset,
- .mc_init = &r520_mc_init,
- .mc_fini = &r520_mc_fini,
- .wb_init = &r100_wb_init,
- .wb_fini = &r100_wb_fini,
- .gart_init = &rv370_pcie_gart_init,
- .gart_fini = &rv370_pcie_gart_fini,
- .gart_enable = &rv370_pcie_gart_enable,
- .gart_disable = &rv370_pcie_gart_disable,
.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
.gart_set_page = &rv370_pcie_gart_set_page,
- .cp_init = &r100_cp_init,
- .cp_fini = &r100_cp_fini,
- .cp_disable = &r100_cp_disable,
.cp_commit = &r100_cp_commit,
.ring_start = &rv515_ring_start,
.ring_test = &r100_ring_test,
.ring_ib_execute = &r100_ring_ib_execute,
- .ib_test = &r100_ib_test,
.irq_set = &rs600_irq_set,
.irq_process = &rs600_irq_process,
.get_vblank_counter = &rs600_get_vblank_counter,
.set_clock_gating = &radeon_atom_set_clock_gating,
.set_surface_reg = r100_set_surface_reg,
.clear_surface_reg = r100_clear_surface_reg,
- .bandwidth_update = &r520_bandwidth_update,
+ .bandwidth_update = &rv515_bandwidth_update,
};
/*
uint32_t offset, uint32_t obj_size);
int r600_clear_surface_reg(struct radeon_device *rdev, int reg);
void r600_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
-int r600_ib_test(struct radeon_device *rdev);
int r600_ring_test(struct radeon_device *rdev);
int r600_copy_blit(struct radeon_device *rdev,
uint64_t src_offset, uint64_t dst_offset,
unsigned num_pages, struct radeon_fence *fence);
static struct radeon_asic r600_asic = {
- .errata = NULL,
.init = &r600_init,
.fini = &r600_fini,
.suspend = &r600_suspend,
.resume = &r600_resume,
.cp_commit = &r600_cp_commit,
- .vram_info = NULL,
.vga_set_state = &r600_vga_set_state,
.gpu_reset = &r600_gpu_reset,
- .mc_init = NULL,
- .mc_fini = NULL,
- .wb_init = &r600_wb_init,
- .wb_fini = &r600_wb_fini,
- .gart_enable = NULL,
- .gart_disable = NULL,
.gart_tlb_flush = &r600_pcie_gart_tlb_flush,
.gart_set_page = &rs600_gart_set_page,
- .cp_init = NULL,
- .cp_fini = NULL,
- .cp_disable = NULL,
- .ring_start = NULL,
.ring_test = &r600_ring_test,
.ring_ib_execute = &r600_ring_ib_execute,
- .ib_test = &r600_ib_test,
.irq_set = &r600_irq_set,
.irq_process = &r600_irq_process,
.fence_ring_emit = &r600_fence_ring_emit,
.set_clock_gating = &radeon_atom_set_clock_gating,
.set_surface_reg = r600_set_surface_reg,
.clear_surface_reg = r600_clear_surface_reg,
- .bandwidth_update = &r520_bandwidth_update,
+ .bandwidth_update = &rv515_bandwidth_update,
};
/*
int rv770_gpu_reset(struct radeon_device *rdev);
static struct radeon_asic rv770_asic = {
- .errata = NULL,
.init = &rv770_init,
.fini = &rv770_fini,
.suspend = &rv770_suspend,
.resume = &rv770_resume,
.cp_commit = &r600_cp_commit,
- .vram_info = NULL,
.gpu_reset = &rv770_gpu_reset,
.vga_set_state = &r600_vga_set_state,
- .mc_init = NULL,
- .mc_fini = NULL,
- .wb_init = &r600_wb_init,
- .wb_fini = &r600_wb_fini,
- .gart_enable = NULL,
- .gart_disable = NULL,
.gart_tlb_flush = &r600_pcie_gart_tlb_flush,
.gart_set_page = &rs600_gart_set_page,
- .cp_init = NULL,
- .cp_fini = NULL,
- .cp_disable = NULL,
- .ring_start = NULL,
.ring_test = &r600_ring_test,
.ring_ib_execute = &r600_ring_ib_execute,
- .ib_test = &r600_ib_test,
.irq_set = &r600_irq_set,
.irq_process = &r600_irq_process,
.fence_ring_emit = &r600_fence_ring_emit,
.set_clock_gating = &radeon_atom_set_clock_gating,
.set_surface_reg = r600_set_surface_reg,
.clear_surface_reg = r600_clear_surface_reg,
- .bandwidth_update = &r520_bandwidth_update,
+ .bandwidth_update = &rv515_bandwidth_update,
};
#endif
(le16_to_cpu(path->usConnObjectId) &
OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
- if ((le16_to_cpu(path->usDeviceTag) ==
- ATOM_DEVICE_TV1_SUPPORT)
- || (le16_to_cpu(path->usDeviceTag) ==
- ATOM_DEVICE_TV2_SUPPORT)
- || (le16_to_cpu(path->usDeviceTag) ==
- ATOM_DEVICE_CV_SUPPORT))
+ /* TODO CV support */
+ if (le16_to_cpu(path->usDeviceTag) ==
+ ATOM_DEVICE_CV_SUPPORT)
continue;
if ((rdev->family == CHIP_RS780) &&
/*
* BIOS.
*/
+
+/* If you boot an IGP board with a discrete card as the primary,
+ * the IGP rom is not accessible via the rom bar as the IGP rom is
+ * part of the system bios. On boot, the system bios puts a
+ * copy of the igp rom at the start of vram if a discrete card is
+ * present.
+ */
+static bool igp_read_bios_from_vram(struct radeon_device *rdev)
+{
+ uint8_t __iomem *bios;
+ resource_size_t vram_base;
+ resource_size_t size = 256 * 1024; /* ??? */
+
+ rdev->bios = NULL;
+ vram_base = drm_get_resource_start(rdev->ddev, 0);
+ bios = ioremap(vram_base, size);
+ if (!bios) {
+ DRM_ERROR("Unable to mmap vram\n");
+ return false;
+ }
+
+ if (size == 0 || bios[0] != 0x55 || bios[1] != 0xaa) {
+ iounmap(bios);
+ DRM_ERROR("bad rom signature\n");
+ return false;
+ }
+ rdev->bios = kmalloc(size, GFP_KERNEL);
+ if (rdev->bios == NULL) {
+ iounmap(bios);
+ DRM_ERROR("kmalloc failed\n");
+ return false;
+ }
+ memcpy(rdev->bios, bios, size);
+ iounmap(bios);
+ return true;
+}
+
static bool radeon_read_bios(struct radeon_device *rdev)
{
uint8_t __iomem *bios;
size_t size;
rdev->bios = NULL;
+ /* XXX: some cards may return 0 for rom size? ddx has a workaround */
bios = pci_map_rom(rdev->pdev, &size);
if (!bios) {
return false;
static bool radeon_read_disabled_bios(struct radeon_device *rdev)
{
- if (rdev->family >= CHIP_RV770)
+ if (rdev->flags & RADEON_IS_IGP)
+ return igp_read_bios_from_vram(rdev);
+ else if (rdev->family >= CHIP_RV770)
return r700_read_disabled_bios(rdev);
else if (rdev->family >= CHIP_R600)
return r600_read_disabled_bios(rdev);
bool r;
uint16_t tmp;
- r = radeon_read_bios(rdev);
+ if (rdev->flags & RADEON_IS_IGP) {
+ r = igp_read_bios_from_vram(rdev);
+ if (r == false)
+ r = radeon_read_bios(rdev);
+ } else
+ r = radeon_read_bios(rdev);
if (r == false) {
r = radeon_read_disabled_bios(rdev);
}
R300_PIXCLK_TRANS_ALWAYS_ONb |
R300_PIXCLK_TVO_ALWAYS_ONb |
R300_P2G2CLK_ALWAYS_ONb |
- R300_P2G2CLK_ALWAYS_ONb);
+ R300_P2G2CLK_DAC_ALWAYS_ONb);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
} else if (rdev->family >= CHIP_RV350) {
tmp = RREG32_PLL(R300_SCLK_CNTL2);
R300_PIXCLK_TRANS_ALWAYS_ONb |
R300_PIXCLK_TVO_ALWAYS_ONb |
R300_P2G2CLK_ALWAYS_ONb |
- R300_P2G2CLK_ALWAYS_ONb);
+ R300_P2G2CLK_DAC_ALWAYS_ONb);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
tmp = RREG32_PLL(RADEON_MCLK_MISC);
R300_PIXCLK_TRANS_ALWAYS_ONb |
R300_PIXCLK_TVO_ALWAYS_ONb |
R300_P2G2CLK_ALWAYS_ONb |
- R300_P2G2CLK_ALWAYS_ONb |
+ R300_P2G2CLK_DAC_ALWAYS_ONb |
R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
} else if (rdev->family >= CHIP_RV350) {
R300_PIXCLK_TRANS_ALWAYS_ONb |
R300_PIXCLK_TVO_ALWAYS_ONb |
R300_P2G2CLK_ALWAYS_ONb |
- R300_P2G2CLK_ALWAYS_ONb |
+ R300_P2G2CLK_DAC_ALWAYS_ONb |
R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
WREG32_PLL(RADEON_PIXCLKS_CNTL, tmp);
} else {
#include "drmP.h"
#include "drm_edid.h"
#include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
#include "radeon_drm.h"
#include "radeon.h"
#include "atom.h"
if (common_modes[i].w < 320 || common_modes[i].h < 200)
continue;
- mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false);
+ mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false, false);
drm_mode_probed_add(connector, mode);
}
}
radeon_add_common_modes(encoder, connector);
else {
/* only 800x600 is supported right now on pre-avivo chips */
- tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false);
+ tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false, false);
tv_mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, tv_mode);
}
return NULL;
}
+static void radeon_dvi_force(struct drm_connector *connector)
+{
+ struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+ if (connector->force == DRM_FORCE_ON)
+ radeon_connector->use_digital = false;
+ if (connector->force == DRM_FORCE_ON_DIGITAL)
+ radeon_connector->use_digital = true;
+}
+
struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = {
.get_modes = radeon_dvi_get_modes,
.mode_valid = radeon_vga_mode_valid,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = radeon_connector_set_property,
.destroy = radeon_connector_destroy,
+ .force = radeon_dvi_force,
};
void
struct radeon_connector *radeon_connector;
struct radeon_connector_atom_dig *radeon_dig_connector;
uint32_t subpixel_order = SubPixelNone;
+ int ret;
/* fixme - tv/cv/din */
if (connector_type == DRM_MODE_CONNECTOR_Unknown)
switch (connector_type) {
case DRM_MODE_CONNECTOR_VGA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
if (!radeon_connector->ddc_bus)
goto failed;
}
+ radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
1);
break;
case DRM_MODE_CONNECTOR_DVIA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
if (!radeon_connector->ddc_bus)
goto failed;
}
+ radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
1);
radeon_dig_connector->igp_lane_info = igp_lane_info;
radeon_connector->con_priv = radeon_dig_connector;
drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
if (!radeon_connector->ddc_bus)
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.coherent_mode_property,
1);
+ radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
1);
radeon_dig_connector->igp_lane_info = igp_lane_info;
radeon_connector->con_priv = radeon_dig_connector;
drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "HDMI");
if (!radeon_connector->ddc_bus)
radeon_dig_connector->igp_lane_info = igp_lane_info;
radeon_connector->con_priv = radeon_dig_connector;
drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
if (!radeon_connector->ddc_bus)
case DRM_MODE_CONNECTOR_9PinDIN:
if (radeon_tv == 1) {
drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+ if (ret)
+ goto failed;
+ radeon_connector->dac_load_detect = true;
+ drm_connector_attach_property(&radeon_connector->base,
+ rdev->mode_info.load_detect_property,
+ 1);
}
- drm_connector_attach_property(&radeon_connector->base,
- rdev->mode_info.load_detect_property,
- 1);
break;
case DRM_MODE_CONNECTOR_LVDS:
radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
radeon_dig_connector->igp_lane_info = igp_lane_info;
radeon_connector->con_priv = radeon_dig_connector;
drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
if (!radeon_connector->ddc_bus)
struct drm_connector *connector;
struct radeon_connector *radeon_connector;
uint32_t subpixel_order = SubPixelNone;
+ int ret;
/* fixme - tv/cv/din */
if (connector_type == DRM_MODE_CONNECTOR_Unknown)
switch (connector_type) {
case DRM_MODE_CONNECTOR_VGA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
if (!radeon_connector->ddc_bus)
goto failed;
}
+ radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
1);
break;
case DRM_MODE_CONNECTOR_DVIA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
if (!radeon_connector->ddc_bus)
goto failed;
}
+ radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
1);
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
if (!radeon_connector->ddc_bus)
goto failed;
+ radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
1);
case DRM_MODE_CONNECTOR_9PinDIN:
if (radeon_tv == 1) {
drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+ if (ret)
+ goto failed;
+ radeon_connector->dac_load_detect = true;
drm_connector_attach_property(&radeon_connector->base,
rdev->mode_info.load_detect_property,
1);
break;
case DRM_MODE_CONNECTOR_LVDS:
drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
- drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+ ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+ if (ret)
+ goto failed;
if (i2c_bus->valid) {
radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
if (!radeon_connector->ddc_bus)
}
p->chunks[i].length_dw = user_chunk.length_dw;
- cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+ p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data;
- size = p->chunks[i].length_dw * sizeof(uint32_t);
- p->chunks[i].kdata = kmalloc(size, GFP_KERNEL);
- if (p->chunks[i].kdata == NULL) {
- return -ENOMEM;
- }
- if (DRM_COPY_FROM_USER(p->chunks[i].kdata, cdata, size)) {
- return -EFAULT;
+ cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+ if (p->chunks[i].chunk_id != RADEON_CHUNK_ID_IB) {
+ size = p->chunks[i].length_dw * sizeof(uint32_t);
+ p->chunks[i].kdata = kmalloc(size, GFP_KERNEL);
+ if (p->chunks[i].kdata == NULL) {
+ return -ENOMEM;
+ }
+ if (DRM_COPY_FROM_USER(p->chunks[i].kdata,
+ p->chunks[i].user_ptr, size)) {
+ return -EFAULT;
+ }
+ } else {
+ p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (p->chunks[i].kpage[0] == NULL || p->chunks[i].kpage[1] == NULL) {
+ kfree(p->chunks[i].kpage[0]);
+ kfree(p->chunks[i].kpage[1]);
+ return -ENOMEM;
+ }
+ p->chunks[i].kpage_idx[0] = -1;
+ p->chunks[i].kpage_idx[1] = -1;
+ p->chunks[i].last_copied_page = -1;
+ p->chunks[i].last_page_index = ((p->chunks[i].length_dw * 4) - 1) / PAGE_SIZE;
}
}
if (p->chunks[p->chunk_ib_idx].length_dw > (16 * 1024)) {
kfree(parser->relocs_ptr);
for (i = 0; i < parser->nchunks; i++) {
kfree(parser->chunks[i].kdata);
+ kfree(parser->chunks[i].kpage[0]);
+ kfree(parser->chunks[i].kpage[1]);
}
kfree(parser->chunks);
kfree(parser->chunks_array);
* uncached). */
ib_chunk = &parser.chunks[parser.chunk_ib_idx];
parser.ib->length_dw = ib_chunk->length_dw;
- memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
r = radeon_cs_parse(&parser);
+ if (r || parser.parser_error) {
+ DRM_ERROR("Invalid command stream !\n");
+ radeon_cs_parser_fini(&parser, r);
+ mutex_unlock(&rdev->cs_mutex);
+ return r;
+ }
+ r = radeon_cs_finish_pages(&parser);
if (r) {
DRM_ERROR("Invalid command stream !\n");
radeon_cs_parser_fini(&parser, r);
mutex_unlock(&rdev->cs_mutex);
return r;
}
+
+int radeon_cs_finish_pages(struct radeon_cs_parser *p)
+{
+ struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+ int i;
+ int size = PAGE_SIZE;
+
+ for (i = ibc->last_copied_page + 1; i <= ibc->last_page_index; i++) {
+ if (i == ibc->last_page_index) {
+ size = (ibc->length_dw * 4) % PAGE_SIZE;
+ if (size == 0)
+ size = PAGE_SIZE;
+ }
+
+ if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)),
+ ibc->user_ptr + (i * PAGE_SIZE),
+ size))
+ return -EFAULT;
+ }
+ return 0;
+}
+
+int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx)
+{
+ int new_page;
+ struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+ int i;
+ int size = PAGE_SIZE;
+
+ for (i = ibc->last_copied_page + 1; i < pg_idx; i++) {
+ if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)),
+ ibc->user_ptr + (i * PAGE_SIZE),
+ PAGE_SIZE)) {
+ p->parser_error = -EFAULT;
+ return 0;
+ }
+ }
+
+ new_page = ibc->kpage_idx[0] < ibc->kpage_idx[1] ? 0 : 1;
+
+ if (pg_idx == ibc->last_page_index) {
+ size = (ibc->length_dw * 4) % PAGE_SIZE;
+ if (size == 0)
+ size = PAGE_SIZE;
+ }
+
+ if (DRM_COPY_FROM_USER(ibc->kpage[new_page],
+ ibc->user_ptr + (pg_idx * PAGE_SIZE),
+ size)) {
+ p->parser_error = -EFAULT;
+ return 0;
+ }
+
+ /* copy to IB here */
+ memcpy((void *)(p->ib->ptr+(pg_idx*(PAGE_SIZE/4))), ibc->kpage[new_page], size);
+
+ ibc->last_copied_page = pg_idx;
+ ibc->kpage_idx[new_page] = pg_idx;
+
+ return new_page;
+}
case CHIP_RV380:
rdev->asic = &r300_asic;
if (rdev->flags & RADEON_IS_PCIE) {
- rdev->asic->gart_init = &rv370_pcie_gart_init;
- rdev->asic->gart_fini = &rv370_pcie_gart_fini;
- rdev->asic->gart_enable = &rv370_pcie_gart_enable;
- rdev->asic->gart_disable = &rv370_pcie_gart_disable;
rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
}
static unsigned int radeon_vga_set_decode(void *cookie, bool state)
{
struct radeon_device *rdev = cookie;
-
radeon_vga_set_state(rdev, state);
if (state)
return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
else
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
}
+
+void radeon_agp_disable(struct radeon_device *rdev)
+{
+ rdev->flags &= ~RADEON_IS_AGP;
+ if (rdev->family >= CHIP_R600) {
+ DRM_INFO("Forcing AGP to PCIE mode\n");
+ rdev->flags |= RADEON_IS_PCIE;
+ } else if (rdev->family >= CHIP_RV515 ||
+ rdev->family == CHIP_RV380 ||
+ rdev->family == CHIP_RV410 ||
+ rdev->family == CHIP_R423) {
+ DRM_INFO("Forcing AGP to PCIE mode\n");
+ rdev->flags |= RADEON_IS_PCIE;
+ rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
+ rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
+ } else {
+ DRM_INFO("Forcing AGP to PCI mode\n");
+ rdev->flags |= RADEON_IS_PCI;
+ rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
+ rdev->asic->gart_set_page = &r100_pci_gart_set_page;
+ }
+}
+
/*
* Radeon device.
*/
}
if (radeon_agpmode == -1) {
- rdev->flags &= ~RADEON_IS_AGP;
- if (rdev->family >= CHIP_RV515 ||
- rdev->family == CHIP_RV380 ||
- rdev->family == CHIP_RV410 ||
- rdev->family == CHIP_R423) {
- DRM_INFO("Forcing AGP to PCIE mode\n");
- rdev->flags |= RADEON_IS_PCIE;
- rdev->asic->gart_init = &rv370_pcie_gart_init;
- rdev->asic->gart_fini = &rv370_pcie_gart_fini;
- rdev->asic->gart_enable = &rv370_pcie_gart_enable;
- rdev->asic->gart_disable = &rv370_pcie_gart_disable;
- rdev->asic->gart_tlb_flush = &rv370_pcie_gart_tlb_flush;
- rdev->asic->gart_set_page = &rv370_pcie_gart_set_page;
- } else {
- DRM_INFO("Forcing AGP to PCI mode\n");
- rdev->flags |= RADEON_IS_PCI;
- rdev->asic->gart_init = &r100_pci_gart_init;
- rdev->asic->gart_fini = &r100_pci_gart_fini;
- rdev->asic->gart_enable = &r100_pci_gart_enable;
- rdev->asic->gart_disable = &r100_pci_gart_disable;
- rdev->asic->gart_tlb_flush = &r100_pci_gart_tlb_flush;
- rdev->asic->gart_set_page = &r100_pci_gart_set_page;
- }
+ radeon_agp_disable(rdev);
}
/* set DMA mask + need_dma32 flags.
DRM_INFO("register mmio base: 0x%08X\n", (uint32_t)rdev->rmmio_base);
DRM_INFO("register mmio size: %u\n", (unsigned)rdev->rmmio_size);
- rdev->new_init_path = false;
- r = radeon_init(rdev);
- if (r) {
- return r;
- }
-
/* if we have > 1 VGA cards, then disable the radeon VGA resources */
- r = vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode);
- if (r) {
- return -EINVAL;
- }
-
- if (!rdev->new_init_path) {
- /* Setup errata flags */
- radeon_errata(rdev);
- /* Initialize scratch registers */
- radeon_scratch_init(rdev);
- /* Initialize surface registers */
- radeon_surface_init(rdev);
+ /* this will fail for cards that aren't VGA class devices, just
+ * ignore it */
+ vga_client_register(rdev->pdev, rdev, NULL, radeon_vga_set_decode);
- /* BIOS*/
- if (!radeon_get_bios(rdev)) {
- if (ASIC_IS_AVIVO(rdev))
- return -EINVAL;
- }
- if (rdev->is_atom_bios) {
- r = radeon_atombios_init(rdev);
- if (r) {
- return r;
- }
- } else {
- r = radeon_combios_init(rdev);
- if (r) {
- return r;
- }
- }
- /* Reset gpu before posting otherwise ATOM will enter infinite loop */
- if (radeon_gpu_reset(rdev)) {
- /* FIXME: what do we want to do here ? */
- }
- /* check if cards are posted or not */
- if (!radeon_card_posted(rdev) && rdev->bios) {
- DRM_INFO("GPU not posted. posting now...\n");
- if (rdev->is_atom_bios) {
- atom_asic_init(rdev->mode_info.atom_context);
- } else {
- radeon_combios_asic_init(rdev->ddev);
- }
- }
- /* Get clock & vram information */
- radeon_get_clock_info(rdev->ddev);
- radeon_vram_info(rdev);
- /* Initialize clocks */
- r = radeon_clocks_init(rdev);
- if (r) {
- return r;
- }
+ r = radeon_init(rdev);
+ if (r)
+ return r;
- /* Initialize memory controller (also test AGP) */
- r = radeon_mc_init(rdev);
- if (r) {
- return r;
- }
- /* Fence driver */
- r = radeon_fence_driver_init(rdev);
- if (r) {
- return r;
- }
- r = radeon_irq_kms_init(rdev);
- if (r) {
- return r;
- }
- /* Memory manager */
- r = radeon_object_init(rdev);
- if (r) {
- return r;
- }
- r = radeon_gpu_gart_init(rdev);
+ if (rdev->flags & RADEON_IS_AGP && !rdev->accel_working) {
+ /* Acceleration not working on AGP card try again
+ * with fallback to PCI or PCIE GART
+ */
+ radeon_gpu_reset(rdev);
+ radeon_fini(rdev);
+ radeon_agp_disable(rdev);
+ r = radeon_init(rdev);
if (r)
return r;
- /* Initialize GART (initialize after TTM so we can allocate
- * memory through TTM but finalize after TTM) */
- r = radeon_gart_enable(rdev);
- if (r)
- return 0;
- r = radeon_gem_init(rdev);
- if (r)
- return 0;
-
- /* 1M ring buffer */
- r = radeon_cp_init(rdev, 1024 * 1024);
- if (r)
- return 0;
- r = radeon_wb_init(rdev);
- if (r)
- DRM_ERROR("radeon: failled initializing WB (%d).\n", r);
- r = radeon_ib_pool_init(rdev);
- if (r)
- return 0;
- r = radeon_ib_test(rdev);
- if (r)
- return 0;
- rdev->accel_working = true;
}
- DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
if (radeon_testing) {
radeon_test_moves(rdev);
}
{
DRM_INFO("radeon: finishing device.\n");
rdev->shutdown = true;
- /* Order matter so becarefull if you rearrange anythings */
- if (!rdev->new_init_path) {
- radeon_ib_pool_fini(rdev);
- radeon_cp_fini(rdev);
- radeon_wb_fini(rdev);
- radeon_gpu_gart_fini(rdev);
- radeon_gem_fini(rdev);
- radeon_mc_fini(rdev);
-#if __OS_HAS_AGP
- radeon_agp_fini(rdev);
-#endif
- radeon_irq_kms_fini(rdev);
- vga_client_register(rdev->pdev, NULL, NULL, NULL);
- radeon_fence_driver_fini(rdev);
- radeon_clocks_fini(rdev);
- radeon_object_fini(rdev);
- if (rdev->is_atom_bios) {
- radeon_atombios_fini(rdev);
- } else {
- radeon_combios_fini(rdev);
- }
- kfree(rdev->bios);
- rdev->bios = NULL;
- } else {
- radeon_fini(rdev);
- }
+ radeon_fini(rdev);
+ vga_client_register(rdev->pdev, NULL, NULL, NULL);
iounmap(rdev->rmmio);
rdev->rmmio = NULL;
}
radeon_save_bios_scratch_regs(rdev);
- if (!rdev->new_init_path) {
- radeon_cp_disable(rdev);
- radeon_gart_disable(rdev);
- rdev->irq.sw_int = false;
- radeon_irq_set(rdev);
- } else {
- radeon_suspend(rdev);
- }
+ radeon_suspend(rdev);
/* evict remaining vram memory */
radeon_object_evict_vram(rdev);
int radeon_resume_kms(struct drm_device *dev)
{
struct radeon_device *rdev = dev->dev_private;
- int r;
acquire_console_sem();
pci_set_power_state(dev->pdev, PCI_D0);
return -1;
}
pci_set_master(dev->pdev);
- /* Reset gpu before posting otherwise ATOM will enter infinite loop */
- if (!rdev->new_init_path) {
- if (radeon_gpu_reset(rdev)) {
- /* FIXME: what do we want to do here ? */
- }
- /* post card */
- if (rdev->is_atom_bios) {
- atom_asic_init(rdev->mode_info.atom_context);
- } else {
- radeon_combios_asic_init(rdev->ddev);
- }
- /* Initialize clocks */
- r = radeon_clocks_init(rdev);
- if (r) {
- release_console_sem();
- return r;
- }
- /* Enable IRQ */
- rdev->irq.sw_int = true;
- radeon_irq_set(rdev);
- /* Initialize GPU Memory Controller */
- r = radeon_mc_init(rdev);
- if (r) {
- goto out;
- }
- r = radeon_gart_enable(rdev);
- if (r) {
- goto out;
- }
- r = radeon_cp_init(rdev, rdev->cp.ring_size);
- if (r) {
- goto out;
- }
- } else {
- radeon_resume(rdev);
- }
-out:
+ radeon_resume(rdev);
radeon_restore_bios_scratch_regs(rdev);
fb_set_suspend(rdev->fbdev_info, 0);
release_console_sem();
legacy_crtc_load_lut(crtc);
}
-/** Sets the color ramps on behalf of RandR */
+/** Sets the color ramps on behalf of fbcon */
void radeon_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
- if (regno == 0)
- DRM_DEBUG("gamma set %d\n", radeon_crtc->crtc_id);
radeon_crtc->lut_r[regno] = red >> 6;
radeon_crtc->lut_g[regno] = green >> 6;
radeon_crtc->lut_b[regno] = blue >> 6;
}
+/** Gets the color ramps on behalf of fbcon */
+void radeon_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno)
+{
+ struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+
+ *red = radeon_crtc->lut_r[regno] << 6;
+ *green = radeon_crtc->lut_g[regno] << 6;
+ *blue = radeon_crtc->lut_b[regno] << 6;
+}
+
static void radeon_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, uint32_t size)
{
struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
- int i, j;
+ int i;
if (size != 256) {
return;
return;
}
- if (crtc->fb->depth == 16) {
- for (i = 0; i < 64; i++) {
- if (i <= 31) {
- for (j = 0; j < 8; j++) {
- radeon_crtc->lut_r[i * 8 + j] = red[i] >> 6;
- radeon_crtc->lut_b[i * 8 + j] = blue[i] >> 6;
- }
- }
- for (j = 0; j < 4; j++)
- radeon_crtc->lut_g[i * 4 + j] = green[i] >> 6;
- }
- } else {
- for (i = 0; i < 256; i++) {
- radeon_crtc->lut_r[i] = red[i] >> 6;
- radeon_crtc->lut_g[i] = green[i] >> 6;
- radeon_crtc->lut_b[i] = blue[i] >> 6;
- }
+ /* userspace palettes are always correct as is */
+ for (i = 0; i < 256; i++) {
+ radeon_crtc->lut_r[i] = red[i] >> 6;
+ radeon_crtc->lut_g[i] = green[i] >> 6;
+ radeon_crtc->lut_b[i] = blue[i] >> 6;
}
radeon_crtc_load_lut(crtc);
if (ret) {
return ret;
}
- /* allocate crtcs - TODO single crtc */
+
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ num_crtc = 1;
+
+ /* allocate crtcs */
for (i = 0; i < num_crtc; i++) {
radeon_crtc_init(rdev->ddev, i);
}
int radeon_driver_irq_postinstall_kms(struct drm_device *dev);
void radeon_driver_irq_uninstall_kms(struct drm_device *dev);
irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS);
-int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master);
-void radeon_master_destroy_kms(struct drm_device *dev,
- struct drm_master *master);
int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
struct drm_file *file_priv);
int radeon_gem_object_init(struct drm_gem_object *obj);
.get_vblank_counter = radeon_get_vblank_counter_kms,
.enable_vblank = radeon_enable_vblank_kms,
.disable_vblank = radeon_disable_vblank_kms,
- .master_create = radeon_master_create_kms,
- .master_destroy = radeon_master_destroy_kms,
#if defined(CONFIG_DEBUG_FS)
.debugfs_init = radeon_debugfs_init,
.debugfs_cleanup = radeon_debugfs_cleanup,
#include <linux/firmware.h>
#include <linux/platform_device.h>
+#include "radeon_family.h"
+
/* General customization:
*/
#define DRIVER_MINOR 31
#define DRIVER_PATCHLEVEL 0
-/*
- * Radeon chip families
- */
-enum radeon_family {
- CHIP_R100,
- CHIP_RV100,
- CHIP_RS100,
- CHIP_RV200,
- CHIP_RS200,
- CHIP_R200,
- CHIP_RV250,
- CHIP_RS300,
- CHIP_RV280,
- CHIP_R300,
- CHIP_R350,
- CHIP_RV350,
- CHIP_RV380,
- CHIP_R420,
- CHIP_R423,
- CHIP_RV410,
- CHIP_RS400,
- CHIP_RS480,
- CHIP_RS600,
- CHIP_RS690,
- CHIP_RS740,
- CHIP_RV515,
- CHIP_R520,
- CHIP_RV530,
- CHIP_RV560,
- CHIP_RV570,
- CHIP_R580,
- CHIP_R600,
- CHIP_RV610,
- CHIP_RV630,
- CHIP_RV620,
- CHIP_RV635,
- CHIP_RV670,
- CHIP_RS780,
- CHIP_RS880,
- CHIP_RV770,
- CHIP_RV730,
- CHIP_RV710,
- CHIP_RV740,
- CHIP_LAST,
-};
-
enum radeon_cp_microcode_version {
UCODE_R100,
UCODE_R200,
UCODE_R300,
};
-/*
- * Chip flags
- */
-enum radeon_chip_flags {
- RADEON_FAMILY_MASK = 0x0000ffffUL,
- RADEON_FLAGS_MASK = 0xffff0000UL,
- RADEON_IS_MOBILITY = 0x00010000UL,
- RADEON_IS_IGP = 0x00020000UL,
- RADEON_SINGLE_CRTC = 0x00040000UL,
- RADEON_IS_AGP = 0x00080000UL,
- RADEON_HAS_HIERZ = 0x00100000UL,
- RADEON_IS_PCIE = 0x00200000UL,
- RADEON_NEW_MEMMAP = 0x00400000UL,
- RADEON_IS_PCI = 0x00800000UL,
- RADEON_IS_IGPGART = 0x01000000UL,
-};
-
typedef struct drm_radeon_freelist {
unsigned int age;
struct drm_buf *buf;
void
radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t supported_device)
{
+ struct radeon_device *rdev = dev->dev_private;
struct drm_encoder *encoder;
struct radeon_encoder *radeon_encoder;
return;
encoder = &radeon_encoder->base;
- encoder->possible_crtcs = 0x3;
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ encoder->possible_crtcs = 0x1;
+ else
+ encoder->possible_crtcs = 0x3;
encoder->possible_clones = 0;
radeon_encoder->enc_priv = NULL;
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+
+/* this file defines the CHIP_ and family flags used in the pciids,
+ * its is common between kms and non-kms because duplicating it and
+ * changing one place is fail.
+ */
+#ifndef RADEON_FAMILY_H
+#define RADEON_FAMILY_H
+/*
+ * Radeon chip families
+ */
+enum radeon_family {
+ CHIP_R100,
+ CHIP_RV100,
+ CHIP_RS100,
+ CHIP_RV200,
+ CHIP_RS200,
+ CHIP_R200,
+ CHIP_RV250,
+ CHIP_RS300,
+ CHIP_RV280,
+ CHIP_R300,
+ CHIP_R350,
+ CHIP_RV350,
+ CHIP_RV380,
+ CHIP_R420,
+ CHIP_R423,
+ CHIP_RV410,
+ CHIP_RS400,
+ CHIP_RS480,
+ CHIP_RS600,
+ CHIP_RS690,
+ CHIP_RS740,
+ CHIP_RV515,
+ CHIP_R520,
+ CHIP_RV530,
+ CHIP_RV560,
+ CHIP_RV570,
+ CHIP_R580,
+ CHIP_R600,
+ CHIP_RV610,
+ CHIP_RV630,
+ CHIP_RV670,
+ CHIP_RV620,
+ CHIP_RV635,
+ CHIP_RS780,
+ CHIP_RS880,
+ CHIP_RV770,
+ CHIP_RV730,
+ CHIP_RV710,
+ CHIP_RV740,
+ CHIP_LAST,
+};
+
+/*
+ * Chip flags
+ */
+enum radeon_chip_flags {
+ RADEON_FAMILY_MASK = 0x0000ffffUL,
+ RADEON_FLAGS_MASK = 0xffff0000UL,
+ RADEON_IS_MOBILITY = 0x00010000UL,
+ RADEON_IS_IGP = 0x00020000UL,
+ RADEON_SINGLE_CRTC = 0x00040000UL,
+ RADEON_IS_AGP = 0x00080000UL,
+ RADEON_HAS_HIERZ = 0x00100000UL,
+ RADEON_IS_PCIE = 0x00200000UL,
+ RADEON_NEW_MEMMAP = 0x00400000UL,
+ RADEON_IS_PCI = 0x00800000UL,
+ RADEON_IS_IGPGART = 0x01000000UL,
+};
+#endif
.fb_imageblit = cfb_imageblit,
.fb_pan_display = drm_fb_helper_pan_display,
.fb_blank = drm_fb_helper_blank,
+ .fb_setcmap = drm_fb_helper_setcmap,
};
/**
static struct drm_fb_helper_funcs radeon_fb_helper_funcs = {
.gamma_set = radeon_crtc_fb_gamma_set,
+ .gamma_get = radeon_crtc_fb_gamma_get,
};
int radeonfb_create(struct drm_device *dev,
uint32_t fb_width, uint32_t fb_height,
uint32_t surface_width, uint32_t surface_height,
+ uint32_t surface_depth, uint32_t surface_bpp,
struct drm_framebuffer **fb_p)
{
struct radeon_device *rdev = dev->dev_private;
unsigned long tmp;
bool fb_tiled = false; /* useful for testing */
u32 tiling_flags = 0;
+ int crtc_count;
mode_cmd.width = surface_width;
mode_cmd.height = surface_height;
- mode_cmd.bpp = 32;
+
+ /* avivo can't scanout real 24bpp */
+ if ((surface_bpp == 24) && ASIC_IS_AVIVO(rdev))
+ surface_bpp = 32;
+
+ mode_cmd.bpp = surface_bpp;
/* need to align pitch with crtc limits */
mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
- mode_cmd.depth = 24;
+ mode_cmd.depth = surface_depth;
size = mode_cmd.pitch * mode_cmd.height;
aligned_size = ALIGN(size, PAGE_SIZE);
rfbdev = info->par;
rfbdev->helper.funcs = &radeon_fb_helper_funcs;
rfbdev->helper.dev = dev;
- ret = drm_fb_helper_init_crtc_count(&rfbdev->helper, 2,
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ crtc_count = 1;
+ else
+ crtc_count = 2;
+ ret = drm_fb_helper_init_crtc_count(&rfbdev->helper, crtc_count,
RADEONFB_CONN_LIMIT);
if (ret)
goto out_unref;
strcpy(info->fix.id, "radeondrmfb");
- drm_fb_helper_fill_fix(info, fb->pitch);
+ drm_fb_helper_fill_fix(info, fb->pitch, fb->depth);
info->flags = FBINFO_DEFAULT;
info->fbops = &radeonfb_ops;
return ret;
}
+static char *mode_option;
+int radeon_parse_options(char *options)
+{
+ char *this_opt;
+
+ if (!options || !*options)
+ return 0;
+
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!*this_opt)
+ continue;
+ mode_option = this_opt;
+ }
+ return 0;
+}
+
int radeonfb_probe(struct drm_device *dev)
{
- int ret;
- ret = drm_fb_helper_single_fb_probe(dev, &radeonfb_create);
- return ret;
+ return drm_fb_helper_single_fb_probe(dev, 32, &radeonfb_create);
}
-EXPORT_SYMBOL(radeonfb_probe);
int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb)
{
int radeon_irq_kms_init(struct radeon_device *rdev)
{
int r = 0;
+ int num_crtc = 2;
- r = drm_vblank_init(rdev->ddev, 2);
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ num_crtc = 1;
+
+ r = drm_vblank_init(rdev->ddev, num_crtc);
if (r) {
return r;
}
}
-/*
- * For multiple master (like multiple X).
- */
-struct drm_radeon_master_private {
- drm_local_map_t *sarea;
- drm_radeon_sarea_t *sarea_priv;
-};
-
-int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master)
-{
- struct drm_radeon_master_private *master_priv;
- unsigned long sareapage;
- int ret;
-
- master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
- if (master_priv == NULL) {
- return -ENOMEM;
- }
- /* prebuild the SAREA */
- sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE);
- ret = drm_addmap(dev, 0, sareapage, _DRM_SHM,
- _DRM_CONTAINS_LOCK,
- &master_priv->sarea);
- if (ret) {
- DRM_ERROR("SAREA setup failed\n");
- return ret;
- }
- master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea);
- master_priv->sarea_priv->pfCurrentPage = 0;
- master->driver_priv = master_priv;
- return 0;
-}
-
-void radeon_master_destroy_kms(struct drm_device *dev,
- struct drm_master *master)
-{
- struct drm_radeon_master_private *master_priv = master->driver_priv;
-
- if (master_priv == NULL) {
- return;
- }
- if (master_priv->sarea) {
- drm_rmmap_locked(dev, master_priv->sarea);
- }
- kfree(master_priv);
- master->driver_priv = NULL;
-}
-
-
/*
* IOCTL.
*/
.mode_set_base = radeon_crtc_set_base,
.prepare = radeon_crtc_prepare,
.commit = radeon_crtc_commit,
+ .load_lut = radeon_crtc_load_lut,
};
R420_TV_DAC_DACADJ_MASK |
R420_TV_DAC_RDACPD |
R420_TV_DAC_GDACPD |
- R420_TV_DAC_GDACPD |
+ R420_TV_DAC_BDACPD |
R420_TV_DAC_TVENABLE);
} else {
tv_dac_cntl &= ~(RADEON_TV_DAC_STD_MASK |
RADEON_TV_DAC_DACADJ_MASK |
RADEON_TV_DAC_RDACPD |
RADEON_TV_DAC_GDACPD |
- RADEON_TV_DAC_GDACPD);
+ RADEON_TV_DAC_BDACPD);
}
/* FIXME TV */
return;
encoder = &radeon_encoder->base;
- encoder->possible_crtcs = 0x3;
+ if (rdev->flags & RADEON_SINGLE_CRTC)
+ encoder->possible_crtcs = 0x1;
+ else
+ encoder->possible_crtcs = 0x3;
encoder->possible_clones = 0;
radeon_encoder->enc_priv = NULL;
radeon_combios_encoder_dpms_scratch_regs(struct drm_encoder *encoder, bool on);
extern void radeon_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
+extern void radeon_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno);
struct drm_framebuffer *radeon_framebuffer_create(struct drm_device *dev,
struct drm_mode_fb_cmd *mode_cmd,
struct drm_gem_object *obj);
int radeon_object_list_reserve(struct list_head *head)
{
struct radeon_object_list *lobj;
- struct list_head *i;
int r;
- list_for_each(i, head) {
- lobj = list_entry(i, struct radeon_object_list, list);
+ list_for_each_entry(lobj, head, list){
if (!lobj->robj->pin_count) {
r = radeon_object_reserve(lobj->robj, true);
if (unlikely(r != 0)) {
void radeon_object_list_unreserve(struct list_head *head)
{
struct radeon_object_list *lobj;
- struct list_head *i;
- list_for_each(i, head) {
- lobj = list_entry(i, struct radeon_object_list, list);
+ list_for_each_entry(lobj, head, list) {
if (!lobj->robj->pin_count) {
radeon_object_unreserve(lobj->robj);
- } else {
}
}
}
struct radeon_object_list *lobj;
struct radeon_object *robj;
struct radeon_fence *old_fence = NULL;
- struct list_head *i;
int r;
r = radeon_object_list_reserve(head);
radeon_object_list_unreserve(head);
return r;
}
- list_for_each(i, head) {
- lobj = list_entry(i, struct radeon_object_list, list);
+ list_for_each_entry(lobj, head, list) {
robj = lobj->robj;
if (!robj->pin_count) {
if (lobj->wdomain) {
{
struct radeon_object_list *lobj;
struct radeon_fence *old_fence = NULL;
- struct list_head *i;
- list_for_each(i, head) {
- lobj = list_entry(i, struct radeon_object_list, list);
+ list_for_each_entry(lobj, head, list) {
old_fence = (struct radeon_fence *)lobj->robj->tobj.sync_obj;
lobj->robj->tobj.sync_obj = NULL;
if (old_fence) {
# define RADEON_CP_PACKET_MAX_DWORDS (1 << 12)
# define RADEON_CP_PACKET0_REG_MASK 0x000007ff
# define R300_CP_PACKET0_REG_MASK 0x00001fff
+# define R600_CP_PACKET0_REG_MASK 0x0000ffff
# define RADEON_CP_PACKET1_REG0_MASK 0x000007ff
# define RADEON_CP_PACKET1_REG1_MASK 0x003ff800
}
static struct vm_operations_struct radeon_ttm_vm_ops;
-static struct vm_operations_struct *ttm_vm_ops = NULL;
+static const struct vm_operations_struct *ttm_vm_ops = NULL;
static int radeon_ttm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
{
#define RADEON_DEBUGFS_MEM_TYPES 2
-static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES];
-static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32];
-
#if defined(CONFIG_DEBUG_FS)
static int radeon_mm_dump_table(struct seq_file *m, void *data)
{
static int radeon_ttm_debugfs_init(struct radeon_device *rdev)
{
+#if defined(CONFIG_DEBUG_FS)
+ static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES];
+ static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32];
unsigned i;
-#if defined(CONFIG_DEBUG_FS)
for (i = 0; i < RADEON_DEBUGFS_MEM_TYPES; i++) {
if (i == 0)
sprintf(radeon_mem_types_names[i], "radeon_vram_mm");
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RS100D_H__
+#define __RS100D_H__
+
+/* Registers */
+#define R_00015C_NB_TOM 0x00015C
+#define S_00015C_MC_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_00015C_MC_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_00015C_MC_FB_START 0xFFFF0000
+#define S_00015C_MC_FB_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_00015C_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_00015C_MC_FB_TOP 0x0000FFFF
+
+#endif
*/
#include <linux/seq_file.h>
#include <drm/drmP.h>
-#include "radeon_reg.h"
#include "radeon.h"
+#include "rs400d.h"
-/* rs400,rs480 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-void r100_mc_disable_clients(struct radeon_device *rdev);
-int r300_mc_wait_for_idle(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
+/* This files gather functions specifics to : rs400,rs480 */
+static int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
-/* This files gather functions specifics to :
- * rs400,rs480
- *
- * Some of these functions might be used by newer ASICs.
- */
-void rs400_gpu_init(struct radeon_device *rdev);
-int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev);
-
-
-/*
- * GART functions.
- */
void rs400_gart_adjust_size(struct radeon_device *rdev)
{
/* Check gart size */
return 0;
}
-
-/*
- * MC functions.
- */
-int rs400_mc_init(struct radeon_device *rdev)
-{
- uint32_t tmp;
- int r;
-
- if (r100_debugfs_rbbm_init(rdev)) {
- DRM_ERROR("Failed to register debugfs file for RBBM !\n");
- }
-
- rs400_gpu_init(rdev);
- rs400_gart_disable(rdev);
- rdev->mc.gtt_location = rdev->mc.mc_vram_size;
- rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
- rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
- r = radeon_mc_setup(rdev);
- if (r) {
- return r;
- }
-
- r100_mc_disable_clients(rdev);
- if (r300_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
- }
-
- tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
- tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
- tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32(RADEON_MC_FB_LOCATION, tmp);
- tmp = RREG32(RADEON_HOST_PATH_CNTL) | RADEON_HP_LIN_RD_CACHE_DIS;
- WREG32(RADEON_HOST_PATH_CNTL, tmp | RADEON_HDP_SOFT_RESET | RADEON_HDP_READ_BUFFER_INVALIDATE);
- (void)RREG32(RADEON_HOST_PATH_CNTL);
- WREG32(RADEON_HOST_PATH_CNTL, tmp);
- (void)RREG32(RADEON_HOST_PATH_CNTL);
-
- return 0;
-}
-
-void rs400_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
-void rs400_errata(struct radeon_device *rdev)
-{
- rdev->pll_errata = 0;
-}
-
void rs400_gpu_init(struct radeon_device *rdev)
{
/* FIXME: HDP same place on rs400 ? */
}
}
-
-/*
- * VRAM info.
- */
void rs400_vram_info(struct radeon_device *rdev)
{
rs400_gart_adjust_size(rdev);
r100_vram_init_sizes(rdev);
}
-
-/*
- * Indirect registers accessor
- */
uint32_t rs400_mc_rreg(struct radeon_device *rdev, uint32_t reg)
{
uint32_t r;
WREG32(RS480_NB_MC_INDEX, 0xff);
}
-
-/*
- * Debugfs info
- */
#if defined(CONFIG_DEBUG_FS)
static int rs400_debugfs_gart_info(struct seq_file *m, void *data)
{
};
#endif
-int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
+static int rs400_debugfs_pcie_gart_info_init(struct radeon_device *rdev)
{
#if defined(CONFIG_DEBUG_FS)
return radeon_debugfs_add_files(rdev, rs400_gart_info_list, 1);
return 0;
#endif
}
+
+static int rs400_mc_init(struct radeon_device *rdev)
+{
+ int r;
+ u32 tmp;
+
+ /* Setup GPU memory space */
+ tmp = G_00015C_MC_FB_START(RREG32(R_00015C_NB_TOM));
+ rdev->mc.vram_location = G_00015C_MC_FB_START(tmp) << 16;
+ rdev->mc.gtt_location = 0xFFFFFFFFUL;
+ r = radeon_mc_setup(rdev);
+ if (r)
+ return r;
+ return 0;
+}
+
+void rs400_mc_program(struct radeon_device *rdev)
+{
+ struct r100_mc_save save;
+
+ /* Stops all mc clients */
+ r100_mc_stop(rdev, &save);
+
+ /* Wait for mc idle */
+ if (r300_mc_wait_for_idle(rdev))
+ dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+ WREG32(R_000148_MC_FB_LOCATION,
+ S_000148_MC_FB_START(rdev->mc.vram_start >> 16) |
+ S_000148_MC_FB_TOP(rdev->mc.vram_end >> 16));
+
+ r100_mc_resume(rdev, &save);
+}
+
+static int rs400_startup(struct radeon_device *rdev)
+{
+ int r;
+
+ rs400_mc_program(rdev);
+ /* Resume clock */
+ r300_clock_startup(rdev);
+ /* Initialize GPU configuration (# pipes, ...) */
+ rs400_gpu_init(rdev);
+ /* Initialize GART (initialize after TTM so we can allocate
+ * memory through TTM but finalize after TTM) */
+ r = rs400_gart_enable(rdev);
+ if (r)
+ return r;
+ /* Enable IRQ */
+ rdev->irq.sw_int = true;
+ r100_irq_set(rdev);
+ /* 1M ring buffer */
+ r = r100_cp_init(rdev, 1024 * 1024);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+ return r;
+ }
+ r = r100_wb_init(rdev);
+ if (r)
+ dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+ r = r100_ib_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+ return r;
+ }
+ return 0;
+}
+
+int rs400_resume(struct radeon_device *rdev)
+{
+ /* Make sur GART are not working */
+ rs400_gart_disable(rdev);
+ /* Resume clock before doing reset */
+ r300_clock_startup(rdev);
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* post */
+ radeon_combios_asic_init(rdev->ddev);
+ /* Resume clock after posting */
+ r300_clock_startup(rdev);
+ return rs400_startup(rdev);
+}
+
+int rs400_suspend(struct radeon_device *rdev)
+{
+ r100_cp_disable(rdev);
+ r100_wb_disable(rdev);
+ r100_irq_disable(rdev);
+ rs400_gart_disable(rdev);
+ return 0;
+}
+
+void rs400_fini(struct radeon_device *rdev)
+{
+ rs400_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ radeon_gem_fini(rdev);
+ rs400_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ radeon_fence_driver_fini(rdev);
+ radeon_object_fini(rdev);
+ radeon_atombios_fini(rdev);
+ kfree(rdev->bios);
+ rdev->bios = NULL;
+}
+
+int rs400_init(struct radeon_device *rdev)
+{
+ int r;
+
+ /* Disable VGA */
+ r100_vga_render_disable(rdev);
+ /* Initialize scratch registers */
+ radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
+ /* TODO: disable VGA need to use VGA request */
+ /* BIOS*/
+ if (!radeon_get_bios(rdev)) {
+ if (ASIC_IS_AVIVO(rdev))
+ return -EINVAL;
+ }
+ if (rdev->is_atom_bios) {
+ dev_err(rdev->dev, "Expecting combios for RS400/RS480 GPU\n");
+ return -EINVAL;
+ } else {
+ r = radeon_combios_init(rdev);
+ if (r)
+ return r;
+ }
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev,
+ "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* check if cards are posted or not */
+ if (!radeon_card_posted(rdev) && rdev->bios) {
+ DRM_INFO("GPU not posted. posting now...\n");
+ radeon_combios_asic_init(rdev->ddev);
+ }
+ /* Initialize clocks */
+ radeon_get_clock_info(rdev->ddev);
+ /* Get vram informations */
+ rs400_vram_info(rdev);
+ /* Initialize memory controller (also test AGP) */
+ r = rs400_mc_init(rdev);
+ if (r)
+ return r;
+ /* Fence driver */
+ r = radeon_fence_driver_init(rdev);
+ if (r)
+ return r;
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ /* Memory manager */
+ r = radeon_object_init(rdev);
+ if (r)
+ return r;
+ r = rs400_gart_init(rdev);
+ if (r)
+ return r;
+ r300_set_reg_safe(rdev);
+ rdev->accel_working = true;
+ r = rs400_startup(rdev);
+ if (r) {
+ /* Somethings want wront with the accel init stop accel */
+ dev_err(rdev->dev, "Disabling GPU acceleration\n");
+ rs400_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ rs400_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ rdev->accel_working = false;
+ }
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RS400D_H__
+#define __RS400D_H__
+
+/* Registers */
+#define R_000148_MC_FB_LOCATION 0x000148
+#define S_000148_MC_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000148_MC_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000148_MC_FB_START 0xFFFF0000
+#define S_000148_MC_FB_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000148_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000148_MC_FB_TOP 0x0000FFFF
+#define R_00015C_NB_TOM 0x00015C
+#define S_00015C_MC_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_00015C_MC_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_00015C_MC_FB_START 0xFFFF0000
+#define S_00015C_MC_FB_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_00015C_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_00015C_MC_FB_TOP 0x0000FFFF
+#define R_0007C0_CP_STAT 0x0007C0
+#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0)
+#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1)
+#define C_0007C0_MRU_BUSY 0xFFFFFFFE
+#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1)
+#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1)
+#define C_0007C0_MWU_BUSY 0xFFFFFFFD
+#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2)
+#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1)
+#define C_0007C0_RSIU_BUSY 0xFFFFFFFB
+#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3)
+#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1)
+#define C_0007C0_RCIU_BUSY 0xFFFFFFF7
+#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9)
+#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1)
+#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF
+#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10)
+#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1)
+#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF
+#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11)
+#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1)
+#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF
+#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12)
+#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1)
+#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF
+#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13)
+#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1)
+#define C_0007C0_CSI_BUSY 0xFFFFDFFF
+#define S_0007C0_CSF_INDIRECT2_BUSY(x) (((x) & 0x1) << 14)
+#define G_0007C0_CSF_INDIRECT2_BUSY(x) (((x) >> 14) & 0x1)
+#define C_0007C0_CSF_INDIRECT2_BUSY 0xFFFFBFFF
+#define S_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) & 0x1) << 15)
+#define G_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) >> 15) & 0x1)
+#define C_0007C0_CSQ_INDIRECT2_BUSY 0xFFFF7FFF
+#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28)
+#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1)
+#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF
+#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29)
+#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1)
+#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF
+#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30)
+#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1)
+#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF
+#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31)
+#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1)
+#define C_0007C0_CP_BUSY 0x7FFFFFFF
+#define R_000E40_RBBM_STATUS 0x000E40
+#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0)
+#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F)
+#define C_000E40_CMDFIFO_AVAIL 0xFFFFFF80
+#define S_000E40_HIRQ_ON_RBB(x) (((x) & 0x1) << 8)
+#define G_000E40_HIRQ_ON_RBB(x) (((x) >> 8) & 0x1)
+#define C_000E40_HIRQ_ON_RBB 0xFFFFFEFF
+#define S_000E40_CPRQ_ON_RBB(x) (((x) & 0x1) << 9)
+#define G_000E40_CPRQ_ON_RBB(x) (((x) >> 9) & 0x1)
+#define C_000E40_CPRQ_ON_RBB 0xFFFFFDFF
+#define S_000E40_CFRQ_ON_RBB(x) (((x) & 0x1) << 10)
+#define G_000E40_CFRQ_ON_RBB(x) (((x) >> 10) & 0x1)
+#define C_000E40_CFRQ_ON_RBB 0xFFFFFBFF
+#define S_000E40_HIRQ_IN_RTBUF(x) (((x) & 0x1) << 11)
+#define G_000E40_HIRQ_IN_RTBUF(x) (((x) >> 11) & 0x1)
+#define C_000E40_HIRQ_IN_RTBUF 0xFFFFF7FF
+#define S_000E40_CPRQ_IN_RTBUF(x) (((x) & 0x1) << 12)
+#define G_000E40_CPRQ_IN_RTBUF(x) (((x) >> 12) & 0x1)
+#define C_000E40_CPRQ_IN_RTBUF 0xFFFFEFFF
+#define S_000E40_CFRQ_IN_RTBUF(x) (((x) & 0x1) << 13)
+#define G_000E40_CFRQ_IN_RTBUF(x) (((x) >> 13) & 0x1)
+#define C_000E40_CFRQ_IN_RTBUF 0xFFFFDFFF
+#define S_000E40_CF_PIPE_BUSY(x) (((x) & 0x1) << 14)
+#define G_000E40_CF_PIPE_BUSY(x) (((x) >> 14) & 0x1)
+#define C_000E40_CF_PIPE_BUSY 0xFFFFBFFF
+#define S_000E40_ENG_EV_BUSY(x) (((x) & 0x1) << 15)
+#define G_000E40_ENG_EV_BUSY(x) (((x) >> 15) & 0x1)
+#define C_000E40_ENG_EV_BUSY 0xFFFF7FFF
+#define S_000E40_CP_CMDSTRM_BUSY(x) (((x) & 0x1) << 16)
+#define G_000E40_CP_CMDSTRM_BUSY(x) (((x) >> 16) & 0x1)
+#define C_000E40_CP_CMDSTRM_BUSY 0xFFFEFFFF
+#define S_000E40_E2_BUSY(x) (((x) & 0x1) << 17)
+#define G_000E40_E2_BUSY(x) (((x) >> 17) & 0x1)
+#define C_000E40_E2_BUSY 0xFFFDFFFF
+#define S_000E40_RB2D_BUSY(x) (((x) & 0x1) << 18)
+#define G_000E40_RB2D_BUSY(x) (((x) >> 18) & 0x1)
+#define C_000E40_RB2D_BUSY 0xFFFBFFFF
+#define S_000E40_RB3D_BUSY(x) (((x) & 0x1) << 19)
+#define G_000E40_RB3D_BUSY(x) (((x) >> 19) & 0x1)
+#define C_000E40_RB3D_BUSY 0xFFF7FFFF
+#define S_000E40_VAP_BUSY(x) (((x) & 0x1) << 20)
+#define G_000E40_VAP_BUSY(x) (((x) >> 20) & 0x1)
+#define C_000E40_VAP_BUSY 0xFFEFFFFF
+#define S_000E40_RE_BUSY(x) (((x) & 0x1) << 21)
+#define G_000E40_RE_BUSY(x) (((x) >> 21) & 0x1)
+#define C_000E40_RE_BUSY 0xFFDFFFFF
+#define S_000E40_TAM_BUSY(x) (((x) & 0x1) << 22)
+#define G_000E40_TAM_BUSY(x) (((x) >> 22) & 0x1)
+#define C_000E40_TAM_BUSY 0xFFBFFFFF
+#define S_000E40_TDM_BUSY(x) (((x) & 0x1) << 23)
+#define G_000E40_TDM_BUSY(x) (((x) >> 23) & 0x1)
+#define C_000E40_TDM_BUSY 0xFF7FFFFF
+#define S_000E40_PB_BUSY(x) (((x) & 0x1) << 24)
+#define G_000E40_PB_BUSY(x) (((x) >> 24) & 0x1)
+#define C_000E40_PB_BUSY 0xFEFFFFFF
+#define S_000E40_TIM_BUSY(x) (((x) & 0x1) << 25)
+#define G_000E40_TIM_BUSY(x) (((x) >> 25) & 0x1)
+#define C_000E40_TIM_BUSY 0xFDFFFFFF
+#define S_000E40_GA_BUSY(x) (((x) & 0x1) << 26)
+#define G_000E40_GA_BUSY(x) (((x) >> 26) & 0x1)
+#define C_000E40_GA_BUSY 0xFBFFFFFF
+#define S_000E40_CBA2D_BUSY(x) (((x) & 0x1) << 27)
+#define G_000E40_CBA2D_BUSY(x) (((x) >> 27) & 0x1)
+#define C_000E40_CBA2D_BUSY 0xF7FFFFFF
+#define S_000E40_GUI_ACTIVE(x) (((x) & 0x1) << 31)
+#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1)
+#define C_000E40_GUI_ACTIVE 0x7FFFFFFF
+
+#endif
* Alex Deucher
* Jerome Glisse
*/
+/* RS600 / Radeon X1250/X1270 integrated GPU
+ *
+ * This file gather function specific to RS600 which is the IGP of
+ * the X1250/X1270 family supporting intel CPU (while RS690/RS740
+ * is the X1250/X1270 supporting AMD CPU). The display engine are
+ * the avivo one, bios is an atombios, 3D block are the one of the
+ * R4XX family. The GART is different from the RS400 one and is very
+ * close to the one of the R600 family (R600 likely being an evolution
+ * of the RS600 GART block).
+ */
#include "drmP.h"
-#include "radeon_reg.h"
#include "radeon.h"
-#include "avivod.h"
+#include "atom.h"
+#include "rs600d.h"
#include "rs600_reg_safe.h"
-/* rs600 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r300_mc_wait_for_idle(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
-
-/* This files gather functions specifics to :
- * rs600
- *
- * Some of these functions might be used by newer ASICs.
- */
void rs600_gpu_init(struct radeon_device *rdev);
int rs600_mc_wait_for_idle(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-
/*
* GART.
{
uint32_t tmp;
- tmp = RREG32_MC(RS600_MC_PT0_CNTL);
- tmp &= ~(RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE);
- WREG32_MC(RS600_MC_PT0_CNTL, tmp);
+ tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
+ tmp &= C_000100_INVALIDATE_ALL_L1_TLBS & C_000100_INVALIDATE_L2_CACHE;
+ WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
- tmp = RREG32_MC(RS600_MC_PT0_CNTL);
- tmp |= RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE;
- WREG32_MC(RS600_MC_PT0_CNTL, tmp);
+ tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
+ tmp |= S_000100_INVALIDATE_ALL_L1_TLBS(1) & S_000100_INVALIDATE_L2_CACHE(1);
+ WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
- tmp = RREG32_MC(RS600_MC_PT0_CNTL);
- tmp &= ~(RS600_INVALIDATE_ALL_L1_TLBS | RS600_INVALIDATE_L2_CACHE);
- WREG32_MC(RS600_MC_PT0_CNTL, tmp);
- tmp = RREG32_MC(RS600_MC_PT0_CNTL);
+ tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
+ tmp &= C_000100_INVALIDATE_ALL_L1_TLBS & C_000100_INVALIDATE_L2_CACHE;
+ WREG32_MC(R_000100_MC_PT0_CNTL, tmp);
+ tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
}
int rs600_gart_init(struct radeon_device *rdev)
int rs600_gart_enable(struct radeon_device *rdev)
{
- uint32_t tmp;
+ u32 tmp;
int r, i;
if (rdev->gart.table.vram.robj == NULL) {
r = radeon_gart_table_vram_pin(rdev);
if (r)
return r;
+ /* Enable bus master */
+ tmp = RREG32(R_00004C_BUS_CNTL) & C_00004C_BUS_MASTER_DIS;
+ WREG32(R_00004C_BUS_CNTL, tmp);
/* FIXME: setup default page */
- WREG32_MC(RS600_MC_PT0_CNTL,
- (RS600_EFFECTIVE_L2_CACHE_SIZE(6) |
- RS600_EFFECTIVE_L2_QUEUE_SIZE(6)));
+ WREG32_MC(R_000100_MC_PT0_CNTL,
+ (S_000100_EFFECTIVE_L2_CACHE_SIZE(6) |
+ S_000100_EFFECTIVE_L2_QUEUE_SIZE(6)));
for (i = 0; i < 19; i++) {
- WREG32_MC(RS600_MC_PT0_CLIENT0_CNTL + i,
- (RS600_ENABLE_TRANSLATION_MODE_OVERRIDE |
- RS600_SYSTEM_ACCESS_MODE_IN_SYS |
- RS600_SYSTEM_APERTURE_UNMAPPED_ACCESS_DEFAULT_PAGE |
- RS600_EFFECTIVE_L1_CACHE_SIZE(3) |
- RS600_ENABLE_FRAGMENT_PROCESSING |
- RS600_EFFECTIVE_L1_QUEUE_SIZE(3)));
+ WREG32_MC(R_00016C_MC_PT0_CLIENT0_CNTL + i,
+ S_00016C_ENABLE_TRANSLATION_MODE_OVERRIDE(1) |
+ S_00016C_SYSTEM_ACCESS_MODE_MASK(
+ V_00016C_SYSTEM_ACCESS_MODE_IN_SYS) |
+ S_00016C_SYSTEM_APERTURE_UNMAPPED_ACCESS(
+ V_00016C_SYSTEM_APERTURE_UNMAPPED_DEFAULT_PAGE) |
+ S_00016C_EFFECTIVE_L1_CACHE_SIZE(1) |
+ S_00016C_ENABLE_FRAGMENT_PROCESSING(1) |
+ S_00016C_EFFECTIVE_L1_QUEUE_SIZE(1));
}
/* System context map to GART space */
- WREG32_MC(RS600_MC_PT0_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.gtt_location);
- tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
- WREG32_MC(RS600_MC_PT0_SYSTEM_APERTURE_HIGH_ADDR, tmp);
+ WREG32_MC(R_000112_MC_PT0_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.gtt_start);
+ WREG32_MC(R_000114_MC_PT0_SYSTEM_APERTURE_HIGH_ADDR, rdev->mc.gtt_end);
/* enable first context */
- WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_START_ADDR, rdev->mc.gtt_location);
- tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
- WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_END_ADDR, tmp);
- WREG32_MC(RS600_MC_PT0_CONTEXT0_CNTL,
- (RS600_ENABLE_PAGE_TABLE | RS600_PAGE_TABLE_TYPE_FLAT));
+ WREG32_MC(R_00013C_MC_PT0_CONTEXT0_FLAT_START_ADDR, rdev->mc.gtt_start);
+ WREG32_MC(R_00014C_MC_PT0_CONTEXT0_FLAT_END_ADDR, rdev->mc.gtt_end);
+ WREG32_MC(R_000102_MC_PT0_CONTEXT0_CNTL,
+ S_000102_ENABLE_PAGE_TABLE(1) |
+ S_000102_PAGE_TABLE_DEPTH(V_000102_PAGE_TABLE_FLAT));
/* disable all other contexts */
for (i = 1; i < 8; i++) {
- WREG32_MC(RS600_MC_PT0_CONTEXT0_CNTL + i, 0);
+ WREG32_MC(R_000102_MC_PT0_CONTEXT0_CNTL + i, 0);
}
/* setup the page table */
- WREG32_MC(RS600_MC_PT0_CONTEXT0_FLAT_BASE_ADDR,
- rdev->gart.table_addr);
- WREG32_MC(RS600_MC_PT0_CONTEXT0_DEFAULT_READ_ADDR, 0);
+ WREG32_MC(R_00012C_MC_PT0_CONTEXT0_FLAT_BASE_ADDR,
+ rdev->gart.table_addr);
+ WREG32_MC(R_00011C_MC_PT0_CONTEXT0_DEFAULT_READ_ADDR, 0);
/* enable page tables */
- tmp = RREG32_MC(RS600_MC_PT0_CNTL);
- WREG32_MC(RS600_MC_PT0_CNTL, (tmp | RS600_ENABLE_PT));
- tmp = RREG32_MC(RS600_MC_CNTL1);
- WREG32_MC(RS600_MC_CNTL1, (tmp | RS600_ENABLE_PAGE_TABLES));
+ tmp = RREG32_MC(R_000100_MC_PT0_CNTL);
+ WREG32_MC(R_000100_MC_PT0_CNTL, (tmp | S_000100_ENABLE_PT(1)));
+ tmp = RREG32_MC(R_000009_MC_CNTL1);
+ WREG32_MC(R_000009_MC_CNTL1, (tmp | S_000009_ENABLE_PAGE_TABLES(1)));
rs600_gart_tlb_flush(rdev);
rdev->gart.ready = true;
return 0;
uint32_t tmp;
/* FIXME: disable out of gart access */
- WREG32_MC(RS600_MC_PT0_CNTL, 0);
- tmp = RREG32_MC(RS600_MC_CNTL1);
- tmp &= ~RS600_ENABLE_PAGE_TABLES;
- WREG32_MC(RS600_MC_CNTL1, tmp);
+ WREG32_MC(R_000100_MC_PT0_CNTL, 0);
+ tmp = RREG32_MC(R_000009_MC_CNTL1);
+ WREG32_MC(R_000009_MC_CNTL1, tmp & C_000009_ENABLE_PAGE_TABLES);
if (rdev->gart.table.vram.robj) {
radeon_object_kunmap(rdev->gart.table.vram.robj);
radeon_object_unpin(rdev->gart.table.vram.robj);
return 0;
}
-
-/*
- * MC.
- */
-void rs600_mc_disable_clients(struct radeon_device *rdev)
-{
- unsigned tmp;
-
- if (r100_gui_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait GUI idle while "
- "programming pipes. Bad things might happen.\n");
- }
-
- radeon_avivo_vga_render_disable(rdev);
-
- tmp = RREG32(AVIVO_D1VGA_CONTROL);
- WREG32(AVIVO_D1VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE);
- tmp = RREG32(AVIVO_D2VGA_CONTROL);
- WREG32(AVIVO_D2VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE);
-
- tmp = RREG32(AVIVO_D1CRTC_CONTROL);
- WREG32(AVIVO_D1CRTC_CONTROL, tmp & ~AVIVO_CRTC_EN);
- tmp = RREG32(AVIVO_D2CRTC_CONTROL);
- WREG32(AVIVO_D2CRTC_CONTROL, tmp & ~AVIVO_CRTC_EN);
-
- /* make sure all previous write got through */
- tmp = RREG32(AVIVO_D2CRTC_CONTROL);
-
- mdelay(1);
-}
-
-int rs600_mc_init(struct radeon_device *rdev)
-{
- uint32_t tmp;
- int r;
-
- if (r100_debugfs_rbbm_init(rdev)) {
- DRM_ERROR("Failed to register debugfs file for RBBM !\n");
- }
-
- rs600_gpu_init(rdev);
- rs600_gart_disable(rdev);
-
- /* Setup GPU memory space */
- rdev->mc.vram_location = 0xFFFFFFFFUL;
- rdev->mc.gtt_location = 0xFFFFFFFFUL;
- r = radeon_mc_setup(rdev);
- if (r) {
- return r;
- }
-
- /* Program GPU memory space */
- /* Enable bus master */
- tmp = RREG32(RADEON_BUS_CNTL) & ~RS600_BUS_MASTER_DIS;
- WREG32(RADEON_BUS_CNTL, tmp);
- /* FIXME: What does AGP means for such chipset ? */
- WREG32_MC(RS600_MC_AGP_LOCATION, 0x0FFFFFFF);
- /* FIXME: are this AGP reg in indirect MC range ? */
- WREG32_MC(RS600_MC_AGP_BASE, 0);
- WREG32_MC(RS600_MC_AGP_BASE_2, 0);
- rs600_mc_disable_clients(rdev);
- if (rs600_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
- }
- tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
- tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16);
- tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32_MC(RS600_MC_FB_LOCATION, tmp);
- WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
- return 0;
-}
-
-void rs600_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Interrupts
- */
int rs600_irq_set(struct radeon_device *rdev)
{
uint32_t tmp = 0;
uint32_t mode_int = 0;
if (rdev->irq.sw_int) {
- tmp |= RADEON_SW_INT_ENABLE;
+ tmp |= S_000040_SW_INT_EN(1);
}
if (rdev->irq.crtc_vblank_int[0]) {
- mode_int |= AVIVO_D1MODE_INT_MASK;
+ mode_int |= S_006540_D1MODE_VBLANK_INT_MASK(1);
}
if (rdev->irq.crtc_vblank_int[1]) {
- mode_int |= AVIVO_D2MODE_INT_MASK;
+ mode_int |= S_006540_D2MODE_VBLANK_INT_MASK(1);
}
- WREG32(RADEON_GEN_INT_CNTL, tmp);
- WREG32(AVIVO_DxMODE_INT_MASK, mode_int);
+ WREG32(R_000040_GEN_INT_CNTL, tmp);
+ WREG32(R_006540_DxMODE_INT_MASK, mode_int);
return 0;
}
static inline uint32_t rs600_irq_ack(struct radeon_device *rdev, u32 *r500_disp_int)
{
- uint32_t irqs = RREG32(RADEON_GEN_INT_STATUS);
- uint32_t irq_mask = RADEON_SW_INT_TEST;
-
- if (irqs & AVIVO_DISPLAY_INT_STATUS) {
- *r500_disp_int = RREG32(AVIVO_DISP_INTERRUPT_STATUS);
- if (*r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
- WREG32(AVIVO_D1MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+ uint32_t irqs = RREG32(R_000044_GEN_INT_STATUS);
+ uint32_t irq_mask = ~C_000044_SW_INT;
+
+ if (G_000044_DISPLAY_INT_STAT(irqs)) {
+ *r500_disp_int = RREG32(R_007EDC_DISP_INTERRUPT_STATUS);
+ if (G_007EDC_LB_D1_VBLANK_INTERRUPT(*r500_disp_int)) {
+ WREG32(R_006534_D1MODE_VBLANK_STATUS,
+ S_006534_D1MODE_VBLANK_ACK(1));
}
- if (*r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
- WREG32(AVIVO_D2MODE_VBLANK_STATUS, AVIVO_VBLANK_ACK);
+ if (G_007EDC_LB_D2_VBLANK_INTERRUPT(*r500_disp_int)) {
+ WREG32(R_006D34_D2MODE_VBLANK_STATUS,
+ S_006D34_D2MODE_VBLANK_ACK(1));
}
} else {
*r500_disp_int = 0;
}
if (irqs) {
- WREG32(RADEON_GEN_INT_STATUS, irqs);
+ WREG32(R_000044_GEN_INT_STATUS, irqs);
}
return irqs & irq_mask;
}
+void rs600_irq_disable(struct radeon_device *rdev)
+{
+ u32 tmp;
+
+ WREG32(R_000040_GEN_INT_CNTL, 0);
+ WREG32(R_006540_DxMODE_INT_MASK, 0);
+ /* Wait and acknowledge irq */
+ mdelay(1);
+ rs600_irq_ack(rdev, &tmp);
+}
+
int rs600_irq_process(struct radeon_device *rdev)
{
uint32_t status;
}
while (status || r500_disp_int) {
/* SW interrupt */
- if (status & RADEON_SW_INT_TEST) {
+ if (G_000040_SW_INT_EN(status))
radeon_fence_process(rdev);
- }
/* Vertical blank interrupts */
- if (r500_disp_int & AVIVO_D1_VBLANK_INTERRUPT) {
+ if (G_007EDC_LB_D1_VBLANK_INTERRUPT(r500_disp_int))
drm_handle_vblank(rdev->ddev, 0);
- }
- if (r500_disp_int & AVIVO_D2_VBLANK_INTERRUPT) {
+ if (G_007EDC_LB_D2_VBLANK_INTERRUPT(r500_disp_int))
drm_handle_vblank(rdev->ddev, 1);
- }
status = rs600_irq_ack(rdev, &r500_disp_int);
}
return IRQ_HANDLED;
u32 rs600_get_vblank_counter(struct radeon_device *rdev, int crtc)
{
if (crtc == 0)
- return RREG32(AVIVO_D1CRTC_FRAME_COUNT);
+ return RREG32(R_0060A4_D1CRTC_STATUS_FRAME_COUNT);
else
- return RREG32(AVIVO_D2CRTC_FRAME_COUNT);
-}
-
-
-/*
- * Global GPU functions
- */
-void rs600_disable_vga(struct radeon_device *rdev)
-{
- unsigned tmp;
-
- WREG32(0x330, 0);
- WREG32(0x338, 0);
- tmp = RREG32(0x300);
- tmp &= ~(3 << 16);
- WREG32(0x300, tmp);
- WREG32(0x308, (1 << 8));
- WREG32(0x310, rdev->mc.vram_location);
- WREG32(0x594, 0);
+ return RREG32(R_0068A4_D2CRTC_STATUS_FRAME_COUNT);
}
int rs600_mc_wait_for_idle(struct radeon_device *rdev)
{
unsigned i;
- uint32_t tmp;
for (i = 0; i < rdev->usec_timeout; i++) {
- /* read MC_STATUS */
- tmp = RREG32_MC(RS600_MC_STATUS);
- if (tmp & RS600_MC_STATUS_IDLE) {
+ if (G_000000_MC_IDLE(RREG32_MC(R_000000_MC_STATUS)))
return 0;
- }
- DRM_UDELAY(1);
+ udelay(1);
}
return -1;
}
-void rs600_errata(struct radeon_device *rdev)
-{
- rdev->pll_errata = 0;
-}
-
void rs600_gpu_init(struct radeon_device *rdev)
{
/* FIXME: HDP same place on rs600 ? */
r100_hdp_reset(rdev);
- rs600_disable_vga(rdev);
/* FIXME: is this correct ? */
r420_pipes_init(rdev);
- if (rs600_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
- }
+ /* Wait for mc idle */
+ if (rs600_mc_wait_for_idle(rdev))
+ dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
}
-
-/*
- * VRAM info.
- */
void rs600_vram_info(struct radeon_device *rdev)
{
/* FIXME: to do or is these values sane ? */
/* FIXME: implement, should this be like rs690 ? */
}
-
-/*
- * Indirect registers accessor
- */
uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg)
{
- uint32_t r;
-
- WREG32(RS600_MC_INDEX,
- ((reg & RS600_MC_ADDR_MASK) | RS600_MC_IND_CITF_ARB0));
- r = RREG32(RS600_MC_DATA);
- return r;
+ WREG32(R_000070_MC_IND_INDEX, S_000070_MC_IND_ADDR(reg) |
+ S_000070_MC_IND_CITF_ARB0(1));
+ return RREG32(R_000074_MC_IND_DATA);
}
void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
{
- WREG32(RS600_MC_INDEX,
- RS600_MC_IND_WR_EN | RS600_MC_IND_CITF_ARB0 |
- ((reg) & RS600_MC_ADDR_MASK));
- WREG32(RS600_MC_DATA, v);
+ WREG32(R_000070_MC_IND_INDEX, S_000070_MC_IND_ADDR(reg) |
+ S_000070_MC_IND_CITF_ARB0(1) | S_000070_MC_IND_WR_EN(1));
+ WREG32(R_000074_MC_IND_DATA, v);
}
-int rs600_init(struct radeon_device *rdev)
+void rs600_debugfs(struct radeon_device *rdev)
+{
+ if (r100_debugfs_rbbm_init(rdev))
+ DRM_ERROR("Failed to register debugfs file for RBBM !\n");
+}
+
+void rs600_set_safe_registers(struct radeon_device *rdev)
{
rdev->config.r300.reg_safe_bm = rs600_reg_safe_bm;
rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rs600_reg_safe_bm);
+}
+
+static void rs600_mc_program(struct radeon_device *rdev)
+{
+ struct rv515_mc_save save;
+
+ /* Stops all mc clients */
+ rv515_mc_stop(rdev, &save);
+
+ /* Wait for mc idle */
+ if (rs600_mc_wait_for_idle(rdev))
+ dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+
+ /* FIXME: What does AGP means for such chipset ? */
+ WREG32_MC(R_000005_MC_AGP_LOCATION, 0x0FFFFFFF);
+ WREG32_MC(R_000006_AGP_BASE, 0);
+ WREG32_MC(R_000007_AGP_BASE_2, 0);
+ /* Program MC */
+ WREG32_MC(R_000004_MC_FB_LOCATION,
+ S_000004_MC_FB_START(rdev->mc.vram_start >> 16) |
+ S_000004_MC_FB_TOP(rdev->mc.vram_end >> 16));
+ WREG32(R_000134_HDP_FB_LOCATION,
+ S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+
+ rv515_mc_resume(rdev, &save);
+}
+
+static int rs600_startup(struct radeon_device *rdev)
+{
+ int r;
+
+ rs600_mc_program(rdev);
+ /* Resume clock */
+ rv515_clock_startup(rdev);
+ /* Initialize GPU configuration (# pipes, ...) */
+ rs600_gpu_init(rdev);
+ /* Initialize GART (initialize after TTM so we can allocate
+ * memory through TTM but finalize after TTM) */
+ r = rs600_gart_enable(rdev);
+ if (r)
+ return r;
+ /* Enable IRQ */
+ rdev->irq.sw_int = true;
+ rs600_irq_set(rdev);
+ /* 1M ring buffer */
+ r = r100_cp_init(rdev, 1024 * 1024);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+ return r;
+ }
+ r = r100_wb_init(rdev);
+ if (r)
+ dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+ r = r100_ib_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+ return r;
+ }
+ return 0;
+}
+
+int rs600_resume(struct radeon_device *rdev)
+{
+ /* Make sur GART are not working */
+ rs600_gart_disable(rdev);
+ /* Resume clock before doing reset */
+ rv515_clock_startup(rdev);
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* post */
+ atom_asic_init(rdev->mode_info.atom_context);
+ /* Resume clock after posting */
+ rv515_clock_startup(rdev);
+ return rs600_startup(rdev);
+}
+
+int rs600_suspend(struct radeon_device *rdev)
+{
+ r100_cp_disable(rdev);
+ r100_wb_disable(rdev);
+ rs600_irq_disable(rdev);
+ rs600_gart_disable(rdev);
+ return 0;
+}
+
+void rs600_fini(struct radeon_device *rdev)
+{
+ rs600_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ radeon_gem_fini(rdev);
+ rs600_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ radeon_fence_driver_fini(rdev);
+ radeon_object_fini(rdev);
+ radeon_atombios_fini(rdev);
+ kfree(rdev->bios);
+ rdev->bios = NULL;
+}
+
+int rs600_init(struct radeon_device *rdev)
+{
+ int r;
+
+ /* Disable VGA */
+ rv515_vga_render_disable(rdev);
+ /* Initialize scratch registers */
+ radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
+ /* BIOS */
+ if (!radeon_get_bios(rdev)) {
+ if (ASIC_IS_AVIVO(rdev))
+ return -EINVAL;
+ }
+ if (rdev->is_atom_bios) {
+ r = radeon_atombios_init(rdev);
+ if (r)
+ return r;
+ } else {
+ dev_err(rdev->dev, "Expecting atombios for RS600 GPU\n");
+ return -EINVAL;
+ }
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev,
+ "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* check if cards are posted or not */
+ if (!radeon_card_posted(rdev) && rdev->bios) {
+ DRM_INFO("GPU not posted. posting now...\n");
+ atom_asic_init(rdev->mode_info.atom_context);
+ }
+ /* Initialize clocks */
+ radeon_get_clock_info(rdev->ddev);
+ /* Get vram informations */
+ rs600_vram_info(rdev);
+ /* Initialize memory controller (also test AGP) */
+ r = r420_mc_init(rdev);
+ if (r)
+ return r;
+ rs600_debugfs(rdev);
+ /* Fence driver */
+ r = radeon_fence_driver_init(rdev);
+ if (r)
+ return r;
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ /* Memory manager */
+ r = radeon_object_init(rdev);
+ if (r)
+ return r;
+ r = rs600_gart_init(rdev);
+ if (r)
+ return r;
+ rs600_set_safe_registers(rdev);
+ rdev->accel_working = true;
+ r = rs600_startup(rdev);
+ if (r) {
+ /* Somethings want wront with the accel init stop accel */
+ dev_err(rdev->dev, "Disabling GPU acceleration\n");
+ rs600_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ rs600_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ rdev->accel_working = false;
+ }
return 0;
}
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RS600D_H__
+#define __RS600D_H__
+
+/* Registers */
+#define R_000040_GEN_INT_CNTL 0x000040
+#define S_000040_DISPLAY_INT_STATUS(x) (((x) & 0x1) << 0)
+#define G_000040_DISPLAY_INT_STATUS(x) (((x) >> 0) & 0x1)
+#define C_000040_DISPLAY_INT_STATUS 0xFFFFFFFE
+#define S_000040_DMA_VIPH0_INT_EN(x) (((x) & 0x1) << 12)
+#define G_000040_DMA_VIPH0_INT_EN(x) (((x) >> 12) & 0x1)
+#define C_000040_DMA_VIPH0_INT_EN 0xFFFFEFFF
+#define S_000040_CRTC2_VSYNC(x) (((x) & 0x1) << 6)
+#define G_000040_CRTC2_VSYNC(x) (((x) >> 6) & 0x1)
+#define C_000040_CRTC2_VSYNC 0xFFFFFFBF
+#define S_000040_SNAPSHOT2(x) (((x) & 0x1) << 7)
+#define G_000040_SNAPSHOT2(x) (((x) >> 7) & 0x1)
+#define C_000040_SNAPSHOT2 0xFFFFFF7F
+#define S_000040_CRTC2_VBLANK(x) (((x) & 0x1) << 9)
+#define G_000040_CRTC2_VBLANK(x) (((x) >> 9) & 0x1)
+#define C_000040_CRTC2_VBLANK 0xFFFFFDFF
+#define S_000040_FP2_DETECT(x) (((x) & 0x1) << 10)
+#define G_000040_FP2_DETECT(x) (((x) >> 10) & 0x1)
+#define C_000040_FP2_DETECT 0xFFFFFBFF
+#define S_000040_VSYNC_DIFF_OVER_LIMIT(x) (((x) & 0x1) << 11)
+#define G_000040_VSYNC_DIFF_OVER_LIMIT(x) (((x) >> 11) & 0x1)
+#define C_000040_VSYNC_DIFF_OVER_LIMIT 0xFFFFF7FF
+#define S_000040_DMA_VIPH1_INT_EN(x) (((x) & 0x1) << 13)
+#define G_000040_DMA_VIPH1_INT_EN(x) (((x) >> 13) & 0x1)
+#define C_000040_DMA_VIPH1_INT_EN 0xFFFFDFFF
+#define S_000040_DMA_VIPH2_INT_EN(x) (((x) & 0x1) << 14)
+#define G_000040_DMA_VIPH2_INT_EN(x) (((x) >> 14) & 0x1)
+#define C_000040_DMA_VIPH2_INT_EN 0xFFFFBFFF
+#define S_000040_DMA_VIPH3_INT_EN(x) (((x) & 0x1) << 15)
+#define G_000040_DMA_VIPH3_INT_EN(x) (((x) >> 15) & 0x1)
+#define C_000040_DMA_VIPH3_INT_EN 0xFFFF7FFF
+#define S_000040_I2C_INT_EN(x) (((x) & 0x1) << 17)
+#define G_000040_I2C_INT_EN(x) (((x) >> 17) & 0x1)
+#define C_000040_I2C_INT_EN 0xFFFDFFFF
+#define S_000040_GUI_IDLE(x) (((x) & 0x1) << 19)
+#define G_000040_GUI_IDLE(x) (((x) >> 19) & 0x1)
+#define C_000040_GUI_IDLE 0xFFF7FFFF
+#define S_000040_VIPH_INT_EN(x) (((x) & 0x1) << 24)
+#define G_000040_VIPH_INT_EN(x) (((x) >> 24) & 0x1)
+#define C_000040_VIPH_INT_EN 0xFEFFFFFF
+#define S_000040_SW_INT_EN(x) (((x) & 0x1) << 25)
+#define G_000040_SW_INT_EN(x) (((x) >> 25) & 0x1)
+#define C_000040_SW_INT_EN 0xFDFFFFFF
+#define S_000040_GEYSERVILLE(x) (((x) & 0x1) << 27)
+#define G_000040_GEYSERVILLE(x) (((x) >> 27) & 0x1)
+#define C_000040_GEYSERVILLE 0xF7FFFFFF
+#define S_000040_HDCP_AUTHORIZED_INT(x) (((x) & 0x1) << 28)
+#define G_000040_HDCP_AUTHORIZED_INT(x) (((x) >> 28) & 0x1)
+#define C_000040_HDCP_AUTHORIZED_INT 0xEFFFFFFF
+#define S_000040_DVI_I2C_INT(x) (((x) & 0x1) << 29)
+#define G_000040_DVI_I2C_INT(x) (((x) >> 29) & 0x1)
+#define C_000040_DVI_I2C_INT 0xDFFFFFFF
+#define S_000040_GUIDMA(x) (((x) & 0x1) << 30)
+#define G_000040_GUIDMA(x) (((x) >> 30) & 0x1)
+#define C_000040_GUIDMA 0xBFFFFFFF
+#define S_000040_VIDDMA(x) (((x) & 0x1) << 31)
+#define G_000040_VIDDMA(x) (((x) >> 31) & 0x1)
+#define C_000040_VIDDMA 0x7FFFFFFF
+#define R_000044_GEN_INT_STATUS 0x000044
+#define S_000044_DISPLAY_INT_STAT(x) (((x) & 0x1) << 0)
+#define G_000044_DISPLAY_INT_STAT(x) (((x) >> 0) & 0x1)
+#define C_000044_DISPLAY_INT_STAT 0xFFFFFFFE
+#define S_000044_VGA_INT_STAT(x) (((x) & 0x1) << 1)
+#define G_000044_VGA_INT_STAT(x) (((x) >> 1) & 0x1)
+#define C_000044_VGA_INT_STAT 0xFFFFFFFD
+#define S_000044_CAP0_INT_ACTIVE(x) (((x) & 0x1) << 8)
+#define G_000044_CAP0_INT_ACTIVE(x) (((x) >> 8) & 0x1)
+#define C_000044_CAP0_INT_ACTIVE 0xFFFFFEFF
+#define S_000044_DMA_VIPH0_INT(x) (((x) & 0x1) << 12)
+#define G_000044_DMA_VIPH0_INT(x) (((x) >> 12) & 0x1)
+#define C_000044_DMA_VIPH0_INT 0xFFFFEFFF
+#define S_000044_DMA_VIPH1_INT(x) (((x) & 0x1) << 13)
+#define G_000044_DMA_VIPH1_INT(x) (((x) >> 13) & 0x1)
+#define C_000044_DMA_VIPH1_INT 0xFFFFDFFF
+#define S_000044_DMA_VIPH2_INT(x) (((x) & 0x1) << 14)
+#define G_000044_DMA_VIPH2_INT(x) (((x) >> 14) & 0x1)
+#define C_000044_DMA_VIPH2_INT 0xFFFFBFFF
+#define S_000044_DMA_VIPH3_INT(x) (((x) & 0x1) << 15)
+#define G_000044_DMA_VIPH3_INT(x) (((x) >> 15) & 0x1)
+#define C_000044_DMA_VIPH3_INT 0xFFFF7FFF
+#define S_000044_MC_PROBE_FAULT_STAT(x) (((x) & 0x1) << 16)
+#define G_000044_MC_PROBE_FAULT_STAT(x) (((x) >> 16) & 0x1)
+#define C_000044_MC_PROBE_FAULT_STAT 0xFFFEFFFF
+#define S_000044_I2C_INT(x) (((x) & 0x1) << 17)
+#define G_000044_I2C_INT(x) (((x) >> 17) & 0x1)
+#define C_000044_I2C_INT 0xFFFDFFFF
+#define S_000044_SCRATCH_INT_STAT(x) (((x) & 0x1) << 18)
+#define G_000044_SCRATCH_INT_STAT(x) (((x) >> 18) & 0x1)
+#define C_000044_SCRATCH_INT_STAT 0xFFFBFFFF
+#define S_000044_GUI_IDLE_STAT(x) (((x) & 0x1) << 19)
+#define G_000044_GUI_IDLE_STAT(x) (((x) >> 19) & 0x1)
+#define C_000044_GUI_IDLE_STAT 0xFFF7FFFF
+#define S_000044_ATI_OVERDRIVE_INT_STAT(x) (((x) & 0x1) << 20)
+#define G_000044_ATI_OVERDRIVE_INT_STAT(x) (((x) >> 20) & 0x1)
+#define C_000044_ATI_OVERDRIVE_INT_STAT 0xFFEFFFFF
+#define S_000044_MC_PROTECTION_FAULT_STAT(x) (((x) & 0x1) << 21)
+#define G_000044_MC_PROTECTION_FAULT_STAT(x) (((x) >> 21) & 0x1)
+#define C_000044_MC_PROTECTION_FAULT_STAT 0xFFDFFFFF
+#define S_000044_RBBM_READ_INT_STAT(x) (((x) & 0x1) << 22)
+#define G_000044_RBBM_READ_INT_STAT(x) (((x) >> 22) & 0x1)
+#define C_000044_RBBM_READ_INT_STAT 0xFFBFFFFF
+#define S_000044_CB_CONTEXT_SWITCH_STAT(x) (((x) & 0x1) << 23)
+#define G_000044_CB_CONTEXT_SWITCH_STAT(x) (((x) >> 23) & 0x1)
+#define C_000044_CB_CONTEXT_SWITCH_STAT 0xFF7FFFFF
+#define S_000044_VIPH_INT(x) (((x) & 0x1) << 24)
+#define G_000044_VIPH_INT(x) (((x) >> 24) & 0x1)
+#define C_000044_VIPH_INT 0xFEFFFFFF
+#define S_000044_SW_INT(x) (((x) & 0x1) << 25)
+#define G_000044_SW_INT(x) (((x) >> 25) & 0x1)
+#define C_000044_SW_INT 0xFDFFFFFF
+#define S_000044_SW_INT_SET(x) (((x) & 0x1) << 26)
+#define G_000044_SW_INT_SET(x) (((x) >> 26) & 0x1)
+#define C_000044_SW_INT_SET 0xFBFFFFFF
+#define S_000044_IDCT_INT_STAT(x) (((x) & 0x1) << 27)
+#define G_000044_IDCT_INT_STAT(x) (((x) >> 27) & 0x1)
+#define C_000044_IDCT_INT_STAT 0xF7FFFFFF
+#define S_000044_GUIDMA_STAT(x) (((x) & 0x1) << 30)
+#define G_000044_GUIDMA_STAT(x) (((x) >> 30) & 0x1)
+#define C_000044_GUIDMA_STAT 0xBFFFFFFF
+#define S_000044_VIDDMA_STAT(x) (((x) & 0x1) << 31)
+#define G_000044_VIDDMA_STAT(x) (((x) >> 31) & 0x1)
+#define C_000044_VIDDMA_STAT 0x7FFFFFFF
+#define R_00004C_BUS_CNTL 0x00004C
+#define S_00004C_BUS_MASTER_DIS(x) (((x) & 0x1) << 14)
+#define G_00004C_BUS_MASTER_DIS(x) (((x) >> 14) & 0x1)
+#define C_00004C_BUS_MASTER_DIS 0xFFFFBFFF
+#define S_00004C_BUS_MSI_REARM(x) (((x) & 0x1) << 20)
+#define G_00004C_BUS_MSI_REARM(x) (((x) >> 20) & 0x1)
+#define C_00004C_BUS_MSI_REARM 0xFFEFFFFF
+#define R_000070_MC_IND_INDEX 0x000070
+#define S_000070_MC_IND_ADDR(x) (((x) & 0xFFFF) << 0)
+#define G_000070_MC_IND_ADDR(x) (((x) >> 0) & 0xFFFF)
+#define C_000070_MC_IND_ADDR 0xFFFF0000
+#define S_000070_MC_IND_SEQ_RBS_0(x) (((x) & 0x1) << 16)
+#define G_000070_MC_IND_SEQ_RBS_0(x) (((x) >> 16) & 0x1)
+#define C_000070_MC_IND_SEQ_RBS_0 0xFFFEFFFF
+#define S_000070_MC_IND_SEQ_RBS_1(x) (((x) & 0x1) << 17)
+#define G_000070_MC_IND_SEQ_RBS_1(x) (((x) >> 17) & 0x1)
+#define C_000070_MC_IND_SEQ_RBS_1 0xFFFDFFFF
+#define S_000070_MC_IND_SEQ_RBS_2(x) (((x) & 0x1) << 18)
+#define G_000070_MC_IND_SEQ_RBS_2(x) (((x) >> 18) & 0x1)
+#define C_000070_MC_IND_SEQ_RBS_2 0xFFFBFFFF
+#define S_000070_MC_IND_SEQ_RBS_3(x) (((x) & 0x1) << 19)
+#define G_000070_MC_IND_SEQ_RBS_3(x) (((x) >> 19) & 0x1)
+#define C_000070_MC_IND_SEQ_RBS_3 0xFFF7FFFF
+#define S_000070_MC_IND_AIC_RBS(x) (((x) & 0x1) << 20)
+#define G_000070_MC_IND_AIC_RBS(x) (((x) >> 20) & 0x1)
+#define C_000070_MC_IND_AIC_RBS 0xFFEFFFFF
+#define S_000070_MC_IND_CITF_ARB0(x) (((x) & 0x1) << 21)
+#define G_000070_MC_IND_CITF_ARB0(x) (((x) >> 21) & 0x1)
+#define C_000070_MC_IND_CITF_ARB0 0xFFDFFFFF
+#define S_000070_MC_IND_CITF_ARB1(x) (((x) & 0x1) << 22)
+#define G_000070_MC_IND_CITF_ARB1(x) (((x) >> 22) & 0x1)
+#define C_000070_MC_IND_CITF_ARB1 0xFFBFFFFF
+#define S_000070_MC_IND_WR_EN(x) (((x) & 0x1) << 23)
+#define G_000070_MC_IND_WR_EN(x) (((x) >> 23) & 0x1)
+#define C_000070_MC_IND_WR_EN 0xFF7FFFFF
+#define S_000070_MC_IND_RD_INV(x) (((x) & 0x1) << 24)
+#define G_000070_MC_IND_RD_INV(x) (((x) >> 24) & 0x1)
+#define C_000070_MC_IND_RD_INV 0xFEFFFFFF
+#define R_000074_MC_IND_DATA 0x000074
+#define S_000074_MC_IND_DATA(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_000074_MC_IND_DATA(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_000074_MC_IND_DATA 0x00000000
+#define R_000134_HDP_FB_LOCATION 0x000134
+#define S_000134_HDP_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000134_HDP_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000134_HDP_FB_START 0xFFFF0000
+#define R_0007C0_CP_STAT 0x0007C0
+#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0)
+#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1)
+#define C_0007C0_MRU_BUSY 0xFFFFFFFE
+#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1)
+#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1)
+#define C_0007C0_MWU_BUSY 0xFFFFFFFD
+#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2)
+#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1)
+#define C_0007C0_RSIU_BUSY 0xFFFFFFFB
+#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3)
+#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1)
+#define C_0007C0_RCIU_BUSY 0xFFFFFFF7
+#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9)
+#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1)
+#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF
+#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10)
+#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1)
+#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF
+#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11)
+#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1)
+#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF
+#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12)
+#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1)
+#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF
+#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13)
+#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1)
+#define C_0007C0_CSI_BUSY 0xFFFFDFFF
+#define S_0007C0_CSF_INDIRECT2_BUSY(x) (((x) & 0x1) << 14)
+#define G_0007C0_CSF_INDIRECT2_BUSY(x) (((x) >> 14) & 0x1)
+#define C_0007C0_CSF_INDIRECT2_BUSY 0xFFFFBFFF
+#define S_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) & 0x1) << 15)
+#define G_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) >> 15) & 0x1)
+#define C_0007C0_CSQ_INDIRECT2_BUSY 0xFFFF7FFF
+#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28)
+#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1)
+#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF
+#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29)
+#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1)
+#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF
+#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30)
+#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1)
+#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF
+#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31)
+#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1)
+#define C_0007C0_CP_BUSY 0x7FFFFFFF
+#define R_000E40_RBBM_STATUS 0x000E40
+#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0)
+#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F)
+#define C_000E40_CMDFIFO_AVAIL 0xFFFFFF80
+#define S_000E40_HIRQ_ON_RBB(x) (((x) & 0x1) << 8)
+#define G_000E40_HIRQ_ON_RBB(x) (((x) >> 8) & 0x1)
+#define C_000E40_HIRQ_ON_RBB 0xFFFFFEFF
+#define S_000E40_CPRQ_ON_RBB(x) (((x) & 0x1) << 9)
+#define G_000E40_CPRQ_ON_RBB(x) (((x) >> 9) & 0x1)
+#define C_000E40_CPRQ_ON_RBB 0xFFFFFDFF
+#define S_000E40_CFRQ_ON_RBB(x) (((x) & 0x1) << 10)
+#define G_000E40_CFRQ_ON_RBB(x) (((x) >> 10) & 0x1)
+#define C_000E40_CFRQ_ON_RBB 0xFFFFFBFF
+#define S_000E40_HIRQ_IN_RTBUF(x) (((x) & 0x1) << 11)
+#define G_000E40_HIRQ_IN_RTBUF(x) (((x) >> 11) & 0x1)
+#define C_000E40_HIRQ_IN_RTBUF 0xFFFFF7FF
+#define S_000E40_CPRQ_IN_RTBUF(x) (((x) & 0x1) << 12)
+#define G_000E40_CPRQ_IN_RTBUF(x) (((x) >> 12) & 0x1)
+#define C_000E40_CPRQ_IN_RTBUF 0xFFFFEFFF
+#define S_000E40_CFRQ_IN_RTBUF(x) (((x) & 0x1) << 13)
+#define G_000E40_CFRQ_IN_RTBUF(x) (((x) >> 13) & 0x1)
+#define C_000E40_CFRQ_IN_RTBUF 0xFFFFDFFF
+#define S_000E40_CF_PIPE_BUSY(x) (((x) & 0x1) << 14)
+#define G_000E40_CF_PIPE_BUSY(x) (((x) >> 14) & 0x1)
+#define C_000E40_CF_PIPE_BUSY 0xFFFFBFFF
+#define S_000E40_ENG_EV_BUSY(x) (((x) & 0x1) << 15)
+#define G_000E40_ENG_EV_BUSY(x) (((x) >> 15) & 0x1)
+#define C_000E40_ENG_EV_BUSY 0xFFFF7FFF
+#define S_000E40_CP_CMDSTRM_BUSY(x) (((x) & 0x1) << 16)
+#define G_000E40_CP_CMDSTRM_BUSY(x) (((x) >> 16) & 0x1)
+#define C_000E40_CP_CMDSTRM_BUSY 0xFFFEFFFF
+#define S_000E40_E2_BUSY(x) (((x) & 0x1) << 17)
+#define G_000E40_E2_BUSY(x) (((x) >> 17) & 0x1)
+#define C_000E40_E2_BUSY 0xFFFDFFFF
+#define S_000E40_RB2D_BUSY(x) (((x) & 0x1) << 18)
+#define G_000E40_RB2D_BUSY(x) (((x) >> 18) & 0x1)
+#define C_000E40_RB2D_BUSY 0xFFFBFFFF
+#define S_000E40_RB3D_BUSY(x) (((x) & 0x1) << 19)
+#define G_000E40_RB3D_BUSY(x) (((x) >> 19) & 0x1)
+#define C_000E40_RB3D_BUSY 0xFFF7FFFF
+#define S_000E40_VAP_BUSY(x) (((x) & 0x1) << 20)
+#define G_000E40_VAP_BUSY(x) (((x) >> 20) & 0x1)
+#define C_000E40_VAP_BUSY 0xFFEFFFFF
+#define S_000E40_RE_BUSY(x) (((x) & 0x1) << 21)
+#define G_000E40_RE_BUSY(x) (((x) >> 21) & 0x1)
+#define C_000E40_RE_BUSY 0xFFDFFFFF
+#define S_000E40_TAM_BUSY(x) (((x) & 0x1) << 22)
+#define G_000E40_TAM_BUSY(x) (((x) >> 22) & 0x1)
+#define C_000E40_TAM_BUSY 0xFFBFFFFF
+#define S_000E40_TDM_BUSY(x) (((x) & 0x1) << 23)
+#define G_000E40_TDM_BUSY(x) (((x) >> 23) & 0x1)
+#define C_000E40_TDM_BUSY 0xFF7FFFFF
+#define S_000E40_PB_BUSY(x) (((x) & 0x1) << 24)
+#define G_000E40_PB_BUSY(x) (((x) >> 24) & 0x1)
+#define C_000E40_PB_BUSY 0xFEFFFFFF
+#define S_000E40_TIM_BUSY(x) (((x) & 0x1) << 25)
+#define G_000E40_TIM_BUSY(x) (((x) >> 25) & 0x1)
+#define C_000E40_TIM_BUSY 0xFDFFFFFF
+#define S_000E40_GA_BUSY(x) (((x) & 0x1) << 26)
+#define G_000E40_GA_BUSY(x) (((x) >> 26) & 0x1)
+#define C_000E40_GA_BUSY 0xFBFFFFFF
+#define S_000E40_CBA2D_BUSY(x) (((x) & 0x1) << 27)
+#define G_000E40_CBA2D_BUSY(x) (((x) >> 27) & 0x1)
+#define C_000E40_CBA2D_BUSY 0xF7FFFFFF
+#define S_000E40_GUI_ACTIVE(x) (((x) & 0x1) << 31)
+#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1)
+#define C_000E40_GUI_ACTIVE 0x7FFFFFFF
+#define R_0060A4_D1CRTC_STATUS_FRAME_COUNT 0x0060A4
+#define S_0060A4_D1CRTC_FRAME_COUNT(x) (((x) & 0xFFFFFF) << 0)
+#define G_0060A4_D1CRTC_FRAME_COUNT(x) (((x) >> 0) & 0xFFFFFF)
+#define C_0060A4_D1CRTC_FRAME_COUNT 0xFF000000
+#define R_006534_D1MODE_VBLANK_STATUS 0x006534
+#define S_006534_D1MODE_VBLANK_OCCURRED(x) (((x) & 0x1) << 0)
+#define G_006534_D1MODE_VBLANK_OCCURRED(x) (((x) >> 0) & 0x1)
+#define C_006534_D1MODE_VBLANK_OCCURRED 0xFFFFFFFE
+#define S_006534_D1MODE_VBLANK_ACK(x) (((x) & 0x1) << 4)
+#define G_006534_D1MODE_VBLANK_ACK(x) (((x) >> 4) & 0x1)
+#define C_006534_D1MODE_VBLANK_ACK 0xFFFFFFEF
+#define S_006534_D1MODE_VBLANK_STAT(x) (((x) & 0x1) << 12)
+#define G_006534_D1MODE_VBLANK_STAT(x) (((x) >> 12) & 0x1)
+#define C_006534_D1MODE_VBLANK_STAT 0xFFFFEFFF
+#define S_006534_D1MODE_VBLANK_INTERRUPT(x) (((x) & 0x1) << 16)
+#define G_006534_D1MODE_VBLANK_INTERRUPT(x) (((x) >> 16) & 0x1)
+#define C_006534_D1MODE_VBLANK_INTERRUPT 0xFFFEFFFF
+#define R_006540_DxMODE_INT_MASK 0x006540
+#define S_006540_D1MODE_VBLANK_INT_MASK(x) (((x) & 0x1) << 0)
+#define G_006540_D1MODE_VBLANK_INT_MASK(x) (((x) >> 0) & 0x1)
+#define C_006540_D1MODE_VBLANK_INT_MASK 0xFFFFFFFE
+#define S_006540_D1MODE_VLINE_INT_MASK(x) (((x) & 0x1) << 4)
+#define G_006540_D1MODE_VLINE_INT_MASK(x) (((x) >> 4) & 0x1)
+#define C_006540_D1MODE_VLINE_INT_MASK 0xFFFFFFEF
+#define S_006540_D2MODE_VBLANK_INT_MASK(x) (((x) & 0x1) << 8)
+#define G_006540_D2MODE_VBLANK_INT_MASK(x) (((x) >> 8) & 0x1)
+#define C_006540_D2MODE_VBLANK_INT_MASK 0xFFFFFEFF
+#define S_006540_D2MODE_VLINE_INT_MASK(x) (((x) & 0x1) << 12)
+#define G_006540_D2MODE_VLINE_INT_MASK(x) (((x) >> 12) & 0x1)
+#define C_006540_D2MODE_VLINE_INT_MASK 0xFFFFEFFF
+#define S_006540_D1MODE_VBLANK_CP_SEL(x) (((x) & 0x1) << 30)
+#define G_006540_D1MODE_VBLANK_CP_SEL(x) (((x) >> 30) & 0x1)
+#define C_006540_D1MODE_VBLANK_CP_SEL 0xBFFFFFFF
+#define S_006540_D2MODE_VBLANK_CP_SEL(x) (((x) & 0x1) << 31)
+#define G_006540_D2MODE_VBLANK_CP_SEL(x) (((x) >> 31) & 0x1)
+#define C_006540_D2MODE_VBLANK_CP_SEL 0x7FFFFFFF
+#define R_0068A4_D2CRTC_STATUS_FRAME_COUNT 0x0068A4
+#define S_0068A4_D2CRTC_FRAME_COUNT(x) (((x) & 0xFFFFFF) << 0)
+#define G_0068A4_D2CRTC_FRAME_COUNT(x) (((x) >> 0) & 0xFFFFFF)
+#define C_0068A4_D2CRTC_FRAME_COUNT 0xFF000000
+#define R_006D34_D2MODE_VBLANK_STATUS 0x006D34
+#define S_006D34_D2MODE_VBLANK_OCCURRED(x) (((x) & 0x1) << 0)
+#define G_006D34_D2MODE_VBLANK_OCCURRED(x) (((x) >> 0) & 0x1)
+#define C_006D34_D2MODE_VBLANK_OCCURRED 0xFFFFFFFE
+#define S_006D34_D2MODE_VBLANK_ACK(x) (((x) & 0x1) << 4)
+#define G_006D34_D2MODE_VBLANK_ACK(x) (((x) >> 4) & 0x1)
+#define C_006D34_D2MODE_VBLANK_ACK 0xFFFFFFEF
+#define S_006D34_D2MODE_VBLANK_STAT(x) (((x) & 0x1) << 12)
+#define G_006D34_D2MODE_VBLANK_STAT(x) (((x) >> 12) & 0x1)
+#define C_006D34_D2MODE_VBLANK_STAT 0xFFFFEFFF
+#define S_006D34_D2MODE_VBLANK_INTERRUPT(x) (((x) & 0x1) << 16)
+#define G_006D34_D2MODE_VBLANK_INTERRUPT(x) (((x) >> 16) & 0x1)
+#define C_006D34_D2MODE_VBLANK_INTERRUPT 0xFFFEFFFF
+#define R_007EDC_DISP_INTERRUPT_STATUS 0x007EDC
+#define S_007EDC_LB_D1_VBLANK_INTERRUPT(x) (((x) & 0x1) << 4)
+#define G_007EDC_LB_D1_VBLANK_INTERRUPT(x) (((x) >> 4) & 0x1)
+#define C_007EDC_LB_D1_VBLANK_INTERRUPT 0xFFFFFFEF
+#define S_007EDC_LB_D2_VBLANK_INTERRUPT(x) (((x) & 0x1) << 5)
+#define G_007EDC_LB_D2_VBLANK_INTERRUPT(x) (((x) >> 5) & 0x1)
+#define C_007EDC_LB_D2_VBLANK_INTERRUPT 0xFFFFFFDF
+
+
+/* MC registers */
+#define R_000000_MC_STATUS 0x000000
+#define S_000000_MC_IDLE(x) (((x) & 0x1) << 0)
+#define G_000000_MC_IDLE(x) (((x) >> 0) & 0x1)
+#define C_000000_MC_IDLE 0xFFFFFFFE
+#define R_000004_MC_FB_LOCATION 0x000004
+#define S_000004_MC_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000004_MC_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000004_MC_FB_START 0xFFFF0000
+#define S_000004_MC_FB_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000004_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000004_MC_FB_TOP 0x0000FFFF
+#define R_000005_MC_AGP_LOCATION 0x000005
+#define S_000005_MC_AGP_START(x) (((x) & 0xFFFF) << 0)
+#define G_000005_MC_AGP_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000005_MC_AGP_START 0xFFFF0000
+#define S_000005_MC_AGP_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000005_MC_AGP_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000005_MC_AGP_TOP 0x0000FFFF
+#define R_000006_AGP_BASE 0x000006
+#define S_000006_AGP_BASE_ADDR(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_000006_AGP_BASE_ADDR(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_000006_AGP_BASE_ADDR 0x00000000
+#define R_000007_AGP_BASE_2 0x000007
+#define S_000007_AGP_BASE_ADDR_2(x) (((x) & 0xF) << 0)
+#define G_000007_AGP_BASE_ADDR_2(x) (((x) >> 0) & 0xF)
+#define C_000007_AGP_BASE_ADDR_2 0xFFFFFFF0
+#define R_000009_MC_CNTL1 0x000009
+#define S_000009_ENABLE_PAGE_TABLES(x) (((x) & 0x1) << 26)
+#define G_000009_ENABLE_PAGE_TABLES(x) (((x) >> 26) & 0x1)
+#define C_000009_ENABLE_PAGE_TABLES 0xFBFFFFFF
+/* FIXME don't know the various field size need feedback from AMD */
+#define R_000100_MC_PT0_CNTL 0x000100
+#define S_000100_ENABLE_PT(x) (((x) & 0x1) << 0)
+#define G_000100_ENABLE_PT(x) (((x) >> 0) & 0x1)
+#define C_000100_ENABLE_PT 0xFFFFFFFE
+#define S_000100_EFFECTIVE_L2_CACHE_SIZE(x) (((x) & 0x7) << 15)
+#define G_000100_EFFECTIVE_L2_CACHE_SIZE(x) (((x) >> 15) & 0x7)
+#define C_000100_EFFECTIVE_L2_CACHE_SIZE 0xFFFC7FFF
+#define S_000100_EFFECTIVE_L2_QUEUE_SIZE(x) (((x) & 0x7) << 21)
+#define G_000100_EFFECTIVE_L2_QUEUE_SIZE(x) (((x) >> 21) & 0x7)
+#define C_000100_EFFECTIVE_L2_QUEUE_SIZE 0xFF1FFFFF
+#define S_000100_INVALIDATE_ALL_L1_TLBS(x) (((x) & 0x1) << 28)
+#define G_000100_INVALIDATE_ALL_L1_TLBS(x) (((x) >> 28) & 0x1)
+#define C_000100_INVALIDATE_ALL_L1_TLBS 0xEFFFFFFF
+#define S_000100_INVALIDATE_L2_CACHE(x) (((x) & 0x1) << 29)
+#define G_000100_INVALIDATE_L2_CACHE(x) (((x) >> 29) & 0x1)
+#define C_000100_INVALIDATE_L2_CACHE 0xDFFFFFFF
+#define R_000102_MC_PT0_CONTEXT0_CNTL 0x000102
+#define S_000102_ENABLE_PAGE_TABLE(x) (((x) & 0x1) << 0)
+#define G_000102_ENABLE_PAGE_TABLE(x) (((x) >> 0) & 0x1)
+#define C_000102_ENABLE_PAGE_TABLE 0xFFFFFFFE
+#define S_000102_PAGE_TABLE_DEPTH(x) (((x) & 0x3) << 1)
+#define G_000102_PAGE_TABLE_DEPTH(x) (((x) >> 1) & 0x3)
+#define C_000102_PAGE_TABLE_DEPTH 0xFFFFFFF9
+#define V_000102_PAGE_TABLE_FLAT 0
+/* R600 documentation suggest that this should be a number of pages */
+#define R_000112_MC_PT0_SYSTEM_APERTURE_LOW_ADDR 0x000112
+#define R_000114_MC_PT0_SYSTEM_APERTURE_HIGH_ADDR 0x000114
+#define R_00011C_MC_PT0_CONTEXT0_DEFAULT_READ_ADDR 0x00011C
+#define R_00012C_MC_PT0_CONTEXT0_FLAT_BASE_ADDR 0x00012C
+#define R_00013C_MC_PT0_CONTEXT0_FLAT_START_ADDR 0x00013C
+#define R_00014C_MC_PT0_CONTEXT0_FLAT_END_ADDR 0x00014C
+#define R_00016C_MC_PT0_CLIENT0_CNTL 0x00016C
+#define S_00016C_ENABLE_TRANSLATION_MODE_OVERRIDE(x) (((x) & 0x1) << 0)
+#define G_00016C_ENABLE_TRANSLATION_MODE_OVERRIDE(x) (((x) >> 0) & 0x1)
+#define C_00016C_ENABLE_TRANSLATION_MODE_OVERRIDE 0xFFFFFFFE
+#define S_00016C_TRANSLATION_MODE_OVERRIDE(x) (((x) & 0x1) << 1)
+#define G_00016C_TRANSLATION_MODE_OVERRIDE(x) (((x) >> 1) & 0x1)
+#define C_00016C_TRANSLATION_MODE_OVERRIDE 0xFFFFFFFD
+#define S_00016C_SYSTEM_ACCESS_MODE_MASK(x) (((x) & 0x3) << 8)
+#define G_00016C_SYSTEM_ACCESS_MODE_MASK(x) (((x) >> 8) & 0x3)
+#define C_00016C_SYSTEM_ACCESS_MODE_MASK 0xFFFFFCFF
+#define V_00016C_SYSTEM_ACCESS_MODE_PA_ONLY 0
+#define V_00016C_SYSTEM_ACCESS_MODE_USE_SYS_MAP 1
+#define V_00016C_SYSTEM_ACCESS_MODE_IN_SYS 2
+#define V_00016C_SYSTEM_ACCESS_MODE_NOT_IN_SYS 3
+#define S_00016C_SYSTEM_APERTURE_UNMAPPED_ACCESS(x) (((x) & 0x1) << 10)
+#define G_00016C_SYSTEM_APERTURE_UNMAPPED_ACCESS(x) (((x) >> 10) & 0x1)
+#define C_00016C_SYSTEM_APERTURE_UNMAPPED_ACCESS 0xFFFFFBFF
+#define V_00016C_SYSTEM_APERTURE_UNMAPPED_PASSTHROUGH 0
+#define V_00016C_SYSTEM_APERTURE_UNMAPPED_DEFAULT_PAGE 1
+#define S_00016C_EFFECTIVE_L1_CACHE_SIZE(x) (((x) & 0x7) << 11)
+#define G_00016C_EFFECTIVE_L1_CACHE_SIZE(x) (((x) >> 11) & 0x7)
+#define C_00016C_EFFECTIVE_L1_CACHE_SIZE 0xFFFFC7FF
+#define S_00016C_ENABLE_FRAGMENT_PROCESSING(x) (((x) & 0x1) << 14)
+#define G_00016C_ENABLE_FRAGMENT_PROCESSING(x) (((x) >> 14) & 0x1)
+#define C_00016C_ENABLE_FRAGMENT_PROCESSING 0xFFFFBFFF
+#define S_00016C_EFFECTIVE_L1_QUEUE_SIZE(x) (((x) & 0x7) << 15)
+#define G_00016C_EFFECTIVE_L1_QUEUE_SIZE(x) (((x) >> 15) & 0x7)
+#define C_00016C_EFFECTIVE_L1_QUEUE_SIZE 0xFFFC7FFF
+#define S_00016C_INVALIDATE_L1_TLB(x) (((x) & 0x1) << 20)
+#define G_00016C_INVALIDATE_L1_TLB(x) (((x) >> 20) & 0x1)
+#define C_00016C_INVALIDATE_L1_TLB 0xFFEFFFFF
+
+#endif
* Jerome Glisse
*/
#include "drmP.h"
-#include "radeon_reg.h"
#include "radeon.h"
-#include "rs690r.h"
#include "atom.h"
-#include "atom-bits.h"
-
-/* rs690,rs740 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r300_mc_wait_for_idle(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs400_gart_disable(struct radeon_device *rdev);
-int rs400_gart_enable(struct radeon_device *rdev);
-void rs400_gart_adjust_size(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-
-/* This files gather functions specifics to :
- * rs690,rs740
- *
- * Some of these functions might be used by newer ASICs.
- */
-void rs690_gpu_init(struct radeon_device *rdev);
-int rs690_mc_wait_for_idle(struct radeon_device *rdev);
-
+#include "rs690d.h"
-/*
- * MC functions.
- */
-int rs690_mc_init(struct radeon_device *rdev)
-{
- uint32_t tmp;
- int r;
-
- if (r100_debugfs_rbbm_init(rdev)) {
- DRM_ERROR("Failed to register debugfs file for RBBM !\n");
- }
-
- rs690_gpu_init(rdev);
- rs400_gart_disable(rdev);
-
- /* Setup GPU memory space */
- rdev->mc.gtt_location = rdev->mc.mc_vram_size;
- rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
- rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
- rdev->mc.vram_location = 0xFFFFFFFFUL;
- r = radeon_mc_setup(rdev);
- if (r) {
- return r;
- }
-
- /* Program GPU memory space */
- rs600_mc_disable_clients(rdev);
- if (rs690_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
- }
- tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
- tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16);
- tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp);
- /* FIXME: Does this reg exist on RS480,RS740 ? */
- WREG32(0x310, rdev->mc.vram_location);
- WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
- return 0;
-}
-
-void rs690_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
-int rs690_mc_wait_for_idle(struct radeon_device *rdev)
+static int rs690_mc_wait_for_idle(struct radeon_device *rdev)
{
unsigned i;
uint32_t tmp;
for (i = 0; i < rdev->usec_timeout; i++) {
/* read MC_STATUS */
- tmp = RREG32_MC(RS690_MC_STATUS);
- if (tmp & RS690_MC_STATUS_IDLE) {
+ tmp = RREG32_MC(R_000090_MC_SYSTEM_STATUS);
+ if (G_000090_MC_SYSTEM_IDLE(tmp))
return 0;
- }
- DRM_UDELAY(1);
+ udelay(1);
}
return -1;
}
-void rs690_errata(struct radeon_device *rdev)
-{
- rdev->pll_errata = 0;
-}
-
-void rs690_gpu_init(struct radeon_device *rdev)
+static void rs690_gpu_init(struct radeon_device *rdev)
{
/* FIXME: HDP same place on rs690 ? */
r100_hdp_reset(rdev);
- rs600_disable_vga(rdev);
/* FIXME: is this correct ? */
r420_pipes_init(rdev);
if (rs690_mc_wait_for_idle(rdev)) {
}
}
-
-/*
- * VRAM info.
- */
void rs690_pm_info(struct radeon_device *rdev)
{
int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
/*
* Line Buffer Setup
* There is a single line buffer shared by both display controllers.
- * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
+ * R_006520_DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
* the display controllers. The paritioning can either be done
* manually or via one of four preset allocations specified in bits 1:0:
* 0 - line buffer is divided in half and shared between crtc
* 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
* 2 - D1 gets the whole buffer
* 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
- * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual
+ * Setting bit 2 of R_006520_DC_LB_MEMORY_SPLIT controls switches to manual
* allocation mode. In manual allocation mode, D1 always starts at 0,
* D1 end/2 is specified in bits 14:4; D2 allocation follows D1.
*/
- tmp = RREG32(DC_LB_MEMORY_SPLIT) & ~DC_LB_MEMORY_SPLIT_MASK;
- tmp &= ~DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+ tmp = RREG32(R_006520_DC_LB_MEMORY_SPLIT) & C_006520_DC_LB_MEMORY_SPLIT;
+ tmp &= ~C_006520_DC_LB_MEMORY_SPLIT_MODE;
/* auto */
if (mode1 && mode2) {
if (mode1->hdisplay > mode2->hdisplay) {
if (mode1->hdisplay > 2560)
- tmp |= DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
+ tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
else
- tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
} else if (mode2->hdisplay > mode1->hdisplay) {
if (mode2->hdisplay > 2560)
- tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+ tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
else
- tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
} else
- tmp |= AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+ tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
} else if (mode1) {
- tmp |= DC_LB_MEMORY_SPLIT_D1_ONLY;
+ tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_ONLY;
} else if (mode2) {
- tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+ tmp |= V_006520_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
}
- WREG32(DC_LB_MEMORY_SPLIT, tmp);
+ WREG32(R_006520_DC_LB_MEMORY_SPLIT, tmp);
}
struct rs690_watermark {
* option.
*/
if (rdev->disp_priority == 2) {
- tmp = RREG32_MC(MC_INIT_MISC_LAT_TIMER);
- tmp &= ~MC_DISP1R_INIT_LAT_MASK;
- tmp &= ~MC_DISP0R_INIT_LAT_MASK;
- if (mode1)
- tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+ tmp = RREG32_MC(R_000104_MC_INIT_MISC_LAT_TIMER);
+ tmp &= C_000104_MC_DISP0R_INIT_LAT;
+ tmp &= C_000104_MC_DISP1R_INIT_LAT;
if (mode0)
- tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
- WREG32_MC(MC_INIT_MISC_LAT_TIMER, tmp);
+ tmp |= S_000104_MC_DISP0R_INIT_LAT(1);
+ if (mode1)
+ tmp |= S_000104_MC_DISP1R_INIT_LAT(1);
+ WREG32_MC(R_000104_MC_INIT_MISC_LAT_TIMER, tmp);
}
rs690_line_buffer_adjust(rdev, mode0, mode1);
if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740))
- WREG32(DCP_CONTROL, 0);
+ WREG32(R_006C9C_DCP_CONTROL, 0);
if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880))
- WREG32(DCP_CONTROL, 2);
+ WREG32(R_006C9C_DCP_CONTROL, 2);
rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
tmp = (wm0.lb_request_fifo_depth - 1);
tmp |= (wm1.lb_request_fifo_depth - 1) << 16;
- WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+ WREG32(R_006D58_LB_MAX_REQ_OUTSTANDING, tmp);
if (mode0 && mode1) {
if (rfixed_trunc(wm0.dbpp) > 64)
priority_mark12.full = 0;
if (wm1.priority_mark_max.full > priority_mark12.full)
priority_mark12.full = wm1.priority_mark_max.full;
- WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
- WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
- WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
- WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ WREG32(R_006548_D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
} else if (mode0) {
if (rfixed_trunc(wm0.dbpp) > 64)
a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
priority_mark02.full = 0;
if (wm0.priority_mark_max.full > priority_mark02.full)
priority_mark02.full = wm0.priority_mark_max.full;
- WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
- WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
- WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
- WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+ WREG32(R_006548_D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+ WREG32(R_00654C_D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+ WREG32(R_006D48_D2MODE_PRIORITY_A_CNT,
+ S_006D48_D2MODE_PRIORITY_A_OFF(1));
+ WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT,
+ S_006D4C_D2MODE_PRIORITY_B_OFF(1));
} else {
if (rfixed_trunc(wm1.dbpp) > 64)
a.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
priority_mark12.full = 0;
if (wm1.priority_mark_max.full > priority_mark12.full)
priority_mark12.full = wm1.priority_mark_max.full;
- WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
- WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
- WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
- WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+ WREG32(R_006548_D1MODE_PRIORITY_A_CNT,
+ S_006548_D1MODE_PRIORITY_A_OFF(1));
+ WREG32(R_00654C_D1MODE_PRIORITY_B_CNT,
+ S_00654C_D1MODE_PRIORITY_B_OFF(1));
+ WREG32(R_006D48_D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+ WREG32(R_006D4C_D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
}
}
-/*
- * Indirect registers accessor
- */
uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg)
{
uint32_t r;
- WREG32(RS690_MC_INDEX, (reg & RS690_MC_INDEX_MASK));
- r = RREG32(RS690_MC_DATA);
- WREG32(RS690_MC_INDEX, RS690_MC_INDEX_MASK);
+ WREG32(R_000078_MC_INDEX, S_000078_MC_IND_ADDR(reg));
+ r = RREG32(R_00007C_MC_DATA);
+ WREG32(R_000078_MC_INDEX, ~C_000078_MC_IND_ADDR);
return r;
}
void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
{
- WREG32(RS690_MC_INDEX,
- RS690_MC_INDEX_WR_EN | ((reg) & RS690_MC_INDEX_MASK));
- WREG32(RS690_MC_DATA, v);
- WREG32(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK);
+ WREG32(R_000078_MC_INDEX, S_000078_MC_IND_ADDR(reg) |
+ S_000078_MC_IND_WR_EN(1));
+ WREG32(R_00007C_MC_DATA, v);
+ WREG32(R_000078_MC_INDEX, 0x7F);
+}
+
+void rs690_mc_program(struct radeon_device *rdev)
+{
+ struct rv515_mc_save save;
+
+ /* Stops all mc clients */
+ rv515_mc_stop(rdev, &save);
+
+ /* Wait for mc idle */
+ if (rs690_mc_wait_for_idle(rdev))
+ dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+ /* Program MC, should be a 32bits limited address space */
+ WREG32_MC(R_000100_MCCFG_FB_LOCATION,
+ S_000100_MC_FB_START(rdev->mc.vram_start >> 16) |
+ S_000100_MC_FB_TOP(rdev->mc.vram_end >> 16));
+ WREG32(R_000134_HDP_FB_LOCATION,
+ S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+
+ rv515_mc_resume(rdev, &save);
+}
+
+static int rs690_startup(struct radeon_device *rdev)
+{
+ int r;
+
+ rs690_mc_program(rdev);
+ /* Resume clock */
+ rv515_clock_startup(rdev);
+ /* Initialize GPU configuration (# pipes, ...) */
+ rs690_gpu_init(rdev);
+ /* Initialize GART (initialize after TTM so we can allocate
+ * memory through TTM but finalize after TTM) */
+ r = rs400_gart_enable(rdev);
+ if (r)
+ return r;
+ /* Enable IRQ */
+ rdev->irq.sw_int = true;
+ rs600_irq_set(rdev);
+ /* 1M ring buffer */
+ r = r100_cp_init(rdev, 1024 * 1024);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+ return r;
+ }
+ r = r100_wb_init(rdev);
+ if (r)
+ dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+ r = r100_ib_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+ return r;
+ }
+ return 0;
+}
+
+int rs690_resume(struct radeon_device *rdev)
+{
+ /* Make sur GART are not working */
+ rs400_gart_disable(rdev);
+ /* Resume clock before doing reset */
+ rv515_clock_startup(rdev);
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* post */
+ atom_asic_init(rdev->mode_info.atom_context);
+ /* Resume clock after posting */
+ rv515_clock_startup(rdev);
+ return rs690_startup(rdev);
+}
+
+int rs690_suspend(struct radeon_device *rdev)
+{
+ r100_cp_disable(rdev);
+ r100_wb_disable(rdev);
+ rs600_irq_disable(rdev);
+ rs400_gart_disable(rdev);
+ return 0;
+}
+
+void rs690_fini(struct radeon_device *rdev)
+{
+ rs690_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ radeon_gem_fini(rdev);
+ rs400_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ radeon_fence_driver_fini(rdev);
+ radeon_object_fini(rdev);
+ radeon_atombios_fini(rdev);
+ kfree(rdev->bios);
+ rdev->bios = NULL;
+}
+
+int rs690_init(struct radeon_device *rdev)
+{
+ int r;
+
+ /* Disable VGA */
+ rv515_vga_render_disable(rdev);
+ /* Initialize scratch registers */
+ radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
+ /* TODO: disable VGA need to use VGA request */
+ /* BIOS*/
+ if (!radeon_get_bios(rdev)) {
+ if (ASIC_IS_AVIVO(rdev))
+ return -EINVAL;
+ }
+ if (rdev->is_atom_bios) {
+ r = radeon_atombios_init(rdev);
+ if (r)
+ return r;
+ } else {
+ dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+ return -EINVAL;
+ }
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev,
+ "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* check if cards are posted or not */
+ if (!radeon_card_posted(rdev) && rdev->bios) {
+ DRM_INFO("GPU not posted. posting now...\n");
+ atom_asic_init(rdev->mode_info.atom_context);
+ }
+ /* Initialize clocks */
+ radeon_get_clock_info(rdev->ddev);
+ /* Get vram informations */
+ rs690_vram_info(rdev);
+ /* Initialize memory controller (also test AGP) */
+ r = r420_mc_init(rdev);
+ if (r)
+ return r;
+ rv515_debugfs(rdev);
+ /* Fence driver */
+ r = radeon_fence_driver_init(rdev);
+ if (r)
+ return r;
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ /* Memory manager */
+ r = radeon_object_init(rdev);
+ if (r)
+ return r;
+ r = rs400_gart_init(rdev);
+ if (r)
+ return r;
+ rs600_set_safe_registers(rdev);
+ rdev->accel_working = true;
+ r = rs690_startup(rdev);
+ if (r) {
+ /* Somethings want wront with the accel init stop accel */
+ dev_err(rdev->dev, "Disabling GPU acceleration\n");
+ rs690_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ rs400_gart_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ rdev->accel_working = false;
+ }
+ return 0;
}
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RS690D_H__
+#define __RS690D_H__
+
+/* Registers */
+#define R_000078_MC_INDEX 0x000078
+#define S_000078_MC_IND_ADDR(x) (((x) & 0x1FF) << 0)
+#define G_000078_MC_IND_ADDR(x) (((x) >> 0) & 0x1FF)
+#define C_000078_MC_IND_ADDR 0xFFFFFE00
+#define S_000078_MC_IND_WR_EN(x) (((x) & 0x1) << 9)
+#define G_000078_MC_IND_WR_EN(x) (((x) >> 9) & 0x1)
+#define C_000078_MC_IND_WR_EN 0xFFFFFDFF
+#define R_00007C_MC_DATA 0x00007C
+#define S_00007C_MC_DATA(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_00007C_MC_DATA(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_00007C_MC_DATA 0x00000000
+#define R_0000F8_CONFIG_MEMSIZE 0x0000F8
+#define S_0000F8_CONFIG_MEMSIZE(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0000F8_CONFIG_MEMSIZE(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0000F8_CONFIG_MEMSIZE 0x00000000
+#define R_000134_HDP_FB_LOCATION 0x000134
+#define S_000134_HDP_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000134_HDP_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000134_HDP_FB_START 0xFFFF0000
+#define R_0007C0_CP_STAT 0x0007C0
+#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0)
+#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1)
+#define C_0007C0_MRU_BUSY 0xFFFFFFFE
+#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1)
+#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1)
+#define C_0007C0_MWU_BUSY 0xFFFFFFFD
+#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2)
+#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1)
+#define C_0007C0_RSIU_BUSY 0xFFFFFFFB
+#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3)
+#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1)
+#define C_0007C0_RCIU_BUSY 0xFFFFFFF7
+#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9)
+#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1)
+#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF
+#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10)
+#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1)
+#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF
+#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11)
+#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1)
+#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF
+#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12)
+#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1)
+#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF
+#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13)
+#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1)
+#define C_0007C0_CSI_BUSY 0xFFFFDFFF
+#define S_0007C0_CSF_INDIRECT2_BUSY(x) (((x) & 0x1) << 14)
+#define G_0007C0_CSF_INDIRECT2_BUSY(x) (((x) >> 14) & 0x1)
+#define C_0007C0_CSF_INDIRECT2_BUSY 0xFFFFBFFF
+#define S_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) & 0x1) << 15)
+#define G_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) >> 15) & 0x1)
+#define C_0007C0_CSQ_INDIRECT2_BUSY 0xFFFF7FFF
+#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28)
+#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1)
+#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF
+#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29)
+#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1)
+#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF
+#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30)
+#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1)
+#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF
+#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31)
+#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1)
+#define C_0007C0_CP_BUSY 0x7FFFFFFF
+#define R_000E40_RBBM_STATUS 0x000E40
+#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0)
+#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F)
+#define C_000E40_CMDFIFO_AVAIL 0xFFFFFF80
+#define S_000E40_HIRQ_ON_RBB(x) (((x) & 0x1) << 8)
+#define G_000E40_HIRQ_ON_RBB(x) (((x) >> 8) & 0x1)
+#define C_000E40_HIRQ_ON_RBB 0xFFFFFEFF
+#define S_000E40_CPRQ_ON_RBB(x) (((x) & 0x1) << 9)
+#define G_000E40_CPRQ_ON_RBB(x) (((x) >> 9) & 0x1)
+#define C_000E40_CPRQ_ON_RBB 0xFFFFFDFF
+#define S_000E40_CFRQ_ON_RBB(x) (((x) & 0x1) << 10)
+#define G_000E40_CFRQ_ON_RBB(x) (((x) >> 10) & 0x1)
+#define C_000E40_CFRQ_ON_RBB 0xFFFFFBFF
+#define S_000E40_HIRQ_IN_RTBUF(x) (((x) & 0x1) << 11)
+#define G_000E40_HIRQ_IN_RTBUF(x) (((x) >> 11) & 0x1)
+#define C_000E40_HIRQ_IN_RTBUF 0xFFFFF7FF
+#define S_000E40_CPRQ_IN_RTBUF(x) (((x) & 0x1) << 12)
+#define G_000E40_CPRQ_IN_RTBUF(x) (((x) >> 12) & 0x1)
+#define C_000E40_CPRQ_IN_RTBUF 0xFFFFEFFF
+#define S_000E40_CFRQ_IN_RTBUF(x) (((x) & 0x1) << 13)
+#define G_000E40_CFRQ_IN_RTBUF(x) (((x) >> 13) & 0x1)
+#define C_000E40_CFRQ_IN_RTBUF 0xFFFFDFFF
+#define S_000E40_CF_PIPE_BUSY(x) (((x) & 0x1) << 14)
+#define G_000E40_CF_PIPE_BUSY(x) (((x) >> 14) & 0x1)
+#define C_000E40_CF_PIPE_BUSY 0xFFFFBFFF
+#define S_000E40_ENG_EV_BUSY(x) (((x) & 0x1) << 15)
+#define G_000E40_ENG_EV_BUSY(x) (((x) >> 15) & 0x1)
+#define C_000E40_ENG_EV_BUSY 0xFFFF7FFF
+#define S_000E40_CP_CMDSTRM_BUSY(x) (((x) & 0x1) << 16)
+#define G_000E40_CP_CMDSTRM_BUSY(x) (((x) >> 16) & 0x1)
+#define C_000E40_CP_CMDSTRM_BUSY 0xFFFEFFFF
+#define S_000E40_E2_BUSY(x) (((x) & 0x1) << 17)
+#define G_000E40_E2_BUSY(x) (((x) >> 17) & 0x1)
+#define C_000E40_E2_BUSY 0xFFFDFFFF
+#define S_000E40_RB2D_BUSY(x) (((x) & 0x1) << 18)
+#define G_000E40_RB2D_BUSY(x) (((x) >> 18) & 0x1)
+#define C_000E40_RB2D_BUSY 0xFFFBFFFF
+#define S_000E40_RB3D_BUSY(x) (((x) & 0x1) << 19)
+#define G_000E40_RB3D_BUSY(x) (((x) >> 19) & 0x1)
+#define C_000E40_RB3D_BUSY 0xFFF7FFFF
+#define S_000E40_VAP_BUSY(x) (((x) & 0x1) << 20)
+#define G_000E40_VAP_BUSY(x) (((x) >> 20) & 0x1)
+#define C_000E40_VAP_BUSY 0xFFEFFFFF
+#define S_000E40_RE_BUSY(x) (((x) & 0x1) << 21)
+#define G_000E40_RE_BUSY(x) (((x) >> 21) & 0x1)
+#define C_000E40_RE_BUSY 0xFFDFFFFF
+#define S_000E40_TAM_BUSY(x) (((x) & 0x1) << 22)
+#define G_000E40_TAM_BUSY(x) (((x) >> 22) & 0x1)
+#define C_000E40_TAM_BUSY 0xFFBFFFFF
+#define S_000E40_TDM_BUSY(x) (((x) & 0x1) << 23)
+#define G_000E40_TDM_BUSY(x) (((x) >> 23) & 0x1)
+#define C_000E40_TDM_BUSY 0xFF7FFFFF
+#define S_000E40_PB_BUSY(x) (((x) & 0x1) << 24)
+#define G_000E40_PB_BUSY(x) (((x) >> 24) & 0x1)
+#define C_000E40_PB_BUSY 0xFEFFFFFF
+#define S_000E40_TIM_BUSY(x) (((x) & 0x1) << 25)
+#define G_000E40_TIM_BUSY(x) (((x) >> 25) & 0x1)
+#define C_000E40_TIM_BUSY 0xFDFFFFFF
+#define S_000E40_GA_BUSY(x) (((x) & 0x1) << 26)
+#define G_000E40_GA_BUSY(x) (((x) >> 26) & 0x1)
+#define C_000E40_GA_BUSY 0xFBFFFFFF
+#define S_000E40_CBA2D_BUSY(x) (((x) & 0x1) << 27)
+#define G_000E40_CBA2D_BUSY(x) (((x) >> 27) & 0x1)
+#define C_000E40_CBA2D_BUSY 0xF7FFFFFF
+#define S_000E40_GUI_ACTIVE(x) (((x) & 0x1) << 31)
+#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1)
+#define C_000E40_GUI_ACTIVE 0x7FFFFFFF
+#define R_006520_DC_LB_MEMORY_SPLIT 0x006520
+#define S_006520_DC_LB_MEMORY_SPLIT(x) (((x) & 0x3) << 0)
+#define G_006520_DC_LB_MEMORY_SPLIT(x) (((x) >> 0) & 0x3)
+#define C_006520_DC_LB_MEMORY_SPLIT 0xFFFFFFFC
+#define S_006520_DC_LB_MEMORY_SPLIT_MODE(x) (((x) & 0x1) << 2)
+#define G_006520_DC_LB_MEMORY_SPLIT_MODE(x) (((x) >> 2) & 0x1)
+#define C_006520_DC_LB_MEMORY_SPLIT_MODE 0xFFFFFFFB
+#define V_006520_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF 0
+#define V_006520_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q 1
+#define V_006520_DC_LB_MEMORY_SPLIT_D1_ONLY 2
+#define V_006520_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q 3
+#define S_006520_DC_LB_DISP1_END_ADR(x) (((x) & 0x7FF) << 4)
+#define G_006520_DC_LB_DISP1_END_ADR(x) (((x) >> 4) & 0x7FF)
+#define C_006520_DC_LB_DISP1_END_ADR 0xFFFF800F
+#define R_006548_D1MODE_PRIORITY_A_CNT 0x006548
+#define S_006548_D1MODE_PRIORITY_MARK_A(x) (((x) & 0x7FFF) << 0)
+#define G_006548_D1MODE_PRIORITY_MARK_A(x) (((x) >> 0) & 0x7FFF)
+#define C_006548_D1MODE_PRIORITY_MARK_A 0xFFFF8000
+#define S_006548_D1MODE_PRIORITY_A_OFF(x) (((x) & 0x1) << 16)
+#define G_006548_D1MODE_PRIORITY_A_OFF(x) (((x) >> 16) & 0x1)
+#define C_006548_D1MODE_PRIORITY_A_OFF 0xFFFEFFFF
+#define S_006548_D1MODE_PRIORITY_A_FORCE_MASK(x) (((x) & 0x1) << 24)
+#define G_006548_D1MODE_PRIORITY_A_FORCE_MASK(x) (((x) >> 24) & 0x1)
+#define C_006548_D1MODE_PRIORITY_A_FORCE_MASK 0xFEFFFFFF
+#define R_00654C_D1MODE_PRIORITY_B_CNT 0x00654C
+#define S_00654C_D1MODE_PRIORITY_MARK_B(x) (((x) & 0x7FFF) << 0)
+#define G_00654C_D1MODE_PRIORITY_MARK_B(x) (((x) >> 0) & 0x7FFF)
+#define C_00654C_D1MODE_PRIORITY_MARK_B 0xFFFF8000
+#define S_00654C_D1MODE_PRIORITY_B_OFF(x) (((x) & 0x1) << 16)
+#define G_00654C_D1MODE_PRIORITY_B_OFF(x) (((x) >> 16) & 0x1)
+#define C_00654C_D1MODE_PRIORITY_B_OFF 0xFFFEFFFF
+#define S_00654C_D1MODE_PRIORITY_B_ALWAYS_ON(x) (((x) & 0x1) << 20)
+#define G_00654C_D1MODE_PRIORITY_B_ALWAYS_ON(x) (((x) >> 20) & 0x1)
+#define C_00654C_D1MODE_PRIORITY_B_ALWAYS_ON 0xFFEFFFFF
+#define S_00654C_D1MODE_PRIORITY_B_FORCE_MASK(x) (((x) & 0x1) << 24)
+#define G_00654C_D1MODE_PRIORITY_B_FORCE_MASK(x) (((x) >> 24) & 0x1)
+#define C_00654C_D1MODE_PRIORITY_B_FORCE_MASK 0xFEFFFFFF
+#define R_006C9C_DCP_CONTROL 0x006C9C
+#define R_006D48_D2MODE_PRIORITY_A_CNT 0x006D48
+#define S_006D48_D2MODE_PRIORITY_MARK_A(x) (((x) & 0x7FFF) << 0)
+#define G_006D48_D2MODE_PRIORITY_MARK_A(x) (((x) >> 0) & 0x7FFF)
+#define C_006D48_D2MODE_PRIORITY_MARK_A 0xFFFF8000
+#define S_006D48_D2MODE_PRIORITY_A_OFF(x) (((x) & 0x1) << 16)
+#define G_006D48_D2MODE_PRIORITY_A_OFF(x) (((x) >> 16) & 0x1)
+#define C_006D48_D2MODE_PRIORITY_A_OFF 0xFFFEFFFF
+#define S_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(x) (((x) & 0x1) << 20)
+#define G_006D48_D2MODE_PRIORITY_A_ALWAYS_ON(x) (((x) >> 20) & 0x1)
+#define C_006D48_D2MODE_PRIORITY_A_ALWAYS_ON 0xFFEFFFFF
+#define S_006D48_D2MODE_PRIORITY_A_FORCE_MASK(x) (((x) & 0x1) << 24)
+#define G_006D48_D2MODE_PRIORITY_A_FORCE_MASK(x) (((x) >> 24) & 0x1)
+#define C_006D48_D2MODE_PRIORITY_A_FORCE_MASK 0xFEFFFFFF
+#define R_006D4C_D2MODE_PRIORITY_B_CNT 0x006D4C
+#define S_006D4C_D2MODE_PRIORITY_MARK_B(x) (((x) & 0x7FFF) << 0)
+#define G_006D4C_D2MODE_PRIORITY_MARK_B(x) (((x) >> 0) & 0x7FFF)
+#define C_006D4C_D2MODE_PRIORITY_MARK_B 0xFFFF8000
+#define S_006D4C_D2MODE_PRIORITY_B_OFF(x) (((x) & 0x1) << 16)
+#define G_006D4C_D2MODE_PRIORITY_B_OFF(x) (((x) >> 16) & 0x1)
+#define C_006D4C_D2MODE_PRIORITY_B_OFF 0xFFFEFFFF
+#define S_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON(x) (((x) & 0x1) << 20)
+#define G_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON(x) (((x) >> 20) & 0x1)
+#define C_006D4C_D2MODE_PRIORITY_B_ALWAYS_ON 0xFFEFFFFF
+#define S_006D4C_D2MODE_PRIORITY_B_FORCE_MASK(x) (((x) & 0x1) << 24)
+#define G_006D4C_D2MODE_PRIORITY_B_FORCE_MASK(x) (((x) >> 24) & 0x1)
+#define C_006D4C_D2MODE_PRIORITY_B_FORCE_MASK 0xFEFFFFFF
+#define R_006D58_LB_MAX_REQ_OUTSTANDING 0x006D58
+#define S_006D58_LB_D1_MAX_REQ_OUTSTANDING(x) (((x) & 0xF) << 0)
+#define G_006D58_LB_D1_MAX_REQ_OUTSTANDING(x) (((x) >> 0) & 0xF)
+#define C_006D58_LB_D1_MAX_REQ_OUTSTANDING 0xFFFFFFF0
+#define S_006D58_LB_D2_MAX_REQ_OUTSTANDING(x) (((x) & 0xF) << 16)
+#define G_006D58_LB_D2_MAX_REQ_OUTSTANDING(x) (((x) >> 16) & 0xF)
+#define C_006D58_LB_D2_MAX_REQ_OUTSTANDING 0xFFF0FFFF
+
+
+#define R_000090_MC_SYSTEM_STATUS 0x000090
+#define S_000090_MC_SYSTEM_IDLE(x) (((x) & 0x1) << 0)
+#define G_000090_MC_SYSTEM_IDLE(x) (((x) >> 0) & 0x1)
+#define C_000090_MC_SYSTEM_IDLE 0xFFFFFFFE
+#define S_000090_MC_SEQUENCER_IDLE(x) (((x) & 0x1) << 1)
+#define G_000090_MC_SEQUENCER_IDLE(x) (((x) >> 1) & 0x1)
+#define C_000090_MC_SEQUENCER_IDLE 0xFFFFFFFD
+#define S_000090_MC_ARBITER_IDLE(x) (((x) & 0x1) << 2)
+#define G_000090_MC_ARBITER_IDLE(x) (((x) >> 2) & 0x1)
+#define C_000090_MC_ARBITER_IDLE 0xFFFFFFFB
+#define S_000090_MC_SELECT_PM(x) (((x) & 0x1) << 3)
+#define G_000090_MC_SELECT_PM(x) (((x) >> 3) & 0x1)
+#define C_000090_MC_SELECT_PM 0xFFFFFFF7
+#define S_000090_RESERVED4(x) (((x) & 0xF) << 4)
+#define G_000090_RESERVED4(x) (((x) >> 4) & 0xF)
+#define C_000090_RESERVED4 0xFFFFFF0F
+#define S_000090_RESERVED8(x) (((x) & 0xF) << 8)
+#define G_000090_RESERVED8(x) (((x) >> 8) & 0xF)
+#define C_000090_RESERVED8 0xFFFFF0FF
+#define S_000090_RESERVED12(x) (((x) & 0xF) << 12)
+#define G_000090_RESERVED12(x) (((x) >> 12) & 0xF)
+#define C_000090_RESERVED12 0xFFFF0FFF
+#define S_000090_MCA_INIT_EXECUTED(x) (((x) & 0x1) << 16)
+#define G_000090_MCA_INIT_EXECUTED(x) (((x) >> 16) & 0x1)
+#define C_000090_MCA_INIT_EXECUTED 0xFFFEFFFF
+#define S_000090_MCA_IDLE(x) (((x) & 0x1) << 17)
+#define G_000090_MCA_IDLE(x) (((x) >> 17) & 0x1)
+#define C_000090_MCA_IDLE 0xFFFDFFFF
+#define S_000090_MCA_SEQ_IDLE(x) (((x) & 0x1) << 18)
+#define G_000090_MCA_SEQ_IDLE(x) (((x) >> 18) & 0x1)
+#define C_000090_MCA_SEQ_IDLE 0xFFFBFFFF
+#define S_000090_MCA_ARB_IDLE(x) (((x) & 0x1) << 19)
+#define G_000090_MCA_ARB_IDLE(x) (((x) >> 19) & 0x1)
+#define C_000090_MCA_ARB_IDLE 0xFFF7FFFF
+#define S_000090_RESERVED20(x) (((x) & 0xFFF) << 20)
+#define G_000090_RESERVED20(x) (((x) >> 20) & 0xFFF)
+#define C_000090_RESERVED20 0x000FFFFF
+#define R_000100_MCCFG_FB_LOCATION 0x000100
+#define S_000100_MC_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000100_MC_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000100_MC_FB_START 0xFFFF0000
+#define S_000100_MC_FB_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000100_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000100_MC_FB_TOP 0x0000FFFF
+#define R_000104_MC_INIT_MISC_LAT_TIMER 0x000104
+#define S_000104_MC_CPR_INIT_LAT(x) (((x) & 0xF) << 0)
+#define G_000104_MC_CPR_INIT_LAT(x) (((x) >> 0) & 0xF)
+#define C_000104_MC_CPR_INIT_LAT 0xFFFFFFF0
+#define S_000104_MC_VF_INIT_LAT(x) (((x) & 0xF) << 4)
+#define G_000104_MC_VF_INIT_LAT(x) (((x) >> 4) & 0xF)
+#define C_000104_MC_VF_INIT_LAT 0xFFFFFF0F
+#define S_000104_MC_DISP0R_INIT_LAT(x) (((x) & 0xF) << 8)
+#define G_000104_MC_DISP0R_INIT_LAT(x) (((x) >> 8) & 0xF)
+#define C_000104_MC_DISP0R_INIT_LAT 0xFFFFF0FF
+#define S_000104_MC_DISP1R_INIT_LAT(x) (((x) & 0xF) << 12)
+#define G_000104_MC_DISP1R_INIT_LAT(x) (((x) >> 12) & 0xF)
+#define C_000104_MC_DISP1R_INIT_LAT 0xFFFF0FFF
+#define S_000104_MC_FIXED_INIT_LAT(x) (((x) & 0xF) << 16)
+#define G_000104_MC_FIXED_INIT_LAT(x) (((x) >> 16) & 0xF)
+#define C_000104_MC_FIXED_INIT_LAT 0xFFF0FFFF
+#define S_000104_MC_E2R_INIT_LAT(x) (((x) & 0xF) << 20)
+#define G_000104_MC_E2R_INIT_LAT(x) (((x) >> 20) & 0xF)
+#define C_000104_MC_E2R_INIT_LAT 0xFF0FFFFF
+#define S_000104_SAME_PAGE_PRIO(x) (((x) & 0xF) << 24)
+#define G_000104_SAME_PAGE_PRIO(x) (((x) >> 24) & 0xF)
+#define C_000104_SAME_PAGE_PRIO 0xF0FFFFFF
+#define S_000104_MC_GLOBW_INIT_LAT(x) (((x) & 0xF) << 28)
+#define G_000104_MC_GLOBW_INIT_LAT(x) (((x) >> 28) & 0xF)
+#define C_000104_MC_GLOBW_INIT_LAT 0x0FFFFFFF
+
+#endif
+++ /dev/null
-/*
- * Copyright 2008 Advanced Micro Devices, Inc.
- * Copyright 2008 Red Hat Inc.
- * Copyright 2009 Jerome Glisse.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
- * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
- * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- *
- * Authors: Dave Airlie
- * Alex Deucher
- * Jerome Glisse
- */
-#ifndef RS690R_H
-#define RS690R_H
-
-/* RS690/RS740 registers */
-#define MC_INDEX 0x0078
-# define MC_INDEX_MASK 0x1FF
-# define MC_INDEX_WR_EN (1 << 9)
-# define MC_INDEX_WR_ACK 0x7F
-#define MC_DATA 0x007C
-#define HDP_FB_LOCATION 0x0134
-#define DC_LB_MEMORY_SPLIT 0x6520
-#define DC_LB_MEMORY_SPLIT_MASK 0x00000003
-#define DC_LB_MEMORY_SPLIT_SHIFT 0
-#define DC_LB_MEMORY_SPLIT_D1HALF_D2HALF 0
-#define DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q 1
-#define DC_LB_MEMORY_SPLIT_D1_ONLY 2
-#define DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q 3
-#define DC_LB_MEMORY_SPLIT_SHIFT_MODE (1 << 2)
-#define DC_LB_DISP1_END_ADR_SHIFT 4
-#define DC_LB_DISP1_END_ADR_MASK 0x00007FF0
-#define D1MODE_PRIORITY_A_CNT 0x6548
-#define MODE_PRIORITY_MARK_MASK 0x00007FFF
-#define MODE_PRIORITY_OFF (1 << 16)
-#define MODE_PRIORITY_ALWAYS_ON (1 << 20)
-#define MODE_PRIORITY_FORCE_MASK (1 << 24)
-#define D1MODE_PRIORITY_B_CNT 0x654C
-#define LB_MAX_REQ_OUTSTANDING 0x6D58
-#define LB_D1_MAX_REQ_OUTSTANDING_MASK 0x0000000F
-#define LB_D1_MAX_REQ_OUTSTANDING_SHIFT 0
-#define LB_D2_MAX_REQ_OUTSTANDING_MASK 0x000F0000
-#define LB_D2_MAX_REQ_OUTSTANDING_SHIFT 16
-#define DCP_CONTROL 0x6C9C
-#define D2MODE_PRIORITY_A_CNT 0x6D48
-#define D2MODE_PRIORITY_B_CNT 0x6D4C
-
-/* MC indirect registers */
-#define MC_STATUS_IDLE (1 << 0)
-#define MC_MISC_CNTL 0x18
-#define DISABLE_GTW (1 << 1)
-#define GART_INDEX_REG_EN (1 << 12)
-#define BLOCK_GFX_D3_EN (1 << 14)
-#define GART_FEATURE_ID 0x2B
-#define HANG_EN (1 << 11)
-#define TLB_ENABLE (1 << 18)
-#define P2P_ENABLE (1 << 19)
-#define GTW_LAC_EN (1 << 25)
-#define LEVEL2_GART (0 << 30)
-#define LEVEL1_GART (1 << 30)
-#define PDC_EN (1 << 31)
-#define GART_BASE 0x2C
-#define GART_CACHE_CNTRL 0x2E
-# define GART_CACHE_INVALIDATE (1 << 0)
-#define MC_STATUS 0x90
-#define MCCFG_FB_LOCATION 0x100
-#define MC_FB_START_MASK 0x0000FFFF
-#define MC_FB_START_SHIFT 0
-#define MC_FB_TOP_MASK 0xFFFF0000
-#define MC_FB_TOP_SHIFT 16
-#define MCCFG_AGP_LOCATION 0x101
-#define MC_AGP_START_MASK 0x0000FFFF
-#define MC_AGP_START_SHIFT 0
-#define MC_AGP_TOP_MASK 0xFFFF0000
-#define MC_AGP_TOP_SHIFT 16
-#define MCCFG_AGP_BASE 0x102
-#define MCCFG_AGP_BASE_2 0x103
-#define MC_INIT_MISC_LAT_TIMER 0x104
-#define MC_DISP0R_INIT_LAT_SHIFT 8
-#define MC_DISP0R_INIT_LAT_MASK 0x00000F00
-#define MC_DISP1R_INIT_LAT_SHIFT 12
-#define MC_DISP1R_INIT_LAT_MASK 0x0000F000
-
-#endif
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RV200D_H__
+#define __RV200D_H__
+
+#define R_00015C_AGP_BASE_2 0x00015C
+#define S_00015C_AGP_BASE_ADDR_2(x) (((x) & 0xF) << 0)
+#define G_00015C_AGP_BASE_ADDR_2(x) (((x) >> 0) & 0xF)
+#define C_00015C_AGP_BASE_ADDR_2 0xFFFFFFF0
+
+#endif
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RV250D_H__
+#define __RV250D_H__
+
+#define R_00000D_SCLK_CNTL_M6 0x00000D
+#define S_00000D_SCLK_SRC_SEL(x) (((x) & 0x7) << 0)
+#define G_00000D_SCLK_SRC_SEL(x) (((x) >> 0) & 0x7)
+#define C_00000D_SCLK_SRC_SEL 0xFFFFFFF8
+#define S_00000D_CP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 3)
+#define G_00000D_CP_MAX_DYN_STOP_LAT(x) (((x) >> 3) & 0x1)
+#define C_00000D_CP_MAX_DYN_STOP_LAT 0xFFFFFFF7
+#define S_00000D_HDP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 4)
+#define G_00000D_HDP_MAX_DYN_STOP_LAT(x) (((x) >> 4) & 0x1)
+#define C_00000D_HDP_MAX_DYN_STOP_LAT 0xFFFFFFEF
+#define S_00000D_TV_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 5)
+#define G_00000D_TV_MAX_DYN_STOP_LAT(x) (((x) >> 5) & 0x1)
+#define C_00000D_TV_MAX_DYN_STOP_LAT 0xFFFFFFDF
+#define S_00000D_E2_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 6)
+#define G_00000D_E2_MAX_DYN_STOP_LAT(x) (((x) >> 6) & 0x1)
+#define C_00000D_E2_MAX_DYN_STOP_LAT 0xFFFFFFBF
+#define S_00000D_SE_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 7)
+#define G_00000D_SE_MAX_DYN_STOP_LAT(x) (((x) >> 7) & 0x1)
+#define C_00000D_SE_MAX_DYN_STOP_LAT 0xFFFFFF7F
+#define S_00000D_IDCT_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 8)
+#define G_00000D_IDCT_MAX_DYN_STOP_LAT(x) (((x) >> 8) & 0x1)
+#define C_00000D_IDCT_MAX_DYN_STOP_LAT 0xFFFFFEFF
+#define S_00000D_VIP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 9)
+#define G_00000D_VIP_MAX_DYN_STOP_LAT(x) (((x) >> 9) & 0x1)
+#define C_00000D_VIP_MAX_DYN_STOP_LAT 0xFFFFFDFF
+#define S_00000D_RE_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 10)
+#define G_00000D_RE_MAX_DYN_STOP_LAT(x) (((x) >> 10) & 0x1)
+#define C_00000D_RE_MAX_DYN_STOP_LAT 0xFFFFFBFF
+#define S_00000D_PB_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 11)
+#define G_00000D_PB_MAX_DYN_STOP_LAT(x) (((x) >> 11) & 0x1)
+#define C_00000D_PB_MAX_DYN_STOP_LAT 0xFFFFF7FF
+#define S_00000D_TAM_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 12)
+#define G_00000D_TAM_MAX_DYN_STOP_LAT(x) (((x) >> 12) & 0x1)
+#define C_00000D_TAM_MAX_DYN_STOP_LAT 0xFFFFEFFF
+#define S_00000D_TDM_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 13)
+#define G_00000D_TDM_MAX_DYN_STOP_LAT(x) (((x) >> 13) & 0x1)
+#define C_00000D_TDM_MAX_DYN_STOP_LAT 0xFFFFDFFF
+#define S_00000D_RB_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 14)
+#define G_00000D_RB_MAX_DYN_STOP_LAT(x) (((x) >> 14) & 0x1)
+#define C_00000D_RB_MAX_DYN_STOP_LAT 0xFFFFBFFF
+#define S_00000D_FORCE_DISP2(x) (((x) & 0x1) << 15)
+#define G_00000D_FORCE_DISP2(x) (((x) >> 15) & 0x1)
+#define C_00000D_FORCE_DISP2 0xFFFF7FFF
+#define S_00000D_FORCE_CP(x) (((x) & 0x1) << 16)
+#define G_00000D_FORCE_CP(x) (((x) >> 16) & 0x1)
+#define C_00000D_FORCE_CP 0xFFFEFFFF
+#define S_00000D_FORCE_HDP(x) (((x) & 0x1) << 17)
+#define G_00000D_FORCE_HDP(x) (((x) >> 17) & 0x1)
+#define C_00000D_FORCE_HDP 0xFFFDFFFF
+#define S_00000D_FORCE_DISP1(x) (((x) & 0x1) << 18)
+#define G_00000D_FORCE_DISP1(x) (((x) >> 18) & 0x1)
+#define C_00000D_FORCE_DISP1 0xFFFBFFFF
+#define S_00000D_FORCE_TOP(x) (((x) & 0x1) << 19)
+#define G_00000D_FORCE_TOP(x) (((x) >> 19) & 0x1)
+#define C_00000D_FORCE_TOP 0xFFF7FFFF
+#define S_00000D_FORCE_E2(x) (((x) & 0x1) << 20)
+#define G_00000D_FORCE_E2(x) (((x) >> 20) & 0x1)
+#define C_00000D_FORCE_E2 0xFFEFFFFF
+#define S_00000D_FORCE_SE(x) (((x) & 0x1) << 21)
+#define G_00000D_FORCE_SE(x) (((x) >> 21) & 0x1)
+#define C_00000D_FORCE_SE 0xFFDFFFFF
+#define S_00000D_FORCE_IDCT(x) (((x) & 0x1) << 22)
+#define G_00000D_FORCE_IDCT(x) (((x) >> 22) & 0x1)
+#define C_00000D_FORCE_IDCT 0xFFBFFFFF
+#define S_00000D_FORCE_VIP(x) (((x) & 0x1) << 23)
+#define G_00000D_FORCE_VIP(x) (((x) >> 23) & 0x1)
+#define C_00000D_FORCE_VIP 0xFF7FFFFF
+#define S_00000D_FORCE_RE(x) (((x) & 0x1) << 24)
+#define G_00000D_FORCE_RE(x) (((x) >> 24) & 0x1)
+#define C_00000D_FORCE_RE 0xFEFFFFFF
+#define S_00000D_FORCE_PB(x) (((x) & 0x1) << 25)
+#define G_00000D_FORCE_PB(x) (((x) >> 25) & 0x1)
+#define C_00000D_FORCE_PB 0xFDFFFFFF
+#define S_00000D_FORCE_TAM(x) (((x) & 0x1) << 26)
+#define G_00000D_FORCE_TAM(x) (((x) >> 26) & 0x1)
+#define C_00000D_FORCE_TAM 0xFBFFFFFF
+#define S_00000D_FORCE_TDM(x) (((x) & 0x1) << 27)
+#define G_00000D_FORCE_TDM(x) (((x) >> 27) & 0x1)
+#define C_00000D_FORCE_TDM 0xF7FFFFFF
+#define S_00000D_FORCE_RB(x) (((x) & 0x1) << 28)
+#define G_00000D_FORCE_RB(x) (((x) >> 28) & 0x1)
+#define C_00000D_FORCE_RB 0xEFFFFFFF
+#define S_00000D_FORCE_TV_SCLK(x) (((x) & 0x1) << 29)
+#define G_00000D_FORCE_TV_SCLK(x) (((x) >> 29) & 0x1)
+#define C_00000D_FORCE_TV_SCLK 0xDFFFFFFF
+#define S_00000D_FORCE_SUBPIC(x) (((x) & 0x1) << 30)
+#define G_00000D_FORCE_SUBPIC(x) (((x) >> 30) & 0x1)
+#define C_00000D_FORCE_SUBPIC 0xBFFFFFFF
+#define S_00000D_FORCE_OV0(x) (((x) & 0x1) << 31)
+#define G_00000D_FORCE_OV0(x) (((x) >> 31) & 0x1)
+#define C_00000D_FORCE_OV0 0x7FFFFFFF
+
+#endif
--- /dev/null
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ * Alex Deucher
+ * Jerome Glisse
+ */
+#ifndef __RV350D_H__
+#define __RV350D_H__
+
+/* RV350, RV380 registers */
+/* #define R_00000D_SCLK_CNTL 0x00000D */
+#define S_00000D_FORCE_VAP(x) (((x) & 0x1) << 21)
+#define G_00000D_FORCE_VAP(x) (((x) >> 21) & 0x1)
+#define C_00000D_FORCE_VAP 0xFFDFFFFF
+#define S_00000D_FORCE_SR(x) (((x) & 0x1) << 25)
+#define G_00000D_FORCE_SR(x) (((x) >> 25) & 0x1)
+#define C_00000D_FORCE_SR 0xFDFFFFFF
+#define S_00000D_FORCE_PX(x) (((x) & 0x1) << 26)
+#define G_00000D_FORCE_PX(x) (((x) >> 26) & 0x1)
+#define C_00000D_FORCE_PX 0xFBFFFFFF
+#define S_00000D_FORCE_TX(x) (((x) & 0x1) << 27)
+#define G_00000D_FORCE_TX(x) (((x) >> 27) & 0x1)
+#define C_00000D_FORCE_TX 0xF7FFFFFF
+#define S_00000D_FORCE_US(x) (((x) & 0x1) << 28)
+#define G_00000D_FORCE_US(x) (((x) >> 28) & 0x1)
+#define C_00000D_FORCE_US 0xEFFFFFFF
+#define S_00000D_FORCE_SU(x) (((x) & 0x1) << 30)
+#define G_00000D_FORCE_SU(x) (((x) >> 30) & 0x1)
+#define C_00000D_FORCE_SU 0xBFFFFFFF
+
+#endif
#include "drmP.h"
#include "rv515d.h"
#include "radeon.h"
-
+#include "atom.h"
#include "rv515_reg_safe.h"
-/* rv515 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r100_cp_reset(struct radeon_device *rdev);
-int r100_rb2d_reset(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-
-/* This files gather functions specifics to:
- * rv515
- *
- * Some of these functions might be used by newer ASICs.
- */
+
+/* This files gather functions specifics to: rv515 */
int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
void rv515_gpu_init(struct radeon_device *rdev);
int rv515_mc_wait_for_idle(struct radeon_device *rdev);
-
-/*
- * MC
- */
-int rv515_mc_init(struct radeon_device *rdev)
+void rv515_debugfs(struct radeon_device *rdev)
{
- uint32_t tmp;
- int r;
-
if (r100_debugfs_rbbm_init(rdev)) {
DRM_ERROR("Failed to register debugfs file for RBBM !\n");
}
if (rv515_debugfs_ga_info_init(rdev)) {
DRM_ERROR("Failed to register debugfs file for pipes !\n");
}
-
- rv515_gpu_init(rdev);
- rv370_pcie_gart_disable(rdev);
-
- /* Setup GPU memory space */
- rdev->mc.vram_location = 0xFFFFFFFFUL;
- rdev->mc.gtt_location = 0xFFFFFFFFUL;
- if (rdev->flags & RADEON_IS_AGP) {
- r = radeon_agp_init(rdev);
- if (r) {
- printk(KERN_WARNING "[drm] Disabling AGP\n");
- rdev->flags &= ~RADEON_IS_AGP;
- rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
- } else {
- rdev->mc.gtt_location = rdev->mc.agp_base;
- }
- }
- r = radeon_mc_setup(rdev);
- if (r) {
- return r;
- }
-
- /* Program GPU memory space */
- rs600_mc_disable_clients(rdev);
- if (rv515_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "Failed to wait MC idle while "
- "programming pipes. Bad things might happen.\n");
- }
- /* Write VRAM size in case we are limiting it */
- WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
- tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32(0x134, tmp);
- tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
- tmp = REG_SET(MC_FB_TOP, tmp >> 16);
- tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
- WREG32_MC(MC_FB_LOCATION, tmp);
- WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
- WREG32(0x310, rdev->mc.vram_location);
- if (rdev->flags & RADEON_IS_AGP) {
- tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
- tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
- tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
- WREG32_MC(MC_AGP_LOCATION, tmp);
- WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
- WREG32_MC(MC_AGP_BASE_2, 0);
- } else {
- WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
- WREG32_MC(MC_AGP_BASE, 0);
- WREG32_MC(MC_AGP_BASE_2, 0);
- }
- return 0;
-}
-
-void rv515_mc_fini(struct radeon_device *rdev)
-{
}
-
-/*
- * Global GPU functions
- */
void rv515_ring_start(struct radeon_device *rdev)
{
int r;
radeon_ring_unlock_commit(rdev);
}
-void rv515_errata(struct radeon_device *rdev)
-{
- rdev->pll_errata = 0;
-}
-
int rv515_mc_wait_for_idle(struct radeon_device *rdev)
{
unsigned i;
return -1;
}
+void rv515_vga_render_disable(struct radeon_device *rdev)
+{
+ WREG32(R_000300_VGA_RENDER_CONTROL,
+ RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL);
+}
+
void rv515_gpu_init(struct radeon_device *rdev)
{
unsigned pipe_select_current, gb_pipe_select, tmp;
"reseting GPU. Bad things might happen.\n");
}
- rs600_disable_vga(rdev);
+ rv515_vga_render_disable(rdev);
r420_pipes_init(rdev);
gb_pipe_select = RREG32(0x402C);
return 0;
}
-
-/*
- * VRAM info
- */
static void rv515_vram_get_type(struct radeon_device *rdev)
{
uint32_t tmp;
rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
}
-
-/*
- * Indirect registers accessor
- */
uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
{
uint32_t r;
WREG32(MC_IND_INDEX, 0);
}
-/*
- * Debugfs info
- */
#if defined(CONFIG_DEBUG_FS)
static int rv515_debugfs_pipes_info(struct seq_file *m, void *data)
{
#endif
}
-/*
- * Asic initialization
- */
-int rv515_init(struct radeon_device *rdev)
+void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save)
+{
+ save->d1vga_control = RREG32(R_000330_D1VGA_CONTROL);
+ save->d2vga_control = RREG32(R_000338_D2VGA_CONTROL);
+ save->vga_render_control = RREG32(R_000300_VGA_RENDER_CONTROL);
+ save->vga_hdp_control = RREG32(R_000328_VGA_HDP_CONTROL);
+ save->d1crtc_control = RREG32(R_006080_D1CRTC_CONTROL);
+ save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL);
+
+ /* Stop all video */
+ WREG32(R_000330_D1VGA_CONTROL, 0);
+ WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+ WREG32(R_000300_VGA_RENDER_CONTROL, 0);
+ WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
+ WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
+ WREG32(R_006080_D1CRTC_CONTROL, 0);
+ WREG32(R_006880_D2CRTC_CONTROL, 0);
+ WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
+ WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+}
+
+void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save)
+{
+ WREG32(R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+ WREG32(R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+ WREG32(R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+ WREG32(R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+ WREG32(R_000310_VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start);
+ /* Unlock host access */
+ WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control);
+ mdelay(1);
+ /* Restore video state */
+ WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
+ WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
+ WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control);
+ WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control);
+ WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
+ WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+ WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control);
+ WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control);
+ WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control);
+}
+
+void rv515_mc_program(struct radeon_device *rdev)
+{
+ struct rv515_mc_save save;
+
+ /* Stops all mc clients */
+ rv515_mc_stop(rdev, &save);
+
+ /* Wait for mc idle */
+ if (rv515_mc_wait_for_idle(rdev))
+ dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+ /* Write VRAM size in case we are limiting it */
+ WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+ /* Program MC, should be a 32bits limited address space */
+ WREG32_MC(R_000001_MC_FB_LOCATION,
+ S_000001_MC_FB_START(rdev->mc.vram_start >> 16) |
+ S_000001_MC_FB_TOP(rdev->mc.vram_end >> 16));
+ WREG32(R_000134_HDP_FB_LOCATION,
+ S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+ if (rdev->flags & RADEON_IS_AGP) {
+ WREG32_MC(R_000002_MC_AGP_LOCATION,
+ S_000002_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+ S_000002_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+ WREG32_MC(R_000003_MC_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+ WREG32_MC(R_000004_MC_AGP_BASE_2,
+ S_000004_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base)));
+ } else {
+ WREG32_MC(R_000002_MC_AGP_LOCATION, 0xFFFFFFFF);
+ WREG32_MC(R_000003_MC_AGP_BASE, 0);
+ WREG32_MC(R_000004_MC_AGP_BASE_2, 0);
+ }
+
+ rv515_mc_resume(rdev, &save);
+}
+
+void rv515_clock_startup(struct radeon_device *rdev)
+{
+ if (radeon_dynclks != -1 && radeon_dynclks)
+ radeon_atom_set_clock_gating(rdev, 1);
+ /* We need to force on some of the block */
+ WREG32_PLL(R_00000F_CP_DYN_CNTL,
+ RREG32_PLL(R_00000F_CP_DYN_CNTL) | S_00000F_CP_FORCEON(1));
+ WREG32_PLL(R_000011_E2_DYN_CNTL,
+ RREG32_PLL(R_000011_E2_DYN_CNTL) | S_000011_E2_FORCEON(1));
+ WREG32_PLL(R_000013_IDCT_DYN_CNTL,
+ RREG32_PLL(R_000013_IDCT_DYN_CNTL) | S_000013_IDCT_FORCEON(1));
+}
+
+static int rv515_startup(struct radeon_device *rdev)
+{
+ int r;
+
+ rv515_mc_program(rdev);
+ /* Resume clock */
+ rv515_clock_startup(rdev);
+ /* Initialize GPU configuration (# pipes, ...) */
+ rv515_gpu_init(rdev);
+ /* Initialize GART (initialize after TTM so we can allocate
+ * memory through TTM but finalize after TTM) */
+ if (rdev->flags & RADEON_IS_PCIE) {
+ r = rv370_pcie_gart_enable(rdev);
+ if (r)
+ return r;
+ }
+ /* Enable IRQ */
+ rdev->irq.sw_int = true;
+ rs600_irq_set(rdev);
+ /* 1M ring buffer */
+ r = r100_cp_init(rdev, 1024 * 1024);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+ return r;
+ }
+ r = r100_wb_init(rdev);
+ if (r)
+ dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+ r = r100_ib_init(rdev);
+ if (r) {
+ dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+ return r;
+ }
+ return 0;
+}
+
+int rv515_resume(struct radeon_device *rdev)
+{
+ /* Make sur GART are not working */
+ if (rdev->flags & RADEON_IS_PCIE)
+ rv370_pcie_gart_disable(rdev);
+ /* Resume clock before doing reset */
+ rv515_clock_startup(rdev);
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* post */
+ atom_asic_init(rdev->mode_info.atom_context);
+ /* Resume clock after posting */
+ rv515_clock_startup(rdev);
+ return rv515_startup(rdev);
+}
+
+int rv515_suspend(struct radeon_device *rdev)
+{
+ r100_cp_disable(rdev);
+ r100_wb_disable(rdev);
+ rs600_irq_disable(rdev);
+ if (rdev->flags & RADEON_IS_PCIE)
+ rv370_pcie_gart_disable(rdev);
+ return 0;
+}
+
+void rv515_set_safe_registers(struct radeon_device *rdev)
{
rdev->config.r300.reg_safe_bm = rv515_reg_safe_bm;
rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rv515_reg_safe_bm);
+}
+
+void rv515_fini(struct radeon_device *rdev)
+{
+ rv515_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ radeon_gem_fini(rdev);
+ rv370_pcie_gart_fini(rdev);
+ radeon_agp_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ radeon_fence_driver_fini(rdev);
+ radeon_object_fini(rdev);
+ radeon_atombios_fini(rdev);
+ kfree(rdev->bios);
+ rdev->bios = NULL;
+}
+
+int rv515_init(struct radeon_device *rdev)
+{
+ int r;
+
+ /* Initialize scratch registers */
+ radeon_scratch_init(rdev);
+ /* Initialize surface registers */
+ radeon_surface_init(rdev);
+ /* TODO: disable VGA need to use VGA request */
+ /* BIOS*/
+ if (!radeon_get_bios(rdev)) {
+ if (ASIC_IS_AVIVO(rdev))
+ return -EINVAL;
+ }
+ if (rdev->is_atom_bios) {
+ r = radeon_atombios_init(rdev);
+ if (r)
+ return r;
+ } else {
+ dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+ return -EINVAL;
+ }
+ /* Reset gpu before posting otherwise ATOM will enter infinite loop */
+ if (radeon_gpu_reset(rdev)) {
+ dev_warn(rdev->dev,
+ "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+ RREG32(R_000E40_RBBM_STATUS),
+ RREG32(R_0007C0_CP_STAT));
+ }
+ /* check if cards are posted or not */
+ if (!radeon_card_posted(rdev) && rdev->bios) {
+ DRM_INFO("GPU not posted. posting now...\n");
+ atom_asic_init(rdev->mode_info.atom_context);
+ }
+ /* Initialize clocks */
+ radeon_get_clock_info(rdev->ddev);
+ /* Get vram informations */
+ rv515_vram_info(rdev);
+ /* Initialize memory controller (also test AGP) */
+ r = r420_mc_init(rdev);
+ if (r)
+ return r;
+ rv515_debugfs(rdev);
+ /* Fence driver */
+ r = radeon_fence_driver_init(rdev);
+ if (r)
+ return r;
+ r = radeon_irq_kms_init(rdev);
+ if (r)
+ return r;
+ /* Memory manager */
+ r = radeon_object_init(rdev);
+ if (r)
+ return r;
+ r = rv370_pcie_gart_init(rdev);
+ if (r)
+ return r;
+ rv515_set_safe_registers(rdev);
+ rdev->accel_working = true;
+ r = rv515_startup(rdev);
+ if (r) {
+ /* Somethings want wront with the accel init stop accel */
+ dev_err(rdev->dev, "Disabling GPU acceleration\n");
+ rv515_suspend(rdev);
+ r100_cp_fini(rdev);
+ r100_wb_fini(rdev);
+ r100_ib_fini(rdev);
+ rv370_pcie_gart_fini(rdev);
+ radeon_agp_fini(rdev);
+ radeon_irq_kms_fini(rdev);
+ rdev->accel_working = false;
+ }
return 0;
}
#define CP_PACKET0_GET_ONE_REG_WR(h) (((h) >> 15) & 1)
#define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
-#endif
+/* Registers */
+#define R_0000F8_CONFIG_MEMSIZE 0x0000F8
+#define S_0000F8_CONFIG_MEMSIZE(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_0000F8_CONFIG_MEMSIZE(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_0000F8_CONFIG_MEMSIZE 0x00000000
+#define R_000134_HDP_FB_LOCATION 0x000134
+#define S_000134_HDP_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000134_HDP_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000134_HDP_FB_START 0xFFFF0000
+#define R_000300_VGA_RENDER_CONTROL 0x000300
+#define S_000300_VGA_BLINK_RATE(x) (((x) & 0x1F) << 0)
+#define G_000300_VGA_BLINK_RATE(x) (((x) >> 0) & 0x1F)
+#define C_000300_VGA_BLINK_RATE 0xFFFFFFE0
+#define S_000300_VGA_BLINK_MODE(x) (((x) & 0x3) << 5)
+#define G_000300_VGA_BLINK_MODE(x) (((x) >> 5) & 0x3)
+#define C_000300_VGA_BLINK_MODE 0xFFFFFF9F
+#define S_000300_VGA_CURSOR_BLINK_INVERT(x) (((x) & 0x1) << 7)
+#define G_000300_VGA_CURSOR_BLINK_INVERT(x) (((x) >> 7) & 0x1)
+#define C_000300_VGA_CURSOR_BLINK_INVERT 0xFFFFFF7F
+#define S_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x) (((x) & 0x1) << 8)
+#define G_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x) (((x) >> 8) & 0x1)
+#define C_000300_VGA_EXTD_ADDR_COUNT_ENABLE 0xFFFFFEFF
+#define S_000300_VGA_VSTATUS_CNTL(x) (((x) & 0x3) << 16)
+#define G_000300_VGA_VSTATUS_CNTL(x) (((x) >> 16) & 0x3)
+#define C_000300_VGA_VSTATUS_CNTL 0xFFFCFFFF
+#define S_000300_VGA_LOCK_8DOT(x) (((x) & 0x1) << 24)
+#define G_000300_VGA_LOCK_8DOT(x) (((x) >> 24) & 0x1)
+#define C_000300_VGA_LOCK_8DOT 0xFEFFFFFF
+#define S_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) & 0x1) << 25)
+#define G_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) >> 25) & 0x1)
+#define C_000300_VGAREG_LINECMP_COMPATIBILITY_SEL 0xFDFFFFFF
+#define R_000310_VGA_MEMORY_BASE_ADDRESS 0x000310
+#define S_000310_VGA_MEMORY_BASE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_000310_VGA_MEMORY_BASE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_000310_VGA_MEMORY_BASE_ADDRESS 0x00000000
+#define R_000328_VGA_HDP_CONTROL 0x000328
+#define S_000328_VGA_MEM_PAGE_SELECT_EN(x) (((x) & 0x1) << 0)
+#define G_000328_VGA_MEM_PAGE_SELECT_EN(x) (((x) >> 0) & 0x1)
+#define C_000328_VGA_MEM_PAGE_SELECT_EN 0xFFFFFFFE
+#define S_000328_VGA_RBBM_LOCK_DISABLE(x) (((x) & 0x1) << 8)
+#define G_000328_VGA_RBBM_LOCK_DISABLE(x) (((x) >> 8) & 0x1)
+#define C_000328_VGA_RBBM_LOCK_DISABLE 0xFFFFFEFF
+#define S_000328_VGA_SOFT_RESET(x) (((x) & 0x1) << 16)
+#define G_000328_VGA_SOFT_RESET(x) (((x) >> 16) & 0x1)
+#define C_000328_VGA_SOFT_RESET 0xFFFEFFFF
+#define S_000328_VGA_TEST_RESET_CONTROL(x) (((x) & 0x1) << 24)
+#define G_000328_VGA_TEST_RESET_CONTROL(x) (((x) >> 24) & 0x1)
+#define C_000328_VGA_TEST_RESET_CONTROL 0xFEFFFFFF
+#define R_000330_D1VGA_CONTROL 0x000330
+#define S_000330_D1VGA_MODE_ENABLE(x) (((x) & 0x1) << 0)
+#define G_000330_D1VGA_MODE_ENABLE(x) (((x) >> 0) & 0x1)
+#define C_000330_D1VGA_MODE_ENABLE 0xFFFFFFFE
+#define S_000330_D1VGA_TIMING_SELECT(x) (((x) & 0x1) << 8)
+#define G_000330_D1VGA_TIMING_SELECT(x) (((x) >> 8) & 0x1)
+#define C_000330_D1VGA_TIMING_SELECT 0xFFFFFEFF
+#define S_000330_D1VGA_SYNC_POLARITY_SELECT(x) (((x) & 0x1) << 9)
+#define G_000330_D1VGA_SYNC_POLARITY_SELECT(x) (((x) >> 9) & 0x1)
+#define C_000330_D1VGA_SYNC_POLARITY_SELECT 0xFFFFFDFF
+#define S_000330_D1VGA_OVERSCAN_TIMING_SELECT(x) (((x) & 0x1) << 10)
+#define G_000330_D1VGA_OVERSCAN_TIMING_SELECT(x) (((x) >> 10) & 0x1)
+#define C_000330_D1VGA_OVERSCAN_TIMING_SELECT 0xFFFFFBFF
+#define S_000330_D1VGA_OVERSCAN_COLOR_EN(x) (((x) & 0x1) << 16)
+#define G_000330_D1VGA_OVERSCAN_COLOR_EN(x) (((x) >> 16) & 0x1)
+#define C_000330_D1VGA_OVERSCAN_COLOR_EN 0xFFFEFFFF
+#define S_000330_D1VGA_ROTATE(x) (((x) & 0x3) << 24)
+#define G_000330_D1VGA_ROTATE(x) (((x) >> 24) & 0x3)
+#define C_000330_D1VGA_ROTATE 0xFCFFFFFF
+#define R_000338_D2VGA_CONTROL 0x000338
+#define S_000338_D2VGA_MODE_ENABLE(x) (((x) & 0x1) << 0)
+#define G_000338_D2VGA_MODE_ENABLE(x) (((x) >> 0) & 0x1)
+#define C_000338_D2VGA_MODE_ENABLE 0xFFFFFFFE
+#define S_000338_D2VGA_TIMING_SELECT(x) (((x) & 0x1) << 8)
+#define G_000338_D2VGA_TIMING_SELECT(x) (((x) >> 8) & 0x1)
+#define C_000338_D2VGA_TIMING_SELECT 0xFFFFFEFF
+#define S_000338_D2VGA_SYNC_POLARITY_SELECT(x) (((x) & 0x1) << 9)
+#define G_000338_D2VGA_SYNC_POLARITY_SELECT(x) (((x) >> 9) & 0x1)
+#define C_000338_D2VGA_SYNC_POLARITY_SELECT 0xFFFFFDFF
+#define S_000338_D2VGA_OVERSCAN_TIMING_SELECT(x) (((x) & 0x1) << 10)
+#define G_000338_D2VGA_OVERSCAN_TIMING_SELECT(x) (((x) >> 10) & 0x1)
+#define C_000338_D2VGA_OVERSCAN_TIMING_SELECT 0xFFFFFBFF
+#define S_000338_D2VGA_OVERSCAN_COLOR_EN(x) (((x) & 0x1) << 16)
+#define G_000338_D2VGA_OVERSCAN_COLOR_EN(x) (((x) >> 16) & 0x1)
+#define C_000338_D2VGA_OVERSCAN_COLOR_EN 0xFFFEFFFF
+#define S_000338_D2VGA_ROTATE(x) (((x) & 0x3) << 24)
+#define G_000338_D2VGA_ROTATE(x) (((x) >> 24) & 0x3)
+#define C_000338_D2VGA_ROTATE 0xFCFFFFFF
+#define R_0007C0_CP_STAT 0x0007C0
+#define S_0007C0_MRU_BUSY(x) (((x) & 0x1) << 0)
+#define G_0007C0_MRU_BUSY(x) (((x) >> 0) & 0x1)
+#define C_0007C0_MRU_BUSY 0xFFFFFFFE
+#define S_0007C0_MWU_BUSY(x) (((x) & 0x1) << 1)
+#define G_0007C0_MWU_BUSY(x) (((x) >> 1) & 0x1)
+#define C_0007C0_MWU_BUSY 0xFFFFFFFD
+#define S_0007C0_RSIU_BUSY(x) (((x) & 0x1) << 2)
+#define G_0007C0_RSIU_BUSY(x) (((x) >> 2) & 0x1)
+#define C_0007C0_RSIU_BUSY 0xFFFFFFFB
+#define S_0007C0_RCIU_BUSY(x) (((x) & 0x1) << 3)
+#define G_0007C0_RCIU_BUSY(x) (((x) >> 3) & 0x1)
+#define C_0007C0_RCIU_BUSY 0xFFFFFFF7
+#define S_0007C0_CSF_PRIMARY_BUSY(x) (((x) & 0x1) << 9)
+#define G_0007C0_CSF_PRIMARY_BUSY(x) (((x) >> 9) & 0x1)
+#define C_0007C0_CSF_PRIMARY_BUSY 0xFFFFFDFF
+#define S_0007C0_CSF_INDIRECT_BUSY(x) (((x) & 0x1) << 10)
+#define G_0007C0_CSF_INDIRECT_BUSY(x) (((x) >> 10) & 0x1)
+#define C_0007C0_CSF_INDIRECT_BUSY 0xFFFFFBFF
+#define S_0007C0_CSQ_PRIMARY_BUSY(x) (((x) & 0x1) << 11)
+#define G_0007C0_CSQ_PRIMARY_BUSY(x) (((x) >> 11) & 0x1)
+#define C_0007C0_CSQ_PRIMARY_BUSY 0xFFFFF7FF
+#define S_0007C0_CSQ_INDIRECT_BUSY(x) (((x) & 0x1) << 12)
+#define G_0007C0_CSQ_INDIRECT_BUSY(x) (((x) >> 12) & 0x1)
+#define C_0007C0_CSQ_INDIRECT_BUSY 0xFFFFEFFF
+#define S_0007C0_CSI_BUSY(x) (((x) & 0x1) << 13)
+#define G_0007C0_CSI_BUSY(x) (((x) >> 13) & 0x1)
+#define C_0007C0_CSI_BUSY 0xFFFFDFFF
+#define S_0007C0_CSF_INDIRECT2_BUSY(x) (((x) & 0x1) << 14)
+#define G_0007C0_CSF_INDIRECT2_BUSY(x) (((x) >> 14) & 0x1)
+#define C_0007C0_CSF_INDIRECT2_BUSY 0xFFFFBFFF
+#define S_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) & 0x1) << 15)
+#define G_0007C0_CSQ_INDIRECT2_BUSY(x) (((x) >> 15) & 0x1)
+#define C_0007C0_CSQ_INDIRECT2_BUSY 0xFFFF7FFF
+#define S_0007C0_GUIDMA_BUSY(x) (((x) & 0x1) << 28)
+#define G_0007C0_GUIDMA_BUSY(x) (((x) >> 28) & 0x1)
+#define C_0007C0_GUIDMA_BUSY 0xEFFFFFFF
+#define S_0007C0_VIDDMA_BUSY(x) (((x) & 0x1) << 29)
+#define G_0007C0_VIDDMA_BUSY(x) (((x) >> 29) & 0x1)
+#define C_0007C0_VIDDMA_BUSY 0xDFFFFFFF
+#define S_0007C0_CMDSTRM_BUSY(x) (((x) & 0x1) << 30)
+#define G_0007C0_CMDSTRM_BUSY(x) (((x) >> 30) & 0x1)
+#define C_0007C0_CMDSTRM_BUSY 0xBFFFFFFF
+#define S_0007C0_CP_BUSY(x) (((x) & 0x1) << 31)
+#define G_0007C0_CP_BUSY(x) (((x) >> 31) & 0x1)
+#define C_0007C0_CP_BUSY 0x7FFFFFFF
+#define R_000E40_RBBM_STATUS 0x000E40
+#define S_000E40_CMDFIFO_AVAIL(x) (((x) & 0x7F) << 0)
+#define G_000E40_CMDFIFO_AVAIL(x) (((x) >> 0) & 0x7F)
+#define C_000E40_CMDFIFO_AVAIL 0xFFFFFF80
+#define S_000E40_HIRQ_ON_RBB(x) (((x) & 0x1) << 8)
+#define G_000E40_HIRQ_ON_RBB(x) (((x) >> 8) & 0x1)
+#define C_000E40_HIRQ_ON_RBB 0xFFFFFEFF
+#define S_000E40_CPRQ_ON_RBB(x) (((x) & 0x1) << 9)
+#define G_000E40_CPRQ_ON_RBB(x) (((x) >> 9) & 0x1)
+#define C_000E40_CPRQ_ON_RBB 0xFFFFFDFF
+#define S_000E40_CFRQ_ON_RBB(x) (((x) & 0x1) << 10)
+#define G_000E40_CFRQ_ON_RBB(x) (((x) >> 10) & 0x1)
+#define C_000E40_CFRQ_ON_RBB 0xFFFFFBFF
+#define S_000E40_HIRQ_IN_RTBUF(x) (((x) & 0x1) << 11)
+#define G_000E40_HIRQ_IN_RTBUF(x) (((x) >> 11) & 0x1)
+#define C_000E40_HIRQ_IN_RTBUF 0xFFFFF7FF
+#define S_000E40_CPRQ_IN_RTBUF(x) (((x) & 0x1) << 12)
+#define G_000E40_CPRQ_IN_RTBUF(x) (((x) >> 12) & 0x1)
+#define C_000E40_CPRQ_IN_RTBUF 0xFFFFEFFF
+#define S_000E40_CFRQ_IN_RTBUF(x) (((x) & 0x1) << 13)
+#define G_000E40_CFRQ_IN_RTBUF(x) (((x) >> 13) & 0x1)
+#define C_000E40_CFRQ_IN_RTBUF 0xFFFFDFFF
+#define S_000E40_CF_PIPE_BUSY(x) (((x) & 0x1) << 14)
+#define G_000E40_CF_PIPE_BUSY(x) (((x) >> 14) & 0x1)
+#define C_000E40_CF_PIPE_BUSY 0xFFFFBFFF
+#define S_000E40_ENG_EV_BUSY(x) (((x) & 0x1) << 15)
+#define G_000E40_ENG_EV_BUSY(x) (((x) >> 15) & 0x1)
+#define C_000E40_ENG_EV_BUSY 0xFFFF7FFF
+#define S_000E40_CP_CMDSTRM_BUSY(x) (((x) & 0x1) << 16)
+#define G_000E40_CP_CMDSTRM_BUSY(x) (((x) >> 16) & 0x1)
+#define C_000E40_CP_CMDSTRM_BUSY 0xFFFEFFFF
+#define S_000E40_E2_BUSY(x) (((x) & 0x1) << 17)
+#define G_000E40_E2_BUSY(x) (((x) >> 17) & 0x1)
+#define C_000E40_E2_BUSY 0xFFFDFFFF
+#define S_000E40_RB2D_BUSY(x) (((x) & 0x1) << 18)
+#define G_000E40_RB2D_BUSY(x) (((x) >> 18) & 0x1)
+#define C_000E40_RB2D_BUSY 0xFFFBFFFF
+#define S_000E40_RB3D_BUSY(x) (((x) & 0x1) << 19)
+#define G_000E40_RB3D_BUSY(x) (((x) >> 19) & 0x1)
+#define C_000E40_RB3D_BUSY 0xFFF7FFFF
+#define S_000E40_VAP_BUSY(x) (((x) & 0x1) << 20)
+#define G_000E40_VAP_BUSY(x) (((x) >> 20) & 0x1)
+#define C_000E40_VAP_BUSY 0xFFEFFFFF
+#define S_000E40_RE_BUSY(x) (((x) & 0x1) << 21)
+#define G_000E40_RE_BUSY(x) (((x) >> 21) & 0x1)
+#define C_000E40_RE_BUSY 0xFFDFFFFF
+#define S_000E40_TAM_BUSY(x) (((x) & 0x1) << 22)
+#define G_000E40_TAM_BUSY(x) (((x) >> 22) & 0x1)
+#define C_000E40_TAM_BUSY 0xFFBFFFFF
+#define S_000E40_TDM_BUSY(x) (((x) & 0x1) << 23)
+#define G_000E40_TDM_BUSY(x) (((x) >> 23) & 0x1)
+#define C_000E40_TDM_BUSY 0xFF7FFFFF
+#define S_000E40_PB_BUSY(x) (((x) & 0x1) << 24)
+#define G_000E40_PB_BUSY(x) (((x) >> 24) & 0x1)
+#define C_000E40_PB_BUSY 0xFEFFFFFF
+#define S_000E40_TIM_BUSY(x) (((x) & 0x1) << 25)
+#define G_000E40_TIM_BUSY(x) (((x) >> 25) & 0x1)
+#define C_000E40_TIM_BUSY 0xFDFFFFFF
+#define S_000E40_GA_BUSY(x) (((x) & 0x1) << 26)
+#define G_000E40_GA_BUSY(x) (((x) >> 26) & 0x1)
+#define C_000E40_GA_BUSY 0xFBFFFFFF
+#define S_000E40_CBA2D_BUSY(x) (((x) & 0x1) << 27)
+#define G_000E40_CBA2D_BUSY(x) (((x) >> 27) & 0x1)
+#define C_000E40_CBA2D_BUSY 0xF7FFFFFF
+#define S_000E40_RBBM_HIBUSY(x) (((x) & 0x1) << 28)
+#define G_000E40_RBBM_HIBUSY(x) (((x) >> 28) & 0x1)
+#define C_000E40_RBBM_HIBUSY 0xEFFFFFFF
+#define S_000E40_SKID_CFBUSY(x) (((x) & 0x1) << 29)
+#define G_000E40_SKID_CFBUSY(x) (((x) >> 29) & 0x1)
+#define C_000E40_SKID_CFBUSY 0xDFFFFFFF
+#define S_000E40_VAP_VF_BUSY(x) (((x) & 0x1) << 30)
+#define G_000E40_VAP_VF_BUSY(x) (((x) >> 30) & 0x1)
+#define C_000E40_VAP_VF_BUSY 0xBFFFFFFF
+#define S_000E40_GUI_ACTIVE(x) (((x) & 0x1) << 31)
+#define G_000E40_GUI_ACTIVE(x) (((x) >> 31) & 0x1)
+#define C_000E40_GUI_ACTIVE 0x7FFFFFFF
+#define R_006080_D1CRTC_CONTROL 0x006080
+#define S_006080_D1CRTC_MASTER_EN(x) (((x) & 0x1) << 0)
+#define G_006080_D1CRTC_MASTER_EN(x) (((x) >> 0) & 0x1)
+#define C_006080_D1CRTC_MASTER_EN 0xFFFFFFFE
+#define S_006080_D1CRTC_SYNC_RESET_SEL(x) (((x) & 0x1) << 4)
+#define G_006080_D1CRTC_SYNC_RESET_SEL(x) (((x) >> 4) & 0x1)
+#define C_006080_D1CRTC_SYNC_RESET_SEL 0xFFFFFFEF
+#define S_006080_D1CRTC_DISABLE_POINT_CNTL(x) (((x) & 0x3) << 8)
+#define G_006080_D1CRTC_DISABLE_POINT_CNTL(x) (((x) >> 8) & 0x3)
+#define C_006080_D1CRTC_DISABLE_POINT_CNTL 0xFFFFFCFF
+#define S_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x) (((x) & 0x1) << 16)
+#define G_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x) (((x) >> 16) & 0x1)
+#define C_006080_D1CRTC_CURRENT_MASTER_EN_STATE 0xFFFEFFFF
+#define S_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24)
+#define G_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1)
+#define C_006080_D1CRTC_DISP_READ_REQUEST_DISABLE 0xFEFFFFFF
+#define R_0060E8_D1CRTC_UPDATE_LOCK 0x0060E8
+#define S_0060E8_D1CRTC_UPDATE_LOCK(x) (((x) & 0x1) << 0)
+#define G_0060E8_D1CRTC_UPDATE_LOCK(x) (((x) >> 0) & 0x1)
+#define C_0060E8_D1CRTC_UPDATE_LOCK 0xFFFFFFFE
+#define R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x006110
+#define S_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS 0x00000000
+#define R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x006118
+#define S_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS 0x00000000
+#define R_006880_D2CRTC_CONTROL 0x006880
+#define S_006880_D2CRTC_MASTER_EN(x) (((x) & 0x1) << 0)
+#define G_006880_D2CRTC_MASTER_EN(x) (((x) >> 0) & 0x1)
+#define C_006880_D2CRTC_MASTER_EN 0xFFFFFFFE
+#define S_006880_D2CRTC_SYNC_RESET_SEL(x) (((x) & 0x1) << 4)
+#define G_006880_D2CRTC_SYNC_RESET_SEL(x) (((x) >> 4) & 0x1)
+#define C_006880_D2CRTC_SYNC_RESET_SEL 0xFFFFFFEF
+#define S_006880_D2CRTC_DISABLE_POINT_CNTL(x) (((x) & 0x3) << 8)
+#define G_006880_D2CRTC_DISABLE_POINT_CNTL(x) (((x) >> 8) & 0x3)
+#define C_006880_D2CRTC_DISABLE_POINT_CNTL 0xFFFFFCFF
+#define S_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x) (((x) & 0x1) << 16)
+#define G_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x) (((x) >> 16) & 0x1)
+#define C_006880_D2CRTC_CURRENT_MASTER_EN_STATE 0xFFFEFFFF
+#define S_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24)
+#define G_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1)
+#define C_006880_D2CRTC_DISP_READ_REQUEST_DISABLE 0xFEFFFFFF
+#define R_0068E8_D2CRTC_UPDATE_LOCK 0x0068E8
+#define S_0068E8_D2CRTC_UPDATE_LOCK(x) (((x) & 0x1) << 0)
+#define G_0068E8_D2CRTC_UPDATE_LOCK(x) (((x) >> 0) & 0x1)
+#define C_0068E8_D2CRTC_UPDATE_LOCK 0xFFFFFFFE
+#define R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS 0x006910
+#define S_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS 0x00000000
+#define R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS 0x006918
+#define S_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS 0x00000000
+
+
+#define R_000001_MC_FB_LOCATION 0x000001
+#define S_000001_MC_FB_START(x) (((x) & 0xFFFF) << 0)
+#define G_000001_MC_FB_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000001_MC_FB_START 0xFFFF0000
+#define S_000001_MC_FB_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000001_MC_FB_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000001_MC_FB_TOP 0x0000FFFF
+#define R_000002_MC_AGP_LOCATION 0x000002
+#define S_000002_MC_AGP_START(x) (((x) & 0xFFFF) << 0)
+#define G_000002_MC_AGP_START(x) (((x) >> 0) & 0xFFFF)
+#define C_000002_MC_AGP_START 0xFFFF0000
+#define S_000002_MC_AGP_TOP(x) (((x) & 0xFFFF) << 16)
+#define G_000002_MC_AGP_TOP(x) (((x) >> 16) & 0xFFFF)
+#define C_000002_MC_AGP_TOP 0x0000FFFF
+#define R_000003_MC_AGP_BASE 0x000003
+#define S_000003_AGP_BASE_ADDR(x) (((x) & 0xFFFFFFFF) << 0)
+#define G_000003_AGP_BASE_ADDR(x) (((x) >> 0) & 0xFFFFFFFF)
+#define C_000003_AGP_BASE_ADDR 0x00000000
+#define R_000004_MC_AGP_BASE_2 0x000004
+#define S_000004_AGP_BASE_ADDR_2(x) (((x) & 0xF) << 0)
+#define G_000004_AGP_BASE_ADDR_2(x) (((x) >> 0) & 0xF)
+#define C_000004_AGP_BASE_ADDR_2 0xFFFFFFF0
+
+#define R_00000F_CP_DYN_CNTL 0x00000F
+#define S_00000F_CP_FORCEON(x) (((x) & 0x1) << 0)
+#define G_00000F_CP_FORCEON(x) (((x) >> 0) & 0x1)
+#define C_00000F_CP_FORCEON 0xFFFFFFFE
+#define S_00000F_CP_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 1)
+#define G_00000F_CP_MAX_DYN_STOP_LAT(x) (((x) >> 1) & 0x1)
+#define C_00000F_CP_MAX_DYN_STOP_LAT 0xFFFFFFFD
+#define S_00000F_CP_CLOCK_STATUS(x) (((x) & 0x1) << 2)
+#define G_00000F_CP_CLOCK_STATUS(x) (((x) >> 2) & 0x1)
+#define C_00000F_CP_CLOCK_STATUS 0xFFFFFFFB
+#define S_00000F_CP_PROG_SHUTOFF(x) (((x) & 0x1) << 3)
+#define G_00000F_CP_PROG_SHUTOFF(x) (((x) >> 3) & 0x1)
+#define C_00000F_CP_PROG_SHUTOFF 0xFFFFFFF7
+#define S_00000F_CP_PROG_DELAY_VALUE(x) (((x) & 0xFF) << 4)
+#define G_00000F_CP_PROG_DELAY_VALUE(x) (((x) >> 4) & 0xFF)
+#define C_00000F_CP_PROG_DELAY_VALUE 0xFFFFF00F
+#define S_00000F_CP_LOWER_POWER_IDLE(x) (((x) & 0xFF) << 12)
+#define G_00000F_CP_LOWER_POWER_IDLE(x) (((x) >> 12) & 0xFF)
+#define C_00000F_CP_LOWER_POWER_IDLE 0xFFF00FFF
+#define S_00000F_CP_LOWER_POWER_IGNORE(x) (((x) & 0x1) << 20)
+#define G_00000F_CP_LOWER_POWER_IGNORE(x) (((x) >> 20) & 0x1)
+#define C_00000F_CP_LOWER_POWER_IGNORE 0xFFEFFFFF
+#define S_00000F_CP_NORMAL_POWER_IGNORE(x) (((x) & 0x1) << 21)
+#define G_00000F_CP_NORMAL_POWER_IGNORE(x) (((x) >> 21) & 0x1)
+#define C_00000F_CP_NORMAL_POWER_IGNORE 0xFFDFFFFF
+#define S_00000F_SPARE(x) (((x) & 0x3) << 22)
+#define G_00000F_SPARE(x) (((x) >> 22) & 0x3)
+#define C_00000F_SPARE 0xFF3FFFFF
+#define S_00000F_CP_NORMAL_POWER_BUSY(x) (((x) & 0xFF) << 24)
+#define G_00000F_CP_NORMAL_POWER_BUSY(x) (((x) >> 24) & 0xFF)
+#define C_00000F_CP_NORMAL_POWER_BUSY 0x00FFFFFF
+#define R_000011_E2_DYN_CNTL 0x000011
+#define S_000011_E2_FORCEON(x) (((x) & 0x1) << 0)
+#define G_000011_E2_FORCEON(x) (((x) >> 0) & 0x1)
+#define C_000011_E2_FORCEON 0xFFFFFFFE
+#define S_000011_E2_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 1)
+#define G_000011_E2_MAX_DYN_STOP_LAT(x) (((x) >> 1) & 0x1)
+#define C_000011_E2_MAX_DYN_STOP_LAT 0xFFFFFFFD
+#define S_000011_E2_CLOCK_STATUS(x) (((x) & 0x1) << 2)
+#define G_000011_E2_CLOCK_STATUS(x) (((x) >> 2) & 0x1)
+#define C_000011_E2_CLOCK_STATUS 0xFFFFFFFB
+#define S_000011_E2_PROG_SHUTOFF(x) (((x) & 0x1) << 3)
+#define G_000011_E2_PROG_SHUTOFF(x) (((x) >> 3) & 0x1)
+#define C_000011_E2_PROG_SHUTOFF 0xFFFFFFF7
+#define S_000011_E2_PROG_DELAY_VALUE(x) (((x) & 0xFF) << 4)
+#define G_000011_E2_PROG_DELAY_VALUE(x) (((x) >> 4) & 0xFF)
+#define C_000011_E2_PROG_DELAY_VALUE 0xFFFFF00F
+#define S_000011_E2_LOWER_POWER_IDLE(x) (((x) & 0xFF) << 12)
+#define G_000011_E2_LOWER_POWER_IDLE(x) (((x) >> 12) & 0xFF)
+#define C_000011_E2_LOWER_POWER_IDLE 0xFFF00FFF
+#define S_000011_E2_LOWER_POWER_IGNORE(x) (((x) & 0x1) << 20)
+#define G_000011_E2_LOWER_POWER_IGNORE(x) (((x) >> 20) & 0x1)
+#define C_000011_E2_LOWER_POWER_IGNORE 0xFFEFFFFF
+#define S_000011_E2_NORMAL_POWER_IGNORE(x) (((x) & 0x1) << 21)
+#define G_000011_E2_NORMAL_POWER_IGNORE(x) (((x) >> 21) & 0x1)
+#define C_000011_E2_NORMAL_POWER_IGNORE 0xFFDFFFFF
+#define S_000011_SPARE(x) (((x) & 0x3) << 22)
+#define G_000011_SPARE(x) (((x) >> 22) & 0x3)
+#define C_000011_SPARE 0xFF3FFFFF
+#define S_000011_E2_NORMAL_POWER_BUSY(x) (((x) & 0xFF) << 24)
+#define G_000011_E2_NORMAL_POWER_BUSY(x) (((x) >> 24) & 0xFF)
+#define C_000011_E2_NORMAL_POWER_BUSY 0x00FFFFFF
+#define R_000013_IDCT_DYN_CNTL 0x000013
+#define S_000013_IDCT_FORCEON(x) (((x) & 0x1) << 0)
+#define G_000013_IDCT_FORCEON(x) (((x) >> 0) & 0x1)
+#define C_000013_IDCT_FORCEON 0xFFFFFFFE
+#define S_000013_IDCT_MAX_DYN_STOP_LAT(x) (((x) & 0x1) << 1)
+#define G_000013_IDCT_MAX_DYN_STOP_LAT(x) (((x) >> 1) & 0x1)
+#define C_000013_IDCT_MAX_DYN_STOP_LAT 0xFFFFFFFD
+#define S_000013_IDCT_CLOCK_STATUS(x) (((x) & 0x1) << 2)
+#define G_000013_IDCT_CLOCK_STATUS(x) (((x) >> 2) & 0x1)
+#define C_000013_IDCT_CLOCK_STATUS 0xFFFFFFFB
+#define S_000013_IDCT_PROG_SHUTOFF(x) (((x) & 0x1) << 3)
+#define G_000013_IDCT_PROG_SHUTOFF(x) (((x) >> 3) & 0x1)
+#define C_000013_IDCT_PROG_SHUTOFF 0xFFFFFFF7
+#define S_000013_IDCT_PROG_DELAY_VALUE(x) (((x) & 0xFF) << 4)
+#define G_000013_IDCT_PROG_DELAY_VALUE(x) (((x) >> 4) & 0xFF)
+#define C_000013_IDCT_PROG_DELAY_VALUE 0xFFFFF00F
+#define S_000013_IDCT_LOWER_POWER_IDLE(x) (((x) & 0xFF) << 12)
+#define G_000013_IDCT_LOWER_POWER_IDLE(x) (((x) >> 12) & 0xFF)
+#define C_000013_IDCT_LOWER_POWER_IDLE 0xFFF00FFF
+#define S_000013_IDCT_LOWER_POWER_IGNORE(x) (((x) & 0x1) << 20)
+#define G_000013_IDCT_LOWER_POWER_IGNORE(x) (((x) >> 20) & 0x1)
+#define C_000013_IDCT_LOWER_POWER_IGNORE 0xFFEFFFFF
+#define S_000013_IDCT_NORMAL_POWER_IGNORE(x) (((x) & 0x1) << 21)
+#define G_000013_IDCT_NORMAL_POWER_IGNORE(x) (((x) >> 21) & 0x1)
+#define C_000013_IDCT_NORMAL_POWER_IGNORE 0xFFDFFFFF
+#define S_000013_SPARE(x) (((x) & 0x3) << 22)
+#define G_000013_SPARE(x) (((x) >> 22) & 0x3)
+#define C_000013_SPARE 0xFF3FFFFF
+#define S_000013_IDCT_NORMAL_POWER_BUSY(x) (((x) & 0xFF) << 24)
+#define G_000013_IDCT_NORMAL_POWER_BUSY(x) (((x) >> 24) & 0xFF)
+#define C_000013_IDCT_NORMAL_POWER_BUSY 0x00FFFFFF
+
+#endif
#include "radeon.h"
#include "radeon_drm.h"
#include "rv770d.h"
-#include "avivod.h"
#include "atom.h"
+#include "avivod.h"
#define R700_PFP_UCODE_SIZE 848
#define R700_PM4_UCODE_SIZE 1360
WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
WREG32(VM_CONTEXT0_PAGE_TABLE_START_ADDR, rdev->mc.gtt_start >> 12);
- WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, (rdev->mc.gtt_end - 1) >> 12);
+ WREG32(VM_CONTEXT0_PAGE_TABLE_END_ADDR, rdev->mc.gtt_end >> 12);
WREG32(VM_CONTEXT0_PAGE_TABLE_BASE_ADDR, rdev->gart.table_addr >> 12);
WREG32(VM_CONTEXT0_CNTL, ENABLE_CONTEXT | PAGE_TABLE_DEPTH(0) |
RANGE_PROTECTION_FAULT_ENABLE_DEFAULT);
}
-/*
- * MC
- */
-static void rv770_mc_resume(struct radeon_device *rdev)
+void rv770_agp_enable(struct radeon_device *rdev)
+{
+ u32 tmp;
+ int i;
+
+ /* Setup L2 cache */
+ WREG32(VM_L2_CNTL, ENABLE_L2_CACHE | ENABLE_L2_FRAGMENT_PROCESSING |
+ ENABLE_L2_PTE_CACHE_LRU_UPDATE_BY_WRITE |
+ EFFECTIVE_L2_QUEUE_SIZE(7));
+ WREG32(VM_L2_CNTL2, 0);
+ WREG32(VM_L2_CNTL3, BANK_SELECT(0) | CACHE_UPDATE_MODE(2));
+ /* Setup TLB control */
+ tmp = ENABLE_L1_TLB | ENABLE_L1_FRAGMENT_PROCESSING |
+ SYSTEM_ACCESS_MODE_NOT_IN_SYS |
+ SYSTEM_APERTURE_UNMAPPED_ACCESS_PASS_THRU |
+ EFFECTIVE_L1_TLB_SIZE(5) | EFFECTIVE_L1_QUEUE_SIZE(5);
+ WREG32(MC_VM_MD_L1_TLB0_CNTL, tmp);
+ WREG32(MC_VM_MD_L1_TLB1_CNTL, tmp);
+ WREG32(MC_VM_MD_L1_TLB2_CNTL, tmp);
+ WREG32(MC_VM_MB_L1_TLB0_CNTL, tmp);
+ WREG32(MC_VM_MB_L1_TLB1_CNTL, tmp);
+ WREG32(MC_VM_MB_L1_TLB2_CNTL, tmp);
+ WREG32(MC_VM_MB_L1_TLB3_CNTL, tmp);
+ for (i = 0; i < 7; i++)
+ WREG32(VM_CONTEXT0_CNTL + (i * 4), 0);
+}
+
+static void rv770_mc_program(struct radeon_device *rdev)
{
- u32 d1vga_control, d2vga_control;
- u32 vga_render_control, vga_hdp_control;
- u32 d1crtc_control, d2crtc_control;
- u32 new_d1grph_primary, new_d1grph_secondary;
- u32 new_d2grph_primary, new_d2grph_secondary;
- u64 old_vram_start;
+ struct rv515_mc_save save;
u32 tmp;
int i, j;
}
WREG32(HDP_REG_COHERENCY_FLUSH_CNTL, 0);
- d1vga_control = RREG32(D1VGA_CONTROL);
- d2vga_control = RREG32(D2VGA_CONTROL);
- vga_render_control = RREG32(VGA_RENDER_CONTROL);
- vga_hdp_control = RREG32(VGA_HDP_CONTROL);
- d1crtc_control = RREG32(D1CRTC_CONTROL);
- d2crtc_control = RREG32(D2CRTC_CONTROL);
- old_vram_start = (u64)(RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
- new_d1grph_primary = RREG32(D1GRPH_PRIMARY_SURFACE_ADDRESS);
- new_d1grph_secondary = RREG32(D1GRPH_SECONDARY_SURFACE_ADDRESS);
- new_d1grph_primary += rdev->mc.vram_start - old_vram_start;
- new_d1grph_secondary += rdev->mc.vram_start - old_vram_start;
- new_d2grph_primary = RREG32(D2GRPH_PRIMARY_SURFACE_ADDRESS);
- new_d2grph_secondary = RREG32(D2GRPH_SECONDARY_SURFACE_ADDRESS);
- new_d2grph_primary += rdev->mc.vram_start - old_vram_start;
- new_d2grph_secondary += rdev->mc.vram_start - old_vram_start;
-
- /* Stop all video */
- WREG32(D1VGA_CONTROL, 0);
- WREG32(D2VGA_CONTROL, 0);
- WREG32(VGA_RENDER_CONTROL, 0);
- WREG32(D1CRTC_UPDATE_LOCK, 1);
- WREG32(D2CRTC_UPDATE_LOCK, 1);
- WREG32(D1CRTC_CONTROL, 0);
- WREG32(D2CRTC_CONTROL, 0);
- WREG32(D1CRTC_UPDATE_LOCK, 0);
- WREG32(D2CRTC_UPDATE_LOCK, 0);
-
- mdelay(1);
+ rv515_mc_stop(rdev, &save);
if (r600_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "[drm] MC not idle !\n");
+ dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
}
-
/* Lockout access through VGA aperture*/
WREG32(VGA_HDP_CONTROL, VGA_MEMORY_DISABLE);
-
/* Update configuration */
- WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR, rdev->mc.vram_start >> 12);
- WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR, (rdev->mc.vram_end - 1) >> 12);
+ if (rdev->flags & RADEON_IS_AGP) {
+ if (rdev->mc.vram_start < rdev->mc.gtt_start) {
+ /* VRAM before AGP */
+ WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+ rdev->mc.vram_start >> 12);
+ WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ rdev->mc.gtt_end >> 12);
+ } else {
+ /* VRAM after AGP */
+ WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+ rdev->mc.gtt_start >> 12);
+ WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ rdev->mc.vram_end >> 12);
+ }
+ } else {
+ WREG32(MC_VM_SYSTEM_APERTURE_LOW_ADDR,
+ rdev->mc.vram_start >> 12);
+ WREG32(MC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ rdev->mc.vram_end >> 12);
+ }
WREG32(MC_VM_SYSTEM_APERTURE_DEFAULT_ADDR, 0);
- tmp = (((rdev->mc.vram_end - 1) >> 24) & 0xFFFF) << 16;
+ tmp = ((rdev->mc.vram_end >> 24) & 0xFFFF) << 16;
tmp |= ((rdev->mc.vram_start >> 24) & 0xFFFF);
WREG32(MC_VM_FB_LOCATION, tmp);
WREG32(HDP_NONSURFACE_BASE, (rdev->mc.vram_start >> 8));
WREG32(HDP_NONSURFACE_INFO, (2 << 7));
WREG32(HDP_NONSURFACE_SIZE, (rdev->mc.mc_vram_size - 1) | 0x3FF);
if (rdev->flags & RADEON_IS_AGP) {
- WREG32(MC_VM_AGP_TOP, (rdev->mc.gtt_end - 1) >> 16);
+ WREG32(MC_VM_AGP_TOP, rdev->mc.gtt_end >> 16);
WREG32(MC_VM_AGP_BOT, rdev->mc.gtt_start >> 16);
WREG32(MC_VM_AGP_BASE, rdev->mc.agp_base >> 22);
} else {
WREG32(MC_VM_AGP_TOP, 0x0FFFFFFF);
WREG32(MC_VM_AGP_BOT, 0x0FFFFFFF);
}
- WREG32(D1GRPH_PRIMARY_SURFACE_ADDRESS, new_d1grph_primary);
- WREG32(D1GRPH_SECONDARY_SURFACE_ADDRESS, new_d1grph_secondary);
- WREG32(D2GRPH_PRIMARY_SURFACE_ADDRESS, new_d2grph_primary);
- WREG32(D2GRPH_SECONDARY_SURFACE_ADDRESS, new_d2grph_secondary);
- WREG32(VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start);
-
- /* Unlock host access */
- WREG32(VGA_HDP_CONTROL, vga_hdp_control);
-
- mdelay(1);
if (r600_mc_wait_for_idle(rdev)) {
- printk(KERN_WARNING "[drm] MC not idle !\n");
+ dev_warn(rdev->dev, "Wait for MC idle timedout !\n");
}
-
- /* Restore video state */
- WREG32(D1CRTC_UPDATE_LOCK, 1);
- WREG32(D2CRTC_UPDATE_LOCK, 1);
- WREG32(D1CRTC_CONTROL, d1crtc_control);
- WREG32(D2CRTC_CONTROL, d2crtc_control);
- WREG32(D1CRTC_UPDATE_LOCK, 0);
- WREG32(D2CRTC_UPDATE_LOCK, 0);
- WREG32(D1VGA_CONTROL, d1vga_control);
- WREG32(D2VGA_CONTROL, d2vga_control);
- WREG32(VGA_RENDER_CONTROL, vga_render_control);
-
+ rv515_mc_resume(rdev, &save);
/* we need to own VRAM, so turn off the VGA renderer here
* to stop it overwriting our objects */
- radeon_avivo_vga_render_disable(rdev);
+ rv515_vga_render_disable(rdev);
}
/* Setup GPU memory space */
rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
+
+ if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+ rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+ if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+ rdev->mc.real_vram_size = rdev->mc.aper_size;
+
if (rdev->flags & RADEON_IS_AGP) {
r = radeon_agp_init(rdev);
if (r)
rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
}
rdev->mc.vram_start = rdev->mc.vram_location;
- rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size;
+ rdev->mc.vram_end = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
rdev->mc.gtt_start = rdev->mc.gtt_location;
- rdev->mc.gtt_end = rdev->mc.gtt_location + rdev->mc.gtt_size;
+ rdev->mc.gtt_end = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
/* FIXME: we should enforce default clock in case GPU is not in
* default setup
*/
{
int r;
- radeon_gpu_reset(rdev);
- rv770_mc_resume(rdev);
- r = rv770_pcie_gart_enable(rdev);
- if (r)
- return r;
+ rv770_mc_program(rdev);
+ if (rdev->flags & RADEON_IS_AGP) {
+ rv770_agp_enable(rdev);
+ } else {
+ r = rv770_pcie_gart_enable(rdev);
+ if (r)
+ return r;
+ }
rv770_gpu_init(rdev);
r = radeon_object_pin(rdev->r600_blit.shader_obj, RADEON_GEM_DOMAIN_VRAM,
r = r600_cp_resume(rdev);
if (r)
return r;
- r = r600_wb_init(rdev);
- if (r)
- return r;
+ /* write back buffer are not vital so don't worry about failure */
+ r600_wb_enable(rdev);
return 0;
}
{
int r;
- if (radeon_gpu_reset(rdev)) {
- /* FIXME: what do we want to do here ? */
- }
+ /* Do not reset GPU before posting, on rv770 hw unlike on r500 hw,
+ * posting will perform necessary task to bring back GPU into good
+ * shape.
+ */
/* post card */
- if (rdev->is_atom_bios) {
- atom_asic_init(rdev->mode_info.atom_context);
- } else {
- radeon_combios_asic_init(rdev->ddev);
- }
+ atom_asic_init(rdev->mode_info.atom_context);
/* Initialize clocks */
r = radeon_clocks_init(rdev);
if (r) {
return r;
}
- r = radeon_ib_test(rdev);
+ r = r600_ib_test(rdev);
if (r) {
DRM_ERROR("radeon: failled testing IB (%d).\n", r);
return r;
/* FIXME: we should wait for ring to be empty */
r700_cp_stop(rdev);
rdev->cp.ready = false;
+ r600_wb_disable(rdev);
rv770_pcie_gart_disable(rdev);
-
/* unpin shaders bo */
radeon_object_unpin(rdev->r600_blit.shader_obj);
return 0;
{
int r;
- rdev->new_init_path = true;
r = radeon_dummy_page_init(rdev);
if (r)
return r;
return -EINVAL;
}
/* Must be an ATOMBIOS */
- if (!rdev->is_atom_bios)
+ if (!rdev->is_atom_bios) {
+ dev_err(rdev->dev, "Expecting atombios for R600 GPU\n");
return -EINVAL;
+ }
r = radeon_atombios_init(rdev);
if (r)
return r;
if (r)
return r;
r = rv770_mc_init(rdev);
- if (r) {
- if (rdev->flags & RADEON_IS_AGP) {
- /* Retry with disabling AGP */
- rv770_fini(rdev);
- rdev->flags &= ~RADEON_IS_AGP;
- return rv770_init(rdev);
- }
+ if (r)
return r;
- }
/* Memory manager */
r = radeon_object_init(rdev);
if (r)
r = rv770_startup(rdev);
if (r) {
- if (rdev->flags & RADEON_IS_AGP) {
- /* Retry with disabling AGP */
- rv770_fini(rdev);
- rdev->flags &= ~RADEON_IS_AGP;
- return rv770_init(rdev);
- }
+ rv770_suspend(rdev);
+ r600_wb_fini(rdev);
+ radeon_ring_fini(rdev);
+ rv770_pcie_gart_fini(rdev);
rdev->accel_working = false;
}
if (rdev->accel_working) {
DRM_ERROR("radeon: failled initializing IB pool (%d).\n", r);
rdev->accel_working = false;
}
- r = radeon_ib_test(rdev);
+ r = r600_ib_test(rdev);
if (r) {
DRM_ERROR("radeon: failled testing IB (%d).\n", r);
rdev->accel_working = false;
r600_blit_fini(rdev);
radeon_ring_fini(rdev);
+ r600_wb_fini(rdev);
rv770_pcie_gart_fini(rdev);
radeon_gem_fini(rdev);
radeon_fence_driver_fini(rdev);
radeon_clocks_fini(rdev);
-#if __OS_HAS_AGP
if (rdev->flags & RADEON_IS_AGP)
radeon_agp_fini(rdev);
-#endif
radeon_object_fini(rdev);
- if (rdev->is_atom_bios) {
- radeon_atombios_fini(rdev);
- } else {
- radeon_combios_fini(rdev);
- }
+ radeon_atombios_fini(rdev);
kfree(rdev->bios);
rdev->bios = NULL;
radeon_dummy_page_fini(rdev);
vma->vm_private_data = NULL;
}
-static struct vm_operations_struct ttm_bo_vm_ops = {
+static const struct vm_operations_struct ttm_bo_vm_ops = {
.fault = ttm_bo_vm_fault,
.open = ttm_bo_vm_open,
.close = ttm_bo_vm_close
if (unlikely(ret != 0))
goto out_err;
- ++item->refcount;
}
+ ++item->refcount;
ref->object = item->object;
object = item->object;
mutex_unlock(&item->mutex);
* @type: HID report type (HID_*_REPORT)
* @data: report contents
* @size: size of data parameter
- * @interrupt: called from atomic?
+ * @interrupt: distinguish between interrupt and control transfers
*
* This is data entry for lower layers.
*/
.input_mapping = twinhan_input_mapping,
};
-static int twinhan_init(void)
+static int __init twinhan_init(void)
{
return hid_register_driver(&twinhan_driver);
}
-static void twinhan_exit(void)
+static void __exit twinhan_exit(void)
{
hid_unregister_driver(&twinhan_driver);
}
#include <linux/major.h>
#include <linux/hid.h>
#include <linux/mutex.h>
+#include <linux/sched.h>
#include <linux/smp_lock.h>
#include <linux/hidraw.h>
char *report;
DECLARE_WAITQUEUE(wait, current);
- while (ret == 0) {
-
- mutex_lock(&list->read_mutex);
+ mutex_lock(&list->read_mutex);
+ while (ret == 0) {
if (list->head == list->tail) {
add_wait_queue(&list->hidraw->wait, &wait);
set_current_state(TASK_INTERRUPTIBLE);
This driver can also be built as a module. If so, the module
will be called f75375s.
-config SENSORS_FSCHER
- tristate "FSC Hermes (DEPRECATED)"
- depends on X86 && I2C
- help
- This driver is DEPRECATED please use the new merged fschmd
- ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
- instead.
-
- If you say yes here you get support for Fujitsu Siemens
- Computers Hermes sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscher.
-
-config SENSORS_FSCPOS
- tristate "FSC Poseidon (DEPRECATED)"
- depends on X86 && I2C
- help
- This driver is DEPRECATED please use the new merged fschmd
- ("FSC Poseidon, Scylla, Hermes, Heimdall and Heracles") driver
- instead.
-
- If you say yes here you get support for Fujitsu Siemens
- Computers Poseidon sensor chips.
-
- This driver can also be built as a module. If so, the module
- will be called fscpos.
-
config SENSORS_FSCHMD
tristate "Fujitsu Siemens Computers sensor chips"
depends on X86 && I2C
will be called gl520sm.
config SENSORS_CORETEMP
- tristate "Intel Core (2) Duo/Solo temperature sensor"
+ tristate "Intel Core/Core2/Atom temperature sensor"
depends on X86 && EXPERIMENTAL
help
If you say yes here you get support for the temperature
- sensor inside your CPU. Supported all are all known variants
- of Intel Core family.
+ sensor inside your CPU. Most of the family 6 CPUs
+ are supported. Check documentation/driver for details.
config SENSORS_IBMAEM
tristate "IBM Active Energy Manager temperature/power sensors and control"
config SENSORS_S3C
tristate "S3C24XX/S3C64XX Inbuilt ADC"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on ARCH_S3C2410
help
If you say yes here you get support for the on-board ADCs of
the Samsung S3C24XX or S3C64XX series of SoC
obj-$(CONFIG_SENSORS_F71805F) += f71805f.o
obj-$(CONFIG_SENSORS_F71882FG) += f71882fg.o
obj-$(CONFIG_SENSORS_F75375S) += f75375s.o
-obj-$(CONFIG_SENSORS_FSCHER) += fscher.o
obj-$(CONFIG_SENSORS_FSCHMD) += fschmd.o
-obj-$(CONFIG_SENSORS_FSCPOS) += fscpos.o
obj-$(CONFIG_SENSORS_G760A) += g760a.o
obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
#define ADM1031_REG_PWM (0x22)
#define ADM1031_REG_FAN_MIN(nr) (0x10 + (nr))
+#define ADM1031_REG_TEMP_OFFSET(nr) (0x0d + (nr))
#define ADM1031_REG_TEMP_MAX(nr) (0x14 + 4 * (nr))
#define ADM1031_REG_TEMP_MIN(nr) (0x15 + 4 * (nr))
#define ADM1031_REG_TEMP_CRIT(nr) (0x16 + 4 * (nr))
u8 auto_temp_min[3];
u8 auto_temp_off[3];
u8 auto_temp_max[3];
+ s8 temp_offset[3];
s8 temp_min[3];
s8 temp_max[3];
s8 temp_crit[3];
#define TEMP_FROM_REG_EXT(val, ext) (TEMP_FROM_REG(val) + (ext) * 125)
+#define TEMP_OFFSET_TO_REG(val) (TEMP_TO_REG(val) & 0x8f)
+#define TEMP_OFFSET_FROM_REG(val) TEMP_FROM_REG((val) < 0 ? \
+ (val) | 0x70 : (val))
+
#define FAN_FROM_REG(reg, div) ((reg) ? (11250 * 60) / ((reg) * (div)) : 0)
static int FAN_TO_REG(int reg, int div)
(((data->ext_temp[nr] >> ((nr - 1) * 3)) & 7));
return sprintf(buf, "%d\n", TEMP_FROM_REG_EXT(data->temp[nr], ext));
}
+static ssize_t show_temp_offset(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int nr = to_sensor_dev_attr(attr)->index;
+ struct adm1031_data *data = adm1031_update_device(dev);
+ return sprintf(buf, "%d\n",
+ TEMP_OFFSET_FROM_REG(data->temp_offset[nr]));
+}
static ssize_t show_temp_min(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct adm1031_data *data = adm1031_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_crit[nr]));
}
+static ssize_t set_temp_offset(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct adm1031_data *data = i2c_get_clientdata(client);
+ int nr = to_sensor_dev_attr(attr)->index;
+ int val;
+
+ val = simple_strtol(buf, NULL, 10);
+ val = SENSORS_LIMIT(val, -15000, 15000);
+ mutex_lock(&data->update_lock);
+ data->temp_offset[nr] = TEMP_OFFSET_TO_REG(val);
+ adm1031_write_value(client, ADM1031_REG_TEMP_OFFSET(nr),
+ data->temp_offset[nr]);
+ mutex_unlock(&data->update_lock);
+ return count;
+}
static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
#define temp_reg(offset) \
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
show_temp, NULL, offset - 1); \
+static SENSOR_DEVICE_ATTR(temp##offset##_offset, S_IRUGO | S_IWUSR, \
+ show_temp_offset, set_temp_offset, offset - 1); \
static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \
show_temp_min, set_temp_min, offset - 1); \
static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_auto_fan1_channel.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_offset.dev_attr.attr,
&sensor_dev_attr_temp1_min.dev_attr.attr,
&sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_crit.dev_attr.attr,
&sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
+ &sensor_dev_attr_temp2_offset.dev_attr.attr,
&sensor_dev_attr_temp2_min.dev_attr.attr,
&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_auto_fan2_channel.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
+ &sensor_dev_attr_temp3_offset.dev_attr.attr,
&sensor_dev_attr_temp3_min.dev_attr.attr,
&sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
}
data->temp[chan] = newh;
+ data->temp_offset[chan] =
+ adm1031_read_value(client,
+ ADM1031_REG_TEMP_OFFSET(chan));
data->temp_min[chan] =
adm1031_read_value(client,
ADM1031_REG_TEMP_MIN(chan));
#define METHOD_OLD_ENUM_FAN "FSIF"
#define ATK_MUX_HWMON 0x00000006ULL
+#define ATK_MUX_MGMT 0x00000011ULL
#define ATK_CLASS_MASK 0xff000000ULL
#define ATK_CLASS_FREQ_CTL 0x03000000ULL
#define ATK_CLASS_FAN_CTL 0x04000000ULL
#define ATK_CLASS_HWMON 0x06000000ULL
+#define ATK_CLASS_MGMT 0x11000000ULL
#define ATK_TYPE_MASK 0x00ff0000ULL
#define HWMON_TYPE_VOLT 0x00020000ULL
#define HWMON_TYPE_TEMP 0x00030000ULL
#define HWMON_TYPE_FAN 0x00040000ULL
-#define HWMON_SENSOR_ID_MASK 0x0000ffffULL
+#define ATK_ELEMENT_ID_MASK 0x0000ffffULL
+
+#define ATK_EC_ID 0x11060004ULL
enum atk_pack_member {
HWMON_PACK_FLAGS,
/* new inteface */
acpi_handle enumerate_handle;
acpi_handle read_handle;
+ acpi_handle write_handle;
+
+ bool disable_ec;
int voltage_count;
int temperature_count;
char const *acpi_name;
};
-struct atk_acpi_buffer_u64 {
- union acpi_object buf;
- u64 value;
+/* Return buffer format:
+ * [0-3] "value" is valid flag
+ * [4-7] value
+ * [8- ] unknown stuff on newer mobos
+ */
+struct atk_acpi_ret_buffer {
+ u32 flags;
+ u32 value;
+ u8 data[];
+};
+
+/* Input buffer used for GITM and SITM methods */
+struct atk_acpi_input_buf {
+ u32 id;
+ u32 param1;
+ u32 param2;
};
static int atk_add(struct acpi_device *device);
return 0;
}
-static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value)
+static union acpi_object *atk_ggrp(struct atk_data *data, u16 mux)
{
- struct atk_data *data = sensor->data;
struct device *dev = &data->acpi_dev->dev;
+ struct acpi_buffer buf;
+ acpi_status ret;
struct acpi_object_list params;
- struct acpi_buffer ret;
union acpi_object id;
- struct atk_acpi_buffer_u64 tmp;
- acpi_status status;
+ union acpi_object *pack;
id.type = ACPI_TYPE_INTEGER;
- id.integer.value = sensor->id;
-
+ id.integer.value = mux;
params.count = 1;
params.pointer = &id;
- tmp.buf.type = ACPI_TYPE_BUFFER;
- tmp.buf.buffer.pointer = (u8 *)&tmp.value;
- tmp.buf.buffer.length = sizeof(u64);
- ret.length = sizeof(tmp);
- ret.pointer = &tmp;
+ buf.length = ACPI_ALLOCATE_BUFFER;
+ ret = acpi_evaluate_object(data->enumerate_handle, NULL, ¶ms, &buf);
+ if (ret != AE_OK) {
+ dev_err(dev, "GGRP[%#x] ACPI exception: %s\n", mux,
+ acpi_format_exception(ret));
+ return ERR_PTR(-EIO);
+ }
+ pack = buf.pointer;
+ if (pack->type != ACPI_TYPE_PACKAGE) {
+ /* Execution was successful, but the id was not found */
+ ACPI_FREE(pack);
+ return ERR_PTR(-ENOENT);
+ }
+
+ if (pack->package.count < 1) {
+ dev_err(dev, "GGRP[%#x] package is too small\n", mux);
+ ACPI_FREE(pack);
+ return ERR_PTR(-EIO);
+ }
+ return pack;
+}
+
+static union acpi_object *atk_gitm(struct atk_data *data, u64 id)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ struct atk_acpi_input_buf buf;
+ union acpi_object tmp;
+ struct acpi_object_list params;
+ struct acpi_buffer ret;
+ union acpi_object *obj;
+ acpi_status status;
+
+ buf.id = id;
+ buf.param1 = 0;
+ buf.param2 = 0;
+ tmp.type = ACPI_TYPE_BUFFER;
+ tmp.buffer.pointer = (u8 *)&buf;
+ tmp.buffer.length = sizeof(buf);
+
+ params.count = 1;
+ params.pointer = (void *)&tmp;
+
+ ret.length = ACPI_ALLOCATE_BUFFER;
status = acpi_evaluate_object_typed(data->read_handle, NULL, ¶ms,
&ret, ACPI_TYPE_BUFFER);
if (status != AE_OK) {
- dev_warn(dev, "%s: ACPI exception: %s\n", __func__,
+ dev_warn(dev, "GITM[%#llx] ACPI exception: %s\n", id,
acpi_format_exception(status));
- return -EIO;
+ return ERR_PTR(-EIO);
+ }
+ obj = ret.pointer;
+
+ /* Sanity check */
+ if (obj->buffer.length < 8) {
+ dev_warn(dev, "Unexpected ASBF length: %u\n",
+ obj->buffer.length);
+ ACPI_FREE(obj);
+ return ERR_PTR(-EIO);
}
+ return obj;
+}
- /* Return buffer format:
- * [0-3] "value" is valid flag
- * [4-7] value
- */
- if (!(tmp.value & 0xffffffff)) {
+static union acpi_object *atk_sitm(struct atk_data *data,
+ struct atk_acpi_input_buf *buf)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ struct acpi_object_list params;
+ union acpi_object tmp;
+ struct acpi_buffer ret;
+ union acpi_object *obj;
+ acpi_status status;
+
+ tmp.type = ACPI_TYPE_BUFFER;
+ tmp.buffer.pointer = (u8 *)buf;
+ tmp.buffer.length = sizeof(*buf);
+
+ params.count = 1;
+ params.pointer = &tmp;
+
+ ret.length = ACPI_ALLOCATE_BUFFER;
+ status = acpi_evaluate_object_typed(data->write_handle, NULL, ¶ms,
+ &ret, ACPI_TYPE_BUFFER);
+ if (status != AE_OK) {
+ dev_warn(dev, "SITM[%#x] ACPI exception: %s\n", buf->id,
+ acpi_format_exception(status));
+ return ERR_PTR(-EIO);
+ }
+ obj = ret.pointer;
+
+ /* Sanity check */
+ if (obj->buffer.length < 8) {
+ dev_warn(dev, "Unexpected ASBF length: %u\n",
+ obj->buffer.length);
+ ACPI_FREE(obj);
+ return ERR_PTR(-EIO);
+ }
+ return obj;
+}
+
+static int atk_read_value_new(struct atk_sensor_data *sensor, u64 *value)
+{
+ struct atk_data *data = sensor->data;
+ struct device *dev = &data->acpi_dev->dev;
+ union acpi_object *obj;
+ struct atk_acpi_ret_buffer *buf;
+ int err = 0;
+
+ obj = atk_gitm(data, sensor->id);
+ if (IS_ERR(obj))
+ return PTR_ERR(obj);
+
+ buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+ if (buf->flags == 0) {
/* The reading is not valid, possible causes:
* - sensor failure
* - enumeration was FUBAR (and we didn't notice)
*/
- dev_info(dev, "Failure: %#llx\n", tmp.value);
- return -EIO;
+ dev_warn(dev, "Read failed, sensor = %#llx\n", sensor->id);
+ err = -EIO;
+ goto out;
}
- *value = (tmp.value & 0xffffffff00000000ULL) >> 32;
-
- return 0;
+ *value = buf->value;
+out:
+ ACPI_FREE(obj);
+ return err;
}
static int atk_read_value(struct atk_sensor_data *sensor, u64 *value)
return ret;
}
-static int atk_enumerate_new_hwmon(struct atk_data *data)
+static int atk_ec_present(struct atk_data *data)
{
struct device *dev = &data->acpi_dev->dev;
- struct acpi_buffer buf;
- acpi_status ret;
- struct acpi_object_list params;
- union acpi_object id;
union acpi_object *pack;
- int err;
+ union acpi_object *ec;
+ int ret;
int i;
- dev_dbg(dev, "Enumerating hwmon sensors\n");
+ pack = atk_ggrp(data, ATK_MUX_MGMT);
+ if (IS_ERR(pack)) {
+ if (PTR_ERR(pack) == -ENOENT) {
+ /* The MGMT class does not exists - that's ok */
+ dev_dbg(dev, "Class %#llx not found\n", ATK_MUX_MGMT);
+ return 0;
+ }
+ return PTR_ERR(pack);
+ }
- id.type = ACPI_TYPE_INTEGER;
- id.integer.value = ATK_MUX_HWMON;
- params.count = 1;
- params.pointer = &id;
+ /* Search the EC */
+ ec = NULL;
+ for (i = 0; i < pack->package.count; i++) {
+ union acpi_object *obj = &pack->package.elements[i];
+ union acpi_object *id;
- buf.length = ACPI_ALLOCATE_BUFFER;
- ret = acpi_evaluate_object_typed(data->enumerate_handle, NULL, ¶ms,
- &buf, ACPI_TYPE_PACKAGE);
- if (ret != AE_OK) {
- dev_warn(dev, METHOD_ENUMERATE ": ACPI exception: %s\n",
- acpi_format_exception(ret));
- return -ENODEV;
+ if (obj->type != ACPI_TYPE_PACKAGE)
+ continue;
+
+ id = &obj->package.elements[0];
+ if (id->type != ACPI_TYPE_INTEGER)
+ continue;
+
+ if (id->integer.value == ATK_EC_ID) {
+ ec = obj;
+ break;
+ }
}
- /* Result must be a package */
- pack = buf.pointer;
+ ret = (ec != NULL);
+ if (!ret)
+ /* The system has no EC */
+ dev_dbg(dev, "EC not found\n");
- if (pack->package.count < 1) {
- dev_dbg(dev, "%s: hwmon package is too small: %d\n", __func__,
- pack->package.count);
- err = -EINVAL;
- goto out;
+ ACPI_FREE(pack);
+ return ret;
+}
+
+static int atk_ec_enabled(struct atk_data *data)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ union acpi_object *obj;
+ struct atk_acpi_ret_buffer *buf;
+ int err;
+
+ obj = atk_gitm(data, ATK_EC_ID);
+ if (IS_ERR(obj)) {
+ dev_err(dev, "Unable to query EC status\n");
+ return PTR_ERR(obj);
+ }
+ buf = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+
+ if (buf->flags == 0) {
+ dev_err(dev, "Unable to query EC status\n");
+ err = -EIO;
+ } else {
+ err = (buf->value != 0);
+ dev_dbg(dev, "EC is %sabled\n",
+ err ? "en" : "dis");
+ }
+
+ ACPI_FREE(obj);
+ return err;
+}
+
+static int atk_ec_ctl(struct atk_data *data, int enable)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ union acpi_object *obj;
+ struct atk_acpi_input_buf sitm;
+ struct atk_acpi_ret_buffer *ec_ret;
+ int err = 0;
+
+ sitm.id = ATK_EC_ID;
+ sitm.param1 = enable;
+ sitm.param2 = 0;
+
+ obj = atk_sitm(data, &sitm);
+ if (IS_ERR(obj)) {
+ dev_err(dev, "Failed to %sable the EC\n",
+ enable ? "en" : "dis");
+ return PTR_ERR(obj);
+ }
+ ec_ret = (struct atk_acpi_ret_buffer *)obj->buffer.pointer;
+ if (ec_ret->flags == 0) {
+ dev_err(dev, "Failed to %sable the EC\n",
+ enable ? "en" : "dis");
+ err = -EIO;
+ } else {
+ dev_info(dev, "EC %sabled\n",
+ enable ? "en" : "dis");
+ }
+
+ ACPI_FREE(obj);
+ return err;
+}
+
+static int atk_enumerate_new_hwmon(struct atk_data *data)
+{
+ struct device *dev = &data->acpi_dev->dev;
+ union acpi_object *pack;
+ int err;
+ int i;
+
+ err = atk_ec_present(data);
+ if (err < 0)
+ return err;
+ if (err) {
+ err = atk_ec_enabled(data);
+ if (err < 0)
+ return err;
+ /* If the EC was disabled we will disable it again on unload */
+ data->disable_ec = err;
+
+ err = atk_ec_ctl(data, 1);
+ if (err) {
+ data->disable_ec = false;
+ return err;
+ }
}
+ dev_dbg(dev, "Enumerating hwmon sensors\n");
+
+ pack = atk_ggrp(data, ATK_MUX_HWMON);
+ if (IS_ERR(pack))
+ return PTR_ERR(pack);
+
for (i = 0; i < pack->package.count; i++) {
union acpi_object *obj = &pack->package.elements[i];
err = data->voltage_count + data->temperature_count + data->fan_count;
-out:
- ACPI_FREE(buf.pointer);
+ ACPI_FREE(pack);
return err;
}
}
data->read_handle = ret;
+ /* De-multiplexer (write) */
+ status = acpi_get_handle(data->atk_handle, METHOD_WRITE, &ret);
+ if (status != AE_OK) {
+ dev_dbg(dev, "method " METHOD_READ " not found: %s\n",
+ acpi_format_exception(status));
+ return -ENODEV;
+ }
+ data->write_handle = ret;
+
return 0;
}
data->acpi_dev = device;
data->atk_handle = device->handle;
INIT_LIST_HEAD(&data->sensor_list);
+ data->disable_ec = false;
buf.length = ACPI_ALLOCATE_BUFFER;
ret = acpi_evaluate_object_typed(data->atk_handle, BOARD_ID, NULL,
cleanup:
atk_free_sensors(data);
out:
+ if (data->disable_ec)
+ atk_ec_ctl(data, 0);
kfree(data);
return err;
}
atk_free_sensors(data);
hwmon_device_unregister(data->hwmon_dev);
+ if (data->disable_ec) {
+ if (atk_ec_ctl(data, 0))
+ dev_err(&device->dev, "Failed to disable EC\n");
+ }
+
kfree(data);
return 0;
/* The 100C is default for both mobile and non mobile CPUs */
int tjmax = 100000;
- int ismobile = 1;
+ int tjmax_ee = 85000;
+ int usemsr_ee = 1;
int err;
u32 eax, edx;
/* Early chips have no MSR for TjMax */
if ((c->x86_model == 0xf) && (c->x86_mask < 4)) {
- ismobile = 0;
+ usemsr_ee = 0;
}
- if ((c->x86_model > 0xe) && (ismobile)) {
+ /* Atoms seems to have TjMax at 90C */
+
+ if (c->x86_model == 0x1c) {
+ usemsr_ee = 0;
+ tjmax = 90000;
+ }
+
+ if ((c->x86_model > 0xe) && (usemsr_ee)) {
+ u8 platform_id;
/* Now we can detect the mobile CPU using Intel provided table
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
dev_warn(dev,
"Unable to access MSR 0x17, assuming desktop"
" CPU\n");
- ismobile = 0;
- } else if (!(eax & 0x10000000)) {
- ismobile = 0;
+ usemsr_ee = 0;
+ } else if (c->x86_model < 0x17 && !(eax & 0x10000000)) {
+ /* Trust bit 28 up to Penryn, I could not find any
+ documentation on that; if you happen to know
+ someone at Intel please ask */
+ usemsr_ee = 0;
+ } else {
+ /* Platform ID bits 52:50 (EDX starts at bit 32) */
+ platform_id = (edx >> 18) & 0x7;
+
+ /* Mobile Penryn CPU seems to be platform ID 7 or 5
+ (guesswork) */
+ if ((c->x86_model == 0x17) &&
+ ((platform_id == 5) || (platform_id == 7))) {
+ /* If MSR EE bit is set, set it to 90 degrees C,
+ otherwise 105 degrees C */
+ tjmax_ee = 90000;
+ tjmax = 105000;
+ }
}
}
- if (ismobile || c->x86_model == 0x1c) {
+ if (usemsr_ee) {
err = rdmsr_safe_on_cpu(id, 0xee, &eax, &edx);
if (err) {
"Unable to access MSR 0xEE, for Tjmax, left"
" at default");
} else if (eax & 0x40000000) {
- tjmax = 85000;
+ tjmax = tjmax_ee;
}
- } else {
+ /* if we dont use msr EE it means we are desktop CPU (with exeception
+ of Atom) */
+ } else if (tjmax == 100000) {
dev_warn(dev, "Using relative temperature scale!\n");
}
platform_set_drvdata(pdev, data);
/* read the still undocumented IA32_TEMPERATURE_TARGET it exists
- on older CPUs but not in this register */
+ on older CPUs but not in this register, Atoms don't have it either */
- if (c->x86_model > 0xe) {
+ if ((c->x86_model > 0xe) && (c->x86_model != 0x1c)) {
err = rdmsr_safe_on_cpu(data->id, 0x1a2, &eax, &edx);
if (err) {
dev_warn(&pdev->dev, "Unable to read"
for_each_online_cpu(i) {
struct cpuinfo_x86 *c = &cpu_data(i);
- /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */
+ /* check if family 6, models 0xe (Pentium M DC),
+ 0xf (Core 2 DC 65nm), 0x16 (Core 2 SC 65nm),
+ 0x17 (Penryn 45nm), 0x1a (Nehalem), 0x1c (Atom),
+ 0x1e (Lynnfield) */
if ((c->cpuid_level < 0) || (c->x86 != 0x6) ||
!((c->x86_model == 0xe) || (c->x86_model == 0xf) ||
(c->x86_model == 0x16) || (c->x86_model == 0x17) ||
- (c->x86_model == 0x1A) || (c->x86_model == 0x1c))) {
+ (c->x86_model == 0x1a) || (c->x86_model == 0x1c) ||
+ (c->x86_model == 0x1e))) {
/* supported CPU not found, but report the unknown
family 6 CPU */
/* Sample register contents every 1 sec */
if (time_after(jiffies, data->last_update + HZ) || !data->valid) {
- if (data->type != sch5027) {
+ if (data->type == dme1737) {
data->vid = dme1737_read(data, DME1737_REG_VID) &
0x3f;
}
&sensor_dev_attr_zone1_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_zone2_auto_point1_temp_hyst.dev_attr.attr,
&sensor_dev_attr_zone3_auto_point1_temp_hyst.dev_attr.attr,
- /* Misc */
- &dev_attr_vrm.attr,
- &dev_attr_cpu0_vid.attr,
NULL
};
.attrs = dme1737_misc_attr,
};
+/* The following struct holds VID-related attributes. Their creation
+ depends on the chip type which is determined during module load. */
+static struct attribute *dme1737_vid_attr[] = {
+ &dev_attr_vrm.attr,
+ &dev_attr_cpu0_vid.attr,
+ NULL
+};
+
+static const struct attribute_group dme1737_vid_group = {
+ .attrs = dme1737_vid_attr,
+};
+
/* The following structs hold the PWM attributes, some of which are optional.
* Their creation depends on the chip configuration which is determined during
* module load. */
if (data->type != sch5027) {
sysfs_remove_group(&dev->kobj, &dme1737_misc_group);
}
+ if (data->type == dme1737) {
+ sysfs_remove_group(&dev->kobj, &dme1737_vid_group);
+ }
sysfs_remove_group(&dev->kobj, &dme1737_group);
goto exit_remove;
}
+ /* Create VID-related sysfs attributes */
+ if ((data->type == dme1737) &&
+ (err = sysfs_create_group(&dev->kobj,
+ &dme1737_vid_group))) {
+ goto exit_remove;
+ }
+
/* Create fan sysfs attributes */
for (ix = 0; ix < ARRAY_SIZE(dme1737_fan_group); ix++) {
if (data->has_fan & (1 << ix)) {
data->pwm_acz[2] = 4; /* pwm3 -> zone3 */
/* Set VRM */
- if (data->type != sch5027) {
+ if (data->type == dme1737) {
data->vrm = vid_which_vrm();
}
+++ /dev/null
-/*
- * fscher.c - Part of lm_sensors, Linux kernel modules for hardware
- * monitoring
- * Copyright (C) 2003, 2004 Reinhard Nissl <rnissl@gmx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/*
- * fujitsu siemens hermes chip,
- * module based on fscpos.c
- * Copyright (C) 2000 Hermann Jung <hej@odn.de>
- * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- * and Philip Edelbrock <phil@netroedge.com>
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/hwmon.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-
-/*
- * Addresses to scan
- */
-
-static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-
-/*
- * Insmod parameters
- */
-
-I2C_CLIENT_INSMOD_1(fscher);
-
-/*
- * The FSCHER registers
- */
-
-/* chip identification */
-#define FSCHER_REG_IDENT_0 0x00
-#define FSCHER_REG_IDENT_1 0x01
-#define FSCHER_REG_IDENT_2 0x02
-#define FSCHER_REG_REVISION 0x03
-
-/* global control and status */
-#define FSCHER_REG_EVENT_STATE 0x04
-#define FSCHER_REG_CONTROL 0x05
-
-/* watchdog */
-#define FSCHER_REG_WDOG_PRESET 0x28
-#define FSCHER_REG_WDOG_STATE 0x23
-#define FSCHER_REG_WDOG_CONTROL 0x21
-
-/* fan 0 */
-#define FSCHER_REG_FAN0_MIN 0x55
-#define FSCHER_REG_FAN0_ACT 0x0e
-#define FSCHER_REG_FAN0_STATE 0x0d
-#define FSCHER_REG_FAN0_RIPPLE 0x0f
-
-/* fan 1 */
-#define FSCHER_REG_FAN1_MIN 0x65
-#define FSCHER_REG_FAN1_ACT 0x6b
-#define FSCHER_REG_FAN1_STATE 0x62
-#define FSCHER_REG_FAN1_RIPPLE 0x6f
-
-/* fan 2 */
-#define FSCHER_REG_FAN2_MIN 0xb5
-#define FSCHER_REG_FAN2_ACT 0xbb
-#define FSCHER_REG_FAN2_STATE 0xb2
-#define FSCHER_REG_FAN2_RIPPLE 0xbf
-
-/* voltage supervision */
-#define FSCHER_REG_VOLT_12 0x45
-#define FSCHER_REG_VOLT_5 0x42
-#define FSCHER_REG_VOLT_BATT 0x48
-
-/* temperature 0 */
-#define FSCHER_REG_TEMP0_ACT 0x64
-#define FSCHER_REG_TEMP0_STATE 0x71
-
-/* temperature 1 */
-#define FSCHER_REG_TEMP1_ACT 0x32
-#define FSCHER_REG_TEMP1_STATE 0x81
-
-/* temperature 2 */
-#define FSCHER_REG_TEMP2_ACT 0x35
-#define FSCHER_REG_TEMP2_STATE 0x91
-
-/*
- * Functions declaration
- */
-
-static int fscher_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int fscher_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info);
-static int fscher_remove(struct i2c_client *client);
-static struct fscher_data *fscher_update_device(struct device *dev);
-static void fscher_init_client(struct i2c_client *client);
-
-static int fscher_read_value(struct i2c_client *client, u8 reg);
-static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value);
-
-/*
- * Driver data (common to all clients)
- */
-
-static const struct i2c_device_id fscher_id[] = {
- { "fscher", fscher },
- { }
-};
-
-static struct i2c_driver fscher_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "fscher",
- },
- .probe = fscher_probe,
- .remove = fscher_remove,
- .id_table = fscher_id,
- .detect = fscher_detect,
- .address_data = &addr_data,
-};
-
-/*
- * Client data (each client gets its own)
- */
-
-struct fscher_data {
- struct device *hwmon_dev;
- struct mutex update_lock;
- char valid; /* zero until following fields are valid */
- unsigned long last_updated; /* in jiffies */
-
- /* register values */
- u8 revision; /* revision of chip */
- u8 global_event; /* global event status */
- u8 global_control; /* global control register */
- u8 watchdog[3]; /* watchdog */
- u8 volt[3]; /* 12, 5, battery voltage */
- u8 temp_act[3]; /* temperature */
- u8 temp_status[3]; /* status of sensor */
- u8 fan_act[3]; /* fans revolutions per second */
- u8 fan_status[3]; /* fan status */
- u8 fan_min[3]; /* fan min value for rps */
- u8 fan_ripple[3]; /* divider for rps */
-};
-
-/*
- * Sysfs stuff
- */
-
-#define sysfs_r(kind, sub, offset, reg) \
-static ssize_t show_##kind##sub (struct fscher_data *, char *, int); \
-static ssize_t show_##kind##offset##sub (struct device *, struct device_attribute *attr, char *); \
-static ssize_t show_##kind##offset##sub (struct device *dev, struct device_attribute *attr, char *buf) \
-{ \
- struct fscher_data *data = fscher_update_device(dev); \
- return show_##kind##sub(data, buf, (offset)); \
-}
-
-#define sysfs_w(kind, sub, offset, reg) \
-static ssize_t set_##kind##sub (struct i2c_client *, struct fscher_data *, const char *, size_t, int, int); \
-static ssize_t set_##kind##offset##sub (struct device *, struct device_attribute *attr, const char *, size_t); \
-static ssize_t set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \
-{ \
- struct i2c_client *client = to_i2c_client(dev); \
- struct fscher_data *data = i2c_get_clientdata(client); \
- return set_##kind##sub(client, data, buf, count, (offset), reg); \
-}
-
-#define sysfs_rw_n(kind, sub, offset, reg) \
-sysfs_r(kind, sub, offset, reg) \
-sysfs_w(kind, sub, offset, reg) \
-static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, show_##kind##offset##sub, set_##kind##offset##sub);
-
-#define sysfs_rw(kind, sub, reg) \
-sysfs_r(kind, sub, 0, reg) \
-sysfs_w(kind, sub, 0, reg) \
-static DEVICE_ATTR(kind##sub, S_IRUGO | S_IWUSR, show_##kind##0##sub, set_##kind##0##sub);
-
-#define sysfs_ro_n(kind, sub, offset, reg) \
-sysfs_r(kind, sub, offset, reg) \
-static DEVICE_ATTR(kind##offset##sub, S_IRUGO, show_##kind##offset##sub, NULL);
-
-#define sysfs_ro(kind, sub, reg) \
-sysfs_r(kind, sub, 0, reg) \
-static DEVICE_ATTR(kind, S_IRUGO, show_##kind##0##sub, NULL);
-
-#define sysfs_fan(offset, reg_status, reg_min, reg_ripple, reg_act) \
-sysfs_rw_n(pwm, , offset, reg_min) \
-sysfs_rw_n(fan, _status, offset, reg_status) \
-sysfs_rw_n(fan, _div , offset, reg_ripple) \
-sysfs_ro_n(fan, _input , offset, reg_act)
-
-#define sysfs_temp(offset, reg_status, reg_act) \
-sysfs_rw_n(temp, _status, offset, reg_status) \
-sysfs_ro_n(temp, _input , offset, reg_act)
-
-#define sysfs_in(offset, reg_act) \
-sysfs_ro_n(in, _input, offset, reg_act)
-
-#define sysfs_revision(reg_revision) \
-sysfs_ro(revision, , reg_revision)
-
-#define sysfs_alarms(reg_events) \
-sysfs_ro(alarms, , reg_events)
-
-#define sysfs_control(reg_control) \
-sysfs_rw(control, , reg_control)
-
-#define sysfs_watchdog(reg_control, reg_status, reg_preset) \
-sysfs_rw(watchdog, _control, reg_control) \
-sysfs_rw(watchdog, _status , reg_status) \
-sysfs_rw(watchdog, _preset , reg_preset)
-
-sysfs_fan(1, FSCHER_REG_FAN0_STATE, FSCHER_REG_FAN0_MIN,
- FSCHER_REG_FAN0_RIPPLE, FSCHER_REG_FAN0_ACT)
-sysfs_fan(2, FSCHER_REG_FAN1_STATE, FSCHER_REG_FAN1_MIN,
- FSCHER_REG_FAN1_RIPPLE, FSCHER_REG_FAN1_ACT)
-sysfs_fan(3, FSCHER_REG_FAN2_STATE, FSCHER_REG_FAN2_MIN,
- FSCHER_REG_FAN2_RIPPLE, FSCHER_REG_FAN2_ACT)
-
-sysfs_temp(1, FSCHER_REG_TEMP0_STATE, FSCHER_REG_TEMP0_ACT)
-sysfs_temp(2, FSCHER_REG_TEMP1_STATE, FSCHER_REG_TEMP1_ACT)
-sysfs_temp(3, FSCHER_REG_TEMP2_STATE, FSCHER_REG_TEMP2_ACT)
-
-sysfs_in(0, FSCHER_REG_VOLT_12)
-sysfs_in(1, FSCHER_REG_VOLT_5)
-sysfs_in(2, FSCHER_REG_VOLT_BATT)
-
-sysfs_revision(FSCHER_REG_REVISION)
-sysfs_alarms(FSCHER_REG_EVENTS)
-sysfs_control(FSCHER_REG_CONTROL)
-sysfs_watchdog(FSCHER_REG_WDOG_CONTROL, FSCHER_REG_WDOG_STATE, FSCHER_REG_WDOG_PRESET)
-
-static struct attribute *fscher_attributes[] = {
- &dev_attr_revision.attr,
- &dev_attr_alarms.attr,
- &dev_attr_control.attr,
-
- &dev_attr_watchdog_status.attr,
- &dev_attr_watchdog_control.attr,
- &dev_attr_watchdog_preset.attr,
-
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in2_input.attr,
-
- &dev_attr_fan1_status.attr,
- &dev_attr_fan1_div.attr,
- &dev_attr_fan1_input.attr,
- &dev_attr_pwm1.attr,
- &dev_attr_fan2_status.attr,
- &dev_attr_fan2_div.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_pwm2.attr,
- &dev_attr_fan3_status.attr,
- &dev_attr_fan3_div.attr,
- &dev_attr_fan3_input.attr,
- &dev_attr_pwm3.attr,
-
- &dev_attr_temp1_status.attr,
- &dev_attr_temp1_input.attr,
- &dev_attr_temp2_status.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp3_status.attr,
- &dev_attr_temp3_input.attr,
- NULL
-};
-
-static const struct attribute_group fscher_group = {
- .attrs = fscher_attributes,
-};
-
-/*
- * Real code
- */
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int fscher_detect(struct i2c_client *new_client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = new_client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- /* Do the remaining detection unless force or force_fscher parameter */
- if (kind < 0) {
- if ((i2c_smbus_read_byte_data(new_client,
- FSCHER_REG_IDENT_0) != 0x48) /* 'H' */
- || (i2c_smbus_read_byte_data(new_client,
- FSCHER_REG_IDENT_1) != 0x45) /* 'E' */
- || (i2c_smbus_read_byte_data(new_client,
- FSCHER_REG_IDENT_2) != 0x52)) /* 'R' */
- return -ENODEV;
- }
-
- strlcpy(info->type, "fscher", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int fscher_probe(struct i2c_client *new_client,
- const struct i2c_device_id *id)
-{
- struct fscher_data *data;
- int err;
-
- data = kzalloc(sizeof(struct fscher_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(new_client, data);
- data->valid = 0;
- mutex_init(&data->update_lock);
-
- fscher_init_client(new_client);
-
- /* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &fscher_group)))
- goto exit_free;
-
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_files;
- }
-
- return 0;
-
-exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &fscher_group);
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
-static int fscher_remove(struct i2c_client *client)
-{
- struct fscher_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &fscher_group);
-
- kfree(data);
- return 0;
-}
-
-static int fscher_read_value(struct i2c_client *client, u8 reg)
-{
- dev_dbg(&client->dev, "read reg 0x%02x\n", reg);
-
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int fscher_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- dev_dbg(&client->dev, "write reg 0x%02x, val 0x%02x\n",
- reg, value);
-
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Called when we have found a new FSC Hermes. */
-static void fscher_init_client(struct i2c_client *client)
-{
- struct fscher_data *data = i2c_get_clientdata(client);
-
- /* Read revision from chip */
- data->revision = fscher_read_value(client, FSCHER_REG_REVISION);
-}
-
-static struct fscher_data *fscher_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct fscher_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
-
- dev_dbg(&client->dev, "Starting fscher update\n");
-
- data->temp_act[0] = fscher_read_value(client, FSCHER_REG_TEMP0_ACT);
- data->temp_act[1] = fscher_read_value(client, FSCHER_REG_TEMP1_ACT);
- data->temp_act[2] = fscher_read_value(client, FSCHER_REG_TEMP2_ACT);
- data->temp_status[0] = fscher_read_value(client, FSCHER_REG_TEMP0_STATE);
- data->temp_status[1] = fscher_read_value(client, FSCHER_REG_TEMP1_STATE);
- data->temp_status[2] = fscher_read_value(client, FSCHER_REG_TEMP2_STATE);
-
- data->volt[0] = fscher_read_value(client, FSCHER_REG_VOLT_12);
- data->volt[1] = fscher_read_value(client, FSCHER_REG_VOLT_5);
- data->volt[2] = fscher_read_value(client, FSCHER_REG_VOLT_BATT);
-
- data->fan_act[0] = fscher_read_value(client, FSCHER_REG_FAN0_ACT);
- data->fan_act[1] = fscher_read_value(client, FSCHER_REG_FAN1_ACT);
- data->fan_act[2] = fscher_read_value(client, FSCHER_REG_FAN2_ACT);
- data->fan_status[0] = fscher_read_value(client, FSCHER_REG_FAN0_STATE);
- data->fan_status[1] = fscher_read_value(client, FSCHER_REG_FAN1_STATE);
- data->fan_status[2] = fscher_read_value(client, FSCHER_REG_FAN2_STATE);
- data->fan_min[0] = fscher_read_value(client, FSCHER_REG_FAN0_MIN);
- data->fan_min[1] = fscher_read_value(client, FSCHER_REG_FAN1_MIN);
- data->fan_min[2] = fscher_read_value(client, FSCHER_REG_FAN2_MIN);
- data->fan_ripple[0] = fscher_read_value(client, FSCHER_REG_FAN0_RIPPLE);
- data->fan_ripple[1] = fscher_read_value(client, FSCHER_REG_FAN1_RIPPLE);
- data->fan_ripple[2] = fscher_read_value(client, FSCHER_REG_FAN2_RIPPLE);
-
- data->watchdog[0] = fscher_read_value(client, FSCHER_REG_WDOG_PRESET);
- data->watchdog[1] = fscher_read_value(client, FSCHER_REG_WDOG_STATE);
- data->watchdog[2] = fscher_read_value(client, FSCHER_REG_WDOG_CONTROL);
-
- data->global_event = fscher_read_value(client, FSCHER_REG_EVENT_STATE);
- data->global_control = fscher_read_value(client,
- FSCHER_REG_CONTROL);
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
-
-
-
-#define FAN_INDEX_FROM_NUM(nr) ((nr) - 1)
-
-static ssize_t set_fan_status(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* bits 0..1, 3..7 reserved => mask with 0x04 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x04;
-
- mutex_lock(&data->update_lock);
- data->fan_status[FAN_INDEX_FROM_NUM(nr)] &= ~v;
- fscher_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_fan_status(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 0..1, 3..7 reserved => mask with 0x04 */
- return sprintf(buf, "%u\n", data->fan_status[FAN_INDEX_FROM_NUM(nr)] & 0x04);
-}
-
-static ssize_t set_pwm(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- mutex_lock(&data->update_lock);
- data->fan_min[FAN_INDEX_FROM_NUM(nr)] = v > 0xff ? 0xff : v;
- fscher_write_value(client, reg, data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_pwm(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->fan_min[FAN_INDEX_FROM_NUM(nr)]);
-}
-
-static ssize_t set_fan_div(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* supported values: 2, 4, 8 */
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- switch (v) {
- case 2: v = 1; break;
- case 4: v = 2; break;
- case 8: v = 3; break;
- default:
- dev_err(&client->dev, "fan_div value %ld not "
- "supported. Choose one of 2, 4 or 8!\n", v);
- return -EINVAL;
- }
-
- mutex_lock(&data->update_lock);
-
- /* bits 2..7 reserved => mask with 0x03 */
- data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] &= ~0x03;
- data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] |= v;
-
- fscher_write_value(client, reg, data->fan_ripple[FAN_INDEX_FROM_NUM(nr)]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_fan_div(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", 1 << (data->fan_ripple[FAN_INDEX_FROM_NUM(nr)] & 0x03));
-}
-
-#define RPM_FROM_REG(val) (val*60)
-
-static ssize_t show_fan_input (struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[FAN_INDEX_FROM_NUM(nr)]));
-}
-
-
-
-#define TEMP_INDEX_FROM_NUM(nr) ((nr) - 1)
-
-static ssize_t set_temp_status(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* bits 2..7 reserved, 0 read only => mask with 0x02 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
- mutex_lock(&data->update_lock);
- data->temp_status[TEMP_INDEX_FROM_NUM(nr)] &= ~v;
- fscher_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_temp_status(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", data->temp_status[TEMP_INDEX_FROM_NUM(nr)] & 0x03);
-}
-
-#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
-
-static ssize_t show_temp_input(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[TEMP_INDEX_FROM_NUM(nr)]));
-}
-
-/*
- * The final conversion is specified in sensors.conf, as it depends on
- * mainboard specific values. We export the registers contents as
- * pseudo-hundredths-of-Volts (range 0V - 2.55V). Not that it makes much
- * sense per se, but it minimizes the conversions count and keeps the
- * values within a usual range.
- */
-#define VOLT_FROM_REG(val) ((val) * 10)
-
-static ssize_t show_in_input(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[nr]));
-}
-
-
-
-static ssize_t show_revision(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->revision);
-}
-
-
-
-static ssize_t show_alarms(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 2, 5..6 reserved => mask with 0x9b */
- return sprintf(buf, "%u\n", data->global_event & 0x9b);
-}
-
-
-
-static ssize_t set_control(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* bits 1..7 reserved => mask with 0x01 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x01;
-
- mutex_lock(&data->update_lock);
- data->global_control = v;
- fscher_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_control(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 1..7 reserved => mask with 0x01 */
- return sprintf(buf, "%u\n", data->global_control & 0x01);
-}
-
-
-
-static ssize_t set_watchdog_control(struct i2c_client *client, struct
- fscher_data *data, const char *buf, size_t count,
- int nr, int reg)
-{
- /* bits 0..3 reserved => mask with 0xf0 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
-
- mutex_lock(&data->update_lock);
- data->watchdog[2] &= ~0xf0;
- data->watchdog[2] |= v;
- fscher_write_value(client, reg, data->watchdog[2]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_watchdog_control(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 0..3 reserved, bit 5 write only => mask with 0xd0 */
- return sprintf(buf, "%u\n", data->watchdog[2] & 0xd0);
-}
-
-static ssize_t set_watchdog_status(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- /* bits 0, 2..7 reserved => mask with 0x02 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
- mutex_lock(&data->update_lock);
- data->watchdog[1] &= ~v;
- fscher_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_watchdog_status(struct fscher_data *data, char *buf, int nr)
-{
- /* bits 0, 2..7 reserved => mask with 0x02 */
- return sprintf(buf, "%u\n", data->watchdog[1] & 0x02);
-}
-
-static ssize_t set_watchdog_preset(struct i2c_client *client, struct fscher_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
-
- mutex_lock(&data->update_lock);
- data->watchdog[0] = v;
- fscher_write_value(client, reg, data->watchdog[0]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_watchdog_preset(struct fscher_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->watchdog[0]);
-}
-
-static int __init sensors_fscher_init(void)
-{
- return i2c_add_driver(&fscher_driver);
-}
-
-static void __exit sensors_fscher_exit(void)
-{
- i2c_del_driver(&fscher_driver);
-}
-
-MODULE_AUTHOR("Reinhard Nissl <rnissl@gmx.de>");
-MODULE_DESCRIPTION("FSC Hermes driver");
-MODULE_LICENSE("GPL");
-
-module_init(sensors_fscher_init);
-module_exit(sensors_fscher_exit);
static ssize_t watchdog_write(struct file *filp, const char __user *buf,
size_t count, loff_t *offset)
{
- size_t ret;
+ int ret;
struct fschmd_data *data = filp->private_data;
if (count) {
return ret;
}
-static struct file_operations watchdog_fops = {
+static const struct file_operations watchdog_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.open = watchdog_open,
+++ /dev/null
-/*
- fscpos.c - Kernel module for hardware monitoring with FSC Poseidon chips
- Copyright (C) 2004, 2005 Stefan Ott <stefan@desire.ch>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/*
- fujitsu siemens poseidon chip,
- module based on the old fscpos module by Hermann Jung <hej@odn.de> and
- the fscher module by Reinhard Nissl <rnissl@gmx.de>
-
- original module based on lm80.c
- Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
- and Philip Edelbrock <phil@netroedge.com>
-
- Thanks to Jean Delvare for reviewing my code and suggesting a lot of
- improvements.
-*/
-
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/jiffies.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/hwmon.h>
-#include <linux/err.h>
-#include <linux/mutex.h>
-#include <linux/sysfs.h>
-
-/*
- * Addresses to scan
- */
-static const unsigned short normal_i2c[] = { 0x73, I2C_CLIENT_END };
-
-/*
- * Insmod parameters
- */
-I2C_CLIENT_INSMOD_1(fscpos);
-
-/*
- * The FSCPOS registers
- */
-
-/* chip identification */
-#define FSCPOS_REG_IDENT_0 0x00
-#define FSCPOS_REG_IDENT_1 0x01
-#define FSCPOS_REG_IDENT_2 0x02
-#define FSCPOS_REG_REVISION 0x03
-
-/* global control and status */
-#define FSCPOS_REG_EVENT_STATE 0x04
-#define FSCPOS_REG_CONTROL 0x05
-
-/* watchdog */
-#define FSCPOS_REG_WDOG_PRESET 0x28
-#define FSCPOS_REG_WDOG_STATE 0x23
-#define FSCPOS_REG_WDOG_CONTROL 0x21
-
-/* voltages */
-#define FSCPOS_REG_VOLT_12 0x45
-#define FSCPOS_REG_VOLT_5 0x42
-#define FSCPOS_REG_VOLT_BATT 0x48
-
-/* fans - the chip does not support minimum speed for fan2 */
-static u8 FSCPOS_REG_PWM[] = { 0x55, 0x65 };
-static u8 FSCPOS_REG_FAN_ACT[] = { 0x0e, 0x6b, 0xab };
-static u8 FSCPOS_REG_FAN_STATE[] = { 0x0d, 0x62, 0xa2 };
-static u8 FSCPOS_REG_FAN_RIPPLE[] = { 0x0f, 0x6f, 0xaf };
-
-/* temperatures */
-static u8 FSCPOS_REG_TEMP_ACT[] = { 0x64, 0x32, 0x35 };
-static u8 FSCPOS_REG_TEMP_STATE[] = { 0x71, 0x81, 0x91 };
-
-/*
- * Functions declaration
- */
-static int fscpos_probe(struct i2c_client *client,
- const struct i2c_device_id *id);
-static int fscpos_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info);
-static int fscpos_remove(struct i2c_client *client);
-
-static int fscpos_read_value(struct i2c_client *client, u8 reg);
-static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value);
-static struct fscpos_data *fscpos_update_device(struct device *dev);
-static void fscpos_init_client(struct i2c_client *client);
-
-static void reset_fan_alarm(struct i2c_client *client, int nr);
-
-/*
- * Driver data (common to all clients)
- */
-static const struct i2c_device_id fscpos_id[] = {
- { "fscpos", fscpos },
- { }
-};
-
-static struct i2c_driver fscpos_driver = {
- .class = I2C_CLASS_HWMON,
- .driver = {
- .name = "fscpos",
- },
- .probe = fscpos_probe,
- .remove = fscpos_remove,
- .id_table = fscpos_id,
- .detect = fscpos_detect,
- .address_data = &addr_data,
-};
-
-/*
- * Client data (each client gets its own)
- */
-struct fscpos_data {
- struct device *hwmon_dev;
- struct mutex update_lock;
- char valid; /* 0 until following fields are valid */
- unsigned long last_updated; /* In jiffies */
-
- /* register values */
- u8 revision; /* revision of chip */
- u8 global_event; /* global event status */
- u8 global_control; /* global control register */
- u8 wdog_control; /* watchdog control */
- u8 wdog_state; /* watchdog status */
- u8 wdog_preset; /* watchdog preset */
- u8 volt[3]; /* 12, 5, battery current */
- u8 temp_act[3]; /* temperature */
- u8 temp_status[3]; /* status of sensor */
- u8 fan_act[3]; /* fans revolutions per second */
- u8 fan_status[3]; /* fan status */
- u8 pwm[2]; /* fan min value for rps */
- u8 fan_ripple[3]; /* divider for rps */
-};
-
-/* Temperature */
-#define TEMP_FROM_REG(val) (((val) - 128) * 1000)
-
-static ssize_t show_temp_input(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_act[nr - 1]));
-}
-
-static ssize_t show_temp_status(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", data->temp_status[nr - 1] & 0x03);
-}
-
-static ssize_t show_temp_reset(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "1\n");
-}
-
-static ssize_t set_temp_reset(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10);
- if (v != 1) {
- dev_err(&client->dev, "temp_reset value %ld not supported. "
- "Use 1 to reset the alarm!\n", v);
- return -EINVAL;
- }
-
- dev_info(&client->dev, "You used the temp_reset feature which has not "
- "been proplerly tested. Please report your "
- "experience to the module author.\n");
-
- /* Supported value: 2 (clears the status) */
- fscpos_write_value(client, FSCPOS_REG_TEMP_STATE[nr - 1], 2);
- return count;
-}
-
-/* Fans */
-#define RPM_FROM_REG(val) ((val) * 60)
-
-static ssize_t show_fan_status(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 0..1, 3..7 reserved => mask with 0x04 */
- return sprintf(buf, "%u\n", data->fan_status[nr - 1] & 0x04);
-}
-
-static ssize_t show_fan_input(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", RPM_FROM_REG(data->fan_act[nr - 1]));
-}
-
-static ssize_t show_fan_ripple(struct fscpos_data *data, char *buf, int nr)
-{
- /* bits 2..7 reserved => mask with 0x03 */
- return sprintf(buf, "%u\n", data->fan_ripple[nr - 1] & 0x03);
-}
-
-static ssize_t set_fan_ripple(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int nr, int reg)
-{
- /* supported values: 2, 4, 8 */
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- switch (v) {
- case 2: v = 1; break;
- case 4: v = 2; break;
- case 8: v = 3; break;
- default:
- dev_err(&client->dev, "fan_ripple value %ld not supported. "
- "Must be one of 2, 4 or 8!\n", v);
- return -EINVAL;
- }
-
- mutex_lock(&data->update_lock);
- /* bits 2..7 reserved => mask with 0x03 */
- data->fan_ripple[nr - 1] &= ~0x03;
- data->fan_ripple[nr - 1] |= v;
-
- fscpos_write_value(client, reg, data->fan_ripple[nr - 1]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_pwm(struct fscpos_data *data, char *buf, int nr)
-{
- return sprintf(buf, "%u\n", data->pwm[nr - 1]);
-}
-
-static ssize_t set_pwm(struct i2c_client *client, struct fscpos_data *data,
- const char *buf, size_t count, int nr, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10);
-
- /* Range: 0..255 */
- if (v < 0) v = 0;
- if (v > 255) v = 255;
-
- mutex_lock(&data->update_lock);
- data->pwm[nr - 1] = v;
- fscpos_write_value(client, reg, data->pwm[nr - 1]);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static void reset_fan_alarm(struct i2c_client *client, int nr)
-{
- fscpos_write_value(client, FSCPOS_REG_FAN_STATE[nr], 4);
-}
-
-/* Volts */
-#define VOLT_FROM_REG(val, mult) ((val) * (mult) / 255)
-
-static ssize_t show_volt_12(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[0], 14200));
-}
-
-static ssize_t show_volt_5(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[1], 6600));
-}
-
-static ssize_t show_volt_batt(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", VOLT_FROM_REG(data->volt[2], 3300));
-}
-
-/* Watchdog */
-static ssize_t show_wdog_control(struct fscpos_data *data, char *buf)
-{
- /* bits 0..3 reserved, bit 6 write only => mask with 0xb0 */
- return sprintf(buf, "%u\n", data->wdog_control & 0xb0);
-}
-
-static ssize_t set_wdog_control(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- /* bits 0..3 reserved => mask with 0xf0 */
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xf0;
-
- mutex_lock(&data->update_lock);
- data->wdog_control &= ~0xf0;
- data->wdog_control |= v;
- fscpos_write_value(client, reg, data->wdog_control);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_wdog_state(struct fscpos_data *data, char *buf)
-{
- /* bits 0, 2..7 reserved => mask with 0x02 */
- return sprintf(buf, "%u\n", data->wdog_state & 0x02);
-}
-
-static ssize_t set_wdog_state(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0x02;
-
- /* Valid values: 2 (clear) */
- if (v != 2) {
- dev_err(&client->dev, "wdog_state value %ld not supported. "
- "Must be 2 to clear the state!\n", v);
- return -EINVAL;
- }
-
- mutex_lock(&data->update_lock);
- data->wdog_state &= ~v;
- fscpos_write_value(client, reg, v);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-static ssize_t show_wdog_preset(struct fscpos_data *data, char *buf)
-{
- return sprintf(buf, "%u\n", data->wdog_preset);
-}
-
-static ssize_t set_wdog_preset(struct i2c_client *client, struct fscpos_data
- *data, const char *buf, size_t count, int reg)
-{
- unsigned long v = simple_strtoul(buf, NULL, 10) & 0xff;
-
- mutex_lock(&data->update_lock);
- data->wdog_preset = v;
- fscpos_write_value(client, reg, data->wdog_preset);
- mutex_unlock(&data->update_lock);
- return count;
-}
-
-/* Event */
-static ssize_t show_event(struct device *dev, struct device_attribute *attr, char *buf)
-{
- /* bits 5..7 reserved => mask with 0x1f */
- struct fscpos_data *data = fscpos_update_device(dev);
- return sprintf(buf, "%u\n", data->global_event & 0x9b);
-}
-
-/*
- * Sysfs stuff
- */
-#define create_getter(kind, sub) \
- static ssize_t sysfs_show_##kind##sub(struct device *dev, struct device_attribute *attr, char *buf) \
- { \
- struct fscpos_data *data = fscpos_update_device(dev); \
- return show_##kind##sub(data, buf); \
- }
-
-#define create_getter_n(kind, offset, sub) \
- static ssize_t sysfs_show_##kind##offset##sub(struct device *dev, struct device_attribute *attr, char\
- *buf) \
- { \
- struct fscpos_data *data = fscpos_update_device(dev); \
- return show_##kind##sub(data, buf, offset); \
- }
-
-#define create_setter(kind, sub, reg) \
- static ssize_t sysfs_set_##kind##sub (struct device *dev, struct device_attribute *attr, const char \
- *buf, size_t count) \
- { \
- struct i2c_client *client = to_i2c_client(dev); \
- struct fscpos_data *data = i2c_get_clientdata(client); \
- return set_##kind##sub(client, data, buf, count, reg); \
- }
-
-#define create_setter_n(kind, offset, sub, reg) \
- static ssize_t sysfs_set_##kind##offset##sub (struct device *dev, struct device_attribute *attr, \
- const char *buf, size_t count) \
- { \
- struct i2c_client *client = to_i2c_client(dev); \
- struct fscpos_data *data = i2c_get_clientdata(client); \
- return set_##kind##sub(client, data, buf, count, offset, reg);\
- }
-
-#define create_sysfs_device_ro(kind, sub, offset) \
- static DEVICE_ATTR(kind##offset##sub, S_IRUGO, \
- sysfs_show_##kind##offset##sub, NULL);
-
-#define create_sysfs_device_rw(kind, sub, offset) \
- static DEVICE_ATTR(kind##offset##sub, S_IRUGO | S_IWUSR, \
- sysfs_show_##kind##offset##sub, sysfs_set_##kind##offset##sub);
-
-#define sysfs_ro_n(kind, sub, offset) \
- create_getter_n(kind, offset, sub); \
- create_sysfs_device_ro(kind, sub, offset);
-
-#define sysfs_rw_n(kind, sub, offset, reg) \
- create_getter_n(kind, offset, sub); \
- create_setter_n(kind, offset, sub, reg); \
- create_sysfs_device_rw(kind, sub, offset);
-
-#define sysfs_rw(kind, sub, reg) \
- create_getter(kind, sub); \
- create_setter(kind, sub, reg); \
- create_sysfs_device_rw(kind, sub,);
-
-#define sysfs_fan_with_min(offset, reg_status, reg_ripple, reg_min) \
- sysfs_fan(offset, reg_status, reg_ripple); \
- sysfs_rw_n(pwm,, offset, reg_min);
-
-#define sysfs_fan(offset, reg_status, reg_ripple) \
- sysfs_ro_n(fan, _input, offset); \
- sysfs_ro_n(fan, _status, offset); \
- sysfs_rw_n(fan, _ripple, offset, reg_ripple);
-
-#define sysfs_temp(offset, reg_status) \
- sysfs_ro_n(temp, _input, offset); \
- sysfs_ro_n(temp, _status, offset); \
- sysfs_rw_n(temp, _reset, offset, reg_status);
-
-#define sysfs_watchdog(reg_wdog_preset, reg_wdog_state, reg_wdog_control) \
- sysfs_rw(wdog, _control, reg_wdog_control); \
- sysfs_rw(wdog, _preset, reg_wdog_preset); \
- sysfs_rw(wdog, _state, reg_wdog_state);
-
-sysfs_fan_with_min(1, FSCPOS_REG_FAN_STATE[0], FSCPOS_REG_FAN_RIPPLE[0],
- FSCPOS_REG_PWM[0]);
-sysfs_fan_with_min(2, FSCPOS_REG_FAN_STATE[1], FSCPOS_REG_FAN_RIPPLE[1],
- FSCPOS_REG_PWM[1]);
-sysfs_fan(3, FSCPOS_REG_FAN_STATE[2], FSCPOS_REG_FAN_RIPPLE[2]);
-
-sysfs_temp(1, FSCPOS_REG_TEMP_STATE[0]);
-sysfs_temp(2, FSCPOS_REG_TEMP_STATE[1]);
-sysfs_temp(3, FSCPOS_REG_TEMP_STATE[2]);
-
-sysfs_watchdog(FSCPOS_REG_WDOG_PRESET, FSCPOS_REG_WDOG_STATE,
- FSCPOS_REG_WDOG_CONTROL);
-
-static DEVICE_ATTR(event, S_IRUGO, show_event, NULL);
-static DEVICE_ATTR(in0_input, S_IRUGO, show_volt_12, NULL);
-static DEVICE_ATTR(in1_input, S_IRUGO, show_volt_5, NULL);
-static DEVICE_ATTR(in2_input, S_IRUGO, show_volt_batt, NULL);
-
-static struct attribute *fscpos_attributes[] = {
- &dev_attr_event.attr,
- &dev_attr_in0_input.attr,
- &dev_attr_in1_input.attr,
- &dev_attr_in2_input.attr,
-
- &dev_attr_wdog_control.attr,
- &dev_attr_wdog_preset.attr,
- &dev_attr_wdog_state.attr,
-
- &dev_attr_temp1_input.attr,
- &dev_attr_temp1_status.attr,
- &dev_attr_temp1_reset.attr,
- &dev_attr_temp2_input.attr,
- &dev_attr_temp2_status.attr,
- &dev_attr_temp2_reset.attr,
- &dev_attr_temp3_input.attr,
- &dev_attr_temp3_status.attr,
- &dev_attr_temp3_reset.attr,
-
- &dev_attr_fan1_input.attr,
- &dev_attr_fan1_status.attr,
- &dev_attr_fan1_ripple.attr,
- &dev_attr_pwm1.attr,
- &dev_attr_fan2_input.attr,
- &dev_attr_fan2_status.attr,
- &dev_attr_fan2_ripple.attr,
- &dev_attr_pwm2.attr,
- &dev_attr_fan3_input.attr,
- &dev_attr_fan3_status.attr,
- &dev_attr_fan3_ripple.attr,
- NULL
-};
-
-static const struct attribute_group fscpos_group = {
- .attrs = fscpos_attributes,
-};
-
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int fscpos_detect(struct i2c_client *new_client, int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = new_client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- /* Do the remaining detection unless force or force_fscpos parameter */
- if (kind < 0) {
- if ((fscpos_read_value(new_client, FSCPOS_REG_IDENT_0)
- != 0x50) /* 'P' */
- || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_1)
- != 0x45) /* 'E' */
- || (fscpos_read_value(new_client, FSCPOS_REG_IDENT_2)
- != 0x47))/* 'G' */
- return -ENODEV;
- }
-
- strlcpy(info->type, "fscpos", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int fscpos_probe(struct i2c_client *new_client,
- const struct i2c_device_id *id)
-{
- struct fscpos_data *data;
- int err;
-
- data = kzalloc(sizeof(struct fscpos_data), GFP_KERNEL);
- if (!data) {
- err = -ENOMEM;
- goto exit;
- }
-
- i2c_set_clientdata(new_client, data);
- data->valid = 0;
- mutex_init(&data->update_lock);
-
- /* Inizialize the fscpos chip */
- fscpos_init_client(new_client);
-
- /* Announce that the chip was found */
- dev_info(&new_client->dev, "Found fscpos chip, rev %u\n", data->revision);
-
- /* Register sysfs hooks */
- if ((err = sysfs_create_group(&new_client->dev.kobj, &fscpos_group)))
- goto exit_free;
-
- data->hwmon_dev = hwmon_device_register(&new_client->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto exit_remove_files;
- }
-
- return 0;
-
-exit_remove_files:
- sysfs_remove_group(&new_client->dev.kobj, &fscpos_group);
-exit_free:
- kfree(data);
-exit:
- return err;
-}
-
-static int fscpos_remove(struct i2c_client *client)
-{
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- hwmon_device_unregister(data->hwmon_dev);
- sysfs_remove_group(&client->dev.kobj, &fscpos_group);
-
- kfree(data);
- return 0;
-}
-
-static int fscpos_read_value(struct i2c_client *client, u8 reg)
-{
- dev_dbg(&client->dev, "Read reg 0x%02x\n", reg);
- return i2c_smbus_read_byte_data(client, reg);
-}
-
-static int fscpos_write_value(struct i2c_client *client, u8 reg, u8 value)
-{
- dev_dbg(&client->dev, "Write reg 0x%02x, val 0x%02x\n", reg, value);
- return i2c_smbus_write_byte_data(client, reg, value);
-}
-
-/* Called when we have found a new FSCPOS chip */
-static void fscpos_init_client(struct i2c_client *client)
-{
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- /* read revision from chip */
- data->revision = fscpos_read_value(client, FSCPOS_REG_REVISION);
-}
-
-static struct fscpos_data *fscpos_update_device(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
- struct fscpos_data *data = i2c_get_clientdata(client);
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
- int i;
-
- dev_dbg(&client->dev, "Starting fscpos update\n");
-
- for (i = 0; i < 3; i++) {
- data->temp_act[i] = fscpos_read_value(client,
- FSCPOS_REG_TEMP_ACT[i]);
- data->temp_status[i] = fscpos_read_value(client,
- FSCPOS_REG_TEMP_STATE[i]);
- data->fan_act[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_ACT[i]);
- data->fan_status[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_STATE[i]);
- data->fan_ripple[i] = fscpos_read_value(client,
- FSCPOS_REG_FAN_RIPPLE[i]);
- if (i < 2) {
- /* fan2_min is not supported by the chip */
- data->pwm[i] = fscpos_read_value(client,
- FSCPOS_REG_PWM[i]);
- }
- /* reset fan status if speed is back to > 0 */
- if (data->fan_status[i] != 0 && data->fan_act[i] > 0) {
- reset_fan_alarm(client, i);
- }
- }
-
- data->volt[0] = fscpos_read_value(client, FSCPOS_REG_VOLT_12);
- data->volt[1] = fscpos_read_value(client, FSCPOS_REG_VOLT_5);
- data->volt[2] = fscpos_read_value(client, FSCPOS_REG_VOLT_BATT);
-
- data->wdog_preset = fscpos_read_value(client,
- FSCPOS_REG_WDOG_PRESET);
- data->wdog_state = fscpos_read_value(client,
- FSCPOS_REG_WDOG_STATE);
- data->wdog_control = fscpos_read_value(client,
- FSCPOS_REG_WDOG_CONTROL);
-
- data->global_event = fscpos_read_value(client,
- FSCPOS_REG_EVENT_STATE);
-
- data->last_updated = jiffies;
- data->valid = 1;
- }
- mutex_unlock(&data->update_lock);
- return data;
-}
-
-static int __init sm_fscpos_init(void)
-{
- return i2c_add_driver(&fscpos_driver);
-}
-
-static void __exit sm_fscpos_exit(void)
-{
- i2c_del_driver(&fscpos_driver);
-}
-
-MODULE_AUTHOR("Stefan Ott <stefan@desire.ch> based on work from Hermann Jung "
- "<hej@odn.de>, Frodo Looijaard <frodol@dds.nl>"
- " and Philip Edelbrock <phil@netroedge.com>");
-MODULE_DESCRIPTION("fujitsu siemens poseidon chip driver");
-MODULE_LICENSE("GPL");
-
-module_init(sm_fscpos_init);
-module_exit(sm_fscpos_exit);
AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted),
AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
- AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("NC6730b", "HP Compaq 6730b", xy_rotated_left_usd),
+ AXIS_DMI_MATCH("NC6730s", "HP Compaq 6730s", xy_swap),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted),
AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
+ AXIS_DMI_MATCH("NC693xx", "HP EliteBook 853", xy_swap),
/* Intel-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_I",
PRODUCT_NAME, "HP Pavilion dv5",
y_inverted),
AXIS_DMI_MATCH("DV7", "HP Pavilion dv7", x_inverted),
AXIS_DMI_MATCH("HP8710", "HP Compaq 8710", y_inverted),
+ AXIS_DMI_MATCH("HDX18", "HP HDX 18", x_inverted),
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
chip_type, *address, sio_data->revision);
/* Read GPIO config and VID value from LDN 7 (GPIO) */
- if (chip_type != IT8705F_DEVID) {
+ if (sio_data->type != it87) {
int reg;
superio_select(GPIO);
- if ((chip_type == it8718) ||
- (chip_type == it8720))
+ if (sio_data->type == it8718 || sio_data->type == it8720)
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
struct lis3lv02d *lis3 = spi_get_drvdata(spi);
lis3lv02d_joystick_disable();
lis3lv02d_poweroff(lis3);
- return 0;
+
+ return lis3lv02d_remove_fs(&lis3_dev);
}
#ifdef CONFIG_PM
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4215);
-
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4215_cmd {
LTC4215_CONTROL = 0x00, /* rw */
static int ltc4215_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct i2c_adapter *adapter = client->adapter;
struct ltc4215_data *data;
int ret;
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
mutex_init(&data->update_lock);
/* Initialize the LTC4215 chip */
- /* TODO */
+ i2c_smbus_write_byte_data(client, LTC4215_FAULT, 0x00);
/* Register sysfs hooks */
ret = sysfs_create_group(&client->dev.kobj, <c4215_group);
return 0;
}
-static int ltc4215_detect(struct i2c_client *client,
- int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- if (kind < 0) { /* probed detection - check the chip type */
- s32 v; /* 8 bits from the chip, or -ERRNO */
-
- /*
- * Register 0x01 bit b7 is reserved, expect 0
- * Register 0x03 bit b6 and b7 are reserved, expect 0
- */
- v = i2c_smbus_read_byte_data(client, LTC4215_ALERT);
- if (v < 0 || (v & (1 << 7)) != 0)
- return -ENODEV;
-
- v = i2c_smbus_read_byte_data(client, LTC4215_FAULT);
- if (v < 0 || (v & ((1 << 6) | (1 << 7))) != 0)
- return -ENODEV;
- }
-
- strlcpy(info->type, "ltc4215", I2C_NAME_SIZE);
- dev_info(&adapter->dev, "ltc4215 %s at address 0x%02x\n",
- kind < 0 ? "probed" : "forced",
- client->addr);
-
- return 0;
-}
-
static const struct i2c_device_id ltc4215_id[] = {
- { "ltc4215", ltc4215 },
+ { "ltc4215", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4215_id);
/* This is the driver that will be inserted */
static struct i2c_driver ltc4215_driver = {
- .class = I2C_CLASS_HWMON,
.driver = {
.name = "ltc4215",
},
.probe = ltc4215_probe,
.remove = ltc4215_remove,
.id_table = ltc4215_id,
- .detect = ltc4215_detect,
- .address_data = &addr_data,
};
static int __init ltc4215_init(void)
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
-/* Valid addresses are 0x20 - 0x3f
- *
- * For now, we do not probe, since some of these addresses
- * are known to be unfriendly to probing */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4245);
-
/* Here are names of the chip's registers (a.k.a. commands) */
enum ltc4245_cmd {
LTC4245_STATUS = 0x00, /* readonly */
static int ltc4245_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
+ struct i2c_adapter *adapter = client->adapter;
struct ltc4245_data *data;
int ret;
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+ return -ENODEV;
+
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
ret = -ENOMEM;
mutex_init(&data->update_lock);
/* Initialize the LTC4245 chip */
- /* TODO */
+ i2c_smbus_write_byte_data(client, LTC4245_FAULT1, 0x00);
+ i2c_smbus_write_byte_data(client, LTC4245_FAULT2, 0x00);
/* Register sysfs hooks */
ret = sysfs_create_group(&client->dev.kobj, <c4245_group);
return 0;
}
-/* Check that some bits in a control register appear at all possible
- * locations without changing value
- *
- * @client: the i2c client to use
- * @reg: the register to read
- * @bits: the bits to check (0xff checks all bits,
- * 0x03 checks only the last two bits)
- *
- * return -ERRNO if the register read failed
- * return -ENODEV if the register value doesn't stay constant at all
- * possible addresses
- *
- * return 0 for success
- */
-static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits)
-{
- int i;
- s32 v, voff1, voff2;
-
- /* Read register and check for error */
- v = i2c_smbus_read_byte_data(client, reg);
- if (v < 0)
- return v;
-
- v &= bits;
-
- for (i = 0x00; i < 0xff; i += 0x20) {
-
- voff1 = i2c_smbus_read_byte_data(client, reg + i);
- if (voff1 < 0)
- return voff1;
-
- voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08);
- if (voff2 < 0)
- return voff2;
-
- voff1 &= bits;
- voff2 &= bits;
-
- if (v != voff1 || v != voff2)
- return -ENODEV;
- }
-
- return 0;
-}
-
-static int ltc4245_detect(struct i2c_client *client,
- int kind,
- struct i2c_board_info *info)
-{
- struct i2c_adapter *adapter = client->adapter;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return -ENODEV;
-
- if (kind < 0) { /* probed detection - check the chip type */
- s32 v; /* 8 bits from the chip, or -ERRNO */
-
- /* Chip registers 0x00-0x07 are control registers
- * Chip registers 0x10-0x1f are data registers
- *
- * Address bits b7-b5 are ignored. This makes the chip "repeat"
- * in steps of 0x20. Any control registers should appear with
- * the same values across all duplicated addresses.
- *
- * Register 0x02 bit b2 is reserved, expect 0
- * Register 0x07 bits b7 to b4 are reserved, expect 0
- *
- * Registers 0x01, 0x02 are control registers and should not
- * change on their own.
- *
- * Register 0x06 bits b6 and b7 are control bits, and should
- * not change on their own.
- *
- * Register 0x07 bits b3 to b0 are control bits, and should
- * not change on their own.
- */
-
- /* read register 0x02 reserved bit, expect 0 */
- v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL);
- if (v < 0 || (v & 0x04) != 0)
- return -ENODEV;
-
- /* read register 0x07 reserved bits, expect 0 */
- v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR);
- if (v < 0 || (v & 0xf0) != 0)
- return -ENODEV;
-
- /* check that the alert register appears at all locations */
- if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff))
- return -ENODEV;
-
- /* check that the control register appears at all locations */
- if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff))
- return -ENODEV;
-
- /* check that register 0x06 bits b6 and b7 stay constant */
- if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0))
- return -ENODEV;
-
- /* check that register 0x07 bits b3-b0 stay constant */
- if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f))
- return -ENODEV;
- }
-
- strlcpy(info->type, "ltc4245", I2C_NAME_SIZE);
- dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n",
- kind < 0 ? "probed" : "forced",
- client->addr);
-
- return 0;
-}
-
static const struct i2c_device_id ltc4245_id[] = {
- { "ltc4245", ltc4245 },
+ { "ltc4245", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ltc4245_id);
/* This is the driver that will be inserted */
static struct i2c_driver ltc4245_driver = {
- .class = I2C_CLASS_HWMON,
.driver = {
.name = "ltc4245",
},
.probe = ltc4245_probe,
.remove = ltc4245_remove,
.id_table = ltc4245_id,
- .detect = ltc4245_detect,
- .address_data = &addr_data,
};
static int __init ltc4245_init(void)
#include <linux/hwmon-sysfs.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/err.h>
}
-static struct platform_driver sht_drivers[] = {
+/*
+ * sht_drivers simultaneously refers to __devinit and __devexit function
+ * which causes spurious section mismatch warning. So use __refdata to
+ * get rid from this.
+ */
+static struct platform_driver __refdata sht_drivers[] = {
{
.driver = {
.name = "sht10",
will be called i2c-pnx.
config I2C_PXA
- tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
- depends on EXPERIMENTAL && ARCH_PXA
+ tristate "Intel PXA2XX I2C adapter"
+ depends on ARCH_PXA || ARCH_MMP
help
If you have devices in the PXA I2C bus, say yes to this option.
This driver can also be built as a module. If so, the module
error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
amd756_driver.name);
if (error)
- return error;
+ return -ENODEV;
if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
smbus->size = pci_resource_len(dev, 0);
error = acpi_check_resource_conflict(&dev->resource[0]);
- if (error)
+ if (error) {
+ error = -ENODEV;
goto out_kfree;
+ }
if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
error = -EBUSY;
}
err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
- if (err)
+ if (err) {
+ err = -ENODEV;
goto exit;
+ }
err = pci_request_region(dev, SMBBAR, i801_driver.name);
if (err) {
wait_queue_head_t queue;
unsigned long i2csr;
unsigned int disable_delay;
+ int stopped;
+ unsigned int ifdr; /* IMX_I2C_IFDR */
};
/** Functions for IMX I2C adapter driver ***************************************
*******************************************************************************/
-static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx)
+static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
{
unsigned long orig_jiffies = jiffies;
+ unsigned int temp;
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- /* wait for bus not busy */
- while (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_IBB) {
+ while (1) {
+ temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+ if (for_busy && (temp & I2SR_IBB))
+ break;
+ if (!for_busy && !(temp & I2SR_IBB))
+ break;
if (signal_pending(current)) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> I2C Interrupted\n", __func__);
return 0;
}
-static void i2c_imx_start(struct imx_i2c_struct *i2c_imx)
+static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
{
unsigned int temp = 0;
+ int result;
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+ clk_enable(i2c_imx->clk);
+ writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
/* Enable I2C controller */
+ writeb(0, i2c_imx->base + IMX_I2C_I2SR);
writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR);
+
+ /* Wait controller to be stable */
+ udelay(50);
+
/* Start I2C transaction */
temp = readb(i2c_imx->base + IMX_I2C_I2CR);
temp |= I2CR_MSTA;
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ result = i2c_imx_bus_busy(i2c_imx, 1);
+ if (result)
+ return result;
+ i2c_imx->stopped = 0;
+
temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ return result;
}
static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
{
unsigned int temp = 0;
- /* Stop I2C transaction */
- dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- temp = readb(i2c_imx->base + IMX_I2C_I2CR);
- temp &= ~I2CR_MSTA;
- writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
- /* setup chip registers to defaults */
- writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR);
- writeb(0, i2c_imx->base + IMX_I2C_I2SR);
- /*
- * This delay caused by an i.MXL hardware bug.
- * If no (or too short) delay, no "STOP" bit will be generated.
- */
- udelay(i2c_imx->disable_delay);
+ if (!i2c_imx->stopped) {
+ /* Stop I2C transaction */
+ dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
+ temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
+ writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ i2c_imx->stopped = 1;
+ }
+ if (cpu_is_mx1()) {
+ /*
+ * This delay caused by an i.MXL hardware bug.
+ * If no (or too short) delay, no "STOP" bit will be generated.
+ */
+ udelay(i2c_imx->disable_delay);
+ }
+
+ if (!i2c_imx->stopped)
+ i2c_imx_bus_busy(i2c_imx, 0);
+
/* Disable I2C controller */
writeb(0, i2c_imx->base + IMX_I2C_I2CR);
+ clk_disable(i2c_imx->clk);
}
static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
else
for (i = 0; i2c_clk_div[i][0] < div; i++);
- /* Write divider value to register */
- writeb(i2c_clk_div[i][1], i2c_imx->base + IMX_I2C_IFDR);
+ /* Store divider value */
+ i2c_imx->ifdr = i2c_clk_div[i][1];
/*
* There dummy delay is calculated.
if (result)
return result;
if (i == (msgs->len - 1)) {
+ /* It must generate STOP before read I2DR to prevent
+ controller from generating another clock cycle */
dev_dbg(&i2c_imx->adapter.dev,
"<%s> clear MSTA\n", __func__);
temp = readb(i2c_imx->base + IMX_I2C_I2CR);
- temp &= ~I2CR_MSTA;
+ temp &= ~(I2CR_MSTA | I2CR_MTX);
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ i2c_imx_bus_busy(i2c_imx, 0);
+ i2c_imx->stopped = 1;
} else if (i == (msgs->len - 2)) {
dev_dbg(&i2c_imx->adapter.dev,
"<%s> set TXAK\n", __func__);
dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
- /* Check if i2c bus is not busy */
- result = i2c_imx_bus_busy(i2c_imx);
+ /* Start I2C transfer */
+ result = i2c_imx_start(i2c_imx);
if (result)
goto fail0;
- /* Start I2C transfer */
- i2c_imx_start(i2c_imx);
-
/* read/write data */
for (i = 0; i < num; i++) {
if (i) {
temp = readb(i2c_imx->base + IMX_I2C_I2CR);
temp |= I2CR_RSTA;
writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+ result = i2c_imx_bus_busy(i2c_imx, 1);
+ if (result)
+ goto fail0;
}
dev_dbg(&i2c_imx->adapter.dev,
"<%s> transfer message: %d\n", __func__, i);
dev_err(&pdev->dev, "can't get I2C clock\n");
goto fail3;
}
- clk_enable(i2c_imx->clk);
/* Request IRQ */
ret = request_irq(i2c_imx->irq, i2c_imx_isr, 0, pdev->name, i2c_imx);
fail5:
free_irq(i2c_imx->irq, i2c_imx);
fail4:
- clk_disable(i2c_imx->clk);
clk_put(i2c_imx->clk);
fail3:
release_mem_region(i2c_imx->res->start, resource_size(res));
if (pdata && pdata->exit)
pdata->exit(&pdev->dev);
- /* Disable I2C clock */
- clk_disable(i2c_imx->clk);
clk_put(i2c_imx->clk);
release_mem_region(i2c_imx->res->start, resource_size(i2c_imx->res));
return -ENODEV;
}
if (acpi_check_region(sch_smba, SMBIOSIZE, sch_driver.name))
- return -EBUSY;
+ return -ENODEV;
if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) {
dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
sch_smba);
unsigned timeout = i2c->adap.timeout;
u32 flags = restart ? CCR_RSTA : 0;
- /* Start with MEN */
- if (!restart)
- writeccr(i2c, CCR_MEN);
/* Start as master */
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
/* Write target byte */
int i, result;
u32 flags = restart ? CCR_RSTA : 0;
- /* Start with MEN */
- if (!restart)
- writeccr(i2c, CCR_MEN);
/* Switch to read - restart */
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags);
/* Write target address byte - this time with the read flag set */
/* Generate txack on next to last byte */
if (i == length - 2)
writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK);
- /* Generate stop on last byte */
+ /* Do not generate stop on last byte */
if (i == length - 1)
- writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK);
+ writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX);
data[i] = readb(i2c->base + MPC_I2C_DR);
}
}
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
- return -EBUSY;
+ return -ENODEV;
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
- return -EBUSY;
+ return -ENODEV;
if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
goto err;
snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
- "SMBus CMI adapter %s (%s)",
- acpi_device_name(device),
- acpi_device_uid(device));
+ "SMBus CMI adapter %s",
+ acpi_device_name(device));
smbus_cmi->adapter.owner = THIS_MODULE;
smbus_cmi->adapter.algo = &acpi_smbus_cmi_algorithm;
smbus_cmi->adapter.algo_data = smbus_cmi;
retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
if (retval)
- return retval;
+ return -ENODEV;
/* Everything is happy, let's grab the memory and set things up. */
if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
found:
error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
if (error)
- return error;
+ return -ENODEV;
if (!request_region(vt596_smba, 8, vt596_driver.name)) {
dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_SB900_IDE), 0 },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
.enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
.port_ops = &cmd64x_port_ops,
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
- IDE_HFLAG_ABUSE_PREFETCH,
+ IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_SERIALIZE,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = 0x00, /* no udma */
.init_chipset = init_chipset_cmd64x,
.enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
.port_ops = &cmd648_port_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
+ .host_flags = IDE_HFLAG_ABUSE_PREFETCH |
+ IDE_HFLAG_SERIALIZE,
.pio_mask = ATA_PIO5,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
static void proc_ide_settings_warn(void)
{
- static int warned;
-
- if (warned)
- return;
-
- printk(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is "
+ printk_once(KERN_WARNING "Warning: /proc/ide/hd?/settings interface is "
"obsolete, and will be removed soon!\n");
- warned = 1;
}
static int ide_settings_proc_show(struct seq_file *m, void *v)
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
* Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ * Copyright (C) 2007-2009 Bartlomiej Zolnierkiewicz
*
* May be copied or modified under the terms of the GNU General Public License
*
pci_read_config_byte(dev, 0x4b, ®4bh);
+ rw_prefetch = reg4bh & ~(0x11 << drive->dn);
+
if (drive->media == ide_disk)
- rw_prefetch = 0x11 << drive->dn;
+ rw_prefetch |= 0x11 << drive->dn;
- if ((reg4bh & (0x11 << drive->dn)) != rw_prefetch)
- pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
+ if (reg4bh != rw_prefetch)
+ pci_write_config_byte(dev, 0x4b, rw_prefetch);
}
static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
#include <asm/idle.h>
-#include "../dma/ioatdma_hw.h"
-#include "../dma/ioatdma_registers.h"
+#include "../dma/ioat/hw.h"
+#include "../dma/ioat/registers.h"
#define I7300_IDLE_DRIVER_VERSION "1.55"
#define I7300_PRINT "i7300_idle:"
udelay(10);
sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+ IOAT_CHANSTS_STATUS;
- if (sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE)
+ if (sts != IOAT_CHANSTS_ACTIVE)
break;
}
udelay(1000);
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+ IOAT_CHANSTS_STATUS;
- if (chan_sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_DONE) {
+ if (chan_sts != IOAT_CHANSTS_DONE) {
/* Not complete, reset the channel */
writeb(IOAT_CHANCMD_RESET,
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
ioat_chanbase + IOAT1_CHANCMD_OFFSET);
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+ IOAT_CHANSTS_STATUS;
- if (chan_sts != IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE) {
+ if (chan_sts != IOAT_CHANSTS_ACTIVE) {
writew(0, ioat_chanbase + IOAT_CHANCTRL_OFFSET);
break;
}
}
chan_sts = readq(ioat_chanbase + IOAT1_CHANSTS_OFFSET) &
- IOAT_CHANSTS_DMA_TRANSFER_STATUS;
+ IOAT_CHANSTS_STATUS;
/*
* We tried to reset multiple times. If IO A/T channel is still active
* flag an error and return without cleanup. Memory leak is better
* than random corruption in that extreme error situation.
*/
- if (chan_sts == IOAT_CHANSTS_DMA_TRANSFER_STATUS_ACTIVE) {
+ if (chan_sts == IOAT_CHANSTS_ACTIVE) {
printk(KERN_ERR I7300_PRINT "Unable to stop IO A/T channels."
" Not freeing resources\n");
return;
return 0;
}
-static struct vm_operations_struct dma_region_vm_ops = {
+static const struct vm_operations_struct dma_region_vm_ops = {
.fault = dma_region_pagefault,
};
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/fs.h>
*/
#include <linux/kernel.h>
#include <linux/list.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
for_each_netdev(&init_net, dev)
if (ipv6_chk_addr(&init_net,
- &((struct sockaddr_in6 *) addr)->sin6_addr,
+ &((struct sockaddr_in6 *) dst_in)->sin6_addr,
dev, 1))
break;
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/rbtree.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/completion.h>
* In either case, must tell the provider to reject.
*/
cm_id_priv->state = IW_CM_STATE_DESTROYING;
+ spin_unlock_irqrestore(&cm_id_priv->lock, flags);
cm_id->device->iwcm->reject(cm_id, NULL, 0);
+ spin_lock_irqsave(&cm_id_priv->lock, flags);
break;
case IW_CM_STATE_CONN_SENT:
case IW_CM_STATE_DESTROYING:
enum rmpp_state {
RMPP_STATE_ACTIVE,
RMPP_STATE_TIMEOUT,
- RMPP_STATE_COMPLETE
+ RMPP_STATE_COMPLETE,
+ RMPP_STATE_CANCELING
};
struct mad_rmpp_recv {
unsigned long flags;
spin_lock_irqsave(&agent->lock, flags);
+ list_for_each_entry(rmpp_recv, &agent->rmpp_list, list) {
+ if (rmpp_recv->state != RMPP_STATE_COMPLETE)
+ ib_free_recv_mad(rmpp_recv->rmpp_wc);
+ rmpp_recv->state = RMPP_STATE_CANCELING;
+ }
+ spin_unlock_irqrestore(&agent->lock, flags);
+
list_for_each_entry(rmpp_recv, &agent->rmpp_list, list) {
cancel_delayed_work(&rmpp_recv->timeout_work);
cancel_delayed_work(&rmpp_recv->cleanup_work);
}
- spin_unlock_irqrestore(&agent->lock, flags);
flush_workqueue(agent->qp_info->port_priv->wq);
list_for_each_entry_safe(rmpp_recv, temp_rmpp_recv,
&agent->rmpp_list, list) {
list_del(&rmpp_recv->list);
- if (rmpp_recv->state != RMPP_STATE_COMPLETE)
- ib_free_recv_mad(rmpp_recv->rmpp_wc);
destroy_rmpp_recv(rmpp_recv);
}
}
unsigned long flags;
spin_lock_irqsave(&rmpp_recv->agent->lock, flags);
+ if (rmpp_recv->state == RMPP_STATE_CANCELING) {
+ spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags);
+ return;
+ }
list_del(&rmpp_recv->list);
spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags);
destroy_rmpp_recv(rmpp_recv);
#include <linux/device.h>
#include <linux/err.h>
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/file.h>
#include <linux/mount.h>
#include <linux/cdev.h>
#include <linux/file.h>
#include <linux/mutex.h>
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/idr.h>
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/mutex.h>
#include <linux/kref.h>
#include <linux/compat.h>
+#include <linux/sched.h>
#include <linux/semaphore.h>
#include <asm/uaccess.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/file.h>
#include <linux/mount.h>
#include <linux/cdev.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/list.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/ethtool.h>
#include <linux/rtnetlink.h>
props->state = IB_PORT_DOWN;
else {
inetdev = in_dev_get(netdev);
- if (inetdev->ifa_list)
- props->state = IB_PORT_ACTIVE;
- else
+ if (inetdev) {
+ if (inetdev->ifa_list)
+ props->state = IB_PORT_ACTIVE;
+ else
+ props->state = IB_PORT_INIT;
+ in_dev_put(inetdev);
+ } else
props->state = IB_PORT_INIT;
- in_dev_put(inetdev);
}
props->port_cap_flags =
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
+#include <linux/sched.h>
#include "iwch_provider.h"
#include "iwch.h"
#include "iwch_cm.h"
vma->vm_start, vma->vm_end, *count);
}
-static struct vm_operations_struct vm_ops = {
+static const struct vm_operations_struct vm_ops = {
.open = ehca_mm_open,
.close = ehca_mm_close,
};
* SOFTWARE.
*/
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/idr.h>
#include <linux/pci.h>
return 0;
}
-static struct vm_operations_struct ipath_file_vm_ops = {
+static const struct vm_operations_struct ipath_file_vm_ops = {
.fault = ipath_file_vma_fault,
};
#include <linux/interrupt.h>
#include <linux/pci.h>
+#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <rdma/ib_verbs.h>
#include <linux/pci.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include "ipath_kernel.h"
#include "ipath_verbs.h"
kref_put(&ip->ref, ipath_release_mmap_info);
}
-static struct vm_operations_struct ipath_vm_ops = {
+static const struct vm_operations_struct ipath_vm_ops = {
.open = ipath_vma_open,
.close = ipath_vma_close,
};
*/
#include <linux/err.h>
+#include <linux/sched.h>
#include <linux/vmalloc.h>
#include "ipath_verbs.h"
* SOFTWARE.
*/
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include "ipath_verbs.h"
* SOFTWARE.
*/
+#include <linux/sched.h>
#include <rdma/ib_smi.h>
#include "ipath_verbs.h"
#include <linux/mm.h>
#include <linux/device.h>
+#include <linux/sched.h>
#include "ipath_kernel.h"
#include <linux/types.h>
#include <linux/device.h>
#include <linux/dmapool.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/highmem.h>
*/
#include <linux/rculist.h>
+#include <linux/sched.h>
#include "ipath_verbs.h"
spin_unlock_irq(&catas_lock);
list_for_each_entry_safe(dev, tmpdev, &tlist, catas_err.list) {
+ struct pci_dev *pdev = dev->pdev;
ret = __mthca_restart_one(dev->pdev);
+ /* 'dev' now is not valid */
if (ret)
- mthca_err(dev, "Reset failed (%d)\n", ret);
- else
- mthca_dbg(dev, "Reset succeeded\n");
+ printk(KERN_ERR "mthca %s: Reset failed (%d)\n",
+ pci_name(pdev), ret);
+ else {
+ struct mthca_dev *d = pci_get_drvdata(pdev);
+ mthca_dbg(d, "Reset succeeded\n");
+ }
}
mutex_unlock(&mthca_device_mutex);
.ndo_set_mac_address = nes_netdev_set_mac_address,
.ndo_set_multicast_list = nes_netdev_set_multicast_list,
.ndo_change_mtu = nes_netdev_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_vlan_rx_register = nes_netdev_vlan_rx_register,
};
{
struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
carrier_on_task);
+ struct ib_port_attr attr;
/*
* Take rtnl_lock to avoid racing with ipoib_stop() and
* turning the carrier back on while a device is being
* removed.
*/
+ if (ib_query_port(priv->ca, priv->port, &attr) ||
+ attr.state != IB_PORT_ACTIVE) {
+ ipoib_dbg(priv, "Keeping carrier off until IB port is active\n");
+ return;
+ }
+
rtnl_lock();
netif_carrier_on(priv->dev);
rtnl_unlock();
* because we preallocate so many resources
*/
cls_session = iscsi_session_setup(&iscsi_iser_transport, shost,
- ISCSI_DEF_XMIT_CMDS_MAX,
+ ISCSI_DEF_XMIT_CMDS_MAX, 0,
sizeof(struct iscsi_iser_task),
initial_cmdsn, 0);
if (!cls_session)
#define EVDEV_BUFFER_SIZE 64
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
*/
#include <linux/init.h>
+#include <linux/types.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/major.h>
#include <linux/proc_fs.h>
+#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/poll.h>
#include <linux/device.h>
* that there are no threads in the middle of input_open_device()
*/
mutex_lock(&dev->mutex);
- dev->going_away = 1;
+ dev->going_away = true;
mutex_unlock(&dev->mutex);
spin_lock_irq(&dev->event_lock);
return 0;
}
+union input_seq_state {
+ struct {
+ unsigned short pos;
+ bool mutex_acquired;
+ };
+ void *p;
+};
+
static void *input_devices_seq_start(struct seq_file *seq, loff_t *pos)
{
- if (mutex_lock_interruptible(&input_mutex))
- return NULL;
+ union input_seq_state *state = (union input_seq_state *)&seq->private;
+ int error;
+
+ /* We need to fit into seq->private pointer */
+ BUILD_BUG_ON(sizeof(union input_seq_state) != sizeof(seq->private));
+
+ error = mutex_lock_interruptible(&input_mutex);
+ if (error) {
+ state->mutex_acquired = false;
+ return ERR_PTR(error);
+ }
+
+ state->mutex_acquired = true;
return seq_list_start(&input_dev_list, *pos);
}
return seq_list_next(v, &input_dev_list, pos);
}
-static void input_devices_seq_stop(struct seq_file *seq, void *v)
+static void input_seq_stop(struct seq_file *seq, void *v)
{
- mutex_unlock(&input_mutex);
+ union input_seq_state *state = (union input_seq_state *)&seq->private;
+
+ if (state->mutex_acquired)
+ mutex_unlock(&input_mutex);
}
static void input_seq_print_bitmap(struct seq_file *seq, const char *name,
static const struct seq_operations input_devices_seq_ops = {
.start = input_devices_seq_start,
.next = input_devices_seq_next,
- .stop = input_devices_seq_stop,
+ .stop = input_seq_stop,
.show = input_devices_seq_show,
};
static void *input_handlers_seq_start(struct seq_file *seq, loff_t *pos)
{
- if (mutex_lock_interruptible(&input_mutex))
- return NULL;
+ union input_seq_state *state = (union input_seq_state *)&seq->private;
+ int error;
+
+ /* We need to fit into seq->private pointer */
+ BUILD_BUG_ON(sizeof(union input_seq_state) != sizeof(seq->private));
+
+ error = mutex_lock_interruptible(&input_mutex);
+ if (error) {
+ state->mutex_acquired = false;
+ return ERR_PTR(error);
+ }
+
+ state->mutex_acquired = true;
+ state->pos = *pos;
- seq->private = (void *)(unsigned long)*pos;
return seq_list_start(&input_handler_list, *pos);
}
static void *input_handlers_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
- seq->private = (void *)(unsigned long)(*pos + 1);
- return seq_list_next(v, &input_handler_list, pos);
-}
+ union input_seq_state *state = (union input_seq_state *)&seq->private;
-static void input_handlers_seq_stop(struct seq_file *seq, void *v)
-{
- mutex_unlock(&input_mutex);
+ state->pos = *pos + 1;
+ return seq_list_next(v, &input_handler_list, pos);
}
static int input_handlers_seq_show(struct seq_file *seq, void *v)
{
struct input_handler *handler = container_of(v, struct input_handler, node);
+ union input_seq_state *state = (union input_seq_state *)&seq->private;
- seq_printf(seq, "N: Number=%ld Name=%s",
- (unsigned long)seq->private, handler->name);
+ seq_printf(seq, "N: Number=%u Name=%s", state->pos, handler->name);
if (handler->fops)
seq_printf(seq, " Minor=%d", handler->minor);
seq_putc(seq, '\n');
return 0;
}
+
static const struct seq_operations input_handlers_seq_ops = {
.start = input_handlers_seq_start,
.next = input_handlers_seq_next,
- .stop = input_handlers_seq_stop,
+ .stop = input_seq_stop,
.show = input_handlers_seq_show,
};
return 0;
}
+#define INPUT_DO_TOGGLE(dev, type, bits, on) \
+ do { \
+ int i; \
+ if (!test_bit(EV_##type, dev->evbit)) \
+ break; \
+ for (i = 0; i < type##_MAX; i++) { \
+ if (!test_bit(i, dev->bits##bit) || \
+ !test_bit(i, dev->bits)) \
+ continue; \
+ dev->event(dev, EV_##type, i, on); \
+ } \
+ } while (0)
+
+#ifdef CONFIG_PM
+static void input_dev_reset(struct input_dev *dev, bool activate)
+{
+ if (!dev->event)
+ return;
+
+ INPUT_DO_TOGGLE(dev, LED, led, activate);
+ INPUT_DO_TOGGLE(dev, SND, snd, activate);
+
+ if (activate && test_bit(EV_REP, dev->evbit)) {
+ dev->event(dev, EV_REP, REP_PERIOD, dev->rep[REP_PERIOD]);
+ dev->event(dev, EV_REP, REP_DELAY, dev->rep[REP_DELAY]);
+ }
+}
+
+static int input_dev_suspend(struct device *dev)
+{
+ struct input_dev *input_dev = to_input_dev(dev);
+
+ mutex_lock(&input_dev->mutex);
+ input_dev_reset(input_dev, false);
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+
+static int input_dev_resume(struct device *dev)
+{
+ struct input_dev *input_dev = to_input_dev(dev);
+
+ mutex_lock(&input_dev->mutex);
+ input_dev_reset(input_dev, true);
+ mutex_unlock(&input_dev->mutex);
+
+ return 0;
+}
+
+static const struct dev_pm_ops input_dev_pm_ops = {
+ .suspend = input_dev_suspend,
+ .resume = input_dev_resume,
+ .poweroff = input_dev_suspend,
+ .restore = input_dev_resume,
+};
+#endif /* CONFIG_PM */
+
static struct device_type input_dev_type = {
.groups = input_dev_attr_groups,
.release = input_dev_release,
.uevent = input_dev_uevent,
+#ifdef CONFIG_PM
+ .pm = &input_dev_pm_ops,
+#endif
};
static char *input_devnode(struct device *dev, mode_t *mode)
#include <linux/input.h>
#include <linux/kernel.h>
#include <linux/major.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
{ 0x12ab, 0x8809, "Xbox DDR dancepad", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
{ 0x1430, 0x4748, "RedOctane Guitar Hero X-plorer", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x1430, 0x8888, "TX6500+ Dance Pad (first generation)", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX },
+ { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x045e, 0x028e, "Microsoft X-Box 360 pad", MAP_DPAD_TO_AXES, XTYPE_XBOX360 },
{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
{ 0xffff, 0xffff, "Chinese-made Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX },
XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */
XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */
+ XPAD_XBOX360_VENDOR(0x146b), /* BigBen Interactive Controllers */
XPAD_XBOX360_VENDOR(0x1bad), /* Rock Band Drums */
{ }
};
To compile this driver as a module, choose M here: the
module will be called aaed2000_kbd.
+config KEYBOARD_ADP5588
+ tristate "ADP5588 I2C QWERTY Keypad and IO Expander"
+ depends on I2C
+ help
+ Say Y here if you want to use a ADP5588 attached to your
+ system I2C bus.
+
+ To compile this driver as a module, choose M here: the
+ module will be called adp5588-keys.
+
config KEYBOARD_AMIGA
tristate "Amiga keyboard"
depends on AMIGA
right-hand column will be interpreted as the key shown in the
left-hand column.
+config QT2160
+ tristate "Atmel AT42QT2160 Touch Sensor Chip"
+ depends on I2C && EXPERIMENTAL
+ help
+ If you say yes here you get support for Atmel AT42QT2160 Touch
+ Sensor chip as a keyboard input.
+
+ This driver can also be built as a module. If so, the module
+ will be called qt2160.
+
config KEYBOARD_BFIN
tristate "Blackfin BF54x keypad support"
depends on (BF54x && !BF544)
To compile this driver as a module, choose M here: the
module will be called maple_keyb.
+config KEYBOARD_MAX7359
+ tristate "Maxim MAX7359 Key Switch Controller"
+ depends on I2C
+ help
+ If you say yes here you get support for the Maxim MAX7359 Key
+ Switch Controller chip. This providers microprocessors with
+ management of up to 64 key switches
+
+ To compile this driver as a module, choose M here: the
+ module will be called max7359_keypad.
+
config KEYBOARD_NEWTON
tristate "Newton keyboard"
select SERIO
To compile this driver as a module, choose M here: the
module will be called newtonkbd.
+config KEYBOARD_OPENCORES
+ tristate "OpenCores Keyboard Controller"
+ help
+ Say Y here if you want to use the OpenCores Keyboard Controller
+ http://www.opencores.org/project,keyboardcontroller
+
+ To compile this driver as a module, choose M here; the
+ module will be called opencores-kbd.
+
config KEYBOARD_PXA27x
tristate "PXA27x/PXA3xx keypad support"
depends on PXA27x || PXA3xx
# Each configuration option enables a list of files.
obj-$(CONFIG_KEYBOARD_AAED2000) += aaed2000_kbd.o
+obj-$(CONFIG_KEYBOARD_ADP5588) += adp5588-keys.o
obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o
obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o
obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
+obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o
obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o
obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o
+obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
obj-$(CONFIG_KEYBOARD_SPITZ) += spitzkbd.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
--- /dev/null
+/*
+ * File: drivers/input/keyboard/adp5588_keys.c
+ * Description: keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2008-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+
+#include <linux/i2c/adp5588.h>
+
+ /* Configuration Register1 */
+#define AUTO_INC (1 << 7)
+#define GPIEM_CFG (1 << 6)
+#define OVR_FLOW_M (1 << 5)
+#define INT_CFG (1 << 4)
+#define OVR_FLOW_IEN (1 << 3)
+#define K_LCK_IM (1 << 2)
+#define GPI_IEN (1 << 1)
+#define KE_IEN (1 << 0)
+
+/* Interrupt Status Register */
+#define CMP2_INT (1 << 5)
+#define CMP1_INT (1 << 4)
+#define OVR_FLOW_INT (1 << 3)
+#define K_LCK_INT (1 << 2)
+#define GPI_INT (1 << 1)
+#define KE_INT (1 << 0)
+
+/* Key Lock and Event Counter Register */
+#define K_LCK_EN (1 << 6)
+#define LCK21 0x30
+#define KEC 0xF
+
+/* Key Event Register xy */
+#define KEY_EV_PRESSED (1 << 7)
+#define KEY_EV_MASK (0x7F)
+
+#define KP_SEL(x) (0xFFFF >> (16 - x)) /* 2^x-1 */
+
+#define KEYP_MAX_EVENT 10
+
+/*
+ * Early pre 4.0 Silicon required to delay readout by at least 25ms,
+ * since the Event Counter Register updated 25ms after the interrupt
+ * asserted.
+ */
+#define WA_DELAYED_READOUT_REVID(rev) ((rev) < 4)
+
+struct adp5588_kpad {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct delayed_work work;
+ unsigned long delay;
+ unsigned short keycode[ADP5588_KEYMAPSIZE];
+};
+
+static int adp5588_read(struct i2c_client *client, u8 reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "Read Error\n");
+
+ return ret;
+}
+
+static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
+{
+ return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static void adp5588_work(struct work_struct *work)
+{
+ struct adp5588_kpad *kpad = container_of(work,
+ struct adp5588_kpad, work.work);
+ struct i2c_client *client = kpad->client;
+ int i, key, status, ev_cnt;
+
+ status = adp5588_read(client, INT_STAT);
+
+ if (status & OVR_FLOW_INT) /* Unlikely and should never happen */
+ dev_err(&client->dev, "Event Overflow Error\n");
+
+ if (status & KE_INT) {
+ ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
+ if (ev_cnt) {
+ for (i = 0; i < ev_cnt; i++) {
+ key = adp5588_read(client, Key_EVENTA + i);
+ input_report_key(kpad->input,
+ kpad->keycode[(key & KEY_EV_MASK) - 1],
+ key & KEY_EV_PRESSED);
+ }
+ input_sync(kpad->input);
+ }
+ }
+ adp5588_write(client, INT_STAT, status); /* Status is W1C */
+}
+
+static irqreturn_t adp5588_irq(int irq, void *handle)
+{
+ struct adp5588_kpad *kpad = handle;
+
+ /*
+ * use keventd context to read the event fifo registers
+ * Schedule readout at least 25ms after notification for
+ * REVID < 4
+ */
+
+ schedule_delayed_work(&kpad->work, kpad->delay);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit adp5588_setup(struct i2c_client *client)
+{
+ struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+ int i, ret;
+
+ ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
+ ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
+ ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
+
+ if (pdata->en_keylock) {
+ ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
+ ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
+ ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
+ }
+
+ for (i = 0; i < KEYP_MAX_EVENT; i++)
+ ret |= adp5588_read(client, Key_EVENTA);
+
+ ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
+ OVR_FLOW_INT | K_LCK_INT |
+ GPI_INT | KE_INT); /* Status is W1C */
+
+ ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
+
+ if (ret < 0) {
+ dev_err(&client->dev, "Write Error\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit adp5588_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct adp5588_kpad *kpad;
+ struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+ struct input_dev *input;
+ unsigned int revid;
+ int ret, i;
+ int error;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+ return -EIO;
+ }
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data?\n");
+ return -EINVAL;
+ }
+
+ if (!pdata->rows || !pdata->cols || !pdata->keymap) {
+ dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
+ return -EINVAL;
+ }
+
+ if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
+ dev_err(&client->dev, "invalid keymapsize\n");
+ return -EINVAL;
+ }
+
+ if (!client->irq) {
+ dev_err(&client->dev, "no IRQ?\n");
+ return -EINVAL;
+ }
+
+ kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!kpad || !input) {
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ kpad->client = client;
+ kpad->input = input;
+ INIT_DELAYED_WORK(&kpad->work, adp5588_work);
+
+ ret = adp5588_read(client, DEV_ID);
+ if (ret < 0) {
+ error = ret;
+ goto err_free_mem;
+ }
+
+ revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
+ if (WA_DELAYED_READOUT_REVID(revid))
+ kpad->delay = msecs_to_jiffies(30);
+
+ input->name = client->name;
+ input->phys = "adp5588-keys/input0";
+ input->dev.parent = &client->dev;
+
+ input_set_drvdata(input, kpad);
+
+ input->id.bustype = BUS_I2C;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = revid;
+
+ input->keycodesize = sizeof(kpad->keycode[0]);
+ input->keycodemax = pdata->keymapsize;
+ input->keycode = kpad->keycode;
+
+ memcpy(kpad->keycode, pdata->keymap,
+ pdata->keymapsize * input->keycodesize);
+
+ /* setup input device */
+ __set_bit(EV_KEY, input->evbit);
+
+ if (pdata->repeat)
+ __set_bit(EV_REP, input->evbit);
+
+ for (i = 0; i < input->keycodemax; i++)
+ __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&client->dev, "unable to register input device\n");
+ goto err_free_mem;
+ }
+
+ error = request_irq(client->irq, adp5588_irq,
+ IRQF_TRIGGER_FALLING | IRQF_DISABLED,
+ client->dev.driver->name, kpad);
+ if (error) {
+ dev_err(&client->dev, "irq %d busy?\n", client->irq);
+ goto err_unreg_dev;
+ }
+
+ error = adp5588_setup(client);
+ if (error)
+ goto err_free_irq;
+
+ device_init_wakeup(&client->dev, 1);
+ i2c_set_clientdata(client, kpad);
+
+ dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
+ return 0;
+
+ err_free_irq:
+ free_irq(client->irq, kpad);
+ err_unreg_dev:
+ input_unregister_device(input);
+ input = NULL;
+ err_free_mem:
+ input_free_device(input);
+ kfree(kpad);
+
+ return error;
+}
+
+static int __devexit adp5588_remove(struct i2c_client *client)
+{
+ struct adp5588_kpad *kpad = i2c_get_clientdata(client);
+
+ adp5588_write(client, CFG, 0);
+ free_irq(client->irq, kpad);
+ cancel_delayed_work_sync(&kpad->work);
+ input_unregister_device(kpad->input);
+ i2c_set_clientdata(client, NULL);
+ kfree(kpad);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp5588_suspend(struct device *dev)
+{
+ struct adp5588_kpad *kpad = dev_get_drvdata(dev);
+ struct i2c_client *client = kpad->client;
+
+ disable_irq(client->irq);
+ cancel_delayed_work_sync(&kpad->work);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static int adp5588_resume(struct device *dev)
+{
+ struct adp5588_kpad *kpad = dev_get_drvdata(dev);
+ struct i2c_client *client = kpad->client;
+
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(client->irq);
+
+ enable_irq(client->irq);
+
+ return 0;
+}
+
+static struct dev_pm_ops adp5588_dev_pm_ops = {
+ .suspend = adp5588_suspend,
+ .resume = adp5588_resume,
+};
+#endif
+
+static const struct i2c_device_id adp5588_id[] = {
+ { KBUILD_MODNAME, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp5588_id);
+
+static struct i2c_driver adp5588_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+#ifdef CONFIG_PM
+ .pm = &adp5588_dev_pm_ops,
+#endif
+ },
+ .probe = adp5588_probe,
+ .remove = __devexit_p(adp5588_remove),
+ .id_table = adp5588_id,
+};
+
+static int __init adp5588_init(void)
+{
+ return i2c_add_driver(&adp5588_driver);
+}
+module_init(adp5588_init);
+
+static void __exit adp5588_exit(void)
+{
+ i2c_del_driver(&adp5588_driver);
+}
+module_exit(adp5588_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5588 Keypad driver");
+MODULE_ALIAS("platform:adp5588-keys");
*/
static void (*atkbd_platform_fixup)(struct atkbd *, const void *data);
static void *atkbd_platform_fixup_data;
+static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int);
static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf,
ssize_t (*handler)(struct atkbd *, char *));
input_event(dev, EV_MSC, MSC_RAW, code);
+ if (atkbd_platform_scancode_fixup)
+ code = atkbd_platform_scancode_fixup(atkbd, code);
+
if (atkbd->translated) {
if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) {
mutex_lock(&atkbd->event_mutex);
- if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
- atkbd_set_leds(atkbd);
+ if (!atkbd->enabled) {
+ /*
+ * Serio ports are resumed asynchronously so while driver core
+ * thinks that device is already fully operational in reality
+ * it may not be ready yet. In this case we need to keep
+ * rescheduling till reconnect completes.
+ */
+ schedule_delayed_work(&atkbd->event_work,
+ msecs_to_jiffies(100));
+ } else {
+ if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask))
+ atkbd_set_leds(atkbd);
- if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
- atkbd_set_repeat_rate(atkbd);
+ if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask))
+ atkbd_set_repeat_rate(atkbd);
+ }
mutex_unlock(&atkbd->event_mutex);
}
return 3;
}
-static int atkbd_activate(struct atkbd *atkbd)
+static int atkbd_reset_state(struct atkbd *atkbd)
{
- struct ps2dev *ps2dev = &atkbd->ps2dev;
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
unsigned char param[1];
/*
- * Set the LEDs to a defined state.
+ * Set the LEDs to a predefined state (all off).
*/
param[0] = 0;
if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
return -1;
+ return 0;
+}
+
+static int atkbd_activate(struct atkbd *atkbd)
+{
+ struct ps2dev *ps2dev = &atkbd->ps2dev;
+
/*
* Enable the keyboard to receive keystrokes.
*/
0x94, -1U
};
-/*
- * Inventec system with broken key release on volume keys
- */
-static unsigned int atkbd_inventec_forced_release_keys[] = {
- 0xae, 0xb0, -1U
-};
-
-/*
- * Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release
- * for its volume buttons
- */
-static unsigned int atkbd_hp_zv6100_forced_release_keys[] = {
- 0xae, 0xb0, -1U
-};
-
-/*
- * Perform fixup for HP (Compaq) Presario R4000 R4100 R4200 that don't generate
- * release for their volume buttons
- */
-static unsigned int atkbd_hp_r4000_forced_release_keys[] = {
- 0xae, 0xb0, -1U
-};
-
/*
* Samsung NC10,NC20 with Fn+F? key release not working
*/
0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
};
-/*
- * The volume up and volume down special keys on a Fujitsu Amilo PA 1510 laptop
- * do not generate release events so we have to do it ourselves.
- */
-static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
- 0xb0, 0xae, -1U
-};
-
/*
* Amilo Pi 3525 key release for Fn+Volume keys not working
*/
0xa0, 0xae, 0xb0, -1U
};
+/*
+ * Many notebooks don't send key release event for volume up/down
+ * keys, with key list below common among them
+ */
+static unsigned int atkbd_volume_forced_release_keys[] = {
+ 0xae, 0xb0, -1U
+};
+
+/*
+ * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas
+ * they should be generating e4-e6 (0x80 | code).
+ */
+static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd,
+ unsigned int code)
+{
+ if (atkbd->translated && atkbd->emul == 1 &&
+ (code == 0x64 || code == 0x65 || code == 0x66)) {
+ atkbd->emul = 0;
+ code |= 0x80;
+ }
+
+ return code;
+}
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
}
atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra);
+ atkbd_reset_state(atkbd);
atkbd_activate(atkbd);
} else {
return -1;
atkbd_activate(atkbd);
-
-/*
- * Restore repeat rate and LEDs (that were reset by atkbd_activate)
- * to pre-resume state
- */
- if (!atkbd->softrepeat)
- atkbd_set_repeat_rate(atkbd);
- atkbd_set_leds(atkbd);
}
atkbd_enable(atkbd);
atkbd->dev = new_dev;
atkbd->set = atkbd_select_set(atkbd, atkbd->set, value);
+ atkbd_reset_state(atkbd);
atkbd_activate(atkbd);
atkbd_set_keycode_table(atkbd);
atkbd_set_device_attrs(atkbd);
return 0;
}
+static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id)
+{
+ atkbd_platform_scancode_fixup = id->driver_data;
+
+ return 0;
+}
+
static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
{
.ident = "Dell Laptop",
DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"),
},
.callback = atkbd_setup_forced_release,
- .driver_data = atkbd_hp_zv6100_forced_release_keys,
+ .driver_data = atkbd_volume_forced_release_keys,
},
{
.ident = "HP Presario R4000",
DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"),
},
.callback = atkbd_setup_forced_release,
- .driver_data = atkbd_hp_r4000_forced_release_keys,
+ .driver_data = atkbd_volume_forced_release_keys,
},
{
.ident = "HP Presario R4100",
DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"),
},
.callback = atkbd_setup_forced_release,
- .driver_data = atkbd_hp_r4000_forced_release_keys,
+ .driver_data = atkbd_volume_forced_release_keys,
},
{
.ident = "HP Presario R4200",
DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"),
},
.callback = atkbd_setup_forced_release,
- .driver_data = atkbd_hp_r4000_forced_release_keys,
+ .driver_data = atkbd_volume_forced_release_keys,
},
{
.ident = "Inventec Symphony",
DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"),
},
.callback = atkbd_setup_forced_release,
- .driver_data = atkbd_inventec_forced_release_keys,
+ .driver_data = atkbd_volume_forced_release_keys,
},
{
.ident = "Samsung NC10",
DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"),
},
.callback = atkbd_setup_forced_release,
- .driver_data = atkbd_amilo_pa1510_forced_release_keys,
+ .driver_data = atkbd_volume_forced_release_keys,
},
{
.ident = "Fujitsu Amilo Pi 3525",
.callback = atkbd_setup_forced_release,
.driver_data = atkdb_soltech_ta12_forced_release_keys,
},
+ {
+ .ident = "OQO Model 01+",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "OQO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"),
+ },
+ .callback = atkbd_setup_scancode_fixup,
+ .driver_data = atkbd_oqo_01plus_scancode_fixup,
+ },
{ }
};
}
error = request_irq(irq, gpio_keys_isr,
+ IRQF_SHARED |
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
button->desc ? button->desc : "gpio_keys",
bdata);
#include <linux/interrupt.h>
#include <linux/hil.h>
#include <linux/io.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <asm/irq.h>
#ifdef CONFIG_HP300
--- /dev/null
+/*
+ * max7359_keypad.c - MAX7359 Key Switch Controller Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * Based on pxa27x_keypad.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+
+#define MAX7359_MAX_KEY_ROWS 8
+#define MAX7359_MAX_KEY_COLS 8
+#define MAX7359_MAX_KEY_NUM (MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS)
+#define MAX7359_ROW_SHIFT 3
+
+/*
+ * MAX7359 registers
+ */
+#define MAX7359_REG_KEYFIFO 0x00
+#define MAX7359_REG_CONFIG 0x01
+#define MAX7359_REG_DEBOUNCE 0x02
+#define MAX7359_REG_INTERRUPT 0x03
+#define MAX7359_REG_PORTS 0x04
+#define MAX7359_REG_KEYREP 0x05
+#define MAX7359_REG_SLEEP 0x06
+
+/*
+ * Configuration register bits
+ */
+#define MAX7359_CFG_SLEEP (1 << 7)
+#define MAX7359_CFG_INTERRUPT (1 << 5)
+#define MAX7359_CFG_KEY_RELEASE (1 << 3)
+#define MAX7359_CFG_WAKEUP (1 << 1)
+#define MAX7359_CFG_TIMEOUT (1 << 0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7359_AUTOSLEEP_8192 0x01
+#define MAX7359_AUTOSLEEP_4096 0x02
+#define MAX7359_AUTOSLEEP_2048 0x03
+#define MAX7359_AUTOSLEEP_1024 0x04
+#define MAX7359_AUTOSLEEP_512 0x05
+#define MAX7359_AUTOSLEEP_256 0x06
+
+struct max7359_keypad {
+ /* matrix key code map */
+ unsigned short keycodes[MAX7359_MAX_KEY_NUM];
+
+ struct input_dev *input_dev;
+ struct i2c_client *client;
+};
+
+static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+ __func__, reg, val, ret);
+ return ret;
+}
+
+static int max7359_read_reg(struct i2c_client *client, int reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
+ __func__, reg, ret);
+ return ret;
+}
+
+static void max7359_build_keycode(struct max7359_keypad *keypad,
+ const struct matrix_keymap_data *keymap_data)
+{
+ struct input_dev *input_dev = keypad->input_dev;
+ int i;
+
+ for (i = 0; i < keymap_data->keymap_size; i++) {
+ unsigned int key = keymap_data->keymap[i];
+ unsigned int row = KEY_ROW(key);
+ unsigned int col = KEY_COL(key);
+ unsigned int scancode = MATRIX_SCAN_CODE(row, col,
+ MAX7359_ROW_SHIFT);
+ unsigned short keycode = KEY_VAL(key);
+
+ keypad->keycodes[scancode] = keycode;
+ __set_bit(keycode, input_dev->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input_dev->keybit);
+}
+
+/* runs in an IRQ thread -- can (and will!) sleep */
+static irqreturn_t max7359_interrupt(int irq, void *dev_id)
+{
+ struct max7359_keypad *keypad = dev_id;
+ struct input_dev *input_dev = keypad->input_dev;
+ int val, row, col, release, code;
+
+ val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO);
+ row = val & 0x7;
+ col = (val >> 3) & 0x7;
+ release = val & 0x40;
+
+ code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT);
+
+ dev_dbg(&keypad->client->dev,
+ "key[%d:%d] %s\n", row, col, release ? "release" : "press");
+
+ input_event(input_dev, EV_MSC, MSC_SCAN, code);
+ input_report_key(input_dev, keypad->keycodes[code], !release);
+ input_sync(input_dev);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Let MAX7359 fall into a deep sleep:
+ * If no keys are pressed, enter sleep mode for 8192 ms. And if any
+ * key is pressed, the MAX7359 returns to normal operating mode.
+ */
+static inline void max7359_fall_deepsleep(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192);
+}
+
+/*
+ * Let MAX7359 take a catnap:
+ * Autosleep just for 256 ms.
+ */
+static inline void max7359_take_catnap(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256);
+}
+
+static int max7359_open(struct input_dev *dev)
+{
+ struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+ max7359_take_catnap(keypad->client);
+
+ return 0;
+}
+
+static void max7359_close(struct input_dev *dev)
+{
+ struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+ max7359_fall_deepsleep(keypad->client);
+}
+
+static void max7359_initialize(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_CONFIG,
+ MAX7359_CFG_INTERRUPT | /* Irq clears after host read */
+ MAX7359_CFG_KEY_RELEASE | /* Key release enable */
+ MAX7359_CFG_WAKEUP); /* Key press wakeup enable */
+
+ /* Full key-scan functionality */
+ max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F);
+
+ /* nINT asserts every debounce cycles */
+ max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01);
+
+ max7359_fall_deepsleep(client);
+}
+
+static int __devinit max7359_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct matrix_keymap_data *keymap_data = client->dev.platform_data;
+ struct max7359_keypad *keypad;
+ struct input_dev *input_dev;
+ int ret;
+ int error;
+
+ if (!client->irq) {
+ dev_err(&client->dev, "The irq number should not be zero\n");
+ return -EINVAL;
+ }
+
+ /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */
+ ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to detect device\n");
+ return -ENODEV;
+ }
+
+ dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret);
+
+ keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!keypad || !input_dev) {
+ dev_err(&client->dev, "failed to allocate memory\n");
+ error = -ENOMEM;
+ goto failed_free_mem;
+ }
+
+ keypad->client = client;
+ keypad->input_dev = input_dev;
+
+ input_dev->name = client->name;
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = max7359_open;
+ input_dev->close = max7359_close;
+ input_dev->dev.parent = &client->dev;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+ input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+ input_dev->keycode = keypad->keycodes;
+
+ input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+ input_set_drvdata(input_dev, keypad);
+
+ max7359_build_keycode(keypad, keymap_data);
+
+ error = request_threaded_irq(client->irq, NULL, max7359_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ client->name, keypad);
+ if (error) {
+ dev_err(&client->dev, "failed to register interrupt\n");
+ goto failed_free_mem;
+ }
+
+ /* Register the input device */
+ error = input_register_device(input_dev);
+ if (error) {
+ dev_err(&client->dev, "failed to register input device\n");
+ goto failed_free_irq;
+ }
+
+ /* Initialize MAX7359 */
+ max7359_initialize(client);
+
+ i2c_set_clientdata(client, keypad);
+ device_init_wakeup(&client->dev, 1);
+
+ return 0;
+
+failed_free_irq:
+ free_irq(client->irq, keypad);
+failed_free_mem:
+ input_free_device(input_dev);
+ kfree(keypad);
+ return error;
+}
+
+static int __devexit max7359_remove(struct i2c_client *client)
+{
+ struct max7359_keypad *keypad = i2c_get_clientdata(client);
+
+ free_irq(client->irq, keypad);
+ input_unregister_device(keypad->input_dev);
+ i2c_set_clientdata(client, NULL);
+ kfree(keypad);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int max7359_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ max7359_fall_deepsleep(client);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static int max7359_resume(struct i2c_client *client)
+{
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(client->irq);
+
+ /* Restore the default setting */
+ max7359_take_catnap(client);
+
+ return 0;
+}
+#else
+#define max7359_suspend NULL
+#define max7359_resume NULL
+#endif
+
+static const struct i2c_device_id max7359_ids[] = {
+ { "max7359", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max7359_ids);
+
+static struct i2c_driver max7359_i2c_driver = {
+ .driver = {
+ .name = "max7359",
+ },
+ .probe = max7359_probe,
+ .remove = __devexit_p(max7359_remove),
+ .suspend = max7359_suspend,
+ .resume = max7359_resume,
+ .id_table = max7359_ids,
+};
+
+static int __init max7359_init(void)
+{
+ return i2c_add_driver(&max7359_i2c_driver);
+}
+module_init(max7359_init);
+
+static void __exit max7359_exit(void)
+{
+ i2c_del_driver(&max7359_i2c_driver);
+}
+module_exit(max7359_exit);
+
+MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
+MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * OpenCores Keyboard Controller Driver
+ * http://www.opencores.org/project,keyboardcontroller
+ *
+ * Copyright 2007-2009 HV Sistemas S.L.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+struct opencores_kbd {
+ struct input_dev *input;
+ struct resource *addr_res;
+ void __iomem *addr;
+ int irq;
+ unsigned short keycodes[128];
+};
+
+static irqreturn_t opencores_kbd_isr(int irq, void *dev_id)
+{
+ struct opencores_kbd *opencores_kbd = dev_id;
+ struct input_dev *input = opencores_kbd->input;
+ unsigned char c;
+
+ c = readb(opencores_kbd->addr);
+ input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1);
+ input_sync(input);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit opencores_kbd_probe(struct platform_device *pdev)
+{
+ struct input_dev *input;
+ struct opencores_kbd *opencores_kbd;
+ struct resource *res;
+ int irq, i, error;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "missing board memory resource\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "missing board IRQ resource\n");
+ return -EINVAL;
+ }
+
+ opencores_kbd = kzalloc(sizeof(*opencores_kbd), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!opencores_kbd || !input) {
+ dev_err(&pdev->dev, "failed to allocate device structures\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ opencores_kbd->addr_res = res;
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ error = -EBUSY;
+ goto err_free_mem;
+ }
+
+ opencores_kbd->addr = ioremap(res->start, resource_size(res));
+ if (!opencores_kbd->addr) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -ENXIO;
+ goto err_rel_mem;
+ }
+
+ opencores_kbd->input = input;
+ opencores_kbd->irq = irq;
+
+ input->name = pdev->name;
+ input->phys = "opencores-kbd/input0";
+ input->dev.parent = &pdev->dev;
+
+ input_set_drvdata(input, opencores_kbd);
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ input->keycode = opencores_kbd->keycodes;
+ input->keycodesize = sizeof(opencores_kbd->keycodes[0]);
+ input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes);
+
+ __set_bit(EV_KEY, input->evbit);
+
+ for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) {
+ /*
+ * OpenCores controller happens to have scancodes match
+ * our KEY_* definitions.
+ */
+ opencores_kbd->keycodes[i] = i;
+ __set_bit(opencores_kbd->keycodes[i], input->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ error = request_irq(irq, &opencores_kbd_isr,
+ IRQF_TRIGGER_RISING, pdev->name, opencores_kbd);
+ if (error) {
+ dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
+ goto err_unmap_mem;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev, "unable to register input device\n");
+ goto err_free_irq;
+ }
+
+ platform_set_drvdata(pdev, opencores_kbd);
+
+ return 0;
+
+ err_free_irq:
+ free_irq(irq, opencores_kbd);
+ err_unmap_mem:
+ iounmap(opencores_kbd->addr);
+ err_rel_mem:
+ release_mem_region(res->start, resource_size(res));
+ err_free_mem:
+ input_free_device(input);
+ kfree(opencores_kbd);
+
+ return error;
+}
+
+static int __devexit opencores_kbd_remove(struct platform_device *pdev)
+{
+ struct opencores_kbd *opencores_kbd = platform_get_drvdata(pdev);
+
+ free_irq(opencores_kbd->irq, opencores_kbd);
+
+ iounmap(opencores_kbd->addr);
+ release_mem_region(opencores_kbd->addr_res->start,
+ resource_size(opencores_kbd->addr_res));
+ input_unregister_device(opencores_kbd->input);
+ kfree(opencores_kbd);
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver opencores_kbd_device_driver = {
+ .probe = opencores_kbd_probe,
+ .remove = __devexit_p(opencores_kbd_remove),
+ .driver = {
+ .name = "opencores-kbd",
+ },
+};
+
+static int __init opencores_kbd_init(void)
+{
+ return platform_driver_register(&opencores_kbd_device_driver);
+}
+module_init(opencores_kbd_init);
+
+static void __exit opencores_kbd_exit(void)
+{
+ platform_driver_unregister(&opencores_kbd_device_driver);
+}
+module_exit(opencores_kbd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>");
+MODULE_DESCRIPTION("Keyboard driver for OpenCores Keyboard Controller");
--- /dev/null
+/*
+ * qt2160.c - Atmel AT42QT2160 Touch Sense Controller
+ *
+ * Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+
+#define QT2160_VALID_CHIPID 0x11
+
+#define QT2160_CMD_CHIPID 0
+#define QT2160_CMD_CODEVER 1
+#define QT2160_CMD_GSTAT 2
+#define QT2160_CMD_KEYS3 3
+#define QT2160_CMD_KEYS4 4
+#define QT2160_CMD_SLIDE 5
+#define QT2160_CMD_GPIOS 6
+#define QT2160_CMD_SUBVER 7
+#define QT2160_CMD_CALIBRATE 10
+
+#define QT2160_CYCLE_INTERVAL (2*HZ)
+
+static unsigned char qt2160_key2code[] = {
+ KEY_0, KEY_1, KEY_2, KEY_3,
+ KEY_4, KEY_5, KEY_6, KEY_7,
+ KEY_8, KEY_9, KEY_A, KEY_B,
+ KEY_C, KEY_D, KEY_E, KEY_F,
+};
+
+struct qt2160_data {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct delayed_work dwork;
+ spinlock_t lock; /* Protects canceling/rescheduling of dwork */
+ unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
+ u16 key_matrix;
+};
+
+static int qt2160_read_block(struct i2c_client *client,
+ u8 inireg, u8 *buffer, unsigned int count)
+{
+ int error, idx = 0;
+
+ /*
+ * Can't use SMBus block data read. Check for I2C functionality to speed
+ * things up whenever possible. Otherwise we will be forced to read
+ * sequentially.
+ */
+ if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+
+ error = i2c_smbus_write_byte(client, inireg + idx);
+ if (error) {
+ dev_err(&client->dev,
+ "couldn't send request. Returned %d\n", error);
+ return error;
+ }
+
+ error = i2c_master_recv(client, buffer, count);
+ if (error != count) {
+ dev_err(&client->dev,
+ "couldn't read registers. Returned %d bytes\n", error);
+ return error;
+ }
+ } else {
+
+ while (count--) {
+ int data;
+
+ error = i2c_smbus_write_byte(client, inireg + idx);
+ if (error) {
+ dev_err(&client->dev,
+ "couldn't send request. Returned %d\n", error);
+ return error;
+ }
+
+ data = i2c_smbus_read_byte(client);
+ if (data < 0) {
+ dev_err(&client->dev,
+ "couldn't read register. Returned %d\n", data);
+ return data;
+ }
+
+ buffer[idx++] = data;
+ }
+ }
+
+ return 0;
+}
+
+static int qt2160_get_key_matrix(struct qt2160_data *qt2160)
+{
+ struct i2c_client *client = qt2160->client;
+ struct input_dev *input = qt2160->input;
+ u8 regs[6];
+ u16 old_matrix, new_matrix;
+ int ret, i, mask;
+
+ dev_dbg(&client->dev, "requesting keys...\n");
+
+ /*
+ * Read all registers from General Status Register
+ * to GPIOs register
+ */
+ ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6);
+ if (ret) {
+ dev_err(&client->dev,
+ "could not perform chip read.\n");
+ return ret;
+ }
+
+ old_matrix = qt2160->key_matrix;
+ qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1];
+
+ mask = 0x01;
+ for (i = 0; i < 16; ++i, mask <<= 1) {
+ int keyval = new_matrix & mask;
+
+ if ((old_matrix & mask) != keyval) {
+ input_report_key(input, qt2160->keycodes[i], keyval);
+ dev_dbg(&client->dev, "key %d %s\n",
+ i, keyval ? "pressed" : "released");
+ }
+ }
+
+ input_sync(input);
+
+ return 0;
+}
+
+static irqreturn_t qt2160_irq(int irq, void *_qt2160)
+{
+ struct qt2160_data *qt2160 = _qt2160;
+ unsigned long flags;
+
+ spin_lock_irqsave(&qt2160->lock, flags);
+
+ __cancel_delayed_work(&qt2160->dwork);
+ schedule_delayed_work(&qt2160->dwork, 0);
+
+ spin_unlock_irqrestore(&qt2160->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void qt2160_schedule_read(struct qt2160_data *qt2160)
+{
+ spin_lock_irq(&qt2160->lock);
+ schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL);
+ spin_unlock_irq(&qt2160->lock);
+}
+
+static void qt2160_worker(struct work_struct *work)
+{
+ struct qt2160_data *qt2160 =
+ container_of(work, struct qt2160_data, dwork.work);
+
+ dev_dbg(&qt2160->client->dev, "worker\n");
+
+ qt2160_get_key_matrix(qt2160);
+
+ /* Avoid device lock up by checking every so often */
+ qt2160_schedule_read(qt2160);
+}
+
+static int __devinit qt2160_read(struct i2c_client *client, u8 reg)
+{
+ int ret;
+
+ ret = i2c_smbus_write_byte(client, reg);
+ if (ret) {
+ dev_err(&client->dev,
+ "couldn't send request. Returned %d\n", ret);
+ return ret;
+ }
+
+ ret = i2c_smbus_read_byte(client);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "couldn't read register. Returned %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int __devinit qt2160_write(struct i2c_client *client, u8 reg, u8 data)
+{
+ int error;
+
+ error = i2c_smbus_write_byte(client, reg);
+ if (error) {
+ dev_err(&client->dev,
+ "couldn't send request. Returned %d\n", error);
+ return error;
+ }
+
+ error = i2c_smbus_write_byte(client, data);
+ if (error) {
+ dev_err(&client->dev,
+ "couldn't write data. Returned %d\n", error);
+ return error;
+ }
+
+ return error;
+}
+
+
+static bool __devinit qt2160_identify(struct i2c_client *client)
+{
+ int id, ver, rev;
+
+ /* Read Chid ID to check if chip is valid */
+ id = qt2160_read(client, QT2160_CMD_CHIPID);
+ if (id != QT2160_VALID_CHIPID) {
+ dev_err(&client->dev, "ID %d not supported\n", id);
+ return false;
+ }
+
+ /* Read chip firmware version */
+ ver = qt2160_read(client, QT2160_CMD_CODEVER);
+ if (ver < 0) {
+ dev_err(&client->dev, "could not get firmware version\n");
+ return false;
+ }
+
+ /* Read chip firmware revision */
+ rev = qt2160_read(client, QT2160_CMD_SUBVER);
+ if (rev < 0) {
+ dev_err(&client->dev, "could not get firmware revision\n");
+ return false;
+ }
+
+ dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n",
+ ver >> 4, ver & 0xf, rev);
+
+ return true;
+}
+
+static int __devinit qt2160_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct qt2160_data *qt2160;
+ struct input_dev *input;
+ int i;
+ int error;
+
+ /* Check functionality */
+ error = i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE);
+ if (!error) {
+ dev_err(&client->dev, "%s adapter not supported\n",
+ dev_driver_string(&client->adapter->dev));
+ return -ENODEV;
+ }
+
+ if (!qt2160_identify(client))
+ return -ENODEV;
+
+ /* Chip is valid and active. Allocate structure */
+ qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!qt2160 || !input) {
+ dev_err(&client->dev, "insufficient memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ qt2160->client = client;
+ qt2160->input = input;
+ INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
+ spin_lock_init(&qt2160->lock);
+
+ input->name = "AT42QT2160 Touch Sense Keyboard";
+ input->id.bustype = BUS_I2C;
+
+ input->keycode = qt2160->keycodes;
+ input->keycodesize = sizeof(qt2160->keycodes[0]);
+ input->keycodemax = ARRAY_SIZE(qt2160_key2code);
+
+ __set_bit(EV_KEY, input->evbit);
+ __clear_bit(EV_REP, input->evbit);
+ for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) {
+ qt2160->keycodes[i] = qt2160_key2code[i];
+ __set_bit(qt2160_key2code[i], input->keybit);
+ }
+ __clear_bit(KEY_RESERVED, input->keybit);
+
+ /* Calibrate device */
+ error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
+ if (error) {
+ dev_err(&client->dev, "failed to calibrate device\n");
+ goto err_free_mem;
+ }
+
+ if (client->irq) {
+ error = request_irq(client->irq, qt2160_irq,
+ IRQF_TRIGGER_FALLING, "qt2160", qt2160);
+ if (error) {
+ dev_err(&client->dev,
+ "failed to allocate irq %d\n", client->irq);
+ goto err_free_mem;
+ }
+ }
+
+ error = input_register_device(qt2160->input);
+ if (error) {
+ dev_err(&client->dev,
+ "Failed to register input device\n");
+ goto err_free_irq;
+ }
+
+ i2c_set_clientdata(client, qt2160);
+ qt2160_schedule_read(qt2160);
+
+ return 0;
+
+err_free_irq:
+ if (client->irq)
+ free_irq(client->irq, qt2160);
+err_free_mem:
+ input_free_device(input);
+ kfree(qt2160);
+ return error;
+}
+
+static int __devexit qt2160_remove(struct i2c_client *client)
+{
+ struct qt2160_data *qt2160 = i2c_get_clientdata(client);
+
+ /* Release IRQ so no queue will be scheduled */
+ if (client->irq)
+ free_irq(client->irq, qt2160);
+
+ cancel_delayed_work_sync(&qt2160->dwork);
+
+ input_unregister_device(qt2160->input);
+ kfree(qt2160);
+
+ i2c_set_clientdata(client, NULL);
+ return 0;
+}
+
+static struct i2c_device_id qt2160_idtable[] = {
+ { "qt2160", 0, },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, qt2160_idtable);
+
+static struct i2c_driver qt2160_driver = {
+ .driver = {
+ .name = "qt2160",
+ .owner = THIS_MODULE,
+ },
+
+ .id_table = qt2160_idtable,
+ .probe = qt2160_probe,
+ .remove = __devexit_p(qt2160_remove),
+};
+
+static int __init qt2160_init(void)
+{
+ return i2c_add_driver(&qt2160_driver);
+}
+module_init(qt2160_init);
+
+static void __exit qt2160_cleanup(void)
+{
+ i2c_del_driver(&qt2160_driver);
+}
+module_exit(qt2160_cleanup);
+
+MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>");
+MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor");
+MODULE_LICENSE("GPL");
*/
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/interrupt.h>
config INPUT_WINBOND_CIR
tristate "Winbond IR remote control"
depends on X86 && PNP
+ select NEW_LEDS
select LEDS_CLASS
+ select LEDS_TRIGGERS
select BITREVERSE
help
Say Y here if you want to use the IR remote functionality found
{ 0x3169, KEY_PAUSE, },
};
-/* runs in an IRQ thread -- can (and will!) sleep */
+/*
+ * Because we communicate with the MSP430 using I2C, and all I2C calls
+ * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is
+ * active low, but we go through the GPIO controller so we can trigger
+ * on falling edges and not worry about enabling/disabling the IRQ in
+ * the keypress handling path.
+ */
static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
{
struct dm355evm_keys *keys = _keys;
return IRQ_HANDLED;
}
-/*
- * Because we communicate with the MSP430 using I2C, and all I2C calls
- * in Linux sleep, we use a threaded IRQ handler. The IRQ itself is
- * active low, but we go through the GPIO controller so we can trigger
- * on falling edges and not worry about enabling/disabling the IRQ in
- * the keypress handling path.
- */
-static irqreturn_t dm355evm_keys_hardirq(int irq, void *_keys)
-{
- return IRQ_WAKE_THREAD;
-}
-
static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode)
{
u16 old_keycode;
/* REVISIT: flush the event queue? */
- status = request_threaded_irq(keys->irq,
- dm355evm_keys_hardirq, dm355evm_keys_irq,
- IRQF_TRIGGER_FALLING,
- dev_name(&pdev->dev), keys);
+ status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
+ IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
if (status < 0)
goto fail1;
/* Read the i8042 fast handshake timer */
static inline int hp_sdc_rtc_read_fhs(struct timeval *res) {
- uint64_t raw;
+ int64_t raw;
unsigned int tenms;
raw = hp_sdc_rtc_read_i8042timer(HP_SDC_CMD_LOAD_FHS, 2);
struct input_dev *input;
int err;
- if (!pdata || !pdata->steps) {
- dev_err(&pdev->dev, "invalid platform data\n");
+ if (!pdata) {
+ dev_err(&pdev->dev, "missing platform data\n");
return -ENOENT;
}
return err;
}
-static int bbc_remove(struct of_device *op)
+static int __devexit bbc_remove(struct of_device *op)
{
struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
struct input_dev *input_dev = state->input_dev;
return err;
}
-static int grover_remove(struct of_device *op)
+static int __devexit grover_remove(struct of_device *op)
{
struct sparcspkr_state *state = dev_get_drvdata(&op->dev);
struct grover_beep_info *info = &state->u.grover;
* - first public version
*/
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
},
.driver_data = keymap_wistron_md2900
},
+ {
+ .callback = dmi_matched,
+ .ident = "Medion MD 42200",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Medion"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "WIM 2030"),
+ },
+ .driver_data = keymap_fs_amilo_pro_v2000
+ },
{
.callback = dmi_matched,
.ident = "Medion MD 96500",
PS2PP_WHEEL | PS2PP_SIDE_BTN | PS2PP_TASK_BTN |
PS2PP_EXTRA_BTN | PS2PP_NAV_BTN | PS2PP_HWHEEL },
{ 72, PS2PP_KIND_TRACKMAN, 0 }, /* T-CH11: TrackMan Marble */
- { 73, 0, PS2PP_SIDE_BTN },
+ { 73, PS2PP_KIND_TRACKMAN, PS2PP_SIDE_BTN }, /* TrackMan FX */
{ 75, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 76, PS2PP_KIND_WHEEL, PS2PP_WHEEL },
{ 79, PS2PP_KIND_TRACKMAN, PS2PP_WHEEL }, /* TrackMan with wheel */
*/
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
- mutex_lock(&ps2dev->cmd_mutex);
+
+ ps2_begin_command(ps2dev);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
goto out;
rc = 0;
out:
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n",
unsigned char v;
int rc = -1;
- mutex_lock(&ps2dev->cmd_mutex);
+ ps2_begin_command(ps2dev);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
goto out;
rc = 0;
out:
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n",
reg_addr, reg_val, rc);
return rc;
ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
- mutex_lock(&ps2dev->cmd_mutex);
+
+ ps2_begin_command(ps2dev);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
goto out;
rc = 0;
out:
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n",
unsigned char v;
int rc = -1;
- mutex_lock(&ps2dev->cmd_mutex);
+ ps2_begin_command(ps2dev);
if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
goto out;
rc = 0;
out:
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n",
reg_val, rc);
return rc;
DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M300"),
},
+
+ },
+ {
+ .ident = "Toshiba Portege M300",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Portable PC"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Version 1.0"),
+ },
+
},
{ }
};
* and the irq configuration should be set to Falling Edge Trigger
*/
/* Control IRQ / Polling option */
-static int polling_req;
+static bool polling_req;
module_param(polling_req, bool, 0444);
MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)");
struct i2c_client *client;
struct input_dev *input;
struct delayed_work dwork;
+ spinlock_t lock;
int no_data_count;
int no_decel_param;
int reduce_report_param;
return xy_delta || gesture;
}
-static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
+static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch,
+ unsigned long delay)
{
- struct synaptics_i2c *touch = dev_id;
+ unsigned long flags;
+
+ spin_lock_irqsave(&touch->lock, flags);
/*
- * We want to have the work run immediately but it might have
- * already been scheduled with a delay, that's why we have to
- * cancel it first.
+ * If work is already scheduled then subsequent schedules will not
+ * change the scheduled time that's why we have to cancel it first.
*/
- cancel_delayed_work(&touch->dwork);
- schedule_delayed_work(&touch->dwork, 0);
+ __cancel_delayed_work(&touch->dwork);
+ schedule_delayed_work(&touch->dwork, delay);
+
+ spin_unlock_irqrestore(&touch->lock, flags);
+}
+
+static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
+{
+ struct synaptics_i2c *touch = dev_id;
+
+ synaptics_i2c_reschedule_work(touch, 0);
return IRQ_HANDLED;
}
* We poll the device once in THREAD_IRQ_SLEEP_SECS and
* if error is detected, we try to reset and reconfigure the touchpad.
*/
- schedule_delayed_work(&touch->dwork, delay);
+ synaptics_i2c_reschedule_work(touch, delay);
}
static int synaptics_i2c_open(struct input_dev *input)
return ret;
if (polling_req)
- schedule_delayed_work(&touch->dwork,
- msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+ synaptics_i2c_reschedule_work(touch,
+ msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
return 0;
}
touch->scan_rate_param = scan_rate;
set_scan_rate(touch, scan_rate);
INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
+ spin_lock_init(&touch->lock);
return touch;
}
if (!touch)
return -ENOMEM;
- i2c_set_clientdata(client, touch);
-
ret = synaptics_i2c_reset_config(client);
if (ret)
goto err_mem_free;
if (client->irq < 1)
- polling_req = 1;
+ polling_req = true;
touch->input = input_allocate_device();
if (!touch->input) {
dev_warn(&touch->client->dev,
"IRQ request failed: %d, "
"falling back to polling\n", ret);
- polling_req = 1;
+ polling_req = true;
synaptics_i2c_reg_set(touch->client,
INTERRUPT_EN_REG, 0);
}
"Input device register failed: %d\n", ret);
goto err_input_free;
}
+
+ i2c_set_clientdata(client, touch);
+
return 0;
err_input_free:
input_free_device(touch->input);
err_mem_free:
- i2c_set_clientdata(client, NULL);
kfree(touch);
return ret;
struct synaptics_i2c *touch = i2c_get_clientdata(client);
if (!polling_req)
- free_irq(touch->client->irq, touch);
+ free_irq(client->irq, touch);
input_unregister_device(touch->input);
i2c_set_clientdata(client, NULL);
if (ret)
return ret;
- schedule_delayed_work(&touch->dwork,
- msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+ synaptics_i2c_reschedule_work(touch,
+ msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
return 0;
}
#define MOUSEDEV_MINORS 32
#define MOUSEDEV_MIX 31
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/poll.h>
config SERIO
tristate "Serial I/O support" if EMBEDDED || !X86
default y
- ---help---
+ help
Say Yes here if you have any input device that uses serial I/O to
communicate with the system. This includes the
* standard AT keyboard and PS/2 mouse *
tristate "i8042 PC Keyboard controller" if EMBEDDED || !X86
default y
depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && !M68K && !BLACKFIN
- ---help---
+ help
i8042 is the chip over which the standard AT keyboard and PS/2
mouse are connected to the computer. If you use these devices,
you'll need to say Y here.
config SERIO_SERPORT
tristate "Serial port line discipline"
default y
- ---help---
+ help
Say Y here if you plan to use an input device (mouse, joystick,
tablet, 6dof) that communicates over the RS232 serial (COM) port.
config SERIO_CT82C710
tristate "ct82c710 Aux port controller"
depends on X86
- ---help---
+ help
Say Y here if you have a Texas Instruments TravelMate notebook
equipped with the ct82c710 chip and want to use a mouse connected
to the "QuickPort".
config SERIO_PARKBD
tristate "Parallel port keyboard adapter"
depends on PARPORT
- ---help---
+ help
Say Y here if you built a simple parallel port adapter to attach
an additional AT keyboard, XT keyboard or PS/2 mouse.
tristate "HP System Device Controller i8042 Support"
depends on (GSC || HP300) && SERIO
default y
- ---help---
+ help
This option enables support for the "System Device
Controller", an i8042 carrying microcode to manage a
few miscellaneous devices on some Hewlett Packard systems.
config SERIO_LIBPS2
tristate "PS/2 driver library" if EMBEDDED
+ depends on SERIO_I8042 || SERIO_I8042=n
help
Say Y here if you are using a driver for device connected
to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"),
},
},
+ {
+ /*
+ * Reset and GET ID commands issued via KBD port are
+ * sometimes being delivered to AUX3.
+ */
+ .ident = "Sony Vaio FZ-240E",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
+ },
+ },
{
.ident = "Amoi M636/A737",
.matches = {
static int __init i8042_pnp_init(void)
{
char kbd_irq_str[4] = { 0 }, aux_irq_str[4] = { 0 };
- int pnp_data_busted = false;
+ bool pnp_data_busted = false;
int err;
#ifdef CONFIG_X86
#include "i8042.h"
+/*
+ * i8042_lock protects serialization between i8042_command and
+ * the interrupt handler.
+ */
static DEFINE_SPINLOCK(i8042_lock);
+/*
+ * Writers to AUX and KBD ports as well as users issuing i8042_command
+ * directly should acquire i8042_mutex (by means of calling
+ * i8042_lock_chip() and i8042_unlock_ship() helpers) to ensure that
+ * they do not disturb each other (unfortunately in many i8042
+ * implementations write to one of the ports will immediately abort
+ * command that is being processed by another port).
+ */
+static DEFINE_MUTEX(i8042_mutex);
+
struct i8042_port {
struct serio *serio;
int irq;
static irqreturn_t i8042_interrupt(int irq, void *dev_id);
+void i8042_lock_chip(void)
+{
+ mutex_lock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_lock_chip);
+
+void i8042_unlock_chip(void)
+{
+ mutex_unlock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_unlock_chip);
+
/*
* The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
* be ready for reading values from it / writing values to it.
str = i8042_read_status();
if (str & I8042_STR_OBF) {
data = i8042_read_data();
+ dbg("%02x <- i8042 (aux_test_irq, %s)",
+ data, str & I8042_STR_AUXDATA ? "aux" : "kbd");
if (i8042_irq_being_tested &&
data == 0xa5 && (str & I8042_STR_AUXDATA))
complete(&i8042_aux_irq_delivered);
* AUX IRQ was never delivered so we need to flush the controller to
* get rid of the byte we put there; otherwise keyboard may not work.
*/
+ dbg(" -- i8042 (aux irq test timeout)");
i8042_flush();
retval = -1;
}
static int i8042_controller_init(void)
{
unsigned long flags;
+ int n = 0;
+ unsigned char ctr[2];
/*
- * Save the CTR for restoral on unload / reboot.
+ * Save the CTR for restore on unload / reboot.
*/
- if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) {
- printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n");
- return -EIO;
- }
+ do {
+ if (n >= 10) {
+ printk(KERN_ERR
+ "i8042.c: Unable to get stable CTR read.\n");
+ return -EIO;
+ }
+
+ if (n != 0)
+ udelay(50);
+
+ if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) {
+ printk(KERN_ERR
+ "i8042.c: Can't read CTR while initializing i8042.\n");
+ return -EIO;
+ }
+
+ } while (n < 2 || ctr[0] != ctr[1]);
- i8042_initial_ctr = i8042_ctr;
+ i8042_initial_ctr = i8042_ctr = ctr[0];
/*
* Disable the keyboard interface and interrupt.
return -EIO;
}
+/*
+ * Flush whatever accumulated while we were disabling keyboard port.
+ */
+
+ i8042_flush();
+
return 0;
}
i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS;
i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT);
- if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR))
+ if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR))
printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n");
/*
}
}
+/*
+ * Checks whether port belongs to i8042 controller.
+ */
+bool i8042_check_port_owner(const struct serio *port)
+{
+ int i;
+
+ for (i = 0; i < I8042_NUM_PORTS; i++)
+ if (i8042_ports[i].serio == port)
+ return true;
+
+ return false;
+}
+EXPORT_SYMBOL(i8042_check_port_owner);
+
static void i8042_free_irqs(void)
{
if (i8042_aux_irq_registered)
#include <linux/delay.h>
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/serio.h>
+#include <linux/i8042.h>
#include <linux/init.h>
#include <linux/libps2.h>
}
EXPORT_SYMBOL(ps2_sendbyte);
+void ps2_begin_command(struct ps2dev *ps2dev)
+{
+ mutex_lock(&ps2dev->cmd_mutex);
+
+ if (i8042_check_port_owner(ps2dev->serio))
+ i8042_lock_chip();
+}
+EXPORT_SYMBOL(ps2_begin_command);
+
+void ps2_end_command(struct ps2dev *ps2dev)
+{
+ if (i8042_check_port_owner(ps2dev->serio))
+ i8042_unlock_chip();
+
+ mutex_unlock(&ps2dev->cmd_mutex);
+}
+EXPORT_SYMBOL(ps2_end_command);
+
/*
* ps2_drain() waits for device to transmit requested number of bytes
* and discards them.
maxbytes = sizeof(ps2dev->cmdbuf);
}
- mutex_lock(&ps2dev->cmd_mutex);
+ ps2_begin_command(ps2dev);
serio_pause_rx(ps2dev->serio);
ps2dev->flags = PS2_FLAG_CMD;
wait_event_timeout(ps2dev->wait,
!(ps2dev->flags & PS2_FLAG_CMD),
msecs_to_jiffies(timeout));
- mutex_unlock(&ps2dev->cmd_mutex);
+
+ ps2_end_command(ps2dev);
}
EXPORT_SYMBOL(ps2_drain);
{
int rc;
- mutex_lock(&ps2dev->cmd_mutex);
+ ps2_begin_command(ps2dev);
rc = __ps2_command(ps2dev, param, command);
- mutex_unlock(&ps2dev->cmd_mutex);
+ ps2_end_command(ps2dev);
return rc;
}
* the Free Software Foundation.
*/
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/poll.h>
#include <asm/uaccess.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/init.h>
select TOUCHSCREEN_AD7879
help
Say Y here if you have a touchscreen interface using the
- AD7879-1 controller, and your board-specific initialization
- code includes that in its table of I2C devices.
+ AD7879-1/AD7889-1 controller, and your board-specific
+ initialization code includes that in its table of I2C devices.
If unsure, say N (but it's safe to say "Y").
select TOUCHSCREEN_AD7879
help
Say Y here if you have a touchscreen interface using the
- AD7879 controller, and your board-specific initialization
+ AD7879/AD7889 controller, and your board-specific initialization
code includes that in its table of SPI devices.
If unsure, say N (but it's safe to say "Y").
To compile this driver as a module, choose M here: the
module will be called wacom_w8001.
+config TOUCHSCREEN_MCS5000
+ tristate "MELFAS MCS-5000 touchscreen"
+ depends on I2C
+ help
+ Say Y here if you have the MELFAS MCS-5000 touchscreen controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mcs5000_ts.
config TOUCHSCREEN_MTOUCH
tristate "MicroTouch serial touchscreens"
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
+obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
/*
- * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc.
+ * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc.
*
- * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface)
+ * Description: AD7879/AD7889 based touchscreen, and GPIO driver
+ * (I2C/SPI Interface)
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
kfree(ts);
}
- return 0;
+ return error;
}
static int __devexit ad7879_remove(struct spi_device *spi)
kfree(ts);
}
- return 0;
+ return error;
}
static int __devexit ad7879_remove(struct i2c_client *client)
static const struct i2c_device_id ad7879_id[] = {
{ "ad7879", 0 },
+ { "ad7889", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ad7879_id);
--- /dev/null
+/*
+ * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Based on wm97xx-core.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mcs5000_ts.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+
+/* Registers */
+#define MCS5000_TS_STATUS 0x00
+#define STATUS_OFFSET 0
+#define STATUS_NO (0 << STATUS_OFFSET)
+#define STATUS_INIT (1 << STATUS_OFFSET)
+#define STATUS_SENSING (2 << STATUS_OFFSET)
+#define STATUS_COORD (3 << STATUS_OFFSET)
+#define STATUS_GESTURE (4 << STATUS_OFFSET)
+#define ERROR_OFFSET 4
+#define ERROR_NO (0 << ERROR_OFFSET)
+#define ERROR_POWER_ON_RESET (1 << ERROR_OFFSET)
+#define ERROR_INT_RESET (2 << ERROR_OFFSET)
+#define ERROR_EXT_RESET (3 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_ADDRESS (8 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_VALUE (9 << ERROR_OFFSET)
+
+#define MCS5000_TS_OP_MODE 0x01
+#define RESET_OFFSET 0
+#define RESET_NO (0 << RESET_OFFSET)
+#define RESET_EXT_SOFT (1 << RESET_OFFSET)
+#define OP_MODE_OFFSET 1
+#define OP_MODE_SLEEP (0 << OP_MODE_OFFSET)
+#define OP_MODE_ACTIVE (1 << OP_MODE_OFFSET)
+#define GESTURE_OFFSET 4
+#define GESTURE_DISABLE (0 << GESTURE_OFFSET)
+#define GESTURE_ENABLE (1 << GESTURE_OFFSET)
+#define PROXIMITY_OFFSET 5
+#define PROXIMITY_DISABLE (0 << PROXIMITY_OFFSET)
+#define PROXIMITY_ENABLE (1 << PROXIMITY_OFFSET)
+#define SCAN_MODE_OFFSET 6
+#define SCAN_MODE_INTERRUPT (0 << SCAN_MODE_OFFSET)
+#define SCAN_MODE_POLLING (1 << SCAN_MODE_OFFSET)
+#define REPORT_RATE_OFFSET 7
+#define REPORT_RATE_40 (0 << REPORT_RATE_OFFSET)
+#define REPORT_RATE_80 (1 << REPORT_RATE_OFFSET)
+
+#define MCS5000_TS_SENS_CTL 0x02
+#define MCS5000_TS_FILTER_CTL 0x03
+#define PRI_FILTER_OFFSET 0
+#define SEC_FILTER_OFFSET 4
+
+#define MCS5000_TS_X_SIZE_UPPER 0x08
+#define MCS5000_TS_X_SIZE_LOWER 0x09
+#define MCS5000_TS_Y_SIZE_UPPER 0x0A
+#define MCS5000_TS_Y_SIZE_LOWER 0x0B
+
+#define MCS5000_TS_INPUT_INFO 0x10
+#define INPUT_TYPE_OFFSET 0
+#define INPUT_TYPE_NONTOUCH (0 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_SINGLE (1 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_DUAL (2 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PALM (3 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PROXIMITY (7 << INPUT_TYPE_OFFSET)
+#define GESTURE_CODE_OFFSET 3
+#define GESTURE_CODE_NO (0 << GESTURE_CODE_OFFSET)
+
+#define MCS5000_TS_X_POS_UPPER 0x11
+#define MCS5000_TS_X_POS_LOWER 0x12
+#define MCS5000_TS_Y_POS_UPPER 0x13
+#define MCS5000_TS_Y_POS_LOWER 0x14
+#define MCS5000_TS_Z_POS 0x15
+#define MCS5000_TS_WIDTH 0x16
+#define MCS5000_TS_GESTURE_VAL 0x17
+#define MCS5000_TS_MODULE_REV 0x20
+#define MCS5000_TS_FIRMWARE_VER 0x21
+
+/* Touchscreen absolute values */
+#define MCS5000_MAX_XC 0x3ff
+#define MCS5000_MAX_YC 0x3ff
+
+enum mcs5000_ts_read_offset {
+ READ_INPUT_INFO,
+ READ_X_POS_UPPER,
+ READ_X_POS_LOWER,
+ READ_Y_POS_UPPER,
+ READ_Y_POS_LOWER,
+ READ_BLOCK_SIZE,
+};
+
+/* Each client has this additional data */
+struct mcs5000_ts_data {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ const struct mcs5000_ts_platform_data *platform_data;
+};
+
+static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
+{
+ struct mcs5000_ts_data *data = dev_id;
+ struct i2c_client *client = data->client;
+ u8 buffer[READ_BLOCK_SIZE];
+ int err;
+ int x;
+ int y;
+
+ err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
+ READ_BLOCK_SIZE, buffer);
+ if (err < 0) {
+ dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
+ goto out;
+ }
+
+ switch (buffer[READ_INPUT_INFO]) {
+ case INPUT_TYPE_NONTOUCH:
+ input_report_key(data->input_dev, BTN_TOUCH, 0);
+ input_sync(data->input_dev);
+ break;
+
+ case INPUT_TYPE_SINGLE:
+ x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
+ y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
+
+ input_report_key(data->input_dev, BTN_TOUCH, 1);
+ input_report_abs(data->input_dev, ABS_X, x);
+ input_report_abs(data->input_dev, ABS_Y, y);
+ input_sync(data->input_dev);
+ break;
+
+ case INPUT_TYPE_DUAL:
+ /* TODO */
+ break;
+
+ case INPUT_TYPE_PALM:
+ /* TODO */
+ break;
+
+ case INPUT_TYPE_PROXIMITY:
+ /* TODO */
+ break;
+
+ default:
+ dev_err(&client->dev, "Unknown ts input type %d\n",
+ buffer[READ_INPUT_INFO]);
+ break;
+ }
+
+ out:
+ return IRQ_HANDLED;
+}
+
+static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
+{
+ const struct mcs5000_ts_platform_data *platform_data =
+ data->platform_data;
+ struct i2c_client *client = data->client;
+
+ /* Touch reset & sleep mode */
+ i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
+ RESET_EXT_SOFT | OP_MODE_SLEEP);
+
+ /* Touch size */
+ i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
+ platform_data->x_size >> 8);
+ i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
+ platform_data->x_size & 0xff);
+ i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
+ platform_data->y_size >> 8);
+ i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
+ platform_data->y_size & 0xff);
+
+ /* Touch active mode & 80 report rate */
+ i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
+ OP_MODE_ACTIVE | REPORT_RATE_80);
+}
+
+static int __devinit mcs5000_ts_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct mcs5000_ts_data *data;
+ struct input_dev *input_dev;
+ int ret;
+
+ if (!client->dev.platform_data)
+ return -EINVAL;
+
+ data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!data || !input_dev) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ ret = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ data->client = client;
+ data->input_dev = input_dev;
+ data->platform_data = client->dev.platform_data;
+
+ input_dev->name = "MELPAS MCS-5000 Touchscreen";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &client->dev;
+
+ __set_bit(EV_ABS, input_dev->evbit);
+ __set_bit(EV_KEY, input_dev->evbit);
+ __set_bit(BTN_TOUCH, input_dev->keybit);
+ input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
+
+ input_set_drvdata(input_dev, data);
+
+ if (data->platform_data->cfg_pin)
+ data->platform_data->cfg_pin();
+
+ ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data);
+
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to register interrupt\n");
+ goto err_free_mem;
+ }
+
+ ret = input_register_device(data->input_dev);
+ if (ret < 0)
+ goto err_free_irq;
+
+ mcs5000_ts_phys_init(data);
+ i2c_set_clientdata(client, data);
+
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, data);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(data);
+ return ret;
+}
+
+static int __devexit mcs5000_ts_remove(struct i2c_client *client)
+{
+ struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+
+ free_irq(client->irq, data);
+ input_unregister_device(data->input_dev);
+ kfree(data);
+ i2c_set_clientdata(client, NULL);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ /* Touch sleep mode */
+ i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
+
+ return 0;
+}
+
+static int mcs5000_ts_resume(struct i2c_client *client)
+{
+ struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+
+ mcs5000_ts_phys_init(data);
+
+ return 0;
+}
+#else
+#define mcs5000_ts_suspend NULL
+#define mcs5000_ts_resume NULL
+#endif
+
+static const struct i2c_device_id mcs5000_ts_id[] = {
+ { "mcs5000_ts", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
+
+static struct i2c_driver mcs5000_ts_driver = {
+ .probe = mcs5000_ts_probe,
+ .remove = __devexit_p(mcs5000_ts_remove),
+ .suspend = mcs5000_ts_suspend,
+ .resume = mcs5000_ts_resume,
+ .driver = {
+ .name = "mcs5000_ts",
+ },
+ .id_table = mcs5000_ts_id,
+};
+
+static int __init mcs5000_ts_init(void)
+{
+ return i2c_add_driver(&mcs5000_ts_driver);
+}
+
+static void __exit mcs5000_ts_exit(void)
+{
+ i2c_del_driver(&mcs5000_ts_driver);
+}
+
+module_init(mcs5000_ts_init);
+module_exit(mcs5000_ts_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
+MODULE_LICENSE("GPL");
static int wm97xx_probe(struct device *dev)
{
struct wm97xx *wm;
+ struct wm97xx_pdata *pdata = dev->platform_data;
int ret = 0, id = 0;
wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
}
platform_set_drvdata(wm->battery_dev, wm);
wm->battery_dev->dev.parent = dev;
+ wm->battery_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->battery_dev);
if (ret < 0)
goto batt_reg_err;
}
platform_set_drvdata(wm->touch_dev, wm);
wm->touch_dev->dev.parent = dev;
+ wm->touch_dev->dev.platform_data = pdata;
ret = platform_device_add(wm->touch_dev);
if (ret < 0)
goto touch_reg_err;
if (CAPIMSG_CMD(skb->data) == CAPI_CONNECT_B3_CONF) {
u16 info = CAPIMSG_U16(skb->data, 12); // Info field
- if (info == 0) {
+ if ((info & 0xff00) == 0) {
mutex_lock(&cdev->ncci_list_mtx);
capincci_alloc(cdev, CAPIMSG_NCCI(skb->data));
mutex_unlock(&cdev->ncci_list_mtx);
MODULE_DESCRIPTION("CAPI4Linux: Interface to ISDN4Linux");
MODULE_AUTHOR("Carsten Paeth");
MODULE_LICENSE("GPL");
-module_param(debugmode, uint, 0);
+module_param(debugmode, uint, S_IRUGO|S_IWUSR);
/* -------- type definitions ----------------------------------------- */
NULL, /* Useruserdata */ /* $$$$ */
NULL /* Facilitydataarray */
);
- send_message(card, &cmsg);
plci_change_state(card, ncci->plcip, EV_PLCI_DISCONNECT_REQ);
+ send_message(card, &cmsg);
cmd.command = ISDN_STAT_BHUP;
cmd.driver = card->myid;
*/
capi_cmsg_answer(cmsg);
cmsg->Reject = 1; /* ignore */
- send_message(card, cmsg);
plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT);
+ send_message(card, cmsg);
printk(KERN_INFO "capidrv-%d: incoming call %s,%d,%d,%s ignored\n",
card->contrnr,
cmd.parm.setup.phone,
case 2: /* Call will be rejected. */
capi_cmsg_answer(cmsg);
cmsg->Reject = 2; /* reject call, normal call clearing */
- send_message(card, cmsg);
plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT);
+ send_message(card, cmsg);
break;
default:
capi_cmsg_answer(cmsg);
cmsg->Reject = 8; /* reject call,
destination out of order */
- send_message(card, cmsg);
plci_change_state(card, plcip, EV_PLCI_CONNECT_REJECT);
+ send_message(card, cmsg);
break;
}
return;
card->bchans[plcip->chan].disconnecting = 1;
plci_change_state(card, plcip, EV_PLCI_DISCONNECT_IND);
capi_cmsg_answer(cmsg);
- send_message(card, cmsg);
plci_change_state(card, plcip, EV_PLCI_DISCONNECT_RESP);
+ send_message(card, cmsg);
break;
case CAPI_DISCONNECT_CONF: /* plci */
if (card->bchans[plcip->chan].incoming) {
capi_cmsg_answer(cmsg);
- send_message(card, cmsg);
plci_change_state(card, plcip, EV_PLCI_CONNECT_ACTIVE_IND);
+ send_message(card, cmsg);
} else {
capidrv_ncci *nccip;
capi_cmsg_answer(cmsg);
NULL /* NCPI */
);
nccip->msgid = cmsg->Messagenumber;
+ plci_change_state(card, plcip,
+ EV_PLCI_CONNECT_ACTIVE_IND);
+ ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_REQ);
send_message(card, cmsg);
cmd.command = ISDN_STAT_DCONN;
cmd.driver = card->myid;
cmd.arg = plcip->chan;
card->interface.statcallb(&cmd);
- plci_change_state(card, plcip, EV_PLCI_CONNECT_ACTIVE_IND);
- ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_REQ);
}
break;
goto notfound;
capi_cmsg_answer(cmsg);
- send_message(card, cmsg);
ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_ACTIVE_IND);
+ send_message(card, cmsg);
cmd.command = ISDN_STAT_BCONN;
cmd.driver = card->myid;
0, /* Reject */
NULL /* NCPI */
);
- send_message(card, cmsg);
ncci_change_state(card, nccip, EV_NCCI_CONNECT_B3_RESP);
+ send_message(card, cmsg);
break;
}
printk(KERN_ERR "capidrv-%d: no mem for ncci, sorry\n", card->contrnr);
card->bchans[nccip->chan].disconnecting = 1;
ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_IND);
capi_cmsg_answer(cmsg);
- send_message(card, cmsg);
ncci_change_state(card, nccip, EV_NCCI_DISCONNECT_B3_RESP);
+ send_message(card, cmsg);
break;
case CAPI_DISCONNECT_B3_CONF: /* ncci */
card->cipmask,
card->cipmask2,
NULL, NULL);
- send_message(card, &cmdcmsg);
listen_change_state(card, EV_LISTEN_REQ);
+ send_message(card, &cmdcmsg);
}
static void listentimerfunc(unsigned long x)
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/proc_fs.h>
+#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/skbuff.h>
#include <linux/workqueue.h>
#else
#include <linux/fs.h>
#endif
+#include <linux/sched.h>
#include <linux/isdnif.h>
#include <net/net_namespace.h>
#include "isdn_divert.h"
return startbytes - numbytes;
}
-/* process a block of data received from the device
+/**
+ * gigaset_m10x_input() - process a block of data received from the device
+ * @inbuf: received data and device descriptor structure.
+ *
+ * Called by hardware module {ser,usb}_gigaset with a block of received
+ * bytes. Separates the bytes received over the serial data channel into
+ * user data and command replies (locked/unlocked) according to the
+ * current state of the interface.
*/
void gigaset_m10x_input(struct inbuf_t *inbuf)
{
return iraw_skb;
}
-/* gigaset_send_skb
- * called by common.c to queue an skb for sending
- * and start transmission if necessary
- * parameters:
- * B Channel control structure
- * skb
+/**
+ * gigaset_m10x_send_skb() - queue an skb for sending
+ * @bcs: B channel descriptor structure.
+ * @skb: data to send.
+ *
+ * Called by i4l.c to encode and queue an skb for sending, and start
+ * transmission if necessary.
+ *
* Return value:
- * number of bytes accepted for sending
- * (skb->len if ok, 0 if out of buffer space)
- * or error code (< 0, eg. -EINVAL)
+ * number of bytes accepted for sending (skb->len) if ok,
+ * error code < 0 (eg. -ENOMEM) on error
*/
int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb)
{
#define BS_ATRDPEND 0x040 /* urb_cmd_in in use */
#define BS_ATWRPEND 0x080 /* urb_cmd_out in use */
#define BS_SUSPEND 0x100 /* USB port suspended */
+#define BS_RESETTING 0x200 /* waiting for HD_RESET_INTERRUPT_PIPE_ACK */
static struct gigaset_driver *driver = NULL;
return -EINVAL;
}
+/* set/clear bits in base connection state, return previous state
+ */
+static inline int update_basstate(struct bas_cardstate *ucs,
+ int set, int clear)
+{
+ unsigned long flags;
+ int state;
+
+ spin_lock_irqsave(&ucs->lock, flags);
+ state = ucs->basstate;
+ ucs->basstate = (state & ~clear) | set;
+ spin_unlock_irqrestore(&ucs->lock, flags);
+ return state;
+}
+
/* error_hangup
* hang up any existing connection because of an unrecoverable error
* This function may be called from any context and takes care of scheduling
*/
static inline void error_reset(struct cardstate *cs)
{
- /* close AT command channel to recover (ignore errors) */
- req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
-
- //FIXME try to recover without bothering the user
- dev_err(cs->dev,
- "unrecoverable error - please disconnect Gigaset base to reset\n");
+ /* reset interrupt pipe to recover (ignore errors) */
+ update_basstate(cs->hw.bas, BS_RESETTING, 0);
+ req_submit(cs->bcs, HD_RESET_INTERRUPT_PIPE, 0, BAS_TIMEOUT);
}
/* check_pending
case HD_DEVICE_INIT_ACK: /* no reply expected */
ucs->pending = 0;
break;
- /* HD_READ_ATMESSAGE, HD_WRITE_ATMESSAGE, HD_RESET_INTERRUPTPIPE
- * are handled separately and should never end up here
+ case HD_RESET_INTERRUPT_PIPE:
+ if (!(ucs->basstate & BS_RESETTING))
+ ucs->pending = 0;
+ break;
+ /*
+ * HD_READ_ATMESSAGE and HD_WRITE_ATMESSAGE are handled separately
+ * and should never end up here
*/
default:
dev_warn(&ucs->interface->dev,
error_reset(cs);
}
-/* set/clear bits in base connection state, return previous state
- */
-inline static int update_basstate(struct bas_cardstate *ucs,
- int set, int clear)
-{
- unsigned long flags;
- int state;
-
- spin_lock_irqsave(&ucs->lock, flags);
- state = ucs->basstate;
- ucs->basstate = (state & ~clear) | set;
- spin_unlock_irqrestore(&ucs->lock, flags);
- return state;
-}
-
/* read_ctrl_callback
* USB completion handler for control pipe input
* called by the USB subsystem in interrupt context
break;
case HD_RESET_INTERRUPT_PIPE_ACK:
- gig_dbg(DEBUG_USBREQ, "HD_RESET_INTERRUPT_PIPE_ACK");
+ update_basstate(ucs, 0, BS_RESETTING);
+ dev_notice(cs->dev, "interrupt pipe reset\n");
break;
case HD_SUSPEND_END:
rcvbuf = urb->transfer_buffer;
totleft = urb->actual_length;
for (frame = 0; totleft > 0 && frame < BAS_NUMFRAMES; frame++) {
- if (unlikely(urb->iso_frame_desc[frame].status)) {
+ numbytes = urb->iso_frame_desc[frame].actual_length;
+ if (unlikely(urb->iso_frame_desc[frame].status))
dev_warn(cs->dev,
- "isochronous read: frame %d: %s\n",
- frame,
+ "isochronous read: frame %d[%d]: %s\n",
+ frame, numbytes,
get_usb_statmsg(
urb->iso_frame_desc[frame].status));
- break;
- }
- numbytes = urb->iso_frame_desc[frame].actual_length;
- if (unlikely(numbytes > BAS_MAXFRAME)) {
+ if (unlikely(numbytes > BAS_MAXFRAME))
dev_warn(cs->dev,
"isochronous read: frame %d: "
"numbytes (%d) > BAS_MAXFRAME\n",
frame, numbytes);
- break;
- }
if (unlikely(numbytes > totleft)) {
dev_warn(cs->dev,
"isochronous read: frame %d: "
"numbytes (%d) > totleft (%d)\n",
frame, numbytes, totleft);
- break;
+ numbytes = totleft;
}
offset = urb->iso_frame_desc[frame].offset;
if (unlikely(offset + numbytes > BAS_INBUFSIZE)) {
"offset (%d) + numbytes (%d) "
"> BAS_INBUFSIZE\n",
frame, offset, numbytes);
- break;
+ numbytes = BAS_INBUFSIZE - offset;
}
gigaset_isoc_receive(rcvbuf + offset, numbytes, bcs);
totleft -= numbytes;
case HD_CLOSE_ATCHANNEL:
dev_err(bcs->cs->dev, "timeout closing AT channel\n");
+ error_reset(bcs->cs);
break;
case HD_CLOSE_B2CHANNEL:
error_reset(bcs->cs);
break;
+ case HD_RESET_INTERRUPT_PIPE:
+ /* error recovery escalation */
+ dev_err(bcs->cs->dev,
+ "reset interrupt pipe timeout, attempting USB reset\n");
+ usb_queue_reset_device(bcs->cs->hw.bas->interface);
+ break;
+
default:
dev_warn(bcs->cs->dev, "request 0x%02x timed out, clearing\n",
pending);
goto notqueued;
}
+ /* translate "+++" escape sequence sent as a single separate command
+ * into "close AT channel" command for error recovery
+ * The next command will reopen the AT channel automatically.
+ */
+ if (len == 3 && !memcmp(buf, "+++", 3)) {
+ rc = req_submit(cs->bcs, HD_CLOSE_ATCHANNEL, 0, BAS_TIMEOUT);
+ goto notqueued;
+ }
+
if (len > IF_WRITEBUF)
len = IF_WRITEBUF;
if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
#define DRIVER_AUTHOR "Hansjoerg Lipp <hjlipp@web.de>, Tilman Schmidt <tilman@imap.cc>, Stefan Eilers"
#define DRIVER_DESC "Driver for Gigaset 307x"
+#ifdef CONFIG_GIGASET_DEBUG
+#define DRIVER_DESC_DEBUG " (debug build)"
+#else
+#define DRIVER_DESC_DEBUG ""
+#endif
+
/* Module parameters */
int gigaset_debuglevel = DEBUG_DEFAULT;
EXPORT_SYMBOL_GPL(gigaset_debuglevel);
#define VALID_MINOR 0x01
#define VALID_ID 0x02
+/**
+ * gigaset_dbg_buffer() - dump data in ASCII and hex for debugging
+ * @level: debugging level.
+ * @msg: message prefix.
+ * @len: number of bytes to dump.
+ * @buf: data to dump.
+ *
+ * If the current debugging level includes one of the bits set in @level,
+ * @len bytes starting at @buf are logged to dmesg at KERN_DEBUG prio,
+ * prefixed by the text @msg.
+ */
void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
size_t len, const unsigned char *buf)
{
spin_unlock_irqrestore(&cs->ev_lock, flags);
}
+/**
+ * gigaset_add_event() - add event to device event queue
+ * @cs: device descriptor structure.
+ * @at_state: connection state structure.
+ * @type: event type.
+ * @ptr: pointer parameter for event.
+ * @parameter: integer parameter for event.
+ * @arg: pointer parameter for event.
+ *
+ * Allocate an event queue entry from the device's event queue, and set it up
+ * with the parameters given.
+ *
+ * Return value: added event
+ */
struct event_t *gigaset_add_event(struct cardstate *cs,
struct at_state_t *at_state, int type,
void *ptr, int parameter, void *arg)
spin_unlock_irqrestore(&drv->lock, flags);
}
+/**
+ * gigaset_freecs() - free all associated ressources of a device
+ * @cs: device descriptor structure.
+ *
+ * Stops all tasklets and timers, unregisters the device from all
+ * subsystems it was registered to, deallocates the device structure
+ * @cs and all structures referenced from it.
+ * Operations on the device should be stopped before calling this.
+ */
void gigaset_freecs(struct cardstate *cs)
{
int i;
inbuf->inputstate = inputstate;
}
-/* append received bytes to inbuf */
+/**
+ * gigaset_fill_inbuf() - append received data to input buffer
+ * @inbuf: buffer structure.
+ * @src: received data.
+ * @numbytes: number of bytes received.
+ */
int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
unsigned numbytes)
{
return NULL;
}
-/* gigaset_initcs
+/**
+ * gigaset_initcs() - initialize device structure
+ * @drv: hardware driver the device belongs to
+ * @channels: number of B channels supported by device
+ * @onechannel: !=0 if B channel data and AT commands share one
+ * communication channel (M10x),
+ * ==0 if B channels have separate communication channels (base)
+ * @ignoreframes: number of frames to ignore after setting up B channel
+ * @cidmode: !=0: start in CallID mode
+ * @modulename: name of driver module for LL registration
+ *
* Allocate and initialize cardstate structure for Gigaset driver
* Calls hardware dependent gigaset_initcshw() function
* Calls B channel initialization function gigaset_initbcs() for each B channel
- * parameters:
- * drv hardware driver the device belongs to
- * channels number of B channels supported by device
- * onechannel !=0: B channel data and AT commands share one
- * communication channel
- * ==0: B channels have separate communication channels
- * ignoreframes number of frames to ignore after setting up B channel
- * cidmode !=0: start in CallID mode
- * modulename name of driver module (used for I4L registration)
- * return value:
+ *
+ * Return value:
* pointer to cardstate structure
*/
struct cardstate *gigaset_initcs(struct gigaset_driver *drv, int channels,
}
+/**
+ * gigaset_start() - start device operations
+ * @cs: device descriptor structure.
+ *
+ * Prepares the device for use by setting up communication parameters,
+ * scheduling an EV_START event to initiate device initialization, and
+ * waiting for completion of the initialization.
+ *
+ * Return value:
+ * 1 - success, 0 - error
+ */
int gigaset_start(struct cardstate *cs)
{
unsigned long flags;
}
EXPORT_SYMBOL_GPL(gigaset_start);
-/* gigaset_shutdown
- * check if a device is associated to the cardstate structure and stop it
- * return value: 0 if ok, -1 if no device was associated
+/**
+ * gigaset_shutdown() - shut down device operations
+ * @cs: device descriptor structure.
+ *
+ * Deactivates the device by scheduling an EV_SHUTDOWN event and
+ * waiting for completion of the shutdown.
+ *
+ * Return value:
+ * 0 - success, -1 - error (no device associated)
*/
int gigaset_shutdown(struct cardstate *cs)
{
}
EXPORT_SYMBOL_GPL(gigaset_shutdown);
+/**
+ * gigaset_stop() - stop device operations
+ * @cs: device descriptor structure.
+ *
+ * Stops operations on the device by scheduling an EV_STOP event and
+ * waiting for completion of the shutdown.
+ */
void gigaset_stop(struct cardstate *cs)
{
mutex_lock(&cs->mutex);
return gigaset_get_cs_by_minor(tty->index + tty->driver->minor_start);
}
+/**
+ * gigaset_freedriver() - free all associated ressources of a driver
+ * @drv: driver descriptor structure.
+ *
+ * Unregisters the driver from the system and deallocates the driver
+ * structure @drv and all structures referenced from it.
+ * All devices should be shut down before calling this.
+ */
void gigaset_freedriver(struct gigaset_driver *drv)
{
unsigned long flags;
}
EXPORT_SYMBOL_GPL(gigaset_freedriver);
-/* gigaset_initdriver
+/**
+ * gigaset_initdriver() - initialize driver structure
+ * @minor: First minor number
+ * @minors: Number of minors this driver can handle
+ * @procname: Name of the driver
+ * @devname: Name of the device files (prefix without minor number)
+ *
* Allocate and initialize gigaset_driver structure. Initialize interface.
- * parameters:
- * minor First minor number
- * minors Number of minors this driver can handle
- * procname Name of the driver
- * devname Name of the device files (prefix without minor number)
- * return value:
+ *
+ * Return value:
* Pointer to the gigaset_driver structure on success, NULL on failure.
*/
struct gigaset_driver *gigaset_initdriver(unsigned minor, unsigned minors,
}
EXPORT_SYMBOL_GPL(gigaset_initdriver);
+/**
+ * gigaset_blockdriver() - block driver
+ * @drv: driver descriptor structure.
+ *
+ * Prevents the driver from attaching new devices, in preparation for
+ * deregistration.
+ */
void gigaset_blockdriver(struct gigaset_driver *drv)
{
drv->blocked = 1;
if (gigaset_debuglevel == 1)
gigaset_debuglevel = DEBUG_DEFAULT;
- pr_info(DRIVER_DESC "\n");
+ pr_info(DRIVER_DESC DRIVER_DESC_DEBUG "\n");
return 0;
}
/* leave dle mode */
{RSP_INIT, 0, 0,SEQ_DLE0, 201, 5, {0}, "^SDLE=0\r"},
{RSP_OK, 201,201, -1, 202,-1},
- //{RSP_ZDLE, 202,202, 0, 202, 0, {ACT_ERROR}},//DELETE
{RSP_ZDLE, 202,202, 0, 0, 0, {ACT_DLE0}},
{RSP_NODEV, 200,249, -1, 0, 0, {ACT_FAKEDLE0}},
{RSP_ERROR, 200,249, -1, 0, 0, {ACT_FAILDLE0}},
{EV_SHUTDOWN, -1, -1, -1, -1,-1, {ACT_SHUTDOWN}}, //FIXME
/* misc. */
+ {RSP_ERROR, -1, -1, -1, -1, -1, {ACT_ERROR} },
{RSP_EMPTY, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME
{RSP_ZCFGT, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME
{RSP_ZCFG, -1, -1, -1, -1,-1, {ACT_DEBUG}}, //FIXME
{RSP_INIT, -1, -1,SEQ_HUP, 401, 5, {0}, "+VLS=0\r"}, /* hang up */ //-1,-1?
{RSP_OK, 401,401, -1, 402, 5},
{RSP_ZVLS, 402,402, 0, 403, 5},
- {RSP_ZSAU, 403,403,ZSAU_DISCONNECT_REQ, -1,-1, {ACT_DEBUG}}, /* if not remote hup */
- //{RSP_ZSAU, 403,403,ZSAU_NULL, 401, 0, {ACT_ERROR}}, //DELETE//FIXME -> DLE0 // should we do this _before_ hanging up for base driver?
- {RSP_ZSAU, 403,403,ZSAU_NULL, 0, 0, {ACT_DISCONNECT}}, //FIXME -> DLE0 // should we do this _before_ hanging up for base driver?
- {RSP_NODEV, 401,403, -1, 0, 0, {ACT_FAKEHUP}}, //FIXME -> DLE0 // should we do this _before_ hanging up for base driver?
+ {RSP_ZSAU, 403, 403, ZSAU_DISCONNECT_REQ, -1, -1, {ACT_DEBUG} },
+ {RSP_ZSAU, 403, 403, ZSAU_NULL, 0, 0, {ACT_DISCONNECT} },
+ {RSP_NODEV, 401, 403, -1, 0, 0, {ACT_FAKEHUP} },
{RSP_ERROR, 401,401, -1, 0, 0, {ACT_ABORTHUP}},
{EV_TIMEOUT, 401,403, -1, 0, 0, {ACT_ABORTHUP}},
//FIXME is ;<digit>+ at end of non-CID response really impossible?
}
-/* This function will be called via task queue from the callback handler.
- * We received a modem response and have to handle it..
+/**
+ * gigaset_handle_modem_response() - process received modem response
+ * @cs: device descriptor structure.
+ *
+ * Called by asyncdata/isocdata if a block of data received from the
+ * device must be processed as a modem command response. The data is
+ * already in the cs structure.
*/
void gigaset_handle_modem_response(struct cardstate *cs)
{
if (bcs) {
/* B channel assigned: invoke hardware specific handler */
cs->ops->close_bchannel(bcs);
+ /* notify LL */
+ if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) {
+ bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL);
+ gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
+ }
} else {
/* no B channel assigned: just deallocate */
spin_lock_irqsave(&cs->lock, flags);
cs->gotfwver = -1;
dev_err(cs->dev, "could not read firmware version.\n");
break;
-#ifdef CONFIG_GIGASET_DEBUG
case ACT_ERROR:
- *p_genresp = 1;
- *p_resp_code = RSP_ERROR;
+ gig_dbg(DEBUG_ANY, "%s: ERROR response in ConState %d",
+ __func__, at_state->ConState);
+ cs->cur_at_seq = SEQ_NONE;
break;
+#ifdef CONFIG_GIGASET_DEBUG
case ACT_TEST:
{
static int count = 3; //2; //1;
return -ENODEV;
}
bcs = &cs->bcs[channel];
+
+ /* can only handle linear sk_buffs */
+ if (skb_linearize(skb) < 0) {
+ dev_err(cs->dev, "%s: skb_linearize failed\n", __func__);
+ return -ENOMEM;
+ }
len = skb->len;
gig_dbg(DEBUG_LLDATA,
return cs->ops->send_skb(bcs, skb);
}
+/**
+ * gigaset_skb_sent() - acknowledge sending an skb
+ * @bcs: B channel descriptor structure.
+ * @skb: sent data.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when the data in a
+ * skb has been successfully sent, for signalling completion to the LL.
+ */
void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
{
unsigned len;
return 0;
}
+/**
+ * gigaset_isdn_icall() - signal incoming call
+ * @at_state: connection state structure.
+ *
+ * Called by main module to notify the LL that an incoming call has been
+ * received. @at_state contains the parameters of the call.
+ *
+ * Return value: call disposition (ICALL_*)
+ */
int gigaset_isdn_icall(struct at_state_t *at_state)
{
struct cardstate *cs = at_state->cs;
tty_unregister_device(drv->tty, cs->minor_index);
}
+/**
+ * gigaset_if_receive() - pass a received block of data to the tty device
+ * @cs: device descriptor structure.
+ * @buffer: received data.
+ * @len: number of bytes received.
+ *
+ * Called by asyncdata/isocdata if a block of data received from the
+ * device must be sent to userspace through the ttyG* device.
+ */
void gigaset_if_receive(struct cardstate *cs,
unsigned char *buffer, size_t len)
{
return -EAGAIN;
}
- dump_bytes(DEBUG_STREAM, "snd data", in, count);
+ dump_bytes(DEBUG_STREAM_DUMP, "snd data", in, count);
/* bitstuff and checksum input data */
fcs = PPP_INITFCS;
/* put closing flag and repeat byte for flag idle */
isowbuf_putflag(iwb);
end = isowbuf_donewrite(iwb);
- dump_bytes(DEBUG_STREAM_DUMP, "isowbuf", iwb->data, end + 1);
return end;
}
}
gig_dbg(DEBUG_STREAM, "put %d bytes", count);
+ dump_bytes(DEBUG_STREAM_DUMP, "snd data", in, count);
+
write = iwb->write;
do {
c = bitrev8(*in++);
procskb->tail -= 2;
gig_dbg(DEBUG_ISO, "%s: good frame (%d octets)",
__func__, procskb->len);
- dump_bytes(DEBUG_STREAM,
+ dump_bytes(DEBUG_STREAM_DUMP,
"rcv data", procskb->data, procskb->len);
bcs->hw.bas->goodbytes += procskb->len;
gigaset_rcv_skb(procskb, bcs->cs, bcs);
dobytes--;
}
if (dobytes == 0) {
+ dump_bytes(DEBUG_STREAM_DUMP,
+ "rcv data", skb->data, skb->len);
gigaset_rcv_skb(skb, bcs->cs, bcs);
bcs->skb = skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN);
if (!skb) {
/* == data output ========================================================== */
-/* gigaset_send_skb
- * called by common.c to queue an skb for sending
- * and start transmission if necessary
- * parameters:
- * B Channel control structure
- * skb
- * return value:
- * number of bytes accepted for sending
- * (skb->len if ok, 0 if out of buffer space)
- * or error code (< 0, eg. -EINVAL)
+/**
+ * gigaset_isoc_send_skb() - queue an skb for sending
+ * @bcs: B channel descriptor structure.
+ * @skb: data to send.
+ *
+ * Called by i4l.c to queue an skb for sending, and start transmission if
+ * necessary.
+ *
+ * Return value:
+ * number of bytes accepted for sending (skb->len) if ok,
+ * error code < 0 (eg. -ENODEV) on error
*/
int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb)
{
depends on PCI
select MISDN_IPAC
select ISDN_HDLC
+ select ISDN_I4L
help
Enable support for Traverse Technologies NETJet PCI cards.
*
*/
+#include <linux/sched.h>
#include "hisax.h"
#include "isdnl1.h"
#include "isac.h"
*/
#include <linux/init.h>
+#include <linux/sched.h>
#include "hisax.h"
#include "hfc_2bds0.h"
#include "isdnl1.h"
#include "hfc_pci.h"
#include "isdnl1.h"
#include <linux/pci.h>
+#include <linux/sched.h>
#include <linux/interrupt.h>
static const char *hfcpci_revision = "$Revision: 1.48.2.4 $";
*
*/
+#include <linux/cred.h>
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
+#include <linux/sched.h>
#include <linux/smp_lock.h>
#include "hysdn_defs.h"
endif
config ISDN_HDLC
- tristate
- depends on HISAX_ST5481
+ tristate
select CRC_CCITT
select BITREVERSE
spin_lock_irqsave(&nd->queue_lock, flags);
lp = nd->queue; /* get lp on top of queue */
- spin_lock(&nd->queue->xmit_lock);
while (isdn_net_lp_busy(nd->queue)) {
- spin_unlock(&nd->queue->xmit_lock);
nd->queue = nd->queue->next;
if (nd->queue == lp) { /* not found -- should never happen */
lp = NULL;
goto errout;
}
- spin_lock(&nd->queue->xmit_lock);
}
lp = nd->queue;
nd->queue = nd->queue->next;
+ spin_unlock_irqrestore(&nd->queue_lock, flags);
+ spin_lock(&lp->xmit_lock);
local_bh_disable();
+ return lp;
errout:
spin_unlock_irqrestore(&nd->queue_lock, flags);
return lp;
}
static int data_sock_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int len)
+ char __user *optval, unsigned int len)
{
struct sock *sk = sock->sk;
int err = 0, opt = 0;
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include "includes.h"
#include "hardware.h"
#include "card.h"
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
depends on LEDS_CLASS && I2C
help
- This option enables support for LEDs connected to the National
- Semiconductor LP3944 Lighting Management Unit (LMU) also known as
- Fun Light Chip.
+ This option enables support for LEDs connected to the National
+ Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+ Fun Light Chip.
To compile this driver as a module, choose M here: the
module will be called leds-lp3944.
LED driver chips accessed via the I2C bus. Supported
devices include PCA9550, PCA9551, PCA9552, and PCA9553.
+config LEDS_WM831X_STATUS
+ tristate "LED support for status LEDs on WM831x PMICs"
+ depends on LEDS_CLASS && MFD_WM831X
+ help
+ This option enables support for the status LEDs of the WM831x
+ series of PMICs.
+
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
depends on LEDS_CLASS && MFD_WM8350
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
+obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
static void clevo_mail_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
+ i8042_lock_chip();
+
if (value == LED_OFF)
i8042_command(NULL, CLEVO_MAIL_LED_OFF);
else if (value <= LED_HALF)
else
i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
+ i8042_unlock_chip();
+
}
static int clevo_mail_led_blink(struct led_classdev *led_cdev,
{
int status = -EINVAL;
+ i8042_lock_chip();
+
if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) {
/* Special case: the leds subsystem requested us to
* chose one user friendly blinking of the LED, and
*delay_on, *delay_off);
}
+ i8042_unlock_chip();
+
return status;
}
.flags = LED_CORE_SUSPENDRESUME,
};
-static int __init clevo_mail_led_probe(struct platform_device *pdev)
+static int __devinit clevo_mail_led_probe(struct platform_device *pdev)
{
return led_classdev_register(&pdev->dev, &clevo_mail_led);
}
}
static struct led_classdev qube_front_led = {
- .name = "qube-front",
+ .name = "qube::front",
.brightness = LED_FULL,
.brightness_set = qube_front_led_set,
.default_trigger = "ide-disk",
}
static struct led_classdev raq_web_led = {
- .name = "raq-web",
+ .name = "raq::web",
.brightness_set = raq_web_led_set,
};
}
static struct led_classdev raq_power_off_led = {
- .name = "raq-power-off",
+ .name = "raq::power-off",
.brightness_set = raq_power_off_led_set,
.default_trigger = "power-off",
};
/* skip leds that aren't available */
if (!gpio_is_valid(template->gpio)) {
- printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n",
+ printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n",
template->gpio, template->name);
return 0;
}
#include <linux/workqueue.h>
#include <linux/leds-pca9532.h>
-static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END};
-I2C_CLIENT_INSMOD_1(pca9532);
-
#define PCA9532_REG_PSC(i) (0x2+(i)*2)
#define PCA9532_REG_PWM(i) (0x3+(i)*2)
#define PCA9532_REG_LS0 0x6
struct i2c_client *client;
struct pca9532_led leds[16];
struct mutex update_lock;
- struct input_dev *idev;
+ struct input_dev *idev;
struct work_struct work;
u8 pwm[2];
u8 psc[2];
static struct i2c_driver pca9532_driver = {
.driver = {
- .name = "pca9532",
+ .name = "pca9532",
},
- .probe = pca9532_probe,
+ .probe = pca9532_probe,
.remove = pca9532_remove,
.id_table = pca9532_id,
};
if (*delay_on == 0 && *delay_off == 0) {
/* led subsystem ask us for a blink rate */
- *delay_on = 1000;
+ *delay_on = 1000;
*delay_off = 1000;
}
if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
break;
case PCA9532_TYPE_LED:
led->state = pled->state;
- led->name = pled->name;
+ led->name = pled->name;
led->ldev.name = led->name;
led->ldev.brightness = LED_OFF;
led->ldev.brightness_set = pca9532_set_brightness;
data->idev->name = pled->name;
data->idev->phys = "i2c/pca9532";
data->idev->id.bustype = BUS_HOST;
- data->idev->id.vendor = 0x001f;
+ data->idev->id.vendor = 0x001f;
data->idev->id.product = 0x0001;
data->idev->id.version = 0x0100;
data->idev->evbit[0] = BIT_MASK(EV_SND);
--- /dev/null
+/*
+ * LED driver for WM831x status LEDs
+ *
+ * Copyright(C) 2009 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/status.h>
+
+
+struct wm831x_status {
+ struct led_classdev cdev;
+ struct wm831x *wm831x;
+ struct work_struct work;
+ struct mutex mutex;
+
+ spinlock_t value_lock;
+ int reg; /* Control register */
+ int reg_val; /* Control register value */
+
+ int blink;
+ int blink_time;
+ int blink_cyc;
+ int src;
+ enum led_brightness brightness;
+};
+
+#define to_wm831x_status(led_cdev) \
+ container_of(led_cdev, struct wm831x_status, cdev)
+
+static void wm831x_status_work(struct work_struct *work)
+{
+ struct wm831x_status *led = container_of(work, struct wm831x_status,
+ work);
+ unsigned long flags;
+
+ mutex_lock(&led->mutex);
+
+ led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK |
+ WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK);
+
+ spin_lock_irqsave(&led->value_lock, flags);
+
+ led->reg_val |= led->src << WM831X_LED_SRC_SHIFT;
+ if (led->blink) {
+ led->reg_val |= 2 << WM831X_LED_MODE_SHIFT;
+ led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT;
+ led->reg_val |= led->blink_cyc;
+ } else {
+ if (led->brightness != LED_OFF)
+ led->reg_val |= 1 << WM831X_LED_MODE_SHIFT;
+ }
+
+ spin_unlock_irqrestore(&led->value_lock, flags);
+
+ wm831x_reg_write(led->wm831x, led->reg, led->reg_val);
+
+ mutex_unlock(&led->mutex);
+}
+
+static void wm831x_status_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&led->value_lock, flags);
+ led->brightness = value;
+ if (value == LED_OFF)
+ led->blink = 0;
+ schedule_work(&led->work);
+ spin_unlock_irqrestore(&led->value_lock, flags);
+}
+
+static int wm831x_status_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ unsigned long flags;
+ int ret = 0;
+
+ /* Pick some defaults if we've not been given times */
+ if (*delay_on == 0 && *delay_off == 0) {
+ *delay_on = 250;
+ *delay_off = 250;
+ }
+
+ spin_lock_irqsave(&led->value_lock, flags);
+
+ /* We only have a limited selection of settings, see if we can
+ * support the configuration we're being given */
+ switch (*delay_on) {
+ case 1000:
+ led->blink_time = 0;
+ break;
+ case 250:
+ led->blink_time = 1;
+ break;
+ case 125:
+ led->blink_time = 2;
+ break;
+ case 62:
+ case 63:
+ /* Actually 62.5ms */
+ led->blink_time = 3;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ if (ret == 0) {
+ switch (*delay_off / *delay_on) {
+ case 1:
+ led->blink_cyc = 0;
+ break;
+ case 3:
+ led->blink_cyc = 1;
+ break;
+ case 4:
+ led->blink_cyc = 2;
+ break;
+ case 8:
+ led->blink_cyc = 3;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ }
+
+ if (ret == 0)
+ led->blink = 1;
+ else
+ led->blink = 0;
+
+ /* Always update; if we fail turn off blinking since we expect
+ * a software fallback. */
+ schedule_work(&led->work);
+
+ spin_unlock_irqrestore(&led->value_lock, flags);
+
+ return ret;
+}
+
+static const char *led_src_texts[] = {
+ "otp",
+ "power",
+ "charger",
+ "soft",
+};
+
+static ssize_t wm831x_status_src_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ int i;
+ ssize_t ret = 0;
+
+ mutex_lock(&led->mutex);
+
+ for (i = 0; i < ARRAY_SIZE(led_src_texts); i++)
+ if (i == led->src)
+ ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]);
+ else
+ ret += sprintf(&buf[ret], "%s ", led_src_texts[i]);
+
+ mutex_unlock(&led->mutex);
+
+ ret += sprintf(&buf[ret], "\n");
+
+ return ret;
+}
+
+static ssize_t wm831x_status_src_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct wm831x_status *led = to_wm831x_status(led_cdev);
+ char name[20];
+ int i;
+ size_t len;
+
+ name[sizeof(name) - 1] = '\0';
+ strncpy(name, buf, sizeof(name) - 1);
+ len = strlen(name);
+
+ if (len && name[len - 1] == '\n')
+ name[len - 1] = '\0';
+
+ for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) {
+ if (!strcmp(name, led_src_texts[i])) {
+ mutex_lock(&led->mutex);
+
+ led->src = i;
+ schedule_work(&led->work);
+
+ mutex_unlock(&led->mutex);
+ }
+ }
+
+ return size;
+}
+
+static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store);
+
+static int wm831x_status_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *chip_pdata;
+ struct wm831x_status_pdata pdata;
+ struct wm831x_status *drvdata;
+ struct resource *res;
+ int id = pdev->id % ARRAY_SIZE(chip_pdata->status);
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+ if (res == NULL) {
+ dev_err(&pdev->dev, "No I/O resource\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ drvdata = kzalloc(sizeof(struct wm831x_status), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+ dev_set_drvdata(&pdev->dev, drvdata);
+
+ drvdata->wm831x = wm831x;
+ drvdata->reg = res->start;
+
+ if (wm831x->dev->platform_data)
+ chip_pdata = wm831x->dev->platform_data;
+ else
+ chip_pdata = NULL;
+
+ memset(&pdata, 0, sizeof(pdata));
+ if (chip_pdata && chip_pdata->status[id])
+ memcpy(&pdata, chip_pdata->status[id], sizeof(pdata));
+ else
+ pdata.name = dev_name(&pdev->dev);
+
+ mutex_init(&drvdata->mutex);
+ INIT_WORK(&drvdata->work, wm831x_status_work);
+ spin_lock_init(&drvdata->value_lock);
+
+ /* We cache the configuration register and read startup values
+ * from it. */
+ drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg);
+
+ if (drvdata->reg_val & WM831X_LED_MODE_MASK)
+ drvdata->brightness = LED_FULL;
+ else
+ drvdata->brightness = LED_OFF;
+
+ /* Set a default source if configured, otherwise leave the
+ * current hardware setting.
+ */
+ if (pdata.default_src == WM831X_STATUS_PRESERVE) {
+ drvdata->src = drvdata->reg_val;
+ drvdata->src &= WM831X_LED_SRC_MASK;
+ drvdata->src >>= WM831X_LED_SRC_SHIFT;
+ } else {
+ drvdata->src = pdata.default_src - 1;
+ }
+
+ drvdata->cdev.name = pdata.name;
+ drvdata->cdev.default_trigger = pdata.default_trigger;
+ drvdata->cdev.brightness_set = wm831x_status_set;
+ drvdata->cdev.blink_set = wm831x_status_blink_set;
+
+ ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
+ goto err_led;
+ }
+
+ ret = device_create_file(drvdata->cdev.dev, &dev_attr_src);
+ if (ret != 0)
+ dev_err(&pdev->dev,
+ "No source control for LED: %d\n", ret);
+
+ return 0;
+
+err_led:
+ led_classdev_unregister(&drvdata->cdev);
+ kfree(drvdata);
+err:
+ return ret;
+}
+
+static int wm831x_status_remove(struct platform_device *pdev)
+{
+ struct wm831x_status *drvdata = platform_get_drvdata(pdev);
+
+ device_remove_file(drvdata->cdev.dev, &dev_attr_src);
+ led_classdev_unregister(&drvdata->cdev);
+ kfree(drvdata);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_status_driver = {
+ .driver = {
+ .name = "wm831x-status",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_status_probe,
+ .remove = wm831x_status_remove,
+};
+
+static int __devinit wm831x_status_init(void)
+{
+ return platform_driver_register(&wm831x_status_driver);
+}
+module_init(wm831x_status_init);
+
+static void wm831x_status_exit(void)
+{
+ platform_driver_unregister(&wm831x_status_driver);
+}
+module_exit(wm831x_status_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x status LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-status");
struct gpio_trig_data, work);
int tmp;
- if (!gpio_data->gpio)
- return;
-
- tmp = gpio_get_value(gpio_data->gpio);
- if (gpio_data->inverted)
- tmp = !tmp;
-
- if (tmp) {
- if (gpio_data->desired_brightness)
- led_set_brightness(gpio_data->led,
- gpio_data->desired_brightness);
- else
- led_set_brightness(gpio_data->led, LED_FULL);
- } else {
- led_set_brightness(gpio_data->led, LED_OFF);
- }
+ if (!gpio_data->gpio)
+ return;
+
+ tmp = gpio_get_value(gpio_data->gpio);
+ if (gpio_data->inverted)
+ tmp = !tmp;
+
+ if (tmp) {
+ if (gpio_data->desired_brightness)
+ led_set_brightness(gpio_data->led,
+ gpio_data->desired_brightness);
+ else
+ led_set_brightness(gpio_data->led, LED_FULL);
+ } else {
+ led_set_brightness(gpio_data->led, LED_OFF);
+ }
}
static ssize_t gpio_trig_brightness_show(struct device *dev,
#include <linux/uaccess.h>
#include <linux/interrupt.h>
#include <linux/module.h>
+#include <linux/sched.h>
#include "lg.h"
/* Allow Guests to use a non-128 (ie. non-Linux) syscall trap. */
* uses: reading and writing a character device called /dev/lguest. All the
* work happens in the read(), write() and close() routines:
*/
-static struct file_operations lguest_fops = {
+static const struct file_operations lguest_fops = {
.owner = THIS_MODULE,
.release = close,
.write = write,
return data;
}
+static struct i2c_driver thermostat_driver;
+
static int
attach_thermostat(struct i2c_adapter *adapter)
{
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
- list_add_tail(&client->detected, &client->driver->clients);
+ list_add_tail(&client->detected, &thermostat_driver.clients);
return 0;
}
},
};
+static struct i2c_driver therm_pm72_driver;
+
/*
* Utility function to create an i2c_client structure and
* attach it to one of u3 adapters
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
- list_add_tail(&clt->detected, &clt->driver->clients);
+ list_add_tail(&clt->detected, &therm_pm72_driver.clients);
return clt;
}
}
static struct led_classdev pmu_led = {
- .name = "pmu-front-led",
+ .name = "pmu-led::front",
#ifdef CONFIG_ADB_PMU_LED_IDE
.default_trigger = "ide-disk",
#endif
printk(KERN_ERR "via-pmu: can't map interrupt\n");
return -ENODEV;
}
- if (request_irq(irq, via_pmu_interrupt, 0, "VIA-PMU", (void *)0)) {
+ /* We set IRQF_TIMER because we don't want the interrupt to be disabled
+ * between the 2 passes of driver suspend, we control our own disabling
+ * for that one
+ */
+ if (request_irq(irq, via_pmu_interrupt, IRQF_TIMER, "VIA-PMU", (void *)0)) {
printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
return -ENODEV;
}
gpio_irq = irq_of_parse_and_map(gpio_node, 0);
if (gpio_irq != NO_IRQ) {
- if (request_irq(gpio_irq, gpio1_interrupt, 0,
+ if (request_irq(gpio_irq, gpio1_interrupt, IRQF_TIMER,
"GPIO1 ADB", (void *)0))
printk(KERN_ERR "pmu: can't get irq %d"
" (GPIO1)\n", gpio_irq);
#ifdef CONFIG_ADB
/* Send an ADB command */
-static int
-pmu_send_request(struct adb_request *req, int sync)
+static int pmu_send_request(struct adb_request *req, int sync)
{
int i, ret;
}
/* Enable/disable autopolling */
-static int
-pmu_adb_autopoll(int devs)
+static int __pmu_adb_autopoll(int devs)
{
struct adb_request req;
- if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
- return -ENXIO;
-
if (devs) {
- adb_dev_map = devs;
pmu_request(&req, NULL, 5, PMU_ADB_CMD, 0, 0x86,
adb_dev_map >> 8, adb_dev_map);
pmu_adb_flags = 2;
return 0;
}
+static int pmu_adb_autopoll(int devs)
+{
+ if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+ return -ENXIO;
+
+ adb_dev_map = devs;
+ return __pmu_adb_autopoll(devs);
+}
+
/* Reset the ADB bus */
-static int
-pmu_adb_reset_bus(void)
+static int pmu_adb_reset_bus(void)
{
struct adb_request req;
int save_autopoll = adb_dev_map;
return -ENXIO;
/* anyone got a better idea?? */
- pmu_adb_autopoll(0);
+ __pmu_adb_autopoll(0);
- req.nbytes = 5;
+ req.nbytes = 4;
req.done = NULL;
req.data[0] = PMU_ADB_CMD;
- req.data[1] = 0;
- req.data[2] = ADB_BUSRESET;
+ req.data[1] = ADB_BUSRESET;
+ req.data[2] = 0;
req.data[3] = 0;
req.data[4] = 0;
req.reply_len = 0;
pmu_wait_complete(&req);
if (save_autopoll != 0)
- pmu_adb_autopoll(save_autopoll);
+ __pmu_adb_autopoll(save_autopoll);
return 0;
}
return rc;
}
+static struct i2c_driver wf_lm75_driver;
+
static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
u8 addr, int ds1775,
const char *loc)
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
- list_add_tail(&client->detected, &client->driver->clients);
+ list_add_tail(&client->detected, &wf_lm75_driver.clients);
return client;
fail:
return NULL;
return rc;
}
+static struct i2c_driver wf_max6690_driver;
+
static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
u8 addr, const char *loc)
{
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
- list_add_tail(&client->detected, &client->driver->clients);
+ list_add_tail(&client->detected, &wf_max6690_driver.clients);
return client;
fail:
.owner = THIS_MODULE,
};
+static struct i2c_driver wf_sat_driver;
+
static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
{
struct i2c_board_info info;
* Let i2c-core delete that device on driver removal.
* This is safe because i2c-core holds the core_lock mutex for us.
*/
- list_add_tail(&client->detected, &client->driver->clients);
+ list_add_tail(&client->detected, &wf_sat_driver.clients);
}
static int wf_sat_probe(struct i2c_client *client,
select MD_RAID6_PQ
select ASYNC_MEMCPY
select ASYNC_XOR
+ select ASYNC_PQ
+ select ASYNC_RAID6_RECOV
---help---
A RAID-5 set of N drives with a capacity of C MB per drive provides
the capacity of C * (N - 1) MB, and protects against a failure
If unsure, say Y.
+config MULTICORE_RAID456
+ bool "RAID-4/RAID-5/RAID-6 Multicore processing (EXPERIMENTAL)"
+ depends on MD_RAID456
+ depends on SMP
+ depends on EXPERIMENTAL
+ ---help---
+ Enable the raid456 module to dispatch per-stripe raid operations to a
+ thread pool.
+
+ If unsure, say N.
+
config MD_RAID6_PQ
tristate
+config ASYNC_RAID6_TEST
+ tristate "Self test for hardware accelerated raid6 recovery"
+ depends on MD_RAID6_PQ
+ select ASYNC_RAID6_RECOV
+ ---help---
+ This is a one-shot self test that permutes through the
+ recovery of all the possible two disk failure scenarios for a
+ N-disk array. Recovery is performed with the asynchronous
+ raid6 recovery routines, and will optionally use an offload
+ engine if one is available.
+
+ If unsure, say N.
+
config MD_MULTIPATH
tristate "Multipath I/O support"
depends on BLK_DEV_MD
obj-$(CONFIG_DM_ZERO) += dm-zero.o
quiet_cmd_unroll = UNROLL $@
- cmd_unroll = $(PERL) $(srctree)/$(src)/unroll.pl $(UNROLL) \
+ cmd_unroll = $(AWK) -f$(srctree)/$(src)/unroll.awk -vN=$(UNROLL) \
< $< > $@ || ( rm -f $@ && exit 1 )
ifeq ($(CONFIG_ALTIVEC),y)
targets += raid6int1.c
$(obj)/raid6int1.c: UNROLL := 1
-$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int1.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int2.c
$(obj)/raid6int2.c: UNROLL := 2
-$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int2.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int4.c
$(obj)/raid6int4.c: UNROLL := 4
-$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int4.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int8.c
$(obj)/raid6int8.c: UNROLL := 8
-$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int8.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int16.c
$(obj)/raid6int16.c: UNROLL := 16
-$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int16.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
targets += raid6int32.c
$(obj)/raid6int32.c: UNROLL := 32
-$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.pl FORCE
+$(obj)/raid6int32.c: $(src)/raid6int.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec1.o += $(altivec_flags)
targets += raid6altivec1.c
$(obj)/raid6altivec1.c: UNROLL := 1
-$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+$(obj)/raid6altivec1.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec2.o += $(altivec_flags)
targets += raid6altivec2.c
$(obj)/raid6altivec2.c: UNROLL := 2
-$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+$(obj)/raid6altivec2.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec4.o += $(altivec_flags)
targets += raid6altivec4.c
$(obj)/raid6altivec4.c: UNROLL := 4
-$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+$(obj)/raid6altivec4.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
CFLAGS_raid6altivec8.o += $(altivec_flags)
targets += raid6altivec8.c
$(obj)/raid6altivec8.c: UNROLL := 8
-$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.pl FORCE
+$(obj)/raid6altivec8.c: $(src)/raid6altivec.uc $(src)/unroll.awk FORCE
$(call if_changed,unroll)
quiet_cmd_mktable = TABLE $@
* allocated while we're using it
*/
static int bitmap_checkpage(struct bitmap *bitmap, unsigned long page, int create)
+__releases(bitmap->lock)
+__acquires(bitmap->lock)
{
unsigned char *mappage;
return 0;
bad_alignment:
- rcu_read_unlock();
return -EINVAL;
}
static bitmap_counter_t *bitmap_get_counter(struct bitmap *bitmap,
sector_t offset, int *blocks,
int create)
+__releases(bitmap->lock)
+__acquires(bitmap->lock)
{
/* If 'create', we might release the lock and reclaim it.
* The lock must have been taken with interrupts enabled.
bitmap->offset = mddev->bitmap_offset;
if (file) {
get_file(file);
- do_sync_mapping_range(file->f_mapping, 0, LLONG_MAX,
- SYNC_FILE_RANGE_WAIT_BEFORE |
- SYNC_FILE_RANGE_WRITE |
- SYNC_FILE_RANGE_WAIT_AFTER);
+ /* As future accesses to this file will use bmap,
+ * and bypass the page cache, we must sync the file
+ * first.
+ */
+ vfs_fsync(file, file->f_dentry, 1);
}
/* read superblock from bitmap file (this sets bitmap->chunksize) */
err = bitmap_read_sb(bitmap);
}
EXPORT_SYMBOL(dm_exception_store_type_unregister);
-/*
- * Round a number up to the nearest 'size' boundary. size must
- * be a power of 2.
- */
-static ulong round_up(ulong n, ulong size)
-{
- size--;
- return (n + size) & ~size;
-}
-
static int set_chunk_size(struct dm_exception_store *store,
const char *chunk_size_arg, char **error)
{
char *value;
chunk_size_ulong = simple_strtoul(chunk_size_arg, &value, 10);
- if (*chunk_size_arg == '\0' || *value != '\0') {
+ if (*chunk_size_arg == '\0' || *value != '\0' ||
+ chunk_size_ulong > UINT_MAX) {
*error = "Invalid chunk size";
return -EINVAL;
}
return 0;
}
- /*
- * Chunk size must be multiple of page size. Silently
- * round up if it's not.
- */
- chunk_size_ulong = round_up(chunk_size_ulong, PAGE_SIZE >> 9);
-
- return dm_exception_store_set_chunk_size(store, chunk_size_ulong,
+ return dm_exception_store_set_chunk_size(store,
+ (unsigned) chunk_size_ulong,
error);
}
int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
- unsigned long chunk_size_ulong,
+ unsigned chunk_size,
char **error)
{
/* Check chunk_size is a power of 2 */
- if (!is_power_of_2(chunk_size_ulong)) {
+ if (!is_power_of_2(chunk_size)) {
*error = "Chunk size is not a power of 2";
return -EINVAL;
}
/* Validate the chunk size against the device block size */
- if (chunk_size_ulong % (bdev_logical_block_size(store->cow->bdev) >> 9)) {
+ if (chunk_size % (bdev_logical_block_size(store->cow->bdev) >> 9)) {
*error = "Chunk size is not a multiple of device blocksize";
return -EINVAL;
}
- if (chunk_size_ulong > INT_MAX >> SECTOR_SHIFT) {
+ if (chunk_size > INT_MAX >> SECTOR_SHIFT) {
*error = "Chunk size is too high";
return -EINVAL;
}
- store->chunk_size = chunk_size_ulong;
- store->chunk_mask = chunk_size_ulong - 1;
- store->chunk_shift = ffs(chunk_size_ulong) - 1;
+ store->chunk_size = chunk_size;
+ store->chunk_mask = chunk_size - 1;
+ store->chunk_shift = ffs(chunk_size) - 1;
return 0;
}
r = set_chunk_size(tmp_store, argv[2], &ti->error);
if (r)
- goto bad_cow;
+ goto bad_ctr;
r = type->ctr(tmp_store, 0, NULL);
if (r) {
struct dm_dev *cow;
/* Size of data blocks saved - must be a power of 2 */
- chunk_t chunk_size;
- chunk_t chunk_mask;
- chunk_t chunk_shift;
+ unsigned chunk_size;
+ unsigned chunk_mask;
+ unsigned chunk_shift;
void *context;
};
int dm_exception_store_type_unregister(struct dm_exception_store_type *type);
int dm_exception_store_set_chunk_size(struct dm_exception_store *store,
- unsigned long chunk_size_ulong,
+ unsigned chunk_size,
char **error);
int dm_exception_store_create(struct dm_target *ti, int argc, char **argv,
}
/* The ptr value is sufficient for local unique id */
- lc->luid = (uint64_t)lc;
+ lc->luid = (unsigned long)lc;
lc->ti = ti;
* This is the connector callback that delivers data
* that was sent from userspace.
*/
-static void cn_ulog_callback(void *data)
+static void cn_ulog_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
- struct cn_msg *msg = (struct cn_msg *)data;
struct dm_ulog_request *tfr = (struct dm_ulog_request *)(msg + 1);
+ if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN))
+ return;
+
spin_lock(&receiving_list_lock);
if (msg->len == 0)
fill_pkg(msg, NULL);
{
int r;
struct disk_header *dh;
- chunk_t chunk_size;
+ unsigned chunk_size;
int chunk_size_supplied = 1;
char *chunk_err;
/*
- * Use default chunk size (or hardsect_size, if larger) if none supplied
+ * Use default chunk size (or logical_block_size, if larger)
+ * if none supplied
*/
if (!ps->store->chunk_size) {
ps->store->chunk_size = max(DM_CHUNK_SIZE_DEFAULT_SECTORS,
return 0;
if (chunk_size_supplied)
- DMWARN("chunk size %llu in device metadata overrides "
- "table chunk size of %llu.",
- (unsigned long long)chunk_size,
- (unsigned long long)ps->store->chunk_size);
+ DMWARN("chunk size %u in device metadata overrides "
+ "table chunk size of %u.",
+ chunk_size, ps->store->chunk_size);
/* We had a bogus chunk_size. Fix stuff up. */
free_area(ps);
r = dm_exception_store_set_chunk_size(ps->store, chunk_size,
&chunk_err);
if (r) {
- DMERR("invalid on-disk chunk size %llu: %s.",
- (unsigned long long)chunk_size, chunk_err);
+ DMERR("invalid on-disk chunk size %u: %s.",
+ chunk_size, chunk_err);
return r;
}
*/
static int register_snapshot(struct dm_snapshot *snap)
{
+ struct dm_snapshot *l;
struct origin *o, *new_o;
struct block_device *bdev = snap->origin->bdev;
__insert_origin(o);
}
- list_add_tail(&snap->list, &o->snapshots);
+ /* Sort the list according to chunk size, largest-first smallest-last */
+ list_for_each_entry(l, &o->snapshots, list)
+ if (l->store->chunk_size < snap->store->chunk_size)
+ break;
+ list_add_tail(&snap->list, &l->list);
up_write(&_origins_lock);
return 0;
bio_list_init(&s->queued_bios);
INIT_WORK(&s->queued_bios_work, flush_queued_bios);
+ if (!s->store->chunk_size) {
+ ti->error = "Chunk size not set";
+ goto bad_load_and_register;
+ }
+
/* Add snapshot to the list of snapshots for this origin */
/* Exceptions aren't triggered till snapshot_resume() is called */
if (register_snapshot(s)) {
src.bdev = bdev;
src.sector = chunk_to_sector(s->store, pe->e.old_chunk);
- src.count = min(s->store->chunk_size, dev_size - src.sector);
+ src.count = min((sector_t)s->store->chunk_size, dev_size - src.sector);
dest.bdev = s->store->cow->bdev;
dest.sector = chunk_to_sector(s->store, pe->e.new_chunk);
unsigned sz = 0;
struct dm_snapshot *snap = ti->private;
+ down_write(&snap->lock);
+
switch (type) {
case STATUSTYPE_INFO:
if (!snap->valid)
break;
}
+ up_write(&snap->lock);
+
return 0;
}
struct dm_dev *dev = ti->private;
struct dm_snapshot *snap;
struct origin *o;
- chunk_t chunk_size = 0;
+ unsigned chunk_size = 0;
down_read(&_origins_lock);
o = __lookup_origin(dev->bdev);
r = dm_register_target(&snapshot_target);
if (r) {
DMERR("snapshot target register failed %d", r);
- return r;
+ goto bad_register_snapshot_target;
}
r = dm_register_target(&origin_target);
dm_unregister_target(&origin_target);
bad1:
dm_unregister_target(&snapshot_target);
+
+bad_register_snapshot_target:
+ dm_exception_store_exit();
return r;
}
atomic_t io_count;
struct bio *bio;
unsigned long start_time;
+ spinlock_t endio_lock;
};
/*
struct mapped_device *md = io->md;
/* Push-back supersedes any I/O errors */
- if (error && !(io->error > 0 && __noflush_suspending(md)))
- io->error = error;
+ if (unlikely(error)) {
+ spin_lock_irqsave(&io->endio_lock, flags);
+ if (!(io->error > 0 && __noflush_suspending(md)))
+ io->error = error;
+ spin_unlock_irqrestore(&io->endio_lock, flags);
+ }
if (atomic_dec_and_test(&io->io_count)) {
if (io->error == DM_ENDIO_REQUEUE) {
atomic_set(&ci.io->io_count, 1);
ci.io->bio = bio;
ci.io->md = md;
+ spin_lock_init(&ci.io->endio_lock);
ci.sector = bio->bi_sector;
ci.sector_count = bio_sectors(bio);
if (unlikely(bio_empty_barrier(bio)))
bad_bdev:
destroy_workqueue(md->wq);
bad_thread:
+ del_gendisk(md->disk);
put_disk(md->disk);
bad_disk:
blk_cleanup_queue(md->queue);
linear_conf_t *conf;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
+
rcu_read_lock();
conf = rcu_dereference(mddev->private);
mddev->pers->quiesce(mddev, 0);
}
+int mddev_congested(mddev_t *mddev, int bits)
+{
+ return mddev->suspended;
+}
+EXPORT_SYMBOL(mddev_congested);
+
static inline mddev_t *mddev_get(mddev_t *mddev)
{
rdev->desc_nr = i++;
rdev->raid_disk = rdev->desc_nr;
set_bit(In_sync, &rdev->flags);
- } else if (rdev->raid_disk >= mddev->raid_disks) {
+ } else if (rdev->raid_disk >= (mddev->raid_disks - min(0, mddev->delta_disks))) {
rdev->raid_disk = -1;
clear_bit(In_sync, &rdev->flags);
}
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync,
mddev,
- "%s_resync");
+ "resync");
if (!mddev->sync_thread) {
printk(KERN_ERR "%s: could not start resync"
" thread...\n",
static int get_array_info(mddev_t * mddev, void __user * arg)
{
mdu_array_info_t info;
- int nr,working,active,failed,spare;
+ int nr,working,insync,failed,spare;
mdk_rdev_t *rdev;
- nr=working=active=failed=spare=0;
+ nr=working=insync=failed=spare=0;
list_for_each_entry(rdev, &mddev->disks, same_set) {
nr++;
if (test_bit(Faulty, &rdev->flags))
else {
working++;
if (test_bit(In_sync, &rdev->flags))
- active++;
+ insync++;
else
spare++;
}
info.state = (1<<MD_SB_CLEAN);
if (mddev->bitmap && mddev->bitmap_offset)
info.state = (1<<MD_SB_BITMAP_PRESENT);
- info.active_disks = active;
+ info.active_disks = insync;
info.working_disks = working;
info.failed_disks = failed;
info.spare_disks = spare;
if (!list_empty(&mddev->disks)) {
mdk_rdev_t *rdev0 = list_entry(mddev->disks.next,
mdk_rdev_t, same_set);
- int err = super_types[mddev->major_version]
+ err = super_types[mddev->major_version]
.load_super(rdev, rdev0, mddev->minor_version);
if (err < 0) {
printk(KERN_WARNING
thread->run = run;
thread->mddev = mddev;
thread->timeout = MAX_SCHEDULE_TIMEOUT;
- thread->tsk = kthread_run(md_thread, thread, name, mdname(thread->mddev));
+ thread->tsk = kthread_run(md_thread, thread,
+ "%s_%s",
+ mdname(thread->mddev),
+ name ?: mddev->pers->name);
if (IS_ERR(thread->tsk)) {
kfree(thread);
return NULL;
}
mddev->sync_thread = md_register_thread(md_do_sync,
mddev,
- "%s_resync");
+ "resync");
if (!mddev->sync_thread) {
printk(KERN_ERR "%s: could not start resync"
" thread...\n",
extern void md_done_sync(mddev_t *mddev, int blocks, int ok);
extern void md_error(mddev_t *mddev, mdk_rdev_t *rdev);
+extern int mddev_congested(mddev_t *mddev, int bits);
extern void md_super_write(mddev_t *mddev, mdk_rdev_t *rdev,
sector_t sector, int size, struct page *page);
extern void md_super_wait(mddev_t *mddev);
}
mp_bh = mempool_alloc(conf->pool, GFP_NOIO);
- memset(mp_bh, 0, sizeof(*mp_bh));
mp_bh->master_bio = bio;
mp_bh->mddev = mddev;
multipath_conf_t *conf = mddev->private;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
+
rcu_read_lock();
for (i = 0; i < mddev->raid_disks ; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->multipaths[i].rdev);
}
{
- mddev->thread = md_register_thread(multipathd, mddev, "%s_multipath");
+ mddev->thread = md_register_thread(multipathd, mddev, NULL);
if (!mddev->thread) {
printk(KERN_ERR "multipath: couldn't allocate thread"
" for %s\n", mdname(mddev));
mdk_rdev_t **devlist = conf->devlist;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
+
for (i = 0; i < mddev->raid_disks && !ret ; i++) {
struct request_queue *q = bdev_get_queue(devlist[i]->bdev);
static int create_strip_zones(mddev_t *mddev)
{
- int i, c, j, err;
+ int i, c, err;
sector_t curr_zone_end, sectors;
mdk_rdev_t *smallest, *rdev1, *rdev2, *rdev, **dev;
struct strip_zone *zone;
/* now do the other zones */
for (i = 1; i < conf->nr_strip_zones; i++)
{
+ int j;
+
zone = conf->strip_zone + i;
dev = conf->devlist + i * mddev->raid_disks;
c = 0;
for (j=0; j<cnt; j++) {
- char b[BDEVNAME_SIZE];
rdev = conf->devlist[j];
printk(KERN_INFO "raid0: checking %s ...",
bdevname(rdev->bdev, b));
/* allocate a r1bio with room for raid_disks entries in the bios array */
r1_bio = kzalloc(size, gfp_flags);
- if (!r1_bio)
+ if (!r1_bio && pi->mddev)
unplug_slaves(pi->mddev);
return r1_bio;
conf_t *conf = mddev->private;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
+
rcu_read_lock();
for (i = 0; i < mddev->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
read_bio->bi_sector = r1_bio->sector + mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid1_end_read_request;
- read_bio->bi_rw = READ | do_sync;
+ read_bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
read_bio->bi_private = r1_bio;
generic_make_request(read_bio);
mbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[i].rdev->bdev;
mbio->bi_end_io = raid1_end_write_request;
- mbio->bi_rw = WRITE | do_barriers | do_sync;
+ mbio->bi_rw = WRITE | (do_barriers << BIO_RW_BARRIER) |
+ (do_sync << BIO_RW_SYNCIO);
mbio->bi_private = r1_bio;
if (behind_pages) {
conf->mirrors[i].rdev->data_offset;
bio->bi_bdev = conf->mirrors[i].rdev->bdev;
bio->bi_end_io = raid1_end_write_request;
- bio->bi_rw = WRITE | do_sync;
+ bio->bi_rw = WRITE |
+ (do_sync << BIO_RW_SYNCIO);
bio->bi_private = r1_bio;
r1_bio->bios[i] = bio;
generic_make_request(bio);
bio->bi_sector = r1_bio->sector + rdev->data_offset;
bio->bi_bdev = rdev->bdev;
bio->bi_end_io = raid1_end_read_request;
- bio->bi_rw = READ | do_sync;
+ bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
bio->bi_private = r1_bio;
unplug = 1;
generic_make_request(bio);
}
}
+ cond_resched();
}
if (unplug)
unplug_slaves(mddev);
conf->poolinfo = kmalloc(sizeof(*conf->poolinfo), GFP_KERNEL);
if (!conf->poolinfo)
goto out_no_mem;
- conf->poolinfo->mddev = mddev;
+ conf->poolinfo->mddev = NULL;
conf->poolinfo->raid_disks = mddev->raid_disks;
conf->r1bio_pool = mempool_create(NR_RAID1_BIOS, r1bio_pool_alloc,
r1bio_pool_free,
conf->poolinfo);
if (!conf->r1bio_pool)
goto out_no_mem;
+ conf->poolinfo->mddev = mddev;
spin_lock_init(&conf->device_lock);
mddev->queue->queue_lock = &conf->device_lock;
conf->last_used = j;
- mddev->thread = md_register_thread(raid1d, mddev, "%s_raid1");
+ mddev->thread = md_register_thread(raid1d, mddev, NULL);
if (!mddev->thread) {
printk(KERN_ERR
"raid1: couldn't allocate thread for %s\n",
/* allocate a r10bio with room for raid_disks entries in the bios array */
r10_bio = kzalloc(size, gfp_flags);
- if (!r10_bio)
+ if (!r10_bio && conf->mddev)
unplug_slaves(conf->mddev);
return r10_bio;
conf_t *conf = mddev->private;
int i, ret = 0;
+ if (mddev_congested(mddev, bits))
+ return 1;
rcu_read_lock();
for (i = 0; i < mddev->raid_disks && ret == 0; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->mirrors[i].rdev);
mirror->rdev->data_offset;
read_bio->bi_bdev = mirror->rdev->bdev;
read_bio->bi_end_io = raid10_end_read_request;
- read_bio->bi_rw = READ | do_sync;
+ read_bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
read_bio->bi_private = r10_bio;
generic_make_request(read_bio);
conf->mirrors[d].rdev->data_offset;
mbio->bi_bdev = conf->mirrors[d].rdev->bdev;
mbio->bi_end_io = raid10_end_write_request;
- mbio->bi_rw = WRITE | do_sync;
+ mbio->bi_rw = WRITE | (do_sync << BIO_RW_SYNCIO);
mbio->bi_private = r10_bio;
atomic_inc(&r10_bio->remaining);
bio->bi_sector = r10_bio->devs[r10_bio->read_slot].addr
+ rdev->data_offset;
bio->bi_bdev = rdev->bdev;
- bio->bi_rw = READ | do_sync;
+ bio->bi_rw = READ | (do_sync << BIO_RW_SYNCIO);
bio->bi_private = r10_bio;
bio->bi_end_io = raid10_end_read_request;
unplug = 1;
generic_make_request(bio);
}
}
+ cond_resched();
}
if (unplug)
unplug_slaves(mddev);
max_sync = RESYNC_PAGES << (PAGE_SHIFT-9);
if (!test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
/* recovery... the complicated one */
- int i, j, k;
+ int j, k;
r10_bio = NULL;
for (i=0 ; i<conf->raid_disks; i++)
if (!conf->tmppage)
goto out_free_conf;
- conf->mddev = mddev;
conf->raid_disks = mddev->raid_disks;
conf->near_copies = nc;
conf->far_copies = fc;
goto out_free_conf;
}
+ conf->mddev = mddev;
spin_lock_init(&conf->device_lock);
mddev->queue->queue_lock = &conf->device_lock;
}
- mddev->thread = md_register_thread(raid10d, mddev, "%s_raid10");
+ mddev->thread = md_register_thread(raid10d, mddev, NULL);
if (!mddev->thread) {
printk(KERN_ERR
"raid10: couldn't allocate thread for %s\n",
#include <linux/kthread.h>
#include <linux/raid/pq.h>
#include <linux/async_tx.h>
+#include <linux/async.h>
#include <linux/seq_file.h>
+#include <linux/cpu.h>
#include "md.h"
#include "raid5.h"
#include "bitmap.h"
static int raid6_idx_to_slot(int idx, struct stripe_head *sh,
int *count, int syndrome_disks)
{
- int slot;
+ int slot = *count;
+ if (sh->ddf_layout)
+ (*count)++;
if (idx == sh->pd_idx)
return syndrome_disks;
if (idx == sh->qd_idx)
return syndrome_disks + 1;
- slot = (*count)++;
+ if (!sh->ddf_layout)
+ (*count)++;
return slot;
}
struct page *bio_page;
int i;
int page_offset;
+ struct async_submit_ctl submit;
+ enum async_tx_flags flags = 0;
if (bio->bi_sector >= sector)
page_offset = (signed)(bio->bi_sector - sector) * 512;
else
page_offset = (signed)(sector - bio->bi_sector) * -512;
+
+ if (frombio)
+ flags |= ASYNC_TX_FENCE;
+ init_async_submit(&submit, flags, tx, NULL, NULL, NULL);
+
bio_for_each_segment(bvl, bio, i) {
int len = bio_iovec_idx(bio, i)->bv_len;
int clen;
bio_page = bio_iovec_idx(bio, i)->bv_page;
if (frombio)
tx = async_memcpy(page, bio_page, page_offset,
- b_offset, clen,
- ASYNC_TX_DEP_ACK,
- tx, NULL, NULL);
+ b_offset, clen, &submit);
else
tx = async_memcpy(bio_page, page, b_offset,
- page_offset, clen,
- ASYNC_TX_DEP_ACK,
- tx, NULL, NULL);
+ page_offset, clen, &submit);
}
+ /* chain the operations */
+ submit.depend_tx = tx;
+
if (clen < len) /* hit end of page */
break;
page_offset += len;
{
struct dma_async_tx_descriptor *tx = NULL;
raid5_conf_t *conf = sh->raid_conf;
+ struct async_submit_ctl submit;
int i;
pr_debug("%s: stripe %llu\n", __func__,
}
atomic_inc(&sh->count);
- async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
- ops_complete_biofill, sh);
+ init_async_submit(&submit, ASYNC_TX_ACK, tx, ops_complete_biofill, sh, NULL);
+ async_trigger_callback(&submit);
}
-static void ops_complete_compute5(void *stripe_head_ref)
+static void mark_target_uptodate(struct stripe_head *sh, int target)
{
- struct stripe_head *sh = stripe_head_ref;
- int target = sh->ops.target;
- struct r5dev *tgt = &sh->dev[target];
+ struct r5dev *tgt;
- pr_debug("%s: stripe %llu\n", __func__,
- (unsigned long long)sh->sector);
+ if (target < 0)
+ return;
+ tgt = &sh->dev[target];
set_bit(R5_UPTODATE, &tgt->flags);
BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
clear_bit(R5_Wantcompute, &tgt->flags);
+}
+
+static void ops_complete_compute(void *stripe_head_ref)
+{
+ struct stripe_head *sh = stripe_head_ref;
+
+ pr_debug("%s: stripe %llu\n", __func__,
+ (unsigned long long)sh->sector);
+
+ /* mark the computed target(s) as uptodate */
+ mark_target_uptodate(sh, sh->ops.target);
+ mark_target_uptodate(sh, sh->ops.target2);
+
clear_bit(STRIPE_COMPUTE_RUN, &sh->state);
if (sh->check_state == check_state_compute_run)
sh->check_state = check_state_compute_result;
release_stripe(sh);
}
-static struct dma_async_tx_descriptor *ops_run_compute5(struct stripe_head *sh)
+/* return a pointer to the address conversion region of the scribble buffer */
+static addr_conv_t *to_addr_conv(struct stripe_head *sh,
+ struct raid5_percpu *percpu)
+{
+ return percpu->scribble + sizeof(struct page *) * (sh->disks + 2);
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_compute5(struct stripe_head *sh, struct raid5_percpu *percpu)
{
- /* kernel stack size limits the total number of disks */
int disks = sh->disks;
- struct page *xor_srcs[disks];
+ struct page **xor_srcs = percpu->scribble;
int target = sh->ops.target;
struct r5dev *tgt = &sh->dev[target];
struct page *xor_dest = tgt->page;
int count = 0;
struct dma_async_tx_descriptor *tx;
+ struct async_submit_ctl submit;
int i;
pr_debug("%s: stripe %llu block: %d\n",
atomic_inc(&sh->count);
+ init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST, NULL,
+ ops_complete_compute, sh, to_addr_conv(sh, percpu));
if (unlikely(count == 1))
- tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
- 0, NULL, ops_complete_compute5, sh);
+ tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE, &submit);
else
- tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- ASYNC_TX_XOR_ZERO_DST, NULL,
- ops_complete_compute5, sh);
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, &submit);
return tx;
}
+/* set_syndrome_sources - populate source buffers for gen_syndrome
+ * @srcs - (struct page *) array of size sh->disks
+ * @sh - stripe_head to parse
+ *
+ * Populates srcs in proper layout order for the stripe and returns the
+ * 'count' of sources to be used in a call to async_gen_syndrome. The P
+ * destination buffer is recorded in srcs[count] and the Q destination
+ * is recorded in srcs[count+1]].
+ */
+static int set_syndrome_sources(struct page **srcs, struct stripe_head *sh)
+{
+ int disks = sh->disks;
+ int syndrome_disks = sh->ddf_layout ? disks : (disks - 2);
+ int d0_idx = raid6_d0(sh);
+ int count;
+ int i;
+
+ for (i = 0; i < disks; i++)
+ srcs[i] = NULL;
+
+ count = 0;
+ i = d0_idx;
+ do {
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
+ srcs[slot] = sh->dev[i].page;
+ i = raid6_next_disk(i, disks);
+ } while (i != d0_idx);
+
+ return syndrome_disks;
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_compute6_1(struct stripe_head *sh, struct raid5_percpu *percpu)
+{
+ int disks = sh->disks;
+ struct page **blocks = percpu->scribble;
+ int target;
+ int qd_idx = sh->qd_idx;
+ struct dma_async_tx_descriptor *tx;
+ struct async_submit_ctl submit;
+ struct r5dev *tgt;
+ struct page *dest;
+ int i;
+ int count;
+
+ if (sh->ops.target < 0)
+ target = sh->ops.target2;
+ else if (sh->ops.target2 < 0)
+ target = sh->ops.target;
+ else
+ /* we should only have one valid target */
+ BUG();
+ BUG_ON(target < 0);
+ pr_debug("%s: stripe %llu block: %d\n",
+ __func__, (unsigned long long)sh->sector, target);
+
+ tgt = &sh->dev[target];
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
+ dest = tgt->page;
+
+ atomic_inc(&sh->count);
+
+ if (target == qd_idx) {
+ count = set_syndrome_sources(blocks, sh);
+ blocks[count] = NULL; /* regenerating p is not necessary */
+ BUG_ON(blocks[count+1] != dest); /* q should already be set */
+ init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
+ ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ tx = async_gen_syndrome(blocks, 0, count+2, STRIPE_SIZE, &submit);
+ } else {
+ /* Compute any data- or p-drive using XOR */
+ count = 0;
+ for (i = disks; i-- ; ) {
+ if (i == target || i == qd_idx)
+ continue;
+ blocks[count++] = sh->dev[i].page;
+ }
+
+ init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST,
+ NULL, ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ tx = async_xor(dest, blocks, 0, count, STRIPE_SIZE, &submit);
+ }
+
+ return tx;
+}
+
+static struct dma_async_tx_descriptor *
+ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu)
+{
+ int i, count, disks = sh->disks;
+ int syndrome_disks = sh->ddf_layout ? disks : disks-2;
+ int d0_idx = raid6_d0(sh);
+ int faila = -1, failb = -1;
+ int target = sh->ops.target;
+ int target2 = sh->ops.target2;
+ struct r5dev *tgt = &sh->dev[target];
+ struct r5dev *tgt2 = &sh->dev[target2];
+ struct dma_async_tx_descriptor *tx;
+ struct page **blocks = percpu->scribble;
+ struct async_submit_ctl submit;
+
+ pr_debug("%s: stripe %llu block1: %d block2: %d\n",
+ __func__, (unsigned long long)sh->sector, target, target2);
+ BUG_ON(target < 0 || target2 < 0);
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
+ BUG_ON(!test_bit(R5_Wantcompute, &tgt2->flags));
+
+ /* we need to open-code set_syndrome_sources to handle the
+ * slot number conversion for 'faila' and 'failb'
+ */
+ for (i = 0; i < disks ; i++)
+ blocks[i] = NULL;
+ count = 0;
+ i = d0_idx;
+ do {
+ int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
+
+ blocks[slot] = sh->dev[i].page;
+
+ if (i == target)
+ faila = slot;
+ if (i == target2)
+ failb = slot;
+ i = raid6_next_disk(i, disks);
+ } while (i != d0_idx);
+
+ BUG_ON(faila == failb);
+ if (failb < faila)
+ swap(faila, failb);
+ pr_debug("%s: stripe: %llu faila: %d failb: %d\n",
+ __func__, (unsigned long long)sh->sector, faila, failb);
+
+ atomic_inc(&sh->count);
+
+ if (failb == syndrome_disks+1) {
+ /* Q disk is one of the missing disks */
+ if (faila == syndrome_disks) {
+ /* Missing P+Q, just recompute */
+ init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
+ ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ return async_gen_syndrome(blocks, 0, syndrome_disks+2,
+ STRIPE_SIZE, &submit);
+ } else {
+ struct page *dest;
+ int data_target;
+ int qd_idx = sh->qd_idx;
+
+ /* Missing D+Q: recompute D from P, then recompute Q */
+ if (target == qd_idx)
+ data_target = target2;
+ else
+ data_target = target;
+
+ count = 0;
+ for (i = disks; i-- ; ) {
+ if (i == data_target || i == qd_idx)
+ continue;
+ blocks[count++] = sh->dev[i].page;
+ }
+ dest = sh->dev[data_target].page;
+ init_async_submit(&submit,
+ ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST,
+ NULL, NULL, NULL,
+ to_addr_conv(sh, percpu));
+ tx = async_xor(dest, blocks, 0, count, STRIPE_SIZE,
+ &submit);
+
+ count = set_syndrome_sources(blocks, sh);
+ init_async_submit(&submit, ASYNC_TX_FENCE, tx,
+ ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ return async_gen_syndrome(blocks, 0, count+2,
+ STRIPE_SIZE, &submit);
+ }
+ } else {
+ init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
+ ops_complete_compute, sh,
+ to_addr_conv(sh, percpu));
+ if (failb == syndrome_disks) {
+ /* We're missing D+P. */
+ return async_raid6_datap_recov(syndrome_disks+2,
+ STRIPE_SIZE, faila,
+ blocks, &submit);
+ } else {
+ /* We're missing D+D. */
+ return async_raid6_2data_recov(syndrome_disks+2,
+ STRIPE_SIZE, faila, failb,
+ blocks, &submit);
+ }
+ }
+}
+
+
static void ops_complete_prexor(void *stripe_head_ref)
{
struct stripe_head *sh = stripe_head_ref;
}
static struct dma_async_tx_descriptor *
-ops_run_prexor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+ops_run_prexor(struct stripe_head *sh, struct raid5_percpu *percpu,
+ struct dma_async_tx_descriptor *tx)
{
- /* kernel stack size limits the total number of disks */
int disks = sh->disks;
- struct page *xor_srcs[disks];
+ struct page **xor_srcs = percpu->scribble;
int count = 0, pd_idx = sh->pd_idx, i;
+ struct async_submit_ctl submit;
/* existing parity data subtracted */
struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
xor_srcs[count++] = dev->page;
}
- tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- ASYNC_TX_DEP_ACK | ASYNC_TX_XOR_DROP_DST, tx,
- ops_complete_prexor, sh);
+ init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
+ ops_complete_prexor, sh, to_addr_conv(sh, percpu));
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, &submit);
return tx;
}
return tx;
}
-static void ops_complete_postxor(void *stripe_head_ref)
+static void ops_complete_reconstruct(void *stripe_head_ref)
{
struct stripe_head *sh = stripe_head_ref;
- int disks = sh->disks, i, pd_idx = sh->pd_idx;
+ int disks = sh->disks;
+ int pd_idx = sh->pd_idx;
+ int qd_idx = sh->qd_idx;
+ int i;
pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
- if (dev->written || i == pd_idx)
+
+ if (dev->written || i == pd_idx || i == qd_idx)
set_bit(R5_UPTODATE, &dev->flags);
}
}
static void
-ops_run_postxor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
+ops_run_reconstruct5(struct stripe_head *sh, struct raid5_percpu *percpu,
+ struct dma_async_tx_descriptor *tx)
{
- /* kernel stack size limits the total number of disks */
int disks = sh->disks;
- struct page *xor_srcs[disks];
-
+ struct page **xor_srcs = percpu->scribble;
+ struct async_submit_ctl submit;
int count = 0, pd_idx = sh->pd_idx, i;
struct page *xor_dest;
int prexor = 0;
* set ASYNC_TX_XOR_DROP_DST and ASYNC_TX_XOR_ZERO_DST
* for the synchronous xor case
*/
- flags = ASYNC_TX_DEP_ACK | ASYNC_TX_ACK |
+ flags = ASYNC_TX_ACK |
(prexor ? ASYNC_TX_XOR_DROP_DST : ASYNC_TX_XOR_ZERO_DST);
atomic_inc(&sh->count);
- if (unlikely(count == 1)) {
- flags &= ~(ASYNC_TX_XOR_DROP_DST | ASYNC_TX_XOR_ZERO_DST);
- tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE,
- flags, tx, ops_complete_postxor, sh);
- } else
- tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- flags, tx, ops_complete_postxor, sh);
+ init_async_submit(&submit, flags, tx, ops_complete_reconstruct, sh,
+ to_addr_conv(sh, percpu));
+ if (unlikely(count == 1))
+ tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE, &submit);
+ else
+ tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, &submit);
+}
+
+static void
+ops_run_reconstruct6(struct stripe_head *sh, struct raid5_percpu *percpu,
+ struct dma_async_tx_descriptor *tx)
+{
+ struct async_submit_ctl submit;
+ struct page **blocks = percpu->scribble;
+ int count;
+
+ pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector);
+
+ count = set_syndrome_sources(blocks, sh);
+
+ atomic_inc(&sh->count);
+
+ init_async_submit(&submit, ASYNC_TX_ACK, tx, ops_complete_reconstruct,
+ sh, to_addr_conv(sh, percpu));
+ async_gen_syndrome(blocks, 0, count+2, STRIPE_SIZE, &submit);
}
static void ops_complete_check(void *stripe_head_ref)
release_stripe(sh);
}
-static void ops_run_check(struct stripe_head *sh)
+static void ops_run_check_p(struct stripe_head *sh, struct raid5_percpu *percpu)
{
- /* kernel stack size limits the total number of disks */
int disks = sh->disks;
- struct page *xor_srcs[disks];
+ int pd_idx = sh->pd_idx;
+ int qd_idx = sh->qd_idx;
+ struct page *xor_dest;
+ struct page **xor_srcs = percpu->scribble;
struct dma_async_tx_descriptor *tx;
-
- int count = 0, pd_idx = sh->pd_idx, i;
- struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
+ struct async_submit_ctl submit;
+ int count;
+ int i;
pr_debug("%s: stripe %llu\n", __func__,
(unsigned long long)sh->sector);
+ count = 0;
+ xor_dest = sh->dev[pd_idx].page;
+ xor_srcs[count++] = xor_dest;
for (i = disks; i--; ) {
- struct r5dev *dev = &sh->dev[i];
- if (i != pd_idx)
- xor_srcs[count++] = dev->page;
+ if (i == pd_idx || i == qd_idx)
+ continue;
+ xor_srcs[count++] = sh->dev[i].page;
}
- tx = async_xor_zero_sum(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
- &sh->ops.zero_sum_result, 0, NULL, NULL, NULL);
+ init_async_submit(&submit, 0, NULL, NULL, NULL,
+ to_addr_conv(sh, percpu));
+ tx = async_xor_val(xor_dest, xor_srcs, 0, count, STRIPE_SIZE,
+ &sh->ops.zero_sum_result, &submit);
atomic_inc(&sh->count);
- tx = async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx,
- ops_complete_check, sh);
+ init_async_submit(&submit, ASYNC_TX_ACK, tx, ops_complete_check, sh, NULL);
+ tx = async_trigger_callback(&submit);
}
-static void raid5_run_ops(struct stripe_head *sh, unsigned long ops_request)
+static void ops_run_check_pq(struct stripe_head *sh, struct raid5_percpu *percpu, int checkp)
+{
+ struct page **srcs = percpu->scribble;
+ struct async_submit_ctl submit;
+ int count;
+
+ pr_debug("%s: stripe %llu checkp: %d\n", __func__,
+ (unsigned long long)sh->sector, checkp);
+
+ count = set_syndrome_sources(srcs, sh);
+ if (!checkp)
+ srcs[count] = NULL;
+
+ atomic_inc(&sh->count);
+ init_async_submit(&submit, ASYNC_TX_ACK, NULL, ops_complete_check,
+ sh, to_addr_conv(sh, percpu));
+ async_syndrome_val(srcs, 0, count+2, STRIPE_SIZE,
+ &sh->ops.zero_sum_result, percpu->spare_page, &submit);
+}
+
+static void __raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
{
int overlap_clear = 0, i, disks = sh->disks;
struct dma_async_tx_descriptor *tx = NULL;
+ raid5_conf_t *conf = sh->raid_conf;
+ int level = conf->level;
+ struct raid5_percpu *percpu;
+ unsigned long cpu;
+ cpu = get_cpu();
+ percpu = per_cpu_ptr(conf->percpu, cpu);
if (test_bit(STRIPE_OP_BIOFILL, &ops_request)) {
ops_run_biofill(sh);
overlap_clear++;
}
if (test_bit(STRIPE_OP_COMPUTE_BLK, &ops_request)) {
- tx = ops_run_compute5(sh);
- /* terminate the chain if postxor is not set to be run */
- if (tx && !test_bit(STRIPE_OP_POSTXOR, &ops_request))
+ if (level < 6)
+ tx = ops_run_compute5(sh, percpu);
+ else {
+ if (sh->ops.target2 < 0 || sh->ops.target < 0)
+ tx = ops_run_compute6_1(sh, percpu);
+ else
+ tx = ops_run_compute6_2(sh, percpu);
+ }
+ /* terminate the chain if reconstruct is not set to be run */
+ if (tx && !test_bit(STRIPE_OP_RECONSTRUCT, &ops_request))
async_tx_ack(tx);
}
if (test_bit(STRIPE_OP_PREXOR, &ops_request))
- tx = ops_run_prexor(sh, tx);
+ tx = ops_run_prexor(sh, percpu, tx);
if (test_bit(STRIPE_OP_BIODRAIN, &ops_request)) {
tx = ops_run_biodrain(sh, tx);
overlap_clear++;
}
- if (test_bit(STRIPE_OP_POSTXOR, &ops_request))
- ops_run_postxor(sh, tx);
+ if (test_bit(STRIPE_OP_RECONSTRUCT, &ops_request)) {
+ if (level < 6)
+ ops_run_reconstruct5(sh, percpu, tx);
+ else
+ ops_run_reconstruct6(sh, percpu, tx);
+ }
- if (test_bit(STRIPE_OP_CHECK, &ops_request))
- ops_run_check(sh);
+ if (test_bit(STRIPE_OP_CHECK, &ops_request)) {
+ if (sh->check_state == check_state_run)
+ ops_run_check_p(sh, percpu);
+ else if (sh->check_state == check_state_run_q)
+ ops_run_check_pq(sh, percpu, 0);
+ else if (sh->check_state == check_state_run_pq)
+ ops_run_check_pq(sh, percpu, 1);
+ else
+ BUG();
+ }
if (overlap_clear)
for (i = disks; i--; ) {
if (test_and_clear_bit(R5_Overlap, &dev->flags))
wake_up(&sh->raid_conf->wait_for_overlap);
}
+ put_cpu();
+}
+
+#ifdef CONFIG_MULTICORE_RAID456
+static void async_run_ops(void *param, async_cookie_t cookie)
+{
+ struct stripe_head *sh = param;
+ unsigned long ops_request = sh->ops.request;
+
+ clear_bit_unlock(STRIPE_OPS_REQ_PENDING, &sh->state);
+ wake_up(&sh->ops.wait_for_ops);
+
+ __raid_run_ops(sh, ops_request);
+ release_stripe(sh);
+}
+
+static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
+{
+ /* since handle_stripe can be called outside of raid5d context
+ * we need to ensure sh->ops.request is de-staged before another
+ * request arrives
+ */
+ wait_event(sh->ops.wait_for_ops,
+ !test_and_set_bit_lock(STRIPE_OPS_REQ_PENDING, &sh->state));
+ sh->ops.request = ops_request;
+
+ atomic_inc(&sh->count);
+ async_schedule(async_run_ops, sh);
}
+#else
+#define raid_run_ops __raid_run_ops
+#endif
static int grow_one_stripe(raid5_conf_t *conf)
{
struct stripe_head *sh;
+ int disks = max(conf->raid_disks, conf->previous_raid_disks);
sh = kmem_cache_alloc(conf->slab_cache, GFP_KERNEL);
if (!sh)
return 0;
- memset(sh, 0, sizeof(*sh) + (conf->raid_disks-1)*sizeof(struct r5dev));
+ memset(sh, 0, sizeof(*sh) + (disks-1)*sizeof(struct r5dev));
sh->raid_conf = conf;
spin_lock_init(&sh->lock);
+ #ifdef CONFIG_MULTICORE_RAID456
+ init_waitqueue_head(&sh->ops.wait_for_ops);
+ #endif
- if (grow_buffers(sh, conf->raid_disks)) {
- shrink_buffers(sh, conf->raid_disks);
+ if (grow_buffers(sh, disks)) {
+ shrink_buffers(sh, disks);
kmem_cache_free(conf->slab_cache, sh);
return 0;
}
- sh->disks = conf->raid_disks;
/* we just created an active stripe so... */
atomic_set(&sh->count, 1);
atomic_inc(&conf->active_stripes);
static int grow_stripes(raid5_conf_t *conf, int num)
{
struct kmem_cache *sc;
- int devs = conf->raid_disks;
+ int devs = max(conf->raid_disks, conf->previous_raid_disks);
sprintf(conf->cache_name[0],
"raid%d-%s", conf->level, mdname(conf->mddev));
return 0;
}
+/**
+ * scribble_len - return the required size of the scribble region
+ * @num - total number of disks in the array
+ *
+ * The size must be enough to contain:
+ * 1/ a struct page pointer for each device in the array +2
+ * 2/ room to convert each entry in (1) to its corresponding dma
+ * (dma_map_page()) or page (page_address()) address.
+ *
+ * Note: the +2 is for the destination buffers of the ddf/raid6 case where we
+ * calculate over all devices (not just the data blocks), using zeros in place
+ * of the P and Q blocks.
+ */
+static size_t scribble_len(int num)
+{
+ size_t len;
+
+ len = sizeof(struct page *) * (num+2) + sizeof(addr_conv_t) * (num+2);
+
+ return len;
+}
+
static int resize_stripes(raid5_conf_t *conf, int newsize)
{
/* Make all the stripes able to hold 'newsize' devices.
struct stripe_head *osh, *nsh;
LIST_HEAD(newstripes);
struct disk_info *ndisks;
+ unsigned long cpu;
int err;
struct kmem_cache *sc;
int i;
nsh->raid_conf = conf;
spin_lock_init(&nsh->lock);
+ #ifdef CONFIG_MULTICORE_RAID456
+ init_waitqueue_head(&nsh->ops.wait_for_ops);
+ #endif
list_add(&nsh->lru, &newstripes);
}
/* Step 3.
* At this point, we are holding all the stripes so the array
* is completely stalled, so now is a good time to resize
- * conf->disks.
+ * conf->disks and the scribble region
*/
ndisks = kzalloc(newsize * sizeof(struct disk_info), GFP_NOIO);
if (ndisks) {
} else
err = -ENOMEM;
+ get_online_cpus();
+ conf->scribble_len = scribble_len(newsize);
+ for_each_present_cpu(cpu) {
+ struct raid5_percpu *percpu;
+ void *scribble;
+
+ percpu = per_cpu_ptr(conf->percpu, cpu);
+ scribble = kmalloc(conf->scribble_len, GFP_NOIO);
+
+ if (scribble) {
+ kfree(percpu->scribble);
+ percpu->scribble = scribble;
+ } else {
+ err = -ENOMEM;
+ break;
+ }
+ }
+ put_online_cpus();
+
/* Step 4, return new stripes to service */
while(!list_empty(&newstripes)) {
nsh = list_entry(newstripes.next, struct stripe_head, lru);
list_del_init(&nsh->lru);
+
for (i=conf->raid_disks; i < newsize; i++)
if (nsh->dev[i].page == NULL) {
struct page *p = alloc_page(GFP_NOIO);
case ALGORITHM_PARITY_N:
break;
case ALGORITHM_ROTATING_N_CONTINUE:
+ /* Like left_symmetric, but P is before Q */
if (sh->pd_idx == 0)
i--; /* P D D D Q */
- else if (i > sh->pd_idx)
- i -= 2; /* D D Q P D */
+ else {
+ /* D D Q P D */
+ if (i < sh->pd_idx)
+ i += raid_disks;
+ i -= (sh->pd_idx + 1);
+ }
break;
case ALGORITHM_LEFT_ASYMMETRIC_6:
case ALGORITHM_RIGHT_ASYMMETRIC_6:
}
-
-/*
- * Copy data between a page in the stripe cache, and one or more bion
- * The page could align with the middle of the bio, or there could be
- * several bion, each with several bio_vecs, which cover part of the page
- * Multiple bion are linked together on bi_next. There may be extras
- * at the end of this list. We ignore them.
- */
-static void copy_data(int frombio, struct bio *bio,
- struct page *page,
- sector_t sector)
-{
- char *pa = page_address(page);
- struct bio_vec *bvl;
- int i;
- int page_offset;
-
- if (bio->bi_sector >= sector)
- page_offset = (signed)(bio->bi_sector - sector) * 512;
- else
- page_offset = (signed)(sector - bio->bi_sector) * -512;
- bio_for_each_segment(bvl, bio, i) {
- int len = bio_iovec_idx(bio,i)->bv_len;
- int clen;
- int b_offset = 0;
-
- if (page_offset < 0) {
- b_offset = -page_offset;
- page_offset += b_offset;
- len -= b_offset;
- }
-
- if (len > 0 && page_offset + len > STRIPE_SIZE)
- clen = STRIPE_SIZE - page_offset;
- else clen = len;
-
- if (clen > 0) {
- char *ba = __bio_kmap_atomic(bio, i, KM_USER0);
- if (frombio)
- memcpy(pa+page_offset, ba+b_offset, clen);
- else
- memcpy(ba+b_offset, pa+page_offset, clen);
- __bio_kunmap_atomic(ba, KM_USER0);
- }
- if (clen < len) /* hit end of page */
- break;
- page_offset += len;
- }
-}
-
-#define check_xor() do { \
- if (count == MAX_XOR_BLOCKS) { \
- xor_blocks(count, STRIPE_SIZE, dest, ptr);\
- count = 0; \
- } \
- } while(0)
-
-static void compute_parity6(struct stripe_head *sh, int method)
-{
- raid5_conf_t *conf = sh->raid_conf;
- int i, pd_idx, qd_idx, d0_idx, disks = sh->disks, count;
- int syndrome_disks = sh->ddf_layout ? disks : (disks - 2);
- struct bio *chosen;
- /**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[syndrome_disks+2];
-
- pd_idx = sh->pd_idx;
- qd_idx = sh->qd_idx;
- d0_idx = raid6_d0(sh);
-
- pr_debug("compute_parity, stripe %llu, method %d\n",
- (unsigned long long)sh->sector, method);
-
- switch(method) {
- case READ_MODIFY_WRITE:
- BUG(); /* READ_MODIFY_WRITE N/A for RAID-6 */
- case RECONSTRUCT_WRITE:
- for (i= disks; i-- ;)
- if ( i != pd_idx && i != qd_idx && sh->dev[i].towrite ) {
- chosen = sh->dev[i].towrite;
- sh->dev[i].towrite = NULL;
-
- if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
- wake_up(&conf->wait_for_overlap);
-
- BUG_ON(sh->dev[i].written);
- sh->dev[i].written = chosen;
- }
- break;
- case CHECK_PARITY:
- BUG(); /* Not implemented yet */
- }
-
- for (i = disks; i--;)
- if (sh->dev[i].written) {
- sector_t sector = sh->dev[i].sector;
- struct bio *wbi = sh->dev[i].written;
- while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) {
- copy_data(1, wbi, sh->dev[i].page, sector);
- wbi = r5_next_bio(wbi, sector);
- }
-
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(R5_UPTODATE, &sh->dev[i].flags);
- }
-
- /* Note that unlike RAID-5, the ordering of the disks matters greatly.*/
-
- for (i = 0; i < disks; i++)
- ptrs[i] = (void *)raid6_empty_zero_page;
-
- count = 0;
- i = d0_idx;
- do {
- int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
-
- ptrs[slot] = page_address(sh->dev[i].page);
- if (slot < syndrome_disks &&
- !test_bit(R5_UPTODATE, &sh->dev[i].flags)) {
- printk(KERN_ERR "block %d/%d not uptodate "
- "on parity calc\n", i, count);
- BUG();
- }
-
- i = raid6_next_disk(i, disks);
- } while (i != d0_idx);
- BUG_ON(count != syndrome_disks);
-
- raid6_call.gen_syndrome(syndrome_disks+2, STRIPE_SIZE, ptrs);
-
- switch(method) {
- case RECONSTRUCT_WRITE:
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_UPTODATE, &sh->dev[qd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
- set_bit(R5_LOCKED, &sh->dev[qd_idx].flags);
- break;
- case UPDATE_PARITY:
- set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
- set_bit(R5_UPTODATE, &sh->dev[qd_idx].flags);
- break;
- }
-}
-
-
-/* Compute one missing block */
-static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero)
-{
- int i, count, disks = sh->disks;
- void *ptr[MAX_XOR_BLOCKS], *dest, *p;
- int qd_idx = sh->qd_idx;
-
- pr_debug("compute_block_1, stripe %llu, idx %d\n",
- (unsigned long long)sh->sector, dd_idx);
-
- if ( dd_idx == qd_idx ) {
- /* We're actually computing the Q drive */
- compute_parity6(sh, UPDATE_PARITY);
- } else {
- dest = page_address(sh->dev[dd_idx].page);
- if (!nozero) memset(dest, 0, STRIPE_SIZE);
- count = 0;
- for (i = disks ; i--; ) {
- if (i == dd_idx || i == qd_idx)
- continue;
- p = page_address(sh->dev[i].page);
- if (test_bit(R5_UPTODATE, &sh->dev[i].flags))
- ptr[count++] = p;
- else
- printk("compute_block() %d, stripe %llu, %d"
- " not present\n", dd_idx,
- (unsigned long long)sh->sector, i);
-
- check_xor();
- }
- if (count)
- xor_blocks(count, STRIPE_SIZE, dest, ptr);
- if (!nozero) set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
- else clear_bit(R5_UPTODATE, &sh->dev[dd_idx].flags);
- }
-}
-
-/* Compute two missing blocks */
-static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2)
-{
- int i, count, disks = sh->disks;
- int syndrome_disks = sh->ddf_layout ? disks : disks-2;
- int d0_idx = raid6_d0(sh);
- int faila = -1, failb = -1;
- /**** FIX THIS: This could be very bad if disks is close to 256 ****/
- void *ptrs[syndrome_disks+2];
-
- for (i = 0; i < disks ; i++)
- ptrs[i] = (void *)raid6_empty_zero_page;
- count = 0;
- i = d0_idx;
- do {
- int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
-
- ptrs[slot] = page_address(sh->dev[i].page);
-
- if (i == dd_idx1)
- faila = slot;
- if (i == dd_idx2)
- failb = slot;
- i = raid6_next_disk(i, disks);
- } while (i != d0_idx);
- BUG_ON(count != syndrome_disks);
-
- BUG_ON(faila == failb);
- if ( failb < faila ) { int tmp = faila; faila = failb; failb = tmp; }
-
- pr_debug("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n",
- (unsigned long long)sh->sector, dd_idx1, dd_idx2,
- faila, failb);
-
- if (failb == syndrome_disks+1) {
- /* Q disk is one of the missing disks */
- if (faila == syndrome_disks) {
- /* Missing P+Q, just recompute */
- compute_parity6(sh, UPDATE_PARITY);
- return;
- } else {
- /* We're missing D+Q; recompute D from P */
- compute_block_1(sh, ((dd_idx1 == sh->qd_idx) ?
- dd_idx2 : dd_idx1),
- 0);
- compute_parity6(sh, UPDATE_PARITY); /* Is this necessary? */
- return;
- }
- }
-
- /* We're missing D+P or D+D; */
- if (failb == syndrome_disks) {
- /* We're missing D+P. */
- raid6_datap_recov(syndrome_disks+2, STRIPE_SIZE, faila, ptrs);
- } else {
- /* We're missing D+D. */
- raid6_2data_recov(syndrome_disks+2, STRIPE_SIZE, faila, failb,
- ptrs);
- }
-
- /* Both the above update both missing blocks */
- set_bit(R5_UPTODATE, &sh->dev[dd_idx1].flags);
- set_bit(R5_UPTODATE, &sh->dev[dd_idx2].flags);
-}
-
static void
-schedule_reconstruction5(struct stripe_head *sh, struct stripe_head_state *s,
+schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
int rcw, int expand)
{
int i, pd_idx = sh->pd_idx, disks = sh->disks;
+ raid5_conf_t *conf = sh->raid_conf;
+ int level = conf->level;
if (rcw) {
/* if we are not expanding this is a proper write request, and
} else
sh->reconstruct_state = reconstruct_state_run;
- set_bit(STRIPE_OP_POSTXOR, &s->ops_request);
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
s->locked++;
}
}
- if (s->locked + 1 == disks)
+ if (s->locked + conf->max_degraded == disks)
if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
- atomic_inc(&sh->raid_conf->pending_full_writes);
+ atomic_inc(&conf->pending_full_writes);
} else {
+ BUG_ON(level == 6);
BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
sh->reconstruct_state = reconstruct_state_prexor_drain_run;
set_bit(STRIPE_OP_PREXOR, &s->ops_request);
set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
- set_bit(STRIPE_OP_POSTXOR, &s->ops_request);
+ set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
}
}
- /* keep the parity disk locked while asynchronous operations
+ /* keep the parity disk(s) locked while asynchronous operations
* are in flight
*/
set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
s->locked++;
+ if (level == 6) {
+ int qd_idx = sh->qd_idx;
+ struct r5dev *dev = &sh->dev[qd_idx];
+
+ set_bit(R5_LOCKED, &dev->flags);
+ clear_bit(R5_UPTODATE, &dev->flags);
+ s->locked++;
+ }
+
pr_debug("%s: stripe %llu locked: %d ops_request: %lx\n",
__func__, (unsigned long long)sh->sector,
s->locked, s->ops_request);
static void end_reshape(raid5_conf_t *conf);
-static int page_is_zero(struct page *p)
-{
- char *a = page_address(p);
- return ((*(u32*)a) == 0 &&
- memcmp(a, a+4, STRIPE_SIZE-4)==0);
-}
-
static void stripe_set_idx(sector_t stripe, raid5_conf_t *conf, int previous,
struct stripe_head *sh)
{
set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
set_bit(R5_Wantcompute, &dev->flags);
sh->ops.target = disk_idx;
+ sh->ops.target2 = -1;
s->req_compute = 1;
/* Careful: from this point on 'uptodate' is in the eye
- * of raid5_run_ops which services 'compute' operations
+ * of raid_run_ops which services 'compute' operations
* before writes. R5_Wantcompute flags a block that will
* be R5_UPTODATE by the time it is needed for a
* subsequent operation.
set_bit(STRIPE_HANDLE, &sh->state);
}
-static void handle_stripe_fill6(struct stripe_head *sh,
- struct stripe_head_state *s, struct r6_state *r6s,
- int disks)
+/* fetch_block6 - checks the given member device to see if its data needs
+ * to be read or computed to satisfy a request.
+ *
+ * Returns 1 when no more member devices need to be checked, otherwise returns
+ * 0 to tell the loop in handle_stripe_fill6 to continue
+ */
+static int fetch_block6(struct stripe_head *sh, struct stripe_head_state *s,
+ struct r6_state *r6s, int disk_idx, int disks)
{
- int i;
- for (i = disks; i--; ) {
- struct r5dev *dev = &sh->dev[i];
- if (!test_bit(R5_LOCKED, &dev->flags) &&
- !test_bit(R5_UPTODATE, &dev->flags) &&
- (dev->toread || (dev->towrite &&
- !test_bit(R5_OVERWRITE, &dev->flags)) ||
- s->syncing || s->expanding ||
- (s->failed >= 1 &&
- (sh->dev[r6s->failed_num[0]].toread ||
- s->to_write)) ||
- (s->failed >= 2 &&
- (sh->dev[r6s->failed_num[1]].toread ||
- s->to_write)))) {
- /* we would like to get this block, possibly
- * by computing it, but we might not be able to
+ struct r5dev *dev = &sh->dev[disk_idx];
+ struct r5dev *fdev[2] = { &sh->dev[r6s->failed_num[0]],
+ &sh->dev[r6s->failed_num[1]] };
+
+ if (!test_bit(R5_LOCKED, &dev->flags) &&
+ !test_bit(R5_UPTODATE, &dev->flags) &&
+ (dev->toread ||
+ (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) ||
+ s->syncing || s->expanding ||
+ (s->failed >= 1 &&
+ (fdev[0]->toread || s->to_write)) ||
+ (s->failed >= 2 &&
+ (fdev[1]->toread || s->to_write)))) {
+ /* we would like to get this block, possibly by computing it,
+ * otherwise read it if the backing disk is insync
+ */
+ BUG_ON(test_bit(R5_Wantcompute, &dev->flags));
+ BUG_ON(test_bit(R5_Wantread, &dev->flags));
+ if ((s->uptodate == disks - 1) &&
+ (s->failed && (disk_idx == r6s->failed_num[0] ||
+ disk_idx == r6s->failed_num[1]))) {
+ /* have disk failed, and we're requested to fetch it;
+ * do compute it
*/
- if ((s->uptodate == disks - 1) &&
- (s->failed && (i == r6s->failed_num[0] ||
- i == r6s->failed_num[1]))) {
- pr_debug("Computing stripe %llu block %d\n",
- (unsigned long long)sh->sector, i);
- compute_block_1(sh, i, 0);
- s->uptodate++;
- } else if ( s->uptodate == disks-2 && s->failed >= 2 ) {
- /* Computing 2-failure is *very* expensive; only
- * do it if failed >= 2
- */
- int other;
- for (other = disks; other--; ) {
- if (other == i)
- continue;
- if (!test_bit(R5_UPTODATE,
- &sh->dev[other].flags))
- break;
- }
- BUG_ON(other < 0);
- pr_debug("Computing stripe %llu blocks %d,%d\n",
- (unsigned long long)sh->sector,
- i, other);
- compute_block_2(sh, i, other);
- s->uptodate += 2;
- } else if (test_bit(R5_Insync, &dev->flags)) {
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- s->locked++;
- pr_debug("Reading block %d (sync=%d)\n",
- i, s->syncing);
+ pr_debug("Computing stripe %llu block %d\n",
+ (unsigned long long)sh->sector, disk_idx);
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ set_bit(R5_Wantcompute, &dev->flags);
+ sh->ops.target = disk_idx;
+ sh->ops.target2 = -1; /* no 2nd target */
+ s->req_compute = 1;
+ s->uptodate++;
+ return 1;
+ } else if (s->uptodate == disks-2 && s->failed >= 2) {
+ /* Computing 2-failure is *very* expensive; only
+ * do it if failed >= 2
+ */
+ int other;
+ for (other = disks; other--; ) {
+ if (other == disk_idx)
+ continue;
+ if (!test_bit(R5_UPTODATE,
+ &sh->dev[other].flags))
+ break;
}
+ BUG_ON(other < 0);
+ pr_debug("Computing stripe %llu blocks %d,%d\n",
+ (unsigned long long)sh->sector,
+ disk_idx, other);
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ set_bit(R5_Wantcompute, &sh->dev[disk_idx].flags);
+ set_bit(R5_Wantcompute, &sh->dev[other].flags);
+ sh->ops.target = disk_idx;
+ sh->ops.target2 = other;
+ s->uptodate += 2;
+ s->req_compute = 1;
+ return 1;
+ } else if (test_bit(R5_Insync, &dev->flags)) {
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ pr_debug("Reading block %d (sync=%d)\n",
+ disk_idx, s->syncing);
}
}
+
+ return 0;
+}
+
+/**
+ * handle_stripe_fill6 - read or compute data to satisfy pending requests.
+ */
+static void handle_stripe_fill6(struct stripe_head *sh,
+ struct stripe_head_state *s, struct r6_state *r6s,
+ int disks)
+{
+ int i;
+
+ /* look for blocks to read/compute, skip this if a compute
+ * is already in flight, or if the stripe contents are in the
+ * midst of changing due to a write
+ */
+ if (!test_bit(STRIPE_COMPUTE_RUN, &sh->state) && !sh->check_state &&
+ !sh->reconstruct_state)
+ for (i = disks; i--; )
+ if (fetch_block6(sh, s, r6s, i, disks))
+ break;
set_bit(STRIPE_HANDLE, &sh->state);
}
*/
/* since handle_stripe can be called at any time we need to handle the
* case where a compute block operation has been submitted and then a
- * subsequent call wants to start a write request. raid5_run_ops only
- * handles the case where compute block and postxor are requested
+ * subsequent call wants to start a write request. raid_run_ops only
+ * handles the case where compute block and reconstruct are requested
* simultaneously. If this is not the case then new writes need to be
* held off until the compute completes.
*/
if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) &&
(s->locked == 0 && (rcw == 0 || rmw == 0) &&
!test_bit(STRIPE_BIT_DELAY, &sh->state)))
- schedule_reconstruction5(sh, s, rcw == 0, 0);
+ schedule_reconstruction(sh, s, rcw == 0, 0);
}
static void handle_stripe_dirtying6(raid5_conf_t *conf,
struct stripe_head *sh, struct stripe_head_state *s,
struct r6_state *r6s, int disks)
{
- int rcw = 0, must_compute = 0, pd_idx = sh->pd_idx, i;
+ int rcw = 0, pd_idx = sh->pd_idx, i;
int qd_idx = sh->qd_idx;
+
+ set_bit(STRIPE_HANDLE, &sh->state);
for (i = disks; i--; ) {
struct r5dev *dev = &sh->dev[i];
- /* Would I have to read this buffer for reconstruct_write */
- if (!test_bit(R5_OVERWRITE, &dev->flags)
- && i != pd_idx && i != qd_idx
- && (!test_bit(R5_LOCKED, &dev->flags)
- ) &&
- !test_bit(R5_UPTODATE, &dev->flags)) {
- if (test_bit(R5_Insync, &dev->flags)) rcw++;
- else {
- pr_debug("raid6: must_compute: "
- "disk %d flags=%#lx\n", i, dev->flags);
- must_compute++;
- }
- }
- }
- pr_debug("for sector %llu, rcw=%d, must_compute=%d\n",
- (unsigned long long)sh->sector, rcw, must_compute);
- set_bit(STRIPE_HANDLE, &sh->state);
-
- if (rcw > 0)
- /* want reconstruct write, but need to get some data */
- for (i = disks; i--; ) {
- struct r5dev *dev = &sh->dev[i];
- if (!test_bit(R5_OVERWRITE, &dev->flags)
- && !(s->failed == 0 && (i == pd_idx || i == qd_idx))
- && !test_bit(R5_LOCKED, &dev->flags) &&
- !test_bit(R5_UPTODATE, &dev->flags) &&
- test_bit(R5_Insync, &dev->flags)) {
- if (
- test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- pr_debug("Read_old stripe %llu "
- "block %d for Reconstruct\n",
- (unsigned long long)sh->sector, i);
- set_bit(R5_LOCKED, &dev->flags);
- set_bit(R5_Wantread, &dev->flags);
- s->locked++;
- } else {
- pr_debug("Request delayed stripe %llu "
- "block %d for Reconstruct\n",
- (unsigned long long)sh->sector, i);
- set_bit(STRIPE_DELAYED, &sh->state);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
+ /* check if we haven't enough data */
+ if (!test_bit(R5_OVERWRITE, &dev->flags) &&
+ i != pd_idx && i != qd_idx &&
+ !test_bit(R5_LOCKED, &dev->flags) &&
+ !(test_bit(R5_UPTODATE, &dev->flags) ||
+ test_bit(R5_Wantcompute, &dev->flags))) {
+ rcw++;
+ if (!test_bit(R5_Insync, &dev->flags))
+ continue; /* it's a failed drive */
+
+ if (
+ test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ pr_debug("Read_old stripe %llu "
+ "block %d for Reconstruct\n",
+ (unsigned long long)sh->sector, i);
+ set_bit(R5_LOCKED, &dev->flags);
+ set_bit(R5_Wantread, &dev->flags);
+ s->locked++;
+ } else {
+ pr_debug("Request delayed stripe %llu "
+ "block %d for Reconstruct\n",
+ (unsigned long long)sh->sector, i);
+ set_bit(STRIPE_DELAYED, &sh->state);
+ set_bit(STRIPE_HANDLE, &sh->state);
}
}
+ }
/* now if nothing is locked, and if we have enough data, we can start a
* write request
*/
- if (s->locked == 0 && rcw == 0 &&
+ if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) &&
+ s->locked == 0 && rcw == 0 &&
!test_bit(STRIPE_BIT_DELAY, &sh->state)) {
- if (must_compute > 0) {
- /* We have failed blocks and need to compute them */
- switch (s->failed) {
- case 0:
- BUG();
- case 1:
- compute_block_1(sh, r6s->failed_num[0], 0);
- break;
- case 2:
- compute_block_2(sh, r6s->failed_num[0],
- r6s->failed_num[1]);
- break;
- default: /* This request should have been failed? */
- BUG();
- }
- }
-
- pr_debug("Computing parity for stripe %llu\n",
- (unsigned long long)sh->sector);
- compute_parity6(sh, RECONSTRUCT_WRITE);
- /* now every locked buffer is ready to be written */
- for (i = disks; i--; )
- if (test_bit(R5_LOCKED, &sh->dev[i].flags)) {
- pr_debug("Writing stripe %llu block %d\n",
- (unsigned long long)sh->sector, i);
- s->locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
- }
- if (s->locked == disks)
- if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
- atomic_inc(&conf->pending_full_writes);
- /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */
- set_bit(STRIPE_INSYNC, &sh->state);
-
- if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
- atomic_dec(&conf->preread_active_stripes);
- if (atomic_read(&conf->preread_active_stripes) <
- IO_THRESHOLD)
- md_wakeup_thread(conf->mddev->thread);
- }
+ schedule_reconstruction(sh, s, 1, 0);
}
}
* we are done. Otherwise update the mismatch count and repair
* parity if !MD_RECOVERY_CHECK
*/
- if (sh->ops.zero_sum_result == 0)
+ if ((sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) == 0)
/* parity is correct (on disc,
* not in buffer any more)
*/
set_bit(R5_Wantcompute,
&sh->dev[sh->pd_idx].flags);
sh->ops.target = sh->pd_idx;
+ sh->ops.target2 = -1;
s->uptodate++;
}
}
static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh,
- struct stripe_head_state *s,
- struct r6_state *r6s, struct page *tmp_page,
- int disks)
+ struct stripe_head_state *s,
+ struct r6_state *r6s, int disks)
{
- int update_p = 0, update_q = 0;
- struct r5dev *dev;
int pd_idx = sh->pd_idx;
int qd_idx = sh->qd_idx;
+ struct r5dev *dev;
set_bit(STRIPE_HANDLE, &sh->state);
BUG_ON(s->failed > 2);
- BUG_ON(s->uptodate < disks);
+
/* Want to check and possibly repair P and Q.
* However there could be one 'failed' device, in which
* case we can only check one of them, possibly using the
* other to generate missing data
*/
- /* If !tmp_page, we cannot do the calculations,
- * but as we have set STRIPE_HANDLE, we will soon be called
- * by stripe_handle with a tmp_page - just wait until then.
- */
- if (tmp_page) {
+ switch (sh->check_state) {
+ case check_state_idle:
+ /* start a new check operation if there are < 2 failures */
if (s->failed == r6s->q_failed) {
- /* The only possible failed device holds 'Q', so it
+ /* The only possible failed device holds Q, so it
* makes sense to check P (If anything else were failed,
* we would have used P to recreate it).
*/
- compute_block_1(sh, pd_idx, 1);
- if (!page_is_zero(sh->dev[pd_idx].page)) {
- compute_block_1(sh, pd_idx, 0);
- update_p = 1;
- }
+ sh->check_state = check_state_run;
}
if (!r6s->q_failed && s->failed < 2) {
- /* q is not failed, and we didn't use it to generate
+ /* Q is not failed, and we didn't use it to generate
* anything, so it makes sense to check it
*/
- memcpy(page_address(tmp_page),
- page_address(sh->dev[qd_idx].page),
- STRIPE_SIZE);
- compute_parity6(sh, UPDATE_PARITY);
- if (memcmp(page_address(tmp_page),
- page_address(sh->dev[qd_idx].page),
- STRIPE_SIZE) != 0) {
- clear_bit(STRIPE_INSYNC, &sh->state);
- update_q = 1;
- }
+ if (sh->check_state == check_state_run)
+ sh->check_state = check_state_run_pq;
+ else
+ sh->check_state = check_state_run_q;
}
- if (update_p || update_q) {
- conf->mddev->resync_mismatches += STRIPE_SECTORS;
- if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
- /* don't try to repair!! */
- update_p = update_q = 0;
+
+ /* discard potentially stale zero_sum_result */
+ sh->ops.zero_sum_result = 0;
+
+ if (sh->check_state == check_state_run) {
+ /* async_xor_zero_sum destroys the contents of P */
+ clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
+ s->uptodate--;
+ }
+ if (sh->check_state >= check_state_run &&
+ sh->check_state <= check_state_run_pq) {
+ /* async_syndrome_zero_sum preserves P and Q, so
+ * no need to mark them !uptodate here
+ */
+ set_bit(STRIPE_OP_CHECK, &s->ops_request);
+ break;
}
+ /* we have 2-disk failure */
+ BUG_ON(s->failed != 2);
+ /* fall through */
+ case check_state_compute_result:
+ sh->check_state = check_state_idle;
+
+ /* check that a write has not made the stripe insync */
+ if (test_bit(STRIPE_INSYNC, &sh->state))
+ break;
+
/* now write out any block on a failed drive,
- * or P or Q if they need it
+ * or P or Q if they were recomputed
*/
-
+ BUG_ON(s->uptodate < disks - 1); /* We don't need Q to recover */
if (s->failed == 2) {
dev = &sh->dev[r6s->failed_num[1]];
s->locked++;
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantwrite, &dev->flags);
}
-
- if (update_p) {
+ if (sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) {
dev = &sh->dev[pd_idx];
s->locked++;
set_bit(R5_LOCKED, &dev->flags);
set_bit(R5_Wantwrite, &dev->flags);
}
- if (update_q) {
+ if (sh->ops.zero_sum_result & SUM_CHECK_Q_RESULT) {
dev = &sh->dev[qd_idx];
s->locked++;
set_bit(R5_LOCKED, &dev->flags);
clear_bit(STRIPE_DEGRADED, &sh->state);
set_bit(STRIPE_INSYNC, &sh->state);
+ break;
+ case check_state_run:
+ case check_state_run_q:
+ case check_state_run_pq:
+ break; /* we will be called again upon completion */
+ case check_state_check_result:
+ sh->check_state = check_state_idle;
+
+ /* handle a successful check operation, if parity is correct
+ * we are done. Otherwise update the mismatch count and repair
+ * parity if !MD_RECOVERY_CHECK
+ */
+ if (sh->ops.zero_sum_result == 0) {
+ /* both parities are correct */
+ if (!s->failed)
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ /* in contrast to the raid5 case we can validate
+ * parity, but still have a failure to write
+ * back
+ */
+ sh->check_state = check_state_compute_result;
+ /* Returning at this point means that we may go
+ * off and bring p and/or q uptodate again so
+ * we make sure to check zero_sum_result again
+ * to verify if p or q need writeback
+ */
+ }
+ } else {
+ conf->mddev->resync_mismatches += STRIPE_SECTORS;
+ if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery))
+ /* don't try to repair!! */
+ set_bit(STRIPE_INSYNC, &sh->state);
+ else {
+ int *target = &sh->ops.target;
+
+ sh->ops.target = -1;
+ sh->ops.target2 = -1;
+ sh->check_state = check_state_compute_run;
+ set_bit(STRIPE_COMPUTE_RUN, &sh->state);
+ set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
+ if (sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) {
+ set_bit(R5_Wantcompute,
+ &sh->dev[pd_idx].flags);
+ *target = pd_idx;
+ target = &sh->ops.target2;
+ s->uptodate++;
+ }
+ if (sh->ops.zero_sum_result & SUM_CHECK_Q_RESULT) {
+ set_bit(R5_Wantcompute,
+ &sh->dev[qd_idx].flags);
+ *target = qd_idx;
+ s->uptodate++;
+ }
+ }
+ }
+ break;
+ case check_state_compute_run:
+ break;
+ default:
+ printk(KERN_ERR "%s: unknown check_state: %d sector: %llu\n",
+ __func__, sh->check_state,
+ (unsigned long long) sh->sector);
+ BUG();
}
}
if (i != sh->pd_idx && i != sh->qd_idx) {
int dd_idx, j;
struct stripe_head *sh2;
+ struct async_submit_ctl submit;
sector_t bn = compute_blocknr(sh, i, 1);
sector_t s = raid5_compute_sector(conf, bn, 0,
}
/* place all the copies on one channel */
+ init_async_submit(&submit, 0, tx, NULL, NULL, NULL);
tx = async_memcpy(sh2->dev[dd_idx].page,
- sh->dev[i].page, 0, 0, STRIPE_SIZE,
- ASYNC_TX_DEP_ACK, tx, NULL, NULL);
+ sh->dev[i].page, 0, 0, STRIPE_SIZE,
+ &submit);
set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
*
*/
-static bool handle_stripe5(struct stripe_head *sh)
+static void handle_stripe5(struct stripe_head *sh)
{
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks, i;
rcu_read_lock();
for (i=disks; i--; ) {
mdk_rdev_t *rdev;
- struct r5dev *dev = &sh->dev[i];
+
+ dev = &sh->dev[i];
clear_bit(R5_Insync, &dev->flags);
pr_debug("check %d: state 0x%lx toread %p read %p write %p "
/* Need to write out all blocks after computing parity */
sh->disks = conf->raid_disks;
stripe_set_idx(sh->sector, conf, 0, sh);
- schedule_reconstruction5(sh, &s, 1, 1);
+ schedule_reconstruction(sh, &s, 1, 1);
} else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
if (s.ops_request)
- raid5_run_ops(sh, s.ops_request);
+ raid_run_ops(sh, s.ops_request);
ops_run_io(sh, &s);
return_io(return_bi);
-
- return blocked_rdev == NULL;
}
-static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page)
+static void handle_stripe6(struct stripe_head *sh)
{
raid5_conf_t *conf = sh->raid_conf;
int disks = sh->disks;
mdk_rdev_t *blocked_rdev = NULL;
pr_debug("handling stripe %llu, state=%#lx cnt=%d, "
- "pd_idx=%d, qd_idx=%d\n",
+ "pd_idx=%d, qd_idx=%d\n, check:%d, reconstruct:%d\n",
(unsigned long long)sh->sector, sh->state,
- atomic_read(&sh->count), pd_idx, qd_idx);
+ atomic_read(&sh->count), pd_idx, qd_idx,
+ sh->check_state, sh->reconstruct_state);
memset(&s, 0, sizeof(s));
spin_lock(&sh->lock);
pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
i, dev->flags, dev->toread, dev->towrite, dev->written);
- /* maybe we can reply to a read */
- if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) {
- struct bio *rbi, *rbi2;
- pr_debug("Return read for disc %d\n", i);
- spin_lock_irq(&conf->device_lock);
- rbi = dev->toread;
- dev->toread = NULL;
- if (test_and_clear_bit(R5_Overlap, &dev->flags))
- wake_up(&conf->wait_for_overlap);
- spin_unlock_irq(&conf->device_lock);
- while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) {
- copy_data(0, rbi, dev->page, dev->sector);
- rbi2 = r5_next_bio(rbi, dev->sector);
- spin_lock_irq(&conf->device_lock);
- if (!raid5_dec_bi_phys_segments(rbi)) {
- rbi->bi_next = return_bi;
- return_bi = rbi;
- }
- spin_unlock_irq(&conf->device_lock);
- rbi = rbi2;
- }
- }
+ /* maybe we can reply to a read
+ *
+ * new wantfill requests are only permitted while
+ * ops_complete_biofill is guaranteed to be inactive
+ */
+ if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread &&
+ !test_bit(STRIPE_BIOFILL_RUN, &sh->state))
+ set_bit(R5_Wantfill, &dev->flags);
/* now count some things */
if (test_bit(R5_LOCKED, &dev->flags)) s.locked++;
if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++;
+ if (test_bit(R5_Wantcompute, &dev->flags)) {
+ s.compute++;
+ BUG_ON(s.compute > 2);
+ }
-
- if (dev->toread)
+ if (test_bit(R5_Wantfill, &dev->flags)) {
+ s.to_fill++;
+ } else if (dev->toread)
s.to_read++;
if (dev->towrite) {
s.to_write++;
blocked_rdev = NULL;
}
+ if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
+ set_bit(STRIPE_OP_BIOFILL, &s.ops_request);
+ set_bit(STRIPE_BIOFILL_RUN, &sh->state);
+ }
+
pr_debug("locked=%d uptodate=%d to_read=%d"
" to_write=%d failed=%d failed_num=%d,%d\n",
s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
* or to load a block that is being partially written.
*/
if (s.to_read || s.non_overwrite || (s.to_write && s.failed) ||
- (s.syncing && (s.uptodate < disks)) || s.expanding)
+ (s.syncing && (s.uptodate + s.compute < disks)) || s.expanding)
handle_stripe_fill6(sh, &s, &r6s, disks);
- /* now to consider writing and what else, if anything should be read */
- if (s.to_write)
+ /* Now we check to see if any write operations have recently
+ * completed
+ */
+ if (sh->reconstruct_state == reconstruct_state_drain_result) {
+ int qd_idx = sh->qd_idx;
+
+ sh->reconstruct_state = reconstruct_state_idle;
+ /* All the 'written' buffers and the parity blocks are ready to
+ * be written back to disk
+ */
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags));
+ BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[qd_idx].flags));
+ for (i = disks; i--; ) {
+ dev = &sh->dev[i];
+ if (test_bit(R5_LOCKED, &dev->flags) &&
+ (i == sh->pd_idx || i == qd_idx ||
+ dev->written)) {
+ pr_debug("Writing block %d\n", i);
+ BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
+ set_bit(R5_Wantwrite, &dev->flags);
+ if (!test_bit(R5_Insync, &dev->flags) ||
+ ((i == sh->pd_idx || i == qd_idx) &&
+ s.failed == 0))
+ set_bit(STRIPE_INSYNC, &sh->state);
+ }
+ }
+ if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) {
+ atomic_dec(&conf->preread_active_stripes);
+ if (atomic_read(&conf->preread_active_stripes) <
+ IO_THRESHOLD)
+ md_wakeup_thread(conf->mddev->thread);
+ }
+ }
+
+ /* Now to consider new write requests and what else, if anything
+ * should be read. We do not handle new writes when:
+ * 1/ A 'write' operation (copy+gen_syndrome) is already in flight.
+ * 2/ A 'check' operation is in flight, as it may clobber the parity
+ * block.
+ */
+ if (s.to_write && !sh->reconstruct_state && !sh->check_state)
handle_stripe_dirtying6(conf, sh, &s, &r6s, disks);
/* maybe we need to check and possibly fix the parity for this stripe
* Any reads will already have been scheduled, so we just see if enough
- * data is available
+ * data is available. The parity check is held off while parity
+ * dependent operations are in flight.
*/
- if (s.syncing && s.locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state))
- handle_parity_checks6(conf, sh, &s, &r6s, tmp_page, disks);
+ if (sh->check_state ||
+ (s.syncing && s.locked == 0 &&
+ !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
+ !test_bit(STRIPE_INSYNC, &sh->state)))
+ handle_parity_checks6(conf, sh, &s, &r6s, disks);
if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) {
md_done_sync(conf->mddev, STRIPE_SECTORS,1);
set_bit(R5_Wantwrite, &dev->flags);
set_bit(R5_ReWrite, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
+ s.locked++;
} else {
/* let's read it back */
set_bit(R5_Wantread, &dev->flags);
set_bit(R5_LOCKED, &dev->flags);
+ s.locked++;
}
}
}
- if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
+ /* Finish reconstruct operations initiated by the expansion process */
+ if (sh->reconstruct_state == reconstruct_state_result) {
+ sh->reconstruct_state = reconstruct_state_idle;
+ clear_bit(STRIPE_EXPANDING, &sh->state);
+ for (i = conf->raid_disks; i--; ) {
+ set_bit(R5_Wantwrite, &sh->dev[i].flags);
+ set_bit(R5_LOCKED, &sh->dev[i].flags);
+ s.locked++;
+ }
+ }
+
+ if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
+ !sh->reconstruct_state) {
struct stripe_head *sh2
= get_active_stripe(conf, sh->sector, 1, 1, 1);
if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
/* Need to write out all blocks after computing P&Q */
sh->disks = conf->raid_disks;
stripe_set_idx(sh->sector, conf, 0, sh);
- compute_parity6(sh, RECONSTRUCT_WRITE);
- for (i = conf->raid_disks ; i-- ; ) {
- set_bit(R5_LOCKED, &sh->dev[i].flags);
- s.locked++;
- set_bit(R5_Wantwrite, &sh->dev[i].flags);
- }
- clear_bit(STRIPE_EXPANDING, &sh->state);
- } else if (s.expanded) {
+ schedule_reconstruction(sh, &s, 1, 1);
+ } else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
clear_bit(STRIPE_EXPAND_READY, &sh->state);
atomic_dec(&conf->reshape_stripes);
wake_up(&conf->wait_for_overlap);
if (unlikely(blocked_rdev))
md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
+ if (s.ops_request)
+ raid_run_ops(sh, s.ops_request);
+
ops_run_io(sh, &s);
return_io(return_bi);
-
- return blocked_rdev == NULL;
}
-/* returns true if the stripe was handled */
-static bool handle_stripe(struct stripe_head *sh, struct page *tmp_page)
+static void handle_stripe(struct stripe_head *sh)
{
if (sh->raid_conf->level == 6)
- return handle_stripe6(sh, tmp_page);
+ handle_stripe6(sh);
else
- return handle_stripe5(sh);
+ handle_stripe5(sh);
}
-
-
static void raid5_activate_delayed(raid5_conf_t *conf)
{
if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) {
{
raid5_conf_t *conf = mddev->private;
int i;
+ int devs = max(conf->raid_disks, conf->previous_raid_disks);
rcu_read_lock();
- for (i = 0; i < conf->raid_disks; i++) {
+ for (i = 0; i < devs; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) {
struct request_queue *r_queue = bdev_get_queue(rdev->bdev);
/* No difference between reads and writes. Just check
* how busy the stripe_cache is
*/
+
+ if (mddev_congested(mddev, bits))
+ return 1;
if (conf->inactive_blocked)
return 1;
if (conf->quiesce)
INIT_LIST_HEAD(&stripes);
for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) {
int j;
- int skipped = 0;
+ int skipped_disk = 0;
sh = get_active_stripe(conf, stripe_addr+i, 0, 0, 1);
set_bit(STRIPE_EXPANDING, &sh->state);
atomic_inc(&conf->reshape_stripes);
continue;
s = compute_blocknr(sh, j, 0);
if (s < raid5_size(mddev, 0, 0)) {
- skipped = 1;
+ skipped_disk = 1;
continue;
}
memset(page_address(sh->dev[j].page), 0, STRIPE_SIZE);
set_bit(R5_Expanded, &sh->dev[j].flags);
set_bit(R5_UPTODATE, &sh->dev[j].flags);
}
- if (!skipped) {
+ if (!skipped_disk) {
set_bit(STRIPE_EXPAND_READY, &sh->state);
set_bit(STRIPE_HANDLE, &sh->state);
}
clear_bit(STRIPE_INSYNC, &sh->state);
spin_unlock(&sh->lock);
- /* wait for any blocked device to be handled */
- while(unlikely(!handle_stripe(sh, NULL)))
- ;
+ handle_stripe(sh);
release_stripe(sh);
return STRIPE_SECTORS;
return handled;
}
- handle_stripe(sh, NULL);
+ handle_stripe(sh);
release_stripe(sh);
handled++;
}
}
-
/*
* This is our raid5 kernel thread.
*
spin_unlock_irq(&conf->device_lock);
handled++;
- handle_stripe(sh, conf->spare_page);
+ handle_stripe(sh);
release_stripe(sh);
+ cond_resched();
spin_lock_irq(&conf->device_lock);
}
if (!sectors)
sectors = mddev->dev_sectors;
- if (!raid_disks) {
+ if (!raid_disks)
/* size is defined by the smallest of previous and new size */
- if (conf->raid_disks < conf->previous_raid_disks)
- raid_disks = conf->raid_disks;
- else
- raid_disks = conf->previous_raid_disks;
- }
+ raid_disks = min(conf->raid_disks, conf->previous_raid_disks);
sectors &= ~((sector_t)mddev->chunk_sectors - 1);
sectors &= ~((sector_t)mddev->new_chunk_sectors - 1);
return sectors * (raid_disks - conf->max_degraded);
}
+static void raid5_free_percpu(raid5_conf_t *conf)
+{
+ struct raid5_percpu *percpu;
+ unsigned long cpu;
+
+ if (!conf->percpu)
+ return;
+
+ get_online_cpus();
+ for_each_possible_cpu(cpu) {
+ percpu = per_cpu_ptr(conf->percpu, cpu);
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ }
+#ifdef CONFIG_HOTPLUG_CPU
+ unregister_cpu_notifier(&conf->cpu_notify);
+#endif
+ put_online_cpus();
+
+ free_percpu(conf->percpu);
+}
+
static void free_conf(raid5_conf_t *conf)
{
shrink_stripes(conf);
- safe_put_page(conf->spare_page);
+ raid5_free_percpu(conf);
kfree(conf->disks);
kfree(conf->stripe_hashtbl);
kfree(conf);
}
+#ifdef CONFIG_HOTPLUG_CPU
+static int raid456_cpu_notify(struct notifier_block *nfb, unsigned long action,
+ void *hcpu)
+{
+ raid5_conf_t *conf = container_of(nfb, raid5_conf_t, cpu_notify);
+ long cpu = (long)hcpu;
+ struct raid5_percpu *percpu = per_cpu_ptr(conf->percpu, cpu);
+
+ switch (action) {
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
+ if (conf->level == 6 && !percpu->spare_page)
+ percpu->spare_page = alloc_page(GFP_KERNEL);
+ if (!percpu->scribble)
+ percpu->scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
+
+ if (!percpu->scribble ||
+ (conf->level == 6 && !percpu->spare_page)) {
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ pr_err("%s: failed memory allocation for cpu%ld\n",
+ __func__, cpu);
+ return NOTIFY_BAD;
+ }
+ break;
+ case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
+ safe_put_page(percpu->spare_page);
+ kfree(percpu->scribble);
+ percpu->spare_page = NULL;
+ percpu->scribble = NULL;
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+#endif
+
+static int raid5_alloc_percpu(raid5_conf_t *conf)
+{
+ unsigned long cpu;
+ struct page *spare_page;
+ struct raid5_percpu *allcpus;
+ void *scribble;
+ int err;
+
+ allcpus = alloc_percpu(struct raid5_percpu);
+ if (!allcpus)
+ return -ENOMEM;
+ conf->percpu = allcpus;
+
+ get_online_cpus();
+ err = 0;
+ for_each_present_cpu(cpu) {
+ if (conf->level == 6) {
+ spare_page = alloc_page(GFP_KERNEL);
+ if (!spare_page) {
+ err = -ENOMEM;
+ break;
+ }
+ per_cpu_ptr(conf->percpu, cpu)->spare_page = spare_page;
+ }
+ scribble = kmalloc(conf->scribble_len, GFP_KERNEL);
+ if (!scribble) {
+ err = -ENOMEM;
+ break;
+ }
+ per_cpu_ptr(conf->percpu, cpu)->scribble = scribble;
+ }
+#ifdef CONFIG_HOTPLUG_CPU
+ conf->cpu_notify.notifier_call = raid456_cpu_notify;
+ conf->cpu_notify.priority = 0;
+ if (err == 0)
+ err = register_cpu_notifier(&conf->cpu_notify);
+#endif
+ put_online_cpus();
+
+ return err;
+}
+
static raid5_conf_t *setup_conf(mddev_t *mddev)
{
raid5_conf_t *conf;
- int raid_disk, memory;
+ int raid_disk, memory, max_disks;
mdk_rdev_t *rdev;
struct disk_info *disk;
conf = kzalloc(sizeof(raid5_conf_t), GFP_KERNEL);
if (conf == NULL)
goto abort;
+ spin_lock_init(&conf->device_lock);
+ init_waitqueue_head(&conf->wait_for_stripe);
+ init_waitqueue_head(&conf->wait_for_overlap);
+ INIT_LIST_HEAD(&conf->handle_list);
+ INIT_LIST_HEAD(&conf->hold_list);
+ INIT_LIST_HEAD(&conf->delayed_list);
+ INIT_LIST_HEAD(&conf->bitmap_list);
+ INIT_LIST_HEAD(&conf->inactive_list);
+ atomic_set(&conf->active_stripes, 0);
+ atomic_set(&conf->preread_active_stripes, 0);
+ atomic_set(&conf->active_aligned_reads, 0);
+ conf->bypass_threshold = BYPASS_THRESHOLD;
conf->raid_disks = mddev->raid_disks;
if (mddev->reshape_position == MaxSector)
conf->previous_raid_disks = mddev->raid_disks;
else
conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
+ max_disks = max(conf->raid_disks, conf->previous_raid_disks);
+ conf->scribble_len = scribble_len(max_disks);
- conf->disks = kzalloc(conf->raid_disks * sizeof(struct disk_info),
+ conf->disks = kzalloc(max_disks * sizeof(struct disk_info),
GFP_KERNEL);
if (!conf->disks)
goto abort;
if ((conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL)) == NULL)
goto abort;
- if (mddev->new_level == 6) {
- conf->spare_page = alloc_page(GFP_KERNEL);
- if (!conf->spare_page)
- goto abort;
- }
- spin_lock_init(&conf->device_lock);
- init_waitqueue_head(&conf->wait_for_stripe);
- init_waitqueue_head(&conf->wait_for_overlap);
- INIT_LIST_HEAD(&conf->handle_list);
- INIT_LIST_HEAD(&conf->hold_list);
- INIT_LIST_HEAD(&conf->delayed_list);
- INIT_LIST_HEAD(&conf->bitmap_list);
- INIT_LIST_HEAD(&conf->inactive_list);
- atomic_set(&conf->active_stripes, 0);
- atomic_set(&conf->preread_active_stripes, 0);
- atomic_set(&conf->active_aligned_reads, 0);
- conf->bypass_threshold = BYPASS_THRESHOLD;
+ conf->level = mddev->new_level;
+ if (raid5_alloc_percpu(conf) != 0)
+ goto abort;
pr_debug("raid5: run(%s) called.\n", mdname(mddev));
list_for_each_entry(rdev, &mddev->disks, same_set) {
raid_disk = rdev->raid_disk;
- if (raid_disk >= conf->raid_disks
+ if (raid_disk >= max_disks
|| raid_disk < 0)
continue;
disk = conf->disks + raid_disk;
}
memory = conf->max_nr_stripes * (sizeof(struct stripe_head) +
- conf->raid_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
+ max_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
if (grow_stripes(conf, conf->max_nr_stripes)) {
printk(KERN_ERR
"raid5: couldn't allocate %dkB for buffers\n", memory);
printk(KERN_INFO "raid5: allocated %dkB for %s\n",
memory, mdname(mddev));
- conf->thread = md_register_thread(raid5d, mddev, "%s_raid5");
+ conf->thread = md_register_thread(raid5d, mddev, NULL);
if (!conf->thread) {
printk(KERN_ERR
"raid5: couldn't allocate thread for %s\n",
test_bit(In_sync, &rdev->flags))
working_disks++;
- mddev->degraded = conf->raid_disks - working_disks;
+ mddev->degraded = (max(conf->raid_disks, conf->previous_raid_disks)
+ - working_disks);
if (mddev->degraded > conf->max_degraded) {
printk(KERN_ERR "raid5: not enough operational devices for %s"
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
- "%s_reshape");
+ "reshape");
}
/* read-ahead size must cover two whole stripes, which is
set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
set_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
mddev->sync_thread = md_register_thread(md_do_sync, mddev,
- "%s_reshape");
+ "reshape");
if (!mddev->sync_thread) {
mddev->recovery = 0;
spin_lock_irq(&conf->device_lock);
#define _RAID5_H
#include <linux/raid/xor.h>
+#include <linux/dmaengine.h>
/*
*
*/
enum check_states {
check_state_idle = 0,
- check_state_run, /* parity check */
+ check_state_run, /* xor parity check */
+ check_state_run_q, /* q-parity check */
+ check_state_run_pq, /* pq dual parity check */
check_state_check_result,
check_state_compute_run, /* parity repair */
check_state_compute_result,
int disks; /* disks in stripe */
enum check_states check_state;
enum reconstruct_states reconstruct_state;
- /* stripe_operations
+ /**
+ * struct stripe_operations
* @target - STRIPE_OP_COMPUTE_BLK target
+ * @target2 - 2nd compute target in the raid6 case
+ * @zero_sum_result - P and Q verification flags
+ * @request - async service request flags for raid_run_ops
*/
struct stripe_operations {
- int target;
- u32 zero_sum_result;
+ int target, target2;
+ enum sum_check_flags zero_sum_result;
+ #ifdef CONFIG_MULTICORE_RAID456
+ unsigned long request;
+ wait_queue_head_t wait_for_ops;
+ #endif
} ops;
struct r5dev {
struct bio req;
#define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */
#define STRIPE_BIOFILL_RUN 14
#define STRIPE_COMPUTE_RUN 15
+#define STRIPE_OPS_REQ_PENDING 16
+
/*
* Operation request flags
*/
#define STRIPE_OP_COMPUTE_BLK 1
#define STRIPE_OP_PREXOR 2
#define STRIPE_OP_BIODRAIN 3
-#define STRIPE_OP_POSTXOR 4
+#define STRIPE_OP_RECONSTRUCT 4
#define STRIPE_OP_CHECK 5
/*
* (fresh device added).
* Cleared when a sync completes.
*/
-
- struct page *spare_page; /* Used when checking P/Q in raid6 */
+ /* per cpu variables */
+ struct raid5_percpu {
+ struct page *spare_page; /* Used when checking P/Q in raid6 */
+ void *scribble; /* space for constructing buffer
+ * lists and performing address
+ * conversions
+ */
+ } *percpu;
+ size_t scribble_len; /* size of scribble region must be
+ * associated with conf to handle
+ * cpu hotplug while reshaping
+ */
+#ifdef CONFIG_HOTPLUG_CPU
+ struct notifier_block cpu_notify;
+#endif
/*
* Free stripes pool
{
return (layout >= 0 && layout <= 5)
||
- (layout == 8 || layout == 10)
+ (layout >= 8 && layout <= 10)
||
(layout >= 16 && layout <= 20);
}
*
* $#-way unrolled portable integer math RAID-6 instruction set
*
- * This file is postprocessed using unroll.pl
+ * This file is postprocessed using unroll.awk
*
* <benh> hpa: in process,
* you can just "steal" the vec unit with enable_kernel_altivec() (but
*
* $#-way unrolled portable integer math RAID-6 instruction set
*
- * This file is postprocessed using unroll.pl
+ * This file is postprocessed using unroll.awk
*/
#include <linux/raid/pq.h>
OPTFLAGS = -O2 # Adjust as desired
CFLAGS = -I.. -I ../../../include -g $(OPTFLAGS)
LD = ld
-PERL = perl
+AWK = awk
AR = ar
RANLIB = ranlib
raid6test: test.c raid6.a
$(CC) $(CFLAGS) -o raid6test $^
-raid6altivec1.c: raid6altivec.uc ../unroll.pl
- $(PERL) ../unroll.pl 1 < raid6altivec.uc > $@
+raid6altivec1.c: raid6altivec.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=1 < raid6altivec.uc > $@
-raid6altivec2.c: raid6altivec.uc ../unroll.pl
- $(PERL) ../unroll.pl 2 < raid6altivec.uc > $@
+raid6altivec2.c: raid6altivec.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=2 < raid6altivec.uc > $@
-raid6altivec4.c: raid6altivec.uc ../unroll.pl
- $(PERL) ../unroll.pl 4 < raid6altivec.uc > $@
+raid6altivec4.c: raid6altivec.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=4 < raid6altivec.uc > $@
-raid6altivec8.c: raid6altivec.uc ../unroll.pl
- $(PERL) ../unroll.pl 8 < raid6altivec.uc > $@
+raid6altivec8.c: raid6altivec.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=8 < raid6altivec.uc > $@
-raid6int1.c: raid6int.uc ../unroll.pl
- $(PERL) ../unroll.pl 1 < raid6int.uc > $@
+raid6int1.c: raid6int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=1 < raid6int.uc > $@
-raid6int2.c: raid6int.uc ../unroll.pl
- $(PERL) ../unroll.pl 2 < raid6int.uc > $@
+raid6int2.c: raid6int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=2 < raid6int.uc > $@
-raid6int4.c: raid6int.uc ../unroll.pl
- $(PERL) ../unroll.pl 4 < raid6int.uc > $@
+raid6int4.c: raid6int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=4 < raid6int.uc > $@
-raid6int8.c: raid6int.uc ../unroll.pl
- $(PERL) ../unroll.pl 8 < raid6int.uc > $@
+raid6int8.c: raid6int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=8 < raid6int.uc > $@
-raid6int16.c: raid6int.uc ../unroll.pl
- $(PERL) ../unroll.pl 16 < raid6int.uc > $@
+raid6int16.c: raid6int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=16 < raid6int.uc > $@
-raid6int32.c: raid6int.uc ../unroll.pl
- $(PERL) ../unroll.pl 32 < raid6int.uc > $@
+raid6int32.c: raid6int.uc ../unroll.awk
+ $(AWK) ../unroll.awk -vN=32 < raid6int.uc > $@
raid6tables.c: mktables
./mktables > raid6tables.c
--- /dev/null
+
+# This filter requires one command line option of form -vN=n
+# where n must be a decimal number.
+#
+# Repeat each input line containing $$ n times, replacing $$ with 0...n-1.
+# Replace each $# with n, and each $* with a single $.
+
+BEGIN {
+ n = N + 0
+}
+{
+ if (/\$\$/) { rep = n } else { rep = 1 }
+ for (i = 0; i < rep; ++i) {
+ tmp = $0
+ gsub(/\$\$/, i, tmp)
+ gsub(/\$\#/, n, tmp)
+ gsub(/\$\*/, "$", tmp)
+ print tmp
+ }
+}
+++ /dev/null
-#!/usr/bin/perl
-#
-# Take a piece of C code and for each line which contains the sequence $$
-# repeat n times with $ replaced by 0...n-1; the sequence $# is replaced
-# by the unrolling factor, and $* with a single $
-#
-
-($n) = @ARGV;
-$n += 0;
-
-while ( defined($line = <STDIN>) ) {
- if ( $line =~ /\$\$/ ) {
- $rep = $n;
- } else {
- $rep = 1;
- }
- for ( $i = 0 ; $i < $rep ; $i++ ) {
- $tmp = $line;
- $tmp =~ s/\$\$/$i/g;
- $tmp =~ s/\$\#/$n/g;
- $tmp =~ s/\$\*/\$/g;
- print $tmp;
- }
-}
*
*/
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
return mask;
}
-static struct file_operations dvb_dvr_fops = {
+static const struct file_operations dvb_dvr_fops = {
.owner = THIS_MODULE,
.read = dvb_dvr_read,
.write = dvb_dvr_write,
*
*/
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <asm/uaccess.h>
#include <linux/crc32.h>
#include <linux/mutex.h>
+#include <linux/sched.h>
#include "dvb_demux.h"
#include "dvb_net.h"
#define DVB_MAJOR 212
#if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0
-#define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
+ #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS
#else
-#warning invalid CONFIG_DVB_MAX_ADAPTERS value
-#define DVB_MAX_ADAPTERS 8
+ #define DVB_MAX_ADAPTERS 8
#endif
#define DVB_UNSET (-1)
select DVB_DIB3000MC if !DVB_FE_CUSTOMISE
select DVB_S5H1411 if !DVB_FE_CUSTOMISE
select DVB_LGDT3305 if !DVB_FE_CUSTOMISE
- select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
+ select DVB_TUNER_DIB0070
select MEDIA_TUNER_MT2060 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MT2266 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE
return POLLIN;
}
-static struct file_operations fdtv_ca_fops = {
+static const struct file_operations fdtv_ca_fops = {
.owner = THIS_MODULE,
.ioctl = dvb_generic_ioctl,
.open = dvb_generic_open,
#include <linux/videodev2.h> /* V4L2 API defs */
#include <linux/param.h>
#include <linux/pnp.h>
+#include <linux/sched.h>
#include <linux/io.h> /* outb, outb_p */
#include <media/v4l2-device.h>
#include <media/v4l2-ioctl.h>
mutex_unlock(&sbuf->cam->s_mutex);
}
-static struct vm_operations_struct cafe_v4l_vm_ops = {
+static const struct vm_operations_struct cafe_v4l_vm_ops = {
.open = cafe_v4l_vm_open,
.close = cafe_v4l_vm_close
};
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/vmalloc.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/ctype.h>
}
-static struct vm_operations_struct et61x251_vm_ops = {
+static const struct vm_operations_struct et61x251_vm_ops = {
.open = et61x251_vm_open,
.close = et61x251_vm_close,
};
frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_MAPPED;
}
-static struct vm_operations_struct gspca_vm_ops = {
+static const struct vm_operations_struct gspca_vm_ops = {
.open = gspca_vm_open,
.close = gspca_vm_close,
};
*/
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/sched.h>
#include <linux/init.h>
#include <linux/videodev.h>
#include <media/v4l2-common.h>
meye.vma_use_count[idx]--;
}
-static struct vm_operations_struct meye_vm_ops = {
+static const struct vm_operations_struct meye_vm_ops = {
.open = meye_vm_open,
.close = meye_vm_close,
};
goto out;
}
- if (debug & DBGLVL_API)
+ if (saa_debug & DBGLVL_API)
saa7164_dumphex16(dev, buf, (buflen/16)*16);
saa7164_api_dump_subdevs(dev, buf, buflen);
dprintk(DBGLVL_API, "%s() len = %d bytes\n", __func__, len);
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, 2 * 16);
ret = saa7164_cmd_send(bus->dev, unitid, GET_CUR,
if (ret != SAA_OK)
printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
else {
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, sizeof(buf));
memcpy(data, (buf + 2 * sizeof(u32) + reglen), datalen);
}
*((u32 *)(buf + 1 * sizeof(u32))) = datalen - reglen;
memcpy((buf + 2 * sizeof(u32)), data, datalen);
- if (debug & DBGLVL_I2C)
+ if (saa_debug & DBGLVL_I2C)
saa7164_dumphex16(dev, buf, sizeof(buf));
ret = saa7164_cmd_send(bus->dev, unitid, SET_CUR,
unsigned long stamp;
int r;
- if (debug >= 4)
+ if (saa_debug >= 4)
saa7164_bus_dump(dev);
dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno);
32 bus
*/
-unsigned int debug;
-module_param(debug, int, 0644);
+unsigned int saa_debug;
+module_param_named(debug, saa_debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages");
unsigned int waitsecs = 10;
printk(KERN_ERR "%s() Unsupported board detected, "
"registering without firmware\n", __func__);
- dprintk(1, "%s() parameter debug = %d\n", __func__, debug);
+ dprintk(1, "%s() parameter debug = %d\n", __func__, saa_debug);
dprintk(1, "%s() parameter waitsecs = %d\n", __func__, waitsecs);
fail_fw:
/* ----------------------------------------------------------- */
-extern unsigned int debug;
+extern unsigned int saa_debug;
#define dprintk(level, fmt, arg...)\
- do { if (debug & level)\
+ do { if (saa_debug & level)\
printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
} while (0)
"SuperH Mobile CEU driver attached to camera %d\n",
icd->devnum);
- clk_enable(pcdev->clk);
+ pm_runtime_get_sync(ici->v4l2_dev.dev);
ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
while (ceu_read(pcdev, CSTSR) & 1)
}
spin_unlock_irqrestore(&pcdev->lock, flags);
- clk_disable(pcdev->clk);
+ pm_runtime_put_sync(ici->v4l2_dev.dev);
dev_info(icd->dev.parent,
"SuperH Mobile CEU driver detached from camera %d\n",
}
-static struct vm_operations_struct sn9c102_vm_ops = {
+static const struct vm_operations_struct sn9c102_vm_ops = {
.open = sn9c102_vm_open,
.close = sn9c102_vm_close,
};
if (sbuf->mapcount == 0)
sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED;
}
-static struct vm_operations_struct stk_v4l_vm_ops = {
+static const struct vm_operations_struct stk_v4l_vm_ops = {
.open = stk_v4l_vm_open,
.close = stk_v4l_vm_close
};
#include <linux/timer.h>
#include <linux/slab.h>
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/highmem.h>
#include <linux/vmalloc.h>
#include <linux/module.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/highmem.h>
#include <linux/vmalloc.h>
#include <linux/module.h>
buffer->vma_use_count--;
}
-static struct vm_operations_struct uvc_vm_ops = {
+static const struct vm_operations_struct uvc_vm_ops = {
.open = uvc_vm_open,
.close = uvc_vm_close,
};
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/mm.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
}
}
-static struct vm_operations_struct videobuf_vm_ops = {
+static const struct vm_operations_struct videobuf_vm_ops = {
.open = videobuf_vm_open,
.close = videobuf_vm_close,
};
#include <linux/init.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
return 0;
}
-static struct vm_operations_struct videobuf_vm_ops =
+static const struct vm_operations_struct videobuf_vm_ops =
{
.open = videobuf_vm_open,
.close = videobuf_vm_close,
return;
}
-static struct vm_operations_struct videobuf_vm_ops =
+static const struct vm_operations_struct videobuf_vm_ops =
{
.open = videobuf_vm_open,
.close = videobuf_vm_close,
dprintk("vino_vm_close(): count = %d\n", fb->map_count);
}
-static struct vm_operations_struct vino_vm_ops = {
+static const struct vm_operations_struct vino_vm_ops = {
.open = vino_vm_open,
.close = vino_vm_close,
};
}
-static struct vm_operations_struct zc0301_vm_ops = {
+static const struct vm_operations_struct zc0301_vm_ops = {
.open = zc0301_vm_open,
.close = zc0301_vm_close,
};
mutex_unlock(&zr->resource_lock);
}
-static struct vm_operations_struct zoran_vm_ops = {
+static const struct vm_operations_struct zoran_vm_ops = {
.open = zoran_vm_open,
.close = zoran_vm_close,
};
card->id.type = id_reg.type;
card->id.category = id_reg.category;
card->id.class = id_reg.class;
+ dev_dbg(&card->dev, "if_mode = %02x\n", id_reg.if_mode);
}
complete(&card->mrq_complete);
- dev_dbg(&card->dev, "if_mode = %02x\n", id_reg.if_mode);
return -EAGAIN;
}
}
#include <linux/init.h>
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/sched.h>
#define my_VERSION MPT_LINUX_VERSION_COMMON
#define MYNAM "mptlan"
* The AB3100 is usually assigned address 0x48 (7-bit)
* The chip is defined in the platform i2c_board_data section.
*/
-static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD_1(ab3100);
u8 ab3100_get_chip_type(struct ab3100 *ab3100)
{
}
static const struct i2c_device_id ab3100_id[] = {
- { "ab3100", ab3100 },
+ { "ab3100", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ab3100_id);
add_children(struct twl4030_platform_data *pdata, unsigned long features)
{
struct device *child;
- struct device *usb_transceiver = NULL;
if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
child = add_child(3, "twl4030_bci",
}
if (twl_has_usb() && pdata->usb) {
+
+ static struct regulator_consumer_supply usb1v5 = {
+ .supply = "usb1v5",
+ };
+ static struct regulator_consumer_supply usb1v8 = {
+ .supply = "usb1v8",
+ };
+ static struct regulator_consumer_supply usb3v1 = {
+ .supply = "usb3v1",
+ };
+
+ /* First add the regulators so that they can be used by transceiver */
+ if (twl_has_regulator()) {
+ /* this is a template that gets copied */
+ struct regulator_init_data usb_fixed = {
+ .constraints.valid_modes_mask =
+ REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .constraints.valid_ops_mask =
+ REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ };
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V5,
+ &usb_fixed, &usb1v5, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB1V8,
+ &usb_fixed, &usb1v8, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ child = add_regulator_linked(TWL4030_REG_VUSB3V1,
+ &usb_fixed, &usb3v1, 1);
+ if (IS_ERR(child))
+ return PTR_ERR(child);
+
+ }
+
child = add_child(0, "twl4030_usb",
pdata->usb, sizeof(*pdata->usb),
true,
/* irq0 = USB_PRES, irq1 = USB */
pdata->irq_base + 8 + 2, pdata->irq_base + 4);
+
if (IS_ERR(child))
return PTR_ERR(child);
/* we need to connect regulators to this transceiver */
- usb_transceiver = child;
+ if (twl_has_regulator() && child) {
+ usb1v5.dev = child;
+ usb1v8.dev = child;
+ usb3v1.dev = child;
+ }
}
if (twl_has_watchdog()) {
return PTR_ERR(child);
}
- if (twl_has_regulator() && usb_transceiver) {
- static struct regulator_consumer_supply usb1v5 = {
- .supply = "usb1v5",
- };
- static struct regulator_consumer_supply usb1v8 = {
- .supply = "usb1v8",
- };
- static struct regulator_consumer_supply usb3v1 = {
- .supply = "usb3v1",
- };
-
- /* this is a template that gets copied */
- struct regulator_init_data usb_fixed = {
- .constraints.valid_modes_mask =
- REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .constraints.valid_ops_mask =
- REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- };
-
- usb1v5.dev = usb_transceiver;
- usb1v8.dev = usb_transceiver;
- usb3v1.dev = usb_transceiver;
-
- child = add_regulator_linked(TWL4030_REG_VUSB1V5, &usb_fixed,
- &usb1v5, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSB1V8, &usb_fixed,
- &usb1v8, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
-
- child = add_regulator_linked(TWL4030_REG_VUSB3V1, &usb_fixed,
- &usb3v1, 1);
- if (IS_ERR(child))
- return PTR_ERR(child);
- }
-
/* maybe add LDOs that are omitted on cost-reduced parts */
if (twl_has_regulator() && !(features & TPS_SUBSET)) {
child = add_regulator(TWL4030_REG_VPLL2, pdata->vpll2);
twl->client = i2c_new_dummy(client->adapter,
twl->address);
if (!twl->client) {
- dev_err(&twl->client->dev,
+ dev_err(&client->dev,
"can't attach client %d\n", i);
status = -ENOMEM;
goto fail;
*/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/ucb1400.h>
unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
*/
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/errno.h>
{
int i, ret;
+ mutex_init(&wm831x->irq_lock);
+
if (!irq) {
dev_warn(wm831x->dev,
"No interrupt specified - functionality limited\n");
}
wm831x->irq = irq;
- mutex_init(&wm831x->irq_lock);
INIT_WORK(&wm831x->irq_work, wm831x_irq_worker);
/* Mask the individual interrupt sources */
#include <linux/i2c.h>
#include <linux/mutex.h>
-/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(max6875);
-
/* The MAX6875 can only read/write 16 bytes at a time */
#define SLICE_SIZE 16
#define SLICE_BITS 4
.read = max6875_read,
};
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int max6875_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info)
+static int max6875_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = client->adapter;
+ struct max6875_data *data;
+ int err;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
| I2C_FUNC_SMBUS_READ_BYTE))
return -ENODEV;
- /* Only check even addresses */
+ /* Only bind to even addresses */
if (client->addr & 1)
return -ENODEV;
- strlcpy(info->type, "max6875", I2C_NAME_SIZE);
-
- return 0;
-}
-
-static int max6875_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- struct max6875_data *data;
- int err;
-
if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
return -ENOMEM;
.probe = max6875_probe,
.remove = max6875_remove,
.id_table = max6875_id,
-
- .detect = max6875_detect,
- .address_data = &addr_data,
};
static int __init max6875_init(void)
#include <linux/device.h>
#include <linux/file.h>
#include <linux/cdev.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/uaccess.h>
*
*/
+#include <linux/sched.h>
#include "ibmasm.h"
#include "lowlevel.h"
*
*/
+#include <linux/sched.h>
#include "ibmasm.h"
#include "lowlevel.h"
*
*/
+#include <linux/sched.h>
#include "ibmasm.h"
#include "dot_command.h"
#include <linux/interrupt.h>
#include <linux/cdev.h>
#include <linux/phantom.h>
+#include <linux/sched.h>
#include <linux/smp_lock.h>
#include <asm/atomic.h>
return mask;
}
-static struct file_operations phantom_file_ops = {
+static const struct file_operations phantom_file_ops = {
.open = phantom_open,
.release = phantom_release,
.unlocked_ioctl = phantom_ioctl,
/* Guaranteed user available resources on each node */
static int max_user_cbrs, max_user_dsr_bytes;
-static struct file_operations gru_fops;
static struct miscdevice gru_miscdev;
gru_proc_exit();
}
-static struct file_operations gru_fops = {
+static const struct file_operations gru_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = gru_file_unlocked_ioctl,
.mmap = gru_file_mmap,
.fops = &gru_fops,
};
-struct vm_operations_struct gru_vm_ops = {
+const struct vm_operations_struct gru_vm_ops = {
.close = gru_vma_close,
.fault = gru_fault,
};
/* Need 1K cacheline aligned that does not cross page boundary */
p = kmalloc(4096, 0);
+ if (p == NULL)
+ return -ENOMEM;
mq = ALIGNUP(p, 1024);
memset(mes, 0xee, sizeof(mes));
dw = mq;
static ssize_t options_write(struct file *file, const char __user *userbuf,
size_t count, loff_t *data)
{
- unsigned long val;
- char buf[80];
+ char buf[20];
- if (strncpy_from_user(buf, userbuf, sizeof(buf) - 1) < 0)
+ if (count >= sizeof(buf))
+ return -EINVAL;
+ if (copy_from_user(buf, userbuf, count))
return -EFAULT;
- buf[count - 1] = '\0';
- if (!strict_strtoul(buf, 10, &val))
- gru_options = val;
+ buf[count] = '\0';
+ if (strict_strtoul(buf, 0, &gru_options))
+ return -EINVAL;
return count;
}
static int create_proc_file(struct proc_entry *p)
{
- p->entry = create_proc_entry(p->name, p->mode, proc_gru);
+ p->entry = proc_create(p->name, p->mode, proc_gru, p->fops);
if (!p->entry)
return -1;
- p->entry->proc_fops = p->fops;
return 0;
}
*/
struct gru_unload_context_req;
-extern struct vm_operations_struct gru_vm_ops;
+extern const struct vm_operations_struct gru_vm_ops;
extern struct device *grudev;
extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma,
return 0;
}
-static struct file_operations mmc_dbg_ext_csd_fops = {
+static const struct file_operations mmc_dbg_ext_csd_fops = {
.open = mmc_ext_csd_open,
.read = mmc_ext_csd_read,
.release = mmc_ext_csd_release,
unsigned i, nr_strings;
char **buffer, *string;
+ /* Find all null-terminated (including zero length) strings in
+ the TPLLV1_INFO field. Trailing garbage is ignored. */
buf += 2;
size -= 2;
if (buf[i] == 0)
nr_strings++;
}
-
- if (nr_strings < 4) {
- printk(KERN_WARNING "SDIO: ignoring broken CISTPL_VERS_1\n");
+ if (nr_strings == 0)
return 0;
- }
size = i;
static const unsigned int speed_unit[8] =
{ 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 };
+/* FUNCE tuples with these types get passed to SDIO drivers */
+static const unsigned char funce_type_whitelist[] = {
+ 4 /* CISTPL_FUNCE_LAN_NODE_ID used in Broadcom cards */
+};
+
+static int cistpl_funce_whitelisted(unsigned char type)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(funce_type_whitelist); i++) {
+ if (funce_type_whitelist[i] == type)
+ return 1;
+ }
+ return 0;
+}
+
static int cistpl_funce_common(struct mmc_card *card,
const unsigned char *buf, unsigned size)
{
unsigned vsn;
unsigned min_size;
+ /* let SDIO drivers take care of whitelisted FUNCE tuples */
+ if (cistpl_funce_whitelisted(buf[0]))
+ return -EILSEQ;
+
vsn = func->card->cccr.sdio_vsn;
min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42;
else
ret = cistpl_funce_common(card, buf, size);
- if (ret) {
+ if (ret && ret != -EILSEQ) {
printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u "
"type %u\n", mmc_hostname(card->host), size, buf[0]);
- return ret;
}
- return 0;
+ return ret;
}
typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *,
for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++)
if (cis_tpl_list[i].code == tpl_code)
break;
- if (i >= ARRAY_SIZE(cis_tpl_list)) {
- /* this tuple is unknown to the core */
- this->next = NULL;
- this->code = tpl_code;
- this->size = tpl_link;
- *prev = this;
- prev = &this->next;
- printk(KERN_DEBUG
- "%s: queuing CIS tuple 0x%02x length %u\n",
- mmc_hostname(card->host), tpl_code, tpl_link);
- } else {
+ if (i < ARRAY_SIZE(cis_tpl_list)) {
const struct cis_tpl *tpl = cis_tpl_list + i;
if (tpl_link < tpl->min_size) {
printk(KERN_ERR
- "%s: bad CIS tuple 0x%02x (length = %u, expected >= %u)\n",
+ "%s: bad CIS tuple 0x%02x"
+ " (length = %u, expected >= %u)\n",
mmc_hostname(card->host),
tpl_code, tpl_link, tpl->min_size);
ret = -EINVAL;
ret = tpl->parse(card, func,
this->data, tpl_link);
}
- kfree(this);
+ /*
+ * We don't need the tuple anymore if it was
+ * successfully parsed by the SDIO core or if it is
+ * not going to be parsed by SDIO drivers.
+ */
+ if (!ret || ret != -EILSEQ)
+ kfree(this);
+ } else {
+ /* unknown tuple */
+ ret = -EILSEQ;
+ }
+
+ if (ret == -EILSEQ) {
+ /* this tuple is unknown to the core or whitelisted */
+ this->next = NULL;
+ this->code = tpl_code;
+ this->size = tpl_link;
+ *prev = this;
+ prev = &this->next;
+ printk(KERN_DEBUG
+ "%s: queuing CIS tuple 0x%02x length %u\n",
+ mmc_hostname(card->host), tpl_code, tpl_link);
+ /* keep on analyzing tuples */
+ ret = 0;
}
ptr += tpl_link;
If unsure, say N.
+config MMC_S3C_HW_SDIO_IRQ
+ bool "Hardware support for SDIO IRQ"
+ depends on MMC_S3C
+ help
+ Enable the hardware support for SDIO interrupts instead of using
+ the generic polling code.
+
+choice
+ prompt "Samsung S3C SD/MMC transfer code"
+ depends on MMC_S3C
+
+config MMC_S3C_PIO
+ bool "Use PIO transfers only"
+ help
+ Use PIO to transfer data between memory and the hardware.
+
+ PIO is slower than DMA as it requires CPU instructions to
+ move the data. This has been the traditional default for
+ the S3C MCI driver.
+
+config MMC_S3C_DMA
+ bool "Use DMA transfers only (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ Use DMA to transfer data between memory and the hardare.
+
+ Currently, the DMA support in this driver seems to not be
+ working properly and needs to be debugged before this
+ option is useful.
+
+config MMC_S3C_PIODMA
+ bool "Support for both PIO and DMA (EXPERIMENTAL)"
+ help
+ Compile both the PIO and DMA transfer routines into the
+ driver and let the platform select at run-time which one
+ is best.
+
+ See notes for the DMA option.
+
+endchoice
+
config MMC_SDRICOH_CS
tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
depends on EXPERIMENTAL && PCI && PCMCIA
#include <asm/irq.h>
#include <asm/gpio.h>
-#include <asm/mach/mmc.h>
#include <mach/board.h>
#include <mach/cpu.h>
#include <mach/at91_mci.h>
struct scatterlist *sg;
unsigned int i;
enum dma_data_direction direction;
+ unsigned int sglen;
/*
* We don't do DMA on "complex" transfers, i.e. with
else
direction = DMA_TO_DEVICE;
+ sglen = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, direction);
+ if (sglen != data->sg_len)
+ goto unmap_exit;
desc = chan->device->device_prep_slave_sg(chan,
data->sg, data->sg_len, direction,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!desc)
- return -ENOMEM;
+ goto unmap_exit;
host->dma.data_desc = desc;
desc->callback = atmci_dma_complete;
chan->device->device_issue_pending(chan);
return 0;
+unmap_exit:
+ dma_unmap_sg(&host->pdev->dev, data->sg, sglen, direction);
+ return -ENOMEM;
}
#else /* CONFIG_MMC_ATMELMCI_DMA */
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/gpio.h>
+#include <linux/amba/mmci.h>
+#include <linux/regulator/consumer.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/sizes.h>
-#include <asm/mach/mmc.h>
#include "mmci.h"
static unsigned int fmax = 515633;
+/*
+ * This must be called with host->lock held
+ */
+static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
+{
+ u32 clk = 0;
+
+ if (desired) {
+ if (desired >= host->mclk) {
+ clk = MCI_CLK_BYPASS;
+ host->cclk = host->mclk;
+ } else {
+ clk = host->mclk / (2 * desired) - 1;
+ if (clk >= 256)
+ clk = 255;
+ host->cclk = host->mclk / (2 * (clk + 1));
+ }
+ if (host->hw_designer == 0x80)
+ clk |= MCI_FCEN; /* Bug fix in ST IP block */
+ clk |= MCI_CLK_ENABLE;
+ /* This hasn't proven to be worthwhile */
+ /* clk |= MCI_CLK_PWRSAVE; */
+ }
+
+ if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
+ clk |= MCI_WIDE_BUS;
+
+ writel(clk, host->base + MMCICLOCK);
+}
+
static void
mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
{
static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct mmci_host *host = mmc_priv(mmc);
- u32 clk = 0, pwr = 0;
-
- if (ios->clock) {
- if (ios->clock >= host->mclk) {
- clk = MCI_CLK_BYPASS;
- host->cclk = host->mclk;
- } else {
- clk = host->mclk / (2 * ios->clock) - 1;
- if (clk >= 256)
- clk = 255;
- host->cclk = host->mclk / (2 * (clk + 1));
- }
- if (host->hw_designer == AMBA_VENDOR_ST)
- clk |= MCI_FCEN; /* Bug fix in ST IP block */
- clk |= MCI_CLK_ENABLE;
- }
-
- if (host->plat->translate_vdd)
- pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+ u32 pwr = 0;
+ unsigned long flags;
switch (ios->power_mode) {
case MMC_POWER_OFF:
+ if(host->vcc &&
+ regulator_is_enabled(host->vcc))
+ regulator_disable(host->vcc);
break;
case MMC_POWER_UP:
+#ifdef CONFIG_REGULATOR
+ if (host->vcc)
+ /* This implicitly enables the regulator */
+ mmc_regulator_set_ocr(host->vcc, ios->vdd);
+#endif
+ /*
+ * The translate_vdd function is not used if you have
+ * an external regulator, or your design is really weird.
+ * Using it would mean sending in power control BOTH using
+ * a regulator AND the 4 MMCIPWR bits. If we don't have
+ * a regulator, we might have some other platform specific
+ * power control behind this translate function.
+ */
+ if (!host->vcc && host->plat->translate_vdd)
+ pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
/* The ST version does not have this, fall through to POWER_ON */
if (host->hw_designer != AMBA_VENDOR_ST) {
pwr |= MCI_PWR_UP;
}
}
- writel(clk, host->base + MMCICLOCK);
+ spin_lock_irqsave(&host->lock, flags);
+
+ mmci_set_clkreg(host, ios->clock);
if (host->pwr != pwr) {
host->pwr = pwr;
writel(pwr, host->base + MMCIPOWER);
}
+
+ spin_unlock_irqrestore(&host->lock, flags);
}
static int mmci_get_ro(struct mmc_host *mmc)
static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
{
- struct mmc_platform_data *plat = dev->dev.platform_data;
+ struct mmci_platform_data *plat = dev->dev.platform_data;
struct mmci_host *host;
struct mmc_host *mmc;
int ret;
mmc->ops = &mmci_ops;
mmc->f_min = (host->mclk + 511) / 512;
mmc->f_max = min(host->mclk, fmax);
- mmc->ocr_avail = plat->ocr_mask;
+#ifdef CONFIG_REGULATOR
+ /* If we're using the regulator framework, try to fetch a regulator */
+ host->vcc = regulator_get(&dev->dev, "vmmc");
+ if (IS_ERR(host->vcc))
+ host->vcc = NULL;
+ else {
+ int mask = mmc_regulator_get_ocrmask(host->vcc);
+
+ if (mask < 0)
+ dev_err(&dev->dev, "error getting OCR mask (%d)\n",
+ mask);
+ else {
+ host->mmc->ocr_avail = (u32) mask;
+ if (plat->ocr_mask)
+ dev_warn(&dev->dev,
+ "Provided ocr_mask/setpower will not be used "
+ "(using regulator instead)\n");
+ }
+ }
+#endif
+ /* Fall back to platform data if no regulator is found */
+ if (host->vcc == NULL)
+ mmc->ocr_avail = plat->ocr_mask;
+ mmc->caps = plat->capabilities;
/*
* We can do SGIO
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
-#ifdef CONFIG_GPIOLIB
if (gpio_is_valid(plat->gpio_cd)) {
ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
if (ret == 0)
else if (ret != -ENOSYS)
goto err_gpio_wp;
}
-#endif
ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
if (ret)
clk_disable(host->clk);
clk_put(host->clk);
+ if (regulator_is_enabled(host->vcc))
+ regulator_disable(host->vcc);
+ regulator_put(host->vcc);
+
mmc_free_host(mmc);
amba_release_regions(dev);
unsigned int mclk;
unsigned int cclk;
u32 pwr;
- struct mmc_platform_data *plat;
+ struct mmci_platform_data *plat;
u8 hw_designer;
u8 hw_revision:4;
struct scatterlist *sg_ptr;
unsigned int sg_off;
unsigned int size;
+ struct regulator *vcc;
};
static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
static int __init omap_hsmmc_init(void)
{
/* Register the MMC driver */
- return platform_driver_register(&omap_hsmmc_driver);
+ return platform_driver_probe(&omap_hsmmc_driver, omap_hsmmc_probe);
}
static void __exit omap_hsmmc_cleanup(void)
#include <linux/mmc/host.h>
#include <linux/io.h>
#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
#include <asm/sizes.h>
static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
{
+ int on;
+
#ifdef CONFIG_REGULATOR
if (host->vcc)
mmc_regulator_set_ocr(host->vcc, vdd);
#endif
+ if (!host->vcc && host->pdata &&
+ gpio_is_valid(host->pdata->gpio_power)) {
+ on = ((1 << vdd) & host->pdata->ocr_mask);
+ gpio_set_value(host->pdata->gpio_power,
+ !!on ^ host->pdata->gpio_power_invert);
+ }
if (!host->vcc && host->pdata && host->pdata->setpower)
host->pdata->setpower(mmc_dev(host->mmc), vdd);
}
{
struct pxamci_host *host = mmc_priv(mmc);
+ if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
+ if (host->pdata->gpio_card_ro_invert)
+ return !gpio_get_value(host->pdata->gpio_card_ro);
+ else
+ return gpio_get_value(host->pdata->gpio_card_ro);
+ }
if (host->pdata && host->pdata->get_ro)
return !!host->pdata->get_ro(mmc_dev(mmc));
/*
struct mmc_host *mmc;
struct pxamci_host *host = NULL;
struct resource *r, *dmarx, *dmatx;
- int ret, irq;
+ int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
}
host->dma_drcmrtx = dmatx->start;
+ if (host->pdata) {
+ gpio_cd = host->pdata->gpio_card_detect;
+ gpio_ro = host->pdata->gpio_card_ro;
+ gpio_power = host->pdata->gpio_power;
+ }
+ if (gpio_is_valid(gpio_power)) {
+ ret = gpio_request(gpio_power, "mmc card power");
+ if (ret) {
+ dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
+ goto out;
+ }
+ gpio_direction_output(gpio_power,
+ host->pdata->gpio_power_invert);
+ }
+ if (gpio_is_valid(gpio_ro)) {
+ ret = gpio_request(gpio_ro, "mmc card read only");
+ if (ret) {
+ dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_ro);
+ goto err_gpio_ro;
+ }
+ gpio_direction_input(gpio_ro);
+ }
+ if (gpio_is_valid(gpio_cd)) {
+ ret = gpio_request(gpio_cd, "mmc card detect");
+ if (ret) {
+ dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_cd);
+ goto err_gpio_cd;
+ }
+ gpio_direction_input(gpio_cd);
+
+ ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "mmc card detect", mmc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request card detect IRQ\n");
+ goto err_request_irq;
+ }
+ }
+
if (host->pdata && host->pdata->init)
host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
+ if (gpio_is_valid(gpio_power) && host->pdata->setpower)
+ dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n");
+ if (gpio_is_valid(gpio_ro) && host->pdata->get_ro)
+ dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n");
+
mmc_add_host(mmc);
return 0;
+err_request_irq:
+ gpio_free(gpio_cd);
+err_gpio_cd:
+ gpio_free(gpio_ro);
+err_gpio_ro:
+ gpio_free(gpio_power);
out:
if (host) {
if (host->dma >= 0)
static int pxamci_remove(struct platform_device *pdev)
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
+ int gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
platform_set_drvdata(pdev, NULL);
if (mmc) {
struct pxamci_host *host = mmc_priv(mmc);
+ if (host->pdata) {
+ gpio_cd = host->pdata->gpio_card_detect;
+ gpio_ro = host->pdata->gpio_card_ro;
+ gpio_power = host->pdata->gpio_power;
+ }
+ if (gpio_is_valid(gpio_cd)) {
+ free_irq(gpio_to_irq(gpio_cd), mmc);
+ gpio_free(gpio_cd);
+ }
+ if (gpio_is_valid(gpio_ro))
+ gpio_free(gpio_ro);
+ if (gpio_is_valid(gpio_power))
+ gpio_free(gpio_power);
if (host->vcc)
regulator_put(host->vcc);
}
#ifdef CONFIG_PM
-static int pxamci_suspend(struct platform_device *dev, pm_message_t state)
+static int pxamci_suspend(struct device *dev)
{
- struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
if (mmc)
- ret = mmc_suspend_host(mmc, state);
+ ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
return ret;
}
-static int pxamci_resume(struct platform_device *dev)
+static int pxamci_resume(struct device *dev)
{
- struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
if (mmc)
return ret;
}
-#else
-#define pxamci_suspend NULL
-#define pxamci_resume NULL
+
+static struct dev_pm_ops pxamci_pm_ops = {
+ .suspend = pxamci_suspend,
+ .resume = pxamci_resume,
+};
#endif
static struct platform_driver pxamci_driver = {
.probe = pxamci_probe,
.remove = pxamci_remove,
- .suspend = pxamci_suspend,
- .resume = pxamci_resume,
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &pxamci_pm_ops,
+#endif
},
};
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
dev_dbg(&host->pdev->dev, args); \
} while (0)
-#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
-
static struct s3c2410_dma_client s3cmci_dma_client = {
.name = "s3c-mci",
};
#endif /* CONFIG_MMC_DEBUG */
+/**
+ * s3cmci_host_usedma - return whether the host is using dma or pio
+ * @host: The host state
+ *
+ * Return true if the host is using DMA to transfer data, else false
+ * to use PIO mode. Will return static data depending on the driver
+ * configuration.
+ */
+static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
+{
+#ifdef CONFIG_MMC_S3C_PIO
+ return false;
+#elif defined(CONFIG_MMC_S3C_DMA)
+ return true;
+#else
+ return host->dodma;
+#endif
+}
+
+/**
+ * s3cmci_host_canpio - return true if host has pio code available
+ *
+ * Return true if the driver has been compiled with the PIO support code
+ * available.
+ */
+static inline bool s3cmci_host_canpio(void)
+{
+#ifdef CONFIG_MMC_S3C_PIO
+ return true;
+#else
+ return false;
+#endif
+}
+
static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
{
u32 newmask;
static inline void clear_imask(struct s3cmci_host *host)
{
- writel(0, host->base + host->sdiimsk);
+ u32 mask = readl(host->base + host->sdiimsk);
+
+ /* preserve the SDIO IRQ mask state */
+ mask &= S3C2410_SDIIMSK_SDIOIRQ;
+ writel(mask, host->base + host->sdiimsk);
+}
+
+/**
+ * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
+ * @host: The host to check.
+ *
+ * Test to see if the SDIO interrupt is being signalled in case the
+ * controller has failed to re-detect a card interrupt. Read GPE8 and
+ * see if it is low and if so, signal a SDIO interrupt.
+ *
+ * This is currently called if a request is finished (we assume that the
+ * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
+ * already being indicated.
+*/
+static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
+{
+ if (host->sdio_irqen) {
+ if (gpio_get_value(S3C2410_GPE(8)) == 0) {
+ printk(KERN_DEBUG "%s: signalling irq\n", __func__);
+ mmc_signal_sdio_irq(host->mmc);
+ }
+ }
}
static inline int get_data_buffer(struct s3cmci_host *host,
return 63 - fifostat;
}
+/**
+ * s3cmci_enable_irq - enable IRQ, after having disabled it.
+ * @host: The device state.
+ * @more: True if more IRQs are expected from transfer.
+ *
+ * Enable the main IRQ if needed after it has been disabled.
+ *
+ * The IRQ can be one of the following states:
+ * - disabled during IDLE
+ * - disabled whilst processing data
+ * - enabled during transfer
+ * - enabled whilst awaiting SDIO interrupt detection
+ */
+static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
+{
+ unsigned long flags;
+ bool enable = false;
+
+ local_irq_save(flags);
+
+ host->irq_enabled = more;
+ host->irq_disabled = false;
+
+ enable = more | host->sdio_irqen;
+
+ if (host->irq_state != enable) {
+ host->irq_state = enable;
+
+ if (enable)
+ enable_irq(host->irq);
+ else
+ disable_irq(host->irq);
+ }
+
+ local_irq_restore(flags);
+}
+
+/**
+ *
+ */
+static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ //printk(KERN_DEBUG "%s: transfer %d\n", __func__, transfer);
+
+ host->irq_disabled = transfer;
+
+ if (transfer && host->irq_state) {
+ host->irq_state = false;
+ disable_irq(host->irq);
+ }
+
+ local_irq_restore(flags);
+}
+
static void do_pio_read(struct s3cmci_host *host)
{
int res;
{
struct s3cmci_host *host = (struct s3cmci_host *) data;
-
- disable_irq(host->irq);
+ s3cmci_disable_irq(host, true);
if (host->pio_active == XFER_WRITE)
do_pio_write(host);
host->mrq->data->error = -EINVAL;
}
+ s3cmci_enable_irq(host, false);
finalize_request(host);
} else
- enable_irq(host->irq);
+ s3cmci_enable_irq(host, true);
}
/*
struct s3cmci_host *host = dev_id;
struct mmc_command *cmd;
u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
- u32 mci_cclear, mci_dclear;
+ u32 mci_cclear = 0, mci_dclear;
unsigned long iflags;
+ mci_dsta = readl(host->base + S3C2410_SDIDSTA);
+ mci_imsk = readl(host->base + host->sdiimsk);
+
+ if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
+ if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
+ mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
+ writel(mci_dclear, host->base + S3C2410_SDIDSTA);
+
+ mmc_signal_sdio_irq(host->mmc);
+ return IRQ_HANDLED;
+ }
+ }
+
spin_lock_irqsave(&host->complete_lock, iflags);
mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
- mci_dsta = readl(host->base + S3C2410_SDIDSTA);
mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
mci_fsta = readl(host->base + S3C2410_SDIFSTA);
- mci_imsk = readl(host->base + host->sdiimsk);
- mci_cclear = 0;
mci_dclear = 0;
if ((host->complete_what == COMPLETION_NONE) ||
goto irq_out;
}
- if (!host->dodma) {
+ if (!s3cmci_host_usedma(host)) {
if ((host->pio_active == XFER_WRITE) &&
(mci_fsta & S3C2410_SDIFSTA_TFDET)) {
dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
size, mci_dsta, mci_dcnt);
+ host->dma_complete = 1;
host->complete_what = COMPLETION_FINALIZE;
out:
fail_request:
host->mrq->data->error = -EINVAL;
host->complete_what = COMPLETION_FINALIZE;
- writel(0, host->base + host->sdiimsk);
- goto out;
+ clear_imask(host);
+ goto out;
}
static void finalize_request(struct s3cmci_host *host)
if (cmd->data && (cmd->error == 0) &&
(cmd->data->error == 0)) {
- if (host->dodma && (!host->dma_complete)) {
- dbg(host, dbg_dma, "DMA Missing!\n");
+ if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
+ dbg(host, dbg_dma, "DMA Missing (%d)!\n",
+ host->dma_complete);
return;
}
}
writel(0, host->base + S3C2410_SDICMDARG);
writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
writel(0, host->base + S3C2410_SDICMDCON);
- writel(0, host->base + host->sdiimsk);
+ clear_imask(host);
if (cmd->data && cmd->error)
cmd->data->error = cmd->error;
/* If we had an error while transfering data we flush the
* DMA channel and the fifo to clear out any garbage. */
if (mrq->data->error != 0) {
- if (host->dodma)
+ if (s3cmci_host_usedma(host))
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
if (host->is2440) {
request_done:
host->complete_what = COMPLETION_NONE;
host->mrq = NULL;
+
+ s3cmci_check_sdio_irq(host);
mmc_request_done(host->mmc, mrq);
}
dcon = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
- if (host->dodma)
+ if (s3cmci_host_usedma(host))
dcon |= S3C2410_SDIDCON_DMAEN;
if (host->bus_width == MMC_BUS_WIDTH_4)
static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
{
int dma_len, i;
- int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+ int rw = data->flags & MMC_DATA_WRITE;
BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
- (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
if (dma_len == 0)
return -ENOMEM;
for (i = 0; i < dma_len; i++) {
int res;
- dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i,
- sg_dma_address(&data->sg[i]),
- sg_dma_len(&data->sg[i]));
+ dbg(host, dbg_dma, "enqueue %i: %08x@%u\n", i,
+ sg_dma_address(&data->sg[i]),
+ sg_dma_len(&data->sg[i]));
- res = s3c2410_dma_enqueue(host->dma, (void *) host,
+ res = s3c2410_dma_enqueue(host->dma, host,
sg_dma_address(&data->sg[i]),
sg_dma_len(&data->sg[i]));
return;
}
- if (host->dodma)
+ if (s3cmci_host_usedma(host))
res = s3cmci_prepare_dma(host, cmd->data);
else
res = s3cmci_prepare_pio(host, cmd->data);
s3cmci_send_command(host, cmd);
/* Enable Interrupt */
- enable_irq(host->irq);
+ s3cmci_enable_irq(host, true);
}
static int s3cmci_card_present(struct mmc_host *mmc)
if (pdata->gpio_detect == 0)
return -ENOSYS;
- ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1;
+ ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
return ret ^ pdata->detect_invert;
}
switch (ios->power_mode) {
case MMC_POWER_ON:
case MMC_POWER_UP:
- s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK);
- s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD);
- s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0);
- s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
- s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
- s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3);
if (host->pdata->set_power)
host->pdata->set_power(ios->power_mode, ios->vdd);
case MMC_POWER_OFF:
default:
- s3c2410_gpio_setpin(S3C2410_GPE5, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
+ gpio_direction_output(S3C2410_GPE(5), 0);
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
struct s3c24xx_mci_pdata *pdata = host->pdata;
int ret;
- if (pdata->gpio_wprotect == 0)
+ if (pdata->no_wprotect)
return 0;
ret = s3c2410_gpio_getpin(pdata->gpio_wprotect);
return ret;
}
+static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct s3cmci_host *host = mmc_priv(mmc);
+ unsigned long flags;
+ u32 con;
+
+ local_irq_save(flags);
+
+ con = readl(host->base + S3C2410_SDICON);
+ host->sdio_irqen = enable;
+
+ if (enable == host->sdio_irqen)
+ goto same_state;
+
+ if (enable) {
+ con |= S3C2410_SDICON_SDIOIRQ;
+ enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
+
+ if (!host->irq_state && !host->irq_disabled) {
+ host->irq_state = true;
+ enable_irq(host->irq);
+ }
+ } else {
+ disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
+ con &= ~S3C2410_SDICON_SDIOIRQ;
+
+ if (!host->irq_enabled && host->irq_state) {
+ disable_irq_nosync(host->irq);
+ host->irq_state = false;
+ }
+ }
+
+ writel(con, host->base + S3C2410_SDICON);
+
+ same_state:
+ local_irq_restore(flags);
+
+ s3cmci_check_sdio_irq(host);
+}
+
static struct mmc_host_ops s3cmci_ops = {
.request = s3cmci_request,
.set_ios = s3cmci_set_ios,
.get_ro = s3cmci_get_ro,
.get_cd = s3cmci_card_present,
+ .enable_sdio_irq = s3cmci_enable_sdio_irq,
};
static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
}
#endif
-static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
+
+#ifdef CONFIG_DEBUG_FS
+
+static int s3cmci_state_show(struct seq_file *seq, void *v)
+{
+ struct s3cmci_host *host = seq->private;
+
+ seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
+ seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
+ seq_printf(seq, "Prescale = %d\n", host->prescaler);
+ seq_printf(seq, "is2440 = %d\n", host->is2440);
+ seq_printf(seq, "IRQ = %d\n", host->irq);
+ seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
+ seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
+ seq_printf(seq, "IRQ state = %d\n", host->irq_state);
+ seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
+ seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
+ seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
+ seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
+
+ return 0;
+}
+
+static int s3cmci_state_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, s3cmci_state_show, inode->i_private);
+}
+
+static const struct file_operations s3cmci_fops_state = {
+ .owner = THIS_MODULE,
+ .open = s3cmci_state_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
+
+struct s3cmci_reg {
+ unsigned short addr;
+ unsigned char *name;
+} debug_regs[] = {
+ DBG_REG(CON),
+ DBG_REG(PRE),
+ DBG_REG(CMDARG),
+ DBG_REG(CMDCON),
+ DBG_REG(CMDSTAT),
+ DBG_REG(RSP0),
+ DBG_REG(RSP1),
+ DBG_REG(RSP2),
+ DBG_REG(RSP3),
+ DBG_REG(TIMER),
+ DBG_REG(BSIZE),
+ DBG_REG(DCON),
+ DBG_REG(DCNT),
+ DBG_REG(DSTA),
+ DBG_REG(FSTA),
+ {}
+};
+
+static int s3cmci_regs_show(struct seq_file *seq, void *v)
+{
+ struct s3cmci_host *host = seq->private;
+ struct s3cmci_reg *rptr = debug_regs;
+
+ for (; rptr->name; rptr++)
+ seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
+ readl(host->base + rptr->addr));
+
+ seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
+
+ return 0;
+}
+
+static int s3cmci_regs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, s3cmci_regs_show, inode->i_private);
+}
+
+static const struct file_operations s3cmci_fops_regs = {
+ .owner = THIS_MODULE,
+ .open = s3cmci_regs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static void s3cmci_debugfs_attach(struct s3cmci_host *host)
+{
+ struct device *dev = &host->pdev->dev;
+
+ host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
+ if (IS_ERR(host->debug_root)) {
+ dev_err(dev, "failed to create debugfs root\n");
+ return;
+ }
+
+ host->debug_state = debugfs_create_file("state", 0444,
+ host->debug_root, host,
+ &s3cmci_fops_state);
+
+ if (IS_ERR(host->debug_state))
+ dev_err(dev, "failed to create debug state file\n");
+
+ host->debug_regs = debugfs_create_file("regs", 0444,
+ host->debug_root, host,
+ &s3cmci_fops_regs);
+
+ if (IS_ERR(host->debug_regs))
+ dev_err(dev, "failed to create debug regs file\n");
+}
+
+static void s3cmci_debugfs_remove(struct s3cmci_host *host)
+{
+ debugfs_remove(host->debug_regs);
+ debugfs_remove(host->debug_state);
+ debugfs_remove(host->debug_root);
+}
+
+#else
+static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
+static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int __devinit s3cmci_probe(struct platform_device *pdev)
{
struct s3cmci_host *host;
struct mmc_host *mmc;
int ret;
+ int is2440;
+ int i;
+
+ is2440 = platform_get_device_id(pdev)->driver_data;
mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
if (!mmc) {
goto probe_out;
}
+ for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
+ ret = gpio_request(i, dev_name(&pdev->dev));
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get gpio %d\n", i);
+
+ for (i--; i >= S3C2410_GPE(5); i--)
+ gpio_free(i);
+
+ goto probe_free_host;
+ }
+ }
+
host = mmc_priv(mmc);
host->mmc = mmc;
host->pdev = pdev;
host->clk_div = 2;
}
- host->dodma = 0;
host->complete_what = COMPLETION_NONE;
host->pio_active = XFER_NONE;
- host->dma = S3CMCI_DMA;
+#ifdef CONFIG_MMC_S3C_PIODMA
+ host->dodma = host->pdata->dma;
+#endif
host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!host->mem) {
"failed to get io memory region resouce.\n");
ret = -ENOENT;
- goto probe_free_host;
+ goto probe_free_gpio;
}
host->mem = request_mem_region(host->mem->start,
- RESSIZE(host->mem), pdev->name);
+ resource_size(host->mem), pdev->name);
if (!host->mem) {
dev_err(&pdev->dev, "failed to request io memory region.\n");
ret = -ENOENT;
- goto probe_free_host;
+ goto probe_free_gpio;
}
- host->base = ioremap(host->mem->start, RESSIZE(host->mem));
+ host->base = ioremap(host->mem->start, resource_size(host->mem));
if (!host->base) {
dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
ret = -EINVAL;
* ensure we don't lock the system with un-serviceable requests. */
disable_irq(host->irq);
+ host->irq_state = false;
- host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
-
- if (host->irq_cd >= 0) {
- if (request_irq(host->irq_cd, s3cmci_irq_cd,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
- DRIVER_NAME, host)) {
- dev_err(&pdev->dev, "can't get card detect irq.\n");
- ret = -ENOENT;
+ if (!host->pdata->no_detect) {
+ ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get detect gpio\n");
goto probe_free_irq;
}
- } else {
- dev_warn(&pdev->dev, "host detect has no irq available\n");
- s3c2410_gpio_cfgpin(host->pdata->gpio_detect,
- S3C2410_GPIO_INPUT);
+
+ host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
+
+ if (host->irq_cd >= 0) {
+ if (request_irq(host->irq_cd, s3cmci_irq_cd,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ DRIVER_NAME, host)) {
+ dev_err(&pdev->dev,
+ "can't get card detect irq.\n");
+ ret = -ENOENT;
+ goto probe_free_gpio_cd;
+ }
+ } else {
+ dev_warn(&pdev->dev,
+ "host detect has no irq available\n");
+ gpio_direction_input(host->pdata->gpio_detect);
+ }
+ } else
+ host->irq_cd = -1;
+
+ if (!host->pdata->no_wprotect) {
+ ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get writeprotect\n");
+ goto probe_free_irq_cd;
+ }
+
+ gpio_direction_input(host->pdata->gpio_wprotect);
}
- if (host->pdata->gpio_wprotect)
- s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect,
- S3C2410_GPIO_INPUT);
+ /* depending on the dma state, get a dma channel to use. */
- if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) {
- dev_err(&pdev->dev, "unable to get DMA channel.\n");
- ret = -EBUSY;
- goto probe_free_irq_cd;
+ if (s3cmci_host_usedma(host)) {
+ host->dma = s3c2410_dma_request(DMACH_SDI, &s3cmci_dma_client,
+ host);
+ if (host->dma < 0) {
+ dev_err(&pdev->dev, "cannot get DMA channel.\n");
+ if (!s3cmci_host_canpio()) {
+ ret = -EBUSY;
+ goto probe_free_gpio_wp;
+ } else {
+ dev_warn(&pdev->dev, "falling back to PIO.\n");
+ host->dodma = 0;
+ }
+ }
}
host->clk = clk_get(&pdev->dev, "sdi");
dev_err(&pdev->dev, "failed to find clock source.\n");
ret = PTR_ERR(host->clk);
host->clk = NULL;
- goto probe_free_host;
+ goto probe_free_dma;
}
ret = clk_enable(host->clk);
mmc->ops = &s3cmci_ops;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+#else
mmc->caps = MMC_CAP_4_BIT_DATA;
+#endif
mmc->f_min = host->clk_rate / (host->clk_div * 256);
mmc->f_max = host->clk_rate / host->clk_div;
goto free_cpufreq;
}
+ s3cmci_debugfs_attach(host);
+
platform_set_drvdata(pdev, mmc);
- dev_info(&pdev->dev, "initialisation done.\n");
+ dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
+ s3cmci_host_usedma(host) ? "dma" : "pio",
+ mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
return 0;
clk_free:
clk_put(host->clk);
+ probe_free_dma:
+ if (s3cmci_host_usedma(host))
+ s3c2410_dma_free(host->dma, &s3cmci_dma_client);
+
+ probe_free_gpio_wp:
+ if (!host->pdata->no_wprotect)
+ gpio_free(host->pdata->gpio_wprotect);
+
+ probe_free_gpio_cd:
+ if (!host->pdata->no_detect)
+ gpio_free(host->pdata->gpio_detect);
+
probe_free_irq_cd:
if (host->irq_cd >= 0)
free_irq(host->irq_cd, host);
iounmap(host->base);
probe_free_mem_region:
- release_mem_region(host->mem->start, RESSIZE(host->mem));
+ release_mem_region(host->mem->start, resource_size(host->mem));
+
+ probe_free_gpio:
+ for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+ gpio_free(i);
probe_free_host:
mmc_free_host(mmc);
+
probe_out:
return ret;
}
if (host->irq_cd >= 0)
free_irq(host->irq_cd, host);
+ s3cmci_debugfs_remove(host);
s3cmci_cpufreq_deregister(host);
mmc_remove_host(mmc);
clk_disable(host->clk);
{
struct mmc_host *mmc = platform_get_drvdata(pdev);
struct s3cmci_host *host = mmc_priv(mmc);
+ struct s3c24xx_mci_pdata *pd = host->pdata;
+ int i;
s3cmci_shutdown(pdev);
clk_put(host->clk);
tasklet_disable(&host->pio_tasklet);
- s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client);
+
+ if (s3cmci_host_usedma(host))
+ s3c2410_dma_free(host->dma, &s3cmci_dma_client);
free_irq(host->irq, host);
+ if (!pd->no_wprotect)
+ gpio_free(pd->gpio_wprotect);
+
+ if (!pd->no_detect)
+ gpio_free(pd->gpio_detect);
+
+ for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+ gpio_free(i);
+
+
iounmap(host->base);
- release_mem_region(host->mem->start, RESSIZE(host->mem));
+ release_mem_region(host->mem->start, resource_size(host->mem));
mmc_free_host(mmc);
return 0;
}
-static int __devinit s3cmci_2410_probe(struct platform_device *dev)
-{
- return s3cmci_probe(dev, 0);
-}
+static struct platform_device_id s3cmci_driver_ids[] = {
+ {
+ .name = "s3c2410-sdi",
+ .driver_data = 0,
+ }, {
+ .name = "s3c2412-sdi",
+ .driver_data = 1,
+ }, {
+ .name = "s3c2440-sdi",
+ .driver_data = 1,
+ },
+ { }
+};
-static int __devinit s3cmci_2412_probe(struct platform_device *dev)
-{
- return s3cmci_probe(dev, 1);
-}
+MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
-static int __devinit s3cmci_2440_probe(struct platform_device *dev)
-{
- return s3cmci_probe(dev, 1);
-}
#ifdef CONFIG_PM
-static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+static int s3cmci_suspend(struct device *dev)
{
- struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
+ struct pm_message event = { PM_EVENT_SUSPEND };
- return mmc_suspend_host(mmc, state);
+ return mmc_suspend_host(mmc, event);
}
-static int s3cmci_resume(struct platform_device *dev)
+static int s3cmci_resume(struct device *dev)
{
- struct mmc_host *mmc = platform_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
return mmc_resume_host(mmc);
}
-#else /* CONFIG_PM */
-#define s3cmci_suspend NULL
-#define s3cmci_resume NULL
-#endif /* CONFIG_PM */
-
-
-static struct platform_driver s3cmci_2410_driver = {
- .driver.name = "s3c2410-sdi",
- .driver.owner = THIS_MODULE,
- .probe = s3cmci_2410_probe,
- .remove = __devexit_p(s3cmci_remove),
- .shutdown = s3cmci_shutdown,
+static struct dev_pm_ops s3cmci_pm = {
.suspend = s3cmci_suspend,
.resume = s3cmci_resume,
};
-static struct platform_driver s3cmci_2412_driver = {
- .driver.name = "s3c2412-sdi",
- .driver.owner = THIS_MODULE,
- .probe = s3cmci_2412_probe,
- .remove = __devexit_p(s3cmci_remove),
- .shutdown = s3cmci_shutdown,
- .suspend = s3cmci_suspend,
- .resume = s3cmci_resume,
-};
+#define s3cmci_pm_ops &s3cmci_pm
+#else /* CONFIG_PM */
+#define s3cmci_pm_ops NULL
+#endif /* CONFIG_PM */
-static struct platform_driver s3cmci_2440_driver = {
- .driver.name = "s3c2440-sdi",
- .driver.owner = THIS_MODULE,
- .probe = s3cmci_2440_probe,
+
+static struct platform_driver s3cmci_driver = {
+ .driver = {
+ .name = "s3c-sdi",
+ .owner = THIS_MODULE,
+ .pm = s3cmci_pm_ops,
+ },
+ .id_table = s3cmci_driver_ids,
+ .probe = s3cmci_probe,
.remove = __devexit_p(s3cmci_remove),
.shutdown = s3cmci_shutdown,
- .suspend = s3cmci_suspend,
- .resume = s3cmci_resume,
};
-
static int __init s3cmci_init(void)
{
- platform_driver_register(&s3cmci_2410_driver);
- platform_driver_register(&s3cmci_2412_driver);
- platform_driver_register(&s3cmci_2440_driver);
- return 0;
+ return platform_driver_register(&s3cmci_driver);
}
static void __exit s3cmci_exit(void)
{
- platform_driver_unregister(&s3cmci_2410_driver);
- platform_driver_unregister(&s3cmci_2412_driver);
- platform_driver_unregister(&s3cmci_2440_driver);
+ platform_driver_unregister(&s3cmci_driver);
}
module_init(s3cmci_init);
MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
-MODULE_ALIAS("platform:s3c2410-sdi");
-MODULE_ALIAS("platform:s3c2412-sdi");
-MODULE_ALIAS("platform:s3c2440-sdi");
* published by the Free Software Foundation.
*/
-/* FIXME: DMA Resource management ?! */
-#define S3CMCI_DMA 0
-
enum s3cmci_waitfor {
COMPLETION_NONE,
COMPLETION_FINALIZE,
int dodma;
int dmatogo;
+ bool irq_disabled;
+ bool irq_enabled;
+ bool irq_state;
+ int sdio_irqen;
+
struct mmc_request *mrq;
int cmd_is_stop;
unsigned int ccnt, dcnt;
struct tasklet_struct pio_tasklet;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debug_root;
+ struct dentry *debug_state;
+ struct dentry *debug_regs;
+#endif
+
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
#endif
config MTD_OF_PARTS
tristate "Flash partition map based on OF description"
- depends on PPC_OF && MTD_PARTITIONS
+ depends on (MICROBLAZE || PPC_OF) && MTD_PARTITIONS
help
This provides a partition parsing function which derives
the partition map from the children of the flash node,
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/math64.h>
+#include <linux/sched.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
config MTD_PHYSMAP_OF
tristate "Flash device in physical memory map based on OF description"
- depends on PPC_OF && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
+ depends on (MICROBLAZE || PPC_OF) && (MTD_CFI || MTD_JEDECPROBE || MTD_ROM)
help
This provides a 'mapping' driver which allows the NOR Flash and
ROM driver code to communicate with chips which are mapped
spinlock_t queue_lock;
};
-static int blktrans_discard_request(struct request_queue *q,
- struct request *req)
-{
- req->cmd_type = REQ_TYPE_LINUX_BLOCK;
- req->cmd[0] = REQ_LB_OP_DISCARD;
- return 0;
-}
-
static int do_blktrans_request(struct mtd_blktrans_ops *tr,
struct mtd_blktrans_dev *dev,
struct request *req)
buf = req->buffer;
- if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
- req->cmd[0] == REQ_LB_OP_DISCARD)
- return tr->discard(dev, block, nsect);
-
if (!blk_fs_request(req))
return -EIO;
get_capacity(req->rq_disk))
return -EIO;
+ if (blk_discard_rq(req))
+ return tr->discard(dev, block, nsect);
+
switch(rq_data_dir(req)) {
case READ:
for (; nsect > 0; nsect--, block++, buf += tr->blksize)
tr->blkcore_priv->rq->queuedata = tr;
blk_queue_logical_block_size(tr->blkcore_priv->rq, tr->blksize);
if (tr->discard)
- blk_queue_set_discard(tr->blkcore_priv->rq,
- blktrans_discard_request);
+ queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+ tr->blkcore_priv->rq);
tr->blkshift = ffs(tr->blksize) - 1;
#include <linux/log2.h>
#include <linux/kthread.h>
#include <linux/reboot.h>
+#include <linux/kernel.h>
#include "ubi.h"
/* Maximum length of the 'mtd=' parameter */
unsigned long result;
result = simple_strtoul(str, &endp, 0);
- if (str == endp || result < 0) {
+ if (str == endp || result >= INT_MAX) {
printk(KERN_ERR "UBI error: incorrect bytes count: \"%s\"\n",
str);
return -EINVAL;
* number.
*/
image_seq = be32_to_cpu(ech->image_seq);
- if (!si->image_seq_set) {
+ if (!ubi->image_seq && image_seq)
ubi->image_seq = image_seq;
- si->image_seq_set = 1;
- } else if (ubi->image_seq && ubi->image_seq != image_seq) {
+ if (ubi->image_seq && image_seq &&
+ ubi->image_seq != image_seq) {
ubi_err("bad image sequence number %d in PEB %d, "
"expected %d", image_seq, pnum, ubi->image_seq);
ubi_dbg_dump_ec_hdr(ech);
return -EINVAL;
}
-
}
/* OK, we've done with the EC header, let's look at the VID header */
* @ec_sum: a temporary variable used when calculating @mean_ec
* @ec_count: a temporary variable used when calculating @mean_ec
* @corr_count: count of corrupted PEBs
- * @image_seq_set: indicates @ubi->image_seq is known
*
* This data structure contains the result of scanning and may be used by other
* UBI sub-systems to build final UBI data structures, further error-recovery
uint64_t ec_sum;
int ec_count;
int corr_count;
- int image_seq_set;
};
struct ubi_device;
#ifdef CONFIG_PM
-static int vortex_suspend(struct pci_dev *pdev, pm_message_t state)
+static int vortex_suspend(struct device *dev)
{
- struct net_device *dev = pci_get_drvdata(pdev);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *ndev = pci_get_drvdata(pdev);
+
+ if (!ndev || !netif_running(ndev))
+ return 0;
+
+ netif_device_detach(ndev);
+ vortex_down(ndev, 1);
- if (dev && netdev_priv(dev)) {
- if (netif_running(dev)) {
- netif_device_detach(dev);
- vortex_down(dev, 1);
- }
- pci_save_state(pdev);
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
- free_irq(dev->irq, dev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- }
return 0;
}
-static int vortex_resume(struct pci_dev *pdev)
+static int vortex_resume(struct device *dev)
{
- struct net_device *dev = pci_get_drvdata(pdev);
- struct vortex_private *vp = netdev_priv(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *ndev = pci_get_drvdata(pdev);
int err;
- if (dev && vp) {
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- err = pci_enable_device(pdev);
- if (err) {
- pr_warning("%s: Could not enable device\n",
- dev->name);
- return err;
- }
- pci_set_master(pdev);
- if (request_irq(dev->irq, vp->full_bus_master_rx ?
- &boomerang_interrupt : &vortex_interrupt, IRQF_SHARED, dev->name, dev)) {
- pr_warning("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
- pci_disable_device(pdev);
- return -EBUSY;
- }
- if (netif_running(dev)) {
- err = vortex_up(dev);
- if (err)
- return err;
- else
- netif_device_attach(dev);
- }
- }
+ if (!ndev || !netif_running(ndev))
+ return 0;
+
+ err = vortex_up(ndev);
+ if (err)
+ return err;
+
+ netif_device_attach(ndev);
+
return 0;
}
-#endif /* CONFIG_PM */
+static struct dev_pm_ops vortex_pm_ops = {
+ .suspend = vortex_suspend,
+ .resume = vortex_resume,
+ .freeze = vortex_suspend,
+ .thaw = vortex_resume,
+ .poweroff = vortex_suspend,
+ .restore = vortex_resume,
+};
+
+#define VORTEX_PM_OPS (&vortex_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define VORTEX_PM_OPS NULL
+
+#endif /* !CONFIG_PM */
#ifdef CONFIG_EISA
static struct eisa_device_id vortex_eisa_ids[] = {
.probe = vortex_init_one,
.remove = __devexit_p(vortex_remove_one),
.id_table = vortex_pci_tbl,
-#ifdef CONFIG_PM
- .suspend = vortex_suspend,
- .resume = vortex_resume,
-#endif
+ .driver.pm = VORTEX_PM_OPS,
};
/* These identify the driver base version and may not be removed. */
static char version[] =
-KERN_INFO DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
+DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver");
help
SPI driver for Micrel KS8851 SPI attached network chip.
+config KS8851_MLL
+ tristate "Micrel KS8851 MLL"
+ depends on HAS_IOMEM
+ select MII
+ help
+ This platform driver is for Micrel KS8851 Address/data bus
+ multiplexed network chip.
+
config VIA_RHINE
tristate "VIA Rhine support"
depends on NET_PCI && PCI
config FEC
bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
- depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35
+ depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 || ARCH_MX25
help
Say Y here if you want to use the built-in 10/100 Fast ethernet
controller on some Motorola ColdFire and Freescale i.MX processors.
To compile this driver as a module, choose M here. The module
will be called s6gmac.
+source "drivers/net/stmmac/Kconfig"
+
endif # NETDEV_1000
#
This is the virtual network driver for virtio. It can be used with
lguest or QEMU based VMMs (like KVM or Xen). Say Y or M.
+config VMXNET3
+ tristate "VMware VMXNET3 ethernet driver"
+ depends on PCI && X86 && INET
+ help
+ This driver supports VMware's vmxnet3 virtual ethernet NIC.
+ To compile this driver as a module, choose M here: the
+ module will be called vmxnet3.
+
endif # NETDEVICES
# Makefile for the Linux network (ethercard) device drivers.
#
+obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
+obj-$(CONFIG_PHYLIB) += phy/
+
obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
obj-$(CONFIG_E1000) += e1000/
obj-$(CONFIG_ENIC) += enic/
obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_BE2NET) += benet/
+obj-$(CONFIG_VMXNET3) += vmxnet3/
gianfar_driver-objs := gianfar.o \
gianfar_ethtool.o \
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_KS8842) += ks8842.o
obj-$(CONFIG_KS8851) += ks8851.o
+obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_VIA_RHINE) += via-rhine.o
obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
obj-$(CONFIG_SH_ETH) += sh_eth.o
+obj-$(CONFIG_STMMAC_ETH) += stmmac/
#
# end link order section
#
-obj-$(CONFIG_MII) += mii.o
-obj-$(CONFIG_MDIO) += mdio.o
-obj-$(CONFIG_PHYLIB) += phy/
-
obj-$(CONFIG_SUNDANCE) += sundance.o
obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
memset(ap->info, 0, sizeof(struct ace_info));
memset(ap->skb, 0, sizeof(struct ace_skb));
- if (ace_load_firmware(dev))
+ ecode = ace_load_firmware(dev);
+ if (ecode)
goto init_error;
ap->fw_running = 0;
u32 ctrl;
u32 mac_ctrl_data;
u32 master_ctrl_data;
- u32 wol_ctrl_data;
+ u32 wol_ctrl_data = 0;
u16 mii_bmsr_data;
u16 save_autoneg_advertised;
u16 mii_intr_status_data;
*
*
*/
+#include <linux/capability.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/kernel.h>
ps->rx_errors++;
if (status & RX_MISSED_FRAME)
ps->rx_missed_errors++;
- if (status & (RX_OVERLEN | RX_OVERLEN | RX_LEN_ERROR))
+ if (status & (RX_OVERLEN | RX_RUNT | RX_LEN_ERROR))
ps->rx_length_errors++;
if (status & RX_CRC_ERROR)
ps->rx_crc_errors++;
printk("rx len error\n");
if (status & RX_U_CNTRL_FRAME)
printk("rx u control frame\n");
- if (status & RX_MISSED_FRAME)
- printk("rx miss\n");
}
}
prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE);
if (enet_readl(priv, ENET_IR_REG) & ENET_IR_MII)
break;
udelay(1);
- } while (limit-- >= 0);
+ } while (limit-- > 0);
return (limit < 0) ? 1 : 0;
}
bool link_up;
u32 port_num;
bool promiscuous;
+ u32 cap;
};
extern const struct ethtool_ops be_ethtool_ops;
int be_cmd_POST(struct be_adapter *adapter)
{
- u16 stage, error;
+ u16 stage;
+ int status, timeout = 0;
- error = be_POST_stage_get(adapter, &stage);
- if (error || stage != POST_STAGE_ARMFW_RDY) {
- dev_err(&adapter->pdev->dev, "POST failed.\n");
- return -1;
- }
+ do {
+ status = be_POST_stage_get(adapter, &stage);
+ if (status) {
+ dev_err(&adapter->pdev->dev, "POST error; stage=0x%x\n",
+ stage);
+ return -1;
+ } else if (stage != POST_STAGE_ARMFW_RDY) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(2 * HZ);
+ timeout += 2;
+ } else {
+ return 0;
+ }
+ } while (timeout < 20);
- return 0;
+ dev_err(&adapter->pdev->dev, "POST timeout; stage=0x%x\n", stage);
+ return -1;
}
static inline void *embedded_payload(struct be_mcc_wrb *wrb)
/* Create an rx filtering policy configuration on an i/f
* Uses mbox
*/
-int be_cmd_if_create(struct be_adapter *adapter, u32 flags, u8 *mac,
- bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
+int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags, u32 en_flags,
+ u8 *mac, bool pmac_invalid, u32 *if_handle, u32 *pmac_id)
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_if_create *req;
be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
OPCODE_COMMON_NTWK_INTERFACE_CREATE, sizeof(*req));
- req->capability_flags = cpu_to_le32(flags);
- req->enable_flags = cpu_to_le32(flags);
+ req->capability_flags = cpu_to_le32(cap_flags);
+ req->enable_flags = cpu_to_le32(en_flags);
req->pmac_invalid = pmac_invalid;
if (!pmac_invalid)
memcpy(req->mac_addr, mac, ETH_ALEN);
}
/* Uses mbox */
-int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num)
+int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num, u32 *cap)
{
struct be_mcc_wrb *wrb;
struct be_cmd_req_query_fw_cfg *req;
if (!status) {
struct be_cmd_resp_query_fw_cfg *resp = embedded_payload(wrb);
*port_num = le32_to_cpu(resp->phys_port);
+ *cap = le32_to_cpu(resp->function_cap);
}
spin_unlock(&adapter->mbox_lock);
spin_lock_bh(&adapter->mcc_lock);
wrb = wrb_from_mccq(adapter);
- req = embedded_payload(wrb);
sge = nonembedded_sgl(wrb);
be_wrb_hdr_prepare(wrb, cmd->size, false, 1);
MCC_STATUS_QUEUE_FLUSHING = 0x4,
/* The command is completing with a DMA error */
MCC_STATUS_DMA_FAILED = 0x5,
- MCC_STATUS_NOT_SUPPORTED = 0x66
+ MCC_STATUS_NOT_SUPPORTED = 66
};
#define CQE_STATUS_COMPL_MASK 0xFFFF
extern int be_cmd_pmac_add(struct be_adapter *adapter, u8 *mac_addr,
u32 if_id, u32 *pmac_id);
extern int be_cmd_pmac_del(struct be_adapter *adapter, u32 if_id, u32 pmac_id);
-extern int be_cmd_if_create(struct be_adapter *adapter, u32 if_flags, u8 *mac,
- bool pmac_invalid, u32 *if_handle, u32 *pmac_id);
+extern int be_cmd_if_create(struct be_adapter *adapter, u32 cap_flags,
+ u32 en_flags, u8 *mac, bool pmac_invalid,
+ u32 *if_handle, u32 *pmac_id);
extern int be_cmd_if_destroy(struct be_adapter *adapter, u32 if_handle);
extern int be_cmd_eq_create(struct be_adapter *adapter,
struct be_queue_info *eq, int eq_delay);
u32 tx_fc, u32 rx_fc);
extern int be_cmd_get_flow_control(struct be_adapter *adapter,
u32 *tx_fc, u32 *rx_fc);
-extern int be_cmd_query_fw_cfg(struct be_adapter *adapter, u32 *port_num);
+extern int be_cmd_query_fw_cfg(struct be_adapter *adapter,
+ u32 *port_num, u32 *cap);
extern int be_cmd_reset_function(struct be_adapter *adapter);
extern int be_process_mcc(struct be_adapter *adapter);
extern int be_cmd_write_flashrom(struct be_adapter *adapter,
.get_rx_csum = be_get_rx_csum,
.set_rx_csum = be_set_rx_csum,
.get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
.get_tso = ethtool_op_get_tso,
/* no space available in linux */
dev_stats->tx_dropped = 0;
- dev_stats->multicast = port_stats->tx_multicastframes;
+ dev_stats->multicast = port_stats->rx_multicast_frames;
dev_stats->collisions = 0;
/* detailed tx_errors */
struct be_eth_rx_compl *rxcp)
{
struct sk_buff *skb;
- u32 vtp, vid;
+ u32 vlanf, vid;
+ u8 vtm;
- vtp = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+ vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
+ vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp);
+
+ /* vlanf could be wrongly set in some cards.
+ * ignore if vtm is not set */
+ if ((adapter->cap == 0x400) && !vtm)
+ vlanf = 0;
skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
if (!skb) {
skb->protocol = eth_type_trans(skb, adapter->netdev);
skb->dev = adapter->netdev;
- if (vtp) {
+ if (vlanf) {
if (!adapter->vlan_grp || adapter->num_vlans == 0) {
kfree_skb(skb);
return;
struct be_eq_obj *eq_obj = &adapter->rx_eq;
u32 num_rcvd, pkt_size, remaining, vlanf, curr_frag_len;
u16 i, rxq_idx = 0, vid, j;
+ u8 vtm;
num_rcvd = AMAP_GET_BITS(struct amap_eth_rx_compl, numfrags, rxcp);
pkt_size = AMAP_GET_BITS(struct amap_eth_rx_compl, pktsize, rxcp);
vlanf = AMAP_GET_BITS(struct amap_eth_rx_compl, vtp, rxcp);
rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
+ vtm = AMAP_GET_BITS(struct amap_eth_rx_compl, vtm, rxcp);
+
+ /* vlanf could be wrongly set in some cards.
+ * ignore if vtm is not set */
+ if ((adapter->cap == 0x400) && !vtm)
+ vlanf = 0;
skb = napi_get_frags(&eq_obj->napi);
if (!skb) {
static int be_setup(struct be_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- u32 if_flags;
+ u32 cap_flags, en_flags;
int status;
- if_flags = BE_IF_FLAGS_BROADCAST | BE_IF_FLAGS_PROMISCUOUS |
- BE_IF_FLAGS_MCAST_PROMISCUOUS | BE_IF_FLAGS_UNTAGGED |
- BE_IF_FLAGS_PASS_L3L4_ERRORS;
- status = be_cmd_if_create(adapter, if_flags, netdev->dev_addr,
- false/* pmac_invalid */, &adapter->if_handle,
- &adapter->pmac_id);
+ cap_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
+ BE_IF_FLAGS_MCAST_PROMISCUOUS |
+ BE_IF_FLAGS_PROMISCUOUS |
+ BE_IF_FLAGS_PASS_L3L4_ERRORS;
+ en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
+ BE_IF_FLAGS_PASS_L3L4_ERRORS;
+
+ status = be_cmd_if_create(adapter, cap_flags, en_flags,
+ netdev->dev_addr, false/* pmac_invalid */,
+ &adapter->if_handle, &adapter->pmac_id);
if (status != 0)
goto do_none;
-
status = be_tx_queues_create(adapter);
if (status != 0)
goto if_destroy;
struct be_adapter *adapter = netdev_priv(netdev);
netdev->features |= NETIF_F_SG | NETIF_F_HW_VLAN_RX | NETIF_F_TSO |
- NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM | NETIF_F_GRO;
+ NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER | NETIF_F_HW_CSUM |
+ NETIF_F_GRO;
netdev->flags |= IFF_MULTICAST;
if (status)
return status;
+ status = be_cmd_reset_function(adapter);
+ if (status)
+ return status;
+
status = be_cmd_get_fw_ver(adapter, adapter->fw_ver);
if (status)
return status;
- status = be_cmd_query_fw_cfg(adapter, &adapter->port_num);
+ status = be_cmd_query_fw_cfg(adapter,
+ &adapter->port_num, &adapter->cap);
return status;
}
if (status)
goto free_netdev;
- status = be_cmd_reset_function(adapter);
- if (status)
- goto ctrl_clean;
-
status = be_stats_init(adapter);
if (status)
goto ctrl_clean;
#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28)
#define BNX2_L2CTX_HOST_BDIDX 0x00000004
-#define BNX2_L2CTX_STATUSB_NUM_SHIFT 16
-#define BNX2_L2CTX_STATUSB_NUM(sb_id) \
- (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_STATUSB_NUM_SHIFT) : 0)
+#define BNX2_L2CTX_L5_STATUSB_NUM_SHIFT 16
+#define BNX2_L2CTX_L2_STATUSB_NUM_SHIFT 24
+#define BNX2_L2CTX_L5_STATUSB_NUM(sb_id) \
+ (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L5_STATUSB_NUM_SHIFT) : 0)
+#define BNX2_L2CTX_L2_STATUSB_NUM(sb_id) \
+ (((sb_id) > 0) ? (((sb_id) + 7) << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT) : 0)
#define BNX2_L2CTX_HOST_BSEQ 0x00000008
#define BNX2_L2CTX_NX_BSEQ 0x0000000c
#define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010
struct net_device *slave_dev, int reporting)
{
const struct net_device_ops *slave_ops = slave_dev->netdev_ops;
- static int (*ioctl)(struct net_device *, struct ifreq *, int);
+ int (*ioctl)(struct net_device *, struct ifreq *, int);
struct ifreq ifr;
struct mii_ioctl_data *mii;
if (skb->protocol == htons(ETH_P_IP)) {
return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
- (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count;
+ (data->h_dest[5] ^ data->h_source[5])) % count;
}
- return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+ return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*
}
- return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+ return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*
{
struct ethhdr *data = (struct ethhdr *)skb->data;
- return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
+ return (data->h_dest[5] ^ data->h_source[5]) % count;
}
/*-------------------------- Device entry points ----------------------------*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
+#include <linux/sched.h>
#include <linux/sysdev.h>
#include <linux/fs.h>
#include <linux/types.h>
": %s: Setting %s as primary slave.\n",
bond->dev->name, slave->dev->name);
bond->primary_slave = slave;
+ strcpy(bond->params.primary, slave->dev->name);
bond_select_active_slave(bond);
goto out;
}
CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
(http://www.ems-wuensche.de).
+config CAN_EMS_USB
+ tristate "EMS CPC-USB/ARM7 CAN/USB interface"
+ depends on USB && CAN_DEV
+ ---help---
+ This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+ from from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+
config CAN_KVASER_PCI
tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
depends on PCI && CAN_SJA1000
This driver is for the the PCIcanx and PCIcan cards (1, 2 or
4 channel) from Kvaser (http://www.kvaser.com).
+config CAN_AT91
+ tristate "Atmel AT91 onchip CAN controller"
+ depends on CAN && CAN_DEV && ARCH_AT91SAM9263
+ ---help---
+ This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
+
config CAN_DEBUG_DEVICES
bool "CAN devices debugging messages"
depends on CAN
obj-$(CONFIG_CAN_DEV) += can-dev.o
can-dev-y := dev.o
+obj-y += usb/
+
obj-$(CONFIG_CAN_SJA1000) += sja1000/
+obj-$(CONFIG_CAN_AT91) += at91_can.o
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
--- /dev/null
+/*
+ * at91_can.c - CAN network driver for AT91 SoC CAN controller
+ *
+ * (C) 2007 by Hans J. Koch <hjk@linutronix.de>
+ * (C) 2008, 2009 by Marc Kleine-Budde <kernel@pengutronix.de>
+ *
+ * This software may be distributed under the terms of the GNU General
+ * Public License ("GPL") version 2 as distributed in the 'COPYING'
+ * file from the main directory of the linux kernel source.
+ *
+ * Send feedback to <socketcan-users@lists.berlios.de>
+ *
+ *
+ * Your platform definition file should specify something like:
+ *
+ * static struct at91_can_data ek_can_data = {
+ * transceiver_switch = sam9263ek_transceiver_switch,
+ * };
+ *
+ * at91_add_device_can(&ek_can_data);
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/if_arp.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#include <mach/board.h>
+
+#define DRV_NAME "at91_can"
+#define AT91_NAPI_WEIGHT 12
+
+/*
+ * RX/TX Mailbox split
+ * don't dare to touch
+ */
+#define AT91_MB_RX_NUM 12
+#define AT91_MB_TX_SHIFT 2
+
+#define AT91_MB_RX_FIRST 0
+#define AT91_MB_RX_LAST (AT91_MB_RX_FIRST + AT91_MB_RX_NUM - 1)
+
+#define AT91_MB_RX_MASK(i) ((1 << (i)) - 1)
+#define AT91_MB_RX_SPLIT 8
+#define AT91_MB_RX_LOW_LAST (AT91_MB_RX_SPLIT - 1)
+#define AT91_MB_RX_LOW_MASK (AT91_MB_RX_MASK(AT91_MB_RX_SPLIT))
+
+#define AT91_MB_TX_NUM (1 << AT91_MB_TX_SHIFT)
+#define AT91_MB_TX_FIRST (AT91_MB_RX_LAST + 1)
+#define AT91_MB_TX_LAST (AT91_MB_TX_FIRST + AT91_MB_TX_NUM - 1)
+
+#define AT91_NEXT_PRIO_SHIFT (AT91_MB_TX_SHIFT)
+#define AT91_NEXT_PRIO_MASK (0xf << AT91_MB_TX_SHIFT)
+#define AT91_NEXT_MB_MASK (AT91_MB_TX_NUM - 1)
+#define AT91_NEXT_MASK ((AT91_MB_TX_NUM - 1) | AT91_NEXT_PRIO_MASK)
+
+/* Common registers */
+enum at91_reg {
+ AT91_MR = 0x000,
+ AT91_IER = 0x004,
+ AT91_IDR = 0x008,
+ AT91_IMR = 0x00C,
+ AT91_SR = 0x010,
+ AT91_BR = 0x014,
+ AT91_TIM = 0x018,
+ AT91_TIMESTP = 0x01C,
+ AT91_ECR = 0x020,
+ AT91_TCR = 0x024,
+ AT91_ACR = 0x028,
+};
+
+/* Mailbox registers (0 <= i <= 15) */
+#define AT91_MMR(i) (enum at91_reg)(0x200 + ((i) * 0x20))
+#define AT91_MAM(i) (enum at91_reg)(0x204 + ((i) * 0x20))
+#define AT91_MID(i) (enum at91_reg)(0x208 + ((i) * 0x20))
+#define AT91_MFID(i) (enum at91_reg)(0x20C + ((i) * 0x20))
+#define AT91_MSR(i) (enum at91_reg)(0x210 + ((i) * 0x20))
+#define AT91_MDL(i) (enum at91_reg)(0x214 + ((i) * 0x20))
+#define AT91_MDH(i) (enum at91_reg)(0x218 + ((i) * 0x20))
+#define AT91_MCR(i) (enum at91_reg)(0x21C + ((i) * 0x20))
+
+/* Register bits */
+#define AT91_MR_CANEN BIT(0)
+#define AT91_MR_LPM BIT(1)
+#define AT91_MR_ABM BIT(2)
+#define AT91_MR_OVL BIT(3)
+#define AT91_MR_TEOF BIT(4)
+#define AT91_MR_TTM BIT(5)
+#define AT91_MR_TIMFRZ BIT(6)
+#define AT91_MR_DRPT BIT(7)
+
+#define AT91_SR_RBSY BIT(29)
+
+#define AT91_MMR_PRIO_SHIFT (16)
+
+#define AT91_MID_MIDE BIT(29)
+
+#define AT91_MSR_MRTR BIT(20)
+#define AT91_MSR_MABT BIT(22)
+#define AT91_MSR_MRDY BIT(23)
+#define AT91_MSR_MMI BIT(24)
+
+#define AT91_MCR_MRTR BIT(20)
+#define AT91_MCR_MTCR BIT(23)
+
+/* Mailbox Modes */
+enum at91_mb_mode {
+ AT91_MB_MODE_DISABLED = 0,
+ AT91_MB_MODE_RX = 1,
+ AT91_MB_MODE_RX_OVRWR = 2,
+ AT91_MB_MODE_TX = 3,
+ AT91_MB_MODE_CONSUMER = 4,
+ AT91_MB_MODE_PRODUCER = 5,
+};
+
+/* Interrupt mask bits */
+#define AT91_IRQ_MB_RX ((1 << (AT91_MB_RX_LAST + 1)) \
+ - (1 << AT91_MB_RX_FIRST))
+#define AT91_IRQ_MB_TX ((1 << (AT91_MB_TX_LAST + 1)) \
+ - (1 << AT91_MB_TX_FIRST))
+#define AT91_IRQ_MB_ALL (AT91_IRQ_MB_RX | AT91_IRQ_MB_TX)
+
+#define AT91_IRQ_ERRA (1 << 16)
+#define AT91_IRQ_WARN (1 << 17)
+#define AT91_IRQ_ERRP (1 << 18)
+#define AT91_IRQ_BOFF (1 << 19)
+#define AT91_IRQ_SLEEP (1 << 20)
+#define AT91_IRQ_WAKEUP (1 << 21)
+#define AT91_IRQ_TOVF (1 << 22)
+#define AT91_IRQ_TSTP (1 << 23)
+#define AT91_IRQ_CERR (1 << 24)
+#define AT91_IRQ_SERR (1 << 25)
+#define AT91_IRQ_AERR (1 << 26)
+#define AT91_IRQ_FERR (1 << 27)
+#define AT91_IRQ_BERR (1 << 28)
+
+#define AT91_IRQ_ERR_ALL (0x1fff0000)
+#define AT91_IRQ_ERR_FRAME (AT91_IRQ_CERR | AT91_IRQ_SERR | \
+ AT91_IRQ_AERR | AT91_IRQ_FERR | AT91_IRQ_BERR)
+#define AT91_IRQ_ERR_LINE (AT91_IRQ_ERRA | AT91_IRQ_WARN | \
+ AT91_IRQ_ERRP | AT91_IRQ_BOFF)
+
+#define AT91_IRQ_ALL (0x1fffffff)
+
+struct at91_priv {
+ struct can_priv can; /* must be the first member! */
+ struct net_device *dev;
+ struct napi_struct napi;
+
+ void __iomem *reg_base;
+
+ u32 reg_sr;
+ unsigned int tx_next;
+ unsigned int tx_echo;
+ unsigned int rx_next;
+
+ struct clk *clk;
+ struct at91_can_data *pdata;
+};
+
+static struct can_bittiming_const at91_bittiming_const = {
+ .tseg1_min = 4,
+ .tseg1_max = 16,
+ .tseg2_min = 2,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 2,
+ .brp_max = 128,
+ .brp_inc = 1,
+};
+
+static inline int get_tx_next_mb(const struct at91_priv *priv)
+{
+ return (priv->tx_next & AT91_NEXT_MB_MASK) + AT91_MB_TX_FIRST;
+}
+
+static inline int get_tx_next_prio(const struct at91_priv *priv)
+{
+ return (priv->tx_next >> AT91_NEXT_PRIO_SHIFT) & 0xf;
+}
+
+static inline int get_tx_echo_mb(const struct at91_priv *priv)
+{
+ return (priv->tx_echo & AT91_NEXT_MB_MASK) + AT91_MB_TX_FIRST;
+}
+
+static inline u32 at91_read(const struct at91_priv *priv, enum at91_reg reg)
+{
+ return readl(priv->reg_base + reg);
+}
+
+static inline void at91_write(const struct at91_priv *priv, enum at91_reg reg,
+ u32 value)
+{
+ writel(value, priv->reg_base + reg);
+}
+
+static inline void set_mb_mode_prio(const struct at91_priv *priv,
+ unsigned int mb, enum at91_mb_mode mode, int prio)
+{
+ at91_write(priv, AT91_MMR(mb), (mode << 24) | (prio << 16));
+}
+
+static inline void set_mb_mode(const struct at91_priv *priv, unsigned int mb,
+ enum at91_mb_mode mode)
+{
+ set_mb_mode_prio(priv, mb, mode, 0);
+}
+
+static struct sk_buff *alloc_can_skb(struct net_device *dev,
+ struct can_frame **cf)
+{
+ struct sk_buff *skb;
+
+ skb = netdev_alloc_skb(dev, sizeof(struct can_frame));
+ if (unlikely(!skb))
+ return NULL;
+
+ skb->protocol = htons(ETH_P_CAN);
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ *cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+
+ return skb;
+}
+
+static struct sk_buff *alloc_can_err_skb(struct net_device *dev,
+ struct can_frame **cf)
+{
+ struct sk_buff *skb;
+
+ skb = alloc_can_skb(dev, cf);
+ if (unlikely(!skb))
+ return NULL;
+
+ memset(*cf, 0, sizeof(struct can_frame));
+ (*cf)->can_id = CAN_ERR_FLAG;
+ (*cf)->can_dlc = CAN_ERR_DLC;
+
+ return skb;
+}
+
+/*
+ * Swtich transceiver on or off
+ */
+static void at91_transceiver_switch(const struct at91_priv *priv, int on)
+{
+ if (priv->pdata && priv->pdata->transceiver_switch)
+ priv->pdata->transceiver_switch(on);
+}
+
+static void at91_setup_mailboxes(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ unsigned int i;
+
+ /*
+ * The first 12 mailboxes are used as a reception FIFO. The
+ * last mailbox is configured with overwrite option. The
+ * overwrite flag indicates a FIFO overflow.
+ */
+ for (i = AT91_MB_RX_FIRST; i < AT91_MB_RX_LAST; i++)
+ set_mb_mode(priv, i, AT91_MB_MODE_RX);
+ set_mb_mode(priv, AT91_MB_RX_LAST, AT91_MB_MODE_RX_OVRWR);
+
+ /* The last 4 mailboxes are used for transmitting. */
+ for (i = AT91_MB_TX_FIRST; i <= AT91_MB_TX_LAST; i++)
+ set_mb_mode_prio(priv, i, AT91_MB_MODE_TX, 0);
+
+ /* Reset tx and rx helper pointers */
+ priv->tx_next = priv->tx_echo = priv->rx_next = 0;
+}
+
+static int at91_set_bittiming(struct net_device *dev)
+{
+ const struct at91_priv *priv = netdev_priv(dev);
+ const struct can_bittiming *bt = &priv->can.bittiming;
+ u32 reg_br;
+
+ reg_br = ((priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) << 24) |
+ ((bt->brp - 1) << 16) | ((bt->sjw - 1) << 12) |
+ ((bt->prop_seg - 1) << 8) | ((bt->phase_seg1 - 1) << 4) |
+ ((bt->phase_seg2 - 1) << 0);
+
+ dev_info(dev->dev.parent, "writing AT91_BR: 0x%08x\n", reg_br);
+
+ at91_write(priv, AT91_BR, reg_br);
+
+ return 0;
+}
+
+static void at91_chip_start(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_mr, reg_ier;
+
+ /* disable interrupts */
+ at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
+
+ /* disable chip */
+ reg_mr = at91_read(priv, AT91_MR);
+ at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
+
+ at91_setup_mailboxes(dev);
+ at91_transceiver_switch(priv, 1);
+
+ /* enable chip */
+ at91_write(priv, AT91_MR, AT91_MR_CANEN);
+
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ /* Enable interrupts */
+ reg_ier = AT91_IRQ_MB_RX | AT91_IRQ_ERRP | AT91_IRQ_ERR_FRAME;
+ at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
+ at91_write(priv, AT91_IER, reg_ier);
+}
+
+static void at91_chip_stop(struct net_device *dev, enum can_state state)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_mr;
+
+ /* disable interrupts */
+ at91_write(priv, AT91_IDR, AT91_IRQ_ALL);
+
+ reg_mr = at91_read(priv, AT91_MR);
+ at91_write(priv, AT91_MR, reg_mr & ~AT91_MR_CANEN);
+
+ at91_transceiver_switch(priv, 0);
+ priv->can.state = state;
+}
+
+/*
+ * theory of operation:
+ *
+ * According to the datasheet priority 0 is the highest priority, 15
+ * is the lowest. If two mailboxes have the same priority level the
+ * message of the mailbox with the lowest number is sent first.
+ *
+ * We use the first TX mailbox (AT91_MB_TX_FIRST) with prio 0, then
+ * the next mailbox with prio 0, and so on, until all mailboxes are
+ * used. Then we start from the beginning with mailbox
+ * AT91_MB_TX_FIRST, but with prio 1, mailbox AT91_MB_TX_FIRST + 1
+ * prio 1. When we reach the last mailbox with prio 15, we have to
+ * stop sending, waiting for all messages to be delivered, then start
+ * again with mailbox AT91_MB_TX_FIRST prio 0.
+ *
+ * We use the priv->tx_next as counter for the next transmission
+ * mailbox, but without the offset AT91_MB_TX_FIRST. The lower bits
+ * encode the mailbox number, the upper 4 bits the mailbox priority:
+ *
+ * priv->tx_next = (prio << AT91_NEXT_PRIO_SHIFT) ||
+ * (mb - AT91_MB_TX_FIRST);
+ *
+ */
+static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &dev->stats;
+ struct can_frame *cf = (struct can_frame *)skb->data;
+ unsigned int mb, prio;
+ u32 reg_mid, reg_mcr;
+
+ mb = get_tx_next_mb(priv);
+ prio = get_tx_next_prio(priv);
+
+ if (unlikely(!(at91_read(priv, AT91_MSR(mb)) & AT91_MSR_MRDY))) {
+ netif_stop_queue(dev);
+
+ dev_err(dev->dev.parent,
+ "BUG! TX buffer full when queue awake!\n");
+ return NETDEV_TX_BUSY;
+ }
+
+ if (cf->can_id & CAN_EFF_FLAG)
+ reg_mid = (cf->can_id & CAN_EFF_MASK) | AT91_MID_MIDE;
+ else
+ reg_mid = (cf->can_id & CAN_SFF_MASK) << 18;
+
+ reg_mcr = ((cf->can_id & CAN_RTR_FLAG) ? AT91_MCR_MRTR : 0) |
+ (cf->can_dlc << 16) | AT91_MCR_MTCR;
+
+ /* disable MB while writing ID (see datasheet) */
+ set_mb_mode(priv, mb, AT91_MB_MODE_DISABLED);
+ at91_write(priv, AT91_MID(mb), reg_mid);
+ set_mb_mode_prio(priv, mb, AT91_MB_MODE_TX, prio);
+
+ at91_write(priv, AT91_MDL(mb), *(u32 *)(cf->data + 0));
+ at91_write(priv, AT91_MDH(mb), *(u32 *)(cf->data + 4));
+
+ /* This triggers transmission */
+ at91_write(priv, AT91_MCR(mb), reg_mcr);
+
+ stats->tx_bytes += cf->can_dlc;
+ dev->trans_start = jiffies;
+
+ /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
+ can_put_echo_skb(skb, dev, mb - AT91_MB_TX_FIRST);
+
+ /*
+ * we have to stop the queue and deliver all messages in case
+ * of a prio+mb counter wrap around. This is the case if
+ * tx_next buffer prio and mailbox equals 0.
+ *
+ * also stop the queue if next buffer is still in use
+ * (== not ready)
+ */
+ priv->tx_next++;
+ if (!(at91_read(priv, AT91_MSR(get_tx_next_mb(priv))) &
+ AT91_MSR_MRDY) ||
+ (priv->tx_next & AT91_NEXT_MASK) == 0)
+ netif_stop_queue(dev);
+
+ /* Enable interrupt for this mailbox */
+ at91_write(priv, AT91_IER, 1 << mb);
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * at91_activate_rx_low - activate lower rx mailboxes
+ * @priv: a91 context
+ *
+ * Reenables the lower mailboxes for reception of new CAN messages
+ */
+static inline void at91_activate_rx_low(const struct at91_priv *priv)
+{
+ u32 mask = AT91_MB_RX_LOW_MASK;
+ at91_write(priv, AT91_TCR, mask);
+}
+
+/**
+ * at91_activate_rx_mb - reactive single rx mailbox
+ * @priv: a91 context
+ * @mb: mailbox to reactivate
+ *
+ * Reenables given mailbox for reception of new CAN messages
+ */
+static inline void at91_activate_rx_mb(const struct at91_priv *priv,
+ unsigned int mb)
+{
+ u32 mask = 1 << mb;
+ at91_write(priv, AT91_TCR, mask);
+}
+
+/**
+ * at91_rx_overflow_err - send error frame due to rx overflow
+ * @dev: net device
+ */
+static void at91_rx_overflow_err(struct net_device *dev)
+{
+ struct net_device_stats *stats = &dev->stats;
+ struct sk_buff *skb;
+ struct can_frame *cf;
+
+ dev_dbg(dev->dev.parent, "RX buffer overflow\n");
+ stats->rx_over_errors++;
+ stats->rx_errors++;
+
+ skb = alloc_can_err_skb(dev, &cf);
+ if (unlikely(!skb))
+ return;
+
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+ netif_receive_skb(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+/**
+ * at91_read_mb - read CAN msg from mailbox (lowlevel impl)
+ * @dev: net device
+ * @mb: mailbox number to read from
+ * @cf: can frame where to store message
+ *
+ * Reads a CAN message from the given mailbox and stores data into
+ * given can frame. "mb" and "cf" must be valid.
+ */
+static void at91_read_mb(struct net_device *dev, unsigned int mb,
+ struct can_frame *cf)
+{
+ const struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_msr, reg_mid;
+
+ reg_mid = at91_read(priv, AT91_MID(mb));
+ if (reg_mid & AT91_MID_MIDE)
+ cf->can_id = ((reg_mid >> 0) & CAN_EFF_MASK) | CAN_EFF_FLAG;
+ else
+ cf->can_id = (reg_mid >> 18) & CAN_SFF_MASK;
+
+ reg_msr = at91_read(priv, AT91_MSR(mb));
+ if (reg_msr & AT91_MSR_MRTR)
+ cf->can_id |= CAN_RTR_FLAG;
+ cf->can_dlc = min_t(__u8, (reg_msr >> 16) & 0xf, 8);
+
+ *(u32 *)(cf->data + 0) = at91_read(priv, AT91_MDL(mb));
+ *(u32 *)(cf->data + 4) = at91_read(priv, AT91_MDH(mb));
+
+ if (unlikely(mb == AT91_MB_RX_LAST && reg_msr & AT91_MSR_MMI))
+ at91_rx_overflow_err(dev);
+}
+
+/**
+ * at91_read_msg - read CAN message from mailbox
+ * @dev: net device
+ * @mb: mail box to read from
+ *
+ * Reads a CAN message from given mailbox, and put into linux network
+ * RX queue, does all housekeeping chores (stats, ...)
+ */
+static void at91_read_msg(struct net_device *dev, unsigned int mb)
+{
+ struct net_device_stats *stats = &dev->stats;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+
+ skb = alloc_can_skb(dev, &cf);
+ if (unlikely(!skb)) {
+ stats->rx_dropped++;
+ return;
+ }
+
+ at91_read_mb(dev, mb, cf);
+ netif_receive_skb(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+/**
+ * at91_poll_rx - read multiple CAN messages from mailboxes
+ * @dev: net device
+ * @quota: max number of pkgs we're allowed to receive
+ *
+ * Theory of Operation:
+ *
+ * 12 of the 16 mailboxes on the chip are reserved for RX. we split
+ * them into 2 groups. The lower group holds 8 and upper 4 mailboxes.
+ *
+ * Like it or not, but the chip always saves a received CAN message
+ * into the first free mailbox it finds (starting with the
+ * lowest). This makes it very difficult to read the messages in the
+ * right order from the chip. This is how we work around that problem:
+ *
+ * The first message goes into mb nr. 0 and issues an interrupt. All
+ * rx ints are disabled in the interrupt handler and a napi poll is
+ * scheduled. We read the mailbox, but do _not_ reenable the mb (to
+ * receive another message).
+ *
+ * lower mbxs upper
+ * ______^______ __^__
+ * / \ / \
+ * +-+-+-+-+-+-+-+-++-+-+-+-+
+ * |x|x|x|x|x|x|x|x|| | | | |
+ * +-+-+-+-+-+-+-+-++-+-+-+-+
+ * 0 0 0 0 0 0 0 0 0 0 1 1 \ mail
+ * 0 1 2 3 4 5 6 7 8 9 0 1 / box
+ *
+ * The variable priv->rx_next points to the next mailbox to read a
+ * message from. As long we're in the lower mailboxes we just read the
+ * mailbox but not reenable it.
+ *
+ * With completion of the last of the lower mailboxes, we reenable the
+ * whole first group, but continue to look for filled mailboxes in the
+ * upper mailboxes. Imagine the second group like overflow mailboxes,
+ * which takes CAN messages if the lower goup is full. While in the
+ * upper group we reenable the mailbox right after reading it. Giving
+ * the chip more room to store messages.
+ *
+ * After finishing we look again in the lower group if we've still
+ * quota.
+ *
+ */
+static int at91_poll_rx(struct net_device *dev, int quota)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_sr = at91_read(priv, AT91_SR);
+ const unsigned long *addr = (unsigned long *)®_sr;
+ unsigned int mb;
+ int received = 0;
+
+ if (priv->rx_next > AT91_MB_RX_LOW_LAST &&
+ reg_sr & AT91_MB_RX_LOW_MASK)
+ dev_info(dev->dev.parent,
+ "order of incoming frames cannot be guaranteed\n");
+
+ again:
+ for (mb = find_next_bit(addr, AT91_MB_RX_NUM, priv->rx_next);
+ mb < AT91_MB_RX_NUM && quota > 0;
+ reg_sr = at91_read(priv, AT91_SR),
+ mb = find_next_bit(addr, AT91_MB_RX_NUM, ++priv->rx_next)) {
+ at91_read_msg(dev, mb);
+
+ /* reactivate mailboxes */
+ if (mb == AT91_MB_RX_LOW_LAST)
+ /* all lower mailboxed, if just finished it */
+ at91_activate_rx_low(priv);
+ else if (mb > AT91_MB_RX_LOW_LAST)
+ /* only the mailbox we read */
+ at91_activate_rx_mb(priv, mb);
+
+ received++;
+ quota--;
+ }
+
+ /* upper group completed, look again in lower */
+ if (priv->rx_next > AT91_MB_RX_LOW_LAST &&
+ quota > 0 && mb >= AT91_MB_RX_NUM) {
+ priv->rx_next = 0;
+ goto again;
+ }
+
+ return received;
+}
+
+static void at91_poll_err_frame(struct net_device *dev,
+ struct can_frame *cf, u32 reg_sr)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+
+ /* CRC error */
+ if (reg_sr & AT91_IRQ_CERR) {
+ dev_dbg(dev->dev.parent, "CERR irq\n");
+ dev->stats.rx_errors++;
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ }
+
+ /* Stuffing Error */
+ if (reg_sr & AT91_IRQ_SERR) {
+ dev_dbg(dev->dev.parent, "SERR irq\n");
+ dev->stats.rx_errors++;
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ }
+
+ /* Acknowledgement Error */
+ if (reg_sr & AT91_IRQ_AERR) {
+ dev_dbg(dev->dev.parent, "AERR irq\n");
+ dev->stats.tx_errors++;
+ cf->can_id |= CAN_ERR_ACK;
+ }
+
+ /* Form error */
+ if (reg_sr & AT91_IRQ_FERR) {
+ dev_dbg(dev->dev.parent, "FERR irq\n");
+ dev->stats.rx_errors++;
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ }
+
+ /* Bit Error */
+ if (reg_sr & AT91_IRQ_BERR) {
+ dev_dbg(dev->dev.parent, "BERR irq\n");
+ dev->stats.tx_errors++;
+ priv->can.can_stats.bus_error++;
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ cf->data[2] |= CAN_ERR_PROT_BIT;
+ }
+}
+
+static int at91_poll_err(struct net_device *dev, int quota, u32 reg_sr)
+{
+ struct sk_buff *skb;
+ struct can_frame *cf;
+
+ if (quota == 0)
+ return 0;
+
+ skb = alloc_can_err_skb(dev, &cf);
+ if (unlikely(!skb))
+ return 0;
+
+ at91_poll_err_frame(dev, cf, reg_sr);
+ netif_receive_skb(skb);
+
+ dev->last_rx = jiffies;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += cf->can_dlc;
+
+ return 1;
+}
+
+static int at91_poll(struct napi_struct *napi, int quota)
+{
+ struct net_device *dev = napi->dev;
+ const struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_sr = at91_read(priv, AT91_SR);
+ int work_done = 0;
+
+ if (reg_sr & AT91_IRQ_MB_RX)
+ work_done += at91_poll_rx(dev, quota - work_done);
+
+ /*
+ * The error bits are clear on read,
+ * so use saved value from irq handler.
+ */
+ reg_sr |= priv->reg_sr;
+ if (reg_sr & AT91_IRQ_ERR_FRAME)
+ work_done += at91_poll_err(dev, quota - work_done, reg_sr);
+
+ if (work_done < quota) {
+ /* enable IRQs for frame errors and all mailboxes >= rx_next */
+ u32 reg_ier = AT91_IRQ_ERR_FRAME;
+ reg_ier |= AT91_IRQ_MB_RX & ~AT91_MB_RX_MASK(priv->rx_next);
+
+ napi_complete(napi);
+ at91_write(priv, AT91_IER, reg_ier);
+ }
+
+ return work_done;
+}
+
+/*
+ * theory of operation:
+ *
+ * priv->tx_echo holds the number of the oldest can_frame put for
+ * transmission into the hardware, but not yet ACKed by the CAN tx
+ * complete IRQ.
+ *
+ * We iterate from priv->tx_echo to priv->tx_next and check if the
+ * packet has been transmitted, echo it back to the CAN framework. If
+ * we discover a not yet transmitted package, stop looking for more.
+ *
+ */
+static void at91_irq_tx(struct net_device *dev, u32 reg_sr)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_msr;
+ unsigned int mb;
+
+ /* masking of reg_sr not needed, already done by at91_irq */
+
+ for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
+ mb = get_tx_echo_mb(priv);
+
+ /* no event in mailbox? */
+ if (!(reg_sr & (1 << mb)))
+ break;
+
+ /* Disable irq for this TX mailbox */
+ at91_write(priv, AT91_IDR, 1 << mb);
+
+ /*
+ * only echo if mailbox signals us a transfer
+ * complete (MSR_MRDY). Otherwise it's a tansfer
+ * abort. "can_bus_off()" takes care about the skbs
+ * parked in the echo queue.
+ */
+ reg_msr = at91_read(priv, AT91_MSR(mb));
+ if (likely(reg_msr & AT91_MSR_MRDY &&
+ ~reg_msr & AT91_MSR_MABT)) {
+ /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
+ can_get_echo_skb(dev, mb - AT91_MB_TX_FIRST);
+ dev->stats.tx_packets++;
+ }
+ }
+
+ /*
+ * restart queue if we don't have a wrap around but restart if
+ * we get a TX int for the last can frame directly before a
+ * wrap around.
+ */
+ if ((priv->tx_next & AT91_NEXT_MASK) != 0 ||
+ (priv->tx_echo & AT91_NEXT_MASK) == 0)
+ netif_wake_queue(dev);
+}
+
+static void at91_irq_err_state(struct net_device *dev,
+ struct can_frame *cf, enum can_state new_state)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ u32 reg_idr, reg_ier, reg_ecr;
+ u8 tec, rec;
+
+ reg_ecr = at91_read(priv, AT91_ECR);
+ rec = reg_ecr & 0xff;
+ tec = reg_ecr >> 16;
+
+ switch (priv->can.state) {
+ case CAN_STATE_ERROR_ACTIVE:
+ /*
+ * from: ERROR_ACTIVE
+ * to : ERROR_WARNING, ERROR_PASSIVE, BUS_OFF
+ * => : there was a warning int
+ */
+ if (new_state >= CAN_STATE_ERROR_WARNING &&
+ new_state <= CAN_STATE_BUS_OFF) {
+ dev_dbg(dev->dev.parent, "Error Warning IRQ\n");
+ priv->can.can_stats.error_warning++;
+
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (tec > rec) ?
+ CAN_ERR_CRTL_TX_WARNING :
+ CAN_ERR_CRTL_RX_WARNING;
+ }
+ case CAN_STATE_ERROR_WARNING: /* fallthrough */
+ /*
+ * from: ERROR_ACTIVE, ERROR_WARNING
+ * to : ERROR_PASSIVE, BUS_OFF
+ * => : error passive int
+ */
+ if (new_state >= CAN_STATE_ERROR_PASSIVE &&
+ new_state <= CAN_STATE_BUS_OFF) {
+ dev_dbg(dev->dev.parent, "Error Passive IRQ\n");
+ priv->can.can_stats.error_passive++;
+
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (tec > rec) ?
+ CAN_ERR_CRTL_TX_PASSIVE :
+ CAN_ERR_CRTL_RX_PASSIVE;
+ }
+ break;
+ case CAN_STATE_BUS_OFF:
+ /*
+ * from: BUS_OFF
+ * to : ERROR_ACTIVE, ERROR_WARNING, ERROR_PASSIVE
+ */
+ if (new_state <= CAN_STATE_ERROR_PASSIVE) {
+ cf->can_id |= CAN_ERR_RESTARTED;
+
+ dev_dbg(dev->dev.parent, "restarted\n");
+ priv->can.can_stats.restarts++;
+
+ netif_carrier_on(dev);
+ netif_wake_queue(dev);
+ }
+ break;
+ default:
+ break;
+ }
+
+
+ /* process state changes depending on the new state */
+ switch (new_state) {
+ case CAN_STATE_ERROR_ACTIVE:
+ /*
+ * actually we want to enable AT91_IRQ_WARN here, but
+ * it screws up the system under certain
+ * circumstances. so just enable AT91_IRQ_ERRP, thus
+ * the "fallthrough"
+ */
+ dev_dbg(dev->dev.parent, "Error Active\n");
+ cf->can_id |= CAN_ERR_PROT;
+ cf->data[2] = CAN_ERR_PROT_ACTIVE;
+ case CAN_STATE_ERROR_WARNING: /* fallthrough */
+ reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_BOFF;
+ reg_ier = AT91_IRQ_ERRP;
+ break;
+ case CAN_STATE_ERROR_PASSIVE:
+ reg_idr = AT91_IRQ_ERRA | AT91_IRQ_WARN | AT91_IRQ_ERRP;
+ reg_ier = AT91_IRQ_BOFF;
+ break;
+ case CAN_STATE_BUS_OFF:
+ reg_idr = AT91_IRQ_ERRA | AT91_IRQ_ERRP |
+ AT91_IRQ_WARN | AT91_IRQ_BOFF;
+ reg_ier = 0;
+
+ cf->can_id |= CAN_ERR_BUSOFF;
+
+ dev_dbg(dev->dev.parent, "bus-off\n");
+ netif_carrier_off(dev);
+ priv->can.can_stats.bus_off++;
+
+ /* turn off chip, if restart is disabled */
+ if (!priv->can.restart_ms) {
+ at91_chip_stop(dev, CAN_STATE_BUS_OFF);
+ return;
+ }
+ break;
+ default:
+ break;
+ }
+
+ at91_write(priv, AT91_IDR, reg_idr);
+ at91_write(priv, AT91_IER, reg_ier);
+}
+
+static void at91_irq_err(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb;
+ struct can_frame *cf;
+ enum can_state new_state;
+ u32 reg_sr;
+
+ reg_sr = at91_read(priv, AT91_SR);
+
+ /* we need to look at the unmasked reg_sr */
+ if (unlikely(reg_sr & AT91_IRQ_BOFF))
+ new_state = CAN_STATE_BUS_OFF;
+ else if (unlikely(reg_sr & AT91_IRQ_ERRP))
+ new_state = CAN_STATE_ERROR_PASSIVE;
+ else if (unlikely(reg_sr & AT91_IRQ_WARN))
+ new_state = CAN_STATE_ERROR_WARNING;
+ else if (likely(reg_sr & AT91_IRQ_ERRA))
+ new_state = CAN_STATE_ERROR_ACTIVE;
+ else {
+ dev_err(dev->dev.parent, "BUG! hardware in undefined state\n");
+ return;
+ }
+
+ /* state hasn't changed */
+ if (likely(new_state == priv->can.state))
+ return;
+
+ skb = alloc_can_err_skb(dev, &cf);
+ if (unlikely(!skb))
+ return;
+
+ at91_irq_err_state(dev, cf, new_state);
+ netif_rx(skb);
+
+ dev->last_rx = jiffies;
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += cf->can_dlc;
+
+ priv->can.state = new_state;
+}
+
+/*
+ * interrupt handler
+ */
+static irqreturn_t at91_irq(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct at91_priv *priv = netdev_priv(dev);
+ irqreturn_t handled = IRQ_NONE;
+ u32 reg_sr, reg_imr;
+
+ reg_sr = at91_read(priv, AT91_SR);
+ reg_imr = at91_read(priv, AT91_IMR);
+
+ /* Ignore masked interrupts */
+ reg_sr &= reg_imr;
+ if (!reg_sr)
+ goto exit;
+
+ handled = IRQ_HANDLED;
+
+ /* Receive or error interrupt? -> napi */
+ if (reg_sr & (AT91_IRQ_MB_RX | AT91_IRQ_ERR_FRAME)) {
+ /*
+ * The error bits are clear on read,
+ * save for later use.
+ */
+ priv->reg_sr = reg_sr;
+ at91_write(priv, AT91_IDR,
+ AT91_IRQ_MB_RX | AT91_IRQ_ERR_FRAME);
+ napi_schedule(&priv->napi);
+ }
+
+ /* Transmission complete interrupt */
+ if (reg_sr & AT91_IRQ_MB_TX)
+ at91_irq_tx(dev, reg_sr);
+
+ at91_irq_err(dev);
+
+ exit:
+ return handled;
+}
+
+static int at91_open(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+ int err;
+
+ clk_enable(priv->clk);
+
+ /* check or determine and set bittime */
+ err = open_candev(dev);
+ if (err)
+ goto out;
+
+ /* register interrupt handler */
+ if (request_irq(dev->irq, at91_irq, IRQF_SHARED,
+ dev->name, dev)) {
+ err = -EAGAIN;
+ goto out_close;
+ }
+
+ /* start chip and queuing */
+ at91_chip_start(dev);
+ napi_enable(&priv->napi);
+ netif_start_queue(dev);
+
+ return 0;
+
+ out_close:
+ close_candev(dev);
+ out:
+ clk_disable(priv->clk);
+
+ return err;
+}
+
+/*
+ * stop CAN bus activity
+ */
+static int at91_close(struct net_device *dev)
+{
+ struct at91_priv *priv = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+ napi_disable(&priv->napi);
+ at91_chip_stop(dev, CAN_STATE_STOPPED);
+
+ free_irq(dev->irq, dev);
+ clk_disable(priv->clk);
+
+ close_candev(dev);
+
+ return 0;
+}
+
+static int at91_set_mode(struct net_device *dev, enum can_mode mode)
+{
+ switch (mode) {
+ case CAN_MODE_START:
+ at91_chip_start(dev);
+ netif_wake_queue(dev);
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static const struct net_device_ops at91_netdev_ops = {
+ .ndo_open = at91_open,
+ .ndo_stop = at91_close,
+ .ndo_start_xmit = at91_start_xmit,
+};
+
+static int __init at91_can_probe(struct platform_device *pdev)
+{
+ struct net_device *dev;
+ struct at91_priv *priv;
+ struct resource *res;
+ struct clk *clk;
+ void __iomem *addr;
+ int err, irq;
+
+ clk = clk_get(&pdev->dev, "can_clk");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "no clock defined\n");
+ err = -ENODEV;
+ goto exit;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!res || !irq) {
+ err = -ENODEV;
+ goto exit_put;
+ }
+
+ if (!request_mem_region(res->start,
+ resource_size(res),
+ pdev->name)) {
+ err = -EBUSY;
+ goto exit_put;
+ }
+
+ addr = ioremap_nocache(res->start, resource_size(res));
+ if (!addr) {
+ err = -ENOMEM;
+ goto exit_release;
+ }
+
+ dev = alloc_candev(sizeof(struct at91_priv));
+ if (!dev) {
+ err = -ENOMEM;
+ goto exit_iounmap;
+ }
+
+ dev->netdev_ops = &at91_netdev_ops;
+ dev->irq = irq;
+ dev->flags |= IFF_ECHO;
+
+ priv = netdev_priv(dev);
+ priv->can.clock.freq = clk_get_rate(clk);
+ priv->can.bittiming_const = &at91_bittiming_const;
+ priv->can.do_set_bittiming = at91_set_bittiming;
+ priv->can.do_set_mode = at91_set_mode;
+ priv->reg_base = addr;
+ priv->dev = dev;
+ priv->clk = clk;
+ priv->pdata = pdev->dev.platform_data;
+
+ netif_napi_add(dev, &priv->napi, at91_poll, AT91_NAPI_WEIGHT);
+
+ dev_set_drvdata(&pdev->dev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ err = register_candev(dev);
+ if (err) {
+ dev_err(&pdev->dev, "registering netdev failed\n");
+ goto exit_free;
+ }
+
+ dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%d)\n",
+ priv->reg_base, dev->irq);
+
+ return 0;
+
+ exit_free:
+ free_netdev(dev);
+ exit_iounmap:
+ iounmap(addr);
+ exit_release:
+ release_mem_region(res->start, resource_size(res));
+ exit_put:
+ clk_put(clk);
+ exit:
+ return err;
+}
+
+static int __devexit at91_can_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct at91_priv *priv = netdev_priv(dev);
+ struct resource *res;
+
+ unregister_netdev(dev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ free_netdev(dev);
+
+ iounmap(priv->reg_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+
+ clk_put(priv->clk);
+
+ return 0;
+}
+
+static struct platform_driver at91_can_driver = {
+ .probe = at91_can_probe,
+ .remove = __devexit_p(at91_can_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init at91_can_module_init(void)
+{
+ printk(KERN_INFO "%s netdevice driver\n", DRV_NAME);
+ return platform_driver_register(&at91_can_driver);
+}
+
+static void __exit at91_can_module_exit(void)
+{
+ platform_driver_unregister(&at91_can_driver);
+ printk(KERN_INFO "%s: driver removed\n", DRV_NAME);
+}
+
+module_init(at91_can_module_init);
+module_exit(at91_can_module_exit);
+
+MODULE_AUTHOR("Marc Kleine-Budde <mkl@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION(DRV_NAME " CAN netdevice driver");
#define EMS_PCI_CDR (CDR_CBP | CDR_CLKOUT_MASK)
#define EMS_PCI_V1_BASE_BAR 1
-#define EMS_PCI_V1_MEM_SIZE 4096
+#define EMS_PCI_V1_CONF_SIZE 4096 /* size of PITA control area */
#define EMS_PCI_V2_BASE_BAR 2
-#define EMS_PCI_V2_MEM_SIZE 128
+#define EMS_PCI_V2_CONF_SIZE 128 /* size of PLX control area */
#define EMS_PCI_CAN_BASE_OFFSET 0x400 /* offset where the controllers starts */
#define EMS_PCI_CAN_CTRL_SIZE 0x200 /* memory size for each controller */
+#define EMS_PCI_BASE_SIZE 4096 /* size of controller area */
+
static struct pci_device_id ems_pci_tbl[] = {
/* CPC-PCI v1 */
{PCI_VENDOR_ID_SIEMENS, 0x2104, PCI_ANY_ID, PCI_ANY_ID,},
struct sja1000_priv *priv;
struct net_device *dev;
struct ems_pci_card *card;
- int max_chan, mem_size, base_bar;
+ int max_chan, conf_size, base_bar;
int err, i;
/* Enabling PCI device */
card->version = 2; /* CPC-PCI v2 */
max_chan = EMS_PCI_V2_MAX_CHAN;
base_bar = EMS_PCI_V2_BASE_BAR;
- mem_size = EMS_PCI_V2_MEM_SIZE;
+ conf_size = EMS_PCI_V2_CONF_SIZE;
} else {
card->version = 1; /* CPC-PCI v1 */
max_chan = EMS_PCI_V1_MAX_CHAN;
base_bar = EMS_PCI_V1_BASE_BAR;
- mem_size = EMS_PCI_V1_MEM_SIZE;
+ conf_size = EMS_PCI_V1_CONF_SIZE;
}
/* Remap configuration space and controller memory area */
- card->conf_addr = pci_iomap(pdev, 0, mem_size);
+ card->conf_addr = pci_iomap(pdev, 0, conf_size);
if (card->conf_addr == NULL) {
err = -ENOMEM;
goto failure_cleanup;
}
- card->base_addr = pci_iomap(pdev, base_bar, mem_size);
+ card->base_addr = pci_iomap(pdev, base_bar, EMS_PCI_BASE_SIZE);
if (card->base_addr == NULL) {
err = -ENOMEM;
goto failure_cleanup;
{.compatible = "nxp,sja1000"},
{},
};
+MODULE_DEVICE_TABLE(of, sja1000_ofp_table);
static struct of_platform_driver sja1000_ofp_driver = {
.owner = THIS_MODULE,
--- /dev/null
+#
+# Makefile for the Linux Controller Area Network USB drivers.
+#
+
+obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
--- /dev/null
+/*
+ * CAN driver for EMS Dr. Thomas Wuensche CPC-USB/ARM7
+ *
+ * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+MODULE_AUTHOR("Sebastian Haas <haas@ems-wuensche.com>");
+MODULE_DESCRIPTION("CAN driver for EMS Dr. Thomas Wuensche CAN/USB interfaces");
+MODULE_LICENSE("GPL v2");
+
+/* Control-Values for CPC_Control() Command Subject Selection */
+#define CONTR_CAN_MESSAGE 0x04
+#define CONTR_CAN_STATE 0x0C
+#define CONTR_BUS_ERROR 0x1C
+
+/* Control Command Actions */
+#define CONTR_CONT_OFF 0
+#define CONTR_CONT_ON 1
+#define CONTR_ONCE 2
+
+/* Messages from CPC to PC */
+#define CPC_MSG_TYPE_CAN_FRAME 1 /* CAN data frame */
+#define CPC_MSG_TYPE_RTR_FRAME 8 /* CAN remote frame */
+#define CPC_MSG_TYPE_CAN_PARAMS 12 /* Actual CAN parameters */
+#define CPC_MSG_TYPE_CAN_STATE 14 /* CAN state message */
+#define CPC_MSG_TYPE_EXT_CAN_FRAME 16 /* Extended CAN data frame */
+#define CPC_MSG_TYPE_EXT_RTR_FRAME 17 /* Extended remote frame */
+#define CPC_MSG_TYPE_CONTROL 19 /* change interface behavior */
+#define CPC_MSG_TYPE_CONFIRM 20 /* command processed confirmation */
+#define CPC_MSG_TYPE_OVERRUN 21 /* overrun events */
+#define CPC_MSG_TYPE_CAN_FRAME_ERROR 23 /* detected bus errors */
+#define CPC_MSG_TYPE_ERR_COUNTER 25 /* RX/TX error counter */
+
+/* Messages from the PC to the CPC interface */
+#define CPC_CMD_TYPE_CAN_FRAME 1 /* CAN data frame */
+#define CPC_CMD_TYPE_CONTROL 3 /* control of interface behavior */
+#define CPC_CMD_TYPE_CAN_PARAMS 6 /* set CAN parameters */
+#define CPC_CMD_TYPE_RTR_FRAME 13 /* CAN remote frame */
+#define CPC_CMD_TYPE_CAN_STATE 14 /* CAN state message */
+#define CPC_CMD_TYPE_EXT_CAN_FRAME 15 /* Extended CAN data frame */
+#define CPC_CMD_TYPE_EXT_RTR_FRAME 16 /* Extended CAN remote frame */
+#define CPC_CMD_TYPE_CAN_EXIT 200 /* exit the CAN */
+
+#define CPC_CMD_TYPE_INQ_ERR_COUNTER 25 /* request the CAN error counters */
+#define CPC_CMD_TYPE_CLEAR_MSG_QUEUE 8 /* clear CPC_MSG queue */
+#define CPC_CMD_TYPE_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */
+
+#define CPC_CC_TYPE_SJA1000 2 /* Philips basic CAN controller */
+
+#define CPC_CAN_ECODE_ERRFRAME 0x01 /* Ecode type */
+
+/* Overrun types */
+#define CPC_OVR_EVENT_CAN 0x01
+#define CPC_OVR_EVENT_CANSTATE 0x02
+#define CPC_OVR_EVENT_BUSERROR 0x04
+
+/*
+ * If the CAN controller lost a message we indicate it with the highest bit
+ * set in the count field.
+ */
+#define CPC_OVR_HW 0x80
+
+/* Size of the "struct ems_cpc_msg" without the union */
+#define CPC_MSG_HEADER_LEN 11
+#define CPC_CAN_MSG_MIN_SIZE 5
+
+/* Define these values to match your devices */
+#define USB_CPCUSB_VENDOR_ID 0x12D6
+
+#define USB_CPCUSB_ARM7_PRODUCT_ID 0x0444
+
+/* Mode register NXP LPC2119/SJA1000 CAN Controller */
+#define SJA1000_MOD_NORMAL 0x00
+#define SJA1000_MOD_RM 0x01
+
+/* ECC register NXP LPC2119/SJA1000 CAN Controller */
+#define SJA1000_ECC_SEG 0x1F
+#define SJA1000_ECC_DIR 0x20
+#define SJA1000_ECC_ERR 0x06
+#define SJA1000_ECC_BIT 0x00
+#define SJA1000_ECC_FORM 0x40
+#define SJA1000_ECC_STUFF 0x80
+#define SJA1000_ECC_MASK 0xc0
+
+/* Status register content */
+#define SJA1000_SR_BS 0x80
+#define SJA1000_SR_ES 0x40
+
+#define SJA1000_DEFAULT_OUTPUT_CONTROL 0xDA
+
+/*
+ * The device actually uses a 16MHz clock to generate the CAN clock
+ * but it expects SJA1000 bit settings based on 8MHz (is internally
+ * converted).
+ */
+#define EMS_USB_ARM7_CLOCK 8000000
+
+/*
+ * CAN-Message representation in a CPC_MSG. Message object type is
+ * CPC_MSG_TYPE_CAN_FRAME or CPC_MSG_TYPE_RTR_FRAME or
+ * CPC_MSG_TYPE_EXT_CAN_FRAME or CPC_MSG_TYPE_EXT_RTR_FRAME.
+ */
+struct cpc_can_msg {
+ u32 id;
+ u8 length;
+ u8 msg[8];
+};
+
+/* Representation of the CAN parameters for the SJA1000 controller */
+struct cpc_sja1000_params {
+ u8 mode;
+ u8 acc_code0;
+ u8 acc_code1;
+ u8 acc_code2;
+ u8 acc_code3;
+ u8 acc_mask0;
+ u8 acc_mask1;
+ u8 acc_mask2;
+ u8 acc_mask3;
+ u8 btr0;
+ u8 btr1;
+ u8 outp_contr;
+};
+
+/* CAN params message representation */
+struct cpc_can_params {
+ u8 cc_type;
+
+ /* Will support M16C CAN controller in the future */
+ union {
+ struct cpc_sja1000_params sja1000;
+ } cc_params;
+};
+
+/* Structure for confirmed message handling */
+struct cpc_confirm {
+ u8 error; /* error code */
+};
+
+/* Structure for overrun conditions */
+struct cpc_overrun {
+ u8 event;
+ u8 count;
+};
+
+/* SJA1000 CAN errors (compatible to NXP LPC2119) */
+struct cpc_sja1000_can_error {
+ u8 ecc;
+ u8 rxerr;
+ u8 txerr;
+};
+
+/* structure for CAN error conditions */
+struct cpc_can_error {
+ u8 ecode;
+
+ struct {
+ u8 cc_type;
+
+ /* Other controllers may also provide error code capture regs */
+ union {
+ struct cpc_sja1000_can_error sja1000;
+ } regs;
+ } cc;
+};
+
+/*
+ * Structure containing RX/TX error counter. This structure is used to request
+ * the values of the CAN controllers TX and RX error counter.
+ */
+struct cpc_can_err_counter {
+ u8 rx;
+ u8 tx;
+};
+
+/* Main message type used between library and application */
+struct __attribute__ ((packed)) ems_cpc_msg {
+ u8 type; /* type of message */
+ u8 length; /* length of data within union 'msg' */
+ u8 msgid; /* confirmation handle */
+ u32 ts_sec; /* timestamp in seconds */
+ u32 ts_nsec; /* timestamp in nano seconds */
+
+ union {
+ u8 generic[64];
+ struct cpc_can_msg can_msg;
+ struct cpc_can_params can_params;
+ struct cpc_confirm confirmation;
+ struct cpc_overrun overrun;
+ struct cpc_can_error error;
+ struct cpc_can_err_counter err_counter;
+ u8 can_state;
+ } msg;
+};
+
+/*
+ * Table of devices that work with this driver
+ * NOTE: This driver supports only CPC-USB/ARM7 (LPC2119) yet.
+ */
+static struct usb_device_id ems_usb_table[] = {
+ {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_ARM7_PRODUCT_ID)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ems_usb_table);
+
+#define RX_BUFFER_SIZE 64
+#define CPC_HEADER_SIZE 4
+#define INTR_IN_BUFFER_SIZE 4
+
+#define MAX_RX_URBS 10
+#define MAX_TX_URBS CAN_ECHO_SKB_MAX
+
+struct ems_usb;
+
+struct ems_tx_urb_context {
+ struct ems_usb *dev;
+
+ u32 echo_index;
+ u8 dlc;
+};
+
+struct ems_usb {
+ struct can_priv can; /* must be the first member */
+ int open_time;
+
+ struct sk_buff *echo_skb[MAX_TX_URBS];
+
+ struct usb_device *udev;
+ struct net_device *netdev;
+
+ atomic_t active_tx_urbs;
+ struct usb_anchor tx_submitted;
+ struct ems_tx_urb_context tx_contexts[MAX_TX_URBS];
+
+ struct usb_anchor rx_submitted;
+
+ struct urb *intr_urb;
+
+ u8 *tx_msg_buffer;
+
+ u8 *intr_in_buffer;
+ unsigned int free_slots; /* remember number of available slots */
+
+ struct ems_cpc_msg active_params; /* active controller parameters */
+};
+
+static void ems_usb_read_interrupt_callback(struct urb *urb)
+{
+ struct ems_usb *dev = urb->context;
+ struct net_device *netdev = dev->netdev;
+ int err;
+
+ if (!netif_device_present(netdev))
+ return;
+
+ switch (urb->status) {
+ case 0:
+ dev->free_slots = dev->intr_in_buffer[1];
+ break;
+
+ case -ECONNRESET: /* unlink */
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ dev_info(netdev->dev.parent, "Rx interrupt aborted %d\n",
+ urb->status);
+ break;
+ }
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (err == -ENODEV)
+ netif_device_detach(netdev);
+ else if (err)
+ dev_err(netdev->dev.parent,
+ "failed resubmitting intr urb: %d\n", err);
+
+ return;
+}
+
+static void ems_usb_rx_can_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ int i;
+ struct net_device_stats *stats = &dev->netdev->stats;
+
+ skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+ if (skb == NULL)
+ return;
+
+ skb->protocol = htons(ETH_P_CAN);
+
+ cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+
+ cf->can_id = msg->msg.can_msg.id;
+ cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
+
+ if (msg->type == CPC_MSG_TYPE_EXT_CAN_FRAME
+ || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME)
+ cf->can_id |= CAN_EFF_FLAG;
+
+ if (msg->type == CPC_MSG_TYPE_RTR_FRAME
+ || msg->type == CPC_MSG_TYPE_EXT_RTR_FRAME) {
+ cf->can_id |= CAN_RTR_FLAG;
+ } else {
+ for (i = 0; i < cf->can_dlc; i++)
+ cf->data[i] = msg->msg.can_msg.msg[i];
+ }
+
+ netif_rx(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ struct net_device_stats *stats = &dev->netdev->stats;
+
+ skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+ if (skb == NULL)
+ return;
+
+ skb->protocol = htons(ETH_P_CAN);
+
+ cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+ memset(cf, 0, sizeof(struct can_frame));
+
+ cf->can_id = CAN_ERR_FLAG;
+ cf->can_dlc = CAN_ERR_DLC;
+
+ if (msg->type == CPC_MSG_TYPE_CAN_STATE) {
+ u8 state = msg->msg.can_state;
+
+ if (state & SJA1000_SR_BS) {
+ dev->can.state = CAN_STATE_BUS_OFF;
+ cf->can_id |= CAN_ERR_BUSOFF;
+
+ can_bus_off(dev->netdev);
+ } else if (state & SJA1000_SR_ES) {
+ dev->can.state = CAN_STATE_ERROR_WARNING;
+ dev->can.can_stats.error_warning++;
+ } else {
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+ dev->can.can_stats.error_passive++;
+ }
+ } else if (msg->type == CPC_MSG_TYPE_CAN_FRAME_ERROR) {
+ u8 ecc = msg->msg.error.cc.regs.sja1000.ecc;
+ u8 txerr = msg->msg.error.cc.regs.sja1000.txerr;
+ u8 rxerr = msg->msg.error.cc.regs.sja1000.rxerr;
+
+ /* bus error interrupt */
+ dev->can.can_stats.bus_error++;
+ stats->rx_errors++;
+
+ cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+
+ switch (ecc & SJA1000_ECC_MASK) {
+ case SJA1000_ECC_BIT:
+ cf->data[2] |= CAN_ERR_PROT_BIT;
+ break;
+ case SJA1000_ECC_FORM:
+ cf->data[2] |= CAN_ERR_PROT_FORM;
+ break;
+ case SJA1000_ECC_STUFF:
+ cf->data[2] |= CAN_ERR_PROT_STUFF;
+ break;
+ default:
+ cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+ cf->data[3] = ecc & SJA1000_ECC_SEG;
+ break;
+ }
+
+ /* Error occured during transmission? */
+ if ((ecc & SJA1000_ECC_DIR) == 0)
+ cf->data[2] |= CAN_ERR_PROT_TX;
+
+ if (dev->can.state == CAN_STATE_ERROR_WARNING ||
+ dev->can.state == CAN_STATE_ERROR_PASSIVE) {
+ cf->data[1] = (txerr > rxerr) ?
+ CAN_ERR_CRTL_TX_PASSIVE : CAN_ERR_CRTL_RX_PASSIVE;
+ }
+ } else if (msg->type == CPC_MSG_TYPE_OVERRUN) {
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
+
+ stats->rx_over_errors++;
+ stats->rx_errors++;
+ }
+
+ netif_rx(skb);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->can_dlc;
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void ems_usb_read_bulk_callback(struct urb *urb)
+{
+ struct ems_usb *dev = urb->context;
+ struct net_device *netdev;
+ int retval;
+
+ netdev = dev->netdev;
+
+ if (!netif_device_present(netdev))
+ return;
+
+ switch (urb->status) {
+ case 0: /* success */
+ break;
+
+ case -ENOENT:
+ return;
+
+ default:
+ dev_info(netdev->dev.parent, "Rx URB aborted (%d)\n",
+ urb->status);
+ goto resubmit_urb;
+ }
+
+ if (urb->actual_length > CPC_HEADER_SIZE) {
+ struct ems_cpc_msg *msg;
+ u8 *ibuf = urb->transfer_buffer;
+ u8 msg_count, again, start;
+
+ msg_count = ibuf[0] & ~0x80;
+ again = ibuf[0] & 0x80;
+
+ start = CPC_HEADER_SIZE;
+
+ while (msg_count) {
+ msg = (struct ems_cpc_msg *)&ibuf[start];
+
+ switch (msg->type) {
+ case CPC_MSG_TYPE_CAN_STATE:
+ /* Process CAN state changes */
+ ems_usb_rx_err(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_CAN_FRAME:
+ case CPC_MSG_TYPE_EXT_CAN_FRAME:
+ case CPC_MSG_TYPE_RTR_FRAME:
+ case CPC_MSG_TYPE_EXT_RTR_FRAME:
+ ems_usb_rx_can_msg(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_CAN_FRAME_ERROR:
+ /* Process errorframe */
+ ems_usb_rx_err(dev, msg);
+ break;
+
+ case CPC_MSG_TYPE_OVERRUN:
+ /* Message lost while receiving */
+ ems_usb_rx_err(dev, msg);
+ break;
+ }
+
+ start += CPC_MSG_HEADER_LEN + msg->length;
+ msg_count--;
+
+ if (start > urb->transfer_buffer_length) {
+ dev_err(netdev->dev.parent, "format error\n");
+ break;
+ }
+ }
+ }
+
+resubmit_urb:
+ usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2),
+ urb->transfer_buffer, RX_BUFFER_SIZE,
+ ems_usb_read_bulk_callback, dev);
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+
+ if (retval == -ENODEV)
+ netif_device_detach(netdev);
+ else if (retval)
+ dev_err(netdev->dev.parent,
+ "failed resubmitting read bulk urb: %d\n", retval);
+
+ return;
+}
+
+/*
+ * callback for bulk IN urb
+ */
+static void ems_usb_write_bulk_callback(struct urb *urb)
+{
+ struct ems_tx_urb_context *context = urb->context;
+ struct ems_usb *dev;
+ struct net_device *netdev;
+
+ BUG_ON(!context);
+
+ dev = context->dev;
+ netdev = dev->netdev;
+
+ /* free up our allocated buffer */
+ usb_buffer_free(urb->dev, urb->transfer_buffer_length,
+ urb->transfer_buffer, urb->transfer_dma);
+
+ atomic_dec(&dev->active_tx_urbs);
+
+ if (!netif_device_present(netdev))
+ return;
+
+ if (urb->status)
+ dev_info(netdev->dev.parent, "Tx URB aborted (%d)\n",
+ urb->status);
+
+ netdev->trans_start = jiffies;
+
+ /* transmission complete interrupt */
+ netdev->stats.tx_packets++;
+ netdev->stats.tx_bytes += context->dlc;
+
+ can_get_echo_skb(netdev, context->echo_index);
+
+ /* Release context */
+ context->echo_index = MAX_TX_URBS;
+
+ if (netif_queue_stopped(netdev))
+ netif_wake_queue(netdev);
+}
+
+/*
+ * Send the given CPC command synchronously
+ */
+static int ems_usb_command_msg(struct ems_usb *dev, struct ems_cpc_msg *msg)
+{
+ int actual_length;
+
+ /* Copy payload */
+ memcpy(&dev->tx_msg_buffer[CPC_HEADER_SIZE], msg,
+ msg->length + CPC_MSG_HEADER_LEN);
+
+ /* Clear header */
+ memset(&dev->tx_msg_buffer[0], 0, CPC_HEADER_SIZE);
+
+ return usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2),
+ &dev->tx_msg_buffer[0],
+ msg->length + CPC_MSG_HEADER_LEN + CPC_HEADER_SIZE,
+ &actual_length, 1000);
+}
+
+/*
+ * Change CAN controllers' mode register
+ */
+static int ems_usb_write_mode(struct ems_usb *dev, u8 mode)
+{
+ dev->active_params.msg.can_params.cc_params.sja1000.mode = mode;
+
+ return ems_usb_command_msg(dev, &dev->active_params);
+}
+
+/*
+ * Send a CPC_Control command to change behaviour when interface receives a CAN
+ * message, bus error or CAN state changed notifications.
+ */
+static int ems_usb_control_cmd(struct ems_usb *dev, u8 val)
+{
+ struct ems_cpc_msg cmd;
+
+ cmd.type = CPC_CMD_TYPE_CONTROL;
+ cmd.length = CPC_MSG_HEADER_LEN + 1;
+
+ cmd.msgid = 0;
+
+ cmd.msg.generic[0] = val;
+
+ return ems_usb_command_msg(dev, &cmd);
+}
+
+/*
+ * Start interface
+ */
+static int ems_usb_start(struct ems_usb *dev)
+{
+ struct net_device *netdev = dev->netdev;
+ int err, i;
+
+ dev->intr_in_buffer[0] = 0;
+ dev->free_slots = 15; /* initial size */
+
+ for (i = 0; i < MAX_RX_URBS; i++) {
+ struct urb *urb = NULL;
+ u8 *buf = NULL;
+
+ /* create a URB, and a buffer for it */
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ dev_err(netdev->dev.parent,
+ "No memory left for URBs\n");
+ return -ENOMEM;
+ }
+
+ buf = usb_buffer_alloc(dev->udev, RX_BUFFER_SIZE, GFP_KERNEL,
+ &urb->transfer_dma);
+ if (!buf) {
+ dev_err(netdev->dev.parent,
+ "No memory left for USB buffer\n");
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+
+ usb_fill_bulk_urb(urb, dev->udev, usb_rcvbulkpipe(dev->udev, 2),
+ buf, RX_BUFFER_SIZE,
+ ems_usb_read_bulk_callback, dev);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ usb_anchor_urb(urb, &dev->rx_submitted);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, RX_BUFFER_SIZE, buf,
+ urb->transfer_dma);
+ break;
+ }
+
+ /* Drop reference, USB core will take care of freeing it */
+ usb_free_urb(urb);
+ }
+
+ /* Did we submit any URBs */
+ if (i == 0) {
+ dev_warn(netdev->dev.parent, "couldn't setup read URBs\n");
+ return err;
+ }
+
+ /* Warn if we've couldn't transmit all the URBs */
+ if (i < MAX_RX_URBS)
+ dev_warn(netdev->dev.parent, "rx performance may be slow\n");
+
+ /* Setup and start interrupt URB */
+ usb_fill_int_urb(dev->intr_urb, dev->udev,
+ usb_rcvintpipe(dev->udev, 1),
+ dev->intr_in_buffer,
+ INTR_IN_BUFFER_SIZE,
+ ems_usb_read_interrupt_callback, dev, 1);
+
+ err = usb_submit_urb(dev->intr_urb, GFP_KERNEL);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "intr URB submit failed: %d\n",
+ err);
+
+ return err;
+ }
+
+ /* CPC-USB will transfer received message to host */
+ err = ems_usb_control_cmd(dev, CONTR_CAN_MESSAGE | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ /* CPC-USB will transfer CAN state changes to host */
+ err = ems_usb_control_cmd(dev, CONTR_CAN_STATE | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ /* CPC-USB will transfer bus errors to host */
+ err = ems_usb_control_cmd(dev, CONTR_BUS_ERROR | CONTR_CONT_ON);
+ if (err)
+ goto failed;
+
+ err = ems_usb_write_mode(dev, SJA1000_MOD_NORMAL);
+ if (err)
+ goto failed;
+
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ return 0;
+
+failed:
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "couldn't submit control: %d\n", err);
+
+ return err;
+}
+
+static void unlink_all_urbs(struct ems_usb *dev)
+{
+ int i;
+
+ usb_unlink_urb(dev->intr_urb);
+
+ usb_kill_anchored_urbs(&dev->rx_submitted);
+
+ usb_kill_anchored_urbs(&dev->tx_submitted);
+ atomic_set(&dev->active_tx_urbs, 0);
+
+ for (i = 0; i < MAX_TX_URBS; i++)
+ dev->tx_contexts[i].echo_index = MAX_TX_URBS;
+}
+
+static int ems_usb_open(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ int err;
+
+ err = ems_usb_write_mode(dev, SJA1000_MOD_RM);
+ if (err)
+ return err;
+
+ /* common open */
+ err = open_candev(netdev);
+ if (err)
+ return err;
+
+ /* finally start device */
+ err = ems_usb_start(dev);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ dev_warn(netdev->dev.parent, "couldn't start device: %d\n",
+ err);
+
+ close_candev(netdev);
+
+ return err;
+ }
+
+ dev->open_time = jiffies;
+
+ netif_start_queue(netdev);
+
+ return 0;
+}
+
+static netdev_tx_t ems_usb_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ struct ems_tx_urb_context *context = NULL;
+ struct net_device_stats *stats = &netdev->stats;
+ struct can_frame *cf = (struct can_frame *)skb->data;
+ struct ems_cpc_msg *msg;
+ struct urb *urb;
+ u8 *buf;
+ int i, err;
+ size_t size = CPC_HEADER_SIZE + CPC_MSG_HEADER_LEN
+ + sizeof(struct cpc_can_msg);
+
+ /* create a URB, and a buffer for it, and copy the data to the URB */
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ dev_err(netdev->dev.parent, "No memory left for URBs\n");
+ goto nomem;
+ }
+
+ buf = usb_buffer_alloc(dev->udev, size, GFP_ATOMIC, &urb->transfer_dma);
+ if (!buf) {
+ dev_err(netdev->dev.parent, "No memory left for USB buffer\n");
+ usb_free_urb(urb);
+ goto nomem;
+ }
+
+ msg = (struct ems_cpc_msg *)&buf[CPC_HEADER_SIZE];
+
+ msg->msg.can_msg.id = cf->can_id & CAN_ERR_MASK;
+ msg->msg.can_msg.length = cf->can_dlc;
+
+ if (cf->can_id & CAN_RTR_FLAG) {
+ msg->type = cf->can_id & CAN_EFF_FLAG ?
+ CPC_CMD_TYPE_EXT_RTR_FRAME : CPC_CMD_TYPE_RTR_FRAME;
+
+ msg->length = CPC_CAN_MSG_MIN_SIZE;
+ } else {
+ msg->type = cf->can_id & CAN_EFF_FLAG ?
+ CPC_CMD_TYPE_EXT_CAN_FRAME : CPC_CMD_TYPE_CAN_FRAME;
+
+ for (i = 0; i < cf->can_dlc; i++)
+ msg->msg.can_msg.msg[i] = cf->data[i];
+
+ msg->length = CPC_CAN_MSG_MIN_SIZE + cf->can_dlc;
+ }
+
+ for (i = 0; i < MAX_TX_URBS; i++) {
+ if (dev->tx_contexts[i].echo_index == MAX_TX_URBS) {
+ context = &dev->tx_contexts[i];
+ break;
+ }
+ }
+
+ /*
+ * May never happen! When this happens we'd more URBs in flight as
+ * allowed (MAX_TX_URBS).
+ */
+ if (!context) {
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+
+ dev_warn(netdev->dev.parent, "couldn't find free context\n");
+
+ return NETDEV_TX_BUSY;
+ }
+
+ context->dev = dev;
+ context->echo_index = i;
+ context->dlc = cf->can_dlc;
+
+ usb_fill_bulk_urb(urb, dev->udev, usb_sndbulkpipe(dev->udev, 2), buf,
+ size, ems_usb_write_bulk_callback, context);
+ urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ usb_anchor_urb(urb, &dev->tx_submitted);
+
+ can_put_echo_skb(skb, netdev, context->echo_index);
+
+ atomic_inc(&dev->active_tx_urbs);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (unlikely(err)) {
+ can_free_echo_skb(netdev, context->echo_index);
+
+ usb_unanchor_urb(urb);
+ usb_buffer_free(dev->udev, size, buf, urb->transfer_dma);
+ dev_kfree_skb(skb);
+
+ atomic_dec(&dev->active_tx_urbs);
+
+ if (err == -ENODEV) {
+ netif_device_detach(netdev);
+ } else {
+ dev_warn(netdev->dev.parent, "failed tx_urb %d\n", err);
+
+ stats->tx_dropped++;
+ }
+ } else {
+ netdev->trans_start = jiffies;
+
+ /* Slow down tx path */
+ if (atomic_read(&dev->active_tx_urbs) >= MAX_TX_URBS ||
+ dev->free_slots < 5) {
+ netif_stop_queue(netdev);
+ }
+ }
+
+ /*
+ * Release our reference to this URB, the USB core will eventually free
+ * it entirely.
+ */
+ usb_free_urb(urb);
+
+ return NETDEV_TX_OK;
+
+nomem:
+ if (skb)
+ dev_kfree_skb(skb);
+
+ stats->tx_dropped++;
+
+ return NETDEV_TX_OK;
+}
+
+static int ems_usb_close(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+
+ /* Stop polling */
+ unlink_all_urbs(dev);
+
+ netif_stop_queue(netdev);
+
+ /* Set CAN controller to reset mode */
+ if (ems_usb_write_mode(dev, SJA1000_MOD_RM))
+ dev_warn(netdev->dev.parent, "couldn't stop device");
+
+ close_candev(netdev);
+
+ dev->open_time = 0;
+
+ return 0;
+}
+
+static const struct net_device_ops ems_usb_netdev_ops = {
+ .ndo_open = ems_usb_open,
+ .ndo_stop = ems_usb_close,
+ .ndo_start_xmit = ems_usb_start_xmit,
+};
+
+static struct can_bittiming_const ems_usb_bittiming_const = {
+ .name = "ems_usb",
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 64,
+ .brp_inc = 1,
+};
+
+static int ems_usb_set_mode(struct net_device *netdev, enum can_mode mode)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+
+ if (!dev->open_time)
+ return -EINVAL;
+
+ switch (mode) {
+ case CAN_MODE_START:
+ if (ems_usb_write_mode(dev, SJA1000_MOD_NORMAL))
+ dev_warn(netdev->dev.parent, "couldn't start device");
+
+ if (netif_queue_stopped(netdev))
+ netif_wake_queue(netdev);
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return 0;
+}
+
+static int ems_usb_set_bittiming(struct net_device *netdev)
+{
+ struct ems_usb *dev = netdev_priv(netdev);
+ struct can_bittiming *bt = &dev->can.bittiming;
+ u8 btr0, btr1;
+
+ btr0 = ((bt->brp - 1) & 0x3f) | (((bt->sjw - 1) & 0x3) << 6);
+ btr1 = ((bt->prop_seg + bt->phase_seg1 - 1) & 0xf) |
+ (((bt->phase_seg2 - 1) & 0x7) << 4);
+ if (dev->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
+ btr1 |= 0x80;
+
+ dev_info(netdev->dev.parent, "setting BTR0=0x%02x BTR1=0x%02x\n",
+ btr0, btr1);
+
+ dev->active_params.msg.can_params.cc_params.sja1000.btr0 = btr0;
+ dev->active_params.msg.can_params.cc_params.sja1000.btr1 = btr1;
+
+ return ems_usb_command_msg(dev, &dev->active_params);
+}
+
+static void init_params_sja1000(struct ems_cpc_msg *msg)
+{
+ struct cpc_sja1000_params *sja1000 =
+ &msg->msg.can_params.cc_params.sja1000;
+
+ msg->type = CPC_CMD_TYPE_CAN_PARAMS;
+ msg->length = sizeof(struct cpc_can_params);
+ msg->msgid = 0;
+
+ msg->msg.can_params.cc_type = CPC_CC_TYPE_SJA1000;
+
+ /* Acceptance filter open */
+ sja1000->acc_code0 = 0x00;
+ sja1000->acc_code1 = 0x00;
+ sja1000->acc_code2 = 0x00;
+ sja1000->acc_code3 = 0x00;
+
+ /* Acceptance filter open */
+ sja1000->acc_mask0 = 0xFF;
+ sja1000->acc_mask1 = 0xFF;
+ sja1000->acc_mask2 = 0xFF;
+ sja1000->acc_mask3 = 0xFF;
+
+ sja1000->btr0 = 0;
+ sja1000->btr1 = 0;
+
+ sja1000->outp_contr = SJA1000_DEFAULT_OUTPUT_CONTROL;
+ sja1000->mode = SJA1000_MOD_RM;
+}
+
+/*
+ * probe function for new CPC-USB devices
+ */
+static int ems_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct net_device *netdev;
+ struct ems_usb *dev;
+ int i, err = -ENOMEM;
+
+ netdev = alloc_candev(sizeof(struct ems_usb));
+ if (!netdev) {
+ dev_err(netdev->dev.parent, "Couldn't alloc candev\n");
+ return -ENOMEM;
+ }
+
+ dev = netdev_priv(netdev);
+
+ dev->udev = interface_to_usbdev(intf);
+ dev->netdev = netdev;
+
+ dev->can.state = CAN_STATE_STOPPED;
+ dev->can.clock.freq = EMS_USB_ARM7_CLOCK;
+ dev->can.bittiming_const = &ems_usb_bittiming_const;
+ dev->can.do_set_bittiming = ems_usb_set_bittiming;
+ dev->can.do_set_mode = ems_usb_set_mode;
+
+ netdev->flags |= IFF_ECHO; /* we support local echo */
+
+ netdev->netdev_ops = &ems_usb_netdev_ops;
+
+ netdev->flags |= IFF_ECHO; /* we support local echo */
+
+ init_usb_anchor(&dev->rx_submitted);
+
+ init_usb_anchor(&dev->tx_submitted);
+ atomic_set(&dev->active_tx_urbs, 0);
+
+ for (i = 0; i < MAX_TX_URBS; i++)
+ dev->tx_contexts[i].echo_index = MAX_TX_URBS;
+
+ dev->intr_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->intr_urb) {
+ dev_err(netdev->dev.parent, "Couldn't alloc intr URB\n");
+ goto cleanup_candev;
+ }
+
+ dev->intr_in_buffer = kzalloc(INTR_IN_BUFFER_SIZE, GFP_KERNEL);
+ if (!dev->intr_in_buffer) {
+ dev_err(netdev->dev.parent, "Couldn't alloc Intr buffer\n");
+ goto cleanup_intr_urb;
+ }
+
+ dev->tx_msg_buffer = kzalloc(CPC_HEADER_SIZE +
+ sizeof(struct ems_cpc_msg), GFP_KERNEL);
+ if (!dev->tx_msg_buffer) {
+ dev_err(netdev->dev.parent, "Couldn't alloc Tx buffer\n");
+ goto cleanup_intr_in_buffer;
+ }
+
+ usb_set_intfdata(intf, dev);
+
+ SET_NETDEV_DEV(netdev, &intf->dev);
+
+ init_params_sja1000(&dev->active_params);
+
+ err = ems_usb_command_msg(dev, &dev->active_params);
+ if (err) {
+ dev_err(netdev->dev.parent,
+ "couldn't initialize controller: %d\n", err);
+ goto cleanup_tx_msg_buffer;
+ }
+
+ err = register_candev(netdev);
+ if (err) {
+ dev_err(netdev->dev.parent,
+ "couldn't register CAN device: %d\n", err);
+ goto cleanup_tx_msg_buffer;
+ }
+
+ return 0;
+
+cleanup_tx_msg_buffer:
+ kfree(dev->tx_msg_buffer);
+
+cleanup_intr_in_buffer:
+ kfree(dev->intr_in_buffer);
+
+cleanup_intr_urb:
+ usb_free_urb(dev->intr_urb);
+
+cleanup_candev:
+ free_candev(netdev);
+
+ return err;
+}
+
+/*
+ * called by the usb core when the device is removed from the system
+ */
+static void ems_usb_disconnect(struct usb_interface *intf)
+{
+ struct ems_usb *dev = usb_get_intfdata(intf);
+
+ usb_set_intfdata(intf, NULL);
+
+ if (dev) {
+ unregister_netdev(dev->netdev);
+ free_candev(dev->netdev);
+
+ unlink_all_urbs(dev);
+
+ usb_free_urb(dev->intr_urb);
+
+ kfree(dev->intr_in_buffer);
+ }
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver ems_usb_driver = {
+ .name = "ems_usb",
+ .probe = ems_usb_probe,
+ .disconnect = ems_usb_disconnect,
+ .id_table = ems_usb_table,
+};
+
+static int __init ems_usb_init(void)
+{
+ int err;
+
+ printk(KERN_INFO "CPC-USB kernel driver loaded\n");
+
+ /* register this driver with the USB subsystem */
+ err = usb_register(&ems_usb_driver);
+
+ if (err) {
+ err("usb_register failed. Error number %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static void __exit ems_usb_exit(void)
+{
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&ems_usb_driver);
+}
+
+module_init(ems_usb_init);
+module_exit(ems_usb_exit);
cp->uio_dev = iminor(inode);
- cnic_shutdown_bnx2_rx_ring(dev);
-
cnic_init_bnx2_tx_ring(dev);
cnic_init_bnx2_rx_ring(dev);
struct cnic_dev *dev = uinfo->priv;
struct cnic_local *cp = dev->cnic_priv;
+ cnic_shutdown_bnx2_rx_ring(dev);
+
cp->uio_dev = -1;
return 0;
}
cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_CTX_TYPE, val);
if (sb_id == 0)
- val = 2 << BNX2_L2CTX_STATUSB_NUM_SHIFT;
+ val = 2 << BNX2_L2CTX_L2_STATUSB_NUM_SHIFT;
else
- val = BNX2_L2CTX_STATUSB_NUM(sb_id);
+ val = BNX2_L2CTX_L2_STATUSB_NUM(sb_id);
cnic_ctx_wr(dev, cid_addr, BNX2_L2CTX_HOST_BDIDX, val);
rxbd = (struct rx_bd *) (cp->l2_ring + BCM_PAGE_SIZE);
cp->int_num = 0;
if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
u32 sb_id = cp->status_blk_num;
- u32 sb = BNX2_L2CTX_STATUSB_NUM(sb_id);
+ u32 sb = BNX2_L2CTX_L5_STATUSB_NUM(sb_id);
cp->int_num = sb_id << BNX2_PCICFG_INT_ACK_CMD_INT_NUM_SHIFT;
cnic_ctx_wr(dev, cp->kwq_cid_addr, L5_KRNLQ_HOST_QIDX, sb);
cnic_ulp_init(dev);
else if (event == NETDEV_UNREGISTER)
cnic_ulp_exit(dev);
- else if (event == NETDEV_UP) {
+
+ if (event == NETDEV_UP) {
if (cnic_register_netdev(dev) != 0) {
cnic_put(dev);
goto done;
#ifndef CNIC_IF_H
#define CNIC_IF_H
-#define CNIC_MODULE_VERSION "2.0.0"
-#define CNIC_MODULE_RELDATE "May 21, 2009"
+#define CNIC_MODULE_VERSION "2.0.1"
+#define CNIC_MODULE_RELDATE "Oct 01, 2009"
#define CNIC_ULP_RDMA 0
#define CNIC_ULP_ISCSI 1
static int __devinit cpmac_probe(struct platform_device *pdev)
{
int rc, phy_id;
- char mdio_bus_id[BUS_ID_SIZE];
+ char mdio_bus_id[MII_BUS_ID_SIZE];
struct resource *mem;
struct cpmac_priv *priv;
struct net_device *dev;
pdata = pdev->dev.platform_data;
if (external_switch || dumb_switch) {
- strncpy(mdio_bus_id, "0", BUS_ID_SIZE); /* fixed phys bus */
+ strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
phy_id = pdev->id;
} else {
for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
continue;
if (!cpmac_mii->phy_map[phy_id])
continue;
- strncpy(mdio_bus_id, cpmac_mii->id, BUS_ID_SIZE);
+ strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
break;
}
}
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
+ snprintf(priv->phy_name, MII_BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
- /* Renegotiate with link partner */
+ data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
if (autoneg_normal) {
- data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
- data |= BMCR_ANENABLE | BMCR_ANRESTART;
+ /* Renegotiate with link partner */
+ data |= BMCR_ANENABLE | BMCR_ANRESTART;
+ } else {
+ /* Don't negotiate speed or duplex */
+ data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
+
+ /* Set speed and duplex static */
+ if (current_speed_selection == 10)
+ data &= ~BMCR_SPEED100;
+ else
+ data |= BMCR_SPEED100;
+
+ if (current_duplex != full)
+ data &= ~BMCR_FULLDPLX;
+ else
+ data |= BMCR_FULLDPLX;
}
e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
}
/** NOTE:: For DM646x the IN_VECTOR has changed */
#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH)
#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH)
+#define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26)
+#define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27)
+
/* CPPI bit positions */
#define EMAC_CPPI_SOP_BIT BIT(31)
#define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01)
#define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02)
+/* EMAC Stats Clear Mask */
+#define EMAC_STATS_CLR_MASK (0xFFFFFFFF)
+
/** net_buf_obj: EMAC network bufferdata structure
*
* EMAC network buffer data structure
emac_int_enable(priv);
}
- if (unlikely(status & EMAC_DM644X_MAC_IN_VECTOR_HOST_INT)) {
+ mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT;
+ if (priv->version == EMAC_VERSION_2)
+ mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT;
+
+ if (unlikely(status & mask)) {
u32 ch, cause;
dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n");
netif_stop_queue(ndev);
static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
{
struct emac_priv *priv = netdev_priv(ndev);
+ u32 mac_control;
+ u32 stats_clear_mask;
/* update emac hardware stats and reset the registers*/
+ mac_control = emac_read(EMAC_MACCONTROL);
+
+ if (mac_control & EMAC_MACCONTROL_GMIIEN)
+ stats_clear_mask = EMAC_STATS_CLR_MASK;
+ else
+ stats_clear_mask = 0;
+
priv->net_dev_stats.multicast += emac_read(EMAC_RXMCASTFRAMES);
- emac_write(EMAC_RXMCASTFRAMES, EMAC_ALL_MULTI_REG_VALUE);
+ emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask);
priv->net_dev_stats.collisions += (emac_read(EMAC_TXCOLLISION) +
emac_read(EMAC_TXSINGLECOLL) +
emac_read(EMAC_TXMULTICOLL));
- emac_write(EMAC_TXCOLLISION, EMAC_ALL_MULTI_REG_VALUE);
- emac_write(EMAC_TXSINGLECOLL, EMAC_ALL_MULTI_REG_VALUE);
- emac_write(EMAC_TXMULTICOLL, EMAC_ALL_MULTI_REG_VALUE);
+ emac_write(EMAC_TXCOLLISION, stats_clear_mask);
+ emac_write(EMAC_TXSINGLECOLL, stats_clear_mask);
+ emac_write(EMAC_TXMULTICOLL, stats_clear_mask);
priv->net_dev_stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) +
emac_read(EMAC_RXJABBER) +
emac_read(EMAC_RXUNDERSIZED));
- emac_write(EMAC_RXOVERSIZED, EMAC_ALL_MULTI_REG_VALUE);
- emac_write(EMAC_RXJABBER, EMAC_ALL_MULTI_REG_VALUE);
- emac_write(EMAC_RXUNDERSIZED, EMAC_ALL_MULTI_REG_VALUE);
+ emac_write(EMAC_RXOVERSIZED, stats_clear_mask);
+ emac_write(EMAC_RXJABBER, stats_clear_mask);
+ emac_write(EMAC_RXUNDERSIZED, stats_clear_mask);
priv->net_dev_stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) +
emac_read(EMAC_RXMOFOVERRUNS));
- emac_write(EMAC_RXSOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
- emac_write(EMAC_RXMOFOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+ emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask);
+ emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask);
priv->net_dev_stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS);
- emac_write(EMAC_RXDMAOVERRUNS, EMAC_ALL_MULTI_REG_VALUE);
+ emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask);
priv->net_dev_stats.tx_carrier_errors +=
emac_read(EMAC_TXCARRIERSENSE);
- emac_write(EMAC_TXCARRIERSENSE, EMAC_ALL_MULTI_REG_VALUE);
+ emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask);
priv->net_dev_stats.tx_fifo_errors = emac_read(EMAC_TXUNDERRUN);
- emac_write(EMAC_TXUNDERRUN, EMAC_ALL_MULTI_REG_VALUE);
+ emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
return &priv->net_dev_stats;
}
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#define DM9000_RCSR 0x32
#define CHIPR_DM9000A 0x19
-#define CHIPR_DM9000B 0x1B
+#define CHIPR_DM9000B 0x1A
#define DM9000_MRCMDX 0xF0
#define DM9000_MRCMD 0xF2
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/types.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/init.h>
} else
DPRINTK(HW, DEBUG, "phy_addr = %d\n", nic->mii.phy_id);
- /* Isolate all the PHY ids */
- for (addr = 0; addr < 32; addr++)
- mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
- /* Select the discovered PHY */
- bmcr &= ~BMCR_ISOLATE;
- mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
-
/* Get phy ID */
id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
nic->phy = (u32)id_hi << 16 | (u32)id_lo;
DPRINTK(HW, DEBUG, "phy ID = 0x%08X\n", nic->phy);
+ /* Select the phy and isolate the rest */
+ for (addr = 0; addr < 32; addr++) {
+ if (addr != nic->mii.phy_id) {
+ mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+ } else if (nic->phy != phy_82552_v) {
+ bmcr = mdio_read(netdev, addr, MII_BMCR);
+ mdio_write(netdev, addr, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+ }
+ }
+ /*
+ * Workaround for 82552:
+ * Clear the ISOLATE bit on selected phy_id last (mirrored on all
+ * other phy_id's) using bmcr value from addr discovery loop above.
+ */
+ if (nic->phy == phy_82552_v)
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+
/* Handle National tx phys */
#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
#define AUTO_ALL_MODES 0
#define E1000_EEPROM_82544_APM 0x0004
-#define E1000_EEPROM_ICH8_APME 0x0004
#define E1000_EEPROM_APME 0x0400
#ifndef E1000_MASTER_SLAVE
u64 hw_csum_err;
u64 hw_csum_good;
- u64 rx_hdr_split;
u32 alloc_rx_buff_failed;
u32 rx_int_delay;
u32 rx_abs_int_delay;
struct e1000_rx_ring test_rx_ring;
int msg_enable;
- bool have_msi;
/* to not mess up cache alignment, always add to the bottom */
bool tso_force;
{ "rx_long_byte_count", E1000_STAT(stats.gorcl) },
{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
- { "rx_header_split", E1000_STAT(rx_hdr_split) },
{ "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
{ "tx_smbus", E1000_STAT(stats.mgptc) },
{ "rx_smbus", E1000_STAT(stats.mgprc) },
SUPPORTED_1000baseT_Full|
SUPPORTED_Autoneg |
SUPPORTED_TP);
- if (hw->phy_type == e1000_phy_ife)
- ecmd->supported &= ~SUPPORTED_1000baseT_Full;
ecmd->advertising = ADVERTISED_TP;
if (hw->autoneg == 1) {
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- /* When SoL/IDER sessions are active, autoneg/speed/duplex
- * cannot be changed */
- if (e1000_check_phy_reset_block(hw)) {
- DPRINTK(DRV, ERR, "Cannot change link characteristics "
- "when SoL/IDER is active.\n");
- return -EINVAL;
- }
-
while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
msleep(1);
else
netdev->features &= ~NETIF_F_TSO;
- if (data && (adapter->hw.mac_type > e1000_82547_rev_2))
- netdev->features |= NETIF_F_TSO6;
- else
- netdev->features &= ~NETIF_F_TSO6;
+ netdev->features &= ~NETIF_F_TSO6;
DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
adapter->tso_force = true;
regs_buff[24] = (u32)phy_data; /* phy local receiver status */
regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
if (hw->mac_type >= e1000_82540 &&
- hw->mac_type < e1000_82571 &&
hw->media_type == e1000_media_type_copper) {
regs_buff[26] = er32(MANC);
}
ret_val = e1000_write_eeprom(hw, first_word,
last_word - first_word + 1, eeprom_buff);
- /* Update the checksum over the first part of the EEPROM if needed
- * and flush shadow RAM for 82573 conrollers */
- if ((ret_val == 0) && ((first_word <= EEPROM_CHECKSUM_REG) ||
- (hw->mac_type == e1000_82573)))
+ /* Update the checksum over the first part of the EEPROM if needed */
+ if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG))
e1000_update_eeprom_checksum(hw);
kfree(eeprom_buff);
struct ethtool_drvinfo *drvinfo)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
char firmware_version[32];
- u16 eeprom_data;
strncpy(drvinfo->driver, e1000_driver_name, 32);
strncpy(drvinfo->version, e1000_driver_version, 32);
- /* EEPROM image version # is reported as firmware version # for
- * 8257{1|2|3} controllers */
- e1000_read_eeprom(hw, 5, 1, &eeprom_data);
- switch (hw->mac_type) {
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- case e1000_80003es2lan:
- case e1000_ich8lan:
- sprintf(firmware_version, "%d.%d-%d",
- (eeprom_data & 0xF000) >> 12,
- (eeprom_data & 0x0FF0) >> 4,
- eeprom_data & 0x000F);
- break;
- default:
- sprintf(firmware_version, "N/A");
- }
-
+ sprintf(firmware_version, "N/A");
strncpy(drvinfo->fw_version, firmware_version, 32);
strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
drvinfo->regdump_len = e1000_get_regs_len(netdev);
/* The status register is Read Only, so a write should fail.
* Some bits that get toggled are ignored.
*/
- switch (hw->mac_type) {
+
/* there are several bits on newer hardware that are r/w */
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
- toggle = 0x7FFFF3FF;
- break;
- case e1000_82573:
- case e1000_ich8lan:
- toggle = 0x7FFFF033;
- break;
- default:
- toggle = 0xFFFFF833;
- break;
- }
+ toggle = 0xFFFFF833;
before = er32(STATUS);
value = (er32(STATUS) & toggle);
/* restore previous status */
ew32(STATUS, before);
- if (hw->mac_type != e1000_ich8lan) {
- REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
- }
+ REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
- before = (hw->mac_type == e1000_ich8lan ?
- 0x06C3B33E : 0x06DFB3FE);
+ before = 0x06DFB3FE;
REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
- if (hw->mac_type != e1000_ich8lan)
- REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
- value = (hw->mac_type == e1000_ich8lan ?
- E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES);
+ value = E1000_RAR_ENTRIES;
for (i = 0; i < value; i++) {
REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
0xFFFFFFFF);
}
- value = (hw->mac_type == e1000_ich8lan ?
- E1000_MC_TBL_SIZE_ICH8LAN : E1000_MC_TBL_SIZE);
+ value = E1000_MC_TBL_SIZE;
for (i = 0; i < value; i++)
REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
/* Test each interrupt */
for (; i < 10; i++) {
- if (hw->mac_type == e1000_ich8lan && i == 8)
- continue;
-
/* Interrupt to test */
mask = 1 << i;
e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
/* autoneg off */
e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
- } else if (hw->phy_type == e1000_phy_gg82563)
- e1000_write_phy_reg(hw,
- GG82563_PHY_KMRN_MODE_CTRL,
- 0x1CC);
+ }
ctrl_reg = er32(CTRL);
- if (hw->phy_type == e1000_phy_ife) {
- /* force 100, set loopback */
- e1000_write_phy_reg(hw, PHY_CTRL, 0x6100);
+ /* force 1000, set loopback */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
- /* Now set up the MAC to the same speed/duplex as the PHY. */
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_100 |/* Force Speed to 100 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
- } else {
- /* force 1000, set loopback */
- e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
-
- /* Now set up the MAC to the same speed/duplex as the PHY. */
- ctrl_reg = er32(CTRL);
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
- }
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = er32(CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
if (hw->media_type == e1000_media_type_copper &&
hw->phy_type == e1000_phy_m88)
case e1000_82541_rev_2:
case e1000_82547:
case e1000_82547_rev_2:
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- case e1000_80003es2lan:
- case e1000_ich8lan:
return e1000_integrated_phy_loopback(adapter);
break;
-
default:
/* Default PHY loopback work is to read the MII
* control register and assert bit 14 (loopback mode).
case e1000_82546_rev_3:
return e1000_set_phy_loopback(adapter);
break;
- case e1000_82571:
- case e1000_82572:
-#define E1000_SERDES_LB_ON 0x410
- e1000_set_phy_loopback(adapter);
- ew32(SCTL, E1000_SERDES_LB_ON);
- msleep(10);
- return 0;
- break;
default:
rctl = er32(RCTL);
rctl |= E1000_RCTL_LBM_TCVR;
ew32(RCTL, rctl);
switch (hw->mac_type) {
- case e1000_82571:
- case e1000_82572:
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
-#define E1000_SERDES_LB_OFF 0x400
- ew32(SCTL, E1000_SERDES_LB_OFF);
- msleep(10);
- break;
- }
- /* Fall Through */
case e1000_82545:
case e1000_82546:
case e1000_82545_rev_3:
case e1000_82546_rev_3:
default:
hw->autoneg = true;
- if (hw->phy_type == e1000_phy_gg82563)
- e1000_write_phy_reg(hw,
- GG82563_PHY_KMRN_MODE_CTRL,
- 0x180);
e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
if (phy_reg & MII_CR_LOOPBACK) {
phy_reg &= ~MII_CR_LOOPBACK;
static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
{
- struct e1000_hw *hw = &adapter->hw;
-
- /* PHY loopback cannot be performed if SoL/IDER
- * sessions are active */
- if (e1000_check_phy_reset_block(hw)) {
- DPRINTK(DRV, ERR, "Cannot do PHY loopback test "
- "when SoL/IDER is active.\n");
- *data = 0;
- goto out;
- }
-
*data = e1000_setup_desc_rings(adapter);
if (*data)
goto out;
*data = 0;
if (hw->media_type == e1000_media_type_internal_serdes) {
int i = 0;
- hw->serdes_link_down = true;
+ hw->serdes_has_link = false;
/* On some blade server designs, link establishment
* could take as long as 2-3 minutes */
do {
e1000_check_for_link(hw);
- if (!hw->serdes_link_down)
+ if (hw->serdes_has_link)
return *data;
msleep(20);
} while (i++ < 3750);
case E1000_DEV_ID_82545EM_COPPER:
case E1000_DEV_ID_82546GB_QUAD_COPPER:
case E1000_DEV_ID_82546GB_PCIE:
- case E1000_DEV_ID_82571EB_SERDES_QUAD:
/* these don't support WoL at all */
wol->supported = 0;
break;
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
- case E1000_DEV_ID_82571EB_FIBER:
- case E1000_DEV_ID_82571EB_SERDES:
- case E1000_DEV_ID_82571EB_COPPER:
/* Wake events not supported on port B */
if (er32(STATUS) & E1000_STATUS_FUNC_1) {
wol->supported = 0;
/* return success for non excluded adapter ports */
retval = 0;
break;
- case E1000_DEV_ID_82571EB_QUAD_COPPER:
- case E1000_DEV_ID_82571EB_QUAD_FIBER:
- case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
- case E1000_DEV_ID_82571PT_QUAD_COPPER:
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
/* quad port adapters only support WoL on port A */
if (!adapter->quad_port_a) {
if (!data)
data = INT_MAX;
- if (hw->mac_type < e1000_82571) {
- if (!adapter->blink_timer.function) {
- init_timer(&adapter->blink_timer);
- adapter->blink_timer.function = e1000_led_blink_callback;
- adapter->blink_timer.data = (unsigned long)adapter;
- }
- e1000_setup_led(hw);
- mod_timer(&adapter->blink_timer, jiffies);
- msleep_interruptible(data * 1000);
- del_timer_sync(&adapter->blink_timer);
- } else if (hw->phy_type == e1000_phy_ife) {
- if (!adapter->blink_timer.function) {
- init_timer(&adapter->blink_timer);
- adapter->blink_timer.function = e1000_led_blink_callback;
- adapter->blink_timer.data = (unsigned long)adapter;
- }
- mod_timer(&adapter->blink_timer, jiffies);
- msleep_interruptible(data * 1000);
- del_timer_sync(&adapter->blink_timer);
- e1000_write_phy_reg(&(adapter->hw), IFE_PHY_SPECIAL_CONTROL_LED, 0);
- } else {
- e1000_blink_led_start(hw);
- msleep_interruptible(data * 1000);
+ if (!adapter->blink_timer.function) {
+ init_timer(&adapter->blink_timer);
+ adapter->blink_timer.function = e1000_led_blink_callback;
+ adapter->blink_timer.data = (unsigned long)adapter;
}
+ e1000_setup_led(hw);
+ mod_timer(&adapter->blink_timer, jiffies);
+ msleep_interruptible(data * 1000);
+ del_timer_sync(&adapter->blink_timer);
e1000_led_off(hw);
clear_bit(E1000_LED_ON, &adapter->led_status);
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-*******************************************************************************/
+ */
/* e1000_hw.c
* Shared functions for accessing and configuring the MAC
*/
-
#include "e1000_hw.h"
-static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask);
-static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask);
-static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data);
-static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
-static s32 e1000_get_software_semaphore(struct e1000_hw *hw);
-static void e1000_release_software_semaphore(struct e1000_hw *hw);
-
-static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw);
static s32 e1000_check_downshift(struct e1000_hw *hw);
static s32 e1000_check_polarity(struct e1000_hw *hw,
e1000_rev_polarity *polarity);
static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
static void e1000_clear_vfta(struct e1000_hw *hw);
-static s32 e1000_commit_shadow_ram(struct e1000_hw *hw);
static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
bool link_up);
static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
-static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank);
static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
u16 *max_length);
-static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw);
static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
-static s32 e1000_get_software_flag(struct e1000_hw *hw);
-static s32 e1000_ich8_cycle_init(struct e1000_hw *hw);
-static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout);
static s32 e1000_id_led_init(struct e1000_hw *hw);
-static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
- u32 cnf_base_addr,
- u32 cnf_size);
-static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw);
static void e1000_init_rx_addrs(struct e1000_hw *hw);
-static void e1000_initialize_hardware_bits(struct e1000_hw *hw);
-static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw);
-static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw);
-static s32 e1000_mng_enable_host_if(struct e1000_hw *hw);
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
- u16 offset, u8 *sum);
-static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw,
- struct e1000_host_mng_command_header
- *hdr);
-static s32 e1000_mng_write_commit(struct e1000_hw *hw);
-static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
- struct e1000_phy_info *phy_info);
static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info);
-static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data);
-static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data);
-static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd);
static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
struct e1000_phy_info *phy_info);
-static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw);
-static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data);
-static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index,
- u8 byte);
-static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte);
-static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data);
-static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
- u16 *data);
-static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
- u16 data);
-static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data);
-static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data);
-static void e1000_release_software_flag(struct e1000_hw *hw);
static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
-static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop);
-static void e1000_set_pci_express_master_disable(struct e1000_hw *hw);
static s32 e1000_wait_autoneg(struct e1000_hw *hw);
static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
static s32 e1000_set_phy_type(struct e1000_hw *hw);
static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
-static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data,
- u16 count);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count);
static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data);
+ u16 words, u16 *data);
static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data);
static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
u16 phy_data);
-static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr,
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
u16 *phy_data);
static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
static s32 e1000_set_vco_speed(struct e1000_hw *hw);
static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
static s32 e1000_set_phy_mode(struct e1000_hw *hw);
-static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer);
-static u8 e1000_calculate_mng_checksum(char *buffer, u32 length);
-static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex);
-static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw);
-static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
/* IGP cable length table */
static const
-u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] =
- { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
- 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
- 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
- 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
- 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
- 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100, 100,
- 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
- 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120};
-
-static const
-u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] =
- { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
- 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
- 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
- 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
- 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
- 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
- 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
- 104, 109, 114, 118, 121, 124};
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = {
+ 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+ 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
+ 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
+ 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
+ 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
+ 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100,
+ 100,
+ 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
+ 110, 110,
+ 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120,
+ 120, 120
+};
static DEFINE_SPINLOCK(e1000_eeprom_lock);
-/******************************************************************************
- * Set the phy type member in the hw struct.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_set_phy_type - Set the phy type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
static s32 e1000_set_phy_type(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_set_phy_type");
-
- if (hw->mac_type == e1000_undefined)
- return -E1000_ERR_PHY_TYPE;
-
- switch (hw->phy_id) {
- case M88E1000_E_PHY_ID:
- case M88E1000_I_PHY_ID:
- case M88E1011_I_PHY_ID:
- case M88E1111_I_PHY_ID:
- hw->phy_type = e1000_phy_m88;
- break;
- case IGP01E1000_I_PHY_ID:
- if (hw->mac_type == e1000_82541 ||
- hw->mac_type == e1000_82541_rev_2 ||
- hw->mac_type == e1000_82547 ||
- hw->mac_type == e1000_82547_rev_2) {
- hw->phy_type = e1000_phy_igp;
- break;
- }
- case IGP03E1000_E_PHY_ID:
- hw->phy_type = e1000_phy_igp_3;
- break;
- case IFE_E_PHY_ID:
- case IFE_PLUS_E_PHY_ID:
- case IFE_C_E_PHY_ID:
- hw->phy_type = e1000_phy_ife;
- break;
- case GG82563_E_PHY_ID:
- if (hw->mac_type == e1000_80003es2lan) {
- hw->phy_type = e1000_phy_gg82563;
- break;
- }
- /* Fall Through */
- default:
- /* Should never have loaded on this device */
- hw->phy_type = e1000_phy_undefined;
- return -E1000_ERR_PHY_TYPE;
- }
-
- return E1000_SUCCESS;
-}
-
-/******************************************************************************
- * IGP phy init script - initializes the GbE PHY
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void e1000_phy_init_script(struct e1000_hw *hw)
-{
- u32 ret_val;
- u16 phy_saved_data;
-
- DEBUGFUNC("e1000_phy_init_script");
-
- if (hw->phy_init_script) {
- msleep(20);
-
- /* Save off the current value of register 0x2F5B to be restored at
- * the end of this routine. */
- ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
- /* Disabled the PHY transmitter */
- e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
-
- msleep(20);
-
- e1000_write_phy_reg(hw,0x0000,0x0140);
-
- msleep(5);
-
- switch (hw->mac_type) {
- case e1000_82541:
- case e1000_82547:
- e1000_write_phy_reg(hw, 0x1F95, 0x0001);
-
- e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
-
- e1000_write_phy_reg(hw, 0x1F79, 0x0018);
-
- e1000_write_phy_reg(hw, 0x1F30, 0x1600);
-
- e1000_write_phy_reg(hw, 0x1F31, 0x0014);
-
- e1000_write_phy_reg(hw, 0x1F32, 0x161C);
-
- e1000_write_phy_reg(hw, 0x1F94, 0x0003);
-
- e1000_write_phy_reg(hw, 0x1F96, 0x003F);
-
- e1000_write_phy_reg(hw, 0x2010, 0x0008);
- break;
+ DEBUGFUNC("e1000_set_phy_type");
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- e1000_write_phy_reg(hw, 0x1F73, 0x0099);
- break;
- default:
- break;
- }
+ if (hw->mac_type == e1000_undefined)
+ return -E1000_ERR_PHY_TYPE;
- e1000_write_phy_reg(hw, 0x0000, 0x3300);
-
- msleep(20);
-
- /* Now enable the transmitter */
- e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
- if (hw->mac_type == e1000_82547) {
- u16 fused, fine, coarse;
-
- /* Move to analog registers page */
- e1000_read_phy_reg(hw, IGP01E1000_ANALOG_SPARE_FUSE_STATUS, &fused);
-
- if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
- e1000_read_phy_reg(hw, IGP01E1000_ANALOG_FUSE_STATUS, &fused);
+ switch (hw->phy_id) {
+ case M88E1000_E_PHY_ID:
+ case M88E1000_I_PHY_ID:
+ case M88E1011_I_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ hw->phy_type = e1000_phy_m88;
+ break;
+ case IGP01E1000_I_PHY_ID:
+ if (hw->mac_type == e1000_82541 ||
+ hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ hw->phy_type = e1000_phy_igp;
+ break;
+ }
+ default:
+ /* Should never have loaded on this device */
+ hw->phy_type = e1000_phy_undefined;
+ return -E1000_ERR_PHY_TYPE;
+ }
- fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
- coarse = fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+ return E1000_SUCCESS;
+}
- if (coarse > IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
- coarse -= IGP01E1000_ANALOG_FUSE_COARSE_10;
- fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
- } else if (coarse == IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
- fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+/**
+ * e1000_phy_init_script - IGP phy init script - initializes the GbE PHY
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_phy_init_script(struct e1000_hw *hw)
+{
+ u32 ret_val;
+ u16 phy_saved_data;
+
+ DEBUGFUNC("e1000_phy_init_script");
+
+ if (hw->phy_init_script) {
+ msleep(20);
+
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of this routine. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ /* Disabled the PHY transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+ msleep(20);
+
+ e1000_write_phy_reg(hw, 0x0000, 0x0140);
+ msleep(5);
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ e1000_write_phy_reg(hw, 0x1F95, 0x0001);
+ e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
+ e1000_write_phy_reg(hw, 0x1F79, 0x0018);
+ e1000_write_phy_reg(hw, 0x1F30, 0x1600);
+ e1000_write_phy_reg(hw, 0x1F31, 0x0014);
+ e1000_write_phy_reg(hw, 0x1F32, 0x161C);
+ e1000_write_phy_reg(hw, 0x1F94, 0x0003);
+ e1000_write_phy_reg(hw, 0x1F96, 0x003F);
+ e1000_write_phy_reg(hw, 0x2010, 0x0008);
+ break;
- fused = (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
- (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
- (coarse & IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ e1000_write_phy_reg(hw, 0x1F73, 0x0099);
+ break;
+ default:
+ break;
+ }
- e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_CONTROL, fused);
- e1000_write_phy_reg(hw, IGP01E1000_ANALOG_FUSE_BYPASS,
- IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
- }
- }
- }
+ e1000_write_phy_reg(hw, 0x0000, 0x3300);
+ msleep(20);
+
+ /* Now enable the transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (hw->mac_type == e1000_82547) {
+ u16 fused, fine, coarse;
+
+ /* Move to analog registers page */
+ e1000_read_phy_reg(hw,
+ IGP01E1000_ANALOG_SPARE_FUSE_STATUS,
+ &fused);
+
+ if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
+ e1000_read_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_STATUS,
+ &fused);
+
+ fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
+ coarse =
+ fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+
+ if (coarse >
+ IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
+ coarse -=
+ IGP01E1000_ANALOG_FUSE_COARSE_10;
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
+ } else if (coarse ==
+ IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+
+ fused =
+ (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
+ (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
+ (coarse &
+ IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+
+ e1000_write_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_CONTROL,
+ fused);
+ e1000_write_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_BYPASS,
+ IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
+ }
+ }
+ }
}
-/******************************************************************************
- * Set the mac type member in the hw struct.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+/**
+ * e1000_set_mac_type - Set the mac type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
s32 e1000_set_mac_type(struct e1000_hw *hw)
{
DEBUGFUNC("e1000_set_mac_type");
case E1000_DEV_ID_82547GI:
hw->mac_type = e1000_82547_rev_2;
break;
- case E1000_DEV_ID_82571EB_COPPER:
- case E1000_DEV_ID_82571EB_FIBER:
- case E1000_DEV_ID_82571EB_SERDES:
- case E1000_DEV_ID_82571EB_SERDES_DUAL:
- case E1000_DEV_ID_82571EB_SERDES_QUAD:
- case E1000_DEV_ID_82571EB_QUAD_COPPER:
- case E1000_DEV_ID_82571PT_QUAD_COPPER:
- case E1000_DEV_ID_82571EB_QUAD_FIBER:
- case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
- hw->mac_type = e1000_82571;
- break;
- case E1000_DEV_ID_82572EI_COPPER:
- case E1000_DEV_ID_82572EI_FIBER:
- case E1000_DEV_ID_82572EI_SERDES:
- case E1000_DEV_ID_82572EI:
- hw->mac_type = e1000_82572;
- break;
- case E1000_DEV_ID_82573E:
- case E1000_DEV_ID_82573E_IAMT:
- case E1000_DEV_ID_82573L:
- hw->mac_type = e1000_82573;
- break;
- case E1000_DEV_ID_80003ES2LAN_COPPER_SPT:
- case E1000_DEV_ID_80003ES2LAN_SERDES_SPT:
- case E1000_DEV_ID_80003ES2LAN_COPPER_DPT:
- case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
- hw->mac_type = e1000_80003es2lan;
- break;
- case E1000_DEV_ID_ICH8_IGP_M_AMT:
- case E1000_DEV_ID_ICH8_IGP_AMT:
- case E1000_DEV_ID_ICH8_IGP_C:
- case E1000_DEV_ID_ICH8_IFE:
- case E1000_DEV_ID_ICH8_IFE_GT:
- case E1000_DEV_ID_ICH8_IFE_G:
- case E1000_DEV_ID_ICH8_IGP_M:
- hw->mac_type = e1000_ich8lan;
- break;
default:
/* Should never have loaded on this device */
return -E1000_ERR_MAC_TYPE;
}
switch (hw->mac_type) {
- case e1000_ich8lan:
- hw->swfwhw_semaphore_present = true;
- hw->asf_firmware_present = true;
- break;
- case e1000_80003es2lan:
- hw->swfw_sync_present = true;
- /* fall through */
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- hw->eeprom_semaphore_present = true;
- /* fall through */
case e1000_82541:
case e1000_82547:
case e1000_82541_rev_2:
if (hw->mac_type == e1000_82543)
hw->bad_tx_carr_stats_fd = true;
- /* capable of receiving management packets to the host */
- if (hw->mac_type >= e1000_82571)
- hw->has_manc2h = true;
-
- /* In rare occasions, ESB2 systems would end up started without
- * the RX unit being turned on.
- */
- if (hw->mac_type == e1000_80003es2lan)
- hw->rx_needs_kicking = true;
-
if (hw->mac_type > e1000_82544)
hw->has_smbus = true;
return E1000_SUCCESS;
}
-/*****************************************************************************
- * Set media type and TBI compatibility.
- *
- * hw - Struct containing variables accessed by shared code
- * **************************************************************************/
+/**
+ * e1000_set_media_type - Set media type and TBI compatibility.
+ * @hw: Struct containing variables accessed by shared code
+ */
void e1000_set_media_type(struct e1000_hw *hw)
{
- u32 status;
-
- DEBUGFUNC("e1000_set_media_type");
-
- if (hw->mac_type != e1000_82543) {
- /* tbi_compatibility is only valid on 82543 */
- hw->tbi_compatibility_en = false;
- }
-
- switch (hw->device_id) {
- case E1000_DEV_ID_82545GM_SERDES:
- case E1000_DEV_ID_82546GB_SERDES:
- case E1000_DEV_ID_82571EB_SERDES:
- case E1000_DEV_ID_82571EB_SERDES_DUAL:
- case E1000_DEV_ID_82571EB_SERDES_QUAD:
- case E1000_DEV_ID_82572EI_SERDES:
- case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
- hw->media_type = e1000_media_type_internal_serdes;
- break;
- default:
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- hw->media_type = e1000_media_type_fiber;
- break;
- case e1000_ich8lan:
- case e1000_82573:
- /* The STATUS_TBIMODE bit is reserved or reused for the this
- * device.
- */
- hw->media_type = e1000_media_type_copper;
- break;
- default:
- status = er32(STATUS);
- if (status & E1000_STATUS_TBIMODE) {
- hw->media_type = e1000_media_type_fiber;
- /* tbi_compatibility not valid on fiber */
- hw->tbi_compatibility_en = false;
- } else {
- hw->media_type = e1000_media_type_copper;
- }
- break;
- }
- }
+ u32 status;
+
+ DEBUGFUNC("e1000_set_media_type");
+
+ if (hw->mac_type != e1000_82543) {
+ /* tbi_compatibility is only valid on 82543 */
+ hw->tbi_compatibility_en = false;
+ }
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82545GM_SERDES:
+ case E1000_DEV_ID_82546GB_SERDES:
+ hw->media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->media_type = e1000_media_type_fiber;
+ break;
+ default:
+ status = er32(STATUS);
+ if (status & E1000_STATUS_TBIMODE) {
+ hw->media_type = e1000_media_type_fiber;
+ /* tbi_compatibility not valid on fiber */
+ hw->tbi_compatibility_en = false;
+ } else {
+ hw->media_type = e1000_media_type_copper;
+ }
+ break;
+ }
+ }
}
-/******************************************************************************
- * Reset the transmit and receive units; mask and clear all interrupts.
+/**
+ * e1000_reset_hw: reset the hardware completely
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ */
s32 e1000_reset_hw(struct e1000_hw *hw)
{
- u32 ctrl;
- u32 ctrl_ext;
- u32 icr;
- u32 manc;
- u32 led_ctrl;
- u32 timeout;
- u32 extcnf_ctrl;
- s32 ret_val;
-
- DEBUGFUNC("e1000_reset_hw");
-
- /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
- if (hw->mac_type == e1000_82542_rev2_0) {
- DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
- e1000_pci_clear_mwi(hw);
- }
-
- if (hw->bus_type == e1000_bus_type_pci_express) {
- /* Prevent the PCI-E bus from sticking if there is no TLP connection
- * on the last TLP read/write transaction when MAC is reset.
- */
- if (e1000_disable_pciex_master(hw) != E1000_SUCCESS) {
- DEBUGOUT("PCI-E Master disable polling has failed.\n");
- }
- }
-
- /* Clear interrupt mask to stop board from generating interrupts */
- DEBUGOUT("Masking off all interrupts\n");
- ew32(IMC, 0xffffffff);
-
- /* Disable the Transmit and Receive units. Then delay to allow
- * any pending transactions to complete before we hit the MAC with
- * the global reset.
- */
- ew32(RCTL, 0);
- ew32(TCTL, E1000_TCTL_PSP);
- E1000_WRITE_FLUSH();
-
- /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
- hw->tbi_compatibility_on = false;
-
- /* Delay to allow any outstanding PCI transactions to complete before
- * resetting the device
- */
- msleep(10);
-
- ctrl = er32(CTRL);
-
- /* Must reset the PHY before resetting the MAC */
- if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
- msleep(5);
- }
-
- /* Must acquire the MDIO ownership before MAC reset.
- * Ownership defaults to firmware after a reset. */
- if (hw->mac_type == e1000_82573) {
- timeout = 10;
-
- extcnf_ctrl = er32(EXTCNF_CTRL);
- extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
-
- do {
- ew32(EXTCNF_CTRL, extcnf_ctrl);
- extcnf_ctrl = er32(EXTCNF_CTRL);
-
- if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
- break;
- else
- extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
-
- msleep(2);
- timeout--;
- } while (timeout);
- }
-
- /* Workaround for ICH8 bit corruption issue in FIFO memory */
- if (hw->mac_type == e1000_ich8lan) {
- /* Set Tx and Rx buffer allocation to 8k apiece. */
- ew32(PBA, E1000_PBA_8K);
- /* Set Packet Buffer Size to 16k. */
- ew32(PBS, E1000_PBS_16K);
- }
-
- /* Issue a global reset to the MAC. This will reset the chip's
- * transmit, receive, DMA, and link units. It will not effect
- * the current PCI configuration. The global reset bit is self-
- * clearing, and should clear within a microsecond.
- */
- DEBUGOUT("Issuing a global reset to MAC\n");
-
- switch (hw->mac_type) {
- case e1000_82544:
- case e1000_82540:
- case e1000_82545:
- case e1000_82546:
- case e1000_82541:
- case e1000_82541_rev_2:
- /* These controllers can't ack the 64-bit write when issuing the
- * reset, so use IO-mapping as a workaround to issue the reset */
- E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
- break;
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- /* Reset is performed on a shadow of the control register */
- ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
- break;
- case e1000_ich8lan:
- if (!hw->phy_reset_disable &&
- e1000_check_phy_reset_block(hw) == E1000_SUCCESS) {
- /* e1000_ich8lan PHY HW reset requires MAC CORE reset
- * at the same time to make sure the interface between
- * MAC and the external PHY is reset.
- */
- ctrl |= E1000_CTRL_PHY_RST;
- }
-
- e1000_get_software_flag(hw);
- ew32(CTRL, (ctrl | E1000_CTRL_RST));
- msleep(5);
- break;
- default:
- ew32(CTRL, (ctrl | E1000_CTRL_RST));
- break;
- }
-
- /* After MAC reset, force reload of EEPROM to restore power-on settings to
- * device. Later controllers reload the EEPROM automatically, so just wait
- * for reload to complete.
- */
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- /* Wait for reset to complete */
- udelay(10);
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- ew32(CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH();
- /* Wait for EEPROM reload */
- msleep(2);
- break;
- case e1000_82541:
- case e1000_82541_rev_2:
- case e1000_82547:
- case e1000_82547_rev_2:
- /* Wait for EEPROM reload */
- msleep(20);
- break;
- case e1000_82573:
- if (!e1000_is_onboard_nvm_eeprom(hw)) {
- udelay(10);
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- ew32(CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH();
- }
- /* fall through */
- default:
- /* Auto read done will delay 5ms or poll based on mac type */
- ret_val = e1000_get_auto_rd_done(hw);
- if (ret_val)
- return ret_val;
- break;
- }
-
- /* Disable HW ARPs on ASF enabled adapters */
- if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) {
- manc = er32(MANC);
- manc &= ~(E1000_MANC_ARP_EN);
- ew32(MANC, manc);
- }
-
- if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- e1000_phy_init_script(hw);
-
- /* Configure activity LED after PHY reset */
- led_ctrl = er32(LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- ew32(LEDCTL, led_ctrl);
- }
-
- /* Clear interrupt mask to stop board from generating interrupts */
- DEBUGOUT("Masking off all interrupts\n");
- ew32(IMC, 0xffffffff);
-
- /* Clear any pending interrupt events. */
- icr = er32(ICR);
-
- /* If MWI was previously enabled, reenable it. */
- if (hw->mac_type == e1000_82542_rev2_0) {
- if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
- e1000_pci_set_mwi(hw);
- }
-
- if (hw->mac_type == e1000_ich8lan) {
- u32 kab = er32(KABGTXD);
- kab |= E1000_KABGTXD_BGSQLBIAS;
- ew32(KABGTXD, kab);
- }
-
- return E1000_SUCCESS;
-}
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 icr;
+ u32 manc;
+ u32 led_ctrl;
+ s32 ret_val;
-/******************************************************************************
- *
- * Initialize a number of hardware-dependent bits
- *
- * hw: Struct containing variables accessed by shared code
- *
- * This function contains hardware limitation workarounds for PCI-E adapters
- *
- *****************************************************************************/
-static void e1000_initialize_hardware_bits(struct e1000_hw *hw)
-{
- if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) {
- /* Settings common to all PCI-express silicon */
- u32 reg_ctrl, reg_ctrl_ext;
- u32 reg_tarc0, reg_tarc1;
- u32 reg_tctl;
- u32 reg_txdctl, reg_txdctl1;
-
- /* link autonegotiation/sync workarounds */
- reg_tarc0 = er32(TARC0);
- reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27));
-
- /* Enable not-done TX descriptor counting */
- reg_txdctl = er32(TXDCTL);
- reg_txdctl |= E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL, reg_txdctl);
- reg_txdctl1 = er32(TXDCTL1);
- reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL1, reg_txdctl1);
-
- switch (hw->mac_type) {
- case e1000_82571:
- case e1000_82572:
- /* Clear PHY TX compatible mode bits */
- reg_tarc1 = er32(TARC1);
- reg_tarc1 &= ~((1 << 30)|(1 << 29));
-
- /* link autonegotiation/sync workarounds */
- reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23));
-
- /* TX ring control fixes */
- reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24));
-
- /* Multiple read bit is reversed polarity */
- reg_tctl = er32(TCTL);
- if (reg_tctl & E1000_TCTL_MULR)
- reg_tarc1 &= ~(1 << 28);
- else
- reg_tarc1 |= (1 << 28);
-
- ew32(TARC1, reg_tarc1);
- break;
- case e1000_82573:
- reg_ctrl_ext = er32(CTRL_EXT);
- reg_ctrl_ext &= ~(1 << 23);
- reg_ctrl_ext |= (1 << 22);
-
- /* TX byte count fix */
- reg_ctrl = er32(CTRL);
- reg_ctrl &= ~(1 << 29);
-
- ew32(CTRL_EXT, reg_ctrl_ext);
- ew32(CTRL, reg_ctrl);
- break;
- case e1000_80003es2lan:
- /* improve small packet performace for fiber/serdes */
- if ((hw->media_type == e1000_media_type_fiber) ||
- (hw->media_type == e1000_media_type_internal_serdes)) {
- reg_tarc0 &= ~(1 << 20);
- }
-
- /* Multiple read bit is reversed polarity */
- reg_tctl = er32(TCTL);
- reg_tarc1 = er32(TARC1);
- if (reg_tctl & E1000_TCTL_MULR)
- reg_tarc1 &= ~(1 << 28);
- else
- reg_tarc1 |= (1 << 28);
-
- ew32(TARC1, reg_tarc1);
- break;
- case e1000_ich8lan:
- /* Reduce concurrent DMA requests to 3 from 4 */
- if ((hw->revision_id < 3) ||
- ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
- (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))
- reg_tarc0 |= ((1 << 29)|(1 << 28));
-
- reg_ctrl_ext = er32(CTRL_EXT);
- reg_ctrl_ext |= (1 << 22);
- ew32(CTRL_EXT, reg_ctrl_ext);
-
- /* workaround TX hang with TSO=on */
- reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23));
-
- /* Multiple read bit is reversed polarity */
- reg_tctl = er32(TCTL);
- reg_tarc1 = er32(TARC1);
- if (reg_tctl & E1000_TCTL_MULR)
- reg_tarc1 &= ~(1 << 28);
- else
- reg_tarc1 |= (1 << 28);
-
- /* workaround TX hang with TSO=on */
- reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24));
-
- ew32(TARC1, reg_tarc1);
- break;
- default:
- break;
- }
-
- ew32(TARC0, reg_tarc0);
- }
+ DEBUGFUNC("e1000_reset_hw");
+
+ /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ E1000_WRITE_FLUSH();
+
+ /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
+ hw->tbi_compatibility_on = false;
+
+ /* Delay to allow any outstanding PCI transactions to complete before
+ * resetting the device
+ */
+ msleep(10);
+
+ ctrl = er32(CTRL);
+
+ /* Must reset the PHY before resetting the MAC */
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
+ msleep(5);
+ }
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ DEBUGOUT("Issuing a global reset to MAC\n");
+
+ switch (hw->mac_type) {
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ /* These controllers can't ack the 64-bit write when issuing the
+ * reset, so use IO-mapping as a workaround to issue the reset */
+ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ /* Reset is performed on a shadow of the control register */
+ ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
+ break;
+ default:
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ }
+
+ /* After MAC reset, force reload of EEPROM to restore power-on settings to
+ * device. Later controllers reload the EEPROM automatically, so just wait
+ * for reload to complete.
+ */
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* Wait for reset to complete */
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ /* Wait for EEPROM reload */
+ msleep(2);
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ /* Wait for EEPROM reload */
+ msleep(20);
+ break;
+ default:
+ /* Auto read done will delay 5ms or poll based on mac type */
+ ret_val = e1000_get_auto_rd_done(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ /* Disable HW ARPs on ASF enabled adapters */
+ if (hw->mac_type >= e1000_82540) {
+ manc = er32(MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ ew32(MANC, manc);
+ }
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ e1000_phy_init_script(hw);
+
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ DEBUGOUT("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr = er32(ICR);
+
+ /* If MWI was previously enabled, reenable it. */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Performs basic configuration of the adapter.
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_init_hw: Performs basic configuration of the adapter.
+ * @hw: Struct containing variables accessed by shared code
*
* Assumes that the controller has previously been reset and is in a
* post-reset uninitialized state. Initializes the receive address registers,
* multicast table, and VLAN filter table. Calls routines to setup link
* configuration and flow control settings. Clears all on-chip counters. Leaves
* the transmit and receive units disabled and uninitialized.
- *****************************************************************************/
+ */
s32 e1000_init_hw(struct e1000_hw *hw)
{
- u32 ctrl;
- u32 i;
- s32 ret_val;
- u32 mta_size;
- u32 reg_data;
- u32 ctrl_ext;
-
- DEBUGFUNC("e1000_init_hw");
-
- /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */
- if ((hw->mac_type == e1000_ich8lan) &&
- ((hw->revision_id < 3) ||
- ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) &&
- (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) {
- reg_data = er32(STATUS);
- reg_data &= ~0x80000000;
- ew32(STATUS, reg_data);
- }
-
- /* Initialize Identification LED */
- ret_val = e1000_id_led_init(hw);
- if (ret_val) {
- DEBUGOUT("Error Initializing Identification LED\n");
- return ret_val;
- }
-
- /* Set the media type and TBI compatibility */
- e1000_set_media_type(hw);
-
- /* Must be called after e1000_set_media_type because media_type is used */
- e1000_initialize_hardware_bits(hw);
-
- /* Disabling VLAN filtering. */
- DEBUGOUT("Initializing the IEEE VLAN\n");
- /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */
- if (hw->mac_type != e1000_ich8lan) {
- if (hw->mac_type < e1000_82545_rev_3)
- ew32(VET, 0);
- e1000_clear_vfta(hw);
- }
-
- /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
- if (hw->mac_type == e1000_82542_rev2_0) {
- DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
- e1000_pci_clear_mwi(hw);
- ew32(RCTL, E1000_RCTL_RST);
- E1000_WRITE_FLUSH();
- msleep(5);
- }
-
- /* Setup the receive address. This involves initializing all of the Receive
- * Address Registers (RARs 0 - 15).
- */
- e1000_init_rx_addrs(hw);
-
- /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
- if (hw->mac_type == e1000_82542_rev2_0) {
- ew32(RCTL, 0);
- E1000_WRITE_FLUSH();
- msleep(1);
- if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
- e1000_pci_set_mwi(hw);
- }
-
- /* Zero out the Multicast HASH table */
- DEBUGOUT("Zeroing the MTA\n");
- mta_size = E1000_MC_TBL_SIZE;
- if (hw->mac_type == e1000_ich8lan)
- mta_size = E1000_MC_TBL_SIZE_ICH8LAN;
- for (i = 0; i < mta_size; i++) {
- E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
- /* use write flush to prevent Memory Write Block (MWB) from
- * occuring when accessing our register space */
- E1000_WRITE_FLUSH();
- }
-
- /* Set the PCI priority bit correctly in the CTRL register. This
- * determines if the adapter gives priority to receives, or if it
- * gives equal priority to transmits and receives. Valid only on
- * 82542 and 82543 silicon.
- */
- if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
- ctrl = er32(CTRL);
- ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
- }
-
- switch (hw->mac_type) {
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- break;
- default:
- /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
- if (hw->bus_type == e1000_bus_type_pcix && e1000_pcix_get_mmrbc(hw) > 2048)
- e1000_pcix_set_mmrbc(hw, 2048);
- break;
- }
-
- /* More time needed for PHY to initialize */
- if (hw->mac_type == e1000_ich8lan)
- msleep(15);
-
- /* Call a subroutine to configure the link and setup flow control. */
- ret_val = e1000_setup_link(hw);
-
- /* Set the transmit descriptor write-back policy */
- if (hw->mac_type > e1000_82544) {
- ctrl = er32(TXDCTL);
- ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
- ew32(TXDCTL, ctrl);
- }
-
- if (hw->mac_type == e1000_82573) {
- e1000_enable_tx_pkt_filtering(hw);
- }
-
- switch (hw->mac_type) {
- default:
- break;
- case e1000_80003es2lan:
- /* Enable retransmit on late collisions */
- reg_data = er32(TCTL);
- reg_data |= E1000_TCTL_RTLC;
- ew32(TCTL, reg_data);
-
- /* Configure Gigabit Carry Extend Padding */
- reg_data = er32(TCTL_EXT);
- reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
- reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX;
- ew32(TCTL_EXT, reg_data);
-
- /* Configure Transmit Inter-Packet Gap */
- reg_data = er32(TIPG);
- reg_data &= ~E1000_TIPG_IPGT_MASK;
- reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
- ew32(TIPG, reg_data);
-
- reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001);
- reg_data &= ~0x00100000;
- E1000_WRITE_REG_ARRAY(hw, FFLT, 0x0001, reg_data);
- /* Fall through */
- case e1000_82571:
- case e1000_82572:
- case e1000_ich8lan:
- ctrl = er32(TXDCTL1);
- ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB;
- ew32(TXDCTL1, ctrl);
- break;
- }
-
-
- if (hw->mac_type == e1000_82573) {
- u32 gcr = er32(GCR);
- gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
- ew32(GCR, gcr);
- }
-
- /* Clear all of the statistics registers (clear on read). It is
- * important that we do this after we have tried to establish link
- * because the symbol error count will increment wildly if there
- * is no link.
- */
- e1000_clear_hw_cntrs(hw);
-
- /* ICH8 No-snoop bits are opposite polarity.
- * Set to snoop by default after reset. */
- if (hw->mac_type == e1000_ich8lan)
- e1000_set_pci_ex_no_snoop(hw, PCI_EX_82566_SNOOP_ALL);
-
- if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
- hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
- ctrl_ext = er32(CTRL_EXT);
- /* Relaxed ordering must be disabled to avoid a parity
- * error crash in a PCI slot. */
- ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
- ew32(CTRL_EXT, ctrl_ext);
- }
-
- return ret_val;
-}
+ u32 ctrl;
+ u32 i;
+ s32 ret_val;
+ u32 mta_size;
+ u32 ctrl_ext;
-/******************************************************************************
- * Adjust SERDES output amplitude based on EEPROM setting.
- *
- * hw - Struct containing variables accessed by shared code.
- *****************************************************************************/
-static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
-{
- u16 eeprom_data;
- s32 ret_val;
-
- DEBUGFUNC("e1000_adjust_serdes_amplitude");
-
- if (hw->media_type != e1000_media_type_internal_serdes)
- return E1000_SUCCESS;
-
- switch (hw->mac_type) {
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- break;
- default:
- return E1000_SUCCESS;
- }
-
- ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1, &eeprom_data);
- if (ret_val) {
- return ret_val;
- }
-
- if (eeprom_data != EEPROM_RESERVED_WORD) {
- /* Adjust SERDES output amplitude only. */
- eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
- if (ret_val)
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
+ DEBUGFUNC("e1000_init_hw");
-/******************************************************************************
- * Configures flow control and link settings.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Determines which flow control settings to use. Calls the apropriate media-
- * specific link configuration function. Configures the flow control settings.
- * Assuming the adapter has a valid link partner, a valid link should be
- * established. Assumes the hardware has previously been reset and the
- * transmitter and receiver are not enabled.
- *****************************************************************************/
-s32 e1000_setup_link(struct e1000_hw *hw)
-{
- u32 ctrl_ext;
- s32 ret_val;
- u16 eeprom_data;
-
- DEBUGFUNC("e1000_setup_link");
-
- /* In the case of the phy reset being blocked, we already have a link.
- * We do not have to set it up again. */
- if (e1000_check_phy_reset_block(hw))
- return E1000_SUCCESS;
-
- /* Read and store word 0x0F of the EEPROM. This word contains bits
- * that determine the hardware's default PAUSE (flow control) mode,
- * a bit that determines whether the HW defaults to enabling or
- * disabling auto-negotiation, and the direction of the
- * SW defined pins. If there is no SW over-ride of the flow
- * control setting, then the variable hw->fc will
- * be initialized based on a value in the EEPROM.
- */
- if (hw->fc == E1000_FC_DEFAULT) {
- switch (hw->mac_type) {
- case e1000_ich8lan:
- case e1000_82573:
- hw->fc = E1000_FC_FULL;
- break;
- default:
- ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
- 1, &eeprom_data);
- if (ret_val) {
- DEBUGOUT("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
- hw->fc = E1000_FC_NONE;
- else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
- EEPROM_WORD0F_ASM_DIR)
- hw->fc = E1000_FC_TX_PAUSE;
- else
- hw->fc = E1000_FC_FULL;
- break;
- }
- }
-
- /* We want to save off the original Flow Control configuration just
- * in case we get disconnected and then reconnected into a different
- * hub or switch with different Flow Control capabilities.
- */
- if (hw->mac_type == e1000_82542_rev2_0)
- hw->fc &= (~E1000_FC_TX_PAUSE);
-
- if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
- hw->fc &= (~E1000_FC_RX_PAUSE);
-
- hw->original_fc = hw->fc;
-
- DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
-
- /* Take the 4 bits from EEPROM word 0x0F that determine the initial
- * polarity value for the SW controlled pins, and setup the
- * Extended Device Control reg with that info.
- * This is needed because one of the SW controlled pins is used for
- * signal detection. So this should be done before e1000_setup_pcs_link()
- * or e1000_phy_setup() is called.
- */
- if (hw->mac_type == e1000_82543) {
- ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
- 1, &eeprom_data);
- if (ret_val) {
- DEBUGOUT("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
- SWDPIO__EXT_SHIFT);
- ew32(CTRL_EXT, ctrl_ext);
- }
-
- /* Call the necessary subroutine to configure the link. */
- ret_val = (hw->media_type == e1000_media_type_copper) ?
- e1000_setup_copper_link(hw) :
- e1000_setup_fiber_serdes_link(hw);
-
- /* Initialize the flow control address, type, and PAUSE timer
- * registers to their default values. This is done even if flow
- * control is disabled, because it does not hurt anything to
- * initialize these registers.
- */
- DEBUGOUT("Initializing the Flow Control address, type and timer regs\n");
-
- /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */
- if (hw->mac_type != e1000_ich8lan) {
- ew32(FCT, FLOW_CONTROL_TYPE);
- ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
- ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
- }
-
- ew32(FCTTV, hw->fc_pause_time);
-
- /* Set the flow control receive threshold registers. Normally,
- * these registers will be set to a default threshold that may be
- * adjusted later by the driver's runtime code. However, if the
- * ability to transmit pause frames in not enabled, then these
- * registers will be set to 0.
- */
- if (!(hw->fc & E1000_FC_TX_PAUSE)) {
- ew32(FCRTL, 0);
- ew32(FCRTH, 0);
- } else {
- /* We need to set up the Receive Threshold high and low water marks
- * as well as (optionally) enabling the transmission of XON frames.
- */
- if (hw->fc_send_xon) {
- ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
- ew32(FCRTH, hw->fc_high_water);
- } else {
- ew32(FCRTL, hw->fc_low_water);
- ew32(FCRTH, hw->fc_high_water);
- }
- }
- return ret_val;
-}
+ /* Initialize Identification LED */
+ ret_val = e1000_id_led_init(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Initializing Identification LED\n");
+ return ret_val;
+ }
-/******************************************************************************
- * Sets up link for a fiber based or serdes based adapter
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Manipulates Physical Coding Sublayer functions in order to configure
- * link. Assumes the hardware has been previously reset and the transmitter
- * and receiver are not enabled.
- *****************************************************************************/
-static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
-{
- u32 ctrl;
- u32 status;
- u32 txcw = 0;
- u32 i;
- u32 signal = 0;
- s32 ret_val;
-
- DEBUGFUNC("e1000_setup_fiber_serdes_link");
-
- /* On 82571 and 82572 Fiber connections, SerDes loopback mode persists
- * until explicitly turned off or a power cycle is performed. A read to
- * the register does not indicate its status. Therefore, we ensure
- * loopback mode is disabled during initialization.
- */
- if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572)
- ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK);
-
- /* On adapters with a MAC newer than 82544, SWDP 1 will be
- * set when the optics detect a signal. On older adapters, it will be
- * cleared when there is a signal. This applies to fiber media only.
- * If we're on serdes media, adjust the output amplitude to value
- * set in the EEPROM.
- */
- ctrl = er32(CTRL);
- if (hw->media_type == e1000_media_type_fiber)
- signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
-
- ret_val = e1000_adjust_serdes_amplitude(hw);
- if (ret_val)
- return ret_val;
-
- /* Take the link out of reset */
- ctrl &= ~(E1000_CTRL_LRST);
-
- /* Adjust VCO speed to improve BER performance */
- ret_val = e1000_set_vco_speed(hw);
- if (ret_val)
- return ret_val;
-
- e1000_config_collision_dist(hw);
-
- /* Check for a software override of the flow control settings, and setup
- * the device accordingly. If auto-negotiation is enabled, then software
- * will have to set the "PAUSE" bits to the correct value in the Tranmsit
- * Config Word Register (TXCW) and re-start auto-negotiation. However, if
- * auto-negotiation is disabled, then software will have to manually
- * configure the two flow control enable bits in the CTRL register.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames, but
- * not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but we do
- * not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- */
- switch (hw->fc) {
- case E1000_FC_NONE:
- /* Flow control is completely disabled by a software over-ride. */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
- break;
- case E1000_FC_RX_PAUSE:
- /* RX Flow control is enabled and TX Flow control is disabled by a
- * software over-ride. Since there really isn't a way to advertise
- * that we are capable of RX Pause ONLY, we will advertise that we
- * support both symmetric and asymmetric RX PAUSE. Later, we will
- * disable the adapter's ability to send PAUSE frames.
- */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
- break;
- case E1000_FC_TX_PAUSE:
- /* TX Flow control is enabled, and RX Flow control is disabled, by a
- * software over-ride.
- */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
- break;
- case E1000_FC_FULL:
- /* Flow control (both RX and TX) is enabled by a software over-ride. */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
- break;
- default:
- DEBUGOUT("Flow control param set incorrectly\n");
- return -E1000_ERR_CONFIG;
- break;
- }
-
- /* Since auto-negotiation is enabled, take the link out of reset (the link
- * will be in reset, because we previously reset the chip). This will
- * restart auto-negotiation. If auto-neogtiation is successful then the
- * link-up status bit will be set and the flow control enable bits (RFCE
- * and TFCE) will be set according to their negotiated value.
- */
- DEBUGOUT("Auto-negotiation enabled\n");
-
- ew32(TXCW, txcw);
- ew32(CTRL, ctrl);
- E1000_WRITE_FLUSH();
-
- hw->txcw = txcw;
- msleep(1);
-
- /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
- * indication in the Device Status Register. Time-out if a link isn't
- * seen in 500 milliseconds seconds (Auto-negotiation should complete in
- * less than 500 milliseconds even if the other end is doing it in SW).
- * For internal serdes, we just assume a signal is present, then poll.
- */
- if (hw->media_type == e1000_media_type_internal_serdes ||
- (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
- DEBUGOUT("Looking for Link\n");
- for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
- msleep(10);
- status = er32(STATUS);
- if (status & E1000_STATUS_LU) break;
- }
- if (i == (LINK_UP_TIMEOUT / 10)) {
- DEBUGOUT("Never got a valid link from auto-neg!!!\n");
- hw->autoneg_failed = 1;
- /* AutoNeg failed to achieve a link, so we'll call
- * e1000_check_for_link. This routine will force the link up if
- * we detect a signal. This will allow us to communicate with
- * non-autonegotiating link partners.
- */
- ret_val = e1000_check_for_link(hw);
- if (ret_val) {
- DEBUGOUT("Error while checking for link\n");
- return ret_val;
- }
- hw->autoneg_failed = 0;
- } else {
- hw->autoneg_failed = 0;
- DEBUGOUT("Valid Link Found\n");
- }
- } else {
- DEBUGOUT("No Signal Detected\n");
- }
- return E1000_SUCCESS;
-}
+ /* Set the media type and TBI compatibility */
+ e1000_set_media_type(hw);
+
+ /* Disabling VLAN filtering. */
+ DEBUGOUT("Initializing the IEEE VLAN\n");
+ if (hw->mac_type < e1000_82545_rev_3)
+ ew32(VET, 0);
+ e1000_clear_vfta(hw);
+
+ /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ ew32(RCTL, E1000_RCTL_RST);
+ E1000_WRITE_FLUSH();
+ msleep(5);
+ }
-/******************************************************************************
-* Make sure we have a valid PHY and change PHY mode before link setup.
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_copper_link_preconfig");
-
- ctrl = er32(CTRL);
- /* With 82543, we need to force speed and duplex on the MAC equal to what
- * the PHY speed and duplex configuration is. In addition, we need to
- * perform a hardware reset on the PHY to take it out of reset.
- */
- if (hw->mac_type > e1000_82543) {
- ctrl |= E1000_CTRL_SLU;
- ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ew32(CTRL, ctrl);
- } else {
- ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
- ew32(CTRL, ctrl);
- ret_val = e1000_phy_hw_reset(hw);
- if (ret_val)
- return ret_val;
- }
-
- /* Make sure we have a valid PHY */
- ret_val = e1000_detect_gig_phy(hw);
- if (ret_val) {
- DEBUGOUT("Error, did not detect valid phy.\n");
- return ret_val;
- }
- DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
-
- /* Set PHY to class A mode (if necessary) */
- ret_val = e1000_set_phy_mode(hw);
- if (ret_val)
- return ret_val;
-
- if ((hw->mac_type == e1000_82545_rev_3) ||
- (hw->mac_type == e1000_82546_rev_3)) {
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- phy_data |= 0x00000008;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- }
-
- if (hw->mac_type <= e1000_82543 ||
- hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
- hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2)
- hw->phy_reset_disable = false;
-
- return E1000_SUCCESS;
-}
+ /* Setup the receive address. This involves initializing all of the Receive
+ * Address Registers (RARs 0 - 15).
+ */
+ e1000_init_rx_addrs(hw);
+
+ /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ ew32(RCTL, 0);
+ E1000_WRITE_FLUSH();
+ msleep(1);
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+ /* Zero out the Multicast HASH table */
+ DEBUGOUT("Zeroing the MTA\n");
+ mta_size = E1000_MC_TBL_SIZE;
+ for (i = 0; i < mta_size; i++) {
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ /* use write flush to prevent Memory Write Block (MWB) from
+ * occurring when accessing our register space */
+ E1000_WRITE_FLUSH();
+ }
-/********************************************************************
-* Copper link setup for e1000_phy_igp series.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
-static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
-{
- u32 led_ctrl;
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_copper_link_igp_setup");
-
- if (hw->phy_reset_disable)
- return E1000_SUCCESS;
-
- ret_val = e1000_phy_reset(hw);
- if (ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
- return ret_val;
- }
-
- /* Wait 15ms for MAC to configure PHY from eeprom settings */
- msleep(15);
- if (hw->mac_type != e1000_ich8lan) {
- /* Configure activity LED after PHY reset */
- led_ctrl = er32(LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- ew32(LEDCTL, led_ctrl);
- }
-
- /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
- if (hw->phy_type == e1000_phy_igp) {
- /* disable lplu d3 during driver init */
- ret_val = e1000_set_d3_lplu_state(hw, false);
- if (ret_val) {
- DEBUGOUT("Error Disabling LPLU D3\n");
- return ret_val;
- }
- }
-
- /* disable lplu d0 during driver init */
- ret_val = e1000_set_d0_lplu_state(hw, false);
- if (ret_val) {
- DEBUGOUT("Error Disabling LPLU D0\n");
- return ret_val;
- }
- /* Configure mdi-mdix settings */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- hw->dsp_config_state = e1000_dsp_config_disabled;
- /* Force MDI for earlier revs of the IGP PHY */
- phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX);
- hw->mdix = 1;
-
- } else {
- hw->dsp_config_state = e1000_dsp_config_enabled;
- phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
-
- switch (hw->mdix) {
- case 1:
- phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 2:
- phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 0:
- default:
- phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
- break;
- }
- }
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- /* set auto-master slave resolution settings */
- if (hw->autoneg) {
- e1000_ms_type phy_ms_setting = hw->master_slave;
-
- if (hw->ffe_config_state == e1000_ffe_config_active)
- hw->ffe_config_state = e1000_ffe_config_enabled;
-
- if (hw->dsp_config_state == e1000_dsp_config_activated)
- hw->dsp_config_state = e1000_dsp_config_enabled;
-
- /* when autonegotiation advertisment is only 1000Mbps then we
- * should disable SmartSpeed and enable Auto MasterSlave
- * resolution as hardware default. */
- if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
- /* Disable SmartSpeed */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
- /* Set auto Master/Slave resolution process */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
- phy_data &= ~CR_1000T_MS_ENABLE;
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- /* load defaults for future use */
- hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
- ((phy_data & CR_1000T_MS_VALUE) ?
- e1000_ms_force_master :
- e1000_ms_force_slave) :
- e1000_ms_auto;
-
- switch (phy_ms_setting) {
- case e1000_ms_force_master:
- phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
- break;
- case e1000_ms_force_slave:
- phy_data |= CR_1000T_MS_ENABLE;
- phy_data &= ~(CR_1000T_MS_VALUE);
- break;
- case e1000_ms_auto:
- phy_data &= ~CR_1000T_MS_ENABLE;
- default:
- break;
- }
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
+ /* Set the PCI priority bit correctly in the CTRL register. This
+ * determines if the adapter gives priority to receives, or if it
+ * gives equal priority to transmits and receives. Valid only on
+ * 82542 and 82543 silicon.
+ */
+ if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
+ }
-/********************************************************************
-* Copper link setup for e1000_phy_gg82563 series.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
-static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
- u32 reg_data;
-
- DEBUGFUNC("e1000_copper_link_ggp_setup");
-
- if (!hw->phy_reset_disable) {
-
- /* Enable CRS on TX for half-duplex operation. */
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
- /* Use 25MHz for both link down and 1000BASE-T for Tx clock */
- phy_data |= GG82563_MSCR_TX_CLK_1000MBPS_25MHZ;
-
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL,
- phy_data);
- if (ret_val)
- return ret_val;
-
- /* Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
- * 1 - MDI mode
- * 2 - MDI-X mode
- * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
- */
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
-
- switch (hw->mdix) {
- case 1:
- phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
- break;
- case 2:
- phy_data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
- break;
- case 0:
- default:
- phy_data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
- break;
- }
-
- /* Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
- * 0 - Disabled
- * 1 - Enabled
- */
- phy_data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
- if (hw->disable_polarity_correction == 1)
- phy_data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL, phy_data);
-
- if (ret_val)
- return ret_val;
-
- /* SW Reset the PHY so all changes take effect */
- ret_val = e1000_phy_reset(hw);
- if (ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
- return ret_val;
- }
- } /* phy_reset_disable */
-
- if (hw->mac_type == e1000_80003es2lan) {
- /* Bypass RX and TX FIFO's */
- ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL,
- E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS |
- E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_SPEC_CTRL_2, phy_data);
-
- if (ret_val)
- return ret_val;
-
- reg_data = er32(CTRL_EXT);
- reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
- ew32(CTRL_EXT, reg_data);
-
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- /* Do not init these registers when the HW is in IAMT mode, since the
- * firmware will have already initialized them. We only initialize
- * them if the HW is not in IAMT mode.
- */
- if (!e1000_check_mng_mode(hw)) {
- /* Enable Electrical Idle on the PHY */
- phy_data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL,
- phy_data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL,
- phy_data);
-
- if (ret_val)
- return ret_val;
- }
-
- /* Workaround: Disable padding in Kumeran interface in the MAC
- * and in the PHY to avoid CRC errors.
- */
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
- &phy_data);
- if (ret_val)
- return ret_val;
- phy_data |= GG82563_ICR_DIS_PADDING;
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_INBAND_CTRL,
- phy_data);
- if (ret_val)
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
+ if (hw->bus_type == e1000_bus_type_pcix
+ && e1000_pcix_get_mmrbc(hw) > 2048)
+ e1000_pcix_set_mmrbc(hw, 2048);
+ break;
+ }
-/********************************************************************
-* Copper link setup for e1000_phy_m88 series.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
-static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_copper_link_mgp_setup");
-
- if (hw->phy_reset_disable)
- return E1000_SUCCESS;
-
- /* Enable CRS on TX. This must be set for half-duplex operation. */
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-
- /* Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
- * 1 - MDI mode
- * 2 - MDI-X mode
- * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
- */
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-
- switch (hw->mdix) {
- case 1:
- phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
- break;
- case 2:
- phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
- break;
- case 3:
- phy_data |= M88E1000_PSCR_AUTO_X_1000T;
- break;
- case 0:
- default:
- phy_data |= M88E1000_PSCR_AUTO_X_MODE;
- break;
- }
-
- /* Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
- * 0 - Disabled
- * 1 - Enabled
- */
- phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
- if (hw->disable_polarity_correction == 1)
- phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- if (hw->phy_revision < M88E1011_I_REV_4) {
- /* Force TX_CLK in the Extended PHY Specific Control Register
- * to 25MHz clock.
- */
- ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
- if ((hw->phy_revision == E1000_REVISION_2) &&
- (hw->phy_id == M88E1111_I_PHY_ID)) {
- /* Vidalia Phy, set the downshift counter to 5x */
- phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
- phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
- ret_val = e1000_write_phy_reg(hw,
- M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- } else {
- /* Configure Master and Slave downshift values */
- phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
- phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
- ret_val = e1000_write_phy_reg(hw,
- M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
- }
-
- /* SW Reset the PHY so all changes take effect */
- ret_val = e1000_phy_reset(hw);
- if (ret_val) {
- DEBUGOUT("Error Resetting the PHY\n");
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
+ /* Call a subroutine to configure the link and setup flow control. */
+ ret_val = e1000_setup_link(hw);
-/********************************************************************
-* Setup auto-negotiation and flow control advertisements,
-* and then perform auto-negotiation.
-*
-* hw - Struct containing variables accessed by shared code
-*********************************************************************/
-static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_copper_link_autoneg");
-
- /* Perform some bounds checking on the hw->autoneg_advertised
- * parameter. If this variable is zero, then set it to the default.
- */
- hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
-
- /* If autoneg_advertised is zero, we assume it was not defaulted
- * by the calling code so we set to advertise full capability.
- */
- if (hw->autoneg_advertised == 0)
- hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-
- /* IFE phy only supports 10/100 */
- if (hw->phy_type == e1000_phy_ife)
- hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
-
- DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
- ret_val = e1000_phy_setup_autoneg(hw);
- if (ret_val) {
- DEBUGOUT("Error Setting up Auto-Negotiation\n");
- return ret_val;
- }
- DEBUGOUT("Restarting Auto-Neg\n");
-
- /* Restart auto-negotiation by setting the Auto Neg Enable bit and
- * the Auto Neg Restart bit in the PHY control register.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
- ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- /* Does the user want to wait for Auto-Neg to complete here, or
- * check at a later time (for example, callback routine).
- */
- if (hw->wait_autoneg_complete) {
- ret_val = e1000_wait_autoneg(hw);
- if (ret_val) {
- DEBUGOUT("Error while waiting for autoneg to complete\n");
- return ret_val;
- }
- }
-
- hw->get_link_status = true;
-
- return E1000_SUCCESS;
-}
+ /* Set the transmit descriptor write-back policy */
+ if (hw->mac_type > e1000_82544) {
+ ctrl = er32(TXDCTL);
+ ctrl =
+ (ctrl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ ew32(TXDCTL, ctrl);
+ }
-/******************************************************************************
-* Config the MAC and the PHY after link is up.
-* 1) Set up the MAC to the current PHY speed/duplex
-* if we are on 82543. If we
-* are on newer silicon, we only need to configure
-* collision distance in the Transmit Control Register.
-* 2) Set up flow control on the MAC to that established with
-* the link partner.
-* 3) Config DSP to improve Gigabit link quality for some PHY revisions.
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
-{
- s32 ret_val;
- DEBUGFUNC("e1000_copper_link_postconfig");
-
- if (hw->mac_type >= e1000_82544) {
- e1000_config_collision_dist(hw);
- } else {
- ret_val = e1000_config_mac_to_phy(hw);
- if (ret_val) {
- DEBUGOUT("Error configuring MAC to PHY settings\n");
- return ret_val;
- }
- }
- ret_val = e1000_config_fc_after_link_up(hw);
- if (ret_val) {
- DEBUGOUT("Error Configuring Flow Control\n");
- return ret_val;
- }
-
- /* Config DSP to improve Giga link quality */
- if (hw->phy_type == e1000_phy_igp) {
- ret_val = e1000_config_dsp_after_link_change(hw, true);
- if (ret_val) {
- DEBUGOUT("Error Configuring DSP after link up\n");
- return ret_val;
- }
- }
-
- return E1000_SUCCESS;
-}
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs(hw);
+
+ if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
+ hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
+ ctrl_ext = er32(CTRL_EXT);
+ /* Relaxed ordering must be disabled to avoid a parity
+ * error crash in a PCI slot. */
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
-/******************************************************************************
-* Detects which PHY is present and setup the speed and duplex
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_setup_copper_link(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 i;
- u16 phy_data;
- u16 reg_data = 0;
-
- DEBUGFUNC("e1000_setup_copper_link");
-
- switch (hw->mac_type) {
- case e1000_80003es2lan:
- case e1000_ich8lan:
- /* Set the mac to wait the maximum time between each
- * iteration and increase the max iterations when
- * polling the phy; this fixes erroneous timeouts at 10Mbps. */
- ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 4), 0xFFFF);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_kmrn_reg(hw, GG82563_REG(0x34, 9), ®_data);
- if (ret_val)
- return ret_val;
- reg_data |= 0x3F;
- ret_val = e1000_write_kmrn_reg(hw, GG82563_REG(0x34, 9), reg_data);
- if (ret_val)
- return ret_val;
- default:
- break;
- }
-
- /* Check if it is a valid PHY and set PHY mode if necessary. */
- ret_val = e1000_copper_link_preconfig(hw);
- if (ret_val)
- return ret_val;
-
- switch (hw->mac_type) {
- case e1000_80003es2lan:
- /* Kumeran registers are written-only */
- reg_data = E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT;
- reg_data |= E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING;
- ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_INB_CTRL,
- reg_data);
- if (ret_val)
- return ret_val;
- break;
- default:
- break;
- }
-
- if (hw->phy_type == e1000_phy_igp ||
- hw->phy_type == e1000_phy_igp_3 ||
- hw->phy_type == e1000_phy_igp_2) {
- ret_val = e1000_copper_link_igp_setup(hw);
- if (ret_val)
- return ret_val;
- } else if (hw->phy_type == e1000_phy_m88) {
- ret_val = e1000_copper_link_mgp_setup(hw);
- if (ret_val)
- return ret_val;
- } else if (hw->phy_type == e1000_phy_gg82563) {
- ret_val = e1000_copper_link_ggp_setup(hw);
- if (ret_val)
- return ret_val;
- }
-
- if (hw->autoneg) {
- /* Setup autoneg and flow control advertisement
- * and perform autonegotiation */
- ret_val = e1000_copper_link_autoneg(hw);
- if (ret_val)
- return ret_val;
- } else {
- /* PHY will be set to 10H, 10F, 100H,or 100F
- * depending on value from forced_speed_duplex. */
- DEBUGOUT("Forcing speed and duplex\n");
- ret_val = e1000_phy_force_speed_duplex(hw);
- if (ret_val) {
- DEBUGOUT("Error Forcing Speed and Duplex\n");
- return ret_val;
- }
- }
-
- /* Check link status. Wait up to 100 microseconds for link to become
- * valid.
- */
- for (i = 0; i < 10; i++) {
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (phy_data & MII_SR_LINK_STATUS) {
- /* Config the MAC and PHY after link is up */
- ret_val = e1000_copper_link_postconfig(hw);
- if (ret_val)
- return ret_val;
-
- DEBUGOUT("Valid link established!!!\n");
- return E1000_SUCCESS;
- }
- udelay(10);
- }
-
- DEBUGOUT("Unable to establish link!!!\n");
- return E1000_SUCCESS;
+ return ret_val;
}
-/******************************************************************************
-* Configure the MAC-to-PHY interface for 10/100Mbps
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex)
+/**
+ * e1000_adjust_serdes_amplitude - Adjust SERDES output amplitude based on EEPROM setting.
+ * @hw: Struct containing variables accessed by shared code.
+ */
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
- u32 tipg;
- u16 reg_data;
-
- DEBUGFUNC("e1000_configure_kmrn_for_10_100");
+ u16 eeprom_data;
+ s32 ret_val;
- reg_data = E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT;
- ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
- if (ret_val)
- return ret_val;
+ DEBUGFUNC("e1000_adjust_serdes_amplitude");
- /* Configure Transmit Inter-Packet Gap */
- tipg = er32(TIPG);
- tipg &= ~E1000_TIPG_IPGT_MASK;
- tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100;
- ew32(TIPG, tipg);
+ if (hw->media_type != e1000_media_type_internal_serdes)
+ return E1000_SUCCESS;
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
-
- if (ret_val)
- return ret_val;
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
- if (duplex == HALF_DUPLEX)
- reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
- else
- reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+ ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
+ &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+ if (eeprom_data != EEPROM_RESERVED_WORD) {
+ /* Adjust SERDES output amplitude only. */
+ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
+ if (ret_val)
+ return ret_val;
+ }
- return ret_val;
+ return E1000_SUCCESS;
}
-static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw)
+/**
+ * e1000_setup_link - Configures flow control and link settings.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Determines which flow control settings to use. Calls the appropriate media-
+ * specific link configuration function. Configures the flow control settings.
+ * Assuming the adapter has a valid link partner, a valid link should be
+ * established. Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ */
+s32 e1000_setup_link(struct e1000_hw *hw)
{
- s32 ret_val = E1000_SUCCESS;
- u16 reg_data;
- u32 tipg;
+ u32 ctrl_ext;
+ s32 ret_val;
+ u16 eeprom_data;
- DEBUGFUNC("e1000_configure_kmrn_for_1000");
+ DEBUGFUNC("e1000_setup_link");
- reg_data = E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT;
- ret_val = e1000_write_kmrn_reg(hw, E1000_KUMCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
- if (ret_val)
- return ret_val;
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (hw->fc == E1000_FC_DEFAULT) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = E1000_FC_NONE;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else
+ hw->fc = E1000_FC_FULL;
+ }
- /* Configure Transmit Inter-Packet Gap */
- tipg = er32(TIPG);
- tipg &= ~E1000_TIPG_IPGT_MASK;
- tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000;
- ew32(TIPG, tipg);
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ hw->fc &= (~E1000_FC_TX_PAUSE);
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+ if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+ hw->fc &= (~E1000_FC_RX_PAUSE);
- if (ret_val)
- return ret_val;
+ hw->original_fc = hw->fc;
- reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+ DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc);
- return ret_val;
-}
+ /* Take the 4 bits from EEPROM word 0x0F that determine the initial
+ * polarity value for the SW controlled pins, and setup the
+ * Extended Device Control reg with that info.
+ * This is needed because one of the SW controlled pins is used for
+ * signal detection. So this should be done before e1000_setup_pcs_link()
+ * or e1000_phy_setup() is called.
+ */
+ if (hw->mac_type == e1000_82543) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
+ SWDPIO__EXT_SHIFT);
+ ew32(CTRL_EXT, ctrl_ext);
+ }
-/******************************************************************************
-* Configures PHY autoneg and flow control advertisement settings
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 mii_autoneg_adv_reg;
- u16 mii_1000t_ctrl_reg;
-
- DEBUGFUNC("e1000_phy_setup_autoneg");
-
- /* Read the MII Auto-Neg Advertisement Register (Address 4). */
- ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
- if (ret_val)
- return ret_val;
-
- if (hw->phy_type != e1000_phy_ife) {
- /* Read the MII 1000Base-T Control Register (Address 9). */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
- if (ret_val)
- return ret_val;
- } else
- mii_1000t_ctrl_reg=0;
-
- /* Need to parse both autoneg_advertised and fc and set up
- * the appropriate PHY registers. First we will parse for
- * autoneg_advertised software override. Since we can advertise
- * a plethora of combinations, we need to check each bit
- * individually.
- */
-
- /* First we clear all the 10/100 mb speed bits in the Auto-Neg
- * Advertisement Register (Address 4) and the 1000 mb speed bits in
- * the 1000Base-T Control Register (Address 9).
- */
- mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
- mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
-
- DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
-
- /* Do we want to advertise 10 Mb Half Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
- DEBUGOUT("Advertise 10mb Half duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
- }
-
- /* Do we want to advertise 10 Mb Full Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
- DEBUGOUT("Advertise 10mb Full duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
- }
-
- /* Do we want to advertise 100 Mb Half Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
- DEBUGOUT("Advertise 100mb Half duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
- }
-
- /* Do we want to advertise 100 Mb Full Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
- DEBUGOUT("Advertise 100mb Full duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
- }
-
- /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
- if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
- DEBUGOUT("Advertise 1000mb Half duplex requested, request denied!\n");
- }
-
- /* Do we want to advertise 1000 Mb Full Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
- DEBUGOUT("Advertise 1000mb Full duplex\n");
- mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
- if (hw->phy_type == e1000_phy_ife) {
- DEBUGOUT("e1000_phy_ife is a 10/100 PHY. Gigabit speed is not supported.\n");
- }
- }
-
- /* Check for a software override of the flow control settings, and
- * setup the PHY advertisement registers accordingly. If
- * auto-negotiation is enabled, then software will have to set the
- * "PAUSE" bits to the correct value in the Auto-Negotiation
- * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * but we do not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- * other: No software override. The flow control configuration
- * in the EEPROM is used.
- */
- switch (hw->fc) {
- case E1000_FC_NONE: /* 0 */
- /* Flow control (RX & TX) is completely disabled by a
- * software over-ride.
- */
- mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- case E1000_FC_RX_PAUSE: /* 1 */
- /* RX Flow control is enabled, and TX Flow control is
- * disabled, by a software over-ride.
- */
- /* Since there really isn't a way to advertise that we are
- * capable of RX Pause ONLY, we will advertise that we
- * support both symmetric and asymmetric RX PAUSE. Later
- * (in e1000_config_fc_after_link_up) we will disable the
- *hw's ability to send PAUSE frames.
- */
- mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- case E1000_FC_TX_PAUSE: /* 2 */
- /* TX Flow control is enabled, and RX Flow control is
- * disabled, by a software over-ride.
- */
- mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
- mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
- break;
- case E1000_FC_FULL: /* 3 */
- /* Flow control (both RX and TX) is enabled by a software
- * over-ride.
- */
- mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- default:
- DEBUGOUT("Flow control param set incorrectly\n");
- return -E1000_ERR_CONFIG;
- }
-
- ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
- if (ret_val)
- return ret_val;
-
- DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
-
- if (hw->phy_type != e1000_phy_ife) {
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
- if (ret_val)
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
+ /* Call the necessary subroutine to configure the link. */
+ ret_val = (hw->media_type == e1000_media_type_copper) ?
+ e1000_setup_copper_link(hw) : e1000_setup_fiber_serdes_link(hw);
-/******************************************************************************
-* Force PHY speed and duplex settings to hw->forced_speed_duplex
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
- u16 mii_ctrl_reg;
- u16 mii_status_reg;
- u16 phy_data;
- u16 i;
-
- DEBUGFUNC("e1000_phy_force_speed_duplex");
-
- /* Turn off Flow control if we are forcing speed and duplex. */
- hw->fc = E1000_FC_NONE;
-
- DEBUGOUT1("hw->fc = %d\n", hw->fc);
-
- /* Read the Device Control Register. */
- ctrl = er32(CTRL);
-
- /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
- ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ctrl &= ~(DEVICE_SPEED_MASK);
-
- /* Clear the Auto Speed Detect Enable bit. */
- ctrl &= ~E1000_CTRL_ASDE;
-
- /* Read the MII Control Register. */
- ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
- if (ret_val)
- return ret_val;
-
- /* We need to disable autoneg in order to force link and duplex. */
-
- mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
-
- /* Are we forcing Full or Half Duplex? */
- if (hw->forced_speed_duplex == e1000_100_full ||
- hw->forced_speed_duplex == e1000_10_full) {
- /* We want to force full duplex so we SET the full duplex bits in the
- * Device and MII Control Registers.
- */
- ctrl |= E1000_CTRL_FD;
- mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
- DEBUGOUT("Full Duplex\n");
- } else {
- /* We want to force half duplex so we CLEAR the full duplex bits in
- * the Device and MII Control Registers.
- */
- ctrl &= ~E1000_CTRL_FD;
- mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
- DEBUGOUT("Half Duplex\n");
- }
-
- /* Are we forcing 100Mbps??? */
- if (hw->forced_speed_duplex == e1000_100_full ||
- hw->forced_speed_duplex == e1000_100_half) {
- /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
- ctrl |= E1000_CTRL_SPD_100;
- mii_ctrl_reg |= MII_CR_SPEED_100;
- mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
- DEBUGOUT("Forcing 100mb ");
- } else {
- /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
- ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
- mii_ctrl_reg |= MII_CR_SPEED_10;
- mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
- DEBUGOUT("Forcing 10mb ");
- }
-
- e1000_config_collision_dist(hw);
-
- /* Write the configured values back to the Device Control Reg. */
- ew32(CTRL, ctrl);
-
- if ((hw->phy_type == e1000_phy_m88) ||
- (hw->phy_type == e1000_phy_gg82563)) {
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
- * forced whenever speed are duplex are forced.
- */
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
-
- /* Need to reset the PHY or these changes will be ignored */
- mii_ctrl_reg |= MII_CR_RESET;
-
- /* Disable MDI-X support for 10/100 */
- } else if (hw->phy_type == e1000_phy_ife) {
- ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IFE_PMC_AUTO_MDIX;
- phy_data &= ~IFE_PMC_FORCE_MDIX;
-
- ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data);
- if (ret_val)
- return ret_val;
-
- } else {
- /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
- * forced whenever speed or duplex are forced.
- */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
- phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
-
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- /* Write back the modified PHY MII control register. */
- ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
- if (ret_val)
- return ret_val;
-
- udelay(1);
-
- /* The wait_autoneg_complete flag may be a little misleading here.
- * Since we are forcing speed and duplex, Auto-Neg is not enabled.
- * But we do want to delay for a period while forcing only so we
- * don't generate false No Link messages. So we will wait here
- * only if the user has set wait_autoneg_complete to 1, which is
- * the default.
- */
- if (hw->wait_autoneg_complete) {
- /* We will wait for autoneg to complete. */
- DEBUGOUT("Waiting for forced speed/duplex link.\n");
- mii_status_reg = 0;
-
- /* We will wait for autoneg to complete or 4.5 seconds to expire. */
- for (i = PHY_FORCE_TIME; i > 0; i--) {
- /* Read the MII Status Register and wait for Auto-Neg Complete bit
- * to be set.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if (mii_status_reg & MII_SR_LINK_STATUS) break;
- msleep(100);
- }
- if ((i == 0) &&
- ((hw->phy_type == e1000_phy_m88) ||
- (hw->phy_type == e1000_phy_gg82563))) {
- /* We didn't get link. Reset the DSP and wait again for link. */
- ret_val = e1000_phy_reset_dsp(hw);
- if (ret_val) {
- DEBUGOUT("Error Resetting PHY DSP\n");
- return ret_val;
- }
- }
- /* This loop will early-out if the link condition has been met. */
- for (i = PHY_FORCE_TIME; i > 0; i--) {
- if (mii_status_reg & MII_SR_LINK_STATUS) break;
- msleep(100);
- /* Read the MII Status Register and wait for Auto-Neg Complete bit
- * to be set.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
- }
- }
-
- if (hw->phy_type == e1000_phy_m88) {
- /* Because we reset the PHY above, we need to re-force TX_CLK in the
- * Extended PHY Specific Control Register to 25MHz clock. This value
- * defaults back to a 2.5MHz clock when the PHY is reset.
- */
- ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
- ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- /* In addition, because of the s/w reset above, we need to enable CRS on
- * TX. This must be set for both full and half duplex operation.
- */
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
- (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full ||
- hw->forced_speed_duplex == e1000_10_half)) {
- ret_val = e1000_polarity_reversal_workaround(hw);
- if (ret_val)
- return ret_val;
- }
- } else if (hw->phy_type == e1000_phy_gg82563) {
- /* The TX_CLK of the Extended PHY Specific Control Register defaults
- * to 2.5MHz on a reset. We need to re-force it back to 25MHz, if
- * we're not in a forced 10/duplex configuration. */
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
- if ((hw->forced_speed_duplex == e1000_10_full) ||
- (hw->forced_speed_duplex == e1000_10_half))
- phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ;
- else
- phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25MHZ;
-
- /* Also due to the reset, we need to enable CRS on Tx. */
- phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
-
- ret_val = e1000_write_phy_reg(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
- return E1000_SUCCESS;
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ DEBUGOUT
+ ("Initializing the Flow Control address, type and timer regs\n");
+
+ ew32(FCT, FLOW_CONTROL_TYPE);
+ ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ ew32(FCTTV, hw->fc_pause_time);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc & E1000_FC_TX_PAUSE)) {
+ ew32(FCRTL, 0);
+ ew32(FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water marks
+ * as well as (optionally) enabling the transmission of XON frames.
+ */
+ if (hw->fc_send_xon) {
+ ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
+ ew32(FCRTH, hw->fc_high_water);
+ } else {
+ ew32(FCRTL, hw->fc_low_water);
+ ew32(FCRTH, hw->fc_high_water);
+ }
+ }
+ return ret_val;
}
-/******************************************************************************
-* Sets the collision distance in the Transmit Control register
-*
-* hw - Struct containing variables accessed by shared code
-*
-* Link should have been established previously. Reads the speed and duplex
-* information from the Device Status register.
-******************************************************************************/
-void e1000_config_collision_dist(struct e1000_hw *hw)
+/**
+ * e1000_setup_fiber_serdes_link - prepare fiber or serdes link
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Manipulates Physical Coding Sublayer functions in order to configure
+ * link. Assumes the hardware has been previously reset and the transmitter
+ * and receiver are not enabled.
+ */
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
{
- u32 tctl, coll_dist;
+ u32 ctrl;
+ u32 status;
+ u32 txcw = 0;
+ u32 i;
+ u32 signal = 0;
+ s32 ret_val;
- DEBUGFUNC("e1000_config_collision_dist");
+ DEBUGFUNC("e1000_setup_fiber_serdes_link");
- if (hw->mac_type < e1000_82543)
- coll_dist = E1000_COLLISION_DISTANCE_82542;
- else
- coll_dist = E1000_COLLISION_DISTANCE;
+ /* On adapters with a MAC newer than 82544, SWDP 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ * If we're on serdes media, adjust the output amplitude to value
+ * set in the EEPROM.
+ */
+ ctrl = er32(CTRL);
+ if (hw->media_type == e1000_media_type_fiber)
+ signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+
+ ret_val = e1000_adjust_serdes_amplitude(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Take the link out of reset */
+ ctrl &= ~(E1000_CTRL_LRST);
+
+ /* Adjust VCO speed to improve BER performance */
+ ret_val = e1000_set_vco_speed(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000_config_collision_dist(hw);
+
+ /* Check for a software override of the flow control settings, and setup
+ * the device accordingly. If auto-negotiation is enabled, then software
+ * will have to set the "PAUSE" bits to the correct value in the Tranmsit
+ * Config Word Register (TXCW) and re-start auto-negotiation. However, if
+ * auto-negotiation is disabled, then software will have to manually
+ * configure the two flow control enable bits in the CTRL register.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames, but
+ * not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do
+ * not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ /* Flow control is completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ break;
+ case E1000_FC_RX_PAUSE:
+ /* RX Flow control is enabled and TX Flow control is disabled by a
+ * software over-ride. Since there really isn't a way to advertise
+ * that we are capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ case E1000_FC_TX_PAUSE:
+ /* TX Flow control is enabled, and RX Flow control is disabled, by a
+ * software over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+ break;
+ case E1000_FC_FULL:
+ /* Flow control (both RX and TX) is enabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ /* Since auto-negotiation is enabled, take the link out of reset (the link
+ * will be in reset, because we previously reset the chip). This will
+ * restart auto-negotiation. If auto-negotiation is successful then the
+ * link-up status bit will be set and the flow control enable bits (RFCE
+ * and TFCE) will be set according to their negotiated value.
+ */
+ DEBUGOUT("Auto-negotiation enabled\n");
- tctl = er32(TCTL);
+ ew32(TXCW, txcw);
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
- tctl &= ~E1000_TCTL_COLD;
- tctl |= coll_dist << E1000_COLD_SHIFT;
+ hw->txcw = txcw;
+ msleep(1);
- ew32(TCTL, tctl);
- E1000_WRITE_FLUSH();
+ /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
+ * indication in the Device Status Register. Time-out if a link isn't
+ * seen in 500 milliseconds seconds (Auto-negotiation should complete in
+ * less than 500 milliseconds even if the other end is doing it in SW).
+ * For internal serdes, we just assume a signal is present, then poll.
+ */
+ if (hw->media_type == e1000_media_type_internal_serdes ||
+ (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+ DEBUGOUT("Looking for Link\n");
+ for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+ msleep(10);
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ break;
+ }
+ if (i == (LINK_UP_TIMEOUT / 10)) {
+ DEBUGOUT("Never got a valid link from auto-neg!!!\n");
+ hw->autoneg_failed = 1;
+ /* AutoNeg failed to achieve a link, so we'll call
+ * e1000_check_for_link. This routine will force the link up if
+ * we detect a signal. This will allow us to communicate with
+ * non-autonegotiating link partners.
+ */
+ ret_val = e1000_check_for_link(hw);
+ if (ret_val) {
+ DEBUGOUT("Error while checking for link\n");
+ return ret_val;
+ }
+ hw->autoneg_failed = 0;
+ } else {
+ hw->autoneg_failed = 0;
+ DEBUGOUT("Valid Link Found\n");
+ }
+ } else {
+ DEBUGOUT("No Signal Detected\n");
+ }
+ return E1000_SUCCESS;
}
-/******************************************************************************
-* Sets MAC speed and duplex settings to reflect the those in the PHY
-*
-* hw - Struct containing variables accessed by shared code
-* mii_reg - data to write to the MII control register
-*
-* The contents of the PHY register containing the needed information need to
-* be passed in.
-******************************************************************************/
-static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_config_mac_to_phy");
-
- /* 82544 or newer MAC, Auto Speed Detection takes care of
- * MAC speed/duplex configuration.*/
- if (hw->mac_type >= e1000_82544)
- return E1000_SUCCESS;
-
- /* Read the Device Control Register and set the bits to Force Speed
- * and Duplex.
- */
- ctrl = er32(CTRL);
- ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
-
- /* Set up duplex in the Device Control and Transmit Control
- * registers depending on negotiated values.
- */
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (phy_data & M88E1000_PSSR_DPLX)
- ctrl |= E1000_CTRL_FD;
- else
- ctrl &= ~E1000_CTRL_FD;
-
- e1000_config_collision_dist(hw);
-
- /* Set up speed in the Device Control register depending on
- * negotiated values.
- */
- if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
- ctrl |= E1000_CTRL_SPD_1000;
- else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
- ctrl |= E1000_CTRL_SPD_100;
-
- /* Write the configured values back to the Device Control Reg. */
- ew32(CTRL, ctrl);
- return E1000_SUCCESS;
-}
-
-/******************************************************************************
- * Forces the MAC's flow control settings.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Sets the TFCE and RFCE bits in the device control register to reflect
- * the adapter settings. TFCE and RFCE need to be explicitly set by
- * software when a Copper PHY is used because autonegotiation is managed
- * by the PHY rather than the MAC. Software must also configure these
- * bits when link is forced on a fiber connection.
- *****************************************************************************/
-s32 e1000_force_mac_fc(struct e1000_hw *hw)
-{
- u32 ctrl;
-
- DEBUGFUNC("e1000_force_mac_fc");
-
- /* Get the current configuration of the Device Control Register */
- ctrl = er32(CTRL);
-
- /* Because we didn't get link via the internal auto-negotiation
- * mechanism (we either forced link or we got link via PHY
- * auto-neg), we have to manually enable/disable transmit an
- * receive flow control.
- *
- * The "Case" statement below enables/disable flow control
- * according to the "hw->fc" parameter.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause
- * frames but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * frames but we do not receive pause frames).
- * 3: Both Rx and TX flow control (symmetric) is enabled.
- * other: No other values should be possible at this point.
- */
-
- switch (hw->fc) {
- case E1000_FC_NONE:
- ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
- break;
- case E1000_FC_RX_PAUSE:
- ctrl &= (~E1000_CTRL_TFCE);
- ctrl |= E1000_CTRL_RFCE;
- break;
- case E1000_FC_TX_PAUSE:
- ctrl &= (~E1000_CTRL_RFCE);
- ctrl |= E1000_CTRL_TFCE;
- break;
- case E1000_FC_FULL:
- ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
- break;
- default:
- DEBUGOUT("Flow control param set incorrectly\n");
- return -E1000_ERR_CONFIG;
- }
-
- /* Disable TX Flow Control for 82542 (rev 2.0) */
- if (hw->mac_type == e1000_82542_rev2_0)
- ctrl &= (~E1000_CTRL_TFCE);
-
- ew32(CTRL, ctrl);
- return E1000_SUCCESS;
-}
-
-/******************************************************************************
- * Configures flow control settings after link is established
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Should be called immediately after a valid link has been established.
- * Forces MAC flow control settings if link was forced. When in MII/GMII mode
- * and autonegotiation is enabled, the MAC flow control settings will be set
- * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
- * and RFCE bits will be automaticaly set to the negotiated flow control mode.
- *****************************************************************************/
-static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 mii_status_reg;
- u16 mii_nway_adv_reg;
- u16 mii_nway_lp_ability_reg;
- u16 speed;
- u16 duplex;
-
- DEBUGFUNC("e1000_config_fc_after_link_up");
-
- /* Check for the case where we have fiber media and auto-neg failed
- * so we had to force link. In this case, we need to force the
- * configuration of the MAC to match the "fc" parameter.
- */
- if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed)) ||
- ((hw->media_type == e1000_media_type_internal_serdes) &&
- (hw->autoneg_failed)) ||
- ((hw->media_type == e1000_media_type_copper) && (!hw->autoneg))) {
- ret_val = e1000_force_mac_fc(hw);
- if (ret_val) {
- DEBUGOUT("Error forcing flow control settings\n");
- return ret_val;
- }
- }
-
- /* Check for the case where we have copper media and auto-neg is
- * enabled. In this case, we need to check and see if Auto-Neg
- * has completed, and if so, how the PHY and link partner has
- * flow control configured.
- */
- if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
- /* Read the MII Status Register and check to see if AutoNeg
- * has completed. We read this twice because this reg has
- * some "sticky" (latched) bits.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
- /* The AutoNeg process has completed, so we now need to
- * read both the Auto Negotiation Advertisement Register
- * (Address 4) and the Auto_Negotiation Base Page Ability
- * Register (Address 5) to determine how flow control was
- * negotiated.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
- &mii_nway_adv_reg);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
- &mii_nway_lp_ability_reg);
- if (ret_val)
- return ret_val;
-
- /* Two bits in the Auto Negotiation Advertisement Register
- * (Address 4) and two bits in the Auto Negotiation Base
- * Page Ability Register (Address 5) determine flow control
- * for both the PHY and the link partner. The following
- * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
- * 1999, describes these PAUSE resolution bits and how flow
- * control is determined based upon these settings.
- * NOTE: DC = Don't Care
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
- *-------|---------|-------|---------|--------------------
- * 0 | 0 | DC | DC | E1000_FC_NONE
- * 0 | 1 | 0 | DC | E1000_FC_NONE
- * 0 | 1 | 1 | 0 | E1000_FC_NONE
- * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
- * 1 | 0 | 0 | DC | E1000_FC_NONE
- * 1 | DC | 1 | DC | E1000_FC_FULL
- * 1 | 1 | 0 | 0 | E1000_FC_NONE
- * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
- *
- */
- /* Are both PAUSE bits set to 1? If so, this implies
- * Symmetric Flow Control is enabled at both ends. The
- * ASM_DIR bits are irrelevant per the spec.
- *
- * For Symmetric Flow Control:
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 1 | DC | 1 | DC | E1000_FC_FULL
- *
- */
- if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
- /* Now we need to check if the user selected RX ONLY
- * of pause frames. In this case, we had to advertise
- * FULL flow control because we could not advertise RX
- * ONLY. Hence, we must now check to see if we need to
- * turn OFF the TRANSMISSION of PAUSE frames.
- */
- if (hw->original_fc == E1000_FC_FULL) {
- hw->fc = E1000_FC_FULL;
- DEBUGOUT("Flow Control = FULL.\n");
- } else {
- hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
- }
- }
- /* For receiving PAUSE frames ONLY.
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
- *
- */
- else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- hw->fc = E1000_FC_TX_PAUSE;
- DEBUGOUT("Flow Control = TX PAUSE frames only.\n");
- }
- /* For transmitting PAUSE frames ONLY.
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
- *
- */
- else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
- }
- /* Per the IEEE spec, at this point flow control should be
- * disabled. However, we want to consider that we could
- * be connected to a legacy switch that doesn't advertise
- * desired flow control, but can be forced on the link
- * partner. So if we advertised no flow control, that is
- * what we will resolve to. If we advertised some kind of
- * receive capability (Rx Pause Only or Full Flow Control)
- * and the link partner advertised none, we will configure
- * ourselves to enable Rx Flow Control only. We can do
- * this safely for two reasons: If the link partner really
- * didn't want flow control enabled, and we enable Rx, no
- * harm done since we won't be receiving any PAUSE frames
- * anyway. If the intent on the link partner was to have
- * flow control enabled, then by us enabling RX only, we
- * can at least receive pause frames and process them.
- * This is a good idea because in most cases, since we are
- * predominantly a server NIC, more times than not we will
- * be asked to delay transmission of packets than asking
- * our link partner to pause transmission of frames.
- */
- else if ((hw->original_fc == E1000_FC_NONE ||
- hw->original_fc == E1000_FC_TX_PAUSE) ||
- hw->fc_strict_ieee) {
- hw->fc = E1000_FC_NONE;
- DEBUGOUT("Flow Control = NONE.\n");
- } else {
- hw->fc = E1000_FC_RX_PAUSE;
- DEBUGOUT("Flow Control = RX PAUSE frames only.\n");
- }
-
- /* Now we need to do one last check... If we auto-
- * negotiated to HALF DUPLEX, flow control should not be
- * enabled per IEEE 802.3 spec.
- */
- ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
- if (ret_val) {
- DEBUGOUT("Error getting link speed and duplex\n");
- return ret_val;
- }
-
- if (duplex == HALF_DUPLEX)
- hw->fc = E1000_FC_NONE;
-
- /* Now we call a subroutine to actually force the MAC
- * controller to use the correct flow control settings.
- */
- ret_val = e1000_force_mac_fc(hw);
- if (ret_val) {
- DEBUGOUT("Error forcing flow control settings\n");
- return ret_val;
- }
- } else {
- DEBUGOUT("Copper PHY and Auto Neg has not completed.\n");
- }
- }
- return E1000_SUCCESS;
-}
-
-/******************************************************************************
- * Checks to see if the link status of the hardware has changed.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Called by any function that needs to check the link status of the adapter.
- *****************************************************************************/
-s32 e1000_check_for_link(struct e1000_hw *hw)
-{
- u32 rxcw = 0;
- u32 ctrl;
- u32 status;
- u32 rctl;
- u32 icr;
- u32 signal = 0;
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_check_for_link");
-
- ctrl = er32(CTRL);
- status = er32(STATUS);
-
- /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be
- * set when the optics detect a signal. On older adapters, it will be
- * cleared when there is a signal. This applies to fiber media only.
- */
- if ((hw->media_type == e1000_media_type_fiber) ||
- (hw->media_type == e1000_media_type_internal_serdes)) {
- rxcw = er32(RXCW);
-
- if (hw->media_type == e1000_media_type_fiber) {
- signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
- if (status & E1000_STATUS_LU)
- hw->get_link_status = false;
- }
- }
-
- /* If we have a copper PHY then we only want to go out to the PHY
- * registers to see if Auto-Neg has completed and/or if our link
- * status has changed. The get_link_status flag will be set if we
- * receive a Link Status Change interrupt or we have Rx Sequence
- * Errors.
- */
- if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
- /* First we want to see if the MII Status Register reports
- * link. If so, then we want to get the current speed/duplex
- * of the PHY.
- * Read the register twice since the link bit is sticky.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (phy_data & MII_SR_LINK_STATUS) {
- hw->get_link_status = false;
- /* Check if there was DownShift, must be checked immediately after
- * link-up */
- e1000_check_downshift(hw);
-
- /* If we are on 82544 or 82543 silicon and speed/duplex
- * are forced to 10H or 10F, then we will implement the polarity
- * reversal workaround. We disable interrupts first, and upon
- * returning, place the devices interrupt state to its previous
- * value except for the link status change interrupt which will
- * happen due to the execution of this workaround.
- */
-
- if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543) &&
- (!hw->autoneg) &&
- (hw->forced_speed_duplex == e1000_10_full ||
- hw->forced_speed_duplex == e1000_10_half)) {
- ew32(IMC, 0xffffffff);
- ret_val = e1000_polarity_reversal_workaround(hw);
- icr = er32(ICR);
- ew32(ICS, (icr & ~E1000_ICS_LSC));
- ew32(IMS, IMS_ENABLE_MASK);
- }
-
- } else {
- /* No link detected */
- e1000_config_dsp_after_link_change(hw, false);
- return 0;
- }
-
- /* If we are forcing speed/duplex, then we simply return since
- * we have already determined whether we have link or not.
- */
- if (!hw->autoneg) return -E1000_ERR_CONFIG;
-
- /* optimize the dsp settings for the igp phy */
- e1000_config_dsp_after_link_change(hw, true);
-
- /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
- * have Si on board that is 82544 or newer, Auto
- * Speed Detection takes care of MAC speed/duplex
- * configuration. So we only need to configure Collision
- * Distance in the MAC. Otherwise, we need to force
- * speed/duplex on the MAC to the current PHY speed/duplex
- * settings.
- */
- if (hw->mac_type >= e1000_82544)
- e1000_config_collision_dist(hw);
- else {
- ret_val = e1000_config_mac_to_phy(hw);
- if (ret_val) {
- DEBUGOUT("Error configuring MAC to PHY settings\n");
- return ret_val;
- }
- }
-
- /* Configure Flow Control now that Auto-Neg has completed. First, we
- * need to restore the desired flow control settings because we may
- * have had to re-autoneg with a different link partner.
- */
- ret_val = e1000_config_fc_after_link_up(hw);
- if (ret_val) {
- DEBUGOUT("Error configuring flow control\n");
- return ret_val;
- }
-
- /* At this point we know that we are on copper and we have
- * auto-negotiated link. These are conditions for checking the link
- * partner capability register. We use the link speed to determine if
- * TBI compatibility needs to be turned on or off. If the link is not
- * at gigabit speed, then TBI compatibility is not needed. If we are
- * at gigabit speed, we turn on TBI compatibility.
- */
- if (hw->tbi_compatibility_en) {
- u16 speed, duplex;
- ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
- if (ret_val) {
- DEBUGOUT("Error getting link speed and duplex\n");
- return ret_val;
- }
- if (speed != SPEED_1000) {
- /* If link speed is not set to gigabit speed, we do not need
- * to enable TBI compatibility.
- */
- if (hw->tbi_compatibility_on) {
- /* If we previously were in the mode, turn it off. */
- rctl = er32(RCTL);
- rctl &= ~E1000_RCTL_SBP;
- ew32(RCTL, rctl);
- hw->tbi_compatibility_on = false;
- }
- } else {
- /* If TBI compatibility is was previously off, turn it on. For
- * compatibility with a TBI link partner, we will store bad
- * packets. Some frames have an additional byte on the end and
- * will look like CRC errors to the hardware.
- */
- if (!hw->tbi_compatibility_on) {
- hw->tbi_compatibility_on = true;
- rctl = er32(RCTL);
- rctl |= E1000_RCTL_SBP;
- ew32(RCTL, rctl);
- }
- }
- }
- }
- /* If we don't have link (auto-negotiation failed or link partner cannot
- * auto-negotiate), the cable is plugged in (we have signal), and our
- * link partner is not trying to auto-negotiate with us (we are receiving
- * idles or data), we need to force link up. We also need to give
- * auto-negotiation time to complete, in case the cable was just plugged
- * in. The autoneg_failed flag does this.
- */
- else if ((((hw->media_type == e1000_media_type_fiber) &&
- ((ctrl & E1000_CTRL_SWDPIN1) == signal)) ||
- (hw->media_type == e1000_media_type_internal_serdes)) &&
- (!(status & E1000_STATUS_LU)) &&
- (!(rxcw & E1000_RXCW_C))) {
- if (hw->autoneg_failed == 0) {
- hw->autoneg_failed = 1;
- return 0;
- }
- DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
-
- /* Disable auto-negotiation in the TXCW register */
- ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
-
- /* Force link-up and also force full-duplex. */
- ctrl = er32(CTRL);
- ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
- ew32(CTRL, ctrl);
-
- /* Configure Flow Control after forcing link up. */
- ret_val = e1000_config_fc_after_link_up(hw);
- if (ret_val) {
- DEBUGOUT("Error configuring flow control\n");
- return ret_val;
- }
- }
- /* If we are forcing link and we are receiving /C/ ordered sets, re-enable
- * auto-negotiation in the TXCW register and disable forced link in the
- * Device Control register in an attempt to auto-negotiate with our link
- * partner.
- */
- else if (((hw->media_type == e1000_media_type_fiber) ||
- (hw->media_type == e1000_media_type_internal_serdes)) &&
- (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
- DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
- ew32(TXCW, hw->txcw);
- ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
-
- hw->serdes_link_down = false;
- }
- /* If we force link for non-auto-negotiation switch, check link status
- * based on MAC synchronization for internal serdes media type.
- */
- else if ((hw->media_type == e1000_media_type_internal_serdes) &&
- !(E1000_TXCW_ANE & er32(TXCW))) {
- /* SYNCH bit and IV bit are sticky. */
- udelay(10);
- if (E1000_RXCW_SYNCH & er32(RXCW)) {
- if (!(rxcw & E1000_RXCW_IV)) {
- hw->serdes_link_down = false;
- DEBUGOUT("SERDES: Link is up.\n");
- }
- } else {
- hw->serdes_link_down = true;
- DEBUGOUT("SERDES: Link is down.\n");
- }
- }
- if ((hw->media_type == e1000_media_type_internal_serdes) &&
- (E1000_TXCW_ANE & er32(TXCW))) {
- hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS));
- }
- return E1000_SUCCESS;
-}
-
-/******************************************************************************
- * Detects the current speed and duplex settings of the hardware.
+/**
+ * e1000_copper_link_preconfig - early configuration for copper
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- * speed - Speed of the connection
- * duplex - Duplex setting of the connection
- *****************************************************************************/
-s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+ * Make sure we have a valid PHY and change PHY mode before link setup.
+ */
+static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
{
- u32 status;
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_get_speed_and_duplex");
-
- if (hw->mac_type >= e1000_82543) {
- status = er32(STATUS);
- if (status & E1000_STATUS_SPEED_1000) {
- *speed = SPEED_1000;
- DEBUGOUT("1000 Mbs, ");
- } else if (status & E1000_STATUS_SPEED_100) {
- *speed = SPEED_100;
- DEBUGOUT("100 Mbs, ");
- } else {
- *speed = SPEED_10;
- DEBUGOUT("10 Mbs, ");
- }
-
- if (status & E1000_STATUS_FD) {
- *duplex = FULL_DUPLEX;
- DEBUGOUT("Full Duplex\n");
- } else {
- *duplex = HALF_DUPLEX;
- DEBUGOUT(" Half Duplex\n");
- }
- } else {
- DEBUGOUT("1000 Mbs, Full Duplex\n");
- *speed = SPEED_1000;
- *duplex = FULL_DUPLEX;
- }
-
- /* IGP01 PHY may advertise full duplex operation after speed downgrade even
- * if it is operating at half duplex. Here we set the duplex settings to
- * match the duplex in the link partner's capabilities.
- */
- if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
- ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
- *duplex = HALF_DUPLEX;
- else {
- ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
- if (ret_val)
- return ret_val;
- if ((*speed == SPEED_100 && !(phy_data & NWAY_LPAR_100TX_FD_CAPS)) ||
- (*speed == SPEED_10 && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
- *duplex = HALF_DUPLEX;
- }
- }
-
- if ((hw->mac_type == e1000_80003es2lan) &&
- (hw->media_type == e1000_media_type_copper)) {
- if (*speed == SPEED_1000)
- ret_val = e1000_configure_kmrn_for_1000(hw);
- else
- ret_val = e1000_configure_kmrn_for_10_100(hw, *duplex);
- if (ret_val)
- return ret_val;
- }
-
- if ((hw->phy_type == e1000_phy_igp_3) && (*speed == SPEED_1000)) {
- ret_val = e1000_kumeran_lock_loss_workaround(hw);
- if (ret_val)
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
-/******************************************************************************
-* Blocks until autoneg completes or times out (~4.5 seconds)
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_wait_autoneg(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 i;
- u16 phy_data;
-
- DEBUGFUNC("e1000_wait_autoneg");
- DEBUGOUT("Waiting for Auto-Neg to complete.\n");
-
- /* We will wait for autoneg to complete or 4.5 seconds to expire. */
- for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
- /* Read the MII Status Register and wait for Auto-Neg
- * Complete bit to be set.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
- if (phy_data & MII_SR_AUTONEG_COMPLETE) {
- return E1000_SUCCESS;
- }
- msleep(100);
- }
- return E1000_SUCCESS;
-}
+ DEBUGFUNC("e1000_copper_link_preconfig");
-/******************************************************************************
-* Raises the Management Data Clock
-*
-* hw - Struct containing variables accessed by shared code
-* ctrl - Device control register's current value
-******************************************************************************/
-static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
-{
- /* Raise the clock input to the Management Data Clock (by setting the MDC
- * bit), and then delay 10 microseconds.
- */
- ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
- E1000_WRITE_FLUSH();
- udelay(10);
-}
+ ctrl = er32(CTRL);
+ /* With 82543, we need to force speed and duplex on the MAC equal to what
+ * the PHY speed and duplex configuration is. In addition, we need to
+ * perform a hardware reset on the PHY to take it out of reset.
+ */
+ if (hw->mac_type > e1000_82543) {
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+ } else {
+ ctrl |=
+ (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
+ ew32(CTRL, ctrl);
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ }
-/******************************************************************************
-* Lowers the Management Data Clock
-*
-* hw - Struct containing variables accessed by shared code
-* ctrl - Device control register's current value
-******************************************************************************/
-static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
-{
- /* Lower the clock input to the Management Data Clock (by clearing the MDC
- * bit), and then delay 10 microseconds.
- */
- ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
- E1000_WRITE_FLUSH();
- udelay(10);
-}
+ /* Make sure we have a valid PHY */
+ ret_val = e1000_detect_gig_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error, did not detect valid phy.\n");
+ return ret_val;
+ }
+ DEBUGOUT1("Phy ID = %x \n", hw->phy_id);
+
+ /* Set PHY to class A mode (if necessary) */
+ ret_val = e1000_set_phy_mode(hw);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82545_rev_3) ||
+ (hw->mac_type == e1000_82546_rev_3)) {
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ phy_data |= 0x00000008;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ }
-/******************************************************************************
-* Shifts data bits out to the PHY
-*
-* hw - Struct containing variables accessed by shared code
-* data - Data to send out to the PHY
-* count - Number of bits to shift out
-*
-* Bits are shifted out in MSB to LSB order.
-******************************************************************************/
-static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
-{
- u32 ctrl;
- u32 mask;
-
- /* We need to shift "count" number of bits out to the PHY. So, the value
- * in the "data" parameter will be shifted out to the PHY one bit at a
- * time. In order to do this, "data" must be broken down into bits.
- */
- mask = 0x01;
- mask <<= (count - 1);
-
- ctrl = er32(CTRL);
-
- /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
- ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
-
- while (mask) {
- /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
- * then raising and lowering the Management Data Clock. A "0" is
- * shifted out to the PHY by setting the MDIO bit to "0" and then
- * raising and lowering the clock.
- */
- if (data & mask)
- ctrl |= E1000_CTRL_MDIO;
- else
- ctrl &= ~E1000_CTRL_MDIO;
-
- ew32(CTRL, ctrl);
- E1000_WRITE_FLUSH();
-
- udelay(10);
-
- e1000_raise_mdi_clk(hw, &ctrl);
- e1000_lower_mdi_clk(hw, &ctrl);
-
- mask = mask >> 1;
- }
-}
+ if (hw->mac_type <= e1000_82543 ||
+ hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82541_rev_2
+ || hw->mac_type == e1000_82547_rev_2)
+ hw->phy_reset_disable = false;
-/******************************************************************************
-* Shifts data bits in from the PHY
-*
-* hw - Struct containing variables accessed by shared code
-*
-* Bits are shifted in in MSB to LSB order.
-******************************************************************************/
-static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
-{
- u32 ctrl;
- u16 data = 0;
- u8 i;
-
- /* In order to read a register from the PHY, we need to shift in a total
- * of 18 bits from the PHY. The first two bit (turnaround) times are used
- * to avoid contention on the MDIO pin when a read operation is performed.
- * These two bits are ignored by us and thrown away. Bits are "shifted in"
- * by raising the input to the Management Data Clock (setting the MDC bit),
- * and then reading the value of the MDIO bit.
- */
- ctrl = er32(CTRL);
-
- /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
- ctrl &= ~E1000_CTRL_MDIO_DIR;
- ctrl &= ~E1000_CTRL_MDIO;
-
- ew32(CTRL, ctrl);
- E1000_WRITE_FLUSH();
-
- /* Raise and Lower the clock before reading in the data. This accounts for
- * the turnaround bits. The first clock occurred when we clocked out the
- * last bit of the Register Address.
- */
- e1000_raise_mdi_clk(hw, &ctrl);
- e1000_lower_mdi_clk(hw, &ctrl);
-
- for (data = 0, i = 0; i < 16; i++) {
- data = data << 1;
- e1000_raise_mdi_clk(hw, &ctrl);
- ctrl = er32(CTRL);
- /* Check to see if we shifted in a "1". */
- if (ctrl & E1000_CTRL_MDIO)
- data |= 1;
- e1000_lower_mdi_clk(hw, &ctrl);
- }
-
- e1000_raise_mdi_clk(hw, &ctrl);
- e1000_lower_mdi_clk(hw, &ctrl);
-
- return data;
+ return E1000_SUCCESS;
}
-static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask)
+/**
+ * e1000_copper_link_igp_setup - Copper link setup for e1000_phy_igp series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
{
- u32 swfw_sync = 0;
- u32 swmask = mask;
- u32 fwmask = mask << 16;
- s32 timeout = 200;
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 phy_data;
- DEBUGFUNC("e1000_swfw_sync_acquire");
+ DEBUGFUNC("e1000_copper_link_igp_setup");
- if (hw->swfwhw_semaphore_present)
- return e1000_get_software_flag(hw);
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
- if (!hw->swfw_sync_present)
- return e1000_get_hw_eeprom_semaphore(hw);
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
- while (timeout) {
- if (e1000_get_hw_eeprom_semaphore(hw))
- return -E1000_ERR_SWFW_SYNC;
+ /* Wait 15ms for MAC to configure PHY from eeprom settings */
+ msleep(15);
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+
+ /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+ if (hw->phy_type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ ret_val = e1000_set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ DEBUGOUT("Error Disabling LPLU D3\n");
+ return ret_val;
+ }
+ }
- swfw_sync = er32(SW_FW_SYNC);
- if (!(swfw_sync & (fwmask | swmask))) {
- break;
- }
+ /* Configure mdi-mdix settings */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ hw->dsp_config_state = e1000_dsp_config_disabled;
+ /* Force MDI for earlier revs of the IGP PHY */
+ phy_data &=
+ ~(IGP01E1000_PSCR_AUTO_MDIX |
+ IGP01E1000_PSCR_FORCE_MDI_MDIX);
+ hw->mdix = 1;
+
+ } else {
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ }
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* set auto-master slave resolution settings */
+ if (hw->autoneg) {
+ e1000_ms_type phy_ms_setting = hw->master_slave;
+
+ if (hw->ffe_config_state == e1000_ffe_config_active)
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+
+ if (hw->dsp_config_state == e1000_dsp_config_activated)
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+
+ /* when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default. */
+ if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ /* Set auto Master/Slave resolution process */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ ret_val =
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
- /* firmware currently using resource (fwmask) */
- /* or other software thread currently using resource (swmask) */
- e1000_put_hw_eeprom_semaphore(hw);
- mdelay(5);
- timeout--;
- }
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
- if (!timeout) {
- DEBUGOUT("Driver can't access resource, SW_FW_SYNC timeout.\n");
- return -E1000_ERR_SWFW_SYNC;
- }
+ /* load defaults for future use */
+ hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) : e1000_ms_auto;
- swfw_sync |= swmask;
- ew32(SW_FW_SYNC, swfw_sync);
+ switch (phy_ms_setting) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
- e1000_put_hw_eeprom_semaphore(hw);
- return E1000_SUCCESS;
+ return E1000_SUCCESS;
}
-static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask)
+/**
+ * e1000_copper_link_mgp_setup - Copper link setup for e1000_phy_m88 series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
{
- u32 swfw_sync;
- u32 swmask = mask;
+ s32 ret_val;
+ u16 phy_data;
- DEBUGFUNC("e1000_swfw_sync_release");
+ DEBUGFUNC("e1000_copper_link_mgp_setup");
- if (hw->swfwhw_semaphore_present) {
- e1000_release_software_flag(hw);
- return;
- }
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
- if (!hw->swfw_sync_present) {
- e1000_put_hw_eeprom_semaphore(hw);
- return;
- }
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
- /* if (e1000_get_hw_eeprom_semaphore(hw))
- * return -E1000_ERR_SWFW_SYNC; */
- while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS);
- /* empty */
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
- swfw_sync = er32(SW_FW_SYNC);
- swfw_sync &= ~swmask;
- ew32(SW_FW_SYNC, swfw_sync);
-
- e1000_put_hw_eeprom_semaphore(hw);
-}
-
-/*****************************************************************************
-* Reads the value from a PHY register, if the value is on a specific non zero
-* page, sets the page first.
-* hw - Struct containing variables accessed by shared code
-* reg_addr - address of the PHY register to read
-******************************************************************************/
-s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
-{
- u32 ret_val;
- u16 swfw;
-
- DEBUGFUNC("e1000_read_phy_reg");
-
- if ((hw->mac_type == e1000_80003es2lan) &&
- (er32(STATUS) & E1000_STATUS_FUNC_1)) {
- swfw = E1000_SWFW_PHY1_SM;
- } else {
- swfw = E1000_SWFW_PHY0_SM;
- }
- if (e1000_swfw_sync_acquire(hw, swfw))
- return -E1000_ERR_SWFW_SYNC;
-
- if ((hw->phy_type == e1000_phy_igp ||
- hw->phy_type == e1000_phy_igp_3 ||
- hw->phy_type == e1000_phy_igp_2) &&
- (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
- ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (u16)reg_addr);
- if (ret_val) {
- e1000_swfw_sync_release(hw, swfw);
- return ret_val;
- }
- } else if (hw->phy_type == e1000_phy_gg82563) {
- if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
- (hw->mac_type == e1000_80003es2lan)) {
- /* Select Configuration Page */
- if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
- ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
- (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
- } else {
- /* Use Alternative Page Select register to access
- * registers 30 and 31
- */
- ret_val = e1000_write_phy_reg_ex(hw,
- GG82563_PHY_PAGE_SELECT_ALT,
- (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
- }
-
- if (ret_val) {
- e1000_swfw_sync_release(hw, swfw);
- return ret_val;
- }
- }
- }
-
- ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
- phy_data);
-
- e1000_swfw_sync_release(hw, swfw);
- return ret_val;
-}
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
- u16 *phy_data)
-{
- u32 i;
- u32 mdic = 0;
- const u32 phy_addr = 1;
-
- DEBUGFUNC("e1000_read_phy_reg_ex");
-
- if (reg_addr > MAX_PHY_REG_ADDRESS) {
- DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
- return -E1000_ERR_PARAM;
- }
-
- if (hw->mac_type > e1000_82543) {
- /* Set up Op-code, Phy Address, and register address in the MDI
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
- (phy_addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_READ));
-
- ew32(MDIC, mdic);
-
- /* Poll the ready bit to see if the MDI read completed */
- for (i = 0; i < 64; i++) {
- udelay(50);
- mdic = er32(MDIC);
- if (mdic & E1000_MDIC_READY) break;
- }
- if (!(mdic & E1000_MDIC_READY)) {
- DEBUGOUT("MDI Read did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (mdic & E1000_MDIC_ERROR) {
- DEBUGOUT("MDI Error\n");
- return -E1000_ERR_PHY;
- }
- *phy_data = (u16)mdic;
- } else {
- /* We must first send a preamble through the MDIO pin to signal the
- * beginning of an MII instruction. This is done by sending 32
- * consecutive "1" bits.
- */
- e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
-
- /* Now combine the next few fields that are required for a read
- * operation. We use this method instead of calling the
- * e1000_shift_out_mdi_bits routine five different times. The format of
- * a MII read instruction consists of a shift out of 14 bits and is
- * defined as follows:
- * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
- * followed by a shift in of 18 bits. This first two bits shifted in
- * are TurnAround bits used to avoid contention on the MDIO pin when a
- * READ operation is performed. These two bits are thrown away
- * followed by a shift in of 16 bits which contains the desired data.
- */
- mdic = ((reg_addr) | (phy_addr << 5) |
- (PHY_OP_READ << 10) | (PHY_SOF << 12));
-
- e1000_shift_out_mdi_bits(hw, mdic, 14);
-
- /* Now that we've shifted out the read command to the MII, we need to
- * "shift in" the 16-bit value (18 total bits) of the requested PHY
- * register address.
- */
- *phy_data = e1000_shift_in_mdi_bits(hw);
- }
- return E1000_SUCCESS;
-}
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
-/******************************************************************************
-* Writes a value to a PHY register
-*
-* hw - Struct containing variables accessed by shared code
-* reg_addr - address of the PHY register to write
-* data - data to write to the PHY
-******************************************************************************/
-s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
-{
- u32 ret_val;
- u16 swfw;
-
- DEBUGFUNC("e1000_write_phy_reg");
-
- if ((hw->mac_type == e1000_80003es2lan) &&
- (er32(STATUS) & E1000_STATUS_FUNC_1)) {
- swfw = E1000_SWFW_PHY1_SM;
- } else {
- swfw = E1000_SWFW_PHY0_SM;
- }
- if (e1000_swfw_sync_acquire(hw, swfw))
- return -E1000_ERR_SWFW_SYNC;
-
- if ((hw->phy_type == e1000_phy_igp ||
- hw->phy_type == e1000_phy_igp_3 ||
- hw->phy_type == e1000_phy_igp_2) &&
- (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
- ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (u16)reg_addr);
- if (ret_val) {
- e1000_swfw_sync_release(hw, swfw);
- return ret_val;
- }
- } else if (hw->phy_type == e1000_phy_gg82563) {
- if (((reg_addr & MAX_PHY_REG_ADDRESS) > MAX_PHY_MULTI_PAGE_REG) ||
- (hw->mac_type == e1000_80003es2lan)) {
- /* Select Configuration Page */
- if ((reg_addr & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
- ret_val = e1000_write_phy_reg_ex(hw, GG82563_PHY_PAGE_SELECT,
- (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
- } else {
- /* Use Alternative Page Select register to access
- * registers 30 and 31
- */
- ret_val = e1000_write_phy_reg_ex(hw,
- GG82563_PHY_PAGE_SELECT_ALT,
- (u16)((u16)reg_addr >> GG82563_PAGE_SHIFT));
- }
-
- if (ret_val) {
- e1000_swfw_sync_release(hw, swfw);
- return ret_val;
- }
- }
- }
-
- ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
- phy_data);
-
- e1000_swfw_sync_release(hw, swfw);
- return ret_val;
-}
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_revision < M88E1011_I_REV_4) {
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((hw->phy_revision == E1000_REVISION_2) &&
+ (hw->phy_id == M88E1111_I_PHY_ID)) {
+ /* Vidalia Phy, set the downshift counter to 5x */
+ phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
-static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
- u16 phy_data)
-{
- u32 i;
- u32 mdic = 0;
- const u32 phy_addr = 1;
-
- DEBUGFUNC("e1000_write_phy_reg_ex");
-
- if (reg_addr > MAX_PHY_REG_ADDRESS) {
- DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
- return -E1000_ERR_PARAM;
- }
-
- if (hw->mac_type > e1000_82543) {
- /* Set up Op-code, Phy Address, register address, and data intended
- * for the PHY register in the MDI Control register. The MAC will take
- * care of interfacing with the PHY to send the desired data.
- */
- mdic = (((u32)phy_data) |
- (reg_addr << E1000_MDIC_REG_SHIFT) |
- (phy_addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_WRITE));
-
- ew32(MDIC, mdic);
-
- /* Poll the ready bit to see if the MDI read completed */
- for (i = 0; i < 641; i++) {
- udelay(5);
- mdic = er32(MDIC);
- if (mdic & E1000_MDIC_READY) break;
- }
- if (!(mdic & E1000_MDIC_READY)) {
- DEBUGOUT("MDI Write did not complete\n");
- return -E1000_ERR_PHY;
- }
- } else {
- /* We'll need to use the SW defined pins to shift the write command
- * out to the PHY. We first send a preamble to the PHY to signal the
- * beginning of the MII instruction. This is done by sending 32
- * consecutive "1" bits.
- */
- e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
-
- /* Now combine the remaining required fields that will indicate a
- * write operation. We use this method instead of calling the
- * e1000_shift_out_mdi_bits routine for each field in the command. The
- * format of a MII write instruction is as follows:
- * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
- */
- mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
- (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
- mdic <<= 16;
- mdic |= (u32)phy_data;
-
- e1000_shift_out_mdi_bits(hw, mdic, 32);
- }
-
- return E1000_SUCCESS;
-}
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting the PHY\n");
+ return ret_val;
+ }
-static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data)
-{
- u32 reg_val;
- u16 swfw;
- DEBUGFUNC("e1000_read_kmrn_reg");
-
- if ((hw->mac_type == e1000_80003es2lan) &&
- (er32(STATUS) & E1000_STATUS_FUNC_1)) {
- swfw = E1000_SWFW_PHY1_SM;
- } else {
- swfw = E1000_SWFW_PHY0_SM;
- }
- if (e1000_swfw_sync_acquire(hw, swfw))
- return -E1000_ERR_SWFW_SYNC;
-
- /* Write register address */
- reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
- E1000_KUMCTRLSTA_OFFSET) |
- E1000_KUMCTRLSTA_REN;
- ew32(KUMCTRLSTA, reg_val);
- udelay(2);
-
- /* Read the data returned */
- reg_val = er32(KUMCTRLSTA);
- *data = (u16)reg_val;
-
- e1000_swfw_sync_release(hw, swfw);
- return E1000_SUCCESS;
+ return E1000_SUCCESS;
}
-static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data)
+/**
+ * e1000_copper_link_autoneg - setup auto-neg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Setup auto-negotiation and flow control advertisements,
+ * and then perform auto-negotiation.
+ */
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
{
- u32 reg_val;
- u16 swfw;
- DEBUGFUNC("e1000_write_kmrn_reg");
-
- if ((hw->mac_type == e1000_80003es2lan) &&
- (er32(STATUS) & E1000_STATUS_FUNC_1)) {
- swfw = E1000_SWFW_PHY1_SM;
- } else {
- swfw = E1000_SWFW_PHY0_SM;
- }
- if (e1000_swfw_sync_acquire(hw, swfw))
- return -E1000_ERR_SWFW_SYNC;
-
- reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) &
- E1000_KUMCTRLSTA_OFFSET) | data;
- ew32(KUMCTRLSTA, reg_val);
- udelay(2);
-
- e1000_swfw_sync_release(hw, swfw);
- return E1000_SUCCESS;
-}
+ s32 ret_val;
+ u16 phy_data;
-/******************************************************************************
-* Returns the PHY to the power-on reset state
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-s32 e1000_phy_hw_reset(struct e1000_hw *hw)
-{
- u32 ctrl, ctrl_ext;
- u32 led_ctrl;
- s32 ret_val;
- u16 swfw;
-
- DEBUGFUNC("e1000_phy_hw_reset");
-
- /* In the case of the phy reset being blocked, it's not an error, we
- * simply return success without performing the reset. */
- ret_val = e1000_check_phy_reset_block(hw);
- if (ret_val)
- return E1000_SUCCESS;
-
- DEBUGOUT("Resetting Phy...\n");
-
- if (hw->mac_type > e1000_82543) {
- if ((hw->mac_type == e1000_80003es2lan) &&
- (er32(STATUS) & E1000_STATUS_FUNC_1)) {
- swfw = E1000_SWFW_PHY1_SM;
- } else {
- swfw = E1000_SWFW_PHY0_SM;
- }
- if (e1000_swfw_sync_acquire(hw, swfw)) {
- DEBUGOUT("Unable to acquire swfw sync\n");
- return -E1000_ERR_SWFW_SYNC;
- }
- /* Read the device control register and assert the E1000_CTRL_PHY_RST
- * bit. Then, take it out of reset.
- * For pre-e1000_82571 hardware, we delay for 10ms between the assert
- * and deassert. For e1000_82571 hardware and later, we instead delay
- * for 50us between and 10ms after the deassertion.
- */
- ctrl = er32(CTRL);
- ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
- E1000_WRITE_FLUSH();
-
- if (hw->mac_type < e1000_82571)
- msleep(10);
- else
- udelay(100);
-
- ew32(CTRL, ctrl);
- E1000_WRITE_FLUSH();
-
- if (hw->mac_type >= e1000_82571)
- mdelay(10);
-
- e1000_swfw_sync_release(hw, swfw);
- } else {
- /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
- * bit to put the PHY into reset. Then, take it out of reset.
- */
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
- ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
- ew32(CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH();
- msleep(10);
- ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
- ew32(CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH();
- }
- udelay(150);
-
- if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- /* Configure activity LED after PHY reset */
- led_ctrl = er32(LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- ew32(LEDCTL, led_ctrl);
- }
-
- /* Wait for FW to finish PHY configuration. */
- ret_val = e1000_get_phy_cfg_done(hw);
- if (ret_val != E1000_SUCCESS)
- return ret_val;
- e1000_release_software_semaphore(hw);
-
- if ((hw->mac_type == e1000_ich8lan) && (hw->phy_type == e1000_phy_igp_3))
- ret_val = e1000_init_lcd_from_nvm(hw);
-
- return ret_val;
-}
+ DEBUGFUNC("e1000_copper_link_autoneg");
-/******************************************************************************
-* Resets the PHY
-*
-* hw - Struct containing variables accessed by shared code
-*
-* Sets bit 15 of the MII Control register
-******************************************************************************/
-s32 e1000_phy_reset(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_phy_reset");
-
- /* In the case of the phy reset being blocked, it's not an error, we
- * simply return success without performing the reset. */
- ret_val = e1000_check_phy_reset_block(hw);
- if (ret_val)
- return E1000_SUCCESS;
-
- switch (hw->phy_type) {
- case e1000_phy_igp:
- case e1000_phy_igp_2:
- case e1000_phy_igp_3:
- case e1000_phy_ife:
- ret_val = e1000_phy_hw_reset(hw);
- if (ret_val)
- return ret_val;
- break;
- default:
- ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= MII_CR_RESET;
- ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- udelay(1);
- break;
- }
-
- if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2)
- e1000_phy_init_script(hw);
-
- return E1000_SUCCESS;
-}
+ /* Perform some bounds checking on the hw->autoneg_advertised
+ * parameter. If this variable is zero, then set it to the default.
+ */
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
-/******************************************************************************
-* Work-around for 82566 power-down: on D3 entry-
-* 1) disable gigabit link
-* 2) write VR power-down enable
-* 3) read it back
-* if successful continue, else issue LCD reset and repeat
-*
-* hw - struct containing variables accessed by shared code
-******************************************************************************/
-void e1000_phy_powerdown_workaround(struct e1000_hw *hw)
-{
- s32 reg;
- u16 phy_data;
- s32 retry = 0;
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (hw->autoneg_advertised == 0)
+ hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ DEBUGOUT("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ DEBUGOUT("Restarting Auto-Neg\n");
- DEBUGFUNC("e1000_phy_powerdown_workaround");
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
- if (hw->phy_type != e1000_phy_igp_3)
- return;
+ phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
- do {
- /* Disable link */
- reg = er32(PHY_CTRL);
- ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
- E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (hw->wait_autoneg_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error while waiting for autoneg to complete\n");
+ return ret_val;
+ }
+ }
- /* Write VR power-down enable - bits 9:8 should be 10b */
- e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
- phy_data |= (1 << 9);
- phy_data &= ~(1 << 8);
- e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data);
+ hw->get_link_status = true;
- /* Read it back and test */
- e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data);
- if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry)
- break;
+ return E1000_SUCCESS;
+}
- /* Issue PHY reset and repeat at most one more time */
- reg = er32(CTRL);
- ew32(CTRL, reg | E1000_CTRL_PHY_RST);
- retry++;
- } while (retry);
+/**
+ * e1000_copper_link_postconfig - post link setup
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Config the MAC and the PHY after link is up.
+ * 1) Set up the MAC to the current PHY speed/duplex
+ * if we are on 82543. If we
+ * are on newer silicon, we only need to configure
+ * collision distance in the Transmit Control Register.
+ * 2) Set up flow control on the MAC to that established with
+ * the link partner.
+ * 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+ */
+static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ DEBUGFUNC("e1000_copper_link_postconfig");
- return;
+ if (hw->mac_type >= e1000_82544) {
+ e1000_config_collision_dist(hw);
+ } else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring Flow Control\n");
+ return ret_val;
+ }
-}
+ /* Config DSP to improve Giga link quality */
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_config_dsp_after_link_change(hw, true);
+ if (ret_val) {
+ DEBUGOUT("Error Configuring DSP after link up\n");
+ return ret_val;
+ }
+ }
-/******************************************************************************
-* Work-around for 82566 Kumeran PCS lock loss:
-* On link status change (i.e. PCI reset, speed change) and link is up and
-* speed is gigabit-
-* 0) if workaround is optionally disabled do nothing
-* 1) wait 1ms for Kumeran link to come up
-* 2) check Kumeran Diagnostic register PCS lock loss bit
-* 3) if not set the link is locked (all is good), otherwise...
-* 4) reset the PHY
-* 5) repeat up to 10 times
-* Note: this is only called for IGP3 copper when speed is 1gb.
-*
-* hw - struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw)
-{
- s32 ret_val;
- s32 reg;
- s32 cnt;
- u16 phy_data;
-
- if (hw->kmrn_lock_loss_workaround_disabled)
- return E1000_SUCCESS;
-
- /* Make sure link is up before proceeding. If not just return.
- * Attempting this while link is negotiating fouled up link
- * stability */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
-
- if (phy_data & MII_SR_LINK_STATUS) {
- for (cnt = 0; cnt < 10; cnt++) {
- /* read once to clear */
- ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
- if (ret_val)
- return ret_val;
- /* and again to get new status */
- ret_val = e1000_read_phy_reg(hw, IGP3_KMRN_DIAG, &phy_data);
- if (ret_val)
- return ret_val;
-
- /* check for PCS lock */
- if (!(phy_data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
- return E1000_SUCCESS;
-
- /* Issue PHY reset */
- e1000_phy_hw_reset(hw);
- mdelay(5);
- }
- /* Disable GigE link negotiation */
- reg = er32(PHY_CTRL);
- ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE |
- E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
-
- /* unable to acquire PCS lock */
- return E1000_ERR_PHY;
- }
-
- return E1000_SUCCESS;
+ return E1000_SUCCESS;
}
-/******************************************************************************
-* Probes the expected PHY address for known PHY IDs
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
+/**
+ * e1000_setup_copper_link - phy/speed/duplex setting
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Detects which PHY is present and sets up the speed and duplex
+ */
+static s32 e1000_setup_copper_link(struct e1000_hw *hw)
{
- s32 phy_init_status, ret_val;
- u16 phy_id_high, phy_id_low;
- bool match = false;
-
- DEBUGFUNC("e1000_detect_gig_phy");
-
- if (hw->phy_id != 0)
- return E1000_SUCCESS;
-
- /* The 82571 firmware may still be configuring the PHY. In this
- * case, we cannot access the PHY until the configuration is done. So
- * we explicitly set the PHY values. */
- if (hw->mac_type == e1000_82571 ||
- hw->mac_type == e1000_82572) {
- hw->phy_id = IGP01E1000_I_PHY_ID;
- hw->phy_type = e1000_phy_igp_2;
- return E1000_SUCCESS;
- }
-
- /* ESB-2 PHY reads require e1000_phy_gg82563 to be set because of a work-
- * around that forces PHY page 0 to be set or the reads fail. The rest of
- * the code in this routine uses e1000_read_phy_reg to read the PHY ID.
- * So for ESB-2 we need to have this set so our reads won't fail. If the
- * attached PHY is not a e1000_phy_gg82563, the routines below will figure
- * this out as well. */
- if (hw->mac_type == e1000_80003es2lan)
- hw->phy_type = e1000_phy_gg82563;
-
- /* Read the PHY ID Registers to identify which PHY is onboard. */
- ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
- if (ret_val)
- return ret_val;
-
- hw->phy_id = (u32)(phy_id_high << 16);
- udelay(20);
- ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
- if (ret_val)
- return ret_val;
-
- hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK);
- hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK;
-
- switch (hw->mac_type) {
- case e1000_82543:
- if (hw->phy_id == M88E1000_E_PHY_ID) match = true;
- break;
- case e1000_82544:
- if (hw->phy_id == M88E1000_I_PHY_ID) match = true;
- break;
- case e1000_82540:
- case e1000_82545:
- case e1000_82545_rev_3:
- case e1000_82546:
- case e1000_82546_rev_3:
- if (hw->phy_id == M88E1011_I_PHY_ID) match = true;
- break;
- case e1000_82541:
- case e1000_82541_rev_2:
- case e1000_82547:
- case e1000_82547_rev_2:
- if (hw->phy_id == IGP01E1000_I_PHY_ID) match = true;
- break;
- case e1000_82573:
- if (hw->phy_id == M88E1111_I_PHY_ID) match = true;
- break;
- case e1000_80003es2lan:
- if (hw->phy_id == GG82563_E_PHY_ID) match = true;
- break;
- case e1000_ich8lan:
- if (hw->phy_id == IGP03E1000_E_PHY_ID) match = true;
- if (hw->phy_id == IFE_E_PHY_ID) match = true;
- if (hw->phy_id == IFE_PLUS_E_PHY_ID) match = true;
- if (hw->phy_id == IFE_C_E_PHY_ID) match = true;
- break;
- default:
- DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
- return -E1000_ERR_CONFIG;
- }
- phy_init_status = e1000_set_phy_type(hw);
-
- if ((match) && (phy_init_status == E1000_SUCCESS)) {
- DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
- return E1000_SUCCESS;
- }
- DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
- return -E1000_ERR_PHY;
-}
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_setup_copper_link");
+
+ /* Check if it is a valid PHY and set PHY mode if necessary. */
+ ret_val = e1000_copper_link_preconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_copper_link_igp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_copper_link_mgp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ }
-/******************************************************************************
-* Resets the PHY's DSP
-*
-* hw - Struct containing variables accessed by shared code
-******************************************************************************/
-static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
-{
- s32 ret_val;
- DEBUGFUNC("e1000_phy_reset_dsp");
-
- do {
- if (hw->phy_type != e1000_phy_gg82563) {
- ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
- if (ret_val) break;
- }
- ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
- if (ret_val) break;
- ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
- if (ret_val) break;
- ret_val = E1000_SUCCESS;
- } while (0);
-
- return ret_val;
-}
+ if (hw->autoneg) {
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
+ ret_val = e1000_copper_link_autoneg(hw);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H,or 100F
+ * depending on value from forced_speed_duplex. */
+ DEBUGOUT("Forcing speed and duplex\n");
+ ret_val = e1000_phy_force_speed_duplex(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Forcing Speed and Duplex\n");
+ return ret_val;
+ }
+ }
-/******************************************************************************
-* Get PHY information from various PHY registers for igp PHY only.
-*
-* hw - Struct containing variables accessed by shared code
-* phy_info - PHY information structure
-******************************************************************************/
-static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
- struct e1000_phy_info *phy_info)
-{
- s32 ret_val;
- u16 phy_data, min_length, max_length, average;
- e1000_rev_polarity polarity;
-
- DEBUGFUNC("e1000_phy_igp_get_info");
-
- /* The downshift status is checked only once, after link is established,
- * and it stored in the hw->speed_downgraded parameter. */
- phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
-
- /* IGP01E1000 does not need to support it. */
- phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
-
- /* IGP01E1000 always correct polarity reversal */
- phy_info->polarity_correction = e1000_polarity_reversal_enabled;
-
- /* Check polarity status */
- ret_val = e1000_check_polarity(hw, &polarity);
- if (ret_val)
- return ret_val;
-
- phy_info->cable_polarity = polarity;
-
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >>
- IGP01E1000_PSSR_MDIX_SHIFT);
-
- if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS) {
- /* Local/Remote Receiver Information are only valid at 1000 Mbps */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
- SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
- e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
- phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
- SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
- e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-
- /* Get cable length */
- ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
- if (ret_val)
- return ret_val;
-
- /* Translate to old method */
- average = (max_length + min_length) / 2;
-
- if (average <= e1000_igp_cable_length_50)
- phy_info->cable_length = e1000_cable_length_50;
- else if (average <= e1000_igp_cable_length_80)
- phy_info->cable_length = e1000_cable_length_50_80;
- else if (average <= e1000_igp_cable_length_110)
- phy_info->cable_length = e1000_cable_length_80_110;
- else if (average <= e1000_igp_cable_length_140)
- phy_info->cable_length = e1000_cable_length_110_140;
- else
- phy_info->cable_length = e1000_cable_length_140;
- }
-
- return E1000_SUCCESS;
-}
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ for (i = 0; i < 10; i++) {
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ /* Config the MAC and PHY after link is up */
+ ret_val = e1000_copper_link_postconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT("Valid link established!!!\n");
+ return E1000_SUCCESS;
+ }
+ udelay(10);
+ }
-/******************************************************************************
-* Get PHY information from various PHY registers for ife PHY only.
-*
-* hw - Struct containing variables accessed by shared code
-* phy_info - PHY information structure
-******************************************************************************/
-static s32 e1000_phy_ife_get_info(struct e1000_hw *hw,
- struct e1000_phy_info *phy_info)
-{
- s32 ret_val;
- u16 phy_data;
- e1000_rev_polarity polarity;
-
- DEBUGFUNC("e1000_phy_ife_get_info");
-
- phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
- phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
-
- ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
- phy_info->polarity_correction =
- ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >>
- IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ?
- e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
-
- if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) {
- ret_val = e1000_check_polarity(hw, &polarity);
- if (ret_val)
- return ret_val;
- } else {
- /* Polarity is forced. */
- polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >>
- IFE_PSC_FORCE_POLARITY_SHIFT) ?
- e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
- }
- phy_info->cable_polarity = polarity;
-
- ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->mdix_mode = (e1000_auto_x_mode)
- ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >>
- IFE_PMC_MDIX_MODE_SHIFT);
-
- return E1000_SUCCESS;
+ DEBUGOUT("Unable to establish link!!!\n");
+ return E1000_SUCCESS;
}
-/******************************************************************************
-* Get PHY information from various PHY registers fot m88 PHY only.
-*
-* hw - Struct containing variables accessed by shared code
-* phy_info - PHY information structure
-******************************************************************************/
-static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
- struct e1000_phy_info *phy_info)
+/**
+ * e1000_phy_setup_autoneg - phy settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures PHY autoneg and flow control advertisement settings
+ */
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
{
- s32 ret_val;
- u16 phy_data;
- e1000_rev_polarity polarity;
-
- DEBUGFUNC("e1000_phy_m88_get_info");
-
- /* The downshift status is checked only once, after link is established,
- * and it stored in the hw->speed_downgraded parameter. */
- phy_info->downshift = (e1000_downshift)hw->speed_downgraded;
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->extended_10bt_distance =
- ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
- M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
- e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal;
-
- phy_info->polarity_correction =
- ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
- M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
- e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
-
- /* Check polarity status */
- ret_val = e1000_check_polarity(hw, &polarity);
- if (ret_val)
- return ret_val;
- phy_info->cable_polarity = polarity;
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >>
- M88E1000_PSSR_MDIX_SHIFT);
-
- if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
- /* Cable Length Estimation and Local/Remote Receiver Information
- * are only valid at 1000 Mbps.
- */
- if (hw->phy_type != e1000_phy_gg82563) {
- phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT);
- } else {
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH);
- }
-
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
- SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
- e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
- phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
- SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
- e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-
- }
-
- return E1000_SUCCESS;
-}
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
-/******************************************************************************
-* Get PHY information from various PHY registers
-*
-* hw - Struct containing variables accessed by shared code
-* phy_info - PHY information structure
-******************************************************************************/
-s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
-{
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_phy_get_info");
-
- phy_info->cable_length = e1000_cable_length_undefined;
- phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
- phy_info->cable_polarity = e1000_rev_polarity_undefined;
- phy_info->downshift = e1000_downshift_undefined;
- phy_info->polarity_correction = e1000_polarity_reversal_undefined;
- phy_info->mdix_mode = e1000_auto_x_mode_undefined;
- phy_info->local_rx = e1000_1000t_rx_status_undefined;
- phy_info->remote_rx = e1000_1000t_rx_status_undefined;
-
- if (hw->media_type != e1000_media_type_copper) {
- DEBUGOUT("PHY info is only valid for copper media\n");
- return -E1000_ERR_CONFIG;
- }
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
- DEBUGOUT("PHY info is only valid if link is up\n");
- return -E1000_ERR_CONFIG;
- }
-
- if (hw->phy_type == e1000_phy_igp ||
- hw->phy_type == e1000_phy_igp_3 ||
- hw->phy_type == e1000_phy_igp_2)
- return e1000_phy_igp_get_info(hw, phy_info);
- else if (hw->phy_type == e1000_phy_ife)
- return e1000_phy_ife_get_info(hw, phy_info);
- else
- return e1000_phy_m88_get_info(hw, phy_info);
-}
+ DEBUGFUNC("e1000_phy_setup_autoneg");
-s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
-{
- DEBUGFUNC("e1000_validate_mdi_settings");
-
- if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
- DEBUGOUT("Invalid MDI setting detected\n");
- hw->mdix = 1;
- return -E1000_ERR_CONFIG;
- }
- return E1000_SUCCESS;
-}
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
-/******************************************************************************
- * Sets up eeprom variables in the hw struct. Must be called after mac_type
- * is configured. Additionally, if this is ICH8, the flash controller GbE
- * registers must be mapped, or this will crash.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-s32 e1000_init_eeprom_params(struct e1000_hw *hw)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd = er32(EECD);
- s32 ret_val = E1000_SUCCESS;
- u16 eeprom_size;
-
- DEBUGFUNC("e1000_init_eeprom_params");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- eeprom->type = e1000_eeprom_microwire;
- eeprom->word_size = 64;
- eeprom->opcode_bits = 3;
- eeprom->address_bits = 6;
- eeprom->delay_usec = 50;
- eeprom->use_eerd = false;
- eeprom->use_eewr = false;
- break;
- case e1000_82540:
- case e1000_82545:
- case e1000_82545_rev_3:
- case e1000_82546:
- case e1000_82546_rev_3:
- eeprom->type = e1000_eeprom_microwire;
- eeprom->opcode_bits = 3;
- eeprom->delay_usec = 50;
- if (eecd & E1000_EECD_SIZE) {
- eeprom->word_size = 256;
- eeprom->address_bits = 8;
- } else {
- eeprom->word_size = 64;
- eeprom->address_bits = 6;
- }
- eeprom->use_eerd = false;
- eeprom->use_eewr = false;
- break;
- case e1000_82541:
- case e1000_82541_rev_2:
- case e1000_82547:
- case e1000_82547_rev_2:
- if (eecd & E1000_EECD_TYPE) {
- eeprom->type = e1000_eeprom_spi;
- eeprom->opcode_bits = 8;
- eeprom->delay_usec = 1;
- if (eecd & E1000_EECD_ADDR_BITS) {
- eeprom->page_size = 32;
- eeprom->address_bits = 16;
- } else {
- eeprom->page_size = 8;
- eeprom->address_bits = 8;
- }
- } else {
- eeprom->type = e1000_eeprom_microwire;
- eeprom->opcode_bits = 3;
- eeprom->delay_usec = 50;
- if (eecd & E1000_EECD_ADDR_BITS) {
- eeprom->word_size = 256;
- eeprom->address_bits = 8;
- } else {
- eeprom->word_size = 64;
- eeprom->address_bits = 6;
- }
- }
- eeprom->use_eerd = false;
- eeprom->use_eewr = false;
- break;
- case e1000_82571:
- case e1000_82572:
- eeprom->type = e1000_eeprom_spi;
- eeprom->opcode_bits = 8;
- eeprom->delay_usec = 1;
- if (eecd & E1000_EECD_ADDR_BITS) {
- eeprom->page_size = 32;
- eeprom->address_bits = 16;
- } else {
- eeprom->page_size = 8;
- eeprom->address_bits = 8;
- }
- eeprom->use_eerd = false;
- eeprom->use_eewr = false;
- break;
- case e1000_82573:
- eeprom->type = e1000_eeprom_spi;
- eeprom->opcode_bits = 8;
- eeprom->delay_usec = 1;
- if (eecd & E1000_EECD_ADDR_BITS) {
- eeprom->page_size = 32;
- eeprom->address_bits = 16;
- } else {
- eeprom->page_size = 8;
- eeprom->address_bits = 8;
- }
- eeprom->use_eerd = true;
- eeprom->use_eewr = true;
- if (!e1000_is_onboard_nvm_eeprom(hw)) {
- eeprom->type = e1000_eeprom_flash;
- eeprom->word_size = 2048;
-
- /* Ensure that the Autonomous FLASH update bit is cleared due to
- * Flash update issue on parts which use a FLASH for NVM. */
- eecd &= ~E1000_EECD_AUPDEN;
- ew32(EECD, eecd);
- }
- break;
- case e1000_80003es2lan:
- eeprom->type = e1000_eeprom_spi;
- eeprom->opcode_bits = 8;
- eeprom->delay_usec = 1;
- if (eecd & E1000_EECD_ADDR_BITS) {
- eeprom->page_size = 32;
- eeprom->address_bits = 16;
- } else {
- eeprom->page_size = 8;
- eeprom->address_bits = 8;
- }
- eeprom->use_eerd = true;
- eeprom->use_eewr = false;
- break;
- case e1000_ich8lan:
- {
- s32 i = 0;
- u32 flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG);
-
- eeprom->type = e1000_eeprom_ich8;
- eeprom->use_eerd = false;
- eeprom->use_eewr = false;
- eeprom->word_size = E1000_SHADOW_RAM_WORDS;
-
- /* Zero the shadow RAM structure. But don't load it from NVM
- * so as to save time for driver init */
- if (hw->eeprom_shadow_ram != NULL) {
- for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
- hw->eeprom_shadow_ram[i].modified = false;
- hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
- }
- }
-
- hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) *
- ICH_FLASH_SECTOR_SIZE;
-
- hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1;
- hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK);
-
- hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE;
-
- hw->flash_bank_size /= 2 * sizeof(u16);
-
- break;
- }
- default:
- break;
- }
-
- if (eeprom->type == e1000_eeprom_spi) {
- /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
- * 32KB (incremented by powers of 2).
- */
- if (hw->mac_type <= e1000_82547_rev_2) {
- /* Set to default value for initial eeprom read. */
- eeprom->word_size = 64;
- ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
- if (ret_val)
- return ret_val;
- eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
- /* 256B eeprom size was not supported in earlier hardware, so we
- * bump eeprom_size up one to ensure that "1" (which maps to 256B)
- * is never the result used in the shifting logic below. */
- if (eeprom_size)
- eeprom_size++;
- } else {
- eeprom_size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
- E1000_EECD_SIZE_EX_SHIFT);
- }
-
- eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
- }
- return ret_val;
-}
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
-/******************************************************************************
- * Raises the EEPROM's clock input.
- *
- * hw - Struct containing variables accessed by shared code
- * eecd - EECD's current value
- *****************************************************************************/
-static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
-{
- /* Raise the clock input to the EEPROM (by setting the SK bit), and then
- * wait <delay> microseconds.
- */
- *eecd = *eecd | E1000_EECD_SK;
- ew32(EECD, *eecd);
- E1000_WRITE_FLUSH();
- udelay(hw->eeprom.delay_usec);
-}
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
-/******************************************************************************
- * Lowers the EEPROM's clock input.
- *
- * hw - Struct containing variables accessed by shared code
- * eecd - EECD's current value
- *****************************************************************************/
-static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
-{
- /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
- * wait 50 microseconds.
- */
- *eecd = *eecd & ~E1000_EECD_SK;
- ew32(EECD, *eecd);
- E1000_WRITE_FLUSH();
- udelay(hw->eeprom.delay_usec);
-}
+ DEBUGOUT1("autoneg_advertised %x\n", hw->autoneg_advertised);
-/******************************************************************************
- * Shift data bits out to the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * data - data to send to the EEPROM
- * count - number of bits to shift out
- *****************************************************************************/
-static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd;
- u32 mask;
-
- /* We need to shift "count" bits out to the EEPROM. So, value in the
- * "data" parameter will be shifted out to the EEPROM one bit at a time.
- * In order to do this, "data" must be broken down into bits.
- */
- mask = 0x01 << (count - 1);
- eecd = er32(EECD);
- if (eeprom->type == e1000_eeprom_microwire) {
- eecd &= ~E1000_EECD_DO;
- } else if (eeprom->type == e1000_eeprom_spi) {
- eecd |= E1000_EECD_DO;
- }
- do {
- /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
- * and then raising and then lowering the clock (the SK bit controls
- * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
- * by setting "DI" to "0" and then raising and then lowering the clock.
- */
- eecd &= ~E1000_EECD_DI;
-
- if (data & mask)
- eecd |= E1000_EECD_DI;
-
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
-
- udelay(eeprom->delay_usec);
-
- e1000_raise_ee_clk(hw, &eecd);
- e1000_lower_ee_clk(hw, &eecd);
-
- mask = mask >> 1;
-
- } while (mask);
-
- /* We leave the "DI" bit set to "0" when we leave this routine. */
- eecd &= ~E1000_EECD_DI;
- ew32(EECD, eecd);
-}
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
+ DEBUGOUT("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
-/******************************************************************************
- * Shift data bits in from the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
-{
- u32 eecd;
- u32 i;
- u16 data;
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
+ DEBUGOUT("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
- /* In order to read a register from the EEPROM, we need to shift 'count'
- * bits in from the EEPROM. Bits are "shifted in" by raising the clock
- * input to the EEPROM (setting the SK bit), and then reading the value of
- * the "DO" bit. During this "shifting in" process the "DI" bit should
- * always be clear.
- */
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
+ DEBUGOUT("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
- eecd = er32(EECD);
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
+ DEBUGOUT("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
- eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
- data = 0;
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+ DEBUGOUT
+ ("Advertise 1000mb Half duplex requested, request denied!\n");
+ }
- for (i = 0; i < count; i++) {
- data = data << 1;
- e1000_raise_ee_clk(hw, &eecd);
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+ DEBUGOUT("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
- eecd = er32(EECD);
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE: /* 0 */
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_RX_PAUSE: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ */
+ /* Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ *hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_TX_PAUSE: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case E1000_FC_FULL: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
- eecd &= ~(E1000_EECD_DI);
- if (eecd & E1000_EECD_DO)
- data |= 1;
+ ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
- e1000_lower_ee_clk(hw, &eecd);
- }
+ DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
- return data;
-}
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
-/******************************************************************************
- * Prepares EEPROM for access
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
- * function should be called before issuing a command to the EEPROM.
- *****************************************************************************/
-static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd, i=0;
-
- DEBUGFUNC("e1000_acquire_eeprom");
-
- if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
- return -E1000_ERR_SWFW_SYNC;
- eecd = er32(EECD);
-
- if (hw->mac_type != e1000_82573) {
- /* Request EEPROM Access */
- if (hw->mac_type > e1000_82544) {
- eecd |= E1000_EECD_REQ;
- ew32(EECD, eecd);
- eecd = er32(EECD);
- while ((!(eecd & E1000_EECD_GNT)) &&
- (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
- i++;
- udelay(5);
- eecd = er32(EECD);
- }
- if (!(eecd & E1000_EECD_GNT)) {
- eecd &= ~E1000_EECD_REQ;
- ew32(EECD, eecd);
- DEBUGOUT("Could not acquire EEPROM grant\n");
- e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
- return -E1000_ERR_EEPROM;
- }
- }
- }
-
- /* Setup EEPROM for Read/Write */
-
- if (eeprom->type == e1000_eeprom_microwire) {
- /* Clear SK and DI */
- eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
- ew32(EECD, eecd);
-
- /* Set CS */
- eecd |= E1000_EECD_CS;
- ew32(EECD, eecd);
- } else if (eeprom->type == e1000_eeprom_spi) {
- /* Clear SK and CS */
- eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
- ew32(EECD, eecd);
- udelay(1);
- }
-
- return E1000_SUCCESS;
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Returns EEPROM to a "standby" state
+/**
+ * e1000_phy_force_speed_duplex - force link settings
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void e1000_standby_eeprom(struct e1000_hw *hw)
+ * Force PHY speed and duplex settings to hw->forced_speed_duplex
+ */
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd;
-
- eecd = er32(EECD);
-
- if (eeprom->type == e1000_eeprom_microwire) {
- eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
-
- /* Clock high */
- eecd |= E1000_EECD_SK;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
-
- /* Select EEPROM */
- eecd |= E1000_EECD_CS;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
-
- /* Clock low */
- eecd &= ~E1000_EECD_SK;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
- } else if (eeprom->type == e1000_eeprom_spi) {
- /* Toggle CS to flush commands */
- eecd |= E1000_EECD_CS;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
- eecd &= ~E1000_EECD_CS;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
- }
-}
+ u32 ctrl;
+ s32 ret_val;
+ u16 mii_ctrl_reg;
+ u16 mii_status_reg;
+ u16 phy_data;
+ u16 i;
+
+ DEBUGFUNC("e1000_phy_force_speed_duplex");
+
+ /* Turn off Flow control if we are forcing speed and duplex. */
+ hw->fc = E1000_FC_NONE;
+
+ DEBUGOUT1("hw->fc = %d\n", hw->fc);
+
+ /* Read the Device Control Register. */
+ ctrl = er32(CTRL);
+
+ /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(DEVICE_SPEED_MASK);
+
+ /* Clear the Auto Speed Detect Enable bit. */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Read the MII Control Register. */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* We need to disable autoneg in order to force link and duplex. */
+
+ mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Are we forcing Full or Half Duplex? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_10_full) {
+ /* We want to force full duplex so we SET the full duplex bits in the
+ * Device and MII Control Registers.
+ */
+ ctrl |= E1000_CTRL_FD;
+ mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ /* We want to force half duplex so we CLEAR the full duplex bits in
+ * the Device and MII Control Registers.
+ */
+ ctrl &= ~E1000_CTRL_FD;
+ mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
+ DEBUGOUT("Half Duplex\n");
+ }
-/******************************************************************************
- * Terminates a command by inverting the EEPROM's chip select pin
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void e1000_release_eeprom(struct e1000_hw *hw)
-{
- u32 eecd;
+ /* Are we forcing 100Mbps??? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_100_half) {
+ /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
+ ctrl |= E1000_CTRL_SPD_100;
+ mii_ctrl_reg |= MII_CR_SPEED_100;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ DEBUGOUT("Forcing 100mb ");
+ } else {
+ /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ mii_ctrl_reg |= MII_CR_SPEED_10;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ DEBUGOUT("Forcing 10mb ");
+ }
- DEBUGFUNC("e1000_release_eeprom");
+ e1000_config_collision_dist(hw);
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+
+ if (hw->phy_type == e1000_phy_m88) {
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed are duplex are forced.
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ DEBUGOUT1("M88E1000 PSCR: %x \n", phy_data);
+
+ /* Need to reset the PHY or these changes will be ignored */
+ mii_ctrl_reg |= MII_CR_RESET;
+
+ /* Disable MDI-X support for 10/100 */
+ } else {
+ /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed or duplex are forced.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
- eecd = er32(EECD);
+ /* Write back the modified PHY MII control register. */
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
- if (hw->eeprom.type == e1000_eeprom_spi) {
- eecd |= E1000_EECD_CS; /* Pull CS high */
- eecd &= ~E1000_EECD_SK; /* Lower SCK */
+ udelay(1);
- ew32(EECD, eecd);
+ /* The wait_autoneg_complete flag may be a little misleading here.
+ * Since we are forcing speed and duplex, Auto-Neg is not enabled.
+ * But we do want to delay for a period while forcing only so we
+ * don't generate false No Link messages. So we will wait here
+ * only if the user has set wait_autoneg_complete to 1, which is
+ * the default.
+ */
+ if (hw->wait_autoneg_complete) {
+ /* We will wait for autoneg to complete. */
+ DEBUGOUT("Waiting for forced speed/duplex link.\n");
+ mii_status_reg = 0;
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ msleep(100);
+ }
+ if ((i == 0) && (hw->phy_type == e1000_phy_m88)) {
+ /* We didn't get link. Reset the DSP and wait again for link. */
+ ret_val = e1000_phy_reset_dsp(hw);
+ if (ret_val) {
+ DEBUGOUT("Error Resetting PHY DSP\n");
+ return ret_val;
+ }
+ }
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ msleep(100);
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ }
+ }
- udelay(hw->eeprom.delay_usec);
- } else if (hw->eeprom.type == e1000_eeprom_microwire) {
- /* cleanup eeprom */
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This value
+ * defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* In addition, because of the s/w reset above, we need to enable CRS on
+ * TX. This must be set for both full and half duplex operation.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543)
+ && (!hw->autoneg)
+ && (hw->forced_speed_duplex == e1000_10_full
+ || hw->forced_speed_duplex == e1000_10_half)) {
+ ret_val = e1000_polarity_reversal_workaround(hw);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+ return E1000_SUCCESS;
+}
- /* CS on Microwire is active-high */
- eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+/**
+ * e1000_config_collision_dist - set collision distance register
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sets the collision distance in the Transmit Control register.
+ * Link should have been established previously. Reads the speed and duplex
+ * information from the Device Status register.
+ */
+void e1000_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl, coll_dist;
- ew32(EECD, eecd);
+ DEBUGFUNC("e1000_config_collision_dist");
- /* Rising edge of clock */
- eecd |= E1000_EECD_SK;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(hw->eeprom.delay_usec);
+ if (hw->mac_type < e1000_82543)
+ coll_dist = E1000_COLLISION_DISTANCE_82542;
+ else
+ coll_dist = E1000_COLLISION_DISTANCE;
- /* Falling edge of clock */
- eecd &= ~E1000_EECD_SK;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(hw->eeprom.delay_usec);
- }
+ tctl = er32(TCTL);
- /* Stop requesting EEPROM access */
- if (hw->mac_type > e1000_82544) {
- eecd &= ~E1000_EECD_REQ;
- ew32(EECD, eecd);
- }
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= coll_dist << E1000_COLD_SHIFT;
- e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
}
-/******************************************************************************
- * Reads a 16 bit word from the EEPROM.
+/**
+ * e1000_config_mac_to_phy - sync phy and mac settings
+ * @hw: Struct containing variables accessed by shared code
+ * @mii_reg: data to write to the MII control register
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
+ * Sets MAC speed and duplex settings to reflect the those in the PHY
+ * The contents of the PHY register containing the needed information need to
+ * be passed in.
+ */
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
{
- u16 retry_count = 0;
- u8 spi_stat_reg;
-
- DEBUGFUNC("e1000_spi_eeprom_ready");
-
- /* Read "Status Register" repeatedly until the LSB is cleared. The
- * EEPROM will signal that the command has been completed by clearing
- * bit 0 of the internal status register. If it's not cleared within
- * 5 milliseconds, then error out.
- */
- retry_count = 0;
- do {
- e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
- hw->eeprom.opcode_bits);
- spi_stat_reg = (u8)e1000_shift_in_ee_bits(hw, 8);
- if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
- break;
-
- udelay(5);
- retry_count += 5;
-
- e1000_standby_eeprom(hw);
- } while (retry_count < EEPROM_MAX_RETRY_SPI);
-
- /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
- * only 0-5mSec on 5V devices)
- */
- if (retry_count >= EEPROM_MAX_RETRY_SPI) {
- DEBUGOUT("SPI EEPROM Status error\n");
- return -E1000_ERR_EEPROM;
- }
-
- return E1000_SUCCESS;
-}
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
-/******************************************************************************
- * Reads a 16 bit word from the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- s32 ret;
- spin_lock(&e1000_eeprom_lock);
- ret = e1000_do_read_eeprom(hw, offset, words, data);
- spin_unlock(&e1000_eeprom_lock);
- return ret;
-}
+ DEBUGFUNC("e1000_config_mac_to_phy");
-static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 i = 0;
-
- DEBUGFUNC("e1000_read_eeprom");
-
- /* If eeprom is not yet detected, do so now */
- if (eeprom->word_size == 0)
- e1000_init_eeprom_params(hw);
-
- /* A check for invalid values: offset too large, too many words, and not
- * enough words.
- */
- if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
- (words == 0)) {
- DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size);
- return -E1000_ERR_EEPROM;
- }
-
- /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
- * directly. In this case, we need to acquire the EEPROM so that
- * FW or other port software does not interrupt.
- */
- if (e1000_is_onboard_nvm_eeprom(hw) && !hw->eeprom.use_eerd) {
- /* Prepare the EEPROM for bit-bang reading */
- if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
- return -E1000_ERR_EEPROM;
- }
-
- /* Eerd register EEPROM access requires no eeprom aquire/release */
- if (eeprom->use_eerd)
- return e1000_read_eeprom_eerd(hw, offset, words, data);
-
- /* ICH EEPROM access is done via the ICH flash controller */
- if (eeprom->type == e1000_eeprom_ich8)
- return e1000_read_eeprom_ich8(hw, offset, words, data);
-
- /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
- * acquired the EEPROM at this point, so any returns should relase it */
- if (eeprom->type == e1000_eeprom_spi) {
- u16 word_in;
- u8 read_opcode = EEPROM_READ_OPCODE_SPI;
-
- if (e1000_spi_eeprom_ready(hw)) {
- e1000_release_eeprom(hw);
- return -E1000_ERR_EEPROM;
- }
-
- e1000_standby_eeprom(hw);
-
- /* Some SPI eeproms use the 8th address bit embedded in the opcode */
- if ((eeprom->address_bits == 8) && (offset >= 128))
- read_opcode |= EEPROM_A8_OPCODE_SPI;
-
- /* Send the READ command (opcode + addr) */
- e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16)(offset*2), eeprom->address_bits);
-
- /* Read the data. The address of the eeprom internally increments with
- * each byte (spi) being read, saving on the overhead of eeprom setup
- * and tear-down. The address counter will roll over if reading beyond
- * the size of the eeprom, thus allowing the entire memory to be read
- * starting from any offset. */
- for (i = 0; i < words; i++) {
- word_in = e1000_shift_in_ee_bits(hw, 16);
- data[i] = (word_in >> 8) | (word_in << 8);
- }
- } else if (eeprom->type == e1000_eeprom_microwire) {
- for (i = 0; i < words; i++) {
- /* Send the READ command (opcode + addr) */
- e1000_shift_out_ee_bits(hw, EEPROM_READ_OPCODE_MICROWIRE,
- eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16)(offset + i),
- eeprom->address_bits);
-
- /* Read the data. For microwire, each word requires the overhead
- * of eeprom setup and tear-down. */
- data[i] = e1000_shift_in_ee_bits(hw, 16);
- e1000_standby_eeprom(hw);
- }
- }
-
- /* End this read operation */
- e1000_release_eeprom(hw);
-
- return E1000_SUCCESS;
-}
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
+ * MAC speed/duplex configuration.*/
+ if (hw->mac_type >= e1000_82544)
+ return E1000_SUCCESS;
-/******************************************************************************
- * Reads a 16 bit word from the EEPROM using the EERD register.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- u32 i, eerd = 0;
- s32 error = 0;
+ /* Read the Device Control Register and set the bits to Force Speed
+ * and Duplex.
+ */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
- for (i = 0; i < words; i++) {
- eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) +
- E1000_EEPROM_RW_REG_START;
+ /* Set up duplex in the Device Control and Transmit Control
+ * registers depending on negotiated values.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
- ew32(EERD, eerd);
- error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ);
+ if (phy_data & M88E1000_PSSR_DPLX)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
- if (error) {
- break;
- }
- data[i] = (er32(EERD) >> E1000_EEPROM_RW_REG_DATA);
+ e1000_config_collision_dist(hw);
- }
+ /* Set up speed in the Device Control register depending on
+ * negotiated values.
+ */
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+ ctrl |= E1000_CTRL_SPD_1000;
+ else if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS)
+ ctrl |= E1000_CTRL_SPD_100;
- return error;
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Writes a 16 bit word from the EEPROM using the EEWR register.
+/**
+ * e1000_force_mac_fc - force flow control settings
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- * offset - offset of word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
+ * Forces the MAC's flow control settings.
+ * Sets the TFCE and RFCE bits in the device control register to reflect
+ * the adapter settings. TFCE and RFCE need to be explicitly set by
+ * software when a Copper PHY is used because autonegotiation is managed
+ * by the PHY rather than the MAC. Software must also configure these
+ * bits when link is forced on a fiber connection.
+ */
+s32 e1000_force_mac_fc(struct e1000_hw *hw)
{
- u32 register_value = 0;
- u32 i = 0;
- s32 error = 0;
+ u32 ctrl;
+
+ DEBUGFUNC("e1000_force_mac_fc");
+
+ /* Get the current configuration of the Device Control Register */
+ ctrl = er32(CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
- if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM))
- return -E1000_ERR_SWFW_SYNC;
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case E1000_FC_RX_PAUSE:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case E1000_FC_TX_PAUSE:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case E1000_FC_FULL:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ DEBUGOUT("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
- for (i = 0; i < words; i++) {
- register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) |
- ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) |
- E1000_EEPROM_RW_REG_START;
+ /* Disable TX Flow Control for 82542 (rev 2.0) */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ ctrl &= (~E1000_CTRL_TFCE);
- error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
- if (error) {
- break;
- }
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
- ew32(EEWR, register_value);
+/**
+ * e1000_config_fc_after_link_up - configure flow control after autoneg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures flow control settings after link is established
+ * Should be called immediately after a valid link has been established.
+ * Forces MAC flow control settings if link was forced. When in MII/GMII mode
+ * and autonegotiation is enabled, the MAC flow control settings will be set
+ * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
+ * and RFCE bits will be automatically set to the negotiated flow control mode.
+ */
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 mii_nway_adv_reg;
+ u16 mii_nway_lp_ability_reg;
+ u16 speed;
+ u16 duplex;
- error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE);
+ DEBUGFUNC("e1000_config_fc_after_link_up");
- if (error) {
- break;
- }
- }
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed))
+ || ((hw->media_type == e1000_media_type_internal_serdes)
+ && (hw->autoneg_failed))
+ || ((hw->media_type == e1000_media_type_copper)
+ && (!hw->autoneg))) {
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
- e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM);
- return error;
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement Register
+ * (Address 4) and the Auto_Negotiation Base Page Ability
+ * Register (Address 5) to determine how flow control was
+ * negotiated.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | E1000_FC_NONE
+ * 0 | 1 | 0 | DC | E1000_FC_NONE
+ * 0 | 1 | 1 | 0 | E1000_FC_NONE
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ * 1 | 0 | 0 | DC | E1000_FC_NONE
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ * 1 | 1 | 0 | 0 | E1000_FC_NONE
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ /* Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->original_fc == E1000_FC_FULL) {
+ hw->fc = E1000_FC_FULL;
+ DEBUGOUT("Flow Control = FULL.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ *
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = E1000_FC_TX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = TX PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->original_fc == E1000_FC_NONE ||
+ hw->original_fc == E1000_FC_TX_PAUSE) ||
+ hw->fc_strict_ieee) {
+ hw->fc = E1000_FC_NONE;
+ DEBUGOUT("Flow Control = NONE.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ DEBUGOUT
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val =
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc = E1000_FC_NONE;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ } else {
+ DEBUGOUT
+ ("Copper PHY and Auto Neg has not completed.\n");
+ }
+ }
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Polls the status bit (bit 1) of the EERD to determine when the read is done.
+/**
+ * e1000_check_for_serdes_link_generic - Check for link (Serdes)
+ * @hw: pointer to the HW structure
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd)
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ */
+static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
{
- u32 attempts = 100000;
- u32 i, reg = 0;
- s32 done = E1000_ERR_EEPROM;
-
- for (i = 0; i < attempts; i++) {
- if (eerd == E1000_EEPROM_POLL_READ)
- reg = er32(EERD);
- else
- reg = er32(EEWR);
-
- if (reg & E1000_EEPROM_RW_REG_DONE) {
- done = E1000_SUCCESS;
- break;
- }
- udelay(5);
- }
-
- return done;
-}
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ s32 ret_val = E1000_SUCCESS;
-/***************************************************************************
-* Description: Determines if the onboard NVM is FLASH or EEPROM.
-*
-* hw - Struct containing variables accessed by shared code
-****************************************************************************/
-static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw)
-{
- u32 eecd = 0;
+ DEBUGFUNC("e1000_check_for_serdes_link_generic");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ rxcw = er32(RXCW);
- DEBUGFUNC("e1000_is_onboard_nvm_eeprom");
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
+ * cannot auto-negotiate), and our link partner is not trying to
+ * auto-negotiate with us (we are receiving idles or data),
+ * we need to force link up. We also need to give auto-negotiation
+ * time to complete.
+ */
+ /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+ if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
+ if (hw->autoneg_failed == 0) {
+ hw->autoneg_failed = 1;
+ goto out;
+ }
+ DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n");
- if (hw->mac_type == e1000_ich8lan)
- return false;
+ /* Disable auto-negotiation in the TXCW register */
+ ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
- if (hw->mac_type == e1000_82573) {
- eecd = er32(EECD);
+ /* Force link-up and also force full-duplex. */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ goto out;
+ }
+ } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ /*
+ * If we are forcing link and we are receiving /C/ ordered
+ * sets, re-enable auto-negotiation in the TXCW register
+ * and disable forced link in the Device Control register
+ * in an attempt to auto-negotiate with our link partner.
+ */
+ DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ ew32(TXCW, hw->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ hw->serdes_has_link = true;
+ } else if (!(E1000_TXCW_ANE & er32(TXCW))) {
+ /*
+ * If we force link for non-auto-negotiation switch, check
+ * link status based on MAC synchronization for internal
+ * serdes media type.
+ */
+ /* SYNCH bit and IV bit are sticky. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_has_link = true;
+ DEBUGOUT("SERDES: Link up - forced.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - force failed.\n");
+ }
+ }
- /* Isolate bits 15 & 16 */
- eecd = ((eecd >> 15) & 0x03);
+ if (E1000_TXCW_ANE & er32(TXCW)) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ /* SYNCH bit and IV bit are sticky, so reread rxcw. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_has_link = true;
+ DEBUGOUT("SERDES: Link up - autoneg "
+ "completed successfully.\n");
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - invalid"
+ "codewords detected in autoneg.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - no sync.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ DEBUGOUT("SERDES: Link down - autoneg failed\n");
+ }
+ }
- /* If both bits are set, device is Flash type */
- if (eecd == 0x03) {
- return false;
- }
- }
- return true;
+ out:
+ return ret_val;
}
-/******************************************************************************
- * Verifies that the EEPROM has a valid checksum
+/**
+ * e1000_check_for_link
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- *
- * Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
- * valid.
- *****************************************************************************/
-s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
+ * Checks to see if the link status of the hardware has changed.
+ * Called by any function that needs to check the link status of the adapter.
+ */
+s32 e1000_check_for_link(struct e1000_hw *hw)
{
- u16 checksum = 0;
- u16 i, eeprom_data;
-
- DEBUGFUNC("e1000_validate_eeprom_checksum");
-
- if ((hw->mac_type == e1000_82573) && !e1000_is_onboard_nvm_eeprom(hw)) {
- /* Check bit 4 of word 10h. If it is 0, firmware is done updating
- * 10h-12h. Checksum may need to be fixed. */
- e1000_read_eeprom(hw, 0x10, 1, &eeprom_data);
- if ((eeprom_data & 0x10) == 0) {
- /* Read 0x23 and check bit 15. This bit is a 1 when the checksum
- * has already been fixed. If the checksum is still wrong and this
- * bit is a 1, we need to return bad checksum. Otherwise, we need
- * to set this bit to a 1 and update the checksum. */
- e1000_read_eeprom(hw, 0x23, 1, &eeprom_data);
- if ((eeprom_data & 0x8000) == 0) {
- eeprom_data |= 0x8000;
- e1000_write_eeprom(hw, 0x23, 1, &eeprom_data);
- e1000_update_eeprom_checksum(hw);
- }
- }
- }
-
- if (hw->mac_type == e1000_ich8lan) {
- /* Drivers must allocate the shadow ram structure for the
- * EEPROM checksum to be updated. Otherwise, this bit as well
- * as the checksum must both be set correctly for this
- * validation to pass.
- */
- e1000_read_eeprom(hw, 0x19, 1, &eeprom_data);
- if ((eeprom_data & 0x40) == 0) {
- eeprom_data |= 0x40;
- e1000_write_eeprom(hw, 0x19, 1, &eeprom_data);
- e1000_update_eeprom_checksum(hw);
- }
- }
-
- for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
- if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- checksum += eeprom_data;
- }
-
- if (checksum == (u16)EEPROM_SUM)
- return E1000_SUCCESS;
- else {
- DEBUGOUT("EEPROM Checksum Invalid\n");
- return -E1000_ERR_EEPROM;
- }
+ u32 rxcw = 0;
+ u32 ctrl;
+ u32 status;
+ u32 rctl;
+ u32 icr;
+ u32 signal = 0;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_for_link");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+
+ /* On adapters with a MAC newer than 82544, SW Definable pin 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ */
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) {
+ rxcw = er32(RXCW);
+
+ if (hw->media_type == e1000_media_type_fiber) {
+ signal =
+ (hw->mac_type >
+ e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+ if (status & E1000_STATUS_LU)
+ hw->get_link_status = false;
+ }
+ }
+
+ /* If we have a copper PHY then we only want to go out to the PHY
+ * registers to see if Auto-Neg has completed and/or if our link
+ * status has changed. The get_link_status flag will be set if we
+ * receive a Link Status Change interrupt or we have Rx Sequence
+ * Errors.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ * Read the register twice since the link bit is sticky.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ hw->get_link_status = false;
+ /* Check if there was DownShift, must be checked immediately after
+ * link-up */
+ e1000_check_downshift(hw);
+
+ /* If we are on 82544 or 82543 silicon and speed/duplex
+ * are forced to 10H or 10F, then we will implement the polarity
+ * reversal workaround. We disable interrupts first, and upon
+ * returning, place the devices interrupt state to its previous
+ * value except for the link status change interrupt which will
+ * happen due to the execution of this workaround.
+ */
+
+ if ((hw->mac_type == e1000_82544
+ || hw->mac_type == e1000_82543) && (!hw->autoneg)
+ && (hw->forced_speed_duplex == e1000_10_full
+ || hw->forced_speed_duplex == e1000_10_half)) {
+ ew32(IMC, 0xffffffff);
+ ret_val =
+ e1000_polarity_reversal_workaround(hw);
+ icr = er32(ICR);
+ ew32(ICS, (icr & ~E1000_ICS_LSC));
+ ew32(IMS, IMS_ENABLE_MASK);
+ }
+
+ } else {
+ /* No link detected */
+ e1000_config_dsp_after_link_change(hw, false);
+ return 0;
+ }
+
+ /* If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!hw->autoneg)
+ return -E1000_ERR_CONFIG;
+
+ /* optimize the dsp settings for the igp phy */
+ e1000_config_dsp_after_link_change(hw, true);
+
+ /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
+ * have Si on board that is 82544 or newer, Auto
+ * Speed Detection takes care of MAC speed/duplex
+ * configuration. So we only need to configure Collision
+ * Distance in the MAC. Otherwise, we need to force
+ * speed/duplex on the MAC to the current PHY speed/duplex
+ * settings.
+ */
+ if (hw->mac_type >= e1000_82544)
+ e1000_config_collision_dist(hw);
+ else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure Flow Control now that Auto-Neg has completed. First, we
+ * need to restore the desired flow control settings because we may
+ * have had to re-autoneg with a different link partner.
+ */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ DEBUGOUT("Error configuring flow control\n");
+ return ret_val;
+ }
+
+ /* At this point we know that we are on copper and we have
+ * auto-negotiated link. These are conditions for checking the link
+ * partner capability register. We use the link speed to determine if
+ * TBI compatibility needs to be turned on or off. If the link is not
+ * at gigabit speed, then TBI compatibility is not needed. If we are
+ * at gigabit speed, we turn on TBI compatibility.
+ */
+ if (hw->tbi_compatibility_en) {
+ u16 speed, duplex;
+ ret_val =
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT
+ ("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+ if (speed != SPEED_1000) {
+ /* If link speed is not set to gigabit speed, we do not need
+ * to enable TBI compatibility.
+ */
+ if (hw->tbi_compatibility_on) {
+ /* If we previously were in the mode, turn it off. */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ hw->tbi_compatibility_on = false;
+ }
+ } else {
+ /* If TBI compatibility is was previously off, turn it on. For
+ * compatibility with a TBI link partner, we will store bad
+ * packets. Some frames have an additional byte on the end and
+ * will look like CRC errors to to the hardware.
+ */
+ if (!hw->tbi_compatibility_on) {
+ hw->tbi_compatibility_on = true;
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ }
+ }
+ }
+ }
+
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes))
+ e1000_check_for_serdes_link_generic(hw);
+
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Calculates the EEPROM checksum and writes it to the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
- * Writes the difference to word offset 63 of the EEPROM.
- *****************************************************************************/
-s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
+/**
+ * e1000_get_speed_and_duplex
+ * @hw: Struct containing variables accessed by shared code
+ * @speed: Speed of the connection
+ * @duplex: Duplex setting of the connection
+
+ * Detects the current speed and duplex settings of the hardware.
+ */
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
{
- u32 ctrl_ext;
- u16 checksum = 0;
- u16 i, eeprom_data;
-
- DEBUGFUNC("e1000_update_eeprom_checksum");
-
- for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
- if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- checksum += eeprom_data;
- }
- checksum = (u16)EEPROM_SUM - checksum;
- if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
- DEBUGOUT("EEPROM Write Error\n");
- return -E1000_ERR_EEPROM;
- } else if (hw->eeprom.type == e1000_eeprom_flash) {
- e1000_commit_shadow_ram(hw);
- } else if (hw->eeprom.type == e1000_eeprom_ich8) {
- e1000_commit_shadow_ram(hw);
- /* Reload the EEPROM, or else modifications will not appear
- * until after next adapter reset. */
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- ew32(CTRL_EXT, ctrl_ext);
- msleep(10);
- }
- return E1000_SUCCESS;
+ u32 status;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_get_speed_and_duplex");
+
+ if (hw->mac_type >= e1000_82543) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ DEBUGOUT("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ DEBUGOUT("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ DEBUGOUT("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ DEBUGOUT("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ DEBUGOUT(" Half Duplex\n");
+ }
+ } else {
+ DEBUGOUT("1000 Mbs, Full Duplex\n");
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+ }
+
+ /* IGP01 PHY may advertise full duplex operation after speed downgrade even
+ * if it is operating at half duplex. Here we set the duplex settings to
+ * match the duplex in the link partner's capabilities.
+ */
+ if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
+ *duplex = HALF_DUPLEX;
+ else {
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if ((*speed == SPEED_100
+ && !(phy_data & NWAY_LPAR_100TX_FD_CAPS))
+ || (*speed == SPEED_10
+ && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+ *duplex = HALF_DUPLEX;
+ }
+ }
+
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Parent function for writing words to the different EEPROM types.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset within the EEPROM to be written to
- * words - number of words to write
- * data - 16 bit word to be written to the EEPROM
+/**
+ * e1000_wait_autoneg
+ * @hw: Struct containing variables accessed by shared code
*
- * If e1000_update_eeprom_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
- *****************************************************************************/
-s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+ * Blocks until autoneg completes or times out (~4.5 seconds)
+ */
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
{
- s32 ret;
- spin_lock(&e1000_eeprom_lock);
- ret = e1000_do_write_eeprom(hw, offset, words, data);
- spin_unlock(&e1000_eeprom_lock);
- return ret;
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_wait_autoneg");
+ DEBUGOUT("Waiting for Auto-Neg to complete.\n");
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg
+ * Complete bit to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ return E1000_SUCCESS;
+ }
+ msleep(100);
+ }
+ return E1000_SUCCESS;
}
+/**
+ * e1000_raise_mdi_clk - Raises the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Raise the clock input to the Management Data Clock (by setting the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
-static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+/**
+ * e1000_lower_mdi_clk - Lowers the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- s32 status = 0;
-
- DEBUGFUNC("e1000_write_eeprom");
-
- /* If eeprom is not yet detected, do so now */
- if (eeprom->word_size == 0)
- e1000_init_eeprom_params(hw);
-
- /* A check for invalid values: offset too large, too many words, and not
- * enough words.
- */
- if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) ||
- (words == 0)) {
- DEBUGOUT("\"words\" parameter out of bounds\n");
- return -E1000_ERR_EEPROM;
- }
-
- /* 82573 writes only through eewr */
- if (eeprom->use_eewr)
- return e1000_write_eeprom_eewr(hw, offset, words, data);
-
- if (eeprom->type == e1000_eeprom_ich8)
- return e1000_write_eeprom_ich8(hw, offset, words, data);
-
- /* Prepare the EEPROM for writing */
- if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
- return -E1000_ERR_EEPROM;
-
- if (eeprom->type == e1000_eeprom_microwire) {
- status = e1000_write_eeprom_microwire(hw, offset, words, data);
- } else {
- status = e1000_write_eeprom_spi(hw, offset, words, data);
- msleep(10);
- }
-
- /* Done with writing */
- e1000_release_eeprom(hw);
-
- return status;
+ /* Lower the clock input to the Management Data Clock (by clearing the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
}
-/******************************************************************************
- * Writes a 16 bit word to a given offset in an SPI EEPROM.
+/**
+ * e1000_shift_out_mdi_bits - Shifts data bits out to the PHY
+ * @hw: Struct containing variables accessed by shared code
+ * @data: Data to send out to the PHY
+ * @count: Number of bits to shift out
*
- * hw - Struct containing variables accessed by shared code
- * offset - offset within the EEPROM to be written to
- * words - number of words to write
- * data - pointer to array of 8 bit words to be written to the EEPROM
- *
- *****************************************************************************/
-static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
+ * Bits are shifted out in MSB to LSB order.
+ */
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u16 widx = 0;
+ u32 ctrl;
+ u32 mask;
- DEBUGFUNC("e1000_write_eeprom_spi");
+ /* We need to shift "count" number of bits out to the PHY. So, the value
+ * in the "data" parameter will be shifted out to the PHY one bit at a
+ * time. In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01;
+ mask <<= (count - 1);
- while (widx < words) {
- u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
+ ctrl = er32(CTRL);
- if (e1000_spi_eeprom_ready(hw)) return -E1000_ERR_EEPROM;
+ /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
+ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
- e1000_standby_eeprom(hw);
+ while (mask) {
+ /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
+ * then raising and lowering the Management Data Clock. A "0" is
+ * shifted out to the PHY by setting the MDIO bit to "0" and then
+ * raising and lowering the clock.
+ */
+ if (data & mask)
+ ctrl |= E1000_CTRL_MDIO;
+ else
+ ctrl &= ~E1000_CTRL_MDIO;
- /* Send the WRITE ENABLE command (8 bit opcode ) */
- e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
- eeprom->opcode_bits);
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
- e1000_standby_eeprom(hw);
+ udelay(10);
- /* Some SPI eeproms use the 8th address bit embedded in the opcode */
- if ((eeprom->address_bits == 8) && (offset >= 128))
- write_opcode |= EEPROM_A8_OPCODE_SPI;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
- /* Send the Write command (8-bit opcode + addr) */
- e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
+ mask = mask >> 1;
+ }
+}
- e1000_shift_out_ee_bits(hw, (u16)((offset + widx)*2),
- eeprom->address_bits);
+/**
+ * e1000_shift_in_mdi_bits - Shifts data bits in from the PHY
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Bits are shifted in in MSB to LSB order.
+ */
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u16 data = 0;
+ u8 i;
- /* Send the data */
+ /* In order to read a register from the PHY, we need to shift in a total
+ * of 18 bits from the PHY. The first two bit (turnaround) times are used
+ * to avoid contention on the MDIO pin when a read operation is performed.
+ * These two bits are ignored by us and thrown away. Bits are "shifted in"
+ * by raising the input to the Management Data Clock (setting the MDC bit),
+ * and then reading the value of the MDIO bit.
+ */
+ ctrl = er32(CTRL);
- /* Loop to allow for up to whole page write (32 bytes) of eeprom */
- while (widx < words) {
- u16 word_out = data[widx];
- word_out = (word_out >> 8) | (word_out << 8);
- e1000_shift_out_ee_bits(hw, word_out, 16);
- widx++;
+ /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
+ ctrl &= ~E1000_CTRL_MDIO_DIR;
+ ctrl &= ~E1000_CTRL_MDIO;
- /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
- * operation, while the smaller eeproms are capable of an 8-byte
- * PAGE WRITE operation. Break the inner loop to pass new address
- */
- if ((((offset + widx)*2) % eeprom->page_size) == 0) {
- e1000_standby_eeprom(hw);
- break;
- }
- }
- }
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
- return E1000_SUCCESS;
-}
+ /* Raise and Lower the clock before reading in the data. This accounts for
+ * the turnaround bits. The first clock occurred when we clocked out the
+ * last bit of the Register Address.
+ */
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ for (data = 0, i = 0; i < 16; i++) {
+ data = data << 1;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ ctrl = er32(CTRL);
+ /* Check to see if we shifted in a "1". */
+ if (ctrl & E1000_CTRL_MDIO)
+ data |= 1;
+ e1000_lower_mdi_clk(hw, &ctrl);
+ }
-/******************************************************************************
- * Writes a 16 bit word to a given offset in a Microwire EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset within the EEPROM to be written to
- * words - number of words to write
- * data - pointer to array of 16 bit words to be written to the EEPROM
- *
- *****************************************************************************/
-static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd;
- u16 words_written = 0;
- u16 i = 0;
-
- DEBUGFUNC("e1000_write_eeprom_microwire");
-
- /* Send the write enable command to the EEPROM (3-bit opcode plus
- * 6/8-bit dummy address beginning with 11). It's less work to include
- * the 11 of the dummy address as part of the opcode than it is to shift
- * it over the correct number of bits for the address. This puts the
- * EEPROM into write/erase mode.
- */
- e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
- (u16)(eeprom->opcode_bits + 2));
-
- e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
-
- /* Prepare the EEPROM */
- e1000_standby_eeprom(hw);
-
- while (words_written < words) {
- /* Send the Write command (3-bit opcode + addr) */
- e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
- eeprom->opcode_bits);
-
- e1000_shift_out_ee_bits(hw, (u16)(offset + words_written),
- eeprom->address_bits);
-
- /* Send the data */
- e1000_shift_out_ee_bits(hw, data[words_written], 16);
-
- /* Toggle the CS line. This in effect tells the EEPROM to execute
- * the previous command.
- */
- e1000_standby_eeprom(hw);
-
- /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will
- * signal that the command has been completed by raising the DO signal.
- * If DO does not go high in 10 milliseconds, then error out.
- */
- for (i = 0; i < 200; i++) {
- eecd = er32(EECD);
- if (eecd & E1000_EECD_DO) break;
- udelay(50);
- }
- if (i == 200) {
- DEBUGOUT("EEPROM Write did not complete\n");
- return -E1000_ERR_EEPROM;
- }
-
- /* Recover from write */
- e1000_standby_eeprom(hw);
-
- words_written++;
- }
-
- /* Send the write disable command to the EEPROM (3-bit opcode plus
- * 6/8-bit dummy address beginning with 10). It's less work to include
- * the 10 of the dummy address as part of the opcode than it is to shift
- * it over the correct number of bits for the address. This takes the
- * EEPROM out of write/erase mode.
- */
- e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
- (u16)(eeprom->opcode_bits + 2));
-
- e1000_shift_out_ee_bits(hw, 0, (u16)(eeprom->address_bits - 2));
-
- return E1000_SUCCESS;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ return data;
}
-/******************************************************************************
- * Flushes the cached eeprom to NVM. This is done by saving the modified values
- * in the eeprom cache and the non modified values in the currently active bank
- * to the new bank.
+
+/**
+ * e1000_read_phy_reg - read a phy register
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to read
*
- * hw - Struct containing variables accessed by shared code
- * offset - offset of word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-static s32 e1000_commit_shadow_ram(struct e1000_hw *hw)
+ * Reads the value from a PHY register, if the value is on a specific non zero
+ * page, sets the page first.
+ */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
{
- u32 attempts = 100000;
- u32 eecd = 0;
- u32 flop = 0;
- u32 i = 0;
- s32 error = E1000_SUCCESS;
- u32 old_bank_offset = 0;
- u32 new_bank_offset = 0;
- u8 low_byte = 0;
- u8 high_byte = 0;
- bool sector_write_failed = false;
-
- if (hw->mac_type == e1000_82573) {
- /* The flop register will be used to determine if flash type is STM */
- flop = er32(FLOP);
- for (i=0; i < attempts; i++) {
- eecd = er32(EECD);
- if ((eecd & E1000_EECD_FLUPD) == 0) {
- break;
- }
- udelay(5);
- }
-
- if (i == attempts) {
- return -E1000_ERR_EEPROM;
- }
-
- /* If STM opcode located in bits 15:8 of flop, reset firmware */
- if ((flop & 0xFF00) == E1000_STM_OPCODE) {
- ew32(HICR, E1000_HICR_FW_RESET);
- }
-
- /* Perform the flash update */
- ew32(EECD, eecd | E1000_EECD_FLUPD);
-
- for (i=0; i < attempts; i++) {
- eecd = er32(EECD);
- if ((eecd & E1000_EECD_FLUPD) == 0) {
- break;
- }
- udelay(5);
- }
-
- if (i == attempts) {
- return -E1000_ERR_EEPROM;
- }
- }
-
- if (hw->mac_type == e1000_ich8lan && hw->eeprom_shadow_ram != NULL) {
- /* We're writing to the opposite bank so if we're on bank 1,
- * write to bank 0 etc. We also need to erase the segment that
- * is going to be written */
- if (!(er32(EECD) & E1000_EECD_SEC1VAL)) {
- new_bank_offset = hw->flash_bank_size * 2;
- old_bank_offset = 0;
- e1000_erase_ich8_4k_segment(hw, 1);
- } else {
- old_bank_offset = hw->flash_bank_size * 2;
- new_bank_offset = 0;
- e1000_erase_ich8_4k_segment(hw, 0);
- }
-
- sector_write_failed = false;
- /* Loop for every byte in the shadow RAM,
- * which is in units of words. */
- for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
- /* Determine whether to write the value stored
- * in the other NVM bank or a modified value stored
- * in the shadow RAM */
- if (hw->eeprom_shadow_ram[i].modified) {
- low_byte = (u8)hw->eeprom_shadow_ram[i].eeprom_word;
- udelay(100);
- error = e1000_verify_write_ich8_byte(hw,
- (i << 1) + new_bank_offset, low_byte);
-
- if (error != E1000_SUCCESS)
- sector_write_failed = true;
- else {
- high_byte =
- (u8)(hw->eeprom_shadow_ram[i].eeprom_word >> 8);
- udelay(100);
- }
- } else {
- e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset,
- &low_byte);
- udelay(100);
- error = e1000_verify_write_ich8_byte(hw,
- (i << 1) + new_bank_offset, low_byte);
-
- if (error != E1000_SUCCESS)
- sector_write_failed = true;
- else {
- e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1,
- &high_byte);
- udelay(100);
- }
- }
-
- /* If the write of the low byte was successful, go ahead and
- * write the high byte while checking to make sure that if it
- * is the signature byte, then it is handled properly */
- if (!sector_write_failed) {
- /* If the word is 0x13, then make sure the signature bits
- * (15:14) are 11b until the commit has completed.
- * This will allow us to write 10b which indicates the
- * signature is valid. We want to do this after the write
- * has completed so that we don't mark the segment valid
- * while the write is still in progress */
- if (i == E1000_ICH_NVM_SIG_WORD)
- high_byte = E1000_ICH_NVM_SIG_MASK | high_byte;
-
- error = e1000_verify_write_ich8_byte(hw,
- (i << 1) + new_bank_offset + 1, high_byte);
- if (error != E1000_SUCCESS)
- sector_write_failed = true;
-
- } else {
- /* If the write failed then break from the loop and
- * return an error */
- break;
- }
- }
-
- /* Don't bother writing the segment valid bits if sector
- * programming failed. */
- if (!sector_write_failed) {
- /* Finally validate the new segment by setting bit 15:14
- * to 10b in word 0x13 , this can be done without an
- * erase as well since these bits are 11 to start with
- * and we need to change bit 14 to 0b */
- e1000_read_ich8_byte(hw,
- E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset,
- &high_byte);
- high_byte &= 0xBF;
- error = e1000_verify_write_ich8_byte(hw,
- E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte);
- /* And invalidate the previously valid segment by setting
- * its signature word (0x13) high_byte to 0b. This can be
- * done without an erase because flash erase sets all bits
- * to 1's. We can write 1's to 0's without an erase */
- if (error == E1000_SUCCESS) {
- error = e1000_verify_write_ich8_byte(hw,
- E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0);
- }
-
- /* Clear the now not used entry in the cache */
- for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) {
- hw->eeprom_shadow_ram[i].modified = false;
- hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF;
- }
- }
- }
-
- return error;
+ u32 ret_val;
+
+ DEBUGFUNC("e1000_read_phy_reg");
+
+ if ((hw->phy_type == e1000_phy_igp) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16) reg_addr);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ return ret_val;
}
-/******************************************************************************
- * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
- * second function of dual function devices
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-s32 e1000_read_mac_addr(struct e1000_hw *hw)
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data)
{
- u16 offset;
- u16 eeprom_data, i;
-
- DEBUGFUNC("e1000_read_mac_addr");
-
- for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
- offset = i >> 1;
- if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF);
- hw->perm_mac_addr[i+1] = (u8)(eeprom_data >> 8);
- }
-
- switch (hw->mac_type) {
- default:
- break;
- case e1000_82546:
- case e1000_82546_rev_3:
- case e1000_82571:
- case e1000_80003es2lan:
- if (er32(STATUS) & E1000_STATUS_FUNC_1)
- hw->perm_mac_addr[5] ^= 0x01;
- break;
- }
-
- for (i = 0; i < NODE_ADDRESS_SIZE; i++)
- hw->mac_addr[i] = hw->perm_mac_addr[i];
- return E1000_SUCCESS;
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_read_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, and register address in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 64; i++) {
+ udelay(50);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ DEBUGOUT("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *phy_data = (u16) mdic;
+ } else {
+ /* We must first send a preamble through the MDIO pin to signal the
+ * beginning of an MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the next few fields that are required for a read
+ * operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine five different times. The format of
+ * a MII read instruction consists of a shift out of 14 bits and is
+ * defined as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
+ * followed by a shift in of 18 bits. This first two bits shifted in
+ * are TurnAround bits used to avoid contention on the MDIO pin when a
+ * READ operation is performed. These two bits are thrown away
+ * followed by a shift in of 16 bits which contains the desired data.
+ */
+ mdic = ((reg_addr) | (phy_addr << 5) |
+ (PHY_OP_READ << 10) | (PHY_SOF << 12));
+
+ e1000_shift_out_mdi_bits(hw, mdic, 14);
+
+ /* Now that we've shifted out the read command to the MII, we need to
+ * "shift in" the 16-bit value (18 total bits) of the requested PHY
+ * register address.
+ */
+ *phy_data = e1000_shift_in_mdi_bits(hw);
+ }
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Initializes receive address filters.
- *
- * hw - Struct containing variables accessed by shared code
+/**
+ * e1000_write_phy_reg - write a phy register
*
- * Places the MAC address in receive address register 0 and clears the rest
- * of the receive addresss registers. Clears the multicast table. Assumes
- * the receiver is in reset when the routine is called.
- *****************************************************************************/
-static void e1000_init_rx_addrs(struct e1000_hw *hw)
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to write
+ * @data: data to write to the PHY
+
+ * Writes a value to a PHY register
+ */
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
{
- u32 i;
- u32 rar_num;
-
- DEBUGFUNC("e1000_init_rx_addrs");
-
- /* Setup the receive address. */
- DEBUGOUT("Programming MAC Address into RAR[0]\n");
-
- e1000_rar_set(hw, hw->mac_addr, 0);
-
- rar_num = E1000_RAR_ENTRIES;
-
- /* Reserve a spot for the Locally Administered Address to work around
- * an 82571 issue in which a reset on one port will reload the MAC on
- * the other port. */
- if ((hw->mac_type == e1000_82571) && (hw->laa_is_present))
- rar_num -= 1;
- if (hw->mac_type == e1000_ich8lan)
- rar_num = E1000_RAR_ENTRIES_ICH8LAN;
-
- /* Zero out the other 15 receive addresses. */
- DEBUGOUT("Clearing RAR[1-15]\n");
- for (i = 1; i < rar_num; i++) {
- E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
- E1000_WRITE_FLUSH();
- E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
- E1000_WRITE_FLUSH();
- }
+ u32 ret_val;
+
+ DEBUGFUNC("e1000_write_phy_reg");
+
+ if ((hw->phy_type == e1000_phy_igp) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16) reg_addr);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ return ret_val;
}
-/******************************************************************************
- * Hashes an address to determine its location in the multicast table
- *
- * hw - Struct containing variables accessed by shared code
- * mc_addr - the multicast address to hash
- *****************************************************************************/
-u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
{
- u32 hash_value = 0;
-
- /* The portion of the address that is used for the hash table is
- * determined by the mc_filter_type setting.
- */
- switch (hw->mc_filter_type) {
- /* [0] [1] [2] [3] [4] [5]
- * 01 AA 00 12 34 56
- * LSB MSB
- */
- case 0:
- if (hw->mac_type == e1000_ich8lan) {
- /* [47:38] i.e. 0x158 for above example address */
- hash_value = ((mc_addr[4] >> 6) | (((u16)mc_addr[5]) << 2));
- } else {
- /* [47:36] i.e. 0x563 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
- }
- break;
- case 1:
- if (hw->mac_type == e1000_ich8lan) {
- /* [46:37] i.e. 0x2B1 for above example address */
- hash_value = ((mc_addr[4] >> 5) | (((u16)mc_addr[5]) << 3));
- } else {
- /* [46:35] i.e. 0xAC6 for above example address */
- hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
- }
- break;
- case 2:
- if (hw->mac_type == e1000_ich8lan) {
- /*[45:36] i.e. 0x163 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
- } else {
- /* [45:34] i.e. 0x5D8 for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
- }
- break;
- case 3:
- if (hw->mac_type == e1000_ich8lan) {
- /* [43:34] i.e. 0x18D for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
- } else {
- /* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
- }
- break;
- }
-
- hash_value &= 0xFFF;
- if (hw->mac_type == e1000_ich8lan)
- hash_value &= 0x3FF;
-
- return hash_value;
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = 1;
+
+ DEBUGFUNC("e1000_write_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ DEBUGOUT1("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, register address, and data intended
+ * for the PHY register in the MDI Control register. The MAC will take
+ * care of interfacing with the PHY to send the desired data.
+ */
+ mdic = (((u32) phy_data) |
+ (reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < 641; i++) {
+ udelay(5);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ DEBUGOUT("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ } else {
+ /* We'll need to use the SW defined pins to shift the write command
+ * out to the PHY. We first send a preamble to the PHY to signal the
+ * beginning of the MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the remaining required fields that will indicate a
+ * write operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine for each field in the command. The
+ * format of a MII write instruction is as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
+ */
+ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
+ (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
+ mdic <<= 16;
+ mdic |= (u32) phy_data;
+
+ e1000_shift_out_mdi_bits(hw, mdic, 32);
+ }
+
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Puts an ethernet address into a receive address register.
+/**
+ * e1000_phy_hw_reset - reset the phy, hardware style
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- * addr - Address to put into receive address register
- * index - Receive address register to write
- *****************************************************************************/
-void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+ * Returns the PHY to the power-on reset state
+ */
+s32 e1000_phy_hw_reset(struct e1000_hw *hw)
{
- u32 rar_low, rar_high;
-
- /* HW expects these in little endian so we reverse the byte order
- * from network order (big endian) to little endian
- */
- rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) |
- ((u32)addr[2] << 16) | ((u32)addr[3] << 24));
- rar_high = ((u32)addr[4] | ((u32)addr[5] << 8));
-
- /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
- * unit hang.
- *
- * Description:
- * If there are any Rx frames queued up or otherwise present in the HW
- * before RSS is enabled, and then we enable RSS, the HW Rx unit will
- * hang. To work around this issue, we have to disable receives and
- * flush out all Rx frames before we enable RSS. To do so, we modify we
- * redirect all Rx traffic to manageability and then reset the HW.
- * This flushes away Rx frames, and (since the redirections to
- * manageability persists across resets) keeps new ones from coming in
- * while we work. Then, we clear the Address Valid AV bit for all MAC
- * addresses and undo the re-direction to manageability.
- * Now, frames are coming in again, but the MAC won't accept them, so
- * far so good. We now proceed to initialize RSS (if necessary) and
- * configure the Rx unit. Last, we re-enable the AV bits and continue
- * on our merry way.
- */
- switch (hw->mac_type) {
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
- if (hw->leave_av_bit_off)
- break;
- default:
- /* Indicate to hardware the Address is Valid. */
- rar_high |= E1000_RAH_AV;
- break;
- }
-
- E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
- E1000_WRITE_FLUSH();
- E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
- E1000_WRITE_FLUSH();
+ u32 ctrl, ctrl_ext;
+ u32 led_ctrl;
+ s32 ret_val;
+
+ DEBUGFUNC("e1000_phy_hw_reset");
+
+ DEBUGOUT("Resetting Phy...\n");
+
+ if (hw->mac_type > e1000_82543) {
+ /* Read the device control register and assert the E1000_CTRL_PHY_RST
+ * bit. Then, take it out of reset.
+ * For e1000 hardware, we delay for 10ms between the assert
+ * and deassert.
+ */
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+ E1000_WRITE_FLUSH();
+
+ msleep(10);
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ } else {
+ /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
+ * bit to put the PHY into reset. Then, take it out of reset.
+ */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+ udelay(150);
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Wait for FW to finish PHY configuration. */
+ ret_val = e1000_get_phy_cfg_done(hw);
+ if (ret_val != E1000_SUCCESS)
+ return ret_val;
+
+ return ret_val;
}
-/******************************************************************************
- * Writes a value to the specified offset in the VLAN filter table.
+/**
+ * e1000_phy_reset - reset the phy to commit settings
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- * offset - Offset in VLAN filer table to write
- * value - Value to write into VLAN filter table
- *****************************************************************************/
-void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+ * Resets the PHY
+ * Sets bit 15 of the MII Control register
+ */
+s32 e1000_phy_reset(struct e1000_hw *hw)
{
- u32 temp;
-
- if (hw->mac_type == e1000_ich8lan)
- return;
-
- if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
- temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
- E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
- E1000_WRITE_FLUSH();
- E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
- E1000_WRITE_FLUSH();
- } else {
- E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
- E1000_WRITE_FLUSH();
- }
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_phy_reset");
+
+ switch (hw->phy_type) {
+ case e1000_phy_igp:
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= MII_CR_RESET;
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+ break;
+ }
+
+ if (hw->phy_type == e1000_phy_igp)
+ e1000_phy_init_script(hw);
+
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Clears the VLAN filer table
+/**
+ * e1000_detect_gig_phy - check the phy type
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void e1000_clear_vfta(struct e1000_hw *hw)
+ * Probes the expected PHY address for known PHY IDs
+ */
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
{
- u32 offset;
- u32 vfta_value = 0;
- u32 vfta_offset = 0;
- u32 vfta_bit_in_reg = 0;
-
- if (hw->mac_type == e1000_ich8lan)
- return;
-
- if (hw->mac_type == e1000_82573) {
- if (hw->mng_cookie.vlan_id != 0) {
- /* The VFTA is a 4096b bit-field, each identifying a single VLAN
- * ID. The following operations determine which 32b entry
- * (i.e. offset) into the array we want to set the VLAN ID
- * (i.e. bit) of the manageability unit. */
- vfta_offset = (hw->mng_cookie.vlan_id >>
- E1000_VFTA_ENTRY_SHIFT) &
- E1000_VFTA_ENTRY_MASK;
- vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
- E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
- }
- }
- for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
- /* If the offset we want to clear is the same offset of the
- * manageability VLAN ID, then clear all bits except that of the
- * manageability unit */
- vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
- E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
- E1000_WRITE_FLUSH();
- }
-}
+ s32 phy_init_status, ret_val;
+ u16 phy_id_high, phy_id_low;
+ bool match = false;
-static s32 e1000_id_led_init(struct e1000_hw *hw)
-{
- u32 ledctl;
- const u32 ledctl_mask = 0x000000FF;
- const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
- const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
- u16 eeprom_data, i, temp;
- const u16 led_mask = 0x0F;
-
- DEBUGFUNC("e1000_id_led_init");
-
- if (hw->mac_type < e1000_82540) {
- /* Nothing to do */
- return E1000_SUCCESS;
- }
-
- ledctl = er32(LEDCTL);
- hw->ledctl_default = ledctl;
- hw->ledctl_mode1 = hw->ledctl_default;
- hw->ledctl_mode2 = hw->ledctl_default;
-
- if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
- DEBUGOUT("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
-
- if ((hw->mac_type == e1000_82573) &&
- (eeprom_data == ID_LED_RESERVED_82573))
- eeprom_data = ID_LED_DEFAULT_82573;
- else if ((eeprom_data == ID_LED_RESERVED_0000) ||
- (eeprom_data == ID_LED_RESERVED_FFFF)) {
- if (hw->mac_type == e1000_ich8lan)
- eeprom_data = ID_LED_DEFAULT_ICH8LAN;
- else
- eeprom_data = ID_LED_DEFAULT;
- }
-
- for (i = 0; i < 4; i++) {
- temp = (eeprom_data >> (i << 2)) & led_mask;
- switch (temp) {
- case ID_LED_ON1_DEF2:
- case ID_LED_ON1_ON2:
- case ID_LED_ON1_OFF2:
- hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
- hw->ledctl_mode1 |= ledctl_on << (i << 3);
- break;
- case ID_LED_OFF1_DEF2:
- case ID_LED_OFF1_ON2:
- case ID_LED_OFF1_OFF2:
- hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
- hw->ledctl_mode1 |= ledctl_off << (i << 3);
- break;
- default:
- /* Do nothing */
- break;
- }
- switch (temp) {
- case ID_LED_DEF1_ON2:
- case ID_LED_ON1_ON2:
- case ID_LED_OFF1_ON2:
- hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
- hw->ledctl_mode2 |= ledctl_on << (i << 3);
- break;
- case ID_LED_DEF1_OFF2:
- case ID_LED_ON1_OFF2:
- case ID_LED_OFF1_OFF2:
- hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
- hw->ledctl_mode2 |= ledctl_off << (i << 3);
- break;
- default:
- /* Do nothing */
- break;
- }
- }
- return E1000_SUCCESS;
+ DEBUGFUNC("e1000_detect_gig_phy");
+
+ if (hw->phy_id != 0)
+ return E1000_SUCCESS;
+
+ /* Read the PHY ID Registers to identify which PHY is onboard. */
+ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id = (u32) (phy_id_high << 16);
+ udelay(20);
+ ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->phy_id == M88E1000_E_PHY_ID)
+ match = true;
+ break;
+ case e1000_82544:
+ if (hw->phy_id == M88E1000_I_PHY_ID)
+ match = true;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (hw->phy_id == M88E1011_I_PHY_ID)
+ match = true;
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (hw->phy_id == IGP01E1000_I_PHY_ID)
+ match = true;
+ break;
+ default:
+ DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type);
+ return -E1000_ERR_CONFIG;
+ }
+ phy_init_status = e1000_set_phy_type(hw);
+
+ if ((match) && (phy_init_status == E1000_SUCCESS)) {
+ DEBUGOUT1("PHY ID 0x%X detected\n", hw->phy_id);
+ return E1000_SUCCESS;
+ }
+ DEBUGOUT1("Invalid PHY ID 0x%X\n", hw->phy_id);
+ return -E1000_ERR_PHY;
}
-/******************************************************************************
- * Prepares SW controlable LED for use and saves the current state of the LED.
+/**
+ * e1000_phy_reset_dsp - reset DSP
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-s32 e1000_setup_led(struct e1000_hw *hw)
+ * Resets the PHY's DSP
+ */
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
{
- u32 ledctl;
- s32 ret_val = E1000_SUCCESS;
-
- DEBUGFUNC("e1000_setup_led");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- /* No setup necessary */
- break;
- case e1000_82541:
- case e1000_82547:
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- /* Turn off PHY Smart Power Down (if enabled) */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
- &hw->phy_spd_default);
- if (ret_val)
- return ret_val;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- (u16)(hw->phy_spd_default &
- ~IGP01E1000_GMII_SPD));
- if (ret_val)
- return ret_val;
- /* Fall Through */
- default:
- if (hw->media_type == e1000_media_type_fiber) {
- ledctl = er32(LEDCTL);
- /* Save current LEDCTL settings */
- hw->ledctl_default = ledctl;
- /* Turn off LED0 */
- ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
- E1000_LEDCTL_LED0_BLINK |
- E1000_LEDCTL_LED0_MODE_MASK);
- ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
- E1000_LEDCTL_LED0_MODE_SHIFT);
- ew32(LEDCTL, ledctl);
- } else if (hw->media_type == e1000_media_type_copper)
- ew32(LEDCTL, hw->ledctl_mode1);
- break;
- }
-
- return E1000_SUCCESS;
-}
+ s32 ret_val;
+ DEBUGFUNC("e1000_phy_reset_dsp");
+ do {
+ ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
+ if (ret_val)
+ break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
+ if (ret_val)
+ break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
+ if (ret_val)
+ break;
+ ret_val = E1000_SUCCESS;
+ } while (0);
-/******************************************************************************
- * Used on 82571 and later Si that has LED blink bits.
- * Callers must use their own timer and should have already called
- * e1000_id_led_init()
- * Call e1000_cleanup led() to stop blinking
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-s32 e1000_blink_led_start(struct e1000_hw *hw)
-{
- s16 i;
- u32 ledctl_blink = 0;
-
- DEBUGFUNC("e1000_id_led_blink_on");
-
- if (hw->mac_type < e1000_82571) {
- /* Nothing to do */
- return E1000_SUCCESS;
- }
- if (hw->media_type == e1000_media_type_fiber) {
- /* always blink LED0 for PCI-E fiber */
- ledctl_blink = E1000_LEDCTL_LED0_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
- } else {
- /* set the blink bit for each LED that's "on" (0x0E) in ledctl_mode2 */
- ledctl_blink = hw->ledctl_mode2;
- for (i=0; i < 4; i++)
- if (((hw->ledctl_mode2 >> (i * 8)) & 0xFF) ==
- E1000_LEDCTL_MODE_LED_ON)
- ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8));
- }
-
- ew32(LEDCTL, ledctl_blink);
-
- return E1000_SUCCESS;
+ return ret_val;
}
-/******************************************************************************
- * Restores the saved state of the SW controlable LED.
+/**
+ * e1000_phy_igp_get_info - get igp specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-s32 e1000_cleanup_led(struct e1000_hw *hw)
+ * Get PHY information from various PHY registers for igp PHY only.
+ */
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
{
- s32 ret_val = E1000_SUCCESS;
-
- DEBUGFUNC("e1000_cleanup_led");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- /* No cleanup necessary */
- break;
- case e1000_82541:
- case e1000_82547:
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- /* Turn on PHY Smart Power Down (if previously enabled) */
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- hw->phy_spd_default);
- if (ret_val)
- return ret_val;
- /* Fall Through */
- default:
- if (hw->phy_type == e1000_phy_ife) {
- e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
- break;
- }
- /* Restore LEDCTL settings */
- ew32(LEDCTL, hw->ledctl_default);
- break;
- }
-
- return E1000_SUCCESS;
+ s32 ret_val;
+ u16 phy_data, min_length, max_length, average;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_igp_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+ /* IGP01E1000 does not need to support it. */
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ /* IGP01E1000 always correct polarity reversal */
+ phy_info->polarity_correction = e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (e1000_auto_x_mode) ((phy_data & IGP01E1000_PSSR_MDIX) >>
+ IGP01E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ /* Local/Remote Receiver Information are only valid at 1000 Mbps */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ /* Get cable length */
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
+
+ /* Translate to old method */
+ average = (max_length + min_length) / 2;
+
+ if (average <= e1000_igp_cable_length_50)
+ phy_info->cable_length = e1000_cable_length_50;
+ else if (average <= e1000_igp_cable_length_80)
+ phy_info->cable_length = e1000_cable_length_50_80;
+ else if (average <= e1000_igp_cable_length_110)
+ phy_info->cable_length = e1000_cable_length_80_110;
+ else if (average <= e1000_igp_cable_length_140)
+ phy_info->cable_length = e1000_cable_length_110_140;
+ else
+ phy_info->cable_length = e1000_cable_length_140;
+ }
+
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Turns on the software controllable LED
+/**
+ * e1000_phy_m88_get_info - get m88 specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-s32 e1000_led_on(struct e1000_hw *hw)
+ * Get PHY information from various PHY registers for m88 PHY only.
+ */
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
{
- u32 ctrl = er32(CTRL);
-
- DEBUGFUNC("e1000_led_on");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- /* Set SW Defineable Pin 0 to turn on the LED */
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- break;
- case e1000_82544:
- if (hw->media_type == e1000_media_type_fiber) {
- /* Set SW Defineable Pin 0 to turn on the LED */
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- } else {
- /* Clear SW Defineable Pin 0 to turn on the LED */
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- }
- break;
- default:
- if (hw->media_type == e1000_media_type_fiber) {
- /* Clear SW Defineable Pin 0 to turn on the LED */
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- } else if (hw->phy_type == e1000_phy_ife) {
- e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
- (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
- } else if (hw->media_type == e1000_media_type_copper) {
- ew32(LEDCTL, hw->ledctl_mode2);
- return E1000_SUCCESS;
- }
- break;
- }
-
- ew32(CTRL, ctrl);
-
- return E1000_SUCCESS;
+ s32 ret_val;
+ u16 phy_data;
+ e1000_rev_polarity polarity;
+
+ DEBUGFUNC("e1000_phy_m88_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->extended_10bt_distance =
+ ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
+ M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
+ e1000_10bt_ext_dist_enable_lower :
+ e1000_10bt_ext_dist_enable_normal;
+
+ phy_info->polarity_correction =
+ ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
+ M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
+ e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (e1000_auto_x_mode) ((phy_data & M88E1000_PSSR_MDIX) >>
+ M88E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ /* Cable Length Estimation and Local/Remote Receiver Information
+ * are only valid at 1000 Mbps.
+ */
+ phy_info->cable_length =
+ (e1000_cable_length) ((phy_data &
+ M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ }
+
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Turns off the software controllable LED
+/**
+ * e1000_phy_get_info - request phy info
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
*
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-s32 e1000_led_off(struct e1000_hw *hw)
+ * Get PHY information from various PHY registers
+ */
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
{
- u32 ctrl = er32(CTRL);
-
- DEBUGFUNC("e1000_led_off");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- /* Clear SW Defineable Pin 0 to turn off the LED */
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- break;
- case e1000_82544:
- if (hw->media_type == e1000_media_type_fiber) {
- /* Clear SW Defineable Pin 0 to turn off the LED */
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- } else {
- /* Set SW Defineable Pin 0 to turn off the LED */
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- }
- break;
- default:
- if (hw->media_type == e1000_media_type_fiber) {
- /* Set SW Defineable Pin 0 to turn off the LED */
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- } else if (hw->phy_type == e1000_phy_ife) {
- e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED,
- (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF));
- } else if (hw->media_type == e1000_media_type_copper) {
- ew32(LEDCTL, hw->ledctl_mode1);
- return E1000_SUCCESS;
- }
- break;
- }
-
- ew32(CTRL, ctrl);
-
- return E1000_SUCCESS;
-}
+ s32 ret_val;
+ u16 phy_data;
-/******************************************************************************
- * Clears all hardware statistics counters.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
+ DEBUGFUNC("e1000_phy_get_info");
+
+ phy_info->cable_length = e1000_cable_length_undefined;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
+ phy_info->cable_polarity = e1000_rev_polarity_undefined;
+ phy_info->downshift = e1000_downshift_undefined;
+ phy_info->polarity_correction = e1000_polarity_reversal_undefined;
+ phy_info->mdix_mode = e1000_auto_x_mode_undefined;
+ phy_info->local_rx = e1000_1000t_rx_status_undefined;
+ phy_info->remote_rx = e1000_1000t_rx_status_undefined;
+
+ if (hw->media_type != e1000_media_type_copper) {
+ DEBUGOUT("PHY info is only valid for copper media\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
+ DEBUGOUT("PHY info is only valid if link is up\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ if (hw->phy_type == e1000_phy_igp)
+ return e1000_phy_igp_get_info(hw, phy_info);
+ else
+ return e1000_phy_m88_get_info(hw, phy_info);
+}
+
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
{
- volatile u32 temp;
-
- temp = er32(CRCERRS);
- temp = er32(SYMERRS);
- temp = er32(MPC);
- temp = er32(SCC);
- temp = er32(ECOL);
- temp = er32(MCC);
- temp = er32(LATECOL);
- temp = er32(COLC);
- temp = er32(DC);
- temp = er32(SEC);
- temp = er32(RLEC);
- temp = er32(XONRXC);
- temp = er32(XONTXC);
- temp = er32(XOFFRXC);
- temp = er32(XOFFTXC);
- temp = er32(FCRUC);
-
- if (hw->mac_type != e1000_ich8lan) {
- temp = er32(PRC64);
- temp = er32(PRC127);
- temp = er32(PRC255);
- temp = er32(PRC511);
- temp = er32(PRC1023);
- temp = er32(PRC1522);
- }
-
- temp = er32(GPRC);
- temp = er32(BPRC);
- temp = er32(MPRC);
- temp = er32(GPTC);
- temp = er32(GORCL);
- temp = er32(GORCH);
- temp = er32(GOTCL);
- temp = er32(GOTCH);
- temp = er32(RNBC);
- temp = er32(RUC);
- temp = er32(RFC);
- temp = er32(ROC);
- temp = er32(RJC);
- temp = er32(TORL);
- temp = er32(TORH);
- temp = er32(TOTL);
- temp = er32(TOTH);
- temp = er32(TPR);
- temp = er32(TPT);
-
- if (hw->mac_type != e1000_ich8lan) {
- temp = er32(PTC64);
- temp = er32(PTC127);
- temp = er32(PTC255);
- temp = er32(PTC511);
- temp = er32(PTC1023);
- temp = er32(PTC1522);
- }
-
- temp = er32(MPTC);
- temp = er32(BPTC);
-
- if (hw->mac_type < e1000_82543) return;
-
- temp = er32(ALGNERRC);
- temp = er32(RXERRC);
- temp = er32(TNCRS);
- temp = er32(CEXTERR);
- temp = er32(TSCTC);
- temp = er32(TSCTFC);
-
- if (hw->mac_type <= e1000_82544) return;
-
- temp = er32(MGTPRC);
- temp = er32(MGTPDC);
- temp = er32(MGTPTC);
-
- if (hw->mac_type <= e1000_82547_rev_2) return;
-
- temp = er32(IAC);
- temp = er32(ICRXOC);
-
- if (hw->mac_type == e1000_ich8lan) return;
-
- temp = er32(ICRXPTC);
- temp = er32(ICRXATC);
- temp = er32(ICTXPTC);
- temp = er32(ICTXATC);
- temp = er32(ICTXQEC);
- temp = er32(ICTXQMTC);
- temp = er32(ICRXDMTC);
+ DEBUGFUNC("e1000_validate_mdi_settings");
+
+ if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
+ DEBUGOUT("Invalid MDI setting detected\n");
+ hw->mdix = 1;
+ return -E1000_ERR_CONFIG;
+ }
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Resets Adaptive IFS to its default state.
+/**
+ * e1000_init_eeprom_params - initialize sw eeprom vars
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- *
- * Call this after e1000_init_hw. You may override the IFS defaults by setting
- * hw->ifs_params_forced to true. However, you must initialize hw->
- * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
- * before calling this function.
- *****************************************************************************/
-void e1000_reset_adaptive(struct e1000_hw *hw)
+ * Sets up eeprom variables in the hw struct. Must be called after mac_type
+ * is configured.
+ */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw)
{
- DEBUGFUNC("e1000_reset_adaptive");
-
- if (hw->adaptive_ifs) {
- if (!hw->ifs_params_forced) {
- hw->current_ifs_val = 0;
- hw->ifs_min_val = IFS_MIN;
- hw->ifs_max_val = IFS_MAX;
- hw->ifs_step_size = IFS_STEP;
- hw->ifs_ratio = IFS_RATIO;
- }
- hw->in_ifs_mode = false;
- ew32(AIT, 0);
- } else {
- DEBUGOUT("Not in Adaptive IFS mode!\n");
- }
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd = er32(EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 eeprom_size;
+
+ DEBUGFUNC("e1000_init_eeprom_params");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->word_size = 64;
+ eeprom->opcode_bits = 3;
+ eeprom->address_bits = 6;
+ eeprom->delay_usec = 50;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_SIZE) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (eecd & E1000_EECD_TYPE) {
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ } else {
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (eeprom->type == e1000_eeprom_spi) {
+ /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
+ * 32KB (incremented by powers of 2).
+ */
+ /* Set to default value for initial eeprom read. */
+ eeprom->word_size = 64;
+ ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
+ if (ret_val)
+ return ret_val;
+ eeprom_size =
+ (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
+ /* 256B eeprom size was not supported in earlier hardware, so we
+ * bump eeprom_size up one to ensure that "1" (which maps to 256B)
+ * is never the result used in the shifting logic below. */
+ if (eeprom_size)
+ eeprom_size++;
+
+ eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
+ }
+ return ret_val;
}
-/******************************************************************************
- * Called during the callback/watchdog routine to update IFS value based on
- * the ratio of transmits to collisions.
- *
- * hw - Struct containing variables accessed by shared code
- * tx_packets - Number of transmits since last callback
- * total_collisions - Number of collisions since last callback
- *****************************************************************************/
-void e1000_update_adaptive(struct e1000_hw *hw)
+/**
+ * e1000_raise_ee_clk - Raises the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
{
- DEBUGFUNC("e1000_update_adaptive");
-
- if (hw->adaptive_ifs) {
- if ((hw->collision_delta * hw->ifs_ratio) > hw->tx_packet_delta) {
- if (hw->tx_packet_delta > MIN_NUM_XMITS) {
- hw->in_ifs_mode = true;
- if (hw->current_ifs_val < hw->ifs_max_val) {
- if (hw->current_ifs_val == 0)
- hw->current_ifs_val = hw->ifs_min_val;
- else
- hw->current_ifs_val += hw->ifs_step_size;
- ew32(AIT, hw->current_ifs_val);
- }
- }
- } else {
- if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
- hw->current_ifs_val = 0;
- hw->in_ifs_mode = false;
- ew32(AIT, 0);
- }
- }
- } else {
- DEBUGOUT("Not in Adaptive IFS mode!\n");
- }
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait <delay> microseconds.
+ */
+ *eecd = *eecd | E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
}
-/******************************************************************************
- * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
- *
- * hw - Struct containing variables accessed by shared code
- * frame_len - The length of the frame in question
- * mac_addr - The Ethernet destination address of the frame in question
- *****************************************************************************/
-void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
- u32 frame_len, u8 *mac_addr)
+/**
+ * e1000_lower_ee_clk - Lowers the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
{
- u64 carry_bit;
-
- /* First adjust the frame length. */
- frame_len--;
- /* We need to adjust the statistics counters, since the hardware
- * counters overcount this packet as a CRC error and undercount
- * the packet as a good packet
- */
- /* This packet should not be counted as a CRC error. */
- stats->crcerrs--;
- /* This packet does count as a Good Packet Received. */
- stats->gprc++;
-
- /* Adjust the Good Octets received counters */
- carry_bit = 0x80000000 & stats->gorcl;
- stats->gorcl += frame_len;
- /* If the high bit of Gorcl (the low 32 bits of the Good Octets
- * Received Count) was one before the addition,
- * AND it is zero after, then we lost the carry out,
- * need to add one to Gorch (Good Octets Received Count High).
- * This could be simplified if all environments supported
- * 64-bit integers.
- */
- if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
- stats->gorch++;
- /* Is this a broadcast or multicast? Check broadcast first,
- * since the test for a multicast frame will test positive on
- * a broadcast frame.
- */
- if ((mac_addr[0] == (u8)0xff) && (mac_addr[1] == (u8)0xff))
- /* Broadcast packet */
- stats->bprc++;
- else if (*mac_addr & 0x01)
- /* Multicast packet */
- stats->mprc++;
-
- if (frame_len == hw->max_frame_size) {
- /* In this case, the hardware has overcounted the number of
- * oversize frames.
- */
- if (stats->roc > 0)
- stats->roc--;
- }
-
- /* Adjust the bin counters when the extra byte put the frame in the
- * wrong bin. Remember that the frame_len was adjusted above.
- */
- if (frame_len == 64) {
- stats->prc64++;
- stats->prc127--;
- } else if (frame_len == 127) {
- stats->prc127++;
- stats->prc255--;
- } else if (frame_len == 255) {
- stats->prc255++;
- stats->prc511--;
- } else if (frame_len == 511) {
- stats->prc511++;
- stats->prc1023--;
- } else if (frame_len == 1023) {
- stats->prc1023++;
- stats->prc1522--;
- } else if (frame_len == 1522) {
- stats->prc1522++;
- }
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd = *eecd & ~E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
}
-/******************************************************************************
- * Gets the current PCI bus type, speed, and width of the hardware
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-void e1000_get_bus_info(struct e1000_hw *hw)
+/**
+ * e1000_shift_out_ee_bits - Shift data bits out to the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ */
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
{
- s32 ret_val;
- u16 pci_ex_link_status;
- u32 status;
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- hw->bus_type = e1000_bus_type_pci;
- hw->bus_speed = e1000_bus_speed_unknown;
- hw->bus_width = e1000_bus_width_unknown;
- break;
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- case e1000_80003es2lan:
- hw->bus_type = e1000_bus_type_pci_express;
- hw->bus_speed = e1000_bus_speed_2500;
- ret_val = e1000_read_pcie_cap_reg(hw,
- PCI_EX_LINK_STATUS,
- &pci_ex_link_status);
- if (ret_val)
- hw->bus_width = e1000_bus_width_unknown;
- else
- hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >>
- PCI_EX_LINK_WIDTH_SHIFT;
- break;
- case e1000_ich8lan:
- hw->bus_type = e1000_bus_type_pci_express;
- hw->bus_speed = e1000_bus_speed_2500;
- hw->bus_width = e1000_bus_width_pciex_1;
- break;
- default:
- status = er32(STATUS);
- hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
- e1000_bus_type_pcix : e1000_bus_type_pci;
-
- if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
- hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
- e1000_bus_speed_66 : e1000_bus_speed_120;
- } else if (hw->bus_type == e1000_bus_type_pci) {
- hw->bus_speed = (status & E1000_STATUS_PCI66) ?
- e1000_bus_speed_66 : e1000_bus_speed_33;
- } else {
- switch (status & E1000_STATUS_PCIX_SPEED) {
- case E1000_STATUS_PCIX_SPEED_66:
- hw->bus_speed = e1000_bus_speed_66;
- break;
- case E1000_STATUS_PCIX_SPEED_100:
- hw->bus_speed = e1000_bus_speed_100;
- break;
- case E1000_STATUS_PCIX_SPEED_133:
- hw->bus_speed = e1000_bus_speed_133;
- break;
- default:
- hw->bus_speed = e1000_bus_speed_reserved;
- break;
- }
- }
- hw->bus_width = (status & E1000_STATUS_BUS64) ?
- e1000_bus_width_64 : e1000_bus_width_32;
- break;
- }
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u32 mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd = er32(EECD);
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~E1000_EECD_DO;
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_DO;
+ }
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+
+ udelay(eeprom->delay_usec);
+
+ e1000_raise_ee_clk(hw, &eecd);
+ e1000_lower_ee_clk(hw, &eecd);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd &= ~E1000_EECD_DI;
+ ew32(EECD, eecd);
}
-/******************************************************************************
- * Writes a value to one of the devices registers using port I/O (as opposed to
- * memory mapped I/O). Only 82544 and newer devices support port I/O.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset to write to
- * value - value to write
- *****************************************************************************/
-static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
+/**
+ * e1000_shift_in_ee_bits - Shift data bits in from the EEPROM
+ * @hw: Struct containing variables accessed by shared code
+ * @count: number of bits to shift in
+ */
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
{
- unsigned long io_addr = hw->io_base;
- unsigned long io_data = hw->io_base + 4;
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ /* In order to read a register from the EEPROM, we need to shift 'count'
+ * bits in from the EEPROM. Bits are "shifted in" by raising the clock
+ * input to the EEPROM (setting the SK bit), and then reading the value of
+ * the "DO" bit. During this "shifting in" process the "DI" bit should
+ * always be clear.
+ */
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
- e1000_io_write(hw, io_addr, offset);
- e1000_io_write(hw, io_data, value);
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ e1000_raise_ee_clk(hw, &eecd);
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DI);
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_ee_clk(hw, &eecd);
+ }
+
+ return data;
}
-/******************************************************************************
- * Estimates the cable length.
- *
- * hw - Struct containing variables accessed by shared code
- * min_length - The estimated minimum length
- * max_length - The estimated maximum length
- *
- * returns: - E1000_ERR_XXX
- * E1000_SUCCESS
+/**
+ * e1000_acquire_eeprom - Prepares EEPROM for access
+ * @hw: Struct containing variables accessed by shared code
*
- * This function always returns a ranged length (minimum & maximum).
- * So for M88 phy's, this function interprets the one value returned from the
- * register to the minimum and maximum range.
- * For IGP phy's, the function calculates the range by the AGC registers.
- *****************************************************************************/
-static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
- u16 *max_length)
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ */
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
{
- s32 ret_val;
- u16 agc_value = 0;
- u16 i, phy_data;
- u16 cable_length;
-
- DEBUGFUNC("e1000_get_cable_length");
-
- *min_length = *max_length = 0;
-
- /* Use old method for Phy older than IGP */
- if (hw->phy_type == e1000_phy_m88) {
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
- cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
-
- /* Convert the enum value to ranged values */
- switch (cable_length) {
- case e1000_cable_length_50:
- *min_length = 0;
- *max_length = e1000_igp_cable_length_50;
- break;
- case e1000_cable_length_50_80:
- *min_length = e1000_igp_cable_length_50;
- *max_length = e1000_igp_cable_length_80;
- break;
- case e1000_cable_length_80_110:
- *min_length = e1000_igp_cable_length_80;
- *max_length = e1000_igp_cable_length_110;
- break;
- case e1000_cable_length_110_140:
- *min_length = e1000_igp_cable_length_110;
- *max_length = e1000_igp_cable_length_140;
- break;
- case e1000_cable_length_140:
- *min_length = e1000_igp_cable_length_140;
- *max_length = e1000_igp_cable_length_170;
- break;
- default:
- return -E1000_ERR_PHY;
- break;
- }
- } else if (hw->phy_type == e1000_phy_gg82563) {
- ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE,
- &phy_data);
- if (ret_val)
- return ret_val;
- cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH;
-
- switch (cable_length) {
- case e1000_gg_cable_length_60:
- *min_length = 0;
- *max_length = e1000_igp_cable_length_60;
- break;
- case e1000_gg_cable_length_60_115:
- *min_length = e1000_igp_cable_length_60;
- *max_length = e1000_igp_cable_length_115;
- break;
- case e1000_gg_cable_length_115_150:
- *min_length = e1000_igp_cable_length_115;
- *max_length = e1000_igp_cable_length_150;
- break;
- case e1000_gg_cable_length_150:
- *min_length = e1000_igp_cable_length_150;
- *max_length = e1000_igp_cable_length_180;
- break;
- default:
- return -E1000_ERR_PHY;
- break;
- }
- } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
- u16 cur_agc_value;
- u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
- u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
- {IGP01E1000_PHY_AGC_A,
- IGP01E1000_PHY_AGC_B,
- IGP01E1000_PHY_AGC_C,
- IGP01E1000_PHY_AGC_D};
- /* Read the AGC registers for all channels */
- for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
-
- ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
- if (ret_val)
- return ret_val;
-
- cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
-
- /* Value bound check. */
- if ((cur_agc_value >= IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1) ||
- (cur_agc_value == 0))
- return -E1000_ERR_PHY;
-
- agc_value += cur_agc_value;
-
- /* Update minimal AGC value. */
- if (min_agc_value > cur_agc_value)
- min_agc_value = cur_agc_value;
- }
-
- /* Remove the minimal AGC result for length < 50m */
- if (agc_value < IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
- agc_value -= min_agc_value;
-
- /* Get the average length of the remaining 3 channels */
- agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
- } else {
- /* Get the average length of all the 4 channels. */
- agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
- }
-
- /* Set the range of the calculated length. */
- *min_length = ((e1000_igp_cable_length_table[agc_value] -
- IGP01E1000_AGC_RANGE) > 0) ?
- (e1000_igp_cable_length_table[agc_value] -
- IGP01E1000_AGC_RANGE) : 0;
- *max_length = e1000_igp_cable_length_table[agc_value] +
- IGP01E1000_AGC_RANGE;
- } else if (hw->phy_type == e1000_phy_igp_2 ||
- hw->phy_type == e1000_phy_igp_3) {
- u16 cur_agc_index, max_agc_index = 0;
- u16 min_agc_index = IGP02E1000_AGC_LENGTH_TABLE_SIZE - 1;
- u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] =
- {IGP02E1000_PHY_AGC_A,
- IGP02E1000_PHY_AGC_B,
- IGP02E1000_PHY_AGC_C,
- IGP02E1000_PHY_AGC_D};
- /* Read the AGC registers for all channels */
- for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
- ret_val = e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
- if (ret_val)
- return ret_val;
-
- /* Getting bits 15:9, which represent the combination of course and
- * fine gain values. The result is a number that can be put into
- * the lookup table to obtain the approximate cable length. */
- cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
- IGP02E1000_AGC_LENGTH_MASK;
-
- /* Array index bound check. */
- if ((cur_agc_index >= IGP02E1000_AGC_LENGTH_TABLE_SIZE) ||
- (cur_agc_index == 0))
- return -E1000_ERR_PHY;
-
- /* Remove min & max AGC values from calculation. */
- if (e1000_igp_2_cable_length_table[min_agc_index] >
- e1000_igp_2_cable_length_table[cur_agc_index])
- min_agc_index = cur_agc_index;
- if (e1000_igp_2_cable_length_table[max_agc_index] <
- e1000_igp_2_cable_length_table[cur_agc_index])
- max_agc_index = cur_agc_index;
-
- agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
- }
-
- agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
- e1000_igp_2_cable_length_table[max_agc_index]);
- agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
-
- /* Calculate cable length with the error range of +/- 10 meters. */
- *min_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
- (agc_value - IGP02E1000_AGC_RANGE) : 0;
- *max_length = agc_value + IGP02E1000_AGC_RANGE;
- }
-
- return E1000_SUCCESS;
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd, i = 0;
+
+ DEBUGFUNC("e1000_acquire_eeprom");
+
+ eecd = er32(EECD);
+
+ /* Request EEPROM Access */
+ if (hw->mac_type > e1000_82544) {
+ eecd |= E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ eecd = er32(EECD);
+ while ((!(eecd & E1000_EECD_GNT)) &&
+ (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
+ i++;
+ udelay(5);
+ eecd = er32(EECD);
+ }
+ if (!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ DEBUGOUT("Could not acquire EEPROM grant\n");
+ return -E1000_ERR_EEPROM;
+ }
+ }
+
+ /* Setup EEPROM for Read/Write */
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ /* Clear SK and DI */
+ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+ ew32(EECD, eecd);
+
+ /* Set CS */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ udelay(1);
+ }
+
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Check the cable polarity
- *
- * hw - Struct containing variables accessed by shared code
- * polarity - output parameter : 0 - Polarity is not reversed
- * 1 - Polarity is reversed.
- *
- * returns: - E1000_ERR_XXX
- * E1000_SUCCESS
- *
- * For phy's older than IGP, this function simply reads the polarity bit in the
- * Phy Status register. For IGP phy's, this bit is valid only if link speed is
- * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
- * return 0. If the link speed is 1000 Mbps the polarity status is in the
- * IGP01E1000_PHY_PCS_INIT_REG.
- *****************************************************************************/
-static s32 e1000_check_polarity(struct e1000_hw *hw,
- e1000_rev_polarity *polarity)
+/**
+ * e1000_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_standby_eeprom(struct e1000_hw *hw)
{
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_check_polarity");
-
- if ((hw->phy_type == e1000_phy_m88) ||
- (hw->phy_type == e1000_phy_gg82563)) {
- /* return the Polarity bit in the Status register. */
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
- *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
- M88E1000_PSSR_REV_POLARITY_SHIFT) ?
- e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
-
- } else if (hw->phy_type == e1000_phy_igp ||
- hw->phy_type == e1000_phy_igp_3 ||
- hw->phy_type == e1000_phy_igp_2) {
- /* Read the Status register to check the speed */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
- * find the polarity status */
- if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS) {
-
- /* Read the GIG initialization PCS register (0x00B4) */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- /* Check the polarity bits */
- *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
- e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
- } else {
- /* For 10 Mbps, read the polarity bit in the status register. (for
- * 100 Mbps this bit is always 0) */
- *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
- e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
- }
- } else if (hw->phy_type == e1000_phy_ife) {
- ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL,
- &phy_data);
- if (ret_val)
- return ret_val;
- *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >>
- IFE_PESC_POLARITY_REVERSED_SHIFT) ?
- e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
- }
- return E1000_SUCCESS;
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+
+ eecd = er32(EECD);
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock high */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Select EEPROM */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock low */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ }
}
-/******************************************************************************
- * Check if Downshift occured
+/**
+ * e1000_release_eeprom - drop chip select
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - Struct containing variables accessed by shared code
- * downshift - output parameter : 0 - No Downshift ocured.
- * 1 - Downshift ocured.
- *
- * returns: - E1000_ERR_XXX
- * E1000_SUCCESS
- *
- * For phy's older than IGP, this function reads the Downshift bit in the Phy
- * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
- * Link Health register. In IGP this bit is latched high, so the driver must
- * read it immediately after link is established.
- *****************************************************************************/
-static s32 e1000_check_downshift(struct e1000_hw *hw)
+ * Terminates a command by inverting the EEPROM's chip select pin
+ */
+static void e1000_release_eeprom(struct e1000_hw *hw)
{
- s32 ret_val;
- u16 phy_data;
-
- DEBUGFUNC("e1000_check_downshift");
-
- if (hw->phy_type == e1000_phy_igp ||
- hw->phy_type == e1000_phy_igp_3 ||
- hw->phy_type == e1000_phy_igp_2) {
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- hw->speed_downgraded = (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
- } else if ((hw->phy_type == e1000_phy_m88) ||
- (hw->phy_type == e1000_phy_gg82563)) {
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
- M88E1000_PSSR_DOWNSHIFT_SHIFT;
- } else if (hw->phy_type == e1000_phy_ife) {
- /* e1000_phy_ife supports 10/100 speed only */
- hw->speed_downgraded = false;
- }
-
- return E1000_SUCCESS;
+ u32 eecd;
+
+ DEBUGFUNC("e1000_release_eeprom");
+
+ eecd = er32(EECD);
+
+ if (hw->eeprom.type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_CS; /* Pull CS high */
+ eecd &= ~E1000_EECD_SK; /* Lower SCK */
+
+ ew32(EECD, eecd);
+
+ udelay(hw->eeprom.delay_usec);
+ } else if (hw->eeprom.type == e1000_eeprom_microwire) {
+ /* cleanup eeprom */
+
+ /* CS on Microwire is active-high */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+
+ ew32(EECD, eecd);
+
+ /* Rising edge of clock */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+
+ /* Falling edge of clock */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+ }
+
+ /* Stop requesting EEPROM access */
+ if (hw->mac_type > e1000_82544) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ }
}
-/*****************************************************************************
- *
- * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
- * gigabit link is achieved to improve link quality.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - E1000_ERR_PHY if fail to read/write the PHY
- * E1000_SUCCESS at any other case.
- *
- ****************************************************************************/
+/**
+ * e1000_spi_eeprom_ready - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
+{
+ u16 retry_count = 0;
+ u8 spi_stat_reg;
-static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
+ DEBUGFUNC("e1000_spi_eeprom_ready");
+
+ /* Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ retry_count = 0;
+ do {
+ e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
+ hw->eeprom.opcode_bits);
+ spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8);
+ if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ retry_count += 5;
+
+ e1000_standby_eeprom(hw);
+ } while (retry_count < EEPROM_MAX_RETRY_SPI);
+
+ /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
+ * only 0-5mSec on 5V devices)
+ */
+ if (retry_count >= EEPROM_MAX_RETRY_SPI) {
+ DEBUGOUT("SPI EEPROM Status error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_read_eeprom - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ * @words: number of words to read
+ */
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
{
- s32 ret_val;
- u16 phy_data, phy_saved_data, speed, duplex, i;
- u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
- {IGP01E1000_PHY_AGC_PARAM_A,
- IGP01E1000_PHY_AGC_PARAM_B,
- IGP01E1000_PHY_AGC_PARAM_C,
- IGP01E1000_PHY_AGC_PARAM_D};
- u16 min_length, max_length;
-
- DEBUGFUNC("e1000_config_dsp_after_link_change");
-
- if (hw->phy_type != e1000_phy_igp)
- return E1000_SUCCESS;
-
- if (link_up) {
- ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
- if (ret_val) {
- DEBUGOUT("Error getting link speed and duplex\n");
- return ret_val;
- }
-
- if (speed == SPEED_1000) {
-
- ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
- if (ret_val)
- return ret_val;
-
- if ((hw->dsp_config_state == e1000_dsp_config_enabled) &&
- min_length >= e1000_igp_cable_length_50) {
-
- for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
- ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i],
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
-
- ret_val = e1000_write_phy_reg(hw, dsp_reg_array[i],
- phy_data);
- if (ret_val)
- return ret_val;
- }
- hw->dsp_config_state = e1000_dsp_config_activated;
- }
-
- if ((hw->ffe_config_state == e1000_ffe_config_enabled) &&
- (min_length < e1000_igp_cable_length_50)) {
-
- u16 ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_20;
- u32 idle_errs = 0;
-
- /* clear previous idle error counts */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- for (i = 0; i < ffe_idle_err_timeout; i++) {
- udelay(1000);
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- idle_errs += (phy_data & SR_1000T_IDLE_ERROR_CNT);
- if (idle_errs > SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT) {
- hw->ffe_config_state = e1000_ffe_config_active;
-
- ret_val = e1000_write_phy_reg(hw,
- IGP01E1000_PHY_DSP_FFE,
- IGP01E1000_PHY_DSP_FFE_CM_CP);
- if (ret_val)
- return ret_val;
- break;
- }
-
- if (idle_errs)
- ffe_idle_err_timeout = FFE_IDLE_ERR_COUNT_TIMEOUT_100;
- }
- }
- }
- } else {
- if (hw->dsp_config_state == e1000_dsp_config_activated) {
- /* Save off the current value of register 0x2F5B to be restored at
- * the end of the routines. */
- ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
- if (ret_val)
- return ret_val;
-
- /* Disable the PHY transmitter */
- ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
-
- if (ret_val)
- return ret_val;
-
- mdelay(20);
-
- ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_FORCE_GIGA);
- if (ret_val)
- return ret_val;
- for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
- ret_val = e1000_read_phy_reg(hw, dsp_reg_array[i], &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
- phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
-
- ret_val = e1000_write_phy_reg(hw,dsp_reg_array[i], phy_data);
- if (ret_val)
- return ret_val;
- }
-
- ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_RESTART_AUTONEG);
- if (ret_val)
- return ret_val;
-
- mdelay(20);
-
- /* Now enable the transmitter */
- ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
- if (ret_val)
- return ret_val;
-
- hw->dsp_config_state = e1000_dsp_config_enabled;
- }
-
- if (hw->ffe_config_state == e1000_ffe_config_active) {
- /* Save off the current value of register 0x2F5B to be restored at
- * the end of the routines. */
- ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
- if (ret_val)
- return ret_val;
-
- /* Disable the PHY transmitter */
- ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
-
- if (ret_val)
- return ret_val;
-
- mdelay(20);
-
- ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_FORCE_GIGA);
- if (ret_val)
- return ret_val;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
- IGP01E1000_PHY_DSP_FFE_DEFAULT);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_RESTART_AUTONEG);
- if (ret_val)
- return ret_val;
-
- mdelay(20);
-
- /* Now enable the transmitter */
- ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
- if (ret_val)
- return ret_val;
-
- hw->ffe_config_state = e1000_ffe_config_enabled;
- }
- }
- return E1000_SUCCESS;
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
}
-/*****************************************************************************
- * Set PHY to class A mode
- * Assumes the following operations will follow to enable the new class mode.
- * 1. Do a PHY soft reset
- * 2. Restart auto-negotiation or force link.
- *
- * hw - Struct containing variables accessed by shared code
- ****************************************************************************/
-static s32 e1000_set_phy_mode(struct e1000_hw *hw)
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
- s32 ret_val;
- u16 eeprom_data;
-
- DEBUGFUNC("e1000_set_phy_mode");
-
- if ((hw->mac_type == e1000_82545_rev_3) &&
- (hw->media_type == e1000_media_type_copper)) {
- ret_val = e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1, &eeprom_data);
- if (ret_val) {
- return ret_val;
- }
-
- if ((eeprom_data != EEPROM_RESERVED_WORD) &&
- (eeprom_data & EEPROM_PHY_CLASS_A)) {
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x000B);
- if (ret_val)
- return ret_val;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x8104);
- if (ret_val)
- return ret_val;
-
- hw->phy_reset_disable = false;
- }
- }
-
- return E1000_SUCCESS;
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 i = 0;
+
+ DEBUGFUNC("e1000_read_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size)
+ || (words > eeprom->word_size - offset) || (words == 0)) {
+ DEBUGOUT2
+ ("\"words\" parameter out of bounds. Words = %d, size = %d\n",
+ offset, eeprom->word_size);
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
+ * directly. In this case, we need to acquire the EEPROM so that
+ * FW or other port software does not interrupt.
+ */
+ /* Prepare the EEPROM for bit-bang reading */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
+ * acquired the EEPROM at this point, so any returns should release it */
+ if (eeprom->type == e1000_eeprom_spi) {
+ u16 word_in;
+ u8 read_opcode = EEPROM_READ_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw)) {
+ e1000_release_eeprom(hw);
+ return -E1000_ERR_EEPROM;
+ }
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ read_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16) (offset * 2),
+ eeprom->address_bits);
+
+ /* Read the data. The address of the eeprom internally increments with
+ * each byte (spi) being read, saving on the overhead of eeprom setup
+ * and tear-down. The address counter will roll over if reading beyond
+ * the size of the eeprom, thus allowing the entire memory to be read
+ * starting from any offset. */
+ for (i = 0; i < words; i++) {
+ word_in = e1000_shift_in_ee_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+ } else if (eeprom->type == e1000_eeprom_microwire) {
+ for (i = 0; i < words; i++) {
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw,
+ EEPROM_READ_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16) (offset + i),
+ eeprom->address_bits);
+
+ /* Read the data. For microwire, each word requires the overhead
+ * of eeprom setup and tear-down. */
+ data[i] = e1000_shift_in_ee_bits(hw, 16);
+ e1000_standby_eeprom(hw);
+ }
+ }
+
+ /* End this read operation */
+ e1000_release_eeprom(hw);
+
+ return E1000_SUCCESS;
}
-/*****************************************************************************
+/**
+ * e1000_validate_eeprom_checksum - Verifies that the EEPROM has a valid checksum
+ * @hw: Struct containing variables accessed by shared code
*
- * This function sets the lplu state according to the active flag. When
- * activating lplu this function also disables smart speed and vise versa.
- * lplu will not be activated unless the device autonegotiation advertisment
- * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
- * hw: Struct containing variables accessed by shared code
- * active - true to enable lplu false to disable lplu.
- *
- * returns: - E1000_ERR_PHY if fail to read/write the PHY
- * E1000_SUCCESS at any other case.
- *
- ****************************************************************************/
-
-static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ */
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
{
- u32 phy_ctrl = 0;
- s32 ret_val;
- u16 phy_data;
- DEBUGFUNC("e1000_set_d3_lplu_state");
-
- if (hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2
- && hw->phy_type != e1000_phy_igp_3)
- return E1000_SUCCESS;
-
- /* During driver activity LPLU should not be used or it will attain link
- * from the lowest speeds starting from 10Mbps. The capability is used for
- * Dx transitions and states */
- if (hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) {
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
- if (ret_val)
- return ret_val;
- } else if (hw->mac_type == e1000_ich8lan) {
- /* MAC writes into PHY register based on the state transition
- * and start auto-negotiation. SW driver can overwrite the settings
- * in CSR PHY power control E1000_PHY_CTRL register. */
- phy_ctrl = er32(PHY_CTRL);
- } else {
- ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
- if (ret_val)
- return ret_val;
- }
-
- if (!active) {
- if (hw->mac_type == e1000_82541_rev_2 ||
- hw->mac_type == e1000_82547_rev_2) {
- phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
- if (ret_val)
- return ret_val;
- } else {
- if (hw->mac_type == e1000_ich8lan) {
- phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
- ew32(PHY_CTRL, phy_ctrl);
- } else {
- phy_data &= ~IGP02E1000_PM_D3_LPLU;
- ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
- phy_data);
- if (ret_val)
- return ret_val;
- }
- }
-
- /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
- * Dx states where the power conservation is most important. During
- * driver activity we should enable SmartSpeed, so performance is
- * maintained. */
- if (hw->smart_speed == e1000_smart_speed_on) {
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
- } else if (hw->smart_speed == e1000_smart_speed_off) {
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
- }
-
- } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT) ||
- (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) ||
- (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) {
-
- if (hw->mac_type == e1000_82541_rev_2 ||
- hw->mac_type == e1000_82547_rev_2) {
- phy_data |= IGP01E1000_GMII_FLEX_SPD;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data);
- if (ret_val)
- return ret_val;
- } else {
- if (hw->mac_type == e1000_ich8lan) {
- phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
- ew32(PHY_CTRL, phy_ctrl);
- } else {
- phy_data |= IGP02E1000_PM_D3_LPLU;
- ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
- phy_data);
- if (ret_val)
- return ret_val;
- }
- }
-
- /* When LPLU is enabled we should disable SmartSpeed */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
- if (ret_val)
- return ret_val;
-
- }
- return E1000_SUCCESS;
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_validate_eeprom_checksum");
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+
+ if (checksum == (u16) EEPROM_SUM)
+ return E1000_SUCCESS;
+ else {
+ DEBUGOUT("EEPROM Checksum Invalid\n");
+ return -E1000_ERR_EEPROM;
+ }
}
-/*****************************************************************************
- *
- * This function sets the lplu d0 state according to the active flag. When
- * activating lplu this function also disables smart speed and vise versa.
- * lplu will not be activated unless the device autonegotiation advertisment
- * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
- * hw: Struct containing variables accessed by shared code
- * active - true to enable lplu false to disable lplu.
+/**
+ * e1000_update_eeprom_checksum - Calculates/writes the EEPROM checksum
+ * @hw: Struct containing variables accessed by shared code
*
- * returns: - E1000_ERR_PHY if fail to read/write the PHY
- * E1000_SUCCESS at any other case.
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ */
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ DEBUGFUNC("e1000_update_eeprom_checksum");
+
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+ checksum = (u16) EEPROM_SUM - checksum;
+ if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
+ DEBUGOUT("EEPROM Write Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_eeprom - write words to the different EEPROM types.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word to be written to the EEPROM
*
- ****************************************************************************/
+ * If e1000_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ */
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
- u32 phy_ctrl = 0;
- s32 ret_val;
- u16 phy_data;
- DEBUGFUNC("e1000_set_d0_lplu_state");
-
- if (hw->mac_type <= e1000_82547_rev_2)
- return E1000_SUCCESS;
-
- if (hw->mac_type == e1000_ich8lan) {
- phy_ctrl = er32(PHY_CTRL);
- } else {
- ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
- if (ret_val)
- return ret_val;
- }
-
- if (!active) {
- if (hw->mac_type == e1000_ich8lan) {
- phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
- ew32(PHY_CTRL, phy_ctrl);
- } else {
- phy_data &= ~IGP02E1000_PM_D0_LPLU;
- ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
- * Dx states where the power conservation is most important. During
- * driver activity we should enable SmartSpeed, so performance is
- * maintained. */
- if (hw->smart_speed == e1000_smart_speed_on) {
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
- } else if (hw->smart_speed == e1000_smart_speed_off) {
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
- }
-
-
- } else {
-
- if (hw->mac_type == e1000_ich8lan) {
- phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
- ew32(PHY_CTRL, phy_ctrl);
- } else {
- phy_data |= IGP02E1000_PM_D0_LPLU;
- ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- /* When LPLU is enabled we should disable SmartSpeed */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data);
- if (ret_val)
- return ret_val;
-
- }
- return E1000_SUCCESS;
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ s32 status = 0;
+
+ DEBUGFUNC("e1000_write_eeprom");
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size)
+ || (words > eeprom->word_size - offset) || (words == 0)) {
+ DEBUGOUT("\"words\" parameter out of bounds\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Prepare the EEPROM for writing */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ status = e1000_write_eeprom_microwire(hw, offset, words, data);
+ } else {
+ status = e1000_write_eeprom_spi(hw, offset, words, data);
+ msleep(10);
+ }
+
+ /* Done with writing */
+ e1000_release_eeprom(hw);
+
+ return status;
}
-/******************************************************************************
- * Change VCO speed register to improve Bit Error Rate performance of SERDES.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static s32 e1000_set_vco_speed(struct e1000_hw *hw)
+/**
+ * e1000_write_eeprom_spi - Writes a 16 bit word to a given offset in an SPI EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
{
- s32 ret_val;
- u16 default_page = 0;
- u16 phy_data;
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u16 widx = 0;
- DEBUGFUNC("e1000_set_vco_speed");
+ DEBUGFUNC("e1000_write_eeprom_spi");
- switch (hw->mac_type) {
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- break;
- default:
- return E1000_SUCCESS;
- }
+ while (widx < words) {
+ u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
- /* Set PHY register 30, page 5, bit 8 to 0 */
+ if (e1000_spi_eeprom_ready(hw))
+ return -E1000_ERR_EEPROM;
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
- if (ret_val)
- return ret_val;
+ e1000_standby_eeprom(hw);
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
- if (ret_val)
- return ret_val;
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
+ eeprom->opcode_bits);
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
+ e1000_standby_eeprom(hw);
- phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
- if (ret_val)
- return ret_val;
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ write_opcode |= EEPROM_A8_OPCODE_SPI;
- /* Set PHY register 30, page 4, bit 11 to 1 */
+ /* Send the Write command (8-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
- if (ret_val)
- return ret_val;
+ e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2),
+ eeprom->address_bits);
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
+ /* Send the data */
- phy_data |= M88E1000_PHY_VCO_REG_BIT11;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
- if (ret_val)
- return ret_val;
+ /* Loop to allow for up to whole page write (32 bytes) of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ e1000_shift_out_ee_bits(hw, word_out, 16);
+ widx++;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
- if (ret_val)
- return ret_val;
+ /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
+ * operation, while the smaller eeproms are capable of an 8-byte
+ * PAGE WRITE operation. Break the inner loop to pass new address
+ */
+ if ((((offset + widx) * 2) % eeprom->page_size) == 0) {
+ e1000_standby_eeprom(hw);
+ break;
+ }
+ }
+ }
- return E1000_SUCCESS;
+ return E1000_SUCCESS;
}
+/**
+ * e1000_write_eeprom_microwire - Writes a 16 bit word to a given offset in a Microwire EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u16 words_written = 0;
+ u16 i = 0;
+
+ DEBUGFUNC("e1000_write_eeprom_microwire");
+
+ /* Send the write enable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 11). It's less work to include
+ * the 11 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This puts the
+ * EEPROM into write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
+ (u16) (eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+ /* Prepare the EEPROM */
+ e1000_standby_eeprom(hw);
+
+ while (words_written < words) {
+ /* Send the Write command (3-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16) (offset + words_written),
+ eeprom->address_bits);
+
+ /* Send the data */
+ e1000_shift_out_ee_bits(hw, data[words_written], 16);
+
+ /* Toggle the CS line. This in effect tells the EEPROM to execute
+ * the previous command.
+ */
+ e1000_standby_eeprom(hw);
+
+ /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for (i = 0; i < 200; i++) {
+ eecd = er32(EECD);
+ if (eecd & E1000_EECD_DO)
+ break;
+ udelay(50);
+ }
+ if (i == 200) {
+ DEBUGOUT("EEPROM Write did not complete\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Recover from write */
+ e1000_standby_eeprom(hw);
-/*****************************************************************************
- * This function reads the cookie from ARC ram.
+ words_written++;
+ }
+
+ /* Send the write disable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 10). It's less work to include
+ * the 10 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This takes the
+ * EEPROM out of write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
+ (u16) (eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_read_mac_addr - read the adapters MAC from eeprom
+ * @hw: Struct containing variables accessed by shared code
*
- * returns: - E1000_SUCCESS .
- ****************************************************************************/
-static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer)
+ * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
+ * second function of dual function devices
+ */
+s32 e1000_read_mac_addr(struct e1000_hw *hw)
{
- u8 i;
- u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET;
- u8 length = E1000_MNG_DHCP_COOKIE_LENGTH;
-
- length = (length >> 2);
- offset = (offset >> 2);
-
- for (i = 0; i < length; i++) {
- *((u32 *)buffer + i) =
- E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i);
- }
- return E1000_SUCCESS;
-}
+ u16 offset;
+ u16 eeprom_data, i;
+ DEBUGFUNC("e1000_read_mac_addr");
-/*****************************************************************************
- * This function checks whether the HOST IF is enabled for command operaton
- * and also checks whether the previous command is completed.
- * It busy waits in case of previous command is not completed.
+ for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+ offset = i >> 1;
+ if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8);
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ hw->perm_mac_addr[5] ^= 0x01;
+ break;
+ }
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_rx_addrs - Initializes receive address filters.
+ * @hw: Struct containing variables accessed by shared code
*
- * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or
- * timeout
- * - E1000_SUCCESS for success.
- ****************************************************************************/
-static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ */
+static void e1000_init_rx_addrs(struct e1000_hw *hw)
{
- u32 hicr;
- u8 i;
-
- /* Check that the host interface is enabled. */
- hicr = er32(HICR);
- if ((hicr & E1000_HICR_EN) == 0) {
- DEBUGOUT("E1000_HOST_EN bit disabled.\n");
- return -E1000_ERR_HOST_INTERFACE_COMMAND;
- }
- /* check the previous command is completed */
- for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
- hicr = er32(HICR);
- if (!(hicr & E1000_HICR_C))
- break;
- mdelay(1);
- }
-
- if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
- DEBUGOUT("Previous command timeout failed .\n");
- return -E1000_ERR_HOST_INTERFACE_COMMAND;
- }
- return E1000_SUCCESS;
+ u32 i;
+ u32 rar_num;
+
+ DEBUGFUNC("e1000_init_rx_addrs");
+
+ /* Setup the receive address. */
+ DEBUGOUT("Programming MAC Address into RAR[0]\n");
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ rar_num = E1000_RAR_ENTRIES;
+
+ /* Zero out the other 15 receive addresses. */
+ DEBUGOUT("Clearing RAR[1-15]\n");
+ for (i = 1; i < rar_num; i++) {
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH();
+ }
}
-/*****************************************************************************
- * This function writes the buffer content at the offset given on the host if.
- * It also does alignment considerations to do the writes in most efficient way.
- * Also fills up the sum of the buffer in *buffer parameter.
- *
- * returns - E1000_SUCCESS for success.
- ****************************************************************************/
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length,
- u16 offset, u8 *sum)
+/**
+ * e1000_hash_mc_addr - Hashes an address to determine its location in the multicast table
+ * @hw: Struct containing variables accessed by shared code
+ * @mc_addr: the multicast address to hash
+ */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
{
- u8 *tmp;
- u8 *bufptr = buffer;
- u32 data = 0;
- u16 remaining, i, j, prev_bytes;
-
- /* sum = only sum of the data and it is not checksum */
-
- if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) {
- return -E1000_ERR_PARAM;
- }
-
- tmp = (u8 *)&data;
- prev_bytes = offset & 0x3;
- offset &= 0xFFFC;
- offset >>= 2;
-
- if (prev_bytes) {
- data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset);
- for (j = prev_bytes; j < sizeof(u32); j++) {
- *(tmp + j) = *bufptr++;
- *sum += *(tmp + j);
- }
- E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data);
- length -= j - prev_bytes;
- offset++;
- }
-
- remaining = length & 0x3;
- length -= remaining;
-
- /* Calculate length in DWORDs */
- length >>= 2;
-
- /* The device driver writes the relevant command block into the
- * ram area. */
- for (i = 0; i < length; i++) {
- for (j = 0; j < sizeof(u32); j++) {
- *(tmp + j) = *bufptr++;
- *sum += *(tmp + j);
- }
-
- E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
- }
- if (remaining) {
- for (j = 0; j < sizeof(u32); j++) {
- if (j < remaining)
- *(tmp + j) = *bufptr++;
- else
- *(tmp + j) = 0;
-
- *sum += *(tmp + j);
- }
- E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data);
- }
-
- return E1000_SUCCESS;
+ u32 hash_value = 0;
+
+ /* The portion of the address that is used for the hash table is
+ * determined by the mc_filter_type setting.
+ */
+ switch (hw->mc_filter_type) {
+ /* [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ */
+ case 0:
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+ break;
+ case 1:
+ /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+ break;
+ case 2:
+ /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+ break;
+ case 3:
+ /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+ break;
+ }
+
+ hash_value &= 0xFFF;
+ return hash_value;
}
+/**
+ * e1000_rar_set - Puts an ethernet address into a receive address register.
+ * @hw: Struct containing variables accessed by shared code
+ * @addr: Address to put into receive address register
+ * @index: Receive address register to write
+ */
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
-/*****************************************************************************
- * This function writes the command header after does the checksum calculation.
- *
- * returns - E1000_SUCCESS for success.
- ****************************************************************************/
-static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
- struct e1000_host_mng_command_header *hdr)
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
+ * unit hang.
+ *
+ * Description:
+ * If there are any Rx frames queued up or otherwise present in the HW
+ * before RSS is enabled, and then we enable RSS, the HW Rx unit will
+ * hang. To work around this issue, we have to disable receives and
+ * flush out all Rx frames before we enable RSS. To do so, we modify we
+ * redirect all Rx traffic to manageability and then reset the HW.
+ * This flushes away Rx frames, and (since the redirections to
+ * manageability persists across resets) keeps new ones from coming in
+ * while we work. Then, we clear the Address Valid AV bit for all MAC
+ * addresses and undo the re-direction to manageability.
+ * Now, frames are coming in again, but the MAC won't accept them, so
+ * far so good. We now proceed to initialize RSS (if necessary) and
+ * configure the Rx unit. Last, we re-enable the AV bits and continue
+ * on our merry way.
+ */
+ switch (hw->mac_type) {
+ default:
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+ break;
+ }
+
+ E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+ E1000_WRITE_FLUSH();
+}
+
+/**
+ * e1000_write_vfta - Writes a value to the specified offset in the VLAN filter table.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: Offset in VLAN filer table to write
+ * @value: Value to write into VLAN filter table
+ */
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
{
- u16 i;
- u8 sum;
- u8 *buffer;
+ u32 temp;
+
+ if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+ temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+ E1000_WRITE_FLUSH();
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ }
+}
- /* Write the whole command header structure which includes sum of
- * the buffer */
+/**
+ * e1000_clear_vfta - Clears the VLAN filer table
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /* If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of the
+ * manageability unit */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+ E1000_WRITE_FLUSH();
+ }
+}
- u16 length = sizeof(struct e1000_host_mng_command_header);
+static s32 e1000_id_led_init(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 eeprom_data, i, temp;
+ const u16 led_mask = 0x0F;
- sum = hdr->checksum;
- hdr->checksum = 0;
+ DEBUGFUNC("e1000_id_led_init");
- buffer = (u8 *)hdr;
- i = length;
- while (i--)
- sum += buffer[i];
+ if (hw->mac_type < e1000_82540) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
- hdr->checksum = 0 - sum;
+ ledctl = er32(LEDCTL);
+ hw->ledctl_default = ledctl;
+ hw->ledctl_mode1 = hw->ledctl_default;
+ hw->ledctl_mode2 = hw->ledctl_default;
- length >>= 2;
- /* The device driver writes the relevant command block into the ram area. */
- for (i = 0; i < length; i++) {
- E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *)hdr + i));
- E1000_WRITE_FLUSH();
- }
+ if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
+ DEBUGOUT("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
- return E1000_SUCCESS;
-}
+ if ((eeprom_data == ID_LED_RESERVED_0000) ||
+ (eeprom_data == ID_LED_RESERVED_FFFF)) {
+ eeprom_data = ID_LED_DEFAULT;
+ }
+ for (i = 0; i < 4; i++) {
+ temp = (eeprom_data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+ return E1000_SUCCESS;
+}
-/*****************************************************************************
- * This function indicates to ARC that a new command is pending which completes
- * one write operation by the driver.
+/**
+ * e1000_setup_led
+ * @hw: Struct containing variables accessed by shared code
*
- * returns - E1000_SUCCESS for success.
- ****************************************************************************/
-static s32 e1000_mng_write_commit(struct e1000_hw *hw)
+ * Prepares SW controlable LED for use and saves the current state of the LED.
+ */
+s32 e1000_setup_led(struct e1000_hw *hw)
{
- u32 hicr;
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
- hicr = er32(HICR);
- /* Setting this bit tells the ARC that a new command is pending. */
- ew32(HICR, hicr | E1000_HICR_C);
+ DEBUGFUNC("e1000_setup_led");
- return E1000_SUCCESS;
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No setup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn off PHY Smart Power Down (if enabled) */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ &hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ (u16) (hw->phy_spd_default &
+ ~IGP01E1000_GMII_SPD));
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ ledctl = er32(LEDCTL);
+ /* Save current LEDCTL settings */
+ hw->ledctl_default = ledctl;
+ /* Turn off LED0 */
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+ E1000_LEDCTL_LED0_MODE_SHIFT);
+ ew32(LEDCTL, ledctl);
+ } else if (hw->media_type == e1000_media_type_copper)
+ ew32(LEDCTL, hw->ledctl_mode1);
+ break;
+ }
+
+ return E1000_SUCCESS;
}
+/**
+ * e1000_cleanup_led - Restores the saved state of the SW controlable LED.
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_cleanup_led(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_cleanup_led");
-/*****************************************************************************
- * This function checks the mode of the firmware.
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No cleanup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn on PHY Smart Power Down (if previously enabled) */
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ /* Restore LEDCTL settings */
+ ew32(LEDCTL, hw->ledctl_default);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_on - Turns on the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_led_on(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_on");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode2);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_off - Turns off the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_led_off(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ DEBUGFUNC("e1000_led_off");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode1);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_clear_hw_cntrs - Clears all hardware statistics counters.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
+{
+ volatile u32 temp;
+
+ temp = er32(CRCERRS);
+ temp = er32(SYMERRS);
+ temp = er32(MPC);
+ temp = er32(SCC);
+ temp = er32(ECOL);
+ temp = er32(MCC);
+ temp = er32(LATECOL);
+ temp = er32(COLC);
+ temp = er32(DC);
+ temp = er32(SEC);
+ temp = er32(RLEC);
+ temp = er32(XONRXC);
+ temp = er32(XONTXC);
+ temp = er32(XOFFRXC);
+ temp = er32(XOFFTXC);
+ temp = er32(FCRUC);
+
+ temp = er32(PRC64);
+ temp = er32(PRC127);
+ temp = er32(PRC255);
+ temp = er32(PRC511);
+ temp = er32(PRC1023);
+ temp = er32(PRC1522);
+
+ temp = er32(GPRC);
+ temp = er32(BPRC);
+ temp = er32(MPRC);
+ temp = er32(GPTC);
+ temp = er32(GORCL);
+ temp = er32(GORCH);
+ temp = er32(GOTCL);
+ temp = er32(GOTCH);
+ temp = er32(RNBC);
+ temp = er32(RUC);
+ temp = er32(RFC);
+ temp = er32(ROC);
+ temp = er32(RJC);
+ temp = er32(TORL);
+ temp = er32(TORH);
+ temp = er32(TOTL);
+ temp = er32(TOTH);
+ temp = er32(TPR);
+ temp = er32(TPT);
+
+ temp = er32(PTC64);
+ temp = er32(PTC127);
+ temp = er32(PTC255);
+ temp = er32(PTC511);
+ temp = er32(PTC1023);
+ temp = er32(PTC1522);
+
+ temp = er32(MPTC);
+ temp = er32(BPTC);
+
+ if (hw->mac_type < e1000_82543)
+ return;
+
+ temp = er32(ALGNERRC);
+ temp = er32(RXERRC);
+ temp = er32(TNCRS);
+ temp = er32(CEXTERR);
+ temp = er32(TSCTC);
+ temp = er32(TSCTFC);
+
+ if (hw->mac_type <= e1000_82544)
+ return;
+
+ temp = er32(MGTPRC);
+ temp = er32(MGTPDC);
+ temp = er32(MGTPTC);
+}
+
+/**
+ * e1000_reset_adaptive - Resets Adaptive IFS to its default state.
+ * @hw: Struct containing variables accessed by shared code
*
- * returns - true when the mode is IAMT or false.
- ****************************************************************************/
-bool e1000_check_mng_mode(struct e1000_hw *hw)
+ * Call this after e1000_init_hw. You may override the IFS defaults by setting
+ * hw->ifs_params_forced to true. However, you must initialize hw->
+ * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
+ * before calling this function.
+ */
+void e1000_reset_adaptive(struct e1000_hw *hw)
{
- u32 fwsm;
-
- fwsm = er32(FWSM);
-
- if (hw->mac_type == e1000_ich8lan) {
- if ((fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_MNG_ICH_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
- return true;
- } else if ((fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT))
- return true;
+ DEBUGFUNC("e1000_reset_adaptive");
- return false;
+ if (hw->adaptive_ifs) {
+ if (!hw->ifs_params_forced) {
+ hw->current_ifs_val = 0;
+ hw->ifs_min_val = IFS_MIN;
+ hw->ifs_max_val = IFS_MAX;
+ hw->ifs_step_size = IFS_STEP;
+ hw->ifs_ratio = IFS_RATIO;
+ }
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
}
-
-/*****************************************************************************
- * This function writes the dhcp info .
- ****************************************************************************/
-s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
+/**
+ * e1000_update_adaptive - update adaptive IFS
+ * @hw: Struct containing variables accessed by shared code
+ * @tx_packets: Number of transmits since last callback
+ * @total_collisions: Number of collisions since last callback
+ *
+ * Called during the callback/watchdog routine to update IFS value based on
+ * the ratio of transmits to collisions.
+ */
+void e1000_update_adaptive(struct e1000_hw *hw)
{
- s32 ret_val;
- struct e1000_host_mng_command_header hdr;
-
- hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
- hdr.command_length = length;
- hdr.reserved1 = 0;
- hdr.reserved2 = 0;
- hdr.checksum = 0;
-
- ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val == E1000_SUCCESS) {
- ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr),
- &(hdr.checksum));
- if (ret_val == E1000_SUCCESS) {
- ret_val = e1000_mng_write_cmd_header(hw, &hdr);
- if (ret_val == E1000_SUCCESS)
- ret_val = e1000_mng_write_commit(hw);
- }
- }
- return ret_val;
+ DEBUGFUNC("e1000_update_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
+ if (hw->tx_packet_delta > MIN_NUM_XMITS) {
+ hw->in_ifs_mode = true;
+ if (hw->current_ifs_val < hw->ifs_max_val) {
+ if (hw->current_ifs_val == 0)
+ hw->current_ifs_val =
+ hw->ifs_min_val;
+ else
+ hw->current_ifs_val +=
+ hw->ifs_step_size;
+ ew32(AIT, hw->current_ifs_val);
+ }
+ }
+ } else {
+ if (hw->in_ifs_mode
+ && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+ hw->current_ifs_val = 0;
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ }
+ }
+ } else {
+ DEBUGOUT("Not in Adaptive IFS mode!\n");
+ }
}
-
-/*****************************************************************************
- * This function calculates the checksum.
+/**
+ * e1000_tbi_adjust_stats
+ * @hw: Struct containing variables accessed by shared code
+ * @frame_len: The length of the frame in question
+ * @mac_addr: The Ethernet destination address of the frame in question
*
- * returns - checksum of buffer contents.
- ****************************************************************************/
-static u8 e1000_calculate_mng_checksum(char *buffer, u32 length)
+ * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+ */
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 *mac_addr)
{
- u8 sum = 0;
- u32 i;
-
- if (!buffer)
- return 0;
+ u64 carry_bit;
- for (i=0; i < length; i++)
- sum += buffer[i];
+ /* First adjust the frame length. */
+ frame_len--;
+ /* We need to adjust the statistics counters, since the hardware
+ * counters overcount this packet as a CRC error and undercount
+ * the packet as a good packet
+ */
+ /* This packet should not be counted as a CRC error. */
+ stats->crcerrs--;
+ /* This packet does count as a Good Packet Received. */
+ stats->gprc++;
+
+ /* Adjust the Good Octets received counters */
+ carry_bit = 0x80000000 & stats->gorcl;
+ stats->gorcl += frame_len;
+ /* If the high bit of Gorcl (the low 32 bits of the Good Octets
+ * Received Count) was one before the addition,
+ * AND it is zero after, then we lost the carry out,
+ * need to add one to Gorch (Good Octets Received Count High).
+ * This could be simplified if all environments supported
+ * 64-bit integers.
+ */
+ if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
+ stats->gorch++;
+ /* Is this a broadcast or multicast? Check broadcast first,
+ * since the test for a multicast frame will test positive on
+ * a broadcast frame.
+ */
+ if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
+ /* Broadcast packet */
+ stats->bprc++;
+ else if (*mac_addr & 0x01)
+ /* Multicast packet */
+ stats->mprc++;
+
+ if (frame_len == hw->max_frame_size) {
+ /* In this case, the hardware has overcounted the number of
+ * oversize frames.
+ */
+ if (stats->roc > 0)
+ stats->roc--;
+ }
- return (u8)(0 - sum);
+ /* Adjust the bin counters when the extra byte put the frame in the
+ * wrong bin. Remember that the frame_len was adjusted above.
+ */
+ if (frame_len == 64) {
+ stats->prc64++;
+ stats->prc127--;
+ } else if (frame_len == 127) {
+ stats->prc127++;
+ stats->prc255--;
+ } else if (frame_len == 255) {
+ stats->prc255++;
+ stats->prc511--;
+ } else if (frame_len == 511) {
+ stats->prc511++;
+ stats->prc1023--;
+ } else if (frame_len == 1023) {
+ stats->prc1023++;
+ stats->prc1522--;
+ } else if (frame_len == 1522) {
+ stats->prc1522++;
+ }
}
-/*****************************************************************************
- * This function checks whether tx pkt filtering needs to be enabled or not.
+/**
+ * e1000_get_bus_info
+ * @hw: Struct containing variables accessed by shared code
*
- * returns - true for packet filtering or false.
- ****************************************************************************/
-bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw)
+ * Gets the current PCI bus type, speed, and width of the hardware
+ */
+void e1000_get_bus_info(struct e1000_hw *hw)
{
- /* called in init as well as watchdog timer functions */
-
- s32 ret_val, checksum;
- bool tx_filter = false;
- struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie);
- u8 *buffer = (u8 *) &(hw->mng_cookie);
-
- if (e1000_check_mng_mode(hw)) {
- ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val == E1000_SUCCESS) {
- ret_val = e1000_host_if_read_cookie(hw, buffer);
- if (ret_val == E1000_SUCCESS) {
- checksum = hdr->checksum;
- hdr->checksum = 0;
- if ((hdr->signature == E1000_IAMT_SIGNATURE) &&
- checksum == e1000_calculate_mng_checksum((char *)buffer,
- E1000_MNG_DHCP_COOKIE_LENGTH)) {
- if (hdr->status &
- E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT)
- tx_filter = true;
- } else
- tx_filter = true;
- } else
- tx_filter = true;
- }
- }
-
- hw->tx_pkt_filtering = tx_filter;
- return tx_filter;
+ u32 status;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->bus_type = e1000_bus_type_pci;
+ hw->bus_speed = e1000_bus_speed_unknown;
+ hw->bus_width = e1000_bus_width_unknown;
+ break;
+ default:
+ status = er32(STATUS);
+ hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
+ e1000_bus_type_pcix : e1000_bus_type_pci;
+
+ if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+ hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
+ e1000_bus_speed_66 : e1000_bus_speed_120;
+ } else if (hw->bus_type == e1000_bus_type_pci) {
+ hw->bus_speed = (status & E1000_STATUS_PCI66) ?
+ e1000_bus_speed_66 : e1000_bus_speed_33;
+ } else {
+ switch (status & E1000_STATUS_PCIX_SPEED) {
+ case E1000_STATUS_PCIX_SPEED_66:
+ hw->bus_speed = e1000_bus_speed_66;
+ break;
+ case E1000_STATUS_PCIX_SPEED_100:
+ hw->bus_speed = e1000_bus_speed_100;
+ break;
+ case E1000_STATUS_PCIX_SPEED_133:
+ hw->bus_speed = e1000_bus_speed_133;
+ break;
+ default:
+ hw->bus_speed = e1000_bus_speed_reserved;
+ break;
+ }
+ }
+ hw->bus_width = (status & E1000_STATUS_BUS64) ?
+ e1000_bus_width_64 : e1000_bus_width_32;
+ break;
+ }
}
-/******************************************************************************
- * Verifies the hardware needs to allow ARPs to be processed by the host
- *
- * hw - Struct containing variables accessed by shared code
- *
- * returns: - true/false
+/**
+ * e1000_write_reg_io
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset to write to
+ * @value: value to write
*
- *****************************************************************************/
-u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+ * Writes a value to one of the devices registers using port I/O (as opposed to
+ * memory mapped I/O). Only 82544 and newer devices support port I/O.
+ */
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
{
- u32 manc;
- u32 fwsm, factps;
-
- if (hw->asf_firmware_present) {
- manc = er32(MANC);
-
- if (!(manc & E1000_MANC_RCV_TCO_EN) ||
- !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
- return false;
- if (e1000_arc_subsystem_valid(hw)) {
- fwsm = er32(FWSM);
- factps = er32(FACTPS);
-
- if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) ==
- e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG))
- return true;
- } else
- if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
- return true;
- }
- return false;
-}
+ unsigned long io_addr = hw->io_base;
+ unsigned long io_data = hw->io_base + 4;
-static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 mii_status_reg;
- u16 i;
-
- /* Polarity reversal workaround for forced 10F/10H links. */
-
- /* Disable the transmitter on the PHY */
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
- if (ret_val)
- return ret_val;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
- if (ret_val)
- return ret_val;
-
- /* This loop will early-out if the NO link condition has been met. */
- for (i = PHY_FORCE_TIME; i > 0; i--) {
- /* Read the MII Status Register and wait for Link Status bit
- * to be clear.
- */
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0) break;
- mdelay(100);
- }
-
- /* Recommended delay time after link has been lost */
- mdelay(1000);
-
- /* Now we will re-enable th transmitter on the PHY */
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
- if (ret_val)
- return ret_val;
- mdelay(50);
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
- if (ret_val)
- return ret_val;
- mdelay(50);
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
- if (ret_val)
- return ret_val;
- mdelay(50);
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
- if (ret_val)
- return ret_val;
-
- /* This loop will early-out if the link condition has been met. */
- for (i = PHY_FORCE_TIME; i > 0; i--) {
- /* Read the MII Status Register and wait for Link Status bit
- * to be set.
- */
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if (mii_status_reg & MII_SR_LINK_STATUS) break;
- mdelay(100);
- }
- return E1000_SUCCESS;
+ e1000_io_write(hw, io_addr, offset);
+ e1000_io_write(hw, io_data, value);
}
-/***************************************************************************
+/**
+ * e1000_get_cable_length - Estimates the cable length.
+ * @hw: Struct containing variables accessed by shared code
+ * @min_length: The estimated minimum length
+ * @max_length: The estimated maximum length
*
- * Disables PCI-Express master access.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - none.
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
*
- ***************************************************************************/
-static void e1000_set_pci_express_master_disable(struct e1000_hw *hw)
+ * This function always returns a ranged length (minimum & maximum).
+ * So for M88 phy's, this function interprets the one value returned from the
+ * register to the minimum and maximum range.
+ * For IGP phy's, the function calculates the range by the AGC registers.
+ */
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length)
{
- u32 ctrl;
-
- DEBUGFUNC("e1000_set_pci_express_master_disable");
+ s32 ret_val;
+ u16 agc_value = 0;
+ u16 i, phy_data;
+ u16 cable_length;
- if (hw->bus_type != e1000_bus_type_pci_express)
- return;
+ DEBUGFUNC("e1000_get_cable_length");
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
- ew32(CTRL, ctrl);
-}
+ *min_length = *max_length = 0;
-/*******************************************************************************
- *
- * Disables PCI-Express master access and verifies there are no pending requests
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't
- * caused the master requests to be disabled.
- * E1000_SUCCESS master requests disabled.
- *
- ******************************************************************************/
-s32 e1000_disable_pciex_master(struct e1000_hw *hw)
-{
- s32 timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */
+ /* Use old method for Phy older than IGP */
+ if (hw->phy_type == e1000_phy_m88) {
- DEBUGFUNC("e1000_disable_pciex_master");
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
- if (hw->bus_type != e1000_bus_type_pci_express)
- return E1000_SUCCESS;
+ /* Convert the enum value to ranged values */
+ switch (cable_length) {
+ case e1000_cable_length_50:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_50;
+ break;
+ case e1000_cable_length_50_80:
+ *min_length = e1000_igp_cable_length_50;
+ *max_length = e1000_igp_cable_length_80;
+ break;
+ case e1000_cable_length_80_110:
+ *min_length = e1000_igp_cable_length_80;
+ *max_length = e1000_igp_cable_length_110;
+ break;
+ case e1000_cable_length_110_140:
+ *min_length = e1000_igp_cable_length_110;
+ *max_length = e1000_igp_cable_length_140;
+ break;
+ case e1000_cable_length_140:
+ *min_length = e1000_igp_cable_length_140;
+ *max_length = e1000_igp_cable_length_170;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+ } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+ u16 cur_agc_value;
+ u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ { IGP01E1000_PHY_AGC_A,
+ IGP01E1000_PHY_AGC_B,
+ IGP01E1000_PHY_AGC_C,
+ IGP01E1000_PHY_AGC_D
+ };
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+
+ ret_val =
+ e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+
+ /* Value bound check. */
+ if ((cur_agc_value >=
+ IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1)
+ || (cur_agc_value == 0))
+ return -E1000_ERR_PHY;
+
+ agc_value += cur_agc_value;
+
+ /* Update minimal AGC value. */
+ if (min_agc_value > cur_agc_value)
+ min_agc_value = cur_agc_value;
+ }
- e1000_set_pci_express_master_disable(hw);
+ /* Remove the minimal AGC result for length < 50m */
+ if (agc_value <
+ IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+ agc_value -= min_agc_value;
- while (timeout) {
- if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
- break;
- else
- udelay(100);
- timeout--;
- }
+ /* Get the average length of the remaining 3 channels */
+ agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
+ } else {
+ /* Get the average length of all the 4 channels. */
+ agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
+ }
- if (!timeout) {
- DEBUGOUT("Master requests are pending.\n");
- return -E1000_ERR_MASTER_REQUESTS_PENDING;
- }
+ /* Set the range of the calculated length. */
+ *min_length = ((e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) > 0) ?
+ (e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) : 0;
+ *max_length = e1000_igp_cable_length_table[agc_value] +
+ IGP01E1000_AGC_RANGE;
+ }
- return E1000_SUCCESS;
+ return E1000_SUCCESS;
}
-/*******************************************************************************
- *
- * Check for EEPROM Auto Read bit done.
- *
- * hw: Struct containing variables accessed by shared code
+/**
+ * e1000_check_polarity - Check the cable polarity
+ * @hw: Struct containing variables accessed by shared code
+ * @polarity: output parameter : 0 - Polarity is not reversed
+ * 1 - Polarity is reversed.
*
- * returns: - E1000_ERR_RESET if fail to reset MAC
- * E1000_SUCCESS at any other case.
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
*
- ******************************************************************************/
-static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
+ * For phy's older than IGP, this function simply reads the polarity bit in the
+ * Phy Status register. For IGP phy's, this bit is valid only if link speed is
+ * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
+ * return 0. If the link speed is 1000 Mbps the polarity status is in the
+ * IGP01E1000_PHY_PCS_INIT_REG.
+ */
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity)
{
- s32 timeout = AUTO_READ_DONE_TIMEOUT;
-
- DEBUGFUNC("e1000_get_auto_rd_done");
-
- switch (hw->mac_type) {
- default:
- msleep(5);
- break;
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- case e1000_80003es2lan:
- case e1000_ich8lan:
- while (timeout) {
- if (er32(EECD) & E1000_EECD_AUTO_RD)
- break;
- else msleep(1);
- timeout--;
- }
-
- if (!timeout) {
- DEBUGOUT("Auto read by HW from EEPROM has not completed.\n");
- return -E1000_ERR_RESET;
- }
- break;
- }
-
- /* PHY configuration from NVM just starts after EECD_AUTO_RD sets to high.
- * Need to wait for PHY configuration completion before accessing NVM
- * and PHY. */
- if (hw->mac_type == e1000_82573)
- msleep(25);
-
- return E1000_SUCCESS;
+ s32 ret_val;
+ u16 phy_data;
+
+ DEBUGFUNC("e1000_check_polarity");
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* return the Polarity bit in the Status register. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
+ M88E1000_PSSR_REV_POLARITY_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+
+ } else if (hw->phy_type == e1000_phy_igp) {
+ /* Read the Status register to check the speed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
+ * find the polarity status */
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+
+ /* Read the GIG initialization PCS register (0x00B4) */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Check the polarity bits */
+ *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
+ e1000_rev_polarity_reversed :
+ e1000_rev_polarity_normal;
+ } else {
+ /* For 10 Mbps, read the polarity bit in the status register. (for
+ * 100 Mbps this bit is always 0) */
+ *polarity =
+ (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
+ e1000_rev_polarity_reversed :
+ e1000_rev_polarity_normal;
+ }
+ }
+ return E1000_SUCCESS;
}
-/***************************************************************************
- * Checks if the PHY configuration is done
- *
- * hw: Struct containing variables accessed by shared code
+/**
+ * e1000_check_downshift - Check if Downshift occurred
+ * @hw: Struct containing variables accessed by shared code
+ * @downshift: output parameter : 0 - No Downshift occurred.
+ * 1 - Downshift occurred.
*
- * returns: - E1000_ERR_RESET if fail to reset MAC
- * E1000_SUCCESS at any other case.
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
*
- ***************************************************************************/
-static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
+ * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
+ * Link Health register. In IGP this bit is latched high, so the driver must
+ * read it immediately after link is established.
+ */
+static s32 e1000_check_downshift(struct e1000_hw *hw)
{
- s32 timeout = PHY_CFG_TIMEOUT;
- u32 cfg_mask = E1000_EEPROM_CFG_DONE;
-
- DEBUGFUNC("e1000_get_phy_cfg_done");
-
- switch (hw->mac_type) {
- default:
- mdelay(10);
- break;
- case e1000_80003es2lan:
- /* Separate *_CFG_DONE_* bit for each port */
- if (er32(STATUS) & E1000_STATUS_FUNC_1)
- cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1;
- /* Fall Through */
- case e1000_82571:
- case e1000_82572:
- while (timeout) {
- if (er32(EEMNGCTL) & cfg_mask)
- break;
- else
- msleep(1);
- timeout--;
- }
- if (!timeout) {
- DEBUGOUT("MNG configuration cycle has not completed.\n");
- return -E1000_ERR_RESET;
- }
- break;
- }
-
- return E1000_SUCCESS;
-}
+ s32 ret_val;
+ u16 phy_data;
-/***************************************************************************
- *
- * Using the combination of SMBI and SWESMBI semaphore bits when resetting
- * adapter or Eeprom access.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - E1000_ERR_EEPROM if fail to access EEPROM.
- * E1000_SUCCESS at any other case.
- *
- ***************************************************************************/
-static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw)
-{
- s32 timeout;
- u32 swsm;
-
- DEBUGFUNC("e1000_get_hw_eeprom_semaphore");
-
- if (!hw->eeprom_semaphore_present)
- return E1000_SUCCESS;
-
- if (hw->mac_type == e1000_80003es2lan) {
- /* Get the SW semaphore. */
- if (e1000_get_software_semaphore(hw) != E1000_SUCCESS)
- return -E1000_ERR_EEPROM;
- }
-
- /* Get the FW semaphore. */
- timeout = hw->eeprom.word_size + 1;
- while (timeout) {
- swsm = er32(SWSM);
- swsm |= E1000_SWSM_SWESMBI;
- ew32(SWSM, swsm);
- /* if we managed to set the bit we got the semaphore. */
- swsm = er32(SWSM);
- if (swsm & E1000_SWSM_SWESMBI)
- break;
-
- udelay(50);
- timeout--;
- }
-
- if (!timeout) {
- /* Release semaphores */
- e1000_put_hw_eeprom_semaphore(hw);
- DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n");
- return -E1000_ERR_EEPROM;
- }
-
- return E1000_SUCCESS;
-}
+ DEBUGFUNC("e1000_check_downshift");
-/***************************************************************************
- * This function clears HW semaphore bits.
- *
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - None.
- *
- ***************************************************************************/
-static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw)
-{
- u32 swsm;
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
- DEBUGFUNC("e1000_put_hw_eeprom_semaphore");
+ hw->speed_downgraded =
+ (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
- if (!hw->eeprom_semaphore_present)
- return;
+ hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
+ M88E1000_PSSR_DOWNSHIFT_SHIFT;
+ }
- swsm = er32(SWSM);
- if (hw->mac_type == e1000_80003es2lan) {
- /* Release both semaphores. */
- swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
- } else
- swsm &= ~(E1000_SWSM_SWESMBI);
- ew32(SWSM, swsm);
+ return E1000_SUCCESS;
}
-/***************************************************************************
- *
- * Obtaining software semaphore bit (SMBI) before resetting PHY.
+/**
+ * e1000_config_dsp_after_link_change
+ * @hw: Struct containing variables accessed by shared code
+ * @link_up: was link up at the time this was called
*
- * hw: Struct containing variables accessed by shared code
- *
- * returns: - E1000_ERR_RESET if fail to obtain semaphore.
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
* E1000_SUCCESS at any other case.
*
- ***************************************************************************/
-static s32 e1000_get_software_semaphore(struct e1000_hw *hw)
-{
- s32 timeout = hw->eeprom.word_size + 1;
- u32 swsm;
-
- DEBUGFUNC("e1000_get_software_semaphore");
-
- if (hw->mac_type != e1000_80003es2lan) {
- return E1000_SUCCESS;
- }
-
- while (timeout) {
- swsm = er32(SWSM);
- /* If SMBI bit cleared, it is now set and we hold the semaphore */
- if (!(swsm & E1000_SWSM_SMBI))
- break;
- mdelay(1);
- timeout--;
- }
-
- if (!timeout) {
- DEBUGOUT("Driver can't access device - SMBI bit is set.\n");
- return -E1000_ERR_RESET;
- }
-
- return E1000_SUCCESS;
-}
+ * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
+ * gigabit link is achieved to improve link quality.
+ */
-/***************************************************************************
- *
- * Release semaphore bit (SMBI).
- *
- * hw: Struct containing variables accessed by shared code
- *
- ***************************************************************************/
-static void e1000_release_software_semaphore(struct e1000_hw *hw)
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
{
- u32 swsm;
-
- DEBUGFUNC("e1000_release_software_semaphore");
-
- if (hw->mac_type != e1000_80003es2lan) {
- return;
- }
+ s32 ret_val;
+ u16 phy_data, phy_saved_data, speed, duplex, i;
+ u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] =
+ { IGP01E1000_PHY_AGC_PARAM_A,
+ IGP01E1000_PHY_AGC_PARAM_B,
+ IGP01E1000_PHY_AGC_PARAM_C,
+ IGP01E1000_PHY_AGC_PARAM_D
+ };
+ u16 min_length, max_length;
+
+ DEBUGFUNC("e1000_config_dsp_after_link_change");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ if (link_up) {
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ DEBUGOUT("Error getting link speed and duplex\n");
+ return ret_val;
+ }
- swsm = er32(SWSM);
- /* Release the SW semaphores.*/
- swsm &= ~E1000_SWSM_SMBI;
- ew32(SWSM, swsm);
-}
+ if (speed == SPEED_1000) {
+
+ ret_val =
+ e1000_get_cable_length(hw, &min_length,
+ &max_length);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->dsp_config_state == e1000_dsp_config_enabled)
+ && min_length >= e1000_igp_cable_length_50) {
+
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val =
+ e1000_read_phy_reg(hw,
+ dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &=
+ ~IGP01E1000_PHY_EDAC_MU_INDEX;
+
+ ret_val =
+ e1000_write_phy_reg(hw,
+ dsp_reg_array
+ [i], phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ hw->dsp_config_state =
+ e1000_dsp_config_activated;
+ }
+
+ if ((hw->ffe_config_state == e1000_ffe_config_enabled)
+ && (min_length < e1000_igp_cable_length_50)) {
+
+ u16 ffe_idle_err_timeout =
+ FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+ u32 idle_errs = 0;
+
+ /* clear previous idle error counts */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ for (i = 0; i < ffe_idle_err_timeout; i++) {
+ udelay(1000);
+ ret_val =
+ e1000_read_phy_reg(hw,
+ PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ idle_errs +=
+ (phy_data &
+ SR_1000T_IDLE_ERROR_CNT);
+ if (idle_errs >
+ SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT)
+ {
+ hw->ffe_config_state =
+ e1000_ffe_config_active;
+
+ ret_val =
+ e1000_write_phy_reg(hw,
+ IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_CM_CP);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ if (idle_errs)
+ ffe_idle_err_timeout =
+ FFE_IDLE_ERR_COUNT_TIMEOUT_100;
+ }
+ }
+ }
+ } else {
+ if (hw->dsp_config_state == e1000_dsp_config_activated) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val =
+ e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val =
+ e1000_read_phy_reg(hw, dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+ phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
+
+ ret_val =
+ e1000_write_phy_reg(hw, dsp_reg_array[i],
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val =
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ }
-/******************************************************************************
- * Checks if PHY reset is blocked due to SOL/IDER session, for example.
- * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to
- * the caller to figure out how to deal with it.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * returns: - E1000_BLK_PHY_RESET
- * E1000_SUCCESS
- *
- *****************************************************************************/
-s32 e1000_check_phy_reset_block(struct e1000_hw *hw)
-{
- u32 manc = 0;
- u32 fwsm = 0;
-
- if (hw->mac_type == e1000_ich8lan) {
- fwsm = er32(FWSM);
- return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS
- : E1000_BLK_PHY_RESET;
- }
-
- if (hw->mac_type > e1000_82547_rev_2)
- manc = er32(MANC);
- return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
- E1000_BLK_PHY_RESET : E1000_SUCCESS;
-}
+ if (hw->ffe_config_state == e1000_ffe_config_active) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val =
+ e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw)
-{
- u32 fwsm;
-
- /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC
- * may not be provided a DMA clock when no manageability features are
- * enabled. We do not want to perform any reads/writes to these registers
- * if this is the case. We read FWSM to determine the manageability mode.
- */
- switch (hw->mac_type) {
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- case e1000_80003es2lan:
- fwsm = er32(FWSM);
- if ((fwsm & E1000_FWSM_MODE_MASK) != 0)
- return true;
- break;
- case e1000_ich8lan:
- return true;
- default:
- break;
- }
- return false;
-}
+ if (ret_val)
+ return ret_val;
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
-/******************************************************************************
- * Configure PCI-Ex no-snoop
- *
- * hw - Struct containing variables accessed by shared code.
- * no_snoop - Bitmap of no-snoop events.
- *
- * returns: E1000_SUCCESS
- *
- *****************************************************************************/
-static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop)
-{
- u32 gcr_reg = 0;
+ if (ret_val)
+ return ret_val;
- DEBUGFUNC("e1000_set_pci_ex_no_snoop");
+ mdelay(20);
- if (hw->bus_type == e1000_bus_type_unknown)
- e1000_get_bus_info(hw);
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_DEFAULT);
+ if (ret_val)
+ return ret_val;
- if (hw->bus_type != e1000_bus_type_pci_express)
- return E1000_SUCCESS;
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
- if (no_snoop) {
- gcr_reg = er32(GCR);
- gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL);
- gcr_reg |= no_snoop;
- ew32(GCR, gcr_reg);
- }
- if (hw->mac_type == e1000_ich8lan) {
- u32 ctrl_ext;
+ mdelay(20);
- ew32(GCR, PCI_EX_82566_SNOOP_ALL);
+ /* Now enable the transmitter */
+ ret_val =
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
- ew32(CTRL_EXT, ctrl_ext);
- }
+ if (ret_val)
+ return ret_val;
- return E1000_SUCCESS;
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+ }
+ }
+ return E1000_SUCCESS;
}
-/***************************************************************************
+/**
+ * e1000_set_phy_mode - Set PHY to class A mode
+ * @hw: Struct containing variables accessed by shared code
*
- * Get software semaphore FLAG bit (SWFLAG).
- * SWFLAG is used to synchronize the access to all shared resource between
- * SW, FW and HW.
- *
- * hw: Struct containing variables accessed by shared code
- *
- ***************************************************************************/
-static s32 e1000_get_software_flag(struct e1000_hw *hw)
+ * Assumes the following operations will follow to enable the new class mode.
+ * 1. Do a PHY soft reset
+ * 2. Restart auto-negotiation or force link.
+ */
+static s32 e1000_set_phy_mode(struct e1000_hw *hw)
{
- s32 timeout = PHY_CFG_TIMEOUT;
- u32 extcnf_ctrl;
-
- DEBUGFUNC("e1000_get_software_flag");
-
- if (hw->mac_type == e1000_ich8lan) {
- while (timeout) {
- extcnf_ctrl = er32(EXTCNF_CTRL);
- extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
-
- extcnf_ctrl = er32(EXTCNF_CTRL);
- if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
- break;
- mdelay(1);
- timeout--;
- }
-
- if (!timeout) {
- DEBUGOUT("FW or HW locks the resource too long.\n");
- return -E1000_ERR_CONFIG;
- }
- }
-
- return E1000_SUCCESS;
+ s32 ret_val;
+ u16 eeprom_data;
+
+ DEBUGFUNC("e1000_set_phy_mode");
+
+ if ((hw->mac_type == e1000_82545_rev_3) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ ret_val =
+ e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1,
+ &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+ (eeprom_data & EEPROM_PHY_CLASS_A)) {
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT,
+ 0x000B);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL,
+ 0x8104);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_reset_disable = false;
+ }
+ }
+
+ return E1000_SUCCESS;
}
-/***************************************************************************
- *
- * Release software semaphore FLAG bit (SWFLAG).
- * SWFLAG is used to synchronize the access to all shared resource between
- * SW, FW and HW.
+/**
+ * e1000_set_d3_lplu_state - set d3 link power state
+ * @hw: Struct containing variables accessed by shared code
+ * @active: true to enable lplu false to disable lplu.
*
- * hw: Struct containing variables accessed by shared code
+ * This function sets the lplu state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisement
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
*
- ***************************************************************************/
-static void e1000_release_software_flag(struct e1000_hw *hw)
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
{
- u32 extcnf_ctrl;
+ s32 ret_val;
+ u16 phy_data;
+ DEBUGFUNC("e1000_set_d3_lplu_state");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ /* During driver activity LPLU should not be used or it will attain link
+ * from the lowest speeds starting from 10Mbps. The capability is used for
+ * Dx transitions and states */
+ if (hw->mac_type == e1000_82541_rev_2
+ || hw->mac_type == e1000_82547_rev_2) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
+ if (ret_val)
+ return ret_val;
+ }
- DEBUGFUNC("e1000_release_software_flag");
+ if (!active) {
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
- if (hw->mac_type == e1000_ich8lan) {
- extcnf_ctrl= er32(EXTCNF_CTRL);
- extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
- }
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT)
+ || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL)
+ || (hw->autoneg_advertised ==
+ AUTONEG_ADVERTISE_10_100_ALL)) {
+
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data |= IGP01E1000_GMII_FLEX_SPD;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
- return;
-}
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
-/******************************************************************************
- * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access
- * register.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of word in the EEPROM to read
- * data - word read from the EEPROM
- * words - number of words to read
- *****************************************************************************/
-static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- s32 error = E1000_SUCCESS;
- u32 flash_bank = 0;
- u32 act_offset = 0;
- u32 bank_offset = 0;
- u16 word = 0;
- u16 i = 0;
-
- /* We need to know which is the valid flash bank. In the event
- * that we didn't allocate eeprom_shadow_ram, we may not be
- * managing flash_bank. So it cannot be trusted and needs
- * to be updated with each read.
- */
- /* Value of bit 22 corresponds to the flash bank we're on. */
- flash_bank = (er32(EECD) & E1000_EECD_SEC1VAL) ? 1 : 0;
-
- /* Adjust offset appropriately if we're on bank 1 - adjust for word size */
- bank_offset = flash_bank * (hw->flash_bank_size * 2);
-
- error = e1000_get_software_flag(hw);
- if (error != E1000_SUCCESS)
- return error;
-
- for (i = 0; i < words; i++) {
- if (hw->eeprom_shadow_ram != NULL &&
- hw->eeprom_shadow_ram[offset+i].modified) {
- data[i] = hw->eeprom_shadow_ram[offset+i].eeprom_word;
- } else {
- /* The NVM part needs a byte offset, hence * 2 */
- act_offset = bank_offset + ((offset + i) * 2);
- error = e1000_read_ich8_word(hw, act_offset, &word);
- if (error != E1000_SUCCESS)
- break;
- data[i] = word;
- }
- }
-
- e1000_release_software_flag(hw);
-
- return error;
-}
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
-/******************************************************************************
- * Writes a 16 bit word or words to the EEPROM using the ICH8's flash access
- * register. Actually, writes are written to the shadow ram cache in the hw
- * structure hw->e1000_shadow_ram. e1000_commit_shadow_ram flushes this to
- * the NVM, which occurs when the NVM checksum is updated.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of word in the EEPROM to write
- * words - number of words to write
- * data - words to write to the EEPROM
- *****************************************************************************/
-static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- u32 i = 0;
- s32 error = E1000_SUCCESS;
-
- error = e1000_get_software_flag(hw);
- if (error != E1000_SUCCESS)
- return error;
-
- /* A driver can write to the NVM only if it has eeprom_shadow_ram
- * allocated. Subsequent reads to the modified words are read from
- * this cached structure as well. Writes will only go into this
- * cached structure unless it's followed by a call to
- * e1000_update_eeprom_checksum() where it will commit the changes
- * and clear the "modified" field.
- */
- if (hw->eeprom_shadow_ram != NULL) {
- for (i = 0; i < words; i++) {
- if ((offset + i) < E1000_SHADOW_RAM_WORDS) {
- hw->eeprom_shadow_ram[offset+i].modified = true;
- hw->eeprom_shadow_ram[offset+i].eeprom_word = data[i];
- } else {
- error = -E1000_ERR_EEPROM;
- break;
- }
- }
- } else {
- /* Drivers have the option to not allocate eeprom_shadow_ram as long
- * as they don't perform any NVM writes. An attempt in doing so
- * will result in this error.
- */
- error = -E1000_ERR_EEPROM;
- }
-
- e1000_release_software_flag(hw);
-
- return error;
+ }
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * This function does initial flash setup so that a new read/write/erase cycle
- * can be started.
+/**
+ * e1000_set_vco_speed
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - The pointer to the hw structure
- ****************************************************************************/
-static s32 e1000_ich8_cycle_init(struct e1000_hw *hw)
+ * Change VCO speed register to improve Bit Error Rate performance of SERDES.
+ */
+static s32 e1000_set_vco_speed(struct e1000_hw *hw)
{
- union ich8_hws_flash_status hsfsts;
- s32 error = E1000_ERR_EEPROM;
- s32 i = 0;
-
- DEBUGFUNC("e1000_ich8_cycle_init");
-
- hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-
- /* May be check the Flash Des Valid bit in Hw status */
- if (hsfsts.hsf_status.fldesvalid == 0) {
- DEBUGOUT("Flash descriptor invalid. SW Sequencing must be used.");
- return error;
- }
-
- /* Clear FCERR in Hw status by writing 1 */
- /* Clear DAEL in Hw status by writing a 1 */
- hsfsts.hsf_status.flcerr = 1;
- hsfsts.hsf_status.dael = 1;
-
- E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
-
- /* Either we should have a hardware SPI cycle in progress bit to check
- * against, in order to start a new cycle or FDONE bit should be changed
- * in the hardware so that it is 1 after harware reset, which can then be
- * used as an indication whether a cycle is in progress or has been
- * completed .. we should also have some software semaphore mechanism to
- * guard FDONE or the cycle in progress bit so that two threads access to
- * those bits can be sequentiallized or a way so that 2 threads dont
- * start the cycle at the same time */
-
- if (hsfsts.hsf_status.flcinprog == 0) {
- /* There is no cycle running at present, so we can start a cycle */
- /* Begin by setting Flash Cycle Done. */
- hsfsts.hsf_status.flcdone = 1;
- E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
- error = E1000_SUCCESS;
- } else {
- /* otherwise poll for sometime so the current cycle has a chance
- * to end before giving up. */
- for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) {
- hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcinprog == 0) {
- error = E1000_SUCCESS;
- break;
- }
- udelay(1);
- }
- if (error == E1000_SUCCESS) {
- /* Successful in waiting for previous cycle to timeout,
- * now set the Flash Cycle Done. */
- hsfsts.hsf_status.flcdone = 1;
- E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval);
- } else {
- DEBUGOUT("Flash controller busy, cannot get access");
- }
- }
- return error;
-}
+ s32 ret_val;
+ u16 default_page = 0;
+ u16 phy_data;
-/******************************************************************************
- * This function starts a flash cycle and waits for its completion
- *
- * hw - The pointer to the hw structure
- ****************************************************************************/
-static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout)
-{
- union ich8_hws_flash_ctrl hsflctl;
- union ich8_hws_flash_status hsfsts;
- s32 error = E1000_ERR_EEPROM;
- u32 i = 0;
-
- /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
- hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
- hsflctl.hsf_ctrl.flcgo = 1;
- E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
-
- /* wait till FDONE bit is set to 1 */
- do {
- hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcdone == 1)
- break;
- udelay(1);
- i++;
- } while (i < timeout);
- if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0) {
- error = E1000_SUCCESS;
- }
- return error;
-}
+ DEBUGFUNC("e1000_set_vco_speed");
-/******************************************************************************
- * Reads a byte or word from the NVM using the ICH8 flash access registers.
- *
- * hw - The pointer to the hw structure
- * index - The index of the byte or word to read.
- * size - Size of data to read, 1=byte 2=word
- * data - Pointer to the word to store the value read.
- *****************************************************************************/
-static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
- u16 *data)
-{
- union ich8_hws_flash_status hsfsts;
- union ich8_hws_flash_ctrl hsflctl;
- u32 flash_linear_address;
- u32 flash_data = 0;
- s32 error = -E1000_ERR_EEPROM;
- s32 count = 0;
-
- DEBUGFUNC("e1000_read_ich8_data");
-
- if (size < 1 || size > 2 || data == NULL ||
- index > ICH_FLASH_LINEAR_ADDR_MASK)
- return error;
-
- flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
- hw->flash_base_addr;
-
- do {
- udelay(1);
- /* Steps */
- error = e1000_ich8_cycle_init(hw);
- if (error != E1000_SUCCESS)
- break;
-
- hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
- /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size - 1;
- hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
- E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
-
- /* Write the last 24 bits of index into Flash Linear address field in
- * Flash Address */
- /* TODO: TBD maybe check the index against the size of flash */
-
- E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
-
- error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
-
- /* Check if FCERR is set to 1, if set to 1, clear it and try the whole
- * sequence a few more times, else read in (shift in) the Flash Data0,
- * the order is least significant byte first msb to lsb */
- if (error == E1000_SUCCESS) {
- flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0);
- if (size == 1) {
- *data = (u8)(flash_data & 0x000000FF);
- } else if (size == 2) {
- *data = (u16)(flash_data & 0x0000FFFF);
- }
- break;
- } else {
- /* If we've gotten here, then things are probably completely hosed,
- * but if the error condition is detected, it won't hurt to give
- * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
- */
- hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1) {
- /* Repeat for some time before giving up. */
- continue;
- } else if (hsfsts.hsf_status.flcdone == 0) {
- DEBUGOUT("Timeout error - flash cycle did not complete.");
- break;
- }
- }
- } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
-
- return error;
-}
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
-/******************************************************************************
- * Writes One /two bytes to the NVM using the ICH8 flash access registers.
- *
- * hw - The pointer to the hw structure
- * index - The index of the byte/word to read.
- * size - Size of data to read, 1=byte 2=word
- * data - The byte(s) to write to the NVM.
- *****************************************************************************/
-static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size,
- u16 data)
-{
- union ich8_hws_flash_status hsfsts;
- union ich8_hws_flash_ctrl hsflctl;
- u32 flash_linear_address;
- u32 flash_data = 0;
- s32 error = -E1000_ERR_EEPROM;
- s32 count = 0;
-
- DEBUGFUNC("e1000_write_ich8_data");
-
- if (size < 1 || size > 2 || data > size * 0xff ||
- index > ICH_FLASH_LINEAR_ADDR_MASK)
- return error;
-
- flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) +
- hw->flash_base_addr;
-
- do {
- udelay(1);
- /* Steps */
- error = e1000_ich8_cycle_init(hw);
- if (error != E1000_SUCCESS)
- break;
-
- hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
- /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size -1;
- hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
- E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
-
- /* Write the last 24 bits of index into Flash Linear address field in
- * Flash Address */
- E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
-
- if (size == 1)
- flash_data = (u32)data & 0x00FF;
- else
- flash_data = (u32)data;
-
- E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data);
-
- /* check if FCERR is set to 1 , if set to 1, clear it and try the whole
- * sequence a few more times else done */
- error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT);
- if (error == E1000_SUCCESS) {
- break;
- } else {
- /* If we're here, then things are most likely completely hosed,
- * but if the error condition is detected, it won't hurt to give
- * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
- */
- hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1) {
- /* Repeat for some time before giving up. */
- continue;
- } else if (hsfsts.hsf_status.flcdone == 0) {
- DEBUGOUT("Timeout error - flash cycle did not complete.");
- break;
- }
- }
- } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
-
- return error;
-}
+ /* Set PHY register 30, page 5, bit 8 to 0 */
-/******************************************************************************
- * Reads a single byte from the NVM using the ICH8 flash access registers.
- *
- * hw - pointer to e1000_hw structure
- * index - The index of the byte to read.
- * data - Pointer to a byte to store the value read.
- *****************************************************************************/
-static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data)
-{
- s32 status = E1000_SUCCESS;
- u16 word = 0;
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
+ if (ret_val)
+ return ret_val;
- status = e1000_read_ich8_data(hw, index, 1, &word);
- if (status == E1000_SUCCESS) {
- *data = (u8)word;
- }
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
+ if (ret_val)
+ return ret_val;
- return status;
-}
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
-/******************************************************************************
- * Writes a single byte to the NVM using the ICH8 flash access registers.
- * Performs verification by reading back the value and then going through
- * a retry algorithm before giving up.
- *
- * hw - pointer to e1000_hw structure
- * index - The index of the byte to write.
- * byte - The byte to write to the NVM.
- *****************************************************************************/
-static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte)
-{
- s32 error = E1000_SUCCESS;
- s32 program_retries = 0;
+ phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Set PHY register 30, page 4, bit 11 to 1 */
- DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
+ if (ret_val)
+ return ret_val;
- error = e1000_write_ich8_byte(hw, index, byte);
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
- if (error != E1000_SUCCESS) {
- for (program_retries = 0; program_retries < 100; program_retries++) {
- DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index);
- error = e1000_write_ich8_byte(hw, index, byte);
- udelay(100);
- if (error == E1000_SUCCESS)
- break;
- }
- }
+ phy_data |= M88E1000_PHY_VCO_REG_BIT11;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
- if (program_retries == 100)
- error = E1000_ERR_EEPROM;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
+ if (ret_val)
+ return ret_val;
- return error;
+ return E1000_SUCCESS;
}
-/******************************************************************************
- * Writes a single byte to the NVM using the ICH8 flash access registers.
+
+/**
+ * e1000_enable_mng_pass_thru - check for bmc pass through
+ * @hw: Struct containing variables accessed by shared code
*
- * hw - pointer to e1000_hw structure
- * index - The index of the byte to read.
- * data - The byte to write to the NVM.
- *****************************************************************************/
-static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data)
+ * Verifies the hardware needs to allow ARPs to be processed by the host
+ * returns: - true/false
+ */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
{
- s32 status = E1000_SUCCESS;
- u16 word = (u16)data;
+ u32 manc;
- status = e1000_write_ich8_data(hw, index, 1, word);
+ if (hw->asf_firmware_present) {
+ manc = er32(MANC);
- return status;
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ return false;
+ if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
+ return true;
+ }
+ return false;
}
-/******************************************************************************
- * Reads a word from the NVM using the ICH8 flash access registers.
- *
- * hw - pointer to e1000_hw structure
- * index - The starting byte index of the word to read.
- * data - Pointer to a word to store the value read.
- *****************************************************************************/
-static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data)
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
{
- s32 status = E1000_SUCCESS;
- status = e1000_read_ich8_data(hw, index, 2, data);
- return status;
-}
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 i;
-/******************************************************************************
- * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0
- * based.
- *
- * hw - pointer to e1000_hw structure
- * bank - 0 for first bank, 1 for second bank
- *
- * Note that this function may actually erase as much as 8 or 64 KBytes. The
- * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the
- * bank size may be 4, 8 or 64 KBytes
- *****************************************************************************/
-static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank)
-{
- union ich8_hws_flash_status hsfsts;
- union ich8_hws_flash_ctrl hsflctl;
- u32 flash_linear_address;
- s32 count = 0;
- s32 error = E1000_ERR_EEPROM;
- s32 iteration;
- s32 sub_sector_size = 0;
- s32 bank_size;
- s32 j = 0;
- s32 error_flag = 0;
-
- hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
-
- /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */
- /* 00: The Hw sector is 256 bytes, hence we need to erase 16
- * consecutive sectors. The start index for the nth Hw sector can be
- * calculated as bank * 4096 + n * 256
- * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
- * The start index for the nth Hw sector can be calculated
- * as bank * 4096
- * 10: The HW sector is 8K bytes
- * 11: The Hw sector size is 64K bytes */
- if (hsfsts.hsf_status.berasesz == 0x0) {
- /* Hw sector size 256 */
- sub_sector_size = ICH_FLASH_SEG_SIZE_256;
- bank_size = ICH_FLASH_SECTOR_SIZE;
- iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256;
- } else if (hsfsts.hsf_status.berasesz == 0x1) {
- bank_size = ICH_FLASH_SEG_SIZE_4K;
- iteration = 1;
- } else if (hsfsts.hsf_status.berasesz == 0x3) {
- bank_size = ICH_FLASH_SEG_SIZE_64K;
- iteration = 1;
- } else {
- return error;
- }
-
- for (j = 0; j < iteration ; j++) {
- do {
- count++;
- /* Steps */
- error = e1000_ich8_cycle_init(hw);
- if (error != E1000_SUCCESS) {
- error_flag = 1;
- break;
- }
-
- /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash
- * Control */
- hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL);
- hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
- E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval);
-
- /* Write the last 24 bits of an index within the block into Flash
- * Linear address field in Flash Address. This probably needs to
- * be calculated here based off the on-chip erase sector size and
- * the software bank size (4, 8 or 64 KBytes) */
- flash_linear_address = bank * bank_size + j * sub_sector_size;
- flash_linear_address += hw->flash_base_addr;
- flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK;
-
- E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address);
-
- error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT);
- /* Check if FCERR is set to 1. If 1, clear it and try the whole
- * sequence a few more times else Done */
- if (error == E1000_SUCCESS) {
- break;
- } else {
- hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1) {
- /* repeat for some time before giving up */
- continue;
- } else if (hsfsts.hsf_status.flcdone == 0) {
- error_flag = 1;
- break;
- }
- }
- } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag);
- if (error_flag == 1)
- break;
- }
- if (error_flag != 1)
- error = E1000_SUCCESS;
- return error;
-}
+ /* Polarity reversal workaround for forced 10F/10H links. */
-static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw,
- u32 cnf_base_addr,
- u32 cnf_size)
-{
- u32 ret_val = E1000_SUCCESS;
- u16 word_addr, reg_data, reg_addr;
- u16 i;
+ /* Disable the transmitter on the PHY */
- /* cnf_base_addr is in DWORD */
- word_addr = (u16)(cnf_base_addr << 1);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
+ if (ret_val)
+ return ret_val;
- /* cnf_size is returned in size of dwords */
- for (i = 0; i < cnf_size; i++) {
- ret_val = e1000_read_eeprom(hw, (word_addr + i*2), 1, ®_data);
- if (ret_val)
- return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
- ret_val = e1000_read_eeprom(hw, (word_addr + i*2 + 1), 1, ®_addr);
- if (ret_val)
- return ret_val;
+ /* This loop will early-out if the NO link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be clear.
+ */
- ret_val = e1000_get_software_flag(hw);
- if (ret_val != E1000_SUCCESS)
- return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
- ret_val = e1000_write_phy_reg_ex(hw, (u32)reg_addr, reg_data);
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
- e1000_release_software_flag(hw);
- }
+ if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0)
+ break;
+ mdelay(100);
+ }
- return ret_val;
+ /* Recommended delay time after link has been lost */
+ mdelay(1000);
+
+ /* Now we will re-enable th transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be set.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ mdelay(100);
+ }
+ return E1000_SUCCESS;
}
-
-/******************************************************************************
- * This function initializes the PHY from the NVM on ICH8 platforms. This
- * is needed due to an issue where the NVM configuration is not properly
- * autoloaded after power transitions. Therefore, after each PHY reset, we
- * will load the configuration data out of the NVM manually.
+/**
+ * e1000_get_auto_rd_done
+ * @hw: Struct containing variables accessed by shared code
*
- * hw: Struct containing variables accessed by shared code
- *****************************************************************************/
-static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw)
+ * Check for EEPROM Auto Read bit done.
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
{
- u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop;
-
- if (hw->phy_type != e1000_phy_igp_3)
- return E1000_SUCCESS;
-
- /* Check if SW needs configure the PHY */
- reg_data = er32(FEXTNVM);
- if (!(reg_data & FEXTNVM_SW_CONFIG))
- return E1000_SUCCESS;
-
- /* Wait for basic configuration completes before proceeding*/
- loop = 0;
- do {
- reg_data = er32(STATUS) & E1000_STATUS_LAN_INIT_DONE;
- udelay(100);
- loop++;
- } while ((!reg_data) && (loop < 50));
-
- /* Clear the Init Done bit for the next init event */
- reg_data = er32(STATUS);
- reg_data &= ~E1000_STATUS_LAN_INIT_DONE;
- ew32(STATUS, reg_data);
-
- /* Make sure HW does not configure LCD from PHY extended configuration
- before SW configuration */
- reg_data = er32(EXTCNF_CTRL);
- if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) {
- reg_data = er32(EXTCNF_SIZE);
- cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH;
- cnf_size >>= 16;
- if (cnf_size) {
- reg_data = er32(EXTCNF_CTRL);
- cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER;
- /* cnf_base_addr is in DWORD */
- cnf_base_addr >>= 16;
-
- /* Configure LCD from extended configuration region. */
- ret_val = e1000_init_lcd_from_nvm_config_region(hw, cnf_base_addr,
- cnf_size);
- if (ret_val)
- return ret_val;
- }
- }
-
- return E1000_SUCCESS;
+ DEBUGFUNC("e1000_get_auto_rd_done");
+ msleep(5);
+ return E1000_SUCCESS;
}
+/**
+ * e1000_get_phy_cfg_done
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Checks if the PHY configuration is done
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_get_phy_cfg_done");
+ mdelay(10);
+ return E1000_SUCCESS;
+}
#include "e1000_osdep.h"
-
/* Forward declarations of structures used by the shared code */
struct e1000_hw;
struct e1000_hw_stats;
/* Enumerated types specific to the e1000 hardware */
/* Media Access Controlers */
typedef enum {
- e1000_undefined = 0,
- e1000_82542_rev2_0,
- e1000_82542_rev2_1,
- e1000_82543,
- e1000_82544,
- e1000_82540,
- e1000_82545,
- e1000_82545_rev_3,
- e1000_82546,
- e1000_82546_rev_3,
- e1000_82541,
- e1000_82541_rev_2,
- e1000_82547,
- e1000_82547_rev_2,
- e1000_82571,
- e1000_82572,
- e1000_82573,
- e1000_80003es2lan,
- e1000_ich8lan,
- e1000_num_macs
+ e1000_undefined = 0,
+ e1000_82542_rev2_0,
+ e1000_82542_rev2_1,
+ e1000_82543,
+ e1000_82544,
+ e1000_82540,
+ e1000_82545,
+ e1000_82545_rev_3,
+ e1000_82546,
+ e1000_82546_rev_3,
+ e1000_82541,
+ e1000_82541_rev_2,
+ e1000_82547,
+ e1000_82547_rev_2,
+ e1000_num_macs
} e1000_mac_type;
typedef enum {
- e1000_eeprom_uninitialized = 0,
- e1000_eeprom_spi,
- e1000_eeprom_microwire,
- e1000_eeprom_flash,
- e1000_eeprom_ich8,
- e1000_eeprom_none, /* No NVM support */
- e1000_num_eeprom_types
+ e1000_eeprom_uninitialized = 0,
+ e1000_eeprom_spi,
+ e1000_eeprom_microwire,
+ e1000_eeprom_flash,
+ e1000_eeprom_none, /* No NVM support */
+ e1000_num_eeprom_types
} e1000_eeprom_type;
/* Media Types */
typedef enum {
- e1000_media_type_copper = 0,
- e1000_media_type_fiber = 1,
- e1000_media_type_internal_serdes = 2,
- e1000_num_media_types
+ e1000_media_type_copper = 0,
+ e1000_media_type_fiber = 1,
+ e1000_media_type_internal_serdes = 2,
+ e1000_num_media_types
} e1000_media_type;
typedef enum {
- e1000_10_half = 0,
- e1000_10_full = 1,
- e1000_100_half = 2,
- e1000_100_full = 3
+ e1000_10_half = 0,
+ e1000_10_full = 1,
+ e1000_100_half = 2,
+ e1000_100_full = 3
} e1000_speed_duplex_type;
/* Flow Control Settings */
typedef enum {
- E1000_FC_NONE = 0,
- E1000_FC_RX_PAUSE = 1,
- E1000_FC_TX_PAUSE = 2,
- E1000_FC_FULL = 3,
- E1000_FC_DEFAULT = 0xFF
+ E1000_FC_NONE = 0,
+ E1000_FC_RX_PAUSE = 1,
+ E1000_FC_TX_PAUSE = 2,
+ E1000_FC_FULL = 3,
+ E1000_FC_DEFAULT = 0xFF
} e1000_fc_type;
struct e1000_shadow_ram {
- u16 eeprom_word;
- bool modified;
+ u16 eeprom_word;
+ bool modified;
};
/* PCI bus types */
typedef enum {
- e1000_bus_type_unknown = 0,
- e1000_bus_type_pci,
- e1000_bus_type_pcix,
- e1000_bus_type_pci_express,
- e1000_bus_type_reserved
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_reserved
} e1000_bus_type;
/* PCI bus speeds */
typedef enum {
- e1000_bus_speed_unknown = 0,
- e1000_bus_speed_33,
- e1000_bus_speed_66,
- e1000_bus_speed_100,
- e1000_bus_speed_120,
- e1000_bus_speed_133,
- e1000_bus_speed_2500,
- e1000_bus_speed_reserved
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_reserved
} e1000_bus_speed;
/* PCI bus widths */
typedef enum {
- e1000_bus_width_unknown = 0,
- /* These PCIe values should literally match the possible return values
- * from config space */
- e1000_bus_width_pciex_1 = 1,
- e1000_bus_width_pciex_2 = 2,
- e1000_bus_width_pciex_4 = 4,
- e1000_bus_width_32,
- e1000_bus_width_64,
- e1000_bus_width_reserved
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
} e1000_bus_width;
/* PHY status info structure and supporting enums */
typedef enum {
- e1000_cable_length_50 = 0,
- e1000_cable_length_50_80,
- e1000_cable_length_80_110,
- e1000_cable_length_110_140,
- e1000_cable_length_140,
- e1000_cable_length_undefined = 0xFF
+ e1000_cable_length_50 = 0,
+ e1000_cable_length_50_80,
+ e1000_cable_length_80_110,
+ e1000_cable_length_110_140,
+ e1000_cable_length_140,
+ e1000_cable_length_undefined = 0xFF
} e1000_cable_length;
typedef enum {
- e1000_gg_cable_length_60 = 0,
- e1000_gg_cable_length_60_115 = 1,
- e1000_gg_cable_length_115_150 = 2,
- e1000_gg_cable_length_150 = 4
+ e1000_gg_cable_length_60 = 0,
+ e1000_gg_cable_length_60_115 = 1,
+ e1000_gg_cable_length_115_150 = 2,
+ e1000_gg_cable_length_150 = 4
} e1000_gg_cable_length;
typedef enum {
- e1000_igp_cable_length_10 = 10,
- e1000_igp_cable_length_20 = 20,
- e1000_igp_cable_length_30 = 30,
- e1000_igp_cable_length_40 = 40,
- e1000_igp_cable_length_50 = 50,
- e1000_igp_cable_length_60 = 60,
- e1000_igp_cable_length_70 = 70,
- e1000_igp_cable_length_80 = 80,
- e1000_igp_cable_length_90 = 90,
- e1000_igp_cable_length_100 = 100,
- e1000_igp_cable_length_110 = 110,
- e1000_igp_cable_length_115 = 115,
- e1000_igp_cable_length_120 = 120,
- e1000_igp_cable_length_130 = 130,
- e1000_igp_cable_length_140 = 140,
- e1000_igp_cable_length_150 = 150,
- e1000_igp_cable_length_160 = 160,
- e1000_igp_cable_length_170 = 170,
- e1000_igp_cable_length_180 = 180
+ e1000_igp_cable_length_10 = 10,
+ e1000_igp_cable_length_20 = 20,
+ e1000_igp_cable_length_30 = 30,
+ e1000_igp_cable_length_40 = 40,
+ e1000_igp_cable_length_50 = 50,
+ e1000_igp_cable_length_60 = 60,
+ e1000_igp_cable_length_70 = 70,
+ e1000_igp_cable_length_80 = 80,
+ e1000_igp_cable_length_90 = 90,
+ e1000_igp_cable_length_100 = 100,
+ e1000_igp_cable_length_110 = 110,
+ e1000_igp_cable_length_115 = 115,
+ e1000_igp_cable_length_120 = 120,
+ e1000_igp_cable_length_130 = 130,
+ e1000_igp_cable_length_140 = 140,
+ e1000_igp_cable_length_150 = 150,
+ e1000_igp_cable_length_160 = 160,
+ e1000_igp_cable_length_170 = 170,
+ e1000_igp_cable_length_180 = 180
} e1000_igp_cable_length;
typedef enum {
- e1000_10bt_ext_dist_enable_normal = 0,
- e1000_10bt_ext_dist_enable_lower,
- e1000_10bt_ext_dist_enable_undefined = 0xFF
+ e1000_10bt_ext_dist_enable_normal = 0,
+ e1000_10bt_ext_dist_enable_lower,
+ e1000_10bt_ext_dist_enable_undefined = 0xFF
} e1000_10bt_ext_dist_enable;
typedef enum {
- e1000_rev_polarity_normal = 0,
- e1000_rev_polarity_reversed,
- e1000_rev_polarity_undefined = 0xFF
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
} e1000_rev_polarity;
typedef enum {
- e1000_downshift_normal = 0,
- e1000_downshift_activated,
- e1000_downshift_undefined = 0xFF
+ e1000_downshift_normal = 0,
+ e1000_downshift_activated,
+ e1000_downshift_undefined = 0xFF
} e1000_downshift;
typedef enum {
- e1000_smart_speed_default = 0,
- e1000_smart_speed_on,
- e1000_smart_speed_off
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
} e1000_smart_speed;
typedef enum {
- e1000_polarity_reversal_enabled = 0,
- e1000_polarity_reversal_disabled,
- e1000_polarity_reversal_undefined = 0xFF
+ e1000_polarity_reversal_enabled = 0,
+ e1000_polarity_reversal_disabled,
+ e1000_polarity_reversal_undefined = 0xFF
} e1000_polarity_reversal;
typedef enum {
- e1000_auto_x_mode_manual_mdi = 0,
- e1000_auto_x_mode_manual_mdix,
- e1000_auto_x_mode_auto1,
- e1000_auto_x_mode_auto2,
- e1000_auto_x_mode_undefined = 0xFF
+ e1000_auto_x_mode_manual_mdi = 0,
+ e1000_auto_x_mode_manual_mdix,
+ e1000_auto_x_mode_auto1,
+ e1000_auto_x_mode_auto2,
+ e1000_auto_x_mode_undefined = 0xFF
} e1000_auto_x_mode;
typedef enum {
- e1000_1000t_rx_status_not_ok = 0,
- e1000_1000t_rx_status_ok,
- e1000_1000t_rx_status_undefined = 0xFF
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
} e1000_1000t_rx_status;
typedef enum {
e1000_phy_m88 = 0,
e1000_phy_igp,
- e1000_phy_igp_2,
- e1000_phy_gg82563,
- e1000_phy_igp_3,
- e1000_phy_ife,
e1000_phy_undefined = 0xFF
} e1000_phy_type;
typedef enum {
- e1000_ms_hw_default = 0,
- e1000_ms_force_master,
- e1000_ms_force_slave,
- e1000_ms_auto
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
} e1000_ms_type;
typedef enum {
- e1000_ffe_config_enabled = 0,
- e1000_ffe_config_active,
- e1000_ffe_config_blocked
+ e1000_ffe_config_enabled = 0,
+ e1000_ffe_config_active,
+ e1000_ffe_config_blocked
} e1000_ffe_config;
typedef enum {
- e1000_dsp_config_disabled = 0,
- e1000_dsp_config_enabled,
- e1000_dsp_config_activated,
- e1000_dsp_config_undefined = 0xFF
+ e1000_dsp_config_disabled = 0,
+ e1000_dsp_config_enabled,
+ e1000_dsp_config_activated,
+ e1000_dsp_config_undefined = 0xFF
} e1000_dsp_config;
struct e1000_phy_info {
- e1000_cable_length cable_length;
- e1000_10bt_ext_dist_enable extended_10bt_distance;
- e1000_rev_polarity cable_polarity;
- e1000_downshift downshift;
- e1000_polarity_reversal polarity_correction;
- e1000_auto_x_mode mdix_mode;
- e1000_1000t_rx_status local_rx;
- e1000_1000t_rx_status remote_rx;
+ e1000_cable_length cable_length;
+ e1000_10bt_ext_dist_enable extended_10bt_distance;
+ e1000_rev_polarity cable_polarity;
+ e1000_downshift downshift;
+ e1000_polarity_reversal polarity_correction;
+ e1000_auto_x_mode mdix_mode;
+ e1000_1000t_rx_status local_rx;
+ e1000_1000t_rx_status remote_rx;
};
struct e1000_phy_stats {
- u32 idle_errors;
- u32 receive_errors;
+ u32 idle_errors;
+ u32 receive_errors;
};
struct e1000_eeprom_info {
- e1000_eeprom_type type;
- u16 word_size;
- u16 opcode_bits;
- u16 address_bits;
- u16 delay_usec;
- u16 page_size;
- bool use_eerd;
- bool use_eewr;
+ e1000_eeprom_type type;
+ u16 word_size;
+ u16 opcode_bits;
+ u16 address_bits;
+ u16 delay_usec;
+ u16 page_size;
};
/* Flex ASF Information */
#define E1000_HOST_IF_MAX_SIZE 2048
typedef enum {
- e1000_byte_align = 0,
- e1000_word_align = 1,
- e1000_dword_align = 2
+ e1000_byte_align = 0,
+ e1000_word_align = 1,
+ e1000_dword_align = 2
} e1000_align_type;
-
-
/* Error Codes */
#define E1000_SUCCESS 0
#define E1000_ERR_EEPROM 1
#define E1000_ERR_MASTER_REQUESTS_PENDING 10
#define E1000_ERR_HOST_INTERFACE_COMMAND 11
#define E1000_BLK_PHY_RESET 12
-#define E1000_ERR_SWFW_SYNC 13
#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
(((_value) & 0xff00) >> 8))
s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
void e1000_config_collision_dist(struct e1000_hw *hw);
s32 e1000_check_for_link(struct e1000_hw *hw);
-s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
s32 e1000_force_mac_fc(struct e1000_hw *hw);
/* PHY */
-s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data);
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
s32 e1000_phy_hw_reset(struct e1000_hw *hw);
s32 e1000_phy_reset(struct e1000_hw *hw);
s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
-void e1000_phy_powerdown_workaround(struct e1000_hw *hw);
-
/* EEPROM Functions */
s32 e1000_init_eeprom_params(struct e1000_hw *hw);
u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
-#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
-#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
-#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
-#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
#define E1000_MNG_IAMT_MODE 0x3
#define E1000_MNG_ICH_IAMT_MODE 0x2
-#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
+#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
-#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
-#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
#define E1000_VFTA_ENTRY_SHIFT 0x5
#define E1000_VFTA_ENTRY_MASK 0x7F
#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
struct e1000_host_mng_command_header {
- u8 command_id;
- u8 checksum;
- u16 reserved1;
- u16 reserved2;
- u16 command_length;
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
};
struct e1000_host_mng_command_info {
- struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
- u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/
+ struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */
};
#ifdef __BIG_ENDIAN
-struct e1000_host_mng_dhcp_cookie{
- u32 signature;
- u16 vlan_id;
- u8 reserved0;
- u8 status;
- u32 reserved1;
- u8 checksum;
- u8 reserved3;
- u16 reserved2;
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u16 vlan_id;
+ u8 reserved0;
+ u8 status;
+ u32 reserved1;
+ u8 checksum;
+ u8 reserved3;
+ u16 reserved2;
};
#else
-struct e1000_host_mng_dhcp_cookie{
- u32 signature;
- u8 status;
- u8 reserved0;
- u16 vlan_id;
- u32 reserved1;
- u16 reserved2;
- u8 reserved3;
- u8 checksum;
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
};
#endif
-s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer,
- u16 length);
bool e1000_check_mng_mode(struct e1000_hw *hw);
-bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw);
-s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
-s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 *data);
-s32 e1000_read_mac_addr(struct e1000_hw * hw);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_read_mac_addr(struct e1000_hw *hw);
/* Filters (multicast, vlan, receive) */
u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
/* Everything else */
void e1000_reset_adaptive(struct e1000_hw *hw);
void e1000_update_adaptive(struct e1000_hw *hw);
-void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, u32 frame_len, u8 * mac_addr);
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 * mac_addr);
void e1000_get_bus_info(struct e1000_hw *hw);
void e1000_pci_set_mwi(struct e1000_hw *hw);
void e1000_pci_clear_mwi(struct e1000_hw *hw);
-s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
/* Port I/O is only supported on 82544 and newer */
void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
-s32 e1000_disable_pciex_master(struct e1000_hw *hw);
-s32 e1000_check_phy_reset_block(struct e1000_hw *hw);
-
#define E1000_READ_REG_IO(a, reg) \
e1000_read_reg_io((a), E1000_##reg)
#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
#define E1000_DEV_ID_82547EI 0x1019
#define E1000_DEV_ID_82547EI_MOBILE 0x101A
-#define E1000_DEV_ID_82571EB_COPPER 0x105E
-#define E1000_DEV_ID_82571EB_FIBER 0x105F
-#define E1000_DEV_ID_82571EB_SERDES 0x1060
-#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
-#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
-#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
-#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC
-#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
-#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
-#define E1000_DEV_ID_82572EI_COPPER 0x107D
-#define E1000_DEV_ID_82572EI_FIBER 0x107E
-#define E1000_DEV_ID_82572EI_SERDES 0x107F
-#define E1000_DEV_ID_82572EI 0x10B9
-#define E1000_DEV_ID_82573E 0x108B
-#define E1000_DEV_ID_82573E_IAMT 0x108C
-#define E1000_DEV_ID_82573L 0x109A
#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
-#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
-#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
-#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
-#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
-
-#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
-#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
-#define E1000_DEV_ID_ICH8_IGP_C 0x104B
-#define E1000_DEV_ID_ICH8_IFE 0x104C
-#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4
-#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
-#define E1000_DEV_ID_ICH8_IGP_M 0x104D
-
#define NODE_ADDRESS_SIZE 6
#define ETH_LENGTH_OF_ADDRESS 6
/* The sizes (in bytes) of a ethernet packet */
#define ENET_HEADER_SIZE 14
-#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
+#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
#define ETHERNET_FCS_SIZE 4
#define MINIMUM_ETHERNET_PACKET_SIZE \
(MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
#define CRC_LENGTH ETHERNET_FCS_SIZE
#define MAX_JUMBO_FRAME_SIZE 0x3F00
-
/* 802.1q VLAN Packet Sizes */
-#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
/* Ethertype field values */
-#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
-#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
-#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
+#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
/* Packet Header defines */
#define IP_PROTOCOL_TCP 6
E1000_IMS_RXSEQ | \
E1000_IMS_LSC)
-/* Additional interrupts need to be handled for e1000_ich8lan:
- DSW = The FW changed the status of the DISSW bit in FWSM
- PHYINT = The LAN connected device generates an interrupt
- EPRST = Manageability reset event */
-#define IMS_ICH8LAN_ENABLE_MASK (\
- E1000_IMS_DSW | \
- E1000_IMS_PHYINT | \
- E1000_IMS_EPRST)
-
/* Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor. We
* reserve one of these spots for our directed address, allowing us room for
*/
#define E1000_RAR_ENTRIES 15
-#define E1000_RAR_ENTRIES_ICH8LAN 6
-
#define MIN_NUMBER_OF_DESCRIPTORS 8
#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
/* Receive Descriptor */
struct e1000_rx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- __le16 length; /* Length of data DMAed into data buffer */
- __le16 csum; /* Packet checksum */
- u8 status; /* Descriptor status */
- u8 errors; /* Descriptor Errors */
- __le16 special;
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ __le16 special;
};
/* Receive Descriptor - Extended */
union e1000_rx_desc_extended {
- struct {
- __le64 buffer_addr;
- __le64 reserved;
- } read;
- struct {
- struct {
- __le32 mrq; /* Multiple Rx Queues */
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length;
- __le16 vlan; /* VLAN tag */
- } upper;
- } wb; /* writeback */
+ struct {
+ __le64 buffer_addr;
+ __le64 reserved;
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length;
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
};
#define MAX_PS_BUFFERS 4
/* Receive Descriptor - Packet Split */
union e1000_rx_desc_packet_split {
- struct {
- /* one buffer for protocol header(s), three data buffers */
- __le64 buffer_addr[MAX_PS_BUFFERS];
- } read;
- struct {
- struct {
- __le32 mrq; /* Multiple Rx Queues */
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length0; /* length of buffer 0 */
- __le16 vlan; /* VLAN tag */
- } middle;
- struct {
- __le16 header_status;
- __le16 length[3]; /* length of buffers 1-3 */
- } upper;
- __le64 reserved;
- } wb; /* writeback */
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ __le64 buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
+ } middle;
+ struct {
+ __le16 header_status;
+ __le16 length[3]; /* length of buffers 1-3 */
+ } upper;
+ __le64 reserved;
+ } wb; /* writeback */
};
-/* Receive Decriptor bit definitions */
-#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
-#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
-#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */
-#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
-#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
-#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
-#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
-#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
-#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
-#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
-#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
-#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
-#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
-#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
-#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
-#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
-#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
#define E1000_RXD_SPC_PRI_SHIFT 13
-#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
#define E1000_RXD_SPC_CFI_SHIFT 12
#define E1000_RXDEXT_STATERR_CE 0x01000000
E1000_RXD_ERR_CXE | \
E1000_RXD_ERR_RXE)
-
/* Same mask, but for extended and packet split descriptors */
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
E1000_RXDEXT_STATERR_CE | \
E1000_RXDEXT_STATERR_CXE | \
E1000_RXDEXT_STATERR_RXE)
-
/* Transmit Descriptor */
struct e1000_tx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- union {
- __le32 data;
- struct {
- __le16 length; /* Data buffer length */
- u8 cso; /* Checksum offset */
- u8 cmd; /* Descriptor control */
- } flags;
- } lower;
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 css; /* Checksum start */
- __le16 special;
- } fields;
- } upper;
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ __le16 special;
+ } fields;
+ } upper;
};
/* Transmit Descriptor bit definitions */
-#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
-#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
-#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
-#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
-#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
-#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
-#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
-#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
-#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
-#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
-#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
/* Offload Context Descriptor */
struct e1000_context_desc {
- union {
- __le32 ip_config;
- struct {
- u8 ipcss; /* IP checksum start */
- u8 ipcso; /* IP checksum offset */
- __le16 ipcse; /* IP checksum end */
- } ip_fields;
- } lower_setup;
- union {
- __le32 tcp_config;
- struct {
- u8 tucss; /* TCP checksum start */
- u8 tucso; /* TCP checksum offset */
- __le16 tucse; /* TCP checksum end */
- } tcp_fields;
- } upper_setup;
- __le32 cmd_and_length; /* */
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 hdr_len; /* Header length */
- __le16 mss; /* Maximum segment size */
- } fields;
- } tcp_seg_setup;
+ union {
+ __le32 ip_config;
+ struct {
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ __le16 ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ __le32 tcp_config;
+ struct {
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ __le16 tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ __le32 cmd_and_length; /* */
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ __le16 mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
};
/* Offload data descriptor */
struct e1000_data_desc {
- __le64 buffer_addr; /* Address of the descriptor's buffer address */
- union {
- __le32 data;
- struct {
- __le16 length; /* Data buffer length */
- u8 typ_len_ext; /* */
- u8 cmd; /* */
- } flags;
- } lower;
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 popts; /* Packet Options */
- __le16 special; /* */
- } fields;
- } upper;
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 typ_len_ext; /* */
+ u8 cmd; /* */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ __le16 special; /* */
+ } fields;
+ } upper;
};
/* Filters */
-#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
-#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
-#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
-
-#define E1000_NUM_UNICAST_ICH8LAN 7
-#define E1000_MC_TBL_SIZE_ICH8LAN 32
-
+#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
+#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
/* Receive Address Register */
struct e1000_rar {
- volatile __le32 low; /* receive address low */
- volatile __le32 high; /* receive address high */
+ volatile __le32 low; /* receive address low */
+ volatile __le32 high; /* receive address high */
};
/* Number of entries in the Multicast Table Array (MTA). */
#define E1000_NUM_MTA_REGISTERS 128
-#define E1000_NUM_MTA_REGISTERS_ICH8LAN 32
/* IPv4 Address Table Entry */
struct e1000_ipv4_at_entry {
- volatile u32 ipv4_addr; /* IP Address (RW) */
- volatile u32 reserved;
+ volatile u32 ipv4_addr; /* IP Address (RW) */
+ volatile u32 reserved;
};
/* Four wakeup IP addresses are supported */
#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
-#define E1000_IP4AT_SIZE_ICH8LAN 3
#define E1000_IP6AT_SIZE 1
/* IPv6 Address Table Entry */
struct e1000_ipv6_at_entry {
- volatile u8 ipv6_addr[16];
+ volatile u8 ipv6_addr[16];
};
/* Flexible Filter Length Table Entry */
struct e1000_fflt_entry {
- volatile u32 length; /* Flexible Filter Length (RW) */
- volatile u32 reserved;
+ volatile u32 length; /* Flexible Filter Length (RW) */
+ volatile u32 reserved;
};
/* Flexible Filter Mask Table Entry */
struct e1000_ffmt_entry {
- volatile u32 mask; /* Flexible Filter Mask (RW) */
- volatile u32 reserved;
+ volatile u32 mask; /* Flexible Filter Mask (RW) */
+ volatile u32 reserved;
};
/* Flexible Filter Value Table Entry */
struct e1000_ffvt_entry {
- volatile u32 value; /* Flexible Filter Value (RW) */
- volatile u32 reserved;
+ volatile u32 value; /* Flexible Filter Value (RW) */
+ volatile u32 reserved;
};
/* Four Flexible Filters are supported */
* R/clr - register is read only and is cleared when read
* A - register array
*/
-#define E1000_CTRL 0x00000 /* Device Control - RW */
-#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
-#define E1000_STATUS 0x00008 /* Device Status - RO */
-#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
-#define E1000_EERD 0x00014 /* EEPROM Read - RW */
-#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
-#define E1000_FLA 0x0001C /* Flash Access - RW */
-#define E1000_MDIC 0x00020 /* MDI Control - RW */
-#define E1000_SCTL 0x00024 /* SerDes Control - RW */
-#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
-#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
-#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
-#define E1000_FCT 0x00030 /* Flow Control Type - RW */
-#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
-#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
-#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
-#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
-#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
-#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
-#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
-#define E1000_RCTL 0x00100 /* RX Control - RW */
-#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
-#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
-#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
-#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
-#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
-#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
-#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
-#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
-#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
-#define E1000_TCTL 0x00400 /* TX Control - RW */
-#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
-#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
-#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
-#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
-#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
-#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
-#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
-#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_FLA 0x0001C /* Flash Access - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
+#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
+#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
+#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
+#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
+#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
#define FEXTNVM_SW_CONFIG 0x0001
-#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
-#define E1000_PBS 0x01008 /* Packet Buffer Size */
-#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
#define E1000_FLASH_UPDATES 1000
-#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
-#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
-#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
-#define E1000_FLSWCTL 0x01030 /* FLASH control register */
-#define E1000_FLSWDATA 0x01034 /* FLASH data register */
-#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
-#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
-#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
-#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
-#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
-#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
-#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
-#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
-#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
-#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
-#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
-#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
-#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
-#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
-#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
-#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
-#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
-#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
-#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
-#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
-#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
-#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
-#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
-#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
-#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
-#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
-#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
-#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
-#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
-#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
-#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
-#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
-#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
-#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
-#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
-#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
-#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
-#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
-#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
-#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
-#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
-#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
-#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
-#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
-#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
-#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
-#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
-#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
-#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
-#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
-#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
-#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
-#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
-#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
-#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
-#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
-#define E1000_COLC 0x04028 /* Collision Count - R/clr */
-#define E1000_DC 0x04030 /* Defer Count - R/clr */
-#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
-#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
-#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
-#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
-#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
-#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
-#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
-#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
-#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
-#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
-#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
-#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
-#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
-#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
-#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
-#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
-#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
-#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
-#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
-#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
-#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
-#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
-#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
-#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
-#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
-#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
-#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
-#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
-#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
-#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
-#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
-#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
-#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
-#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
-#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
-#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
-#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
-#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
-#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
-#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
-#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
-#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
-#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
-#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
-#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
-#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
-#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
-#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
-#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
-#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
-#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
-#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
-#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
-#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
-#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
-#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
-#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
-#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
-#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
-#define E1000_RA 0x05400 /* Receive Address - RW Array */
-#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
-#define E1000_WUC 0x05800 /* Wakeup Control - RW */
-#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
-#define E1000_WUS 0x05810 /* Wakeup Status - RO */
-#define E1000_MANC 0x05820 /* Management Control - RW */
-#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
-#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
-#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
-#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
-#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
-#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
-#define E1000_HOST_IF 0x08800 /* Host Interface */
-#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
-#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
-
-#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
-#define E1000_MDPHYA 0x0003C /* PHY address - RW */
-#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
-#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
-
-#define E1000_GCR 0x05B00 /* PCI-Ex Control */
-#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
-#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
-#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
-#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
-#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
-#define E1000_SWSM 0x05B50 /* SW Semaphore */
-#define E1000_FWSM 0x05B54 /* FW Semaphore */
-#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
-#define E1000_HICR 0x08F00 /* Host Inteface Control */
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
+#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
+#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
+#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
+#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
+#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
+#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
+#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
+#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
+#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
+#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
+#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
+#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
+#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
+#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
+#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
+#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
+#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
+#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
+#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
+#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
+#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
+#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
+#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
+#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
+#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
+#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control */
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Managment Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Interface Control */
/* RSS registers */
-#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
-#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
-#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
-#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
-#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
-#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
+#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
/* Register Set (82542)
*
* Some of the 82542 registers are located at different offsets than they are
#define E1000_82542_RDLEN0 E1000_82542_RDLEN
#define E1000_82542_RDH0 E1000_82542_RDH
#define E1000_82542_RDT0 E1000_82542_RDT
-#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
- * RX Control - RW */
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+ * RX Control - RW */
#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
-#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
-#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
-#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
-#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
-#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
-#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
-#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
-#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
-#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
-#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
+#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
#define E1000_82542_RDTR1 0x00130
#define E1000_82542_RDBAL1 0x00138
#define E1000_82542_RDBAH1 0x0013C
#define E1000_82542_RSSIR E1000_RSSIR
#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
-#define E1000_82542_MANC2H E1000_MANC2H
/* Statistics counters collected by the MAC */
struct e1000_hw_stats {
- u64 crcerrs;
- u64 algnerrc;
- u64 symerrs;
- u64 rxerrc;
- u64 txerrc;
- u64 mpc;
- u64 scc;
- u64 ecol;
- u64 mcc;
- u64 latecol;
- u64 colc;
- u64 dc;
- u64 tncrs;
- u64 sec;
- u64 cexterr;
- u64 rlec;
- u64 xonrxc;
- u64 xontxc;
- u64 xoffrxc;
- u64 xofftxc;
- u64 fcruc;
- u64 prc64;
- u64 prc127;
- u64 prc255;
- u64 prc511;
- u64 prc1023;
- u64 prc1522;
- u64 gprc;
- u64 bprc;
- u64 mprc;
- u64 gptc;
- u64 gorcl;
- u64 gorch;
- u64 gotcl;
- u64 gotch;
- u64 rnbc;
- u64 ruc;
- u64 rfc;
- u64 roc;
- u64 rlerrc;
- u64 rjc;
- u64 mgprc;
- u64 mgpdc;
- u64 mgptc;
- u64 torl;
- u64 torh;
- u64 totl;
- u64 toth;
- u64 tpr;
- u64 tpt;
- u64 ptc64;
- u64 ptc127;
- u64 ptc255;
- u64 ptc511;
- u64 ptc1023;
- u64 ptc1522;
- u64 mptc;
- u64 bptc;
- u64 tsctc;
- u64 tsctfc;
- u64 iac;
- u64 icrxptc;
- u64 icrxatc;
- u64 ictxptc;
- u64 ictxatc;
- u64 ictxqec;
- u64 ictxqmtc;
- u64 icrxdmtc;
- u64 icrxoc;
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 txerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorcl;
+ u64 gorch;
+ u64 gotcl;
+ u64 gotch;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rlerrc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 torl;
+ u64 torh;
+ u64 totl;
+ u64 toth;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
};
/* Structure containing variables used by the shared code (e1000_hw.c) */
struct e1000_hw {
- u8 __iomem *hw_addr;
- u8 __iomem *flash_address;
- e1000_mac_type mac_type;
- e1000_phy_type phy_type;
- u32 phy_init_script;
- e1000_media_type media_type;
- void *back;
- struct e1000_shadow_ram *eeprom_shadow_ram;
- u32 flash_bank_size;
- u32 flash_base_addr;
- e1000_fc_type fc;
- e1000_bus_speed bus_speed;
- e1000_bus_width bus_width;
- e1000_bus_type bus_type;
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ e1000_mac_type mac_type;
+ e1000_phy_type phy_type;
+ u32 phy_init_script;
+ e1000_media_type media_type;
+ void *back;
+ struct e1000_shadow_ram *eeprom_shadow_ram;
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+ e1000_fc_type fc;
+ e1000_bus_speed bus_speed;
+ e1000_bus_width bus_width;
+ e1000_bus_type bus_type;
struct e1000_eeprom_info eeprom;
- e1000_ms_type master_slave;
- e1000_ms_type original_master_slave;
- e1000_ffe_config ffe_config_state;
- u32 asf_firmware_present;
- u32 eeprom_semaphore_present;
- u32 swfw_sync_present;
- u32 swfwhw_semaphore_present;
- unsigned long io_base;
- u32 phy_id;
- u32 phy_revision;
- u32 phy_addr;
- u32 original_fc;
- u32 txcw;
- u32 autoneg_failed;
- u32 max_frame_size;
- u32 min_frame_size;
- u32 mc_filter_type;
- u32 num_mc_addrs;
- u32 collision_delta;
- u32 tx_packet_delta;
- u32 ledctl_default;
- u32 ledctl_mode1;
- u32 ledctl_mode2;
- bool tx_pkt_filtering;
+ e1000_ms_type master_slave;
+ e1000_ms_type original_master_slave;
+ e1000_ffe_config ffe_config_state;
+ u32 asf_firmware_present;
+ u32 eeprom_semaphore_present;
+ unsigned long io_base;
+ u32 phy_id;
+ u32 phy_revision;
+ u32 phy_addr;
+ u32 original_fc;
+ u32 txcw;
+ u32 autoneg_failed;
+ u32 max_frame_size;
+ u32 min_frame_size;
+ u32 mc_filter_type;
+ u32 num_mc_addrs;
+ u32 collision_delta;
+ u32 tx_packet_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ bool tx_pkt_filtering;
struct e1000_host_mng_dhcp_cookie mng_cookie;
- u16 phy_spd_default;
- u16 autoneg_advertised;
- u16 pci_cmd_word;
- u16 fc_high_water;
- u16 fc_low_water;
- u16 fc_pause_time;
- u16 current_ifs_val;
- u16 ifs_min_val;
- u16 ifs_max_val;
- u16 ifs_step_size;
- u16 ifs_ratio;
- u16 device_id;
- u16 vendor_id;
- u16 subsystem_id;
- u16 subsystem_vendor_id;
- u8 revision_id;
- u8 autoneg;
- u8 mdix;
- u8 forced_speed_duplex;
- u8 wait_autoneg_complete;
- u8 dma_fairness;
- u8 mac_addr[NODE_ADDRESS_SIZE];
- u8 perm_mac_addr[NODE_ADDRESS_SIZE];
- bool disable_polarity_correction;
- bool speed_downgraded;
- e1000_smart_speed smart_speed;
- e1000_dsp_config dsp_config_state;
- bool get_link_status;
- bool serdes_link_down;
- bool tbi_compatibility_en;
- bool tbi_compatibility_on;
- bool laa_is_present;
- bool phy_reset_disable;
- bool initialize_hw_bits_disable;
- bool fc_send_xon;
- bool fc_strict_ieee;
- bool report_tx_early;
- bool adaptive_ifs;
- bool ifs_params_forced;
- bool in_ifs_mode;
- bool mng_reg_access_disabled;
- bool leave_av_bit_off;
- bool kmrn_lock_loss_workaround_disabled;
- bool bad_tx_carr_stats_fd;
- bool has_manc2h;
- bool rx_needs_kicking;
- bool has_smbus;
+ u16 phy_spd_default;
+ u16 autoneg_advertised;
+ u16 pci_cmd_word;
+ u16 fc_high_water;
+ u16 fc_low_water;
+ u16 fc_pause_time;
+ u16 current_ifs_val;
+ u16 ifs_min_val;
+ u16 ifs_max_val;
+ u16 ifs_step_size;
+ u16 ifs_ratio;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u8 autoneg;
+ u8 mdix;
+ u8 forced_speed_duplex;
+ u8 wait_autoneg_complete;
+ u8 dma_fairness;
+ u8 mac_addr[NODE_ADDRESS_SIZE];
+ u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+ bool disable_polarity_correction;
+ bool speed_downgraded;
+ e1000_smart_speed smart_speed;
+ e1000_dsp_config dsp_config_state;
+ bool get_link_status;
+ bool serdes_has_link;
+ bool tbi_compatibility_en;
+ bool tbi_compatibility_on;
+ bool laa_is_present;
+ bool phy_reset_disable;
+ bool initialize_hw_bits_disable;
+ bool fc_send_xon;
+ bool fc_strict_ieee;
+ bool report_tx_early;
+ bool adaptive_ifs;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool mng_reg_access_disabled;
+ bool leave_av_bit_off;
+ bool bad_tx_carr_stats_fd;
+ bool has_smbus;
};
-
-#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
-#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
-#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
-#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
-#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
-#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
-#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
-#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
+#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
+#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
+#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
+#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
/* Register Bit Masks */
/* Device Control */
-#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
-#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
-#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
-#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
-#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
-#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
-#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
-#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
-#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
-#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
-#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
-#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
-#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
-#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
-#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
-#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
-#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
-#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
-#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
-#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
-#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
-#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
-#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
-#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
-#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
-#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
-#define E1000_CTRL_RST 0x04000000 /* Global reset */
-#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
-#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
-#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
-#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
-#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
-#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
/* Device Status */
-#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
#define E1000_STATUS_FUNC_SHIFT 2
-#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
-#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
-#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
-#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
#define E1000_STATUS_SPEED_MASK 0x000000C0
-#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
- by EEPROM/Flash */
-#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
-#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
-#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
-#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
-#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
-#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
-#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
-#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
-#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
-#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
-#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
-#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
-#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
+ by EEPROM/Flash */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
#define E1000_STATUS_FUSE_8 0x04000000
#define E1000_STATUS_FUSE_9 0x08000000
-#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
-#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
-/* Constants used to intrepret the masked PCI-X bus speed. */
-#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
-#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
-#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
+/* Constants used to interpret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
/* EEPROM/Flash Control */
-#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
-#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
-#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
-#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
+#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
+#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
#define E1000_EECD_FWE_MASK 0x00000030
-#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
-#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
#define E1000_EECD_FWE_SHIFT 4
-#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
-#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
-#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
-#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
-#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
- * (0-small, 1-large) */
-#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
+#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
+#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
+#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
+ * (0-small, 1-large) */
+#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
#ifndef E1000_EEPROM_GRANT_ATTEMPTS
-#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
#endif
-#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
-#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
+#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
#define E1000_EECD_SIZE_EX_SHIFT 11
-#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
-#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
-#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
-#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
-#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
-#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
-#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
#define E1000_EECD_SECVAL_SHIFT 22
#define E1000_STM_OPCODE 0xDB00
#define E1000_HICR_FW_RESET 0xC0
#define E1000_ICH_NVM_SIG_MASK 0xC0
/* EEPROM Read */
-#define E1000_EERD_START 0x00000001 /* Start Read */
-#define E1000_EERD_DONE 0x00000010 /* Read Done */
+#define E1000_EERD_START 0x00000001 /* Start Read */
+#define E1000_EERD_DONE 0x00000010 /* Read Done */
#define E1000_EERD_ADDR_SHIFT 8
-#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
+#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
#define E1000_EERD_DATA_SHIFT 16
-#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
+#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
/* SPI EEPROM Status Register */
#define EEPROM_STATUS_RDY_SPI 0x01
#define EEPROM_STATUS_WPEN_SPI 0x80
/* Extended Device Control */
-#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
-#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
-#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
-#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
-#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
-#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
-#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
-#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
-#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
-#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
-#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
-#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
-#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
-#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
-#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
-#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
-#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
-#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
-#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
-#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
/* MDI Control */
#define E1000_LEDCTL_MODE_LED_OFF 0xF
/* Receive Address */
-#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
/* Interrupt Cause Read */
-#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
-#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
-#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
-#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
-#define E1000_ICR_RXO 0x00000040 /* rx overrun */
-#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
-#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
-#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
-#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
-#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
-#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
-#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
#define E1000_ICR_TXD_LOW 0x00008000
#define E1000_ICR_SRPD 0x00010000
-#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
-#define E1000_ICR_MNG 0x00040000 /* Manageability event */
-#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
-#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
-#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
-#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
-#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
-#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
-#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
-#define E1000_ICR_EPRST 0x00100000 /* ME handware reset occurs */
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
/* Interrupt Cause Set */
-#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
-#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
-#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
-#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
-#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
-#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
-#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_ICS_SRPD E1000_ICR_SRPD
-#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
-#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
-#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
-#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
-#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
-#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
#define E1000_ICS_DSW E1000_ICR_DSW
#define E1000_ICS_PHYINT E1000_ICR_PHYINT
#define E1000_ICS_EPRST E1000_ICR_EPRST
/* Interrupt Mask Set */
-#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
-#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
-#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
-#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
-#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
-#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
-#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_IMS_SRPD E1000_ICR_SRPD
-#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
-#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
-#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
-#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
-#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
-#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
#define E1000_IMS_DSW E1000_ICR_DSW
#define E1000_IMS_PHYINT E1000_ICR_PHYINT
#define E1000_IMS_EPRST E1000_ICR_EPRST
/* Interrupt Mask Clear */
-#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
-#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
-#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
-#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
-#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
-#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
-#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
#define E1000_IMC_SRPD E1000_ICR_SRPD
-#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
-#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
-#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
-#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
-#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
-#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
#define E1000_IMC_DSW E1000_ICR_DSW
#define E1000_IMC_PHYINT E1000_ICR_PHYINT
#define E1000_IMC_EPRST E1000_ICR_EPRST
/* Receive Control */
-#define E1000_RCTL_RST 0x00000001 /* Software reset */
-#define E1000_RCTL_EN 0x00000002 /* enable */
-#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
-#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
-#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
-#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
-#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
-#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
-#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
-#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
-#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
-#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
-#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
-#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
-#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
-#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
-#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
-#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
-#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
-#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
-#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
-#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
-#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
-#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
-#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
-#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
-#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
-#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
-#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
-#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
-#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
-#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
-#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
-#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
-#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
/* Use byte values for the following shift parameters
* Usage:
#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
-#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
-#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
-#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
-#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
/* SW_W_SYNC definitions */
#define E1000_SWFW_EEP_SM 0x0001
#define E1000_SWFW_MAC_CSR_SM 0x0008
/* Receive Descriptor */
-#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
-#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
-#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
-#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
-#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
+#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
+#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
+#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
+#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
+#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
/* Flow Control */
-#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
-#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
-#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
-#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
/* Header split receive */
#define E1000_RFCTL_ISCSI_DIS 0x00000001
#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
/* Receive Descriptor Control */
-#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
-#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
-#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
-#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
+#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
+#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
+#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
+#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
/* Transmit Descriptor Control */
-#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
-#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
-#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
-#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
-#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
-#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
-#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
- still to be processed. */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
+ still to be processed. */
/* Transmit Configuration Word */
-#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
-#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
-#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
-#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
-#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
-#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
-#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
-#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
-#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
-#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
/* Receive Configuration Word */
-#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
-#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
-#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
-#define E1000_RXCW_CC 0x10000000 /* Receive config change */
-#define E1000_RXCW_C 0x20000000 /* Receive config */
-#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
-#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
/* Transmit Control */
-#define E1000_TCTL_RST 0x00000001 /* software reset */
-#define E1000_TCTL_EN 0x00000002 /* enable tx */
-#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
-#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
-#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
-#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
-#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
-#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
-#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
-#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
-#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
/* Extended Transmit Control */
-#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
-#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
-
-#define DEFAULT_80003ES2LAN_TCTL_EXT_GCEX 0x00010000
+#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
/* Receive Checksum Control */
-#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
-#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
-#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
-#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
-#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
/* Multiple Receive Queue Control */
#define E1000_MRQC_ENABLE_MASK 0x00000003
/* Definitions for power management and wakeup registers */
/* Wake Up Control */
-#define E1000_WUC_APME 0x00000001 /* APM Enable */
-#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
-#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
-#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
-#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
/* Wake Up Filter Control */
-#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
-#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
-#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
-#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
-#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
-#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
-#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
-#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
-#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
-#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
-#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
/* Wake Up Status */
-#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
-#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
-#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
-#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
-#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
-#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
-#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
-#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
-#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
-#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
-#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
-#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
-#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
+#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
+#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
+#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
+#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
+#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
+#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
+#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
+#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
+#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
+#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
+#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
+#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
/* Management Control */
-#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
-#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
-#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
-#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
-#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
-#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
-#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
-#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
- * Filtering */
-#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
-#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
-#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
-#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
-#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
-#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
-#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
- * filtering */
-#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
- * memory */
-#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
- * filtering */
-#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
-#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
-#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
-#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
-#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
-#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
-#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
-#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
-
-#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
-#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
+ * Filtering */
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
+ * filtering */
+#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
+ * memory */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
+ * filtering */
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
/* SW Semaphore Register */
-#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
-#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
-#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
-#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
/* FW Semaphore Register */
-#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
+#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
#define E1000_FWSM_MODE_SHIFT 1
-#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
+#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
-#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
-#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
-#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
+#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
#define E1000_FWSM_SKUEL_SHIFT 29
-#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
-#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
-#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
-#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
/* FFLT Debug Register */
-#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
+#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
typedef enum {
- e1000_mng_mode_none = 0,
- e1000_mng_mode_asf,
- e1000_mng_mode_pt,
- e1000_mng_mode_ipmi,
- e1000_mng_mode_host_interface_only
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_interface_only
} e1000_mng_mode;
-/* Host Inteface Control Register */
-#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
-#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
- * to put command in RAM */
-#define E1000_HICR_SV 0x00000004 /* Status Validity */
-#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
+/* Host Interface Control Register */
+#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
+#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
+ * to put command in RAM */
+#define E1000_HICR_SV 0x00000004 /* Status Validity */
+#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
-#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
-#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
-#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
-#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
+#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
struct e1000_host_command_header {
- u8 command_id;
- u8 command_length;
- u8 command_options; /* I/F bits for command, status for return */
- u8 checksum;
+ u8 command_id;
+ u8 command_length;
+ u8 command_options; /* I/F bits for command, status for return */
+ u8 checksum;
};
struct e1000_host_command_info {
- struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
- u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
+ struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
};
/* Host SMB register #0 */
-#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
-#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
-#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
-#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
+#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
+#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
+#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
+#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
/* Host SMB register #1 */
#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
/* FW Status Register */
-#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
+#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
/* Wake Up Packet Length */
-#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
#define E1000_MDALIGN 4096
#define PCI_EX_LINK_WIDTH_SHIFT 4
/* EEPROM Commands - Microwire */
-#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
-#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
-#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
-#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erast/write disable */
+#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */
/* EEPROM Commands - SPI */
-#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
-#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
-#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
-#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
-#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
-#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
-#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
-#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
-#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
-#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
+#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
+#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
+#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
+#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
+#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
/* EEPROM Size definitions */
#define EEPROM_WORD_SIZE_SHIFT 6
#define EEPROM_COMPAT 0x0003
#define EEPROM_ID_LED_SETTINGS 0x0004
#define EEPROM_VERSION 0x0005
-#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
+#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
#define EEPROM_PHY_CLASS_WORD 0x0007
#define EEPROM_INIT_CONTROL1_REG 0x000A
#define EEPROM_INIT_CONTROL2_REG 0x000F
#define EEPROM_FLASH_VERSION 0x0032
#define EEPROM_CHECKSUM_REG 0x003F
-#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
-#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
+#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
+#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
/* Word definitions for ID LED Settings */
#define ID_LED_RESERVED_0000 0x0000
#define ID_LED_RESERVED_FFFF 0xFFFF
-#define ID_LED_RESERVED_82573 0xF746
-#define ID_LED_DEFAULT_82573 0x1811
#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
(ID_LED_OFF1_OFF2 << 8) | \
(ID_LED_DEF1_DEF2 << 4) | \
(ID_LED_DEF1_DEF2))
-#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
- (ID_LED_DEF1_OFF2 << 8) | \
- (ID_LED_DEF1_ON2 << 4) | \
- (ID_LED_DEF1_DEF2))
#define ID_LED_DEF1_DEF2 0x1
#define ID_LED_DEF1_ON2 0x2
#define ID_LED_DEF1_OFF2 0x3
#define IGP_ACTIVITY_LED_ENABLE 0x0300
#define IGP_LED3_MODE 0x07000000
-
/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
#define DEFAULT_82542_TIPG_IPGR2 10
#define DEFAULT_82543_TIPG_IPGR2 6
-#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
#define E1000_TIPG_IPGR2_SHIFT 20
-#define DEFAULT_80003ES2LAN_TIPG_IPGT_10_100 0x00000009
-#define DEFAULT_80003ES2LAN_TIPG_IPGT_1000 0x00000008
#define E1000_TXDMAC_DPP 0x00000001
/* Adaptive IFS defines */
#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
/* PBA constants */
-#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
-#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
-#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
+#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
+#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
#define E1000_PBA_20K 0x0014
#define E1000_PBA_22K 0x0016
#define E1000_PBA_24K 0x0018
#define E1000_PBA_34K 0x0022
#define E1000_PBA_38K 0x0026
#define E1000_PBA_40K 0x0028
-#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
+#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
#define E1000_PBS_16K E1000_PBA_16K
#define FLOW_CONTROL_TYPE 0x8808
/* The historical defaults for the flow control values are given below. */
-#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
-#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
-#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
/* PCIX Config space */
#define PCIX_COMMAND_REGISTER 0xE6
#define PCIX_STATUS_HI_MMRBC_4K 0x3
#define PCIX_STATUS_HI_MMRBC_2K 0x2
-
/* Number of bits required to shift right the "pause" bits from the
* EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
*/
*/
#define ILOS_SHIFT 3
-
#define RECEIVE_BUFFER_ALIGN_SIZE (256)
/* Number of milliseconds we wait for auto-negotiation to complete */
#define LINK_UP_TIMEOUT 500
-/* Number of 100 microseconds we wait for PCI Express master disable */
-#define MASTER_DISABLE_TIMEOUT 800
/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
#define AUTO_READ_DONE_TIMEOUT 10
/* Number of milliseconds we wait for PHY configuration done after MAC reset */
(((length) > (adapter)->min_frame_size) && \
((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
-
/* Structures, enums, and macros for the PHY */
/* Bit definitions for the Management Data IO (MDIO) and Management Data
/* PHY 1000 MII Register/Bit Definitions */
/* PHY Registers defined by IEEE */
-#define PHY_CTRL 0x00 /* Control Register */
-#define PHY_STATUS 0x01 /* Status Regiser */
-#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
-#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
-#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
-#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
-
-#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
-#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
/* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
-#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
-#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
-#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
-#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
-#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
-
-#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
-#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
-#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
-#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
-#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
#define IGP01E1000_IEEE_REGS_PAGE 0x0000
#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
/* IGP01E1000 Specific Registers */
-#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
-#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
-#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
-#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
-#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
-#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
#define IGP02E1000_PHY_POWER_MGMT 0x19
-#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
/* IGP01E1000 AGC Registers - stores the cable length values*/
#define IGP01E1000_PHY_AGC_A 0x1172
#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
-/* Bits...
- * 15-5: page
- * 4-0: register offset
- */
-#define GG82563_PAGE_SHIFT 5
-#define GG82563_REG(page, reg) \
- (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
-#define GG82563_MIN_ALT_REG 30
-
-/* GG82563 Specific Registers */
-#define GG82563_PHY_SPEC_CTRL \
- GG82563_REG(0, 16) /* PHY Specific Control */
-#define GG82563_PHY_SPEC_STATUS \
- GG82563_REG(0, 17) /* PHY Specific Status */
-#define GG82563_PHY_INT_ENABLE \
- GG82563_REG(0, 18) /* Interrupt Enable */
-#define GG82563_PHY_SPEC_STATUS_2 \
- GG82563_REG(0, 19) /* PHY Specific Status 2 */
-#define GG82563_PHY_RX_ERR_CNTR \
- GG82563_REG(0, 21) /* Receive Error Counter */
-#define GG82563_PHY_PAGE_SELECT \
- GG82563_REG(0, 22) /* Page Select */
-#define GG82563_PHY_SPEC_CTRL_2 \
- GG82563_REG(0, 26) /* PHY Specific Control 2 */
-#define GG82563_PHY_PAGE_SELECT_ALT \
- GG82563_REG(0, 29) /* Alternate Page Select */
-#define GG82563_PHY_TEST_CLK_CTRL \
- GG82563_REG(0, 30) /* Test Clock Control (use reg. 29 to select) */
-
-#define GG82563_PHY_MAC_SPEC_CTRL \
- GG82563_REG(2, 21) /* MAC Specific Control Register */
-#define GG82563_PHY_MAC_SPEC_CTRL_2 \
- GG82563_REG(2, 26) /* MAC Specific Control 2 */
-
-#define GG82563_PHY_DSP_DISTANCE \
- GG82563_REG(5, 26) /* DSP Distance */
-
-/* Page 193 - Port Control Registers */
-#define GG82563_PHY_KMRN_MODE_CTRL \
- GG82563_REG(193, 16) /* Kumeran Mode Control */
-#define GG82563_PHY_PORT_RESET \
- GG82563_REG(193, 17) /* Port Reset */
-#define GG82563_PHY_REVISION_ID \
- GG82563_REG(193, 18) /* Revision ID */
-#define GG82563_PHY_DEVICE_ID \
- GG82563_REG(193, 19) /* Device ID */
-#define GG82563_PHY_PWR_MGMT_CTRL \
- GG82563_REG(193, 20) /* Power Management Control */
-#define GG82563_PHY_RATE_ADAPT_CTRL \
- GG82563_REG(193, 25) /* Rate Adaptation Control */
-
-/* Page 194 - KMRN Registers */
-#define GG82563_PHY_KMRN_FIFO_CTRL_STAT \
- GG82563_REG(194, 16) /* FIFO's Control/Status */
-#define GG82563_PHY_KMRN_CTRL \
- GG82563_REG(194, 17) /* Control */
-#define GG82563_PHY_INBAND_CTRL \
- GG82563_REG(194, 18) /* Inband Control */
-#define GG82563_PHY_KMRN_DIAGNOSTIC \
- GG82563_REG(194, 19) /* Diagnostic */
-#define GG82563_PHY_ACK_TIMEOUTS \
- GG82563_REG(194, 20) /* Acknowledge Timeouts */
-#define GG82563_PHY_ADV_ABILITY \
- GG82563_REG(194, 21) /* Advertised Ability */
-#define GG82563_PHY_LINK_PARTNER_ADV_ABILITY \
- GG82563_REG(194, 23) /* Link Partner Advertised Ability */
-#define GG82563_PHY_ADV_NEXT_PAGE \
- GG82563_REG(194, 24) /* Advertised Next Page */
-#define GG82563_PHY_LINK_PARTNER_ADV_NEXT_PAGE \
- GG82563_REG(194, 25) /* Link Partner Advertised Next page */
-#define GG82563_PHY_KMRN_MISC \
- GG82563_REG(194, 26) /* Misc. */
-
/* PHY Control Register */
-#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
-#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN 0x0800 /* Power down */
-#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
/* PHY Status Register */
-#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
-#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
/* Autoneg Advertisement Register */
-#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
-#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
-#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
-#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
-#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
-#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
-#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
/* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
-#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
-#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
-#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
-#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
-#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
-#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
-#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
-#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
-#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
/* Autoneg Expansion Register */
-#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
-#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
-#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
-#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
-#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
/* Next Page TX Register */
-#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
- * of different NP
- */
-#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
- * 0 = cannot comply with msg
- */
-#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
-#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
- * 0 = sending last NP
- */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
/* Link Partner Next Page Register */
-#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
- * of different NP
- */
-#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
- * 0 = cannot comply with msg
- */
-#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
-#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
-#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
- * 0 = sending last NP
- */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
/* 1000BASE-T Control Register */
-#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
-#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
-#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
- /* 0=DTE device */
-#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
- /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
- /* 0=Automatic Master/Slave config */
-#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
-#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
-#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
-#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
/* 1000BASE-T Status Register */
-#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
-#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
-#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
-#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
-#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
-#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
/* Extended Status Register */
-#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
-#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
-#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
-#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
-#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
-#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
+#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
-#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
- /* (0=enable, 1=disable) */
+#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
+ /* (0=enable, 1=disable) */
/* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
-#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
-#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
- * 0=CLK125 toggling
- */
-#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
- /* Manual MDI configuration */
-#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
-#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
- * 100BASE-TX/10BASE-T:
- * MDI Mode
- */
-#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
- * all speeds.
- */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+ * 0=CLK125 toggling
+ */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+ * 100BASE-TX/10BASE-T:
+ * MDI Mode
+ */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
- /* 1=Enable Extended 10BASE-T distance
- * (Lower 10BASE-T RX Threshold)
- * 0=Normal 10BASE-T RX Threshold */
+ /* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
- /* 1=5-Bit interface in 100BASE-TX
- * 0=MII interface in 100BASE-TX */
-#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
-#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+ /* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
/* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
-#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
-#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
-#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
- * 3=110-140M;4=>140M */
-#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
-#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
-#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
-#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
-#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
-#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
-#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
+ * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
/* M88E1000 Extended PHY Specific Control Register */
-#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
-#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
- * Will assert lost lock and bring
- * link down if idle not seen
- * within 1ms in 1000BASE-T
- */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
/* Number of times we will attempt to autonegotiate before downshifting if we
* are the master */
#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
-#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
-#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
-#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
/* M88EC018 Rev 2 specific DownShift settings */
#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
/* IGP01E1000 Specific Port Status Register - R/O */
-#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
+#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
#define IGP01E1000_PSSR_LINK_UP 0x0400
#define IGP01E1000_PSSR_MDIX 0x0800
-#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
-#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
-#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
+#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
+#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
/* IGP01E1000 Specific Port Control Register - R/W */
#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
#define IGP01E1000_PSCR_FLIP_CHIP 0x0800
#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
-#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
/* IGP01E1000 Specific Port Link Health Register */
#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
-#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
-#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
-#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
+#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
+#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
#define IGP01E1000_PLHR_DATA_ERR_0 0x0100
#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
#define IGP01E1000_MSE_CHANNEL_B 0x0F00
#define IGP01E1000_MSE_CHANNEL_A 0xF000
-#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
-#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
-#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
/* IGP01E1000 DSP reset macros */
#define DSP_RESET_ENABLE 0x0
/* IGP01E1000 & IGP02E1000 AGC Registers */
-#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
-#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
+#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
/* IGP02E1000 AGC Register Length 9-bit mask */
#define IGP02E1000_AGC_LENGTH_MASK 0x7F
#define IGP01E1000_PHY_POLARITY_MASK 0x0078
/* IGP01E1000 GMII FIFO Register */
-#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
- * on Link-Up */
-#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
+#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
+ * on Link-Up */
+#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
/* IGP01E1000 Analog Register */
#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
-/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
-#define GG82563_PSCR_DISABLE_JABBER 0x0001 /* 1=Disable Jabber */
-#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Polarity Reversal Disabled */
-#define GG82563_PSCR_POWER_DOWN 0x0004 /* 1=Power Down */
-#define GG82563_PSCR_COPPER_TRANSMITER_DISABLE 0x0008 /* 1=Transmitter Disabled */
-#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
-#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI configuration */
-#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX configuration */
-#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Automatic crossover */
-#define GG82563_PSCR_ENALBE_EXTENDED_DISTANCE 0x0080 /* 1=Enable Extended Distance */
-#define GG82563_PSCR_ENERGY_DETECT_MASK 0x0300
-#define GG82563_PSCR_ENERGY_DETECT_OFF 0x0000 /* 00,01=Off */
-#define GG82563_PSCR_ENERGY_DETECT_RX 0x0200 /* 10=Sense on Rx only (Energy Detect) */
-#define GG82563_PSCR_ENERGY_DETECT_RX_TM 0x0300 /* 11=Sense and Tx NLP */
-#define GG82563_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force Link Good */
-#define GG82563_PSCR_DOWNSHIFT_ENABLE 0x0800 /* 1=Enable Downshift */
-#define GG82563_PSCR_DOWNSHIFT_COUNTER_MASK 0x7000
-#define GG82563_PSCR_DOWNSHIFT_COUNTER_SHIFT 12
-
-/* PHY Specific Status Register (Page 0, Register 17) */
-#define GG82563_PSSR_JABBER 0x0001 /* 1=Jabber */
-#define GG82563_PSSR_POLARITY 0x0002 /* 1=Polarity Reversed */
-#define GG82563_PSSR_LINK 0x0008 /* 1=Link is Up */
-#define GG82563_PSSR_ENERGY_DETECT 0x0010 /* 1=Sleep, 0=Active */
-#define GG82563_PSSR_DOWNSHIFT 0x0020 /* 1=Downshift */
-#define GG82563_PSSR_CROSSOVER_STATUS 0x0040 /* 1=MDIX, 0=MDI */
-#define GG82563_PSSR_RX_PAUSE_ENABLED 0x0100 /* 1=Receive Pause Enabled */
-#define GG82563_PSSR_TX_PAUSE_ENABLED 0x0200 /* 1=Transmit Pause Enabled */
-#define GG82563_PSSR_LINK_UP 0x0400 /* 1=Link Up */
-#define GG82563_PSSR_SPEED_DUPLEX_RESOLVED 0x0800 /* 1=Resolved */
-#define GG82563_PSSR_PAGE_RECEIVED 0x1000 /* 1=Page Received */
-#define GG82563_PSSR_DUPLEX 0x2000 /* 1-Full-Duplex */
-#define GG82563_PSSR_SPEED_MASK 0xC000
-#define GG82563_PSSR_SPEED_10MBPS 0x0000 /* 00=10Mbps */
-#define GG82563_PSSR_SPEED_100MBPS 0x4000 /* 01=100Mbps */
-#define GG82563_PSSR_SPEED_1000MBPS 0x8000 /* 10=1000Mbps */
-
-/* PHY Specific Status Register 2 (Page 0, Register 19) */
-#define GG82563_PSSR2_JABBER 0x0001 /* 1=Jabber */
-#define GG82563_PSSR2_POLARITY_CHANGED 0x0002 /* 1=Polarity Changed */
-#define GG82563_PSSR2_ENERGY_DETECT_CHANGED 0x0010 /* 1=Energy Detect Changed */
-#define GG82563_PSSR2_DOWNSHIFT_INTERRUPT 0x0020 /* 1=Downshift Detected */
-#define GG82563_PSSR2_MDI_CROSSOVER_CHANGE 0x0040 /* 1=Crossover Changed */
-#define GG82563_PSSR2_FALSE_CARRIER 0x0100 /* 1=False Carrier */
-#define GG82563_PSSR2_SYMBOL_ERROR 0x0200 /* 1=Symbol Error */
-#define GG82563_PSSR2_LINK_STATUS_CHANGED 0x0400 /* 1=Link Status Changed */
-#define GG82563_PSSR2_AUTO_NEG_COMPLETED 0x0800 /* 1=Auto-Neg Completed */
-#define GG82563_PSSR2_PAGE_RECEIVED 0x1000 /* 1=Page Received */
-#define GG82563_PSSR2_DUPLEX_CHANGED 0x2000 /* 1=Duplex Changed */
-#define GG82563_PSSR2_SPEED_CHANGED 0x4000 /* 1=Speed Changed */
-#define GG82563_PSSR2_AUTO_NEG_ERROR 0x8000 /* 1=Auto-Neg Error */
-
-/* PHY Specific Control Register 2 (Page 0, Register 26) */
-#define GG82563_PSCR2_10BT_POLARITY_FORCE 0x0002 /* 1=Force Negative Polarity */
-#define GG82563_PSCR2_1000MB_TEST_SELECT_MASK 0x000C
-#define GG82563_PSCR2_1000MB_TEST_SELECT_NORMAL 0x0000 /* 00,01=Normal Operation */
-#define GG82563_PSCR2_1000MB_TEST_SELECT_112NS 0x0008 /* 10=Select 112ns Sequence */
-#define GG82563_PSCR2_1000MB_TEST_SELECT_16NS 0x000C /* 11=Select 16ns Sequence */
-#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Negotiation */
-#define GG82563_PSCR2_1000BT_DISABLE 0x4000 /* 1=Disable 1000BASE-T */
-#define GG82563_PSCR2_TRANSMITER_TYPE_MASK 0x8000
-#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_B 0x0000 /* 0=Class B */
-#define GG82563_PSCR2_TRANSMITTER_TYPE_CLASS_A 0x8000 /* 1=Class A */
-
-/* MAC Specific Control Register (Page 2, Register 21) */
-/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
-#define GG82563_MSCR_TX_CLK_MASK 0x0007
-#define GG82563_MSCR_TX_CLK_10MBPS_2_5MHZ 0x0004
-#define GG82563_MSCR_TX_CLK_100MBPS_25MHZ 0x0005
-#define GG82563_MSCR_TX_CLK_1000MBPS_2_5MHZ 0x0006
-#define GG82563_MSCR_TX_CLK_1000MBPS_25MHZ 0x0007
-
-#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
-
-/* DSP Distance Register (Page 5, Register 26) */
-#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M;
- 1 = 50-80M;
- 2 = 80-110M;
- 3 = 110-140M;
- 4 = >140M */
-
-/* Kumeran Mode Control Register (Page 193, Register 16) */
-#define GG82563_KMCR_PHY_LEDS_EN 0x0020 /* 1=PHY LEDs, 0=Kumeran Inband LEDs */
-#define GG82563_KMCR_FORCE_LINK_UP 0x0040 /* 1=Force Link Up */
-#define GG82563_KMCR_SUPPRESS_SGMII_EPD_EXT 0x0080
-#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT_MASK 0x0400
-#define GG82563_KMCR_MDIO_BUS_SPEED_SELECT 0x0400 /* 1=6.25MHz, 0=0.8MHz */
-#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
-
-/* Power Management Control Register (Page 193, Register 20) */
-#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001 /* 1=Enalbe SERDES Electrical Idle */
-#define GG82563_PMCR_DISABLE_PORT 0x0002 /* 1=Disable Port */
-#define GG82563_PMCR_DISABLE_SERDES 0x0004 /* 1=Disable SERDES */
-#define GG82563_PMCR_REVERSE_AUTO_NEG 0x0008 /* 1=Enable Reverse Auto-Negotiation */
-#define GG82563_PMCR_DISABLE_1000_NON_D0 0x0010 /* 1=Disable 1000Mbps Auto-Neg in non D0 */
-#define GG82563_PMCR_DISABLE_1000 0x0020 /* 1=Disable 1000Mbps Auto-Neg Always */
-#define GG82563_PMCR_REVERSE_AUTO_NEG_D0A 0x0040 /* 1=Enable D0a Reverse Auto-Negotiation */
-#define GG82563_PMCR_FORCE_POWER_STATE 0x0080 /* 1=Force Power State */
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_MASK 0x0300
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_DR 0x0000 /* 00=Dr */
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0U 0x0100 /* 01=D0u */
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D0A 0x0200 /* 10=D0a */
-#define GG82563_PMCR_PROGRAMMED_POWER_STATE_D3 0x0300 /* 11=D3 */
-
-/* In-Band Control Register (Page 194, Register 18) */
-#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding Use */
-
-
/* Bit definitions for valid PHY IDs. */
/* I = Integrated
* E = External
#define M88E1011_I_REV_4 0x04
#define M88E1111_I_PHY_ID 0x01410CC0
#define L1LXT971A_PHY_ID 0x001378E0
-#define GG82563_E_PHY_ID 0x01410CA0
-
/* Bits...
* 15-5: page
(((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
#define IGP3_PHY_PORT_CTRL \
- PHY_REG(769, 17) /* Port General Configuration */
+ PHY_REG(769, 17) /* Port General Configuration */
#define IGP3_PHY_RATE_ADAPT_CTRL \
- PHY_REG(769, 25) /* Rate Adapter Control Register */
+ PHY_REG(769, 25) /* Rate Adapter Control Register */
#define IGP3_KMRN_FIFO_CTRL_STATS \
- PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+ PHY_REG(770, 16) /* KMRN FIFO's control/status register */
#define IGP3_KMRN_POWER_MNG_CTRL \
- PHY_REG(770, 17) /* KMRN Power Management Control Register */
+ PHY_REG(770, 17) /* KMRN Power Management Control Register */
#define IGP3_KMRN_INBAND_CTRL \
- PHY_REG(770, 18) /* KMRN Inband Control Register */
+ PHY_REG(770, 18) /* KMRN Inband Control Register */
#define IGP3_KMRN_DIAG \
- PHY_REG(770, 19) /* KMRN Diagnostic register */
-#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+ PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
#define IGP3_KMRN_ACK_TIMEOUT \
- PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+ PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
#define IGP3_VR_CTRL \
- PHY_REG(776, 18) /* Voltage regulator control register */
-#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
-#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
+ PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
#define IGP3_CAPABILITY \
- PHY_REG(776, 19) /* IGP3 Capability Register */
+ PHY_REG(776, 19) /* IGP3 Capability Register */
/* Capabilities for SKU Control */
-#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
-#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
-#define IGP3_CAP_ASF 0x0004 /* Support ASF */
-#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
-#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
-#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
-#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
-#define IGP3_CAP_RSS 0x0080 /* Support RSS */
-#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
-#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
+#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
#define IGP3_PPC_JORDAN_EN 0x0001
#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
-#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
-#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
+#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
#define IGP3_KMRN_EC_DIS_INBAND 0x0080
#define IGP03E1000_E_PHY_ID 0x02A80390
-#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
+#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
#define IFE_PLUS_E_PHY_ID 0x02A80320
#define IFE_C_E_PHY_ID 0x02A80310
-#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
-#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
-#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
-#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnet Counter */
-#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
-#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
-#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
-#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
-#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
-#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
-#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
-#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
-#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
-
-#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Defaut 1 = Disable auto reduced power down */
-#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
-#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
-#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
-#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
-#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
-#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */
+#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
#define IFE_PESC_POLARITY_REVERSED_SHIFT 8
-#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dyanmic Power Down disabled */
-#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
-#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
-#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
#define IFE_PSC_FORCE_POLARITY_SHIFT 5
#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
-#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
-#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
-#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
-#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
#define IFE_PMC_MDIX_MODE_SHIFT 6
-#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
-
-#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
-#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
-#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
-#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
-#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
-#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
-#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
-#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
-#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
-#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
-#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
-
-#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
-#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
-#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
+#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
+#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
#define ICH_FLASH_SEG_SIZE_256 256
#define ICH_FLASH_SEG_SIZE_4K 4096
#define ICH_FLASH_SEG_SIZE_64K 65536
#define ICH_GFPREG_BASE_MASK 0x1FFF
#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
-/* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
-/* Offset 04h HSFSTS */
-union ich8_hws_flash_status {
- struct ich8_hsfsts {
-#ifdef __BIG_ENDIAN
- u16 reserved2 :6;
- u16 fldesvalid :1;
- u16 flockdn :1;
- u16 flcdone :1;
- u16 flcerr :1;
- u16 dael :1;
- u16 berasesz :2;
- u16 flcinprog :1;
- u16 reserved1 :2;
-#else
- u16 flcdone :1; /* bit 0 Flash Cycle Done */
- u16 flcerr :1; /* bit 1 Flash Cycle Error */
- u16 dael :1; /* bit 2 Direct Access error Log */
- u16 berasesz :2; /* bit 4:3 Block/Sector Erase Size */
- u16 flcinprog :1; /* bit 5 flash SPI cycle in Progress */
- u16 reserved1 :2; /* bit 13:6 Reserved */
- u16 reserved2 :6; /* bit 13:6 Reserved */
- u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
- u16 flockdn :1; /* bit 15 Flash Configuration Lock-Down */
-#endif
- } hsf_status;
- u16 regval;
-};
-
-/* ICH8 GbE Flash Hardware Sequencing Flash control Register bit breakdown */
-/* Offset 06h FLCTL */
-union ich8_hws_flash_ctrl {
- struct ich8_hsflctl {
-#ifdef __BIG_ENDIAN
- u16 fldbcount :2;
- u16 flockdn :6;
- u16 flcgo :1;
- u16 flcycle :2;
- u16 reserved :5;
-#else
- u16 flcgo :1; /* 0 Flash Cycle Go */
- u16 flcycle :2; /* 2:1 Flash Cycle */
- u16 reserved :5; /* 7:3 Reserved */
- u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
- u16 flockdn :6; /* 15:10 Reserved */
-#endif
- } hsf_ctrl;
- u16 regval;
-};
-
-/* ICH8 Flash Region Access Permissions */
-union ich8_hws_flash_regacc {
- struct ich8_flracc {
-#ifdef __BIG_ENDIAN
- u32 gmwag :8;
- u32 gmrag :8;
- u32 grwa :8;
- u32 grra :8;
-#else
- u32 grra :8; /* 0:7 GbE region Read Access */
- u32 grwa :8; /* 8:15 GbE region Write Access */
- u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
- u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
-#endif
- } hsf_flregacc;
- u16 regval;
-};
-
/* Miscellaneous PHY bit definitions. */
#define PHY_PREAMBLE 0xFFFFFFFF
#define PHY_SOF 0x01
#define MII_CR_SPEED_100 0x2000
#define MII_CR_SPEED_10 0x0000
#define E1000_PHY_ADDRESS 0x01
-#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
-#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
#define PHY_REVISION_MASK 0xFFFFFFF0
-#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
+#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
#define REG4_SPEED_MASK 0x01E0
#define REG9_SPEED_MASK 0x0300
#define ADVERTISE_10_HALF 0x0001
#define ADVERTISE_100_FULL 0x0008
#define ADVERTISE_1000_HALF 0x0010
#define ADVERTISE_1000_FULL 0x0020
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
-#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds*/
-#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds*/
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
#endif /* _E1000_HW_H_ */
char e1000_driver_name[] = "e1000";
static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.21-k3-NAPI"
+#define DRV_VERSION "7.3.21-k5-NAPI"
const char e1000_driver_version[] = DRV_VERSION;
static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
static int e1000_set_mac(struct net_device *netdev, void *p);
static irqreturn_t e1000_intr(int irq, void *data);
-static irqreturn_t e1000_intr_msi(int irq, void *data);
static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
struct e1000_tx_ring *tx_ring);
static int e1000_clean(struct napi_struct *napi, int budget);
static int e1000_request_irq(struct e1000_adapter *adapter)
{
- struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
irq_handler_t handler = e1000_intr;
int irq_flags = IRQF_SHARED;
int err;
- if (hw->mac_type >= e1000_82571) {
- adapter->have_msi = !pci_enable_msi(adapter->pdev);
- if (adapter->have_msi) {
- handler = e1000_intr_msi;
- irq_flags = 0;
- }
- }
-
err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
netdev);
if (err) {
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
DPRINTK(PROBE, ERR,
"Unable to allocate interrupt Error: %d\n", err);
}
struct net_device *netdev = adapter->netdev;
free_irq(adapter->pdev->irq, netdev);
-
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
}
/**
}
}
-/**
- * e1000_release_hw_control - release control of the h/w to f/w
- * @adapter: address of board private structure
- *
- * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that the
- * driver is no longer loaded. For AMT version (only with 82573) i
- * of the f/w this means that the network i/f is closed.
- *
- **/
-
-static void e1000_release_hw_control(struct e1000_adapter *adapter)
-{
- u32 ctrl_ext;
- u32 swsm;
- struct e1000_hw *hw = &adapter->hw;
-
- /* Let firmware taken over control of h/w */
- switch (hw->mac_type) {
- case e1000_82573:
- swsm = er32(SWSM);
- ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
- break;
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
- case e1000_ich8lan:
- ctrl_ext = er32(CTRL_EXT);
- ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
- break;
- default:
- break;
- }
-}
-
-/**
- * e1000_get_hw_control - get control of the h/w from f/w
- * @adapter: address of board private structure
- *
- * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that
- * the driver is loaded. For AMT version (only with 82573)
- * of the f/w this means that the network i/f is open.
- *
- **/
-
-static void e1000_get_hw_control(struct e1000_adapter *adapter)
-{
- u32 ctrl_ext;
- u32 swsm;
- struct e1000_hw *hw = &adapter->hw;
-
- /* Let firmware know the driver has taken over */
- switch (hw->mac_type) {
- case e1000_82573:
- swsm = er32(SWSM);
- ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
- break;
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
- case e1000_ich8lan:
- ctrl_ext = er32(CTRL_EXT);
- ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
- break;
- default:
- break;
- }
-}
-
static void e1000_init_manageability(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
/* disable hardware interception of ARP */
manc &= ~(E1000_MANC_ARP_EN);
- /* enable receiving management packets to the host */
- /* this will probably generate destination unreachable messages
- * from the host OS, but the packets will be handled on SMBUS */
- if (hw->has_manc2h) {
- u32 manc2h = er32(MANC2H);
-
- manc |= E1000_MANC_EN_MNG2HOST;
-#define E1000_MNG2HOST_PORT_623 (1 << 5)
-#define E1000_MNG2HOST_PORT_664 (1 << 6)
- manc2h |= E1000_MNG2HOST_PORT_623;
- manc2h |= E1000_MNG2HOST_PORT_664;
- ew32(MANC2H, manc2h);
- }
-
ew32(MANC, manc);
}
}
/* re-enable hardware interception of ARP */
manc |= E1000_MANC_ARP_EN;
- if (hw->has_manc2h)
- manc &= ~E1000_MANC_EN_MNG2HOST;
-
- /* don't explicitly have to mess with MANC2H since
- * MANC has an enable disable that gates MANC2H */
-
ew32(MANC, manc);
}
}
if (er32(MANC) & E1000_MANC_SMBUS_EN)
goto out;
break;
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- case e1000_80003es2lan:
- case e1000_ich8lan:
- if (e1000_check_mng_mode(hw) ||
- e1000_check_phy_reset_block(hw))
- goto out;
- break;
default:
goto out;
}
ew32(RCTL, rctl & ~E1000_RCTL_EN);
/* flush and sleep below */
- /* can be netif_tx_disable when NETIF_F_LLTX is removed */
- netif_stop_queue(netdev);
+ netif_tx_disable(netdev);
/* disable transmits in the hardware */
tctl = er32(TCTL);
legacy_pba_adjust = true;
pba = E1000_PBA_30K;
break;
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
- pba = E1000_PBA_38K;
- break;
- case e1000_82573:
- pba = E1000_PBA_20K;
- break;
- case e1000_ich8lan:
- pba = E1000_PBA_8K;
case e1000_undefined:
case e1000_num_macs:
break;
/* if short on rx space, rx wins and must trump tx
* adjustment or use Early Receive if available */
- if (pba < min_rx_space) {
- switch (hw->mac_type) {
- case e1000_82573:
- /* ERT enabled in e1000_configure_rx */
- break;
- default:
- pba = min_rx_space;
- break;
- }
- }
+ if (pba < min_rx_space)
+ pba = min_rx_space;
}
}
/* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
if (hw->mac_type >= e1000_82544 &&
- hw->mac_type <= e1000_82547_rev_2 &&
hw->autoneg == 1 &&
hw->autoneg_advertised == ADVERTISE_1000_FULL) {
u32 ctrl = er32(CTRL);
e1000_reset_adaptive(hw);
e1000_phy_get_info(hw, &adapter->phy_info);
- if (!adapter->smart_power_down &&
- (hw->mac_type == e1000_82571 ||
- hw->mac_type == e1000_82572)) {
- u16 phy_data = 0;
- /* speed up time to link by disabling smart power down, ignore
- * the return value of this function because there is nothing
- * different we would do if it failed */
- e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
- &phy_data);
- phy_data &= ~IGP02E1000_PM_SPD;
- e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT,
- phy_data);
- }
-
e1000_release_manageability(adapter);
}
goto err_sw_init;
err = -EIO;
- /* Flash BAR mapping must happen after e1000_sw_init
- * because it depends on mac_type */
- if ((hw->mac_type == e1000_ich8lan) &&
- (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
- hw->flash_address = pci_ioremap_bar(pdev, 1);
- if (!hw->flash_address)
- goto err_flashmap;
- }
-
- if (e1000_check_phy_reset_block(hw))
- DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n");
if (hw->mac_type >= e1000_82543) {
netdev->features = NETIF_F_SG |
NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
NETIF_F_HW_VLAN_FILTER;
- if (hw->mac_type == e1000_ich8lan)
- netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
}
if ((hw->mac_type >= e1000_82544) &&
(hw->mac_type != e1000_82547))
netdev->features |= NETIF_F_TSO;
- if (hw->mac_type > e1000_82547_rev_2)
- netdev->features |= NETIF_F_TSO6;
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
netdev->vlan_features |= NETIF_F_TSO;
- netdev->vlan_features |= NETIF_F_TSO6;
netdev->vlan_features |= NETIF_F_HW_CSUM;
netdev->vlan_features |= NETIF_F_SG;
EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
eeprom_apme_mask = E1000_EEPROM_82544_APM;
break;
- case e1000_ich8lan:
- e1000_read_eeprom(hw,
- EEPROM_INIT_CONTROL1_REG, 1, &eeprom_data);
- eeprom_apme_mask = E1000_EEPROM_ICH8_APME;
- break;
case e1000_82546:
case e1000_82546_rev_3:
- case e1000_82571:
- case e1000_80003es2lan:
if (er32(STATUS) & E1000_STATUS_FUNC_1){
e1000_read_eeprom(hw,
EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
break;
case E1000_DEV_ID_82546EB_FIBER:
case E1000_DEV_ID_82546GB_FIBER:
- case E1000_DEV_ID_82571EB_FIBER:
/* Wake events only supported on port A for dual fiber
* regardless of eeprom setting */
if (er32(STATUS) & E1000_STATUS_FUNC_1)
adapter->eeprom_wol = 0;
break;
case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- case E1000_DEV_ID_82571EB_QUAD_COPPER:
- case E1000_DEV_ID_82571EB_QUAD_FIBER:
- case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE:
- case E1000_DEV_ID_82571PT_QUAD_COPPER:
/* if quad port adapter, disable WoL on all but port A */
if (global_quad_port_a != 0)
adapter->eeprom_wol = 0;
/* print bus type/speed/width info */
DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
- ((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
- (hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
- ((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
- (hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
+ ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+ ((hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
(hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
(hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
(hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
- ((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
- (hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
- (hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
- "32-bit"));
+ ((hw->bus_width == e1000_bus_width_64) ? "64-bit" : "32-bit"));
printk("%pM\n", netdev->dev_addr);
- if (hw->bus_type == e1000_bus_type_pci_express) {
- DPRINTK(PROBE, WARNING, "This device (id %04x:%04x) will no "
- "longer be supported by this driver in the future.\n",
- pdev->vendor, pdev->device);
- DPRINTK(PROBE, WARNING, "please use the \"e1000e\" "
- "driver instead.\n");
- }
-
/* reset the hardware with the new settings */
e1000_reset(adapter);
- /* If the controller is 82573 and f/w is AMT, do not set
- * DRV_LOAD until the interface is up. For all other cases,
- * let the f/w know that the h/w is now under the control
- * of the driver. */
- if (hw->mac_type != e1000_82573 ||
- !e1000_check_mng_mode(hw))
- e1000_get_hw_control(adapter);
-
strcpy(netdev->name, "eth%d");
err = register_netdev(netdev);
if (err)
return 0;
err_register:
- e1000_release_hw_control(adapter);
err_eeprom:
- if (!e1000_check_phy_reset_block(hw))
- e1000_phy_hw_reset(hw);
+ e1000_phy_hw_reset(hw);
if (hw->flash_address)
iounmap(hw->flash_address);
-err_flashmap:
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
err_sw_init:
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
+ set_bit(__E1000_DOWN, &adapter->flags);
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
cancel_work_sync(&adapter->reset_task);
e1000_release_manageability(adapter);
- /* Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant. */
- e1000_release_hw_control(adapter);
-
unregister_netdev(netdev);
- if (!e1000_check_phy_reset_block(hw))
- e1000_phy_hw_reset(hw);
+ e1000_phy_hw_reset(hw);
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
e1000_update_mng_vlan(adapter);
}
- /* If AMT is enabled, let the firmware know that the network
- * interface is now open */
- if (hw->mac_type == e1000_82573 &&
- e1000_check_mng_mode(hw))
- e1000_get_hw_control(adapter);
-
/* before we allocate an interrupt, we must be ready to handle it.
* Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
* as soon as we call pci_request_irq, so we have to setup our
return E1000_SUCCESS;
err_req_irq:
- e1000_release_hw_control(adapter);
e1000_power_down_phy(adapter);
e1000_free_all_rx_resources(adapter);
err_setup_rx:
e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
}
- /* If AMT is enabled, let the firmware know that the network
- * interface is now closed */
- if (hw->mac_type == e1000_82573 &&
- e1000_check_mng_mode(hw))
- e1000_release_hw_control(adapter);
-
return 0;
}
{
u64 tdba;
struct e1000_hw *hw = &adapter->hw;
- u32 tdlen, tctl, tipg, tarc;
+ u32 tdlen, tctl, tipg;
u32 ipgr1, ipgr2;
/* Setup the HW Tx Head and Tail descriptor pointers */
}
/* Set the default values for the Tx Inter Packet Gap timer */
- if (hw->mac_type <= e1000_82547_rev_2 &&
- (hw->media_type == e1000_media_type_fiber ||
+ if ((hw->media_type == e1000_media_type_fiber ||
hw->media_type == e1000_media_type_internal_serdes))
tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
else
ipgr1 = DEFAULT_82542_TIPG_IPGR1;
ipgr2 = DEFAULT_82542_TIPG_IPGR2;
break;
- case e1000_80003es2lan:
- ipgr1 = DEFAULT_82543_TIPG_IPGR1;
- ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2;
- break;
default:
ipgr1 = DEFAULT_82543_TIPG_IPGR1;
ipgr2 = DEFAULT_82543_TIPG_IPGR2;
tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
- if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) {
- tarc = er32(TARC0);
- /* set the speed mode bit, we'll clear it if we're not at
- * gigabit link later */
- tarc |= (1 << 21);
- ew32(TARC0, tarc);
- } else if (hw->mac_type == e1000_80003es2lan) {
- tarc = er32(TARC0);
- tarc |= 1;
- ew32(TARC0, tarc);
- tarc = er32(TARC1);
- tarc |= 1;
- ew32(TARC1, tarc);
- }
-
e1000_config_collision_dist(hw);
/* Setup Transmit Descriptor Settings for eop descriptor */
static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
struct e1000_rx_ring *rxdr)
{
- struct e1000_hw *hw = &adapter->hw;
struct pci_dev *pdev = adapter->pdev;
int size, desc_len;
}
memset(rxdr->buffer_info, 0, size);
- if (hw->mac_type <= e1000_82547_rev_2)
- desc_len = sizeof(struct e1000_rx_desc);
- else
- desc_len = sizeof(union e1000_rx_desc_packet_split);
+ desc_len = sizeof(struct e1000_rx_desc);
/* Round up to nearest 4K */
{
u64 rdba;
struct e1000_hw *hw = &adapter->hw;
- u32 rdlen, rctl, rxcsum, ctrl_ext;
+ u32 rdlen, rctl, rxcsum;
if (adapter->netdev->mtu > ETH_DATA_LEN) {
rdlen = adapter->rx_ring[0].count *
ew32(ITR, 1000000000 / (adapter->itr * 256));
}
- if (hw->mac_type >= e1000_82571) {
- ctrl_ext = er32(CTRL_EXT);
- /* Reset delay timers after every interrupt */
- ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR;
- /* Auto-Mask interrupts upon ICR access */
- ctrl_ext |= E1000_CTRL_EXT_IAME;
- ew32(IAM, 0xffffffff);
- ew32(CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH();
- }
-
/* Setup the HW Rx Head and Tail Descriptor Pointers and
* the Base and Length of the Rx Descriptor Ring */
switch (adapter->num_rx_queues) {
e1000_rar_set(hw, hw->mac_addr, 0);
- /* With 82571 controllers, LAA may be overwritten (with the default)
- * due to controller reset from the other port. */
- if (hw->mac_type == e1000_82571) {
- /* activate the work around */
- hw->laa_is_present = 1;
-
- /* Hold a copy of the LAA in RAR[14] This is done so that
- * between the time RAR[0] gets clobbered and the time it
- * gets fixed (in e1000_watchdog), the actual LAA is in one
- * of the RARs and no incoming packets directed to this port
- * are dropped. Eventaully the LAA will be in RAR[0] and
- * RAR[14] */
- e1000_rar_set(hw, hw->mac_addr,
- E1000_RAR_ENTRIES - 1);
- }
-
if (hw->mac_type == e1000_82542_rev2_0)
e1000_leave_82542_rst(adapter);
u32 rctl;
u32 hash_value;
int i, rar_entries = E1000_RAR_ENTRIES;
- int mta_reg_count = (hw->mac_type == e1000_ich8lan) ?
- E1000_NUM_MTA_REGISTERS_ICH8LAN :
- E1000_NUM_MTA_REGISTERS;
+ int mta_reg_count = E1000_NUM_MTA_REGISTERS;
u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
if (!mcarray) {
return;
}
- if (hw->mac_type == e1000_ich8lan)
- rar_entries = E1000_RAR_ENTRIES_ICH8LAN;
-
- /* reserve RAR[14] for LAA over-write work-around */
- if (hw->mac_type == e1000_82571)
- rar_entries--;
-
/* Check for Promiscuous and All Multicast modes */
rctl = er32(RCTL);
rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
rctl &= ~E1000_RCTL_VFE;
} else {
- if (netdev->flags & IFF_ALLMULTI) {
+ if (netdev->flags & IFF_ALLMULTI)
rctl |= E1000_RCTL_MPE;
- } else {
+ else
rctl &= ~E1000_RCTL_MPE;
- }
- if (adapter->hw.mac_type != e1000_ich8lan)
- /* Enable VLAN filter if there is a VLAN */
- if (adapter->vlgrp)
- rctl |= E1000_RCTL_VFE;
+ /* Enable VLAN filter if there is a VLAN */
+ if (adapter->vlgrp)
+ rctl |= E1000_RCTL_VFE;
}
if (netdev->uc.count > rar_entries - 1) {
*
* RAR 0 is used for the station MAC adddress
* if there are not 14 addresses, go ahead and clear the filters
- * -- with 82571 controllers only 0-13 entries are filled here
*/
i = 1;
if (use_uc)
adapter->tx_fifo_head = 0;
atomic_set(&adapter->tx_fifo_stall, 0);
netif_wake_queue(netdev);
- } else {
+ } else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
}
}
}
+static bool e1000_has_link(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = false;
+
+ /* get_link_status is set on LSC (link status) interrupt or
+ * rx sequence error interrupt. get_link_status will stay
+ * false until the e1000_check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->media_type) {
+ case e1000_media_type_copper:
+ if (hw->get_link_status) {
+ e1000_check_for_link(hw);
+ link_active = !hw->get_link_status;
+ } else {
+ link_active = true;
+ }
+ break;
+ case e1000_media_type_fiber:
+ e1000_check_for_link(hw);
+ link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+ break;
+ case e1000_media_type_internal_serdes:
+ e1000_check_for_link(hw);
+ link_active = hw->serdes_has_link;
+ break;
+ default:
+ break;
+ }
+
+ return link_active;
+}
+
/**
* e1000_watchdog - Timer Call-back
* @data: pointer to adapter cast into an unsigned long
struct net_device *netdev = adapter->netdev;
struct e1000_tx_ring *txdr = adapter->tx_ring;
u32 link, tctl;
- s32 ret_val;
-
- ret_val = e1000_check_for_link(hw);
- if ((ret_val == E1000_ERR_PHY) &&
- (hw->phy_type == e1000_phy_igp_3) &&
- (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
- /* See e1000_kumeran_lock_loss_workaround() */
- DPRINTK(LINK, INFO,
- "Gigabit has been disabled, downgrading speed\n");
- }
- if (hw->mac_type == e1000_82573) {
- e1000_enable_tx_pkt_filtering(hw);
- if (adapter->mng_vlan_id != hw->mng_cookie.vlan_id)
- e1000_update_mng_vlan(adapter);
- }
-
- if ((hw->media_type == e1000_media_type_internal_serdes) &&
- !(er32(TXCW) & E1000_TXCW_ANE))
- link = !hw->serdes_link_down;
- else
- link = er32(STATUS) & E1000_STATUS_LU;
+ link = e1000_has_link(adapter);
+ if ((netif_carrier_ok(netdev)) && link)
+ goto link_up;
if (link) {
if (!netif_carrier_ok(netdev)) {
u32 ctrl;
bool txb2b = true;
+ /* update snapshot of PHY registers on LSC */
e1000_get_speed_and_duplex(hw,
&adapter->link_speed,
&adapter->link_duplex);
case SPEED_10:
txb2b = false;
netdev->tx_queue_len = 10;
- adapter->tx_timeout_factor = 8;
+ adapter->tx_timeout_factor = 16;
break;
case SPEED_100:
txb2b = false;
break;
}
- if ((hw->mac_type == e1000_82571 ||
- hw->mac_type == e1000_82572) &&
- !txb2b) {
- u32 tarc0;
- tarc0 = er32(TARC0);
- tarc0 &= ~(1 << 21);
- ew32(TARC0, tarc0);
- }
-
- /* disable TSO for pcie and 10/100 speeds, to avoid
- * some hardware issues */
- if (!adapter->tso_force &&
- hw->bus_type == e1000_bus_type_pci_express){
- switch (adapter->link_speed) {
- case SPEED_10:
- case SPEED_100:
- DPRINTK(PROBE,INFO,
- "10/100 speed: disabling TSO\n");
- netdev->features &= ~NETIF_F_TSO;
- netdev->features &= ~NETIF_F_TSO6;
- break;
- case SPEED_1000:
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
- break;
- default:
- /* oops */
- break;
- }
- }
-
- /* enable transmits in the hardware, need to do this
- * after setting TARC0 */
+ /* enable transmits in the hardware */
tctl = er32(TCTL);
tctl |= E1000_TCTL_EN;
ew32(TCTL, tctl);
netif_carrier_on(netdev);
- mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
adapter->smartspeed = 0;
- } else {
- /* make sure the receive unit is started */
- if (hw->rx_needs_kicking) {
- u32 rctl = er32(RCTL);
- ew32(RCTL, rctl | E1000_RCTL_EN);
- }
}
} else {
if (netif_carrier_ok(netdev)) {
printk(KERN_INFO "e1000: %s NIC Link is Down\n",
netdev->name);
netif_carrier_off(netdev);
- mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ));
-
- /* 80003ES2LAN workaround--
- * For packet buffer work-around on link down event;
- * disable receives in the ISR and
- * reset device here in the watchdog
- */
- if (hw->mac_type == e1000_80003es2lan)
- /* reset device */
- schedule_work(&adapter->reset_task);
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
}
e1000_smartspeed(adapter);
}
+link_up:
e1000_update_stats(adapter);
hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
/* Force detection of hung controller every watchdog period */
adapter->detect_tx_hung = true;
- /* With 82571 controllers, LAA may be overwritten due to controller
- * reset from the other port. Set the appropriate LAA in RAR[0] */
- if (hw->mac_type == e1000_82571 && hw->laa_is_present)
- e1000_rar_set(hw, hw->mac_addr, 0);
-
/* Reset the timer */
- mod_timer(&adapter->watchdog_timer, round_jiffies(jiffies + 2 * HZ));
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
}
enum latency_range {
/**
* e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
* Stores a new ITR value based on packets and byte
* counts during the last interrupt. The advantage of per interrupt
* computation is faster updates and more accurate ITR for the current
* while increasing bulk throughput.
* this functionality is controlled by the InterruptThrottleRate module
* parameter (see e1000_param.c)
- * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
**/
static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
u16 itr_setting, int packets, int bytes)
size -= 4;
buffer_info->length = size;
- buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
+ /* set time_stamp *before* dma to help avoid a possible race */
buffer_info->time_stamp = jiffies;
+ buffer_info->dma = skb_shinfo(skb)->dma_head + offset;
buffer_info->next_to_watch = i;
len -= size;
* Avoid terminating buffers within evenly-aligned
* dwords. */
if (unlikely(adapter->pcix_82544 &&
- !((unsigned long)(frag->page+offset+size-1) & 4) &&
- size > 4))
+ !((unsigned long)(page_to_phys(frag->page) + offset
+ + size - 1) & 4) &&
+ size > 4))
size -= 4;
buffer_info->length = size;
- buffer_info->dma = map[f] + offset;
buffer_info->time_stamp = jiffies;
+ buffer_info->dma = map[f] + offset;
buffer_info->next_to_watch = i;
len -= size;
return 0;
}
-#define MINIMUM_DHCP_PACKET_SIZE 282
-static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
- struct sk_buff *skb)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 length, offset;
- if (vlan_tx_tag_present(skb)) {
- if (!((vlan_tx_tag_get(skb) == hw->mng_cookie.vlan_id) &&
- ( hw->mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) )
- return 0;
- }
- if (skb->len > MINIMUM_DHCP_PACKET_SIZE) {
- struct ethhdr *eth = (struct ethhdr *)skb->data;
- if ((htons(ETH_P_IP) == eth->h_proto)) {
- const struct iphdr *ip =
- (struct iphdr *)((u8 *)skb->data+14);
- if (IPPROTO_UDP == ip->protocol) {
- struct udphdr *udp =
- (struct udphdr *)((u8 *)ip +
- (ip->ihl << 2));
- if (ntohs(udp->dest) == 67) {
- offset = (u8 *)udp + 8 - skb->data;
- length = skb->len - offset;
-
- return e1000_mng_write_dhcp_info(hw,
- (u8 *)udp + 8,
- length);
- }
- }
- }
- }
- return 0;
-}
-
static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
return NETDEV_TX_OK;
}
- /* 82571 and newer doesn't need the workaround that limited descriptor
- * length to 4kB */
- if (hw->mac_type >= e1000_82571)
- max_per_txd = 8192;
-
mss = skb_shinfo(skb)->gso_size;
/* The controller does a simple calculation to
* make sure there is enough room in the FIFO before
max_per_txd = min(mss << 2, max_per_txd);
max_txd_pwr = fls(max_per_txd) - 1;
- /* TSO Workaround for 82571/2/3 Controllers -- if skb->data
- * points to just header, pull a few bytes of payload from
- * frags into skb->data */
hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
if (skb->data_len && hdr_len == len) {
switch (hw->mac_type) {
if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
break;
/* fall through */
- case e1000_82571:
- case e1000_82572:
- case e1000_82573:
- case e1000_ich8lan:
pull_size = min((unsigned int)4, skb->data_len);
if (!__pskb_pull_tail(skb, pull_size)) {
DPRINTK(DRV, ERR,
if (adapter->pcix_82544)
count += nr_frags;
-
- if (hw->tx_pkt_filtering &&
- (hw->mac_type == e1000_82573))
- e1000_transfer_dhcp_info(adapter, skb);
-
/* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time */
if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
if (unlikely(hw->mac_type == e1000_82547)) {
if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
netif_stop_queue(netdev);
- mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->tx_fifo_stall_timer,
+ jiffies + 1);
return NETDEV_TX_BUSY;
}
}
}
if (likely(tso)) {
- tx_ring->last_tx_tso = 1;
+ if (likely(hw->mac_type != e1000_82544))
+ tx_ring->last_tx_tso = 1;
tx_flags |= E1000_TX_FLAGS_TSO;
} else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
tx_flags |= E1000_TX_FLAGS_CSUM;
- /* Old method was to assume IPv4 packet by default if TSO was enabled.
- * 82571 hardware supports TSO capabilities for IPv6 as well...
- * no longer assume, we must. */
if (likely(skb->protocol == htons(ETH_P_IP)))
tx_flags |= E1000_TX_FLAGS_IPV4;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
- u16 eeprom_data = 0;
if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
(max_frame > MAX_JUMBO_FRAME_SIZE)) {
/* Adapter-specific max frame size limits. */
switch (hw->mac_type) {
case e1000_undefined ... e1000_82542_rev2_1:
- case e1000_ich8lan:
if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n");
return -EINVAL;
}
break;
- case e1000_82573:
- /* Jumbo Frames not supported if:
- * - this is not an 82573L device
- * - ASPM is enabled in any way (0x1A bits 3:2) */
- e1000_read_eeprom(hw, EEPROM_INIT_3GIO_3, 1,
- &eeprom_data);
- if ((hw->device_id != E1000_DEV_ID_82573L) ||
- (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) {
- if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
- DPRINTK(PROBE, ERR,
- "Jumbo Frames not supported.\n");
- return -EINVAL;
- }
- break;
- }
- /* ERT will be enabled later to enable wire speed receives */
-
- /* fall through to get support */
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
-#define MAX_STD_JUMBO_FRAME_SIZE 9234
- if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
- DPRINTK(PROBE, ERR, "MTU > 9216 not supported.\n");
- return -EINVAL;
- }
- break;
default:
/* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
break;
}
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ /* e1000_down has a dependency on max_frame_size */
+ hw->max_frame_size = max_frame;
+ if (netif_running(netdev))
+ e1000_down(adapter);
+
/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
* means we reserve 2 more, this pushes us to allocate from the next
* larger slab size.
(max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ printk(KERN_INFO "e1000: %s changing MTU from %d to %d\n",
+ netdev->name, netdev->mtu, new_mtu);
netdev->mtu = new_mtu;
- hw->max_frame_size = max_frame;
if (netif_running(netdev))
- e1000_reinit_locked(adapter);
+ e1000_up(adapter);
+ else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
return 0;
}
adapter->stats.mprc += er32(MPRC);
adapter->stats.roc += er32(ROC);
- if (hw->mac_type != e1000_ich8lan) {
- adapter->stats.prc64 += er32(PRC64);
- adapter->stats.prc127 += er32(PRC127);
- adapter->stats.prc255 += er32(PRC255);
- adapter->stats.prc511 += er32(PRC511);
- adapter->stats.prc1023 += er32(PRC1023);
- adapter->stats.prc1522 += er32(PRC1522);
- }
+ adapter->stats.prc64 += er32(PRC64);
+ adapter->stats.prc127 += er32(PRC127);
+ adapter->stats.prc255 += er32(PRC255);
+ adapter->stats.prc511 += er32(PRC511);
+ adapter->stats.prc1023 += er32(PRC1023);
+ adapter->stats.prc1522 += er32(PRC1522);
adapter->stats.symerrs += er32(SYMERRS);
adapter->stats.mpc += er32(MPC);
adapter->stats.toth += er32(TOTH);
adapter->stats.tpr += er32(TPR);
- if (hw->mac_type != e1000_ich8lan) {
- adapter->stats.ptc64 += er32(PTC64);
- adapter->stats.ptc127 += er32(PTC127);
- adapter->stats.ptc255 += er32(PTC255);
- adapter->stats.ptc511 += er32(PTC511);
- adapter->stats.ptc1023 += er32(PTC1023);
- adapter->stats.ptc1522 += er32(PTC1522);
- }
+ adapter->stats.ptc64 += er32(PTC64);
+ adapter->stats.ptc127 += er32(PTC127);
+ adapter->stats.ptc255 += er32(PTC255);
+ adapter->stats.ptc511 += er32(PTC511);
+ adapter->stats.ptc1023 += er32(PTC1023);
+ adapter->stats.ptc1522 += er32(PTC1522);
adapter->stats.mptc += er32(MPTC);
adapter->stats.bptc += er32(BPTC);
adapter->stats.tsctc += er32(TSCTC);
adapter->stats.tsctfc += er32(TSCTFC);
}
- if (hw->mac_type > e1000_82547_rev_2) {
- adapter->stats.iac += er32(IAC);
- adapter->stats.icrxoc += er32(ICRXOC);
-
- if (hw->mac_type != e1000_ich8lan) {
- adapter->stats.icrxptc += er32(ICRXPTC);
- adapter->stats.icrxatc += er32(ICRXATC);
- adapter->stats.ictxptc += er32(ICTXPTC);
- adapter->stats.ictxatc += er32(ICTXATC);
- adapter->stats.ictxqec += er32(ICTXQEC);
- adapter->stats.ictxqmtc += er32(ICTXQMTC);
- adapter->stats.icrxdmtc += er32(ICRXDMTC);
- }
- }
/* Fill out the OS statistics structure */
adapter->net_stats.multicast = adapter->stats.mprc;
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
-/**
- * e1000_intr_msi - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-
-static irqreturn_t e1000_intr_msi(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 icr = er32(ICR);
-
- /* in NAPI mode read ICR disables interrupts using IAM */
-
- if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
- hw->get_link_status = 1;
- /* 80003ES2LAN workaround-- For packet buffer work-around on
- * link down event; disable receives here in the ISR and reset
- * adapter in watchdog */
- if (netif_carrier_ok(netdev) &&
- (hw->mac_type == e1000_80003es2lan)) {
- /* disable receives */
- u32 rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- }
- /* guard against interrupt when we're going down */
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
- if (likely(napi_schedule_prep(&adapter->napi))) {
- adapter->total_tx_bytes = 0;
- adapter->total_tx_packets = 0;
- adapter->total_rx_bytes = 0;
- adapter->total_rx_packets = 0;
- __napi_schedule(&adapter->napi);
- } else
- e1000_irq_enable(adapter);
-
- return IRQ_HANDLED;
-}
-
/**
* e1000_intr - Interrupt Handler
* @irq: interrupt number
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u32 rctl, icr = er32(ICR);
+ u32 icr = er32(ICR);
if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
return IRQ_NONE; /* Not our interrupt */
- /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
- * not set, then the adapter didn't send an interrupt */
- if (unlikely(hw->mac_type >= e1000_82571 &&
- !(icr & E1000_ICR_INT_ASSERTED)))
- return IRQ_NONE;
-
- /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
- * need for the IMC write */
-
if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
hw->get_link_status = 1;
- /* 80003ES2LAN workaround--
- * For packet buffer work-around on link down event;
- * disable receives here in the ISR and
- * reset adapter in watchdog
- */
- if (netif_carrier_ok(netdev) &&
- (hw->mac_type == e1000_80003es2lan)) {
- /* disable receives */
- rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- }
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->flags))
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
- if (unlikely(hw->mac_type < e1000_82571)) {
- /* disable interrupts, without the synchronize_irq bit */
- ew32(IMC, ~0);
- E1000_WRITE_FLUSH();
- }
+ /* disable interrupts, without the synchronize_irq bit */
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+
if (likely(napi_schedule_prep(&adapter->napi))) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
static int e1000_clean(struct napi_struct *napi, int budget)
{
struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
- struct net_device *poll_dev = adapter->netdev;
- int tx_cleaned = 0, work_done = 0;
-
- adapter = netdev_priv(poll_dev);
+ int tx_clean_complete = 0, work_done = 0;
- tx_cleaned = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
+ tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
- adapter->clean_rx(adapter, &adapter->rx_ring[0],
- &work_done, budget);
+ adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget);
- if (!tx_cleaned)
+ if (!tx_clean_complete)
work_done = budget;
/* If budget not fully consumed, exit the polling mode */
* sees the new next_to_clean.
*/
smp_mb();
- if (netif_queue_stopped(netdev)) {
+
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__E1000_DOWN, &adapter->flags))) {
netif_wake_queue(netdev);
++adapter->restart_queue;
}
/* Detect a transmit hang in hardware, this serializes the
* check with the clearing of time_stamp and movement of i */
adapter->detect_tx_hung = false;
- if (tx_ring->buffer_info[i].time_stamp &&
- time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
+ if (tx_ring->buffer_info[eop].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
(adapter->tx_timeout_factor * HZ))
&& !(er32(STATUS) & E1000_STATUS_TXOFF)) {
readl(hw->hw_addr + tx_ring->tdt),
tx_ring->next_to_use,
tx_ring->next_to_clean,
- tx_ring->buffer_info[i].time_stamp,
+ tx_ring->buffer_info[eop].time_stamp,
eop,
jiffies,
eop_desc->upper.fields.status);
return;
}
/* TCP/UDP Checksum has not been calculated */
- if (hw->mac_type <= e1000_82547_rev_2) {
- if (!(status & E1000_RXD_STAT_TCPCS))
- return;
- } else {
- if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
- return;
- }
+ if (!(status & E1000_RXD_STAT_TCPCS))
+ return;
+
/* It must be a TCP or UDP packet with a valid checksum */
if (likely(status & E1000_RXD_STAT_TCPCS)) {
/* TCP checksum is good */
skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else if (hw->mac_type > e1000_82547_rev_2) {
- /* IP fragment with UDP payload */
- /* Hardware complements the payload checksum, so we undo it
- * and then put the value in host order for further stack use.
- */
- __sum16 sum = (__force __sum16)htons(csum);
- skb->csum = csum_unfold(~sum);
- skb->ip_summed = CHECKSUM_COMPLETE;
}
adapter->hw_csum_good++;
}
pcix_set_mmrbc(adapter->pdev, mmrbc);
}
-s32 e1000_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
-{
- struct e1000_adapter *adapter = hw->back;
- u16 cap_offset;
-
- cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
- if (!cap_offset)
- return -E1000_ERR_CONFIG;
-
- pci_read_config_word(adapter->pdev, cap_offset + reg, value);
-
- return E1000_SUCCESS;
-}
-
void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
{
outl(value, port);
ctrl |= E1000_CTRL_VME;
ew32(CTRL, ctrl);
- if (adapter->hw.mac_type != e1000_ich8lan) {
- /* enable VLAN receive filtering */
- rctl = er32(RCTL);
- rctl &= ~E1000_RCTL_CFIEN;
- if (!(netdev->flags & IFF_PROMISC))
- rctl |= E1000_RCTL_VFE;
- ew32(RCTL, rctl);
- e1000_update_mng_vlan(adapter);
- }
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ if (!(netdev->flags & IFF_PROMISC))
+ rctl |= E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
} else {
/* disable VLAN tag insert/strip */
ctrl = er32(CTRL);
ctrl &= ~E1000_CTRL_VME;
ew32(CTRL, ctrl);
- if (adapter->hw.mac_type != e1000_ich8lan) {
- /* disable VLAN receive filtering */
- rctl = er32(RCTL);
- rctl &= ~E1000_RCTL_VFE;
- ew32(RCTL, rctl);
+ /* disable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
- if (adapter->mng_vlan_id !=
- (u16)E1000_MNG_VLAN_NONE) {
- e1000_vlan_rx_kill_vid(netdev,
- adapter->mng_vlan_id);
- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- }
+ if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
}
}
if (!test_bit(__E1000_DOWN, &adapter->flags))
e1000_irq_enable(adapter);
- if ((hw->mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
- (vid == adapter->mng_vlan_id)) {
- /* release control to f/w */
- e1000_release_hw_control(adapter);
- return;
- }
-
/* remove VID from filter table */
index = (vid >> 5) & 0x7F;
vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
}
if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
+ hw->media_type == e1000_media_type_internal_serdes) {
/* keep the laser running in D3 */
ctrl_ext = er32(CTRL_EXT);
ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
ew32(CTRL_EXT, ctrl_ext);
}
- /* Allow time for pending master requests to run */
- e1000_disable_pciex_master(hw);
-
ew32(WUC, E1000_WUC_PME_EN);
ew32(WUFC, wufc);
} else {
if (adapter->en_mng_pt)
*enable_wake = true;
- if (hw->phy_type == e1000_phy_igp_3)
- e1000_phy_powerdown_workaround(hw);
-
if (netif_running(netdev))
e1000_free_irq(adapter);
- /* Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant. */
- e1000_release_hw_control(adapter);
-
pci_disable_device(pdev);
return 0;
netif_device_attach(netdev);
- /* If the controller is 82573 and f/w is AMT, do not set
- * DRV_LOAD until the interface is up. For all other cases,
- * let the f/w know that the h/w is now under the control
- * of the driver. */
- if (hw->mac_type != e1000_82573 ||
- !e1000_check_mng_mode(hw))
- e1000_get_hw_control(adapter);
-
return 0;
}
#endif
/**
* e1000_io_error_detected - called when PCI error is detected
* @pdev: Pointer to PCI device
- * @state: The current pci conneection state
+ * @state: The current pci connection state
*
* This function is called after a PCI bus error affecting
* this device has been detected.
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
e1000_init_manageability(adapter);
}
netif_device_attach(netdev);
-
- /* If the controller is 82573 and f/w is AMT, do not set
- * DRV_LOAD until the interface is up. For all other cases,
- * let the f/w know that the h/w is now under the control
- * of the driver. */
- if (hw->mac_type != e1000_82573 ||
- !e1000_check_mng_mode(hw))
- e1000_get_hw_control(adapter);
-
}
/* e1000_main.c */
adapter->smart_power_down = opt.def;
}
}
- { /* Kumeran Lock Loss Workaround */
- opt = (struct e1000_option) {
- .type = enable_option,
- .name = "Kumeran Lock Loss Workaround",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (num_KumeranLockLoss > bd) {
- unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
- e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
- adapter->hw.kmrn_lock_loss_workaround_disabled = !kmrn_lock_loss;
- } else {
- adapter->hw.kmrn_lock_loss_workaround_disabled = !opt.def;
- }
- }
switch (adapter->hw.media_type) {
case e1000_media_type_fiber:
.p = dplx_list }}
};
- if (e1000_check_phy_reset_block(&adapter->hw)) {
- DPRINTK(PROBE, INFO,
- "Link active due to SoL/IDER Session. "
- "Speed/Duplex/AutoNeg parameter ignored.\n");
- return;
- }
if (num_Duplex > bd) {
dplx = Duplex[bd];
e1000_validate_option(&dplx, &opt, adapter);
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
.pba = 20,
- .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .max_hw_frame_size = DEFAULT_JUMBO,
.get_variants = e1000_get_variants_82571,
.mac_ops = &e82571_mac_ops,
.phy_ops = &e82_phy_ops_bm,
| FLAG_HAS_AMT
| FLAG_HAS_CTRLEXT_ON_LOAD,
.pba = 20,
- .max_hw_frame_size = DEFAULT_JUMBO,
+ .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
.get_variants = e1000_get_variants_82571,
.mac_ops = &e82571_mac_ops,
.phy_ops = &e82_phy_ops_bm,
/* Extended Device Control */
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
/* Extended Configuration Control and Size */
#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16
#define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */
#define HV_TNCRS_LOWER PHY_REG(778, 30)
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS 17
+#define BM_CS_STATUS_LINK_UP 0x0400
+#define BM_CS_STATUS_RESOLVED 0x0800
+#define BM_CS_STATUS_SPEED_MASK 0xC000
+#define BM_CS_STATUS_SPEED_1000 0x8000
+
+/* 82577 Mobile Phy Status Register */
+#define HV_M_STATUS 26
+#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000
+#define HV_M_STATUS_SPEED_MASK 0x0300
+#define HV_M_STATUS_SPEED_1000 0x0200
+#define HV_M_STATUS_LINK_UP 0x0040
+
enum e1000_boards {
board_82571,
board_82572,
extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
extern s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow);
extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
s32 (*get_cable_length)(struct e1000_hw *);
s32 (*get_phy_info)(struct e1000_hw *);
s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *);
+ s32 (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *);
void (*release_phy)(struct e1000_hw *);
s32 (*reset_phy)(struct e1000_hw *);
s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
s32 (*write_phy_reg)(struct e1000_hw *, u32, u16);
+ s32 (*write_phy_reg_locked)(struct e1000_hw *, u32, u16);
s32 (*cfg_on_link_up)(struct e1000_hw *);
};
struct e1000_dev_spec_ich8lan {
bool kmrn_lock_loss_workaround_enabled;
struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
+ bool nvm_k1_enabled;
};
struct e1000_hw {
#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
+#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR PHY_REG(768, 26)
+#define HV_SMB_ADDR_PEC_EN 0x0200
+#define HV_SMB_ADDR_VALID 0x0080
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP 0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
+
/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
/* Offset 04h HSFSTS */
union ich8_hws_flash_status {
static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
{
phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan;
phy->ops.read_phy_reg = e1000_read_phy_reg_hv;
+ phy->ops.read_phy_reg_locked = e1000_read_phy_reg_hv_locked;
+ phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
+ phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
phy->ops.write_phy_reg = e1000_write_phy_reg_hv;
+ phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
phy->id = e1000_phy_unknown;
case IGP03E1000_E_PHY_ID:
phy->type = e1000_phy_igp_3;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked;
+ phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked;
break;
case IFE_E_PHY_ID:
case IFE_PLUS_E_PHY_ID:
goto out;
}
- if (hw->mac.type == e1000_pchlan) {
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- E1000_KMRNCTRLSTA_K1_ENABLE);
- if (ret_val)
- goto out;
- }
-
/*
* First we want to see if the MII Status Register reports
* link. If so, then we want to get the current speed/duplex
if (ret_val)
goto out;
+ if (hw->mac.type == e1000_pchlan) {
+ ret_val = e1000_k1_gig_workaround_hv(hw, link);
+ if (ret_val)
+ goto out;
+ }
+
if (!link)
goto out; /* No link detected */
static DEFINE_MUTEX(nvm_mutex);
+/**
+ * e1000_acquire_nvm_ich8lan - Acquire NVM mutex
+ * @hw: pointer to the HW structure
+ *
+ * Acquires the mutex for performing NVM operations.
+ **/
+static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw)
+{
+ mutex_lock(&nvm_mutex);
+
+ return 0;
+}
+
+/**
+ * e1000_release_nvm_ich8lan - Release NVM mutex
+ * @hw: pointer to the HW structure
+ *
+ * Releases the mutex used while performing NVM operations.
+ **/
+static void e1000_release_nvm_ich8lan(struct e1000_hw *hw)
+{
+ mutex_unlock(&nvm_mutex);
+
+ return;
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
/**
* e1000_acquire_swflag_ich8lan - Acquire software control flag
* @hw: pointer to the HW structure
*
- * Acquires the software control flag for performing NVM and PHY
- * operations. This is a function pointer entry point only called by
- * read/write routines for the PHY and NVM parts.
+ * Acquires the software control flag for performing PHY and select
+ * MAC CSR accesses.
**/
static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
{
might_sleep();
- mutex_lock(&nvm_mutex);
+ mutex_lock(&swflag_mutex);
while (timeout) {
extcnf_ctrl = er32(EXTCNF_CTRL);
goto out;
}
- timeout = PHY_CFG_TIMEOUT * 2;
+ timeout = SW_FLAG_TIMEOUT;
extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
out:
if (ret_val)
- mutex_unlock(&nvm_mutex);
+ mutex_unlock(&swflag_mutex);
return ret_val;
}
* e1000_release_swflag_ich8lan - Release software control flag
* @hw: pointer to the HW structure
*
- * Releases the software control flag for performing NVM and PHY operations.
- * This is a function pointer entry point only called by read/write
- * routines for the PHY and NVM parts.
+ * Releases the software control flag for performing PHY and select
+ * MAC CSR accesses.
**/
static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
{
extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
ew32(EXTCNF_CTRL, extcnf_ctrl);
- mutex_unlock(&nvm_mutex);
+ mutex_unlock(&swflag_mutex);
+
+ return;
}
/**
return 0;
}
+/**
+ * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
+ * @hw: pointer to the HW structure
+ *
+ * SW should configure the LCD from the NVM extended configuration region
+ * as a workaround for certain parts.
+ **/
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
+ s32 ret_val;
+ u16 word_addr, reg_data, reg_addr, phy_page = 0;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Initialize the PHY from the NVM on ICH platforms. This
+ * is needed due to an issue where the NVM configuration is
+ * not properly autoloaded after power transitions.
+ * Therefore, after each PHY reset, we will load the
+ * configuration data out of the NVM manually.
+ */
+ if ((hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) ||
+ (hw->mac.type == e1000_pchlan)) {
+ struct e1000_adapter *adapter = hw->adapter;
+
+ /* Check if SW needs to configure the PHY */
+ if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
+ (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M) ||
+ (hw->mac.type == e1000_pchlan))
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+ else
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+
+ data = er32(FEXTNVM);
+ if (!(data & sw_cfg_mask))
+ goto out;
+
+ /* Wait for basic configuration completes before proceeding */
+ e1000_lan_init_done_ich8lan(hw);
+
+ /*
+ * Make sure HW does not configure LCD from PHY
+ * extended configuration before SW configuration
+ */
+ data = er32(EXTCNF_CTRL);
+ if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+ goto out;
+
+ cnf_size = er32(EXTCNF_SIZE);
+ cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+ cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+ if (!cnf_size)
+ goto out;
+
+ cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+ cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
+ if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
+ (hw->mac.type == e1000_pchlan)) {
+ /*
+ * HW configures the SMBus address and LEDs when the
+ * OEM and LCD Write Enable bits are set in the NVM.
+ * When both NVM bits are cleared, SW will configure
+ * them instead.
+ */
+ data = er32(STRAP);
+ data &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+ reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT;
+ reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR,
+ reg_data);
+ if (ret_val)
+ goto out;
+
+ data = er32(LEDCTL);
+ ret_val = e1000_write_phy_reg_hv_locked(hw,
+ HV_LED_CONFIG,
+ (u16)data);
+ if (ret_val)
+ goto out;
+ }
+ /* Configure LCD from extended configuration region. */
+
+ /* cnf_base_addr is in DWORD */
+ word_addr = (u16)(cnf_base_addr << 1);
+
+ for (i = 0; i < cnf_size; i++) {
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
+ ®_data);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
+ 1, ®_addr);
+ if (ret_val)
+ goto out;
+
+ /* Save off the PHY page for future writes. */
+ if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
+ phy_page = reg_data;
+ continue;
+ }
+
+ reg_addr &= PHY_REG_MASK;
+ reg_addr |= phy_page;
+
+ ret_val = phy->ops.write_phy_reg_locked(hw,
+ (u32)reg_addr,
+ reg_data);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+out:
+ hw->phy.ops.release_phy(hw);
+ return ret_val;
+}
+
+/**
+ * e1000_k1_gig_workaround_hv - K1 Si workaround
+ * @hw: pointer to the HW structure
+ * @link: link up bool flag
+ *
+ * If K1 is enabled for 1Gbps, the MAC might stall when transitioning
+ * from a lower speed. This workaround disables K1 whenever link is at 1Gig
+ * If link is down, the function will restore the default K1 setting located
+ * in the NVM.
+ **/
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
+{
+ s32 ret_val = 0;
+ u16 status_reg = 0;
+ bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
+
+ if (hw->mac.type != e1000_pchlan)
+ goto out;
+
+ /* Wrap the whole flow with the sw flag */
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+
+ /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
+ if (link) {
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = hw->phy.ops.read_phy_reg_locked(hw,
+ BM_CS_STATUS,
+ &status_reg);
+ if (ret_val)
+ goto release;
+
+ status_reg &= BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
+
+ if (status_reg == (BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
+ k1_enable = false;
+ }
+
+ if (hw->phy.type == e1000_phy_82577) {
+ ret_val = hw->phy.ops.read_phy_reg_locked(hw,
+ HV_M_STATUS,
+ &status_reg);
+ if (ret_val)
+ goto release;
+
+ status_reg &= HV_M_STATUS_LINK_UP |
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_MASK;
+
+ if (status_reg == (HV_M_STATUS_LINK_UP |
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_1000))
+ k1_enable = false;
+ }
+
+ /* Link stall fix for link up */
+ ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+ 0x0100);
+ if (ret_val)
+ goto release;
+
+ } else {
+ /* Link stall fix for link down */
+ ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19),
+ 0x4100);
+ if (ret_val)
+ goto release;
+ }
+
+ ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
+
+release:
+ hw->phy.ops.release_phy(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_configure_k1_ich8lan - Configure K1 power state
+ * @hw: pointer to the HW structure
+ * @enable: K1 state to configure
+ *
+ * Configure the K1 power state based on the provided parameter.
+ * Assumes semaphore already acquired.
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ **/
+static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+{
+ s32 ret_val = 0;
+ u32 ctrl_reg = 0;
+ u32 ctrl_ext = 0;
+ u32 reg = 0;
+ u16 kmrn_reg = 0;
+
+ ret_val = e1000e_read_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
+ if (ret_val)
+ goto out;
+
+ if (k1_enable)
+ kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
+ else
+ kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
+
+ ret_val = e1000e_write_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
+ if (ret_val)
+ goto out;
+
+ udelay(20);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_reg = er32(CTRL);
+
+ reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ reg |= E1000_CTRL_FRCSPD;
+ ew32(CTRL, reg);
+
+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
+ udelay(20);
+ ew32(CTRL, ctrl_reg);
+ ew32(CTRL_EXT, ctrl_ext);
+ udelay(20);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
+ * @hw: pointer to the HW structure
+ * @d0_state: boolean if entering d0 or d3 device state
+ *
+ * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
+ * collectively called OEM bits. The OEM Write Enable bit and SW Config bit
+ * in NVM determines whether HW should configure LPLU and Gbe Disable.
+ **/
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
+{
+ s32 ret_val = 0;
+ u32 mac_reg;
+ u16 oem_reg;
+
+ if (hw->mac.type != e1000_pchlan)
+ return ret_val;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
+ mac_reg = er32(EXTCNF_CTRL);
+ if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+ goto out;
+
+ mac_reg = er32(FEXTNVM);
+ if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
+ goto out;
+
+ mac_reg = er32(PHY_CTRL);
+
+ ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg);
+ if (ret_val)
+ goto out;
+
+ oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
+
+ if (d0_state) {
+ if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
+ oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+ if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ } else {
+ if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE)
+ oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+ if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ }
+ /* Restart auto-neg to activate the bits */
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
+ ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg);
+
+out:
+ hw->phy.ops.release_phy(hw);
+
+ return ret_val;
+}
+
+
/**
* e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
* done after every PHY reset.
ret_val = hw->phy.ops.acquire_phy(hw);
if (ret_val)
return ret_val;
+
hw->phy.addr = 1;
- e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+ ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+ if (ret_val)
+ goto out;
hw->phy.ops.release_phy(hw);
+ /*
+ * Configure the K1 Si workaround during phy reset assuming there is
+ * link so that it disables K1 if link is in 1Gbps.
+ */
+ ret_val = e1000_k1_gig_workaround_hv(hw, true);
+
+out:
return ret_val;
}
**/
static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i;
- u32 data, cnf_size, cnf_base_addr, sw_cfg_mask;
- s32 ret_val;
- u16 word_addr, reg_data, reg_addr, phy_page = 0;
+ s32 ret_val = 0;
+ u16 reg;
ret_val = e1000e_phy_hw_reset_generic(hw);
if (ret_val)
return ret_val;
}
- /*
- * Initialize the PHY from the NVM on ICH platforms. This
- * is needed due to an issue where the NVM configuration is
- * not properly autoloaded after power transitions.
- * Therefore, after each PHY reset, we will load the
- * configuration data out of the NVM manually.
- */
- if (hw->mac.type == e1000_ich8lan && phy->type == e1000_phy_igp_3) {
- struct e1000_adapter *adapter = hw->adapter;
-
- /* Check if SW needs configure the PHY */
- if ((adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M_AMT) ||
- (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_M))
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
- else
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
-
- data = er32(FEXTNVM);
- if (!(data & sw_cfg_mask))
- return 0;
-
- /* Wait for basic configuration completes before proceeding */
- e1000_lan_init_done_ich8lan(hw);
-
- /*
- * Make sure HW does not configure LCD from PHY
- * extended configuration before SW configuration
- */
- data = er32(EXTCNF_CTRL);
- if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
- return 0;
-
- cnf_size = er32(EXTCNF_SIZE);
- cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
- cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
- if (!cnf_size)
- return 0;
-
- cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
- cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
-
- /* Configure LCD from extended configuration region. */
-
- /* cnf_base_addr is in DWORD */
- word_addr = (u16)(cnf_base_addr << 1);
-
- for (i = 0; i < cnf_size; i++) {
- ret_val = e1000_read_nvm(hw,
- (word_addr + i * 2),
- 1,
- ®_data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_nvm(hw,
- (word_addr + i * 2 + 1),
- 1,
- ®_addr);
- if (ret_val)
- return ret_val;
-
- /* Save off the PHY page for future writes. */
- if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
- phy_page = reg_data;
- continue;
- }
+ /* Dummy read to clear the phy wakeup bit after lcd reset */
+ if (hw->mac.type == e1000_pchlan)
+ e1e_rphy(hw, BM_WUC, ®);
- reg_addr |= phy_page;
+ /* Configure the LCD with the extended configuration region in NVM */
+ ret_val = e1000_sw_lcd_config_ich8lan(hw);
+ if (ret_val)
+ goto out;
- ret_val = e1e_wphy(hw, (u32)reg_addr, reg_data);
- if (ret_val)
- return ret_val;
- }
- }
+ /* Configure the LCD with the OEM bits in NVM */
+ if (hw->mac.type == e1000_pchlan)
+ ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+out:
return 0;
}
return ret_val;
}
+/**
+ * e1000_set_lplu_state_pchlan - Set Low Power Link Up state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU state according to the active flag. For PCH, if OEM write
+ * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set
+ * the phy speed. This function will manually set the LPLU bit and restart
+ * auto-neg as hw would do. D3 and D0 LPLU will call the same function
+ * since it configures the same bit.
+ **/
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
+{
+ s32 ret_val = 0;
+ u16 oem_reg;
+
+ ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
+ if (ret_val)
+ goto out;
+
+ if (active)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ else
+ oem_reg &= ~HV_OEM_BITS_LPLU;
+
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
+ ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg);
+
+out:
+ return ret_val;
+}
+
/**
* e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
* @hw: pointer to the HW structure
if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
(words == 0)) {
hw_dbg(hw, "nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
+ ret_val = -E1000_ERR_NVM;
+ goto out;
}
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- if (ret_val)
- goto out;
+ nvm->ops.acquire_nvm(hw);
ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
if (ret_val) {
}
}
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
out:
if (ret_val)
return -E1000_ERR_NVM;
}
+ nvm->ops.acquire_nvm(hw);
+
for (i = 0; i < words; i++) {
dev_spec->shadow_ram[offset+i].modified = 1;
dev_spec->shadow_ram[offset+i].value = data[i];
}
+ nvm->ops.release_nvm(hw);
+
return 0;
}
if (nvm->type != e1000_nvm_flash_sw)
goto out;
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- if (ret_val)
- goto out;
+ nvm->ops.acquire_nvm(hw);
/*
* We're writing to the opposite bank so if we're on bank 1,
old_bank_offset = 0;
ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
} else {
new_bank_offset = 0;
ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
}
if (ret_val) {
/* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
hw_dbg(hw, "Flash commit failed.\n");
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
data &= 0xBFFF;
act_offset * 2 + 1,
(u8)(data >> 8));
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
if (ret_val) {
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
goto out;
}
dev_spec->shadow_ram[i].value = 0xFFFF;
}
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
/*
* Reload the EEPROM, or else modifications will not appear
**/
void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
{
+ struct e1000_nvm_info *nvm = &hw->nvm;
union ich8_flash_protected_range pr0;
union ich8_hws_flash_status hsfsts;
u32 gfpreg;
- s32 ret_val;
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- if (ret_val)
- return;
+ nvm->ops.acquire_nvm(hw);
gfpreg = er32flash(ICH_FLASH_GFPREG);
hsfsts.hsf_status.flockdn = true;
ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
- e1000_release_swflag_ich8lan(hw);
+ nvm->ops.release_nvm(hw);
}
/**
**/
static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
{
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ u16 reg;
u32 ctrl, icr, kab;
s32 ret_val;
ew32(PBS, E1000_PBS_16K);
}
+ if (hw->mac.type == e1000_pchlan) {
+ /* Save the NVM K1 bit setting*/
+ ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®);
+ if (ret_val)
+ return ret_val;
+
+ if (reg & E1000_NVM_K1_ENABLE)
+ dev_spec->nvm_k1_enabled = true;
+ else
+ dev_spec->nvm_k1_enabled = false;
+ }
+
ctrl = er32(CTRL);
if (!e1000_check_reset_block(hw)) {
hw_dbg(hw, "Auto Read Done did not complete\n");
}
}
+ /* Dummy read to clear the phy wakeup bit after lcd reset */
+ if (hw->mac.type == e1000_pchlan)
+ e1e_rphy(hw, BM_WUC, ®);
+ ret_val = e1000_sw_lcd_config_ich8lan(hw);
+ if (ret_val)
+ goto out;
+
+ if (hw->mac.type == e1000_pchlan) {
+ ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+ if (ret_val)
+ goto out;
+ }
/*
* For PCH, this write will make sure that any noise
* will be detected as a CRC error and be dropped rather than show up
if (hw->mac.type == e1000_pchlan)
ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+out:
return ret_val;
}
if (ret_val)
return ret_val;
- if ((hw->mac.type == e1000_pchlan) && (*speed == SPEED_1000)) {
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- E1000_KMRNCTRLSTA_K1_DISABLE);
- if (ret_val)
- return ret_val;
- }
-
if ((hw->mac.type == e1000_ich8lan) &&
(hw->phy.type == e1000_phy_igp_3) &&
(*speed == SPEED_1000)) {
E1000_PHY_CTRL_GBE_DISABLE;
ew32(PHY_CTRL, phy_ctrl);
- /* Workaround SWFLAG unexpectedly set during S0->Sx */
if (hw->mac.type == e1000_pchlan)
- udelay(500);
+ e1000_phy_hw_reset_ich8lan(hw);
default:
break;
}
};
static struct e1000_nvm_operations ich8_nvm_ops = {
- .acquire_nvm = e1000_acquire_swflag_ich8lan,
+ .acquire_nvm = e1000_acquire_nvm_ich8lan,
.read_nvm = e1000_read_nvm_ich8lan,
- .release_nvm = e1000_release_swflag_ich8lan,
+ .release_nvm = e1000_release_nvm_ich8lan,
.update_nvm = e1000_update_nvm_checksum_ich8lan,
.valid_led_default = e1000_valid_led_default_ich8lan,
.validate_nvm = e1000_validate_nvm_checksum_ich8lan,
goto err_pci_reg;
/* AER (Advanced Error Reporting) hooks */
- err = pci_enable_pcie_error_reporting(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
- "0x%x\n", err);
- /* non-fatal, continue */
- }
+ pci_enable_pcie_error_reporting(pdev);
pci_set_master(pdev);
/* PCI config space info */
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
- int err;
/*
* flush_scheduled work may reschedule our watchdog task, so
free_netdev(netdev);
/* AER disable */
- err = pci_disable_pcie_error_reporting(pdev);
- if (err)
- dev_err(&pdev->dev,
- "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+ pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
}
/* BM PHY Copper Specific Control 1 */
#define BM_CS_CTRL1 16
-/* BM PHY Copper Specific Status */
-#define BM_CS_STATUS 17
-#define BM_CS_STATUS_LINK_UP 0x0400
-#define BM_CS_STATUS_RESOLVED 0x0800
-#define BM_CS_STATUS_SPEED_MASK 0xC000
-#define BM_CS_STATUS_SPEED_1000 0x8000
-
#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
* MDIC mode. No harm in trying again in this case since
* the PHY ID is unknown at this point anyway
*/
+ ret_val = phy->ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
ret_val = e1000_set_mdio_slow_mode_hv(hw, true);
if (ret_val)
goto out;
+ phy->ops.release_phy(hw);
retry_count++;
}
out:
/* Revert to MDIO fast mode, if applicable */
- if (retry_count)
+ if (retry_count) {
+ ret_val = phy->ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ phy->ops.release_phy(hw);
+ }
return ret_val;
}
}
/**
- * e1000e_read_phy_reg_igp - Read igp PHY register
+ * __e1000e_read_phy_reg_igp - Read igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
+ * and stores the retrieved information in data. Release any acquired
* semaphores before exiting.
**/
-s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto release;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
- hw->phy.ops.release_phy(hw);
+ data);
+release:
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+out:
return ret_val;
}
+/**
+ * e1000e_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset and stores the
+ * retrieved information in data.
+ * Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000e_read_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ * e1000e_read_phy_reg_igp_locked - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000e_read_phy_reg_igp(hw, offset, data, true);
+}
+
/**
* e1000e_write_phy_reg_igp - Write igp PHY register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
{
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto release;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
+release:
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+out:
return ret_val;
}
/**
- * e1000e_read_kmrn_reg - Read kumeran register
+ * e1000e_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000e_write_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ * e1000e_write_phy_reg_igp_locked - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000e_write_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ * __e1000_read_kmrn_reg - Read kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary. Then reads the PHY register at offset
* using the kumeran interface. The information retrieved is stored in data.
* Release any acquired semaphores before exiting.
**/
-s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
u32 kmrnctrlsta;
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
kmrnctrlsta = er32(KMRNCTRLSTA);
*data = (u16)kmrnctrlsta;
- hw->phy.ops.release_phy(hw);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+out:
return ret_val;
}
/**
- * e1000e_write_kmrn_reg - Write kumeran register
+ * e1000e_read_kmrn_reg - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset using the
+ * kumeran interface. The information retrieved is stored in data.
+ * Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ * e1000e_read_kmrn_reg_locked - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the kumeran interface. The
+ * information retrieved is stored in data.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ * __e1000_write_kmrn_reg - Write kumeran register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary. Then write the data to PHY register
* at the offset using the kumeran interface. Release any acquired semaphores
* before exiting.
**/
-s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
{
u32 kmrnctrlsta;
- s32 ret_val;
+ s32 ret_val = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
+ if (!locked) {
+ if (!(hw->phy.ops.acquire_phy))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ goto out;
+ }
kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
E1000_KMRNCTRLSTA_OFFSET) | data;
ew32(KMRNCTRLSTA, kmrnctrlsta);
udelay(2);
- hw->phy.ops.release_phy(hw);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
+out:
return ret_val;
}
+/**
+ * e1000e_write_kmrn_reg - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to the PHY register at the offset
+ * using the kumeran interface. Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ * e1000e_write_kmrn_reg_locked - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Write the data to PHY register at the offset using the kumeran interface.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_kmrn_reg(hw, offset, data, true);
+}
+
/**
* e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
* @hw: pointer to the HW structure
u32 page = offset >> IGP_PAGE_SHIFT;
u32 page_shift = 0;
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
if (offset > MAX_PHY_MULTI_PAGE_REG) {
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
(page << page_shift));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
+ if (ret_val)
goto out;
- }
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
-
out:
+ hw->phy.ops.release_phy(hw);
return ret_val;
}
u32 page = offset >> IGP_PAGE_SHIFT;
u32 page_shift = 0;
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
if (offset > MAX_PHY_MULTI_PAGE_REG) {
/* Page is shifted left, PHY expects (page x 32) */
ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
(page << page_shift));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
+ if (ret_val)
goto out;
- }
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
- hw->phy.ops.release_phy(hw);
-
out:
+ hw->phy.ops.release_phy(hw);
return ret_val;
}
s32 ret_val;
u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
true);
- return ret_val;
+ goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
hw->phy.addr = 1;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
page);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
+out:
hw->phy.ops.release_phy(hw);
-
return ret_val;
}
s32 ret_val;
u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+
/* Page 800 works differently than the rest so it has its own func */
if (page == BM_WUC_PAGE) {
ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
false);
- return ret_val;
+ goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
hw->phy.addr = 1;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
page);
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
+out:
hw->phy.ops.release_phy(hw);
-
return ret_val;
}
* 3) Write the address using the address opcode (0x11)
* 4) Read or write the data using the data opcode (0x12)
* 5) Restore 769_17.2 to its original value
+ *
+ * Assumes semaphore already acquired.
**/
static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
u16 *data, bool read)
s32 ret_val;
u16 reg = BM_PHY_REG_NUM(offset);
u16 phy_reg = 0;
- u8 phy_acquired = 1;
-
/* Gig must be disabled for MDIO accesses to page 800 */
if ((hw->mac.type == e1000_pchlan) &&
(!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
hw_dbg(hw, "Attempting to access page 800 while gig enabled\n");
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val) {
- phy_acquired = 0;
- goto out;
- }
-
/* All operations in this function are phy address 1 */
hw->phy.addr = 1;
ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
out:
- if (phy_acquired == 1)
- hw->phy.ops.release_phy(hw);
return ret_val;
}
return 0;
}
+/**
+ * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ * @hw: pointer to the HW structure
+ * @slow: true for slow mode, false for normal mode
+ *
+ * Assumes semaphore already acquired.
+ **/
s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw, bool slow)
{
s32 ret_val = 0;
u16 data = 0;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- return ret_val;
-
/* Set MDIO mode - page 769, register 16: 0x2580==slow, 0x2180==fast */
hw->phy.addr = 1;
ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
(BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- return ret_val;
- }
+ if (ret_val)
+ goto out;
+
ret_val = e1000e_write_phy_reg_mdic(hw, BM_CS_CTRL1,
(0x2180 | (slow << 10)));
+ if (ret_val)
+ goto out;
/* dummy read when reverting to fast mode - throw away result */
if (!slow)
- e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
-
- hw->phy.ops.release_phy(hw);
+ ret_val = e1000e_read_phy_reg_mdic(hw, BM_CS_CTRL1, &data);
+out:
return ret_val;
}
/**
- * e1000_read_phy_reg_hv - Read HV PHY register
+ * __e1000_read_phy_reg_hv - Read HV PHY register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
+ * and stores the retrieved information in data. Release any acquired
* semaphore before exiting.
**/
-s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
bool in_slow_mode = false;
+ if (!locked) {
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Workaround failure in MDIO access while cable is disconnected */
if ((hw->phy.type == e1000_phy_82577) &&
!(er32(STATUS) & E1000_STATUS_LU)) {
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
if (page == HV_INTC_FC_PAGE_START)
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(page << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- goto out;
- }
hw->phy.addr = phy_addr;
}
}
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
- hw->phy.ops.release_phy(hw);
-
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
return ret_val;
}
/**
- * e1000_write_phy_reg_hv - Write HV PHY register
+ * e1000_read_phy_reg_hv - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset and stores
+ * the retrieved information in data. Release the acquired semaphore
+ * before exiting.
+ **/
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, false);
+}
+
+/**
+ * e1000_read_phy_reg_hv_locked - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired.
+ **/
+s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, true);
+}
+
+/**
+ * __e1000_write_phy_reg_hv - Write HV PHY register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
*
* Acquires semaphore, if necessary, then writes the data to PHY register
* at the offset. Release any acquired semaphores before exiting.
**/
-s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
{
s32 ret_val;
u16 page = BM_PHY_REG_PAGE(offset);
u16 reg = BM_PHY_REG_NUM(offset);
bool in_slow_mode = false;
+ if (!locked) {
+ ret_val = hw->phy.ops.acquire_phy(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Workaround failure in MDIO access while cable is disconnected */
if ((hw->phy.type == e1000_phy_82577) &&
!(er32(STATUS) & E1000_STATUS_LU)) {
goto out;
}
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
-
hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
if (page == HV_INTC_FC_PAGE_START)
((MAX_PHY_REG_ADDRESS & reg) == 0) &&
(data & (1 << 11))) {
u16 data2 = 0x7EFF;
- hw->phy.ops.release_phy(hw);
ret_val = e1000_access_phy_debug_regs_hv(hw, (1 << 6) | 0x3,
&data2, false);
if (ret_val)
goto out;
-
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val)
- goto out;
}
if (reg > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(page << IGP_PAGE_SHIFT));
- if (ret_val) {
- hw->phy.ops.release_phy(hw);
- goto out;
- }
hw->phy.addr = phy_addr;
}
}
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
data);
- hw->phy.ops.release_phy(hw);
out:
/* Revert to MDIO fast mode, if applicable */
if ((hw->phy.type == e1000_phy_82577) && in_slow_mode)
ret_val = e1000_set_mdio_slow_mode_hv(hw, false);
+ if (!locked)
+ hw->phy.ops.release_phy(hw);
+
return ret_val;
}
+/**
+ * e1000_write_phy_reg_hv - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to PHY register at the offset.
+ * Release the acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, false);
+}
+
+/**
+ * e1000_write_phy_reg_hv_locked - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset. Assumes semaphore
+ * already acquired.
+ **/
+s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, true);
+}
+
/**
* e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
* @page: page to be accessed
* @data: pointer to the data to be read or written
* @read: determines if operation is read or written
*
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retreived information in data. Release any acquired
- * semaphores before exiting. Note that the procedure to read these regs
- * uses the address port and data port to read/write.
+ * Reads the PHY register at offset and stores the retreived information
+ * in data. Assumes semaphore already acquired. Note that the procedure
+ * to read these regs uses the address port and data port to read/write.
**/
static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
u16 *data, bool read)
s32 ret_val;
u32 addr_reg = 0;
u32 data_reg = 0;
- u8 phy_acquired = 1;
/* This takes care of the difference with desktop vs mobile phy */
addr_reg = (hw->phy.type == e1000_phy_82578) ?
I82578_ADDR_REG : I82577_ADDR_REG;
data_reg = addr_reg + 1;
- ret_val = hw->phy.ops.acquire_phy(hw);
- if (ret_val) {
- hw_dbg(hw, "Could not acquire PHY\n");
- phy_acquired = 0;
- goto out;
- }
-
/* All operations in this function are phy address 2 */
hw->phy.addr = 2;
}
out:
- if (phy_acquired == 1)
- hw->phy.ops.release_phy(hw);
return ret_val;
}
.ndo_poll_controller = ehea_netpoll,
#endif
.ndo_get_stats = ehea_get_stats,
- .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = ehea_set_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = ehea_set_multicast_list,
* Sorry, I had to rewrite most of this for 2.5.x -DaveM
*/
+#include <linux/capability.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
+#include <linux/sched.h>
#include <net/ethoc.h>
+static int buffer_size = 0x8000; /* 32 KBytes */
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size");
+
/* register offsets */
#define MODER 0x00
#define INT_SOURCE 0x04
* struct ethoc - driver-private device structure
* @iobase: pointer to I/O memory region
* @membase: pointer to buffer memory region
+ * @dma_alloc: dma allocated buffer size
* @num_tx: number of send buffers
* @cur_tx: last send buffer written
* @dty_tx: last buffer actually sent
struct ethoc {
void __iomem *iobase;
void __iomem *membase;
+ int dma_alloc;
unsigned int num_tx;
unsigned int cur_tx;
u32 addr;
};
-static u32 ethoc_read(struct ethoc *dev, loff_t offset)
+static inline u32 ethoc_read(struct ethoc *dev, loff_t offset)
{
return ioread32(dev->iobase + offset);
}
-static void ethoc_write(struct ethoc *dev, loff_t offset, u32 data)
+static inline void ethoc_write(struct ethoc *dev, loff_t offset, u32 data)
{
iowrite32(data, dev->iobase + offset);
}
-static void ethoc_read_bd(struct ethoc *dev, int index, struct ethoc_bd *bd)
+static inline void ethoc_read_bd(struct ethoc *dev, int index,
+ struct ethoc_bd *bd)
{
loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd));
bd->stat = ethoc_read(dev, offset + 0);
bd->addr = ethoc_read(dev, offset + 4);
}
-static void ethoc_write_bd(struct ethoc *dev, int index,
+static inline void ethoc_write_bd(struct ethoc *dev, int index,
const struct ethoc_bd *bd)
{
loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd));
ethoc_write(dev, offset + 4, bd->addr);
}
-static void ethoc_enable_irq(struct ethoc *dev, u32 mask)
+static inline void ethoc_enable_irq(struct ethoc *dev, u32 mask)
{
u32 imask = ethoc_read(dev, INT_MASK);
imask |= mask;
ethoc_write(dev, INT_MASK, imask);
}
-static void ethoc_disable_irq(struct ethoc *dev, u32 mask)
+static inline void ethoc_disable_irq(struct ethoc *dev, u32 mask)
{
u32 imask = ethoc_read(dev, INT_MASK);
imask &= ~mask;
ethoc_write(dev, INT_MASK, imask);
}
-static void ethoc_ack_irq(struct ethoc *dev, u32 mask)
+static inline void ethoc_ack_irq(struct ethoc *dev, u32 mask)
{
ethoc_write(dev, INT_SOURCE, mask);
}
-static void ethoc_enable_rx_and_tx(struct ethoc *dev)
+static inline void ethoc_enable_rx_and_tx(struct ethoc *dev)
{
u32 mode = ethoc_read(dev, MODER);
mode |= MODER_RXEN | MODER_TXEN;
ethoc_write(dev, MODER, mode);
}
-static void ethoc_disable_rx_and_tx(struct ethoc *dev)
+static inline void ethoc_disable_rx_and_tx(struct ethoc *dev)
{
u32 mode = ethoc_read(dev, MODER);
mode &= ~(MODER_RXEN | MODER_TXEN);
dev->cur_rx = 0;
/* setup transmission buffers */
- bd.addr = 0;
+ bd.addr = virt_to_phys(dev->membase);
bd.stat = TX_BD_IRQ | TX_BD_CRC;
for (i = 0; i < dev->num_tx; i++) {
bd.addr += ETHOC_BUFSIZ;
}
- bd.addr = dev->num_tx * ETHOC_BUFSIZ;
bd.stat = RX_BD_EMPTY | RX_BD_IRQ;
for (i = 0; i < dev->num_rx; i++) {
if (ethoc_update_rx_stats(priv, &bd) == 0) {
int size = bd.stat >> 16;
struct sk_buff *skb = netdev_alloc_skb(dev, size);
+
+ size -= 4; /* strip the CRC */
+ skb_reserve(skb, 2); /* align TCP/IP header */
+
if (likely(skb)) {
- void *src = priv->membase + bd.addr;
+ void *src = phys_to_virt(bd.addr);
memcpy_fromio(skb_put(skb, size), src, size);
skb->protocol = eth_type_trans(skb, dev);
priv->stats.rx_packets++;
return IRQ_NONE;
}
- ethoc_ack_irq(priv, INT_MASK_ALL);
+ ethoc_ack_irq(priv, pending);
if (pending & INT_MASK_BUSY) {
dev_err(&dev->dev, "packet dropped\n");
if (ret)
return ret;
- /* calculate the number of TX/RX buffers */
- num_bd = (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ;
- priv->num_tx = min(min_tx, num_bd / 4);
+ /* calculate the number of TX/RX buffers, maximum 128 supported */
+ num_bd = min_t(unsigned int,
+ 128, (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ);
+ priv->num_tx = max(min_tx, num_bd / 4);
priv->num_rx = num_bd - priv->num_tx;
ethoc_write(priv, TX_BD_NUM, priv->num_tx);
else
bd.stat &= ~TX_BD_PAD;
- dest = priv->membase + bd.addr;
+ dest = phys_to_virt(bd.addr);
memcpy_toio(dest, skb->data, skb->len);
bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK);
/* obtain buffer memory space */
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res) {
- dev_err(&pdev->dev, "cannot obtain memory space\n");
- ret = -ENXIO;
- goto free;
- }
-
- mem = devm_request_mem_region(&pdev->dev, res->start,
+ if (res) {
+ mem = devm_request_mem_region(&pdev->dev, res->start,
res->end - res->start + 1, res->name);
- if (!mem) {
- dev_err(&pdev->dev, "cannot request memory space\n");
- ret = -ENXIO;
- goto free;
+ if (!mem) {
+ dev_err(&pdev->dev, "cannot request memory space\n");
+ ret = -ENXIO;
+ goto free;
+ }
+
+ netdev->mem_start = mem->start;
+ netdev->mem_end = mem->end;
}
- netdev->mem_start = mem->start;
- netdev->mem_end = mem->end;
/* obtain device IRQ number */
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
/* setup driver-private data */
priv = netdev_priv(netdev);
priv->netdev = netdev;
+ priv->dma_alloc = 0;
priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr,
mmio->end - mmio->start + 1);
goto error;
}
- priv->membase = devm_ioremap_nocache(&pdev->dev, netdev->mem_start,
- mem->end - mem->start + 1);
- if (!priv->membase) {
- dev_err(&pdev->dev, "cannot remap memory space\n");
- ret = -ENXIO;
- goto error;
+ if (netdev->mem_end) {
+ priv->membase = devm_ioremap_nocache(&pdev->dev,
+ netdev->mem_start, mem->end - mem->start + 1);
+ if (!priv->membase) {
+ dev_err(&pdev->dev, "cannot remap memory space\n");
+ ret = -ENXIO;
+ goto error;
+ }
+ } else {
+ /* Allocate buffer memory */
+ priv->membase = dma_alloc_coherent(NULL,
+ buffer_size, (void *)&netdev->mem_start,
+ GFP_KERNEL);
+ if (!priv->membase) {
+ dev_err(&pdev->dev, "cannot allocate %dB buffer\n",
+ buffer_size);
+ ret = -ENOMEM;
+ goto error;
+ }
+ netdev->mem_end = netdev->mem_start + buffer_size;
+ priv->dma_alloc = buffer_size;
}
/* Allow the platform setup code to pass in a MAC address. */
kfree(priv->mdio->irq);
mdiobus_free(priv->mdio);
free:
+ if (priv->dma_alloc)
+ dma_free_coherent(NULL, priv->dma_alloc, priv->membase,
+ netdev->mem_start);
free_netdev(netdev);
out:
return ret;
kfree(priv->mdio->irq);
mdiobus_free(priv->mdio);
}
-
+ if (priv->dma_alloc)
+ dma_free_coherent(NULL, priv->dma_alloc, priv->membase,
+ netdev->mem_start);
unregister_netdev(netdev);
free_netdev(netdev);
}
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
*
* index is only used in legacy code
*/
-int __init fec_enet_init(struct net_device *dev, int index)
+static int fec_enet_init(struct net_device *dev, int index)
{
struct fec_enet_private *fep = netdev_priv(dev);
struct bufdesc *cbd_base;
mpc52xx_fec_hw_init(dev);
- if (priv->phydev) {
- phy_stop(priv->phydev);
- phy_write(priv->phydev, MII_BMCR, BMCR_RESET);
- phy_start(priv->phydev);
- }
-
bcom_fec_rx_reset(priv->rx_dmatsk);
bcom_fec_tx_reset(priv->tx_dmatsk);
{ .compatible = "mpc5200b-fec-phy", },
{}
};
+MODULE_DEVICE_TABLE(of, mpc52xx_fec_mdio_match);
struct of_platform_driver mpc52xx_fec_mdio_driver = {
.name = "mpc5200b-fec-phy",
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/ethtool.h>
#include <linux/timer.h>
#endif
{}
};
+MODULE_DEVICE_TABLE(of, fs_enet_match);
static struct of_platform_driver fs_enet_driver = {
.name = "fs_enet",
},
{},
};
+MODULE_DEVICE_TABLE(of, fs_enet_mdio_bb_match);
static struct of_platform_driver fs_enet_bb_mdio_driver = {
.name = "fsl-bb-mdio",
#endif
{},
};
+MODULE_DEVICE_TABLE(of, fs_enet_mdio_fec_match);
static struct of_platform_driver fs_enet_fec_mdio_driver = {
.name = "fsl-fec-mdio",
},
{},
};
+MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match);
static struct of_platform_driver fsl_pq_mdio_driver = {
.name = "fsl-pq_mdio",
return IRQ_HANDLED;
}
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:fsl-gianfar");
-
static struct of_device_id gfar_match[] =
{
{
},
{},
};
+MODULE_DEVICE_TABLE(of, gfar_match);
/* Structure for a device driver */
static struct of_platform_driver gfar_driver = {
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (5*HZ)
+#include <linux/capability.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/workqueue.h>
#include <linux/fs.h>
/*****************************************************************************/
+#include <linux/capability.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/string.h>
/*****************************************************************************/
+#include <linux/capability.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/string.h>
/*****************************************************************************/
+#include <linux/capability.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/net.h>
}
if (ax->crcmode != CRC_MODE_SMACK && ax->crcauto) {
printk(KERN_INFO
- "mkiss: %s: Switchting to crc-smack\n",
+ "mkiss: %s: Switching to crc-smack\n",
ax->dev->name);
ax->crcmode = CRC_MODE_SMACK;
}
}
if (ax->crcmode != CRC_MODE_FLEX && ax->crcauto) {
printk(KERN_INFO
- "mkiss: %s: Switchting to crc-flexnet\n",
+ "mkiss: %s: Switching to crc-flexnet\n",
ax->dev->name);
ax->crcmode = CRC_MODE_FLEX;
}
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
*
*/
+#include <linux/module.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
ret |= EMAC_MR1_TFS_2K;
break;
default:
- printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
+ printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n",
dev->ndev->name, tx_size);
}
DBG2(dev, "__emac4_calc_base_mr1" NL);
switch(tx_size) {
+ case 16384:
+ ret |= EMAC4_MR1_TFS_16K;
+ break;
case 4096:
ret |= EMAC4_MR1_TFS_4K;
break;
ret |= EMAC4_MR1_TFS_2K;
break;
default:
- printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
+ printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n",
dev->ndev->name, tx_size);
}
},
{},
};
+MODULE_DEVICE_TABLE(of, emac_match);
static struct of_platform_driver emac_driver = {
.name = "emac",
#define EMAC4_MR1_RFS_16K 0x00280000
#define EMAC4_MR1_TFS_2K 0x00020000
#define EMAC4_MR1_TFS_4K 0x00030000
+#define EMAC4_MR1_TFS_16K 0x00050000
#define EMAC4_MR1_TR 0x00008000
#define EMAC4_MR1_MWSW_001 0x00001000
#define EMAC4_MR1_JPSM 0x00000800
stats->tx_packets++;
stats->tx_bytes +=skb->len;
- skb->dev = __dev_get_by_index(&init_net, skb->iif);
+ skb->dev = dev_get_by_index(&init_net, skb->iif);
if (!skb->dev) {
dev_kfree_skb(skb);
stats->tx_dropped++;
break;
}
+ dev_put(skb->dev);
skb->iif = _dev->ifindex;
if (from & AT_EGRESS) {
wrfl();
}
-/**
- * igb_update_mc_addr_list - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- *
- * Updates entire Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count)
-{
- u32 hash_value, hash_bit, hash_reg;
- int i;
-
- /* clear mta_shadow */
- memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
-
- /* update mta_shadow from mc_addr_list */
- for (i = 0; (u32) i < mc_addr_count; i++) {
- hash_value = igb_hash_mc_addr(hw, mc_addr_list);
-
- hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
- hash_bit = hash_value & 0x1F;
-
- hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
- mc_addr_list += (ETH_ALEN);
- }
-
- /* replace the entire MTA table */
- for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
- array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
- wrfl();
-}
-
/**
* igb_hash_mc_addr - Generate a multicast hash value
* @hw: pointer to the HW structure
* the multicast filter table array address and new table value. See
* igb_mta_set()
**/
-u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
{
u32 hash_value, hash_mask;
u8 bit_shift = 0;
return hash_value;
}
+/**
+ * igb_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ u32 hash_value, hash_bit, hash_reg;
+ int i;
+
+ /* clear mta_shadow */
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* update mta_shadow from mc_addr_list */
+ for (i = 0; (u32) i < mc_addr_count; i++) {
+ hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+ mc_addr_list += (ETH_ALEN);
+ }
+
+ /* replace the entire MTA table */
+ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+ array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
+ wrfl();
+}
+
/**
* igb_clear_hw_cntrs_base - Clear base hardware counters
* @hw: pointer to the HW structure
#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
-extern u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr);
#endif
#include <linux/interrupt.h>
#include <linux/if_ether.h>
#include <linux/ethtool.h>
+#include <linux/sched.h>
#include "igb.h"
{
struct igb_adapter *adapter = netdev_priv(netdev);
struct igb_ring *temp_ring;
- int i, err;
+ int i, err = 0;
u32 new_rx_count, new_tx_count;
if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
return 0;
}
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i].count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i].count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto clear_reset;
+ }
+
if (adapter->num_tx_queues > adapter->num_rx_queues)
temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring));
else
temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring));
- if (!temp_ring)
- return -ENOMEM;
- while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
- msleep(1);
+ if (!temp_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
- if (netif_running(adapter->netdev))
- igb_down(adapter);
+ igb_down(adapter);
/*
* We can't just free everything and then setup again,
adapter->rx_ring_count = new_rx_count;
}
-
- err = 0;
err_setup:
- if (netif_running(adapter->netdev))
- igb_up(adapter);
-
- clear_bit(__IGB_RESETTING, &adapter->state);
+ igb_up(adapter);
vfree(temp_ring);
+clear_reset:
+ clear_bit(__IGB_RESETTING, &adapter->state);
return err;
}
if (err)
goto err_pci_reg;
- err = pci_enable_pcie_error_reporting(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
- "0x%x\n", err);
- /* non-fatal, continue */
- }
+ pci_enable_pcie_error_reporting(pdev);
pci_set_master(pdev);
pci_save_state(pdev);
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- int err;
/* flush_scheduled work may reschedule our watchdog task, so
* explicitly disable watchdog tasks from being rescheduled */
free_netdev(netdev);
- err = pci_disable_pcie_error_reporting(pdev);
- if (err)
- dev_err(&pdev->dev,
- "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+ pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
}
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct igbvf_ring *temp_ring;
- int err;
+ int err = 0;
u32 new_rx_count, new_tx_count;
if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
return 0;
}
- temp_ring = vmalloc(sizeof(struct igbvf_ring));
- if (!temp_ring)
- return -ENOMEM;
-
while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
msleep(1);
- if (netif_running(adapter->netdev))
- igbvf_down(adapter);
+ if (!netif_running(adapter->netdev)) {
+ adapter->tx_ring->count = new_tx_count;
+ adapter->rx_ring->count = new_rx_count;
+ goto clear_reset;
+ }
+
+ temp_ring = vmalloc(sizeof(struct igbvf_ring));
+ if (!temp_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
+
+ igbvf_down(adapter);
/*
* We can't just free everything and then setup again,
memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring));
}
-
- err = 0;
err_setup:
- if (netif_running(adapter->netdev))
- igbvf_up(adapter);
-
- clear_bit(__IGBVF_RESETTING, &adapter->state);
+ igbvf_up(adapter);
vfree(temp_ring);
+clear_reset:
+ clear_bit(__IGBVF_RESETTING, &adapter->state);
return err;
}
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/device.h>
#include <linux/crc32.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/device.h>
#include <linux/crc32.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/device.h>
#include <linux/crc32.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
-#include <linux/kref.h>
#include <linux/usb.h>
#include <linux/device.h>
#include <linux/crc32.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/gpio.h>
#include <net/irda/irda.h>
#include <net/irda/irmod.h>
DCSR(si->txdma) |= DCSR_RUN;
}
+/*
+ * Set the IrDA communications mode.
+ */
+static void pxa_irda_set_mode(struct pxa_irda *si, int mode)
+{
+ if (si->pdata->transceiver_mode)
+ si->pdata->transceiver_mode(si->dev, mode);
+ else {
+ if (gpio_is_valid(si->pdata->gpio_pwdown))
+ gpio_set_value(si->pdata->gpio_pwdown,
+ !(mode & IR_OFF) ^
+ !si->pdata->gpio_pwdown_inverted);
+ pxa2xx_transceiver_mode(si->dev, mode);
+ }
+}
+
/*
* Set the IrDA communications speed.
*/
pxa_irda_disable_clk(si);
/* set board transceiver to SIR mode */
- si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
+ pxa_irda_set_mode(si, IR_SIRMODE);
/* enable the STUART clock */
pxa_irda_enable_sirclk(si);
ICCR0 = 0;
/* set board transceiver to FIR mode */
- si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
+ pxa_irda_set_mode(si, IR_FIRMODE);
/* enable the FICP clock */
pxa_irda_enable_firclk(si);
local_irq_restore(flags);
/* power off board transceiver */
- si->pdata->transceiver_mode(si->dev, IR_OFF);
+ pxa_irda_set_mode(si, IR_OFF);
printk(KERN_DEBUG "pxa_ir: irda shutdown\n");
}
if (err)
goto err_mem_5;
- if (si->pdata->startup)
+ if (gpio_is_valid(si->pdata->gpio_pwdown)) {
+ err = gpio_request(si->pdata->gpio_pwdown, "IrDA switch");
+ if (err)
+ goto err_startup;
+ err = gpio_direction_output(si->pdata->gpio_pwdown,
+ !si->pdata->gpio_pwdown_inverted);
+ if (err) {
+ gpio_free(si->pdata->gpio_pwdown);
+ goto err_startup;
+ }
+ }
+
+ if (si->pdata->startup) {
err = si->pdata->startup(si->dev);
- if (err)
- goto err_startup;
+ if (err)
+ goto err_startup;
+ }
+
+ if (gpio_is_valid(si->pdata->gpio_pwdown) && si->pdata->startup)
+ dev_warn(si->dev, "gpio_pwdown and startup() both defined!\n");
dev->netdev_ops = &pxa_irda_netdev_ops;
if (dev) {
struct pxa_irda *si = netdev_priv(dev);
unregister_netdev(dev);
+ if (gpio_is_valid(si->pdata->gpio_pwdown))
+ gpio_free(si->pdata->gpio_pwdown);
if (si->pdata->shutdown)
si->pdata->shutdown(si->dev);
kfree(si->tx_buff.head);
/*
* Ensure that the ports for this device are setup correctly.
*/
- if (si->pdata->startup)
- si->pdata->startup(si->dev);
+ if (si->pdata->startup) {
+ ret = si->pdata->startup(si->dev);
+ if (ret)
+ return ret;
+ }
/*
* Configure PPC for IRDA - we want to drive TXD2 low.
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
+#include <linux/sched.h>
#include <net/irda/irda.h>
cnx->remote_lp);
} else {
memcpy(&cnx->cap_ack_event, event,
- sizeof(&cnx->cap_ack_event));
+ sizeof(cnx->cap_ack_event));
cnx->state |= VETH_STATE_GOTCAPACK;
veth_kick_statemachine(cnx);
}
enum ixgbe_fc_mode last_lfc_mode;
/* Interrupt Throttle Rate */
- u32 itr_setting;
+ u32 rx_itr_setting;
+ u32 tx_itr_setting;
u16 eitr_low;
u16 eitr_high;
struct ixgbe_hw_stats stats;
/* Interrupt Throttle Rate */
- u32 eitr_param;
+ u32 rx_eitr_param;
+ u32 tx_eitr_param;
unsigned long state;
u64 tx_busy;
#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = -IXGBE_ERR_CONFIG;
+ ret_val = IXGBE_ERR_CONFIG;
goto out;
break;
}
switch (hw->device_id) {
case IXGBE_DEV_ID_82599_KX4:
+ case IXGBE_DEV_ID_82599_KX4_MEZZ:
+ case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
case IXGBE_DEV_ID_82599_XAUI_LOM:
/* Default device ID is mezzanine card KX/KX4 */
media_type = ixgbe_media_type_backplane;
/**
* ixgbe_update_uc_addr_list_generic - Updates MAC list of secondary addresses
* @hw: pointer to hardware structure
- * @addr_list: the list of new addresses
- * @addr_count: number of addresses
- * @next: iterator function to walk the address list
+ * @uc_list: the list of new addresses
*
* The given list replaces any existing list. Clears the secondary addrs from
* receive address registers. Uses unused receive address registers for the
#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = -IXGBE_ERR_CONFIG;
+ ret_val = IXGBE_ERR_CONFIG;
goto out;
break;
}
s32 ret_val = 0;
ixgbe_link_speed speed;
u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+ u32 links2, anlp1_reg, autoc_reg, links;
bool link_up;
/*
* AN should have completed when the cable was plugged in.
* Look for reasons to bail out. Bail out if:
* - FC autoneg is disabled, or if
- * - we don't have multispeed fiber, or if
- * - we're not running at 1G, or if
- * - link is not up, or if
- * - link is up but AN did not complete, or if
- * - link is up and AN completed but timed out
+ * - link is not up.
*
- * Since we're being called from an LSC, link is already know to be up.
+ * Since we're being called from an LSC, link is already known to be up.
* So use link_up_wait_to_complete=false.
*/
hw->mac.ops.check_link(hw, &speed, &link_up, false);
- linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
-
- if (hw->fc.disable_fc_autoneg ||
- !hw->phy.multispeed_fiber ||
- (speed != IXGBE_LINK_SPEED_1GB_FULL) ||
- !link_up ||
- ((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
- ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+
+ if (hw->fc.disable_fc_autoneg || (!link_up)) {
hw->fc.fc_was_autonegged = false;
hw->fc.current_mode = hw->fc.requested_mode;
- hw_dbg(hw, "Autoneg FC was skipped.\n");
goto out;
}
+ /*
+ * On backplane, bail out if
+ * - backplane autoneg was not completed, or if
+ * - link partner is not AN enabled
+ */
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
+ links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+ if (((links & IXGBE_LINKS_KX_AN_COMP) == 0) ||
+ ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0)) {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ goto out;
+ }
+ }
+
+ /*
+ * On multispeed fiber at 1g, bail out if
+ * - link is up but AN did not complete, or if
+ * - link is up and AN completed but timed out
+ */
+ if (hw->phy.multispeed_fiber && (speed == IXGBE_LINK_SPEED_1GB_FULL)) {
+ linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+ if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+ ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ goto out;
+ }
+ }
+
/*
* Read the AN advertisement and LP ability registers and resolve
* local flow control settings accordingly
*/
- pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
- pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
- if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+ if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+ (hw->phy.media_type != ixgbe_media_type_backplane)) {
+ pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+ pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+ if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE)) {
+ /*
+ * Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_full) {
+ hw->fc.current_mode = ixgbe_fc_full;
+ hw_dbg(hw, "Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+ }
+ } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+ (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+ hw->fc.current_mode = ixgbe_fc_tx_pause;
+ hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+ } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
+ !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
+ (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_none;
+ hw_dbg(hw, "Flow Control = NONE.\n");
+ }
+ }
+
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
/*
- * Now we need to check if the user selected Rx ONLY
- * of pause frames. In this case, we had to advertise
- * FULL flow control because we could not advertise RX
- * ONLY. Hence, we must now check to see if we need to
- * turn OFF the TRANSMISSION of PAUSE frames.
+ * Read the 10g AN autoc and LP ability registers and resolve
+ * local flow control settings accordingly
*/
- if (hw->fc.requested_mode == ixgbe_fc_full) {
- hw->fc.current_mode = ixgbe_fc_full;
- hw_dbg(hw, "Flow Control = FULL.\n");
- } else {
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+ if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+ (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE)) {
+ /*
+ * Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_full) {
+ hw->fc.current_mode = ixgbe_fc_full;
+ hw_dbg(hw, "Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ hw_dbg(hw, "Flow Control=RX PAUSE only\n");
+ }
+ } else if (!(autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+ (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+ (anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+ (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
+ hw->fc.current_mode = ixgbe_fc_tx_pause;
+ hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+ } else if ((autoc_reg & IXGBE_AUTOC_SYM_PAUSE) &&
+ (autoc_reg & IXGBE_AUTOC_ASM_PAUSE) &&
+ !(anlp1_reg & IXGBE_ANLP1_SYM_PAUSE) &&
+ (anlp1_reg & IXGBE_ANLP1_ASM_PAUSE)) {
hw->fc.current_mode = ixgbe_fc_rx_pause;
hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_none;
+ hw_dbg(hw, "Flow Control = NONE.\n");
}
- } else if (!(pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
- (pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
- hw->fc.current_mode = ixgbe_fc_tx_pause;
- hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
- } else if ((pcs_anadv_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_anadv_reg & IXGBE_PCS1GANA_ASM_PAUSE) &&
- !(pcs_lpab_reg & IXGBE_PCS1GANA_SYM_PAUSE) &&
- (pcs_lpab_reg & IXGBE_PCS1GANA_ASM_PAUSE)) {
- hw->fc.current_mode = ixgbe_fc_rx_pause;
- hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
- } else {
- hw->fc.current_mode = ixgbe_fc_none;
- hw_dbg(hw, "Flow Control = NONE.\n");
}
-
/* Record that current_mode is the result of a successful autoneg */
hw->fc.fc_was_autonegged = true;
#endif /* CONFIG_DCB */
default:
hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = -IXGBE_ERR_CONFIG;
+ ret_val = IXGBE_ERR_CONFIG;
goto out;
break;
}
IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
- /* Enable and restart autoneg to inform the link partner */
- reg |= IXGBE_PCS1GLCTL_AN_ENABLE | IXGBE_PCS1GLCTL_AN_RESTART;
-
/* Disable AN timeout */
if (hw->fc.strict_ieee)
reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+ /*
+ * Set up the 10G flow control advertisement registers so the HW
+ * can do fc autoneg once the cable is plugged in. If we end up
+ * using 1g instead, this is harmless.
+ */
+ reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ /*
+ * The possible values of fc.requested_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_none:
+ /* Flow control completely disabled by software override. */
+ reg &= ~(IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ reg |= (IXGBE_AUTOC_ASM_PAUSE);
+ reg &= ~(IXGBE_AUTOC_SYM_PAUSE);
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ reg |= (IXGBE_AUTOC_SYM_PAUSE | IXGBE_AUTOC_ASM_PAUSE);
+ break;
+#ifdef CONFIG_DCB
+ case ixgbe_fc_pfc:
+ goto out;
+ break;
+#endif /* CONFIG_DCB */
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+ /*
+ * AUTOC restart handles negotiation of 1G and 10G. There is
+ * no need to set the PCS1GCTL register.
+ */
+ reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg);
+ hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
+
out:
return ret_val;
}
while (timeout) {
if (ixgbe_get_eeprom_semaphore(hw))
- return -IXGBE_ERR_SWFW_SYNC;
+ return IXGBE_ERR_SWFW_SYNC;
gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
if (!(gssr & (fwmask | swmask)))
if (!timeout) {
hw_dbg(hw, "Driver can't access resource, GSSR timeout.\n");
- return -IXGBE_ERR_SWFW_SYNC;
+ return IXGBE_ERR_SWFW_SYNC;
}
gssr |= swmask;
{"tx_packets", IXGBE_STAT(net_stats.tx_packets)},
{"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)},
{"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)},
+ {"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
+ {"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
+ {"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
+ {"tx_bytes_nic", IXGBE_STAT(stats.gotc)},
{"lsc_int", IXGBE_STAT(lsc_int)},
{"tx_busy", IXGBE_STAT(tx_busy)},
{"non_eop_descs", IXGBE_STAT(non_eop_descs)},
{
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_ring *temp_tx_ring, *temp_rx_ring;
- int i, err;
+ int i, err = 0;
u32 new_rx_count, new_tx_count;
bool need_update = false;
while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
msleep(1);
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i].count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i].count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto err_setup;
+ }
+
temp_tx_ring = kcalloc(adapter->num_tx_queues,
sizeof(struct ixgbe_ring), GFP_KERNEL);
if (!temp_tx_ring) {
/* if rings need to be updated, here's the place to do it in one shot */
if (need_update) {
- if (netif_running(netdev))
- ixgbe_down(adapter);
+ ixgbe_down(adapter);
/* tx */
if (new_tx_count != adapter->tx_ring_count) {
temp_rx_ring = NULL;
adapter->rx_ring_count = new_rx_count;
}
- }
-
- /* success! */
- err = 0;
- if (netif_running(netdev))
ixgbe_up(adapter);
-
+ }
err_setup:
clear_bit(__IXGBE_RESETTING, &adapter->state);
return err;
ec->tx_max_coalesced_frames_irq = adapter->tx_ring[0].work_limit;
/* only valid if in constant ITR mode */
- switch (adapter->itr_setting) {
+ switch (adapter->rx_itr_setting) {
case 0:
/* throttling disabled */
ec->rx_coalesce_usecs = 0;
break;
default:
/* fixed interrupt rate mode */
- ec->rx_coalesce_usecs = 1000000/adapter->eitr_param;
+ ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param;
+ break;
+ }
+
+ /* only valid if in constant ITR mode */
+ switch (adapter->tx_itr_setting) {
+ case 0:
+ /* throttling disabled */
+ ec->tx_coalesce_usecs = 0;
+ break;
+ case 1:
+ /* dynamic ITR mode */
+ ec->tx_coalesce_usecs = 1;
+ break;
+ default:
+ ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param;
break;
}
+
return 0;
}
struct ixgbe_q_vector *q_vector;
int i;
+ /*
+ * don't accept tx specific changes if we've got mixed RxTx vectors
+ * test and jump out here if needed before changing the rx numbers
+ */
+ if ((1000000/ec->tx_coalesce_usecs) != adapter->tx_eitr_param &&
+ adapter->q_vector[0]->txr_count && adapter->q_vector[0]->rxr_count)
+ return -EINVAL;
+
if (ec->tx_max_coalesced_frames_irq)
adapter->tx_ring[0].work_limit = ec->tx_max_coalesced_frames_irq;
return -EINVAL;
/* store the value in ints/second */
- adapter->eitr_param = 1000000/ec->rx_coalesce_usecs;
+ adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
/* static value of interrupt rate */
- adapter->itr_setting = adapter->eitr_param;
+ adapter->rx_itr_setting = adapter->rx_eitr_param;
/* clear the lower bit as its used for dynamic state */
- adapter->itr_setting &= ~1;
+ adapter->rx_itr_setting &= ~1;
} else if (ec->rx_coalesce_usecs == 1) {
/* 1 means dynamic mode */
- adapter->eitr_param = 20000;
- adapter->itr_setting = 1;
+ adapter->rx_eitr_param = 20000;
+ adapter->rx_itr_setting = 1;
} else {
/*
* any other value means disable eitr, which is best
* served by setting the interrupt rate very high
*/
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
- adapter->eitr_param = IXGBE_MAX_RSC_INT_RATE;
+ adapter->rx_eitr_param = IXGBE_MAX_RSC_INT_RATE;
else
- adapter->eitr_param = IXGBE_MAX_INT_RATE;
- adapter->itr_setting = 0;
+ adapter->rx_eitr_param = IXGBE_MAX_INT_RATE;
+ adapter->rx_itr_setting = 0;
+ }
+
+ if (ec->tx_coalesce_usecs > 1) {
+ /* check the limits */
+ if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
+ (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE))
+ return -EINVAL;
+
+ /* store the value in ints/second */
+ adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs;
+
+ /* static value of interrupt rate */
+ adapter->tx_itr_setting = adapter->tx_eitr_param;
+
+ /* clear the lower bit as its used for dynamic state */
+ adapter->tx_itr_setting &= ~1;
+ } else if (ec->tx_coalesce_usecs == 1) {
+ /* 1 means dynamic mode */
+ adapter->tx_eitr_param = 10000;
+ adapter->tx_itr_setting = 1;
+ } else {
+ adapter->tx_eitr_param = IXGBE_MAX_INT_RATE;
+ adapter->tx_itr_setting = 0;
}
/* MSI/MSIx Interrupt Mode */
for (i = 0; i < num_vectors; i++) {
q_vector = adapter->q_vector[i];
if (q_vector->txr_count && !q_vector->rxr_count)
- /* tx vector gets half the rate */
- q_vector->eitr = (adapter->eitr_param >> 1);
+ /* tx only */
+ q_vector->eitr = adapter->tx_eitr_param;
else
/* rx only or mixed */
- q_vector->eitr = adapter->eitr_param;
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
/* Legacy Interrupt Mode */
} else {
q_vector = adapter->q_vector[0];
- q_vector->eitr = adapter->eitr_param;
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
static const char ixgbe_driver_string[] =
"Intel(R) 10 Gigabit PCI Express Network Driver";
-#define DRV_VERSION "2.0.37-k2"
+#define DRV_VERSION "2.0.44-k2"
const char ixgbe_driver_version[] = DRV_VERSION;
static char ixgbe_copyright[] = "Copyright (c) 1999-2009 Intel Corporation.";
board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ),
+ board_82599 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
+ board_82599 },
/* required last entry */
{0, }
r_idx + 1);
}
- /* if this is a tx only vector halve the interrupt rate */
if (q_vector->txr_count && !q_vector->rxr_count)
- q_vector->eitr = (adapter->eitr_param >> 1);
+ /* tx only */
+ q_vector->eitr = adapter->tx_eitr_param;
else if (q_vector->rxr_count)
- /* rx only */
- q_vector->eitr = adapter->eitr_param;
+ /* rx or mixed */
+ q_vector->eitr = adapter->rx_eitr_param;
ixgbe_write_eitr(q_vector);
}
/* If all Rx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter,
/* If all Rx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter,
if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
work_done = budget;
- /* If all Rx work done, exit the polling mode */
+ /* If all Tx work done, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->tx_itr_setting & 1)
ixgbe_set_itr_msix(q_vector);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx));
struct ixgbe_hw *hw = &adapter->hw;
IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
- EITR_INTS_PER_SEC_TO_REG(adapter->eitr_param));
+ EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param));
ixgbe_set_ivar(adapter, 0, 0, 0);
ixgbe_set_ivar(adapter, 1, 0, 0);
IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0);
adapter->tx_ring[i].head = IXGBE_TDH(j);
adapter->tx_ring[i].tail = IXGBE_TDT(j);
- /* Disable Tx Head Writeback RO bit, since this hoses
+ /*
+ * Disable Tx Head Writeback RO bit, since this hoses
* bookkeeping if things aren't delivered in order.
*/
- txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
+ break;
+ case ixgbe_mac_82599EB:
+ default:
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(j));
+ break;
+ }
txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
+ break;
+ case ixgbe_mac_82599EB:
+ default:
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(j), txctrl);
+ break;
+ }
}
if (hw->mac.type == ixgbe_mac_82599EB) {
/* We enable 8 traffic classes, DCB only */
return mrqc;
}
+/**
+ * ixgbe_configure_rscctl - enable RSC for the indicated ring
+ * @adapter: address of board private structure
+ * @index: index of ring to set
+ * @rx_buf_len: rx buffer length
+ **/
+static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, int index,
+ int rx_buf_len)
+{
+ struct ixgbe_ring *rx_ring;
+ struct ixgbe_hw *hw = &adapter->hw;
+ int j;
+ u32 rscctrl;
+
+ rx_ring = &adapter->rx_ring[index];
+ j = rx_ring->reg_idx;
+ rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
+ rscctrl |= IXGBE_RSCCTL_RSCEN;
+ /*
+ * we must limit the number of descriptors so that the
+ * total size of max desc * buf_len is not greater
+ * than 65535
+ */
+ if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
+#if (MAX_SKB_FRAGS > 16)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+#elif (MAX_SKB_FRAGS > 8)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+#elif (MAX_SKB_FRAGS > 4)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+#else
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
+#endif
+ } else {
+ if (rx_buf_len < IXGBE_RXBUFFER_4096)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+ else if (rx_buf_len < IXGBE_RXBUFFER_8192)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+ else
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
+}
+
/**
* ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
* @adapter: board private structure
u32 fctrl, hlreg0;
u32 reta = 0, mrqc = 0;
u32 rdrxctl;
- u32 rscctrl;
int rx_buf_len;
/* Decide whether to use packet split mode or not */
if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
/* Enable 82599 HW-RSC */
- for (i = 0; i < adapter->num_rx_queues; i++) {
- rx_ring = &adapter->rx_ring[i];
- j = rx_ring->reg_idx;
- rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(j));
- rscctrl |= IXGBE_RSCCTL_RSCEN;
- /*
- * we must limit the number of descriptors so that the
- * total size of max desc * buf_len is not greater
- * than 65535
- */
- if (rx_ring->flags & IXGBE_RING_RX_PS_ENABLED) {
-#if (MAX_SKB_FRAGS > 16)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
-#elif (MAX_SKB_FRAGS > 8)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
-#elif (MAX_SKB_FRAGS > 4)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
-#else
- rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
-#endif
- } else {
- if (rx_buf_len < IXGBE_RXBUFFER_4096)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
- else if (rx_buf_len < IXGBE_RXBUFFER_8192)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
- else
- rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
- }
- IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(j), rscctrl);
- }
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbe_configure_rscctl(adapter, i, rx_buf_len);
+
/* Disable RSC for ACK packets */
IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
(IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
ixgbe_napi_disable_all(adapter);
+ clear_bit(__IXGBE_SFP_MODULE_NOT_FOUND, &adapter->state);
+ del_timer_sync(&adapter->sfp_timer);
del_timer_sync(&adapter->watchdog_timer);
cancel_work_sync(&adapter->watchdog_task);
/* If budget not fully consumed, exit the polling mode */
if (work_done < budget) {
napi_complete(napi);
- if (adapter->itr_setting & 1)
+ if (adapter->rx_itr_setting & 1)
ixgbe_set_itr(adapter);
if (!test_bit(__IXGBE_DOWN, &adapter->state))
ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
if (!q_vector)
goto err_out;
q_vector->adapter = adapter;
- q_vector->eitr = adapter->eitr_param;
+ if (q_vector->txr_count && !q_vector->rxr_count)
+ q_vector->eitr = adapter->tx_eitr_param;
+ else
+ q_vector->eitr = adapter->rx_eitr_param;
q_vector->v_idx = q_idx;
netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
adapter->q_vector[q_idx] = q_vector;
hw->fc.disable_fc_autoneg = false;
/* enable itr by default in dynamic mode */
- adapter->itr_setting = 1;
- adapter->eitr_param = 20000;
+ adapter->rx_itr_setting = 1;
+ adapter->rx_eitr_param = 20000;
+ adapter->tx_itr_setting = 1;
+ adapter->tx_eitr_param = 10000;
/* set defaults for eitr in MegaBytes */
adapter->eitr_low = 10;
/* 82598 hardware only has a 32 bit counter in the high register */
if (hw->mac.type == ixgbe_mac_82599EB) {
+ u64 tmp;
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
- IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
+ tmp = IXGBE_READ_REG(hw, IXGBE_GORCH) & 0xF; /* 4 high bits of GORC */
+ adapter->stats.gorc += (tmp << 32);
adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
- IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
+ tmp = IXGBE_READ_REG(hw, IXGBE_GOTCH) & 0xF; /* 4 high bits of GOTC */
+ adapter->stats.gotc += (tmp << 32);
adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL);
IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
/* Right now, we support IPv4 only */
struct ixgbe_atr_input atr_input;
struct tcphdr *th;
- struct udphdr *uh;
struct iphdr *iph = ip_hdr(skb);
struct ethhdr *eth = (struct ethhdr *)skb->data;
u16 vlan_id, src_port, dst_port, flex_bytes;
dst_port = th->dest;
l4type |= IXGBE_ATR_L4TYPE_TCP;
/* l4type IPv4 type is 0, no need to assign */
- } else if(iph->protocol == IPPROTO_UDP) {
- uh = udp_hdr(skb);
- src_port = uh->source;
- dst_port = uh->dest;
- l4type |= IXGBE_ATR_L4TYPE_UDP;
- /* l4type IPv4 type is 0, no need to assign */
} else {
/* Unsupported L4 header, just bail here */
return;
goto err_pci_reg;
}
- err = pci_enable_pcie_error_reporting(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
- "0x%x\n", err);
- /* non-fatal, continue */
- }
+ pci_enable_pcie_error_reporting(pdev);
pci_set_master(pdev);
pci_save_state(pdev);
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct ixgbe_adapter *adapter = netdev_priv(netdev);
- int err;
set_bit(__IXGBE_DOWN, &adapter->state);
/* clear the module not found bit to make sure the worker won't
free_netdev(netdev);
- err = pci_disable_pcie_error_reporting(pdev);
- if (err)
- dev_err(&pdev->dev,
- "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+ pci_disable_pcie_error_reporting(pdev);
pci_disable_device(pdev);
}
#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1
#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4
#define IXGBE_DEV_ID_82599_KX4 0x10F7
+#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514
#define IXGBE_DEV_ID_82599_CX4 0x10F9
#define IXGBE_DEV_ID_82599_SFP 0x10FB
#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC
+#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
/* General Registers */
#define IXGBE_CTRL 0x00000
#define IXGBE_AUTOC_KX4_SUPP 0x80000000
#define IXGBE_AUTOC_KX_SUPP 0x40000000
#define IXGBE_AUTOC_PAUSE 0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE 0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE 0x10000000
#define IXGBE_AUTOC_RF 0x08000000
#define IXGBE_AUTOC_PD_TMR 0x06000000
#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */
#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040
+
/* PCS1GLSTA Bit Masks */
#define IXGBE_PCS1GLSTA_LINK_OK 1
#define IXGBE_PCS1GLSTA_SYNK_OK 0x10
#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000
#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE 0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE 0x0400
+#define IXGBE_ANLP1_ASM_PAUSE 0x0800
+
/* SW Semaphore Register bitmasks */
#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
}
};
-struct enp2611_ixpdev_priv
-{
- struct ixpdev_priv ixpdev_priv;
- struct net_device_stats stats;
-};
-
static struct net_device *nds[3];
static struct timer_list link_check_timer;
-static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
-{
- struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
-
- pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
-
- return &(ip->stats);
-}
-
/* @@@ Poll the SFP moddef0 line too. */
/* @@@ Try to use the pm3386 DOOL interrupt as well. */
static void enp2611_check_link_status(unsigned long __dummy)
ports = pm3386_port_count();
for (i = 0; i < ports; i++) {
- nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
+ nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv));
if (nds[i] == NULL) {
while (--i >= 0)
free_netdev(nds[i]);
return -ENOMEM;
}
- nds[i]->get_stats = enp2611_get_stats;
pm3386_init_port(i);
pm3386_get_mac(i, nds[i]->dev_addr);
}
#include "ixp2400_tx.ucode"
#include "ixpdev_priv.h"
#include "ixpdev.h"
+#include "pm3386.h"
#define DRV_MODULE_VERSION "0.2"
return 0;
}
+static struct net_device_stats *ixpdev_get_stats(struct net_device *dev)
+{
+ struct ixpdev_priv *ip = netdev_priv(dev);
+
+ pm3386_get_stats(ip->channel, &(dev->stats));
+
+ return &(dev->stats);
+}
+
static const struct net_device_ops ixpdev_netdev_ops = {
.ndo_open = ixpdev_open,
.ndo_stop = ixpdev_close,
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_get_stats = ixpdev_get_stats,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = ixpdev_poll_controller,
#endif
ks_err(ks, "spi_sync() failed\n");
}
+/**
+ * ks8851_wrreg8 - write 8bit register value to chip
+ * @ks: The chip state
+ * @reg: The register address
+ * @val: The value to write
+ *
+ * Issue a write to put the value @val into the register specified in @reg.
+ */
+static void ks8851_wrreg8(struct ks8851_net *ks, unsigned reg, unsigned val)
+{
+ struct spi_transfer *xfer = &ks->spi_xfer1;
+ struct spi_message *msg = &ks->spi_msg1;
+ __le16 txb[2];
+ int ret;
+ int bit;
+
+ bit = 1 << (reg & 3);
+
+ txb[0] = cpu_to_le16(MK_OP(bit, reg) | KS_SPIOP_WR);
+ txb[1] = val;
+
+ xfer->tx_buf = txb;
+ xfer->rx_buf = NULL;
+ xfer->len = 3;
+
+ ret = spi_sync(ks->spidev, msg);
+ if (ret < 0)
+ ks_err(ks, "spi_sync() failed\n");
+}
+
/**
* ks8851_rx_1msg - select whether to use one or two messages for spi read
* @ks: The device structure
static int ks8851_write_mac_addr(struct net_device *dev)
{
struct ks8851_net *ks = netdev_priv(dev);
- u16 *mcp = (u16 *)dev->dev_addr;
+ int i;
mutex_lock(&ks->lock);
- ks8851_wrreg16(ks, KS_MARL, mcp[0]);
- ks8851_wrreg16(ks, KS_MARM, mcp[1]);
- ks8851_wrreg16(ks, KS_MARH, mcp[2]);
+ for (i = 0; i < ETH_ALEN; i++)
+ ks8851_wrreg8(ks, KS_MAR(i), dev->dev_addr[i]);
mutex_unlock(&ks->lock);
mcptr = mcptr->next;
}
- rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXAE | RXCR1_RXPAFMA;
+ rxctrl.rxcr1 = RXCR1_RXME | RXCR1_RXPAFMA;
} else {
/* just accept broadcast / unicast */
rxctrl.rxcr1 = RXCR1_RXPAFMA;
ndev->netdev_ops = &ks8851_netdev_ops;
ndev->irq = spi->irq;
+ /* issue a global soft reset to reset the device. */
+ ks8851_soft_reset(ks, GRR_GSR);
+
/* simple check for a valid chip being connected to the bus */
if ((ks8851_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
#define CCR_32PIN (1 << 0)
/* MAC address registers */
+#define KS_MAR(_m) 0x15 - (_m)
#define KS_MARL 0x10
#define KS_MARM 0x12
#define KS_MARH 0x14
--- /dev/null
+/**
+ * drivers/net/ks8851_mll.c
+ * Copyright (c) 2009 Micrel Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+/**
+ * Supports:
+ * KS8851 16bit MLL chip from Micrel Inc.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/cache.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#define DRV_NAME "ks8851_mll"
+
+static u8 KS_DEFAULT_MAC_ADDRESS[] = { 0x00, 0x10, 0xA1, 0x86, 0x95, 0x11 };
+#define MAX_RECV_FRAMES 32
+#define MAX_BUF_SIZE 2048
+#define TX_BUF_SIZE 2000
+#define RX_BUF_SIZE 2000
+
+#define KS_CCR 0x08
+#define CCR_EEPROM (1 << 9)
+#define CCR_SPI (1 << 8)
+#define CCR_8BIT (1 << 7)
+#define CCR_16BIT (1 << 6)
+#define CCR_32BIT (1 << 5)
+#define CCR_SHARED (1 << 4)
+#define CCR_32PIN (1 << 0)
+
+/* MAC address registers */
+#define KS_MARL 0x10
+#define KS_MARM 0x12
+#define KS_MARH 0x14
+
+#define KS_OBCR 0x20
+#define OBCR_ODS_16MA (1 << 6)
+
+#define KS_EEPCR 0x22
+#define EEPCR_EESA (1 << 4)
+#define EEPCR_EESB (1 << 3)
+#define EEPCR_EEDO (1 << 2)
+#define EEPCR_EESCK (1 << 1)
+#define EEPCR_EECS (1 << 0)
+
+#define KS_MBIR 0x24
+#define MBIR_TXMBF (1 << 12)
+#define MBIR_TXMBFA (1 << 11)
+#define MBIR_RXMBF (1 << 4)
+#define MBIR_RXMBFA (1 << 3)
+
+#define KS_GRR 0x26
+#define GRR_QMU (1 << 1)
+#define GRR_GSR (1 << 0)
+
+#define KS_WFCR 0x2A
+#define WFCR_MPRXE (1 << 7)
+#define WFCR_WF3E (1 << 3)
+#define WFCR_WF2E (1 << 2)
+#define WFCR_WF1E (1 << 1)
+#define WFCR_WF0E (1 << 0)
+
+#define KS_WF0CRC0 0x30
+#define KS_WF0CRC1 0x32
+#define KS_WF0BM0 0x34
+#define KS_WF0BM1 0x36
+#define KS_WF0BM2 0x38
+#define KS_WF0BM3 0x3A
+
+#define KS_WF1CRC0 0x40
+#define KS_WF1CRC1 0x42
+#define KS_WF1BM0 0x44
+#define KS_WF1BM1 0x46
+#define KS_WF1BM2 0x48
+#define KS_WF1BM3 0x4A
+
+#define KS_WF2CRC0 0x50
+#define KS_WF2CRC1 0x52
+#define KS_WF2BM0 0x54
+#define KS_WF2BM1 0x56
+#define KS_WF2BM2 0x58
+#define KS_WF2BM3 0x5A
+
+#define KS_WF3CRC0 0x60
+#define KS_WF3CRC1 0x62
+#define KS_WF3BM0 0x64
+#define KS_WF3BM1 0x66
+#define KS_WF3BM2 0x68
+#define KS_WF3BM3 0x6A
+
+#define KS_TXCR 0x70
+#define TXCR_TCGICMP (1 << 8)
+#define TXCR_TCGUDP (1 << 7)
+#define TXCR_TCGTCP (1 << 6)
+#define TXCR_TCGIP (1 << 5)
+#define TXCR_FTXQ (1 << 4)
+#define TXCR_TXFCE (1 << 3)
+#define TXCR_TXPE (1 << 2)
+#define TXCR_TXCRC (1 << 1)
+#define TXCR_TXE (1 << 0)
+
+#define KS_TXSR 0x72
+#define TXSR_TXLC (1 << 13)
+#define TXSR_TXMC (1 << 12)
+#define TXSR_TXFID_MASK (0x3f << 0)
+#define TXSR_TXFID_SHIFT (0)
+#define TXSR_TXFID_GET(_v) (((_v) >> 0) & 0x3f)
+
+
+#define KS_RXCR1 0x74
+#define RXCR1_FRXQ (1 << 15)
+#define RXCR1_RXUDPFCC (1 << 14)
+#define RXCR1_RXTCPFCC (1 << 13)
+#define RXCR1_RXIPFCC (1 << 12)
+#define RXCR1_RXPAFMA (1 << 11)
+#define RXCR1_RXFCE (1 << 10)
+#define RXCR1_RXEFE (1 << 9)
+#define RXCR1_RXMAFMA (1 << 8)
+#define RXCR1_RXBE (1 << 7)
+#define RXCR1_RXME (1 << 6)
+#define RXCR1_RXUE (1 << 5)
+#define RXCR1_RXAE (1 << 4)
+#define RXCR1_RXINVF (1 << 1)
+#define RXCR1_RXE (1 << 0)
+#define RXCR1_FILTER_MASK (RXCR1_RXINVF | RXCR1_RXAE | \
+ RXCR1_RXMAFMA | RXCR1_RXPAFMA)
+
+#define KS_RXCR2 0x76
+#define RXCR2_SRDBL_MASK (0x7 << 5)
+#define RXCR2_SRDBL_SHIFT (5)
+#define RXCR2_SRDBL_4B (0x0 << 5)
+#define RXCR2_SRDBL_8B (0x1 << 5)
+#define RXCR2_SRDBL_16B (0x2 << 5)
+#define RXCR2_SRDBL_32B (0x3 << 5)
+/* #define RXCR2_SRDBL_FRAME (0x4 << 5) */
+#define RXCR2_IUFFP (1 << 4)
+#define RXCR2_RXIUFCEZ (1 << 3)
+#define RXCR2_UDPLFE (1 << 2)
+#define RXCR2_RXICMPFCC (1 << 1)
+#define RXCR2_RXSAF (1 << 0)
+
+#define KS_TXMIR 0x78
+
+#define KS_RXFHSR 0x7C
+#define RXFSHR_RXFV (1 << 15)
+#define RXFSHR_RXICMPFCS (1 << 13)
+#define RXFSHR_RXIPFCS (1 << 12)
+#define RXFSHR_RXTCPFCS (1 << 11)
+#define RXFSHR_RXUDPFCS (1 << 10)
+#define RXFSHR_RXBF (1 << 7)
+#define RXFSHR_RXMF (1 << 6)
+#define RXFSHR_RXUF (1 << 5)
+#define RXFSHR_RXMR (1 << 4)
+#define RXFSHR_RXFT (1 << 3)
+#define RXFSHR_RXFTL (1 << 2)
+#define RXFSHR_RXRF (1 << 1)
+#define RXFSHR_RXCE (1 << 0)
+#define RXFSHR_ERR (RXFSHR_RXCE | RXFSHR_RXRF |\
+ RXFSHR_RXFTL | RXFSHR_RXMR |\
+ RXFSHR_RXICMPFCS | RXFSHR_RXIPFCS |\
+ RXFSHR_RXTCPFCS)
+#define KS_RXFHBCR 0x7E
+#define RXFHBCR_CNT_MASK 0x0FFF
+
+#define KS_TXQCR 0x80
+#define TXQCR_AETFE (1 << 2)
+#define TXQCR_TXQMAM (1 << 1)
+#define TXQCR_METFE (1 << 0)
+
+#define KS_RXQCR 0x82
+#define RXQCR_RXDTTS (1 << 12)
+#define RXQCR_RXDBCTS (1 << 11)
+#define RXQCR_RXFCTS (1 << 10)
+#define RXQCR_RXIPHTOE (1 << 9)
+#define RXQCR_RXDTTE (1 << 7)
+#define RXQCR_RXDBCTE (1 << 6)
+#define RXQCR_RXFCTE (1 << 5)
+#define RXQCR_ADRFE (1 << 4)
+#define RXQCR_SDA (1 << 3)
+#define RXQCR_RRXEF (1 << 0)
+#define RXQCR_CMD_CNTL (RXQCR_RXFCTE|RXQCR_ADRFE)
+
+#define KS_TXFDPR 0x84
+#define TXFDPR_TXFPAI (1 << 14)
+#define TXFDPR_TXFP_MASK (0x7ff << 0)
+#define TXFDPR_TXFP_SHIFT (0)
+
+#define KS_RXFDPR 0x86
+#define RXFDPR_RXFPAI (1 << 14)
+
+#define KS_RXDTTR 0x8C
+#define KS_RXDBCTR 0x8E
+
+#define KS_IER 0x90
+#define KS_ISR 0x92
+#define IRQ_LCI (1 << 15)
+#define IRQ_TXI (1 << 14)
+#define IRQ_RXI (1 << 13)
+#define IRQ_RXOI (1 << 11)
+#define IRQ_TXPSI (1 << 9)
+#define IRQ_RXPSI (1 << 8)
+#define IRQ_TXSAI (1 << 6)
+#define IRQ_RXWFDI (1 << 5)
+#define IRQ_RXMPDI (1 << 4)
+#define IRQ_LDI (1 << 3)
+#define IRQ_EDI (1 << 2)
+#define IRQ_SPIBEI (1 << 1)
+#define IRQ_DEDI (1 << 0)
+
+#define KS_RXFCTR 0x9C
+#define RXFCTR_THRESHOLD_MASK 0x00FF
+
+#define KS_RXFC 0x9D
+#define RXFCTR_RXFC_MASK (0xff << 8)
+#define RXFCTR_RXFC_SHIFT (8)
+#define RXFCTR_RXFC_GET(_v) (((_v) >> 8) & 0xff)
+#define RXFCTR_RXFCT_MASK (0xff << 0)
+#define RXFCTR_RXFCT_SHIFT (0)
+
+#define KS_TXNTFSR 0x9E
+
+#define KS_MAHTR0 0xA0
+#define KS_MAHTR1 0xA2
+#define KS_MAHTR2 0xA4
+#define KS_MAHTR3 0xA6
+
+#define KS_FCLWR 0xB0
+#define KS_FCHWR 0xB2
+#define KS_FCOWR 0xB4
+
+#define KS_CIDER 0xC0
+#define CIDER_ID 0x8870
+#define CIDER_REV_MASK (0x7 << 1)
+#define CIDER_REV_SHIFT (1)
+#define CIDER_REV_GET(_v) (((_v) >> 1) & 0x7)
+
+#define KS_CGCR 0xC6
+#define KS_IACR 0xC8
+#define IACR_RDEN (1 << 12)
+#define IACR_TSEL_MASK (0x3 << 10)
+#define IACR_TSEL_SHIFT (10)
+#define IACR_TSEL_MIB (0x3 << 10)
+#define IACR_ADDR_MASK (0x1f << 0)
+#define IACR_ADDR_SHIFT (0)
+
+#define KS_IADLR 0xD0
+#define KS_IAHDR 0xD2
+
+#define KS_PMECR 0xD4
+#define PMECR_PME_DELAY (1 << 14)
+#define PMECR_PME_POL (1 << 12)
+#define PMECR_WOL_WAKEUP (1 << 11)
+#define PMECR_WOL_MAGICPKT (1 << 10)
+#define PMECR_WOL_LINKUP (1 << 9)
+#define PMECR_WOL_ENERGY (1 << 8)
+#define PMECR_AUTO_WAKE_EN (1 << 7)
+#define PMECR_WAKEUP_NORMAL (1 << 6)
+#define PMECR_WKEVT_MASK (0xf << 2)
+#define PMECR_WKEVT_SHIFT (2)
+#define PMECR_WKEVT_GET(_v) (((_v) >> 2) & 0xf)
+#define PMECR_WKEVT_ENERGY (0x1 << 2)
+#define PMECR_WKEVT_LINK (0x2 << 2)
+#define PMECR_WKEVT_MAGICPKT (0x4 << 2)
+#define PMECR_WKEVT_FRAME (0x8 << 2)
+#define PMECR_PM_MASK (0x3 << 0)
+#define PMECR_PM_SHIFT (0)
+#define PMECR_PM_NORMAL (0x0 << 0)
+#define PMECR_PM_ENERGY (0x1 << 0)
+#define PMECR_PM_SOFTDOWN (0x2 << 0)
+#define PMECR_PM_POWERSAVE (0x3 << 0)
+
+/* Standard MII PHY data */
+#define KS_P1MBCR 0xE4
+#define P1MBCR_FORCE_FDX (1 << 8)
+
+#define KS_P1MBSR 0xE6
+#define P1MBSR_AN_COMPLETE (1 << 5)
+#define P1MBSR_AN_CAPABLE (1 << 3)
+#define P1MBSR_LINK_UP (1 << 2)
+
+#define KS_PHY1ILR 0xE8
+#define KS_PHY1IHR 0xEA
+#define KS_P1ANAR 0xEC
+#define KS_P1ANLPR 0xEE
+
+#define KS_P1SCLMD 0xF4
+#define P1SCLMD_LEDOFF (1 << 15)
+#define P1SCLMD_TXIDS (1 << 14)
+#define P1SCLMD_RESTARTAN (1 << 13)
+#define P1SCLMD_DISAUTOMDIX (1 << 10)
+#define P1SCLMD_FORCEMDIX (1 << 9)
+#define P1SCLMD_AUTONEGEN (1 << 7)
+#define P1SCLMD_FORCE100 (1 << 6)
+#define P1SCLMD_FORCEFDX (1 << 5)
+#define P1SCLMD_ADV_FLOW (1 << 4)
+#define P1SCLMD_ADV_100BT_FDX (1 << 3)
+#define P1SCLMD_ADV_100BT_HDX (1 << 2)
+#define P1SCLMD_ADV_10BT_FDX (1 << 1)
+#define P1SCLMD_ADV_10BT_HDX (1 << 0)
+
+#define KS_P1CR 0xF6
+#define P1CR_HP_MDIX (1 << 15)
+#define P1CR_REV_POL (1 << 13)
+#define P1CR_OP_100M (1 << 10)
+#define P1CR_OP_FDX (1 << 9)
+#define P1CR_OP_MDI (1 << 7)
+#define P1CR_AN_DONE (1 << 6)
+#define P1CR_LINK_GOOD (1 << 5)
+#define P1CR_PNTR_FLOW (1 << 4)
+#define P1CR_PNTR_100BT_FDX (1 << 3)
+#define P1CR_PNTR_100BT_HDX (1 << 2)
+#define P1CR_PNTR_10BT_FDX (1 << 1)
+#define P1CR_PNTR_10BT_HDX (1 << 0)
+
+/* TX Frame control */
+
+#define TXFR_TXIC (1 << 15)
+#define TXFR_TXFID_MASK (0x3f << 0)
+#define TXFR_TXFID_SHIFT (0)
+
+#define KS_P1SR 0xF8
+#define P1SR_HP_MDIX (1 << 15)
+#define P1SR_REV_POL (1 << 13)
+#define P1SR_OP_100M (1 << 10)
+#define P1SR_OP_FDX (1 << 9)
+#define P1SR_OP_MDI (1 << 7)
+#define P1SR_AN_DONE (1 << 6)
+#define P1SR_LINK_GOOD (1 << 5)
+#define P1SR_PNTR_FLOW (1 << 4)
+#define P1SR_PNTR_100BT_FDX (1 << 3)
+#define P1SR_PNTR_100BT_HDX (1 << 2)
+#define P1SR_PNTR_10BT_FDX (1 << 1)
+#define P1SR_PNTR_10BT_HDX (1 << 0)
+
+#define ENUM_BUS_NONE 0
+#define ENUM_BUS_8BIT 1
+#define ENUM_BUS_16BIT 2
+#define ENUM_BUS_32BIT 3
+
+#define MAX_MCAST_LST 32
+#define HW_MCAST_SIZE 8
+#define MAC_ADDR_LEN 6
+
+/**
+ * union ks_tx_hdr - tx header data
+ * @txb: The header as bytes
+ * @txw: The header as 16bit, little-endian words
+ *
+ * A dual representation of the tx header data to allow
+ * access to individual bytes, and to allow 16bit accesses
+ * with 16bit alignment.
+ */
+union ks_tx_hdr {
+ u8 txb[4];
+ __le16 txw[2];
+};
+
+/**
+ * struct ks_net - KS8851 driver private data
+ * @net_device : The network device we're bound to
+ * @hw_addr : start address of data register.
+ * @hw_addr_cmd : start address of command register.
+ * @txh : temporaly buffer to save status/length.
+ * @lock : Lock to ensure that the device is not accessed when busy.
+ * @pdev : Pointer to platform device.
+ * @mii : The MII state information for the mii calls.
+ * @frame_head_info : frame header information for multi-pkt rx.
+ * @statelock : Lock on this structure for tx list.
+ * @msg_enable : The message flags controlling driver output (see ethtool).
+ * @frame_cnt : number of frames received.
+ * @bus_width : i/o bus width.
+ * @irq : irq number assigned to this device.
+ * @rc_rxqcr : Cached copy of KS_RXQCR.
+ * @rc_txcr : Cached copy of KS_TXCR.
+ * @rc_ier : Cached copy of KS_IER.
+ * @sharedbus : Multipex(addr and data bus) mode indicator.
+ * @cmd_reg_cache : command register cached.
+ * @cmd_reg_cache_int : command register cached. Used in the irq handler.
+ * @promiscuous : promiscuous mode indicator.
+ * @all_mcast : mutlicast indicator.
+ * @mcast_lst_size : size of multicast list.
+ * @mcast_lst : multicast list.
+ * @mcast_bits : multicast enabed.
+ * @mac_addr : MAC address assigned to this device.
+ * @fid : frame id.
+ * @extra_byte : number of extra byte prepended rx pkt.
+ * @enabled : indicator this device works.
+ *
+ * The @lock ensures that the chip is protected when certain operations are
+ * in progress. When the read or write packet transfer is in progress, most
+ * of the chip registers are not accessible until the transfer is finished and
+ * the DMA has been de-asserted.
+ *
+ * The @statelock is used to protect information in the structure which may
+ * need to be accessed via several sources, such as the network driver layer
+ * or one of the work queues.
+ *
+ */
+
+/* Receive multiplex framer header info */
+struct type_frame_head {
+ u16 sts; /* Frame status */
+ u16 len; /* Byte count */
+};
+
+struct ks_net {
+ struct net_device *netdev;
+ void __iomem *hw_addr;
+ void __iomem *hw_addr_cmd;
+ union ks_tx_hdr txh ____cacheline_aligned;
+ struct mutex lock; /* spinlock to be interrupt safe */
+ struct platform_device *pdev;
+ struct mii_if_info mii;
+ struct type_frame_head *frame_head_info;
+ spinlock_t statelock;
+ u32 msg_enable;
+ u32 frame_cnt;
+ int bus_width;
+ int irq;
+
+ u16 rc_rxqcr;
+ u16 rc_txcr;
+ u16 rc_ier;
+ u16 sharedbus;
+ u16 cmd_reg_cache;
+ u16 cmd_reg_cache_int;
+ u16 promiscuous;
+ u16 all_mcast;
+ u16 mcast_lst_size;
+ u8 mcast_lst[MAX_MCAST_LST][MAC_ADDR_LEN];
+ u8 mcast_bits[HW_MCAST_SIZE];
+ u8 mac_addr[6];
+ u8 fid;
+ u8 extra_byte;
+ u8 enabled;
+};
+
+static int msg_enable;
+
+#define ks_info(_ks, _msg...) dev_info(&(_ks)->pdev->dev, _msg)
+#define ks_warn(_ks, _msg...) dev_warn(&(_ks)->pdev->dev, _msg)
+#define ks_dbg(_ks, _msg...) dev_dbg(&(_ks)->pdev->dev, _msg)
+#define ks_err(_ks, _msg...) dev_err(&(_ks)->pdev->dev, _msg)
+
+#define BE3 0x8000 /* Byte Enable 3 */
+#define BE2 0x4000 /* Byte Enable 2 */
+#define BE1 0x2000 /* Byte Enable 1 */
+#define BE0 0x1000 /* Byte Enable 0 */
+
+/**
+ * register read/write calls.
+ *
+ * All these calls issue transactions to access the chip's registers. They
+ * all require that the necessary lock is held to prevent accesses when the
+ * chip is busy transfering packet data (RX/TX FIFO accesses).
+ */
+
+/**
+ * ks_rdreg8 - read 8 bit register from device
+ * @ks : The chip information
+ * @offset: The register address
+ *
+ * Read a 8bit register from the chip, returning the result
+ */
+static u8 ks_rdreg8(struct ks_net *ks, int offset)
+{
+ u16 data;
+ u8 shift_bit = offset & 0x03;
+ u8 shift_data = (offset & 1) << 3;
+ ks->cmd_reg_cache = (u16) offset | (u16)(BE0 << shift_bit);
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+ data = ioread16(ks->hw_addr);
+ return (u8)(data >> shift_data);
+}
+
+/**
+ * ks_rdreg16 - read 16 bit register from device
+ * @ks : The chip information
+ * @offset: The register address
+ *
+ * Read a 16bit register from the chip, returning the result
+ */
+
+static u16 ks_rdreg16(struct ks_net *ks, int offset)
+{
+ ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+ return ioread16(ks->hw_addr);
+}
+
+/**
+ * ks_wrreg8 - write 8bit register value to chip
+ * @ks: The chip information
+ * @offset: The register address
+ * @value: The value to write
+ *
+ */
+static void ks_wrreg8(struct ks_net *ks, int offset, u8 value)
+{
+ u8 shift_bit = (offset & 0x03);
+ u16 value_write = (u16)(value << ((offset & 1) << 3));
+ ks->cmd_reg_cache = (u16)offset | (BE0 << shift_bit);
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+ iowrite16(value_write, ks->hw_addr);
+}
+
+/**
+ * ks_wrreg16 - write 16bit register value to chip
+ * @ks: The chip information
+ * @offset: The register address
+ * @value: The value to write
+ *
+ */
+
+static void ks_wrreg16(struct ks_net *ks, int offset, u16 value)
+{
+ ks->cmd_reg_cache = (u16)offset | ((BE1 | BE0) << (offset & 0x02));
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+ iowrite16(value, ks->hw_addr);
+}
+
+/**
+ * ks_inblk - read a block of data from QMU. This is called after sudo DMA mode enabled.
+ * @ks: The chip state
+ * @wptr: buffer address to save data
+ * @len: length in byte to read
+ *
+ */
+static inline void ks_inblk(struct ks_net *ks, u16 *wptr, u32 len)
+{
+ len >>= 1;
+ while (len--)
+ *wptr++ = (u16)ioread16(ks->hw_addr);
+}
+
+/**
+ * ks_outblk - write data to QMU. This is called after sudo DMA mode enabled.
+ * @ks: The chip information
+ * @wptr: buffer address
+ * @len: length in byte to write
+ *
+ */
+static inline void ks_outblk(struct ks_net *ks, u16 *wptr, u32 len)
+{
+ len >>= 1;
+ while (len--)
+ iowrite16(*wptr++, ks->hw_addr);
+}
+
+/**
+ * ks_tx_fifo_space - return the available hardware buffer size.
+ * @ks: The chip information
+ *
+ */
+static inline u16 ks_tx_fifo_space(struct ks_net *ks)
+{
+ return ks_rdreg16(ks, KS_TXMIR) & 0x1fff;
+}
+
+/**
+ * ks_save_cmd_reg - save the command register from the cache.
+ * @ks: The chip information
+ *
+ */
+static inline void ks_save_cmd_reg(struct ks_net *ks)
+{
+ /*ks8851 MLL has a bug to read back the command register.
+ * So rely on software to save the content of command register.
+ */
+ ks->cmd_reg_cache_int = ks->cmd_reg_cache;
+}
+
+/**
+ * ks_restore_cmd_reg - restore the command register from the cache and
+ * write to hardware register.
+ * @ks: The chip information
+ *
+ */
+static inline void ks_restore_cmd_reg(struct ks_net *ks)
+{
+ ks->cmd_reg_cache = ks->cmd_reg_cache_int;
+ iowrite16(ks->cmd_reg_cache, ks->hw_addr_cmd);
+}
+
+/**
+ * ks_set_powermode - set power mode of the device
+ * @ks: The chip information
+ * @pwrmode: The power mode value to write to KS_PMECR.
+ *
+ * Change the power mode of the chip.
+ */
+static void ks_set_powermode(struct ks_net *ks, unsigned pwrmode)
+{
+ unsigned pmecr;
+
+ if (netif_msg_hw(ks))
+ ks_dbg(ks, "setting power mode %d\n", pwrmode);
+
+ ks_rdreg16(ks, KS_GRR);
+ pmecr = ks_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_PM_MASK;
+ pmecr |= pwrmode;
+
+ ks_wrreg16(ks, KS_PMECR, pmecr);
+}
+
+/**
+ * ks_read_config - read chip configuration of bus width.
+ * @ks: The chip information
+ *
+ */
+static void ks_read_config(struct ks_net *ks)
+{
+ u16 reg_data = 0;
+
+ /* Regardless of bus width, 8 bit read should always work.*/
+ reg_data = ks_rdreg8(ks, KS_CCR) & 0x00FF;
+ reg_data |= ks_rdreg8(ks, KS_CCR+1) << 8;
+
+ /* addr/data bus are multiplexed */
+ ks->sharedbus = (reg_data & CCR_SHARED) == CCR_SHARED;
+
+ /* There are garbage data when reading data from QMU,
+ depending on bus-width.
+ */
+
+ if (reg_data & CCR_8BIT) {
+ ks->bus_width = ENUM_BUS_8BIT;
+ ks->extra_byte = 1;
+ } else if (reg_data & CCR_16BIT) {
+ ks->bus_width = ENUM_BUS_16BIT;
+ ks->extra_byte = 2;
+ } else {
+ ks->bus_width = ENUM_BUS_32BIT;
+ ks->extra_byte = 4;
+ }
+}
+
+/**
+ * ks_soft_reset - issue one of the soft reset to the device
+ * @ks: The device state.
+ * @op: The bit(s) to set in the GRR
+ *
+ * Issue the relevant soft-reset command to the device's GRR register
+ * specified by @op.
+ *
+ * Note, the delays are in there as a caution to ensure that the reset
+ * has time to take effect and then complete. Since the datasheet does
+ * not currently specify the exact sequence, we have chosen something
+ * that seems to work with our device.
+ */
+static void ks_soft_reset(struct ks_net *ks, unsigned op)
+{
+ /* Disable interrupt first */
+ ks_wrreg16(ks, KS_IER, 0x0000);
+ ks_wrreg16(ks, KS_GRR, op);
+ mdelay(10); /* wait a short time to effect reset */
+ ks_wrreg16(ks, KS_GRR, 0);
+ mdelay(1); /* wait for condition to clear */
+}
+
+
+/**
+ * ks_read_qmu - read 1 pkt data from the QMU.
+ * @ks: The chip information
+ * @buf: buffer address to save 1 pkt
+ * @len: Pkt length
+ * Here is the sequence to read 1 pkt:
+ * 1. set sudo DMA mode
+ * 2. read prepend data
+ * 3. read pkt data
+ * 4. reset sudo DMA Mode
+ */
+static inline void ks_read_qmu(struct ks_net *ks, u16 *buf, u32 len)
+{
+ u32 r = ks->extra_byte & 0x1 ;
+ u32 w = ks->extra_byte - r;
+
+ /* 1. set sudo DMA mode */
+ ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
+ ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+
+ /* 2. read prepend data */
+ /**
+ * read 4 + extra bytes and discard them.
+ * extra bytes for dummy, 2 for status, 2 for len
+ */
+
+ /* use likely(r) for 8 bit access for performance */
+ if (unlikely(r))
+ ioread8(ks->hw_addr);
+ ks_inblk(ks, buf, w + 2 + 2);
+
+ /* 3. read pkt data */
+ ks_inblk(ks, buf, ALIGN(len, 4));
+
+ /* 4. reset sudo DMA Mode */
+ ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+}
+
+/**
+ * ks_rcv - read multiple pkts data from the QMU.
+ * @ks: The chip information
+ * @netdev: The network device being opened.
+ *
+ * Read all of header information before reading pkt content.
+ * It is not allowed only port of pkts in QMU after issuing
+ * interrupt ack.
+ */
+static void ks_rcv(struct ks_net *ks, struct net_device *netdev)
+{
+ u32 i;
+ struct type_frame_head *frame_hdr = ks->frame_head_info;
+ struct sk_buff *skb;
+
+ ks->frame_cnt = ks_rdreg16(ks, KS_RXFCTR) >> 8;
+
+ /* read all header information */
+ for (i = 0; i < ks->frame_cnt; i++) {
+ /* Checking Received packet status */
+ frame_hdr->sts = ks_rdreg16(ks, KS_RXFHSR);
+ /* Get packet len from hardware */
+ frame_hdr->len = ks_rdreg16(ks, KS_RXFHBCR);
+ frame_hdr++;
+ }
+
+ frame_hdr = ks->frame_head_info;
+ while (ks->frame_cnt--) {
+ skb = dev_alloc_skb(frame_hdr->len + 16);
+ if (likely(skb && (frame_hdr->sts & RXFSHR_RXFV) &&
+ (frame_hdr->len < RX_BUF_SIZE) && frame_hdr->len)) {
+ skb_reserve(skb, 2);
+ /* read data block including CRC 4 bytes */
+ ks_read_qmu(ks, (u16 *)skb->data, frame_hdr->len + 4);
+ skb_put(skb, frame_hdr->len);
+ skb->dev = netdev;
+ skb->protocol = eth_type_trans(skb, netdev);
+ netif_rx(skb);
+ } else {
+ printk(KERN_ERR "%s: err:skb alloc\n", __func__);
+ ks_wrreg16(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_RRXEF));
+ if (skb)
+ dev_kfree_skb_irq(skb);
+ }
+ frame_hdr++;
+ }
+}
+
+/**
+ * ks_update_link_status - link status update.
+ * @netdev: The network device being opened.
+ * @ks: The chip information
+ *
+ */
+
+static void ks_update_link_status(struct net_device *netdev, struct ks_net *ks)
+{
+ /* check the status of the link */
+ u32 link_up_status;
+ if (ks_rdreg16(ks, KS_P1SR) & P1SR_LINK_GOOD) {
+ netif_carrier_on(netdev);
+ link_up_status = true;
+ } else {
+ netif_carrier_off(netdev);
+ link_up_status = false;
+ }
+ if (netif_msg_link(ks))
+ ks_dbg(ks, "%s: %s\n",
+ __func__, link_up_status ? "UP" : "DOWN");
+}
+
+/**
+ * ks_irq - device interrupt handler
+ * @irq: Interrupt number passed from the IRQ hnalder.
+ * @pw: The private word passed to register_irq(), our struct ks_net.
+ *
+ * This is the handler invoked to find out what happened
+ *
+ * Read the interrupt status, work out what needs to be done and then clear
+ * any of the interrupts that are not needed.
+ */
+
+static irqreturn_t ks_irq(int irq, void *pw)
+{
+ struct ks_net *ks = pw;
+ struct net_device *netdev = ks->netdev;
+ u16 status;
+
+ /*this should be the first in IRQ handler */
+ ks_save_cmd_reg(ks);
+
+ status = ks_rdreg16(ks, KS_ISR);
+ if (unlikely(!status)) {
+ ks_restore_cmd_reg(ks);
+ return IRQ_NONE;
+ }
+
+ ks_wrreg16(ks, KS_ISR, status);
+
+ if (likely(status & IRQ_RXI))
+ ks_rcv(ks, netdev);
+
+ if (unlikely(status & IRQ_LCI))
+ ks_update_link_status(netdev, ks);
+
+ if (unlikely(status & IRQ_TXI))
+ netif_wake_queue(netdev);
+
+ if (unlikely(status & IRQ_LDI)) {
+
+ u16 pmecr = ks_rdreg16(ks, KS_PMECR);
+ pmecr &= ~PMECR_WKEVT_MASK;
+ ks_wrreg16(ks, KS_PMECR, pmecr | PMECR_WKEVT_LINK);
+ }
+
+ /* this should be the last in IRQ handler*/
+ ks_restore_cmd_reg(ks);
+ return IRQ_HANDLED;
+}
+
+
+/**
+ * ks_net_open - open network device
+ * @netdev: The network device being opened.
+ *
+ * Called when the network device is marked active, such as a user executing
+ * 'ifconfig up' on the device.
+ */
+static int ks_net_open(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ int err;
+
+#define KS_INT_FLAGS (IRQF_DISABLED|IRQF_TRIGGER_LOW)
+ /* lock the card, even if we may not actually do anything
+ * else at the moment.
+ */
+
+ if (netif_msg_ifup(ks))
+ ks_dbg(ks, "%s - entry\n", __func__);
+
+ /* reset the HW */
+ err = request_irq(ks->irq, ks_irq, KS_INT_FLAGS, DRV_NAME, ks);
+
+ if (err) {
+ printk(KERN_ERR "Failed to request IRQ: %d: %d\n",
+ ks->irq, err);
+ return err;
+ }
+
+ if (netif_msg_ifup(ks))
+ ks_dbg(ks, "network device %s up\n", netdev->name);
+
+ return 0;
+}
+
+/**
+ * ks_net_stop - close network device
+ * @netdev: The device being closed.
+ *
+ * Called to close down a network device which has been active. Cancell any
+ * work, shutdown the RX and TX process and then place the chip into a low
+ * power state whilst it is not being used.
+ */
+static int ks_net_stop(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+
+ if (netif_msg_ifdown(ks))
+ ks_info(ks, "%s: shutting down\n", netdev->name);
+
+ netif_stop_queue(netdev);
+
+ kfree(ks->frame_head_info);
+
+ mutex_lock(&ks->lock);
+
+ /* turn off the IRQs and ack any outstanding */
+ ks_wrreg16(ks, KS_IER, 0x0000);
+ ks_wrreg16(ks, KS_ISR, 0xffff);
+
+ /* shutdown RX process */
+ ks_wrreg16(ks, KS_RXCR1, 0x0000);
+
+ /* shutdown TX process */
+ ks_wrreg16(ks, KS_TXCR, 0x0000);
+
+ /* set powermode to soft power down to save power */
+ ks_set_powermode(ks, PMECR_PM_SOFTDOWN);
+ free_irq(ks->irq, netdev);
+ mutex_unlock(&ks->lock);
+ return 0;
+}
+
+
+/**
+ * ks_write_qmu - write 1 pkt data to the QMU.
+ * @ks: The chip information
+ * @pdata: buffer address to save 1 pkt
+ * @len: Pkt length in byte
+ * Here is the sequence to write 1 pkt:
+ * 1. set sudo DMA mode
+ * 2. write status/length
+ * 3. write pkt data
+ * 4. reset sudo DMA Mode
+ * 5. reset sudo DMA mode
+ * 6. Wait until pkt is out
+ */
+static void ks_write_qmu(struct ks_net *ks, u8 *pdata, u16 len)
+{
+ unsigned fid = ks->fid;
+
+ fid = ks->fid;
+ ks->fid = (ks->fid + 1) & TXFR_TXFID_MASK;
+
+ /* reduce the tx interrupt occurrances. */
+ if (!fid)
+ fid |= TXFR_TXIC; /* irq on completion */
+
+ /* start header at txb[0] to align txw entries */
+ ks->txh.txw[0] = cpu_to_le16(fid);
+ ks->txh.txw[1] = cpu_to_le16(len);
+
+ /* 1. set sudo-DMA mode */
+ ks_wrreg8(ks, KS_RXQCR, (ks->rc_rxqcr | RXQCR_SDA) & 0xff);
+ /* 2. write status/lenth info */
+ ks_outblk(ks, ks->txh.txw, 4);
+ /* 3. write pkt data */
+ ks_outblk(ks, (u16 *)pdata, ALIGN(len, 4));
+ /* 4. reset sudo-DMA mode */
+ ks_wrreg8(ks, KS_RXQCR, ks->rc_rxqcr);
+ /* 5. Enqueue Tx(move the pkt from TX buffer into TXQ) */
+ ks_wrreg16(ks, KS_TXQCR, TXQCR_METFE);
+ /* 6. wait until TXQCR_METFE is auto-cleared */
+ while (ks_rdreg16(ks, KS_TXQCR) & TXQCR_METFE)
+ ;
+}
+
+static void ks_disable_int(struct ks_net *ks)
+{
+ ks_wrreg16(ks, KS_IER, 0x0000);
+} /* ks_disable_int */
+
+static void ks_enable_int(struct ks_net *ks)
+{
+ ks_wrreg16(ks, KS_IER, ks->rc_ier);
+} /* ks_enable_int */
+
+/**
+ * ks_start_xmit - transmit packet
+ * @skb : The buffer to transmit
+ * @netdev : The device used to transmit the packet.
+ *
+ * Called by the network layer to transmit the @skb.
+ * spin_lock_irqsave is required because tx and rx should be mutual exclusive.
+ * So while tx is in-progress, prevent IRQ interrupt from happenning.
+ */
+static int ks_start_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ int retv = NETDEV_TX_OK;
+ struct ks_net *ks = netdev_priv(netdev);
+
+ disable_irq(netdev->irq);
+ ks_disable_int(ks);
+ spin_lock(&ks->statelock);
+
+ /* Extra space are required:
+ * 4 byte for alignment, 4 for status/length, 4 for CRC
+ */
+
+ if (likely(ks_tx_fifo_space(ks) >= skb->len + 12)) {
+ ks_write_qmu(ks, skb->data, skb->len);
+ dev_kfree_skb(skb);
+ } else
+ retv = NETDEV_TX_BUSY;
+ spin_unlock(&ks->statelock);
+ ks_enable_int(ks);
+ enable_irq(netdev->irq);
+ return retv;
+}
+
+/**
+ * ks_start_rx - ready to serve pkts
+ * @ks : The chip information
+ *
+ */
+static void ks_start_rx(struct ks_net *ks)
+{
+ u16 cntl;
+
+ /* Enables QMU Receive (RXCR1). */
+ cntl = ks_rdreg16(ks, KS_RXCR1);
+ cntl |= RXCR1_RXE ;
+ ks_wrreg16(ks, KS_RXCR1, cntl);
+} /* ks_start_rx */
+
+/**
+ * ks_stop_rx - stop to serve pkts
+ * @ks : The chip information
+ *
+ */
+static void ks_stop_rx(struct ks_net *ks)
+{
+ u16 cntl;
+
+ /* Disables QMU Receive (RXCR1). */
+ cntl = ks_rdreg16(ks, KS_RXCR1);
+ cntl &= ~RXCR1_RXE ;
+ ks_wrreg16(ks, KS_RXCR1, cntl);
+
+} /* ks_stop_rx */
+
+static unsigned long const ethernet_polynomial = 0x04c11db7U;
+
+static unsigned long ether_gen_crc(int length, u8 *data)
+{
+ long crc = -1;
+ while (--length >= 0) {
+ u8 current_octet = *data++;
+ int bit;
+
+ for (bit = 0; bit < 8; bit++, current_octet >>= 1) {
+ crc = (crc << 1) ^
+ ((crc < 0) ^ (current_octet & 1) ?
+ ethernet_polynomial : 0);
+ }
+ }
+ return (unsigned long)crc;
+} /* ether_gen_crc */
+
+/**
+* ks_set_grpaddr - set multicast information
+* @ks : The chip information
+*/
+
+static void ks_set_grpaddr(struct ks_net *ks)
+{
+ u8 i;
+ u32 index, position, value;
+
+ memset(ks->mcast_bits, 0, sizeof(u8) * HW_MCAST_SIZE);
+
+ for (i = 0; i < ks->mcast_lst_size; i++) {
+ position = (ether_gen_crc(6, ks->mcast_lst[i]) >> 26) & 0x3f;
+ index = position >> 3;
+ value = 1 << (position & 7);
+ ks->mcast_bits[index] |= (u8)value;
+ }
+
+ for (i = 0; i < HW_MCAST_SIZE; i++) {
+ if (i & 1) {
+ ks_wrreg16(ks, (u16)((KS_MAHTR0 + i) & ~1),
+ (ks->mcast_bits[i] << 8) |
+ ks->mcast_bits[i - 1]);
+ }
+ }
+} /* ks_set_grpaddr */
+
+/*
+* ks_clear_mcast - clear multicast information
+*
+* @ks : The chip information
+* This routine removes all mcast addresses set in the hardware.
+*/
+
+static void ks_clear_mcast(struct ks_net *ks)
+{
+ u16 i, mcast_size;
+ for (i = 0; i < HW_MCAST_SIZE; i++)
+ ks->mcast_bits[i] = 0;
+
+ mcast_size = HW_MCAST_SIZE >> 2;
+ for (i = 0; i < mcast_size; i++)
+ ks_wrreg16(ks, KS_MAHTR0 + (2*i), 0);
+}
+
+static void ks_set_promis(struct ks_net *ks, u16 promiscuous_mode)
+{
+ u16 cntl;
+ ks->promiscuous = promiscuous_mode;
+ ks_stop_rx(ks); /* Stop receiving for reconfiguration */
+ cntl = ks_rdreg16(ks, KS_RXCR1);
+
+ cntl &= ~RXCR1_FILTER_MASK;
+ if (promiscuous_mode)
+ /* Enable Promiscuous mode */
+ cntl |= RXCR1_RXAE | RXCR1_RXINVF;
+ else
+ /* Disable Promiscuous mode (default normal mode) */
+ cntl |= RXCR1_RXPAFMA;
+
+ ks_wrreg16(ks, KS_RXCR1, cntl);
+
+ if (ks->enabled)
+ ks_start_rx(ks);
+
+} /* ks_set_promis */
+
+static void ks_set_mcast(struct ks_net *ks, u16 mcast)
+{
+ u16 cntl;
+
+ ks->all_mcast = mcast;
+ ks_stop_rx(ks); /* Stop receiving for reconfiguration */
+ cntl = ks_rdreg16(ks, KS_RXCR1);
+ cntl &= ~RXCR1_FILTER_MASK;
+ if (mcast)
+ /* Enable "Perfect with Multicast address passed mode" */
+ cntl |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA);
+ else
+ /**
+ * Disable "Perfect with Multicast address passed
+ * mode" (normal mode).
+ */
+ cntl |= RXCR1_RXPAFMA;
+
+ ks_wrreg16(ks, KS_RXCR1, cntl);
+
+ if (ks->enabled)
+ ks_start_rx(ks);
+} /* ks_set_mcast */
+
+static void ks_set_rx_mode(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ struct dev_mc_list *ptr;
+
+ /* Turn on/off promiscuous mode. */
+ if ((netdev->flags & IFF_PROMISC) == IFF_PROMISC)
+ ks_set_promis(ks,
+ (u16)((netdev->flags & IFF_PROMISC) == IFF_PROMISC));
+ /* Turn on/off all mcast mode. */
+ else if ((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI)
+ ks_set_mcast(ks,
+ (u16)((netdev->flags & IFF_ALLMULTI) == IFF_ALLMULTI));
+ else
+ ks_set_promis(ks, false);
+
+ if ((netdev->flags & IFF_MULTICAST) && netdev->mc_count) {
+ if (netdev->mc_count <= MAX_MCAST_LST) {
+ int i = 0;
+ for (ptr = netdev->mc_list; ptr; ptr = ptr->next) {
+ if (!(*ptr->dmi_addr & 1))
+ continue;
+ if (i >= MAX_MCAST_LST)
+ break;
+ memcpy(ks->mcast_lst[i++], ptr->dmi_addr,
+ MAC_ADDR_LEN);
+ }
+ ks->mcast_lst_size = (u8)i;
+ ks_set_grpaddr(ks);
+ } else {
+ /**
+ * List too big to support so
+ * turn on all mcast mode.
+ */
+ ks->mcast_lst_size = MAX_MCAST_LST;
+ ks_set_mcast(ks, true);
+ }
+ } else {
+ ks->mcast_lst_size = 0;
+ ks_clear_mcast(ks);
+ }
+} /* ks_set_rx_mode */
+
+static void ks_set_mac(struct ks_net *ks, u8 *data)
+{
+ u16 *pw = (u16 *)data;
+ u16 w, u;
+
+ ks_stop_rx(ks); /* Stop receiving for reconfiguration */
+
+ u = *pw++;
+ w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+ ks_wrreg16(ks, KS_MARH, w);
+
+ u = *pw++;
+ w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+ ks_wrreg16(ks, KS_MARM, w);
+
+ u = *pw;
+ w = ((u & 0xFF) << 8) | ((u >> 8) & 0xFF);
+ ks_wrreg16(ks, KS_MARL, w);
+
+ memcpy(ks->mac_addr, data, 6);
+
+ if (ks->enabled)
+ ks_start_rx(ks);
+}
+
+static int ks_set_mac_address(struct net_device *netdev, void *paddr)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ struct sockaddr *addr = paddr;
+ u8 *da;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+ da = (u8 *)netdev->dev_addr;
+
+ ks_set_mac(ks, da);
+ return 0;
+}
+
+static int ks_net_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+
+ if (!netif_running(netdev))
+ return -EINVAL;
+
+ return generic_mii_ioctl(&ks->mii, if_mii(req), cmd, NULL);
+}
+
+static const struct net_device_ops ks_netdev_ops = {
+ .ndo_open = ks_net_open,
+ .ndo_stop = ks_net_stop,
+ .ndo_do_ioctl = ks_net_ioctl,
+ .ndo_start_xmit = ks_start_xmit,
+ .ndo_set_mac_address = ks_set_mac_address,
+ .ndo_set_rx_mode = ks_set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* ethtool support */
+
+static void ks_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *di)
+{
+ strlcpy(di->driver, DRV_NAME, sizeof(di->driver));
+ strlcpy(di->version, "1.00", sizeof(di->version));
+ strlcpy(di->bus_info, dev_name(netdev->dev.parent),
+ sizeof(di->bus_info));
+}
+
+static u32 ks_get_msglevel(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return ks->msg_enable;
+}
+
+static void ks_set_msglevel(struct net_device *netdev, u32 to)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ ks->msg_enable = to;
+}
+
+static int ks_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return mii_ethtool_gset(&ks->mii, cmd);
+}
+
+static int ks_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return mii_ethtool_sset(&ks->mii, cmd);
+}
+
+static u32 ks_get_link(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return mii_link_ok(&ks->mii);
+}
+
+static int ks_nway_reset(struct net_device *netdev)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ return mii_nway_restart(&ks->mii);
+}
+
+static const struct ethtool_ops ks_ethtool_ops = {
+ .get_drvinfo = ks_get_drvinfo,
+ .get_msglevel = ks_get_msglevel,
+ .set_msglevel = ks_set_msglevel,
+ .get_settings = ks_get_settings,
+ .set_settings = ks_set_settings,
+ .get_link = ks_get_link,
+ .nway_reset = ks_nway_reset,
+};
+
+/* MII interface controls */
+
+/**
+ * ks_phy_reg - convert MII register into a KS8851 register
+ * @reg: MII register number.
+ *
+ * Return the KS8851 register number for the corresponding MII PHY register
+ * if possible. Return zero if the MII register has no direct mapping to the
+ * KS8851 register set.
+ */
+static int ks_phy_reg(int reg)
+{
+ switch (reg) {
+ case MII_BMCR:
+ return KS_P1MBCR;
+ case MII_BMSR:
+ return KS_P1MBSR;
+ case MII_PHYSID1:
+ return KS_PHY1ILR;
+ case MII_PHYSID2:
+ return KS_PHY1IHR;
+ case MII_ADVERTISE:
+ return KS_P1ANAR;
+ case MII_LPA:
+ return KS_P1ANLPR;
+ }
+
+ return 0x0;
+}
+
+/**
+ * ks_phy_read - MII interface PHY register read.
+ * @netdev: The network device the PHY is on.
+ * @phy_addr: Address of PHY (ignored as we only have one)
+ * @reg: The register to read.
+ *
+ * This call reads data from the PHY register specified in @reg. Since the
+ * device does not support all the MII registers, the non-existant values
+ * are always returned as zero.
+ *
+ * We return zero for unsupported registers as the MII code does not check
+ * the value returned for any error status, and simply returns it to the
+ * caller. The mii-tool that the driver was tested with takes any -ve error
+ * as real PHY capabilities, thus displaying incorrect data to the user.
+ */
+static int ks_phy_read(struct net_device *netdev, int phy_addr, int reg)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ int ksreg;
+ int result;
+
+ ksreg = ks_phy_reg(reg);
+ if (!ksreg)
+ return 0x0; /* no error return allowed, so use zero */
+
+ mutex_lock(&ks->lock);
+ result = ks_rdreg16(ks, ksreg);
+ mutex_unlock(&ks->lock);
+
+ return result;
+}
+
+static void ks_phy_write(struct net_device *netdev,
+ int phy, int reg, int value)
+{
+ struct ks_net *ks = netdev_priv(netdev);
+ int ksreg;
+
+ ksreg = ks_phy_reg(reg);
+ if (ksreg) {
+ mutex_lock(&ks->lock);
+ ks_wrreg16(ks, ksreg, value);
+ mutex_unlock(&ks->lock);
+ }
+}
+
+/**
+ * ks_read_selftest - read the selftest memory info.
+ * @ks: The device state
+ *
+ * Read and check the TX/RX memory selftest information.
+ */
+static int ks_read_selftest(struct ks_net *ks)
+{
+ unsigned both_done = MBIR_TXMBF | MBIR_RXMBF;
+ int ret = 0;
+ unsigned rd;
+
+ rd = ks_rdreg16(ks, KS_MBIR);
+
+ if ((rd & both_done) != both_done) {
+ ks_warn(ks, "Memory selftest not finished\n");
+ return 0;
+ }
+
+ if (rd & MBIR_TXMBFA) {
+ ks_err(ks, "TX memory selftest fails\n");
+ ret |= 1;
+ }
+
+ if (rd & MBIR_RXMBFA) {
+ ks_err(ks, "RX memory selftest fails\n");
+ ret |= 2;
+ }
+
+ ks_info(ks, "the selftest passes\n");
+ return ret;
+}
+
+static void ks_disable(struct ks_net *ks)
+{
+ u16 w;
+
+ w = ks_rdreg16(ks, KS_TXCR);
+
+ /* Disables QMU Transmit (TXCR). */
+ w &= ~TXCR_TXE;
+ ks_wrreg16(ks, KS_TXCR, w);
+
+ /* Disables QMU Receive (RXCR1). */
+ w = ks_rdreg16(ks, KS_RXCR1);
+ w &= ~RXCR1_RXE ;
+ ks_wrreg16(ks, KS_RXCR1, w);
+
+ ks->enabled = false;
+
+} /* ks_disable */
+
+static void ks_setup(struct ks_net *ks)
+{
+ u16 w;
+
+ /**
+ * Configure QMU Transmit
+ */
+
+ /* Setup Transmit Frame Data Pointer Auto-Increment (TXFDPR) */
+ ks_wrreg16(ks, KS_TXFDPR, TXFDPR_TXFPAI);
+
+ /* Setup Receive Frame Data Pointer Auto-Increment */
+ ks_wrreg16(ks, KS_RXFDPR, RXFDPR_RXFPAI);
+
+ /* Setup Receive Frame Threshold - 1 frame (RXFCTFC) */
+ ks_wrreg16(ks, KS_RXFCTR, 1 & RXFCTR_THRESHOLD_MASK);
+
+ /* Setup RxQ Command Control (RXQCR) */
+ ks->rc_rxqcr = RXQCR_CMD_CNTL;
+ ks_wrreg16(ks, KS_RXQCR, ks->rc_rxqcr);
+
+ /**
+ * set the force mode to half duplex, default is full duplex
+ * because if the auto-negotiation fails, most switch uses
+ * half-duplex.
+ */
+
+ w = ks_rdreg16(ks, KS_P1MBCR);
+ w &= ~P1MBCR_FORCE_FDX;
+ ks_wrreg16(ks, KS_P1MBCR, w);
+
+ w = TXCR_TXFCE | TXCR_TXPE | TXCR_TXCRC | TXCR_TCGIP;
+ ks_wrreg16(ks, KS_TXCR, w);
+
+ w = RXCR1_RXFCE | RXCR1_RXBE | RXCR1_RXUE;
+
+ if (ks->promiscuous) /* bPromiscuous */
+ w |= (RXCR1_RXAE | RXCR1_RXINVF);
+ else if (ks->all_mcast) /* Multicast address passed mode */
+ w |= (RXCR1_RXAE | RXCR1_RXMAFMA | RXCR1_RXPAFMA);
+ else /* Normal mode */
+ w |= RXCR1_RXPAFMA;
+
+ ks_wrreg16(ks, KS_RXCR1, w);
+} /*ks_setup */
+
+
+static void ks_setup_int(struct ks_net *ks)
+{
+ ks->rc_ier = 0x00;
+ /* Clear the interrupts status of the hardware. */
+ ks_wrreg16(ks, KS_ISR, 0xffff);
+
+ /* Enables the interrupts of the hardware. */
+ ks->rc_ier = (IRQ_LCI | IRQ_TXI | IRQ_RXI);
+} /* ks_setup_int */
+
+void ks_enable(struct ks_net *ks)
+{
+ u16 w;
+
+ w = ks_rdreg16(ks, KS_TXCR);
+ /* Enables QMU Transmit (TXCR). */
+ ks_wrreg16(ks, KS_TXCR, w | TXCR_TXE);
+
+ /*
+ * RX Frame Count Threshold Enable and Auto-Dequeue RXQ Frame
+ * Enable
+ */
+
+ w = ks_rdreg16(ks, KS_RXQCR);
+ ks_wrreg16(ks, KS_RXQCR, w | RXQCR_RXFCTE);
+
+ /* Enables QMU Receive (RXCR1). */
+ w = ks_rdreg16(ks, KS_RXCR1);
+ ks_wrreg16(ks, KS_RXCR1, w | RXCR1_RXE);
+ ks->enabled = true;
+} /* ks_enable */
+
+static int ks_hw_init(struct ks_net *ks)
+{
+#define MHEADER_SIZE (sizeof(struct type_frame_head) * MAX_RECV_FRAMES)
+ ks->promiscuous = 0;
+ ks->all_mcast = 0;
+ ks->mcast_lst_size = 0;
+
+ ks->frame_head_info = (struct type_frame_head *) \
+ kmalloc(MHEADER_SIZE, GFP_KERNEL);
+ if (!ks->frame_head_info) {
+ printk(KERN_ERR "Error: Fail to allocate frame memory\n");
+ return false;
+ }
+
+ ks_set_mac(ks, KS_DEFAULT_MAC_ADDRESS);
+ return true;
+}
+
+
+static int __devinit ks8851_probe(struct platform_device *pdev)
+{
+ int err = -ENOMEM;
+ struct resource *io_d, *io_c;
+ struct net_device *netdev;
+ struct ks_net *ks;
+ u16 id, data;
+
+ io_d = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ io_c = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+
+ if (!request_mem_region(io_d->start, resource_size(io_d), DRV_NAME))
+ goto err_mem_region;
+
+ if (!request_mem_region(io_c->start, resource_size(io_c), DRV_NAME))
+ goto err_mem_region1;
+
+ netdev = alloc_etherdev(sizeof(struct ks_net));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ ks = netdev_priv(netdev);
+ ks->netdev = netdev;
+ ks->hw_addr = ioremap(io_d->start, resource_size(io_d));
+
+ if (!ks->hw_addr)
+ goto err_ioremap;
+
+ ks->hw_addr_cmd = ioremap(io_c->start, resource_size(io_c));
+ if (!ks->hw_addr_cmd)
+ goto err_ioremap1;
+
+ ks->irq = platform_get_irq(pdev, 0);
+
+ if (ks->irq < 0) {
+ err = ks->irq;
+ goto err_get_irq;
+ }
+
+ ks->pdev = pdev;
+
+ mutex_init(&ks->lock);
+ spin_lock_init(&ks->statelock);
+
+ netdev->netdev_ops = &ks_netdev_ops;
+ netdev->ethtool_ops = &ks_ethtool_ops;
+
+ /* setup mii state */
+ ks->mii.dev = netdev;
+ ks->mii.phy_id = 1,
+ ks->mii.phy_id_mask = 1;
+ ks->mii.reg_num_mask = 0xf;
+ ks->mii.mdio_read = ks_phy_read;
+ ks->mii.mdio_write = ks_phy_write;
+
+ ks_info(ks, "message enable is %d\n", msg_enable);
+ /* set the default message enable */
+ ks->msg_enable = netif_msg_init(msg_enable, (NETIF_MSG_DRV |
+ NETIF_MSG_PROBE |
+ NETIF_MSG_LINK));
+ ks_read_config(ks);
+
+ /* simple check for a valid chip being connected to the bus */
+ if ((ks_rdreg16(ks, KS_CIDER) & ~CIDER_REV_MASK) != CIDER_ID) {
+ ks_err(ks, "failed to read device ID\n");
+ err = -ENODEV;
+ goto err_register;
+ }
+
+ if (ks_read_selftest(ks)) {
+ ks_err(ks, "failed to read device ID\n");
+ err = -ENODEV;
+ goto err_register;
+ }
+
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ platform_set_drvdata(pdev, netdev);
+
+ ks_soft_reset(ks, GRR_GSR);
+ ks_hw_init(ks);
+ ks_disable(ks);
+ ks_setup(ks);
+ ks_setup_int(ks);
+ ks_enable_int(ks);
+ ks_enable(ks);
+ memcpy(netdev->dev_addr, ks->mac_addr, 6);
+
+ data = ks_rdreg16(ks, KS_OBCR);
+ ks_wrreg16(ks, KS_OBCR, data | OBCR_ODS_16MA);
+
+ /**
+ * If you want to use the default MAC addr,
+ * comment out the 2 functions below.
+ */
+
+ random_ether_addr(netdev->dev_addr);
+ ks_set_mac(ks, netdev->dev_addr);
+
+ id = ks_rdreg16(ks, KS_CIDER);
+
+ printk(KERN_INFO DRV_NAME
+ " Found chip, family: 0x%x, id: 0x%x, rev: 0x%x\n",
+ (id >> 8) & 0xff, (id >> 4) & 0xf, (id >> 1) & 0x7);
+ return 0;
+
+err_register:
+err_get_irq:
+ iounmap(ks->hw_addr_cmd);
+err_ioremap1:
+ iounmap(ks->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ release_mem_region(io_c->start, resource_size(io_c));
+err_mem_region1:
+ release_mem_region(io_d->start, resource_size(io_d));
+err_mem_region:
+ return err;
+}
+
+static int __devexit ks8851_remove(struct platform_device *pdev)
+{
+ struct net_device *netdev = platform_get_drvdata(pdev);
+ struct ks_net *ks = netdev_priv(netdev);
+ struct resource *iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ unregister_netdev(netdev);
+ iounmap(ks->hw_addr);
+ free_netdev(netdev);
+ release_mem_region(iomem->start, resource_size(iomem));
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+
+}
+
+static struct platform_driver ks8851_platform_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = ks8851_probe,
+ .remove = __devexit_p(ks8851_remove),
+};
+
+static int __init ks8851_init(void)
+{
+ return platform_driver_register(&ks8851_platform_driver);
+}
+
+static void __exit ks8851_exit(void)
+{
+ platform_driver_unregister(&ks8851_platform_driver);
+}
+
+module_init(ks8851_init);
+module_exit(ks8851_exit);
+
+MODULE_DESCRIPTION("KS8851 MLL Network driver");
+MODULE_AUTHOR("David Choi <david.choi@micrel.com>");
+MODULE_LICENSE("GPL");
+module_param_named(message, msg_enable, int, 0);
+MODULE_PARM_DESC(message, "Message verbosity level (0=none, 31=all)");
+
static struct platform_driver meth_driver = {
.probe = meth_probe,
- .remove = __devexit_p(meth_remove),
+ .remove = __exit_p(meth_remove),
.driver = {
.name = "meth",
.owner = THIS_MODULE,
*/
#include <linux/mlx4/cmd.h>
+#include <linux/cache.h>
#include "fw.h"
#include "icm.h"
#define INIT_HCA_IN_SIZE 0x200
#define INIT_HCA_VERSION_OFFSET 0x000
#define INIT_HCA_VERSION 2
+#define INIT_HCA_CACHELINE_SZ_OFFSET 0x0e
#define INIT_HCA_FLAGS_OFFSET 0x014
#define INIT_HCA_QPC_OFFSET 0x020
#define INIT_HCA_QPC_BASE_OFFSET (INIT_HCA_QPC_OFFSET + 0x10)
*((u8 *) mailbox->buf + INIT_HCA_VERSION_OFFSET) = INIT_HCA_VERSION;
+ *((u8 *) mailbox->buf + INIT_HCA_CACHELINE_SZ_OFFSET) =
+ (ilog2(cache_line_size()) - 4) << 5;
+
#if defined(__LITTLE_ENDIAN)
*(inbox + INIT_HCA_FLAGS_OFFSET / 4) &= ~cpu_to_be32(1 << 1);
#elif defined(__BIG_ENDIAN)
{ PCI_VDEVICE(MELLANOX, 0x6372) }, /* MT25458 ConnectX EN 10GBASE-T 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x675a) }, /* MT25458 ConnectX EN 10GBASE-T+Gen2 10GigE */
{ PCI_VDEVICE(MELLANOX, 0x6764) }, /* MT26468 ConnectX EN 10GigE PCIe gen2*/
+ { PCI_VDEVICE(MELLANOX, 0x6746) }, /* MT26438 ConnectX EN 40GigE PCIe gen2 5GT/s */
+ { PCI_VDEVICE(MELLANOX, 0x676e) }, /* MT26478 ConnectX2 40GigE PCIe gen2 */
{ 0, }
};
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.5.0-1.432"
+#define MYRI10GE_VERSION_STR "1.5.1-1.451"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
return 0;
}
}
- if (*ptr == 'R' || *ptr == 'Q') {
- /* We've found either an XFP or quad ribbon fiber */
+ if (*ptr == '2')
+ ptr++;
+ if (*ptr == 'R' || *ptr == 'Q' || *ptr == 'S') {
+ /* We've found either an XFP, quad ribbon fiber, or SFP+ */
cmd->port = PORT_FIBRE;
+ cmd->supported |= SUPPORTED_FIBRE;
+ cmd->advertising |= ADVERTISED_FIBRE;
+ } else {
+ cmd->port = PORT_OTHER;
}
+ if (*ptr == 'R' || *ptr == 'S')
+ cmd->transceiver = XCVR_EXTERNAL;
+ else
+ cmd->transceiver = XCVR_INTERNAL;
+
return 0;
}
#define NETXEN_CRB_ROMUSB \
NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_ROMUSB)
#define NETXEN_CRB_I2Q NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2Q)
+#define NETXEN_CRB_I2C0 NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_I2C0)
#define NETXEN_CRB_SMB NETXEN_PCI_CRB_WINDOW(NETXEN_HW_PX_MAP_CRB_SMB)
#define NETXEN_CRB_MAX NETXEN_PCI_CRB_WINDOW(64)
int netxen_nic_get_board_info(struct netxen_adapter *adapter)
{
- int offset, board_type, magic, header_version;
+ int offset, board_type, magic;
struct pci_dev *pdev = adapter->pdev;
offset = NX_FW_MAGIC_OFFSET;
if (netxen_rom_fast_read(adapter, offset, &magic))
return -EIO;
- offset = NX_HDR_VERSION_OFFSET;
- if (netxen_rom_fast_read(adapter, offset, &header_version))
- return -EIO;
-
- if (magic != NETXEN_BDINFO_MAGIC ||
- header_version != NETXEN_BDINFO_VERSION) {
- dev_err(&pdev->dev,
- "invalid board config, magic=%08x, version=%08x\n",
- magic, header_version);
+ if (magic != NETXEN_BDINFO_MAGIC) {
+ dev_err(&pdev->dev, "invalid board config, magic=%08x\n",
+ magic);
return -EIO;
}
continue;
if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+ if (off == (NETXEN_CRB_I2C0 + 0x1c))
+ continue;
/* do not reset PCI */
if (off == (ROMUSB_GLB + 0xbc))
continue;
continue;
}
- if (off == NETXEN_ADDR_ERROR) {
- printk(KERN_ERR "%s: Err: Unknown addr: 0x%08x\n",
- netxen_nic_driver_name, buf[i].addr);
- continue;
- }
-
init_delay = 1;
/* After writing this register, HW needs time for CRB */
/* to quiet down (else crb_window returns 0xffffffff) */
void __iomem *mem_ptr2 = NULL;
void __iomem *db_ptr = NULL;
- unsigned long mem_base, mem_len, db_base, db_len = 0, pci_len0 = 0;
+ resource_size_t mem_base, db_base;
+ unsigned long mem_len, db_len = 0, pci_len0 = 0;
struct pci_dev *pdev = adapter->pdev;
int pci_func = adapter->ahw.pci_func;
}
netxen_schedule_work(adapter, netxen_fw_poll_work, FW_POLL_DELAY);
+ return 0;
err_out_detach:
netxen_nic_detach(adapter);
/* 4 fragments per cmd des */
no_of_desc = (frag_count + 3) >> 2;
- if (unlikely(no_of_desc + 2) > netxen_tx_avail(tx_ring)) {
+ if (unlikely(no_of_desc + 2 > netxen_tx_avail(tx_ring))) {
netif_stop_queue(netdev);
return NETDEV_TX_BUSY;
}
netif_wake_queue(adapter->netdev);
- goto done;
+ clear_bit(__NX_RESETTING, &adapter->state);
} else {
+ clear_bit(__NX_RESETTING, &adapter->state);
if (!netxen_nic_reset_context(adapter)) {
adapter->netdev->trans_start = jiffies;
- goto done;
+ return;
}
/* context reset failed, fall through for fw reset */
request_reset:
adapter->need_fw_reset = 1;
-done:
clear_bit(__NX_RESETTING, &adapter->state);
}
rp->rcr_index = index;
skb_reserve(skb, NET_IP_ALIGN);
- __pskb_pull_tail(skb, min(len, NIU_RXPULL_MAX));
+ __pskb_pull_tail(skb, min(len, VLAN_ETH_HLEN));
rp->rx_packets++;
rp->rx_bytes += skb->len;
#include <linux/compiler.h>
#include <linux/prefetch.h>
#include <linux/ethtool.h>
+#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/if_vlan.h>
#include <linux/rtnetlink.h>
struct pasemi_mac *mac = netdev_priv(netdev);
struct phy_device *phydev = mac->phydev;
+ if (!phydev)
+ return -EOPNOTSUPP;
+
return phy_ethtool_gset(phydev, cmd);
}
static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
static const struct ethtool_ops netdev_ethtool_ops;
static void set_rx_mode(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
static void tc574_detach(struct pcmcia_device *p_dev);
.ndo_tx_timeout = el3_tx_timeout,
.ndo_get_stats = el3_get_stats,
.ndo_do_ioctl = el3_ioctl,
- .ndo_set_multicast_list = set_rx_mode,
+ .ndo_set_multicast_list = set_multicast_list,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
}
+static void set_multicast_list(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->window_lock, flags);
+ set_rx_mode(dev);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+}
+
static int el3_close(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
base = &virt[hw_info[i].offset & (req.Size-1)];
if ((readb(base+0) == hw_info[i].a0) &&
(readb(base+2) == hw_info[i].a1) &&
- (readb(base+4) == hw_info[i].a2))
- break;
- }
- if (i < NR_INFO) {
- for (j = 0; j < 6; j++)
- dev->dev_addr[j] = readb(base + (j<<1));
+ (readb(base+4) == hw_info[i].a2)) {
+ for (j = 0; j < 6; j++)
+ dev->dev_addr[j] = readb(base + (j<<1));
+ break;
+ }
}
iounmap(virt);
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(0, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
- PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
- PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
- PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_PROD_ID12(0, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_PROD_ID4(0, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0175, 0x0000, "cis/DP83903.cis"),
PCMCIA_DEVICE_CIS_MANF_CARD(0xc00f, 0x0002, "cis/LA-PCM.cis"),
PCMCIA_DEVICE_CIS_PROD_ID12("KTI", "PE520 PLUS", 0xad180345, 0x9d58d392, "PE520.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "NE2K.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "PE-200.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "tamarack.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("NDC", "Ethernet", 0x01c43ae1, 0x00b2e941, "cis/NE2K.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("PMX ", "PE-200", 0x34f3f1c8, 0x10b59f8c, "cis/PE-200.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("TAMARACK", "Ethernet", 0xcf434fba, 0x00b2e941, "cis/tamarack.cis"),
PCMCIA_DEVICE_PROD_ID12("Ethernet", "CF Size PC Card", 0x00b2e941, 0x43ac239b),
PCMCIA_DEVICE_PROD_ID123("Fast Ethernet", "CF Size PC Card", "1.0",
0xb4be14e3, 0x43ac239b, 0x0877b627),
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/ioport.h>
},
{},
};
+MODULE_DEVICE_TABLE(of, mdio_ofgpio_match);
static struct of_platform_driver mdio_ofgpio_driver = {
.name = "mdio-gpio",
rwlock_t hash_lock;
};
-/* to eliminate a race btw pppoe_flush_dev and pppoe_release */
-static DEFINE_SPINLOCK(flush_lock);
-
/*
* PPPoE could be in the following stages:
* 1) Discovery stage (to obtain remote MAC and Session ID)
write_lock_bh(&pn->hash_lock);
for (i = 0; i < PPPOE_HASH_SIZE; i++) {
struct pppox_sock *po = pn->hash_table[i];
+ struct sock *sk;
- while (po != NULL) {
- struct sock *sk;
- if (po->pppoe_dev != dev) {
+ while (po) {
+ while (po && po->pppoe_dev != dev) {
po = po->next;
- continue;
}
+
+ if (!po)
+ break;
+
sk = sk_pppox(po);
- spin_lock(&flush_lock);
- po->pppoe_dev = NULL;
- spin_unlock(&flush_lock);
- dev_put(dev);
/* We always grab the socket lock, followed by the
- * hash_lock, in that order. Since we should
- * hold the sock lock while doing any unbinding,
- * we need to release the lock we're holding.
- * Hold a reference to the sock so it doesn't disappear
- * as we're jumping between locks.
+ * hash_lock, in that order. Since we should hold the
+ * sock lock while doing any unbinding, we need to
+ * release the lock we're holding. Hold a reference to
+ * the sock so it doesn't disappear as we're jumping
+ * between locks.
*/
sock_hold(sk);
-
write_unlock_bh(&pn->hash_lock);
lock_sock(sk);
- if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+ if (po->pppoe_dev == dev
+ && sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
pppox_unbind_sock(sk);
sk->sk_state = PPPOX_ZOMBIE;
sk->sk_state_change(sk);
+ po->pppoe_dev = NULL;
+ dev_put(dev);
}
release_sock(sk);
sock_put(sk);
- /* Restart scan at the beginning of this hash chain.
- * While the lock was dropped the chain contents may
- * have changed.
+ /* Restart the process from the start of the current
+ * hash chain. We dropped locks so the world may have
+ * change from underneath us.
*/
+
+ BUG_ON(pppoe_pernet(dev_net(dev)) == NULL);
write_lock_bh(&pn->hash_lock);
po = pn->hash_table[i];
}
struct pppox_sock *po = pppox_sk(sk);
struct pppox_sock *relay_po;
+ /* Backlog receive. Semantics of backlog rcv preclude any code from
+ * executing in lock_sock()/release_sock() bounds; meaning sk->sk_state
+ * can't change.
+ */
+
if (sk->sk_state & PPPOX_BOUND) {
ppp_input(&po->chan, skb);
} else if (sk->sk_state & PPPOX_RELAY) {
- relay_po = get_item_by_addr(dev_net(po->pppoe_dev),
- &po->pppoe_relay);
+ relay_po = get_item_by_addr(sock_net(sk),
+ &po->pppoe_relay);
if (relay_po == NULL)
goto abort_kfree;
goto drop;
pn = pppoe_pernet(dev_net(dev));
+
+ /* Note that get_item does a sock_hold(), so sk_pppox(po)
+ * is known to be safe.
+ */
po = get_item(pn, ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
if (!po)
goto drop;
struct sock *sk = sock->sk;
struct pppox_sock *po;
struct pppoe_net *pn;
+ struct net *net = NULL;
if (!sk)
return 0;
return -EBADF;
}
+ po = pppox_sk(sk);
+
+ if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+ dev_put(po->pppoe_dev);
+ po->pppoe_dev = NULL;
+ }
+
pppox_unbind_sock(sk);
/* Signal the death of the socket. */
sk->sk_state = PPPOX_DEAD;
- /*
- * pppoe_flush_dev could lead to a race with
- * this routine so we use flush_lock to eliminate
- * such a case (we only need per-net specific data)
- */
- spin_lock(&flush_lock);
- po = pppox_sk(sk);
- if (!po->pppoe_dev) {
- spin_unlock(&flush_lock);
- goto out;
- }
- pn = pppoe_pernet(dev_net(po->pppoe_dev));
- spin_unlock(&flush_lock);
+ net = sock_net(sk);
+ pn = pppoe_pernet(net);
/*
* protect "po" from concurrent updates
* on pppoe_flush_dev
*/
- write_lock_bh(&pn->hash_lock);
+ delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote,
+ po->pppoe_ifindex);
- po = pppox_sk(sk);
- if (stage_session(po->pppoe_pa.sid))
- __delete_item(pn, po->pppoe_pa.sid, po->pppoe_pa.remote,
- po->pppoe_ifindex);
-
- if (po->pppoe_dev) {
- dev_put(po->pppoe_dev);
- po->pppoe_dev = NULL;
- }
-
- write_unlock_bh(&pn->hash_lock);
-
-out:
sock_orphan(sk);
sock->sk = NULL;
struct sock *sk = sock->sk;
struct sockaddr_pppox *sp = (struct sockaddr_pppox *)uservaddr;
struct pppox_sock *po = pppox_sk(sk);
- struct net_device *dev;
+ struct net_device *dev = NULL;
struct pppoe_net *pn;
+ struct net *net = NULL;
int error;
lock_sock(sk);
/* Delete the old binding */
if (stage_session(po->pppoe_pa.sid)) {
pppox_unbind_sock(sk);
+ pn = pppoe_pernet(sock_net(sk));
+ delete_item(pn, po->pppoe_pa.sid,
+ po->pppoe_pa.remote, po->pppoe_ifindex);
if (po->pppoe_dev) {
- pn = pppoe_pernet(dev_net(po->pppoe_dev));
- delete_item(pn, po->pppoe_pa.sid,
- po->pppoe_pa.remote, po->pppoe_ifindex);
dev_put(po->pppoe_dev);
+ po->pppoe_dev = NULL;
}
+
memset(sk_pppox(po) + 1, 0,
sizeof(struct pppox_sock) - sizeof(struct sock));
sk->sk_state = PPPOX_NONE;
/* Re-bind in session stage only */
if (stage_session(sp->sa_addr.pppoe.sid)) {
error = -ENODEV;
- dev = dev_get_by_name(sock_net(sk), sp->sa_addr.pppoe.dev);
+ net = sock_net(sk);
+ dev = dev_get_by_name(net, sp->sa_addr.pppoe.dev);
if (!dev)
- goto end;
+ goto err_put;
po->pppoe_dev = dev;
po->pppoe_ifindex = dev->ifindex;
- pn = pppoe_pernet(dev_net(dev));
- write_lock_bh(&pn->hash_lock);
+ pn = pppoe_pernet(net);
if (!(dev->flags & IFF_UP)) {
- write_unlock_bh(&pn->hash_lock);
goto err_put;
}
&sp->sa_addr.pppoe,
sizeof(struct pppoe_addr));
+ write_lock_bh(&pn->hash_lock);
error = __set_item(pn, po);
write_unlock_bh(&pn->hash_lock);
if (error < 0)
po->chan.ops = &pppoe_chan_ops;
error = ppp_register_net_channel(dev_net(dev), &po->chan);
- if (error)
+ if (error) {
+ delete_item(pn, po->pppoe_pa.sid,
+ po->pppoe_pa.remote, po->pppoe_ifindex);
goto err_put;
+ }
sk->sk_state = PPPOX_CONNECTED;
}
struct pppoe_hdr *ph;
int data_len = skb->len;
+ /* The higher-level PPP code (ppp_unregister_channel()) ensures the PPP
+ * xmit operations conclude prior to an unregistration call. Thus
+ * sk->sk_state cannot change, so we don't need to do lock_sock().
+ * But, we also can't do a lock_sock since that introduces a potential
+ * deadlock as we'd reverse the lock ordering used when calling
+ * ppp_unregister_channel().
+ */
+
if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
goto abort;
po->pppoe_pa.remote, NULL, data_len);
dev_queue_xmit(skb);
-
return 1;
abort:
* session or the special tunnel type.
*/
static int pppol2tp_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct pppol2tp_session *session = sk->sk_user_data;
#include <linux/pci.h>
#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
/*
* General definitions...
/* Misc. stuff */
MAILBOX_COUNT = 16,
+ MAILBOX_TIMEOUT = 5,
PROC_ADDR_RDY = (1 << 31),
PROC_ADDR_R = (1 << 30),
RST_FO_TFO = (1 << 0),
RST_FO_RR_MASK = 0x00060000,
RST_FO_RR_CQ_CAM = 0x00000000,
- RST_FO_RR_DROP = 0x00000001,
- RST_FO_RR_DQ = 0x00000002,
- RST_FO_RR_RCV_FUNC_CQ = 0x00000003,
+ RST_FO_RR_DROP = 0x00000002,
+ RST_FO_RR_DQ = 0x00000004,
+ RST_FO_RR_RCV_FUNC_CQ = 0x00000006,
RST_FO_FRB = (1 << 12),
RST_FO_MOP = (1 << 13),
RST_FO_REG = (1 << 14),
MB_CMD_SET_PORT_CFG = 0x00000122,
MB_CMD_GET_PORT_CFG = 0x00000123,
MB_CMD_GET_LINK_STS = 0x00000124,
+ MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */
+ MB_SET_MPI_TFK_STOP = (1 << 0),
+ MB_SET_MPI_TFK_RESUME = (1 << 1),
+ MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */
+ MB_GET_MPI_TFK_STOPPED = (1 << 0),
+ MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1),
/* Mailbox Command Status. */
MB_CMD_STS_GOOD = 0x00004000, /* Success. */
#define RSS_RI6 0x40
#define RSS_RT6 0x80
__le16 mask;
- __le32 hash_cq_id[256];
+ u8 hash_cq_id[1024];
__le32 ipv6_hash_key[10];
__le32 ipv4_hash_key[4];
} __attribute((packed));
/* adapter flags definitions. */
enum {
- QL_ADAPTER_UP = (1 << 0), /* Adapter has been brought up. */
- QL_LEGACY_ENABLED = (1 << 3),
- QL_MSI_ENABLED = (1 << 3),
- QL_MSIX_ENABLED = (1 << 4),
- QL_DMA64 = (1 << 5),
- QL_PROMISCUOUS = (1 << 6),
- QL_ALLMULTI = (1 << 7),
- QL_PORT_CFG = (1 << 8),
- QL_CAM_RT_SET = (1 << 9),
+ QL_ADAPTER_UP = 0, /* Adapter has been brought up. */
+ QL_LEGACY_ENABLED = 1,
+ QL_MSI_ENABLED = 2,
+ QL_MSIX_ENABLED = 3,
+ QL_DMA64 = 4,
+ QL_PROMISCUOUS = 5,
+ QL_ALLMULTI = 6,
+ QL_PORT_CFG = 7,
+ QL_CAM_RT_SET = 8,
};
/* link_status bit definitions */
u32 mailbox_in;
u32 mailbox_out;
struct mbox_params idc_mbc;
- struct mutex mpi_mutex;
int tx_ring_size;
int rx_ring_size;
int ql_mb_about_fw(struct ql_adapter *qdev);
void ql_link_on(struct ql_adapter *qdev);
void ql_link_off(struct ql_adapter *qdev);
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control);
+int ql_wait_fifo_empty(struct ql_adapter *qdev);
#if 1
#define QL_ALL_DUMP
if (!netif_running(qdev->ndev))
return status;
- spin_lock(&qdev->hw_lock);
/* Skip the default queue, and update the outbound handler
* queues if they changed.
*/
}
}
exit:
- spin_unlock(&qdev->hw_lock);
return status;
}
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
-#include <linux/rtnetlink.h>
#include <linux/if_vlan.h>
#include <linux/delay.h>
#include <linux/mm.h>
switch (type) {
case MAC_ADDR_TYPE_MULTI_MAC:
+ {
+ u32 upper = (addr[0] << 8) | addr[1];
+ u32 lower = (addr[2] << 24) | (addr[3] << 16) |
+ (addr[4] << 8) | (addr[5]);
+
+ status =
+ ql_wait_reg_rdy(qdev,
+ MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+ if (status)
+ goto exit;
+ ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
+ (index << MAC_ADDR_IDX_SHIFT) |
+ type | MAC_ADDR_E);
+ ql_write32(qdev, MAC_ADDR_DATA, lower);
+ status =
+ ql_wait_reg_rdy(qdev,
+ MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+ if (status)
+ goto exit;
+ ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
+ (index << MAC_ADDR_IDX_SHIFT) |
+ type | MAC_ADDR_E);
+
+ ql_write32(qdev, MAC_ADDR_DATA, upper);
+ status =
+ ql_wait_reg_rdy(qdev,
+ MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+ if (status)
+ goto exit;
+ break;
+ }
case MAC_ADDR_TYPE_CAM_MAC:
{
u32 cam_output;
and possibly the function id. Right now we hardcode
the route field to NIC core.
*/
- if (type == MAC_ADDR_TYPE_CAM_MAC) {
- cam_output = (CAM_OUT_ROUTE_NIC |
- (qdev->
- func << CAM_OUT_FUNC_SHIFT) |
- (0 << CAM_OUT_CQ_ID_SHIFT));
- if (qdev->vlgrp)
- cam_output |= CAM_OUT_RV;
- /* route to NIC core */
- ql_write32(qdev, MAC_ADDR_DATA, cam_output);
- }
+ cam_output = (CAM_OUT_ROUTE_NIC |
+ (qdev->
+ func << CAM_OUT_FUNC_SHIFT) |
+ (0 << CAM_OUT_CQ_ID_SHIFT));
+ if (qdev->vlgrp)
+ cam_output |= CAM_OUT_RV;
+ /* route to NIC core */
+ ql_write32(qdev, MAC_ADDR_DATA, cam_output);
break;
}
case MAC_ADDR_TYPE_VLAN:
}
case RT_IDX_MCAST: /* Pass up All Multicast frames. */
{
- value = RT_IDX_DST_CAM_Q | /* dest */
+ value = RT_IDX_DST_DFLT_Q | /* dest */
RT_IDX_TYPE_NICQ | /* type */
(RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */
break;
}
case RT_IDX_MCAST_MATCH: /* Pass up matched Multicast frames. */
{
- value = RT_IDX_DST_CAM_Q | /* dest */
+ value = RT_IDX_DST_DFLT_Q | /* dest */
RT_IDX_TYPE_NICQ | /* type */
(RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
break;
status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
if (status)
return;
- spin_lock(&qdev->hw_lock);
if (ql_set_mac_addr_reg
(qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) {
QPRINTK(qdev, IFUP, ERR, "Failed to init vlan address.\n");
}
- spin_unlock(&qdev->hw_lock);
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
}
if (status)
return;
- spin_lock(&qdev->hw_lock);
if (ql_set_mac_addr_reg
(qdev, (u8 *) &enable_bit, MAC_ADDR_TYPE_VLAN, vid)) {
QPRINTK(qdev, IFUP, ERR, "Failed to clear vlan address.\n");
}
- spin_unlock(&qdev->hw_lock);
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
}
/*
* Check MPI processor activity.
*/
- if (var & STS_PI) {
+ if ((var & STS_PI) &&
+ (ql_read32(qdev, INTR_MASK) & INTR_MASK_PI)) {
/*
* We've got an async event or mailbox completion.
* Handle it and clear the source of the interrupt.
*/
QPRINTK(qdev, INTR, ERR, "Got MPI processor interrupt.\n");
ql_disable_completion_interrupt(qdev, intr_context->intr);
- queue_delayed_work_on(smp_processor_id(), qdev->workqueue,
- &qdev->mpi_work, 0);
+ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
+ queue_delayed_work_on(smp_processor_id(),
+ qdev->workqueue, &qdev->mpi_work, 0);
work_done++;
}
static int ql_start_rss(struct ql_adapter *qdev)
{
+ u8 init_hash_seed[] = {0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2,
+ 0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f,
+ 0xb0, 0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b,
+ 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80,
+ 0x30, 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b,
+ 0xbe, 0xac, 0x01, 0xfa};
struct ricb *ricb = &qdev->ricb;
int status = 0;
int i;
ricb->base_cq = RSS_L4K;
ricb->flags =
- (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 |
- RSS_RT6);
- ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1);
+ (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6);
+ ricb->mask = cpu_to_le16((u16)(0x3ff));
/*
* Fill out the Indirection Table.
*/
- for (i = 0; i < 256; i++)
- hash_id[i] = i & (qdev->rss_ring_count - 1);
+ for (i = 0; i < 1024; i++)
+ hash_id[i] = (i & (qdev->rss_ring_count - 1));
- /*
- * Random values for the IPv6 and IPv4 Hash Keys.
- */
- get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40);
- get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16);
+ memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40);
+ memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16);
QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
{
int status = 0;
- status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+ /* Clear all the entries in the routing table. */
+ status = ql_clear_routing_entries(qdev);
if (status)
return status;
- /* Clear all the entries in the routing table. */
- status = ql_clear_routing_entries(qdev);
+ status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
if (status)
- goto exit;
+ return status;
status = ql_set_routing_reg(qdev, RT_IDX_ALL_ERR_SLOT, RT_IDX_ERR, 1);
if (status) {
ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP |
min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE));
+ /* Set RX packet routing to use port/pci function on which the
+ * packet arrived on in addition to usual frame routing.
+ * This is helpful on bonding where both interfaces can have
+ * the same MAC address.
+ */
+ ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ);
+
/* Start up the rx queues. */
for (i = 0; i < qdev->rx_ring_count; i++) {
status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]);
end_jiffies = jiffies +
max((unsigned long)1, usecs_to_jiffies(30));
+
+ /* Stop management traffic. */
+ ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
+
+ /* Wait for the NIC and MGMNT FIFOs to empty. */
+ ql_wait_fifo_empty(qdev);
+
ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
do {
status = -ETIMEDOUT;
}
+ /* Resume management traffic. */
+ ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME);
return status;
}
ql_free_rx_buffers(qdev);
- spin_lock(&qdev->hw_lock);
status = ql_adapter_reset(qdev);
if (status)
QPRINTK(qdev, IFDOWN, ERR, "reset(func #%d) FAILED!\n",
qdev->func);
- spin_unlock(&qdev->hw_lock);
return status;
}
status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
if (status)
return;
- spin_lock(&qdev->hw_lock);
/*
* Set or clear promiscuous mode if a
* transition is taking place.
}
}
exit:
- spin_unlock(&qdev->hw_lock);
ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
}
status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
if (status)
return status;
- spin_lock(&qdev->hw_lock);
status = ql_set_mac_addr_reg(qdev, (u8 *) ndev->dev_addr,
MAC_ADDR_TYPE_CAM_MAC, qdev->func * MAX_CQ);
- spin_unlock(&qdev->hw_lock);
if (status)
QPRINTK(qdev, HW, ERR, "Failed to load MAC address.\n");
ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
struct ql_adapter *qdev =
container_of(work, struct ql_adapter, asic_reset_work.work);
int status;
-
+ rtnl_lock();
status = ql_adapter_down(qdev);
if (status)
goto error;
if (status)
goto error;
+ /* Restore rx mode. */
+ clear_bit(QL_ALLMULTI, &qdev->flags);
+ clear_bit(QL_PROMISCUOUS, &qdev->flags);
+ qlge_set_multicast_list(qdev->ndev);
+
+ rtnl_unlock();
return;
error:
QPRINTK(qdev, IFUP, ALERT,
"Driver up/down cycle failed, closing device\n");
- rtnl_lock();
+
set_bit(QL_ADAPTER_UP, &qdev->flags);
dev_close(qdev->ndev);
rtnl_unlock();
return err;
}
+ qdev->ndev = ndev;
+ qdev->pdev = pdev;
+ pci_set_drvdata(pdev, ndev);
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (pos <= 0) {
dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, "
"aborting.\n");
- goto err_out;
+ return pos;
} else {
pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16);
val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
dev_err(&pdev->dev, "PCI region request failed.\n");
- goto err_out;
+ return err;
}
pci_set_master(pdev);
goto err_out;
}
- pci_set_drvdata(pdev, ndev);
+ pci_save_state(pdev);
qdev->reg_base =
ioremap_nocache(pci_resource_start(pdev, 1),
pci_resource_len(pdev, 1));
goto err_out;
}
- qdev->ndev = ndev;
- qdev->pdev = pdev;
err = ql_get_board_info(qdev);
if (err) {
dev_err(&pdev->dev, "Register access failed.\n");
INIT_DELAYED_WORK(&qdev->mpi_work, ql_mpi_work);
INIT_DELAYED_WORK(&qdev->mpi_port_cfg_work, ql_mpi_port_cfg_work);
INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
- mutex_init(&qdev->mpi_mutex);
init_completion(&qdev->ide_completion);
if (!cards_found) {
free_netdev(ndev);
}
+/* Clean up resources without touching hardware. */
+static void ql_eeh_close(struct net_device *ndev)
+{
+ int i;
+ struct ql_adapter *qdev = netdev_priv(ndev);
+
+ if (netif_carrier_ok(ndev)) {
+ netif_carrier_off(ndev);
+ netif_stop_queue(ndev);
+ }
+
+ if (test_bit(QL_ADAPTER_UP, &qdev->flags))
+ cancel_delayed_work_sync(&qdev->asic_reset_work);
+ cancel_delayed_work_sync(&qdev->mpi_reset_work);
+ cancel_delayed_work_sync(&qdev->mpi_work);
+ cancel_delayed_work_sync(&qdev->mpi_idc_work);
+ cancel_delayed_work_sync(&qdev->mpi_port_cfg_work);
+
+ for (i = 0; i < qdev->rss_ring_count; i++)
+ netif_napi_del(&qdev->rx_ring[i].napi);
+
+ clear_bit(QL_ADAPTER_UP, &qdev->flags);
+ ql_tx_ring_clean(qdev);
+ ql_free_rx_buffers(qdev);
+ ql_release_adapter_resources(qdev);
+}
+
/*
* This callback is called by the PCI subsystem whenever
* a PCI bus error is detected.
enum pci_channel_state state)
{
struct net_device *ndev = pci_get_drvdata(pdev);
- struct ql_adapter *qdev = netdev_priv(ndev);
-
- netif_device_detach(ndev);
- if (state == pci_channel_io_perm_failure)
+ switch (state) {
+ case pci_channel_io_normal:
+ return PCI_ERS_RESULT_CAN_RECOVER;
+ case pci_channel_io_frozen:
+ netif_device_detach(ndev);
+ if (netif_running(ndev))
+ ql_eeh_close(ndev);
+ pci_disable_device(pdev);
+ return PCI_ERS_RESULT_NEED_RESET;
+ case pci_channel_io_perm_failure:
+ dev_err(&pdev->dev,
+ "%s: pci_channel_io_perm_failure.\n", __func__);
return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(ndev))
- ql_adapter_down(qdev);
-
- pci_disable_device(pdev);
+ }
/* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ pdev->error_state = pci_channel_io_normal;
+
+ pci_restore_state(pdev);
if (pci_enable_device(pdev)) {
QPRINTK(qdev, IFUP, ERR,
"Cannot re-enable PCI device after reset.\n");
return PCI_ERS_RESULT_DISCONNECT;
}
-
pci_set_master(pdev);
-
- netif_carrier_off(ndev);
- ql_adapter_reset(qdev);
-
- /* Make sure the EEPROM is good */
- memcpy(ndev->perm_addr, ndev->dev_addr, ndev->addr_len);
-
- if (!is_valid_ether_addr(ndev->perm_addr)) {
- QPRINTK(qdev, IFUP, ERR, "After reset, invalid MAC address.\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
return PCI_ERS_RESULT_RECOVERED;
}
{
struct net_device *ndev = pci_get_drvdata(pdev);
struct ql_adapter *qdev = netdev_priv(ndev);
+ int err = 0;
- pci_set_master(pdev);
-
+ if (ql_adapter_reset(qdev))
+ QPRINTK(qdev, DRV, ERR, "reset FAILED!\n");
if (netif_running(ndev)) {
- if (ql_adapter_up(qdev)) {
+ err = qlge_open(ndev);
+ if (err) {
QPRINTK(qdev, IFUP, ERR,
"Device initialization failed after reset.\n");
return;
}
+ } else {
+ QPRINTK(qdev, IFUP, ERR,
+ "Device was not running prior to EEH.\n");
}
-
netif_device_attach(ndev);
}
*/
static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
{
- int status, count;
+ int status;
+ unsigned long count;
- mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
/* Wait for the command to complete. We loop
* here because some AEN might arrive while
* we're waiting for the mailbox command to
- * complete. If more than 5 arrive then we can
+ * complete. If more than 5 seconds expire we can
* assume something is wrong. */
- count = 5;
+ count = jiffies + HZ * MAILBOX_TIMEOUT;
do {
/* Wait for the interrupt to come in. */
status = ql_wait_mbx_cmd_cmplt(qdev);
MB_CMD_STS_GOOD) ||
((mbcp->mbox_out[0] & 0x0000f000) ==
MB_CMD_STS_INTRMDT))
- break;
- } while (--count);
+ goto done;
+ } while (time_before(jiffies, count));
- if (!count) {
- QPRINTK(qdev, DRV, ERR,
- "Timed out waiting for mailbox complete.\n");
- status = -ETIMEDOUT;
- goto end;
- }
+ QPRINTK(qdev, DRV, ERR,
+ "Timed out waiting for mailbox complete.\n");
+ status = -ETIMEDOUT;
+ goto end;
+
+done:
/* Now we can clear the interrupt condition
* and look at our status.
status = -EIO;
}
end:
- mutex_unlock(&qdev->mpi_mutex);
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
return status;
return status;
}
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 2;
+
+ mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL;
+ mbcp->mbox_in[1] = control;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Command not supported by firmware.\n");
+ status = -EINVAL;
+ } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+ /* This indicates that the firmware is
+ * already in the state we are trying to
+ * change it to.
+ */
+ QPRINTK(qdev, DRV, ERR,
+ "Command parameters make no change.\n");
+ }
+ return status;
+}
+
+/* Returns a negative error code or the mailbox command status. */
+static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control)
+{
+ struct mbox_params mbc;
+ struct mbox_params *mbcp = &mbc;
+ int status;
+
+ memset(mbcp, 0, sizeof(struct mbox_params));
+ *control = 0;
+
+ mbcp->in_count = 1;
+ mbcp->out_count = 1;
+
+ mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL;
+
+ status = ql_mailbox_command(qdev, mbcp);
+ if (status)
+ return status;
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) {
+ *control = mbcp->mbox_in[1];
+ return status;
+ }
+
+ if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+ QPRINTK(qdev, DRV, ERR,
+ "Command not supported by firmware.\n");
+ status = -EINVAL;
+ } else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+ QPRINTK(qdev, DRV, ERR,
+ "Failed to get MPI traffic control.\n");
+ status = -EIO;
+ }
+ return status;
+}
+
+int ql_wait_fifo_empty(struct ql_adapter *qdev)
+{
+ int count = 5;
+ u32 mgmnt_fifo_empty;
+ u32 nic_fifo_empty;
+
+ do {
+ nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE;
+ ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty);
+ mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY;
+ if (nic_fifo_empty && mgmnt_fifo_empty)
+ return 0;
+ msleep(100);
+ } while (count-- > 0);
+ return -ETIMEDOUT;
+}
+
/* API called in work thread context to set new TX/RX
* maximum frame size values to match MTU.
*/
static int ql_set_port_cfg(struct ql_adapter *qdev)
{
int status;
+ rtnl_lock();
status = ql_mb_set_port_cfg(qdev);
+ rtnl_unlock();
if (status)
return status;
status = ql_idc_wait(qdev);
container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
int status;
+ rtnl_lock();
status = ql_mb_get_port_cfg(qdev);
+ rtnl_unlock();
if (status) {
QPRINTK(qdev, DRV, ERR,
"Bug: Failed to get port config data.\n");
* needs to be set.
* */
set_bit(QL_CAM_RT_SET, &qdev->flags);
+ rtnl_lock();
status = ql_mb_idc_ack(qdev);
+ rtnl_unlock();
if (status) {
QPRINTK(qdev, DRV, ERR,
"Bug: No pending IDC!\n");
struct mbox_params *mbcp = &mbc;
int err = 0;
- mutex_lock(&qdev->mpi_mutex);
+ rtnl_lock();
+ /* Begin polled mode for MPI */
+ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
while (ql_read32(qdev, STS) & STS_PI) {
memset(mbcp, 0, sizeof(struct mbox_params));
break;
}
- mutex_unlock(&qdev->mpi_mutex);
+ /* End polled mode for MPI */
+ ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+ rtnl_unlock();
ql_enable_completion_interrupt(qdev, 0);
}
RTL_GIGA_MAC_VER_22 = 0x16, // 8168C
RTL_GIGA_MAC_VER_23 = 0x17, // 8168CP
RTL_GIGA_MAC_VER_24 = 0x18, // 8168CP
- RTL_GIGA_MAC_VER_25 = 0x19 // 8168D
+ RTL_GIGA_MAC_VER_25 = 0x19, // 8168D
+ RTL_GIGA_MAC_VER_26 = 0x1a, // 8168D
+ RTL_GIGA_MAC_VER_27 = 0x1b // 8168DP
};
#define _R(NAME,MAC,MASK) \
_R("RTL8168c/8111c", RTL_GIGA_MAC_VER_22, 0xff7e1880), // PCI-E
_R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_23, 0xff7e1880), // PCI-E
_R("RTL8168cp/8111cp", RTL_GIGA_MAC_VER_24, 0xff7e1880), // PCI-E
- _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880) // PCI-E
+ _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_25, 0xff7e1880), // PCI-E
+ _R("RTL8168d/8111d", RTL_GIGA_MAC_VER_26, 0xff7e1880), // PCI-E
+ _R("RTL8168dp/8111dp", RTL_GIGA_MAC_VER_27, 0xff7e1880) // PCI-E
};
#undef _R
DBG_REG = 0xd1,
#define FIX_NAK_1 (1 << 4)
#define FIX_NAK_2 (1 << 3)
+ EFUSEAR = 0xdc,
+#define EFUSEAR_FLAG 0x80000000
+#define EFUSEAR_WRITE_CMD 0x80000000
+#define EFUSEAR_READ_CMD 0x00000000
+#define EFUSEAR_REG_MASK 0x03ff
+#define EFUSEAR_REG_SHIFT 8
+#define EFUSEAR_DATA_MASK 0xff
};
enum rtl_register_content {
mdio_write(ioaddr, reg_addr, mdio_read(ioaddr, reg_addr) | value);
}
+static void mdio_plus_minus(void __iomem *ioaddr, int reg_addr, int p, int m)
+{
+ int val;
+
+ val = mdio_read(ioaddr, reg_addr);
+ mdio_write(ioaddr, reg_addr, (val | p) & ~m);
+}
+
static void rtl_mdio_write(struct net_device *dev, int phy_id, int location,
int val)
{
return value;
}
+static u8 rtl8168d_efuse_read(void __iomem *ioaddr, int reg_addr)
+{
+ u8 value = 0xff;
+ unsigned int i;
+
+ RTL_W32(EFUSEAR, (reg_addr & EFUSEAR_REG_MASK) << EFUSEAR_REG_SHIFT);
+
+ for (i = 0; i < 300; i++) {
+ if (RTL_R32(EFUSEAR) & EFUSEAR_FLAG) {
+ value = RTL_R32(EFUSEAR) & EFUSEAR_DATA_MASK;
+ break;
+ }
+ udelay(100);
+ }
+
+ return value;
+}
+
static void rtl8169_irq_mask_and_ack(void __iomem *ioaddr)
{
RTL_W16(IntrMask, 0x0000);
spin_lock_irqsave(&tp->lock, flags);
tp->vlgrp = grp;
- if (tp->vlgrp)
+ /*
+ * Do not disable RxVlan on 8110SCd.
+ */
+ if (tp->vlgrp || (tp->mac_version == RTL_GIGA_MAC_VER_05))
tp->cp_cmd |= RxVlan;
else
tp->cp_cmd &= ~RxVlan;
int mac_version;
} mac_info[] = {
/* 8168D family. */
- { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_25 },
+ { 0x7cf00000, 0x28300000, RTL_GIGA_MAC_VER_26 },
+ { 0x7cf00000, 0x28100000, RTL_GIGA_MAC_VER_25 },
+ { 0x7c800000, 0x28800000, RTL_GIGA_MAC_VER_27 },
+ { 0x7c800000, 0x28000000, RTL_GIGA_MAC_VER_26 },
/* 8168C family. */
{ 0x7cf00000, 0x3ca00000, RTL_GIGA_MAC_VER_24 },
rtl8168c_3_hw_phy_config(ioaddr);
}
-static void rtl8168d_hw_phy_config(void __iomem *ioaddr)
+static void rtl8168d_1_hw_phy_config(void __iomem *ioaddr)
{
- struct phy_reg phy_reg_init_0[] = {
+ static struct phy_reg phy_reg_init_0[] = {
{ 0x1f, 0x0001 },
- { 0x09, 0x2770 },
- { 0x08, 0x04d0 },
- { 0x0b, 0xad15 },
- { 0x0c, 0x5bf0 },
- { 0x1c, 0xf101 },
+ { 0x06, 0x4064 },
+ { 0x07, 0x2863 },
+ { 0x08, 0x059c },
+ { 0x09, 0x26b4 },
+ { 0x0a, 0x6a19 },
+ { 0x0b, 0xdcc8 },
+ { 0x10, 0xf06d },
+ { 0x14, 0x7f68 },
+ { 0x18, 0x7fd9 },
+ { 0x1c, 0xf0ff },
+ { 0x1d, 0x3d9c },
{ 0x1f, 0x0003 },
- { 0x14, 0x94d7 },
- { 0x12, 0xf4d6 },
- { 0x09, 0xca0f },
- { 0x1f, 0x0002 },
- { 0x0b, 0x0b10 },
- { 0x0c, 0xd1f7 },
- { 0x1f, 0x0002 },
- { 0x06, 0x5461 },
+ { 0x12, 0xf49f },
+ { 0x13, 0x070b },
+ { 0x1a, 0x05ad },
+ { 0x14, 0x94c0 }
+ };
+ static struct phy_reg phy_reg_init_1[] = {
{ 0x1f, 0x0002 },
- { 0x05, 0x6662 },
+ { 0x06, 0x5561 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8332 },
+ { 0x06, 0x5561 }
+ };
+ static struct phy_reg phy_reg_init_2[] = {
+ { 0x1f, 0x0005 },
+ { 0x05, 0xffc2 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8000 },
+ { 0x06, 0xf8f9 },
+ { 0x06, 0xfaef },
+ { 0x06, 0x59ee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x00e0 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x7d59 },
+ { 0x06, 0x0fef },
+ { 0x06, 0x0139 },
+ { 0x06, 0x029e },
+ { 0x06, 0x06ef },
+ { 0x06, 0x1039 },
+ { 0x06, 0x089f },
+ { 0x06, 0x2aee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x01e0 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x7d58 },
+ { 0x06, 0x409e },
+ { 0x06, 0x0f39 },
+ { 0x06, 0x46aa },
+ { 0x06, 0x0bbf },
+ { 0x06, 0x8290 },
+ { 0x06, 0xd682 },
+ { 0x06, 0x9802 },
+ { 0x06, 0x014f },
+ { 0x06, 0xae09 },
+ { 0x06, 0xbf82 },
+ { 0x06, 0x98d6 },
+ { 0x06, 0x82a0 },
+ { 0x06, 0x0201 },
+ { 0x06, 0x4fef },
+ { 0x06, 0x95fe },
+ { 0x06, 0xfdfc },
+ { 0x06, 0x05f8 },
+ { 0x06, 0xf9fa },
+ { 0x06, 0xeef8 },
+ { 0x06, 0xea00 },
+ { 0x06, 0xeef8 },
+ { 0x06, 0xeb00 },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0x7ce3 },
+ { 0x06, 0xf87d },
+ { 0x06, 0xa511 },
+ { 0x06, 0x1112 },
+ { 0x06, 0xd240 },
+ { 0x06, 0xd644 },
+ { 0x06, 0x4402 },
+ { 0x06, 0x8217 },
+ { 0x06, 0xd2a0 },
+ { 0x06, 0xd6aa },
+ { 0x06, 0xaa02 },
+ { 0x06, 0x8217 },
+ { 0x06, 0xae0f },
+ { 0x06, 0xa544 },
+ { 0x06, 0x4402 },
+ { 0x06, 0xae4d },
+ { 0x06, 0xa5aa },
+ { 0x06, 0xaa02 },
+ { 0x06, 0xae47 },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x00ee },
+ { 0x06, 0x834d },
+ { 0x06, 0x0fee },
+ { 0x06, 0x834c },
+ { 0x06, 0x0fee },
+ { 0x06, 0x834f },
+ { 0x06, 0x00ee },
+ { 0x06, 0x8351 },
+ { 0x06, 0x00ee },
+ { 0x06, 0x834a },
+ { 0x06, 0xffee },
+ { 0x06, 0x834b },
+ { 0x06, 0xffe0 },
+ { 0x06, 0x8330 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3158 },
+ { 0x06, 0xfee4 },
+ { 0x06, 0xf88a },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8be0 },
+ { 0x06, 0x8332 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3359 },
+ { 0x06, 0x0fe2 },
+ { 0x06, 0x834d },
+ { 0x06, 0x0c24 },
+ { 0x06, 0x5af0 },
+ { 0x06, 0x1e12 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ce5 },
+ { 0x06, 0xf88d },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13e0 },
+ { 0x06, 0x834f },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x834f },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x009f },
+ { 0x06, 0x0ae0 },
+ { 0x06, 0x834f },
+ { 0x06, 0xa010 },
+ { 0x06, 0xa5ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x01e0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7805 },
+ { 0x06, 0x9e9a },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x049e },
+ { 0x06, 0x10e0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9e0f },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x019e },
+ { 0x06, 0x05ae },
+ { 0x06, 0x0caf },
+ { 0x06, 0x81f8 },
+ { 0x06, 0xaf81 },
+ { 0x06, 0xa3af },
+ { 0x06, 0x81dc },
+ { 0x06, 0xaf82 },
+ { 0x06, 0x13ee },
+ { 0x06, 0x8348 },
+ { 0x06, 0x00ee },
+ { 0x06, 0x8349 },
+ { 0x06, 0x00e0 },
+ { 0x06, 0x8351 },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x8351 },
+ { 0x06, 0x5801 },
+ { 0x06, 0x9fea },
+ { 0x06, 0xd000 },
+ { 0x06, 0xd180 },
+ { 0x06, 0x1f66 },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0xeae3 },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x5af8 },
+ { 0x06, 0x1e20 },
+ { 0x06, 0xe6f8 },
+ { 0x06, 0xeae5 },
+ { 0x06, 0xf8eb },
+ { 0x06, 0xd302 },
+ { 0x06, 0xb3fe },
+ { 0x06, 0xe2f8 },
+ { 0x06, 0x7cef },
+ { 0x06, 0x325b },
+ { 0x06, 0x80e3 },
+ { 0x06, 0xf87d },
+ { 0x06, 0x9e03 },
+ { 0x06, 0x7dff },
+ { 0x06, 0xff0d },
+ { 0x06, 0x581c },
+ { 0x06, 0x551a },
+ { 0x06, 0x6511 },
+ { 0x06, 0xa190 },
+ { 0x06, 0xd3e2 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe383 },
+ { 0x06, 0x491b },
+ { 0x06, 0x56ab },
+ { 0x06, 0x08ef },
+ { 0x06, 0x56e6 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe783 },
+ { 0x06, 0x4910 },
+ { 0x06, 0xd180 },
+ { 0x06, 0x1f66 },
+ { 0x06, 0xa004 },
+ { 0x06, 0xb9e2 },
+ { 0x06, 0x8348 },
+ { 0x06, 0xe383 },
+ { 0x06, 0x49ef },
+ { 0x06, 0x65e2 },
+ { 0x06, 0x834a },
+ { 0x06, 0xe383 },
+ { 0x06, 0x4b1b },
+ { 0x06, 0x56aa },
+ { 0x06, 0x0eef },
+ { 0x06, 0x56e6 },
+ { 0x06, 0x834a },
+ { 0x06, 0xe783 },
+ { 0x06, 0x4be2 },
+ { 0x06, 0x834d },
+ { 0x06, 0xe683 },
+ { 0x06, 0x4ce0 },
+ { 0x06, 0x834d },
+ { 0x06, 0xa000 },
+ { 0x06, 0x0caf },
+ { 0x06, 0x81dc },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4d10 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4dae },
+ { 0x06, 0x0480 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4de0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9e0b },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x049e },
+ { 0x06, 0x04ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x02e0 },
+ { 0x06, 0x8332 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3359 },
+ { 0x06, 0x0fe2 },
+ { 0x06, 0x834d },
+ { 0x06, 0x0c24 },
+ { 0x06, 0x5af0 },
+ { 0x06, 0x1e12 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ce5 },
+ { 0x06, 0xf88d },
+ { 0x06, 0xe083 },
+ { 0x06, 0x30e1 },
+ { 0x06, 0x8331 },
+ { 0x06, 0x6801 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ae5 },
+ { 0x06, 0xf88b },
+ { 0x06, 0xae37 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e03 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4ce1 },
+ { 0x06, 0x834d },
+ { 0x06, 0x1b01 },
+ { 0x06, 0x9e04 },
+ { 0x06, 0xaaa1 },
+ { 0x06, 0xaea8 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e04 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4f00 },
+ { 0x06, 0xaeab },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4f78 },
+ { 0x06, 0x039f },
+ { 0x06, 0x14ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x05d2 },
+ { 0x06, 0x40d6 },
+ { 0x06, 0x5554 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x17d2 },
+ { 0x06, 0xa0d6 },
+ { 0x06, 0xba00 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x17fe },
+ { 0x06, 0xfdfc },
+ { 0x06, 0x05f8 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x60e1 },
+ { 0x06, 0xf861 },
+ { 0x06, 0x6802 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x60e5 },
+ { 0x06, 0xf861 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x48e1 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x580f },
+ { 0x06, 0x1e02 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0xd000 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x5bbf },
+ { 0x06, 0x8350 },
+ { 0x06, 0xef46 },
+ { 0x06, 0xdc19 },
+ { 0x06, 0xddd0 },
+ { 0x06, 0x0102 },
+ { 0x06, 0x825b },
+ { 0x06, 0x0282 },
+ { 0x06, 0x77e0 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x6158 },
+ { 0x06, 0xfde4 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x61fc },
+ { 0x06, 0x04f9 },
+ { 0x06, 0xfafb },
+ { 0x06, 0xc6bf },
+ { 0x06, 0xf840 },
+ { 0x06, 0xbe83 },
+ { 0x06, 0x50a0 },
+ { 0x06, 0x0101 },
+ { 0x06, 0x071b },
+ { 0x06, 0x89cf },
+ { 0x06, 0xd208 },
+ { 0x06, 0xebdb },
+ { 0x06, 0x19b2 },
+ { 0x06, 0xfbff },
+ { 0x06, 0xfefd },
+ { 0x06, 0x04f8 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x48e1 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x6808 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0x58f7 },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x48e5 },
+ { 0x06, 0xf849 },
+ { 0x06, 0xfc04 },
+ { 0x06, 0x4d20 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x4e22 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x4ddf },
+ { 0x06, 0xff01 },
+ { 0x06, 0x4edd },
+ { 0x06, 0xff01 },
+ { 0x05, 0x83d4 },
+ { 0x06, 0x8000 },
+ { 0x05, 0x83d8 },
+ { 0x06, 0x8051 },
+ { 0x02, 0x6010 },
+ { 0x03, 0xdc00 },
+ { 0x05, 0xfff6 },
+ { 0x06, 0x00fc },
{ 0x1f, 0x0000 },
- { 0x14, 0x0060 },
+
{ 0x1f, 0x0000 },
- { 0x0d, 0xf8a0 },
+ { 0x0d, 0xf880 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x0b, 0x0010, 0x00ef);
+ mdio_plus_minus(ioaddr, 0x0c, 0xa200, 0x5d00);
+
+ rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+
+ if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
+ struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x669a },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x669a },
+ { 0x1f, 0x0002 }
+ };
+ int val;
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ val = mdio_read(ioaddr, 0x0d);
+
+ if ((val & 0x00ff) != 0x006c) {
+ u32 set[] = {
+ 0x0065, 0x0066, 0x0067, 0x0068,
+ 0x0069, 0x006a, 0x006b, 0x006c
+ };
+ int i;
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+
+ val &= 0xff00;
+ for (i = 0; i < ARRAY_SIZE(set); i++)
+ mdio_write(ioaddr, 0x0d, val | set[i]);
+ }
+ } else {
+ struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x6662 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x6662 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+ }
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_patch(ioaddr, 0x0d, 0x0300);
+ mdio_patch(ioaddr, 0x0f, 0x0010);
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
+ mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+
+ rtl_phy_write(ioaddr, phy_reg_init_2, ARRAY_SIZE(phy_reg_init_2));
+}
+
+static void rtl8168d_2_hw_phy_config(void __iomem *ioaddr)
+{
+ static struct phy_reg phy_reg_init_0[] = {
+ { 0x1f, 0x0001 },
+ { 0x06, 0x4064 },
+ { 0x07, 0x2863 },
+ { 0x08, 0x059c },
+ { 0x09, 0x26b4 },
+ { 0x0a, 0x6a19 },
+ { 0x0b, 0xdcc8 },
+ { 0x10, 0xf06d },
+ { 0x14, 0x7f68 },
+ { 0x18, 0x7fd9 },
+ { 0x1c, 0xf0ff },
+ { 0x1d, 0x3d9c },
+ { 0x1f, 0x0003 },
+ { 0x12, 0xf49f },
+ { 0x13, 0x070b },
+ { 0x1a, 0x05ad },
+ { 0x14, 0x94c0 },
+
+ { 0x1f, 0x0002 },
+ { 0x06, 0x5561 },
{ 0x1f, 0x0005 },
- { 0x05, 0xffc2 }
+ { 0x05, 0x8332 },
+ { 0x06, 0x5561 }
+ };
+ static struct phy_reg phy_reg_init_1[] = {
+ { 0x1f, 0x0005 },
+ { 0x05, 0xffc2 },
+ { 0x1f, 0x0005 },
+ { 0x05, 0x8000 },
+ { 0x06, 0xf8f9 },
+ { 0x06, 0xfaee },
+ { 0x06, 0xf8ea },
+ { 0x06, 0x00ee },
+ { 0x06, 0xf8eb },
+ { 0x06, 0x00e2 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0x7da5 },
+ { 0x06, 0x1111 },
+ { 0x06, 0x12d2 },
+ { 0x06, 0x40d6 },
+ { 0x06, 0x4444 },
+ { 0x06, 0x0281 },
+ { 0x06, 0xc6d2 },
+ { 0x06, 0xa0d6 },
+ { 0x06, 0xaaaa },
+ { 0x06, 0x0281 },
+ { 0x06, 0xc6ae },
+ { 0x06, 0x0fa5 },
+ { 0x06, 0x4444 },
+ { 0x06, 0x02ae },
+ { 0x06, 0x4da5 },
+ { 0x06, 0xaaaa },
+ { 0x06, 0x02ae },
+ { 0x06, 0x47af },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e00 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4d0f },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4c0f },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4f00 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x5100 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4aff },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4bff },
+ { 0x06, 0xe083 },
+ { 0x06, 0x30e1 },
+ { 0x06, 0x8331 },
+ { 0x06, 0x58fe },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x8ae5 },
+ { 0x06, 0xf88b },
+ { 0x06, 0xe083 },
+ { 0x06, 0x32e1 },
+ { 0x06, 0x8333 },
+ { 0x06, 0x590f },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4d0c },
+ { 0x06, 0x245a },
+ { 0x06, 0xf01e },
+ { 0x06, 0x12e4 },
+ { 0x06, 0xf88c },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8daf },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4f10 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x4fe0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7800 },
+ { 0x06, 0x9f0a },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4fa0 },
+ { 0x06, 0x10a5 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e01 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x059e },
+ { 0x06, 0x9ae0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7804 },
+ { 0x06, 0x9e10 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x039e },
+ { 0x06, 0x0fe0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7801 },
+ { 0x06, 0x9e05 },
+ { 0x06, 0xae0c },
+ { 0x06, 0xaf81 },
+ { 0x06, 0xa7af },
+ { 0x06, 0x8152 },
+ { 0x06, 0xaf81 },
+ { 0x06, 0x8baf },
+ { 0x06, 0x81c2 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4800 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4900 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x5110 },
+ { 0x06, 0xe483 },
+ { 0x06, 0x5158 },
+ { 0x06, 0x019f },
+ { 0x06, 0xead0 },
+ { 0x06, 0x00d1 },
+ { 0x06, 0x801f },
+ { 0x06, 0x66e2 },
+ { 0x06, 0xf8ea },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0xeb5a },
+ { 0x06, 0xf81e },
+ { 0x06, 0x20e6 },
+ { 0x06, 0xf8ea },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0xebd3 },
+ { 0x06, 0x02b3 },
+ { 0x06, 0xfee2 },
+ { 0x06, 0xf87c },
+ { 0x06, 0xef32 },
+ { 0x06, 0x5b80 },
+ { 0x06, 0xe3f8 },
+ { 0x06, 0x7d9e },
+ { 0x06, 0x037d },
+ { 0x06, 0xffff },
+ { 0x06, 0x0d58 },
+ { 0x06, 0x1c55 },
+ { 0x06, 0x1a65 },
+ { 0x06, 0x11a1 },
+ { 0x06, 0x90d3 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x48e3 },
+ { 0x06, 0x8349 },
+ { 0x06, 0x1b56 },
+ { 0x06, 0xab08 },
+ { 0x06, 0xef56 },
+ { 0x06, 0xe683 },
+ { 0x06, 0x48e7 },
+ { 0x06, 0x8349 },
+ { 0x06, 0x10d1 },
+ { 0x06, 0x801f },
+ { 0x06, 0x66a0 },
+ { 0x06, 0x04b9 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x48e3 },
+ { 0x06, 0x8349 },
+ { 0x06, 0xef65 },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4ae3 },
+ { 0x06, 0x834b },
+ { 0x06, 0x1b56 },
+ { 0x06, 0xaa0e },
+ { 0x06, 0xef56 },
+ { 0x06, 0xe683 },
+ { 0x06, 0x4ae7 },
+ { 0x06, 0x834b },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4de6 },
+ { 0x06, 0x834c },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4da0 },
+ { 0x06, 0x000c },
+ { 0x06, 0xaf81 },
+ { 0x06, 0x8be0 },
+ { 0x06, 0x834d },
+ { 0x06, 0x10e4 },
+ { 0x06, 0x834d },
+ { 0x06, 0xae04 },
+ { 0x06, 0x80e4 },
+ { 0x06, 0x834d },
+ { 0x06, 0xe083 },
+ { 0x06, 0x4e78 },
+ { 0x06, 0x039e },
+ { 0x06, 0x0be0 },
+ { 0x06, 0x834e },
+ { 0x06, 0x7804 },
+ { 0x06, 0x9e04 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e02 },
+ { 0x06, 0xe083 },
+ { 0x06, 0x32e1 },
+ { 0x06, 0x8333 },
+ { 0x06, 0x590f },
+ { 0x06, 0xe283 },
+ { 0x06, 0x4d0c },
+ { 0x06, 0x245a },
+ { 0x06, 0xf01e },
+ { 0x06, 0x12e4 },
+ { 0x06, 0xf88c },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8de0 },
+ { 0x06, 0x8330 },
+ { 0x06, 0xe183 },
+ { 0x06, 0x3168 },
+ { 0x06, 0x01e4 },
+ { 0x06, 0xf88a },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x8bae },
+ { 0x06, 0x37ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x03e0 },
+ { 0x06, 0x834c },
+ { 0x06, 0xe183 },
+ { 0x06, 0x4d1b },
+ { 0x06, 0x019e },
+ { 0x06, 0x04aa },
+ { 0x06, 0xa1ae },
+ { 0x06, 0xa8ee },
+ { 0x06, 0x834e },
+ { 0x06, 0x04ee },
+ { 0x06, 0x834f },
+ { 0x06, 0x00ae },
+ { 0x06, 0xabe0 },
+ { 0x06, 0x834f },
+ { 0x06, 0x7803 },
+ { 0x06, 0x9f14 },
+ { 0x06, 0xee83 },
+ { 0x06, 0x4e05 },
+ { 0x06, 0xd240 },
+ { 0x06, 0xd655 },
+ { 0x06, 0x5402 },
+ { 0x06, 0x81c6 },
+ { 0x06, 0xd2a0 },
+ { 0x06, 0xd6ba },
+ { 0x06, 0x0002 },
+ { 0x06, 0x81c6 },
+ { 0x06, 0xfefd },
+ { 0x06, 0xfc05 },
+ { 0x06, 0xf8e0 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x6168 },
+ { 0x06, 0x02e4 },
+ { 0x06, 0xf860 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x61e0 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x4958 },
+ { 0x06, 0x0f1e },
+ { 0x06, 0x02e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x49d0 },
+ { 0x06, 0x0002 },
+ { 0x06, 0x820a },
+ { 0x06, 0xbf83 },
+ { 0x06, 0x50ef },
+ { 0x06, 0x46dc },
+ { 0x06, 0x19dd },
+ { 0x06, 0xd001 },
+ { 0x06, 0x0282 },
+ { 0x06, 0x0a02 },
+ { 0x06, 0x8226 },
+ { 0x06, 0xe0f8 },
+ { 0x06, 0x60e1 },
+ { 0x06, 0xf861 },
+ { 0x06, 0x58fd },
+ { 0x06, 0xe4f8 },
+ { 0x06, 0x60e5 },
+ { 0x06, 0xf861 },
+ { 0x06, 0xfc04 },
+ { 0x06, 0xf9fa },
+ { 0x06, 0xfbc6 },
+ { 0x06, 0xbff8 },
+ { 0x06, 0x40be },
+ { 0x06, 0x8350 },
+ { 0x06, 0xa001 },
+ { 0x06, 0x0107 },
+ { 0x06, 0x1b89 },
+ { 0x06, 0xcfd2 },
+ { 0x06, 0x08eb },
+ { 0x06, 0xdb19 },
+ { 0x06, 0xb2fb },
+ { 0x06, 0xfffe },
+ { 0x06, 0xfd04 },
+ { 0x06, 0xf8e0 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe1f8 },
+ { 0x06, 0x4968 },
+ { 0x06, 0x08e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x4958 },
+ { 0x06, 0xf7e4 },
+ { 0x06, 0xf848 },
+ { 0x06, 0xe5f8 },
+ { 0x06, 0x49fc },
+ { 0x06, 0x044d },
+ { 0x06, 0x2000 },
+ { 0x06, 0x024e },
+ { 0x06, 0x2200 },
+ { 0x06, 0x024d },
+ { 0x06, 0xdfff },
+ { 0x06, 0x014e },
+ { 0x06, 0xddff },
+ { 0x06, 0x0100 },
+ { 0x05, 0x83d8 },
+ { 0x06, 0x8000 },
+ { 0x03, 0xdc00 },
+ { 0x05, 0xfff6 },
+ { 0x06, 0x00fc },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0000 },
+ { 0x0d, 0xf880 },
+ { 0x1f, 0x0000 }
};
rtl_phy_write(ioaddr, phy_reg_init_0, ARRAY_SIZE(phy_reg_init_0));
- if (mdio_read(ioaddr, 0x06) == 0xc400) {
- struct phy_reg phy_reg_init_1[] = {
+ if (rtl8168d_efuse_read(ioaddr, 0x01) == 0xb1) {
+ struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x669a },
{ 0x1f, 0x0005 },
- { 0x01, 0x0300 },
- { 0x1f, 0x0000 },
- { 0x11, 0x401c },
- { 0x16, 0x4100 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x669a },
+
+ { 0x1f, 0x0002 }
+ };
+ int val;
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
+
+ val = mdio_read(ioaddr, 0x0d);
+ if ((val & 0x00ff) != 0x006c) {
+ u32 set[] = {
+ 0x0065, 0x0066, 0x0067, 0x0068,
+ 0x0069, 0x006a, 0x006b, 0x006c
+ };
+ int i;
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+
+ val &= 0xff00;
+ for (i = 0; i < ARRAY_SIZE(set); i++)
+ mdio_write(ioaddr, 0x0d, val | set[i]);
+ }
+ } else {
+ struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x05, 0x2642 },
{ 0x1f, 0x0005 },
- { 0x07, 0x0010 },
- { 0x05, 0x83dc },
- { 0x06, 0x087d },
- { 0x05, 0x8300 },
- { 0x06, 0x0101 },
- { 0x06, 0x05f8 },
- { 0x06, 0xf9fa },
- { 0x06, 0xfbef },
- { 0x06, 0x79e2 },
- { 0x06, 0x835f },
- { 0x06, 0xe0f8 },
- { 0x06, 0x9ae1 },
- { 0x06, 0xf89b },
- { 0x06, 0xef31 },
- { 0x06, 0x3b65 },
- { 0x06, 0xaa07 },
- { 0x06, 0x81e4 },
- { 0x06, 0xf89a },
- { 0x06, 0xe5f8 },
- { 0x06, 0x9baf },
- { 0x06, 0x06ae },
- { 0x05, 0x83dc },
- { 0x06, 0x8300 },
+ { 0x05, 0x8330 },
+ { 0x06, 0x2642 }
};
- rtl_phy_write(ioaddr, phy_reg_init_1,
- ARRAY_SIZE(phy_reg_init_1));
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
- mdio_write(ioaddr, 0x1f, 0x0000);
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_plus_minus(ioaddr, 0x02, 0x0100, 0x0600);
+ mdio_plus_minus(ioaddr, 0x03, 0x0000, 0xe000);
+
+ mdio_write(ioaddr, 0x1f, 0x0001);
+ mdio_write(ioaddr, 0x17, 0x0cc0);
+
+ mdio_write(ioaddr, 0x1f, 0x0002);
+ mdio_patch(ioaddr, 0x0f, 0x0017);
+
+ rtl_phy_write(ioaddr, phy_reg_init_1, ARRAY_SIZE(phy_reg_init_1));
+}
+
+static void rtl8168d_3_hw_phy_config(void __iomem *ioaddr)
+{
+ struct phy_reg phy_reg_init[] = {
+ { 0x1f, 0x0002 },
+ { 0x10, 0x0008 },
+ { 0x0d, 0x006c },
+
+ { 0x1f, 0x0000 },
+ { 0x0d, 0xf880 },
+
+ { 0x1f, 0x0001 },
+ { 0x17, 0x0cc0 },
+
+ { 0x1f, 0x0001 },
+ { 0x0b, 0xa4d8 },
+ { 0x09, 0x281c },
+ { 0x07, 0x2883 },
+ { 0x0a, 0x6b35 },
+ { 0x1d, 0x3da4 },
+ { 0x1c, 0xeffd },
+ { 0x14, 0x7f52 },
+ { 0x18, 0x7fc6 },
+ { 0x08, 0x0601 },
+ { 0x06, 0x4063 },
+ { 0x10, 0xf074 },
+ { 0x1f, 0x0003 },
+ { 0x13, 0x0789 },
+ { 0x12, 0xf4bd },
+ { 0x1a, 0x04fd },
+ { 0x14, 0x84b0 },
+ { 0x1f, 0x0000 },
+ { 0x00, 0x9200 },
+
+ { 0x1f, 0x0005 },
+ { 0x01, 0x0340 },
+ { 0x1f, 0x0001 },
+ { 0x04, 0x4000 },
+ { 0x03, 0x1d21 },
+ { 0x02, 0x0c32 },
+ { 0x01, 0x0200 },
+ { 0x00, 0x5554 },
+ { 0x04, 0x4800 },
+ { 0x04, 0x4000 },
+ { 0x04, 0xf000 },
+ { 0x03, 0xdf01 },
+ { 0x02, 0xdf20 },
+ { 0x01, 0x101a },
+ { 0x00, 0xa0ff },
+ { 0x04, 0xf800 },
+ { 0x04, 0xf000 },
+ { 0x1f, 0x0000 },
+
+ { 0x1f, 0x0007 },
+ { 0x1e, 0x0023 },
+ { 0x16, 0x0000 },
+ { 0x1f, 0x0000 }
+ };
+
+ rtl_phy_write(ioaddr, phy_reg_init, ARRAY_SIZE(phy_reg_init));
}
static void rtl8102e_hw_phy_config(void __iomem *ioaddr)
rtl8168cp_2_hw_phy_config(ioaddr);
break;
case RTL_GIGA_MAC_VER_25:
- rtl8168d_hw_phy_config(ioaddr);
+ rtl8168d_1_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_26:
+ rtl8168d_2_hw_phy_config(ioaddr);
+ break;
+ case RTL_GIGA_MAC_VER_27:
+ rtl8168d_3_hw_phy_config(ioaddr);
break;
default:
}
rtl8169_init_phy(dev, tp);
+
+ /*
+ * Pretend we are using VLANs; This bypasses a nasty bug where
+ * Interrupts stop flowing on high load on 8110SCd controllers.
+ */
+ if (tp->mac_version == RTL_GIGA_MAC_VER_05)
+ RTL_W16(CPlusCmd, RTL_R16(CPlusCmd) | RxVlan);
+
device_set_wakeup_enable(&pdev->dev, tp->features & RTL_FEATURE_WOL);
out:
static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
{
/* Low hurts. Let's disable the filtering. */
- RTL_W16(RxMaxSize, rx_buf_sz);
+ RTL_W16(RxMaxSize, rx_buf_sz + 1);
}
static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
break;
case RTL_GIGA_MAC_VER_25:
+ case RTL_GIGA_MAC_VER_26:
+ case RTL_GIGA_MAC_VER_27:
rtl_hw_start_8168d(ioaddr, pdev);
break;
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
int count;
int cpu;
- if (unlikely(!alloc_cpumask_var(&core_mask, GFP_KERNEL))) {
+ if (unlikely(!zalloc_cpumask_var(&core_mask, GFP_KERNEL))) {
printk(KERN_WARNING
"sfc: RSS disabled due to allocation failure\n");
return 1;
}
- cpumask_clear(core_mask);
count = 0;
for_each_online_cpu(cpu) {
if (!cpumask_test_cpu(cpu, core_mask)) {
* the appropriate LRO method
*/
static void efx_rx_packet_lro(struct efx_channel *channel,
- struct efx_rx_buffer *rx_buf)
+ struct efx_rx_buffer *rx_buf,
+ bool checksummed)
{
struct napi_struct *napi = &channel->napi_str;
skb->len = rx_buf->len;
skb->data_len = rx_buf->len;
skb->truesize += rx_buf->len;
- skb->ip_summed = CHECKSUM_UNNECESSARY;
+ skb->ip_summed =
+ checksummed ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE;
napi_gro_frags(napi);
rx_buf->page = NULL;
} else {
EFX_BUG_ON_PARANOID(!rx_buf->skb);
+ EFX_BUG_ON_PARANOID(!checksummed);
napi_gro_receive(napi, rx_buf->skb);
rx_buf->skb = NULL;
}
if (likely(checksummed || rx_buf->page)) {
- efx_rx_packet_lro(channel, rx_buf);
+ efx_rx_packet_lro(channel, rx_buf, checksummed);
goto done;
}
static struct platform_driver sgiseeq_driver = {
.probe = sgiseeq_probe,
- .remove = __devexit_p(sgiseeq_remove),
+ .remove = __exit_p(sgiseeq_remove),
.driver = {
.name = "sgiseeq",
.owner = THIS_MODULE,
#include <linux/phy.h>
#include <linux/cache.h>
#include <linux/io.h>
+#include <asm/cacheflush.h>
#include "sh_eth.h"
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/errno.h>
/* Include files */
+#include <linux/capability.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/crc32.h>
#include <linux/dma-mapping.h>
#include <linux/debugfs.h>
+#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/mii.h>
#include <asm/irq.h>
#endif
err = -ENOMEM;
- hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+ /* space for skge@pci:0000:04:00.0 */
+ hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:" )
+ + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
if (!hw) {
dev_err(&pdev->dev, "cannot allocate hardware struct\n");
goto err_out_free_regions;
}
+ sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
hw->pdev = pdev;
spin_lock_init(&hw->hw_lock);
goto err_out_free_netdev;
}
- err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw);
+ err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, hw->irq_name, hw);
if (err) {
dev_err(&pdev->dev, "%s: cannot assign irq %d\n",
dev->name, pdev->irq);
}
skge_show_addr(dev);
- if (hw->ports > 1 && (dev1 = skge_devinit(hw, 1, using_dac))) {
- if (register_netdev(dev1) == 0)
+ if (hw->ports > 1) {
+ dev1 = skge_devinit(hw, 1, using_dac);
+ if (dev1 && register_netdev(dev1) == 0)
skge_show_addr(dev1);
else {
/* Failure to register second port need not be fatal */
dev_warn(&pdev->dev, "register of second port failed\n");
hw->dev[1] = NULL;
- free_netdev(dev1);
+ hw->ports = 1;
+ if (dev1)
+ free_netdev(dev1);
}
}
pci_set_drvdata(pdev, hw);
u16 phy_addr;
spinlock_t phy_lock;
struct tasklet_struct phy_task;
+
+ char irq_name[0]; /* skge@pci:000:04:00.0 */
};
enum pause_control {
if (ramsize > 0) {
u32 rxspace;
- hw->flags |= SKY2_HW_RAM_BUFFER;
pr_debug(PFX "%s: ram buffer %dK\n", dev->name, ramsize);
if (ramsize < 16)
rxspace = ramsize / 2;
++hw->ports;
}
+ if (sky2_read8(hw, B2_E_0))
+ hw->flags |= SKY2_HW_RAM_BUFFER;
+
return 0;
}
wol_default = device_may_wakeup(&pdev->dev) ? WAKE_MAGIC : 0;
err = -ENOMEM;
- hw = kzalloc(sizeof(*hw), GFP_KERNEL);
+
+ hw = kzalloc(sizeof(*hw) + strlen(DRV_NAME "@pci:")
+ + strlen(pci_name(pdev)) + 1, GFP_KERNEL);
if (!hw) {
dev_err(&pdev->dev, "cannot allocate hardware struct\n");
goto err_out_free_regions;
}
hw->pdev = pdev;
+ sprintf(hw->irq_name, DRV_NAME "@pci:%s", pci_name(pdev));
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
if (!hw->regs) {
goto err_out_free_netdev;
}
+ netif_carrier_off(dev);
+
netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
err = request_irq(pdev->irq, sky2_intr,
(hw->flags & SKY2_HW_USE_MSI) ? 0 : IRQF_SHARED,
- dev->name, hw);
+ hw->irq_name, hw);
if (err) {
dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
goto err_out_unregister;
struct timer_list watchdog_timer;
struct work_struct restart_work;
wait_queue_head_t msi_wait;
+
+ char irq_name[0];
};
static inline int sky2_is_copper(const struct sky2_hw *hw)
#include <asm/system.h>
#include <asm/uaccess.h>
#include <linux/bitops.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
--- /dev/null
+config STMMAC_ETH
+ tristate "STMicroelectronics 10/100/1000 Ethernet driver"
+ select MII
+ select PHYLIB
+ depends on NETDEVICES && CPU_SUBTYPE_ST40
+ help
+ This is the driver for the ST MAC 10/100/1000 on-chip Ethernet
+ controllers. ST Ethernet IPs are built around a Synopsys IP Core.
+
+if STMMAC_ETH
+
+config STMMAC_DA
+ bool "STMMAC DMA arbitration scheme"
+ default n
+ help
+ Selecting this option, rx has priority over Tx (only for Giga
+ Ethernet device).
+ By default, the DMA arbitration scheme is based on Round-robin
+ (rx:tx priority is 1:1).
+
+config STMMAC_DUAL_MAC
+ bool "STMMAC: dual mac support (EXPERIMENTAL)"
+ default n
+ depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
+ help
+ Some ST SoCs (for example the stx7141 and stx7200c2) have two
+ Ethernet Controllers. This option turns on the second Ethernet
+ device on this kind of platforms.
+
+config STMMAC_TIMER
+ bool "STMMAC Timer optimisation"
+ default n
+ help
+ Use an external timer for mitigating the number of network
+ interrupts.
+
+choice
+ prompt "Select Timer device"
+ depends on STMMAC_TIMER
+
+config STMMAC_TMU_TIMER
+ bool "TMU channel 2"
+ depends on CPU_SH4
+ help
+
+config STMMAC_RTC_TIMER
+ bool "Real time clock"
+ depends on RTC_CLASS
+ help
+
+endchoice
+
+endif
--- /dev/null
+obj-$(CONFIG_STMMAC_ETH) += stmmac.o
+stmmac-$(CONFIG_STMMAC_TIMER) += stmmac_timer.o
+stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o \
+ mac100.o gmac.o $(stmmac-y)
--- /dev/null
+/*******************************************************************************
+ STMMAC Common Header File
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include "descs.h"
+#include <linux/io.h>
+
+/* *********************************************
+ DMA CRS Control and Status Register Mapping
+ * *********************************************/
+#define DMA_BUS_MODE 0x00001000 /* Bus Mode */
+#define DMA_XMT_POLL_DEMAND 0x00001004 /* Transmit Poll Demand */
+#define DMA_RCV_POLL_DEMAND 0x00001008 /* Received Poll Demand */
+#define DMA_RCV_BASE_ADDR 0x0000100c /* Receive List Base */
+#define DMA_TX_BASE_ADDR 0x00001010 /* Transmit List Base */
+#define DMA_STATUS 0x00001014 /* Status Register */
+#define DMA_CONTROL 0x00001018 /* Ctrl (Operational Mode) */
+#define DMA_INTR_ENA 0x0000101c /* Interrupt Enable */
+#define DMA_MISSED_FRAME_CTR 0x00001020 /* Missed Frame Counter */
+#define DMA_CUR_TX_BUF_ADDR 0x00001050 /* Current Host Tx Buffer */
+#define DMA_CUR_RX_BUF_ADDR 0x00001054 /* Current Host Rx Buffer */
+
+/* ********************************
+ DMA Control register defines
+ * ********************************/
+#define DMA_CONTROL_ST 0x00002000 /* Start/Stop Transmission */
+#define DMA_CONTROL_SR 0x00000002 /* Start/Stop Receive */
+
+/* **************************************
+ DMA Interrupt Enable register defines
+ * **************************************/
+/**** NORMAL INTERRUPT ****/
+#define DMA_INTR_ENA_NIE 0x00010000 /* Normal Summary */
+#define DMA_INTR_ENA_TIE 0x00000001 /* Transmit Interrupt */
+#define DMA_INTR_ENA_TUE 0x00000004 /* Transmit Buffer Unavailable */
+#define DMA_INTR_ENA_RIE 0x00000040 /* Receive Interrupt */
+#define DMA_INTR_ENA_ERE 0x00004000 /* Early Receive */
+
+#define DMA_INTR_NORMAL (DMA_INTR_ENA_NIE | DMA_INTR_ENA_RIE | \
+ DMA_INTR_ENA_TIE)
+
+/**** ABNORMAL INTERRUPT ****/
+#define DMA_INTR_ENA_AIE 0x00008000 /* Abnormal Summary */
+#define DMA_INTR_ENA_FBE 0x00002000 /* Fatal Bus Error */
+#define DMA_INTR_ENA_ETE 0x00000400 /* Early Transmit */
+#define DMA_INTR_ENA_RWE 0x00000200 /* Receive Watchdog */
+#define DMA_INTR_ENA_RSE 0x00000100 /* Receive Stopped */
+#define DMA_INTR_ENA_RUE 0x00000080 /* Receive Buffer Unavailable */
+#define DMA_INTR_ENA_UNE 0x00000020 /* Tx Underflow */
+#define DMA_INTR_ENA_OVE 0x00000010 /* Receive Overflow */
+#define DMA_INTR_ENA_TJE 0x00000008 /* Transmit Jabber */
+#define DMA_INTR_ENA_TSE 0x00000002 /* Transmit Stopped */
+
+#define DMA_INTR_ABNORMAL (DMA_INTR_ENA_AIE | DMA_INTR_ENA_FBE | \
+ DMA_INTR_ENA_UNE)
+
+/* DMA default interrupt mask */
+#define DMA_INTR_DEFAULT_MASK (DMA_INTR_NORMAL | DMA_INTR_ABNORMAL)
+
+/* ****************************
+ * DMA Status register defines
+ * ****************************/
+#define DMA_STATUS_GPI 0x10000000 /* PMT interrupt */
+#define DMA_STATUS_GMI 0x08000000 /* MMC interrupt */
+#define DMA_STATUS_GLI 0x04000000 /* GMAC Line interface int. */
+#define DMA_STATUS_GMI 0x08000000
+#define DMA_STATUS_GLI 0x04000000
+#define DMA_STATUS_EB_MASK 0x00380000 /* Error Bits Mask */
+#define DMA_STATUS_EB_TX_ABORT 0x00080000 /* Error Bits - TX Abort */
+#define DMA_STATUS_EB_RX_ABORT 0x00100000 /* Error Bits - RX Abort */
+#define DMA_STATUS_TS_MASK 0x00700000 /* Transmit Process State */
+#define DMA_STATUS_TS_SHIFT 20
+#define DMA_STATUS_RS_MASK 0x000e0000 /* Receive Process State */
+#define DMA_STATUS_RS_SHIFT 17
+#define DMA_STATUS_NIS 0x00010000 /* Normal Interrupt Summary */
+#define DMA_STATUS_AIS 0x00008000 /* Abnormal Interrupt Summary */
+#define DMA_STATUS_ERI 0x00004000 /* Early Receive Interrupt */
+#define DMA_STATUS_FBI 0x00002000 /* Fatal Bus Error Interrupt */
+#define DMA_STATUS_ETI 0x00000400 /* Early Transmit Interrupt */
+#define DMA_STATUS_RWT 0x00000200 /* Receive Watchdog Timeout */
+#define DMA_STATUS_RPS 0x00000100 /* Receive Process Stopped */
+#define DMA_STATUS_RU 0x00000080 /* Receive Buffer Unavailable */
+#define DMA_STATUS_RI 0x00000040 /* Receive Interrupt */
+#define DMA_STATUS_UNF 0x00000020 /* Transmit Underflow */
+#define DMA_STATUS_OVF 0x00000010 /* Receive Overflow */
+#define DMA_STATUS_TJT 0x00000008 /* Transmit Jabber Timeout */
+#define DMA_STATUS_TU 0x00000004 /* Transmit Buffer Unavailable */
+#define DMA_STATUS_TPS 0x00000002 /* Transmit Process Stopped */
+#define DMA_STATUS_TI 0x00000001 /* Transmit Interrupt */
+
+/* Other defines */
+#define HASH_TABLE_SIZE 64
+#define PAUSE_TIME 0x200
+
+/* Flow Control defines */
+#define FLOW_OFF 0
+#define FLOW_RX 1
+#define FLOW_TX 2
+#define FLOW_AUTO (FLOW_TX | FLOW_RX)
+
+/* DMA STORE-AND-FORWARD Operation Mode */
+#define SF_DMA_MODE 1
+
+#define HW_CSUM 1
+#define NO_HW_CSUM 0
+
+/* GMAC TX FIFO is 8K, Rx FIFO is 16K */
+#define BUF_SIZE_16KiB 16384
+#define BUF_SIZE_8KiB 8192
+#define BUF_SIZE_4KiB 4096
+#define BUF_SIZE_2KiB 2048
+
+/* Power Down and WOL */
+#define PMT_NOT_SUPPORTED 0
+#define PMT_SUPPORTED 1
+
+/* Common MAC defines */
+#define MAC_CTRL_REG 0x00000000 /* MAC Control */
+#define MAC_ENABLE_TX 0x00000008 /* Transmitter Enable */
+#define MAC_RNABLE_RX 0x00000004 /* Receiver Enable */
+
+/* MAC Management Counters register */
+#define MMC_CONTROL 0x00000100 /* MMC Control */
+#define MMC_HIGH_INTR 0x00000104 /* MMC High Interrupt */
+#define MMC_LOW_INTR 0x00000108 /* MMC Low Interrupt */
+#define MMC_HIGH_INTR_MASK 0x0000010c /* MMC High Interrupt Mask */
+#define MMC_LOW_INTR_MASK 0x00000110 /* MMC Low Interrupt Mask */
+
+#define MMC_CONTROL_MAX_FRM_MASK 0x0003ff8 /* Maximum Frame Size */
+#define MMC_CONTROL_MAX_FRM_SHIFT 3
+#define MMC_CONTROL_MAX_FRAME 0x7FF
+
+struct stmmac_extra_stats {
+ /* Transmit errors */
+ unsigned long tx_underflow ____cacheline_aligned;
+ unsigned long tx_carrier;
+ unsigned long tx_losscarrier;
+ unsigned long tx_heartbeat;
+ unsigned long tx_deferred;
+ unsigned long tx_vlan;
+ unsigned long tx_jabber;
+ unsigned long tx_frame_flushed;
+ unsigned long tx_payload_error;
+ unsigned long tx_ip_header_error;
+ /* Receive errors */
+ unsigned long rx_desc;
+ unsigned long rx_partial;
+ unsigned long rx_runt;
+ unsigned long rx_toolong;
+ unsigned long rx_collision;
+ unsigned long rx_crc;
+ unsigned long rx_lenght;
+ unsigned long rx_mii;
+ unsigned long rx_multicast;
+ unsigned long rx_gmac_overflow;
+ unsigned long rx_watchdog;
+ unsigned long da_rx_filter_fail;
+ unsigned long sa_rx_filter_fail;
+ unsigned long rx_missed_cntr;
+ unsigned long rx_overflow_cntr;
+ unsigned long rx_vlan;
+ /* Tx/Rx IRQ errors */
+ unsigned long tx_undeflow_irq;
+ unsigned long tx_process_stopped_irq;
+ unsigned long tx_jabber_irq;
+ unsigned long rx_overflow_irq;
+ unsigned long rx_buf_unav_irq;
+ unsigned long rx_process_stopped_irq;
+ unsigned long rx_watchdog_irq;
+ unsigned long tx_early_irq;
+ unsigned long fatal_bus_error_irq;
+ /* Extra info */
+ unsigned long threshold;
+ unsigned long tx_pkt_n;
+ unsigned long rx_pkt_n;
+ unsigned long poll_n;
+ unsigned long sched_timer_n;
+ unsigned long normal_irq_n;
+};
+
+/* GMAC core can compute the checksums in HW. */
+enum rx_frame_status {
+ good_frame = 0,
+ discard_frame = 1,
+ csum_none = 2,
+};
+
+static inline void stmmac_set_mac_addr(unsigned long ioaddr, u8 addr[6],
+ unsigned int high, unsigned int low)
+{
+ unsigned long data;
+
+ data = (addr[5] << 8) | addr[4];
+ writel(data, ioaddr + high);
+ data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+ writel(data, ioaddr + low);
+
+ return;
+}
+
+static inline void stmmac_get_mac_addr(unsigned long ioaddr,
+ unsigned char *addr, unsigned int high,
+ unsigned int low)
+{
+ unsigned int hi_addr, lo_addr;
+
+ /* Read the MAC address from the hardware */
+ hi_addr = readl(ioaddr + high);
+ lo_addr = readl(ioaddr + low);
+
+ /* Extract the MAC address from the high and low words */
+ addr[0] = lo_addr & 0xff;
+ addr[1] = (lo_addr >> 8) & 0xff;
+ addr[2] = (lo_addr >> 16) & 0xff;
+ addr[3] = (lo_addr >> 24) & 0xff;
+ addr[4] = hi_addr & 0xff;
+ addr[5] = (hi_addr >> 8) & 0xff;
+
+ return;
+}
+
+struct stmmac_ops {
+ /* MAC core initialization */
+ void (*core_init) (unsigned long ioaddr) ____cacheline_aligned;
+ /* DMA core initialization */
+ int (*dma_init) (unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx);
+ /* Dump MAC registers */
+ void (*dump_mac_regs) (unsigned long ioaddr);
+ /* Dump DMA registers */
+ void (*dump_dma_regs) (unsigned long ioaddr);
+ /* Set tx/rx threshold in the csr6 register
+ * An invalid value enables the store-and-forward mode */
+ void (*dma_mode) (unsigned long ioaddr, int txmode, int rxmode);
+ /* To track extra statistic (if supported) */
+ void (*dma_diagnostic_fr) (void *data, struct stmmac_extra_stats *x,
+ unsigned long ioaddr);
+ /* RX descriptor ring initialization */
+ void (*init_rx_desc) (struct dma_desc *p, unsigned int ring_size,
+ int disable_rx_ic);
+ /* TX descriptor ring initialization */
+ void (*init_tx_desc) (struct dma_desc *p, unsigned int ring_size);
+
+ /* Invoked by the xmit function to prepare the tx descriptor */
+ void (*prepare_tx_desc) (struct dma_desc *p, int is_fs, int len,
+ int csum_flag);
+ /* Set/get the owner of the descriptor */
+ void (*set_tx_owner) (struct dma_desc *p);
+ int (*get_tx_owner) (struct dma_desc *p);
+ /* Invoked by the xmit function to close the tx descriptor */
+ void (*close_tx_desc) (struct dma_desc *p);
+ /* Clean the tx descriptor as soon as the tx irq is received */
+ void (*release_tx_desc) (struct dma_desc *p);
+ /* Clear interrupt on tx frame completion. When this bit is
+ * set an interrupt happens as soon as the frame is transmitted */
+ void (*clear_tx_ic) (struct dma_desc *p);
+ /* Last tx segment reports the transmit status */
+ int (*get_tx_ls) (struct dma_desc *p);
+ /* Return the transmit status looking at the TDES1 */
+ int (*tx_status) (void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p, unsigned long ioaddr);
+ /* Get the buffer size from the descriptor */
+ int (*get_tx_len) (struct dma_desc *p);
+ /* Handle extra events on specific interrupts hw dependent */
+ void (*host_irq_status) (unsigned long ioaddr);
+ int (*get_rx_owner) (struct dma_desc *p);
+ void (*set_rx_owner) (struct dma_desc *p);
+ /* Get the receive frame size */
+ int (*get_rx_frame_len) (struct dma_desc *p);
+ /* Return the reception status looking at the RDES1 */
+ int (*rx_status) (void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p);
+ /* Multicast filter setting */
+ void (*set_filter) (struct net_device *dev);
+ /* Flow control setting */
+ void (*flow_ctrl) (unsigned long ioaddr, unsigned int duplex,
+ unsigned int fc, unsigned int pause_time);
+ /* Set power management mode (e.g. magic frame) */
+ void (*pmt) (unsigned long ioaddr, unsigned long mode);
+ /* Set/Get Unicast MAC addresses */
+ void (*set_umac_addr) (unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n);
+ void (*get_umac_addr) (unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n);
+};
+
+struct mac_link {
+ int port;
+ int duplex;
+ int speed;
+};
+
+struct mii_regs {
+ unsigned int addr; /* MII Address */
+ unsigned int data; /* MII Data */
+};
+
+struct hw_cap {
+ unsigned int version; /* Core Version register (GMAC) */
+ unsigned int pmt; /* Power-Down mode (GMAC) */
+ struct mac_link link;
+ struct mii_regs mii;
+};
+
+struct mac_device_info {
+ struct hw_cap hw;
+ struct stmmac_ops *ops;
+};
+
+struct mac_device_info *gmac_setup(unsigned long addr);
+struct mac_device_info *mac100_setup(unsigned long addr);
--- /dev/null
+/*******************************************************************************
+ Header File to describe the DMA descriptors
+ Use enhanced descriptors in case of GMAC Cores.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+struct dma_desc {
+ /* Receive descriptor */
+ union {
+ struct {
+ /* RDES0 */
+ u32 reserved1:1;
+ u32 crc_error:1;
+ u32 dribbling:1;
+ u32 mii_error:1;
+ u32 receive_watchdog:1;
+ u32 frame_type:1;
+ u32 collision:1;
+ u32 frame_too_long:1;
+ u32 last_descriptor:1;
+ u32 first_descriptor:1;
+ u32 multicast_frame:1;
+ u32 run_frame:1;
+ u32 length_error:1;
+ u32 partial_frame_error:1;
+ u32 descriptor_error:1;
+ u32 error_summary:1;
+ u32 frame_length:14;
+ u32 filtering_fail:1;
+ u32 own:1;
+ /* RDES1 */
+ u32 buffer1_size:11;
+ u32 buffer2_size:11;
+ u32 reserved2:2;
+ u32 second_address_chained:1;
+ u32 end_ring:1;
+ u32 reserved3:5;
+ u32 disable_ic:1;
+ } rx;
+ struct {
+ /* RDES0 */
+ u32 payload_csum_error:1;
+ u32 crc_error:1;
+ u32 dribbling:1;
+ u32 error_gmii:1;
+ u32 receive_watchdog:1;
+ u32 frame_type:1;
+ u32 late_collision:1;
+ u32 ipc_csum_error:1;
+ u32 last_descriptor:1;
+ u32 first_descriptor:1;
+ u32 vlan_tag:1;
+ u32 overflow_error:1;
+ u32 length_error:1;
+ u32 sa_filter_fail:1;
+ u32 descriptor_error:1;
+ u32 error_summary:1;
+ u32 frame_length:14;
+ u32 da_filter_fail:1;
+ u32 own:1;
+ /* RDES1 */
+ u32 buffer1_size:13;
+ u32 reserved1:1;
+ u32 second_address_chained:1;
+ u32 end_ring:1;
+ u32 buffer2_size:13;
+ u32 reserved2:2;
+ u32 disable_ic:1;
+ } erx; /* -- enhanced -- */
+
+ /* Transmit descriptor */
+ struct {
+ /* TDES0 */
+ u32 deferred:1;
+ u32 underflow_error:1;
+ u32 excessive_deferral:1;
+ u32 collision_count:4;
+ u32 heartbeat_fail:1;
+ u32 excessive_collisions:1;
+ u32 late_collision:1;
+ u32 no_carrier:1;
+ u32 loss_carrier:1;
+ u32 reserved1:3;
+ u32 error_summary:1;
+ u32 reserved2:15;
+ u32 own:1;
+ /* TDES1 */
+ u32 buffer1_size:11;
+ u32 buffer2_size:11;
+ u32 reserved3:1;
+ u32 disable_padding:1;
+ u32 second_address_chained:1;
+ u32 end_ring:1;
+ u32 crc_disable:1;
+ u32 reserved4:2;
+ u32 first_segment:1;
+ u32 last_segment:1;
+ u32 interrupt:1;
+ } tx;
+ struct {
+ /* TDES0 */
+ u32 deferred:1;
+ u32 underflow_error:1;
+ u32 excessive_deferral:1;
+ u32 collision_count:4;
+ u32 vlan_frame:1;
+ u32 excessive_collisions:1;
+ u32 late_collision:1;
+ u32 no_carrier:1;
+ u32 loss_carrier:1;
+ u32 payload_error:1;
+ u32 frame_flushed:1;
+ u32 jabber_timeout:1;
+ u32 error_summary:1;
+ u32 ip_header_error:1;
+ u32 time_stamp_status:1;
+ u32 reserved1:2;
+ u32 second_address_chained:1;
+ u32 end_ring:1;
+ u32 checksum_insertion:2;
+ u32 reserved2:1;
+ u32 time_stamp_enable:1;
+ u32 disable_padding:1;
+ u32 crc_disable:1;
+ u32 first_segment:1;
+ u32 last_segment:1;
+ u32 interrupt:1;
+ u32 own:1;
+ /* TDES1 */
+ u32 buffer1_size:13;
+ u32 reserved3:3;
+ u32 buffer2_size:13;
+ u32 reserved4:3;
+ } etx; /* -- enhanced -- */
+ } des01;
+ unsigned int des2;
+ unsigned int des3;
+};
+
+/* Transmit checksum insertion control */
+enum tdes_csum_insertion {
+ cic_disabled = 0, /* Checksum Insertion Control */
+ cic_only_ip = 1, /* Only IP header */
+ cic_no_pseudoheader = 2, /* IP header but pseudoheader
+ * is not calculated */
+ cic_full = 3, /* IP header and pseudoheader */
+};
--- /dev/null
+/*******************************************************************************
+ This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
+ DWC Ether MAC 10/100/1000 Universal version 3.41a has been used for
+ developing this code.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+#include "gmac.h"
+
+#undef GMAC_DEBUG
+/*#define GMAC_DEBUG*/
+#undef FRAME_FILTER_DEBUG
+/*#define FRAME_FILTER_DEBUG*/
+#ifdef GMAC_DEBUG
+#define DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define DBG(fmt, args...) do { } while (0)
+#endif
+
+static void gmac_dump_regs(unsigned long ioaddr)
+{
+ int i;
+ pr_info("\t----------------------------------------------\n"
+ "\t GMAC registers (base addr = 0x%8x)\n"
+ "\t----------------------------------------------\n",
+ (unsigned int)ioaddr);
+
+ for (i = 0; i < 55; i++) {
+ int offset = i * 4;
+ pr_info("\tReg No. %d (offset 0x%x): 0x%08x\n", i,
+ offset, readl(ioaddr + offset));
+ }
+ return;
+}
+
+static int gmac_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx, u32 dma_rx)
+{
+ u32 value = readl(ioaddr + DMA_BUS_MODE);
+ /* DMA SW reset */
+ value |= DMA_BUS_MODE_SFT_RESET;
+ writel(value, ioaddr + DMA_BUS_MODE);
+ do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+ value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL |
+ ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
+ (pbl << DMA_BUS_MODE_RPBL_SHIFT));
+
+#ifdef CONFIG_STMMAC_DA
+ value |= DMA_BUS_MODE_DA; /* Rx has priority over tx */
+#endif
+ writel(value, ioaddr + DMA_BUS_MODE);
+
+ /* Mask interrupts by writing to CSR7 */
+ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+
+ /* The base address of the RX/TX descriptor lists must be written into
+ * DMA CSR3 and CSR4, respectively. */
+ writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
+ writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+
+ return 0;
+}
+
+/* Transmit FIFO flush operation */
+static void gmac_flush_tx_fifo(unsigned long ioaddr)
+{
+ u32 csr6 = readl(ioaddr + DMA_CONTROL);
+ writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
+
+ do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
+}
+
+static void gmac_dma_operation_mode(unsigned long ioaddr, int txmode,
+ int rxmode)
+{
+ u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+ if (txmode == SF_DMA_MODE) {
+ DBG(KERN_DEBUG "GMAC: enabling TX store and forward mode\n");
+ /* Transmit COE type 2 cannot be done in cut-through mode. */
+ csr6 |= DMA_CONTROL_TSF;
+ /* Operating on second frame increase the performance
+ * especially when transmit store-and-forward is used.*/
+ csr6 |= DMA_CONTROL_OSF;
+ } else {
+ DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode"
+ " (threshold = %d)\n", txmode);
+ csr6 &= ~DMA_CONTROL_TSF;
+ csr6 &= DMA_CONTROL_TC_TX_MASK;
+ /* Set the transmit threashold */
+ if (txmode <= 32)
+ csr6 |= DMA_CONTROL_TTC_32;
+ else if (txmode <= 64)
+ csr6 |= DMA_CONTROL_TTC_64;
+ else if (txmode <= 128)
+ csr6 |= DMA_CONTROL_TTC_128;
+ else if (txmode <= 192)
+ csr6 |= DMA_CONTROL_TTC_192;
+ else
+ csr6 |= DMA_CONTROL_TTC_256;
+ }
+
+ if (rxmode == SF_DMA_MODE) {
+ DBG(KERN_DEBUG "GMAC: enabling RX store and forward mode\n");
+ csr6 |= DMA_CONTROL_RSF;
+ } else {
+ DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode"
+ " (threshold = %d)\n", rxmode);
+ csr6 &= ~DMA_CONTROL_RSF;
+ csr6 &= DMA_CONTROL_TC_RX_MASK;
+ if (rxmode <= 32)
+ csr6 |= DMA_CONTROL_RTC_32;
+ else if (rxmode <= 64)
+ csr6 |= DMA_CONTROL_RTC_64;
+ else if (rxmode <= 96)
+ csr6 |= DMA_CONTROL_RTC_96;
+ else
+ csr6 |= DMA_CONTROL_RTC_128;
+ }
+
+ writel(csr6, ioaddr + DMA_CONTROL);
+ return;
+}
+
+/* Not yet implemented --- no RMON module */
+static void gmac_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
+ unsigned long ioaddr)
+{
+ return;
+}
+
+static void gmac_dump_dma_regs(unsigned long ioaddr)
+{
+ int i;
+ pr_info(" DMA registers\n");
+ for (i = 0; i < 22; i++) {
+ if ((i < 9) || (i > 17)) {
+ int offset = i * 4;
+ pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i,
+ (DMA_BUS_MODE + offset),
+ readl(ioaddr + DMA_BUS_MODE + offset));
+ }
+ }
+ return;
+}
+
+static int gmac_get_tx_frame_status(void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p, unsigned long ioaddr)
+{
+ int ret = 0;
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+
+ if (unlikely(p->des01.etx.error_summary)) {
+ DBG(KERN_ERR "GMAC TX error... 0x%08x\n", p->des01.etx);
+ if (unlikely(p->des01.etx.jabber_timeout)) {
+ DBG(KERN_ERR "\tjabber_timeout error\n");
+ x->tx_jabber++;
+ }
+
+ if (unlikely(p->des01.etx.frame_flushed)) {
+ DBG(KERN_ERR "\tframe_flushed error\n");
+ x->tx_frame_flushed++;
+ gmac_flush_tx_fifo(ioaddr);
+ }
+
+ if (unlikely(p->des01.etx.loss_carrier)) {
+ DBG(KERN_ERR "\tloss_carrier error\n");
+ x->tx_losscarrier++;
+ stats->tx_carrier_errors++;
+ }
+ if (unlikely(p->des01.etx.no_carrier)) {
+ DBG(KERN_ERR "\tno_carrier error\n");
+ x->tx_carrier++;
+ stats->tx_carrier_errors++;
+ }
+ if (unlikely(p->des01.etx.late_collision)) {
+ DBG(KERN_ERR "\tlate_collision error\n");
+ stats->collisions += p->des01.etx.collision_count;
+ }
+ if (unlikely(p->des01.etx.excessive_collisions)) {
+ DBG(KERN_ERR "\texcessive_collisions\n");
+ stats->collisions += p->des01.etx.collision_count;
+ }
+ if (unlikely(p->des01.etx.excessive_deferral)) {
+ DBG(KERN_INFO "\texcessive tx_deferral\n");
+ x->tx_deferred++;
+ }
+
+ if (unlikely(p->des01.etx.underflow_error)) {
+ DBG(KERN_ERR "\tunderflow error\n");
+ gmac_flush_tx_fifo(ioaddr);
+ x->tx_underflow++;
+ }
+
+ if (unlikely(p->des01.etx.ip_header_error)) {
+ DBG(KERN_ERR "\tTX IP header csum error\n");
+ x->tx_ip_header_error++;
+ }
+
+ if (unlikely(p->des01.etx.payload_error)) {
+ DBG(KERN_ERR "\tAddr/Payload csum error\n");
+ x->tx_payload_error++;
+ gmac_flush_tx_fifo(ioaddr);
+ }
+
+ ret = -1;
+ }
+
+ if (unlikely(p->des01.etx.deferred)) {
+ DBG(KERN_INFO "GMAC TX status: tx deferred\n");
+ x->tx_deferred++;
+ }
+#ifdef STMMAC_VLAN_TAG_USED
+ if (p->des01.etx.vlan_frame) {
+ DBG(KERN_INFO "GMAC TX status: VLAN frame\n");
+ x->tx_vlan++;
+ }
+#endif
+
+ return ret;
+}
+
+static int gmac_get_tx_len(struct dma_desc *p)
+{
+ return p->des01.etx.buffer1_size;
+}
+
+static int gmac_coe_rdes0(int ipc_err, int type, int payload_err)
+{
+ int ret = good_frame;
+ u32 status = (type << 2 | ipc_err << 1 | payload_err) & 0x7;
+
+ /* bits 5 7 0 | Frame status
+ * ----------------------------------------------------------
+ * 0 0 0 | IEEE 802.3 Type frame (lenght < 1536 octects)
+ * 1 0 0 | IPv4/6 No CSUM errorS.
+ * 1 0 1 | IPv4/6 CSUM PAYLOAD error
+ * 1 1 0 | IPv4/6 CSUM IP HR error
+ * 1 1 1 | IPv4/6 IP PAYLOAD AND HEADER errorS
+ * 0 0 1 | IPv4/6 unsupported IP PAYLOAD
+ * 0 1 1 | COE bypassed.. no IPv4/6 frame
+ * 0 1 0 | Reserved.
+ */
+ if (status == 0x0) {
+ DBG(KERN_INFO "RX Des0 status: IEEE 802.3 Type frame.\n");
+ ret = good_frame;
+ } else if (status == 0x4) {
+ DBG(KERN_INFO "RX Des0 status: IPv4/6 No CSUM errorS.\n");
+ ret = good_frame;
+ } else if (status == 0x5) {
+ DBG(KERN_ERR "RX Des0 status: IPv4/6 Payload Error.\n");
+ ret = csum_none;
+ } else if (status == 0x6) {
+ DBG(KERN_ERR "RX Des0 status: IPv4/6 Header Error.\n");
+ ret = csum_none;
+ } else if (status == 0x7) {
+ DBG(KERN_ERR
+ "RX Des0 status: IPv4/6 Header and Payload Error.\n");
+ ret = csum_none;
+ } else if (status == 0x1) {
+ DBG(KERN_ERR
+ "RX Des0 status: IPv4/6 unsupported IP PAYLOAD.\n");
+ ret = discard_frame;
+ } else if (status == 0x3) {
+ DBG(KERN_ERR "RX Des0 status: No IPv4, IPv6 frame.\n");
+ ret = discard_frame;
+ }
+ return ret;
+}
+
+static int gmac_get_rx_frame_status(void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p)
+{
+ int ret = good_frame;
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+
+ if (unlikely(p->des01.erx.error_summary)) {
+ DBG(KERN_ERR "GMAC RX Error Summary... 0x%08x\n", p->des01.erx);
+ if (unlikely(p->des01.erx.descriptor_error)) {
+ DBG(KERN_ERR "\tdescriptor error\n");
+ x->rx_desc++;
+ stats->rx_length_errors++;
+ }
+ if (unlikely(p->des01.erx.overflow_error)) {
+ DBG(KERN_ERR "\toverflow error\n");
+ x->rx_gmac_overflow++;
+ }
+
+ if (unlikely(p->des01.erx.ipc_csum_error))
+ DBG(KERN_ERR "\tIPC Csum Error/Giant frame\n");
+
+ if (unlikely(p->des01.erx.late_collision)) {
+ DBG(KERN_ERR "\tlate_collision error\n");
+ stats->collisions++;
+ stats->collisions++;
+ }
+ if (unlikely(p->des01.erx.receive_watchdog)) {
+ DBG(KERN_ERR "\treceive_watchdog error\n");
+ x->rx_watchdog++;
+ }
+ if (unlikely(p->des01.erx.error_gmii)) {
+ DBG(KERN_ERR "\tReceive Error\n");
+ x->rx_mii++;
+ }
+ if (unlikely(p->des01.erx.crc_error)) {
+ DBG(KERN_ERR "\tCRC error\n");
+ x->rx_crc++;
+ stats->rx_crc_errors++;
+ }
+ ret = discard_frame;
+ }
+
+ /* After a payload csum error, the ES bit is set.
+ * It doesn't match with the information reported into the databook.
+ * At any rate, we need to understand if the CSUM hw computation is ok
+ * and report this info to the upper layers. */
+ ret = gmac_coe_rdes0(p->des01.erx.ipc_csum_error,
+ p->des01.erx.frame_type, p->des01.erx.payload_csum_error);
+
+ if (unlikely(p->des01.erx.dribbling)) {
+ DBG(KERN_ERR "GMAC RX: dribbling error\n");
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.erx.sa_filter_fail)) {
+ DBG(KERN_ERR "GMAC RX : Source Address filter fail\n");
+ x->sa_rx_filter_fail++;
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.erx.da_filter_fail)) {
+ DBG(KERN_ERR "GMAC RX : Destination Address filter fail\n");
+ x->da_rx_filter_fail++;
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.erx.length_error)) {
+ DBG(KERN_ERR "GMAC RX: length_error error\n");
+ x->rx_lenght++;
+ ret = discard_frame;
+ }
+#ifdef STMMAC_VLAN_TAG_USED
+ if (p->des01.erx.vlan_tag) {
+ DBG(KERN_INFO "GMAC RX: VLAN frame tagged\n");
+ x->rx_vlan++;
+ }
+#endif
+ return ret;
+}
+
+static void gmac_irq_status(unsigned long ioaddr)
+{
+ u32 intr_status = readl(ioaddr + GMAC_INT_STATUS);
+
+ /* Not used events (e.g. MMC interrupts) are not handled. */
+ if ((intr_status & mmc_tx_irq))
+ DBG(KERN_DEBUG "GMAC: MMC tx interrupt: 0x%08x\n",
+ readl(ioaddr + GMAC_MMC_TX_INTR));
+ if (unlikely(intr_status & mmc_rx_irq))
+ DBG(KERN_DEBUG "GMAC: MMC rx interrupt: 0x%08x\n",
+ readl(ioaddr + GMAC_MMC_RX_INTR));
+ if (unlikely(intr_status & mmc_rx_csum_offload_irq))
+ DBG(KERN_DEBUG "GMAC: MMC rx csum offload: 0x%08x\n",
+ readl(ioaddr + GMAC_MMC_RX_CSUM_OFFLOAD));
+ if (unlikely(intr_status & pmt_irq)) {
+ DBG(KERN_DEBUG "GMAC: received Magic frame\n");
+ /* clear the PMT bits 5 and 6 by reading the PMT
+ * status register. */
+ readl(ioaddr + GMAC_PMT);
+ }
+
+ return;
+}
+
+static void gmac_core_init(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + GMAC_CONTROL);
+ value |= GMAC_CORE_INIT;
+ writel(value, ioaddr + GMAC_CONTROL);
+
+ /* STBus Bridge Configuration */
+ /*writel(0xc5608, ioaddr + 0x00007000);*/
+
+ /* Freeze MMC counters */
+ writel(0x8, ioaddr + GMAC_MMC_CTRL);
+ /* Mask GMAC interrupts */
+ writel(0x207, ioaddr + GMAC_INT_MASK);
+
+#ifdef STMMAC_VLAN_TAG_USED
+ /* Tag detection without filtering */
+ writel(0x0, ioaddr + GMAC_VLAN_TAG);
+#endif
+ return;
+}
+
+static void gmac_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n)
+{
+ stmmac_set_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+ GMAC_ADDR_LOW(reg_n));
+}
+
+static void gmac_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n)
+{
+ stmmac_get_mac_addr(ioaddr, addr, GMAC_ADDR_HIGH(reg_n),
+ GMAC_ADDR_LOW(reg_n));
+}
+
+static void gmac_set_filter(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ unsigned int value = 0;
+
+ DBG(KERN_INFO "%s: # mcasts %d, # unicast %d\n",
+ __func__, dev->mc_count, dev->uc_count);
+
+ if (dev->flags & IFF_PROMISC)
+ value = GMAC_FRAME_FILTER_PR;
+ else if ((dev->mc_count > HASH_TABLE_SIZE)
+ || (dev->flags & IFF_ALLMULTI)) {
+ value = GMAC_FRAME_FILTER_PM; /* pass all multi */
+ writel(0xffffffff, ioaddr + GMAC_HASH_HIGH);
+ writel(0xffffffff, ioaddr + GMAC_HASH_LOW);
+ } else if (dev->mc_count > 0) {
+ int i;
+ u32 mc_filter[2];
+ struct dev_mc_list *mclist;
+
+ /* Hash filter for multicast */
+ value = GMAC_FRAME_FILTER_HMC;
+
+ memset(mc_filter, 0, sizeof(mc_filter));
+ for (i = 0, mclist = dev->mc_list;
+ mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+ /* The upper 6 bits of the calculated CRC are used to
+ index the contens of the hash table */
+ int bit_nr =
+ bitrev32(~crc32_le(~0, mclist->dmi_addr, 6)) >> 26;
+ /* The most significant bit determines the register to
+ * use (H/L) while the other 5 bits determine the bit
+ * within the register. */
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ }
+ writel(mc_filter[0], ioaddr + GMAC_HASH_LOW);
+ writel(mc_filter[1], ioaddr + GMAC_HASH_HIGH);
+ }
+
+ /* Handle multiple unicast addresses (perfect filtering)*/
+ if (dev->uc_count > GMAC_MAX_UNICAST_ADDRESSES)
+ /* Switch to promiscuous mode is more than 16 addrs
+ are required */
+ value |= GMAC_FRAME_FILTER_PR;
+ else {
+ int i;
+ struct dev_addr_list *uc_ptr = dev->uc_list;
+
+ for (i = 0; i < dev->uc_count; i++) {
+ gmac_set_umac_addr(ioaddr, uc_ptr->da_addr,
+ i + 1);
+
+ DBG(KERN_INFO "\t%d "
+ "- Unicast addr %02x:%02x:%02x:%02x:%02x:"
+ "%02x\n", i + 1,
+ uc_ptr->da_addr[0], uc_ptr->da_addr[1],
+ uc_ptr->da_addr[2], uc_ptr->da_addr[3],
+ uc_ptr->da_addr[4], uc_ptr->da_addr[5]);
+ uc_ptr = uc_ptr->next;
+ }
+ }
+
+#ifdef FRAME_FILTER_DEBUG
+ /* Enable Receive all mode (to debug filtering_fail errors) */
+ value |= GMAC_FRAME_FILTER_RA;
+#endif
+ writel(value, ioaddr + GMAC_FRAME_FILTER);
+
+ DBG(KERN_INFO "\tFrame Filter reg: 0x%08x\n\tHash regs: "
+ "HI 0x%08x, LO 0x%08x\n", readl(ioaddr + GMAC_FRAME_FILTER),
+ readl(ioaddr + GMAC_HASH_HIGH), readl(ioaddr + GMAC_HASH_LOW));
+
+ return;
+}
+
+static void gmac_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
+ unsigned int fc, unsigned int pause_time)
+{
+ unsigned int flow = 0;
+
+ DBG(KERN_DEBUG "GMAC Flow-Control:\n");
+ if (fc & FLOW_RX) {
+ DBG(KERN_DEBUG "\tReceive Flow-Control ON\n");
+ flow |= GMAC_FLOW_CTRL_RFE;
+ }
+ if (fc & FLOW_TX) {
+ DBG(KERN_DEBUG "\tTransmit Flow-Control ON\n");
+ flow |= GMAC_FLOW_CTRL_TFE;
+ }
+
+ if (duplex) {
+ DBG(KERN_DEBUG "\tduplex mode: pause time: %d\n", pause_time);
+ flow |= (pause_time << GMAC_FLOW_CTRL_PT_SHIFT);
+ }
+
+ writel(flow, ioaddr + GMAC_FLOW_CTRL);
+ return;
+}
+
+static void gmac_pmt(unsigned long ioaddr, unsigned long mode)
+{
+ unsigned int pmt = 0;
+
+ if (mode == WAKE_MAGIC) {
+ DBG(KERN_DEBUG "GMAC: WOL Magic frame\n");
+ pmt |= power_down | magic_pkt_en;
+ } else if (mode == WAKE_UCAST) {
+ DBG(KERN_DEBUG "GMAC: WOL on global unicast\n");
+ pmt |= global_unicast;
+ }
+
+ writel(pmt, ioaddr + GMAC_PMT);
+ return;
+}
+
+static void gmac_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
+ int disable_rx_ic)
+{
+ int i;
+ for (i = 0; i < ring_size; i++) {
+ p->des01.erx.own = 1;
+ p->des01.erx.buffer1_size = BUF_SIZE_8KiB - 1;
+ /* To support jumbo frames */
+ p->des01.erx.buffer2_size = BUF_SIZE_8KiB - 1;
+ if (i == ring_size - 1)
+ p->des01.erx.end_ring = 1;
+ if (disable_rx_ic)
+ p->des01.erx.disable_ic = 1;
+ p++;
+ }
+ return;
+}
+
+static void gmac_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+ int i;
+
+ for (i = 0; i < ring_size; i++) {
+ p->des01.etx.own = 0;
+ if (i == ring_size - 1)
+ p->des01.etx.end_ring = 1;
+ p++;
+ }
+
+ return;
+}
+
+static int gmac_get_tx_owner(struct dma_desc *p)
+{
+ return p->des01.etx.own;
+}
+
+static int gmac_get_rx_owner(struct dma_desc *p)
+{
+ return p->des01.erx.own;
+}
+
+static void gmac_set_tx_owner(struct dma_desc *p)
+{
+ p->des01.etx.own = 1;
+}
+
+static void gmac_set_rx_owner(struct dma_desc *p)
+{
+ p->des01.erx.own = 1;
+}
+
+static int gmac_get_tx_ls(struct dma_desc *p)
+{
+ return p->des01.etx.last_segment;
+}
+
+static void gmac_release_tx_desc(struct dma_desc *p)
+{
+ int ter = p->des01.etx.end_ring;
+
+ memset(p, 0, sizeof(struct dma_desc));
+ p->des01.etx.end_ring = ter;
+
+ return;
+}
+
+static void gmac_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
+ int csum_flag)
+{
+ p->des01.etx.first_segment = is_fs;
+ if (unlikely(len > BUF_SIZE_4KiB)) {
+ p->des01.etx.buffer1_size = BUF_SIZE_4KiB;
+ p->des01.etx.buffer2_size = len - BUF_SIZE_4KiB;
+ } else {
+ p->des01.etx.buffer1_size = len;
+ }
+ if (likely(csum_flag))
+ p->des01.etx.checksum_insertion = cic_full;
+}
+
+static void gmac_clear_tx_ic(struct dma_desc *p)
+{
+ p->des01.etx.interrupt = 0;
+}
+
+static void gmac_close_tx_desc(struct dma_desc *p)
+{
+ p->des01.etx.last_segment = 1;
+ p->des01.etx.interrupt = 1;
+}
+
+static int gmac_get_rx_frame_len(struct dma_desc *p)
+{
+ return p->des01.erx.frame_length;
+}
+
+struct stmmac_ops gmac_driver = {
+ .core_init = gmac_core_init,
+ .dump_mac_regs = gmac_dump_regs,
+ .dma_init = gmac_dma_init,
+ .dump_dma_regs = gmac_dump_dma_regs,
+ .dma_mode = gmac_dma_operation_mode,
+ .dma_diagnostic_fr = gmac_dma_diagnostic_fr,
+ .tx_status = gmac_get_tx_frame_status,
+ .rx_status = gmac_get_rx_frame_status,
+ .get_tx_len = gmac_get_tx_len,
+ .set_filter = gmac_set_filter,
+ .flow_ctrl = gmac_flow_ctrl,
+ .pmt = gmac_pmt,
+ .init_rx_desc = gmac_init_rx_desc,
+ .init_tx_desc = gmac_init_tx_desc,
+ .get_tx_owner = gmac_get_tx_owner,
+ .get_rx_owner = gmac_get_rx_owner,
+ .release_tx_desc = gmac_release_tx_desc,
+ .prepare_tx_desc = gmac_prepare_tx_desc,
+ .clear_tx_ic = gmac_clear_tx_ic,
+ .close_tx_desc = gmac_close_tx_desc,
+ .get_tx_ls = gmac_get_tx_ls,
+ .set_tx_owner = gmac_set_tx_owner,
+ .set_rx_owner = gmac_set_rx_owner,
+ .get_rx_frame_len = gmac_get_rx_frame_len,
+ .host_irq_status = gmac_irq_status,
+ .set_umac_addr = gmac_set_umac_addr,
+ .get_umac_addr = gmac_get_umac_addr,
+};
+
+struct mac_device_info *gmac_setup(unsigned long ioaddr)
+{
+ struct mac_device_info *mac;
+ u32 uid = readl(ioaddr + GMAC_VERSION);
+
+ pr_info("\tGMAC - user ID: 0x%x, Synopsys ID: 0x%x\n",
+ ((uid & 0x0000ff00) >> 8), (uid & 0x000000ff));
+
+ mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
+
+ mac->ops = &gmac_driver;
+ mac->hw.pmt = PMT_SUPPORTED;
+ mac->hw.link.port = GMAC_CONTROL_PS;
+ mac->hw.link.duplex = GMAC_CONTROL_DM;
+ mac->hw.link.speed = GMAC_CONTROL_FES;
+ mac->hw.mii.addr = GMAC_MII_ADDR;
+ mac->hw.mii.data = GMAC_MII_DATA;
+
+ return mac;
+}
--- /dev/null
+/*******************************************************************************
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#define GMAC_CONTROL 0x00000000 /* Configuration */
+#define GMAC_FRAME_FILTER 0x00000004 /* Frame Filter */
+#define GMAC_HASH_HIGH 0x00000008 /* Multicast Hash Table High */
+#define GMAC_HASH_LOW 0x0000000c /* Multicast Hash Table Low */
+#define GMAC_MII_ADDR 0x00000010 /* MII Address */
+#define GMAC_MII_DATA 0x00000014 /* MII Data */
+#define GMAC_FLOW_CTRL 0x00000018 /* Flow Control */
+#define GMAC_VLAN_TAG 0x0000001c /* VLAN Tag */
+#define GMAC_VERSION 0x00000020 /* GMAC CORE Version */
+#define GMAC_WAKEUP_FILTER 0x00000028 /* Wake-up Frame Filter */
+
+#define GMAC_INT_STATUS 0x00000038 /* interrupt status register */
+enum gmac_irq_status {
+ time_stamp_irq = 0x0200,
+ mmc_rx_csum_offload_irq = 0x0080,
+ mmc_tx_irq = 0x0040,
+ mmc_rx_irq = 0x0020,
+ mmc_irq = 0x0010,
+ pmt_irq = 0x0008,
+ pcs_ane_irq = 0x0004,
+ pcs_link_irq = 0x0002,
+ rgmii_irq = 0x0001,
+};
+#define GMAC_INT_MASK 0x0000003c /* interrupt mask register */
+
+/* PMT Control and Status */
+#define GMAC_PMT 0x0000002c
+enum power_event {
+ pointer_reset = 0x80000000,
+ global_unicast = 0x00000200,
+ wake_up_rx_frame = 0x00000040,
+ magic_frame = 0x00000020,
+ wake_up_frame_en = 0x00000004,
+ magic_pkt_en = 0x00000002,
+ power_down = 0x00000001,
+};
+
+/* GMAC HW ADDR regs */
+#define GMAC_ADDR_HIGH(reg) (0x00000040+(reg * 8))
+#define GMAC_ADDR_LOW(reg) (0x00000044+(reg * 8))
+#define GMAC_MAX_UNICAST_ADDRESSES 16
+
+#define GMAC_AN_CTRL 0x000000c0 /* AN control */
+#define GMAC_AN_STATUS 0x000000c4 /* AN status */
+#define GMAC_ANE_ADV 0x000000c8 /* Auto-Neg. Advertisement */
+#define GMAC_ANE_LINK 0x000000cc /* Auto-Neg. link partener ability */
+#define GMAC_ANE_EXP 0x000000d0 /* ANE expansion */
+#define GMAC_TBI 0x000000d4 /* TBI extend status */
+#define GMAC_GMII_STATUS 0x000000d8 /* S/R-GMII status */
+
+/* GMAC Configuration defines */
+#define GMAC_CONTROL_TC 0x01000000 /* Transmit Conf. in RGMII/SGMII */
+#define GMAC_CONTROL_WD 0x00800000 /* Disable Watchdog on receive */
+#define GMAC_CONTROL_JD 0x00400000 /* Jabber disable */
+#define GMAC_CONTROL_BE 0x00200000 /* Frame Burst Enable */
+#define GMAC_CONTROL_JE 0x00100000 /* Jumbo frame */
+enum inter_frame_gap {
+ GMAC_CONTROL_IFG_88 = 0x00040000,
+ GMAC_CONTROL_IFG_80 = 0x00020000,
+ GMAC_CONTROL_IFG_40 = 0x000e0000,
+};
+#define GMAC_CONTROL_DCRS 0x00010000 /* Disable carrier sense during tx */
+#define GMAC_CONTROL_PS 0x00008000 /* Port Select 0:GMI 1:MII */
+#define GMAC_CONTROL_FES 0x00004000 /* Speed 0:10 1:100 */
+#define GMAC_CONTROL_DO 0x00002000 /* Disable Rx Own */
+#define GMAC_CONTROL_LM 0x00001000 /* Loop-back mode */
+#define GMAC_CONTROL_DM 0x00000800 /* Duplex Mode */
+#define GMAC_CONTROL_IPC 0x00000400 /* Checksum Offload */
+#define GMAC_CONTROL_DR 0x00000200 /* Disable Retry */
+#define GMAC_CONTROL_LUD 0x00000100 /* Link up/down */
+#define GMAC_CONTROL_ACS 0x00000080 /* Automatic Pad Stripping */
+#define GMAC_CONTROL_DC 0x00000010 /* Deferral Check */
+#define GMAC_CONTROL_TE 0x00000008 /* Transmitter Enable */
+#define GMAC_CONTROL_RE 0x00000004 /* Receiver Enable */
+
+#define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \
+ GMAC_CONTROL_IPC | GMAC_CONTROL_JE | GMAC_CONTROL_BE)
+
+/* GMAC Frame Filter defines */
+#define GMAC_FRAME_FILTER_PR 0x00000001 /* Promiscuous Mode */
+#define GMAC_FRAME_FILTER_HUC 0x00000002 /* Hash Unicast */
+#define GMAC_FRAME_FILTER_HMC 0x00000004 /* Hash Multicast */
+#define GMAC_FRAME_FILTER_DAIF 0x00000008 /* DA Inverse Filtering */
+#define GMAC_FRAME_FILTER_PM 0x00000010 /* Pass all multicast */
+#define GMAC_FRAME_FILTER_DBF 0x00000020 /* Disable Broadcast frames */
+#define GMAC_FRAME_FILTER_SAIF 0x00000100 /* Inverse Filtering */
+#define GMAC_FRAME_FILTER_SAF 0x00000200 /* Source Address Filter */
+#define GMAC_FRAME_FILTER_HPF 0x00000400 /* Hash or perfect Filter */
+#define GMAC_FRAME_FILTER_RA 0x80000000 /* Receive all mode */
+/* GMII ADDR defines */
+#define GMAC_MII_ADDR_WRITE 0x00000002 /* MII Write */
+#define GMAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */
+/* GMAC FLOW CTRL defines */
+#define GMAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */
+#define GMAC_FLOW_CTRL_PT_SHIFT 16
+#define GMAC_FLOW_CTRL_RFE 0x00000004 /* Rx Flow Control Enable */
+#define GMAC_FLOW_CTRL_TFE 0x00000002 /* Tx Flow Control Enable */
+#define GMAC_FLOW_CTRL_FCB_BPA 0x00000001 /* Flow Control Busy ... */
+
+/*--- DMA BLOCK defines ---*/
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */
+#define DMA_BUS_MODE_DA 0x00000002 /* Arbitration scheme */
+#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */
+/* Programmable burst length (passed thorugh platform)*/
+#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT 8
+
+enum rx_tx_priority_ratio {
+ double_ratio = 0x00004000, /*2:1 */
+ triple_ratio = 0x00008000, /*3:1 */
+ quadruple_ratio = 0x0000c000, /*4:1 */
+};
+
+#define DMA_BUS_MODE_FB 0x00010000 /* Fixed burst */
+#define DMA_BUS_MODE_RPBL_MASK 0x003e0000 /* Rx-Programmable Burst Len */
+#define DMA_BUS_MODE_RPBL_SHIFT 17
+#define DMA_BUS_MODE_USP 0x00800000
+#define DMA_BUS_MODE_4PBL 0x01000000
+#define DMA_BUS_MODE_AAL 0x02000000
+
+/* DMA CRS Control and Status Register Mapping */
+#define DMA_HOST_TX_DESC 0x00001048 /* Current Host Tx descriptor */
+#define DMA_HOST_RX_DESC 0x0000104c /* Current Host Rx descriptor */
+/* DMA Bus Mode register defines */
+#define DMA_BUS_PR_RATIO_MASK 0x0000c000 /* Rx/Tx priority ratio */
+#define DMA_BUS_PR_RATIO_SHIFT 14
+#define DMA_BUS_FB 0x00010000 /* Fixed Burst */
+
+/* DMA operation mode defines (start/stop tx/rx are placed in common header)*/
+#define DMA_CONTROL_DT 0x04000000 /* Disable Drop TCP/IP csum error */
+#define DMA_CONTROL_RSF 0x02000000 /* Receive Store and Forward */
+#define DMA_CONTROL_DFF 0x01000000 /* Disaable flushing */
+/* Theshold for Activating the FC */
+enum rfa {
+ act_full_minus_1 = 0x00800000,
+ act_full_minus_2 = 0x00800200,
+ act_full_minus_3 = 0x00800400,
+ act_full_minus_4 = 0x00800600,
+};
+/* Theshold for Deactivating the FC */
+enum rfd {
+ deac_full_minus_1 = 0x00400000,
+ deac_full_minus_2 = 0x00400800,
+ deac_full_minus_3 = 0x00401000,
+ deac_full_minus_4 = 0x00401800,
+};
+#define DMA_CONTROL_TSF 0x00200000 /* Transmit Store and Forward */
+#define DMA_CONTROL_FTF 0x00100000 /* Flush transmit FIFO */
+
+enum ttc_control {
+ DMA_CONTROL_TTC_64 = 0x00000000,
+ DMA_CONTROL_TTC_128 = 0x00004000,
+ DMA_CONTROL_TTC_192 = 0x00008000,
+ DMA_CONTROL_TTC_256 = 0x0000c000,
+ DMA_CONTROL_TTC_40 = 0x00010000,
+ DMA_CONTROL_TTC_32 = 0x00014000,
+ DMA_CONTROL_TTC_24 = 0x00018000,
+ DMA_CONTROL_TTC_16 = 0x0001c000,
+};
+#define DMA_CONTROL_TC_TX_MASK 0xfffe3fff
+
+#define DMA_CONTROL_EFC 0x00000100
+#define DMA_CONTROL_FEF 0x00000080
+#define DMA_CONTROL_FUF 0x00000040
+
+enum rtc_control {
+ DMA_CONTROL_RTC_64 = 0x00000000,
+ DMA_CONTROL_RTC_32 = 0x00000008,
+ DMA_CONTROL_RTC_96 = 0x00000010,
+ DMA_CONTROL_RTC_128 = 0x00000018,
+};
+#define DMA_CONTROL_TC_RX_MASK 0xffffffe7
+
+#define DMA_CONTROL_OSF 0x00000004 /* Operate on second frame */
+
+/* MMC registers offset */
+#define GMAC_MMC_CTRL 0x100
+#define GMAC_MMC_RX_INTR 0x104
+#define GMAC_MMC_TX_INTR 0x108
+#define GMAC_MMC_RX_CSUM_OFFLOAD 0x208
--- /dev/null
+/*******************************************************************************
+ This is the driver for the MAC 10/100 on-chip Ethernet controller
+ currently tested on all the ST boards based on STb7109 and stx7200 SoCs.
+
+ DWC Ether MAC 10/100 Universal version 4.0 has been used for developing
+ this code.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "common.h"
+#include "mac100.h"
+
+#undef MAC100_DEBUG
+/*#define MAC100_DEBUG*/
+#ifdef MAC100_DEBUG
+#define DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define DBG(fmt, args...) do { } while (0)
+#endif
+
+static void mac100_core_init(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CONTROL);
+
+ writel((value | MAC_CORE_INIT), ioaddr + MAC_CONTROL);
+
+#ifdef STMMAC_VLAN_TAG_USED
+ writel(ETH_P_8021Q, ioaddr + MAC_VLAN1);
+#endif
+ return;
+}
+
+static void mac100_dump_mac_regs(unsigned long ioaddr)
+{
+ pr_info("\t----------------------------------------------\n"
+ "\t MAC100 CSR (base addr = 0x%8x)\n"
+ "\t----------------------------------------------\n",
+ (unsigned int)ioaddr);
+ pr_info("\tcontrol reg (offset 0x%x): 0x%08x\n", MAC_CONTROL,
+ readl(ioaddr + MAC_CONTROL));
+ pr_info("\taddr HI (offset 0x%x): 0x%08x\n ", MAC_ADDR_HIGH,
+ readl(ioaddr + MAC_ADDR_HIGH));
+ pr_info("\taddr LO (offset 0x%x): 0x%08x\n", MAC_ADDR_LOW,
+ readl(ioaddr + MAC_ADDR_LOW));
+ pr_info("\tmulticast hash HI (offset 0x%x): 0x%08x\n",
+ MAC_HASH_HIGH, readl(ioaddr + MAC_HASH_HIGH));
+ pr_info("\tmulticast hash LO (offset 0x%x): 0x%08x\n",
+ MAC_HASH_LOW, readl(ioaddr + MAC_HASH_LOW));
+ pr_info("\tflow control (offset 0x%x): 0x%08x\n",
+ MAC_FLOW_CTRL, readl(ioaddr + MAC_FLOW_CTRL));
+ pr_info("\tVLAN1 tag (offset 0x%x): 0x%08x\n", MAC_VLAN1,
+ readl(ioaddr + MAC_VLAN1));
+ pr_info("\tVLAN2 tag (offset 0x%x): 0x%08x\n", MAC_VLAN2,
+ readl(ioaddr + MAC_VLAN2));
+ pr_info("\n\tMAC management counter registers\n");
+ pr_info("\t MMC crtl (offset 0x%x): 0x%08x\n",
+ MMC_CONTROL, readl(ioaddr + MMC_CONTROL));
+ pr_info("\t MMC High Interrupt (offset 0x%x): 0x%08x\n",
+ MMC_HIGH_INTR, readl(ioaddr + MMC_HIGH_INTR));
+ pr_info("\t MMC Low Interrupt (offset 0x%x): 0x%08x\n",
+ MMC_LOW_INTR, readl(ioaddr + MMC_LOW_INTR));
+ pr_info("\t MMC High Interrupt Mask (offset 0x%x): 0x%08x\n",
+ MMC_HIGH_INTR_MASK, readl(ioaddr + MMC_HIGH_INTR_MASK));
+ pr_info("\t MMC Low Interrupt Mask (offset 0x%x): 0x%08x\n",
+ MMC_LOW_INTR_MASK, readl(ioaddr + MMC_LOW_INTR_MASK));
+ return;
+}
+
+static int mac100_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx,
+ u32 dma_rx)
+{
+ u32 value = readl(ioaddr + DMA_BUS_MODE);
+ /* DMA SW reset */
+ value |= DMA_BUS_MODE_SFT_RESET;
+ writel(value, ioaddr + DMA_BUS_MODE);
+ do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
+
+ /* Enable Application Access by writing to DMA CSR0 */
+ writel(DMA_BUS_MODE_DEFAULT | (pbl << DMA_BUS_MODE_PBL_SHIFT),
+ ioaddr + DMA_BUS_MODE);
+
+ /* Mask interrupts by writing to CSR7 */
+ writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+
+ /* The base address of the RX/TX descriptor lists must be written into
+ * DMA CSR3 and CSR4, respectively. */
+ writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
+ writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
+
+ return 0;
+}
+
+/* Store and Forward capability is not used at all..
+ * The transmit threshold can be programmed by
+ * setting the TTC bits in the DMA control register.*/
+static void mac100_dma_operation_mode(unsigned long ioaddr, int txmode,
+ int rxmode)
+{
+ u32 csr6 = readl(ioaddr + DMA_CONTROL);
+
+ if (txmode <= 32)
+ csr6 |= DMA_CONTROL_TTC_32;
+ else if (txmode <= 64)
+ csr6 |= DMA_CONTROL_TTC_64;
+ else
+ csr6 |= DMA_CONTROL_TTC_128;
+
+ writel(csr6, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+static void mac100_dump_dma_regs(unsigned long ioaddr)
+{
+ int i;
+
+ DBG(KERN_DEBUG "MAC100 DMA CSR \n");
+ for (i = 0; i < 9; i++)
+ pr_debug("\t CSR%d (offset 0x%x): 0x%08x\n", i,
+ (DMA_BUS_MODE + i * 4),
+ readl(ioaddr + DMA_BUS_MODE + i * 4));
+ DBG(KERN_DEBUG "\t CSR20 (offset 0x%x): 0x%08x\n",
+ DMA_CUR_TX_BUF_ADDR, readl(ioaddr + DMA_CUR_TX_BUF_ADDR));
+ DBG(KERN_DEBUG "\t CSR21 (offset 0x%x): 0x%08x\n",
+ DMA_CUR_RX_BUF_ADDR, readl(ioaddr + DMA_CUR_RX_BUF_ADDR));
+ return;
+}
+
+/* DMA controller has two counters to track the number of
+ the receive missed frames. */
+static void mac100_dma_diagnostic_fr(void *data, struct stmmac_extra_stats *x,
+ unsigned long ioaddr)
+{
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+ u32 csr8 = readl(ioaddr + DMA_MISSED_FRAME_CTR);
+
+ if (unlikely(csr8)) {
+ if (csr8 & DMA_MISSED_FRAME_OVE) {
+ stats->rx_over_errors += 0x800;
+ x->rx_overflow_cntr += 0x800;
+ } else {
+ unsigned int ove_cntr;
+ ove_cntr = ((csr8 & DMA_MISSED_FRAME_OVE_CNTR) >> 17);
+ stats->rx_over_errors += ove_cntr;
+ x->rx_overflow_cntr += ove_cntr;
+ }
+
+ if (csr8 & DMA_MISSED_FRAME_OVE_M) {
+ stats->rx_missed_errors += 0xffff;
+ x->rx_missed_cntr += 0xffff;
+ } else {
+ unsigned int miss_f = (csr8 & DMA_MISSED_FRAME_M_CNTR);
+ stats->rx_missed_errors += miss_f;
+ x->rx_missed_cntr += miss_f;
+ }
+ }
+ return;
+}
+
+static int mac100_get_tx_frame_status(void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p, unsigned long ioaddr)
+{
+ int ret = 0;
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+
+ if (unlikely(p->des01.tx.error_summary)) {
+ if (unlikely(p->des01.tx.underflow_error)) {
+ x->tx_underflow++;
+ stats->tx_fifo_errors++;
+ }
+ if (unlikely(p->des01.tx.no_carrier)) {
+ x->tx_carrier++;
+ stats->tx_carrier_errors++;
+ }
+ if (unlikely(p->des01.tx.loss_carrier)) {
+ x->tx_losscarrier++;
+ stats->tx_carrier_errors++;
+ }
+ if (unlikely((p->des01.tx.excessive_deferral) ||
+ (p->des01.tx.excessive_collisions) ||
+ (p->des01.tx.late_collision)))
+ stats->collisions += p->des01.tx.collision_count;
+ ret = -1;
+ }
+ if (unlikely(p->des01.tx.heartbeat_fail)) {
+ x->tx_heartbeat++;
+ stats->tx_heartbeat_errors++;
+ ret = -1;
+ }
+ if (unlikely(p->des01.tx.deferred))
+ x->tx_deferred++;
+
+ return ret;
+}
+
+static int mac100_get_tx_len(struct dma_desc *p)
+{
+ return p->des01.tx.buffer1_size;
+}
+
+/* This function verifies if each incoming frame has some errors
+ * and, if required, updates the multicast statistics.
+ * In case of success, it returns csum_none becasue the device
+ * is not able to compute the csum in HW. */
+static int mac100_get_rx_frame_status(void *data, struct stmmac_extra_stats *x,
+ struct dma_desc *p)
+{
+ int ret = csum_none;
+ struct net_device_stats *stats = (struct net_device_stats *)data;
+
+ if (unlikely(p->des01.rx.last_descriptor == 0)) {
+ pr_warning("mac100 Error: Oversized Ethernet "
+ "frame spanned multiple buffers\n");
+ stats->rx_length_errors++;
+ return discard_frame;
+ }
+
+ if (unlikely(p->des01.rx.error_summary)) {
+ if (unlikely(p->des01.rx.descriptor_error))
+ x->rx_desc++;
+ if (unlikely(p->des01.rx.partial_frame_error))
+ x->rx_partial++;
+ if (unlikely(p->des01.rx.run_frame))
+ x->rx_runt++;
+ if (unlikely(p->des01.rx.frame_too_long))
+ x->rx_toolong++;
+ if (unlikely(p->des01.rx.collision)) {
+ x->rx_collision++;
+ stats->collisions++;
+ }
+ if (unlikely(p->des01.rx.crc_error)) {
+ x->rx_crc++;
+ stats->rx_crc_errors++;
+ }
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.rx.dribbling))
+ ret = discard_frame;
+
+ if (unlikely(p->des01.rx.length_error)) {
+ x->rx_lenght++;
+ ret = discard_frame;
+ }
+ if (unlikely(p->des01.rx.mii_error)) {
+ x->rx_mii++;
+ ret = discard_frame;
+ }
+ if (p->des01.rx.multicast_frame) {
+ x->rx_multicast++;
+ stats->multicast++;
+ }
+ return ret;
+}
+
+static void mac100_irq_status(unsigned long ioaddr)
+{
+ return;
+}
+
+static void mac100_set_umac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n)
+{
+ stmmac_set_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
+}
+
+static void mac100_get_umac_addr(unsigned long ioaddr, unsigned char *addr,
+ unsigned int reg_n)
+{
+ stmmac_get_mac_addr(ioaddr, addr, MAC_ADDR_HIGH, MAC_ADDR_LOW);
+}
+
+static void mac100_set_filter(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ u32 value = readl(ioaddr + MAC_CONTROL);
+
+ if (dev->flags & IFF_PROMISC) {
+ value |= MAC_CONTROL_PR;
+ value &= ~(MAC_CONTROL_PM | MAC_CONTROL_IF | MAC_CONTROL_HO |
+ MAC_CONTROL_HP);
+ } else if ((dev->mc_count > HASH_TABLE_SIZE)
+ || (dev->flags & IFF_ALLMULTI)) {
+ value |= MAC_CONTROL_PM;
+ value &= ~(MAC_CONTROL_PR | MAC_CONTROL_IF | MAC_CONTROL_HO);
+ writel(0xffffffff, ioaddr + MAC_HASH_HIGH);
+ writel(0xffffffff, ioaddr + MAC_HASH_LOW);
+ } else if (dev->mc_count == 0) { /* no multicast */
+ value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF |
+ MAC_CONTROL_HO | MAC_CONTROL_HP);
+ } else {
+ int i;
+ u32 mc_filter[2];
+ struct dev_mc_list *mclist;
+
+ /* Perfect filter mode for physical address and Hash
+ filter for multicast */
+ value |= MAC_CONTROL_HP;
+ value &= ~(MAC_CONTROL_PM | MAC_CONTROL_PR | MAC_CONTROL_IF
+ | MAC_CONTROL_HO);
+
+ memset(mc_filter, 0, sizeof(mc_filter));
+ for (i = 0, mclist = dev->mc_list;
+ mclist && i < dev->mc_count; i++, mclist = mclist->next) {
+ /* The upper 6 bits of the calculated CRC are used to
+ * index the contens of the hash table */
+ int bit_nr =
+ ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+ /* The most significant bit determines the register to
+ * use (H/L) while the other 5 bits determine the bit
+ * within the register. */
+ mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+ }
+ writel(mc_filter[0], ioaddr + MAC_HASH_LOW);
+ writel(mc_filter[1], ioaddr + MAC_HASH_HIGH);
+ }
+
+ writel(value, ioaddr + MAC_CONTROL);
+
+ DBG(KERN_INFO "%s: CTRL reg: 0x%08x Hash regs: "
+ "HI 0x%08x, LO 0x%08x\n",
+ __func__, readl(ioaddr + MAC_CONTROL),
+ readl(ioaddr + MAC_HASH_HIGH), readl(ioaddr + MAC_HASH_LOW));
+ return;
+}
+
+static void mac100_flow_ctrl(unsigned long ioaddr, unsigned int duplex,
+ unsigned int fc, unsigned int pause_time)
+{
+ unsigned int flow = MAC_FLOW_CTRL_ENABLE;
+
+ if (duplex)
+ flow |= (pause_time << MAC_FLOW_CTRL_PT_SHIFT);
+ writel(flow, ioaddr + MAC_FLOW_CTRL);
+
+ return;
+}
+
+/* No PMT module supported in our SoC for the Ethernet Controller. */
+static void mac100_pmt(unsigned long ioaddr, unsigned long mode)
+{
+ return;
+}
+
+static void mac100_init_rx_desc(struct dma_desc *p, unsigned int ring_size,
+ int disable_rx_ic)
+{
+ int i;
+ for (i = 0; i < ring_size; i++) {
+ p->des01.rx.own = 1;
+ p->des01.rx.buffer1_size = BUF_SIZE_2KiB - 1;
+ if (i == ring_size - 1)
+ p->des01.rx.end_ring = 1;
+ if (disable_rx_ic)
+ p->des01.rx.disable_ic = 1;
+ p++;
+ }
+ return;
+}
+
+static void mac100_init_tx_desc(struct dma_desc *p, unsigned int ring_size)
+{
+ int i;
+ for (i = 0; i < ring_size; i++) {
+ p->des01.tx.own = 0;
+ if (i == ring_size - 1)
+ p->des01.tx.end_ring = 1;
+ p++;
+ }
+ return;
+}
+
+static int mac100_get_tx_owner(struct dma_desc *p)
+{
+ return p->des01.tx.own;
+}
+
+static int mac100_get_rx_owner(struct dma_desc *p)
+{
+ return p->des01.rx.own;
+}
+
+static void mac100_set_tx_owner(struct dma_desc *p)
+{
+ p->des01.tx.own = 1;
+}
+
+static void mac100_set_rx_owner(struct dma_desc *p)
+{
+ p->des01.rx.own = 1;
+}
+
+static int mac100_get_tx_ls(struct dma_desc *p)
+{
+ return p->des01.tx.last_segment;
+}
+
+static void mac100_release_tx_desc(struct dma_desc *p)
+{
+ int ter = p->des01.tx.end_ring;
+
+ /* clean field used within the xmit */
+ p->des01.tx.first_segment = 0;
+ p->des01.tx.last_segment = 0;
+ p->des01.tx.buffer1_size = 0;
+
+ /* clean status reported */
+ p->des01.tx.error_summary = 0;
+ p->des01.tx.underflow_error = 0;
+ p->des01.tx.no_carrier = 0;
+ p->des01.tx.loss_carrier = 0;
+ p->des01.tx.excessive_deferral = 0;
+ p->des01.tx.excessive_collisions = 0;
+ p->des01.tx.late_collision = 0;
+ p->des01.tx.heartbeat_fail = 0;
+ p->des01.tx.deferred = 0;
+
+ /* set termination field */
+ p->des01.tx.end_ring = ter;
+
+ return;
+}
+
+static void mac100_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
+ int csum_flag)
+{
+ p->des01.tx.first_segment = is_fs;
+ p->des01.tx.buffer1_size = len;
+}
+
+static void mac100_clear_tx_ic(struct dma_desc *p)
+{
+ p->des01.tx.interrupt = 0;
+}
+
+static void mac100_close_tx_desc(struct dma_desc *p)
+{
+ p->des01.tx.last_segment = 1;
+ p->des01.tx.interrupt = 1;
+}
+
+static int mac100_get_rx_frame_len(struct dma_desc *p)
+{
+ return p->des01.rx.frame_length;
+}
+
+struct stmmac_ops mac100_driver = {
+ .core_init = mac100_core_init,
+ .dump_mac_regs = mac100_dump_mac_regs,
+ .dma_init = mac100_dma_init,
+ .dump_dma_regs = mac100_dump_dma_regs,
+ .dma_mode = mac100_dma_operation_mode,
+ .dma_diagnostic_fr = mac100_dma_diagnostic_fr,
+ .tx_status = mac100_get_tx_frame_status,
+ .rx_status = mac100_get_rx_frame_status,
+ .get_tx_len = mac100_get_tx_len,
+ .set_filter = mac100_set_filter,
+ .flow_ctrl = mac100_flow_ctrl,
+ .pmt = mac100_pmt,
+ .init_rx_desc = mac100_init_rx_desc,
+ .init_tx_desc = mac100_init_tx_desc,
+ .get_tx_owner = mac100_get_tx_owner,
+ .get_rx_owner = mac100_get_rx_owner,
+ .release_tx_desc = mac100_release_tx_desc,
+ .prepare_tx_desc = mac100_prepare_tx_desc,
+ .clear_tx_ic = mac100_clear_tx_ic,
+ .close_tx_desc = mac100_close_tx_desc,
+ .get_tx_ls = mac100_get_tx_ls,
+ .set_tx_owner = mac100_set_tx_owner,
+ .set_rx_owner = mac100_set_rx_owner,
+ .get_rx_frame_len = mac100_get_rx_frame_len,
+ .host_irq_status = mac100_irq_status,
+ .set_umac_addr = mac100_set_umac_addr,
+ .get_umac_addr = mac100_get_umac_addr,
+};
+
+struct mac_device_info *mac100_setup(unsigned long ioaddr)
+{
+ struct mac_device_info *mac;
+
+ mac = kzalloc(sizeof(const struct mac_device_info), GFP_KERNEL);
+
+ pr_info("\tMAC 10/100\n");
+
+ mac->ops = &mac100_driver;
+ mac->hw.pmt = PMT_NOT_SUPPORTED;
+ mac->hw.link.port = MAC_CONTROL_PS;
+ mac->hw.link.duplex = MAC_CONTROL_F;
+ mac->hw.link.speed = 0;
+ mac->hw.mii.addr = MAC_MII_ADDR;
+ mac->hw.mii.data = MAC_MII_DATA;
+
+ return mac;
+}
--- /dev/null
+/*******************************************************************************
+ MAC 10/100 Header File
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+/*----------------------------------------------------------------------------
+ * MAC BLOCK defines
+ *---------------------------------------------------------------------------*/
+/* MAC CSR offset */
+#define MAC_CONTROL 0x00000000 /* MAC Control */
+#define MAC_ADDR_HIGH 0x00000004 /* MAC Address High */
+#define MAC_ADDR_LOW 0x00000008 /* MAC Address Low */
+#define MAC_HASH_HIGH 0x0000000c /* Multicast Hash Table High */
+#define MAC_HASH_LOW 0x00000010 /* Multicast Hash Table Low */
+#define MAC_MII_ADDR 0x00000014 /* MII Address */
+#define MAC_MII_DATA 0x00000018 /* MII Data */
+#define MAC_FLOW_CTRL 0x0000001c /* Flow Control */
+#define MAC_VLAN1 0x00000020 /* VLAN1 Tag */
+#define MAC_VLAN2 0x00000024 /* VLAN2 Tag */
+
+/* MAC CTRL defines */
+#define MAC_CONTROL_RA 0x80000000 /* Receive All Mode */
+#define MAC_CONTROL_BLE 0x40000000 /* Endian Mode */
+#define MAC_CONTROL_HBD 0x10000000 /* Heartbeat Disable */
+#define MAC_CONTROL_PS 0x08000000 /* Port Select */
+#define MAC_CONTROL_DRO 0x00800000 /* Disable Receive Own */
+#define MAC_CONTROL_EXT_LOOPBACK 0x00400000 /* Reserved (ext loopback?) */
+#define MAC_CONTROL_OM 0x00200000 /* Loopback Operating Mode */
+#define MAC_CONTROL_F 0x00100000 /* Full Duplex Mode */
+#define MAC_CONTROL_PM 0x00080000 /* Pass All Multicast */
+#define MAC_CONTROL_PR 0x00040000 /* Promiscuous Mode */
+#define MAC_CONTROL_IF 0x00020000 /* Inverse Filtering */
+#define MAC_CONTROL_PB 0x00010000 /* Pass Bad Frames */
+#define MAC_CONTROL_HO 0x00008000 /* Hash Only Filtering Mode */
+#define MAC_CONTROL_HP 0x00002000 /* Hash/Perfect Filtering Mode */
+#define MAC_CONTROL_LCC 0x00001000 /* Late Collision Control */
+#define MAC_CONTROL_DBF 0x00000800 /* Disable Broadcast Frames */
+#define MAC_CONTROL_DRTY 0x00000400 /* Disable Retry */
+#define MAC_CONTROL_ASTP 0x00000100 /* Automatic Pad Stripping */
+#define MAC_CONTROL_BOLMT_10 0x00000000 /* Back Off Limit 10 */
+#define MAC_CONTROL_BOLMT_8 0x00000040 /* Back Off Limit 8 */
+#define MAC_CONTROL_BOLMT_4 0x00000080 /* Back Off Limit 4 */
+#define MAC_CONTROL_BOLMT_1 0x000000c0 /* Back Off Limit 1 */
+#define MAC_CONTROL_DC 0x00000020 /* Deferral Check */
+#define MAC_CONTROL_TE 0x00000008 /* Transmitter Enable */
+#define MAC_CONTROL_RE 0x00000004 /* Receiver Enable */
+
+#define MAC_CORE_INIT (MAC_CONTROL_HBD | MAC_CONTROL_ASTP)
+
+/* MAC FLOW CTRL defines */
+#define MAC_FLOW_CTRL_PT_MASK 0xffff0000 /* Pause Time Mask */
+#define MAC_FLOW_CTRL_PT_SHIFT 16
+#define MAC_FLOW_CTRL_PASS 0x00000004 /* Pass Control Frames */
+#define MAC_FLOW_CTRL_ENABLE 0x00000002 /* Flow Control Enable */
+#define MAC_FLOW_CTRL_PAUSE 0x00000001 /* Flow Control Busy ... */
+
+/* MII ADDR defines */
+#define MAC_MII_ADDR_WRITE 0x00000002 /* MII Write */
+#define MAC_MII_ADDR_BUSY 0x00000001 /* MII Busy */
+
+/*----------------------------------------------------------------------------
+ * DMA BLOCK defines
+ *---------------------------------------------------------------------------*/
+
+/* DMA Bus Mode register defines */
+#define DMA_BUS_MODE_DBO 0x00100000 /* Descriptor Byte Ordering */
+#define DMA_BUS_MODE_BLE 0x00000080 /* Big Endian/Little Endian */
+#define DMA_BUS_MODE_PBL_MASK 0x00003f00 /* Programmable Burst Len */
+#define DMA_BUS_MODE_PBL_SHIFT 8
+#define DMA_BUS_MODE_DSL_MASK 0x0000007c /* Descriptor Skip Length */
+#define DMA_BUS_MODE_DSL_SHIFT 2 /* (in DWORDS) */
+#define DMA_BUS_MODE_BAR_BUS 0x00000002 /* Bar-Bus Arbitration */
+#define DMA_BUS_MODE_SFT_RESET 0x00000001 /* Software Reset */
+#define DMA_BUS_MODE_DEFAULT 0x00000000
+
+/* DMA Control register defines */
+#define DMA_CONTROL_SF 0x00200000 /* Store And Forward */
+
+/* Transmit Threshold Control */
+enum ttc_control {
+ DMA_CONTROL_TTC_DEFAULT = 0x00000000, /* Threshold is 32 DWORDS */
+ DMA_CONTROL_TTC_64 = 0x00004000, /* Threshold is 64 DWORDS */
+ DMA_CONTROL_TTC_128 = 0x00008000, /* Threshold is 128 DWORDS */
+ DMA_CONTROL_TTC_256 = 0x0000c000, /* Threshold is 256 DWORDS */
+ DMA_CONTROL_TTC_18 = 0x00400000, /* Threshold is 18 DWORDS */
+ DMA_CONTROL_TTC_24 = 0x00404000, /* Threshold is 24 DWORDS */
+ DMA_CONTROL_TTC_32 = 0x00408000, /* Threshold is 32 DWORDS */
+ DMA_CONTROL_TTC_40 = 0x0040c000, /* Threshold is 40 DWORDS */
+ DMA_CONTROL_SE = 0x00000008, /* Stop On Empty */
+ DMA_CONTROL_OSF = 0x00000004, /* Operate On 2nd Frame */
+};
+
+/* STMAC110 DMA Missed Frame Counter register defines */
+#define DMA_MISSED_FRAME_OVE 0x10000000 /* FIFO Overflow Overflow */
+#define DMA_MISSED_FRAME_OVE_CNTR 0x0ffe0000 /* Overflow Frame Counter */
+#define DMA_MISSED_FRAME_OVE_M 0x00010000 /* Missed Frame Overflow */
+#define DMA_MISSED_FRAME_M_CNTR 0x0000ffff /* Missed Frame Couinter */
--- /dev/null
+/*******************************************************************************
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#define DRV_MODULE_VERSION "Oct_09"
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+#define STMMAC_VLAN_TAG_USED
+#include <linux/if_vlan.h>
+#endif
+
+#include "common.h"
+#ifdef CONFIG_STMMAC_TIMER
+#include "stmmac_timer.h"
+#endif
+
+struct stmmac_priv {
+ /* Frequently used values are kept adjacent for cache effect */
+ struct dma_desc *dma_tx ____cacheline_aligned;
+ dma_addr_t dma_tx_phy;
+ struct sk_buff **tx_skbuff;
+ unsigned int cur_tx;
+ unsigned int dirty_tx;
+ unsigned int dma_tx_size;
+ int tx_coe;
+ int tx_coalesce;
+
+ struct dma_desc *dma_rx ;
+ unsigned int cur_rx;
+ unsigned int dirty_rx;
+ struct sk_buff **rx_skbuff;
+ dma_addr_t *rx_skbuff_dma;
+ struct sk_buff_head rx_recycle;
+
+ struct net_device *dev;
+ int is_gmac;
+ dma_addr_t dma_rx_phy;
+ unsigned int dma_rx_size;
+ int rx_csum;
+ unsigned int dma_buf_sz;
+ struct device *device;
+ struct mac_device_info *mac_type;
+
+ struct stmmac_extra_stats xstats;
+ struct napi_struct napi;
+
+ phy_interface_t phy_interface;
+ int pbl;
+ int bus_id;
+ int phy_addr;
+ int phy_mask;
+ int (*phy_reset) (void *priv);
+ void (*fix_mac_speed) (void *priv, unsigned int speed);
+ void *bsp_priv;
+
+ int phy_irq;
+ struct phy_device *phydev;
+ int oldlink;
+ int speed;
+ int oldduplex;
+ unsigned int flow_ctrl;
+ unsigned int pause;
+ struct mii_bus *mii;
+
+ u32 msg_enable;
+ spinlock_t lock;
+ int wolopts;
+ int wolenabled;
+ int shutdown;
+#ifdef CONFIG_STMMAC_TIMER
+ struct stmmac_timer *tm;
+#endif
+#ifdef STMMAC_VLAN_TAG_USED
+ struct vlan_group *vlgrp;
+#endif
+};
+
+extern int stmmac_mdio_unregister(struct net_device *ndev);
+extern int stmmac_mdio_register(struct net_device *ndev);
+extern void stmmac_set_ethtool_ops(struct net_device *netdev);
--- /dev/null
+/*******************************************************************************
+ STMMAC Ethtool support
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+
+#define REG_SPACE_SIZE 0x1054
+#define MAC100_ETHTOOL_NAME "st_mac100"
+#define GMAC_ETHTOOL_NAME "st_gmac"
+
+struct stmmac_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define STMMAC_STAT(m) \
+ { #m, FIELD_SIZEOF(struct stmmac_extra_stats, m), \
+ offsetof(struct stmmac_priv, xstats.m)}
+
+static const struct stmmac_stats stmmac_gstrings_stats[] = {
+ STMMAC_STAT(tx_underflow),
+ STMMAC_STAT(tx_carrier),
+ STMMAC_STAT(tx_losscarrier),
+ STMMAC_STAT(tx_heartbeat),
+ STMMAC_STAT(tx_deferred),
+ STMMAC_STAT(tx_vlan),
+ STMMAC_STAT(rx_vlan),
+ STMMAC_STAT(tx_jabber),
+ STMMAC_STAT(tx_frame_flushed),
+ STMMAC_STAT(tx_payload_error),
+ STMMAC_STAT(tx_ip_header_error),
+ STMMAC_STAT(rx_desc),
+ STMMAC_STAT(rx_partial),
+ STMMAC_STAT(rx_runt),
+ STMMAC_STAT(rx_toolong),
+ STMMAC_STAT(rx_collision),
+ STMMAC_STAT(rx_crc),
+ STMMAC_STAT(rx_lenght),
+ STMMAC_STAT(rx_mii),
+ STMMAC_STAT(rx_multicast),
+ STMMAC_STAT(rx_gmac_overflow),
+ STMMAC_STAT(rx_watchdog),
+ STMMAC_STAT(da_rx_filter_fail),
+ STMMAC_STAT(sa_rx_filter_fail),
+ STMMAC_STAT(rx_missed_cntr),
+ STMMAC_STAT(rx_overflow_cntr),
+ STMMAC_STAT(tx_undeflow_irq),
+ STMMAC_STAT(tx_process_stopped_irq),
+ STMMAC_STAT(tx_jabber_irq),
+ STMMAC_STAT(rx_overflow_irq),
+ STMMAC_STAT(rx_buf_unav_irq),
+ STMMAC_STAT(rx_process_stopped_irq),
+ STMMAC_STAT(rx_watchdog_irq),
+ STMMAC_STAT(tx_early_irq),
+ STMMAC_STAT(fatal_bus_error_irq),
+ STMMAC_STAT(threshold),
+ STMMAC_STAT(tx_pkt_n),
+ STMMAC_STAT(rx_pkt_n),
+ STMMAC_STAT(poll_n),
+ STMMAC_STAT(sched_timer_n),
+ STMMAC_STAT(normal_irq_n),
+};
+#define STMMAC_STATS_LEN ARRAY_SIZE(stmmac_gstrings_stats)
+
+void stmmac_ethtool_getdrvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (!priv->is_gmac)
+ strcpy(info->driver, MAC100_ETHTOOL_NAME);
+ else
+ strcpy(info->driver, GMAC_ETHTOOL_NAME);
+
+ strcpy(info->version, DRV_MODULE_VERSION);
+ info->fw_version[0] = '\0';
+ info->n_stats = STMMAC_STATS_LEN;
+ return;
+}
+
+int stmmac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phy = priv->phydev;
+ int rc;
+ if (phy == NULL) {
+ pr_err("%s: %s: PHY is not registered\n",
+ __func__, dev->name);
+ return -ENODEV;
+ }
+ if (!netif_running(dev)) {
+ pr_err("%s: interface is disabled: we cannot track "
+ "link speed / duplex setting\n", dev->name);
+ return -EBUSY;
+ }
+ cmd->transceiver = XCVR_INTERNAL;
+ spin_lock_irq(&priv->lock);
+ rc = phy_ethtool_gset(phy, cmd);
+ spin_unlock_irq(&priv->lock);
+ return rc;
+}
+
+int stmmac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phy = priv->phydev;
+ int rc;
+
+ spin_lock(&priv->lock);
+ rc = phy_ethtool_sset(phy, cmd);
+ spin_unlock(&priv->lock);
+
+ return rc;
+}
+
+u32 stmmac_ethtool_getmsglevel(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ return priv->msg_enable;
+}
+
+void stmmac_ethtool_setmsglevel(struct net_device *dev, u32 level)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ priv->msg_enable = level;
+
+}
+
+int stmmac_check_if_running(struct net_device *dev)
+{
+ if (!netif_running(dev))
+ return -EBUSY;
+ return 0;
+}
+
+int stmmac_ethtool_get_regs_len(struct net_device *dev)
+{
+ return REG_SPACE_SIZE;
+}
+
+void stmmac_ethtool_gregs(struct net_device *dev,
+ struct ethtool_regs *regs, void *space)
+{
+ int i;
+ u32 *reg_space = (u32 *) space;
+
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ memset(reg_space, 0x0, REG_SPACE_SIZE);
+
+ if (!priv->is_gmac) {
+ /* MAC registers */
+ for (i = 0; i < 12; i++)
+ reg_space[i] = readl(dev->base_addr + (i * 4));
+ /* DMA registers */
+ for (i = 0; i < 9; i++)
+ reg_space[i + 12] =
+ readl(dev->base_addr + (DMA_BUS_MODE + (i * 4)));
+ reg_space[22] = readl(dev->base_addr + DMA_CUR_TX_BUF_ADDR);
+ reg_space[23] = readl(dev->base_addr + DMA_CUR_RX_BUF_ADDR);
+ } else {
+ /* MAC registers */
+ for (i = 0; i < 55; i++)
+ reg_space[i] = readl(dev->base_addr + (i * 4));
+ /* DMA registers */
+ for (i = 0; i < 22; i++)
+ reg_space[i + 55] =
+ readl(dev->base_addr + (DMA_BUS_MODE + (i * 4)));
+ }
+
+ return;
+}
+
+int stmmac_ethtool_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+u32 stmmac_ethtool_get_rx_csum(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ return priv->rx_csum;
+}
+
+static void
+stmmac_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct stmmac_priv *priv = netdev_priv(netdev);
+
+ spin_lock(&priv->lock);
+
+ pause->rx_pause = 0;
+ pause->tx_pause = 0;
+ pause->autoneg = priv->phydev->autoneg;
+
+ if (priv->flow_ctrl & FLOW_RX)
+ pause->rx_pause = 1;
+ if (priv->flow_ctrl & FLOW_TX)
+ pause->tx_pause = 1;
+
+ spin_unlock(&priv->lock);
+ return;
+}
+
+static int
+stmmac_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct stmmac_priv *priv = netdev_priv(netdev);
+ struct phy_device *phy = priv->phydev;
+ int new_pause = FLOW_OFF;
+ int ret = 0;
+
+ spin_lock(&priv->lock);
+
+ if (pause->rx_pause)
+ new_pause |= FLOW_RX;
+ if (pause->tx_pause)
+ new_pause |= FLOW_TX;
+
+ priv->flow_ctrl = new_pause;
+
+ if (phy->autoneg) {
+ if (netif_running(netdev)) {
+ struct ethtool_cmd cmd;
+ /* auto-negotiation automatically restarted */
+ cmd.cmd = ETHTOOL_NWAY_RST;
+ cmd.supported = phy->supported;
+ cmd.advertising = phy->advertising;
+ cmd.autoneg = phy->autoneg;
+ cmd.speed = phy->speed;
+ cmd.duplex = phy->duplex;
+ cmd.phy_address = phy->addr;
+ ret = phy_ethtool_sset(phy, &cmd);
+ }
+ } else {
+ unsigned long ioaddr = netdev->base_addr;
+ priv->mac_type->ops->flow_ctrl(ioaddr, phy->duplex,
+ priv->flow_ctrl, priv->pause);
+ }
+ spin_unlock(&priv->lock);
+ return ret;
+}
+
+static void stmmac_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *dummy, u64 *data)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int i;
+
+ /* Update HW stats if supported */
+ priv->mac_type->ops->dma_diagnostic_fr(&dev->stats, &priv->xstats,
+ ioaddr);
+
+ for (i = 0; i < STMMAC_STATS_LEN; i++) {
+ char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset;
+ data[i] = (stmmac_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? (*(u64 *)p) : (*(u32 *)p);
+ }
+
+ return;
+}
+
+static int stmmac_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return STMMAC_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void stmmac_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ int i;
+ u8 *p = data;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < STMMAC_STATS_LEN; i++) {
+ memcpy(p, stmmac_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+ return;
+}
+
+/* Currently only support WOL through Magic packet. */
+static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ spin_lock_irq(&priv->lock);
+ if (priv->wolenabled == PMT_SUPPORTED) {
+ wol->supported = WAKE_MAGIC;
+ wol->wolopts = priv->wolopts;
+ }
+ spin_unlock_irq(&priv->lock);
+}
+
+static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ u32 support = WAKE_MAGIC;
+
+ if (priv->wolenabled == PMT_NOT_SUPPORTED)
+ return -EINVAL;
+
+ if (wol->wolopts & ~support)
+ return -EINVAL;
+
+ if (wol->wolopts == 0)
+ device_set_wakeup_enable(priv->device, 0);
+ else
+ device_set_wakeup_enable(priv->device, 1);
+
+ spin_lock_irq(&priv->lock);
+ priv->wolopts = wol->wolopts;
+ spin_unlock_irq(&priv->lock);
+
+ return 0;
+}
+
+static struct ethtool_ops stmmac_ethtool_ops = {
+ .begin = stmmac_check_if_running,
+ .get_drvinfo = stmmac_ethtool_getdrvinfo,
+ .get_settings = stmmac_ethtool_getsettings,
+ .set_settings = stmmac_ethtool_setsettings,
+ .get_msglevel = stmmac_ethtool_getmsglevel,
+ .set_msglevel = stmmac_ethtool_setmsglevel,
+ .get_regs = stmmac_ethtool_gregs,
+ .get_regs_len = stmmac_ethtool_get_regs_len,
+ .get_link = ethtool_op_get_link,
+ .get_rx_csum = stmmac_ethtool_get_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = stmmac_ethtool_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_pauseparam = stmmac_get_pauseparam,
+ .set_pauseparam = stmmac_set_pauseparam,
+ .get_ethtool_stats = stmmac_get_ethtool_stats,
+ .get_strings = stmmac_get_strings,
+ .get_wol = stmmac_get_wol,
+ .set_wol = stmmac_set_wol,
+ .get_sset_count = stmmac_get_sset_count,
+#ifdef NETIF_F_TSO
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+#endif
+};
+
+void stmmac_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &stmmac_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+ This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
+ ST Ethernet IPs are built around a Synopsys IP Core.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+
+ Documentation available at:
+ http://www.stlinux.com
+ Support available at:
+ https://bugzilla.stlinux.com/
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/if_ether.h>
+#include <linux/crc32.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/if_vlan.h>
+#include <linux/dma-mapping.h>
+#include <linux/stm/soc.h>
+#include "stmmac.h"
+
+#define STMMAC_RESOURCE_NAME "stmmaceth"
+#define PHY_RESOURCE_NAME "stmmacphy"
+
+#undef STMMAC_DEBUG
+/*#define STMMAC_DEBUG*/
+#ifdef STMMAC_DEBUG
+#define DBG(nlevel, klevel, fmt, args...) \
+ ((void)(netif_msg_##nlevel(priv) && \
+ printk(KERN_##klevel fmt, ## args)))
+#else
+#define DBG(nlevel, klevel, fmt, args...) do { } while (0)
+#endif
+
+#undef STMMAC_RX_DEBUG
+/*#define STMMAC_RX_DEBUG*/
+#ifdef STMMAC_RX_DEBUG
+#define RX_DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define RX_DBG(fmt, args...) do { } while (0)
+#endif
+
+#undef STMMAC_XMIT_DEBUG
+/*#define STMMAC_XMIT_DEBUG*/
+#ifdef STMMAC_TX_DEBUG
+#define TX_DBG(fmt, args...) printk(fmt, ## args)
+#else
+#define TX_DBG(fmt, args...) do { } while (0)
+#endif
+
+#define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
+#define JUMBO_LEN 9000
+
+/* Module parameters */
+#define TX_TIMEO 5000 /* default 5 seconds */
+static int watchdog = TX_TIMEO;
+module_param(watchdog, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(watchdog, "Transmit timeout in milliseconds");
+
+static int debug = -1; /* -1: default, 0: no output, 16: all */
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Message Level (0: no output, 16: all)");
+
+static int phyaddr = -1;
+module_param(phyaddr, int, S_IRUGO);
+MODULE_PARM_DESC(phyaddr, "Physical device address");
+
+#define DMA_TX_SIZE 256
+static int dma_txsize = DMA_TX_SIZE;
+module_param(dma_txsize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_txsize, "Number of descriptors in the TX list");
+
+#define DMA_RX_SIZE 256
+static int dma_rxsize = DMA_RX_SIZE;
+module_param(dma_rxsize, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(dma_rxsize, "Number of descriptors in the RX list");
+
+static int flow_ctrl = FLOW_OFF;
+module_param(flow_ctrl, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(flow_ctrl, "Flow control ability [on/off]");
+
+static int pause = PAUSE_TIME;
+module_param(pause, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(pause, "Flow Control Pause Time");
+
+#define TC_DEFAULT 64
+static int tc = TC_DEFAULT;
+module_param(tc, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tc, "DMA threshold control value");
+
+#define RX_NO_COALESCE 1 /* Always interrupt on completion */
+#define TX_NO_COALESCE -1 /* No moderation by default */
+
+/* Pay attention to tune this parameter; take care of both
+ * hardware capability and network stabitily/performance impact.
+ * Many tests showed that ~4ms latency seems to be good enough. */
+#ifdef CONFIG_STMMAC_TIMER
+#define DEFAULT_PERIODIC_RATE 256
+static int tmrate = DEFAULT_PERIODIC_RATE;
+module_param(tmrate, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tmrate, "External timer freq. (default: 256Hz)");
+#endif
+
+#define DMA_BUFFER_SIZE BUF_SIZE_2KiB
+static int buf_sz = DMA_BUFFER_SIZE;
+module_param(buf_sz, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(buf_sz, "DMA buffer size");
+
+/* In case of Giga ETH, we can enable/disable the COE for the
+ * transmit HW checksum computation.
+ * Note that, if tx csum is off in HW, SG will be still supported. */
+static int tx_coe = HW_CSUM;
+module_param(tx_coe, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]");
+
+static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE |
+ NETIF_MSG_LINK | NETIF_MSG_IFUP |
+ NETIF_MSG_IFDOWN | NETIF_MSG_TIMER);
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev);
+
+/**
+ * stmmac_verify_args - verify the driver parameters.
+ * Description: it verifies if some wrong parameter is passed to the driver.
+ * Note that wrong parameters are replaced with the default values.
+ */
+static void stmmac_verify_args(void)
+{
+ if (unlikely(watchdog < 0))
+ watchdog = TX_TIMEO;
+ if (unlikely(dma_rxsize < 0))
+ dma_rxsize = DMA_RX_SIZE;
+ if (unlikely(dma_txsize < 0))
+ dma_txsize = DMA_TX_SIZE;
+ if (unlikely((buf_sz < DMA_BUFFER_SIZE) || (buf_sz > BUF_SIZE_16KiB)))
+ buf_sz = DMA_BUFFER_SIZE;
+ if (unlikely(flow_ctrl > 1))
+ flow_ctrl = FLOW_AUTO;
+ else if (likely(flow_ctrl < 0))
+ flow_ctrl = FLOW_OFF;
+ if (unlikely((pause < 0) || (pause > 0xffff)))
+ pause = PAUSE_TIME;
+
+ return;
+}
+
+#if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG)
+static void print_pkt(unsigned char *buf, int len)
+{
+ int j;
+ pr_info("len = %d byte, buf addr: 0x%p", len, buf);
+ for (j = 0; j < len; j++) {
+ if ((j % 16) == 0)
+ pr_info("\n %03x:", j);
+ pr_info(" %02x", buf[j]);
+ }
+ pr_info("\n");
+ return;
+}
+#endif
+
+/* minimum number of free TX descriptors required to wake up TX process */
+#define STMMAC_TX_THRESH(x) (x->dma_tx_size/4)
+
+static inline u32 stmmac_tx_avail(struct stmmac_priv *priv)
+{
+ return priv->dirty_tx + priv->dma_tx_size - priv->cur_tx - 1;
+}
+
+/**
+ * stmmac_adjust_link
+ * @dev: net device structure
+ * Description: it adjusts the link parameters.
+ */
+static void stmmac_adjust_link(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = priv->phydev;
+ unsigned long ioaddr = dev->base_addr;
+ unsigned long flags;
+ int new_state = 0;
+ unsigned int fc = priv->flow_ctrl, pause_time = priv->pause;
+
+ if (phydev == NULL)
+ return;
+
+ DBG(probe, DEBUG, "stmmac_adjust_link: called. address %d link %d\n",
+ phydev->addr, phydev->link);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (phydev->link) {
+ u32 ctrl = readl(ioaddr + MAC_CTRL_REG);
+
+ /* Now we make sure that we can be in full duplex mode.
+ * If not, we operate in half-duplex mode. */
+ if (phydev->duplex != priv->oldduplex) {
+ new_state = 1;
+ if (!(phydev->duplex))
+ ctrl &= ~priv->mac_type->hw.link.duplex;
+ else
+ ctrl |= priv->mac_type->hw.link.duplex;
+ priv->oldduplex = phydev->duplex;
+ }
+ /* Flow Control operation */
+ if (phydev->pause)
+ priv->mac_type->ops->flow_ctrl(ioaddr, phydev->duplex,
+ fc, pause_time);
+
+ if (phydev->speed != priv->speed) {
+ new_state = 1;
+ switch (phydev->speed) {
+ case 1000:
+ if (likely(priv->is_gmac))
+ ctrl &= ~priv->mac_type->hw.link.port;
+ break;
+ case 100:
+ case 10:
+ if (priv->is_gmac) {
+ ctrl |= priv->mac_type->hw.link.port;
+ if (phydev->speed == SPEED_100) {
+ ctrl |=
+ priv->mac_type->hw.link.
+ speed;
+ } else {
+ ctrl &=
+ ~(priv->mac_type->hw.
+ link.speed);
+ }
+ } else {
+ ctrl &= ~priv->mac_type->hw.link.port;
+ }
+ priv->fix_mac_speed(priv->bsp_priv,
+ phydev->speed);
+ break;
+ default:
+ if (netif_msg_link(priv))
+ pr_warning("%s: Speed (%d) is not 10"
+ " or 100!\n", dev->name, phydev->speed);
+ break;
+ }
+
+ priv->speed = phydev->speed;
+ }
+
+ writel(ctrl, ioaddr + MAC_CTRL_REG);
+
+ if (!priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 1;
+ }
+ } else if (priv->oldlink) {
+ new_state = 1;
+ priv->oldlink = 0;
+ priv->speed = 0;
+ priv->oldduplex = -1;
+ }
+
+ if (new_state && netif_msg_link(priv))
+ phy_print_status(phydev);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ DBG(probe, DEBUG, "stmmac_adjust_link: exiting\n");
+}
+
+/**
+ * stmmac_init_phy - PHY initialization
+ * @dev: net device structure
+ * Description: it initializes the driver's PHY state, and attaches the PHY
+ * to the mac driver.
+ * Return value:
+ * 0 on success
+ */
+static int stmmac_init_phy(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev;
+ char phy_id[BUS_ID_SIZE]; /* PHY to connect */
+ char bus_id[BUS_ID_SIZE];
+
+ priv->oldlink = 0;
+ priv->speed = 0;
+ priv->oldduplex = -1;
+
+ if (priv->phy_addr == -1) {
+ /* We don't have a PHY, so do nothing */
+ return 0;
+ }
+
+ snprintf(bus_id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+ snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, bus_id, priv->phy_addr);
+ pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id);
+
+ phydev = phy_connect(dev, phy_id, &stmmac_adjust_link, 0,
+ priv->phy_interface);
+
+ if (IS_ERR(phydev)) {
+ pr_err("%s: Could not attach to PHY\n", dev->name);
+ return PTR_ERR(phydev);
+ }
+
+ /*
+ * Broken HW is sometimes missing the pull-up resistor on the
+ * MDIO line, which results in reads to non-existent devices returning
+ * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
+ * device as well.
+ * Note: phydev->phy_id is the result of reading the UID PHY registers.
+ */
+ if (phydev->phy_id == 0) {
+ phy_disconnect(phydev);
+ return -ENODEV;
+ }
+ pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)"
+ " Link = %d\n", dev->name, phydev->phy_id, phydev->link);
+
+ priv->phydev = phydev;
+
+ return 0;
+}
+
+static inline void stmmac_mac_enable_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+ value |= MAC_RNABLE_RX;
+ /* Set the RE (receive enable bit into the MAC CTRL register). */
+ writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_enable_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+ value |= MAC_ENABLE_TX;
+ /* Set the TE (transmit enable bit into the MAC CTRL register). */
+ writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_disable_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+ value &= ~MAC_RNABLE_RX;
+ writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+static inline void stmmac_mac_disable_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + MAC_CTRL_REG);
+ value &= ~MAC_ENABLE_TX;
+ writel(value, ioaddr + MAC_CTRL_REG);
+}
+
+/**
+ * display_ring
+ * @p: pointer to the ring.
+ * @size: size of the ring.
+ * Description: display all the descriptors within the ring.
+ */
+static void display_ring(struct dma_desc *p, int size)
+{
+ struct tmp_s {
+ u64 a;
+ unsigned int b;
+ unsigned int c;
+ };
+ int i;
+ for (i = 0; i < size; i++) {
+ struct tmp_s *x = (struct tmp_s *)(p + i);
+ pr_info("\t%d [0x%x]: DES0=0x%x DES1=0x%x BUF1=0x%x BUF2=0x%x",
+ i, (unsigned int)virt_to_phys(&p[i]),
+ (unsigned int)(x->a), (unsigned int)((x->a) >> 32),
+ x->b, x->c);
+ pr_info("\n");
+ }
+}
+
+/**
+ * init_dma_desc_rings - init the RX/TX descriptor rings
+ * @dev: net device structure
+ * Description: this function initializes the DMA RX/TX descriptors
+ * and allocates the socket buffers.
+ */
+static void init_dma_desc_rings(struct net_device *dev)
+{
+ int i;
+ struct stmmac_priv *priv = netdev_priv(dev);
+ struct sk_buff *skb;
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int rxsize = priv->dma_rx_size;
+ unsigned int bfsize = priv->dma_buf_sz;
+ int buff2_needed = 0;
+ int dis_ic = 0;
+
+#ifdef CONFIG_STMMAC_TIMER
+ /* Using Timers disable interrupts on completion for the reception */
+ dis_ic = 1;
+#endif
+ /* Set the Buffer size according to the MTU;
+ * indeed, in case of jumbo we need to bump-up the buffer sizes.
+ */
+ if (unlikely(dev->mtu >= BUF_SIZE_8KiB))
+ bfsize = BUF_SIZE_16KiB;
+ else if (unlikely(dev->mtu >= BUF_SIZE_4KiB))
+ bfsize = BUF_SIZE_8KiB;
+ else if (unlikely(dev->mtu >= BUF_SIZE_2KiB))
+ bfsize = BUF_SIZE_4KiB;
+ else if (unlikely(dev->mtu >= DMA_BUFFER_SIZE))
+ bfsize = BUF_SIZE_2KiB;
+ else
+ bfsize = DMA_BUFFER_SIZE;
+
+ /* If the MTU exceeds 8k so use the second buffer in the chain */
+ if (bfsize >= BUF_SIZE_8KiB)
+ buff2_needed = 1;
+
+ DBG(probe, INFO, "stmmac: txsize %d, rxsize %d, bfsize %d\n",
+ txsize, rxsize, bfsize);
+
+ priv->rx_skbuff_dma = kmalloc(rxsize * sizeof(dma_addr_t), GFP_KERNEL);
+ priv->rx_skbuff =
+ kmalloc(sizeof(struct sk_buff *) * rxsize, GFP_KERNEL);
+ priv->dma_rx =
+ (struct dma_desc *)dma_alloc_coherent(priv->device,
+ rxsize *
+ sizeof(struct dma_desc),
+ &priv->dma_rx_phy,
+ GFP_KERNEL);
+ priv->tx_skbuff = kmalloc(sizeof(struct sk_buff *) * txsize,
+ GFP_KERNEL);
+ priv->dma_tx =
+ (struct dma_desc *)dma_alloc_coherent(priv->device,
+ txsize *
+ sizeof(struct dma_desc),
+ &priv->dma_tx_phy,
+ GFP_KERNEL);
+
+ if ((priv->dma_rx == NULL) || (priv->dma_tx == NULL)) {
+ pr_err("%s:ERROR allocating the DMA Tx/Rx desc\n", __func__);
+ return;
+ }
+
+ DBG(probe, INFO, "stmmac (%s) DMA desc rings: virt addr (Rx %p, "
+ "Tx %p)\n\tDMA phy addr (Rx 0x%08x, Tx 0x%08x)\n",
+ dev->name, priv->dma_rx, priv->dma_tx,
+ (unsigned int)priv->dma_rx_phy, (unsigned int)priv->dma_tx_phy);
+
+ /* RX INITIALIZATION */
+ DBG(probe, INFO, "stmmac: SKB addresses:\n"
+ "skb\t\tskb data\tdma data\n");
+
+ for (i = 0; i < rxsize; i++) {
+ struct dma_desc *p = priv->dma_rx + i;
+
+ skb = netdev_alloc_skb_ip_align(dev, bfsize);
+ if (unlikely(skb == NULL)) {
+ pr_err("%s: Rx init fails; skb is NULL\n", __func__);
+ break;
+ }
+ priv->rx_skbuff[i] = skb;
+ priv->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data,
+ bfsize, DMA_FROM_DEVICE);
+
+ p->des2 = priv->rx_skbuff_dma[i];
+ if (unlikely(buff2_needed))
+ p->des3 = p->des2 + BUF_SIZE_8KiB;
+ DBG(probe, INFO, "[%p]\t[%p]\t[%x]\n", priv->rx_skbuff[i],
+ priv->rx_skbuff[i]->data, priv->rx_skbuff_dma[i]);
+ }
+ priv->cur_rx = 0;
+ priv->dirty_rx = (unsigned int)(i - rxsize);
+ priv->dma_buf_sz = bfsize;
+ buf_sz = bfsize;
+
+ /* TX INITIALIZATION */
+ for (i = 0; i < txsize; i++) {
+ priv->tx_skbuff[i] = NULL;
+ priv->dma_tx[i].des2 = 0;
+ }
+ priv->dirty_tx = 0;
+ priv->cur_tx = 0;
+
+ /* Clear the Rx/Tx descriptors */
+ priv->mac_type->ops->init_rx_desc(priv->dma_rx, rxsize, dis_ic);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx, txsize);
+
+ if (netif_msg_hw(priv)) {
+ pr_info("RX descriptor ring:\n");
+ display_ring(priv->dma_rx, rxsize);
+ pr_info("TX descriptor ring:\n");
+ display_ring(priv->dma_tx, txsize);
+ }
+ return;
+}
+
+static void dma_free_rx_skbufs(struct stmmac_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->dma_rx_size; i++) {
+ if (priv->rx_skbuff[i]) {
+ dma_unmap_single(priv->device, priv->rx_skbuff_dma[i],
+ priv->dma_buf_sz, DMA_FROM_DEVICE);
+ dev_kfree_skb_any(priv->rx_skbuff[i]);
+ }
+ priv->rx_skbuff[i] = NULL;
+ }
+ return;
+}
+
+static void dma_free_tx_skbufs(struct stmmac_priv *priv)
+{
+ int i;
+
+ for (i = 0; i < priv->dma_tx_size; i++) {
+ if (priv->tx_skbuff[i] != NULL) {
+ struct dma_desc *p = priv->dma_tx + i;
+ if (p->des2)
+ dma_unmap_single(priv->device, p->des2,
+ priv->mac_type->ops->get_tx_len(p),
+ DMA_TO_DEVICE);
+ dev_kfree_skb_any(priv->tx_skbuff[i]);
+ priv->tx_skbuff[i] = NULL;
+ }
+ }
+ return;
+}
+
+static void free_dma_desc_resources(struct stmmac_priv *priv)
+{
+ /* Release the DMA TX/RX socket buffers */
+ dma_free_rx_skbufs(priv);
+ dma_free_tx_skbufs(priv);
+
+ /* Free the region of consistent memory previously allocated for
+ * the DMA */
+ dma_free_coherent(priv->device,
+ priv->dma_tx_size * sizeof(struct dma_desc),
+ priv->dma_tx, priv->dma_tx_phy);
+ dma_free_coherent(priv->device,
+ priv->dma_rx_size * sizeof(struct dma_desc),
+ priv->dma_rx, priv->dma_rx_phy);
+ kfree(priv->rx_skbuff_dma);
+ kfree(priv->rx_skbuff);
+ kfree(priv->tx_skbuff);
+
+ return;
+}
+
+/**
+ * stmmac_dma_start_tx
+ * @ioaddr: device I/O address
+ * Description: this function starts the DMA tx process.
+ */
+static void stmmac_dma_start_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value |= DMA_CONTROL_ST;
+ writel(value, ioaddr + DMA_CONTROL);
+ return;
+}
+
+static void stmmac_dma_stop_tx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value &= ~DMA_CONTROL_ST;
+ writel(value, ioaddr + DMA_CONTROL);
+ return;
+}
+
+/**
+ * stmmac_dma_start_rx
+ * @ioaddr: device I/O address
+ * Description: this function starts the DMA rx process.
+ */
+static void stmmac_dma_start_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value |= DMA_CONTROL_SR;
+ writel(value, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+static void stmmac_dma_stop_rx(unsigned long ioaddr)
+{
+ u32 value = readl(ioaddr + DMA_CONTROL);
+ value &= ~DMA_CONTROL_SR;
+ writel(value, ioaddr + DMA_CONTROL);
+
+ return;
+}
+
+/**
+ * stmmac_dma_operation_mode - HW DMA operation mode
+ * @priv : pointer to the private device structure.
+ * Description: it sets the DMA operation mode: tx/rx DMA thresholds
+ * or Store-And-Forward capability. It also verifies the COE for the
+ * transmission in case of Giga ETH.
+ */
+static void stmmac_dma_operation_mode(struct stmmac_priv *priv)
+{
+ if (!priv->is_gmac) {
+ /* MAC 10/100 */
+ priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc, 0);
+ priv->tx_coe = NO_HW_CSUM;
+ } else {
+ if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) {
+ priv->mac_type->ops->dma_mode(priv->dev->base_addr,
+ SF_DMA_MODE, SF_DMA_MODE);
+ tc = SF_DMA_MODE;
+ priv->tx_coe = HW_CSUM;
+ } else {
+ /* Checksum computation is performed in software. */
+ priv->mac_type->ops->dma_mode(priv->dev->base_addr, tc,
+ SF_DMA_MODE);
+ priv->tx_coe = NO_HW_CSUM;
+ }
+ }
+ tx_coe = priv->tx_coe;
+
+ return;
+}
+
+#ifdef STMMAC_DEBUG
+/**
+ * show_tx_process_state
+ * @status: tx descriptor status field
+ * Description: it shows the Transmit Process State for CSR5[22:20]
+ */
+static void show_tx_process_state(unsigned int status)
+{
+ unsigned int state;
+ state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT;
+
+ switch (state) {
+ case 0:
+ pr_info("- TX (Stopped): Reset or Stop command\n");
+ break;
+ case 1:
+ pr_info("- TX (Running):Fetching the Tx desc\n");
+ break;
+ case 2:
+ pr_info("- TX (Running): Waiting for end of tx\n");
+ break;
+ case 3:
+ pr_info("- TX (Running): Reading the data "
+ "and queuing the data into the Tx buf\n");
+ break;
+ case 6:
+ pr_info("- TX (Suspended): Tx Buff Underflow "
+ "or an unavailable Transmit descriptor\n");
+ break;
+ case 7:
+ pr_info("- TX (Running): Closing Tx descriptor\n");
+ break;
+ default:
+ break;
+ }
+ return;
+}
+
+/**
+ * show_rx_process_state
+ * @status: rx descriptor status field
+ * Description: it shows the Receive Process State for CSR5[19:17]
+ */
+static void show_rx_process_state(unsigned int status)
+{
+ unsigned int state;
+ state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT;
+
+ switch (state) {
+ case 0:
+ pr_info("- RX (Stopped): Reset or Stop command\n");
+ break;
+ case 1:
+ pr_info("- RX (Running): Fetching the Rx desc\n");
+ break;
+ case 2:
+ pr_info("- RX (Running):Checking for end of pkt\n");
+ break;
+ case 3:
+ pr_info("- RX (Running): Waiting for Rx pkt\n");
+ break;
+ case 4:
+ pr_info("- RX (Suspended): Unavailable Rx buf\n");
+ break;
+ case 5:
+ pr_info("- RX (Running): Closing Rx descriptor\n");
+ break;
+ case 6:
+ pr_info("- RX(Running): Flushing the current frame"
+ " from the Rx buf\n");
+ break;
+ case 7:
+ pr_info("- RX (Running): Queuing the Rx frame"
+ " from the Rx buf into memory\n");
+ break;
+ default:
+ break;
+ }
+ return;
+}
+#endif
+
+/**
+ * stmmac_tx:
+ * @priv: private driver structure
+ * Description: it reclaims resources after transmission completes.
+ */
+static void stmmac_tx(struct stmmac_priv *priv)
+{
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned long ioaddr = priv->dev->base_addr;
+
+ while (priv->dirty_tx != priv->cur_tx) {
+ int last;
+ unsigned int entry = priv->dirty_tx % txsize;
+ struct sk_buff *skb = priv->tx_skbuff[entry];
+ struct dma_desc *p = priv->dma_tx + entry;
+
+ /* Check if the descriptor is owned by the DMA. */
+ if (priv->mac_type->ops->get_tx_owner(p))
+ break;
+
+ /* Verify tx error by looking at the last segment */
+ last = priv->mac_type->ops->get_tx_ls(p);
+ if (likely(last)) {
+ int tx_error =
+ priv->mac_type->ops->tx_status(&priv->dev->stats,
+ &priv->xstats,
+ p, ioaddr);
+ if (likely(tx_error == 0)) {
+ priv->dev->stats.tx_packets++;
+ priv->xstats.tx_pkt_n++;
+ } else
+ priv->dev->stats.tx_errors++;
+ }
+ TX_DBG("%s: curr %d, dirty %d\n", __func__,
+ priv->cur_tx, priv->dirty_tx);
+
+ if (likely(p->des2))
+ dma_unmap_single(priv->device, p->des2,
+ priv->mac_type->ops->get_tx_len(p),
+ DMA_TO_DEVICE);
+ if (unlikely(p->des3))
+ p->des3 = 0;
+
+ if (likely(skb != NULL)) {
+ /*
+ * If there's room in the queue (limit it to size)
+ * we add this skb back into the pool,
+ * if it's the right size.
+ */
+ if ((skb_queue_len(&priv->rx_recycle) <
+ priv->dma_rx_size) &&
+ skb_recycle_check(skb, priv->dma_buf_sz))
+ __skb_queue_head(&priv->rx_recycle, skb);
+ else
+ dev_kfree_skb(skb);
+
+ priv->tx_skbuff[entry] = NULL;
+ }
+
+ priv->mac_type->ops->release_tx_desc(p);
+
+ entry = (++priv->dirty_tx) % txsize;
+ }
+ if (unlikely(netif_queue_stopped(priv->dev) &&
+ stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv))) {
+ netif_tx_lock(priv->dev);
+ if (netif_queue_stopped(priv->dev) &&
+ stmmac_tx_avail(priv) > STMMAC_TX_THRESH(priv)) {
+ TX_DBG("%s: restart transmit\n", __func__);
+ netif_wake_queue(priv->dev);
+ }
+ netif_tx_unlock(priv->dev);
+ }
+ return;
+}
+
+static inline void stmmac_enable_irq(struct stmmac_priv *priv)
+{
+#ifndef CONFIG_STMMAC_TIMER
+ writel(DMA_INTR_DEFAULT_MASK, priv->dev->base_addr + DMA_INTR_ENA);
+#else
+ priv->tm->timer_start(tmrate);
+#endif
+}
+
+static inline void stmmac_disable_irq(struct stmmac_priv *priv)
+{
+#ifndef CONFIG_STMMAC_TIMER
+ writel(0, priv->dev->base_addr + DMA_INTR_ENA);
+#else
+ priv->tm->timer_stop();
+#endif
+}
+
+static int stmmac_has_work(struct stmmac_priv *priv)
+{
+ unsigned int has_work = 0;
+ int rxret, tx_work = 0;
+
+ rxret = priv->mac_type->ops->get_rx_owner(priv->dma_rx +
+ (priv->cur_rx % priv->dma_rx_size));
+
+ if (priv->dirty_tx != priv->cur_tx)
+ tx_work = 1;
+
+ if (likely(!rxret || tx_work))
+ has_work = 1;
+
+ return has_work;
+}
+
+static inline void _stmmac_schedule(struct stmmac_priv *priv)
+{
+ if (likely(stmmac_has_work(priv))) {
+ stmmac_disable_irq(priv);
+ napi_schedule(&priv->napi);
+ }
+}
+
+#ifdef CONFIG_STMMAC_TIMER
+void stmmac_schedule(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ priv->xstats.sched_timer_n++;
+
+ _stmmac_schedule(priv);
+
+ return;
+}
+
+static void stmmac_no_timer_started(unsigned int x)
+{;
+};
+
+static void stmmac_no_timer_stopped(void)
+{;
+};
+#endif
+
+/**
+ * stmmac_tx_err:
+ * @priv: pointer to the private device structure
+ * Description: it cleans the descriptors and restarts the transmission
+ * in case of errors.
+ */
+static void stmmac_tx_err(struct stmmac_priv *priv)
+{
+ netif_stop_queue(priv->dev);
+
+ stmmac_dma_stop_tx(priv->dev->base_addr);
+ dma_free_tx_skbufs(priv);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
+ priv->dirty_tx = 0;
+ priv->cur_tx = 0;
+ stmmac_dma_start_tx(priv->dev->base_addr);
+
+ priv->dev->stats.tx_errors++;
+ netif_wake_queue(priv->dev);
+
+ return;
+}
+
+/**
+ * stmmac_dma_interrupt - Interrupt handler for the driver
+ * @dev: net device structure
+ * Description: Interrupt handler for the driver (DMA).
+ */
+static void stmmac_dma_interrupt(struct net_device *dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ struct stmmac_priv *priv = netdev_priv(dev);
+ /* read the status register (CSR5) */
+ u32 intr_status = readl(ioaddr + DMA_STATUS);
+
+ DBG(intr, INFO, "%s: [CSR5: 0x%08x]\n", __func__, intr_status);
+
+#ifdef STMMAC_DEBUG
+ /* It displays the DMA transmit process state (CSR5 register) */
+ if (netif_msg_tx_done(priv))
+ show_tx_process_state(intr_status);
+ if (netif_msg_rx_status(priv))
+ show_rx_process_state(intr_status);
+#endif
+ /* ABNORMAL interrupts */
+ if (unlikely(intr_status & DMA_STATUS_AIS)) {
+ DBG(intr, INFO, "CSR5[15] DMA ABNORMAL IRQ: ");
+ if (unlikely(intr_status & DMA_STATUS_UNF)) {
+ DBG(intr, INFO, "transmit underflow\n");
+ if (unlikely(tc != SF_DMA_MODE)
+ && (tc <= 256)) {
+ /* Try to bump up the threshold */
+ tc += 64;
+ priv->mac_type->ops->dma_mode(ioaddr, tc,
+ SF_DMA_MODE);
+ priv->xstats.threshold = tc;
+ }
+ stmmac_tx_err(priv);
+ priv->xstats.tx_undeflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TJT)) {
+ DBG(intr, INFO, "transmit jabber\n");
+ priv->xstats.tx_jabber_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_OVF)) {
+ DBG(intr, INFO, "recv overflow\n");
+ priv->xstats.rx_overflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RU)) {
+ DBG(intr, INFO, "receive buffer unavailable\n");
+ priv->xstats.rx_buf_unav_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RPS)) {
+ DBG(intr, INFO, "receive process stopped\n");
+ priv->xstats.rx_process_stopped_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_RWT)) {
+ DBG(intr, INFO, "receive watchdog\n");
+ priv->xstats.rx_watchdog_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_ETI)) {
+ DBG(intr, INFO, "transmit early interrupt\n");
+ priv->xstats.tx_early_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TPS)) {
+ DBG(intr, INFO, "transmit process stopped\n");
+ priv->xstats.tx_process_stopped_irq++;
+ stmmac_tx_err(priv);
+ }
+ if (unlikely(intr_status & DMA_STATUS_FBI)) {
+ DBG(intr, INFO, "fatal bus error\n");
+ priv->xstats.fatal_bus_error_irq++;
+ stmmac_tx_err(priv);
+ }
+ }
+
+ /* TX/RX NORMAL interrupts */
+ if (intr_status & DMA_STATUS_NIS) {
+ priv->xstats.normal_irq_n++;
+ if (likely((intr_status & DMA_STATUS_RI) ||
+ (intr_status & (DMA_STATUS_TI))))
+ _stmmac_schedule(priv);
+ }
+
+ /* Optional hardware blocks, interrupts should be disabled */
+ if (unlikely(intr_status &
+ (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+ pr_info("%s: unexpected status %08x\n", __func__, intr_status);
+
+ /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
+ writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
+
+ DBG(intr, INFO, "\n\n");
+
+ return;
+}
+
+/**
+ * stmmac_open - open entry point of the driver
+ * @dev : pointer to the device structure.
+ * Description:
+ * This function is the open entry point of the driver.
+ * Return value:
+ * 0 on success and an appropriate (-)ve integer as defined in errno.h
+ * file on failure.
+ */
+static int stmmac_open(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+ int ret;
+
+ /* Check that the MAC address is valid. If its not, refuse
+ * to bring the device up. The user must specify an
+ * address using the following linux command:
+ * ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ random_ether_addr(dev->dev_addr);
+ pr_warning("%s: generated random MAC address %pM\n", dev->name,
+ dev->dev_addr);
+ }
+
+ stmmac_verify_args();
+
+ ret = stmmac_init_phy(dev);
+ if (unlikely(ret)) {
+ pr_err("%s: Cannot attach to PHY (error: %d)\n", __func__, ret);
+ return ret;
+ }
+
+ /* Request the IRQ lines */
+ ret = request_irq(dev->irq, &stmmac_interrupt,
+ IRQF_SHARED, dev->name, dev);
+ if (unlikely(ret < 0)) {
+ pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
+ __func__, dev->irq, ret);
+ return ret;
+ }
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm = kmalloc(sizeof(struct stmmac_timer *), GFP_KERNEL);
+ if (unlikely(priv->tm == NULL)) {
+ pr_err("%s: ERROR: timer memory alloc failed \n", __func__);
+ return -ENOMEM;
+ }
+ priv->tm->freq = tmrate;
+
+ /* Test if the HW timer can be actually used.
+ * In case of failure continue with no timer. */
+ if (unlikely((stmmac_open_ext_timer(dev, priv->tm)) < 0)) {
+ pr_warning("stmmaceth: cannot attach the HW timer\n");
+ tmrate = 0;
+ priv->tm->freq = 0;
+ priv->tm->timer_start = stmmac_no_timer_started;
+ priv->tm->timer_stop = stmmac_no_timer_stopped;
+ }
+#endif
+
+ /* Create and initialize the TX/RX descriptors chains. */
+ priv->dma_tx_size = STMMAC_ALIGN(dma_txsize);
+ priv->dma_rx_size = STMMAC_ALIGN(dma_rxsize);
+ priv->dma_buf_sz = STMMAC_ALIGN(buf_sz);
+ init_dma_desc_rings(dev);
+
+ /* DMA initialization and SW reset */
+ if (unlikely(priv->mac_type->ops->dma_init(ioaddr,
+ priv->pbl, priv->dma_tx_phy, priv->dma_rx_phy) < 0)) {
+
+ pr_err("%s: DMA initialization failed\n", __func__);
+ return -1;
+ }
+
+ /* Copy the MAC addr into the HW */
+ priv->mac_type->ops->set_umac_addr(ioaddr, dev->dev_addr, 0);
+ /* Initialize the MAC Core */
+ priv->mac_type->ops->core_init(ioaddr);
+
+ priv->shutdown = 0;
+
+ /* Initialise the MMC (if present) to disable all interrupts. */
+ writel(0xffffffff, ioaddr + MMC_HIGH_INTR_MASK);
+ writel(0xffffffff, ioaddr + MMC_LOW_INTR_MASK);
+
+ /* Enable the MAC Rx/Tx */
+ stmmac_mac_enable_rx(ioaddr);
+ stmmac_mac_enable_tx(ioaddr);
+
+ /* Set the HW DMA mode and the COE */
+ stmmac_dma_operation_mode(priv);
+
+ /* Extra statistics */
+ memset(&priv->xstats, 0, sizeof(struct stmmac_extra_stats));
+ priv->xstats.threshold = tc;
+
+ /* Start the ball rolling... */
+ DBG(probe, DEBUG, "%s: DMA RX/TX processes started...\n", dev->name);
+ stmmac_dma_start_tx(ioaddr);
+ stmmac_dma_start_rx(ioaddr);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_start(tmrate);
+#endif
+ /* Dump DMA/MAC registers */
+ if (netif_msg_hw(priv)) {
+ priv->mac_type->ops->dump_mac_regs(ioaddr);
+ priv->mac_type->ops->dump_dma_regs(ioaddr);
+ }
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
+ napi_enable(&priv->napi);
+ skb_queue_head_init(&priv->rx_recycle);
+ netif_start_queue(dev);
+ return 0;
+}
+
+/**
+ * stmmac_release - close entry point of the driver
+ * @dev : device pointer.
+ * Description:
+ * This is the stop entry point of the driver.
+ */
+static int stmmac_release(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Stop and disconnect the PHY */
+ if (priv->phydev) {
+ phy_stop(priv->phydev);
+ phy_disconnect(priv->phydev);
+ priv->phydev = NULL;
+ }
+
+ netif_stop_queue(dev);
+
+#ifdef CONFIG_STMMAC_TIMER
+ /* Stop and release the timer */
+ stmmac_close_ext_timer();
+ if (priv->tm != NULL)
+ kfree(priv->tm);
+#endif
+ napi_disable(&priv->napi);
+ skb_queue_purge(&priv->rx_recycle);
+
+ /* Free the IRQ lines */
+ free_irq(dev->irq, dev);
+
+ /* Stop TX/RX DMA and clear the descriptors */
+ stmmac_dma_stop_tx(dev->base_addr);
+ stmmac_dma_stop_rx(dev->base_addr);
+
+ /* Release and free the Rx/Tx resources */
+ free_dma_desc_resources(priv);
+
+ /* Disable the MAC core */
+ stmmac_mac_disable_tx(dev->base_addr);
+ stmmac_mac_disable_rx(dev->base_addr);
+
+ netif_carrier_off(dev);
+
+ return 0;
+}
+
+/*
+ * To perform emulated hardware segmentation on skb.
+ */
+static int stmmac_sw_tso(struct stmmac_priv *priv, struct sk_buff *skb)
+{
+ struct sk_buff *segs, *curr_skb;
+ int gso_segs = skb_shinfo(skb)->gso_segs;
+
+ /* Estimate the number of fragments in the worst case */
+ if (unlikely(stmmac_tx_avail(priv) < gso_segs)) {
+ netif_stop_queue(priv->dev);
+ TX_DBG(KERN_ERR "%s: TSO BUG! Tx Ring full when queue awake\n",
+ __func__);
+ if (stmmac_tx_avail(priv) < gso_segs)
+ return NETDEV_TX_BUSY;
+
+ netif_wake_queue(priv->dev);
+ }
+ TX_DBG("\tstmmac_sw_tso: segmenting: skb %p (len %d)\n",
+ skb, skb->len);
+
+ segs = skb_gso_segment(skb, priv->dev->features & ~NETIF_F_TSO);
+ if (unlikely(IS_ERR(segs)))
+ goto sw_tso_end;
+
+ do {
+ curr_skb = segs;
+ segs = segs->next;
+ TX_DBG("\t\tcurrent skb->len: %d, *curr %p,"
+ "*next %p\n", curr_skb->len, curr_skb, segs);
+ curr_skb->next = NULL;
+ stmmac_xmit(curr_skb, priv->dev);
+ } while (segs);
+
+sw_tso_end:
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+}
+
+static unsigned int stmmac_handle_jumbo_frames(struct sk_buff *skb,
+ struct net_device *dev,
+ int csum_insertion)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int nopaged_len = skb_headlen(skb);
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int entry = priv->cur_tx % txsize;
+ struct dma_desc *desc = priv->dma_tx + entry;
+
+ if (nopaged_len > BUF_SIZE_8KiB) {
+
+ int buf2_size = nopaged_len - BUF_SIZE_8KiB;
+
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ BUF_SIZE_8KiB, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, BUF_SIZE_8KiB,
+ csum_insertion);
+
+ entry = (++priv->cur_tx) % txsize;
+ desc = priv->dma_tx + entry;
+
+ desc->des2 = dma_map_single(priv->device,
+ skb->data + BUF_SIZE_8KiB,
+ buf2_size, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 0,
+ buf2_size, csum_insertion);
+ priv->mac_type->ops->set_tx_owner(desc);
+ priv->tx_skbuff[entry] = NULL;
+ } else {
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ nopaged_len, DMA_TO_DEVICE);
+ desc->des3 = desc->des2 + BUF_SIZE_4KiB;
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
+ csum_insertion);
+ }
+ return entry;
+}
+
+/**
+ * stmmac_xmit:
+ * @skb : the socket buffer
+ * @dev : device pointer
+ * Description : Tx entry point of the driver.
+ */
+static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned int txsize = priv->dma_tx_size;
+ unsigned int entry;
+ int i, csum_insertion = 0;
+ int nfrags = skb_shinfo(skb)->nr_frags;
+ struct dma_desc *desc, *first;
+
+ if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
+ if (!netif_queue_stopped(dev)) {
+ netif_stop_queue(dev);
+ /* This is a hard error, log it. */
+ pr_err("%s: BUG! Tx Ring full when queue awake\n",
+ __func__);
+ }
+ return NETDEV_TX_BUSY;
+ }
+
+ entry = priv->cur_tx % txsize;
+
+#ifdef STMMAC_XMIT_DEBUG
+ if ((skb->len > ETH_FRAME_LEN) || nfrags)
+ pr_info("stmmac xmit:\n"
+ "\tskb addr %p - len: %d - nopaged_len: %d\n"
+ "\tn_frags: %d - ip_summed: %d - %s gso\n",
+ skb, skb->len, skb_headlen(skb), nfrags, skb->ip_summed,
+ !skb_is_gso(skb) ? "isn't" : "is");
+#endif
+
+ if (unlikely(skb_is_gso(skb)))
+ return stmmac_sw_tso(priv, skb);
+
+ if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) {
+ if (likely(priv->tx_coe == NO_HW_CSUM))
+ skb_checksum_help(skb);
+ else
+ csum_insertion = 1;
+ }
+
+ desc = priv->dma_tx + entry;
+ first = desc;
+
+#ifdef STMMAC_XMIT_DEBUG
+ if ((nfrags > 0) || (skb->len > ETH_FRAME_LEN))
+ pr_debug("stmmac xmit: skb len: %d, nopaged_len: %d,\n"
+ "\t\tn_frags: %d, ip_summed: %d\n",
+ skb->len, skb_headlen(skb), nfrags, skb->ip_summed);
+#endif
+ priv->tx_skbuff[entry] = skb;
+ if (unlikely(skb->len >= BUF_SIZE_4KiB)) {
+ entry = stmmac_handle_jumbo_frames(skb, dev, csum_insertion);
+ desc = priv->dma_tx + entry;
+ } else {
+ unsigned int nopaged_len = skb_headlen(skb);
+ desc->des2 = dma_map_single(priv->device, skb->data,
+ nopaged_len, DMA_TO_DEVICE);
+ priv->mac_type->ops->prepare_tx_desc(desc, 1, nopaged_len,
+ csum_insertion);
+ }
+
+ for (i = 0; i < nfrags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ int len = frag->size;
+
+ entry = (++priv->cur_tx) % txsize;
+ desc = priv->dma_tx + entry;
+
+ TX_DBG("\t[entry %d] segment len: %d\n", entry, len);
+ desc->des2 = dma_map_page(priv->device, frag->page,
+ frag->page_offset,
+ len, DMA_TO_DEVICE);
+ priv->tx_skbuff[entry] = NULL;
+ priv->mac_type->ops->prepare_tx_desc(desc, 0, len,
+ csum_insertion);
+ priv->mac_type->ops->set_tx_owner(desc);
+ }
+
+ /* Interrupt on completition only for the latest segment */
+ priv->mac_type->ops->close_tx_desc(desc);
+#ifdef CONFIG_STMMAC_TIMER
+ /* Clean IC while using timers */
+ priv->mac_type->ops->clear_tx_ic(desc);
+#endif
+ /* To avoid raise condition */
+ priv->mac_type->ops->set_tx_owner(first);
+
+ priv->cur_tx++;
+
+#ifdef STMMAC_XMIT_DEBUG
+ if (netif_msg_pktdata(priv)) {
+ pr_info("stmmac xmit: current=%d, dirty=%d, entry=%d, "
+ "first=%p, nfrags=%d\n",
+ (priv->cur_tx % txsize), (priv->dirty_tx % txsize),
+ entry, first, nfrags);
+ display_ring(priv->dma_tx, txsize);
+ pr_info(">>> frame to be transmitted: ");
+ print_pkt(skb->data, skb->len);
+ }
+#endif
+ if (unlikely(stmmac_tx_avail(priv) <= (MAX_SKB_FRAGS + 1))) {
+ TX_DBG("%s: stop transmitted packets\n", __func__);
+ netif_stop_queue(dev);
+ }
+
+ dev->stats.tx_bytes += skb->len;
+
+ /* CSR1 enables the transmit DMA to check for new descriptor */
+ writel(1, dev->base_addr + DMA_XMT_POLL_DEMAND);
+
+ return NETDEV_TX_OK;
+}
+
+static inline void stmmac_rx_refill(struct stmmac_priv *priv)
+{
+ unsigned int rxsize = priv->dma_rx_size;
+ int bfsize = priv->dma_buf_sz;
+ struct dma_desc *p = priv->dma_rx;
+
+ for (; priv->cur_rx - priv->dirty_rx > 0; priv->dirty_rx++) {
+ unsigned int entry = priv->dirty_rx % rxsize;
+ if (likely(priv->rx_skbuff[entry] == NULL)) {
+ struct sk_buff *skb;
+
+ skb = __skb_dequeue(&priv->rx_recycle);
+ if (skb == NULL)
+ skb = netdev_alloc_skb_ip_align(priv->dev,
+ bfsize);
+
+ if (unlikely(skb == NULL))
+ break;
+
+ priv->rx_skbuff[entry] = skb;
+ priv->rx_skbuff_dma[entry] =
+ dma_map_single(priv->device, skb->data, bfsize,
+ DMA_FROM_DEVICE);
+
+ (p + entry)->des2 = priv->rx_skbuff_dma[entry];
+ if (unlikely(priv->is_gmac)) {
+ if (bfsize >= BUF_SIZE_8KiB)
+ (p + entry)->des3 =
+ (p + entry)->des2 + BUF_SIZE_8KiB;
+ }
+ RX_DBG(KERN_INFO "\trefill entry #%d\n", entry);
+ }
+ priv->mac_type->ops->set_rx_owner(p + entry);
+ }
+ return;
+}
+
+static int stmmac_rx(struct stmmac_priv *priv, int limit)
+{
+ unsigned int rxsize = priv->dma_rx_size;
+ unsigned int entry = priv->cur_rx % rxsize;
+ unsigned int next_entry;
+ unsigned int count = 0;
+ struct dma_desc *p = priv->dma_rx + entry;
+ struct dma_desc *p_next;
+
+#ifdef STMMAC_RX_DEBUG
+ if (netif_msg_hw(priv)) {
+ pr_debug(">>> stmmac_rx: descriptor ring:\n");
+ display_ring(priv->dma_rx, rxsize);
+ }
+#endif
+ count = 0;
+ while (!priv->mac_type->ops->get_rx_owner(p)) {
+ int status;
+
+ if (count >= limit)
+ break;
+
+ count++;
+
+ next_entry = (++priv->cur_rx) % rxsize;
+ p_next = priv->dma_rx + next_entry;
+ prefetch(p_next);
+
+ /* read the status of the incoming frame */
+ status = (priv->mac_type->ops->rx_status(&priv->dev->stats,
+ &priv->xstats, p));
+ if (unlikely(status == discard_frame))
+ priv->dev->stats.rx_errors++;
+ else {
+ struct sk_buff *skb;
+ /* Length should omit the CRC */
+ int frame_len =
+ priv->mac_type->ops->get_rx_frame_len(p) - 4;
+
+#ifdef STMMAC_RX_DEBUG
+ if (frame_len > ETH_FRAME_LEN)
+ pr_debug("\tRX frame size %d, COE status: %d\n",
+ frame_len, status);
+
+ if (netif_msg_hw(priv))
+ pr_debug("\tdesc: %p [entry %d] buff=0x%x\n",
+ p, entry, p->des2);
+#endif
+ skb = priv->rx_skbuff[entry];
+ if (unlikely(!skb)) {
+ pr_err("%s: Inconsistent Rx descriptor chain\n",
+ priv->dev->name);
+ priv->dev->stats.rx_dropped++;
+ break;
+ }
+ prefetch(skb->data - NET_IP_ALIGN);
+ priv->rx_skbuff[entry] = NULL;
+
+ skb_put(skb, frame_len);
+ dma_unmap_single(priv->device,
+ priv->rx_skbuff_dma[entry],
+ priv->dma_buf_sz, DMA_FROM_DEVICE);
+#ifdef STMMAC_RX_DEBUG
+ if (netif_msg_pktdata(priv)) {
+ pr_info(" frame received (%dbytes)", frame_len);
+ print_pkt(skb->data, frame_len);
+ }
+#endif
+ skb->protocol = eth_type_trans(skb, priv->dev);
+
+ if (unlikely(status == csum_none)) {
+ /* always for the old mac 10/100 */
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_receive_skb(skb);
+ } else {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ napi_gro_receive(&priv->napi, skb);
+ }
+
+ priv->dev->stats.rx_packets++;
+ priv->dev->stats.rx_bytes += frame_len;
+ priv->dev->last_rx = jiffies;
+ }
+ entry = next_entry;
+ p = p_next; /* use prefetched values */
+ }
+
+ stmmac_rx_refill(priv);
+
+ priv->xstats.rx_pkt_n += count;
+
+ return count;
+}
+
+/**
+ * stmmac_poll - stmmac poll method (NAPI)
+ * @napi : pointer to the napi structure.
+ * @budget : maximum number of packets that the current CPU can receive from
+ * all interfaces.
+ * Description :
+ * This function implements the the reception process.
+ * Also it runs the TX completion thread
+ */
+static int stmmac_poll(struct napi_struct *napi, int budget)
+{
+ struct stmmac_priv *priv = container_of(napi, struct stmmac_priv, napi);
+ int work_done = 0;
+
+ priv->xstats.poll_n++;
+ stmmac_tx(priv);
+ work_done = stmmac_rx(priv, budget);
+
+ if (work_done < budget) {
+ napi_complete(napi);
+ stmmac_enable_irq(priv);
+ }
+ return work_done;
+}
+
+/**
+ * stmmac_tx_timeout
+ * @dev : Pointer to net device structure
+ * Description: this function is called when a packet transmission fails to
+ * complete within a reasonable tmrate. The driver will mark the error in the
+ * netdev structure and arrange for the device to be reset to a sane state
+ * in order to transmit a new packet.
+ */
+static void stmmac_tx_timeout(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ /* Clear Tx resources and restart transmitting again */
+ stmmac_tx_err(priv);
+ return;
+}
+
+/* Configuration changes (passed on by ifconfig) */
+static int stmmac_config(struct net_device *dev, struct ifmap *map)
+{
+ if (dev->flags & IFF_UP) /* can't act on a running interface */
+ return -EBUSY;
+
+ /* Don't allow changing the I/O address */
+ if (map->base_addr != dev->base_addr) {
+ pr_warning("%s: can't change I/O address\n", dev->name);
+ return -EOPNOTSUPP;
+ }
+
+ /* Don't allow changing the IRQ */
+ if (map->irq != dev->irq) {
+ pr_warning("%s: can't change IRQ number %d\n",
+ dev->name, dev->irq);
+ return -EOPNOTSUPP;
+ }
+
+ /* ignore other fields */
+ return 0;
+}
+
+/**
+ * stmmac_multicast_list - entry point for multicast addressing
+ * @dev : pointer to the device structure
+ * Description:
+ * This function is a driver entry point which gets called by the kernel
+ * whenever multicast addresses must be enabled/disabled.
+ * Return value:
+ * void.
+ */
+static void stmmac_multicast_list(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ spin_lock(&priv->lock);
+ priv->mac_type->ops->set_filter(dev);
+ spin_unlock(&priv->lock);
+ return;
+}
+
+/**
+ * stmmac_change_mtu - entry point to change MTU size for the device.
+ * @dev : device pointer.
+ * @new_mtu : the new MTU size for the device.
+ * Description: the Maximum Transfer Unit (MTU) is used by the network layer
+ * to drive packet transmission. Ethernet has an MTU of 1500 octets
+ * (ETH_DATA_LEN). This value can be changed with ifconfig.
+ * Return value:
+ * 0 on success and an appropriate (-)ve integer as defined in errno.h
+ * file on failure.
+ */
+static int stmmac_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int max_mtu;
+
+ if (netif_running(dev)) {
+ pr_err("%s: must be stopped to change its MTU\n", dev->name);
+ return -EBUSY;
+ }
+
+ if (priv->is_gmac)
+ max_mtu = JUMBO_LEN;
+ else
+ max_mtu = ETH_DATA_LEN;
+
+ if ((new_mtu < 46) || (new_mtu > max_mtu)) {
+ pr_err("%s: invalid MTU, max MTU is: %d\n", dev->name, max_mtu);
+ return -EINVAL;
+ }
+
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+static irqreturn_t stmmac_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ if (unlikely(!dev)) {
+ pr_err("%s: invalid dev pointer\n", __func__);
+ return IRQ_NONE;
+ }
+
+ if (priv->is_gmac) {
+ unsigned long ioaddr = dev->base_addr;
+ /* To handle GMAC own interrupts */
+ priv->mac_type->ops->host_irq_status(ioaddr);
+ }
+ stmmac_dma_interrupt(dev);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* Polling receive - used by NETCONSOLE and other diagnostic tools
+ * to allow network I/O with interrupts disabled. */
+static void stmmac_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ stmmac_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+/**
+ * stmmac_ioctl - Entry point for the Ioctl
+ * @dev: Device pointer.
+ * @rq: An IOCTL specefic structure, that can contain a pointer to
+ * a proprietary structure used to pass information to the driver.
+ * @cmd: IOCTL command
+ * Description:
+ * Currently there are no special functionality supported in IOCTL, just the
+ * phy_mii_ioctl(...) can be invoked.
+ */
+static int stmmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ if (!priv->phydev)
+ return -EINVAL;
+
+ spin_lock(&priv->lock);
+ ret = phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
+ spin_unlock(&priv->lock);
+ default:
+ break;
+ }
+ return ret;
+}
+
+#ifdef STMMAC_VLAN_TAG_USED
+static void stmmac_vlan_rx_register(struct net_device *dev,
+ struct vlan_group *grp)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ DBG(probe, INFO, "%s: Setting vlgrp to %p\n", dev->name, grp);
+
+ spin_lock(&priv->lock);
+ priv->vlgrp = grp;
+ spin_unlock(&priv->lock);
+
+ return;
+}
+#endif
+
+static const struct net_device_ops stmmac_netdev_ops = {
+ .ndo_open = stmmac_open,
+ .ndo_start_xmit = stmmac_xmit,
+ .ndo_stop = stmmac_release,
+ .ndo_change_mtu = stmmac_change_mtu,
+ .ndo_set_multicast_list = stmmac_multicast_list,
+ .ndo_tx_timeout = stmmac_tx_timeout,
+ .ndo_do_ioctl = stmmac_ioctl,
+ .ndo_set_config = stmmac_config,
+#ifdef STMMAC_VLAN_TAG_USED
+ .ndo_vlan_rx_register = stmmac_vlan_rx_register,
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = stmmac_poll_controller,
+#endif
+ .ndo_set_mac_address = eth_mac_addr,
+};
+
+/**
+ * stmmac_probe - Initialization of the adapter .
+ * @dev : device pointer
+ * Description: The function initializes the network device structure for
+ * the STMMAC driver. It also calls the low level routines
+ * in order to init the HW (i.e. the DMA engine)
+ */
+static int stmmac_probe(struct net_device *dev)
+{
+ int ret = 0;
+ struct stmmac_priv *priv = netdev_priv(dev);
+
+ ether_setup(dev);
+
+ dev->netdev_ops = &stmmac_netdev_ops;
+ stmmac_set_ethtool_ops(dev);
+
+ dev->features |= (NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA);
+ dev->watchdog_timeo = msecs_to_jiffies(watchdog);
+#ifdef STMMAC_VLAN_TAG_USED
+ /* Both mac100 and gmac support receive VLAN tag detection */
+ dev->features |= NETIF_F_HW_VLAN_RX;
+#endif
+ priv->msg_enable = netif_msg_init(debug, default_msg_level);
+
+ if (priv->is_gmac)
+ priv->rx_csum = 1;
+
+ if (flow_ctrl)
+ priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */
+
+ priv->pause = pause;
+ netif_napi_add(dev, &priv->napi, stmmac_poll, 64);
+
+ /* Get the MAC address */
+ priv->mac_type->ops->get_umac_addr(dev->base_addr, dev->dev_addr, 0);
+
+ if (!is_valid_ether_addr(dev->dev_addr))
+ pr_warning("\tno valid MAC address;"
+ "please, use ifconfig or nwhwconfig!\n");
+
+ ret = register_netdev(dev);
+ if (ret) {
+ pr_err("%s: ERROR %i registering the device\n",
+ __func__, ret);
+ return -ENODEV;
+ }
+
+ DBG(probe, DEBUG, "%s: Scatter/Gather: %s - HW checksums: %s\n",
+ dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
+ (dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
+
+ spin_lock_init(&priv->lock);
+
+ return ret;
+}
+
+/**
+ * stmmac_mac_device_setup
+ * @dev : device pointer
+ * Description: select and initialise the mac device (mac100 or Gmac).
+ */
+static int stmmac_mac_device_setup(struct net_device *dev)
+{
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ struct mac_device_info *device;
+
+ if (priv->is_gmac)
+ device = gmac_setup(ioaddr);
+ else
+ device = mac100_setup(ioaddr);
+
+ if (!device)
+ return -ENOMEM;
+
+ priv->mac_type = device;
+
+ priv->wolenabled = priv->mac_type->hw.pmt; /* PMT supported */
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->wolopts = WAKE_MAGIC; /* Magic Frame */
+
+ return 0;
+}
+
+static int stmmacphy_dvr_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacphy_data *plat_dat;
+ plat_dat = (struct plat_stmmacphy_data *)((pdev->dev).platform_data);
+
+ pr_debug("stmmacphy_dvr_probe: added phy for bus %d\n",
+ plat_dat->bus_id);
+
+ return 0;
+}
+
+static int stmmacphy_dvr_remove(struct platform_device *pdev)
+{
+ return 0;
+}
+
+static struct platform_driver stmmacphy_driver = {
+ .driver = {
+ .name = PHY_RESOURCE_NAME,
+ },
+ .probe = stmmacphy_dvr_probe,
+ .remove = stmmacphy_dvr_remove,
+};
+
+/**
+ * stmmac_associate_phy
+ * @dev: pointer to device structure
+ * @data: points to the private structure.
+ * Description: Scans through all the PHYs we have registered and checks if
+ * any are associated with our MAC. If so, then just fill in
+ * the blanks in our local context structure
+ */
+static int stmmac_associate_phy(struct device *dev, void *data)
+{
+ struct stmmac_priv *priv = (struct stmmac_priv *)data;
+ struct plat_stmmacphy_data *plat_dat;
+
+ plat_dat = (struct plat_stmmacphy_data *)(dev->platform_data);
+
+ DBG(probe, DEBUG, "%s: checking phy for bus %d\n", __func__,
+ plat_dat->bus_id);
+
+ /* Check that this phy is for the MAC being initialised */
+ if (priv->bus_id != plat_dat->bus_id)
+ return 0;
+
+ /* OK, this PHY is connected to the MAC.
+ Go ahead and get the parameters */
+ DBG(probe, DEBUG, "%s: OK. Found PHY config\n", __func__);
+ priv->phy_irq =
+ platform_get_irq_byname(to_platform_device(dev), "phyirq");
+ DBG(probe, DEBUG, "%s: PHY irq on bus %d is %d\n", __func__,
+ plat_dat->bus_id, priv->phy_irq);
+
+ /* Override with kernel parameters if supplied XXX CRS XXX
+ * this needs to have multiple instances */
+ if ((phyaddr >= 0) && (phyaddr <= 31))
+ plat_dat->phy_addr = phyaddr;
+
+ priv->phy_addr = plat_dat->phy_addr;
+ priv->phy_mask = plat_dat->phy_mask;
+ priv->phy_interface = plat_dat->interface;
+ priv->phy_reset = plat_dat->phy_reset;
+
+ DBG(probe, DEBUG, "%s: exiting\n", __func__);
+ return 1; /* forces exit of driver_for_each_device() */
+}
+
+/**
+ * stmmac_dvr_probe
+ * @pdev: platform device pointer
+ * Description: the driver is initialized through platform_device.
+ */
+static int stmmac_dvr_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct resource *res;
+ unsigned int *addr = NULL;
+ struct net_device *ndev = NULL;
+ struct stmmac_priv *priv;
+ struct plat_stmmacenet_data *plat_dat;
+
+ pr_info("STMMAC driver:\n\tplatform registration... ");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENODEV;
+ goto out;
+ }
+ pr_info("done!\n");
+
+ if (!request_mem_region(res->start, (res->end - res->start),
+ pdev->name)) {
+ pr_err("%s: ERROR: memory allocation failed"
+ "cannot get the I/O addr 0x%x\n",
+ __func__, (unsigned int)res->start);
+ ret = -EBUSY;
+ goto out;
+ }
+
+ addr = ioremap(res->start, (res->end - res->start));
+ if (!addr) {
+ pr_err("%s: ERROR: memory mapping failed \n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ndev = alloc_etherdev(sizeof(struct stmmac_priv));
+ if (!ndev) {
+ pr_err("%s: ERROR: allocating the device\n", __func__);
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+
+ /* Get the MAC information */
+ ndev->irq = platform_get_irq_byname(pdev, "macirq");
+ if (ndev->irq == -ENXIO) {
+ pr_err("%s: ERROR: MAC IRQ configuration "
+ "information not found\n", __func__);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ priv = netdev_priv(ndev);
+ priv->device = &(pdev->dev);
+ priv->dev = ndev;
+ plat_dat = (struct plat_stmmacenet_data *)((pdev->dev).platform_data);
+ priv->bus_id = plat_dat->bus_id;
+ priv->pbl = plat_dat->pbl; /* TLI */
+ priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */
+
+ platform_set_drvdata(pdev, ndev);
+
+ /* Set the I/O base addr */
+ ndev->base_addr = (unsigned long)addr;
+
+ /* MAC HW revice detection */
+ ret = stmmac_mac_device_setup(ndev);
+ if (ret < 0)
+ goto out;
+
+ /* Network Device Registration */
+ ret = stmmac_probe(ndev);
+ if (ret < 0)
+ goto out;
+
+ /* associate a PHY - it is provided by another platform bus */
+ if (!driver_for_each_device
+ (&(stmmacphy_driver.driver), NULL, (void *)priv,
+ stmmac_associate_phy)) {
+ pr_err("No PHY device is associated with this MAC!\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ priv->fix_mac_speed = plat_dat->fix_mac_speed;
+ priv->bsp_priv = plat_dat->bsp_priv;
+
+ pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
+ "\tIO base addr: 0x%08x)\n", ndev->name, pdev->name,
+ pdev->id, ndev->irq, (unsigned int)addr);
+
+ /* MDIO bus Registration */
+ pr_debug("\tMDIO bus (id: %d)...", priv->bus_id);
+ ret = stmmac_mdio_register(ndev);
+ if (ret < 0)
+ goto out;
+ pr_debug("registered!\n");
+
+out:
+ if (ret < 0) {
+ platform_set_drvdata(pdev, NULL);
+ release_mem_region(res->start, (res->end - res->start));
+ if (addr != NULL)
+ iounmap(addr);
+ }
+
+ return ret;
+}
+
+/**
+ * stmmac_dvr_remove
+ * @pdev: platform device pointer
+ * Description: this function resets the TX/RX processes, disables the MAC RX/TX
+ * changes the link status, releases the DMA descriptor rings,
+ * unregisters the MDIO bus and unmaps the allocated memory.
+ */
+static int stmmac_dvr_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ pr_info("%s:\n\tremoving driver", __func__);
+
+ stmmac_dma_stop_rx(ndev->base_addr);
+ stmmac_dma_stop_tx(ndev->base_addr);
+
+ stmmac_mac_disable_rx(ndev->base_addr);
+ stmmac_mac_disable_tx(ndev->base_addr);
+
+ netif_carrier_off(ndev);
+
+ stmmac_mdio_unregister(ndev);
+
+ platform_set_drvdata(pdev, NULL);
+ unregister_netdev(ndev);
+
+ iounmap((void *)ndev->base_addr);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, (res->end - res->start));
+
+ free_netdev(ndev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(dev);
+ int dis_ic = 0;
+
+ if (!dev || !netif_running(dev))
+ return 0;
+
+ spin_lock(&priv->lock);
+
+ if (state.event == PM_EVENT_SUSPEND) {
+ netif_device_detach(dev);
+ netif_stop_queue(dev);
+ if (priv->phydev)
+ phy_stop(priv->phydev);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_stop();
+ dis_ic = 1;
+#endif
+ napi_disable(&priv->napi);
+
+ /* Stop TX/RX DMA */
+ stmmac_dma_stop_tx(dev->base_addr);
+ stmmac_dma_stop_rx(dev->base_addr);
+ /* Clear the Rx/Tx descriptors */
+ priv->mac_type->ops->init_rx_desc(priv->dma_rx,
+ priv->dma_rx_size, dis_ic);
+ priv->mac_type->ops->init_tx_desc(priv->dma_tx,
+ priv->dma_tx_size);
+
+ stmmac_mac_disable_tx(dev->base_addr);
+
+ if (device_may_wakeup(&(pdev->dev))) {
+ /* Enable Power down mode by programming the PMT regs */
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->mac_type->ops->pmt(dev->base_addr,
+ priv->wolopts);
+ } else {
+ stmmac_mac_disable_rx(dev->base_addr);
+ }
+ } else {
+ priv->shutdown = 1;
+ /* Although this can appear slightly redundant it actually
+ * makes fast the standby operation and guarantees the driver
+ * working if hibernation is on media. */
+ stmmac_release(dev);
+ }
+
+ spin_unlock(&priv->lock);
+ return 0;
+}
+
+static int stmmac_resume(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct stmmac_priv *priv = netdev_priv(dev);
+ unsigned long ioaddr = dev->base_addr;
+
+ if (!netif_running(dev))
+ return 0;
+
+ spin_lock(&priv->lock);
+
+ if (priv->shutdown) {
+ /* Re-open the interface and re-init the MAC/DMA
+ and the rings. */
+ stmmac_open(dev);
+ goto out_resume;
+ }
+
+ /* Power Down bit, into the PM register, is cleared
+ * automatically as soon as a magic packet or a Wake-up frame
+ * is received. Anyway, it's better to manually clear
+ * this bit because it can generate problems while resuming
+ * from another devices (e.g. serial console). */
+ if (device_may_wakeup(&(pdev->dev)))
+ if (priv->wolenabled == PMT_SUPPORTED)
+ priv->mac_type->ops->pmt(dev->base_addr, 0);
+
+ netif_device_attach(dev);
+
+ /* Enable the MAC and DMA */
+ stmmac_mac_enable_rx(ioaddr);
+ stmmac_mac_enable_tx(ioaddr);
+ stmmac_dma_start_tx(ioaddr);
+ stmmac_dma_start_rx(ioaddr);
+
+#ifdef CONFIG_STMMAC_TIMER
+ priv->tm->timer_start(tmrate);
+#endif
+ napi_enable(&priv->napi);
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
+ netif_start_queue(dev);
+
+out_resume:
+ spin_unlock(&priv->lock);
+ return 0;
+}
+#endif
+
+static struct platform_driver stmmac_driver = {
+ .driver = {
+ .name = STMMAC_RESOURCE_NAME,
+ },
+ .probe = stmmac_dvr_probe,
+ .remove = stmmac_dvr_remove,
+#ifdef CONFIG_PM
+ .suspend = stmmac_suspend,
+ .resume = stmmac_resume,
+#endif
+
+};
+
+/**
+ * stmmac_init_module - Entry point for the driver
+ * Description: This function is the entry point for the driver.
+ */
+static int __init stmmac_init_module(void)
+{
+ int ret;
+
+ if (platform_driver_register(&stmmacphy_driver)) {
+ pr_err("No PHY devices registered!\n");
+ return -ENODEV;
+ }
+
+ ret = platform_driver_register(&stmmac_driver);
+ return ret;
+}
+
+/**
+ * stmmac_cleanup_module - Cleanup routine for the driver
+ * Description: This function is the cleanup routine for the driver.
+ */
+static void __exit stmmac_cleanup_module(void)
+{
+ platform_driver_unregister(&stmmacphy_driver);
+ platform_driver_unregister(&stmmac_driver);
+}
+
+#ifndef MODULE
+static int __init stmmac_cmdline_opt(char *str)
+{
+ char *opt;
+
+ if (!str || !*str)
+ return -EINVAL;
+ while ((opt = strsep(&str, ",")) != NULL) {
+ if (!strncmp(opt, "debug:", 6))
+ strict_strtoul(opt + 6, 0, (unsigned long *)&debug);
+ else if (!strncmp(opt, "phyaddr:", 8))
+ strict_strtoul(opt + 8, 0, (unsigned long *)&phyaddr);
+ else if (!strncmp(opt, "dma_txsize:", 11))
+ strict_strtoul(opt + 11, 0,
+ (unsigned long *)&dma_txsize);
+ else if (!strncmp(opt, "dma_rxsize:", 11))
+ strict_strtoul(opt + 11, 0,
+ (unsigned long *)&dma_rxsize);
+ else if (!strncmp(opt, "buf_sz:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz);
+ else if (!strncmp(opt, "tc:", 3))
+ strict_strtoul(opt + 3, 0, (unsigned long *)&tc);
+ else if (!strncmp(opt, "tx_coe:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe);
+ else if (!strncmp(opt, "watchdog:", 9))
+ strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog);
+ else if (!strncmp(opt, "flow_ctrl:", 10))
+ strict_strtoul(opt + 10, 0,
+ (unsigned long *)&flow_ctrl);
+ else if (!strncmp(opt, "pause:", 6))
+ strict_strtoul(opt + 6, 0, (unsigned long *)&pause);
+#ifdef CONFIG_STMMAC_TIMER
+ else if (!strncmp(opt, "tmrate:", 7))
+ strict_strtoul(opt + 7, 0, (unsigned long *)&tmrate);
+#endif
+ }
+ return 0;
+}
+
+__setup("stmmaceth=", stmmac_cmdline_opt);
+#endif
+
+module_init(stmmac_init_module);
+module_exit(stmmac_cleanup_module);
+
+MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet driver");
+MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*******************************************************************************
+ STMMAC Ethernet Driver -- MDIO bus implementation
+ Provides Bus interface for MII registers
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Carl Shaw <carl.shaw@st.com>
+ Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+
+#include "stmmac.h"
+
+#define MII_BUSY 0x00000001
+#define MII_WRITE 0x00000002
+
+/**
+ * stmmac_mdio_read
+ * @bus: points to the mii_bus structure
+ * @phyaddr: MII addr reg bits 15-11
+ * @phyreg: MII addr reg bits 10-6
+ * Description: it reads data from the MII register from within the phy device.
+ * For the 7111 GMAC, we must set the bit 0 in the MII address register while
+ * accessing the PHY registers.
+ * Fortunately, it seems this has no drawback for the 7109 MAC.
+ */
+static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg)
+{
+ struct net_device *ndev = bus->priv;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ unsigned long ioaddr = ndev->base_addr;
+ unsigned int mii_address = priv->mac_type->hw.mii.addr;
+ unsigned int mii_data = priv->mac_type->hw.mii.data;
+
+ int data;
+ u16 regValue = (((phyaddr << 11) & (0x0000F800)) |
+ ((phyreg << 6) & (0x000007C0)));
+ regValue |= MII_BUSY; /* in case of GMAC */
+
+ do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+ writel(regValue, ioaddr + mii_address);
+ do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+ /* Read the data from the MII data register */
+ data = (int)readl(ioaddr + mii_data);
+
+ return data;
+}
+
+/**
+ * stmmac_mdio_write
+ * @bus: points to the mii_bus structure
+ * @phyaddr: MII addr reg bits 15-11
+ * @phyreg: MII addr reg bits 10-6
+ * @phydata: phy data
+ * Description: it writes the data into the MII register from within the device.
+ */
+static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg,
+ u16 phydata)
+{
+ struct net_device *ndev = bus->priv;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ unsigned long ioaddr = ndev->base_addr;
+ unsigned int mii_address = priv->mac_type->hw.mii.addr;
+ unsigned int mii_data = priv->mac_type->hw.mii.data;
+
+ u16 value =
+ (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0)))
+ | MII_WRITE;
+
+ value |= MII_BUSY;
+
+ /* Wait until any existing MII operation is complete */
+ do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+ /* Set the MII address register to write */
+ writel(phydata, ioaddr + mii_data);
+ writel(value, ioaddr + mii_address);
+
+ /* Wait until any existing MII operation is complete */
+ do {} while (((readl(ioaddr + mii_address)) & MII_BUSY) == 1);
+
+ return 0;
+}
+
+/**
+ * stmmac_mdio_reset
+ * @bus: points to the mii_bus structure
+ * Description: reset the MII bus
+ */
+static int stmmac_mdio_reset(struct mii_bus *bus)
+{
+ struct net_device *ndev = bus->priv;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ unsigned long ioaddr = ndev->base_addr;
+ unsigned int mii_address = priv->mac_type->hw.mii.addr;
+
+ if (priv->phy_reset) {
+ pr_debug("stmmac_mdio_reset: calling phy_reset\n");
+ priv->phy_reset(priv->bsp_priv);
+ }
+
+ /* This is a workaround for problems with the STE101P PHY.
+ * It doesn't complete its reset until at least one clock cycle
+ * on MDC, so perform a dummy mdio read.
+ */
+ writel(0, ioaddr + mii_address);
+
+ return 0;
+}
+
+/**
+ * stmmac_mdio_register
+ * @ndev: net device structure
+ * Description: it registers the MII bus
+ */
+int stmmac_mdio_register(struct net_device *ndev)
+{
+ int err = 0;
+ struct mii_bus *new_bus;
+ int *irqlist;
+ struct stmmac_priv *priv = netdev_priv(ndev);
+ int addr, found;
+
+ new_bus = mdiobus_alloc();
+ if (new_bus == NULL)
+ return -ENOMEM;
+
+ irqlist = kzalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+ if (irqlist == NULL) {
+ err = -ENOMEM;
+ goto irqlist_alloc_fail;
+ }
+
+ /* Assign IRQ to phy at address phy_addr */
+ if (priv->phy_addr != -1)
+ irqlist[priv->phy_addr] = priv->phy_irq;
+
+ new_bus->name = "STMMAC MII Bus";
+ new_bus->read = &stmmac_mdio_read;
+ new_bus->write = &stmmac_mdio_write;
+ new_bus->reset = &stmmac_mdio_reset;
+ snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", priv->bus_id);
+ new_bus->priv = ndev;
+ new_bus->irq = irqlist;
+ new_bus->phy_mask = priv->phy_mask;
+ new_bus->parent = priv->device;
+ err = mdiobus_register(new_bus);
+ if (err != 0) {
+ pr_err("%s: Cannot register as MDIO bus\n", new_bus->name);
+ goto bus_register_fail;
+ }
+
+ priv->mii = new_bus;
+
+ found = 0;
+ for (addr = 0; addr < 32; addr++) {
+ struct phy_device *phydev = new_bus->phy_map[addr];
+ if (phydev) {
+ if (priv->phy_addr == -1) {
+ priv->phy_addr = addr;
+ phydev->irq = priv->phy_irq;
+ irqlist[addr] = priv->phy_irq;
+ }
+ pr_info("%s: PHY ID %08x at %d IRQ %d (%s)%s\n",
+ ndev->name, phydev->phy_id, addr,
+ phydev->irq, dev_name(&phydev->dev),
+ (addr == priv->phy_addr) ? " active" : "");
+ found = 1;
+ }
+ }
+
+ if (!found)
+ pr_warning("%s: No PHY found\n", ndev->name);
+
+ return 0;
+bus_register_fail:
+ kfree(irqlist);
+irqlist_alloc_fail:
+ kfree(new_bus);
+ return err;
+}
+
+/**
+ * stmmac_mdio_unregister
+ * @ndev: net device structure
+ * Description: it unregisters the MII bus
+ */
+int stmmac_mdio_unregister(struct net_device *ndev)
+{
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ mdiobus_unregister(priv->mii);
+ priv->mii->priv = NULL;
+ kfree(priv->mii);
+
+ return 0;
+}
--- /dev/null
+/*******************************************************************************
+ STMMAC external timer support.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/etherdevice.h>
+#include "stmmac_timer.h"
+
+static void stmmac_timer_handler(void *data)
+{
+ struct net_device *dev = (struct net_device *)data;
+
+ stmmac_schedule(dev);
+
+ return;
+}
+
+#define STMMAC_TIMER_MSG(timer, freq) \
+printk(KERN_INFO "stmmac_timer: %s Timer ON (freq %dHz)\n", timer, freq);
+
+#if defined(CONFIG_STMMAC_RTC_TIMER)
+#include <linux/rtc.h>
+static struct rtc_device *stmmac_rtc;
+static rtc_task_t stmmac_task;
+
+static void stmmac_rtc_start(unsigned int new_freq)
+{
+ rtc_irq_set_freq(stmmac_rtc, &stmmac_task, new_freq);
+ rtc_irq_set_state(stmmac_rtc, &stmmac_task, 1);
+ return;
+}
+
+static void stmmac_rtc_stop(void)
+{
+ rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0);
+ return;
+}
+
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
+{
+ stmmac_task.private_data = dev;
+ stmmac_task.func = stmmac_timer_handler;
+
+ stmmac_rtc = rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE);
+ if (stmmac_rtc == NULL) {
+ pr_error("open rtc device failed\n");
+ return -ENODEV;
+ }
+
+ rtc_irq_register(stmmac_rtc, &stmmac_task);
+
+ /* Periodic mode is not supported */
+ if ((rtc_irq_set_freq(stmmac_rtc, &stmmac_task, tm->freq) < 0)) {
+ pr_error("set periodic failed\n");
+ rtc_irq_unregister(stmmac_rtc, &stmmac_task);
+ rtc_class_close(stmmac_rtc);
+ return -1;
+ }
+
+ STMMAC_TIMER_MSG(CONFIG_RTC_HCTOSYS_DEVICE, tm->freq);
+
+ tm->timer_start = stmmac_rtc_start;
+ tm->timer_stop = stmmac_rtc_stop;
+
+ return 0;
+}
+
+int stmmac_close_ext_timer(void)
+{
+ rtc_irq_set_state(stmmac_rtc, &stmmac_task, 0);
+ rtc_irq_unregister(stmmac_rtc, &stmmac_task);
+ rtc_class_close(stmmac_rtc);
+ return 0;
+}
+
+#elif defined(CONFIG_STMMAC_TMU_TIMER)
+#include <linux/clk.h>
+#define TMU_CHANNEL "tmu2_clk"
+static struct clk *timer_clock;
+
+static void stmmac_tmu_start(unsigned int new_freq)
+{
+ clk_set_rate(timer_clock, new_freq);
+ clk_enable(timer_clock);
+ return;
+}
+
+static void stmmac_tmu_stop(void)
+{
+ clk_disable(timer_clock);
+ return;
+}
+
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm)
+{
+ timer_clock = clk_get(NULL, TMU_CHANNEL);
+
+ if (timer_clock == NULL)
+ return -1;
+
+ if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) {
+ timer_clock = NULL;
+ return -1;
+ }
+
+ STMMAC_TIMER_MSG("TMU2", tm->freq);
+ tm->timer_start = stmmac_tmu_start;
+ tm->timer_stop = stmmac_tmu_stop;
+
+ return 0;
+}
+
+int stmmac_close_ext_timer(void)
+{
+ clk_disable(timer_clock);
+ tmu2_unregister_user();
+ clk_put(timer_clock);
+ return 0;
+}
+#endif
--- /dev/null
+/*******************************************************************************
+ STMMAC external timer Header File.
+
+ Copyright (C) 2007-2009 STMicroelectronics Ltd
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+*******************************************************************************/
+
+struct stmmac_timer {
+ void (*timer_start) (unsigned int new_freq);
+ void (*timer_stop) (void);
+ unsigned int freq;
+};
+
+/* Open the HW timer device and return 0 in case of success */
+int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm);
+/* Stop the timer and release it */
+int stmmac_close_ext_timer(void);
+/* Function used for scheduling task within the stmmac */
+void stmmac_schedule(struct net_device *dev);
+
+#if defined(CONFIG_STMMAC_TMU_TIMER)
+extern int tmu2_register_user(void *fnt, void *data);
+extern void tmu2_unregister_user(void);
+#endif
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/in.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/delay.h>
.ndo_open = vnet_open,
.ndo_stop = vnet_close,
.ndo_set_multicast_list = vnet_set_rx_mode,
- .ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = vnet_set_mac_addr,
.ndo_validate_addr = eth_validate_addr,
.ndo_tx_timeout = vnet_tx_timeout,
struct tg3 *tp = bp->priv;
u32 val;
- if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
- return -EAGAIN;
+ spin_lock_bh(&tp->lock);
if (tg3_readphy(tp, reg, &val))
- return -EIO;
+ val = -EIO;
+
+ spin_unlock_bh(&tp->lock);
return val;
}
static int tg3_mdio_write(struct mii_bus *bp, int mii_id, int reg, u16 val)
{
struct tg3 *tp = bp->priv;
+ u32 ret = 0;
- if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
- return -EAGAIN;
+ spin_lock_bh(&tp->lock);
if (tg3_writephy(tp, reg, val))
- return -EIO;
+ ret = -EIO;
- return 0;
+ spin_unlock_bh(&tp->lock);
+
+ return ret;
}
static int tg3_mdio_reset(struct mii_bus *bp)
static void tg3_mdio_start(struct tg3 *tp)
{
- if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
- mutex_lock(&tp->mdio_bus->mdio_lock);
- tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
- mutex_unlock(&tp->mdio_bus->mdio_lock);
- }
-
tp->mi_mode &= ~MAC_MI_MODE_AUTO_POLL;
tw32_f(MAC_MI_MODE, tp->mi_mode);
udelay(80);
tg3_mdio_config_5785(tp);
}
-static void tg3_mdio_stop(struct tg3 *tp)
-{
- if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
- mutex_lock(&tp->mdio_bus->mdio_lock);
- tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_PAUSED;
- mutex_unlock(&tp->mdio_bus->mdio_lock);
- }
-}
-
static int tg3_mdio_init(struct tg3 *tp)
{
int i;
tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED;
mdiobus_unregister(tp->mdio_bus);
mdiobus_free(tp->mdio_bus);
- tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
}
}
struct tg3 *tp = netdev_priv(dev);
struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR];
- spin_lock(&tp->lock);
+ spin_lock_bh(&tp->lock);
mac_mode = tp->mac_mode & ~(MAC_MODE_PORT_MODE_MASK |
MAC_MODE_HALF_DUPLEX);
tp->link_config.active_speed = phydev->speed;
tp->link_config.active_duplex = phydev->duplex;
- spin_unlock(&tp->lock);
+ spin_unlock_bh(&tp->lock);
if (linkmesg)
tg3_link_report(tp);
tg3_nvram_lock(tp);
- tg3_mdio_stop(tp);
-
tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
/* No matching tg3_nvram_unlock() after this because
del_timer_sync(&tp->timer);
+ tg3_phy_stop(tp);
+
tg3_full_lock(tp, 1);
#if 0
tg3_dump_state(tp);
struct tx_ring_info {
struct sk_buff *skb;
- u32 prev_vlan_tag;
};
struct tg3_config_info {
#define TG3_FLG3_5701_DMA_BUG 0x00000008
#define TG3_FLG3_USE_PHYLIB 0x00000010
#define TG3_FLG3_MDIOBUS_INITED 0x00000020
-#define TG3_FLG3_MDIOBUS_PAUSED 0x00000040
#define TG3_FLG3_PHY_CONNECTED 0x00000080
#define TG3_FLG3_RGMII_STD_IBND_DISABLE 0x00000100
#define TG3_FLG3_RGMII_EXT_IBND_RX_EN 0x00000200
#define IBMTR_DEBUG_MESSAGES 0
#include <linux/module.h>
+#include <linux/sched.h>
#ifdef PCMCIA /* required for ibmtr_cs.c to build */
#undef MODULE /* yes, really */
} else {
char **prphase = printphase;
char **prerror = printerror;
+ int pnr = err / 16 - 1;
+ int enr = err % 16 - 1;
DPRINTK("TR Adapter misc open failure, error code = ");
- printk("0x%x, Phase: %s, Error: %s\n",
- err, prphase[err/16 -1], prerror[err%16 -1]);
+ if (pnr < 0 || pnr >= ARRAY_SIZE(printphase) ||
+ enr < 0 ||
+ enr >= ARRAY_SIZE(printerror))
+ printk("0x%x, invalid Phase/Error.", err);
+ else
+ printk("0x%x, Phase: %s, Error: %s\n", err,
+ prphase[pnr], prerror[enr]);
printk(" retrying after %ds delay...\n",
TR_RETRY_INTERVAL/HZ);
}
char *name;
unsigned long flags = 0;
- err = -EINVAL;
-
if (!capable(CAP_NET_ADMIN))
return -EPERM;
err = security_tun_dev_create();
flags |= TUN_TAP_DEV;
name = "tap%d";
} else
- goto failed;
+ return -EINVAL;
if (*ifr->ifr_name)
name = ifr->ifr_name;
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/errno.h>
USB_DEVICE(0x0fe6, 0x8101), /* DM9601 USB to Fast Ethernet Adapter */
.driver_info = (unsigned long)&dm9601_info,
},
+ {
+ USB_DEVICE(0x0a46, 0x9000), /* DM9000E */
+ .driver_info = (unsigned long)&dm9601_info,
+ },
{}, // END
};
int timeout)
{
struct usb_ctrlrequest *dr;
+ int retval;
dbg("kaweth_control()");
return -ENOMEM;
}
- dr->bRequestType= requesttype;
+ dr->bRequestType = requesttype;
dr->bRequest = request;
dr->wValue = cpu_to_le16(value);
dr->wIndex = cpu_to_le16(index);
dr->wLength = cpu_to_le16(size);
- return kaweth_internal_control_msg(kaweth->dev,
- pipe,
- dr,
- data,
- size,
- timeout);
+ retval = kaweth_internal_control_msg(kaweth->dev,
+ pipe,
+ dr,
+ data,
+ size,
+ timeout);
+
+ kfree(dr);
+ return retval;
}
/****************************************************************
static struct usb_eth_dev usb_dev_id[] = {
#define PEGASUS_DEV(pn, vid, pid, flags) \
{.name = pn, .vendor = vid, .device = pid, .private = flags},
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+ PEGASUS_DEV(pn, vid, pid, flags)
#include "pegasus.h"
#undef PEGASUS_DEV
+#undef PEGASUS_DEV_CLASS
{NULL, 0, 0, 0},
{NULL, 0, 0, 0}
};
static struct usb_device_id pegasus_ids[] = {
#define PEGASUS_DEV(pn, vid, pid, flags) \
{.match_flags = USB_DEVICE_ID_MATCH_DEVICE, .idVendor = vid, .idProduct = pid},
+/*
+ * The Belkin F8T012xx1 bluetooth adaptor has the same vendor and product
+ * IDs as the Belkin F5D5050, so we need to teach the pegasus driver to
+ * ignore adaptors belonging to the "Wireless" class 0xE0. For this one
+ * case anyway, seeing as the pegasus is for "Wired" adaptors.
+ */
+#define PEGASUS_DEV_CLASS(pn, vid, pid, dclass, flags) \
+ {.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_DEV_CLASS), \
+ .idVendor = vid, .idProduct = pid, .bDeviceClass = dclass},
#include "pegasus.h"
#undef PEGASUS_DEV
+#undef PEGASUS_DEV_CLASS
{},
{}
};
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
+/*
+ * Distinguish between this Belkin adaptor and the Belkin bluetooth adaptors
+ * with the same product IDs by checking the device class too.
+ */
+PEGASUS_DEV_CLASS( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121, 0x00,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
DEFAULT_GPIO_RESET )
retval = -EINVAL;
goto halt_fail_and_release;
}
- dev->hard_mtu = tmp;
- net->mtu = dev->hard_mtu - net->hard_header_len;
dev_warn(&intf->dev,
"dev can't take %u byte packets (max %u), "
"adjusting MTU to %u\n",
- dev->hard_mtu, tmp, net->mtu);
+ dev->hard_mtu, tmp, tmp - net->hard_header_len);
+ dev->hard_mtu = tmp;
+ net->mtu = dev->hard_mtu - net->hard_header_len;
}
/* REVISIT: peripheral "alignment" request is ignored ... */
goto halt_fail_and_release;
}
memcpy(net->dev_addr, bp, ETH_ALEN);
+ memcpy(net->perm_addr, bp, ETH_ALEN);
/* set a nonzero filter to enable data transfers */
memset(u.set, 0, sizeof *u.set);
.rx_fixup = smsc95xx_rx_fixup,
.tx_fixup = smsc95xx_tx_fixup,
.status = smsc95xx_status,
- .flags = FLAG_ETHER,
+ .flags = FLAG_ETHER | FLAG_SEND_ZLP,
};
static const struct usb_device_id products[] = {
USB_DEVICE(0x0424, 0x9500),
.driver_info = (unsigned long) &smsc95xx_info,
},
+ {
+ /* SMSC9505 USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9505),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E00),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device */
+ USB_DEVICE(0x0424, 0x9E01),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
{
/* SMSC9512/9514 USB Hub & Ethernet Device */
USB_DEVICE(0x0424, 0xec00),
.driver_info = (unsigned long) &smsc95xx_info,
},
+ {
+ /* SMSC9500 USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9900),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505 USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9901),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9902),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9903),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device (SAL10) */
+ USB_DEVICE(0x0424, 0x9904),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (HAL) */
+ USB_DEVICE(0x0424, 0x9905),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9505A USB Ethernet Device (HAL) */
+ USB_DEVICE(0x0424, 0x9906),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500 USB Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9907),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9500A USB Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9908),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device (Alternate ID) */
+ USB_DEVICE(0x0424, 0x9909),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
{ }, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
* NOTE: strictly conforming cdc-ether devices should expect
* the ZLP here, but ignore the one-byte packet.
*/
- if ((length % dev->maxpacket) == 0) {
+ if (!(info->flags & FLAG_SEND_ZLP) && (length % dev->maxpacket) == 0) {
urb->transfer_buffer_length++;
if (skb_tailroom(skb)) {
skb->data[skb->len] = 0;
-/* A simple network driver using virtio.
+/* A network driver using virtio.
*
* Copyright 2007 Rusty Russell <rusty@rustcorp.com.au> IBM Corporation
*
#include <linux/ethtool.h>
#include <linux/module.h>
#include <linux/virtio.h>
-#include <linux/virtio_ids.h>
#include <linux/virtio_net.h>
#include <linux/scatterlist.h>
#include <linux/if_vlan.h>
struct napi_struct napi;
unsigned int status;
- /* The skb we couldn't send because buffers were full. */
- struct sk_buff *last_xmit_skb;
-
- /* If we need to free in a timer, this is it. */
- struct timer_list xmit_free_timer;
-
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
- /* For cleaning up after transmission. */
- struct tasklet_struct tasklet;
- bool free_in_tasklet;
-
/* I like... big packets and I cannot lie! */
bool big_packets;
struct page *pages;
};
-static inline void *skb_vnet_hdr(struct sk_buff *skb)
+struct skb_vnet_hdr {
+ union {
+ struct virtio_net_hdr hdr;
+ struct virtio_net_hdr_mrg_rxbuf mhdr;
+ };
+ unsigned int num_sg;
+};
+
+static inline struct skb_vnet_hdr *skb_vnet_hdr(struct sk_buff *skb)
{
- return (struct virtio_net_hdr *)skb->cb;
+ return (struct skb_vnet_hdr *)skb->cb;
}
static void give_a_page(struct virtnet_info *vi, struct page *page)
/* We were probably waiting for more output buffers. */
netif_wake_queue(vi->dev);
-
- /* Make sure we re-xmit last_xmit_skb: if there are no more packets
- * queued, start_xmit won't be called. */
- tasklet_schedule(&vi->tasklet);
}
static void receive_skb(struct net_device *dev, struct sk_buff *skb,
unsigned len)
{
struct virtnet_info *vi = netdev_priv(dev);
- struct virtio_net_hdr *hdr = skb_vnet_hdr(skb);
+ struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
int err;
int i;
}
if (vi->mergeable_rx_bufs) {
- struct virtio_net_hdr_mrg_rxbuf *mhdr = skb_vnet_hdr(skb);
unsigned int copy;
char *p = page_address(skb_shinfo(skb)->frags[0].page);
len = PAGE_SIZE;
len -= sizeof(struct virtio_net_hdr_mrg_rxbuf);
- memcpy(hdr, p, sizeof(*mhdr));
- p += sizeof(*mhdr);
+ memcpy(&hdr->mhdr, p, sizeof(hdr->mhdr));
+ p += sizeof(hdr->mhdr);
copy = len;
if (copy > skb_tailroom(skb))
skb_shinfo(skb)->nr_frags--;
} else {
skb_shinfo(skb)->frags[0].page_offset +=
- sizeof(*mhdr) + copy;
+ sizeof(hdr->mhdr) + copy;
skb_shinfo(skb)->frags[0].size = len;
skb->data_len += len;
skb->len += len;
}
- while (--mhdr->num_buffers) {
+ while (--hdr->mhdr.num_buffers) {
struct sk_buff *nskb;
i = skb_shinfo(skb)->nr_frags;
nskb = vi->rvq->vq_ops->get_buf(vi->rvq, &len);
if (!nskb) {
pr_debug("%s: rx error: %d buffers missing\n",
- dev->name, mhdr->num_buffers);
+ dev->name, hdr->mhdr.num_buffers);
dev->stats.rx_length_errors++;
goto drop;
}
skb->len += len;
}
} else {
- len -= sizeof(struct virtio_net_hdr);
+ len -= sizeof(hdr->hdr);
if (len <= MAX_PACKET_LEN)
trim_pages(vi, skb);
dev->stats.rx_bytes += skb->len;
dev->stats.rx_packets++;
- if (hdr->flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
+ if (hdr->hdr.flags & VIRTIO_NET_HDR_F_NEEDS_CSUM) {
pr_debug("Needs csum!\n");
- if (!skb_partial_csum_set(skb,hdr->csum_start,hdr->csum_offset))
+ if (!skb_partial_csum_set(skb,
+ hdr->hdr.csum_start,
+ hdr->hdr.csum_offset))
goto frame_err;
}
pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
ntohs(skb->protocol), skb->len, skb->pkt_type);
- if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
+ if (hdr->hdr.gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
- switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
+ switch (hdr->hdr.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
case VIRTIO_NET_HDR_GSO_TCPV4:
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
break;
default:
if (net_ratelimit())
printk(KERN_WARNING "%s: bad gso type %u.\n",
- dev->name, hdr->gso_type);
+ dev->name, hdr->hdr.gso_type);
goto frame_err;
}
- if (hdr->gso_type & VIRTIO_NET_HDR_GSO_ECN)
+ if (hdr->hdr.gso_type & VIRTIO_NET_HDR_GSO_ECN)
skb_shinfo(skb)->gso_type |= SKB_GSO_TCP_ECN;
- skb_shinfo(skb)->gso_size = hdr->gso_size;
+ skb_shinfo(skb)->gso_size = hdr->hdr.gso_size;
if (skb_shinfo(skb)->gso_size == 0) {
if (net_ratelimit())
printk(KERN_WARNING "%s: zero gso size.\n",
bool oom = false;
sg_init_table(sg, 2+MAX_SKB_FRAGS);
- for (;;) {
- struct virtio_net_hdr *hdr;
+ do {
+ struct skb_vnet_hdr *hdr;
skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
if (unlikely(!skb)) {
skb_put(skb, MAX_PACKET_LEN);
hdr = skb_vnet_hdr(skb);
- sg_set_buf(sg, hdr, sizeof(*hdr));
+ sg_set_buf(sg, &hdr->hdr, sizeof(hdr->hdr));
if (vi->big_packets) {
for (i = 0; i < MAX_SKB_FRAGS; i++) {
break;
}
vi->num++;
- }
+ } while (err >= num);
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
if (!vi->mergeable_rx_bufs)
return try_fill_recv_maxbufs(vi, gfp);
- for (;;) {
+ do {
skb_frag_t *f;
skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN);
break;
}
vi->num++;
- }
+ } while (err > 0);
if (unlikely(vi->num > vi->max))
vi->max = vi->num;
vi->rvq->vq_ops->kick(vi->rvq);
return received;
}
-static void free_old_xmit_skbs(struct virtnet_info *vi)
+static unsigned int free_old_xmit_skbs(struct virtnet_info *vi)
{
struct sk_buff *skb;
- unsigned int len;
+ unsigned int len, tot_sgs = 0;
while ((skb = vi->svq->vq_ops->get_buf(vi->svq, &len)) != NULL) {
pr_debug("Sent skb %p\n", skb);
__skb_unlink(skb, &vi->send);
vi->dev->stats.tx_bytes += skb->len;
vi->dev->stats.tx_packets++;
- kfree_skb(skb);
+ tot_sgs += skb_vnet_hdr(skb)->num_sg;
+ dev_kfree_skb_any(skb);
}
-}
-
-/* If the virtio transport doesn't always notify us when all in-flight packets
- * are consumed, we fall back to using this function on a timer to free them. */
-static void xmit_free(unsigned long data)
-{
- struct virtnet_info *vi = (void *)data;
-
- netif_tx_lock(vi->dev);
-
- free_old_xmit_skbs(vi);
-
- if (!skb_queue_empty(&vi->send))
- mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
-
- netif_tx_unlock(vi->dev);
+ return tot_sgs;
}
static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
{
- int num, err;
struct scatterlist sg[2+MAX_SKB_FRAGS];
- struct virtio_net_hdr_mrg_rxbuf *mhdr = skb_vnet_hdr(skb);
- struct virtio_net_hdr *hdr = skb_vnet_hdr(skb);
+ struct skb_vnet_hdr *hdr = skb_vnet_hdr(skb);
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
sg_init_table(sg, 2+MAX_SKB_FRAGS);
pr_debug("%s: xmit %p %pM\n", vi->dev->name, skb, dest);
if (skb->ip_summed == CHECKSUM_PARTIAL) {
- hdr->flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
- hdr->csum_start = skb->csum_start - skb_headroom(skb);
- hdr->csum_offset = skb->csum_offset;
+ hdr->hdr.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
+ hdr->hdr.csum_start = skb->csum_start - skb_headroom(skb);
+ hdr->hdr.csum_offset = skb->csum_offset;
} else {
- hdr->flags = 0;
- hdr->csum_offset = hdr->csum_start = 0;
+ hdr->hdr.flags = 0;
+ hdr->hdr.csum_offset = hdr->hdr.csum_start = 0;
}
if (skb_is_gso(skb)) {
- hdr->hdr_len = skb_headlen(skb);
- hdr->gso_size = skb_shinfo(skb)->gso_size;
+ hdr->hdr.hdr_len = skb_headlen(skb);
+ hdr->hdr.gso_size = skb_shinfo(skb)->gso_size;
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4)
- hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
+ hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
- hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
+ hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
else if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP)
- hdr->gso_type = VIRTIO_NET_HDR_GSO_UDP;
+ hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_UDP;
else
BUG();
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCP_ECN)
- hdr->gso_type |= VIRTIO_NET_HDR_GSO_ECN;
+ hdr->hdr.gso_type |= VIRTIO_NET_HDR_GSO_ECN;
} else {
- hdr->gso_type = VIRTIO_NET_HDR_GSO_NONE;
- hdr->gso_size = hdr->hdr_len = 0;
+ hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_NONE;
+ hdr->hdr.gso_size = hdr->hdr.hdr_len = 0;
}
- mhdr->num_buffers = 0;
+ hdr->mhdr.num_buffers = 0;
/* Encode metadata header at front. */
if (vi->mergeable_rx_bufs)
- sg_set_buf(sg, mhdr, sizeof(*mhdr));
+ sg_set_buf(sg, &hdr->mhdr, sizeof(hdr->mhdr));
else
- sg_set_buf(sg, hdr, sizeof(*hdr));
-
- num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
-
- err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
- if (err >= 0 && !vi->free_in_tasklet)
- mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+ sg_set_buf(sg, &hdr->hdr, sizeof(hdr->hdr));
- return err;
-}
-
-static void xmit_tasklet(unsigned long data)
-{
- struct virtnet_info *vi = (void *)data;
-
- netif_tx_lock_bh(vi->dev);
- if (vi->last_xmit_skb && xmit_skb(vi, vi->last_xmit_skb) >= 0) {
- vi->svq->vq_ops->kick(vi->svq);
- vi->last_xmit_skb = NULL;
- }
- if (vi->free_in_tasklet)
- free_old_xmit_skbs(vi);
- netif_tx_unlock_bh(vi->dev);
+ hdr->num_sg = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
+ return vi->svq->vq_ops->add_buf(vi->svq, sg, hdr->num_sg, 0, skb);
}
static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
+ int capacity;
again:
/* Free up any pending old buffers before queueing new ones. */
free_old_xmit_skbs(vi);
- /* If we has a buffer left over from last time, send it now. */
- if (unlikely(vi->last_xmit_skb) &&
- xmit_skb(vi, vi->last_xmit_skb) < 0)
- goto stop_queue;
-
- vi->last_xmit_skb = NULL;
+ /* Try to transmit */
+ capacity = xmit_skb(vi, skb);
- /* Put new one in send queue and do transmit */
- if (likely(skb)) {
- __skb_queue_head(&vi->send, skb);
- if (xmit_skb(vi, skb) < 0) {
- vi->last_xmit_skb = skb;
- skb = NULL;
- goto stop_queue;
+ /* This can happen with OOM and indirect buffers. */
+ if (unlikely(capacity < 0)) {
+ netif_stop_queue(dev);
+ dev_warn(&dev->dev, "Unexpected full queue\n");
+ if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
+ vi->svq->vq_ops->disable_cb(vi->svq);
+ netif_start_queue(dev);
+ goto again;
}
+ return NETDEV_TX_BUSY;
}
-done:
vi->svq->vq_ops->kick(vi->svq);
- return NETDEV_TX_OK;
-
-stop_queue:
- pr_debug("%s: virtio not prepared to send\n", dev->name);
- netif_stop_queue(dev);
- /* Activate callback for using skbs: if this returns false it
- * means some were used in the meantime. */
- if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
- vi->svq->vq_ops->disable_cb(vi->svq);
- netif_start_queue(dev);
- goto again;
- }
- if (skb) {
- /* Drop this skb: we only queue one. */
- vi->dev->stats.tx_dropped++;
- kfree_skb(skb);
+ /*
+ * Put new one in send queue. You'd expect we'd need this before
+ * xmit_skb calls add_buf(), since the callback can be triggered
+ * immediately after that. But since the callback just triggers
+ * another call back here, normal network xmit locking prevents the
+ * race.
+ */
+ __skb_queue_head(&vi->send, skb);
+
+ /* Don't wait up for transmitted skbs to be freed. */
+ skb_orphan(skb);
+ nf_reset(skb);
+
+ /* Apparently nice girls don't return TX_BUSY; stop the queue
+ * before it gets out of hand. Naturally, this wastes entries. */
+ if (capacity < 2+MAX_SKB_FRAGS) {
+ netif_stop_queue(dev);
+ if (unlikely(!vi->svq->vq_ops->enable_cb(vi->svq))) {
+ /* More just got used, free them then recheck. */
+ capacity += free_old_xmit_skbs(vi);
+ if (capacity >= 2+MAX_SKB_FRAGS) {
+ netif_start_queue(dev);
+ vi->svq->vq_ops->disable_cb(vi->svq);
+ }
+ }
}
- goto done;
+
+ return NETDEV_TX_OK;
}
static int virtnet_set_mac_address(struct net_device *dev, void *p)
vi->pages = NULL;
INIT_DELAYED_WORK(&vi->refill, refill_work);
- /* If they give us a callback when all buffers are done, we don't need
- * the timer. */
- vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY);
-
/* If we can receive ANY GSO packets, we must allocate large ones. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4)
|| virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6)
skb_queue_head_init(&vi->recv);
skb_queue_head_init(&vi->send);
- tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi);
-
- if (!vi->free_in_tasklet)
- setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi);
-
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
return err;
}
-static void virtnet_remove(struct virtio_device *vdev)
+static void __devexit virtnet_remove(struct virtio_device *vdev)
{
struct virtnet_info *vi = vdev->priv;
struct sk_buff *skb;
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
- if (!vi->free_in_tasklet)
- del_timer_sync(&vi->xmit_free_timer);
-
/* Free our skbs in send and recv queues, if any. */
while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
kfree_skb(skb);
VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO,
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
- VIRTIO_F_NOTIFY_ON_EMPTY,
};
static struct virtio_driver virtio_net = {
--- /dev/null
+################################################################################
+#
+# Linux driver for VMware's vmxnet3 ethernet NIC.
+#
+# Copyright (C) 2007-2009, VMware, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; version 2 of the License and no later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+# NON INFRINGEMENT. See the GNU General Public License for more
+# details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+#
+#
+################################################################################
+
+#
+# Makefile for the VMware vmxnet3 ethernet NIC driver
+#
+
+obj-$(CONFIG_VMXNET3) += vmxnet3.o
+
+vmxnet3-objs := vmxnet3_drv.o vmxnet3_ethtool.o
--- /dev/null
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#ifndef _UPT1_DEFS_H
+#define _UPT1_DEFS_H
+
+struct UPT1_TxStats {
+ u64 TSOPktsTxOK; /* TSO pkts post-segmentation */
+ u64 TSOBytesTxOK;
+ u64 ucastPktsTxOK;
+ u64 ucastBytesTxOK;
+ u64 mcastPktsTxOK;
+ u64 mcastBytesTxOK;
+ u64 bcastPktsTxOK;
+ u64 bcastBytesTxOK;
+ u64 pktsTxError;
+ u64 pktsTxDiscard;
+};
+
+struct UPT1_RxStats {
+ u64 LROPktsRxOK; /* LRO pkts */
+ u64 LROBytesRxOK; /* bytes from LRO pkts */
+ /* the following counters are for pkts from the wire, i.e., pre-LRO */
+ u64 ucastPktsRxOK;
+ u64 ucastBytesRxOK;
+ u64 mcastPktsRxOK;
+ u64 mcastBytesRxOK;
+ u64 bcastPktsRxOK;
+ u64 bcastBytesRxOK;
+ u64 pktsRxOutOfBuf;
+ u64 pktsRxError;
+};
+
+/* interrupt moderation level */
+enum {
+ UPT1_IML_NONE = 0, /* no interrupt moderation */
+ UPT1_IML_HIGHEST = 7, /* least intr generated */
+ UPT1_IML_ADAPTIVE = 8, /* adpative intr moderation */
+};
+/* values for UPT1_RSSConf.hashFunc */
+enum {
+ UPT1_RSS_HASH_TYPE_NONE = 0x0,
+ UPT1_RSS_HASH_TYPE_IPV4 = 0x01,
+ UPT1_RSS_HASH_TYPE_TCP_IPV4 = 0x02,
+ UPT1_RSS_HASH_TYPE_IPV6 = 0x04,
+ UPT1_RSS_HASH_TYPE_TCP_IPV6 = 0x08,
+};
+
+enum {
+ UPT1_RSS_HASH_FUNC_NONE = 0x0,
+ UPT1_RSS_HASH_FUNC_TOEPLITZ = 0x01,
+};
+
+#define UPT1_RSS_MAX_KEY_SIZE 40
+#define UPT1_RSS_MAX_IND_TABLE_SIZE 128
+
+struct UPT1_RSSConf {
+ u16 hashType;
+ u16 hashFunc;
+ u16 hashKeySize;
+ u16 indTableSize;
+ u8 hashKey[UPT1_RSS_MAX_KEY_SIZE];
+ u8 indTable[UPT1_RSS_MAX_IND_TABLE_SIZE];
+};
+
+/* features */
+enum {
+ UPT1_F_RXCSUM = 0x0001, /* rx csum verification */
+ UPT1_F_RSS = 0x0002,
+ UPT1_F_RXVLAN = 0x0004, /* VLAN tag stripping */
+ UPT1_F_LRO = 0x0008,
+};
+#endif
--- /dev/null
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#ifndef _VMXNET3_DEFS_H_
+#define _VMXNET3_DEFS_H_
+
+#include "upt1_defs.h"
+
+/* all registers are 32 bit wide */
+/* BAR 1 */
+enum {
+ VMXNET3_REG_VRRS = 0x0, /* Vmxnet3 Revision Report Selection */
+ VMXNET3_REG_UVRS = 0x8, /* UPT Version Report Selection */
+ VMXNET3_REG_DSAL = 0x10, /* Driver Shared Address Low */
+ VMXNET3_REG_DSAH = 0x18, /* Driver Shared Address High */
+ VMXNET3_REG_CMD = 0x20, /* Command */
+ VMXNET3_REG_MACL = 0x28, /* MAC Address Low */
+ VMXNET3_REG_MACH = 0x30, /* MAC Address High */
+ VMXNET3_REG_ICR = 0x38, /* Interrupt Cause Register */
+ VMXNET3_REG_ECR = 0x40 /* Event Cause Register */
+};
+
+/* BAR 0 */
+enum {
+ VMXNET3_REG_IMR = 0x0, /* Interrupt Mask Register */
+ VMXNET3_REG_TXPROD = 0x600, /* Tx Producer Index */
+ VMXNET3_REG_RXPROD = 0x800, /* Rx Producer Index for ring 1 */
+ VMXNET3_REG_RXPROD2 = 0xA00 /* Rx Producer Index for ring 2 */
+};
+
+#define VMXNET3_PT_REG_SIZE 4096 /* BAR 0 */
+#define VMXNET3_VD_REG_SIZE 4096 /* BAR 1 */
+
+#define VMXNET3_REG_ALIGN 8 /* All registers are 8-byte aligned. */
+#define VMXNET3_REG_ALIGN_MASK 0x7
+
+/* I/O Mapped access to registers */
+#define VMXNET3_IO_TYPE_PT 0
+#define VMXNET3_IO_TYPE_VD 1
+#define VMXNET3_IO_ADDR(type, reg) (((type) << 24) | ((reg) & 0xFFFFFF))
+#define VMXNET3_IO_TYPE(addr) ((addr) >> 24)
+#define VMXNET3_IO_REG(addr) ((addr) & 0xFFFFFF)
+
+enum {
+ VMXNET3_CMD_FIRST_SET = 0xCAFE0000,
+ VMXNET3_CMD_ACTIVATE_DEV = VMXNET3_CMD_FIRST_SET,
+ VMXNET3_CMD_QUIESCE_DEV,
+ VMXNET3_CMD_RESET_DEV,
+ VMXNET3_CMD_UPDATE_RX_MODE,
+ VMXNET3_CMD_UPDATE_MAC_FILTERS,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS,
+ VMXNET3_CMD_UPDATE_RSSIDT,
+ VMXNET3_CMD_UPDATE_IML,
+ VMXNET3_CMD_UPDATE_PMCFG,
+ VMXNET3_CMD_UPDATE_FEATURE,
+ VMXNET3_CMD_LOAD_PLUGIN,
+
+ VMXNET3_CMD_FIRST_GET = 0xF00D0000,
+ VMXNET3_CMD_GET_QUEUE_STATUS = VMXNET3_CMD_FIRST_GET,
+ VMXNET3_CMD_GET_STATS,
+ VMXNET3_CMD_GET_LINK,
+ VMXNET3_CMD_GET_PERM_MAC_LO,
+ VMXNET3_CMD_GET_PERM_MAC_HI,
+ VMXNET3_CMD_GET_DID_LO,
+ VMXNET3_CMD_GET_DID_HI,
+ VMXNET3_CMD_GET_DEV_EXTRA_INFO,
+ VMXNET3_CMD_GET_CONF_INTR
+};
+
+struct Vmxnet3_TxDesc {
+ u64 addr;
+
+ u32 len:14;
+ u32 gen:1; /* generation bit */
+ u32 rsvd:1;
+ u32 dtype:1; /* descriptor type */
+ u32 ext1:1;
+ u32 msscof:14; /* MSS, checksum offset, flags */
+
+ u32 hlen:10; /* header len */
+ u32 om:2; /* offload mode */
+ u32 eop:1; /* End Of Packet */
+ u32 cq:1; /* completion request */
+ u32 ext2:1;
+ u32 ti:1; /* VLAN Tag Insertion */
+ u32 tci:16; /* Tag to Insert */
+};
+
+/* TxDesc.OM values */
+#define VMXNET3_OM_NONE 0
+#define VMXNET3_OM_CSUM 2
+#define VMXNET3_OM_TSO 3
+
+/* fields in TxDesc we access w/o using bit fields */
+#define VMXNET3_TXD_EOP_SHIFT 12
+#define VMXNET3_TXD_CQ_SHIFT 13
+#define VMXNET3_TXD_GEN_SHIFT 14
+
+#define VMXNET3_TXD_CQ (1 << VMXNET3_TXD_CQ_SHIFT)
+#define VMXNET3_TXD_EOP (1 << VMXNET3_TXD_EOP_SHIFT)
+#define VMXNET3_TXD_GEN (1 << VMXNET3_TXD_GEN_SHIFT)
+
+#define VMXNET3_HDR_COPY_SIZE 128
+
+
+struct Vmxnet3_TxDataDesc {
+ u8 data[VMXNET3_HDR_COPY_SIZE];
+};
+
+
+struct Vmxnet3_TxCompDesc {
+ u32 txdIdx:12; /* Index of the EOP TxDesc */
+ u32 ext1:20;
+
+ u32 ext2;
+ u32 ext3;
+
+ u32 rsvd:24;
+ u32 type:7; /* completion type */
+ u32 gen:1; /* generation bit */
+};
+
+
+struct Vmxnet3_RxDesc {
+ u64 addr;
+
+ u32 len:14;
+ u32 btype:1; /* Buffer Type */
+ u32 dtype:1; /* Descriptor type */
+ u32 rsvd:15;
+ u32 gen:1; /* Generation bit */
+
+ u32 ext1;
+};
+
+/* values of RXD.BTYPE */
+#define VMXNET3_RXD_BTYPE_HEAD 0 /* head only */
+#define VMXNET3_RXD_BTYPE_BODY 1 /* body only */
+
+/* fields in RxDesc we access w/o using bit fields */
+#define VMXNET3_RXD_BTYPE_SHIFT 14
+#define VMXNET3_RXD_GEN_SHIFT 31
+
+
+struct Vmxnet3_RxCompDesc {
+ u32 rxdIdx:12; /* Index of the RxDesc */
+ u32 ext1:2;
+ u32 eop:1; /* End of Packet */
+ u32 sop:1; /* Start of Packet */
+ u32 rqID:10; /* rx queue/ring ID */
+ u32 rssType:4; /* RSS hash type used */
+ u32 cnc:1; /* Checksum Not Calculated */
+ u32 ext2:1;
+
+ u32 rssHash; /* RSS hash value */
+
+ u32 len:14; /* data length */
+ u32 err:1; /* Error */
+ u32 ts:1; /* Tag is stripped */
+ u32 tci:16; /* Tag stripped */
+
+ u32 csum:16;
+ u32 tuc:1; /* TCP/UDP Checksum Correct */
+ u32 udp:1; /* UDP packet */
+ u32 tcp:1; /* TCP packet */
+ u32 ipc:1; /* IP Checksum Correct */
+ u32 v6:1; /* IPv6 */
+ u32 v4:1; /* IPv4 */
+ u32 frg:1; /* IP Fragment */
+ u32 fcs:1; /* Frame CRC correct */
+ u32 type:7; /* completion type */
+ u32 gen:1; /* generation bit */
+};
+
+/* fields in RxCompDesc we access via Vmxnet3_GenericDesc.dword[3] */
+#define VMXNET3_RCD_TUC_SHIFT 16
+#define VMXNET3_RCD_IPC_SHIFT 19
+
+/* fields in RxCompDesc we access via Vmxnet3_GenericDesc.qword[1] */
+#define VMXNET3_RCD_TYPE_SHIFT 56
+#define VMXNET3_RCD_GEN_SHIFT 63
+
+/* csum OK for TCP/UDP pkts over IP */
+#define VMXNET3_RCD_CSUM_OK (1 << VMXNET3_RCD_TUC_SHIFT | \
+ 1 << VMXNET3_RCD_IPC_SHIFT)
+
+/* value of RxCompDesc.rssType */
+enum {
+ VMXNET3_RCD_RSS_TYPE_NONE = 0,
+ VMXNET3_RCD_RSS_TYPE_IPV4 = 1,
+ VMXNET3_RCD_RSS_TYPE_TCPIPV4 = 2,
+ VMXNET3_RCD_RSS_TYPE_IPV6 = 3,
+ VMXNET3_RCD_RSS_TYPE_TCPIPV6 = 4,
+};
+
+
+/* a union for accessing all cmd/completion descriptors */
+union Vmxnet3_GenericDesc {
+ u64 qword[2];
+ u32 dword[4];
+ u16 word[8];
+ struct Vmxnet3_TxDesc txd;
+ struct Vmxnet3_RxDesc rxd;
+ struct Vmxnet3_TxCompDesc tcd;
+ struct Vmxnet3_RxCompDesc rcd;
+};
+
+#define VMXNET3_INIT_GEN 1
+
+/* Max size of a single tx buffer */
+#define VMXNET3_MAX_TX_BUF_SIZE (1 << 14)
+
+/* # of tx desc needed for a tx buffer size */
+#define VMXNET3_TXD_NEEDED(size) (((size) + VMXNET3_MAX_TX_BUF_SIZE - 1) / \
+ VMXNET3_MAX_TX_BUF_SIZE)
+
+/* max # of tx descs for a non-tso pkt */
+#define VMXNET3_MAX_TXD_PER_PKT 16
+
+/* Max size of a single rx buffer */
+#define VMXNET3_MAX_RX_BUF_SIZE ((1 << 14) - 1)
+/* Minimum size of a type 0 buffer */
+#define VMXNET3_MIN_T0_BUF_SIZE 128
+#define VMXNET3_MAX_CSUM_OFFSET 1024
+
+/* Ring base address alignment */
+#define VMXNET3_RING_BA_ALIGN 512
+#define VMXNET3_RING_BA_MASK (VMXNET3_RING_BA_ALIGN - 1)
+
+/* Ring size must be a multiple of 32 */
+#define VMXNET3_RING_SIZE_ALIGN 32
+#define VMXNET3_RING_SIZE_MASK (VMXNET3_RING_SIZE_ALIGN - 1)
+
+/* Max ring size */
+#define VMXNET3_TX_RING_MAX_SIZE 4096
+#define VMXNET3_TC_RING_MAX_SIZE 4096
+#define VMXNET3_RX_RING_MAX_SIZE 4096
+#define VMXNET3_RC_RING_MAX_SIZE 8192
+
+/* a list of reasons for queue stop */
+
+enum {
+ VMXNET3_ERR_NOEOP = 0x80000000, /* cannot find the EOP desc of a pkt */
+ VMXNET3_ERR_TXD_REUSE = 0x80000001, /* reuse TxDesc before tx completion */
+ VMXNET3_ERR_BIG_PKT = 0x80000002, /* too many TxDesc for a pkt */
+ VMXNET3_ERR_DESC_NOT_SPT = 0x80000003, /* descriptor type not supported */
+ VMXNET3_ERR_SMALL_BUF = 0x80000004, /* type 0 buffer too small */
+ VMXNET3_ERR_STRESS = 0x80000005, /* stress option firing in vmkernel */
+ VMXNET3_ERR_SWITCH = 0x80000006, /* mode switch failure */
+ VMXNET3_ERR_TXD_INVALID = 0x80000007, /* invalid TxDesc */
+};
+
+/* completion descriptor types */
+#define VMXNET3_CDTYPE_TXCOMP 0 /* Tx Completion Descriptor */
+#define VMXNET3_CDTYPE_RXCOMP 3 /* Rx Completion Descriptor */
+
+enum {
+ VMXNET3_GOS_BITS_UNK = 0, /* unknown */
+ VMXNET3_GOS_BITS_32 = 1,
+ VMXNET3_GOS_BITS_64 = 2,
+};
+
+#define VMXNET3_GOS_TYPE_LINUX 1
+
+
+struct Vmxnet3_GOSInfo {
+ u32 gosBits:2; /* 32-bit or 64-bit? */
+ u32 gosType:4; /* which guest */
+ u32 gosVer:16; /* gos version */
+ u32 gosMisc:10; /* other info about gos */
+};
+
+
+struct Vmxnet3_DriverInfo {
+ u32 version;
+ struct Vmxnet3_GOSInfo gos;
+ u32 vmxnet3RevSpt;
+ u32 uptVerSpt;
+};
+
+
+#define VMXNET3_REV1_MAGIC 0xbabefee1
+
+/*
+ * QueueDescPA must be 128 bytes aligned. It points to an array of
+ * Vmxnet3_TxQueueDesc followed by an array of Vmxnet3_RxQueueDesc.
+ * The number of Vmxnet3_TxQueueDesc/Vmxnet3_RxQueueDesc are specified by
+ * Vmxnet3_MiscConf.numTxQueues/numRxQueues, respectively.
+ */
+#define VMXNET3_QUEUE_DESC_ALIGN 128
+
+
+struct Vmxnet3_MiscConf {
+ struct Vmxnet3_DriverInfo driverInfo;
+ u64 uptFeatures;
+ u64 ddPA; /* driver data PA */
+ u64 queueDescPA; /* queue descriptor table PA */
+ u32 ddLen; /* driver data len */
+ u32 queueDescLen; /* queue desc. table len in bytes */
+ u32 mtu;
+ u16 maxNumRxSG;
+ u8 numTxQueues;
+ u8 numRxQueues;
+ u32 reserved[4];
+};
+
+
+struct Vmxnet3_TxQueueConf {
+ u64 txRingBasePA;
+ u64 dataRingBasePA;
+ u64 compRingBasePA;
+ u64 ddPA; /* driver data */
+ u64 reserved;
+ u32 txRingSize; /* # of tx desc */
+ u32 dataRingSize; /* # of data desc */
+ u32 compRingSize; /* # of comp desc */
+ u32 ddLen; /* size of driver data */
+ u8 intrIdx;
+ u8 _pad[7];
+};
+
+
+struct Vmxnet3_RxQueueConf {
+ u64 rxRingBasePA[2];
+ u64 compRingBasePA;
+ u64 ddPA; /* driver data */
+ u64 reserved;
+ u32 rxRingSize[2]; /* # of rx desc */
+ u32 compRingSize; /* # of rx comp desc */
+ u32 ddLen; /* size of driver data */
+ u8 intrIdx;
+ u8 _pad[7];
+};
+
+
+enum vmxnet3_intr_mask_mode {
+ VMXNET3_IMM_AUTO = 0,
+ VMXNET3_IMM_ACTIVE = 1,
+ VMXNET3_IMM_LAZY = 2
+};
+
+enum vmxnet3_intr_type {
+ VMXNET3_IT_AUTO = 0,
+ VMXNET3_IT_INTX = 1,
+ VMXNET3_IT_MSI = 2,
+ VMXNET3_IT_MSIX = 3
+};
+
+#define VMXNET3_MAX_TX_QUEUES 8
+#define VMXNET3_MAX_RX_QUEUES 16
+/* addition 1 for events */
+#define VMXNET3_MAX_INTRS 25
+
+
+struct Vmxnet3_IntrConf {
+ bool autoMask;
+ u8 numIntrs; /* # of interrupts */
+ u8 eventIntrIdx;
+ u8 modLevels[VMXNET3_MAX_INTRS]; /* moderation level for
+ * each intr */
+ u32 reserved[3];
+};
+
+/* one bit per VLAN ID, the size is in the units of u32 */
+#define VMXNET3_VFT_SIZE (4096 / (sizeof(u32) * 8))
+
+
+struct Vmxnet3_QueueStatus {
+ bool stopped;
+ u8 _pad[3];
+ u32 error;
+};
+
+
+struct Vmxnet3_TxQueueCtrl {
+ u32 txNumDeferred;
+ u32 txThreshold;
+ u64 reserved;
+};
+
+
+struct Vmxnet3_RxQueueCtrl {
+ bool updateRxProd;
+ u8 _pad[7];
+ u64 reserved;
+};
+
+enum {
+ VMXNET3_RXM_UCAST = 0x01, /* unicast only */
+ VMXNET3_RXM_MCAST = 0x02, /* multicast passing the filters */
+ VMXNET3_RXM_BCAST = 0x04, /* broadcast only */
+ VMXNET3_RXM_ALL_MULTI = 0x08, /* all multicast */
+ VMXNET3_RXM_PROMISC = 0x10 /* promiscuous */
+};
+
+struct Vmxnet3_RxFilterConf {
+ u32 rxMode; /* VMXNET3_RXM_xxx */
+ u16 mfTableLen; /* size of the multicast filter table */
+ u16 _pad1;
+ u64 mfTablePA; /* PA of the multicast filters table */
+ u32 vfTable[VMXNET3_VFT_SIZE]; /* vlan filter */
+};
+
+
+#define VMXNET3_PM_MAX_FILTERS 6
+#define VMXNET3_PM_MAX_PATTERN_SIZE 128
+#define VMXNET3_PM_MAX_MASK_SIZE (VMXNET3_PM_MAX_PATTERN_SIZE / 8)
+
+#define VMXNET3_PM_WAKEUP_MAGIC 0x01 /* wake up on magic pkts */
+#define VMXNET3_PM_WAKEUP_FILTER 0x02 /* wake up on pkts matching
+ * filters */
+
+
+struct Vmxnet3_PM_PktFilter {
+ u8 maskSize;
+ u8 patternSize;
+ u8 mask[VMXNET3_PM_MAX_MASK_SIZE];
+ u8 pattern[VMXNET3_PM_MAX_PATTERN_SIZE];
+ u8 pad[6];
+};
+
+
+struct Vmxnet3_PMConf {
+ u16 wakeUpEvents; /* VMXNET3_PM_WAKEUP_xxx */
+ u8 numFilters;
+ u8 pad[5];
+ struct Vmxnet3_PM_PktFilter filters[VMXNET3_PM_MAX_FILTERS];
+};
+
+
+struct Vmxnet3_VariableLenConfDesc {
+ u32 confVer;
+ u32 confLen;
+ u64 confPA;
+};
+
+
+struct Vmxnet3_TxQueueDesc {
+ struct Vmxnet3_TxQueueCtrl ctrl;
+ struct Vmxnet3_TxQueueConf conf;
+
+ /* Driver read after a GET command */
+ struct Vmxnet3_QueueStatus status;
+ struct UPT1_TxStats stats;
+ u8 _pad[88]; /* 128 aligned */
+};
+
+
+struct Vmxnet3_RxQueueDesc {
+ struct Vmxnet3_RxQueueCtrl ctrl;
+ struct Vmxnet3_RxQueueConf conf;
+ /* Driver read after a GET commad */
+ struct Vmxnet3_QueueStatus status;
+ struct UPT1_RxStats stats;
+ u8 __pad[88]; /* 128 aligned */
+};
+
+
+struct Vmxnet3_DSDevRead {
+ /* read-only region for device, read by dev in response to a SET cmd */
+ struct Vmxnet3_MiscConf misc;
+ struct Vmxnet3_IntrConf intrConf;
+ struct Vmxnet3_RxFilterConf rxFilterConf;
+ struct Vmxnet3_VariableLenConfDesc rssConfDesc;
+ struct Vmxnet3_VariableLenConfDesc pmConfDesc;
+ struct Vmxnet3_VariableLenConfDesc pluginConfDesc;
+};
+
+/* All structures in DriverShared are padded to multiples of 8 bytes */
+struct Vmxnet3_DriverShared {
+ u32 magic;
+ /* make devRead start at 64bit boundaries */
+ u32 pad;
+ struct Vmxnet3_DSDevRead devRead;
+ u32 ecr;
+ u32 reserved[5];
+};
+
+
+#define VMXNET3_ECR_RQERR (1 << 0)
+#define VMXNET3_ECR_TQERR (1 << 1)
+#define VMXNET3_ECR_LINK (1 << 2)
+#define VMXNET3_ECR_DIC (1 << 3)
+#define VMXNET3_ECR_DEBUG (1 << 4)
+
+/* flip the gen bit of a ring */
+#define VMXNET3_FLIP_RING_GEN(gen) ((gen) = (gen) ^ 0x1)
+
+/* only use this if moving the idx won't affect the gen bit */
+#define VMXNET3_INC_RING_IDX_ONLY(idx, ring_size) \
+ do {\
+ (idx)++;\
+ if (unlikely((idx) == (ring_size))) {\
+ (idx) = 0;\
+ } \
+ } while (0)
+
+#define VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid) \
+ (vfTable[vid >> 5] |= (1 << (vid & 31)))
+#define VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid) \
+ (vfTable[vid >> 5] &= ~(1 << (vid & 31)))
+
+#define VMXNET3_VFTABLE_ENTRY_IS_SET(vfTable, vid) \
+ ((vfTable[vid >> 5] & (1 << (vid & 31))) != 0)
+
+#define VMXNET3_MAX_MTU 9000
+#define VMXNET3_MIN_MTU 60
+
+#define VMXNET3_LINK_UP (10000 << 16 | 1) /* 10 Gbps, up */
+#define VMXNET3_LINK_DOWN 0
+
+#endif /* _VMXNET3_DEFS_H_ */
--- /dev/null
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#include "vmxnet3_int.h"
+
+char vmxnet3_driver_name[] = "vmxnet3";
+#define VMXNET3_DRIVER_DESC "VMware vmxnet3 virtual NIC driver"
+
+
+/*
+ * PCI Device ID Table
+ * Last entry must be all 0s
+ */
+static const struct pci_device_id vmxnet3_pciid_table[] = {
+ {PCI_VDEVICE(VMWARE, PCI_DEVICE_ID_VMWARE_VMXNET3)},
+ {0}
+};
+
+MODULE_DEVICE_TABLE(pci, vmxnet3_pciid_table);
+
+static atomic_t devices_found;
+
+
+/*
+ * Enable/Disable the given intr
+ */
+static void
+vmxnet3_enable_intr(struct vmxnet3_adapter *adapter, unsigned intr_idx)
+{
+ VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_IMR + intr_idx * 8, 0);
+}
+
+
+static void
+vmxnet3_disable_intr(struct vmxnet3_adapter *adapter, unsigned intr_idx)
+{
+ VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_IMR + intr_idx * 8, 1);
+}
+
+
+/*
+ * Enable/Disable all intrs used by the device
+ */
+static void
+vmxnet3_enable_all_intrs(struct vmxnet3_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->intr.num_intrs; i++)
+ vmxnet3_enable_intr(adapter, i);
+}
+
+
+static void
+vmxnet3_disable_all_intrs(struct vmxnet3_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->intr.num_intrs; i++)
+ vmxnet3_disable_intr(adapter, i);
+}
+
+
+static void
+vmxnet3_ack_events(struct vmxnet3_adapter *adapter, u32 events)
+{
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_ECR, events);
+}
+
+
+static bool
+vmxnet3_tq_stopped(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
+{
+ return netif_queue_stopped(adapter->netdev);
+}
+
+
+static void
+vmxnet3_tq_start(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
+{
+ tq->stopped = false;
+ netif_start_queue(adapter->netdev);
+}
+
+
+static void
+vmxnet3_tq_wake(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
+{
+ tq->stopped = false;
+ netif_wake_queue(adapter->netdev);
+}
+
+
+static void
+vmxnet3_tq_stop(struct vmxnet3_tx_queue *tq, struct vmxnet3_adapter *adapter)
+{
+ tq->stopped = true;
+ tq->num_stop++;
+ netif_stop_queue(adapter->netdev);
+}
+
+
+/*
+ * Check the link state. This may start or stop the tx queue.
+ */
+static void
+vmxnet3_check_link(struct vmxnet3_adapter *adapter)
+{
+ u32 ret;
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_LINK);
+ ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
+ adapter->link_speed = ret >> 16;
+ if (ret & 1) { /* Link is up. */
+ printk(KERN_INFO "%s: NIC Link is Up %d Mbps\n",
+ adapter->netdev->name, adapter->link_speed);
+ if (!netif_carrier_ok(adapter->netdev))
+ netif_carrier_on(adapter->netdev);
+
+ vmxnet3_tq_start(&adapter->tx_queue, adapter);
+ } else {
+ printk(KERN_INFO "%s: NIC Link is Down\n",
+ adapter->netdev->name);
+ if (netif_carrier_ok(adapter->netdev))
+ netif_carrier_off(adapter->netdev);
+
+ vmxnet3_tq_stop(&adapter->tx_queue, adapter);
+ }
+}
+
+
+static void
+vmxnet3_process_events(struct vmxnet3_adapter *adapter)
+{
+ u32 events = adapter->shared->ecr;
+ if (!events)
+ return;
+
+ vmxnet3_ack_events(adapter, events);
+
+ /* Check if link state has changed */
+ if (events & VMXNET3_ECR_LINK)
+ vmxnet3_check_link(adapter);
+
+ /* Check if there is an error on xmit/recv queues */
+ if (events & (VMXNET3_ECR_TQERR | VMXNET3_ECR_RQERR)) {
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_GET_QUEUE_STATUS);
+
+ if (adapter->tqd_start->status.stopped) {
+ printk(KERN_ERR "%s: tq error 0x%x\n",
+ adapter->netdev->name,
+ adapter->tqd_start->status.error);
+ }
+ if (adapter->rqd_start->status.stopped) {
+ printk(KERN_ERR "%s: rq error 0x%x\n",
+ adapter->netdev->name,
+ adapter->rqd_start->status.error);
+ }
+
+ schedule_work(&adapter->work);
+ }
+}
+
+
+static void
+vmxnet3_unmap_tx_buf(struct vmxnet3_tx_buf_info *tbi,
+ struct pci_dev *pdev)
+{
+ if (tbi->map_type == VMXNET3_MAP_SINGLE)
+ pci_unmap_single(pdev, tbi->dma_addr, tbi->len,
+ PCI_DMA_TODEVICE);
+ else if (tbi->map_type == VMXNET3_MAP_PAGE)
+ pci_unmap_page(pdev, tbi->dma_addr, tbi->len,
+ PCI_DMA_TODEVICE);
+ else
+ BUG_ON(tbi->map_type != VMXNET3_MAP_NONE);
+
+ tbi->map_type = VMXNET3_MAP_NONE; /* to help debugging */
+}
+
+
+static int
+vmxnet3_unmap_pkt(u32 eop_idx, struct vmxnet3_tx_queue *tq,
+ struct pci_dev *pdev, struct vmxnet3_adapter *adapter)
+{
+ struct sk_buff *skb;
+ int entries = 0;
+
+ /* no out of order completion */
+ BUG_ON(tq->buf_info[eop_idx].sop_idx != tq->tx_ring.next2comp);
+ BUG_ON(tq->tx_ring.base[eop_idx].txd.eop != 1);
+
+ skb = tq->buf_info[eop_idx].skb;
+ BUG_ON(skb == NULL);
+ tq->buf_info[eop_idx].skb = NULL;
+
+ VMXNET3_INC_RING_IDX_ONLY(eop_idx, tq->tx_ring.size);
+
+ while (tq->tx_ring.next2comp != eop_idx) {
+ vmxnet3_unmap_tx_buf(tq->buf_info + tq->tx_ring.next2comp,
+ pdev);
+
+ /* update next2comp w/o tx_lock. Since we are marking more,
+ * instead of less, tx ring entries avail, the worst case is
+ * that the tx routine incorrectly re-queues a pkt due to
+ * insufficient tx ring entries.
+ */
+ vmxnet3_cmd_ring_adv_next2comp(&tq->tx_ring);
+ entries++;
+ }
+
+ dev_kfree_skb_any(skb);
+ return entries;
+}
+
+
+static int
+vmxnet3_tq_tx_complete(struct vmxnet3_tx_queue *tq,
+ struct vmxnet3_adapter *adapter)
+{
+ int completed = 0;
+ union Vmxnet3_GenericDesc *gdesc;
+
+ gdesc = tq->comp_ring.base + tq->comp_ring.next2proc;
+ while (gdesc->tcd.gen == tq->comp_ring.gen) {
+ completed += vmxnet3_unmap_pkt(gdesc->tcd.txdIdx, tq,
+ adapter->pdev, adapter);
+
+ vmxnet3_comp_ring_adv_next2proc(&tq->comp_ring);
+ gdesc = tq->comp_ring.base + tq->comp_ring.next2proc;
+ }
+
+ if (completed) {
+ spin_lock(&tq->tx_lock);
+ if (unlikely(vmxnet3_tq_stopped(tq, adapter) &&
+ vmxnet3_cmd_ring_desc_avail(&tq->tx_ring) >
+ VMXNET3_WAKE_QUEUE_THRESHOLD(tq) &&
+ netif_carrier_ok(adapter->netdev))) {
+ vmxnet3_tq_wake(tq, adapter);
+ }
+ spin_unlock(&tq->tx_lock);
+ }
+ return completed;
+}
+
+
+static void
+vmxnet3_tq_cleanup(struct vmxnet3_tx_queue *tq,
+ struct vmxnet3_adapter *adapter)
+{
+ int i;
+
+ while (tq->tx_ring.next2comp != tq->tx_ring.next2fill) {
+ struct vmxnet3_tx_buf_info *tbi;
+ union Vmxnet3_GenericDesc *gdesc;
+
+ tbi = tq->buf_info + tq->tx_ring.next2comp;
+ gdesc = tq->tx_ring.base + tq->tx_ring.next2comp;
+
+ vmxnet3_unmap_tx_buf(tbi, adapter->pdev);
+ if (tbi->skb) {
+ dev_kfree_skb_any(tbi->skb);
+ tbi->skb = NULL;
+ }
+ vmxnet3_cmd_ring_adv_next2comp(&tq->tx_ring);
+ }
+
+ /* sanity check, verify all buffers are indeed unmapped and freed */
+ for (i = 0; i < tq->tx_ring.size; i++) {
+ BUG_ON(tq->buf_info[i].skb != NULL ||
+ tq->buf_info[i].map_type != VMXNET3_MAP_NONE);
+ }
+
+ tq->tx_ring.gen = VMXNET3_INIT_GEN;
+ tq->tx_ring.next2fill = tq->tx_ring.next2comp = 0;
+
+ tq->comp_ring.gen = VMXNET3_INIT_GEN;
+ tq->comp_ring.next2proc = 0;
+}
+
+
+void
+vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq,
+ struct vmxnet3_adapter *adapter)
+{
+ if (tq->tx_ring.base) {
+ pci_free_consistent(adapter->pdev, tq->tx_ring.size *
+ sizeof(struct Vmxnet3_TxDesc),
+ tq->tx_ring.base, tq->tx_ring.basePA);
+ tq->tx_ring.base = NULL;
+ }
+ if (tq->data_ring.base) {
+ pci_free_consistent(adapter->pdev, tq->data_ring.size *
+ sizeof(struct Vmxnet3_TxDataDesc),
+ tq->data_ring.base, tq->data_ring.basePA);
+ tq->data_ring.base = NULL;
+ }
+ if (tq->comp_ring.base) {
+ pci_free_consistent(adapter->pdev, tq->comp_ring.size *
+ sizeof(struct Vmxnet3_TxCompDesc),
+ tq->comp_ring.base, tq->comp_ring.basePA);
+ tq->comp_ring.base = NULL;
+ }
+ kfree(tq->buf_info);
+ tq->buf_info = NULL;
+}
+
+
+static void
+vmxnet3_tq_init(struct vmxnet3_tx_queue *tq,
+ struct vmxnet3_adapter *adapter)
+{
+ int i;
+
+ /* reset the tx ring contents to 0 and reset the tx ring states */
+ memset(tq->tx_ring.base, 0, tq->tx_ring.size *
+ sizeof(struct Vmxnet3_TxDesc));
+ tq->tx_ring.next2fill = tq->tx_ring.next2comp = 0;
+ tq->tx_ring.gen = VMXNET3_INIT_GEN;
+
+ memset(tq->data_ring.base, 0, tq->data_ring.size *
+ sizeof(struct Vmxnet3_TxDataDesc));
+
+ /* reset the tx comp ring contents to 0 and reset comp ring states */
+ memset(tq->comp_ring.base, 0, tq->comp_ring.size *
+ sizeof(struct Vmxnet3_TxCompDesc));
+ tq->comp_ring.next2proc = 0;
+ tq->comp_ring.gen = VMXNET3_INIT_GEN;
+
+ /* reset the bookkeeping data */
+ memset(tq->buf_info, 0, sizeof(tq->buf_info[0]) * tq->tx_ring.size);
+ for (i = 0; i < tq->tx_ring.size; i++)
+ tq->buf_info[i].map_type = VMXNET3_MAP_NONE;
+
+ /* stats are not reset */
+}
+
+
+static int
+vmxnet3_tq_create(struct vmxnet3_tx_queue *tq,
+ struct vmxnet3_adapter *adapter)
+{
+ BUG_ON(tq->tx_ring.base || tq->data_ring.base ||
+ tq->comp_ring.base || tq->buf_info);
+
+ tq->tx_ring.base = pci_alloc_consistent(adapter->pdev, tq->tx_ring.size
+ * sizeof(struct Vmxnet3_TxDesc),
+ &tq->tx_ring.basePA);
+ if (!tq->tx_ring.base) {
+ printk(KERN_ERR "%s: failed to allocate tx ring\n",
+ adapter->netdev->name);
+ goto err;
+ }
+
+ tq->data_ring.base = pci_alloc_consistent(adapter->pdev,
+ tq->data_ring.size *
+ sizeof(struct Vmxnet3_TxDataDesc),
+ &tq->data_ring.basePA);
+ if (!tq->data_ring.base) {
+ printk(KERN_ERR "%s: failed to allocate data ring\n",
+ adapter->netdev->name);
+ goto err;
+ }
+
+ tq->comp_ring.base = pci_alloc_consistent(adapter->pdev,
+ tq->comp_ring.size *
+ sizeof(struct Vmxnet3_TxCompDesc),
+ &tq->comp_ring.basePA);
+ if (!tq->comp_ring.base) {
+ printk(KERN_ERR "%s: failed to allocate tx comp ring\n",
+ adapter->netdev->name);
+ goto err;
+ }
+
+ tq->buf_info = kcalloc(tq->tx_ring.size, sizeof(tq->buf_info[0]),
+ GFP_KERNEL);
+ if (!tq->buf_info) {
+ printk(KERN_ERR "%s: failed to allocate tx bufinfo\n",
+ adapter->netdev->name);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ vmxnet3_tq_destroy(tq, adapter);
+ return -ENOMEM;
+}
+
+
+/*
+ * starting from ring->next2fill, allocate rx buffers for the given ring
+ * of the rx queue and update the rx desc. stop after @num_to_alloc buffers
+ * are allocated or allocation fails
+ */
+
+static int
+vmxnet3_rq_alloc_rx_buf(struct vmxnet3_rx_queue *rq, u32 ring_idx,
+ int num_to_alloc, struct vmxnet3_adapter *adapter)
+{
+ int num_allocated = 0;
+ struct vmxnet3_rx_buf_info *rbi_base = rq->buf_info[ring_idx];
+ struct vmxnet3_cmd_ring *ring = &rq->rx_ring[ring_idx];
+ u32 val;
+
+ while (num_allocated < num_to_alloc) {
+ struct vmxnet3_rx_buf_info *rbi;
+ union Vmxnet3_GenericDesc *gd;
+
+ rbi = rbi_base + ring->next2fill;
+ gd = ring->base + ring->next2fill;
+
+ if (rbi->buf_type == VMXNET3_RX_BUF_SKB) {
+ if (rbi->skb == NULL) {
+ rbi->skb = dev_alloc_skb(rbi->len +
+ NET_IP_ALIGN);
+ if (unlikely(rbi->skb == NULL)) {
+ rq->stats.rx_buf_alloc_failure++;
+ break;
+ }
+ rbi->skb->dev = adapter->netdev;
+
+ skb_reserve(rbi->skb, NET_IP_ALIGN);
+ rbi->dma_addr = pci_map_single(adapter->pdev,
+ rbi->skb->data, rbi->len,
+ PCI_DMA_FROMDEVICE);
+ } else {
+ /* rx buffer skipped by the device */
+ }
+ val = VMXNET3_RXD_BTYPE_HEAD << VMXNET3_RXD_BTYPE_SHIFT;
+ } else {
+ BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_PAGE ||
+ rbi->len != PAGE_SIZE);
+
+ if (rbi->page == NULL) {
+ rbi->page = alloc_page(GFP_ATOMIC);
+ if (unlikely(rbi->page == NULL)) {
+ rq->stats.rx_buf_alloc_failure++;
+ break;
+ }
+ rbi->dma_addr = pci_map_page(adapter->pdev,
+ rbi->page, 0, PAGE_SIZE,
+ PCI_DMA_FROMDEVICE);
+ } else {
+ /* rx buffers skipped by the device */
+ }
+ val = VMXNET3_RXD_BTYPE_BODY << VMXNET3_RXD_BTYPE_SHIFT;
+ }
+
+ BUG_ON(rbi->dma_addr == 0);
+ gd->rxd.addr = rbi->dma_addr;
+ gd->dword[2] = (ring->gen << VMXNET3_RXD_GEN_SHIFT) | val |
+ rbi->len;
+
+ num_allocated++;
+ vmxnet3_cmd_ring_adv_next2fill(ring);
+ }
+ rq->uncommitted[ring_idx] += num_allocated;
+
+ dev_dbg(&adapter->netdev->dev,
+ "alloc_rx_buf: %d allocated, next2fill %u, next2comp "
+ "%u, uncommited %u\n", num_allocated, ring->next2fill,
+ ring->next2comp, rq->uncommitted[ring_idx]);
+
+ /* so that the device can distinguish a full ring and an empty ring */
+ BUG_ON(num_allocated != 0 && ring->next2fill == ring->next2comp);
+
+ return num_allocated;
+}
+
+
+static void
+vmxnet3_append_frag(struct sk_buff *skb, struct Vmxnet3_RxCompDesc *rcd,
+ struct vmxnet3_rx_buf_info *rbi)
+{
+ struct skb_frag_struct *frag = skb_shinfo(skb)->frags +
+ skb_shinfo(skb)->nr_frags;
+
+ BUG_ON(skb_shinfo(skb)->nr_frags >= MAX_SKB_FRAGS);
+
+ frag->page = rbi->page;
+ frag->page_offset = 0;
+ frag->size = rcd->len;
+ skb->data_len += frag->size;
+ skb_shinfo(skb)->nr_frags++;
+}
+
+
+static void
+vmxnet3_map_pkt(struct sk_buff *skb, struct vmxnet3_tx_ctx *ctx,
+ struct vmxnet3_tx_queue *tq, struct pci_dev *pdev,
+ struct vmxnet3_adapter *adapter)
+{
+ u32 dw2, len;
+ unsigned long buf_offset;
+ int i;
+ union Vmxnet3_GenericDesc *gdesc;
+ struct vmxnet3_tx_buf_info *tbi = NULL;
+
+ BUG_ON(ctx->copy_size > skb_headlen(skb));
+
+ /* use the previous gen bit for the SOP desc */
+ dw2 = (tq->tx_ring.gen ^ 0x1) << VMXNET3_TXD_GEN_SHIFT;
+
+ ctx->sop_txd = tq->tx_ring.base + tq->tx_ring.next2fill;
+ gdesc = ctx->sop_txd; /* both loops below can be skipped */
+
+ /* no need to map the buffer if headers are copied */
+ if (ctx->copy_size) {
+ ctx->sop_txd->txd.addr = tq->data_ring.basePA +
+ tq->tx_ring.next2fill *
+ sizeof(struct Vmxnet3_TxDataDesc);
+ ctx->sop_txd->dword[2] = dw2 | ctx->copy_size;
+ ctx->sop_txd->dword[3] = 0;
+
+ tbi = tq->buf_info + tq->tx_ring.next2fill;
+ tbi->map_type = VMXNET3_MAP_NONE;
+
+ dev_dbg(&adapter->netdev->dev,
+ "txd[%u]: 0x%Lx 0x%x 0x%x\n",
+ tq->tx_ring.next2fill, ctx->sop_txd->txd.addr,
+ ctx->sop_txd->dword[2], ctx->sop_txd->dword[3]);
+ vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+
+ /* use the right gen for non-SOP desc */
+ dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+ }
+
+ /* linear part can use multiple tx desc if it's big */
+ len = skb_headlen(skb) - ctx->copy_size;
+ buf_offset = ctx->copy_size;
+ while (len) {
+ u32 buf_size;
+
+ buf_size = len > VMXNET3_MAX_TX_BUF_SIZE ?
+ VMXNET3_MAX_TX_BUF_SIZE : len;
+
+ tbi = tq->buf_info + tq->tx_ring.next2fill;
+ tbi->map_type = VMXNET3_MAP_SINGLE;
+ tbi->dma_addr = pci_map_single(adapter->pdev,
+ skb->data + buf_offset, buf_size,
+ PCI_DMA_TODEVICE);
+
+ tbi->len = buf_size; /* this automatically convert 2^14 to 0 */
+
+ gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
+ BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
+
+ gdesc->txd.addr = tbi->dma_addr;
+ gdesc->dword[2] = dw2 | buf_size;
+ gdesc->dword[3] = 0;
+
+ dev_dbg(&adapter->netdev->dev,
+ "txd[%u]: 0x%Lx 0x%x 0x%x\n",
+ tq->tx_ring.next2fill, gdesc->txd.addr,
+ gdesc->dword[2], gdesc->dword[3]);
+ vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+ dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+
+ len -= buf_size;
+ buf_offset += buf_size;
+ }
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i];
+
+ tbi = tq->buf_info + tq->tx_ring.next2fill;
+ tbi->map_type = VMXNET3_MAP_PAGE;
+ tbi->dma_addr = pci_map_page(adapter->pdev, frag->page,
+ frag->page_offset, frag->size,
+ PCI_DMA_TODEVICE);
+
+ tbi->len = frag->size;
+
+ gdesc = tq->tx_ring.base + tq->tx_ring.next2fill;
+ BUG_ON(gdesc->txd.gen == tq->tx_ring.gen);
+
+ gdesc->txd.addr = tbi->dma_addr;
+ gdesc->dword[2] = dw2 | frag->size;
+ gdesc->dword[3] = 0;
+
+ dev_dbg(&adapter->netdev->dev,
+ "txd[%u]: 0x%llu %u %u\n",
+ tq->tx_ring.next2fill, gdesc->txd.addr,
+ gdesc->dword[2], gdesc->dword[3]);
+ vmxnet3_cmd_ring_adv_next2fill(&tq->tx_ring);
+ dw2 = tq->tx_ring.gen << VMXNET3_TXD_GEN_SHIFT;
+ }
+
+ ctx->eop_txd = gdesc;
+
+ /* set the last buf_info for the pkt */
+ tbi->skb = skb;
+ tbi->sop_idx = ctx->sop_txd - tq->tx_ring.base;
+}
+
+
+/*
+ * parse and copy relevant protocol headers:
+ * For a tso pkt, relevant headers are L2/3/4 including options
+ * For a pkt requesting csum offloading, they are L2/3 and may include L4
+ * if it's a TCP/UDP pkt
+ *
+ * Returns:
+ * -1: error happens during parsing
+ * 0: protocol headers parsed, but too big to be copied
+ * 1: protocol headers parsed and copied
+ *
+ * Other effects:
+ * 1. related *ctx fields are updated.
+ * 2. ctx->copy_size is # of bytes copied
+ * 3. the portion copied is guaranteed to be in the linear part
+ *
+ */
+static int
+vmxnet3_parse_and_copy_hdr(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
+ struct vmxnet3_tx_ctx *ctx,
+ struct vmxnet3_adapter *adapter)
+{
+ struct Vmxnet3_TxDataDesc *tdd;
+
+ if (ctx->mss) {
+ ctx->eth_ip_hdr_size = skb_transport_offset(skb);
+ ctx->l4_hdr_size = ((struct tcphdr *)
+ skb_transport_header(skb))->doff * 4;
+ ctx->copy_size = ctx->eth_ip_hdr_size + ctx->l4_hdr_size;
+ } else {
+ unsigned int pull_size;
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ ctx->eth_ip_hdr_size = skb_transport_offset(skb);
+
+ if (ctx->ipv4) {
+ struct iphdr *iph = (struct iphdr *)
+ skb_network_header(skb);
+ if (iph->protocol == IPPROTO_TCP) {
+ pull_size = ctx->eth_ip_hdr_size +
+ sizeof(struct tcphdr);
+
+ if (unlikely(!pskb_may_pull(skb,
+ pull_size))) {
+ goto err;
+ }
+ ctx->l4_hdr_size = ((struct tcphdr *)
+ skb_transport_header(skb))->doff * 4;
+ } else if (iph->protocol == IPPROTO_UDP) {
+ ctx->l4_hdr_size =
+ sizeof(struct udphdr);
+ } else {
+ ctx->l4_hdr_size = 0;
+ }
+ } else {
+ /* for simplicity, don't copy L4 headers */
+ ctx->l4_hdr_size = 0;
+ }
+ ctx->copy_size = ctx->eth_ip_hdr_size +
+ ctx->l4_hdr_size;
+ } else {
+ ctx->eth_ip_hdr_size = 0;
+ ctx->l4_hdr_size = 0;
+ /* copy as much as allowed */
+ ctx->copy_size = min((unsigned int)VMXNET3_HDR_COPY_SIZE
+ , skb_headlen(skb));
+ }
+
+ /* make sure headers are accessible directly */
+ if (unlikely(!pskb_may_pull(skb, ctx->copy_size)))
+ goto err;
+ }
+
+ if (unlikely(ctx->copy_size > VMXNET3_HDR_COPY_SIZE)) {
+ tq->stats.oversized_hdr++;
+ ctx->copy_size = 0;
+ return 0;
+ }
+
+ tdd = tq->data_ring.base + tq->tx_ring.next2fill;
+
+ memcpy(tdd->data, skb->data, ctx->copy_size);
+ dev_dbg(&adapter->netdev->dev,
+ "copy %u bytes to dataRing[%u]\n",
+ ctx->copy_size, tq->tx_ring.next2fill);
+ return 1;
+
+err:
+ return -1;
+}
+
+
+static void
+vmxnet3_prepare_tso(struct sk_buff *skb,
+ struct vmxnet3_tx_ctx *ctx)
+{
+ struct tcphdr *tcph = (struct tcphdr *)skb_transport_header(skb);
+ if (ctx->ipv4) {
+ struct iphdr *iph = (struct iphdr *)skb_network_header(skb);
+ iph->check = 0;
+ tcph->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, 0,
+ IPPROTO_TCP, 0);
+ } else {
+ struct ipv6hdr *iph = (struct ipv6hdr *)skb_network_header(skb);
+ tcph->check = ~csum_ipv6_magic(&iph->saddr, &iph->daddr, 0,
+ IPPROTO_TCP, 0);
+ }
+}
+
+
+/*
+ * Transmits a pkt thru a given tq
+ * Returns:
+ * NETDEV_TX_OK: descriptors are setup successfully
+ * NETDEV_TX_OK: error occured, the pkt is dropped
+ * NETDEV_TX_BUSY: tx ring is full, queue is stopped
+ *
+ * Side-effects:
+ * 1. tx ring may be changed
+ * 2. tq stats may be updated accordingly
+ * 3. shared->txNumDeferred may be updated
+ */
+
+static int
+vmxnet3_tq_xmit(struct sk_buff *skb, struct vmxnet3_tx_queue *tq,
+ struct vmxnet3_adapter *adapter, struct net_device *netdev)
+{
+ int ret;
+ u32 count;
+ unsigned long flags;
+ struct vmxnet3_tx_ctx ctx;
+ union Vmxnet3_GenericDesc *gdesc;
+
+ /* conservatively estimate # of descriptors to use */
+ count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) +
+ skb_shinfo(skb)->nr_frags + 1;
+
+ ctx.ipv4 = (skb->protocol == __constant_ntohs(ETH_P_IP));
+
+ ctx.mss = skb_shinfo(skb)->gso_size;
+ if (ctx.mss) {
+ if (skb_header_cloned(skb)) {
+ if (unlikely(pskb_expand_head(skb, 0, 0,
+ GFP_ATOMIC) != 0)) {
+ tq->stats.drop_tso++;
+ goto drop_pkt;
+ }
+ tq->stats.copy_skb_header++;
+ }
+ vmxnet3_prepare_tso(skb, &ctx);
+ } else {
+ if (unlikely(count > VMXNET3_MAX_TXD_PER_PKT)) {
+
+ /* non-tso pkts must not use more than
+ * VMXNET3_MAX_TXD_PER_PKT entries
+ */
+ if (skb_linearize(skb) != 0) {
+ tq->stats.drop_too_many_frags++;
+ goto drop_pkt;
+ }
+ tq->stats.linearized++;
+
+ /* recalculate the # of descriptors to use */
+ count = VMXNET3_TXD_NEEDED(skb_headlen(skb)) + 1;
+ }
+ }
+
+ ret = vmxnet3_parse_and_copy_hdr(skb, tq, &ctx, adapter);
+ if (ret >= 0) {
+ BUG_ON(ret <= 0 && ctx.copy_size != 0);
+ /* hdrs parsed, check against other limits */
+ if (ctx.mss) {
+ if (unlikely(ctx.eth_ip_hdr_size + ctx.l4_hdr_size >
+ VMXNET3_MAX_TX_BUF_SIZE)) {
+ goto hdr_too_big;
+ }
+ } else {
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ if (unlikely(ctx.eth_ip_hdr_size +
+ skb->csum_offset >
+ VMXNET3_MAX_CSUM_OFFSET)) {
+ goto hdr_too_big;
+ }
+ }
+ }
+ } else {
+ tq->stats.drop_hdr_inspect_err++;
+ goto drop_pkt;
+ }
+
+ spin_lock_irqsave(&tq->tx_lock, flags);
+
+ if (count > vmxnet3_cmd_ring_desc_avail(&tq->tx_ring)) {
+ tq->stats.tx_ring_full++;
+ dev_dbg(&adapter->netdev->dev,
+ "tx queue stopped on %s, next2comp %u"
+ " next2fill %u\n", adapter->netdev->name,
+ tq->tx_ring.next2comp, tq->tx_ring.next2fill);
+
+ vmxnet3_tq_stop(tq, adapter);
+ spin_unlock_irqrestore(&tq->tx_lock, flags);
+ return NETDEV_TX_BUSY;
+ }
+
+ /* fill tx descs related to addr & len */
+ vmxnet3_map_pkt(skb, &ctx, tq, adapter->pdev, adapter);
+
+ /* setup the EOP desc */
+ ctx.eop_txd->dword[3] = VMXNET3_TXD_CQ | VMXNET3_TXD_EOP;
+
+ /* setup the SOP desc */
+ gdesc = ctx.sop_txd;
+ if (ctx.mss) {
+ gdesc->txd.hlen = ctx.eth_ip_hdr_size + ctx.l4_hdr_size;
+ gdesc->txd.om = VMXNET3_OM_TSO;
+ gdesc->txd.msscof = ctx.mss;
+ tq->shared->txNumDeferred += (skb->len - gdesc->txd.hlen +
+ ctx.mss - 1) / ctx.mss;
+ } else {
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ gdesc->txd.hlen = ctx.eth_ip_hdr_size;
+ gdesc->txd.om = VMXNET3_OM_CSUM;
+ gdesc->txd.msscof = ctx.eth_ip_hdr_size +
+ skb->csum_offset;
+ } else {
+ gdesc->txd.om = 0;
+ gdesc->txd.msscof = 0;
+ }
+ tq->shared->txNumDeferred++;
+ }
+
+ if (vlan_tx_tag_present(skb)) {
+ gdesc->txd.ti = 1;
+ gdesc->txd.tci = vlan_tx_tag_get(skb);
+ }
+
+ wmb();
+
+ /* finally flips the GEN bit of the SOP desc */
+ gdesc->dword[2] ^= VMXNET3_TXD_GEN;
+ dev_dbg(&adapter->netdev->dev,
+ "txd[%u]: SOP 0x%Lx 0x%x 0x%x\n",
+ (u32)((union Vmxnet3_GenericDesc *)ctx.sop_txd -
+ tq->tx_ring.base), gdesc->txd.addr, gdesc->dword[2],
+ gdesc->dword[3]);
+
+ spin_unlock_irqrestore(&tq->tx_lock, flags);
+
+ if (tq->shared->txNumDeferred >= tq->shared->txThreshold) {
+ tq->shared->txNumDeferred = 0;
+ VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_TXPROD,
+ tq->tx_ring.next2fill);
+ }
+ netdev->trans_start = jiffies;
+
+ return NETDEV_TX_OK;
+
+hdr_too_big:
+ tq->stats.drop_oversized_hdr++;
+drop_pkt:
+ tq->stats.drop_total++;
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+
+static netdev_tx_t
+vmxnet3_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ struct vmxnet3_tx_queue *tq = &adapter->tx_queue;
+
+ return vmxnet3_tq_xmit(skb, tq, adapter, netdev);
+}
+
+
+static void
+vmxnet3_rx_csum(struct vmxnet3_adapter *adapter,
+ struct sk_buff *skb,
+ union Vmxnet3_GenericDesc *gdesc)
+{
+ if (!gdesc->rcd.cnc && adapter->rxcsum) {
+ /* typical case: TCP/UDP over IP and both csums are correct */
+ if ((gdesc->dword[3] & VMXNET3_RCD_CSUM_OK) ==
+ VMXNET3_RCD_CSUM_OK) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ BUG_ON(!(gdesc->rcd.tcp || gdesc->rcd.udp));
+ BUG_ON(!(gdesc->rcd.v4 || gdesc->rcd.v6));
+ BUG_ON(gdesc->rcd.frg);
+ } else {
+ if (gdesc->rcd.csum) {
+ skb->csum = htons(gdesc->rcd.csum);
+ skb->ip_summed = CHECKSUM_PARTIAL;
+ } else {
+ skb->ip_summed = CHECKSUM_NONE;
+ }
+ }
+ } else {
+ skb->ip_summed = CHECKSUM_NONE;
+ }
+}
+
+
+static void
+vmxnet3_rx_error(struct vmxnet3_rx_queue *rq, struct Vmxnet3_RxCompDesc *rcd,
+ struct vmxnet3_rx_ctx *ctx, struct vmxnet3_adapter *adapter)
+{
+ rq->stats.drop_err++;
+ if (!rcd->fcs)
+ rq->stats.drop_fcs++;
+
+ rq->stats.drop_total++;
+
+ /*
+ * We do not unmap and chain the rx buffer to the skb.
+ * We basically pretend this buffer is not used and will be recycled
+ * by vmxnet3_rq_alloc_rx_buf()
+ */
+
+ /*
+ * ctx->skb may be NULL if this is the first and the only one
+ * desc for the pkt
+ */
+ if (ctx->skb)
+ dev_kfree_skb_irq(ctx->skb);
+
+ ctx->skb = NULL;
+}
+
+
+static int
+vmxnet3_rq_rx_complete(struct vmxnet3_rx_queue *rq,
+ struct vmxnet3_adapter *adapter, int quota)
+{
+ static u32 rxprod_reg[2] = {VMXNET3_REG_RXPROD, VMXNET3_REG_RXPROD2};
+ u32 num_rxd = 0;
+ struct Vmxnet3_RxCompDesc *rcd;
+ struct vmxnet3_rx_ctx *ctx = &rq->rx_ctx;
+
+ rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd;
+ while (rcd->gen == rq->comp_ring.gen) {
+ struct vmxnet3_rx_buf_info *rbi;
+ struct sk_buff *skb;
+ int num_to_alloc;
+ struct Vmxnet3_RxDesc *rxd;
+ u32 idx, ring_idx;
+
+ if (num_rxd >= quota) {
+ /* we may stop even before we see the EOP desc of
+ * the current pkt
+ */
+ break;
+ }
+ num_rxd++;
+
+ idx = rcd->rxdIdx;
+ ring_idx = rcd->rqID == rq->qid ? 0 : 1;
+
+ rxd = &rq->rx_ring[ring_idx].base[idx].rxd;
+ rbi = rq->buf_info[ring_idx] + idx;
+
+ BUG_ON(rxd->addr != rbi->dma_addr || rxd->len != rbi->len);
+
+ if (unlikely(rcd->eop && rcd->err)) {
+ vmxnet3_rx_error(rq, rcd, ctx, adapter);
+ goto rcd_done;
+ }
+
+ if (rcd->sop) { /* first buf of the pkt */
+ BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_HEAD ||
+ rcd->rqID != rq->qid);
+
+ BUG_ON(rbi->buf_type != VMXNET3_RX_BUF_SKB);
+ BUG_ON(ctx->skb != NULL || rbi->skb == NULL);
+
+ if (unlikely(rcd->len == 0)) {
+ /* Pretend the rx buffer is skipped. */
+ BUG_ON(!(rcd->sop && rcd->eop));
+ dev_dbg(&adapter->netdev->dev,
+ "rxRing[%u][%u] 0 length\n",
+ ring_idx, idx);
+ goto rcd_done;
+ }
+
+ ctx->skb = rbi->skb;
+ rbi->skb = NULL;
+
+ pci_unmap_single(adapter->pdev, rbi->dma_addr, rbi->len,
+ PCI_DMA_FROMDEVICE);
+
+ skb_put(ctx->skb, rcd->len);
+ } else {
+ BUG_ON(ctx->skb == NULL);
+ /* non SOP buffer must be type 1 in most cases */
+ if (rbi->buf_type == VMXNET3_RX_BUF_PAGE) {
+ BUG_ON(rxd->btype != VMXNET3_RXD_BTYPE_BODY);
+
+ if (rcd->len) {
+ pci_unmap_page(adapter->pdev,
+ rbi->dma_addr, rbi->len,
+ PCI_DMA_FROMDEVICE);
+
+ vmxnet3_append_frag(ctx->skb, rcd, rbi);
+ rbi->page = NULL;
+ }
+ } else {
+ /*
+ * The only time a non-SOP buffer is type 0 is
+ * when it's EOP and error flag is raised, which
+ * has already been handled.
+ */
+ BUG_ON(true);
+ }
+ }
+
+ skb = ctx->skb;
+ if (rcd->eop) {
+ skb->len += skb->data_len;
+ skb->truesize += skb->data_len;
+
+ vmxnet3_rx_csum(adapter, skb,
+ (union Vmxnet3_GenericDesc *)rcd);
+ skb->protocol = eth_type_trans(skb, adapter->netdev);
+
+ if (unlikely(adapter->vlan_grp && rcd->ts)) {
+ vlan_hwaccel_receive_skb(skb,
+ adapter->vlan_grp, rcd->tci);
+ } else {
+ netif_receive_skb(skb);
+ }
+
+ adapter->netdev->last_rx = jiffies;
+ ctx->skb = NULL;
+ }
+
+rcd_done:
+ /* device may skip some rx descs */
+ rq->rx_ring[ring_idx].next2comp = idx;
+ VMXNET3_INC_RING_IDX_ONLY(rq->rx_ring[ring_idx].next2comp,
+ rq->rx_ring[ring_idx].size);
+
+ /* refill rx buffers frequently to avoid starving the h/w */
+ num_to_alloc = vmxnet3_cmd_ring_desc_avail(rq->rx_ring +
+ ring_idx);
+ if (unlikely(num_to_alloc > VMXNET3_RX_ALLOC_THRESHOLD(rq,
+ ring_idx, adapter))) {
+ vmxnet3_rq_alloc_rx_buf(rq, ring_idx, num_to_alloc,
+ adapter);
+
+ /* if needed, update the register */
+ if (unlikely(rq->shared->updateRxProd)) {
+ VMXNET3_WRITE_BAR0_REG(adapter,
+ rxprod_reg[ring_idx] + rq->qid * 8,
+ rq->rx_ring[ring_idx].next2fill);
+ rq->uncommitted[ring_idx] = 0;
+ }
+ }
+
+ vmxnet3_comp_ring_adv_next2proc(&rq->comp_ring);
+ rcd = &rq->comp_ring.base[rq->comp_ring.next2proc].rcd;
+ }
+
+ return num_rxd;
+}
+
+
+static void
+vmxnet3_rq_cleanup(struct vmxnet3_rx_queue *rq,
+ struct vmxnet3_adapter *adapter)
+{
+ u32 i, ring_idx;
+ struct Vmxnet3_RxDesc *rxd;
+
+ for (ring_idx = 0; ring_idx < 2; ring_idx++) {
+ for (i = 0; i < rq->rx_ring[ring_idx].size; i++) {
+ rxd = &rq->rx_ring[ring_idx].base[i].rxd;
+
+ if (rxd->btype == VMXNET3_RXD_BTYPE_HEAD &&
+ rq->buf_info[ring_idx][i].skb) {
+ pci_unmap_single(adapter->pdev, rxd->addr,
+ rxd->len, PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(rq->buf_info[ring_idx][i].skb);
+ rq->buf_info[ring_idx][i].skb = NULL;
+ } else if (rxd->btype == VMXNET3_RXD_BTYPE_BODY &&
+ rq->buf_info[ring_idx][i].page) {
+ pci_unmap_page(adapter->pdev, rxd->addr,
+ rxd->len, PCI_DMA_FROMDEVICE);
+ put_page(rq->buf_info[ring_idx][i].page);
+ rq->buf_info[ring_idx][i].page = NULL;
+ }
+ }
+
+ rq->rx_ring[ring_idx].gen = VMXNET3_INIT_GEN;
+ rq->rx_ring[ring_idx].next2fill =
+ rq->rx_ring[ring_idx].next2comp = 0;
+ rq->uncommitted[ring_idx] = 0;
+ }
+
+ rq->comp_ring.gen = VMXNET3_INIT_GEN;
+ rq->comp_ring.next2proc = 0;
+}
+
+
+void vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq,
+ struct vmxnet3_adapter *adapter)
+{
+ int i;
+ int j;
+
+ /* all rx buffers must have already been freed */
+ for (i = 0; i < 2; i++) {
+ if (rq->buf_info[i]) {
+ for (j = 0; j < rq->rx_ring[i].size; j++)
+ BUG_ON(rq->buf_info[i][j].page != NULL);
+ }
+ }
+
+
+ kfree(rq->buf_info[0]);
+
+ for (i = 0; i < 2; i++) {
+ if (rq->rx_ring[i].base) {
+ pci_free_consistent(adapter->pdev, rq->rx_ring[i].size
+ * sizeof(struct Vmxnet3_RxDesc),
+ rq->rx_ring[i].base,
+ rq->rx_ring[i].basePA);
+ rq->rx_ring[i].base = NULL;
+ }
+ rq->buf_info[i] = NULL;
+ }
+
+ if (rq->comp_ring.base) {
+ pci_free_consistent(adapter->pdev, rq->comp_ring.size *
+ sizeof(struct Vmxnet3_RxCompDesc),
+ rq->comp_ring.base, rq->comp_ring.basePA);
+ rq->comp_ring.base = NULL;
+ }
+}
+
+
+static int
+vmxnet3_rq_init(struct vmxnet3_rx_queue *rq,
+ struct vmxnet3_adapter *adapter)
+{
+ int i;
+
+ /* initialize buf_info */
+ for (i = 0; i < rq->rx_ring[0].size; i++) {
+
+ /* 1st buf for a pkt is skbuff */
+ if (i % adapter->rx_buf_per_pkt == 0) {
+ rq->buf_info[0][i].buf_type = VMXNET3_RX_BUF_SKB;
+ rq->buf_info[0][i].len = adapter->skb_buf_size;
+ } else { /* subsequent bufs for a pkt is frag */
+ rq->buf_info[0][i].buf_type = VMXNET3_RX_BUF_PAGE;
+ rq->buf_info[0][i].len = PAGE_SIZE;
+ }
+ }
+ for (i = 0; i < rq->rx_ring[1].size; i++) {
+ rq->buf_info[1][i].buf_type = VMXNET3_RX_BUF_PAGE;
+ rq->buf_info[1][i].len = PAGE_SIZE;
+ }
+
+ /* reset internal state and allocate buffers for both rings */
+ for (i = 0; i < 2; i++) {
+ rq->rx_ring[i].next2fill = rq->rx_ring[i].next2comp = 0;
+ rq->uncommitted[i] = 0;
+
+ memset(rq->rx_ring[i].base, 0, rq->rx_ring[i].size *
+ sizeof(struct Vmxnet3_RxDesc));
+ rq->rx_ring[i].gen = VMXNET3_INIT_GEN;
+ }
+ if (vmxnet3_rq_alloc_rx_buf(rq, 0, rq->rx_ring[0].size - 1,
+ adapter) == 0) {
+ /* at least has 1 rx buffer for the 1st ring */
+ return -ENOMEM;
+ }
+ vmxnet3_rq_alloc_rx_buf(rq, 1, rq->rx_ring[1].size - 1, adapter);
+
+ /* reset the comp ring */
+ rq->comp_ring.next2proc = 0;
+ memset(rq->comp_ring.base, 0, rq->comp_ring.size *
+ sizeof(struct Vmxnet3_RxCompDesc));
+ rq->comp_ring.gen = VMXNET3_INIT_GEN;
+
+ /* reset rxctx */
+ rq->rx_ctx.skb = NULL;
+
+ /* stats are not reset */
+ return 0;
+}
+
+
+static int
+vmxnet3_rq_create(struct vmxnet3_rx_queue *rq, struct vmxnet3_adapter *adapter)
+{
+ int i;
+ size_t sz;
+ struct vmxnet3_rx_buf_info *bi;
+
+ for (i = 0; i < 2; i++) {
+
+ sz = rq->rx_ring[i].size * sizeof(struct Vmxnet3_RxDesc);
+ rq->rx_ring[i].base = pci_alloc_consistent(adapter->pdev, sz,
+ &rq->rx_ring[i].basePA);
+ if (!rq->rx_ring[i].base) {
+ printk(KERN_ERR "%s: failed to allocate rx ring %d\n",
+ adapter->netdev->name, i);
+ goto err;
+ }
+ }
+
+ sz = rq->comp_ring.size * sizeof(struct Vmxnet3_RxCompDesc);
+ rq->comp_ring.base = pci_alloc_consistent(adapter->pdev, sz,
+ &rq->comp_ring.basePA);
+ if (!rq->comp_ring.base) {
+ printk(KERN_ERR "%s: failed to allocate rx comp ring\n",
+ adapter->netdev->name);
+ goto err;
+ }
+
+ sz = sizeof(struct vmxnet3_rx_buf_info) * (rq->rx_ring[0].size +
+ rq->rx_ring[1].size);
+ bi = kmalloc(sz, GFP_KERNEL);
+ if (!bi) {
+ printk(KERN_ERR "%s: failed to allocate rx bufinfo\n",
+ adapter->netdev->name);
+ goto err;
+ }
+ memset(bi, 0, sz);
+ rq->buf_info[0] = bi;
+ rq->buf_info[1] = bi + rq->rx_ring[0].size;
+
+ return 0;
+
+err:
+ vmxnet3_rq_destroy(rq, adapter);
+ return -ENOMEM;
+}
+
+
+static int
+vmxnet3_do_poll(struct vmxnet3_adapter *adapter, int budget)
+{
+ if (unlikely(adapter->shared->ecr))
+ vmxnet3_process_events(adapter);
+
+ vmxnet3_tq_tx_complete(&adapter->tx_queue, adapter);
+ return vmxnet3_rq_rx_complete(&adapter->rx_queue, adapter, budget);
+}
+
+
+static int
+vmxnet3_poll(struct napi_struct *napi, int budget)
+{
+ struct vmxnet3_adapter *adapter = container_of(napi,
+ struct vmxnet3_adapter, napi);
+ int rxd_done;
+
+ rxd_done = vmxnet3_do_poll(adapter, budget);
+
+ if (rxd_done < budget) {
+ napi_complete(napi);
+ vmxnet3_enable_intr(adapter, 0);
+ }
+ return rxd_done;
+}
+
+
+/* Interrupt handler for vmxnet3 */
+static irqreturn_t
+vmxnet3_intr(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct vmxnet3_adapter *adapter = netdev_priv(dev);
+
+ if (unlikely(adapter->intr.type == VMXNET3_IT_INTX)) {
+ u32 icr = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_ICR);
+ if (unlikely(icr == 0))
+ /* not ours */
+ return IRQ_NONE;
+ }
+
+
+ /* disable intr if needed */
+ if (adapter->intr.mask_mode == VMXNET3_IMM_ACTIVE)
+ vmxnet3_disable_intr(adapter, 0);
+
+ napi_schedule(&adapter->napi);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+
+/* netpoll callback. */
+static void
+vmxnet3_netpoll(struct net_device *netdev)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ int irq;
+
+#ifdef CONFIG_PCI_MSI
+ if (adapter->intr.type == VMXNET3_IT_MSIX)
+ irq = adapter->intr.msix_entries[0].vector;
+ else
+#endif
+ irq = adapter->pdev->irq;
+
+ disable_irq(irq);
+ vmxnet3_intr(irq, netdev);
+ enable_irq(irq);
+}
+#endif
+
+static int
+vmxnet3_request_irqs(struct vmxnet3_adapter *adapter)
+{
+ int err;
+
+#ifdef CONFIG_PCI_MSI
+ if (adapter->intr.type == VMXNET3_IT_MSIX) {
+ /* we only use 1 MSI-X vector */
+ err = request_irq(adapter->intr.msix_entries[0].vector,
+ vmxnet3_intr, 0, adapter->netdev->name,
+ adapter->netdev);
+ } else
+#endif
+ if (adapter->intr.type == VMXNET3_IT_MSI) {
+ err = request_irq(adapter->pdev->irq, vmxnet3_intr, 0,
+ adapter->netdev->name, adapter->netdev);
+ } else {
+ err = request_irq(adapter->pdev->irq, vmxnet3_intr,
+ IRQF_SHARED, adapter->netdev->name,
+ adapter->netdev);
+ }
+
+ if (err)
+ printk(KERN_ERR "Failed to request irq %s (intr type:%d), error"
+ ":%d\n", adapter->netdev->name, adapter->intr.type, err);
+
+
+ if (!err) {
+ int i;
+ /* init our intr settings */
+ for (i = 0; i < adapter->intr.num_intrs; i++)
+ adapter->intr.mod_levels[i] = UPT1_IML_ADAPTIVE;
+
+ /* next setup intr index for all intr sources */
+ adapter->tx_queue.comp_ring.intr_idx = 0;
+ adapter->rx_queue.comp_ring.intr_idx = 0;
+ adapter->intr.event_intr_idx = 0;
+
+ printk(KERN_INFO "%s: intr type %u, mode %u, %u vectors "
+ "allocated\n", adapter->netdev->name, adapter->intr.type,
+ adapter->intr.mask_mode, adapter->intr.num_intrs);
+ }
+
+ return err;
+}
+
+
+static void
+vmxnet3_free_irqs(struct vmxnet3_adapter *adapter)
+{
+ BUG_ON(adapter->intr.type == VMXNET3_IT_AUTO ||
+ adapter->intr.num_intrs <= 0);
+
+ switch (adapter->intr.type) {
+#ifdef CONFIG_PCI_MSI
+ case VMXNET3_IT_MSIX:
+ {
+ int i;
+
+ for (i = 0; i < adapter->intr.num_intrs; i++)
+ free_irq(adapter->intr.msix_entries[i].vector,
+ adapter->netdev);
+ break;
+ }
+#endif
+ case VMXNET3_IT_MSI:
+ free_irq(adapter->pdev->irq, adapter->netdev);
+ break;
+ case VMXNET3_IT_INTX:
+ free_irq(adapter->pdev->irq, adapter->netdev);
+ break;
+ default:
+ BUG_ON(true);
+ }
+}
+
+
+static void
+vmxnet3_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ struct Vmxnet3_DriverShared *shared = adapter->shared;
+ u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+
+ if (grp) {
+ /* add vlan rx stripping. */
+ if (adapter->netdev->features & NETIF_F_HW_VLAN_RX) {
+ int i;
+ struct Vmxnet3_DSDevRead *devRead = &shared->devRead;
+ adapter->vlan_grp = grp;
+
+ /* update FEATURES to device */
+ devRead->misc.uptFeatures |= UPT1_F_RXVLAN;
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_FEATURE);
+ /*
+ * Clear entire vfTable; then enable untagged pkts.
+ * Note: setting one entry in vfTable to non-zero turns
+ * on VLAN rx filtering.
+ */
+ for (i = 0; i < VMXNET3_VFT_SIZE; i++)
+ vfTable[i] = 0;
+
+ VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0);
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+ } else {
+ printk(KERN_ERR "%s: vlan_rx_register when device has "
+ "no NETIF_F_HW_VLAN_RX\n", netdev->name);
+ }
+ } else {
+ /* remove vlan rx stripping. */
+ struct Vmxnet3_DSDevRead *devRead = &shared->devRead;
+ adapter->vlan_grp = NULL;
+
+ if (devRead->misc.uptFeatures & UPT1_F_RXVLAN) {
+ int i;
+
+ for (i = 0; i < VMXNET3_VFT_SIZE; i++) {
+ /* clear entire vfTable; this also disables
+ * VLAN rx filtering
+ */
+ vfTable[i] = 0;
+ }
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+
+ /* update FEATURES to device */
+ devRead->misc.uptFeatures &= ~UPT1_F_RXVLAN;
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_FEATURE);
+ }
+ }
+}
+
+
+static void
+vmxnet3_restore_vlan(struct vmxnet3_adapter *adapter)
+{
+ if (adapter->vlan_grp) {
+ u16 vid;
+ u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+ bool activeVlan = false;
+
+ for (vid = 0; vid < VLAN_GROUP_ARRAY_LEN; vid++) {
+ if (vlan_group_get_device(adapter->vlan_grp, vid)) {
+ VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
+ activeVlan = true;
+ }
+ }
+ if (activeVlan) {
+ /* continue to allow untagged pkts */
+ VMXNET3_SET_VFTABLE_ENTRY(vfTable, 0);
+ }
+ }
+}
+
+
+static void
+vmxnet3_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+
+ VMXNET3_SET_VFTABLE_ENTRY(vfTable, vid);
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+}
+
+
+static void
+vmxnet3_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ u32 *vfTable = adapter->shared->devRead.rxFilterConf.vfTable;
+
+ VMXNET3_CLEAR_VFTABLE_ENTRY(vfTable, vid);
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_VLAN_FILTERS);
+}
+
+
+static u8 *
+vmxnet3_copy_mc(struct net_device *netdev)
+{
+ u8 *buf = NULL;
+ u32 sz = netdev->mc_count * ETH_ALEN;
+
+ /* struct Vmxnet3_RxFilterConf.mfTableLen is u16. */
+ if (sz <= 0xffff) {
+ /* We may be called with BH disabled */
+ buf = kmalloc(sz, GFP_ATOMIC);
+ if (buf) {
+ int i;
+ struct dev_mc_list *mc = netdev->mc_list;
+
+ for (i = 0; i < netdev->mc_count; i++) {
+ BUG_ON(!mc);
+ memcpy(buf + i * ETH_ALEN, mc->dmi_addr,
+ ETH_ALEN);
+ mc = mc->next;
+ }
+ }
+ }
+ return buf;
+}
+
+
+static void
+vmxnet3_set_mc(struct net_device *netdev)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ struct Vmxnet3_RxFilterConf *rxConf =
+ &adapter->shared->devRead.rxFilterConf;
+ u8 *new_table = NULL;
+ u32 new_mode = VMXNET3_RXM_UCAST;
+
+ if (netdev->flags & IFF_PROMISC)
+ new_mode |= VMXNET3_RXM_PROMISC;
+
+ if (netdev->flags & IFF_BROADCAST)
+ new_mode |= VMXNET3_RXM_BCAST;
+
+ if (netdev->flags & IFF_ALLMULTI)
+ new_mode |= VMXNET3_RXM_ALL_MULTI;
+ else
+ if (netdev->mc_count > 0) {
+ new_table = vmxnet3_copy_mc(netdev);
+ if (new_table) {
+ new_mode |= VMXNET3_RXM_MCAST;
+ rxConf->mfTableLen = netdev->mc_count *
+ ETH_ALEN;
+ rxConf->mfTablePA = virt_to_phys(new_table);
+ } else {
+ printk(KERN_INFO "%s: failed to copy mcast list"
+ ", setting ALL_MULTI\n", netdev->name);
+ new_mode |= VMXNET3_RXM_ALL_MULTI;
+ }
+ }
+
+
+ if (!(new_mode & VMXNET3_RXM_MCAST)) {
+ rxConf->mfTableLen = 0;
+ rxConf->mfTablePA = 0;
+ }
+
+ if (new_mode != rxConf->rxMode) {
+ rxConf->rxMode = new_mode;
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_RX_MODE);
+ }
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_MAC_FILTERS);
+
+ kfree(new_table);
+}
+
+
+/*
+ * Set up driver_shared based on settings in adapter.
+ */
+
+static void
+vmxnet3_setup_driver_shared(struct vmxnet3_adapter *adapter)
+{
+ struct Vmxnet3_DriverShared *shared = adapter->shared;
+ struct Vmxnet3_DSDevRead *devRead = &shared->devRead;
+ struct Vmxnet3_TxQueueConf *tqc;
+ struct Vmxnet3_RxQueueConf *rqc;
+ int i;
+
+ memset(shared, 0, sizeof(*shared));
+
+ /* driver settings */
+ shared->magic = VMXNET3_REV1_MAGIC;
+ devRead->misc.driverInfo.version = VMXNET3_DRIVER_VERSION_NUM;
+ devRead->misc.driverInfo.gos.gosBits = (sizeof(void *) == 4 ?
+ VMXNET3_GOS_BITS_32 : VMXNET3_GOS_BITS_64);
+ devRead->misc.driverInfo.gos.gosType = VMXNET3_GOS_TYPE_LINUX;
+ devRead->misc.driverInfo.vmxnet3RevSpt = 1;
+ devRead->misc.driverInfo.uptVerSpt = 1;
+
+ devRead->misc.ddPA = virt_to_phys(adapter);
+ devRead->misc.ddLen = sizeof(struct vmxnet3_adapter);
+
+ /* set up feature flags */
+ if (adapter->rxcsum)
+ devRead->misc.uptFeatures |= UPT1_F_RXCSUM;
+
+ if (adapter->lro) {
+ devRead->misc.uptFeatures |= UPT1_F_LRO;
+ devRead->misc.maxNumRxSG = 1 + MAX_SKB_FRAGS;
+ }
+ if ((adapter->netdev->features & NETIF_F_HW_VLAN_RX)
+ && adapter->vlan_grp) {
+ devRead->misc.uptFeatures |= UPT1_F_RXVLAN;
+ }
+
+ devRead->misc.mtu = adapter->netdev->mtu;
+ devRead->misc.queueDescPA = adapter->queue_desc_pa;
+ devRead->misc.queueDescLen = sizeof(struct Vmxnet3_TxQueueDesc) +
+ sizeof(struct Vmxnet3_RxQueueDesc);
+
+ /* tx queue settings */
+ BUG_ON(adapter->tx_queue.tx_ring.base == NULL);
+
+ devRead->misc.numTxQueues = 1;
+ tqc = &adapter->tqd_start->conf;
+ tqc->txRingBasePA = adapter->tx_queue.tx_ring.basePA;
+ tqc->dataRingBasePA = adapter->tx_queue.data_ring.basePA;
+ tqc->compRingBasePA = adapter->tx_queue.comp_ring.basePA;
+ tqc->ddPA = virt_to_phys(adapter->tx_queue.buf_info);
+ tqc->txRingSize = adapter->tx_queue.tx_ring.size;
+ tqc->dataRingSize = adapter->tx_queue.data_ring.size;
+ tqc->compRingSize = adapter->tx_queue.comp_ring.size;
+ tqc->ddLen = sizeof(struct vmxnet3_tx_buf_info) *
+ tqc->txRingSize;
+ tqc->intrIdx = adapter->tx_queue.comp_ring.intr_idx;
+
+ /* rx queue settings */
+ devRead->misc.numRxQueues = 1;
+ rqc = &adapter->rqd_start->conf;
+ rqc->rxRingBasePA[0] = adapter->rx_queue.rx_ring[0].basePA;
+ rqc->rxRingBasePA[1] = adapter->rx_queue.rx_ring[1].basePA;
+ rqc->compRingBasePA = adapter->rx_queue.comp_ring.basePA;
+ rqc->ddPA = virt_to_phys(adapter->rx_queue.buf_info);
+ rqc->rxRingSize[0] = adapter->rx_queue.rx_ring[0].size;
+ rqc->rxRingSize[1] = adapter->rx_queue.rx_ring[1].size;
+ rqc->compRingSize = adapter->rx_queue.comp_ring.size;
+ rqc->ddLen = sizeof(struct vmxnet3_rx_buf_info) *
+ (rqc->rxRingSize[0] + rqc->rxRingSize[1]);
+ rqc->intrIdx = adapter->rx_queue.comp_ring.intr_idx;
+
+ /* intr settings */
+ devRead->intrConf.autoMask = adapter->intr.mask_mode ==
+ VMXNET3_IMM_AUTO;
+ devRead->intrConf.numIntrs = adapter->intr.num_intrs;
+ for (i = 0; i < adapter->intr.num_intrs; i++)
+ devRead->intrConf.modLevels[i] = adapter->intr.mod_levels[i];
+
+ devRead->intrConf.eventIntrIdx = adapter->intr.event_intr_idx;
+
+ /* rx filter settings */
+ devRead->rxFilterConf.rxMode = 0;
+ vmxnet3_restore_vlan(adapter);
+ /* the rest are already zeroed */
+}
+
+
+int
+vmxnet3_activate_dev(struct vmxnet3_adapter *adapter)
+{
+ int err;
+ u32 ret;
+
+ dev_dbg(&adapter->netdev->dev,
+ "%s: skb_buf_size %d, rx_buf_per_pkt %d, ring sizes"
+ " %u %u %u\n", adapter->netdev->name, adapter->skb_buf_size,
+ adapter->rx_buf_per_pkt, adapter->tx_queue.tx_ring.size,
+ adapter->rx_queue.rx_ring[0].size,
+ adapter->rx_queue.rx_ring[1].size);
+
+ vmxnet3_tq_init(&adapter->tx_queue, adapter);
+ err = vmxnet3_rq_init(&adapter->rx_queue, adapter);
+ if (err) {
+ printk(KERN_ERR "Failed to init rx queue for %s: error %d\n",
+ adapter->netdev->name, err);
+ goto rq_err;
+ }
+
+ err = vmxnet3_request_irqs(adapter);
+ if (err) {
+ printk(KERN_ERR "Failed to setup irq for %s: error %d\n",
+ adapter->netdev->name, err);
+ goto irq_err;
+ }
+
+ vmxnet3_setup_driver_shared(adapter);
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL,
+ VMXNET3_GET_ADDR_LO(adapter->shared_pa));
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH,
+ VMXNET3_GET_ADDR_HI(adapter->shared_pa));
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_ACTIVATE_DEV);
+ ret = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
+
+ if (ret != 0) {
+ printk(KERN_ERR "Failed to activate dev %s: error %u\n",
+ adapter->netdev->name, ret);
+ err = -EINVAL;
+ goto activate_err;
+ }
+ VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD,
+ adapter->rx_queue.rx_ring[0].next2fill);
+ VMXNET3_WRITE_BAR0_REG(adapter, VMXNET3_REG_RXPROD2,
+ adapter->rx_queue.rx_ring[1].next2fill);
+
+ /* Apply the rx filter settins last. */
+ vmxnet3_set_mc(adapter->netdev);
+
+ /*
+ * Check link state when first activating device. It will start the
+ * tx queue if the link is up.
+ */
+ vmxnet3_check_link(adapter);
+
+ napi_enable(&adapter->napi);
+ vmxnet3_enable_all_intrs(adapter);
+ clear_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
+ return 0;
+
+activate_err:
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAL, 0);
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_DSAH, 0);
+ vmxnet3_free_irqs(adapter);
+irq_err:
+rq_err:
+ /* free up buffers we allocated */
+ vmxnet3_rq_cleanup(&adapter->rx_queue, adapter);
+ return err;
+}
+
+
+void
+vmxnet3_reset_dev(struct vmxnet3_adapter *adapter)
+{
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_RESET_DEV);
+}
+
+
+int
+vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter)
+{
+ if (test_and_set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state))
+ return 0;
+
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_QUIESCE_DEV);
+ vmxnet3_disable_all_intrs(adapter);
+
+ napi_disable(&adapter->napi);
+ netif_tx_disable(adapter->netdev);
+ adapter->link_speed = 0;
+ netif_carrier_off(adapter->netdev);
+
+ vmxnet3_tq_cleanup(&adapter->tx_queue, adapter);
+ vmxnet3_rq_cleanup(&adapter->rx_queue, adapter);
+ vmxnet3_free_irqs(adapter);
+ return 0;
+}
+
+
+static void
+vmxnet3_write_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
+{
+ u32 tmp;
+
+ tmp = *(u32 *)mac;
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_MACL, tmp);
+
+ tmp = (mac[5] << 8) | mac[4];
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_MACH, tmp);
+}
+
+
+static int
+vmxnet3_set_mac_addr(struct net_device *netdev, void *p)
+{
+ struct sockaddr *addr = p;
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ vmxnet3_write_mac_addr(adapter, addr->sa_data);
+
+ return 0;
+}
+
+
+/* ==================== initialization and cleanup routines ============ */
+
+static int
+vmxnet3_alloc_pci_resources(struct vmxnet3_adapter *adapter, bool *dma64)
+{
+ int err;
+ unsigned long mmio_start, mmio_len;
+ struct pci_dev *pdev = adapter->pdev;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR "Failed to enable adapter %s: error %d\n",
+ pci_name(pdev), err);
+ return err;
+ }
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) == 0) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) != 0) {
+ printk(KERN_ERR "pci_set_consistent_dma_mask failed "
+ "for adapter %s\n", pci_name(pdev));
+ err = -EIO;
+ goto err_set_mask;
+ }
+ *dma64 = true;
+ } else {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
+ printk(KERN_ERR "pci_set_dma_mask failed for adapter "
+ "%s\n", pci_name(pdev));
+ err = -EIO;
+ goto err_set_mask;
+ }
+ *dma64 = false;
+ }
+
+ err = pci_request_selected_regions(pdev, (1 << 2) - 1,
+ vmxnet3_driver_name);
+ if (err) {
+ printk(KERN_ERR "Failed to request region for adapter %s: "
+ "error %d\n", pci_name(pdev), err);
+ goto err_set_mask;
+ }
+
+ pci_set_master(pdev);
+
+ mmio_start = pci_resource_start(pdev, 0);
+ mmio_len = pci_resource_len(pdev, 0);
+ adapter->hw_addr0 = ioremap(mmio_start, mmio_len);
+ if (!adapter->hw_addr0) {
+ printk(KERN_ERR "Failed to map bar0 for adapter %s\n",
+ pci_name(pdev));
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ mmio_start = pci_resource_start(pdev, 1);
+ mmio_len = pci_resource_len(pdev, 1);
+ adapter->hw_addr1 = ioremap(mmio_start, mmio_len);
+ if (!adapter->hw_addr1) {
+ printk(KERN_ERR "Failed to map bar1 for adapter %s\n",
+ pci_name(pdev));
+ err = -EIO;
+ goto err_bar1;
+ }
+ return 0;
+
+err_bar1:
+ iounmap(adapter->hw_addr0);
+err_ioremap:
+ pci_release_selected_regions(pdev, (1 << 2) - 1);
+err_set_mask:
+ pci_disable_device(pdev);
+ return err;
+}
+
+
+static void
+vmxnet3_free_pci_resources(struct vmxnet3_adapter *adapter)
+{
+ BUG_ON(!adapter->pdev);
+
+ iounmap(adapter->hw_addr0);
+ iounmap(adapter->hw_addr1);
+ pci_release_selected_regions(adapter->pdev, (1 << 2) - 1);
+ pci_disable_device(adapter->pdev);
+}
+
+
+static void
+vmxnet3_adjust_rx_ring_size(struct vmxnet3_adapter *adapter)
+{
+ size_t sz;
+
+ if (adapter->netdev->mtu <= VMXNET3_MAX_SKB_BUF_SIZE -
+ VMXNET3_MAX_ETH_HDR_SIZE) {
+ adapter->skb_buf_size = adapter->netdev->mtu +
+ VMXNET3_MAX_ETH_HDR_SIZE;
+ if (adapter->skb_buf_size < VMXNET3_MIN_T0_BUF_SIZE)
+ adapter->skb_buf_size = VMXNET3_MIN_T0_BUF_SIZE;
+
+ adapter->rx_buf_per_pkt = 1;
+ } else {
+ adapter->skb_buf_size = VMXNET3_MAX_SKB_BUF_SIZE;
+ sz = adapter->netdev->mtu - VMXNET3_MAX_SKB_BUF_SIZE +
+ VMXNET3_MAX_ETH_HDR_SIZE;
+ adapter->rx_buf_per_pkt = 1 + (sz + PAGE_SIZE - 1) / PAGE_SIZE;
+ }
+
+ /*
+ * for simplicity, force the ring0 size to be a multiple of
+ * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN
+ */
+ sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN;
+ adapter->rx_queue.rx_ring[0].size = (adapter->rx_queue.rx_ring[0].size +
+ sz - 1) / sz * sz;
+ adapter->rx_queue.rx_ring[0].size = min_t(u32,
+ adapter->rx_queue.rx_ring[0].size,
+ VMXNET3_RX_RING_MAX_SIZE / sz * sz);
+}
+
+
+int
+vmxnet3_create_queues(struct vmxnet3_adapter *adapter, u32 tx_ring_size,
+ u32 rx_ring_size, u32 rx_ring2_size)
+{
+ int err;
+
+ adapter->tx_queue.tx_ring.size = tx_ring_size;
+ adapter->tx_queue.data_ring.size = tx_ring_size;
+ adapter->tx_queue.comp_ring.size = tx_ring_size;
+ adapter->tx_queue.shared = &adapter->tqd_start->ctrl;
+ adapter->tx_queue.stopped = true;
+ err = vmxnet3_tq_create(&adapter->tx_queue, adapter);
+ if (err)
+ return err;
+
+ adapter->rx_queue.rx_ring[0].size = rx_ring_size;
+ adapter->rx_queue.rx_ring[1].size = rx_ring2_size;
+ vmxnet3_adjust_rx_ring_size(adapter);
+ adapter->rx_queue.comp_ring.size = adapter->rx_queue.rx_ring[0].size +
+ adapter->rx_queue.rx_ring[1].size;
+ adapter->rx_queue.qid = 0;
+ adapter->rx_queue.qid2 = 1;
+ adapter->rx_queue.shared = &adapter->rqd_start->ctrl;
+ err = vmxnet3_rq_create(&adapter->rx_queue, adapter);
+ if (err)
+ vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+
+ return err;
+}
+
+static int
+vmxnet3_open(struct net_device *netdev)
+{
+ struct vmxnet3_adapter *adapter;
+ int err;
+
+ adapter = netdev_priv(netdev);
+
+ spin_lock_init(&adapter->tx_queue.tx_lock);
+
+ err = vmxnet3_create_queues(adapter, VMXNET3_DEF_TX_RING_SIZE,
+ VMXNET3_DEF_RX_RING_SIZE,
+ VMXNET3_DEF_RX_RING_SIZE);
+ if (err)
+ goto queue_err;
+
+ err = vmxnet3_activate_dev(adapter);
+ if (err)
+ goto activate_err;
+
+ return 0;
+
+activate_err:
+ vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+ vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+queue_err:
+ return err;
+}
+
+
+static int
+vmxnet3_close(struct net_device *netdev)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ /*
+ * Reset_work may be in the middle of resetting the device, wait for its
+ * completion.
+ */
+ while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
+ msleep(1);
+
+ vmxnet3_quiesce_dev(adapter);
+
+ vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+ vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+
+ clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
+
+
+ return 0;
+}
+
+
+void
+vmxnet3_force_close(struct vmxnet3_adapter *adapter)
+{
+ /*
+ * we must clear VMXNET3_STATE_BIT_RESETTING, otherwise
+ * vmxnet3_close() will deadlock.
+ */
+ BUG_ON(test_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state));
+
+ /* we need to enable NAPI, otherwise dev_close will deadlock */
+ napi_enable(&adapter->napi);
+ dev_close(adapter->netdev);
+}
+
+
+static int
+vmxnet3_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ int err = 0;
+
+ if (new_mtu < VMXNET3_MIN_MTU || new_mtu > VMXNET3_MAX_MTU)
+ return -EINVAL;
+
+ if (new_mtu > 1500 && !adapter->jumbo_frame)
+ return -EINVAL;
+
+ netdev->mtu = new_mtu;
+
+ /*
+ * Reset_work may be in the middle of resetting the device, wait for its
+ * completion.
+ */
+ while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (netif_running(netdev)) {
+ vmxnet3_quiesce_dev(adapter);
+ vmxnet3_reset_dev(adapter);
+
+ /* we need to re-create the rx queue based on the new mtu */
+ vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+ vmxnet3_adjust_rx_ring_size(adapter);
+ adapter->rx_queue.comp_ring.size =
+ adapter->rx_queue.rx_ring[0].size +
+ adapter->rx_queue.rx_ring[1].size;
+ err = vmxnet3_rq_create(&adapter->rx_queue, adapter);
+ if (err) {
+ printk(KERN_ERR "%s: failed to re-create rx queue,"
+ " error %d. Closing it.\n", netdev->name, err);
+ goto out;
+ }
+
+ err = vmxnet3_activate_dev(adapter);
+ if (err) {
+ printk(KERN_ERR "%s: failed to re-activate, error %d. "
+ "Closing it\n", netdev->name, err);
+ goto out;
+ }
+ }
+
+out:
+ clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
+ if (err)
+ vmxnet3_force_close(adapter);
+
+ return err;
+}
+
+
+static void
+vmxnet3_declare_features(struct vmxnet3_adapter *adapter, bool dma64)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER |
+ NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_LRO;
+
+ printk(KERN_INFO "features: sg csum vlan jf tso tsoIPv6 lro");
+
+ adapter->rxcsum = true;
+ adapter->jumbo_frame = true;
+ adapter->lro = true;
+
+ if (dma64) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ printk(" highDMA");
+ }
+
+ netdev->vlan_features = netdev->features;
+ printk("\n");
+}
+
+
+static void
+vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
+{
+ u32 tmp;
+
+ tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACL);
+ *(u32 *)mac = tmp;
+
+ tmp = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_MACH);
+ mac[4] = tmp & 0xff;
+ mac[5] = (tmp >> 8) & 0xff;
+}
+
+
+static void
+vmxnet3_alloc_intr_resources(struct vmxnet3_adapter *adapter)
+{
+ u32 cfg;
+
+ /* intr settings */
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_GET_CONF_INTR);
+ cfg = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_CMD);
+ adapter->intr.type = cfg & 0x3;
+ adapter->intr.mask_mode = (cfg >> 2) & 0x3;
+
+ if (adapter->intr.type == VMXNET3_IT_AUTO) {
+ int err;
+
+#ifdef CONFIG_PCI_MSI
+ adapter->intr.msix_entries[0].entry = 0;
+ err = pci_enable_msix(adapter->pdev, adapter->intr.msix_entries,
+ VMXNET3_LINUX_MAX_MSIX_VECT);
+ if (!err) {
+ adapter->intr.num_intrs = 1;
+ adapter->intr.type = VMXNET3_IT_MSIX;
+ return;
+ }
+#endif
+
+ err = pci_enable_msi(adapter->pdev);
+ if (!err) {
+ adapter->intr.num_intrs = 1;
+ adapter->intr.type = VMXNET3_IT_MSI;
+ return;
+ }
+ }
+
+ adapter->intr.type = VMXNET3_IT_INTX;
+
+ /* INT-X related setting */
+ adapter->intr.num_intrs = 1;
+}
+
+
+static void
+vmxnet3_free_intr_resources(struct vmxnet3_adapter *adapter)
+{
+ if (adapter->intr.type == VMXNET3_IT_MSIX)
+ pci_disable_msix(adapter->pdev);
+ else if (adapter->intr.type == VMXNET3_IT_MSI)
+ pci_disable_msi(adapter->pdev);
+ else
+ BUG_ON(adapter->intr.type != VMXNET3_IT_INTX);
+}
+
+
+static void
+vmxnet3_tx_timeout(struct net_device *netdev)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ adapter->tx_timeout_count++;
+
+ printk(KERN_ERR "%s: tx hang\n", adapter->netdev->name);
+ schedule_work(&adapter->work);
+}
+
+
+static void
+vmxnet3_reset_work(struct work_struct *data)
+{
+ struct vmxnet3_adapter *adapter;
+
+ adapter = container_of(data, struct vmxnet3_adapter, work);
+
+ /* if another thread is resetting the device, no need to proceed */
+ if (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
+ return;
+
+ /* if the device is closed, we must leave it alone */
+ if (netif_running(adapter->netdev)) {
+ printk(KERN_INFO "%s: resetting\n", adapter->netdev->name);
+ vmxnet3_quiesce_dev(adapter);
+ vmxnet3_reset_dev(adapter);
+ vmxnet3_activate_dev(adapter);
+ } else {
+ printk(KERN_INFO "%s: already closed\n", adapter->netdev->name);
+ }
+
+ clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
+}
+
+
+static int __devinit
+vmxnet3_probe_device(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ static const struct net_device_ops vmxnet3_netdev_ops = {
+ .ndo_open = vmxnet3_open,
+ .ndo_stop = vmxnet3_close,
+ .ndo_start_xmit = vmxnet3_xmit_frame,
+ .ndo_set_mac_address = vmxnet3_set_mac_addr,
+ .ndo_change_mtu = vmxnet3_change_mtu,
+ .ndo_get_stats = vmxnet3_get_stats,
+ .ndo_tx_timeout = vmxnet3_tx_timeout,
+ .ndo_set_multicast_list = vmxnet3_set_mc,
+ .ndo_vlan_rx_register = vmxnet3_vlan_rx_register,
+ .ndo_vlan_rx_add_vid = vmxnet3_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = vmxnet3_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = vmxnet3_netpoll,
+#endif
+ };
+ int err;
+ bool dma64 = false; /* stupid gcc */
+ u32 ver;
+ struct net_device *netdev;
+ struct vmxnet3_adapter *adapter;
+ u8 mac[ETH_ALEN];
+
+ netdev = alloc_etherdev(sizeof(struct vmxnet3_adapter));
+ if (!netdev) {
+ printk(KERN_ERR "Failed to alloc ethernet device for adapter "
+ "%s\n", pci_name(pdev));
+ return -ENOMEM;
+ }
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+
+ adapter->shared = pci_alloc_consistent(adapter->pdev,
+ sizeof(struct Vmxnet3_DriverShared),
+ &adapter->shared_pa);
+ if (!adapter->shared) {
+ printk(KERN_ERR "Failed to allocate memory for %s\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto err_alloc_shared;
+ }
+
+ adapter->tqd_start = pci_alloc_consistent(adapter->pdev,
+ sizeof(struct Vmxnet3_TxQueueDesc) +
+ sizeof(struct Vmxnet3_RxQueueDesc),
+ &adapter->queue_desc_pa);
+
+ if (!adapter->tqd_start) {
+ printk(KERN_ERR "Failed to allocate memory for %s\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto err_alloc_queue_desc;
+ }
+ adapter->rqd_start = (struct Vmxnet3_RxQueueDesc *)(adapter->tqd_start
+ + 1);
+
+ adapter->pm_conf = kmalloc(sizeof(struct Vmxnet3_PMConf), GFP_KERNEL);
+ if (adapter->pm_conf == NULL) {
+ printk(KERN_ERR "Failed to allocate memory for %s\n",
+ pci_name(pdev));
+ err = -ENOMEM;
+ goto err_alloc_pm;
+ }
+
+ err = vmxnet3_alloc_pci_resources(adapter, &dma64);
+ if (err < 0)
+ goto err_alloc_pci;
+
+ ver = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_VRRS);
+ if (ver & 1) {
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_VRRS, 1);
+ } else {
+ printk(KERN_ERR "Incompatible h/w version (0x%x) for adapter"
+ " %s\n", ver, pci_name(pdev));
+ err = -EBUSY;
+ goto err_ver;
+ }
+
+ ver = VMXNET3_READ_BAR1_REG(adapter, VMXNET3_REG_UVRS);
+ if (ver & 1) {
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_UVRS, 1);
+ } else {
+ printk(KERN_ERR "Incompatible upt version (0x%x) for "
+ "adapter %s\n", ver, pci_name(pdev));
+ err = -EBUSY;
+ goto err_ver;
+ }
+
+ vmxnet3_declare_features(adapter, dma64);
+
+ adapter->dev_number = atomic_read(&devices_found);
+ vmxnet3_alloc_intr_resources(adapter);
+
+ vmxnet3_read_mac_addr(adapter, mac);
+ memcpy(netdev->dev_addr, mac, netdev->addr_len);
+
+ netdev->netdev_ops = &vmxnet3_netdev_ops;
+ netdev->watchdog_timeo = 5 * HZ;
+ vmxnet3_set_ethtool_ops(netdev);
+
+ INIT_WORK(&adapter->work, vmxnet3_reset_work);
+
+ netif_napi_add(netdev, &adapter->napi, vmxnet3_poll, 64);
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+ err = register_netdev(netdev);
+
+ if (err) {
+ printk(KERN_ERR "Failed to register adapter %s\n",
+ pci_name(pdev));
+ goto err_register;
+ }
+
+ set_bit(VMXNET3_STATE_BIT_QUIESCED, &adapter->state);
+ atomic_inc(&devices_found);
+ return 0;
+
+err_register:
+ vmxnet3_free_intr_resources(adapter);
+err_ver:
+ vmxnet3_free_pci_resources(adapter);
+err_alloc_pci:
+ kfree(adapter->pm_conf);
+err_alloc_pm:
+ pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) +
+ sizeof(struct Vmxnet3_RxQueueDesc),
+ adapter->tqd_start, adapter->queue_desc_pa);
+err_alloc_queue_desc:
+ pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared),
+ adapter->shared, adapter->shared_pa);
+err_alloc_shared:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+ return err;
+}
+
+
+static void __devexit
+vmxnet3_remove_device(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ flush_scheduled_work();
+
+ unregister_netdev(netdev);
+
+ vmxnet3_free_intr_resources(adapter);
+ vmxnet3_free_pci_resources(adapter);
+ kfree(adapter->pm_conf);
+ pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_TxQueueDesc) +
+ sizeof(struct Vmxnet3_RxQueueDesc),
+ adapter->tqd_start, adapter->queue_desc_pa);
+ pci_free_consistent(adapter->pdev, sizeof(struct Vmxnet3_DriverShared),
+ adapter->shared, adapter->shared_pa);
+ free_netdev(netdev);
+}
+
+
+#ifdef CONFIG_PM
+
+static int
+vmxnet3_suspend(struct device *device)
+{
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ struct Vmxnet3_PMConf *pmConf;
+ struct ethhdr *ehdr;
+ struct arphdr *ahdr;
+ u8 *arpreq;
+ struct in_device *in_dev;
+ struct in_ifaddr *ifa;
+ int i = 0;
+
+ if (!netif_running(netdev))
+ return 0;
+
+ vmxnet3_disable_all_intrs(adapter);
+ vmxnet3_free_irqs(adapter);
+ vmxnet3_free_intr_resources(adapter);
+
+ netif_device_detach(netdev);
+ netif_stop_queue(netdev);
+
+ /* Create wake-up filters. */
+ pmConf = adapter->pm_conf;
+ memset(pmConf, 0, sizeof(*pmConf));
+
+ if (adapter->wol & WAKE_UCAST) {
+ pmConf->filters[i].patternSize = ETH_ALEN;
+ pmConf->filters[i].maskSize = 1;
+ memcpy(pmConf->filters[i].pattern, netdev->dev_addr, ETH_ALEN);
+ pmConf->filters[i].mask[0] = 0x3F; /* LSB ETH_ALEN bits */
+
+ pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER;
+ i++;
+ }
+
+ if (adapter->wol & WAKE_ARP) {
+ in_dev = in_dev_get(netdev);
+ if (!in_dev)
+ goto skip_arp;
+
+ ifa = (struct in_ifaddr *)in_dev->ifa_list;
+ if (!ifa)
+ goto skip_arp;
+
+ pmConf->filters[i].patternSize = ETH_HLEN + /* Ethernet header*/
+ sizeof(struct arphdr) + /* ARP header */
+ 2 * ETH_ALEN + /* 2 Ethernet addresses*/
+ 2 * sizeof(u32); /*2 IPv4 addresses */
+ pmConf->filters[i].maskSize =
+ (pmConf->filters[i].patternSize - 1) / 8 + 1;
+
+ /* ETH_P_ARP in Ethernet header. */
+ ehdr = (struct ethhdr *)pmConf->filters[i].pattern;
+ ehdr->h_proto = htons(ETH_P_ARP);
+
+ /* ARPOP_REQUEST in ARP header. */
+ ahdr = (struct arphdr *)&pmConf->filters[i].pattern[ETH_HLEN];
+ ahdr->ar_op = htons(ARPOP_REQUEST);
+ arpreq = (u8 *)(ahdr + 1);
+
+ /* The Unicast IPv4 address in 'tip' field. */
+ arpreq += 2 * ETH_ALEN + sizeof(u32);
+ *(u32 *)arpreq = ifa->ifa_address;
+
+ /* The mask for the relevant bits. */
+ pmConf->filters[i].mask[0] = 0x00;
+ pmConf->filters[i].mask[1] = 0x30; /* ETH_P_ARP */
+ pmConf->filters[i].mask[2] = 0x30; /* ARPOP_REQUEST */
+ pmConf->filters[i].mask[3] = 0x00;
+ pmConf->filters[i].mask[4] = 0xC0; /* IPv4 TIP */
+ pmConf->filters[i].mask[5] = 0x03; /* IPv4 TIP */
+ in_dev_put(in_dev);
+
+ pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_FILTER;
+ i++;
+ }
+
+skip_arp:
+ if (adapter->wol & WAKE_MAGIC)
+ pmConf->wakeUpEvents |= VMXNET3_PM_WAKEUP_MAGIC;
+
+ pmConf->numFilters = i;
+
+ adapter->shared->devRead.pmConfDesc.confVer = 1;
+ adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf);
+ adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf);
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_PMCFG);
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, pci_choose_state(pdev, PMSG_SUSPEND),
+ adapter->wol);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, PMSG_SUSPEND));
+
+ return 0;
+}
+
+
+static int
+vmxnet3_resume(struct device *device)
+{
+ int err;
+ struct pci_dev *pdev = to_pci_dev(device);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ struct Vmxnet3_PMConf *pmConf;
+
+ if (!netif_running(netdev))
+ return 0;
+
+ /* Destroy wake-up filters. */
+ pmConf = adapter->pm_conf;
+ memset(pmConf, 0, sizeof(*pmConf));
+
+ adapter->shared->devRead.pmConfDesc.confVer = 1;
+ adapter->shared->devRead.pmConfDesc.confLen = sizeof(*pmConf);
+ adapter->shared->devRead.pmConfDesc.confPA = virt_to_phys(pmConf);
+
+ netif_device_attach(netdev);
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ err = pci_enable_device_mem(pdev);
+ if (err != 0)
+ return err;
+
+ pci_enable_wake(pdev, PCI_D0, 0);
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_PMCFG);
+ vmxnet3_alloc_intr_resources(adapter);
+ vmxnet3_request_irqs(adapter);
+ vmxnet3_enable_all_intrs(adapter);
+
+ return 0;
+}
+
+static struct dev_pm_ops vmxnet3_pm_ops = {
+ .suspend = vmxnet3_suspend,
+ .resume = vmxnet3_resume,
+};
+#endif
+
+static struct pci_driver vmxnet3_driver = {
+ .name = vmxnet3_driver_name,
+ .id_table = vmxnet3_pciid_table,
+ .probe = vmxnet3_probe_device,
+ .remove = __devexit_p(vmxnet3_remove_device),
+#ifdef CONFIG_PM
+ .driver.pm = &vmxnet3_pm_ops,
+#endif
+};
+
+
+static int __init
+vmxnet3_init_module(void)
+{
+ printk(KERN_INFO "%s - version %s\n", VMXNET3_DRIVER_DESC,
+ VMXNET3_DRIVER_VERSION_REPORT);
+ return pci_register_driver(&vmxnet3_driver);
+}
+
+module_init(vmxnet3_init_module);
+
+
+static void
+vmxnet3_exit_module(void)
+{
+ pci_unregister_driver(&vmxnet3_driver);
+}
+
+module_exit(vmxnet3_exit_module);
+
+MODULE_AUTHOR("VMware, Inc.");
+MODULE_DESCRIPTION(VMXNET3_DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(VMXNET3_DRIVER_VERSION_STRING);
--- /dev/null
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+
+#include "vmxnet3_int.h"
+
+struct vmxnet3_stat_desc {
+ char desc[ETH_GSTRING_LEN];
+ int offset;
+};
+
+
+static u32
+vmxnet3_get_rx_csum(struct net_device *netdev)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ return adapter->rxcsum;
+}
+
+
+static int
+vmxnet3_set_rx_csum(struct net_device *netdev, u32 val)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->rxcsum != val) {
+ adapter->rxcsum = val;
+ if (netif_running(netdev)) {
+ if (val)
+ adapter->shared->devRead.misc.uptFeatures |=
+ UPT1_F_RXCSUM;
+ else
+ adapter->shared->devRead.misc.uptFeatures &=
+ ~UPT1_F_RXCSUM;
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_FEATURE);
+ }
+ }
+ return 0;
+}
+
+
+/* per tq stats maintained by the device */
+static const struct vmxnet3_stat_desc
+vmxnet3_tq_dev_stats[] = {
+ /* description, offset */
+ { "TSO pkts tx", offsetof(struct UPT1_TxStats, TSOPktsTxOK) },
+ { "TSO bytes tx", offsetof(struct UPT1_TxStats, TSOBytesTxOK) },
+ { "ucast pkts tx", offsetof(struct UPT1_TxStats, ucastPktsTxOK) },
+ { "ucast bytes tx", offsetof(struct UPT1_TxStats, ucastBytesTxOK) },
+ { "mcast pkts tx", offsetof(struct UPT1_TxStats, mcastPktsTxOK) },
+ { "mcast bytes tx", offsetof(struct UPT1_TxStats, mcastBytesTxOK) },
+ { "bcast pkts tx", offsetof(struct UPT1_TxStats, bcastPktsTxOK) },
+ { "bcast bytes tx", offsetof(struct UPT1_TxStats, bcastBytesTxOK) },
+ { "pkts tx err", offsetof(struct UPT1_TxStats, pktsTxError) },
+ { "pkts tx discard", offsetof(struct UPT1_TxStats, pktsTxDiscard) },
+};
+
+/* per tq stats maintained by the driver */
+static const struct vmxnet3_stat_desc
+vmxnet3_tq_driver_stats[] = {
+ /* description, offset */
+ {"drv dropped tx total", offsetof(struct vmxnet3_tq_driver_stats,
+ drop_total) },
+ { " too many frags", offsetof(struct vmxnet3_tq_driver_stats,
+ drop_too_many_frags) },
+ { " giant hdr", offsetof(struct vmxnet3_tq_driver_stats,
+ drop_oversized_hdr) },
+ { " hdr err", offsetof(struct vmxnet3_tq_driver_stats,
+ drop_hdr_inspect_err) },
+ { " tso", offsetof(struct vmxnet3_tq_driver_stats,
+ drop_tso) },
+ { "ring full", offsetof(struct vmxnet3_tq_driver_stats,
+ tx_ring_full) },
+ { "pkts linearized", offsetof(struct vmxnet3_tq_driver_stats,
+ linearized) },
+ { "hdr cloned", offsetof(struct vmxnet3_tq_driver_stats,
+ copy_skb_header) },
+ { "giant hdr", offsetof(struct vmxnet3_tq_driver_stats,
+ oversized_hdr) },
+};
+
+/* per rq stats maintained by the device */
+static const struct vmxnet3_stat_desc
+vmxnet3_rq_dev_stats[] = {
+ { "LRO pkts rx", offsetof(struct UPT1_RxStats, LROPktsRxOK) },
+ { "LRO byte rx", offsetof(struct UPT1_RxStats, LROBytesRxOK) },
+ { "ucast pkts rx", offsetof(struct UPT1_RxStats, ucastPktsRxOK) },
+ { "ucast bytes rx", offsetof(struct UPT1_RxStats, ucastBytesRxOK) },
+ { "mcast pkts rx", offsetof(struct UPT1_RxStats, mcastPktsRxOK) },
+ { "mcast bytes rx", offsetof(struct UPT1_RxStats, mcastBytesRxOK) },
+ { "bcast pkts rx", offsetof(struct UPT1_RxStats, bcastPktsRxOK) },
+ { "bcast bytes rx", offsetof(struct UPT1_RxStats, bcastBytesRxOK) },
+ { "pkts rx out of buf", offsetof(struct UPT1_RxStats, pktsRxOutOfBuf) },
+ { "pkts rx err", offsetof(struct UPT1_RxStats, pktsRxError) },
+};
+
+/* per rq stats maintained by the driver */
+static const struct vmxnet3_stat_desc
+vmxnet3_rq_driver_stats[] = {
+ /* description, offset */
+ { "drv dropped rx total", offsetof(struct vmxnet3_rq_driver_stats,
+ drop_total) },
+ { " err", offsetof(struct vmxnet3_rq_driver_stats,
+ drop_err) },
+ { " fcs", offsetof(struct vmxnet3_rq_driver_stats,
+ drop_fcs) },
+ { "rx buf alloc fail", offsetof(struct vmxnet3_rq_driver_stats,
+ rx_buf_alloc_failure) },
+};
+
+/* gloabl stats maintained by the driver */
+static const struct vmxnet3_stat_desc
+vmxnet3_global_stats[] = {
+ /* description, offset */
+ { "tx timeout count", offsetof(struct vmxnet3_adapter,
+ tx_timeout_count) }
+};
+
+
+struct net_device_stats *
+vmxnet3_get_stats(struct net_device *netdev)
+{
+ struct vmxnet3_adapter *adapter;
+ struct vmxnet3_tq_driver_stats *drvTxStats;
+ struct vmxnet3_rq_driver_stats *drvRxStats;
+ struct UPT1_TxStats *devTxStats;
+ struct UPT1_RxStats *devRxStats;
+ struct net_device_stats *net_stats = &netdev->stats;
+
+ adapter = netdev_priv(netdev);
+
+ /* Collect the dev stats into the shared area */
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS);
+
+ /* Assuming that we have a single queue device */
+ devTxStats = &adapter->tqd_start->stats;
+ devRxStats = &adapter->rqd_start->stats;
+
+ /* Get access to the driver stats per queue */
+ drvTxStats = &adapter->tx_queue.stats;
+ drvRxStats = &adapter->rx_queue.stats;
+
+ memset(net_stats, 0, sizeof(*net_stats));
+
+ net_stats->rx_packets = devRxStats->ucastPktsRxOK +
+ devRxStats->mcastPktsRxOK +
+ devRxStats->bcastPktsRxOK;
+
+ net_stats->tx_packets = devTxStats->ucastPktsTxOK +
+ devTxStats->mcastPktsTxOK +
+ devTxStats->bcastPktsTxOK;
+
+ net_stats->rx_bytes = devRxStats->ucastBytesRxOK +
+ devRxStats->mcastBytesRxOK +
+ devRxStats->bcastBytesRxOK;
+
+ net_stats->tx_bytes = devTxStats->ucastBytesTxOK +
+ devTxStats->mcastBytesTxOK +
+ devTxStats->bcastBytesTxOK;
+
+ net_stats->rx_errors = devRxStats->pktsRxError;
+ net_stats->tx_errors = devTxStats->pktsTxError;
+ net_stats->rx_dropped = drvRxStats->drop_total;
+ net_stats->tx_dropped = drvTxStats->drop_total;
+ net_stats->multicast = devRxStats->mcastPktsRxOK;
+
+ return net_stats;
+}
+
+static int
+vmxnet3_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(vmxnet3_tq_dev_stats) +
+ ARRAY_SIZE(vmxnet3_tq_driver_stats) +
+ ARRAY_SIZE(vmxnet3_rq_dev_stats) +
+ ARRAY_SIZE(vmxnet3_rq_driver_stats) +
+ ARRAY_SIZE(vmxnet3_global_stats);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+
+static int
+vmxnet3_get_regs_len(struct net_device *netdev)
+{
+ return 20 * sizeof(u32);
+}
+
+
+static void
+vmxnet3_get_drvinfo(struct net_device *netdev, struct ethtool_drvinfo *drvinfo)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ strlcpy(drvinfo->driver, vmxnet3_driver_name, sizeof(drvinfo->driver));
+ drvinfo->driver[sizeof(drvinfo->driver) - 1] = '\0';
+
+ strlcpy(drvinfo->version, VMXNET3_DRIVER_VERSION_REPORT,
+ sizeof(drvinfo->version));
+ drvinfo->driver[sizeof(drvinfo->version) - 1] = '\0';
+
+ strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version));
+ drvinfo->fw_version[sizeof(drvinfo->fw_version) - 1] = '\0';
+
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ ETHTOOL_BUSINFO_LEN);
+ drvinfo->n_stats = vmxnet3_get_sset_count(netdev, ETH_SS_STATS);
+ drvinfo->testinfo_len = 0;
+ drvinfo->eedump_len = 0;
+ drvinfo->regdump_len = vmxnet3_get_regs_len(netdev);
+}
+
+
+static void
+vmxnet3_get_strings(struct net_device *netdev, u32 stringset, u8 *buf)
+{
+ if (stringset == ETH_SS_STATS) {
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++) {
+ memcpy(buf, vmxnet3_tq_dev_stats[i].desc,
+ ETH_GSTRING_LEN);
+ buf += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++) {
+ memcpy(buf, vmxnet3_tq_driver_stats[i].desc,
+ ETH_GSTRING_LEN);
+ buf += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++) {
+ memcpy(buf, vmxnet3_rq_dev_stats[i].desc,
+ ETH_GSTRING_LEN);
+ buf += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++) {
+ memcpy(buf, vmxnet3_rq_driver_stats[i].desc,
+ ETH_GSTRING_LEN);
+ buf += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++) {
+ memcpy(buf, vmxnet3_global_stats[i].desc,
+ ETH_GSTRING_LEN);
+ buf += ETH_GSTRING_LEN;
+ }
+ }
+}
+
+static u32
+vmxnet3_get_flags(struct net_device *netdev) {
+ return netdev->features;
+}
+
+static int
+vmxnet3_set_flags(struct net_device *netdev, u32 data) {
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ u8 lro_requested = (data & ETH_FLAG_LRO) == 0 ? 0 : 1;
+ u8 lro_present = (netdev->features & NETIF_F_LRO) == 0 ? 0 : 1;
+
+ if (lro_requested ^ lro_present) {
+ /* toggle the LRO feature*/
+ netdev->features ^= NETIF_F_LRO;
+
+ /* update harware LRO capability accordingly */
+ if (lro_requested)
+ adapter->shared->devRead.misc.uptFeatures &= UPT1_F_LRO;
+ else
+ adapter->shared->devRead.misc.uptFeatures &=
+ ~UPT1_F_LRO;
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD,
+ VMXNET3_CMD_UPDATE_FEATURE);
+ }
+ return 0;
+}
+
+static void
+vmxnet3_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *buf)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ u8 *base;
+ int i;
+
+ VMXNET3_WRITE_BAR1_REG(adapter, VMXNET3_REG_CMD, VMXNET3_CMD_GET_STATS);
+
+ /* this does assume each counter is 64-bit wide */
+
+ base = (u8 *)&adapter->tqd_start->stats;
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_dev_stats); i++)
+ *buf++ = *(u64 *)(base + vmxnet3_tq_dev_stats[i].offset);
+
+ base = (u8 *)&adapter->tx_queue.stats;
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_tq_driver_stats); i++)
+ *buf++ = *(u64 *)(base + vmxnet3_tq_driver_stats[i].offset);
+
+ base = (u8 *)&adapter->rqd_start->stats;
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_dev_stats); i++)
+ *buf++ = *(u64 *)(base + vmxnet3_rq_dev_stats[i].offset);
+
+ base = (u8 *)&adapter->rx_queue.stats;
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_rq_driver_stats); i++)
+ *buf++ = *(u64 *)(base + vmxnet3_rq_driver_stats[i].offset);
+
+ base = (u8 *)adapter;
+ for (i = 0; i < ARRAY_SIZE(vmxnet3_global_stats); i++)
+ *buf++ = *(u64 *)(base + vmxnet3_global_stats[i].offset);
+}
+
+
+static void
+vmxnet3_get_regs(struct net_device *netdev, struct ethtool_regs *regs, void *p)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ u32 *buf = p;
+
+ memset(p, 0, vmxnet3_get_regs_len(netdev));
+
+ regs->version = 1;
+
+ /* Update vmxnet3_get_regs_len if we want to dump more registers */
+
+ /* make each ring use multiple of 16 bytes */
+ buf[0] = adapter->tx_queue.tx_ring.next2fill;
+ buf[1] = adapter->tx_queue.tx_ring.next2comp;
+ buf[2] = adapter->tx_queue.tx_ring.gen;
+ buf[3] = 0;
+
+ buf[4] = adapter->tx_queue.comp_ring.next2proc;
+ buf[5] = adapter->tx_queue.comp_ring.gen;
+ buf[6] = adapter->tx_queue.stopped;
+ buf[7] = 0;
+
+ buf[8] = adapter->rx_queue.rx_ring[0].next2fill;
+ buf[9] = adapter->rx_queue.rx_ring[0].next2comp;
+ buf[10] = adapter->rx_queue.rx_ring[0].gen;
+ buf[11] = 0;
+
+ buf[12] = adapter->rx_queue.rx_ring[1].next2fill;
+ buf[13] = adapter->rx_queue.rx_ring[1].next2comp;
+ buf[14] = adapter->rx_queue.rx_ring[1].gen;
+ buf[15] = 0;
+
+ buf[16] = adapter->rx_queue.comp_ring.next2proc;
+ buf[17] = adapter->rx_queue.comp_ring.gen;
+ buf[18] = 0;
+ buf[19] = 0;
+}
+
+
+static void
+vmxnet3_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_UCAST | WAKE_ARP | WAKE_MAGIC;
+ wol->wolopts = adapter->wol;
+}
+
+
+static int
+vmxnet3_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_MCAST | WAKE_BCAST |
+ WAKE_MAGICSECURE)) {
+ return -EOPNOTSUPP;
+ }
+
+ adapter->wol = wol->wolopts;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+
+static int
+vmxnet3_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ ecmd->supported = SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full |
+ SUPPORTED_TP;
+ ecmd->advertising = ADVERTISED_TP;
+ ecmd->port = PORT_TP;
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ if (adapter->link_speed) {
+ ecmd->speed = adapter->link_speed;
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ecmd->speed = -1;
+ ecmd->duplex = -1;
+ }
+ return 0;
+}
+
+
+static void
+vmxnet3_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *param)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+
+ param->rx_max_pending = VMXNET3_RX_RING_MAX_SIZE;
+ param->tx_max_pending = VMXNET3_TX_RING_MAX_SIZE;
+ param->rx_mini_max_pending = 0;
+ param->rx_jumbo_max_pending = 0;
+
+ param->rx_pending = adapter->rx_queue.rx_ring[0].size;
+ param->tx_pending = adapter->tx_queue.tx_ring.size;
+ param->rx_mini_pending = 0;
+ param->rx_jumbo_pending = 0;
+}
+
+
+static int
+vmxnet3_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *param)
+{
+ struct vmxnet3_adapter *adapter = netdev_priv(netdev);
+ u32 new_tx_ring_size, new_rx_ring_size;
+ u32 sz;
+ int err = 0;
+
+ if (param->tx_pending == 0 || param->tx_pending >
+ VMXNET3_TX_RING_MAX_SIZE)
+ return -EINVAL;
+
+ if (param->rx_pending == 0 || param->rx_pending >
+ VMXNET3_RX_RING_MAX_SIZE)
+ return -EINVAL;
+
+
+ /* round it up to a multiple of VMXNET3_RING_SIZE_ALIGN */
+ new_tx_ring_size = (param->tx_pending + VMXNET3_RING_SIZE_MASK) &
+ ~VMXNET3_RING_SIZE_MASK;
+ new_tx_ring_size = min_t(u32, new_tx_ring_size,
+ VMXNET3_TX_RING_MAX_SIZE);
+ if (new_tx_ring_size > VMXNET3_TX_RING_MAX_SIZE || (new_tx_ring_size %
+ VMXNET3_RING_SIZE_ALIGN) != 0)
+ return -EINVAL;
+
+ /* ring0 has to be a multiple of
+ * rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN
+ */
+ sz = adapter->rx_buf_per_pkt * VMXNET3_RING_SIZE_ALIGN;
+ new_rx_ring_size = (param->rx_pending + sz - 1) / sz * sz;
+ new_rx_ring_size = min_t(u32, new_rx_ring_size,
+ VMXNET3_RX_RING_MAX_SIZE / sz * sz);
+ if (new_rx_ring_size > VMXNET3_RX_RING_MAX_SIZE || (new_rx_ring_size %
+ sz) != 0)
+ return -EINVAL;
+
+ if (new_tx_ring_size == adapter->tx_queue.tx_ring.size &&
+ new_rx_ring_size == adapter->rx_queue.rx_ring[0].size) {
+ return 0;
+ }
+
+ /*
+ * Reset_work may be in the middle of resetting the device, wait for its
+ * completion.
+ */
+ while (test_and_set_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (netif_running(netdev)) {
+ vmxnet3_quiesce_dev(adapter);
+ vmxnet3_reset_dev(adapter);
+
+ /* recreate the rx queue and the tx queue based on the
+ * new sizes */
+ vmxnet3_tq_destroy(&adapter->tx_queue, adapter);
+ vmxnet3_rq_destroy(&adapter->rx_queue, adapter);
+
+ err = vmxnet3_create_queues(adapter, new_tx_ring_size,
+ new_rx_ring_size, VMXNET3_DEF_RX_RING_SIZE);
+ if (err) {
+ /* failed, most likely because of OOM, try default
+ * size */
+ printk(KERN_ERR "%s: failed to apply new sizes, try the"
+ " default ones\n", netdev->name);
+ err = vmxnet3_create_queues(adapter,
+ VMXNET3_DEF_TX_RING_SIZE,
+ VMXNET3_DEF_RX_RING_SIZE,
+ VMXNET3_DEF_RX_RING_SIZE);
+ if (err) {
+ printk(KERN_ERR "%s: failed to create queues "
+ "with default sizes. Closing it\n",
+ netdev->name);
+ goto out;
+ }
+ }
+
+ err = vmxnet3_activate_dev(adapter);
+ if (err)
+ printk(KERN_ERR "%s: failed to re-activate, error %d."
+ " Closing it\n", netdev->name, err);
+ }
+
+out:
+ clear_bit(VMXNET3_STATE_BIT_RESETTING, &adapter->state);
+ if (err)
+ vmxnet3_force_close(adapter);
+
+ return err;
+}
+
+
+static struct ethtool_ops vmxnet3_ethtool_ops = {
+ .get_settings = vmxnet3_get_settings,
+ .get_drvinfo = vmxnet3_get_drvinfo,
+ .get_regs_len = vmxnet3_get_regs_len,
+ .get_regs = vmxnet3_get_regs,
+ .get_wol = vmxnet3_get_wol,
+ .set_wol = vmxnet3_set_wol,
+ .get_link = ethtool_op_get_link,
+ .get_rx_csum = vmxnet3_get_rx_csum,
+ .set_rx_csum = vmxnet3_set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_hw_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+ .get_strings = vmxnet3_get_strings,
+ .get_flags = vmxnet3_get_flags,
+ .set_flags = vmxnet3_set_flags,
+ .get_sset_count = vmxnet3_get_sset_count,
+ .get_ethtool_stats = vmxnet3_get_ethtool_stats,
+ .get_ringparam = vmxnet3_get_ringparam,
+ .set_ringparam = vmxnet3_set_ringparam,
+};
+
+void vmxnet3_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &vmxnet3_ethtool_ops);
+}
--- /dev/null
+/*
+ * Linux driver for VMware's vmxnet3 ethernet NIC.
+ *
+ * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; version 2 of the License and no later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * The full GNU General Public License is included in this distribution in
+ * the file called "COPYING".
+ *
+ * Maintained by: Shreyas Bhatewara <pv-drivers@vmware.com>
+ *
+ */
+
+#ifndef _VMXNET3_INT_H
+#define _VMXNET3_INT_H
+
+#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/ethtool.h>
+#include <linux/compiler.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/ioport.h>
+#include <linux/highmem.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/uaccess.h>
+#include <asm/dma.h>
+#include <asm/page.h>
+
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/in.h>
+#include <linux/etherdevice.h>
+#include <asm/checksum.h>
+#include <linux/if_vlan.h>
+#include <linux/if_arp.h>
+#include <linux/inetdevice.h>
+
+#include "vmxnet3_defs.h"
+
+#ifdef DEBUG
+# define VMXNET3_DRIVER_VERSION_REPORT VMXNET3_DRIVER_VERSION_STRING"-NAPI(debug)"
+#else
+# define VMXNET3_DRIVER_VERSION_REPORT VMXNET3_DRIVER_VERSION_STRING"-NAPI"
+#endif
+
+
+/*
+ * Version numbers
+ */
+#define VMXNET3_DRIVER_VERSION_STRING "1.0.5.0-k"
+
+/* a 32-bit int, each byte encode a verion number in VMXNET3_DRIVER_VERSION */
+#define VMXNET3_DRIVER_VERSION_NUM 0x01000500
+
+
+/*
+ * Capabilities
+ */
+
+enum {
+ VMNET_CAP_SG = 0x0001, /* Can do scatter-gather transmits. */
+ VMNET_CAP_IP4_CSUM = 0x0002, /* Can checksum only TCP/UDP over
+ * IPv4 */
+ VMNET_CAP_HW_CSUM = 0x0004, /* Can checksum all packets. */
+ VMNET_CAP_HIGH_DMA = 0x0008, /* Can DMA to high memory. */
+ VMNET_CAP_TOE = 0x0010, /* Supports TCP/IP offload. */
+ VMNET_CAP_TSO = 0x0020, /* Supports TCP Segmentation
+ * offload */
+ VMNET_CAP_SW_TSO = 0x0040, /* Supports SW TCP Segmentation */
+ VMNET_CAP_VMXNET_APROM = 0x0080, /* Vmxnet APROM support */
+ VMNET_CAP_HW_TX_VLAN = 0x0100, /* Can we do VLAN tagging in HW */
+ VMNET_CAP_HW_RX_VLAN = 0x0200, /* Can we do VLAN untagging in HW */
+ VMNET_CAP_SW_VLAN = 0x0400, /* VLAN tagging/untagging in SW */
+ VMNET_CAP_WAKE_PCKT_RCV = 0x0800, /* Can wake on network packet recv? */
+ VMNET_CAP_ENABLE_INT_INLINE = 0x1000, /* Enable Interrupt Inline */
+ VMNET_CAP_ENABLE_HEADER_COPY = 0x2000, /* copy header for vmkernel */
+ VMNET_CAP_TX_CHAIN = 0x4000, /* Guest can use multiple tx entries
+ * for a pkt */
+ VMNET_CAP_RX_CHAIN = 0x8000, /* pkt can span multiple rx entries */
+ VMNET_CAP_LPD = 0x10000, /* large pkt delivery */
+ VMNET_CAP_BPF = 0x20000, /* BPF Support in VMXNET Virtual HW*/
+ VMNET_CAP_SG_SPAN_PAGES = 0x40000, /* Scatter-gather can span multiple*/
+ /* pages transmits */
+ VMNET_CAP_IP6_CSUM = 0x80000, /* Can do IPv6 csum offload. */
+ VMNET_CAP_TSO6 = 0x100000, /* TSO seg. offload for IPv6 pkts. */
+ VMNET_CAP_TSO256k = 0x200000, /* Can do TSO seg offload for */
+ /* pkts up to 256kB. */
+ VMNET_CAP_UPT = 0x400000 /* Support UPT */
+};
+
+/*
+ * PCI vendor and device IDs.
+ */
+#define PCI_VENDOR_ID_VMWARE 0x15AD
+#define PCI_DEVICE_ID_VMWARE_VMXNET3 0x07B0
+#define MAX_ETHERNET_CARDS 10
+#define MAX_PCI_PASSTHRU_DEVICE 6
+
+struct vmxnet3_cmd_ring {
+ union Vmxnet3_GenericDesc *base;
+ u32 size;
+ u32 next2fill;
+ u32 next2comp;
+ u8 gen;
+ dma_addr_t basePA;
+};
+
+static inline void
+vmxnet3_cmd_ring_adv_next2fill(struct vmxnet3_cmd_ring *ring)
+{
+ ring->next2fill++;
+ if (unlikely(ring->next2fill == ring->size)) {
+ ring->next2fill = 0;
+ VMXNET3_FLIP_RING_GEN(ring->gen);
+ }
+}
+
+static inline void
+vmxnet3_cmd_ring_adv_next2comp(struct vmxnet3_cmd_ring *ring)
+{
+ VMXNET3_INC_RING_IDX_ONLY(ring->next2comp, ring->size);
+}
+
+static inline int
+vmxnet3_cmd_ring_desc_avail(struct vmxnet3_cmd_ring *ring)
+{
+ return (ring->next2comp > ring->next2fill ? 0 : ring->size) +
+ ring->next2comp - ring->next2fill - 1;
+}
+
+struct vmxnet3_comp_ring {
+ union Vmxnet3_GenericDesc *base;
+ u32 size;
+ u32 next2proc;
+ u8 gen;
+ u8 intr_idx;
+ dma_addr_t basePA;
+};
+
+static inline void
+vmxnet3_comp_ring_adv_next2proc(struct vmxnet3_comp_ring *ring)
+{
+ ring->next2proc++;
+ if (unlikely(ring->next2proc == ring->size)) {
+ ring->next2proc = 0;
+ VMXNET3_FLIP_RING_GEN(ring->gen);
+ }
+}
+
+struct vmxnet3_tx_data_ring {
+ struct Vmxnet3_TxDataDesc *base;
+ u32 size;
+ dma_addr_t basePA;
+};
+
+enum vmxnet3_buf_map_type {
+ VMXNET3_MAP_INVALID = 0,
+ VMXNET3_MAP_NONE,
+ VMXNET3_MAP_SINGLE,
+ VMXNET3_MAP_PAGE,
+};
+
+struct vmxnet3_tx_buf_info {
+ u32 map_type;
+ u16 len;
+ u16 sop_idx;
+ dma_addr_t dma_addr;
+ struct sk_buff *skb;
+};
+
+struct vmxnet3_tq_driver_stats {
+ u64 drop_total; /* # of pkts dropped by the driver, the
+ * counters below track droppings due to
+ * different reasons
+ */
+ u64 drop_too_many_frags;
+ u64 drop_oversized_hdr;
+ u64 drop_hdr_inspect_err;
+ u64 drop_tso;
+
+ u64 tx_ring_full;
+ u64 linearized; /* # of pkts linearized */
+ u64 copy_skb_header; /* # of times we have to copy skb header */
+ u64 oversized_hdr;
+};
+
+struct vmxnet3_tx_ctx {
+ bool ipv4;
+ u16 mss;
+ u32 eth_ip_hdr_size; /* only valid for pkts requesting tso or csum
+ * offloading
+ */
+ u32 l4_hdr_size; /* only valid if mss != 0 */
+ u32 copy_size; /* # of bytes copied into the data ring */
+ union Vmxnet3_GenericDesc *sop_txd;
+ union Vmxnet3_GenericDesc *eop_txd;
+};
+
+struct vmxnet3_tx_queue {
+ spinlock_t tx_lock;
+ struct vmxnet3_cmd_ring tx_ring;
+ struct vmxnet3_tx_buf_info *buf_info;
+ struct vmxnet3_tx_data_ring data_ring;
+ struct vmxnet3_comp_ring comp_ring;
+ struct Vmxnet3_TxQueueCtrl *shared;
+ struct vmxnet3_tq_driver_stats stats;
+ bool stopped;
+ int num_stop; /* # of times the queue is
+ * stopped */
+} __attribute__((__aligned__(SMP_CACHE_BYTES)));
+
+enum vmxnet3_rx_buf_type {
+ VMXNET3_RX_BUF_NONE = 0,
+ VMXNET3_RX_BUF_SKB = 1,
+ VMXNET3_RX_BUF_PAGE = 2
+};
+
+struct vmxnet3_rx_buf_info {
+ enum vmxnet3_rx_buf_type buf_type;
+ u16 len;
+ union {
+ struct sk_buff *skb;
+ struct page *page;
+ };
+ dma_addr_t dma_addr;
+};
+
+struct vmxnet3_rx_ctx {
+ struct sk_buff *skb;
+ u32 sop_idx;
+};
+
+struct vmxnet3_rq_driver_stats {
+ u64 drop_total;
+ u64 drop_err;
+ u64 drop_fcs;
+ u64 rx_buf_alloc_failure;
+};
+
+struct vmxnet3_rx_queue {
+ struct vmxnet3_cmd_ring rx_ring[2];
+ struct vmxnet3_comp_ring comp_ring;
+ struct vmxnet3_rx_ctx rx_ctx;
+ u32 qid; /* rqID in RCD for buffer from 1st ring */
+ u32 qid2; /* rqID in RCD for buffer from 2nd ring */
+ u32 uncommitted[2]; /* # of buffers allocated since last RXPROD
+ * update */
+ struct vmxnet3_rx_buf_info *buf_info[2];
+ struct Vmxnet3_RxQueueCtrl *shared;
+ struct vmxnet3_rq_driver_stats stats;
+} __attribute__((__aligned__(SMP_CACHE_BYTES)));
+
+#define VMXNET3_LINUX_MAX_MSIX_VECT 1
+
+struct vmxnet3_intr {
+ enum vmxnet3_intr_mask_mode mask_mode;
+ enum vmxnet3_intr_type type; /* MSI-X, MSI, or INTx? */
+ u8 num_intrs; /* # of intr vectors */
+ u8 event_intr_idx; /* idx of the intr vector for event */
+ u8 mod_levels[VMXNET3_LINUX_MAX_MSIX_VECT]; /* moderation level */
+#ifdef CONFIG_PCI_MSI
+ struct msix_entry msix_entries[VMXNET3_LINUX_MAX_MSIX_VECT];
+#endif
+};
+
+#define VMXNET3_STATE_BIT_RESETTING 0
+#define VMXNET3_STATE_BIT_QUIESCED 1
+struct vmxnet3_adapter {
+ struct vmxnet3_tx_queue tx_queue;
+ struct vmxnet3_rx_queue rx_queue;
+ struct napi_struct napi;
+ struct vlan_group *vlan_grp;
+
+ struct vmxnet3_intr intr;
+
+ struct Vmxnet3_DriverShared *shared;
+ struct Vmxnet3_PMConf *pm_conf;
+ struct Vmxnet3_TxQueueDesc *tqd_start; /* first tx queue desc */
+ struct Vmxnet3_RxQueueDesc *rqd_start; /* first rx queue desc */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ u8 *hw_addr0; /* for BAR 0 */
+ u8 *hw_addr1; /* for BAR 1 */
+
+ /* feature control */
+ bool rxcsum;
+ bool lro;
+ bool jumbo_frame;
+
+ /* rx buffer related */
+ unsigned skb_buf_size;
+ int rx_buf_per_pkt; /* only apply to the 1st ring */
+ dma_addr_t shared_pa;
+ dma_addr_t queue_desc_pa;
+
+ /* Wake-on-LAN */
+ u32 wol;
+
+ /* Link speed */
+ u32 link_speed; /* in mbps */
+
+ u64 tx_timeout_count;
+ struct work_struct work;
+
+ unsigned long state; /* VMXNET3_STATE_BIT_xxx */
+
+ int dev_number;
+};
+
+#define VMXNET3_WRITE_BAR0_REG(adapter, reg, val) \
+ writel((val), (adapter)->hw_addr0 + (reg))
+#define VMXNET3_READ_BAR0_REG(adapter, reg) \
+ readl((adapter)->hw_addr0 + (reg))
+
+#define VMXNET3_WRITE_BAR1_REG(adapter, reg, val) \
+ writel((val), (adapter)->hw_addr1 + (reg))
+#define VMXNET3_READ_BAR1_REG(adapter, reg) \
+ readl((adapter)->hw_addr1 + (reg))
+
+#define VMXNET3_WAKE_QUEUE_THRESHOLD(tq) (5)
+#define VMXNET3_RX_ALLOC_THRESHOLD(rq, ring_idx, adapter) \
+ ((rq)->rx_ring[ring_idx].size >> 3)
+
+#define VMXNET3_GET_ADDR_LO(dma) ((u32)(dma))
+#define VMXNET3_GET_ADDR_HI(dma) ((u32)(((u64)(dma)) >> 32))
+
+/* must be a multiple of VMXNET3_RING_SIZE_ALIGN */
+#define VMXNET3_DEF_TX_RING_SIZE 512
+#define VMXNET3_DEF_RX_RING_SIZE 256
+
+#define VMXNET3_MAX_ETH_HDR_SIZE 22
+#define VMXNET3_MAX_SKB_BUF_SIZE (3*1024)
+
+int
+vmxnet3_quiesce_dev(struct vmxnet3_adapter *adapter);
+
+int
+vmxnet3_activate_dev(struct vmxnet3_adapter *adapter);
+
+void
+vmxnet3_force_close(struct vmxnet3_adapter *adapter);
+
+void
+vmxnet3_reset_dev(struct vmxnet3_adapter *adapter);
+
+void
+vmxnet3_tq_destroy(struct vmxnet3_tx_queue *tq,
+ struct vmxnet3_adapter *adapter);
+
+void
+vmxnet3_rq_destroy(struct vmxnet3_rx_queue *rq,
+ struct vmxnet3_adapter *adapter);
+
+int
+vmxnet3_create_queues(struct vmxnet3_adapter *adapter,
+ u32 tx_ring_size, u32 rx_ring_size, u32 rx_ring2_size);
+
+extern void vmxnet3_set_ethtool_ops(struct net_device *netdev);
+extern struct net_device_stats *vmxnet3_get_stats(struct net_device *netdev);
+
+extern char vmxnet3_driver_name[];
+#endif
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/capability.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/fs.h>
#include <linux/kernel.h> /* printk(), and other useful stuff */
#include <linux/module.h>
#include <linux/string.h> /* inline memset(), etc. */
+#include <linux/sched.h>
#include <linux/slab.h> /* kmalloc(), kfree() */
#include <linux/stddef.h> /* offsetof(), etc. */
#include <linux/wanrouter.h> /* WAN router definitions */
*/
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/kernel.h>
#include <linux/version.h>
#include <linux/pci.h>
+#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/if.h>
spinlock_t lock;
unsigned long last_poll;
int up;
- int request_sent;
- u32 txseq; /* TX sequence number */
+ u32 txseq; /* TX sequence number, 0 = none */
u32 rxseq; /* RX sequence number */
};
struct cisco_packet *cisco_data;
struct in_device *in_dev;
__be32 addr, mask;
+ u32 ack;
if (skb->len < sizeof(struct hdlc_header))
goto rx_error;
case CISCO_KEEPALIVE_REQ:
spin_lock(&st->lock);
st->rxseq = ntohl(cisco_data->par1);
- if (st->request_sent &&
- ntohl(cisco_data->par2) == st->txseq) {
+ ack = ntohl(cisco_data->par2);
+ if (ack && (ack == st->txseq ||
+ /* our current REQ may be in transit */
+ ack == st->txseq - 1)) {
st->last_poll = jiffies;
if (!st->up) {
u32 sec, min, hrs, days;
cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq),
htonl(st->rxseq));
- st->request_sent = 1;
spin_unlock(&st->lock);
st->timer.expires = jiffies + st->settings.interval * HZ;
unsigned long flags;
spin_lock_irqsave(&st->lock, flags);
- st->up = 0;
- st->request_sent = 0;
- st->txseq = st->rxseq = 0;
+ st->up = st->txseq = st->rxseq = 0;
spin_unlock_irqrestore(&st->lock, flags);
init_timer(&st->timer);
spin_lock_irqsave(&st->lock, flags);
netif_dormant_on(dev);
- st->up = 0;
- st->request_sent = 0;
+ st->up = st->txseq = 0;
spin_unlock_irqrestore(&st->lock, flags);
}
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/capability.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/capability.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/fcntl.h>
---help---
Say Y if you have a Metricom radio and intend to use Starmode Radio
IP. STRIP is a radio protocol developed for the MosquitoNet project
- (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
- traffic using Metricom radios. Metricom radios are small, battery
- powered, 100kbit/sec packet radio transceivers, about the size and
- weight of a cellular telephone. (You may also have heard them called
- "Metricom modems" but we avoid the term "modem" because it misleads
- many people into thinking that you can plug a Metricom modem into a
- phone line and use it as a modem.)
+ to send Internet traffic using Metricom radios. Metricom radios are
+ small, battery powered, 100kbit/sec packet radio transceivers, about
+ the size and weight of a cellular telephone. (You may also have heard
+ them called "Metricom modems" but we avoid the term "modem" because
+ it misleads many people into thinking that you can plug a Metricom
+ modem into a phone line and use it as a modem.)
You can use STRIP on any Linux machine with a serial port, although
it is obviously most useful for people with laptop computers. If you
#define ADM8211_SYNCTL_CS1 (1 << 28)
#define ADM8211_SYNCTL_CAL (1 << 27)
#define ADM8211_SYNCTL_SELCAL (1 << 26)
-#define ADM8211_SYNCTL_RFtype ((1 << 24) || (1 << 23) || (1 << 22))
+#define ADM8211_SYNCTL_RFtype ((1 << 24) | (1 << 23) | (1 << 22))
#define ADM8211_SYNCTL_RFMD (1 << 22)
#define ADM8211_SYNCTL_GENERAL (0x7 << 22)
/* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */
static int get_dec_u16( char *buffer, int *start, int limit ) {
u16 value;
int valid = 0;
- for( value = 0; buffer[*start] >= '0' &&
- buffer[*start] <= '9' &&
- *start < limit; (*start)++ ) {
+ for (value = 0; *start < limit && buffer[*start] >= '0' &&
+ buffer[*start] <= '9'; (*start)++) {
valid = 1;
value *= 10;
value += buffer[*start] - '0';
static char arlan_drive_info[ARLAN_STR_SIZE] = "A655\n\0";
-static int arlan_sysctl_info(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_info(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
*lenp = pos;
if (!write)
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
else
{
*lenp = 0;
}
-static int arlan_sysctl_info161719(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_info161719(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
final:
*lenp = pos;
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
return retv;
}
-static int arlan_sysctl_infotxRing(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_infotxRing(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
SARLBNpln(u_char, txBuffer, 0x800);
final:
*lenp = pos;
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
return retv;
}
-static int arlan_sysctl_inforxRing(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_inforxRing(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
SARLBNpln(u_char, rxBuffer, 0x800);
final:
*lenp = pos;
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
return retv;
}
-static int arlan_sysctl_info18(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_info18(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int i;
final:
*lenp = pos;
- retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ retv = proc_dostring(ctl, write, buffer, lenp, ppos);
return retv;
}
static char conf_reset_result[200];
-static int arlan_configure(ctl_table * ctl, int write, struct file *filp,
+static int arlan_configure(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int pos = 0;
return -1;
*lenp = pos;
- return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return proc_dostring(ctl, write, buffer, lenp, ppos);
}
-static int arlan_sysctl_reset(ctl_table * ctl, int write, struct file *filp,
+static int arlan_sysctl_reset(ctl_table * ctl, int write,
void __user *buffer, size_t * lenp, loff_t *ppos)
{
int pos = 0;
} else
return -1;
*lenp = pos + 3;
- return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return proc_dostring(ctl, write, buffer, lenp, ppos);
}
u8 vpds[2][AR5416_PD_GAIN_ICEPTS];
u8 pwrs[2][AR5416_PD_GAIN_ICEPTS];
int chain, idx, i;
- u8 f;
+ u32 phy_data = 0;
+ u8 f, tmp;
switch (channel->band) {
case IEEE80211_BAND_2GHZ:
}
for (i = 0; i < 76; i++) {
- u32 phy_data;
- u8 tmp;
-
if (i < 25) {
tmp = ar9170_interpolate_val(i, &pwrs[0][0],
&vpds[0][0]);
{ USB_DEVICE(0x0cf3, 0x9170) },
/* Atheros TG121N */
{ USB_DEVICE(0x0cf3, 0x1001) },
+ /* TP-Link TL-WN821N v2 */
+ { USB_DEVICE(0x0cf3, 0x1002) },
/* Cace Airpcap NX */
{ USB_DEVICE(0xcace, 0x0300) },
/* D-Link DWA 160A */
AR_PHY_CH1_EXT_CCA,
AR_PHY_CH2_EXT_CCA
};
- u8 chainmask;
+ u8 chainmask, rx_chain_status;
+ rx_chain_status = REG_READ(ah, AR_PHY_RX_CHAINMASK);
if (AR_SREV_9285(ah))
chainmask = 0x9;
- else if (AR_SREV_9280(ah) || AR_SREV_9287(ah))
- chainmask = 0x1B;
- else
- chainmask = 0x3F;
+ else if (AR_SREV_9280(ah) || AR_SREV_9287(ah)) {
+ if ((rx_chain_status & 0x2) || (rx_chain_status & 0x4))
+ chainmask = 0x1B;
+ else
+ chainmask = 0x09;
+ } else {
+ if (rx_chain_status & 0x4)
+ chainmask = 0x3F;
+ else if (rx_chain_status & 0x2)
+ chainmask = 0x1B;
+ else
+ chainmask = 0x09;
+ }
h = ah->nfCalHist;
noise_floor = AR_PHY_CCA_MAX_AR9280_GOOD_VALUE;
else if (AR_SREV_9285(ah))
noise_floor = AR_PHY_CCA_MAX_AR9285_GOOD_VALUE;
+ else if (AR_SREV_9287(ah))
+ noise_floor = AR_PHY_CCA_MAX_AR9287_GOOD_VALUE;
else
noise_floor = AR_PHY_CCA_MAX_AR5416_GOOD_VALUE;
regVal |= (1 << (19 + i));
REG_WRITE(ah, 0x7834, regVal);
udelay(1);
+ regVal = REG_READ(ah, 0x7834);
regVal &= (~(0x1 << (19 + i)));
reg_field = MS(REG_READ(ah, 0x7840), AR9285_AN_RXTXBB1_SPARE9);
regVal |= (reg_field << (19 + i));
#define AR_PHY_CCA_MAX_AR5416_GOOD_VALUE -85
#define AR_PHY_CCA_MAX_AR9280_GOOD_VALUE -112
#define AR_PHY_CCA_MAX_AR9285_GOOD_VALUE -118
+#define AR_PHY_CCA_MAX_AR9287_GOOD_VALUE -118
#define AR_PHY_CCA_MAX_HIGH_VALUE -62
#define AR_PHY_CCA_MIN_BAD_VALUE -140
#define AR_PHY_CCA_FILTERWINDOW_LENGTH_INIT 3
REG_RMW_FIELD(ah, AR_AN_TOP1, AR_AN_TOP1_DACIPMODE,
eep->baseEepHeader.dacLpMode);
+ udelay(100);
+
REG_RMW_FIELD(ah, AR_PHY_FRAME_CTL, AR_PHY_FRAME_CTL_TX_CLIP,
pModal->miscBits >> 2);
u16 powerLimit)
{
#define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */
-#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 10 /* 10*log10(3)*2 */
+#define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */
struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
static void ath9k_hw_init_mode_gain_regs(struct ath_hw *ah)
{
- if (AR_SREV_9287_11(ah))
+ if (AR_SREV_9287_11_OR_LATER(ah))
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9287Modes_rx_gain_9287_1_1,
ARRAY_SIZE(ar9287Modes_rx_gain_9287_1_1), 6);
else if (AR_SREV_9280_20(ah))
ath9k_hw_init_rxgain_ini(ah);
- if (AR_SREV_9287_11(ah)) {
+ if (AR_SREV_9287_11_OR_LATER(ah)) {
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9287Modes_tx_gain_9287_1_1,
ARRAY_SIZE(ar9287Modes_tx_gain_9287_1_1), 6);
ath9k_hw_init_mode_regs(ah);
if (ah->is_pciexpress)
- ath9k_hw_configpcipowersave(ah, 0);
+ ath9k_hw_configpcipowersave(ah, 0, 0);
else
ath9k_hw_disablepcie(ah);
*/
REG_SET_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
+ if (AR_SREV_9280_10_OR_LATER(ah)) {
+ val = REG_READ(ah, AR_PCU_MISC_MODE2) &
+ (~AR_PCU_MISC_MODE2_HWWAR1);
+
+ if (AR_SREV_9287_10_OR_LATER(ah))
+ val = val & (~AR_PCU_MISC_MODE2_HWWAR2);
+
+ REG_WRITE(ah, AR_PCU_MISC_MODE2, val);
+ }
if (!AR_SREV_5416_20_OR_LATER(ah) ||
AR_SREV_9280_10_OR_LATER(ah))
static bool ath9k_hw_chip_reset(struct ath_hw *ah,
struct ath9k_channel *chan)
{
- if (OLC_FOR_AR9280_20_LATER) {
+ if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL)) {
if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON))
return false;
} else if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM))
struct ath9k_channel *curchan = ah->curchan;
u32 saveDefAntenna;
u32 macStaId1;
+ u64 tsf = 0;
int i, rx_chainmask, r;
ah->extprotspacing = sc->ht_extprotspacing;
if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
return -EIO;
- if (curchan)
+ if (curchan && !ah->chip_fullsleep)
ath9k_hw_getnf(ah, curchan);
if (bChannelChange &&
(chan->channel != ah->curchan->channel) &&
((chan->channelFlags & CHANNEL_ALL) ==
(ah->curchan->channelFlags & CHANNEL_ALL)) &&
- (!AR_SREV_9280(ah) || (!IS_CHAN_A_5MHZ_SPACED(chan) &&
- !IS_CHAN_A_5MHZ_SPACED(ah->curchan)))) {
+ !(AR_SREV_9280(ah) || IS_CHAN_A_5MHZ_SPACED(chan) ||
+ IS_CHAN_A_5MHZ_SPACED(ah->curchan))) {
if (ath9k_hw_channel_change(ah, chan, sc->tx_chan_width)) {
ath9k_hw_loadnf(ah, ah->curchan);
macStaId1 = REG_READ(ah, AR_STA_ID1) & AR_STA_ID1_BASE_RATE_11B;
+ /* For chips on which RTC reset is done, save TSF before it gets cleared */
+ if (AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ tsf = ath9k_hw_gettsf64(ah);
+
saveLedState = REG_READ(ah, AR_CFG_LED) &
(AR_CFG_LED_ASSOC_CTL | AR_CFG_LED_MODE_SEL |
AR_CFG_LED_BLINK_THRESH_SEL | AR_CFG_LED_BLINK_SLOW);
udelay(50);
}
+ /* Restore TSF */
+ if (tsf && AR_SREV_9280(ah) && ah->eep_ops->get_eeprom(ah, EEP_OL_PWRCTRL))
+ ath9k_hw_settsf64(ah, tsf);
+
if (AR_SREV_9280_10_OR_LATER(ah))
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL, AR_GPIO_JTAG_DISABLE);
* Programming the SerDes must go through the same 288 bit serial shift
* register as the other analog registers. Hence the 9 writes.
*/
-void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore)
+void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off)
{
u8 i;
+ u32 val;
if (ah->is_pciexpress != true)
return;
return;
/* Nothing to do on restore for 11N */
- if (restore)
- return;
+ if (!restore) {
+ if (AR_SREV_9280_20_OR_LATER(ah)) {
+ /*
+ * AR9280 2.0 or later chips use SerDes values from the
+ * initvals.h initialized depending on chipset during
+ * ath9k_hw_init()
+ */
+ for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
+ REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
+ INI_RA(&ah->iniPcieSerdes, i, 1));
+ }
+ } else if (AR_SREV_9280(ah) &&
+ (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+
+ /* RX shut off when elecidle is asserted */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+
+ /* Shut off CLKREQ active in L1 */
+ if (ah->config.pcie_clock_req)
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
+ else
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
- if (AR_SREV_9280_20_OR_LATER(ah)) {
- /*
- * AR9280 2.0 or later chips use SerDes values from the
- * initvals.h initialized depending on chipset during
- * ath9k_hw_init()
- */
- for (i = 0; i < ah->iniPcieSerdes.ia_rows; i++) {
- REG_WRITE(ah, INI_RA(&ah->iniPcieSerdes, i, 0),
- INI_RA(&ah->iniPcieSerdes, i, 1));
- }
- } else if (AR_SREV_9280(ah) &&
- (ah->hw_version.macRev == AR_SREV_REVISION_9280_10)) {
- REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fd00);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
- /* RX shut off when elecidle is asserted */
- REG_WRITE(ah, AR_PCIE_SERDES, 0xa8000019);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x13160820);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980560);
+ /* Load the new settings */
+ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
- /* Shut off CLKREQ active in L1 */
- if (ah->config.pcie_clock_req)
- REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffc);
- else
- REG_WRITE(ah, AR_PCIE_SERDES, 0x401deffd);
-
- REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x00043007);
+ } else {
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
- /* Load the new settings */
- REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+ /* RX shut off when elecidle is asserted */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
- } else {
- REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924);
+ /*
+ * Ignore ah->ah_config.pcie_clock_req setting for
+ * pre-AR9280 11n
+ */
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
- /* RX shut off when elecidle is asserted */
- REG_WRITE(ah, AR_PCIE_SERDES, 0x28000039);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x53160824);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xe5980579);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
+ REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
- /*
- * Ignore ah->ah_config.pcie_clock_req setting for
- * pre-AR9280 11n
- */
- REG_WRITE(ah, AR_PCIE_SERDES, 0x001defff);
+ /* Load the new settings */
+ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
+ }
- REG_WRITE(ah, AR_PCIE_SERDES, 0x1aaabe40);
- REG_WRITE(ah, AR_PCIE_SERDES, 0xbe105554);
- REG_WRITE(ah, AR_PCIE_SERDES, 0x000e3007);
+ udelay(1000);
- /* Load the new settings */
- REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000);
- }
+ /* set bit 19 to allow forcing of pcie core into L1 state */
+ REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
- udelay(1000);
+ /* Several PCIe massages to ensure proper behaviour */
+ if (ah->config.pcie_waen) {
+ val = ah->config.pcie_waen;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else {
+ if (AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) {
+ val = AR9285_WA_DEFAULT;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else if (AR_SREV_9280(ah)) {
+ /*
+ * On AR9280 chips bit 22 of 0x4004 needs to be
+ * set otherwise card may disappear.
+ */
+ val = AR9280_WA_DEFAULT;
+ if (!power_off)
+ val &= (~AR_WA_D3_L1_DISABLE);
+ } else
+ val = AR_WA_DEFAULT;
+ }
- /* set bit 19 to allow forcing of pcie core into L1 state */
- REG_SET_BIT(ah, AR_PCIE_PM_CTRL, AR_PCIE_PM_CTRL_ENA);
+ REG_WRITE(ah, AR_WA, val);
+ }
- /* Several PCIe massages to ensure proper behaviour */
- if (ah->config.pcie_waen) {
- REG_WRITE(ah, AR_WA, ah->config.pcie_waen);
- } else {
- if (AR_SREV_9285(ah) || AR_SREV_9271(ah) || AR_SREV_9287(ah))
- REG_WRITE(ah, AR_WA, AR9285_WA_DEFAULT);
+ if (power_off) {
/*
- * On AR9280 chips bit 22 of 0x4004 needs to be set to
- * otherwise card may disappear.
+ * Set PCIe workaround bits
+ * bit 14 in WA register (disable L1) should only
+ * be set when device enters D3 and be cleared
+ * when device comes back to D0.
*/
- else if (AR_SREV_9280(ah))
- REG_WRITE(ah, AR_WA, AR9280_WA_DEFAULT);
- else
- REG_WRITE(ah, AR_WA, AR_WA_DEFAULT);
+ if (ah->config.pcie_waen) {
+ if (ah->config.pcie_waen & AR_WA_D3_L1_DISABLE)
+ REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
+ } else {
+ if (((AR_SREV_9285(ah) || AR_SREV_9271(ah) ||
+ AR_SREV_9287(ah)) &&
+ (AR9285_WA_DEFAULT & AR_WA_D3_L1_DISABLE)) ||
+ (AR_SREV_9280(ah) &&
+ (AR9280_WA_DEFAULT & AR_WA_D3_L1_DISABLE))) {
+ REG_SET_BIT(ah, AR_WA, AR_WA_D3_L1_DISABLE);
+ }
+ }
}
}
}
#endif
- if ((ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCI) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_5416_PCIE) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9160) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9100) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9280) ||
- (ah->hw_version.macVersion == AR_SREV_VERSION_9285))
- pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
- else
- pCap->hw_caps |= ATH9K_HW_CAP_AUTOSLEEP;
+ pCap->hw_caps &= ~ATH9K_HW_CAP_AUTOSLEEP;
if (AR_SREV_9280(ah) || AR_SREV_9285(ah))
pCap->hw_caps &= ~ATH9K_HW_CAP_4KB_SPLITTRANS;
#define AH_TSF_WRITE_TIMEOUT 100 /* (us) */
#define AH_TIME_QUANTUM 10
#define AR_KEYTABLE_SIZE 128
-#define POWER_UP_TIME 200000
+#define POWER_UP_TIME 10000
#define SPUR_RSSI_THRESH 40
#define CAB_TIMEOUT_VAL 10
const struct ath9k_beacon_state *bs);
bool ath9k_hw_setpower(struct ath_hw *ah,
enum ath9k_power_mode mode);
-void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore);
+void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off);
/* Interrupt Handling */
bool ath9k_hw_intrpend(struct ath_hw *ah);
int r;
ath9k_ps_wakeup(sc);
- ath9k_hw_configpcipowersave(ah, 0);
+ ath9k_hw_configpcipowersave(ah, 0, 0);
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);
spin_unlock_bh(&sc->sc_resetlock);
ath9k_hw_phy_disable(ah);
- ath9k_hw_configpcipowersave(ah, 1);
+ ath9k_hw_configpcipowersave(ah, 1, 1);
ath9k_ps_restore(sc);
ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
}
bool blocked = !!ath_is_rfkill_set(sc);
wiphy_rfkill_set_hw_state(hw->wiphy, blocked);
-
- if (blocked)
- ath_radio_disable(sc);
- else
- ath_radio_enable(sc);
}
static void ath_start_rfkill_poll(struct ath_softc *sc)
DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
ath_deinit_leds(sc);
+ wiphy_rfkill_stop_polling(sc->hw->wiphy);
for (i = 0; i < sc->num_sec_wiphy; i++) {
struct ath_wiphy *aphy = sc->sec_wiphy[i];
init_channel = ath_get_curchannel(sc, hw);
/* Reset SERDES registers */
- ath9k_hw_configpcipowersave(sc->sc_ah, 0);
+ ath9k_hw_configpcipowersave(sc->sc_ah, 0, 0);
/*
* The basic interface to setting the hardware in a good
} else
sc->rx.rxlink = NULL;
- wiphy_rfkill_stop_polling(sc->hw->wiphy);
-
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(sc->sc_ah);
- ath9k_hw_configpcipowersave(sc->sc_ah, 1);
+ ath9k_hw_configpcipowersave(sc->sc_ah, 1, 1);
ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
sc->sc_flags |= SC_OP_INVALID;
return rate;
if (rate_table->info[rate].valid_single_stream &&
- !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG));
+ !(ath_rc_priv->ht_cap & WLAN_RC_DS_FLAG))
return rate;
/* This should not happen */
#define AR_RC_HOSTIF 0x00000100
#define AR_WA 0x4004
+#define AR_WA_D3_L1_DISABLE (1 << 14)
#define AR9285_WA_DEFAULT 0x004a05cb
-#define AR9280_WA_DEFAULT 0x0040073f
+#define AR9280_WA_DEFAULT 0x0040073b
#define AR_WA_DEFAULT 0x0000073f
If unsure, say N.
+config B43_SDIO
+ bool "Broadcom 43xx SDIO device support (EXPERIMENTAL)"
+ depends on B43 && SSB_SDIOHOST_POSSIBLE && EXPERIMENTAL
+ select SSB_SDIOHOST
+ ---help---
+ Broadcom 43xx device support for Soft-MAC SDIO devices.
+
+ With this config option you can drive Soft-MAC b43 cards with a
+ Secure Digital I/O interface.
+ This includes the WLAN daughter card found on the Nintendo Wii
+ video game console.
+ Note that this does not support Broadcom 43xx Full-MAC devices.
+
+ It's safe to select Y here, even if you don't have a B43 SDIO device.
+
+ If unsure, say N.
+
# Data transfers to the device via PIO
-# This is only needed on PCMCIA devices. All others can do DMA properly.
+# This is only needed on PCMCIA and SDIO devices. All others can do DMA properly.
config B43_PIO
bool
- depends on B43 && (B43_PCMCIA || B43_FORCE_PIO)
+ depends on B43 && (B43_SDIO || B43_PCMCIA || B43_FORCE_PIO)
select SSB_BLOCKIO
default y
b43-y += rfkill.o
b43-$(CONFIG_B43_LEDS) += leds.o
b43-$(CONFIG_B43_PCMCIA) += pcmcia.o
+b43-$(CONFIG_B43_SDIO) += sdio.o
b43-$(CONFIG_B43_DEBUG) += debugfs.o
obj-$(CONFIG_B43) += b43.o
struct ieee80211_tx_queue_params p;
};
-struct b43_wldev;
-
-/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
-struct b43_wl {
- /* Pointer to the active wireless device on this chip */
- struct b43_wldev *current_dev;
- /* Pointer to the ieee80211 hardware data structure */
- struct ieee80211_hw *hw;
-
- /* Global driver mutex. Every operation must run with this mutex locked. */
- struct mutex mutex;
- /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
- * handler, only. This basically is just the IRQ mask register. */
- spinlock_t hardirq_lock;
-
- /* The number of queues that were registered with the mac80211 subsystem
- * initially. This is a backup copy of hw->queues in case hw->queues has
- * to be dynamically lowered at runtime (Firmware does not support QoS).
- * hw->queues has to be restored to the original value before unregistering
- * from the mac80211 subsystem. */
- u16 mac80211_initially_registered_queues;
-
- /* R/W lock for data transmission.
- * Transmissions on 2+ queues can run concurrently, but somebody else
- * might sync with TX by write_lock_irqsave()'ing. */
- rwlock_t tx_lock;
- /* Lock for LEDs access. */
- spinlock_t leds_lock;
-
- /* We can only have one operating interface (802.11 core)
- * at a time. General information about this interface follows.
- */
-
- struct ieee80211_vif *vif;
- /* The MAC address of the operating interface. */
- u8 mac_addr[ETH_ALEN];
- /* Current BSSID */
- u8 bssid[ETH_ALEN];
- /* Interface type. (NL80211_IFTYPE_XXX) */
- int if_type;
- /* Is the card operating in AP, STA or IBSS mode? */
- bool operating;
- /* filter flags */
- unsigned int filter_flags;
- /* Stats about the wireless interface */
- struct ieee80211_low_level_stats ieee_stats;
-
-#ifdef CONFIG_B43_HWRNG
- struct hwrng rng;
- bool rng_initialized;
- char rng_name[30 + 1];
-#endif /* CONFIG_B43_HWRNG */
-
- /* List of all wireless devices on this chip */
- struct list_head devlist;
- u8 nr_devs;
-
- bool radiotap_enabled;
- bool radio_enabled;
-
- /* The beacon we are currently using (AP or IBSS mode). */
- struct sk_buff *current_beacon;
- bool beacon0_uploaded;
- bool beacon1_uploaded;
- bool beacon_templates_virgin; /* Never wrote the templates? */
- struct work_struct beacon_update_trigger;
-
- /* The current QOS parameters for the 4 queues. */
- struct b43_qos_params qos_params[4];
-
- /* Work for adjustment of the transmission power.
- * This is scheduled when we determine that the actual TX output
- * power doesn't match what we want. */
- struct work_struct txpower_adjust_work;
-
- /* Packet transmit work */
- struct work_struct tx_work;
- /* Queue of packets to be transmitted. */
- struct sk_buff_head tx_queue;
-};
+struct b43_wl;
/* The type of the firmware file. */
enum b43_firmware_file_type {
/* The device initialization status.
* Use b43_status() to query. */
atomic_t __init_status;
- /* Saved init status for handling suspend. */
- int suspend_init_status;
bool bad_frames_preempt; /* Use "Bad Frames Preemption" (default off) */
bool dfq_valid; /* Directed frame queue valid (IBSS PS mode, ATIM) */
bool radio_hw_enable; /* saved state of radio hardware enabled state */
- bool suspend_in_progress; /* TRUE, if we are in a suspend/resume cycle */
bool qos_enabled; /* TRUE, if QoS is used. */
bool hwcrypto_enabled; /* TRUE, if HW crypto acceleration is enabled. */
/* Various statistics about the physical device. */
struct b43_stats stats;
- /* The device LEDs. */
- struct b43_led led_tx;
- struct b43_led led_rx;
- struct b43_led led_assoc;
- struct b43_led led_radio;
-
/* Reason code of the last interrupt. */
u32 irq_reason;
u32 dma_reason[6];
/* Debugging stuff follows. */
#ifdef CONFIG_B43_DEBUG
struct b43_dfsentry *dfsentry;
+ unsigned int irq_count;
+ unsigned int irq_bit_count[32];
+ unsigned int tx_count;
+ unsigned int rx_count;
#endif
};
+/*
+ * Include goes here to avoid a dependency problem.
+ * A better fix would be to integrate xmit.h into b43.h.
+ */
+#include "xmit.h"
+
+/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
+struct b43_wl {
+ /* Pointer to the active wireless device on this chip */
+ struct b43_wldev *current_dev;
+ /* Pointer to the ieee80211 hardware data structure */
+ struct ieee80211_hw *hw;
+
+ /* Global driver mutex. Every operation must run with this mutex locked. */
+ struct mutex mutex;
+ /* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
+ * handler, only. This basically is just the IRQ mask register. */
+ spinlock_t hardirq_lock;
+
+ /* The number of queues that were registered with the mac80211 subsystem
+ * initially. This is a backup copy of hw->queues in case hw->queues has
+ * to be dynamically lowered at runtime (Firmware does not support QoS).
+ * hw->queues has to be restored to the original value before unregistering
+ * from the mac80211 subsystem. */
+ u16 mac80211_initially_registered_queues;
+
+ /* We can only have one operating interface (802.11 core)
+ * at a time. General information about this interface follows.
+ */
+
+ struct ieee80211_vif *vif;
+ /* The MAC address of the operating interface. */
+ u8 mac_addr[ETH_ALEN];
+ /* Current BSSID */
+ u8 bssid[ETH_ALEN];
+ /* Interface type. (NL80211_IFTYPE_XXX) */
+ int if_type;
+ /* Is the card operating in AP, STA or IBSS mode? */
+ bool operating;
+ /* filter flags */
+ unsigned int filter_flags;
+ /* Stats about the wireless interface */
+ struct ieee80211_low_level_stats ieee_stats;
+
+#ifdef CONFIG_B43_HWRNG
+ struct hwrng rng;
+ bool rng_initialized;
+ char rng_name[30 + 1];
+#endif /* CONFIG_B43_HWRNG */
+
+ /* List of all wireless devices on this chip */
+ struct list_head devlist;
+ u8 nr_devs;
+
+ bool radiotap_enabled;
+ bool radio_enabled;
+
+ /* The beacon we are currently using (AP or IBSS mode). */
+ struct sk_buff *current_beacon;
+ bool beacon0_uploaded;
+ bool beacon1_uploaded;
+ bool beacon_templates_virgin; /* Never wrote the templates? */
+ struct work_struct beacon_update_trigger;
+
+ /* The current QOS parameters for the 4 queues. */
+ struct b43_qos_params qos_params[4];
+
+ /* Work for adjustment of the transmission power.
+ * This is scheduled when we determine that the actual TX output
+ * power doesn't match what we want. */
+ struct work_struct txpower_adjust_work;
+
+ /* Packet transmit work */
+ struct work_struct tx_work;
+ /* Queue of packets to be transmitted. */
+ struct sk_buff_head tx_queue;
+
+ /* The device LEDs. */
+ struct b43_leds leds;
+
+#ifdef CONFIG_B43_PIO
+ /*
+ * RX/TX header/tail buffers used by the frame transmit functions.
+ */
+ struct b43_rxhdr_fw4 rxhdr;
+ struct b43_txhdr txhdr;
+ u8 rx_tail[4];
+ u8 tx_tail[4];
+#endif /* CONFIG_B43_PIO */
+};
+
static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
{
return hw->priv;
add_dyn_dbg("debug_lo", B43_DBG_LO, 0);
add_dyn_dbg("debug_firmware", B43_DBG_FIRMWARE, 0);
add_dyn_dbg("debug_keys", B43_DBG_KEYS, 0);
+ add_dyn_dbg("debug_verbose_stats", B43_DBG_VERBOSESTATS, 0);
#undef add_dyn_dbg
}
B43_DBG_LO,
B43_DBG_FIRMWARE,
B43_DBG_KEYS,
+ B43_DBG_VERBOSESTATS,
__B43_NR_DYNDBG,
};
}
static int dma_tx_fragment(struct b43_dmaring *ring,
- struct sk_buff *skb)
+ struct sk_buff **in_skb)
{
+ struct sk_buff *skb = *in_skb;
const struct b43_dma_ops *ops = ring->ops;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
u8 *header;
}
memcpy(skb_put(bounce_skb, skb->len), skb->data, skb->len);
+ memcpy(bounce_skb->cb, skb->cb, sizeof(skb->cb));
+ bounce_skb->dev = skb->dev;
+ skb_set_queue_mapping(bounce_skb, skb_get_queue_mapping(skb));
+ info = IEEE80211_SKB_CB(bounce_skb);
+
dev_kfree_skb_any(skb);
skb = bounce_skb;
+ *in_skb = bounce_skb;
meta->skb = skb;
meta->dmaaddr = map_descbuffer(ring, skb->data, skb->len, 1);
if (b43_dma_mapping_error(ring, meta->dmaaddr, skb->len, 1)) {
* static, so we don't need to store it per frame. */
ring->queue_prio = skb_get_queue_mapping(skb);
- err = dma_tx_fragment(ring, skb);
+ /* dma_tx_fragment might reallocate the skb, so invalidate pointers pointing
+ * into the skb data or cb now. */
+ hdr = NULL;
+ info = NULL;
+ err = dma_tx_fragment(ring, &skb);
if (unlikely(err == -ENOKEY)) {
/* Drop this packet, as we don't have the encryption key
* anymore and must not transmit it unencrypted. */
ring->nr_failed_tx_packets++;
ring->nr_total_packet_tries += status->frame_count;
#endif /* DEBUG */
- ieee80211_tx_status_irqsafe(dev->wl->hw, meta->skb);
+ ieee80211_tx_status(dev->wl->hw, meta->skb);
- /* skb is freed by ieee80211_tx_status_irqsafe() */
+ /* skb is freed by ieee80211_tx_status() */
meta->skb = NULL;
} else {
/* No need to call free_descriptor_buffer here, as
static void b43_led_turn_on(struct b43_wldev *dev, u8 led_index,
bool activelow)
{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
u16 ctl;
- spin_lock_irqsave(&wl->leds_lock, flags);
ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
if (activelow)
ctl &= ~(1 << led_index);
else
ctl |= (1 << led_index);
b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl);
- spin_unlock_irqrestore(&wl->leds_lock, flags);
}
static void b43_led_turn_off(struct b43_wldev *dev, u8 led_index,
bool activelow)
{
- struct b43_wl *wl = dev->wl;
- unsigned long flags;
u16 ctl;
- spin_lock_irqsave(&wl->leds_lock, flags);
ctl = b43_read16(dev, B43_MMIO_GPIO_CONTROL);
if (activelow)
ctl |= (1 << led_index);
else
ctl &= ~(1 << led_index);
b43_write16(dev, B43_MMIO_GPIO_CONTROL, ctl);
- spin_unlock_irqrestore(&wl->leds_lock, flags);
}
-/* Callback from the LED subsystem. */
-static void b43_led_brightness_set(struct led_classdev *led_dev,
- enum led_brightness brightness)
+static void b43_led_update(struct b43_wldev *dev,
+ struct b43_led *led)
{
- struct b43_led *led = container_of(led_dev, struct b43_led, led_dev);
- struct b43_wldev *dev = led->dev;
bool radio_enabled;
+ bool turn_on;
- if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED))
+ if (!led->wl)
return;
- /* Checking the radio-enabled status here is slightly racy,
- * but we want to avoid the locking overhead and we don't care
- * whether the LED has the wrong state for a second. */
radio_enabled = (dev->phy.radio_on && dev->radio_hw_enable);
- if (brightness == LED_OFF || !radio_enabled)
- b43_led_turn_off(dev, led->index, led->activelow);
+ /* The led->state read is racy, but we don't care. In case we raced
+ * with the brightness_set handler, we will be called again soon
+ * to fixup our state. */
+ if (radio_enabled)
+ turn_on = atomic_read(&led->state) != LED_OFF;
else
+ turn_on = 0;
+ if (turn_on == led->hw_state)
+ return;
+ led->hw_state = turn_on;
+
+ if (turn_on)
b43_led_turn_on(dev, led->index, led->activelow);
+ else
+ b43_led_turn_off(dev, led->index, led->activelow);
+}
+
+static void b43_leds_work(struct work_struct *work)
+{
+ struct b43_leds *leds = container_of(work, struct b43_leds, work);
+ struct b43_wl *wl = container_of(leds, struct b43_wl, leds);
+ struct b43_wldev *dev;
+
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (unlikely(!dev || b43_status(dev) < B43_STAT_STARTED))
+ goto out_unlock;
+
+ b43_led_update(dev, &wl->leds.led_tx);
+ b43_led_update(dev, &wl->leds.led_rx);
+ b43_led_update(dev, &wl->leds.led_radio);
+ b43_led_update(dev, &wl->leds.led_assoc);
+
+out_unlock:
+ mutex_unlock(&wl->mutex);
+}
+
+/* Callback from the LED subsystem. */
+static void b43_led_brightness_set(struct led_classdev *led_dev,
+ enum led_brightness brightness)
+{
+ struct b43_led *led = container_of(led_dev, struct b43_led, led_dev);
+ struct b43_wl *wl = led->wl;
+
+ if (likely(!wl->leds.stop)) {
+ atomic_set(&led->state, brightness);
+ ieee80211_queue_work(wl->hw, &wl->leds.work);
+ }
}
static int b43_register_led(struct b43_wldev *dev, struct b43_led *led,
{
int err;
- b43_led_turn_off(dev, led_index, activelow);
- if (led->dev)
+ if (led->wl)
return -EEXIST;
if (!default_trigger)
return -EINVAL;
- led->dev = dev;
+ led->wl = dev->wl;
led->index = led_index;
led->activelow = activelow;
strncpy(led->name, name, sizeof(led->name));
+ atomic_set(&led->state, 0);
led->led_dev.name = led->name;
led->led_dev.default_trigger = default_trigger;
err = led_classdev_register(dev->dev->dev, &led->led_dev);
if (err) {
b43warn(dev->wl, "LEDs: Failed to register %s\n", name);
- led->dev = NULL;
+ led->wl = NULL;
return err;
}
+
return 0;
}
static void b43_unregister_led(struct b43_led *led)
{
- if (!led->dev)
+ if (!led->wl)
return;
led_classdev_unregister(&led->led_dev);
- b43_led_turn_off(led->dev, led->index, led->activelow);
- led->dev = NULL;
+ led->wl = NULL;
}
static void b43_map_led(struct b43_wldev *dev,
* generic LED triggers. */
switch (behaviour) {
case B43_LED_INACTIVE:
- break;
case B43_LED_OFF:
- b43_led_turn_off(dev, led_index, activelow);
- break;
case B43_LED_ON:
- b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_ACTIVITY:
case B43_LED_TRANSFER:
case B43_LED_APTRANSFER:
snprintf(name, sizeof(name),
"b43-%s::tx", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_tx, name,
+ b43_register_led(dev, &dev->wl->leds.led_tx, name,
ieee80211_get_tx_led_name(hw),
led_index, activelow);
snprintf(name, sizeof(name),
"b43-%s::rx", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_rx, name,
+ b43_register_led(dev, &dev->wl->leds.led_rx, name,
ieee80211_get_rx_led_name(hw),
led_index, activelow);
break;
case B43_LED_MODE_BG:
snprintf(name, sizeof(name),
"b43-%s::radio", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_radio, name,
+ b43_register_led(dev, &dev->wl->leds.led_radio, name,
ieee80211_get_radio_led_name(hw),
led_index, activelow);
- /* Sync the RF-kill LED state with radio and switch states. */
- if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev))
- b43_led_turn_on(dev, led_index, activelow);
break;
case B43_LED_WEIRD:
case B43_LED_ASSOC:
snprintf(name, sizeof(name),
"b43-%s::assoc", wiphy_name(hw->wiphy));
- b43_register_led(dev, &dev->led_assoc, name,
+ b43_register_led(dev, &dev->wl->leds.led_assoc, name,
ieee80211_get_assoc_led_name(hw),
led_index, activelow);
break;
}
}
-void b43_leds_init(struct b43_wldev *dev)
+static void b43_led_get_sprominfo(struct b43_wldev *dev,
+ unsigned int led_index,
+ enum b43_led_behaviour *behaviour,
+ bool *activelow)
{
struct ssb_bus *bus = dev->dev->bus;
u8 sprom[4];
- int i;
- enum b43_led_behaviour behaviour;
- bool activelow;
sprom[0] = bus->sprom.gpio0;
sprom[1] = bus->sprom.gpio1;
sprom[2] = bus->sprom.gpio2;
sprom[3] = bus->sprom.gpio3;
- for (i = 0; i < 4; i++) {
- if (sprom[i] == 0xFF) {
- /* There is no LED information in the SPROM
- * for this LED. Hardcode it here. */
- activelow = 0;
- switch (i) {
- case 0:
- behaviour = B43_LED_ACTIVITY;
- activelow = 1;
- if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ)
- behaviour = B43_LED_RADIO_ALL;
- break;
- case 1:
- behaviour = B43_LED_RADIO_B;
- if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK)
- behaviour = B43_LED_ASSOC;
- break;
- case 2:
- behaviour = B43_LED_RADIO_A;
- break;
- case 3:
- behaviour = B43_LED_OFF;
- break;
- default:
- B43_WARN_ON(1);
- return;
- }
+ if (sprom[led_index] == 0xFF) {
+ /* There is no LED information in the SPROM
+ * for this LED. Hardcode it here. */
+ *activelow = 0;
+ switch (led_index) {
+ case 0:
+ *behaviour = B43_LED_ACTIVITY;
+ *activelow = 1;
+ if (bus->boardinfo.vendor == PCI_VENDOR_ID_COMPAQ)
+ *behaviour = B43_LED_RADIO_ALL;
+ break;
+ case 1:
+ *behaviour = B43_LED_RADIO_B;
+ if (bus->boardinfo.vendor == PCI_VENDOR_ID_ASUSTEK)
+ *behaviour = B43_LED_ASSOC;
+ break;
+ case 2:
+ *behaviour = B43_LED_RADIO_A;
+ break;
+ case 3:
+ *behaviour = B43_LED_OFF;
+ break;
+ default:
+ B43_WARN_ON(1);
+ return;
+ }
+ } else {
+ *behaviour = sprom[led_index] & B43_LED_BEHAVIOUR;
+ *activelow = !!(sprom[led_index] & B43_LED_ACTIVELOW);
+ }
+}
+
+void b43_leds_init(struct b43_wldev *dev)
+{
+ struct b43_led *led;
+ unsigned int i;
+ enum b43_led_behaviour behaviour;
+ bool activelow;
+
+ /* Sync the RF-kill LED state (if we have one) with radio and switch states. */
+ led = &dev->wl->leds.led_radio;
+ if (led->wl) {
+ if (dev->phy.radio_on && b43_is_hw_radio_enabled(dev)) {
+ b43_led_turn_on(dev, led->index, led->activelow);
+ led->hw_state = 1;
+ atomic_set(&led->state, 1);
} else {
- behaviour = sprom[i] & B43_LED_BEHAVIOUR;
- activelow = !!(sprom[i] & B43_LED_ACTIVELOW);
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
}
- b43_map_led(dev, i, behaviour, activelow);
}
+
+ /* Initialize TX/RX/ASSOC leds */
+ led = &dev->wl->leds.led_tx;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+ led = &dev->wl->leds.led_rx;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+ led = &dev->wl->leds.led_assoc;
+ if (led->wl) {
+ b43_led_turn_off(dev, led->index, led->activelow);
+ led->hw_state = 0;
+ atomic_set(&led->state, 0);
+ }
+
+ /* Initialize other LED states. */
+ for (i = 0; i < B43_MAX_NR_LEDS; i++) {
+ b43_led_get_sprominfo(dev, i, &behaviour, &activelow);
+ switch (behaviour) {
+ case B43_LED_OFF:
+ b43_led_turn_off(dev, i, activelow);
+ break;
+ case B43_LED_ON:
+ b43_led_turn_on(dev, i, activelow);
+ break;
+ default:
+ /* Leave others as-is. */
+ break;
+ }
+ }
+
+ dev->wl->leds.stop = 0;
}
void b43_leds_exit(struct b43_wldev *dev)
{
- b43_unregister_led(&dev->led_tx);
- b43_unregister_led(&dev->led_rx);
- b43_unregister_led(&dev->led_assoc);
- b43_unregister_led(&dev->led_radio);
+ struct b43_leds *leds = &dev->wl->leds;
+
+ b43_led_turn_off(dev, leds->led_tx.index, leds->led_tx.activelow);
+ b43_led_turn_off(dev, leds->led_rx.index, leds->led_rx.activelow);
+ b43_led_turn_off(dev, leds->led_assoc.index, leds->led_assoc.activelow);
+ b43_led_turn_off(dev, leds->led_radio.index, leds->led_radio.activelow);
+}
+
+void b43_leds_stop(struct b43_wldev *dev)
+{
+ struct b43_leds *leds = &dev->wl->leds;
+
+ leds->stop = 1;
+ cancel_work_sync(&leds->work);
+}
+
+void b43_leds_register(struct b43_wldev *dev)
+{
+ unsigned int i;
+ enum b43_led_behaviour behaviour;
+ bool activelow;
+
+ INIT_WORK(&dev->wl->leds.work, b43_leds_work);
+
+ /* Register the LEDs to the LED subsystem. */
+ for (i = 0; i < B43_MAX_NR_LEDS; i++) {
+ b43_led_get_sprominfo(dev, i, &behaviour, &activelow);
+ b43_map_led(dev, i, behaviour, activelow);
+ }
+}
+
+void b43_leds_unregister(struct b43_wl *wl)
+{
+ struct b43_leds *leds = &wl->leds;
+
+ b43_unregister_led(&leds->led_tx);
+ b43_unregister_led(&leds->led_rx);
+ b43_unregister_led(&leds->led_assoc);
+ b43_unregister_led(&leds->led_radio);
}
#ifndef B43_LEDS_H_
#define B43_LEDS_H_
+struct b43_wl;
struct b43_wldev;
#ifdef CONFIG_B43_LEDS
#include <linux/types.h>
#include <linux/leds.h>
+#include <linux/workqueue.h>
#define B43_LED_MAX_NAME_LEN 31
struct b43_led {
- struct b43_wldev *dev;
+ struct b43_wl *wl;
/* The LED class device */
struct led_classdev led_dev;
/* The index number of the LED. */
bool activelow;
/* The unique name string for this LED device. */
char name[B43_LED_MAX_NAME_LEN + 1];
+ /* The current status of the LED. This is updated locklessly. */
+ atomic_t state;
+ /* The active state in hardware. */
+ bool hw_state;
};
+struct b43_leds {
+ struct b43_led led_tx;
+ struct b43_led led_rx;
+ struct b43_led led_radio;
+ struct b43_led led_assoc;
+
+ bool stop;
+ struct work_struct work;
+};
+
+#define B43_MAX_NR_LEDS 4
+
#define B43_LED_BEHAVIOUR 0x7F
#define B43_LED_ACTIVELOW 0x80
/* LED behaviour values */
B43_LED_INACTIVE,
};
+void b43_leds_register(struct b43_wldev *dev);
+void b43_leds_unregister(struct b43_wl *wl);
void b43_leds_init(struct b43_wldev *dev);
void b43_leds_exit(struct b43_wldev *dev);
+void b43_leds_stop(struct b43_wldev *dev);
#else /* CONFIG_B43_LEDS */
/* LED support disabled */
-struct b43_led {
+struct b43_leds {
/* empty */
};
+static inline void b43_leds_register(struct b43_wldev *dev)
+{
+}
+static inline void b43_leds_unregister(struct b43_wl *wl)
+{
+}
static inline void b43_leds_init(struct b43_wldev *dev)
{
}
static inline void b43_leds_exit(struct b43_wldev *dev)
{
}
+static inline void b43_leds_stop(struct b43_wldev *dev)
+{
+}
#endif /* CONFIG_B43_LEDS */
#endif /* B43_LEDS_H_ */
Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
+ SDIO support
+ Copyright (c) 2009 Albert Herranz <albert_herranz@yahoo.es>
+
Some parts of the code in this file are derived from the ipw2200
driver Copyright(c) 2003 - 2004 Intel Corporation.
#include "xmit.h"
#include "lo.h"
#include "pcmcia.h"
+#include "sdio.h"
+#include <linux/mmc/sdio_func.h>
MODULE_DESCRIPTION("Broadcom B43 wireless driver");
MODULE_AUTHOR("Martin Langer");
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (likely(dev && (b43_status(dev) >= B43_STAT_INITIALIZED))) {
- if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
/* wl->mutex is enough. */
b43_do_beacon_update_trigger_work(dev);
mmiowb();
/* Re-enable interrupts on the device by restoring the current interrupt mask. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
+
+#if B43_DEBUG
+ if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+ dev->irq_count++;
+ for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
+ if (reason & (1 << i))
+ dev->irq_bit_count[i]++;
+ }
+ }
+#endif
}
/* Interrupt thread handler. Handles device interrupts in thread context. */
return ret;
}
+/* SDIO interrupt handler. This runs in process context. */
+static void b43_sdio_interrupt_handler(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+ irqreturn_t ret;
+
+ mutex_lock(&wl->mutex);
+
+ ret = b43_do_interrupt(dev);
+ if (ret == IRQ_WAKE_THREAD)
+ b43_do_interrupt_thread(dev);
+
+ mutex_unlock(&wl->mutex);
+}
+
void b43_do_release_fw(struct b43_firmware_file *fw)
{
release_firmware(fw->data);
cfp_pretbtt = 50;
}
b43_write16(dev, 0x612, cfp_pretbtt);
+
+ /* FIXME: We don't currently implement the PMQ mechanism,
+ * so always disable it. If we want to implement PMQ,
+ * we need to enable it here (clear DISCPMQ) in AP mode.
+ */
+ if (0 /* ctl & B43_MACCTL_AP */) {
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL)
+ & ~B43_MACCTL_DISCPMQ);
+ } else {
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL)
+ | B43_MACCTL_DISCPMQ);
+ }
}
static void b43_rate_memory_write(struct b43_wldev *dev, u16 rate, int is_ofdm)
atomic_set(&phy->txerr_cnt, B43_PHY_TX_BADNESS_LIMIT);
wmb();
+
+#if B43_DEBUG
+ if (b43_debug(dev, B43_DBG_VERBOSESTATS)) {
+ unsigned int i;
+
+ b43dbg(dev->wl, "Stats: %7u IRQs/sec, %7u TX/sec, %7u RX/sec\n",
+ dev->irq_count / 15,
+ dev->tx_count / 15,
+ dev->rx_count / 15);
+ dev->irq_count = 0;
+ dev->tx_count = 0;
+ dev->rx_count = 0;
+ for (i = 0; i < ARRAY_SIZE(dev->irq_bit_count); i++) {
+ if (dev->irq_bit_count[i]) {
+ b43dbg(dev->wl, "Stats: %7u IRQ-%02u/sec (0x%08X)\n",
+ dev->irq_bit_count[i] / 15, i, (1 << i));
+ dev->irq_bit_count[i] = 0;
+ }
+ }
+ }
+#endif
}
static void do_periodic_work(struct b43_wldev *dev)
static int b43_rng_read(struct hwrng *rng, u32 *data)
{
struct b43_wl *wl = (struct b43_wl *)rng->priv;
+ struct b43_wldev *dev;
+ int count = -ENODEV;
- /* FIXME: We need to take wl->mutex here to make sure the device
- * is not going away from under our ass. However it could deadlock
- * with hwrng internal locking. */
-
- *data = b43_read16(wl->current_dev, B43_MMIO_RNG);
+ mutex_lock(&wl->mutex);
+ dev = wl->current_dev;
+ if (likely(dev && b43_status(dev) >= B43_STAT_INITIALIZED)) {
+ *data = b43_read16(dev, B43_MMIO_RNG);
+ count = sizeof(u16);
+ }
+ mutex_unlock(&wl->mutex);
- return (sizeof(u16));
+ return count;
}
#endif /* CONFIG_B43_HWRNG */
dev_kfree_skb(skb); /* Drop it */
}
+#if B43_DEBUG
+ dev->tx_count++;
+#endif
mutex_unlock(&wl->mutex);
}
{
struct b43_wl *wl = dev->wl;
struct b43_wldev *orig_dev;
+ u32 mask;
redo:
if (!dev || b43_status(dev) < B43_STAT_STARTED)
/* Disable interrupts on the device. */
b43_set_status(dev, B43_STAT_INITIALIZED);
- if (0 /*FIXME dev->dev->bus->bustype == SSB_BUSTYPE_SDIO*/) {
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
/* wl->mutex is locked. That is enough. */
b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, 0);
b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
b43_read32(dev, B43_MMIO_GEN_IRQ_MASK); /* Flush */
spin_unlock_irq(&wl->hardirq_lock);
}
- /* Synchronize the interrupt handlers. Unlock to avoid deadlocks. */
+ /* Synchronize and free the interrupt handlers. Unlock to avoid deadlocks. */
orig_dev = dev;
mutex_unlock(&wl->mutex);
- synchronize_irq(dev->dev->irq);
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ b43_sdio_free_irq(dev);
+ } else {
+ synchronize_irq(dev->dev->irq);
+ free_irq(dev->dev->irq, dev);
+ }
mutex_lock(&wl->mutex);
dev = wl->current_dev;
if (!dev)
goto redo;
return dev;
}
- B43_WARN_ON(b43_read32(dev, B43_MMIO_GEN_IRQ_MASK));
+ mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
+ B43_WARN_ON(mask != 0xFFFFFFFF && mask);
/* Drain the TX queue */
while (skb_queue_len(&wl->tx_queue))
dev_kfree_skb(skb_dequeue(&wl->tx_queue));
b43_mac_suspend(dev);
- free_irq(dev->dev->irq, dev);
+ b43_leds_exit(dev);
b43dbg(wl, "Wireless interface stopped\n");
return dev;
B43_WARN_ON(b43_status(dev) != B43_STAT_INITIALIZED);
drain_txstatus_queue(dev);
- err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
- b43_interrupt_thread_handler,
- IRQF_SHARED, KBUILD_MODNAME, dev);
- if (err) {
- b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
- goto out;
+ if (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) {
+ err = b43_sdio_request_irq(dev, b43_sdio_interrupt_handler);
+ if (err) {
+ b43err(dev->wl, "Cannot request SDIO IRQ\n");
+ goto out;
+ }
+ } else {
+ err = request_threaded_irq(dev->dev->irq, b43_interrupt_handler,
+ b43_interrupt_thread_handler,
+ IRQF_SHARED, KBUILD_MODNAME, dev);
+ if (err) {
+ b43err(dev->wl, "Cannot request IRQ-%d\n", dev->dev->irq);
+ goto out;
+ }
}
/* We are ready to run. */
/* Start maintainance work */
b43_periodic_tasks_setup(dev);
+ b43_leds_init(dev);
+
b43dbg(dev->wl, "Wireless interface started\n");
- out:
+out:
return err;
}
macctl |= B43_MACCTL_PSM_JMP0;
b43_write32(dev, B43_MMIO_MACCTL, macctl);
- if (!dev->suspend_in_progress) {
- b43_leds_exit(dev);
- b43_rng_exit(dev->wl);
- }
b43_dma_free(dev);
b43_pio_free(dev);
b43_chip_exit(dev);
/* Initialize a wireless core */
static int b43_wireless_core_init(struct b43_wldev *dev)
{
- struct b43_wl *wl = dev->wl;
struct ssb_bus *bus = dev->dev->bus;
struct ssb_sprom *sprom = &bus->sprom;
struct b43_phy *phy = &dev->phy;
/* Maximum Contention Window */
b43_shm_write16(dev, B43_SHM_SCRATCH, B43_SHM_SC_MAXCONT, 0x3FF);
- if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) || B43_FORCE_PIO) {
+ if ((dev->dev->bus->bustype == SSB_BUSTYPE_PCMCIA) ||
+ (dev->dev->bus->bustype == SSB_BUSTYPE_SDIO) ||
+ B43_FORCE_PIO) {
dev->__using_pio_transfers = 1;
err = b43_pio_init(dev);
} else {
ssb_bus_powerup(bus, !(sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW));
b43_upload_card_macaddress(dev);
b43_security_init(dev);
- if (!dev->suspend_in_progress)
- b43_rng_init(wl);
+
+ ieee80211_wake_queues(dev->wl->hw);
ieee80211_wake_queues(dev->wl->hw);
b43_set_status(dev, B43_STAT_INITIALIZED);
- if (!dev->suspend_in_progress)
- b43_leds_init(dev);
out:
return err;
/* Initialize struct b43_wl */
wl->hw = hw;
- spin_lock_init(&wl->leds_lock);
mutex_init(&wl->mutex);
spin_lock_init(&wl->hardirq_lock);
INIT_LIST_HEAD(&wl->devlist);
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
+ b43_leds_register(wl->current_dev);
+ b43_rng_init(wl);
}
out:
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
wl->hw->queues = wl->mac80211_initially_registered_queues;
+ b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}
b43_one_core_detach(dev);
if (list_empty(&wl->devlist)) {
+ b43_rng_exit(wl);
+ b43_leds_unregister(wl);
/* Last core on the chip unregistered.
* We can destroy common struct b43_wl.
*/
ieee80211_queue_work(dev->wl->hw, &dev->restart_work);
}
-#ifdef CONFIG_PM
-
-static int b43_suspend(struct ssb_device *dev, pm_message_t state)
-{
- struct b43_wldev *wldev = ssb_get_drvdata(dev);
- struct b43_wl *wl = wldev->wl;
-
- b43dbg(wl, "Suspending...\n");
-
- mutex_lock(&wl->mutex);
- wldev->suspend_in_progress = true;
- wldev->suspend_init_status = b43_status(wldev);
- if (wldev->suspend_init_status >= B43_STAT_STARTED)
- wldev = b43_wireless_core_stop(wldev);
- if (wldev && wldev->suspend_init_status >= B43_STAT_INITIALIZED)
- b43_wireless_core_exit(wldev);
- mutex_unlock(&wl->mutex);
-
- b43dbg(wl, "Device suspended.\n");
-
- return 0;
-}
-
-static int b43_resume(struct ssb_device *dev)
-{
- struct b43_wldev *wldev = ssb_get_drvdata(dev);
- struct b43_wl *wl = wldev->wl;
- int err = 0;
-
- b43dbg(wl, "Resuming...\n");
-
- mutex_lock(&wl->mutex);
- if (wldev->suspend_init_status >= B43_STAT_INITIALIZED) {
- err = b43_wireless_core_init(wldev);
- if (err) {
- b43err(wl, "Resume failed at core init\n");
- goto out;
- }
- }
- if (wldev->suspend_init_status >= B43_STAT_STARTED) {
- err = b43_wireless_core_start(wldev);
- if (err) {
- b43_leds_exit(wldev);
- b43_rng_exit(wldev->wl);
- b43_wireless_core_exit(wldev);
- b43err(wl, "Resume failed at core start\n");
- goto out;
- }
- }
- b43dbg(wl, "Device resumed.\n");
- out:
- wldev->suspend_in_progress = false;
- mutex_unlock(&wl->mutex);
- return err;
-}
-
-#else /* CONFIG_PM */
-# define b43_suspend NULL
-# define b43_resume NULL
-#endif /* CONFIG_PM */
-
static struct ssb_driver b43_ssb_driver = {
.name = KBUILD_MODNAME,
.id_table = b43_ssb_tbl,
.probe = b43_probe,
.remove = b43_remove,
- .suspend = b43_suspend,
- .resume = b43_resume,
};
static void b43_print_driverinfo(void)
{
const char *feat_pci = "", *feat_pcmcia = "", *feat_nphy = "",
- *feat_leds = "";
+ *feat_leds = "", *feat_sdio = "";
#ifdef CONFIG_B43_PCI_AUTOSELECT
feat_pci = "P";
#endif
#ifdef CONFIG_B43_LEDS
feat_leds = "L";
+#endif
+#ifdef CONFIG_B43_SDIO
+ feat_sdio = "S";
#endif
printk(KERN_INFO "Broadcom 43xx driver loaded "
- "[ Features: %s%s%s%s, Firmware-ID: "
+ "[ Features: %s%s%s%s%s, Firmware-ID: "
B43_SUPPORTED_FIRMWARE_ID " ]\n",
feat_pci, feat_pcmcia, feat_nphy,
- feat_leds);
+ feat_leds, feat_sdio);
}
static int __init b43_init(void)
err = b43_pcmcia_init();
if (err)
goto err_dfs_exit;
- err = ssb_driver_register(&b43_ssb_driver);
+ err = b43_sdio_init();
if (err)
goto err_pcmcia_exit;
+ err = ssb_driver_register(&b43_ssb_driver);
+ if (err)
+ goto err_sdio_exit;
b43_print_driverinfo();
return err;
+err_sdio_exit:
+ b43_sdio_exit();
err_pcmcia_exit:
b43_pcmcia_exit();
err_dfs_exit:
static void __exit b43_exit(void)
{
ssb_driver_unregister(&b43_ssb_driver);
+ b43_sdio_exit();
b43_pcmcia_exit();
b43_debugfs_exit();
}
return B43_TXPWR_RES_DONE;
}
+void b43_lpphy_op_switch_analog(struct b43_wldev *dev, bool on)
+{
+ if (on) {
+ b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVR, 0xfff8);
+ } else {
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0x0007);
+ b43_phy_set(dev, B43_LPPHY_AFE_CTL_OVR, 0x0007);
+ }
+}
+
const struct b43_phy_operations b43_phyops_lp = {
.allocate = b43_lpphy_op_allocate,
.free = b43_lpphy_op_free,
.radio_read = b43_lpphy_op_radio_read,
.radio_write = b43_lpphy_op_radio_write,
.software_rfkill = b43_lpphy_op_software_rfkill,
- .switch_analog = b43_phyop_switch_analog_generic,
+ .switch_analog = b43_lpphy_op_switch_analog,
.switch_channel = b43_lpphy_op_switch_channel,
.get_default_chan = b43_lpphy_op_get_default_chan,
.set_rx_antenna = b43_lpphy_op_set_rx_antenna,
#include "xmit.h"
#include <linux/delay.h>
+#include <linux/sched.h>
static u16 generate_cookie(struct b43_pio_txqueue *q,
unsigned int data_len)
{
struct b43_wldev *dev = q->dev;
+ struct b43_wl *wl = dev->wl;
const u8 *data = _data;
ctl |= B43_PIO_TXCTL_WRITELO | B43_PIO_TXCTL_WRITEHI;
/* Write the last byte. */
ctl &= ~B43_PIO_TXCTL_WRITEHI;
b43_piotx_write16(q, B43_PIO_TXCTL, ctl);
- b43_piotx_write16(q, B43_PIO_TXDATA, data[data_len - 1]);
+ wl->tx_tail[0] = data[data_len - 1];
+ wl->tx_tail[1] = 0;
+ ssb_block_write(dev->dev, wl->tx_tail, 2,
+ q->mmio_base + B43_PIO_TXDATA,
+ sizeof(u16));
}
return ctl;
unsigned int data_len)
{
struct b43_wldev *dev = q->dev;
+ struct b43_wl *wl = dev->wl;
const u8 *data = _data;
ctl |= B43_PIO8_TXCTL_0_7 | B43_PIO8_TXCTL_8_15 |
q->mmio_base + B43_PIO8_TXDATA,
sizeof(u32));
if (data_len & 3) {
- u32 value = 0;
-
+ wl->tx_tail[3] = 0;
/* Write the last few bytes. */
ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 |
B43_PIO8_TXCTL_24_31);
- data = &(data[data_len - 1]);
switch (data_len & 3) {
case 3:
- ctl |= B43_PIO8_TXCTL_16_23;
- value |= (u32)(*data) << 16;
- data--;
+ ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15;
+ wl->tx_tail[0] = data[data_len - 3];
+ wl->tx_tail[1] = data[data_len - 2];
+ wl->tx_tail[2] = data[data_len - 1];
+ break;
case 2:
ctl |= B43_PIO8_TXCTL_8_15;
- value |= (u32)(*data) << 8;
- data--;
+ wl->tx_tail[0] = data[data_len - 2];
+ wl->tx_tail[1] = data[data_len - 1];
+ wl->tx_tail[2] = 0;
+ break;
case 1:
- value |= (u32)(*data);
+ wl->tx_tail[0] = data[data_len - 1];
+ wl->tx_tail[1] = 0;
+ wl->tx_tail[2] = 0;
+ break;
}
b43_piotx_write32(q, B43_PIO8_TXCTL, ctl);
- b43_piotx_write32(q, B43_PIO8_TXDATA, value);
+ ssb_block_write(dev->dev, wl->tx_tail, 4,
+ q->mmio_base + B43_PIO8_TXDATA,
+ sizeof(u32));
}
return ctl;
static int pio_tx_frame(struct b43_pio_txqueue *q,
struct sk_buff *skb)
{
+ struct b43_wldev *dev = q->dev;
+ struct b43_wl *wl = dev->wl;
struct b43_pio_txpacket *pack;
- struct b43_txhdr txhdr;
u16 cookie;
int err;
unsigned int hdrlen;
struct b43_pio_txpacket, list);
cookie = generate_cookie(q, pack);
- hdrlen = b43_txhdr_size(q->dev);
- err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb,
+ hdrlen = b43_txhdr_size(dev);
+ err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb,
info, cookie);
if (err)
return err;
if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
/* Tell the firmware about the cookie of the last
* mcast frame, so it can clear the more-data bit in it. */
- b43_shm_write16(q->dev, B43_SHM_SHARED,
+ b43_shm_write16(dev, B43_SHM_SHARED,
B43_SHM_SH_MCASTCOOKIE, cookie);
}
pack->skb = skb;
if (q->rev >= 8)
- pio_tx_frame_4byte_queue(pack, (const u8 *)&txhdr, hdrlen);
+ pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
else
- pio_tx_frame_2byte_queue(pack, (const u8 *)&txhdr, hdrlen);
+ pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
/* Remove it from the list of available packet slots.
* It will be put back when we receive the status report. */
q->buffer_used -= total_len;
q->free_packet_slots += 1;
- ieee80211_tx_status_irqsafe(dev->wl->hw, pack->skb);
+ ieee80211_tx_status(dev->wl->hw, pack->skb);
pack->skb = NULL;
list_add(&pack->list, &q->packets_list);
static bool pio_rx_frame(struct b43_pio_rxqueue *q)
{
struct b43_wldev *dev = q->dev;
- struct b43_rxhdr_fw4 rxhdr;
+ struct b43_wl *wl = dev->wl;
u16 len;
u32 macstat;
unsigned int i, padding;
struct sk_buff *skb;
const char *err_msg = NULL;
- memset(&rxhdr, 0, sizeof(rxhdr));
+ memset(&wl->rxhdr, 0, sizeof(wl->rxhdr));
/* Check if we have data and wait for it to get ready. */
if (q->rev >= 8) {
/* Get the preamble (RX header) */
if (q->rev >= 8) {
- ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
+ ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
q->mmio_base + B43_PIO8_RXDATA,
sizeof(u32));
} else {
- ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
+ ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
q->mmio_base + B43_PIO_RXDATA,
sizeof(u16));
}
/* Sanity checks. */
- len = le16_to_cpu(rxhdr.frame_len);
+ len = le16_to_cpu(wl->rxhdr.frame_len);
if (unlikely(len > 0x700)) {
err_msg = "len > 0x700";
goto rx_error;
goto rx_error;
}
- macstat = le32_to_cpu(rxhdr.mac_status);
+ macstat = le32_to_cpu(wl->rxhdr.mac_status);
if (macstat & B43_RX_MAC_FCSERR) {
if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) {
/* Drop frames with failed FCS. */
q->mmio_base + B43_PIO8_RXDATA,
sizeof(u32));
if (len & 3) {
- u32 value;
- char *data;
-
/* Read the last few bytes. */
- value = b43_piorx_read32(q, B43_PIO8_RXDATA);
- data = &(skb->data[len + padding - 1]);
+ ssb_block_read(dev->dev, wl->rx_tail, 4,
+ q->mmio_base + B43_PIO8_RXDATA,
+ sizeof(u32));
switch (len & 3) {
case 3:
- *data = (value >> 16);
- data--;
+ skb->data[len + padding - 3] = wl->rx_tail[0];
+ skb->data[len + padding - 2] = wl->rx_tail[1];
+ skb->data[len + padding - 1] = wl->rx_tail[2];
+ break;
case 2:
- *data = (value >> 8);
- data--;
+ skb->data[len + padding - 2] = wl->rx_tail[0];
+ skb->data[len + padding - 1] = wl->rx_tail[1];
+ break;
case 1:
- *data = value;
+ skb->data[len + padding - 1] = wl->rx_tail[0];
+ break;
}
}
} else {
q->mmio_base + B43_PIO_RXDATA,
sizeof(u16));
if (len & 1) {
- u16 value;
-
/* Read the last byte. */
- value = b43_piorx_read16(q, B43_PIO_RXDATA);
- skb->data[len + padding - 1] = value;
+ ssb_block_read(dev->dev, wl->rx_tail, 2,
+ q->mmio_base + B43_PIO_RXDATA,
+ sizeof(u16));
+ skb->data[len + padding - 1] = wl->rx_tail[0];
}
}
- b43_rx(q->dev, skb, &rxhdr);
+ b43_rx(q->dev, skb, &wl->rxhdr);
return 1;
/* Returns TRUE, if the radio is enabled in hardware. */
bool b43_is_hw_radio_enabled(struct b43_wldev *dev)
{
- if (dev->phy.rev >= 3) {
+ if (dev->phy.rev >= 3 || dev->phy.type == B43_PHYTYPE_LP) {
if (!(b43_read32(dev, B43_MMIO_RADIO_HWENABLED_HI)
& B43_MMIO_RADIO_HWENABLED_HI_MASK))
return 1;
} else {
- if (b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
+ if (b43_status(dev) >= B43_STAT_STARTED &&
+ b43_read16(dev, B43_MMIO_RADIO_HWENABLED_LO)
& B43_MMIO_RADIO_HWENABLED_LO_MASK)
return 1;
}
--- /dev/null
+/*
+ * Broadcom B43 wireless driver
+ *
+ * SDIO over Sonics Silicon Backplane bus glue for b43.
+ *
+ * Copyright (C) 2009 Albert Herranz
+ * Copyright (C) 2009 Michael Buesch <mb@bu3sch.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/ssb/ssb.h>
+
+#include "sdio.h"
+#include "b43.h"
+
+
+#define HNBU_CHIPID 0x01 /* vendor & device id */
+
+#define B43_SDIO_BLOCK_SIZE 64 /* rx fifo max size in bytes */
+
+
+static const struct b43_sdio_quirk {
+ u16 vendor;
+ u16 device;
+ unsigned int quirks;
+} b43_sdio_quirks[] = {
+ { 0x14E4, 0x4318, SSB_QUIRK_SDIO_READ_AFTER_WRITE32, },
+ { },
+};
+
+
+static unsigned int b43_sdio_get_quirks(u16 vendor, u16 device)
+{
+ const struct b43_sdio_quirk *q;
+
+ for (q = b43_sdio_quirks; q->quirks; q++) {
+ if (vendor == q->vendor && device == q->device)
+ return q->quirks;
+ }
+
+ return 0;
+}
+
+static void b43_sdio_interrupt_dispatcher(struct sdio_func *func)
+{
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+ struct b43_wldev *dev = sdio->irq_handler_opaque;
+
+ if (unlikely(b43_status(dev) < B43_STAT_STARTED))
+ return;
+
+ sdio_release_host(func);
+ sdio->irq_handler(dev);
+ sdio_claim_host(func);
+}
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev))
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct sdio_func *func = bus->host_sdio;
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+ int err;
+
+ sdio->irq_handler_opaque = dev;
+ sdio->irq_handler = handler;
+ sdio_claim_host(func);
+ err = sdio_claim_irq(func, b43_sdio_interrupt_dispatcher);
+ sdio_release_host(func);
+
+ return err;
+}
+
+void b43_sdio_free_irq(struct b43_wldev *dev)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+ struct sdio_func *func = bus->host_sdio;
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+
+ sdio_claim_host(func);
+ sdio_release_irq(func);
+ sdio_release_host(func);
+ sdio->irq_handler_opaque = NULL;
+ sdio->irq_handler = NULL;
+}
+
+static int b43_sdio_probe(struct sdio_func *func,
+ const struct sdio_device_id *id)
+{
+ struct b43_sdio *sdio;
+ struct sdio_func_tuple *tuple;
+ u16 vendor = 0, device = 0;
+ int error;
+
+ /* Look for the card chip identifier. */
+ tuple = func->tuples;
+ while (tuple) {
+ switch (tuple->code) {
+ case 0x80:
+ switch (tuple->data[0]) {
+ case HNBU_CHIPID:
+ if (tuple->size != 5)
+ break;
+ vendor = tuple->data[1] | (tuple->data[2]<<8);
+ device = tuple->data[3] | (tuple->data[4]<<8);
+ dev_info(&func->dev, "Chip ID %04x:%04x\n",
+ vendor, device);
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ tuple = tuple->next;
+ }
+ if (!vendor || !device) {
+ error = -ENODEV;
+ goto out;
+ }
+
+ sdio_claim_host(func);
+ error = sdio_set_block_size(func, B43_SDIO_BLOCK_SIZE);
+ if (error) {
+ dev_err(&func->dev, "failed to set block size to %u bytes,"
+ " error %d\n", B43_SDIO_BLOCK_SIZE, error);
+ goto err_release_host;
+ }
+ error = sdio_enable_func(func);
+ if (error) {
+ dev_err(&func->dev, "failed to enable func, error %d\n", error);
+ goto err_release_host;
+ }
+ sdio_release_host(func);
+
+ sdio = kzalloc(sizeof(*sdio), GFP_KERNEL);
+ if (!sdio) {
+ error = -ENOMEM;
+ dev_err(&func->dev, "failed to allocate ssb bus\n");
+ goto err_disable_func;
+ }
+ error = ssb_bus_sdiobus_register(&sdio->ssb, func,
+ b43_sdio_get_quirks(vendor, device));
+ if (error) {
+ dev_err(&func->dev, "failed to register ssb sdio bus,"
+ " error %d\n", error);
+ goto err_free_ssb;
+ }
+ sdio_set_drvdata(func, sdio);
+
+ return 0;
+
+err_free_ssb:
+ kfree(sdio);
+err_disable_func:
+ sdio_disable_func(func);
+err_release_host:
+ sdio_release_host(func);
+out:
+ return error;
+}
+
+static void b43_sdio_remove(struct sdio_func *func)
+{
+ struct b43_sdio *sdio = sdio_get_drvdata(func);
+
+ ssb_bus_unregister(&sdio->ssb);
+ sdio_disable_func(func);
+ kfree(sdio);
+ sdio_set_drvdata(func, NULL);
+}
+
+static const struct sdio_device_id b43_sdio_ids[] = {
+ { SDIO_DEVICE(0x02d0, 0x044b) }, /* Nintendo Wii WLAN daughter card */
+ { },
+};
+
+static struct sdio_driver b43_sdio_driver = {
+ .name = "b43-sdio",
+ .id_table = b43_sdio_ids,
+ .probe = b43_sdio_probe,
+ .remove = b43_sdio_remove,
+};
+
+int b43_sdio_init(void)
+{
+ return sdio_register_driver(&b43_sdio_driver);
+}
+
+void b43_sdio_exit(void)
+{
+ sdio_unregister_driver(&b43_sdio_driver);
+}
--- /dev/null
+#ifndef B43_SDIO_H_
+#define B43_SDIO_H_
+
+#include <linux/ssb/ssb.h>
+
+struct b43_wldev;
+
+
+#ifdef CONFIG_B43_SDIO
+
+struct b43_sdio {
+ struct ssb_bus ssb;
+ void *irq_handler_opaque;
+ void (*irq_handler)(struct b43_wldev *dev);
+};
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev));
+void b43_sdio_free_irq(struct b43_wldev *dev);
+
+int b43_sdio_init(void);
+void b43_sdio_exit(void);
+
+
+#else /* CONFIG_B43_SDIO */
+
+
+int b43_sdio_request_irq(struct b43_wldev *dev,
+ void (*handler)(struct b43_wldev *dev))
+{
+ return -ENODEV;
+}
+void b43_sdio_free_irq(struct b43_wldev *dev)
+{
+}
+static inline int b43_sdio_init(void)
+{
+ return 0;
+}
+static inline void b43_sdio_exit(void)
+{
+}
+
+#endif /* CONFIG_B43_SDIO */
+#endif /* B43_SDIO_H_ */
*/
-#include "xmit.h"
+#include "b43.h"
#include "phy_common.h"
#include "dma.h"
#include "pio.h"
}
memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
- ieee80211_rx_irqsafe(dev->wl->hw, skb);
+ local_bh_disable();
+ ieee80211_rx(dev->wl->hw, skb);
+ local_bh_enable();
+
+#if B43_DEBUG
+ dev->rx_count++;
+#endif
return;
drop:
b43dbg(dev->wl, "RX: Packet dropped\n");
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/workqueue.h>
+#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/dma-mapping.h>
#include <net/dst.h>
#include <linux/delay.h>
#include <linux/pci.h>
+#include <linux/sched.h>
#include <linux/types.h>
#include "b43legacy.h"
/* Host AP driver Info Frame processing (part of hostap.o module) */
#include <linux/if_arp.h>
+#include <linux/sched.h>
#include "hostap_wlan.h"
#include "hostap.h"
#include "hostap_ap.h"
/* ioctl() (mostly Linux Wireless Extensions) routines for Host AP driver */
#include <linux/types.h>
+#include <linux/sched.h>
#include <linux/ethtool.h>
#include <linux/if_arp.h>
#include <net/lib80211.h>
fail:
if (dev) {
- if (registered)
+ if (registered) {
+ unregister_ieee80211(priv->ieee);
unregister_netdev(dev);
+ }
ipw2100_hw_stop_adapter(priv);
/* Unregister the device first - this results in close()
* being called if the device is open. If we free storage
* first, then close() will crash. */
+ unregister_ieee80211(priv->ieee);
unregister_netdev(dev);
/* ipw2100_down will ensure that there is no more pending work
******************************************************************************/
+#include <linux/sched.h>
#include "ipw2200.h"
if (err) {
IPW_ERROR("Failed to register promiscuous network "
"device (error %d).\n", err);
+ unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
goto out_remove_sysfs;
}
mutex_unlock(&priv->mutex);
+ unregister_ieee80211(priv->ieee);
unregister_netdev(priv->net_dev);
if (priv->rxq) {
/* ieee80211.c */
extern void free_ieee80211(struct net_device *dev, int monitor);
extern struct net_device *alloc_ieee80211(int sizeof_priv, int monitor);
+extern void unregister_ieee80211(struct libipw_device *ieee);
extern int libipw_change_mtu(struct net_device *dev, int new_mtu);
extern void libipw_networks_age(struct libipw_device *ieee,
libipw_networks_free(ieee);
/* free cfg80211 resources */
- if (!monitor) {
- wiphy_unregister(ieee->wdev.wiphy);
- kfree(ieee->a_band.channels);
- kfree(ieee->bg_band.channels);
+ if (!monitor)
wiphy_free(ieee->wdev.wiphy);
- }
free_netdev(dev);
}
+void unregister_ieee80211(struct libipw_device *ieee)
+{
+ wiphy_unregister(ieee->wdev.wiphy);
+ kfree(ieee->a_band.channels);
+ kfree(ieee->bg_band.channels);
+}
+
#ifdef CONFIG_LIBIPW_DEBUG
static int debug = 0;
EXPORT_SYMBOL(alloc_ieee80211);
EXPORT_SYMBOL(free_ieee80211);
+EXPORT_SYMBOL(unregister_ieee80211);
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
.load_ucode = iwl5000_load_ucode,
+ .dump_nic_event_log = iwl_dump_nic_event_log,
+ .dump_nic_error_log = iwl_dump_nic_error_log,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.send_tx_power = iwl5000_send_tx_power,
u8 sta_id = iwl_find_station(priv, hdr->addr1);
if (sta_id == IWL_INVALID_STATION) {
- IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n",
+ IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
hdr->addr1);
sta_id = iwl_add_station(priv, hdr->addr1, false,
CMD_ASYNC, NULL);
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
if (rx_status.band == IEEE80211_BAND_5GHZ)
rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
- rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags &
+ rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
/* set the preamble flag if appropriate */
.txq_free_tfd = iwl3945_hw_txq_free_tfd,
.txq_init = iwl3945_hw_tx_queue_init,
.load_ucode = iwl3945_load_bsm,
+ .dump_nic_event_log = iwl3945_dump_nic_event_log,
+ .dump_nic_error_log = iwl3945_dump_nic_error_log,
.apm_ops = {
.init = iwl3945_apm_init,
.reset = iwl3945_apm_reset,
struct iwl_host_cmd *cmd);
extern unsigned int iwl3945_fill_beacon_frame(struct iwl_priv *priv,
struct ieee80211_hdr *hdr,int left);
+extern void iwl3945_dump_nic_event_log(struct iwl_priv *priv);
+extern void iwl3945_dump_nic_error_log(struct iwl_priv *priv);
/*
* Currently used by iwl-3945-rs... look at restructuring so that it doesn't
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
agg->frame_count, txq_id, idx);
hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
+ if (!hdr) {
+ IWL_ERR(priv,
+ "BUG_ON idx doesn't point to valid skb"
+ " idx=%d, txq_id=%d\n", idx, txq_id);
+ return -1;
+ }
sc = le16_to_cpu(hdr->seq_ctrl);
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
.alive_notify = iwl4965_alive_notify,
.init_alive_start = iwl4965_init_alive_start,
.load_ucode = iwl4965_load_bsm,
+ .dump_nic_event_log = iwl_dump_nic_event_log,
+ .dump_nic_error_log = iwl_dump_nic_error_log,
.apm_ops = {
.init = iwl4965_apm_init,
.reset = iwl4965_apm_reset,
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
(s32)average_noise[i])) / 1500;
/* bound gain by 2 bits value max, 3rd bit is sign */
data->delta_gain_code[i] =
- min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
+ min(abs(delta_g), (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
if (delta_g < 0)
/* set negative sign */
agg->frame_count, txq_id, idx);
hdr = iwl_tx_queue_get_hdr(priv, txq_id, idx);
+ if (!hdr) {
+ IWL_ERR(priv,
+ "BUG_ON idx doesn't point to valid skb"
+ " idx=%d, txq_id=%d\n", idx, txq_id);
+ return -1;
+ }
sc = le16_to_cpu(hdr->seq_ctrl);
if (idx != (SEQ_TO_SN(sc) & 0xff)) {
.rx_handler_setup = iwl5000_rx_handler_setup,
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+ .dump_nic_event_log = iwl_dump_nic_event_log,
+ .dump_nic_error_log = iwl_dump_nic_error_log,
.load_ucode = iwl5000_load_ucode,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.rx_handler_setup = iwl5000_rx_handler_setup,
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+ .dump_nic_event_log = iwl_dump_nic_event_log,
+ .dump_nic_error_log = iwl_dump_nic_error_log,
.load_ucode = iwl5000_load_ucode,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
.load_ucode = iwl5000_load_ucode,
+ .dump_nic_event_log = iwl_dump_nic_event_log,
+ .dump_nic_error_log = iwl_dump_nic_error_log,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.send_tx_power = iwl5000_send_tx_power,
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
return ret;
}
+#ifdef CONFIG_IWLWIFI_DEBUG
+static const char *desc_lookup_text[] = {
+ "OK",
+ "FAIL",
+ "BAD_PARAM",
+ "BAD_CHECKSUM",
+ "NMI_INTERRUPT_WDG",
+ "SYSASSERT",
+ "FATAL_ERROR",
+ "BAD_COMMAND",
+ "HW_ERROR_TUNE_LOCK",
+ "HW_ERROR_TEMPERATURE",
+ "ILLEGAL_CHAN_FREQ",
+ "VCC_NOT_STABLE",
+ "FH_ERROR",
+ "NMI_INTERRUPT_HOST",
+ "NMI_INTERRUPT_ACTION_PT",
+ "NMI_INTERRUPT_UNKNOWN",
+ "UCODE_VERSION_MISMATCH",
+ "HW_ERROR_ABS_LOCK",
+ "HW_ERROR_CAL_LOCK_FAIL",
+ "NMI_INTERRUPT_INST_ACTION_PT",
+ "NMI_INTERRUPT_DATA_ACTION_PT",
+ "NMI_TRM_HW_ER",
+ "NMI_INTERRUPT_TRM",
+ "NMI_INTERRUPT_BREAK_POINT"
+ "DEBUG_0",
+ "DEBUG_1",
+ "DEBUG_2",
+ "DEBUG_3",
+ "UNKNOWN"
+};
+
+static const char *desc_lookup(int i)
+{
+ int max = ARRAY_SIZE(desc_lookup_text) - 1;
+
+ if (i < 0 || i > max)
+ i = max;
+
+ return desc_lookup_text[i];
+}
+
+#define ERROR_START_OFFSET (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE (7 * sizeof(u32))
+
+void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+ u32 data2, line;
+ u32 desc, time, count, base, data1;
+ u32 blink1, blink2, ilink1, ilink2;
+
+ if (priv->ucode_type == UCODE_INIT)
+ base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
+ else
+ base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
+
+ if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+ IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
+ return;
+ }
+
+ count = iwl_read_targ_mem(priv, base);
+
+ if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+ IWL_ERR(priv, "Start IWL Error Log Dump:\n");
+ IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
+ priv->status, count);
+ }
+
+ desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
+ blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
+ blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
+ ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
+ ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
+ data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
+ data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
+ line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
+ time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
+
+ IWL_ERR(priv, "Desc Time "
+ "data1 data2 line\n");
+ IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
+ desc_lookup(desc), desc, time, data1, data2, line);
+ IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n");
+ IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
+ ilink1, ilink2);
+
+}
+
+#define EVENT_START_OFFSET (4 * sizeof(u32))
+
+/**
+ * iwl_print_event_log - Dump error event log to syslog
+ *
+ */
+static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
+ u32 num_events, u32 mode)
+{
+ u32 i;
+ u32 base; /* SRAM byte address of event log header */
+ u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
+ u32 ptr; /* SRAM byte address of log data */
+ u32 ev, time, data; /* event log data */
+
+ if (num_events == 0)
+ return;
+ if (priv->ucode_type == UCODE_INIT)
+ base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+ else
+ base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+ if (mode == 0)
+ event_size = 2 * sizeof(u32);
+ else
+ event_size = 3 * sizeof(u32);
+
+ ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
+
+ /* "time" is actually "data" for mode 0 (no timestamp).
+ * place event id # at far right for easier visual parsing. */
+ for (i = 0; i < num_events; i++) {
+ ev = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ time = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ if (mode == 0) {
+ /* data, ev */
+ IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
+ } else {
+ data = iwl_read_targ_mem(priv, ptr);
+ ptr += sizeof(u32);
+ IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
+ time, data, ev);
+ }
+ }
+}
+
+void iwl_dump_nic_event_log(struct iwl_priv *priv)
+{
+ u32 base; /* SRAM byte address of event log header */
+ u32 capacity; /* event log capacity in # entries */
+ u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
+ u32 num_wraps; /* # times uCode wrapped to top of log */
+ u32 next_entry; /* index of next entry to be written by uCode */
+ u32 size; /* # entries that we'll print */
+
+ if (priv->ucode_type == UCODE_INIT)
+ base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
+ else
+ base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
+
+ if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+ IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
+ return;
+ }
+
+ /* event log header */
+ capacity = iwl_read_targ_mem(priv, base);
+ mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
+ num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
+ next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
+
+ size = num_wraps ? capacity : next_entry;
+
+ /* bail out if nothing in log */
+ if (size == 0) {
+ IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
+ return;
+ }
+
+ IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
+ size, num_wraps);
+
+ /* if uCode has wrapped back to top of log, start at the oldest entry,
+ * i.e the next one that uCode would fill. */
+ if (num_wraps)
+ iwl_print_event_log(priv, next_entry,
+ capacity - next_entry, mode);
+ /* (then/else) start at top of log */
+ iwl_print_event_log(priv, 0, next_entry, mode);
+
+}
+#endif
+
/**
* iwl_alive_start - called after REPLY_ALIVE notification received
* from protocol/runtime uCode (initialization uCode's
out_pci_disable_device:
pci_disable_device(pdev);
out_ieee80211_free_hw:
- ieee80211_free_hw(priv->hw);
iwl_free_traffic_mem(priv);
+ ieee80211_free_hw(priv->hw);
out:
return err;
}
#define RX_RES_PHY_FLAGS_MOD_CCK_MSK cpu_to_le16(1 << 1)
#define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK cpu_to_le16(1 << 2)
#define RX_RES_PHY_FLAGS_NARROW_BAND_MSK cpu_to_le16(1 << 3)
-#define RX_RES_PHY_FLAGS_ANTENNA_MSK cpu_to_le16(0xf0)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK 0xf0
#define RX_RES_PHY_FLAGS_ANTENNA_POS 4
#define RX_RES_STATUS_SEC_TYPE_MSK (0x7 << 8)
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/etherdevice.h>
+#include <linux/sched.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr);
IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id));
}
-
-static const char *desc_lookup_text[] = {
- "OK",
- "FAIL",
- "BAD_PARAM",
- "BAD_CHECKSUM",
- "NMI_INTERRUPT_WDG",
- "SYSASSERT",
- "FATAL_ERROR",
- "BAD_COMMAND",
- "HW_ERROR_TUNE_LOCK",
- "HW_ERROR_TEMPERATURE",
- "ILLEGAL_CHAN_FREQ",
- "VCC_NOT_STABLE",
- "FH_ERROR",
- "NMI_INTERRUPT_HOST",
- "NMI_INTERRUPT_ACTION_PT",
- "NMI_INTERRUPT_UNKNOWN",
- "UCODE_VERSION_MISMATCH",
- "HW_ERROR_ABS_LOCK",
- "HW_ERROR_CAL_LOCK_FAIL",
- "NMI_INTERRUPT_INST_ACTION_PT",
- "NMI_INTERRUPT_DATA_ACTION_PT",
- "NMI_TRM_HW_ER",
- "NMI_INTERRUPT_TRM",
- "NMI_INTERRUPT_BREAK_POINT"
- "DEBUG_0",
- "DEBUG_1",
- "DEBUG_2",
- "DEBUG_3",
- "UNKNOWN"
-};
-
-static const char *desc_lookup(int i)
-{
- int max = ARRAY_SIZE(desc_lookup_text) - 1;
-
- if (i < 0 || i > max)
- i = max;
-
- return desc_lookup_text[i];
-}
-
-#define ERROR_START_OFFSET (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE (7 * sizeof(u32))
-
-static void iwl_dump_nic_error_log(struct iwl_priv *priv)
-{
- u32 data2, line;
- u32 desc, time, count, base, data1;
- u32 blink1, blink2, ilink1, ilink2;
-
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
-
- if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base);
- return;
- }
-
- count = iwl_read_targ_mem(priv, base);
-
- if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
- IWL_ERR(priv, "Start IWL Error Log Dump:\n");
- IWL_ERR(priv, "Status: 0x%08lX, count: %d\n",
- priv->status, count);
- }
-
- desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
- blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
- blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
- ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
- ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
- data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
- data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
- line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
- time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
-
- IWL_ERR(priv, "Desc Time "
- "data1 data2 line\n");
- IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
- desc_lookup(desc), desc, time, data1, data2, line);
- IWL_ERR(priv, "blink1 blink2 ilink1 ilink2\n");
- IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
- ilink1, ilink2);
-
-}
-
-#define EVENT_START_OFFSET (4 * sizeof(u32))
-
-/**
- * iwl_print_event_log - Dump error event log to syslog
- *
- */
-static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
- u32 num_events, u32 mode)
-{
- u32 i;
- u32 base; /* SRAM byte address of event log header */
- u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
- u32 ptr; /* SRAM byte address of log data */
- u32 ev, time, data; /* event log data */
-
- if (num_events == 0)
- return;
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
- if (mode == 0)
- event_size = 2 * sizeof(u32);
- else
- event_size = 3 * sizeof(u32);
-
- ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
-
- /* "time" is actually "data" for mode 0 (no timestamp).
- * place event id # at far right for easier visual parsing. */
- for (i = 0; i < num_events; i++) {
- ev = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- time = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- if (mode == 0) {
- /* data, ev */
- IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
- } else {
- data = iwl_read_targ_mem(priv, ptr);
- ptr += sizeof(u32);
- IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
- time, data, ev);
- }
- }
-}
-
-void iwl_dump_nic_event_log(struct iwl_priv *priv)
-{
- u32 base; /* SRAM byte address of event log header */
- u32 capacity; /* event log capacity in # entries */
- u32 mode; /* 0 - no timestamp, 1 - timestamp recorded */
- u32 num_wraps; /* # times uCode wrapped to top of log */
- u32 next_entry; /* index of next entry to be written by uCode */
- u32 size; /* # entries that we'll print */
-
- if (priv->ucode_type == UCODE_INIT)
- base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
- else
- base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
-
- if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
- IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
- return;
- }
-
- /* event log header */
- capacity = iwl_read_targ_mem(priv, base);
- mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
- num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
- next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
-
- size = num_wraps ? capacity : next_entry;
-
- /* bail out if nothing in log */
- if (size == 0) {
- IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n");
- return;
- }
-
- IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n",
- size, num_wraps);
-
- /* if uCode has wrapped back to top of log, start at the oldest entry,
- * i.e the next one that uCode would fill. */
- if (num_wraps)
- iwl_print_event_log(priv, next_entry,
- capacity - next_entry, mode);
- /* (then/else) start at top of log */
- iwl_print_event_log(priv, 0, next_entry, mode);
-
-}
#endif
/**
* iwl_irq_handle_error - called for HW or SW error interrupt from card
#ifdef CONFIG_IWLWIFI_DEBUG
if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) {
- iwl_dump_nic_error_log(priv);
- iwl_dump_nic_event_log(priv);
+ priv->cfg->ops->lib->dump_nic_error_log(priv);
+ priv->cfg->ops->lib->dump_nic_event_log(priv);
iwl_print_rx_config_cmd(priv);
}
#endif
int (*is_valid_rtc_data_addr)(u32 addr);
/* 1st ucode load */
int (*load_ucode)(struct iwl_priv *priv);
+ void (*dump_nic_event_log)(struct iwl_priv *priv);
+ void (*dump_nic_error_log)(struct iwl_priv *priv);
/* power management */
struct iwl_apm_ops apm_ops;
/*****************************************************
* Error Handling Debugging
******************************************************/
+#ifdef CONFIG_IWLWIFI_DEBUG
void iwl_dump_nic_event_log(struct iwl_priv *priv);
+void iwl_dump_nic_error_log(struct iwl_priv *priv);
+#else
+static inline void iwl_dump_nic_event_log(struct iwl_priv *priv)
+{
+}
+
+static inline void iwl_dump_nic_error_log(struct iwl_priv *priv)
+{
+}
+#endif
+
void iwl_clear_isr_stats(struct iwl_priv *priv);
/*****************************************************
pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs);
hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos,
buf_size - pos, 0);
- pos += strlen(buf);
+ pos += strlen(buf + pos);
if (buf_size - pos > 0)
buf[pos++] = '\n';
}
if (sscanf(buf, "%d", &event_log_flag) != 1)
return -EFAULT;
if (event_log_flag == 1)
- iwl_dump_nic_event_log(priv);
+ priv->cfg->ops->lib->dump_nic_event_log(priv);
return count;
}
"0x%.4x ", ofs);
hex_dump_to_buffer(ptr + ofs, 16, 16, 2,
buf + pos, bufsz - pos, 0);
- pos += strlen(buf);
+ pos += strlen(buf + pos);
if (bufsz - pos > 0)
buf[pos++] = '\n';
}
"0x%.4x ", ofs);
hex_dump_to_buffer(ptr + ofs, 16, 16, 2,
buf + pos, bufsz - pos, 0);
- pos += strlen(buf);
+ pos += strlen(buf + pos);
if (bufsz - pos > 0)
buf[pos++] = '\n';
}
u16 *validblockaddr)
{
u16 next_link_addr = 0, link_value = 0, valid_addr;
- int ret = 0;
int usedblocks = 0;
/* set addressing mode to absolute to traverse the link list */
* check for more block on the link list
*/
valid_addr = next_link_addr;
- next_link_addr = link_value;
+ next_link_addr = link_value * sizeof(u16);
IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
usedblocks, next_link_addr);
if (iwl_read_otp_word(priv, next_link_addr, &link_value))
return -EINVAL;
if (!link_value) {
/*
- * reach the end of link list,
+ * reach the end of link list, return success and
* set address point to the starting address
* of the image
*/
- goto done;
+ *validblockaddr = valid_addr;
+ /* skip first 2 bytes (link list pointer) */
+ *validblockaddr += 2;
+ return 0;
}
/* more in the link list, continue */
usedblocks++;
- } while (usedblocks < priv->cfg->max_ll_items);
- /* OTP full, use last block */
- IWL_DEBUG_INFO(priv, "OTP is full, use last block\n");
-done:
- *validblockaddr = valid_addr;
- /* skip first 2 bytes (link list pointer) */
- *validblockaddr += 2;
- return ret;
+ } while (usedblocks <= priv->cfg->max_ll_items);
+
+ /* OTP has no valid blocks */
+ IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
+ return -EINVAL;
}
/**
* Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
*/
/* 2.4 GHz band: CCK */
-#define EEPROM_LB_CCK_20_COMMON ((0xAA)\
+#define EEPROM_LB_CCK_20_COMMON ((0xA8)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 8 bytes */
/* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_LB_OFDM_COMMON ((0xB2)\
+#define EEPROM_LB_OFDM_COMMON ((0xB0)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
/* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_HB_OFDM_COMMON ((0xCA)\
+#define EEPROM_HB_OFDM_COMMON ((0xC8)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
/* 2.4GHz band channels:
* 1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
-#define EEPROM_LB_OFDM_20_BAND ((0xE2)\
+#define EEPROM_LB_OFDM_20_BAND ((0xE0)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 64 bytes */
/* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
-#define EEPROM_LB_OFDM_HT40_BAND ((0x122)\
+#define EEPROM_LB_OFDM_HT40_BAND ((0x120)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 40 bytes */
/* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
-#define EEPROM_HB_OFDM_20_BAND ((0x14A)\
+#define EEPROM_HB_OFDM_20_BAND ((0x148)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 48 bytes */
/* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND ((0x17A)\
+#define EEPROM_HB_OFDM_HT40_BAND ((0x178)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */
/* 2.4 GHz band, channnel 13: Legacy, HT */
-#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x192)\
+#define EEPROM_LB_OFDM_20_CHANNEL_13 ((0x190)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
/* 5.2 GHz band, channnel 140: Legacy, HT */
-#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A2)\
+#define EEPROM_HB_OFDM_20_CHANNEL_140 ((0x1A0)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
/* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B2)\
+#define EEPROM_HB_OFDM_HT40_BAND_1 ((0x1B0)\
| INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 16 bytes */
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/sched.h>
#include <net/mac80211.h>
#include "iwl-dev.h" /* FIXME: remove */
}
spin_unlock_irqrestore(&rxq->lock, flags);
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ priority |= __GFP_NOWARN;
/* Alloc a new receive buffer */
skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
priority);
if (!skb) {
- IWL_CRIT(priv, "Can not allocate SKB buffers\n");
+ if (net_ratelimit())
+ IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
/* We don't reschedule replenish work here -- we will
* call the restock method and if it still needs
* more buffers it will schedule replenish */
* as a bitmask.
*/
rx_status.antenna =
- le16_to_cpu(phy_res->phy_flags & RX_RES_PHY_FLAGS_ANTENNA_MSK)
+ (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
>> RX_RES_PHY_FLAGS_ANTENNA_POS;
/* set the preamble flag if appropriate */
struct iwl_host_cmd cmd = {
.id = REPLY_WEPKEY,
.data = wep_cmd,
- .flags = CMD_SYNC,
+ .flags = CMD_ASYNC,
};
memset(wep_cmd, 0, cmd_size +
*****************************************************************************/
#include <linux/etherdevice.h>
+#include <linux/sched.h>
#include <net/mac80211.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
pci_free_consistent(dev, priv->hw_params.tfd_size *
txq->q.n_bd, txq->tfds, txq->q.dma_addr);
+ /* deallocate arrays */
+ kfree(txq->cmd);
+ kfree(txq->meta);
+ txq->cmd = NULL;
+ txq->meta = NULL;
+
/* 0-fill queue descriptor structure */
memset(txq, 0, sizeof(*txq));
}
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
}
spin_unlock_irqrestore(&rxq->lock, flags);
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ priority |= __GFP_NOWARN;
/* Alloc a new receive buffer */
skb = alloc_skb(priv->hw_params.rx_buf_size, priority);
if (!skb) {
if (net_ratelimit())
- IWL_CRIT(priv, ": Can not allocate SKB buffers\n");
+ IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
/* We don't reschedule replenish work here -- we will
* call the restock method and if it still needs
* more buffers it will schedule replenish */
tasklet_kill(&priv->irq_tasklet);
}
+#ifdef CONFIG_IWLWIFI_DEBUG
static const char *desc_lookup(int i)
{
switch (i) {
#define ERROR_START_OFFSET (1 * sizeof(u32))
#define ERROR_ELEM_SIZE (7 * sizeof(u32))
-static void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
+void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
{
u32 i;
u32 desc, time, count, base, data1;
}
}
-static void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
+void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
{
u32 base; /* SRAM byte address of event log header */
u32 capacity; /* event log capacity in # entries */
iwl3945_print_event_log(priv, 0, next_entry, mode);
}
+#else
+void iwl3945_dump_nic_event_log(struct iwl_priv *priv)
+{
+}
+
+void iwl3945_dump_nic_error_log(struct iwl_priv *priv)
+{
+}
+
+#endif
static void iwl3945_irq_tasklet(struct iwl_priv *priv)
{
static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, dump_error_log);
-static ssize_t dump_event_log(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct iwl_priv *priv = dev_get_drvdata(d);
- char *p = (char *)buf;
-
- if (p[0] == '1')
- iwl3945_dump_nic_event_log(priv);
-
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(dump_events, S_IWUSR, NULL, dump_event_log);
-
/*****************************************************************************
*
* driver setup and tear down
&dev_attr_antenna.attr,
&dev_attr_channels.attr,
&dev_attr_dump_errors.attr,
- &dev_attr_dump_events.attr,
&dev_attr_flags.attr,
&dev_attr_filter_flags.attr,
#ifdef CONFIG_IWL3945_SPECTRUM_MEASUREMENT
pci_set_drvdata(pdev, NULL);
pci_disable_device(pdev);
out_ieee80211_free_hw:
- ieee80211_free_hw(priv->hw);
iwl_free_traffic_mem(priv);
+ ieee80211_free_hw(priv->hw);
out:
return err;
}
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/sched.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
#include <linux/ieee80211.h>
#include <linux/wireless.h>
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
+#include <linux/sched.h>
#include "iwm.h"
#include "bus.h"
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/sched.h>
#include <linux/ieee80211.h>
#include <linux/wireless.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
+#include <linux/sched.h>
#include <linux/etherdevice.h>
#include <linux/wireless.h>
#include <linux/ieee80211.h>
#include <net/iw_handler.h>
#include <net/lib80211.h>
#include <linux/kfifo.h>
+#include <linux/sched.h>
#include "host.h"
#include "hostcmd.h"
#include "decl.h"
* responses as well as events generated by firmware.
*/
#include <linux/delay.h>
+#include <linux/sched.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <asm/unaligned.h>
static int spu_write(struct if_spi_card *card, u16 reg, const u8 *buf, int len)
{
int err = 0;
- u16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
+ __le16 reg_out = cpu_to_le16(reg | IF_SPI_WRITE_OPERATION_MASK);
struct spi_message m;
struct spi_transfer reg_trans;
struct spi_transfer data_trans;
static inline int spu_write_u16(struct if_spi_card *card, u16 reg, u16 val)
{
- u16 buff;
+ __le16 buff;
buff = cpu_to_le16(val);
return spu_write(card, reg, (u8 *)&buff, sizeof(u16));
{
unsigned int delay;
int err = 0;
- u16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
+ __le16 reg_out = cpu_to_le16(reg | IF_SPI_READ_OPERATION_MASK);
struct spi_message m;
struct spi_transfer reg_trans;
struct spi_transfer dummy_trans;
/* Read 16 bits from an SPI register */
static inline int spu_read_u16(struct if_spi_card *card, u16 reg, u16 *val)
{
- u16 buf;
+ __le16 buf;
int ret;
ret = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
* The low 16 bits are read first. */
static int spu_read_u32(struct if_spi_card *card, u16 reg, u32 *val)
{
- u32 buf;
+ __le32 buf;
int err;
err = spu_read(card, reg, (u8 *)&buf, sizeof(buf));
/* Fill the receive configuration URB and initialise the Rx call back */
usb_fill_bulk_urb(cardp->rx_urb, cardp->udev,
usb_rcvbulkpipe(cardp->udev, cardp->ep_in),
- (void *) (skb->tail + (size_t) IPFIELD_ALIGN_OFFSET),
+ skb->data + IPFIELD_ALIGN_OFFSET,
MRVDRV_ETH_RX_PACKET_BUFFER_SIZE, callbackfn,
cardp);
*/
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
+#include <linux/sched.h>
#include "hostcmd.h"
#include "radiotap.h"
data->beacon_int = 1024 * info->beacon_int / 1000 * HZ / 1000;
if (WARN_ON(!data->beacon_int))
data->beacon_int = 1;
+ if (data->started)
+ mod_timer(&data->beacon_timer,
+ jiffies + data->beacon_int);
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
*
*/
+#include <linux/capability.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/pci.h>
+#include <linux/sched.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/if_arp.h>
#include <linux/netdevice.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/sched.h>
#include <asm/io.h>
#include <asm/system.h>
unsigned long count, void *data)
{
static char proc_essid[33];
- int len = count;
+ unsigned int len = count;
if (len > 32)
len = 32;
rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
- (skbdesc->entry->entry_idx + 1) : 0xff);
+ txdesc->key_idx : 0xff);
rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
skb->len - txdesc->l2pad);
rt2x00_set_field32(&word, TXWI_W1_PACKETID,
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/uaccess.h>
#include "rt2x00.h"
{
}
-static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, bool l2pad,
+static inline void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
unsigned int header_length,
struct rxdone_entry_desc *rxdesc)
{
/* Huawei-3Com */
{ USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
/* Hercules */
+ { USB_DEVICE(0x06f8, 0xe002), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
/* Linksys */
{ USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x13b1, 0x0028), USB_DEVICE_DATA(&rt73usb_ops) },
/* MSI */
+ { USB_DEVICE(0x0db0, 0x4600), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* Ovislink */
+ { USB_DEVICE(0x1b75, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
/* Ralink */
{ USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
/* Planex */
{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+ /* WideTell */
+ { USB_DEVICE(0x7167, 0x3840), USB_DEVICE_DATA(&rt73usb_ops) },
/* Zcom */
{ USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
/* ZyXEL */
menuconfig WL12XX
- boolean "TI wl12xx driver support"
+ tristate "TI wl12xx driver support"
depends on MAC80211 && WLAN_80211 && EXPERIMENTAL
---help---
This will enable TI wl12xx driver support. The drivers make
/* Find bulk out endpoint */
endpoint = &iface_desc->endpoint[1].desc;
- if ((endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT &&
+ if (usb_endpoint_dir_out(endpoint) &&
usb_endpoint_xfer_bulk(endpoint)) {
bulk_out_ep = endpoint->bEndpointAddress;
} else {
}
/* Enable the Rx interrupts for the first buffer */
- reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
- reg_data | XEL_RSR_RECV_IE_MASK);
+ XEL_RSR_RECV_IE_MASK);
/* Enable the Rx interrupts for the second Buffer if
* configured in HW */
if (drvdata->rx_ping_pong != 0) {
- reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
- XEL_RSR_OFFSET);
out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
XEL_RSR_OFFSET,
- reg_data | XEL_RSR_RECV_IE_MASK);
+ XEL_RSR_RECV_IE_MASK);
}
/* Enable the Global Interrupt Enable */
static int znet_request_resources (struct net_device *dev)
{
struct znet_private *znet = netdev_priv(dev);
- unsigned long flags;
if (request_irq (dev->irq, &znet_interrupt, 0, "ZNet", dev))
goto failed;
free_sia:
release_region (znet->sia_base, znet->sia_size);
free_tx_dma:
- flags = claim_dma_lock();
free_dma (znet->tx_dma);
- release_dma_lock (flags);
free_rx_dma:
- flags = claim_dma_lock();
free_dma (znet->rx_dma);
- release_dma_lock (flags);
free_irq:
free_irq (dev->irq, dev);
failed:
static void znet_release_resources (struct net_device *dev)
{
struct znet_private *znet = netdev_priv(dev);
- unsigned long flags;
release_region (znet->sia_base, znet->sia_size);
release_region (dev->base_addr, znet->io_size);
- flags = claim_dma_lock();
free_dma (znet->tx_dma);
free_dma (znet->rx_dma);
- release_dma_lock (flags);
free_irq (dev->irq, dev);
}
}
EXPORT_SYMBOL(of_mdiobus_register);
+/* Helper function for of_phy_find_device */
+static int of_phy_match(struct device *dev, void *phy_np)
+{
+ return dev_archdata_get_node(&dev->archdata) == phy_np;
+}
+
/**
* of_phy_find_device - Give a PHY node, find the phy_device
* @phy_np: Pointer to the phy's device tree node
struct phy_device *of_phy_find_device(struct device_node *phy_np)
{
struct device *d;
- int match(struct device *dev, void *phy_np)
- {
- return dev_archdata_get_node(&dev->archdata) == phy_np;
- }
-
if (!phy_np)
return NULL;
- d = bus_find_device(&mdio_bus_type, NULL, phy_np, match);
+ d = bus_find_device(&mdio_bus_type, NULL, phy_np, of_phy_match);
return d ? to_phy_device(d) : NULL;
}
EXPORT_SYMBOL(of_phy_find_device);
{
int err;
- if (!alloc_cpumask_var(&marked_cpus, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&marked_cpus, GFP_KERNEL))
return -ENOMEM;
- cpumask_clear(marked_cpus);
start_cpu_work();
/* atomic_t because wait_event checks it outside of buffer_mutex */
static atomic_t buffer_ready = ATOMIC_INIT(0);
-/* Add an entry to the event buffer. When we
- * get near to the end we wake up the process
- * sleeping on the read() of the file.
+/*
+ * Add an entry to the event buffer. When we get near to the end we
+ * wake up the process sleeping on the read() of the file. To protect
+ * the event_buffer this function may only be called when buffer_mutex
+ * is set.
*/
void add_event_entry(unsigned long value)
{
+ /*
+ * This shouldn't happen since all workqueues or handlers are
+ * canceled or flushed before the event buffer is freed.
+ */
+ if (!event_buffer) {
+ WARN_ON_ONCE(1);
+ return;
+ }
+
if (buffer_pos == buffer_size) {
atomic_inc(&oprofile_stats.event_lost_overflow);
return;
int alloc_event_buffer(void)
{
- int err = -ENOMEM;
unsigned long flags;
spin_lock_irqsave(&oprofilefs_lock, flags);
if (buffer_watershed >= buffer_size)
return -EINVAL;
+ buffer_pos = 0;
event_buffer = vmalloc(sizeof(unsigned long) * buffer_size);
if (!event_buffer)
- goto out;
+ return -ENOMEM;
- err = 0;
-out:
- return err;
+ return 0;
}
void free_event_buffer(void)
{
+ mutex_lock(&buffer_mutex);
vfree(event_buffer);
-
+ buffer_pos = 0;
event_buffer = NULL;
+ mutex_unlock(&buffer_mutex);
}
mutex_lock(&buffer_mutex);
+ /* May happen if the buffer is freed during pending reads. */
+ if (!event_buffer) {
+ retval = -EINTR;
+ goto out;
+ }
+
atomic_set(&buffer_ready, 0);
retval = -EFAULT;
#define PARPORT_MIN_SPINTIME_VALUE 1
#define PARPORT_MAX_SPINTIME_VALUE 1000
-static int do_active_device(ctl_table *table, int write, struct file *filp,
+static int do_active_device(ctl_table *table, int write,
void __user *result, size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
}
#ifdef CONFIG_PARPORT_1284
-static int do_autoprobe(ctl_table *table, int write, struct file *filp,
+static int do_autoprobe(ctl_table *table, int write,
void __user *result, size_t *lenp, loff_t *ppos)
{
struct parport_device_info *info = table->extra2;
#endif /* IEEE1284.3 support. */
static int do_hardware_base_addr (ctl_table *table, int write,
- struct file *filp, void __user *result,
+ void __user *result,
size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
}
static int do_hardware_irq (ctl_table *table, int write,
- struct file *filp, void __user *result,
+ void __user *result,
size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
}
static int do_hardware_dma (ctl_table *table, int write,
- struct file *filp, void __user *result,
+ void __user *result,
size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
}
static int do_hardware_modes (ctl_table *table, int write,
- struct file *filp, void __user *result,
+ void __user *result,
size_t *lenp, loff_t *ppos)
{
struct parport *port = (struct parport *)table->extra1;
struct acpi_dmar_hardware_unit *drhd;
struct acpi_dmar_reserved_memory *rmrr;
struct acpi_dmar_atsr *atsr;
+ struct acpi_dmar_rhsa *rhsa;
switch (header->type) {
case ACPI_DMAR_TYPE_HARDWARE_UNIT:
atsr = container_of(header, struct acpi_dmar_atsr, header);
printk(KERN_INFO PREFIX "ATSR flags: %#x\n", atsr->flags);
break;
+ case ACPI_DMAR_HARDWARE_AFFINITY:
+ rhsa = container_of(header, struct acpi_dmar_rhsa, header);
+ printk(KERN_INFO PREFIX "RHSA base: %#016Lx proximity domain: %#x\n",
+ (unsigned long long)rhsa->base_address,
+ rhsa->proximity_domain);
+ break;
}
}
ret = dmar_parse_one_atsr(entry_header);
#endif
break;
+ case ACPI_DMAR_HARDWARE_AFFINITY:
+ /* We don't do anything with RHSA (yet?) */
+ break;
default:
printk(KERN_WARNING PREFIX
- "Unknown DMAR structure type\n");
+ "Unknown DMAR structure type %d\n",
+ entry_header->type);
ret = 0; /* for forward compatibility */
break;
}
__func__, status);
return retval;
}
- info->hardware_id.string[sizeof(info->hardware_id.length) - 1] = '\0';
if (info->current_status && (info->valid & ACPI_VALID_HID) &&
(!strcmp(info->hardware_id.string, IBM_HARDWARE_ID1) ||
#include <asm/io.h> /* for read? and write? functions */
#include <linux/delay.h> /* for delays */
#include <linux/mutex.h>
+#include <linux/sched.h> /* for signal_pending() */
#define MY_NAME "cpqphp"
#define SLOT_NAME_SIZE 10
struct slot {
- u8 bus;
- u8 device;
u8 state;
- u8 hp_slot;
- u32 number;
struct controller *ctrl;
- struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
- struct list_head slot_list;
struct delayed_work work; /* work for button event */
struct mutex lock;
};
};
struct controller {
- struct mutex crit_sect; /* critical section mutex */
struct mutex ctrl_lock; /* controller lock */
- int num_slots; /* Number of slots on ctlr */
- int slot_num_inc; /* 1 or -1 */
- struct pci_dev *pci_dev;
struct pcie_device *pcie; /* PCI Express port service */
- struct list_head slot_list;
- struct hpc_ops *hpc_ops;
+ struct slot *slot;
wait_queue_head_t queue; /* sleep & wake process */
- u8 slot_device_offset;
- u32 first_slot; /* First physical slot number */ /* PCIE only has 1 slot */
- u8 slot_bus; /* Bus where the slots handled by this controller sit */
u32 slot_cap;
u8 cap_base;
struct timer_list poll_timer;
#define POWERON_STATE 3
#define POWEROFF_STATE 4
-/* Error messages */
-#define INTERLOCK_OPEN 0x00000002
-#define ADD_NOT_SUPPORTED 0x00000003
-#define CARD_FUNCTIONING 0x00000005
-#define ADAPTER_NOT_SAME 0x00000006
-#define NO_ADAPTER_PRESENT 0x00000009
-#define NOT_ENOUGH_RESOURCES 0x0000000B
-#define DEVICE_TYPE_NOT_SUPPORTED 0x0000000C
-#define WRONG_BUS_FREQUENCY 0x0000000D
-#define POWER_FAILURE 0x0000000E
-
-/* Field definitions in Slot Capabilities Register */
-#define ATTN_BUTTN_PRSN 0x00000001
-#define PWR_CTRL_PRSN 0x00000002
-#define MRL_SENS_PRSN 0x00000004
-#define ATTN_LED_PRSN 0x00000008
-#define PWR_LED_PRSN 0x00000010
-#define HP_SUPR_RM_SUP 0x00000020
-#define EMI_PRSN 0x00020000
-#define NO_CMD_CMPL_SUP 0x00040000
-
-#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
-#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN)
-#define MRL_SENS(ctrl) ((ctrl)->slot_cap & MRL_SENS_PRSN)
-#define ATTN_LED(ctrl) ((ctrl)->slot_cap & ATTN_LED_PRSN)
-#define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN)
-#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP)
-#define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN)
-#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
+#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_ABP)
+#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PCP)
+#define MRL_SENS(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_MRLSP)
+#define ATTN_LED(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_AIP)
+#define PWR_LED(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_PIP)
+#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_HPS)
+#define EMI(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_EIP)
+#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & PCI_EXP_SLTCAP_NCCS)
+#define PSN(ctrl) ((ctrl)->slot_cap >> 19)
extern int pciehp_sysfs_enable_slot(struct slot *slot);
extern int pciehp_sysfs_disable_slot(struct slot *slot);
extern u8 pciehp_handle_attention_button(struct slot *p_slot);
- extern u8 pciehp_handle_switch_change(struct slot *p_slot);
+extern u8 pciehp_handle_switch_change(struct slot *p_slot);
extern u8 pciehp_handle_presence_change(struct slot *p_slot);
extern u8 pciehp_handle_power_fault(struct slot *p_slot);
extern int pciehp_configure_device(struct slot *p_slot);
int pciehp_enable_slot(struct slot *p_slot);
int pciehp_disable_slot(struct slot *p_slot);
int pcie_enable_notification(struct controller *ctrl);
+int pciehp_power_on_slot(struct slot *slot);
+int pciehp_power_off_slot(struct slot *slot);
+int pciehp_get_power_status(struct slot *slot, u8 *status);
+int pciehp_get_attention_status(struct slot *slot, u8 *status);
+
+int pciehp_set_attention_status(struct slot *slot, u8 status);
+int pciehp_get_latch_status(struct slot *slot, u8 *status);
+int pciehp_get_adapter_status(struct slot *slot, u8 *status);
+int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *speed);
+int pciehp_get_max_link_width(struct slot *slot, enum pcie_link_width *val);
+int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *speed);
+int pciehp_get_cur_link_width(struct slot *slot, enum pcie_link_width *val);
+int pciehp_query_power_fault(struct slot *slot);
+void pciehp_green_led_on(struct slot *slot);
+void pciehp_green_led_off(struct slot *slot);
+void pciehp_green_led_blink(struct slot *slot);
+int pciehp_check_link_status(struct controller *ctrl);
+void pciehp_release_ctrl(struct controller *ctrl);
static inline const char *slot_name(struct slot *slot)
{
return hotplug_slot_name(slot->hotplug_slot);
}
-static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
-{
- struct slot *slot;
-
- list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
- if (slot->device == device)
- return slot;
- }
-
- ctrl_err(ctrl, "Slot (device=0x%02x) not found\n", device);
- return NULL;
-}
-
-struct hpc_ops {
- int (*power_on_slot)(struct slot *slot);
- int (*power_off_slot)(struct slot *slot);
- int (*get_power_status)(struct slot *slot, u8 *status);
- int (*get_attention_status)(struct slot *slot, u8 *status);
- int (*set_attention_status)(struct slot *slot, u8 status);
- int (*get_latch_status)(struct slot *slot, u8 *status);
- int (*get_adapter_status)(struct slot *slot, u8 *status);
- int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
- int (*get_max_lnk_width)(struct slot *slot, enum pcie_link_width *val);
- int (*get_cur_lnk_width)(struct slot *slot, enum pcie_link_width *val);
- int (*query_power_fault)(struct slot *slot);
- void (*green_led_on)(struct slot *slot);
- void (*green_led_off)(struct slot *slot);
- void (*green_led_blink)(struct slot *slot);
- void (*release_ctlr)(struct controller *ctrl);
- int (*check_lnk_status)(struct controller *ctrl);
-};
-
#ifdef CONFIG_ACPI
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#define PCIEHP_DETECT_AUTO (2)
#define PCIEHP_DETECT_DEFAULT PCIEHP_DETECT_AUTO
+struct dummy_slot {
+ u32 number;
+ struct list_head list;
+};
+
static int slot_detection_mode;
static char *pciehp_detect_mode;
module_param(pciehp_detect_mode, charp, 0444);
int pos;
u32 slot_cap;
acpi_handle handle;
- struct slot *slot, *tmp;
+ struct dummy_slot *slot, *tmp;
struct pci_dev *pdev = dev->port;
/* Note: pciehp_detect_mode != PCIEHP_DETECT_ACPI here */
if (pciehp_get_hp_hw_control_from_firmware(pdev))
if (!slot)
return -ENOMEM;
slot->number = slot_cap >> 19;
- list_for_each_entry(tmp, &dummy_slots, slot_list) {
+ list_for_each_entry(tmp, &dummy_slots, list) {
if (tmp->number == slot->number)
dup_slot_id++;
}
- list_add_tail(&slot->slot_list, &dummy_slots);
+ list_add_tail(&slot->list, &dummy_slots);
handle = DEVICE_ACPI_HANDLE(&pdev->dev);
if (!acpi_slot_detected && acpi_pci_detect_ejectable(handle))
acpi_slot_detected = 1;
static int __init select_detection_mode(void)
{
- struct slot *slot, *tmp;
+ struct dummy_slot *slot, *tmp;
pcie_port_service_register(&dummy_driver);
pcie_port_service_unregister(&dummy_driver);
- list_for_each_entry_safe(slot, tmp, &dummy_slots, slot_list) {
- list_del(&slot->slot_list);
+ list_for_each_entry_safe(slot, tmp, &dummy_slots, list) {
+ list_del(&slot->list);
kfree(slot);
}
if (acpi_slot_detected && dup_slot_id)
kfree(hotplug_slot);
}
-static int init_slots(struct controller *ctrl)
+static int init_slot(struct controller *ctrl)
{
- struct slot *slot;
- struct hotplug_slot *hotplug_slot;
- struct hotplug_slot_info *info;
+ struct slot *slot = ctrl->slot;
+ struct hotplug_slot *hotplug = NULL;
+ struct hotplug_slot_info *info = NULL;
char name[SLOT_NAME_SIZE];
int retval = -ENOMEM;
- list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
- hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
- if (!hotplug_slot)
- goto error;
-
- info = kzalloc(sizeof(*info), GFP_KERNEL);
- if (!info)
- goto error_hpslot;
-
- /* register this slot with the hotplug pci core */
- hotplug_slot->info = info;
- hotplug_slot->private = slot;
- hotplug_slot->release = &release_slot;
- hotplug_slot->ops = &pciehp_hotplug_slot_ops;
- slot->hotplug_slot = hotplug_slot;
- snprintf(name, SLOT_NAME_SIZE, "%u", slot->number);
-
- ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:%02x "
- "hp_slot=%x sun=%x slot_device_offset=%x\n",
- pci_domain_nr(ctrl->pci_dev->subordinate),
- slot->bus, slot->device, slot->hp_slot, slot->number,
- ctrl->slot_device_offset);
- retval = pci_hp_register(hotplug_slot,
- ctrl->pci_dev->subordinate,
- slot->device,
- name);
- if (retval) {
- ctrl_err(ctrl, "pci_hp_register failed with error %d\n",
- retval);
- goto error_info;
- }
- get_power_status(hotplug_slot, &info->power_status);
- get_attention_status(hotplug_slot, &info->attention_status);
- get_latch_status(hotplug_slot, &info->latch_status);
- get_adapter_status(hotplug_slot, &info->adapter_status);
+ hotplug = kzalloc(sizeof(*hotplug), GFP_KERNEL);
+ if (!hotplug)
+ goto out;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ goto out;
+
+ /* register this slot with the hotplug pci core */
+ hotplug->info = info;
+ hotplug->private = slot;
+ hotplug->release = &release_slot;
+ hotplug->ops = &pciehp_hotplug_slot_ops;
+ slot->hotplug_slot = hotplug;
+ snprintf(name, SLOT_NAME_SIZE, "%u", PSN(ctrl));
+
+ ctrl_dbg(ctrl, "Registering domain:bus:dev=%04x:%02x:00 sun=%x\n",
+ pci_domain_nr(ctrl->pcie->port->subordinate),
+ ctrl->pcie->port->subordinate->number, PSN(ctrl));
+ retval = pci_hp_register(hotplug,
+ ctrl->pcie->port->subordinate, 0, name);
+ if (retval) {
+ ctrl_err(ctrl,
+ "pci_hp_register failed with error %d\n", retval);
+ goto out;
+ }
+ get_power_status(hotplug, &info->power_status);
+ get_attention_status(hotplug, &info->attention_status);
+ get_latch_status(hotplug, &info->latch_status);
+ get_adapter_status(hotplug, &info->adapter_status);
+out:
+ if (retval) {
+ kfree(info);
+ kfree(hotplug);
}
-
- return 0;
-error_info:
- kfree(info);
-error_hpslot:
- kfree(hotplug_slot);
-error:
return retval;
}
-static void cleanup_slots(struct controller *ctrl)
+static void cleanup_slot(struct controller *ctrl)
{
- struct slot *slot;
- list_for_each_entry(slot, &ctrl->slot_list, slot_list)
- pci_hp_deregister(slot->hotplug_slot);
+ pci_hp_deregister(ctrl->slot->hotplug_slot);
}
/*
hotplug_slot->info->attention_status = status;
if (ATTN_LED(slot->ctrl))
- slot->hpc_ops->set_attention_status(slot, status);
+ pciehp_set_attention_status(slot, status);
return 0;
}
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_power_status(slot, value);
+ retval = pciehp_get_power_status(slot, value);
if (retval < 0)
*value = hotplug_slot->info->power_status;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_attention_status(slot, value);
+ retval = pciehp_get_attention_status(slot, value);
if (retval < 0)
*value = hotplug_slot->info->attention_status;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_latch_status(slot, value);
+ retval = pciehp_get_latch_status(slot, value);
if (retval < 0)
*value = hotplug_slot->info->latch_status;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_adapter_status(slot, value);
+ retval = pciehp_get_adapter_status(slot, value);
if (retval < 0)
*value = hotplug_slot->info->adapter_status;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_max_bus_speed(slot, value);
+ retval = pciehp_get_max_link_speed(slot, value);
if (retval < 0)
*value = PCI_SPEED_UNKNOWN;
ctrl_dbg(slot->ctrl, "%s: physical_slot = %s\n",
__func__, slot_name(slot));
- retval = slot->hpc_ops->get_cur_bus_speed(slot, value);
+ retval = pciehp_get_cur_link_speed(slot, value);
if (retval < 0)
*value = PCI_SPEED_UNKNOWN;
{
int rc;
struct controller *ctrl;
- struct slot *t_slot;
+ struct slot *slot;
u8 value;
struct pci_dev *pdev = dev->port;
set_service_data(dev, ctrl);
/* Setup the slot information structures */
- rc = init_slots(ctrl);
+ rc = init_slot(ctrl);
if (rc) {
if (rc == -EBUSY)
ctrl_warn(ctrl, "Slot already registered by another "
}
/* Check if slot is occupied */
- t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
- t_slot->hpc_ops->get_adapter_status(t_slot, &value);
+ slot = ctrl->slot;
+ pciehp_get_adapter_status(slot, &value);
if (value) {
if (pciehp_force)
- pciehp_enable_slot(t_slot);
+ pciehp_enable_slot(slot);
} else {
/* Power off slot if not occupied */
if (POWER_CTRL(ctrl)) {
- rc = t_slot->hpc_ops->power_off_slot(t_slot);
+ rc = pciehp_power_off_slot(slot);
if (rc)
goto err_out_free_ctrl_slot;
}
return 0;
err_out_free_ctrl_slot:
- cleanup_slots(ctrl);
+ cleanup_slot(ctrl);
err_out_release_ctlr:
- ctrl->hpc_ops->release_ctlr(ctrl);
+ pciehp_release_ctrl(ctrl);
err_out_none:
return -ENODEV;
}
-static void pciehp_remove (struct pcie_device *dev)
+static void pciehp_remove(struct pcie_device *dev)
{
struct controller *ctrl = get_service_data(dev);
- cleanup_slots(ctrl);
- ctrl->hpc_ops->release_ctlr(ctrl);
+ cleanup_slot(ctrl);
+ pciehp_release_ctrl(ctrl);
}
#ifdef CONFIG_PM
dev_info(&dev->device, "%s ENTRY\n", __func__);
if (pciehp_force) {
struct controller *ctrl = get_service_data(dev);
- struct slot *t_slot;
+ struct slot *slot;
u8 status;
/* reinitialize the chipset's event detection logic */
pcie_enable_notification(ctrl);
- t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+ slot = ctrl->slot;
/* Check if slot is occupied */
- t_slot->hpc_ops->get_adapter_status(t_slot, &status);
+ pciehp_get_adapter_status(slot, &status);
if (status)
- pciehp_enable_slot(t_slot);
+ pciehp_enable_slot(slot);
else
- pciehp_disable_slot(t_slot);
+ pciehp_disable_slot(slot);
}
return 0;
}
/* Switch Change */
ctrl_dbg(ctrl, "Switch interrupt received\n");
- p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ pciehp_get_latch_status(p_slot, &getstatus);
if (getstatus) {
/*
* Switch opened
/* Switch is open, assume a presence change
* Save the presence state
*/
- p_slot->hpc_ops->get_adapter_status(p_slot, &presence_save);
+ pciehp_get_adapter_status(p_slot, &presence_save);
if (presence_save) {
/*
* Card Present
/* power fault */
ctrl_dbg(ctrl, "Power fault interrupt received\n");
- if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
+ if (!pciehp_query_power_fault(p_slot)) {
/*
* power fault Cleared
*/
{
/* turn off slot, turn on Amber LED, turn off Green LED if supported*/
if (POWER_CTRL(ctrl)) {
- if (pslot->hpc_ops->power_off_slot(pslot)) {
+ if (pciehp_power_off_slot(pslot)) {
ctrl_err(ctrl,
"Issue of Slot Power Off command failed\n");
return;
}
if (PWR_LED(ctrl))
- pslot->hpc_ops->green_led_off(pslot);
+ pciehp_green_led_off(pslot);
if (ATTN_LED(ctrl)) {
- if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
+ if (pciehp_set_attention_status(pslot, 1)) {
ctrl_err(ctrl,
"Issue of Set Attention Led command failed\n");
return;
{
int retval = 0;
struct controller *ctrl = p_slot->ctrl;
- struct pci_bus *parent = ctrl->pci_dev->subordinate;
-
- ctrl_dbg(ctrl, "%s: slot device, slot offset, hp slot = %d, %d, %d\n",
- __func__, p_slot->device, ctrl->slot_device_offset,
- p_slot->hp_slot);
+ struct pci_bus *parent = ctrl->pcie->port->subordinate;
if (POWER_CTRL(ctrl)) {
/* Power on slot */
- retval = p_slot->hpc_ops->power_on_slot(p_slot);
+ retval = pciehp_power_on_slot(p_slot);
if (retval)
return retval;
}
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_blink(p_slot);
+ pciehp_green_led_blink(p_slot);
/* Check link training status */
- retval = p_slot->hpc_ops->check_lnk_status(ctrl);
+ retval = pciehp_check_link_status(ctrl);
if (retval) {
ctrl_err(ctrl, "Failed to check link status\n");
set_slot_off(ctrl, p_slot);
}
/* Check for a power fault */
- if (p_slot->hpc_ops->query_power_fault(p_slot)) {
+ if (pciehp_query_power_fault(p_slot)) {
ctrl_dbg(ctrl, "Power fault detected\n");
- retval = POWER_FAILURE;
+ retval = -EIO;
goto err_exit;
}
retval = pciehp_configure_device(p_slot);
if (retval) {
- ctrl_err(ctrl, "Cannot add device at %04x:%02x:%02x\n",
- pci_domain_nr(parent), p_slot->bus, p_slot->device);
+ ctrl_err(ctrl, "Cannot add device at %04x:%02x:00\n",
+ pci_domain_nr(parent), parent->number);
goto err_exit;
}
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_on(p_slot);
+ pciehp_green_led_on(p_slot);
return 0;
if (retval)
return retval;
- ctrl_dbg(ctrl, "%s: hp_slot = %d\n", __func__, p_slot->hp_slot);
-
if (POWER_CTRL(ctrl)) {
/* power off slot */
- retval = p_slot->hpc_ops->power_off_slot(p_slot);
+ retval = pciehp_power_off_slot(p_slot);
if (retval) {
ctrl_err(ctrl,
"Issue of Slot Disable command failed\n");
msleep(1000);
}
+ /* turn off Green LED */
if (PWR_LED(ctrl))
- /* turn off Green LED */
- p_slot->hpc_ops->green_led_off(p_slot);
+ pciehp_green_led_off(p_slot);
return 0;
}
case POWEROFF_STATE:
mutex_unlock(&p_slot->lock);
ctrl_dbg(p_slot->ctrl,
- "Disabling domain:bus:device=%04x:%02x:%02x\n",
- pci_domain_nr(p_slot->ctrl->pci_dev->subordinate),
- p_slot->bus, p_slot->device);
+ "Disabling domain:bus:device=%04x:%02x:00\n",
+ pci_domain_nr(p_slot->ctrl->pcie->port->subordinate),
+ p_slot->ctrl->pcie->port->subordinate->number);
pciehp_disable_slot(p_slot);
mutex_lock(&p_slot->lock);
p_slot->state = STATIC_STATE;
break;
case POWERON_STATE:
mutex_unlock(&p_slot->lock);
- if (pciehp_enable_slot(p_slot) &&
- PWR_LED(p_slot->ctrl))
- p_slot->hpc_ops->green_led_off(p_slot);
+ if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl))
+ pciehp_green_led_off(p_slot);
mutex_lock(&p_slot->lock);
p_slot->state = STATIC_STATE;
break;
if (!info)
return -ENOMEM;
- slot->hpc_ops->get_power_status(slot, &(info->power_status));
- slot->hpc_ops->get_attention_status(slot, &(info->attention_status));
- slot->hpc_ops->get_latch_status(slot, &(info->latch_status));
- slot->hpc_ops->get_adapter_status(slot, &(info->adapter_status));
+ pciehp_get_power_status(slot, &info->power_status);
+ pciehp_get_attention_status(slot, &info->attention_status);
+ pciehp_get_latch_status(slot, &info->latch_status);
+ pciehp_get_adapter_status(slot, &info->adapter_status);
result = pci_hp_change_slot_info(slot->hotplug_slot, info);
kfree (info);
switch (p_slot->state) {
case STATIC_STATE:
- p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ pciehp_get_power_status(p_slot, &getstatus);
if (getstatus) {
p_slot->state = BLINKINGOFF_STATE;
ctrl_info(ctrl,
}
/* blink green LED and turn off amber */
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_blink(p_slot);
+ pciehp_green_led_blink(p_slot);
if (ATTN_LED(ctrl))
- p_slot->hpc_ops->set_attention_status(p_slot, 0);
+ pciehp_set_attention_status(p_slot, 0);
schedule_delayed_work(&p_slot->work, 5*HZ);
break;
cancel_delayed_work(&p_slot->work);
if (p_slot->state == BLINKINGOFF_STATE) {
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_on(p_slot);
+ pciehp_green_led_on(p_slot);
} else {
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_off(p_slot);
+ pciehp_green_led_off(p_slot);
}
if (ATTN_LED(ctrl))
- p_slot->hpc_ops->set_attention_status(p_slot, 0);
+ pciehp_set_attention_status(p_slot, 0);
ctrl_info(ctrl, "PCI slot #%s - action canceled "
"due to button press\n", slot_name(p_slot));
p_slot->state = STATIC_STATE;
info->p_slot = p_slot;
INIT_WORK(&info->work, pciehp_power_thread);
- p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ pciehp_get_adapter_status(p_slot, &getstatus);
if (!getstatus)
p_slot->state = POWEROFF_STATE;
else
if (!POWER_CTRL(ctrl))
break;
if (ATTN_LED(ctrl))
- p_slot->hpc_ops->set_attention_status(p_slot, 1);
+ pciehp_set_attention_status(p_slot, 1);
if (PWR_LED(ctrl))
- p_slot->hpc_ops->green_led_off(p_slot);
+ pciehp_green_led_off(p_slot);
break;
case INT_PRESENCE_ON:
case INT_PRESENCE_OFF:
int rc;
struct controller *ctrl = p_slot->ctrl;
- /* Check to see if (latch closed, card present, power off) */
- mutex_lock(&p_slot->ctrl->crit_sect);
-
- rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ rc = pciehp_get_adapter_status(p_slot, &getstatus);
if (rc || !getstatus) {
ctrl_info(ctrl, "No adapter on slot(%s)\n", slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
if (MRL_SENS(p_slot->ctrl)) {
- rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ rc = pciehp_get_latch_status(p_slot, &getstatus);
if (rc || getstatus) {
ctrl_info(ctrl, "Latch open on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
}
if (POWER_CTRL(p_slot->ctrl)) {
- rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ rc = pciehp_get_power_status(p_slot, &getstatus);
if (rc || getstatus) {
ctrl_info(ctrl, "Already enabled on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
}
- p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ pciehp_get_latch_status(p_slot, &getstatus);
rc = board_added(p_slot);
if (rc) {
- p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ pciehp_get_latch_status(p_slot, &getstatus);
}
update_slot_info(p_slot);
- mutex_unlock(&p_slot->ctrl->crit_sect);
return rc;
}
if (!p_slot->ctrl)
return 1;
- /* Check to see if (latch closed, card present, power on) */
- mutex_lock(&p_slot->ctrl->crit_sect);
-
if (!HP_SUPR_RM(p_slot->ctrl)) {
- ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus);
+ ret = pciehp_get_adapter_status(p_slot, &getstatus);
if (ret || !getstatus) {
ctrl_info(ctrl, "No adapter on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
}
if (MRL_SENS(p_slot->ctrl)) {
- ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
+ ret = pciehp_get_latch_status(p_slot, &getstatus);
if (ret || getstatus) {
ctrl_info(ctrl, "Latch open on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -ENODEV;
}
}
if (POWER_CTRL(p_slot->ctrl)) {
- ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus);
+ ret = pciehp_get_power_status(p_slot, &getstatus);
if (ret || !getstatus) {
ctrl_info(ctrl, "Already disabled on slot(%s)\n",
slot_name(p_slot));
- mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
}
ret = remove_board(p_slot);
update_slot_info(p_slot);
- mutex_unlock(&p_slot->ctrl->crit_sect);
return ret;
}
static inline int pciehp_readw(struct controller *ctrl, int reg, u16 *value)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
return pci_read_config_word(dev, ctrl->cap_base + reg, value);
}
static inline int pciehp_readl(struct controller *ctrl, int reg, u32 *value)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
return pci_read_config_dword(dev, ctrl->cap_base + reg, value);
}
static inline int pciehp_writew(struct controller *ctrl, int reg, u16 value)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
return pci_write_config_word(dev, ctrl->cap_base + reg, value);
}
static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
return pci_write_config_dword(dev, ctrl->cap_base + reg, value);
}
ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n");
}
-static int hpc_check_lnk_status(struct controller *ctrl)
+int pciehp_check_link_status(struct controller *ctrl)
{
u16 lnk_status;
int retval = 0;
return retval;
}
-static int hpc_get_attention_status(struct slot *slot, u8 *status)
+int pciehp_get_attention_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
u16 slot_ctrl;
return 0;
}
-static int hpc_get_power_status(struct slot *slot, u8 *status)
+int pciehp_get_power_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
u16 slot_ctrl;
return retval;
}
-static int hpc_get_latch_status(struct slot *slot, u8 *status)
+int pciehp_get_latch_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
u16 slot_status;
return 0;
}
-static int hpc_get_adapter_status(struct slot *slot, u8 *status)
+int pciehp_get_adapter_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
u16 slot_status;
return 0;
}
-static int hpc_query_power_fault(struct slot *slot)
+int pciehp_query_power_fault(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_status;
return !!(slot_status & PCI_EXP_SLTSTA_PFD);
}
-static int hpc_set_attention_status(struct slot *slot, u8 value)
+int pciehp_set_attention_status(struct slot *slot, u8 value)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
return rc;
}
-static void hpc_set_green_led_on(struct slot *slot)
+void pciehp_green_led_on(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
}
-static void hpc_set_green_led_off(struct slot *slot)
+void pciehp_green_led_off(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
}
-static void hpc_set_green_led_blink(struct slot *slot)
+void pciehp_green_led_blink(struct slot *slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
}
-static int hpc_power_on_slot(struct slot * slot)
+int pciehp_power_on_slot(struct slot * slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
u16 slot_status;
int retval = 0;
- ctrl_dbg(ctrl, "%s: slot->hp_slot %x\n", __func__, slot->hp_slot);
-
/* Clear sticky power-fault bit from previous power failures */
retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
if (retval) {
static inline int pcie_mask_bad_dllp(struct controller *ctrl)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
int pos;
u32 reg;
static inline void pcie_unmask_bad_dllp(struct controller *ctrl)
{
- struct pci_dev *dev = ctrl->pci_dev;
+ struct pci_dev *dev = ctrl->pcie->port;
u32 reg;
int pos;
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg);
}
-static int hpc_power_off_slot(struct slot * slot)
+int pciehp_power_off_slot(struct slot * slot)
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
int retval = 0;
int changed;
- ctrl_dbg(ctrl, "%s: slot->hp_slot %x\n", __func__, slot->hp_slot);
-
/*
* Set Bad DLLP Mask bit in Correctable Error Mask
* Register. This is the workaround against Bad DLLP error
static irqreturn_t pcie_isr(int irq, void *dev_id)
{
struct controller *ctrl = (struct controller *)dev_id;
+ struct slot *slot = ctrl->slot;
u16 detected, intr_loc;
- struct slot *p_slot;
/*
* In order to guarantee that all interrupt events are
if (!(intr_loc & ~PCI_EXP_SLTSTA_CC))
return IRQ_HANDLED;
- p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
-
/* Check MRL Sensor Changed */
if (intr_loc & PCI_EXP_SLTSTA_MRLSC)
- pciehp_handle_switch_change(p_slot);
+ pciehp_handle_switch_change(slot);
/* Check Attention Button Pressed */
if (intr_loc & PCI_EXP_SLTSTA_ABP)
- pciehp_handle_attention_button(p_slot);
+ pciehp_handle_attention_button(slot);
/* Check Presence Detect Changed */
if (intr_loc & PCI_EXP_SLTSTA_PDC)
- pciehp_handle_presence_change(p_slot);
+ pciehp_handle_presence_change(slot);
/* Check Power Fault Detected */
if ((intr_loc & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
ctrl->power_fault_detected = 1;
- pciehp_handle_power_fault(p_slot);
+ pciehp_handle_power_fault(slot);
}
return IRQ_HANDLED;
}
-static int hpc_get_max_lnk_speed(struct slot *slot, enum pci_bus_speed *value)
+int pciehp_get_max_link_speed(struct slot *slot, enum pci_bus_speed *value)
{
struct controller *ctrl = slot->ctrl;
enum pcie_link_speed lnk_speed;
return retval;
}
-static int hpc_get_max_lnk_width(struct slot *slot,
+int pciehp_get_max_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
struct controller *ctrl = slot->ctrl;
return retval;
}
-static int hpc_get_cur_lnk_speed(struct slot *slot, enum pci_bus_speed *value)
+int pciehp_get_cur_link_speed(struct slot *slot, enum pci_bus_speed *value)
{
struct controller *ctrl = slot->ctrl;
enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
return retval;
}
-static int hpc_get_cur_lnk_width(struct slot *slot,
+int pciehp_get_cur_lnk_width(struct slot *slot,
enum pcie_link_width *value)
{
struct controller *ctrl = slot->ctrl;
return retval;
}
-static void pcie_release_ctrl(struct controller *ctrl);
-static struct hpc_ops pciehp_hpc_ops = {
- .power_on_slot = hpc_power_on_slot,
- .power_off_slot = hpc_power_off_slot,
- .set_attention_status = hpc_set_attention_status,
- .get_power_status = hpc_get_power_status,
- .get_attention_status = hpc_get_attention_status,
- .get_latch_status = hpc_get_latch_status,
- .get_adapter_status = hpc_get_adapter_status,
-
- .get_max_bus_speed = hpc_get_max_lnk_speed,
- .get_cur_bus_speed = hpc_get_cur_lnk_speed,
- .get_max_lnk_width = hpc_get_max_lnk_width,
- .get_cur_lnk_width = hpc_get_cur_lnk_width,
-
- .query_power_fault = hpc_query_power_fault,
- .green_led_on = hpc_set_green_led_on,
- .green_led_off = hpc_set_green_led_off,
- .green_led_blink = hpc_set_green_led_blink,
-
- .release_ctlr = pcie_release_ctrl,
- .check_lnk_status = hpc_check_lnk_status,
-};
-
int pcie_enable_notification(struct controller *ctrl)
{
u16 cmd, mask;
if (!slot)
return -ENOMEM;
- slot->hp_slot = 0;
slot->ctrl = ctrl;
- slot->bus = ctrl->pci_dev->subordinate->number;
- slot->device = ctrl->slot_device_offset + slot->hp_slot;
- slot->hpc_ops = ctrl->hpc_ops;
- slot->number = ctrl->first_slot;
mutex_init(&slot->lock);
INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
- list_add(&slot->slot_list, &ctrl->slot_list);
+ ctrl->slot = slot;
return 0;
}
static void pcie_cleanup_slot(struct controller *ctrl)
{
- struct slot *slot;
- slot = list_first_entry(&ctrl->slot_list, struct slot, slot_list);
- list_del(&slot->slot_list);
+ struct slot *slot = ctrl->slot;
cancel_delayed_work(&slot->work);
flush_scheduled_work();
flush_workqueue(pciehp_wq);
{
int i;
u16 reg16;
- struct pci_dev *pdev = ctrl->pci_dev;
+ struct pci_dev *pdev = ctrl->pcie->port;
if (!pciehp_debug)
return;
(unsigned long long)pci_resource_start(pdev, i));
}
ctrl_info(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
- ctrl_info(ctrl, " Physical Slot Number : %d\n", ctrl->first_slot);
+ ctrl_info(ctrl, " Physical Slot Number : %d\n", PSN(ctrl));
ctrl_info(ctrl, " Attention Button : %3s\n",
ATTN_BUTTN(ctrl) ? "yes" : "no");
ctrl_info(ctrl, " Power Controller : %3s\n",
dev_err(&dev->device, "%s: Out of memory\n", __func__);
goto abort;
}
- INIT_LIST_HEAD(&ctrl->slot_list);
-
ctrl->pcie = dev;
- ctrl->pci_dev = pdev;
ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (!ctrl->cap_base) {
ctrl_err(ctrl, "Cannot find PCI Express capability\n");
}
ctrl->slot_cap = slot_cap;
- ctrl->first_slot = slot_cap >> 19;
- ctrl->slot_device_offset = 0;
- ctrl->num_slots = 1;
- ctrl->hpc_ops = &pciehp_hpc_ops;
- mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->ctrl_lock);
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
return NULL;
}
-void pcie_release_ctrl(struct controller *ctrl)
+void pciehp_release_ctrl(struct controller *ctrl)
{
pcie_shutdown_notification(ctrl);
pcie_cleanup_slot(ctrl);
int pciehp_configure_device(struct slot *p_slot)
{
struct pci_dev *dev;
- struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+ struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
int num, fn;
struct controller *ctrl = p_slot->ctrl;
- dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, 0));
+ dev = pci_get_slot(parent, PCI_DEVFN(0, 0));
if (dev) {
ctrl_err(ctrl, "Device %s already exists "
- "at %04x:%02x:%02x, cannot hot-add\n", pci_name(dev),
- pci_domain_nr(parent), p_slot->bus, p_slot->device);
+ "at %04x:%02x:00, cannot hot-add\n", pci_name(dev),
+ pci_domain_nr(parent), parent->number);
pci_dev_put(dev);
return -EINVAL;
}
- num = pci_scan_slot(parent, PCI_DEVFN(p_slot->device, 0));
+ num = pci_scan_slot(parent, PCI_DEVFN(0, 0));
if (num == 0) {
ctrl_err(ctrl, "No new device found\n");
return -ENODEV;
}
for (fn = 0; fn < 8; fn++) {
- dev = pci_get_slot(parent, PCI_DEVFN(p_slot->device, fn));
+ dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
if (!dev)
continue;
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
int j;
u8 bctl = 0;
u8 presence = 0;
- struct pci_bus *parent = p_slot->ctrl->pci_dev->subordinate;
+ struct pci_bus *parent = p_slot->ctrl->pcie->port->subordinate;
u16 command;
struct controller *ctrl = p_slot->ctrl;
- ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:%02x\n",
- __func__, pci_domain_nr(parent), p_slot->bus, p_slot->device);
- ret = p_slot->hpc_ops->get_adapter_status(p_slot, &presence);
+ ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",
+ __func__, pci_domain_nr(parent), parent->number);
+ ret = pciehp_get_adapter_status(p_slot, &presence);
if (ret)
presence = 0;
for (j = 0; j < 8; j++) {
- struct pci_dev* temp = pci_get_slot(parent,
- (p_slot->device << 3) | j);
+ struct pci_dev* temp = pci_get_slot(parent, PCI_DEVFN(0, j));
if (!temp)
continue;
if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
#define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY)
#define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA)
+#define IS_AZALIA(pdev) ((pdev)->vendor == 0x8086 && (pdev)->device == 0x3a3e)
#define IOAPIC_RANGE_START (0xfee00000)
#define IOAPIC_RANGE_END (0xfeefffff)
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
+static void __init check_tylersburg_isoch(void);
static int rwbf_quirk;
/*
}
static int iommu_identity_mapping;
+#define IDENTMAP_ALL 1
+#define IDENTMAP_GFX 2
+#define IDENTMAP_AZALIA 4
static int iommu_domain_identity_map(struct dmar_domain *domain,
unsigned long long start,
static int iommu_should_identity_map(struct pci_dev *pdev, int startup)
{
- if (iommu_identity_mapping == 2)
- return IS_GFX_DEVICE(pdev);
+ if ((iommu_identity_mapping & IDENTMAP_AZALIA) && IS_AZALIA(pdev))
+ return 1;
+
+ if ((iommu_identity_mapping & IDENTMAP_GFX) && IS_GFX_DEVICE(pdev))
+ return 1;
+
+ if (!(iommu_identity_mapping & IDENTMAP_ALL))
+ return 0;
/*
* We want to start off with all devices in the 1:1 domain, and
}
if (iommu_pass_through)
- iommu_identity_mapping = 1;
+ iommu_identity_mapping |= IDENTMAP_ALL;
+
#ifdef CONFIG_DMAR_BROKEN_GFX_WA
- else
- iommu_identity_mapping = 2;
+ iommu_identity_mapping |= IDENTMAP_GFX;
#endif
+
+ check_tylersburg_isoch();
+
/*
* If pass through is not set or not enabled, setup context entries for
* identity mappings for rmrr, gfx, and isa and may fall back to static
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x2a40, quirk_iommu_rwbf);
+
+/* On Tylersburg chipsets, some BIOSes have been known to enable the
+ ISOCH DMAR unit for the Azalia sound device, but not give it any
+ TLB entries, which causes it to deadlock. Check for that. We do
+ this in a function called from init_dmars(), instead of in a PCI
+ quirk, because we don't want to print the obnoxious "BIOS broken"
+ message if VT-d is actually disabled.
+*/
+static void __init check_tylersburg_isoch(void)
+{
+ struct pci_dev *pdev;
+ uint32_t vtisochctrl;
+
+ /* If there's no Azalia in the system anyway, forget it. */
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x3a3e, NULL);
+ if (!pdev)
+ return;
+ pci_dev_put(pdev);
+
+ /* System Management Registers. Might be hidden, in which case
+ we can't do the sanity check. But that's OK, because the
+ known-broken BIOSes _don't_ actually hide it, so far. */
+ pdev = pci_get_device(PCI_VENDOR_ID_INTEL, 0x342e, NULL);
+ if (!pdev)
+ return;
+
+ if (pci_read_config_dword(pdev, 0x188, &vtisochctrl)) {
+ pci_dev_put(pdev);
+ return;
+ }
+
+ pci_dev_put(pdev);
+
+ /* If Azalia DMA is routed to the non-isoch DMAR unit, fine. */
+ if (vtisochctrl & 1)
+ return;
+
+ /* Drop all bits other than the number of TLB entries */
+ vtisochctrl &= 0x1c;
+
+ /* If we have the recommended number of TLB entries (16), fine. */
+ if (vtisochctrl == 0x10)
+ return;
+
+ /* Zero TLB entries? You get to ride the short bus to school. */
+ if (!vtisochctrl) {
+ WARN(1, "Your BIOS is broken; DMA routed to ISOCH DMAR unit but no TLB space.\n"
+ "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+ dmi_get_system_info(DMI_BIOS_VENDOR),
+ dmi_get_system_info(DMI_BIOS_VERSION),
+ dmi_get_system_info(DMI_PRODUCT_VERSION));
+ iommu_identity_mapping |= IDENTMAP_AZALIA;
+ return;
+ }
+
+ printk(KERN_WARNING "DMAR: Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n",
+ vtisochctrl);
+}
else if (state == PCI_D2 || dev->current_state == PCI_D2)
udelay(PCI_PM_D2_DELAY);
- dev->current_state = state;
+ pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr);
+ dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK);
+ if (dev->current_state != state && printk_ratelimit())
+ dev_info(&dev->dev, "Refused to change power state, "
+ "currently in D%d\n", dev->current_state);
/* According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT
* INTERFACE SPECIFICATION, REV. 1.2", a device transitioning
/**
* pci_set_vga_state - set VGA decode state on device and parents if requested
- * @dev the PCI device
- * @decode - true = enable decoding, false = disable decoding
- * @command_bits PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
- * @change_bridge - traverse ancestors and change bridges
+ * @dev: the PCI device
+ * @decode: true = enable decoding, false = disable decoding
+ * @command_bits: PCI_COMMAND_IO and/or PCI_COMMAND_MEMORY
+ * @change_bridge: traverse ancestors and change bridges
*/
int pci_set_vga_state(struct pci_dev *dev, bool decode,
unsigned int command_bits, bool change_bridge)
return 1;
}
-static int __devinit pci_init(void)
-{
- struct pci_dev *dev = NULL;
-
- while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- pci_fixup_device(pci_fixup_final, dev);
- }
-
- return 0;
-}
-
static int __init pci_setup(char *str)
{
while (str) {
}
early_param("pci", pci_setup);
-device_initcall(pci_init);
-
EXPORT_SYMBOL(pci_reenable_device);
EXPORT_SYMBOL(pci_enable_device_io);
EXPORT_SYMBOL(pci_enable_device_mem);
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/pm.h>
static struct pcie_port_service_driver aerdriver = {
.name = "aer",
- .port_type = PCIE_ANY_PORT,
+ .port_type = PCIE_RC_PORT,
.service = PCIE_PORT_SERVICE_AER,
.probe = aer_probe,
{
if (pcie_aer_disable)
return -ENXIO;
+ if (!pci_msi_enabled())
+ return -ENXIO;
return pcie_port_service_register(&aerdriver);
}
pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32);
info->support = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
- /* 00b and 10b are defined as "Reserved". */
- if (info->support == PCIE_LINK_STATE_L1)
- info->support = 0;
info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
MODULE_LICENSE("GPL");
/* global data */
-static const char device_name[] = "pcieport-driver";
static int pcie_portdrv_restore_config(struct pci_dev *dev)
{
};
static struct pci_driver pcie_portdriver = {
- .name = (char *)device_name,
+ .name = "pcieport",
.id_table = &port_pci_ids[0],
.probe = pcie_portdrv_probe,
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi);
+/*
+ * TI XIO2000a PCIe-PCI Bridge erroneously reports it supports fast back-to-back:
+ * Disable fast back-to-back on the secondary bus segment
+ */
+static void __devinit quirk_xio2000a(struct pci_dev *dev)
+{
+ struct pci_dev *pdev;
+ u16 command;
+
+ dev_warn(&dev->dev, "TI XIO2000a quirk detected; "
+ "secondary bus fast back-to-back transfers disabled\n");
+ list_for_each_entry(pdev, &dev->subordinate->devices, bus_list) {
+ pci_read_config_word(pdev, PCI_COMMAND, &command);
+ if (command & PCI_COMMAND_FAST_BACK)
+ pci_write_config_word(pdev, PCI_COMMAND, command & ~PCI_COMMAND_FAST_BACK);
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XIO2000A,
+ quirk_xio2000a);
#ifdef CONFIG_X86_IO_APIC
static void __devinit quirk_amd_ide_mode(struct pci_dev *pdev)
{
- /* set SBX00 SATA in IDE mode to AHCI mode */
+ /* set SBX00/Hudson-2 SATA in IDE mode to AHCI mode */
u8 tmp;
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &tmp);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SATA, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
-DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE, quirk_amd_ide_mode);
/*
* Serverworks CSB5 IDE does not fully support native mode
}
pci_do_fixups(dev, start, end);
}
+
+static int __init pci_apply_final_quirks(void)
+{
+ struct pci_dev *dev = NULL;
+
+ while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
+ pci_fixup_device(pci_fixup_final, dev);
+ }
+
+ return 0;
+}
+
+fs_initcall_sync(pci_apply_final_quirks);
#else
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev) {}
#endif
return ret;
}
-#if 0
-int pci_assign_resource_fixed(struct pci_dev *dev, int resno)
-{
- struct pci_bus *bus = dev->bus;
- struct resource *res = dev->resource + resno;
- unsigned int type_mask;
- int i, ret = -EBUSY;
-
- type_mask = IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH;
-
- for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
- struct resource *r = bus->resource[i];
- if (!r)
- continue;
-
- /* type_mask must match */
- if ((res->flags ^ r->flags) & type_mask)
- continue;
-
- ret = request_resource(r, res);
-
- if (ret == 0)
- break;
- }
-
- if (ret) {
- dev_err(&dev->dev, "BAR %d: can't allocate %s resource %pR\n",
- resno, res->flags & IORESOURCE_IO ? "I/O" : "mem", res);
- } else if (resno < PCI_BRIDGE_RESOURCES) {
- pci_update_resource(dev, resno);
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(pci_assign_resource_fixed);
-#endif
-
/* Sort resources by alignment */
void pdev_sort_resources(struct pci_dev *dev, struct resource_list *head)
{
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
+config PCMCIA_BCM63XX
+ tristate "bcm63xx pcmcia support"
+ depends on BCM63XX && PCMCIA
+
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
+obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o
obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
obj-$(CONFIG_OMAP_CF) += omap_cf.o
pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o
pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o
pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o
+pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o
pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o
pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
struct at91_cf_socket *cf = platform_get_drvdata(pdev);
struct at91_cf_data *board = cf->board;
- pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+ pcmcia_socket_dev_suspend(&pdev->dev);
if (device_may_wakeup(&pdev->dev)) {
enable_irq_wake(board->det_pin);
if (board->irq_pin)
static int au1x00_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int au1x00_drv_pcmcia_resume(struct platform_device *dev)
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include "bcm63xx_pcmcia.h"
+
+#define PFX "bcm63xx_pcmcia: "
+
+#ifdef CONFIG_CARDBUS
+/* if cardbus is used, platform device needs reference to actual pci
+ * device */
+static struct pci_dev *bcm63xx_cb_dev;
+#endif
+
+/*
+ * read/write helper for pcmcia regs
+ */
+static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
+{
+ return bcm_readl(skt->base + off);
+}
+
+static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
+ u32 val, u32 off)
+{
+ bcm_writel(val, skt->base + off);
+}
+
+/*
+ * This callback should (re-)initialise the socket, turn on status
+ * interrupts and PCMCIA bus, and wait for power to stabilise so that
+ * the card status signals report correctly.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
+{
+ return 0;
+}
+
+/*
+ * This callback should remove power on the socket, disable IRQs from
+ * the card, turn off status interrupts, and disable the PCMCIA bus.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
+{
+ return 0;
+}
+
+/*
+ * Implements the set_socket() operation for the in-kernel PCMCIA
+ * service (formerly SS_SetSocket in Card Services). We more or
+ * less punt all of this work and let the kernel handle the details
+ * of power configuration, reset, &c. We also record the value of
+ * `state' in order to regurgitate it to the PCMCIA core later.
+ */
+static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
+ socket_state_t *state)
+{
+ struct bcm63xx_pcmcia_socket *skt;
+ unsigned long flags;
+ u32 val;
+
+ skt = sock->driver_data;
+
+ spin_lock_irqsave(&skt->lock, flags);
+
+ /* note: hardware cannot control socket power, so we will
+ * always report SS_POWERON */
+
+ /* apply socket reset */
+ val = pcmcia_readl(skt, PCMCIA_C1_REG);
+ if (state->flags & SS_RESET)
+ val |= PCMCIA_C1_RESET_MASK;
+ else
+ val &= ~PCMCIA_C1_RESET_MASK;
+
+ /* reverse reset logic for cardbus card */
+ if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
+ val ^= PCMCIA_C1_RESET_MASK;
+
+ pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+ /* keep requested state for event reporting */
+ skt->requested_state = *state;
+
+ spin_unlock_irqrestore(&skt->lock, flags);
+
+ return 0;
+}
+
+/*
+ * identity cardtype from VS[12] input, CD[12] input while only VS2 is
+ * floating, and CD[12] input while only VS1 is floating
+ */
+enum {
+ IN_VS1 = (1 << 0),
+ IN_VS2 = (1 << 1),
+ IN_CD1_VS2H = (1 << 2),
+ IN_CD2_VS2H = (1 << 3),
+ IN_CD1_VS1H = (1 << 4),
+ IN_CD2_VS1H = (1 << 5),
+};
+
+static const u8 vscd_to_cardtype[] = {
+
+ /* VS1 float, VS2 float */
+ [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
+
+ /* VS1 grounded, VS2 float */
+ [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
+
+ /* VS1 grounded, VS2 grounded */
+ [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
+
+ /* VS1 tied to CD1, VS2 float */
+ [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
+
+ /* VS1 grounded, VS2 tied to CD2 */
+ [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
+
+ /* VS1 tied to CD2, VS2 grounded */
+ [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
+
+ /* VS1 float, VS2 grounded */
+ [IN_VS1] = (CARD_PCCARD | CARD_XV),
+
+ /* VS1 float, VS2 tied to CD2 */
+ [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
+
+ /* VS1 float, VS2 tied to CD1 */
+ [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
+
+ /* VS1 tied to CD2, VS2 float */
+ [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
+
+ /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
+ [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
+};
+
+/*
+ * poll hardware to check card insertion status
+ */
+static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
+{
+ unsigned int stat;
+ u32 val;
+
+ stat = 0;
+
+ /* check CD for card presence */
+ val = pcmcia_readl(skt, PCMCIA_C1_REG);
+
+ if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
+ stat |= SS_DETECT;
+
+ /* if new insertion, detect cardtype */
+ if ((stat & SS_DETECT) && !skt->card_detected) {
+ unsigned int stat = 0;
+
+ /* float VS1, float VS2 */
+ val |= PCMCIA_C1_VS1OE_MASK;
+ val |= PCMCIA_C1_VS2OE_MASK;
+ pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+ /* wait for output to stabilize and read VS[12] */
+ udelay(10);
+ val = pcmcia_readl(skt, PCMCIA_C1_REG);
+ stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
+ stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
+
+ /* drive VS1 low, float VS2 */
+ val &= ~PCMCIA_C1_VS1OE_MASK;
+ val |= PCMCIA_C1_VS2OE_MASK;
+ pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+ /* wait for output to stabilize and read CD[12] */
+ udelay(10);
+ val = pcmcia_readl(skt, PCMCIA_C1_REG);
+ stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
+ stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
+
+ /* float VS1, drive VS2 low */
+ val |= PCMCIA_C1_VS1OE_MASK;
+ val &= ~PCMCIA_C1_VS2OE_MASK;
+ pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+ /* wait for output to stabilize and read CD[12] */
+ udelay(10);
+ val = pcmcia_readl(skt, PCMCIA_C1_REG);
+ stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
+ stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
+
+ /* guess cardtype from all this */
+ skt->card_type = vscd_to_cardtype[stat];
+ if (!skt->card_type)
+ dev_err(&skt->socket.dev, "unsupported card type\n");
+
+ /* drive both VS pin to 0 again */
+ val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
+
+ /* enable correct logic */
+ val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
+ if (skt->card_type & CARD_PCCARD)
+ val |= PCMCIA_C1_EN_PCMCIA_MASK;
+ else
+ val |= PCMCIA_C1_EN_CARDBUS_MASK;
+
+ pcmcia_writel(skt, val, PCMCIA_C1_REG);
+ }
+ skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
+
+ /* report card type/voltage */
+ if (skt->card_type & CARD_CARDBUS)
+ stat |= SS_CARDBUS;
+ if (skt->card_type & CARD_3V)
+ stat |= SS_3VCARD;
+ if (skt->card_type & CARD_XV)
+ stat |= SS_XVCARD;
+ stat |= SS_POWERON;
+
+ if (gpio_get_value(skt->pd->ready_gpio))
+ stat |= SS_READY;
+
+ return stat;
+}
+
+/*
+ * core request to get current socket status
+ */
+static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
+ unsigned int *status)
+{
+ struct bcm63xx_pcmcia_socket *skt;
+
+ skt = sock->driver_data;
+
+ spin_lock_bh(&skt->lock);
+ *status = __get_socket_status(skt);
+ spin_unlock_bh(&skt->lock);
+
+ return 0;
+}
+
+/*
+ * socket polling timer callback
+ */
+static void bcm63xx_pcmcia_poll(unsigned long data)
+{
+ struct bcm63xx_pcmcia_socket *skt;
+ unsigned int stat, events;
+
+ skt = (struct bcm63xx_pcmcia_socket *)data;
+
+ spin_lock_bh(&skt->lock);
+
+ stat = __get_socket_status(skt);
+
+ /* keep only changed bits, and mask with required one from the
+ * core */
+ events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
+ skt->old_status = stat;
+ spin_unlock_bh(&skt->lock);
+
+ if (events)
+ pcmcia_parse_events(&skt->socket, events);
+
+ mod_timer(&skt->timer,
+ jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+}
+
+static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
+ struct pccard_io_map *map)
+{
+ /* this doesn't seem to be called by pcmcia layer if static
+ * mapping is used */
+ return 0;
+}
+
+static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
+ struct pccard_mem_map *map)
+{
+ struct bcm63xx_pcmcia_socket *skt;
+ struct resource *res;
+
+ skt = sock->driver_data;
+ if (map->flags & MAP_ATTRIB)
+ res = skt->attr_res;
+ else
+ res = skt->common_res;
+
+ map->static_start = res->start + map->card_start;
+ return 0;
+}
+
+static struct pccard_operations bcm63xx_pcmcia_operations = {
+ .init = bcm63xx_pcmcia_sock_init,
+ .suspend = bcm63xx_pcmcia_suspend,
+ .get_status = bcm63xx_pcmcia_get_status,
+ .set_socket = bcm63xx_pcmcia_set_socket,
+ .set_io_map = bcm63xx_pcmcia_set_io_map,
+ .set_mem_map = bcm63xx_pcmcia_set_mem_map,
+};
+
+/*
+ * register pcmcia socket to core
+ */
+static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
+{
+ struct bcm63xx_pcmcia_socket *skt;
+ struct pcmcia_socket *sock;
+ struct resource *res, *irq_res;
+ unsigned int regmem_size = 0, iomem_size = 0;
+ u32 val;
+ int ret;
+
+ skt = kzalloc(sizeof(*skt), GFP_KERNEL);
+ if (!skt)
+ return -ENOMEM;
+ spin_lock_init(&skt->lock);
+ sock = &skt->socket;
+ sock->driver_data = skt;
+
+ /* make sure we have all resources we need */
+ skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ skt->pd = pdev->dev.platform_data;
+ if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* remap pcmcia registers */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regmem_size = resource_size(res);
+ if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
+ ret = -EINVAL;
+ goto err;
+ }
+ skt->reg_res = res;
+
+ skt->base = ioremap(res->start, regmem_size);
+ if (!skt->base) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /* remap io registers */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+ iomem_size = resource_size(res);
+ skt->io_base = ioremap(res->start, iomem_size);
+ if (!skt->io_base) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ /* resources are static */
+ sock->resource_ops = &pccard_static_ops;
+ sock->ops = &bcm63xx_pcmcia_operations;
+ sock->owner = THIS_MODULE;
+ sock->dev.parent = &pdev->dev;
+ sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+ sock->io_offset = (unsigned long)skt->io_base;
+ sock->pci_irq = irq_res->start;
+
+#ifdef CONFIG_CARDBUS
+ sock->cb_dev = bcm63xx_cb_dev;
+ if (bcm63xx_cb_dev)
+ sock->features |= SS_CAP_CARDBUS;
+#endif
+
+ /* assume common & attribute memory have the same size */
+ sock->map_size = resource_size(skt->common_res);
+
+ /* initialize polling timer */
+ setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
+
+ /* initialize pcmcia control register, drive VS[12] to 0,
+ * leave CB IDSEL to the old value since it is set by the PCI
+ * layer */
+ val = pcmcia_readl(skt, PCMCIA_C1_REG);
+ val &= PCMCIA_C1_CBIDSEL_MASK;
+ val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
+ pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+ /*
+ * Hardware has only one set of timings registers, not one for
+ * each memory access type, so we configure them for the
+ * slowest one: attribute memory.
+ */
+ val = PCMCIA_C2_DATA16_MASK;
+ val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
+ val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
+ val |= 3 << PCMCIA_C2_SETUP_SHIFT;
+ val |= 3 << PCMCIA_C2_HOLD_SHIFT;
+ pcmcia_writel(skt, val, PCMCIA_C2_REG);
+
+ ret = pcmcia_register_socket(sock);
+ if (ret)
+ goto err;
+
+ /* start polling socket */
+ mod_timer(&skt->timer,
+ jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+
+ platform_set_drvdata(pdev, skt);
+ return 0;
+
+err:
+ if (skt->io_base)
+ iounmap(skt->io_base);
+ if (skt->base)
+ iounmap(skt->base);
+ if (skt->reg_res)
+ release_mem_region(skt->reg_res->start, regmem_size);
+ kfree(skt);
+ return ret;
+}
+
+static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
+{
+ struct bcm63xx_pcmcia_socket *skt;
+ struct resource *res;
+
+ skt = platform_get_drvdata(pdev);
+ del_timer_sync(&skt->timer);
+ iounmap(skt->base);
+ iounmap(skt->io_base);
+ res = skt->reg_res;
+ release_mem_region(res->start, resource_size(res));
+ kfree(skt);
+ return 0;
+}
+
+struct platform_driver bcm63xx_pcmcia_driver = {
+ .probe = bcm63xx_drv_pcmcia_probe,
+ .remove = __devexit_p(bcm63xx_drv_pcmcia_remove),
+ .driver = {
+ .name = "bcm63xx_pcmcia",
+ .owner = THIS_MODULE,
+ },
+};
+
+#ifdef CONFIG_CARDBUS
+static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ /* keep pci device */
+ bcm63xx_cb_dev = dev;
+ return platform_driver_register(&bcm63xx_pcmcia_driver);
+}
+
+static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
+{
+ platform_driver_unregister(&bcm63xx_pcmcia_driver);
+ bcm63xx_cb_dev = NULL;
+}
+
+static struct pci_device_id bcm63xx_cb_table[] = {
+ {
+ .vendor = PCI_VENDOR_ID_BROADCOM,
+ .device = BCM6348_CPU_ID,
+ .subvendor = PCI_VENDOR_ID_BROADCOM,
+ .subdevice = PCI_ANY_ID,
+ .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
+ .class_mask = ~0,
+ },
+
+ {
+ .vendor = PCI_VENDOR_ID_BROADCOM,
+ .device = BCM6358_CPU_ID,
+ .subvendor = PCI_VENDOR_ID_BROADCOM,
+ .subdevice = PCI_ANY_ID,
+ .class = PCI_CLASS_BRIDGE_CARDBUS << 8,
+ .class_mask = ~0,
+ },
+
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
+
+static struct pci_driver bcm63xx_cardbus_driver = {
+ .name = "bcm63xx_cardbus",
+ .id_table = bcm63xx_cb_table,
+ .probe = bcm63xx_cb_probe,
+ .remove = __devexit_p(bcm63xx_cb_exit),
+};
+#endif
+
+/*
+ * if cardbus support is enabled, register our platform device after
+ * our fake cardbus bridge has been registered
+ */
+static int __init bcm63xx_pcmcia_init(void)
+{
+#ifdef CONFIG_CARDBUS
+ return pci_register_driver(&bcm63xx_cardbus_driver);
+#else
+ return platform_driver_register(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+static void __exit bcm63xx_pcmcia_exit(void)
+{
+#ifdef CONFIG_CARDBUS
+ return pci_unregister_driver(&bcm63xx_cardbus_driver);
+#else
+ platform_driver_unregister(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+module_init(bcm63xx_pcmcia_init);
+module_exit(bcm63xx_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");
--- /dev/null
+#ifndef BCM63XX_PCMCIA_H_
+#define BCM63XX_PCMCIA_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <pcmcia/ss.h>
+#include <bcm63xx_dev_pcmcia.h>
+
+/* socket polling rate in ms */
+#define BCM63XX_PCMCIA_POLL_RATE 500
+
+enum {
+ CARD_CARDBUS = (1 << 0),
+ CARD_PCCARD = (1 << 1),
+ CARD_5V = (1 << 2),
+ CARD_3V = (1 << 3),
+ CARD_XV = (1 << 4),
+ CARD_YV = (1 << 5),
+};
+
+struct bcm63xx_pcmcia_socket {
+ struct pcmcia_socket socket;
+
+ /* platform specific data */
+ struct bcm63xx_pcmcia_platform_data *pd;
+
+ /* all regs access are protected by this spinlock */
+ spinlock_t lock;
+
+ /* pcmcia registers resource */
+ struct resource *reg_res;
+
+ /* base remapped address of registers */
+ void __iomem *base;
+
+ /* whether a card is detected at the moment */
+ int card_detected;
+
+ /* type of detected card (mask of above enum) */
+ u8 card_type;
+
+ /* keep last socket status to implement event reporting */
+ unsigned int old_status;
+
+ /* backup of requested socket state */
+ socket_state_t requested_state;
+
+ /* timer used for socket status polling */
+ struct timer_list timer;
+
+ /* attribute/common memory resources */
+ struct resource *attr_res;
+ struct resource *common_res;
+ struct resource *io_res;
+
+ /* base address of io memory */
+ void __iomem *io_base;
+};
+
+#endif /* BCM63XX_PCMCIA_H_ */
static int bfin_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+ return pcmcia_socket_dev_suspend(&pdev->dev);
}
static int bfin_cf_resume(struct platform_device *pdev)
return -ENOMEM;
}
tuple.DesiredTuple = code;
- tuple.Attributes = TUPLE_RETURN_COMMON;
+ tuple.Attributes = 0;
+ if (function == BIND_FN_ALL)
+ tuple.Attributes = TUPLE_RETURN_COMMON;
ret = pccard_get_first_tuple(s, function, &tuple);
if (ret != 0)
goto done;
======================================================================*/
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function, unsigned int *info)
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *info)
{
tuple_t *tuple;
cisparse_t *p;
count = reserved = 0;
tuple->DesiredTuple = RETURN_FIRST_TUPLE;
tuple->Attributes = TUPLE_RETURN_COMMON;
- ret = pccard_get_first_tuple(s, function, tuple);
+ ret = pccard_get_first_tuple(s, BIND_FN_ALL, tuple);
if (ret != 0)
goto done;
/* First tuple should be DEVICE; we should really have either that
or a CFTABLE_ENTRY of some sort */
if ((tuple->TupleCode == CISTPL_DEVICE) ||
- (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_CFTABLE_ENTRY_CB, p) == 0))
dev_ok++;
/* All cards should have a MANFID tuple, and/or a VERS_1 or VERS_2
tuple, for card identification. Certain old D-Link and Linksys
cards have only a broken VERS_2 tuple; hence the bogus test. */
- if ((pccard_read_tuple(s, function, CISTPL_MANFID, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_VERS_1, p) == 0) ||
- (pccard_read_tuple(s, function, CISTPL_VERS_2, p) != -ENOSPC))
+ if ((pccard_read_tuple(s, BIND_FN_ALL, CISTPL_MANFID, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_1, p) == 0) ||
+ (pccard_read_tuple(s, BIND_FN_ALL, CISTPL_VERS_2, p) != -ENOSPC))
ident_ok++;
if (!dev_ok && !ident_ok)
goto done;
for (count = 1; count < MAX_TUPLES; count++) {
- ret = pccard_get_next_tuple(s, function, tuple);
+ ret = pccard_get_next_tuple(s, BIND_FN_ALL, tuple);
if (ret != 0)
break;
if (((tuple->TupleCode > 0x23) && (tuple->TupleCode < 0x40)) ||
* These functions check for the appropriate struct pcmcia_soket arrays,
* and pass them to the low-level functions pcmcia_{suspend,resume}_socket
*/
+static int socket_early_resume(struct pcmcia_socket *skt);
+static int socket_late_resume(struct pcmcia_socket *skt);
static int socket_resume(struct pcmcia_socket *skt);
static int socket_suspend(struct pcmcia_socket *skt);
-int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state)
+static void pcmcia_socket_dev_run(struct device *dev,
+ int (*cb)(struct pcmcia_socket *))
{
struct pcmcia_socket *socket;
if (socket->dev.parent != dev)
continue;
mutex_lock(&socket->skt_mutex);
- socket_suspend(socket);
+ cb(socket);
mutex_unlock(&socket->skt_mutex);
}
up_read(&pcmcia_socket_list_rwsem);
+}
+int pcmcia_socket_dev_suspend(struct device *dev)
+{
+ pcmcia_socket_dev_run(dev, socket_suspend);
return 0;
}
EXPORT_SYMBOL(pcmcia_socket_dev_suspend);
-int pcmcia_socket_dev_resume(struct device *dev)
+void pcmcia_socket_dev_early_resume(struct device *dev)
{
- struct pcmcia_socket *socket;
+ pcmcia_socket_dev_run(dev, socket_early_resume);
+}
+EXPORT_SYMBOL(pcmcia_socket_dev_early_resume);
- down_read(&pcmcia_socket_list_rwsem);
- list_for_each_entry(socket, &pcmcia_socket_list, socket_list) {
- if (socket->dev.parent != dev)
- continue;
- mutex_lock(&socket->skt_mutex);
- socket_resume(socket);
- mutex_unlock(&socket->skt_mutex);
- }
- up_read(&pcmcia_socket_list_rwsem);
+void pcmcia_socket_dev_late_resume(struct device *dev)
+{
+ pcmcia_socket_dev_run(dev, socket_late_resume);
+}
+EXPORT_SYMBOL(pcmcia_socket_dev_late_resume);
+int pcmcia_socket_dev_resume(struct device *dev)
+{
+ pcmcia_socket_dev_run(dev, socket_resume);
return 0;
}
EXPORT_SYMBOL(pcmcia_socket_dev_resume);
return 0;
}
-/*
- * Resume a socket. If a card is present, verify its CIS against
- * our cached copy. If they are different, the card has been
- * replaced, and we need to tell the drivers.
- */
-static int socket_resume(struct pcmcia_socket *skt)
+static int socket_early_resume(struct pcmcia_socket *skt)
{
- int ret;
-
- if (!(skt->state & SOCKET_SUSPEND))
- return -EBUSY;
-
skt->socket = dead_socket;
skt->ops->init(skt);
skt->ops->set_socket(skt, &skt->socket);
+ if (skt->state & SOCKET_PRESENT)
+ skt->resume_status = socket_setup(skt, resume_delay);
+ return 0;
+}
+static int socket_late_resume(struct pcmcia_socket *skt)
+{
if (!(skt->state & SOCKET_PRESENT)) {
skt->state &= ~SOCKET_SUSPEND;
return socket_insert(skt);
}
- ret = socket_setup(skt, resume_delay);
- if (ret == 0) {
+ if (skt->resume_status == 0) {
/*
* FIXME: need a better check here for cardbus cards.
*/
return 0;
}
+/*
+ * Resume a socket. If a card is present, verify its CIS against
+ * our cached copy. If they are different, the card has been
+ * replaced, and we need to tell the drivers.
+ */
+static int socket_resume(struct pcmcia_socket *skt)
+{
+ if (!(skt->state & SOCKET_SUSPEND))
+ return -EBUSY;
+
+ socket_early_resume(skt);
+ return socket_late_resume(skt);
+}
+
static void socket_remove(struct pcmcia_socket *skt)
{
dev_printk(KERN_NOTICE, &skt->dev,
cisdata_t code, void *parse);
int pcmcia_replace_cis(struct pcmcia_socket *s,
const u8 *data, const size_t len);
-int pccard_validate_cis(struct pcmcia_socket *s, unsigned int function,
- unsigned int *count);
+int pccard_validate_cis(struct pcmcia_socket *s, unsigned int *count);
/* rsrc_mgr.c */
int pcmcia_validate_mem(struct pcmcia_socket *s);
if (!vers1)
return -ENOMEM;
- if (!pccard_read_tuple(p_dev->socket, p_dev->func,
+ if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL,
CISTPL_MANFID, &manf_id)) {
p_dev->manf_id = manf_id.manf;
p_dev->card_id = manf_id.card;
kfree(devgeo);
}
- if (!pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_VERS_1,
+ if (!pccard_read_tuple(p_dev->socket, BIND_FN_ALL, CISTPL_VERS_1,
vers1)) {
- for (i=0; i < vers1->ns; i++) {
+ for (i = 0; i < min_t(unsigned int, 4, vers1->ns); i++) {
char *tmp;
unsigned int length;
return -EAGAIN; /* try again, but later... */
}
- ret = pccard_validate_cis(s, BIND_FN_ALL, &no_chains);
+ ret = pccard_validate_cis(s, &no_chains);
if (ret || !no_chains) {
ds_dev_dbg(0, &s->dev, "invalid CIS or invalid resources\n");
return -ENODEV;
#ifdef CONFIG_PM
static int i82092aa_socket_suspend (struct pci_dev *dev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int i82092aa_socket_resume (struct pci_dev *dev)
u_char map, ioctl;
debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags, io->speed,
+ (unsigned long long)io->start, (unsigned long long)io->stop);
map = io->map;
if ((map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
(io->stop < io->start)) return -EINVAL;
static int i82365_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int i82365_drv_pcmcia_resume(struct platform_device *dev)
u_char map;
debug(3, "m32r_cfc: SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#lx-%#lx)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
map = io->map;
return 0;
pcc_socket_t *t = &socket[sock];
debug(3, "m32r_cfc: SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#lx, %#x)\n", sock, map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#llx, %#x)\n", sock, map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/*
* sanity check
static int cfc_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int cfc_drv_pcmcia_resume(struct platform_device *dev)
u_char map;
debug(3, "m32r-pcc: SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", sock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", sock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
map = io->map;
return 0;
#endif
debug(3, "m32r-pcc: SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#lx, %#x)\n", sock, map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#llx, %#x)\n", sock, map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/*
* sanity check
static int pcc_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int pcc_drv_pcmcia_resume(struct platform_device *dev)
#define M8XX_BASE (PCMCIA_IO_WIN_BASE + io->start)
dprintk("SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#4.4x-%#4.4x)\n", lsock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#4.4llx-%#4.4llx)\n", lsock, io->map, io->flags,
+ io->speed, (unsigned long long)io->start,
+ (unsigned long long)io->stop);
if ((io->map >= PCMCIA_IO_WIN_NO) || (io->start > 0xffff)
|| (io->stop > 0xffff) || (io->stop < io->start))
pcmconf8xx_t *pcmcia = s->pcmcia;
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
if ((mem->map >= PCMCIA_MEM_WIN_NO)
// || ((mem->s) >= PCMCIA_MEM_WIN_SIZE)
}
dprintk("SetMemMap(%d, %d, %#2.2x, %d ns, "
- "%#5.5lx, %#5.5x)\n", lsock, mem->map, mem->flags,
- mem->speed, mem->static_start, mem->card_start);
+ "%#5.5llx, %#5.5x)\n", lsock, mem->map, mem->flags,
+ mem->speed, (unsigned long long)mem->static_start,
+ mem->card_start);
/* copy the struct and modify the copy */
#ifdef CONFIG_PM
static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&pdev->dev, state);
+ return pcmcia_socket_dev_suspend(&pdev->dev);
}
static int m8xx_resume(struct platform_device *pdev)
static int omap_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
{
- return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+ return pcmcia_socket_dev_suspend(&pdev->dev);
}
static int omap_cf_resume(struct platform_device *pdev)
mutex_lock(&s->skt_mutex);
pcmcia_validate_mem(s);
mutex_unlock(&s->skt_mutex);
- ret = pccard_validate_cis(s, BIND_FN_ALL, &buf->cisinfo.Chains);
+ ret = pccard_validate_cis(s, &buf->cisinfo.Chains);
break;
case DS_SUSPEND_CARD:
ret = pcmcia_suspend_card(s);
if ((ret = pci_enable_device(dev)))
goto err_out_free_mem;
+ if (!pci_resource_start(dev, 0)) {
+ printk(KERN_INFO "pd6729: refusing to load the driver "
+ "as the io_base is 0.\n");
+ goto err_out_free_mem;
+ }
+
printk(KERN_INFO "pd6729: Cirrus PD6729 PCI to PCMCIA Bridge "
"at 0x%llx on irq %d\n",
(unsigned long long)pci_resource_start(dev, 0), dev->irq);
#ifdef CONFIG_PM
static int pd6729_socket_suspend(struct pci_dev *dev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int pd6729_socket_resume(struct pci_dev *dev)
return soc_common_drv_pcmcia_remove(&dev->dev);
}
-static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa2xx_drv_pcmcia_suspend(struct device *dev)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(dev);
}
-static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
+static int pxa2xx_drv_pcmcia_resume(struct device *dev)
{
- pxa2xx_configure_sockets(&dev->dev);
- return pcmcia_socket_dev_resume(&dev->dev);
+ pxa2xx_configure_sockets(dev);
+ return pcmcia_socket_dev_resume(dev);
}
+static struct dev_pm_ops pxa2xx_drv_pcmcia_pm_ops = {
+ .suspend = pxa2xx_drv_pcmcia_suspend,
+ .resume = pxa2xx_drv_pcmcia_resume,
+};
+
static struct platform_driver pxa2xx_pcmcia_driver = {
.probe = pxa2xx_drv_pcmcia_probe,
.remove = pxa2xx_drv_pcmcia_remove,
- .suspend = pxa2xx_drv_pcmcia_suspend,
- .resume = pxa2xx_drv_pcmcia_resume,
.driver = {
.name = "pxa2xx-pcmcia",
.owner = THIS_MODULE,
+ .pm = &pxa2xx_drv_pcmcia_pm_ops,
},
};
--- /dev/null
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmtc.c
+ *
+ * Driver for Palm Tungsten|C PCMCIA
+ *
+ * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <mach/palmtc.h>
+#include "soc_common.h"
+
+static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+ int ret;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+ if (ret)
+ goto err3;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3");
+ if (ret)
+ goto err3;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+ if (ret)
+ goto err4;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST");
+ if (ret)
+ goto err4;
+ ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+ if (ret)
+ goto err5;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY");
+ if (ret)
+ goto err5;
+ ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY);
+ if (ret)
+ goto err6;
+
+ ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY");
+ if (ret)
+ goto err6;
+ ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+ if (ret)
+ goto err7;
+
+ skt->irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
+ return 0;
+
+err7:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+err6:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
+err5:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
+err4:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
+err3:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
+err2:
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+err1:
+ return ret;
+}
+
+static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
+ gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+}
+
+static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+ struct pcmcia_state *state)
+{
+ state->detect = 1; /* always inserted */
+ state->ready = !!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_READY);
+ state->bvd1 = 1;
+ state->bvd2 = 1;
+ state->wrprot = 0;
+ state->vs_3v = 1;
+ state->vs_Xv = 0;
+}
+
+static int palmtc_wifi_powerdown(void)
+{
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+ mdelay(40);
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+ return 0;
+}
+
+static int palmtc_wifi_powerup(void)
+{
+ int timeout = 50;
+
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
+ mdelay(50);
+
+ /* Power up the card, 1.8V first, after a while 3.3V */
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
+ mdelay(100);
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
+
+ /* Wait till the card is ready */
+ while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
+ timeout) {
+ mdelay(1);
+ timeout--;
+ }
+
+ /* Power down the WiFi in case of error */
+ if (!timeout) {
+ palmtc_wifi_powerdown();
+ return 1;
+ }
+
+ /* Reset the card */
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+ mdelay(20);
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
+ mdelay(25);
+
+ gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+
+ return 0;
+}
+
+static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+ const socket_state_t *state)
+{
+ int ret = 1;
+
+ if (state->Vcc == 0)
+ ret = palmtc_wifi_powerdown();
+ else if (state->Vcc == 33)
+ ret = palmtc_wifi_powerup();
+
+ return ret;
+}
+
+static void palmtc_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmtc_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level palmtc_pcmcia_ops = {
+ .owner = THIS_MODULE,
+
+ .first = 0,
+ .nr = 1,
+
+ .hw_init = palmtc_pcmcia_hw_init,
+ .hw_shutdown = palmtc_pcmcia_hw_shutdown,
+
+ .socket_state = palmtc_pcmcia_socket_state,
+ .configure_socket = palmtc_pcmcia_configure_socket,
+
+ .socket_init = palmtc_pcmcia_socket_init,
+ .socket_suspend = palmtc_pcmcia_socket_suspend,
+};
+
+static struct platform_device *palmtc_pcmcia_device;
+
+static int __init palmtc_pcmcia_init(void)
+{
+ int ret;
+
+ if (!machine_is_palmtc())
+ return -ENODEV;
+
+ palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+ if (!palmtc_pcmcia_device)
+ return -ENOMEM;
+
+ ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
+ sizeof(palmtc_pcmcia_ops));
+
+ if (!ret)
+ ret = platform_device_add(palmtc_pcmcia_device);
+
+ if (ret)
+ platform_device_put(palmtc_pcmcia_device);
+
+ return ret;
+}
+
+static void __exit palmtc_pcmcia_exit(void)
+{
+ platform_device_unregister(palmtc_pcmcia_device);
+}
+
+module_init(palmtc_pcmcia_init);
+module_exit(palmtc_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+ " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
/* First, what does a floating port look like? */
b = kzalloc(256, GFP_KERNEL);
if (!b) {
+ printk("\n");
dev_printk(KERN_ERR, &s->dev,
"do_io_probe: unable to kmalloc 256 bytes");
return;
s->cis_mem.res = res;
s->cis_virt = ioremap(res->start, s->map_size);
if (s->cis_virt) {
- ret = pccard_validate_cis(s, BIND_FN_ALL, count);
+ ret = pccard_validate_cis(s, count);
/* invalidate mapping and CIS cache */
iounmap(s->cis_virt);
s->cis_virt = NULL;
.socket_suspend = assabet_pcmcia_socket_suspend,
};
-int __init pcmcia_assabet_init(struct device *dev)
+int pcmcia_assabet_init(struct device *dev)
{
int ret = -ENODEV;
static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int sa11x0_drv_pcmcia_resume(struct platform_device *dev)
.socket_suspend = sa1111_pcmcia_socket_suspend,
};
-int __init pcmcia_neponset_init(struct sa1111_dev *sadev)
+int pcmcia_neponset_init(struct sa1111_dev *sadev)
{
int ret = -ENODEV;
static int pcmcia_suspend(struct sa1111_dev *dev, pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int pcmcia_resume(struct sa1111_dev *dev)
struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
unsigned short speed = map->speed;
- debug(skt, 2, "map %u speed %u start 0x%08x stop 0x%08x\n",
- map->map, map->speed, map->start, map->stop);
+ debug(skt, 2, "map %u speed %u start 0x%08llx stop 0x%08llx\n",
+ map->map, map->speed, (unsigned long long)map->start,
+ (unsigned long long)map->stop);
debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
(map->flags==0)?"<NONE>":"",
(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
- if (pccard_validate_cis(s, BIND_FN_ALL, &chains))
+ if (pccard_validate_cis(s, &chains))
return -EIO;
if (!chains)
return -ENODATA;
static int tcic_drv_pcmcia_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int tcic_drv_pcmcia_resume(struct platform_device *dev)
u_short base, len, ioctl;
debug(1, "SetIOMap(%d, %d, %#2.2x, %d ns, "
- "%#x-%#x)\n", psock, io->map, io->flags,
- io->speed, io->start, io->stop);
+ "%#llx-%#llx)\n", psock, io->map, io->flags, io->speed,
+ (unsigned long long)io->start, (unsigned long long)io->stop);
if ((io->map > 1) || (io->start > 0xffff) || (io->stop > 0xffff) ||
(io->stop < io->start)) return -EINVAL;
tcic_setw(TCIC_ADDR+2, TCIC_ADR2_INDREG | (psock << TCIC_SS_SHFT));
static int vrc4171_card_suspend(struct platform_device *dev,
pm_message_t state)
{
- return pcmcia_socket_dev_suspend(&dev->dev, state);
+ return pcmcia_socket_dev_suspend(&dev->dev);
}
static int vrc4171_card_resume(struct platform_device *dev)
}
#ifdef CONFIG_PM
-static int yenta_dev_suspend (struct pci_dev *dev, pm_message_t state)
+static int yenta_dev_suspend_noirq(struct device *dev)
{
- struct yenta_socket *socket = pci_get_drvdata(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct yenta_socket *socket = pci_get_drvdata(pdev);
int ret;
- ret = pcmcia_socket_dev_suspend(&dev->dev, state);
+ ret = pcmcia_socket_dev_suspend(dev);
- if (socket) {
- if (socket->type && socket->type->save_state)
- socket->type->save_state(socket);
+ if (!socket)
+ return ret;
- /* FIXME: pci_save_state needs to have a better interface */
- pci_save_state(dev);
- pci_read_config_dword(dev, 16*4, &socket->saved_state[0]);
- pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
- pci_disable_device(dev);
+ if (socket->type && socket->type->save_state)
+ socket->type->save_state(socket);
- /*
- * Some laptops (IBM T22) do not like us putting the Cardbus
- * bridge into D3. At a guess, some other laptop will
- * probably require this, so leave it commented out for now.
- */
- /* pci_set_power_state(dev, 3); */
- }
+ pci_save_state(pdev);
+ pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]);
+ pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]);
+ pci_disable_device(pdev);
+
+ /*
+ * Some laptops (IBM T22) do not like us putting the Cardbus
+ * bridge into D3. At a guess, some other laptop will
+ * probably require this, so leave it commented out for now.
+ */
+ /* pci_set_power_state(dev, 3); */
return ret;
}
-
-static int yenta_dev_resume (struct pci_dev *dev)
+static int yenta_dev_resume_noirq(struct device *dev)
{
- struct yenta_socket *socket = pci_get_drvdata(dev);
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct yenta_socket *socket = pci_get_drvdata(pdev);
+ int ret;
- if (socket) {
- int rc;
+ if (!socket)
+ return 0;
- pci_set_power_state(dev, 0);
- /* FIXME: pci_restore_state needs to have a better interface */
- pci_restore_state(dev);
- pci_write_config_dword(dev, 16*4, socket->saved_state[0]);
- pci_write_config_dword(dev, 17*4, socket->saved_state[1]);
+ pci_write_config_dword(pdev, 16*4, socket->saved_state[0]);
+ pci_write_config_dword(pdev, 17*4, socket->saved_state[1]);
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
- pci_set_master(dev);
+ pci_set_master(pdev);
- if (socket->type && socket->type->restore_state)
- socket->type->restore_state(socket);
- }
+ if (socket->type && socket->type->restore_state)
+ socket->type->restore_state(socket);
+
+ pcmcia_socket_dev_early_resume(dev);
+ return 0;
+}
- return pcmcia_socket_dev_resume(&dev->dev);
+static int yenta_dev_resume(struct device *dev)
+{
+ pcmcia_socket_dev_late_resume(dev);
+ return 0;
}
+
+static struct dev_pm_ops yenta_pm_ops = {
+ .suspend_noirq = yenta_dev_suspend_noirq,
+ .resume_noirq = yenta_dev_resume_noirq,
+ .resume = yenta_dev_resume,
+ .freeze_noirq = yenta_dev_suspend_noirq,
+ .thaw_noirq = yenta_dev_resume_noirq,
+ .thaw = yenta_dev_resume,
+ .poweroff_noirq = yenta_dev_suspend_noirq,
+ .restore_noirq = yenta_dev_resume_noirq,
+ .restore = yenta_dev_resume,
+};
+
+#define YENTA_PM_OPS (¥ta_pm_ops)
+#else
+#define YENTA_PM_OPS NULL
#endif
#define CB_ID(vend,dev,type) \
.id_table = yenta_table,
.probe = yenta_probe,
.remove = __devexit_p(yenta_close),
-#ifdef CONFIG_PM
- .suspend = yenta_dev_suspend,
- .resume = yenta_dev_resume,
-#endif
+ .driver.pm = YENTA_PM_OPS,
};
return AE_BAD_PARAMETER;
if (quirks->mailled == 1) {
param = value ? 0x92 : 0x93;
+ i8042_lock_chip();
i8042_command(¶m, 0x1059);
+ i8042_unlock_chip();
return 0;
}
break;
/* The actual device the driver binds to */
static struct eeepc_hotk *ehotk;
+static void eeepc_rfkill_hotplug(bool real);
+
/* Platform device/driver */
static int eeepc_hotk_thaw(struct device *device);
static int eeepc_hotk_restore(struct device *device);
static int eeepc_rfkill_set(void *data, bool blocked)
{
unsigned long asl = (unsigned long)data;
- return set_acpi(asl, !blocked);
+ int ret;
+
+ if (asl != CM_ASL_WLAN)
+ return set_acpi(asl, !blocked);
+
+ /* hack to avoid panic with rt2860sta */
+ if (blocked)
+ eeepc_rfkill_hotplug(false);
+ ret = set_acpi(asl, !blocked);
+ return ret;
}
static const struct rfkill_ops eeepc_rfkill_ops = {
.set_block = eeepc_rfkill_set,
};
-static void __init eeepc_enable_camera(void)
+static void __devinit eeepc_enable_camera(void)
{
/*
* If the following call to set_acpi() fails, it's because there's no
struct backlight_device *bd = eeepc_backlight_device;
if (bd) {
int old = bd->props.brightness;
- bd->props.brightness = read_brightness(bd);
+ backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY);
return old;
}
return -1;
return 0;
}
-static void eeepc_rfkill_hotplug(void)
+static void eeepc_rfkill_hotplug(bool real)
{
struct pci_dev *dev;
struct pci_bus *bus;
- bool blocked = eeepc_wlan_rfkill_blocked();
+ bool blocked = real ? eeepc_wlan_rfkill_blocked() : true;
- if (ehotk->wlan_rfkill)
+ if (real && ehotk->wlan_rfkill)
rfkill_set_sw_state(ehotk->wlan_rfkill, blocked);
mutex_lock(&ehotk->hotplug_lock);
if (event != ACPI_NOTIFY_BUS_CHECK)
return;
- eeepc_rfkill_hotplug();
+ eeepc_rfkill_hotplug(true);
}
static void eeepc_hotk_notify(struct acpi_device *device, u32 event)
{
/* Refresh both wlan rfkill state and pci hotplug */
if (ehotk->wlan_rfkill)
- eeepc_rfkill_hotplug();
+ eeepc_rfkill_hotplug(true);
if (ehotk->bluetooth_rfkill)
rfkill_set_sw_state(ehotk->bluetooth_rfkill,
* Refresh pci hotplug in case the rfkill state was changed after
* eeepc_unregister_rfkill_notifier()
*/
- eeepc_rfkill_hotplug();
+ eeepc_rfkill_hotplug(true);
if (ehotk->hotplug_slot)
pci_hp_deregister(ehotk->hotplug_slot);
* Refresh pci hotplug in case the rfkill state was changed during
* setup.
*/
- eeepc_rfkill_hotplug();
+ eeepc_rfkill_hotplug(true);
exit:
if (result && result != -ENODEV)
return 0;
}
-static int eeepc_hotk_add(struct acpi_device *device)
+static int __devinit eeepc_hotk_add(struct acpi_device *device)
{
struct device *dev;
int result;
struct fujitsu_hotkey_t *fujitsu_hotkey = acpi_driver_data(device);
struct input_dev *input = fujitsu_hotkey->input;
-#ifdef CONFIG_LEDS_CLASS
+#if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
if (fujitsu_hotkey->logolamp_registered)
led_classdev_unregister(&logolamp_led);
sony_backlight_update_status(sony_backlight_device) < 0)
printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
+ /* re-read rfkill state */
+ sony_nc_rfkill_update();
+
return 0;
}
struct rfkill *rfk;
enum rfkill_type type;
const char *name;
+ int result;
+ bool hwblock;
switch (nc_type) {
case SONY_WIFI:
if (!rfk)
return -ENOMEM;
+ sony_call_snc_handle(0x124, 0x200, &result);
+ hwblock = !(result & 0x1);
+ rfkill_set_hw_state(rfk, hwblock);
+
err = rfkill_register(rfk);
if (err) {
rfkill_destroy(rfk);
}
}
- /* try to _INI the device if such method exists (ACPI spec 3.0-6.5.1
- * should be respected as we already checked for the device presence above */
- if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, METHOD_NAME__INI, &handle))) {
- dprintk("Invoking _INI\n");
- if (ACPI_FAILURE(acpi_evaluate_object(sony_nc_acpi_handle, METHOD_NAME__INI,
- NULL, NULL)))
- dprintk("_INI Method failed\n");
- }
-
if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "ECON",
&handle))) {
if (acpi_callsetfunc(sony_nc_acpi_handle, "ECON", 1, NULL))
struct sonypi_event *events;
};
-struct device_ctrl {
+struct sony_pic_dev {
+ struct acpi_device *acpi_dev;
+ struct sony_pic_irq *cur_irq;
+ struct sony_pic_ioport *cur_ioport;
+ struct list_head interrupts;
+ struct list_head ioports;
+ struct mutex lock;
+ struct sonypi_eventtypes *event_types;
+ int (*handle_irq)(const u8, const u8);
int model;
- int (*handle_irq)(const u8, const u8);
u16 evport_offset;
- u8 has_camera;
- u8 has_bluetooth;
- u8 has_wwan;
- struct sonypi_eventtypes *event_types;
-};
-
-struct sony_pic_dev {
- struct device_ctrl *control;
- struct acpi_device *acpi_dev;
- struct sony_pic_irq *cur_irq;
- struct sony_pic_ioport *cur_ioport;
- struct list_head interrupts;
- struct list_head ioports;
- struct mutex lock;
- u8 camera_power;
- u8 bluetooth_power;
- u8 wwan_power;
+ u8 camera_power;
+ u8 bluetooth_power;
+ u8 wwan_power;
};
static struct sony_pic_dev spic_dev = {
.ioports = LIST_HEAD_INIT(spic_dev.ioports),
};
+static int spic_drv_registered;
+
/* Event masks */
#define SONYPI_JOGGER_MASK 0x00000001
#define SONYPI_CAPTURE_MASK 0x00000002
return 1;
}
-static struct device_ctrl spic_types[] = {
- {
- .model = SONYPI_DEVICE_TYPE1,
- .handle_irq = NULL,
- .evport_offset = SONYPI_TYPE1_OFFSET,
- .event_types = type1_events,
- },
- {
- .model = SONYPI_DEVICE_TYPE2,
- .handle_irq = NULL,
- .evport_offset = SONYPI_TYPE2_OFFSET,
- .event_types = type2_events,
- },
- {
- .model = SONYPI_DEVICE_TYPE3,
- .handle_irq = type3_handle_irq,
- .evport_offset = SONYPI_TYPE3_OFFSET,
- .event_types = type3_events,
- },
-};
-
static void sony_pic_detect_device_type(struct sony_pic_dev *dev)
{
struct pci_dev *pcidev;
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
if (pcidev) {
- dev->control = &spic_types[0];
+ dev->model = SONYPI_DEVICE_TYPE1;
+ dev->evport_offset = SONYPI_TYPE1_OFFSET;
+ dev->event_types = type1_events;
goto out;
}
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_ICH6_1, NULL);
if (pcidev) {
- dev->control = &spic_types[2];
+ dev->model = SONYPI_DEVICE_TYPE2;
+ dev->evport_offset = SONYPI_TYPE2_OFFSET;
+ dev->event_types = type2_events;
goto out;
}
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_ICH7_1, NULL);
if (pcidev) {
- dev->control = &spic_types[2];
+ dev->model = SONYPI_DEVICE_TYPE3;
+ dev->handle_irq = type3_handle_irq;
+ dev->evport_offset = SONYPI_TYPE3_OFFSET;
+ dev->event_types = type3_events;
goto out;
}
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_ICH8_4, NULL);
if (pcidev) {
- dev->control = &spic_types[2];
+ dev->model = SONYPI_DEVICE_TYPE3;
+ dev->handle_irq = type3_handle_irq;
+ dev->evport_offset = SONYPI_TYPE3_OFFSET;
+ dev->event_types = type3_events;
goto out;
}
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_ICH9_1, NULL);
if (pcidev) {
- dev->control = &spic_types[2];
+ dev->model = SONYPI_DEVICE_TYPE3;
+ dev->handle_irq = type3_handle_irq;
+ dev->evport_offset = SONYPI_TYPE3_OFFSET;
+ dev->event_types = type3_events;
goto out;
}
/* default */
- dev->control = &spic_types[1];
+ dev->model = SONYPI_DEVICE_TYPE2;
+ dev->evport_offset = SONYPI_TYPE2_OFFSET;
+ dev->event_types = type2_events;
out:
if (pcidev)
pci_dev_put(pcidev);
printk(KERN_INFO DRV_PFX "detected Type%d model\n",
- dev->control->model == SONYPI_DEVICE_TYPE1 ? 1 :
- dev->control->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
+ dev->model == SONYPI_DEVICE_TYPE1 ? 1 :
+ dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
}
/* camera tests and poweron/poweroff */
buffer.pointer = resource;
/* setup Type 1 resources */
- if (spic_dev.control->model == SONYPI_DEVICE_TYPE1) {
+ if (spic_dev.model == SONYPI_DEVICE_TYPE1) {
/* setup io resources */
resource->res1.type = ACPI_RESOURCE_TYPE_IO;
data_mask = inb_p(dev->cur_ioport->io2.minimum);
else
data_mask = inb_p(dev->cur_ioport->io1.minimum +
- dev->control->evport_offset);
+ dev->evport_offset);
dprintk("event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n",
ev, data_mask, dev->cur_ioport->io1.minimum,
- dev->control->evport_offset);
+ dev->evport_offset);
if (ev == 0x00 || ev == 0xff)
return IRQ_HANDLED;
- for (i = 0; dev->control->event_types[i].mask; i++) {
+ for (i = 0; dev->event_types[i].mask; i++) {
- if ((data_mask & dev->control->event_types[i].data) !=
- dev->control->event_types[i].data)
+ if ((data_mask & dev->event_types[i].data) !=
+ dev->event_types[i].data)
continue;
- if (!(mask & dev->control->event_types[i].mask))
+ if (!(mask & dev->event_types[i].mask))
continue;
- for (j = 0; dev->control->event_types[i].events[j].event; j++) {
- if (ev == dev->control->event_types[i].events[j].data) {
+ for (j = 0; dev->event_types[i].events[j].event; j++) {
+ if (ev == dev->event_types[i].events[j].data) {
device_event =
- dev->control->
- event_types[i].events[j].event;
+ dev->event_types[i].events[j].event;
goto found;
}
}
/* Still not able to decode the event try to pass
* it over to the minidriver
*/
- if (dev->control->handle_irq &&
- dev->control->handle_irq(data_mask, ev) == 0)
+ if (dev->handle_irq && dev->handle_irq(data_mask, ev) == 0)
return IRQ_HANDLED;
dprintk("unknown event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n",
ev, data_mask, dev->cur_ioport->io1.minimum,
- dev->control->evport_offset);
+ dev->evport_offset);
return IRQ_HANDLED;
found:
/* request IRQ */
list_for_each_entry_reverse(irq, &spic_dev.interrupts, list) {
if (!request_irq(irq->irq.interrupts[0], sony_pic_irq,
- IRQF_SHARED, "sony-laptop", &spic_dev)) {
+ IRQF_DISABLED, "sony-laptop", &spic_dev)) {
dprintk("IRQ: %d - triggering: %d - "
"polarity: %d - shr: %d\n",
irq->irq.interrupts[0],
"Unable to register SPIC driver.");
goto out;
}
+ spic_drv_registered = 1;
}
result = acpi_bus_register_driver(&sony_nc_driver);
return 0;
out_unregister_pic:
- if (!no_spic)
+ if (spic_drv_registered)
acpi_bus_unregister_driver(&sony_pic_driver);
out:
return result;
static void __exit sony_laptop_exit(void)
{
acpi_bus_unregister_driver(&sony_nc_driver);
- if (!no_spic)
+ if (spic_drv_registered)
acpi_bus_unregister_driver(&sony_pic_driver);
}
*/
#define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020400
+#define TPACPI_SYSFS_VERSION 0x020500
/*
* Changelog:
TP_ACPI_WGSV_STATE_UWBPWR = 0x0020, /* UWB radio enabled */
};
+/* HKEY events */
+enum tpacpi_hkey_event_t {
+ /* Hotkey-related */
+ TP_HKEY_EV_HOTKEY_BASE = 0x1001, /* first hotkey (FN+F1) */
+ TP_HKEY_EV_BRGHT_UP = 0x1010, /* Brightness up */
+ TP_HKEY_EV_BRGHT_DOWN = 0x1011, /* Brightness down */
+ TP_HKEY_EV_VOL_UP = 0x1015, /* Volume up or unmute */
+ TP_HKEY_EV_VOL_DOWN = 0x1016, /* Volume down or unmute */
+ TP_HKEY_EV_VOL_MUTE = 0x1017, /* Mixer output mute */
+
+ /* Reasons for waking up from S3/S4 */
+ TP_HKEY_EV_WKUP_S3_UNDOCK = 0x2304, /* undock requested, S3 */
+ TP_HKEY_EV_WKUP_S4_UNDOCK = 0x2404, /* undock requested, S4 */
+ TP_HKEY_EV_WKUP_S3_BAYEJ = 0x2305, /* bay ejection req, S3 */
+ TP_HKEY_EV_WKUP_S4_BAYEJ = 0x2405, /* bay ejection req, S4 */
+ TP_HKEY_EV_WKUP_S3_BATLOW = 0x2313, /* battery empty, S3 */
+ TP_HKEY_EV_WKUP_S4_BATLOW = 0x2413, /* battery empty, S4 */
+
+ /* Auto-sleep after eject request */
+ TP_HKEY_EV_BAYEJ_ACK = 0x3003, /* bay ejection complete */
+ TP_HKEY_EV_UNDOCK_ACK = 0x4003, /* undock complete */
+
+ /* Misc bay events */
+ TP_HKEY_EV_OPTDRV_EJ = 0x3006, /* opt. drive tray ejected */
+
+ /* User-interface events */
+ TP_HKEY_EV_LID_CLOSE = 0x5001, /* laptop lid closed */
+ TP_HKEY_EV_LID_OPEN = 0x5002, /* laptop lid opened */
+ TP_HKEY_EV_TABLET_TABLET = 0x5009, /* tablet swivel up */
+ TP_HKEY_EV_TABLET_NOTEBOOK = 0x500a, /* tablet swivel down */
+ TP_HKEY_EV_PEN_INSERTED = 0x500b, /* tablet pen inserted */
+ TP_HKEY_EV_PEN_REMOVED = 0x500c, /* tablet pen removed */
+ TP_HKEY_EV_BRGHT_CHANGED = 0x5010, /* backlight control event */
+
+ /* Thermal events */
+ TP_HKEY_EV_ALARM_BAT_HOT = 0x6011, /* battery too hot */
+ TP_HKEY_EV_ALARM_BAT_XHOT = 0x6012, /* battery critically hot */
+ TP_HKEY_EV_ALARM_SENSOR_HOT = 0x6021, /* sensor too hot */
+ TP_HKEY_EV_ALARM_SENSOR_XHOT = 0x6022, /* sensor critically hot */
+ TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* thermal table changed */
+
+ /* Misc */
+ TP_HKEY_EV_RFKILL_CHANGED = 0x7000, /* rfkill switch changed */
+};
+
/****************************************************************************
* Main driver
*/
* Hotkey subdriver
*/
+/*
+ * ThinkPad firmware event model
+ *
+ * The ThinkPad firmware has two main event interfaces: normal ACPI
+ * notifications (which follow the ACPI standard), and a private event
+ * interface.
+ *
+ * The private event interface also issues events for the hotkeys. As
+ * the driver gained features, the event handling code ended up being
+ * built around the hotkey subdriver. This will need to be refactored
+ * to a more formal event API eventually.
+ *
+ * Some "hotkeys" are actually supposed to be used as event reports,
+ * such as "brightness has changed", "volume has changed", depending on
+ * the ThinkPad model and how the firmware is operating.
+ *
+ * Unlike other classes, hotkey-class events have mask/unmask control on
+ * non-ancient firmware. However, how it behaves changes a lot with the
+ * firmware model and version.
+ */
+
enum { /* hot key scan codes (derived from ACPI DSDT) */
TP_ACPI_HOTKEYSCAN_FNF1 = 0,
TP_ACPI_HOTKEYSCAN_FNF2,
TP_ACPI_HOTKEYSCAN_THINKPAD,
};
-enum { /* Keys available through NVRAM polling */
+enum { /* Keys/events available through NVRAM polling */
TPACPI_HKEY_NVRAM_KNOWN_MASK = 0x00fb88c0U,
TPACPI_HKEY_NVRAM_GOOD_MASK = 0x00fb8000U,
};
static struct mutex hotkey_thread_mutex;
/*
- * Acquire mutex to write poller control variables.
- * Increment hotkey_config_change when changing them.
+ * Acquire mutex to write poller control variables as an
+ * atomic block.
+ *
+ * Increment hotkey_config_change when changing them if you
+ * want the kthread to forget old state.
*
* See HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
*/
* hotkey poller control variables
*
* Must be atomic or readers will also need to acquire mutex
+ *
+ * HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
+ * should be used only when the changes need to be taken as
+ * a block, OR when one needs to force the kthread to forget
+ * old state.
*/
static u32 hotkey_source_mask; /* bit mask 0=ACPI,1=NVRAM */
static unsigned int hotkey_poll_freq = 10; /* Hz */
static int hotkey_autosleep_ack;
-static u32 hotkey_orig_mask;
-static u32 hotkey_all_mask;
-static u32 hotkey_reserved_mask;
-static u32 hotkey_mask;
+static u32 hotkey_orig_mask; /* events the BIOS had enabled */
+static u32 hotkey_all_mask; /* all events supported in fw */
+static u32 hotkey_reserved_mask; /* events better left disabled */
+static u32 hotkey_driver_mask; /* events needed by the driver */
+static u32 hotkey_user_mask; /* events visible to userspace */
+static u32 hotkey_acpi_mask; /* events enabled in firmware */
static unsigned int hotkey_report_mode;
static struct attribute_set *hotkey_dev_attributes;
+static void tpacpi_driver_event(const unsigned int hkey_event);
+static void hotkey_driver_event(const unsigned int scancode);
+
/* HKEY.MHKG() return bits */
#define TP_HOTKEY_TABLET_MASK (1 << 3)
}
/*
+ * Reads current event mask from firmware, and updates
+ * hotkey_acpi_mask accordingly. Also resets any bits
+ * from hotkey_user_mask that are unavailable to be
+ * delivered (shadow requirement of the userspace ABI).
+ *
* Call with hotkey_mutex held
*/
static int hotkey_mask_get(void)
{
- u32 m = 0;
-
if (tp_features.hotkey_mask) {
+ u32 m = 0;
+
if (!acpi_evalf(hkey_handle, &m, "DHKN", "d"))
return -EIO;
+
+ hotkey_acpi_mask = m;
+ } else {
+ /* no mask support doesn't mean no event support... */
+ hotkey_acpi_mask = hotkey_all_mask;
}
- HOTKEY_CONFIG_CRITICAL_START
- hotkey_mask = m | (hotkey_source_mask & hotkey_mask);
- HOTKEY_CONFIG_CRITICAL_END
+
+ /* sync userspace-visible mask */
+ hotkey_user_mask &= (hotkey_acpi_mask | hotkey_source_mask);
return 0;
}
+void static hotkey_mask_warn_incomplete_mask(void)
+{
+ /* log only what the user can fix... */
+ const u32 wantedmask = hotkey_driver_mask &
+ ~(hotkey_acpi_mask | hotkey_source_mask) &
+ (hotkey_all_mask | TPACPI_HKEY_NVRAM_KNOWN_MASK);
+
+ if (wantedmask)
+ printk(TPACPI_NOTICE
+ "required events 0x%08x not enabled!\n",
+ wantedmask);
+}
+
/*
+ * Set the firmware mask when supported
+ *
+ * Also calls hotkey_mask_get to update hotkey_acpi_mask.
+ *
+ * NOTE: does not set bits in hotkey_user_mask, but may reset them.
+ *
* Call with hotkey_mutex held
*/
static int hotkey_mask_set(u32 mask)
int i;
int rc = 0;
- if (tp_features.hotkey_mask) {
- if (!tp_warned.hotkey_mask_ff &&
- (mask == 0xffff || mask == 0xffffff ||
- mask == 0xffffffff)) {
- tp_warned.hotkey_mask_ff = 1;
- printk(TPACPI_NOTICE
- "setting the hotkey mask to 0x%08x is likely "
- "not the best way to go about it\n", mask);
- printk(TPACPI_NOTICE
- "please consider using the driver defaults, "
- "and refer to up-to-date thinkpad-acpi "
- "documentation\n");
- }
+ const u32 fwmask = mask & ~hotkey_source_mask;
- HOTKEY_CONFIG_CRITICAL_START
+ if (tp_features.hotkey_mask) {
for (i = 0; i < 32; i++) {
- u32 m = 1 << i;
- /* enable in firmware mask only keys not in NVRAM
- * mode, but enable the key in the cached hotkey_mask
- * regardless of mode, or the key will end up
- * disabled by hotkey_mask_get() */
if (!acpi_evalf(hkey_handle,
NULL, "MHKM", "vdd", i + 1,
- !!((mask & ~hotkey_source_mask) & m))) {
+ !!(mask & (1 << i)))) {
rc = -EIO;
break;
- } else {
- hotkey_mask = (hotkey_mask & ~m) | (mask & m);
}
}
- HOTKEY_CONFIG_CRITICAL_END
+ }
- /* hotkey_mask_get must be called unconditionally below */
- if (!hotkey_mask_get() && !rc &&
- (hotkey_mask & ~hotkey_source_mask) !=
- (mask & ~hotkey_source_mask)) {
- printk(TPACPI_NOTICE
- "requested hot key mask 0x%08x, but "
- "firmware forced it to 0x%08x\n",
- mask, hotkey_mask);
- }
- } else {
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- HOTKEY_CONFIG_CRITICAL_START
- hotkey_mask = mask & hotkey_source_mask;
- HOTKEY_CONFIG_CRITICAL_END
- hotkey_mask_get();
- if (hotkey_mask != mask) {
- printk(TPACPI_NOTICE
- "requested hot key mask 0x%08x, "
- "forced to 0x%08x (NVRAM poll mask is "
- "0x%08x): no firmware mask support\n",
- mask, hotkey_mask, hotkey_source_mask);
- }
-#else
- hotkey_mask_get();
- rc = -ENXIO;
-#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
+ /*
+ * We *must* make an inconditional call to hotkey_mask_get to
+ * refresh hotkey_acpi_mask and update hotkey_user_mask
+ *
+ * Take the opportunity to also log when we cannot _enable_
+ * a given event.
+ */
+ if (!hotkey_mask_get() && !rc && (fwmask & ~hotkey_acpi_mask)) {
+ printk(TPACPI_NOTICE
+ "asked for hotkey mask 0x%08x, but "
+ "firmware forced it to 0x%08x\n",
+ fwmask, hotkey_acpi_mask);
}
+ hotkey_mask_warn_incomplete_mask();
+
+ return rc;
+}
+
+/*
+ * Sets hotkey_user_mask and tries to set the firmware mask
+ *
+ * Call with hotkey_mutex held
+ */
+static int hotkey_user_mask_set(const u32 mask)
+{
+ int rc;
+
+ /* Give people a chance to notice they are doing something that
+ * is bound to go boom on their users sooner or later */
+ if (!tp_warned.hotkey_mask_ff &&
+ (mask == 0xffff || mask == 0xffffff ||
+ mask == 0xffffffff)) {
+ tp_warned.hotkey_mask_ff = 1;
+ printk(TPACPI_NOTICE
+ "setting the hotkey mask to 0x%08x is likely "
+ "not the best way to go about it\n", mask);
+ printk(TPACPI_NOTICE
+ "please consider using the driver defaults, "
+ "and refer to up-to-date thinkpad-acpi "
+ "documentation\n");
+ }
+
+ /* Try to enable what the user asked for, plus whatever we need.
+ * this syncs everything but won't enable bits in hotkey_user_mask */
+ rc = hotkey_mask_set((mask | hotkey_driver_mask) & ~hotkey_source_mask);
+
+ /* Enable the available bits in hotkey_user_mask */
+ hotkey_user_mask = mask & (hotkey_acpi_mask | hotkey_source_mask);
+
+ return rc;
+}
+
+/*
+ * Sets the driver hotkey mask.
+ *
+ * Can be called even if the hotkey subdriver is inactive
+ */
+static int tpacpi_hotkey_driver_mask_set(const u32 mask)
+{
+ int rc;
+
+ /* Do the right thing if hotkey_init has not been called yet */
+ if (!tp_features.hotkey) {
+ hotkey_driver_mask = mask;
+ return 0;
+ }
+
+ mutex_lock(&hotkey_mutex);
+
+ HOTKEY_CONFIG_CRITICAL_START
+ hotkey_driver_mask = mask;
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+ hotkey_source_mask |= (mask & ~hotkey_all_mask);
+#endif
+ HOTKEY_CONFIG_CRITICAL_END
+
+ rc = hotkey_mask_set((hotkey_acpi_mask | hotkey_driver_mask) &
+ ~hotkey_source_mask);
+ mutex_unlock(&hotkey_mutex);
+
return rc;
}
}
}
-static void tpacpi_input_send_key(unsigned int scancode)
+/* Do NOT call without validating scancode first */
+static void tpacpi_input_send_key(const unsigned int scancode)
{
- unsigned int keycode;
-
- keycode = hotkey_keycode_map[scancode];
+ const unsigned int keycode = hotkey_keycode_map[scancode];
if (keycode != KEY_RESERVED) {
mutex_lock(&tpacpi_inputdev_send_mutex);
}
}
+/* Do NOT call without validating scancode first */
+static void tpacpi_input_send_key_masked(const unsigned int scancode)
+{
+ hotkey_driver_event(scancode);
+ if (hotkey_user_mask & (1 << scancode))
+ tpacpi_input_send_key(scancode);
+}
+
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
static struct tp_acpi_drv_struct ibm_hotkey_acpidriver;
+/* Do NOT call without validating scancode first */
static void tpacpi_hotkey_send_key(unsigned int scancode)
{
- tpacpi_input_send_key(scancode);
+ tpacpi_input_send_key_masked(scancode);
if (hotkey_report_mode < 2) {
acpi_bus_generate_proc_event(ibm_hotkey_acpidriver.device,
- 0x80, 0x1001 + scancode);
+ 0x80, TP_HKEY_EV_HOTKEY_BASE + scancode);
}
}
-static void hotkey_read_nvram(struct tp_nvram_state *n, u32 m)
+static void hotkey_read_nvram(struct tp_nvram_state *n, const u32 m)
{
u8 d;
}
}
+static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
+ struct tp_nvram_state *newn,
+ const u32 event_mask)
+{
+
#define TPACPI_COMPARE_KEY(__scancode, __member) \
do { \
- if ((mask & (1 << __scancode)) && \
+ if ((event_mask & (1 << __scancode)) && \
oldn->__member != newn->__member) \
- tpacpi_hotkey_send_key(__scancode); \
+ tpacpi_hotkey_send_key(__scancode); \
} while (0)
#define TPACPI_MAY_SEND_KEY(__scancode) \
- do { if (mask & (1 << __scancode)) \
- tpacpi_hotkey_send_key(__scancode); } while (0)
+ do { \
+ if (event_mask & (1 << __scancode)) \
+ tpacpi_hotkey_send_key(__scancode); \
+ } while (0)
-static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
- struct tp_nvram_state *newn,
- u32 mask)
-{
TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_THINKPAD, thinkpad_toggle);
TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNSPACE, zoom_toggle);
TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNF7, display_toggle);
}
}
}
-}
#undef TPACPI_COMPARE_KEY
#undef TPACPI_MAY_SEND_KEY
+}
+/*
+ * Polling driver
+ *
+ * We track all events in hotkey_source_mask all the time, since
+ * most of them are edge-based. We only issue those requested by
+ * hotkey_user_mask or hotkey_driver_mask, though.
+ */
static int hotkey_kthread(void *data)
{
struct tp_nvram_state s[2];
- u32 mask;
+ u32 poll_mask, event_mask;
unsigned int si, so;
unsigned long t;
unsigned int change_detector, must_reset;
/* Initial state for compares */
mutex_lock(&hotkey_thread_data_mutex);
change_detector = hotkey_config_change;
- mask = hotkey_source_mask & hotkey_mask;
+ poll_mask = hotkey_source_mask;
+ event_mask = hotkey_source_mask &
+ (hotkey_driver_mask | hotkey_user_mask);
poll_freq = hotkey_poll_freq;
mutex_unlock(&hotkey_thread_data_mutex);
- hotkey_read_nvram(&s[so], mask);
+ hotkey_read_nvram(&s[so], poll_mask);
while (!kthread_should_stop()) {
if (t == 0) {
t = 0;
change_detector = hotkey_config_change;
}
- mask = hotkey_source_mask & hotkey_mask;
+ poll_mask = hotkey_source_mask;
+ event_mask = hotkey_source_mask &
+ (hotkey_driver_mask | hotkey_user_mask);
poll_freq = hotkey_poll_freq;
mutex_unlock(&hotkey_thread_data_mutex);
- if (likely(mask)) {
- hotkey_read_nvram(&s[si], mask);
+ if (likely(poll_mask)) {
+ hotkey_read_nvram(&s[si], poll_mask);
if (likely(si != so)) {
hotkey_compare_and_issue_event(&s[so], &s[si],
- mask);
+ event_mask);
}
}
/* call with hotkey_mutex held */
static void hotkey_poll_setup(bool may_warn)
{
- u32 hotkeys_to_poll = hotkey_source_mask & hotkey_mask;
+ const u32 poll_driver_mask = hotkey_driver_mask & hotkey_source_mask;
+ const u32 poll_user_mask = hotkey_user_mask & hotkey_source_mask;
- if (hotkeys_to_poll != 0 && hotkey_poll_freq > 0 &&
- (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) {
+ if (hotkey_poll_freq > 0 &&
+ (poll_driver_mask ||
+ (poll_user_mask && tpacpi_inputdev->users > 0))) {
if (!tpacpi_hotkey_task) {
tpacpi_hotkey_task = kthread_run(hotkey_kthread,
NULL, TPACPI_NVRAM_KTHREAD_NAME);
}
} else {
hotkey_poll_stop_sync();
- if (may_warn && hotkeys_to_poll != 0 &&
+ if (may_warn && (poll_driver_mask || poll_user_mask) &&
hotkey_poll_freq == 0) {
printk(TPACPI_NOTICE
- "hot keys 0x%08x require polling, "
- "which is currently disabled\n",
- hotkeys_to_poll);
+ "hot keys 0x%08x and/or events 0x%08x "
+ "require polling, which is currently "
+ "disabled\n",
+ poll_user_mask, poll_driver_mask);
}
}
}
if (!freq)
hotkey_poll_stop_sync();
- HOTKEY_CONFIG_CRITICAL_START
hotkey_poll_freq = freq;
- HOTKEY_CONFIG_CRITICAL_END
}
#else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
static void hotkey_inputdev_close(struct input_dev *dev)
{
/* disable hotkey polling when possible */
- if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING)
+ if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING &&
+ !(hotkey_source_mask & hotkey_driver_mask))
hotkey_poll_setup_safe(false);
}
struct device_attribute *attr,
char *buf)
{
- int res;
-
- if (mutex_lock_killable(&hotkey_mutex))
- return -ERESTARTSYS;
- res = hotkey_mask_get();
- mutex_unlock(&hotkey_mutex);
-
- return (res)?
- res : snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_mask);
+ return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_user_mask);
}
static ssize_t hotkey_mask_store(struct device *dev,
if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
- res = hotkey_mask_set(t);
+ res = hotkey_user_mask_set(t);
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
hotkey_poll_setup(true);
const char *buf, size_t count)
{
unsigned long t;
+ u32 r_ev;
+ int rc;
if (parse_strtoul(buf, 0xffffffffUL, &t) ||
((t & ~TPACPI_HKEY_NVRAM_KNOWN_MASK) != 0))
hotkey_source_mask = t;
HOTKEY_CONFIG_CRITICAL_END
+ rc = hotkey_mask_set((hotkey_user_mask | hotkey_driver_mask) &
+ ~hotkey_source_mask);
hotkey_poll_setup(true);
- hotkey_mask_set(hotkey_mask);
+
+ /* check if events needed by the driver got disabled */
+ r_ev = hotkey_driver_mask & ~(hotkey_acpi_mask & hotkey_all_mask)
+ & ~hotkey_source_mask & TPACPI_HKEY_NVRAM_KNOWN_MASK;
mutex_unlock(&hotkey_mutex);
+ if (rc < 0)
+ printk(TPACPI_ERR "hotkey_source_mask: failed to update the"
+ "firmware event mask!\n");
+
+ if (r_ev)
+ printk(TPACPI_NOTICE "hotkey_source_mask: "
+ "some important events were disabled: "
+ "0x%04x\n", r_ev);
+
tpacpi_disclose_usertask("hotkey_source_mask", "set to 0x%08lx\n", t);
- return count;
+ return (rc < 0) ? rc : count;
}
static struct device_attribute dev_attr_hotkey_source_mask =
static void hotkey_wakeup_reason_notify_change(void)
{
- if (tp_features.hotkey_mask)
- sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
- "wakeup_reason");
+ sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+ "wakeup_reason");
}
/* sysfs wakeup hotunplug_complete (pollable) -------------------------- */
static void hotkey_wakeup_hotunplug_complete_notify_change(void)
{
- if (tp_features.hotkey_mask)
- sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
- "wakeup_hotunplug_complete");
+ sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+ "wakeup_hotunplug_complete");
}
/* --------------------------------------------------------------------- */
static struct attribute *hotkey_attributes[] __initdata = {
&dev_attr_hotkey_enable.attr,
&dev_attr_hotkey_bios_enabled.attr,
+ &dev_attr_hotkey_bios_mask.attr,
&dev_attr_hotkey_report_mode.attr,
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+ &dev_attr_hotkey_wakeup_reason.attr,
+ &dev_attr_hotkey_wakeup_hotunplug_complete.attr,
&dev_attr_hotkey_mask.attr,
&dev_attr_hotkey_all_mask.attr,
&dev_attr_hotkey_recommended_mask.attr,
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
&dev_attr_hotkey_source_mask.attr,
&dev_attr_hotkey_poll_freq.attr,
#endif
};
-static struct attribute *hotkey_mask_attributes[] __initdata = {
- &dev_attr_hotkey_bios_mask.attr,
-#ifndef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- &dev_attr_hotkey_mask.attr,
- &dev_attr_hotkey_all_mask.attr,
- &dev_attr_hotkey_recommended_mask.attr,
-#endif
- &dev_attr_hotkey_wakeup_reason.attr,
- &dev_attr_hotkey_wakeup_hotunplug_complete.attr,
-};
-
/*
* Sync both the hw and sw blocking state of all switches
*/
kfree(hotkey_keycode_map);
- if (tp_features.hotkey) {
- dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
- "restoring original hot key mask\n");
- /* no short-circuit boolean operator below! */
- if ((hotkey_mask_set(hotkey_orig_mask) |
- hotkey_status_set(false)) != 0)
- printk(TPACPI_ERR
- "failed to restore hot key mask "
- "to BIOS defaults\n");
- }
+ dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
+ "restoring original HKEY status and mask\n");
+ /* yes, there is a bitwise or below, we want the
+ * functions to be called even if one of them fail */
+ if (((tp_features.hotkey_mask &&
+ hotkey_mask_set(hotkey_orig_mask)) |
+ hotkey_status_set(false)) != 0)
+ printk(TPACPI_ERR
+ "failed to restore hot key mask "
+ "to BIOS defaults\n");
}
static void __init hotkey_unmap(const unsigned int scancode)
}
}
+/*
+ * HKEY quirks:
+ * TPACPI_HK_Q_INIMASK: Supports FN+F3,FN+F4,FN+F12
+ */
+
+#define TPACPI_HK_Q_INIMASK 0x0001
+
+static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = {
+ TPACPI_Q_IBM('I', 'H', TPACPI_HK_Q_INIMASK), /* 600E */
+ TPACPI_Q_IBM('I', 'N', TPACPI_HK_Q_INIMASK), /* 600E */
+ TPACPI_Q_IBM('I', 'D', TPACPI_HK_Q_INIMASK), /* 770, 770E, 770ED */
+ TPACPI_Q_IBM('I', 'W', TPACPI_HK_Q_INIMASK), /* A20m */
+ TPACPI_Q_IBM('I', 'V', TPACPI_HK_Q_INIMASK), /* A20p */
+ TPACPI_Q_IBM('1', '0', TPACPI_HK_Q_INIMASK), /* A21e, A22e */
+ TPACPI_Q_IBM('K', 'U', TPACPI_HK_Q_INIMASK), /* A21e */
+ TPACPI_Q_IBM('K', 'X', TPACPI_HK_Q_INIMASK), /* A21m, A22m */
+ TPACPI_Q_IBM('K', 'Y', TPACPI_HK_Q_INIMASK), /* A21p, A22p */
+ TPACPI_Q_IBM('1', 'B', TPACPI_HK_Q_INIMASK), /* A22e */
+ TPACPI_Q_IBM('1', '3', TPACPI_HK_Q_INIMASK), /* A22m */
+ TPACPI_Q_IBM('1', 'E', TPACPI_HK_Q_INIMASK), /* A30/p (0) */
+ TPACPI_Q_IBM('1', 'C', TPACPI_HK_Q_INIMASK), /* R30 */
+ TPACPI_Q_IBM('1', 'F', TPACPI_HK_Q_INIMASK), /* R31 */
+ TPACPI_Q_IBM('I', 'Y', TPACPI_HK_Q_INIMASK), /* T20 */
+ TPACPI_Q_IBM('K', 'Z', TPACPI_HK_Q_INIMASK), /* T21 */
+ TPACPI_Q_IBM('1', '6', TPACPI_HK_Q_INIMASK), /* T22 */
+ TPACPI_Q_IBM('I', 'Z', TPACPI_HK_Q_INIMASK), /* X20, X21 */
+ TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */
+};
+
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
/* Requirements for changing the default keymaps:
KEY_UNKNOWN, /* 0x0D: FN+INSERT */
KEY_UNKNOWN, /* 0x0E: FN+DELETE */
- /* brightness: firmware always reacts to them, unless
- * X.org did some tricks in the radeon BIOS scratch
- * registers of *some* models */
+ /* brightness: firmware always reacts to them */
KEY_RESERVED, /* 0x0F: FN+HOME (brightness up) */
KEY_RESERVED, /* 0x10: FN+END (brightness down) */
int status;
int hkeyv;
+ unsigned long quirks;
+
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"initializing hotkey subdriver\n");
if (!tp_features.hotkey)
return 1;
+ quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable,
+ ARRAY_SIZE(tpacpi_hotkey_qtable));
+
tpacpi_disable_brightness_delay();
- hotkey_dev_attributes = create_attr_set(13, NULL);
+ /* MUST have enough space for all attributes to be added to
+ * hotkey_dev_attributes */
+ hotkey_dev_attributes = create_attr_set(
+ ARRAY_SIZE(hotkey_attributes) + 2,
+ NULL);
if (!hotkey_dev_attributes)
return -ENOMEM;
res = add_many_to_attr_set(hotkey_dev_attributes,
if (res)
goto err_exit;
- /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+ /* mask not supported on 600e/x, 770e, 770x, A21e, A2xm/p,
A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
for HKEY interface version 0x100 */
if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
* MHKV 0x100 in A31, R40, R40e,
* T4x, X31, and later
*/
- tp_features.hotkey_mask = 1;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"firmware HKEY interface version: 0x%x\n",
hkeyv);
+
+ /* Paranoia check AND init hotkey_all_mask */
+ if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+ "MHKA", "qd")) {
+ printk(TPACPI_ERR
+ "missing MHKA handler, "
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ /* Fallback: pre-init for FN+F3,F4,F12 */
+ hotkey_all_mask = 0x080cU;
+ } else {
+ tp_features.hotkey_mask = 1;
+ }
}
}
"hotkey masks are %s\n",
str_supported(tp_features.hotkey_mask));
- if (tp_features.hotkey_mask) {
- if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
- "MHKA", "qd")) {
- printk(TPACPI_ERR
- "missing MHKA handler, "
- "please report this to %s\n",
- TPACPI_MAIL);
- /* FN+F12, FN+F4, FN+F3 */
- hotkey_all_mask = 0x080cU;
- }
- }
+ /* Init hotkey_all_mask if not initialized yet */
+ if (!tp_features.hotkey_mask && !hotkey_all_mask &&
+ (quirks & TPACPI_HK_Q_INIMASK))
+ hotkey_all_mask = 0x080cU; /* FN+F12, FN+F4, FN+F3 */
- /* hotkey_source_mask *must* be zero for
- * the first hotkey_mask_get */
+ /* Init hotkey_acpi_mask and hotkey_orig_mask */
if (tp_features.hotkey_mask) {
+ /* hotkey_source_mask *must* be zero for
+ * the first hotkey_mask_get to return hotkey_orig_mask */
res = hotkey_mask_get();
if (res)
goto err_exit;
- hotkey_orig_mask = hotkey_mask;
- res = add_many_to_attr_set(
- hotkey_dev_attributes,
- hotkey_mask_attributes,
- ARRAY_SIZE(hotkey_mask_attributes));
- if (res)
- goto err_exit;
+ hotkey_orig_mask = hotkey_acpi_mask;
+ } else {
+ hotkey_orig_mask = hotkey_all_mask;
+ hotkey_acpi_mask = hotkey_all_mask;
}
#ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
}
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- if (tp_features.hotkey_mask) {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
- & ~hotkey_all_mask
- & ~hotkey_reserved_mask;
- } else {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
- & ~hotkey_reserved_mask;
- }
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+ & ~hotkey_all_mask
+ & ~hotkey_reserved_mask;
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"hotkey source mask 0x%08x, polling freq %u\n",
hotkey_exit();
return res;
}
- res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
- & ~hotkey_reserved_mask)
- | hotkey_orig_mask);
+ res = hotkey_mask_set(((hotkey_all_mask & ~hotkey_reserved_mask)
+ | hotkey_driver_mask)
+ & ~hotkey_source_mask);
if (res < 0 && res != -ENXIO) {
hotkey_exit();
return res;
}
+ hotkey_user_mask = (hotkey_acpi_mask | hotkey_source_mask)
+ & ~hotkey_reserved_mask;
+ vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
+ "initial masks: user=0x%08x, fw=0x%08x, poll=0x%08x\n",
+ hotkey_user_mask, hotkey_acpi_mask, hotkey_source_mask);
dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"legacy ibm/hotkey event reporting over procfs %s\n",
if (scancode > 0 && scancode < 0x21) {
scancode--;
if (!(hotkey_source_mask & (1 << scancode))) {
- tpacpi_input_send_key(scancode);
+ tpacpi_input_send_key_masked(scancode);
*send_acpi_ev = false;
} else {
*ignore_acpi_ev = true;
*ignore_acpi_ev = false;
switch (hkey) {
- case 0x2304: /* suspend, undock */
- case 0x2404: /* hibernation, undock */
+ case TP_HKEY_EV_WKUP_S3_UNDOCK: /* suspend, undock */
+ case TP_HKEY_EV_WKUP_S4_UNDOCK: /* hibernation, undock */
hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
*ignore_acpi_ev = true;
break;
- case 0x2305: /* suspend, bay eject */
- case 0x2405: /* hibernation, bay eject */
+ case TP_HKEY_EV_WKUP_S3_BAYEJ: /* suspend, bay eject */
+ case TP_HKEY_EV_WKUP_S4_BAYEJ: /* hibernation, bay eject */
hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
*ignore_acpi_ev = true;
break;
- case 0x2313: /* Battery on critical low level (S3) */
- case 0x2413: /* Battery on critical low level (S4) */
+ case TP_HKEY_EV_WKUP_S3_BATLOW: /* Battery on critical low level/S3 */
+ case TP_HKEY_EV_WKUP_S4_BATLOW: /* Battery on critical low level/S4 */
printk(TPACPI_ALERT
"EMERGENCY WAKEUP: battery almost empty\n");
/* how to auto-heal: */
*ignore_acpi_ev = false;
switch (hkey) {
- case 0x5010: /* Lenovo new BIOS: brightness changed */
- case 0x500b: /* X61t: tablet pen inserted into bay */
- case 0x500c: /* X61t: tablet pen removed from bay */
+ case TP_HKEY_EV_PEN_INSERTED: /* X61t: tablet pen inserted into bay */
+ case TP_HKEY_EV_PEN_REMOVED: /* X61t: tablet pen removed from bay */
return true;
- case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
- case 0x500a: /* X41t-X61t: swivel down (normal mode) */
+ case TP_HKEY_EV_TABLET_TABLET: /* X41t-X61t: tablet mode */
+ case TP_HKEY_EV_TABLET_NOTEBOOK: /* X41t-X61t: normal mode */
tpacpi_input_send_tabletsw();
hotkey_tablet_mode_notify_change();
*send_acpi_ev = false;
return true;
- case 0x5001:
- case 0x5002:
- /* LID switch events. Do not propagate */
+ case TP_HKEY_EV_LID_CLOSE: /* Lid closed */
+ case TP_HKEY_EV_LID_OPEN: /* Lid opened */
+ case TP_HKEY_EV_BRGHT_CHANGED: /* brightness changed */
+ /* do not propagate these events */
*ignore_acpi_ev = true;
return true;
*ignore_acpi_ev = false;
switch (hkey) {
- case 0x6011:
+ case TP_HKEY_EV_ALARM_BAT_HOT:
printk(TPACPI_CRIT
"THERMAL ALARM: battery is too hot!\n");
/* recommended action: warn user through gui */
return true;
- case 0x6012:
+ case TP_HKEY_EV_ALARM_BAT_XHOT:
printk(TPACPI_ALERT
"THERMAL EMERGENCY: battery is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
return true;
- case 0x6021:
+ case TP_HKEY_EV_ALARM_SENSOR_HOT:
printk(TPACPI_CRIT
"THERMAL ALARM: "
"a sensor reports something is too hot!\n");
/* recommended action: warn user through gui, that */
/* some internal component is too hot */
return true;
- case 0x6022:
+ case TP_HKEY_EV_ALARM_SENSOR_XHOT:
printk(TPACPI_ALERT
"THERMAL EMERGENCY: "
"a sensor reports something is extremely hot!\n");
/* recommended action: immediate sleep/hibernate */
return true;
- case 0x6030:
+ case TP_HKEY_EV_THM_TABLE_CHANGED:
printk(TPACPI_INFO
"EC reports that Thermal Table has changed\n");
/* recommended action: do nothing, we don't have
break;
case 3:
/* 0x3000-0x3FFF: bay-related wakeups */
- if (hkey == 0x3003) {
+ if (hkey == TP_HKEY_EV_BAYEJ_ACK) {
hotkey_autosleep_ack = 1;
printk(TPACPI_INFO
"bay ejected\n");
break;
case 4:
/* 0x4000-0x4FFF: dock-related wakeups */
- if (hkey == 0x4003) {
+ if (hkey == TP_HKEY_EV_UNDOCK_ACK) {
hotkey_autosleep_ack = 1;
printk(TPACPI_INFO
"undocked\n");
break;
case 7:
/* 0x7000-0x7FFF: misc */
- if (tp_features.hotkey_wlsw && hkey == 0x7000) {
+ if (tp_features.hotkey_wlsw &&
+ hkey == TP_HKEY_EV_RFKILL_CHANGED) {
tpacpi_send_radiosw_update();
send_acpi_ev = 0;
known_ev = true;
{
tpacpi_disable_brightness_delay();
- if (hotkey_mask_get())
+ if (hotkey_status_set(true) < 0 ||
+ hotkey_mask_set(hotkey_acpi_mask) < 0)
printk(TPACPI_ERR
- "error while trying to read hot key mask "
- "from firmware\n");
+ "error while attempting to reset the event "
+ "firmware interface\n");
+
tpacpi_send_radiosw_update();
hotkey_tablet_mode_notify_change();
hotkey_wakeup_reason_notify_change();
return res;
len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
- if (tp_features.hotkey_mask) {
- len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_mask);
+ if (hotkey_all_mask) {
+ len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_user_mask);
len += sprintf(p + len,
"commands:\tenable, disable, reset, <mask>\n");
} else {
if (mutex_lock_killable(&hotkey_mutex))
return -ERESTARTSYS;
- mask = hotkey_mask;
+ mask = hotkey_user_mask;
res = 0;
while ((cmd = next_cmd(&buf))) {
}
}
- if (!res)
+ if (!res) {
tpacpi_disclose_usertask("procfs hotkey",
"set mask to 0x%08x\n", mask);
-
- if (!res && mask != hotkey_mask)
- res = hotkey_mask_set(mask);
+ res = hotkey_user_mask_set(mask);
+ }
errexit:
mutex_unlock(&hotkey_mutex);
TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
&ibm_backlight_data);
if (IS_ERR(ibm_backlight_device)) {
+ int rc = PTR_ERR(ibm_backlight_device);
+ ibm_backlight_device = NULL;
printk(TPACPI_ERR "Could not register backlight device\n");
- return PTR_ERR(ibm_backlight_device);
+ return rc;
}
vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
"brightness is supported\n");
****************************************************************************
****************************************************************************/
+/*
+ * HKEY event callout for other subdrivers go here
+ * (yes, it is ugly, but it is quick, safe, and gets the job done
+ */
+static void tpacpi_driver_event(const unsigned int hkey_event)
+{
+}
+
+
+
+static void hotkey_driver_event(const unsigned int scancode)
+{
+ tpacpi_driver_event(TP_HKEY_EV_HOTKEY_BASE + scancode);
+}
+
/* sysfs name ---------------------------------------------------------- */
static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev,
struct device_attribute *attr,
acpi_handle temp = NULL;
acpi_status status;
struct pnp_dev *dev;
+ struct acpi_hardware_id *id;
/*
* If a PnPacpi device is not present , the device
if (dev->capabilities & PNP_CONFIGURABLE)
pnpacpi_parse_resource_option_data(dev);
- if (device->flags.compatible_ids) {
- struct acpica_device_id_list *cid_list = device->pnp.cid_list;
- int i;
-
- for (i = 0; i < cid_list->count; i++) {
- if (!ispnpidacpi(cid_list->ids[i].string))
- continue;
- pnp_add_id(dev, cid_list->ids[i].string);
- }
+ list_for_each_entry(id, &device->pnp.ids, list) {
+ if (!strcmp(id->id, acpi_device_hid(device)))
+ continue;
+ if (!ispnpidacpi(id->id))
+ continue;
+ pnp_add_id(dev, id->id);
}
/* clear out the damaged flags */
struct pnp_dev *pnp = _pnp;
/* true means it matched */
- return acpi->flags.hardware_id
- && !acpi_get_physical_device(acpi->handle)
- && compare_pnp_id(pnp->id, acpi->pnp.hardware_id);
+ return !acpi_get_physical_device(acpi->handle)
+ && compare_pnp_id(pnp->id, acpi_device_hid(acpi));
}
static int __init acpi_pnp_find_device(struct device *dev, acpi_handle * handle)
Say Y here to enable support APM status emulation using
battery class devices.
+config WM831X_POWER
+ tristate "WM831X PMU support"
+ depends on MFD_WM831X
+ help
+ Say Y here to enable support for the power management unit
+ provided by Wolfson Microelectronics WM831x PMICs.
+
config WM8350_POWER
tristate "WM8350 PMU support"
depends on MFD_WM8350
obj-$(CONFIG_PDA_POWER) += pda_power.o
obj-$(CONFIG_APM_POWER) += apm_power.o
+obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
struct device *w1_dev;
struct workqueue_struct *monitor_wqueue;
struct delayed_work monitor_work;
+ struct delayed_work set_charged_work;
};
static unsigned int cache_time = 1000;
module_param(pmod_enabled, bool, 0644);
MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+static unsigned int rated_capacity;
+module_param(rated_capacity, uint, 0644);
+MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
+
+static unsigned int current_accum;
+module_param(current_accum, uint, 0644);
+MODULE_PARM_DESC(current_accum, "current accumulator value");
+
/* Some batteries have their rated capacity stored a N * 10 mAh, while
* others use an index into this table. */
static int rated_capacities[] = {
di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 |
di->raw[DS2760_ACTIVE_FULL + 1];
- scale[0] = di->raw[DS2760_ACTIVE_FULL] << 8 |
- di->raw[DS2760_ACTIVE_FULL + 1];
+ /* If the full_active_uAh value is not given, fall back to the rated
+ * capacity. This is likely to happen when chips are not part of the
+ * battery pack and is therefore not bootstrapped. */
+ if (di->full_active_uAh == 0)
+ di->full_active_uAh = di->rated_capacity / 1000L;
+
+ scale[0] = di->full_active_uAh;
for (i = 1; i < 5; i++)
scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 2 + i];
if (di->rem_capacity > 100)
di->rem_capacity = 100;
- if (di->current_uA)
- di->life_sec = -((di->accum_current_uAh - di->empty_uAh) *
- 3600L) / di->current_uA;
+ if (di->current_uA >= 100L)
+ di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L)
+ / (di->current_uA / 100L);
else
di->life_sec = 0;
return 0;
}
+static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
+ unsigned int acr_val)
+{
+ unsigned char acr[2];
+
+ /* acr is in units of 0.25 mAh */
+ acr_val *= 4L;
+ acr_val /= 1000;
+
+ acr[0] = acr_val >> 8;
+ acr[1] = acr_val & 0xff;
+
+ if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+ dev_warn(di->dev, "ACR write failed\n");
+}
+
static void ds2760_battery_update_status(struct ds2760_device_info *di)
{
int old_charge_status = di->charge_status;
if (di->full_counter < 2) {
di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
} else {
- unsigned char acr[2];
- int acr_val;
-
- /* acr is in units of 0.25 mAh */
- acr_val = di->full_active_uAh * 4L / 1000;
-
- acr[0] = acr_val >> 8;
- acr[1] = acr_val & 0xff;
-
- if (w1_ds2760_write(di->w1_dev, acr,
- DS2760_CURRENT_ACCUM_MSB, 2) < 2)
- dev_warn(di->dev,
- "ACR reset failed\n");
-
di->charge_status = POWER_SUPPLY_STATUS_FULL;
+ ds2760_battery_set_current_accum(di,
+ di->full_active_uAh);
}
}
} else {
w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
}
+static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
+ unsigned char rated_capacity)
+{
+ if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
+ return;
+
+ w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
+ w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+ w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+}
+
static void ds2760_battery_work(struct work_struct *work)
{
struct ds2760_device_info *di = container_of(work,
queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10);
}
+
+static void ds2760_battery_set_charged_work(struct work_struct *work)
+{
+ char bias;
+ struct ds2760_device_info *di = container_of(work,
+ struct ds2760_device_info, set_charged_work.work);
+
+ dev_dbg(di->dev, "%s\n", __func__);
+
+ ds2760_battery_read_status(di);
+
+ /* When we get notified by external circuitry that the battery is
+ * considered fully charged now, we know that there is no current
+ * flow any more. However, the ds2760's internal current meter is
+ * too inaccurate to rely on - spec say something ~15% failure.
+ * Hence, we use the current offset bias register to compensate
+ * that error.
+ */
+
+ if (!power_supply_am_i_supplied(&di->bat))
+ return;
+
+ bias = (signed char) di->current_raw +
+ (signed char) di->raw[DS2760_CURRENT_OFFSET_BIAS];
+
+ dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
+
+ w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
+ w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+ w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+
+ /* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
+ * value won't be read back by ds2760_battery_read_status() */
+ di->raw[DS2760_CURRENT_OFFSET_BIAS] = bias;
+}
+
+static void ds2760_battery_set_charged(struct power_supply *psy)
+{
+ struct ds2760_device_info *di = to_ds2760_device_info(psy);
+
+ /* postpone the actual work by 20 secs. This is for debouncing GPIO
+ * signals and to let the current value settle. See AN4188. */
+ cancel_delayed_work(&di->set_charged_work);
+ queue_delayed_work(di->monitor_wqueue, &di->set_charged_work, HZ * 20);
+}
+
static int ds2760_battery_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
case POWER_SUPPLY_PROP_TEMP:
val->intval = di->temp_C;
break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ val->intval = di->life_sec;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = di->rem_capacity;
+ break;
default:
return -EINVAL;
}
POWER_SUPPLY_PROP_CHARGE_EMPTY,
POWER_SUPPLY_PROP_CHARGE_NOW,
POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
};
static int ds2760_battery_probe(struct platform_device *pdev)
di->bat.properties = ds2760_battery_props;
di->bat.num_properties = ARRAY_SIZE(ds2760_battery_props);
di->bat.get_property = ds2760_battery_get_property;
+ di->bat.set_charged = ds2760_battery_set_charged;
di->bat.external_power_changed =
ds2760_battery_external_power_changed;
di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
- retval = power_supply_register(&pdev->dev, &di->bat);
- if (retval) {
- dev_err(di->dev, "failed to register battery\n");
- goto batt_failed;
- }
-
/* enable sleep mode feature */
ds2760_battery_read_status(di);
status = di->raw[DS2760_STATUS_REG];
ds2760_battery_write_status(di, status);
+ /* set rated capacity from module param */
+ if (rated_capacity)
+ ds2760_battery_write_rated_capacity(di, rated_capacity);
+
+ /* set current accumulator if given as parameter.
+ * this should only be done for bootstrapping the value */
+ if (current_accum)
+ ds2760_battery_set_current_accum(di, current_accum);
+
+ retval = power_supply_register(&pdev->dev, &di->bat);
+ if (retval) {
+ dev_err(di->dev, "failed to register battery\n");
+ goto batt_failed;
+ }
+
INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
+ INIT_DELAYED_WORK(&di->set_charged_work,
+ ds2760_battery_set_charged_work);
di->monitor_wqueue = create_singlethread_workqueue(dev_name(&pdev->dev));
if (!di->monitor_wqueue) {
retval = -ESRCH;
cancel_rearming_delayed_workqueue(di->monitor_wqueue,
&di->monitor_work);
+ cancel_rearming_delayed_workqueue(di->monitor_wqueue,
+ &di->set_charged_work);
destroy_workqueue(di->monitor_wqueue);
power_supply_unregister(&di->bat);
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/types.h>
#include <linux/err.h>
+#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/jiffies.h>
if (ret)
return ret;
break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (ec_byte & BAT_STAT_TRICKLE)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ else if (ec_byte & BAT_STAT_CHARGING)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
case POWER_SUPPLY_PROP_PRESENT:
val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
BAT_STAT_TRICKLE));
return ret;
val->intval = ec_byte;
break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (ec_byte & BAT_STAT_LOW)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ else
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
case POWER_SUPPLY_PROP_TEMP:
ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
if (ret)
static enum power_supply_property olpc_bat_props[] = {
POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_TECHNOLOGY,
POWER_SUPPLY_PROP_VOLTAGE_AVG,
POWER_SUPPLY_PROP_CURRENT_AVG,
POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_MANUFACTURER,
.read = olpc_bat_eeprom_read,
};
+/* Allow userspace to see the specific error value pulled from the EC */
+
+static ssize_t olpc_bat_error_read(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ uint8_t ec_byte;
+ ssize_t ret;
+
+ ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", ec_byte);
+}
+
+static struct device_attribute olpc_bat_error = {
+ .attr = {
+ .name = "error",
+ .mode = S_IRUGO,
+ },
+ .show = olpc_bat_error_read,
+};
+
/*********************************************************************
* Initialisation
*********************************************************************/
if (ret)
goto eeprom_failed;
+ ret = device_create_file(olpc_bat.dev, &olpc_bat_error);
+ if (ret)
+ goto error_failed;
+
goto success;
+error_failed:
+ device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
eeprom_failed:
power_supply_unregister(&olpc_bat);
battery_failed:
static void __exit olpc_bat_exit(void)
{
+ device_remove_file(olpc_bat.dev, &olpc_bat_error);
device_remove_bin_file(olpc_bat.dev, &olpc_bat_eeprom);
power_supply_unregister(&olpc_bat);
power_supply_unregister(&olpc_ac);
#include <linux/power_supply.h>
#include "power_supply.h"
+/* exported for the APM Power driver, APM emulation */
struct class *power_supply_class;
+EXPORT_SYMBOL_GPL(power_supply_class);
static int __power_supply_changed_work(struct device *dev, void *data)
{
schedule_work(&psy->changed_work);
}
+EXPORT_SYMBOL_GPL(power_supply_changed);
static int __power_supply_am_i_supplied(struct device *dev, void *data)
{
return error;
}
+EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
static int __power_supply_is_system_supplied(struct device *dev, void *data)
{
return error;
}
+EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
+
+int power_supply_set_battery_charged(struct power_supply *psy)
+{
+ if (psy->type == POWER_SUPPLY_TYPE_BATTERY && psy->set_charged) {
+ psy->set_charged(psy);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(power_supply_set_battery_charged);
+
+static int power_supply_match_device_by_name(struct device *dev, void *data)
+{
+ const char *name = data;
+ struct power_supply *psy = dev_get_drvdata(dev);
+
+ return strcmp(psy->name, name) == 0;
+}
+
+struct power_supply *power_supply_get_by_name(char *name)
+{
+ struct device *dev = class_find_device(power_supply_class, NULL, name,
+ power_supply_match_device_by_name);
+
+ return dev ? dev_get_drvdata(dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_by_name);
int power_supply_register(struct device *parent, struct power_supply *psy)
{
success:
return rc;
}
+EXPORT_SYMBOL_GPL(power_supply_register);
void power_supply_unregister(struct power_supply *psy)
{
power_supply_remove_attrs(psy);
device_unregister(psy->dev);
}
+EXPORT_SYMBOL_GPL(power_supply_unregister);
static int __init power_supply_class_init(void)
{
class_destroy(power_supply_class);
}
-EXPORT_SYMBOL_GPL(power_supply_changed);
-EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
-EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
-EXPORT_SYMBOL_GPL(power_supply_register);
-EXPORT_SYMBOL_GPL(power_supply_unregister);
-
-/* exported for the APM Power driver, APM emulation */
-EXPORT_SYMBOL_GPL(power_supply_class);
-
subsys_initcall(power_supply_class_init);
module_exit(power_supply_class_exit);
static char *status_text[] = {
"Unknown", "Charging", "Discharging", "Not charging", "Full"
};
+ static char *charge_type[] = {
+ "Unknown", "N/A", "Trickle", "Fast"
+ };
static char *health_text[] = {
"Unknown", "Good", "Overheat", "Dead", "Over voltage",
"Unspecified failure", "Cold",
"Unknown", "NiMH", "Li-ion", "Li-poly", "LiFe", "NiCd",
"LiMn"
};
+ static char *capacity_level_text[] = {
+ "Unknown", "Critical", "Low", "Normal", "High", "Full"
+ };
ssize_t ret;
struct power_supply *psy = dev_get_drvdata(dev);
const ptrdiff_t off = attr - power_supply_attrs;
if (off == POWER_SUPPLY_PROP_STATUS)
return sprintf(buf, "%s\n", status_text[value.intval]);
+ else if (off == POWER_SUPPLY_PROP_CHARGE_TYPE)
+ return sprintf(buf, "%s\n", charge_type[value.intval]);
else if (off == POWER_SUPPLY_PROP_HEALTH)
return sprintf(buf, "%s\n", health_text[value.intval]);
else if (off == POWER_SUPPLY_PROP_TECHNOLOGY)
return sprintf(buf, "%s\n", technology_text[value.intval]);
+ else if (off == POWER_SUPPLY_PROP_CAPACITY_LEVEL)
+ return sprintf(buf, "%s\n", capacity_level_text[value.intval]);
else if (off >= POWER_SUPPLY_PROP_MODEL_NAME)
return sprintf(buf, "%s\n", value.strval);
static struct device_attribute power_supply_attrs[] = {
/* Properties of type `int' */
POWER_SUPPLY_ATTR(status),
+ POWER_SUPPLY_ATTR(charge_type),
POWER_SUPPLY_ATTR(health),
POWER_SUPPLY_ATTR(present),
POWER_SUPPLY_ATTR(online),
POWER_SUPPLY_ATTR(energy_now),
POWER_SUPPLY_ATTR(energy_avg),
POWER_SUPPLY_ATTR(capacity),
+ POWER_SUPPLY_ATTR(capacity_level),
POWER_SUPPLY_ATTR(temp),
POWER_SUPPLY_ATTR(temp_ambient),
POWER_SUPPLY_ATTR(time_to_empty_now),
--- /dev/null
+/*
+ * PMU driver for Wolfson Microelectronics wm831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/pmu.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+struct wm831x_power {
+ struct wm831x *wm831x;
+ struct power_supply wall;
+ struct power_supply backup;
+ struct power_supply usb;
+ struct power_supply battery;
+};
+
+static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & supply)
+ val->intval = 1;
+ else
+ val->intval = 0;
+
+ return 0;
+}
+
+static int wm831x_power_read_voltage(struct wm831x *wm831x,
+ enum wm831x_auxadc src,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = wm831x_auxadc_read_uv(wm831x, src);
+ if (ret >= 0)
+ val->intval = ret;
+
+ return ret;
+}
+
+/*********************************************************************
+ * WALL Power
+ *********************************************************************/
+static int wm831x_wall_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_wall_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ * USB Power
+ *********************************************************************/
+static int wm831x_usb_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ * Battery properties
+ *********************************************************************/
+
+struct chg_map {
+ int val;
+ int reg_val;
+};
+
+static struct chg_map trickle_ilims[] = {
+ { 50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT },
+};
+
+static struct chg_map vsels[] = {
+ { 4050, 0 << WM831X_CHG_VSEL_SHIFT },
+ { 4100, 1 << WM831X_CHG_VSEL_SHIFT },
+ { 4150, 2 << WM831X_CHG_VSEL_SHIFT },
+ { 4200, 3 << WM831X_CHG_VSEL_SHIFT },
+};
+
+static struct chg_map fast_ilims[] = {
+ { 0, 0 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 50, 1 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 100, 2 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 150, 3 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 200, 4 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 250, 5 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 300, 6 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 350, 7 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 400, 8 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 450, 9 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 500, 10 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 600, 11 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 700, 12 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 800, 13 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 900, 14 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT },
+};
+
+static struct chg_map eoc_iterms[] = {
+ { 20, 0 << WM831X_CHG_ITERM_SHIFT },
+ { 30, 1 << WM831X_CHG_ITERM_SHIFT },
+ { 40, 2 << WM831X_CHG_ITERM_SHIFT },
+ { 50, 3 << WM831X_CHG_ITERM_SHIFT },
+ { 60, 4 << WM831X_CHG_ITERM_SHIFT },
+ { 70, 5 << WM831X_CHG_ITERM_SHIFT },
+ { 80, 6 << WM831X_CHG_ITERM_SHIFT },
+ { 90, 7 << WM831X_CHG_ITERM_SHIFT },
+};
+
+static struct chg_map chg_times[] = {
+ { 60, 0 << WM831X_CHG_TIME_SHIFT },
+ { 90, 1 << WM831X_CHG_TIME_SHIFT },
+ { 120, 2 << WM831X_CHG_TIME_SHIFT },
+ { 150, 3 << WM831X_CHG_TIME_SHIFT },
+ { 180, 4 << WM831X_CHG_TIME_SHIFT },
+ { 210, 5 << WM831X_CHG_TIME_SHIFT },
+ { 240, 6 << WM831X_CHG_TIME_SHIFT },
+ { 270, 7 << WM831X_CHG_TIME_SHIFT },
+ { 300, 8 << WM831X_CHG_TIME_SHIFT },
+ { 330, 9 << WM831X_CHG_TIME_SHIFT },
+ { 360, 10 << WM831X_CHG_TIME_SHIFT },
+ { 390, 11 << WM831X_CHG_TIME_SHIFT },
+ { 420, 12 << WM831X_CHG_TIME_SHIFT },
+ { 450, 13 << WM831X_CHG_TIME_SHIFT },
+ { 480, 14 << WM831X_CHG_TIME_SHIFT },
+ { 510, 15 << WM831X_CHG_TIME_SHIFT },
+};
+
+static void wm831x_battey_apply_config(struct wm831x *wm831x,
+ struct chg_map *map, int count, int val,
+ int *reg, const char *name,
+ const char *units)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ if (val == map[i].val)
+ break;
+ if (i == count) {
+ dev_err(wm831x->dev, "Invalid %s %d%s\n",
+ name, val, units);
+ } else {
+ *reg |= map[i].reg_val;
+ dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units);
+ }
+}
+
+static void wm831x_config_battery(struct wm831x *wm831x)
+{
+ struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+ struct wm831x_battery_pdata *pdata;
+ int ret, reg1, reg2;
+
+ if (!wm831x_pdata || !wm831x_pdata->battery) {
+ dev_warn(wm831x->dev,
+ "No battery charger configuration\n");
+ return;
+ }
+
+ pdata = wm831x_pdata->battery;
+
+ reg1 = 0;
+ reg2 = 0;
+
+ if (!pdata->enable) {
+ dev_info(wm831x->dev, "Battery charger disabled\n");
+ return;
+ }
+
+ reg1 |= WM831X_CHG_ENA;
+ if (pdata->off_mask)
+ reg2 |= WM831X_CHG_OFF_MSK;
+ if (pdata->fast_enable)
+ reg1 |= WM831X_CHG_FAST;
+
+ wm831x_battey_apply_config(wm831x, trickle_ilims,
+ ARRAY_SIZE(trickle_ilims),
+ pdata->trickle_ilim, ®2,
+ "trickle charge current limit", "mA");
+
+ wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels),
+ pdata->vsel, ®2,
+ "target voltage", "mV");
+
+ wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims),
+ pdata->fast_ilim, ®2,
+ "fast charge current limit", "mA");
+
+ wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms),
+ pdata->eoc_iterm, ®1,
+ "end of charge current threshold", "mA");
+
+ wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times),
+ pdata->timeout, ®2,
+ "charger timeout", "min");
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+ return;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1,
+ WM831X_CHG_ENA_MASK |
+ WM831X_CHG_FAST_MASK |
+ WM831X_CHG_ITERM_MASK |
+ WM831X_CHG_ITERM_MASK,
+ reg1);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to set charger control 1: %d\n",
+ ret);
+
+ ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2,
+ WM831X_CHG_OFF_MSK |
+ WM831X_CHG_TIME_MASK |
+ WM831X_CHG_FAST_ILIM_MASK |
+ WM831X_CHG_TRKL_ILIM_MASK |
+ WM831X_CHG_VSEL_MASK,
+ reg2);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to set charger control 2: %d\n",
+ ret);
+
+ wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_bat_check_status(struct wm831x *wm831x, int *status)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & WM831X_PWR_SRC_BATT) {
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_OFF:
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case WM831X_CHG_STATE_TRICKLE:
+ case WM831X_CHG_STATE_FAST:
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+
+ default:
+ *status = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_check_type(struct wm831x *wm831x, int *type)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_TRICKLE:
+ case WM831X_CHG_STATE_TRICKLE_OT:
+ *type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case WM831X_CHG_STATE_FAST:
+ case WM831X_CHG_STATE_FAST_OT:
+ *type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ default:
+ *type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_check_health(struct wm831x *wm831x, int *health)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & WM831X_BATT_HOT_STS) {
+ *health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ return 0;
+ }
+
+ if (ret & WM831X_BATT_COLD_STS) {
+ *health = POWER_SUPPLY_HEALTH_COLD;
+ return 0;
+ }
+
+ if (ret & WM831X_BATT_OV_STS) {
+ *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ return 0;
+ }
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_TRICKLE_OT:
+ case WM831X_CHG_STATE_FAST_OT:
+ *health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+ case WM831X_CHG_STATE_DEFECTIVE:
+ *health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ default:
+ *health = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = wm831x_bat_check_status(wm831x, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT,
+ val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = wm831x_bat_check_health(wm831x, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = wm831x_bat_check_type(wm831x, &val->intval);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static const char *wm831x_bat_irqs[] = {
+ "BATT HOT",
+ "BATT COLD",
+ "BATT FAIL",
+ "OV",
+ "END",
+ "TO",
+ "MODE",
+ "START",
+};
+
+static irqreturn_t wm831x_bat_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq);
+
+ /* The battery charger is autonomous so we don't need to do
+ * anything except kick user space */
+ power_supply_changed(&wm831x_power->battery);
+
+ return IRQ_HANDLED;
+}
+
+
+/*********************************************************************
+ * Backup supply properties
+ *********************************************************************/
+
+static void wm831x_config_backup(struct wm831x *wm831x)
+{
+ struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+ struct wm831x_backup_pdata *pdata;
+ int ret, reg;
+
+ if (!wm831x_pdata || !wm831x_pdata->backup) {
+ dev_warn(wm831x->dev,
+ "No backup battery charger configuration\n");
+ return;
+ }
+
+ pdata = wm831x_pdata->backup;
+
+ reg = 0;
+
+ if (pdata->charger_enable)
+ reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
+ if (pdata->no_constant_voltage)
+ reg |= WM831X_BKUP_CHG_MODE;
+
+ switch (pdata->vlim) {
+ case 2500:
+ break;
+ case 3100:
+ reg |= WM831X_BKUP_CHG_VLIM;
+ break;
+ default:
+ dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
+ pdata->vlim);
+ }
+
+ switch (pdata->ilim) {
+ case 100:
+ break;
+ case 200:
+ reg |= 1;
+ break;
+ case 300:
+ reg |= 2;
+ break;
+ case 400:
+ reg |= 3;
+ break;
+ default:
+ dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
+ pdata->ilim);
+ }
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+ return;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
+ WM831X_BKUP_CHG_ENA_MASK |
+ WM831X_BKUP_CHG_MODE_MASK |
+ WM831X_BKUP_BATT_DET_ENA_MASK |
+ WM831X_BKUP_CHG_VLIM_MASK |
+ WM831X_BKUP_CHG_ILIM_MASK,
+ reg);
+ if (ret != 0)
+ dev_err(wm831x->dev,
+ "Failed to set backup charger config: %d\n", ret);
+
+ wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_backup_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev->parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (ret & WM831X_BKUP_CHG_STS)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
+ val);
+ break;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ if (ret & WM831X_BKUP_CHG_STS)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_backup_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+/*********************************************************************
+ * Initialisation
+ *********************************************************************/
+
+static irqreturn_t wm831x_syslo_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ /* Not much we can actually *do* but tell people for
+ * posterity, we're probably about to run out of power. */
+ dev_crit(wm831x->dev, "SYSVDD under voltage\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ dev_dbg(wm831x->dev, "Power source changed\n");
+
+ /* Just notify for everything - little harm in overnotifying.
+ * The backup battery is not a power source while the system
+ * is running so skip that.
+ */
+ power_supply_changed(&wm831x_power->battery);
+ power_supply_changed(&wm831x_power->usb);
+ power_supply_changed(&wm831x_power->wall);
+
+ return IRQ_HANDLED;
+}
+
+static __devinit int wm831x_power_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_power *power;
+ struct power_supply *usb;
+ struct power_supply *battery;
+ struct power_supply *wall;
+ struct power_supply *backup;
+ int ret, irq, i;
+
+ power = kzalloc(sizeof(struct wm831x_power), GFP_KERNEL);
+ if (power == NULL)
+ return -ENOMEM;
+
+ power->wm831x = wm831x;
+ platform_set_drvdata(pdev, power);
+
+ usb = &power->usb;
+ battery = &power->battery;
+ wall = &power->wall;
+ backup = &power->backup;
+
+ /* We ignore configuration failures since we can still read back
+ * the status without enabling either of the chargers.
+ */
+ wm831x_config_battery(wm831x);
+ wm831x_config_backup(wm831x);
+
+ wall->name = "wm831x-wall";
+ wall->type = POWER_SUPPLY_TYPE_MAINS;
+ wall->properties = wm831x_wall_props;
+ wall->num_properties = ARRAY_SIZE(wm831x_wall_props);
+ wall->get_property = wm831x_wall_get_prop;
+ ret = power_supply_register(&pdev->dev, wall);
+ if (ret)
+ goto err_kmalloc;
+
+ battery->name = "wm831x-battery";
+ battery->properties = wm831x_bat_props;
+ battery->num_properties = ARRAY_SIZE(wm831x_bat_props);
+ battery->get_property = wm831x_bat_get_prop;
+ battery->use_for_apm = 1;
+ ret = power_supply_register(&pdev->dev, battery);
+ if (ret)
+ goto err_wall;
+
+ usb->name = "wm831x-usb",
+ usb->type = POWER_SUPPLY_TYPE_USB;
+ usb->properties = wm831x_usb_props;
+ usb->num_properties = ARRAY_SIZE(wm831x_usb_props);
+ usb->get_property = wm831x_usb_get_prop;
+ ret = power_supply_register(&pdev->dev, usb);
+ if (ret)
+ goto err_battery;
+
+ backup->name = "wm831x-backup";
+ backup->type = POWER_SUPPLY_TYPE_BATTERY;
+ backup->properties = wm831x_backup_props;
+ backup->num_properties = ARRAY_SIZE(wm831x_backup_props);
+ backup->get_property = wm831x_backup_get_prop;
+ ret = power_supply_register(&pdev->dev, backup);
+ if (ret)
+ goto err_usb;
+
+ irq = platform_get_irq_byname(pdev, "SYSLO");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_syslo_irq,
+ IRQF_TRIGGER_RISING, "SYSLO",
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
+ irq, ret);
+ goto err_backup;
+ }
+
+ irq = platform_get_irq_byname(pdev, "PWR SRC");
+ ret = wm831x_request_irq(wm831x, irq, wm831x_pwr_src_irq,
+ IRQF_TRIGGER_RISING, "Power source",
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n",
+ irq, ret);
+ goto err_syslo;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+ ret = wm831x_request_irq(wm831x, irq, wm831x_bat_irq,
+ IRQF_TRIGGER_RISING,
+ wm831x_bat_irqs[i],
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "Failed to request %s IRQ %d: %d\n",
+ wm831x_bat_irqs[i], irq, ret);
+ goto err_bat_irq;
+ }
+ }
+
+ return ret;
+
+err_bat_irq:
+ for (; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+ wm831x_free_irq(wm831x, irq, power);
+ }
+ irq = platform_get_irq_byname(pdev, "PWR SRC");
+ wm831x_free_irq(wm831x, irq, power);
+err_syslo:
+ irq = platform_get_irq_byname(pdev, "SYSLO");
+ wm831x_free_irq(wm831x, irq, power);
+err_backup:
+ power_supply_unregister(backup);
+err_usb:
+ power_supply_unregister(usb);
+err_battery:
+ power_supply_unregister(battery);
+err_wall:
+ power_supply_unregister(wall);
+err_kmalloc:
+ kfree(power);
+ return ret;
+}
+
+static __devexit int wm831x_power_remove(struct platform_device *pdev)
+{
+ struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int irq, i;
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+ wm831x_free_irq(wm831x, irq, wm831x_power);
+ }
+
+ irq = platform_get_irq_byname(pdev, "PWR SRC");
+ wm831x_free_irq(wm831x, irq, wm831x_power);
+
+ irq = platform_get_irq_byname(pdev, "SYSLO");
+ wm831x_free_irq(wm831x, irq, wm831x_power);
+
+ power_supply_unregister(&wm831x_power->backup);
+ power_supply_unregister(&wm831x_power->battery);
+ power_supply_unregister(&wm831x_power->wall);
+ power_supply_unregister(&wm831x_power->usb);
+ return 0;
+}
+
+static struct platform_driver wm831x_power_driver = {
+ .probe = wm831x_power_probe,
+ .remove = __devexit_p(wm831x_power_remove),
+ .driver = {
+ .name = "wm831x-power",
+ },
+};
+
+static int __init wm831x_power_init(void)
+{
+ return platform_driver_register(&wm831x_power_driver);
+}
+module_init(wm831x_power_init);
+
+static void __exit wm831x_power_exit(void)
+{
+ platform_driver_unregister(&wm831x_power_driver);
+}
+module_exit(wm831x_power_exit);
+
+MODULE_DESCRIPTION("Power supply driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-power");
return POWER_SUPPLY_HEALTH_GOOD;
}
+static int wm8350_bat_get_charge_type(struct wm8350 *wm8350)
+{
+ int state;
+
+ state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) &
+ WM8350_CHG_STS_MASK;
+ switch (state) {
+ case WM8350_CHG_STS_OFF:
+ return POWER_SUPPLY_CHARGE_TYPE_NONE;
+ case WM8350_CHG_STS_TRICKLE:
+ return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ case WM8350_CHG_STS_FAST:
+ return POWER_SUPPLY_CHARGE_TYPE_FAST;
+ default:
+ return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ }
+}
+
static int wm8350_bat_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
case POWER_SUPPLY_PROP_HEALTH:
val->intval = wm8350_bat_check_health(wm8350);
break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = wm8350_bat_get_charge_type(wm8350);
+ break;
default:
ret = -EINVAL;
break;
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_VOLTAGE_NOW,
POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
};
/*********************************************************************
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
-#include <linux/wm97xx_batt.h>
+#include <linux/irq.h>
static DEFINE_MUTEX(bat_lock);
static struct work_struct bat_work;
struct mutex work_lock;
static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
-static struct wm97xx_batt_info *pdata;
+static struct wm97xx_batt_info *gpdata;
static enum power_supply_property *prop;
static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
{
+ struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
+ struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
+
return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
pdata->batt_aux) * pdata->batt_mult /
pdata->batt_div;
static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
{
+ struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
+ struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
+
return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev->parent),
pdata->temp_aux) * pdata->temp_mult /
pdata->temp_div;
enum power_supply_property psp,
union power_supply_propval *val)
{
+ struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
+ struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
+
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
val->intval = bat_status;
static void wm97xx_bat_update(struct power_supply *bat_ps)
{
int old_status = bat_status;
+ struct wm97xx_pdata *wmdata = bat_ps->dev->parent->platform_data;
+ struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
mutex_lock(&work_lock);
wm97xx_bat_update(&bat_ps);
}
+static irqreturn_t wm97xx_chrg_irq(int irq, void *data)
+{
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
#ifdef CONFIG_PM
-static int wm97xx_bat_suspend(struct platform_device *dev, pm_message_t state)
+static int wm97xx_bat_suspend(struct device *dev)
{
flush_scheduled_work();
return 0;
}
-static int wm97xx_bat_resume(struct platform_device *dev)
+static int wm97xx_bat_resume(struct device *dev)
{
schedule_work(&bat_work);
return 0;
}
-#else
-#define wm97xx_bat_suspend NULL
-#define wm97xx_bat_resume NULL
+
+static struct dev_pm_ops wm97xx_bat_pm_ops = {
+ .suspend = wm97xx_bat_suspend,
+ .resume = wm97xx_bat_resume,
+};
#endif
static int __devinit wm97xx_bat_probe(struct platform_device *dev)
int ret = 0;
int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
int i = 0;
+ struct wm97xx_pdata *wmdata = dev->dev.platform_data;
+ struct wm97xx_batt_pdata *pdata;
+
+ if (gpdata) {
+ dev_err(&dev->dev, "Do not pass platform_data through "
+ "wm97xx_bat_set_pdata!\n");
+ return -EINVAL;
+ } else
+ pdata = wmdata->batt_pdata;
if (dev->id != -1)
return -EINVAL;
mutex_init(&work_lock);
if (!pdata) {
- dev_err(&dev->dev, "Please use wm97xx_bat_set_pdata\n");
+ dev_err(&dev->dev, "No platform_data supplied\n");
return -EINVAL;
}
- if (pdata->charge_gpio >= 0 && gpio_is_valid(pdata->charge_gpio)) {
+ if (gpio_is_valid(pdata->charge_gpio)) {
ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
if (ret)
goto err;
ret = gpio_direction_input(pdata->charge_gpio);
+ if (ret)
+ goto err2;
+ ret = request_irq(gpio_to_irq(pdata->charge_gpio),
+ wm97xx_chrg_irq, IRQF_DISABLED,
+ "AC Detect", 0);
if (ret)
goto err2;
props++; /* POWER_SUPPLY_PROP_STATUS */
prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
if (!prop)
- goto err2;
+ goto err3;
prop[i++] = POWER_SUPPLY_PROP_PRESENT;
if (pdata->charge_gpio >= 0)
if (!ret)
schedule_work(&bat_work);
else
- goto err3;
+ goto err4;
return 0;
-err3:
+err4:
kfree(prop);
+err3:
+ if (gpio_is_valid(pdata->charge_gpio))
+ free_irq(gpio_to_irq(pdata->charge_gpio), dev);
err2:
- gpio_free(pdata->charge_gpio);
+ if (gpio_is_valid(pdata->charge_gpio))
+ gpio_free(pdata->charge_gpio);
err:
return ret;
}
static int __devexit wm97xx_bat_remove(struct platform_device *dev)
{
- if (pdata && pdata->charge_gpio && pdata->charge_gpio >= 0)
+ struct wm97xx_pdata *wmdata = dev->dev.platform_data;
+ struct wm97xx_batt_pdata *pdata = wmdata->batt_pdata;
+
+ if (pdata && gpio_is_valid(pdata->charge_gpio)) {
+ free_irq(gpio_to_irq(pdata->charge_gpio), dev);
gpio_free(pdata->charge_gpio);
+ }
flush_scheduled_work();
power_supply_unregister(&bat_ps);
kfree(prop);
.driver = {
.name = "wm97xx-battery",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &wm97xx_bat_pm_ops,
+#endif
},
.probe = wm97xx_bat_probe,
.remove = __devexit_p(wm97xx_bat_remove),
- .suspend = wm97xx_bat_suspend,
- .resume = wm97xx_bat_resume,
};
static int __init wm97xx_bat_init(void)
platform_driver_unregister(&wm97xx_bat_driver);
}
-void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
+void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data)
{
- pdata = data;
+ gpdata = data;
}
EXPORT_SYMBOL_GPL(wm97xx_bat_set_pdata);
*/
#include <linux/rtc.h>
+#include <linux/sched.h>
#include <linux/log2.h>
int rtc_read_time(struct rtc_device *rtc, struct rtc_time *tm)
#include <linux/module.h>
#include <linux/rtc.h>
+#include <linux/sched.h>
#include "rtc-core.h"
static dev_t rtc_devt;
}
#ifdef CONFIG_PM
-static int pxa_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int pxa_rtc_suspend(struct device *dev)
{
- struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+ struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(dev))
enable_irq_wake(pxa_rtc->irq_Alrm);
return 0;
}
-static int pxa_rtc_resume(struct platform_device *pdev)
+static int pxa_rtc_resume(struct device *dev)
{
- struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+ struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(dev))
disable_irq_wake(pxa_rtc->irq_Alrm);
return 0;
}
-#else
-#define pxa_rtc_suspend NULL
-#define pxa_rtc_resume NULL
+
+static struct dev_pm_ops pxa_rtc_pm_ops = {
+ .suspend = pxa_rtc_suspend,
+ .resume = pxa_rtc_resume,
+};
#endif
static struct platform_driver pxa_rtc_driver = {
.remove = __exit_p(pxa_rtc_remove),
- .suspend = pxa_rtc_suspend,
- .resume = pxa_rtc_resume,
.driver = {
- .name = "pxa-rtc",
+ .name = "pxa-rtc",
+#ifdef CONFIG_PM
+ .pm = &pxa_rtc_pm_ops,
+#endif
},
};
}
#ifdef CONFIG_PM
-static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int sa1100_rtc_suspend(struct device *dev)
{
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(dev))
enable_irq_wake(IRQ_RTCAlrm);
return 0;
}
-static int sa1100_rtc_resume(struct platform_device *pdev)
+static int sa1100_rtc_resume(struct device *dev)
{
- if (device_may_wakeup(&pdev->dev))
+ if (device_may_wakeup(dev))
disable_irq_wake(IRQ_RTCAlrm);
return 0;
}
-#else
-#define sa1100_rtc_suspend NULL
-#define sa1100_rtc_resume NULL
+
+static struct dev_pm_ops sa1100_rtc_pm_ops = {
+ .suspend = sa1100_rtc_suspend,
+ .resume = sa1100_rtc_resume,
+};
#endif
static struct platform_driver sa1100_rtc_driver = {
.probe = sa1100_rtc_probe,
.remove = sa1100_rtc_remove,
- .suspend = sa1100_rtc_suspend,
- .resume = sa1100_rtc_resume,
.driver = {
- .name = "sa1100-rtc",
+ .name = "sa1100-rtc",
+#ifdef CONFIG_PM
+ .pm = &sa1100_rtc_pm_ops,
+#endif
},
};
device->stopped &= ~DASD_UNRESUMED_PM;
dasd_schedule_device_bh(device);
- if (device->block)
- dasd_schedule_block_bh(device->block);
if (device->discipline->restore)
rc = device->discipline->restore(device);
*/
device->stopped |= DASD_UNRESUMED_PM;
+ if (device->block)
+ dasd_schedule_block_bh(device->block);
+
dasd_put_device(device);
return 0;
}
{
struct dasd_ccw_req *cqr;
struct ccw1 *ccw;
+ unsigned long *idaw;
cqr = dasd_smalloc_request(magic, 1 /* RDC */, rdc_buffer_size, device);
ccw = cqr->cpaddr;
ccw->cmd_code = CCW_CMD_RDC;
- ccw->cda = (__u32)(addr_t)rdc_buffer;
- ccw->count = rdc_buffer_size;
+ if (idal_is_needed(rdc_buffer, rdc_buffer_size)) {
+ idaw = (unsigned long *) (cqr->data);
+ ccw->cda = (__u32)(addr_t) idaw;
+ ccw->flags = CCW_FLAG_IDA;
+ idaw = idal_create_words(idaw, rdc_buffer, rdc_buffer_size);
+ } else {
+ ccw->cda = (__u32)(addr_t) rdc_buffer;
+ ccw->flags = 0;
+ }
+ ccw->count = rdc_buffer_size;
cqr->startdev = device;
cqr->memdev = device;
cqr->expires = 10*HZ;
/* Calculate number of blocks/records per track. */
blksize = block->bp_block;
blk_per_trk = recs_per_track(&private->rdc_data, 0, blksize);
+ if (blk_per_trk == 0)
+ return ERR_PTR(-EINVAL);
/* Calculate record id of first and last block. */
first_rec = first_trk = blk_rq_pos(req) >> block->s2b_shift;
first_offs = sector_div(first_trk, blk_per_trk);
int dasd_eckd_restore_device(struct dasd_device *device)
{
struct dasd_eckd_private *private;
+ struct dasd_eckd_characteristics temp_rdc_data;
int is_known, rc;
struct dasd_uid temp_uid;
+ unsigned long flags;
private = (struct dasd_eckd_private *) device->private;
rc = dasd_eckd_generate_uid(device, &private->uid);
dasd_get_uid(device->cdev, &temp_uid);
if (memcmp(&private->uid, &temp_uid, sizeof(struct dasd_uid)) != 0)
- dev_err(&device->cdev->dev, "The UID of the DASD has changed\n");
+ dev_err(&device->cdev->dev, "The UID of the DASD has "
+ "changed\n");
if (rc)
goto out_err;
dasd_set_uid(device->cdev, &private->uid);
dasd_eckd_read_features(device);
/* Read Device Characteristics */
- memset(&private->rdc_data, 0, sizeof(private->rdc_data));
rc = dasd_generic_read_dev_chars(device, DASD_ECKD_MAGIC,
- &private->rdc_data, 64);
+ &temp_rdc_data, 64);
if (rc) {
DBF_EVENT(DBF_WARNING,
"Read device characteristics failed, rc=%d for "
"device: %s", rc, dev_name(&device->cdev->dev));
goto out_err;
}
+ spin_lock_irqsave(get_ccwdev_lock(device->cdev), flags);
+ memcpy(&private->rdc_data, &temp_rdc_data, sizeof(temp_rdc_data));
+ spin_unlock_irqrestore(get_ccwdev_lock(device->cdev), flags);
/* add device to alias management */
dasd_alias_add_device(device);
void raw3270_pm_unfreeze(struct raw3270_view *view)
{
+#ifdef CONFIG_TN3270_CONSOLE
struct raw3270 *rp;
rp = view->dev;
if (rp && test_bit(RAW3270_FLAGS_FROZEN, &rp->flags))
ccw_device_force_console();
+#endif
}
static struct ccw_device_id raw3270_id[] = {
static int sclp_async_send_wait(char *message);
static struct ctl_table_header *callhome_sysctl_header;
static DEFINE_SPINLOCK(sclp_async_lock);
-static char nodename[64];
#define SCLP_NORMAL_WRITE 0x00
struct async_evbuf {
static int call_home_on_panic(struct notifier_block *self,
unsigned long event, void *data)
{
- strncat(data, nodename, strlen(nodename));
- sclp_async_send_wait(data);
- return NOTIFY_DONE;
+ strncat(data, init_utsname()->nodename,
+ sizeof(init_utsname()->nodename));
+ sclp_async_send_wait(data);
+ return NOTIFY_DONE;
}
static struct notifier_block call_home_panic_nb = {
.priority = INT_MAX,
};
-static int proc_handler_callhome(ctl_table *ctl, int write, struct file *filp,
+static int proc_handler_callhome(struct ctl_table *ctl, int write,
void __user *buffer, size_t *count,
loff_t *ppos)
{
unsigned long val;
int len, rc;
- char buf[2];
+ char buf[3];
- if (!*count | (*ppos && !write)) {
+ if (!*count || (*ppos && !write)) {
*count = 0;
return 0;
}
if (!write) {
- len = sprintf(buf, "%d\n", callhome_enabled);
- buf[len] = '\0';
+ len = snprintf(buf, sizeof(buf), "%d\n", callhome_enabled);
rc = copy_to_user(buffer, buf, sizeof(buf));
if (rc != 0)
return -EFAULT;
{
.procname = "callhome",
.mode = 0644,
- .proc_handler = &proc_handler_callhome,
+ .proc_handler = proc_handler_callhome,
},
{ .ctl_name = 0 }
};
rc = sclp_register(&sclp_async_register);
if (rc)
return rc;
- callhome_sysctl_header = register_sysctl_table(kern_dir_table);
- if (!callhome_sysctl_header) {
- rc = -ENOMEM;
- goto out_sclp;
- }
- if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK)) {
- rc = -EOPNOTSUPP;
+ rc = -EOPNOTSUPP;
+ if (!(sclp_async_register.sclp_receive_mask & EVTYP_ASYNC_MASK))
goto out_sclp;
- }
rc = -ENOMEM;
+ callhome_sysctl_header = register_sysctl_table(kern_dir_table);
+ if (!callhome_sysctl_header)
+ goto out_sclp;
request = kzalloc(sizeof(struct sclp_req), GFP_KERNEL);
- if (!request)
- goto out_sys;
sccb = (struct sclp_async_sccb *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
- if (!sccb)
+ if (!request || !sccb)
goto out_mem;
- rc = atomic_notifier_chain_register(&panic_notifier_list,
- &call_home_panic_nb);
- if (rc)
- goto out_mem;
-
- strncpy(nodename, init_utsname()->nodename, 64);
- return 0;
-
+ rc = atomic_notifier_chain_register(&panic_notifier_list,
+ &call_home_panic_nb);
+ if (!rc)
+ goto out;
out_mem:
kfree(request);
free_page((unsigned long) sccb);
-out_sys:
unregister_sysctl_table(callhome_sysctl_header);
out_sclp:
sclp_unregister(&sclp_async_register);
+out:
return rc;
-
}
module_init(sclp_async_init);
}
__initcall(sclp_vt220_tty_init);
-#ifdef CONFIG_SCLP_VT220_CONSOLE
-
-static void
-sclp_vt220_con_write(struct console *con, const char *buf, unsigned int count)
-{
- __sclp_vt220_write((const unsigned char *) buf, count, 1, 1, 0);
-}
-
-static struct tty_driver *
-sclp_vt220_con_device(struct console *c, int *index)
-{
- *index = 0;
- return sclp_vt220_driver;
-}
-
static void __sclp_vt220_flush_buffer(void)
{
unsigned long flags;
}
}
+#ifdef CONFIG_SCLP_VT220_CONSOLE
+
+static void
+sclp_vt220_con_write(struct console *con, const char *buf, unsigned int count)
+{
+ __sclp_vt220_write((const unsigned char *) buf, count, 1, 1, 0);
+}
+
+static struct tty_driver *
+sclp_vt220_con_device(struct console *c, int *index)
+{
+ *index = 0;
+ return sclp_vt220_driver;
+}
+
static int
sclp_vt220_notify(struct notifier_block *self,
unsigned long event, void *data)
spin_lock_irq(&device->blk_data.request_queue_lock);
while (
!blk_queue_plugged(queue) &&
- (req = blk_fetch_request(queue)) &&
+ blk_peek_request(queue) &&
nr_queued < TAPEBLOCK_MIN_REQUEUE
) {
+ req = blk_fetch_request(queue);
if (rq_data_dir(req) == WRITE) {
DBF_EVENT(1, "TBLOCK: Rejecting write request\n");
spin_unlock_irq(&device->blk_data.request_queue_lock);
#include <linux/init.h>
#include <linux/miscdevice.h>
-#include <linux/utsname.h>
#include <linux/debugfs.h>
#include <asm/ipl.h>
#include <asm/sclp.h>
static void *
cio_ignore_proc_seq_start(struct seq_file *s, loff_t *offset)
{
- struct ccwdev_iter *iter;
+ struct ccwdev_iter *iter = s->private;
if (*offset >= (__MAX_SUBCHANNEL + 1) * (__MAX_SSID + 1))
return NULL;
- iter = kzalloc(sizeof(struct ccwdev_iter), GFP_KERNEL);
- if (!iter)
- return ERR_PTR(-ENOMEM);
+ memset(iter, 0, sizeof(*iter));
iter->ssid = *offset / (__MAX_SUBCHANNEL + 1);
iter->devno = *offset % (__MAX_SUBCHANNEL + 1);
return iter;
static void
cio_ignore_proc_seq_stop(struct seq_file *s, void *it)
{
- if (!IS_ERR(it))
- kfree(it);
}
static void *
static int
cio_ignore_proc_open(struct inode *inode, struct file *file)
{
- return seq_open(file, &cio_ignore_proc_seq_ops);
+ return seq_open_private(file, &cio_ignore_proc_seq_ops,
+ sizeof(struct ccwdev_iter));
}
static const struct file_operations cio_ignore_proc_fops = {
.open = cio_ignore_proc_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release,
+ .release = seq_release_private,
.write = cio_ignore_write,
};
chp->state = 1;
chp->dev.parent = &channel_subsystems[chpid.cssid]->device;
chp->dev.release = chp_release;
- dev_set_name(&chp->dev, "chp%x.%02x", chpid.cssid, chpid.id);
/* Obtain channel path description and fill it in. */
ret = chsc_determine_base_channel_path_desc(chpid, &chp->desc);
} else {
chp->cmg = -1;
}
+ dev_set_name(&chp->dev, "chp%x.%02x", chpid.cssid, chpid.id);
/* make it known to the system */
ret = device_register(&chp->dev);
unsigned long flags;
struct ccw_dev_id dev_id;
- cdev = sch_get_cdev(sch);
- if (cdev) {
+ if (cio_is_console(sch->schid)) {
rc = sysfs_create_group(&sch->dev.kobj,
&io_subchannel_attr_group);
if (rc)
"0.%x.%04x (rc=%d)\n",
sch->schid.ssid, sch->schid.sch_no, rc);
/*
- * This subchannel already has an associated ccw_device.
+ * The console subchannel already has an associated ccw_device.
* Throw the delayed uevent for the subchannel, register
- * the ccw_device and exit. This happens for all early
- * devices, e.g. the console.
+ * the ccw_device and exit.
*/
dev_set_uevent_suppress(&sch->dev, 0);
kobject_uevent(&sch->dev.kobj, KOBJ_ADD);
+ cdev = sch_get_cdev(sch);
cdev->dev.groups = ccwdev_attr_groups;
device_initialize(&cdev->dev);
ccw_device_register(cdev);
return 0;
}
-static void device_set_disconnected(struct ccw_device *cdev)
+void ccw_device_set_disconnected(struct ccw_device *cdev)
{
if (!cdev)
return;
ccw_device_trigger_reprobe(cdev);
break;
case DISC:
- device_set_disconnected(cdev);
+ ccw_device_set_disconnected(cdev);
break;
default:
break;
void ccw_device_trigger_reprobe(struct ccw_device *);
void ccw_device_kill_io(struct ccw_device *);
int ccw_device_notify(struct ccw_device *, int);
+void ccw_device_set_disconnected(struct ccw_device *cdev);
void ccw_device_set_notoper(struct ccw_device *cdev);
/* qdio needs this. */
cdev->private->state = state;
- if (state == DEV_STATE_BOXED) {
+ switch (state) {
+ case DEV_STATE_BOXED:
CIO_MSG_EVENT(0, "Boxed device %04x on subchannel %04x\n",
cdev->private->dev_id.devno, sch->schid.sch_no);
if (cdev->online && !ccw_device_notify(cdev, CIO_BOXED))
ccw_device_schedule_sch_unregister(cdev);
cdev->private->flags.donotify = 0;
- }
- if (state == DEV_STATE_NOT_OPER) {
+ break;
+ case DEV_STATE_NOT_OPER:
CIO_MSG_EVENT(0, "Device %04x gone on subchannel %04x\n",
cdev->private->dev_id.devno, sch->schid.sch_no);
if (!ccw_device_notify(cdev, CIO_GONE))
ccw_device_schedule_sch_unregister(cdev);
+ else
+ ccw_device_set_disconnected(cdev);
cdev->private->flags.donotify = 0;
+ break;
+ case DEV_STATE_DISCONNECTED:
+ CIO_MSG_EVENT(0, "Disconnected device %04x on subchannel "
+ "%04x\n", cdev->private->dev_id.devno,
+ sch->schid.sch_no);
+ if (!ccw_device_notify(cdev, CIO_NO_PATH))
+ ccw_device_schedule_sch_unregister(cdev);
+ else
+ ccw_device_set_disconnected(cdev);
+ cdev->private->flags.donotify = 0;
+ break;
+ default:
+ break;
}
if (cdev->private->flags.donotify) {
ccw_device_done(cdev, DEV_STATE_NOT_OPER);
return 0;
}
+ if (cdev->private->state == DEV_STATE_BOXED) {
+ ccw_device_done(cdev, DEV_STATE_BOXED);
+ return 0;
+ }
if (ccw_device_is_orphan(cdev)) {
ccw_device_done(cdev, DEV_STATE_OFFLINE);
return 0;
static void ccw_device_generic_notoper(struct ccw_device *cdev,
enum dev_event dev_event)
{
- struct subchannel *sch;
-
- ccw_device_set_notoper(cdev);
- sch = to_subchannel(cdev->dev.parent);
- css_schedule_eval(sch->schid);
+ if (!ccw_device_notify(cdev, CIO_GONE))
+ ccw_device_schedule_sch_unregister(cdev);
+ else
+ ccw_device_set_disconnected(cdev);
}
/*
filp->f_path.dentry->d_inode->i_private);
}
-static struct file_operations debugfs_fops = {
+static const struct file_operations debugfs_fops = {
.owner = THIS_MODULE,
.open = qstat_seq_open,
.read = seq_read,
return single_open(filp, qdio_perf_proc_show, NULL);
}
-static struct file_operations qdio_perf_proc_fops = {
+static const struct file_operations qdio_perf_proc_fops = {
.owner = THIS_MODULE,
.open = qdio_perf_seq_open,
.read = seq_read,
.ToCardLen1 = sizeof *msg - sizeof(msg->hdr),
.FromCardLen1 = sizeof *msg - sizeof(msg->hdr),
};
- static struct CPRBX static_cprbx = {
+ static struct CPRBX local_cprbx = {
.cprb_len = 0x00dc,
.cprb_ver_id = 0x02,
.func_id = {0x54, 0x32},
msg->hdr = static_type6_hdrX;
msg->hdr.FromCardLen2 = random_number_length,
- msg->cprbx = static_cprbx;
+ msg->cprbx = local_cprbx;
msg->cprbx.rpl_datal = random_number_length,
msg->cprbx.domain = AP_QID_QUEUE(ap_dev->qid);
memcpy(msg->function_code, msg->hdr.function_code, 0x02);
if (msg->cprbx.cprb_ver_id == 0x02)
return convert_type86_ica(zdev, reply,
outputdata, outputdatalength);
- /* no break, incorrect cprb version is an unknown response */
+ /* Fall through, no break, incorrect cprb version is an unknown
+ * response */
default: /* Unknown response type, this should NEVER EVER happen */
zdev->online = 0;
return -EAGAIN; /* repeat the request on a different device. */
}
if (msg->cprbx.cprb_ver_id == 0x02)
return convert_type86_xcrb(zdev, reply, xcRB);
- /* no break, incorrect cprb version is an unknown response */
+ /* Fall through, no break, incorrect cprb version is an unknown
+ * response */
default: /* Unknown response type, this should NEVER EVER happen */
xcRB->status = 0x0008044DL; /* HDD_InvalidParm */
zdev->online = 0;
return -EINVAL;
if (msg->cprbx.cprb_ver_id == 0x02)
return convert_type86_rng(zdev, reply, data);
- /* no break, incorrect cprb version is an unknown response */
+ /* Fall through, no break, incorrect cprb version is an unknown
+ * response */
default: /* Unknown response type, this should NEVER EVER happen */
zdev->online = 0;
return -EAGAIN; /* repeat the request on a different device. */
smsg_path->flags = 0;
rc = iucv_path_connect(smsg_path, &smsg_handler, "*MSG ",
NULL, NULL, NULL);
- printk(KERN_ERR "iucv_path_connect returned with rc %i\n", rc);
+#ifdef CONFIG_PM_DEBUG
+ if (rc)
+ printk(KERN_ERR
+ "iucv_path_connect returned with rc %i\n", rc);
+#endif
+ cpcmd("SET SMSG IUCV", NULL, 0, NULL);
}
return 0;
}
static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
{
+ struct ccw_device *ccwdev;
struct zfcp_adapter *adapter;
struct zfcp_port *port;
struct zfcp_unit *unit;
- mutex_lock(&zfcp_data.config_mutex);
- read_lock_irq(&zfcp_data.config_lock);
- adapter = zfcp_get_adapter_by_busid(busid);
- if (adapter)
- zfcp_adapter_get(adapter);
- read_unlock_irq(&zfcp_data.config_lock);
+ ccwdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
+ if (!ccwdev)
+ return;
+
+ if (ccw_device_set_online(ccwdev))
+ goto out_ccwdev;
+ mutex_lock(&zfcp_data.config_mutex);
+ adapter = dev_get_drvdata(&ccwdev->dev);
if (!adapter)
- goto out_adapter;
- port = zfcp_port_enqueue(adapter, wwpn, 0, 0);
- if (IS_ERR(port))
+ goto out_unlock;
+ zfcp_adapter_get(adapter);
+
+ port = zfcp_get_port_by_wwpn(adapter, wwpn);
+ if (!port)
goto out_port;
+
+ zfcp_port_get(port);
unit = zfcp_unit_enqueue(port, lun);
if (IS_ERR(unit))
goto out_unit;
mutex_unlock(&zfcp_data.config_mutex);
- ccw_device_set_online(adapter->ccw_device);
+ zfcp_erp_unit_reopen(unit, 0, "auidc_1", NULL);
zfcp_erp_wait(adapter);
flush_work(&unit->scsi_work);
zfcp_port_put(port);
out_port:
zfcp_adapter_put(adapter);
-out_adapter:
+out_unlock:
mutex_unlock(&zfcp_data.config_mutex);
+out_ccwdev:
+ put_device(&ccwdev->dev);
return;
}
static void __init zfcp_init_device_setup(char *devstr)
{
char *token;
- char *str;
+ char *str, *str_saved;
char busid[ZFCP_BUS_ID_SIZE];
u64 wwpn, lun;
/* duplicate devstr and keep the original for sysfs presentation*/
- str = kmalloc(strlen(devstr) + 1, GFP_KERNEL);
+ str_saved = kmalloc(strlen(devstr) + 1, GFP_KERNEL);
+ str = str_saved;
if (!str)
return;
if (!token || strict_strtoull(token, 0, (unsigned long long *) &lun))
goto err_out;
- kfree(str);
+ kfree(str_saved);
zfcp_init_device_configure(busid, wwpn, lun);
return;
- err_out:
- kfree(str);
+err_out:
+ kfree(str_saved);
pr_err("%s is not a valid SCSI device\n", devstr);
}
int retval = 0;
unsigned long flags;
- cancel_work_sync(&adapter->scan_work);
cancel_work_sync(&adapter->stat_work);
zfcp_fc_wka_ports_force_offline(adapter->gs);
- zfcp_adapter_scsi_unregister(adapter);
sysfs_remove_group(&adapter->ccw_device->dev.kobj,
&zfcp_sysfs_adapter_attrs);
dev_set_drvdata(&adapter->ccw_device->dev, NULL);
adapter = dev_get_drvdata(&ccw_device->dev);
if (!adapter)
goto out;
+ mutex_unlock(&zfcp_data.config_mutex);
+
+ cancel_work_sync(&adapter->scan_work);
+
+ mutex_lock(&zfcp_data.config_mutex);
+
+ /* this also removes the scsi devices, so call it first */
+ zfcp_adapter_scsi_unregister(adapter);
write_lock_irq(&zfcp_data.config_lock);
list_for_each_entry_safe(port, p, &adapter->port_list_head, list) {
write_unlock_irq(&zfcp_data.config_lock);
list_for_each_entry_safe(port, p, &port_remove_lh, list) {
- list_for_each_entry_safe(unit, u, &unit_remove_lh, list) {
- if (unit->device)
- scsi_remove_device(unit->device);
+ list_for_each_entry_safe(unit, u, &unit_remove_lh, list)
zfcp_unit_dequeue(unit);
- }
zfcp_port_dequeue(port);
}
wait_event(adapter->remove_wq, atomic_read(&adapter->refcount) == 0);
mutex_lock(&zfcp_data.config_mutex);
adapter = dev_get_drvdata(&ccw_device->dev);
- if (!adapter)
- goto out;
-
zfcp_erp_adapter_shutdown(adapter, 0, "ccsoff1", NULL);
zfcp_erp_wait(adapter);
mutex_unlock(&zfcp_data.config_mutex);
-out:
return 0;
}
mutex_lock(&zfcp_data.config_mutex);
adapter = dev_get_drvdata(&cdev->dev);
+ if (!adapter)
+ goto out;
+
zfcp_erp_adapter_shutdown(adapter, 0, "ccshut1", NULL);
zfcp_erp_wait(adapter);
zfcp_erp_thread_kill(adapter);
+out:
mutex_unlock(&zfcp_data.config_mutex);
}
-static struct ccw_driver zfcp_ccw_driver = {
+struct ccw_driver zfcp_ccw_driver = {
.owner = THIS_MODULE,
.name = "zfcp",
.ids = zfcp_ccw_device_id,
{
return ccw_driver_register(&zfcp_ccw_driver);
}
-
-/**
- * zfcp_get_adapter_by_busid - find zfcp_adapter struct
- * @busid: bus id string of zfcp adapter to find
- */
-struct zfcp_adapter *zfcp_get_adapter_by_busid(char *busid)
-{
- struct ccw_device *ccw_device;
- struct zfcp_adapter *adapter = NULL;
-
- ccw_device = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
- if (ccw_device) {
- adapter = dev_get_drvdata(&ccw_device->dev);
- put_device(&ccw_device->dev);
- }
- return adapter;
-}
static struct zfcp_adapter *zfcp_cfdc_get_adapter(u32 devno)
{
char busid[9];
+ struct ccw_device *ccwdev;
+ struct zfcp_adapter *adapter = NULL;
+
snprintf(busid, sizeof(busid), "0.0.%04x", devno);
- return zfcp_get_adapter_by_busid(busid);
+ ccwdev = get_ccwdev_by_busid(&zfcp_ccw_driver, busid);
+ if (!ccwdev)
+ goto out;
+
+ adapter = dev_get_drvdata(&ccwdev->dev);
+ if (!adapter)
+ goto out_put;
+
+ zfcp_adapter_get(adapter);
+out_put:
+ put_device(&ccwdev->dev);
+out:
+ return adapter;
}
static int zfcp_cfdc_set_fsf(struct zfcp_fsf_cfdc *fsf_cfdc, int command)
if (fc_host_port_type(adapter->scsi_host) == FC_PORTTYPE_PTP)
return zfcp_erp_open_ptp_port(act);
if (!port->d_id) {
- zfcp_port_get(port);
- if (!queue_work(adapter->work_queue,
- &port->gid_pn_work))
- zfcp_port_put(port);
+ zfcp_fc_trigger_did_lookup(port);
return ZFCP_ERP_EXIT;
}
return zfcp_erp_port_strategy_open_port(act);
case ZFCP_ERP_STEP_PORT_OPENING:
/* D_ID might have changed during open */
if (p_status & ZFCP_STATUS_COMMON_OPEN) {
- if (port->d_id)
- return ZFCP_ERP_SUCCEEDED;
- else {
- act->step = ZFCP_ERP_STEP_PORT_CLOSING;
- return ZFCP_ERP_CONTINUES;
+ if (!port->d_id) {
+ zfcp_fc_trigger_did_lookup(port);
+ return ZFCP_ERP_EXIT;
}
+ return ZFCP_ERP_SUCCEEDED;
}
if (port->d_id && !(p_status & ZFCP_STATUS_COMMON_NOESC)) {
port->d_id = 0;
static int zfcp_erp_port_strategy(struct zfcp_erp_action *erp_action)
{
struct zfcp_port *port = erp_action->port;
+ int p_status = atomic_read(&port->status);
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC)
+ if ((p_status & ZFCP_STATUS_COMMON_NOESC) &&
+ !(p_status & ZFCP_STATUS_COMMON_OPEN))
goto close_init_done;
switch (erp_action->step) {
case ZFCP_ERP_STEP_UNINITIALIZED:
zfcp_erp_port_strategy_clearstati(port);
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)
+ if (p_status & ZFCP_STATUS_COMMON_OPEN)
return zfcp_erp_port_strategy_close(erp_action);
break;
case ZFCP_ERP_STEP_PORT_CLOSING:
- if (atomic_read(&port->status) & ZFCP_STATUS_COMMON_OPEN)
+ if (p_status & ZFCP_STATUS_COMMON_OPEN)
return ZFCP_ERP_FAILED;
break;
}
/* zfcp_ccw.c */
extern int zfcp_ccw_register(void);
extern int zfcp_ccw_priv_sch(struct zfcp_adapter *);
-extern struct zfcp_adapter *zfcp_get_adapter_by_busid(char *);
+extern struct ccw_driver zfcp_ccw_driver;
/* zfcp_cfdc.c */
extern struct miscdevice zfcp_cfdc_misc;
extern void _zfcp_fc_scan_ports_later(struct work_struct *);
extern void zfcp_fc_incoming_els(struct zfcp_fsf_req *);
extern void zfcp_fc_port_did_lookup(struct work_struct *);
+extern void zfcp_fc_trigger_did_lookup(struct zfcp_port *);
extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *);
extern void zfcp_fc_test_link(struct zfcp_port *);
extern void zfcp_fc_link_test_work(struct work_struct *);
zfcp_port_put(port);
}
+/**
+ * zfcp_fc_trigger_did_lookup - trigger the d_id lookup using a GID_PN request
+ * @port: The zfcp_port to lookup the d_id for.
+ */
+void zfcp_fc_trigger_did_lookup(struct zfcp_port *port)
+{
+ zfcp_port_get(port);
+ if (!queue_work(port->adapter->work_queue, &port->gid_pn_work))
+ zfcp_port_put(port);
+}
+
/**
* zfcp_fc_plogi_evaluate - evaluate PLOGI playload
* @port: zfcp_port structure
bytes = zfcp_qdio_sbals_from_sg(adapter->qdio, &req->queue_req,
SBAL_FLAGS0_TYPE_WRITE_READ,
sg_resp, max_sbals);
+ req->qtcb->bottom.support.resp_buf_length = bytes;
if (bytes <= 0)
return -EIO;
+ return 0;
+}
+
+static int zfcp_fsf_setup_ct_els(struct zfcp_fsf_req *req,
+ struct scatterlist *sg_req,
+ struct scatterlist *sg_resp,
+ int max_sbals)
+{
+ int ret;
+
+ ret = zfcp_fsf_setup_ct_els_sbals(req, sg_req, sg_resp, max_sbals);
+ if (ret)
+ return ret;
+
/* common settings for ct/gs and els requests */
- req->qtcb->bottom.support.resp_buf_length = bytes;
req->qtcb->bottom.support.service_class = FSF_CLASS_3;
req->qtcb->bottom.support.timeout = 2 * R_A_TOV;
- zfcp_fsf_start_timer(req, 2 * R_A_TOV + 10);
+ zfcp_fsf_start_timer(req, (2 * R_A_TOV + 10) * HZ);
return 0;
}
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- ret = zfcp_fsf_setup_ct_els_sbals(req, ct->req, ct->resp,
- FSF_MAX_SBALS_PER_REQ);
+ ret = zfcp_fsf_setup_ct_els(req, ct->req, ct->resp,
+ FSF_MAX_SBALS_PER_REQ);
if (ret)
goto failed_send;
}
req->status |= ZFCP_STATUS_FSFREQ_CLEANUP;
- ret = zfcp_fsf_setup_ct_els_sbals(req, els->req, els->resp, 2);
+ ret = zfcp_fsf_setup_ct_els(req, els->req, els->resp, 2);
if (ret)
goto failed_send;
plogi = (struct fsf_plogi *) req->qtcb->bottom.support.els;
if (req->qtcb->bottom.support.els1_length >=
FSF_PLOGI_MIN_LEN) {
- if (plogi->serv_param.wwpn != port->wwpn)
+ if (plogi->serv_param.wwpn != port->wwpn) {
port->d_id = 0;
- else {
+ dev_warn(&port->adapter->ccw_device->dev,
+ "A port opened with WWPN 0x%016Lx "
+ "returned data that identifies it as "
+ "WWPN 0x%016Lx\n",
+ (unsigned long long) port->wwpn,
+ (unsigned long long)
+ plogi->serv_param.wwpn);
+ } else {
port->wwnn = plogi->serv_param.wwnn;
zfcp_fc_plogi_evaluate(port, plogi);
}
zfcp_erp_unit_reopen(unit, 0, "syuas_1", NULL);
zfcp_erp_wait(unit->port->adapter);
+ flush_work(&unit->scsi_work);
zfcp_unit_put(unit);
out:
mutex_unlock(&zfcp_data.config_mutex);
source "drivers/scsi/cxgb3i/Kconfig"
source "drivers/scsi/bnx2i/Kconfig"
+source "drivers/scsi/be2iscsi/Kconfig"
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
To compile this driver as a module, choose M here: the
module will be called libsrp.
+config SCSI_BFA_FC
+ tristate "Brocade BFA Fibre Channel Support"
+ depends on PCI && SCSI
+ select SCSI_FC_ATTRS
+ help
+ This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
+
+ To compile this driver as a module, choose M here. The module will
+ be called bfa.
+
endif # SCSI_LOWLEVEL
source "drivers/scsi/pcmcia/Kconfig"
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
obj-$(CONFIG_SCSI_QLA_ISCSI) += qla4xxx/
obj-$(CONFIG_SCSI_LPFC) += lpfc/
+obj-$(CONFIG_SCSI_BFA_FC) += bfa/
obj-$(CONFIG_SCSI_PAS16) += pas16.o
obj-$(CONFIG_SCSI_T128) += t128.o
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
obj-$(CONFIG_PS3_ROM) += ps3rom.o
obj-$(CONFIG_SCSI_CXGB3_ISCSI) += libiscsi.o libiscsi_tcp.o cxgb3i/
obj-$(CONFIG_SCSI_BNX2_ISCSI) += libiscsi.o bnx2i/
+obj-$(CONFIG_BE2ISCSI) += libiscsi.o be2iscsi/
obj-$(CONFIG_SCSI_PMCRAID) += pmcraid.o
obj-$(CONFIG_ARM) += arm/
--- /dev/null
+config BE2ISCSI
+ tristate "ServerEngines' 10Gbps iSCSI - BladeEngine 2"
+ depends on PCI && SCSI
+ select SCSI_ISCSI_ATTRS
+
+ help
+ This driver implements the iSCSI functionality for ServerEngines'
+ 10Gbps Storage adapter - BladeEngine 2.
--- /dev/null
+#
+# Makefile to build the iSCSI driver for ServerEngine's BladeEngine.
+#
+#
+
+obj-$(CONFIG_BE2ISCSI) += be2iscsi.o
+
+be2iscsi-y := be_iscsi.o be_main.o be_mgmt.o be_cmds.o
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#ifndef BEISCSI_H
+#define BEISCSI_H
+
+#include <linux/pci.h>
+#include <linux/if_vlan.h>
+
+#define FW_VER_LEN 32
+
+struct be_dma_mem {
+ void *va;
+ dma_addr_t dma;
+ u32 size;
+};
+
+struct be_queue_info {
+ struct be_dma_mem dma_mem;
+ u16 len;
+ u16 entry_size; /* Size of an element in the queue */
+ u16 id;
+ u16 tail, head;
+ bool created;
+ atomic_t used; /* Number of valid elements in the queue */
+};
+
+static inline u32 MODULO(u16 val, u16 limit)
+{
+ WARN_ON(limit & (limit - 1));
+ return val & (limit - 1);
+}
+
+static inline void index_inc(u16 *index, u16 limit)
+{
+ *index = MODULO((*index + 1), limit);
+}
+
+static inline void *queue_head_node(struct be_queue_info *q)
+{
+ return q->dma_mem.va + q->head * q->entry_size;
+}
+
+static inline void *queue_tail_node(struct be_queue_info *q)
+{
+ return q->dma_mem.va + q->tail * q->entry_size;
+}
+
+static inline void queue_head_inc(struct be_queue_info *q)
+{
+ index_inc(&q->head, q->len);
+}
+
+static inline void queue_tail_inc(struct be_queue_info *q)
+{
+ index_inc(&q->tail, q->len);
+}
+
+/*ISCSI */
+
+struct be_eq_obj {
+ struct be_queue_info q;
+ char desc[32];
+
+ /* Adaptive interrupt coalescing (AIC) info */
+ bool enable_aic;
+ u16 min_eqd; /* in usecs */
+ u16 max_eqd; /* in usecs */
+ u16 cur_eqd; /* in usecs */
+};
+
+struct be_mcc_obj {
+ struct be_queue_info *q;
+ struct be_queue_info *cq;
+};
+
+struct be_ctrl_info {
+ u8 __iomem *csr;
+ u8 __iomem *db; /* Door Bell */
+ u8 __iomem *pcicfg; /* PCI config space */
+ struct pci_dev *pdev;
+
+ /* Mbox used for cmd request/response */
+ spinlock_t mbox_lock; /* For serializing mbox cmds to BE card */
+ struct be_dma_mem mbox_mem;
+ /* Mbox mem is adjusted to align to 16 bytes. The allocated addr
+ * is stored for freeing purpose */
+ struct be_dma_mem mbox_mem_alloced;
+
+ /* MCC Rings */
+ struct be_mcc_obj mcc_obj;
+ spinlock_t mcc_lock; /* For serializing mcc cmds to BE card */
+ spinlock_t mcc_cq_lock;
+
+ /* MCC Async callback */
+ void (*async_cb) (void *adapter, bool link_up);
+ void *adapter_ctxt;
+};
+
+#include "be_cmds.h"
+
+#define PAGE_SHIFT_4K 12
+#define PAGE_SIZE_4K (1 << PAGE_SHIFT_4K)
+
+/* Returns number of pages spanned by the data starting at the given addr */
+#define PAGES_4K_SPANNED(_address, size) \
+ ((u32)((((size_t)(_address) & (PAGE_SIZE_4K - 1)) + \
+ (size) + (PAGE_SIZE_4K - 1)) >> PAGE_SHIFT_4K))
+
+/* Byte offset into the page corresponding to given address */
+#define OFFSET_IN_PAGE(addr) \
+ ((size_t)(addr) & (PAGE_SIZE_4K-1))
+
+/* Returns bit offset within a DWORD of a bitfield */
+#define AMAP_BIT_OFFSET(_struct, field) \
+ (((size_t)&(((_struct *)0)->field))%32)
+
+/* Returns the bit mask of the field that is NOT shifted into location. */
+static inline u32 amap_mask(u32 bitsize)
+{
+ return (bitsize == 32 ? 0xFFFFFFFF : (1 << bitsize) - 1);
+}
+
+static inline void amap_set(void *ptr, u32 dw_offset, u32 mask,
+ u32 offset, u32 value)
+{
+ u32 *dw = (u32 *) ptr + dw_offset;
+ *dw &= ~(mask << offset);
+ *dw |= (mask & value) << offset;
+}
+
+#define AMAP_SET_BITS(_struct, field, ptr, val) \
+ amap_set(ptr, \
+ offsetof(_struct, field)/32, \
+ amap_mask(sizeof(((_struct *)0)->field)), \
+ AMAP_BIT_OFFSET(_struct, field), \
+ val)
+
+static inline u32 amap_get(void *ptr, u32 dw_offset, u32 mask, u32 offset)
+{
+ u32 *dw = ptr;
+ return mask & (*(dw + dw_offset) >> offset);
+}
+
+#define AMAP_GET_BITS(_struct, field, ptr) \
+ amap_get(ptr, \
+ offsetof(_struct, field)/32, \
+ amap_mask(sizeof(((_struct *)0)->field)), \
+ AMAP_BIT_OFFSET(_struct, field))
+
+#define be_dws_cpu_to_le(wrb, len) swap_dws(wrb, len)
+#define be_dws_le_to_cpu(wrb, len) swap_dws(wrb, len)
+static inline void swap_dws(void *wrb, int len)
+{
+#ifdef __BIG_ENDIAN
+ u32 *dw = wrb;
+ WARN_ON(len % 4);
+ do {
+ *dw = cpu_to_le32(*dw);
+ dw++;
+ len -= 4;
+ } while (len);
+#endif /* __BIG_ENDIAN */
+}
+
+extern void beiscsi_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+ u16 num_popped);
+
+#endif /* BEISCSI_H */
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#include "be.h"
+#include "be_mgmt.h"
+#include "be_main.h"
+
+static inline bool be_mcc_compl_is_new(struct be_mcc_compl *compl)
+{
+ if (compl->flags != 0) {
+ compl->flags = le32_to_cpu(compl->flags);
+ WARN_ON((compl->flags & CQE_FLAGS_VALID_MASK) == 0);
+ return true;
+ } else
+ return false;
+}
+
+static inline void be_mcc_compl_use(struct be_mcc_compl *compl)
+{
+ compl->flags = 0;
+}
+
+static int be_mcc_compl_process(struct be_ctrl_info *ctrl,
+ struct be_mcc_compl *compl)
+{
+ u16 compl_status, extd_status;
+
+ be_dws_le_to_cpu(compl, 4);
+
+ compl_status = (compl->status >> CQE_STATUS_COMPL_SHIFT) &
+ CQE_STATUS_COMPL_MASK;
+ if (compl_status != MCC_STATUS_SUCCESS) {
+ extd_status = (compl->status >> CQE_STATUS_EXTD_SHIFT) &
+ CQE_STATUS_EXTD_MASK;
+ dev_err(&ctrl->pdev->dev,
+ "error in cmd completion: status(compl/extd)=%d/%d\n",
+ compl_status, extd_status);
+ return -1;
+ }
+ return 0;
+}
+
+static inline bool is_link_state_evt(u32 trailer)
+{
+ return (((trailer >> ASYNC_TRAILER_EVENT_CODE_SHIFT) &
+ ASYNC_TRAILER_EVENT_CODE_MASK) == ASYNC_EVENT_CODE_LINK_STATE);
+}
+
+void beiscsi_cq_notify(struct be_ctrl_info *ctrl, u16 qid, bool arm,
+ u16 num_popped)
+{
+ u32 val = 0;
+ val |= qid & DB_CQ_RING_ID_MASK;
+ if (arm)
+ val |= 1 << DB_CQ_REARM_SHIFT;
+ val |= num_popped << DB_CQ_NUM_POPPED_SHIFT;
+ iowrite32(val, ctrl->db + DB_CQ_OFFSET);
+}
+
+static int be_mbox_db_ready_wait(struct be_ctrl_info *ctrl)
+{
+#define long_delay 2000
+ void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
+ int cnt = 0, wait = 5; /* in usecs */
+ u32 ready;
+
+ do {
+ ready = ioread32(db) & MPU_MAILBOX_DB_RDY_MASK;
+ if (ready)
+ break;
+
+ if (cnt > 6000000) {
+ dev_err(&ctrl->pdev->dev, "mbox_db poll timed out\n");
+ return -1;
+ }
+
+ if (cnt > 50) {
+ wait = long_delay;
+ mdelay(long_delay / 1000);
+ } else
+ udelay(wait);
+ cnt += wait;
+ } while (true);
+ return 0;
+}
+
+int be_mbox_notify(struct be_ctrl_info *ctrl)
+{
+ int status;
+ u32 val = 0;
+ void __iomem *db = ctrl->db + MPU_MAILBOX_DB_OFFSET;
+ struct be_dma_mem *mbox_mem = &ctrl->mbox_mem;
+ struct be_mcc_mailbox *mbox = mbox_mem->va;
+ struct be_mcc_compl *compl = &mbox->compl;
+
+ val &= ~MPU_MAILBOX_DB_RDY_MASK;
+ val |= MPU_MAILBOX_DB_HI_MASK;
+ val |= (upper_32_bits(mbox_mem->dma) >> 2) << 2;
+ iowrite32(val, db);
+
+ status = be_mbox_db_ready_wait(ctrl);
+ if (status != 0) {
+ SE_DEBUG(DBG_LVL_1, " be_mbox_db_ready_wait failed 1\n");
+ return status;
+ }
+ val = 0;
+ val &= ~MPU_MAILBOX_DB_RDY_MASK;
+ val &= ~MPU_MAILBOX_DB_HI_MASK;
+ val |= (u32) (mbox_mem->dma >> 4) << 2;
+ iowrite32(val, db);
+
+ status = be_mbox_db_ready_wait(ctrl);
+ if (status != 0) {
+ SE_DEBUG(DBG_LVL_1, " be_mbox_db_ready_wait failed 2\n");
+ return status;
+ }
+ if (be_mcc_compl_is_new(compl)) {
+ status = be_mcc_compl_process(ctrl, &mbox->compl);
+ be_mcc_compl_use(compl);
+ if (status) {
+ SE_DEBUG(DBG_LVL_1, "After be_mcc_compl_process \n");
+ return status;
+ }
+ } else {
+ dev_err(&ctrl->pdev->dev, "invalid mailbox completion\n");
+ return -1;
+ }
+ return 0;
+}
+
+void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
+ bool embedded, u8 sge_cnt)
+{
+ if (embedded)
+ wrb->embedded |= MCC_WRB_EMBEDDED_MASK;
+ else
+ wrb->embedded |= (sge_cnt & MCC_WRB_SGE_CNT_MASK) <<
+ MCC_WRB_SGE_CNT_SHIFT;
+ wrb->payload_length = payload_len;
+ be_dws_cpu_to_le(wrb, 8);
+}
+
+void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
+ u8 subsystem, u8 opcode, int cmd_len)
+{
+ req_hdr->opcode = opcode;
+ req_hdr->subsystem = subsystem;
+ req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+}
+
+static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
+ struct be_dma_mem *mem)
+{
+ int i, buf_pages;
+ u64 dma = (u64) mem->dma;
+
+ buf_pages = min(PAGES_4K_SPANNED(mem->va, mem->size), max_pages);
+ for (i = 0; i < buf_pages; i++) {
+ pages[i].lo = cpu_to_le32(dma & 0xFFFFFFFF);
+ pages[i].hi = cpu_to_le32(upper_32_bits(dma));
+ dma += PAGE_SIZE_4K;
+ }
+}
+
+static u32 eq_delay_to_mult(u32 usec_delay)
+{
+#define MAX_INTR_RATE 651042
+ const u32 round = 10;
+ u32 multiplier;
+
+ if (usec_delay == 0)
+ multiplier = 0;
+ else {
+ u32 interrupt_rate = 1000000 / usec_delay;
+ if (interrupt_rate == 0)
+ multiplier = 1023;
+ else {
+ multiplier = (MAX_INTR_RATE - interrupt_rate) * round;
+ multiplier /= interrupt_rate;
+ multiplier = (multiplier + round / 2) / round;
+ multiplier = min(multiplier, (u32) 1023);
+ }
+ }
+ return multiplier;
+}
+
+struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem)
+{
+ return &((struct be_mcc_mailbox *)(mbox_mem->va))->wrb;
+}
+
+int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *eq, int eq_delay)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_eq_create *req = embedded_payload(wrb);
+ struct be_cmd_resp_eq_create *resp = embedded_payload(wrb);
+ struct be_dma_mem *q_mem = &eq->dma_mem;
+ int status;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_EQ_CREATE, sizeof(*req));
+
+ req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+
+ AMAP_SET_BITS(struct amap_eq_context, func, req->context,
+ PCI_FUNC(ctrl->pdev->devfn));
+ AMAP_SET_BITS(struct amap_eq_context, valid, req->context, 1);
+ AMAP_SET_BITS(struct amap_eq_context, size, req->context, 0);
+ AMAP_SET_BITS(struct amap_eq_context, count, req->context,
+ __ilog2_u32(eq->len / 256));
+ AMAP_SET_BITS(struct amap_eq_context, delaymult, req->context,
+ eq_delay_to_mult(eq_delay));
+ be_dws_cpu_to_le(req->context, sizeof(req->context));
+
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_notify(ctrl);
+ if (!status) {
+ eq->id = le16_to_cpu(resp->eq_id);
+ eq->created = true;
+ }
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+int be_cmd_fw_initialize(struct be_ctrl_info *ctrl)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ int status;
+ u8 *endian_check;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ endian_check = (u8 *) wrb;
+ *endian_check++ = 0xFF;
+ *endian_check++ = 0x12;
+ *endian_check++ = 0x34;
+ *endian_check++ = 0xFF;
+ *endian_check++ = 0xFF;
+ *endian_check++ = 0x56;
+ *endian_check++ = 0x78;
+ *endian_check++ = 0xFF;
+ be_dws_cpu_to_le(wrb, sizeof(*wrb));
+
+ status = be_mbox_notify(ctrl);
+ if (status)
+ SE_DEBUG(DBG_LVL_1, "be_cmd_fw_initialize Failed \n");
+
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *cq, struct be_queue_info *eq,
+ bool sol_evts, bool no_delay, int coalesce_wm)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_cq_create *req = embedded_payload(wrb);
+ struct be_cmd_resp_cq_create *resp = embedded_payload(wrb);
+ struct be_dma_mem *q_mem = &cq->dma_mem;
+ void *ctxt = &req->context;
+ int status;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_CQ_CREATE, sizeof(*req));
+
+ if (!q_mem->va)
+ SE_DEBUG(DBG_LVL_1, "uninitialized q_mem->va\n");
+
+ req->num_pages = cpu_to_le16(PAGES_4K_SPANNED(q_mem->va, q_mem->size));
+
+ AMAP_SET_BITS(struct amap_cq_context, coalescwm, ctxt, coalesce_wm);
+ AMAP_SET_BITS(struct amap_cq_context, nodelay, ctxt, no_delay);
+ AMAP_SET_BITS(struct amap_cq_context, count, ctxt,
+ __ilog2_u32(cq->len / 256));
+ AMAP_SET_BITS(struct amap_cq_context, valid, ctxt, 1);
+ AMAP_SET_BITS(struct amap_cq_context, solevent, ctxt, sol_evts);
+ AMAP_SET_BITS(struct amap_cq_context, eventable, ctxt, 1);
+ AMAP_SET_BITS(struct amap_cq_context, eqid, ctxt, eq->id);
+ AMAP_SET_BITS(struct amap_cq_context, armed, ctxt, 1);
+ AMAP_SET_BITS(struct amap_cq_context, func, ctxt,
+ PCI_FUNC(ctrl->pdev->devfn));
+ be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_notify(ctrl);
+ if (!status) {
+ cq->id = le16_to_cpu(resp->cq_id);
+ cq->created = true;
+ } else
+ SE_DEBUG(DBG_LVL_1, "In be_cmd_cq_create, status=ox%08x \n",
+ status);
+ spin_unlock(&ctrl->mbox_lock);
+
+ return status;
+}
+
+static u32 be_encoded_q_len(int q_len)
+{
+ u32 len_encoded = fls(q_len); /* log2(len) + 1 */
+ if (len_encoded == 16)
+ len_encoded = 0;
+ return len_encoded;
+}
+int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+ int queue_type)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_q_destroy *req = embedded_payload(wrb);
+ u8 subsys = 0, opcode = 0;
+ int status;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ switch (queue_type) {
+ case QTYPE_EQ:
+ subsys = CMD_SUBSYSTEM_COMMON;
+ opcode = OPCODE_COMMON_EQ_DESTROY;
+ break;
+ case QTYPE_CQ:
+ subsys = CMD_SUBSYSTEM_COMMON;
+ opcode = OPCODE_COMMON_CQ_DESTROY;
+ break;
+ case QTYPE_WRBQ:
+ subsys = CMD_SUBSYSTEM_ISCSI;
+ opcode = OPCODE_COMMON_ISCSI_WRBQ_DESTROY;
+ break;
+ case QTYPE_DPDUQ:
+ subsys = CMD_SUBSYSTEM_ISCSI;
+ opcode = OPCODE_COMMON_ISCSI_DEFQ_DESTROY;
+ break;
+ case QTYPE_SGL:
+ subsys = CMD_SUBSYSTEM_ISCSI;
+ opcode = OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES;
+ break;
+ default:
+ spin_unlock(&ctrl->mbox_lock);
+ BUG();
+ return -1;
+ }
+ be_cmd_hdr_prepare(&req->hdr, subsys, opcode, sizeof(*req));
+ if (queue_type != QTYPE_SGL)
+ req->id = cpu_to_le16(q->id);
+
+ status = be_mbox_notify(ctrl);
+
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+int be_cmd_get_mac_addr(struct be_ctrl_info *ctrl, u8 *mac_addr)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_cmd_req_get_mac_addr *req = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG,
+ sizeof(*req));
+
+ status = be_mbox_notify(ctrl);
+ if (!status) {
+ struct be_cmd_resp_get_mac_addr *resp = embedded_payload(wrb);
+
+ memcpy(mac_addr, resp->mac_address, ETH_ALEN);
+ }
+
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+int be_cmd_create_default_pdu_queue(struct be_ctrl_info *ctrl,
+ struct be_queue_info *cq,
+ struct be_queue_info *dq, int length,
+ int entry_size)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_defq_create_req *req = embedded_payload(wrb);
+ struct be_dma_mem *q_mem = &dq->dma_mem;
+ void *ctxt = &req->context;
+ int status;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_DEFQ_CREATE, sizeof(*req));
+
+ req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+ AMAP_SET_BITS(struct amap_be_default_pdu_context, rx_pdid, ctxt, 0);
+ AMAP_SET_BITS(struct amap_be_default_pdu_context, rx_pdid_valid, ctxt,
+ 1);
+ AMAP_SET_BITS(struct amap_be_default_pdu_context, pci_func_id, ctxt,
+ PCI_FUNC(ctrl->pdev->devfn));
+ AMAP_SET_BITS(struct amap_be_default_pdu_context, ring_size, ctxt,
+ be_encoded_q_len(length / sizeof(struct phys_addr)));
+ AMAP_SET_BITS(struct amap_be_default_pdu_context, default_buffer_size,
+ ctxt, entry_size);
+ AMAP_SET_BITS(struct amap_be_default_pdu_context, cq_id_recv, ctxt,
+ cq->id);
+
+ be_dws_cpu_to_le(ctxt, sizeof(req->context));
+
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_notify(ctrl);
+ if (!status) {
+ struct be_defq_create_resp *resp = embedded_payload(wrb);
+
+ dq->id = le16_to_cpu(resp->id);
+ dq->created = true;
+ }
+ spin_unlock(&ctrl->mbox_lock);
+
+ return status;
+}
+
+int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
+ struct be_queue_info *wrbq)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_wrbq_create_req *req = embedded_payload(wrb);
+ struct be_wrbq_create_resp *resp = embedded_payload(wrb);
+ int status;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_WRBQ_CREATE, sizeof(*req));
+ req->num_pages = PAGES_4K_SPANNED(q_mem->va, q_mem->size);
+ be_cmd_page_addrs_prepare(req->pages, ARRAY_SIZE(req->pages), q_mem);
+
+ status = be_mbox_notify(ctrl);
+ if (!status)
+ wrbq->id = le16_to_cpu(resp->cid);
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl,
+ struct be_dma_mem *q_mem,
+ u32 page_offset, u32 num_pages)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_post_sgl_pages_req *req = embedded_payload(wrb);
+ int status;
+ unsigned int curr_pages;
+ u32 internal_page_offset = 0;
+ u32 temp_num_pages = num_pages;
+
+ if (num_pages == 0xff)
+ num_pages = 1;
+
+ spin_lock(&ctrl->mbox_lock);
+ do {
+ memset(wrb, 0, sizeof(*wrb));
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES,
+ sizeof(*req));
+ curr_pages = BE_NUMBER_OF_FIELD(struct be_post_sgl_pages_req,
+ pages);
+ req->num_pages = min(num_pages, curr_pages);
+ req->page_offset = page_offset;
+ be_cmd_page_addrs_prepare(req->pages, req->num_pages, q_mem);
+ q_mem->dma = q_mem->dma + (req->num_pages * PAGE_SIZE);
+ internal_page_offset += req->num_pages;
+ page_offset += req->num_pages;
+ num_pages -= req->num_pages;
+
+ if (temp_num_pages == 0xff)
+ req->num_pages = temp_num_pages;
+
+ status = be_mbox_notify(ctrl);
+ if (status) {
+ SE_DEBUG(DBG_LVL_1,
+ "FW CMD to map iscsi frags failed.\n");
+ goto error;
+ }
+ } while (num_pages > 0);
+error:
+ spin_unlock(&ctrl->mbox_lock);
+ if (status != 0)
+ beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL);
+ return status;
+}
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ */
+
+#ifndef BEISCSI_CMDS_H
+#define BEISCSI_CMDS_H
+
+/**
+ * The driver sends configuration and managements command requests to the
+ * firmware in the BE. These requests are communicated to the processor
+ * using Work Request Blocks (WRBs) submitted to the MCC-WRB ring or via one
+ * WRB inside a MAILBOX.
+ * The commands are serviced by the ARM processor in the BladeEngine's MPU.
+ */
+struct be_sge {
+ u32 pa_lo;
+ u32 pa_hi;
+ u32 len;
+};
+
+#define MCC_WRB_SGE_CNT_SHIFT 3 /* bits 3 - 7 of dword 0 */
+#define MCC_WRB_SGE_CNT_MASK 0x1F /* bits 3 - 7 of dword 0 */
+struct be_mcc_wrb {
+ u32 embedded; /* dword 0 */
+ u32 payload_length; /* dword 1 */
+ u32 tag0; /* dword 2 */
+ u32 tag1; /* dword 3 */
+ u32 rsvd; /* dword 4 */
+ union {
+ u8 embedded_payload[236]; /* used by embedded cmds */
+ struct be_sge sgl[19]; /* used by non-embedded cmds */
+ } payload;
+};
+
+#define CQE_FLAGS_VALID_MASK (1 << 31)
+#define CQE_FLAGS_ASYNC_MASK (1 << 30)
+
+/* Completion Status */
+#define MCC_STATUS_SUCCESS 0x0
+
+#define CQE_STATUS_COMPL_MASK 0xFFFF
+#define CQE_STATUS_COMPL_SHIFT 0 /* bits 0 - 15 */
+#define CQE_STATUS_EXTD_MASK 0xFFFF
+#define CQE_STATUS_EXTD_SHIFT 0 /* bits 0 - 15 */
+
+struct be_mcc_compl {
+ u32 status; /* dword 0 */
+ u32 tag0; /* dword 1 */
+ u32 tag1; /* dword 2 */
+ u32 flags; /* dword 3 */
+};
+
+/********* Mailbox door bell *************/
+/**
+ * Used for driver communication with the FW.
+ * The software must write this register twice to post any command. First,
+ * it writes the register with hi=1 and the upper bits of the physical address
+ * for the MAILBOX structure. Software must poll the ready bit until this
+ * is acknowledged. Then, sotware writes the register with hi=0 with the lower
+ * bits in the address. It must poll the ready bit until the command is
+ * complete. Upon completion, the MAILBOX will contain a valid completion
+ * queue entry.
+ */
+#define MPU_MAILBOX_DB_OFFSET 0x160
+#define MPU_MAILBOX_DB_RDY_MASK 0x1 /* bit 0 */
+#define MPU_MAILBOX_DB_HI_MASK 0x2 /* bit 1 */
+
+/********** MPU semphore ******************/
+#define MPU_EP_SEMAPHORE_OFFSET 0xac
+#define EP_SEMAPHORE_POST_STAGE_MASK 0x0000FFFF
+#define EP_SEMAPHORE_POST_ERR_MASK 0x1
+#define EP_SEMAPHORE_POST_ERR_SHIFT 31
+
+/********** MCC door bell ************/
+#define DB_MCCQ_OFFSET 0x140
+#define DB_MCCQ_RING_ID_MASK 0x7FF /* bits 0 - 10 */
+/* Number of entries posted */
+#define DB_MCCQ_NUM_POSTED_SHIFT 16 /* bits 16 - 29 */
+
+/* MPU semphore POST stage values */
+#define POST_STAGE_ARMFW_RDY 0xc000 /* FW is done with POST */
+
+/**
+ * When the async bit of mcc_compl is set, the last 4 bytes of
+ * mcc_compl is interpreted as follows:
+ */
+#define ASYNC_TRAILER_EVENT_CODE_SHIFT 8 /* bits 8 - 15 */
+#define ASYNC_TRAILER_EVENT_CODE_MASK 0xFF
+#define ASYNC_EVENT_CODE_LINK_STATE 0x1
+struct be_async_event_trailer {
+ u32 code;
+};
+
+enum {
+ ASYNC_EVENT_LINK_DOWN = 0x0,
+ ASYNC_EVENT_LINK_UP = 0x1
+};
+
+/**
+ * When the event code of an async trailer is link-state, the mcc_compl
+ * must be interpreted as follows
+ */
+struct be_async_event_link_state {
+ u8 physical_port;
+ u8 port_link_status;
+ u8 port_duplex;
+ u8 port_speed;
+ u8 port_fault;
+ u8 rsvd0[7];
+ struct be_async_event_trailer trailer;
+} __packed;
+
+struct be_mcc_mailbox {
+ struct be_mcc_wrb wrb;
+ struct be_mcc_compl compl;
+};
+
+/* Type of subsystems supported by FW */
+#define CMD_SUBSYSTEM_COMMON 0x1
+#define CMD_SUBSYSTEM_ISCSI 0x2
+#define CMD_SUBSYSTEM_ETH 0x3
+#define CMD_SUBSYSTEM_ISCSI_INI 0x6
+#define CMD_COMMON_TCP_UPLOAD 0x1
+
+/**
+ * List of common opcodes subsystem CMD_SUBSYSTEM_COMMON
+ * These opcodes are unique for each subsystem defined above
+ */
+#define OPCODE_COMMON_CQ_CREATE 12
+#define OPCODE_COMMON_EQ_CREATE 13
+#define OPCODE_COMMON_MCC_CREATE 21
+#define OPCODE_COMMON_GET_CNTL_ATTRIBUTES 32
+#define OPCODE_COMMON_GET_FW_VERSION 35
+#define OPCODE_COMMON_MODIFY_EQ_DELAY 41
+#define OPCODE_COMMON_FIRMWARE_CONFIG 42
+#define OPCODE_COMMON_MCC_DESTROY 53
+#define OPCODE_COMMON_CQ_DESTROY 54
+#define OPCODE_COMMON_EQ_DESTROY 55
+#define OPCODE_COMMON_QUERY_FIRMWARE_CONFIG 58
+#define OPCODE_COMMON_FUNCTION_RESET 61
+
+/**
+ * LIST of opcodes that are common between Initiator and Target
+ * used by CMD_SUBSYSTEM_ISCSI
+ * These opcodes are unique for each subsystem defined above
+ */
+#define OPCODE_COMMON_ISCSI_CFG_POST_SGL_PAGES 2
+#define OPCODE_COMMON_ISCSI_CFG_REMOVE_SGL_PAGES 3
+#define OPCODE_COMMON_ISCSI_NTWK_GET_NIC_CONFIG 7
+#define OPCODE_COMMON_ISCSI_SET_FRAGNUM_BITS_FOR_SGL_CRA 61
+#define OPCODE_COMMON_ISCSI_DEFQ_CREATE 64
+#define OPCODE_COMMON_ISCSI_DEFQ_DESTROY 65
+#define OPCODE_COMMON_ISCSI_WRBQ_CREATE 66
+#define OPCODE_COMMON_ISCSI_WRBQ_DESTROY 67
+
+struct be_cmd_req_hdr {
+ u8 opcode; /* dword 0 */
+ u8 subsystem; /* dword 0 */
+ u8 port_number; /* dword 0 */
+ u8 domain; /* dword 0 */
+ u32 timeout; /* dword 1 */
+ u32 request_length; /* dword 2 */
+ u32 rsvd; /* dword 3 */
+};
+
+struct be_cmd_resp_hdr {
+ u32 info; /* dword 0 */
+ u32 status; /* dword 1 */
+ u32 response_length; /* dword 2 */
+ u32 actual_resp_len; /* dword 3 */
+};
+
+struct phys_addr {
+ u32 lo;
+ u32 hi;
+};
+
+/**************************
+ * BE Command definitions *
+ **************************/
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte - used to calculate offset/shift/mask of each field
+ */
+struct amap_eq_context {
+ u8 cidx[13]; /* dword 0 */
+ u8 rsvd0[3]; /* dword 0 */
+ u8 epidx[13]; /* dword 0 */
+ u8 valid; /* dword 0 */
+ u8 rsvd1; /* dword 0 */
+ u8 size; /* dword 0 */
+ u8 pidx[13]; /* dword 1 */
+ u8 rsvd2[3]; /* dword 1 */
+ u8 pd[10]; /* dword 1 */
+ u8 count[3]; /* dword 1 */
+ u8 solevent; /* dword 1 */
+ u8 stalled; /* dword 1 */
+ u8 armed; /* dword 1 */
+ u8 rsvd3[4]; /* dword 2 */
+ u8 func[8]; /* dword 2 */
+ u8 rsvd4; /* dword 2 */
+ u8 delaymult[10]; /* dword 2 */
+ u8 rsvd5[2]; /* dword 2 */
+ u8 phase[2]; /* dword 2 */
+ u8 nodelay; /* dword 2 */
+ u8 rsvd6[4]; /* dword 2 */
+ u8 rsvd7[32]; /* dword 3 */
+} __packed;
+
+struct be_cmd_req_eq_create {
+ struct be_cmd_req_hdr hdr; /* dw[4] */
+ u16 num_pages; /* sword */
+ u16 rsvd0; /* sword */
+ u8 context[sizeof(struct amap_eq_context) / 8]; /* dw[4] */
+ struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_eq_create {
+ struct be_cmd_resp_hdr resp_hdr;
+ u16 eq_id; /* sword */
+ u16 rsvd0; /* sword */
+} __packed;
+
+struct mac_addr {
+ u16 size_of_struct;
+ u8 addr[ETH_ALEN];
+} __packed;
+
+struct be_cmd_req_mac_query {
+ struct be_cmd_req_hdr hdr;
+ u8 type;
+ u8 permanent;
+ u16 if_id;
+} __packed;
+
+struct be_cmd_resp_mac_query {
+ struct be_cmd_resp_hdr hdr;
+ struct mac_addr mac;
+};
+
+/******************** Create CQ ***************************/
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte - used to calculate offset/shift/mask of each field
+ */
+struct amap_cq_context {
+ u8 cidx[11]; /* dword 0 */
+ u8 rsvd0; /* dword 0 */
+ u8 coalescwm[2]; /* dword 0 */
+ u8 nodelay; /* dword 0 */
+ u8 epidx[11]; /* dword 0 */
+ u8 rsvd1; /* dword 0 */
+ u8 count[2]; /* dword 0 */
+ u8 valid; /* dword 0 */
+ u8 solevent; /* dword 0 */
+ u8 eventable; /* dword 0 */
+ u8 pidx[11]; /* dword 1 */
+ u8 rsvd2; /* dword 1 */
+ u8 pd[10]; /* dword 1 */
+ u8 eqid[8]; /* dword 1 */
+ u8 stalled; /* dword 1 */
+ u8 armed; /* dword 1 */
+ u8 rsvd3[4]; /* dword 2 */
+ u8 func[8]; /* dword 2 */
+ u8 rsvd4[20]; /* dword 2 */
+ u8 rsvd5[32]; /* dword 3 */
+} __packed;
+
+struct be_cmd_req_cq_create {
+ struct be_cmd_req_hdr hdr;
+ u16 num_pages;
+ u16 rsvd0;
+ u8 context[sizeof(struct amap_cq_context) / 8];
+ struct phys_addr pages[4];
+} __packed;
+
+struct be_cmd_resp_cq_create {
+ struct be_cmd_resp_hdr hdr;
+ u16 cq_id;
+ u16 rsvd0;
+} __packed;
+
+/******************** Create MCCQ ***************************/
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte - used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_context {
+ u8 con_index[14];
+ u8 rsvd0[2];
+ u8 ring_size[4];
+ u8 fetch_wrb;
+ u8 fetch_r2t;
+ u8 cq_id[10];
+ u8 prod_index[14];
+ u8 fid[8];
+ u8 pdid[9];
+ u8 valid;
+ u8 rsvd1[32];
+ u8 rsvd2[32];
+} __packed;
+
+struct be_cmd_req_mcc_create {
+ struct be_cmd_req_hdr hdr;
+ u16 num_pages;
+ u16 rsvd0;
+ u8 context[sizeof(struct amap_mcc_context) / 8];
+ struct phys_addr pages[8];
+} __packed;
+
+struct be_cmd_resp_mcc_create {
+ struct be_cmd_resp_hdr hdr;
+ u16 id;
+ u16 rsvd0;
+} __packed;
+
+/******************** Q Destroy ***************************/
+/* Type of Queue to be destroyed */
+enum {
+ QTYPE_EQ = 1,
+ QTYPE_CQ,
+ QTYPE_MCCQ,
+ QTYPE_WRBQ,
+ QTYPE_DPDUQ,
+ QTYPE_SGL
+};
+
+struct be_cmd_req_q_destroy {
+ struct be_cmd_req_hdr hdr;
+ u16 id;
+ u16 bypass_flush; /* valid only for rx q destroy */
+} __packed;
+
+struct macaddr {
+ u8 byte[ETH_ALEN];
+};
+
+struct be_cmd_req_mcast_mac_config {
+ struct be_cmd_req_hdr hdr;
+ u16 num_mac;
+ u8 promiscuous;
+ u8 interface_id;
+ struct macaddr mac[32];
+} __packed;
+
+static inline void *embedded_payload(struct be_mcc_wrb *wrb)
+{
+ return wrb->payload.embedded_payload;
+}
+
+static inline struct be_sge *nonembedded_sgl(struct be_mcc_wrb *wrb)
+{
+ return &wrb->payload.sgl[0];
+}
+
+/******************** Modify EQ Delay *******************/
+struct be_cmd_req_modify_eq_delay {
+ struct be_cmd_req_hdr hdr;
+ u32 num_eq;
+ struct {
+ u32 eq_id;
+ u32 phase;
+ u32 delay_multiplier;
+ } delay[8];
+} __packed;
+
+/******************** Get MAC ADDR *******************/
+
+#define ETH_ALEN 6
+
+
+struct be_cmd_req_get_mac_addr {
+ struct be_cmd_req_hdr hdr;
+ u32 nic_port_count;
+ u32 speed;
+ u32 max_speed;
+ u32 link_state;
+ u32 max_frame_size;
+ u16 size_of_structure;
+ u8 mac_address[ETH_ALEN];
+ u32 rsvd[23];
+};
+
+struct be_cmd_resp_get_mac_addr {
+ struct be_cmd_resp_hdr hdr;
+ u32 nic_port_count;
+ u32 speed;
+ u32 max_speed;
+ u32 link_state;
+ u32 max_frame_size;
+ u16 size_of_structure;
+ u8 mac_address[6];
+ u32 rsvd[23];
+};
+
+int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *eq, int eq_delay);
+
+int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl,
+ struct be_queue_info *cq, struct be_queue_info *eq,
+ bool sol_evts, bool no_delay,
+ int num_cqe_dma_coalesce);
+
+int beiscsi_cmd_q_destroy(struct be_ctrl_info *ctrl, struct be_queue_info *q,
+ int type);
+int be_poll_mcc(struct be_ctrl_info *ctrl);
+unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl);
+int be_cmd_get_mac_addr(struct be_ctrl_info *ctrl, u8 *mac_addr);
+
+/*ISCSI Functuions */
+int be_cmd_fw_initialize(struct be_ctrl_info *ctrl);
+
+struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem);
+
+int be_mbox_notify(struct be_ctrl_info *ctrl);
+
+int be_cmd_create_default_pdu_queue(struct be_ctrl_info *ctrl,
+ struct be_queue_info *cq,
+ struct be_queue_info *dq, int length,
+ int entry_size);
+
+int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl,
+ struct be_dma_mem *q_mem, u32 page_offset,
+ u32 num_pages);
+
+int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
+ struct be_queue_info *wrbq);
+
+struct be_default_pdu_context {
+ u32 dw[4];
+} __packed;
+
+struct amap_be_default_pdu_context {
+ u8 dbuf_cindex[13]; /* dword 0 */
+ u8 rsvd0[3]; /* dword 0 */
+ u8 ring_size[4]; /* dword 0 */
+ u8 ring_state[4]; /* dword 0 */
+ u8 rsvd1[8]; /* dword 0 */
+ u8 dbuf_pindex[13]; /* dword 1 */
+ u8 rsvd2; /* dword 1 */
+ u8 pci_func_id[8]; /* dword 1 */
+ u8 rx_pdid[9]; /* dword 1 */
+ u8 rx_pdid_valid; /* dword 1 */
+ u8 default_buffer_size[16]; /* dword 2 */
+ u8 cq_id_recv[10]; /* dword 2 */
+ u8 rx_pdid_not_valid; /* dword 2 */
+ u8 rsvd3[5]; /* dword 2 */
+ u8 rsvd4[32]; /* dword 3 */
+} __packed;
+
+struct be_defq_create_req {
+ struct be_cmd_req_hdr hdr;
+ u16 num_pages;
+ u8 ulp_num;
+ u8 rsvd0;
+ struct be_default_pdu_context context;
+ struct phys_addr pages[8];
+} __packed;
+
+struct be_defq_create_resp {
+ struct be_cmd_req_hdr hdr;
+ u16 id;
+ u16 rsvd0;
+} __packed;
+
+struct be_post_sgl_pages_req {
+ struct be_cmd_req_hdr hdr;
+ u16 num_pages;
+ u16 page_offset;
+ u32 rsvd0;
+ struct phys_addr pages[26];
+ u32 rsvd1;
+} __packed;
+
+struct be_wrbq_create_req {
+ struct be_cmd_req_hdr hdr;
+ u16 num_pages;
+ u8 ulp_num;
+ u8 rsvd0;
+ struct phys_addr pages[8];
+} __packed;
+
+struct be_wrbq_create_resp {
+ struct be_cmd_resp_hdr resp_hdr;
+ u16 cid;
+ u16 rsvd0;
+} __packed;
+
+#define SOL_CID_MASK 0x0000FFC0
+#define SOL_CODE_MASK 0x0000003F
+#define SOL_WRB_INDEX_MASK 0x00FF0000
+#define SOL_CMD_WND_MASK 0xFF000000
+#define SOL_RES_CNT_MASK 0x7FFFFFFF
+#define SOL_EXP_CMD_SN_MASK 0xFFFFFFFF
+#define SOL_HW_STS_MASK 0x000000FF
+#define SOL_STS_MASK 0x0000FF00
+#define SOL_RESP_MASK 0x00FF0000
+#define SOL_FLAGS_MASK 0x7F000000
+#define SOL_S_MASK 0x80000000
+
+struct sol_cqe {
+ u32 dw[4];
+};
+
+struct amap_sol_cqe {
+ u8 hw_sts[8]; /* dword 0 */
+ u8 i_sts[8]; /* dword 0 */
+ u8 i_resp[8]; /* dword 0 */
+ u8 i_flags[7]; /* dword 0 */
+ u8 s; /* dword 0 */
+ u8 i_exp_cmd_sn[32]; /* dword 1 */
+ u8 code[6]; /* dword 2 */
+ u8 cid[10]; /* dword 2 */
+ u8 wrb_index[8]; /* dword 2 */
+ u8 i_cmd_wnd[8]; /* dword 2 */
+ u8 i_res_cnt[31]; /* dword 3 */
+ u8 valid; /* dword 3 */
+} __packed;
+
+
+/**
+ * Post WRB Queue Doorbell Register used by the host Storage
+ * stack to notify the
+ * controller of a posted Work Request Block
+ */
+#define DB_WRB_POST_CID_MASK 0x3FF /* bits 0 - 9 */
+#define DB_DEF_PDU_WRB_INDEX_MASK 0xFF /* bits 0 - 9 */
+
+#define DB_DEF_PDU_WRB_INDEX_SHIFT 16
+#define DB_DEF_PDU_NUM_POSTED_SHIFT 24
+
+struct fragnum_bits_for_sgl_cra_in {
+ struct be_cmd_req_hdr hdr;
+ u32 num_bits;
+} __packed;
+
+struct iscsi_cleanup_req {
+ struct be_cmd_req_hdr hdr;
+ u16 chute;
+ u8 hdr_ring_id;
+ u8 data_ring_id;
+
+} __packed;
+
+struct eq_delay {
+ u32 eq_id;
+ u32 phase;
+ u32 delay_multiplier;
+} __packed;
+
+struct be_eq_delay_params_in {
+ struct be_cmd_req_hdr hdr;
+ u32 num_eq;
+ struct eq_delay delay[8];
+} __packed;
+
+struct ip_address_format {
+ u16 size_of_structure;
+ u8 reserved;
+ u8 ip_type;
+ u8 ip_address[16];
+ u32 rsvd0;
+} __packed;
+
+struct tcp_connect_and_offload_in {
+ struct be_cmd_req_hdr hdr;
+ struct ip_address_format ip_address;
+ u16 tcp_port;
+ u16 cid;
+ u16 cq_id;
+ u16 defq_id;
+ struct phys_addr dataout_template_pa;
+ u16 hdr_ring_id;
+ u16 data_ring_id;
+ u8 do_offload;
+ u8 rsvd0[3];
+} __packed;
+
+struct tcp_connect_and_offload_out {
+ struct be_cmd_resp_hdr hdr;
+ u32 connection_handle;
+ u16 cid;
+ u16 rsvd0;
+
+} __packed;
+
+struct be_mcc_wrb_context {
+ struct MCC_WRB *wrb;
+ int *users_final_status;
+} __packed;
+
+#define DB_DEF_PDU_RING_ID_MASK 0x3FF /* bits 0 - 9 */
+#define DB_DEF_PDU_CQPROC_MASK 0x3FFF /* bits 0 - 9 */
+#define DB_DEF_PDU_REARM_SHIFT 14
+#define DB_DEF_PDU_EVENT_SHIFT 15
+#define DB_DEF_PDU_CQPROC_SHIFT 16
+
+struct dmsg_cqe {
+ u32 dw[4];
+} __packed;
+
+struct tcp_upload_params_in {
+ struct be_cmd_req_hdr hdr;
+ u16 id;
+ u16 upload_type;
+ u32 reset_seq;
+} __packed;
+
+struct tcp_upload_params_out {
+ u32 dw[32];
+} __packed;
+
+union tcp_upload_params {
+ struct tcp_upload_params_in request;
+ struct tcp_upload_params_out response;
+} __packed;
+
+struct be_ulp_fw_cfg {
+ u32 ulp_mode;
+ u32 etx_base;
+ u32 etx_count;
+ u32 sq_base;
+ u32 sq_count;
+ u32 rq_base;
+ u32 rq_count;
+ u32 dq_base;
+ u32 dq_count;
+ u32 lro_base;
+ u32 lro_count;
+ u32 icd_base;
+ u32 icd_count;
+};
+
+struct be_fw_cfg {
+ struct be_cmd_req_hdr hdr;
+ u32 be_config_number;
+ u32 asic_revision;
+ u32 phys_port;
+ u32 function_mode;
+ struct be_ulp_fw_cfg ulp[2];
+ u32 function_caps;
+} __packed;
+
+#define CMD_ISCSI_COMMAND_INVALIDATE 1
+#define ISCSI_OPCODE_SCSI_DATA_OUT 5
+#define OPCODE_COMMON_ISCSI_TCP_CONNECT_AND_OFFLOAD 70
+#define OPCODE_ISCSI_INI_DRIVER_OFFLOAD_SESSION 41
+#define OPCODE_COMMON_MODIFY_EQ_DELAY 41
+#define OPCODE_COMMON_ISCSI_CLEANUP 59
+#define OPCODE_COMMON_TCP_UPLOAD 56
+#define OPCODE_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS 1
+/* --- CMD_ISCSI_INVALIDATE_CONNECTION_TYPE --- */
+#define CMD_ISCSI_CONNECTION_INVALIDATE 1
+#define CMD_ISCSI_CONNECTION_ISSUE_TCP_RST 2
+#define OPCODE_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION 42
+
+#define INI_WR_CMD 1 /* Initiator write command */
+#define INI_TMF_CMD 2 /* Initiator TMF command */
+#define INI_NOPOUT_CMD 3 /* Initiator; Send a NOP-OUT */
+#define INI_RD_CMD 5 /* Initiator requesting to send
+ * a read command
+ */
+#define TGT_CTX_UPDT_CMD 7 /* Target context update */
+#define TGT_STS_CMD 8 /* Target R2T and other BHS
+ * where only the status number
+ * need to be updated
+ */
+#define TGT_DATAIN_CMD 9 /* Target Data-Ins in response
+ * to read command
+ */
+#define TGT_SOS_PDU 10 /* Target:standalone status
+ * response
+ */
+#define TGT_DM_CMD 11 /* Indicates that the bhs
+ * preparedby
+ * driver should not be touched
+ */
+/* --- CMD_CHUTE_TYPE --- */
+#define CMD_CONNECTION_CHUTE_0 1
+#define CMD_CONNECTION_CHUTE_1 2
+#define CMD_CONNECTION_CHUTE_2 3
+
+#define EQ_MAJOR_CODE_COMPLETION 0
+
+#define CMD_ISCSI_SESSION_DEL_CFG_FROM_FLASH 0
+#define CMD_ISCSI_SESSION_SAVE_CFG_ON_FLASH 1
+
+/* --- CONNECTION_UPLOAD_PARAMS --- */
+/* These parameters are used to define the type of upload desired. */
+#define CONNECTION_UPLOAD_GRACEFUL 1 /* Graceful upload */
+#define CONNECTION_UPLOAD_ABORT_RESET 2 /* Abortive upload with
+ * reset
+ */
+#define CONNECTION_UPLOAD_ABORT 3 /* Abortive upload without
+ * reset
+ */
+#define CONNECTION_UPLOAD_ABORT_WITH_SEQ 4 /* Abortive upload with reset,
+ * sequence number by driver */
+
+/* Returns byte size of given field with a structure. */
+
+/* Returns the number of items in the field array. */
+#define BE_NUMBER_OF_FIELD(_type_, _field_) \
+ (FIELD_SIZEOF(_type_, _field_)/sizeof((((_type_ *)0)->_field_[0])))\
+
+/**
+ * Different types of iSCSI completions to host driver for both initiator
+ * and taget mode
+ * of operation.
+ */
+#define SOL_CMD_COMPLETE 1 /* Solicited command completed
+ * normally
+ */
+#define SOL_CMD_KILLED_DATA_DIGEST_ERR 2 /* Solicited command got
+ * invalidated internally due
+ * to Data Digest error
+ */
+#define CXN_KILLED_PDU_SIZE_EXCEEDS_DSL 3 /* Connection got invalidated
+ * internally
+ * due to a recieved PDU
+ * size > DSL
+ */
+#define CXN_KILLED_BURST_LEN_MISMATCH 4 /* Connection got invalidated
+ * internally due ti received
+ * PDU sequence size >
+ * FBL/MBL.
+ */
+#define CXN_KILLED_AHS_RCVD 5 /* Connection got invalidated
+ * internally due to a recieved
+ * PDU Hdr that has
+ * AHS */
+#define CXN_KILLED_HDR_DIGEST_ERR 6 /* Connection got invalidated
+ * internally due to Hdr Digest
+ * error
+ */
+#define CXN_KILLED_UNKNOWN_HDR 7 /* Connection got invalidated
+ * internally
+ * due to a bad opcode in the
+ * pdu hdr
+ */
+#define CXN_KILLED_STALE_ITT_TTT_RCVD 8 /* Connection got invalidated
+ * internally due to a recieved
+ * ITT/TTT that does not belong
+ * to this Connection
+ */
+#define CXN_KILLED_INVALID_ITT_TTT_RCVD 9 /* Connection got invalidated
+ * internally due to recieved
+ * ITT/TTT value > Max
+ * Supported ITTs/TTTs
+ */
+#define CXN_KILLED_RST_RCVD 10 /* Connection got invalidated
+ * internally due to an
+ * incoming TCP RST
+ */
+#define CXN_KILLED_TIMED_OUT 11 /* Connection got invalidated
+ * internally due to timeout on
+ * tcp segment 12 retransmit
+ * attempts failed
+ */
+#define CXN_KILLED_RST_SENT 12 /* Connection got invalidated
+ * internally due to TCP RST
+ * sent by the Tx side
+ */
+#define CXN_KILLED_FIN_RCVD 13 /* Connection got invalidated
+ * internally due to an
+ * incoming TCP FIN.
+ */
+#define CXN_KILLED_BAD_UNSOL_PDU_RCVD 14 /* Connection got invalidated
+ * internally due to bad
+ * unsolicited PDU Unsolicited
+ * PDUs are PDUs with
+ * ITT=0xffffffff
+ */
+#define CXN_KILLED_BAD_WRB_INDEX_ERROR 15 /* Connection got invalidated
+ * internally due to bad WRB
+ * index.
+ */
+#define CXN_KILLED_OVER_RUN_RESIDUAL 16 /* Command got invalidated
+ * internally due to recived
+ * command has residual
+ * over run bytes.
+ */
+#define CXN_KILLED_UNDER_RUN_RESIDUAL 17 /* Command got invalidated
+ * internally due to recived
+ * command has residual under
+ * run bytes.
+ */
+#define CMD_KILLED_INVALID_STATSN_RCVD 18 /* Command got invalidated
+ * internally due to a recieved
+ * PDU has an invalid StatusSN
+ */
+#define CMD_KILLED_INVALID_R2T_RCVD 19 /* Command got invalidated
+ * internally due to a recieved
+ * an R2T with some invalid
+ * fields in it
+ */
+#define CMD_CXN_KILLED_LUN_INVALID 20 /* Command got invalidated
+ * internally due to received
+ * PDU has an invalid LUN.
+ */
+#define CMD_CXN_KILLED_ICD_INVALID 21 /* Command got invalidated
+ * internally due to the
+ * corresponding ICD not in a
+ * valid state
+ */
+#define CMD_CXN_KILLED_ITT_INVALID 22 /* Command got invalidated due
+ * to received PDU has an
+ * invalid ITT.
+ */
+#define CMD_CXN_KILLED_SEQ_OUTOFORDER 23 /* Command got invalidated due
+ * to received sequence buffer
+ * offset is out of order.
+ */
+#define CMD_CXN_KILLED_INVALID_DATASN_RCVD 24 /* Command got invalidated
+ * internally due to a
+ * recieved PDU has an invalid
+ * DataSN
+ */
+#define CXN_INVALIDATE_NOTIFY 25 /* Connection invalidation
+ * completion notify.
+ */
+#define CXN_INVALIDATE_INDEX_NOTIFY 26 /* Connection invalidation
+ * completion
+ * with data PDU index.
+ */
+#define CMD_INVALIDATED_NOTIFY 27 /* Command invalidation
+ * completionnotifify.
+ */
+#define UNSOL_HDR_NOTIFY 28 /* Unsolicited header notify.*/
+#define UNSOL_DATA_NOTIFY 29 /* Unsolicited data notify.*/
+#define UNSOL_DATA_DIGEST_ERROR_NOTIFY 30 /* Unsolicited data digest
+ * error notify.
+ */
+#define DRIVERMSG_NOTIFY 31 /* TCP acknowledge based
+ * notification.
+ */
+#define CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN 32 /* Connection got invalidated
+ * internally due to command
+ * and data are not on same
+ * connection.
+ */
+#define SOL_CMD_KILLED_DIF_ERR 33 /* Solicited command got
+ * invalidated internally due
+ * to DIF error
+ */
+#define CXN_KILLED_SYN_RCVD 34 /* Connection got invalidated
+ * internally due to incoming
+ * TCP SYN
+ */
+#define CXN_KILLED_IMM_DATA_RCVD 35 /* Connection got invalidated
+ * internally due to an
+ * incoming Unsolicited PDU
+ * that has immediate data on
+ * the cxn
+ */
+
+void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
+ bool embedded, u8 sge_cnt);
+
+void be_cmd_hdr_prepare(struct be_cmd_req_hdr *req_hdr,
+ u8 subsystem, u8 opcode, int cmd_len);
+
+#endif /* !BEISCSI_CMDS_H */
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+
+#include "be_iscsi.h"
+
+extern struct iscsi_transport beiscsi_iscsi_transport;
+
+/**
+ * beiscsi_session_create - creates a new iscsi session
+ * @cmds_max: max commands supported
+ * @qdepth: max queue depth supported
+ * @initial_cmdsn: initial iscsi CMDSN
+ */
+struct iscsi_cls_session *beiscsi_session_create(struct iscsi_endpoint *ep,
+ u16 cmds_max,
+ u16 qdepth,
+ u32 initial_cmdsn)
+{
+ struct Scsi_Host *shost;
+ struct beiscsi_endpoint *beiscsi_ep;
+ struct iscsi_cls_session *cls_session;
+ struct beiscsi_hba *phba;
+ struct iscsi_session *sess;
+ struct beiscsi_session *beiscsi_sess;
+ struct beiscsi_io_task *io_task;
+
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_session_create\n");
+
+ if (!ep) {
+ SE_DEBUG(DBG_LVL_1, "beiscsi_session_create: invalid ep \n");
+ return NULL;
+ }
+ beiscsi_ep = ep->dd_data;
+ phba = beiscsi_ep->phba;
+ shost = phba->shost;
+ if (cmds_max > beiscsi_ep->phba->params.wrbs_per_cxn) {
+ shost_printk(KERN_ERR, shost, "Cannot handle %d cmds."
+ "Max cmds per session supported is %d. Using %d. "
+ "\n", cmds_max,
+ beiscsi_ep->phba->params.wrbs_per_cxn,
+ beiscsi_ep->phba->params.wrbs_per_cxn);
+ cmds_max = beiscsi_ep->phba->params.wrbs_per_cxn;
+ }
+
+ cls_session = iscsi_session_setup(&beiscsi_iscsi_transport,
+ shost, cmds_max,
+ sizeof(*beiscsi_sess),
+ sizeof(*io_task),
+ initial_cmdsn, ISCSI_MAX_TARGET);
+ if (!cls_session)
+ return NULL;
+ sess = cls_session->dd_data;
+ beiscsi_sess = sess->dd_data;
+ beiscsi_sess->bhs_pool = pci_pool_create("beiscsi_bhs_pool",
+ phba->pcidev,
+ sizeof(struct be_cmd_bhs),
+ 64, 0);
+ if (!beiscsi_sess->bhs_pool)
+ goto destroy_sess;
+
+ return cls_session;
+destroy_sess:
+ iscsi_session_teardown(cls_session);
+ return NULL;
+}
+
+/**
+ * beiscsi_session_destroy - destroys iscsi session
+ * @cls_session: pointer to iscsi cls session
+ *
+ * Destroys iSCSI session instance and releases
+ * resources allocated for it.
+ */
+void beiscsi_session_destroy(struct iscsi_cls_session *cls_session)
+{
+ struct iscsi_session *sess = cls_session->dd_data;
+ struct beiscsi_session *beiscsi_sess = sess->dd_data;
+
+ pci_pool_destroy(beiscsi_sess->bhs_pool);
+ iscsi_session_teardown(cls_session);
+}
+
+/**
+ * beiscsi_conn_create - create an instance of iscsi connection
+ * @cls_session: ptr to iscsi_cls_session
+ * @cid: iscsi cid
+ */
+struct iscsi_cls_conn *
+beiscsi_conn_create(struct iscsi_cls_session *cls_session, u32 cid)
+{
+ struct beiscsi_hba *phba;
+ struct Scsi_Host *shost;
+ struct iscsi_cls_conn *cls_conn;
+ struct beiscsi_conn *beiscsi_conn;
+ struct iscsi_conn *conn;
+ struct iscsi_session *sess;
+ struct beiscsi_session *beiscsi_sess;
+
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_create ,cid"
+ "from iscsi layer=%d\n", cid);
+ shost = iscsi_session_to_shost(cls_session);
+ phba = iscsi_host_priv(shost);
+
+ cls_conn = iscsi_conn_setup(cls_session, sizeof(*beiscsi_conn), cid);
+ if (!cls_conn)
+ return NULL;
+
+ conn = cls_conn->dd_data;
+ beiscsi_conn = conn->dd_data;
+ beiscsi_conn->ep = NULL;
+ beiscsi_conn->phba = phba;
+ beiscsi_conn->conn = conn;
+ sess = cls_session->dd_data;
+ beiscsi_sess = sess->dd_data;
+ beiscsi_conn->beiscsi_sess = beiscsi_sess;
+ return cls_conn;
+}
+
+/**
+ * beiscsi_bindconn_cid - Bind the beiscsi_conn with phba connection table
+ * @beiscsi_conn: The pointer to beiscsi_conn structure
+ * @phba: The phba instance
+ * @cid: The cid to free
+ */
+static int beiscsi_bindconn_cid(struct beiscsi_hba *phba,
+ struct beiscsi_conn *beiscsi_conn,
+ unsigned int cid)
+{
+ if (phba->conn_table[cid]) {
+ SE_DEBUG(DBG_LVL_1,
+ "Connection table already occupied. Detected clash\n");
+ return -EINVAL;
+ } else {
+ SE_DEBUG(DBG_LVL_8, "phba->conn_table[%d]=%p(beiscsi_conn) \n",
+ cid, beiscsi_conn);
+ phba->conn_table[cid] = beiscsi_conn;
+ }
+ return 0;
+}
+
+/**
+ * beiscsi_conn_bind - Binds iscsi session/connection with TCP connection
+ * @cls_session: pointer to iscsi cls session
+ * @cls_conn: pointer to iscsi cls conn
+ * @transport_fd: EP handle(64 bit)
+ *
+ * This function binds the TCP Conn with iSCSI Connection and Session.
+ */
+int beiscsi_conn_bind(struct iscsi_cls_session *cls_session,
+ struct iscsi_cls_conn *cls_conn,
+ u64 transport_fd, int is_leading)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ struct Scsi_Host *shost =
+ (struct Scsi_Host *)iscsi_session_to_shost(cls_session);
+ struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
+ struct beiscsi_endpoint *beiscsi_ep;
+ struct iscsi_endpoint *ep;
+
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_bind\n");
+ ep = iscsi_lookup_endpoint(transport_fd);
+ if (!ep)
+ return -EINVAL;
+
+ beiscsi_ep = ep->dd_data;
+
+ if (iscsi_conn_bind(cls_session, cls_conn, is_leading))
+ return -EINVAL;
+
+ if (beiscsi_ep->phba != phba) {
+ SE_DEBUG(DBG_LVL_8,
+ "beiscsi_ep->hba=%p not equal to phba=%p \n",
+ beiscsi_ep->phba, phba);
+ return -EEXIST;
+ }
+
+ beiscsi_conn->beiscsi_conn_cid = beiscsi_ep->ep_cid;
+ beiscsi_conn->ep = beiscsi_ep;
+ beiscsi_ep->conn = beiscsi_conn;
+ SE_DEBUG(DBG_LVL_8, "beiscsi_conn=%p conn=%p ep_cid=%d \n",
+ beiscsi_conn, conn, beiscsi_ep->ep_cid);
+ return beiscsi_bindconn_cid(phba, beiscsi_conn, beiscsi_ep->ep_cid);
+}
+
+/**
+ * beiscsi_conn_get_param - get the iscsi parameter
+ * @cls_conn: pointer to iscsi cls conn
+ * @param: parameter type identifier
+ * @buf: buffer pointer
+ *
+ * returns iscsi parameter
+ */
+int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+ enum iscsi_param param, char *buf)
+{
+ struct beiscsi_endpoint *beiscsi_ep;
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ int len = 0;
+
+ beiscsi_ep = beiscsi_conn->ep;
+ if (!beiscsi_ep) {
+ SE_DEBUG(DBG_LVL_1,
+ "In beiscsi_conn_get_param , no beiscsi_ep\n");
+ return -1;
+ }
+
+ switch (param) {
+ case ISCSI_PARAM_CONN_PORT:
+ len = sprintf(buf, "%hu\n", beiscsi_ep->dst_tcpport);
+ break;
+ case ISCSI_PARAM_CONN_ADDRESS:
+ if (beiscsi_ep->ip_type == BE2_IPV4)
+ len = sprintf(buf, "%pI4\n", &beiscsi_ep->dst_addr);
+ else
+ len = sprintf(buf, "%pI6\n", &beiscsi_ep->dst6_addr);
+ break;
+ default:
+ return iscsi_conn_get_param(cls_conn, param, buf);
+ }
+ return len;
+}
+
+int beiscsi_set_param(struct iscsi_cls_conn *cls_conn,
+ enum iscsi_param param, char *buf, int buflen)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct iscsi_session *session = conn->session;
+ int ret;
+
+ ret = iscsi_set_param(cls_conn, param, buf, buflen);
+ if (ret)
+ return ret;
+ /*
+ * If userspace tried to set the value to higher than we can
+ * support override here.
+ */
+ switch (param) {
+ case ISCSI_PARAM_FIRST_BURST:
+ if (session->first_burst > 8192)
+ session->first_burst = 8192;
+ break;
+ case ISCSI_PARAM_MAX_RECV_DLENGTH:
+ if (conn->max_recv_dlength > 65536)
+ conn->max_recv_dlength = 65536;
+ break;
+ case ISCSI_PARAM_MAX_BURST:
+ if (session->first_burst > 262144)
+ session->first_burst = 262144;
+ break;
+ default:
+ return 0;
+ }
+
+ return 0;
+}
+
+/**
+ * beiscsi_get_host_param - get the iscsi parameter
+ * @shost: pointer to scsi_host structure
+ * @param: parameter type identifier
+ * @buf: buffer pointer
+ *
+ * returns host parameter
+ */
+int beiscsi_get_host_param(struct Scsi_Host *shost,
+ enum iscsi_host_param param, char *buf)
+{
+ struct beiscsi_hba *phba = (struct beiscsi_hba *)iscsi_host_priv(shost);
+ int len = 0;
+
+ switch (param) {
+ case ISCSI_HOST_PARAM_HWADDRESS:
+ be_cmd_get_mac_addr(&phba->ctrl, phba->mac_address);
+ len = sysfs_format_mac(buf, phba->mac_address, ETH_ALEN);
+ break;
+ default:
+ return iscsi_host_get_param(shost, param, buf);
+ }
+ return len;
+}
+
+/**
+ * beiscsi_conn_get_stats - get the iscsi stats
+ * @cls_conn: pointer to iscsi cls conn
+ * @stats: pointer to iscsi_stats structure
+ *
+ * returns iscsi stats
+ */
+void beiscsi_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+ struct iscsi_stats *stats)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_get_stats\n");
+ stats->txdata_octets = conn->txdata_octets;
+ stats->rxdata_octets = conn->rxdata_octets;
+ stats->dataout_pdus = conn->dataout_pdus_cnt;
+ stats->scsirsp_pdus = conn->scsirsp_pdus_cnt;
+ stats->scsicmd_pdus = conn->scsicmd_pdus_cnt;
+ stats->datain_pdus = conn->datain_pdus_cnt;
+ stats->tmfrsp_pdus = conn->tmfrsp_pdus_cnt;
+ stats->tmfcmd_pdus = conn->tmfcmd_pdus_cnt;
+ stats->r2t_pdus = conn->r2t_pdus_cnt;
+ stats->digest_err = 0;
+ stats->timeout_err = 0;
+ stats->custom_length = 0;
+ strcpy(stats->custom[0].desc, "eh_abort_cnt");
+ stats->custom[0].value = conn->eh_abort_cnt;
+}
+
+/**
+ * beiscsi_set_params_for_offld - get the parameters for offload
+ * @beiscsi_conn: pointer to beiscsi_conn
+ * @params: pointer to offload_params structure
+ */
+static void beiscsi_set_params_for_offld(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_offload_params *params)
+{
+ struct iscsi_conn *conn = beiscsi_conn->conn;
+ struct iscsi_session *session = conn->session;
+
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params, max_burst_length,
+ params, session->max_burst);
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params,
+ max_send_data_segment_length, params,
+ conn->max_xmit_dlength);
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params, first_burst_length,
+ params, session->first_burst);
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params, erl, params,
+ session->erl);
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params, dde, params,
+ conn->datadgst_en);
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params, hde, params,
+ conn->hdrdgst_en);
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params, ir2t, params,
+ session->initial_r2t_en);
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params, imd, params,
+ session->imm_data_en);
+ AMAP_SET_BITS(struct amap_beiscsi_offload_params, exp_statsn, params,
+ (conn->exp_statsn - 1));
+}
+
+/**
+ * beiscsi_conn_start - offload of session to chip
+ * @cls_conn: pointer to beiscsi_conn
+ */
+int beiscsi_conn_start(struct iscsi_cls_conn *cls_conn)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ struct beiscsi_endpoint *beiscsi_ep;
+ struct beiscsi_offload_params params;
+ struct iscsi_session *session = conn->session;
+ struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+ struct beiscsi_hba *phba = iscsi_host_priv(shost);
+
+ memset(¶ms, 0, sizeof(struct beiscsi_offload_params));
+ beiscsi_ep = beiscsi_conn->ep;
+ if (!beiscsi_ep)
+ SE_DEBUG(DBG_LVL_1, "In beiscsi_conn_start , no beiscsi_ep\n");
+
+ free_mgmt_sgl_handle(phba, beiscsi_conn->plogin_sgl_handle);
+ beiscsi_conn->login_in_progress = 0;
+ beiscsi_set_params_for_offld(beiscsi_conn, ¶ms);
+ beiscsi_offload_connection(beiscsi_conn, ¶ms);
+ iscsi_conn_start(cls_conn);
+ return 0;
+}
+
+/**
+ * beiscsi_get_cid - Allocate a cid
+ * @phba: The phba instance
+ */
+static int beiscsi_get_cid(struct beiscsi_hba *phba)
+{
+ unsigned short cid = 0xFFFF;
+
+ if (!phba->avlbl_cids)
+ return cid;
+
+ cid = phba->cid_array[phba->cid_alloc++];
+ if (phba->cid_alloc == phba->params.cxns_per_ctrl)
+ phba->cid_alloc = 0;
+ phba->avlbl_cids--;
+ return cid;
+}
+
+/**
+ * beiscsi_open_conn - Ask FW to open a TCP connection
+ * @ep: endpoint to be used
+ * @src_addr: The source IP address
+ * @dst_addr: The Destination IP address
+ *
+ * Asks the FW to open a TCP connection
+ */
+static int beiscsi_open_conn(struct iscsi_endpoint *ep,
+ struct sockaddr *src_addr,
+ struct sockaddr *dst_addr, int non_blocking)
+{
+ struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+ struct beiscsi_hba *phba = beiscsi_ep->phba;
+ int ret = -1;
+
+ beiscsi_ep->ep_cid = beiscsi_get_cid(phba);
+ if (beiscsi_ep->ep_cid == 0xFFFF) {
+ SE_DEBUG(DBG_LVL_1, "No free cid available\n");
+ return ret;
+ }
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_open_conn, ep_cid=%d ",
+ beiscsi_ep->ep_cid);
+ phba->ep_array[beiscsi_ep->ep_cid] = ep;
+ if (beiscsi_ep->ep_cid >
+ (phba->fw_config.iscsi_cid_start + phba->params.cxns_per_ctrl)) {
+ SE_DEBUG(DBG_LVL_1, "Failed in allocate iscsi cid\n");
+ return ret;
+ }
+
+ beiscsi_ep->cid_vld = 0;
+ return mgmt_open_connection(phba, dst_addr, beiscsi_ep);
+}
+
+/**
+ * beiscsi_put_cid - Free the cid
+ * @phba: The phba for which the cid is being freed
+ * @cid: The cid to free
+ */
+static void beiscsi_put_cid(struct beiscsi_hba *phba, unsigned short cid)
+{
+ phba->avlbl_cids++;
+ phba->cid_array[phba->cid_free++] = cid;
+ if (phba->cid_free == phba->params.cxns_per_ctrl)
+ phba->cid_free = 0;
+}
+
+/**
+ * beiscsi_free_ep - free endpoint
+ * @ep: pointer to iscsi endpoint structure
+ */
+static void beiscsi_free_ep(struct iscsi_endpoint *ep)
+{
+ struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+ struct beiscsi_hba *phba = beiscsi_ep->phba;
+
+ beiscsi_put_cid(phba, beiscsi_ep->ep_cid);
+ beiscsi_ep->phba = NULL;
+ iscsi_destroy_endpoint(ep);
+}
+
+/**
+ * beiscsi_ep_connect - Ask chip to create TCP Conn
+ * @scsi_host: Pointer to scsi_host structure
+ * @dst_addr: The IP address of Target
+ * @non_blocking: blocking or non-blocking call
+ *
+ * This routines first asks chip to create a connection and then allocates an EP
+ */
+struct iscsi_endpoint *
+beiscsi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
+ int non_blocking)
+{
+ struct beiscsi_hba *phba;
+ struct beiscsi_endpoint *beiscsi_ep;
+ struct iscsi_endpoint *ep;
+ int ret;
+
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_ep_connect \n");
+ if (shost)
+ phba = iscsi_host_priv(shost);
+ else {
+ ret = -ENXIO;
+ SE_DEBUG(DBG_LVL_1, "shost is NULL \n");
+ return ERR_PTR(ret);
+ }
+ ep = iscsi_create_endpoint(sizeof(struct beiscsi_endpoint));
+ if (!ep) {
+ ret = -ENOMEM;
+ return ERR_PTR(ret);
+ }
+
+ beiscsi_ep = ep->dd_data;
+ beiscsi_ep->phba = phba;
+
+ if (beiscsi_open_conn(ep, NULL, dst_addr, non_blocking)) {
+ SE_DEBUG(DBG_LVL_1, "Failed in allocate iscsi cid\n");
+ ret = -ENOMEM;
+ goto free_ep;
+ }
+
+ return ep;
+
+free_ep:
+ beiscsi_free_ep(ep);
+ return ERR_PTR(ret);
+}
+
+/**
+ * beiscsi_ep_poll - Poll to see if connection is established
+ * @ep: endpoint to be used
+ * @timeout_ms: timeout specified in millisecs
+ *
+ * Poll to see if TCP connection established
+ */
+int beiscsi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms)
+{
+ struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_ep_poll\n");
+ if (beiscsi_ep->cid_vld == 1)
+ return 1;
+ else
+ return 0;
+}
+
+/**
+ * beiscsi_close_conn - Upload the connection
+ * @ep: The iscsi endpoint
+ * @flag: The type of connection closure
+ */
+static int beiscsi_close_conn(struct iscsi_endpoint *ep, int flag)
+{
+ int ret = 0;
+ struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
+ struct beiscsi_hba *phba = beiscsi_ep->phba;
+
+ if (MGMT_STATUS_SUCCESS !=
+ mgmt_upload_connection(phba, beiscsi_ep->ep_cid,
+ CONNECTION_UPLOAD_GRACEFUL)) {
+ SE_DEBUG(DBG_LVL_8, "upload failed for cid 0x%x",
+ beiscsi_ep->ep_cid);
+ ret = -1;
+ }
+
+ return ret;
+}
+
+/**
+ * beiscsi_ep_disconnect - Tears down the TCP connection
+ * @ep: endpoint to be used
+ *
+ * Tears down the TCP connection
+ */
+void beiscsi_ep_disconnect(struct iscsi_endpoint *ep)
+{
+ struct beiscsi_conn *beiscsi_conn;
+ struct beiscsi_endpoint *beiscsi_ep;
+ struct beiscsi_hba *phba;
+ int flag = 0;
+
+ beiscsi_ep = ep->dd_data;
+ phba = beiscsi_ep->phba;
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_ep_disconnect\n");
+
+ if (beiscsi_ep->conn) {
+ beiscsi_conn = beiscsi_ep->conn;
+ iscsi_suspend_queue(beiscsi_conn->conn);
+ beiscsi_close_conn(ep, flag);
+ }
+
+ beiscsi_free_ep(ep);
+}
+
+/**
+ * beiscsi_unbind_conn_to_cid - Unbind the beiscsi_conn from phba conn table
+ * @phba: The phba instance
+ * @cid: The cid to free
+ */
+static int beiscsi_unbind_conn_to_cid(struct beiscsi_hba *phba,
+ unsigned int cid)
+{
+ if (phba->conn_table[cid])
+ phba->conn_table[cid] = NULL;
+ else {
+ SE_DEBUG(DBG_LVL_8, "Connection table Not occupied. \n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * beiscsi_conn_stop - Invalidate and stop the connection
+ * @cls_conn: pointer to get iscsi_conn
+ * @flag: The type of connection closure
+ */
+void beiscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
+{
+ struct iscsi_conn *conn = cls_conn->dd_data;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ struct beiscsi_endpoint *beiscsi_ep;
+ struct iscsi_session *session = conn->session;
+ struct Scsi_Host *shost = iscsi_session_to_shost(session->cls_session);
+ struct beiscsi_hba *phba = iscsi_host_priv(shost);
+ unsigned int status;
+ unsigned short savecfg_flag = CMD_ISCSI_SESSION_SAVE_CFG_ON_FLASH;
+
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_stop\n");
+ beiscsi_ep = beiscsi_conn->ep;
+ if (!beiscsi_ep) {
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_stop , no beiscsi_ep\n");
+ return;
+ }
+ status = mgmt_invalidate_connection(phba, beiscsi_ep,
+ beiscsi_ep->ep_cid, 1,
+ savecfg_flag);
+ if (status != MGMT_STATUS_SUCCESS) {
+ SE_DEBUG(DBG_LVL_1,
+ "mgmt_invalidate_connection Failed for cid=%d \n",
+ beiscsi_ep->ep_cid);
+ }
+ beiscsi_unbind_conn_to_cid(phba, beiscsi_ep->ep_cid);
+ iscsi_conn_stop(cls_conn, flag);
+}
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#ifndef _BE_ISCSI_
+#define _BE_ISCSI_
+
+#include "be_main.h"
+#include "be_mgmt.h"
+
+#define BE2_IPV4 0x1
+#define BE2_IPV6 0x10
+
+void beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_offload_params *params);
+
+void beiscsi_offload_iscsi(struct beiscsi_hba *phba, struct iscsi_conn *conn,
+ struct beiscsi_conn *beiscsi_conn,
+ unsigned int fw_handle);
+
+struct iscsi_cls_session *beiscsi_session_create(struct iscsi_endpoint *ep,
+ uint16_t cmds_max,
+ uint16_t qdepth,
+ uint32_t initial_cmdsn);
+
+void beiscsi_session_destroy(struct iscsi_cls_session *cls_session);
+
+struct iscsi_cls_conn *beiscsi_conn_create(struct iscsi_cls_session
+ *cls_session, uint32_t cid);
+
+int beiscsi_conn_bind(struct iscsi_cls_session *cls_session,
+ struct iscsi_cls_conn *cls_conn,
+ uint64_t transport_fd, int is_leading);
+
+int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+ enum iscsi_param param, char *buf);
+
+int beiscsi_get_host_param(struct Scsi_Host *shost,
+ enum iscsi_host_param param, char *buf);
+
+int beiscsi_set_param(struct iscsi_cls_conn *cls_conn,
+ enum iscsi_param param, char *buf, int buflen);
+
+int beiscsi_conn_start(struct iscsi_cls_conn *cls_conn);
+
+void beiscsi_conn_stop(struct iscsi_cls_conn *cls_conn, int flag);
+
+struct iscsi_endpoint *beiscsi_ep_connect(struct Scsi_Host *shost,
+ struct sockaddr *dst_addr,
+ int non_blocking);
+
+int beiscsi_ep_poll(struct iscsi_endpoint *ep, int timeout_ms);
+
+void beiscsi_ep_disconnect(struct iscsi_endpoint *ep);
+
+void beiscsi_conn_get_stats(struct iscsi_cls_conn *cls_conn,
+ struct iscsi_stats *stats);
+
+#endif
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+#include <linux/reboot.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/semaphore.h>
+
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi.h>
+#include "be_main.h"
+#include "be_iscsi.h"
+#include "be_mgmt.h"
+
+static unsigned int be_iopoll_budget = 10;
+static unsigned int be_max_phys_size = 64;
+static unsigned int enable_msix;
+
+MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
+MODULE_DESCRIPTION(DRV_DESC " " BUILD_STR);
+MODULE_AUTHOR("ServerEngines Corporation");
+MODULE_LICENSE("GPL");
+module_param(be_iopoll_budget, int, 0);
+module_param(enable_msix, int, 0);
+module_param(be_max_phys_size, uint, S_IRUGO);
+MODULE_PARM_DESC(be_max_phys_size, "Maximum Size (In Kilobytes) of physically"
+ "contiguous memory that can be allocated."
+ "Range is 16 - 128");
+
+static int beiscsi_slave_configure(struct scsi_device *sdev)
+{
+ blk_queue_max_segment_size(sdev->request_queue, 65536);
+ return 0;
+}
+
+static struct scsi_host_template beiscsi_sht = {
+ .module = THIS_MODULE,
+ .name = "ServerEngines 10Gbe open-iscsi Initiator Driver",
+ .proc_name = DRV_NAME,
+ .queuecommand = iscsi_queuecommand,
+ .eh_abort_handler = iscsi_eh_abort,
+ .change_queue_depth = iscsi_change_queue_depth,
+ .slave_configure = beiscsi_slave_configure,
+ .target_alloc = iscsi_target_alloc,
+ .eh_device_reset_handler = iscsi_eh_device_reset,
+ .eh_target_reset_handler = iscsi_eh_target_reset,
+ .sg_tablesize = BEISCSI_SGLIST_ELEMENTS,
+ .can_queue = BE2_IO_DEPTH,
+ .this_id = -1,
+ .max_sectors = BEISCSI_MAX_SECTORS,
+ .cmd_per_lun = BEISCSI_CMD_PER_LUN,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+static struct scsi_transport_template *beiscsi_scsi_transport;
+
+/*------------------- PCI Driver operations and data ----------------- */
+static DEFINE_PCI_DEVICE_TABLE(beiscsi_pci_id_table) = {
+ { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(pci, beiscsi_pci_id_table);
+
+static struct beiscsi_hba *beiscsi_hba_alloc(struct pci_dev *pcidev)
+{
+ struct beiscsi_hba *phba;
+ struct Scsi_Host *shost;
+
+ shost = iscsi_host_alloc(&beiscsi_sht, sizeof(*phba), 0);
+ if (!shost) {
+ dev_err(&pcidev->dev, "beiscsi_hba_alloc -"
+ "iscsi_host_alloc failed \n");
+ return NULL;
+ }
+ shost->dma_boundary = pcidev->dma_mask;
+ shost->max_id = BE2_MAX_SESSIONS;
+ shost->max_channel = 0;
+ shost->max_cmd_len = BEISCSI_MAX_CMD_LEN;
+ shost->max_lun = BEISCSI_NUM_MAX_LUN;
+ shost->transportt = beiscsi_scsi_transport;
+
+ phba = iscsi_host_priv(shost);
+ memset(phba, 0, sizeof(*phba));
+ phba->shost = shost;
+ phba->pcidev = pci_dev_get(pcidev);
+
+ if (iscsi_host_add(shost, &phba->pcidev->dev))
+ goto free_devices;
+ return phba;
+
+free_devices:
+ pci_dev_put(phba->pcidev);
+ iscsi_host_free(phba->shost);
+ return NULL;
+}
+
+static void beiscsi_unmap_pci_function(struct beiscsi_hba *phba)
+{
+ if (phba->csr_va) {
+ iounmap(phba->csr_va);
+ phba->csr_va = NULL;
+ }
+ if (phba->db_va) {
+ iounmap(phba->db_va);
+ phba->db_va = NULL;
+ }
+ if (phba->pci_va) {
+ iounmap(phba->pci_va);
+ phba->pci_va = NULL;
+ }
+}
+
+static int beiscsi_map_pci_bars(struct beiscsi_hba *phba,
+ struct pci_dev *pcidev)
+{
+ u8 __iomem *addr;
+
+ addr = ioremap_nocache(pci_resource_start(pcidev, 2),
+ pci_resource_len(pcidev, 2));
+ if (addr == NULL)
+ return -ENOMEM;
+ phba->ctrl.csr = addr;
+ phba->csr_va = addr;
+ phba->csr_pa.u.a64.address = pci_resource_start(pcidev, 2);
+
+ addr = ioremap_nocache(pci_resource_start(pcidev, 4), 128 * 1024);
+ if (addr == NULL)
+ goto pci_map_err;
+ phba->ctrl.db = addr;
+ phba->db_va = addr;
+ phba->db_pa.u.a64.address = pci_resource_start(pcidev, 4);
+
+ addr = ioremap_nocache(pci_resource_start(pcidev, 1),
+ pci_resource_len(pcidev, 1));
+ if (addr == NULL)
+ goto pci_map_err;
+ phba->ctrl.pcicfg = addr;
+ phba->pci_va = addr;
+ phba->pci_pa.u.a64.address = pci_resource_start(pcidev, 1);
+ return 0;
+
+pci_map_err:
+ beiscsi_unmap_pci_function(phba);
+ return -ENOMEM;
+}
+
+static int beiscsi_enable_pci(struct pci_dev *pcidev)
+{
+ int ret;
+
+ ret = pci_enable_device(pcidev);
+ if (ret) {
+ dev_err(&pcidev->dev, "beiscsi_enable_pci - enable device "
+ "failed. Returning -ENODEV\n");
+ return ret;
+ }
+
+ if (pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64))) {
+ ret = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
+ if (ret) {
+ dev_err(&pcidev->dev, "Could not set PCI DMA Mask\n");
+ pci_disable_device(pcidev);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int be_ctrl_init(struct beiscsi_hba *phba, struct pci_dev *pdev)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_dma_mem *mbox_mem_alloc = &ctrl->mbox_mem_alloced;
+ struct be_dma_mem *mbox_mem_align = &ctrl->mbox_mem;
+ int status = 0;
+
+ ctrl->pdev = pdev;
+ status = beiscsi_map_pci_bars(phba, pdev);
+ if (status)
+ return status;
+
+ mbox_mem_alloc->size = sizeof(struct be_mcc_mailbox) + 16;
+ mbox_mem_alloc->va = pci_alloc_consistent(pdev,
+ mbox_mem_alloc->size,
+ &mbox_mem_alloc->dma);
+ if (!mbox_mem_alloc->va) {
+ beiscsi_unmap_pci_function(phba);
+ status = -ENOMEM;
+ return status;
+ }
+
+ mbox_mem_align->size = sizeof(struct be_mcc_mailbox);
+ mbox_mem_align->va = PTR_ALIGN(mbox_mem_alloc->va, 16);
+ mbox_mem_align->dma = PTR_ALIGN(mbox_mem_alloc->dma, 16);
+ memset(mbox_mem_align->va, 0, sizeof(struct be_mcc_mailbox));
+ spin_lock_init(&ctrl->mbox_lock);
+ return status;
+}
+
+static void beiscsi_get_params(struct beiscsi_hba *phba)
+{
+ phba->params.ios_per_ctrl = BE2_IO_DEPTH;
+ phba->params.cxns_per_ctrl = BE2_MAX_SESSIONS;
+ phba->params.asyncpdus_per_ctrl = BE2_ASYNCPDUS;
+ phba->params.icds_per_ctrl = BE2_MAX_ICDS / 2;
+ phba->params.num_sge_per_io = BE2_SGE;
+ phba->params.defpdu_hdr_sz = BE2_DEFPDU_HDR_SZ;
+ phba->params.defpdu_data_sz = BE2_DEFPDU_DATA_SZ;
+ phba->params.eq_timer = 64;
+ phba->params.num_eq_entries =
+ (((BE2_CMDS_PER_CXN * 2 + BE2_LOGOUTS + BE2_TMFS + BE2_ASYNCPDUS) /
+ 512) + 1) * 512;
+ phba->params.num_eq_entries = (phba->params.num_eq_entries < 1024)
+ ? 1024 : phba->params.num_eq_entries;
+ SE_DEBUG(DBG_LVL_8, "phba->params.num_eq_entries=%d \n",
+ phba->params.num_eq_entries);
+ phba->params.num_cq_entries =
+ (((BE2_CMDS_PER_CXN * 2 + BE2_LOGOUTS + BE2_TMFS + BE2_ASYNCPDUS) /
+ 512) + 1) * 512;
+ SE_DEBUG(DBG_LVL_8,
+ "phba->params.num_cq_entries=%d BE2_CMDS_PER_CXN=%d"
+ "BE2_LOGOUTS=%d BE2_TMFS=%d BE2_ASYNCPDUS=%d \n",
+ phba->params.num_cq_entries, BE2_CMDS_PER_CXN,
+ BE2_LOGOUTS, BE2_TMFS, BE2_ASYNCPDUS);
+ phba->params.wrbs_per_cxn = 256;
+}
+
+static void hwi_ring_eq_db(struct beiscsi_hba *phba,
+ unsigned int id, unsigned int clr_interrupt,
+ unsigned int num_processed,
+ unsigned char rearm, unsigned char event)
+{
+ u32 val = 0;
+ val |= id & DB_EQ_RING_ID_MASK;
+ if (rearm)
+ val |= 1 << DB_EQ_REARM_SHIFT;
+ if (clr_interrupt)
+ val |= 1 << DB_EQ_CLR_SHIFT;
+ if (event)
+ val |= 1 << DB_EQ_EVNT_SHIFT;
+ val |= num_processed << DB_EQ_NUM_POPPED_SHIFT;
+ iowrite32(val, phba->db_va + DB_EQ_OFFSET);
+}
+
+/**
+ * be_isr - The isr routine of the driver.
+ * @irq: Not used
+ * @dev_id: Pointer to host adapter structure
+ */
+static irqreturn_t be_isr(int irq, void *dev_id)
+{
+ struct beiscsi_hba *phba;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ struct be_eq_entry *eqe = NULL;
+ struct be_queue_info *eq;
+ struct be_queue_info *cq;
+ unsigned long flags, index;
+ unsigned int num_eq_processed;
+ struct be_ctrl_info *ctrl;
+ int isr;
+
+ phba = dev_id;
+ if (!enable_msix) {
+ ctrl = &phba->ctrl;;
+ isr = ioread32(ctrl->csr + CEV_ISR0_OFFSET +
+ (PCI_FUNC(ctrl->pdev->devfn) * CEV_ISR_SIZE));
+ if (!isr)
+ return IRQ_NONE;
+ }
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+ eq = &phwi_context->be_eq.q;
+ cq = &phwi_context->be_cq;
+ index = 0;
+ eqe = queue_tail_node(eq);
+ if (!eqe)
+ SE_DEBUG(DBG_LVL_1, "eqe is NULL\n");
+
+ num_eq_processed = 0;
+ if (blk_iopoll_enabled) {
+ while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+ & EQE_VALID_MASK) {
+ if (!blk_iopoll_sched_prep(&phba->iopoll))
+ blk_iopoll_sched(&phba->iopoll);
+
+ AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+ queue_tail_inc(eq);
+ eqe = queue_tail_node(eq);
+ num_eq_processed++;
+ SE_DEBUG(DBG_LVL_8, "Valid EQE\n");
+ }
+ if (num_eq_processed) {
+ hwi_ring_eq_db(phba, eq->id, 0, num_eq_processed, 0, 1);
+ return IRQ_HANDLED;
+ } else
+ return IRQ_NONE;
+ } else {
+ while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+ & EQE_VALID_MASK) {
+
+ if (((eqe->dw[offsetof(struct amap_eq_entry,
+ resource_id) / 32] &
+ EQE_RESID_MASK) >> 16) != cq->id) {
+ spin_lock_irqsave(&phba->isr_lock, flags);
+ phba->todo_mcc_cq = 1;
+ spin_unlock_irqrestore(&phba->isr_lock, flags);
+ } else {
+ spin_lock_irqsave(&phba->isr_lock, flags);
+ phba->todo_cq = 1;
+ spin_unlock_irqrestore(&phba->isr_lock, flags);
+ }
+ AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+ queue_tail_inc(eq);
+ eqe = queue_tail_node(eq);
+ num_eq_processed++;
+ }
+ if (phba->todo_cq || phba->todo_mcc_cq)
+ queue_work(phba->wq, &phba->work_cqs);
+
+ if (num_eq_processed) {
+ hwi_ring_eq_db(phba, eq->id, 0, num_eq_processed, 1, 1);
+ return IRQ_HANDLED;
+ } else
+ return IRQ_NONE;
+ }
+}
+
+static int beiscsi_init_irqs(struct beiscsi_hba *phba)
+{
+ struct pci_dev *pcidev = phba->pcidev;
+ int ret;
+
+ ret = request_irq(pcidev->irq, be_isr, IRQF_SHARED, "beiscsi", phba);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_init_irqs-"
+ "Failed to register irq\\n");
+ return ret;
+ }
+ return 0;
+}
+
+static void hwi_ring_cq_db(struct beiscsi_hba *phba,
+ unsigned int id, unsigned int num_processed,
+ unsigned char rearm, unsigned char event)
+{
+ u32 val = 0;
+ val |= id & DB_CQ_RING_ID_MASK;
+ if (rearm)
+ val |= 1 << DB_CQ_REARM_SHIFT;
+ val |= num_processed << DB_CQ_NUM_POPPED_SHIFT;
+ iowrite32(val, phba->db_va + DB_CQ_OFFSET);
+}
+
+/*
+ * async pdus include
+ * a. unsolicited NOP-In (target initiated NOP-In)
+ * b. Async Messages
+ * c. Reject PDU
+ * d. Login response
+ * These headers arrive unprocessed by the EP firmware and iSCSI layer
+ * process them
+ */
+static unsigned int
+beiscsi_process_async_pdu(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_hba *phba,
+ unsigned short cid,
+ struct pdu_base *ppdu,
+ unsigned long pdu_len,
+ void *pbuffer, unsigned long buf_len)
+{
+ struct iscsi_conn *conn = beiscsi_conn->conn;
+ struct iscsi_session *session = conn->session;
+
+ switch (ppdu->dw[offsetof(struct amap_pdu_base, opcode) / 32] &
+ PDUBASE_OPCODE_MASK) {
+ case ISCSI_OP_NOOP_IN:
+ pbuffer = NULL;
+ buf_len = 0;
+ break;
+ case ISCSI_OP_ASYNC_EVENT:
+ break;
+ case ISCSI_OP_REJECT:
+ WARN_ON(!pbuffer);
+ WARN_ON(!(buf_len == 48));
+ SE_DEBUG(DBG_LVL_1, "In ISCSI_OP_REJECT\n");
+ break;
+ case ISCSI_OP_LOGIN_RSP:
+ break;
+ default:
+ shost_printk(KERN_WARNING, phba->shost,
+ "Unrecognized opcode 0x%x in async msg \n",
+ (ppdu->
+ dw[offsetof(struct amap_pdu_base, opcode) / 32]
+ & PDUBASE_OPCODE_MASK));
+ return 1;
+ }
+
+ spin_lock_bh(&session->lock);
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)ppdu, pbuffer, buf_len);
+ spin_unlock_bh(&session->lock);
+ return 0;
+}
+
+static struct sgl_handle *alloc_io_sgl_handle(struct beiscsi_hba *phba)
+{
+ struct sgl_handle *psgl_handle;
+
+ if (phba->io_sgl_hndl_avbl) {
+ SE_DEBUG(DBG_LVL_8,
+ "In alloc_io_sgl_handle,io_sgl_alloc_index=%d \n",
+ phba->io_sgl_alloc_index);
+ psgl_handle = phba->io_sgl_hndl_base[phba->
+ io_sgl_alloc_index];
+ phba->io_sgl_hndl_base[phba->io_sgl_alloc_index] = NULL;
+ phba->io_sgl_hndl_avbl--;
+ if (phba->io_sgl_alloc_index == (phba->params.ios_per_ctrl - 1))
+ phba->io_sgl_alloc_index = 0;
+ else
+ phba->io_sgl_alloc_index++;
+ } else
+ psgl_handle = NULL;
+ return psgl_handle;
+}
+
+static void
+free_io_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle)
+{
+ SE_DEBUG(DBG_LVL_8, "In free_,io_sgl_free_index=%d \n",
+ phba->io_sgl_free_index);
+ if (phba->io_sgl_hndl_base[phba->io_sgl_free_index]) {
+ /*
+ * this can happen if clean_task is called on a task that
+ * failed in xmit_task or alloc_pdu.
+ */
+ SE_DEBUG(DBG_LVL_8,
+ "Double Free in IO SGL io_sgl_free_index=%d,"
+ "value there=%p \n", phba->io_sgl_free_index,
+ phba->io_sgl_hndl_base[phba->io_sgl_free_index]);
+ return;
+ }
+ phba->io_sgl_hndl_base[phba->io_sgl_free_index] = psgl_handle;
+ phba->io_sgl_hndl_avbl++;
+ if (phba->io_sgl_free_index == (phba->params.ios_per_ctrl - 1))
+ phba->io_sgl_free_index = 0;
+ else
+ phba->io_sgl_free_index++;
+}
+
+/**
+ * alloc_wrb_handle - To allocate a wrb handle
+ * @phba: The hba pointer
+ * @cid: The cid to use for allocation
+ * @index: index allocation and wrb index
+ *
+ * This happens under session_lock until submission to chip
+ */
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
+ int index)
+{
+ struct hwi_wrb_context *pwrb_context;
+ struct hwi_controller *phwi_ctrlr;
+ struct wrb_handle *pwrb_handle;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pwrb_context = &phwi_ctrlr->wrb_context[cid];
+ pwrb_handle = pwrb_context->pwrb_handle_base[index];
+ pwrb_handle->wrb_index = index;
+ pwrb_handle->nxt_wrb_index = index;
+ return pwrb_handle;
+}
+
+/**
+ * free_wrb_handle - To free the wrb handle back to pool
+ * @phba: The hba pointer
+ * @pwrb_context: The context to free from
+ * @pwrb_handle: The wrb_handle to free
+ *
+ * This happens under session_lock until submission to chip
+ */
+static void
+free_wrb_handle(struct beiscsi_hba *phba, struct hwi_wrb_context *pwrb_context,
+ struct wrb_handle *pwrb_handle)
+{
+ SE_DEBUG(DBG_LVL_8,
+ "FREE WRB: pwrb_handle=%p free_index=%d=0x%x"
+ "wrb_handles_available=%d \n",
+ pwrb_handle, pwrb_context->free_index,
+ pwrb_context->free_index, pwrb_context->wrb_handles_available);
+}
+
+static struct sgl_handle *alloc_mgmt_sgl_handle(struct beiscsi_hba *phba)
+{
+ struct sgl_handle *psgl_handle;
+
+ if (phba->eh_sgl_hndl_avbl) {
+ psgl_handle = phba->eh_sgl_hndl_base[phba->eh_sgl_alloc_index];
+ phba->eh_sgl_hndl_base[phba->eh_sgl_alloc_index] = NULL;
+ SE_DEBUG(DBG_LVL_8, "mgmt_sgl_alloc_index=%d=0x%x \n",
+ phba->eh_sgl_alloc_index, phba->eh_sgl_alloc_index);
+ phba->eh_sgl_hndl_avbl--;
+ if (phba->eh_sgl_alloc_index ==
+ (phba->params.icds_per_ctrl - phba->params.ios_per_ctrl -
+ 1))
+ phba->eh_sgl_alloc_index = 0;
+ else
+ phba->eh_sgl_alloc_index++;
+ } else
+ psgl_handle = NULL;
+ return psgl_handle;
+}
+
+void
+free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle)
+{
+
+ if (phba->eh_sgl_hndl_base[phba->eh_sgl_free_index]) {
+ /*
+ * this can happen if clean_task is called on a task that
+ * failed in xmit_task or alloc_pdu.
+ */
+ SE_DEBUG(DBG_LVL_8,
+ "Double Free in eh SGL ,eh_sgl_free_index=%d \n",
+ phba->eh_sgl_free_index);
+ return;
+ }
+ phba->eh_sgl_hndl_base[phba->eh_sgl_free_index] = psgl_handle;
+ phba->eh_sgl_hndl_avbl++;
+ if (phba->eh_sgl_free_index ==
+ (phba->params.icds_per_ctrl - phba->params.ios_per_ctrl - 1))
+ phba->eh_sgl_free_index = 0;
+ else
+ phba->eh_sgl_free_index++;
+}
+
+static void
+be_complete_io(struct beiscsi_conn *beiscsi_conn,
+ struct iscsi_task *task, struct sol_cqe *psol)
+{
+ struct beiscsi_io_task *io_task = task->dd_data;
+ struct be_status_bhs *sts_bhs =
+ (struct be_status_bhs *)io_task->cmd_bhs;
+ struct iscsi_conn *conn = beiscsi_conn->conn;
+ unsigned int sense_len;
+ unsigned char *sense;
+ u32 resid = 0, exp_cmdsn, max_cmdsn;
+ u8 rsp, status, flags;
+
+ exp_cmdsn = be32_to_cpu(psol->
+ dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
+ & SOL_EXP_CMD_SN_MASK);
+ max_cmdsn = be32_to_cpu((psol->
+ dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
+ & SOL_EXP_CMD_SN_MASK) +
+ ((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
+ / 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+ rsp = ((psol->dw[offsetof(struct amap_sol_cqe, i_resp) / 32]
+ & SOL_RESP_MASK) >> 16);
+ status = ((psol->dw[offsetof(struct amap_sol_cqe, i_sts) / 32]
+ & SOL_STS_MASK) >> 8);
+ flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
+ & SOL_FLAGS_MASK) >> 24) | 0x80;
+
+ task->sc->result = (DID_OK << 16) | status;
+ if (rsp != ISCSI_STATUS_CMD_COMPLETED) {
+ task->sc->result = DID_ERROR << 16;
+ goto unmap;
+ }
+
+ /* bidi not initially supported */
+ if (flags & (ISCSI_FLAG_CMD_UNDERFLOW | ISCSI_FLAG_CMD_OVERFLOW)) {
+ resid = (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) /
+ 32] & SOL_RES_CNT_MASK);
+
+ if (!status && (flags & ISCSI_FLAG_CMD_OVERFLOW))
+ task->sc->result = DID_ERROR << 16;
+
+ if (flags & ISCSI_FLAG_CMD_UNDERFLOW) {
+ scsi_set_resid(task->sc, resid);
+ if (!status && (scsi_bufflen(task->sc) - resid <
+ task->sc->underflow))
+ task->sc->result = DID_ERROR << 16;
+ }
+ }
+
+ if (status == SAM_STAT_CHECK_CONDITION) {
+ sense = sts_bhs->sense_info + sizeof(unsigned short);
+ sense_len =
+ cpu_to_be16((unsigned short)(sts_bhs->sense_info[0]));
+ memcpy(task->sc->sense_buffer, sense,
+ min_t(u16, sense_len, SCSI_SENSE_BUFFERSIZE));
+ }
+ if (io_task->cmd_bhs->iscsi_hdr.flags & ISCSI_FLAG_CMD_READ) {
+ if (psol->dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
+ & SOL_RES_CNT_MASK)
+ conn->rxdata_octets += (psol->
+ dw[offsetof(struct amap_sol_cqe, i_res_cnt) / 32]
+ & SOL_RES_CNT_MASK);
+ }
+unmap:
+ scsi_dma_unmap(io_task->scsi_cmnd);
+ iscsi_complete_scsi_task(task, exp_cmdsn, max_cmdsn);
+}
+
+static void
+be_complete_logout(struct beiscsi_conn *beiscsi_conn,
+ struct iscsi_task *task, struct sol_cqe *psol)
+{
+ struct iscsi_logout_rsp *hdr;
+ struct iscsi_conn *conn = beiscsi_conn->conn;
+
+ hdr = (struct iscsi_logout_rsp *)task->hdr;
+ hdr->t2wait = 5;
+ hdr->t2retain = 0;
+ hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
+ & SOL_FLAGS_MASK) >> 24) | 0x80;
+ hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) /
+ 32] & SOL_RESP_MASK);
+ hdr->exp_cmdsn = cpu_to_be32(psol->
+ dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
+ & SOL_EXP_CMD_SN_MASK);
+ hdr->max_cmdsn = be32_to_cpu((psol->
+ dw[offsetof(struct amap_sol_cqe, i_exp_cmd_sn) / 32]
+ & SOL_EXP_CMD_SN_MASK) +
+ ((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
+ / 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+ hdr->hlength = 0;
+
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+}
+
+static void
+be_complete_tmf(struct beiscsi_conn *beiscsi_conn,
+ struct iscsi_task *task, struct sol_cqe *psol)
+{
+ struct iscsi_tm_rsp *hdr;
+ struct iscsi_conn *conn = beiscsi_conn->conn;
+
+ hdr = (struct iscsi_tm_rsp *)task->hdr;
+ hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
+ & SOL_FLAGS_MASK) >> 24) | 0x80;
+ hdr->response = (psol->dw[offsetof(struct amap_sol_cqe, i_resp) /
+ 32] & SOL_RESP_MASK);
+ hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe,
+ i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK);
+ hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe,
+ i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) +
+ ((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
+ / 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+}
+
+static void
+hwi_complete_drvr_msgs(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_hba *phba, struct sol_cqe *psol)
+{
+ struct hwi_wrb_context *pwrb_context;
+ struct wrb_handle *pwrb_handle;
+ struct hwi_controller *phwi_ctrlr;
+ struct iscsi_conn *conn = beiscsi_conn->conn;
+ struct iscsi_session *session = conn->session;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pwrb_context = &phwi_ctrlr->wrb_context[((psol->
+ dw[offsetof(struct amap_sol_cqe, cid) / 32] &
+ SOL_CID_MASK) >> 6)];
+ pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
+ dw[offsetof(struct amap_sol_cqe, wrb_index) /
+ 32] & SOL_WRB_INDEX_MASK) >> 16)];
+ spin_lock_bh(&session->lock);
+ free_wrb_handle(phba, pwrb_context, pwrb_handle);
+ spin_unlock_bh(&session->lock);
+}
+
+static void
+be_complete_nopin_resp(struct beiscsi_conn *beiscsi_conn,
+ struct iscsi_task *task, struct sol_cqe *psol)
+{
+ struct iscsi_nopin *hdr;
+ struct iscsi_conn *conn = beiscsi_conn->conn;
+
+ hdr = (struct iscsi_nopin *)task->hdr;
+ hdr->flags = ((psol->dw[offsetof(struct amap_sol_cqe, i_flags) / 32]
+ & SOL_FLAGS_MASK) >> 24) | 0x80;
+ hdr->exp_cmdsn = cpu_to_be32(psol->dw[offsetof(struct amap_sol_cqe,
+ i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK);
+ hdr->max_cmdsn = be32_to_cpu((psol->dw[offsetof(struct amap_sol_cqe,
+ i_exp_cmd_sn) / 32] & SOL_EXP_CMD_SN_MASK) +
+ ((psol->dw[offsetof(struct amap_sol_cqe, i_cmd_wnd)
+ / 32] & SOL_CMD_WND_MASK) >> 24) - 1);
+ hdr->opcode = ISCSI_OP_NOOP_IN;
+ __iscsi_complete_pdu(conn, (struct iscsi_hdr *)hdr, NULL, 0);
+}
+
+static void hwi_complete_cmd(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_hba *phba, struct sol_cqe *psol)
+{
+ struct hwi_wrb_context *pwrb_context;
+ struct wrb_handle *pwrb_handle;
+ struct iscsi_wrb *pwrb = NULL;
+ struct hwi_controller *phwi_ctrlr;
+ struct iscsi_task *task;
+ struct beiscsi_io_task *io_task;
+ struct iscsi_conn *conn = beiscsi_conn->conn;
+ struct iscsi_session *session = conn->session;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+
+ pwrb_context = &phwi_ctrlr->
+ wrb_context[((psol->dw[offsetof(struct amap_sol_cqe, cid) / 32]
+ & SOL_CID_MASK) >> 6)];
+ pwrb_handle = pwrb_context->pwrb_handle_basestd[((psol->
+ dw[offsetof(struct amap_sol_cqe, wrb_index) /
+ 32] & SOL_WRB_INDEX_MASK) >> 16)];
+
+ task = pwrb_handle->pio_handle;
+ io_task = task->dd_data;
+ spin_lock_bh(&session->lock);
+ pwrb = pwrb_handle->pwrb;
+ switch ((pwrb->dw[offsetof(struct amap_iscsi_wrb, type) / 32] &
+ WRB_TYPE_MASK) >> 28) {
+ case HWH_TYPE_IO:
+ case HWH_TYPE_IO_RD:
+ if ((task->hdr->opcode & ISCSI_OPCODE_MASK) ==
+ ISCSI_OP_NOOP_OUT) {
+ be_complete_nopin_resp(beiscsi_conn, task, psol);
+ } else
+ be_complete_io(beiscsi_conn, task, psol);
+ break;
+
+ case HWH_TYPE_LOGOUT:
+ be_complete_logout(beiscsi_conn, task, psol);
+ break;
+
+ case HWH_TYPE_LOGIN:
+ SE_DEBUG(DBG_LVL_1,
+ "\t\t No HWH_TYPE_LOGIN Expected in hwi_complete_cmd"
+ "- Solicited path \n");
+ break;
+
+ case HWH_TYPE_TMF:
+ be_complete_tmf(beiscsi_conn, task, psol);
+ break;
+
+ case HWH_TYPE_NOP:
+ be_complete_nopin_resp(beiscsi_conn, task, psol);
+ break;
+
+ default:
+ shost_printk(KERN_WARNING, phba->shost,
+ "wrb_index 0x%x CID 0x%x\n",
+ ((psol->dw[offsetof(struct amap_iscsi_wrb, type) /
+ 32] & SOL_WRB_INDEX_MASK) >> 16),
+ ((psol->dw[offsetof(struct amap_sol_cqe, cid) / 32]
+ & SOL_CID_MASK) >> 6));
+ break;
+ }
+
+ spin_unlock_bh(&session->lock);
+}
+
+static struct list_head *hwi_get_async_busy_list(struct hwi_async_pdu_context
+ *pasync_ctx, unsigned int is_header,
+ unsigned int host_write_ptr)
+{
+ if (is_header)
+ return &pasync_ctx->async_entry[host_write_ptr].
+ header_busy_list;
+ else
+ return &pasync_ctx->async_entry[host_write_ptr].data_busy_list;
+}
+
+static struct async_pdu_handle *
+hwi_get_async_handle(struct beiscsi_hba *phba,
+ struct beiscsi_conn *beiscsi_conn,
+ struct hwi_async_pdu_context *pasync_ctx,
+ struct i_t_dpdu_cqe *pdpdu_cqe, unsigned int *pcq_index)
+{
+ struct be_bus_address phys_addr;
+ struct list_head *pbusy_list;
+ struct async_pdu_handle *pasync_handle = NULL;
+ int buffer_len = 0;
+ unsigned char buffer_index = -1;
+ unsigned char is_header = 0;
+
+ phys_addr.u.a32.address_lo =
+ pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, db_addr_lo) / 32] -
+ ((pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32]
+ & PDUCQE_DPL_MASK) >> 16);
+ phys_addr.u.a32.address_hi =
+ pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, db_addr_hi) / 32];
+
+ phys_addr.u.a64.address =
+ *((unsigned long long *)(&phys_addr.u.a64.address));
+
+ switch (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe, code) / 32]
+ & PDUCQE_CODE_MASK) {
+ case UNSOL_HDR_NOTIFY:
+ is_header = 1;
+
+ pbusy_list = hwi_get_async_busy_list(pasync_ctx, 1,
+ (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
+ index) / 32] & PDUCQE_INDEX_MASK));
+
+ buffer_len = (unsigned int)(phys_addr.u.a64.address -
+ pasync_ctx->async_header.pa_base.u.a64.address);
+
+ buffer_index = buffer_len /
+ pasync_ctx->async_header.buffer_size;
+
+ break;
+ case UNSOL_DATA_NOTIFY:
+ pbusy_list = hwi_get_async_busy_list(pasync_ctx, 0, (pdpdu_cqe->
+ dw[offsetof(struct amap_i_t_dpdu_cqe,
+ index) / 32] & PDUCQE_INDEX_MASK));
+ buffer_len = (unsigned long)(phys_addr.u.a64.address -
+ pasync_ctx->async_data.pa_base.u.
+ a64.address);
+ buffer_index = buffer_len / pasync_ctx->async_data.buffer_size;
+ break;
+ default:
+ pbusy_list = NULL;
+ shost_printk(KERN_WARNING, phba->shost,
+ "Unexpected code=%d \n",
+ pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
+ code) / 32] & PDUCQE_CODE_MASK);
+ return NULL;
+ }
+
+ WARN_ON(!(buffer_index <= pasync_ctx->async_data.num_entries));
+ WARN_ON(list_empty(pbusy_list));
+ list_for_each_entry(pasync_handle, pbusy_list, link) {
+ WARN_ON(pasync_handle->consumed);
+ if (pasync_handle->index == buffer_index)
+ break;
+ }
+
+ WARN_ON(!pasync_handle);
+
+ pasync_handle->cri = (unsigned short)beiscsi_conn->beiscsi_conn_cid;
+ pasync_handle->is_header = is_header;
+ pasync_handle->buffer_len = ((pdpdu_cqe->
+ dw[offsetof(struct amap_i_t_dpdu_cqe, dpl) / 32]
+ & PDUCQE_DPL_MASK) >> 16);
+
+ *pcq_index = (pdpdu_cqe->dw[offsetof(struct amap_i_t_dpdu_cqe,
+ index) / 32] & PDUCQE_INDEX_MASK);
+ return pasync_handle;
+}
+
+static unsigned int
+hwi_update_async_writables(struct hwi_async_pdu_context *pasync_ctx,
+ unsigned int is_header, unsigned int cq_index)
+{
+ struct list_head *pbusy_list;
+ struct async_pdu_handle *pasync_handle;
+ unsigned int num_entries, writables = 0;
+ unsigned int *pep_read_ptr, *pwritables;
+
+
+ if (is_header) {
+ pep_read_ptr = &pasync_ctx->async_header.ep_read_ptr;
+ pwritables = &pasync_ctx->async_header.writables;
+ num_entries = pasync_ctx->async_header.num_entries;
+ } else {
+ pep_read_ptr = &pasync_ctx->async_data.ep_read_ptr;
+ pwritables = &pasync_ctx->async_data.writables;
+ num_entries = pasync_ctx->async_data.num_entries;
+ }
+
+ while ((*pep_read_ptr) != cq_index) {
+ (*pep_read_ptr)++;
+ *pep_read_ptr = (*pep_read_ptr) % num_entries;
+
+ pbusy_list = hwi_get_async_busy_list(pasync_ctx, is_header,
+ *pep_read_ptr);
+ if (writables == 0)
+ WARN_ON(list_empty(pbusy_list));
+
+ if (!list_empty(pbusy_list)) {
+ pasync_handle = list_entry(pbusy_list->next,
+ struct async_pdu_handle,
+ link);
+ WARN_ON(!pasync_handle);
+ pasync_handle->consumed = 1;
+ }
+
+ writables++;
+ }
+
+ if (!writables) {
+ SE_DEBUG(DBG_LVL_1,
+ "Duplicate notification received - index 0x%x!!\n",
+ cq_index);
+ WARN_ON(1);
+ }
+
+ *pwritables = *pwritables + writables;
+ return 0;
+}
+
+static unsigned int hwi_free_async_msg(struct beiscsi_hba *phba,
+ unsigned int cri)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_async_pdu_context *pasync_ctx;
+ struct async_pdu_handle *pasync_handle, *tmp_handle;
+ struct list_head *plist;
+ unsigned int i = 0;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+
+ plist = &pasync_ctx->async_entry[cri].wait_queue.list;
+
+ list_for_each_entry_safe(pasync_handle, tmp_handle, plist, link) {
+ list_del(&pasync_handle->link);
+
+ if (i == 0) {
+ list_add_tail(&pasync_handle->link,
+ &pasync_ctx->async_header.free_list);
+ pasync_ctx->async_header.free_entries++;
+ i++;
+ } else {
+ list_add_tail(&pasync_handle->link,
+ &pasync_ctx->async_data.free_list);
+ pasync_ctx->async_data.free_entries++;
+ i++;
+ }
+ }
+
+ INIT_LIST_HEAD(&pasync_ctx->async_entry[cri].wait_queue.list);
+ pasync_ctx->async_entry[cri].wait_queue.hdr_received = 0;
+ pasync_ctx->async_entry[cri].wait_queue.bytes_received = 0;
+ return 0;
+}
+
+static struct phys_addr *
+hwi_get_ring_address(struct hwi_async_pdu_context *pasync_ctx,
+ unsigned int is_header, unsigned int host_write_ptr)
+{
+ struct phys_addr *pasync_sge = NULL;
+
+ if (is_header)
+ pasync_sge = pasync_ctx->async_header.ring_base;
+ else
+ pasync_sge = pasync_ctx->async_data.ring_base;
+
+ return pasync_sge + host_write_ptr;
+}
+
+static void hwi_post_async_buffers(struct beiscsi_hba *phba,
+ unsigned int is_header)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_async_pdu_context *pasync_ctx;
+ struct async_pdu_handle *pasync_handle;
+ struct list_head *pfree_link, *pbusy_list;
+ struct phys_addr *pasync_sge;
+ unsigned int ring_id, num_entries;
+ unsigned int host_write_num;
+ unsigned int writables;
+ unsigned int i = 0;
+ u32 doorbell = 0;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+
+ if (is_header) {
+ num_entries = pasync_ctx->async_header.num_entries;
+ writables = min(pasync_ctx->async_header.writables,
+ pasync_ctx->async_header.free_entries);
+ pfree_link = pasync_ctx->async_header.free_list.next;
+ host_write_num = pasync_ctx->async_header.host_write_ptr;
+ ring_id = phwi_ctrlr->default_pdu_hdr.id;
+ } else {
+ num_entries = pasync_ctx->async_data.num_entries;
+ writables = min(pasync_ctx->async_data.writables,
+ pasync_ctx->async_data.free_entries);
+ pfree_link = pasync_ctx->async_data.free_list.next;
+ host_write_num = pasync_ctx->async_data.host_write_ptr;
+ ring_id = phwi_ctrlr->default_pdu_data.id;
+ }
+
+ writables = (writables / 8) * 8;
+ if (writables) {
+ for (i = 0; i < writables; i++) {
+ pbusy_list =
+ hwi_get_async_busy_list(pasync_ctx, is_header,
+ host_write_num);
+ pasync_handle =
+ list_entry(pfree_link, struct async_pdu_handle,
+ link);
+ WARN_ON(!pasync_handle);
+ pasync_handle->consumed = 0;
+
+ pfree_link = pfree_link->next;
+
+ pasync_sge = hwi_get_ring_address(pasync_ctx,
+ is_header, host_write_num);
+
+ pasync_sge->hi = pasync_handle->pa.u.a32.address_lo;
+ pasync_sge->lo = pasync_handle->pa.u.a32.address_hi;
+
+ list_move(&pasync_handle->link, pbusy_list);
+
+ host_write_num++;
+ host_write_num = host_write_num % num_entries;
+ }
+
+ if (is_header) {
+ pasync_ctx->async_header.host_write_ptr =
+ host_write_num;
+ pasync_ctx->async_header.free_entries -= writables;
+ pasync_ctx->async_header.writables -= writables;
+ pasync_ctx->async_header.busy_entries += writables;
+ } else {
+ pasync_ctx->async_data.host_write_ptr = host_write_num;
+ pasync_ctx->async_data.free_entries -= writables;
+ pasync_ctx->async_data.writables -= writables;
+ pasync_ctx->async_data.busy_entries += writables;
+ }
+
+ doorbell |= ring_id & DB_DEF_PDU_RING_ID_MASK;
+ doorbell |= 1 << DB_DEF_PDU_REARM_SHIFT;
+ doorbell |= 0 << DB_DEF_PDU_EVENT_SHIFT;
+ doorbell |= (writables & DB_DEF_PDU_CQPROC_MASK)
+ << DB_DEF_PDU_CQPROC_SHIFT;
+
+ iowrite32(doorbell, phba->db_va + DB_RXULP0_OFFSET);
+ }
+}
+
+static void hwi_flush_default_pdu_buffer(struct beiscsi_hba *phba,
+ struct beiscsi_conn *beiscsi_conn,
+ struct i_t_dpdu_cqe *pdpdu_cqe)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_async_pdu_context *pasync_ctx;
+ struct async_pdu_handle *pasync_handle = NULL;
+ unsigned int cq_index = -1;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+
+ pasync_handle = hwi_get_async_handle(phba, beiscsi_conn, pasync_ctx,
+ pdpdu_cqe, &cq_index);
+ BUG_ON(pasync_handle->is_header != 0);
+ if (pasync_handle->consumed == 0)
+ hwi_update_async_writables(pasync_ctx, pasync_handle->is_header,
+ cq_index);
+
+ hwi_free_async_msg(phba, pasync_handle->cri);
+ hwi_post_async_buffers(phba, pasync_handle->is_header);
+}
+
+static unsigned int
+hwi_fwd_async_msg(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_hba *phba,
+ struct hwi_async_pdu_context *pasync_ctx, unsigned short cri)
+{
+ struct list_head *plist;
+ struct async_pdu_handle *pasync_handle;
+ void *phdr = NULL;
+ unsigned int hdr_len = 0, buf_len = 0;
+ unsigned int status, index = 0, offset = 0;
+ void *pfirst_buffer = NULL;
+ unsigned int num_buf = 0;
+
+ plist = &pasync_ctx->async_entry[cri].wait_queue.list;
+
+ list_for_each_entry(pasync_handle, plist, link) {
+ if (index == 0) {
+ phdr = pasync_handle->pbuffer;
+ hdr_len = pasync_handle->buffer_len;
+ } else {
+ buf_len = pasync_handle->buffer_len;
+ if (!num_buf) {
+ pfirst_buffer = pasync_handle->pbuffer;
+ num_buf++;
+ }
+ memcpy(pfirst_buffer + offset,
+ pasync_handle->pbuffer, buf_len);
+ offset = buf_len;
+ }
+ index++;
+ }
+
+ status = beiscsi_process_async_pdu(beiscsi_conn, phba,
+ beiscsi_conn->beiscsi_conn_cid,
+ phdr, hdr_len, pfirst_buffer,
+ buf_len);
+
+ if (status == 0)
+ hwi_free_async_msg(phba, cri);
+ return 0;
+}
+
+static unsigned int
+hwi_gather_async_pdu(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_hba *phba,
+ struct async_pdu_handle *pasync_handle)
+{
+ struct hwi_async_pdu_context *pasync_ctx;
+ struct hwi_controller *phwi_ctrlr;
+ unsigned int bytes_needed = 0, status = 0;
+ unsigned short cri = pasync_handle->cri;
+ struct pdu_base *ppdu;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+
+ list_del(&pasync_handle->link);
+ if (pasync_handle->is_header) {
+ pasync_ctx->async_header.busy_entries--;
+ if (pasync_ctx->async_entry[cri].wait_queue.hdr_received) {
+ hwi_free_async_msg(phba, cri);
+ BUG();
+ }
+
+ pasync_ctx->async_entry[cri].wait_queue.bytes_received = 0;
+ pasync_ctx->async_entry[cri].wait_queue.hdr_received = 1;
+ pasync_ctx->async_entry[cri].wait_queue.hdr_len =
+ (unsigned short)pasync_handle->buffer_len;
+ list_add_tail(&pasync_handle->link,
+ &pasync_ctx->async_entry[cri].wait_queue.list);
+
+ ppdu = pasync_handle->pbuffer;
+ bytes_needed = ((((ppdu->dw[offsetof(struct amap_pdu_base,
+ data_len_hi) / 32] & PDUBASE_DATALENHI_MASK) << 8) &
+ 0xFFFF0000) | ((be16_to_cpu((ppdu->
+ dw[offsetof(struct amap_pdu_base, data_len_lo) / 32]
+ & PDUBASE_DATALENLO_MASK) >> 16)) & 0x0000FFFF));
+
+ if (status == 0) {
+ pasync_ctx->async_entry[cri].wait_queue.bytes_needed =
+ bytes_needed;
+
+ if (bytes_needed == 0)
+ status = hwi_fwd_async_msg(beiscsi_conn, phba,
+ pasync_ctx, cri);
+ }
+ } else {
+ pasync_ctx->async_data.busy_entries--;
+ if (pasync_ctx->async_entry[cri].wait_queue.hdr_received) {
+ list_add_tail(&pasync_handle->link,
+ &pasync_ctx->async_entry[cri].wait_queue.
+ list);
+ pasync_ctx->async_entry[cri].wait_queue.
+ bytes_received +=
+ (unsigned short)pasync_handle->buffer_len;
+
+ if (pasync_ctx->async_entry[cri].wait_queue.
+ bytes_received >=
+ pasync_ctx->async_entry[cri].wait_queue.
+ bytes_needed)
+ status = hwi_fwd_async_msg(beiscsi_conn, phba,
+ pasync_ctx, cri);
+ }
+ }
+ return status;
+}
+
+static void hwi_process_default_pdu_ring(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_hba *phba,
+ struct i_t_dpdu_cqe *pdpdu_cqe)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_async_pdu_context *pasync_ctx;
+ struct async_pdu_handle *pasync_handle = NULL;
+ unsigned int cq_index = -1;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pasync_ctx = HWI_GET_ASYNC_PDU_CTX(phwi_ctrlr);
+ pasync_handle = hwi_get_async_handle(phba, beiscsi_conn, pasync_ctx,
+ pdpdu_cqe, &cq_index);
+
+ if (pasync_handle->consumed == 0)
+ hwi_update_async_writables(pasync_ctx, pasync_handle->is_header,
+ cq_index);
+ hwi_gather_async_pdu(beiscsi_conn, phba, pasync_handle);
+ hwi_post_async_buffers(phba, pasync_handle->is_header);
+}
+
+static unsigned int beiscsi_process_cq(struct beiscsi_hba *phba)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ struct be_queue_info *cq;
+ struct sol_cqe *sol;
+ struct dmsg_cqe *dmsg;
+ unsigned int num_processed = 0;
+ unsigned int tot_nump = 0;
+ struct beiscsi_conn *beiscsi_conn;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+ cq = &phwi_context->be_cq;
+ sol = queue_tail_node(cq);
+
+ while (sol->dw[offsetof(struct amap_sol_cqe, valid) / 32] &
+ CQE_VALID_MASK) {
+ be_dws_le_to_cpu(sol, sizeof(struct sol_cqe));
+
+ beiscsi_conn = phba->conn_table[(u32) (sol->
+ dw[offsetof(struct amap_sol_cqe, cid) / 32] &
+ SOL_CID_MASK) >> 6];
+
+ if (!beiscsi_conn || !beiscsi_conn->ep) {
+ shost_printk(KERN_WARNING, phba->shost,
+ "Connection table empty for cid = %d\n",
+ (u32)(sol->dw[offsetof(struct amap_sol_cqe,
+ cid) / 32] & SOL_CID_MASK) >> 6);
+ return 0;
+ }
+
+ if (num_processed >= 32) {
+ hwi_ring_cq_db(phba, phwi_context->be_cq.id,
+ num_processed, 0, 0);
+ tot_nump += num_processed;
+ num_processed = 0;
+ }
+
+ switch ((u32) sol->dw[offsetof(struct amap_sol_cqe, code) /
+ 32] & CQE_CODE_MASK) {
+ case SOL_CMD_COMPLETE:
+ hwi_complete_cmd(beiscsi_conn, phba, sol);
+ break;
+ case DRIVERMSG_NOTIFY:
+ SE_DEBUG(DBG_LVL_8, "Received DRIVERMSG_NOTIFY \n");
+ dmsg = (struct dmsg_cqe *)sol;
+ hwi_complete_drvr_msgs(beiscsi_conn, phba, sol);
+ break;
+ case UNSOL_HDR_NOTIFY:
+ case UNSOL_DATA_NOTIFY:
+ SE_DEBUG(DBG_LVL_8, "Received UNSOL_HDR/DATA_NOTIFY\n");
+ hwi_process_default_pdu_ring(beiscsi_conn, phba,
+ (struct i_t_dpdu_cqe *)sol);
+ break;
+ case CXN_INVALIDATE_INDEX_NOTIFY:
+ case CMD_INVALIDATED_NOTIFY:
+ case CXN_INVALIDATE_NOTIFY:
+ SE_DEBUG(DBG_LVL_1,
+ "Ignoring CQ Error notification for cmd/cxn"
+ "invalidate\n");
+ break;
+ case SOL_CMD_KILLED_DATA_DIGEST_ERR:
+ case CMD_KILLED_INVALID_STATSN_RCVD:
+ case CMD_KILLED_INVALID_R2T_RCVD:
+ case CMD_CXN_KILLED_LUN_INVALID:
+ case CMD_CXN_KILLED_ICD_INVALID:
+ case CMD_CXN_KILLED_ITT_INVALID:
+ case CMD_CXN_KILLED_SEQ_OUTOFORDER:
+ case CMD_CXN_KILLED_INVALID_DATASN_RCVD:
+ SE_DEBUG(DBG_LVL_1,
+ "CQ Error notification for cmd.. "
+ "code %d cid 0x%x\n",
+ sol->dw[offsetof(struct amap_sol_cqe, code) /
+ 32] & CQE_CODE_MASK,
+ (sol->dw[offsetof(struct amap_sol_cqe, cid) /
+ 32] & SOL_CID_MASK));
+ break;
+ case UNSOL_DATA_DIGEST_ERROR_NOTIFY:
+ SE_DEBUG(DBG_LVL_1,
+ "Digest error on def pdu ring, dropping..\n");
+ hwi_flush_default_pdu_buffer(phba, beiscsi_conn,
+ (struct i_t_dpdu_cqe *) sol);
+ break;
+ case CXN_KILLED_PDU_SIZE_EXCEEDS_DSL:
+ case CXN_KILLED_BURST_LEN_MISMATCH:
+ case CXN_KILLED_AHS_RCVD:
+ case CXN_KILLED_HDR_DIGEST_ERR:
+ case CXN_KILLED_UNKNOWN_HDR:
+ case CXN_KILLED_STALE_ITT_TTT_RCVD:
+ case CXN_KILLED_INVALID_ITT_TTT_RCVD:
+ case CXN_KILLED_TIMED_OUT:
+ case CXN_KILLED_FIN_RCVD:
+ case CXN_KILLED_BAD_UNSOL_PDU_RCVD:
+ case CXN_KILLED_BAD_WRB_INDEX_ERROR:
+ case CXN_KILLED_OVER_RUN_RESIDUAL:
+ case CXN_KILLED_UNDER_RUN_RESIDUAL:
+ case CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN:
+ SE_DEBUG(DBG_LVL_1, "CQ Error %d, resetting CID "
+ "0x%x...\n",
+ sol->dw[offsetof(struct amap_sol_cqe, code) /
+ 32] & CQE_CODE_MASK,
+ sol->dw[offsetof(struct amap_sol_cqe, cid) /
+ 32] & CQE_CID_MASK);
+ iscsi_conn_failure(beiscsi_conn->conn,
+ ISCSI_ERR_CONN_FAILED);
+ break;
+ case CXN_KILLED_RST_SENT:
+ case CXN_KILLED_RST_RCVD:
+ SE_DEBUG(DBG_LVL_1, "CQ Error %d, reset received/sent "
+ "on CID 0x%x...\n",
+ sol->dw[offsetof(struct amap_sol_cqe, code) /
+ 32] & CQE_CODE_MASK,
+ sol->dw[offsetof(struct amap_sol_cqe, cid) /
+ 32] & CQE_CID_MASK);
+ iscsi_conn_failure(beiscsi_conn->conn,
+ ISCSI_ERR_CONN_FAILED);
+ break;
+ default:
+ SE_DEBUG(DBG_LVL_1, "CQ Error Invalid code= %d "
+ "received on CID 0x%x...\n",
+ sol->dw[offsetof(struct amap_sol_cqe, code) /
+ 32] & CQE_CODE_MASK,
+ sol->dw[offsetof(struct amap_sol_cqe, cid) /
+ 32] & CQE_CID_MASK);
+ break;
+ }
+
+ AMAP_SET_BITS(struct amap_sol_cqe, valid, sol, 0);
+ queue_tail_inc(cq);
+ sol = queue_tail_node(cq);
+ num_processed++;
+ }
+
+ if (num_processed > 0) {
+ tot_nump += num_processed;
+ hwi_ring_cq_db(phba, phwi_context->be_cq.id, num_processed,
+ 1, 0);
+ }
+ return tot_nump;
+}
+
+static void beiscsi_process_all_cqs(struct work_struct *work)
+{
+ unsigned long flags;
+ struct beiscsi_hba *phba =
+ container_of(work, struct beiscsi_hba, work_cqs);
+
+ if (phba->todo_mcc_cq) {
+ spin_lock_irqsave(&phba->isr_lock, flags);
+ phba->todo_mcc_cq = 0;
+ spin_unlock_irqrestore(&phba->isr_lock, flags);
+ SE_DEBUG(DBG_LVL_1, "MCC Interrupt Not expected \n");
+ }
+
+ if (phba->todo_cq) {
+ spin_lock_irqsave(&phba->isr_lock, flags);
+ phba->todo_cq = 0;
+ spin_unlock_irqrestore(&phba->isr_lock, flags);
+ beiscsi_process_cq(phba);
+ }
+}
+
+static int be_iopoll(struct blk_iopoll *iop, int budget)
+{
+ static unsigned int ret;
+ struct beiscsi_hba *phba;
+
+ phba = container_of(iop, struct beiscsi_hba, iopoll);
+
+ ret = beiscsi_process_cq(phba);
+ if (ret < budget) {
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+ blk_iopoll_complete(iop);
+ hwi_ring_eq_db(phba, phwi_context->be_eq.q.id, 0,
+ 0, 1, 1);
+ }
+ return ret;
+}
+
+static void
+hwi_write_sgl(struct iscsi_wrb *pwrb, struct scatterlist *sg,
+ unsigned int num_sg, struct beiscsi_io_task *io_task)
+{
+ struct iscsi_sge *psgl;
+ unsigned short sg_len, index;
+ unsigned int sge_len = 0;
+ unsigned long long addr;
+ struct scatterlist *l_sg;
+ unsigned int offset;
+
+ AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_lo, pwrb,
+ io_task->bhs_pa.u.a32.address_lo);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_hi, pwrb,
+ io_task->bhs_pa.u.a32.address_hi);
+
+ l_sg = sg;
+ for (index = 0; (index < num_sg) && (index < 2); index++, sg_next(sg)) {
+ if (index == 0) {
+ sg_len = sg_dma_len(sg);
+ addr = (u64) sg_dma_address(sg);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_lo, pwrb,
+ (addr & 0xFFFFFFFF));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_hi, pwrb,
+ (addr >> 32));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_len, pwrb,
+ sg_len);
+ sge_len = sg_len;
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
+ 1);
+ } else {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb,
+ 0);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_r2t_offset,
+ pwrb, sge_len);
+ sg_len = sg_dma_len(sg);
+ addr = (u64) sg_dma_address(sg);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_addr_lo, pwrb,
+ (addr & 0xFFFFFFFF));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_addr_hi, pwrb,
+ (addr >> 32));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_len, pwrb,
+ sg_len);
+ }
+ }
+ psgl = (struct iscsi_sge *)io_task->psgl_handle->pfrag;
+ memset(psgl, 0, sizeof(*psgl) * BE2_SGE);
+
+ AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, io_task->bhs_len - 2);
+
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+ io_task->bhs_pa.u.a32.address_hi);
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+ io_task->bhs_pa.u.a32.address_lo);
+
+ if (num_sg == 2)
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge1_last, pwrb, 1);
+ sg = l_sg;
+ psgl++;
+ psgl++;
+ offset = 0;
+ for (index = 0; index < num_sg; index++, sg_next(sg), psgl++) {
+ sg_len = sg_dma_len(sg);
+ addr = (u64) sg_dma_address(sg);
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+ (addr & 0xFFFFFFFF));
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+ (addr >> 32));
+ AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, sg_len);
+ AMAP_SET_BITS(struct amap_iscsi_sge, sge_offset, psgl, offset);
+ AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 0);
+ offset += sg_len;
+ }
+ psgl--;
+ AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 1);
+}
+
+static void hwi_write_buffer(struct iscsi_wrb *pwrb, struct iscsi_task *task)
+{
+ struct iscsi_sge *psgl;
+ unsigned long long addr;
+ struct beiscsi_io_task *io_task = task->dd_data;
+ struct beiscsi_conn *beiscsi_conn = io_task->conn;
+ struct beiscsi_hba *phba = beiscsi_conn->phba;
+
+ io_task->bhs_len = sizeof(struct be_nonio_bhs) - 2;
+ AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_lo, pwrb,
+ io_task->bhs_pa.u.a32.address_lo);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, iscsi_bhs_addr_hi, pwrb,
+ io_task->bhs_pa.u.a32.address_hi);
+
+ if (task->data) {
+ if (task->data_count) {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
+ addr = (u64) pci_map_single(phba->pcidev,
+ task->data,
+ task->data_count, 1);
+ } else {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
+ addr = 0;
+ }
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_lo, pwrb,
+ (addr & 0xFFFFFFFF));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_addr_hi, pwrb,
+ (addr >> 32));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_len, pwrb,
+ task->data_count);
+
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sge0_last, pwrb, 1);
+ } else {
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
+ addr = 0;
+ }
+
+ psgl = (struct iscsi_sge *)io_task->psgl_handle->pfrag;
+
+ AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, io_task->bhs_len);
+
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+ io_task->bhs_pa.u.a32.address_hi);
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+ io_task->bhs_pa.u.a32.address_lo);
+ if (task->data) {
+ psgl++;
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl, 0);
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl, 0);
+ AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, 0);
+ AMAP_SET_BITS(struct amap_iscsi_sge, sge_offset, psgl, 0);
+ AMAP_SET_BITS(struct amap_iscsi_sge, rsvd0, psgl, 0);
+ AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 0);
+
+ psgl++;
+ if (task->data) {
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, psgl,
+ (addr & 0xFFFFFFFF));
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, psgl,
+ (addr >> 32));
+ }
+ AMAP_SET_BITS(struct amap_iscsi_sge, len, psgl, 0x106);
+ }
+ AMAP_SET_BITS(struct amap_iscsi_sge, last_sge, psgl, 1);
+}
+
+static void beiscsi_find_mem_req(struct beiscsi_hba *phba)
+{
+ unsigned int num_cq_pages, num_eq_pages, num_async_pdu_buf_pages;
+ unsigned int num_async_pdu_data_pages, wrb_sz_per_cxn;
+ unsigned int num_async_pdu_buf_sgl_pages, num_async_pdu_data_sgl_pages;
+
+ num_cq_pages = PAGES_REQUIRED(phba->params.num_cq_entries * \
+ sizeof(struct sol_cqe));
+ num_eq_pages = PAGES_REQUIRED(phba->params.num_eq_entries * \
+ sizeof(struct be_eq_entry));
+ num_async_pdu_buf_pages =
+ PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
+ phba->params.defpdu_hdr_sz);
+ num_async_pdu_buf_sgl_pages =
+ PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
+ sizeof(struct phys_addr));
+ num_async_pdu_data_pages =
+ PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
+ phba->params.defpdu_data_sz);
+ num_async_pdu_data_sgl_pages =
+ PAGES_REQUIRED(phba->params.asyncpdus_per_ctrl * \
+ sizeof(struct phys_addr));
+
+ phba->params.hwi_ws_sz = sizeof(struct hwi_controller);
+
+ phba->mem_req[ISCSI_MEM_GLOBAL_HEADER] = 2 *
+ BE_ISCSI_PDU_HEADER_SIZE;
+ phba->mem_req[HWI_MEM_ADDN_CONTEXT] =
+ sizeof(struct hwi_context_memory);
+
+ phba->mem_req[HWI_MEM_CQ] = num_cq_pages * PAGE_SIZE;
+ phba->mem_req[HWI_MEM_EQ] = num_eq_pages * PAGE_SIZE;
+
+ phba->mem_req[HWI_MEM_WRB] = sizeof(struct iscsi_wrb)
+ * (phba->params.wrbs_per_cxn)
+ * phba->params.cxns_per_ctrl;
+ wrb_sz_per_cxn = sizeof(struct wrb_handle) *
+ (phba->params.wrbs_per_cxn);
+ phba->mem_req[HWI_MEM_WRBH] = roundup_pow_of_two((wrb_sz_per_cxn) *
+ phba->params.cxns_per_ctrl);
+
+ phba->mem_req[HWI_MEM_SGLH] = sizeof(struct sgl_handle) *
+ phba->params.icds_per_ctrl;
+ phba->mem_req[HWI_MEM_SGE] = sizeof(struct iscsi_sge) *
+ phba->params.num_sge_per_io * phba->params.icds_per_ctrl;
+
+ phba->mem_req[HWI_MEM_ASYNC_HEADER_BUF] =
+ num_async_pdu_buf_pages * PAGE_SIZE;
+ phba->mem_req[HWI_MEM_ASYNC_DATA_BUF] =
+ num_async_pdu_data_pages * PAGE_SIZE;
+ phba->mem_req[HWI_MEM_ASYNC_HEADER_RING] =
+ num_async_pdu_buf_sgl_pages * PAGE_SIZE;
+ phba->mem_req[HWI_MEM_ASYNC_DATA_RING] =
+ num_async_pdu_data_sgl_pages * PAGE_SIZE;
+ phba->mem_req[HWI_MEM_ASYNC_HEADER_HANDLE] =
+ phba->params.asyncpdus_per_ctrl *
+ sizeof(struct async_pdu_handle);
+ phba->mem_req[HWI_MEM_ASYNC_DATA_HANDLE] =
+ phba->params.asyncpdus_per_ctrl *
+ sizeof(struct async_pdu_handle);
+ phba->mem_req[HWI_MEM_ASYNC_PDU_CONTEXT] =
+ sizeof(struct hwi_async_pdu_context) +
+ (phba->params.cxns_per_ctrl * sizeof(struct hwi_async_entry));
+}
+
+static int beiscsi_alloc_mem(struct beiscsi_hba *phba)
+{
+ struct be_mem_descriptor *mem_descr;
+ dma_addr_t bus_add;
+ struct mem_array *mem_arr, *mem_arr_orig;
+ unsigned int i, j, alloc_size, curr_alloc_size;
+
+ phba->phwi_ctrlr = kmalloc(phba->params.hwi_ws_sz, GFP_KERNEL);
+ if (!phba->phwi_ctrlr)
+ return -ENOMEM;
+
+ phba->init_mem = kcalloc(SE_MEM_MAX, sizeof(*mem_descr),
+ GFP_KERNEL);
+ if (!phba->init_mem) {
+ kfree(phba->phwi_ctrlr);
+ return -ENOMEM;
+ }
+
+ mem_arr_orig = kmalloc(sizeof(*mem_arr_orig) * BEISCSI_MAX_FRAGS_INIT,
+ GFP_KERNEL);
+ if (!mem_arr_orig) {
+ kfree(phba->init_mem);
+ kfree(phba->phwi_ctrlr);
+ return -ENOMEM;
+ }
+
+ mem_descr = phba->init_mem;
+ for (i = 0; i < SE_MEM_MAX; i++) {
+ j = 0;
+ mem_arr = mem_arr_orig;
+ alloc_size = phba->mem_req[i];
+ memset(mem_arr, 0, sizeof(struct mem_array) *
+ BEISCSI_MAX_FRAGS_INIT);
+ curr_alloc_size = min(be_max_phys_size * 1024, alloc_size);
+ do {
+ mem_arr->virtual_address = pci_alloc_consistent(
+ phba->pcidev,
+ curr_alloc_size,
+ &bus_add);
+ if (!mem_arr->virtual_address) {
+ if (curr_alloc_size <= BE_MIN_MEM_SIZE)
+ goto free_mem;
+ if (curr_alloc_size -
+ rounddown_pow_of_two(curr_alloc_size))
+ curr_alloc_size = rounddown_pow_of_two
+ (curr_alloc_size);
+ else
+ curr_alloc_size = curr_alloc_size / 2;
+ } else {
+ mem_arr->bus_address.u.
+ a64.address = (__u64) bus_add;
+ mem_arr->size = curr_alloc_size;
+ alloc_size -= curr_alloc_size;
+ curr_alloc_size = min(be_max_phys_size *
+ 1024, alloc_size);
+ j++;
+ mem_arr++;
+ }
+ } while (alloc_size);
+ mem_descr->num_elements = j;
+ mem_descr->size_in_bytes = phba->mem_req[i];
+ mem_descr->mem_array = kmalloc(sizeof(*mem_arr) * j,
+ GFP_KERNEL);
+ if (!mem_descr->mem_array)
+ goto free_mem;
+
+ memcpy(mem_descr->mem_array, mem_arr_orig,
+ sizeof(struct mem_array) * j);
+ mem_descr++;
+ }
+ kfree(mem_arr_orig);
+ return 0;
+free_mem:
+ mem_descr->num_elements = j;
+ while ((i) || (j)) {
+ for (j = mem_descr->num_elements; j > 0; j--) {
+ pci_free_consistent(phba->pcidev,
+ mem_descr->mem_array[j - 1].size,
+ mem_descr->mem_array[j - 1].
+ virtual_address,
+ mem_descr->mem_array[j - 1].
+ bus_address.u.a64.address);
+ }
+ if (i) {
+ i--;
+ kfree(mem_descr->mem_array);
+ mem_descr--;
+ }
+ }
+ kfree(mem_arr_orig);
+ kfree(phba->init_mem);
+ kfree(phba->phwi_ctrlr);
+ return -ENOMEM;
+}
+
+static int beiscsi_get_memory(struct beiscsi_hba *phba)
+{
+ beiscsi_find_mem_req(phba);
+ return beiscsi_alloc_mem(phba);
+}
+
+static void iscsi_init_global_templates(struct beiscsi_hba *phba)
+{
+ struct pdu_data_out *pdata_out;
+ struct pdu_nop_out *pnop_out;
+ struct be_mem_descriptor *mem_descr;
+
+ mem_descr = phba->init_mem;
+ mem_descr += ISCSI_MEM_GLOBAL_HEADER;
+ pdata_out =
+ (struct pdu_data_out *)mem_descr->mem_array[0].virtual_address;
+ memset(pdata_out, 0, BE_ISCSI_PDU_HEADER_SIZE);
+
+ AMAP_SET_BITS(struct amap_pdu_data_out, opcode, pdata_out,
+ IIOC_SCSI_DATA);
+
+ pnop_out =
+ (struct pdu_nop_out *)((unsigned char *)mem_descr->mem_array[0].
+ virtual_address + BE_ISCSI_PDU_HEADER_SIZE);
+
+ memset(pnop_out, 0, BE_ISCSI_PDU_HEADER_SIZE);
+ AMAP_SET_BITS(struct amap_pdu_nop_out, ttt, pnop_out, 0xFFFFFFFF);
+ AMAP_SET_BITS(struct amap_pdu_nop_out, f_bit, pnop_out, 1);
+ AMAP_SET_BITS(struct amap_pdu_nop_out, i_bit, pnop_out, 0);
+}
+
+static void beiscsi_init_wrb_handle(struct beiscsi_hba *phba)
+{
+ struct be_mem_descriptor *mem_descr_wrbh, *mem_descr_wrb;
+ struct wrb_handle *pwrb_handle;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_wrb_context *pwrb_context;
+ struct iscsi_wrb *pwrb;
+ unsigned int num_cxn_wrbh;
+ unsigned int num_cxn_wrb, j, idx, index;
+
+ mem_descr_wrbh = phba->init_mem;
+ mem_descr_wrbh += HWI_MEM_WRBH;
+
+ mem_descr_wrb = phba->init_mem;
+ mem_descr_wrb += HWI_MEM_WRB;
+
+ idx = 0;
+ pwrb_handle = mem_descr_wrbh->mem_array[idx].virtual_address;
+ num_cxn_wrbh = ((mem_descr_wrbh->mem_array[idx].size) /
+ ((sizeof(struct wrb_handle)) *
+ phba->params.wrbs_per_cxn));
+ phwi_ctrlr = phba->phwi_ctrlr;
+
+ for (index = 0; index < phba->params.cxns_per_ctrl * 2; index += 2) {
+ pwrb_context = &phwi_ctrlr->wrb_context[index];
+ SE_DEBUG(DBG_LVL_8, "cid=%d pwrb_context=%p \n", index,
+ pwrb_context);
+ pwrb_context->pwrb_handle_base =
+ kzalloc(sizeof(struct wrb_handle *) *
+ phba->params.wrbs_per_cxn, GFP_KERNEL);
+ pwrb_context->pwrb_handle_basestd =
+ kzalloc(sizeof(struct wrb_handle *) *
+ phba->params.wrbs_per_cxn, GFP_KERNEL);
+ if (num_cxn_wrbh) {
+ pwrb_context->alloc_index = 0;
+ pwrb_context->wrb_handles_available = 0;
+ for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
+ pwrb_context->pwrb_handle_base[j] = pwrb_handle;
+ pwrb_context->pwrb_handle_basestd[j] =
+ pwrb_handle;
+ pwrb_context->wrb_handles_available++;
+ pwrb_handle++;
+ }
+ pwrb_context->free_index = 0;
+ num_cxn_wrbh--;
+ } else {
+ idx++;
+ pwrb_handle =
+ mem_descr_wrbh->mem_array[idx].virtual_address;
+ num_cxn_wrbh =
+ ((mem_descr_wrbh->mem_array[idx].size) /
+ ((sizeof(struct wrb_handle)) *
+ phba->params.wrbs_per_cxn));
+ pwrb_context->alloc_index = 0;
+ for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
+ pwrb_context->pwrb_handle_base[j] = pwrb_handle;
+ pwrb_context->pwrb_handle_basestd[j] =
+ pwrb_handle;
+ pwrb_context->wrb_handles_available++;
+ pwrb_handle++;
+ }
+ pwrb_context->free_index = 0;
+ num_cxn_wrbh--;
+ }
+ }
+ idx = 0;
+ pwrb = mem_descr_wrb->mem_array[idx].virtual_address;
+ num_cxn_wrb =
+ ((mem_descr_wrb->mem_array[idx].size) / (sizeof(struct iscsi_wrb)) *
+ phba->params.wrbs_per_cxn);
+
+ for (index = 0; index < phba->params.cxns_per_ctrl; index += 2) {
+ pwrb_context = &phwi_ctrlr->wrb_context[index];
+ if (num_cxn_wrb) {
+ for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
+ pwrb_handle = pwrb_context->pwrb_handle_base[j];
+ pwrb_handle->pwrb = pwrb;
+ pwrb++;
+ }
+ num_cxn_wrb--;
+ } else {
+ idx++;
+ pwrb = mem_descr_wrb->mem_array[idx].virtual_address;
+ num_cxn_wrb = ((mem_descr_wrb->mem_array[idx].size) /
+ (sizeof(struct iscsi_wrb)) *
+ phba->params.wrbs_per_cxn);
+ for (j = 0; j < phba->params.wrbs_per_cxn; j++) {
+ pwrb_handle = pwrb_context->pwrb_handle_base[j];
+ pwrb_handle->pwrb = pwrb;
+ pwrb++;
+ }
+ num_cxn_wrb--;
+ }
+ }
+}
+
+static void hwi_init_async_pdu_ctx(struct beiscsi_hba *phba)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hba_parameters *p = &phba->params;
+ struct hwi_async_pdu_context *pasync_ctx;
+ struct async_pdu_handle *pasync_header_h, *pasync_data_h;
+ unsigned int index;
+ struct be_mem_descriptor *mem_descr;
+
+ mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_PDU_CONTEXT;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_ctrlr->phwi_ctxt->pasync_ctx = (struct hwi_async_pdu_context *)
+ mem_descr->mem_array[0].virtual_address;
+ pasync_ctx = phwi_ctrlr->phwi_ctxt->pasync_ctx;
+ memset(pasync_ctx, 0, sizeof(*pasync_ctx));
+
+ pasync_ctx->async_header.num_entries = p->asyncpdus_per_ctrl;
+ pasync_ctx->async_header.buffer_size = p->defpdu_hdr_sz;
+ pasync_ctx->async_data.buffer_size = p->defpdu_data_sz;
+ pasync_ctx->async_data.num_entries = p->asyncpdus_per_ctrl;
+
+ mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_HEADER_BUF;
+ if (mem_descr->mem_array[0].virtual_address) {
+ SE_DEBUG(DBG_LVL_8,
+ "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_HEADER_BUF"
+ "va=%p \n", mem_descr->mem_array[0].virtual_address);
+ } else
+ shost_printk(KERN_WARNING, phba->shost,
+ "No Virtual address \n");
+
+ pasync_ctx->async_header.va_base =
+ mem_descr->mem_array[0].virtual_address;
+
+ pasync_ctx->async_header.pa_base.u.a64.address =
+ mem_descr->mem_array[0].bus_address.u.a64.address;
+
+ mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_HEADER_RING;
+ if (mem_descr->mem_array[0].virtual_address) {
+ SE_DEBUG(DBG_LVL_8,
+ "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_HEADER_RING"
+ "va=%p \n", mem_descr->mem_array[0].virtual_address);
+ } else
+ shost_printk(KERN_WARNING, phba->shost,
+ "No Virtual address \n");
+ pasync_ctx->async_header.ring_base =
+ mem_descr->mem_array[0].virtual_address;
+
+ mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_HEADER_HANDLE;
+ if (mem_descr->mem_array[0].virtual_address) {
+ SE_DEBUG(DBG_LVL_8,
+ "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_HEADER_HANDLE"
+ "va=%p \n", mem_descr->mem_array[0].virtual_address);
+ } else
+ shost_printk(KERN_WARNING, phba->shost,
+ "No Virtual address \n");
+
+ pasync_ctx->async_header.handle_base =
+ mem_descr->mem_array[0].virtual_address;
+ pasync_ctx->async_header.writables = 0;
+ INIT_LIST_HEAD(&pasync_ctx->async_header.free_list);
+
+ mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_DATA_BUF;
+ if (mem_descr->mem_array[0].virtual_address) {
+ SE_DEBUG(DBG_LVL_8,
+ "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_DATA_BUF"
+ "va=%p \n", mem_descr->mem_array[0].virtual_address);
+ } else
+ shost_printk(KERN_WARNING, phba->shost,
+ "No Virtual address \n");
+ pasync_ctx->async_data.va_base =
+ mem_descr->mem_array[0].virtual_address;
+ pasync_ctx->async_data.pa_base.u.a64.address =
+ mem_descr->mem_array[0].bus_address.u.a64.address;
+
+ mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_DATA_RING;
+ if (mem_descr->mem_array[0].virtual_address) {
+ SE_DEBUG(DBG_LVL_8,
+ "hwi_init_async_pdu_ctx HWI_MEM_ASYNC_DATA_RING"
+ "va=%p \n", mem_descr->mem_array[0].virtual_address);
+ } else
+ shost_printk(KERN_WARNING, phba->shost,
+ "No Virtual address \n");
+
+ pasync_ctx->async_data.ring_base =
+ mem_descr->mem_array[0].virtual_address;
+
+ mem_descr = (struct be_mem_descriptor *)phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_DATA_HANDLE;
+ if (!mem_descr->mem_array[0].virtual_address)
+ shost_printk(KERN_WARNING, phba->shost,
+ "No Virtual address \n");
+
+ pasync_ctx->async_data.handle_base =
+ mem_descr->mem_array[0].virtual_address;
+ pasync_ctx->async_data.writables = 0;
+ INIT_LIST_HEAD(&pasync_ctx->async_data.free_list);
+
+ pasync_header_h =
+ (struct async_pdu_handle *)pasync_ctx->async_header.handle_base;
+ pasync_data_h =
+ (struct async_pdu_handle *)pasync_ctx->async_data.handle_base;
+
+ for (index = 0; index < p->asyncpdus_per_ctrl; index++) {
+ pasync_header_h->cri = -1;
+ pasync_header_h->index = (char)index;
+ INIT_LIST_HEAD(&pasync_header_h->link);
+ pasync_header_h->pbuffer =
+ (void *)((unsigned long)
+ (pasync_ctx->async_header.va_base) +
+ (p->defpdu_hdr_sz * index));
+
+ pasync_header_h->pa.u.a64.address =
+ pasync_ctx->async_header.pa_base.u.a64.address +
+ (p->defpdu_hdr_sz * index);
+
+ list_add_tail(&pasync_header_h->link,
+ &pasync_ctx->async_header.free_list);
+ pasync_header_h++;
+ pasync_ctx->async_header.free_entries++;
+ pasync_ctx->async_header.writables++;
+
+ INIT_LIST_HEAD(&pasync_ctx->async_entry[index].wait_queue.list);
+ INIT_LIST_HEAD(&pasync_ctx->async_entry[index].
+ header_busy_list);
+ pasync_data_h->cri = -1;
+ pasync_data_h->index = (char)index;
+ INIT_LIST_HEAD(&pasync_data_h->link);
+ pasync_data_h->pbuffer =
+ (void *)((unsigned long)
+ (pasync_ctx->async_data.va_base) +
+ (p->defpdu_data_sz * index));
+
+ pasync_data_h->pa.u.a64.address =
+ pasync_ctx->async_data.pa_base.u.a64.address +
+ (p->defpdu_data_sz * index);
+
+ list_add_tail(&pasync_data_h->link,
+ &pasync_ctx->async_data.free_list);
+ pasync_data_h++;
+ pasync_ctx->async_data.free_entries++;
+ pasync_ctx->async_data.writables++;
+
+ INIT_LIST_HEAD(&pasync_ctx->async_entry[index].data_busy_list);
+ }
+
+ pasync_ctx->async_header.host_write_ptr = 0;
+ pasync_ctx->async_header.ep_read_ptr = -1;
+ pasync_ctx->async_data.host_write_ptr = 0;
+ pasync_ctx->async_data.ep_read_ptr = -1;
+}
+
+static int
+be_sgl_create_contiguous(void *virtual_address,
+ u64 physical_address, u32 length,
+ struct be_dma_mem *sgl)
+{
+ WARN_ON(!virtual_address);
+ WARN_ON(!physical_address);
+ WARN_ON(!length > 0);
+ WARN_ON(!sgl);
+
+ sgl->va = virtual_address;
+ sgl->dma = physical_address;
+ sgl->size = length;
+
+ return 0;
+}
+
+static void be_sgl_destroy_contiguous(struct be_dma_mem *sgl)
+{
+ memset(sgl, 0, sizeof(*sgl));
+}
+
+static void
+hwi_build_be_sgl_arr(struct beiscsi_hba *phba,
+ struct mem_array *pmem, struct be_dma_mem *sgl)
+{
+ if (sgl->va)
+ be_sgl_destroy_contiguous(sgl);
+
+ be_sgl_create_contiguous(pmem->virtual_address,
+ pmem->bus_address.u.a64.address,
+ pmem->size, sgl);
+}
+
+static void
+hwi_build_be_sgl_by_offset(struct beiscsi_hba *phba,
+ struct mem_array *pmem, struct be_dma_mem *sgl)
+{
+ if (sgl->va)
+ be_sgl_destroy_contiguous(sgl);
+
+ be_sgl_create_contiguous((unsigned char *)pmem->virtual_address,
+ pmem->bus_address.u.a64.address,
+ pmem->size, sgl);
+}
+
+static int be_fill_queue(struct be_queue_info *q,
+ u16 len, u16 entry_size, void *vaddress)
+{
+ struct be_dma_mem *mem = &q->dma_mem;
+
+ memset(q, 0, sizeof(*q));
+ q->len = len;
+ q->entry_size = entry_size;
+ mem->size = len * entry_size;
+ mem->va = vaddress;
+ if (!mem->va)
+ return -ENOMEM;
+ memset(mem->va, 0, mem->size);
+ return 0;
+}
+
+static int beiscsi_create_eq(struct beiscsi_hba *phba,
+ struct hwi_context_memory *phwi_context)
+{
+ unsigned int idx;
+ int ret;
+ struct be_queue_info *eq;
+ struct be_dma_mem *mem;
+ struct be_mem_descriptor *mem_descr;
+ void *eq_vaddress;
+
+ idx = 0;
+ eq = &phwi_context->be_eq.q;
+ mem = &eq->dma_mem;
+ mem_descr = phba->init_mem;
+ mem_descr += HWI_MEM_EQ;
+ eq_vaddress = mem_descr->mem_array[idx].virtual_address;
+
+ ret = be_fill_queue(eq, phba->params.num_eq_entries,
+ sizeof(struct be_eq_entry), eq_vaddress);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "be_fill_queue Failed for EQ \n");
+ return ret;
+ }
+
+ mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
+
+ ret = beiscsi_cmd_eq_create(&phba->ctrl, eq,
+ phwi_context->be_eq.cur_eqd);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_cmd_eq_create"
+ "Failedfor EQ \n");
+ return ret;
+ }
+ SE_DEBUG(DBG_LVL_8, "eq id is %d\n", phwi_context->be_eq.q.id);
+ return 0;
+}
+
+static int beiscsi_create_cq(struct beiscsi_hba *phba,
+ struct hwi_context_memory *phwi_context)
+{
+ unsigned int idx;
+ int ret;
+ struct be_queue_info *cq, *eq;
+ struct be_dma_mem *mem;
+ struct be_mem_descriptor *mem_descr;
+ void *cq_vaddress;
+
+ idx = 0;
+ cq = &phwi_context->be_cq;
+ eq = &phwi_context->be_eq.q;
+ mem = &cq->dma_mem;
+ mem_descr = phba->init_mem;
+ mem_descr += HWI_MEM_CQ;
+ cq_vaddress = mem_descr->mem_array[idx].virtual_address;
+ ret = be_fill_queue(cq, phba->params.icds_per_ctrl / 2,
+ sizeof(struct sol_cqe), cq_vaddress);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "be_fill_queue Failed for ISCSI CQ \n");
+ return ret;
+ }
+
+ mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
+ ret = beiscsi_cmd_cq_create(&phba->ctrl, cq, eq, false, false, 0);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "beiscsi_cmd_eq_create Failed for ISCSI CQ \n");
+ return ret;
+ }
+ SE_DEBUG(DBG_LVL_8, "iscsi cq id is %d\n", phwi_context->be_cq.id);
+ SE_DEBUG(DBG_LVL_8, "ISCSI CQ CREATED\n");
+ return 0;
+}
+
+static int
+beiscsi_create_def_hdr(struct beiscsi_hba *phba,
+ struct hwi_context_memory *phwi_context,
+ struct hwi_controller *phwi_ctrlr,
+ unsigned int def_pdu_ring_sz)
+{
+ unsigned int idx;
+ int ret;
+ struct be_queue_info *dq, *cq;
+ struct be_dma_mem *mem;
+ struct be_mem_descriptor *mem_descr;
+ void *dq_vaddress;
+
+ idx = 0;
+ dq = &phwi_context->be_def_hdrq;
+ cq = &phwi_context->be_cq;
+ mem = &dq->dma_mem;
+ mem_descr = phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_HEADER_RING;
+ dq_vaddress = mem_descr->mem_array[idx].virtual_address;
+ ret = be_fill_queue(dq, mem_descr->mem_array[0].size /
+ sizeof(struct phys_addr),
+ sizeof(struct phys_addr), dq_vaddress);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "be_fill_queue Failed for DEF PDU HDR\n");
+ return ret;
+ }
+ mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
+ ret = be_cmd_create_default_pdu_queue(&phba->ctrl, cq, dq,
+ def_pdu_ring_sz,
+ phba->params.defpdu_hdr_sz);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "be_cmd_create_default_pdu_queue Failed DEFHDR\n");
+ return ret;
+ }
+ phwi_ctrlr->default_pdu_hdr.id = phwi_context->be_def_hdrq.id;
+ SE_DEBUG(DBG_LVL_8, "iscsi def pdu id is %d\n",
+ phwi_context->be_def_hdrq.id);
+ hwi_post_async_buffers(phba, 1);
+ return 0;
+}
+
+static int
+beiscsi_create_def_data(struct beiscsi_hba *phba,
+ struct hwi_context_memory *phwi_context,
+ struct hwi_controller *phwi_ctrlr,
+ unsigned int def_pdu_ring_sz)
+{
+ unsigned int idx;
+ int ret;
+ struct be_queue_info *dataq, *cq;
+ struct be_dma_mem *mem;
+ struct be_mem_descriptor *mem_descr;
+ void *dq_vaddress;
+
+ idx = 0;
+ dataq = &phwi_context->be_def_dataq;
+ cq = &phwi_context->be_cq;
+ mem = &dataq->dma_mem;
+ mem_descr = phba->init_mem;
+ mem_descr += HWI_MEM_ASYNC_DATA_RING;
+ dq_vaddress = mem_descr->mem_array[idx].virtual_address;
+ ret = be_fill_queue(dataq, mem_descr->mem_array[0].size /
+ sizeof(struct phys_addr),
+ sizeof(struct phys_addr), dq_vaddress);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "be_fill_queue Failed for DEF PDU DATA\n");
+ return ret;
+ }
+ mem->dma = mem_descr->mem_array[idx].bus_address.u.a64.address;
+ ret = be_cmd_create_default_pdu_queue(&phba->ctrl, cq, dataq,
+ def_pdu_ring_sz,
+ phba->params.defpdu_data_sz);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost,
+ "be_cmd_create_default_pdu_queue Failed"
+ " for DEF PDU DATA\n");
+ return ret;
+ }
+ phwi_ctrlr->default_pdu_data.id = phwi_context->be_def_dataq.id;
+ SE_DEBUG(DBG_LVL_8, "iscsi def data id is %d\n",
+ phwi_context->be_def_dataq.id);
+ hwi_post_async_buffers(phba, 0);
+ SE_DEBUG(DBG_LVL_8, "DEFAULT PDU DATA RING CREATED \n");
+ return 0;
+}
+
+static int
+beiscsi_post_pages(struct beiscsi_hba *phba)
+{
+ struct be_mem_descriptor *mem_descr;
+ struct mem_array *pm_arr;
+ unsigned int page_offset, i;
+ struct be_dma_mem sgl;
+ int status;
+
+ mem_descr = phba->init_mem;
+ mem_descr += HWI_MEM_SGE;
+ pm_arr = mem_descr->mem_array;
+
+ page_offset = (sizeof(struct iscsi_sge) * phba->params.num_sge_per_io *
+ phba->fw_config.iscsi_icd_start) / PAGE_SIZE;
+ for (i = 0; i < mem_descr->num_elements; i++) {
+ hwi_build_be_sgl_arr(phba, pm_arr, &sgl);
+ status = be_cmd_iscsi_post_sgl_pages(&phba->ctrl, &sgl,
+ page_offset,
+ (pm_arr->size / PAGE_SIZE));
+ page_offset += pm_arr->size / PAGE_SIZE;
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "post sgl failed.\n");
+ return status;
+ }
+ pm_arr++;
+ }
+ SE_DEBUG(DBG_LVL_8, "POSTED PAGES \n");
+ return 0;
+}
+
+static int
+beiscsi_create_wrb_rings(struct beiscsi_hba *phba,
+ struct hwi_context_memory *phwi_context,
+ struct hwi_controller *phwi_ctrlr)
+{
+ unsigned int wrb_mem_index, offset, size, num_wrb_rings;
+ u64 pa_addr_lo;
+ unsigned int idx, num, i;
+ struct mem_array *pwrb_arr;
+ void *wrb_vaddr;
+ struct be_dma_mem sgl;
+ struct be_mem_descriptor *mem_descr;
+ int status;
+
+ idx = 0;
+ mem_descr = phba->init_mem;
+ mem_descr += HWI_MEM_WRB;
+ pwrb_arr = kmalloc(sizeof(*pwrb_arr) * phba->params.cxns_per_ctrl,
+ GFP_KERNEL);
+ if (!pwrb_arr) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Memory alloc failed in create wrb ring.\n");
+ return -ENOMEM;
+ }
+ wrb_vaddr = mem_descr->mem_array[idx].virtual_address;
+ pa_addr_lo = mem_descr->mem_array[idx].bus_address.u.a64.address;
+ num_wrb_rings = mem_descr->mem_array[idx].size /
+ (phba->params.wrbs_per_cxn * sizeof(struct iscsi_wrb));
+
+ for (num = 0; num < phba->params.cxns_per_ctrl; num++) {
+ if (num_wrb_rings) {
+ pwrb_arr[num].virtual_address = wrb_vaddr;
+ pwrb_arr[num].bus_address.u.a64.address = pa_addr_lo;
+ pwrb_arr[num].size = phba->params.wrbs_per_cxn *
+ sizeof(struct iscsi_wrb);
+ wrb_vaddr += pwrb_arr[num].size;
+ pa_addr_lo += pwrb_arr[num].size;
+ num_wrb_rings--;
+ } else {
+ idx++;
+ wrb_vaddr = mem_descr->mem_array[idx].virtual_address;
+ pa_addr_lo = mem_descr->mem_array[idx].\
+ bus_address.u.a64.address;
+ num_wrb_rings = mem_descr->mem_array[idx].size /
+ (phba->params.wrbs_per_cxn *
+ sizeof(struct iscsi_wrb));
+ pwrb_arr[num].virtual_address = wrb_vaddr;
+ pwrb_arr[num].bus_address.u.a64.address\
+ = pa_addr_lo;
+ pwrb_arr[num].size = phba->params.wrbs_per_cxn *
+ sizeof(struct iscsi_wrb);
+ wrb_vaddr += pwrb_arr[num].size;
+ pa_addr_lo += pwrb_arr[num].size;
+ num_wrb_rings--;
+ }
+ }
+ for (i = 0; i < phba->params.cxns_per_ctrl; i++) {
+ wrb_mem_index = 0;
+ offset = 0;
+ size = 0;
+
+ hwi_build_be_sgl_by_offset(phba, &pwrb_arr[i], &sgl);
+ status = be_cmd_wrbq_create(&phba->ctrl, &sgl,
+ &phwi_context->be_wrbq[i]);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "wrbq create failed.");
+ return status;
+ }
+ phwi_ctrlr->wrb_context[i].cid = phwi_context->be_wrbq[i].id;
+ }
+ kfree(pwrb_arr);
+ return 0;
+}
+
+static void free_wrb_handles(struct beiscsi_hba *phba)
+{
+ unsigned int index;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_wrb_context *pwrb_context;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ for (index = 0; index < phba->params.cxns_per_ctrl * 2; index += 2) {
+ pwrb_context = &phwi_ctrlr->wrb_context[index];
+ kfree(pwrb_context->pwrb_handle_base);
+ kfree(pwrb_context->pwrb_handle_basestd);
+ }
+}
+
+static void hwi_cleanup(struct beiscsi_hba *phba)
+{
+ struct be_queue_info *q;
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ int i;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+ for (i = 0; i < phba->params.cxns_per_ctrl; i++) {
+ q = &phwi_context->be_wrbq[i];
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_WRBQ);
+ }
+
+ free_wrb_handles(phba);
+
+ q = &phwi_context->be_def_hdrq;
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_DPDUQ);
+
+ q = &phwi_context->be_def_dataq;
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_DPDUQ);
+
+ beiscsi_cmd_q_destroy(ctrl, NULL, QTYPE_SGL);
+
+ q = &phwi_context->be_cq;
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_CQ);
+
+ q = &phwi_context->be_eq.q;
+ if (q->created)
+ beiscsi_cmd_q_destroy(ctrl, q, QTYPE_EQ);
+}
+
+static int hwi_init_port(struct beiscsi_hba *phba)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ unsigned int def_pdu_ring_sz;
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ int status;
+
+ def_pdu_ring_sz =
+ phba->params.asyncpdus_per_ctrl * sizeof(struct phys_addr);
+ phwi_ctrlr = phba->phwi_ctrlr;
+
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+ phwi_context->be_eq.max_eqd = 0;
+ phwi_context->be_eq.min_eqd = 0;
+ phwi_context->be_eq.cur_eqd = 64;
+ phwi_context->be_eq.enable_aic = false;
+ be_cmd_fw_initialize(&phba->ctrl);
+ status = beiscsi_create_eq(phba, phwi_context);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost, "EQ not created \n");
+ goto error;
+ }
+
+ status = mgmt_check_supported_fw(ctrl);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Unsupported fw version \n");
+ goto error;
+ }
+
+ status = mgmt_get_fw_config(ctrl, phba);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Error getting fw config\n");
+ goto error;
+ }
+
+ status = beiscsi_create_cq(phba, phwi_context);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost, "CQ not created\n");
+ goto error;
+ }
+
+ status = beiscsi_create_def_hdr(phba, phwi_context, phwi_ctrlr,
+ def_pdu_ring_sz);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Default Header not created\n");
+ goto error;
+ }
+
+ status = beiscsi_create_def_data(phba, phwi_context,
+ phwi_ctrlr, def_pdu_ring_sz);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Default Data not created\n");
+ goto error;
+ }
+
+ status = beiscsi_post_pages(phba);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost, "Post SGL Pages Failed\n");
+ goto error;
+ }
+
+ status = beiscsi_create_wrb_rings(phba, phwi_context, phwi_ctrlr);
+ if (status != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "WRB Rings not created\n");
+ goto error;
+ }
+
+ SE_DEBUG(DBG_LVL_8, "hwi_init_port success\n");
+ return 0;
+
+error:
+ shost_printk(KERN_ERR, phba->shost, "hwi_init_port failed");
+ hwi_cleanup(phba);
+ return -ENOMEM;
+}
+
+
+static int hwi_init_controller(struct beiscsi_hba *phba)
+{
+ struct hwi_controller *phwi_ctrlr;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ if (1 == phba->init_mem[HWI_MEM_ADDN_CONTEXT].num_elements) {
+ phwi_ctrlr->phwi_ctxt = (struct hwi_context_memory *)phba->
+ init_mem[HWI_MEM_ADDN_CONTEXT].mem_array[0].virtual_address;
+ SE_DEBUG(DBG_LVL_8, " phwi_ctrlr->phwi_ctxt=%p \n",
+ phwi_ctrlr->phwi_ctxt);
+ } else {
+ shost_printk(KERN_ERR, phba->shost,
+ "HWI_MEM_ADDN_CONTEXT is more than one element."
+ "Failing to load\n");
+ return -ENOMEM;
+ }
+
+ iscsi_init_global_templates(phba);
+ beiscsi_init_wrb_handle(phba);
+ hwi_init_async_pdu_ctx(phba);
+ if (hwi_init_port(phba) != 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "hwi_init_controller failed\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void beiscsi_free_mem(struct beiscsi_hba *phba)
+{
+ struct be_mem_descriptor *mem_descr;
+ int i, j;
+
+ mem_descr = phba->init_mem;
+ i = 0;
+ j = 0;
+ for (i = 0; i < SE_MEM_MAX; i++) {
+ for (j = mem_descr->num_elements; j > 0; j--) {
+ pci_free_consistent(phba->pcidev,
+ mem_descr->mem_array[j - 1].size,
+ mem_descr->mem_array[j - 1].virtual_address,
+ mem_descr->mem_array[j - 1].bus_address.
+ u.a64.address);
+ }
+ kfree(mem_descr->mem_array);
+ mem_descr++;
+ }
+ kfree(phba->init_mem);
+ kfree(phba->phwi_ctrlr);
+}
+
+static int beiscsi_init_controller(struct beiscsi_hba *phba)
+{
+ int ret = -ENOMEM;
+
+ ret = beiscsi_get_memory(phba);
+ if (ret < 0) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe -"
+ "Failed in beiscsi_alloc_memory \n");
+ return ret;
+ }
+
+ ret = hwi_init_controller(phba);
+ if (ret)
+ goto free_init;
+ SE_DEBUG(DBG_LVL_8, "Return success from beiscsi_init_controller");
+ return 0;
+
+free_init:
+ beiscsi_free_mem(phba);
+ return -ENOMEM;
+}
+
+static int beiscsi_init_sgl_handle(struct beiscsi_hba *phba)
+{
+ struct be_mem_descriptor *mem_descr_sglh, *mem_descr_sg;
+ struct sgl_handle *psgl_handle;
+ struct iscsi_sge *pfrag;
+ unsigned int arr_index, i, idx;
+
+ phba->io_sgl_hndl_avbl = 0;
+ phba->eh_sgl_hndl_avbl = 0;
+ mem_descr_sglh = phba->init_mem;
+ mem_descr_sglh += HWI_MEM_SGLH;
+ if (1 == mem_descr_sglh->num_elements) {
+ phba->io_sgl_hndl_base = kzalloc(sizeof(struct sgl_handle *) *
+ phba->params.ios_per_ctrl,
+ GFP_KERNEL);
+ if (!phba->io_sgl_hndl_base) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Mem Alloc Failed. Failing to load\n");
+ return -ENOMEM;
+ }
+ phba->eh_sgl_hndl_base = kzalloc(sizeof(struct sgl_handle *) *
+ (phba->params.icds_per_ctrl -
+ phba->params.ios_per_ctrl),
+ GFP_KERNEL);
+ if (!phba->eh_sgl_hndl_base) {
+ kfree(phba->io_sgl_hndl_base);
+ shost_printk(KERN_ERR, phba->shost,
+ "Mem Alloc Failed. Failing to load\n");
+ return -ENOMEM;
+ }
+ } else {
+ shost_printk(KERN_ERR, phba->shost,
+ "HWI_MEM_SGLH is more than one element."
+ "Failing to load\n");
+ return -ENOMEM;
+ }
+
+ arr_index = 0;
+ idx = 0;
+ while (idx < mem_descr_sglh->num_elements) {
+ psgl_handle = mem_descr_sglh->mem_array[idx].virtual_address;
+
+ for (i = 0; i < (mem_descr_sglh->mem_array[idx].size /
+ sizeof(struct sgl_handle)); i++) {
+ if (arr_index < phba->params.ios_per_ctrl) {
+ phba->io_sgl_hndl_base[arr_index] = psgl_handle;
+ phba->io_sgl_hndl_avbl++;
+ arr_index++;
+ } else {
+ phba->eh_sgl_hndl_base[arr_index -
+ phba->params.ios_per_ctrl] =
+ psgl_handle;
+ arr_index++;
+ phba->eh_sgl_hndl_avbl++;
+ }
+ psgl_handle++;
+ }
+ idx++;
+ }
+ SE_DEBUG(DBG_LVL_8,
+ "phba->io_sgl_hndl_avbl=%d"
+ "phba->eh_sgl_hndl_avbl=%d \n",
+ phba->io_sgl_hndl_avbl,
+ phba->eh_sgl_hndl_avbl);
+ mem_descr_sg = phba->init_mem;
+ mem_descr_sg += HWI_MEM_SGE;
+ SE_DEBUG(DBG_LVL_8, "\n mem_descr_sg->num_elements=%d \n",
+ mem_descr_sg->num_elements);
+ arr_index = 0;
+ idx = 0;
+ while (idx < mem_descr_sg->num_elements) {
+ pfrag = mem_descr_sg->mem_array[idx].virtual_address;
+
+ for (i = 0;
+ i < (mem_descr_sg->mem_array[idx].size) /
+ (sizeof(struct iscsi_sge) * phba->params.num_sge_per_io);
+ i++) {
+ if (arr_index < phba->params.ios_per_ctrl)
+ psgl_handle = phba->io_sgl_hndl_base[arr_index];
+ else
+ psgl_handle = phba->eh_sgl_hndl_base[arr_index -
+ phba->params.ios_per_ctrl];
+ psgl_handle->pfrag = pfrag;
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_hi, pfrag, 0);
+ AMAP_SET_BITS(struct amap_iscsi_sge, addr_lo, pfrag, 0);
+ pfrag += phba->params.num_sge_per_io;
+ psgl_handle->sgl_index =
+ phba->fw_config.iscsi_cid_start + arr_index++;
+ }
+ idx++;
+ }
+ phba->io_sgl_free_index = 0;
+ phba->io_sgl_alloc_index = 0;
+ phba->eh_sgl_free_index = 0;
+ phba->eh_sgl_alloc_index = 0;
+ return 0;
+}
+
+static int hba_setup_cid_tbls(struct beiscsi_hba *phba)
+{
+ int i, new_cid;
+
+ phba->cid_array = kmalloc(sizeof(void *) * phba->params.cxns_per_ctrl,
+ GFP_KERNEL);
+ if (!phba->cid_array) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Failed to allocate memory in "
+ "hba_setup_cid_tbls\n");
+ return -ENOMEM;
+ }
+ phba->ep_array = kmalloc(sizeof(struct iscsi_endpoint *) *
+ phba->params.cxns_per_ctrl * 2, GFP_KERNEL);
+ if (!phba->ep_array) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Failed to allocate memory in "
+ "hba_setup_cid_tbls \n");
+ kfree(phba->cid_array);
+ return -ENOMEM;
+ }
+ new_cid = phba->fw_config.iscsi_icd_start;
+ for (i = 0; i < phba->params.cxns_per_ctrl; i++) {
+ phba->cid_array[i] = new_cid;
+ new_cid += 2;
+ }
+ phba->avlbl_cids = phba->params.cxns_per_ctrl;
+ return 0;
+}
+
+static unsigned char hwi_enable_intr(struct beiscsi_hba *phba)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ struct be_queue_info *eq;
+ u8 __iomem *addr;
+ u32 reg;
+ u32 enabled;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+
+ eq = &phwi_context->be_eq.q;
+ addr = (u8 __iomem *) ((u8 __iomem *) ctrl->pcicfg +
+ PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET);
+ reg = ioread32(addr);
+ SE_DEBUG(DBG_LVL_8, "reg =x%08x \n", reg);
+
+ enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+ if (!enabled) {
+ reg |= MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+ SE_DEBUG(DBG_LVL_8, "reg =x%08x addr=%p \n", reg, addr);
+ iowrite32(reg, addr);
+ SE_DEBUG(DBG_LVL_8, "eq->id=%d \n", eq->id);
+
+ hwi_ring_eq_db(phba, eq->id, 0, 0, 1, 1);
+ } else
+ shost_printk(KERN_WARNING, phba->shost,
+ "In hwi_enable_intr, Not Enabled \n");
+ return true;
+}
+
+static void hwi_disable_intr(struct beiscsi_hba *phba)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+
+ u8 __iomem *addr = ctrl->pcicfg + PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET;
+ u32 reg = ioread32(addr);
+
+ u32 enabled = reg & MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+ if (enabled) {
+ reg &= ~MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK;
+ iowrite32(reg, addr);
+ } else
+ shost_printk(KERN_WARNING, phba->shost,
+ "In hwi_disable_intr, Already Disabled \n");
+}
+
+static int beiscsi_init_port(struct beiscsi_hba *phba)
+{
+ int ret;
+
+ ret = beiscsi_init_controller(phba);
+ if (ret < 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "beiscsi_dev_probe - Failed in"
+ "beiscsi_init_controller \n");
+ return ret;
+ }
+ ret = beiscsi_init_sgl_handle(phba);
+ if (ret < 0) {
+ shost_printk(KERN_ERR, phba->shost,
+ "beiscsi_dev_probe - Failed in"
+ "beiscsi_init_sgl_handle \n");
+ goto do_cleanup_ctrlr;
+ }
+
+ if (hba_setup_cid_tbls(phba)) {
+ shost_printk(KERN_ERR, phba->shost,
+ "Failed in hba_setup_cid_tbls\n");
+ kfree(phba->io_sgl_hndl_base);
+ kfree(phba->eh_sgl_hndl_base);
+ goto do_cleanup_ctrlr;
+ }
+
+ return ret;
+
+do_cleanup_ctrlr:
+ hwi_cleanup(phba);
+ return ret;
+}
+
+static void hwi_purge_eq(struct beiscsi_hba *phba)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ struct be_queue_info *eq;
+ struct be_eq_entry *eqe = NULL;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+ eq = &phwi_context->be_eq.q;
+ eqe = queue_tail_node(eq);
+
+ while (eqe->dw[offsetof(struct amap_eq_entry, valid) / 32]
+ & EQE_VALID_MASK) {
+ AMAP_SET_BITS(struct amap_eq_entry, valid, eqe, 0);
+ queue_tail_inc(eq);
+ eqe = queue_tail_node(eq);
+ }
+}
+
+static void beiscsi_clean_port(struct beiscsi_hba *phba)
+{
+ unsigned char mgmt_status;
+
+ mgmt_status = mgmt_epfw_cleanup(phba, CMD_CONNECTION_CHUTE_0);
+ if (mgmt_status)
+ shost_printk(KERN_WARNING, phba->shost,
+ "mgmt_epfw_cleanup FAILED \n");
+ hwi_cleanup(phba);
+ hwi_purge_eq(phba);
+ kfree(phba->io_sgl_hndl_base);
+ kfree(phba->eh_sgl_hndl_base);
+ kfree(phba->cid_array);
+ kfree(phba->ep_array);
+}
+
+void
+beiscsi_offload_connection(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_offload_params *params)
+{
+ struct wrb_handle *pwrb_handle;
+ struct iscsi_target_context_update_wrb *pwrb = NULL;
+ struct be_mem_descriptor *mem_descr;
+ struct beiscsi_hba *phba = beiscsi_conn->phba;
+ u32 doorbell = 0;
+
+ /*
+ * We can always use 0 here because it is reserved by libiscsi for
+ * login/startup related tasks.
+ */
+ pwrb_handle = alloc_wrb_handle(phba, beiscsi_conn->beiscsi_conn_cid, 0);
+ pwrb = (struct iscsi_target_context_update_wrb *)pwrb_handle->pwrb;
+ memset(pwrb, 0, sizeof(*pwrb));
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+ max_burst_length, pwrb, params->dw[offsetof
+ (struct amap_beiscsi_offload_params,
+ max_burst_length) / 32]);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+ max_send_data_segment_length, pwrb,
+ params->dw[offsetof(struct amap_beiscsi_offload_params,
+ max_send_data_segment_length) / 32]);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+ first_burst_length,
+ pwrb,
+ params->dw[offsetof(struct amap_beiscsi_offload_params,
+ first_burst_length) / 32]);
+
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, erl, pwrb,
+ (params->dw[offsetof(struct amap_beiscsi_offload_params,
+ erl) / 32] & OFFLD_PARAMS_ERL));
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, dde, pwrb,
+ (params->dw[offsetof(struct amap_beiscsi_offload_params,
+ dde) / 32] & OFFLD_PARAMS_DDE) >> 2);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, hde, pwrb,
+ (params->dw[offsetof(struct amap_beiscsi_offload_params,
+ hde) / 32] & OFFLD_PARAMS_HDE) >> 3);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ir2t, pwrb,
+ (params->dw[offsetof(struct amap_beiscsi_offload_params,
+ ir2t) / 32] & OFFLD_PARAMS_IR2T) >> 4);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, imd, pwrb,
+ (params->dw[offsetof(struct amap_beiscsi_offload_params,
+ imd) / 32] & OFFLD_PARAMS_IMD) >> 5);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, stat_sn,
+ pwrb,
+ (params->dw[offsetof(struct amap_beiscsi_offload_params,
+ exp_statsn) / 32] + 1));
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, type, pwrb,
+ 0x7);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, wrb_idx,
+ pwrb, pwrb_handle->wrb_index);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, ptr2nextwrb,
+ pwrb, pwrb_handle->nxt_wrb_index);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+ session_state, pwrb, 0);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, compltonack,
+ pwrb, 1);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, notpredblq,
+ pwrb, 0);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb, mode, pwrb,
+ 0);
+
+ mem_descr = phba->init_mem;
+ mem_descr += ISCSI_MEM_GLOBAL_HEADER;
+
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+ pad_buffer_addr_hi, pwrb,
+ mem_descr->mem_array[0].bus_address.u.a32.address_hi);
+ AMAP_SET_BITS(struct amap_iscsi_target_context_update_wrb,
+ pad_buffer_addr_lo, pwrb,
+ mem_descr->mem_array[0].bus_address.u.a32.address_lo);
+
+ be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_target_context_update_wrb));
+
+ doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
+ doorbell |= (pwrb_handle->wrb_index & DB_DEF_PDU_WRB_INDEX_MASK) <<
+ DB_DEF_PDU_WRB_INDEX_SHIFT;
+ doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
+
+ iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
+}
+
+static void beiscsi_parse_pdu(struct iscsi_conn *conn, itt_t itt,
+ int *index, int *age)
+{
+ *index = be32_to_cpu(itt) >> 16;
+ if (age)
+ *age = conn->session->age;
+}
+
+/**
+ * beiscsi_alloc_pdu - allocates pdu and related resources
+ * @task: libiscsi task
+ * @opcode: opcode of pdu for task
+ *
+ * This is called with the session lock held. It will allocate
+ * the wrb and sgl if needed for the command. And it will prep
+ * the pdu's itt. beiscsi_parse_pdu will later translate
+ * the pdu itt to the libiscsi task itt.
+ */
+static int beiscsi_alloc_pdu(struct iscsi_task *task, uint8_t opcode)
+{
+ struct beiscsi_io_task *io_task = task->dd_data;
+ struct iscsi_conn *conn = task->conn;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ struct beiscsi_hba *phba = beiscsi_conn->phba;
+ struct hwi_wrb_context *pwrb_context;
+ struct hwi_controller *phwi_ctrlr;
+ itt_t itt;
+ struct beiscsi_session *beiscsi_sess = beiscsi_conn->beiscsi_sess;
+ dma_addr_t paddr;
+
+ io_task->cmd_bhs = pci_pool_alloc(beiscsi_sess->bhs_pool,
+ GFP_KERNEL, &paddr);
+
+ if (!io_task->cmd_bhs)
+ return -ENOMEM;
+
+ io_task->bhs_pa.u.a64.address = paddr;
+ io_task->pwrb_handle = alloc_wrb_handle(phba,
+ beiscsi_conn->beiscsi_conn_cid,
+ task->itt);
+ io_task->pwrb_handle->pio_handle = task;
+ io_task->conn = beiscsi_conn;
+
+ task->hdr = (struct iscsi_hdr *)&io_task->cmd_bhs->iscsi_hdr;
+ task->hdr_max = sizeof(struct be_cmd_bhs);
+
+ if (task->sc) {
+ spin_lock(&phba->io_sgl_lock);
+ io_task->psgl_handle = alloc_io_sgl_handle(phba);
+ spin_unlock(&phba->io_sgl_lock);
+ if (!io_task->psgl_handle)
+ goto free_hndls;
+
+ } else {
+ io_task->scsi_cmnd = NULL;
+ if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN) {
+ if (!beiscsi_conn->login_in_progress) {
+ spin_lock(&phba->mgmt_sgl_lock);
+ io_task->psgl_handle = (struct sgl_handle *)
+ alloc_mgmt_sgl_handle(phba);
+ spin_unlock(&phba->mgmt_sgl_lock);
+ if (!io_task->psgl_handle)
+ goto free_hndls;
+
+ beiscsi_conn->login_in_progress = 1;
+ beiscsi_conn->plogin_sgl_handle =
+ io_task->psgl_handle;
+ } else {
+ io_task->psgl_handle =
+ beiscsi_conn->plogin_sgl_handle;
+ }
+ } else {
+ spin_lock(&phba->mgmt_sgl_lock);
+ io_task->psgl_handle = alloc_mgmt_sgl_handle(phba);
+ spin_unlock(&phba->mgmt_sgl_lock);
+ if (!io_task->psgl_handle)
+ goto free_hndls;
+ }
+ }
+ itt = (itt_t) cpu_to_be32(((unsigned int)task->itt << 16) |
+ (unsigned int)(io_task->psgl_handle->sgl_index));
+ io_task->cmd_bhs->iscsi_hdr.itt = itt;
+ return 0;
+
+free_hndls:
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pwrb_context = &phwi_ctrlr->wrb_context[beiscsi_conn->beiscsi_conn_cid];
+ free_wrb_handle(phba, pwrb_context, io_task->pwrb_handle);
+ io_task->pwrb_handle = NULL;
+ pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
+ io_task->bhs_pa.u.a64.address);
+ SE_DEBUG(DBG_LVL_1, "Alloc of SGL_ICD Failed \n");
+ return -ENOMEM;
+}
+
+static void beiscsi_cleanup_task(struct iscsi_task *task)
+{
+ struct beiscsi_io_task *io_task = task->dd_data;
+ struct iscsi_conn *conn = task->conn;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ struct beiscsi_hba *phba = beiscsi_conn->phba;
+ struct beiscsi_session *beiscsi_sess = beiscsi_conn->beiscsi_sess;
+ struct hwi_wrb_context *pwrb_context;
+ struct hwi_controller *phwi_ctrlr;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ pwrb_context = &phwi_ctrlr->wrb_context[beiscsi_conn->beiscsi_conn_cid];
+ if (io_task->pwrb_handle) {
+ free_wrb_handle(phba, pwrb_context, io_task->pwrb_handle);
+ io_task->pwrb_handle = NULL;
+ }
+
+ if (io_task->cmd_bhs) {
+ pci_pool_free(beiscsi_sess->bhs_pool, io_task->cmd_bhs,
+ io_task->bhs_pa.u.a64.address);
+ }
+
+ if (task->sc) {
+ if (io_task->psgl_handle) {
+ spin_lock(&phba->io_sgl_lock);
+ free_io_sgl_handle(phba, io_task->psgl_handle);
+ spin_unlock(&phba->io_sgl_lock);
+ io_task->psgl_handle = NULL;
+ }
+ } else {
+ if ((task->hdr->opcode & ISCSI_OPCODE_MASK) == ISCSI_OP_LOGIN)
+ return;
+ if (io_task->psgl_handle) {
+ spin_lock(&phba->mgmt_sgl_lock);
+ free_mgmt_sgl_handle(phba, io_task->psgl_handle);
+ spin_unlock(&phba->mgmt_sgl_lock);
+ io_task->psgl_handle = NULL;
+ }
+ }
+}
+
+static int beiscsi_iotask(struct iscsi_task *task, struct scatterlist *sg,
+ unsigned int num_sg, unsigned int xferlen,
+ unsigned int writedir)
+{
+
+ struct beiscsi_io_task *io_task = task->dd_data;
+ struct iscsi_conn *conn = task->conn;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ struct beiscsi_hba *phba = beiscsi_conn->phba;
+ struct iscsi_wrb *pwrb = NULL;
+ unsigned int doorbell = 0;
+
+ pwrb = io_task->pwrb_handle->pwrb;
+ io_task->cmd_bhs->iscsi_hdr.exp_statsn = 0;
+ io_task->bhs_len = sizeof(struct be_cmd_bhs);
+
+ if (writedir) {
+ SE_DEBUG(DBG_LVL_4, " WRITE Command \t");
+ memset(&io_task->cmd_bhs->iscsi_data_pdu, 0, 48);
+ AMAP_SET_BITS(struct amap_pdu_data_out, itt,
+ &io_task->cmd_bhs->iscsi_data_pdu,
+ (unsigned int)io_task->cmd_bhs->iscsi_hdr.itt);
+ AMAP_SET_BITS(struct amap_pdu_data_out, opcode,
+ &io_task->cmd_bhs->iscsi_data_pdu,
+ ISCSI_OPCODE_SCSI_DATA_OUT);
+ AMAP_SET_BITS(struct amap_pdu_data_out, final_bit,
+ &io_task->cmd_bhs->iscsi_data_pdu, 1);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_WR_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
+ } else {
+ SE_DEBUG(DBG_LVL_4, "READ Command \t");
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_RD_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 0);
+ }
+ memcpy(&io_task->cmd_bhs->iscsi_data_pdu.
+ dw[offsetof(struct amap_pdu_data_out, lun) / 32],
+ io_task->cmd_bhs->iscsi_hdr.lun, sizeof(struct scsi_lun));
+
+ AMAP_SET_BITS(struct amap_iscsi_wrb, lun, pwrb,
+ cpu_to_be16((unsigned short)io_task->cmd_bhs->iscsi_hdr.
+ lun[0]));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb, xferlen);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb,
+ io_task->pwrb_handle->wrb_index);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb,
+ be32_to_cpu(task->cmdsn));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb,
+ io_task->psgl_handle->sgl_index);
+
+ hwi_write_sgl(pwrb, sg, num_sg, io_task);
+
+ AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
+ io_task->pwrb_handle->nxt_wrb_index);
+ be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
+
+ doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
+ doorbell |= (io_task->pwrb_handle->wrb_index &
+ DB_DEF_PDU_WRB_INDEX_MASK) << DB_DEF_PDU_WRB_INDEX_SHIFT;
+ doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
+
+ iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
+ return 0;
+}
+
+static int beiscsi_mtask(struct iscsi_task *task)
+{
+ struct beiscsi_io_task *aborted_io_task, *io_task = task->dd_data;
+ struct iscsi_conn *conn = task->conn;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ struct beiscsi_hba *phba = beiscsi_conn->phba;
+ struct iscsi_wrb *pwrb = NULL;
+ unsigned int doorbell = 0;
+ struct iscsi_task *aborted_task;
+
+ pwrb = io_task->pwrb_handle->pwrb;
+ AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb,
+ be32_to_cpu(task->cmdsn));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, wrb_idx, pwrb,
+ io_task->pwrb_handle->wrb_index);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, sgl_icd_idx, pwrb,
+ io_task->psgl_handle->sgl_index);
+
+ switch (task->hdr->opcode & ISCSI_OPCODE_MASK) {
+ case ISCSI_OP_LOGIN:
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, TGT_DM_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, cmdsn_itt, pwrb, 1);
+ hwi_write_buffer(pwrb, task);
+ break;
+ case ISCSI_OP_NOOP_OUT:
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_RD_CMD);
+ hwi_write_buffer(pwrb, task);
+ break;
+ case ISCSI_OP_TEXT:
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_WR_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dsp, pwrb, 1);
+ hwi_write_buffer(pwrb, task);
+ break;
+ case ISCSI_OP_SCSI_TMFUNC:
+ aborted_task = iscsi_itt_to_task(conn,
+ ((struct iscsi_tm *)task->hdr)->rtt);
+ if (!aborted_task)
+ return 0;
+ aborted_io_task = aborted_task->dd_data;
+ if (!aborted_io_task->scsi_cmnd)
+ return 0;
+
+ mgmt_invalidate_icds(phba,
+ aborted_io_task->psgl_handle->sgl_index,
+ beiscsi_conn->beiscsi_conn_cid);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb, INI_TMF_CMD);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+ hwi_write_buffer(pwrb, task);
+ break;
+ case ISCSI_OP_LOGOUT:
+ AMAP_SET_BITS(struct amap_iscsi_wrb, dmsg, pwrb, 0);
+ AMAP_SET_BITS(struct amap_iscsi_wrb, type, pwrb,
+ HWH_TYPE_LOGOUT);
+ hwi_write_buffer(pwrb, task);
+ break;
+
+ default:
+ SE_DEBUG(DBG_LVL_1, "opcode =%d Not supported \n",
+ task->hdr->opcode & ISCSI_OPCODE_MASK);
+ return -EINVAL;
+ }
+
+ AMAP_SET_BITS(struct amap_iscsi_wrb, r2t_exp_dtl, pwrb,
+ be32_to_cpu(task->data_count));
+ AMAP_SET_BITS(struct amap_iscsi_wrb, ptr2nextwrb, pwrb,
+ io_task->pwrb_handle->nxt_wrb_index);
+ be_dws_le_to_cpu(pwrb, sizeof(struct iscsi_wrb));
+
+ doorbell |= beiscsi_conn->beiscsi_conn_cid & DB_WRB_POST_CID_MASK;
+ doorbell |= (io_task->pwrb_handle->wrb_index &
+ DB_DEF_PDU_WRB_INDEX_MASK) << DB_DEF_PDU_WRB_INDEX_SHIFT;
+ doorbell |= 1 << DB_DEF_PDU_NUM_POSTED_SHIFT;
+ iowrite32(doorbell, phba->db_va + DB_TXULP0_OFFSET);
+ return 0;
+}
+
+static int beiscsi_task_xmit(struct iscsi_task *task)
+{
+ struct iscsi_conn *conn = task->conn;
+ struct beiscsi_io_task *io_task = task->dd_data;
+ struct scsi_cmnd *sc = task->sc;
+ struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+ struct scatterlist *sg;
+ int num_sg;
+ unsigned int writedir = 0, xferlen = 0;
+
+ SE_DEBUG(DBG_LVL_4, "\n cid=%d In beiscsi_task_xmit task=%p conn=%p \t"
+ "beiscsi_conn=%p \n", beiscsi_conn->beiscsi_conn_cid,
+ task, conn, beiscsi_conn);
+ if (!sc)
+ return beiscsi_mtask(task);
+
+ io_task->scsi_cmnd = sc;
+ num_sg = scsi_dma_map(sc);
+ if (num_sg < 0) {
+ SE_DEBUG(DBG_LVL_1, " scsi_dma_map Failed\n")
+ return num_sg;
+ }
+ SE_DEBUG(DBG_LVL_4, "xferlen=0x%08x scmd=%p num_sg=%d sernum=%lu\n",
+ (scsi_bufflen(sc)), sc, num_sg, sc->serial_number);
+ xferlen = scsi_bufflen(sc);
+ sg = scsi_sglist(sc);
+ if (sc->sc_data_direction == DMA_TO_DEVICE) {
+ writedir = 1;
+ SE_DEBUG(DBG_LVL_4, "task->imm_count=0x%08x \n",
+ task->imm_count);
+ } else
+ writedir = 0;
+ return beiscsi_iotask(task, sg, num_sg, xferlen, writedir);
+}
+
+static void beiscsi_remove(struct pci_dev *pcidev)
+{
+ struct beiscsi_hba *phba = NULL;
+
+ phba = (struct beiscsi_hba *)pci_get_drvdata(pcidev);
+ if (!phba) {
+ dev_err(&pcidev->dev, "beiscsi_remove called with no phba \n");
+ return;
+ }
+
+ hwi_disable_intr(phba);
+ if (phba->pcidev->irq)
+ free_irq(phba->pcidev->irq, phba);
+ destroy_workqueue(phba->wq);
+ if (blk_iopoll_enabled)
+ blk_iopoll_disable(&phba->iopoll);
+
+ beiscsi_clean_port(phba);
+ beiscsi_free_mem(phba);
+ beiscsi_unmap_pci_function(phba);
+ pci_free_consistent(phba->pcidev,
+ phba->ctrl.mbox_mem_alloced.size,
+ phba->ctrl.mbox_mem_alloced.va,
+ phba->ctrl.mbox_mem_alloced.dma);
+ iscsi_host_remove(phba->shost);
+ pci_dev_put(phba->pcidev);
+ iscsi_host_free(phba->shost);
+}
+
+static int __devinit beiscsi_dev_probe(struct pci_dev *pcidev,
+ const struct pci_device_id *id)
+{
+ struct beiscsi_hba *phba = NULL;
+ int ret;
+
+ ret = beiscsi_enable_pci(pcidev);
+ if (ret < 0) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+ "Failed to enable pci device \n");
+ return ret;
+ }
+
+ phba = beiscsi_hba_alloc(pcidev);
+ if (!phba) {
+ dev_err(&pcidev->dev, "beiscsi_dev_probe-"
+ " Failed in beiscsi_hba_alloc \n");
+ goto disable_pci;
+ }
+
+ pci_set_drvdata(pcidev, phba);
+ ret = be_ctrl_init(phba, pcidev);
+ if (ret) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+ "Failed in be_ctrl_init\n");
+ goto hba_free;
+ }
+
+ spin_lock_init(&phba->io_sgl_lock);
+ spin_lock_init(&phba->mgmt_sgl_lock);
+ spin_lock_init(&phba->isr_lock);
+ beiscsi_get_params(phba);
+ ret = beiscsi_init_port(phba);
+ if (ret < 0) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+ "Failed in beiscsi_init_port\n");
+ goto free_port;
+ }
+
+ snprintf(phba->wq_name, sizeof(phba->wq_name), "beiscsi_q_irq%u",
+ phba->shost->host_no);
+ phba->wq = create_singlethread_workqueue(phba->wq_name);
+ if (!phba->wq) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+ "Failed to allocate work queue\n");
+ goto free_twq;
+ }
+
+ INIT_WORK(&phba->work_cqs, beiscsi_process_all_cqs);
+
+ if (blk_iopoll_enabled) {
+ blk_iopoll_init(&phba->iopoll, be_iopoll_budget, be_iopoll);
+ blk_iopoll_enable(&phba->iopoll);
+ }
+
+ ret = beiscsi_init_irqs(phba);
+ if (ret < 0) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+ "Failed to beiscsi_init_irqs\n");
+ goto free_blkenbld;
+ }
+ ret = hwi_enable_intr(phba);
+ if (ret < 0) {
+ shost_printk(KERN_ERR, phba->shost, "beiscsi_dev_probe-"
+ "Failed to hwi_enable_intr\n");
+ goto free_ctrlr;
+ }
+
+ SE_DEBUG(DBG_LVL_8, "\n\n\n SUCCESS - DRIVER LOADED \n\n\n");
+ return 0;
+
+free_ctrlr:
+ if (phba->pcidev->irq)
+ free_irq(phba->pcidev->irq, phba);
+free_blkenbld:
+ destroy_workqueue(phba->wq);
+ if (blk_iopoll_enabled)
+ blk_iopoll_disable(&phba->iopoll);
+free_twq:
+ beiscsi_clean_port(phba);
+ beiscsi_free_mem(phba);
+free_port:
+ pci_free_consistent(phba->pcidev,
+ phba->ctrl.mbox_mem_alloced.size,
+ phba->ctrl.mbox_mem_alloced.va,
+ phba->ctrl.mbox_mem_alloced.dma);
+ beiscsi_unmap_pci_function(phba);
+hba_free:
+ iscsi_host_remove(phba->shost);
+ pci_dev_put(phba->pcidev);
+ iscsi_host_free(phba->shost);
+disable_pci:
+ pci_disable_device(pcidev);
+ return ret;
+}
+
+struct iscsi_transport beiscsi_iscsi_transport = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ .caps = CAP_RECOVERY_L0 | CAP_HDRDGST |
+ CAP_MULTI_R2T | CAP_DATADGST | CAP_DATA_PATH_OFFLOAD,
+ .param_mask = ISCSI_MAX_RECV_DLENGTH |
+ ISCSI_MAX_XMIT_DLENGTH |
+ ISCSI_HDRDGST_EN |
+ ISCSI_DATADGST_EN |
+ ISCSI_INITIAL_R2T_EN |
+ ISCSI_MAX_R2T |
+ ISCSI_IMM_DATA_EN |
+ ISCSI_FIRST_BURST |
+ ISCSI_MAX_BURST |
+ ISCSI_PDU_INORDER_EN |
+ ISCSI_DATASEQ_INORDER_EN |
+ ISCSI_ERL |
+ ISCSI_CONN_PORT |
+ ISCSI_CONN_ADDRESS |
+ ISCSI_EXP_STATSN |
+ ISCSI_PERSISTENT_PORT |
+ ISCSI_PERSISTENT_ADDRESS |
+ ISCSI_TARGET_NAME | ISCSI_TPGT |
+ ISCSI_USERNAME | ISCSI_PASSWORD |
+ ISCSI_USERNAME_IN | ISCSI_PASSWORD_IN |
+ ISCSI_FAST_ABORT | ISCSI_ABORT_TMO |
+ ISCSI_LU_RESET_TMO |
+ ISCSI_PING_TMO | ISCSI_RECV_TMO |
+ ISCSI_IFACE_NAME | ISCSI_INITIATOR_NAME,
+ .host_param_mask = ISCSI_HOST_HWADDRESS | ISCSI_HOST_IPADDRESS |
+ ISCSI_HOST_INITIATOR_NAME,
+ .create_session = beiscsi_session_create,
+ .destroy_session = beiscsi_session_destroy,
+ .create_conn = beiscsi_conn_create,
+ .bind_conn = beiscsi_conn_bind,
+ .destroy_conn = iscsi_conn_teardown,
+ .set_param = beiscsi_set_param,
+ .get_conn_param = beiscsi_conn_get_param,
+ .get_session_param = iscsi_session_get_param,
+ .get_host_param = beiscsi_get_host_param,
+ .start_conn = beiscsi_conn_start,
+ .stop_conn = beiscsi_conn_stop,
+ .send_pdu = iscsi_conn_send_pdu,
+ .xmit_task = beiscsi_task_xmit,
+ .cleanup_task = beiscsi_cleanup_task,
+ .alloc_pdu = beiscsi_alloc_pdu,
+ .parse_pdu_itt = beiscsi_parse_pdu,
+ .get_stats = beiscsi_conn_get_stats,
+ .ep_connect = beiscsi_ep_connect,
+ .ep_poll = beiscsi_ep_poll,
+ .ep_disconnect = beiscsi_ep_disconnect,
+ .session_recovery_timedout = iscsi_session_recovery_timedout,
+};
+
+static struct pci_driver beiscsi_pci_driver = {
+ .name = DRV_NAME,
+ .probe = beiscsi_dev_probe,
+ .remove = beiscsi_remove,
+ .id_table = beiscsi_pci_id_table
+};
+
+static int __init beiscsi_module_init(void)
+{
+ int ret;
+
+ beiscsi_scsi_transport =
+ iscsi_register_transport(&beiscsi_iscsi_transport);
+ if (!beiscsi_scsi_transport) {
+ SE_DEBUG(DBG_LVL_1,
+ "beiscsi_module_init - Unable to register beiscsi"
+ "transport.\n");
+ ret = -ENOMEM;
+ }
+ SE_DEBUG(DBG_LVL_8, "In beiscsi_module_init, tt=%p \n",
+ &beiscsi_iscsi_transport);
+
+ ret = pci_register_driver(&beiscsi_pci_driver);
+ if (ret) {
+ SE_DEBUG(DBG_LVL_1,
+ "beiscsi_module_init - Unable to register"
+ "beiscsi pci driver.\n");
+ goto unregister_iscsi_transport;
+ }
+ return 0;
+
+unregister_iscsi_transport:
+ iscsi_unregister_transport(&beiscsi_iscsi_transport);
+ return ret;
+}
+
+static void __exit beiscsi_module_exit(void)
+{
+ pci_unregister_driver(&beiscsi_pci_driver);
+ iscsi_unregister_transport(&beiscsi_iscsi_transport);
+}
+
+module_init(beiscsi_module_init);
+module_exit(beiscsi_module_exit);
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#ifndef _BEISCSI_MAIN_
+#define _BEISCSI_MAIN_
+
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/in.h>
+#include <linux/blk-iopoll.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/iscsi_proto.h>
+#include <scsi/libiscsi.h>
+#include <scsi/scsi_transport_iscsi.h>
+
+#include "be.h"
+
+
+
+#define DRV_NAME "be2iscsi"
+#define BUILD_STR "2.0.527.0"
+
+#define BE_NAME "ServerEngines BladeEngine2" \
+ "Linux iSCSI Driver version" BUILD_STR
+#define DRV_DESC BE_NAME " " "Driver"
+
+#define BE_VENDOR_ID 0x19A2
+#define BE_DEVICE_ID1 0x212
+#define OC_DEVICE_ID1 0x702
+#define OC_DEVICE_ID2 0x703
+
+#define BE2_MAX_SESSIONS 64
+#define BE2_CMDS_PER_CXN 128
+#define BE2_LOGOUTS BE2_MAX_SESSIONS
+#define BE2_TMFS 16
+#define BE2_NOPOUT_REQ 16
+#define BE2_ASYNCPDUS BE2_MAX_SESSIONS
+#define BE2_MAX_ICDS 2048
+#define BE2_SGE 32
+#define BE2_DEFPDU_HDR_SZ 64
+#define BE2_DEFPDU_DATA_SZ 8192
+#define BE2_IO_DEPTH \
+ (BE2_MAX_ICDS / 2 - (BE2_LOGOUTS + BE2_TMFS + BE2_NOPOUT_REQ))
+
+#define BEISCSI_SGLIST_ELEMENTS BE2_SGE
+
+#define BEISCSI_MAX_CMNDS 1024 /* Max IO's per Ctrlr sht->can_queue */
+#define BEISCSI_CMD_PER_LUN 128 /* scsi_host->cmd_per_lun */
+#define BEISCSI_MAX_SECTORS 2048 /* scsi_host->max_sectors */
+
+#define BEISCSI_MAX_CMD_LEN 16 /* scsi_host->max_cmd_len */
+#define BEISCSI_NUM_MAX_LUN 256 /* scsi_host->max_lun */
+#define BEISCSI_NUM_DEVICES_SUPPORTED 0x01
+#define BEISCSI_MAX_FRAGS_INIT 192
+#define BE_NUM_MSIX_ENTRIES 1
+#define MPU_EP_SEMAPHORE 0xac
+
+#define BE_SENSE_INFO_SIZE 258
+#define BE_ISCSI_PDU_HEADER_SIZE 64
+#define BE_MIN_MEM_SIZE 16384
+
+#define IIOC_SCSI_DATA 0x05 /* Write Operation */
+
+#define DBG_LVL 0x00000001
+#define DBG_LVL_1 0x00000001
+#define DBG_LVL_2 0x00000002
+#define DBG_LVL_3 0x00000004
+#define DBG_LVL_4 0x00000008
+#define DBG_LVL_5 0x00000010
+#define DBG_LVL_6 0x00000020
+#define DBG_LVL_7 0x00000040
+#define DBG_LVL_8 0x00000080
+
+#define SE_DEBUG(debug_mask, fmt, args...) \
+do { \
+ if (debug_mask & DBG_LVL) { \
+ printk(KERN_ERR "(%s():%d):", __func__, __LINE__);\
+ printk(fmt, ##args); \
+ } \
+} while (0);
+
+/**
+ * hardware needs the async PDU buffers to be posted in multiples of 8
+ * So have atleast 8 of them by default
+ */
+
+#define HWI_GET_ASYNC_PDU_CTX(phwi) (phwi->phwi_ctxt->pasync_ctx)
+
+/********* Memory BAR register ************/
+#define PCICFG_MEMBAR_CTRL_INT_CTRL_OFFSET 0xfc
+/**
+ * Host Interrupt Enable, if set interrupts are enabled although "PCI Interrupt
+ * Disable" may still globally block interrupts in addition to individual
+ * interrupt masks; a mechanism for the device driver to block all interrupts
+ * atomically without having to arbitrate for the PCI Interrupt Disable bit
+ * with the OS.
+ */
+#define MEMBAR_CTRL_INT_CTRL_HOSTINTR_MASK (1 << 29) /* bit 29 */
+
+/********* ISR0 Register offset **********/
+#define CEV_ISR0_OFFSET 0xC18
+#define CEV_ISR_SIZE 4
+
+/**
+ * Macros for reading/writing a protection domain or CSR registers
+ * in BladeEngine.
+ */
+
+#define DB_TXULP0_OFFSET 0x40
+#define DB_RXULP0_OFFSET 0xA0
+/********* Event Q door bell *************/
+#define DB_EQ_OFFSET DB_CQ_OFFSET
+#define DB_EQ_RING_ID_MASK 0x1FF /* bits 0 - 8 */
+/* Clear the interrupt for this eq */
+#define DB_EQ_CLR_SHIFT (9) /* bit 9 */
+/* Must be 1 */
+#define DB_EQ_EVNT_SHIFT (10) /* bit 10 */
+/* Number of event entries processed */
+#define DB_EQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
+/* Rearm bit */
+#define DB_EQ_REARM_SHIFT (29) /* bit 29 */
+
+/********* Compl Q door bell *************/
+#define DB_CQ_OFFSET 0x120
+#define DB_CQ_RING_ID_MASK 0x3FF /* bits 0 - 9 */
+/* Number of event entries processed */
+#define DB_CQ_NUM_POPPED_SHIFT (16) /* bits 16 - 28 */
+/* Rearm bit */
+#define DB_CQ_REARM_SHIFT (29) /* bit 29 */
+
+#define GET_HWI_CONTROLLER_WS(pc) (pc->phwi_ctrlr)
+#define HWI_GET_DEF_BUFQ_ID(pc) (((struct hwi_controller *)\
+ (GET_HWI_CONTROLLER_WS(pc)))->default_pdu_data.id)
+#define HWI_GET_DEF_HDRQ_ID(pc) (((struct hwi_controller *)\
+ (GET_HWI_CONTROLLER_WS(pc)))->default_pdu_hdr.id)
+
+#define PAGES_REQUIRED(x) \
+ ((x < PAGE_SIZE) ? 1 : ((x + PAGE_SIZE - 1) / PAGE_SIZE))
+
+enum be_mem_enum {
+ HWI_MEM_ADDN_CONTEXT,
+ HWI_MEM_CQ,
+ HWI_MEM_EQ,
+ HWI_MEM_WRB,
+ HWI_MEM_WRBH,
+ HWI_MEM_SGLH, /* 5 */
+ HWI_MEM_SGE,
+ HWI_MEM_ASYNC_HEADER_BUF,
+ HWI_MEM_ASYNC_DATA_BUF,
+ HWI_MEM_ASYNC_HEADER_RING,
+ HWI_MEM_ASYNC_DATA_RING, /* 10 */
+ HWI_MEM_ASYNC_HEADER_HANDLE,
+ HWI_MEM_ASYNC_DATA_HANDLE,
+ HWI_MEM_ASYNC_PDU_CONTEXT,
+ ISCSI_MEM_GLOBAL_HEADER,
+ SE_MEM_MAX /* 15 */
+};
+
+struct be_bus_address32 {
+ unsigned int address_lo;
+ unsigned int address_hi;
+};
+
+struct be_bus_address64 {
+ unsigned long long address;
+};
+
+struct be_bus_address {
+ union {
+ struct be_bus_address32 a32;
+ struct be_bus_address64 a64;
+ } u;
+};
+
+struct mem_array {
+ struct be_bus_address bus_address; /* Bus address of location */
+ void *virtual_address; /* virtual address to the location */
+ unsigned int size; /* Size required by memory block */
+};
+
+struct be_mem_descriptor {
+ unsigned int index; /* Index of this memory parameter */
+ unsigned int category; /* type indicates cached/non-cached */
+ unsigned int num_elements; /* number of elements in this
+ * descriptor
+ */
+ unsigned int alignment_mask; /* Alignment mask for this block */
+ unsigned int size_in_bytes; /* Size required by memory block */
+ struct mem_array *mem_array;
+};
+
+struct sgl_handle {
+ unsigned int sgl_index;
+ struct iscsi_sge *pfrag;
+};
+
+struct hba_parameters {
+ unsigned int ios_per_ctrl;
+ unsigned int cxns_per_ctrl;
+ unsigned int asyncpdus_per_ctrl;
+ unsigned int icds_per_ctrl;
+ unsigned int num_sge_per_io;
+ unsigned int defpdu_hdr_sz;
+ unsigned int defpdu_data_sz;
+ unsigned int num_cq_entries;
+ unsigned int num_eq_entries;
+ unsigned int wrbs_per_cxn;
+ unsigned int crashmode;
+ unsigned int hba_num;
+
+ unsigned int mgmt_ws_sz;
+ unsigned int hwi_ws_sz;
+
+ unsigned int eto;
+ unsigned int ldto;
+
+ unsigned int dbg_flags;
+ unsigned int num_cxn;
+
+ unsigned int eq_timer;
+ /**
+ * These are calculated from other params. They're here
+ * for debug purposes
+ */
+ unsigned int num_mcc_pages;
+ unsigned int num_mcc_cq_pages;
+ unsigned int num_cq_pages;
+ unsigned int num_eq_pages;
+
+ unsigned int num_async_pdu_buf_pages;
+ unsigned int num_async_pdu_buf_sgl_pages;
+ unsigned int num_async_pdu_buf_cq_pages;
+
+ unsigned int num_async_pdu_hdr_pages;
+ unsigned int num_async_pdu_hdr_sgl_pages;
+ unsigned int num_async_pdu_hdr_cq_pages;
+
+ unsigned int num_sge;
+};
+
+struct beiscsi_hba {
+ struct hba_parameters params;
+ struct hwi_controller *phwi_ctrlr;
+ unsigned int mem_req[SE_MEM_MAX];
+ /* PCI BAR mapped addresses */
+ u8 __iomem *csr_va; /* CSR */
+ u8 __iomem *db_va; /* Door Bell */
+ u8 __iomem *pci_va; /* PCI Config */
+ struct be_bus_address csr_pa; /* CSR */
+ struct be_bus_address db_pa; /* CSR */
+ struct be_bus_address pci_pa; /* CSR */
+ /* PCI representation of our HBA */
+ struct pci_dev *pcidev;
+ unsigned int state;
+ unsigned short asic_revision;
+ struct blk_iopoll iopoll;
+ struct be_mem_descriptor *init_mem;
+
+ unsigned short io_sgl_alloc_index;
+ unsigned short io_sgl_free_index;
+ unsigned short io_sgl_hndl_avbl;
+ struct sgl_handle **io_sgl_hndl_base;
+
+ unsigned short eh_sgl_alloc_index;
+ unsigned short eh_sgl_free_index;
+ unsigned short eh_sgl_hndl_avbl;
+ struct sgl_handle **eh_sgl_hndl_base;
+ spinlock_t io_sgl_lock;
+ spinlock_t mgmt_sgl_lock;
+ spinlock_t isr_lock;
+ unsigned int age;
+ unsigned short avlbl_cids;
+ unsigned short cid_alloc;
+ unsigned short cid_free;
+ struct beiscsi_conn *conn_table[BE2_MAX_SESSIONS * 2];
+ struct list_head hba_queue;
+ unsigned short *cid_array;
+ struct iscsi_endpoint **ep_array;
+ struct Scsi_Host *shost;
+ struct {
+ /**
+ * group together since they are used most frequently
+ * for cid to cri conversion
+ */
+ unsigned int iscsi_cid_start;
+ unsigned int phys_port;
+
+ unsigned int isr_offset;
+ unsigned int iscsi_icd_start;
+ unsigned int iscsi_cid_count;
+ unsigned int iscsi_icd_count;
+ unsigned int pci_function;
+
+ unsigned short cid_alloc;
+ unsigned short cid_free;
+ unsigned short avlbl_cids;
+ spinlock_t cid_lock;
+ } fw_config;
+
+ u8 mac_address[ETH_ALEN];
+ unsigned short todo_cq;
+ unsigned short todo_mcc_cq;
+ char wq_name[20];
+ struct workqueue_struct *wq; /* The actuak work queue */
+ struct work_struct work_cqs; /* The work being queued */
+ struct be_ctrl_info ctrl;
+};
+
+struct beiscsi_session {
+ struct pci_pool *bhs_pool;
+};
+
+/**
+ * struct beiscsi_conn - iscsi connection structure
+ */
+struct beiscsi_conn {
+ struct iscsi_conn *conn;
+ struct beiscsi_hba *phba;
+ u32 exp_statsn;
+ u32 beiscsi_conn_cid;
+ struct beiscsi_endpoint *ep;
+ unsigned short login_in_progress;
+ struct sgl_handle *plogin_sgl_handle;
+ struct beiscsi_session *beiscsi_sess;
+};
+
+/* This structure is used by the chip */
+struct pdu_data_out {
+ u32 dw[12];
+};
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_pdu_data_out {
+ u8 opcode[6]; /* opcode */
+ u8 rsvd0[2]; /* should be 0 */
+ u8 rsvd1[7];
+ u8 final_bit; /* F bit */
+ u8 rsvd2[16];
+ u8 ahs_length[8]; /* no AHS */
+ u8 data_len_hi[8];
+ u8 data_len_lo[16]; /* DataSegmentLength */
+ u8 lun[64];
+ u8 itt[32]; /* ITT; initiator task tag */
+ u8 ttt[32]; /* TTT; valid for R2T or 0xffffffff */
+ u8 rsvd3[32];
+ u8 exp_stat_sn[32];
+ u8 rsvd4[32];
+ u8 data_sn[32];
+ u8 buffer_offset[32];
+ u8 rsvd5[32];
+};
+
+struct be_cmd_bhs {
+ struct iscsi_cmd iscsi_hdr;
+ unsigned char pad1[16];
+ struct pdu_data_out iscsi_data_pdu;
+ unsigned char pad2[BE_SENSE_INFO_SIZE -
+ sizeof(struct pdu_data_out)];
+};
+
+struct beiscsi_io_task {
+ struct wrb_handle *pwrb_handle;
+ struct sgl_handle *psgl_handle;
+ struct beiscsi_conn *conn;
+ struct scsi_cmnd *scsi_cmnd;
+ unsigned int cmd_sn;
+ unsigned int flags;
+ unsigned short cid;
+ unsigned short header_len;
+
+ struct be_cmd_bhs *cmd_bhs;
+ struct be_bus_address bhs_pa;
+ unsigned short bhs_len;
+};
+
+struct be_nonio_bhs {
+ struct iscsi_hdr iscsi_hdr;
+ unsigned char pad1[16];
+ struct pdu_data_out iscsi_data_pdu;
+ unsigned char pad2[BE_SENSE_INFO_SIZE -
+ sizeof(struct pdu_data_out)];
+};
+
+struct be_status_bhs {
+ struct iscsi_cmd iscsi_hdr;
+ unsigned char pad1[16];
+ /**
+ * The plus 2 below is to hold the sense info length that gets
+ * DMA'ed by RxULP
+ */
+ unsigned char sense_info[BE_SENSE_INFO_SIZE];
+};
+
+struct iscsi_sge {
+ u32 dw[4];
+};
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_iscsi_sge {
+ u8 addr_hi[32];
+ u8 addr_lo[32];
+ u8 sge_offset[22]; /* DWORD 2 */
+ u8 rsvd0[9]; /* DWORD 2 */
+ u8 last_sge; /* DWORD 2 */
+ u8 len[17]; /* DWORD 3 */
+ u8 rsvd1[15]; /* DWORD 3 */
+};
+
+struct beiscsi_offload_params {
+ u32 dw[5];
+};
+
+#define OFFLD_PARAMS_ERL 0x00000003
+#define OFFLD_PARAMS_DDE 0x00000004
+#define OFFLD_PARAMS_HDE 0x00000008
+#define OFFLD_PARAMS_IR2T 0x00000010
+#define OFFLD_PARAMS_IMD 0x00000020
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_beiscsi_offload_params {
+ u8 max_burst_length[32];
+ u8 max_send_data_segment_length[32];
+ u8 first_burst_length[32];
+ u8 erl[2];
+ u8 dde[1];
+ u8 hde[1];
+ u8 ir2t[1];
+ u8 imd[1];
+ u8 pad[26];
+ u8 exp_statsn[32];
+};
+
+/* void hwi_complete_drvr_msgs(struct beiscsi_conn *beiscsi_conn,
+ struct beiscsi_hba *phba, struct sol_cqe *psol);*/
+
+struct async_pdu_handle {
+ struct list_head link;
+ struct be_bus_address pa;
+ void *pbuffer;
+ unsigned int consumed;
+ unsigned char index;
+ unsigned char is_header;
+ unsigned short cri;
+ unsigned long buffer_len;
+};
+
+struct hwi_async_entry {
+ struct {
+ unsigned char hdr_received;
+ unsigned char hdr_len;
+ unsigned short bytes_received;
+ unsigned int bytes_needed;
+ struct list_head list;
+ } wait_queue;
+
+ struct list_head header_busy_list;
+ struct list_head data_busy_list;
+};
+
+#define BE_MIN_ASYNC_ENTRIES 128
+
+struct hwi_async_pdu_context {
+ struct {
+ struct be_bus_address pa_base;
+ void *va_base;
+ void *ring_base;
+ struct async_pdu_handle *handle_base;
+
+ unsigned int host_write_ptr;
+ unsigned int ep_read_ptr;
+ unsigned int writables;
+
+ unsigned int free_entries;
+ unsigned int busy_entries;
+ unsigned int buffer_size;
+ unsigned int num_entries;
+
+ struct list_head free_list;
+ } async_header;
+
+ struct {
+ struct be_bus_address pa_base;
+ void *va_base;
+ void *ring_base;
+ struct async_pdu_handle *handle_base;
+
+ unsigned int host_write_ptr;
+ unsigned int ep_read_ptr;
+ unsigned int writables;
+
+ unsigned int free_entries;
+ unsigned int busy_entries;
+ unsigned int buffer_size;
+ struct list_head free_list;
+ unsigned int num_entries;
+ } async_data;
+
+ /**
+ * This is a varying size list! Do not add anything
+ * after this entry!!
+ */
+ struct hwi_async_entry async_entry[BE_MIN_ASYNC_ENTRIES];
+};
+
+#define PDUCQE_CODE_MASK 0x0000003F
+#define PDUCQE_DPL_MASK 0xFFFF0000
+#define PDUCQE_INDEX_MASK 0x0000FFFF
+
+struct i_t_dpdu_cqe {
+ u32 dw[4];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_i_t_dpdu_cqe {
+ u8 db_addr_hi[32];
+ u8 db_addr_lo[32];
+ u8 code[6];
+ u8 cid[10];
+ u8 dpl[16];
+ u8 index[16];
+ u8 num_cons[10];
+ u8 rsvd0[4];
+ u8 final;
+ u8 valid;
+} __packed;
+
+#define CQE_VALID_MASK 0x80000000
+#define CQE_CODE_MASK 0x0000003F
+#define CQE_CID_MASK 0x0000FFC0
+
+#define EQE_VALID_MASK 0x00000001
+#define EQE_MAJORCODE_MASK 0x0000000E
+#define EQE_RESID_MASK 0xFFFF0000
+
+struct be_eq_entry {
+ u32 dw[1];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_eq_entry {
+ u8 valid; /* DWORD 0 */
+ u8 major_code[3]; /* DWORD 0 */
+ u8 minor_code[12]; /* DWORD 0 */
+ u8 resource_id[16]; /* DWORD 0 */
+
+} __packed;
+
+struct cq_db {
+ u32 dw[1];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_cq_db {
+ u8 qid[10];
+ u8 event[1];
+ u8 rsvd0[5];
+ u8 num_popped[13];
+ u8 rearm[1];
+ u8 rsvd1[2];
+} __packed;
+
+void beiscsi_process_eq(struct beiscsi_hba *phba);
+
+
+struct iscsi_wrb {
+ u32 dw[16];
+} __packed;
+
+#define WRB_TYPE_MASK 0xF0000000
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_iscsi_wrb {
+ u8 lun[14]; /* DWORD 0 */
+ u8 lt; /* DWORD 0 */
+ u8 invld; /* DWORD 0 */
+ u8 wrb_idx[8]; /* DWORD 0 */
+ u8 dsp; /* DWORD 0 */
+ u8 dmsg; /* DWORD 0 */
+ u8 undr_run; /* DWORD 0 */
+ u8 over_run; /* DWORD 0 */
+ u8 type[4]; /* DWORD 0 */
+ u8 ptr2nextwrb[8]; /* DWORD 1 */
+ u8 r2t_exp_dtl[24]; /* DWORD 1 */
+ u8 sgl_icd_idx[12]; /* DWORD 2 */
+ u8 rsvd0[20]; /* DWORD 2 */
+ u8 exp_data_sn[32]; /* DWORD 3 */
+ u8 iscsi_bhs_addr_hi[32]; /* DWORD 4 */
+ u8 iscsi_bhs_addr_lo[32]; /* DWORD 5 */
+ u8 cmdsn_itt[32]; /* DWORD 6 */
+ u8 dif_ref_tag[32]; /* DWORD 7 */
+ u8 sge0_addr_hi[32]; /* DWORD 8 */
+ u8 sge0_addr_lo[32]; /* DWORD 9 */
+ u8 sge0_offset[22]; /* DWORD 10 */
+ u8 pbs; /* DWORD 10 */
+ u8 dif_mode[2]; /* DWORD 10 */
+ u8 rsvd1[6]; /* DWORD 10 */
+ u8 sge0_last; /* DWORD 10 */
+ u8 sge0_len[17]; /* DWORD 11 */
+ u8 dif_meta_tag[14]; /* DWORD 11 */
+ u8 sge0_in_ddr; /* DWORD 11 */
+ u8 sge1_addr_hi[32]; /* DWORD 12 */
+ u8 sge1_addr_lo[32]; /* DWORD 13 */
+ u8 sge1_r2t_offset[22]; /* DWORD 14 */
+ u8 rsvd2[9]; /* DWORD 14 */
+ u8 sge1_last; /* DWORD 14 */
+ u8 sge1_len[17]; /* DWORD 15 */
+ u8 ref_sgl_icd_idx[12]; /* DWORD 15 */
+ u8 rsvd3[2]; /* DWORD 15 */
+ u8 sge1_in_ddr; /* DWORD 15 */
+
+} __packed;
+
+struct wrb_handle *alloc_wrb_handle(struct beiscsi_hba *phba, unsigned int cid,
+ int index);
+void
+free_mgmt_sgl_handle(struct beiscsi_hba *phba, struct sgl_handle *psgl_handle);
+
+struct pdu_nop_out {
+ u32 dw[12];
+};
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_pdu_nop_out {
+ u8 opcode[6]; /* opcode 0x00 */
+ u8 i_bit; /* I Bit */
+ u8 x_bit; /* reserved; should be 0 */
+ u8 fp_bit_filler1[7];
+ u8 f_bit; /* always 1 */
+ u8 reserved1[16];
+ u8 ahs_length[8]; /* no AHS */
+ u8 data_len_hi[8];
+ u8 data_len_lo[16]; /* DataSegmentLength */
+ u8 lun[64];
+ u8 itt[32]; /* initiator id for ping or 0xffffffff */
+ u8 ttt[32]; /* target id for ping or 0xffffffff */
+ u8 cmd_sn[32];
+ u8 exp_stat_sn[32];
+ u8 reserved5[128];
+};
+
+#define PDUBASE_OPCODE_MASK 0x0000003F
+#define PDUBASE_DATALENHI_MASK 0x0000FF00
+#define PDUBASE_DATALENLO_MASK 0xFFFF0000
+
+struct pdu_base {
+ u32 dw[16];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_pdu_base {
+ u8 opcode[6];
+ u8 i_bit; /* immediate bit */
+ u8 x_bit; /* reserved, always 0 */
+ u8 reserved1[24]; /* opcode-specific fields */
+ u8 ahs_length[8]; /* length units is 4 byte words */
+ u8 data_len_hi[8];
+ u8 data_len_lo[16]; /* DatasegmentLength */
+ u8 lun[64]; /* lun or opcode-specific fields */
+ u8 itt[32]; /* initiator task tag */
+ u8 reserved4[224];
+};
+
+struct iscsi_target_context_update_wrb {
+ u32 dw[16];
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_iscsi_target_context_update_wrb {
+ u8 lun[14]; /* DWORD 0 */
+ u8 lt; /* DWORD 0 */
+ u8 invld; /* DWORD 0 */
+ u8 wrb_idx[8]; /* DWORD 0 */
+ u8 dsp; /* DWORD 0 */
+ u8 dmsg; /* DWORD 0 */
+ u8 undr_run; /* DWORD 0 */
+ u8 over_run; /* DWORD 0 */
+ u8 type[4]; /* DWORD 0 */
+ u8 ptr2nextwrb[8]; /* DWORD 1 */
+ u8 max_burst_length[19]; /* DWORD 1 */
+ u8 rsvd0[5]; /* DWORD 1 */
+ u8 rsvd1[15]; /* DWORD 2 */
+ u8 max_send_data_segment_length[17]; /* DWORD 2 */
+ u8 first_burst_length[14]; /* DWORD 3 */
+ u8 rsvd2[2]; /* DWORD 3 */
+ u8 tx_wrbindex_drv_msg[8]; /* DWORD 3 */
+ u8 rsvd3[5]; /* DWORD 3 */
+ u8 session_state[3]; /* DWORD 3 */
+ u8 rsvd4[16]; /* DWORD 4 */
+ u8 tx_jumbo; /* DWORD 4 */
+ u8 hde; /* DWORD 4 */
+ u8 dde; /* DWORD 4 */
+ u8 erl[2]; /* DWORD 4 */
+ u8 domain_id[5]; /* DWORD 4 */
+ u8 mode; /* DWORD 4 */
+ u8 imd; /* DWORD 4 */
+ u8 ir2t; /* DWORD 4 */
+ u8 notpredblq[2]; /* DWORD 4 */
+ u8 compltonack; /* DWORD 4 */
+ u8 stat_sn[32]; /* DWORD 5 */
+ u8 pad_buffer_addr_hi[32]; /* DWORD 6 */
+ u8 pad_buffer_addr_lo[32]; /* DWORD 7 */
+ u8 pad_addr_hi[32]; /* DWORD 8 */
+ u8 pad_addr_lo[32]; /* DWORD 9 */
+ u8 rsvd5[32]; /* DWORD 10 */
+ u8 rsvd6[32]; /* DWORD 11 */
+ u8 rsvd7[32]; /* DWORD 12 */
+ u8 rsvd8[32]; /* DWORD 13 */
+ u8 rsvd9[32]; /* DWORD 14 */
+ u8 rsvd10[32]; /* DWORD 15 */
+
+} __packed;
+
+struct be_ring {
+ u32 pages; /* queue size in pages */
+ u32 id; /* queue id assigned by beklib */
+ u32 num; /* number of elements in queue */
+ u32 cidx; /* consumer index */
+ u32 pidx; /* producer index -- not used by most rings */
+ u32 item_size; /* size in bytes of one object */
+
+ void *va; /* The virtual address of the ring. This
+ * should be last to allow 32 & 64 bit debugger
+ * extensions to work.
+ */
+};
+
+struct hwi_wrb_context {
+ struct list_head wrb_handle_list;
+ struct list_head wrb_handle_drvr_list;
+ struct wrb_handle **pwrb_handle_base;
+ struct wrb_handle **pwrb_handle_basestd;
+ struct iscsi_wrb *plast_wrb;
+ unsigned short alloc_index;
+ unsigned short free_index;
+ unsigned short wrb_handles_available;
+ unsigned short cid;
+};
+
+struct hwi_controller {
+ struct list_head io_sgl_list;
+ struct list_head eh_sgl_list;
+ struct sgl_handle *psgl_handle_base;
+ unsigned int wrb_mem_index;
+
+ struct hwi_wrb_context wrb_context[BE2_MAX_SESSIONS * 2];
+ struct mcc_wrb *pmcc_wrb_base;
+ struct be_ring default_pdu_hdr;
+ struct be_ring default_pdu_data;
+ struct hwi_context_memory *phwi_ctxt;
+ unsigned short cq_errors[CXN_KILLED_CMND_DATA_NOT_ON_SAME_CONN];
+};
+
+enum hwh_type_enum {
+ HWH_TYPE_IO = 1,
+ HWH_TYPE_LOGOUT = 2,
+ HWH_TYPE_TMF = 3,
+ HWH_TYPE_NOP = 4,
+ HWH_TYPE_IO_RD = 5,
+ HWH_TYPE_LOGIN = 11,
+ HWH_TYPE_INVALID = 0xFFFFFFFF
+};
+
+struct wrb_handle {
+ enum hwh_type_enum type;
+ unsigned short wrb_index;
+ unsigned short nxt_wrb_index;
+
+ struct iscsi_task *pio_handle;
+ struct iscsi_wrb *pwrb;
+};
+
+struct hwi_context_memory {
+ struct be_eq_obj be_eq;
+ struct be_queue_info be_cq;
+ struct be_queue_info be_mcc_cq;
+ struct be_queue_info be_mcc;
+
+ struct be_queue_info be_def_hdrq;
+ struct be_queue_info be_def_dataq;
+
+ struct be_queue_info be_wrbq[BE2_MAX_SESSIONS];
+ struct be_mcc_wrb_context *pbe_mcc_context;
+
+ struct hwi_async_pdu_context *pasync_ctx;
+};
+
+#endif
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#include "be_mgmt.h"
+#include "be_iscsi.h"
+
+unsigned char mgmt_get_fw_config(struct be_ctrl_info *ctrl,
+ struct beiscsi_hba *phba)
+{
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_fw_cfg *req = embedded_payload(wrb);
+ int status = 0;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_QUERY_FIRMWARE_CONFIG, sizeof(*req));
+
+ status = be_mbox_notify(ctrl);
+ if (!status) {
+ struct be_fw_cfg *pfw_cfg;
+ pfw_cfg = req;
+ phba->fw_config.phys_port = pfw_cfg->phys_port;
+ phba->fw_config.iscsi_icd_start =
+ pfw_cfg->ulp[0].icd_base;
+ phba->fw_config.iscsi_icd_count =
+ pfw_cfg->ulp[0].icd_count;
+ phba->fw_config.iscsi_cid_start =
+ pfw_cfg->ulp[0].sq_base;
+ phba->fw_config.iscsi_cid_count =
+ pfw_cfg->ulp[0].sq_count;
+ } else {
+ shost_printk(KERN_WARNING, phba->shost,
+ "Failed in mgmt_get_fw_config \n");
+ }
+
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+unsigned char mgmt_check_supported_fw(struct be_ctrl_info *ctrl)
+{
+ struct be_dma_mem nonemb_cmd;
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_mgmt_controller_attributes *req;
+ struct be_sge *sge = nonembedded_sgl(wrb);
+ int status = 0;
+
+ nonemb_cmd.va = pci_alloc_consistent(ctrl->pdev,
+ sizeof(struct be_mgmt_controller_attributes),
+ &nonemb_cmd.dma);
+ if (nonemb_cmd.va == NULL) {
+ SE_DEBUG(DBG_LVL_1,
+ "Failed to allocate memory for mgmt_check_supported_fw"
+ "\n");
+ return -1;
+ }
+ nonemb_cmd.size = sizeof(struct be_mgmt_controller_attributes);
+ req = nonemb_cmd.va;
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+ be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+ OPCODE_COMMON_GET_CNTL_ATTRIBUTES, sizeof(*req));
+ sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd.dma));
+ sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(nonemb_cmd.size);
+
+ status = be_mbox_notify(ctrl);
+ if (!status) {
+ struct be_mgmt_controller_attributes_resp *resp = nonemb_cmd.va;
+ SE_DEBUG(DBG_LVL_8, "Firmware version of CMD: %s\n",
+ resp->params.hba_attribs.flashrom_version_string);
+ SE_DEBUG(DBG_LVL_8, "Firmware version is : %s\n",
+ resp->params.hba_attribs.firmware_version_string);
+ SE_DEBUG(DBG_LVL_8,
+ "Developer Build, not performing version check...\n");
+
+ } else
+ SE_DEBUG(DBG_LVL_1, " Failed in mgmt_check_supported_fw\n");
+ if (nonemb_cmd.va)
+ pci_free_consistent(ctrl->pdev, nonemb_cmd.size,
+ nonemb_cmd.va, nonemb_cmd.dma);
+
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+unsigned char mgmt_epfw_cleanup(struct beiscsi_hba *phba, unsigned short chute)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct iscsi_cleanup_req *req = embedded_payload(wrb);
+ int status = 0;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_CLEANUP, sizeof(*req));
+
+ req->chute = chute;
+ req->hdr_ring_id = 0;
+ req->data_ring_id = 0;
+
+ status = be_mbox_notify(ctrl);
+ if (status)
+ shost_printk(KERN_WARNING, phba->shost,
+ " mgmt_epfw_cleanup , FAILED\n");
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
+ unsigned int icd, unsigned int cid)
+{
+ struct be_dma_mem nonemb_cmd;
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct be_sge *sge = nonembedded_sgl(wrb);
+ struct invalidate_commands_params_in *req;
+ int status = 0;
+
+ nonemb_cmd.va = pci_alloc_consistent(ctrl->pdev,
+ sizeof(struct invalidate_commands_params_in),
+ &nonemb_cmd.dma);
+ if (nonemb_cmd.va == NULL) {
+ SE_DEBUG(DBG_LVL_1,
+ "Failed to allocate memory for"
+ "mgmt_invalidate_icds \n");
+ return -1;
+ }
+ nonemb_cmd.size = sizeof(struct invalidate_commands_params_in);
+ req = nonemb_cmd.va;
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), false, 1);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_ERROR_RECOVERY_INVALIDATE_COMMANDS,
+ sizeof(*req));
+ req->ref_handle = 0;
+ req->cleanup_type = CMD_ISCSI_COMMAND_INVALIDATE;
+ req->icd_count = 0;
+ req->table[req->icd_count].icd = icd;
+ req->table[req->icd_count].cid = cid;
+ sge->pa_hi = cpu_to_le32(upper_32_bits(nonemb_cmd.dma));
+ sge->pa_lo = cpu_to_le32(nonemb_cmd.dma & 0xFFFFFFFF);
+ sge->len = cpu_to_le32(nonemb_cmd.size);
+
+ status = be_mbox_notify(ctrl);
+ if (status)
+ SE_DEBUG(DBG_LVL_1, "ICDS Invalidation Failed\n");
+ spin_unlock(&ctrl->mbox_lock);
+ if (nonemb_cmd.va)
+ pci_free_consistent(ctrl->pdev, nonemb_cmd.size,
+ nonemb_cmd.va, nonemb_cmd.dma);
+ return status;
+}
+
+unsigned char mgmt_invalidate_connection(struct beiscsi_hba *phba,
+ struct beiscsi_endpoint *beiscsi_ep,
+ unsigned short cid,
+ unsigned short issue_reset,
+ unsigned short savecfg_flag)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct iscsi_invalidate_connection_params_in *req =
+ embedded_payload(wrb);
+ int status = 0;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI_INI,
+ OPCODE_ISCSI_INI_DRIVER_INVALIDATE_CONNECTION,
+ sizeof(*req));
+ req->session_handle = beiscsi_ep->fw_handle;
+ req->cid = cid;
+ if (issue_reset)
+ req->cleanup_type = CMD_ISCSI_CONNECTION_ISSUE_TCP_RST;
+ else
+ req->cleanup_type = CMD_ISCSI_CONNECTION_INVALIDATE;
+ req->save_cfg = savecfg_flag;
+ status = be_mbox_notify(ctrl);
+ if (status)
+ SE_DEBUG(DBG_LVL_1, "Invalidation Failed\n");
+
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+unsigned char mgmt_upload_connection(struct beiscsi_hba *phba,
+ unsigned short cid, unsigned int upload_flag)
+{
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct tcp_upload_params_in *req = embedded_payload(wrb);
+ int status = 0;
+
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_COMMON_TCP_UPLOAD,
+ OPCODE_COMMON_TCP_UPLOAD, sizeof(*req));
+ req->id = (unsigned short)cid;
+ req->upload_type = (unsigned char)upload_flag;
+ status = be_mbox_notify(ctrl);
+ if (status)
+ SE_DEBUG(DBG_LVL_1, "mgmt_upload_connection Failed\n");
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
+
+int mgmt_open_connection(struct beiscsi_hba *phba,
+ struct sockaddr *dst_addr,
+ struct beiscsi_endpoint *beiscsi_ep)
+{
+ struct hwi_controller *phwi_ctrlr;
+ struct hwi_context_memory *phwi_context;
+ struct sockaddr_in *daddr_in = (struct sockaddr_in *)dst_addr;
+ struct sockaddr_in6 *daddr_in6 = (struct sockaddr_in6 *)dst_addr;
+ struct be_ctrl_info *ctrl = &phba->ctrl;
+ struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+ struct tcp_connect_and_offload_in *req = embedded_payload(wrb);
+ unsigned short def_hdr_id;
+ unsigned short def_data_id;
+ struct phys_addr template_address = { 0, 0 };
+ struct phys_addr *ptemplate_address;
+ int status = 0;
+ unsigned short cid = beiscsi_ep->ep_cid;
+
+ phwi_ctrlr = phba->phwi_ctrlr;
+ phwi_context = phwi_ctrlr->phwi_ctxt;
+ def_hdr_id = (unsigned short)HWI_GET_DEF_HDRQ_ID(phba);
+ def_data_id = (unsigned short)HWI_GET_DEF_BUFQ_ID(phba);
+
+ ptemplate_address = &template_address;
+ ISCSI_GET_PDU_TEMPLATE_ADDRESS(phba, ptemplate_address);
+ spin_lock(&ctrl->mbox_lock);
+ memset(wrb, 0, sizeof(*wrb));
+
+ be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+ be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_ISCSI,
+ OPCODE_COMMON_ISCSI_TCP_CONNECT_AND_OFFLOAD,
+ sizeof(*req));
+ if (dst_addr->sa_family == PF_INET) {
+ __be32 s_addr = daddr_in->sin_addr.s_addr;
+ req->ip_address.ip_type = BE2_IPV4;
+ req->ip_address.ip_address[0] = s_addr & 0x000000ff;
+ req->ip_address.ip_address[1] = (s_addr & 0x0000ff00) >> 8;
+ req->ip_address.ip_address[2] = (s_addr & 0x00ff0000) >> 16;
+ req->ip_address.ip_address[3] = (s_addr & 0xff000000) >> 24;
+ req->tcp_port = ntohs(daddr_in->sin_port);
+ beiscsi_ep->dst_addr = daddr_in->sin_addr.s_addr;
+ beiscsi_ep->dst_tcpport = ntohs(daddr_in->sin_port);
+ beiscsi_ep->ip_type = BE2_IPV4;
+ } else if (dst_addr->sa_family == PF_INET6) {
+ req->ip_address.ip_type = BE2_IPV6;
+ memcpy(&req->ip_address.ip_address,
+ &daddr_in6->sin6_addr.in6_u.u6_addr8, 16);
+ req->tcp_port = ntohs(daddr_in6->sin6_port);
+ beiscsi_ep->dst_tcpport = ntohs(daddr_in6->sin6_port);
+ memcpy(&beiscsi_ep->dst6_addr,
+ &daddr_in6->sin6_addr.in6_u.u6_addr8, 16);
+ beiscsi_ep->ip_type = BE2_IPV6;
+ } else{
+ shost_printk(KERN_ERR, phba->shost, "unknown addr family %d\n",
+ dst_addr->sa_family);
+ spin_unlock(&ctrl->mbox_lock);
+ return -EINVAL;
+
+ }
+ req->cid = cid;
+ req->cq_id = phwi_context->be_cq.id;
+ req->defq_id = def_hdr_id;
+ req->hdr_ring_id = def_hdr_id;
+ req->data_ring_id = def_data_id;
+ req->do_offload = 1;
+ req->dataout_template_pa.lo = ptemplate_address->lo;
+ req->dataout_template_pa.hi = ptemplate_address->hi;
+ status = be_mbox_notify(ctrl);
+ if (!status) {
+ struct iscsi_endpoint *ep;
+ struct tcp_connect_and_offload_out *ptcpcnct_out =
+ embedded_payload(wrb);
+
+ ep = phba->ep_array[ptcpcnct_out->cid];
+ beiscsi_ep = ep->dd_data;
+ beiscsi_ep->fw_handle = 0;
+ beiscsi_ep->cid_vld = 1;
+ SE_DEBUG(DBG_LVL_8, "mgmt_open_connection Success\n");
+ } else
+ SE_DEBUG(DBG_LVL_1, "mgmt_open_connection Failed\n");
+ spin_unlock(&ctrl->mbox_lock);
+ return status;
+}
--- /dev/null
+/**
+ * Copyright (C) 2005 - 2009 ServerEngines
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation. The full GNU General
+ * Public License is included in this distribution in the file called COPYING.
+ *
+ * Written by: Jayamohan Kallickal (jayamohank@serverengines.com)
+ *
+ * Contact Information:
+ * linux-drivers@serverengines.com
+ *
+ * ServerEngines
+ * 209 N. Fair Oaks Ave
+ * Sunnyvale, CA 94085
+ *
+ */
+
+#ifndef _BEISCSI_MGMT_
+#define _BEISCSI_MGMT_
+
+#include <linux/types.h>
+#include <linux/list.h>
+#include "be_iscsi.h"
+#include "be_main.h"
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_sge {
+ u8 pa_lo[32]; /* dword 0 */
+ u8 pa_hi[32]; /* dword 1 */
+ u8 length[32]; /* DWORD 2 */
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_wrb_payload {
+ union {
+ struct amap_mcc_sge sgl[19];
+ u8 embedded[59 * 32]; /* DWORDS 57 to 115 */
+ } u;
+} __packed;
+
+/**
+ * Pseudo amap definition in which each bit of the actual structure is defined
+ * as a byte: used to calculate offset/shift/mask of each field
+ */
+struct amap_mcc_wrb {
+ u8 embedded; /* DWORD 0 */
+ u8 rsvd0[2]; /* DWORD 0 */
+ u8 sge_count[5]; /* DWORD 0 */
+ u8 rsvd1[16]; /* DWORD 0 */
+ u8 special[8]; /* DWORD 0 */
+ u8 payload_length[32];
+ u8 tag[64]; /* DWORD 2 */
+ u8 rsvd2[32]; /* DWORD 4 */
+ struct amap_mcc_wrb_payload payload;
+};
+
+struct mcc_sge {
+ u32 pa_lo; /* dword 0 */
+ u32 pa_hi; /* dword 1 */
+ u32 length; /* DWORD 2 */
+} __packed;
+
+struct mcc_wrb_payload {
+ union {
+ struct mcc_sge sgl[19];
+ u32 embedded[59]; /* DWORDS 57 to 115 */
+ } u;
+} __packed;
+
+#define MCC_WRB_EMBEDDED_MASK 0x00000001
+
+struct mcc_wrb {
+ u32 dw[0]; /* DWORD 0 */
+ u32 payload_length;
+ u32 tag[2]; /* DWORD 2 */
+ u32 rsvd2[1]; /* DWORD 4 */
+ struct mcc_wrb_payload payload;
+};
+
+unsigned char mgmt_epfw_cleanup(struct beiscsi_hba *phba, unsigned short chute);
+int mgmt_open_connection(struct beiscsi_hba *phba, struct sockaddr *dst_addr,
+ struct beiscsi_endpoint *beiscsi_ep);
+
+unsigned char mgmt_upload_connection(struct beiscsi_hba *phba,
+ unsigned short cid,
+ unsigned int upload_flag);
+unsigned char mgmt_invalidate_icds(struct beiscsi_hba *phba,
+ unsigned int icd, unsigned int cid);
+
+struct iscsi_invalidate_connection_params_in {
+ struct be_cmd_req_hdr hdr;
+ unsigned int session_handle;
+ unsigned short cid;
+ unsigned short unused;
+ unsigned short cleanup_type;
+ unsigned short save_cfg;
+} __packed;
+
+struct iscsi_invalidate_connection_params_out {
+ unsigned int session_handle;
+ unsigned short cid;
+ unsigned short unused;
+} __packed;
+
+union iscsi_invalidate_connection_params {
+ struct iscsi_invalidate_connection_params_in request;
+ struct iscsi_invalidate_connection_params_out response;
+} __packed;
+
+struct invalidate_command_table {
+ unsigned short icd;
+ unsigned short cid;
+} __packed;
+
+struct invalidate_commands_params_in {
+ struct be_cmd_req_hdr hdr;
+ unsigned int ref_handle;
+ unsigned int icd_count;
+ struct invalidate_command_table table[128];
+ unsigned short cleanup_type;
+ unsigned short unused;
+} __packed;
+
+struct invalidate_commands_params_out {
+ unsigned int ref_handle;
+ unsigned int icd_count;
+ unsigned int icd_status[128];
+} __packed;
+
+union invalidate_commands_params {
+ struct invalidate_commands_params_in request;
+ struct invalidate_commands_params_out response;
+} __packed;
+
+struct mgmt_hba_attributes {
+ u8 flashrom_version_string[32];
+ u8 manufacturer_name[32];
+ u32 supported_modes;
+ u8 seeprom_version_lo;
+ u8 seeprom_version_hi;
+ u8 rsvd0[2];
+ u32 fw_cmd_data_struct_version;
+ u32 ep_fw_data_struct_version;
+ u32 future_reserved[12];
+ u32 default_extended_timeout;
+ u8 controller_model_number[32];
+ u8 controller_description[64];
+ u8 controller_serial_number[32];
+ u8 ip_version_string[32];
+ u8 firmware_version_string[32];
+ u8 bios_version_string[32];
+ u8 redboot_version_string[32];
+ u8 driver_version_string[32];
+ u8 fw_on_flash_version_string[32];
+ u32 functionalities_supported;
+ u16 max_cdblength;
+ u8 asic_revision;
+ u8 generational_guid[16];
+ u8 hba_port_count;
+ u16 default_link_down_timeout;
+ u8 iscsi_ver_min_max;
+ u8 multifunction_device;
+ u8 cache_valid;
+ u8 hba_status;
+ u8 max_domains_supported;
+ u8 phy_port;
+ u32 firmware_post_status;
+ u32 hba_mtu[8];
+ u32 future_u32[4];
+} __packed;
+
+struct mgmt_controller_attributes {
+ struct mgmt_hba_attributes hba_attribs;
+ u16 pci_vendor_id;
+ u16 pci_device_id;
+ u16 pci_sub_vendor_id;
+ u16 pci_sub_system_id;
+ u8 pci_bus_number;
+ u8 pci_device_number;
+ u8 pci_function_number;
+ u8 interface_type;
+ u64 unique_identifier;
+ u8 netfilters;
+ u8 rsvd0[3];
+ u8 future_u32[4];
+} __packed;
+
+struct be_mgmt_controller_attributes {
+ struct be_cmd_req_hdr hdr;
+ struct mgmt_controller_attributes params;
+} __packed;
+
+struct be_mgmt_controller_attributes_resp {
+ struct be_cmd_resp_hdr hdr;
+ struct mgmt_controller_attributes params;
+} __packed;
+
+/* configuration management */
+
+#define GET_MGMT_CONTROLLER_WS(phba) (phba->pmgmt_ws)
+
+/* MGMT CMD flags */
+
+#define MGMT_CMDH_FREE (1<<0)
+
+/* --- MGMT_ERROR_CODES --- */
+/* Error Codes returned in the status field of the CMD response header */
+#define MGMT_STATUS_SUCCESS 0 /* The CMD completed without errors */
+#define MGMT_STATUS_FAILED 1 /* Error status in the Status field of */
+ /* the CMD_RESPONSE_HEADER */
+
+#define ISCSI_GET_PDU_TEMPLATE_ADDRESS(pc, pa) {\
+ pa->lo = phba->init_mem[ISCSI_MEM_GLOBAL_HEADER].mem_array[0].\
+ bus_address.u.a32.address_lo; \
+ pa->hi = phba->init_mem[ISCSI_MEM_GLOBAL_HEADER].mem_array[0].\
+ bus_address.u.a32.address_hi; \
+}
+
+struct beiscsi_endpoint {
+ struct beiscsi_hba *phba;
+ struct beiscsi_sess *sess;
+ struct beiscsi_conn *conn;
+ unsigned short ip_type;
+ char dst6_addr[ISCSI_ADDRESS_BUF_LEN];
+ unsigned long dst_addr;
+ unsigned short ep_cid;
+ unsigned int fw_handle;
+ u16 dst_tcpport;
+ u16 cid_vld;
+};
+
+unsigned char mgmt_get_fw_config(struct be_ctrl_info *ctrl,
+ struct beiscsi_hba *phba);
+
+unsigned char mgmt_invalidate_connection(struct beiscsi_hba *phba,
+ struct beiscsi_endpoint *beiscsi_ep,
+ unsigned short cid,
+ unsigned short issue_reset,
+ unsigned short savecfg_flag);
+#endif
--- /dev/null
+obj-$(CONFIG_SCSI_BFA_FC) := bfa.o
+
+bfa-y := bfad.o bfad_intr.o bfad_os.o bfad_im.o bfad_attr.o bfad_fwimg.o
+
+bfa-y += bfa_core.o bfa_ioc.o bfa_iocfc.o bfa_fcxp.o bfa_lps.o
+bfa-y += bfa_hw_cb.o bfa_hw_ct.o bfa_intr.o bfa_timer.o bfa_rport.o
+bfa-y += bfa_fcport.o bfa_port.o bfa_uf.o bfa_sgpg.o bfa_module.o bfa_ioim.o
+bfa-y += bfa_itnim.o bfa_fcpim.o bfa_tskim.o bfa_log.o bfa_log_module.o
+bfa-y += bfa_csdebug.o bfa_sm.o plog.o
+
+bfa-y += fcbuild.o fabric.o fcpim.o vfapi.o fcptm.o bfa_fcs.o bfa_fcs_port.o
+bfa-y += bfa_fcs_uf.o bfa_fcs_lport.o fab.o fdmi.o ms.o ns.o scn.o loop.o
+bfa-y += lport_api.o n2n.o rport.o rport_api.o rport_ftrs.o vport.o
+
+ccflags-y := -I$(obj) -I$(obj)/include -I$(obj)/include/cna
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_CALLBACK_PRIV_H__
+#define __BFA_CALLBACK_PRIV_H__
+
+#include <cs/bfa_q.h>
+
+typedef void (*bfa_cb_cbfn_t) (void *cbarg, bfa_boolean_t complete);
+
+/**
+ * Generic BFA callback element.
+ */
+struct bfa_cb_qe_s {
+ struct list_head qe;
+ bfa_cb_cbfn_t cbfn;
+ bfa_boolean_t once;
+ u32 rsvd;
+ void *cbarg;
+};
+
+#define bfa_cb_queue(__bfa, __hcb_qe, __cbfn, __cbarg) do { \
+ (__hcb_qe)->cbfn = (__cbfn); \
+ (__hcb_qe)->cbarg = (__cbarg); \
+ list_add_tail(&(__hcb_qe)->qe, &(__bfa)->comp_q); \
+} while (0)
+
+#define bfa_cb_dequeue(__hcb_qe) list_del(&(__hcb_qe)->qe)
+
+#define bfa_cb_queue_once(__bfa, __hcb_qe, __cbfn, __cbarg) do { \
+ (__hcb_qe)->cbfn = (__cbfn); \
+ (__hcb_qe)->cbarg = (__cbarg); \
+ if (!(__hcb_qe)->once) { \
+ list_add_tail((__hcb_qe), &(__bfa)->comp_q); \
+ (__hcb_qe)->once = BFA_TRUE; \
+ } \
+} while (0)
+
+#define bfa_cb_queue_done(__hcb_qe) do { \
+ (__hcb_qe)->once = BFA_FALSE; \
+} while (0)
+
+#endif /* __BFA_CALLBACK_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_cb_ioim_macros.h BFA IOIM driver interface macros.
+ */
+
+#ifndef __BFA_HCB_IOIM_MACROS_H__
+#define __BFA_HCB_IOIM_MACROS_H__
+
+#include <bfa_os_inc.h>
+/*
+ * #include <linux/dma-mapping.h>
+ *
+ * #include <scsi/scsi.h> #include <scsi/scsi_cmnd.h> #include
+ * <scsi/scsi_device.h> #include <scsi/scsi_host.h>
+ */
+#include "bfad_im_compat.h"
+
+/*
+ * task attribute values in FCP-2 FCP_CMND IU
+ */
+#define SIMPLE_Q 0
+#define HEAD_OF_Q 1
+#define ORDERED_Q 2
+#define ACA_Q 4
+#define UNTAGGED 5
+
+static inline lun_t
+bfad_int_to_lun(u32 luno)
+{
+ union {
+ u16 scsi_lun[4];
+ lun_t bfa_lun;
+ } lun;
+
+ lun.bfa_lun = 0;
+ lun.scsi_lun[0] = bfa_os_htons(luno);
+
+ return (lun.bfa_lun);
+}
+
+/**
+ * Get LUN for the I/O request
+ */
+#define bfa_cb_ioim_get_lun(__dio) \
+ bfad_int_to_lun(((struct scsi_cmnd *)__dio)->device->lun)
+
+/**
+ * Get CDB for the I/O request
+ */
+static inline u8 *
+bfa_cb_ioim_get_cdb(struct bfad_ioim_s *dio)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+ return ((u8 *) cmnd->cmnd);
+}
+
+/**
+ * Get I/O direction (read/write) for the I/O request
+ */
+static inline enum fcp_iodir
+bfa_cb_ioim_get_iodir(struct bfad_ioim_s *dio)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+ enum dma_data_direction dmadir;
+
+ dmadir = cmnd->sc_data_direction;
+ if (dmadir == DMA_TO_DEVICE)
+ return FCP_IODIR_WRITE;
+ else if (dmadir == DMA_FROM_DEVICE)
+ return FCP_IODIR_READ;
+ else
+ return FCP_IODIR_NONE;
+}
+
+/**
+ * Get IO size in bytes for the I/O request
+ */
+static inline u32
+bfa_cb_ioim_get_size(struct bfad_ioim_s *dio)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+ return (scsi_bufflen(cmnd));
+}
+
+/**
+ * Get timeout for the I/O request
+ */
+static inline u8
+bfa_cb_ioim_get_timeout(struct bfad_ioim_s *dio)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+ /*
+ * TBD: need a timeout for scsi passthru
+ */
+ if (cmnd->device->host == NULL)
+ return 4;
+
+ return 0;
+}
+
+/**
+ * Get SG element for the I/O request given the SG element index
+ */
+static inline union bfi_addr_u
+bfa_cb_ioim_get_sgaddr(struct bfad_ioim_s *dio, int sgeid)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+ struct scatterlist *sge;
+ u64 addr;
+
+ sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid;
+ addr = (u64) sg_dma_address(sge);
+
+ return (*(union bfi_addr_u *) &addr);
+}
+
+static inline u32
+bfa_cb_ioim_get_sglen(struct bfad_ioim_s *dio, int sgeid)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+ struct scatterlist *sge;
+ u32 len;
+
+ sge = (struct scatterlist *)scsi_sglist(cmnd) + sgeid;
+ len = sg_dma_len(sge);
+
+ return len;
+}
+
+/**
+ * Get Command Reference Number for the I/O request. 0 if none.
+ */
+static inline u8
+bfa_cb_ioim_get_crn(struct bfad_ioim_s *dio)
+{
+ return 0;
+}
+
+/**
+ * Get SAM-3 priority for the I/O request. 0 is default.
+ */
+static inline u8
+bfa_cb_ioim_get_priority(struct bfad_ioim_s *dio)
+{
+ return 0;
+}
+
+/**
+ * Get task attributes for the I/O request. Default is FCP_TASK_ATTR_SIMPLE(0).
+ */
+static inline u8
+bfa_cb_ioim_get_taskattr(struct bfad_ioim_s *dio)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+ u8 task_attr = UNTAGGED;
+
+ if (cmnd->device->tagged_supported) {
+ switch (cmnd->tag) {
+ case HEAD_OF_QUEUE_TAG:
+ task_attr = HEAD_OF_Q;
+ break;
+ case ORDERED_QUEUE_TAG:
+ task_attr = ORDERED_Q;
+ break;
+ default:
+ task_attr = SIMPLE_Q;
+ break;
+ }
+ }
+
+ return task_attr;
+}
+
+/**
+ * Get CDB length in bytes for the I/O request. Default is FCP_CMND_CDB_LEN(16).
+ */
+static inline u8
+bfa_cb_ioim_get_cdblen(struct bfad_ioim_s *dio)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+
+ return (cmnd->cmd_len);
+}
+
+
+
+#endif /* __BFA_HCB_IOIM_MACROS_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <defs/bfa_defs_cee.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+#include <cs/bfa_debug.h>
+#include <cee/bfa_cee.h>
+#include <bfi/bfi_cee.h>
+#include <bfi/bfi.h>
+#include <bfa_ioc.h>
+#include <cna/bfa_cna_trcmod.h>
+
+BFA_TRC_FILE(CNA, CEE);
+
+#define bfa_ioc_portid(__ioc) ((__ioc)->port_id)
+#define bfa_lpuid(__arg) bfa_ioc_portid(&(__arg)->ioc)
+
+static void bfa_cee_format_lldp_cfg(struct bfa_cee_lldp_cfg_s *lldp_cfg);
+static void bfa_cee_format_dcbcx_stats(struct bfa_cee_dcbx_stats_s
+ *dcbcx_stats);
+static void bfa_cee_format_lldp_stats(struct bfa_cee_lldp_stats_s
+ *lldp_stats);
+static void bfa_cee_format_cfg_stats(struct bfa_cee_cfg_stats_s *cfg_stats);
+static void bfa_cee_format_cee_cfg(void *buffer);
+static void bfa_cee_format_cee_stats(void *buffer);
+
+static void
+bfa_cee_format_cee_stats(void *buffer)
+{
+ struct bfa_cee_stats_s *cee_stats = buffer;
+ bfa_cee_format_dcbcx_stats(&cee_stats->dcbx_stats);
+ bfa_cee_format_lldp_stats(&cee_stats->lldp_stats);
+ bfa_cee_format_cfg_stats(&cee_stats->cfg_stats);
+}
+
+static void
+bfa_cee_format_cee_cfg(void *buffer)
+{
+ struct bfa_cee_attr_s *cee_cfg = buffer;
+ bfa_cee_format_lldp_cfg(&cee_cfg->lldp_remote);
+}
+
+static void
+bfa_cee_format_dcbcx_stats(struct bfa_cee_dcbx_stats_s *dcbcx_stats)
+{
+ dcbcx_stats->subtlvs_unrecognized =
+ bfa_os_ntohl(dcbcx_stats->subtlvs_unrecognized);
+ dcbcx_stats->negotiation_failed =
+ bfa_os_ntohl(dcbcx_stats->negotiation_failed);
+ dcbcx_stats->remote_cfg_changed =
+ bfa_os_ntohl(dcbcx_stats->remote_cfg_changed);
+ dcbcx_stats->tlvs_received = bfa_os_ntohl(dcbcx_stats->tlvs_received);
+ dcbcx_stats->tlvs_invalid = bfa_os_ntohl(dcbcx_stats->tlvs_invalid);
+ dcbcx_stats->seqno = bfa_os_ntohl(dcbcx_stats->seqno);
+ dcbcx_stats->ackno = bfa_os_ntohl(dcbcx_stats->ackno);
+ dcbcx_stats->recvd_seqno = bfa_os_ntohl(dcbcx_stats->recvd_seqno);
+ dcbcx_stats->recvd_ackno = bfa_os_ntohl(dcbcx_stats->recvd_ackno);
+}
+
+static void
+bfa_cee_format_lldp_stats(struct bfa_cee_lldp_stats_s *lldp_stats)
+{
+ lldp_stats->frames_transmitted =
+ bfa_os_ntohl(lldp_stats->frames_transmitted);
+ lldp_stats->frames_aged_out = bfa_os_ntohl(lldp_stats->frames_aged_out);
+ lldp_stats->frames_discarded =
+ bfa_os_ntohl(lldp_stats->frames_discarded);
+ lldp_stats->frames_in_error = bfa_os_ntohl(lldp_stats->frames_in_error);
+ lldp_stats->frames_rcvd = bfa_os_ntohl(lldp_stats->frames_rcvd);
+ lldp_stats->tlvs_discarded = bfa_os_ntohl(lldp_stats->tlvs_discarded);
+ lldp_stats->tlvs_unrecognized =
+ bfa_os_ntohl(lldp_stats->tlvs_unrecognized);
+}
+
+static void
+bfa_cee_format_cfg_stats(struct bfa_cee_cfg_stats_s *cfg_stats)
+{
+ cfg_stats->cee_status_down = bfa_os_ntohl(cfg_stats->cee_status_down);
+ cfg_stats->cee_status_up = bfa_os_ntohl(cfg_stats->cee_status_up);
+ cfg_stats->cee_hw_cfg_changed =
+ bfa_os_ntohl(cfg_stats->cee_hw_cfg_changed);
+ cfg_stats->recvd_invalid_cfg =
+ bfa_os_ntohl(cfg_stats->recvd_invalid_cfg);
+}
+
+static void
+bfa_cee_format_lldp_cfg(struct bfa_cee_lldp_cfg_s *lldp_cfg)
+{
+ lldp_cfg->time_to_interval = bfa_os_ntohs(lldp_cfg->time_to_interval);
+ lldp_cfg->enabled_system_cap =
+ bfa_os_ntohs(lldp_cfg->enabled_system_cap);
+}
+
+/**
+ * bfa_cee_attr_meminfo()
+ *
+ *
+ * @param[in] void
+ *
+ * @return Size of DMA region
+ */
+static u32
+bfa_cee_attr_meminfo(void)
+{
+ return BFA_ROUNDUP(sizeof(struct bfa_cee_attr_s), BFA_DMA_ALIGN_SZ);
+}
+
+/**
+ * bfa_cee_stats_meminfo()
+ *
+ *
+ * @param[in] void
+ *
+ * @return Size of DMA region
+ */
+static u32
+bfa_cee_stats_meminfo(void)
+{
+ return BFA_ROUNDUP(sizeof(struct bfa_cee_stats_s), BFA_DMA_ALIGN_SZ);
+}
+
+/**
+ * bfa_cee_get_attr_isr()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module
+ * status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_cee_get_attr_isr(struct bfa_cee_s *cee, bfa_status_t status)
+{
+ cee->get_attr_status = status;
+ bfa_trc(cee, 0);
+ if (status == BFA_STATUS_OK) {
+ bfa_trc(cee, 0);
+ /*
+ * The requested data has been copied to the DMA area, *process
+ * it.
+ */
+ memcpy(cee->attr, cee->attr_dma.kva,
+ sizeof(struct bfa_cee_attr_s));
+ bfa_cee_format_cee_cfg(cee->attr);
+ }
+ cee->get_attr_pending = BFA_FALSE;
+ if (cee->cbfn.get_attr_cbfn) {
+ bfa_trc(cee, 0);
+ cee->cbfn.get_attr_cbfn(cee->cbfn.get_attr_cbarg, status);
+ }
+ bfa_trc(cee, 0);
+}
+
+/**
+ * bfa_cee_get_attr_isr()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module
+ * status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_cee_get_stats_isr(struct bfa_cee_s *cee, bfa_status_t status)
+{
+ cee->get_stats_status = status;
+ bfa_trc(cee, 0);
+ if (status == BFA_STATUS_OK) {
+ bfa_trc(cee, 0);
+ /*
+ * The requested data has been copied to the DMA area, process
+ * it.
+ */
+ memcpy(cee->stats, cee->stats_dma.kva,
+ sizeof(struct bfa_cee_stats_s));
+ bfa_cee_format_cee_stats(cee->stats);
+ }
+ cee->get_stats_pending = BFA_FALSE;
+ bfa_trc(cee, 0);
+ if (cee->cbfn.get_stats_cbfn) {
+ bfa_trc(cee, 0);
+ cee->cbfn.get_stats_cbfn(cee->cbfn.get_stats_cbarg, status);
+ }
+ bfa_trc(cee, 0);
+}
+
+/**
+ * bfa_cee_get_attr_isr()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module
+ * status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_cee_reset_stats_isr(struct bfa_cee_s *cee, bfa_status_t status)
+{
+ cee->reset_stats_status = status;
+ cee->reset_stats_pending = BFA_FALSE;
+ if (cee->cbfn.reset_stats_cbfn)
+ cee->cbfn.reset_stats_cbfn(cee->cbfn.reset_stats_cbarg, status);
+}
+
+/**
+ * bfa_cee_meminfo()
+ *
+ *
+ * @param[in] void
+ *
+ * @return Size of DMA region
+ */
+u32
+bfa_cee_meminfo(void)
+{
+ return (bfa_cee_attr_meminfo() + bfa_cee_stats_meminfo());
+}
+
+/**
+ * bfa_cee_mem_claim()
+ *
+ *
+ * @param[in] cee CEE module pointer
+ * dma_kva Kernel Virtual Address of CEE DMA Memory
+ * dma_pa Physical Address of CEE DMA Memory
+ *
+ * @return void
+ */
+void
+bfa_cee_mem_claim(struct bfa_cee_s *cee, u8 *dma_kva, u64 dma_pa)
+{
+ cee->attr_dma.kva = dma_kva;
+ cee->attr_dma.pa = dma_pa;
+ cee->stats_dma.kva = dma_kva + bfa_cee_attr_meminfo();
+ cee->stats_dma.pa = dma_pa + bfa_cee_attr_meminfo();
+ cee->attr = (struct bfa_cee_attr_s *)dma_kva;
+ cee->stats =
+ (struct bfa_cee_stats_s *)(dma_kva + bfa_cee_attr_meminfo());
+}
+
+/**
+ * bfa_cee_get_attr()
+ *
+ * Send the request to the f/w to fetch CEE attributes.
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return Status
+ */
+
+bfa_status_t
+bfa_cee_get_attr(struct bfa_cee_s *cee, struct bfa_cee_attr_s *attr,
+ bfa_cee_get_attr_cbfn_t cbfn, void *cbarg)
+{
+ struct bfi_cee_get_req_s *cmd;
+
+ bfa_assert((cee != NULL) && (cee->ioc != NULL));
+ bfa_trc(cee, 0);
+ if (!bfa_ioc_is_operational(cee->ioc)) {
+ bfa_trc(cee, 0);
+ return BFA_STATUS_IOC_FAILURE;
+ }
+ if (cee->get_attr_pending == BFA_TRUE) {
+ bfa_trc(cee, 0);
+ return BFA_STATUS_DEVBUSY;
+ }
+ cee->get_attr_pending = BFA_TRUE;
+ cmd = (struct bfi_cee_get_req_s *)cee->get_cfg_mb.msg;
+ cee->attr = attr;
+ cee->cbfn.get_attr_cbfn = cbfn;
+ cee->cbfn.get_attr_cbarg = cbarg;
+ bfi_h2i_set(cmd->mh, BFI_MC_CEE, BFI_CEE_H2I_GET_CFG_REQ,
+ bfa_ioc_portid(cee->ioc));
+ bfa_dma_be_addr_set(cmd->dma_addr, cee->attr_dma.pa);
+ bfa_ioc_mbox_queue(cee->ioc, &cee->get_cfg_mb);
+ bfa_trc(cee, 0);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_cee_get_stats()
+ *
+ * Send the request to the f/w to fetch CEE statistics.
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return Status
+ */
+
+bfa_status_t
+bfa_cee_get_stats(struct bfa_cee_s *cee, struct bfa_cee_stats_s *stats,
+ bfa_cee_get_stats_cbfn_t cbfn, void *cbarg)
+{
+ struct bfi_cee_get_req_s *cmd;
+
+ bfa_assert((cee != NULL) && (cee->ioc != NULL));
+
+ if (!bfa_ioc_is_operational(cee->ioc)) {
+ bfa_trc(cee, 0);
+ return BFA_STATUS_IOC_FAILURE;
+ }
+ if (cee->get_stats_pending == BFA_TRUE) {
+ bfa_trc(cee, 0);
+ return BFA_STATUS_DEVBUSY;
+ }
+ cee->get_stats_pending = BFA_TRUE;
+ cmd = (struct bfi_cee_get_req_s *)cee->get_stats_mb.msg;
+ cee->stats = stats;
+ cee->cbfn.get_stats_cbfn = cbfn;
+ cee->cbfn.get_stats_cbarg = cbarg;
+ bfi_h2i_set(cmd->mh, BFI_MC_CEE, BFI_CEE_H2I_GET_STATS_REQ,
+ bfa_ioc_portid(cee->ioc));
+ bfa_dma_be_addr_set(cmd->dma_addr, cee->stats_dma.pa);
+ bfa_ioc_mbox_queue(cee->ioc, &cee->get_stats_mb);
+ bfa_trc(cee, 0);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_cee_reset_stats()
+ *
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return Status
+ */
+
+bfa_status_t
+bfa_cee_reset_stats(struct bfa_cee_s *cee, bfa_cee_reset_stats_cbfn_t cbfn,
+ void *cbarg)
+{
+ struct bfi_cee_reset_stats_s *cmd;
+
+ bfa_assert((cee != NULL) && (cee->ioc != NULL));
+ if (!bfa_ioc_is_operational(cee->ioc)) {
+ bfa_trc(cee, 0);
+ return BFA_STATUS_IOC_FAILURE;
+ }
+ if (cee->reset_stats_pending == BFA_TRUE) {
+ bfa_trc(cee, 0);
+ return BFA_STATUS_DEVBUSY;
+ }
+ cee->reset_stats_pending = BFA_TRUE;
+ cmd = (struct bfi_cee_reset_stats_s *)cee->reset_stats_mb.msg;
+ cee->cbfn.reset_stats_cbfn = cbfn;
+ cee->cbfn.reset_stats_cbarg = cbarg;
+ bfi_h2i_set(cmd->mh, BFI_MC_CEE, BFI_CEE_H2I_RESET_STATS,
+ bfa_ioc_portid(cee->ioc));
+ bfa_ioc_mbox_queue(cee->ioc, &cee->reset_stats_mb);
+ bfa_trc(cee, 0);
+ return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_cee_isrs()
+ *
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return void
+ */
+
+void
+bfa_cee_isr(void *cbarg, struct bfi_mbmsg_s *m)
+{
+ union bfi_cee_i2h_msg_u *msg;
+ struct bfi_cee_get_rsp_s *get_rsp;
+ struct bfa_cee_s *cee = (struct bfa_cee_s *)cbarg;
+ msg = (union bfi_cee_i2h_msg_u *)m;
+ get_rsp = (struct bfi_cee_get_rsp_s *)m;
+ bfa_trc(cee, msg->mh.msg_id);
+ switch (msg->mh.msg_id) {
+ case BFI_CEE_I2H_GET_CFG_RSP:
+ bfa_trc(cee, get_rsp->cmd_status);
+ bfa_cee_get_attr_isr(cee, get_rsp->cmd_status);
+ break;
+ case BFI_CEE_I2H_GET_STATS_RSP:
+ bfa_cee_get_stats_isr(cee, get_rsp->cmd_status);
+ break;
+ case BFI_CEE_I2H_RESET_STATS_RSP:
+ bfa_cee_reset_stats_isr(cee, get_rsp->cmd_status);
+ break;
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * bfa_cee_hbfail()
+ *
+ *
+ * @param[in] Pointer to the CEE module data structure.
+ *
+ * @return void
+ */
+
+void
+bfa_cee_hbfail(void *arg)
+{
+ struct bfa_cee_s *cee;
+ cee = (struct bfa_cee_s *)arg;
+
+ if (cee->get_attr_pending == BFA_TRUE) {
+ cee->get_attr_status = BFA_STATUS_FAILED;
+ cee->get_attr_pending = BFA_FALSE;
+ if (cee->cbfn.get_attr_cbfn) {
+ cee->cbfn.get_attr_cbfn(cee->cbfn.get_attr_cbarg,
+ BFA_STATUS_FAILED);
+ }
+ }
+ if (cee->get_stats_pending == BFA_TRUE) {
+ cee->get_stats_status = BFA_STATUS_FAILED;
+ cee->get_stats_pending = BFA_FALSE;
+ if (cee->cbfn.get_stats_cbfn) {
+ cee->cbfn.get_stats_cbfn(cee->cbfn.get_stats_cbarg,
+ BFA_STATUS_FAILED);
+ }
+ }
+ if (cee->reset_stats_pending == BFA_TRUE) {
+ cee->reset_stats_status = BFA_STATUS_FAILED;
+ cee->reset_stats_pending = BFA_FALSE;
+ if (cee->cbfn.reset_stats_cbfn) {
+ cee->cbfn.reset_stats_cbfn(cee->cbfn.reset_stats_cbarg,
+ BFA_STATUS_FAILED);
+ }
+ }
+}
+
+/**
+ * bfa_cee_attach()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module data structure
+ * ioc - Pointer to the ioc module data structure
+ * dev - Pointer to the device driver module data structure
+ * The device driver specific mbox ISR functions have
+ * this pointer as one of the parameters.
+ * trcmod -
+ * logmod -
+ *
+ * @return void
+ */
+void
+bfa_cee_attach(struct bfa_cee_s *cee, struct bfa_ioc_s *ioc, void *dev,
+ struct bfa_trc_mod_s *trcmod, struct bfa_log_mod_s *logmod)
+{
+ bfa_assert(cee != NULL);
+ cee->dev = dev;
+ cee->trcmod = trcmod;
+ cee->logmod = logmod;
+ cee->ioc = ioc;
+
+ bfa_ioc_mbox_regisr(cee->ioc, BFI_MC_CEE, bfa_cee_isr, cee);
+ bfa_ioc_hbfail_init(&cee->hbfail, bfa_cee_hbfail, cee);
+ bfa_ioc_hbfail_register(cee->ioc, &cee->hbfail);
+ bfa_trc(cee, 0);
+}
+
+/**
+ * bfa_cee_detach()
+ *
+ *
+ * @param[in] cee - Pointer to the CEE module data structure
+ *
+ * @return void
+ */
+void
+bfa_cee_detach(struct bfa_cee_s *cee)
+{
+ /*
+ * For now, just check if there is some ioctl pending and mark that as
+ * failed?
+ */
+ /* bfa_cee_hbfail(cee); */
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <defs/bfa_defs_pci.h>
+#include <cs/bfa_debug.h>
+#include <bfa_iocfc.h>
+
+#define DEF_CFG_NUM_FABRICS 1
+#define DEF_CFG_NUM_LPORTS 256
+#define DEF_CFG_NUM_CQS 4
+#define DEF_CFG_NUM_IOIM_REQS (BFA_IOIM_MAX)
+#define DEF_CFG_NUM_TSKIM_REQS 128
+#define DEF_CFG_NUM_FCXP_REQS 64
+#define DEF_CFG_NUM_UF_BUFS 64
+#define DEF_CFG_NUM_RPORTS 1024
+#define DEF_CFG_NUM_ITNIMS (DEF_CFG_NUM_RPORTS)
+#define DEF_CFG_NUM_TINS 256
+
+#define DEF_CFG_NUM_SGPGS 2048
+#define DEF_CFG_NUM_REQQ_ELEMS 256
+#define DEF_CFG_NUM_RSPQ_ELEMS 64
+#define DEF_CFG_NUM_SBOOT_TGTS 16
+#define DEF_CFG_NUM_SBOOT_LUNS 16
+
+/**
+ * Use this function query the memory requirement of the BFA library.
+ * This function needs to be called before bfa_attach() to get the
+ * memory required of the BFA layer for a given driver configuration.
+ *
+ * This call will fail, if the cap is out of range compared to pre-defined
+ * values within the BFA library
+ *
+ * @param[in] cfg - pointer to bfa_ioc_cfg_t. Driver layer should indicate
+ * its configuration in this structure.
+ * The default values for struct bfa_iocfc_cfg_s can be
+ * fetched using bfa_cfg_get_default() API.
+ *
+ * If cap's boundary check fails, the library will use
+ * the default bfa_cap_t values (and log a warning msg).
+ *
+ * @param[out] meminfo - pointer to bfa_meminfo_t. This content
+ * indicates the memory type (see bfa_mem_type_t) and
+ * amount of memory required.
+ *
+ * Driver should allocate the memory, populate the
+ * starting address for each block and provide the same
+ * structure as input parameter to bfa_attach() call.
+ *
+ * @return void
+ *
+ * Special Considerations: @note
+ */
+void
+bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg, struct bfa_meminfo_s *meminfo)
+{
+ int i;
+ u32 km_len = 0, dm_len = 0;
+
+ bfa_assert((cfg != NULL) && (meminfo != NULL));
+
+ bfa_os_memset((void *)meminfo, 0, sizeof(struct bfa_meminfo_s));
+ meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_type =
+ BFA_MEM_TYPE_KVA;
+ meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_type =
+ BFA_MEM_TYPE_DMA;
+
+ bfa_iocfc_meminfo(cfg, &km_len, &dm_len);
+
+ for (i = 0; hal_mods[i]; i++)
+ hal_mods[i]->meminfo(cfg, &km_len, &dm_len);
+
+
+ meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_len = km_len;
+ meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_len = dm_len;
+}
+
+/**
+ * Use this function to do attach the driver instance with the BFA
+ * library. This function will not trigger any HW initialization
+ * process (which will be done in bfa_init() call)
+ *
+ * This call will fail, if the cap is out of range compared to
+ * pre-defined values within the BFA library
+ *
+ * @param[out] bfa Pointer to bfa_t.
+ * @param[in] bfad Opaque handle back to the driver's IOC structure
+ * @param[in] cfg Pointer to bfa_ioc_cfg_t. Should be same structure
+ * that was used in bfa_cfg_get_meminfo().
+ * @param[in] meminfo Pointer to bfa_meminfo_t. The driver should
+ * use the bfa_cfg_get_meminfo() call to
+ * find the memory blocks required, allocate the
+ * required memory and provide the starting addresses.
+ * @param[in] pcidev pointer to struct bfa_pcidev_s
+ *
+ * @return
+ * void
+ *
+ * Special Considerations:
+ *
+ * @note
+ *
+ */
+void
+bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+ int i;
+ struct bfa_mem_elem_s *melem;
+
+ bfa->fcs = BFA_FALSE;
+
+ bfa_assert((cfg != NULL) && (meminfo != NULL));
+
+ /**
+ * initialize all memory pointers for iterative allocation
+ */
+ for (i = 0; i < BFA_MEM_TYPE_MAX; i++) {
+ melem = meminfo->meminfo + i;
+ melem->kva_curp = melem->kva;
+ melem->dma_curp = melem->dma;
+ }
+
+ bfa_iocfc_attach(bfa, bfad, cfg, meminfo, pcidev);
+
+ for (i = 0; hal_mods[i]; i++)
+ hal_mods[i]->attach(bfa, bfad, cfg, meminfo, pcidev);
+
+}
+
+/**
+ * Use this function to delete a BFA IOC. IOC should be stopped (by
+ * calling bfa_stop()) before this function call.
+ *
+ * @param[in] bfa - pointer to bfa_t.
+ *
+ * @return
+ * void
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+void
+bfa_detach(struct bfa_s *bfa)
+{
+ int i;
+
+ for (i = 0; hal_mods[i]; i++)
+ hal_mods[i]->detach(bfa);
+
+ bfa_iocfc_detach(bfa);
+}
+
+
+void
+bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod)
+{
+ bfa->trcmod = trcmod;
+}
+
+
+void
+bfa_init_log(struct bfa_s *bfa, struct bfa_log_mod_s *logmod)
+{
+ bfa->logm = logmod;
+}
+
+
+void
+bfa_init_aen(struct bfa_s *bfa, struct bfa_aen_s *aen)
+{
+ bfa->aen = aen;
+}
+
+void
+bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog)
+{
+ bfa->plog = plog;
+}
+
+/**
+ * Initialize IOC.
+ *
+ * This function will return immediately, when the IOC initialization is
+ * completed, the bfa_cb_init() will be called.
+ *
+ * @param[in] bfa instance
+ *
+ * @return void
+ *
+ * Special Considerations:
+ *
+ * @note
+ * When this function returns, the driver should register the interrupt service
+ * routine(s) and enable the device interrupts. If this is not done,
+ * bfa_cb_init() will never get called
+ */
+void
+bfa_init(struct bfa_s *bfa)
+{
+ bfa_iocfc_init(bfa);
+}
+
+/**
+ * Use this function initiate the IOC configuration setup. This function
+ * will return immediately.
+ *
+ * @param[in] bfa instance
+ *
+ * @return None
+ */
+void
+bfa_start(struct bfa_s *bfa)
+{
+ bfa_iocfc_start(bfa);
+}
+
+/**
+ * Use this function quiese the IOC. This function will return immediately,
+ * when the IOC is actually stopped, the bfa_cb_stop() will be called.
+ *
+ * @param[in] bfa - pointer to bfa_t.
+ *
+ * @return None
+ *
+ * Special Considerations:
+ * bfa_cb_stop() could be called before or after bfa_stop() returns.
+ *
+ * @note
+ * In case of any failure, we could handle it automatically by doing a
+ * reset and then succeed the bfa_stop() call.
+ */
+void
+bfa_stop(struct bfa_s *bfa)
+{
+ bfa_iocfc_stop(bfa);
+}
+
+void
+bfa_comp_deq(struct bfa_s *bfa, struct list_head *comp_q)
+{
+ INIT_LIST_HEAD(comp_q);
+ list_splice_tail_init(&bfa->comp_q, comp_q);
+}
+
+void
+bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q)
+{
+ struct list_head *qe;
+ struct list_head *qen;
+ struct bfa_cb_qe_s *hcb_qe;
+
+ list_for_each_safe(qe, qen, comp_q) {
+ hcb_qe = (struct bfa_cb_qe_s *) qe;
+ hcb_qe->cbfn(hcb_qe->cbarg, BFA_TRUE);
+ }
+}
+
+void
+bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q)
+{
+ struct list_head *qe;
+ struct bfa_cb_qe_s *hcb_qe;
+
+ while (!list_empty(comp_q)) {
+ bfa_q_deq(comp_q, &qe);
+ hcb_qe = (struct bfa_cb_qe_s *) qe;
+ hcb_qe->cbfn(hcb_qe->cbarg, BFA_FALSE);
+ }
+}
+
+void
+bfa_attach_fcs(struct bfa_s *bfa)
+{
+ bfa->fcs = BFA_TRUE;
+}
+
+/**
+ * Periodic timer heart beat from driver
+ */
+void
+bfa_timer_tick(struct bfa_s *bfa)
+{
+ bfa_timer_beat(&bfa->timer_mod);
+}
+
+#ifndef BFA_BIOS_BUILD
+/**
+ * Return the list of PCI vendor/device id lists supported by this
+ * BFA instance.
+ */
+void
+bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids)
+{
+ static struct bfa_pciid_s __pciids[] = {
+ {BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_FC_8G2P},
+ {BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_FC_8G1P},
+ {BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_CT},
+ };
+
+ *npciids = sizeof(__pciids) / sizeof(__pciids[0]);
+ *pciids = __pciids;
+}
+
+/**
+ * Use this function query the default struct bfa_iocfc_cfg_s value (compiled
+ * into BFA layer). The OS driver can then turn back and overwrite entries that
+ * have been configured by the user.
+ *
+ * @param[in] cfg - pointer to bfa_ioc_cfg_t
+ *
+ * @return
+ * void
+ *
+ * Special Considerations:
+ * note
+ */
+void
+bfa_cfg_get_default(struct bfa_iocfc_cfg_s *cfg)
+{
+ cfg->fwcfg.num_fabrics = DEF_CFG_NUM_FABRICS;
+ cfg->fwcfg.num_lports = DEF_CFG_NUM_LPORTS;
+ cfg->fwcfg.num_rports = DEF_CFG_NUM_RPORTS;
+ cfg->fwcfg.num_ioim_reqs = DEF_CFG_NUM_IOIM_REQS;
+ cfg->fwcfg.num_tskim_reqs = DEF_CFG_NUM_TSKIM_REQS;
+ cfg->fwcfg.num_fcxp_reqs = DEF_CFG_NUM_FCXP_REQS;
+ cfg->fwcfg.num_uf_bufs = DEF_CFG_NUM_UF_BUFS;
+ cfg->fwcfg.num_cqs = DEF_CFG_NUM_CQS;
+
+ cfg->drvcfg.num_reqq_elems = DEF_CFG_NUM_REQQ_ELEMS;
+ cfg->drvcfg.num_rspq_elems = DEF_CFG_NUM_RSPQ_ELEMS;
+ cfg->drvcfg.num_sgpgs = DEF_CFG_NUM_SGPGS;
+ cfg->drvcfg.num_sboot_tgts = DEF_CFG_NUM_SBOOT_TGTS;
+ cfg->drvcfg.num_sboot_luns = DEF_CFG_NUM_SBOOT_LUNS;
+ cfg->drvcfg.path_tov = BFA_FCPIM_PATHTOV_DEF;
+ cfg->drvcfg.ioc_recover = BFA_FALSE;
+ cfg->drvcfg.delay_comp = BFA_FALSE;
+
+}
+
+void
+bfa_cfg_get_min(struct bfa_iocfc_cfg_s *cfg)
+{
+ bfa_cfg_get_default(cfg);
+ cfg->fwcfg.num_ioim_reqs = BFA_IOIM_MIN;
+ cfg->fwcfg.num_tskim_reqs = BFA_TSKIM_MIN;
+ cfg->fwcfg.num_fcxp_reqs = BFA_FCXP_MIN;
+ cfg->fwcfg.num_uf_bufs = BFA_UF_MIN;
+ cfg->fwcfg.num_rports = BFA_RPORT_MIN;
+
+ cfg->drvcfg.num_sgpgs = BFA_SGPG_MIN;
+ cfg->drvcfg.num_reqq_elems = BFA_REQQ_NELEMS_MIN;
+ cfg->drvcfg.num_rspq_elems = BFA_RSPQ_NELEMS_MIN;
+ cfg->drvcfg.min_cfg = BFA_TRUE;
+}
+
+void
+bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr)
+{
+ bfa_ioc_get_attr(&bfa->ioc, ioc_attr);
+}
+
+/**
+ * Retrieve firmware trace information on IOC failure.
+ */
+bfa_status_t
+bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen)
+{
+ return bfa_ioc_debug_fwsave(&bfa->ioc, trcdata, trclen);
+}
+
+/**
+ * Fetch firmware trace data.
+ *
+ * @param[in] bfa BFA instance
+ * @param[out] trcdata Firmware trace buffer
+ * @param[in,out] trclen Firmware trace buffer len
+ *
+ * @retval BFA_STATUS_OK Firmware trace is fetched.
+ * @retval BFA_STATUS_INPROGRESS Firmware trace fetch is in progress.
+ */
+bfa_status_t
+bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen)
+{
+ return bfa_ioc_debug_fwtrc(&bfa->ioc, trcdata, trclen);
+}
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <cs/bfa_debug.h>
+#include <bfa_os_inc.h>
+#include <cs/bfa_q.h>
+#include <log/bfa_log_hal.h>
+
+/**
+ * cs_debug_api
+ */
+
+
+void
+bfa_panic(int line, char *file, char *panicstr)
+{
+ bfa_log(NULL, BFA_LOG_HAL_ASSERT, file, line, panicstr);
+ bfa_os_panic();
+}
+
+void
+bfa_sm_panic(struct bfa_log_mod_s *logm, int line, char *file, int event)
+{
+ bfa_log(logm, BFA_LOG_HAL_SM_ASSERT, file, line, event);
+ bfa_os_panic();
+}
+
+int
+bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe)
+{
+ struct list_head *tqe;
+
+ tqe = bfa_q_next(q);
+ while (tqe != q) {
+ if (tqe == qe)
+ return (1);
+ tqe = bfa_q_next(tqe);
+ if (tqe == NULL)
+ break;
+ }
+ return (0);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <log/bfa_log_hal.h>
+
+BFA_TRC_FILE(HAL, FCPIM);
+BFA_MODULE(fcpim);
+
+/**
+ * hal_fcpim_mod BFA FCP Initiator Mode module
+ */
+
+/**
+ * Compute and return memory needed by FCP(im) module.
+ */
+static void
+bfa_fcpim_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+ u32 *dm_len)
+{
+ bfa_itnim_meminfo(cfg, km_len, dm_len);
+
+ /**
+ * IO memory
+ */
+ if (cfg->fwcfg.num_ioim_reqs < BFA_IOIM_MIN)
+ cfg->fwcfg.num_ioim_reqs = BFA_IOIM_MIN;
+ else if (cfg->fwcfg.num_ioim_reqs > BFA_IOIM_MAX)
+ cfg->fwcfg.num_ioim_reqs = BFA_IOIM_MAX;
+
+ *km_len += cfg->fwcfg.num_ioim_reqs *
+ (sizeof(struct bfa_ioim_s) + sizeof(struct bfa_ioim_sp_s));
+
+ *dm_len += cfg->fwcfg.num_ioim_reqs * BFI_IOIM_SNSLEN;
+
+ /**
+ * task management command memory
+ */
+ if (cfg->fwcfg.num_tskim_reqs < BFA_TSKIM_MIN)
+ cfg->fwcfg.num_tskim_reqs = BFA_TSKIM_MIN;
+ *km_len += cfg->fwcfg.num_tskim_reqs * sizeof(struct bfa_tskim_s);
+}
+
+
+static void
+bfa_fcpim_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+ bfa_trc(bfa, cfg->drvcfg.path_tov);
+ bfa_trc(bfa, cfg->fwcfg.num_rports);
+ bfa_trc(bfa, cfg->fwcfg.num_ioim_reqs);
+ bfa_trc(bfa, cfg->fwcfg.num_tskim_reqs);
+
+ fcpim->bfa = bfa;
+ fcpim->num_itnims = cfg->fwcfg.num_rports;
+ fcpim->num_ioim_reqs = cfg->fwcfg.num_ioim_reqs;
+ fcpim->num_tskim_reqs = cfg->fwcfg.num_tskim_reqs;
+ fcpim->path_tov = cfg->drvcfg.path_tov;
+ fcpim->delay_comp = cfg->drvcfg.delay_comp;
+
+ bfa_itnim_attach(fcpim, meminfo);
+ bfa_tskim_attach(fcpim, meminfo);
+ bfa_ioim_attach(fcpim, meminfo);
+}
+
+static void
+bfa_fcpim_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcpim_detach(struct bfa_s *bfa)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+ bfa_ioim_detach(fcpim);
+ bfa_tskim_detach(fcpim);
+}
+
+static void
+bfa_fcpim_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcpim_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcpim_iocdisable(struct bfa_s *bfa)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+ struct bfa_itnim_s *itnim;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &fcpim->itnim_q) {
+ itnim = (struct bfa_itnim_s *) qe;
+ bfa_itnim_iocdisable(itnim);
+ }
+}
+
+void
+bfa_fcpim_path_tov_set(struct bfa_s *bfa, u16 path_tov)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+ fcpim->path_tov = path_tov * 1000;
+ if (fcpim->path_tov > BFA_FCPIM_PATHTOV_MAX)
+ fcpim->path_tov = BFA_FCPIM_PATHTOV_MAX;
+}
+
+u16
+bfa_fcpim_path_tov_get(struct bfa_s *bfa)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+ return (fcpim->path_tov / 1000);
+}
+
+bfa_status_t
+bfa_fcpim_get_modstats(struct bfa_s *bfa, struct bfa_fcpim_stats_s *modstats)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+ *modstats = fcpim->stats;
+
+ return BFA_STATUS_OK;
+}
+
+bfa_status_t
+bfa_fcpim_clr_modstats(struct bfa_s *bfa)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+ memset(&fcpim->stats, 0, sizeof(struct bfa_fcpim_stats_s));
+
+ return BFA_STATUS_OK;
+}
+
+void
+bfa_fcpim_qdepth_set(struct bfa_s *bfa, u16 q_depth)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+ bfa_assert(q_depth <= BFA_IOCFC_QDEPTH_MAX);
+
+ fcpim->q_depth = q_depth;
+}
+
+u16
+bfa_fcpim_qdepth_get(struct bfa_s *bfa)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+
+ return (fcpim->q_depth);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCPIM_PRIV_H__
+#define __BFA_FCPIM_PRIV_H__
+
+#include <bfa_fcpim.h>
+#include <defs/bfa_defs_fcpim.h>
+#include <cs/bfa_wc.h>
+#include "bfa_sgpg_priv.h"
+
+#define BFA_ITNIM_MIN 32
+#define BFA_ITNIM_MAX 1024
+
+#define BFA_IOIM_MIN 8
+#define BFA_IOIM_MAX 2000
+
+#define BFA_TSKIM_MIN 4
+#define BFA_TSKIM_MAX 512
+#define BFA_FCPIM_PATHTOV_DEF (30 * 1000) /* in millisecs */
+#define BFA_FCPIM_PATHTOV_MAX (90 * 1000) /* in millisecs */
+
+#define bfa_fcpim_stats(__fcpim, __stats) \
+ (__fcpim)->stats.__stats ++
+
+struct bfa_fcpim_mod_s {
+ struct bfa_s *bfa;
+ struct bfa_itnim_s *itnim_arr;
+ struct bfa_ioim_s *ioim_arr;
+ struct bfa_ioim_sp_s *ioim_sp_arr;
+ struct bfa_tskim_s *tskim_arr;
+ struct bfa_dma_s snsbase;
+ int num_itnims;
+ int num_ioim_reqs;
+ int num_tskim_reqs;
+ u32 path_tov;
+ u16 q_depth;
+ u16 rsvd;
+ struct list_head itnim_q; /* queue of active itnim */
+ struct list_head ioim_free_q; /* free IO resources */
+ struct list_head ioim_resfree_q; /* IOs waiting for f/w */
+ struct list_head ioim_comp_q; /* IO global comp Q */
+ struct list_head tskim_free_q;
+ u32 ios_active; /* current active IOs */
+ u32 delay_comp;
+ struct bfa_fcpim_stats_s stats;
+};
+
+struct bfa_ioim_s;
+struct bfa_tskim_s;
+
+/**
+ * BFA IO (initiator mode)
+ */
+struct bfa_ioim_s {
+ struct list_head qe; /* queue elememt */
+ bfa_sm_t sm; /* BFA ioim state machine */
+ struct bfa_s *bfa; /* BFA module */
+ struct bfa_fcpim_mod_s *fcpim; /* parent fcpim module */
+ struct bfa_itnim_s *itnim; /* i-t-n nexus for this IO */
+ struct bfad_ioim_s *dio; /* driver IO handle */
+ u16 iotag; /* FWI IO tag */
+ u16 abort_tag; /* unqiue abort request tag */
+ u16 nsges; /* number of SG elements */
+ u16 nsgpgs; /* number of SG pages */
+ struct bfa_sgpg_s *sgpg; /* first SG page */
+ struct list_head sgpg_q; /* allocated SG pages */
+ struct bfa_cb_qe_s hcb_qe; /* bfa callback qelem */
+ bfa_cb_cbfn_t io_cbfn; /* IO completion handler */
+ struct bfa_ioim_sp_s *iosp; /* slow-path IO handling */
+};
+
+struct bfa_ioim_sp_s {
+ struct bfi_msg_s comp_rspmsg; /* IO comp f/w response */
+ u8 *snsinfo; /* sense info for this IO */
+ struct bfa_sgpg_wqe_s sgpg_wqe; /* waitq elem for sgpg */
+ struct bfa_reqq_wait_s reqq_wait; /* to wait for room in reqq */
+ bfa_boolean_t abort_explicit; /* aborted by OS */
+ struct bfa_tskim_s *tskim; /* Relevant TM cmd */
+};
+
+/**
+ * BFA Task management command (initiator mode)
+ */
+struct bfa_tskim_s {
+ struct list_head qe;
+ bfa_sm_t sm;
+ struct bfa_s *bfa; /* BFA module */
+ struct bfa_fcpim_mod_s *fcpim; /* parent fcpim module */
+ struct bfa_itnim_s *itnim; /* i-t-n nexus for this IO */
+ struct bfad_tskim_s *dtsk; /* driver task mgmt cmnd */
+ bfa_boolean_t notify; /* notify itnim on TM comp */
+ lun_t lun; /* lun if applicable */
+ enum fcp_tm_cmnd tm_cmnd; /* task management command */
+ u16 tsk_tag; /* FWI IO tag */
+ u8 tsecs; /* timeout in seconds */
+ struct bfa_reqq_wait_s reqq_wait; /* to wait for room in reqq */
+ struct list_head io_q; /* queue of affected IOs */
+ struct bfa_wc_s wc; /* waiting counter */
+ struct bfa_cb_qe_s hcb_qe; /* bfa callback qelem */
+ enum bfi_tskim_status tsk_status; /* TM status */
+};
+
+/**
+ * BFA i-t-n (initiator mode)
+ */
+struct bfa_itnim_s {
+ struct list_head qe; /* queue element */
+ bfa_sm_t sm; /* i-t-n im BFA state machine */
+ struct bfa_s *bfa; /* bfa instance */
+ struct bfa_rport_s *rport; /* bfa rport */
+ void *ditn; /* driver i-t-n structure */
+ struct bfi_mhdr_s mhdr; /* pre-built mhdr */
+ u8 msg_no; /* itnim/rport firmware handle */
+ u8 reqq; /* CQ for requests */
+ struct bfa_cb_qe_s hcb_qe; /* bfa callback qelem */
+ struct list_head pending_q; /* queue of pending IO requests*/
+ struct list_head io_q; /* queue of active IO requests */
+ struct list_head io_cleanup_q; /* IO being cleaned up */
+ struct list_head tsk_q; /* queue of active TM commands */
+ struct list_head delay_comp_q;/* queue of failed inflight cmds */
+ bfa_boolean_t seq_rec; /* SQER supported */
+ bfa_boolean_t is_online; /* itnim is ONLINE for IO */
+ bfa_boolean_t iotov_active; /* IO TOV timer is active */
+ struct bfa_wc_s wc; /* waiting counter */
+ struct bfa_timer_s timer; /* pending IO TOV */
+ struct bfa_reqq_wait_s reqq_wait; /* to wait for room in reqq */
+ struct bfa_fcpim_mod_s *fcpim; /* fcpim module */
+ struct bfa_itnim_hal_stats_s stats;
+};
+
+#define bfa_itnim_is_online(_itnim) (_itnim)->is_online
+#define BFA_FCPIM_MOD(_hal) (&(_hal)->modules.fcpim_mod)
+#define BFA_IOIM_FROM_TAG(_fcpim, _iotag) \
+ (&fcpim->ioim_arr[_iotag])
+#define BFA_TSKIM_FROM_TAG(_fcpim, _tmtag) \
+ (&fcpim->tskim_arr[_tmtag & (fcpim->num_tskim_reqs - 1)])
+
+/*
+ * function prototypes
+ */
+void bfa_ioim_attach(struct bfa_fcpim_mod_s *fcpim,
+ struct bfa_meminfo_s *minfo);
+void bfa_ioim_detach(struct bfa_fcpim_mod_s *fcpim);
+void bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+void bfa_ioim_good_comp_isr(struct bfa_s *bfa,
+ struct bfi_msg_s *msg);
+void bfa_ioim_cleanup(struct bfa_ioim_s *ioim);
+void bfa_ioim_cleanup_tm(struct bfa_ioim_s *ioim,
+ struct bfa_tskim_s *tskim);
+void bfa_ioim_iocdisable(struct bfa_ioim_s *ioim);
+void bfa_ioim_tov(struct bfa_ioim_s *ioim);
+
+void bfa_tskim_attach(struct bfa_fcpim_mod_s *fcpim,
+ struct bfa_meminfo_s *minfo);
+void bfa_tskim_detach(struct bfa_fcpim_mod_s *fcpim);
+void bfa_tskim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+void bfa_tskim_iodone(struct bfa_tskim_s *tskim);
+void bfa_tskim_iocdisable(struct bfa_tskim_s *tskim);
+void bfa_tskim_cleanup(struct bfa_tskim_s *tskim);
+
+void bfa_itnim_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+ u32 *dm_len);
+void bfa_itnim_attach(struct bfa_fcpim_mod_s *fcpim,
+ struct bfa_meminfo_s *minfo);
+void bfa_itnim_detach(struct bfa_fcpim_mod_s *fcpim);
+void bfa_itnim_iocdisable(struct bfa_itnim_s *itnim);
+void bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+void bfa_itnim_iodone(struct bfa_itnim_s *itnim);
+void bfa_itnim_tskdone(struct bfa_itnim_s *itnim);
+bfa_boolean_t bfa_itnim_hold_io(struct bfa_itnim_s *itnim);
+
+#endif /* __BFA_FCPIM_PRIV_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_pport.h>
+#include <cs/bfa_debug.h>
+#include <aen/bfa_aen.h>
+#include <cs/bfa_plog.h>
+#include <aen/bfa_aen_port.h>
+
+BFA_TRC_FILE(HAL, PPORT);
+BFA_MODULE(pport);
+
+#define bfa_pport_callback(__pport, __event) do { \
+ if ((__pport)->bfa->fcs) { \
+ (__pport)->event_cbfn((__pport)->event_cbarg, (__event)); \
+ } else { \
+ (__pport)->hcb_event = (__event); \
+ bfa_cb_queue((__pport)->bfa, &(__pport)->hcb_qe, \
+ __bfa_cb_port_event, (__pport)); \
+ } \
+} while (0)
+
+/*
+ * The port is considered disabled if corresponding physical port or IOC are
+ * disabled explicitly
+ */
+#define BFA_PORT_IS_DISABLED(bfa) \
+ ((bfa_pport_is_disabled(bfa) == BFA_TRUE) || \
+ (bfa_ioc_is_disabled(&bfa->ioc) == BFA_TRUE))
+
+/*
+ * forward declarations
+ */
+static bfa_boolean_t bfa_pport_send_enable(struct bfa_pport_s *port);
+static bfa_boolean_t bfa_pport_send_disable(struct bfa_pport_s *port);
+static void bfa_pport_update_linkinfo(struct bfa_pport_s *pport);
+static void bfa_pport_reset_linkinfo(struct bfa_pport_s *pport);
+static void bfa_pport_set_wwns(struct bfa_pport_s *port);
+static void __bfa_cb_port_event(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_port_stats(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_port_stats_clr(void *cbarg, bfa_boolean_t complete);
+static void bfa_port_stats_timeout(void *cbarg);
+static void bfa_port_stats_clr_timeout(void *cbarg);
+
+/**
+ * bfa_pport_private
+ */
+
+/**
+ * BFA port state machine events
+ */
+enum bfa_pport_sm_event {
+ BFA_PPORT_SM_START = 1, /* start port state machine */
+ BFA_PPORT_SM_STOP = 2, /* stop port state machine */
+ BFA_PPORT_SM_ENABLE = 3, /* enable port */
+ BFA_PPORT_SM_DISABLE = 4, /* disable port state machine */
+ BFA_PPORT_SM_FWRSP = 5, /* firmware enable/disable rsp */
+ BFA_PPORT_SM_LINKUP = 6, /* firmware linkup event */
+ BFA_PPORT_SM_LINKDOWN = 7, /* firmware linkup down */
+ BFA_PPORT_SM_QRESUME = 8, /* CQ space available */
+ BFA_PPORT_SM_HWFAIL = 9, /* IOC h/w failure */
+};
+
+static void bfa_pport_sm_uninit(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_enabling_qwait(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_enabling(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_linkdown(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_linkup(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_disabling(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_disabling_qwait(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_disabled(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_stopped(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_iocdown(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+static void bfa_pport_sm_iocfail(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event);
+
+static struct bfa_sm_table_s hal_pport_sm_table[] = {
+ {BFA_SM(bfa_pport_sm_uninit), BFA_PPORT_ST_UNINIT},
+ {BFA_SM(bfa_pport_sm_enabling_qwait), BFA_PPORT_ST_ENABLING_QWAIT},
+ {BFA_SM(bfa_pport_sm_enabling), BFA_PPORT_ST_ENABLING},
+ {BFA_SM(bfa_pport_sm_linkdown), BFA_PPORT_ST_LINKDOWN},
+ {BFA_SM(bfa_pport_sm_linkup), BFA_PPORT_ST_LINKUP},
+ {BFA_SM(bfa_pport_sm_disabling_qwait),
+ BFA_PPORT_ST_DISABLING_QWAIT},
+ {BFA_SM(bfa_pport_sm_disabling), BFA_PPORT_ST_DISABLING},
+ {BFA_SM(bfa_pport_sm_disabled), BFA_PPORT_ST_DISABLED},
+ {BFA_SM(bfa_pport_sm_stopped), BFA_PPORT_ST_STOPPED},
+ {BFA_SM(bfa_pport_sm_iocdown), BFA_PPORT_ST_IOCDOWN},
+ {BFA_SM(bfa_pport_sm_iocfail), BFA_PPORT_ST_IOCDOWN},
+};
+
+static void
+bfa_pport_aen_post(struct bfa_pport_s *pport, enum bfa_port_aen_event event)
+{
+ union bfa_aen_data_u aen_data;
+ struct bfa_log_mod_s *logmod = pport->bfa->logm;
+ wwn_t pwwn = pport->pwwn;
+ char pwwn_ptr[BFA_STRING_32];
+ struct bfa_ioc_attr_s ioc_attr;
+
+ wwn2str(pwwn_ptr, pwwn);
+ switch (event) {
+ case BFA_PORT_AEN_ONLINE:
+ bfa_log(logmod, BFA_AEN_PORT_ONLINE, pwwn_ptr);
+ break;
+ case BFA_PORT_AEN_OFFLINE:
+ bfa_log(logmod, BFA_AEN_PORT_OFFLINE, pwwn_ptr);
+ break;
+ case BFA_PORT_AEN_ENABLE:
+ bfa_log(logmod, BFA_AEN_PORT_ENABLE, pwwn_ptr);
+ break;
+ case BFA_PORT_AEN_DISABLE:
+ bfa_log(logmod, BFA_AEN_PORT_DISABLE, pwwn_ptr);
+ break;
+ case BFA_PORT_AEN_DISCONNECT:
+ bfa_log(logmod, BFA_AEN_PORT_DISCONNECT, pwwn_ptr);
+ break;
+ case BFA_PORT_AEN_QOS_NEG:
+ bfa_log(logmod, BFA_AEN_PORT_QOS_NEG, pwwn_ptr);
+ break;
+ default:
+ break;
+ }
+
+ bfa_ioc_get_attr(&pport->bfa->ioc, &ioc_attr);
+ aen_data.port.ioc_type = ioc_attr.ioc_type;
+ aen_data.port.pwwn = pwwn;
+}
+
+static void
+bfa_pport_sm_uninit(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_START:
+ /**
+ * Start event after IOC is configured and BFA is started.
+ */
+ if (bfa_pport_send_enable(pport))
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+ else
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+ break;
+
+ case BFA_PPORT_SM_ENABLE:
+ /**
+ * Port is persistently configured to be in enabled state. Do
+ * not change state. Port enabling is done when START event is
+ * received.
+ */
+ break;
+
+ case BFA_PPORT_SM_DISABLE:
+ /**
+ * If a port is persistently configured to be disabled, the
+ * first event will a port disable request.
+ */
+ bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+ break;
+
+ case BFA_PPORT_SM_HWFAIL:
+ bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+ break;
+
+ default:
+ bfa_sm_fault(pport->bfa, event);
+ }
+}
+
+static void
+bfa_pport_sm_enabling_qwait(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_QRESUME:
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+ bfa_pport_send_enable(pport);
+ break;
+
+ case BFA_PPORT_SM_STOP:
+ bfa_reqq_wcancel(&pport->reqq_wait);
+ bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+ break;
+
+ case BFA_PPORT_SM_ENABLE:
+ /**
+ * Already enable is in progress.
+ */
+ break;
+
+ case BFA_PPORT_SM_DISABLE:
+ /**
+ * Just send disable request to firmware when room becomes
+ * available in request queue.
+ */
+ bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+ bfa_reqq_wcancel(&pport->reqq_wait);
+ bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+ BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+ break;
+
+ case BFA_PPORT_SM_LINKUP:
+ case BFA_PPORT_SM_LINKDOWN:
+ /**
+ * Possible to get link events when doing back-to-back
+ * enable/disables.
+ */
+ break;
+
+ case BFA_PPORT_SM_HWFAIL:
+ bfa_reqq_wcancel(&pport->reqq_wait);
+ bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+ break;
+
+ default:
+ bfa_sm_fault(pport->bfa, event);
+ }
+}
+
+static void
+bfa_pport_sm_enabling(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_FWRSP:
+ case BFA_PPORT_SM_LINKDOWN:
+ bfa_sm_set_state(pport, bfa_pport_sm_linkdown);
+ break;
+
+ case BFA_PPORT_SM_LINKUP:
+ bfa_pport_update_linkinfo(pport);
+ bfa_sm_set_state(pport, bfa_pport_sm_linkup);
+
+ bfa_assert(pport->event_cbfn);
+ bfa_pport_callback(pport, BFA_PPORT_LINKUP);
+ break;
+
+ case BFA_PPORT_SM_ENABLE:
+ /**
+ * Already being enabled.
+ */
+ break;
+
+ case BFA_PPORT_SM_DISABLE:
+ if (bfa_pport_send_disable(pport))
+ bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+ else
+ bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+
+ bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+ BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+ break;
+
+ case BFA_PPORT_SM_STOP:
+ bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+ break;
+
+ case BFA_PPORT_SM_HWFAIL:
+ bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+ break;
+
+ default:
+ bfa_sm_fault(pport->bfa, event);
+ }
+}
+
+static void
+bfa_pport_sm_linkdown(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_LINKUP:
+ bfa_pport_update_linkinfo(pport);
+ bfa_sm_set_state(pport, bfa_pport_sm_linkup);
+ bfa_assert(pport->event_cbfn);
+ bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+ BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkup");
+ bfa_pport_callback(pport, BFA_PPORT_LINKUP);
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_ONLINE);
+ /**
+ * If QoS is enabled and it is not online,
+ * Send a separate event.
+ */
+ if ((pport->cfg.qos_enabled)
+ && (bfa_os_ntohl(pport->qos_attr.state) != BFA_QOS_ONLINE))
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_QOS_NEG);
+
+ break;
+
+ case BFA_PPORT_SM_LINKDOWN:
+ /**
+ * Possible to get link down event.
+ */
+ break;
+
+ case BFA_PPORT_SM_ENABLE:
+ /**
+ * Already enabled.
+ */
+ break;
+
+ case BFA_PPORT_SM_DISABLE:
+ if (bfa_pport_send_disable(pport))
+ bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+ else
+ bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+
+ bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+ BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+ break;
+
+ case BFA_PPORT_SM_STOP:
+ bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+ break;
+
+ case BFA_PPORT_SM_HWFAIL:
+ bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+ break;
+
+ default:
+ bfa_sm_fault(pport->bfa, event);
+ }
+}
+
+static void
+bfa_pport_sm_linkup(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_ENABLE:
+ /**
+ * Already enabled.
+ */
+ break;
+
+ case BFA_PPORT_SM_DISABLE:
+ if (bfa_pport_send_disable(pport))
+ bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+ else
+ bfa_sm_set_state(pport, bfa_pport_sm_disabling_qwait);
+
+ bfa_pport_reset_linkinfo(pport);
+ bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
+ bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+ BFA_PL_EID_PORT_DISABLE, 0, "Port Disable");
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_DISABLE);
+ break;
+
+ case BFA_PPORT_SM_LINKDOWN:
+ bfa_sm_set_state(pport, bfa_pport_sm_linkdown);
+ bfa_pport_reset_linkinfo(pport);
+ bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
+ bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+ BFA_PL_EID_PORT_ST_CHANGE, 0, "Port Linkdown");
+ if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+ } else {
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+ }
+ break;
+
+ case BFA_PPORT_SM_STOP:
+ bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+ bfa_pport_reset_linkinfo(pport);
+ if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+ } else {
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+ }
+ break;
+
+ case BFA_PPORT_SM_HWFAIL:
+ bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+ bfa_pport_reset_linkinfo(pport);
+ bfa_pport_callback(pport, BFA_PPORT_LINKDOWN);
+ if (BFA_PORT_IS_DISABLED(pport->bfa)) {
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_OFFLINE);
+ } else {
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_DISCONNECT);
+ }
+ break;
+
+ default:
+ bfa_sm_fault(pport->bfa, event);
+ }
+}
+
+static void
+bfa_pport_sm_disabling_qwait(struct bfa_pport_s *pport,
+ enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_QRESUME:
+ bfa_sm_set_state(pport, bfa_pport_sm_disabling);
+ bfa_pport_send_disable(pport);
+ break;
+
+ case BFA_PPORT_SM_STOP:
+ bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+ bfa_reqq_wcancel(&pport->reqq_wait);
+ break;
+
+ case BFA_PPORT_SM_DISABLE:
+ /**
+ * Already being disabled.
+ */
+ break;
+
+ case BFA_PPORT_SM_LINKUP:
+ case BFA_PPORT_SM_LINKDOWN:
+ /**
+ * Possible to get link events when doing back-to-back
+ * enable/disables.
+ */
+ break;
+
+ case BFA_PPORT_SM_HWFAIL:
+ bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
+ bfa_reqq_wcancel(&pport->reqq_wait);
+ break;
+
+ default:
+ bfa_sm_fault(pport->bfa, event);
+ }
+}
+
+static void
+bfa_pport_sm_disabling(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_FWRSP:
+ bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+ break;
+
+ case BFA_PPORT_SM_DISABLE:
+ /**
+ * Already being disabled.
+ */
+ break;
+
+ case BFA_PPORT_SM_ENABLE:
+ if (bfa_pport_send_enable(pport))
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+ else
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+
+ bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+ BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_ENABLE);
+ break;
+
+ case BFA_PPORT_SM_STOP:
+ bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+ break;
+
+ case BFA_PPORT_SM_LINKUP:
+ case BFA_PPORT_SM_LINKDOWN:
+ /**
+ * Possible to get link events when doing back-to-back
+ * enable/disables.
+ */
+ break;
+
+ case BFA_PPORT_SM_HWFAIL:
+ bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
+ break;
+
+ default:
+ bfa_sm_fault(pport->bfa, event);
+ }
+}
+
+static void
+bfa_pport_sm_disabled(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_START:
+ /**
+ * Ignore start event for a port that is disabled.
+ */
+ break;
+
+ case BFA_PPORT_SM_STOP:
+ bfa_sm_set_state(pport, bfa_pport_sm_stopped);
+ break;
+
+ case BFA_PPORT_SM_ENABLE:
+ if (bfa_pport_send_enable(pport))
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+ else
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+
+ bfa_plog_str(pport->bfa->plog, BFA_PL_MID_HAL,
+ BFA_PL_EID_PORT_ENABLE, 0, "Port Enable");
+ bfa_pport_aen_post(pport, BFA_PORT_AEN_ENABLE);
+ break;
+
+ case BFA_PPORT_SM_DISABLE:
+ /**
+ * Already disabled.
+ */
+ break;
+
+ case BFA_PPORT_SM_HWFAIL:
+ bfa_sm_set_state(pport, bfa_pport_sm_iocfail);
+ break;
+
+ default:
+ bfa_sm_fault(pport->bfa, event);
+ }
+}
+
+static void
+bfa_pport_sm_stopped(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_START:
+ if (bfa_pport_send_enable(pport))
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+ else
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+ break;
+
+ default:
+ /**
+ * Ignore all other events.
+ */
+ ;
+ }
+}
+
+/**
+ * Port is enabled. IOC is down/failed.
+ */
+static void
+bfa_pport_sm_iocdown(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_START:
+ if (bfa_pport_send_enable(pport))
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling);
+ else
+ bfa_sm_set_state(pport, bfa_pport_sm_enabling_qwait);
+ break;
+
+ default:
+ /**
+ * Ignore all events.
+ */
+ ;
+ }
+}
+
+/**
+ * Port is disabled. IOC is down/failed.
+ */
+static void
+bfa_pport_sm_iocfail(struct bfa_pport_s *pport, enum bfa_pport_sm_event event)
+{
+ bfa_trc(pport->bfa, event);
+
+ switch (event) {
+ case BFA_PPORT_SM_START:
+ bfa_sm_set_state(pport, bfa_pport_sm_disabled);
+ break;
+
+ case BFA_PPORT_SM_ENABLE:
+ bfa_sm_set_state(pport, bfa_pport_sm_iocdown);
+ break;
+
+ default:
+ /**
+ * Ignore all events.
+ */
+ ;
+ }
+}
+
+
+
+/**
+ * bfa_pport_private
+ */
+
+static void
+__bfa_cb_port_event(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_pport_s *pport = cbarg;
+
+ if (complete)
+ pport->event_cbfn(pport->event_cbarg, pport->hcb_event);
+}
+
+#define PPORT_STATS_DMA_SZ (BFA_ROUNDUP(sizeof(union bfa_pport_stats_u), \
+ BFA_CACHELINE_SZ))
+
+static void
+bfa_pport_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,
+ u32 *dm_len)
+{
+ *dm_len += PPORT_STATS_DMA_SZ;
+}
+
+static void
+bfa_pport_qresume(void *cbarg)
+{
+ struct bfa_pport_s *port = cbarg;
+
+ bfa_sm_send_event(port, BFA_PPORT_SM_QRESUME);
+}
+
+static void
+bfa_pport_mem_claim(struct bfa_pport_s *pport, struct bfa_meminfo_s *meminfo)
+{
+ u8 *dm_kva;
+ u64 dm_pa;
+
+ dm_kva = bfa_meminfo_dma_virt(meminfo);
+ dm_pa = bfa_meminfo_dma_phys(meminfo);
+
+ pport->stats_kva = dm_kva;
+ pport->stats_pa = dm_pa;
+ pport->stats = (union bfa_pport_stats_u *)dm_kva;
+
+ dm_kva += PPORT_STATS_DMA_SZ;
+ dm_pa += PPORT_STATS_DMA_SZ;
+
+ bfa_meminfo_dma_virt(meminfo) = dm_kva;
+ bfa_meminfo_dma_phys(meminfo) = dm_pa;
+}
+
+/**
+ * Memory initialization.
+ */
+static void
+bfa_pport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+ struct bfa_pport_cfg_s *port_cfg = &pport->cfg;
+
+ bfa_os_memset(pport, 0, sizeof(struct bfa_pport_s));
+ pport->bfa = bfa;
+
+ bfa_pport_mem_claim(pport, meminfo);
+
+ bfa_sm_set_state(pport, bfa_pport_sm_uninit);
+
+ /**
+ * initialize and set default configuration
+ */
+ port_cfg->topology = BFA_PPORT_TOPOLOGY_P2P;
+ port_cfg->speed = BFA_PPORT_SPEED_AUTO;
+ port_cfg->trunked = BFA_FALSE;
+ port_cfg->maxfrsize = 0;
+
+ port_cfg->trl_def_speed = BFA_PPORT_SPEED_1GBPS;
+
+ bfa_reqq_winit(&pport->reqq_wait, bfa_pport_qresume, pport);
+}
+
+static void
+bfa_pport_initdone(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ /**
+ * Initialize port attributes from IOC hardware data.
+ */
+ bfa_pport_set_wwns(pport);
+ if (pport->cfg.maxfrsize == 0)
+ pport->cfg.maxfrsize = bfa_ioc_maxfrsize(&bfa->ioc);
+ pport->cfg.rx_bbcredit = bfa_ioc_rx_bbcredit(&bfa->ioc);
+ pport->speed_sup = bfa_ioc_speed_sup(&bfa->ioc);
+
+ bfa_assert(pport->cfg.maxfrsize);
+ bfa_assert(pport->cfg.rx_bbcredit);
+ bfa_assert(pport->speed_sup);
+}
+
+static void
+bfa_pport_detach(struct bfa_s *bfa)
+{
+}
+
+/**
+ * Called when IOC is ready.
+ */
+static void
+bfa_pport_start(struct bfa_s *bfa)
+{
+ bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_START);
+}
+
+/**
+ * Called before IOC is stopped.
+ */
+static void
+bfa_pport_stop(struct bfa_s *bfa)
+{
+ bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_STOP);
+}
+
+/**
+ * Called when IOC failure is detected.
+ */
+static void
+bfa_pport_iocdisable(struct bfa_s *bfa)
+{
+ bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_HWFAIL);
+}
+
+static void
+bfa_pport_update_linkinfo(struct bfa_pport_s *pport)
+{
+ struct bfi_pport_event_s *pevent = pport->event_arg.i2hmsg.event;
+
+ pport->speed = pevent->link_state.speed;
+ pport->topology = pevent->link_state.topology;
+
+ if (pport->topology == BFA_PPORT_TOPOLOGY_LOOP)
+ pport->myalpa = pevent->link_state.tl.loop_info.myalpa;
+
+ /*
+ * QoS Details
+ */
+ bfa_os_assign(pport->qos_attr, pevent->link_state.qos_attr);
+ bfa_os_assign(pport->qos_vc_attr, pevent->link_state.qos_vc_attr);
+
+ bfa_trc(pport->bfa, pport->speed);
+ bfa_trc(pport->bfa, pport->topology);
+}
+
+static void
+bfa_pport_reset_linkinfo(struct bfa_pport_s *pport)
+{
+ pport->speed = BFA_PPORT_SPEED_UNKNOWN;
+ pport->topology = BFA_PPORT_TOPOLOGY_NONE;
+}
+
+/**
+ * Send port enable message to firmware.
+ */
+static bfa_boolean_t
+bfa_pport_send_enable(struct bfa_pport_s *port)
+{
+ struct bfi_pport_enable_req_s *m;
+
+ /**
+ * Increment message tag before queue check, so that responses to old
+ * requests are discarded.
+ */
+ port->msgtag++;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+ if (!m) {
+ bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->reqq_wait);
+ return BFA_FALSE;
+ }
+
+ bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_ENABLE_REQ,
+ bfa_lpuid(port->bfa));
+ m->nwwn = port->nwwn;
+ m->pwwn = port->pwwn;
+ m->port_cfg = port->cfg;
+ m->msgtag = port->msgtag;
+ m->port_cfg.maxfrsize = bfa_os_htons(port->cfg.maxfrsize);
+ bfa_dma_be_addr_set(m->stats_dma_addr, port->stats_pa);
+ bfa_trc(port->bfa, m->stats_dma_addr.a32.addr_lo);
+ bfa_trc(port->bfa, m->stats_dma_addr.a32.addr_hi);
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+ return BFA_TRUE;
+}
+
+/**
+ * Send port disable message to firmware.
+ */
+static bfa_boolean_t
+bfa_pport_send_disable(struct bfa_pport_s *port)
+{
+ bfi_pport_disable_req_t *m;
+
+ /**
+ * Increment message tag before queue check, so that responses to old
+ * requests are discarded.
+ */
+ port->msgtag++;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+ if (!m) {
+ bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->reqq_wait);
+ return BFA_FALSE;
+ }
+
+ bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_DISABLE_REQ,
+ bfa_lpuid(port->bfa));
+ m->msgtag = port->msgtag;
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+
+ return BFA_TRUE;
+}
+
+static void
+bfa_pport_set_wwns(struct bfa_pport_s *port)
+{
+ port->pwwn = bfa_ioc_get_pwwn(&port->bfa->ioc);
+ port->nwwn = bfa_ioc_get_nwwn(&port->bfa->ioc);
+
+ bfa_trc(port->bfa, port->pwwn);
+ bfa_trc(port->bfa, port->nwwn);
+}
+
+static void
+bfa_port_send_txcredit(void *port_cbarg)
+{
+
+ struct bfa_pport_s *port = port_cbarg;
+ struct bfi_pport_set_svc_params_req_s *m;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+ if (!m) {
+ bfa_trc(port->bfa, port->cfg.tx_bbcredit);
+ return;
+ }
+
+ bfi_h2i_set(m->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_SET_SVC_PARAMS_REQ,
+ bfa_lpuid(port->bfa));
+ m->tx_bbcredit = bfa_os_htons((u16) port->cfg.tx_bbcredit);
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+}
+
+
+
+/**
+ * bfa_pport_public
+ */
+
+/**
+ * Firmware message handler.
+ */
+void
+bfa_pport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+ union bfi_pport_i2h_msg_u i2hmsg;
+
+ i2hmsg.msg = msg;
+ pport->event_arg.i2hmsg = i2hmsg;
+
+ switch (msg->mhdr.msg_id) {
+ case BFI_PPORT_I2H_ENABLE_RSP:
+ if (pport->msgtag == i2hmsg.enable_rsp->msgtag)
+ bfa_sm_send_event(pport, BFA_PPORT_SM_FWRSP);
+ break;
+
+ case BFI_PPORT_I2H_DISABLE_RSP:
+ if (pport->msgtag == i2hmsg.enable_rsp->msgtag)
+ bfa_sm_send_event(pport, BFA_PPORT_SM_FWRSP);
+ break;
+
+ case BFI_PPORT_I2H_EVENT:
+ switch (i2hmsg.event->link_state.linkstate) {
+ case BFA_PPORT_LINKUP:
+ bfa_sm_send_event(pport, BFA_PPORT_SM_LINKUP);
+ break;
+ case BFA_PPORT_LINKDOWN:
+ bfa_sm_send_event(pport, BFA_PPORT_SM_LINKDOWN);
+ break;
+ case BFA_PPORT_TRUNK_LINKDOWN:
+ /** todo: event notification */
+ break;
+ }
+ break;
+
+ case BFI_PPORT_I2H_GET_STATS_RSP:
+ case BFI_PPORT_I2H_GET_QOS_STATS_RSP:
+ /*
+ * check for timer pop before processing the rsp
+ */
+ if (pport->stats_busy == BFA_FALSE
+ || pport->stats_status == BFA_STATUS_ETIMER)
+ break;
+
+ bfa_timer_stop(&pport->timer);
+ pport->stats_status = i2hmsg.getstats_rsp->status;
+ bfa_cb_queue(pport->bfa, &pport->hcb_qe, __bfa_cb_port_stats,
+ pport);
+ break;
+ case BFI_PPORT_I2H_CLEAR_STATS_RSP:
+ case BFI_PPORT_I2H_CLEAR_QOS_STATS_RSP:
+ /*
+ * check for timer pop before processing the rsp
+ */
+ if (pport->stats_busy == BFA_FALSE
+ || pport->stats_status == BFA_STATUS_ETIMER)
+ break;
+
+ bfa_timer_stop(&pport->timer);
+ pport->stats_status = BFA_STATUS_OK;
+ bfa_cb_queue(pport->bfa, &pport->hcb_qe,
+ __bfa_cb_port_stats_clr, pport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * bfa_pport_api
+ */
+
+/**
+ * Registered callback for port events.
+ */
+void
+bfa_pport_event_register(struct bfa_s *bfa,
+ void (*cbfn) (void *cbarg, bfa_pport_event_t event),
+ void *cbarg)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ pport->event_cbfn = cbfn;
+ pport->event_cbarg = cbarg;
+}
+
+bfa_status_t
+bfa_pport_enable(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ if (pport->diag_busy)
+ return (BFA_STATUS_DIAG_BUSY);
+ else if (bfa_sm_cmp_state
+ (BFA_PORT_MOD(bfa), bfa_pport_sm_disabling_qwait))
+ return (BFA_STATUS_DEVBUSY);
+
+ bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_ENABLE);
+ return BFA_STATUS_OK;
+}
+
+bfa_status_t
+bfa_pport_disable(struct bfa_s *bfa)
+{
+ bfa_sm_send_event(BFA_PORT_MOD(bfa), BFA_PPORT_SM_DISABLE);
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Configure port speed.
+ */
+bfa_status_t
+bfa_pport_cfg_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, speed);
+
+ if ((speed != BFA_PPORT_SPEED_AUTO) && (speed > pport->speed_sup)) {
+ bfa_trc(bfa, pport->speed_sup);
+ return BFA_STATUS_UNSUPP_SPEED;
+ }
+
+ pport->cfg.speed = speed;
+
+ return (BFA_STATUS_OK);
+}
+
+/**
+ * Get current speed.
+ */
+enum bfa_pport_speed
+bfa_pport_get_speed(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ return port->speed;
+}
+
+/**
+ * Configure port topology.
+ */
+bfa_status_t
+bfa_pport_cfg_topology(struct bfa_s *bfa, enum bfa_pport_topology topology)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, topology);
+ bfa_trc(bfa, pport->cfg.topology);
+
+ switch (topology) {
+ case BFA_PPORT_TOPOLOGY_P2P:
+ case BFA_PPORT_TOPOLOGY_LOOP:
+ case BFA_PPORT_TOPOLOGY_AUTO:
+ break;
+
+ default:
+ return BFA_STATUS_EINVAL;
+ }
+
+ pport->cfg.topology = topology;
+ return (BFA_STATUS_OK);
+}
+
+/**
+ * Get current topology.
+ */
+enum bfa_pport_topology
+bfa_pport_get_topology(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ return port->topology;
+}
+
+bfa_status_t
+bfa_pport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, alpa);
+ bfa_trc(bfa, pport->cfg.cfg_hardalpa);
+ bfa_trc(bfa, pport->cfg.hardalpa);
+
+ pport->cfg.cfg_hardalpa = BFA_TRUE;
+ pport->cfg.hardalpa = alpa;
+
+ return (BFA_STATUS_OK);
+}
+
+bfa_status_t
+bfa_pport_clr_hardalpa(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, pport->cfg.cfg_hardalpa);
+ bfa_trc(bfa, pport->cfg.hardalpa);
+
+ pport->cfg.cfg_hardalpa = BFA_FALSE;
+ return (BFA_STATUS_OK);
+}
+
+bfa_boolean_t
+bfa_pport_get_hardalpa(struct bfa_s *bfa, u8 *alpa)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ *alpa = port->cfg.hardalpa;
+ return port->cfg.cfg_hardalpa;
+}
+
+u8
+bfa_pport_get_myalpa(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ return port->myalpa;
+}
+
+bfa_status_t
+bfa_pport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxfrsize)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, maxfrsize);
+ bfa_trc(bfa, pport->cfg.maxfrsize);
+
+ /*
+ * with in range
+ */
+ if ((maxfrsize > FC_MAX_PDUSZ) || (maxfrsize < FC_MIN_PDUSZ))
+ return (BFA_STATUS_INVLD_DFSZ);
+
+ /*
+ * power of 2, if not the max frame size of 2112
+ */
+ if ((maxfrsize != FC_MAX_PDUSZ) && (maxfrsize & (maxfrsize - 1)))
+ return (BFA_STATUS_INVLD_DFSZ);
+
+ pport->cfg.maxfrsize = maxfrsize;
+ return (BFA_STATUS_OK);
+}
+
+u16
+bfa_pport_get_maxfrsize(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ return port->cfg.maxfrsize;
+}
+
+u32
+bfa_pport_mypid(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ return port->mypid;
+}
+
+u8
+bfa_pport_get_rx_bbcredit(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ return port->cfg.rx_bbcredit;
+}
+
+void
+bfa_pport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ port->cfg.tx_bbcredit = (u8) tx_bbcredit;
+ bfa_port_send_txcredit(port);
+}
+
+/**
+ * Get port attributes.
+ */
+
+wwn_t
+bfa_pport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+ if (node)
+ return pport->nwwn;
+ else
+ return pport->pwwn;
+}
+
+void
+bfa_pport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_os_memset(attr, 0, sizeof(struct bfa_pport_attr_s));
+
+ attr->nwwn = pport->nwwn;
+ attr->pwwn = pport->pwwn;
+
+ bfa_os_memcpy(&attr->pport_cfg, &pport->cfg,
+ sizeof(struct bfa_pport_cfg_s));
+ /*
+ * speed attributes
+ */
+ attr->pport_cfg.speed = pport->cfg.speed;
+ attr->speed_supported = pport->speed_sup;
+ attr->speed = pport->speed;
+ attr->cos_supported = FC_CLASS_3;
+
+ /*
+ * topology attributes
+ */
+ attr->pport_cfg.topology = pport->cfg.topology;
+ attr->topology = pport->topology;
+
+ /*
+ * beacon attributes
+ */
+ attr->beacon = pport->beacon;
+ attr->link_e2e_beacon = pport->link_e2e_beacon;
+ attr->plog_enabled = bfa_plog_get_setting(pport->bfa->plog);
+
+ attr->pport_cfg.path_tov = bfa_fcpim_path_tov_get(bfa);
+ attr->pport_cfg.q_depth = bfa_fcpim_qdepth_get(bfa);
+ attr->port_state = bfa_sm_to_state(hal_pport_sm_table, pport->sm);
+ if (bfa_ioc_is_disabled(&pport->bfa->ioc))
+ attr->port_state = BFA_PPORT_ST_IOCDIS;
+ else if (bfa_ioc_fw_mismatch(&pport->bfa->ioc))
+ attr->port_state = BFA_PPORT_ST_FWMISMATCH;
+}
+
+static void
+bfa_port_stats_query(void *cbarg)
+{
+ struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+ bfi_pport_get_stats_req_t *msg;
+
+ msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+
+ if (!msg) {
+ port->stats_qfull = BFA_TRUE;
+ bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_stats_query,
+ port);
+ bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
+ return;
+ }
+ port->stats_qfull = BFA_FALSE;
+
+ bfa_os_memset(msg, 0, sizeof(bfi_pport_get_stats_req_t));
+ bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_GET_STATS_REQ,
+ bfa_lpuid(port->bfa));
+ bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+
+ return;
+}
+
+static void
+bfa_port_stats_clear(void *cbarg)
+{
+ struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+ bfi_pport_clear_stats_req_t *msg;
+
+ msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+
+ if (!msg) {
+ port->stats_qfull = BFA_TRUE;
+ bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_stats_clear,
+ port);
+ bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
+ return;
+ }
+ port->stats_qfull = BFA_FALSE;
+
+ bfa_os_memset(msg, 0, sizeof(bfi_pport_clear_stats_req_t));
+ bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_CLEAR_STATS_REQ,
+ bfa_lpuid(port->bfa));
+ bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+ return;
+}
+
+static void
+bfa_port_qos_stats_clear(void *cbarg)
+{
+ struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+ bfi_pport_clear_qos_stats_req_t *msg;
+
+ msg = bfa_reqq_next(port->bfa, BFA_REQQ_PORT);
+
+ if (!msg) {
+ port->stats_qfull = BFA_TRUE;
+ bfa_reqq_winit(&port->stats_reqq_wait, bfa_port_qos_stats_clear,
+ port);
+ bfa_reqq_wait(port->bfa, BFA_REQQ_PORT, &port->stats_reqq_wait);
+ return;
+ }
+ port->stats_qfull = BFA_FALSE;
+
+ bfa_os_memset(msg, 0, sizeof(bfi_pport_clear_qos_stats_req_t));
+ bfi_h2i_set(msg->mh, BFI_MC_FC_PORT, BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ,
+ bfa_lpuid(port->bfa));
+ bfa_reqq_produce(port->bfa, BFA_REQQ_PORT);
+ return;
+}
+
+static void
+bfa_pport_stats_swap(union bfa_pport_stats_u *d, union bfa_pport_stats_u *s)
+{
+ u32 *dip = (u32 *) d;
+ u32 *sip = (u32 *) s;
+ int i;
+
+ /*
+ * Do 64 bit fields swap first
+ */
+ for (i = 0;
+ i <
+ ((sizeof(union bfa_pport_stats_u) -
+ sizeof(struct bfa_qos_stats_s)) / sizeof(u32)); i = i + 2) {
+#ifdef __BIGENDIAN
+ dip[i] = bfa_os_ntohl(sip[i]);
+ dip[i + 1] = bfa_os_ntohl(sip[i + 1]);
+#else
+ dip[i] = bfa_os_ntohl(sip[i + 1]);
+ dip[i + 1] = bfa_os_ntohl(sip[i]);
+#endif
+ }
+
+ /*
+ * Now swap the 32 bit fields
+ */
+ for (; i < (sizeof(union bfa_pport_stats_u) / sizeof(u32)); ++i)
+ dip[i] = bfa_os_ntohl(sip[i]);
+}
+
+static void
+__bfa_cb_port_stats_clr(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_pport_s *port = cbarg;
+
+ if (complete) {
+ port->stats_cbfn(port->stats_cbarg, port->stats_status);
+ } else {
+ port->stats_busy = BFA_FALSE;
+ port->stats_status = BFA_STATUS_OK;
+ }
+}
+
+static void
+bfa_port_stats_clr_timeout(void *cbarg)
+{
+ struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+
+ bfa_trc(port->bfa, port->stats_qfull);
+
+ if (port->stats_qfull) {
+ bfa_reqq_wcancel(&port->stats_reqq_wait);
+ port->stats_qfull = BFA_FALSE;
+ }
+
+ port->stats_status = BFA_STATUS_ETIMER;
+ bfa_cb_queue(port->bfa, &port->hcb_qe, __bfa_cb_port_stats_clr, port);
+}
+
+static void
+__bfa_cb_port_stats(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_pport_s *port = cbarg;
+
+ if (complete) {
+ if (port->stats_status == BFA_STATUS_OK)
+ bfa_pport_stats_swap(port->stats_ret, port->stats);
+ port->stats_cbfn(port->stats_cbarg, port->stats_status);
+ } else {
+ port->stats_busy = BFA_FALSE;
+ port->stats_status = BFA_STATUS_OK;
+ }
+}
+
+static void
+bfa_port_stats_timeout(void *cbarg)
+{
+ struct bfa_pport_s *port = (struct bfa_pport_s *)cbarg;
+
+ bfa_trc(port->bfa, port->stats_qfull);
+
+ if (port->stats_qfull) {
+ bfa_reqq_wcancel(&port->stats_reqq_wait);
+ port->stats_qfull = BFA_FALSE;
+ }
+
+ port->stats_status = BFA_STATUS_ETIMER;
+ bfa_cb_queue(port->bfa, &port->hcb_qe, __bfa_cb_port_stats, port);
+}
+
+#define BFA_PORT_STATS_TOV 1000
+
+/**
+ * Fetch port attributes.
+ */
+bfa_status_t
+bfa_pport_get_stats(struct bfa_s *bfa, union bfa_pport_stats_u *stats,
+ bfa_cb_pport_t cbfn, void *cbarg)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ if (port->stats_busy) {
+ bfa_trc(bfa, port->stats_busy);
+ return (BFA_STATUS_DEVBUSY);
+ }
+
+ port->stats_busy = BFA_TRUE;
+ port->stats_ret = stats;
+ port->stats_cbfn = cbfn;
+ port->stats_cbarg = cbarg;
+
+ bfa_port_stats_query(port);
+
+ bfa_timer_start(bfa, &port->timer, bfa_port_stats_timeout, port,
+ BFA_PORT_STATS_TOV);
+ return (BFA_STATUS_OK);
+}
+
+bfa_status_t
+bfa_pport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ if (port->stats_busy) {
+ bfa_trc(bfa, port->stats_busy);
+ return (BFA_STATUS_DEVBUSY);
+ }
+
+ port->stats_busy = BFA_TRUE;
+ port->stats_cbfn = cbfn;
+ port->stats_cbarg = cbarg;
+
+ bfa_port_stats_clear(port);
+
+ bfa_timer_start(bfa, &port->timer, bfa_port_stats_clr_timeout, port,
+ BFA_PORT_STATS_TOV);
+ return (BFA_STATUS_OK);
+}
+
+bfa_status_t
+bfa_pport_trunk_enable(struct bfa_s *bfa, u8 bitmap)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, bitmap);
+ bfa_trc(bfa, pport->cfg.trunked);
+ bfa_trc(bfa, pport->cfg.trunk_ports);
+
+ if (!bitmap || (bitmap & (bitmap - 1)))
+ return BFA_STATUS_EINVAL;
+
+ pport->cfg.trunked = BFA_TRUE;
+ pport->cfg.trunk_ports = bitmap;
+
+ return BFA_STATUS_OK;
+}
+
+void
+bfa_pport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ qos_attr->state = bfa_os_ntohl(pport->qos_attr.state);
+ qos_attr->total_bb_cr = bfa_os_ntohl(pport->qos_attr.total_bb_cr);
+}
+
+void
+bfa_pport_qos_get_vc_attr(struct bfa_s *bfa,
+ struct bfa_qos_vc_attr_s *qos_vc_attr)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+ struct bfa_qos_vc_attr_s *bfa_vc_attr = &pport->qos_vc_attr;
+ u32 i = 0;
+
+ qos_vc_attr->total_vc_count = bfa_os_ntohs(bfa_vc_attr->total_vc_count);
+ qos_vc_attr->shared_credit = bfa_os_ntohs(bfa_vc_attr->shared_credit);
+ qos_vc_attr->elp_opmode_flags =
+ bfa_os_ntohl(bfa_vc_attr->elp_opmode_flags);
+
+ /*
+ * Individual VC info
+ */
+ while (i < qos_vc_attr->total_vc_count) {
+ qos_vc_attr->vc_info[i].vc_credit =
+ bfa_vc_attr->vc_info[i].vc_credit;
+ qos_vc_attr->vc_info[i].borrow_credit =
+ bfa_vc_attr->vc_info[i].borrow_credit;
+ qos_vc_attr->vc_info[i].priority =
+ bfa_vc_attr->vc_info[i].priority;
+ ++i;
+ }
+}
+
+/**
+ * Fetch QoS Stats.
+ */
+bfa_status_t
+bfa_pport_get_qos_stats(struct bfa_s *bfa, union bfa_pport_stats_u *stats,
+ bfa_cb_pport_t cbfn, void *cbarg)
+{
+ /*
+ * QoS stats is embedded in port stats
+ */
+ return (bfa_pport_get_stats(bfa, stats, cbfn, cbarg));
+}
+
+bfa_status_t
+bfa_pport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn, void *cbarg)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ if (port->stats_busy) {
+ bfa_trc(bfa, port->stats_busy);
+ return (BFA_STATUS_DEVBUSY);
+ }
+
+ port->stats_busy = BFA_TRUE;
+ port->stats_cbfn = cbfn;
+ port->stats_cbarg = cbarg;
+
+ bfa_port_qos_stats_clear(port);
+
+ bfa_timer_start(bfa, &port->timer, bfa_port_stats_clr_timeout, port,
+ BFA_PORT_STATS_TOV);
+ return (BFA_STATUS_OK);
+}
+
+/**
+ * Fetch port attributes.
+ */
+bfa_status_t
+bfa_pport_trunk_disable(struct bfa_s *bfa)
+{
+ return (BFA_STATUS_OK);
+}
+
+bfa_boolean_t
+bfa_pport_trunk_query(struct bfa_s *bfa, u32 *bitmap)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ *bitmap = port->cfg.trunk_ports;
+ return port->cfg.trunked;
+}
+
+bfa_boolean_t
+bfa_pport_is_disabled(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *port = BFA_PORT_MOD(bfa);
+
+ return (bfa_sm_to_state(hal_pport_sm_table, port->sm) ==
+ BFA_PPORT_ST_DISABLED);
+
+}
+
+bfa_boolean_t
+bfa_pport_is_ratelim(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+return (pport->cfg.ratelimit ? BFA_TRUE : BFA_FALSE);
+
+}
+
+void
+bfa_pport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, on_off);
+ bfa_trc(bfa, pport->cfg.qos_enabled);
+
+ pport->cfg.qos_enabled = on_off;
+}
+
+void
+bfa_pport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, on_off);
+ bfa_trc(bfa, pport->cfg.ratelimit);
+
+ pport->cfg.ratelimit = on_off;
+ if (pport->cfg.trl_def_speed == BFA_PPORT_SPEED_UNKNOWN)
+ pport->cfg.trl_def_speed = BFA_PPORT_SPEED_1GBPS;
+}
+
+/**
+ * Configure default minimum ratelim speed
+ */
+bfa_status_t
+bfa_pport_cfg_ratelim_speed(struct bfa_s *bfa, enum bfa_pport_speed speed)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, speed);
+
+ /*
+ * Auto and speeds greater than the supported speed, are invalid
+ */
+ if ((speed == BFA_PPORT_SPEED_AUTO) || (speed > pport->speed_sup)) {
+ bfa_trc(bfa, pport->speed_sup);
+ return BFA_STATUS_UNSUPP_SPEED;
+ }
+
+ pport->cfg.trl_def_speed = speed;
+
+ return (BFA_STATUS_OK);
+}
+
+/**
+ * Get default minimum ratelim speed
+ */
+enum bfa_pport_speed
+bfa_pport_get_ratelim_speed(struct bfa_s *bfa)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, pport->cfg.trl_def_speed);
+ return (pport->cfg.trl_def_speed);
+
+}
+
+void
+bfa_pport_busy(struct bfa_s *bfa, bfa_boolean_t status)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, status);
+ bfa_trc(bfa, pport->diag_busy);
+
+ pport->diag_busy = status;
+}
+
+void
+bfa_pport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
+ bfa_boolean_t link_e2e_beacon)
+{
+ struct bfa_pport_s *pport = BFA_PORT_MOD(bfa);
+
+ bfa_trc(bfa, beacon);
+ bfa_trc(bfa, link_e2e_beacon);
+ bfa_trc(bfa, pport->beacon);
+ bfa_trc(bfa, pport->link_e2e_beacon);
+
+ pport->beacon = beacon;
+ pport->link_e2e_beacon = link_e2e_beacon;
+}
+
+bfa_boolean_t
+bfa_pport_is_linkup(struct bfa_s *bfa)
+{
+ return bfa_sm_cmp_state(BFA_PORT_MOD(bfa), bfa_pport_sm_linkup);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs.c BFA FCS main
+ */
+
+#include <fcs/bfa_fcs.h>
+#include "fcs_port.h"
+#include "fcs_uf.h"
+#include "fcs_vport.h"
+#include "fcs_rport.h"
+#include "fcs_fabric.h"
+#include "fcs_fcpim.h"
+#include "fcs_fcptm.h"
+#include "fcbuild.h"
+#include "fcs.h"
+#include "bfad_drv.h"
+#include <fcb/bfa_fcb.h>
+
+/**
+ * FCS sub-modules
+ */
+struct bfa_fcs_mod_s {
+ void (*modinit) (struct bfa_fcs_s *fcs);
+ void (*modexit) (struct bfa_fcs_s *fcs);
+};
+
+#define BFA_FCS_MODULE(_mod) { _mod ## _modinit, _mod ## _modexit }
+
+static struct bfa_fcs_mod_s fcs_modules[] = {
+ BFA_FCS_MODULE(bfa_fcs_pport),
+ BFA_FCS_MODULE(bfa_fcs_uf),
+ BFA_FCS_MODULE(bfa_fcs_fabric),
+ BFA_FCS_MODULE(bfa_fcs_vport),
+ BFA_FCS_MODULE(bfa_fcs_rport),
+ BFA_FCS_MODULE(bfa_fcs_fcpim),
+};
+
+/**
+ * fcs_api BFA FCS API
+ */
+
+static void
+bfa_fcs_exit_comp(void *fcs_cbarg)
+{
+ struct bfa_fcs_s *fcs = fcs_cbarg;
+ struct bfad_s *bfad = fcs->bfad;
+
+ complete(&bfad->comp);
+}
+
+
+
+/**
+ * fcs_api BFA FCS API
+ */
+
+/**
+ * FCS instance initialization.
+ *
+ * param[in] fcs FCS instance
+ * param[in] bfa BFA instance
+ * param[in] bfad BFA driver instance
+ *
+ * return None
+ */
+void
+bfa_fcs_init(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
+ bfa_boolean_t min_cfg)
+{
+ int i;
+ struct bfa_fcs_mod_s *mod;
+
+ fcs->bfa = bfa;
+ fcs->bfad = bfad;
+ fcs->min_cfg = min_cfg;
+
+ bfa_attach_fcs(bfa);
+ fcbuild_init();
+
+ for (i = 0; i < sizeof(fcs_modules) / sizeof(fcs_modules[0]); i++) {
+ mod = &fcs_modules[i];
+ mod->modinit(fcs);
+ }
+}
+
+/**
+ * Start FCS operations.
+ */
+void
+bfa_fcs_start(struct bfa_fcs_s *fcs)
+{
+ bfa_fcs_fabric_modstart(fcs);
+}
+
+/**
+ * FCS driver details initialization.
+ *
+ * param[in] fcs FCS instance
+ * param[in] driver_info Driver Details
+ *
+ * return None
+ */
+void
+bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
+ struct bfa_fcs_driver_info_s *driver_info)
+{
+
+ fcs->driver_info = *driver_info;
+
+ bfa_fcs_fabric_psymb_init(&fcs->fabric);
+}
+
+/**
+ * FCS instance cleanup and exit.
+ *
+ * param[in] fcs FCS instance
+ * return None
+ */
+void
+bfa_fcs_exit(struct bfa_fcs_s *fcs)
+{
+ struct bfa_fcs_mod_s *mod;
+ int nmods, i;
+
+ bfa_wc_init(&fcs->wc, bfa_fcs_exit_comp, fcs);
+
+ nmods = sizeof(fcs_modules) / sizeof(fcs_modules[0]);
+
+ for (i = 0; i < nmods; i++) {
+ bfa_wc_up(&fcs->wc);
+
+ mod = &fcs_modules[i];
+ mod->modexit(fcs);
+ }
+
+ bfa_wc_wait(&fcs->wc);
+}
+
+
+void
+bfa_fcs_trc_init(struct bfa_fcs_s *fcs, struct bfa_trc_mod_s *trcmod)
+{
+ fcs->trcmod = trcmod;
+}
+
+
+void
+bfa_fcs_log_init(struct bfa_fcs_s *fcs, struct bfa_log_mod_s *logmod)
+{
+ fcs->logm = logmod;
+}
+
+
+void
+bfa_fcs_aen_init(struct bfa_fcs_s *fcs, struct bfa_aen_s *aen)
+{
+ fcs->aen = aen;
+}
+
+void
+bfa_fcs_modexit_comp(struct bfa_fcs_s *fcs)
+{
+ bfa_wc_down(&fcs->wc);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_port.c BFA FCS port
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <fcb/bfa_fcb_port.h>
+#include <bfa_svc.h>
+#include <log/bfa_log_fcs.h>
+#include "fcs.h"
+#include "fcs_lport.h"
+#include "fcs_vport.h"
+#include "fcs_rport.h"
+#include "fcs_fcxp.h"
+#include "fcs_trcmod.h"
+#include "lport_priv.h"
+#include <aen/bfa_aen_lport.h>
+
+BFA_TRC_FILE(FCS, PORT);
+
+/**
+ * Forward declarations
+ */
+
+static void bfa_fcs_port_aen_post(struct bfa_fcs_port_s *port,
+ enum bfa_lport_aen_event event);
+static void bfa_fcs_port_send_ls_rjt(struct bfa_fcs_port_s *port,
+ struct fchs_s *rx_fchs, u8 reason_code,
+ u8 reason_code_expl);
+static void bfa_fcs_port_plogi(struct bfa_fcs_port_s *port,
+ struct fchs_s *rx_fchs,
+ struct fc_logi_s *plogi);
+static void bfa_fcs_port_online_actions(struct bfa_fcs_port_s *port);
+static void bfa_fcs_port_offline_actions(struct bfa_fcs_port_s *port);
+static void bfa_fcs_port_unknown_init(struct bfa_fcs_port_s *port);
+static void bfa_fcs_port_unknown_online(struct bfa_fcs_port_s *port);
+static void bfa_fcs_port_unknown_offline(struct bfa_fcs_port_s *port);
+static void bfa_fcs_port_deleted(struct bfa_fcs_port_s *port);
+static void bfa_fcs_port_echo(struct bfa_fcs_port_s *port,
+ struct fchs_s *rx_fchs,
+ struct fc_echo_s *echo, u16 len);
+static void bfa_fcs_port_rnid(struct bfa_fcs_port_s *port,
+ struct fchs_s *rx_fchs,
+ struct fc_rnid_cmd_s *rnid, u16 len);
+static void bfa_fs_port_get_gen_topo_data(struct bfa_fcs_port_s *port,
+ struct fc_rnid_general_topology_data_s *gen_topo_data);
+
+static struct {
+ void (*init) (struct bfa_fcs_port_s *port);
+ void (*online) (struct bfa_fcs_port_s *port);
+ void (*offline) (struct bfa_fcs_port_s *port);
+} __port_action[] = {
+ {
+ bfa_fcs_port_unknown_init, bfa_fcs_port_unknown_online,
+ bfa_fcs_port_unknown_offline}, {
+ bfa_fcs_port_fab_init, bfa_fcs_port_fab_online,
+ bfa_fcs_port_fab_offline}, {
+ bfa_fcs_port_loop_init, bfa_fcs_port_loop_online,
+ bfa_fcs_port_loop_offline}, {
+bfa_fcs_port_n2n_init, bfa_fcs_port_n2n_online,
+ bfa_fcs_port_n2n_offline},};
+
+/**
+ * fcs_port_sm FCS logical port state machine
+ */
+
+enum bfa_fcs_port_event {
+ BFA_FCS_PORT_SM_CREATE = 1,
+ BFA_FCS_PORT_SM_ONLINE = 2,
+ BFA_FCS_PORT_SM_OFFLINE = 3,
+ BFA_FCS_PORT_SM_DELETE = 4,
+ BFA_FCS_PORT_SM_DELRPORT = 5,
+};
+
+static void bfa_fcs_port_sm_uninit(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event);
+static void bfa_fcs_port_sm_init(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event);
+static void bfa_fcs_port_sm_online(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event);
+static void bfa_fcs_port_sm_offline(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event);
+static void bfa_fcs_port_sm_deleting(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event);
+
+static void
+bfa_fcs_port_sm_uninit(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event)
+{
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_PORT_SM_CREATE:
+ bfa_sm_set_state(port, bfa_fcs_port_sm_init);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_sm_init(struct bfa_fcs_port_s *port, enum bfa_fcs_port_event event)
+{
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_PORT_SM_ONLINE:
+ bfa_sm_set_state(port, bfa_fcs_port_sm_online);
+ bfa_fcs_port_online_actions(port);
+ break;
+
+ case BFA_FCS_PORT_SM_DELETE:
+ bfa_sm_set_state(port, bfa_fcs_port_sm_uninit);
+ bfa_fcs_port_deleted(port);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_sm_online(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event)
+{
+ struct bfa_fcs_rport_s *rport;
+ struct list_head *qe, *qen;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_PORT_SM_OFFLINE:
+ bfa_sm_set_state(port, bfa_fcs_port_sm_offline);
+ bfa_fcs_port_offline_actions(port);
+ break;
+
+ case BFA_FCS_PORT_SM_DELETE:
+
+ __port_action[port->fabric->fab_type].offline(port);
+
+ if (port->num_rports == 0) {
+ bfa_sm_set_state(port, bfa_fcs_port_sm_uninit);
+ bfa_fcs_port_deleted(port);
+ } else {
+ bfa_sm_set_state(port, bfa_fcs_port_sm_deleting);
+ list_for_each_safe(qe, qen, &port->rport_q) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ bfa_fcs_rport_delete(rport);
+ }
+ }
+ break;
+
+ case BFA_FCS_PORT_SM_DELRPORT:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_sm_offline(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event)
+{
+ struct bfa_fcs_rport_s *rport;
+ struct list_head *qe, *qen;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_PORT_SM_ONLINE:
+ bfa_sm_set_state(port, bfa_fcs_port_sm_online);
+ bfa_fcs_port_online_actions(port);
+ break;
+
+ case BFA_FCS_PORT_SM_DELETE:
+ if (port->num_rports == 0) {
+ bfa_sm_set_state(port, bfa_fcs_port_sm_uninit);
+ bfa_fcs_port_deleted(port);
+ } else {
+ bfa_sm_set_state(port, bfa_fcs_port_sm_deleting);
+ list_for_each_safe(qe, qen, &port->rport_q) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ bfa_fcs_rport_delete(rport);
+ }
+ }
+ break;
+
+ case BFA_FCS_PORT_SM_DELRPORT:
+ case BFA_FCS_PORT_SM_OFFLINE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_sm_deleting(struct bfa_fcs_port_s *port,
+ enum bfa_fcs_port_event event)
+{
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_PORT_SM_DELRPORT:
+ if (port->num_rports == 0) {
+ bfa_sm_set_state(port, bfa_fcs_port_sm_uninit);
+ bfa_fcs_port_deleted(port);
+ }
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * fcs_port_pvt
+ */
+
+/**
+ * Send AEN notification
+ */
+static void
+bfa_fcs_port_aen_post(struct bfa_fcs_port_s *port,
+ enum bfa_lport_aen_event event)
+{
+ union bfa_aen_data_u aen_data;
+ struct bfa_log_mod_s *logmod = port->fcs->logm;
+ enum bfa_port_role role = port->port_cfg.roles;
+ wwn_t lpwwn = bfa_fcs_port_get_pwwn(port);
+ char lpwwn_ptr[BFA_STRING_32];
+ char *role_str[BFA_PORT_ROLE_FCP_MAX / 2 + 1] =
+ { "Initiator", "Target", "IPFC" };
+
+ wwn2str(lpwwn_ptr, lpwwn);
+
+ bfa_assert(role <= BFA_PORT_ROLE_FCP_MAX);
+
+ switch (event) {
+ case BFA_LPORT_AEN_ONLINE:
+ bfa_log(logmod, BFA_AEN_LPORT_ONLINE, lpwwn_ptr,
+ role_str[role / 2]);
+ break;
+ case BFA_LPORT_AEN_OFFLINE:
+ bfa_log(logmod, BFA_AEN_LPORT_OFFLINE, lpwwn_ptr,
+ role_str[role / 2]);
+ break;
+ case BFA_LPORT_AEN_NEW:
+ bfa_log(logmod, BFA_AEN_LPORT_NEW, lpwwn_ptr,
+ role_str[role / 2]);
+ break;
+ case BFA_LPORT_AEN_DELETE:
+ bfa_log(logmod, BFA_AEN_LPORT_DELETE, lpwwn_ptr,
+ role_str[role / 2]);
+ break;
+ case BFA_LPORT_AEN_DISCONNECT:
+ bfa_log(logmod, BFA_AEN_LPORT_DISCONNECT, lpwwn_ptr,
+ role_str[role / 2]);
+ break;
+ default:
+ break;
+ }
+
+ aen_data.lport.vf_id = port->fabric->vf_id;
+ aen_data.lport.roles = role;
+ aen_data.lport.ppwwn =
+ bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(port->fcs));
+ aen_data.lport.lpwwn = lpwwn;
+}
+
+/*
+ * Send a LS reject
+ */
+static void
+bfa_fcs_port_send_ls_rjt(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+ u8 reason_code, u8 reason_code_expl)
+{
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_rport_s *bfa_rport = NULL;
+ int len;
+
+ bfa_trc(port->fcs, rx_fchs->s_id);
+
+ fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp)
+ return;
+
+ len = fc_ls_rjt_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+ bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+ reason_code, reason_code_expl);
+
+ bfa_fcxp_send(fcxp, bfa_rport, port->fabric->vf_id, port->lp_tag,
+ BFA_FALSE, FC_CLASS_3, len, &fchs, NULL, NULL,
+ FC_MAX_PDUSZ, 0);
+}
+
+/**
+ * Process incoming plogi from a remote port.
+ */
+static void
+bfa_fcs_port_plogi(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+ struct fc_logi_s *plogi)
+{
+ struct bfa_fcs_rport_s *rport;
+
+ bfa_trc(port->fcs, rx_fchs->d_id);
+ bfa_trc(port->fcs, rx_fchs->s_id);
+
+ /*
+ * If min cfg mode is enabled, drop any incoming PLOGIs
+ */
+ if (__fcs_min_cfg(port->fcs)) {
+ bfa_trc(port->fcs, rx_fchs->s_id);
+ return;
+ }
+
+ if (fc_plogi_parse(rx_fchs) != FC_PARSE_OK) {
+ bfa_trc(port->fcs, rx_fchs->s_id);
+ /*
+ * send a LS reject
+ */
+ bfa_fcs_port_send_ls_rjt(port, rx_fchs,
+ FC_LS_RJT_RSN_PROTOCOL_ERROR,
+ FC_LS_RJT_EXP_SPARMS_ERR_OPTIONS);
+ return;
+ }
+
+ /**
+* Direct Attach P2P mode : verify address assigned by the r-port.
+ */
+ if ((!bfa_fcs_fabric_is_switched(port->fabric))
+ &&
+ (memcmp
+ ((void *)&bfa_fcs_port_get_pwwn(port), (void *)&plogi->port_name,
+ sizeof(wwn_t)) < 0)) {
+ if (BFA_FCS_PID_IS_WKA(rx_fchs->d_id)) {
+ /*
+ * Address assigned to us cannot be a WKA
+ */
+ bfa_fcs_port_send_ls_rjt(port, rx_fchs,
+ FC_LS_RJT_RSN_PROTOCOL_ERROR,
+ FC_LS_RJT_EXP_INVALID_NPORT_ID);
+ return;
+ }
+ port->pid = rx_fchs->d_id;
+ }
+
+ /**
+ * First, check if we know the device by pwwn.
+ */
+ rport = bfa_fcs_port_get_rport_by_pwwn(port, plogi->port_name);
+ if (rport) {
+ /**
+ * Direct Attach P2P mode: handle address assigned by the rport.
+ */
+ if ((!bfa_fcs_fabric_is_switched(port->fabric))
+ &&
+ (memcmp
+ ((void *)&bfa_fcs_port_get_pwwn(port),
+ (void *)&plogi->port_name, sizeof(wwn_t)) < 0)) {
+ port->pid = rx_fchs->d_id;
+ rport->pid = rx_fchs->s_id;
+ }
+ bfa_fcs_rport_plogi(rport, rx_fchs, plogi);
+ return;
+ }
+
+ /**
+ * Next, lookup rport by PID.
+ */
+ rport = bfa_fcs_port_get_rport_by_pid(port, rx_fchs->s_id);
+ if (!rport) {
+ /**
+ * Inbound PLOGI from a new device.
+ */
+ bfa_fcs_rport_plogi_create(port, rx_fchs, plogi);
+ return;
+ }
+
+ /**
+ * Rport is known only by PID.
+ */
+ if (rport->pwwn) {
+ /**
+ * This is a different device with the same pid. Old device
+ * disappeared. Send implicit LOGO to old device.
+ */
+ bfa_assert(rport->pwwn != plogi->port_name);
+ bfa_fcs_rport_logo_imp(rport);
+
+ /**
+ * Inbound PLOGI from a new device (with old PID).
+ */
+ bfa_fcs_rport_plogi_create(port, rx_fchs, plogi);
+ return;
+ }
+
+ /**
+ * PLOGI crossing each other.
+ */
+ bfa_assert(rport->pwwn == WWN_NULL);
+ bfa_fcs_rport_plogi(rport, rx_fchs, plogi);
+}
+
+/*
+ * Process incoming ECHO.
+ * Since it does not require a login, it is processed here.
+ */
+static void
+bfa_fcs_port_echo(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+ struct fc_echo_s *echo, u16 rx_len)
+{
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_rport_s *bfa_rport = NULL;
+ int len, pyld_len;
+
+ bfa_trc(port->fcs, rx_fchs->s_id);
+ bfa_trc(port->fcs, rx_fchs->d_id);
+ bfa_trc(port->fcs, rx_len);
+
+ fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp)
+ return;
+
+ len = fc_ls_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+ bfa_fcs_port_get_fcid(port), rx_fchs->ox_id);
+
+ /*
+ * Copy the payload (if any) from the echo frame
+ */
+ pyld_len = rx_len - sizeof(struct fchs_s);
+ bfa_trc(port->fcs, pyld_len);
+
+ if (pyld_len > len)
+ memcpy(((u8 *) bfa_fcxp_get_reqbuf(fcxp)) +
+ sizeof(struct fc_echo_s), (echo + 1),
+ (pyld_len - sizeof(struct fc_echo_s)));
+
+ bfa_fcxp_send(fcxp, bfa_rport, port->fabric->vf_id, port->lp_tag,
+ BFA_FALSE, FC_CLASS_3, pyld_len, &fchs, NULL, NULL,
+ FC_MAX_PDUSZ, 0);
+}
+
+/*
+ * Process incoming RNID.
+ * Since it does not require a login, it is processed here.
+ */
+static void
+bfa_fcs_port_rnid(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+ struct fc_rnid_cmd_s *rnid, u16 rx_len)
+{
+ struct fc_rnid_common_id_data_s common_id_data;
+ struct fc_rnid_general_topology_data_s gen_topo_data;
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_rport_s *bfa_rport = NULL;
+ u16 len;
+ u32 data_format;
+
+ bfa_trc(port->fcs, rx_fchs->s_id);
+ bfa_trc(port->fcs, rx_fchs->d_id);
+ bfa_trc(port->fcs, rx_len);
+
+ fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp)
+ return;
+
+ /*
+ * Check Node Indentification Data Format
+ * We only support General Topology Discovery Format.
+ * For any other requested Data Formats, we return Common Node Id Data
+ * only, as per FC-LS.
+ */
+ bfa_trc(port->fcs, rnid->node_id_data_format);
+ if (rnid->node_id_data_format == RNID_NODEID_DATA_FORMAT_DISCOVERY) {
+ data_format = RNID_NODEID_DATA_FORMAT_DISCOVERY;
+ /*
+ * Get General topology data for this port
+ */
+ bfa_fs_port_get_gen_topo_data(port, &gen_topo_data);
+ } else {
+ data_format = RNID_NODEID_DATA_FORMAT_COMMON;
+ }
+
+ /*
+ * Copy the Node Id Info
+ */
+ common_id_data.port_name = bfa_fcs_port_get_pwwn(port);
+ common_id_data.node_name = bfa_fcs_port_get_nwwn(port);
+
+ len = fc_rnid_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+ bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+ data_format, &common_id_data, &gen_topo_data);
+
+ bfa_fcxp_send(fcxp, bfa_rport, port->fabric->vf_id, port->lp_tag,
+ BFA_FALSE, FC_CLASS_3, len, &fchs, NULL, NULL,
+ FC_MAX_PDUSZ, 0);
+
+ return;
+}
+
+/*
+ * Fill out General Topolpgy Discovery Data for RNID ELS.
+ */
+static void
+bfa_fs_port_get_gen_topo_data(struct bfa_fcs_port_s *port,
+ struct fc_rnid_general_topology_data_s *gen_topo_data)
+{
+
+ bfa_os_memset(gen_topo_data, 0,
+ sizeof(struct fc_rnid_general_topology_data_s));
+
+ gen_topo_data->asso_type = bfa_os_htonl(RNID_ASSOCIATED_TYPE_HOST);
+ gen_topo_data->phy_port_num = 0; /* @todo */
+ gen_topo_data->num_attached_nodes = bfa_os_htonl(1);
+}
+
+static void
+bfa_fcs_port_online_actions(struct bfa_fcs_port_s *port)
+{
+ bfa_trc(port->fcs, port->fabric->oper_type);
+
+ __port_action[port->fabric->fab_type].init(port);
+ __port_action[port->fabric->fab_type].online(port);
+
+ bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_ONLINE);
+ bfa_fcb_port_online(port->fcs->bfad, port->port_cfg.roles,
+ port->fabric->vf_drv, (port->vport == NULL) ?
+ NULL : port->vport->vport_drv);
+}
+
+static void
+bfa_fcs_port_offline_actions(struct bfa_fcs_port_s *port)
+{
+ struct list_head *qe, *qen;
+ struct bfa_fcs_rport_s *rport;
+
+ bfa_trc(port->fcs, port->fabric->oper_type);
+
+ __port_action[port->fabric->fab_type].offline(port);
+
+ if (bfa_fcs_fabric_is_online(port->fabric) == BFA_TRUE) {
+ bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_DISCONNECT);
+ } else {
+ bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_OFFLINE);
+ }
+ bfa_fcb_port_offline(port->fcs->bfad, port->port_cfg.roles,
+ port->fabric->vf_drv,
+ (port->vport == NULL) ? NULL : port->vport->vport_drv);
+
+ list_for_each_safe(qe, qen, &port->rport_q) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ bfa_fcs_rport_offline(rport);
+ }
+}
+
+static void
+bfa_fcs_port_unknown_init(struct bfa_fcs_port_s *port)
+{
+ bfa_assert(0);
+}
+
+static void
+bfa_fcs_port_unknown_online(struct bfa_fcs_port_s *port)
+{
+ bfa_assert(0);
+}
+
+static void
+bfa_fcs_port_unknown_offline(struct bfa_fcs_port_s *port)
+{
+ bfa_assert(0);
+}
+
+static void
+bfa_fcs_port_deleted(struct bfa_fcs_port_s *port)
+{
+ bfa_fcs_port_aen_post(port, BFA_LPORT_AEN_DELETE);
+
+ /*
+ * Base port will be deleted by the OS driver
+ */
+ if (port->vport) {
+ bfa_fcb_port_delete(port->fcs->bfad, port->port_cfg.roles,
+ port->fabric->vf_drv,
+ port->vport ? port->vport->vport_drv : NULL);
+ bfa_fcs_vport_delete_comp(port->vport);
+ } else {
+ bfa_fcs_fabric_port_delete_comp(port->fabric);
+ }
+}
+
+
+
+/**
+ * fcs_lport_api BFA FCS port API
+ */
+/**
+ * Module initialization
+ */
+void
+bfa_fcs_port_modinit(struct bfa_fcs_s *fcs)
+{
+
+}
+
+/**
+ * Module cleanup
+ */
+void
+bfa_fcs_port_modexit(struct bfa_fcs_s *fcs)
+{
+ bfa_fcs_modexit_comp(fcs);
+}
+
+/**
+ * Unsolicited frame receive handling.
+ */
+void
+bfa_fcs_port_uf_recv(struct bfa_fcs_port_s *lport, struct fchs_s *fchs,
+ u16 len)
+{
+ u32 pid = fchs->s_id;
+ struct bfa_fcs_rport_s *rport = NULL;
+ struct fc_els_cmd_s *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+ bfa_stats(lport, uf_recvs);
+
+ if (!bfa_fcs_port_is_online(lport)) {
+ bfa_stats(lport, uf_recv_drops);
+ return;
+ }
+
+ /**
+ * First, handle ELSs that donot require a login.
+ */
+ /*
+ * Handle PLOGI first
+ */
+ if ((fchs->type == FC_TYPE_ELS) &&
+ (els_cmd->els_code == FC_ELS_PLOGI)) {
+ bfa_fcs_port_plogi(lport, fchs, (struct fc_logi_s *) els_cmd);
+ return;
+ }
+
+ /*
+ * Handle ECHO separately.
+ */
+ if ((fchs->type == FC_TYPE_ELS) && (els_cmd->els_code == FC_ELS_ECHO)) {
+ bfa_fcs_port_echo(lport, fchs,
+ (struct fc_echo_s *) els_cmd, len);
+ return;
+ }
+
+ /*
+ * Handle RNID separately.
+ */
+ if ((fchs->type == FC_TYPE_ELS) && (els_cmd->els_code == FC_ELS_RNID)) {
+ bfa_fcs_port_rnid(lport, fchs,
+ (struct fc_rnid_cmd_s *) els_cmd, len);
+ return;
+ }
+
+ /**
+ * look for a matching remote port ID
+ */
+ rport = bfa_fcs_port_get_rport_by_pid(lport, pid);
+ if (rport) {
+ bfa_trc(rport->fcs, fchs->s_id);
+ bfa_trc(rport->fcs, fchs->d_id);
+ bfa_trc(rport->fcs, fchs->type);
+
+ bfa_fcs_rport_uf_recv(rport, fchs, len);
+ return;
+ }
+
+ /**
+ * Only handles ELS frames for now.
+ */
+ if (fchs->type != FC_TYPE_ELS) {
+ bfa_trc(lport->fcs, fchs->type);
+ bfa_assert(0);
+ return;
+ }
+
+ bfa_trc(lport->fcs, els_cmd->els_code);
+ if (els_cmd->els_code == FC_ELS_RSCN) {
+ bfa_fcs_port_scn_process_rscn(lport, fchs, len);
+ return;
+ }
+
+ if (els_cmd->els_code == FC_ELS_LOGO) {
+ /**
+ * @todo Handle LOGO frames received.
+ */
+ bfa_trc(lport->fcs, els_cmd->els_code);
+ return;
+ }
+
+ if (els_cmd->els_code == FC_ELS_PRLI) {
+ /**
+ * @todo Handle PRLI frames received.
+ */
+ bfa_trc(lport->fcs, els_cmd->els_code);
+ return;
+ }
+
+ /**
+ * Unhandled ELS frames. Send a LS_RJT.
+ */
+ bfa_fcs_port_send_ls_rjt(lport, fchs, FC_LS_RJT_RSN_CMD_NOT_SUPP,
+ FC_LS_RJT_EXP_NO_ADDL_INFO);
+
+}
+
+/**
+ * PID based Lookup for a R-Port in the Port R-Port Queue
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_port_get_rport_by_pid(struct bfa_fcs_port_s *port, u32 pid)
+{
+ struct bfa_fcs_rport_s *rport;
+ struct list_head *qe;
+
+ list_for_each(qe, &port->rport_q) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ if (rport->pid == pid)
+ return rport;
+ }
+
+ bfa_trc(port->fcs, pid);
+ return NULL;
+}
+
+/**
+ * PWWN based Lookup for a R-Port in the Port R-Port Queue
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_port_get_rport_by_pwwn(struct bfa_fcs_port_s *port, wwn_t pwwn)
+{
+ struct bfa_fcs_rport_s *rport;
+ struct list_head *qe;
+
+ list_for_each(qe, &port->rport_q) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ if (wwn_is_equal(rport->pwwn, pwwn))
+ return rport;
+ }
+
+ bfa_trc(port->fcs, pwwn);
+ return (NULL);
+}
+
+/**
+ * NWWN based Lookup for a R-Port in the Port R-Port Queue
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_port_get_rport_by_nwwn(struct bfa_fcs_port_s *port, wwn_t nwwn)
+{
+ struct bfa_fcs_rport_s *rport;
+ struct list_head *qe;
+
+ list_for_each(qe, &port->rport_q) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ if (wwn_is_equal(rport->nwwn, nwwn))
+ return rport;
+ }
+
+ bfa_trc(port->fcs, nwwn);
+ return (NULL);
+}
+
+/**
+ * Called by rport module when new rports are discovered.
+ */
+void
+bfa_fcs_port_add_rport(struct bfa_fcs_port_s *port,
+ struct bfa_fcs_rport_s *rport)
+{
+ list_add_tail(&rport->qe, &port->rport_q);
+ port->num_rports++;
+}
+
+/**
+ * Called by rport module to when rports are deleted.
+ */
+void
+bfa_fcs_port_del_rport(struct bfa_fcs_port_s *port,
+ struct bfa_fcs_rport_s *rport)
+{
+ bfa_assert(bfa_q_is_on_q(&port->rport_q, rport));
+ list_del(&rport->qe);
+ port->num_rports--;
+
+ bfa_sm_send_event(port, BFA_FCS_PORT_SM_DELRPORT);
+}
+
+/**
+ * Called by fabric for base port when fabric login is complete.
+ * Called by vport for virtual ports when FDISC is complete.
+ */
+void
+bfa_fcs_port_online(struct bfa_fcs_port_s *port)
+{
+ bfa_sm_send_event(port, BFA_FCS_PORT_SM_ONLINE);
+}
+
+/**
+ * Called by fabric for base port when fabric goes offline.
+ * Called by vport for virtual ports when virtual port becomes offline.
+ */
+void
+bfa_fcs_port_offline(struct bfa_fcs_port_s *port)
+{
+ bfa_sm_send_event(port, BFA_FCS_PORT_SM_OFFLINE);
+}
+
+/**
+ * Called by fabric to delete base lport and associated resources.
+ *
+ * Called by vport to delete lport and associated resources. Should call
+ * bfa_fcs_vport_delete_comp() for vports on completion.
+ */
+void
+bfa_fcs_port_delete(struct bfa_fcs_port_s *port)
+{
+ bfa_sm_send_event(port, BFA_FCS_PORT_SM_DELETE);
+}
+
+/**
+ * Called by fabric in private loop topology to process LIP event.
+ */
+void
+bfa_fcs_port_lip(struct bfa_fcs_port_s *port)
+{
+}
+
+/**
+ * Return TRUE if port is online, else return FALSE
+ */
+bfa_boolean_t
+bfa_fcs_port_is_online(struct bfa_fcs_port_s *port)
+{
+ return (bfa_sm_cmp_state(port, bfa_fcs_port_sm_online));
+}
+
+/**
+ * Logical port initialization of base or virtual port.
+ * Called by fabric for base port or by vport for virtual ports.
+ */
+void
+bfa_fcs_lport_init(struct bfa_fcs_port_s *lport, struct bfa_fcs_s *fcs,
+ u16 vf_id, struct bfa_port_cfg_s *port_cfg,
+ struct bfa_fcs_vport_s *vport)
+{
+ lport->fcs = fcs;
+ lport->fabric = bfa_fcs_vf_lookup(fcs, vf_id);
+ bfa_os_assign(lport->port_cfg, *port_cfg);
+ lport->vport = vport;
+ lport->lp_tag = (vport) ? bfa_lps_get_tag(vport->lps) :
+ bfa_lps_get_tag(lport->fabric->lps);
+
+ INIT_LIST_HEAD(&lport->rport_q);
+ lport->num_rports = 0;
+
+ lport->bfad_port =
+ bfa_fcb_port_new(fcs->bfad, lport, lport->port_cfg.roles,
+ lport->fabric->vf_drv,
+ vport ? vport->vport_drv : NULL);
+ bfa_fcs_port_aen_post(lport, BFA_LPORT_AEN_NEW);
+
+ bfa_sm_set_state(lport, bfa_fcs_port_sm_uninit);
+ bfa_sm_send_event(lport, BFA_FCS_PORT_SM_CREATE);
+}
+
+
+
+/**
+ * fcs_lport_api
+ */
+
+void
+bfa_fcs_port_get_attr(struct bfa_fcs_port_s *port,
+ struct bfa_port_attr_s *port_attr)
+{
+ if (bfa_sm_cmp_state(port, bfa_fcs_port_sm_online))
+ port_attr->pid = port->pid;
+ else
+ port_attr->pid = 0;
+
+ port_attr->port_cfg = port->port_cfg;
+
+ if (port->fabric) {
+ port_attr->port_type = bfa_fcs_fabric_port_type(port->fabric);
+ port_attr->loopback = bfa_fcs_fabric_is_loopback(port->fabric);
+ port_attr->fabric_name = bfa_fcs_port_get_fabric_name(port);
+ memcpy(port_attr->fabric_ip_addr,
+ bfa_fcs_port_get_fabric_ipaddr(port),
+ BFA_FCS_FABRIC_IPADDR_SZ);
+
+ if (port->vport != NULL)
+ port_attr->port_type = BFA_PPORT_TYPE_VPORT;
+
+ } else {
+ port_attr->port_type = BFA_PPORT_TYPE_UNKNOWN;
+ port_attr->state = BFA_PORT_UNINIT;
+ }
+
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_pport.c BFA FCS PPORT ( physical port)
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs_fabric.h>
+#include "fcs_trcmod.h"
+#include "fcs.h"
+#include "fcs_fabric.h"
+#include "fcs_port.h"
+
+BFA_TRC_FILE(FCS, PPORT);
+
+static void
+bfa_fcs_pport_event_handler(void *cbarg, bfa_pport_event_t event)
+{
+ struct bfa_fcs_s *fcs = cbarg;
+
+ bfa_trc(fcs, event);
+
+ switch (event) {
+ case BFA_PPORT_LINKUP:
+ bfa_fcs_fabric_link_up(&fcs->fabric);
+ break;
+
+ case BFA_PPORT_LINKDOWN:
+ bfa_fcs_fabric_link_down(&fcs->fabric);
+ break;
+
+ case BFA_PPORT_TRUNK_LINKDOWN:
+ bfa_assert(0);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+void
+bfa_fcs_pport_modinit(struct bfa_fcs_s *fcs)
+{
+ bfa_pport_event_register(fcs->bfa, bfa_fcs_pport_event_handler,
+ fcs);
+}
+
+void
+bfa_fcs_pport_modexit(struct bfa_fcs_s *fcs)
+{
+ bfa_fcs_modexit_comp(fcs);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_uf.c BFA FCS UF ( Unsolicited Frames)
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs_fabric.h>
+#include "fcs.h"
+#include "fcs_trcmod.h"
+#include "fcs_fabric.h"
+#include "fcs_uf.h"
+
+BFA_TRC_FILE(FCS, UF);
+
+/**
+ * BFA callback for unsolicited frame receive handler.
+ *
+ * @param[in] cbarg callback arg for receive handler
+ * @param[in] uf unsolicited frame descriptor
+ *
+ * @return None
+ */
+static void
+bfa_fcs_uf_recv(void *cbarg, struct bfa_uf_s *uf)
+{
+ struct bfa_fcs_s *fcs = (struct bfa_fcs_s *) cbarg;
+ struct fchs_s *fchs = bfa_uf_get_frmbuf(uf);
+ u16 len = bfa_uf_get_frmlen(uf);
+ struct fc_vft_s *vft;
+ struct bfa_fcs_fabric_s *fabric;
+
+ /**
+ * check for VFT header
+ */
+ if (fchs->routing == FC_RTG_EXT_HDR &&
+ fchs->cat_info == FC_CAT_VFT_HDR) {
+ bfa_stats(fcs, uf.tagged);
+ vft = bfa_uf_get_frmbuf(uf);
+ if (fcs->port_vfid == vft->vf_id)
+ fabric = &fcs->fabric;
+ else
+ fabric = bfa_fcs_vf_lookup(fcs, (u16) vft->vf_id);
+
+ /**
+ * drop frame if vfid is unknown
+ */
+ if (!fabric) {
+ bfa_assert(0);
+ bfa_stats(fcs, uf.vfid_unknown);
+ bfa_uf_free(uf);
+ return;
+ }
+
+ /**
+ * skip vft header
+ */
+ fchs = (struct fchs_s *) (vft + 1);
+ len -= sizeof(struct fc_vft_s);
+
+ bfa_trc(fcs, vft->vf_id);
+ } else {
+ bfa_stats(fcs, uf.untagged);
+ fabric = &fcs->fabric;
+ }
+
+ bfa_trc(fcs, ((u32 *) fchs)[0]);
+ bfa_trc(fcs, ((u32 *) fchs)[1]);
+ bfa_trc(fcs, ((u32 *) fchs)[2]);
+ bfa_trc(fcs, ((u32 *) fchs)[3]);
+ bfa_trc(fcs, ((u32 *) fchs)[4]);
+ bfa_trc(fcs, ((u32 *) fchs)[5]);
+ bfa_trc(fcs, len);
+
+ bfa_fcs_fabric_uf_recv(fabric, fchs, len);
+ bfa_uf_free(uf);
+}
+
+void
+bfa_fcs_uf_modinit(struct bfa_fcs_s *fcs)
+{
+ bfa_uf_recv_register(fcs->bfa, bfa_fcs_uf_recv, fcs);
+}
+
+void
+bfa_fcs_uf_modexit(struct bfa_fcs_s *fcs)
+{
+ bfa_fcs_modexit_comp(fcs);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfi/bfi_uf.h>
+#include <cs/bfa_debug.h>
+
+BFA_TRC_FILE(HAL, FCXP);
+BFA_MODULE(fcxp);
+
+/**
+ * forward declarations
+ */
+static void __bfa_fcxp_send_cbfn(void *cbarg, bfa_boolean_t complete);
+static void hal_fcxp_rx_plog(struct bfa_s *bfa, struct bfa_fcxp_s *fcxp,
+ struct bfi_fcxp_send_rsp_s *fcxp_rsp);
+static void hal_fcxp_tx_plog(struct bfa_s *bfa, u32 reqlen,
+ struct bfa_fcxp_s *fcxp, struct fchs_s *fchs);
+static void bfa_fcxp_qresume(void *cbarg);
+static void bfa_fcxp_queue(struct bfa_fcxp_s *fcxp,
+ struct bfi_fcxp_send_req_s *send_req);
+
+/**
+ * fcxp_pvt BFA FCXP private functions
+ */
+
+static void
+claim_fcxp_req_rsp_mem(struct bfa_fcxp_mod_s *mod, struct bfa_meminfo_s *mi)
+{
+ u8 *dm_kva = NULL;
+ u64 dm_pa;
+ u32 buf_pool_sz;
+
+ dm_kva = bfa_meminfo_dma_virt(mi);
+ dm_pa = bfa_meminfo_dma_phys(mi);
+
+ buf_pool_sz = mod->req_pld_sz * mod->num_fcxps;
+
+ /*
+ * Initialize the fcxp req payload list
+ */
+ mod->req_pld_list_kva = dm_kva;
+ mod->req_pld_list_pa = dm_pa;
+ dm_kva += buf_pool_sz;
+ dm_pa += buf_pool_sz;
+ bfa_os_memset(mod->req_pld_list_kva, 0, buf_pool_sz);
+
+ /*
+ * Initialize the fcxp rsp payload list
+ */
+ buf_pool_sz = mod->rsp_pld_sz * mod->num_fcxps;
+ mod->rsp_pld_list_kva = dm_kva;
+ mod->rsp_pld_list_pa = dm_pa;
+ dm_kva += buf_pool_sz;
+ dm_pa += buf_pool_sz;
+ bfa_os_memset(mod->rsp_pld_list_kva, 0, buf_pool_sz);
+
+ bfa_meminfo_dma_virt(mi) = dm_kva;
+ bfa_meminfo_dma_phys(mi) = dm_pa;
+}
+
+static void
+claim_fcxps_mem(struct bfa_fcxp_mod_s *mod, struct bfa_meminfo_s *mi)
+{
+ u16 i;
+ struct bfa_fcxp_s *fcxp;
+
+ fcxp = (struct bfa_fcxp_s *) bfa_meminfo_kva(mi);
+ bfa_os_memset(fcxp, 0, sizeof(struct bfa_fcxp_s) * mod->num_fcxps);
+
+ INIT_LIST_HEAD(&mod->fcxp_free_q);
+ INIT_LIST_HEAD(&mod->fcxp_active_q);
+
+ mod->fcxp_list = fcxp;
+
+ for (i = 0; i < mod->num_fcxps; i++) {
+ fcxp->fcxp_mod = mod;
+ fcxp->fcxp_tag = i;
+
+ list_add_tail(&fcxp->qe, &mod->fcxp_free_q);
+ bfa_reqq_winit(&fcxp->reqq_wqe, bfa_fcxp_qresume, fcxp);
+ fcxp->reqq_waiting = BFA_FALSE;
+
+ fcxp = fcxp + 1;
+ }
+
+ bfa_meminfo_kva(mi) = (void *)fcxp;
+}
+
+static void
+bfa_fcxp_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,
+ u32 *dm_len)
+{
+ u16 num_fcxp_reqs = cfg->fwcfg.num_fcxp_reqs;
+
+ if (num_fcxp_reqs == 0)
+ return;
+
+ /*
+ * Account for req/rsp payload
+ */
+ *dm_len += BFA_FCXP_MAX_IBUF_SZ * num_fcxp_reqs;
+ if (cfg->drvcfg.min_cfg)
+ *dm_len += BFA_FCXP_MAX_IBUF_SZ * num_fcxp_reqs;
+ else
+ *dm_len += BFA_FCXP_MAX_LBUF_SZ * num_fcxp_reqs;
+
+ /*
+ * Account for fcxp structs
+ */
+ *ndm_len += sizeof(struct bfa_fcxp_s) * num_fcxp_reqs;
+}
+
+static void
+bfa_fcxp_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+ struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+
+ bfa_os_memset(mod, 0, sizeof(struct bfa_fcxp_mod_s));
+ mod->bfa = bfa;
+ mod->num_fcxps = cfg->fwcfg.num_fcxp_reqs;
+
+ /**
+ * Initialize FCXP request and response payload sizes.
+ */
+ mod->req_pld_sz = mod->rsp_pld_sz = BFA_FCXP_MAX_IBUF_SZ;
+ if (!cfg->drvcfg.min_cfg)
+ mod->rsp_pld_sz = BFA_FCXP_MAX_LBUF_SZ;
+
+ INIT_LIST_HEAD(&mod->wait_q);
+
+ claim_fcxp_req_rsp_mem(mod, meminfo);
+ claim_fcxps_mem(mod, meminfo);
+}
+
+static void
+bfa_fcxp_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcxp_detach(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcxp_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcxp_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_fcxp_iocdisable(struct bfa_s *bfa)
+{
+ struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+ struct bfa_fcxp_s *fcxp;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &mod->fcxp_active_q) {
+ fcxp = (struct bfa_fcxp_s *) qe;
+ if (fcxp->caller == NULL) {
+ fcxp->send_cbfn(fcxp->caller, fcxp, fcxp->send_cbarg,
+ BFA_STATUS_IOC_FAILURE, 0, 0, NULL);
+ bfa_fcxp_free(fcxp);
+ } else {
+ fcxp->rsp_status = BFA_STATUS_IOC_FAILURE;
+ bfa_cb_queue(bfa, &fcxp->hcb_qe,
+ __bfa_fcxp_send_cbfn, fcxp);
+ }
+ }
+}
+
+static struct bfa_fcxp_s *
+bfa_fcxp_get(struct bfa_fcxp_mod_s *fm)
+{
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_q_deq(&fm->fcxp_free_q, &fcxp);
+
+ if (fcxp)
+ list_add_tail(&fcxp->qe, &fm->fcxp_active_q);
+
+ return (fcxp);
+}
+
+static void
+bfa_fcxp_put(struct bfa_fcxp_s *fcxp)
+{
+ struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+ struct bfa_fcxp_wqe_s *wqe;
+
+ bfa_q_deq(&mod->wait_q, &wqe);
+ if (wqe) {
+ bfa_trc(mod->bfa, fcxp->fcxp_tag);
+ wqe->alloc_cbfn(wqe->alloc_cbarg, fcxp);
+ return;
+ }
+
+ bfa_assert(bfa_q_is_on_q(&mod->fcxp_active_q, fcxp));
+ list_del(&fcxp->qe);
+ list_add_tail(&fcxp->qe, &mod->fcxp_free_q);
+}
+
+static void
+bfa_fcxp_null_comp(void *bfad_fcxp, struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t req_status, u32 rsp_len,
+ u32 resid_len, struct fchs_s *rsp_fchs)
+{
+ /**discarded fcxp completion */
+}
+
+static void
+__bfa_fcxp_send_cbfn(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_fcxp_s *fcxp = cbarg;
+
+ if (complete) {
+ fcxp->send_cbfn(fcxp->caller, fcxp, fcxp->send_cbarg,
+ fcxp->rsp_status, fcxp->rsp_len,
+ fcxp->residue_len, &fcxp->rsp_fchs);
+ } else {
+ bfa_fcxp_free(fcxp);
+ }
+}
+
+static void
+hal_fcxp_send_comp(struct bfa_s *bfa, struct bfi_fcxp_send_rsp_s *fcxp_rsp)
+{
+ struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+ struct bfa_fcxp_s *fcxp;
+ u16 fcxp_tag = bfa_os_ntohs(fcxp_rsp->fcxp_tag);
+
+ bfa_trc(bfa, fcxp_tag);
+
+ fcxp_rsp->rsp_len = bfa_os_ntohl(fcxp_rsp->rsp_len);
+
+ /**
+ * @todo f/w should not set residue to non-0 when everything
+ * is received.
+ */
+ if (fcxp_rsp->req_status == BFA_STATUS_OK)
+ fcxp_rsp->residue_len = 0;
+ else
+ fcxp_rsp->residue_len = bfa_os_ntohl(fcxp_rsp->residue_len);
+
+ fcxp = BFA_FCXP_FROM_TAG(mod, fcxp_tag);
+
+ bfa_assert(fcxp->send_cbfn != NULL);
+
+ hal_fcxp_rx_plog(mod->bfa, fcxp, fcxp_rsp);
+
+ if (fcxp->send_cbfn != NULL) {
+ if (fcxp->caller == NULL) {
+ bfa_trc(mod->bfa, fcxp->fcxp_tag);
+
+ fcxp->send_cbfn(fcxp->caller, fcxp, fcxp->send_cbarg,
+ fcxp_rsp->req_status, fcxp_rsp->rsp_len,
+ fcxp_rsp->residue_len, &fcxp_rsp->fchs);
+ /*
+ * fcxp automatically freed on return from the callback
+ */
+ bfa_fcxp_free(fcxp);
+ } else {
+ bfa_trc(mod->bfa, fcxp->fcxp_tag);
+ fcxp->rsp_status = fcxp_rsp->req_status;
+ fcxp->rsp_len = fcxp_rsp->rsp_len;
+ fcxp->residue_len = fcxp_rsp->residue_len;
+ fcxp->rsp_fchs = fcxp_rsp->fchs;
+
+ bfa_cb_queue(bfa, &fcxp->hcb_qe,
+ __bfa_fcxp_send_cbfn, fcxp);
+ }
+ } else {
+ bfa_trc(bfa, fcxp_tag);
+ }
+}
+
+static void
+hal_fcxp_set_local_sges(struct bfi_sge_s *sge, u32 reqlen, u64 req_pa)
+{
+ union bfi_addr_u sga_zero = { {0} };
+
+ sge->sg_len = reqlen;
+ sge->flags = BFI_SGE_DATA_LAST;
+ bfa_dma_addr_set(sge[0].sga, req_pa);
+ bfa_sge_to_be(sge);
+ sge++;
+
+ sge->sga = sga_zero;
+ sge->sg_len = reqlen;
+ sge->flags = BFI_SGE_PGDLEN;
+ bfa_sge_to_be(sge);
+}
+
+static void
+hal_fcxp_tx_plog(struct bfa_s *bfa, u32 reqlen, struct bfa_fcxp_s *fcxp,
+ struct fchs_s *fchs)
+{
+ /*
+ * TODO: TX ox_id
+ */
+ if (reqlen > 0) {
+ if (fcxp->use_ireqbuf) {
+ u32 pld_w0 =
+ *((u32 *) BFA_FCXP_REQ_PLD(fcxp));
+
+ bfa_plog_fchdr_and_pl(bfa->plog, BFA_PL_MID_HAL_FCXP,
+ BFA_PL_EID_TX,
+ reqlen + sizeof(struct fchs_s), fchs, pld_w0);
+ } else {
+ bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_FCXP,
+ BFA_PL_EID_TX, reqlen + sizeof(struct fchs_s),
+ fchs);
+ }
+ } else {
+ bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_FCXP, BFA_PL_EID_TX,
+ reqlen + sizeof(struct fchs_s), fchs);
+ }
+}
+
+static void
+hal_fcxp_rx_plog(struct bfa_s *bfa, struct bfa_fcxp_s *fcxp,
+ struct bfi_fcxp_send_rsp_s *fcxp_rsp)
+{
+ if (fcxp_rsp->rsp_len > 0) {
+ if (fcxp->use_irspbuf) {
+ u32 pld_w0 =
+ *((u32 *) BFA_FCXP_RSP_PLD(fcxp));
+
+ bfa_plog_fchdr_and_pl(bfa->plog, BFA_PL_MID_HAL_FCXP,
+ BFA_PL_EID_RX,
+ (u16) fcxp_rsp->rsp_len,
+ &fcxp_rsp->fchs, pld_w0);
+ } else {
+ bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_FCXP,
+ BFA_PL_EID_RX,
+ (u16) fcxp_rsp->rsp_len,
+ &fcxp_rsp->fchs);
+ }
+ } else {
+ bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_FCXP, BFA_PL_EID_RX,
+ (u16) fcxp_rsp->rsp_len, &fcxp_rsp->fchs);
+ }
+}
+
+/**
+ * Handler to resume sending fcxp when space in available in cpe queue.
+ */
+static void
+bfa_fcxp_qresume(void *cbarg)
+{
+ struct bfa_fcxp_s *fcxp = cbarg;
+ struct bfa_s *bfa = fcxp->fcxp_mod->bfa;
+ struct bfi_fcxp_send_req_s *send_req;
+
+ fcxp->reqq_waiting = BFA_FALSE;
+ send_req = bfa_reqq_next(bfa, BFA_REQQ_FCXP);
+ bfa_fcxp_queue(fcxp, send_req);
+}
+
+/**
+ * Queue fcxp send request to foimrware.
+ */
+static void
+bfa_fcxp_queue(struct bfa_fcxp_s *fcxp, struct bfi_fcxp_send_req_s *send_req)
+{
+ struct bfa_s *bfa = fcxp->fcxp_mod->bfa;
+ struct bfa_fcxp_req_info_s *reqi = &fcxp->req_info;
+ struct bfa_fcxp_rsp_info_s *rspi = &fcxp->rsp_info;
+ struct bfa_rport_s *rport = reqi->bfa_rport;
+
+ bfi_h2i_set(send_req->mh, BFI_MC_FCXP, BFI_FCXP_H2I_SEND_REQ,
+ bfa_lpuid(bfa));
+
+ send_req->fcxp_tag = bfa_os_htons(fcxp->fcxp_tag);
+ if (rport) {
+ send_req->rport_fw_hndl = rport->fw_handle;
+ send_req->max_frmsz = bfa_os_htons(rport->rport_info.max_frmsz);
+ if (send_req->max_frmsz == 0)
+ send_req->max_frmsz = bfa_os_htons(FC_MAX_PDUSZ);
+ } else {
+ send_req->rport_fw_hndl = 0;
+ send_req->max_frmsz = bfa_os_htons(FC_MAX_PDUSZ);
+ }
+
+ send_req->vf_id = bfa_os_htons(reqi->vf_id);
+ send_req->lp_tag = reqi->lp_tag;
+ send_req->class = reqi->class;
+ send_req->rsp_timeout = rspi->rsp_timeout;
+ send_req->cts = reqi->cts;
+ send_req->fchs = reqi->fchs;
+
+ send_req->req_len = bfa_os_htonl(reqi->req_tot_len);
+ send_req->rsp_maxlen = bfa_os_htonl(rspi->rsp_maxlen);
+
+ /*
+ * setup req sgles
+ */
+ if (fcxp->use_ireqbuf == 1) {
+ hal_fcxp_set_local_sges(send_req->req_sge, reqi->req_tot_len,
+ BFA_FCXP_REQ_PLD_PA(fcxp));
+ } else {
+ if (fcxp->nreq_sgles > 0) {
+ bfa_assert(fcxp->nreq_sgles == 1);
+ hal_fcxp_set_local_sges(send_req->req_sge,
+ reqi->req_tot_len,
+ fcxp->req_sga_cbfn(fcxp->caller,
+ 0));
+ } else {
+ bfa_assert(reqi->req_tot_len == 0);
+ hal_fcxp_set_local_sges(send_req->rsp_sge, 0, 0);
+ }
+ }
+
+ /*
+ * setup rsp sgles
+ */
+ if (fcxp->use_irspbuf == 1) {
+ bfa_assert(rspi->rsp_maxlen <= BFA_FCXP_MAX_LBUF_SZ);
+
+ hal_fcxp_set_local_sges(send_req->rsp_sge, rspi->rsp_maxlen,
+ BFA_FCXP_RSP_PLD_PA(fcxp));
+
+ } else {
+ if (fcxp->nrsp_sgles > 0) {
+ bfa_assert(fcxp->nrsp_sgles == 1);
+ hal_fcxp_set_local_sges(send_req->rsp_sge,
+ rspi->rsp_maxlen,
+ fcxp->rsp_sga_cbfn(fcxp->caller,
+ 0));
+ } else {
+ bfa_assert(rspi->rsp_maxlen == 0);
+ hal_fcxp_set_local_sges(send_req->rsp_sge, 0, 0);
+ }
+ }
+
+ hal_fcxp_tx_plog(bfa, reqi->req_tot_len, fcxp, &reqi->fchs);
+
+ bfa_reqq_produce(bfa, BFA_REQQ_FCXP);
+
+ bfa_trc(bfa, bfa_reqq_pi(bfa, BFA_REQQ_FCXP));
+ bfa_trc(bfa, bfa_reqq_ci(bfa, BFA_REQQ_FCXP));
+}
+
+
+/**
+ * hal_fcxp_api BFA FCXP API
+ */
+
+/**
+ * Allocate an FCXP instance to send a response or to send a request
+ * that has a response. Request/response buffers are allocated by caller.
+ *
+ * @param[in] bfa BFA bfa instance
+ * @param[in] nreq_sgles Number of SG elements required for request
+ * buffer. 0, if fcxp internal buffers are used.
+ * Use bfa_fcxp_get_reqbuf() to get the
+ * internal req buffer.
+ * @param[in] req_sgles SG elements describing request buffer. Will be
+ * copied in by BFA and hence can be freed on
+ * return from this function.
+ * @param[in] get_req_sga function ptr to be called to get a request SG
+ * Address (given the sge index).
+ * @param[in] get_req_sglen function ptr to be called to get a request SG
+ * len (given the sge index).
+ * @param[in] get_rsp_sga function ptr to be called to get a response SG
+ * Address (given the sge index).
+ * @param[in] get_rsp_sglen function ptr to be called to get a response SG
+ * len (given the sge index).
+ *
+ * @return FCXP instance. NULL on failure.
+ */
+struct bfa_fcxp_s *
+bfa_fcxp_alloc(void *caller, struct bfa_s *bfa, int nreq_sgles,
+ int nrsp_sgles, bfa_fcxp_get_sgaddr_t req_sga_cbfn,
+ bfa_fcxp_get_sglen_t req_sglen_cbfn,
+ bfa_fcxp_get_sgaddr_t rsp_sga_cbfn,
+ bfa_fcxp_get_sglen_t rsp_sglen_cbfn)
+{
+ struct bfa_fcxp_s *fcxp = NULL;
+ u32 nreq_sgpg, nrsp_sgpg;
+
+ bfa_assert(bfa != NULL);
+
+ fcxp = bfa_fcxp_get(BFA_FCXP_MOD(bfa));
+ if (fcxp == NULL)
+ return (NULL);
+
+ bfa_trc(bfa, fcxp->fcxp_tag);
+
+ fcxp->caller = caller;
+
+ if (nreq_sgles == 0) {
+ fcxp->use_ireqbuf = 1;
+ } else {
+ bfa_assert(req_sga_cbfn != NULL);
+ bfa_assert(req_sglen_cbfn != NULL);
+
+ fcxp->use_ireqbuf = 0;
+ fcxp->req_sga_cbfn = req_sga_cbfn;
+ fcxp->req_sglen_cbfn = req_sglen_cbfn;
+
+ fcxp->nreq_sgles = nreq_sgles;
+
+ /*
+ * alloc required sgpgs
+ */
+ if (nreq_sgles > BFI_SGE_INLINE) {
+ nreq_sgpg = BFA_SGPG_NPAGE(nreq_sgles);
+
+ if (bfa_sgpg_malloc
+ (bfa, &fcxp->req_sgpg_q, nreq_sgpg)
+ != BFA_STATUS_OK) {
+ /* bfa_sgpg_wait(bfa, &fcxp->req_sgpg_wqe,
+ nreq_sgpg); */
+ /*
+ * TODO
+ */
+ }
+ }
+ }
+
+ if (nrsp_sgles == 0) {
+ fcxp->use_irspbuf = 1;
+ } else {
+ bfa_assert(rsp_sga_cbfn != NULL);
+ bfa_assert(rsp_sglen_cbfn != NULL);
+
+ fcxp->use_irspbuf = 0;
+ fcxp->rsp_sga_cbfn = rsp_sga_cbfn;
+ fcxp->rsp_sglen_cbfn = rsp_sglen_cbfn;
+
+ fcxp->nrsp_sgles = nrsp_sgles;
+ /*
+ * alloc required sgpgs
+ */
+ if (nrsp_sgles > BFI_SGE_INLINE) {
+ nrsp_sgpg = BFA_SGPG_NPAGE(nreq_sgles);
+
+ if (bfa_sgpg_malloc
+ (bfa, &fcxp->rsp_sgpg_q, nrsp_sgpg)
+ != BFA_STATUS_OK) {
+ /* bfa_sgpg_wait(bfa, &fcxp->rsp_sgpg_wqe,
+ nrsp_sgpg); */
+ /*
+ * TODO
+ */
+ }
+ }
+ }
+
+ return (fcxp);
+}
+
+/**
+ * Get the internal request buffer pointer
+ *
+ * @param[in] fcxp BFA fcxp pointer
+ *
+ * @return pointer to the internal request buffer
+ */
+void *
+bfa_fcxp_get_reqbuf(struct bfa_fcxp_s *fcxp)
+{
+ struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+ void *reqbuf;
+
+ bfa_assert(fcxp->use_ireqbuf == 1);
+ reqbuf = ((u8 *)mod->req_pld_list_kva) +
+ fcxp->fcxp_tag * mod->req_pld_sz;
+ return reqbuf;
+}
+
+u32
+bfa_fcxp_get_reqbufsz(struct bfa_fcxp_s *fcxp)
+{
+ struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+
+ return mod->req_pld_sz;
+}
+
+/**
+ * Get the internal response buffer pointer
+ *
+ * @param[in] fcxp BFA fcxp pointer
+ *
+ * @return pointer to the internal request buffer
+ */
+void *
+bfa_fcxp_get_rspbuf(struct bfa_fcxp_s *fcxp)
+{
+ struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+ void *rspbuf;
+
+ bfa_assert(fcxp->use_irspbuf == 1);
+
+ rspbuf = ((u8 *)mod->rsp_pld_list_kva) +
+ fcxp->fcxp_tag * mod->rsp_pld_sz;
+ return rspbuf;
+}
+
+/**
+ * Free the BFA FCXP
+ *
+ * @param[in] fcxp BFA fcxp pointer
+ *
+ * @return void
+ */
+void
+bfa_fcxp_free(struct bfa_fcxp_s *fcxp)
+{
+ struct bfa_fcxp_mod_s *mod = fcxp->fcxp_mod;
+
+ bfa_assert(fcxp != NULL);
+ bfa_trc(mod->bfa, fcxp->fcxp_tag);
+ bfa_fcxp_put(fcxp);
+}
+
+/**
+ * Send a FCXP request
+ *
+ * @param[in] fcxp BFA fcxp pointer
+ * @param[in] rport BFA rport pointer. Could be left NULL for WKA rports
+ * @param[in] vf_id virtual Fabric ID
+ * @param[in] lp_tag lport tag
+ * @param[in] cts use Continous sequence
+ * @param[in] cos fc Class of Service
+ * @param[in] reqlen request length, does not include FCHS length
+ * @param[in] fchs fc Header Pointer. The header content will be copied
+ * in by BFA.
+ *
+ * @param[in] cbfn call back function to be called on receiving
+ * the response
+ * @param[in] cbarg arg for cbfn
+ * @param[in] rsp_timeout
+ * response timeout
+ *
+ * @return bfa_status_t
+ */
+void
+bfa_fcxp_send(struct bfa_fcxp_s *fcxp, struct bfa_rport_s *rport,
+ u16 vf_id, u8 lp_tag, bfa_boolean_t cts, enum fc_cos cos,
+ u32 reqlen, struct fchs_s *fchs, bfa_cb_fcxp_send_t cbfn,
+ void *cbarg, u32 rsp_maxlen, u8 rsp_timeout)
+{
+ struct bfa_s *bfa = fcxp->fcxp_mod->bfa;
+ struct bfa_fcxp_req_info_s *reqi = &fcxp->req_info;
+ struct bfa_fcxp_rsp_info_s *rspi = &fcxp->rsp_info;
+ struct bfi_fcxp_send_req_s *send_req;
+
+ bfa_trc(bfa, fcxp->fcxp_tag);
+
+ /**
+ * setup request/response info
+ */
+ reqi->bfa_rport = rport;
+ reqi->vf_id = vf_id;
+ reqi->lp_tag = lp_tag;
+ reqi->class = cos;
+ rspi->rsp_timeout = rsp_timeout;
+ reqi->cts = cts;
+ reqi->fchs = *fchs;
+ reqi->req_tot_len = reqlen;
+ rspi->rsp_maxlen = rsp_maxlen;
+ fcxp->send_cbfn = cbfn ? cbfn : bfa_fcxp_null_comp;
+ fcxp->send_cbarg = cbarg;
+
+ /**
+ * If no room in CPE queue, wait for
+ */
+ send_req = bfa_reqq_next(bfa, BFA_REQQ_FCXP);
+ if (!send_req) {
+ bfa_trc(bfa, fcxp->fcxp_tag);
+ fcxp->reqq_waiting = BFA_TRUE;
+ bfa_reqq_wait(bfa, BFA_REQQ_FCXP, &fcxp->reqq_wqe);
+ return;
+ }
+
+ bfa_fcxp_queue(fcxp, send_req);
+}
+
+/**
+ * Abort a BFA FCXP
+ *
+ * @param[in] fcxp BFA fcxp pointer
+ *
+ * @return void
+ */
+bfa_status_t
+bfa_fcxp_abort(struct bfa_fcxp_s *fcxp)
+{
+ bfa_assert(0);
+ return (BFA_STATUS_OK);
+}
+
+void
+bfa_fcxp_alloc_wait(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe,
+ bfa_fcxp_alloc_cbfn_t alloc_cbfn, void *alloc_cbarg)
+{
+ struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+
+ bfa_assert(list_empty(&mod->fcxp_free_q));
+
+ wqe->alloc_cbfn = alloc_cbfn;
+ wqe->alloc_cbarg = alloc_cbarg;
+ list_add_tail(&wqe->qe, &mod->wait_q);
+}
+
+void
+bfa_fcxp_walloc_cancel(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe)
+{
+ struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+
+ bfa_assert(bfa_q_is_on_q(&mod->wait_q, wqe));
+ list_del(&wqe->qe);
+}
+
+void
+bfa_fcxp_discard(struct bfa_fcxp_s *fcxp)
+{
+ /**
+ * If waiting for room in request queue, cancel reqq wait
+ * and free fcxp.
+ */
+ if (fcxp->reqq_waiting) {
+ fcxp->reqq_waiting = BFA_FALSE;
+ bfa_reqq_wcancel(&fcxp->reqq_wqe);
+ bfa_fcxp_free(fcxp);
+ return;
+ }
+
+ fcxp->send_cbfn = bfa_fcxp_null_comp;
+}
+
+
+
+/**
+ * hal_fcxp_public BFA FCXP public functions
+ */
+
+void
+bfa_fcxp_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
+{
+ switch (msg->mhdr.msg_id) {
+ case BFI_FCXP_I2H_SEND_RSP:
+ hal_fcxp_send_comp(bfa, (struct bfi_fcxp_send_rsp_s *) msg);
+ break;
+
+ default:
+ bfa_trc(bfa, msg->mhdr.msg_id);
+ bfa_assert(0);
+ }
+}
+
+u32
+bfa_fcxp_get_maxrsp(struct bfa_s *bfa)
+{
+ struct bfa_fcxp_mod_s *mod = BFA_FCXP_MOD(bfa);
+
+ return mod->rsp_pld_sz;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCXP_PRIV_H__
+#define __BFA_FCXP_PRIV_H__
+
+#include <cs/bfa_sm.h>
+#include <protocol/fc.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_fcxp.h>
+
+#define BFA_FCXP_MIN (1)
+#define BFA_FCXP_MAX_IBUF_SZ (2 * 1024 + 256)
+#define BFA_FCXP_MAX_LBUF_SZ (4 * 1024 + 256)
+
+struct bfa_fcxp_mod_s {
+ struct bfa_s *bfa; /* backpointer to BFA */
+ struct bfa_fcxp_s *fcxp_list; /* array of FCXPs */
+ u16 num_fcxps; /* max num FCXP requests */
+ struct list_head fcxp_free_q; /* free FCXPs */
+ struct list_head fcxp_active_q; /* active FCXPs */
+ void *req_pld_list_kva; /* list of FCXP req pld */
+ u64 req_pld_list_pa; /* list of FCXP req pld */
+ void *rsp_pld_list_kva; /* list of FCXP resp pld */
+ u64 rsp_pld_list_pa; /* list of FCXP resp pld */
+ struct list_head wait_q; /* wait queue for free fcxp */
+ u32 req_pld_sz;
+ u32 rsp_pld_sz;
+};
+
+#define BFA_FCXP_MOD(__bfa) (&(__bfa)->modules.fcxp_mod)
+#define BFA_FCXP_FROM_TAG(__mod, __tag) (&(__mod)->fcxp_list[__tag])
+
+typedef void (*fcxp_send_cb_t) (struct bfa_s *ioc, struct bfa_fcxp_s *fcxp,
+ void *cb_arg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs);
+
+/**
+ * Information needed for a FCXP request
+ */
+struct bfa_fcxp_req_info_s {
+ struct bfa_rport_s *bfa_rport; /* Pointer to the bfa rport that was
+ *returned from bfa_rport_create().
+ *This could be left NULL for WKA or for
+ *FCXP interactions before the rport
+ *nexus is established
+ */
+ struct fchs_s fchs; /* request FC header structure */
+ u8 cts; /* continous sequence */
+ u8 class; /* FC class for the request/response */
+ u16 max_frmsz; /* max send frame size */
+ u16 vf_id; /* vsan tag if applicable */
+ u8 lp_tag; /* lport tag */
+ u32 req_tot_len; /* request payload total length */
+};
+
+struct bfa_fcxp_rsp_info_s {
+ struct fchs_s rsp_fchs; /* Response frame's FC header will
+ * be *sent back in this field */
+ u8 rsp_timeout; /* timeout in seconds, 0-no response
+ */
+ u8 rsvd2[3];
+ u32 rsp_maxlen; /* max response length expected */
+};
+
+struct bfa_fcxp_s {
+ struct list_head qe; /* fcxp queue element */
+ bfa_sm_t sm; /* state machine */
+ void *caller; /* driver or fcs */
+ struct bfa_fcxp_mod_s *fcxp_mod;
+ /* back pointer to fcxp mod */
+ u16 fcxp_tag; /* internal tag */
+ struct bfa_fcxp_req_info_s req_info;
+ /* request info */
+ struct bfa_fcxp_rsp_info_s rsp_info;
+ /* response info */
+ u8 use_ireqbuf; /* use internal req buf */
+ u8 use_irspbuf; /* use internal rsp buf */
+ u32 nreq_sgles; /* num request SGLEs */
+ u32 nrsp_sgles; /* num response SGLEs */
+ struct list_head req_sgpg_q; /* SG pages for request buf */
+ struct list_head req_sgpg_wqe; /* wait queue for req SG page */
+ struct list_head rsp_sgpg_q; /* SG pages for response buf */
+ struct list_head rsp_sgpg_wqe; /* wait queue for rsp SG page */
+
+ bfa_fcxp_get_sgaddr_t req_sga_cbfn;
+ /* SG elem addr user function */
+ bfa_fcxp_get_sglen_t req_sglen_cbfn;
+ /* SG elem len user function */
+ bfa_fcxp_get_sgaddr_t rsp_sga_cbfn;
+ /* SG elem addr user function */
+ bfa_fcxp_get_sglen_t rsp_sglen_cbfn;
+ /* SG elem len user function */
+ bfa_cb_fcxp_send_t send_cbfn; /* send completion callback */
+ void *send_cbarg; /* callback arg */
+ struct bfa_sge_s req_sge[BFA_FCXP_MAX_SGES];
+ /* req SG elems */
+ struct bfa_sge_s rsp_sge[BFA_FCXP_MAX_SGES];
+ /* rsp SG elems */
+ u8 rsp_status; /* comp: rsp status */
+ u32 rsp_len; /* comp: actual response len */
+ u32 residue_len; /* comp: residual rsp length */
+ struct fchs_s rsp_fchs; /* comp: response fchs */
+ struct bfa_cb_qe_s hcb_qe; /* comp: callback qelem */
+ struct bfa_reqq_wait_s reqq_wqe;
+ bfa_boolean_t reqq_waiting;
+};
+
+#define BFA_FCXP_REQ_PLD(_fcxp) (bfa_fcxp_get_reqbuf(_fcxp))
+
+#define BFA_FCXP_RSP_FCHS(_fcxp) (&((_fcxp)->rsp_info.fchs))
+#define BFA_FCXP_RSP_PLD(_fcxp) (bfa_fcxp_get_rspbuf(_fcxp))
+
+#define BFA_FCXP_REQ_PLD_PA(_fcxp) \
+ ((_fcxp)->fcxp_mod->req_pld_list_pa + \
+ ((_fcxp)->fcxp_mod->req_pld_sz * (_fcxp)->fcxp_tag))
+
+#define BFA_FCXP_RSP_PLD_PA(_fcxp) \
+ ((_fcxp)->fcxp_mod->rsp_pld_list_pa + \
+ ((_fcxp)->fcxp_mod->rsp_pld_sz * (_fcxp)->fcxp_tag))
+
+void bfa_fcxp_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+#endif /* __BFA_FCXP_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FWIMG_PRIV_H__
+#define __BFA_FWIMG_PRIV_H__
+
+#define BFI_FLASH_CHUNK_SZ 256 /* Flash chunk size */
+#define BFI_FLASH_CHUNK_SZ_WORDS (BFI_FLASH_CHUNK_SZ/sizeof(u32))
+
+extern u32 *bfi_image_ct_get_chunk(u32 off);
+extern u32 bfi_image_ct_size;
+extern u32 *bfi_image_cb_get_chunk(u32 off);
+extern u32 bfi_image_cb_size;
+extern u32 *bfi_image_cb;
+extern u32 *bfi_image_ct;
+
+#endif /* __BFA_FWIMG_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa_priv.h>
+#include <bfi/bfi_cbreg.h>
+
+void
+bfa_hwcb_reginit(struct bfa_s *bfa)
+{
+ struct bfa_iocfc_regs_s *bfa_regs = &bfa->iocfc.bfa_regs;
+ bfa_os_addr_t kva = bfa_ioc_bar0(&bfa->ioc);
+ int i, q, fn = bfa_ioc_pcifn(&bfa->ioc);
+
+ if (fn == 0) {
+ bfa_regs->intr_status = (kva + HOSTFN0_INT_STATUS);
+ bfa_regs->intr_mask = (kva + HOSTFN0_INT_MSK);
+ } else {
+ bfa_regs->intr_status = (kva + HOSTFN1_INT_STATUS);
+ bfa_regs->intr_mask = (kva + HOSTFN1_INT_MSK);
+ }
+
+ for (i = 0; i < BFI_IOC_MAX_CQS; i++) {
+ /*
+ * CPE registers
+ */
+ q = CPE_Q_NUM(fn, i);
+ bfa_regs->cpe_q_pi[i] = (kva + CPE_Q_PI(q));
+ bfa_regs->cpe_q_ci[i] = (kva + CPE_Q_CI(q));
+ bfa_regs->cpe_q_depth[i] = (kva + CPE_Q_DEPTH(q));
+
+ /*
+ * RME registers
+ */
+ q = CPE_Q_NUM(fn, i);
+ bfa_regs->rme_q_pi[i] = (kva + RME_Q_PI(q));
+ bfa_regs->rme_q_ci[i] = (kva + RME_Q_CI(q));
+ bfa_regs->rme_q_depth[i] = (kva + RME_Q_DEPTH(q));
+ }
+}
+
+void
+bfa_hwcb_rspq_ack(struct bfa_s *bfa, int rspq)
+{
+}
+
+static void
+bfa_hwcb_rspq_ack_msix(struct bfa_s *bfa, int rspq)
+{
+ bfa_reg_write(bfa->iocfc.bfa_regs.intr_status,
+ __HFN_INT_RME_Q0 << RME_Q_NUM(bfa_ioc_pcifn(&bfa->ioc), rspq));
+}
+
+void
+bfa_hwcb_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
+ u32 *num_vecs, u32 *max_vec_bit)
+{
+#define __HFN_NUMINTS 13
+ if (bfa_ioc_pcifn(&bfa->ioc) == 0) {
+ *msix_vecs_bmap = (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 |
+ __HFN_INT_CPE_Q2 | __HFN_INT_CPE_Q3 |
+ __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 |
+ __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 |
+ __HFN_INT_MBOX_LPU0);
+ *max_vec_bit = __HFN_INT_MBOX_LPU0;
+ } else {
+ *msix_vecs_bmap = (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 |
+ __HFN_INT_CPE_Q6 | __HFN_INT_CPE_Q7 |
+ __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 |
+ __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 |
+ __HFN_INT_MBOX_LPU1);
+ *max_vec_bit = __HFN_INT_MBOX_LPU1;
+ }
+
+ *msix_vecs_bmap |= (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 |
+ __HFN_INT_ERR_LPU1 | __HFN_INT_ERR_PSS);
+ *num_vecs = __HFN_NUMINTS;
+}
+
+/**
+ * No special setup required for crossbow -- vector assignments are implicit.
+ */
+void
+bfa_hwcb_msix_init(struct bfa_s *bfa, int nvecs)
+{
+ int i;
+
+ bfa_assert((nvecs == 1) || (nvecs == __HFN_NUMINTS));
+
+ bfa->msix.nvecs = nvecs;
+ if (nvecs == 1) {
+ for (i = 0; i < BFA_MSIX_CB_MAX; i++)
+ bfa->msix.handler[i] = bfa_msix_all;
+ return;
+ }
+
+ for (i = BFA_MSIX_CPE_Q0; i <= BFA_MSIX_CPE_Q7; i++)
+ bfa->msix.handler[i] = bfa_msix_reqq;
+
+ for (i = BFA_MSIX_RME_Q0; i <= BFA_MSIX_RME_Q7; i++)
+ bfa->msix.handler[i] = bfa_msix_rspq;
+
+ for (; i < BFA_MSIX_CB_MAX; i++)
+ bfa->msix.handler[i] = bfa_msix_lpu_err;
+}
+
+/**
+ * Crossbow -- dummy, interrupts are masked
+ */
+void
+bfa_hwcb_msix_install(struct bfa_s *bfa)
+{
+}
+
+void
+bfa_hwcb_msix_uninstall(struct bfa_s *bfa)
+{
+}
+
+/**
+ * No special enable/disable -- vector assignments are implicit.
+ */
+void
+bfa_hwcb_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix)
+{
+ bfa->iocfc.hwif.hw_rspq_ack = bfa_hwcb_rspq_ack_msix;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa_priv.h>
+#include <bfi/bfi_ctreg.h>
+#include <bfa_ioc.h>
+
+BFA_TRC_FILE(HAL, IOCFC_CT);
+
+static u32 __ct_msix_err_vec_reg[] = {
+ HOST_MSIX_ERR_INDEX_FN0,
+ HOST_MSIX_ERR_INDEX_FN1,
+ HOST_MSIX_ERR_INDEX_FN2,
+ HOST_MSIX_ERR_INDEX_FN3,
+};
+
+static void
+bfa_hwct_msix_lpu_err_set(struct bfa_s *bfa, bfa_boolean_t msix, int vec)
+{
+ int fn = bfa_ioc_pcifn(&bfa->ioc);
+ bfa_os_addr_t kva = bfa_ioc_bar0(&bfa->ioc);
+
+ if (msix)
+ bfa_reg_write(kva + __ct_msix_err_vec_reg[fn], vec);
+ else
+ bfa_reg_write(kva + __ct_msix_err_vec_reg[fn], 0);
+}
+
+/**
+ * Dummy interrupt handler for handling spurious interrupt during chip-reinit.
+ */
+static void
+bfa_hwct_msix_dummy(struct bfa_s *bfa, int vec)
+{
+}
+
+void
+bfa_hwct_reginit(struct bfa_s *bfa)
+{
+ struct bfa_iocfc_regs_s *bfa_regs = &bfa->iocfc.bfa_regs;
+ bfa_os_addr_t kva = bfa_ioc_bar0(&bfa->ioc);
+ int i, q, fn = bfa_ioc_pcifn(&bfa->ioc);
+
+ if (fn == 0) {
+ bfa_regs->intr_status = (kva + HOSTFN0_INT_STATUS);
+ bfa_regs->intr_mask = (kva + HOSTFN0_INT_MSK);
+ } else {
+ bfa_regs->intr_status = (kva + HOSTFN1_INT_STATUS);
+ bfa_regs->intr_mask = (kva + HOSTFN1_INT_MSK);
+ }
+
+ for (i = 0; i < BFI_IOC_MAX_CQS; i++) {
+ /*
+ * CPE registers
+ */
+ q = CPE_Q_NUM(fn, i);
+ bfa_regs->cpe_q_pi[i] = (kva + CPE_PI_PTR_Q(q << 5));
+ bfa_regs->cpe_q_ci[i] = (kva + CPE_CI_PTR_Q(q << 5));
+ bfa_regs->cpe_q_depth[i] = (kva + CPE_DEPTH_Q(q << 5));
+ bfa_regs->cpe_q_ctrl[i] = (kva + CPE_QCTRL_Q(q << 5));
+
+ /*
+ * RME registers
+ */
+ q = CPE_Q_NUM(fn, i);
+ bfa_regs->rme_q_pi[i] = (kva + RME_PI_PTR_Q(q << 5));
+ bfa_regs->rme_q_ci[i] = (kva + RME_CI_PTR_Q(q << 5));
+ bfa_regs->rme_q_depth[i] = (kva + RME_DEPTH_Q(q << 5));
+ bfa_regs->rme_q_ctrl[i] = (kva + RME_QCTRL_Q(q << 5));
+ }
+}
+
+void
+bfa_hwct_rspq_ack(struct bfa_s *bfa, int rspq)
+{
+ u32 r32;
+
+ r32 = bfa_reg_read(bfa->iocfc.bfa_regs.rme_q_ctrl[rspq]);
+ bfa_reg_write(bfa->iocfc.bfa_regs.rme_q_ctrl[rspq], r32);
+}
+
+void
+bfa_hwct_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
+ u32 *num_vecs, u32 *max_vec_bit)
+{
+ *msix_vecs_bmap = (1 << BFA_MSIX_CT_MAX) - 1;
+ *max_vec_bit = (1 << (BFA_MSIX_CT_MAX - 1));
+ *num_vecs = BFA_MSIX_CT_MAX;
+}
+
+/**
+ * Setup MSI-X vector for catapult
+ */
+void
+bfa_hwct_msix_init(struct bfa_s *bfa, int nvecs)
+{
+ bfa_assert((nvecs == 1) || (nvecs == BFA_MSIX_CT_MAX));
+ bfa_trc(bfa, nvecs);
+
+ bfa->msix.nvecs = nvecs;
+ bfa_hwct_msix_uninstall(bfa);
+}
+
+void
+bfa_hwct_msix_install(struct bfa_s *bfa)
+{
+ int i;
+
+ if (bfa->msix.nvecs == 0)
+ return;
+
+ if (bfa->msix.nvecs == 1) {
+ for (i = 0; i < BFA_MSIX_CT_MAX; i++)
+ bfa->msix.handler[i] = bfa_msix_all;
+ return;
+ }
+
+ for (i = BFA_MSIX_CPE_Q0; i <= BFA_MSIX_CPE_Q3; i++)
+ bfa->msix.handler[i] = bfa_msix_reqq;
+
+ for (; i <= BFA_MSIX_RME_Q3; i++)
+ bfa->msix.handler[i] = bfa_msix_rspq;
+
+ bfa_assert(i == BFA_MSIX_LPU_ERR);
+ bfa->msix.handler[BFA_MSIX_LPU_ERR] = bfa_msix_lpu_err;
+}
+
+void
+bfa_hwct_msix_uninstall(struct bfa_s *bfa)
+{
+ int i;
+
+ for (i = 0; i < BFA_MSIX_CT_MAX; i++)
+ bfa->msix.handler[i] = bfa_hwct_msix_dummy;
+}
+
+/**
+ * Enable MSI-X vectors
+ */
+void
+bfa_hwct_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix)
+{
+ bfa_trc(bfa, 0);
+ bfa_hwct_msix_lpu_err_set(bfa, msix, BFA_MSIX_LPU_ERR);
+ bfa_ioc_isr_mode_set(&bfa->ioc, msix);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <bfa.h>
+#include <bfi/bfi_cbreg.h>
+#include <bfa_port_priv.h>
+#include <bfa_intr_priv.h>
+#include <cs/bfa_debug.h>
+
+BFA_TRC_FILE(HAL, INTR);
+
+static void
+bfa_msix_errint(struct bfa_s *bfa, u32 intr)
+{
+ bfa_ioc_error_isr(&bfa->ioc);
+}
+
+static void
+bfa_msix_lpu(struct bfa_s *bfa)
+{
+ bfa_ioc_mbox_isr(&bfa->ioc);
+}
+
+void
+bfa_msix_all(struct bfa_s *bfa, int vec)
+{
+ bfa_intx(bfa);
+}
+
+/**
+ * hal_intr_api
+ */
+bfa_boolean_t
+bfa_intx(struct bfa_s *bfa)
+{
+ u32 intr, qintr;
+ int queue;
+
+ intr = bfa_reg_read(bfa->iocfc.bfa_regs.intr_status);
+ if (!intr)
+ return BFA_FALSE;
+
+ /**
+ * RME completion queue interrupt
+ */
+ qintr = intr & __HFN_INT_RME_MASK;
+ bfa_reg_write(bfa->iocfc.bfa_regs.intr_status, qintr);
+
+ for (queue = 0; queue < BFI_IOC_MAX_CQS_ASIC; queue ++) {
+ if (intr & (__HFN_INT_RME_Q0 << queue))
+ bfa_msix_rspq(bfa, queue & (BFI_IOC_MAX_CQS - 1));
+ }
+ intr &= ~qintr;
+ if (!intr)
+ return BFA_TRUE;
+
+ /**
+ * CPE completion queue interrupt
+ */
+ qintr = intr & __HFN_INT_CPE_MASK;
+ bfa_reg_write(bfa->iocfc.bfa_regs.intr_status, qintr);
+
+ for (queue = 0; queue < BFI_IOC_MAX_CQS_ASIC; queue++) {
+ if (intr & (__HFN_INT_CPE_Q0 << queue))
+ bfa_msix_reqq(bfa, queue & (BFI_IOC_MAX_CQS - 1));
+ }
+ intr &= ~qintr;
+ if (!intr)
+ return BFA_TRUE;
+
+ bfa_msix_lpu_err(bfa, intr);
+
+ return BFA_TRUE;
+}
+
+void
+bfa_isr_enable(struct bfa_s *bfa)
+{
+ u32 intr_unmask;
+ int pci_func = bfa_ioc_pcifn(&bfa->ioc);
+
+ bfa_trc(bfa, pci_func);
+
+ bfa_msix_install(bfa);
+ intr_unmask = (__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 |
+ __HFN_INT_ERR_LPU1 | __HFN_INT_ERR_PSS);
+
+ if (pci_func == 0)
+ intr_unmask |= (__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 |
+ __HFN_INT_CPE_Q2 | __HFN_INT_CPE_Q3 |
+ __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 |
+ __HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 |
+ __HFN_INT_MBOX_LPU0);
+ else
+ intr_unmask |= (__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 |
+ __HFN_INT_CPE_Q6 | __HFN_INT_CPE_Q7 |
+ __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 |
+ __HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 |
+ __HFN_INT_MBOX_LPU1);
+
+ bfa_reg_write(bfa->iocfc.bfa_regs.intr_status, intr_unmask);
+ bfa_reg_write(bfa->iocfc.bfa_regs.intr_mask, ~intr_unmask);
+ bfa_isr_mode_set(bfa, bfa->msix.nvecs != 0);
+}
+
+void
+bfa_isr_disable(struct bfa_s *bfa)
+{
+ bfa_isr_mode_set(bfa, BFA_FALSE);
+ bfa_reg_write(bfa->iocfc.bfa_regs.intr_mask, -1L);
+ bfa_msix_uninstall(bfa);
+}
+
+void
+bfa_msix_reqq(struct bfa_s *bfa, int qid)
+{
+ struct list_head *waitq, *qe, *qen;
+ struct bfa_reqq_wait_s *wqe;
+
+ qid &= (BFI_IOC_MAX_CQS - 1);
+
+ waitq = bfa_reqq(bfa, qid);
+ list_for_each_safe(qe, qen, waitq) {
+ /**
+ * Callback only as long as there is room in request queue
+ */
+ if (bfa_reqq_full(bfa, qid))
+ break;
+
+ list_del(qe);
+ wqe = (struct bfa_reqq_wait_s *) qe;
+ wqe->qresume(wqe->cbarg);
+ }
+}
+
+void
+bfa_isr_unhandled(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+ bfa_trc(bfa, m->mhdr.msg_class);
+ bfa_trc(bfa, m->mhdr.msg_id);
+ bfa_trc(bfa, m->mhdr.mtag.i2htok);
+ bfa_assert(0);
+ bfa_trc_stop(bfa->trcmod);
+}
+
+void
+bfa_msix_rspq(struct bfa_s *bfa, int rsp_qid)
+{
+ struct bfi_msg_s *m;
+ u32 pi, ci;
+
+ bfa_trc_fp(bfa, rsp_qid);
+
+ rsp_qid &= (BFI_IOC_MAX_CQS - 1);
+
+ bfa->iocfc.hwif.hw_rspq_ack(bfa, rsp_qid);
+
+ ci = bfa_rspq_ci(bfa, rsp_qid);
+ pi = bfa_rspq_pi(bfa, rsp_qid);
+
+ bfa_trc_fp(bfa, ci);
+ bfa_trc_fp(bfa, pi);
+
+ if (bfa->rme_process) {
+ while (ci != pi) {
+ m = bfa_rspq_elem(bfa, rsp_qid, ci);
+ bfa_assert_fp(m->mhdr.msg_class < BFI_MC_MAX);
+
+ bfa_isrs[m->mhdr.msg_class] (bfa, m);
+
+ CQ_INCR(ci, bfa->iocfc.cfg.drvcfg.num_rspq_elems);
+ }
+ }
+
+ /**
+ * update CI
+ */
+ bfa_rspq_ci(bfa, rsp_qid) = pi;
+ bfa_reg_write(bfa->iocfc.bfa_regs.rme_q_ci[rsp_qid], pi);
+ bfa_os_mmiowb();
+}
+
+void
+bfa_msix_lpu_err(struct bfa_s *bfa, int vec)
+{
+ u32 intr;
+
+ intr = bfa_reg_read(bfa->iocfc.bfa_regs.intr_status);
+
+ if (intr & (__HFN_INT_MBOX_LPU0 | __HFN_INT_MBOX_LPU1))
+ bfa_msix_lpu(bfa);
+
+ if (intr & (__HFN_INT_ERR_EMC |
+ __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 |
+ __HFN_INT_ERR_PSS))
+ bfa_msix_errint(bfa, intr);
+}
+
+void
+bfa_isr_bind(enum bfi_mclass mc, bfa_isr_func_t isr_func)
+{
+ bfa_isrs[mc] = isr_func;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_INTR_PRIV_H__
+#define __BFA_INTR_PRIV_H__
+
+/**
+ * Message handler
+ */
+typedef void (*bfa_isr_func_t) (struct bfa_s *bfa, struct bfi_msg_s *m);
+void bfa_isr_unhandled(struct bfa_s *bfa, struct bfi_msg_s *m);
+void bfa_isr_bind(enum bfi_mclass mc, bfa_isr_func_t isr_func);
+
+
+#define bfa_reqq_pi(__bfa, __reqq) (__bfa)->iocfc.req_cq_pi[__reqq]
+#define bfa_reqq_ci(__bfa, __reqq) \
+ *(u32 *)((__bfa)->iocfc.req_cq_shadow_ci[__reqq].kva)
+
+#define bfa_reqq_full(__bfa, __reqq) \
+ (((bfa_reqq_pi(__bfa, __reqq) + 1) & \
+ ((__bfa)->iocfc.cfg.drvcfg.num_reqq_elems - 1)) == \
+ bfa_reqq_ci(__bfa, __reqq))
+
+#define bfa_reqq_next(__bfa, __reqq) \
+ (bfa_reqq_full(__bfa, __reqq) ? NULL : \
+ ((void *)((struct bfi_msg_s *)((__bfa)->iocfc.req_cq_ba[__reqq].kva) \
+ + bfa_reqq_pi((__bfa), (__reqq)))))
+
+#define bfa_reqq_produce(__bfa, __reqq) do { \
+ (__bfa)->iocfc.req_cq_pi[__reqq]++; \
+ (__bfa)->iocfc.req_cq_pi[__reqq] &= \
+ ((__bfa)->iocfc.cfg.drvcfg.num_reqq_elems - 1); \
+ bfa_reg_write((__bfa)->iocfc.bfa_regs.cpe_q_pi[__reqq], \
+ (__bfa)->iocfc.req_cq_pi[__reqq]); \
+ bfa_os_mmiowb(); \
+} while (0)
+
+#define bfa_rspq_pi(__bfa, __rspq) \
+ *(u32 *)((__bfa)->iocfc.rsp_cq_shadow_pi[__rspq].kva)
+
+#define bfa_rspq_ci(__bfa, __rspq) (__bfa)->iocfc.rsp_cq_ci[__rspq]
+#define bfa_rspq_elem(__bfa, __rspq, __ci) \
+ &((struct bfi_msg_s *)((__bfa)->iocfc.rsp_cq_ba[__rspq].kva))[__ci]
+
+#define CQ_INCR(__index, __size) \
+ (__index)++; (__index) &= ((__size) - 1)
+
+/**
+ * Queue element to wait for room in request queue. FIFO order is
+ * maintained when fullfilling requests.
+ */
+struct bfa_reqq_wait_s {
+ struct list_head qe;
+ void (*qresume) (void *cbarg);
+ void *cbarg;
+};
+
+/**
+ * Circular queue usage assignments
+ */
+enum {
+ BFA_REQQ_IOC = 0, /* all low-priority IOC msgs */
+ BFA_REQQ_FCXP = 0, /* all FCXP messages */
+ BFA_REQQ_LPS = 0, /* all lport service msgs */
+ BFA_REQQ_PORT = 0, /* all port messages */
+ BFA_REQQ_FLASH = 0, /* for flash module */
+ BFA_REQQ_DIAG = 0, /* for diag module */
+ BFA_REQQ_RPORT = 0, /* all port messages */
+ BFA_REQQ_SBOOT = 0, /* all san boot messages */
+ BFA_REQQ_QOS_LO = 1, /* all low priority IO */
+ BFA_REQQ_QOS_MD = 2, /* all medium priority IO */
+ BFA_REQQ_QOS_HI = 3, /* all high priority IO */
+};
+
+static inline void
+bfa_reqq_winit(struct bfa_reqq_wait_s *wqe, void (*qresume) (void *cbarg),
+ void *cbarg)
+{
+ wqe->qresume = qresume;
+ wqe->cbarg = cbarg;
+}
+
+#define bfa_reqq(__bfa, __reqq) &(__bfa)->reqq_waitq[__reqq]
+
+/**
+ * static inline void
+ * bfa_reqq_wait(struct bfa_s *bfa, int reqq, struct bfa_reqq_wait_s *wqe)
+ */
+#define bfa_reqq_wait(__bfa, __reqq, __wqe) do { \
+ \
+ struct list_head *waitq = bfa_reqq(__bfa, __reqq); \
+ \
+ bfa_assert(((__reqq) < BFI_IOC_MAX_CQS)); \
+ bfa_assert((__wqe)->qresume && (__wqe)->cbarg); \
+ \
+ list_add_tail(&(__wqe)->qe, waitq); \
+} while (0)
+
+#define bfa_reqq_wcancel(__wqe) list_del(&(__wqe)->qe)
+
+#endif /* __BFA_INTR_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_ioc.h>
+#include <bfa_fwimg_priv.h>
+#include <bfa_trcmod_priv.h>
+#include <cs/bfa_debug.h>
+#include <bfi/bfi_ioc.h>
+#include <bfi/bfi_ctreg.h>
+#include <aen/bfa_aen_ioc.h>
+#include <aen/bfa_aen.h>
+#include <log/bfa_log_hal.h>
+#include <defs/bfa_defs_pci.h>
+
+BFA_TRC_FILE(HAL, IOC);
+
+/**
+ * IOC local definitions
+ */
+#define BFA_IOC_TOV 2000 /* msecs */
+#define BFA_IOC_HB_TOV 1000 /* msecs */
+#define BFA_IOC_HB_FAIL_MAX 4
+#define BFA_IOC_HWINIT_MAX 2
+#define BFA_IOC_FWIMG_MINSZ (16 * 1024)
+#define BFA_IOC_TOV_RECOVER (BFA_IOC_HB_FAIL_MAX * BFA_IOC_HB_TOV \
+ + BFA_IOC_TOV)
+
+#define bfa_ioc_timer_start(__ioc) \
+ bfa_timer_begin((__ioc)->timer_mod, &(__ioc)->ioc_timer, \
+ bfa_ioc_timeout, (__ioc), BFA_IOC_TOV)
+#define bfa_ioc_timer_stop(__ioc) bfa_timer_stop(&(__ioc)->ioc_timer)
+
+#define BFA_DBG_FWTRC_ENTS (BFI_IOC_TRC_ENTS)
+#define BFA_DBG_FWTRC_LEN \
+ (BFA_DBG_FWTRC_ENTS * sizeof(struct bfa_trc_s) + \
+ (sizeof(struct bfa_trc_mod_s) - \
+ BFA_TRC_MAX * sizeof(struct bfa_trc_s)))
+#define BFA_DBG_FWTRC_OFF(_fn) (BFI_IOC_TRC_OFF + BFA_DBG_FWTRC_LEN * (_fn))
+#define bfa_ioc_stats(_ioc, _stats) (_ioc)->stats._stats ++
+
+#define BFA_FLASH_CHUNK_NO(off) (off / BFI_FLASH_CHUNK_SZ_WORDS)
+#define BFA_FLASH_OFFSET_IN_CHUNK(off) (off % BFI_FLASH_CHUNK_SZ_WORDS)
+#define BFA_FLASH_CHUNK_ADDR(chunkno) (chunkno * BFI_FLASH_CHUNK_SZ_WORDS)
+bfa_boolean_t bfa_auto_recover = BFA_FALSE;
+
+/*
+ * forward declarations
+ */
+static void bfa_ioc_aen_post(struct bfa_ioc_s *bfa,
+ enum bfa_ioc_aen_event event);
+static void bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc);
+static void bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc);
+static void bfa_ioc_hw_sem_get_cancel(struct bfa_ioc_s *ioc);
+static void bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force);
+static void bfa_ioc_timeout(void *ioc);
+static void bfa_ioc_send_enable(struct bfa_ioc_s *ioc);
+static void bfa_ioc_send_disable(struct bfa_ioc_s *ioc);
+static void bfa_ioc_send_getattr(struct bfa_ioc_s *ioc);
+static void bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc);
+static void bfa_ioc_hb_stop(struct bfa_ioc_s *ioc);
+static void bfa_ioc_reset(struct bfa_ioc_s *ioc, bfa_boolean_t force);
+static void bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc);
+static void bfa_ioc_mbox_hbfail(struct bfa_ioc_s *ioc);
+static void bfa_ioc_recover(struct bfa_ioc_s *ioc);
+static bfa_boolean_t bfa_ioc_firmware_lock(struct bfa_ioc_s *ioc);
+static void bfa_ioc_firmware_unlock(struct bfa_ioc_s *ioc);
+static void bfa_ioc_disable_comp(struct bfa_ioc_s *ioc);
+static void bfa_ioc_lpu_stop(struct bfa_ioc_s *ioc);
+
+/**
+ * bfa_ioc_sm
+ */
+
+/**
+ * IOC state machine events
+ */
+enum ioc_event {
+ IOC_E_ENABLE = 1, /* IOC enable request */
+ IOC_E_DISABLE = 2, /* IOC disable request */
+ IOC_E_TIMEOUT = 3, /* f/w response timeout */
+ IOC_E_FWREADY = 4, /* f/w initialization done */
+ IOC_E_FWRSP_GETATTR = 5, /* IOC get attribute response */
+ IOC_E_FWRSP_ENABLE = 6, /* enable f/w response */
+ IOC_E_FWRSP_DISABLE = 7, /* disable f/w response */
+ IOC_E_HBFAIL = 8, /* heartbeat failure */
+ IOC_E_HWERROR = 9, /* hardware error interrupt */
+ IOC_E_SEMLOCKED = 10, /* h/w semaphore is locked */
+ IOC_E_DETACH = 11, /* driver detach cleanup */
+};
+
+bfa_fsm_state_decl(bfa_ioc, reset, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, fwcheck, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, mismatch, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, semwait, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, hwinit, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, enabling, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, getattr, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, op, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, initfail, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, hbfail, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, disabling, struct bfa_ioc_s, enum ioc_event);
+bfa_fsm_state_decl(bfa_ioc, disabled, struct bfa_ioc_s, enum ioc_event);
+
+static struct bfa_sm_table_s ioc_sm_table[] = {
+ {BFA_SM(bfa_ioc_sm_reset), BFA_IOC_RESET},
+ {BFA_SM(bfa_ioc_sm_fwcheck), BFA_IOC_FWMISMATCH},
+ {BFA_SM(bfa_ioc_sm_mismatch), BFA_IOC_FWMISMATCH},
+ {BFA_SM(bfa_ioc_sm_semwait), BFA_IOC_SEMWAIT},
+ {BFA_SM(bfa_ioc_sm_hwinit), BFA_IOC_HWINIT},
+ {BFA_SM(bfa_ioc_sm_enabling), BFA_IOC_HWINIT},
+ {BFA_SM(bfa_ioc_sm_getattr), BFA_IOC_GETATTR},
+ {BFA_SM(bfa_ioc_sm_op), BFA_IOC_OPERATIONAL},
+ {BFA_SM(bfa_ioc_sm_initfail), BFA_IOC_INITFAIL},
+ {BFA_SM(bfa_ioc_sm_hbfail), BFA_IOC_HBFAIL},
+ {BFA_SM(bfa_ioc_sm_disabling), BFA_IOC_DISABLING},
+ {BFA_SM(bfa_ioc_sm_disabled), BFA_IOC_DISABLED},
+};
+
+/**
+ * Reset entry actions -- initialize state machine
+ */
+static void
+bfa_ioc_sm_reset_entry(struct bfa_ioc_s *ioc)
+{
+ ioc->retry_count = 0;
+ ioc->auto_recover = bfa_auto_recover;
+}
+
+/**
+ * Beginning state. IOC is in reset state.
+ */
+static void
+bfa_ioc_sm_reset(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_ENABLE:
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_fwcheck);
+ break;
+
+ case IOC_E_DISABLE:
+ bfa_ioc_disable_comp(ioc);
+ break;
+
+ case IOC_E_DETACH:
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+/**
+ * Semaphore should be acquired for version check.
+ */
+static void
+bfa_ioc_sm_fwcheck_entry(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_hw_sem_get(ioc);
+}
+
+/**
+ * Awaiting h/w semaphore to continue with version check.
+ */
+static void
+bfa_ioc_sm_fwcheck(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_SEMLOCKED:
+ if (bfa_ioc_firmware_lock(ioc)) {
+ ioc->retry_count = 0;
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
+ } else {
+ bfa_ioc_hw_sem_release(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_mismatch);
+ }
+ break;
+
+ case IOC_E_DISABLE:
+ bfa_ioc_disable_comp(ioc);
+ /*
+ * fall through
+ */
+
+ case IOC_E_DETACH:
+ bfa_ioc_hw_sem_get_cancel(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+ break;
+
+ case IOC_E_FWREADY:
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+/**
+ * Notify enable completion callback and generate mismatch AEN.
+ */
+static void
+bfa_ioc_sm_mismatch_entry(struct bfa_ioc_s *ioc)
+{
+ /**
+ * Provide enable completion callback and AEN notification only once.
+ */
+ if (ioc->retry_count == 0) {
+ ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+ bfa_ioc_aen_post(ioc, BFA_IOC_AEN_FWMISMATCH);
+ }
+ ioc->retry_count++;
+ bfa_ioc_timer_start(ioc);
+}
+
+/**
+ * Awaiting firmware version match.
+ */
+static void
+bfa_ioc_sm_mismatch(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_TIMEOUT:
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_fwcheck);
+ break;
+
+ case IOC_E_DISABLE:
+ bfa_ioc_disable_comp(ioc);
+ /*
+ * fall through
+ */
+
+ case IOC_E_DETACH:
+ bfa_ioc_timer_stop(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+ break;
+
+ case IOC_E_FWREADY:
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+/**
+ * Request for semaphore.
+ */
+static void
+bfa_ioc_sm_semwait_entry(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_hw_sem_get(ioc);
+}
+
+/**
+ * Awaiting semaphore for h/w initialzation.
+ */
+static void
+bfa_ioc_sm_semwait(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_SEMLOCKED:
+ ioc->retry_count = 0;
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
+ break;
+
+ case IOC_E_DISABLE:
+ bfa_ioc_hw_sem_get_cancel(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+
+static void
+bfa_ioc_sm_hwinit_entry(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_timer_start(ioc);
+ bfa_ioc_reset(ioc, BFA_FALSE);
+}
+
+/**
+ * Hardware is being initialized. Interrupts are enabled.
+ * Holding hardware semaphore lock.
+ */
+static void
+bfa_ioc_sm_hwinit(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_FWREADY:
+ bfa_ioc_timer_stop(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_enabling);
+ break;
+
+ case IOC_E_HWERROR:
+ bfa_ioc_timer_stop(ioc);
+ /*
+ * fall through
+ */
+
+ case IOC_E_TIMEOUT:
+ ioc->retry_count++;
+ if (ioc->retry_count < BFA_IOC_HWINIT_MAX) {
+ bfa_ioc_timer_start(ioc);
+ bfa_ioc_reset(ioc, BFA_TRUE);
+ break;
+ }
+
+ bfa_ioc_hw_sem_release(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+ break;
+
+ case IOC_E_DISABLE:
+ bfa_ioc_hw_sem_release(ioc);
+ bfa_ioc_timer_stop(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+
+static void
+bfa_ioc_sm_enabling_entry(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_timer_start(ioc);
+ bfa_ioc_send_enable(ioc);
+}
+
+/**
+ * Host IOC function is being enabled, awaiting response from firmware.
+ * Semaphore is acquired.
+ */
+static void
+bfa_ioc_sm_enabling(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_FWRSP_ENABLE:
+ bfa_ioc_timer_stop(ioc);
+ bfa_ioc_hw_sem_release(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_getattr);
+ break;
+
+ case IOC_E_HWERROR:
+ bfa_ioc_timer_stop(ioc);
+ /*
+ * fall through
+ */
+
+ case IOC_E_TIMEOUT:
+ ioc->retry_count++;
+ if (ioc->retry_count < BFA_IOC_HWINIT_MAX) {
+ bfa_reg_write(ioc->ioc_regs.ioc_fwstate,
+ BFI_IOC_UNINIT);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_hwinit);
+ break;
+ }
+
+ bfa_ioc_hw_sem_release(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+ break;
+
+ case IOC_E_DISABLE:
+ bfa_ioc_timer_stop(ioc);
+ bfa_ioc_hw_sem_release(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+ break;
+
+ case IOC_E_FWREADY:
+ bfa_ioc_send_enable(ioc);
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+
+static void
+bfa_ioc_sm_getattr_entry(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_timer_start(ioc);
+ bfa_ioc_send_getattr(ioc);
+}
+
+/**
+ * IOC configuration in progress. Timer is active.
+ */
+static void
+bfa_ioc_sm_getattr(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_FWRSP_GETATTR:
+ bfa_ioc_timer_stop(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_op);
+ break;
+
+ case IOC_E_HWERROR:
+ bfa_ioc_timer_stop(ioc);
+ /*
+ * fall through
+ */
+
+ case IOC_E_TIMEOUT:
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_initfail);
+ break;
+
+ case IOC_E_DISABLE:
+ bfa_ioc_timer_stop(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+
+static void
+bfa_ioc_sm_op_entry(struct bfa_ioc_s *ioc)
+{
+ ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_OK);
+ bfa_ioc_hb_monitor(ioc);
+ bfa_ioc_aen_post(ioc, BFA_IOC_AEN_ENABLE);
+}
+
+static void
+bfa_ioc_sm_op(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_ENABLE:
+ break;
+
+ case IOC_E_DISABLE:
+ bfa_ioc_hb_stop(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_disabling);
+ break;
+
+ case IOC_E_HWERROR:
+ case IOC_E_FWREADY:
+ /**
+ * Hard error or IOC recovery by other function.
+ * Treat it same as heartbeat failure.
+ */
+ bfa_ioc_hb_stop(ioc);
+ /*
+ * !!! fall through !!!
+ */
+
+ case IOC_E_HBFAIL:
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_hbfail);
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+
+static void
+bfa_ioc_sm_disabling_entry(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_aen_post(ioc, BFA_IOC_AEN_DISABLE);
+ bfa_ioc_timer_start(ioc);
+ bfa_ioc_send_disable(ioc);
+}
+
+/**
+ * IOC is being disabled
+ */
+static void
+bfa_ioc_sm_disabling(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_HWERROR:
+ case IOC_E_FWRSP_DISABLE:
+ bfa_ioc_timer_stop(ioc);
+ /*
+ * !!! fall through !!!
+ */
+
+ case IOC_E_TIMEOUT:
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+/**
+ * IOC disable completion entry.
+ */
+static void
+bfa_ioc_sm_disabled_entry(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_disable_comp(ioc);
+}
+
+static void
+bfa_ioc_sm_disabled(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_ENABLE:
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+ break;
+
+ case IOC_E_DISABLE:
+ ioc->cbfn->disable_cbfn(ioc->bfa);
+ break;
+
+ case IOC_E_FWREADY:
+ break;
+
+ case IOC_E_DETACH:
+ bfa_ioc_firmware_unlock(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+
+static void
+bfa_ioc_sm_initfail_entry(struct bfa_ioc_s *ioc)
+{
+ ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+ bfa_ioc_timer_start(ioc);
+}
+
+/**
+ * Hardware initialization failed.
+ */
+static void
+bfa_ioc_sm_initfail(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+ case IOC_E_DISABLE:
+ bfa_ioc_timer_stop(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+ break;
+
+ case IOC_E_DETACH:
+ bfa_ioc_timer_stop(ioc);
+ bfa_ioc_firmware_unlock(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+ break;
+
+ case IOC_E_TIMEOUT:
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+
+static void
+bfa_ioc_sm_hbfail_entry(struct bfa_ioc_s *ioc)
+{
+ struct list_head *qe;
+ struct bfa_ioc_hbfail_notify_s *notify;
+
+ /**
+ * Mark IOC as failed in hardware and stop firmware.
+ */
+ bfa_ioc_lpu_stop(ioc);
+ bfa_reg_write(ioc->ioc_regs.ioc_fwstate, BFI_IOC_HBFAIL);
+
+ if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
+ bfa_reg_write(ioc->ioc_regs.ll_halt, __FW_INIT_HALT_P);
+ /*
+ * Wait for halt to take effect
+ */
+ bfa_reg_read(ioc->ioc_regs.ll_halt);
+ }
+
+ /**
+ * Notify driver and common modules registered for notification.
+ */
+ ioc->cbfn->hbfail_cbfn(ioc->bfa);
+ list_for_each(qe, &ioc->hb_notify_q) {
+ notify = (struct bfa_ioc_hbfail_notify_s *)qe;
+ notify->cbfn(notify->cbarg);
+ }
+
+ /**
+ * Flush any queued up mailbox requests.
+ */
+ bfa_ioc_mbox_hbfail(ioc);
+ bfa_ioc_aen_post(ioc, BFA_IOC_AEN_HBFAIL);
+
+ /**
+ * Trigger auto-recovery after a delay.
+ */
+ if (ioc->auto_recover) {
+ bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer,
+ bfa_ioc_timeout, ioc, BFA_IOC_TOV_RECOVER);
+ }
+}
+
+/**
+ * IOC heartbeat failure.
+ */
+static void
+bfa_ioc_sm_hbfail(struct bfa_ioc_s *ioc, enum ioc_event event)
+{
+ bfa_trc(ioc, event);
+
+ switch (event) {
+
+ case IOC_E_ENABLE:
+ ioc->cbfn->enable_cbfn(ioc->bfa, BFA_STATUS_IOC_FAILURE);
+ break;
+
+ case IOC_E_DISABLE:
+ if (ioc->auto_recover)
+ bfa_ioc_timer_stop(ioc);
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_disabled);
+ break;
+
+ case IOC_E_TIMEOUT:
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_semwait);
+ break;
+
+ case IOC_E_FWREADY:
+ /**
+ * Recovery is already initiated by other function.
+ */
+ break;
+
+ default:
+ bfa_sm_fault(ioc, event);
+ }
+}
+
+
+
+/**
+ * bfa_ioc_pvt BFA IOC private functions
+ */
+
+static void
+bfa_ioc_disable_comp(struct bfa_ioc_s *ioc)
+{
+ struct list_head *qe;
+ struct bfa_ioc_hbfail_notify_s *notify;
+
+ ioc->cbfn->disable_cbfn(ioc->bfa);
+
+ /**
+ * Notify common modules registered for notification.
+ */
+ list_for_each(qe, &ioc->hb_notify_q) {
+ notify = (struct bfa_ioc_hbfail_notify_s *)qe;
+ notify->cbfn(notify->cbarg);
+ }
+}
+
+static void
+bfa_ioc_sem_timeout(void *ioc_arg)
+{
+ struct bfa_ioc_s *ioc = (struct bfa_ioc_s *)ioc_arg;
+
+ bfa_ioc_hw_sem_get(ioc);
+}
+
+static void
+bfa_ioc_usage_sem_get(struct bfa_ioc_s *ioc)
+{
+ u32 r32;
+ int cnt = 0;
+#define BFA_SEM_SPINCNT 1000
+
+ do {
+ r32 = bfa_reg_read(ioc->ioc_regs.ioc_usage_sem_reg);
+ cnt++;
+ if (cnt > BFA_SEM_SPINCNT)
+ break;
+ } while (r32 != 0);
+ bfa_assert(cnt < BFA_SEM_SPINCNT);
+}
+
+static void
+bfa_ioc_usage_sem_release(struct bfa_ioc_s *ioc)
+{
+ bfa_reg_write(ioc->ioc_regs.ioc_usage_sem_reg, 1);
+}
+
+static void
+bfa_ioc_hw_sem_get(struct bfa_ioc_s *ioc)
+{
+ u32 r32;
+
+ /**
+ * First read to the semaphore register will return 0, subsequent reads
+ * will return 1. Semaphore is released by writing 0 to the register
+ */
+ r32 = bfa_reg_read(ioc->ioc_regs.ioc_sem_reg);
+ if (r32 == 0) {
+ bfa_fsm_send_event(ioc, IOC_E_SEMLOCKED);
+ return;
+ }
+
+ bfa_timer_begin(ioc->timer_mod, &ioc->sem_timer, bfa_ioc_sem_timeout,
+ ioc, BFA_IOC_TOV);
+}
+
+static void
+bfa_ioc_hw_sem_release(struct bfa_ioc_s *ioc)
+{
+ bfa_reg_write(ioc->ioc_regs.ioc_sem_reg, 1);
+}
+
+static void
+bfa_ioc_hw_sem_get_cancel(struct bfa_ioc_s *ioc)
+{
+ bfa_timer_stop(&ioc->sem_timer);
+}
+
+/**
+ * Initialize LPU local memory (aka secondary memory / SRAM)
+ */
+static void
+bfa_ioc_lmem_init(struct bfa_ioc_s *ioc)
+{
+ u32 pss_ctl;
+ int i;
+#define PSS_LMEM_INIT_TIME 10000
+
+ pss_ctl = bfa_reg_read(ioc->ioc_regs.pss_ctl_reg);
+ pss_ctl &= ~__PSS_LMEM_RESET;
+ pss_ctl |= __PSS_LMEM_INIT_EN;
+ pss_ctl |= __PSS_I2C_CLK_DIV(3UL); /* i2c workaround 12.5khz clock */
+ bfa_reg_write(ioc->ioc_regs.pss_ctl_reg, pss_ctl);
+
+ /**
+ * wait for memory initialization to be complete
+ */
+ i = 0;
+ do {
+ pss_ctl = bfa_reg_read(ioc->ioc_regs.pss_ctl_reg);
+ i++;
+ } while (!(pss_ctl & __PSS_LMEM_INIT_DONE) && (i < PSS_LMEM_INIT_TIME));
+
+ /**
+ * If memory initialization is not successful, IOC timeout will catch
+ * such failures.
+ */
+ bfa_assert(pss_ctl & __PSS_LMEM_INIT_DONE);
+ bfa_trc(ioc, pss_ctl);
+
+ pss_ctl &= ~(__PSS_LMEM_INIT_DONE | __PSS_LMEM_INIT_EN);
+ bfa_reg_write(ioc->ioc_regs.pss_ctl_reg, pss_ctl);
+}
+
+static void
+bfa_ioc_lpu_start(struct bfa_ioc_s *ioc)
+{
+ u32 pss_ctl;
+
+ /**
+ * Take processor out of reset.
+ */
+ pss_ctl = bfa_reg_read(ioc->ioc_regs.pss_ctl_reg);
+ pss_ctl &= ~__PSS_LPU0_RESET;
+
+ bfa_reg_write(ioc->ioc_regs.pss_ctl_reg, pss_ctl);
+}
+
+static void
+bfa_ioc_lpu_stop(struct bfa_ioc_s *ioc)
+{
+ u32 pss_ctl;
+
+ /**
+ * Put processors in reset.
+ */
+ pss_ctl = bfa_reg_read(ioc->ioc_regs.pss_ctl_reg);
+ pss_ctl |= (__PSS_LPU0_RESET | __PSS_LPU1_RESET);
+
+ bfa_reg_write(ioc->ioc_regs.pss_ctl_reg, pss_ctl);
+}
+
+/**
+ * Get driver and firmware versions.
+ */
+static void
+bfa_ioc_fwver_get(struct bfa_ioc_s *ioc, struct bfi_ioc_image_hdr_s *fwhdr)
+{
+ u32 pgnum, pgoff;
+ u32 loff = 0;
+ int i;
+ u32 *fwsig = (u32 *) fwhdr;
+
+ pgnum = bfa_ioc_smem_pgnum(ioc, loff);
+ pgoff = bfa_ioc_smem_pgoff(ioc, loff);
+ bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+
+ for (i = 0; i < (sizeof(struct bfi_ioc_image_hdr_s) / sizeof(u32));
+ i++) {
+ fwsig[i] = bfa_mem_read(ioc->ioc_regs.smem_page_start, loff);
+ loff += sizeof(u32);
+ }
+}
+
+static u32 *
+bfa_ioc_fwimg_get_chunk(struct bfa_ioc_s *ioc, u32 off)
+{
+ if (ioc->ctdev)
+ return bfi_image_ct_get_chunk(off);
+ return bfi_image_cb_get_chunk(off);
+}
+
+static u32
+bfa_ioc_fwimg_get_size(struct bfa_ioc_s *ioc)
+{
+return (ioc->ctdev) ? bfi_image_ct_size : bfi_image_cb_size;
+}
+
+/**
+ * Returns TRUE if same.
+ */
+static bfa_boolean_t
+bfa_ioc_fwver_cmp(struct bfa_ioc_s *ioc, struct bfi_ioc_image_hdr_s *fwhdr)
+{
+ struct bfi_ioc_image_hdr_s *drv_fwhdr;
+ int i;
+
+ drv_fwhdr =
+ (struct bfi_ioc_image_hdr_s *)bfa_ioc_fwimg_get_chunk(ioc, 0);
+
+ for (i = 0; i < BFI_IOC_MD5SUM_SZ; i++) {
+ if (fwhdr->md5sum[i] != drv_fwhdr->md5sum[i]) {
+ bfa_trc(ioc, i);
+ bfa_trc(ioc, fwhdr->md5sum[i]);
+ bfa_trc(ioc, drv_fwhdr->md5sum[i]);
+ return BFA_FALSE;
+ }
+ }
+
+ bfa_trc(ioc, fwhdr->md5sum[0]);
+ return BFA_TRUE;
+}
+
+/**
+ * Return true if current running version is valid. Firmware signature and
+ * execution context (driver/bios) must match.
+ */
+static bfa_boolean_t
+bfa_ioc_fwver_valid(struct bfa_ioc_s *ioc)
+{
+ struct bfi_ioc_image_hdr_s fwhdr, *drv_fwhdr;
+
+ /**
+ * If bios/efi boot (flash based) -- return true
+ */
+ if (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
+ return BFA_TRUE;
+
+ bfa_ioc_fwver_get(ioc, &fwhdr);
+ drv_fwhdr =
+ (struct bfi_ioc_image_hdr_s *)bfa_ioc_fwimg_get_chunk(ioc, 0);
+
+ if (fwhdr.signature != drv_fwhdr->signature) {
+ bfa_trc(ioc, fwhdr.signature);
+ bfa_trc(ioc, drv_fwhdr->signature);
+ return BFA_FALSE;
+ }
+
+ if (fwhdr.exec != drv_fwhdr->exec) {
+ bfa_trc(ioc, fwhdr.exec);
+ bfa_trc(ioc, drv_fwhdr->exec);
+ return BFA_FALSE;
+ }
+
+ return bfa_ioc_fwver_cmp(ioc, &fwhdr);
+}
+
+/**
+ * Return true if firmware of current driver matches the running firmware.
+ */
+static bfa_boolean_t
+bfa_ioc_firmware_lock(struct bfa_ioc_s *ioc)
+{
+ enum bfi_ioc_state ioc_fwstate;
+ u32 usecnt;
+ struct bfi_ioc_image_hdr_s fwhdr;
+
+ /**
+ * Firmware match check is relevant only for CNA.
+ */
+ if (!ioc->cna)
+ return BFA_TRUE;
+
+ /**
+ * If bios boot (flash based) -- do not increment usage count
+ */
+ if (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
+ return BFA_TRUE;
+
+ bfa_ioc_usage_sem_get(ioc);
+ usecnt = bfa_reg_read(ioc->ioc_regs.ioc_usage_reg);
+
+ /**
+ * If usage count is 0, always return TRUE.
+ */
+ if (usecnt == 0) {
+ bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, 1);
+ bfa_ioc_usage_sem_release(ioc);
+ bfa_trc(ioc, usecnt);
+ return BFA_TRUE;
+ }
+
+ ioc_fwstate = bfa_reg_read(ioc->ioc_regs.ioc_fwstate);
+ bfa_trc(ioc, ioc_fwstate);
+
+ /**
+ * Use count cannot be non-zero and chip in uninitialized state.
+ */
+ bfa_assert(ioc_fwstate != BFI_IOC_UNINIT);
+
+ /**
+ * Check if another driver with a different firmware is active
+ */
+ bfa_ioc_fwver_get(ioc, &fwhdr);
+ if (!bfa_ioc_fwver_cmp(ioc, &fwhdr)) {
+ bfa_ioc_usage_sem_release(ioc);
+ bfa_trc(ioc, usecnt);
+ return BFA_FALSE;
+ }
+
+ /**
+ * Same firmware version. Increment the reference count.
+ */
+ usecnt++;
+ bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, usecnt);
+ bfa_ioc_usage_sem_release(ioc);
+ bfa_trc(ioc, usecnt);
+ return BFA_TRUE;
+}
+
+static void
+bfa_ioc_firmware_unlock(struct bfa_ioc_s *ioc)
+{
+ u32 usecnt;
+
+ /**
+ * Firmware lock is relevant only for CNA.
+ * If bios boot (flash based) -- do not decrement usage count
+ */
+ if (!ioc->cna || (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ))
+ return;
+
+ /**
+ * decrement usage count
+ */
+ bfa_ioc_usage_sem_get(ioc);
+ usecnt = bfa_reg_read(ioc->ioc_regs.ioc_usage_reg);
+ bfa_assert(usecnt > 0);
+
+ usecnt--;
+ bfa_reg_write(ioc->ioc_regs.ioc_usage_reg, usecnt);
+ bfa_trc(ioc, usecnt);
+
+ bfa_ioc_usage_sem_release(ioc);
+}
+
+/**
+ * Conditionally flush any pending message from firmware at start.
+ */
+static void
+bfa_ioc_msgflush(struct bfa_ioc_s *ioc)
+{
+ u32 r32;
+
+ r32 = bfa_reg_read(ioc->ioc_regs.lpu_mbox_cmd);
+ if (r32)
+ bfa_reg_write(ioc->ioc_regs.lpu_mbox_cmd, 1);
+}
+
+
+static void
+bfa_ioc_hwinit(struct bfa_ioc_s *ioc, bfa_boolean_t force)
+{
+ enum bfi_ioc_state ioc_fwstate;
+ bfa_boolean_t fwvalid;
+
+ ioc_fwstate = bfa_reg_read(ioc->ioc_regs.ioc_fwstate);
+
+ if (force)
+ ioc_fwstate = BFI_IOC_UNINIT;
+
+ bfa_trc(ioc, ioc_fwstate);
+
+ /**
+ * check if firmware is valid
+ */
+ fwvalid = (ioc_fwstate == BFI_IOC_UNINIT) ?
+ BFA_FALSE : bfa_ioc_fwver_valid(ioc);
+
+ if (!fwvalid) {
+ bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, ioc->pcidev.device_id);
+ return;
+ }
+
+ /**
+ * If hardware initialization is in progress (initialized by other IOC),
+ * just wait for an initialization completion interrupt.
+ */
+ if (ioc_fwstate == BFI_IOC_INITING) {
+ bfa_trc(ioc, ioc_fwstate);
+ ioc->cbfn->reset_cbfn(ioc->bfa);
+ return;
+ }
+
+ /**
+ * If IOC function is disabled and firmware version is same,
+ * just re-enable IOC.
+ */
+ if (ioc_fwstate == BFI_IOC_DISABLED || ioc_fwstate == BFI_IOC_OP) {
+ bfa_trc(ioc, ioc_fwstate);
+
+ /**
+ * When using MSI-X any pending firmware ready event should
+ * be flushed. Otherwise MSI-X interrupts are not delivered.
+ */
+ bfa_ioc_msgflush(ioc);
+ ioc->cbfn->reset_cbfn(ioc->bfa);
+ bfa_fsm_send_event(ioc, IOC_E_FWREADY);
+ return;
+ }
+
+ /**
+ * Initialize the h/w for any other states.
+ */
+ bfa_ioc_boot(ioc, BFI_BOOT_TYPE_NORMAL, ioc->pcidev.device_id);
+}
+
+static void
+bfa_ioc_timeout(void *ioc_arg)
+{
+ struct bfa_ioc_s *ioc = (struct bfa_ioc_s *)ioc_arg;
+
+ bfa_trc(ioc, 0);
+ bfa_fsm_send_event(ioc, IOC_E_TIMEOUT);
+}
+
+void
+bfa_ioc_mbox_send(struct bfa_ioc_s *ioc, void *ioc_msg, int len)
+{
+ u32 *msgp = (u32 *) ioc_msg;
+ u32 i;
+
+ bfa_trc(ioc, msgp[0]);
+ bfa_trc(ioc, len);
+
+ bfa_assert(len <= BFI_IOC_MSGLEN_MAX);
+
+ /*
+ * first write msg to mailbox registers
+ */
+ for (i = 0; i < len / sizeof(u32); i++)
+ bfa_reg_write(ioc->ioc_regs.hfn_mbox + i * sizeof(u32),
+ bfa_os_wtole(msgp[i]));
+
+ for (; i < BFI_IOC_MSGLEN_MAX / sizeof(u32); i++)
+ bfa_reg_write(ioc->ioc_regs.hfn_mbox + i * sizeof(u32), 0);
+
+ /*
+ * write 1 to mailbox CMD to trigger LPU event
+ */
+ bfa_reg_write(ioc->ioc_regs.hfn_mbox_cmd, 1);
+ (void)bfa_reg_read(ioc->ioc_regs.hfn_mbox_cmd);
+}
+
+static void
+bfa_ioc_send_enable(struct bfa_ioc_s *ioc)
+{
+ struct bfi_ioc_ctrl_req_s enable_req;
+
+ bfi_h2i_set(enable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_ENABLE_REQ,
+ bfa_ioc_portid(ioc));
+ enable_req.ioc_class = ioc->ioc_mc;
+ bfa_ioc_mbox_send(ioc, &enable_req, sizeof(struct bfi_ioc_ctrl_req_s));
+}
+
+static void
+bfa_ioc_send_disable(struct bfa_ioc_s *ioc)
+{
+ struct bfi_ioc_ctrl_req_s disable_req;
+
+ bfi_h2i_set(disable_req.mh, BFI_MC_IOC, BFI_IOC_H2I_DISABLE_REQ,
+ bfa_ioc_portid(ioc));
+ bfa_ioc_mbox_send(ioc, &disable_req, sizeof(struct bfi_ioc_ctrl_req_s));
+}
+
+static void
+bfa_ioc_send_getattr(struct bfa_ioc_s *ioc)
+{
+ struct bfi_ioc_getattr_req_s attr_req;
+
+ bfi_h2i_set(attr_req.mh, BFI_MC_IOC, BFI_IOC_H2I_GETATTR_REQ,
+ bfa_ioc_portid(ioc));
+ bfa_dma_be_addr_set(attr_req.attr_addr, ioc->attr_dma.pa);
+ bfa_ioc_mbox_send(ioc, &attr_req, sizeof(attr_req));
+}
+
+static void
+bfa_ioc_hb_check(void *cbarg)
+{
+ struct bfa_ioc_s *ioc = cbarg;
+ u32 hb_count;
+
+ hb_count = bfa_reg_read(ioc->ioc_regs.heartbeat);
+ if (ioc->hb_count == hb_count) {
+ ioc->hb_fail++;
+ } else {
+ ioc->hb_count = hb_count;
+ ioc->hb_fail = 0;
+ }
+
+ if (ioc->hb_fail >= BFA_IOC_HB_FAIL_MAX) {
+ bfa_log(ioc->logm, BFA_LOG_HAL_HEARTBEAT_FAILURE, hb_count);
+ ioc->hb_fail = 0;
+ bfa_ioc_recover(ioc);
+ return;
+ }
+
+ bfa_ioc_mbox_poll(ioc);
+ bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer, bfa_ioc_hb_check, ioc,
+ BFA_IOC_HB_TOV);
+}
+
+static void
+bfa_ioc_hb_monitor(struct bfa_ioc_s *ioc)
+{
+ ioc->hb_fail = 0;
+ ioc->hb_count = bfa_reg_read(ioc->ioc_regs.heartbeat);
+ bfa_timer_begin(ioc->timer_mod, &ioc->ioc_timer, bfa_ioc_hb_check, ioc,
+ BFA_IOC_HB_TOV);
+}
+
+static void
+bfa_ioc_hb_stop(struct bfa_ioc_s *ioc)
+{
+ bfa_timer_stop(&ioc->ioc_timer);
+}
+
+/**
+ * Host to LPU mailbox message addresses
+ */
+static struct {
+ u32 hfn_mbox, lpu_mbox, hfn_pgn;
+} iocreg_fnreg[] = {
+ {
+ HOSTFN0_LPU_MBOX0_0, LPU_HOSTFN0_MBOX0_0, HOST_PAGE_NUM_FN0}, {
+ HOSTFN1_LPU_MBOX0_8, LPU_HOSTFN1_MBOX0_8, HOST_PAGE_NUM_FN1}, {
+ HOSTFN2_LPU_MBOX0_0, LPU_HOSTFN2_MBOX0_0, HOST_PAGE_NUM_FN2}, {
+ HOSTFN3_LPU_MBOX0_8, LPU_HOSTFN3_MBOX0_8, HOST_PAGE_NUM_FN3}
+};
+
+/**
+ * Host <-> LPU mailbox command/status registers - port 0
+ */
+static struct {
+ u32 hfn, lpu;
+} iocreg_mbcmd_p0[] = {
+ {
+ HOSTFN0_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN0_MBOX0_CMD_STAT}, {
+ HOSTFN1_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN1_MBOX0_CMD_STAT}, {
+ HOSTFN2_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN2_MBOX0_CMD_STAT}, {
+ HOSTFN3_LPU0_MBOX0_CMD_STAT, LPU0_HOSTFN3_MBOX0_CMD_STAT}
+};
+
+/**
+ * Host <-> LPU mailbox command/status registers - port 1
+ */
+static struct {
+ u32 hfn, lpu;
+} iocreg_mbcmd_p1[] = {
+ {
+ HOSTFN0_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN0_MBOX0_CMD_STAT}, {
+ HOSTFN1_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN1_MBOX0_CMD_STAT}, {
+ HOSTFN2_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN2_MBOX0_CMD_STAT}, {
+ HOSTFN3_LPU1_MBOX0_CMD_STAT, LPU1_HOSTFN3_MBOX0_CMD_STAT}
+};
+
+/**
+ * Shared IRQ handling in INTX mode
+ */
+static struct {
+ u32 isr, msk;
+} iocreg_shirq_next[] = {
+ {
+ HOSTFN1_INT_STATUS, HOSTFN1_INT_MSK}, {
+ HOSTFN2_INT_STATUS, HOSTFN2_INT_MSK}, {
+ HOSTFN3_INT_STATUS, HOSTFN3_INT_MSK}, {
+HOSTFN0_INT_STATUS, HOSTFN0_INT_MSK},};
+
+static void
+bfa_ioc_reg_init(struct bfa_ioc_s *ioc)
+{
+ bfa_os_addr_t rb;
+ int pcifn = bfa_ioc_pcifn(ioc);
+
+ rb = bfa_ioc_bar0(ioc);
+
+ ioc->ioc_regs.hfn_mbox = rb + iocreg_fnreg[pcifn].hfn_mbox;
+ ioc->ioc_regs.lpu_mbox = rb + iocreg_fnreg[pcifn].lpu_mbox;
+ ioc->ioc_regs.host_page_num_fn = rb + iocreg_fnreg[pcifn].hfn_pgn;
+
+ if (ioc->port_id == 0) {
+ ioc->ioc_regs.heartbeat = rb + BFA_IOC0_HBEAT_REG;
+ ioc->ioc_regs.ioc_fwstate = rb + BFA_IOC0_STATE_REG;
+ ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].hfn;
+ ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p0[pcifn].lpu;
+ ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P0;
+ } else {
+ ioc->ioc_regs.heartbeat = (rb + BFA_IOC1_HBEAT_REG);
+ ioc->ioc_regs.ioc_fwstate = (rb + BFA_IOC1_STATE_REG);
+ ioc->ioc_regs.hfn_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].hfn;
+ ioc->ioc_regs.lpu_mbox_cmd = rb + iocreg_mbcmd_p1[pcifn].lpu;
+ ioc->ioc_regs.ll_halt = rb + FW_INIT_HALT_P1;
+ }
+
+ /**
+ * Shared IRQ handling in INTX mode
+ */
+ ioc->ioc_regs.shirq_isr_next = rb + iocreg_shirq_next[pcifn].isr;
+ ioc->ioc_regs.shirq_msk_next = rb + iocreg_shirq_next[pcifn].msk;
+
+ /*
+ * PSS control registers
+ */
+ ioc->ioc_regs.pss_ctl_reg = (rb + PSS_CTL_REG);
+ ioc->ioc_regs.app_pll_fast_ctl_reg = (rb + APP_PLL_425_CTL_REG);
+ ioc->ioc_regs.app_pll_slow_ctl_reg = (rb + APP_PLL_312_CTL_REG);
+
+ /*
+ * IOC semaphore registers and serialization
+ */
+ ioc->ioc_regs.ioc_sem_reg = (rb + HOST_SEM0_REG);
+ ioc->ioc_regs.ioc_usage_sem_reg = (rb + HOST_SEM1_REG);
+ ioc->ioc_regs.ioc_usage_reg = (rb + BFA_FW_USE_COUNT);
+
+ /**
+ * sram memory access
+ */
+ ioc->ioc_regs.smem_page_start = (rb + PSS_SMEM_PAGE_START);
+ ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CB;
+ if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT)
+ ioc->ioc_regs.smem_pg0 = BFI_IOC_SMEM_PG0_CT;
+}
+
+/**
+ * Initiate a full firmware download.
+ */
+static void
+bfa_ioc_download_fw(struct bfa_ioc_s *ioc, u32 boot_type,
+ u32 boot_param)
+{
+ u32 *fwimg;
+ u32 pgnum, pgoff;
+ u32 loff = 0;
+ u32 chunkno = 0;
+ u32 i;
+
+ /**
+ * Initialize LMEM first before code download
+ */
+ bfa_ioc_lmem_init(ioc);
+
+ /**
+ * Flash based firmware boot
+ */
+ bfa_trc(ioc, bfa_ioc_fwimg_get_size(ioc));
+ if (bfa_ioc_fwimg_get_size(ioc) < BFA_IOC_FWIMG_MINSZ)
+ boot_type = BFI_BOOT_TYPE_FLASH;
+ fwimg = bfa_ioc_fwimg_get_chunk(ioc, chunkno);
+ fwimg[BFI_BOOT_TYPE_OFF / sizeof(u32)] = bfa_os_swap32(boot_type);
+ fwimg[BFI_BOOT_PARAM_OFF / sizeof(u32)] =
+ bfa_os_swap32(boot_param);
+
+ pgnum = bfa_ioc_smem_pgnum(ioc, loff);
+ pgoff = bfa_ioc_smem_pgoff(ioc, loff);
+
+ bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+
+ for (i = 0; i < bfa_ioc_fwimg_get_size(ioc); i++) {
+
+ if (BFA_FLASH_CHUNK_NO(i) != chunkno) {
+ chunkno = BFA_FLASH_CHUNK_NO(i);
+ fwimg = bfa_ioc_fwimg_get_chunk(ioc,
+ BFA_FLASH_CHUNK_ADDR(chunkno));
+ }
+
+ /**
+ * write smem
+ */
+ bfa_mem_write(ioc->ioc_regs.smem_page_start, loff,
+ fwimg[BFA_FLASH_OFFSET_IN_CHUNK(i)]);
+
+ loff += sizeof(u32);
+
+ /**
+ * handle page offset wrap around
+ */
+ loff = PSS_SMEM_PGOFF(loff);
+ if (loff == 0) {
+ pgnum++;
+ bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+ }
+ }
+
+ bfa_reg_write(ioc->ioc_regs.host_page_num_fn,
+ bfa_ioc_smem_pgnum(ioc, 0));
+}
+
+static void
+bfa_ioc_reset(struct bfa_ioc_s *ioc, bfa_boolean_t force)
+{
+ bfa_ioc_hwinit(ioc, force);
+}
+
+/**
+ * Update BFA configuration from firmware configuration.
+ */
+static void
+bfa_ioc_getattr_reply(struct bfa_ioc_s *ioc)
+{
+ struct bfi_ioc_attr_s *attr = ioc->attr;
+
+ attr->adapter_prop = bfa_os_ntohl(attr->adapter_prop);
+ attr->maxfrsize = bfa_os_ntohs(attr->maxfrsize);
+
+ bfa_fsm_send_event(ioc, IOC_E_FWRSP_GETATTR);
+}
+
+/**
+ * Attach time initialization of mbox logic.
+ */
+static void
+bfa_ioc_mbox_attach(struct bfa_ioc_s *ioc)
+{
+ struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+ int mc;
+
+ INIT_LIST_HEAD(&mod->cmd_q);
+ for (mc = 0; mc < BFI_MC_MAX; mc++) {
+ mod->mbhdlr[mc].cbfn = NULL;
+ mod->mbhdlr[mc].cbarg = ioc->bfa;
+ }
+}
+
+/**
+ * Mbox poll timer -- restarts any pending mailbox requests.
+ */
+static void
+bfa_ioc_mbox_poll(struct bfa_ioc_s *ioc)
+{
+ struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+ struct bfa_mbox_cmd_s *cmd;
+ u32 stat;
+
+ /**
+ * If no command pending, do nothing
+ */
+ if (list_empty(&mod->cmd_q))
+ return;
+
+ /**
+ * If previous command is not yet fetched by firmware, do nothing
+ */
+ stat = bfa_reg_read(ioc->ioc_regs.hfn_mbox_cmd);
+ if (stat)
+ return;
+
+ /**
+ * Enqueue command to firmware.
+ */
+ bfa_q_deq(&mod->cmd_q, &cmd);
+ bfa_ioc_mbox_send(ioc, cmd->msg, sizeof(cmd->msg));
+}
+
+/**
+ * Cleanup any pending requests.
+ */
+static void
+bfa_ioc_mbox_hbfail(struct bfa_ioc_s *ioc)
+{
+ struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+ struct bfa_mbox_cmd_s *cmd;
+
+ while (!list_empty(&mod->cmd_q))
+ bfa_q_deq(&mod->cmd_q, &cmd);
+}
+
+/**
+ * Initialize IOC to port mapping.
+ */
+
+#define FNC_PERS_FN_SHIFT(__fn) ((__fn) * 8)
+static void
+bfa_ioc_map_port(struct bfa_ioc_s *ioc)
+{
+ bfa_os_addr_t rb = ioc->pcidev.pci_bar_kva;
+ u32 r32;
+
+ /**
+ * For crossbow, port id is same as pci function.
+ */
+ if (ioc->pcidev.device_id != BFA_PCI_DEVICE_ID_CT) {
+ ioc->port_id = bfa_ioc_pcifn(ioc);
+ return;
+ }
+
+ /**
+ * For catapult, base port id on personality register and IOC type
+ */
+ r32 = bfa_reg_read(rb + FNC_PERS_REG);
+ r32 >>= FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc));
+ ioc->port_id = (r32 & __F0_PORT_MAP_MK) >> __F0_PORT_MAP_SH;
+
+ bfa_trc(ioc, bfa_ioc_pcifn(ioc));
+ bfa_trc(ioc, ioc->port_id);
+}
+
+
+
+/**
+ * bfa_ioc_public
+ */
+
+/**
+* Set interrupt mode for a function: INTX or MSIX
+ */
+void
+bfa_ioc_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t msix)
+{
+ bfa_os_addr_t rb = ioc->pcidev.pci_bar_kva;
+ u32 r32, mode;
+
+ r32 = bfa_reg_read(rb + FNC_PERS_REG);
+ bfa_trc(ioc, r32);
+
+ mode = (r32 >> FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc))) &
+ __F0_INTX_STATUS;
+
+ /**
+ * If already in desired mode, do not change anything
+ */
+ if (!msix && mode)
+ return;
+
+ if (msix)
+ mode = __F0_INTX_STATUS_MSIX;
+ else
+ mode = __F0_INTX_STATUS_INTA;
+
+ r32 &= ~(__F0_INTX_STATUS << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
+ r32 |= (mode << FNC_PERS_FN_SHIFT(bfa_ioc_pcifn(ioc)));
+ bfa_trc(ioc, r32);
+
+ bfa_reg_write(rb + FNC_PERS_REG, r32);
+}
+
+bfa_status_t
+bfa_ioc_pll_init(struct bfa_ioc_s *ioc)
+{
+ bfa_os_addr_t rb = ioc->pcidev.pci_bar_kva;
+ u32 pll_sclk, pll_fclk, r32;
+
+ if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
+ pll_sclk =
+ __APP_PLL_312_ENABLE | __APP_PLL_312_LRESETN |
+ __APP_PLL_312_RSEL200500 | __APP_PLL_312_P0_1(0U) |
+ __APP_PLL_312_JITLMT0_1(3U) |
+ __APP_PLL_312_CNTLMT0_1(1U);
+ pll_fclk =
+ __APP_PLL_425_ENABLE | __APP_PLL_425_LRESETN |
+ __APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(0U) |
+ __APP_PLL_425_JITLMT0_1(3U) |
+ __APP_PLL_425_CNTLMT0_1(1U);
+
+ /**
+ * For catapult, choose operational mode FC/FCoE
+ */
+ if (ioc->fcmode) {
+ bfa_reg_write((rb + OP_MODE), 0);
+ bfa_reg_write((rb + ETH_MAC_SER_REG),
+ __APP_EMS_CMLCKSEL | __APP_EMS_REFCKBUFEN2
+ | __APP_EMS_CHANNEL_SEL);
+ } else {
+ ioc->pllinit = BFA_TRUE;
+ bfa_reg_write((rb + OP_MODE), __GLOBAL_FCOE_MODE);
+ bfa_reg_write((rb + ETH_MAC_SER_REG),
+ __APP_EMS_REFCKBUFEN1);
+ }
+ } else {
+ pll_sclk =
+ __APP_PLL_312_ENABLE | __APP_PLL_312_LRESETN |
+ __APP_PLL_312_P0_1(3U) | __APP_PLL_312_JITLMT0_1(3U) |
+ __APP_PLL_312_CNTLMT0_1(3U);
+ pll_fclk =
+ __APP_PLL_425_ENABLE | __APP_PLL_425_LRESETN |
+ __APP_PLL_425_RSEL200500 | __APP_PLL_425_P0_1(3U) |
+ __APP_PLL_425_JITLMT0_1(3U) |
+ __APP_PLL_425_CNTLMT0_1(3U);
+ }
+
+ bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_UNINIT);
+ bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_UNINIT);
+
+ bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
+ bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
+ bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
+ bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
+ bfa_reg_write((rb + HOSTFN0_INT_MSK), 0xffffffffU);
+ bfa_reg_write((rb + HOSTFN1_INT_MSK), 0xffffffffU);
+
+ bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+ __APP_PLL_312_LOGIC_SOFT_RESET);
+ bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+ __APP_PLL_312_BYPASS | __APP_PLL_312_LOGIC_SOFT_RESET);
+ bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+ __APP_PLL_425_LOGIC_SOFT_RESET);
+ bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+ __APP_PLL_425_BYPASS | __APP_PLL_425_LOGIC_SOFT_RESET);
+ bfa_os_udelay(2);
+ bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+ __APP_PLL_312_LOGIC_SOFT_RESET);
+ bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+ __APP_PLL_425_LOGIC_SOFT_RESET);
+
+ bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg,
+ pll_sclk | __APP_PLL_312_LOGIC_SOFT_RESET);
+ bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg,
+ pll_fclk | __APP_PLL_425_LOGIC_SOFT_RESET);
+
+ /**
+ * Wait for PLLs to lock.
+ */
+ bfa_os_udelay(2000);
+ bfa_reg_write((rb + HOSTFN0_INT_STATUS), 0xffffffffU);
+ bfa_reg_write((rb + HOSTFN1_INT_STATUS), 0xffffffffU);
+
+ bfa_reg_write(ioc->ioc_regs.app_pll_slow_ctl_reg, pll_sclk);
+ bfa_reg_write(ioc->ioc_regs.app_pll_fast_ctl_reg, pll_fclk);
+
+ if (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT) {
+ bfa_reg_write((rb + MBIST_CTL_REG), __EDRAM_BISTR_START);
+ bfa_os_udelay(1000);
+ r32 = bfa_reg_read((rb + MBIST_STAT_REG));
+ bfa_trc(ioc, r32);
+ }
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Interface used by diag module to do firmware boot with memory test
+ * as the entry vector.
+ */
+void
+bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type, u32 boot_param)
+{
+ bfa_os_addr_t rb;
+
+ bfa_ioc_stats(ioc, ioc_boots);
+
+ if (bfa_ioc_pll_init(ioc) != BFA_STATUS_OK)
+ return;
+
+ /**
+ * Initialize IOC state of all functions on a chip reset.
+ */
+ rb = ioc->pcidev.pci_bar_kva;
+ if (boot_param == BFI_BOOT_TYPE_MEMTEST) {
+ bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_MEMTEST);
+ bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_MEMTEST);
+ } else {
+ bfa_reg_write((rb + BFA_IOC0_STATE_REG), BFI_IOC_INITING);
+ bfa_reg_write((rb + BFA_IOC1_STATE_REG), BFI_IOC_INITING);
+ }
+
+ bfa_ioc_download_fw(ioc, boot_type, boot_param);
+
+ /**
+ * Enable interrupts just before starting LPU
+ */
+ ioc->cbfn->reset_cbfn(ioc->bfa);
+ bfa_ioc_lpu_start(ioc);
+}
+
+/**
+ * Enable/disable IOC failure auto recovery.
+ */
+void
+bfa_ioc_auto_recover(bfa_boolean_t auto_recover)
+{
+ bfa_auto_recover = BFA_FALSE;
+}
+
+
+bfa_boolean_t
+bfa_ioc_is_operational(struct bfa_ioc_s *ioc)
+{
+ return bfa_fsm_cmp_state(ioc, bfa_ioc_sm_op);
+}
+
+void
+bfa_ioc_msgget(struct bfa_ioc_s *ioc, void *mbmsg)
+{
+ u32 *msgp = mbmsg;
+ u32 r32;
+ int i;
+
+ /**
+ * read the MBOX msg
+ */
+ for (i = 0; i < (sizeof(union bfi_ioc_i2h_msg_u) / sizeof(u32));
+ i++) {
+ r32 = bfa_reg_read(ioc->ioc_regs.lpu_mbox +
+ i * sizeof(u32));
+ msgp[i] = bfa_os_htonl(r32);
+ }
+
+ /**
+ * turn off mailbox interrupt by clearing mailbox status
+ */
+ bfa_reg_write(ioc->ioc_regs.lpu_mbox_cmd, 1);
+ bfa_reg_read(ioc->ioc_regs.lpu_mbox_cmd);
+}
+
+void
+bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *m)
+{
+ union bfi_ioc_i2h_msg_u *msg;
+
+ msg = (union bfi_ioc_i2h_msg_u *)m;
+
+ bfa_ioc_stats(ioc, ioc_isrs);
+
+ switch (msg->mh.msg_id) {
+ case BFI_IOC_I2H_HBEAT:
+ break;
+
+ case BFI_IOC_I2H_READY_EVENT:
+ bfa_fsm_send_event(ioc, IOC_E_FWREADY);
+ break;
+
+ case BFI_IOC_I2H_ENABLE_REPLY:
+ bfa_fsm_send_event(ioc, IOC_E_FWRSP_ENABLE);
+ break;
+
+ case BFI_IOC_I2H_DISABLE_REPLY:
+ bfa_fsm_send_event(ioc, IOC_E_FWRSP_DISABLE);
+ break;
+
+ case BFI_IOC_I2H_GETATTR_REPLY:
+ bfa_ioc_getattr_reply(ioc);
+ break;
+
+ default:
+ bfa_trc(ioc, msg->mh.msg_id);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IOC attach time initialization and setup.
+ *
+ * @param[in] ioc memory for IOC
+ * @param[in] bfa driver instance structure
+ * @param[in] trcmod kernel trace module
+ * @param[in] aen kernel aen event module
+ * @param[in] logm kernel logging module
+ */
+void
+bfa_ioc_attach(struct bfa_ioc_s *ioc, void *bfa, struct bfa_ioc_cbfn_s *cbfn,
+ struct bfa_timer_mod_s *timer_mod, struct bfa_trc_mod_s *trcmod,
+ struct bfa_aen_s *aen, struct bfa_log_mod_s *logm)
+{
+ ioc->bfa = bfa;
+ ioc->cbfn = cbfn;
+ ioc->timer_mod = timer_mod;
+ ioc->trcmod = trcmod;
+ ioc->aen = aen;
+ ioc->logm = logm;
+ ioc->fcmode = BFA_FALSE;
+ ioc->pllinit = BFA_FALSE;
+ ioc->dbg_fwsave_once = BFA_TRUE;
+
+ bfa_ioc_mbox_attach(ioc);
+ INIT_LIST_HEAD(&ioc->hb_notify_q);
+
+ bfa_fsm_set_state(ioc, bfa_ioc_sm_reset);
+}
+
+/**
+ * Driver detach time IOC cleanup.
+ */
+void
+bfa_ioc_detach(struct bfa_ioc_s *ioc)
+{
+ bfa_fsm_send_event(ioc, IOC_E_DETACH);
+}
+
+/**
+ * Setup IOC PCI properties.
+ *
+ * @param[in] pcidev PCI device information for this IOC
+ */
+void
+bfa_ioc_pci_init(struct bfa_ioc_s *ioc, struct bfa_pcidev_s *pcidev,
+ enum bfi_mclass mc)
+{
+ ioc->ioc_mc = mc;
+ ioc->pcidev = *pcidev;
+ ioc->ctdev = (ioc->pcidev.device_id == BFA_PCI_DEVICE_ID_CT);
+ ioc->cna = ioc->ctdev && !ioc->fcmode;
+
+ bfa_ioc_map_port(ioc);
+ bfa_ioc_reg_init(ioc);
+}
+
+/**
+ * Initialize IOC dma memory
+ *
+ * @param[in] dm_kva kernel virtual address of IOC dma memory
+ * @param[in] dm_pa physical address of IOC dma memory
+ */
+void
+bfa_ioc_mem_claim(struct bfa_ioc_s *ioc, u8 *dm_kva, u64 dm_pa)
+{
+ /**
+ * dma memory for firmware attribute
+ */
+ ioc->attr_dma.kva = dm_kva;
+ ioc->attr_dma.pa = dm_pa;
+ ioc->attr = (struct bfi_ioc_attr_s *)dm_kva;
+}
+
+/**
+ * Return size of dma memory required.
+ */
+u32
+bfa_ioc_meminfo(void)
+{
+ return BFA_ROUNDUP(sizeof(struct bfi_ioc_attr_s), BFA_DMA_ALIGN_SZ);
+}
+
+void
+bfa_ioc_enable(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_stats(ioc, ioc_enables);
+ ioc->dbg_fwsave_once = BFA_TRUE;
+
+ bfa_fsm_send_event(ioc, IOC_E_ENABLE);
+}
+
+void
+bfa_ioc_disable(struct bfa_ioc_s *ioc)
+{
+ bfa_ioc_stats(ioc, ioc_disables);
+ bfa_fsm_send_event(ioc, IOC_E_DISABLE);
+}
+
+/**
+ * Returns memory required for saving firmware trace in case of crash.
+ * Driver must call this interface to allocate memory required for
+ * automatic saving of firmware trace. Driver should call
+ * bfa_ioc_debug_memclaim() right after bfa_ioc_attach() to setup this
+ * trace memory.
+ */
+int
+bfa_ioc_debug_trcsz(bfa_boolean_t auto_recover)
+{
+return (auto_recover) ? BFA_DBG_FWTRC_LEN : 0;
+}
+
+/**
+ * Initialize memory for saving firmware trace. Driver must initialize
+ * trace memory before call bfa_ioc_enable().
+ */
+void
+bfa_ioc_debug_memclaim(struct bfa_ioc_s *ioc, void *dbg_fwsave)
+{
+ bfa_assert(ioc->auto_recover);
+ ioc->dbg_fwsave = dbg_fwsave;
+ ioc->dbg_fwsave_len = bfa_ioc_debug_trcsz(ioc->auto_recover);
+}
+
+u32
+bfa_ioc_smem_pgnum(struct bfa_ioc_s *ioc, u32 fmaddr)
+{
+ return PSS_SMEM_PGNUM(ioc->ioc_regs.smem_pg0, fmaddr);
+}
+
+u32
+bfa_ioc_smem_pgoff(struct bfa_ioc_s *ioc, u32 fmaddr)
+{
+ return PSS_SMEM_PGOFF(fmaddr);
+}
+
+/**
+ * Register mailbox message handler functions
+ *
+ * @param[in] ioc IOC instance
+ * @param[in] mcfuncs message class handler functions
+ */
+void
+bfa_ioc_mbox_register(struct bfa_ioc_s *ioc, bfa_ioc_mbox_mcfunc_t *mcfuncs)
+{
+ struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+ int mc;
+
+ for (mc = 0; mc < BFI_MC_MAX; mc++)
+ mod->mbhdlr[mc].cbfn = mcfuncs[mc];
+}
+
+/**
+ * Register mailbox message handler function, to be called by common modules
+ */
+void
+bfa_ioc_mbox_regisr(struct bfa_ioc_s *ioc, enum bfi_mclass mc,
+ bfa_ioc_mbox_mcfunc_t cbfn, void *cbarg)
+{
+ struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+
+ mod->mbhdlr[mc].cbfn = cbfn;
+ mod->mbhdlr[mc].cbarg = cbarg;
+}
+
+/**
+ * Queue a mailbox command request to firmware. Waits if mailbox is busy.
+ * Responsibility of caller to serialize
+ *
+ * @param[in] ioc IOC instance
+ * @param[i] cmd Mailbox command
+ */
+void
+bfa_ioc_mbox_queue(struct bfa_ioc_s *ioc, struct bfa_mbox_cmd_s *cmd)
+{
+ struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+ u32 stat;
+
+ /**
+ * If a previous command is pending, queue new command
+ */
+ if (!list_empty(&mod->cmd_q)) {
+ list_add_tail(&cmd->qe, &mod->cmd_q);
+ return;
+ }
+
+ /**
+ * If mailbox is busy, queue command for poll timer
+ */
+ stat = bfa_reg_read(ioc->ioc_regs.hfn_mbox_cmd);
+ if (stat) {
+ list_add_tail(&cmd->qe, &mod->cmd_q);
+ return;
+ }
+
+ /**
+ * mailbox is free -- queue command to firmware
+ */
+ bfa_ioc_mbox_send(ioc, cmd->msg, sizeof(cmd->msg));
+}
+
+/**
+ * Handle mailbox interrupts
+ */
+void
+bfa_ioc_mbox_isr(struct bfa_ioc_s *ioc)
+{
+ struct bfa_ioc_mbox_mod_s *mod = &ioc->mbox_mod;
+ struct bfi_mbmsg_s m;
+ int mc;
+
+ bfa_ioc_msgget(ioc, &m);
+
+ /**
+ * Treat IOC message class as special.
+ */
+ mc = m.mh.msg_class;
+ if (mc == BFI_MC_IOC) {
+ bfa_ioc_isr(ioc, &m);
+ return;
+ }
+
+ if ((mc > BFI_MC_MAX) || (mod->mbhdlr[mc].cbfn == NULL))
+ return;
+
+ mod->mbhdlr[mc].cbfn(mod->mbhdlr[mc].cbarg, &m);
+}
+
+void
+bfa_ioc_error_isr(struct bfa_ioc_s *ioc)
+{
+ bfa_fsm_send_event(ioc, IOC_E_HWERROR);
+}
+
+#ifndef BFA_BIOS_BUILD
+
+/**
+ * return true if IOC is disabled
+ */
+bfa_boolean_t
+bfa_ioc_is_disabled(struct bfa_ioc_s *ioc)
+{
+ return (bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabling)
+ || bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabled));
+}
+
+/**
+ * return true if IOC firmware is different.
+ */
+bfa_boolean_t
+bfa_ioc_fw_mismatch(struct bfa_ioc_s *ioc)
+{
+ return (bfa_fsm_cmp_state(ioc, bfa_ioc_sm_reset)
+ || bfa_fsm_cmp_state(ioc, bfa_ioc_sm_fwcheck)
+ || bfa_fsm_cmp_state(ioc, bfa_ioc_sm_mismatch));
+}
+
+#define bfa_ioc_state_disabled(__sm) \
+ (((__sm) == BFI_IOC_UNINIT) || \
+ ((__sm) == BFI_IOC_INITING) || \
+ ((__sm) == BFI_IOC_HWINIT) || \
+ ((__sm) == BFI_IOC_DISABLED) || \
+ ((__sm) == BFI_IOC_HBFAIL) || \
+ ((__sm) == BFI_IOC_CFG_DISABLED))
+
+/**
+ * Check if adapter is disabled -- both IOCs should be in a disabled
+ * state.
+ */
+bfa_boolean_t
+bfa_ioc_adapter_is_disabled(struct bfa_ioc_s *ioc)
+{
+ u32 ioc_state;
+ bfa_os_addr_t rb = ioc->pcidev.pci_bar_kva;
+
+ if (!bfa_fsm_cmp_state(ioc, bfa_ioc_sm_disabled))
+ return BFA_FALSE;
+
+ ioc_state = bfa_reg_read(rb + BFA_IOC0_STATE_REG);
+ if (!bfa_ioc_state_disabled(ioc_state))
+ return BFA_FALSE;
+
+ ioc_state = bfa_reg_read(rb + BFA_IOC1_STATE_REG);
+ if (!bfa_ioc_state_disabled(ioc_state))
+ return BFA_FALSE;
+
+ return BFA_TRUE;
+}
+
+/**
+ * Add to IOC heartbeat failure notification queue. To be used by common
+ * modules such as
+ */
+void
+bfa_ioc_hbfail_register(struct bfa_ioc_s *ioc,
+ struct bfa_ioc_hbfail_notify_s *notify)
+{
+ list_add_tail(¬ify->qe, &ioc->hb_notify_q);
+}
+
+#define BFA_MFG_NAME "Brocade"
+void
+bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
+ struct bfa_adapter_attr_s *ad_attr)
+{
+ struct bfi_ioc_attr_s *ioc_attr;
+ char model[BFA_ADAPTER_MODEL_NAME_LEN];
+
+ ioc_attr = ioc->attr;
+ bfa_os_memcpy((void *)&ad_attr->serial_num,
+ (void *)ioc_attr->brcd_serialnum,
+ BFA_ADAPTER_SERIAL_NUM_LEN);
+
+ bfa_os_memcpy(&ad_attr->fw_ver, ioc_attr->fw_version, BFA_VERSION_LEN);
+ bfa_os_memcpy(&ad_attr->optrom_ver, ioc_attr->optrom_version,
+ BFA_VERSION_LEN);
+ bfa_os_memcpy(&ad_attr->manufacturer, BFA_MFG_NAME,
+ BFA_ADAPTER_MFG_NAME_LEN);
+ bfa_os_memcpy(&ad_attr->vpd, &ioc_attr->vpd,
+ sizeof(struct bfa_mfg_vpd_s));
+
+ ad_attr->nports = BFI_ADAPTER_GETP(NPORTS, ioc_attr->adapter_prop);
+ ad_attr->max_speed = BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop);
+
+ /**
+ * model name
+ */
+ if (BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop) == 10) {
+ strcpy(model, "BR-10?0");
+ model[5] = '0' + ad_attr->nports;
+ } else {
+ strcpy(model, "Brocade-??5");
+ model[8] =
+ '0' + BFI_ADAPTER_GETP(SPEED, ioc_attr->adapter_prop);
+ model[9] = '0' + ad_attr->nports;
+ }
+
+ if (BFI_ADAPTER_IS_SPECIAL(ioc_attr->adapter_prop))
+ ad_attr->prototype = 1;
+ else
+ ad_attr->prototype = 0;
+
+ bfa_os_memcpy(&ad_attr->model, model, BFA_ADAPTER_MODEL_NAME_LEN);
+ bfa_os_memcpy(&ad_attr->model_descr, &ad_attr->model,
+ BFA_ADAPTER_MODEL_NAME_LEN);
+
+ ad_attr->pwwn = bfa_ioc_get_pwwn(ioc);
+ ad_attr->mac = bfa_ioc_get_mac(ioc);
+
+ ad_attr->pcie_gen = ioc_attr->pcie_gen;
+ ad_attr->pcie_lanes = ioc_attr->pcie_lanes;
+ ad_attr->pcie_lanes_orig = ioc_attr->pcie_lanes_orig;
+ ad_attr->asic_rev = ioc_attr->asic_rev;
+ ad_attr->hw_ver[0] = 'R';
+ ad_attr->hw_ver[1] = 'e';
+ ad_attr->hw_ver[2] = 'v';
+ ad_attr->hw_ver[3] = '-';
+ ad_attr->hw_ver[4] = ioc_attr->asic_rev;
+ ad_attr->hw_ver[5] = '\0';
+
+ ad_attr->cna_capable = ioc->cna;
+}
+
+void
+bfa_ioc_get_attr(struct bfa_ioc_s *ioc, struct bfa_ioc_attr_s *ioc_attr)
+{
+ bfa_os_memset((void *)ioc_attr, 0, sizeof(struct bfa_ioc_attr_s));
+
+ ioc_attr->state = bfa_sm_to_state(ioc_sm_table, ioc->fsm);
+ ioc_attr->port_id = ioc->port_id;
+
+ if (!ioc->ctdev)
+ ioc_attr->ioc_type = BFA_IOC_TYPE_FC;
+ else if (ioc->ioc_mc == BFI_MC_IOCFC)
+ ioc_attr->ioc_type = BFA_IOC_TYPE_FCoE;
+ else if (ioc->ioc_mc == BFI_MC_LL)
+ ioc_attr->ioc_type = BFA_IOC_TYPE_LL;
+
+ bfa_ioc_get_adapter_attr(ioc, &ioc_attr->adapter_attr);
+
+ ioc_attr->pci_attr.device_id = ioc->pcidev.device_id;
+ ioc_attr->pci_attr.pcifn = ioc->pcidev.pci_func;
+ ioc_attr->pci_attr.chip_rev[0] = 'R';
+ ioc_attr->pci_attr.chip_rev[1] = 'e';
+ ioc_attr->pci_attr.chip_rev[2] = 'v';
+ ioc_attr->pci_attr.chip_rev[3] = '-';
+ ioc_attr->pci_attr.chip_rev[4] = ioc_attr->adapter_attr.asic_rev;
+ ioc_attr->pci_attr.chip_rev[5] = '\0';
+}
+
+/**
+ * hal_wwn_public
+ */
+wwn_t
+bfa_ioc_get_pwwn(struct bfa_ioc_s *ioc)
+{
+ union {
+ wwn_t wwn;
+ u8 byte[sizeof(wwn_t)];
+ }
+ w;
+
+ w.wwn = ioc->attr->mfg_wwn;
+
+ if (bfa_ioc_portid(ioc) == 1)
+ w.byte[7]++;
+
+ return w.wwn;
+}
+
+wwn_t
+bfa_ioc_get_nwwn(struct bfa_ioc_s *ioc)
+{
+ union {
+ wwn_t wwn;
+ u8 byte[sizeof(wwn_t)];
+ }
+ w;
+
+ w.wwn = ioc->attr->mfg_wwn;
+
+ if (bfa_ioc_portid(ioc) == 1)
+ w.byte[7]++;
+
+ w.byte[0] = 0x20;
+
+ return w.wwn;
+}
+
+wwn_t
+bfa_ioc_get_wwn_naa5(struct bfa_ioc_s *ioc, u16 inst)
+{
+ union {
+ wwn_t wwn;
+ u8 byte[sizeof(wwn_t)];
+ }
+ w , w5;
+
+ bfa_trc(ioc, inst);
+
+ w.wwn = ioc->attr->mfg_wwn;
+ w5.byte[0] = 0x50 | w.byte[2] >> 4;
+ w5.byte[1] = w.byte[2] << 4 | w.byte[3] >> 4;
+ w5.byte[2] = w.byte[3] << 4 | w.byte[4] >> 4;
+ w5.byte[3] = w.byte[4] << 4 | w.byte[5] >> 4;
+ w5.byte[4] = w.byte[5] << 4 | w.byte[6] >> 4;
+ w5.byte[5] = w.byte[6] << 4 | w.byte[7] >> 4;
+ w5.byte[6] = w.byte[7] << 4 | (inst & 0x0f00) >> 8;
+ w5.byte[7] = (inst & 0xff);
+
+ return w5.wwn;
+}
+
+u64
+bfa_ioc_get_adid(struct bfa_ioc_s *ioc)
+{
+ return ioc->attr->mfg_wwn;
+}
+
+mac_t
+bfa_ioc_get_mac(struct bfa_ioc_s *ioc)
+{
+ mac_t mac;
+
+ mac = ioc->attr->mfg_mac;
+ mac.mac[MAC_ADDRLEN - 1] += bfa_ioc_pcifn(ioc);
+
+ return mac;
+}
+
+void
+bfa_ioc_set_fcmode(struct bfa_ioc_s *ioc)
+{
+ ioc->fcmode = BFA_TRUE;
+ ioc->port_id = bfa_ioc_pcifn(ioc);
+}
+
+bfa_boolean_t
+bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc)
+{
+ return ioc->fcmode || (ioc->pcidev.device_id != BFA_PCI_DEVICE_ID_CT);
+}
+
+/**
+ * Return true if interrupt should be claimed.
+ */
+bfa_boolean_t
+bfa_ioc_intx_claim(struct bfa_ioc_s *ioc)
+{
+ u32 isr, msk;
+
+ /**
+ * Always claim if not catapult.
+ */
+ if (!ioc->ctdev)
+ return BFA_TRUE;
+
+ /**
+ * FALSE if next device is claiming interrupt.
+ * TRUE if next device is not interrupting or not present.
+ */
+ msk = bfa_reg_read(ioc->ioc_regs.shirq_msk_next);
+ isr = bfa_reg_read(ioc->ioc_regs.shirq_isr_next);
+ return !(isr & ~msk);
+}
+
+/**
+ * Send AEN notification
+ */
+static void
+bfa_ioc_aen_post(struct bfa_ioc_s *ioc, enum bfa_ioc_aen_event event)
+{
+ union bfa_aen_data_u aen_data;
+ struct bfa_log_mod_s *logmod = ioc->logm;
+ s32 inst_num = 0;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ switch (event) {
+ case BFA_IOC_AEN_HBGOOD:
+ bfa_log(logmod, BFA_AEN_IOC_HBGOOD, inst_num);
+ break;
+ case BFA_IOC_AEN_HBFAIL:
+ bfa_log(logmod, BFA_AEN_IOC_HBFAIL, inst_num);
+ break;
+ case BFA_IOC_AEN_ENABLE:
+ bfa_log(logmod, BFA_AEN_IOC_ENABLE, inst_num);
+ break;
+ case BFA_IOC_AEN_DISABLE:
+ bfa_log(logmod, BFA_AEN_IOC_DISABLE, inst_num);
+ break;
+ case BFA_IOC_AEN_FWMISMATCH:
+ bfa_log(logmod, BFA_AEN_IOC_FWMISMATCH, inst_num);
+ break;
+ default:
+ break;
+ }
+
+ memset(&aen_data.ioc.pwwn, 0, sizeof(aen_data.ioc.pwwn));
+ memset(&aen_data.ioc.mac, 0, sizeof(aen_data.ioc.mac));
+ bfa_ioc_get_attr(ioc, &ioc_attr);
+ switch (ioc_attr.ioc_type) {
+ case BFA_IOC_TYPE_FC:
+ aen_data.ioc.pwwn = bfa_ioc_get_pwwn(ioc);
+ break;
+ case BFA_IOC_TYPE_FCoE:
+ aen_data.ioc.pwwn = bfa_ioc_get_pwwn(ioc);
+ aen_data.ioc.mac = bfa_ioc_get_mac(ioc);
+ break;
+ case BFA_IOC_TYPE_LL:
+ aen_data.ioc.mac = bfa_ioc_get_mac(ioc);
+ break;
+ default:
+ bfa_assert(ioc_attr.ioc_type == BFA_IOC_TYPE_FC);
+ break;
+ }
+ aen_data.ioc.ioc_type = ioc_attr.ioc_type;
+}
+
+/**
+ * Retrieve saved firmware trace from a prior IOC failure.
+ */
+bfa_status_t
+bfa_ioc_debug_fwsave(struct bfa_ioc_s *ioc, void *trcdata, int *trclen)
+{
+ int tlen;
+
+ if (ioc->dbg_fwsave_len == 0)
+ return BFA_STATUS_ENOFSAVE;
+
+ tlen = *trclen;
+ if (tlen > ioc->dbg_fwsave_len)
+ tlen = ioc->dbg_fwsave_len;
+
+ bfa_os_memcpy(trcdata, ioc->dbg_fwsave, tlen);
+ *trclen = tlen;
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Retrieve saved firmware trace from a prior IOC failure.
+ */
+bfa_status_t
+bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata, int *trclen)
+{
+ u32 pgnum;
+ u32 loff = BFA_DBG_FWTRC_OFF(bfa_ioc_portid(ioc));
+ int i, tlen;
+ u32 *tbuf = trcdata, r32;
+
+ bfa_trc(ioc, *trclen);
+
+ pgnum = bfa_ioc_smem_pgnum(ioc, loff);
+ loff = bfa_ioc_smem_pgoff(ioc, loff);
+ bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+
+ tlen = *trclen;
+ if (tlen > BFA_DBG_FWTRC_LEN)
+ tlen = BFA_DBG_FWTRC_LEN;
+ tlen /= sizeof(u32);
+
+ bfa_trc(ioc, tlen);
+
+ for (i = 0; i < tlen; i++) {
+ r32 = bfa_mem_read(ioc->ioc_regs.smem_page_start, loff);
+ tbuf[i] = bfa_os_ntohl(r32);
+ loff += sizeof(u32);
+
+ /**
+ * handle page offset wrap around
+ */
+ loff = PSS_SMEM_PGOFF(loff);
+ if (loff == 0) {
+ pgnum++;
+ bfa_reg_write(ioc->ioc_regs.host_page_num_fn, pgnum);
+ }
+ }
+ bfa_reg_write(ioc->ioc_regs.host_page_num_fn,
+ bfa_ioc_smem_pgnum(ioc, 0));
+ bfa_trc(ioc, pgnum);
+
+ *trclen = tlen * sizeof(u32);
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Save firmware trace if configured.
+ */
+static void
+bfa_ioc_debug_save(struct bfa_ioc_s *ioc)
+{
+ int tlen;
+
+ if (ioc->dbg_fwsave_len) {
+ tlen = ioc->dbg_fwsave_len;
+ bfa_ioc_debug_fwtrc(ioc, ioc->dbg_fwsave, &tlen);
+ }
+}
+
+/**
+ * Firmware failure detected. Start recovery actions.
+ */
+static void
+bfa_ioc_recover(struct bfa_ioc_s *ioc)
+{
+ if (ioc->dbg_fwsave_once) {
+ ioc->dbg_fwsave_once = BFA_FALSE;
+ bfa_ioc_debug_save(ioc);
+ }
+
+ bfa_ioc_stats(ioc, ioc_hbfails);
+ bfa_fsm_send_event(ioc, IOC_E_HBFAIL);
+}
+
+#else
+
+static void
+bfa_ioc_aen_post(struct bfa_ioc_s *ioc, enum bfa_ioc_aen_event event)
+{
+}
+
+static void
+bfa_ioc_recover(struct bfa_ioc_s *ioc)
+{
+ bfa_assert(0);
+}
+
+#endif
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_IOC_H__
+#define __BFA_IOC_H__
+
+#include <cs/bfa_sm.h>
+#include <bfi/bfi.h>
+#include <bfi/bfi_ioc.h>
+#include <bfi/bfi_boot.h>
+#include <bfa_timer.h>
+
+/**
+ * PCI device information required by IOC
+ */
+struct bfa_pcidev_s {
+ int pci_slot;
+ u8 pci_func;
+ u16 device_id;
+ bfa_os_addr_t pci_bar_kva;
+};
+
+/**
+ * Structure used to remember the DMA-able memory block's KVA and Physical
+ * Address
+ */
+struct bfa_dma_s {
+ void *kva; /*! Kernel virtual address */
+ u64 pa; /*! Physical address */
+};
+
+#define BFA_DMA_ALIGN_SZ 256
+#define BFA_ROUNDUP(_l, _s) (((_l) + ((_s) - 1)) & ~((_s) - 1))
+
+
+
+#define bfa_dma_addr_set(dma_addr, pa) \
+ __bfa_dma_addr_set(&dma_addr, (u64)pa)
+
+static inline void
+__bfa_dma_addr_set(union bfi_addr_u *dma_addr, u64 pa)
+{
+ dma_addr->a32.addr_lo = (u32) pa;
+ dma_addr->a32.addr_hi = (u32) (bfa_os_u32(pa));
+}
+
+
+#define bfa_dma_be_addr_set(dma_addr, pa) \
+ __bfa_dma_be_addr_set(&dma_addr, (u64)pa)
+static inline void
+__bfa_dma_be_addr_set(union bfi_addr_u *dma_addr, u64 pa)
+{
+ dma_addr->a32.addr_lo = (u32) bfa_os_htonl(pa);
+ dma_addr->a32.addr_hi = (u32) bfa_os_htonl(bfa_os_u32(pa));
+}
+
+struct bfa_ioc_regs_s {
+ bfa_os_addr_t hfn_mbox_cmd;
+ bfa_os_addr_t hfn_mbox;
+ bfa_os_addr_t lpu_mbox_cmd;
+ bfa_os_addr_t lpu_mbox;
+ bfa_os_addr_t pss_ctl_reg;
+ bfa_os_addr_t app_pll_fast_ctl_reg;
+ bfa_os_addr_t app_pll_slow_ctl_reg;
+ bfa_os_addr_t ioc_sem_reg;
+ bfa_os_addr_t ioc_usage_sem_reg;
+ bfa_os_addr_t ioc_usage_reg;
+ bfa_os_addr_t host_page_num_fn;
+ bfa_os_addr_t heartbeat;
+ bfa_os_addr_t ioc_fwstate;
+ bfa_os_addr_t ll_halt;
+ bfa_os_addr_t shirq_isr_next;
+ bfa_os_addr_t shirq_msk_next;
+ bfa_os_addr_t smem_page_start;
+ u32 smem_pg0;
+};
+
+#define bfa_reg_read(_raddr) bfa_os_reg_read(_raddr)
+#define bfa_reg_write(_raddr, _val) bfa_os_reg_write(_raddr, _val)
+#define bfa_mem_read(_raddr, _off) bfa_os_mem_read(_raddr, _off)
+#define bfa_mem_write(_raddr, _off, _val) \
+ bfa_os_mem_write(_raddr, _off, _val)
+/**
+ * IOC Mailbox structures
+ */
+struct bfa_mbox_cmd_s {
+ struct list_head qe;
+ u32 msg[BFI_IOC_MSGSZ];
+};
+
+/**
+ * IOC mailbox module
+ */
+typedef void (*bfa_ioc_mbox_mcfunc_t)(void *cbarg, struct bfi_mbmsg_s *m);
+struct bfa_ioc_mbox_mod_s {
+ struct list_head cmd_q; /* pending mbox queue */
+ int nmclass; /* number of handlers */
+ struct {
+ bfa_ioc_mbox_mcfunc_t cbfn; /* message handlers */
+ void *cbarg;
+ } mbhdlr[BFI_MC_MAX];
+};
+
+/**
+ * IOC callback function interfaces
+ */
+typedef void (*bfa_ioc_enable_cbfn_t)(void *bfa, enum bfa_status status);
+typedef void (*bfa_ioc_disable_cbfn_t)(void *bfa);
+typedef void (*bfa_ioc_hbfail_cbfn_t)(void *bfa);
+typedef void (*bfa_ioc_reset_cbfn_t)(void *bfa);
+struct bfa_ioc_cbfn_s {
+ bfa_ioc_enable_cbfn_t enable_cbfn;
+ bfa_ioc_disable_cbfn_t disable_cbfn;
+ bfa_ioc_hbfail_cbfn_t hbfail_cbfn;
+ bfa_ioc_reset_cbfn_t reset_cbfn;
+};
+
+/**
+ * Heartbeat failure notification queue element.
+ */
+struct bfa_ioc_hbfail_notify_s {
+ struct list_head qe;
+ bfa_ioc_hbfail_cbfn_t cbfn;
+ void *cbarg;
+};
+
+/**
+ * Initialize a heartbeat failure notification structure
+ */
+#define bfa_ioc_hbfail_init(__notify, __cbfn, __cbarg) do { \
+ (__notify)->cbfn = (__cbfn); \
+ (__notify)->cbarg = (__cbarg); \
+} while (0)
+
+struct bfa_ioc_s {
+ bfa_fsm_t fsm;
+ struct bfa_s *bfa;
+ struct bfa_pcidev_s pcidev;
+ struct bfa_timer_mod_s *timer_mod;
+ struct bfa_timer_s ioc_timer;
+ struct bfa_timer_s sem_timer;
+ u32 hb_count;
+ u32 hb_fail;
+ u32 retry_count;
+ struct list_head hb_notify_q;
+ void *dbg_fwsave;
+ int dbg_fwsave_len;
+ bfa_boolean_t dbg_fwsave_once;
+ enum bfi_mclass ioc_mc;
+ struct bfa_ioc_regs_s ioc_regs;
+ struct bfa_trc_mod_s *trcmod;
+ struct bfa_aen_s *aen;
+ struct bfa_log_mod_s *logm;
+ struct bfa_ioc_drv_stats_s stats;
+ bfa_boolean_t auto_recover;
+ bfa_boolean_t fcmode;
+ bfa_boolean_t ctdev;
+ bfa_boolean_t cna;
+ bfa_boolean_t pllinit;
+ u8 port_id;
+
+ struct bfa_dma_s attr_dma;
+ struct bfi_ioc_attr_s *attr;
+ struct bfa_ioc_cbfn_s *cbfn;
+ struct bfa_ioc_mbox_mod_s mbox_mod;
+};
+
+#define bfa_ioc_pcifn(__ioc) (__ioc)->pcidev.pci_func
+#define bfa_ioc_devid(__ioc) (__ioc)->pcidev.device_id
+#define bfa_ioc_bar0(__ioc) (__ioc)->pcidev.pci_bar_kva
+#define bfa_ioc_portid(__ioc) ((__ioc)->port_id)
+#define bfa_ioc_fetch_stats(__ioc, __stats) \
+ ((__stats)->drv_stats) = (__ioc)->stats
+#define bfa_ioc_clr_stats(__ioc) \
+ bfa_os_memset(&(__ioc)->stats, 0, sizeof((__ioc)->stats))
+#define bfa_ioc_maxfrsize(__ioc) (__ioc)->attr->maxfrsize
+#define bfa_ioc_rx_bbcredit(__ioc) (__ioc)->attr->rx_bbcredit
+#define bfa_ioc_speed_sup(__ioc) \
+ BFI_ADAPTER_GETP(SPEED, (__ioc)->attr->adapter_prop)
+
+/**
+ * IOC mailbox interface
+ */
+void bfa_ioc_mbox_queue(struct bfa_ioc_s *ioc, struct bfa_mbox_cmd_s *cmd);
+void bfa_ioc_mbox_register(struct bfa_ioc_s *ioc,
+ bfa_ioc_mbox_mcfunc_t *mcfuncs);
+void bfa_ioc_mbox_isr(struct bfa_ioc_s *ioc);
+void bfa_ioc_mbox_send(struct bfa_ioc_s *ioc, void *ioc_msg, int len);
+void bfa_ioc_msgget(struct bfa_ioc_s *ioc, void *mbmsg);
+void bfa_ioc_mbox_regisr(struct bfa_ioc_s *ioc, enum bfi_mclass mc,
+ bfa_ioc_mbox_mcfunc_t cbfn, void *cbarg);
+
+/**
+ * IOC interfaces
+ */
+void bfa_ioc_attach(struct bfa_ioc_s *ioc, void *bfa,
+ struct bfa_ioc_cbfn_s *cbfn, struct bfa_timer_mod_s *timer_mod,
+ struct bfa_trc_mod_s *trcmod,
+ struct bfa_aen_s *aen, struct bfa_log_mod_s *logm);
+void bfa_ioc_detach(struct bfa_ioc_s *ioc);
+void bfa_ioc_pci_init(struct bfa_ioc_s *ioc, struct bfa_pcidev_s *pcidev,
+ enum bfi_mclass mc);
+u32 bfa_ioc_meminfo(void);
+void bfa_ioc_mem_claim(struct bfa_ioc_s *ioc, u8 *dm_kva, u64 dm_pa);
+void bfa_ioc_enable(struct bfa_ioc_s *ioc);
+void bfa_ioc_disable(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_intx_claim(struct bfa_ioc_s *ioc);
+
+void bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type, u32 boot_param);
+void bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *msg);
+void bfa_ioc_error_isr(struct bfa_ioc_s *ioc);
+void bfa_ioc_isr_mode_set(struct bfa_ioc_s *ioc, bfa_boolean_t intx);
+bfa_status_t bfa_ioc_pll_init(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_is_operational(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_is_disabled(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_fw_mismatch(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_adapter_is_disabled(struct bfa_ioc_s *ioc);
+void bfa_ioc_cfg_complete(struct bfa_ioc_s *ioc);
+void bfa_ioc_get_attr(struct bfa_ioc_s *ioc, struct bfa_ioc_attr_s *ioc_attr);
+void bfa_ioc_get_adapter_attr(struct bfa_ioc_s *ioc,
+ struct bfa_adapter_attr_s *ad_attr);
+int bfa_ioc_debug_trcsz(bfa_boolean_t auto_recover);
+void bfa_ioc_debug_memclaim(struct bfa_ioc_s *ioc, void *dbg_fwsave);
+bfa_status_t bfa_ioc_debug_fwsave(struct bfa_ioc_s *ioc, void *trcdata,
+ int *trclen);
+bfa_status_t bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata,
+ int *trclen);
+u32 bfa_ioc_smem_pgnum(struct bfa_ioc_s *ioc, u32 fmaddr);
+u32 bfa_ioc_smem_pgoff(struct bfa_ioc_s *ioc, u32 fmaddr);
+void bfa_ioc_set_fcmode(struct bfa_ioc_s *ioc);
+bfa_boolean_t bfa_ioc_get_fcmode(struct bfa_ioc_s *ioc);
+void bfa_ioc_hbfail_register(struct bfa_ioc_s *ioc,
+ struct bfa_ioc_hbfail_notify_s *notify);
+
+/*
+ * bfa mfg wwn API functions
+ */
+wwn_t bfa_ioc_get_pwwn(struct bfa_ioc_s *ioc);
+wwn_t bfa_ioc_get_nwwn(struct bfa_ioc_s *ioc);
+wwn_t bfa_ioc_get_wwn_naa5(struct bfa_ioc_s *ioc, u16 inst);
+mac_t bfa_ioc_get_mac(struct bfa_ioc_s *ioc);
+u64 bfa_ioc_get_adid(struct bfa_ioc_s *ioc);
+
+#endif /* __BFA_IOC_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <cs/bfa_debug.h>
+#include <bfa_priv.h>
+#include <log/bfa_log_hal.h>
+#include <bfi/bfi_boot.h>
+#include <bfi/bfi_cbreg.h>
+#include <aen/bfa_aen_ioc.h>
+#include <defs/bfa_defs_iocfc.h>
+#include <defs/bfa_defs_pci.h>
+#include "bfa_callback_priv.h"
+#include "bfad_drv.h"
+
+BFA_TRC_FILE(HAL, IOCFC);
+
+/**
+ * IOC local definitions
+ */
+#define BFA_IOCFC_TOV 5000 /* msecs */
+
+enum {
+ BFA_IOCFC_ACT_NONE = 0,
+ BFA_IOCFC_ACT_INIT = 1,
+ BFA_IOCFC_ACT_STOP = 2,
+ BFA_IOCFC_ACT_DISABLE = 3,
+};
+
+/*
+ * forward declarations
+ */
+static void bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status);
+static void bfa_iocfc_disable_cbfn(void *bfa_arg);
+static void bfa_iocfc_hbfail_cbfn(void *bfa_arg);
+static void bfa_iocfc_reset_cbfn(void *bfa_arg);
+static void bfa_iocfc_stats_clear(void *bfa_arg);
+static void bfa_iocfc_stats_swap(struct bfa_fw_stats_s *d,
+ struct bfa_fw_stats_s *s);
+static void bfa_iocfc_stats_clr_cb(void *bfa_arg, bfa_boolean_t complete);
+static void bfa_iocfc_stats_clr_timeout(void *bfa_arg);
+static void bfa_iocfc_stats_cb(void *bfa_arg, bfa_boolean_t complete);
+static void bfa_iocfc_stats_timeout(void *bfa_arg);
+
+static struct bfa_ioc_cbfn_s bfa_iocfc_cbfn;
+
+/**
+ * bfa_ioc_pvt BFA IOC private functions
+ */
+
+static void
+bfa_iocfc_cqs_sz(struct bfa_iocfc_cfg_s *cfg, u32 *dm_len)
+{
+ int i, per_reqq_sz, per_rspq_sz;
+
+ per_reqq_sz = BFA_ROUNDUP((cfg->drvcfg.num_reqq_elems * BFI_LMSG_SZ),
+ BFA_DMA_ALIGN_SZ);
+ per_rspq_sz = BFA_ROUNDUP((cfg->drvcfg.num_rspq_elems * BFI_LMSG_SZ),
+ BFA_DMA_ALIGN_SZ);
+
+ /*
+ * Calculate CQ size
+ */
+ for (i = 0; i < cfg->fwcfg.num_cqs; i++) {
+ *dm_len = *dm_len + per_reqq_sz;
+ *dm_len = *dm_len + per_rspq_sz;
+ }
+
+ /*
+ * Calculate Shadow CI/PI size
+ */
+ for (i = 0; i < cfg->fwcfg.num_cqs; i++)
+ *dm_len += (2 * BFA_CACHELINE_SZ);
+}
+
+static void
+bfa_iocfc_fw_cfg_sz(struct bfa_iocfc_cfg_s *cfg, u32 *dm_len)
+{
+ *dm_len +=
+ BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfg_s), BFA_CACHELINE_SZ);
+ *dm_len +=
+ BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfgrsp_s),
+ BFA_CACHELINE_SZ);
+ *dm_len += BFA_ROUNDUP(sizeof(struct bfa_fw_stats_s), BFA_CACHELINE_SZ);
+}
+
+/**
+ * Use the Mailbox interface to send BFI_IOCFC_H2I_CFG_REQ
+ */
+static void
+bfa_iocfc_send_cfg(void *bfa_arg)
+{
+ struct bfa_s *bfa = bfa_arg;
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ struct bfi_iocfc_cfg_req_s cfg_req;
+ struct bfi_iocfc_cfg_s *cfg_info = iocfc->cfginfo;
+ struct bfa_iocfc_cfg_s *cfg = &iocfc->cfg;
+ int i;
+
+ bfa_assert(cfg->fwcfg.num_cqs <= BFI_IOC_MAX_CQS);
+ bfa_trc(bfa, cfg->fwcfg.num_cqs);
+
+ iocfc->cfgdone = BFA_FALSE;
+ bfa_iocfc_reset_queues(bfa);
+
+ /**
+ * initialize IOC configuration info
+ */
+ cfg_info->endian_sig = BFI_IOC_ENDIAN_SIG;
+ cfg_info->num_cqs = cfg->fwcfg.num_cqs;
+
+ bfa_dma_be_addr_set(cfg_info->cfgrsp_addr, iocfc->cfgrsp_dma.pa);
+ bfa_dma_be_addr_set(cfg_info->stats_addr, iocfc->stats_pa);
+
+ /**
+ * dma map REQ and RSP circular queues and shadow pointers
+ */
+ for (i = 0; i < cfg->fwcfg.num_cqs; i++) {
+ bfa_dma_be_addr_set(cfg_info->req_cq_ba[i],
+ iocfc->req_cq_ba[i].pa);
+ bfa_dma_be_addr_set(cfg_info->req_shadow_ci[i],
+ iocfc->req_cq_shadow_ci[i].pa);
+ cfg_info->req_cq_elems[i] =
+ bfa_os_htons(cfg->drvcfg.num_reqq_elems);
+
+ bfa_dma_be_addr_set(cfg_info->rsp_cq_ba[i],
+ iocfc->rsp_cq_ba[i].pa);
+ bfa_dma_be_addr_set(cfg_info->rsp_shadow_pi[i],
+ iocfc->rsp_cq_shadow_pi[i].pa);
+ cfg_info->rsp_cq_elems[i] =
+ bfa_os_htons(cfg->drvcfg.num_rspq_elems);
+ }
+
+ /**
+ * dma map IOC configuration itself
+ */
+ bfi_h2i_set(cfg_req.mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_CFG_REQ,
+ bfa_lpuid(bfa));
+ bfa_dma_be_addr_set(cfg_req.ioc_cfg_dma_addr, iocfc->cfg_info.pa);
+
+ bfa_ioc_mbox_send(&bfa->ioc, &cfg_req,
+ sizeof(struct bfi_iocfc_cfg_req_s));
+}
+
+static void
+bfa_iocfc_init_mem(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_pcidev_s *pcidev)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ bfa->bfad = bfad;
+ iocfc->bfa = bfa;
+ iocfc->action = BFA_IOCFC_ACT_NONE;
+
+ bfa_os_assign(iocfc->cfg, *cfg);
+
+ /**
+ * Initialize chip specific handlers.
+ */
+ if (bfa_ioc_devid(&bfa->ioc) == BFA_PCI_DEVICE_ID_CT) {
+ iocfc->hwif.hw_reginit = bfa_hwct_reginit;
+ iocfc->hwif.hw_rspq_ack = bfa_hwct_rspq_ack;
+ iocfc->hwif.hw_msix_init = bfa_hwct_msix_init;
+ iocfc->hwif.hw_msix_install = bfa_hwct_msix_install;
+ iocfc->hwif.hw_msix_uninstall = bfa_hwct_msix_uninstall;
+ iocfc->hwif.hw_isr_mode_set = bfa_hwct_isr_mode_set;
+ iocfc->hwif.hw_msix_getvecs = bfa_hwct_msix_getvecs;
+ } else {
+ iocfc->hwif.hw_reginit = bfa_hwcb_reginit;
+ iocfc->hwif.hw_rspq_ack = bfa_hwcb_rspq_ack;
+ iocfc->hwif.hw_msix_init = bfa_hwcb_msix_init;
+ iocfc->hwif.hw_msix_install = bfa_hwcb_msix_install;
+ iocfc->hwif.hw_msix_uninstall = bfa_hwcb_msix_uninstall;
+ iocfc->hwif.hw_isr_mode_set = bfa_hwcb_isr_mode_set;
+ iocfc->hwif.hw_msix_getvecs = bfa_hwcb_msix_getvecs;
+ }
+
+ iocfc->hwif.hw_reginit(bfa);
+ bfa->msix.nvecs = 0;
+}
+
+static void
+bfa_iocfc_mem_claim(struct bfa_s *bfa, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo)
+{
+ u8 *dm_kva;
+ u64 dm_pa;
+ int i, per_reqq_sz, per_rspq_sz;
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ int dbgsz;
+
+ dm_kva = bfa_meminfo_dma_virt(meminfo);
+ dm_pa = bfa_meminfo_dma_phys(meminfo);
+
+ /*
+ * First allocate dma memory for IOC.
+ */
+ bfa_ioc_mem_claim(&bfa->ioc, dm_kva, dm_pa);
+ dm_kva += bfa_ioc_meminfo();
+ dm_pa += bfa_ioc_meminfo();
+
+ /*
+ * Claim DMA-able memory for the request/response queues and for shadow
+ * ci/pi registers
+ */
+ per_reqq_sz = BFA_ROUNDUP((cfg->drvcfg.num_reqq_elems * BFI_LMSG_SZ),
+ BFA_DMA_ALIGN_SZ);
+ per_rspq_sz = BFA_ROUNDUP((cfg->drvcfg.num_rspq_elems * BFI_LMSG_SZ),
+ BFA_DMA_ALIGN_SZ);
+
+ for (i = 0; i < cfg->fwcfg.num_cqs; i++) {
+ iocfc->req_cq_ba[i].kva = dm_kva;
+ iocfc->req_cq_ba[i].pa = dm_pa;
+ bfa_os_memset(dm_kva, 0, per_reqq_sz);
+ dm_kva += per_reqq_sz;
+ dm_pa += per_reqq_sz;
+
+ iocfc->rsp_cq_ba[i].kva = dm_kva;
+ iocfc->rsp_cq_ba[i].pa = dm_pa;
+ bfa_os_memset(dm_kva, 0, per_rspq_sz);
+ dm_kva += per_rspq_sz;
+ dm_pa += per_rspq_sz;
+ }
+
+ for (i = 0; i < cfg->fwcfg.num_cqs; i++) {
+ iocfc->req_cq_shadow_ci[i].kva = dm_kva;
+ iocfc->req_cq_shadow_ci[i].pa = dm_pa;
+ dm_kva += BFA_CACHELINE_SZ;
+ dm_pa += BFA_CACHELINE_SZ;
+
+ iocfc->rsp_cq_shadow_pi[i].kva = dm_kva;
+ iocfc->rsp_cq_shadow_pi[i].pa = dm_pa;
+ dm_kva += BFA_CACHELINE_SZ;
+ dm_pa += BFA_CACHELINE_SZ;
+ }
+
+ /*
+ * Claim DMA-able memory for the config info page
+ */
+ bfa->iocfc.cfg_info.kva = dm_kva;
+ bfa->iocfc.cfg_info.pa = dm_pa;
+ bfa->iocfc.cfginfo = (struct bfi_iocfc_cfg_s *) dm_kva;
+ dm_kva += BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfg_s), BFA_CACHELINE_SZ);
+ dm_pa += BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfg_s), BFA_CACHELINE_SZ);
+
+ /*
+ * Claim DMA-able memory for the config response
+ */
+ bfa->iocfc.cfgrsp_dma.kva = dm_kva;
+ bfa->iocfc.cfgrsp_dma.pa = dm_pa;
+ bfa->iocfc.cfgrsp = (struct bfi_iocfc_cfgrsp_s *) dm_kva;
+
+ dm_kva +=
+ BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfgrsp_s),
+ BFA_CACHELINE_SZ);
+ dm_pa += BFA_ROUNDUP(sizeof(struct bfi_iocfc_cfgrsp_s),
+ BFA_CACHELINE_SZ);
+
+ /*
+ * Claim DMA-able memory for iocfc stats
+ */
+ bfa->iocfc.stats_kva = dm_kva;
+ bfa->iocfc.stats_pa = dm_pa;
+ bfa->iocfc.fw_stats = (struct bfa_fw_stats_s *) dm_kva;
+ dm_kva += BFA_ROUNDUP(sizeof(struct bfa_fw_stats_s), BFA_CACHELINE_SZ);
+ dm_pa += BFA_ROUNDUP(sizeof(struct bfa_fw_stats_s), BFA_CACHELINE_SZ);
+
+ bfa_meminfo_dma_virt(meminfo) = dm_kva;
+ bfa_meminfo_dma_phys(meminfo) = dm_pa;
+
+ dbgsz = bfa_ioc_debug_trcsz(bfa_auto_recover);
+ if (dbgsz > 0) {
+ bfa_ioc_debug_memclaim(&bfa->ioc, bfa_meminfo_kva(meminfo));
+ bfa_meminfo_kva(meminfo) += dbgsz;
+ }
+}
+
+/**
+ * BFA submodules initialization completion notification.
+ */
+static void
+bfa_iocfc_initdone_submod(struct bfa_s *bfa)
+{
+ int i;
+
+ for (i = 0; hal_mods[i]; i++)
+ hal_mods[i]->initdone(bfa);
+}
+
+/**
+ * Start BFA submodules.
+ */
+static void
+bfa_iocfc_start_submod(struct bfa_s *bfa)
+{
+ int i;
+
+ bfa->rme_process = BFA_TRUE;
+
+ for (i = 0; hal_mods[i]; i++)
+ hal_mods[i]->start(bfa);
+}
+
+/**
+ * Disable BFA submodules.
+ */
+static void
+bfa_iocfc_disable_submod(struct bfa_s *bfa)
+{
+ int i;
+
+ for (i = 0; hal_mods[i]; i++)
+ hal_mods[i]->iocdisable(bfa);
+}
+
+static void
+bfa_iocfc_init_cb(void *bfa_arg, bfa_boolean_t complete)
+{
+ struct bfa_s *bfa = bfa_arg;
+
+ if (complete) {
+ if (bfa->iocfc.cfgdone)
+ bfa_cb_init(bfa->bfad, BFA_STATUS_OK);
+ else
+ bfa_cb_init(bfa->bfad, BFA_STATUS_FAILED);
+ } else
+ bfa->iocfc.action = BFA_IOCFC_ACT_NONE;
+}
+
+static void
+bfa_iocfc_stop_cb(void *bfa_arg, bfa_boolean_t compl)
+{
+ struct bfa_s *bfa = bfa_arg;
+ struct bfad_s *bfad = bfa->bfad;
+
+ if (compl)
+ complete(&bfad->comp);
+
+ else
+ bfa->iocfc.action = BFA_IOCFC_ACT_NONE;
+}
+
+static void
+bfa_iocfc_disable_cb(void *bfa_arg, bfa_boolean_t compl)
+{
+ struct bfa_s *bfa = bfa_arg;
+ struct bfad_s *bfad = bfa->bfad;
+
+ if (compl)
+ complete(&bfad->disable_comp);
+}
+
+/**
+ * Update BFA configuration from firmware configuration.
+ */
+static void
+bfa_iocfc_cfgrsp(struct bfa_s *bfa)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ struct bfi_iocfc_cfgrsp_s *cfgrsp = iocfc->cfgrsp;
+ struct bfa_iocfc_fwcfg_s *fwcfg = &cfgrsp->fwcfg;
+ struct bfi_iocfc_cfg_s *cfginfo = iocfc->cfginfo;
+
+ fwcfg->num_cqs = fwcfg->num_cqs;
+ fwcfg->num_ioim_reqs = bfa_os_ntohs(fwcfg->num_ioim_reqs);
+ fwcfg->num_tskim_reqs = bfa_os_ntohs(fwcfg->num_tskim_reqs);
+ fwcfg->num_fcxp_reqs = bfa_os_ntohs(fwcfg->num_fcxp_reqs);
+ fwcfg->num_uf_bufs = bfa_os_ntohs(fwcfg->num_uf_bufs);
+ fwcfg->num_rports = bfa_os_ntohs(fwcfg->num_rports);
+
+ cfginfo->intr_attr.coalesce = cfgrsp->intr_attr.coalesce;
+ cfginfo->intr_attr.delay = bfa_os_ntohs(cfgrsp->intr_attr.delay);
+ cfginfo->intr_attr.latency = bfa_os_ntohs(cfgrsp->intr_attr.latency);
+
+ iocfc->cfgdone = BFA_TRUE;
+
+ /**
+ * Configuration is complete - initialize/start submodules
+ */
+ if (iocfc->action == BFA_IOCFC_ACT_INIT)
+ bfa_cb_queue(bfa, &iocfc->init_hcb_qe, bfa_iocfc_init_cb, bfa);
+ else
+ bfa_iocfc_start_submod(bfa);
+}
+
+static void
+bfa_iocfc_stats_clear(void *bfa_arg)
+{
+ struct bfa_s *bfa = bfa_arg;
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ struct bfi_iocfc_stats_req_s stats_req;
+
+ bfa_timer_start(bfa, &iocfc->stats_timer,
+ bfa_iocfc_stats_clr_timeout, bfa,
+ BFA_IOCFC_TOV);
+
+ bfi_h2i_set(stats_req.mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_CLEAR_STATS_REQ,
+ bfa_lpuid(bfa));
+ bfa_ioc_mbox_send(&bfa->ioc, &stats_req,
+ sizeof(struct bfi_iocfc_stats_req_s));
+}
+
+static void
+bfa_iocfc_stats_swap(struct bfa_fw_stats_s *d, struct bfa_fw_stats_s *s)
+{
+ u32 *dip = (u32 *) d;
+ u32 *sip = (u32 *) s;
+ int i;
+
+ for (i = 0; i < (sizeof(struct bfa_fw_stats_s) / sizeof(u32)); i++)
+ dip[i] = bfa_os_ntohl(sip[i]);
+}
+
+static void
+bfa_iocfc_stats_clr_cb(void *bfa_arg, bfa_boolean_t complete)
+{
+ struct bfa_s *bfa = bfa_arg;
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ if (complete) {
+ bfa_ioc_clr_stats(&bfa->ioc);
+ iocfc->stats_cbfn(iocfc->stats_cbarg, iocfc->stats_status);
+ } else {
+ iocfc->stats_busy = BFA_FALSE;
+ iocfc->stats_status = BFA_STATUS_OK;
+ }
+}
+
+static void
+bfa_iocfc_stats_clr_timeout(void *bfa_arg)
+{
+ struct bfa_s *bfa = bfa_arg;
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ bfa_trc(bfa, 0);
+
+ iocfc->stats_status = BFA_STATUS_ETIMER;
+ bfa_cb_queue(bfa, &iocfc->stats_hcb_qe, bfa_iocfc_stats_clr_cb, bfa);
+}
+
+static void
+bfa_iocfc_stats_cb(void *bfa_arg, bfa_boolean_t complete)
+{
+ struct bfa_s *bfa = bfa_arg;
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ if (complete) {
+ if (iocfc->stats_status == BFA_STATUS_OK) {
+ bfa_os_memset(iocfc->stats_ret, 0,
+ sizeof(*iocfc->stats_ret));
+ bfa_iocfc_stats_swap(&iocfc->stats_ret->fw_stats,
+ iocfc->fw_stats);
+ }
+ iocfc->stats_cbfn(iocfc->stats_cbarg, iocfc->stats_status);
+ } else {
+ iocfc->stats_busy = BFA_FALSE;
+ iocfc->stats_status = BFA_STATUS_OK;
+ }
+}
+
+static void
+bfa_iocfc_stats_timeout(void *bfa_arg)
+{
+ struct bfa_s *bfa = bfa_arg;
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ bfa_trc(bfa, 0);
+
+ iocfc->stats_status = BFA_STATUS_ETIMER;
+ bfa_cb_queue(bfa, &iocfc->stats_hcb_qe, bfa_iocfc_stats_cb, bfa);
+}
+
+static void
+bfa_iocfc_stats_query(struct bfa_s *bfa)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ struct bfi_iocfc_stats_req_s stats_req;
+
+ bfa_timer_start(bfa, &iocfc->stats_timer,
+ bfa_iocfc_stats_timeout, bfa, BFA_IOCFC_TOV);
+
+ bfi_h2i_set(stats_req.mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_GET_STATS_REQ,
+ bfa_lpuid(bfa));
+ bfa_ioc_mbox_send(&bfa->ioc, &stats_req,
+ sizeof(struct bfi_iocfc_stats_req_s));
+}
+
+void
+bfa_iocfc_reset_queues(struct bfa_s *bfa)
+{
+ int q;
+
+ for (q = 0; q < BFI_IOC_MAX_CQS; q++) {
+ bfa_reqq_ci(bfa, q) = 0;
+ bfa_reqq_pi(bfa, q) = 0;
+ bfa_rspq_ci(bfa, q) = 0;
+ bfa_rspq_pi(bfa, q) = 0;
+ }
+}
+
+/**
+ * IOC enable request is complete
+ */
+static void
+bfa_iocfc_enable_cbfn(void *bfa_arg, enum bfa_status status)
+{
+ struct bfa_s *bfa = bfa_arg;
+
+ if (status != BFA_STATUS_OK) {
+ bfa_isr_disable(bfa);
+ if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT)
+ bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe,
+ bfa_iocfc_init_cb, bfa);
+ return;
+ }
+
+ bfa_iocfc_initdone_submod(bfa);
+ bfa_iocfc_send_cfg(bfa);
+}
+
+/**
+ * IOC disable request is complete
+ */
+static void
+bfa_iocfc_disable_cbfn(void *bfa_arg)
+{
+ struct bfa_s *bfa = bfa_arg;
+
+ bfa_isr_disable(bfa);
+ bfa_iocfc_disable_submod(bfa);
+
+ if (bfa->iocfc.action == BFA_IOCFC_ACT_STOP)
+ bfa_cb_queue(bfa, &bfa->iocfc.stop_hcb_qe, bfa_iocfc_stop_cb,
+ bfa);
+ else {
+ bfa_assert(bfa->iocfc.action == BFA_IOCFC_ACT_DISABLE);
+ bfa_cb_queue(bfa, &bfa->iocfc.dis_hcb_qe, bfa_iocfc_disable_cb,
+ bfa);
+ }
+}
+
+/**
+ * Notify sub-modules of hardware failure.
+ */
+static void
+bfa_iocfc_hbfail_cbfn(void *bfa_arg)
+{
+ struct bfa_s *bfa = bfa_arg;
+
+ bfa->rme_process = BFA_FALSE;
+
+ bfa_isr_disable(bfa);
+ bfa_iocfc_disable_submod(bfa);
+
+ if (bfa->iocfc.action == BFA_IOCFC_ACT_INIT)
+ bfa_cb_queue(bfa, &bfa->iocfc.init_hcb_qe, bfa_iocfc_init_cb,
+ bfa);
+}
+
+/**
+ * Actions on chip-reset completion.
+ */
+static void
+bfa_iocfc_reset_cbfn(void *bfa_arg)
+{
+ struct bfa_s *bfa = bfa_arg;
+
+ bfa_iocfc_reset_queues(bfa);
+ bfa_isr_enable(bfa);
+}
+
+
+
+/**
+ * bfa_ioc_public
+ */
+
+/**
+ * Query IOC memory requirement information.
+ */
+void
+bfa_iocfc_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+ u32 *dm_len)
+{
+ /* dma memory for IOC */
+ *dm_len += bfa_ioc_meminfo();
+
+ bfa_iocfc_fw_cfg_sz(cfg, dm_len);
+ bfa_iocfc_cqs_sz(cfg, dm_len);
+ *km_len += bfa_ioc_debug_trcsz(bfa_auto_recover);
+}
+
+/**
+ * Query IOC memory requirement information.
+ */
+void
+bfa_iocfc_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+ int i;
+
+ bfa_iocfc_cbfn.enable_cbfn = bfa_iocfc_enable_cbfn;
+ bfa_iocfc_cbfn.disable_cbfn = bfa_iocfc_disable_cbfn;
+ bfa_iocfc_cbfn.hbfail_cbfn = bfa_iocfc_hbfail_cbfn;
+ bfa_iocfc_cbfn.reset_cbfn = bfa_iocfc_reset_cbfn;
+
+ bfa_ioc_attach(&bfa->ioc, bfa, &bfa_iocfc_cbfn, &bfa->timer_mod,
+ bfa->trcmod, bfa->aen, bfa->logm);
+ bfa_ioc_pci_init(&bfa->ioc, pcidev, BFI_MC_IOCFC);
+ bfa_ioc_mbox_register(&bfa->ioc, bfa_mbox_isrs);
+
+ /**
+ * Choose FC (ssid: 0x1C) v/s FCoE (ssid: 0x14) mode.
+ */
+ if (0)
+ bfa_ioc_set_fcmode(&bfa->ioc);
+
+ bfa_iocfc_init_mem(bfa, bfad, cfg, pcidev);
+ bfa_iocfc_mem_claim(bfa, cfg, meminfo);
+ bfa_timer_init(&bfa->timer_mod);
+
+ INIT_LIST_HEAD(&bfa->comp_q);
+ for (i = 0; i < BFI_IOC_MAX_CQS; i++)
+ INIT_LIST_HEAD(&bfa->reqq_waitq[i]);
+}
+
+/**
+ * Query IOC memory requirement information.
+ */
+void
+bfa_iocfc_detach(struct bfa_s *bfa)
+{
+ bfa_ioc_detach(&bfa->ioc);
+}
+
+/**
+ * Query IOC memory requirement information.
+ */
+void
+bfa_iocfc_init(struct bfa_s *bfa)
+{
+ bfa->iocfc.action = BFA_IOCFC_ACT_INIT;
+ bfa_ioc_enable(&bfa->ioc);
+ bfa_msix_install(bfa);
+}
+
+/**
+ * IOC start called from bfa_start(). Called to start IOC operations
+ * at driver instantiation for this instance.
+ */
+void
+bfa_iocfc_start(struct bfa_s *bfa)
+{
+ if (bfa->iocfc.cfgdone)
+ bfa_iocfc_start_submod(bfa);
+}
+
+/**
+ * IOC stop called from bfa_stop(). Called only when driver is unloaded
+ * for this instance.
+ */
+void
+bfa_iocfc_stop(struct bfa_s *bfa)
+{
+ bfa->iocfc.action = BFA_IOCFC_ACT_STOP;
+
+ bfa->rme_process = BFA_FALSE;
+ bfa_ioc_disable(&bfa->ioc);
+}
+
+void
+bfa_iocfc_isr(void *bfaarg, struct bfi_mbmsg_s *m)
+{
+ struct bfa_s *bfa = bfaarg;
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ union bfi_iocfc_i2h_msg_u *msg;
+
+ msg = (union bfi_iocfc_i2h_msg_u *) m;
+ bfa_trc(bfa, msg->mh.msg_id);
+
+ switch (msg->mh.msg_id) {
+ case BFI_IOCFC_I2H_CFG_REPLY:
+ iocfc->cfg_reply = &msg->cfg_reply;
+ bfa_iocfc_cfgrsp(bfa);
+ break;
+
+ case BFI_IOCFC_I2H_GET_STATS_RSP:
+ if (iocfc->stats_busy == BFA_FALSE
+ || iocfc->stats_status == BFA_STATUS_ETIMER)
+ break;
+
+ bfa_timer_stop(&iocfc->stats_timer);
+ iocfc->stats_status = BFA_STATUS_OK;
+ bfa_cb_queue(bfa, &iocfc->stats_hcb_qe, bfa_iocfc_stats_cb,
+ bfa);
+ break;
+ case BFI_IOCFC_I2H_CLEAR_STATS_RSP:
+ /*
+ * check for timer pop before processing the rsp
+ */
+ if (iocfc->stats_busy == BFA_FALSE
+ || iocfc->stats_status == BFA_STATUS_ETIMER)
+ break;
+
+ bfa_timer_stop(&iocfc->stats_timer);
+ iocfc->stats_status = BFA_STATUS_OK;
+ bfa_cb_queue(bfa, &iocfc->stats_hcb_qe,
+ bfa_iocfc_stats_clr_cb, bfa);
+ break;
+ case BFI_IOCFC_I2H_UPDATEQ_RSP:
+ iocfc->updateq_cbfn(iocfc->updateq_cbarg, BFA_STATUS_OK);
+ break;
+ default:
+ bfa_assert(0);
+ }
+}
+
+#ifndef BFA_BIOS_BUILD
+void
+bfa_adapter_get_attr(struct bfa_s *bfa, struct bfa_adapter_attr_s *ad_attr)
+{
+ bfa_ioc_get_adapter_attr(&bfa->ioc, ad_attr);
+}
+
+u64
+bfa_adapter_get_id(struct bfa_s *bfa)
+{
+ return bfa_ioc_get_adid(&bfa->ioc);
+}
+
+void
+bfa_iocfc_get_attr(struct bfa_s *bfa, struct bfa_iocfc_attr_s *attr)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ attr->intr_attr = iocfc->cfginfo->intr_attr;
+ attr->config = iocfc->cfg;
+}
+
+bfa_status_t
+bfa_iocfc_israttr_set(struct bfa_s *bfa, struct bfa_iocfc_intr_attr_s *attr)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ struct bfi_iocfc_set_intr_req_s *m;
+
+ iocfc->cfginfo->intr_attr = *attr;
+ if (!bfa_iocfc_is_operational(bfa))
+ return BFA_STATUS_OK;
+
+ m = bfa_reqq_next(bfa, BFA_REQQ_IOC);
+ if (!m)
+ return BFA_STATUS_DEVBUSY;
+
+ bfi_h2i_set(m->mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_SET_INTR_REQ,
+ bfa_lpuid(bfa));
+ m->coalesce = attr->coalesce;
+ m->delay = bfa_os_htons(attr->delay);
+ m->latency = bfa_os_htons(attr->latency);
+
+ bfa_trc(bfa, attr->delay);
+ bfa_trc(bfa, attr->latency);
+
+ bfa_reqq_produce(bfa, BFA_REQQ_IOC);
+ return BFA_STATUS_OK;
+}
+
+void
+bfa_iocfc_set_snsbase(struct bfa_s *bfa, u64 snsbase_pa)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ iocfc->cfginfo->sense_buf_len = (BFI_IOIM_SNSLEN - 1);
+ bfa_dma_be_addr_set(iocfc->cfginfo->ioim_snsbase, snsbase_pa);
+}
+
+bfa_status_t
+bfa_iocfc_get_stats(struct bfa_s *bfa, struct bfa_iocfc_stats_s *stats,
+ bfa_cb_ioc_t cbfn, void *cbarg)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ if (iocfc->stats_busy) {
+ bfa_trc(bfa, iocfc->stats_busy);
+ return (BFA_STATUS_DEVBUSY);
+ }
+
+ iocfc->stats_busy = BFA_TRUE;
+ iocfc->stats_ret = stats;
+ iocfc->stats_cbfn = cbfn;
+ iocfc->stats_cbarg = cbarg;
+
+ bfa_iocfc_stats_query(bfa);
+
+ return (BFA_STATUS_OK);
+}
+
+bfa_status_t
+bfa_iocfc_clear_stats(struct bfa_s *bfa, bfa_cb_ioc_t cbfn, void *cbarg)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+
+ if (iocfc->stats_busy) {
+ bfa_trc(bfa, iocfc->stats_busy);
+ return (BFA_STATUS_DEVBUSY);
+ }
+
+ iocfc->stats_busy = BFA_TRUE;
+ iocfc->stats_cbfn = cbfn;
+ iocfc->stats_cbarg = cbarg;
+
+ bfa_iocfc_stats_clear(bfa);
+ return (BFA_STATUS_OK);
+}
+
+/**
+ * Enable IOC after it is disabled.
+ */
+void
+bfa_iocfc_enable(struct bfa_s *bfa)
+{
+ bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0,
+ "IOC Enable");
+ bfa_ioc_enable(&bfa->ioc);
+}
+
+void
+bfa_iocfc_disable(struct bfa_s *bfa)
+{
+ bfa_plog_str(bfa->plog, BFA_PL_MID_HAL, BFA_PL_EID_MISC, 0,
+ "IOC Disable");
+ bfa->iocfc.action = BFA_IOCFC_ACT_DISABLE;
+
+ bfa->rme_process = BFA_FALSE;
+ bfa_ioc_disable(&bfa->ioc);
+}
+
+
+bfa_boolean_t
+bfa_iocfc_is_operational(struct bfa_s *bfa)
+{
+ return bfa_ioc_is_operational(&bfa->ioc) && bfa->iocfc.cfgdone;
+}
+
+/**
+ * Return boot target port wwns -- read from boot information in flash.
+ */
+void
+bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t **wwns)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ struct bfi_iocfc_cfgrsp_s *cfgrsp = iocfc->cfgrsp;
+
+ *nwwns = cfgrsp->bootwwns.nwwns;
+ *wwns = cfgrsp->bootwwns.wwn;
+}
+
+#endif
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_IOCFC_H__
+#define __BFA_IOCFC_H__
+
+#include <bfa_ioc.h>
+#include <bfa.h>
+#include <bfi/bfi_iocfc.h>
+#include <bfa_callback_priv.h>
+
+#define BFA_REQQ_NELEMS_MIN (4)
+#define BFA_RSPQ_NELEMS_MIN (4)
+
+struct bfa_iocfc_regs_s {
+ bfa_os_addr_t intr_status;
+ bfa_os_addr_t intr_mask;
+ bfa_os_addr_t cpe_q_pi[BFI_IOC_MAX_CQS];
+ bfa_os_addr_t cpe_q_ci[BFI_IOC_MAX_CQS];
+ bfa_os_addr_t cpe_q_depth[BFI_IOC_MAX_CQS];
+ bfa_os_addr_t cpe_q_ctrl[BFI_IOC_MAX_CQS];
+ bfa_os_addr_t rme_q_ci[BFI_IOC_MAX_CQS];
+ bfa_os_addr_t rme_q_pi[BFI_IOC_MAX_CQS];
+ bfa_os_addr_t rme_q_depth[BFI_IOC_MAX_CQS];
+ bfa_os_addr_t rme_q_ctrl[BFI_IOC_MAX_CQS];
+};
+
+/**
+ * MSIX vector handlers
+ */
+#define BFA_MSIX_MAX_VECTORS 22
+typedef void (*bfa_msix_handler_t)(struct bfa_s *bfa, int vec);
+struct bfa_msix_s {
+ int nvecs;
+ bfa_msix_handler_t handler[BFA_MSIX_MAX_VECTORS];
+};
+
+/**
+ * Chip specific interfaces
+ */
+struct bfa_hwif_s {
+ void (*hw_reginit)(struct bfa_s *bfa);
+ void (*hw_rspq_ack)(struct bfa_s *bfa, int rspq);
+ void (*hw_msix_init)(struct bfa_s *bfa, int nvecs);
+ void (*hw_msix_install)(struct bfa_s *bfa);
+ void (*hw_msix_uninstall)(struct bfa_s *bfa);
+ void (*hw_isr_mode_set)(struct bfa_s *bfa, bfa_boolean_t msix);
+ void (*hw_msix_getvecs)(struct bfa_s *bfa, u32 *vecmap,
+ u32 *nvecs, u32 *maxvec);
+};
+typedef void (*bfa_cb_iocfc_t) (void *cbarg, enum bfa_status status);
+
+struct bfa_iocfc_s {
+ struct bfa_s *bfa;
+ struct bfa_iocfc_cfg_s cfg;
+ int action;
+
+ u32 req_cq_pi[BFI_IOC_MAX_CQS];
+ u32 rsp_cq_ci[BFI_IOC_MAX_CQS];
+
+ struct bfa_cb_qe_s init_hcb_qe;
+ struct bfa_cb_qe_s stop_hcb_qe;
+ struct bfa_cb_qe_s dis_hcb_qe;
+ struct bfa_cb_qe_s stats_hcb_qe;
+ bfa_boolean_t cfgdone;
+
+ struct bfa_dma_s cfg_info;
+ struct bfi_iocfc_cfg_s *cfginfo;
+ struct bfa_dma_s cfgrsp_dma;
+ struct bfi_iocfc_cfgrsp_s *cfgrsp;
+ struct bfi_iocfc_cfg_reply_s *cfg_reply;
+
+ u8 *stats_kva;
+ u64 stats_pa;
+ struct bfa_fw_stats_s *fw_stats;
+ struct bfa_timer_s stats_timer; /* timer */
+ struct bfa_iocfc_stats_s *stats_ret; /* driver stats location */
+ bfa_status_t stats_status; /* stats/statsclr status */
+ bfa_boolean_t stats_busy; /* outstanding stats */
+ bfa_cb_ioc_t stats_cbfn; /* driver callback function */
+ void *stats_cbarg; /* user callback arg */
+
+ struct bfa_dma_s req_cq_ba[BFI_IOC_MAX_CQS];
+ struct bfa_dma_s req_cq_shadow_ci[BFI_IOC_MAX_CQS];
+ struct bfa_dma_s rsp_cq_ba[BFI_IOC_MAX_CQS];
+ struct bfa_dma_s rsp_cq_shadow_pi[BFI_IOC_MAX_CQS];
+ struct bfa_iocfc_regs_s bfa_regs; /* BFA device registers */
+ struct bfa_hwif_s hwif;
+
+ bfa_cb_iocfc_t updateq_cbfn; /* bios callback function */
+ void *updateq_cbarg; /* bios callback arg */
+};
+
+#define bfa_lpuid(__bfa) bfa_ioc_portid(&(__bfa)->ioc)
+#define bfa_msix_init(__bfa, __nvecs) \
+ (__bfa)->iocfc.hwif.hw_msix_init(__bfa, __nvecs)
+#define bfa_msix_install(__bfa) \
+ (__bfa)->iocfc.hwif.hw_msix_install(__bfa)
+#define bfa_msix_uninstall(__bfa) \
+ (__bfa)->iocfc.hwif.hw_msix_uninstall(__bfa)
+#define bfa_isr_mode_set(__bfa, __msix) \
+ (__bfa)->iocfc.hwif.hw_isr_mode_set(__bfa, __msix)
+#define bfa_msix_getvecs(__bfa, __vecmap, __nvecs, __maxvec) \
+ (__bfa)->iocfc.hwif.hw_msix_getvecs(__bfa, __vecmap, __nvecs, __maxvec)
+
+/*
+ * FC specific IOC functions.
+ */
+void bfa_iocfc_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+ u32 *dm_len);
+void bfa_iocfc_attach(struct bfa_s *bfa, void *bfad,
+ struct bfa_iocfc_cfg_s *cfg, struct bfa_meminfo_s *meminfo,
+ struct bfa_pcidev_s *pcidev);
+void bfa_iocfc_detach(struct bfa_s *bfa);
+void bfa_iocfc_init(struct bfa_s *bfa);
+void bfa_iocfc_start(struct bfa_s *bfa);
+void bfa_iocfc_stop(struct bfa_s *bfa);
+void bfa_iocfc_isr(void *bfa, struct bfi_mbmsg_s *msg);
+void bfa_iocfc_set_snsbase(struct bfa_s *bfa, u64 snsbase_pa);
+bfa_boolean_t bfa_iocfc_is_operational(struct bfa_s *bfa);
+void bfa_iocfc_reset_queues(struct bfa_s *bfa);
+void bfa_iocfc_updateq(struct bfa_s *bfa, u32 reqq_ba, u32 rspq_ba,
+ u32 reqq_sci, u32 rspq_spi,
+ bfa_cb_iocfc_t cbfn, void *cbarg);
+
+void bfa_msix_all(struct bfa_s *bfa, int vec);
+void bfa_msix_reqq(struct bfa_s *bfa, int vec);
+void bfa_msix_rspq(struct bfa_s *bfa, int vec);
+void bfa_msix_lpu_err(struct bfa_s *bfa, int vec);
+
+void bfa_hwcb_reginit(struct bfa_s *bfa);
+void bfa_hwcb_rspq_ack(struct bfa_s *bfa, int rspq);
+void bfa_hwcb_msix_init(struct bfa_s *bfa, int nvecs);
+void bfa_hwcb_msix_install(struct bfa_s *bfa);
+void bfa_hwcb_msix_uninstall(struct bfa_s *bfa);
+void bfa_hwcb_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix);
+void bfa_hwcb_msix_getvecs(struct bfa_s *bfa, u32 *vecmap,
+ u32 *nvecs, u32 *maxvec);
+void bfa_hwct_reginit(struct bfa_s *bfa);
+void bfa_hwct_rspq_ack(struct bfa_s *bfa, int rspq);
+void bfa_hwct_msix_init(struct bfa_s *bfa, int nvecs);
+void bfa_hwct_msix_install(struct bfa_s *bfa);
+void bfa_hwct_msix_uninstall(struct bfa_s *bfa);
+void bfa_hwct_isr_mode_set(struct bfa_s *bfa, bfa_boolean_t msix);
+void bfa_hwct_msix_getvecs(struct bfa_s *bfa, u32 *vecmap,
+ u32 *nvecs, u32 *maxvec);
+
+void bfa_com_meminfo(bfa_boolean_t mincfg, u32 *dm_len);
+void bfa_com_attach(struct bfa_s *bfa, struct bfa_meminfo_s *mi,
+ bfa_boolean_t mincfg);
+void bfa_iocfc_get_bootwwns(struct bfa_s *bfa, u8 *nwwns, wwn_t **wwns);
+
+#endif /* __BFA_IOCFC_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include "bfa_intr_priv.h"
+
+BFA_TRC_FILE(HAL, IOCFC_Q);
+
+void
+bfa_iocfc_updateq(struct bfa_s *bfa, u32 reqq_ba, u32 rspq_ba,
+ u32 reqq_sci, u32 rspq_spi, bfa_cb_iocfc_t cbfn,
+ void *cbarg)
+{
+ struct bfa_iocfc_s *iocfc = &bfa->iocfc;
+ struct bfi_iocfc_updateq_req_s updateq_req;
+
+ iocfc->updateq_cbfn = cbfn;
+ iocfc->updateq_cbarg = cbarg;
+
+ bfi_h2i_set(updateq_req.mh, BFI_MC_IOCFC, BFI_IOCFC_H2I_UPDATEQ_REQ,
+ bfa_lpuid(bfa));
+
+ updateq_req.reqq_ba = bfa_os_htonl(reqq_ba);
+ updateq_req.rspq_ba = bfa_os_htonl(rspq_ba);
+ updateq_req.reqq_sci = bfa_os_htonl(reqq_sci);
+ updateq_req.rspq_spi = bfa_os_htonl(rspq_spi);
+
+ bfa_ioc_mbox_send(&bfa->ioc, &updateq_req,
+ sizeof(struct bfi_iocfc_updateq_req_s));
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <cs/bfa_debug.h>
+#include <bfa_cb_ioim_macros.h>
+
+BFA_TRC_FILE(HAL, IOIM);
+
+/*
+ * forward declarations.
+ */
+static bfa_boolean_t bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim);
+static bfa_boolean_t bfa_ioim_sge_setup(struct bfa_ioim_s *ioim);
+static void bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim);
+static bfa_boolean_t bfa_ioim_send_abort(struct bfa_ioim_s *ioim);
+static void bfa_ioim_notify_cleanup(struct bfa_ioim_s *ioim);
+static void __bfa_cb_ioim_good_comp(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_ioim_comp(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_ioim_abort(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete);
+
+/**
+ * bfa_ioim_sm
+ */
+
+/**
+ * IO state machine events
+ */
+enum bfa_ioim_event {
+ BFA_IOIM_SM_START = 1, /* io start request from host */
+ BFA_IOIM_SM_COMP_GOOD = 2, /* io good comp, resource free */
+ BFA_IOIM_SM_COMP = 3, /* io comp, resource is free */
+ BFA_IOIM_SM_COMP_UTAG = 4, /* io comp, resource is free */
+ BFA_IOIM_SM_DONE = 5, /* io comp, resource not free */
+ BFA_IOIM_SM_FREE = 6, /* io resource is freed */
+ BFA_IOIM_SM_ABORT = 7, /* abort request from scsi stack */
+ BFA_IOIM_SM_ABORT_COMP = 8, /* abort from f/w */
+ BFA_IOIM_SM_ABORT_DONE = 9, /* abort completion from f/w */
+ BFA_IOIM_SM_QRESUME = 10, /* CQ space available to queue IO */
+ BFA_IOIM_SM_SGALLOCED = 11, /* SG page allocation successful */
+ BFA_IOIM_SM_SQRETRY = 12, /* sequence recovery retry */
+ BFA_IOIM_SM_HCB = 13, /* bfa callback complete */
+ BFA_IOIM_SM_CLEANUP = 14, /* IO cleanup from itnim */
+ BFA_IOIM_SM_TMSTART = 15, /* IO cleanup from tskim */
+ BFA_IOIM_SM_TMDONE = 16, /* IO cleanup from tskim */
+ BFA_IOIM_SM_HWFAIL = 17, /* IOC h/w failure event */
+ BFA_IOIM_SM_IOTOV = 18, /* ITN offline TOV */
+};
+
+/*
+ * forward declaration of IO state machine
+ */
+static void bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_sgalloc(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_active(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_abort(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_cleanup(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_qfull(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_abort_qfull(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_hcb(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_hcb_free(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+static void bfa_ioim_sm_resfree(struct bfa_ioim_s *ioim,
+ enum bfa_ioim_event event);
+
+/**
+ * IO is not started (unallocated).
+ */
+static void
+bfa_ioim_sm_uninit(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc_fp(ioim->bfa, ioim->iotag);
+ bfa_trc_fp(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_START:
+ if (!bfa_itnim_is_online(ioim->itnim)) {
+ if (!bfa_itnim_hold_io(ioim->itnim)) {
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe,
+ &ioim->fcpim->ioim_comp_q);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
+ __bfa_cb_ioim_pathtov, ioim);
+ } else {
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe,
+ &ioim->itnim->pending_q);
+ }
+ break;
+ }
+
+ if (ioim->nsges > BFI_SGE_INLINE) {
+ if (!bfa_ioim_sge_setup(ioim)) {
+ bfa_sm_set_state(ioim, bfa_ioim_sm_sgalloc);
+ return;
+ }
+ }
+
+ if (!bfa_ioim_send_ioreq(ioim)) {
+ bfa_sm_set_state(ioim, bfa_ioim_sm_qfull);
+ break;
+ }
+
+ bfa_sm_set_state(ioim, bfa_ioim_sm_active);
+ break;
+
+ case BFA_IOIM_SM_IOTOV:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
+ __bfa_cb_ioim_pathtov, ioim);
+ break;
+
+ case BFA_IOIM_SM_ABORT:
+ /**
+ * IO in pending queue can get abort requests. Complete abort
+ * requests immediately.
+ */
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_assert(bfa_q_is_on_q(&ioim->itnim->pending_q, ioim));
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+ ioim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IO is waiting for SG pages.
+ */
+static void
+bfa_ioim_sm_sgalloc(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_SGALLOCED:
+ if (!bfa_ioim_send_ioreq(ioim)) {
+ bfa_sm_set_state(ioim, bfa_ioim_sm_qfull);
+ break;
+ }
+ bfa_sm_set_state(ioim, bfa_ioim_sm_active);
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_sgpg_wcancel(ioim->bfa, &ioim->iosp->sgpg_wqe);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_ABORT:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_sgpg_wcancel(ioim->bfa, &ioim->iosp->sgpg_wqe);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_sgpg_wcancel(ioim->bfa, &ioim->iosp->sgpg_wqe);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IO is active.
+ */
+static void
+bfa_ioim_sm_active(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc_fp(ioim->bfa, ioim->iotag);
+ bfa_trc_fp(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_COMP_GOOD:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe,
+ __bfa_cb_ioim_good_comp, ioim);
+ break;
+
+ case BFA_IOIM_SM_COMP:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_comp,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_DONE:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_comp,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_ABORT:
+ ioim->iosp->abort_explicit = BFA_TRUE;
+ ioim->io_cbfn = __bfa_cb_ioim_abort;
+
+ if (bfa_ioim_send_abort(ioim))
+ bfa_sm_set_state(ioim, bfa_ioim_sm_abort);
+ else {
+ bfa_sm_set_state(ioim, bfa_ioim_sm_abort_qfull);
+ bfa_reqq_wait(ioim->bfa, ioim->itnim->reqq,
+ &ioim->iosp->reqq_wait);
+ }
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ ioim->iosp->abort_explicit = BFA_FALSE;
+ ioim->io_cbfn = __bfa_cb_ioim_failed;
+
+ if (bfa_ioim_send_abort(ioim))
+ bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup);
+ else {
+ bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup_qfull);
+ bfa_reqq_wait(ioim->bfa, ioim->itnim->reqq,
+ &ioim->iosp->reqq_wait);
+ }
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IO is being aborted, waiting for completion from firmware.
+ */
+static void
+bfa_ioim_sm_abort(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_COMP_GOOD:
+ case BFA_IOIM_SM_COMP:
+ case BFA_IOIM_SM_DONE:
+ case BFA_IOIM_SM_FREE:
+ break;
+
+ case BFA_IOIM_SM_ABORT_DONE:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_ABORT_COMP:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_COMP_UTAG:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ bfa_assert(ioim->iosp->abort_explicit == BFA_TRUE);
+ ioim->iosp->abort_explicit = BFA_FALSE;
+
+ if (bfa_ioim_send_abort(ioim))
+ bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup);
+ else {
+ bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup_qfull);
+ bfa_reqq_wait(ioim->bfa, ioim->itnim->reqq,
+ &ioim->iosp->reqq_wait);
+ }
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IO is being cleaned up (implicit abort), waiting for completion from
+ * firmware.
+ */
+static void
+bfa_ioim_sm_cleanup(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_COMP_GOOD:
+ case BFA_IOIM_SM_COMP:
+ case BFA_IOIM_SM_DONE:
+ case BFA_IOIM_SM_FREE:
+ break;
+
+ case BFA_IOIM_SM_ABORT:
+ /**
+ * IO is already being aborted implicitly
+ */
+ ioim->io_cbfn = __bfa_cb_ioim_abort;
+ break;
+
+ case BFA_IOIM_SM_ABORT_DONE:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_ABORT_COMP:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_COMP_UTAG:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ /**
+ * IO can be in cleanup state already due to TM command. 2nd cleanup
+ * request comes from ITN offline event.
+ */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IO is waiting for room in request CQ
+ */
+static void
+bfa_ioim_sm_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_QRESUME:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_active);
+ bfa_ioim_send_ioreq(ioim);
+ break;
+
+ case BFA_IOIM_SM_ABORT:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Active IO is being aborted, waiting for room in request CQ.
+ */
+static void
+bfa_ioim_sm_abort_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_QRESUME:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_abort);
+ bfa_ioim_send_abort(ioim);
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ bfa_assert(ioim->iosp->abort_explicit == BFA_TRUE);
+ ioim->iosp->abort_explicit = BFA_FALSE;
+ bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup_qfull);
+ break;
+
+ case BFA_IOIM_SM_COMP_GOOD:
+ case BFA_IOIM_SM_COMP:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_DONE:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_abort,
+ ioim);
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Active IO is being cleaned up, waiting for room in request CQ.
+ */
+static void
+bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_QRESUME:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_cleanup);
+ bfa_ioim_send_abort(ioim);
+ break;
+
+ case BFA_IOIM_SM_ABORT:
+ /**
+ * IO is alraedy being cleaned up implicitly
+ */
+ ioim->io_cbfn = __bfa_cb_ioim_abort;
+ break;
+
+ case BFA_IOIM_SM_COMP_GOOD:
+ case BFA_IOIM_SM_COMP:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_DONE:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb_free);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ bfa_reqq_wcancel(&ioim->iosp->reqq_wait);
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, __bfa_cb_ioim_failed,
+ ioim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IO bfa callback is pending.
+ */
+static void
+bfa_ioim_sm_hcb(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc_fp(ioim->bfa, ioim->iotag);
+ bfa_trc_fp(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_HCB:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_uninit);
+ bfa_ioim_free(ioim);
+ bfa_cb_ioim_resfree(ioim->bfa->bfad);
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IO bfa callback is pending. IO resource cannot be freed.
+ */
+static void
+bfa_ioim_sm_hcb_free(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_HCB:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_resfree);
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe, &ioim->fcpim->ioim_resfree_q);
+ break;
+
+ case BFA_IOIM_SM_FREE:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_hcb);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IO is completed, waiting resource free from firmware.
+ */
+static void
+bfa_ioim_sm_resfree(struct bfa_ioim_s *ioim, enum bfa_ioim_event event)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, event);
+
+ switch (event) {
+ case BFA_IOIM_SM_FREE:
+ bfa_sm_set_state(ioim, bfa_ioim_sm_uninit);
+ bfa_ioim_free(ioim);
+ bfa_cb_ioim_resfree(ioim->bfa->bfad);
+ break;
+
+ case BFA_IOIM_SM_CLEANUP:
+ bfa_ioim_notify_cleanup(ioim);
+ break;
+
+ case BFA_IOIM_SM_HWFAIL:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * bfa_ioim_private
+ */
+
+static void
+__bfa_cb_ioim_good_comp(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_ioim_s *ioim = cbarg;
+
+ if (!complete) {
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+ return;
+ }
+
+ bfa_cb_ioim_good_comp(ioim->bfa->bfad, ioim->dio);
+}
+
+static void
+__bfa_cb_ioim_comp(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_ioim_s *ioim = cbarg;
+ struct bfi_ioim_rsp_s *m;
+ u8 *snsinfo = NULL;
+ u8 sns_len = 0;
+ s32 residue = 0;
+
+ if (!complete) {
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+ return;
+ }
+
+ m = (struct bfi_ioim_rsp_s *) &ioim->iosp->comp_rspmsg;
+ if (m->io_status == BFI_IOIM_STS_OK) {
+ /**
+ * setup sense information, if present
+ */
+ if (m->scsi_status == SCSI_STATUS_CHECK_CONDITION
+ && m->sns_len) {
+ sns_len = m->sns_len;
+ snsinfo = ioim->iosp->snsinfo;
+ }
+
+ /**
+ * setup residue value correctly for normal completions
+ */
+ if (m->resid_flags == FCP_RESID_UNDER)
+ residue = bfa_os_ntohl(m->residue);
+ if (m->resid_flags == FCP_RESID_OVER) {
+ residue = bfa_os_ntohl(m->residue);
+ residue = -residue;
+ }
+ }
+
+ bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, m->io_status,
+ m->scsi_status, sns_len, snsinfo, residue);
+}
+
+static void
+__bfa_cb_ioim_failed(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_ioim_s *ioim = cbarg;
+
+ if (!complete) {
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+ return;
+ }
+
+ bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_ABORTED,
+ 0, 0, NULL, 0);
+}
+
+static void
+__bfa_cb_ioim_pathtov(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_ioim_s *ioim = cbarg;
+
+ if (!complete) {
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+ return;
+ }
+
+ bfa_cb_ioim_done(ioim->bfa->bfad, ioim->dio, BFI_IOIM_STS_PATHTOV,
+ 0, 0, NULL, 0);
+}
+
+static void
+__bfa_cb_ioim_abort(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_ioim_s *ioim = cbarg;
+
+ if (!complete) {
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_HCB);
+ return;
+ }
+
+ bfa_cb_ioim_abort(ioim->bfa->bfad, ioim->dio);
+}
+
+static void
+bfa_ioim_sgpg_alloced(void *cbarg)
+{
+ struct bfa_ioim_s *ioim = cbarg;
+
+ ioim->nsgpgs = BFA_SGPG_NPAGE(ioim->nsges);
+ list_splice_tail_init(&ioim->iosp->sgpg_wqe.sgpg_q, &ioim->sgpg_q);
+ bfa_ioim_sgpg_setup(ioim);
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_SGALLOCED);
+}
+
+/**
+ * Send I/O request to firmware.
+ */
+static bfa_boolean_t
+bfa_ioim_send_ioreq(struct bfa_ioim_s *ioim)
+{
+ struct bfa_itnim_s *itnim = ioim->itnim;
+ struct bfi_ioim_req_s *m;
+ static struct fcp_cmnd_s cmnd_z0 = { 0 };
+ struct bfi_sge_s *sge;
+ u32 pgdlen = 0;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(ioim->bfa, itnim->reqq);
+ if (!m) {
+ bfa_reqq_wait(ioim->bfa, ioim->itnim->reqq,
+ &ioim->iosp->reqq_wait);
+ return BFA_FALSE;
+ }
+
+ /**
+ * build i/o request message next
+ */
+ m->io_tag = bfa_os_htons(ioim->iotag);
+ m->rport_hdl = ioim->itnim->rport->fw_handle;
+ m->io_timeout = bfa_cb_ioim_get_timeout(ioim->dio);
+
+ /**
+ * build inline IO SG element here
+ */
+ sge = &m->sges[0];
+ if (ioim->nsges) {
+ sge->sga = bfa_cb_ioim_get_sgaddr(ioim->dio, 0);
+ pgdlen = bfa_cb_ioim_get_sglen(ioim->dio, 0);
+ sge->sg_len = pgdlen;
+ sge->flags = (ioim->nsges > BFI_SGE_INLINE) ?
+ BFI_SGE_DATA_CPL : BFI_SGE_DATA_LAST;
+ bfa_sge_to_be(sge);
+ sge++;
+ }
+
+ if (ioim->nsges > BFI_SGE_INLINE) {
+ sge->sga = ioim->sgpg->sgpg_pa;
+ } else {
+ sge->sga.a32.addr_lo = 0;
+ sge->sga.a32.addr_hi = 0;
+ }
+ sge->sg_len = pgdlen;
+ sge->flags = BFI_SGE_PGDLEN;
+ bfa_sge_to_be(sge);
+
+ /**
+ * set up I/O command parameters
+ */
+ bfa_os_assign(m->cmnd, cmnd_z0);
+ m->cmnd.lun = bfa_cb_ioim_get_lun(ioim->dio);
+ m->cmnd.iodir = bfa_cb_ioim_get_iodir(ioim->dio);
+ bfa_os_assign(m->cmnd.cdb,
+ *(struct scsi_cdb_s *)bfa_cb_ioim_get_cdb(ioim->dio));
+ m->cmnd.fcp_dl = bfa_os_htonl(bfa_cb_ioim_get_size(ioim->dio));
+
+ /**
+ * set up I/O message header
+ */
+ switch (m->cmnd.iodir) {
+ case FCP_IODIR_READ:
+ bfi_h2i_set(m->mh, BFI_MC_IOIM_READ, 0, bfa_lpuid(ioim->bfa));
+ bfa_stats(itnim, input_reqs);
+ break;
+ case FCP_IODIR_WRITE:
+ bfi_h2i_set(m->mh, BFI_MC_IOIM_WRITE, 0, bfa_lpuid(ioim->bfa));
+ bfa_stats(itnim, output_reqs);
+ break;
+ case FCP_IODIR_RW:
+ bfa_stats(itnim, input_reqs);
+ bfa_stats(itnim, output_reqs);
+ default:
+ bfi_h2i_set(m->mh, BFI_MC_IOIM_IO, 0, bfa_lpuid(ioim->bfa));
+ }
+ if (itnim->seq_rec ||
+ (bfa_cb_ioim_get_size(ioim->dio) & (sizeof(u32) - 1)))
+ bfi_h2i_set(m->mh, BFI_MC_IOIM_IO, 0, bfa_lpuid(ioim->bfa));
+
+#ifdef IOIM_ADVANCED
+ m->cmnd.crn = bfa_cb_ioim_get_crn(ioim->dio);
+ m->cmnd.priority = bfa_cb_ioim_get_priority(ioim->dio);
+ m->cmnd.taskattr = bfa_cb_ioim_get_taskattr(ioim->dio);
+
+ /**
+ * Handle large CDB (>16 bytes).
+ */
+ m->cmnd.addl_cdb_len = (bfa_cb_ioim_get_cdblen(ioim->dio) -
+ FCP_CMND_CDB_LEN) / sizeof(u32);
+ if (m->cmnd.addl_cdb_len) {
+ bfa_os_memcpy(&m->cmnd.cdb + 1, (struct scsi_cdb_s *)
+ bfa_cb_ioim_get_cdb(ioim->dio) + 1,
+ m->cmnd.addl_cdb_len * sizeof(u32));
+ fcp_cmnd_fcpdl(&m->cmnd) =
+ bfa_os_htonl(bfa_cb_ioim_get_size(ioim->dio));
+ }
+#endif
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(ioim->bfa, itnim->reqq);
+ return BFA_TRUE;
+}
+
+/**
+ * Setup any additional SG pages needed.Inline SG element is setup
+ * at queuing time.
+ */
+static bfa_boolean_t
+bfa_ioim_sge_setup(struct bfa_ioim_s *ioim)
+{
+ u16 nsgpgs;
+
+ bfa_assert(ioim->nsges > BFI_SGE_INLINE);
+
+ /**
+ * allocate SG pages needed
+ */
+ nsgpgs = BFA_SGPG_NPAGE(ioim->nsges);
+ if (!nsgpgs)
+ return BFA_TRUE;
+
+ if (bfa_sgpg_malloc(ioim->bfa, &ioim->sgpg_q, nsgpgs)
+ != BFA_STATUS_OK) {
+ bfa_sgpg_wait(ioim->bfa, &ioim->iosp->sgpg_wqe, nsgpgs);
+ return BFA_FALSE;
+ }
+
+ ioim->nsgpgs = nsgpgs;
+ bfa_ioim_sgpg_setup(ioim);
+
+ return BFA_TRUE;
+}
+
+static void
+bfa_ioim_sgpg_setup(struct bfa_ioim_s *ioim)
+{
+ int sgeid, nsges, i;
+ struct bfi_sge_s *sge;
+ struct bfa_sgpg_s *sgpg;
+ u32 pgcumsz;
+
+ sgeid = BFI_SGE_INLINE;
+ ioim->sgpg = sgpg = bfa_q_first(&ioim->sgpg_q);
+
+ do {
+ sge = sgpg->sgpg->sges;
+ nsges = ioim->nsges - sgeid;
+ if (nsges > BFI_SGPG_DATA_SGES)
+ nsges = BFI_SGPG_DATA_SGES;
+
+ pgcumsz = 0;
+ for (i = 0; i < nsges; i++, sge++, sgeid++) {
+ sge->sga = bfa_cb_ioim_get_sgaddr(ioim->dio, sgeid);
+ sge->sg_len = bfa_cb_ioim_get_sglen(ioim->dio, sgeid);
+ pgcumsz += sge->sg_len;
+
+ /**
+ * set flags
+ */
+ if (i < (nsges - 1))
+ sge->flags = BFI_SGE_DATA;
+ else if (sgeid < (ioim->nsges - 1))
+ sge->flags = BFI_SGE_DATA_CPL;
+ else
+ sge->flags = BFI_SGE_DATA_LAST;
+ }
+
+ sgpg = (struct bfa_sgpg_s *) bfa_q_next(sgpg);
+
+ /**
+ * set the link element of each page
+ */
+ if (sgeid == ioim->nsges) {
+ sge->flags = BFI_SGE_PGDLEN;
+ sge->sga.a32.addr_lo = 0;
+ sge->sga.a32.addr_hi = 0;
+ } else {
+ sge->flags = BFI_SGE_LINK;
+ sge->sga = sgpg->sgpg_pa;
+ }
+ sge->sg_len = pgcumsz;
+ } while (sgeid < ioim->nsges);
+}
+
+/**
+ * Send I/O abort request to firmware.
+ */
+static bfa_boolean_t
+bfa_ioim_send_abort(struct bfa_ioim_s *ioim)
+{
+ struct bfa_itnim_s *itnim = ioim->itnim;
+ struct bfi_ioim_abort_req_s *m;
+ enum bfi_ioim_h2i msgop;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(ioim->bfa, itnim->reqq);
+ if (!m)
+ return BFA_FALSE;
+
+ /**
+ * build i/o request message next
+ */
+ if (ioim->iosp->abort_explicit)
+ msgop = BFI_IOIM_H2I_IOABORT_REQ;
+ else
+ msgop = BFI_IOIM_H2I_IOCLEANUP_REQ;
+
+ bfi_h2i_set(m->mh, BFI_MC_IOIM, msgop, bfa_lpuid(ioim->bfa));
+ m->io_tag = bfa_os_htons(ioim->iotag);
+ m->abort_tag = ++ioim->abort_tag;
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(ioim->bfa, itnim->reqq);
+ return BFA_TRUE;
+}
+
+/**
+ * Call to resume any I/O requests waiting for room in request queue.
+ */
+static void
+bfa_ioim_qresume(void *cbarg)
+{
+ struct bfa_ioim_s *ioim = cbarg;
+
+ bfa_fcpim_stats(ioim->fcpim, qresumes);
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_QRESUME);
+}
+
+
+static void
+bfa_ioim_notify_cleanup(struct bfa_ioim_s *ioim)
+{
+ /**
+ * Move IO from itnim queue to fcpim global queue since itnim will be
+ * freed.
+ */
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
+
+ if (!ioim->iosp->tskim) {
+ if (ioim->fcpim->delay_comp && ioim->itnim->iotov_active) {
+ bfa_cb_dequeue(&ioim->hcb_qe);
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe, &ioim->itnim->delay_comp_q);
+ }
+ bfa_itnim_iodone(ioim->itnim);
+ } else
+ bfa_tskim_iodone(ioim->iosp->tskim);
+}
+
+/**
+ * or after the link comes back.
+ */
+void
+bfa_ioim_delayed_comp(struct bfa_ioim_s *ioim, bfa_boolean_t iotov)
+{
+ /**
+ * If path tov timer expired, failback with PATHTOV status - these
+ * IO requests are not normally retried by IO stack.
+ *
+ * Otherwise device cameback online and fail it with normal failed
+ * status so that IO stack retries these failed IO requests.
+ */
+ if (iotov)
+ ioim->io_cbfn = __bfa_cb_ioim_pathtov;
+ else
+ ioim->io_cbfn = __bfa_cb_ioim_failed;
+
+ bfa_cb_queue(ioim->bfa, &ioim->hcb_qe, ioim->io_cbfn, ioim);
+
+ /**
+ * Move IO to fcpim global queue since itnim will be
+ * freed.
+ */
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
+}
+
+
+
+/**
+ * bfa_ioim_friend
+ */
+
+/**
+ * Memory allocation and initialization.
+ */
+void
+bfa_ioim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
+{
+ struct bfa_ioim_s *ioim;
+ struct bfa_ioim_sp_s *iosp;
+ u16 i;
+ u8 *snsinfo;
+ u32 snsbufsz;
+
+ /**
+ * claim memory first
+ */
+ ioim = (struct bfa_ioim_s *) bfa_meminfo_kva(minfo);
+ fcpim->ioim_arr = ioim;
+ bfa_meminfo_kva(minfo) = (u8 *) (ioim + fcpim->num_ioim_reqs);
+
+ iosp = (struct bfa_ioim_sp_s *) bfa_meminfo_kva(minfo);
+ fcpim->ioim_sp_arr = iosp;
+ bfa_meminfo_kva(minfo) = (u8 *) (iosp + fcpim->num_ioim_reqs);
+
+ /**
+ * Claim DMA memory for per IO sense data.
+ */
+ snsbufsz = fcpim->num_ioim_reqs * BFI_IOIM_SNSLEN;
+ fcpim->snsbase.pa = bfa_meminfo_dma_phys(minfo);
+ bfa_meminfo_dma_phys(minfo) += snsbufsz;
+
+ fcpim->snsbase.kva = bfa_meminfo_dma_virt(minfo);
+ bfa_meminfo_dma_virt(minfo) += snsbufsz;
+ snsinfo = fcpim->snsbase.kva;
+ bfa_iocfc_set_snsbase(fcpim->bfa, fcpim->snsbase.pa);
+
+ /**
+ * Initialize ioim free queues
+ */
+ INIT_LIST_HEAD(&fcpim->ioim_free_q);
+ INIT_LIST_HEAD(&fcpim->ioim_resfree_q);
+ INIT_LIST_HEAD(&fcpim->ioim_comp_q);
+
+ for (i = 0; i < fcpim->num_ioim_reqs;
+ i++, ioim++, iosp++, snsinfo += BFI_IOIM_SNSLEN) {
+ /*
+ * initialize IOIM
+ */
+ bfa_os_memset(ioim, 0, sizeof(struct bfa_ioim_s));
+ ioim->iotag = i;
+ ioim->bfa = fcpim->bfa;
+ ioim->fcpim = fcpim;
+ ioim->iosp = iosp;
+ iosp->snsinfo = snsinfo;
+ INIT_LIST_HEAD(&ioim->sgpg_q);
+ bfa_reqq_winit(&ioim->iosp->reqq_wait,
+ bfa_ioim_qresume, ioim);
+ bfa_sgpg_winit(&ioim->iosp->sgpg_wqe,
+ bfa_ioim_sgpg_alloced, ioim);
+ bfa_sm_set_state(ioim, bfa_ioim_sm_uninit);
+
+ list_add_tail(&ioim->qe, &fcpim->ioim_free_q);
+ }
+}
+
+/**
+ * Driver detach time call.
+ */
+void
+bfa_ioim_detach(struct bfa_fcpim_mod_s *fcpim)
+{
+}
+
+void
+bfa_ioim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+ struct bfi_ioim_rsp_s *rsp = (struct bfi_ioim_rsp_s *) m;
+ struct bfa_ioim_s *ioim;
+ u16 iotag;
+ enum bfa_ioim_event evt = BFA_IOIM_SM_COMP;
+
+ iotag = bfa_os_ntohs(rsp->io_tag);
+
+ ioim = BFA_IOIM_FROM_TAG(fcpim, iotag);
+ bfa_assert(ioim->iotag == iotag);
+
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_trc(ioim->bfa, rsp->io_status);
+ bfa_trc(ioim->bfa, rsp->reuse_io_tag);
+
+ if (bfa_sm_cmp_state(ioim, bfa_ioim_sm_active))
+ bfa_os_assign(ioim->iosp->comp_rspmsg, *m);
+
+ switch (rsp->io_status) {
+ case BFI_IOIM_STS_OK:
+ bfa_fcpim_stats(fcpim, iocomp_ok);
+ if (rsp->reuse_io_tag == 0)
+ evt = BFA_IOIM_SM_DONE;
+ else
+ evt = BFA_IOIM_SM_COMP;
+ break;
+
+ case BFI_IOIM_STS_TIMEDOUT:
+ case BFI_IOIM_STS_ABORTED:
+ rsp->io_status = BFI_IOIM_STS_ABORTED;
+ bfa_fcpim_stats(fcpim, iocomp_aborted);
+ if (rsp->reuse_io_tag == 0)
+ evt = BFA_IOIM_SM_DONE;
+ else
+ evt = BFA_IOIM_SM_COMP;
+ break;
+
+ case BFI_IOIM_STS_PROTO_ERR:
+ bfa_fcpim_stats(fcpim, iocom_proto_err);
+ bfa_assert(rsp->reuse_io_tag);
+ evt = BFA_IOIM_SM_COMP;
+ break;
+
+ case BFI_IOIM_STS_SQER_NEEDED:
+ bfa_fcpim_stats(fcpim, iocom_sqer_needed);
+ bfa_assert(rsp->reuse_io_tag == 0);
+ evt = BFA_IOIM_SM_SQRETRY;
+ break;
+
+ case BFI_IOIM_STS_RES_FREE:
+ bfa_fcpim_stats(fcpim, iocom_res_free);
+ evt = BFA_IOIM_SM_FREE;
+ break;
+
+ case BFI_IOIM_STS_HOST_ABORTED:
+ bfa_fcpim_stats(fcpim, iocom_hostabrts);
+ if (rsp->abort_tag != ioim->abort_tag) {
+ bfa_trc(ioim->bfa, rsp->abort_tag);
+ bfa_trc(ioim->bfa, ioim->abort_tag);
+ return;
+ }
+
+ if (rsp->reuse_io_tag)
+ evt = BFA_IOIM_SM_ABORT_COMP;
+ else
+ evt = BFA_IOIM_SM_ABORT_DONE;
+ break;
+
+ case BFI_IOIM_STS_UTAG:
+ bfa_fcpim_stats(fcpim, iocom_utags);
+ evt = BFA_IOIM_SM_COMP_UTAG;
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+
+ bfa_sm_send_event(ioim, evt);
+}
+
+void
+bfa_ioim_good_comp_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+ struct bfi_ioim_rsp_s *rsp = (struct bfi_ioim_rsp_s *) m;
+ struct bfa_ioim_s *ioim;
+ u16 iotag;
+
+ iotag = bfa_os_ntohs(rsp->io_tag);
+
+ ioim = BFA_IOIM_FROM_TAG(fcpim, iotag);
+ bfa_assert(ioim->iotag == iotag);
+
+ bfa_trc_fp(ioim->bfa, ioim->iotag);
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_COMP_GOOD);
+}
+
+/**
+ * Called by itnim to clean up IO while going offline.
+ */
+void
+bfa_ioim_cleanup(struct bfa_ioim_s *ioim)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_fcpim_stats(ioim->fcpim, io_cleanups);
+
+ ioim->iosp->tskim = NULL;
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_CLEANUP);
+}
+
+void
+bfa_ioim_cleanup_tm(struct bfa_ioim_s *ioim, struct bfa_tskim_s *tskim)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_fcpim_stats(ioim->fcpim, io_tmaborts);
+
+ ioim->iosp->tskim = tskim;
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_CLEANUP);
+}
+
+/**
+ * IOC failure handling.
+ */
+void
+bfa_ioim_iocdisable(struct bfa_ioim_s *ioim)
+{
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_HWFAIL);
+}
+
+/**
+ * IO offline TOV popped. Fail the pending IO.
+ */
+void
+bfa_ioim_tov(struct bfa_ioim_s *ioim)
+{
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_IOTOV);
+}
+
+
+
+/**
+ * bfa_ioim_api
+ */
+
+/**
+ * Allocate IOIM resource for initiator mode I/O request.
+ */
+struct bfa_ioim_s *
+bfa_ioim_alloc(struct bfa_s *bfa, struct bfad_ioim_s *dio,
+ struct bfa_itnim_s *itnim, u16 nsges)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+ struct bfa_ioim_s *ioim;
+
+ /**
+ * alocate IOIM resource
+ */
+ bfa_q_deq(&fcpim->ioim_free_q, &ioim);
+ if (!ioim) {
+ bfa_fcpim_stats(fcpim, no_iotags);
+ return NULL;
+ }
+
+ ioim->dio = dio;
+ ioim->itnim = itnim;
+ ioim->nsges = nsges;
+ ioim->nsgpgs = 0;
+
+ bfa_stats(fcpim, total_ios);
+ bfa_stats(itnim, ios);
+ fcpim->ios_active++;
+
+ list_add_tail(&ioim->qe, &itnim->io_q);
+ bfa_trc_fp(ioim->bfa, ioim->iotag);
+
+ return ioim;
+}
+
+void
+bfa_ioim_free(struct bfa_ioim_s *ioim)
+{
+ struct bfa_fcpim_mod_s *fcpim = ioim->fcpim;
+
+ bfa_trc_fp(ioim->bfa, ioim->iotag);
+ bfa_assert_fp(bfa_sm_cmp_state(ioim, bfa_ioim_sm_uninit));
+
+ bfa_assert_fp(list_empty(&ioim->sgpg_q)
+ || (ioim->nsges > BFI_SGE_INLINE));
+
+ if (ioim->nsgpgs > 0)
+ bfa_sgpg_mfree(ioim->bfa, &ioim->sgpg_q, ioim->nsgpgs);
+
+ bfa_stats(ioim->itnim, io_comps);
+ fcpim->ios_active--;
+
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe, &fcpim->ioim_free_q);
+}
+
+void
+bfa_ioim_start(struct bfa_ioim_s *ioim)
+{
+ bfa_trc_fp(ioim->bfa, ioim->iotag);
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_START);
+}
+
+/**
+ * Driver I/O abort request.
+ */
+void
+bfa_ioim_abort(struct bfa_ioim_s *ioim)
+{
+ bfa_trc(ioim->bfa, ioim->iotag);
+ bfa_fcpim_stats(ioim->fcpim, io_aborts);
+ bfa_sm_send_event(ioim, BFA_IOIM_SM_ABORT);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_fcpim.h>
+#include "bfa_fcpim_priv.h"
+
+BFA_TRC_FILE(HAL, ITNIM);
+
+#define BFA_ITNIM_FROM_TAG(_fcpim, _tag) \
+ ((_fcpim)->itnim_arr + ((_tag) & ((_fcpim)->num_itnims - 1)))
+
+#define bfa_fcpim_additn(__itnim) \
+ list_add_tail(&(__itnim)->qe, &(__itnim)->fcpim->itnim_q)
+#define bfa_fcpim_delitn(__itnim) do { \
+ bfa_assert(bfa_q_is_on_q(&(__itnim)->fcpim->itnim_q, __itnim)); \
+ list_del(&(__itnim)->qe); \
+ bfa_assert(list_empty(&(__itnim)->io_q)); \
+ bfa_assert(list_empty(&(__itnim)->io_cleanup_q)); \
+ bfa_assert(list_empty(&(__itnim)->pending_q)); \
+} while (0)
+
+#define bfa_itnim_online_cb(__itnim) do { \
+ if ((__itnim)->bfa->fcs) \
+ bfa_cb_itnim_online((__itnim)->ditn); \
+ else { \
+ bfa_cb_queue((__itnim)->bfa, &(__itnim)->hcb_qe, \
+ __bfa_cb_itnim_online, (__itnim)); \
+ } \
+} while (0)
+
+#define bfa_itnim_offline_cb(__itnim) do { \
+ if ((__itnim)->bfa->fcs) \
+ bfa_cb_itnim_offline((__itnim)->ditn); \
+ else { \
+ bfa_cb_queue((__itnim)->bfa, &(__itnim)->hcb_qe, \
+ __bfa_cb_itnim_offline, (__itnim)); \
+ } \
+} while (0)
+
+#define bfa_itnim_sler_cb(__itnim) do { \
+ if ((__itnim)->bfa->fcs) \
+ bfa_cb_itnim_sler((__itnim)->ditn); \
+ else { \
+ bfa_cb_queue((__itnim)->bfa, &(__itnim)->hcb_qe, \
+ __bfa_cb_itnim_sler, (__itnim)); \
+ } \
+} while (0)
+
+/*
+ * forward declarations
+ */
+static void bfa_itnim_iocdisable_cleanup(struct bfa_itnim_s *itnim);
+static bfa_boolean_t bfa_itnim_send_fwcreate(struct bfa_itnim_s *itnim);
+static bfa_boolean_t bfa_itnim_send_fwdelete(struct bfa_itnim_s *itnim);
+static void bfa_itnim_cleanp_comp(void *itnim_cbarg);
+static void bfa_itnim_cleanup(struct bfa_itnim_s *itnim);
+static void __bfa_cb_itnim_online(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_itnim_offline(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_itnim_sler(void *cbarg, bfa_boolean_t complete);
+static void bfa_itnim_iotov_online(struct bfa_itnim_s *itnim);
+static void bfa_itnim_iotov_cleanup(struct bfa_itnim_s *itnim);
+static void bfa_itnim_iotov(void *itnim_arg);
+static void bfa_itnim_iotov_start(struct bfa_itnim_s *itnim);
+static void bfa_itnim_iotov_stop(struct bfa_itnim_s *itnim);
+static void bfa_itnim_iotov_delete(struct bfa_itnim_s *itnim);
+
+/**
+ * bfa_itnim_sm BFA itnim state machine
+ */
+
+
+enum bfa_itnim_event {
+ BFA_ITNIM_SM_CREATE = 1, /* itnim is created */
+ BFA_ITNIM_SM_ONLINE = 2, /* itnim is online */
+ BFA_ITNIM_SM_OFFLINE = 3, /* itnim is offline */
+ BFA_ITNIM_SM_FWRSP = 4, /* firmware response */
+ BFA_ITNIM_SM_DELETE = 5, /* deleting an existing itnim */
+ BFA_ITNIM_SM_CLEANUP = 6, /* IO cleanup completion */
+ BFA_ITNIM_SM_SLER = 7, /* second level error recovery */
+ BFA_ITNIM_SM_HWFAIL = 8, /* IOC h/w failure event */
+ BFA_ITNIM_SM_QRESUME = 9, /* queue space available */
+};
+
+static void bfa_itnim_sm_uninit(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_created(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_fwcreate(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_delete_pending(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_online(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_sler(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_cleanup_offline(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_cleanup_delete(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_fwdelete(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_offline(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_iocdisable(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_deleting(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_fwcreate_qfull(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_fwdelete_qfull(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+static void bfa_itnim_sm_deleting_qfull(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event);
+
+/**
+ * Beginning/unallocated state - no events expected.
+ */
+static void
+bfa_itnim_sm_uninit(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_CREATE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_created);
+ itnim->is_online = BFA_FALSE;
+ bfa_fcpim_additn(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Beginning state, only online event expected.
+ */
+static void
+bfa_itnim_sm_created(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_ONLINE:
+ if (bfa_itnim_send_fwcreate(itnim))
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate);
+ else
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate_qfull);
+ break;
+
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+ bfa_fcpim_delitn(itnim);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Waiting for itnim create response from firmware.
+ */
+static void
+bfa_itnim_sm_fwcreate(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_FWRSP:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_online);
+ itnim->is_online = BFA_TRUE;
+ bfa_itnim_iotov_online(itnim);
+ bfa_itnim_online_cb(itnim);
+ break;
+
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_delete_pending);
+ break;
+
+ case BFA_ITNIM_SM_OFFLINE:
+ if (bfa_itnim_send_fwdelete(itnim))
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete);
+ else
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete_qfull);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_itnim_sm_fwcreate_qfull(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_QRESUME:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate);
+ bfa_itnim_send_fwcreate(itnim);
+ break;
+
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+ bfa_reqq_wcancel(&itnim->reqq_wait);
+ bfa_fcpim_delitn(itnim);
+ break;
+
+ case BFA_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_offline);
+ bfa_reqq_wcancel(&itnim->reqq_wait);
+ bfa_itnim_offline_cb(itnim);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ bfa_reqq_wcancel(&itnim->reqq_wait);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Waiting for itnim create response from firmware, a delete is pending.
+ */
+static void
+bfa_itnim_sm_delete_pending(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_FWRSP:
+ if (bfa_itnim_send_fwdelete(itnim))
+ bfa_sm_set_state(itnim, bfa_itnim_sm_deleting);
+ else
+ bfa_sm_set_state(itnim, bfa_itnim_sm_deleting_qfull);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+ bfa_fcpim_delitn(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Online state - normal parking state.
+ */
+static void
+bfa_itnim_sm_online(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_offline);
+ itnim->is_online = BFA_FALSE;
+ bfa_itnim_iotov_start(itnim);
+ bfa_itnim_cleanup(itnim);
+ break;
+
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_delete);
+ itnim->is_online = BFA_FALSE;
+ bfa_itnim_cleanup(itnim);
+ break;
+
+ case BFA_ITNIM_SM_SLER:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_sler);
+ itnim->is_online = BFA_FALSE;
+ bfa_itnim_iotov_start(itnim);
+ bfa_itnim_sler_cb(itnim);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ itnim->is_online = BFA_FALSE;
+ bfa_itnim_iotov_start(itnim);
+ bfa_itnim_iocdisable_cleanup(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Second level error recovery need.
+ */
+static void
+bfa_itnim_sm_sler(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_offline);
+ bfa_itnim_cleanup(itnim);
+ break;
+
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_delete);
+ bfa_itnim_cleanup(itnim);
+ bfa_itnim_iotov_delete(itnim);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ bfa_itnim_iocdisable_cleanup(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Going offline. Waiting for active IO cleanup.
+ */
+static void
+bfa_itnim_sm_cleanup_offline(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_CLEANUP:
+ if (bfa_itnim_send_fwdelete(itnim))
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete);
+ else
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete_qfull);
+ break;
+
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_cleanup_delete);
+ bfa_itnim_iotov_delete(itnim);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ bfa_itnim_iocdisable_cleanup(itnim);
+ bfa_itnim_offline_cb(itnim);
+ break;
+
+ case BFA_ITNIM_SM_SLER:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Deleting itnim. Waiting for active IO cleanup.
+ */
+static void
+bfa_itnim_sm_cleanup_delete(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_CLEANUP:
+ if (bfa_itnim_send_fwdelete(itnim))
+ bfa_sm_set_state(itnim, bfa_itnim_sm_deleting);
+ else
+ bfa_sm_set_state(itnim, bfa_itnim_sm_deleting_qfull);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ bfa_itnim_iocdisable_cleanup(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport offline. Fimrware itnim is being deleted - awaiting f/w response.
+ */
+static void
+bfa_itnim_sm_fwdelete(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_FWRSP:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_offline);
+ bfa_itnim_offline_cb(itnim);
+ break;
+
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_deleting);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ bfa_itnim_offline_cb(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_itnim_sm_fwdelete_qfull(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_QRESUME:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwdelete);
+ bfa_itnim_send_fwdelete(itnim);
+ break;
+
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_deleting_qfull);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ bfa_reqq_wcancel(&itnim->reqq_wait);
+ bfa_itnim_offline_cb(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Offline state.
+ */
+static void
+bfa_itnim_sm_offline(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+ bfa_itnim_iotov_delete(itnim);
+ bfa_fcpim_delitn(itnim);
+ break;
+
+ case BFA_ITNIM_SM_ONLINE:
+ if (bfa_itnim_send_fwcreate(itnim))
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate);
+ else
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate_qfull);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_iocdisable);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IOC h/w failed state.
+ */
+static void
+bfa_itnim_sm_iocdisable(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+ bfa_itnim_iotov_delete(itnim);
+ bfa_fcpim_delitn(itnim);
+ break;
+
+ case BFA_ITNIM_SM_OFFLINE:
+ bfa_itnim_offline_cb(itnim);
+ break;
+
+ case BFA_ITNIM_SM_ONLINE:
+ if (bfa_itnim_send_fwcreate(itnim))
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate);
+ else
+ bfa_sm_set_state(itnim, bfa_itnim_sm_fwcreate_qfull);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Itnim is deleted, waiting for firmware response to delete.
+ */
+static void
+bfa_itnim_sm_deleting(struct bfa_itnim_s *itnim, enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_FWRSP:
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+ bfa_fcpim_delitn(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_itnim_sm_deleting_qfull(struct bfa_itnim_s *itnim,
+ enum bfa_itnim_event event)
+{
+ bfa_trc(itnim->bfa, itnim->rport->rport_tag);
+ bfa_trc(itnim->bfa, event);
+
+ switch (event) {
+ case BFA_ITNIM_SM_QRESUME:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_deleting);
+ bfa_itnim_send_fwdelete(itnim);
+ break;
+
+ case BFA_ITNIM_SM_HWFAIL:
+ bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+ bfa_reqq_wcancel(&itnim->reqq_wait);
+ bfa_fcpim_delitn(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * bfa_itnim_private
+ */
+
+/**
+ * Initiate cleanup of all IOs on an IOC failure.
+ */
+static void
+bfa_itnim_iocdisable_cleanup(struct bfa_itnim_s *itnim)
+{
+ struct bfa_tskim_s *tskim;
+ struct bfa_ioim_s *ioim;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &itnim->tsk_q) {
+ tskim = (struct bfa_tskim_s *) qe;
+ bfa_tskim_iocdisable(tskim);
+ }
+
+ list_for_each_safe(qe, qen, &itnim->io_q) {
+ ioim = (struct bfa_ioim_s *) qe;
+ bfa_ioim_iocdisable(ioim);
+ }
+
+ /**
+ * For IO request in pending queue, we pretend an early timeout.
+ */
+ list_for_each_safe(qe, qen, &itnim->pending_q) {
+ ioim = (struct bfa_ioim_s *) qe;
+ bfa_ioim_tov(ioim);
+ }
+
+ list_for_each_safe(qe, qen, &itnim->io_cleanup_q) {
+ ioim = (struct bfa_ioim_s *) qe;
+ bfa_ioim_iocdisable(ioim);
+ }
+}
+
+/**
+ * IO cleanup completion
+ */
+static void
+bfa_itnim_cleanp_comp(void *itnim_cbarg)
+{
+ struct bfa_itnim_s *itnim = itnim_cbarg;
+
+ bfa_stats(itnim, cleanup_comps);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_CLEANUP);
+}
+
+/**
+ * Initiate cleanup of all IOs.
+ */
+static void
+bfa_itnim_cleanup(struct bfa_itnim_s *itnim)
+{
+ struct bfa_ioim_s *ioim;
+ struct bfa_tskim_s *tskim;
+ struct list_head *qe, *qen;
+
+ bfa_wc_init(&itnim->wc, bfa_itnim_cleanp_comp, itnim);
+
+ list_for_each_safe(qe, qen, &itnim->io_q) {
+ ioim = (struct bfa_ioim_s *) qe;
+
+ /**
+ * Move IO to a cleanup queue from active queue so that a later
+ * TM will not pickup this IO.
+ */
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe, &itnim->io_cleanup_q);
+
+ bfa_wc_up(&itnim->wc);
+ bfa_ioim_cleanup(ioim);
+ }
+
+ list_for_each_safe(qe, qen, &itnim->tsk_q) {
+ tskim = (struct bfa_tskim_s *) qe;
+ bfa_wc_up(&itnim->wc);
+ bfa_tskim_cleanup(tskim);
+ }
+
+ bfa_wc_wait(&itnim->wc);
+}
+
+static void
+__bfa_cb_itnim_online(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_itnim_s *itnim = cbarg;
+
+ if (complete)
+ bfa_cb_itnim_online(itnim->ditn);
+}
+
+static void
+__bfa_cb_itnim_offline(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_itnim_s *itnim = cbarg;
+
+ if (complete)
+ bfa_cb_itnim_offline(itnim->ditn);
+}
+
+static void
+__bfa_cb_itnim_sler(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_itnim_s *itnim = cbarg;
+
+ if (complete)
+ bfa_cb_itnim_sler(itnim->ditn);
+}
+
+/**
+ * Call to resume any I/O requests waiting for room in request queue.
+ */
+static void
+bfa_itnim_qresume(void *cbarg)
+{
+ struct bfa_itnim_s *itnim = cbarg;
+
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_QRESUME);
+}
+
+
+
+
+/**
+ * bfa_itnim_public
+ */
+
+void
+bfa_itnim_iodone(struct bfa_itnim_s *itnim)
+{
+ bfa_wc_down(&itnim->wc);
+}
+
+void
+bfa_itnim_tskdone(struct bfa_itnim_s *itnim)
+{
+ bfa_wc_down(&itnim->wc);
+}
+
+void
+bfa_itnim_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+ u32 *dm_len)
+{
+ /**
+ * ITN memory
+ */
+ *km_len += cfg->fwcfg.num_rports * sizeof(struct bfa_itnim_s);
+}
+
+void
+bfa_itnim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
+{
+ struct bfa_s *bfa = fcpim->bfa;
+ struct bfa_itnim_s *itnim;
+ int i;
+
+ INIT_LIST_HEAD(&fcpim->itnim_q);
+
+ itnim = (struct bfa_itnim_s *) bfa_meminfo_kva(minfo);
+ fcpim->itnim_arr = itnim;
+
+ for (i = 0; i < fcpim->num_itnims; i++, itnim++) {
+ bfa_os_memset(itnim, 0, sizeof(struct bfa_itnim_s));
+ itnim->bfa = bfa;
+ itnim->fcpim = fcpim;
+ itnim->reqq = BFA_REQQ_QOS_LO;
+ itnim->rport = BFA_RPORT_FROM_TAG(bfa, i);
+ itnim->iotov_active = BFA_FALSE;
+ bfa_reqq_winit(&itnim->reqq_wait, bfa_itnim_qresume, itnim);
+
+ INIT_LIST_HEAD(&itnim->io_q);
+ INIT_LIST_HEAD(&itnim->io_cleanup_q);
+ INIT_LIST_HEAD(&itnim->pending_q);
+ INIT_LIST_HEAD(&itnim->tsk_q);
+ INIT_LIST_HEAD(&itnim->delay_comp_q);
+ bfa_sm_set_state(itnim, bfa_itnim_sm_uninit);
+ }
+
+ bfa_meminfo_kva(minfo) = (u8 *) itnim;
+}
+
+void
+bfa_itnim_iocdisable(struct bfa_itnim_s *itnim)
+{
+ bfa_stats(itnim, ioc_disabled);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_HWFAIL);
+}
+
+static bfa_boolean_t
+bfa_itnim_send_fwcreate(struct bfa_itnim_s *itnim)
+{
+ struct bfi_itnim_create_req_s *m;
+
+ itnim->msg_no++;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(itnim->bfa, itnim->reqq);
+ if (!m) {
+ bfa_reqq_wait(itnim->bfa, itnim->reqq, &itnim->reqq_wait);
+ return BFA_FALSE;
+ }
+
+ bfi_h2i_set(m->mh, BFI_MC_ITNIM, BFI_ITNIM_H2I_CREATE_REQ,
+ bfa_lpuid(itnim->bfa));
+ m->fw_handle = itnim->rport->fw_handle;
+ m->class = FC_CLASS_3;
+ m->seq_rec = itnim->seq_rec;
+ m->msg_no = itnim->msg_no;
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(itnim->bfa, itnim->reqq);
+ return BFA_TRUE;
+}
+
+static bfa_boolean_t
+bfa_itnim_send_fwdelete(struct bfa_itnim_s *itnim)
+{
+ struct bfi_itnim_delete_req_s *m;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(itnim->bfa, itnim->reqq);
+ if (!m) {
+ bfa_reqq_wait(itnim->bfa, itnim->reqq, &itnim->reqq_wait);
+ return BFA_FALSE;
+ }
+
+ bfi_h2i_set(m->mh, BFI_MC_ITNIM, BFI_ITNIM_H2I_DELETE_REQ,
+ bfa_lpuid(itnim->bfa));
+ m->fw_handle = itnim->rport->fw_handle;
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(itnim->bfa, itnim->reqq);
+ return BFA_TRUE;
+}
+
+/**
+ * Cleanup all pending failed inflight requests.
+ */
+static void
+bfa_itnim_delayed_comp(struct bfa_itnim_s *itnim, bfa_boolean_t iotov)
+{
+ struct bfa_ioim_s *ioim;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &itnim->delay_comp_q) {
+ ioim = (struct bfa_ioim_s *)qe;
+ bfa_ioim_delayed_comp(ioim, iotov);
+ }
+}
+
+/**
+ * Start all pending IO requests.
+ */
+static void
+bfa_itnim_iotov_online(struct bfa_itnim_s *itnim)
+{
+ struct bfa_ioim_s *ioim;
+
+ bfa_itnim_iotov_stop(itnim);
+
+ /**
+ * Abort all inflight IO requests in the queue
+ */
+ bfa_itnim_delayed_comp(itnim, BFA_FALSE);
+
+ /**
+ * Start all pending IO requests.
+ */
+ while (!list_empty(&itnim->pending_q)) {
+ bfa_q_deq(&itnim->pending_q, &ioim);
+ list_add_tail(&ioim->qe, &itnim->io_q);
+ bfa_ioim_start(ioim);
+ }
+}
+
+/**
+ * Fail all pending IO requests
+ */
+static void
+bfa_itnim_iotov_cleanup(struct bfa_itnim_s *itnim)
+{
+ struct bfa_ioim_s *ioim;
+
+ /**
+ * Fail all inflight IO requests in the queue
+ */
+ bfa_itnim_delayed_comp(itnim, BFA_TRUE);
+
+ /**
+ * Fail any pending IO requests.
+ */
+ while (!list_empty(&itnim->pending_q)) {
+ bfa_q_deq(&itnim->pending_q, &ioim);
+ list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
+ bfa_ioim_tov(ioim);
+ }
+}
+
+/**
+ * IO TOV timer callback. Fail any pending IO requests.
+ */
+static void
+bfa_itnim_iotov(void *itnim_arg)
+{
+ struct bfa_itnim_s *itnim = itnim_arg;
+
+ itnim->iotov_active = BFA_FALSE;
+
+ bfa_cb_itnim_tov_begin(itnim->ditn);
+ bfa_itnim_iotov_cleanup(itnim);
+ bfa_cb_itnim_tov(itnim->ditn);
+}
+
+/**
+ * Start IO TOV timer for failing back pending IO requests in offline state.
+ */
+static void
+bfa_itnim_iotov_start(struct bfa_itnim_s *itnim)
+{
+ if (itnim->fcpim->path_tov > 0) {
+
+ itnim->iotov_active = BFA_TRUE;
+ bfa_assert(bfa_itnim_hold_io(itnim));
+ bfa_timer_start(itnim->bfa, &itnim->timer,
+ bfa_itnim_iotov, itnim, itnim->fcpim->path_tov);
+ }
+}
+
+/**
+ * Stop IO TOV timer.
+ */
+static void
+bfa_itnim_iotov_stop(struct bfa_itnim_s *itnim)
+{
+ if (itnim->iotov_active) {
+ itnim->iotov_active = BFA_FALSE;
+ bfa_timer_stop(&itnim->timer);
+ }
+}
+
+/**
+ * Stop IO TOV timer.
+ */
+static void
+bfa_itnim_iotov_delete(struct bfa_itnim_s *itnim)
+{
+ bfa_boolean_t pathtov_active = BFA_FALSE;
+
+ if (itnim->iotov_active)
+ pathtov_active = BFA_TRUE;
+
+ bfa_itnim_iotov_stop(itnim);
+ if (pathtov_active)
+ bfa_cb_itnim_tov_begin(itnim->ditn);
+ bfa_itnim_iotov_cleanup(itnim);
+ if (pathtov_active)
+ bfa_cb_itnim_tov(itnim->ditn);
+}
+
+
+
+/**
+ * bfa_itnim_public
+ */
+
+/**
+ * Itnim interrupt processing.
+ */
+void
+bfa_itnim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+ union bfi_itnim_i2h_msg_u msg;
+ struct bfa_itnim_s *itnim;
+
+ bfa_trc(bfa, m->mhdr.msg_id);
+
+ msg.msg = m;
+
+ switch (m->mhdr.msg_id) {
+ case BFI_ITNIM_I2H_CREATE_RSP:
+ itnim = BFA_ITNIM_FROM_TAG(fcpim,
+ msg.create_rsp->bfa_handle);
+ bfa_assert(msg.create_rsp->status == BFA_STATUS_OK);
+ bfa_stats(itnim, create_comps);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_FWRSP);
+ break;
+
+ case BFI_ITNIM_I2H_DELETE_RSP:
+ itnim = BFA_ITNIM_FROM_TAG(fcpim,
+ msg.delete_rsp->bfa_handle);
+ bfa_assert(msg.delete_rsp->status == BFA_STATUS_OK);
+ bfa_stats(itnim, delete_comps);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_FWRSP);
+ break;
+
+ case BFI_ITNIM_I2H_SLER_EVENT:
+ itnim = BFA_ITNIM_FROM_TAG(fcpim,
+ msg.sler_event->bfa_handle);
+ bfa_stats(itnim, sler_events);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_SLER);
+ break;
+
+ default:
+ bfa_trc(bfa, m->mhdr.msg_id);
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * bfa_itnim_api
+ */
+
+struct bfa_itnim_s *
+bfa_itnim_create(struct bfa_s *bfa, struct bfa_rport_s *rport, void *ditn)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+ struct bfa_itnim_s *itnim;
+
+ itnim = BFA_ITNIM_FROM_TAG(fcpim, rport->rport_tag);
+ bfa_assert(itnim->rport == rport);
+
+ itnim->ditn = ditn;
+
+ bfa_stats(itnim, creates);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_CREATE);
+
+ return (itnim);
+}
+
+void
+bfa_itnim_delete(struct bfa_itnim_s *itnim)
+{
+ bfa_stats(itnim, deletes);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_DELETE);
+}
+
+void
+bfa_itnim_online(struct bfa_itnim_s *itnim, bfa_boolean_t seq_rec)
+{
+ itnim->seq_rec = seq_rec;
+ bfa_stats(itnim, onlines);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_ONLINE);
+}
+
+void
+bfa_itnim_offline(struct bfa_itnim_s *itnim)
+{
+ bfa_stats(itnim, offlines);
+ bfa_sm_send_event(itnim, BFA_ITNIM_SM_OFFLINE);
+}
+
+/**
+ * Return true if itnim is considered offline for holding off IO request.
+ * IO is not held if itnim is being deleted.
+ */
+bfa_boolean_t
+bfa_itnim_hold_io(struct bfa_itnim_s *itnim)
+{
+ return (
+ itnim->fcpim->path_tov && itnim->iotov_active &&
+ (bfa_sm_cmp_state(itnim, bfa_itnim_sm_fwcreate) ||
+ bfa_sm_cmp_state(itnim, bfa_itnim_sm_sler) ||
+ bfa_sm_cmp_state(itnim, bfa_itnim_sm_cleanup_offline) ||
+ bfa_sm_cmp_state(itnim, bfa_itnim_sm_fwdelete) ||
+ bfa_sm_cmp_state(itnim, bfa_itnim_sm_offline) ||
+ bfa_sm_cmp_state(itnim, bfa_itnim_sm_iocdisable))
+);
+}
+
+void
+bfa_itnim_get_stats(struct bfa_itnim_s *itnim,
+ struct bfa_itnim_hal_stats_s *stats)
+{
+ *stats = itnim->stats;
+}
+
+void
+bfa_itnim_clear_stats(struct bfa_itnim_s *itnim)
+{
+ bfa_os_memset(&itnim->stats, 0, sizeof(itnim->stats));
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_log.c BFA log library
+ */
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_log.h>
+
+/*
+ * global log info structure
+ */
+struct bfa_log_info_s {
+ u32 start_idx; /* start index for a module */
+ u32 total_count; /* total count for a module */
+ enum bfa_log_severity level; /* global log level */
+ bfa_log_cb_t cbfn; /* callback function */
+};
+
+static struct bfa_log_info_s bfa_log_info[BFA_LOG_MODULE_ID_MAX + 1];
+static u32 bfa_log_msg_total_count;
+static int bfa_log_initialized;
+
+static char *bfa_log_severity[] =
+ { "[none]", "[critical]", "[error]", "[warn]", "[info]", "" };
+
+/**
+ * BFA log library initialization
+ *
+ * The log library initialization includes the following,
+ * - set log instance name and callback function
+ * - read the message array generated from xml files
+ * - calculate start index for each module
+ * - calculate message count for each module
+ * - perform error checking
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] instance_name - instance name
+ * @param[in] cbfn - callback function
+ *
+ * It return 0 on success, or -1 on failure
+ */
+int
+bfa_log_init(struct bfa_log_mod_s *log_mod, char *instance_name,
+ bfa_log_cb_t cbfn)
+{
+ struct bfa_log_msgdef_s *msg;
+ u32 pre_mod_id = 0;
+ u32 cur_mod_id = 0;
+ u32 i, pre_idx, idx, msg_id;
+
+ /*
+ * set instance name
+ */
+ if (log_mod) {
+ strncpy(log_mod->instance_info, instance_name,
+ sizeof(log_mod->instance_info));
+ log_mod->cbfn = cbfn;
+ for (i = 0; i <= BFA_LOG_MODULE_ID_MAX; i++)
+ log_mod->log_level[i] = BFA_LOG_WARNING;
+ }
+
+ if (bfa_log_initialized)
+ return 0;
+
+ for (i = 0; i <= BFA_LOG_MODULE_ID_MAX; i++) {
+ bfa_log_info[i].start_idx = 0;
+ bfa_log_info[i].total_count = 0;
+ bfa_log_info[i].level = BFA_LOG_WARNING;
+ bfa_log_info[i].cbfn = cbfn;
+ }
+
+ pre_idx = 0;
+ idx = 0;
+ msg = bfa_log_msg_array;
+ msg_id = BFA_LOG_GET_MSG_ID(msg);
+ pre_mod_id = BFA_LOG_GET_MOD_ID(msg_id);
+ while (msg_id != 0) {
+ cur_mod_id = BFA_LOG_GET_MOD_ID(msg_id);
+
+ if (cur_mod_id > BFA_LOG_MODULE_ID_MAX) {
+ cbfn(log_mod, msg_id,
+ "%s%s log: module id %u out of range\n",
+ BFA_LOG_CAT_NAME,
+ bfa_log_severity[BFA_LOG_ERROR],
+ cur_mod_id);
+ return -1;
+ }
+
+ if (pre_mod_id > BFA_LOG_MODULE_ID_MAX) {
+ cbfn(log_mod, msg_id,
+ "%s%s log: module id %u out of range\n",
+ BFA_LOG_CAT_NAME,
+ bfa_log_severity[BFA_LOG_ERROR],
+ pre_mod_id);
+ return -1;
+ }
+
+ if (cur_mod_id != pre_mod_id) {
+ bfa_log_info[pre_mod_id].start_idx = pre_idx;
+ bfa_log_info[pre_mod_id].total_count = idx - pre_idx;
+ pre_mod_id = cur_mod_id;
+ pre_idx = idx;
+ }
+
+ idx++;
+ msg++;
+ msg_id = BFA_LOG_GET_MSG_ID(msg);
+ }
+
+ bfa_log_info[cur_mod_id].start_idx = pre_idx;
+ bfa_log_info[cur_mod_id].total_count = idx - pre_idx;
+ bfa_log_msg_total_count = idx;
+
+ cbfn(log_mod, msg_id, "%s%s log: init OK, msg total count %u\n",
+ BFA_LOG_CAT_NAME,
+ bfa_log_severity[BFA_LOG_INFO], bfa_log_msg_total_count);
+
+ bfa_log_initialized = 1;
+
+ return 0;
+}
+
+/**
+ * BFA log set log level for a module
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] mod_id - module id
+ * @param[in] log_level - log severity level
+ *
+ * It return BFA_STATUS_OK on success, or > 0 on failure
+ */
+bfa_status_t
+bfa_log_set_level(struct bfa_log_mod_s *log_mod, int mod_id,
+ enum bfa_log_severity log_level)
+{
+ if (mod_id <= BFA_LOG_UNUSED_ID || mod_id > BFA_LOG_MODULE_ID_MAX)
+ return BFA_STATUS_EINVAL;
+
+ if (log_level <= BFA_LOG_INVALID || log_level > BFA_LOG_LEVEL_MAX)
+ return BFA_STATUS_EINVAL;
+
+ if (log_mod)
+ log_mod->log_level[mod_id] = log_level;
+ else
+ bfa_log_info[mod_id].level = log_level;
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * BFA log set log level for all modules
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] log_level - log severity level
+ *
+ * It return BFA_STATUS_OK on success, or > 0 on failure
+ */
+bfa_status_t
+bfa_log_set_level_all(struct bfa_log_mod_s *log_mod,
+ enum bfa_log_severity log_level)
+{
+ int mod_id = BFA_LOG_UNUSED_ID + 1;
+
+ if (log_level <= BFA_LOG_INVALID || log_level > BFA_LOG_LEVEL_MAX)
+ return BFA_STATUS_EINVAL;
+
+ if (log_mod) {
+ for (; mod_id <= BFA_LOG_MODULE_ID_MAX; mod_id++)
+ log_mod->log_level[mod_id] = log_level;
+ } else {
+ for (; mod_id <= BFA_LOG_MODULE_ID_MAX; mod_id++)
+ bfa_log_info[mod_id].level = log_level;
+ }
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * BFA log set log level for all aen sub-modules
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] log_level - log severity level
+ *
+ * It return BFA_STATUS_OK on success, or > 0 on failure
+ */
+bfa_status_t
+bfa_log_set_level_aen(struct bfa_log_mod_s *log_mod,
+ enum bfa_log_severity log_level)
+{
+ int mod_id = BFA_LOG_AEN_MIN + 1;
+
+ if (log_mod) {
+ for (; mod_id <= BFA_LOG_AEN_MAX; mod_id++)
+ log_mod->log_level[mod_id] = log_level;
+ } else {
+ for (; mod_id <= BFA_LOG_AEN_MAX; mod_id++)
+ bfa_log_info[mod_id].level = log_level;
+ }
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * BFA log get log level for a module
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] mod_id - module id
+ *
+ * It returns log level or -1 on error
+ */
+enum bfa_log_severity
+bfa_log_get_level(struct bfa_log_mod_s *log_mod, int mod_id)
+{
+ if (mod_id <= BFA_LOG_UNUSED_ID || mod_id > BFA_LOG_MODULE_ID_MAX)
+ return BFA_LOG_INVALID;
+
+ if (log_mod)
+ return (log_mod->log_level[mod_id]);
+ else
+ return (bfa_log_info[mod_id].level);
+}
+
+enum bfa_log_severity
+bfa_log_get_msg_level(struct bfa_log_mod_s *log_mod, u32 msg_id)
+{
+ struct bfa_log_msgdef_s *msg;
+ u32 mod = BFA_LOG_GET_MOD_ID(msg_id);
+ u32 idx = BFA_LOG_GET_MSG_IDX(msg_id) - 1;
+
+ if (!bfa_log_initialized)
+ return BFA_LOG_INVALID;
+
+ if (mod > BFA_LOG_MODULE_ID_MAX)
+ return BFA_LOG_INVALID;
+
+ if (idx >= bfa_log_info[mod].total_count) {
+ bfa_log_info[mod].cbfn(log_mod, msg_id,
+ "%s%s log: inconsistent idx %u vs. total count %u\n",
+ BFA_LOG_CAT_NAME, bfa_log_severity[BFA_LOG_ERROR], idx,
+ bfa_log_info[mod].total_count);
+ return BFA_LOG_INVALID;
+ }
+
+ msg = bfa_log_msg_array + bfa_log_info[mod].start_idx + idx;
+ if (msg_id != BFA_LOG_GET_MSG_ID(msg)) {
+ bfa_log_info[mod].cbfn(log_mod, msg_id,
+ "%s%s log: inconsistent msg id %u array msg id %u\n",
+ BFA_LOG_CAT_NAME, bfa_log_severity[BFA_LOG_ERROR],
+ msg_id, BFA_LOG_GET_MSG_ID(msg));
+ return BFA_LOG_INVALID;
+ }
+
+ return BFA_LOG_GET_SEVERITY(msg);
+}
+
+/**
+ * BFA log message handling
+ *
+ * BFA log message handling finds the message based on message id and prints
+ * out the message based on its format and arguments. It also does prefix
+ * the severity etc.
+ *
+ * @param[in] log_mod - log module info
+ * @param[in] msg_id - message id
+ * @param[in] ... - message arguments
+ *
+ * It return 0 on success, or -1 on errors
+ */
+int
+bfa_log(struct bfa_log_mod_s *log_mod, u32 msg_id, ...)
+{
+ va_list ap;
+ char buf[256];
+ struct bfa_log_msgdef_s *msg;
+ int log_level;
+ u32 mod = BFA_LOG_GET_MOD_ID(msg_id);
+ u32 idx = BFA_LOG_GET_MSG_IDX(msg_id) - 1;
+
+ if (!bfa_log_initialized)
+ return -1;
+
+ if (mod > BFA_LOG_MODULE_ID_MAX)
+ return -1;
+
+ if (idx >= bfa_log_info[mod].total_count) {
+ bfa_log_info[mod].
+ cbfn
+ (log_mod, msg_id,
+ "%s%s log: inconsistent idx %u vs. total count %u\n",
+ BFA_LOG_CAT_NAME, bfa_log_severity[BFA_LOG_ERROR], idx,
+ bfa_log_info[mod].total_count);
+ return -1;
+ }
+
+ msg = bfa_log_msg_array + bfa_log_info[mod].start_idx + idx;
+ if (msg_id != BFA_LOG_GET_MSG_ID(msg)) {
+ bfa_log_info[mod].
+ cbfn
+ (log_mod, msg_id,
+ "%s%s log: inconsistent msg id %u array msg id %u\n",
+ BFA_LOG_CAT_NAME, bfa_log_severity[BFA_LOG_ERROR],
+ msg_id, BFA_LOG_GET_MSG_ID(msg));
+ return -1;
+ }
+
+ log_level = log_mod ? log_mod->log_level[mod] : bfa_log_info[mod].level;
+ if ((BFA_LOG_GET_SEVERITY(msg) > log_level) &&
+ (msg->attributes != BFA_LOG_ATTR_NONE))
+ return 0;
+
+ va_start(ap, msg_id);
+ bfa_os_vsprintf(buf, BFA_LOG_GET_MSG_FMT_STRING(msg), ap);
+ va_end(ap);
+
+ if (log_mod)
+ log_mod->cbfn(log_mod, msg_id, "%s[%s]%s%s %s: %s\n",
+ BFA_LOG_CAT_NAME, log_mod->instance_info,
+ bfa_log_severity[BFA_LOG_GET_SEVERITY(msg)],
+ (msg->attributes & BFA_LOG_ATTR_AUDIT)
+ ? " (audit) " : "", msg->msg_value, buf);
+ else
+ bfa_log_info[mod].cbfn(log_mod, msg_id, "%s%s%s %s: %s\n",
+ BFA_LOG_CAT_NAME,
+ bfa_log_severity[BFA_LOG_GET_SEVERITY(msg)],
+ (msg->attributes & BFA_LOG_ATTR_AUDIT) ?
+ " (audit) " : "", msg->msg_value, buf);
+
+ return 0;
+}
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <cs/bfa_log.h>
+#include <aen/bfa_aen_adapter.h>
+#include <aen/bfa_aen_audit.h>
+#include <aen/bfa_aen_ethport.h>
+#include <aen/bfa_aen_ioc.h>
+#include <aen/bfa_aen_itnim.h>
+#include <aen/bfa_aen_lport.h>
+#include <aen/bfa_aen_port.h>
+#include <aen/bfa_aen_rport.h>
+#include <log/bfa_log_fcs.h>
+#include <log/bfa_log_hal.h>
+#include <log/bfa_log_linux.h>
+#include <log/bfa_log_wdrv.h>
+
+struct bfa_log_msgdef_s bfa_log_msg_array[] = {
+
+
+/* messages define for BFA_AEN_CAT_ADAPTER Module */
+{BFA_AEN_ADAPTER_ADD, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ADAPTER_ADD",
+ "New adapter found: SN = %s, base port WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_ADAPTER_REMOVE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_ADAPTER_REMOVE",
+ "Adapter removed: SN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_AUDIT Module */
+{BFA_AEN_AUDIT_AUTH_ENABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_AUDIT_AUTH_ENABLE",
+ "Authentication enabled for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_AUDIT_AUTH_DISABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_AUDIT_AUTH_DISABLE",
+ "Authentication disabled for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_ETHPORT Module */
+{BFA_AEN_ETHPORT_LINKUP, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ETHPORT_LINKUP",
+ "Base port ethernet linkup: mac = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_ETHPORT_LINKDOWN, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ETHPORT_LINKDOWN",
+ "Base port ethernet linkdown: mac = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_ETHPORT_ENABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ETHPORT_ENABLE",
+ "Base port ethernet interface enabled: mac = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_ETHPORT_DISABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ETHPORT_DISABLE",
+ "Base port ethernet interface disabled: mac = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_IOC Module */
+{BFA_AEN_IOC_HBGOOD, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_IOC_HBGOOD",
+ "Heart Beat of IOC %d is good.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_IOC_HBFAIL, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_CRITICAL,
+ "BFA_AEN_IOC_HBFAIL",
+ "Heart Beat of IOC %d has failed.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_IOC_ENABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_IOC_ENABLE",
+ "IOC %d is enabled.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_IOC_DISABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_IOC_DISABLE",
+ "IOC %d is disabled.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_IOC_FWMISMATCH, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_CRITICAL, "BFA_AEN_IOC_FWMISMATCH",
+ "Running firmware version is incompatible with the driver version.",
+ (0), 0},
+
+
+
+
+/* messages define for BFA_AEN_CAT_ITNIM Module */
+{BFA_AEN_ITNIM_ONLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ITNIM_ONLINE",
+ "Target (WWN = %s) is online for initiator (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_ITNIM_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_ITNIM_OFFLINE",
+ "Target (WWN = %s) offlined by initiator (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_ITNIM_DISCONNECT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_ERROR, "BFA_AEN_ITNIM_DISCONNECT",
+ "Target (WWN = %s) connectivity lost for initiator (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+
+
+
+/* messages define for BFA_AEN_CAT_LPORT Module */
+{BFA_AEN_LPORT_NEW, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_NEW",
+ "New logical port created: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_DELETE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_DELETE",
+ "Logical port deleted: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_ONLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_ONLINE",
+ "Logical port online: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_OFFLINE",
+ "Logical port taken offline: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_DISCONNECT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_ERROR, "BFA_AEN_LPORT_DISCONNECT",
+ "Logical port lost fabric connectivity: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_NEW_PROP, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_LPORT_NEW_PROP",
+ "New virtual port created using proprietary interface: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_DELETE_PROP, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_LPORT_DELETE_PROP",
+ "Virtual port deleted using proprietary interface: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_NEW_STANDARD, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_LPORT_NEW_STANDARD",
+ "New virtual port created using standard interface: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_DELETE_STANDARD, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "BFA_AEN_LPORT_DELETE_STANDARD",
+ "Virtual port deleted using standard interface: WWN = %s, Role = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_LPORT_NPIV_DUP_WWN, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_LPORT_NPIV_DUP_WWN",
+ "Virtual port login failed. Duplicate WWN = %s reported by fabric.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_LPORT_NPIV_FABRIC_MAX, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_LPORT_NPIV_FABRIC_MAX",
+ "Virtual port (WWN = %s) login failed. Max NPIV ports already exist in"
+ " fabric/fport.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_LPORT_NPIV_UNKNOWN, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_LPORT_NPIV_UNKNOWN",
+ "Virtual port (WWN = %s) login failed.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_PORT Module */
+{BFA_AEN_PORT_ONLINE, BFA_LOG_ATTR_NONE, BFA_LOG_INFO, "BFA_AEN_PORT_ONLINE",
+ "Base port online: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_WARNING,
+ "BFA_AEN_PORT_OFFLINE",
+ "Base port offline: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_RLIR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_RLIR",
+ "RLIR event not supported.",
+ (0), 0},
+
+{BFA_AEN_PORT_SFP_INSERT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_SFP_INSERT",
+ "New SFP found: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_SFP_REMOVE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_PORT_SFP_REMOVE",
+ "SFP removed: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_SFP_POM, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_WARNING,
+ "BFA_AEN_PORT_SFP_POM",
+ "SFP POM level to %s: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_PORT_ENABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_ENABLE",
+ "Base port enabled: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_DISABLE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_DISABLE",
+ "Base port disabled: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_AUTH_ON, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_PORT_AUTH_ON",
+ "Authentication successful for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_AUTH_OFF, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_ERROR,
+ "BFA_AEN_PORT_AUTH_OFF",
+ "Authentication unsuccessful for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_DISCONNECT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_ERROR,
+ "BFA_AEN_PORT_DISCONNECT",
+ "Base port (WWN = %s) lost fabric connectivity.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_QOS_NEG, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_WARNING,
+ "BFA_AEN_PORT_QOS_NEG",
+ "QOS negotiation failed for base port: WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_FABRIC_NAME_CHANGE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_PORT_FABRIC_NAME_CHANGE",
+ "Base port WWN = %s, Fabric WWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_PORT_SFP_ACCESS_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_PORT_SFP_ACCESS_ERROR",
+ "SFP access error: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_AEN_PORT_SFP_UNSUPPORT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_WARNING, "BFA_AEN_PORT_SFP_UNSUPPORT",
+ "Unsupported SFP found: WWN/MAC = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+
+
+
+/* messages define for BFA_AEN_CAT_RPORT Module */
+{BFA_AEN_RPORT_ONLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_RPORT_ONLINE",
+ "Remote port (WWN = %s) online for logical port (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_RPORT_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_RPORT_OFFLINE",
+ "Remote port (WWN = %s) offlined by logical port (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_RPORT_DISCONNECT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_ERROR, "BFA_AEN_RPORT_DISCONNECT",
+ "Remote port (WWN = %s) connectivity lost for logical port (WWN = %s).",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) | 0), 2},
+
+{BFA_AEN_RPORT_QOS_PRIO, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_RPORT_QOS_PRIO",
+ "QOS priority changed to %s: RPWWN = %s and LPWWN = %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) |
+ (BFA_LOG_S << BFA_LOG_ARG2) | 0), 3},
+
+{BFA_AEN_RPORT_QOS_FLOWID, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "BFA_AEN_RPORT_QOS_FLOWID",
+ "QOS flow ID changed to %d: RPWWN = %s and LPWWN = %s.",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) |
+ (BFA_LOG_S << BFA_LOG_ARG2) | 0), 3},
+
+
+
+
+/* messages define for FCS Module */
+{BFA_LOG_FCS_FABRIC_NOSWITCH, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "FCS_FABRIC_NOSWITCH",
+ "No switched fabric presence is detected.",
+ (0), 0},
+
+{BFA_LOG_FCS_FABRIC_ISOLATED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "FCS_FABRIC_ISOLATED",
+ "Port is isolated due to VF_ID mismatch. PWWN: %s, Port VF_ID: %04x and"
+ " switch port VF_ID: %04x.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_X << BFA_LOG_ARG1) |
+ (BFA_LOG_X << BFA_LOG_ARG2) | 0), 3},
+
+
+
+
+/* messages define for HAL Module */
+{BFA_LOG_HAL_ASSERT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_ERROR,
+ "HAL_ASSERT",
+ "Assertion failure: %s:%d: %s",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+ (BFA_LOG_S << BFA_LOG_ARG2) | 0), 3},
+
+{BFA_LOG_HAL_HEARTBEAT_FAILURE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_CRITICAL, "HAL_HEARTBEAT_FAILURE",
+ "Firmware heartbeat failure at %d",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_HAL_FCPIM_PARM_INVALID, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "HAL_FCPIM_PARM_INVALID",
+ "Driver configuration %s value %d is invalid. Value should be within"
+ " %d and %d.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+ (BFA_LOG_D << BFA_LOG_ARG2) | (BFA_LOG_D << BFA_LOG_ARG3) | 0), 4},
+
+{BFA_LOG_HAL_SM_ASSERT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_ERROR,
+ "HAL_SM_ASSERT",
+ "SM Assertion failure: %s:%d: event = %d",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+ (BFA_LOG_D << BFA_LOG_ARG2) | 0), 3},
+
+
+
+
+/* messages define for LINUX Module */
+{BFA_LOG_LINUX_DEVICE_CLAIMED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_DEVICE_CLAIMED",
+ "bfa device at %s claimed.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_HASH_INIT_FAILED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_HASH_INIT_FAILED",
+ "Hash table initialization failure for the port %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_SYSFS_FAILED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_SYSFS_FAILED",
+ "sysfs file creation failure for the port %s.",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_MEM_ALLOC_FAILED, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_MEM_ALLOC_FAILED",
+ "Memory allocation failed: %s. ",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_DRIVER_REGISTRATION_FAILED,
+ BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "LINUX_DRIVER_REGISTRATION_FAILED",
+ "%s. ",
+ ((BFA_LOG_S << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_ITNIM_FREE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "LINUX_ITNIM_FREE",
+ "scsi%d: FCID: %s WWPN: %s",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_S << BFA_LOG_ARG1) |
+ (BFA_LOG_S << BFA_LOG_ARG2) | 0), 3},
+
+{BFA_LOG_LINUX_ITNIM_ONLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_ITNIM_ONLINE",
+ "Target: %d:0:%d FCID: %s WWPN: %s",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+ (BFA_LOG_S << BFA_LOG_ARG2) | (BFA_LOG_S << BFA_LOG_ARG3) | 0), 4},
+
+{BFA_LOG_LINUX_ITNIM_OFFLINE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_ITNIM_OFFLINE",
+ "Target: %d:0:%d FCID: %s WWPN: %s",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_D << BFA_LOG_ARG1) |
+ (BFA_LOG_S << BFA_LOG_ARG2) | (BFA_LOG_S << BFA_LOG_ARG3) | 0), 4},
+
+{BFA_LOG_LINUX_SCSI_HOST_FREE, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_SCSI_HOST_FREE",
+ "Free scsi%d",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | 0), 1},
+
+{BFA_LOG_LINUX_SCSI_ABORT, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG, BFA_LOG_INFO,
+ "LINUX_SCSI_ABORT",
+ "scsi%d: abort cmnd %p, iotag %x",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_P << BFA_LOG_ARG1) |
+ (BFA_LOG_X << BFA_LOG_ARG2) | 0), 3},
+
+{BFA_LOG_LINUX_SCSI_ABORT_COMP, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "LINUX_SCSI_ABORT_COMP",
+ "scsi%d: complete abort 0x%p, iotag 0x%x",
+ ((BFA_LOG_D << BFA_LOG_ARG0) | (BFA_LOG_P << BFA_LOG_ARG1) |
+ (BFA_LOG_X << BFA_LOG_ARG2) | 0), 3},
+
+
+
+
+/* messages define for WDRV Module */
+{BFA_LOG_WDRV_IOC_INIT_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_IOC_INIT_ERROR",
+ "IOC initialization has failed.",
+ (0), 0},
+
+{BFA_LOG_WDRV_IOC_INTERNAL_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_IOC_INTERNAL_ERROR",
+ "IOC internal error. ",
+ (0), 0},
+
+{BFA_LOG_WDRV_IOC_START_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_IOC_START_ERROR",
+ "IOC could not be started. ",
+ (0), 0},
+
+{BFA_LOG_WDRV_IOC_STOP_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_IOC_STOP_ERROR",
+ "IOC could not be stopped. ",
+ (0), 0},
+
+{BFA_LOG_WDRV_INSUFFICIENT_RESOURCES, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_INSUFFICIENT_RESOURCES",
+ "Insufficient memory. ",
+ (0), 0},
+
+{BFA_LOG_WDRV_BASE_ADDRESS_MAP_ERROR, BFA_LOG_ATTR_NONE | BFA_LOG_ATTR_LOG,
+ BFA_LOG_INFO, "WDRV_BASE_ADDRESS_MAP_ERROR",
+ "Unable to map the IOC onto the system address space. ",
+ (0), 0},
+
+
+{0, 0, 0, "", "", 0, 0},
+};
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfi/bfi_lps.h>
+#include <cs/bfa_debug.h>
+
+BFA_TRC_FILE(HAL, LPS);
+BFA_MODULE(lps);
+
+#define BFA_LPS_MIN_LPORTS (1)
+#define BFA_LPS_MAX_LPORTS (256)
+
+/**
+ * forward declarations
+ */
+static void bfa_lps_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len,
+ u32 *dm_len);
+static void bfa_lps_attach(struct bfa_s *bfa, void *bfad,
+ struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo,
+ struct bfa_pcidev_s *pcidev);
+static void bfa_lps_initdone(struct bfa_s *bfa);
+static void bfa_lps_detach(struct bfa_s *bfa);
+static void bfa_lps_start(struct bfa_s *bfa);
+static void bfa_lps_stop(struct bfa_s *bfa);
+static void bfa_lps_iocdisable(struct bfa_s *bfa);
+static void bfa_lps_login_rsp(struct bfa_s *bfa,
+ struct bfi_lps_login_rsp_s *rsp);
+static void bfa_lps_logout_rsp(struct bfa_s *bfa,
+ struct bfi_lps_logout_rsp_s *rsp);
+static void bfa_lps_reqq_resume(void *lps_arg);
+static void bfa_lps_free(struct bfa_lps_s *lps);
+static void bfa_lps_send_login(struct bfa_lps_s *lps);
+static void bfa_lps_send_logout(struct bfa_lps_s *lps);
+static void bfa_lps_login_comp(struct bfa_lps_s *lps);
+static void bfa_lps_logout_comp(struct bfa_lps_s *lps);
+
+
+/**
+ * lps_pvt BFA LPS private functions
+ */
+
+enum bfa_lps_event {
+ BFA_LPS_SM_LOGIN = 1, /* login request from user */
+ BFA_LPS_SM_LOGOUT = 2, /* logout request from user */
+ BFA_LPS_SM_FWRSP = 3, /* f/w response to login/logout */
+ BFA_LPS_SM_RESUME = 4, /* space present in reqq queue */
+ BFA_LPS_SM_DELETE = 5, /* lps delete from user */
+ BFA_LPS_SM_OFFLINE = 6, /* Link is offline */
+};
+
+static void bfa_lps_sm_init(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_loginwait(struct bfa_lps_s *lps,
+ enum bfa_lps_event event);
+static void bfa_lps_sm_online(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_logout(struct bfa_lps_s *lps, enum bfa_lps_event event);
+static void bfa_lps_sm_logowait(struct bfa_lps_s *lps,
+ enum bfa_lps_event event);
+
+/**
+ * Init state -- no login
+ */
+static void
+bfa_lps_sm_init(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+ bfa_trc(lps->bfa, lps->lp_tag);
+ bfa_trc(lps->bfa, event);
+
+ switch (event) {
+ case BFA_LPS_SM_LOGIN:
+ if (bfa_reqq_full(lps->bfa, lps->reqq)) {
+ bfa_sm_set_state(lps, bfa_lps_sm_loginwait);
+ bfa_reqq_wait(lps->bfa, lps->reqq, &lps->wqe);
+ } else {
+ bfa_sm_set_state(lps, bfa_lps_sm_login);
+ bfa_lps_send_login(lps);
+ }
+ break;
+
+ case BFA_LPS_SM_LOGOUT:
+ bfa_lps_logout_comp(lps);
+ break;
+
+ case BFA_LPS_SM_DELETE:
+ bfa_lps_free(lps);
+ break;
+
+ case BFA_LPS_SM_OFFLINE:
+ break;
+
+ case BFA_LPS_SM_FWRSP:
+ /* Could happen when fabric detects loopback and discards
+ * the lps request. Fw will eventually sent out the timeout
+ * Just ignore
+ */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * login is in progress -- awaiting response from firmware
+ */
+static void
+bfa_lps_sm_login(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+ bfa_trc(lps->bfa, lps->lp_tag);
+ bfa_trc(lps->bfa, event);
+
+ switch (event) {
+ case BFA_LPS_SM_FWRSP:
+ if (lps->status == BFA_STATUS_OK)
+ bfa_sm_set_state(lps, bfa_lps_sm_online);
+ else
+ bfa_sm_set_state(lps, bfa_lps_sm_init);
+ bfa_lps_login_comp(lps);
+ break;
+
+ case BFA_LPS_SM_OFFLINE:
+ bfa_sm_set_state(lps, bfa_lps_sm_init);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * login pending - awaiting space in request queue
+ */
+static void
+bfa_lps_sm_loginwait(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+ bfa_trc(lps->bfa, lps->lp_tag);
+ bfa_trc(lps->bfa, event);
+
+ switch (event) {
+ case BFA_LPS_SM_RESUME:
+ bfa_sm_set_state(lps, bfa_lps_sm_login);
+ break;
+
+ case BFA_LPS_SM_OFFLINE:
+ bfa_sm_set_state(lps, bfa_lps_sm_init);
+ bfa_reqq_wcancel(&lps->wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * login complete
+ */
+static void
+bfa_lps_sm_online(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+ bfa_trc(lps->bfa, lps->lp_tag);
+ bfa_trc(lps->bfa, event);
+
+ switch (event) {
+ case BFA_LPS_SM_LOGOUT:
+ if (bfa_reqq_full(lps->bfa, lps->reqq)) {
+ bfa_sm_set_state(lps, bfa_lps_sm_logowait);
+ bfa_reqq_wait(lps->bfa, lps->reqq, &lps->wqe);
+ } else {
+ bfa_sm_set_state(lps, bfa_lps_sm_logout);
+ bfa_lps_send_logout(lps);
+ }
+ break;
+
+ case BFA_LPS_SM_OFFLINE:
+ case BFA_LPS_SM_DELETE:
+ bfa_sm_set_state(lps, bfa_lps_sm_init);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * logout in progress - awaiting firmware response
+ */
+static void
+bfa_lps_sm_logout(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+ bfa_trc(lps->bfa, lps->lp_tag);
+ bfa_trc(lps->bfa, event);
+
+ switch (event) {
+ case BFA_LPS_SM_FWRSP:
+ bfa_sm_set_state(lps, bfa_lps_sm_init);
+ bfa_lps_logout_comp(lps);
+ break;
+
+ case BFA_LPS_SM_OFFLINE:
+ bfa_sm_set_state(lps, bfa_lps_sm_init);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * logout pending -- awaiting space in request queue
+ */
+static void
+bfa_lps_sm_logowait(struct bfa_lps_s *lps, enum bfa_lps_event event)
+{
+ bfa_trc(lps->bfa, lps->lp_tag);
+ bfa_trc(lps->bfa, event);
+
+ switch (event) {
+ case BFA_LPS_SM_RESUME:
+ bfa_sm_set_state(lps, bfa_lps_sm_logout);
+ bfa_lps_send_logout(lps);
+ break;
+
+ case BFA_LPS_SM_OFFLINE:
+ bfa_sm_set_state(lps, bfa_lps_sm_init);
+ bfa_reqq_wcancel(&lps->wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * lps_pvt BFA LPS private functions
+ */
+
+/**
+ * return memory requirement
+ */
+static void
+bfa_lps_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len, u32 *dm_len)
+{
+ if (cfg->drvcfg.min_cfg)
+ *ndm_len += sizeof(struct bfa_lps_s) * BFA_LPS_MIN_LPORTS;
+ else
+ *ndm_len += sizeof(struct bfa_lps_s) * BFA_LPS_MAX_LPORTS;
+}
+
+/**
+ * bfa module attach at initialization time
+ */
+static void
+bfa_lps_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+ struct bfa_lps_mod_s *mod = BFA_LPS_MOD(bfa);
+ struct bfa_lps_s *lps;
+ int i;
+
+ bfa_os_memset(mod, 0, sizeof(struct bfa_lps_mod_s));
+ mod->num_lps = BFA_LPS_MAX_LPORTS;
+ if (cfg->drvcfg.min_cfg)
+ mod->num_lps = BFA_LPS_MIN_LPORTS;
+ else
+ mod->num_lps = BFA_LPS_MAX_LPORTS;
+ mod->lps_arr = lps = (struct bfa_lps_s *) bfa_meminfo_kva(meminfo);
+
+ bfa_meminfo_kva(meminfo) += mod->num_lps * sizeof(struct bfa_lps_s);
+
+ INIT_LIST_HEAD(&mod->lps_free_q);
+ INIT_LIST_HEAD(&mod->lps_active_q);
+
+ for (i = 0; i < mod->num_lps; i++, lps++) {
+ lps->bfa = bfa;
+ lps->lp_tag = (u8) i;
+ lps->reqq = BFA_REQQ_LPS;
+ bfa_reqq_winit(&lps->wqe, bfa_lps_reqq_resume, lps);
+ list_add_tail(&lps->qe, &mod->lps_free_q);
+ }
+}
+
+static void
+bfa_lps_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_lps_detach(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_lps_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_lps_stop(struct bfa_s *bfa)
+{
+}
+
+/**
+ * IOC in disabled state -- consider all lps offline
+ */
+static void
+bfa_lps_iocdisable(struct bfa_s *bfa)
+{
+ struct bfa_lps_mod_s *mod = BFA_LPS_MOD(bfa);
+ struct bfa_lps_s *lps;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &mod->lps_active_q) {
+ lps = (struct bfa_lps_s *) qe;
+ bfa_sm_send_event(lps, BFA_LPS_SM_OFFLINE);
+ }
+}
+
+/**
+ * Firmware login response
+ */
+static void
+bfa_lps_login_rsp(struct bfa_s *bfa, struct bfi_lps_login_rsp_s *rsp)
+{
+ struct bfa_lps_mod_s *mod = BFA_LPS_MOD(bfa);
+ struct bfa_lps_s *lps;
+
+ bfa_assert(rsp->lp_tag < mod->num_lps);
+ lps = BFA_LPS_FROM_TAG(mod, rsp->lp_tag);
+
+ lps->status = rsp->status;
+ switch (rsp->status) {
+ case BFA_STATUS_OK:
+ lps->fport = rsp->f_port;
+ lps->npiv_en = rsp->npiv_en;
+ lps->lp_pid = rsp->lp_pid;
+ lps->pr_bbcred = bfa_os_ntohs(rsp->bb_credit);
+ lps->pr_pwwn = rsp->port_name;
+ lps->pr_nwwn = rsp->node_name;
+ lps->auth_req = rsp->auth_req;
+ lps->lp_mac = rsp->lp_mac;
+ lps->brcd_switch = rsp->brcd_switch;
+ lps->fcf_mac = rsp->fcf_mac;
+
+ break;
+
+ case BFA_STATUS_FABRIC_RJT:
+ lps->lsrjt_rsn = rsp->lsrjt_rsn;
+ lps->lsrjt_expl = rsp->lsrjt_expl;
+
+ break;
+
+ case BFA_STATUS_EPROTOCOL:
+ lps->ext_status = rsp->ext_status;
+
+ break;
+
+ default:
+ /* Nothing to do with other status */
+ break;
+ }
+
+ bfa_sm_send_event(lps, BFA_LPS_SM_FWRSP);
+}
+
+/**
+ * Firmware logout response
+ */
+static void
+bfa_lps_logout_rsp(struct bfa_s *bfa, struct bfi_lps_logout_rsp_s *rsp)
+{
+ struct bfa_lps_mod_s *mod = BFA_LPS_MOD(bfa);
+ struct bfa_lps_s *lps;
+
+ bfa_assert(rsp->lp_tag < mod->num_lps);
+ lps = BFA_LPS_FROM_TAG(mod, rsp->lp_tag);
+
+ bfa_sm_send_event(lps, BFA_LPS_SM_FWRSP);
+}
+
+/**
+ * Space is available in request queue, resume queueing request to firmware.
+ */
+static void
+bfa_lps_reqq_resume(void *lps_arg)
+{
+ struct bfa_lps_s *lps = lps_arg;
+
+ bfa_sm_send_event(lps, BFA_LPS_SM_RESUME);
+}
+
+/**
+ * lps is freed -- triggered by vport delete
+ */
+static void
+bfa_lps_free(struct bfa_lps_s *lps)
+{
+ struct bfa_lps_mod_s *mod = BFA_LPS_MOD(lps->bfa);
+
+ list_del(&lps->qe);
+ list_add_tail(&lps->qe, &mod->lps_free_q);
+}
+
+/**
+ * send login request to firmware
+ */
+static void
+bfa_lps_send_login(struct bfa_lps_s *lps)
+{
+ struct bfi_lps_login_req_s *m;
+
+ m = bfa_reqq_next(lps->bfa, lps->reqq);
+ bfa_assert(m);
+
+ bfi_h2i_set(m->mh, BFI_MC_LPS, BFI_LPS_H2I_LOGIN_REQ,
+ bfa_lpuid(lps->bfa));
+
+ m->lp_tag = lps->lp_tag;
+ m->alpa = lps->alpa;
+ m->pdu_size = bfa_os_htons(lps->pdusz);
+ m->pwwn = lps->pwwn;
+ m->nwwn = lps->nwwn;
+ m->fdisc = lps->fdisc;
+ m->auth_en = lps->auth_en;
+
+ bfa_reqq_produce(lps->bfa, lps->reqq);
+}
+
+/**
+ * send logout request to firmware
+ */
+static void
+bfa_lps_send_logout(struct bfa_lps_s *lps)
+{
+ struct bfi_lps_logout_req_s *m;
+
+ m = bfa_reqq_next(lps->bfa, lps->reqq);
+ bfa_assert(m);
+
+ bfi_h2i_set(m->mh, BFI_MC_LPS, BFI_LPS_H2I_LOGOUT_REQ,
+ bfa_lpuid(lps->bfa));
+
+ m->lp_tag = lps->lp_tag;
+ m->port_name = lps->pwwn;
+ bfa_reqq_produce(lps->bfa, lps->reqq);
+}
+
+/**
+ * Indirect login completion handler for non-fcs
+ */
+static void
+bfa_lps_login_comp_cb(void *arg, bfa_boolean_t complete)
+{
+ struct bfa_lps_s *lps = arg;
+
+ if (!complete)
+ return;
+
+ if (lps->fdisc)
+ bfa_cb_lps_fdisc_comp(lps->bfa->bfad, lps->uarg, lps->status);
+ else
+ bfa_cb_lps_flogi_comp(lps->bfa->bfad, lps->uarg, lps->status);
+}
+
+/**
+ * Login completion handler -- direct call for fcs, queue for others
+ */
+static void
+bfa_lps_login_comp(struct bfa_lps_s *lps)
+{
+ if (!lps->bfa->fcs) {
+ bfa_cb_queue(lps->bfa, &lps->hcb_qe,
+ bfa_lps_login_comp_cb, lps);
+ return;
+ }
+
+ if (lps->fdisc)
+ bfa_cb_lps_fdisc_comp(lps->bfa->bfad, lps->uarg, lps->status);
+ else
+ bfa_cb_lps_flogi_comp(lps->bfa->bfad, lps->uarg, lps->status);
+}
+
+/**
+ * Indirect logout completion handler for non-fcs
+ */
+static void
+bfa_lps_logout_comp_cb(void *arg, bfa_boolean_t complete)
+{
+ struct bfa_lps_s *lps = arg;
+
+ if (!complete)
+ return;
+
+ if (lps->fdisc)
+ bfa_cb_lps_fdisclogo_comp(lps->bfa->bfad, lps->uarg);
+ else
+ bfa_cb_lps_flogo_comp(lps->bfa->bfad, lps->uarg);
+}
+
+/**
+ * Logout completion handler -- direct call for fcs, queue for others
+ */
+static void
+bfa_lps_logout_comp(struct bfa_lps_s *lps)
+{
+ if (!lps->bfa->fcs) {
+ bfa_cb_queue(lps->bfa, &lps->hcb_qe,
+ bfa_lps_logout_comp_cb, lps);
+ return;
+ }
+ if (lps->fdisc)
+ bfa_cb_lps_fdisclogo_comp(lps->bfa->bfad, lps->uarg);
+ else
+ bfa_cb_lps_flogo_comp(lps->bfa->bfad, lps->uarg);
+}
+
+
+
+/**
+ * lps_public BFA LPS public functions
+ */
+
+/**
+ * Allocate a lport srvice tag.
+ */
+struct bfa_lps_s *
+bfa_lps_alloc(struct bfa_s *bfa)
+{
+ struct bfa_lps_mod_s *mod = BFA_LPS_MOD(bfa);
+ struct bfa_lps_s *lps = NULL;
+
+ bfa_q_deq(&mod->lps_free_q, &lps);
+
+ if (lps == NULL)
+ return NULL;
+
+ list_add_tail(&lps->qe, &mod->lps_active_q);
+
+ bfa_sm_set_state(lps, bfa_lps_sm_init);
+ return lps;
+}
+
+/**
+ * Free lport service tag. This can be called anytime after an alloc.
+ * No need to wait for any pending login/logout completions.
+ */
+void
+bfa_lps_delete(struct bfa_lps_s *lps)
+{
+ bfa_sm_send_event(lps, BFA_LPS_SM_DELETE);
+}
+
+/**
+ * Initiate a lport login.
+ */
+void
+bfa_lps_flogi(struct bfa_lps_s *lps, void *uarg, u8 alpa, u16 pdusz,
+ wwn_t pwwn, wwn_t nwwn, bfa_boolean_t auth_en)
+{
+ lps->uarg = uarg;
+ lps->alpa = alpa;
+ lps->pdusz = pdusz;
+ lps->pwwn = pwwn;
+ lps->nwwn = nwwn;
+ lps->fdisc = BFA_FALSE;
+ lps->auth_en = auth_en;
+ bfa_sm_send_event(lps, BFA_LPS_SM_LOGIN);
+}
+
+/**
+ * Initiate a lport fdisc login.
+ */
+void
+bfa_lps_fdisc(struct bfa_lps_s *lps, void *uarg, u16 pdusz, wwn_t pwwn,
+ wwn_t nwwn)
+{
+ lps->uarg = uarg;
+ lps->alpa = 0;
+ lps->pdusz = pdusz;
+ lps->pwwn = pwwn;
+ lps->nwwn = nwwn;
+ lps->fdisc = BFA_TRUE;
+ lps->auth_en = BFA_FALSE;
+ bfa_sm_send_event(lps, BFA_LPS_SM_LOGIN);
+}
+
+/**
+ * Initiate a lport logout (flogi).
+ */
+void
+bfa_lps_flogo(struct bfa_lps_s *lps)
+{
+ bfa_sm_send_event(lps, BFA_LPS_SM_LOGOUT);
+}
+
+/**
+ * Initiate a lport FDSIC logout.
+ */
+void
+bfa_lps_fdisclogo(struct bfa_lps_s *lps)
+{
+ bfa_sm_send_event(lps, BFA_LPS_SM_LOGOUT);
+}
+
+/**
+ * Discard a pending login request -- should be called only for
+ * link down handling.
+ */
+void
+bfa_lps_discard(struct bfa_lps_s *lps)
+{
+ bfa_sm_send_event(lps, BFA_LPS_SM_OFFLINE);
+}
+
+/**
+ * Return lport services tag
+ */
+u8
+bfa_lps_get_tag(struct bfa_lps_s *lps)
+{
+ return lps->lp_tag;
+}
+
+/**
+ * Return lport services tag given the pid
+ */
+u8
+bfa_lps_get_tag_from_pid(struct bfa_s *bfa, u32 pid)
+{
+ struct bfa_lps_mod_s *mod = BFA_LPS_MOD(bfa);
+ struct bfa_lps_s *lps;
+ int i;
+
+ for (i = 0, lps = mod->lps_arr; i < mod->num_lps; i++, lps++) {
+ if (lps->lp_pid == pid)
+ return lps->lp_tag;
+ }
+
+ /* Return base port tag anyway */
+ return 0;
+}
+
+/**
+ * return if fabric login indicates support for NPIV
+ */
+bfa_boolean_t
+bfa_lps_is_npiv_en(struct bfa_lps_s *lps)
+{
+ return lps->npiv_en;
+}
+
+/**
+ * Return TRUE if attached to F-Port, else return FALSE
+ */
+bfa_boolean_t
+bfa_lps_is_fport(struct bfa_lps_s *lps)
+{
+ return lps->fport;
+}
+
+/**
+ * Return TRUE if attached to a Brocade Fabric
+ */
+bfa_boolean_t
+bfa_lps_is_brcd_fabric(struct bfa_lps_s *lps)
+{
+ return lps->brcd_switch;
+}
+/**
+ * return TRUE if authentication is required
+ */
+bfa_boolean_t
+bfa_lps_is_authreq(struct bfa_lps_s *lps)
+{
+ return lps->auth_req;
+}
+
+bfa_eproto_status_t
+bfa_lps_get_extstatus(struct bfa_lps_s *lps)
+{
+ return lps->ext_status;
+}
+
+/**
+ * return port id assigned to the lport
+ */
+u32
+bfa_lps_get_pid(struct bfa_lps_s *lps)
+{
+ return lps->lp_pid;
+}
+
+/**
+ * Return bb_credit assigned in FLOGI response
+ */
+u16
+bfa_lps_get_peer_bbcredit(struct bfa_lps_s *lps)
+{
+ return lps->pr_bbcred;
+}
+
+/**
+ * Return peer port name
+ */
+wwn_t
+bfa_lps_get_peer_pwwn(struct bfa_lps_s *lps)
+{
+ return lps->pr_pwwn;
+}
+
+/**
+ * Return peer node name
+ */
+wwn_t
+bfa_lps_get_peer_nwwn(struct bfa_lps_s *lps)
+{
+ return lps->pr_nwwn;
+}
+
+/**
+ * return reason code if login request is rejected
+ */
+u8
+bfa_lps_get_lsrjt_rsn(struct bfa_lps_s *lps)
+{
+ return lps->lsrjt_rsn;
+}
+
+/**
+ * return explanation code if login request is rejected
+ */
+u8
+bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps)
+{
+ return lps->lsrjt_expl;
+}
+
+
+/**
+ * LPS firmware message class handler.
+ */
+void
+bfa_lps_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+ union bfi_lps_i2h_msg_u msg;
+
+ bfa_trc(bfa, m->mhdr.msg_id);
+ msg.msg = m;
+
+ switch (m->mhdr.msg_id) {
+ case BFI_LPS_H2I_LOGIN_RSP:
+ bfa_lps_login_rsp(bfa, msg.login_rsp);
+ break;
+
+ case BFI_LPS_H2I_LOGOUT_RSP:
+ bfa_lps_logout_rsp(bfa, msg.logout_rsp);
+ break;
+
+ default:
+ bfa_trc(bfa, m->mhdr.msg_id);
+ bfa_assert(0);
+ }
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_LPS_PRIV_H__
+#define __BFA_LPS_PRIV_H__
+
+#include <bfa_svc.h>
+
+struct bfa_lps_mod_s {
+ struct list_head lps_free_q;
+ struct list_head lps_active_q;
+ struct bfa_lps_s *lps_arr;
+ int num_lps;
+};
+
+#define BFA_LPS_MOD(__bfa) (&(__bfa)->modules.lps_mod)
+#define BFA_LPS_FROM_TAG(__mod, __tag) (&(__mod)->lps_arr[__tag])
+
+/*
+ * external functions
+ */
+void bfa_lps_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+
+#endif /* __BFA_LPS_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <bfa.h>
+#include <defs/bfa_defs_pci.h>
+#include <cs/bfa_debug.h>
+#include <bfa_iocfc.h>
+
+/**
+ * BFA module list terminated by NULL
+ */
+struct bfa_module_s *hal_mods[] = {
+ &hal_mod_sgpg,
+ &hal_mod_pport,
+ &hal_mod_fcxp,
+ &hal_mod_lps,
+ &hal_mod_uf,
+ &hal_mod_rport,
+ &hal_mod_fcpim,
+#ifdef BFA_CFG_PBIND
+ &hal_mod_pbind,
+#endif
+ NULL
+};
+
+/**
+ * Message handlers for various modules.
+ */
+bfa_isr_func_t bfa_isrs[BFI_MC_MAX] = {
+ bfa_isr_unhandled, /* NONE */
+ bfa_isr_unhandled, /* BFI_MC_IOC */
+ bfa_isr_unhandled, /* BFI_MC_DIAG */
+ bfa_isr_unhandled, /* BFI_MC_FLASH */
+ bfa_isr_unhandled, /* BFI_MC_CEE */
+ bfa_pport_isr, /* BFI_MC_PORT */
+ bfa_isr_unhandled, /* BFI_MC_IOCFC */
+ bfa_isr_unhandled, /* BFI_MC_LL */
+ bfa_uf_isr, /* BFI_MC_UF */
+ bfa_fcxp_isr, /* BFI_MC_FCXP */
+ bfa_lps_isr, /* BFI_MC_LPS */
+ bfa_rport_isr, /* BFI_MC_RPORT */
+ bfa_itnim_isr, /* BFI_MC_ITNIM */
+ bfa_isr_unhandled, /* BFI_MC_IOIM_READ */
+ bfa_isr_unhandled, /* BFI_MC_IOIM_WRITE */
+ bfa_isr_unhandled, /* BFI_MC_IOIM_IO */
+ bfa_ioim_isr, /* BFI_MC_IOIM */
+ bfa_ioim_good_comp_isr, /* BFI_MC_IOIM_IOCOM */
+ bfa_tskim_isr, /* BFI_MC_TSKIM */
+ bfa_isr_unhandled, /* BFI_MC_SBOOT */
+ bfa_isr_unhandled, /* BFI_MC_IPFC */
+ bfa_isr_unhandled, /* BFI_MC_PORT */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+ bfa_isr_unhandled, /* --------- */
+};
+
+/**
+ * Message handlers for mailbox command classes
+ */
+bfa_ioc_mbox_mcfunc_t bfa_mbox_isrs[BFI_MC_MAX] = {
+ NULL,
+ NULL, /* BFI_MC_IOC */
+ NULL, /* BFI_MC_DIAG */
+ NULL, /* BFI_MC_FLASH */
+ NULL, /* BFI_MC_CEE */
+ NULL, /* BFI_MC_PORT */
+ bfa_iocfc_isr, /* BFI_MC_IOCFC */
+ NULL,
+};
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_MODULES_PRIV_H__
+#define __BFA_MODULES_PRIV_H__
+
+#include "bfa_uf_priv.h"
+#include "bfa_port_priv.h"
+#include "bfa_rport_priv.h"
+#include "bfa_fcxp_priv.h"
+#include "bfa_lps_priv.h"
+#include "bfa_fcpim_priv.h"
+#include <cee/bfa_cee.h>
+#include <port/bfa_port.h>
+
+
+struct bfa_modules_s {
+ struct bfa_pport_s pport; /* physical port module */
+ struct bfa_fcxp_mod_s fcxp_mod; /* fcxp module */
+ struct bfa_lps_mod_s lps_mod; /* fcxp module */
+ struct bfa_uf_mod_s uf_mod; /* unsolicited frame module */
+ struct bfa_rport_mod_s rport_mod; /* remote port module */
+ struct bfa_fcpim_mod_s fcpim_mod; /* FCP initiator module */
+ struct bfa_sgpg_mod_s sgpg_mod; /* SG page module */
+ struct bfa_cee_s cee; /* CEE Module */
+ struct bfa_port_s port; /* Physical port module */
+};
+
+#endif /* __BFA_MODULES_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * Contains declarations all OS Specific files needed for BFA layer
+ */
+
+#ifndef __BFA_OS_INC_H__
+#define __BFA_OS_INC_H__
+
+#ifndef __KERNEL__
+#include <stdint.h>
+#else
+#include <linux/types.h>
+
+#include <linux/version.h>
+#include <linux/pci.h>
+
+#include <linux/dma-mapping.h>
+#define SET_MODULE_VERSION(VER)
+
+#include <linux/idr.h>
+
+#include <linux/interrupt.h>
+#include <linux/cdev.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+
+#include <linux/workqueue.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_transport.h>
+
+#define BFA_ERR KERN_ERR
+#define BFA_WARNING KERN_WARNING
+#define BFA_NOTICE KERN_NOTICE
+#define BFA_INFO KERN_INFO
+#define BFA_DEBUG KERN_DEBUG
+
+#define LOG_BFAD_INIT 0x00000001
+#define LOG_FCP_IO 0x00000002
+
+#ifdef DEBUG
+#define BFA_LOG_TRACE(bfad, level, mask, fmt, arg...) \
+ BFA_LOG(bfad, level, mask, fmt, ## arg)
+#define BFA_DEV_TRACE(bfad, level, fmt, arg...) \
+ BFA_DEV_PRINTF(bfad, level, fmt, ## arg)
+#define BFA_TRACE(level, fmt, arg...) \
+ BFA_PRINTF(level, fmt, ## arg)
+#else
+#define BFA_LOG_TRACE(bfad, level, mask, fmt, arg...)
+#define BFA_DEV_TRACE(bfad, level, fmt, arg...)
+#define BFA_TRACE(level, fmt, arg...)
+#endif
+
+#define BFA_ASSERT(p) do { \
+ if (!(p)) { \
+ printk(KERN_ERR "assert(%s) failed at %s:%d\n", \
+ #p, __FILE__, __LINE__); \
+ BUG(); \
+ } \
+} while (0)
+
+
+#define BFA_LOG(bfad, level, mask, fmt, arg...) \
+do { \
+ if (((mask) & (((struct bfad_s *)(bfad))-> \
+ cfg_data[cfg_log_mask])) || (level[1] <= '3')) \
+ dev_printk(level, &(((struct bfad_s *) \
+ (bfad))->pcidev->dev), fmt, ##arg); \
+} while (0)
+
+#ifndef BFA_DEV_PRINTF
+#define BFA_DEV_PRINTF(bfad, level, fmt, arg...) \
+ dev_printk(level, &(((struct bfad_s *) \
+ (bfad))->pcidev->dev), fmt, ##arg);
+#endif
+
+#define BFA_PRINTF(level, fmt, arg...) \
+ printk(level fmt, ##arg);
+
+int bfa_os_MWB(void *);
+
+#define bfa_os_mmiowb() mmiowb()
+
+#define bfa_swap_3b(_x) \
+ ((((_x) & 0xff) << 16) | \
+ ((_x) & 0x00ff00) | \
+ (((_x) & 0xff0000) >> 16))
+
+#define bfa_swap_8b(_x) \
+ ((((_x) & 0xff00000000000000ull) >> 56) \
+ | (((_x) & 0x00ff000000000000ull) >> 40) \
+ | (((_x) & 0x0000ff0000000000ull) >> 24) \
+ | (((_x) & 0x000000ff00000000ull) >> 8) \
+ | (((_x) & 0x00000000ff000000ull) << 8) \
+ | (((_x) & 0x0000000000ff0000ull) << 24) \
+ | (((_x) & 0x000000000000ff00ull) << 40) \
+ | (((_x) & 0x00000000000000ffull) << 56))
+
+#define bfa_os_swap32(_x) \
+ ((((_x) & 0xff) << 24) | \
+ (((_x) & 0x0000ff00) << 8) | \
+ (((_x) & 0x00ff0000) >> 8) | \
+ (((_x) & 0xff000000) >> 24))
+
+
+#ifndef __BIGENDIAN
+#define bfa_os_htons(_x) ((u16)((((_x) & 0xff00) >> 8) | \
+ (((_x) & 0x00ff) << 8)))
+
+#define bfa_os_htonl(_x) bfa_os_swap32(_x)
+#define bfa_os_htonll(_x) bfa_swap_8b(_x)
+#define bfa_os_hton3b(_x) bfa_swap_3b(_x)
+
+#define bfa_os_wtole(_x) (_x)
+
+#else
+
+#define bfa_os_htons(_x) (_x)
+#define bfa_os_htonl(_x) (_x)
+#define bfa_os_hton3b(_x) (_x)
+#define bfa_os_htonll(_x) (_x)
+#define bfa_os_wtole(_x) bfa_os_swap32(_x)
+
+#endif
+
+#define bfa_os_ntohs(_x) bfa_os_htons(_x)
+#define bfa_os_ntohl(_x) bfa_os_htonl(_x)
+#define bfa_os_ntohll(_x) bfa_os_htonll(_x)
+#define bfa_os_ntoh3b(_x) bfa_os_hton3b(_x)
+
+#define bfa_os_u32(__pa64) ((__pa64) >> 32)
+
+#define bfa_os_memset memset
+#define bfa_os_memcpy memcpy
+#define bfa_os_udelay udelay
+#define bfa_os_vsprintf vsprintf
+
+#define bfa_os_assign(__t, __s) __t = __s
+
+#define bfa_os_addr_t char __iomem *
+#define bfa_os_panic()
+
+#define bfa_os_reg_read(_raddr) bfa_os_wtole(readl(_raddr))
+#define bfa_os_reg_write(_raddr, _val) writel(bfa_os_wtole((_val)), (_raddr))
+#define bfa_os_mem_read(_raddr, _off) \
+ bfa_os_ntohl(readl(((_raddr) + (_off))))
+#define bfa_os_mem_write(_raddr, _off, _val) \
+ writel(bfa_os_htonl((_val)), ((_raddr) + (_off)))
+
+#define BFA_TRC_TS(_trcm) \
+ ({ \
+ struct timeval tv; \
+ \
+ do_gettimeofday(&tv); \
+ (tv.tv_sec*1000000+tv.tv_usec); \
+ })
+
+struct bfa_log_mod_s;
+void bfa_os_printf(struct bfa_log_mod_s *log_mod, u32 msg_id,
+ const char *fmt, ...);
+#endif
+
+#define boolean_t int
+
+/**
+ * For current time stamp, OS API will fill-in
+ */
+struct bfa_timeval_s {
+ u32 tv_sec; /* seconds */
+ u32 tv_usec; /* microseconds */
+};
+
+void bfa_os_gettimeofday(struct bfa_timeval_s *tv);
+
+static inline void
+wwn2str(char *wwn_str, u64 wwn)
+{
+ union {
+ u64 wwn;
+ u8 byte[8];
+ } w;
+
+ w.wwn = wwn;
+ sprintf(wwn_str, "%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x", w.byte[0],
+ w.byte[1], w.byte[2], w.byte[3], w.byte[4], w.byte[5],
+ w.byte[6], w.byte[7]);
+}
+
+static inline void
+fcid2str(char *fcid_str, u32 fcid)
+{
+ union {
+ u32 fcid;
+ u8 byte[4];
+ } f;
+
+ f.fcid = fcid;
+ sprintf(fcid_str, "%02x:%02x:%02x", f.byte[1], f.byte[2], f.byte[3]);
+}
+
+#endif /* __BFA_OS_INC_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <defs/bfa_defs_port.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+#include <cs/bfa_debug.h>
+#include <port/bfa_port.h>
+#include <bfi/bfi.h>
+#include <bfi/bfi_port.h>
+#include <bfa_ioc.h>
+#include <cna/bfa_cna_trcmod.h>
+
+BFA_TRC_FILE(CNA, PORT);
+
+#define bfa_ioc_portid(__ioc) ((__ioc)->port_id)
+#define bfa_lpuid(__arg) bfa_ioc_portid(&(__arg)->ioc)
+
+static void
+bfa_port_stats_swap(struct bfa_port_s *port, union bfa_pport_stats_u *stats)
+{
+ u32 *dip = (u32 *) stats;
+ u32 t0, t1;
+ int i;
+
+ for (i = 0; i < sizeof(union bfa_pport_stats_u) / sizeof(u32);
+ i += 2) {
+ t0 = dip[i];
+ t1 = dip[i + 1];
+#ifdef __BIGENDIAN
+ dip[i] = bfa_os_ntohl(t0);
+ dip[i + 1] = bfa_os_ntohl(t1);
+#else
+ dip[i] = bfa_os_ntohl(t1);
+ dip[i + 1] = bfa_os_ntohl(t0);
+#endif
+ }
+
+ /** todo
+ * QoS stats r also swapped as 64bit; that structure also
+ * has to use 64 bit counters
+ */
+}
+
+/**
+ * bfa_port_enable_isr()
+ *
+ *
+ * @param[in] port - Pointer to the port module
+ * status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_port_enable_isr(struct bfa_port_s *port, bfa_status_t status)
+{
+ bfa_assert(0);
+}
+
+/**
+ * bfa_port_disable_isr()
+ *
+ *
+ * @param[in] port - Pointer to the port module
+ * status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_port_disable_isr(struct bfa_port_s *port, bfa_status_t status)
+{
+ bfa_assert(0);
+}
+
+/**
+ * bfa_port_get_stats_isr()
+ *
+ *
+ * @param[in] port - Pointer to the Port module
+ * status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_port_get_stats_isr(struct bfa_port_s *port, bfa_status_t status)
+{
+ port->stats_status = status;
+ port->stats_busy = BFA_FALSE;
+
+ if (status == BFA_STATUS_OK) {
+ memcpy(port->stats, port->stats_dma.kva,
+ sizeof(union bfa_pport_stats_u));
+ bfa_port_stats_swap(port, port->stats);
+ }
+
+ if (port->stats_cbfn) {
+ port->stats_cbfn(port->stats_cbarg, status);
+ port->stats_cbfn = NULL;
+ }
+}
+
+/**
+ * bfa_port_clear_stats_isr()
+ *
+ *
+ * @param[in] port - Pointer to the Port module
+ * status - Return status from the f/w
+ *
+ * @return void
+ */
+static void
+bfa_port_clear_stats_isr(struct bfa_port_s *port, bfa_status_t status)
+{
+ port->stats_status = status;
+ port->stats_busy = BFA_FALSE;
+
+ if (port->stats_cbfn) {
+ port->stats_cbfn(port->stats_cbarg, status);
+ port->stats_cbfn = NULL;
+ }
+}
+
+/**
+ * bfa_port_isr()
+ *
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return void
+ */
+static void
+bfa_port_isr(void *cbarg, struct bfi_mbmsg_s *m)
+{
+ struct bfa_port_s *port = (struct bfa_port_s *)cbarg;
+ union bfi_port_i2h_msg_u *i2hmsg;
+
+ i2hmsg = (union bfi_port_i2h_msg_u *)m;
+ bfa_trc(port, m->mh.msg_id);
+
+ switch (m->mh.msg_id) {
+ case BFI_PORT_I2H_ENABLE_RSP:
+ if (port->endis_pending == BFA_FALSE)
+ break;
+ bfa_port_enable_isr(port, i2hmsg->enable_rsp.status);
+ break;
+
+ case BFI_PORT_I2H_DISABLE_RSP:
+ if (port->endis_pending == BFA_FALSE)
+ break;
+ bfa_port_disable_isr(port, i2hmsg->disable_rsp.status);
+ break;
+
+ case BFI_PORT_I2H_GET_STATS_RSP:
+ /*
+ * Stats busy flag is still set? (may be cmd timed out)
+ */
+ if (port->stats_busy == BFA_FALSE)
+ break;
+ bfa_port_get_stats_isr(port, i2hmsg->getstats_rsp.status);
+ break;
+
+ case BFI_PORT_I2H_CLEAR_STATS_RSP:
+ if (port->stats_busy == BFA_FALSE)
+ break;
+ bfa_port_clear_stats_isr(port, i2hmsg->clearstats_rsp.status);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * bfa_port_meminfo()
+ *
+ *
+ * @param[in] void
+ *
+ * @return Size of DMA region
+ */
+u32
+bfa_port_meminfo(void)
+{
+ return BFA_ROUNDUP(sizeof(union bfa_pport_stats_u), BFA_DMA_ALIGN_SZ);
+}
+
+/**
+ * bfa_port_mem_claim()
+ *
+ *
+ * @param[in] port Port module pointer
+ * dma_kva Kernel Virtual Address of Port DMA Memory
+ * dma_pa Physical Address of Port DMA Memory
+ *
+ * @return void
+ */
+void
+bfa_port_mem_claim(struct bfa_port_s *port, u8 *dma_kva, u64 dma_pa)
+{
+ port->stats_dma.kva = dma_kva;
+ port->stats_dma.pa = dma_pa;
+}
+
+/**
+ * bfa_port_enable()
+ *
+ * Send the Port enable request to the f/w
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return Status
+ */
+bfa_status_t
+bfa_port_enable(struct bfa_port_s *port, bfa_port_endis_cbfn_t cbfn,
+ void *cbarg)
+{
+ struct bfi_port_generic_req_s *m;
+
+ /** todo Not implemented */
+ bfa_assert(0);
+
+ if (!bfa_ioc_is_operational(port->ioc)) {
+ bfa_trc(port, BFA_STATUS_IOC_FAILURE);
+ return BFA_STATUS_IOC_FAILURE;
+ }
+
+ if (port->endis_pending) {
+ bfa_trc(port, BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
+ }
+
+ m = (struct bfi_port_generic_req_s *)port->endis_mb.msg;
+
+ port->msgtag++;
+ port->endis_cbfn = cbfn;
+ port->endis_cbarg = cbarg;
+ port->endis_pending = BFA_TRUE;
+
+ bfi_h2i_set(m->mh, BFI_MC_PORT, BFI_PORT_H2I_ENABLE_REQ,
+ bfa_ioc_portid(port->ioc));
+ bfa_ioc_mbox_queue(port->ioc, &port->endis_mb);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_port_disable()
+ *
+ * Send the Port disable request to the f/w
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return Status
+ */
+bfa_status_t
+bfa_port_disable(struct bfa_port_s *port, bfa_port_endis_cbfn_t cbfn,
+ void *cbarg)
+{
+ struct bfi_port_generic_req_s *m;
+
+ /** todo Not implemented */
+ bfa_assert(0);
+
+ if (!bfa_ioc_is_operational(port->ioc)) {
+ bfa_trc(port, BFA_STATUS_IOC_FAILURE);
+ return BFA_STATUS_IOC_FAILURE;
+ }
+
+ if (port->endis_pending) {
+ bfa_trc(port, BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
+ }
+
+ m = (struct bfi_port_generic_req_s *)port->endis_mb.msg;
+
+ port->msgtag++;
+ port->endis_cbfn = cbfn;
+ port->endis_cbarg = cbarg;
+ port->endis_pending = BFA_TRUE;
+
+ bfi_h2i_set(m->mh, BFI_MC_PORT, BFI_PORT_H2I_DISABLE_REQ,
+ bfa_ioc_portid(port->ioc));
+ bfa_ioc_mbox_queue(port->ioc, &port->endis_mb);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_port_get_stats()
+ *
+ * Send the request to the f/w to fetch Port statistics.
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return Status
+ */
+bfa_status_t
+bfa_port_get_stats(struct bfa_port_s *port, union bfa_pport_stats_u *stats,
+ bfa_port_stats_cbfn_t cbfn, void *cbarg)
+{
+ struct bfi_port_get_stats_req_s *m;
+
+ if (!bfa_ioc_is_operational(port->ioc)) {
+ bfa_trc(port, BFA_STATUS_IOC_FAILURE);
+ return BFA_STATUS_IOC_FAILURE;
+ }
+
+ if (port->stats_busy) {
+ bfa_trc(port, BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
+ }
+
+ m = (struct bfi_port_get_stats_req_s *)port->stats_mb.msg;
+
+ port->stats = stats;
+ port->stats_cbfn = cbfn;
+ port->stats_cbarg = cbarg;
+ port->stats_busy = BFA_TRUE;
+ bfa_dma_be_addr_set(m->dma_addr, port->stats_dma.pa);
+
+ bfi_h2i_set(m->mh, BFI_MC_PORT, BFI_PORT_H2I_GET_STATS_REQ,
+ bfa_ioc_portid(port->ioc));
+ bfa_ioc_mbox_queue(port->ioc, &port->stats_mb);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_port_clear_stats()
+ *
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return Status
+ */
+bfa_status_t
+bfa_port_clear_stats(struct bfa_port_s *port, bfa_port_stats_cbfn_t cbfn,
+ void *cbarg)
+{
+ struct bfi_port_generic_req_s *m;
+
+ if (!bfa_ioc_is_operational(port->ioc)) {
+ bfa_trc(port, BFA_STATUS_IOC_FAILURE);
+ return BFA_STATUS_IOC_FAILURE;
+ }
+
+ if (port->stats_busy) {
+ bfa_trc(port, BFA_STATUS_DEVBUSY);
+ return BFA_STATUS_DEVBUSY;
+ }
+
+ m = (struct bfi_port_generic_req_s *)port->stats_mb.msg;
+
+ port->stats_cbfn = cbfn;
+ port->stats_cbarg = cbarg;
+ port->stats_busy = BFA_TRUE;
+
+ bfi_h2i_set(m->mh, BFI_MC_PORT, BFI_PORT_H2I_CLEAR_STATS_REQ,
+ bfa_ioc_portid(port->ioc));
+ bfa_ioc_mbox_queue(port->ioc, &port->stats_mb);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * bfa_port_hbfail()
+ *
+ *
+ * @param[in] Pointer to the Port module data structure.
+ *
+ * @return void
+ */
+void
+bfa_port_hbfail(void *arg)
+{
+ struct bfa_port_s *port = (struct bfa_port_s *)arg;
+
+ /*
+ * Fail any pending get_stats/clear_stats requests
+ */
+ if (port->stats_busy) {
+ if (port->stats_cbfn)
+ port->stats_cbfn(port->dev, BFA_STATUS_FAILED);
+ port->stats_cbfn = NULL;
+ port->stats_busy = BFA_FALSE;
+ }
+
+ /*
+ * Clear any enable/disable is pending
+ */
+ if (port->endis_pending) {
+ if (port->endis_cbfn)
+ port->endis_cbfn(port->dev, BFA_STATUS_FAILED);
+ port->endis_cbfn = NULL;
+ port->endis_pending = BFA_FALSE;
+ }
+}
+
+/**
+ * bfa_port_attach()
+ *
+ *
+ * @param[in] port - Pointer to the Port module data structure
+ * ioc - Pointer to the ioc module data structure
+ * dev - Pointer to the device driver module data structure
+ * The device driver specific mbox ISR functions have
+ * this pointer as one of the parameters.
+ * trcmod -
+ * logmod -
+ *
+ * @return void
+ */
+void
+bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc, void *dev,
+ struct bfa_trc_mod_s *trcmod, struct bfa_log_mod_s *logmod)
+{
+ bfa_assert(port);
+
+ port->dev = dev;
+ port->ioc = ioc;
+ port->trcmod = trcmod;
+ port->logmod = logmod;
+
+ port->stats_busy = port->endis_pending = BFA_FALSE;
+ port->stats_cbfn = port->endis_cbfn = NULL;
+
+ bfa_ioc_mbox_regisr(port->ioc, BFI_MC_PORT, bfa_port_isr, port);
+ bfa_ioc_hbfail_init(&port->hbfail, bfa_port_hbfail, port);
+ bfa_ioc_hbfail_register(port->ioc, &port->hbfail);
+
+ bfa_trc(port, 0);
+}
+
+/**
+ * bfa_port_detach()
+ *
+ *
+ * @param[in] port - Pointer to the Port module data structure
+ *
+ * @return void
+ */
+void
+bfa_port_detach(struct bfa_port_s *port)
+{
+ bfa_trc(port, 0);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_PORT_PRIV_H__
+#define __BFA_PORT_PRIV_H__
+
+#include <defs/bfa_defs_pport.h>
+#include <bfi/bfi_pport.h>
+#include "bfa_intr_priv.h"
+
+/**
+ * BFA physical port data structure
+ */
+struct bfa_pport_s {
+ struct bfa_s *bfa; /* parent BFA instance */
+ bfa_sm_t sm; /* port state machine */
+ wwn_t nwwn; /* node wwn of physical port */
+ wwn_t pwwn; /* port wwn of physical oprt */
+ enum bfa_pport_speed speed_sup;
+ /* supported speeds */
+ enum bfa_pport_speed speed; /* current speed */
+ enum bfa_pport_topology topology; /* current topology */
+ u8 myalpa; /* my ALPA in LOOP topology */
+ u8 rsvd[3];
+ struct bfa_pport_cfg_s cfg; /* current port configuration */
+ struct bfa_qos_attr_s qos_attr; /* QoS Attributes */
+ struct bfa_qos_vc_attr_s qos_vc_attr; /* VC info from ELP */
+ struct bfa_reqq_wait_s reqq_wait;
+ /* to wait for room in reqq */
+ struct bfa_reqq_wait_s svcreq_wait;
+ /* to wait for room in reqq */
+ struct bfa_reqq_wait_s stats_reqq_wait;
+ /* to wait for room in reqq (stats) */
+ void *event_cbarg;
+ void (*event_cbfn) (void *cbarg,
+ bfa_pport_event_t event);
+ union {
+ union bfi_pport_i2h_msg_u i2hmsg;
+ } event_arg;
+ void *bfad; /* BFA driver handle */
+ struct bfa_cb_qe_s hcb_qe; /* BFA callback queue elem */
+ enum bfa_pport_linkstate hcb_event;
+ /* link event for callback */
+ u32 msgtag; /* fimrware msg tag for reply */
+ u8 *stats_kva;
+ u64 stats_pa;
+ union bfa_pport_stats_u *stats; /* pport stats */
+ u32 mypid : 24;
+ u32 rsvd_b : 8;
+ struct bfa_timer_s timer; /* timer */
+ union bfa_pport_stats_u *stats_ret;
+ /* driver stats location */
+ bfa_status_t stats_status;
+ /* stats/statsclr status */
+ bfa_boolean_t stats_busy;
+ /* outstanding stats/statsclr */
+ bfa_boolean_t stats_qfull;
+ bfa_boolean_t diag_busy;
+ /* diag busy status */
+ bfa_boolean_t beacon;
+ /* port beacon status */
+ bfa_boolean_t link_e2e_beacon;
+ /* link beacon status */
+ bfa_cb_pport_t stats_cbfn;
+ /* driver callback function */
+ void *stats_cbarg;
+ /* *!< user callback arg */
+};
+
+#define BFA_PORT_MOD(__bfa) (&(__bfa)->modules.pport)
+
+/*
+ * public functions
+ */
+void bfa_pport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+#endif /* __BFA_PORT_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_PRIV_H__
+#define __BFA_PRIV_H__
+
+#include "bfa_iocfc.h"
+#include "bfa_intr_priv.h"
+#include "bfa_trcmod_priv.h"
+#include "bfa_modules_priv.h"
+#include "bfa_fwimg_priv.h"
+#include <cs/bfa_log.h>
+#include <bfa_timer.h>
+
+/**
+ * Macro to define a new BFA module
+ */
+#define BFA_MODULE(__mod) \
+ static void bfa_ ## __mod ## _meminfo( \
+ struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len, \
+ u32 *dm_len); \
+ static void bfa_ ## __mod ## _attach(struct bfa_s *bfa, \
+ void *bfad, struct bfa_iocfc_cfg_s *cfg, \
+ struct bfa_meminfo_s *meminfo, \
+ struct bfa_pcidev_s *pcidev); \
+ static void bfa_ ## __mod ## _initdone(struct bfa_s *bfa); \
+ static void bfa_ ## __mod ## _detach(struct bfa_s *bfa); \
+ static void bfa_ ## __mod ## _start(struct bfa_s *bfa); \
+ static void bfa_ ## __mod ## _stop(struct bfa_s *bfa); \
+ static void bfa_ ## __mod ## _iocdisable(struct bfa_s *bfa); \
+ \
+ extern struct bfa_module_s hal_mod_ ## __mod; \
+ struct bfa_module_s hal_mod_ ## __mod = { \
+ bfa_ ## __mod ## _meminfo, \
+ bfa_ ## __mod ## _attach, \
+ bfa_ ## __mod ## _initdone, \
+ bfa_ ## __mod ## _detach, \
+ bfa_ ## __mod ## _start, \
+ bfa_ ## __mod ## _stop, \
+ bfa_ ## __mod ## _iocdisable, \
+ }
+
+#define BFA_CACHELINE_SZ (256)
+
+/**
+ * Structure used to interact between different BFA sub modules
+ *
+ * Each sub module needs to implement only the entry points relevant to it (and
+ * can leave entry points as NULL)
+ */
+struct bfa_module_s {
+ void (*meminfo) (struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+ u32 *dm_len);
+ void (*attach) (struct bfa_s *bfa, void *bfad,
+ struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo,
+ struct bfa_pcidev_s *pcidev);
+ void (*initdone) (struct bfa_s *bfa);
+ void (*detach) (struct bfa_s *bfa);
+ void (*start) (struct bfa_s *bfa);
+ void (*stop) (struct bfa_s *bfa);
+ void (*iocdisable) (struct bfa_s *bfa);
+};
+
+extern struct bfa_module_s *hal_mods[];
+
+struct bfa_s {
+ void *bfad; /* BFA driver instance */
+ struct bfa_aen_s *aen; /* AEN module */
+ struct bfa_plog_s *plog; /* portlog buffer */
+ struct bfa_log_mod_s *logm; /* driver logging modulen */
+ struct bfa_trc_mod_s *trcmod; /* driver tracing */
+ struct bfa_ioc_s ioc; /* IOC module */
+ struct bfa_iocfc_s iocfc; /* IOCFC module */
+ struct bfa_timer_mod_s timer_mod; /* timer module */
+ struct bfa_modules_s modules; /* BFA modules */
+ struct list_head comp_q; /* pending completions */
+ bfa_boolean_t rme_process; /* RME processing enabled */
+ struct list_head reqq_waitq[BFI_IOC_MAX_CQS];
+ bfa_boolean_t fcs; /* FCS is attached to BFA */
+ struct bfa_msix_s msix;
+};
+
+extern bfa_isr_func_t bfa_isrs[BFI_MC_MAX];
+extern bfa_ioc_mbox_mcfunc_t bfa_mbox_isrs[];
+extern bfa_boolean_t bfa_auto_recover;
+extern struct bfa_module_s hal_mod_flash;
+extern struct bfa_module_s hal_mod_fcdiag;
+extern struct bfa_module_s hal_mod_sgpg;
+extern struct bfa_module_s hal_mod_pport;
+extern struct bfa_module_s hal_mod_fcxp;
+extern struct bfa_module_s hal_mod_lps;
+extern struct bfa_module_s hal_mod_uf;
+extern struct bfa_module_s hal_mod_rport;
+extern struct bfa_module_s hal_mod_fcpim;
+extern struct bfa_module_s hal_mod_pbind;
+
+#endif /* __BFA_PRIV_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <cs/bfa_debug.h>
+#include <bfi/bfi_rport.h>
+#include "bfa_intr_priv.h"
+
+BFA_TRC_FILE(HAL, RPORT);
+BFA_MODULE(rport);
+
+#define bfa_rport_offline_cb(__rp) do { \
+ if ((__rp)->bfa->fcs) \
+ bfa_cb_rport_offline((__rp)->rport_drv); \
+ else { \
+ bfa_cb_queue((__rp)->bfa, &(__rp)->hcb_qe, \
+ __bfa_cb_rport_offline, (__rp)); \
+ } \
+} while (0)
+
+#define bfa_rport_online_cb(__rp) do { \
+ if ((__rp)->bfa->fcs) \
+ bfa_cb_rport_online((__rp)->rport_drv); \
+ else { \
+ bfa_cb_queue((__rp)->bfa, &(__rp)->hcb_qe, \
+ __bfa_cb_rport_online, (__rp)); \
+ } \
+} while (0)
+
+/*
+ * forward declarations
+ */
+static struct bfa_rport_s *bfa_rport_alloc(struct bfa_rport_mod_s *rp_mod);
+static void bfa_rport_free(struct bfa_rport_s *rport);
+static bfa_boolean_t bfa_rport_send_fwcreate(struct bfa_rport_s *rp);
+static bfa_boolean_t bfa_rport_send_fwdelete(struct bfa_rport_s *rp);
+static bfa_boolean_t bfa_rport_send_fwspeed(struct bfa_rport_s *rp);
+static void __bfa_cb_rport_online(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_rport_offline(void *cbarg, bfa_boolean_t complete);
+
+/**
+ * bfa_rport_sm BFA rport state machine
+ */
+
+
+enum bfa_rport_event {
+ BFA_RPORT_SM_CREATE = 1, /* rport create event */
+ BFA_RPORT_SM_DELETE = 2, /* deleting an existing rport */
+ BFA_RPORT_SM_ONLINE = 3, /* rport is online */
+ BFA_RPORT_SM_OFFLINE = 4, /* rport is offline */
+ BFA_RPORT_SM_FWRSP = 5, /* firmware response */
+ BFA_RPORT_SM_HWFAIL = 6, /* IOC h/w failure */
+ BFA_RPORT_SM_QOS_SCN = 7, /* QoS SCN from firmware */
+ BFA_RPORT_SM_SET_SPEED = 8, /* Set Rport Speed */
+ BFA_RPORT_SM_QRESUME = 9, /* space in requeue queue */
+};
+
+static void bfa_rport_sm_uninit(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_created(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_fwcreate(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_online(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_fwdelete(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_offline(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_deleting(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_offline_pending(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_delete_pending(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_iocdisable(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_fwcreate_qfull(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_fwdelete_qfull(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+static void bfa_rport_sm_deleting_qfull(struct bfa_rport_s *rp,
+ enum bfa_rport_event event);
+
+/**
+ * Beginning state, only online event expected.
+ */
+static void
+bfa_rport_sm_uninit(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_CREATE:
+ bfa_stats(rp, sm_un_cr);
+ bfa_sm_set_state(rp, bfa_rport_sm_created);
+ break;
+
+ default:
+ bfa_stats(rp, sm_un_unexp);
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_rport_sm_created(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_ONLINE:
+ bfa_stats(rp, sm_cr_on);
+ if (bfa_rport_send_fwcreate(rp))
+ bfa_sm_set_state(rp, bfa_rport_sm_fwcreate);
+ else
+ bfa_sm_set_state(rp, bfa_rport_sm_fwcreate_qfull);
+ break;
+
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_cr_del);
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+ bfa_rport_free(rp);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_cr_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+ break;
+
+ default:
+ bfa_stats(rp, sm_cr_unexp);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Waiting for rport create response from firmware.
+ */
+static void
+bfa_rport_sm_fwcreate(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_FWRSP:
+ bfa_stats(rp, sm_fwc_rsp);
+ bfa_sm_set_state(rp, bfa_rport_sm_online);
+ bfa_rport_online_cb(rp);
+ break;
+
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_fwc_del);
+ bfa_sm_set_state(rp, bfa_rport_sm_delete_pending);
+ break;
+
+ case BFA_RPORT_SM_OFFLINE:
+ bfa_stats(rp, sm_fwc_off);
+ bfa_sm_set_state(rp, bfa_rport_sm_offline_pending);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_fwc_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+ break;
+
+ default:
+ bfa_stats(rp, sm_fwc_unexp);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Request queue is full, awaiting queue resume to send create request.
+ */
+static void
+bfa_rport_sm_fwcreate_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_QRESUME:
+ bfa_sm_set_state(rp, bfa_rport_sm_fwcreate);
+ bfa_rport_send_fwcreate(rp);
+ break;
+
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_fwc_del);
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+ bfa_reqq_wcancel(&rp->reqq_wait);
+ bfa_rport_free(rp);
+ break;
+
+ case BFA_RPORT_SM_OFFLINE:
+ bfa_stats(rp, sm_fwc_off);
+ bfa_sm_set_state(rp, bfa_rport_sm_offline);
+ bfa_reqq_wcancel(&rp->reqq_wait);
+ bfa_rport_offline_cb(rp);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_fwc_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+ bfa_reqq_wcancel(&rp->reqq_wait);
+ break;
+
+ default:
+ bfa_stats(rp, sm_fwc_unexp);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Online state - normal parking state.
+ */
+static void
+bfa_rport_sm_online(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ struct bfi_rport_qos_scn_s *qos_scn;
+
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_OFFLINE:
+ bfa_stats(rp, sm_on_off);
+ if (bfa_rport_send_fwdelete(rp))
+ bfa_sm_set_state(rp, bfa_rport_sm_fwdelete);
+ else
+ bfa_sm_set_state(rp, bfa_rport_sm_fwdelete_qfull);
+ break;
+
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_on_del);
+ if (bfa_rport_send_fwdelete(rp))
+ bfa_sm_set_state(rp, bfa_rport_sm_deleting);
+ else
+ bfa_sm_set_state(rp, bfa_rport_sm_deleting_qfull);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_on_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+ break;
+
+ case BFA_RPORT_SM_SET_SPEED:
+ bfa_rport_send_fwspeed(rp);
+ break;
+
+ case BFA_RPORT_SM_QOS_SCN:
+ qos_scn = (struct bfi_rport_qos_scn_s *) rp->event_arg.fw_msg;
+ rp->qos_attr = qos_scn->new_qos_attr;
+ bfa_trc(rp->bfa, qos_scn->old_qos_attr.qos_flow_id);
+ bfa_trc(rp->bfa, qos_scn->new_qos_attr.qos_flow_id);
+ bfa_trc(rp->bfa, qos_scn->old_qos_attr.qos_priority);
+ bfa_trc(rp->bfa, qos_scn->new_qos_attr.qos_priority);
+
+ qos_scn->old_qos_attr.qos_flow_id =
+ bfa_os_ntohl(qos_scn->old_qos_attr.qos_flow_id);
+ qos_scn->new_qos_attr.qos_flow_id =
+ bfa_os_ntohl(qos_scn->new_qos_attr.qos_flow_id);
+ qos_scn->old_qos_attr.qos_priority =
+ bfa_os_ntohl(qos_scn->old_qos_attr.qos_priority);
+ qos_scn->new_qos_attr.qos_priority =
+ bfa_os_ntohl(qos_scn->new_qos_attr.qos_priority);
+
+ if (qos_scn->old_qos_attr.qos_flow_id !=
+ qos_scn->new_qos_attr.qos_flow_id)
+ bfa_cb_rport_qos_scn_flowid(rp->rport_drv,
+ qos_scn->old_qos_attr,
+ qos_scn->new_qos_attr);
+ if (qos_scn->old_qos_attr.qos_priority !=
+ qos_scn->new_qos_attr.qos_priority)
+ bfa_cb_rport_qos_scn_prio(rp->rport_drv,
+ qos_scn->old_qos_attr,
+ qos_scn->new_qos_attr);
+ break;
+
+ default:
+ bfa_stats(rp, sm_on_unexp);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Firmware rport is being deleted - awaiting f/w response.
+ */
+static void
+bfa_rport_sm_fwdelete(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_FWRSP:
+ bfa_stats(rp, sm_fwd_rsp);
+ bfa_sm_set_state(rp, bfa_rport_sm_offline);
+ bfa_rport_offline_cb(rp);
+ break;
+
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_fwd_del);
+ bfa_sm_set_state(rp, bfa_rport_sm_deleting);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_fwd_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+ bfa_rport_offline_cb(rp);
+ break;
+
+ default:
+ bfa_stats(rp, sm_fwd_unexp);
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_rport_sm_fwdelete_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_QRESUME:
+ bfa_sm_set_state(rp, bfa_rport_sm_fwdelete);
+ bfa_rport_send_fwdelete(rp);
+ break;
+
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_fwd_del);
+ bfa_sm_set_state(rp, bfa_rport_sm_deleting_qfull);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_fwd_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+ bfa_reqq_wcancel(&rp->reqq_wait);
+ bfa_rport_offline_cb(rp);
+ break;
+
+ default:
+ bfa_stats(rp, sm_fwd_unexp);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Offline state.
+ */
+static void
+bfa_rport_sm_offline(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_off_del);
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+ bfa_rport_free(rp);
+ break;
+
+ case BFA_RPORT_SM_ONLINE:
+ bfa_stats(rp, sm_off_on);
+ if (bfa_rport_send_fwcreate(rp))
+ bfa_sm_set_state(rp, bfa_rport_sm_fwcreate);
+ else
+ bfa_sm_set_state(rp, bfa_rport_sm_fwcreate_qfull);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_off_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+ break;
+
+ default:
+ bfa_stats(rp, sm_off_unexp);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport is deleted, waiting for firmware response to delete.
+ */
+static void
+bfa_rport_sm_deleting(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_FWRSP:
+ bfa_stats(rp, sm_del_fwrsp);
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+ bfa_rport_free(rp);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_del_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+ bfa_rport_free(rp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_rport_sm_deleting_qfull(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_QRESUME:
+ bfa_stats(rp, sm_del_fwrsp);
+ bfa_sm_set_state(rp, bfa_rport_sm_deleting);
+ bfa_rport_send_fwdelete(rp);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_del_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+ bfa_reqq_wcancel(&rp->reqq_wait);
+ bfa_rport_free(rp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Waiting for rport create response from firmware. A delete is pending.
+ */
+static void
+bfa_rport_sm_delete_pending(struct bfa_rport_s *rp,
+ enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_FWRSP:
+ bfa_stats(rp, sm_delp_fwrsp);
+ if (bfa_rport_send_fwdelete(rp))
+ bfa_sm_set_state(rp, bfa_rport_sm_deleting);
+ else
+ bfa_sm_set_state(rp, bfa_rport_sm_deleting_qfull);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_delp_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+ bfa_rport_free(rp);
+ break;
+
+ default:
+ bfa_stats(rp, sm_delp_unexp);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Waiting for rport create response from firmware. Rport offline is pending.
+ */
+static void
+bfa_rport_sm_offline_pending(struct bfa_rport_s *rp,
+ enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_FWRSP:
+ bfa_stats(rp, sm_offp_fwrsp);
+ if (bfa_rport_send_fwdelete(rp))
+ bfa_sm_set_state(rp, bfa_rport_sm_fwdelete);
+ else
+ bfa_sm_set_state(rp, bfa_rport_sm_fwdelete_qfull);
+ break;
+
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_offp_del);
+ bfa_sm_set_state(rp, bfa_rport_sm_delete_pending);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ bfa_stats(rp, sm_offp_hwf);
+ bfa_sm_set_state(rp, bfa_rport_sm_iocdisable);
+ break;
+
+ default:
+ bfa_stats(rp, sm_offp_unexp);
+ bfa_assert(0);
+ }
+}
+
+/**
+ * IOC h/w failed.
+ */
+static void
+bfa_rport_sm_iocdisable(struct bfa_rport_s *rp, enum bfa_rport_event event)
+{
+ bfa_trc(rp->bfa, rp->rport_tag);
+ bfa_trc(rp->bfa, event);
+
+ switch (event) {
+ case BFA_RPORT_SM_OFFLINE:
+ bfa_stats(rp, sm_iocd_off);
+ bfa_rport_offline_cb(rp);
+ break;
+
+ case BFA_RPORT_SM_DELETE:
+ bfa_stats(rp, sm_iocd_del);
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+ bfa_rport_free(rp);
+ break;
+
+ case BFA_RPORT_SM_ONLINE:
+ bfa_stats(rp, sm_iocd_on);
+ if (bfa_rport_send_fwcreate(rp))
+ bfa_sm_set_state(rp, bfa_rport_sm_fwcreate);
+ else
+ bfa_sm_set_state(rp, bfa_rport_sm_fwcreate_qfull);
+ break;
+
+ case BFA_RPORT_SM_HWFAIL:
+ break;
+
+ default:
+ bfa_stats(rp, sm_iocd_unexp);
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * bfa_rport_private BFA rport private functions
+ */
+
+static void
+__bfa_cb_rport_online(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_rport_s *rp = cbarg;
+
+ if (complete)
+ bfa_cb_rport_online(rp->rport_drv);
+}
+
+static void
+__bfa_cb_rport_offline(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_rport_s *rp = cbarg;
+
+ if (complete)
+ bfa_cb_rport_offline(rp->rport_drv);
+}
+
+static void
+bfa_rport_qresume(void *cbarg)
+{
+ struct bfa_rport_s *rp = cbarg;
+
+ bfa_sm_send_event(rp, BFA_RPORT_SM_QRESUME);
+}
+
+static void
+bfa_rport_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+ u32 *dm_len)
+{
+ if (cfg->fwcfg.num_rports < BFA_RPORT_MIN)
+ cfg->fwcfg.num_rports = BFA_RPORT_MIN;
+
+ *km_len += cfg->fwcfg.num_rports * sizeof(struct bfa_rport_s);
+}
+
+static void
+bfa_rport_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+ struct bfa_rport_mod_s *mod = BFA_RPORT_MOD(bfa);
+ struct bfa_rport_s *rp;
+ u16 i;
+
+ INIT_LIST_HEAD(&mod->rp_free_q);
+ INIT_LIST_HEAD(&mod->rp_active_q);
+
+ rp = (struct bfa_rport_s *) bfa_meminfo_kva(meminfo);
+ mod->rps_list = rp;
+ mod->num_rports = cfg->fwcfg.num_rports;
+
+ bfa_assert(mod->num_rports
+ && !(mod->num_rports & (mod->num_rports - 1)));
+
+ for (i = 0; i < mod->num_rports; i++, rp++) {
+ bfa_os_memset(rp, 0, sizeof(struct bfa_rport_s));
+ rp->bfa = bfa;
+ rp->rport_tag = i;
+ bfa_sm_set_state(rp, bfa_rport_sm_uninit);
+
+ /**
+ * - is unused
+ */
+ if (i)
+ list_add_tail(&rp->qe, &mod->rp_free_q);
+
+ bfa_reqq_winit(&rp->reqq_wait, bfa_rport_qresume, rp);
+ }
+
+ /**
+ * consume memory
+ */
+ bfa_meminfo_kva(meminfo) = (u8 *) rp;
+}
+
+static void
+bfa_rport_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_rport_detach(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_rport_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_rport_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_rport_iocdisable(struct bfa_s *bfa)
+{
+ struct bfa_rport_mod_s *mod = BFA_RPORT_MOD(bfa);
+ struct bfa_rport_s *rport;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &mod->rp_active_q) {
+ rport = (struct bfa_rport_s *) qe;
+ bfa_sm_send_event(rport, BFA_RPORT_SM_HWFAIL);
+ }
+}
+
+static struct bfa_rport_s *
+bfa_rport_alloc(struct bfa_rport_mod_s *mod)
+{
+ struct bfa_rport_s *rport;
+
+ bfa_q_deq(&mod->rp_free_q, &rport);
+ if (rport)
+ list_add_tail(&rport->qe, &mod->rp_active_q);
+
+ return (rport);
+}
+
+static void
+bfa_rport_free(struct bfa_rport_s *rport)
+{
+ struct bfa_rport_mod_s *mod = BFA_RPORT_MOD(rport->bfa);
+
+ bfa_assert(bfa_q_is_on_q(&mod->rp_active_q, rport));
+ list_del(&rport->qe);
+ list_add_tail(&rport->qe, &mod->rp_free_q);
+}
+
+static bfa_boolean_t
+bfa_rport_send_fwcreate(struct bfa_rport_s *rp)
+{
+ struct bfi_rport_create_req_s *m;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(rp->bfa, BFA_REQQ_RPORT);
+ if (!m) {
+ bfa_reqq_wait(rp->bfa, BFA_REQQ_RPORT, &rp->reqq_wait);
+ return BFA_FALSE;
+ }
+
+ bfi_h2i_set(m->mh, BFI_MC_RPORT, BFI_RPORT_H2I_CREATE_REQ,
+ bfa_lpuid(rp->bfa));
+ m->bfa_handle = rp->rport_tag;
+ m->max_frmsz = bfa_os_htons(rp->rport_info.max_frmsz);
+ m->pid = rp->rport_info.pid;
+ m->lp_tag = rp->rport_info.lp_tag;
+ m->local_pid = rp->rport_info.local_pid;
+ m->fc_class = rp->rport_info.fc_class;
+ m->vf_en = rp->rport_info.vf_en;
+ m->vf_id = rp->rport_info.vf_id;
+ m->cisc = rp->rport_info.cisc;
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(rp->bfa, BFA_REQQ_RPORT);
+ return BFA_TRUE;
+}
+
+static bfa_boolean_t
+bfa_rport_send_fwdelete(struct bfa_rport_s *rp)
+{
+ struct bfi_rport_delete_req_s *m;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(rp->bfa, BFA_REQQ_RPORT);
+ if (!m) {
+ bfa_reqq_wait(rp->bfa, BFA_REQQ_RPORT, &rp->reqq_wait);
+ return BFA_FALSE;
+ }
+
+ bfi_h2i_set(m->mh, BFI_MC_RPORT, BFI_RPORT_H2I_DELETE_REQ,
+ bfa_lpuid(rp->bfa));
+ m->fw_handle = rp->fw_handle;
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(rp->bfa, BFA_REQQ_RPORT);
+ return BFA_TRUE;
+}
+
+static bfa_boolean_t
+bfa_rport_send_fwspeed(struct bfa_rport_s *rp)
+{
+ struct bfa_rport_speed_req_s *m;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(rp->bfa, BFA_REQQ_RPORT);
+ if (!m) {
+ bfa_trc(rp->bfa, rp->rport_info.speed);
+ return BFA_FALSE;
+ }
+
+ bfi_h2i_set(m->mh, BFI_MC_RPORT, BFI_RPORT_H2I_SET_SPEED_REQ,
+ bfa_lpuid(rp->bfa));
+ m->fw_handle = rp->fw_handle;
+ m->speed = (u8)rp->rport_info.speed;
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(rp->bfa, BFA_REQQ_RPORT);
+ return BFA_TRUE;
+}
+
+
+
+/**
+ * bfa_rport_public
+ */
+
+/**
+ * Rport interrupt processing.
+ */
+void
+bfa_rport_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+ union bfi_rport_i2h_msg_u msg;
+ struct bfa_rport_s *rp;
+
+ bfa_trc(bfa, m->mhdr.msg_id);
+
+ msg.msg = m;
+
+ switch (m->mhdr.msg_id) {
+ case BFI_RPORT_I2H_CREATE_RSP:
+ rp = BFA_RPORT_FROM_TAG(bfa, msg.create_rsp->bfa_handle);
+ rp->fw_handle = msg.create_rsp->fw_handle;
+ rp->qos_attr = msg.create_rsp->qos_attr;
+ bfa_assert(msg.create_rsp->status == BFA_STATUS_OK);
+ bfa_sm_send_event(rp, BFA_RPORT_SM_FWRSP);
+ break;
+
+ case BFI_RPORT_I2H_DELETE_RSP:
+ rp = BFA_RPORT_FROM_TAG(bfa, msg.delete_rsp->bfa_handle);
+ bfa_assert(msg.delete_rsp->status == BFA_STATUS_OK);
+ bfa_sm_send_event(rp, BFA_RPORT_SM_FWRSP);
+ break;
+
+ case BFI_RPORT_I2H_QOS_SCN:
+ rp = BFA_RPORT_FROM_TAG(bfa, msg.qos_scn_evt->bfa_handle);
+ rp->event_arg.fw_msg = msg.qos_scn_evt;
+ bfa_sm_send_event(rp, BFA_RPORT_SM_QOS_SCN);
+ break;
+
+ default:
+ bfa_trc(bfa, m->mhdr.msg_id);
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * bfa_rport_api
+ */
+
+struct bfa_rport_s *
+bfa_rport_create(struct bfa_s *bfa, void *rport_drv)
+{
+ struct bfa_rport_s *rp;
+
+ rp = bfa_rport_alloc(BFA_RPORT_MOD(bfa));
+
+ if (rp == NULL)
+ return (NULL);
+
+ rp->bfa = bfa;
+ rp->rport_drv = rport_drv;
+ bfa_rport_clear_stats(rp);
+
+ bfa_assert(bfa_sm_cmp_state(rp, bfa_rport_sm_uninit));
+ bfa_sm_send_event(rp, BFA_RPORT_SM_CREATE);
+
+ return (rp);
+}
+
+void
+bfa_rport_delete(struct bfa_rport_s *rport)
+{
+ bfa_sm_send_event(rport, BFA_RPORT_SM_DELETE);
+}
+
+void
+bfa_rport_online(struct bfa_rport_s *rport, struct bfa_rport_info_s *rport_info)
+{
+ bfa_assert(rport_info->max_frmsz != 0);
+
+ /**
+ * Some JBODs are seen to be not setting PDU size correctly in PLOGI
+ * responses. Default to minimum size.
+ */
+ if (rport_info->max_frmsz == 0) {
+ bfa_trc(rport->bfa, rport->rport_tag);
+ rport_info->max_frmsz = FC_MIN_PDUSZ;
+ }
+
+ bfa_os_assign(rport->rport_info, *rport_info);
+ bfa_sm_send_event(rport, BFA_RPORT_SM_ONLINE);
+}
+
+void
+bfa_rport_offline(struct bfa_rport_s *rport)
+{
+ bfa_sm_send_event(rport, BFA_RPORT_SM_OFFLINE);
+}
+
+void
+bfa_rport_speed(struct bfa_rport_s *rport, enum bfa_pport_speed speed)
+{
+ bfa_assert(speed != 0);
+ bfa_assert(speed != BFA_PPORT_SPEED_AUTO);
+
+ rport->rport_info.speed = speed;
+ bfa_sm_send_event(rport, BFA_RPORT_SM_SET_SPEED);
+}
+
+void
+bfa_rport_get_stats(struct bfa_rport_s *rport,
+ struct bfa_rport_hal_stats_s *stats)
+{
+ *stats = rport->stats;
+}
+
+void
+bfa_rport_get_qos_attr(struct bfa_rport_s *rport,
+ struct bfa_rport_qos_attr_s *qos_attr)
+{
+ qos_attr->qos_priority = bfa_os_ntohl(rport->qos_attr.qos_priority);
+ qos_attr->qos_flow_id = bfa_os_ntohl(rport->qos_attr.qos_flow_id);
+
+}
+
+void
+bfa_rport_clear_stats(struct bfa_rport_s *rport)
+{
+ bfa_os_memset(&rport->stats, 0, sizeof(rport->stats));
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_RPORT_PRIV_H__
+#define __BFA_RPORT_PRIV_H__
+
+#include <bfa_svc.h>
+
+#define BFA_RPORT_MIN 4
+
+struct bfa_rport_mod_s {
+ struct bfa_rport_s *rps_list; /* list of rports */
+ struct list_head rp_free_q; /* free bfa_rports */
+ struct list_head rp_active_q; /* free bfa_rports */
+ u16 num_rports; /* number of rports */
+};
+
+#define BFA_RPORT_MOD(__bfa) (&(__bfa)->modules.rport_mod)
+
+/**
+ * Convert rport tag to RPORT
+ */
+#define BFA_RPORT_FROM_TAG(__bfa, _tag) \
+ (BFA_RPORT_MOD(__bfa)->rps_list + \
+ ((_tag) & (BFA_RPORT_MOD(__bfa)->num_rports - 1)))
+
+/*
+ * external functions
+ */
+void bfa_rport_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+#endif /* __BFA_RPORT_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+
+BFA_TRC_FILE(HAL, SGPG);
+BFA_MODULE(sgpg);
+
+/**
+ * bfa_sgpg_mod BFA SGPG Mode module
+ */
+
+/**
+ * Compute and return memory needed by FCP(im) module.
+ */
+static void
+bfa_sgpg_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *km_len,
+ u32 *dm_len)
+{
+ if (cfg->drvcfg.num_sgpgs < BFA_SGPG_MIN)
+ cfg->drvcfg.num_sgpgs = BFA_SGPG_MIN;
+
+ *km_len += (cfg->drvcfg.num_sgpgs + 1) * sizeof(struct bfa_sgpg_s);
+ *dm_len += (cfg->drvcfg.num_sgpgs + 1) * sizeof(struct bfi_sgpg_s);
+}
+
+
+static void
+bfa_sgpg_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *minfo, struct bfa_pcidev_s *pcidev)
+{
+ struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+ int i;
+ struct bfa_sgpg_s *hsgpg;
+ struct bfi_sgpg_s *sgpg;
+ u64 align_len;
+
+ union {
+ u64 pa;
+ union bfi_addr_u addr;
+ } sgpg_pa;
+
+ INIT_LIST_HEAD(&mod->sgpg_q);
+ INIT_LIST_HEAD(&mod->sgpg_wait_q);
+
+ bfa_trc(bfa, cfg->drvcfg.num_sgpgs);
+
+ mod->num_sgpgs = cfg->drvcfg.num_sgpgs;
+ mod->sgpg_arr_pa = bfa_meminfo_dma_phys(minfo);
+ align_len = (BFA_SGPG_ROUNDUP(mod->sgpg_arr_pa) - mod->sgpg_arr_pa);
+ mod->sgpg_arr_pa += align_len;
+ mod->hsgpg_arr = (struct bfa_sgpg_s *) (bfa_meminfo_kva(minfo) +
+ align_len);
+ mod->sgpg_arr = (struct bfi_sgpg_s *) (bfa_meminfo_dma_virt(minfo) +
+ align_len);
+
+ hsgpg = mod->hsgpg_arr;
+ sgpg = mod->sgpg_arr;
+ sgpg_pa.pa = mod->sgpg_arr_pa;
+ mod->free_sgpgs = mod->num_sgpgs;
+
+ bfa_assert(!(sgpg_pa.pa & (sizeof(struct bfi_sgpg_s) - 1)));
+
+ for (i = 0; i < mod->num_sgpgs; i++) {
+ bfa_os_memset(hsgpg, 0, sizeof(*hsgpg));
+ bfa_os_memset(sgpg, 0, sizeof(*sgpg));
+
+ hsgpg->sgpg = sgpg;
+ hsgpg->sgpg_pa = sgpg_pa.addr;
+ list_add_tail(&hsgpg->qe, &mod->sgpg_q);
+
+ hsgpg++;
+ sgpg++;
+ sgpg_pa.pa += sizeof(struct bfi_sgpg_s);
+ }
+
+ bfa_meminfo_kva(minfo) = (u8 *) hsgpg;
+ bfa_meminfo_dma_virt(minfo) = (u8 *) sgpg;
+ bfa_meminfo_dma_phys(minfo) = sgpg_pa.pa;
+}
+
+static void
+bfa_sgpg_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_sgpg_detach(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_sgpg_start(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_sgpg_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_sgpg_iocdisable(struct bfa_s *bfa)
+{
+}
+
+
+
+/**
+ * bfa_sgpg_public BFA SGPG public functions
+ */
+
+bfa_status_t
+bfa_sgpg_malloc(struct bfa_s *bfa, struct list_head *sgpg_q, int nsgpgs)
+{
+ struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+ struct bfa_sgpg_s *hsgpg;
+ int i;
+
+ bfa_trc_fp(bfa, nsgpgs);
+
+ if (mod->free_sgpgs < nsgpgs)
+ return BFA_STATUS_ENOMEM;
+
+ for (i = 0; i < nsgpgs; i++) {
+ bfa_q_deq(&mod->sgpg_q, &hsgpg);
+ bfa_assert(hsgpg);
+ list_add_tail(&hsgpg->qe, sgpg_q);
+ }
+
+ mod->free_sgpgs -= nsgpgs;
+ return BFA_STATUS_OK;
+}
+
+void
+bfa_sgpg_mfree(struct bfa_s *bfa, struct list_head *sgpg_q, int nsgpg)
+{
+ struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+ struct bfa_sgpg_wqe_s *wqe;
+
+ bfa_trc_fp(bfa, nsgpg);
+
+ mod->free_sgpgs += nsgpg;
+ bfa_assert(mod->free_sgpgs <= mod->num_sgpgs);
+
+ list_splice_tail_init(sgpg_q, &mod->sgpg_q);
+
+ if (list_empty(&mod->sgpg_wait_q))
+ return;
+
+ /**
+ * satisfy as many waiting requests as possible
+ */
+ do {
+ wqe = bfa_q_first(&mod->sgpg_wait_q);
+ if (mod->free_sgpgs < wqe->nsgpg)
+ nsgpg = mod->free_sgpgs;
+ else
+ nsgpg = wqe->nsgpg;
+ bfa_sgpg_malloc(bfa, &wqe->sgpg_q, nsgpg);
+ wqe->nsgpg -= nsgpg;
+ if (wqe->nsgpg == 0) {
+ list_del(&wqe->qe);
+ wqe->cbfn(wqe->cbarg);
+ }
+ } while (mod->free_sgpgs && !list_empty(&mod->sgpg_wait_q));
+}
+
+void
+bfa_sgpg_wait(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe, int nsgpg)
+{
+ struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+
+ bfa_assert(nsgpg > 0);
+ bfa_assert(nsgpg > mod->free_sgpgs);
+
+ wqe->nsgpg_total = wqe->nsgpg = nsgpg;
+
+ /**
+ * allocate any left to this one first
+ */
+ if (mod->free_sgpgs) {
+ /**
+ * no one else is waiting for SGPG
+ */
+ bfa_assert(list_empty(&mod->sgpg_wait_q));
+ list_splice_tail_init(&mod->sgpg_q, &wqe->sgpg_q);
+ wqe->nsgpg -= mod->free_sgpgs;
+ mod->free_sgpgs = 0;
+ }
+
+ list_add_tail(&wqe->qe, &mod->sgpg_wait_q);
+}
+
+void
+bfa_sgpg_wcancel(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe)
+{
+ struct bfa_sgpg_mod_s *mod = BFA_SGPG_MOD(bfa);
+
+ bfa_assert(bfa_q_is_on_q(&mod->sgpg_wait_q, wqe));
+ list_del(&wqe->qe);
+
+ if (wqe->nsgpg_total != wqe->nsgpg)
+ bfa_sgpg_mfree(bfa, &wqe->sgpg_q,
+ wqe->nsgpg_total - wqe->nsgpg);
+}
+
+void
+bfa_sgpg_winit(struct bfa_sgpg_wqe_s *wqe, void (*cbfn) (void *cbarg),
+ void *cbarg)
+{
+ INIT_LIST_HEAD(&wqe->sgpg_q);
+ wqe->cbfn = cbfn;
+ wqe->cbarg = cbarg;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * hal_sgpg.h BFA SG page module
+ */
+
+#ifndef __BFA_SGPG_PRIV_H__
+#define __BFA_SGPG_PRIV_H__
+
+#include <cs/bfa_q.h>
+
+#define BFA_SGPG_MIN (16)
+
+/**
+ * Alignment macro for SG page allocation
+ */
+#define BFA_SGPG_ROUNDUP(_l) (((_l) + (sizeof(struct bfi_sgpg_s) - 1)) \
+ & ~(sizeof(struct bfi_sgpg_s) - 1))
+
+struct bfa_sgpg_wqe_s {
+ struct list_head qe; /* queue sg page element */
+ int nsgpg; /* pages to be allocated */
+ int nsgpg_total; /* total pages required */
+ void (*cbfn) (void *cbarg);
+ /* callback function */
+ void *cbarg; /* callback arg */
+ struct list_head sgpg_q; /* queue of alloced sgpgs */
+};
+
+struct bfa_sgpg_s {
+ struct list_head qe; /* queue sg page element */
+ struct bfi_sgpg_s *sgpg; /* va of SG page */
+ union bfi_addr_u sgpg_pa;/* pa of SG page */
+};
+
+/**
+ * Given number of SG elements, BFA_SGPG_NPAGE() returns the number of
+ * SG pages required.
+ */
+#define BFA_SGPG_NPAGE(_nsges) (((_nsges) / BFI_SGPG_DATA_SGES) + 1)
+
+struct bfa_sgpg_mod_s {
+ struct bfa_s *bfa;
+ int num_sgpgs; /* number of SG pages */
+ int free_sgpgs; /* number of free SG pages */
+ struct bfa_sgpg_s *hsgpg_arr; /* BFA SG page array */
+ struct bfi_sgpg_s *sgpg_arr; /* actual SG page array */
+ u64 sgpg_arr_pa; /* SG page array DMA addr */
+ struct list_head sgpg_q; /* queue of free SG pages */
+ struct list_head sgpg_wait_q; /* wait queue for SG pages */
+};
+#define BFA_SGPG_MOD(__bfa) (&(__bfa)->modules.sgpg_mod)
+
+bfa_status_t bfa_sgpg_malloc(struct bfa_s *bfa, struct list_head *sgpg_q,
+ int nsgpgs);
+void bfa_sgpg_mfree(struct bfa_s *bfa, struct list_head *sgpg_q,
+ int nsgpgs);
+void bfa_sgpg_winit(struct bfa_sgpg_wqe_s *wqe,
+ void (*cbfn) (void *cbarg), void *cbarg);
+void bfa_sgpg_wait(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe,
+ int nsgpgs);
+void bfa_sgpg_wcancel(struct bfa_s *bfa, struct bfa_sgpg_wqe_s *wqe);
+
+#endif /* __BFA_SGPG_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfasm.c BFA State machine utility functions
+ */
+
+#include <cs/bfa_sm.h>
+
+/**
+ * cs_sm_api
+ */
+
+int
+bfa_sm_to_state(struct bfa_sm_table_s *smt, bfa_sm_t sm)
+{
+ int i = 0;
+
+ while (smt[i].sm && smt[i].sm != sm)
+ i++;
+ return smt[i].state;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa_timer.h>
+#include <cs/bfa_debug.h>
+
+void
+bfa_timer_init(struct bfa_timer_mod_s *mod)
+{
+ INIT_LIST_HEAD(&mod->timer_q);
+}
+
+void
+bfa_timer_beat(struct bfa_timer_mod_s *mod)
+{
+ struct list_head *qh = &mod->timer_q;
+ struct list_head *qe, *qe_next;
+ struct bfa_timer_s *elem;
+ struct list_head timedout_q;
+
+ INIT_LIST_HEAD(&timedout_q);
+
+ qe = bfa_q_next(qh);
+
+ while (qe != qh) {
+ qe_next = bfa_q_next(qe);
+
+ elem = (struct bfa_timer_s *) qe;
+ if (elem->timeout <= BFA_TIMER_FREQ) {
+ elem->timeout = 0;
+ list_del(&elem->qe);
+ list_add_tail(&elem->qe, &timedout_q);
+ } else {
+ elem->timeout -= BFA_TIMER_FREQ;
+ }
+
+ qe = qe_next; /* go to next elem */
+ }
+
+ /*
+ * Pop all the timeout entries
+ */
+ while (!list_empty(&timedout_q)) {
+ bfa_q_deq(&timedout_q, &elem);
+ elem->timercb(elem->arg);
+ }
+}
+
+/**
+ * Should be called with lock protection
+ */
+void
+bfa_timer_begin(struct bfa_timer_mod_s *mod, struct bfa_timer_s *timer,
+ void (*timercb) (void *), void *arg, unsigned int timeout)
+{
+
+ bfa_assert(timercb != NULL);
+ bfa_assert(!bfa_q_is_on_q(&mod->timer_q, timer));
+
+ timer->timeout = timeout;
+ timer->timercb = timercb;
+ timer->arg = arg;
+
+ list_add_tail(&timer->qe, &mod->timer_q);
+}
+
+/**
+ * Should be called with lock protection
+ */
+void
+bfa_timer_stop(struct bfa_timer_s *timer)
+{
+ bfa_assert(!list_empty(&timer->qe));
+
+ list_del(&timer->qe);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * hal_trcmod.h BFA trace modules
+ */
+
+#ifndef __BFA_TRCMOD_PRIV_H__
+#define __BFA_TRCMOD_PRIV_H__
+
+#include <cs/bfa_trc.h>
+
+/*
+ * !!! Only append to the enums defined here to avoid any versioning
+ * !!! needed between trace utility and driver version
+ */
+enum {
+ BFA_TRC_HAL_IOC = 1,
+ BFA_TRC_HAL_INTR = 2,
+ BFA_TRC_HAL_FCXP = 3,
+ BFA_TRC_HAL_UF = 4,
+ BFA_TRC_HAL_DIAG = 5,
+ BFA_TRC_HAL_RPORT = 6,
+ BFA_TRC_HAL_FCPIM = 7,
+ BFA_TRC_HAL_IOIM = 8,
+ BFA_TRC_HAL_TSKIM = 9,
+ BFA_TRC_HAL_ITNIM = 10,
+ BFA_TRC_HAL_PPORT = 11,
+ BFA_TRC_HAL_SGPG = 12,
+ BFA_TRC_HAL_FLASH = 13,
+ BFA_TRC_HAL_DEBUG = 14,
+ BFA_TRC_HAL_WWN = 15,
+ BFA_TRC_HAL_FLASH_RAW = 16,
+ BFA_TRC_HAL_SBOOT = 17,
+ BFA_TRC_HAL_SBOOT_IO = 18,
+ BFA_TRC_HAL_SBOOT_INTR = 19,
+ BFA_TRC_HAL_SBTEST = 20,
+ BFA_TRC_HAL_IPFC = 21,
+ BFA_TRC_HAL_IOCFC = 22,
+ BFA_TRC_HAL_FCPTM = 23,
+ BFA_TRC_HAL_IOTM = 24,
+ BFA_TRC_HAL_TSKTM = 25,
+ BFA_TRC_HAL_TIN = 26,
+ BFA_TRC_HAL_LPS = 27,
+ BFA_TRC_HAL_FCDIAG = 28,
+ BFA_TRC_HAL_PBIND = 29,
+ BFA_TRC_HAL_IOCFC_CT = 30,
+ BFA_TRC_HAL_IOCFC_CB = 31,
+ BFA_TRC_HAL_IOCFC_Q = 32,
+};
+
+#endif /* __BFA_TRCMOD_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_cb_ioim_macros.h>
+
+BFA_TRC_FILE(HAL, TSKIM);
+
+/**
+ * task management completion handling
+ */
+#define bfa_tskim_qcomp(__tskim, __cbfn) do { \
+ bfa_cb_queue((__tskim)->bfa, &(__tskim)->hcb_qe, __cbfn, (__tskim)); \
+ bfa_tskim_notify_comp(__tskim); \
+} while (0)
+
+#define bfa_tskim_notify_comp(__tskim) do { \
+ if ((__tskim)->notify) \
+ bfa_itnim_tskdone((__tskim)->itnim); \
+} while (0)
+
+/*
+ * forward declarations
+ */
+static void __bfa_cb_tskim_done(void *cbarg, bfa_boolean_t complete);
+static void __bfa_cb_tskim_failed(void *cbarg, bfa_boolean_t complete);
+static bfa_boolean_t bfa_tskim_match_scope(struct bfa_tskim_s *tskim,
+ lun_t lun);
+static void bfa_tskim_gather_ios(struct bfa_tskim_s *tskim);
+static void bfa_tskim_cleanp_comp(void *tskim_cbarg);
+static void bfa_tskim_cleanup_ios(struct bfa_tskim_s *tskim);
+static bfa_boolean_t bfa_tskim_send(struct bfa_tskim_s *tskim);
+static bfa_boolean_t bfa_tskim_send_abort(struct bfa_tskim_s *tskim);
+static void bfa_tskim_iocdisable_ios(struct bfa_tskim_s *tskim);
+
+/**
+ * bfa_tskim_sm
+ */
+
+enum bfa_tskim_event {
+ BFA_TSKIM_SM_START = 1, /* TM command start */
+ BFA_TSKIM_SM_DONE = 2, /* TM completion */
+ BFA_TSKIM_SM_QRESUME = 3, /* resume after qfull */
+ BFA_TSKIM_SM_HWFAIL = 5, /* IOC h/w failure event */
+ BFA_TSKIM_SM_HCB = 6, /* BFA callback completion */
+ BFA_TSKIM_SM_IOS_DONE = 7, /* IO and sub TM completions */
+ BFA_TSKIM_SM_CLEANUP = 8, /* TM cleanup on ITN offline */
+ BFA_TSKIM_SM_CLEANUP_DONE = 9, /* TM abort completion */
+};
+
+static void bfa_tskim_sm_uninit(struct bfa_tskim_s *tskim,
+ enum bfa_tskim_event event);
+static void bfa_tskim_sm_active(struct bfa_tskim_s *tskim,
+ enum bfa_tskim_event event);
+static void bfa_tskim_sm_cleanup(struct bfa_tskim_s *tskim,
+ enum bfa_tskim_event event);
+static void bfa_tskim_sm_iocleanup(struct bfa_tskim_s *tskim,
+ enum bfa_tskim_event event);
+static void bfa_tskim_sm_qfull(struct bfa_tskim_s *tskim,
+ enum bfa_tskim_event event);
+static void bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
+ enum bfa_tskim_event event);
+static void bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim,
+ enum bfa_tskim_event event);
+
+/**
+ * Task management command beginning state.
+ */
+static void
+bfa_tskim_sm_uninit(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+ bfa_trc(tskim->bfa, event);
+
+ switch (event) {
+ case BFA_TSKIM_SM_START:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_active);
+ bfa_tskim_gather_ios(tskim);
+
+ /**
+ * If device is offline, do not send TM on wire. Just cleanup
+ * any pending IO requests and complete TM request.
+ */
+ if (!bfa_itnim_is_online(tskim->itnim)) {
+ bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
+ tskim->tsk_status = BFI_TSKIM_STS_OK;
+ bfa_tskim_cleanup_ios(tskim);
+ return;
+ }
+
+ if (!bfa_tskim_send(tskim)) {
+ bfa_sm_set_state(tskim, bfa_tskim_sm_qfull);
+ bfa_reqq_wait(tskim->bfa, tskim->itnim->reqq,
+ &tskim->reqq_wait);
+ }
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * brief
+ * TM command is active, awaiting completion from firmware to
+ * cleanup IO requests in TM scope.
+ */
+static void
+bfa_tskim_sm_active(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+ bfa_trc(tskim->bfa, event);
+
+ switch (event) {
+ case BFA_TSKIM_SM_DONE:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
+ bfa_tskim_cleanup_ios(tskim);
+ break;
+
+ case BFA_TSKIM_SM_CLEANUP:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_cleanup);
+ if (!bfa_tskim_send_abort(tskim)) {
+ bfa_sm_set_state(tskim, bfa_tskim_sm_cleanup_qfull);
+ bfa_reqq_wait(tskim->bfa, tskim->itnim->reqq,
+ &tskim->reqq_wait);
+ }
+ break;
+
+ case BFA_TSKIM_SM_HWFAIL:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+ bfa_tskim_iocdisable_ios(tskim);
+ bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * An active TM is being cleaned up since ITN is offline. Awaiting cleanup
+ * completion event from firmware.
+ */
+static void
+bfa_tskim_sm_cleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+ bfa_trc(tskim->bfa, event);
+
+ switch (event) {
+ case BFA_TSKIM_SM_DONE:
+ /**
+ * Ignore and wait for ABORT completion from firmware.
+ */
+ break;
+
+ case BFA_TSKIM_SM_CLEANUP_DONE:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
+ bfa_tskim_cleanup_ios(tskim);
+ break;
+
+ case BFA_TSKIM_SM_HWFAIL:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+ bfa_tskim_iocdisable_ios(tskim);
+ bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_tskim_sm_iocleanup(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+ bfa_trc(tskim->bfa, event);
+
+ switch (event) {
+ case BFA_TSKIM_SM_IOS_DONE:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+ bfa_tskim_qcomp(tskim, __bfa_cb_tskim_done);
+ break;
+
+ case BFA_TSKIM_SM_CLEANUP:
+ /**
+ * Ignore, TM command completed on wire.
+ * Notify TM conmpletion on IO cleanup completion.
+ */
+ break;
+
+ case BFA_TSKIM_SM_HWFAIL:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+ bfa_tskim_iocdisable_ios(tskim);
+ bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Task management command is waiting for room in request CQ
+ */
+static void
+bfa_tskim_sm_qfull(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+ bfa_trc(tskim->bfa, event);
+
+ switch (event) {
+ case BFA_TSKIM_SM_QRESUME:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_active);
+ bfa_tskim_send(tskim);
+ break;
+
+ case BFA_TSKIM_SM_CLEANUP:
+ /**
+ * No need to send TM on wire since ITN is offline.
+ */
+ bfa_sm_set_state(tskim, bfa_tskim_sm_iocleanup);
+ bfa_reqq_wcancel(&tskim->reqq_wait);
+ bfa_tskim_cleanup_ios(tskim);
+ break;
+
+ case BFA_TSKIM_SM_HWFAIL:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+ bfa_reqq_wcancel(&tskim->reqq_wait);
+ bfa_tskim_iocdisable_ios(tskim);
+ bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Task management command is active, awaiting for room in request CQ
+ * to send clean up request.
+ */
+static void
+bfa_tskim_sm_cleanup_qfull(struct bfa_tskim_s *tskim,
+ enum bfa_tskim_event event)
+{
+ bfa_trc(tskim->bfa, event);
+
+ switch (event) {
+ case BFA_TSKIM_SM_DONE:
+ bfa_reqq_wcancel(&tskim->reqq_wait);
+ /**
+ *
+ * Fall through !!!
+ */
+
+ case BFA_TSKIM_SM_QRESUME:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_cleanup);
+ bfa_tskim_send_abort(tskim);
+ break;
+
+ case BFA_TSKIM_SM_HWFAIL:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_hcb);
+ bfa_reqq_wcancel(&tskim->reqq_wait);
+ bfa_tskim_iocdisable_ios(tskim);
+ bfa_tskim_qcomp(tskim, __bfa_cb_tskim_failed);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * BFA callback is pending
+ */
+static void
+bfa_tskim_sm_hcb(struct bfa_tskim_s *tskim, enum bfa_tskim_event event)
+{
+ bfa_trc(tskim->bfa, event);
+
+ switch (event) {
+ case BFA_TSKIM_SM_HCB:
+ bfa_sm_set_state(tskim, bfa_tskim_sm_uninit);
+ bfa_tskim_free(tskim);
+ break;
+
+ case BFA_TSKIM_SM_CLEANUP:
+ bfa_tskim_notify_comp(tskim);
+ break;
+
+ case BFA_TSKIM_SM_HWFAIL:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * bfa_tskim_private
+ */
+
+static void
+__bfa_cb_tskim_done(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_tskim_s *tskim = cbarg;
+
+ if (!complete) {
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_HCB);
+ return;
+ }
+
+ bfa_stats(tskim->itnim, tm_success);
+ bfa_cb_tskim_done(tskim->bfa->bfad, tskim->dtsk, tskim->tsk_status);
+}
+
+static void
+__bfa_cb_tskim_failed(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_tskim_s *tskim = cbarg;
+
+ if (!complete) {
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_HCB);
+ return;
+ }
+
+ bfa_stats(tskim->itnim, tm_failures);
+ bfa_cb_tskim_done(tskim->bfa->bfad, tskim->dtsk,
+ BFI_TSKIM_STS_FAILED);
+}
+
+static bfa_boolean_t
+bfa_tskim_match_scope(struct bfa_tskim_s *tskim, lun_t lun)
+{
+ switch (tskim->tm_cmnd) {
+ case FCP_TM_TARGET_RESET:
+ return BFA_TRUE;
+
+ case FCP_TM_ABORT_TASK_SET:
+ case FCP_TM_CLEAR_TASK_SET:
+ case FCP_TM_LUN_RESET:
+ case FCP_TM_CLEAR_ACA:
+ return (tskim->lun == lun);
+
+ default:
+ bfa_assert(0);
+ }
+
+ return BFA_FALSE;
+}
+
+/**
+ * Gather affected IO requests and task management commands.
+ */
+static void
+bfa_tskim_gather_ios(struct bfa_tskim_s *tskim)
+{
+ struct bfa_itnim_s *itnim = tskim->itnim;
+ struct bfa_ioim_s *ioim;
+ struct list_head *qe, *qen;
+
+ INIT_LIST_HEAD(&tskim->io_q);
+
+ /**
+ * Gather any active IO requests first.
+ */
+ list_for_each_safe(qe, qen, &itnim->io_q) {
+ ioim = (struct bfa_ioim_s *) qe;
+ if (bfa_tskim_match_scope
+ (tskim, bfa_cb_ioim_get_lun(ioim->dio))) {
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe, &tskim->io_q);
+ }
+ }
+
+ /**
+ * Failback any pending IO requests immediately.
+ */
+ list_for_each_safe(qe, qen, &itnim->pending_q) {
+ ioim = (struct bfa_ioim_s *) qe;
+ if (bfa_tskim_match_scope
+ (tskim, bfa_cb_ioim_get_lun(ioim->dio))) {
+ list_del(&ioim->qe);
+ list_add_tail(&ioim->qe, &ioim->fcpim->ioim_comp_q);
+ bfa_ioim_tov(ioim);
+ }
+ }
+}
+
+/**
+ * IO cleanup completion
+ */
+static void
+bfa_tskim_cleanp_comp(void *tskim_cbarg)
+{
+ struct bfa_tskim_s *tskim = tskim_cbarg;
+
+ bfa_stats(tskim->itnim, tm_io_comps);
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_IOS_DONE);
+}
+
+/**
+ * Gather affected IO requests and task management commands.
+ */
+static void
+bfa_tskim_cleanup_ios(struct bfa_tskim_s *tskim)
+{
+ struct bfa_ioim_s *ioim;
+ struct list_head *qe, *qen;
+
+ bfa_wc_init(&tskim->wc, bfa_tskim_cleanp_comp, tskim);
+
+ list_for_each_safe(qe, qen, &tskim->io_q) {
+ ioim = (struct bfa_ioim_s *) qe;
+ bfa_wc_up(&tskim->wc);
+ bfa_ioim_cleanup_tm(ioim, tskim);
+ }
+
+ bfa_wc_wait(&tskim->wc);
+}
+
+/**
+ * Send task management request to firmware.
+ */
+static bfa_boolean_t
+bfa_tskim_send(struct bfa_tskim_s *tskim)
+{
+ struct bfa_itnim_s *itnim = tskim->itnim;
+ struct bfi_tskim_req_s *m;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(tskim->bfa, itnim->reqq);
+ if (!m)
+ return BFA_FALSE;
+
+ /**
+ * build i/o request message next
+ */
+ bfi_h2i_set(m->mh, BFI_MC_TSKIM, BFI_TSKIM_H2I_TM_REQ,
+ bfa_lpuid(tskim->bfa));
+
+ m->tsk_tag = bfa_os_htons(tskim->tsk_tag);
+ m->itn_fhdl = tskim->itnim->rport->fw_handle;
+ m->t_secs = tskim->tsecs;
+ m->lun = tskim->lun;
+ m->tm_flags = tskim->tm_cmnd;
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(tskim->bfa, itnim->reqq);
+ return BFA_TRUE;
+}
+
+/**
+ * Send abort request to cleanup an active TM to firmware.
+ */
+static bfa_boolean_t
+bfa_tskim_send_abort(struct bfa_tskim_s *tskim)
+{
+ struct bfa_itnim_s *itnim = tskim->itnim;
+ struct bfi_tskim_abortreq_s *m;
+
+ /**
+ * check for room in queue to send request now
+ */
+ m = bfa_reqq_next(tskim->bfa, itnim->reqq);
+ if (!m)
+ return BFA_FALSE;
+
+ /**
+ * build i/o request message next
+ */
+ bfi_h2i_set(m->mh, BFI_MC_TSKIM, BFI_TSKIM_H2I_ABORT_REQ,
+ bfa_lpuid(tskim->bfa));
+
+ m->tsk_tag = bfa_os_htons(tskim->tsk_tag);
+
+ /**
+ * queue I/O message to firmware
+ */
+ bfa_reqq_produce(tskim->bfa, itnim->reqq);
+ return BFA_TRUE;
+}
+
+/**
+ * Call to resume task management cmnd waiting for room in request queue.
+ */
+static void
+bfa_tskim_qresume(void *cbarg)
+{
+ struct bfa_tskim_s *tskim = cbarg;
+
+ bfa_fcpim_stats(tskim->fcpim, qresumes);
+ bfa_stats(tskim->itnim, tm_qresumes);
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_QRESUME);
+}
+
+/**
+ * Cleanup IOs associated with a task mangement command on IOC failures.
+ */
+static void
+bfa_tskim_iocdisable_ios(struct bfa_tskim_s *tskim)
+{
+ struct bfa_ioim_s *ioim;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &tskim->io_q) {
+ ioim = (struct bfa_ioim_s *) qe;
+ bfa_ioim_iocdisable(ioim);
+ }
+}
+
+
+
+/**
+ * bfa_tskim_friend
+ */
+
+/**
+ * Notification on completions from related ioim.
+ */
+void
+bfa_tskim_iodone(struct bfa_tskim_s *tskim)
+{
+ bfa_wc_down(&tskim->wc);
+}
+
+/**
+ * Handle IOC h/w failure notification from itnim.
+ */
+void
+bfa_tskim_iocdisable(struct bfa_tskim_s *tskim)
+{
+ tskim->notify = BFA_FALSE;
+ bfa_stats(tskim->itnim, tm_iocdowns);
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_HWFAIL);
+}
+
+/**
+ * Cleanup TM command and associated IOs as part of ITNIM offline.
+ */
+void
+bfa_tskim_cleanup(struct bfa_tskim_s *tskim)
+{
+ tskim->notify = BFA_TRUE;
+ bfa_stats(tskim->itnim, tm_cleanups);
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_CLEANUP);
+}
+
+/**
+ * Memory allocation and initialization.
+ */
+void
+bfa_tskim_attach(struct bfa_fcpim_mod_s *fcpim, struct bfa_meminfo_s *minfo)
+{
+ struct bfa_tskim_s *tskim;
+ u16 i;
+
+ INIT_LIST_HEAD(&fcpim->tskim_free_q);
+
+ tskim = (struct bfa_tskim_s *) bfa_meminfo_kva(minfo);
+ fcpim->tskim_arr = tskim;
+
+ for (i = 0; i < fcpim->num_tskim_reqs; i++, tskim++) {
+ /*
+ * initialize TSKIM
+ */
+ bfa_os_memset(tskim, 0, sizeof(struct bfa_tskim_s));
+ tskim->tsk_tag = i;
+ tskim->bfa = fcpim->bfa;
+ tskim->fcpim = fcpim;
+ tskim->notify = BFA_FALSE;
+ bfa_reqq_winit(&tskim->reqq_wait, bfa_tskim_qresume,
+ tskim);
+ bfa_sm_set_state(tskim, bfa_tskim_sm_uninit);
+
+ list_add_tail(&tskim->qe, &fcpim->tskim_free_q);
+ }
+
+ bfa_meminfo_kva(minfo) = (u8 *) tskim;
+}
+
+void
+bfa_tskim_detach(struct bfa_fcpim_mod_s *fcpim)
+{
+ /**
+ * @todo
+ */
+}
+
+void
+bfa_tskim_isr(struct bfa_s *bfa, struct bfi_msg_s *m)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+ struct bfi_tskim_rsp_s *rsp = (struct bfi_tskim_rsp_s *) m;
+ struct bfa_tskim_s *tskim;
+ u16 tsk_tag = bfa_os_ntohs(rsp->tsk_tag);
+
+ tskim = BFA_TSKIM_FROM_TAG(fcpim, tsk_tag);
+ bfa_assert(tskim->tsk_tag == tsk_tag);
+
+ tskim->tsk_status = rsp->tsk_status;
+
+ /**
+ * Firmware sends BFI_TSKIM_STS_ABORTED status for abort
+ * requests. All other statuses are for normal completions.
+ */
+ if (rsp->tsk_status == BFI_TSKIM_STS_ABORTED) {
+ bfa_stats(tskim->itnim, tm_cleanup_comps);
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_CLEANUP_DONE);
+ } else {
+ bfa_stats(tskim->itnim, tm_fw_rsps);
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_DONE);
+ }
+}
+
+
+
+/**
+ * bfa_tskim_api
+ */
+
+
+struct bfa_tskim_s *
+bfa_tskim_alloc(struct bfa_s *bfa, struct bfad_tskim_s *dtsk)
+{
+ struct bfa_fcpim_mod_s *fcpim = BFA_FCPIM_MOD(bfa);
+ struct bfa_tskim_s *tskim;
+
+ bfa_q_deq(&fcpim->tskim_free_q, &tskim);
+
+ if (!tskim)
+ bfa_fcpim_stats(fcpim, no_tskims);
+ else
+ tskim->dtsk = dtsk;
+
+ return tskim;
+}
+
+void
+bfa_tskim_free(struct bfa_tskim_s *tskim)
+{
+ bfa_assert(bfa_q_is_on_q_func(&tskim->itnim->tsk_q, &tskim->qe));
+ list_del(&tskim->qe);
+ list_add_tail(&tskim->qe, &tskim->fcpim->tskim_free_q);
+}
+
+/**
+ * Start a task management command.
+ *
+ * @param[in] tskim BFA task management command instance
+ * @param[in] itnim i-t nexus for the task management command
+ * @param[in] lun lun, if applicable
+ * @param[in] tm_cmnd Task management command code.
+ * @param[in] t_secs Timeout in seconds
+ *
+ * @return None.
+ */
+void
+bfa_tskim_start(struct bfa_tskim_s *tskim, struct bfa_itnim_s *itnim, lun_t lun,
+ enum fcp_tm_cmnd tm_cmnd, u8 tsecs)
+{
+ tskim->itnim = itnim;
+ tskim->lun = lun;
+ tskim->tm_cmnd = tm_cmnd;
+ tskim->tsecs = tsecs;
+ tskim->notify = BFA_FALSE;
+ bfa_stats(itnim, tm_cmnds);
+
+ list_add_tail(&tskim->qe, &itnim->tsk_q);
+ bfa_sm_send_event(tskim, BFA_TSKIM_SM_START);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_uf.c BFA unsolicited frame receive implementation
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_uf.h>
+#include <cs/bfa_debug.h>
+
+BFA_TRC_FILE(HAL, UF);
+BFA_MODULE(uf);
+
+/*
+ *****************************************************************************
+ * Internal functions
+ *****************************************************************************
+ */
+static void
+__bfa_cb_uf_recv(void *cbarg, bfa_boolean_t complete)
+{
+ struct bfa_uf_s *uf = cbarg;
+ struct bfa_uf_mod_s *ufm = BFA_UF_MOD(uf->bfa);
+
+ if (complete)
+ ufm->ufrecv(ufm->cbarg, uf);
+}
+
+static void
+claim_uf_pbs(struct bfa_uf_mod_s *ufm, struct bfa_meminfo_s *mi)
+{
+ u32 uf_pb_tot_sz;
+
+ ufm->uf_pbs_kva = (struct bfa_uf_buf_s *) bfa_meminfo_dma_virt(mi);
+ ufm->uf_pbs_pa = bfa_meminfo_dma_phys(mi);
+ uf_pb_tot_sz = BFA_ROUNDUP((sizeof(struct bfa_uf_buf_s) * ufm->num_ufs),
+ BFA_DMA_ALIGN_SZ);
+
+ bfa_meminfo_dma_virt(mi) += uf_pb_tot_sz;
+ bfa_meminfo_dma_phys(mi) += uf_pb_tot_sz;
+
+ bfa_os_memset((void *)ufm->uf_pbs_kva, 0, uf_pb_tot_sz);
+}
+
+static void
+claim_uf_post_msgs(struct bfa_uf_mod_s *ufm, struct bfa_meminfo_s *mi)
+{
+ struct bfi_uf_buf_post_s *uf_bp_msg;
+ struct bfi_sge_s *sge;
+ union bfi_addr_u sga_zero = { {0} };
+ u16 i;
+ u16 buf_len;
+
+ ufm->uf_buf_posts = (struct bfi_uf_buf_post_s *) bfa_meminfo_kva(mi);
+ uf_bp_msg = ufm->uf_buf_posts;
+
+ for (i = 0, uf_bp_msg = ufm->uf_buf_posts; i < ufm->num_ufs;
+ i++, uf_bp_msg++) {
+ bfa_os_memset(uf_bp_msg, 0, sizeof(struct bfi_uf_buf_post_s));
+
+ uf_bp_msg->buf_tag = i;
+ buf_len = sizeof(struct bfa_uf_buf_s);
+ uf_bp_msg->buf_len = bfa_os_htons(buf_len);
+ bfi_h2i_set(uf_bp_msg->mh, BFI_MC_UF, BFI_UF_H2I_BUF_POST,
+ bfa_lpuid(ufm->bfa));
+
+ sge = uf_bp_msg->sge;
+ sge[0].sg_len = buf_len;
+ sge[0].flags = BFI_SGE_DATA_LAST;
+ bfa_dma_addr_set(sge[0].sga, ufm_pbs_pa(ufm, i));
+ bfa_sge_to_be(sge);
+
+ sge[1].sg_len = buf_len;
+ sge[1].flags = BFI_SGE_PGDLEN;
+ sge[1].sga = sga_zero;
+ bfa_sge_to_be(&sge[1]);
+ }
+
+ /**
+ * advance pointer beyond consumed memory
+ */
+ bfa_meminfo_kva(mi) = (u8 *) uf_bp_msg;
+}
+
+static void
+claim_ufs(struct bfa_uf_mod_s *ufm, struct bfa_meminfo_s *mi)
+{
+ u16 i;
+ struct bfa_uf_s *uf;
+
+ /*
+ * Claim block of memory for UF list
+ */
+ ufm->uf_list = (struct bfa_uf_s *) bfa_meminfo_kva(mi);
+
+ /*
+ * Initialize UFs and queue it in UF free queue
+ */
+ for (i = 0, uf = ufm->uf_list; i < ufm->num_ufs; i++, uf++) {
+ bfa_os_memset(uf, 0, sizeof(struct bfa_uf_s));
+ uf->bfa = ufm->bfa;
+ uf->uf_tag = i;
+ uf->pb_len = sizeof(struct bfa_uf_buf_s);
+ uf->buf_kva = (void *)&ufm->uf_pbs_kva[i];
+ uf->buf_pa = ufm_pbs_pa(ufm, i);
+ list_add_tail(&uf->qe, &ufm->uf_free_q);
+ }
+
+ /**
+ * advance memory pointer
+ */
+ bfa_meminfo_kva(mi) = (u8 *) uf;
+}
+
+static void
+uf_mem_claim(struct bfa_uf_mod_s *ufm, struct bfa_meminfo_s *mi)
+{
+ claim_uf_pbs(ufm, mi);
+ claim_ufs(ufm, mi);
+ claim_uf_post_msgs(ufm, mi);
+}
+
+static void
+bfa_uf_meminfo(struct bfa_iocfc_cfg_s *cfg, u32 *ndm_len, u32 *dm_len)
+{
+ u32 num_ufs = cfg->fwcfg.num_uf_bufs;
+
+ /*
+ * dma-able memory for UF posted bufs
+ */
+ *dm_len += BFA_ROUNDUP((sizeof(struct bfa_uf_buf_s) * num_ufs),
+ BFA_DMA_ALIGN_SZ);
+
+ /*
+ * kernel Virtual memory for UFs and UF buf post msg copies
+ */
+ *ndm_len += sizeof(struct bfa_uf_s) * num_ufs;
+ *ndm_len += sizeof(struct bfi_uf_buf_post_s) * num_ufs;
+}
+
+static void
+bfa_uf_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev)
+{
+ struct bfa_uf_mod_s *ufm = BFA_UF_MOD(bfa);
+
+ bfa_os_memset(ufm, 0, sizeof(struct bfa_uf_mod_s));
+ ufm->bfa = bfa;
+ ufm->num_ufs = cfg->fwcfg.num_uf_bufs;
+ INIT_LIST_HEAD(&ufm->uf_free_q);
+ INIT_LIST_HEAD(&ufm->uf_posted_q);
+
+ uf_mem_claim(ufm, meminfo);
+}
+
+static void
+bfa_uf_initdone(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_uf_detach(struct bfa_s *bfa)
+{
+}
+
+static struct bfa_uf_s *
+bfa_uf_get(struct bfa_uf_mod_s *uf_mod)
+{
+ struct bfa_uf_s *uf;
+
+ bfa_q_deq(&uf_mod->uf_free_q, &uf);
+ return (uf);
+}
+
+static void
+bfa_uf_put(struct bfa_uf_mod_s *uf_mod, struct bfa_uf_s *uf)
+{
+ list_add_tail(&uf->qe, &uf_mod->uf_free_q);
+}
+
+static bfa_status_t
+bfa_uf_post(struct bfa_uf_mod_s *ufm, struct bfa_uf_s *uf)
+{
+ struct bfi_uf_buf_post_s *uf_post_msg;
+
+ uf_post_msg = bfa_reqq_next(ufm->bfa, BFA_REQQ_FCXP);
+ if (!uf_post_msg)
+ return BFA_STATUS_FAILED;
+
+ bfa_os_memcpy(uf_post_msg, &ufm->uf_buf_posts[uf->uf_tag],
+ sizeof(struct bfi_uf_buf_post_s));
+ bfa_reqq_produce(ufm->bfa, BFA_REQQ_FCXP);
+
+ bfa_trc(ufm->bfa, uf->uf_tag);
+
+ list_add_tail(&uf->qe, &ufm->uf_posted_q);
+ return BFA_STATUS_OK;
+}
+
+static void
+bfa_uf_post_all(struct bfa_uf_mod_s *uf_mod)
+{
+ struct bfa_uf_s *uf;
+
+ while ((uf = bfa_uf_get(uf_mod)) != NULL) {
+ if (bfa_uf_post(uf_mod, uf) != BFA_STATUS_OK)
+ break;
+ }
+}
+
+static void
+uf_recv(struct bfa_s *bfa, struct bfi_uf_frm_rcvd_s *m)
+{
+ struct bfa_uf_mod_s *ufm = BFA_UF_MOD(bfa);
+ u16 uf_tag = m->buf_tag;
+ struct bfa_uf_buf_s *uf_buf = &ufm->uf_pbs_kva[uf_tag];
+ struct bfa_uf_s *uf = &ufm->uf_list[uf_tag];
+ u8 *buf = &uf_buf->d[0];
+ struct fchs_s *fchs;
+
+ m->frm_len = bfa_os_ntohs(m->frm_len);
+ m->xfr_len = bfa_os_ntohs(m->xfr_len);
+
+ fchs = (struct fchs_s *) uf_buf;
+
+ list_del(&uf->qe); /* dequeue from posted queue */
+
+ uf->data_ptr = buf;
+ uf->data_len = m->xfr_len;
+
+ bfa_assert(uf->data_len >= sizeof(struct fchs_s));
+
+ if (uf->data_len == sizeof(struct fchs_s)) {
+ bfa_plog_fchdr(bfa->plog, BFA_PL_MID_HAL_UF, BFA_PL_EID_RX,
+ uf->data_len, (struct fchs_s *) buf);
+ } else {
+ u32 pld_w0 = *((u32 *) (buf + sizeof(struct fchs_s)));
+ bfa_plog_fchdr_and_pl(bfa->plog, BFA_PL_MID_HAL_UF,
+ BFA_PL_EID_RX, uf->data_len,
+ (struct fchs_s *) buf, pld_w0);
+ }
+
+ bfa_cb_queue(bfa, &uf->hcb_qe, __bfa_cb_uf_recv, uf);
+}
+
+static void
+bfa_uf_stop(struct bfa_s *bfa)
+{
+}
+
+static void
+bfa_uf_iocdisable(struct bfa_s *bfa)
+{
+ struct bfa_uf_mod_s *ufm = BFA_UF_MOD(bfa);
+ struct bfa_uf_s *uf;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &ufm->uf_posted_q) {
+ uf = (struct bfa_uf_s *) qe;
+ list_del(&uf->qe);
+ bfa_uf_put(ufm, uf);
+ }
+}
+
+static void
+bfa_uf_start(struct bfa_s *bfa)
+{
+ bfa_uf_post_all(BFA_UF_MOD(bfa));
+}
+
+
+
+/**
+ * bfa_uf_api
+ */
+
+/**
+ * Register handler for all unsolicted recieve frames.
+ *
+ * @param[in] bfa BFA instance
+ * @param[in] ufrecv receive handler function
+ * @param[in] cbarg receive handler arg
+ */
+void
+bfa_uf_recv_register(struct bfa_s *bfa, bfa_cb_uf_recv_t ufrecv, void *cbarg)
+{
+ struct bfa_uf_mod_s *ufm = BFA_UF_MOD(bfa);
+
+ ufm->ufrecv = ufrecv;
+ ufm->cbarg = cbarg;
+}
+
+/**
+ * Free an unsolicited frame back to BFA.
+ *
+ * @param[in] uf unsolicited frame to be freed
+ *
+ * @return None
+ */
+void
+bfa_uf_free(struct bfa_uf_s *uf)
+{
+ bfa_uf_put(BFA_UF_MOD(uf->bfa), uf);
+ bfa_uf_post_all(BFA_UF_MOD(uf->bfa));
+}
+
+
+
+/**
+ * uf_pub BFA uf module public functions
+ */
+
+void
+bfa_uf_isr(struct bfa_s *bfa, struct bfi_msg_s *msg)
+{
+ bfa_trc(bfa, msg->mhdr.msg_id);
+
+ switch (msg->mhdr.msg_id) {
+ case BFI_UF_I2H_FRM_RCVD:
+ uf_recv(bfa, (struct bfi_uf_frm_rcvd_s *) msg);
+ break;
+
+ default:
+ bfa_trc(bfa, msg->mhdr.msg_id);
+ bfa_assert(0);
+ }
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_UF_PRIV_H__
+#define __BFA_UF_PRIV_H__
+
+#include <cs/bfa_sm.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_uf.h>
+
+#define BFA_UF_MIN (4)
+
+struct bfa_uf_mod_s {
+ struct bfa_s *bfa; /* back pointer to BFA */
+ struct bfa_uf_s *uf_list; /* array of UFs */
+ u16 num_ufs; /* num unsolicited rx frames */
+ struct list_head uf_free_q; /* free UFs */
+ struct list_head uf_posted_q; /* UFs posted to IOC */
+ struct bfa_uf_buf_s *uf_pbs_kva; /* list UF bufs request pld */
+ u64 uf_pbs_pa; /* phy addr for UF bufs */
+ struct bfi_uf_buf_post_s *uf_buf_posts;
+ /* pre-built UF post msgs */
+ bfa_cb_uf_recv_t ufrecv; /* uf recv handler function */
+ void *cbarg; /* uf receive handler arg */
+};
+
+#define BFA_UF_MOD(__bfa) (&(__bfa)->modules.uf_mod)
+
+#define ufm_pbs_pa(_ufmod, _uftag) \
+ ((_ufmod)->uf_pbs_pa + sizeof(struct bfa_uf_buf_s) * (_uftag))
+
+void bfa_uf_isr(struct bfa_s *bfa, struct bfi_msg_s *msg);
+
+#endif /* __BFA_UF_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfad.c Linux driver PCI interface module.
+ */
+
+#include <linux/module.h>
+#include "bfad_drv.h"
+#include "bfad_im.h"
+#include "bfad_tm.h"
+#include "bfad_ipfc.h"
+#include "bfad_trcmod.h"
+#include <fcb/bfa_fcb_vf.h>
+#include <fcb/bfa_fcb_rport.h>
+#include <fcb/bfa_fcb_port.h>
+#include <fcb/bfa_fcb.h>
+
+BFA_TRC_FILE(LDRV, BFAD);
+static DEFINE_MUTEX(bfad_mutex);
+LIST_HEAD(bfad_list);
+static int bfad_inst;
+int bfad_supported_fc4s;
+
+static char *host_name;
+static char *os_name;
+static char *os_patch;
+static int num_rports;
+static int num_ios;
+static int num_tms;
+static int num_fcxps;
+static int num_ufbufs;
+static int reqq_size;
+static int rspq_size;
+static int num_sgpgs;
+static int rport_del_timeout = BFA_FCS_RPORT_DEF_DEL_TIMEOUT;
+static int bfa_io_max_sge = BFAD_IO_MAX_SGE;
+static int log_level = BFA_LOG_WARNING;
+static int ioc_auto_recover = BFA_TRUE;
+static int ipfc_enable = BFA_FALSE;
+static int ipfc_mtu = -1;
+int bfa_lun_queue_depth = BFAD_LUN_QUEUE_DEPTH;
+int bfa_linkup_delay = -1;
+
+module_param(os_name, charp, S_IRUGO | S_IWUSR);
+module_param(os_patch, charp, S_IRUGO | S_IWUSR);
+module_param(host_name, charp, S_IRUGO | S_IWUSR);
+module_param(num_rports, int, S_IRUGO | S_IWUSR);
+module_param(num_ios, int, S_IRUGO | S_IWUSR);
+module_param(num_tms, int, S_IRUGO | S_IWUSR);
+module_param(num_fcxps, int, S_IRUGO | S_IWUSR);
+module_param(num_ufbufs, int, S_IRUGO | S_IWUSR);
+module_param(reqq_size, int, S_IRUGO | S_IWUSR);
+module_param(rspq_size, int, S_IRUGO | S_IWUSR);
+module_param(num_sgpgs, int, S_IRUGO | S_IWUSR);
+module_param(rport_del_timeout, int, S_IRUGO | S_IWUSR);
+module_param(bfa_lun_queue_depth, int, S_IRUGO | S_IWUSR);
+module_param(bfa_io_max_sge, int, S_IRUGO | S_IWUSR);
+module_param(log_level, int, S_IRUGO | S_IWUSR);
+module_param(ioc_auto_recover, int, S_IRUGO | S_IWUSR);
+module_param(ipfc_enable, int, S_IRUGO | S_IWUSR);
+module_param(ipfc_mtu, int, S_IRUGO | S_IWUSR);
+module_param(bfa_linkup_delay, int, S_IRUGO | S_IWUSR);
+
+/*
+ * Stores the module parm num_sgpgs value;
+ * used to reset for bfad next instance.
+ */
+static int num_sgpgs_parm;
+
+static bfa_status_t
+bfad_fc4_probe(struct bfad_s *bfad)
+{
+ int rc;
+
+ rc = bfad_im_probe(bfad);
+ if (rc != BFA_STATUS_OK)
+ goto ext;
+
+ bfad_tm_probe(bfad);
+
+ if (ipfc_enable)
+ bfad_ipfc_probe(bfad);
+ext:
+ return rc;
+}
+
+static void
+bfad_fc4_probe_undo(struct bfad_s *bfad)
+{
+ bfad_im_probe_undo(bfad);
+ bfad_tm_probe_undo(bfad);
+ if (ipfc_enable)
+ bfad_ipfc_probe_undo(bfad);
+}
+
+static void
+bfad_fc4_probe_post(struct bfad_s *bfad)
+{
+ if (bfad->im)
+ bfad_im_probe_post(bfad->im);
+
+ bfad_tm_probe_post(bfad);
+ if (ipfc_enable)
+ bfad_ipfc_probe_post(bfad);
+}
+
+static bfa_status_t
+bfad_fc4_port_new(struct bfad_s *bfad, struct bfad_port_s *port, int roles)
+{
+ int rc = BFA_STATUS_FAILED;
+
+ if (roles & BFA_PORT_ROLE_FCP_IM)
+ rc = bfad_im_port_new(bfad, port);
+ if (rc != BFA_STATUS_OK)
+ goto ext;
+
+ if (roles & BFA_PORT_ROLE_FCP_TM)
+ rc = bfad_tm_port_new(bfad, port);
+ if (rc != BFA_STATUS_OK)
+ goto ext;
+
+ if ((roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable)
+ rc = bfad_ipfc_port_new(bfad, port, port->pvb_type);
+ext:
+ return rc;
+}
+
+static void
+bfad_fc4_port_delete(struct bfad_s *bfad, struct bfad_port_s *port, int roles)
+{
+ if (roles & BFA_PORT_ROLE_FCP_IM)
+ bfad_im_port_delete(bfad, port);
+
+ if (roles & BFA_PORT_ROLE_FCP_TM)
+ bfad_tm_port_delete(bfad, port);
+
+ if ((roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable)
+ bfad_ipfc_port_delete(bfad, port);
+}
+
+/**
+ * BFA callbacks
+ */
+void
+bfad_hcb_comp(void *arg, bfa_status_t status)
+{
+ struct bfad_hal_comp *fcomp = (struct bfad_hal_comp *)arg;
+
+ fcomp->status = status;
+ complete(&fcomp->comp);
+}
+
+/**
+ * bfa_init callback
+ */
+void
+bfa_cb_init(void *drv, bfa_status_t init_status)
+{
+ struct bfad_s *bfad = drv;
+
+ if (init_status == BFA_STATUS_OK)
+ bfad->bfad_flags |= BFAD_HAL_INIT_DONE;
+
+ complete(&bfad->comp);
+}
+
+
+
+/**
+ * BFA_FCS callbacks
+ */
+static struct bfad_port_s *
+bfad_get_drv_port(struct bfad_s *bfad, struct bfad_vf_s *vf_drv,
+ struct bfad_vport_s *vp_drv)
+{
+ return ((vp_drv) ? (&(vp_drv)->drv_port)
+ : ((vf_drv) ? (&(vf_drv)->base_port) : (&(bfad)->pport)));
+}
+
+struct bfad_port_s *
+bfa_fcb_port_new(struct bfad_s *bfad, struct bfa_fcs_port_s *port,
+ enum bfa_port_role roles, struct bfad_vf_s *vf_drv,
+ struct bfad_vport_s *vp_drv)
+{
+ bfa_status_t rc;
+ struct bfad_port_s *port_drv;
+
+ if (!vp_drv && !vf_drv) {
+ port_drv = &bfad->pport;
+ port_drv->pvb_type = BFAD_PORT_PHYS_BASE;
+ } else if (!vp_drv && vf_drv) {
+ port_drv = &vf_drv->base_port;
+ port_drv->pvb_type = BFAD_PORT_VF_BASE;
+ } else if (vp_drv && !vf_drv) {
+ port_drv = &vp_drv->drv_port;
+ port_drv->pvb_type = BFAD_PORT_PHYS_VPORT;
+ } else {
+ port_drv = &vp_drv->drv_port;
+ port_drv->pvb_type = BFAD_PORT_VF_VPORT;
+ }
+
+ port_drv->fcs_port = port;
+ port_drv->roles = roles;
+ rc = bfad_fc4_port_new(bfad, port_drv, roles);
+ if (rc != BFA_STATUS_OK) {
+ bfad_fc4_port_delete(bfad, port_drv, roles);
+ port_drv = NULL;
+ }
+
+ return port_drv;
+}
+
+void
+bfa_fcb_port_delete(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv)
+{
+ struct bfad_port_s *port_drv;
+
+ /*
+ * this will be only called from rmmod context
+ */
+ if (vp_drv && !vp_drv->comp_del) {
+ port_drv = bfad_get_drv_port(bfad, vf_drv, vp_drv);
+ bfa_trc(bfad, roles);
+ bfad_fc4_port_delete(bfad, port_drv, roles);
+ }
+}
+
+void
+bfa_fcb_port_online(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv)
+{
+ struct bfad_port_s *port_drv = bfad_get_drv_port(bfad, vf_drv, vp_drv);
+
+ if (roles & BFA_PORT_ROLE_FCP_IM)
+ bfad_im_port_online(bfad, port_drv);
+
+ if (roles & BFA_PORT_ROLE_FCP_TM)
+ bfad_tm_port_online(bfad, port_drv);
+
+ if ((roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable)
+ bfad_ipfc_port_online(bfad, port_drv);
+
+ bfad->bfad_flags |= BFAD_PORT_ONLINE;
+}
+
+void
+bfa_fcb_port_offline(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv)
+{
+ struct bfad_port_s *port_drv = bfad_get_drv_port(bfad, vf_drv, vp_drv);
+
+ if (roles & BFA_PORT_ROLE_FCP_IM)
+ bfad_im_port_offline(bfad, port_drv);
+
+ if (roles & BFA_PORT_ROLE_FCP_TM)
+ bfad_tm_port_offline(bfad, port_drv);
+
+ if ((roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable)
+ bfad_ipfc_port_offline(bfad, port_drv);
+}
+
+void
+bfa_fcb_vport_delete(struct bfad_vport_s *vport_drv)
+{
+ if (vport_drv->comp_del) {
+ complete(vport_drv->comp_del);
+ return;
+ }
+
+ kfree(vport_drv);
+}
+
+/**
+ * FCS RPORT alloc callback, after successful PLOGI by FCS
+ */
+bfa_status_t
+bfa_fcb_rport_alloc(struct bfad_s *bfad, struct bfa_fcs_rport_s **rport,
+ struct bfad_rport_s **rport_drv)
+{
+ bfa_status_t rc = BFA_STATUS_OK;
+
+ *rport_drv = kzalloc(sizeof(struct bfad_rport_s), GFP_ATOMIC);
+ if (*rport_drv == NULL) {
+ rc = BFA_STATUS_ENOMEM;
+ goto ext;
+ }
+
+ *rport = &(*rport_drv)->fcs_rport;
+
+ext:
+ return rc;
+}
+
+
+
+void
+bfad_hal_mem_release(struct bfad_s *bfad)
+{
+ int i;
+ struct bfa_meminfo_s *hal_meminfo = &bfad->meminfo;
+ struct bfa_mem_elem_s *meminfo_elem;
+
+ for (i = 0; i < BFA_MEM_TYPE_MAX; i++) {
+ meminfo_elem = &hal_meminfo->meminfo[i];
+ if (meminfo_elem->kva != NULL) {
+ switch (meminfo_elem->mem_type) {
+ case BFA_MEM_TYPE_KVA:
+ vfree(meminfo_elem->kva);
+ break;
+ case BFA_MEM_TYPE_DMA:
+ dma_free_coherent(&bfad->pcidev->dev,
+ meminfo_elem->mem_len,
+ meminfo_elem->kva,
+ (dma_addr_t) meminfo_elem->dma);
+ break;
+ default:
+ bfa_assert(0);
+ break;
+ }
+ }
+ }
+
+ memset(hal_meminfo, 0, sizeof(struct bfa_meminfo_s));
+}
+
+void
+bfad_update_hal_cfg(struct bfa_iocfc_cfg_s *bfa_cfg)
+{
+ if (num_rports > 0)
+ bfa_cfg->fwcfg.num_rports = num_rports;
+ if (num_ios > 0)
+ bfa_cfg->fwcfg.num_ioim_reqs = num_ios;
+ if (num_tms > 0)
+ bfa_cfg->fwcfg.num_tskim_reqs = num_tms;
+ if (num_fcxps > 0)
+ bfa_cfg->fwcfg.num_fcxp_reqs = num_fcxps;
+ if (num_ufbufs > 0)
+ bfa_cfg->fwcfg.num_uf_bufs = num_ufbufs;
+ if (reqq_size > 0)
+ bfa_cfg->drvcfg.num_reqq_elems = reqq_size;
+ if (rspq_size > 0)
+ bfa_cfg->drvcfg.num_rspq_elems = rspq_size;
+ if (num_sgpgs > 0)
+ bfa_cfg->drvcfg.num_sgpgs = num_sgpgs;
+
+ /*
+ * populate the hal values back to the driver for sysfs use.
+ * otherwise, the default values will be shown as 0 in sysfs
+ */
+ num_rports = bfa_cfg->fwcfg.num_rports;
+ num_ios = bfa_cfg->fwcfg.num_ioim_reqs;
+ num_tms = bfa_cfg->fwcfg.num_tskim_reqs;
+ num_fcxps = bfa_cfg->fwcfg.num_fcxp_reqs;
+ num_ufbufs = bfa_cfg->fwcfg.num_uf_bufs;
+ reqq_size = bfa_cfg->drvcfg.num_reqq_elems;
+ rspq_size = bfa_cfg->drvcfg.num_rspq_elems;
+ num_sgpgs = bfa_cfg->drvcfg.num_sgpgs;
+}
+
+bfa_status_t
+bfad_hal_mem_alloc(struct bfad_s *bfad)
+{
+ struct bfa_meminfo_s *hal_meminfo = &bfad->meminfo;
+ struct bfa_mem_elem_s *meminfo_elem;
+ bfa_status_t rc = BFA_STATUS_OK;
+ dma_addr_t phys_addr;
+ int retry_count = 0;
+ int reset_value = 1;
+ int min_num_sgpgs = 512;
+ void *kva;
+ int i;
+
+ bfa_cfg_get_default(&bfad->ioc_cfg);
+
+retry:
+ bfad_update_hal_cfg(&bfad->ioc_cfg);
+ bfad->cfg_data.ioc_queue_depth = bfad->ioc_cfg.fwcfg.num_ioim_reqs;
+ bfa_cfg_get_meminfo(&bfad->ioc_cfg, hal_meminfo);
+
+ for (i = 0; i < BFA_MEM_TYPE_MAX; i++) {
+ meminfo_elem = &hal_meminfo->meminfo[i];
+ switch (meminfo_elem->mem_type) {
+ case BFA_MEM_TYPE_KVA:
+ kva = vmalloc(meminfo_elem->mem_len);
+ if (kva == NULL) {
+ bfad_hal_mem_release(bfad);
+ rc = BFA_STATUS_ENOMEM;
+ goto ext;
+ }
+ memset(kva, 0, meminfo_elem->mem_len);
+ meminfo_elem->kva = kva;
+ break;
+ case BFA_MEM_TYPE_DMA:
+ kva = dma_alloc_coherent(&bfad->pcidev->dev,
+ meminfo_elem->mem_len,
+ &phys_addr, GFP_KERNEL);
+ if (kva == NULL) {
+ bfad_hal_mem_release(bfad);
+ /*
+ * If we cannot allocate with default
+ * num_sgpages try with half the value.
+ */
+ if (num_sgpgs > min_num_sgpgs) {
+ printk(KERN_INFO "bfad[%d]: memory"
+ " allocation failed with"
+ " num_sgpgs: %d\n",
+ bfad->inst_no, num_sgpgs);
+ nextLowerInt(&num_sgpgs);
+ printk(KERN_INFO "bfad[%d]: trying to"
+ " allocate memory with"
+ " num_sgpgs: %d\n",
+ bfad->inst_no, num_sgpgs);
+ retry_count++;
+ goto retry;
+ } else {
+ if (num_sgpgs_parm > 0)
+ num_sgpgs = num_sgpgs_parm;
+ else {
+ reset_value =
+ (1 << retry_count);
+ num_sgpgs *= reset_value;
+ }
+ rc = BFA_STATUS_ENOMEM;
+ goto ext;
+ }
+ }
+
+ if (num_sgpgs_parm > 0)
+ num_sgpgs = num_sgpgs_parm;
+ else {
+ reset_value = (1 << retry_count);
+ num_sgpgs *= reset_value;
+ }
+
+ memset(kva, 0, meminfo_elem->mem_len);
+ meminfo_elem->kva = kva;
+ meminfo_elem->dma = phys_addr;
+ break;
+ default:
+ break;
+
+ }
+ }
+ext:
+ return rc;
+}
+
+/**
+ * Create a vport under a vf.
+ */
+bfa_status_t
+bfad_vport_create(struct bfad_s *bfad, u16 vf_id,
+ struct bfa_port_cfg_s *port_cfg)
+{
+ struct bfad_vport_s *vport;
+ int rc = BFA_STATUS_OK;
+ unsigned long flags;
+ struct completion fcomp;
+
+ vport = kzalloc(sizeof(struct bfad_vport_s), GFP_KERNEL);
+ if (!vport) {
+ rc = BFA_STATUS_ENOMEM;
+ goto ext;
+ }
+
+ vport->drv_port.bfad = bfad;
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ rc = bfa_fcs_vport_create(&vport->fcs_vport, &bfad->bfa_fcs, vf_id,
+ port_cfg, vport);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ if (rc != BFA_STATUS_OK)
+ goto ext_free_vport;
+
+ if (port_cfg->roles & BFA_PORT_ROLE_FCP_IM) {
+ rc = bfad_im_scsi_host_alloc(bfad, vport->drv_port.im_port);
+ if (rc != BFA_STATUS_OK)
+ goto ext_free_fcs_vport;
+ }
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_fcs_vport_start(&vport->fcs_vport);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ return BFA_STATUS_OK;
+
+ext_free_fcs_vport:
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ vport->comp_del = &fcomp;
+ init_completion(vport->comp_del);
+ bfa_fcs_vport_delete(&vport->fcs_vport);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ wait_for_completion(vport->comp_del);
+ext_free_vport:
+ kfree(vport);
+ext:
+ return rc;
+}
+
+/**
+ * Create a vf and its base vport implicitely.
+ */
+bfa_status_t
+bfad_vf_create(struct bfad_s *bfad, u16 vf_id,
+ struct bfa_port_cfg_s *port_cfg)
+{
+ struct bfad_vf_s *vf;
+ int rc = BFA_STATUS_OK;
+
+ vf = kzalloc(sizeof(struct bfad_vf_s), GFP_KERNEL);
+ if (!vf) {
+ rc = BFA_STATUS_FAILED;
+ goto ext;
+ }
+
+ rc = bfa_fcs_vf_create(&vf->fcs_vf, &bfad->bfa_fcs, vf_id, port_cfg,
+ vf);
+ if (rc != BFA_STATUS_OK)
+ kfree(vf);
+ext:
+ return rc;
+}
+
+void
+bfad_bfa_tmo(unsigned long data)
+{
+ struct bfad_s *bfad = (struct bfad_s *)data;
+ unsigned long flags;
+ struct list_head doneq;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+ bfa_timer_tick(&bfad->bfa);
+
+ bfa_comp_deq(&bfad->bfa, &doneq);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ if (!list_empty(&doneq)) {
+ bfa_comp_process(&bfad->bfa, &doneq);
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_comp_free(&bfad->bfa, &doneq);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ }
+
+ mod_timer(&bfad->hal_tmo, jiffies + msecs_to_jiffies(BFA_TIMER_FREQ));
+}
+
+void
+bfad_init_timer(struct bfad_s *bfad)
+{
+ init_timer(&bfad->hal_tmo);
+ bfad->hal_tmo.function = bfad_bfa_tmo;
+ bfad->hal_tmo.data = (unsigned long)bfad;
+
+ mod_timer(&bfad->hal_tmo, jiffies + msecs_to_jiffies(BFA_TIMER_FREQ));
+}
+
+int
+bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad)
+{
+ unsigned long bar0_len;
+ int rc = -ENODEV;
+
+ if (pci_enable_device(pdev)) {
+ BFA_PRINTF(BFA_ERR, "pci_enable_device fail %p\n", pdev);
+ goto out;
+ }
+
+ if (pci_request_regions(pdev, BFAD_DRIVER_NAME))
+ goto out_disable_device;
+
+ pci_set_master(pdev);
+
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64)) != 0)
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) {
+ BFA_PRINTF(BFA_ERR, "pci_set_dma_mask fail %p\n", pdev);
+ goto out_release_region;
+ }
+
+ bfad->pci_bar0_map = pci_resource_start(pdev, 0);
+ bar0_len = pci_resource_len(pdev, 0);
+ bfad->pci_bar0_kva = ioremap(bfad->pci_bar0_map, bar0_len);
+
+ if (bfad->pci_bar0_kva == NULL) {
+ BFA_PRINTF(BFA_ERR, "Fail to map bar0\n");
+ goto out_release_region;
+ }
+
+ bfad->hal_pcidev.pci_slot = PCI_SLOT(pdev->devfn);
+ bfad->hal_pcidev.pci_func = PCI_FUNC(pdev->devfn);
+ bfad->hal_pcidev.pci_bar_kva = bfad->pci_bar0_kva;
+ bfad->hal_pcidev.device_id = pdev->device;
+ bfad->pci_name = pci_name(pdev);
+
+ bfad->pci_attr.vendor_id = pdev->vendor;
+ bfad->pci_attr.device_id = pdev->device;
+ bfad->pci_attr.ssid = pdev->subsystem_device;
+ bfad->pci_attr.ssvid = pdev->subsystem_vendor;
+ bfad->pci_attr.pcifn = PCI_FUNC(pdev->devfn);
+
+ bfad->pcidev = pdev;
+ return 0;
+
+out_release_region:
+ pci_release_regions(pdev);
+out_disable_device:
+ pci_disable_device(pdev);
+out:
+ return rc;
+}
+
+void
+bfad_pci_uninit(struct pci_dev *pdev, struct bfad_s *bfad)
+{
+#if defined(__ia64__)
+ pci_iounmap(pdev, bfad->pci_bar0_kva);
+#else
+ iounmap(bfad->pci_bar0_kva);
+#endif
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+}
+
+void
+bfad_fcs_port_cfg(struct bfad_s *bfad)
+{
+ struct bfa_port_cfg_s port_cfg;
+ struct bfa_pport_attr_s attr;
+ char symname[BFA_SYMNAME_MAXLEN];
+
+ sprintf(symname, "%s-%d", BFAD_DRIVER_NAME, bfad->inst_no);
+ memcpy(port_cfg.sym_name.symname, symname, strlen(symname));
+ bfa_pport_get_attr(&bfad->bfa, &attr);
+ port_cfg.nwwn = attr.nwwn;
+ port_cfg.pwwn = attr.pwwn;
+
+ bfa_fcs_cfg_base_port(&bfad->bfa_fcs, &port_cfg);
+}
+
+bfa_status_t
+bfad_drv_init(struct bfad_s *bfad)
+{
+ bfa_status_t rc;
+ unsigned long flags;
+ struct bfa_fcs_driver_info_s driver_info;
+ int i;
+
+ bfad->cfg_data.rport_del_timeout = rport_del_timeout;
+ bfad->cfg_data.lun_queue_depth = bfa_lun_queue_depth;
+ bfad->cfg_data.io_max_sge = bfa_io_max_sge;
+ bfad->cfg_data.binding_method = FCP_PWWN_BINDING;
+
+ rc = bfad_hal_mem_alloc(bfad);
+ if (rc != BFA_STATUS_OK) {
+ printk(KERN_WARNING "bfad%d bfad_hal_mem_alloc failure\n",
+ bfad->inst_no);
+ printk(KERN_WARNING
+ "Not enough memory to attach all Brocade HBA ports,"
+ " System may need more memory.\n");
+ goto out_hal_mem_alloc_failure;
+ }
+
+ bfa_init_log(&bfad->bfa, bfad->logmod);
+ bfa_init_trc(&bfad->bfa, bfad->trcmod);
+ bfa_init_aen(&bfad->bfa, bfad->aen);
+ INIT_LIST_HEAD(&bfad->file_q);
+ INIT_LIST_HEAD(&bfad->file_free_q);
+ for (i = 0; i < BFAD_AEN_MAX_APPS; i++) {
+ bfa_q_qe_init(&bfad->file_buf[i].qe);
+ list_add_tail(&bfad->file_buf[i].qe, &bfad->file_free_q);
+ }
+ bfa_init_plog(&bfad->bfa, &bfad->plog_buf);
+ bfa_plog_init(&bfad->plog_buf);
+ bfa_plog_str(&bfad->plog_buf, BFA_PL_MID_DRVR, BFA_PL_EID_DRIVER_START,
+ 0, "Driver Attach");
+
+ bfa_attach(&bfad->bfa, bfad, &bfad->ioc_cfg, &bfad->meminfo,
+ &bfad->hal_pcidev);
+
+ init_completion(&bfad->comp);
+
+ /*
+ * Enable Interrupt and wait bfa_init completion
+ */
+ if (bfad_setup_intr(bfad)) {
+ printk(KERN_WARNING "bfad%d: bfad_setup_intr failed\n",
+ bfad->inst_no);
+ goto out_setup_intr_failure;
+ }
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_init(&bfad->bfa);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ /*
+ * Set up interrupt handler for each vectors
+ */
+ if ((bfad->bfad_flags & BFAD_MSIX_ON)
+ && bfad_install_msix_handler(bfad)) {
+ printk(KERN_WARNING "%s: install_msix failed, bfad%d\n",
+ __FUNCTION__, bfad->inst_no);
+ }
+
+ bfad_init_timer(bfad);
+
+ wait_for_completion(&bfad->comp);
+
+ memset(&driver_info, 0, sizeof(driver_info));
+ strncpy(driver_info.version, BFAD_DRIVER_VERSION,
+ sizeof(driver_info.version) - 1);
+ if (host_name)
+ strncpy(driver_info.host_machine_name, host_name,
+ sizeof(driver_info.host_machine_name) - 1);
+ if (os_name)
+ strncpy(driver_info.host_os_name, os_name,
+ sizeof(driver_info.host_os_name) - 1);
+ if (os_patch)
+ strncpy(driver_info.host_os_patch, os_patch,
+ sizeof(driver_info.host_os_patch) - 1);
+
+ strncpy(driver_info.os_device_name, bfad->pci_name,
+ sizeof(driver_info.os_device_name - 1));
+
+ /*
+ * FCS INIT
+ */
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_fcs_log_init(&bfad->bfa_fcs, bfad->logmod);
+ bfa_fcs_trc_init(&bfad->bfa_fcs, bfad->trcmod);
+ bfa_fcs_aen_init(&bfad->bfa_fcs, bfad->aen);
+ bfa_fcs_init(&bfad->bfa_fcs, &bfad->bfa, bfad, BFA_FALSE);
+ bfa_fcs_driver_info_init(&bfad->bfa_fcs, &driver_info);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ bfad->bfad_flags |= BFAD_DRV_INIT_DONE;
+ return BFA_STATUS_OK;
+
+out_setup_intr_failure:
+ bfa_detach(&bfad->bfa);
+ bfad_hal_mem_release(bfad);
+out_hal_mem_alloc_failure:
+ return BFA_STATUS_FAILED;
+}
+
+void
+bfad_drv_uninit(struct bfad_s *bfad)
+{
+ del_timer_sync(&bfad->hal_tmo);
+ bfa_isr_disable(&bfad->bfa);
+ bfa_detach(&bfad->bfa);
+ bfad_remove_intr(bfad);
+ bfa_assert(list_empty(&bfad->file_q));
+ bfad_hal_mem_release(bfad);
+}
+
+void
+bfad_drv_start(struct bfad_s *bfad)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_start(&bfad->bfa);
+ bfa_fcs_start(&bfad->bfa_fcs);
+ bfad->bfad_flags |= BFAD_HAL_START_DONE;
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ bfad_fc4_probe_post(bfad);
+}
+
+void
+bfad_drv_stop(struct bfad_s *bfad)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ init_completion(&bfad->comp);
+ bfad->pport.flags |= BFAD_PORT_DELETE;
+ bfa_fcs_exit(&bfad->bfa_fcs);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ wait_for_completion(&bfad->comp);
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ init_completion(&bfad->comp);
+ bfa_stop(&bfad->bfa);
+ bfad->bfad_flags &= ~BFAD_HAL_START_DONE;
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ wait_for_completion(&bfad->comp);
+}
+
+bfa_status_t
+bfad_cfg_pport(struct bfad_s *bfad, enum bfa_port_role role)
+{
+ int rc = BFA_STATUS_OK;
+
+ /*
+ * Allocate scsi_host for the physical port
+ */
+ if ((bfad_supported_fc4s & BFA_PORT_ROLE_FCP_IM)
+ && (role & BFA_PORT_ROLE_FCP_IM)) {
+ if (bfad->pport.im_port == NULL) {
+ rc = BFA_STATUS_FAILED;
+ goto out;
+ }
+
+ rc = bfad_im_scsi_host_alloc(bfad, bfad->pport.im_port);
+ if (rc != BFA_STATUS_OK)
+ goto out;
+
+ bfad->pport.roles |= BFA_PORT_ROLE_FCP_IM;
+ }
+
+ bfad->bfad_flags |= BFAD_CFG_PPORT_DONE;
+
+out:
+ return rc;
+}
+
+void
+bfad_uncfg_pport(struct bfad_s *bfad)
+{
+ if ((bfad->pport.roles & BFA_PORT_ROLE_FCP_IPFC) && ipfc_enable) {
+ bfad_ipfc_port_delete(bfad, &bfad->pport);
+ bfad->pport.roles &= ~BFA_PORT_ROLE_FCP_IPFC;
+ }
+
+ if ((bfad_supported_fc4s & BFA_PORT_ROLE_FCP_IM)
+ && (bfad->pport.roles & BFA_PORT_ROLE_FCP_IM)) {
+ bfad_im_scsi_host_free(bfad, bfad->pport.im_port);
+ bfad_im_port_clean(bfad->pport.im_port);
+ kfree(bfad->pport.im_port);
+ bfad->pport.roles &= ~BFA_PORT_ROLE_FCP_IM;
+ }
+
+ bfad->bfad_flags &= ~BFAD_CFG_PPORT_DONE;
+}
+
+void
+bfad_drv_log_level_set(struct bfad_s *bfad)
+{
+ if (log_level > BFA_LOG_INVALID && log_level <= BFA_LOG_LEVEL_MAX)
+ bfa_log_set_level_all(&bfad->log_data, log_level);
+}
+
+ /*
+ * PCI_entry PCI driver entries * {
+ */
+
+/**
+ * PCI probe entry.
+ */
+int
+bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid)
+{
+ struct bfad_s *bfad;
+ int error = -ENODEV, retval;
+ char buf[16];
+
+ /*
+ * For single port cards - only claim function 0
+ */
+ if ((pdev->device == BFA_PCI_DEVICE_ID_FC_8G1P)
+ && (PCI_FUNC(pdev->devfn) != 0))
+ return -ENODEV;
+
+ BFA_TRACE(BFA_INFO, "bfad_pci_probe entry");
+
+ bfad = kzalloc(sizeof(struct bfad_s), GFP_KERNEL);
+ if (!bfad) {
+ error = -ENOMEM;
+ goto out;
+ }
+
+ bfad->trcmod = kzalloc(sizeof(struct bfa_trc_mod_s), GFP_KERNEL);
+ if (!bfad->trcmod) {
+ printk(KERN_WARNING "Error alloc trace buffer!\n");
+ error = -ENOMEM;
+ goto out_alloc_trace_failure;
+ }
+
+ /*
+ * LOG/TRACE INIT
+ */
+ bfa_trc_init(bfad->trcmod);
+ bfa_trc(bfad, bfad_inst);
+
+ bfad->logmod = &bfad->log_data;
+ sprintf(buf, "%d", bfad_inst);
+ bfa_log_init(bfad->logmod, buf, bfa_os_printf);
+
+ bfad_drv_log_level_set(bfad);
+
+ bfad->aen = &bfad->aen_buf;
+
+ if (!(bfad_load_fwimg(pdev))) {
+ printk(KERN_WARNING "bfad_load_fwimg failure!\n");
+ kfree(bfad->trcmod);
+ goto out_alloc_trace_failure;
+ }
+
+ retval = bfad_pci_init(pdev, bfad);
+ if (retval) {
+ printk(KERN_WARNING "bfad_pci_init failure!\n");
+ error = retval;
+ goto out_pci_init_failure;
+ }
+
+ mutex_lock(&bfad_mutex);
+ bfad->inst_no = bfad_inst++;
+ list_add_tail(&bfad->list_entry, &bfad_list);
+ mutex_unlock(&bfad_mutex);
+
+ spin_lock_init(&bfad->bfad_lock);
+ pci_set_drvdata(pdev, bfad);
+
+ bfad->ref_count = 0;
+ bfad->pport.bfad = bfad;
+
+ retval = bfad_drv_init(bfad);
+ if (retval != BFA_STATUS_OK)
+ goto out_drv_init_failure;
+ if (!(bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
+ printk(KERN_WARNING "bfad%d: hal init failed\n", bfad->inst_no);
+ goto ok;
+ }
+
+ /*
+ * PPORT FCS config
+ */
+ bfad_fcs_port_cfg(bfad);
+
+ retval = bfad_cfg_pport(bfad, BFA_PORT_ROLE_FCP_IM);
+ if (retval != BFA_STATUS_OK)
+ goto out_cfg_pport_failure;
+
+ /*
+ * BFAD level FC4 (IM/TM/IPFC) specific resource allocation
+ */
+ retval = bfad_fc4_probe(bfad);
+ if (retval != BFA_STATUS_OK) {
+ printk(KERN_WARNING "bfad_fc4_probe failed\n");
+ goto out_fc4_probe_failure;
+ }
+
+ bfad_drv_start(bfad);
+
+ /*
+ * If bfa_linkup_delay is set to -1 default; try to retrive the
+ * value using the bfad_os_get_linkup_delay(); else use the
+ * passed in module param value as the bfa_linkup_delay.
+ */
+ if (bfa_linkup_delay < 0) {
+ bfa_linkup_delay = bfad_os_get_linkup_delay(bfad);
+ bfad_os_rport_online_wait(bfad);
+ bfa_linkup_delay = -1;
+ } else {
+ bfad_os_rport_online_wait(bfad);
+ }
+
+ bfa_log(bfad->logmod, BFA_LOG_LINUX_DEVICE_CLAIMED, bfad->pci_name);
+ok:
+ return 0;
+
+out_fc4_probe_failure:
+ bfad_fc4_probe_undo(bfad);
+ bfad_uncfg_pport(bfad);
+out_cfg_pport_failure:
+ bfad_drv_uninit(bfad);
+out_drv_init_failure:
+ mutex_lock(&bfad_mutex);
+ bfad_inst--;
+ list_del(&bfad->list_entry);
+ mutex_unlock(&bfad_mutex);
+ bfad_pci_uninit(pdev, bfad);
+out_pci_init_failure:
+ kfree(bfad->trcmod);
+out_alloc_trace_failure:
+ kfree(bfad);
+out:
+ return error;
+}
+
+/**
+ * PCI remove entry.
+ */
+void
+bfad_pci_remove(struct pci_dev *pdev)
+{
+ struct bfad_s *bfad = pci_get_drvdata(pdev);
+ unsigned long flags;
+
+ bfa_trc(bfad, bfad->inst_no);
+
+ if ((bfad->bfad_flags & BFAD_DRV_INIT_DONE)
+ && !(bfad->bfad_flags & BFAD_HAL_INIT_DONE)) {
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ init_completion(&bfad->comp);
+ bfa_stop(&bfad->bfa);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ wait_for_completion(&bfad->comp);
+
+ bfad_remove_intr(bfad);
+ del_timer_sync(&bfad->hal_tmo);
+ goto hal_detach;
+ } else if (!(bfad->bfad_flags & BFAD_DRV_INIT_DONE)) {
+ goto remove_sysfs;
+ }
+
+ if (bfad->bfad_flags & BFAD_HAL_START_DONE)
+ bfad_drv_stop(bfad);
+
+ bfad_remove_intr(bfad);
+
+ del_timer_sync(&bfad->hal_tmo);
+ bfad_fc4_probe_undo(bfad);
+
+ if (bfad->bfad_flags & BFAD_CFG_PPORT_DONE)
+ bfad_uncfg_pport(bfad);
+
+hal_detach:
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_detach(&bfad->bfa);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ bfad_hal_mem_release(bfad);
+remove_sysfs:
+
+ mutex_lock(&bfad_mutex);
+ bfad_inst--;
+ list_del(&bfad->list_entry);
+ mutex_unlock(&bfad_mutex);
+ bfad_pci_uninit(pdev, bfad);
+
+ kfree(bfad->trcmod);
+ kfree(bfad);
+}
+
+
+static struct pci_device_id bfad_id_table[] = {
+ {
+ .vendor = BFA_PCI_VENDOR_ID_BROCADE,
+ .device = BFA_PCI_DEVICE_ID_FC_8G2P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ {
+ .vendor = BFA_PCI_VENDOR_ID_BROCADE,
+ .device = BFA_PCI_DEVICE_ID_FC_8G1P,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ },
+ {
+ .vendor = BFA_PCI_VENDOR_ID_BROCADE,
+ .device = BFA_PCI_DEVICE_ID_CT,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .class = (PCI_CLASS_SERIAL_FIBER << 8),
+ .class_mask = ~0,
+ },
+
+ {0, 0},
+};
+
+MODULE_DEVICE_TABLE(pci, bfad_id_table);
+
+static struct pci_driver bfad_pci_driver = {
+ .name = BFAD_DRIVER_NAME,
+ .id_table = bfad_id_table,
+ .probe = bfad_pci_probe,
+ .remove = __devexit_p(bfad_pci_remove),
+};
+
+/**
+ * Linux driver module functions
+ */
+bfa_status_t
+bfad_fc4_module_init(void)
+{
+ int rc;
+
+ rc = bfad_im_module_init();
+ if (rc != BFA_STATUS_OK)
+ goto ext;
+
+ bfad_tm_module_init();
+ if (ipfc_enable)
+ bfad_ipfc_module_init();
+ext:
+ return rc;
+}
+
+void
+bfad_fc4_module_exit(void)
+{
+ if (ipfc_enable)
+ bfad_ipfc_module_exit();
+ bfad_tm_module_exit();
+ bfad_im_module_exit();
+}
+
+/**
+ * Driver module init.
+ */
+static int __init
+bfad_init(void)
+{
+ int error = 0;
+
+ printk(KERN_INFO "Brocade BFA FC/FCOE SCSI driver - version: %s\n",
+ BFAD_DRIVER_VERSION);
+
+ if (num_sgpgs > 0)
+ num_sgpgs_parm = num_sgpgs;
+
+ error = bfad_fc4_module_init();
+ if (error) {
+ error = -ENOMEM;
+ printk(KERN_WARNING "bfad_fc4_module_init failure\n");
+ goto ext;
+ }
+
+ if (!strcmp(FCPI_NAME, " fcpim"))
+ bfad_supported_fc4s |= BFA_PORT_ROLE_FCP_IM;
+ if (!strcmp(FCPT_NAME, " fcptm"))
+ bfad_supported_fc4s |= BFA_PORT_ROLE_FCP_TM;
+ if (!strcmp(IPFC_NAME, " ipfc"))
+ bfad_supported_fc4s |= BFA_PORT_ROLE_FCP_IPFC;
+
+ bfa_ioc_auto_recover(ioc_auto_recover);
+ bfa_fcs_rport_set_del_timeout(rport_del_timeout);
+ error = pci_register_driver(&bfad_pci_driver);
+
+ if (error) {
+ printk(KERN_WARNING "bfad pci_register_driver failure\n");
+ goto ext;
+ }
+
+ return 0;
+
+ext:
+ bfad_fc4_module_exit();
+ return error;
+}
+
+/**
+ * Driver module exit.
+ */
+static void __exit
+bfad_exit(void)
+{
+ pci_unregister_driver(&bfad_pci_driver);
+ bfad_fc4_module_exit();
+ bfad_free_fwimg();
+}
+
+#define BFAD_PROTO_NAME FCPI_NAME FCPT_NAME IPFC_NAME
+
+module_init(bfad_init);
+module_exit(bfad_exit);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Brocade Fibre Channel HBA Driver" BFAD_PROTO_NAME);
+MODULE_AUTHOR("Brocade Communications Systems, Inc.");
+MODULE_VERSION(BFAD_DRIVER_VERSION);
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_attr.c Linux driver configuration interface module.
+ */
+
+#include "bfad_drv.h"
+#include "bfad_im.h"
+#include "bfad_trcmod.h"
+#include "bfad_attr.h"
+
+/**
+ * FC_transport_template FC transport template
+ */
+
+/**
+ * FC transport template entry, get SCSI target port ID.
+ */
+void
+bfad_im_get_starget_port_id(struct scsi_target *starget)
+{
+ struct Scsi_Host *shost;
+ struct bfad_im_port_s *im_port;
+ struct bfad_s *bfad;
+ struct bfad_itnim_s *itnim = NULL;
+ u32 fc_id = -1;
+ unsigned long flags;
+
+ shost = bfad_os_starget_to_shost(starget);
+ im_port = (struct bfad_im_port_s *) shost->hostdata[0];
+ bfad = im_port->bfad;
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+ itnim = bfad_os_get_itnim(im_port, starget->id);
+ if (itnim)
+ fc_id = bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim);
+
+ fc_starget_port_id(starget) = fc_id;
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * FC transport template entry, get SCSI target nwwn.
+ */
+void
+bfad_im_get_starget_node_name(struct scsi_target *starget)
+{
+ struct Scsi_Host *shost;
+ struct bfad_im_port_s *im_port;
+ struct bfad_s *bfad;
+ struct bfad_itnim_s *itnim = NULL;
+ u64 node_name = 0;
+ unsigned long flags;
+
+ shost = bfad_os_starget_to_shost(starget);
+ im_port = (struct bfad_im_port_s *) shost->hostdata[0];
+ bfad = im_port->bfad;
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+ itnim = bfad_os_get_itnim(im_port, starget->id);
+ if (itnim)
+ node_name = bfa_fcs_itnim_get_nwwn(&itnim->fcs_itnim);
+
+ fc_starget_node_name(starget) = bfa_os_htonll(node_name);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * FC transport template entry, get SCSI target pwwn.
+ */
+void
+bfad_im_get_starget_port_name(struct scsi_target *starget)
+{
+ struct Scsi_Host *shost;
+ struct bfad_im_port_s *im_port;
+ struct bfad_s *bfad;
+ struct bfad_itnim_s *itnim = NULL;
+ u64 port_name = 0;
+ unsigned long flags;
+
+ shost = bfad_os_starget_to_shost(starget);
+ im_port = (struct bfad_im_port_s *) shost->hostdata[0];
+ bfad = im_port->bfad;
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+ itnim = bfad_os_get_itnim(im_port, starget->id);
+ if (itnim)
+ port_name = bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim);
+
+ fc_starget_port_name(starget) = bfa_os_htonll(port_name);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * FC transport template entry, get SCSI host port ID.
+ */
+void
+bfad_im_get_host_port_id(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_port_s *port = im_port->port;
+
+ fc_host_port_id(shost) =
+ bfa_os_hton3b(bfa_fcs_port_get_fcid(port->fcs_port));
+}
+
+
+
+
+
+struct Scsi_Host *
+bfad_os_starget_to_shost(struct scsi_target *starget)
+{
+ return dev_to_shost(starget->dev.parent);
+}
+
+/**
+ * FC transport template entry, get SCSI host port type.
+ */
+static void
+bfad_im_get_host_port_type(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_pport_attr_s attr;
+
+ bfa_pport_get_attr(&bfad->bfa, &attr);
+
+ switch (attr.port_type) {
+ case BFA_PPORT_TYPE_NPORT:
+ fc_host_port_type(shost) = FC_PORTTYPE_NPORT;
+ break;
+ case BFA_PPORT_TYPE_NLPORT:
+ fc_host_port_type(shost) = FC_PORTTYPE_NLPORT;
+ break;
+ case BFA_PPORT_TYPE_P2P:
+ fc_host_port_type(shost) = FC_PORTTYPE_PTP;
+ break;
+ case BFA_PPORT_TYPE_LPORT:
+ fc_host_port_type(shost) = FC_PORTTYPE_LPORT;
+ break;
+ default:
+ fc_host_port_type(shost) = FC_PORTTYPE_UNKNOWN;
+ break;
+ }
+}
+
+/**
+ * FC transport template entry, get SCSI host port state.
+ */
+static void
+bfad_im_get_host_port_state(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_pport_attr_s attr;
+
+ bfa_pport_get_attr(&bfad->bfa, &attr);
+
+ switch (attr.port_state) {
+ case BFA_PPORT_ST_LINKDOWN:
+ fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN;
+ break;
+ case BFA_PPORT_ST_LINKUP:
+ fc_host_port_state(shost) = FC_PORTSTATE_ONLINE;
+ break;
+ case BFA_PPORT_ST_UNINIT:
+ case BFA_PPORT_ST_ENABLING_QWAIT:
+ case BFA_PPORT_ST_ENABLING:
+ case BFA_PPORT_ST_DISABLING_QWAIT:
+ case BFA_PPORT_ST_DISABLING:
+ case BFA_PPORT_ST_DISABLED:
+ case BFA_PPORT_ST_STOPPED:
+ case BFA_PPORT_ST_IOCDOWN:
+ default:
+ fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN;
+ break;
+ }
+}
+
+/**
+ * FC transport template entry, get SCSI host active fc4s.
+ */
+static void
+bfad_im_get_host_active_fc4s(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_port_s *port = im_port->port;
+
+ memset(fc_host_active_fc4s(shost), 0,
+ sizeof(fc_host_active_fc4s(shost)));
+
+ if (port->supported_fc4s &
+ (BFA_PORT_ROLE_FCP_IM | BFA_PORT_ROLE_FCP_TM))
+ fc_host_active_fc4s(shost)[2] = 1;
+
+ if (port->supported_fc4s & BFA_PORT_ROLE_FCP_IPFC)
+ fc_host_active_fc4s(shost)[3] = 0x20;
+
+ fc_host_active_fc4s(shost)[7] = 1;
+}
+
+/**
+ * FC transport template entry, get SCSI host link speed.
+ */
+static void
+bfad_im_get_host_speed(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_pport_attr_s attr;
+
+ bfa_pport_get_attr(&bfad->bfa, &attr);
+ switch (attr.speed) {
+ case BFA_PPORT_SPEED_8GBPS:
+ fc_host_speed(shost) = FC_PORTSPEED_8GBIT;
+ break;
+ case BFA_PPORT_SPEED_4GBPS:
+ fc_host_speed(shost) = FC_PORTSPEED_4GBIT;
+ break;
+ case BFA_PPORT_SPEED_2GBPS:
+ fc_host_speed(shost) = FC_PORTSPEED_2GBIT;
+ break;
+ case BFA_PPORT_SPEED_1GBPS:
+ fc_host_speed(shost) = FC_PORTSPEED_1GBIT;
+ break;
+ default:
+ fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
+ break;
+ }
+}
+
+/**
+ * FC transport template entry, get SCSI host port type.
+ */
+static void
+bfad_im_get_host_fabric_name(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_port_s *port = im_port->port;
+ wwn_t fabric_nwwn = 0;
+
+ fabric_nwwn = bfa_fcs_port_get_fabric_name(port->fcs_port);
+
+ fc_host_fabric_name(shost) = bfa_os_htonll(fabric_nwwn);
+
+}
+
+/**
+ * FC transport template entry, get BFAD statistics.
+ */
+static struct fc_host_statistics *
+bfad_im_get_stats(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfad_hal_comp fcomp;
+ struct fc_host_statistics *hstats;
+ bfa_status_t rc;
+ unsigned long flags;
+
+ hstats = &bfad->link_stats;
+ init_completion(&fcomp.comp);
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ memset(hstats, 0, sizeof(struct fc_host_statistics));
+ rc = bfa_pport_get_stats(&bfad->bfa,
+ (union bfa_pport_stats_u *) hstats,
+ bfad_hcb_comp, &fcomp);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ if (rc != BFA_STATUS_OK)
+ return NULL;
+
+ wait_for_completion(&fcomp.comp);
+
+ return hstats;
+}
+
+/**
+ * FC transport template entry, reset BFAD statistics.
+ */
+static void
+bfad_im_reset_stats(struct Scsi_Host *shost)
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfad_hal_comp fcomp;
+ unsigned long flags;
+ bfa_status_t rc;
+
+ init_completion(&fcomp.comp);
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ rc = bfa_pport_clear_stats(&bfad->bfa, bfad_hcb_comp, &fcomp);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ if (rc != BFA_STATUS_OK)
+ return;
+
+ wait_for_completion(&fcomp.comp);
+
+ return;
+}
+
+/**
+ * FC transport template entry, get rport loss timeout.
+ */
+static void
+bfad_im_get_rport_loss_tmo(struct fc_rport *rport)
+{
+ struct bfad_itnim_data_s *itnim_data = rport->dd_data;
+ struct bfad_itnim_s *itnim = itnim_data->itnim;
+ struct bfad_s *bfad = itnim->im->bfad;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ rport->dev_loss_tmo = bfa_fcpim_path_tov_get(&bfad->bfa);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * FC transport template entry, set rport loss timeout.
+ */
+static void
+bfad_im_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout)
+{
+ struct bfad_itnim_data_s *itnim_data = rport->dd_data;
+ struct bfad_itnim_s *itnim = itnim_data->itnim;
+ struct bfad_s *bfad = itnim->im->bfad;
+ unsigned long flags;
+
+ if (timeout > 0) {
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_fcpim_path_tov_set(&bfad->bfa, timeout);
+ rport->dev_loss_tmo = bfa_fcpim_path_tov_get(&bfad->bfa);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ }
+
+}
+
+struct fc_function_template bfad_im_fc_function_template = {
+
+ /* Target dynamic attributes */
+ .get_starget_port_id = bfad_im_get_starget_port_id,
+ .show_starget_port_id = 1,
+ .get_starget_node_name = bfad_im_get_starget_node_name,
+ .show_starget_node_name = 1,
+ .get_starget_port_name = bfad_im_get_starget_port_name,
+ .show_starget_port_name = 1,
+
+ /* Host dynamic attribute */
+ .get_host_port_id = bfad_im_get_host_port_id,
+ .show_host_port_id = 1,
+
+ /* Host fixed attributes */
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+ .show_host_supported_classes = 1,
+ .show_host_supported_fc4s = 1,
+ .show_host_supported_speeds = 1,
+ .show_host_maxframe_size = 1,
+
+ /* More host dynamic attributes */
+ .show_host_port_type = 1,
+ .get_host_port_type = bfad_im_get_host_port_type,
+ .show_host_port_state = 1,
+ .get_host_port_state = bfad_im_get_host_port_state,
+ .show_host_active_fc4s = 1,
+ .get_host_active_fc4s = bfad_im_get_host_active_fc4s,
+ .show_host_speed = 1,
+ .get_host_speed = bfad_im_get_host_speed,
+ .show_host_fabric_name = 1,
+ .get_host_fabric_name = bfad_im_get_host_fabric_name,
+
+ .show_host_symbolic_name = 1,
+
+ /* Statistics */
+ .get_fc_host_stats = bfad_im_get_stats,
+ .reset_fc_host_stats = bfad_im_reset_stats,
+
+ /* Allocation length for host specific data */
+ .dd_fcrport_size = sizeof(struct bfad_itnim_data_s *),
+
+ /* Remote port fixed attributes */
+ .show_rport_maxframe_size = 1,
+ .show_rport_supported_classes = 1,
+ .show_rport_dev_loss_tmo = 1,
+ .get_rport_dev_loss_tmo = bfad_im_get_rport_loss_tmo,
+ .set_rport_dev_loss_tmo = bfad_im_set_rport_loss_tmo,
+};
+
+/**
+ * Scsi_Host_attrs SCSI host attributes
+ */
+static ssize_t
+bfad_im_serial_num_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ioc_attr.adapter_attr.serial_num);
+}
+
+static ssize_t
+bfad_im_model_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+ return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.model);
+}
+
+static ssize_t
+bfad_im_model_desc_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ioc_attr.adapter_attr.model_descr);
+}
+
+static ssize_t
+bfad_im_node_name_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_port_s *port = im_port->port;
+ u64 nwwn;
+
+ nwwn = bfa_fcs_port_get_nwwn(port->fcs_port);
+ return snprintf(buf, PAGE_SIZE, "0x%llx\n", bfa_os_htonll(nwwn));
+}
+
+static ssize_t
+bfad_im_symbolic_name_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+
+ return snprintf(buf, PAGE_SIZE, "Brocade %s FV%s DV%s\n",
+ ioc_attr.adapter_attr.model,
+ ioc_attr.adapter_attr.fw_ver, BFAD_DRIVER_VERSION);
+}
+
+static ssize_t
+bfad_im_hw_version_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+ return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.hw_ver);
+}
+
+static ssize_t
+bfad_im_drv_version_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_VERSION);
+}
+
+static ssize_t
+bfad_im_optionrom_version_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+ return snprintf(buf, PAGE_SIZE, "%s\n",
+ ioc_attr.adapter_attr.optrom_ver);
+}
+
+static ssize_t
+bfad_im_fw_version_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+ return snprintf(buf, PAGE_SIZE, "%s\n", ioc_attr.adapter_attr.fw_ver);
+}
+
+static ssize_t
+bfad_im_num_of_ports_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioc_attr_s ioc_attr;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+ return snprintf(buf, PAGE_SIZE, "%d\n", ioc_attr.adapter_attr.nports);
+}
+
+static ssize_t
+bfad_im_drv_name_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", BFAD_DRIVER_NAME);
+}
+
+static ssize_t
+bfad_im_num_of_discovered_ports_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_port_s *port = im_port->port;
+ struct bfad_s *bfad = im_port->bfad;
+ int nrports = 2048;
+ wwn_t *rports = NULL;
+ unsigned long flags;
+
+ rports = kzalloc(sizeof(wwn_t) * nrports , GFP_ATOMIC);
+ if (rports == NULL)
+ return -ENOMEM;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_fcs_port_get_rports(port->fcs_port, rports, &nrports);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ kfree(rports);
+
+ return snprintf(buf, PAGE_SIZE, "%d\n", nrports);
+}
+
+static DEVICE_ATTR(serial_number, S_IRUGO,
+ bfad_im_serial_num_show, NULL);
+static DEVICE_ATTR(model, S_IRUGO, bfad_im_model_show, NULL);
+static DEVICE_ATTR(model_description, S_IRUGO,
+ bfad_im_model_desc_show, NULL);
+static DEVICE_ATTR(node_name, S_IRUGO, bfad_im_node_name_show, NULL);
+static DEVICE_ATTR(symbolic_name, S_IRUGO,
+ bfad_im_symbolic_name_show, NULL);
+static DEVICE_ATTR(hardware_version, S_IRUGO,
+ bfad_im_hw_version_show, NULL);
+static DEVICE_ATTR(driver_version, S_IRUGO,
+ bfad_im_drv_version_show, NULL);
+static DEVICE_ATTR(option_rom_version, S_IRUGO,
+ bfad_im_optionrom_version_show, NULL);
+static DEVICE_ATTR(firmware_version, S_IRUGO,
+ bfad_im_fw_version_show, NULL);
+static DEVICE_ATTR(number_of_ports, S_IRUGO,
+ bfad_im_num_of_ports_show, NULL);
+static DEVICE_ATTR(driver_name, S_IRUGO, bfad_im_drv_name_show, NULL);
+static DEVICE_ATTR(number_of_discovered_ports, S_IRUGO,
+ bfad_im_num_of_discovered_ports_show, NULL);
+
+struct device_attribute *bfad_im_host_attrs[] = {
+ &dev_attr_serial_number,
+ &dev_attr_model,
+ &dev_attr_model_description,
+ &dev_attr_node_name,
+ &dev_attr_symbolic_name,
+ &dev_attr_hardware_version,
+ &dev_attr_driver_version,
+ &dev_attr_option_rom_version,
+ &dev_attr_firmware_version,
+ &dev_attr_number_of_ports,
+ &dev_attr_driver_name,
+ &dev_attr_number_of_discovered_ports,
+ NULL,
+};
+
+struct device_attribute *bfad_im_vport_attrs[] = {
+ &dev_attr_serial_number,
+ &dev_attr_model,
+ &dev_attr_model_description,
+ &dev_attr_node_name,
+ &dev_attr_symbolic_name,
+ &dev_attr_hardware_version,
+ &dev_attr_driver_version,
+ &dev_attr_option_rom_version,
+ &dev_attr_firmware_version,
+ &dev_attr_number_of_ports,
+ &dev_attr_driver_name,
+ &dev_attr_number_of_discovered_ports,
+ NULL,
+};
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFAD_ATTR_H__
+#define __BFAD_ATTR_H__
+/**
+ * bfad_attr.h VMware driver configuration interface module.
+ */
+
+/**
+ * FC_transport_template FC transport template
+ */
+
+struct Scsi_Host*
+bfad_os_dev_to_shost(struct scsi_target *starget);
+
+/**
+ * FC transport template entry, get SCSI target port ID.
+ */
+void
+bfad_im_get_starget_port_id(struct scsi_target *starget);
+
+/**
+ * FC transport template entry, get SCSI target nwwn.
+ */
+void
+bfad_im_get_starget_node_name(struct scsi_target *starget);
+
+/**
+ * FC transport template entry, get SCSI target pwwn.
+ */
+void
+bfad_im_get_starget_port_name(struct scsi_target *starget);
+
+/**
+ * FC transport template entry, get SCSI host port ID.
+ */
+void
+bfad_im_get_host_port_id(struct Scsi_Host *shost);
+
+/**
+ * FC transport template entry, issue a LIP.
+ */
+int
+bfad_im_issue_fc_host_lip(struct Scsi_Host *shost);
+
+struct Scsi_Host*
+bfad_os_starget_to_shost(struct scsi_target *starget);
+
+
+#endif /* __BFAD_ATTR_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * Contains base driver definitions.
+ */
+
+/**
+ * bfa_drv.h Linux driver data structures.
+ */
+
+#ifndef __BFAD_DRV_H__
+#define __BFAD_DRV_H__
+
+#include "bfa_os_inc.h"
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs.h>
+#include <defs/bfa_defs_pci.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_rport.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <defs/bfa_defs_vport.h>
+#include <fcs/bfa_fcs_vport.h>
+
+#include <cs/bfa_plog.h>
+#include "aen/bfa_aen.h"
+#include <log/bfa_log_linux.h>
+
+#define BFAD_DRIVER_NAME "bfa"
+#ifdef BFA_DRIVER_VERSION
+#define BFAD_DRIVER_VERSION BFA_DRIVER_VERSION
+#else
+#define BFAD_DRIVER_VERSION "2.0.0.0"
+#endif
+
+
+#define BFAD_IRQ_FLAGS IRQF_SHARED
+
+/*
+ * BFAD flags
+ */
+#define BFAD_MSIX_ON 0x00000001
+#define BFAD_HAL_INIT_DONE 0x00000002
+#define BFAD_DRV_INIT_DONE 0x00000004
+#define BFAD_CFG_PPORT_DONE 0x00000008
+#define BFAD_HAL_START_DONE 0x00000010
+#define BFAD_PORT_ONLINE 0x00000020
+#define BFAD_RPORT_ONLINE 0x00000040
+
+#define BFAD_PORT_DELETE 0x00000001
+
+/*
+ * BFAD related definition
+ */
+#define SCSI_SCAN_DELAY HZ
+#define BFAD_STOP_TIMEOUT 30
+#define BFAD_SUSPEND_TIMEOUT BFAD_STOP_TIMEOUT
+
+/*
+ * BFAD configuration parameter default values
+ */
+#define BFAD_LUN_QUEUE_DEPTH 32
+#define BFAD_IO_MAX_SGE SG_ALL
+
+#define bfad_isr_t irq_handler_t
+
+#define MAX_MSIX_ENTRY 22
+
+struct bfad_msix_s {
+ struct bfad_s *bfad;
+ struct msix_entry msix;
+};
+
+enum bfad_port_pvb_type {
+ BFAD_PORT_PHYS_BASE = 0,
+ BFAD_PORT_PHYS_VPORT = 1,
+ BFAD_PORT_VF_BASE = 2,
+ BFAD_PORT_VF_VPORT = 3,
+};
+
+/*
+ * PORT data structure
+ */
+struct bfad_port_s {
+ struct list_head list_entry;
+ struct bfad_s *bfad;
+ struct bfa_fcs_port_s *fcs_port;
+ u32 roles;
+ s32 flags;
+ u32 supported_fc4s;
+ u8 ipfc_flags;
+ enum bfad_port_pvb_type pvb_type;
+ struct bfad_im_port_s *im_port; /* IM specific data */
+ struct bfad_tm_port_s *tm_port; /* TM specific data */
+ struct bfad_ipfc_port_s *ipfc_port; /* IPFC specific data */
+};
+
+/*
+ * VPORT data structure
+ */
+struct bfad_vport_s {
+ struct bfad_port_s drv_port;
+ struct bfa_fcs_vport_s fcs_vport;
+ struct completion *comp_del;
+};
+
+/*
+ * VF data structure
+ */
+struct bfad_vf_s {
+ bfa_fcs_vf_t fcs_vf;
+ struct bfad_port_s base_port; /* base port for vf */
+ struct bfad_s *bfad;
+};
+
+struct bfad_cfg_param_s {
+ u32 rport_del_timeout;
+ u32 ioc_queue_depth;
+ u32 lun_queue_depth;
+ u32 io_max_sge;
+ u32 binding_method;
+};
+
+#define BFAD_AEN_MAX_APPS 8
+struct bfad_aen_file_s {
+ struct list_head qe;
+ struct bfad_s *bfad;
+ s32 ri;
+ s32 app_id;
+};
+
+/*
+ * BFAD (PCI function) data structure
+ */
+struct bfad_s {
+ struct list_head list_entry;
+ struct bfa_s bfa;
+ struct bfa_fcs_s bfa_fcs;
+ struct pci_dev *pcidev;
+ const char *pci_name;
+ struct bfa_pcidev_s hal_pcidev;
+ struct bfa_ioc_pci_attr_s pci_attr;
+ unsigned long pci_bar0_map;
+ void __iomem *pci_bar0_kva;
+ struct completion comp;
+ struct completion suspend;
+ struct completion disable_comp;
+ bfa_boolean_t disable_active;
+ struct bfad_port_s pport; /* physical port of the BFAD */
+ struct bfa_meminfo_s meminfo;
+ struct bfa_iocfc_cfg_s ioc_cfg;
+ u32 inst_no; /* BFAD instance number */
+ u32 bfad_flags;
+ spinlock_t bfad_lock;
+ struct bfad_cfg_param_s cfg_data;
+ struct bfad_msix_s msix_tab[MAX_MSIX_ENTRY];
+ int nvec;
+ char adapter_name[BFA_ADAPTER_SYM_NAME_LEN];
+ char port_name[BFA_ADAPTER_SYM_NAME_LEN];
+ struct timer_list hal_tmo;
+ unsigned long hs_start;
+ struct bfad_im_s *im; /* IM specific data */
+ struct bfad_tm_s *tm; /* TM specific data */
+ struct bfad_ipfc_s *ipfc; /* IPFC specific data */
+ struct bfa_log_mod_s log_data;
+ struct bfa_trc_mod_s *trcmod;
+ struct bfa_log_mod_s *logmod;
+ struct bfa_aen_s *aen;
+ struct bfa_aen_s aen_buf;
+ struct bfad_aen_file_s file_buf[BFAD_AEN_MAX_APPS];
+ struct list_head file_q;
+ struct list_head file_free_q;
+ struct bfa_plog_s plog_buf;
+ int ref_count;
+ bfa_boolean_t ipfc_enabled;
+ struct fc_host_statistics link_stats;
+
+ struct kobject *bfa_kobj;
+ struct kobject *ioc_kobj;
+ struct kobject *pport_kobj;
+ struct kobject *lport_kobj;
+};
+
+/*
+ * RPORT data structure
+ */
+struct bfad_rport_s {
+ struct bfa_fcs_rport_s fcs_rport;
+};
+
+struct bfad_buf_info {
+ void *virt;
+ dma_addr_t phys;
+ u32 size;
+};
+
+struct bfad_fcxp {
+ struct bfad_port_s *port;
+ struct bfa_rport_s *bfa_rport;
+ bfa_status_t req_status;
+ u16 tag;
+ u16 rsp_len;
+ u16 rsp_maxlen;
+ u8 use_ireqbuf;
+ u8 use_irspbuf;
+ u32 num_req_sgles;
+ u32 num_rsp_sgles;
+ struct fchs_s fchs;
+ void *reqbuf_info;
+ void *rspbuf_info;
+ struct bfa_sge_s *req_sge;
+ struct bfa_sge_s *rsp_sge;
+ fcxp_send_cb_t send_cbfn;
+ void *send_cbarg;
+ void *bfa_fcxp;
+ struct completion comp;
+};
+
+struct bfad_hal_comp {
+ bfa_status_t status;
+ struct completion comp;
+};
+
+/*
+ * Macro to obtain the immediate lower power
+ * of two for the integer.
+ */
+#define nextLowerInt(x) \
+do { \
+ int j; \
+ (*x)--; \
+ for (j = 1; j < (sizeof(int) * 8); j <<= 1) \
+ (*x) = (*x) | (*x) >> j; \
+ (*x)++; \
+ (*x) = (*x) >> 1; \
+} while (0)
+
+
+bfa_status_t bfad_vport_create(struct bfad_s *bfad, u16 vf_id,
+ struct bfa_port_cfg_s *port_cfg);
+bfa_status_t bfad_vf_create(struct bfad_s *bfad, u16 vf_id,
+ struct bfa_port_cfg_s *port_cfg);
+bfa_status_t bfad_cfg_pport(struct bfad_s *bfad, enum bfa_port_role role);
+bfa_status_t bfad_drv_init(struct bfad_s *bfad);
+void bfad_drv_start(struct bfad_s *bfad);
+void bfad_uncfg_pport(struct bfad_s *bfad);
+void bfad_drv_stop(struct bfad_s *bfad);
+void bfad_remove_intr(struct bfad_s *bfad);
+void bfad_hal_mem_release(struct bfad_s *bfad);
+void bfad_hcb_comp(void *arg, bfa_status_t status);
+
+int bfad_setup_intr(struct bfad_s *bfad);
+void bfad_remove_intr(struct bfad_s *bfad);
+
+void bfad_update_hal_cfg(struct bfa_iocfc_cfg_s *bfa_cfg);
+bfa_status_t bfad_hal_mem_alloc(struct bfad_s *bfad);
+void bfad_bfa_tmo(unsigned long data);
+void bfad_init_timer(struct bfad_s *bfad);
+int bfad_pci_init(struct pci_dev *pdev, struct bfad_s *bfad);
+void bfad_pci_uninit(struct pci_dev *pdev, struct bfad_s *bfad);
+void bfad_fcs_port_cfg(struct bfad_s *bfad);
+void bfad_drv_uninit(struct bfad_s *bfad);
+void bfad_drv_log_level_set(struct bfad_s *bfad);
+bfa_status_t bfad_fc4_module_init(void);
+void bfad_fc4_module_exit(void);
+
+void bfad_pci_remove(struct pci_dev *pdev);
+int bfad_pci_probe(struct pci_dev *pdev, const struct pci_device_id *pid);
+void bfad_os_rport_online_wait(struct bfad_s *bfad);
+int bfad_os_get_linkup_delay(struct bfad_s *bfad);
+int bfad_install_msix_handler(struct bfad_s *bfad);
+
+extern struct idr bfad_im_port_index;
+extern struct list_head bfad_list;
+extern int bfa_lun_queue_depth;
+extern int bfad_supported_fc4s;
+extern int bfa_linkup_delay;
+
+#endif /* __BFAD_DRV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfad_fwimg.c Linux driver PCI interface module.
+ */
+#include <bfa_os_inc.h>
+#include <bfad_drv.h>
+#include <bfad_im_compat.h>
+#include <defs/bfa_defs_version.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <asm/uaccess.h>
+#include <asm/fcntl.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include <bfa_fwimg_priv.h>
+#include <bfa.h>
+
+u32 bfi_image_ct_size;
+u32 bfi_image_cb_size;
+u32 *bfi_image_ct;
+u32 *bfi_image_cb;
+
+
+#define BFAD_FW_FILE_CT "ctfw.bin"
+#define BFAD_FW_FILE_CB "cbfw.bin"
+
+u32 *
+bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
+ u32 *bfi_image_size, char *fw_name)
+{
+ const struct firmware *fw;
+
+ if (request_firmware(&fw, fw_name, &pdev->dev)) {
+ printk(KERN_ALERT "Can't locate firmware %s\n", fw_name);
+ goto error;
+ }
+
+ *bfi_image = vmalloc(fw->size);
+ if (NULL == *bfi_image) {
+ printk(KERN_ALERT "Fail to allocate buffer for fw image "
+ "size=%x!\n", (u32) fw->size);
+ goto error;
+ }
+
+ memcpy(*bfi_image, fw->data, fw->size);
+ *bfi_image_size = fw->size/sizeof(u32);
+
+ return(*bfi_image);
+
+error:
+ return(NULL);
+}
+
+u32 *
+bfad_get_firmware_buf(struct pci_dev *pdev)
+{
+ if (pdev->device == BFA_PCI_DEVICE_ID_CT) {
+ if (bfi_image_ct_size == 0)
+ bfad_read_firmware(pdev, &bfi_image_ct,
+ &bfi_image_ct_size, BFAD_FW_FILE_CT);
+ return(bfi_image_ct);
+ } else {
+ if (bfi_image_cb_size == 0)
+ bfad_read_firmware(pdev, &bfi_image_cb,
+ &bfi_image_cb_size, BFAD_FW_FILE_CB);
+ return(bfi_image_cb);
+ }
+}
+
+u32 *
+bfi_image_ct_get_chunk(u32 off)
+{ return (u32 *)(bfi_image_ct + off); }
+
+u32 *
+bfi_image_cb_get_chunk(u32 off)
+{ return (u32 *)(bfi_image_cb + off); }
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfad_im.c Linux driver IM module.
+ */
+
+#include "bfad_drv.h"
+#include "bfad_im.h"
+#include "bfad_trcmod.h"
+#include "bfa_cb_ioim_macros.h"
+#include <fcb/bfa_fcb_fcpim.h>
+
+BFA_TRC_FILE(LDRV, IM);
+
+DEFINE_IDR(bfad_im_port_index);
+struct scsi_transport_template *bfad_im_scsi_transport_template;
+static void bfad_im_itnim_work_handler(struct work_struct *work);
+static int bfad_im_queuecommand(struct scsi_cmnd *cmnd,
+ void (*done)(struct scsi_cmnd *));
+static int bfad_im_slave_alloc(struct scsi_device *sdev);
+
+void
+bfa_cb_ioim_done(void *drv, struct bfad_ioim_s *dio,
+ enum bfi_ioim_status io_status, u8 scsi_status,
+ int sns_len, u8 *sns_info, s32 residue)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+ struct bfad_s *bfad = drv;
+ struct bfad_itnim_data_s *itnim_data;
+ struct bfad_itnim_s *itnim;
+
+ switch (io_status) {
+ case BFI_IOIM_STS_OK:
+ bfa_trc(bfad, scsi_status);
+ cmnd->result = ScsiResult(DID_OK, scsi_status);
+ scsi_set_resid(cmnd, 0);
+
+ if (sns_len > 0) {
+ bfa_trc(bfad, sns_len);
+ if (sns_len > SCSI_SENSE_BUFFERSIZE)
+ sns_len = SCSI_SENSE_BUFFERSIZE;
+ memcpy(cmnd->sense_buffer, sns_info, sns_len);
+ }
+ if (residue > 0)
+ scsi_set_resid(cmnd, residue);
+ break;
+
+ case BFI_IOIM_STS_ABORTED:
+ case BFI_IOIM_STS_TIMEDOUT:
+ case BFI_IOIM_STS_PATHTOV:
+ default:
+ cmnd->result = ScsiResult(DID_ERROR, 0);
+ }
+
+ /* Unmap DMA, if host is NULL, it means a scsi passthru cmd */
+ if (cmnd->device->host != NULL)
+ scsi_dma_unmap(cmnd);
+
+ cmnd->host_scribble = NULL;
+ bfa_trc(bfad, cmnd->result);
+
+ itnim_data = cmnd->device->hostdata;
+ if (itnim_data) {
+ itnim = itnim_data->itnim;
+ if (!cmnd->result && itnim &&
+ (bfa_lun_queue_depth > cmnd->device->queue_depth)) {
+ /* Queue depth adjustment for good status completion */
+ bfad_os_ramp_up_qdepth(itnim, cmnd->device);
+ } else if (cmnd->result == SAM_STAT_TASK_SET_FULL && itnim) {
+ /* qfull handling */
+ bfad_os_handle_qfull(itnim, cmnd->device);
+ }
+ }
+
+ cmnd->scsi_done(cmnd);
+}
+
+void
+bfa_cb_ioim_good_comp(void *drv, struct bfad_ioim_s *dio)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+ struct bfad_itnim_data_s *itnim_data;
+ struct bfad_itnim_s *itnim;
+
+ cmnd->result = ScsiResult(DID_OK, SCSI_STATUS_GOOD);
+
+ /* Unmap DMA, if host is NULL, it means a scsi passthru cmd */
+ if (cmnd->device->host != NULL)
+ scsi_dma_unmap(cmnd);
+
+ cmnd->host_scribble = NULL;
+
+ /* Queue depth adjustment */
+ if (bfa_lun_queue_depth > cmnd->device->queue_depth) {
+ itnim_data = cmnd->device->hostdata;
+ if (itnim_data) {
+ itnim = itnim_data->itnim;
+ if (itnim)
+ bfad_os_ramp_up_qdepth(itnim, cmnd->device);
+ }
+ }
+
+ cmnd->scsi_done(cmnd);
+}
+
+void
+bfa_cb_ioim_abort(void *drv, struct bfad_ioim_s *dio)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dio;
+ struct bfad_s *bfad = drv;
+
+ cmnd->result = ScsiResult(DID_ERROR, 0);
+
+ /* Unmap DMA, if host is NULL, it means a scsi passthru cmd */
+ if (cmnd->device->host != NULL)
+ scsi_dma_unmap(cmnd);
+
+ bfa_trc(bfad, cmnd->result);
+ cmnd->host_scribble = NULL;
+}
+
+void
+bfa_cb_tskim_done(void *bfad, struct bfad_tskim_s *dtsk,
+ enum bfi_tskim_status tsk_status)
+{
+ struct scsi_cmnd *cmnd = (struct scsi_cmnd *)dtsk;
+ wait_queue_head_t *wq;
+
+ cmnd->SCp.Status |= tsk_status << 1;
+ set_bit(IO_DONE_BIT, (unsigned long *)&cmnd->SCp.Status);
+ wq = (wait_queue_head_t *) cmnd->SCp.ptr;
+ cmnd->SCp.ptr = NULL;
+
+ if (wq)
+ wake_up(wq);
+}
+
+void
+bfa_cb_ioim_resfree(void *drv)
+{
+}
+
+/**
+ * Scsi_Host_template SCSI host template
+ */
+/**
+ * Scsi_Host template entry, returns BFAD PCI info.
+ */
+static const char *
+bfad_im_info(struct Scsi_Host *shost)
+{
+ static char bfa_buf[256];
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfa_ioc_attr_s ioc_attr;
+ struct bfad_s *bfad = im_port->bfad;
+
+ memset(&ioc_attr, 0, sizeof(ioc_attr));
+ bfa_get_attr(&bfad->bfa, &ioc_attr);
+
+ memset(bfa_buf, 0, sizeof(bfa_buf));
+ snprintf(bfa_buf, sizeof(bfa_buf),
+ "Brocade FC/FCOE Adapter, " "model: %s hwpath: %s driver: %s",
+ ioc_attr.adapter_attr.model, bfad->pci_name,
+ BFAD_DRIVER_VERSION);
+ return bfa_buf;
+}
+
+/**
+ * Scsi_Host template entry, aborts the specified SCSI command.
+ *
+ * Returns: SUCCESS or FAILED.
+ */
+static int
+bfad_im_abort_handler(struct scsi_cmnd *cmnd)
+{
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_ioim_s *hal_io;
+ unsigned long flags;
+ u32 timeout;
+ int rc = FAILED;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ hal_io = (struct bfa_ioim_s *) cmnd->host_scribble;
+ if (!hal_io) {
+ /* IO has been completed, retrun success */
+ rc = SUCCESS;
+ goto out;
+ }
+ if (hal_io->dio != (struct bfad_ioim_s *) cmnd) {
+ rc = FAILED;
+ goto out;
+ }
+
+ bfa_trc(bfad, hal_io->iotag);
+ bfa_log(bfad->logmod, BFA_LOG_LINUX_SCSI_ABORT,
+ im_port->shost->host_no, cmnd, hal_io->iotag);
+ bfa_ioim_abort(hal_io);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ /* Need to wait until the command get aborted */
+ timeout = 10;
+ while ((struct bfa_ioim_s *) cmnd->host_scribble == hal_io) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(timeout);
+ if (timeout < 4 * HZ)
+ timeout *= 2;
+ }
+
+ cmnd->scsi_done(cmnd);
+ bfa_trc(bfad, hal_io->iotag);
+ bfa_log(bfad->logmod, BFA_LOG_LINUX_SCSI_ABORT_COMP,
+ im_port->shost->host_no, cmnd, hal_io->iotag);
+ return SUCCESS;
+out:
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ return rc;
+}
+
+static bfa_status_t
+bfad_im_target_reset_send(struct bfad_s *bfad, struct scsi_cmnd *cmnd,
+ struct bfad_itnim_s *itnim)
+{
+ struct bfa_tskim_s *tskim;
+ struct bfa_itnim_s *bfa_itnim;
+ bfa_status_t rc = BFA_STATUS_OK;
+
+ bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
+ tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd);
+ if (!tskim) {
+ BFA_DEV_PRINTF(bfad, BFA_ERR,
+ "target reset, fail to allocate tskim\n");
+ rc = BFA_STATUS_FAILED;
+ goto out;
+ }
+
+ /*
+ * Set host_scribble to NULL to avoid aborting a task command if
+ * happens.
+ */
+ cmnd->host_scribble = NULL;
+ cmnd->SCp.Status = 0;
+ bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
+ bfa_tskim_start(tskim, bfa_itnim, (lun_t)0,
+ FCP_TM_TARGET_RESET, BFAD_TARGET_RESET_TMO);
+out:
+ return rc;
+}
+
+/**
+ * Scsi_Host template entry, resets a LUN and abort its all commands.
+ *
+ * Returns: SUCCESS or FAILED.
+ *
+ */
+static int
+bfad_im_reset_lun_handler(struct scsi_cmnd *cmnd)
+{
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_itnim_data_s *itnim_data = cmnd->device->hostdata;
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfa_tskim_s *tskim;
+ struct bfad_itnim_s *itnim;
+ struct bfa_itnim_s *bfa_itnim;
+ DECLARE_WAIT_QUEUE_HEAD(wq);
+ int rc = SUCCESS;
+ unsigned long flags;
+ enum bfi_tskim_status task_status;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ itnim = itnim_data->itnim;
+ if (!itnim) {
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ rc = FAILED;
+ goto out;
+ }
+
+ tskim = bfa_tskim_alloc(&bfad->bfa, (struct bfad_tskim_s *) cmnd);
+ if (!tskim) {
+ BFA_DEV_PRINTF(bfad, BFA_ERR,
+ "LUN reset, fail to allocate tskim");
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ rc = FAILED;
+ goto out;
+ }
+
+ /**
+ * Set host_scribble to NULL to avoid aborting a task command
+ * if happens.
+ */
+ cmnd->host_scribble = NULL;
+ cmnd->SCp.ptr = (char *)&wq;
+ cmnd->SCp.Status = 0;
+ bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim->fcs_itnim);
+ bfa_tskim_start(tskim, bfa_itnim,
+ bfad_int_to_lun(cmnd->device->lun),
+ FCP_TM_LUN_RESET, BFAD_LUN_RESET_TMO);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ wait_event(wq, test_bit(IO_DONE_BIT,
+ (unsigned long *)&cmnd->SCp.Status));
+
+ task_status = cmnd->SCp.Status >> 1;
+ if (task_status != BFI_TSKIM_STS_OK) {
+ BFA_DEV_PRINTF(bfad, BFA_ERR, "LUN reset failure, status: %d\n",
+ task_status);
+ rc = FAILED;
+ }
+
+out:
+ return rc;
+}
+
+/**
+ * Scsi_Host template entry, resets the bus and abort all commands.
+ */
+static int
+bfad_im_reset_bus_handler(struct scsi_cmnd *cmnd)
+{
+ struct Scsi_Host *shost = cmnd->device->host;
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) shost->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfad_itnim_s *itnim;
+ unsigned long flags;
+ u32 i, rc, err_cnt = 0;
+ DECLARE_WAIT_QUEUE_HEAD(wq);
+ enum bfi_tskim_status task_status;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ for (i = 0; i < MAX_FCP_TARGET; i++) {
+ itnim = bfad_os_get_itnim(im_port, i);
+ if (itnim) {
+ cmnd->SCp.ptr = (char *)&wq;
+ rc = bfad_im_target_reset_send(bfad, cmnd, itnim);
+ if (rc != BFA_STATUS_OK) {
+ err_cnt++;
+ continue;
+ }
+
+ /* wait target reset to complete */
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ wait_event(wq, test_bit(IO_DONE_BIT,
+ (unsigned long *)&cmnd->SCp.Status));
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+ task_status = cmnd->SCp.Status >> 1;
+ if (task_status != BFI_TSKIM_STS_OK) {
+ BFA_DEV_PRINTF(bfad, BFA_ERR,
+ "target reset failure,"
+ " status: %d\n", task_status);
+ err_cnt++;
+ }
+ }
+ }
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ if (err_cnt)
+ return FAILED;
+
+ return SUCCESS;
+}
+
+/**
+ * Scsi_Host template entry slave_destroy.
+ */
+static void
+bfad_im_slave_destroy(struct scsi_device *sdev)
+{
+ sdev->hostdata = NULL;
+ return;
+}
+
+/**
+ * BFA FCS itnim callbacks
+ */
+
+/**
+ * BFA FCS itnim alloc callback, after successful PRLI
+ * Context: Interrupt
+ */
+void
+bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
+ struct bfad_itnim_s **itnim_drv)
+{
+ *itnim_drv = kzalloc(sizeof(struct bfad_itnim_s), GFP_ATOMIC);
+ if (*itnim_drv == NULL)
+ return;
+
+ (*itnim_drv)->im = bfad->im;
+ *itnim = &(*itnim_drv)->fcs_itnim;
+ (*itnim_drv)->state = ITNIM_STATE_NONE;
+
+ /*
+ * Initiaze the itnim_work
+ */
+ INIT_WORK(&(*itnim_drv)->itnim_work, bfad_im_itnim_work_handler);
+ bfad->bfad_flags |= BFAD_RPORT_ONLINE;
+}
+
+/**
+ * BFA FCS itnim free callback.
+ * Context: Interrupt. bfad_lock is held
+ */
+void
+bfa_fcb_itnim_free(struct bfad_s *bfad, struct bfad_itnim_s *itnim_drv)
+{
+ struct bfad_port_s *port;
+ wwn_t wwpn;
+ u32 fcid;
+ char wwpn_str[32], fcid_str[16];
+
+ /* online to free state transtion should not happen */
+ bfa_assert(itnim_drv->state != ITNIM_STATE_ONLINE);
+
+ itnim_drv->queue_work = 1;
+ /* offline request is not yet done, use the same request to free */
+ if (itnim_drv->state == ITNIM_STATE_OFFLINE_PENDING)
+ itnim_drv->queue_work = 0;
+
+ itnim_drv->state = ITNIM_STATE_FREE;
+ port = bfa_fcs_itnim_get_drvport(&itnim_drv->fcs_itnim);
+ itnim_drv->im_port = port->im_port;
+ wwpn = bfa_fcs_itnim_get_pwwn(&itnim_drv->fcs_itnim);
+ fcid = bfa_fcs_itnim_get_fcid(&itnim_drv->fcs_itnim);
+ wwn2str(wwpn_str, wwpn);
+ fcid2str(fcid_str, fcid);
+ bfa_log(bfad->logmod, BFA_LOG_LINUX_ITNIM_FREE,
+ port->im_port->shost->host_no,
+ fcid_str, wwpn_str);
+ bfad_os_itnim_process(itnim_drv);
+}
+
+/**
+ * BFA FCS itnim online callback.
+ * Context: Interrupt. bfad_lock is held
+ */
+void
+bfa_fcb_itnim_online(struct bfad_itnim_s *itnim_drv)
+{
+ struct bfad_port_s *port;
+
+ itnim_drv->bfa_itnim = bfa_fcs_itnim_get_halitn(&itnim_drv->fcs_itnim);
+ port = bfa_fcs_itnim_get_drvport(&itnim_drv->fcs_itnim);
+ itnim_drv->state = ITNIM_STATE_ONLINE;
+ itnim_drv->queue_work = 1;
+ itnim_drv->im_port = port->im_port;
+ bfad_os_itnim_process(itnim_drv);
+}
+
+/**
+ * BFA FCS itnim offline callback.
+ * Context: Interrupt. bfad_lock is held
+ */
+void
+bfa_fcb_itnim_offline(struct bfad_itnim_s *itnim_drv)
+{
+ struct bfad_port_s *port;
+ struct bfad_s *bfad;
+
+ port = bfa_fcs_itnim_get_drvport(&itnim_drv->fcs_itnim);
+ bfad = port->bfad;
+ if ((bfad->pport.flags & BFAD_PORT_DELETE) ||
+ (port->flags & BFAD_PORT_DELETE)) {
+ itnim_drv->state = ITNIM_STATE_OFFLINE;
+ return;
+ }
+ itnim_drv->im_port = port->im_port;
+ itnim_drv->state = ITNIM_STATE_OFFLINE_PENDING;
+ itnim_drv->queue_work = 1;
+ bfad_os_itnim_process(itnim_drv);
+}
+
+/**
+ * BFA FCS itnim timeout callback.
+ * Context: Interrupt. bfad_lock is held
+ */
+void bfa_fcb_itnim_tov(struct bfad_itnim_s *itnim)
+{
+ itnim->state = ITNIM_STATE_TIMEOUT;
+}
+
+/**
+ * Path TOV processing begin notification -- dummy for linux
+ */
+void
+bfa_fcb_itnim_tov_begin(struct bfad_itnim_s *itnim)
+{
+}
+
+
+
+/**
+ * Allocate a Scsi_Host for a port.
+ */
+int
+bfad_im_scsi_host_alloc(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
+{
+ int error = 1;
+
+ if (!idr_pre_get(&bfad_im_port_index, GFP_KERNEL)) {
+ printk(KERN_WARNING "idr_pre_get failure\n");
+ goto out;
+ }
+
+ error = idr_get_new(&bfad_im_port_index, im_port,
+ &im_port->idr_id);
+ if (error) {
+ printk(KERN_WARNING "idr_get_new failure\n");
+ goto out;
+ }
+
+ im_port->shost = bfad_os_scsi_host_alloc(im_port, bfad);
+ if (!im_port->shost) {
+ error = 1;
+ goto out_free_idr;
+ }
+
+ im_port->shost->hostdata[0] = (unsigned long)im_port;
+ im_port->shost->unique_id = im_port->idr_id;
+ im_port->shost->this_id = -1;
+ im_port->shost->max_id = MAX_FCP_TARGET;
+ im_port->shost->max_lun = MAX_FCP_LUN;
+ im_port->shost->max_cmd_len = 16;
+ im_port->shost->can_queue = bfad->cfg_data.ioc_queue_depth;
+ im_port->shost->transportt = bfad_im_scsi_transport_template;
+
+ error = bfad_os_scsi_add_host(im_port->shost, im_port, bfad);
+ if (error) {
+ printk(KERN_WARNING "bfad_os_scsi_add_host failure %d\n",
+ error);
+ goto out_fc_rel;
+ }
+
+ /* setup host fixed attribute if the lk supports */
+ bfad_os_fc_host_init(im_port);
+
+ return 0;
+
+out_fc_rel:
+ scsi_host_put(im_port->shost);
+out_free_idr:
+ idr_remove(&bfad_im_port_index, im_port->idr_id);
+out:
+ return error;
+}
+
+void
+bfad_im_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
+{
+ unsigned long flags;
+
+ bfa_trc(bfad, bfad->inst_no);
+ bfa_log(bfad->logmod, BFA_LOG_LINUX_SCSI_HOST_FREE,
+ im_port->shost->host_no);
+
+ fc_remove_host(im_port->shost);
+
+ scsi_remove_host(im_port->shost);
+ scsi_host_put(im_port->shost);
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ idr_remove(&bfad_im_port_index, im_port->idr_id);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+static void
+bfad_im_port_delete_handler(struct work_struct *work)
+{
+ struct bfad_im_port_s *im_port =
+ container_of(work, struct bfad_im_port_s, port_delete_work);
+
+ bfad_im_scsi_host_free(im_port->bfad, im_port);
+ bfad_im_port_clean(im_port);
+ kfree(im_port);
+}
+
+bfa_status_t
+bfad_im_port_new(struct bfad_s *bfad, struct bfad_port_s *port)
+{
+ int rc = BFA_STATUS_OK;
+ struct bfad_im_port_s *im_port;
+
+ im_port = kzalloc(sizeof(struct bfad_im_port_s), GFP_ATOMIC);
+ if (im_port == NULL) {
+ rc = BFA_STATUS_ENOMEM;
+ goto ext;
+ }
+ port->im_port = im_port;
+ im_port->port = port;
+ im_port->bfad = bfad;
+
+ INIT_WORK(&im_port->port_delete_work, bfad_im_port_delete_handler);
+ INIT_LIST_HEAD(&im_port->itnim_mapped_list);
+ INIT_LIST_HEAD(&im_port->binding_list);
+
+ext:
+ return rc;
+}
+
+void
+bfad_im_port_delete(struct bfad_s *bfad, struct bfad_port_s *port)
+{
+ struct bfad_im_port_s *im_port = port->im_port;
+
+ queue_work(bfad->im->drv_workq,
+ &im_port->port_delete_work);
+}
+
+void
+bfad_im_port_clean(struct bfad_im_port_s *im_port)
+{
+ struct bfad_fcp_binding *bp, *bp_new;
+ unsigned long flags;
+ struct bfad_s *bfad = im_port->bfad;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ list_for_each_entry_safe(bp, bp_new, &im_port->binding_list,
+ list_entry) {
+ list_del(&bp->list_entry);
+ kfree(bp);
+ }
+
+ /* the itnim_mapped_list must be empty at this time */
+ bfa_assert(list_empty(&im_port->itnim_mapped_list));
+
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+void
+bfad_im_port_online(struct bfad_s *bfad, struct bfad_port_s *port)
+{
+}
+
+void
+bfad_im_port_offline(struct bfad_s *bfad, struct bfad_port_s *port)
+{
+}
+
+bfa_status_t
+bfad_im_probe(struct bfad_s *bfad)
+{
+ struct bfad_im_s *im;
+ bfa_status_t rc = BFA_STATUS_OK;
+
+ im = kzalloc(sizeof(struct bfad_im_s), GFP_KERNEL);
+ if (im == NULL) {
+ rc = BFA_STATUS_ENOMEM;
+ goto ext;
+ }
+
+ bfad->im = im;
+ im->bfad = bfad;
+
+ if (bfad_os_thread_workq(bfad) != BFA_STATUS_OK) {
+ kfree(im);
+ rc = BFA_STATUS_FAILED;
+ }
+
+ext:
+ return rc;
+}
+
+void
+bfad_im_probe_undo(struct bfad_s *bfad)
+{
+ if (bfad->im) {
+ bfad_os_destroy_workq(bfad->im);
+ kfree(bfad->im);
+ bfad->im = NULL;
+ }
+}
+
+
+
+
+int
+bfad_os_scsi_add_host(struct Scsi_Host *shost, struct bfad_im_port_s *im_port,
+ struct bfad_s *bfad)
+{
+ struct device *dev;
+
+ if (im_port->port->pvb_type == BFAD_PORT_PHYS_BASE)
+ dev = &bfad->pcidev->dev;
+ else
+ dev = &bfad->pport.im_port->shost->shost_gendev;
+
+ return scsi_add_host(shost, dev);
+}
+
+struct Scsi_Host *
+bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port, struct bfad_s *bfad)
+{
+ struct scsi_host_template *sht;
+
+ if (im_port->port->pvb_type == BFAD_PORT_PHYS_BASE)
+ sht = &bfad_im_scsi_host_template;
+ else
+ sht = &bfad_im_vport_template;
+
+ sht->sg_tablesize = bfad->cfg_data.io_max_sge;
+
+ return scsi_host_alloc(sht, sizeof(unsigned long));
+}
+
+void
+bfad_os_scsi_host_free(struct bfad_s *bfad, struct bfad_im_port_s *im_port)
+{
+ flush_workqueue(bfad->im->drv_workq);
+ bfad_im_scsi_host_free(im_port->bfad, im_port);
+ bfad_im_port_clean(im_port);
+ kfree(im_port);
+}
+
+void
+bfad_os_destroy_workq(struct bfad_im_s *im)
+{
+ if (im && im->drv_workq) {
+ destroy_workqueue(im->drv_workq);
+ im->drv_workq = NULL;
+ }
+}
+
+bfa_status_t
+bfad_os_thread_workq(struct bfad_s *bfad)
+{
+ struct bfad_im_s *im = bfad->im;
+
+ bfa_trc(bfad, 0);
+ snprintf(im->drv_workq_name, BFAD_KOBJ_NAME_LEN, "bfad_wq_%d",
+ bfad->inst_no);
+ im->drv_workq = create_singlethread_workqueue(im->drv_workq_name);
+ if (!im->drv_workq)
+ return BFA_STATUS_FAILED;
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Scsi_Host template entry.
+ *
+ * Description:
+ * OS entry point to adjust the queue_depths on a per-device basis.
+ * Called once per device during the bus scan.
+ * Return non-zero if fails.
+ */
+static int
+bfad_im_slave_configure(struct scsi_device *sdev)
+{
+ if (sdev->tagged_supported)
+ scsi_activate_tcq(sdev, bfa_lun_queue_depth);
+ else
+ scsi_deactivate_tcq(sdev, bfa_lun_queue_depth);
+
+ return 0;
+}
+
+struct scsi_host_template bfad_im_scsi_host_template = {
+ .module = THIS_MODULE,
+ .name = BFAD_DRIVER_NAME,
+ .info = bfad_im_info,
+ .queuecommand = bfad_im_queuecommand,
+ .eh_abort_handler = bfad_im_abort_handler,
+ .eh_device_reset_handler = bfad_im_reset_lun_handler,
+ .eh_bus_reset_handler = bfad_im_reset_bus_handler,
+
+ .slave_alloc = bfad_im_slave_alloc,
+ .slave_configure = bfad_im_slave_configure,
+ .slave_destroy = bfad_im_slave_destroy,
+
+ .this_id = -1,
+ .sg_tablesize = BFAD_IO_MAX_SGE,
+ .cmd_per_lun = 3,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = bfad_im_host_attrs,
+ .max_sectors = 0xFFFF,
+};
+
+struct scsi_host_template bfad_im_vport_template = {
+ .module = THIS_MODULE,
+ .name = BFAD_DRIVER_NAME,
+ .info = bfad_im_info,
+ .queuecommand = bfad_im_queuecommand,
+ .eh_abort_handler = bfad_im_abort_handler,
+ .eh_device_reset_handler = bfad_im_reset_lun_handler,
+ .eh_bus_reset_handler = bfad_im_reset_bus_handler,
+
+ .slave_alloc = bfad_im_slave_alloc,
+ .slave_configure = bfad_im_slave_configure,
+ .slave_destroy = bfad_im_slave_destroy,
+
+ .this_id = -1,
+ .sg_tablesize = BFAD_IO_MAX_SGE,
+ .cmd_per_lun = 3,
+ .use_clustering = ENABLE_CLUSTERING,
+ .shost_attrs = bfad_im_vport_attrs,
+ .max_sectors = 0xFFFF,
+};
+
+void
+bfad_im_probe_post(struct bfad_im_s *im)
+{
+ flush_workqueue(im->drv_workq);
+}
+
+bfa_status_t
+bfad_im_module_init(void)
+{
+ bfad_im_scsi_transport_template =
+ fc_attach_transport(&bfad_im_fc_function_template);
+ if (!bfad_im_scsi_transport_template)
+ return BFA_STATUS_ENOMEM;
+
+ return BFA_STATUS_OK;
+}
+
+void
+bfad_im_module_exit(void)
+{
+ if (bfad_im_scsi_transport_template)
+ fc_release_transport(bfad_im_scsi_transport_template);
+}
+
+void
+bfad_os_itnim_process(struct bfad_itnim_s *itnim_drv)
+{
+ struct bfad_im_s *im = itnim_drv->im;
+
+ if (itnim_drv->queue_work)
+ queue_work(im->drv_workq, &itnim_drv->itnim_work);
+}
+
+void
+bfad_os_ramp_up_qdepth(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
+{
+ struct scsi_device *tmp_sdev;
+
+ if (((jiffies - itnim->last_ramp_up_time) >
+ BFA_QUEUE_FULL_RAMP_UP_TIME * HZ) &&
+ ((jiffies - itnim->last_queue_full_time) >
+ BFA_QUEUE_FULL_RAMP_UP_TIME * HZ)) {
+ shost_for_each_device(tmp_sdev, sdev->host) {
+ if (bfa_lun_queue_depth > tmp_sdev->queue_depth) {
+ if (tmp_sdev->id != sdev->id)
+ continue;
+ if (tmp_sdev->ordered_tags)
+ scsi_adjust_queue_depth(tmp_sdev,
+ MSG_ORDERED_TAG,
+ tmp_sdev->queue_depth + 1);
+ else
+ scsi_adjust_queue_depth(tmp_sdev,
+ MSG_SIMPLE_TAG,
+ tmp_sdev->queue_depth + 1);
+
+ itnim->last_ramp_up_time = jiffies;
+ }
+ }
+ }
+}
+
+void
+bfad_os_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev)
+{
+ struct scsi_device *tmp_sdev;
+
+ itnim->last_queue_full_time = jiffies;
+
+ shost_for_each_device(tmp_sdev, sdev->host) {
+ if (tmp_sdev->id != sdev->id)
+ continue;
+ scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1);
+ }
+}
+
+
+
+
+struct bfad_itnim_s *
+bfad_os_get_itnim(struct bfad_im_port_s *im_port, int id)
+{
+ struct bfad_itnim_s *itnim = NULL;
+
+ /* Search the mapped list for this target ID */
+ list_for_each_entry(itnim, &im_port->itnim_mapped_list, list_entry) {
+ if (id == itnim->scsi_tgt_id)
+ return itnim;
+ }
+
+ return NULL;
+}
+
+/**
+ * Scsi_Host template entry slave_alloc
+ */
+static int
+bfad_im_slave_alloc(struct scsi_device *sdev)
+{
+ struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+
+ if (!rport || fc_remote_port_chkready(rport))
+ return -ENXIO;
+
+ sdev->hostdata = rport->dd_data;
+
+ return 0;
+}
+
+void
+bfad_os_fc_host_init(struct bfad_im_port_s *im_port)
+{
+ struct Scsi_Host *host = im_port->shost;
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfad_port_s *port = im_port->port;
+ union attr {
+ struct bfa_pport_attr_s pattr;
+ struct bfa_ioc_attr_s ioc_attr;
+ } attr;
+
+ fc_host_node_name(host) =
+ bfa_os_htonll((bfa_fcs_port_get_nwwn(port->fcs_port)));
+ fc_host_port_name(host) =
+ bfa_os_htonll((bfa_fcs_port_get_pwwn(port->fcs_port)));
+
+ fc_host_supported_classes(host) = FC_COS_CLASS3;
+
+ memset(fc_host_supported_fc4s(host), 0,
+ sizeof(fc_host_supported_fc4s(host)));
+ if (bfad_supported_fc4s & (BFA_PORT_ROLE_FCP_IM | BFA_PORT_ROLE_FCP_TM))
+ /* For FCP type 0x08 */
+ fc_host_supported_fc4s(host)[2] = 1;
+ if (bfad_supported_fc4s | BFA_PORT_ROLE_FCP_IPFC)
+ /* For LLC/SNAP type 0x05 */
+ fc_host_supported_fc4s(host)[3] = 0x20;
+ /* For fibre channel services type 0x20 */
+ fc_host_supported_fc4s(host)[7] = 1;
+
+ memset(&attr.ioc_attr, 0, sizeof(attr.ioc_attr));
+ bfa_get_attr(&bfad->bfa, &attr.ioc_attr);
+ sprintf(fc_host_symbolic_name(host), "Brocade %s FV%s DV%s",
+ attr.ioc_attr.adapter_attr.model,
+ attr.ioc_attr.adapter_attr.fw_ver, BFAD_DRIVER_VERSION);
+
+ fc_host_supported_speeds(host) = 0;
+ fc_host_supported_speeds(host) |=
+ FC_PORTSPEED_8GBIT | FC_PORTSPEED_4GBIT | FC_PORTSPEED_2GBIT |
+ FC_PORTSPEED_1GBIT;
+
+ memset(&attr.pattr, 0, sizeof(attr.pattr));
+ bfa_pport_get_attr(&bfad->bfa, &attr.pattr);
+ fc_host_maxframe_size(host) = attr.pattr.pport_cfg.maxfrsize;
+}
+
+static void
+bfad_im_fc_rport_add(struct bfad_im_port_s *im_port, struct bfad_itnim_s *itnim)
+{
+ struct fc_rport_identifiers rport_ids;
+ struct fc_rport *fc_rport;
+ struct bfad_itnim_data_s *itnim_data;
+
+ rport_ids.node_name =
+ bfa_os_htonll(bfa_fcs_itnim_get_nwwn(&itnim->fcs_itnim));
+ rport_ids.port_name =
+ bfa_os_htonll(bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim));
+ rport_ids.port_id =
+ bfa_os_hton3b(bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim));
+ rport_ids.roles = FC_RPORT_ROLE_UNKNOWN;
+
+ itnim->fc_rport = fc_rport =
+ fc_remote_port_add(im_port->shost, 0, &rport_ids);
+
+ if (!fc_rport)
+ return;
+
+ fc_rport->maxframe_size =
+ bfa_fcs_itnim_get_maxfrsize(&itnim->fcs_itnim);
+ fc_rport->supported_classes = bfa_fcs_itnim_get_cos(&itnim->fcs_itnim);
+
+ itnim_data = fc_rport->dd_data;
+ itnim_data->itnim = itnim;
+
+ rport_ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
+
+ if (rport_ids.roles != FC_RPORT_ROLE_UNKNOWN)
+ fc_remote_port_rolechg(fc_rport, rport_ids.roles);
+
+ if ((fc_rport->scsi_target_id != -1)
+ && (fc_rport->scsi_target_id < MAX_FCP_TARGET))
+ itnim->scsi_tgt_id = fc_rport->scsi_target_id;
+
+ return;
+}
+
+/**
+ * Work queue handler using FC transport service
+* Context: kernel
+ */
+static void
+bfad_im_itnim_work_handler(struct work_struct *work)
+{
+ struct bfad_itnim_s *itnim = container_of(work, struct bfad_itnim_s,
+ itnim_work);
+ struct bfad_im_s *im = itnim->im;
+ struct bfad_s *bfad = im->bfad;
+ struct bfad_im_port_s *im_port;
+ unsigned long flags;
+ struct fc_rport *fc_rport;
+ wwn_t wwpn;
+ u32 fcid;
+ char wwpn_str[32], fcid_str[16];
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ im_port = itnim->im_port;
+ bfa_trc(bfad, itnim->state);
+ switch (itnim->state) {
+ case ITNIM_STATE_ONLINE:
+ if (!itnim->fc_rport) {
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ bfad_im_fc_rport_add(im_port, itnim);
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ wwpn = bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim);
+ fcid = bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim);
+ wwn2str(wwpn_str, wwpn);
+ fcid2str(fcid_str, fcid);
+ list_add_tail(&itnim->list_entry,
+ &im_port->itnim_mapped_list);
+ bfa_log(bfad->logmod, BFA_LOG_LINUX_ITNIM_ONLINE,
+ im_port->shost->host_no,
+ itnim->scsi_tgt_id,
+ fcid_str, wwpn_str);
+ } else {
+ printk(KERN_WARNING
+ "%s: itnim %llx is already in online state\n",
+ __FUNCTION__,
+ bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim));
+ }
+
+ break;
+ case ITNIM_STATE_OFFLINE_PENDING:
+ itnim->state = ITNIM_STATE_OFFLINE;
+ if (itnim->fc_rport) {
+ fc_rport = itnim->fc_rport;
+ ((struct bfad_itnim_data_s *)
+ fc_rport->dd_data)->itnim = NULL;
+ itnim->fc_rport = NULL;
+ if (!(im_port->port->flags & BFAD_PORT_DELETE)) {
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ fc_rport->dev_loss_tmo =
+ bfa_fcpim_path_tov_get(&bfad->bfa) + 1;
+ fc_remote_port_delete(fc_rport);
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ }
+ wwpn = bfa_fcs_itnim_get_pwwn(&itnim->fcs_itnim);
+ fcid = bfa_fcs_itnim_get_fcid(&itnim->fcs_itnim);
+ wwn2str(wwpn_str, wwpn);
+ fcid2str(fcid_str, fcid);
+ list_del(&itnim->list_entry);
+ bfa_log(bfad->logmod, BFA_LOG_LINUX_ITNIM_OFFLINE,
+ im_port->shost->host_no,
+ itnim->scsi_tgt_id,
+ fcid_str, wwpn_str);
+ }
+ break;
+ case ITNIM_STATE_FREE:
+ if (itnim->fc_rport) {
+ fc_rport = itnim->fc_rport;
+ ((struct bfad_itnim_data_s *)
+ fc_rport->dd_data)->itnim = NULL;
+ itnim->fc_rport = NULL;
+ if (!(im_port->port->flags & BFAD_PORT_DELETE)) {
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ fc_rport->dev_loss_tmo =
+ bfa_fcpim_path_tov_get(&bfad->bfa) + 1;
+ fc_remote_port_delete(fc_rport);
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ }
+ list_del(&itnim->list_entry);
+ }
+
+ kfree(itnim);
+ break;
+ default:
+ bfa_assert(0);
+ break;
+ }
+
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+}
+
+/**
+ * Scsi_Host template entry, queue a SCSI command to the BFAD.
+ */
+static int
+bfad_im_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
+{
+ struct bfad_im_port_s *im_port =
+ (struct bfad_im_port_s *) cmnd->device->host->hostdata[0];
+ struct bfad_s *bfad = im_port->bfad;
+ struct bfad_itnim_data_s *itnim_data = cmnd->device->hostdata;
+ struct bfad_itnim_s *itnim;
+ struct bfa_ioim_s *hal_io;
+ unsigned long flags;
+ int rc;
+ s16 sg_cnt = 0;
+ struct fc_rport *rport = starget_to_rport(scsi_target(cmnd->device));
+
+ rc = fc_remote_port_chkready(rport);
+ if (rc) {
+ cmnd->result = rc;
+ done(cmnd);
+ return 0;
+ }
+
+ sg_cnt = scsi_dma_map(cmnd);
+
+ if (sg_cnt < 0)
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ cmnd->scsi_done = done;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ if (!(bfad->bfad_flags & BFAD_HAL_START_DONE)) {
+ printk(KERN_WARNING
+ "bfad%d, queuecommand %p %x failed, BFA stopped\n",
+ bfad->inst_no, cmnd, cmnd->cmnd[0]);
+ cmnd->result = ScsiResult(DID_NO_CONNECT, 0);
+ goto out_fail_cmd;
+ }
+
+ itnim = itnim_data->itnim;
+ if (!itnim) {
+ cmnd->result = ScsiResult(DID_IMM_RETRY, 0);
+ goto out_fail_cmd;
+ }
+
+ hal_io = bfa_ioim_alloc(&bfad->bfa, (struct bfad_ioim_s *) cmnd,
+ itnim->bfa_itnim, sg_cnt);
+ if (!hal_io) {
+ printk(KERN_WARNING "hal_io failure\n");
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ scsi_dma_unmap(cmnd);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ cmnd->host_scribble = (char *)hal_io;
+ bfa_trc_fp(bfad, hal_io->iotag);
+ bfa_ioim_start(hal_io);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ return 0;
+
+out_fail_cmd:
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ scsi_dma_unmap(cmnd);
+ if (done)
+ done(cmnd);
+
+ return 0;
+}
+
+void
+bfad_os_rport_online_wait(struct bfad_s *bfad)
+{
+ int i;
+ int rport_delay = 10;
+
+ for (i = 0; !(bfad->bfad_flags & BFAD_PORT_ONLINE)
+ && i < bfa_linkup_delay; i++)
+ schedule_timeout_uninterruptible(HZ);
+
+ if (bfad->bfad_flags & BFAD_PORT_ONLINE) {
+ rport_delay = rport_delay < bfa_linkup_delay ?
+ rport_delay : bfa_linkup_delay;
+ for (i = 0; !(bfad->bfad_flags & BFAD_RPORT_ONLINE)
+ && i < rport_delay; i++)
+ schedule_timeout_uninterruptible(HZ);
+
+ if (rport_delay > 0 && (bfad->bfad_flags & BFAD_RPORT_ONLINE))
+ schedule_timeout_uninterruptible(rport_delay * HZ);
+ }
+}
+
+int
+bfad_os_get_linkup_delay(struct bfad_s *bfad)
+{
+
+ u8 nwwns = 0;
+ wwn_t *wwns;
+ int ldelay;
+
+ /*
+ * Querying for the boot target port wwns
+ * -- read from boot information in flash.
+ * If nwwns > 0 => boot over SAN and set bfa_linkup_delay = 30
+ * else => local boot machine set bfa_linkup_delay = 10
+ */
+
+ bfa_iocfc_get_bootwwns(&bfad->bfa, &nwwns, &wwns);
+
+ if (nwwns > 0) {
+ /* If boot over SAN; linkup_delay = 30sec */
+ ldelay = 30;
+ } else {
+ /* If local boot; linkup_delay = 10sec */
+ ldelay = 0;
+ }
+
+ return ldelay;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFAD_IM_H__
+#define __BFAD_IM_H__
+
+#include "fcs/bfa_fcs_fcpim.h"
+#include "bfad_im_compat.h"
+
+#define FCPI_NAME " fcpim"
+
+void bfad_flags_set(struct bfad_s *bfad, u32 flags);
+bfa_status_t bfad_im_module_init(void);
+void bfad_im_module_exit(void);
+bfa_status_t bfad_im_probe(struct bfad_s *bfad);
+void bfad_im_probe_undo(struct bfad_s *bfad);
+void bfad_im_probe_post(struct bfad_im_s *im);
+bfa_status_t bfad_im_port_new(struct bfad_s *bfad, struct bfad_port_s *port);
+void bfad_im_port_delete(struct bfad_s *bfad, struct bfad_port_s *port);
+void bfad_im_port_online(struct bfad_s *bfad, struct bfad_port_s *port);
+void bfad_im_port_offline(struct bfad_s *bfad, struct bfad_port_s *port);
+void bfad_im_port_clean(struct bfad_im_port_s *im_port);
+int bfad_im_scsi_host_alloc(struct bfad_s *bfad,
+ struct bfad_im_port_s *im_port);
+void bfad_im_scsi_host_free(struct bfad_s *bfad,
+ struct bfad_im_port_s *im_port);
+
+#define MAX_FCP_TARGET 1024
+#define MAX_FCP_LUN 16384
+#define BFAD_TARGET_RESET_TMO 60
+#define BFAD_LUN_RESET_TMO 60
+#define ScsiResult(host_code, scsi_code) (((host_code) << 16) | scsi_code)
+#define BFA_QUEUE_FULL_RAMP_UP_TIME 120
+#define BFAD_KOBJ_NAME_LEN 20
+
+/*
+ * itnim flags
+ */
+#define ITNIM_MAPPED 0x00000001
+
+#define SCSI_TASK_MGMT 0x00000001
+#define IO_DONE_BIT 0
+
+struct bfad_itnim_data_s {
+ struct bfad_itnim_s *itnim;
+};
+
+struct bfad_im_port_s {
+ struct bfad_s *bfad;
+ struct bfad_port_s *port;
+ struct work_struct port_delete_work;
+ int idr_id;
+ u16 cur_scsi_id;
+ struct list_head binding_list;
+ struct Scsi_Host *shost;
+ struct list_head itnim_mapped_list;
+};
+
+enum bfad_itnim_state {
+ ITNIM_STATE_NONE,
+ ITNIM_STATE_ONLINE,
+ ITNIM_STATE_OFFLINE_PENDING,
+ ITNIM_STATE_OFFLINE,
+ ITNIM_STATE_TIMEOUT,
+ ITNIM_STATE_FREE,
+};
+
+/*
+ * Per itnim data structure
+ */
+struct bfad_itnim_s {
+ struct list_head list_entry;
+ struct bfa_fcs_itnim_s fcs_itnim;
+ struct work_struct itnim_work;
+ u32 flags;
+ enum bfad_itnim_state state;
+ struct bfad_im_s *im;
+ struct bfad_im_port_s *im_port;
+ struct bfad_rport_s *drv_rport;
+ struct fc_rport *fc_rport;
+ struct bfa_itnim_s *bfa_itnim;
+ u16 scsi_tgt_id;
+ u16 queue_work;
+ unsigned long last_ramp_up_time;
+ unsigned long last_queue_full_time;
+};
+
+enum bfad_binding_type {
+ FCP_PWWN_BINDING = 0x1,
+ FCP_NWWN_BINDING = 0x2,
+ FCP_FCID_BINDING = 0x3,
+};
+
+struct bfad_fcp_binding {
+ struct list_head list_entry;
+ enum bfad_binding_type binding_type;
+ u16 scsi_target_id;
+ u32 fc_id;
+ wwn_t nwwn;
+ wwn_t pwwn;
+};
+
+struct bfad_im_s {
+ struct bfad_s *bfad;
+ struct workqueue_struct *drv_workq;
+ char drv_workq_name[BFAD_KOBJ_NAME_LEN];
+};
+
+struct Scsi_Host *bfad_os_scsi_host_alloc(struct bfad_im_port_s *im_port,
+ struct bfad_s *);
+bfa_status_t bfad_os_thread_workq(struct bfad_s *bfad);
+void bfad_os_destroy_workq(struct bfad_im_s *im);
+void bfad_os_itnim_process(struct bfad_itnim_s *itnim_drv);
+void bfad_os_fc_host_init(struct bfad_im_port_s *im_port);
+void bfad_os_init_work(struct bfad_im_port_s *im_port);
+void bfad_os_scsi_host_free(struct bfad_s *bfad,
+ struct bfad_im_port_s *im_port);
+void bfad_os_ramp_up_qdepth(struct bfad_itnim_s *itnim,
+ struct scsi_device *sdev);
+void bfad_os_handle_qfull(struct bfad_itnim_s *itnim, struct scsi_device *sdev);
+struct bfad_itnim_s *bfad_os_get_itnim(struct bfad_im_port_s *im_port, int id);
+int bfad_os_scsi_add_host(struct Scsi_Host *shost,
+ struct bfad_im_port_s *im_port, struct bfad_s *bfad);
+
+/*
+ * scsi_host_template entries
+ */
+void bfad_im_itnim_unmap(struct bfad_im_port_s *im_port,
+ struct bfad_itnim_s *itnim);
+
+extern struct scsi_host_template bfad_im_scsi_host_template;
+extern struct scsi_host_template bfad_im_vport_template;
+extern struct fc_function_template bfad_im_fc_function_template;
+extern struct scsi_transport_template *bfad_im_scsi_transport_template;
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFAD_IM_COMPAT_H__
+#define __BFAD_IM_COMPAT_H__
+
+extern u32 *bfi_image_buf;
+extern u32 bfi_image_size;
+
+extern struct device_attribute *bfad_im_host_attrs[];
+extern struct device_attribute *bfad_im_vport_attrs[];
+
+u32 *bfad_get_firmware_buf(struct pci_dev *pdev);
+u32 *bfad_read_firmware(struct pci_dev *pdev, u32 **bfi_image,
+ u32 *bfi_image_size, char *fw_name);
+
+static inline u32 *
+bfad_load_fwimg(struct pci_dev *pdev)
+{
+ return(bfad_get_firmware_buf(pdev));
+}
+
+static inline void
+bfad_free_fwimg(void)
+{
+ if (bfi_image_ct_size && bfi_image_ct)
+ vfree(bfi_image_ct);
+ if (bfi_image_cb_size && bfi_image_cb)
+ vfree(bfi_image_cb);
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include "bfad_drv.h"
+#include "bfad_trcmod.h"
+
+BFA_TRC_FILE(LDRV, INTR);
+
+/**
+ * bfa_isr BFA driver interrupt functions
+ */
+irqreturn_t bfad_intx(int irq, void *dev_id);
+static int msix_disable;
+module_param(msix_disable, int, S_IRUGO | S_IWUSR);
+/**
+ * Line based interrupt handler.
+ */
+irqreturn_t
+bfad_intx(int irq, void *dev_id)
+{
+ struct bfad_s *bfad = dev_id;
+ struct list_head doneq;
+ unsigned long flags;
+ bfa_boolean_t rc;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ rc = bfa_intx(&bfad->bfa);
+ if (!rc) {
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ return IRQ_NONE;
+ }
+
+ bfa_comp_deq(&bfad->bfa, &doneq);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ if (!list_empty(&doneq)) {
+ bfa_comp_process(&bfad->bfa, &doneq);
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_comp_free(&bfad->bfa, &doneq);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ bfa_trc_fp(bfad, irq);
+ }
+
+ return IRQ_HANDLED;
+
+}
+
+static irqreturn_t
+bfad_msix(int irq, void *dev_id)
+{
+ struct bfad_msix_s *vec = dev_id;
+ struct bfad_s *bfad = vec->bfad;
+ struct list_head doneq;
+ unsigned long flags;
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+
+ bfa_msix(&bfad->bfa, vec->msix.entry);
+ bfa_comp_deq(&bfad->bfa, &doneq);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+
+ if (!list_empty(&doneq)) {
+ bfa_comp_process(&bfad->bfa, &doneq);
+
+ spin_lock_irqsave(&bfad->bfad_lock, flags);
+ bfa_comp_free(&bfad->bfa, &doneq);
+ spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * Initialize the MSIX entry table.
+ */
+static void
+bfad_init_msix_entry(struct bfad_s *bfad, struct msix_entry *msix_entries,
+ int mask, int max_bit)
+{
+ int i;
+ int match = 0x00000001;
+
+ for (i = 0, bfad->nvec = 0; i < MAX_MSIX_ENTRY; i++) {
+ if (mask & match) {
+ bfad->msix_tab[bfad->nvec].msix.entry = i;
+ bfad->msix_tab[bfad->nvec].bfad = bfad;
+ msix_entries[bfad->nvec].entry = i;
+ bfad->nvec++;
+ }
+
+ match <<= 1;
+ }
+
+}
+
+int
+bfad_install_msix_handler(struct bfad_s *bfad)
+{
+ int i, error = 0;
+
+ for (i = 0; i < bfad->nvec; i++) {
+ error = request_irq(bfad->msix_tab[i].msix.vector,
+ (irq_handler_t) bfad_msix, 0,
+ BFAD_DRIVER_NAME, &bfad->msix_tab[i]);
+ bfa_trc(bfad, i);
+ bfa_trc(bfad, bfad->msix_tab[i].msix.vector);
+ if (error) {
+ int j;
+
+ for (j = 0; j < i; j++)
+ free_irq(bfad->msix_tab[j].msix.vector,
+ &bfad->msix_tab[j]);
+
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * Setup MSIX based interrupt.
+ */
+int
+bfad_setup_intr(struct bfad_s *bfad)
+{
+ int error = 0;
+ u32 mask = 0, i, num_bit = 0, max_bit = 0;
+ struct msix_entry msix_entries[MAX_MSIX_ENTRY];
+
+ /* Call BFA to get the msix map for this PCI function. */
+ bfa_msix_getvecs(&bfad->bfa, &mask, &num_bit, &max_bit);
+
+ /* Set up the msix entry table */
+ bfad_init_msix_entry(bfad, msix_entries, mask, max_bit);
+
+ if (!msix_disable) {
+ error = pci_enable_msix(bfad->pcidev, msix_entries, bfad->nvec);
+ if (error) {
+ /*
+ * Only error number of vector is available.
+ * We don't have a mechanism to map multiple
+ * interrupts into one vector, so even if we
+ * can try to request less vectors, we don't
+ * know how to associate interrupt events to
+ * vectors. Linux doesn't dupicate vectors
+ * in the MSIX table for this case.
+ */
+
+ printk(KERN_WARNING "bfad%d: "
+ "pci_enable_msix failed (%d),"
+ " use line based.\n", bfad->inst_no, error);
+
+ goto line_based;
+ }
+
+ /* Save the vectors */
+ for (i = 0; i < bfad->nvec; i++) {
+ bfa_trc(bfad, msix_entries[i].vector);
+ bfad->msix_tab[i].msix.vector = msix_entries[i].vector;
+ }
+
+ bfa_msix_init(&bfad->bfa, bfad->nvec);
+
+ bfad->bfad_flags |= BFAD_MSIX_ON;
+
+ return error;
+ }
+
+line_based:
+ error = 0;
+ if (request_irq
+ (bfad->pcidev->irq, (irq_handler_t) bfad_intx, BFAD_IRQ_FLAGS,
+ BFAD_DRIVER_NAME, bfad) != 0) {
+ /* Enable interrupt handler failed */
+ return 1;
+ }
+
+ return error;
+}
+
+void
+bfad_remove_intr(struct bfad_s *bfad)
+{
+ int i;
+
+ if (bfad->bfad_flags & BFAD_MSIX_ON) {
+ for (i = 0; i < bfad->nvec; i++)
+ free_irq(bfad->msix_tab[i].msix.vector,
+ &bfad->msix_tab[i]);
+
+ pci_disable_msix(bfad->pcidev);
+ bfad->bfad_flags &= ~BFAD_MSIX_ON;
+ } else {
+ free_irq(bfad->pcidev->irq, bfad);
+ }
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DRV_IPFC_H__
+#define __BFA_DRV_IPFC_H__
+
+
+#define IPFC_NAME ""
+
+#define bfad_ipfc_module_init(x) do {} while (0)
+#define bfad_ipfc_module_exit(x) do {} while (0)
+#define bfad_ipfc_probe(x) do {} while (0)
+#define bfad_ipfc_probe_undo(x) do {} while (0)
+#define bfad_ipfc_port_config(x, y) BFA_STATUS_OK
+#define bfad_ipfc_port_unconfig(x, y) do {} while (0)
+
+#define bfad_ipfc_probe_post(x) do {} while (0)
+#define bfad_ipfc_port_new(x, y, z) BFA_STATUS_OK
+#define bfad_ipfc_port_delete(x, y) do {} while (0)
+#define bfad_ipfc_port_online(x, y) do {} while (0)
+#define bfad_ipfc_port_offline(x, y) do {} while (0)
+
+#define bfad_ip_get_attr(x) BFA_STATUS_FAILED
+#define bfad_ip_reset_drv_stats(x) BFA_STATUS_FAILED
+#define bfad_ip_get_drv_stats(x, y) BFA_STATUS_FAILED
+#define bfad_ip_enable_ipfc(x, y, z) BFA_STATUS_FAILED
+
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfad_os.c Linux driver OS specific calls.
+ */
+
+#include "bfa_os_inc.h"
+#include "bfad_drv.h"
+
+void
+bfa_os_gettimeofday(struct bfa_timeval_s *tv)
+{
+ struct timeval tmp_tv;
+
+ do_gettimeofday(&tmp_tv);
+ tv->tv_sec = (u32) tmp_tv.tv_sec;
+ tv->tv_usec = (u32) tmp_tv.tv_usec;
+}
+
+void
+bfa_os_printf(struct bfa_log_mod_s *log_mod, u32 msg_id,
+ const char *fmt, ...)
+{
+ va_list ap;
+ #define BFA_STRING_256 256
+ char tmp[BFA_STRING_256];
+
+ va_start(ap, fmt);
+ vsprintf(tmp, fmt, ap);
+ va_end(ap);
+
+ printk(tmp);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * Brocade Fibre Channel HBA Linux Target Mode Driver
+ */
+
+/**
+ * tm/dummy/bfad_tm.h BFA callback dummy header file for BFA Linux target mode PCI interface module.
+ */
+
+#ifndef __BFAD_TM_H__
+#define __BFAD_TM_H__
+
+#include <defs/bfa_defs_status.h>
+
+#define FCPT_NAME ""
+
+/*
+ * Called from base Linux driver on (De)Init events
+ */
+
+/* attach tgt template with scst */
+#define bfad_tm_module_init() do {} while (0)
+
+/* detach/release tgt template */
+#define bfad_tm_module_exit() do {} while (0)
+
+#define bfad_tm_probe(x) do {} while (0)
+#define bfad_tm_probe_undo(x) do {} while (0)
+#define bfad_tm_probe_post(x) do {} while (0)
+
+/*
+ * Called by base Linux driver but triggered by BFA FCS on config events
+ */
+#define bfad_tm_port_new(x, y) BFA_STATUS_OK
+#define bfad_tm_port_delete(x, y) do {} while (0)
+
+/*
+ * Called by base Linux driver but triggered by BFA FCS on PLOGI/O events
+ */
+#define bfad_tm_port_online(x, y) do {} while (0)
+#define bfad_tm_port_offline(x, y) do {} while (0)
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfad_trcmod.h Linux driver trace modules
+ */
+
+
+#ifndef __BFAD_TRCMOD_H__
+#define __BFAD_TRCMOD_H__
+
+#include <cs/bfa_trc.h>
+
+/*
+ * !!! Only append to the enums defined here to avoid any versioning
+ * !!! needed between trace utility and driver version
+ */
+enum {
+ /* 2.6 Driver */
+ BFA_TRC_LDRV_BFAD = 1,
+ BFA_TRC_LDRV_BFAD_2_6 = 2,
+ BFA_TRC_LDRV_BFAD_2_6_9 = 3,
+ BFA_TRC_LDRV_BFAD_2_6_10 = 4,
+ BFA_TRC_LDRV_INTR = 5,
+ BFA_TRC_LDRV_IOCTL = 6,
+ BFA_TRC_LDRV_OS = 7,
+ BFA_TRC_LDRV_IM = 8,
+ BFA_TRC_LDRV_IM_2_6 = 9,
+ BFA_TRC_LDRV_IM_2_6_9 = 10,
+ BFA_TRC_LDRV_IM_2_6_10 = 11,
+ BFA_TRC_LDRV_TM = 12,
+ BFA_TRC_LDRV_IPFC = 13,
+ BFA_TRC_LDRV_IM_2_4 = 14,
+ BFA_TRC_LDRV_IM_VMW = 15,
+ BFA_TRC_LDRV_IM_LT_2_6_10 = 16,
+};
+
+#endif /* __BFAD_TRCMOD_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "lport_priv.h"
+
+/**
+ * fab.c port fab implementation.
+ */
+
+/**
+ * bfa_fcs_port_fab_public port fab public functions
+ */
+
+/**
+ * Called by port to initialize fabric services of the base port.
+ */
+void
+bfa_fcs_port_fab_init(struct bfa_fcs_port_s *port)
+{
+ bfa_fcs_port_ns_init(port);
+ bfa_fcs_port_scn_init(port);
+ bfa_fcs_port_ms_init(port);
+}
+
+/**
+ * Called by port to notify transition to online state.
+ */
+void
+bfa_fcs_port_fab_online(struct bfa_fcs_port_s *port)
+{
+ bfa_fcs_port_ns_online(port);
+ bfa_fcs_port_scn_online(port);
+}
+
+/**
+ * Called by port to notify transition to offline state.
+ */
+void
+bfa_fcs_port_fab_offline(struct bfa_fcs_port_s *port)
+{
+ bfa_fcs_port_ns_offline(port);
+ bfa_fcs_port_scn_offline(port);
+ bfa_fcs_port_ms_offline(port);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fabric.c Fabric module implementation.
+ */
+
+#include "fcs_fabric.h"
+#include "fcs_lport.h"
+#include "fcs_vport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs_auth.h"
+#include "fcs.h"
+#include "fcbuild.h"
+#include <log/bfa_log_fcs.h>
+#include <aen/bfa_aen_port.h>
+#include <bfa_svc.h>
+
+BFA_TRC_FILE(FCS, FABRIC);
+
+#define BFA_FCS_FABRIC_RETRY_DELAY (2000) /* Milliseconds */
+#define BFA_FCS_FABRIC_CLEANUP_DELAY (10000) /* Milliseconds */
+
+#define bfa_fcs_fabric_set_opertype(__fabric) do { \
+ if (bfa_pport_get_topology((__fabric)->fcs->bfa) \
+ == BFA_PPORT_TOPOLOGY_P2P) \
+ (__fabric)->oper_type = BFA_PPORT_TYPE_NPORT; \
+ else \
+ (__fabric)->oper_type = BFA_PPORT_TYPE_NLPORT; \
+} while (0)
+
+/*
+ * forward declarations
+ */
+static void bfa_fcs_fabric_init(struct bfa_fcs_fabric_s *fabric);
+static void bfa_fcs_fabric_login(struct bfa_fcs_fabric_s *fabric);
+static void bfa_fcs_fabric_notify_online(struct bfa_fcs_fabric_s *fabric);
+static void bfa_fcs_fabric_notify_offline(struct bfa_fcs_fabric_s *fabric);
+static void bfa_fcs_fabric_delay(void *cbarg);
+static void bfa_fcs_fabric_delete(struct bfa_fcs_fabric_s *fabric);
+static void bfa_fcs_fabric_delete_comp(void *cbarg);
+static void bfa_fcs_fabric_process_uf(struct bfa_fcs_fabric_s *fabric,
+ struct fchs_s *fchs, u16 len);
+static void bfa_fcs_fabric_process_flogi(struct bfa_fcs_fabric_s *fabric,
+ struct fchs_s *fchs, u16 len);
+static void bfa_fcs_fabric_send_flogi_acc(struct bfa_fcs_fabric_s *fabric);
+static void bfa_fcs_fabric_flogiacc_comp(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rspfchs);
+/**
+ * fcs_fabric_sm fabric state machine functions
+ */
+
+/**
+ * Fabric state machine events
+ */
+enum bfa_fcs_fabric_event {
+ BFA_FCS_FABRIC_SM_CREATE = 1, /* fabric create from driver */
+ BFA_FCS_FABRIC_SM_DELETE = 2, /* fabric delete from driver */
+ BFA_FCS_FABRIC_SM_LINK_DOWN = 3, /* link down from port */
+ BFA_FCS_FABRIC_SM_LINK_UP = 4, /* link up from port */
+ BFA_FCS_FABRIC_SM_CONT_OP = 5, /* continue op from flogi/auth */
+ BFA_FCS_FABRIC_SM_RETRY_OP = 6, /* continue op from flogi/auth */
+ BFA_FCS_FABRIC_SM_NO_FABRIC = 7, /* no fabric from flogi/auth
+ */
+ BFA_FCS_FABRIC_SM_PERF_EVFP = 8, /* perform EVFP from
+ *flogi/auth */
+ BFA_FCS_FABRIC_SM_ISOLATE = 9, /* isolate from EVFP processing */
+ BFA_FCS_FABRIC_SM_NO_TAGGING = 10,/* no VFT tagging from EVFP */
+ BFA_FCS_FABRIC_SM_DELAYED = 11, /* timeout delay event */
+ BFA_FCS_FABRIC_SM_AUTH_FAILED = 12, /* authentication failed */
+ BFA_FCS_FABRIC_SM_AUTH_SUCCESS = 13, /* authentication successful
+ */
+ BFA_FCS_FABRIC_SM_DELCOMP = 14, /* all vports deleted event */
+ BFA_FCS_FABRIC_SM_LOOPBACK = 15, /* Received our own FLOGI */
+ BFA_FCS_FABRIC_SM_START = 16, /* fabric delete from driver */
+};
+
+static void bfa_fcs_fabric_sm_uninit(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_created(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_linkdown(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_flogi(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_flogi_retry(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_auth(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_auth_failed(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_loopback(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_nofabric(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_evfp(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_evfp_done(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_isolated(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+static void bfa_fcs_fabric_sm_deleting(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event);
+/**
+ * Beginning state before fabric creation.
+ */
+static void
+bfa_fcs_fabric_sm_uninit(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_CREATE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_created);
+ bfa_fcs_fabric_init(fabric);
+ bfa_fcs_lport_init(&fabric->bport, fabric->fcs, FC_VF_ID_NULL,
+ &fabric->bport.port_cfg, NULL);
+ break;
+
+ case BFA_FCS_FABRIC_SM_LINK_UP:
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * Beginning state before fabric creation.
+ */
+static void
+bfa_fcs_fabric_sm_created(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_START:
+ if (bfa_pport_is_linkup(fabric->fcs->bfa)) {
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
+ bfa_fcs_fabric_login(fabric);
+ } else
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+ break;
+
+ case BFA_FCS_FABRIC_SM_LINK_UP:
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
+ bfa_fcs_modexit_comp(fabric->fcs);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * Link is down, awaiting LINK UP event from port. This is also the
+ * first state at fabric creation.
+ */
+static void
+bfa_fcs_fabric_sm_linkdown(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_LINK_UP:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
+ bfa_fcs_fabric_login(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_RETRY_OP:
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+ bfa_fcs_fabric_delete(fabric);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * FLOGI is in progress, awaiting FLOGI reply.
+ */
+static void
+bfa_fcs_fabric_sm_flogi(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_CONT_OP:
+
+ bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+ fabric->fab_type = BFA_FCS_FABRIC_SWITCHED;
+
+ if (fabric->auth_reqd && fabric->is_auth) {
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_auth);
+ bfa_trc(fabric->fcs, event);
+ } else {
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_online);
+ bfa_fcs_fabric_notify_online(fabric);
+ }
+ break;
+
+ case BFA_FCS_FABRIC_SM_RETRY_OP:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi_retry);
+ bfa_timer_start(fabric->fcs->bfa, &fabric->delay_timer,
+ bfa_fcs_fabric_delay, fabric,
+ BFA_FCS_FABRIC_RETRY_DELAY);
+ break;
+
+ case BFA_FCS_FABRIC_SM_LOOPBACK:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_loopback);
+ bfa_lps_discard(fabric->lps);
+ bfa_fcs_fabric_set_opertype(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_NO_FABRIC:
+ fabric->fab_type = BFA_FCS_FABRIC_N2N;
+ bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+ bfa_fcs_fabric_notify_online(fabric);
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_nofabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+ bfa_lps_discard(fabric->lps);
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+ bfa_lps_discard(fabric->lps);
+ bfa_fcs_fabric_delete(fabric);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+
+static void
+bfa_fcs_fabric_sm_flogi_retry(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_DELAYED:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_flogi);
+ bfa_fcs_fabric_login(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+ bfa_timer_stop(&fabric->delay_timer);
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+ bfa_timer_stop(&fabric->delay_timer);
+ bfa_fcs_fabric_delete(fabric);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * Authentication is in progress, awaiting authentication results.
+ */
+static void
+bfa_fcs_fabric_sm_auth(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_AUTH_FAILED:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_auth_failed);
+ bfa_lps_discard(fabric->lps);
+ break;
+
+ case BFA_FCS_FABRIC_SM_AUTH_SUCCESS:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_online);
+ bfa_fcs_fabric_notify_online(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_PERF_EVFP:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_evfp);
+ break;
+
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+ bfa_lps_discard(fabric->lps);
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+ bfa_fcs_fabric_delete(fabric);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * Authentication failed
+ */
+static void
+bfa_fcs_fabric_sm_auth_failed(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+ bfa_fcs_fabric_notify_offline(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+ bfa_fcs_fabric_delete(fabric);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * Port is in loopback mode.
+ */
+static void
+bfa_fcs_fabric_sm_loopback(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+ bfa_fcs_fabric_notify_offline(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+ bfa_fcs_fabric_delete(fabric);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * There is no attached fabric - private loop or NPort-to-NPort topology.
+ */
+static void
+bfa_fcs_fabric_sm_nofabric(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+ bfa_lps_discard(fabric->lps);
+ bfa_fcs_fabric_notify_offline(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+ bfa_fcs_fabric_delete(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_NO_FABRIC:
+ bfa_trc(fabric->fcs, fabric->bb_credit);
+ bfa_pport_set_tx_bbcredit(fabric->fcs->bfa, fabric->bb_credit);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * Fabric is online - normal operating state.
+ */
+static void
+bfa_fcs_fabric_sm_online(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_linkdown);
+ bfa_lps_discard(fabric->lps);
+ bfa_fcs_fabric_notify_offline(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_DELETE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_deleting);
+ bfa_fcs_fabric_delete(fabric);
+ break;
+
+ case BFA_FCS_FABRIC_SM_AUTH_FAILED:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_auth_failed);
+ bfa_lps_discard(fabric->lps);
+ break;
+
+ case BFA_FCS_FABRIC_SM_AUTH_SUCCESS:
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * Exchanging virtual fabric parameters.
+ */
+static void
+bfa_fcs_fabric_sm_evfp(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_CONT_OP:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_evfp_done);
+ break;
+
+ case BFA_FCS_FABRIC_SM_ISOLATE:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_isolated);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+/**
+ * EVFP exchange complete and VFT tagging is enabled.
+ */
+static void
+bfa_fcs_fabric_sm_evfp_done(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+}
+
+/**
+ * Port is isolated after EVFP exchange due to VF_ID mismatch (N and F).
+ */
+static void
+bfa_fcs_fabric_sm_isolated(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ bfa_log(fabric->fcs->logm, BFA_LOG_FCS_FABRIC_ISOLATED,
+ fabric->bport.port_cfg.pwwn, fabric->fcs->port_vfid,
+ fabric->event_arg.swp_vfid);
+}
+
+/**
+ * Fabric is being deleted, awaiting vport delete completions.
+ */
+static void
+bfa_fcs_fabric_sm_deleting(struct bfa_fcs_fabric_s *fabric,
+ enum bfa_fcs_fabric_event event)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_FABRIC_SM_DELCOMP:
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
+ bfa_fcs_modexit_comp(fabric->fcs);
+ break;
+
+ case BFA_FCS_FABRIC_SM_LINK_UP:
+ break;
+
+ case BFA_FCS_FABRIC_SM_LINK_DOWN:
+ bfa_fcs_fabric_notify_offline(fabric);
+ break;
+
+ default:
+ bfa_sm_fault(fabric->fcs, event);
+ }
+}
+
+
+
+/**
+ * fcs_fabric_private fabric private functions
+ */
+
+static void
+bfa_fcs_fabric_init(struct bfa_fcs_fabric_s *fabric)
+{
+ struct bfa_port_cfg_s *port_cfg = &fabric->bport.port_cfg;
+
+ port_cfg->roles = BFA_PORT_ROLE_FCP_IM;
+ port_cfg->nwwn = bfa_ioc_get_nwwn(&fabric->fcs->bfa->ioc);
+ port_cfg->pwwn = bfa_ioc_get_pwwn(&fabric->fcs->bfa->ioc);
+}
+
+/**
+ * Port Symbolic Name Creation for base port.
+ */
+void
+bfa_fcs_fabric_psymb_init(struct bfa_fcs_fabric_s *fabric)
+{
+ struct bfa_port_cfg_s *port_cfg = &fabric->bport.port_cfg;
+ struct bfa_adapter_attr_s adapter_attr;
+ struct bfa_fcs_driver_info_s *driver_info = &fabric->fcs->driver_info;
+
+ bfa_os_memset((void *)&adapter_attr, 0,
+ sizeof(struct bfa_adapter_attr_s));
+ bfa_ioc_get_adapter_attr(&fabric->fcs->bfa->ioc, &adapter_attr);
+
+ /*
+ * Model name/number
+ */
+ strncpy((char *)&port_cfg->sym_name, adapter_attr.model,
+ BFA_FCS_PORT_SYMBNAME_MODEL_SZ);
+ strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+
+ /*
+ * Driver Version
+ */
+ strncat((char *)&port_cfg->sym_name, (char *)driver_info->version,
+ BFA_FCS_PORT_SYMBNAME_VERSION_SZ);
+ strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+
+ /*
+ * Host machine name
+ */
+ strncat((char *)&port_cfg->sym_name,
+ (char *)driver_info->host_machine_name,
+ BFA_FCS_PORT_SYMBNAME_MACHINENAME_SZ);
+ strncat((char *)&port_cfg->sym_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+
+ /*
+ * Host OS Info :
+ * If OS Patch Info is not there, do not truncate any bytes from the
+ * OS name string and instead copy the entire OS info string (64 bytes).
+ */
+ if (driver_info->host_os_patch[0] == '\0') {
+ strncat((char *)&port_cfg->sym_name,
+ (char *)driver_info->host_os_name, BFA_FCS_OS_STR_LEN);
+ strncat((char *)&port_cfg->sym_name,
+ BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ } else {
+ strncat((char *)&port_cfg->sym_name,
+ (char *)driver_info->host_os_name,
+ BFA_FCS_PORT_SYMBNAME_OSINFO_SZ);
+ strncat((char *)&port_cfg->sym_name,
+ BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+
+ /*
+ * Append host OS Patch Info
+ */
+ strncat((char *)&port_cfg->sym_name,
+ (char *)driver_info->host_os_patch,
+ BFA_FCS_PORT_SYMBNAME_OSPATCH_SZ);
+ }
+
+ /*
+ * null terminate
+ */
+ port_cfg->sym_name.symname[BFA_SYMNAME_MAXLEN - 1] = 0;
+}
+
+/**
+ * bfa lps login completion callback
+ */
+void
+bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status)
+{
+ struct bfa_fcs_fabric_s *fabric = uarg;
+
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_trc(fabric->fcs, status);
+
+ switch (status) {
+ case BFA_STATUS_OK:
+ fabric->stats.flogi_accepts++;
+ break;
+
+ case BFA_STATUS_INVALID_MAC:
+ /*
+ * Only for CNA
+ */
+ fabric->stats.flogi_acc_err++;
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_RETRY_OP);
+
+ return;
+
+ case BFA_STATUS_EPROTOCOL:
+ switch (bfa_lps_get_extstatus(fabric->lps)) {
+ case BFA_EPROTO_BAD_ACCEPT:
+ fabric->stats.flogi_acc_err++;
+ break;
+
+ case BFA_EPROTO_UNKNOWN_RSP:
+ fabric->stats.flogi_unknown_rsp++;
+ break;
+
+ default:
+ break;
+ }
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_RETRY_OP);
+
+ return;
+
+ case BFA_STATUS_FABRIC_RJT:
+ fabric->stats.flogi_rejects++;
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_RETRY_OP);
+ return;
+
+ default:
+ fabric->stats.flogi_rsp_err++;
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_RETRY_OP);
+ return;
+ }
+
+ fabric->bb_credit = bfa_lps_get_peer_bbcredit(fabric->lps);
+ bfa_trc(fabric->fcs, fabric->bb_credit);
+
+ if (!bfa_lps_is_brcd_fabric(fabric->lps))
+ fabric->fabric_name = bfa_lps_get_peer_nwwn(fabric->lps);
+
+ /*
+ * Check port type. It should be 1 = F-port.
+ */
+ if (bfa_lps_is_fport(fabric->lps)) {
+ fabric->bport.pid = bfa_lps_get_pid(fabric->lps);
+ fabric->is_npiv = bfa_lps_is_npiv_en(fabric->lps);
+ fabric->is_auth = bfa_lps_is_authreq(fabric->lps);
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_CONT_OP);
+ } else {
+ /*
+ * Nport-2-Nport direct attached
+ */
+ fabric->bport.port_topo.pn2n.rem_port_wwn =
+ bfa_lps_get_peer_pwwn(fabric->lps);
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_NO_FABRIC);
+ }
+
+ bfa_trc(fabric->fcs, fabric->bport.pid);
+ bfa_trc(fabric->fcs, fabric->is_npiv);
+ bfa_trc(fabric->fcs, fabric->is_auth);
+}
+
+/**
+ * Allocate and send FLOGI.
+ */
+static void
+bfa_fcs_fabric_login(struct bfa_fcs_fabric_s *fabric)
+{
+ struct bfa_s *bfa = fabric->fcs->bfa;
+ struct bfa_port_cfg_s *pcfg = &fabric->bport.port_cfg;
+ u8 alpa = 0;
+
+ if (bfa_pport_get_topology(bfa) == BFA_PPORT_TOPOLOGY_LOOP)
+ alpa = bfa_pport_get_myalpa(bfa);
+
+ bfa_lps_flogi(fabric->lps, fabric, alpa, bfa_pport_get_maxfrsize(bfa),
+ pcfg->pwwn, pcfg->nwwn, fabric->auth_reqd);
+
+ fabric->stats.flogi_sent++;
+}
+
+static void
+bfa_fcs_fabric_notify_online(struct bfa_fcs_fabric_s *fabric)
+{
+ struct bfa_fcs_vport_s *vport;
+ struct list_head *qe, *qen;
+
+ bfa_trc(fabric->fcs, fabric->fabric_name);
+
+ bfa_fcs_fabric_set_opertype(fabric);
+ fabric->stats.fabric_onlines++;
+
+ /**
+ * notify online event to base and then virtual ports
+ */
+ bfa_fcs_port_online(&fabric->bport);
+
+ list_for_each_safe(qe, qen, &fabric->vport_q) {
+ vport = (struct bfa_fcs_vport_s *)qe;
+ bfa_fcs_vport_online(vport);
+ }
+}
+
+static void
+bfa_fcs_fabric_notify_offline(struct bfa_fcs_fabric_s *fabric)
+{
+ struct bfa_fcs_vport_s *vport;
+ struct list_head *qe, *qen;
+
+ bfa_trc(fabric->fcs, fabric->fabric_name);
+ fabric->stats.fabric_offlines++;
+
+ /**
+ * notify offline event first to vports and then base port.
+ */
+ list_for_each_safe(qe, qen, &fabric->vport_q) {
+ vport = (struct bfa_fcs_vport_s *)qe;
+ bfa_fcs_vport_offline(vport);
+ }
+
+ bfa_fcs_port_offline(&fabric->bport);
+
+ fabric->fabric_name = 0;
+ fabric->fabric_ip_addr[0] = 0;
+}
+
+static void
+bfa_fcs_fabric_delay(void *cbarg)
+{
+ struct bfa_fcs_fabric_s *fabric = cbarg;
+
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_DELAYED);
+}
+
+/**
+ * Delete all vports and wait for vport delete completions.
+ */
+static void
+bfa_fcs_fabric_delete(struct bfa_fcs_fabric_s *fabric)
+{
+ struct bfa_fcs_vport_s *vport;
+ struct list_head *qe, *qen;
+
+ list_for_each_safe(qe, qen, &fabric->vport_q) {
+ vport = (struct bfa_fcs_vport_s *)qe;
+ bfa_fcs_vport_delete(vport);
+ }
+
+ bfa_fcs_port_delete(&fabric->bport);
+ bfa_wc_wait(&fabric->wc);
+}
+
+static void
+bfa_fcs_fabric_delete_comp(void *cbarg)
+{
+ struct bfa_fcs_fabric_s *fabric = cbarg;
+
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_DELCOMP);
+}
+
+
+
+/**
+ * fcs_fabric_public fabric public functions
+ */
+
+/**
+ * Module initialization
+ */
+void
+bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs)
+{
+ struct bfa_fcs_fabric_s *fabric;
+
+ fabric = &fcs->fabric;
+ bfa_os_memset(fabric, 0, sizeof(struct bfa_fcs_fabric_s));
+
+ /**
+ * Initialize base fabric.
+ */
+ fabric->fcs = fcs;
+ INIT_LIST_HEAD(&fabric->vport_q);
+ INIT_LIST_HEAD(&fabric->vf_q);
+ fabric->lps = bfa_lps_alloc(fcs->bfa);
+ bfa_assert(fabric->lps);
+
+ /**
+ * Initialize fabric delete completion handler. Fabric deletion is complete
+ * when the last vport delete is complete.
+ */
+ bfa_wc_init(&fabric->wc, bfa_fcs_fabric_delete_comp, fabric);
+ bfa_wc_up(&fabric->wc); /* For the base port */
+
+ bfa_sm_set_state(fabric, bfa_fcs_fabric_sm_uninit);
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_CREATE);
+ bfa_trc(fcs, 0);
+}
+
+/**
+ * Module cleanup
+ */
+void
+bfa_fcs_fabric_modexit(struct bfa_fcs_s *fcs)
+{
+ struct bfa_fcs_fabric_s *fabric;
+
+ bfa_trc(fcs, 0);
+
+ /**
+ * Cleanup base fabric.
+ */
+ fabric = &fcs->fabric;
+ bfa_lps_delete(fabric->lps);
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_DELETE);
+}
+
+/**
+ * Fabric module start -- kick starts FCS actions
+ */
+void
+bfa_fcs_fabric_modstart(struct bfa_fcs_s *fcs)
+{
+ struct bfa_fcs_fabric_s *fabric;
+
+ bfa_trc(fcs, 0);
+ fabric = &fcs->fabric;
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_START);
+}
+
+/**
+ * Suspend fabric activity as part of driver suspend.
+ */
+void
+bfa_fcs_fabric_modsusp(struct bfa_fcs_s *fcs)
+{
+}
+
+bfa_boolean_t
+bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric)
+{
+ return (bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_loopback));
+}
+
+enum bfa_pport_type
+bfa_fcs_fabric_port_type(struct bfa_fcs_fabric_s *fabric)
+{
+ return fabric->oper_type;
+}
+
+/**
+ * Link up notification from BFA physical port module.
+ */
+void
+bfa_fcs_fabric_link_up(struct bfa_fcs_fabric_s *fabric)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_LINK_UP);
+}
+
+/**
+ * Link down notification from BFA physical port module.
+ */
+void
+bfa_fcs_fabric_link_down(struct bfa_fcs_fabric_s *fabric)
+{
+ bfa_trc(fabric->fcs, fabric->bport.port_cfg.pwwn);
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_LINK_DOWN);
+}
+
+/**
+ * A child vport is being created in the fabric.
+ *
+ * Call from vport module at vport creation. A list of base port and vports
+ * belonging to a fabric is maintained to propagate link events.
+ *
+ * param[in] fabric - Fabric instance. This can be a base fabric or vf.
+ * param[in] vport - Vport being created.
+ *
+ * @return None (always succeeds)
+ */
+void
+bfa_fcs_fabric_addvport(struct bfa_fcs_fabric_s *fabric,
+ struct bfa_fcs_vport_s *vport)
+{
+ /**
+ * - add vport to fabric's vport_q
+ */
+ bfa_trc(fabric->fcs, fabric->vf_id);
+
+ list_add_tail(&vport->qe, &fabric->vport_q);
+ fabric->num_vports++;
+ bfa_wc_up(&fabric->wc);
+}
+
+/**
+ * A child vport is being deleted from fabric.
+ *
+ * Vport is being deleted.
+ */
+void
+bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric,
+ struct bfa_fcs_vport_s *vport)
+{
+ list_del(&vport->qe);
+ fabric->num_vports--;
+ bfa_wc_down(&fabric->wc);
+}
+
+/**
+ * Base port is deleted.
+ */
+void
+bfa_fcs_fabric_port_delete_comp(struct bfa_fcs_fabric_s *fabric)
+{
+ bfa_wc_down(&fabric->wc);
+}
+
+/**
+ * Check if fabric is online.
+ *
+ * param[in] fabric - Fabric instance. This can be a base fabric or vf.
+ *
+ * @return TRUE/FALSE
+ */
+int
+bfa_fcs_fabric_is_online(struct bfa_fcs_fabric_s *fabric)
+{
+ return (bfa_sm_cmp_state(fabric, bfa_fcs_fabric_sm_online));
+}
+
+
+bfa_status_t
+bfa_fcs_fabric_addvf(struct bfa_fcs_fabric_s *vf, struct bfa_fcs_s *fcs,
+ struct bfa_port_cfg_s *port_cfg,
+ struct bfad_vf_s *vf_drv)
+{
+ bfa_sm_set_state(vf, bfa_fcs_fabric_sm_uninit);
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Lookup for a vport withing a fabric given its pwwn
+ */
+struct bfa_fcs_vport_s *
+bfa_fcs_fabric_vport_lookup(struct bfa_fcs_fabric_s *fabric, wwn_t pwwn)
+{
+ struct bfa_fcs_vport_s *vport;
+ struct list_head *qe;
+
+ list_for_each(qe, &fabric->vport_q) {
+ vport = (struct bfa_fcs_vport_s *)qe;
+ if (bfa_fcs_port_get_pwwn(&vport->lport) == pwwn)
+ return vport;
+ }
+
+ return NULL;
+}
+
+/**
+ * In a given fabric, return the number of lports.
+ *
+ * param[in] fabric - Fabric instance. This can be a base fabric or vf.
+ *
+* @return : 1 or more.
+ */
+u16
+bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric)
+{
+ return (fabric->num_vports);
+}
+
+/**
+ * Unsolicited frame receive handling.
+ */
+void
+bfa_fcs_fabric_uf_recv(struct bfa_fcs_fabric_s *fabric, struct fchs_s *fchs,
+ u16 len)
+{
+ u32 pid = fchs->d_id;
+ struct bfa_fcs_vport_s *vport;
+ struct list_head *qe;
+ struct fc_els_cmd_s *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+ struct fc_logi_s *flogi = (struct fc_logi_s *) els_cmd;
+
+ bfa_trc(fabric->fcs, len);
+ bfa_trc(fabric->fcs, pid);
+
+ /**
+ * Look for our own FLOGI frames being looped back. This means an
+ * external loopback cable is in place. Our own FLOGI frames are
+ * sometimes looped back when switch port gets temporarily bypassed.
+ */
+ if ((pid == bfa_os_ntoh3b(FC_FABRIC_PORT))
+ && (els_cmd->els_code == FC_ELS_FLOGI)
+ && (flogi->port_name == bfa_fcs_port_get_pwwn(&fabric->bport))) {
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_LOOPBACK);
+ return;
+ }
+
+ /**
+ * FLOGI/EVFP exchanges should be consumed by base fabric.
+ */
+ if (fchs->d_id == bfa_os_hton3b(FC_FABRIC_PORT)) {
+ bfa_trc(fabric->fcs, pid);
+ bfa_fcs_fabric_process_uf(fabric, fchs, len);
+ return;
+ }
+
+ if (fabric->bport.pid == pid) {
+ /**
+ * All authentication frames should be routed to auth
+ */
+ bfa_trc(fabric->fcs, els_cmd->els_code);
+ if (els_cmd->els_code == FC_ELS_AUTH) {
+ bfa_trc(fabric->fcs, els_cmd->els_code);
+ fabric->auth.response = (u8 *) els_cmd;
+ return;
+ }
+
+ bfa_trc(fabric->fcs, *(u8 *) ((u8 *) fchs));
+ bfa_fcs_port_uf_recv(&fabric->bport, fchs, len);
+ return;
+ }
+
+ /**
+ * look for a matching local port ID
+ */
+ list_for_each(qe, &fabric->vport_q) {
+ vport = (struct bfa_fcs_vport_s *)qe;
+ if (vport->lport.pid == pid) {
+ bfa_fcs_port_uf_recv(&vport->lport, fchs, len);
+ return;
+ }
+ }
+ bfa_trc(fabric->fcs, els_cmd->els_code);
+ bfa_fcs_port_uf_recv(&fabric->bport, fchs, len);
+}
+
+/**
+ * Unsolicited frames to be processed by fabric.
+ */
+static void
+bfa_fcs_fabric_process_uf(struct bfa_fcs_fabric_s *fabric, struct fchs_s *fchs,
+ u16 len)
+{
+ struct fc_els_cmd_s *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+ bfa_trc(fabric->fcs, els_cmd->els_code);
+
+ switch (els_cmd->els_code) {
+ case FC_ELS_FLOGI:
+ bfa_fcs_fabric_process_flogi(fabric, fchs, len);
+ break;
+
+ default:
+ /*
+ * need to generate a LS_RJT
+ */
+ break;
+ }
+}
+
+/**
+ * Process incoming FLOGI
+ */
+static void
+bfa_fcs_fabric_process_flogi(struct bfa_fcs_fabric_s *fabric,
+ struct fchs_s *fchs, u16 len)
+{
+ struct fc_logi_s *flogi = (struct fc_logi_s *) (fchs + 1);
+ struct bfa_fcs_port_s *bport = &fabric->bport;
+
+ bfa_trc(fabric->fcs, fchs->s_id);
+
+ fabric->stats.flogi_rcvd++;
+ /*
+ * Check port type. It should be 0 = n-port.
+ */
+ if (flogi->csp.port_type) {
+ /*
+ * @todo: may need to send a LS_RJT
+ */
+ bfa_trc(fabric->fcs, flogi->port_name);
+ fabric->stats.flogi_rejected++;
+ return;
+ }
+
+ fabric->bb_credit = bfa_os_ntohs(flogi->csp.bbcred);
+ bport->port_topo.pn2n.rem_port_wwn = flogi->port_name;
+ bport->port_topo.pn2n.reply_oxid = fchs->ox_id;
+
+ /*
+ * Send a Flogi Acc
+ */
+ bfa_fcs_fabric_send_flogi_acc(fabric);
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_NO_FABRIC);
+}
+
+static void
+bfa_fcs_fabric_send_flogi_acc(struct bfa_fcs_fabric_s *fabric)
+{
+ struct bfa_port_cfg_s *pcfg = &fabric->bport.port_cfg;
+ struct bfa_fcs_port_n2n_s *n2n_port = &fabric->bport.port_topo.pn2n;
+ struct bfa_s *bfa = fabric->fcs->bfa;
+ struct bfa_fcxp_s *fcxp;
+ u16 reqlen;
+ struct fchs_s fchs;
+
+ fcxp = bfa_fcs_fcxp_alloc(fabric->fcs);
+ /**
+ * Do not expect this failure -- expect remote node to retry
+ */
+ if (!fcxp)
+ return;
+
+ reqlen = fc_flogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_os_hton3b(FC_FABRIC_PORT),
+ n2n_port->reply_oxid, pcfg->pwwn,
+ pcfg->nwwn, bfa_pport_get_maxfrsize(bfa),
+ bfa_pport_get_rx_bbcredit(bfa));
+
+ bfa_fcxp_send(fcxp, NULL, fabric->vf_id, bfa_lps_get_tag(fabric->lps),
+ BFA_FALSE, FC_CLASS_3, reqlen, &fchs,
+ bfa_fcs_fabric_flogiacc_comp, fabric,
+ FC_MAX_PDUSZ, 0); /* Timeout 0 indicates no
+ * response expected
+ */
+}
+
+/**
+ * Flogi Acc completion callback.
+ */
+static void
+bfa_fcs_fabric_flogiacc_comp(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t status, u32 rsp_len,
+ u32 resid_len, struct fchs_s *rspfchs)
+{
+ struct bfa_fcs_fabric_s *fabric = cbarg;
+
+ bfa_trc(fabric->fcs, status);
+}
+
+/*
+ *
+ * @param[in] fabric - fabric
+ * @param[in] result - 1
+ *
+ * @return - none
+ */
+void
+bfa_fcs_auth_finished(struct bfa_fcs_fabric_s *fabric, enum auth_status status)
+{
+ bfa_trc(fabric->fcs, status);
+
+ if (status == FC_AUTH_STATE_SUCCESS)
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_AUTH_SUCCESS);
+ else
+ bfa_sm_send_event(fabric, BFA_FCS_FABRIC_SM_AUTH_FAILED);
+}
+
+/**
+ * Send AEN notification
+ */
+static void
+bfa_fcs_fabric_aen_post(struct bfa_fcs_port_s *port,
+ enum bfa_port_aen_event event)
+{
+ union bfa_aen_data_u aen_data;
+ struct bfa_log_mod_s *logmod = port->fcs->logm;
+ wwn_t pwwn = bfa_fcs_port_get_pwwn(port);
+ wwn_t fwwn = bfa_fcs_port_get_fabric_name(port);
+ char pwwn_ptr[BFA_STRING_32];
+ char fwwn_ptr[BFA_STRING_32];
+
+ wwn2str(pwwn_ptr, pwwn);
+ wwn2str(fwwn_ptr, fwwn);
+
+ switch (event) {
+ case BFA_PORT_AEN_FABRIC_NAME_CHANGE:
+ bfa_log(logmod, BFA_AEN_PORT_FABRIC_NAME_CHANGE, pwwn_ptr,
+ fwwn_ptr);
+ break;
+ default:
+ break;
+ }
+
+ aen_data.port.pwwn = pwwn;
+ aen_data.port.fwwn = fwwn;
+}
+
+/*
+ *
+ * @param[in] fabric - fabric
+ * @param[in] wwn_t - new fabric name
+ *
+ * @return - none
+ */
+void
+bfa_fcs_fabric_set_fabric_name(struct bfa_fcs_fabric_s *fabric,
+ wwn_t fabric_name)
+{
+ bfa_trc(fabric->fcs, fabric_name);
+
+ if (fabric->fabric_name == 0) {
+ /*
+ * With BRCD switches, we don't get Fabric Name in FLOGI.
+ * Don't generate a fabric name change event in this case.
+ */
+ fabric->fabric_name = fabric_name;
+ } else {
+ fabric->fabric_name = fabric_name;
+ /*
+ * Generate a Event
+ */
+ bfa_fcs_fabric_aen_post(&fabric->bport,
+ BFA_PORT_AEN_FABRIC_NAME_CHANGE);
+ }
+
+}
+
+/**
+ * Not used by FCS.
+ */
+void
+bfa_cb_lps_flogo_comp(void *bfad, void *uarg)
+{
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/*
+ * fcbuild.c - FC link service frame building and parsing routines
+ */
+
+#include <bfa_os_inc.h>
+#include "fcbuild.h"
+
+/*
+ * static build functions
+ */
+static void fc_els_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id);
+static void fc_bls_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id);
+static struct fchs_s fc_els_req_tmpl;
+static struct fchs_s fc_els_rsp_tmpl;
+static struct fchs_s fc_bls_req_tmpl;
+static struct fchs_s fc_bls_rsp_tmpl;
+static struct fc_ba_acc_s ba_acc_tmpl;
+static struct fc_logi_s plogi_tmpl;
+static struct fc_prli_s prli_tmpl;
+static struct fc_rrq_s rrq_tmpl;
+static struct fchs_s fcp_fchs_tmpl;
+
+void
+fcbuild_init(void)
+{
+ /*
+ * fc_els_req_tmpl
+ */
+ fc_els_req_tmpl.routing = FC_RTG_EXT_LINK;
+ fc_els_req_tmpl.cat_info = FC_CAT_LD_REQUEST;
+ fc_els_req_tmpl.type = FC_TYPE_ELS;
+ fc_els_req_tmpl.f_ctl =
+ bfa_os_hton3b(FCTL_SEQ_INI | FCTL_FS_EXCH | FCTL_END_SEQ |
+ FCTL_SI_XFER);
+ fc_els_req_tmpl.rx_id = FC_RXID_ANY;
+
+ /*
+ * fc_els_rsp_tmpl
+ */
+ fc_els_rsp_tmpl.routing = FC_RTG_EXT_LINK;
+ fc_els_rsp_tmpl.cat_info = FC_CAT_LD_REPLY;
+ fc_els_rsp_tmpl.type = FC_TYPE_ELS;
+ fc_els_rsp_tmpl.f_ctl =
+ bfa_os_hton3b(FCTL_EC_RESP | FCTL_SEQ_INI | FCTL_LS_EXCH |
+ FCTL_END_SEQ | FCTL_SI_XFER);
+ fc_els_rsp_tmpl.rx_id = FC_RXID_ANY;
+
+ /*
+ * fc_bls_req_tmpl
+ */
+ fc_bls_req_tmpl.routing = FC_RTG_BASIC_LINK;
+ fc_bls_req_tmpl.type = FC_TYPE_BLS;
+ fc_bls_req_tmpl.f_ctl = bfa_os_hton3b(FCTL_END_SEQ | FCTL_SI_XFER);
+ fc_bls_req_tmpl.rx_id = FC_RXID_ANY;
+
+ /*
+ * fc_bls_rsp_tmpl
+ */
+ fc_bls_rsp_tmpl.routing = FC_RTG_BASIC_LINK;
+ fc_bls_rsp_tmpl.cat_info = FC_CAT_BA_ACC;
+ fc_bls_rsp_tmpl.type = FC_TYPE_BLS;
+ fc_bls_rsp_tmpl.f_ctl =
+ bfa_os_hton3b(FCTL_EC_RESP | FCTL_SEQ_INI | FCTL_LS_EXCH |
+ FCTL_END_SEQ | FCTL_SI_XFER);
+ fc_bls_rsp_tmpl.rx_id = FC_RXID_ANY;
+
+ /*
+ * ba_acc_tmpl
+ */
+ ba_acc_tmpl.seq_id_valid = 0;
+ ba_acc_tmpl.low_seq_cnt = 0;
+ ba_acc_tmpl.high_seq_cnt = 0xFFFF;
+
+ /*
+ * plogi_tmpl
+ */
+ plogi_tmpl.csp.verhi = FC_PH_VER_PH_3;
+ plogi_tmpl.csp.verlo = FC_PH_VER_4_3;
+ plogi_tmpl.csp.bbcred = bfa_os_htons(0x0004);
+ plogi_tmpl.csp.ciro = 0x1;
+ plogi_tmpl.csp.cisc = 0x0;
+ plogi_tmpl.csp.altbbcred = 0x0;
+ plogi_tmpl.csp.conseq = bfa_os_htons(0x00FF);
+ plogi_tmpl.csp.ro_bitmap = bfa_os_htons(0x0002);
+ plogi_tmpl.csp.e_d_tov = bfa_os_htonl(2000);
+
+ plogi_tmpl.class3.class_valid = 1;
+ plogi_tmpl.class3.sequential = 1;
+ plogi_tmpl.class3.conseq = 0xFF;
+ plogi_tmpl.class3.ospx = 1;
+
+ /*
+ * prli_tmpl
+ */
+ prli_tmpl.command = FC_ELS_PRLI;
+ prli_tmpl.pglen = 0x10;
+ prli_tmpl.pagebytes = bfa_os_htons(0x0014);
+ prli_tmpl.parampage.type = FC_TYPE_FCP;
+ prli_tmpl.parampage.imagepair = 1;
+ prli_tmpl.parampage.servparams.rxrdisab = 1;
+
+ /*
+ * rrq_tmpl
+ */
+ rrq_tmpl.els_cmd.els_code = FC_ELS_RRQ;
+
+ /*
+ * fcp_fchs_tmpl
+ */
+ fcp_fchs_tmpl.routing = FC_RTG_FC4_DEV_DATA;
+ fcp_fchs_tmpl.cat_info = FC_CAT_UNSOLICIT_CMD;
+ fcp_fchs_tmpl.type = FC_TYPE_FCP;
+ fcp_fchs_tmpl.f_ctl =
+ bfa_os_hton3b(FCTL_FS_EXCH | FCTL_END_SEQ | FCTL_SI_XFER);
+ fcp_fchs_tmpl.seq_id = 1;
+ fcp_fchs_tmpl.rx_id = FC_RXID_ANY;
+}
+
+static void
+fc_gs_fchdr_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u32 ox_id)
+{
+ bfa_os_memset(fchs, 0, sizeof(struct fchs_s));
+
+ fchs->routing = FC_RTG_FC4_DEV_DATA;
+ fchs->cat_info = FC_CAT_UNSOLICIT_CTRL;
+ fchs->type = FC_TYPE_SERVICES;
+ fchs->f_ctl =
+ bfa_os_hton3b(FCTL_SEQ_INI | FCTL_FS_EXCH | FCTL_END_SEQ |
+ FCTL_SI_XFER);
+ fchs->rx_id = FC_RXID_ANY;
+ fchs->d_id = (d_id);
+ fchs->s_id = (s_id);
+ fchs->ox_id = bfa_os_htons(ox_id);
+
+ /**
+ * @todo no need to set ox_id for request
+ * no need to set rx_id for response
+ */
+}
+
+void
+fc_els_req_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id)
+{
+ bfa_os_memcpy(fchs, &fc_els_req_tmpl, sizeof(struct fchs_s));
+ fchs->d_id = (d_id);
+ fchs->s_id = (s_id);
+ fchs->ox_id = bfa_os_htons(ox_id);
+}
+
+static void
+fc_els_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id)
+{
+ bfa_os_memcpy(fchs, &fc_els_rsp_tmpl, sizeof(struct fchs_s));
+ fchs->d_id = d_id;
+ fchs->s_id = s_id;
+ fchs->ox_id = ox_id;
+}
+
+enum fc_parse_status
+fc_els_rsp_parse(struct fchs_s *fchs, int len)
+{
+ struct fc_els_cmd_s *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+ struct fc_ls_rjt_s *ls_rjt = (struct fc_ls_rjt_s *) els_cmd;
+
+ len = len;
+
+ switch (els_cmd->els_code) {
+ case FC_ELS_LS_RJT:
+ if (ls_rjt->reason_code == FC_LS_RJT_RSN_LOGICAL_BUSY)
+ return (FC_PARSE_BUSY);
+ else
+ return (FC_PARSE_FAILURE);
+
+ case FC_ELS_ACC:
+ return (FC_PARSE_OK);
+ }
+ return (FC_PARSE_OK);
+}
+
+static void
+fc_bls_rsp_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id)
+{
+ bfa_os_memcpy(fchs, &fc_bls_rsp_tmpl, sizeof(struct fchs_s));
+ fchs->d_id = d_id;
+ fchs->s_id = s_id;
+ fchs->ox_id = ox_id;
+}
+
+static u16
+fc_plogi_x_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+ u16 ox_id, wwn_t port_name, wwn_t node_name,
+ u16 pdu_size, u8 els_code)
+{
+ struct fc_logi_s *plogi = (struct fc_logi_s *) (pld);
+
+ bfa_os_memcpy(plogi, &plogi_tmpl, sizeof(struct fc_logi_s));
+
+ plogi->els_cmd.els_code = els_code;
+ if (els_code == FC_ELS_PLOGI)
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+ else
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+ plogi->csp.rxsz = plogi->class3.rxsz = bfa_os_htons(pdu_size);
+
+ bfa_os_memcpy(&plogi->port_name, &port_name, sizeof(wwn_t));
+ bfa_os_memcpy(&plogi->node_name, &node_name, sizeof(wwn_t));
+
+ return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_flogi_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
+ u16 ox_id, wwn_t port_name, wwn_t node_name,
+ u16 pdu_size, u8 set_npiv, u8 set_auth,
+ u16 local_bb_credits)
+{
+ u32 d_id = bfa_os_hton3b(FC_FABRIC_PORT);
+ u32 *vvl_info;
+
+ bfa_os_memcpy(flogi, &plogi_tmpl, sizeof(struct fc_logi_s));
+
+ flogi->els_cmd.els_code = FC_ELS_FLOGI;
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+ flogi->csp.rxsz = flogi->class3.rxsz = bfa_os_htons(pdu_size);
+ flogi->port_name = port_name;
+ flogi->node_name = node_name;
+
+ /*
+ * Set the NPIV Capability Bit ( word 1, bit 31) of Common
+ * Service Parameters.
+ */
+ flogi->csp.ciro = set_npiv;
+
+ /* set AUTH capability */
+ flogi->csp.security = set_auth;
+
+ flogi->csp.bbcred = bfa_os_htons(local_bb_credits);
+
+ /* Set brcd token in VVL */
+ vvl_info = (u32 *)&flogi->vvl[0];
+
+ /* set the flag to indicate the presence of VVL */
+ flogi->csp.npiv_supp = 1; /* @todo. field name is not correct */
+ vvl_info[0] = bfa_os_htonl(FLOGI_VVL_BRCD);
+
+ return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_flogi_acc_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
+ u16 ox_id, wwn_t port_name, wwn_t node_name,
+ u16 pdu_size, u16 local_bb_credits)
+{
+ u32 d_id = 0;
+
+ bfa_os_memcpy(flogi, &plogi_tmpl, sizeof(struct fc_logi_s));
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+ flogi->els_cmd.els_code = FC_ELS_ACC;
+ flogi->csp.rxsz = flogi->class3.rxsz = bfa_os_htons(pdu_size);
+ flogi->port_name = port_name;
+ flogi->node_name = node_name;
+
+ flogi->csp.bbcred = bfa_os_htons(local_bb_credits);
+
+ return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_fdisc_build(struct fchs_s *fchs, struct fc_logi_s *flogi, u32 s_id,
+ u16 ox_id, wwn_t port_name, wwn_t node_name,
+ u16 pdu_size)
+{
+ u32 d_id = bfa_os_hton3b(FC_FABRIC_PORT);
+
+ bfa_os_memcpy(flogi, &plogi_tmpl, sizeof(struct fc_logi_s));
+
+ flogi->els_cmd.els_code = FC_ELS_FDISC;
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+ flogi->csp.rxsz = flogi->class3.rxsz = bfa_os_htons(pdu_size);
+ flogi->port_name = port_name;
+ flogi->node_name = node_name;
+
+ return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_plogi_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+ u16 ox_id, wwn_t port_name, wwn_t node_name,
+ u16 pdu_size)
+{
+ return fc_plogi_x_build(fchs, pld, d_id, s_id, ox_id, port_name,
+ node_name, pdu_size, FC_ELS_PLOGI);
+}
+
+u16
+fc_plogi_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+ u16 ox_id, wwn_t port_name, wwn_t node_name,
+ u16 pdu_size)
+{
+ return fc_plogi_x_build(fchs, pld, d_id, s_id, ox_id, port_name,
+ node_name, pdu_size, FC_ELS_ACC);
+}
+
+enum fc_parse_status
+fc_plogi_rsp_parse(struct fchs_s *fchs, int len, wwn_t port_name)
+{
+ struct fc_els_cmd_s *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+ struct fc_logi_s *plogi;
+ struct fc_ls_rjt_s *ls_rjt;
+
+ switch (els_cmd->els_code) {
+ case FC_ELS_LS_RJT:
+ ls_rjt = (struct fc_ls_rjt_s *) (fchs + 1);
+ if (ls_rjt->reason_code == FC_LS_RJT_RSN_LOGICAL_BUSY)
+ return (FC_PARSE_BUSY);
+ else
+ return (FC_PARSE_FAILURE);
+ case FC_ELS_ACC:
+ plogi = (struct fc_logi_s *) (fchs + 1);
+ if (len < sizeof(struct fc_logi_s))
+ return (FC_PARSE_FAILURE);
+
+ if (!wwn_is_equal(plogi->port_name, port_name))
+ return (FC_PARSE_FAILURE);
+
+ if (!plogi->class3.class_valid)
+ return (FC_PARSE_FAILURE);
+
+ if (bfa_os_ntohs(plogi->class3.rxsz) < (FC_MIN_PDUSZ))
+ return (FC_PARSE_FAILURE);
+
+ return (FC_PARSE_OK);
+ default:
+ return (FC_PARSE_FAILURE);
+ }
+}
+
+enum fc_parse_status
+fc_plogi_parse(struct fchs_s *fchs)
+{
+ struct fc_logi_s *plogi = (struct fc_logi_s *) (fchs + 1);
+
+ if (plogi->class3.class_valid != 1)
+ return FC_PARSE_FAILURE;
+
+ if ((bfa_os_ntohs(plogi->class3.rxsz) < FC_MIN_PDUSZ)
+ || (bfa_os_ntohs(plogi->class3.rxsz) > FC_MAX_PDUSZ)
+ || (plogi->class3.rxsz == 0))
+ return (FC_PARSE_FAILURE);
+
+ return FC_PARSE_OK;
+}
+
+u16
+fc_prli_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+ u16 ox_id)
+{
+ struct fc_prli_s *prli = (struct fc_prli_s *) (pld);
+
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+ bfa_os_memcpy(prli, &prli_tmpl, sizeof(struct fc_prli_s));
+
+ prli->command = FC_ELS_PRLI;
+ prli->parampage.servparams.initiator = 1;
+ prli->parampage.servparams.retry = 1;
+ prli->parampage.servparams.rec_support = 1;
+ prli->parampage.servparams.task_retry_id = 0;
+ prli->parampage.servparams.confirm = 1;
+
+ return (sizeof(struct fc_prli_s));
+}
+
+u16
+fc_prli_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+ u16 ox_id, enum bfa_port_role role)
+{
+ struct fc_prli_s *prli = (struct fc_prli_s *) (pld);
+
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+ bfa_os_memcpy(prli, &prli_tmpl, sizeof(struct fc_prli_s));
+
+ prli->command = FC_ELS_ACC;
+
+ if ((role & BFA_PORT_ROLE_FCP_TM) == BFA_PORT_ROLE_FCP_TM)
+ prli->parampage.servparams.target = 1;
+ else
+ prli->parampage.servparams.initiator = 1;
+
+ prli->parampage.rspcode = FC_PRLI_ACC_XQTD;
+
+ return (sizeof(struct fc_prli_s));
+}
+
+enum fc_parse_status
+fc_prli_rsp_parse(struct fc_prli_s *prli, int len)
+{
+ if (len < sizeof(struct fc_prli_s))
+ return (FC_PARSE_FAILURE);
+
+ if (prli->command != FC_ELS_ACC)
+ return (FC_PARSE_FAILURE);
+
+ if ((prli->parampage.rspcode != FC_PRLI_ACC_XQTD)
+ && (prli->parampage.rspcode != FC_PRLI_ACC_PREDEF_IMG))
+ return (FC_PARSE_FAILURE);
+
+ if (prli->parampage.servparams.target != 1)
+ return (FC_PARSE_FAILURE);
+
+ return (FC_PARSE_OK);
+}
+
+enum fc_parse_status
+fc_prli_parse(struct fc_prli_s *prli)
+{
+ if (prli->parampage.type != FC_TYPE_FCP)
+ return (FC_PARSE_FAILURE);
+
+ if (!prli->parampage.imagepair)
+ return (FC_PARSE_FAILURE);
+
+ if (!prli->parampage.servparams.initiator)
+ return (FC_PARSE_FAILURE);
+
+ return (FC_PARSE_OK);
+}
+
+u16
+fc_logo_build(struct fchs_s *fchs, struct fc_logo_s *logo, u32 d_id,
+ u32 s_id, u16 ox_id, wwn_t port_name)
+{
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+ memset(logo, '\0', sizeof(struct fc_logo_s));
+ logo->els_cmd.els_code = FC_ELS_LOGO;
+ logo->nport_id = (s_id);
+ logo->orig_port_name = port_name;
+
+ return (sizeof(struct fc_logo_s));
+}
+
+static u16
+fc_adisc_x_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
+ u32 s_id, u16 ox_id, wwn_t port_name,
+ wwn_t node_name, u8 els_code)
+{
+ memset(adisc, '\0', sizeof(struct fc_adisc_s));
+
+ adisc->els_cmd.els_code = els_code;
+
+ if (els_code == FC_ELS_ADISC)
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+ else
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+ adisc->orig_HA = 0;
+ adisc->orig_port_name = port_name;
+ adisc->orig_node_name = node_name;
+ adisc->nport_id = (s_id);
+
+ return (sizeof(struct fc_adisc_s));
+}
+
+u16
+fc_adisc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
+ u32 s_id, u16 ox_id, wwn_t port_name,
+ wwn_t node_name)
+{
+ return fc_adisc_x_build(fchs, adisc, d_id, s_id, ox_id, port_name,
+ node_name, FC_ELS_ADISC);
+}
+
+u16
+fc_adisc_acc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc, u32 d_id,
+ u32 s_id, u16 ox_id, wwn_t port_name,
+ wwn_t node_name)
+{
+ return fc_adisc_x_build(fchs, adisc, d_id, s_id, ox_id, port_name,
+ node_name, FC_ELS_ACC);
+}
+
+enum fc_parse_status
+fc_adisc_rsp_parse(struct fc_adisc_s *adisc, int len, wwn_t port_name,
+ wwn_t node_name)
+{
+
+ if (len < sizeof(struct fc_adisc_s))
+ return (FC_PARSE_FAILURE);
+
+ if (adisc->els_cmd.els_code != FC_ELS_ACC)
+ return (FC_PARSE_FAILURE);
+
+ if (!wwn_is_equal(adisc->orig_port_name, port_name))
+ return (FC_PARSE_FAILURE);
+
+ return (FC_PARSE_OK);
+}
+
+enum fc_parse_status
+fc_adisc_parse(struct fchs_s *fchs, void *pld, u32 host_dap,
+ wwn_t node_name, wwn_t port_name)
+{
+ struct fc_adisc_s *adisc = (struct fc_adisc_s *) pld;
+
+ if (adisc->els_cmd.els_code != FC_ELS_ACC)
+ return (FC_PARSE_FAILURE);
+
+ if ((adisc->nport_id == (host_dap))
+ && wwn_is_equal(adisc->orig_port_name, port_name)
+ && wwn_is_equal(adisc->orig_node_name, node_name))
+ return (FC_PARSE_OK);
+
+ return (FC_PARSE_FAILURE);
+}
+
+enum fc_parse_status
+fc_pdisc_parse(struct fchs_s *fchs, wwn_t node_name, wwn_t port_name)
+{
+ struct fc_logi_s *pdisc = (struct fc_logi_s *) (fchs + 1);
+
+ if (pdisc->class3.class_valid != 1)
+ return FC_PARSE_FAILURE;
+
+ if ((bfa_os_ntohs(pdisc->class3.rxsz) <
+ (FC_MIN_PDUSZ - sizeof(struct fchs_s)))
+ || (pdisc->class3.rxsz == 0))
+ return (FC_PARSE_FAILURE);
+
+ if (!wwn_is_equal(pdisc->port_name, port_name))
+ return (FC_PARSE_FAILURE);
+
+ if (!wwn_is_equal(pdisc->node_name, node_name))
+ return (FC_PARSE_FAILURE);
+
+ return FC_PARSE_OK;
+}
+
+u16
+fc_abts_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id)
+{
+ bfa_os_memcpy(fchs, &fc_bls_req_tmpl, sizeof(struct fchs_s));
+ fchs->cat_info = FC_CAT_ABTS;
+ fchs->d_id = (d_id);
+ fchs->s_id = (s_id);
+ fchs->ox_id = bfa_os_htons(ox_id);
+
+ return (sizeof(struct fchs_s));
+}
+
+enum fc_parse_status
+fc_abts_rsp_parse(struct fchs_s *fchs, int len)
+{
+ if ((fchs->cat_info == FC_CAT_BA_ACC)
+ || (fchs->cat_info == FC_CAT_BA_RJT))
+ return (FC_PARSE_OK);
+
+ return (FC_PARSE_FAILURE);
+}
+
+u16
+fc_rrq_build(struct fchs_s *fchs, struct fc_rrq_s *rrq, u32 d_id,
+ u32 s_id, u16 ox_id, u16 rrq_oxid)
+{
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+ /*
+ * build rrq payload
+ */
+ bfa_os_memcpy(rrq, &rrq_tmpl, sizeof(struct fc_rrq_s));
+ rrq->s_id = (s_id);
+ rrq->ox_id = bfa_os_htons(rrq_oxid);
+ rrq->rx_id = FC_RXID_ANY;
+
+ return (sizeof(struct fc_rrq_s));
+}
+
+u16
+fc_logo_acc_build(struct fchs_s *fchs, void *pld, u32 d_id, u32 s_id,
+ u16 ox_id)
+{
+ struct fc_els_cmd_s *acc = pld;
+
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+ memset(acc, 0, sizeof(struct fc_els_cmd_s));
+ acc->els_code = FC_ELS_ACC;
+
+ return (sizeof(struct fc_els_cmd_s));
+}
+
+u16
+fc_ls_rjt_build(struct fchs_s *fchs, struct fc_ls_rjt_s *ls_rjt, u32 d_id,
+ u32 s_id, u16 ox_id, u8 reason_code,
+ u8 reason_code_expl)
+{
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+ memset(ls_rjt, 0, sizeof(struct fc_ls_rjt_s));
+
+ ls_rjt->els_cmd.els_code = FC_ELS_LS_RJT;
+ ls_rjt->reason_code = reason_code;
+ ls_rjt->reason_code_expl = reason_code_expl;
+ ls_rjt->vendor_unique = 0x00;
+
+ return (sizeof(struct fc_ls_rjt_s));
+}
+
+u16
+fc_ba_acc_build(struct fchs_s *fchs, struct fc_ba_acc_s *ba_acc, u32 d_id,
+ u32 s_id, u16 ox_id, u16 rx_id)
+{
+ fc_bls_rsp_build(fchs, d_id, s_id, ox_id);
+
+ bfa_os_memcpy(ba_acc, &ba_acc_tmpl, sizeof(struct fc_ba_acc_s));
+
+ fchs->rx_id = rx_id;
+
+ ba_acc->ox_id = fchs->ox_id;
+ ba_acc->rx_id = fchs->rx_id;
+
+ return (sizeof(struct fc_ba_acc_s));
+}
+
+u16
+fc_ls_acc_build(struct fchs_s *fchs, struct fc_els_cmd_s *els_cmd,
+ u32 d_id, u32 s_id, u16 ox_id)
+{
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+ memset(els_cmd, 0, sizeof(struct fc_els_cmd_s));
+ els_cmd->els_code = FC_ELS_ACC;
+
+ return (sizeof(struct fc_els_cmd_s));
+}
+
+int
+fc_logout_params_pages(struct fchs_s *fc_frame, u8 els_code)
+{
+ int num_pages = 0;
+ struct fc_prlo_s *prlo;
+ struct fc_tprlo_s *tprlo;
+
+ if (els_code == FC_ELS_PRLO) {
+ prlo = (struct fc_prlo_s *) (fc_frame + 1);
+ num_pages = (bfa_os_ntohs(prlo->payload_len) - 4) / 16;
+ } else {
+ tprlo = (struct fc_tprlo_s *) (fc_frame + 1);
+ num_pages = (bfa_os_ntohs(tprlo->payload_len) - 4) / 16;
+ }
+ return num_pages;
+}
+
+u16
+fc_tprlo_acc_build(struct fchs_s *fchs, struct fc_tprlo_acc_s *tprlo_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ int num_pages)
+{
+ int page;
+
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+ memset(tprlo_acc, 0, (num_pages * 16) + 4);
+ tprlo_acc->command = FC_ELS_ACC;
+
+ tprlo_acc->page_len = 0x10;
+ tprlo_acc->payload_len = bfa_os_htons((num_pages * 16) + 4);
+
+ for (page = 0; page < num_pages; page++) {
+ tprlo_acc->tprlo_acc_params[page].opa_valid = 0;
+ tprlo_acc->tprlo_acc_params[page].rpa_valid = 0;
+ tprlo_acc->tprlo_acc_params[page].fc4type_csp = FC_TYPE_FCP;
+ tprlo_acc->tprlo_acc_params[page].orig_process_assc = 0;
+ tprlo_acc->tprlo_acc_params[page].resp_process_assc = 0;
+ }
+ return (bfa_os_ntohs(tprlo_acc->payload_len));
+}
+
+u16
+fc_prlo_acc_build(struct fchs_s *fchs, struct fc_prlo_acc_s *prlo_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ int num_pages)
+{
+ int page;
+
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+ memset(prlo_acc, 0, (num_pages * 16) + 4);
+ prlo_acc->command = FC_ELS_ACC;
+ prlo_acc->page_len = 0x10;
+ prlo_acc->payload_len = bfa_os_htons((num_pages * 16) + 4);
+
+ for (page = 0; page < num_pages; page++) {
+ prlo_acc->prlo_acc_params[page].opa_valid = 0;
+ prlo_acc->prlo_acc_params[page].rpa_valid = 0;
+ prlo_acc->prlo_acc_params[page].fc4type_csp = FC_TYPE_FCP;
+ prlo_acc->prlo_acc_params[page].orig_process_assc = 0;
+ prlo_acc->prlo_acc_params[page].resp_process_assc = 0;
+ }
+
+ return (bfa_os_ntohs(prlo_acc->payload_len));
+}
+
+u16
+fc_rnid_build(struct fchs_s *fchs, struct fc_rnid_cmd_s *rnid, u32 d_id,
+ u32 s_id, u16 ox_id, u32 data_format)
+{
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+ memset(rnid, 0, sizeof(struct fc_rnid_cmd_s));
+
+ rnid->els_cmd.els_code = FC_ELS_RNID;
+ rnid->node_id_data_format = data_format;
+
+ return (sizeof(struct fc_rnid_cmd_s));
+}
+
+u16
+fc_rnid_acc_build(struct fchs_s *fchs, struct fc_rnid_acc_s *rnid_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ u32 data_format,
+ struct fc_rnid_common_id_data_s *common_id_data,
+ struct fc_rnid_general_topology_data_s *gen_topo_data)
+{
+ memset(rnid_acc, 0, sizeof(struct fc_rnid_acc_s));
+
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+ rnid_acc->els_cmd.els_code = FC_ELS_ACC;
+ rnid_acc->node_id_data_format = data_format;
+ rnid_acc->common_id_data_length =
+ sizeof(struct fc_rnid_common_id_data_s);
+ rnid_acc->common_id_data = *common_id_data;
+
+ if (data_format == RNID_NODEID_DATA_FORMAT_DISCOVERY) {
+ rnid_acc->specific_id_data_length =
+ sizeof(struct fc_rnid_general_topology_data_s);
+ bfa_os_assign(rnid_acc->gen_topology_data, *gen_topo_data);
+ return (sizeof(struct fc_rnid_acc_s));
+ } else {
+ return (sizeof(struct fc_rnid_acc_s) -
+ sizeof(struct fc_rnid_general_topology_data_s));
+ }
+
+}
+
+u16
+fc_rpsc_build(struct fchs_s *fchs, struct fc_rpsc_cmd_s *rpsc, u32 d_id,
+ u32 s_id, u16 ox_id)
+{
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+ memset(rpsc, 0, sizeof(struct fc_rpsc_cmd_s));
+
+ rpsc->els_cmd.els_code = FC_ELS_RPSC;
+ return (sizeof(struct fc_rpsc_cmd_s));
+}
+
+u16
+fc_rpsc2_build(struct fchs_s *fchs, struct fc_rpsc2_cmd_s *rpsc2,
+ u32 d_id, u32 s_id, u32 *pid_list,
+ u16 npids)
+{
+ u32 dctlr_id = FC_DOMAIN_CTRLR(bfa_os_hton3b(d_id));
+ int i = 0;
+
+ fc_els_req_build(fchs, bfa_os_hton3b(dctlr_id), s_id, 0);
+
+ memset(rpsc2, 0, sizeof(struct fc_rpsc2_cmd_s));
+
+ rpsc2->els_cmd.els_code = FC_ELS_RPSC;
+ rpsc2->token = bfa_os_htonl(FC_BRCD_TOKEN);
+ rpsc2->num_pids = bfa_os_htons(npids);
+ for (i = 0; i < npids; i++)
+ rpsc2->pid_list[i].pid = pid_list[i];
+
+ return (sizeof(struct fc_rpsc2_cmd_s) + ((npids - 1) *
+ (sizeof(u32))));
+}
+
+u16
+fc_rpsc_acc_build(struct fchs_s *fchs, struct fc_rpsc_acc_s *rpsc_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ struct fc_rpsc_speed_info_s *oper_speed)
+{
+ memset(rpsc_acc, 0, sizeof(struct fc_rpsc_acc_s));
+
+ fc_els_rsp_build(fchs, d_id, s_id, ox_id);
+
+ rpsc_acc->command = FC_ELS_ACC;
+ rpsc_acc->num_entries = bfa_os_htons(1);
+
+ rpsc_acc->speed_info[0].port_speed_cap =
+ bfa_os_htons(oper_speed->port_speed_cap);
+
+ rpsc_acc->speed_info[0].port_op_speed =
+ bfa_os_htons(oper_speed->port_op_speed);
+
+ return (sizeof(struct fc_rpsc_acc_s));
+
+}
+
+/*
+ * TBD -
+ * . get rid of unnecessary memsets
+ */
+
+u16
+fc_logo_rsp_parse(struct fchs_s *fchs, int len)
+{
+ struct fc_els_cmd_s *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+ len = len;
+ if (els_cmd->els_code != FC_ELS_ACC)
+ return FC_PARSE_FAILURE;
+
+ return FC_PARSE_OK;
+}
+
+u16
+fc_pdisc_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id, wwn_t port_name, wwn_t node_name,
+ u16 pdu_size)
+{
+ struct fc_logi_s *pdisc = (struct fc_logi_s *) (fchs + 1);
+
+ bfa_os_memcpy(pdisc, &plogi_tmpl, sizeof(struct fc_logi_s));
+
+ pdisc->els_cmd.els_code = FC_ELS_PDISC;
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+ pdisc->csp.rxsz = pdisc->class3.rxsz = bfa_os_htons(pdu_size);
+ pdisc->port_name = port_name;
+ pdisc->node_name = node_name;
+
+ return (sizeof(struct fc_logi_s));
+}
+
+u16
+fc_pdisc_rsp_parse(struct fchs_s *fchs, int len, wwn_t port_name)
+{
+ struct fc_logi_s *pdisc = (struct fc_logi_s *) (fchs + 1);
+
+ if (len < sizeof(struct fc_logi_s))
+ return (FC_PARSE_LEN_INVAL);
+
+ if (pdisc->els_cmd.els_code != FC_ELS_ACC)
+ return (FC_PARSE_ACC_INVAL);
+
+ if (!wwn_is_equal(pdisc->port_name, port_name))
+ return (FC_PARSE_PWWN_NOT_EQUAL);
+
+ if (!pdisc->class3.class_valid)
+ return (FC_PARSE_NWWN_NOT_EQUAL);
+
+ if (bfa_os_ntohs(pdisc->class3.rxsz) < (FC_MIN_PDUSZ))
+ return (FC_PARSE_RXSZ_INVAL);
+
+ return (FC_PARSE_OK);
+}
+
+u16
+fc_prlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id, u16 ox_id,
+ int num_pages)
+{
+ struct fc_prlo_s *prlo = (struct fc_prlo_s *) (fchs + 1);
+ int page;
+
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+ memset(prlo, 0, (num_pages * 16) + 4);
+ prlo->command = FC_ELS_PRLO;
+ prlo->page_len = 0x10;
+ prlo->payload_len = bfa_os_htons((num_pages * 16) + 4);
+
+ for (page = 0; page < num_pages; page++) {
+ prlo->prlo_params[page].type = FC_TYPE_FCP;
+ prlo->prlo_params[page].opa_valid = 0;
+ prlo->prlo_params[page].rpa_valid = 0;
+ prlo->prlo_params[page].orig_process_assc = 0;
+ prlo->prlo_params[page].resp_process_assc = 0;
+ }
+
+ return (bfa_os_ntohs(prlo->payload_len));
+}
+
+u16
+fc_prlo_rsp_parse(struct fchs_s *fchs, int len)
+{
+ struct fc_prlo_acc_s *prlo = (struct fc_prlo_acc_s *) (fchs + 1);
+ int num_pages = 0;
+ int page = 0;
+
+ len = len;
+
+ if (prlo->command != FC_ELS_ACC)
+ return (FC_PARSE_FAILURE);
+
+ num_pages = ((bfa_os_ntohs(prlo->payload_len)) - 4) / 16;
+
+ for (page = 0; page < num_pages; page++) {
+ if (prlo->prlo_acc_params[page].type != FC_TYPE_FCP)
+ return FC_PARSE_FAILURE;
+
+ if (prlo->prlo_acc_params[page].opa_valid != 0)
+ return FC_PARSE_FAILURE;
+
+ if (prlo->prlo_acc_params[page].rpa_valid != 0)
+ return FC_PARSE_FAILURE;
+
+ if (prlo->prlo_acc_params[page].orig_process_assc != 0)
+ return FC_PARSE_FAILURE;
+
+ if (prlo->prlo_acc_params[page].resp_process_assc != 0)
+ return FC_PARSE_FAILURE;
+ }
+ return (FC_PARSE_OK);
+
+}
+
+u16
+fc_tprlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id, int num_pages,
+ enum fc_tprlo_type tprlo_type, u32 tpr_id)
+{
+ struct fc_tprlo_s *tprlo = (struct fc_tprlo_s *) (fchs + 1);
+ int page;
+
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+ memset(tprlo, 0, (num_pages * 16) + 4);
+ tprlo->command = FC_ELS_TPRLO;
+ tprlo->page_len = 0x10;
+ tprlo->payload_len = bfa_os_htons((num_pages * 16) + 4);
+
+ for (page = 0; page < num_pages; page++) {
+ tprlo->tprlo_params[page].type = FC_TYPE_FCP;
+ tprlo->tprlo_params[page].opa_valid = 0;
+ tprlo->tprlo_params[page].rpa_valid = 0;
+ tprlo->tprlo_params[page].orig_process_assc = 0;
+ tprlo->tprlo_params[page].resp_process_assc = 0;
+ if (tprlo_type == FC_GLOBAL_LOGO) {
+ tprlo->tprlo_params[page].global_process_logout = 1;
+ } else if (tprlo_type == FC_TPR_LOGO) {
+ tprlo->tprlo_params[page].tpo_nport_valid = 1;
+ tprlo->tprlo_params[page].tpo_nport_id = (tpr_id);
+ }
+ }
+
+ return (bfa_os_ntohs(tprlo->payload_len));
+}
+
+u16
+fc_tprlo_rsp_parse(struct fchs_s *fchs, int len)
+{
+ struct fc_tprlo_acc_s *tprlo = (struct fc_tprlo_acc_s *) (fchs + 1);
+ int num_pages = 0;
+ int page = 0;
+
+ len = len;
+
+ if (tprlo->command != FC_ELS_ACC)
+ return (FC_PARSE_ACC_INVAL);
+
+ num_pages = (bfa_os_ntohs(tprlo->payload_len) - 4) / 16;
+
+ for (page = 0; page < num_pages; page++) {
+ if (tprlo->tprlo_acc_params[page].type != FC_TYPE_FCP)
+ return (FC_PARSE_NOT_FCP);
+ if (tprlo->tprlo_acc_params[page].opa_valid != 0)
+ return (FC_PARSE_OPAFLAG_INVAL);
+ if (tprlo->tprlo_acc_params[page].rpa_valid != 0)
+ return (FC_PARSE_RPAFLAG_INVAL);
+ if (tprlo->tprlo_acc_params[page].orig_process_assc != 0)
+ return (FC_PARSE_OPA_INVAL);
+ if (tprlo->tprlo_acc_params[page].resp_process_assc != 0)
+ return (FC_PARSE_RPA_INVAL);
+ }
+ return (FC_PARSE_OK);
+}
+
+enum fc_parse_status
+fc_rrq_rsp_parse(struct fchs_s *fchs, int len)
+{
+ struct fc_els_cmd_s *els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+ len = len;
+ if (els_cmd->els_code != FC_ELS_ACC)
+ return FC_PARSE_FAILURE;
+
+ return FC_PARSE_OK;
+}
+
+u16
+fc_ba_rjt_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id, u32 reason_code,
+ u32 reason_expl)
+{
+ struct fc_ba_rjt_s *ba_rjt = (struct fc_ba_rjt_s *) (fchs + 1);
+
+ fc_bls_rsp_build(fchs, d_id, s_id, ox_id);
+
+ fchs->cat_info = FC_CAT_BA_RJT;
+ ba_rjt->reason_code = reason_code;
+ ba_rjt->reason_expl = reason_expl;
+ return (sizeof(struct fc_ba_rjt_s));
+}
+
+static void
+fc_gs_cthdr_build(struct ct_hdr_s *cthdr, u32 s_id, u16 cmd_code)
+{
+ bfa_os_memset(cthdr, 0, sizeof(struct ct_hdr_s));
+ cthdr->rev_id = CT_GS3_REVISION;
+ cthdr->gs_type = CT_GSTYPE_DIRSERVICE;
+ cthdr->gs_sub_type = CT_GSSUBTYPE_NAMESERVER;
+ cthdr->cmd_rsp_code = bfa_os_htons(cmd_code);
+}
+
+static void
+fc_gs_fdmi_cthdr_build(struct ct_hdr_s *cthdr, u32 s_id, u16 cmd_code)
+{
+ bfa_os_memset(cthdr, 0, sizeof(struct ct_hdr_s));
+ cthdr->rev_id = CT_GS3_REVISION;
+ cthdr->gs_type = CT_GSTYPE_MGMTSERVICE;
+ cthdr->gs_sub_type = CT_GSSUBTYPE_HBA_MGMTSERVER;
+ cthdr->cmd_rsp_code = bfa_os_htons(cmd_code);
+}
+
+static void
+fc_gs_ms_cthdr_build(struct ct_hdr_s *cthdr, u32 s_id, u16 cmd_code,
+ u8 sub_type)
+{
+ bfa_os_memset(cthdr, 0, sizeof(struct ct_hdr_s));
+ cthdr->rev_id = CT_GS3_REVISION;
+ cthdr->gs_type = CT_GSTYPE_MGMTSERVICE;
+ cthdr->gs_sub_type = sub_type;
+ cthdr->cmd_rsp_code = bfa_os_htons(cmd_code);
+}
+
+u16
+fc_gidpn_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+ wwn_t port_name)
+{
+
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_gidpn_req_s *gidpn =
+ (struct fcgs_gidpn_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+ fc_gs_cthdr_build(cthdr, s_id, GS_GID_PN);
+
+ bfa_os_memset(gidpn, 0, sizeof(struct fcgs_gidpn_req_s));
+ gidpn->port_name = port_name;
+ return (sizeof(struct fcgs_gidpn_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_gpnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+ u32 port_id)
+{
+
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ fcgs_gpnid_req_t *gpnid = (fcgs_gpnid_req_t *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+ fc_gs_cthdr_build(cthdr, s_id, GS_GPN_ID);
+
+ bfa_os_memset(gpnid, 0, sizeof(fcgs_gpnid_req_t));
+ gpnid->dap = port_id;
+ return (sizeof(fcgs_gpnid_req_t) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_gnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+ u32 port_id)
+{
+
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ fcgs_gnnid_req_t *gnnid = (fcgs_gnnid_req_t *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+ fc_gs_cthdr_build(cthdr, s_id, GS_GNN_ID);
+
+ bfa_os_memset(gnnid, 0, sizeof(fcgs_gnnid_req_t));
+ gnnid->dap = port_id;
+ return (sizeof(fcgs_gnnid_req_t) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_ct_rsp_parse(struct ct_hdr_s *cthdr)
+{
+ if (bfa_os_ntohs(cthdr->cmd_rsp_code) != CT_RSP_ACCEPT) {
+ if (cthdr->reason_code == CT_RSN_LOGICAL_BUSY)
+ return FC_PARSE_BUSY;
+ else
+ return FC_PARSE_FAILURE;
+ }
+
+ return FC_PARSE_OK;
+}
+
+u16
+fc_scr_build(struct fchs_s *fchs, struct fc_scr_s *scr, u8 set_br_reg,
+ u32 s_id, u16 ox_id)
+{
+ u32 d_id = bfa_os_hton3b(FC_FABRIC_CONTROLLER);
+
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+
+ bfa_os_memset(scr, 0, sizeof(struct fc_scr_s));
+ scr->command = FC_ELS_SCR;
+ scr->reg_func = FC_SCR_REG_FUNC_FULL;
+ if (set_br_reg)
+ scr->vu_reg_func = FC_VU_SCR_REG_FUNC_FABRIC_NAME_CHANGE;
+
+ return (sizeof(struct fc_scr_s));
+}
+
+u16
+fc_rscn_build(struct fchs_s *fchs, struct fc_rscn_pl_s *rscn, u32 s_id,
+ u16 ox_id)
+{
+ u32 d_id = bfa_os_hton3b(FC_FABRIC_CONTROLLER);
+ u16 payldlen;
+
+ fc_els_req_build(fchs, d_id, s_id, ox_id);
+ rscn->command = FC_ELS_RSCN;
+ rscn->pagelen = sizeof(rscn->event[0]);
+
+ payldlen = sizeof(u32) + rscn->pagelen;
+ rscn->payldlen = bfa_os_htons(payldlen);
+
+ rscn->event[0].format = FC_RSCN_FORMAT_PORTID;
+ rscn->event[0].portid = s_id;
+
+ return (sizeof(struct fc_rscn_pl_s));
+}
+
+u16
+fc_rftid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+ enum bfa_port_role roles)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_rftid_req_s *rftid =
+ (struct fcgs_rftid_req_s *) (cthdr + 1);
+ u32 type_value, d_id = bfa_os_hton3b(FC_NAME_SERVER);
+ u8 index;
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+ fc_gs_cthdr_build(cthdr, s_id, GS_RFT_ID);
+
+ bfa_os_memset(rftid, 0, sizeof(struct fcgs_rftid_req_s));
+
+ rftid->dap = s_id;
+
+ /* By default, FCP FC4 Type is registered */
+ index = FC_TYPE_FCP >> 5;
+ type_value = 1 << (FC_TYPE_FCP % 32);
+ rftid->fc4_type[index] = bfa_os_htonl(type_value);
+
+ if (roles & BFA_PORT_ROLE_FCP_IPFC) {
+ index = FC_TYPE_IP >> 5;
+ type_value = 1 << (FC_TYPE_IP % 32);
+ rftid->fc4_type[index] |= bfa_os_htonl(type_value);
+ }
+
+ return (sizeof(struct fcgs_rftid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rftid_build_sol(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u16 ox_id, u8 *fc4_bitmap,
+ u32 bitmap_size)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_rftid_req_s *rftid =
+ (struct fcgs_rftid_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+ fc_gs_cthdr_build(cthdr, s_id, GS_RFT_ID);
+
+ bfa_os_memset(rftid, 0, sizeof(struct fcgs_rftid_req_s));
+
+ rftid->dap = s_id;
+ bfa_os_memcpy((void *)rftid->fc4_type, (void *)fc4_bitmap,
+ (bitmap_size < 32 ? bitmap_size : 32));
+
+ return (sizeof(struct fcgs_rftid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rffid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+ u8 fc4_type, u8 fc4_ftrs)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_rffid_req_s *rffid =
+ (struct fcgs_rffid_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+ fc_gs_cthdr_build(cthdr, s_id, GS_RFF_ID);
+
+ bfa_os_memset(rffid, 0, sizeof(struct fcgs_rffid_req_s));
+
+ rffid->dap = s_id;
+ rffid->fc4ftr_bits = fc4_ftrs;
+ rffid->fc4_type = fc4_type;
+
+ return (sizeof(struct fcgs_rffid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rspnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u16 ox_id,
+ u8 *name)
+{
+
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_rspnid_req_s *rspnid =
+ (struct fcgs_rspnid_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, ox_id);
+ fc_gs_cthdr_build(cthdr, s_id, GS_RSPN_ID);
+
+ bfa_os_memset(rspnid, 0, sizeof(struct fcgs_rspnid_req_s));
+
+ rspnid->dap = s_id;
+ rspnid->spn_len = (u8) strlen((char *)name);
+ strncpy((char *)rspnid->spn, (char *)name, rspnid->spn_len);
+
+ return (sizeof(struct fcgs_rspnid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_gid_ft_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u8 fc4_type)
+{
+
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_gidft_req_s *gidft =
+ (struct fcgs_gidft_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+
+ fc_gs_cthdr_build(cthdr, s_id, GS_GID_FT);
+
+ bfa_os_memset(gidft, 0, sizeof(struct fcgs_gidft_req_s));
+ gidft->fc4_type = fc4_type;
+ gidft->domain_id = 0;
+ gidft->area_id = 0;
+
+ return (sizeof(struct fcgs_gidft_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rpnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
+ wwn_t port_name)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_rpnid_req_s *rpnid =
+ (struct fcgs_rpnid_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+ fc_gs_cthdr_build(cthdr, s_id, GS_RPN_ID);
+
+ bfa_os_memset(rpnid, 0, sizeof(struct fcgs_rpnid_req_s));
+ rpnid->port_id = port_id;
+ rpnid->port_name = port_name;
+
+ return (sizeof(struct fcgs_rpnid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
+ wwn_t node_name)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_rnnid_req_s *rnnid =
+ (struct fcgs_rnnid_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+ fc_gs_cthdr_build(cthdr, s_id, GS_RNN_ID);
+
+ bfa_os_memset(rnnid, 0, sizeof(struct fcgs_rnnid_req_s));
+ rnnid->port_id = port_id;
+ rnnid->node_name = node_name;
+
+ return (sizeof(struct fcgs_rnnid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rcsid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
+ u32 cos)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_rcsid_req_s *rcsid =
+ (struct fcgs_rcsid_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+ fc_gs_cthdr_build(cthdr, s_id, GS_RCS_ID);
+
+ bfa_os_memset(rcsid, 0, sizeof(struct fcgs_rcsid_req_s));
+ rcsid->port_id = port_id;
+ rcsid->cos = cos;
+
+ return (sizeof(struct fcgs_rcsid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_rptid_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id,
+ u8 port_type)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_rptid_req_s *rptid =
+ (struct fcgs_rptid_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+ fc_gs_cthdr_build(cthdr, s_id, GS_RPT_ID);
+
+ bfa_os_memset(rptid, 0, sizeof(struct fcgs_rptid_req_s));
+ rptid->port_id = port_id;
+ rptid->port_type = port_type;
+
+ return (sizeof(struct fcgs_rptid_req_s) + sizeof(struct ct_hdr_s));
+}
+
+u16
+fc_ganxt_build(struct fchs_s *fchs, void *pyld, u32 s_id, u32 port_id)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ struct fcgs_ganxt_req_s *ganxt =
+ (struct fcgs_ganxt_req_s *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_NAME_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+ fc_gs_cthdr_build(cthdr, s_id, GS_GA_NXT);
+
+ bfa_os_memset(ganxt, 0, sizeof(struct fcgs_ganxt_req_s));
+ ganxt->port_id = port_id;
+
+ return (sizeof(struct ct_hdr_s) + sizeof(struct fcgs_ganxt_req_s));
+}
+
+/*
+ * Builds fc hdr and ct hdr for FDMI requests.
+ */
+u16
+fc_fdmi_reqhdr_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u16 cmd_code)
+{
+
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ u32 d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+ fc_gs_fdmi_cthdr_build(cthdr, s_id, cmd_code);
+
+ return (sizeof(struct ct_hdr_s));
+}
+
+/*
+ * Given a FC4 Type, this function returns a fc4 type bitmask
+ */
+void
+fc_get_fc4type_bitmask(u8 fc4_type, u8 *bit_mask)
+{
+ u8 index;
+ u32 *ptr = (u32 *) bit_mask;
+ u32 type_value;
+
+ /*
+ * @todo : Check for bitmask size
+ */
+
+ index = fc4_type >> 5;
+ type_value = 1 << (fc4_type % 32);
+ ptr[index] = bfa_os_htonl(type_value);
+
+}
+
+/*
+ * GMAL Request
+ */
+u16
+fc_gmal_req_build(struct fchs_s *fchs, void *pyld, u32 s_id, wwn_t wwn)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ fcgs_gmal_req_t *gmal = (fcgs_gmal_req_t *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+ fc_gs_ms_cthdr_build(cthdr, s_id, GS_FC_GMAL_CMD,
+ CT_GSSUBTYPE_CFGSERVER);
+
+ bfa_os_memset(gmal, 0, sizeof(fcgs_gmal_req_t));
+ gmal->wwn = wwn;
+
+ return (sizeof(struct ct_hdr_s) + sizeof(fcgs_gmal_req_t));
+}
+
+/*
+ * GFN (Get Fabric Name) Request
+ */
+u16
+fc_gfn_req_build(struct fchs_s *fchs, void *pyld, u32 s_id, wwn_t wwn)
+{
+ struct ct_hdr_s *cthdr = (struct ct_hdr_s *) pyld;
+ fcgs_gfn_req_t *gfn = (fcgs_gfn_req_t *) (cthdr + 1);
+ u32 d_id = bfa_os_hton3b(FC_MGMT_SERVER);
+
+ fc_gs_fchdr_build(fchs, d_id, s_id, 0);
+ fc_gs_ms_cthdr_build(cthdr, s_id, GS_FC_GFN_CMD,
+ CT_GSSUBTYPE_CFGSERVER);
+
+ bfa_os_memset(gfn, 0, sizeof(fcgs_gfn_req_t));
+ gfn->wwn = wwn;
+
+ return (sizeof(struct ct_hdr_s) + sizeof(fcgs_gfn_req_t));
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/*
+ * fcbuild.h - FC link service frame building and parsing routines
+ */
+
+#ifndef __FCBUILD_H__
+#define __FCBUILD_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/fc.h>
+#include <protocol/fcp.h>
+#include <protocol/ct.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_pport.h>
+
+/*
+ * Utility Macros/functions
+ */
+
+#define fcif_sof_set(_ifhdr, _sof) (_ifhdr)->sof = FC_ ## _sof
+#define fcif_eof_set(_ifhdr, _eof) (_ifhdr)->eof = FC_ ## _eof
+
+#define wwn_is_equal(_wwn1, _wwn2) \
+ (memcmp(&(_wwn1), &(_wwn2), sizeof(wwn_t)) == 0)
+
+#define fc_roundup(_l, _s) (((_l) + ((_s) - 1)) & ~((_s) - 1))
+
+/*
+ * Given the fc response length, this routine will return
+ * the length of the actual payload bytes following the CT header.
+ *
+ * Assumes the input response length does not include the crc, eof, etc.
+ */
+static inline u32
+fc_get_ctresp_pyld_len(u32 resp_len)
+{
+ return (resp_len - sizeof(struct ct_hdr_s));
+}
+
+/*
+ * Convert bfa speed to rpsc speed value.
+ */
+static inline enum bfa_pport_speed
+fc_rpsc_operspeed_to_bfa_speed(enum fc_rpsc_op_speed_s speed)
+{
+ switch (speed) {
+
+ case RPSC_OP_SPEED_1G:
+ return BFA_PPORT_SPEED_1GBPS;
+
+ case RPSC_OP_SPEED_2G:
+ return BFA_PPORT_SPEED_2GBPS;
+
+ case RPSC_OP_SPEED_4G:
+ return BFA_PPORT_SPEED_4GBPS;
+
+ case RPSC_OP_SPEED_8G:
+ return BFA_PPORT_SPEED_8GBPS;
+
+ default:
+ return BFA_PPORT_SPEED_UNKNOWN;
+ }
+}
+
+/*
+ * Convert RPSC speed to bfa speed value.
+ */
+static inline enum fc_rpsc_op_speed_s
+fc_bfa_speed_to_rpsc_operspeed(enum bfa_pport_speed op_speed)
+{
+ switch (op_speed) {
+
+ case BFA_PPORT_SPEED_1GBPS:
+ return RPSC_OP_SPEED_1G;
+
+ case BFA_PPORT_SPEED_2GBPS:
+ return RPSC_OP_SPEED_2G;
+
+ case BFA_PPORT_SPEED_4GBPS:
+ return RPSC_OP_SPEED_4G;
+
+ case BFA_PPORT_SPEED_8GBPS:
+ return RPSC_OP_SPEED_8G;
+
+ default:
+ return RPSC_OP_SPEED_NOT_EST;
+ }
+}
+enum fc_parse_status {
+ FC_PARSE_OK = 0,
+ FC_PARSE_FAILURE = 1,
+ FC_PARSE_BUSY = 2,
+ FC_PARSE_LEN_INVAL,
+ FC_PARSE_ACC_INVAL,
+ FC_PARSE_PWWN_NOT_EQUAL,
+ FC_PARSE_NWWN_NOT_EQUAL,
+ FC_PARSE_RXSZ_INVAL,
+ FC_PARSE_NOT_FCP,
+ FC_PARSE_OPAFLAG_INVAL,
+ FC_PARSE_RPAFLAG_INVAL,
+ FC_PARSE_OPA_INVAL,
+ FC_PARSE_RPA_INVAL,
+
+};
+
+struct fc_templates_s {
+ struct fchs_s fc_els_req;
+ struct fchs_s fc_bls_req;
+ struct fc_logi_s plogi;
+ struct fc_rrq_s rrq;
+};
+
+void fcbuild_init(void);
+
+u16 fc_flogi_build(struct fchs_s *fchs, struct fc_logi_s *flogi,
+ u32 s_id, u16 ox_id, wwn_t port_name,
+ wwn_t node_name, u16 pdu_size, u8 set_npiv,
+ u8 set_auth, u16 local_bb_credits);
+u16 fc_fdisc_build(struct fchs_s *buf, struct fc_logi_s *flogi,
+ u32 s_id, u16 ox_id, wwn_t port_name,
+ wwn_t node_name, u16 pdu_size);
+u16 fc_flogi_acc_build(struct fchs_s *fchs, struct fc_logi_s *flogi,
+ u32 s_id, u16 ox_id, wwn_t port_name,
+ wwn_t node_name, u16 pdu_size,
+ u16 local_bb_credits);
+u16 fc_plogi_build(struct fchs_s *fchs, void *pld, u32 d_id,
+ u32 s_id, u16 ox_id, wwn_t port_name,
+ wwn_t node_name, u16 pdu_size);
+enum fc_parse_status fc_plogi_parse(struct fchs_s *fchs);
+u16 fc_abts_build(struct fchs_s *buf, u32 d_id, u32 s_id,
+ u16 ox_id);
+enum fc_parse_status fc_abts_rsp_parse(struct fchs_s *buf, int len);
+u16 fc_rrq_build(struct fchs_s *buf, struct fc_rrq_s *rrq, u32 d_id,
+ u32 s_id, u16 ox_id, u16 rrq_oxid);
+enum fc_parse_status fc_rrq_rsp_parse(struct fchs_s *buf, int len);
+u16 fc_rspnid_build(struct fchs_s *fchs, void *pld, u32 s_id,
+ u16 ox_id, u8 *name);
+u16 fc_rftid_build(struct fchs_s *fchs, void *pld, u32 s_id,
+ u16 ox_id, enum bfa_port_role role);
+u16 fc_rftid_build_sol(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u16 ox_id, u8 *fc4_bitmap,
+ u32 bitmap_size);
+u16 fc_rffid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u16 ox_id, u8 fc4_type, u8 fc4_ftrs);
+u16 fc_gidpn_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u16 ox_id, wwn_t port_name);
+u16 fc_gpnid_build(struct fchs_s *fchs, void *pld, u32 s_id,
+ u16 ox_id, u32 port_id);
+u16 fc_scr_build(struct fchs_s *fchs, struct fc_scr_s *scr,
+ u8 set_br_reg, u32 s_id, u16 ox_id);
+u16 fc_plogi_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
+ u32 s_id, u16 ox_id,
+ wwn_t port_name, wwn_t node_name, u16 pdu_size);
+
+u16 fc_adisc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ wwn_t port_name, wwn_t node_name);
+enum fc_parse_status fc_adisc_parse(struct fchs_s *fchs, void *pld,
+ u32 host_dap,
+ wwn_t node_name, wwn_t port_name);
+enum fc_parse_status fc_adisc_rsp_parse(struct fc_adisc_s *adisc, int len,
+ wwn_t port_name, wwn_t node_name);
+u16 fc_adisc_acc_build(struct fchs_s *fchs, struct fc_adisc_s *adisc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ wwn_t port_name, wwn_t node_name);
+u16 fc_ls_rjt_build(struct fchs_s *fchs, struct fc_ls_rjt_s *ls_rjt,
+ u32 d_id, u32 s_id, u16 ox_id,
+ u8 reason_code, u8 reason_code_expl);
+u16 fc_ls_acc_build(struct fchs_s *fchs, struct fc_els_cmd_s *els_cmd,
+ u32 d_id, u32 s_id, u16 ox_id);
+u16 fc_prli_build(struct fchs_s *fchs, void *pld, u32 d_id,
+ u32 s_id, u16 ox_id);
+enum fc_parse_status fc_prli_rsp_parse(struct fc_prli_s *prli, int len);
+
+u16 fc_prli_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
+ u32 s_id, u16 ox_id,
+ enum bfa_port_role role);
+u16 fc_rnid_build(struct fchs_s *fchs, struct fc_rnid_cmd_s *rnid,
+ u32 d_id, u32 s_id, u16 ox_id,
+ u32 data_format);
+u16 fc_rnid_acc_build(struct fchs_s *fchs, struct fc_rnid_acc_s *rnid_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ u32 data_format,
+ struct fc_rnid_common_id_data_s *common_id_data,
+ struct fc_rnid_general_topology_data_s *
+ gen_topo_data);
+u16 fc_rpsc2_build(struct fchs_s *fchs, struct fc_rpsc2_cmd_s *rps2c,
+ u32 d_id, u32 s_id,
+ u32 *pid_list, u16 npids);
+u16 fc_rpsc_build(struct fchs_s *fchs, struct fc_rpsc_cmd_s *rpsc,
+ u32 d_id, u32 s_id, u16 ox_id);
+u16 fc_rpsc_acc_build(struct fchs_s *fchs, struct fc_rpsc_acc_s *rpsc_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ struct fc_rpsc_speed_info_s *oper_speed);
+u16 fc_gid_ft_build(struct fchs_s *fchs, void *pld, u32 s_id,
+ u8 fc4_type);
+u16 fc_rpnid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u32 port_id, wwn_t port_name);
+u16 fc_rnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u32 port_id, wwn_t node_name);
+u16 fc_rcsid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u32 port_id, u32 cos);
+u16 fc_rptid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u32 port_id, u8 port_type);
+u16 fc_ganxt_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u32 port_id);
+u16 fc_logo_build(struct fchs_s *fchs, struct fc_logo_s *logo,
+ u32 d_id, u32 s_id, u16 ox_id,
+ wwn_t port_name);
+u16 fc_logo_acc_build(struct fchs_s *fchs, void *pld, u32 d_id,
+ u32 s_id, u16 ox_id);
+u16 fc_fdmi_reqhdr_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u16 cmd_code);
+u16 fc_gmal_req_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ wwn_t wwn);
+u16 fc_gfn_req_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ wwn_t wwn);
+void fc_get_fc4type_bitmask(u8 fc4_type, u8 *bit_mask);
+void fc_els_req_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id);
+enum fc_parse_status fc_els_rsp_parse(struct fchs_s *fchs, int len);
+enum fc_parse_status fc_plogi_rsp_parse(struct fchs_s *fchs, int len,
+ wwn_t port_name);
+enum fc_parse_status fc_prli_parse(struct fc_prli_s *prli);
+enum fc_parse_status fc_pdisc_parse(struct fchs_s *fchs, wwn_t node_name,
+ wwn_t port_name);
+u16 fc_ba_acc_build(struct fchs_s *fchs, struct fc_ba_acc_s *ba_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ u16 rx_id);
+int fc_logout_params_pages(struct fchs_s *fc_frame, u8 els_code);
+u16 fc_tprlo_acc_build(struct fchs_s *fchs,
+ struct fc_tprlo_acc_s *tprlo_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ int num_pages);
+u16 fc_prlo_acc_build(struct fchs_s *fchs, struct fc_prlo_acc_s *prlo_acc,
+ u32 d_id, u32 s_id, u16 ox_id,
+ int num_pages);
+u16 fc_logo_rsp_parse(struct fchs_s *fchs, int len);
+u16 fc_pdisc_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id, wwn_t port_name, wwn_t node_name,
+ u16 pdu_size);
+u16 fc_pdisc_rsp_parse(struct fchs_s *fchs, int len, wwn_t port_name);
+u16 fc_prlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id, int num_pages);
+u16 fc_prlo_rsp_parse(struct fchs_s *fchs, int len);
+u16 fc_tprlo_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id, int num_pages,
+ enum fc_tprlo_type tprlo_type, u32 tpr_id);
+u16 fc_tprlo_rsp_parse(struct fchs_s *fchs, int len);
+u16 fc_ba_rjt_build(struct fchs_s *fchs, u32 d_id, u32 s_id,
+ u16 ox_id, u32 reason_code,
+ u32 reason_expl);
+u16 fc_gnnid_build(struct fchs_s *fchs, void *pyld, u32 s_id,
+ u16 ox_id, u32 port_id);
+u16 fc_ct_rsp_parse(struct ct_hdr_s *cthdr);
+u16 fc_rscn_build(struct fchs_s *fchs, struct fc_rscn_pl_s *rscn,
+ u32 s_id, u16 ox_id);
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcpim.c - FCP initiator mode i-t nexus state machine
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_fcpim.h"
+#include "fcs_rport.h"
+#include "fcs_lport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+#include <fcs/bfa_fcs_fcpim.h>
+#include <fcb/bfa_fcb_fcpim.h>
+#include <aen/bfa_aen_itnim.h>
+
+BFA_TRC_FILE(FCS, FCPIM);
+
+/*
+ * forward declarations
+ */
+static void bfa_fcs_itnim_timeout(void *arg);
+static void bfa_fcs_itnim_free(struct bfa_fcs_itnim_s *itnim);
+static void bfa_fcs_itnim_send_prli(void *itnim_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_itnim_prli_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_itnim_aen_post(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_itnim_aen_event event);
+
+/**
+ * fcs_itnim_sm FCS itnim state machine events
+ */
+
+enum bfa_fcs_itnim_event {
+ BFA_FCS_ITNIM_SM_ONLINE = 1, /* rport online event */
+ BFA_FCS_ITNIM_SM_OFFLINE = 2, /* rport offline */
+ BFA_FCS_ITNIM_SM_FRMSENT = 3, /* prli frame is sent */
+ BFA_FCS_ITNIM_SM_RSP_OK = 4, /* good response */
+ BFA_FCS_ITNIM_SM_RSP_ERROR = 5, /* error response */
+ BFA_FCS_ITNIM_SM_TIMEOUT = 6, /* delay timeout */
+ BFA_FCS_ITNIM_SM_HCB_OFFLINE = 7, /* BFA online callback */
+ BFA_FCS_ITNIM_SM_HCB_ONLINE = 8, /* BFA offline callback */
+ BFA_FCS_ITNIM_SM_INITIATOR = 9, /* rport is initiator */
+ BFA_FCS_ITNIM_SM_DELETE = 10, /* delete event from rport */
+ BFA_FCS_ITNIM_SM_PRLO = 11, /* delete event from rport */
+};
+
+static void bfa_fcs_itnim_sm_offline(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event);
+static void bfa_fcs_itnim_sm_prli_send(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event);
+static void bfa_fcs_itnim_sm_prli(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event);
+static void bfa_fcs_itnim_sm_prli_retry(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event);
+static void bfa_fcs_itnim_sm_hcb_online(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event);
+static void bfa_fcs_itnim_sm_online(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event);
+static void bfa_fcs_itnim_sm_hcb_offline(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event);
+static void bfa_fcs_itnim_sm_initiator(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event);
+
+static struct bfa_sm_table_s itnim_sm_table[] = {
+ {BFA_SM(bfa_fcs_itnim_sm_offline), BFA_ITNIM_OFFLINE},
+ {BFA_SM(bfa_fcs_itnim_sm_prli_send), BFA_ITNIM_PRLI_SEND},
+ {BFA_SM(bfa_fcs_itnim_sm_prli), BFA_ITNIM_PRLI_SENT},
+ {BFA_SM(bfa_fcs_itnim_sm_prli_retry), BFA_ITNIM_PRLI_RETRY},
+ {BFA_SM(bfa_fcs_itnim_sm_hcb_online), BFA_ITNIM_HCB_ONLINE},
+ {BFA_SM(bfa_fcs_itnim_sm_online), BFA_ITNIM_ONLINE},
+ {BFA_SM(bfa_fcs_itnim_sm_hcb_offline), BFA_ITNIM_HCB_OFFLINE},
+ {BFA_SM(bfa_fcs_itnim_sm_initiator), BFA_ITNIM_INITIATIOR},
+};
+
+/**
+ * fcs_itnim_sm FCS itnim state machine
+ */
+
+static void
+bfa_fcs_itnim_sm_offline(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_trc(itnim->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_ITNIM_SM_ONLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_prli_send);
+ bfa_fcs_itnim_send_prli(itnim, NULL);
+ break;
+
+ case BFA_FCS_ITNIM_SM_OFFLINE:
+ bfa_fcs_rport_itnim_ack(itnim->rport);
+ break;
+
+ case BFA_FCS_ITNIM_SM_INITIATOR:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_initiator);
+ break;
+
+ case BFA_FCS_ITNIM_SM_DELETE:
+ bfa_fcs_itnim_free(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+
+}
+
+static void
+bfa_fcs_itnim_sm_prli_send(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_trc(itnim->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_ITNIM_SM_FRMSENT:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_prli);
+ break;
+
+ case BFA_FCS_ITNIM_SM_INITIATOR:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_initiator);
+ bfa_fcxp_walloc_cancel(itnim->fcs->bfa, &itnim->fcxp_wqe);
+ break;
+
+ case BFA_FCS_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcxp_walloc_cancel(itnim->fcs->bfa, &itnim->fcxp_wqe);
+ bfa_fcs_rport_itnim_ack(itnim->rport);
+ break;
+
+ case BFA_FCS_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcxp_walloc_cancel(itnim->fcs->bfa, &itnim->fcxp_wqe);
+ bfa_fcs_itnim_free(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_itnim_sm_prli(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_trc(itnim->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_ITNIM_SM_RSP_OK:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_hcb_online);
+ bfa_itnim_online(itnim->bfa_itnim, itnim->seq_rec);
+ break;
+
+ case BFA_FCS_ITNIM_SM_RSP_ERROR:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_prli_retry);
+ bfa_timer_start(itnim->fcs->bfa, &itnim->timer,
+ bfa_fcs_itnim_timeout, itnim,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case BFA_FCS_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcxp_discard(itnim->fcxp);
+ bfa_fcs_rport_itnim_ack(itnim->rport);
+ break;
+
+ case BFA_FCS_ITNIM_SM_INITIATOR:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_initiator);
+ /*
+ * dont discard fcxp. accept will reach same state
+ */
+ break;
+
+ case BFA_FCS_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcxp_discard(itnim->fcxp);
+ bfa_fcs_itnim_free(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_itnim_sm_prli_retry(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_trc(itnim->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_ITNIM_SM_TIMEOUT:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_prli_send);
+ bfa_fcs_itnim_send_prli(itnim, NULL);
+ break;
+
+ case BFA_FCS_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_timer_stop(&itnim->timer);
+ bfa_fcs_rport_itnim_ack(itnim->rport);
+ break;
+
+ case BFA_FCS_ITNIM_SM_INITIATOR:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_initiator);
+ bfa_timer_stop(&itnim->timer);
+ break;
+
+ case BFA_FCS_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_timer_stop(&itnim->timer);
+ bfa_fcs_itnim_free(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_itnim_sm_hcb_online(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_trc(itnim->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_ITNIM_SM_HCB_ONLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_online);
+ bfa_fcb_itnim_online(itnim->itnim_drv);
+ bfa_fcs_itnim_aen_post(itnim, BFA_ITNIM_AEN_ONLINE);
+ break;
+
+ case BFA_FCS_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_itnim_offline(itnim->bfa_itnim);
+ bfa_fcs_rport_itnim_ack(itnim->rport);
+ break;
+
+ case BFA_FCS_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcs_itnim_free(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_itnim_sm_online(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_trc(itnim->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_hcb_offline);
+ bfa_fcb_itnim_offline(itnim->itnim_drv);
+ bfa_itnim_offline(itnim->bfa_itnim);
+ if (bfa_fcs_port_is_online(itnim->rport->port) == BFA_TRUE) {
+ bfa_fcs_itnim_aen_post(itnim, BFA_ITNIM_AEN_DISCONNECT);
+ } else {
+ bfa_fcs_itnim_aen_post(itnim, BFA_ITNIM_AEN_OFFLINE);
+ }
+ break;
+
+ case BFA_FCS_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcs_itnim_free(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_itnim_sm_hcb_offline(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_trc(itnim->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_ITNIM_SM_HCB_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcs_rport_itnim_ack(itnim->rport);
+ break;
+
+ case BFA_FCS_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcs_itnim_free(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/*
+ * This state is set when a discovered rport is also in intiator mode.
+ * This ITN is marked as no_op and is not active and will not be truned into
+ * online state.
+ */
+static void
+bfa_fcs_itnim_sm_initiator(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_fcs_itnim_event event)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_trc(itnim->fcs, event);
+
+ switch (event) {
+ case BFA_FCS_ITNIM_SM_OFFLINE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcs_rport_itnim_ack(itnim->rport);
+ break;
+
+ case BFA_FCS_ITNIM_SM_RSP_ERROR:
+ case BFA_FCS_ITNIM_SM_ONLINE:
+ case BFA_FCS_ITNIM_SM_INITIATOR:
+ break;
+
+ case BFA_FCS_ITNIM_SM_DELETE:
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+ bfa_fcs_itnim_free(itnim);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * itnim_private FCS ITNIM private interfaces
+ */
+
+static void
+bfa_fcs_itnim_aen_post(struct bfa_fcs_itnim_s *itnim,
+ enum bfa_itnim_aen_event event)
+{
+ struct bfa_fcs_rport_s *rport = itnim->rport;
+ union bfa_aen_data_u aen_data;
+ struct bfa_log_mod_s *logmod = rport->fcs->logm;
+ wwn_t lpwwn = bfa_fcs_port_get_pwwn(rport->port);
+ wwn_t rpwwn = rport->pwwn;
+ char lpwwn_ptr[BFA_STRING_32];
+ char rpwwn_ptr[BFA_STRING_32];
+
+ /*
+ * Don't post events for well known addresses
+ */
+ if (BFA_FCS_PID_IS_WKA(rport->pid))
+ return;
+
+ wwn2str(lpwwn_ptr, lpwwn);
+ wwn2str(rpwwn_ptr, rpwwn);
+
+ switch (event) {
+ case BFA_ITNIM_AEN_ONLINE:
+ bfa_log(logmod, BFA_AEN_ITNIM_ONLINE, rpwwn_ptr, lpwwn_ptr);
+ break;
+ case BFA_ITNIM_AEN_OFFLINE:
+ bfa_log(logmod, BFA_AEN_ITNIM_OFFLINE, rpwwn_ptr, lpwwn_ptr);
+ break;
+ case BFA_ITNIM_AEN_DISCONNECT:
+ bfa_log(logmod, BFA_AEN_ITNIM_DISCONNECT, rpwwn_ptr, lpwwn_ptr);
+ break;
+ default:
+ break;
+ }
+
+ aen_data.itnim.vf_id = rport->port->fabric->vf_id;
+ aen_data.itnim.ppwwn =
+ bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(itnim->fcs));
+ aen_data.itnim.lpwwn = lpwwn;
+ aen_data.itnim.rpwwn = rpwwn;
+}
+
+static void
+bfa_fcs_itnim_send_prli(void *itnim_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_itnim_s *itnim = itnim_cbarg;
+ struct bfa_fcs_rport_s *rport = itnim->rport;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ int len;
+
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ itnim->stats.fcxp_alloc_wait++;
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &itnim->fcxp_wqe,
+ bfa_fcs_itnim_send_prli, itnim);
+ return;
+ }
+ itnim->fcxp = fcxp;
+
+ len = fc_prli_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), itnim->rport->pid,
+ bfa_fcs_port_get_fcid(port), 0);
+
+ bfa_fcxp_send(fcxp, rport->bfa_rport, port->fabric->vf_id, port->lp_tag,
+ BFA_FALSE, FC_CLASS_3, len, &fchs,
+ bfa_fcs_itnim_prli_response, (void *)itnim, FC_MAX_PDUSZ,
+ FC_RA_TOV);
+
+ itnim->stats.prli_sent++;
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_FRMSENT);
+}
+
+static void
+bfa_fcs_itnim_prli_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t req_status, u32 rsp_len,
+ u32 resid_len, struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cbarg;
+ struct fc_els_cmd_s *els_cmd;
+ struct fc_prli_s *prli_resp;
+ struct fc_ls_rjt_s *ls_rjt;
+ struct fc_prli_params_s *sparams;
+
+ bfa_trc(itnim->fcs, req_status);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ itnim->stats.prli_rsp_err++;
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_RSP_ERROR);
+ return;
+ }
+
+ els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ if (els_cmd->els_code == FC_ELS_ACC) {
+ prli_resp = (struct fc_prli_s *) els_cmd;
+
+ if (fc_prli_rsp_parse(prli_resp, rsp_len) != FC_PARSE_OK) {
+ bfa_trc(itnim->fcs, rsp_len);
+ /*
+ * Check if this r-port is also in Initiator mode.
+ * If so, we need to set this ITN as a no-op.
+ */
+ if (prli_resp->parampage.servparams.initiator) {
+ bfa_trc(itnim->fcs, prli_resp->parampage.type);
+ itnim->rport->scsi_function =
+ BFA_RPORT_INITIATOR;
+ itnim->stats.prli_rsp_acc++;
+ bfa_sm_send_event(itnim,
+ BFA_FCS_ITNIM_SM_INITIATOR);
+ return;
+ }
+
+ itnim->stats.prli_rsp_parse_err++;
+ return;
+ }
+ itnim->rport->scsi_function = BFA_RPORT_TARGET;
+
+ sparams = &prli_resp->parampage.servparams;
+ itnim->seq_rec = sparams->retry;
+ itnim->rec_support = sparams->rec_support;
+ itnim->task_retry_id = sparams->task_retry_id;
+ itnim->conf_comp = sparams->confirm;
+
+ itnim->stats.prli_rsp_acc++;
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_RSP_OK);
+ } else {
+ ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ bfa_trc(itnim->fcs, ls_rjt->reason_code);
+ bfa_trc(itnim->fcs, ls_rjt->reason_code_expl);
+
+ itnim->stats.prli_rsp_rjt++;
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_RSP_ERROR);
+ }
+}
+
+static void
+bfa_fcs_itnim_timeout(void *arg)
+{
+ struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)arg;
+
+ itnim->stats.timeout++;
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_TIMEOUT);
+}
+
+static void
+bfa_fcs_itnim_free(struct bfa_fcs_itnim_s *itnim)
+{
+ bfa_itnim_delete(itnim->bfa_itnim);
+ bfa_fcb_itnim_free(itnim->fcs->bfad, itnim->itnim_drv);
+}
+
+
+
+/**
+ * itnim_public FCS ITNIM public interfaces
+ */
+
+/**
+ * Called by rport when a new rport is created.
+ *
+ * @param[in] rport - remote port.
+ */
+struct bfa_fcs_itnim_s *
+bfa_fcs_itnim_create(struct bfa_fcs_rport_s *rport)
+{
+ struct bfa_fcs_port_s *port = rport->port;
+ struct bfa_fcs_itnim_s *itnim;
+ struct bfad_itnim_s *itnim_drv;
+ struct bfa_itnim_s *bfa_itnim;
+
+ /*
+ * call bfad to allocate the itnim
+ */
+ bfa_fcb_itnim_alloc(port->fcs->bfad, &itnim, &itnim_drv);
+ if (itnim == NULL) {
+ bfa_trc(port->fcs, rport->pwwn);
+ return NULL;
+ }
+
+ /*
+ * Initialize itnim
+ */
+ itnim->rport = rport;
+ itnim->fcs = rport->fcs;
+ itnim->itnim_drv = itnim_drv;
+
+ /*
+ * call BFA to create the itnim
+ */
+ bfa_itnim = bfa_itnim_create(port->fcs->bfa, rport->bfa_rport, itnim);
+
+ if (bfa_itnim == NULL) {
+ bfa_trc(port->fcs, rport->pwwn);
+ bfa_fcb_itnim_free(port->fcs->bfad, itnim_drv);
+ bfa_assert(0);
+ return NULL;
+ }
+
+ itnim->bfa_itnim = bfa_itnim;
+ itnim->seq_rec = BFA_FALSE;
+ itnim->rec_support = BFA_FALSE;
+ itnim->conf_comp = BFA_FALSE;
+ itnim->task_retry_id = BFA_FALSE;
+
+ /*
+ * Set State machine
+ */
+ bfa_sm_set_state(itnim, bfa_fcs_itnim_sm_offline);
+
+ return itnim;
+}
+
+/**
+ * Called by rport to delete the instance of FCPIM.
+ *
+ * @param[in] rport - remote port.
+ */
+void
+bfa_fcs_itnim_delete(struct bfa_fcs_itnim_s *itnim)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pid);
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_DELETE);
+}
+
+/**
+ * Notification from rport that PLOGI is complete to initiate FC-4 session.
+ */
+void
+bfa_fcs_itnim_rport_online(struct bfa_fcs_itnim_s *itnim)
+{
+ itnim->stats.onlines++;
+
+ if (!BFA_FCS_PID_IS_WKA(itnim->rport->pid)) {
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_ONLINE);
+ } else {
+ /*
+ * For well known addresses, we set the itnim to initiator
+ * state
+ */
+ itnim->stats.initiator++;
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_INITIATOR);
+ }
+}
+
+/**
+ * Called by rport to handle a remote device offline.
+ */
+void
+bfa_fcs_itnim_rport_offline(struct bfa_fcs_itnim_s *itnim)
+{
+ itnim->stats.offlines++;
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_OFFLINE);
+}
+
+/**
+ * Called by rport when remote port is known to be an initiator from
+ * PRLI received.
+ */
+void
+bfa_fcs_itnim_is_initiator(struct bfa_fcs_itnim_s *itnim)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pid);
+ itnim->stats.initiator++;
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_INITIATOR);
+}
+
+/**
+ * Called by rport to check if the itnim is online.
+ */
+bfa_status_t
+bfa_fcs_itnim_get_online_state(struct bfa_fcs_itnim_s *itnim)
+{
+ bfa_trc(itnim->fcs, itnim->rport->pid);
+ switch (bfa_sm_to_state(itnim_sm_table, itnim->sm)) {
+ case BFA_ITNIM_ONLINE:
+ case BFA_ITNIM_INITIATIOR:
+ return BFA_STATUS_OK;
+
+ default:
+ return BFA_STATUS_NO_FCPIM_NEXUS;
+
+ }
+}
+
+/**
+ * BFA completion callback for bfa_itnim_online().
+ */
+void
+bfa_cb_itnim_online(void *cbarg)
+{
+ struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cbarg;
+
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_HCB_ONLINE);
+}
+
+/**
+ * BFA completion callback for bfa_itnim_offline().
+ */
+void
+bfa_cb_itnim_offline(void *cb_arg)
+{
+ struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
+
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_HCB_OFFLINE);
+}
+
+/**
+ * Mark the beginning of PATH TOV handling. IO completion callbacks
+ * are still pending.
+ */
+void
+bfa_cb_itnim_tov_begin(void *cb_arg)
+{
+ struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
+
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_fcb_itnim_tov_begin(itnim->itnim_drv);
+}
+
+/**
+ * Mark the end of PATH TOV handling. All pending IOs are already cleaned up.
+ */
+void
+bfa_cb_itnim_tov(void *cb_arg)
+{
+ struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
+
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_fcb_itnim_tov(itnim->itnim_drv);
+}
+
+/**
+ * BFA notification to FCS/driver for second level error recovery.
+ *
+ * Atleast one I/O request has timedout and target is unresponsive to
+ * repeated abort requests. Second level error recovery should be initiated
+ * by starting implicit logout and recovery procedures.
+ */
+void
+bfa_cb_itnim_sler(void *cb_arg)
+{
+ struct bfa_fcs_itnim_s *itnim = (struct bfa_fcs_itnim_s *)cb_arg;
+
+ itnim->stats.sler++;
+ bfa_trc(itnim->fcs, itnim->rport->pwwn);
+ bfa_fcs_rport_logo_imp(itnim->rport);
+}
+
+struct bfa_fcs_itnim_s *
+bfa_fcs_itnim_lookup(struct bfa_fcs_port_s *port, wwn_t rpwwn)
+{
+ struct bfa_fcs_rport_s *rport;
+ rport = bfa_fcs_rport_lookup(port, rpwwn);
+
+ if (!rport)
+ return NULL;
+
+ bfa_assert(rport->itnim != NULL);
+ return (rport->itnim);
+}
+
+bfa_status_t
+bfa_fcs_itnim_attr_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+ struct bfa_itnim_attr_s *attr)
+{
+ struct bfa_fcs_itnim_s *itnim = NULL;
+
+ itnim = bfa_fcs_itnim_lookup(port, rpwwn);
+
+ if (itnim == NULL)
+ return BFA_STATUS_NO_FCPIM_NEXUS;
+
+ attr->state = bfa_sm_to_state(itnim_sm_table, itnim->sm);
+ attr->retry = itnim->seq_rec;
+ attr->rec_support = itnim->rec_support;
+ attr->conf_comp = itnim->conf_comp;
+ attr->task_retry_id = itnim->task_retry_id;
+
+ return BFA_STATUS_OK;
+}
+
+bfa_status_t
+bfa_fcs_itnim_stats_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+ struct bfa_itnim_stats_s *stats)
+{
+ struct bfa_fcs_itnim_s *itnim = NULL;
+
+ bfa_assert(port != NULL);
+
+ itnim = bfa_fcs_itnim_lookup(port, rpwwn);
+
+ if (itnim == NULL)
+ return BFA_STATUS_NO_FCPIM_NEXUS;
+
+ bfa_os_memcpy(stats, &itnim->stats, sizeof(struct bfa_itnim_stats_s));
+
+ return BFA_STATUS_OK;
+}
+
+bfa_status_t
+bfa_fcs_itnim_stats_clear(struct bfa_fcs_port_s *port, wwn_t rpwwn)
+{
+ struct bfa_fcs_itnim_s *itnim = NULL;
+
+ bfa_assert(port != NULL);
+
+ itnim = bfa_fcs_itnim_lookup(port, rpwwn);
+
+ if (itnim == NULL)
+ return BFA_STATUS_NO_FCPIM_NEXUS;
+
+ bfa_os_memset(&itnim->stats, 0, sizeof(struct bfa_itnim_stats_s));
+ return BFA_STATUS_OK;
+}
+
+void
+bfa_fcs_fcpim_uf_recv(struct bfa_fcs_itnim_s *itnim, struct fchs_s *fchs,
+ u16 len)
+{
+ struct fc_els_cmd_s *els_cmd;
+
+ bfa_trc(itnim->fcs, fchs->type);
+
+ if (fchs->type != FC_TYPE_ELS)
+ return;
+
+ els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+ bfa_trc(itnim->fcs, els_cmd->els_code);
+
+ switch (els_cmd->els_code) {
+ case FC_ELS_PRLO:
+ /* bfa_sm_send_event(itnim, BFA_FCS_ITNIM_SM_PRLO); */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+void
+bfa_fcs_itnim_pause(struct bfa_fcs_itnim_s *itnim)
+{
+}
+
+void
+bfa_fcs_itnim_resume(struct bfa_fcs_itnim_s *itnim)
+{
+}
+
+/**
+ * Module initialization
+ */
+void
+bfa_fcs_fcpim_modinit(struct bfa_fcs_s *fcs)
+{
+}
+
+/**
+ * Module cleanup
+ */
+void
+bfa_fcs_fcpim_modexit(struct bfa_fcs_s *fcs)
+{
+ bfa_fcs_modexit_comp(fcs);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * This file contains dummy FCPTM routines to aid in Initiator Mode only
+ * compilation of OS driver.
+ *
+ */
+
+#include "bfa_os_inc.h"
+#include "fcs_rport.h"
+#include "fcs_fcptm.h"
+#include "fcs/bfa_fcs_rport.h"
+
+struct bfa_fcs_tin_s *
+bfa_fcs_tin_create(struct bfa_fcs_rport_s *rport)
+{
+ return NULL;
+}
+
+void
+bfa_fcs_tin_delete(struct bfa_fcs_tin_s *tin)
+{
+}
+
+void
+bfa_fcs_tin_rport_offline(struct bfa_fcs_tin_s *tin)
+{
+}
+
+void
+bfa_fcs_tin_rport_online(struct bfa_fcs_tin_s *tin)
+{
+}
+
+void
+bfa_fcs_tin_rx_prli(struct bfa_fcs_tin_s *tin, struct fchs_s *fchs, u16 len)
+{
+}
+
+void
+bfa_fcs_fcptm_uf_recv(struct bfa_fcs_tin_s *tin, struct fchs_s *fchs, u16 len)
+{
+}
+
+void
+bfa_fcs_tin_pause(struct bfa_fcs_tin_s *tin)
+{
+}
+
+void
+bfa_fcs_tin_resume(struct bfa_fcs_tin_s *tin)
+{
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs.h FCS module functions
+ */
+
+
+#ifndef __FCS_H__
+#define __FCS_H__
+
+#define __fcs_min_cfg(__fcs) (__fcs)->min_cfg
+
+void bfa_fcs_modexit_comp(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_uf.h FCS unsolicited frame receive
+ */
+
+
+#ifndef __FCS_AUTH_H__
+#define __FCS_AUTH_H__
+
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_vport.h>
+#include <fcs/bfa_fcs_lport.h>
+
+/*
+ * fcs friend functions: only between fcs modules
+ */
+void bfa_fcs_auth_uf_recv(struct bfa_fcs_fabric_s *fabric, int len);
+void bfa_fcs_auth_start(struct bfa_fcs_fabric_s *fabric);
+void bfa_fcs_auth_stop(struct bfa_fcs_fabric_s *fabric);
+
+#endif /* __FCS_UF_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_lport.h FCS logical port interfaces
+ */
+
+#ifndef __FCS_FABRIC_H__
+#define __FCS_FABRIC_H__
+
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_vport.h>
+#include <fcs/bfa_fcs_lport.h>
+
+/*
+* fcs friend functions: only between fcs modules
+ */
+void bfa_fcs_fabric_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fabric_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fabric_modsusp(struct bfa_fcs_s *fcs);
+void bfa_fcs_fabric_link_up(struct bfa_fcs_fabric_s *fabric);
+void bfa_fcs_fabric_link_down(struct bfa_fcs_fabric_s *fabric);
+void bfa_fcs_fabric_addvport(struct bfa_fcs_fabric_s *fabric,
+ struct bfa_fcs_vport_s *vport);
+void bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric,
+ struct bfa_fcs_vport_s *vport);
+int bfa_fcs_fabric_is_online(struct bfa_fcs_fabric_s *fabric);
+struct bfa_fcs_vport_s *bfa_fcs_fabric_vport_lookup(
+ struct bfa_fcs_fabric_s *fabric, wwn_t pwwn);
+void bfa_fcs_fabric_modstart(struct bfa_fcs_s *fcs);
+void bfa_fcs_fabric_uf_recv(struct bfa_fcs_fabric_s *fabric,
+ struct fchs_s *fchs, u16 len);
+u16 bfa_fcs_fabric_vport_count(struct bfa_fcs_fabric_s *fabric);
+bfa_boolean_t bfa_fcs_fabric_is_loopback(struct bfa_fcs_fabric_s *fabric);
+enum bfa_pport_type bfa_fcs_fabric_port_type(struct bfa_fcs_fabric_s *fabric);
+void bfa_fcs_fabric_psymb_init(struct bfa_fcs_fabric_s *fabric);
+void bfa_fcs_fabric_port_delete_comp(struct bfa_fcs_fabric_s *fabric);
+
+bfa_status_t bfa_fcs_fabric_addvf(struct bfa_fcs_fabric_s *vf,
+ struct bfa_fcs_s *fcs, struct bfa_port_cfg_s *port_cfg,
+ struct bfad_vf_s *vf_drv);
+void bfa_fcs_auth_finished(struct bfa_fcs_fabric_s *fabric,
+ enum auth_status status);
+
+void bfa_fcs_fabric_set_fabric_name(struct bfa_fcs_fabric_s *fabric,
+ wwn_t fabric_name);
+#endif /* __FCS_FABRIC_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __FCS_FCPIM_H__
+#define __FCS_FCPIM_H__
+
+#include <defs/bfa_defs_port.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+
+/*
+ * Following routines are from FCPIM and will be called by rport.
+ */
+struct bfa_fcs_itnim_s *bfa_fcs_itnim_create(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_itnim_delete(struct bfa_fcs_itnim_s *itnim);
+void bfa_fcs_itnim_rport_offline(struct bfa_fcs_itnim_s *itnim);
+void bfa_fcs_itnim_rport_online(struct bfa_fcs_itnim_s *itnim);
+bfa_status_t bfa_fcs_itnim_get_online_state(struct bfa_fcs_itnim_s *itnim);
+
+void bfa_fcs_itnim_is_initiator(struct bfa_fcs_itnim_s *itnim);
+void bfa_fcs_itnim_pause(struct bfa_fcs_itnim_s *itnim);
+void bfa_fcs_itnim_resume(struct bfa_fcs_itnim_s *itnim);
+
+/*
+ * Modudle init/cleanup routines.
+ */
+void bfa_fcs_fcpim_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fcpim_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fcpim_uf_recv(struct bfa_fcs_itnim_s *itnim, struct fchs_s *fchs,
+ u16 len);
+#endif /* __FCS_FCPIM_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FCS_FCPTM_H__
+#define __FCS_FCPTM_H__
+
+#include <defs/bfa_defs_port.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+
+/*
+ * Following routines are from FCPTM and will be called by rport.
+ */
+struct bfa_fcs_tin_s *bfa_fcs_tin_create(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_tin_rport_offline(struct bfa_fcs_tin_s *tin);
+void bfa_fcs_tin_rport_online(struct bfa_fcs_tin_s *tin);
+void bfa_fcs_tin_delete(struct bfa_fcs_tin_s *tin);
+void bfa_fcs_tin_rx_prli(struct bfa_fcs_tin_s *tin, struct fchs_s *fchs,
+ u16 len);
+void bfa_fcs_tin_pause(struct bfa_fcs_tin_s *tin);
+void bfa_fcs_tin_resume(struct bfa_fcs_tin_s *tin);
+
+/*
+ * Modudle init/cleanup routines.
+ */
+void bfa_fcs_fcptm_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fcptm_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_fcptm_uf_recv(struct bfa_fcs_tin_s *tin, struct fchs_s *fchs,
+ u16 len);
+
+#endif /* __FCS_FCPTM_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_fcxp.h FCXP helper macros for FCS
+ */
+
+
+#ifndef __FCS_FCXP_H__
+#define __FCS_FCXP_H__
+
+#define bfa_fcs_fcxp_alloc(__fcs) \
+ bfa_fcxp_alloc(NULL, (__fcs)->bfa, 0, 0, NULL, NULL, NULL, NULL)
+
+#endif /* __FCS_FCXP_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_lport.h FCS logical port interfaces
+ */
+
+#ifndef __FCS_LPORT_H__
+#define __FCS_LPORT_H__
+
+#define __VPORT_H__
+#include <defs/bfa_defs_port.h>
+#include <bfa_svc.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <fcs/bfa_fcs_vport.h>
+#include <fcs_fabric.h>
+#include <fcs_ms.h>
+#include <cs/bfa_q.h>
+#include <fcbuild.h>
+
+/*
+ * PID used in P2P/N2N ( In Big Endian)
+ */
+#define N2N_LOCAL_PID 0x010000
+#define N2N_REMOTE_PID 0x020000
+
+/*
+ * Misc Timeouts
+ */
+/*
+ * To be used when spawning a timer before retrying a failed command. Milli
+ * Secs.
+ */
+#define BFA_FCS_RETRY_TIMEOUT 2000
+
+/*
+ * Check for Port/Vport Mode/Role
+ */
+#define BFA_FCS_VPORT_IS_INITIATOR_MODE(port) \
+ (port->port_cfg.roles & BFA_PORT_ROLE_FCP_IM)
+
+#define BFA_FCS_VPORT_IS_TARGET_MODE(port) \
+ (port->port_cfg.roles & BFA_PORT_ROLE_FCP_TM)
+
+#define BFA_FCS_VPORT_IS_IPFC_MODE(port) \
+ (port->port_cfg.roles & BFA_PORT_ROLE_FCP_IPFC)
+
+/*
+ * Is this a Well Known Address
+ */
+#define BFA_FCS_PID_IS_WKA(pid) ((bfa_os_ntoh3b(pid) > 0xFFF000) ? 1 : 0)
+
+/*
+ * Pointer to elements within Port
+ */
+#define BFA_FCS_GET_HAL_FROM_PORT(port) (port->fcs->bfa)
+#define BFA_FCS_GET_NS_FROM_PORT(port) (&port->port_topo.pfab.ns)
+#define BFA_FCS_GET_SCN_FROM_PORT(port) (&port->port_topo.pfab.scn)
+#define BFA_FCS_GET_MS_FROM_PORT(port) (&port->port_topo.pfab.ms)
+#define BFA_FCS_GET_FDMI_FROM_PORT(port) (&port->port_topo.pfab.ms.fdmi)
+
+/*
+ * handler for unsolicied frames
+ */
+void bfa_fcs_port_uf_recv(struct bfa_fcs_port_s *lport, struct fchs_s *fchs,
+ u16 len);
+
+/*
+ * Following routines will be called by Fabric to indicate port
+ * online/offline to vport.
+ */
+void bfa_fcs_lport_init(struct bfa_fcs_port_s *lport, struct bfa_fcs_s *fcs,
+ u16 vf_id, struct bfa_port_cfg_s *port_cfg,
+ struct bfa_fcs_vport_s *vport);
+void bfa_fcs_port_online(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_offline(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_delete(struct bfa_fcs_port_s *port);
+bfa_boolean_t bfa_fcs_port_is_online(struct bfa_fcs_port_s *port);
+
+/*
+ * Lookup rport based on PID
+ */
+struct bfa_fcs_rport_s *bfa_fcs_port_get_rport_by_pid(
+ struct bfa_fcs_port_s *port, u32 pid);
+
+/*
+ * Lookup rport based on PWWN
+ */
+struct bfa_fcs_rport_s *bfa_fcs_port_get_rport_by_pwwn(
+ struct bfa_fcs_port_s *port, wwn_t pwwn);
+struct bfa_fcs_rport_s *bfa_fcs_port_get_rport_by_nwwn(
+ struct bfa_fcs_port_s *port, wwn_t nwwn);
+void bfa_fcs_port_add_rport(struct bfa_fcs_port_s *port,
+ struct bfa_fcs_rport_s *rport);
+void bfa_fcs_port_del_rport(struct bfa_fcs_port_s *port,
+ struct bfa_fcs_rport_s *rport);
+
+void bfa_fcs_port_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_port_modexit(struct bfa_fcs_s *fcs);
+void bfa_fcs_port_lip(struct bfa_fcs_port_s *port);
+
+#endif /* __FCS_LPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_ms.h FCS ms interfaces
+ */
+#ifndef __FCS_MS_H__
+#define __FCS_MS_H__
+
+/* MS FCS routines */
+void bfa_fcs_port_ms_init(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_ms_offline(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_ms_online(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_ms_fabric_rscn(struct bfa_fcs_port_s *port);
+
+/* FDMI FCS routines */
+void bfa_fcs_port_fdmi_init(struct bfa_fcs_port_ms_s *ms);
+void bfa_fcs_port_fdmi_offline(struct bfa_fcs_port_ms_s *ms);
+void bfa_fcs_port_fdmi_online(struct bfa_fcs_port_ms_s *ms);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_pport.h FCS physical port interfaces
+ */
+
+
+#ifndef __FCS_PPORT_H__
+#define __FCS_PPORT_H__
+
+/*
+ * fcs friend functions: only between fcs modules
+ */
+void bfa_fcs_pport_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_pport_modexit(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_PPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_rport.h FCS rport interfaces and defines
+ */
+
+#ifndef __FCS_RPORT_H__
+#define __FCS_RPORT_H__
+
+#include <fcs/bfa_fcs_rport.h>
+
+void bfa_fcs_rport_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_rport_modexit(struct bfa_fcs_s *fcs);
+
+void bfa_fcs_rport_uf_recv(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs,
+ u16 len);
+void bfa_fcs_rport_scn(struct bfa_fcs_rport_s *rport);
+
+struct bfa_fcs_rport_s *bfa_fcs_rport_create(struct bfa_fcs_port_s *port,
+ u32 pid);
+void bfa_fcs_rport_delete(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_online(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_offline(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_start(struct bfa_fcs_port_s *port, struct fchs_s *rx_fchs,
+ struct fc_logi_s *plogi_rsp);
+void bfa_fcs_rport_plogi_create(struct bfa_fcs_port_s *port,
+ struct fchs_s *rx_fchs,
+ struct fc_logi_s *plogi);
+void bfa_fcs_rport_plogi(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs,
+ struct fc_logi_s *plogi);
+void bfa_fcs_rport_logo_imp(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_itnim_ack(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_itntm_ack(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_tin_ack(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_fcptm_offline_done(struct bfa_fcs_rport_s *rport);
+int bfa_fcs_rport_get_state(struct bfa_fcs_rport_s *rport);
+struct bfa_fcs_rport_s *bfa_fcs_rport_create_by_wwn(struct bfa_fcs_port_s *port,
+ wwn_t wwn);
+
+
+/* Rport Features */
+void bfa_fcs_rpf_init(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rpf_rport_online(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rpf_rport_offline(struct bfa_fcs_rport_s *rport);
+
+#endif /* __FCS_RPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_trcmod.h BFA FCS trace modules
+ */
+
+#ifndef __FCS_TRCMOD_H__
+#define __FCS_TRCMOD_H__
+
+#include <cs/bfa_trc.h>
+
+/*
+ * !!! Only append to the enums defined here to avoid any versioning
+ * !!! needed between trace utility and driver version
+ */
+enum {
+ BFA_TRC_FCS_FABRIC = 1,
+ BFA_TRC_FCS_VFAPI = 2,
+ BFA_TRC_FCS_PORT = 3,
+ BFA_TRC_FCS_VPORT = 4,
+ BFA_TRC_FCS_VP_API = 5,
+ BFA_TRC_FCS_VPS = 6,
+ BFA_TRC_FCS_RPORT = 7,
+ BFA_TRC_FCS_FCPIM = 8,
+ BFA_TRC_FCS_FCPTM = 9,
+ BFA_TRC_FCS_NS = 10,
+ BFA_TRC_FCS_SCN = 11,
+ BFA_TRC_FCS_LOOP = 12,
+ BFA_TRC_FCS_UF = 13,
+ BFA_TRC_FCS_PPORT = 14,
+ BFA_TRC_FCS_FCPIP = 15,
+ BFA_TRC_FCS_PORT_API = 16,
+ BFA_TRC_FCS_RPORT_API = 17,
+ BFA_TRC_FCS_AUTH = 18,
+ BFA_TRC_FCS_N2N = 19,
+ BFA_TRC_FCS_MS = 20,
+ BFA_TRC_FCS_FDMI = 21,
+ BFA_TRC_FCS_RPORT_FTRS = 22,
+};
+
+#endif /* __FCS_TRCMOD_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * fcs_uf.h FCS unsolicited frame receive
+ */
+
+
+#ifndef __FCS_UF_H__
+#define __FCS_UF_H__
+
+/*
+ * fcs friend functions: only between fcs modules
+ */
+void bfa_fcs_uf_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_uf_modexit(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_UF_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FCS_VPORT_H__
+#define __FCS_VPORT_H__
+
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_vport.h>
+#include <defs/bfa_defs_pci.h>
+
+/*
+ * Modudle init/cleanup routines.
+ */
+
+void bfa_fcs_vport_modinit(struct bfa_fcs_s *fcs);
+void bfa_fcs_vport_modexit(struct bfa_fcs_s *fcs);
+
+void bfa_fcs_vport_cleanup(struct bfa_fcs_vport_s *vport);
+void bfa_fcs_vport_online(struct bfa_fcs_vport_s *vport);
+void bfa_fcs_vport_offline(struct bfa_fcs_vport_s *vport);
+void bfa_fcs_vport_delete_comp(struct bfa_fcs_vport_s *vport);
+u32 bfa_fcs_vport_get_max(struct bfa_fcs_s *fcs);
+
+#endif /* __FCS_VPORT_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * port_api.c BFA FCS port
+ */
+
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "lport_priv.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include <fcs/bfa_fcs_fdmi.h>
+
+BFA_TRC_FILE(FCS, FDMI);
+
+#define BFA_FCS_FDMI_CMD_MAX_RETRIES 2
+
+/*
+ * forward declarations
+ */
+static void bfa_fcs_port_fdmi_send_rhba(void *fdmi_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_fdmi_send_rprt(void *fdmi_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_fdmi_send_rpa(void *fdmi_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_fdmi_rhba_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_fdmi_rprt_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_fdmi_rpa_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_fdmi_timeout(void *arg);
+static u16 bfa_fcs_port_fdmi_build_rhba_pyld(
+ struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
+static u16 bfa_fcs_port_fdmi_build_rprt_pyld(
+ struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
+static u16 bfa_fcs_port_fdmi_build_rpa_pyld(
+ struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
+static u16 bfa_fcs_port_fdmi_build_portattr_block(
+ struct bfa_fcs_port_fdmi_s *fdmi, u8 *pyld);
+void bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_port_fdmi_s *fdmi,
+ struct bfa_fcs_fdmi_hba_attr_s *hba_attr);
+void bfa_fcs_fdmi_get_portattr(struct bfa_fcs_port_fdmi_s *fdmi,
+ struct bfa_fcs_fdmi_port_attr_s *port_attr);
+/**
+ * fcs_fdmi_sm FCS FDMI state machine
+ */
+
+/**
+ * FDMI State Machine events
+ */
+enum port_fdmi_event {
+ FDMISM_EVENT_PORT_ONLINE = 1,
+ FDMISM_EVENT_PORT_OFFLINE = 2,
+ FDMISM_EVENT_RSP_OK = 4,
+ FDMISM_EVENT_RSP_ERROR = 5,
+ FDMISM_EVENT_TIMEOUT = 6,
+ FDMISM_EVENT_RHBA_SENT = 7,
+ FDMISM_EVENT_RPRT_SENT = 8,
+ FDMISM_EVENT_RPA_SENT = 9,
+};
+
+static void bfa_fcs_port_fdmi_sm_offline(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_sending_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rhba_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_sending_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rprt_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_sending_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_rpa_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+static void bfa_fcs_port_fdmi_sm_online(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event);
+/**
+ * Start in offline state - awaiting MS to send start.
+ */
+static void
+bfa_fcs_port_fdmi_sm_offline(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ fdmi->retry_cnt = 0;
+
+ switch (event) {
+ case FDMISM_EVENT_PORT_ONLINE:
+ if (port->vport) {
+ /*
+ * For Vports, register a new port.
+ */
+ bfa_sm_set_state(fdmi,
+ bfa_fcs_port_fdmi_sm_sending_rprt);
+ bfa_fcs_port_fdmi_send_rprt(fdmi, NULL);
+ } else {
+ /*
+ * For a base port, we should first register the HBA
+ * atribute. The HBA attribute also contains the base
+ * port registration.
+ */
+ bfa_sm_set_state(fdmi,
+ bfa_fcs_port_fdmi_sm_sending_rhba);
+ bfa_fcs_port_fdmi_send_rhba(fdmi, NULL);
+ }
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_fdmi_sm_sending_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_RHBA_SENT:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rhba);
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(port),
+ &fdmi->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rhba(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_RSP_ERROR:
+ /*
+ * if max retries have not been reached, start timer for a
+ * delayed retry
+ */
+ if (fdmi->retry_cnt++ < BFA_FCS_FDMI_CMD_MAX_RETRIES) {
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rhba_retry);
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(port),
+ &fdmi->timer, bfa_fcs_port_fdmi_timeout,
+ fdmi, BFA_FCS_RETRY_TIMEOUT);
+ } else {
+ /*
+ * set state to offline
+ */
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ }
+ break;
+
+ case FDMISM_EVENT_RSP_OK:
+ /*
+ * Initiate Register Port Attributes
+ */
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_sending_rpa);
+ fdmi->retry_cnt = 0;
+ bfa_fcs_port_fdmi_send_rpa(fdmi, NULL);
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_fcxp_discard(fdmi->fcxp);
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rhba_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_TIMEOUT:
+ /*
+ * Retry Timer Expired. Re-send
+ */
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_sending_rhba);
+ bfa_fcs_port_fdmi_send_rhba(fdmi, NULL);
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ bfa_timer_stop(&fdmi->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/*
+* RPRT : Register Port
+ */
+static void
+bfa_fcs_port_fdmi_sm_sending_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_RPRT_SENT:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rprt);
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(port),
+ &fdmi->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rprt(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_RSP_ERROR:
+ /*
+ * if max retries have not been reached, start timer for a
+ * delayed retry
+ */
+ if (fdmi->retry_cnt++ < BFA_FCS_FDMI_CMD_MAX_RETRIES) {
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rprt_retry);
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(port),
+ &fdmi->timer, bfa_fcs_port_fdmi_timeout,
+ fdmi, BFA_FCS_RETRY_TIMEOUT);
+
+ } else {
+ /*
+ * set state to offline
+ */
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ fdmi->retry_cnt = 0;
+ }
+ break;
+
+ case FDMISM_EVENT_RSP_OK:
+ fdmi->retry_cnt = 0;
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_online);
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_fcxp_discard(fdmi->fcxp);
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rprt_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_TIMEOUT:
+ /*
+ * Retry Timer Expired. Re-send
+ */
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_sending_rprt);
+ bfa_fcs_port_fdmi_send_rprt(fdmi, NULL);
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ bfa_timer_stop(&fdmi->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/*
+ * Register Port Attributes
+ */
+static void
+bfa_fcs_port_fdmi_sm_sending_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_RPA_SENT:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rpa);
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(port),
+ &fdmi->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rpa(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_RSP_ERROR:
+ /*
+ * if max retries have not been reached, start timer for a
+ * delayed retry
+ */
+ if (fdmi->retry_cnt++ < BFA_FCS_FDMI_CMD_MAX_RETRIES) {
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_rpa_retry);
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(port),
+ &fdmi->timer, bfa_fcs_port_fdmi_timeout,
+ fdmi, BFA_FCS_RETRY_TIMEOUT);
+ } else {
+ /*
+ * set state to offline
+ */
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ fdmi->retry_cnt = 0;
+ }
+ break;
+
+ case FDMISM_EVENT_RSP_OK:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_online);
+ fdmi->retry_cnt = 0;
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_fcxp_discard(fdmi->fcxp);
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_fdmi_sm_rpa_retry(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_TIMEOUT:
+ /*
+ * Retry Timer Expired. Re-send
+ */
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_sending_rpa);
+ bfa_fcs_port_fdmi_send_rpa(fdmi, NULL);
+ break;
+
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ bfa_timer_stop(&fdmi->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_fdmi_sm_online(struct bfa_fcs_port_fdmi_s *fdmi,
+ enum port_fdmi_event event)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+ bfa_trc(port->fcs, event);
+
+ switch (event) {
+ case FDMISM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+/**
+* RHBA : Register HBA Attributes.
+ */
+static void
+bfa_fcs_port_fdmi_send_rhba(void *fdmi_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = fdmi_cbarg;
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct fchs_s fchs;
+ int len, attr_len;
+ struct bfa_fcxp_s *fcxp;
+ u8 *pyld;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &fdmi->fcxp_wqe,
+ bfa_fcs_port_fdmi_send_rhba, fdmi);
+ return;
+ }
+ fdmi->fcxp = fcxp;
+
+ pyld = bfa_fcxp_get_reqbuf(fcxp);
+ bfa_os_memset(pyld, 0, FC_MAX_PDUSZ);
+
+ len = fc_fdmi_reqhdr_build(&fchs, pyld, bfa_fcs_port_get_fcid(port),
+ FDMI_RHBA);
+
+ attr_len = bfa_fcs_port_fdmi_build_rhba_pyld(fdmi,
+ (u8 *) ((struct ct_hdr_s *) pyld + 1));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, (len + attr_len), &fchs,
+ bfa_fcs_port_fdmi_rhba_response, (void *)fdmi,
+ FC_MAX_PDUSZ, FC_RA_TOV);
+
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RHBA_SENT);
+}
+
+static u16
+bfa_fcs_port_fdmi_build_rhba_pyld(struct bfa_fcs_port_fdmi_s *fdmi,
+ u8 *pyld)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct bfa_fcs_fdmi_hba_attr_s hba_attr; /* @todo */
+ struct bfa_fcs_fdmi_hba_attr_s *fcs_hba_attr = &hba_attr; /* @todo */
+ struct fdmi_rhba_s *rhba = (struct fdmi_rhba_s *) pyld;
+ struct fdmi_attr_s *attr;
+ u8 *curr_ptr;
+ u16 len, count;
+
+ /*
+ * get hba attributes
+ */
+ bfa_fcs_fdmi_get_hbaattr(fdmi, fcs_hba_attr);
+
+ rhba->hba_id = bfa_fcs_port_get_pwwn(port);
+ rhba->port_list.num_ports = bfa_os_htonl(1);
+ rhba->port_list.port_entry = bfa_fcs_port_get_pwwn(port);
+
+ len = sizeof(rhba->hba_id) + sizeof(rhba->port_list);
+
+ count = 0;
+ len += sizeof(rhba->hba_attr_blk.attr_count);
+
+ /*
+ * fill out the invididual entries of the HBA attrib Block
+ */
+ curr_ptr = (u8 *) &rhba->hba_attr_blk.hba_attr;
+
+ /*
+ * Node Name
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_NODENAME);
+ attr->len = sizeof(wwn_t);
+ memcpy(attr->value, &bfa_fcs_port_get_nwwn(port), attr->len);
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * Manufacturer
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_MANUFACTURER);
+ attr->len = (u16) strlen(fcs_hba_attr->manufacturer);
+ memcpy(attr->value, fcs_hba_attr->manufacturer, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * Serial Number
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_SERIALNUM);
+ attr->len = (u16) strlen(fcs_hba_attr->serial_num);
+ memcpy(attr->value, fcs_hba_attr->serial_num, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * Model
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_MODEL);
+ attr->len = (u16) strlen(fcs_hba_attr->model);
+ memcpy(attr->value, fcs_hba_attr->model, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * Model Desc
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_MODEL_DESC);
+ attr->len = (u16) strlen(fcs_hba_attr->model_desc);
+ memcpy(attr->value, fcs_hba_attr->model_desc, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * H/W Version
+ */
+ if (fcs_hba_attr->hw_version[0] != '\0') {
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_HW_VERSION);
+ attr->len = (u16) strlen(fcs_hba_attr->hw_version);
+ memcpy(attr->value, fcs_hba_attr->hw_version, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+ }
+
+ /*
+ * Driver Version
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_DRIVER_VERSION);
+ attr->len = (u16) strlen(fcs_hba_attr->driver_version);
+ memcpy(attr->value, fcs_hba_attr->driver_version, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * Option Rom Version
+ */
+ if (fcs_hba_attr->option_rom_ver[0] != '\0') {
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_ROM_VERSION);
+ attr->len = (u16) strlen(fcs_hba_attr->option_rom_ver);
+ memcpy(attr->value, fcs_hba_attr->option_rom_ver, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+ }
+
+ /*
+ * f/w Version = driver version
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_FW_VERSION);
+ attr->len = (u16) strlen(fcs_hba_attr->driver_version);
+ memcpy(attr->value, fcs_hba_attr->driver_version, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * OS Name
+ */
+ if (fcs_hba_attr->os_name[0] != '\0') {
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_OS_NAME);
+ attr->len = (u16) strlen(fcs_hba_attr->os_name);
+ memcpy(attr->value, fcs_hba_attr->os_name, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+ }
+
+ /*
+ * MAX_CT_PAYLOAD
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_HBA_ATTRIB_MAX_CT);
+ attr->len = sizeof(fcs_hba_attr->max_ct_pyld);
+ memcpy(attr->value, &fcs_hba_attr->max_ct_pyld, attr->len);
+ len += attr->len;
+ count++;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * Update size of payload
+ */
+ len += ((sizeof(attr->type) + sizeof(attr->len)) * count);
+
+ rhba->hba_attr_blk.attr_count = bfa_os_htonl(count);
+ return len;
+}
+
+static void
+bfa_fcs_port_fdmi_rhba_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = (struct bfa_fcs_port_fdmi_s *)cbarg;
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct ct_hdr_s *cthdr = NULL;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_OK);
+ return;
+ }
+
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+}
+
+/**
+* RPRT : Register Port
+ */
+static void
+bfa_fcs_port_fdmi_send_rprt(void *fdmi_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = fdmi_cbarg;
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct fchs_s fchs;
+ u16 len, attr_len;
+ struct bfa_fcxp_s *fcxp;
+ u8 *pyld;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &fdmi->fcxp_wqe,
+ bfa_fcs_port_fdmi_send_rprt, fdmi);
+ return;
+ }
+ fdmi->fcxp = fcxp;
+
+ pyld = bfa_fcxp_get_reqbuf(fcxp);
+ bfa_os_memset(pyld, 0, FC_MAX_PDUSZ);
+
+ len = fc_fdmi_reqhdr_build(&fchs, pyld, bfa_fcs_port_get_fcid(port),
+ FDMI_RPRT);
+
+ attr_len = bfa_fcs_port_fdmi_build_rprt_pyld(fdmi,
+ (u8 *) ((struct ct_hdr_s *) pyld + 1));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len + attr_len, &fchs,
+ bfa_fcs_port_fdmi_rprt_response, (void *)fdmi,
+ FC_MAX_PDUSZ, FC_RA_TOV);
+
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RPRT_SENT);
+}
+
+/**
+ * This routine builds Port Attribute Block that used in RPA, RPRT commands.
+ */
+static u16
+bfa_fcs_port_fdmi_build_portattr_block(struct bfa_fcs_port_fdmi_s *fdmi,
+ u8 *pyld)
+{
+ struct bfa_fcs_fdmi_port_attr_s fcs_port_attr;
+ struct fdmi_port_attr_s *port_attrib = (struct fdmi_port_attr_s *) pyld;
+ struct fdmi_attr_s *attr;
+ u8 *curr_ptr;
+ u16 len;
+ u8 count = 0;
+
+ /*
+ * get port attributes
+ */
+ bfa_fcs_fdmi_get_portattr(fdmi, &fcs_port_attr);
+
+ len = sizeof(port_attrib->attr_count);
+
+ /*
+ * fill out the invididual entries
+ */
+ curr_ptr = (u8 *) &port_attrib->port_attr;
+
+ /*
+ * FC4 Types
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_FC4_TYPES);
+ attr->len = sizeof(fcs_port_attr.supp_fc4_types);
+ memcpy(attr->value, fcs_port_attr.supp_fc4_types, attr->len);
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ ++count;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * Supported Speed
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_SUPP_SPEED);
+ attr->len = sizeof(fcs_port_attr.supp_speed);
+ memcpy(attr->value, &fcs_port_attr.supp_speed, attr->len);
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ ++count;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * current Port Speed
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_PORT_SPEED);
+ attr->len = sizeof(fcs_port_attr.curr_speed);
+ memcpy(attr->value, &fcs_port_attr.curr_speed, attr->len);
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ ++count;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * max frame size
+ */
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_FRAME_SIZE);
+ attr->len = sizeof(fcs_port_attr.max_frm_size);
+ memcpy(attr->value, &fcs_port_attr.max_frm_size, attr->len);
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ ++count;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ /*
+ * OS Device Name
+ */
+ if (fcs_port_attr.os_device_name[0] != '\0') {
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_DEV_NAME);
+ attr->len = (u16) strlen(fcs_port_attr.os_device_name);
+ memcpy(attr->value, fcs_port_attr.os_device_name, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ ++count;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ }
+ /*
+ * Host Name
+ */
+ if (fcs_port_attr.host_name[0] != '\0') {
+ attr = (struct fdmi_attr_s *) curr_ptr;
+ attr->type = bfa_os_htons(FDMI_PORT_ATTRIB_HOST_NAME);
+ attr->len = (u16) strlen(fcs_port_attr.host_name);
+ memcpy(attr->value, fcs_port_attr.host_name, attr->len);
+ /* variable fields need to be 4 byte aligned */
+ attr->len = fc_roundup(attr->len, sizeof(u32));
+ curr_ptr += sizeof(attr->type) + sizeof(attr->len) + attr->len;
+ len += attr->len;
+ ++count;
+ attr->len =
+ bfa_os_htons(attr->len + sizeof(attr->type) +
+ sizeof(attr->len));
+
+ }
+
+ /*
+ * Update size of payload
+ */
+ port_attrib->attr_count = bfa_os_htonl(count);
+ len += ((sizeof(attr->type) + sizeof(attr->len)) * count);
+ return len;
+}
+
+static u16
+bfa_fcs_port_fdmi_build_rprt_pyld(struct bfa_fcs_port_fdmi_s *fdmi,
+ u8 *pyld)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct fdmi_rprt_s *rprt = (struct fdmi_rprt_s *) pyld;
+ u16 len;
+
+ rprt->hba_id = bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(port->fcs));
+ rprt->port_name = bfa_fcs_port_get_pwwn(port);
+
+ len = bfa_fcs_port_fdmi_build_portattr_block(fdmi,
+ (u8 *) &rprt->port_attr_blk);
+
+ len += sizeof(rprt->hba_id) + sizeof(rprt->port_name);
+
+ return len;
+}
+
+static void
+bfa_fcs_port_fdmi_rprt_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = (struct bfa_fcs_port_fdmi_s *)cbarg;
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct ct_hdr_s *cthdr = NULL;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_OK);
+ return;
+ }
+
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+}
+
+/**
+* RPA : Register Port Attributes.
+ */
+static void
+bfa_fcs_port_fdmi_send_rpa(void *fdmi_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = fdmi_cbarg;
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct fchs_s fchs;
+ u16 len, attr_len;
+ struct bfa_fcxp_s *fcxp;
+ u8 *pyld;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &fdmi->fcxp_wqe,
+ bfa_fcs_port_fdmi_send_rpa, fdmi);
+ return;
+ }
+ fdmi->fcxp = fcxp;
+
+ pyld = bfa_fcxp_get_reqbuf(fcxp);
+ bfa_os_memset(pyld, 0, FC_MAX_PDUSZ);
+
+ len = fc_fdmi_reqhdr_build(&fchs, pyld, bfa_fcs_port_get_fcid(port),
+ FDMI_RPA);
+
+ attr_len = bfa_fcs_port_fdmi_build_rpa_pyld(fdmi,
+ (u8 *) ((struct ct_hdr_s *) pyld + 1));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len + attr_len, &fchs,
+ bfa_fcs_port_fdmi_rpa_response, (void *)fdmi,
+ FC_MAX_PDUSZ, FC_RA_TOV);
+
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RPA_SENT);
+}
+
+static u16
+bfa_fcs_port_fdmi_build_rpa_pyld(struct bfa_fcs_port_fdmi_s *fdmi,
+ u8 *pyld)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct fdmi_rpa_s *rpa = (struct fdmi_rpa_s *) pyld;
+ u16 len;
+
+ rpa->port_name = bfa_fcs_port_get_pwwn(port);
+
+ len = bfa_fcs_port_fdmi_build_portattr_block(fdmi,
+ (u8 *) &rpa->port_attr_blk);
+
+ len += sizeof(rpa->port_name);
+
+ return len;
+}
+
+static void
+bfa_fcs_port_fdmi_rpa_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = (struct bfa_fcs_port_fdmi_s *)cbarg;
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct ct_hdr_s *cthdr = NULL;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_OK);
+ return;
+ }
+
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_RSP_ERROR);
+}
+
+static void
+bfa_fcs_port_fdmi_timeout(void *arg)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = (struct bfa_fcs_port_fdmi_s *)arg;
+
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_TIMEOUT);
+}
+
+void
+bfa_fcs_fdmi_get_hbaattr(struct bfa_fcs_port_fdmi_s *fdmi,
+ struct bfa_fcs_fdmi_hba_attr_s *hba_attr)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct bfa_fcs_driver_info_s *driver_info = &port->fcs->driver_info;
+ struct bfa_adapter_attr_s adapter_attr;
+
+ bfa_os_memset(hba_attr, 0, sizeof(struct bfa_fcs_fdmi_hba_attr_s));
+ bfa_os_memset(&adapter_attr, 0, sizeof(struct bfa_adapter_attr_s));
+
+ bfa_ioc_get_adapter_attr(&port->fcs->bfa->ioc, &adapter_attr);
+
+ strncpy(hba_attr->manufacturer, adapter_attr.manufacturer,
+ sizeof(adapter_attr.manufacturer));
+
+ strncpy(hba_attr->serial_num, adapter_attr.serial_num,
+ sizeof(adapter_attr.serial_num));
+
+ strncpy(hba_attr->model, adapter_attr.model, sizeof(hba_attr->model));
+
+ strncpy(hba_attr->model_desc, adapter_attr.model_descr,
+ sizeof(hba_attr->model_desc));
+
+ strncpy(hba_attr->hw_version, adapter_attr.hw_ver,
+ sizeof(hba_attr->hw_version));
+
+ strncpy(hba_attr->driver_version, (char *)driver_info->version,
+ sizeof(hba_attr->driver_version));
+
+ strncpy(hba_attr->option_rom_ver, adapter_attr.optrom_ver,
+ sizeof(hba_attr->option_rom_ver));
+
+ strncpy(hba_attr->fw_version, adapter_attr.fw_ver,
+ sizeof(hba_attr->fw_version));
+
+ strncpy(hba_attr->os_name, driver_info->host_os_name,
+ sizeof(hba_attr->os_name));
+
+ /*
+ * If there is a patch level, append it to the os name along with a
+ * separator
+ */
+ if (driver_info->host_os_patch[0] != '\0') {
+ strncat(hba_attr->os_name, BFA_FCS_PORT_SYMBNAME_SEPARATOR,
+ sizeof(BFA_FCS_PORT_SYMBNAME_SEPARATOR));
+ strncat(hba_attr->os_name, driver_info->host_os_patch,
+ sizeof(driver_info->host_os_patch));
+ }
+
+ hba_attr->max_ct_pyld = bfa_os_htonl(FC_MAX_PDUSZ);
+
+}
+
+void
+bfa_fcs_fdmi_get_portattr(struct bfa_fcs_port_fdmi_s *fdmi,
+ struct bfa_fcs_fdmi_port_attr_s *port_attr)
+{
+ struct bfa_fcs_port_s *port = fdmi->ms->port;
+ struct bfa_fcs_driver_info_s *driver_info = &port->fcs->driver_info;
+ struct bfa_pport_attr_s pport_attr;
+
+ bfa_os_memset(port_attr, 0, sizeof(struct bfa_fcs_fdmi_port_attr_s));
+
+ /*
+ * get pport attributes from hal
+ */
+ bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+
+ /*
+ * get FC4 type Bitmask
+ */
+ fc_get_fc4type_bitmask(FC_TYPE_FCP, port_attr->supp_fc4_types);
+
+ /*
+ * Supported Speeds
+ */
+ port_attr->supp_speed = bfa_os_htonl(BFA_FCS_FDMI_SUPORTED_SPEEDS);
+
+ /*
+ * Current Speed
+ */
+ port_attr->curr_speed = bfa_os_htonl(pport_attr.speed);
+
+ /*
+ * Max PDU Size.
+ */
+ port_attr->max_frm_size = bfa_os_htonl(FC_MAX_PDUSZ);
+
+ /*
+ * OS device Name
+ */
+ strncpy(port_attr->os_device_name, (char *)driver_info->os_device_name,
+ sizeof(port_attr->os_device_name));
+
+ /*
+ * Host name
+ */
+ strncpy(port_attr->host_name, (char *)driver_info->host_machine_name,
+ sizeof(port_attr->host_name));
+
+}
+
+
+void
+bfa_fcs_port_fdmi_init(struct bfa_fcs_port_ms_s *ms)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = &ms->fdmi;
+
+ fdmi->ms = ms;
+ bfa_sm_set_state(fdmi, bfa_fcs_port_fdmi_sm_offline);
+}
+
+void
+bfa_fcs_port_fdmi_offline(struct bfa_fcs_port_ms_s *ms)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = &ms->fdmi;
+
+ fdmi->ms = ms;
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_PORT_OFFLINE);
+}
+
+void
+bfa_fcs_port_fdmi_online(struct bfa_fcs_port_ms_s *ms)
+{
+ struct bfa_fcs_port_fdmi_s *fdmi = &ms->fdmi;
+
+ fdmi->ms = ms;
+ bfa_sm_send_event(fdmi, FDMISM_EVENT_PORT_ONLINE);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_AEN_H__
+#define __BFA_AEN_H__
+
+#include "defs/bfa_defs_aen.h"
+
+#define BFA_AEN_MAX_ENTRY 512
+
+extern s32 bfa_aen_max_cfg_entry;
+struct bfa_aen_s {
+ void *bfad;
+ s32 max_entry;
+ s32 write_index;
+ s32 read_index;
+ u32 bfad_num;
+ u32 seq_num;
+ void (*aen_cb_notify)(void *bfad);
+ void (*gettimeofday)(struct bfa_timeval_s *tv);
+ struct bfa_trc_mod_s *trcmod;
+ struct bfa_aen_entry_s list[BFA_AEN_MAX_ENTRY]; /* Must be the last */
+};
+
+
+/**
+ * Public APIs
+ */
+static inline void
+bfa_aen_set_max_cfg_entry(int max_entry)
+{
+ bfa_aen_max_cfg_entry = max_entry;
+}
+
+static inline s32
+bfa_aen_get_max_cfg_entry(void)
+{
+ return bfa_aen_max_cfg_entry;
+}
+
+static inline s32
+bfa_aen_get_meminfo(void)
+{
+ return (sizeof(struct bfa_aen_entry_s) * bfa_aen_get_max_cfg_entry());
+}
+
+static inline s32
+bfa_aen_get_wi(struct bfa_aen_s *aen)
+{
+ return aen->write_index;
+}
+
+static inline s32
+bfa_aen_get_ri(struct bfa_aen_s *aen)
+{
+ return aen->read_index;
+}
+
+static inline s32
+bfa_aen_fetch_count(struct bfa_aen_s *aen, s32 read_index)
+{
+ return ((aen->write_index + aen->max_entry) - read_index)
+ % aen->max_entry;
+}
+
+s32 bfa_aen_init(struct bfa_aen_s *aen, struct bfa_trc_mod_s *trcmod,
+ void *bfad, u32 inst_id, void (*aen_cb_notify)(void *),
+ void (*gettimeofday)(struct bfa_timeval_s *));
+
+s32 bfa_aen_post(struct bfa_aen_s *aen, enum bfa_aen_category aen_category,
+ int aen_type, union bfa_aen_data_u *aen_data);
+
+s32 bfa_aen_fetch(struct bfa_aen_s *aen, struct bfa_aen_entry_s *aen_entry,
+ s32 entry_space, s32 rii, s32 *ri_arr,
+ s32 ri_arr_cnt);
+
+s32 bfa_aen_get_inst(struct bfa_aen_s *aen);
+
+#endif /* __BFA_AEN_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ADAPTER Module */
+#ifndef __bfa_aen_adapter_h__
+#define __bfa_aen_adapter_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ADAPTER_ADD \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_ADD)
+#define BFA_AEN_ADAPTER_REMOVE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ADAPTER, BFA_ADAPTER_AEN_REMOVE)
+
+#endif
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_AUDIT Module */
+#ifndef __bfa_aen_audit_h__
+#define __bfa_aen_audit_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_AUDIT_AUTH_ENABLE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_ENABLE)
+#define BFA_AEN_AUDIT_AUTH_DISABLE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_AUDIT, BFA_AUDIT_AEN_AUTH_DISABLE)
+
+#endif
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ETHPORT Module */
+#ifndef __bfa_aen_ethport_h__
+#define __bfa_aen_ethport_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ETHPORT_LINKUP \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKUP)
+#define BFA_AEN_ETHPORT_LINKDOWN \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_LINKDOWN)
+#define BFA_AEN_ETHPORT_ENABLE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_ENABLE)
+#define BFA_AEN_ETHPORT_DISABLE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ETHPORT, BFA_ETHPORT_AEN_DISABLE)
+
+#endif
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_IOC Module */
+#ifndef __bfa_aen_ioc_h__
+#define __bfa_aen_ioc_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_IOC_HBGOOD \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBGOOD)
+#define BFA_AEN_IOC_HBFAIL \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_HBFAIL)
+#define BFA_AEN_IOC_ENABLE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_ENABLE)
+#define BFA_AEN_IOC_DISABLE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_DISABLE)
+#define BFA_AEN_IOC_FWMISMATCH \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_IOC, BFA_IOC_AEN_FWMISMATCH)
+
+#endif
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_ITNIM Module */
+#ifndef __bfa_aen_itnim_h__
+#define __bfa_aen_itnim_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_ITNIM_ONLINE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_ONLINE)
+#define BFA_AEN_ITNIM_OFFLINE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_OFFLINE)
+#define BFA_AEN_ITNIM_DISCONNECT \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_ITNIM, BFA_ITNIM_AEN_DISCONNECT)
+
+#endif
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_LPORT Module */
+#ifndef __bfa_aen_lport_h__
+#define __bfa_aen_lport_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_LPORT_NEW \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW)
+#define BFA_AEN_LPORT_DELETE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE)
+#define BFA_AEN_LPORT_ONLINE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_ONLINE)
+#define BFA_AEN_LPORT_OFFLINE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_OFFLINE)
+#define BFA_AEN_LPORT_DISCONNECT \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DISCONNECT)
+#define BFA_AEN_LPORT_NEW_PROP \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_PROP)
+#define BFA_AEN_LPORT_DELETE_PROP \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_PROP)
+#define BFA_AEN_LPORT_NEW_STANDARD \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NEW_STANDARD)
+#define BFA_AEN_LPORT_DELETE_STANDARD \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_DELETE_STANDARD)
+#define BFA_AEN_LPORT_NPIV_DUP_WWN \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_DUP_WWN)
+#define BFA_AEN_LPORT_NPIV_FABRIC_MAX \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_FABRIC_MAX)
+#define BFA_AEN_LPORT_NPIV_UNKNOWN \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_LPORT, BFA_LPORT_AEN_NPIV_UNKNOWN)
+
+#endif
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_PORT Module */
+#ifndef __bfa_aen_port_h__
+#define __bfa_aen_port_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_PORT_ONLINE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ONLINE)
+#define BFA_AEN_PORT_OFFLINE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_OFFLINE)
+#define BFA_AEN_PORT_RLIR \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_RLIR)
+#define BFA_AEN_PORT_SFP_INSERT \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_INSERT)
+#define BFA_AEN_PORT_SFP_REMOVE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_REMOVE)
+#define BFA_AEN_PORT_SFP_POM \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_POM)
+#define BFA_AEN_PORT_ENABLE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_ENABLE)
+#define BFA_AEN_PORT_DISABLE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISABLE)
+#define BFA_AEN_PORT_AUTH_ON \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_ON)
+#define BFA_AEN_PORT_AUTH_OFF \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_AUTH_OFF)
+#define BFA_AEN_PORT_DISCONNECT \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_DISCONNECT)
+#define BFA_AEN_PORT_QOS_NEG \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_QOS_NEG)
+#define BFA_AEN_PORT_FABRIC_NAME_CHANGE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_FABRIC_NAME_CHANGE)
+#define BFA_AEN_PORT_SFP_ACCESS_ERROR \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_ACCESS_ERROR)
+#define BFA_AEN_PORT_SFP_UNSUPPORT \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_PORT, BFA_PORT_AEN_SFP_UNSUPPORT)
+
+#endif
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for BFA_AEN_CAT_RPORT Module */
+#ifndef __bfa_aen_rport_h__
+#define __bfa_aen_rport_h__
+
+#include <cs/bfa_log.h>
+#include <defs/bfa_defs_aen.h>
+
+#define BFA_AEN_RPORT_ONLINE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_ONLINE)
+#define BFA_AEN_RPORT_OFFLINE \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_OFFLINE)
+#define BFA_AEN_RPORT_DISCONNECT \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_DISCONNECT)
+#define BFA_AEN_RPORT_QOS_PRIO \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_PRIO)
+#define BFA_AEN_RPORT_QOS_FLOWID \
+ BFA_LOG_CREATE_ID(BFA_AEN_CAT_RPORT, BFA_RPORT_AEN_QOS_FLOWID)
+
+#endif
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_H__
+#define __BFA_H__
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_debug.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+#include <cs/bfa_plog.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_iocfc.h>
+#include <aen/bfa_aen.h>
+#include <bfi/bfi.h>
+
+struct bfa_s;
+#include <bfa_intr_priv.h>
+
+struct bfa_pcidev_s;
+
+/**
+ * PCI devices supported by the current BFA
+ */
+struct bfa_pciid_s {
+ u16 device_id;
+ u16 vendor_id;
+};
+
+extern char bfa_version[];
+
+/**
+ * BFA Power Mgmt Commands
+ */
+enum bfa_pm_cmd {
+ BFA_PM_CTL_D0 = 0,
+ BFA_PM_CTL_D1 = 1,
+ BFA_PM_CTL_D2 = 2,
+ BFA_PM_CTL_D3 = 3,
+};
+
+/**
+ * BFA memory resources
+ */
+enum bfa_mem_type {
+ BFA_MEM_TYPE_KVA = 1, /*! Kernel Virtual Memory *(non-dma-able) */
+ BFA_MEM_TYPE_DMA = 2, /*! DMA-able memory */
+ BFA_MEM_TYPE_MAX = BFA_MEM_TYPE_DMA,
+};
+
+struct bfa_mem_elem_s {
+ enum bfa_mem_type mem_type; /* see enum bfa_mem_type */
+ u32 mem_len; /* Total Length in Bytes */
+ u8 *kva; /* kernel virtual address */
+ u64 dma; /* dma address if DMA memory */
+ u8 *kva_curp; /* kva allocation cursor */
+ u64 dma_curp; /* dma allocation cursor */
+};
+
+struct bfa_meminfo_s {
+ struct bfa_mem_elem_s meminfo[BFA_MEM_TYPE_MAX];
+};
+#define bfa_meminfo_kva(_m) \
+ (_m)->meminfo[BFA_MEM_TYPE_KVA - 1].kva_curp
+#define bfa_meminfo_dma_virt(_m) \
+ (_m)->meminfo[BFA_MEM_TYPE_DMA - 1].kva_curp
+#define bfa_meminfo_dma_phys(_m) \
+ (_m)->meminfo[BFA_MEM_TYPE_DMA - 1].dma_curp
+
+/**
+ * Generic Scatter Gather Element used by driver
+ */
+struct bfa_sge_s {
+ u32 sg_len;
+ void *sg_addr;
+};
+
+#define bfa_sge_to_be(__sge) do { \
+ ((u32 *)(__sge))[0] = bfa_os_htonl(((u32 *)(__sge))[0]); \
+ ((u32 *)(__sge))[1] = bfa_os_htonl(((u32 *)(__sge))[1]); \
+ ((u32 *)(__sge))[2] = bfa_os_htonl(((u32 *)(__sge))[2]); \
+} while (0)
+
+
+/*
+ * bfa stats interfaces
+ */
+#define bfa_stats(_mod, _stats) (_mod)->stats._stats ++
+
+#define bfa_ioc_get_stats(__bfa, __ioc_stats) \
+ bfa_ioc_fetch_stats(&(__bfa)->ioc, __ioc_stats)
+#define bfa_ioc_clear_stats(__bfa) \
+ bfa_ioc_clr_stats(&(__bfa)->ioc)
+
+/*
+ * bfa API functions
+ */
+void bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids);
+void bfa_cfg_get_default(struct bfa_iocfc_cfg_s *cfg);
+void bfa_cfg_get_min(struct bfa_iocfc_cfg_s *cfg);
+void bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo);
+void bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg,
+ struct bfa_meminfo_s *meminfo,
+ struct bfa_pcidev_s *pcidev);
+void bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod);
+void bfa_init_log(struct bfa_s *bfa, struct bfa_log_mod_s *logmod);
+void bfa_init_aen(struct bfa_s *bfa, struct bfa_aen_s *aen);
+void bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog);
+void bfa_detach(struct bfa_s *bfa);
+void bfa_init(struct bfa_s *bfa);
+void bfa_start(struct bfa_s *bfa);
+void bfa_stop(struct bfa_s *bfa);
+void bfa_attach_fcs(struct bfa_s *bfa);
+void bfa_cb_init(void *bfad, bfa_status_t status);
+void bfa_cb_stop(void *bfad, bfa_status_t status);
+void bfa_cb_updateq(void *bfad, bfa_status_t status);
+
+bfa_boolean_t bfa_intx(struct bfa_s *bfa);
+void bfa_isr_enable(struct bfa_s *bfa);
+void bfa_isr_disable(struct bfa_s *bfa);
+void bfa_msix_getvecs(struct bfa_s *bfa, u32 *msix_vecs_bmap,
+ u32 *num_vecs, u32 *max_vec_bit);
+#define bfa_msix(__bfa, __vec) (__bfa)->msix.handler[__vec](__bfa, __vec)
+
+void bfa_comp_deq(struct bfa_s *bfa, struct list_head *comp_q);
+void bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q);
+void bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q);
+
+typedef void (*bfa_cb_ioc_t) (void *cbarg, enum bfa_status status);
+void bfa_iocfc_get_attr(struct bfa_s *bfa, struct bfa_iocfc_attr_s *attr);
+bfa_status_t bfa_iocfc_get_stats(struct bfa_s *bfa,
+ struct bfa_iocfc_stats_s *stats,
+ bfa_cb_ioc_t cbfn, void *cbarg);
+bfa_status_t bfa_iocfc_clear_stats(struct bfa_s *bfa,
+ bfa_cb_ioc_t cbfn, void *cbarg);
+void bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr);
+
+void bfa_adapter_get_attr(struct bfa_s *bfa,
+ struct bfa_adapter_attr_s *ad_attr);
+u64 bfa_adapter_get_id(struct bfa_s *bfa);
+
+bfa_status_t bfa_iocfc_israttr_set(struct bfa_s *bfa,
+ struct bfa_iocfc_intr_attr_s *attr);
+
+void bfa_iocfc_enable(struct bfa_s *bfa);
+void bfa_iocfc_disable(struct bfa_s *bfa);
+void bfa_ioc_auto_recover(bfa_boolean_t auto_recover);
+void bfa_cb_ioc_disable(void *bfad);
+void bfa_timer_tick(struct bfa_s *bfa);
+#define bfa_timer_start(_bfa, _timer, _timercb, _arg, _timeout) \
+ bfa_timer_begin(&(_bfa)->timer_mod, _timer, _timercb, _arg, _timeout)
+
+/*
+ * BFA debug API functions
+ */
+bfa_status_t bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen);
+bfa_status_t bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen);
+
+#include "bfa_priv.h"
+
+#endif /* __BFA_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCPIM_H__
+#define __BFA_FCPIM_H__
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_fcpim.h>
+#include <defs/bfa_defs_fcpim.h>
+
+/*
+ * forward declarations
+ */
+struct bfa_itnim_s;
+struct bfa_ioim_s;
+struct bfa_tskim_s;
+struct bfad_ioim_s;
+struct bfad_tskim_s;
+
+/*
+ * bfa fcpim module API functions
+ */
+void bfa_fcpim_path_tov_set(struct bfa_s *bfa, u16 path_tov);
+u16 bfa_fcpim_path_tov_get(struct bfa_s *bfa);
+void bfa_fcpim_qdepth_set(struct bfa_s *bfa, u16 q_depth);
+u16 bfa_fcpim_qdepth_get(struct bfa_s *bfa);
+bfa_status_t bfa_fcpim_get_modstats(struct bfa_s *bfa,
+ struct bfa_fcpim_stats_s *modstats);
+bfa_status_t bfa_fcpim_clr_modstats(struct bfa_s *bfa);
+
+/*
+ * bfa itnim API functions
+ */
+struct bfa_itnim_s *bfa_itnim_create(struct bfa_s *bfa,
+ struct bfa_rport_s *rport, void *itnim);
+void bfa_itnim_delete(struct bfa_itnim_s *itnim);
+void bfa_itnim_online(struct bfa_itnim_s *itnim,
+ bfa_boolean_t seq_rec);
+void bfa_itnim_offline(struct bfa_itnim_s *itnim);
+void bfa_itnim_get_stats(struct bfa_itnim_s *itnim,
+ struct bfa_itnim_hal_stats_s *stats);
+void bfa_itnim_clear_stats(struct bfa_itnim_s *itnim);
+
+
+/**
+ * BFA completion callback for bfa_itnim_online().
+ *
+ * @param[in] itnim FCS or driver itnim instance
+ *
+ * return None
+ */
+void bfa_cb_itnim_online(void *itnim);
+
+/**
+ * BFA completion callback for bfa_itnim_offline().
+ *
+ * @param[in] itnim FCS or driver itnim instance
+ *
+ * return None
+ */
+void bfa_cb_itnim_offline(void *itnim);
+void bfa_cb_itnim_tov_begin(void *itnim);
+void bfa_cb_itnim_tov(void *itnim);
+
+/**
+ * BFA notification to FCS/driver for second level error recovery.
+ *
+ * Atleast one I/O request has timedout and target is unresponsive to
+ * repeated abort requests. Second level error recovery should be initiated
+ * by starting implicit logout and recovery procedures.
+ *
+ * @param[in] itnim FCS or driver itnim instance
+ *
+ * return None
+ */
+void bfa_cb_itnim_sler(void *itnim);
+
+/*
+ * bfa ioim API functions
+ */
+struct bfa_ioim_s *bfa_ioim_alloc(struct bfa_s *bfa,
+ struct bfad_ioim_s *dio,
+ struct bfa_itnim_s *itnim,
+ u16 nsgles);
+
+void bfa_ioim_free(struct bfa_ioim_s *ioim);
+void bfa_ioim_start(struct bfa_ioim_s *ioim);
+void bfa_ioim_abort(struct bfa_ioim_s *ioim);
+void bfa_ioim_delayed_comp(struct bfa_ioim_s *ioim,
+ bfa_boolean_t iotov);
+
+
+/**
+ * I/O completion notification.
+ *
+ * @param[in] dio driver IO structure
+ * @param[in] io_status IO completion status
+ * @param[in] scsi_status SCSI status returned by target
+ * @param[in] sns_len SCSI sense length, 0 if none
+ * @param[in] sns_info SCSI sense data, if any
+ * @param[in] residue Residual length
+ *
+ * @return None
+ */
+void bfa_cb_ioim_done(void *bfad, struct bfad_ioim_s *dio,
+ enum bfi_ioim_status io_status,
+ u8 scsi_status, int sns_len,
+ u8 *sns_info, s32 residue);
+
+/**
+ * I/O good completion notification.
+ *
+ * @param[in] dio driver IO structure
+ *
+ * @return None
+ */
+void bfa_cb_ioim_good_comp(void *bfad, struct bfad_ioim_s *dio);
+
+/**
+ * I/O abort completion notification
+ *
+ * @param[in] dio driver IO that was aborted
+ *
+ * @return None
+ */
+void bfa_cb_ioim_abort(void *bfad, struct bfad_ioim_s *dio);
+void bfa_cb_ioim_resfree(void *hcb_bfad);
+
+void bfa_cb_ioim_resfree(void *hcb_bfad);
+
+/*
+ * bfa tskim API functions
+ */
+struct bfa_tskim_s *bfa_tskim_alloc(struct bfa_s *bfa,
+ struct bfad_tskim_s *dtsk);
+void bfa_tskim_free(struct bfa_tskim_s *tskim);
+void bfa_tskim_start(struct bfa_tskim_s *tskim,
+ struct bfa_itnim_s *itnim, lun_t lun,
+ enum fcp_tm_cmnd tm, u8 t_secs);
+void bfa_cb_tskim_done(void *bfad, struct bfad_tskim_s *dtsk,
+ enum bfi_tskim_status tsk_status);
+
+#endif /* __BFA_FCPIM_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCPTM_H__
+#define __BFA_FCPTM_H__
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfi/bfi_fcptm.h>
+
+/*
+ * forward declarations
+ */
+struct bfa_tin_s;
+struct bfa_iotm_s;
+struct bfa_tsktm_s;
+
+/*
+ * bfa fcptm module API functions
+ */
+void bfa_fcptm_path_tov_set(struct bfa_s *bfa, u16 path_tov);
+u16 bfa_fcptm_path_tov_get(struct bfa_s *bfa);
+void bfa_fcptm_qdepth_set(struct bfa_s *bfa, u16 q_depth);
+u16 bfa_fcptm_qdepth_get(struct bfa_s *bfa);
+
+/*
+ * bfa tin API functions
+ */
+void bfa_tin_get_stats(struct bfa_tin_s *tin, struct bfa_tin_stats_s *stats);
+void bfa_tin_clear_stats(struct bfa_tin_s *tin);
+
+#endif /* __BFA_FCPTM_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_SVC_H__
+#define __BFA_SVC_H__
+
+/*
+ * forward declarations
+ */
+struct bfa_fcxp_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_rport.h>
+#include <defs/bfa_defs_qos.h>
+#include <cs/bfa_sm.h>
+#include <bfa.h>
+
+/**
+ * BFA rport information.
+ */
+struct bfa_rport_info_s {
+ u16 max_frmsz; /* max rcv pdu size */
+ u32 pid : 24, /* remote port ID */
+ lp_tag : 8;
+ u32 local_pid : 24, /* local port ID */
+ cisc : 8; /* CIRO supported */
+ u8 fc_class; /* supported FC classes. enum fc_cos */
+ u8 vf_en; /* virtual fabric enable */
+ u16 vf_id; /* virtual fabric ID */
+ enum bfa_pport_speed speed; /* Rport's current speed */
+};
+
+/**
+ * BFA rport data structure
+ */
+struct bfa_rport_s {
+ struct list_head qe; /* queue element */
+ bfa_sm_t sm; /* state machine */
+ struct bfa_s *bfa; /* backpointer to BFA */
+ void *rport_drv; /* fcs/driver rport object */
+ u16 fw_handle; /* firmware rport handle */
+ u16 rport_tag; /* BFA rport tag */
+ struct bfa_rport_info_s rport_info; /* rport info from *fcs/driver */
+ struct bfa_reqq_wait_s reqq_wait; /* to wait for room in reqq */
+ struct bfa_cb_qe_s hcb_qe; /* BFA callback qelem */
+ struct bfa_rport_hal_stats_s stats; /* BFA rport statistics */
+ struct bfa_rport_qos_attr_s qos_attr;
+ union a {
+ bfa_status_t status; /* f/w status */
+ void *fw_msg; /* QoS scn event */
+ } event_arg;
+};
+#define BFA_RPORT_FC_COS(_rport) ((_rport)->rport_info.fc_class)
+
+/**
+ * Send completion callback.
+ */
+typedef void (*bfa_cb_fcxp_send_t) (void *bfad_fcxp, struct bfa_fcxp_s *fcxp,
+ void *cbarg, enum bfa_status req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs);
+
+/**
+ * BFA fcxp allocation (asynchronous)
+ */
+typedef void (*bfa_fcxp_alloc_cbfn_t) (void *cbarg, struct bfa_fcxp_s *fcxp);
+
+struct bfa_fcxp_wqe_s {
+ struct list_head qe;
+ bfa_fcxp_alloc_cbfn_t alloc_cbfn;
+ void *alloc_cbarg;
+};
+
+typedef u64 (*bfa_fcxp_get_sgaddr_t) (void *bfad_fcxp, int sgeid);
+typedef u32 (*bfa_fcxp_get_sglen_t) (void *bfad_fcxp, int sgeid);
+
+#define BFA_UF_BUFSZ (2 * 1024 + 256)
+
+/**
+ * @todo private
+ */
+struct bfa_uf_buf_s {
+ u8 d[BFA_UF_BUFSZ];
+};
+
+
+struct bfa_uf_s {
+ struct list_head qe; /* queue element */
+ struct bfa_s *bfa; /* bfa instance */
+ u16 uf_tag; /* identifying tag f/w messages */
+ u16 vf_id;
+ u16 src_rport_handle;
+ u16 rsvd;
+ u8 *data_ptr;
+ u16 data_len; /* actual receive length */
+ u16 pb_len; /* posted buffer length */
+ void *buf_kva; /* buffer virtual address */
+ u64 buf_pa; /* buffer physical address */
+ struct bfa_cb_qe_s hcb_qe; /* comp: BFA comp qelem */
+ struct bfa_sge_s sges[BFI_SGE_INLINE_MAX];
+};
+
+typedef void (*bfa_cb_pport_t) (void *cbarg, enum bfa_status status);
+
+/**
+ * bfa lport login/logout service interface
+ */
+struct bfa_lps_s {
+ struct list_head qe; /* queue element */
+ struct bfa_s *bfa; /* parent bfa instance */
+ bfa_sm_t sm; /* finite state machine */
+ u8 lp_tag; /* lport tag */
+ u8 reqq; /* lport request queue */
+ u8 alpa; /* ALPA for loop topologies */
+ u32 lp_pid; /* lport port ID */
+ bfa_boolean_t fdisc; /* send FDISC instead of FLOGI*/
+ bfa_boolean_t auth_en; /* enable authentication */
+ bfa_boolean_t auth_req; /* authentication required */
+ bfa_boolean_t npiv_en; /* NPIV is allowed by peer */
+ bfa_boolean_t fport; /* attached peer is F_PORT */
+ bfa_boolean_t brcd_switch;/* attached peer is brcd switch */
+ bfa_status_t status; /* login status */
+ u16 pdusz; /* max receive PDU size */
+ u16 pr_bbcred; /* BB_CREDIT from peer */
+ u8 lsrjt_rsn; /* LSRJT reason */
+ u8 lsrjt_expl; /* LSRJT explanation */
+ wwn_t pwwn; /* port wwn of lport */
+ wwn_t nwwn; /* node wwn of lport */
+ wwn_t pr_pwwn; /* port wwn of lport peer */
+ wwn_t pr_nwwn; /* node wwn of lport peer */
+ mac_t lp_mac; /* fpma/spma MAC for lport */
+ mac_t fcf_mac; /* FCF MAC of lport */
+ struct bfa_reqq_wait_s wqe; /* request wait queue element */
+ void *uarg; /* user callback arg */
+ struct bfa_cb_qe_s hcb_qe; /* comp: callback qelem */
+ struct bfi_lps_login_rsp_s *loginrsp;
+ bfa_eproto_status_t ext_status;
+};
+
+/*
+ * bfa pport API functions
+ */
+bfa_status_t bfa_pport_enable(struct bfa_s *bfa);
+bfa_status_t bfa_pport_disable(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_speed(struct bfa_s *bfa,
+ enum bfa_pport_speed speed);
+enum bfa_pport_speed bfa_pport_get_speed(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_topology(struct bfa_s *bfa,
+ enum bfa_pport_topology topo);
+enum bfa_pport_topology bfa_pport_get_topology(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_hardalpa(struct bfa_s *bfa, u8 alpa);
+bfa_boolean_t bfa_pport_get_hardalpa(struct bfa_s *bfa, u8 *alpa);
+u8 bfa_pport_get_myalpa(struct bfa_s *bfa);
+bfa_status_t bfa_pport_clr_hardalpa(struct bfa_s *bfa);
+bfa_status_t bfa_pport_cfg_maxfrsize(struct bfa_s *bfa, u16 maxsize);
+u16 bfa_pport_get_maxfrsize(struct bfa_s *bfa);
+u32 bfa_pport_mypid(struct bfa_s *bfa);
+u8 bfa_pport_get_rx_bbcredit(struct bfa_s *bfa);
+bfa_status_t bfa_pport_trunk_enable(struct bfa_s *bfa, u8 bitmap);
+bfa_status_t bfa_pport_trunk_disable(struct bfa_s *bfa);
+bfa_boolean_t bfa_pport_trunk_query(struct bfa_s *bfa, u32 *bitmap);
+void bfa_pport_get_attr(struct bfa_s *bfa, struct bfa_pport_attr_s *attr);
+wwn_t bfa_pport_get_wwn(struct bfa_s *bfa, bfa_boolean_t node);
+bfa_status_t bfa_pport_get_stats(struct bfa_s *bfa,
+ union bfa_pport_stats_u *stats,
+ bfa_cb_pport_t cbfn, void *cbarg);
+bfa_status_t bfa_pport_clear_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+ void *cbarg);
+void bfa_pport_event_register(struct bfa_s *bfa,
+ void (*event_cbfn) (void *cbarg,
+ bfa_pport_event_t event), void *event_cbarg);
+bfa_boolean_t bfa_pport_is_disabled(struct bfa_s *bfa);
+void bfa_pport_cfg_qos(struct bfa_s *bfa, bfa_boolean_t on_off);
+void bfa_pport_cfg_ratelim(struct bfa_s *bfa, bfa_boolean_t on_off);
+bfa_status_t bfa_pport_cfg_ratelim_speed(struct bfa_s *bfa,
+ enum bfa_pport_speed speed);
+enum bfa_pport_speed bfa_pport_get_ratelim_speed(struct bfa_s *bfa);
+
+void bfa_pport_set_tx_bbcredit(struct bfa_s *bfa, u16 tx_bbcredit);
+void bfa_pport_busy(struct bfa_s *bfa, bfa_boolean_t status);
+void bfa_pport_beacon(struct bfa_s *bfa, bfa_boolean_t beacon,
+ bfa_boolean_t link_e2e_beacon);
+void bfa_cb_pport_event(void *cbarg, bfa_pport_event_t event);
+void bfa_pport_qos_get_attr(struct bfa_s *bfa, struct bfa_qos_attr_s *qos_attr);
+void bfa_pport_qos_get_vc_attr(struct bfa_s *bfa,
+ struct bfa_qos_vc_attr_s *qos_vc_attr);
+bfa_status_t bfa_pport_get_qos_stats(struct bfa_s *bfa,
+ union bfa_pport_stats_u *stats,
+ bfa_cb_pport_t cbfn, void *cbarg);
+bfa_status_t bfa_pport_clear_qos_stats(struct bfa_s *bfa, bfa_cb_pport_t cbfn,
+ void *cbarg);
+bfa_boolean_t bfa_pport_is_ratelim(struct bfa_s *bfa);
+bfa_boolean_t bfa_pport_is_linkup(struct bfa_s *bfa);
+
+/*
+ * bfa rport API functions
+ */
+struct bfa_rport_s *bfa_rport_create(struct bfa_s *bfa, void *rport_drv);
+void bfa_rport_delete(struct bfa_rport_s *rport);
+void bfa_rport_online(struct bfa_rport_s *rport,
+ struct bfa_rport_info_s *rport_info);
+void bfa_rport_offline(struct bfa_rport_s *rport);
+void bfa_rport_speed(struct bfa_rport_s *rport, enum bfa_pport_speed speed);
+void bfa_rport_get_stats(struct bfa_rport_s *rport,
+ struct bfa_rport_hal_stats_s *stats);
+void bfa_rport_clear_stats(struct bfa_rport_s *rport);
+void bfa_cb_rport_online(void *rport);
+void bfa_cb_rport_offline(void *rport);
+void bfa_cb_rport_qos_scn_flowid(void *rport,
+ struct bfa_rport_qos_attr_s old_qos_attr,
+ struct bfa_rport_qos_attr_s new_qos_attr);
+void bfa_cb_rport_qos_scn_prio(void *rport,
+ struct bfa_rport_qos_attr_s old_qos_attr,
+ struct bfa_rport_qos_attr_s new_qos_attr);
+void bfa_rport_get_qos_attr(struct bfa_rport_s *rport,
+ struct bfa_rport_qos_attr_s *qos_attr);
+
+/*
+ * bfa fcxp API functions
+ */
+struct bfa_fcxp_s *bfa_fcxp_alloc(void *bfad_fcxp, struct bfa_s *bfa,
+ int nreq_sgles, int nrsp_sgles,
+ bfa_fcxp_get_sgaddr_t get_req_sga,
+ bfa_fcxp_get_sglen_t get_req_sglen,
+ bfa_fcxp_get_sgaddr_t get_rsp_sga,
+ bfa_fcxp_get_sglen_t get_rsp_sglen);
+void bfa_fcxp_alloc_wait(struct bfa_s *bfa, struct bfa_fcxp_wqe_s *wqe,
+ bfa_fcxp_alloc_cbfn_t alloc_cbfn, void *cbarg);
+void bfa_fcxp_walloc_cancel(struct bfa_s *bfa,
+ struct bfa_fcxp_wqe_s *wqe);
+void bfa_fcxp_discard(struct bfa_fcxp_s *fcxp);
+
+void *bfa_fcxp_get_reqbuf(struct bfa_fcxp_s *fcxp);
+void *bfa_fcxp_get_rspbuf(struct bfa_fcxp_s *fcxp);
+
+void bfa_fcxp_free(struct bfa_fcxp_s *fcxp);
+
+void bfa_fcxp_send(struct bfa_fcxp_s *fcxp,
+ struct bfa_rport_s *rport, u16 vf_id, u8 lp_tag,
+ bfa_boolean_t cts, enum fc_cos cos,
+ u32 reqlen, struct fchs_s *fchs,
+ bfa_cb_fcxp_send_t cbfn,
+ void *cbarg,
+ u32 rsp_maxlen, u8 rsp_timeout);
+bfa_status_t bfa_fcxp_abort(struct bfa_fcxp_s *fcxp);
+u32 bfa_fcxp_get_reqbufsz(struct bfa_fcxp_s *fcxp);
+u32 bfa_fcxp_get_maxrsp(struct bfa_s *bfa);
+
+static inline void *
+bfa_uf_get_frmbuf(struct bfa_uf_s *uf)
+{
+ return uf->data_ptr;
+}
+
+static inline u16
+bfa_uf_get_frmlen(struct bfa_uf_s *uf)
+{
+ return uf->data_len;
+}
+
+/**
+ * Callback prototype for unsolicited frame receive handler.
+ *
+ * @param[in] cbarg callback arg for receive handler
+ * @param[in] uf unsolicited frame descriptor
+ *
+ * @return None
+ */
+typedef void (*bfa_cb_uf_recv_t) (void *cbarg, struct bfa_uf_s *uf);
+
+/*
+ * bfa uf API functions
+ */
+void bfa_uf_recv_register(struct bfa_s *bfa, bfa_cb_uf_recv_t ufrecv,
+ void *cbarg);
+void bfa_uf_free(struct bfa_uf_s *uf);
+
+/**
+ * bfa lport service api
+ */
+
+struct bfa_lps_s *bfa_lps_alloc(struct bfa_s *bfa);
+void bfa_lps_delete(struct bfa_lps_s *lps);
+void bfa_lps_discard(struct bfa_lps_s *lps);
+void bfa_lps_flogi(struct bfa_lps_s *lps, void *uarg, u8 alpa, u16 pdusz,
+ wwn_t pwwn, wwn_t nwwn, bfa_boolean_t auth_en);
+void bfa_lps_fdisc(struct bfa_lps_s *lps, void *uarg, u16 pdusz, wwn_t pwwn,
+ wwn_t nwwn);
+void bfa_lps_flogo(struct bfa_lps_s *lps);
+void bfa_lps_fdisclogo(struct bfa_lps_s *lps);
+u8 bfa_lps_get_tag(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_npiv_en(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_fport(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_brcd_fabric(struct bfa_lps_s *lps);
+bfa_boolean_t bfa_lps_is_authreq(struct bfa_lps_s *lps);
+bfa_eproto_status_t bfa_lps_get_extstatus(struct bfa_lps_s *lps);
+u32 bfa_lps_get_pid(struct bfa_lps_s *lps);
+u8 bfa_lps_get_tag_from_pid(struct bfa_s *bfa, u32 pid);
+u16 bfa_lps_get_peer_bbcredit(struct bfa_lps_s *lps);
+wwn_t bfa_lps_get_peer_pwwn(struct bfa_lps_s *lps);
+wwn_t bfa_lps_get_peer_nwwn(struct bfa_lps_s *lps);
+u8 bfa_lps_get_lsrjt_rsn(struct bfa_lps_s *lps);
+u8 bfa_lps_get_lsrjt_expl(struct bfa_lps_s *lps);
+void bfa_cb_lps_flogi_comp(void *bfad, void *uarg, bfa_status_t status);
+void bfa_cb_lps_flogo_comp(void *bfad, void *uarg);
+void bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status);
+void bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg);
+
+#endif /* __BFA_SVC_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_TIMER_H__
+#define __BFA_TIMER_H__
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_q.h>
+
+struct bfa_s;
+
+typedef void (*bfa_timer_cbfn_t)(void *);
+
+/**
+ * BFA timer data structure
+ */
+struct bfa_timer_s {
+ struct list_head qe;
+ bfa_timer_cbfn_t timercb;
+ void *arg;
+ int timeout; /**< in millisecs. */
+};
+
+/**
+ * Timer module structure
+ */
+struct bfa_timer_mod_s {
+ struct list_head timer_q;
+};
+
+#define BFA_TIMER_FREQ 500 /**< specified in millisecs */
+
+void bfa_timer_beat(struct bfa_timer_mod_s *mod);
+void bfa_timer_init(struct bfa_timer_mod_s *mod);
+void bfa_timer_begin(struct bfa_timer_mod_s *mod, struct bfa_timer_s *timer,
+ bfa_timer_cbfn_t timercb, void *arg,
+ unsigned int timeout);
+void bfa_timer_stop(struct bfa_timer_s *timer);
+
+#endif /* __BFA_TIMER_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_H__
+#define __BFI_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_status.h>
+
+#pragma pack(1)
+
+/**
+ * Msg header common to all msgs
+ */
+struct bfi_mhdr_s {
+ u8 msg_class; /* @ref bfi_mclass_t */
+ u8 msg_id; /* msg opcode with in the class */
+ union {
+ struct {
+ u8 rsvd;
+ u8 lpu_id; /* msg destination */
+ } h2i;
+ u16 i2htok; /* token in msgs to host */
+ } mtag;
+};
+
+#define bfi_h2i_set(_mh, _mc, _op, _lpuid) do { \
+ (_mh).msg_class = (_mc); \
+ (_mh).msg_id = (_op); \
+ (_mh).mtag.h2i.lpu_id = (_lpuid); \
+} while (0)
+
+#define bfi_i2h_set(_mh, _mc, _op, _i2htok) do { \
+ (_mh).msg_class = (_mc); \
+ (_mh).msg_id = (_op); \
+ (_mh).mtag.i2htok = (_i2htok); \
+} while (0)
+
+/*
+ * Message opcodes: 0-127 to firmware, 128-255 to host
+ */
+#define BFI_I2H_OPCODE_BASE 128
+#define BFA_I2HM(_x) ((_x) + BFI_I2H_OPCODE_BASE)
+
+/**
+ ****************************************************************************
+ *
+ * Scatter Gather Element and Page definition
+ *
+ ****************************************************************************
+ */
+
+#define BFI_SGE_INLINE 1
+#define BFI_SGE_INLINE_MAX (BFI_SGE_INLINE + 1)
+
+/**
+ * SG Flags
+ */
+enum {
+ BFI_SGE_DATA = 0, /* data address, not last */
+ BFI_SGE_DATA_CPL = 1, /* data addr, last in current page */
+ BFI_SGE_DATA_LAST = 3, /* data address, last */
+ BFI_SGE_LINK = 2, /* link address */
+ BFI_SGE_PGDLEN = 2, /* cumulative data length for page */
+};
+
+/**
+ * DMA addresses
+ */
+union bfi_addr_u {
+ struct {
+ u32 addr_lo;
+ u32 addr_hi;
+ } a32;
+};
+
+/**
+ * Scatter Gather Element
+ */
+struct bfi_sge_s {
+#ifdef __BIGENDIAN
+ u32 flags : 2,
+ rsvd : 2,
+ sg_len : 28;
+#else
+ u32 sg_len : 28,
+ rsvd : 2,
+ flags : 2;
+#endif
+ union bfi_addr_u sga;
+};
+
+/**
+ * Scatter Gather Page
+ */
+#define BFI_SGPG_DATA_SGES 7
+#define BFI_SGPG_SGES_MAX (BFI_SGPG_DATA_SGES + 1)
+#define BFI_SGPG_RSVD_WD_LEN 8
+struct bfi_sgpg_s {
+ struct bfi_sge_s sges[BFI_SGPG_SGES_MAX];
+ u32 rsvd[BFI_SGPG_RSVD_WD_LEN];
+};
+
+/*
+ * Large Message structure - 128 Bytes size Msgs
+ */
+#define BFI_LMSG_SZ 128
+#define BFI_LMSG_PL_WSZ \
+ ((BFI_LMSG_SZ - sizeof(struct bfi_mhdr_s)) / 4)
+
+struct bfi_msg_s {
+ struct bfi_mhdr_s mhdr;
+ u32 pl[BFI_LMSG_PL_WSZ];
+};
+
+/**
+ * Mailbox message structure
+ */
+#define BFI_MBMSG_SZ 7
+struct bfi_mbmsg_s {
+ struct bfi_mhdr_s mh;
+ u32 pl[BFI_MBMSG_SZ];
+};
+
+/**
+ * Message Classes
+ */
+enum bfi_mclass {
+ BFI_MC_IOC = 1, /* IO Controller (IOC) */
+ BFI_MC_DIAG = 2, /* Diagnostic Msgs */
+ BFI_MC_FLASH = 3, /* Flash message class */
+ BFI_MC_CEE = 4,
+ BFI_MC_FC_PORT = 5, /* FC port */
+ BFI_MC_IOCFC = 6, /* FC - IO Controller (IOC) */
+ BFI_MC_LL = 7, /* Link Layer */
+ BFI_MC_UF = 8, /* Unsolicited frame receive */
+ BFI_MC_FCXP = 9, /* FC Transport */
+ BFI_MC_LPS = 10, /* lport fc login services */
+ BFI_MC_RPORT = 11, /* Remote port */
+ BFI_MC_ITNIM = 12, /* I-T nexus (Initiator mode) */
+ BFI_MC_IOIM_READ = 13, /* read IO (Initiator mode) */
+ BFI_MC_IOIM_WRITE = 14, /* write IO (Initiator mode) */
+ BFI_MC_IOIM_IO = 15, /* IO (Initiator mode) */
+ BFI_MC_IOIM = 16, /* IO (Initiator mode) */
+ BFI_MC_IOIM_IOCOM = 17, /* good IO completion */
+ BFI_MC_TSKIM = 18, /* Initiator Task management */
+ BFI_MC_SBOOT = 19, /* SAN boot services */
+ BFI_MC_IPFC = 20, /* IP over FC Msgs */
+ BFI_MC_PORT = 21, /* Physical port */
+ BFI_MC_MAX = 32
+};
+
+#define BFI_IOC_MAX_CQS 4
+#define BFI_IOC_MAX_CQS_ASIC 8
+#define BFI_IOC_MSGLEN_MAX 32 /* 32 bytes */
+
+#pragma pack()
+
+#endif /* __BFI_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/*
+ * bfi_boot.h
+ */
+
+#ifndef __BFI_BOOT_H__
+#define __BFI_BOOT_H__
+
+#define BFI_BOOT_TYPE_OFF 8
+#define BFI_BOOT_PARAM_OFF 12
+
+#define BFI_BOOT_TYPE_NORMAL 0 /* param is device id */
+#define BFI_BOOT_TYPE_FLASH 1
+#define BFI_BOOT_TYPE_MEMTEST 2
+
+#define BFI_BOOT_MEMTEST_RES_ADDR 0x900
+#define BFI_BOOT_MEMTEST_RES_SIG 0xA0A1A2A3
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * bfi_cbreg.h crossbow host block register definitions
+ *
+ * !!! Do not edit. Auto generated. !!!
+ */
+
+#ifndef __BFI_CBREG_H__
+#define __BFI_CBREG_H__
+
+
+#define HOSTFN0_INT_STATUS 0x00014000
+#define __HOSTFN0_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN0_INT_STATUS_LVL_SH 20
+#define __HOSTFN0_INT_STATUS_LVL(_v) ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
+#define __HOSTFN0_INT_STATUS_P 0x000fffff
+#define HOSTFN0_INT_MSK 0x00014004
+#define HOST_PAGE_NUM_FN0 0x00014008
+#define __HOST_PAGE_NUM_FN 0x000001ff
+#define HOSTFN1_INT_STATUS 0x00014100
+#define __HOSTFN1_INT_STAT_LVL_MK 0x00f00000
+#define __HOSTFN1_INT_STAT_LVL_SH 20
+#define __HOSTFN1_INT_STAT_LVL(_v) ((_v) << __HOSTFN1_INT_STAT_LVL_SH)
+#define __HOSTFN1_INT_STAT_P 0x000fffff
+#define HOSTFN1_INT_MSK 0x00014104
+#define HOST_PAGE_NUM_FN1 0x00014108
+#define APP_PLL_400_CTL_REG 0x00014204
+#define __P_400_PLL_LOCK 0x80000000
+#define __APP_PLL_400_SRAM_USE_100MHZ 0x00100000
+#define __APP_PLL_400_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_400_RESET_TIMER_SH 17
+#define __APP_PLL_400_RESET_TIMER(_v) ((_v) << __APP_PLL_400_RESET_TIMER_SH)
+#define __APP_PLL_400_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_400_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_400_CNTLMT0_1_SH 14
+#define __APP_PLL_400_CNTLMT0_1(_v) ((_v) << __APP_PLL_400_CNTLMT0_1_SH)
+#define __APP_PLL_400_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_400_JITLMT0_1_SH 12
+#define __APP_PLL_400_JITLMT0_1(_v) ((_v) << __APP_PLL_400_JITLMT0_1_SH)
+#define __APP_PLL_400_HREF 0x00000800
+#define __APP_PLL_400_HDIV 0x00000400
+#define __APP_PLL_400_P0_1_MK 0x00000300
+#define __APP_PLL_400_P0_1_SH 8
+#define __APP_PLL_400_P0_1(_v) ((_v) << __APP_PLL_400_P0_1_SH)
+#define __APP_PLL_400_Z0_2_MK 0x000000e0
+#define __APP_PLL_400_Z0_2_SH 5
+#define __APP_PLL_400_Z0_2(_v) ((_v) << __APP_PLL_400_Z0_2_SH)
+#define __APP_PLL_400_RSEL200500 0x00000010
+#define __APP_PLL_400_ENARST 0x00000008
+#define __APP_PLL_400_BYPASS 0x00000004
+#define __APP_PLL_400_LRESETN 0x00000002
+#define __APP_PLL_400_ENABLE 0x00000001
+#define APP_PLL_212_CTL_REG 0x00014208
+#define __P_212_PLL_LOCK 0x80000000
+#define __APP_PLL_212_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_212_RESET_TIMER_SH 17
+#define __APP_PLL_212_RESET_TIMER(_v) ((_v) << __APP_PLL_212_RESET_TIMER_SH)
+#define __APP_PLL_212_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_212_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_212_CNTLMT0_1_SH 14
+#define __APP_PLL_212_CNTLMT0_1(_v) ((_v) << __APP_PLL_212_CNTLMT0_1_SH)
+#define __APP_PLL_212_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_212_JITLMT0_1_SH 12
+#define __APP_PLL_212_JITLMT0_1(_v) ((_v) << __APP_PLL_212_JITLMT0_1_SH)
+#define __APP_PLL_212_HREF 0x00000800
+#define __APP_PLL_212_HDIV 0x00000400
+#define __APP_PLL_212_P0_1_MK 0x00000300
+#define __APP_PLL_212_P0_1_SH 8
+#define __APP_PLL_212_P0_1(_v) ((_v) << __APP_PLL_212_P0_1_SH)
+#define __APP_PLL_212_Z0_2_MK 0x000000e0
+#define __APP_PLL_212_Z0_2_SH 5
+#define __APP_PLL_212_Z0_2(_v) ((_v) << __APP_PLL_212_Z0_2_SH)
+#define __APP_PLL_212_RSEL200500 0x00000010
+#define __APP_PLL_212_ENARST 0x00000008
+#define __APP_PLL_212_BYPASS 0x00000004
+#define __APP_PLL_212_LRESETN 0x00000002
+#define __APP_PLL_212_ENABLE 0x00000001
+#define HOST_SEM0_REG 0x00014230
+#define __HOST_SEMAPHORE 0x00000001
+#define HOST_SEM1_REG 0x00014234
+#define HOST_SEM2_REG 0x00014238
+#define HOST_SEM3_REG 0x0001423c
+#define HOST_SEM0_INFO_REG 0x00014240
+#define HOST_SEM1_INFO_REG 0x00014244
+#define HOST_SEM2_INFO_REG 0x00014248
+#define HOST_SEM3_INFO_REG 0x0001424c
+#define HOSTFN0_LPU0_CMD_STAT 0x00019000
+#define __HOSTFN0_LPU0_MBOX_INFO_MK 0xfffffffe
+#define __HOSTFN0_LPU0_MBOX_INFO_SH 1
+#define __HOSTFN0_LPU0_MBOX_INFO(_v) ((_v) << __HOSTFN0_LPU0_MBOX_INFO_SH)
+#define __HOSTFN0_LPU0_MBOX_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN0_CMD_STAT 0x00019008
+#define __LPU0_HOSTFN0_MBOX_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN0_MBOX_INFO_SH 1
+#define __LPU0_HOSTFN0_MBOX_INFO(_v) ((_v) << __LPU0_HOSTFN0_MBOX_INFO_SH)
+#define __LPU0_HOSTFN0_MBOX_CMD_STATUS 0x00000001
+#define HOSTFN1_LPU1_CMD_STAT 0x00019014
+#define __HOSTFN1_LPU1_MBOX_INFO_MK 0xfffffffe
+#define __HOSTFN1_LPU1_MBOX_INFO_SH 1
+#define __HOSTFN1_LPU1_MBOX_INFO(_v) ((_v) << __HOSTFN1_LPU1_MBOX_INFO_SH)
+#define __HOSTFN1_LPU1_MBOX_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN1_CMD_STAT 0x0001901c
+#define __LPU1_HOSTFN1_MBOX_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN1_MBOX_INFO_SH 1
+#define __LPU1_HOSTFN1_MBOX_INFO(_v) ((_v) << __LPU1_HOSTFN1_MBOX_INFO_SH)
+#define __LPU1_HOSTFN1_MBOX_CMD_STATUS 0x00000001
+#define CPE_Q0_DEPTH 0x00010014
+#define CPE_Q0_PI 0x0001001c
+#define CPE_Q0_CI 0x00010020
+#define CPE_Q1_DEPTH 0x00010034
+#define CPE_Q1_PI 0x0001003c
+#define CPE_Q1_CI 0x00010040
+#define CPE_Q2_DEPTH 0x00010054
+#define CPE_Q2_PI 0x0001005c
+#define CPE_Q2_CI 0x00010060
+#define CPE_Q3_DEPTH 0x00010074
+#define CPE_Q3_PI 0x0001007c
+#define CPE_Q3_CI 0x00010080
+#define CPE_Q4_DEPTH 0x00010094
+#define CPE_Q4_PI 0x0001009c
+#define CPE_Q4_CI 0x000100a0
+#define CPE_Q5_DEPTH 0x000100b4
+#define CPE_Q5_PI 0x000100bc
+#define CPE_Q5_CI 0x000100c0
+#define CPE_Q6_DEPTH 0x000100d4
+#define CPE_Q6_PI 0x000100dc
+#define CPE_Q6_CI 0x000100e0
+#define CPE_Q7_DEPTH 0x000100f4
+#define CPE_Q7_PI 0x000100fc
+#define CPE_Q7_CI 0x00010100
+#define RME_Q0_DEPTH 0x00011014
+#define RME_Q0_PI 0x0001101c
+#define RME_Q0_CI 0x00011020
+#define RME_Q1_DEPTH 0x00011034
+#define RME_Q1_PI 0x0001103c
+#define RME_Q1_CI 0x00011040
+#define RME_Q2_DEPTH 0x00011054
+#define RME_Q2_PI 0x0001105c
+#define RME_Q2_CI 0x00011060
+#define RME_Q3_DEPTH 0x00011074
+#define RME_Q3_PI 0x0001107c
+#define RME_Q3_CI 0x00011080
+#define RME_Q4_DEPTH 0x00011094
+#define RME_Q4_PI 0x0001109c
+#define RME_Q4_CI 0x000110a0
+#define RME_Q5_DEPTH 0x000110b4
+#define RME_Q5_PI 0x000110bc
+#define RME_Q5_CI 0x000110c0
+#define RME_Q6_DEPTH 0x000110d4
+#define RME_Q6_PI 0x000110dc
+#define RME_Q6_CI 0x000110e0
+#define RME_Q7_DEPTH 0x000110f4
+#define RME_Q7_PI 0x000110fc
+#define RME_Q7_CI 0x00011100
+#define PSS_CTL_REG 0x00018800
+#define __PSS_I2C_CLK_DIV_MK 0x00030000
+#define __PSS_I2C_CLK_DIV_SH 16
+#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
+#define __PSS_LMEM_INIT_DONE 0x00001000
+#define __PSS_LMEM_RESET 0x00000200
+#define __PSS_LMEM_INIT_EN 0x00000100
+#define __PSS_LPU1_RESET 0x00000002
+#define __PSS_LPU0_RESET 0x00000001
+
+
+/*
+ * These definitions are either in error/missing in spec. Its auto-generated
+ * from hard coded values in regparse.pl.
+ */
+#define __EMPHPOST_AT_4G_MK_FIX 0x0000001c
+#define __EMPHPOST_AT_4G_SH_FIX 0x00000002
+#define __EMPHPRE_AT_4G_FIX 0x00000003
+#define __SFP_TXRATE_EN_FIX 0x00000100
+#define __SFP_RXRATE_EN_FIX 0x00000080
+
+
+/*
+ * These register definitions are auto-generated from hard coded values
+ * in regparse.pl.
+ */
+#define HOSTFN0_LPU_MBOX0_0 0x00019200
+#define HOSTFN1_LPU_MBOX0_8 0x00019260
+#define LPU_HOSTFN0_MBOX0_0 0x00019280
+#define LPU_HOSTFN1_MBOX0_8 0x000192e0
+
+
+/*
+ * These register mapping definitions are auto-generated from mapping tables
+ * in regparse.pl.
+ */
+#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
+#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
+#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
+#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
+#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
+
+#define CPE_Q_DEPTH(__n) \
+ (CPE_Q0_DEPTH + (__n) * (CPE_Q1_DEPTH - CPE_Q0_DEPTH))
+#define CPE_Q_PI(__n) \
+ (CPE_Q0_PI + (__n) * (CPE_Q1_PI - CPE_Q0_PI))
+#define CPE_Q_CI(__n) \
+ (CPE_Q0_CI + (__n) * (CPE_Q1_CI - CPE_Q0_CI))
+#define RME_Q_DEPTH(__n) \
+ (RME_Q0_DEPTH + (__n) * (RME_Q1_DEPTH - RME_Q0_DEPTH))
+#define RME_Q_PI(__n) \
+ (RME_Q0_PI + (__n) * (RME_Q1_PI - RME_Q0_PI))
+#define RME_Q_CI(__n) \
+ (RME_Q0_CI + (__n) * (RME_Q1_CI - RME_Q0_CI))
+
+#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define CPE_Q_MASK(__q) ((__q) & 0x3)
+#define RME_Q_MASK(__q) ((__q) & 0x3)
+
+
+/*
+ * PCI MSI-X vector defines
+ */
+enum {
+ BFA_MSIX_CPE_Q0 = 0,
+ BFA_MSIX_CPE_Q1 = 1,
+ BFA_MSIX_CPE_Q2 = 2,
+ BFA_MSIX_CPE_Q3 = 3,
+ BFA_MSIX_CPE_Q4 = 4,
+ BFA_MSIX_CPE_Q5 = 5,
+ BFA_MSIX_CPE_Q6 = 6,
+ BFA_MSIX_CPE_Q7 = 7,
+ BFA_MSIX_RME_Q0 = 8,
+ BFA_MSIX_RME_Q1 = 9,
+ BFA_MSIX_RME_Q2 = 10,
+ BFA_MSIX_RME_Q3 = 11,
+ BFA_MSIX_RME_Q4 = 12,
+ BFA_MSIX_RME_Q5 = 13,
+ BFA_MSIX_RME_Q6 = 14,
+ BFA_MSIX_RME_Q7 = 15,
+ BFA_MSIX_ERR_EMC = 16,
+ BFA_MSIX_ERR_LPU0 = 17,
+ BFA_MSIX_ERR_LPU1 = 18,
+ BFA_MSIX_ERR_PSS = 19,
+ BFA_MSIX_MBOX_LPU0 = 20,
+ BFA_MSIX_MBOX_LPU1 = 21,
+ BFA_MSIX_CB_MAX = 22,
+};
+
+/*
+ * And corresponding host interrupt status bit field defines
+ */
+#define __HFN_INT_CPE_Q0 0x00000001U
+#define __HFN_INT_CPE_Q1 0x00000002U
+#define __HFN_INT_CPE_Q2 0x00000004U
+#define __HFN_INT_CPE_Q3 0x00000008U
+#define __HFN_INT_CPE_Q4 0x00000010U
+#define __HFN_INT_CPE_Q5 0x00000020U
+#define __HFN_INT_CPE_Q6 0x00000040U
+#define __HFN_INT_CPE_Q7 0x00000080U
+#define __HFN_INT_RME_Q0 0x00000100U
+#define __HFN_INT_RME_Q1 0x00000200U
+#define __HFN_INT_RME_Q2 0x00000400U
+#define __HFN_INT_RME_Q3 0x00000800U
+#define __HFN_INT_RME_Q4 0x00001000U
+#define __HFN_INT_RME_Q5 0x00002000U
+#define __HFN_INT_RME_Q6 0x00004000U
+#define __HFN_INT_RME_Q7 0x00008000U
+#define __HFN_INT_ERR_EMC 0x00010000U
+#define __HFN_INT_ERR_LPU0 0x00020000U
+#define __HFN_INT_ERR_LPU1 0x00040000U
+#define __HFN_INT_ERR_PSS 0x00080000U
+#define __HFN_INT_MBOX_LPU0 0x00100000U
+#define __HFN_INT_MBOX_LPU1 0x00200000U
+#define __HFN_INT_MBOX1_LPU0 0x00400000U
+#define __HFN_INT_MBOX1_LPU1 0x00800000U
+#define __HFN_INT_CPE_MASK 0x000000ffU
+#define __HFN_INT_RME_MASK 0x0000ff00U
+
+
+/*
+ * crossbow memory map.
+ */
+#define PSS_SMEM_PAGE_START 0x8000
+#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
+#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
+
+/*
+ * End of crossbow memory map
+ */
+
+
+#endif /* __BFI_CBREG_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+/**
+ * Copyright (c) 2006-2009 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * bfi_dcbx.h BFI Interface (Mailbox commands and related structures)
+ * between host driver and DCBX/LLDP firmware module.
+ *
+**/
+
+#ifndef __BFI_CEE_H__
+#define __BFI_CEE_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+
+enum bfi_cee_h2i_msgs_e {
+ BFI_CEE_H2I_GET_CFG_REQ = 1,
+ BFI_CEE_H2I_RESET_STATS = 2,
+ BFI_CEE_H2I_GET_STATS_REQ = 3,
+};
+
+
+enum bfi_cee_i2h_msgs_e {
+ BFI_CEE_I2H_GET_CFG_RSP = BFA_I2HM(1),
+ BFI_CEE_I2H_RESET_STATS_RSP = BFA_I2HM(2),
+ BFI_CEE_I2H_GET_STATS_RSP = BFA_I2HM(3),
+};
+
+
+/* Data structures */
+
+/*
+ * BFI_CEE_H2I_RESET_STATS
+ */
+struct bfi_lldp_reset_stats_s {
+ struct bfi_mhdr_s mh;
+};
+
+/*
+ * BFI_CEE_H2I_RESET_STATS
+ */
+struct bfi_cee_reset_stats_s {
+ struct bfi_mhdr_s mh;
+};
+
+/*
+ * BFI_CEE_H2I_GET_CFG_REQ
+ */
+struct bfi_cee_get_req_s {
+ struct bfi_mhdr_s mh;
+ union bfi_addr_u dma_addr;
+};
+
+
+/*
+ * BFI_CEE_I2H_GET_CFG_RSP
+ */
+struct bfi_cee_get_rsp_s {
+ struct bfi_mhdr_s mh;
+ u8 cmd_status;
+ u8 rsvd[3];
+};
+
+/*
+ * BFI_CEE_H2I_GET_STATS_REQ
+ */
+struct bfi_cee_stats_req_s {
+ struct bfi_mhdr_s mh;
+ union bfi_addr_u dma_addr;
+};
+
+
+/*
+ * BFI_CEE_I2H_GET_STATS_RSP
+ */
+struct bfi_cee_stats_rsp_s {
+ struct bfi_mhdr_s mh;
+ u8 cmd_status;
+ u8 rsvd[3];
+};
+
+
+
+union bfi_cee_h2i_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_cee_get_req_s get_req;
+ struct bfi_cee_stats_req_s stats_req;
+};
+
+
+union bfi_cee_i2h_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_cee_get_rsp_s get_rsp;
+ struct bfi_cee_stats_rsp_s stats_rsp;
+};
+
+#pragma pack()
+
+
+#endif /* __BFI_CEE_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * bfi_ctreg.h catapult host block register definitions
+ *
+ * !!! Do not edit. Auto generated. !!!
+ */
+
+#ifndef __BFI_CTREG_H__
+#define __BFI_CTREG_H__
+
+
+#define HOSTFN0_LPU_MBOX0_0 0x00019200
+#define HOSTFN1_LPU_MBOX0_8 0x00019260
+#define LPU_HOSTFN0_MBOX0_0 0x00019280
+#define LPU_HOSTFN1_MBOX0_8 0x000192e0
+#define HOSTFN2_LPU_MBOX0_0 0x00019400
+#define HOSTFN3_LPU_MBOX0_8 0x00019460
+#define LPU_HOSTFN2_MBOX0_0 0x00019480
+#define LPU_HOSTFN3_MBOX0_8 0x000194e0
+#define HOSTFN0_INT_STATUS 0x00014000
+#define __HOSTFN0_HALT_OCCURRED 0x01000000
+#define __HOSTFN0_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN0_INT_STATUS_LVL_SH 20
+#define __HOSTFN0_INT_STATUS_LVL(_v) ((_v) << __HOSTFN0_INT_STATUS_LVL_SH)
+#define __HOSTFN0_INT_STATUS_P_MK 0x000f0000
+#define __HOSTFN0_INT_STATUS_P_SH 16
+#define __HOSTFN0_INT_STATUS_P(_v) ((_v) << __HOSTFN0_INT_STATUS_P_SH)
+#define __HOSTFN0_INT_STATUS_F 0x0000ffff
+#define HOSTFN0_INT_MSK 0x00014004
+#define HOST_PAGE_NUM_FN0 0x00014008
+#define __HOST_PAGE_NUM_FN 0x000001ff
+#define HOST_MSIX_ERR_INDEX_FN0 0x0001400c
+#define __MSIX_ERR_INDEX_FN 0x000001ff
+#define HOSTFN1_INT_STATUS 0x00014100
+#define __HOSTFN1_HALT_OCCURRED 0x01000000
+#define __HOSTFN1_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN1_INT_STATUS_LVL_SH 20
+#define __HOSTFN1_INT_STATUS_LVL(_v) ((_v) << __HOSTFN1_INT_STATUS_LVL_SH)
+#define __HOSTFN1_INT_STATUS_P_MK 0x000f0000
+#define __HOSTFN1_INT_STATUS_P_SH 16
+#define __HOSTFN1_INT_STATUS_P(_v) ((_v) << __HOSTFN1_INT_STATUS_P_SH)
+#define __HOSTFN1_INT_STATUS_F 0x0000ffff
+#define HOSTFN1_INT_MSK 0x00014104
+#define HOST_PAGE_NUM_FN1 0x00014108
+#define HOST_MSIX_ERR_INDEX_FN1 0x0001410c
+#define APP_PLL_425_CTL_REG 0x00014204
+#define __P_425_PLL_LOCK 0x80000000
+#define __APP_PLL_425_SRAM_USE_100MHZ 0x00100000
+#define __APP_PLL_425_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_425_RESET_TIMER_SH 17
+#define __APP_PLL_425_RESET_TIMER(_v) ((_v) << __APP_PLL_425_RESET_TIMER_SH)
+#define __APP_PLL_425_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_425_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_425_CNTLMT0_1_SH 14
+#define __APP_PLL_425_CNTLMT0_1(_v) ((_v) << __APP_PLL_425_CNTLMT0_1_SH)
+#define __APP_PLL_425_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_425_JITLMT0_1_SH 12
+#define __APP_PLL_425_JITLMT0_1(_v) ((_v) << __APP_PLL_425_JITLMT0_1_SH)
+#define __APP_PLL_425_HREF 0x00000800
+#define __APP_PLL_425_HDIV 0x00000400
+#define __APP_PLL_425_P0_1_MK 0x00000300
+#define __APP_PLL_425_P0_1_SH 8
+#define __APP_PLL_425_P0_1(_v) ((_v) << __APP_PLL_425_P0_1_SH)
+#define __APP_PLL_425_Z0_2_MK 0x000000e0
+#define __APP_PLL_425_Z0_2_SH 5
+#define __APP_PLL_425_Z0_2(_v) ((_v) << __APP_PLL_425_Z0_2_SH)
+#define __APP_PLL_425_RSEL200500 0x00000010
+#define __APP_PLL_425_ENARST 0x00000008
+#define __APP_PLL_425_BYPASS 0x00000004
+#define __APP_PLL_425_LRESETN 0x00000002
+#define __APP_PLL_425_ENABLE 0x00000001
+#define APP_PLL_312_CTL_REG 0x00014208
+#define __P_312_PLL_LOCK 0x80000000
+#define __ENABLE_MAC_AHB_1 0x00800000
+#define __ENABLE_MAC_AHB_0 0x00400000
+#define __ENABLE_MAC_1 0x00200000
+#define __ENABLE_MAC_0 0x00100000
+#define __APP_PLL_312_RESET_TIMER_MK 0x000e0000
+#define __APP_PLL_312_RESET_TIMER_SH 17
+#define __APP_PLL_312_RESET_TIMER(_v) ((_v) << __APP_PLL_312_RESET_TIMER_SH)
+#define __APP_PLL_312_LOGIC_SOFT_RESET 0x00010000
+#define __APP_PLL_312_CNTLMT0_1_MK 0x0000c000
+#define __APP_PLL_312_CNTLMT0_1_SH 14
+#define __APP_PLL_312_CNTLMT0_1(_v) ((_v) << __APP_PLL_312_CNTLMT0_1_SH)
+#define __APP_PLL_312_JITLMT0_1_MK 0x00003000
+#define __APP_PLL_312_JITLMT0_1_SH 12
+#define __APP_PLL_312_JITLMT0_1(_v) ((_v) << __APP_PLL_312_JITLMT0_1_SH)
+#define __APP_PLL_312_HREF 0x00000800
+#define __APP_PLL_312_HDIV 0x00000400
+#define __APP_PLL_312_P0_1_MK 0x00000300
+#define __APP_PLL_312_P0_1_SH 8
+#define __APP_PLL_312_P0_1(_v) ((_v) << __APP_PLL_312_P0_1_SH)
+#define __APP_PLL_312_Z0_2_MK 0x000000e0
+#define __APP_PLL_312_Z0_2_SH 5
+#define __APP_PLL_312_Z0_2(_v) ((_v) << __APP_PLL_312_Z0_2_SH)
+#define __APP_PLL_312_RSEL200500 0x00000010
+#define __APP_PLL_312_ENARST 0x00000008
+#define __APP_PLL_312_BYPASS 0x00000004
+#define __APP_PLL_312_LRESETN 0x00000002
+#define __APP_PLL_312_ENABLE 0x00000001
+#define MBIST_CTL_REG 0x00014220
+#define __EDRAM_BISTR_START 0x00000004
+#define __MBIST_RESET 0x00000002
+#define __MBIST_START 0x00000001
+#define MBIST_STAT_REG 0x00014224
+#define __EDRAM_BISTR_STATUS 0x00000008
+#define __EDRAM_BISTR_DONE 0x00000004
+#define __MEM_BIT_STATUS 0x00000002
+#define __MBIST_DONE 0x00000001
+#define HOST_SEM0_REG 0x00014230
+#define __HOST_SEMAPHORE 0x00000001
+#define HOST_SEM1_REG 0x00014234
+#define HOST_SEM2_REG 0x00014238
+#define HOST_SEM3_REG 0x0001423c
+#define HOST_SEM0_INFO_REG 0x00014240
+#define HOST_SEM1_INFO_REG 0x00014244
+#define HOST_SEM2_INFO_REG 0x00014248
+#define HOST_SEM3_INFO_REG 0x0001424c
+#define ETH_MAC_SER_REG 0x00014288
+#define __APP_EMS_CKBUFAMPIN 0x00000020
+#define __APP_EMS_REFCLKSEL 0x00000010
+#define __APP_EMS_CMLCKSEL 0x00000008
+#define __APP_EMS_REFCKBUFEN2 0x00000004
+#define __APP_EMS_REFCKBUFEN1 0x00000002
+#define __APP_EMS_CHANNEL_SEL 0x00000001
+#define HOSTFN2_INT_STATUS 0x00014300
+#define __HOSTFN2_HALT_OCCURRED 0x01000000
+#define __HOSTFN2_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN2_INT_STATUS_LVL_SH 20
+#define __HOSTFN2_INT_STATUS_LVL(_v) ((_v) << __HOSTFN2_INT_STATUS_LVL_SH)
+#define __HOSTFN2_INT_STATUS_P_MK 0x000f0000
+#define __HOSTFN2_INT_STATUS_P_SH 16
+#define __HOSTFN2_INT_STATUS_P(_v) ((_v) << __HOSTFN2_INT_STATUS_P_SH)
+#define __HOSTFN2_INT_STATUS_F 0x0000ffff
+#define HOSTFN2_INT_MSK 0x00014304
+#define HOST_PAGE_NUM_FN2 0x00014308
+#define HOST_MSIX_ERR_INDEX_FN2 0x0001430c
+#define HOSTFN3_INT_STATUS 0x00014400
+#define __HALT_OCCURRED 0x01000000
+#define __HOSTFN3_INT_STATUS_LVL_MK 0x00f00000
+#define __HOSTFN3_INT_STATUS_LVL_SH 20
+#define __HOSTFN3_INT_STATUS_LVL(_v) ((_v) << __HOSTFN3_INT_STATUS_LVL_SH)
+#define __HOSTFN3_INT_STATUS_P_MK 0x000f0000
+#define __HOSTFN3_INT_STATUS_P_SH 16
+#define __HOSTFN3_INT_STATUS_P(_v) ((_v) << __HOSTFN3_INT_STATUS_P_SH)
+#define __HOSTFN3_INT_STATUS_F 0x0000ffff
+#define HOSTFN3_INT_MSK 0x00014404
+#define HOST_PAGE_NUM_FN3 0x00014408
+#define HOST_MSIX_ERR_INDEX_FN3 0x0001440c
+#define FNC_ID_REG 0x00014600
+#define __FUNCTION_NUMBER 0x00000007
+#define FNC_PERS_REG 0x00014604
+#define __F3_FUNCTION_ACTIVE 0x80000000
+#define __F3_FUNCTION_MODE 0x40000000
+#define __F3_PORT_MAP_MK 0x30000000
+#define __F3_PORT_MAP_SH 28
+#define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH)
+#define __F3_VM_MODE 0x08000000
+#define __F3_INTX_STATUS_MK 0x07000000
+#define __F3_INTX_STATUS_SH 24
+#define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH)
+#define __F2_FUNCTION_ACTIVE 0x00800000
+#define __F2_FUNCTION_MODE 0x00400000
+#define __F2_PORT_MAP_MK 0x00300000
+#define __F2_PORT_MAP_SH 20
+#define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH)
+#define __F2_VM_MODE 0x00080000
+#define __F2_INTX_STATUS_MK 0x00070000
+#define __F2_INTX_STATUS_SH 16
+#define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH)
+#define __F1_FUNCTION_ACTIVE 0x00008000
+#define __F1_FUNCTION_MODE 0x00004000
+#define __F1_PORT_MAP_MK 0x00003000
+#define __F1_PORT_MAP_SH 12
+#define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH)
+#define __F1_VM_MODE 0x00000800
+#define __F1_INTX_STATUS_MK 0x00000700
+#define __F1_INTX_STATUS_SH 8
+#define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH)
+#define __F0_FUNCTION_ACTIVE 0x00000080
+#define __F0_FUNCTION_MODE 0x00000040
+#define __F0_PORT_MAP_MK 0x00000030
+#define __F0_PORT_MAP_SH 4
+#define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH)
+#define __F0_VM_MODE 0x00000008
+#define __F0_INTX_STATUS 0x00000007
+enum {
+ __F0_INTX_STATUS_MSIX = 0x0,
+ __F0_INTX_STATUS_INTA = 0x1,
+ __F0_INTX_STATUS_INTB = 0x2,
+ __F0_INTX_STATUS_INTC = 0x3,
+ __F0_INTX_STATUS_INTD = 0x4,
+};
+#define OP_MODE 0x0001460c
+#define __APP_ETH_CLK_LOWSPEED 0x00000004
+#define __GLOBAL_CORECLK_HALFSPEED 0x00000002
+#define __GLOBAL_FCOE_MODE 0x00000001
+#define HOST_SEM4_REG 0x00014610
+#define HOST_SEM5_REG 0x00014614
+#define HOST_SEM6_REG 0x00014618
+#define HOST_SEM7_REG 0x0001461c
+#define HOST_SEM4_INFO_REG 0x00014620
+#define HOST_SEM5_INFO_REG 0x00014624
+#define HOST_SEM6_INFO_REG 0x00014628
+#define HOST_SEM7_INFO_REG 0x0001462c
+#define HOSTFN0_LPU0_MBOX0_CMD_STAT 0x00019000
+#define __HOSTFN0_LPU0_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN0_LPU0_MBOX0_INFO_SH 1
+#define __HOSTFN0_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN0_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN0_LPU0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN0_LPU1_MBOX0_CMD_STAT 0x00019004
+#define __HOSTFN0_LPU1_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN0_LPU1_MBOX0_INFO_SH 1
+#define __HOSTFN0_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN0_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN0_LPU1_MBOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN0_MBOX0_CMD_STAT 0x00019008
+#define __LPU0_HOSTFN0_MBOX0_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN0_MBOX0_INFO_SH 1
+#define __LPU0_HOSTFN0_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN0_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN0_MBOX0_CMD_STAT 0x0001900c
+#define __LPU1_HOSTFN0_MBOX0_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN0_MBOX0_INFO_SH 1
+#define __LPU1_HOSTFN0_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN0_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN1_LPU0_MBOX0_CMD_STAT 0x00019010
+#define __HOSTFN1_LPU0_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN1_LPU0_MBOX0_INFO_SH 1
+#define __HOSTFN1_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN1_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN1_LPU0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN1_LPU1_MBOX0_CMD_STAT 0x00019014
+#define __HOSTFN1_LPU1_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN1_LPU1_MBOX0_INFO_SH 1
+#define __HOSTFN1_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN1_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN1_LPU1_MBOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN1_MBOX0_CMD_STAT 0x00019018
+#define __LPU0_HOSTFN1_MBOX0_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN1_MBOX0_INFO_SH 1
+#define __LPU0_HOSTFN1_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN1_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN1_MBOX0_CMD_STAT 0x0001901c
+#define __LPU1_HOSTFN1_MBOX0_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN1_MBOX0_INFO_SH 1
+#define __LPU1_HOSTFN1_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN1_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN1_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN2_LPU0_MBOX0_CMD_STAT 0x00019150
+#define __HOSTFN2_LPU0_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN2_LPU0_MBOX0_INFO_SH 1
+#define __HOSTFN2_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN2_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN2_LPU0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN2_LPU1_MBOX0_CMD_STAT 0x00019154
+#define __HOSTFN2_LPU1_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN2_LPU1_MBOX0_INFO_SH 1
+#define __HOSTFN2_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN2_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN2_LPU1_MBOX0BOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN2_MBOX0_CMD_STAT 0x00019158
+#define __LPU0_HOSTFN2_MBOX0_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN2_MBOX0_INFO_SH 1
+#define __LPU0_HOSTFN2_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN2_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN2_MBOX0_CMD_STAT 0x0001915c
+#define __LPU1_HOSTFN2_MBOX0_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN2_MBOX0_INFO_SH 1
+#define __LPU1_HOSTFN2_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN2_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN2_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN3_LPU0_MBOX0_CMD_STAT 0x00019160
+#define __HOSTFN3_LPU0_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN3_LPU0_MBOX0_INFO_SH 1
+#define __HOSTFN3_LPU0_MBOX0_INFO(_v) ((_v) << __HOSTFN3_LPU0_MBOX0_INFO_SH)
+#define __HOSTFN3_LPU0_MBOX0_CMD_STATUS 0x00000001
+#define HOSTFN3_LPU1_MBOX0_CMD_STAT 0x00019164
+#define __HOSTFN3_LPU1_MBOX0_INFO_MK 0xfffffffe
+#define __HOSTFN3_LPU1_MBOX0_INFO_SH 1
+#define __HOSTFN3_LPU1_MBOX0_INFO(_v) ((_v) << __HOSTFN3_LPU1_MBOX0_INFO_SH)
+#define __HOSTFN3_LPU1_MBOX0_CMD_STATUS 0x00000001
+#define LPU0_HOSTFN3_MBOX0_CMD_STAT 0x00019168
+#define __LPU0_HOSTFN3_MBOX0_INFO_MK 0xfffffffe
+#define __LPU0_HOSTFN3_MBOX0_INFO_SH 1
+#define __LPU0_HOSTFN3_MBOX0_INFO(_v) ((_v) << __LPU0_HOSTFN3_MBOX0_INFO_SH)
+#define __LPU0_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
+#define LPU1_HOSTFN3_MBOX0_CMD_STAT 0x0001916c
+#define __LPU1_HOSTFN3_MBOX0_INFO_MK 0xfffffffe
+#define __LPU1_HOSTFN3_MBOX0_INFO_SH 1
+#define __LPU1_HOSTFN3_MBOX0_INFO(_v) ((_v) << __LPU1_HOSTFN3_MBOX0_INFO_SH)
+#define __LPU1_HOSTFN3_MBOX0_CMD_STATUS 0x00000001
+#define FW_INIT_HALT_P0 0x000191ac
+#define __FW_INIT_HALT_P 0x00000001
+#define FW_INIT_HALT_P1 0x000191bc
+#define CPE_PI_PTR_Q0 0x00038000
+#define __CPE_PI_UNUSED_MK 0xffff0000
+#define __CPE_PI_UNUSED_SH 16
+#define __CPE_PI_UNUSED(_v) ((_v) << __CPE_PI_UNUSED_SH)
+#define __CPE_PI_PTR 0x0000ffff
+#define CPE_PI_PTR_Q1 0x00038040
+#define CPE_CI_PTR_Q0 0x00038004
+#define __CPE_CI_UNUSED_MK 0xffff0000
+#define __CPE_CI_UNUSED_SH 16
+#define __CPE_CI_UNUSED(_v) ((_v) << __CPE_CI_UNUSED_SH)
+#define __CPE_CI_PTR 0x0000ffff
+#define CPE_CI_PTR_Q1 0x00038044
+#define CPE_DEPTH_Q0 0x00038008
+#define __CPE_DEPTH_UNUSED_MK 0xf8000000
+#define __CPE_DEPTH_UNUSED_SH 27
+#define __CPE_DEPTH_UNUSED(_v) ((_v) << __CPE_DEPTH_UNUSED_SH)
+#define __CPE_MSIX_VEC_INDEX_MK 0x07ff0000
+#define __CPE_MSIX_VEC_INDEX_SH 16
+#define __CPE_MSIX_VEC_INDEX(_v) ((_v) << __CPE_MSIX_VEC_INDEX_SH)
+#define __CPE_DEPTH 0x0000ffff
+#define CPE_DEPTH_Q1 0x00038048
+#define CPE_QCTRL_Q0 0x0003800c
+#define __CPE_CTRL_UNUSED30_MK 0xfc000000
+#define __CPE_CTRL_UNUSED30_SH 26
+#define __CPE_CTRL_UNUSED30(_v) ((_v) << __CPE_CTRL_UNUSED30_SH)
+#define __CPE_FUNC_INT_CTRL_MK 0x03000000
+#define __CPE_FUNC_INT_CTRL_SH 24
+#define __CPE_FUNC_INT_CTRL(_v) ((_v) << __CPE_FUNC_INT_CTRL_SH)
+enum {
+ __CPE_FUNC_INT_CTRL_DISABLE = 0x0,
+ __CPE_FUNC_INT_CTRL_F2NF = 0x1,
+ __CPE_FUNC_INT_CTRL_3QUART = 0x2,
+ __CPE_FUNC_INT_CTRL_HALF = 0x3,
+};
+#define __CPE_CTRL_UNUSED20_MK 0x00f00000
+#define __CPE_CTRL_UNUSED20_SH 20
+#define __CPE_CTRL_UNUSED20(_v) ((_v) << __CPE_CTRL_UNUSED20_SH)
+#define __CPE_SCI_TH_MK 0x000f0000
+#define __CPE_SCI_TH_SH 16
+#define __CPE_SCI_TH(_v) ((_v) << __CPE_SCI_TH_SH)
+#define __CPE_CTRL_UNUSED10_MK 0x0000c000
+#define __CPE_CTRL_UNUSED10_SH 14
+#define __CPE_CTRL_UNUSED10(_v) ((_v) << __CPE_CTRL_UNUSED10_SH)
+#define __CPE_ACK_PENDING 0x00002000
+#define __CPE_CTRL_UNUSED40_MK 0x00001c00
+#define __CPE_CTRL_UNUSED40_SH 10
+#define __CPE_CTRL_UNUSED40(_v) ((_v) << __CPE_CTRL_UNUSED40_SH)
+#define __CPE_PCIEID_MK 0x00000300
+#define __CPE_PCIEID_SH 8
+#define __CPE_PCIEID(_v) ((_v) << __CPE_PCIEID_SH)
+#define __CPE_CTRL_UNUSED00_MK 0x000000fe
+#define __CPE_CTRL_UNUSED00_SH 1
+#define __CPE_CTRL_UNUSED00(_v) ((_v) << __CPE_CTRL_UNUSED00_SH)
+#define __CPE_ESIZE 0x00000001
+#define CPE_QCTRL_Q1 0x0003804c
+#define __CPE_CTRL_UNUSED31_MK 0xfc000000
+#define __CPE_CTRL_UNUSED31_SH 26
+#define __CPE_CTRL_UNUSED31(_v) ((_v) << __CPE_CTRL_UNUSED31_SH)
+#define __CPE_CTRL_UNUSED21_MK 0x00f00000
+#define __CPE_CTRL_UNUSED21_SH 20
+#define __CPE_CTRL_UNUSED21(_v) ((_v) << __CPE_CTRL_UNUSED21_SH)
+#define __CPE_CTRL_UNUSED11_MK 0x0000c000
+#define __CPE_CTRL_UNUSED11_SH 14
+#define __CPE_CTRL_UNUSED11(_v) ((_v) << __CPE_CTRL_UNUSED11_SH)
+#define __CPE_CTRL_UNUSED41_MK 0x00001c00
+#define __CPE_CTRL_UNUSED41_SH 10
+#define __CPE_CTRL_UNUSED41(_v) ((_v) << __CPE_CTRL_UNUSED41_SH)
+#define __CPE_CTRL_UNUSED01_MK 0x000000fe
+#define __CPE_CTRL_UNUSED01_SH 1
+#define __CPE_CTRL_UNUSED01(_v) ((_v) << __CPE_CTRL_UNUSED01_SH)
+#define RME_PI_PTR_Q0 0x00038020
+#define __LATENCY_TIME_STAMP_MK 0xffff0000
+#define __LATENCY_TIME_STAMP_SH 16
+#define __LATENCY_TIME_STAMP(_v) ((_v) << __LATENCY_TIME_STAMP_SH)
+#define __RME_PI_PTR 0x0000ffff
+#define RME_PI_PTR_Q1 0x00038060
+#define RME_CI_PTR_Q0 0x00038024
+#define __DELAY_TIME_STAMP_MK 0xffff0000
+#define __DELAY_TIME_STAMP_SH 16
+#define __DELAY_TIME_STAMP(_v) ((_v) << __DELAY_TIME_STAMP_SH)
+#define __RME_CI_PTR 0x0000ffff
+#define RME_CI_PTR_Q1 0x00038064
+#define RME_DEPTH_Q0 0x00038028
+#define __RME_DEPTH_UNUSED_MK 0xf8000000
+#define __RME_DEPTH_UNUSED_SH 27
+#define __RME_DEPTH_UNUSED(_v) ((_v) << __RME_DEPTH_UNUSED_SH)
+#define __RME_MSIX_VEC_INDEX_MK 0x07ff0000
+#define __RME_MSIX_VEC_INDEX_SH 16
+#define __RME_MSIX_VEC_INDEX(_v) ((_v) << __RME_MSIX_VEC_INDEX_SH)
+#define __RME_DEPTH 0x0000ffff
+#define RME_DEPTH_Q1 0x00038068
+#define RME_QCTRL_Q0 0x0003802c
+#define __RME_INT_LATENCY_TIMER_MK 0xff000000
+#define __RME_INT_LATENCY_TIMER_SH 24
+#define __RME_INT_LATENCY_TIMER(_v) ((_v) << __RME_INT_LATENCY_TIMER_SH)
+#define __RME_INT_DELAY_TIMER_MK 0x00ff0000
+#define __RME_INT_DELAY_TIMER_SH 16
+#define __RME_INT_DELAY_TIMER(_v) ((_v) << __RME_INT_DELAY_TIMER_SH)
+#define __RME_INT_DELAY_DISABLE 0x00008000
+#define __RME_DLY_DELAY_DISABLE 0x00004000
+#define __RME_ACK_PENDING 0x00002000
+#define __RME_FULL_INTERRUPT_DISABLE 0x00001000
+#define __RME_CTRL_UNUSED10_MK 0x00000c00
+#define __RME_CTRL_UNUSED10_SH 10
+#define __RME_CTRL_UNUSED10(_v) ((_v) << __RME_CTRL_UNUSED10_SH)
+#define __RME_PCIEID_MK 0x00000300
+#define __RME_PCIEID_SH 8
+#define __RME_PCIEID(_v) ((_v) << __RME_PCIEID_SH)
+#define __RME_CTRL_UNUSED00_MK 0x000000fe
+#define __RME_CTRL_UNUSED00_SH 1
+#define __RME_CTRL_UNUSED00(_v) ((_v) << __RME_CTRL_UNUSED00_SH)
+#define __RME_ESIZE 0x00000001
+#define RME_QCTRL_Q1 0x0003806c
+#define __RME_CTRL_UNUSED11_MK 0x00000c00
+#define __RME_CTRL_UNUSED11_SH 10
+#define __RME_CTRL_UNUSED11(_v) ((_v) << __RME_CTRL_UNUSED11_SH)
+#define __RME_CTRL_UNUSED01_MK 0x000000fe
+#define __RME_CTRL_UNUSED01_SH 1
+#define __RME_CTRL_UNUSED01(_v) ((_v) << __RME_CTRL_UNUSED01_SH)
+#define PSS_CTL_REG 0x00018800
+#define __PSS_I2C_CLK_DIV_MK 0x007f0000
+#define __PSS_I2C_CLK_DIV_SH 16
+#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
+#define __PSS_LMEM_INIT_DONE 0x00001000
+#define __PSS_LMEM_RESET 0x00000200
+#define __PSS_LMEM_INIT_EN 0x00000100
+#define __PSS_LPU1_RESET 0x00000002
+#define __PSS_LPU0_RESET 0x00000001
+#define HQM_QSET0_RXQ_DRBL_P0 0x00038000
+#define __RXQ0_ADD_VECTORS_P 0x80000000
+#define __RXQ0_STOP_P 0x40000000
+#define __RXQ0_PRD_PTR_P 0x0000ffff
+#define HQM_QSET1_RXQ_DRBL_P0 0x00038080
+#define __RXQ1_ADD_VECTORS_P 0x80000000
+#define __RXQ1_STOP_P 0x40000000
+#define __RXQ1_PRD_PTR_P 0x0000ffff
+#define HQM_QSET0_RXQ_DRBL_P1 0x0003c000
+#define HQM_QSET1_RXQ_DRBL_P1 0x0003c080
+#define HQM_QSET0_TXQ_DRBL_P0 0x00038020
+#define __TXQ0_ADD_VECTORS_P 0x80000000
+#define __TXQ0_STOP_P 0x40000000
+#define __TXQ0_PRD_PTR_P 0x0000ffff
+#define HQM_QSET1_TXQ_DRBL_P0 0x000380a0
+#define __TXQ1_ADD_VECTORS_P 0x80000000
+#define __TXQ1_STOP_P 0x40000000
+#define __TXQ1_PRD_PTR_P 0x0000ffff
+#define HQM_QSET0_TXQ_DRBL_P1 0x0003c020
+#define HQM_QSET1_TXQ_DRBL_P1 0x0003c0a0
+#define HQM_QSET0_IB_DRBL_1_P0 0x00038040
+#define __IB1_0_ACK_P 0x80000000
+#define __IB1_0_DISABLE_P 0x40000000
+#define __IB1_0_NUM_OF_ACKED_EVENTS_P 0x0000ffff
+#define HQM_QSET1_IB_DRBL_1_P0 0x000380c0
+#define __IB1_1_ACK_P 0x80000000
+#define __IB1_1_DISABLE_P 0x40000000
+#define __IB1_1_NUM_OF_ACKED_EVENTS_P 0x0000ffff
+#define HQM_QSET0_IB_DRBL_1_P1 0x0003c040
+#define HQM_QSET1_IB_DRBL_1_P1 0x0003c0c0
+#define HQM_QSET0_IB_DRBL_2_P0 0x00038060
+#define __IB2_0_ACK_P 0x80000000
+#define __IB2_0_DISABLE_P 0x40000000
+#define __IB2_0_NUM_OF_ACKED_EVENTS_P 0x0000ffff
+#define HQM_QSET1_IB_DRBL_2_P0 0x000380e0
+#define __IB2_1_ACK_P 0x80000000
+#define __IB2_1_DISABLE_P 0x40000000
+#define __IB2_1_NUM_OF_ACKED_EVENTS_P 0x0000ffff
+#define HQM_QSET0_IB_DRBL_2_P1 0x0003c060
+#define HQM_QSET1_IB_DRBL_2_P1 0x0003c0e0
+
+
+/*
+ * These definitions are either in error/missing in spec. Its auto-generated
+ * from hard coded values in regparse.pl.
+ */
+#define __EMPHPOST_AT_4G_MK_FIX 0x0000001c
+#define __EMPHPOST_AT_4G_SH_FIX 0x00000002
+#define __EMPHPRE_AT_4G_FIX 0x00000003
+#define __SFP_TXRATE_EN_FIX 0x00000100
+#define __SFP_RXRATE_EN_FIX 0x00000080
+
+
+/*
+ * These register definitions are auto-generated from hard coded values
+ * in regparse.pl.
+ */
+
+
+/*
+ * These register mapping definitions are auto-generated from mapping tables
+ * in regparse.pl.
+ */
+#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
+#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
+#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
+#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
+#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
+
+#define CPE_DEPTH_Q(__n) \
+ (CPE_DEPTH_Q0 + (__n) * (CPE_DEPTH_Q1 - CPE_DEPTH_Q0))
+#define CPE_QCTRL_Q(__n) \
+ (CPE_QCTRL_Q0 + (__n) * (CPE_QCTRL_Q1 - CPE_QCTRL_Q0))
+#define CPE_PI_PTR_Q(__n) \
+ (CPE_PI_PTR_Q0 + (__n) * (CPE_PI_PTR_Q1 - CPE_PI_PTR_Q0))
+#define CPE_CI_PTR_Q(__n) \
+ (CPE_CI_PTR_Q0 + (__n) * (CPE_CI_PTR_Q1 - CPE_CI_PTR_Q0))
+#define RME_DEPTH_Q(__n) \
+ (RME_DEPTH_Q0 + (__n) * (RME_DEPTH_Q1 - RME_DEPTH_Q0))
+#define RME_QCTRL_Q(__n) \
+ (RME_QCTRL_Q0 + (__n) * (RME_QCTRL_Q1 - RME_QCTRL_Q0))
+#define RME_PI_PTR_Q(__n) \
+ (RME_PI_PTR_Q0 + (__n) * (RME_PI_PTR_Q1 - RME_PI_PTR_Q0))
+#define RME_CI_PTR_Q(__n) \
+ (RME_CI_PTR_Q0 + (__n) * (RME_CI_PTR_Q1 - RME_CI_PTR_Q0))
+#define HQM_QSET_RXQ_DRBL_P0(__n) \
+ (HQM_QSET0_RXQ_DRBL_P0 + (__n) * (HQM_QSET1_RXQ_DRBL_P0 - \
+ HQM_QSET0_RXQ_DRBL_P0))
+#define HQM_QSET_TXQ_DRBL_P0(__n) \
+ (HQM_QSET0_TXQ_DRBL_P0 + (__n) * (HQM_QSET1_TXQ_DRBL_P0 - \
+ HQM_QSET0_TXQ_DRBL_P0))
+#define HQM_QSET_IB_DRBL_1_P0(__n) \
+ (HQM_QSET0_IB_DRBL_1_P0 + (__n) * (HQM_QSET1_IB_DRBL_1_P0 - \
+ HQM_QSET0_IB_DRBL_1_P0))
+#define HQM_QSET_IB_DRBL_2_P0(__n) \
+ (HQM_QSET0_IB_DRBL_2_P0 + (__n) * (HQM_QSET1_IB_DRBL_2_P0 - \
+ HQM_QSET0_IB_DRBL_2_P0))
+#define HQM_QSET_RXQ_DRBL_P1(__n) \
+ (HQM_QSET0_RXQ_DRBL_P1 + (__n) * (HQM_QSET1_RXQ_DRBL_P1 - \
+ HQM_QSET0_RXQ_DRBL_P1))
+#define HQM_QSET_TXQ_DRBL_P1(__n) \
+ (HQM_QSET0_TXQ_DRBL_P1 + (__n) * (HQM_QSET1_TXQ_DRBL_P1 - \
+ HQM_QSET0_TXQ_DRBL_P1))
+#define HQM_QSET_IB_DRBL_1_P1(__n) \
+ (HQM_QSET0_IB_DRBL_1_P1 + (__n) * (HQM_QSET1_IB_DRBL_1_P1 - \
+ HQM_QSET0_IB_DRBL_1_P1))
+#define HQM_QSET_IB_DRBL_2_P1(__n) \
+ (HQM_QSET0_IB_DRBL_2_P1 + (__n) * (HQM_QSET1_IB_DRBL_2_P1 - \
+ HQM_QSET0_IB_DRBL_2_P1))
+
+#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
+#define CPE_Q_MASK(__q) ((__q) & 0x3)
+#define RME_Q_MASK(__q) ((__q) & 0x3)
+
+
+/*
+ * PCI MSI-X vector defines
+ */
+enum {
+ BFA_MSIX_CPE_Q0 = 0,
+ BFA_MSIX_CPE_Q1 = 1,
+ BFA_MSIX_CPE_Q2 = 2,
+ BFA_MSIX_CPE_Q3 = 3,
+ BFA_MSIX_RME_Q0 = 4,
+ BFA_MSIX_RME_Q1 = 5,
+ BFA_MSIX_RME_Q2 = 6,
+ BFA_MSIX_RME_Q3 = 7,
+ BFA_MSIX_LPU_ERR = 8,
+ BFA_MSIX_CT_MAX = 9,
+};
+
+/*
+ * And corresponding host interrupt status bit field defines
+ */
+#define __HFN_INT_CPE_Q0 0x00000001U
+#define __HFN_INT_CPE_Q1 0x00000002U
+#define __HFN_INT_CPE_Q2 0x00000004U
+#define __HFN_INT_CPE_Q3 0x00000008U
+#define __HFN_INT_CPE_Q4 0x00000010U
+#define __HFN_INT_CPE_Q5 0x00000020U
+#define __HFN_INT_CPE_Q6 0x00000040U
+#define __HFN_INT_CPE_Q7 0x00000080U
+#define __HFN_INT_RME_Q0 0x00000100U
+#define __HFN_INT_RME_Q1 0x00000200U
+#define __HFN_INT_RME_Q2 0x00000400U
+#define __HFN_INT_RME_Q3 0x00000800U
+#define __HFN_INT_RME_Q4 0x00001000U
+#define __HFN_INT_RME_Q5 0x00002000U
+#define __HFN_INT_RME_Q6 0x00004000U
+#define __HFN_INT_RME_Q7 0x00008000U
+#define __HFN_INT_ERR_EMC 0x00010000U
+#define __HFN_INT_ERR_LPU0 0x00020000U
+#define __HFN_INT_ERR_LPU1 0x00040000U
+#define __HFN_INT_ERR_PSS 0x00080000U
+#define __HFN_INT_MBOX_LPU0 0x00100000U
+#define __HFN_INT_MBOX_LPU1 0x00200000U
+#define __HFN_INT_MBOX1_LPU0 0x00400000U
+#define __HFN_INT_MBOX1_LPU1 0x00800000U
+#define __HFN_INT_CPE_MASK 0x000000ffU
+#define __HFN_INT_RME_MASK 0x0000ff00U
+
+
+/*
+ * catapult memory map.
+ */
+#define LL_PGN_HQM0 0x0096
+#define LL_PGN_HQM1 0x0097
+#define PSS_SMEM_PAGE_START 0x8000
+#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
+#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
+
+/*
+ * End of catapult memory map
+ */
+
+
+#endif /* __BFI_CTREG_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FABRIC_H__
+#define __BFI_FABRIC_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_fabric_h2i_msgs {
+ BFI_FABRIC_H2I_CREATE_REQ = 1,
+ BFI_FABRIC_H2I_DELETE_REQ = 2,
+ BFI_FABRIC_H2I_SETAUTH = 3,
+};
+
+enum bfi_fabric_i2h_msgs {
+ BFI_FABRIC_I2H_CREATE_RSP = BFA_I2HM(1),
+ BFI_FABRIC_I2H_DELETE_RSP = BFA_I2HM(2),
+ BFI_FABRIC_I2H_SETAUTH_RSP = BFA_I2HM(3),
+ BFI_FABRIC_I2H_ONLINE = BFA_I2HM(4),
+ BFI_FABRIC_I2H_OFFLINE = BFA_I2HM(5),
+};
+
+struct bfi_fabric_create_req_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u8 vf_en; /* virtual fabric enable */
+ u8 rsvd;
+ u16 vf_id; /* virtual fabric ID */
+ wwn_t pwwn; /* port name */
+ wwn_t nwwn; /* node name */
+};
+
+struct bfi_fabric_create_rsp_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u16 bfa_handle; /* host fabric handle */
+ u8 status; /* fabric create status */
+ u8 rsvd;
+};
+
+struct bfi_fabric_delete_req_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u16 fw_handle; /* firmware fabric handle */
+ u16 rsvd;
+};
+
+struct bfi_fabric_delete_rsp_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u16 bfa_handle; /* host fabric handle */
+ u8 status; /* fabric deletion status */
+ u8 rsvd;
+};
+
+#define BFI_FABRIC_AUTHSECRET_LEN 64
+struct bfi_fabric_setauth_req_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u16 fw_handle; /* f/w handle of fabric */
+ u8 algorithm;
+ u8 group;
+ u8 secret[BFI_FABRIC_AUTHSECRET_LEN];
+};
+
+union bfi_fabric_h2i_msg_u {
+ bfi_msg_t *msg;
+ struct bfi_fabric_create_req_s *create_req;
+ struct bfi_fabric_delete_req_s *delete_req;
+};
+
+union bfi_fabric_i2h_msg_u {
+ bfi_msg_t *msg;
+ struct bfi_fabric_create_rsp_s *create_rsp;
+ struct bfi_fabric_delete_rsp_s *delete_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_FABRIC_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FCPIM_H__
+#define __BFI_FCPIM_H__
+
+#include "bfi.h"
+#include <protocol/fcp.h>
+
+#pragma pack(1)
+
+/*
+ * Initiator mode I-T nexus interface defines.
+ */
+
+enum bfi_itnim_h2i {
+ BFI_ITNIM_H2I_CREATE_REQ = 1, /* i-t nexus creation */
+ BFI_ITNIM_H2I_DELETE_REQ = 2, /* i-t nexus deletion */
+};
+
+enum bfi_itnim_i2h {
+ BFI_ITNIM_I2H_CREATE_RSP = BFA_I2HM(1),
+ BFI_ITNIM_I2H_DELETE_RSP = BFA_I2HM(2),
+ BFI_ITNIM_I2H_SLER_EVENT = BFA_I2HM(3),
+};
+
+struct bfi_itnim_create_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fw_handle; /* f/w handle for itnim */
+ u8 class; /* FC class for IO */
+ u8 seq_rec; /* sequence recovery support */
+ u8 msg_no; /* seq id of the msg */
+};
+
+struct bfi_itnim_create_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 bfa_handle; /* bfa handle for itnim */
+ u8 status; /* fcp request status */
+ u8 seq_id; /* seq id of the msg */
+};
+
+struct bfi_itnim_delete_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fw_handle; /* f/w itnim handle */
+ u8 seq_id; /* seq id of the msg */
+ u8 rsvd;
+};
+
+struct bfi_itnim_delete_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 bfa_handle; /* bfa handle for itnim */
+ u8 status; /* fcp request status */
+ u8 seq_id; /* seq id of the msg */
+};
+
+struct bfi_itnim_sler_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 bfa_handle; /* bfa handle for itnim */
+ u16 rsvd;
+};
+
+union bfi_itnim_h2i_msg_u {
+ struct bfi_itnim_create_req_s *create_req;
+ struct bfi_itnim_delete_req_s *delete_req;
+ struct bfi_msg_s *msg;
+};
+
+union bfi_itnim_i2h_msg_u {
+ struct bfi_itnim_create_rsp_s *create_rsp;
+ struct bfi_itnim_delete_rsp_s *delete_rsp;
+ struct bfi_itnim_sler_event_s *sler_event;
+ struct bfi_msg_s *msg;
+};
+
+/*
+ * Initiator mode IO interface defines.
+ */
+
+enum bfi_ioim_h2i {
+ BFI_IOIM_H2I_IOABORT_REQ = 1, /* IO abort request */
+ BFI_IOIM_H2I_IOCLEANUP_REQ = 2, /* IO cleanup request */
+};
+
+enum bfi_ioim_i2h {
+ BFI_IOIM_I2H_IO_RSP = BFA_I2HM(1), /* non-fp IO response */
+ BFI_IOIM_I2H_IOABORT_RSP = BFA_I2HM(2),/* ABORT rsp */
+};
+
+/**
+ * IO command DIF info
+ */
+struct bfi_ioim_dif_s {
+ u32 dif_info[4];
+};
+
+/**
+ * FCP IO messages overview
+ *
+ * @note
+ * - Max CDB length supported is 64 bytes.
+ * - SCSI Linked commands and SCSI bi-directional Commands not
+ * supported.
+ *
+ */
+struct bfi_ioim_req_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 io_tag; /* I/O tag */
+ u16 rport_hdl; /* itnim/rport firmware handle */
+ struct fcp_cmnd_s cmnd; /* IO request info */
+
+ /**
+ * SG elements array within the IO request must be double word
+ * aligned. This aligment is required to optimize SGM setup for the IO.
+ */
+ struct bfi_sge_s sges[BFI_SGE_INLINE_MAX];
+ u8 io_timeout;
+ u8 dif_en;
+ u8 rsvd_a[2];
+ struct bfi_ioim_dif_s dif;
+};
+
+/**
+ * This table shows various IO status codes from firmware and their
+ * meaning. Host driver can use these status codes to further process
+ * IO completions.
+ *
+ * BFI_IOIM_STS_OK : IO completed with error free SCSI &
+ * transport status.
+ * - io-tag can be reused.
+ *
+ * BFA_IOIM_STS_SCSI_ERR : IO completed with scsi error.
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_HOST_ABORTED : IO was aborted successfully due to
+ * host request.
+ * - io-tag cannot be reused yet.
+ *
+ * BFI_IOIM_STS_ABORTED : IO was aborted successfully
+ * internally by f/w.
+ * - io-tag cannot be reused yet.
+ *
+ * BFI_IOIM_STS_TIMEDOUT : IO timedout and ABTS/RRQ is happening
+ * in the firmware and
+ * - io-tag cannot be reused yet.
+ *
+ * BFI_IOIM_STS_SQER_NEEDED : Firmware could not recover the IO
+ * with sequence level error
+ * logic and hence host needs to retry
+ * this IO with a different IO tag
+ * - io-tag cannot be used yet.
+ *
+ * BFI_IOIM_STS_NEXUS_ABORT : Second Level Error Recovery from host
+ * is required because 2 consecutive ABTS
+ * timedout and host needs logout and
+ * re-login with the target
+ * - io-tag cannot be used yet.
+ *
+ * BFI_IOIM_STS_UNDERRUN : IO completed with SCSI status good,
+ * but the data tranferred is less than
+ * the fcp data length in the command.
+ * ex. SCSI INQUIRY where transferred
+ * data length and residue count in FCP
+ * response accounts for total fcp-dl
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_OVERRUN : IO completed with SCSI status good,
+ * but the data transerred is more than
+ * fcp data length in the command. ex.
+ * TAPE IOs where blocks can of unequal
+ * lengths.
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_RES_FREE : Firmware has completed using io-tag
+ * during abort process
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_PROTO_ERR : Firmware detected a protocol error.
+ * ex target sent more data than
+ * requested, or there was data frame
+ * loss and other reasons
+ * - io-tag cannot be used yet.
+ *
+ * BFI_IOIM_STS_DIF_ERR : Firwmare detected DIF error. ex: DIF
+ * CRC err or Ref Tag err or App tag err.
+ * - io-tag can be reused.
+ *
+ * BFA_IOIM_STS_TSK_MGT_ABORT : IO was aborted because of Task
+ * Management command from the host
+ * - io-tag can be reused.
+ *
+ * BFI_IOIM_STS_UTAG : Firmware does not know about this
+ * io_tag.
+ * - io-tag can be reused.
+ */
+enum bfi_ioim_status {
+ BFI_IOIM_STS_OK = 0,
+ BFI_IOIM_STS_HOST_ABORTED = 1,
+ BFI_IOIM_STS_ABORTED = 2,
+ BFI_IOIM_STS_TIMEDOUT = 3,
+ BFI_IOIM_STS_RES_FREE = 4,
+ BFI_IOIM_STS_SQER_NEEDED = 5,
+ BFI_IOIM_STS_PROTO_ERR = 6,
+ BFI_IOIM_STS_UTAG = 7,
+ BFI_IOIM_STS_PATHTOV = 8,
+};
+
+#define BFI_IOIM_SNSLEN (256)
+/**
+ * I/O response message
+ */
+struct bfi_ioim_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 io_tag; /* completed IO tag */
+ u16 bfa_rport_hndl; /* releated rport handle */
+ u8 io_status; /* IO completion status */
+ u8 reuse_io_tag; /* IO tag can be reused */
+ u16 abort_tag; /* host abort request tag */
+ u8 scsi_status; /* scsi status from target */
+ u8 sns_len; /* scsi sense length */
+ u8 resid_flags; /* IO residue flags */
+ u8 rsvd_a;
+ u32 residue; /* IO residual length in bytes */
+ u32 rsvd_b[3];
+};
+
+struct bfi_ioim_abort_req_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 io_tag; /* I/O tag */
+ u16 abort_tag; /* unique request tag */
+};
+
+/*
+ * Initiator mode task management command interface defines.
+ */
+
+enum bfi_tskim_h2i {
+ BFI_TSKIM_H2I_TM_REQ = 1, /* task-mgmt command */
+ BFI_TSKIM_H2I_ABORT_REQ = 2, /* task-mgmt command */
+};
+
+enum bfi_tskim_i2h {
+ BFI_TSKIM_I2H_TM_RSP = BFA_I2HM(1),
+};
+
+struct bfi_tskim_req_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 tsk_tag; /* task management tag */
+ u16 itn_fhdl; /* itn firmware handle */
+ lun_t lun; /* LU number */
+ u8 tm_flags; /* see fcp_tm_cmnd_t */
+ u8 t_secs; /* Timeout value in seconds */
+ u8 rsvd[2];
+};
+
+struct bfi_tskim_abortreq_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 tsk_tag; /* task management tag */
+ u16 rsvd;
+};
+
+enum bfi_tskim_status {
+ /*
+ * Following are FCP-4 spec defined status codes,
+ * **DO NOT CHANGE THEM **
+ */
+ BFI_TSKIM_STS_OK = 0,
+ BFI_TSKIM_STS_NOT_SUPP = 4,
+ BFI_TSKIM_STS_FAILED = 5,
+
+ /**
+ * Defined by BFA
+ */
+ BFI_TSKIM_STS_TIMEOUT = 10, /* TM request timedout */
+ BFI_TSKIM_STS_ABORTED = 11, /* Aborted on host request */
+};
+
+struct bfi_tskim_rsp_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 tsk_tag; /* task mgmt cmnd tag */
+ u8 tsk_status; /* @ref bfi_tskim_status */
+ u8 rsvd;
+};
+
+#pragma pack()
+
+#endif /* __BFI_FCPIM_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_FCXP_H__
+#define __BFI_FCXP_H__
+
+#include "bfi.h"
+
+#pragma pack(1)
+
+enum bfi_fcxp_h2i {
+ BFI_FCXP_H2I_SEND_REQ = 1,
+};
+
+enum bfi_fcxp_i2h {
+ BFI_FCXP_I2H_SEND_RSP = BFA_I2HM(1),
+};
+
+#define BFA_FCXP_MAX_SGES 2
+
+/**
+ * FCXP send request structure
+ */
+struct bfi_fcxp_send_req_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 fcxp_tag; /* driver request tag */
+ u16 max_frmsz; /* max send frame size */
+ u16 vf_id; /* vsan tag if applicable */
+ u16 rport_fw_hndl; /* FW Handle for the remote port */
+ u8 class; /* FC class used for req/rsp */
+ u8 rsp_timeout; /* timeout in secs, 0-no response */
+ u8 cts; /* continue sequence */
+ u8 lp_tag; /* lport tag */
+ struct fchs_s fchs; /* request FC header structure */
+ u32 req_len; /* request payload length */
+ u32 rsp_maxlen; /* max response length expected */
+ struct bfi_sge_s req_sge[BFA_FCXP_MAX_SGES]; /* request buf */
+ struct bfi_sge_s rsp_sge[BFA_FCXP_MAX_SGES]; /* response buf */
+};
+
+/**
+ * FCXP send response structure
+ */
+struct bfi_fcxp_send_rsp_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 fcxp_tag; /* send request tag */
+ u8 req_status; /* request status */
+ u8 rsvd;
+ u32 rsp_len; /* actual response length */
+ u32 residue_len; /* residual response length */
+ struct fchs_s fchs; /* response FC header structure */
+};
+
+#pragma pack()
+
+#endif /* __BFI_FCXP_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_IOC_H__
+#define __BFI_IOC_H__
+
+#include "bfi.h"
+#include <defs/bfa_defs_ioc.h>
+
+#pragma pack(1)
+
+enum bfi_ioc_h2i_msgs {
+ BFI_IOC_H2I_ENABLE_REQ = 1,
+ BFI_IOC_H2I_DISABLE_REQ = 2,
+ BFI_IOC_H2I_GETATTR_REQ = 3,
+ BFI_IOC_H2I_DBG_SYNC = 4,
+ BFI_IOC_H2I_DBG_DUMP = 5,
+};
+
+enum bfi_ioc_i2h_msgs {
+ BFI_IOC_I2H_ENABLE_REPLY = BFA_I2HM(1),
+ BFI_IOC_I2H_DISABLE_REPLY = BFA_I2HM(2),
+ BFI_IOC_I2H_GETATTR_REPLY = BFA_I2HM(3),
+ BFI_IOC_I2H_READY_EVENT = BFA_I2HM(4),
+ BFI_IOC_I2H_HBEAT = BFA_I2HM(5),
+};
+
+/**
+ * BFI_IOC_H2I_GETATTR_REQ message
+ */
+struct bfi_ioc_getattr_req_s {
+ struct bfi_mhdr_s mh;
+ union bfi_addr_u attr_addr;
+};
+
+struct bfi_ioc_attr_s {
+ wwn_t mfg_wwn;
+ mac_t mfg_mac;
+ u16 rsvd_a;
+ char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)];
+ u8 pcie_gen;
+ u8 pcie_lanes_orig;
+ u8 pcie_lanes;
+ u8 rx_bbcredit; /* receive buffer credits */
+ u32 adapter_prop; /* adapter properties */
+ u16 maxfrsize; /* max receive frame size */
+ char asic_rev;
+ u8 rsvd_b;
+ char fw_version[BFA_VERSION_LEN];
+ char optrom_version[BFA_VERSION_LEN];
+ struct bfa_mfg_vpd_s vpd;
+};
+
+/**
+ * BFI_IOC_I2H_GETATTR_REPLY message
+ */
+struct bfi_ioc_getattr_reply_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u8 status; /* cfg reply status */
+ u8 rsvd[3];
+};
+
+/**
+ * Firmware memory page offsets
+ */
+#define BFI_IOC_SMEM_PG0_CB (0x40)
+#define BFI_IOC_SMEM_PG0_CT (0x180)
+
+/**
+ * Firmware trace offset
+ */
+#define BFI_IOC_TRC_OFF (0x4b00)
+#define BFI_IOC_TRC_ENTS 256
+
+#define BFI_IOC_FW_SIGNATURE (0xbfadbfad)
+#define BFI_IOC_MD5SUM_SZ 4
+struct bfi_ioc_image_hdr_s {
+ u32 signature; /* constant signature */
+ u32 rsvd_a;
+ u32 exec; /* exec vector */
+ u32 param; /* parameters */
+ u32 rsvd_b[4];
+ u32 md5sum[BFI_IOC_MD5SUM_SZ];
+};
+
+/**
+ * BFI_IOC_I2H_READY_EVENT message
+ */
+struct bfi_ioc_rdy_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 init_status; /* init event status */
+ u8 rsvd[3];
+};
+
+struct bfi_ioc_hbeat_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u32 hb_count; /* current heart beat count */
+};
+
+/**
+ * IOC hardware/firmware state
+ */
+enum bfi_ioc_state {
+ BFI_IOC_UNINIT = 0, /* not initialized */
+ BFI_IOC_INITING = 1, /* h/w is being initialized */
+ BFI_IOC_HWINIT = 2, /* h/w is initialized */
+ BFI_IOC_CFG = 3, /* IOC configuration in progress */
+ BFI_IOC_OP = 4, /* IOC is operational */
+ BFI_IOC_DISABLING = 5, /* IOC is being disabled */
+ BFI_IOC_DISABLED = 6, /* IOC is disabled */
+ BFI_IOC_CFG_DISABLED = 7, /* IOC is being disabled;transient */
+ BFI_IOC_HBFAIL = 8, /* IOC heart-beat failure */
+ BFI_IOC_MEMTEST = 9, /* IOC is doing memtest */
+};
+
+#define BFI_IOC_ENDIAN_SIG 0x12345678
+
+enum {
+ BFI_ADAPTER_TYPE_FC = 0x01, /* FC adapters */
+ BFI_ADAPTER_TYPE_MK = 0x0f0000, /* adapter type mask */
+ BFI_ADAPTER_TYPE_SH = 16, /* adapter type shift */
+ BFI_ADAPTER_NPORTS_MK = 0xff00, /* number of ports mask */
+ BFI_ADAPTER_NPORTS_SH = 8, /* number of ports shift */
+ BFI_ADAPTER_SPEED_MK = 0xff, /* adapter speed mask */
+ BFI_ADAPTER_SPEED_SH = 0, /* adapter speed shift */
+ BFI_ADAPTER_PROTO = 0x100000, /* prototype adapaters */
+ BFI_ADAPTER_TTV = 0x200000, /* TTV debug capable */
+ BFI_ADAPTER_UNSUPP = 0x400000, /* unknown adapter type */
+};
+
+#define BFI_ADAPTER_GETP(__prop,__adap_prop) \
+ (((__adap_prop) & BFI_ADAPTER_ ## __prop ## _MK) >> \
+ BFI_ADAPTER_ ## __prop ## _SH)
+#define BFI_ADAPTER_SETP(__prop, __val) \
+ ((__val) << BFI_ADAPTER_ ## __prop ## _SH)
+#define BFI_ADAPTER_IS_PROTO(__adap_type) \
+ ((__adap_type) & BFI_ADAPTER_PROTO)
+#define BFI_ADAPTER_IS_TTV(__adap_type) \
+ ((__adap_type) & BFI_ADAPTER_TTV)
+#define BFI_ADAPTER_IS_UNSUPP(__adap_type) \
+ ((__adap_type) & BFI_ADAPTER_UNSUPP)
+#define BFI_ADAPTER_IS_SPECIAL(__adap_type) \
+ ((__adap_type) & (BFI_ADAPTER_TTV | BFI_ADAPTER_PROTO | \
+ BFI_ADAPTER_UNSUPP))
+
+/**
+ * BFI_IOC_H2I_ENABLE_REQ & BFI_IOC_H2I_DISABLE_REQ messages
+ */
+struct bfi_ioc_ctrl_req_s {
+ struct bfi_mhdr_s mh;
+ u8 ioc_class;
+ u8 rsvd[3];
+};
+
+/**
+ * BFI_IOC_I2H_ENABLE_REPLY & BFI_IOC_I2H_DISABLE_REPLY messages
+ */
+struct bfi_ioc_ctrl_reply_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u8 status; /* enable/disable status */
+ u8 rsvd[3];
+};
+
+#define BFI_IOC_MSGSZ 8
+/**
+ * H2I Messages
+ */
+union bfi_ioc_h2i_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_ioc_ctrl_req_s enable_req;
+ struct bfi_ioc_ctrl_req_s disable_req;
+ struct bfi_ioc_getattr_req_s getattr_req;
+ u32 mboxmsg[BFI_IOC_MSGSZ];
+};
+
+/**
+ * I2H Messages
+ */
+union bfi_ioc_i2h_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_ioc_rdy_event_s rdy_event;
+ u32 mboxmsg[BFI_IOC_MSGSZ];
+};
+
+#pragma pack()
+
+#endif /* __BFI_IOC_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_IOCFC_H__
+#define __BFI_IOCFC_H__
+
+#include "bfi.h"
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_iocfc.h>
+#include <defs/bfa_defs_boot.h>
+
+#pragma pack(1)
+
+enum bfi_iocfc_h2i_msgs {
+ BFI_IOCFC_H2I_CFG_REQ = 1,
+ BFI_IOCFC_H2I_GET_STATS_REQ = 2,
+ BFI_IOCFC_H2I_CLEAR_STATS_REQ = 3,
+ BFI_IOCFC_H2I_SET_INTR_REQ = 4,
+ BFI_IOCFC_H2I_UPDATEQ_REQ = 5,
+};
+
+enum bfi_iocfc_i2h_msgs {
+ BFI_IOCFC_I2H_CFG_REPLY = BFA_I2HM(1),
+ BFI_IOCFC_I2H_GET_STATS_RSP = BFA_I2HM(2),
+ BFI_IOCFC_I2H_CLEAR_STATS_RSP = BFA_I2HM(3),
+ BFI_IOCFC_I2H_UPDATEQ_RSP = BFA_I2HM(5),
+};
+
+struct bfi_iocfc_cfg_s {
+ u8 num_cqs; /* Number of CQs to be used */
+ u8 sense_buf_len; /* SCSI sense length */
+ u8 trunk_enabled; /* port trunking enabled */
+ u8 trunk_ports; /* trunk ports bit map */
+ u32 endian_sig; /* endian signature of host */
+
+ /**
+ * Request and response circular queue base addresses, size and
+ * shadow index pointers.
+ */
+ union bfi_addr_u req_cq_ba[BFI_IOC_MAX_CQS];
+ union bfi_addr_u req_shadow_ci[BFI_IOC_MAX_CQS];
+ u16 req_cq_elems[BFI_IOC_MAX_CQS];
+ union bfi_addr_u rsp_cq_ba[BFI_IOC_MAX_CQS];
+ union bfi_addr_u rsp_shadow_pi[BFI_IOC_MAX_CQS];
+ u16 rsp_cq_elems[BFI_IOC_MAX_CQS];
+
+ union bfi_addr_u stats_addr; /* DMA-able address for stats */
+ union bfi_addr_u cfgrsp_addr; /* config response dma address */
+ union bfi_addr_u ioim_snsbase; /* IO sense buffer base address */
+ struct bfa_iocfc_intr_attr_s intr_attr; /* IOC interrupt attributes */
+};
+
+/**
+ * Boot target wwn information for this port. This contains either the stored
+ * or discovered boot target port wwns for the port.
+ */
+struct bfi_iocfc_bootwwns {
+ wwn_t wwn[BFA_BOOT_BOOTLUN_MAX];
+ u8 nwwns;
+ u8 rsvd[7];
+};
+
+struct bfi_iocfc_cfgrsp_s {
+ struct bfa_iocfc_fwcfg_s fwcfg;
+ struct bfa_iocfc_intr_attr_s intr_attr;
+ struct bfi_iocfc_bootwwns bootwwns;
+};
+
+/**
+ * BFI_IOCFC_H2I_CFG_REQ message
+ */
+struct bfi_iocfc_cfg_req_s {
+ struct bfi_mhdr_s mh;
+ union bfi_addr_u ioc_cfg_dma_addr;
+};
+
+/**
+ * BFI_IOCFC_I2H_CFG_REPLY message
+ */
+struct bfi_iocfc_cfg_reply_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u8 cfg_success; /* cfg reply status */
+ u8 lpu_bm; /* LPUs assigned for this IOC */
+ u8 rsvd[2];
+};
+
+/**
+ * BFI_IOCFC_H2I_GET_STATS_REQ & BFI_IOCFC_H2I_CLEAR_STATS_REQ messages
+ */
+struct bfi_iocfc_stats_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * BFI_IOCFC_I2H_GET_STATS_RSP & BFI_IOCFC_I2H_CLEAR_STATS_RSP messages
+ */
+struct bfi_iocfc_stats_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 status; /* reply status */
+ u8 rsvd[3];
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * BFI_IOCFC_H2I_SET_INTR_REQ message
+ */
+struct bfi_iocfc_set_intr_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 coalesce; /* enable intr coalescing*/
+ u8 rsvd[3];
+ u16 delay; /* delay timer 0..1125us */
+ u16 latency; /* latency timer 0..225us */
+};
+
+/**
+ * BFI_IOCFC_H2I_UPDATEQ_REQ message
+ */
+struct bfi_iocfc_updateq_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u32 reqq_ba; /* reqq base addr */
+ u32 rspq_ba; /* rspq base addr */
+ u32 reqq_sci; /* reqq shadow ci */
+ u32 rspq_spi; /* rspq shadow pi */
+};
+
+/**
+ * BFI_IOCFC_I2H_UPDATEQ_RSP message
+ */
+struct bfi_iocfc_updateq_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 status; /* updateq status */
+ u8 rsvd[3];
+};
+
+/**
+ * H2I Messages
+ */
+union bfi_iocfc_h2i_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_iocfc_cfg_req_s cfg_req;
+ struct bfi_iocfc_stats_req_s stats_get;
+ struct bfi_iocfc_stats_req_s stats_clr;
+ struct bfi_iocfc_updateq_req_s updateq_req;
+ u32 mboxmsg[BFI_IOC_MSGSZ];
+};
+
+/**
+ * I2H Messages
+ */
+union bfi_iocfc_i2h_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_iocfc_cfg_reply_s cfg_reply;
+ struct bfi_iocfc_stats_rsp_s stats_get_rsp;
+ struct bfi_iocfc_stats_rsp_s stats_clr_rsp;
+ struct bfi_iocfc_updateq_rsp_s updateq_rsp;
+ u32 mboxmsg[BFI_IOC_MSGSZ];
+};
+
+#pragma pack()
+
+#endif /* __BFI_IOCFC_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_LPORT_H__
+#define __BFI_LPORT_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_lport_h2i_msgs {
+ BFI_LPORT_H2I_CREATE_REQ = 1,
+ BFI_LPORT_H2I_DELETE_REQ = 2,
+};
+
+enum bfi_lport_i2h_msgs {
+ BFI_LPORT_I2H_CREATE_RSP = BFA_I2HM(1),
+ BFI_LPORT_I2H_DELETE_RSP = BFA_I2HM(2),
+ BFI_LPORT_I2H_ONLINE = BFA_I2HM(3),
+ BFI_LPORT_I2H_OFFLINE = BFA_I2HM(4),
+};
+
+#define BFI_LPORT_MAX_SYNNAME 64
+
+enum bfi_lport_role_e {
+ BFI_LPORT_ROLE_FCPIM = 1,
+ BFI_LPORT_ROLE_FCPTM = 2,
+ BFI_LPORT_ROLE_IPFC = 4,
+};
+
+struct bfi_lport_create_req_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u16 fabric_fwhdl; /* parent fabric instance */
+ u8 roles; /* lport FC-4 roles */
+ u8 rsvd;
+ wwn_t pwwn; /* port name */
+ wwn_t nwwn; /* node name */
+ u8 symname[BFI_LPORT_MAX_SYNNAME];
+};
+
+struct bfi_lport_create_rsp_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u8 status; /* lport creation status */
+ u8 rsvd[3];
+};
+
+struct bfi_lport_delete_req_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u16 fw_handle; /* firmware lport handle */
+ u16 rsvd;
+};
+
+struct bfi_lport_delete_rsp_s {
+ bfi_mhdr_t mh; /* common msg header */
+ u16 bfa_handle; /* host lport handle */
+ u8 status; /* lport deletion status */
+ u8 rsvd;
+};
+
+union bfi_lport_h2i_msg_u {
+ bfi_msg_t *msg;
+ struct bfi_lport_create_req_s *create_req;
+ struct bfi_lport_delete_req_s *delete_req;
+};
+
+union bfi_lport_i2h_msg_u {
+ bfi_msg_t *msg;
+ struct bfi_lport_create_rsp_s *create_rsp;
+ struct bfi_lport_delete_rsp_s *delete_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_LPORT_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_LPS_H__
+#define __BFI_LPS_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_lps_h2i_msgs {
+ BFI_LPS_H2I_LOGIN_REQ = 1,
+ BFI_LPS_H2I_LOGOUT_REQ = 2,
+};
+
+enum bfi_lps_i2h_msgs {
+ BFI_LPS_H2I_LOGIN_RSP = BFA_I2HM(1),
+ BFI_LPS_H2I_LOGOUT_RSP = BFA_I2HM(2),
+};
+
+struct bfi_lps_login_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 lp_tag;
+ u8 alpa;
+ u16 pdu_size;
+ wwn_t pwwn;
+ wwn_t nwwn;
+ u8 fdisc;
+ u8 auth_en;
+ u8 rsvd[2];
+};
+
+struct bfi_lps_login_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 lp_tag;
+ u8 status;
+ u8 lsrjt_rsn;
+ u8 lsrjt_expl;
+ wwn_t port_name;
+ wwn_t node_name;
+ u16 bb_credit;
+ u8 f_port;
+ u8 npiv_en;
+ u32 lp_pid : 24;
+ u32 auth_req : 8;
+ mac_t lp_mac;
+ mac_t fcf_mac;
+ u8 ext_status;
+ u8 brcd_switch;/* attached peer is brcd switch */
+};
+
+struct bfi_lps_logout_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 lp_tag;
+ u8 rsvd[3];
+ wwn_t port_name;
+};
+
+struct bfi_lps_logout_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 lp_tag;
+ u8 status;
+ u8 rsvd[2];
+};
+
+union bfi_lps_h2i_msg_u {
+ struct bfi_mhdr_s *msg;
+ struct bfi_lps_login_req_s *login_req;
+ struct bfi_lps_logout_req_s *logout_req;
+};
+
+union bfi_lps_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_lps_login_rsp_s *login_rsp;
+ struct bfi_lps_logout_rsp_s *logout_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_LPS_H__ */
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFI_PORT_H__
+#define __BFI_PORT_H__
+
+#include <bfi/bfi.h>
+#include <defs/bfa_defs_pport.h>
+
+#pragma pack(1)
+
+enum bfi_port_h2i {
+ BFI_PORT_H2I_ENABLE_REQ = (1),
+ BFI_PORT_H2I_DISABLE_REQ = (2),
+ BFI_PORT_H2I_GET_STATS_REQ = (3),
+ BFI_PORT_H2I_CLEAR_STATS_REQ = (4),
+};
+
+enum bfi_port_i2h {
+ BFI_PORT_I2H_ENABLE_RSP = BFA_I2HM(1),
+ BFI_PORT_I2H_DISABLE_RSP = BFA_I2HM(2),
+ BFI_PORT_I2H_GET_STATS_RSP = BFA_I2HM(3),
+ BFI_PORT_I2H_CLEAR_STATS_RSP = BFA_I2HM(4),
+};
+
+/**
+ * Generic REQ type
+ */
+struct bfi_port_generic_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u32 msgtag; /* msgtag for reply */
+ u32 rsvd;
+};
+
+/**
+ * Generic RSP type
+ */
+struct bfi_port_generic_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 status; /* port enable status */
+ u8 rsvd[3];
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * @todo
+ * BFI_PORT_H2I_ENABLE_REQ
+ */
+
+/**
+ * @todo
+ * BFI_PORT_I2H_ENABLE_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_DISABLE_REQ
+ */
+
+/**
+ * BFI_PORT_I2H_DISABLE_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_GET_STATS_REQ
+ */
+struct bfi_port_get_stats_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ union bfi_addr_u dma_addr;
+};
+
+/**
+ * BFI_PORT_I2H_GET_STATS_RSP
+ */
+
+/**
+ * BFI_PORT_H2I_CLEAR_STATS_REQ
+ */
+
+/**
+ * BFI_PORT_I2H_CLEAR_STATS_RSP
+ */
+
+union bfi_port_h2i_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_port_generic_req_s enable_req;
+ struct bfi_port_generic_req_s disable_req;
+ struct bfi_port_get_stats_req_s getstats_req;
+ struct bfi_port_generic_req_s clearstats_req;
+};
+
+union bfi_port_i2h_msg_u {
+ struct bfi_mhdr_s mh;
+ struct bfi_port_generic_rsp_s enable_rsp;
+ struct bfi_port_generic_rsp_s disable_rsp;
+ struct bfi_port_generic_rsp_s getstats_rsp;
+ struct bfi_port_generic_rsp_s clearstats_rsp;
+};
+
+#pragma pack()
+
+#endif /* __BFI_PORT_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFI_PPORT_H__
+#define __BFI_PPORT_H__
+
+#include <bfi/bfi.h>
+#include <defs/bfa_defs_pport.h>
+
+#pragma pack(1)
+
+enum bfi_pport_h2i {
+ BFI_PPORT_H2I_ENABLE_REQ = (1),
+ BFI_PPORT_H2I_DISABLE_REQ = (2),
+ BFI_PPORT_H2I_GET_STATS_REQ = (3),
+ BFI_PPORT_H2I_CLEAR_STATS_REQ = (4),
+ BFI_PPORT_H2I_SET_SVC_PARAMS_REQ = (5),
+ BFI_PPORT_H2I_ENABLE_RX_VF_TAG_REQ = (6),
+ BFI_PPORT_H2I_ENABLE_TX_VF_TAG_REQ = (7),
+ BFI_PPORT_H2I_GET_QOS_STATS_REQ = (8),
+ BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ = (9),
+};
+
+enum bfi_pport_i2h {
+ BFI_PPORT_I2H_ENABLE_RSP = BFA_I2HM(1),
+ BFI_PPORT_I2H_DISABLE_RSP = BFA_I2HM(2),
+ BFI_PPORT_I2H_GET_STATS_RSP = BFA_I2HM(3),
+ BFI_PPORT_I2H_CLEAR_STATS_RSP = BFA_I2HM(4),
+ BFI_PPORT_I2H_SET_SVC_PARAMS_RSP = BFA_I2HM(5),
+ BFI_PPORT_I2H_ENABLE_RX_VF_TAG_RSP = BFA_I2HM(6),
+ BFI_PPORT_I2H_ENABLE_TX_VF_TAG_RSP = BFA_I2HM(7),
+ BFI_PPORT_I2H_EVENT = BFA_I2HM(8),
+ BFI_PPORT_I2H_GET_QOS_STATS_RSP = BFA_I2HM(9),
+ BFI_PPORT_I2H_CLEAR_QOS_STATS_RSP = BFA_I2HM(10),
+};
+
+/**
+ * Generic REQ type
+ */
+struct bfi_pport_generic_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * Generic RSP type
+ */
+struct bfi_pport_generic_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 status; /* port enable status */
+ u8 rsvd[3];
+ u32 msgtag; /* msgtag for reply */
+};
+
+/**
+ * BFI_PPORT_H2I_ENABLE_REQ
+ */
+struct bfi_pport_enable_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u32 rsvd1;
+ wwn_t nwwn; /* node wwn of physical port */
+ wwn_t pwwn; /* port wwn of physical port */
+ struct bfa_pport_cfg_s port_cfg; /* port configuration */
+ union bfi_addr_u stats_dma_addr; /* DMA address for stats */
+ u32 msgtag; /* msgtag for reply */
+ u32 rsvd2;
+};
+
+/**
+ * BFI_PPORT_I2H_ENABLE_RSP
+ */
+#define bfi_pport_enable_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_DISABLE_REQ
+ */
+#define bfi_pport_disable_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_DISABLE_RSP
+ */
+#define bfi_pport_disable_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_GET_STATS_REQ
+ */
+#define bfi_pport_get_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_GET_STATS_RSP
+ */
+#define bfi_pport_get_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_STATS_REQ
+ */
+#define bfi_pport_clear_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_I2H_CLEAR_STATS_RSP
+ */
+#define bfi_pport_clear_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_GET_QOS_STATS_REQ
+ */
+#define bfi_pport_get_qos_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_H2I_GET_QOS_STATS_RSP
+ */
+#define bfi_pport_get_qos_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_QOS_STATS_REQ
+ */
+#define bfi_pport_clear_qos_stats_req_t struct bfi_pport_generic_req_s
+
+/**
+ * BFI_PPORT_H2I_CLEAR_QOS_STATS_RSP
+ */
+#define bfi_pport_clear_qos_stats_rsp_t struct bfi_pport_generic_rsp_s
+
+/**
+ * BFI_PPORT_H2I_SET_SVC_PARAMS_REQ
+ */
+struct bfi_pport_set_svc_params_req_s {
+ struct bfi_mhdr_s mh; /* msg header */
+ u16 tx_bbcredit; /* Tx credits */
+ u16 rsvd;
+};
+
+/**
+ * BFI_PPORT_I2H_SET_SVC_PARAMS_RSP
+ */
+
+/**
+ * BFI_PPORT_I2H_EVENT
+ */
+struct bfi_pport_event_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ struct bfa_pport_link_s link_state;
+};
+
+union bfi_pport_h2i_msg_u {
+ struct bfi_mhdr_s *mhdr;
+ struct bfi_pport_enable_req_s *penable;
+ struct bfi_pport_generic_req_s *pdisable;
+ struct bfi_pport_generic_req_s *pgetstats;
+ struct bfi_pport_generic_req_s *pclearstats;
+ struct bfi_pport_set_svc_params_req_s *psetsvcparams;
+ struct bfi_pport_get_qos_stats_req_s *pgetqosstats;
+ struct bfi_pport_generic_req_s *pclearqosstats;
+};
+
+union bfi_pport_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_pport_generic_rsp_s *enable_rsp;
+ struct bfi_pport_disable_rsp_s *disable_rsp;
+ struct bfi_pport_generic_rsp_s *getstats_rsp;
+ struct bfi_pport_clear_stats_rsp_s *clearstats_rsp;
+ struct bfi_pport_set_svc_params_rsp_s *setsvcparasm_rsp;
+ struct bfi_pport_get_qos_stats_rsp_s *getqosstats_rsp;
+ struct bfi_pport_clear_qos_stats_rsp_s *clearqosstats_rsp;
+ struct bfi_pport_event_s *event;
+};
+
+#pragma pack()
+
+#endif /* __BFI_PPORT_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_RPORT_H__
+#define __BFI_RPORT_H__
+
+#include <bfi/bfi.h>
+
+#pragma pack(1)
+
+enum bfi_rport_h2i_msgs {
+ BFI_RPORT_H2I_CREATE_REQ = 1,
+ BFI_RPORT_H2I_DELETE_REQ = 2,
+ BFI_RPORT_H2I_SET_SPEED_REQ = 3,
+};
+
+enum bfi_rport_i2h_msgs {
+ BFI_RPORT_I2H_CREATE_RSP = BFA_I2HM(1),
+ BFI_RPORT_I2H_DELETE_RSP = BFA_I2HM(2),
+ BFI_RPORT_I2H_QOS_SCN = BFA_I2HM(3),
+};
+
+struct bfi_rport_create_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 bfa_handle; /* host rport handle */
+ u16 max_frmsz; /* max rcv pdu size */
+ u32 pid : 24, /* remote port ID */
+ lp_tag : 8; /* local port tag */
+ u32 local_pid : 24, /* local port ID */
+ cisc : 8;
+ u8 fc_class; /* supported FC classes */
+ u8 vf_en; /* virtual fabric enable */
+ u16 vf_id; /* virtual fabric ID */
+};
+
+struct bfi_rport_create_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u8 status; /* rport creation status */
+ u8 rsvd[3];
+ u16 bfa_handle; /* host rport handle */
+ u16 fw_handle; /* firmware rport handle */
+ struct bfa_rport_qos_attr_s qos_attr; /* QoS Attributes */
+};
+
+struct bfa_rport_speed_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fw_handle; /* firmware rport handle */
+ u8 speed; /*! rport's speed via RPSC */
+ u8 rsvd;
+};
+
+struct bfi_rport_delete_req_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 fw_handle; /* firmware rport handle */
+ u16 rsvd;
+};
+
+struct bfi_rport_delete_rsp_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 bfa_handle; /* host rport handle */
+ u8 status; /* rport deletion status */
+ u8 rsvd;
+};
+
+struct bfi_rport_qos_scn_s {
+ struct bfi_mhdr_s mh; /* common msg header */
+ u16 bfa_handle; /* host rport handle */
+ u16 rsvd;
+ struct bfa_rport_qos_attr_s old_qos_attr; /* Old QoS Attributes */
+ struct bfa_rport_qos_attr_s new_qos_attr; /* New QoS Attributes */
+};
+
+union bfi_rport_h2i_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_rport_create_req_s *create_req;
+ struct bfi_rport_delete_req_s *delete_req;
+ struct bfi_rport_speed_req_s *speed_req;
+};
+
+union bfi_rport_i2h_msg_u {
+ struct bfi_msg_s *msg;
+ struct bfi_rport_create_rsp_s *create_rsp;
+ struct bfi_rport_delete_rsp_s *delete_rsp;
+ struct bfi_rport_qos_scn_s *qos_scn_evt;
+};
+
+#pragma pack()
+
+#endif /* __BFI_RPORT_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFI_UF_H__
+#define __BFI_UF_H__
+
+#include "bfi.h"
+
+#pragma pack(1)
+
+enum bfi_uf_h2i {
+ BFI_UF_H2I_BUF_POST = 1,
+};
+
+enum bfi_uf_i2h {
+ BFI_UF_I2H_FRM_RCVD = BFA_I2HM(1),
+};
+
+#define BFA_UF_MAX_SGES 2
+
+struct bfi_uf_buf_post_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 buf_tag; /* buffer tag */
+ u16 buf_len; /* total buffer length */
+ struct bfi_sge_s sge[BFA_UF_MAX_SGES]; /* buffer DMA SGEs */
+};
+
+struct bfi_uf_frm_rcvd_s {
+ struct bfi_mhdr_s mh; /* Common msg header */
+ u16 buf_tag; /* buffer tag */
+ u16 rsvd;
+ u16 frm_len; /* received frame length */
+ u16 xfr_len; /* tranferred length */
+};
+
+#pragma pack()
+
+#endif /* __BFI_UF_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_cna_trcmod.h CNA trace modules
+ */
+
+#ifndef __BFA_CNA_TRCMOD_H__
+#define __BFA_CNA_TRCMOD_H__
+
+#include <cs/bfa_trc.h>
+
+/*
+ * !!! Only append to the enums defined here to avoid any versioning
+ * !!! needed between trace utility and driver version
+ */
+enum {
+ BFA_TRC_CNA_CEE = 1,
+ BFA_TRC_CNA_PORT = 2,
+};
+
+#endif /* __BFA_CNA_TRCMOD_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_CEE_H__
+#define __BFA_CEE_H__
+
+#include <defs/bfa_defs_cee.h>
+#include <bfa_ioc.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+
+typedef void (*bfa_cee_get_attr_cbfn_t) (void *dev, bfa_status_t status);
+typedef void (*bfa_cee_get_stats_cbfn_t) (void *dev, bfa_status_t status);
+typedef void (*bfa_cee_reset_stats_cbfn_t) (void *dev, bfa_status_t status);
+typedef void (*bfa_cee_hbfail_cbfn_t) (void *dev, bfa_status_t status);
+
+struct bfa_cee_cbfn_s {
+ bfa_cee_get_attr_cbfn_t get_attr_cbfn;
+ void *get_attr_cbarg;
+ bfa_cee_get_stats_cbfn_t get_stats_cbfn;
+ void *get_stats_cbarg;
+ bfa_cee_reset_stats_cbfn_t reset_stats_cbfn;
+ void *reset_stats_cbarg;
+};
+
+struct bfa_cee_s {
+ void *dev;
+ bfa_boolean_t get_attr_pending;
+ bfa_boolean_t get_stats_pending;
+ bfa_boolean_t reset_stats_pending;
+ bfa_status_t get_attr_status;
+ bfa_status_t get_stats_status;
+ bfa_status_t reset_stats_status;
+ struct bfa_cee_cbfn_s cbfn;
+ struct bfa_ioc_hbfail_notify_s hbfail;
+ struct bfa_trc_mod_s *trcmod;
+ struct bfa_log_mod_s *logmod;
+ struct bfa_cee_attr_s *attr;
+ struct bfa_cee_stats_s *stats;
+ struct bfa_dma_s attr_dma;
+ struct bfa_dma_s stats_dma;
+ struct bfa_ioc_s *ioc;
+ struct bfa_mbox_cmd_s get_cfg_mb;
+ struct bfa_mbox_cmd_s get_stats_mb;
+ struct bfa_mbox_cmd_s reset_stats_mb;
+};
+
+u32 bfa_cee_meminfo(void);
+void bfa_cee_mem_claim(struct bfa_cee_s *cee, u8 *dma_kva,
+ u64 dma_pa);
+void bfa_cee_attach(struct bfa_cee_s *cee, struct bfa_ioc_s *ioc, void *dev,
+ struct bfa_trc_mod_s *trcmod,
+ struct bfa_log_mod_s *logmod);
+void bfa_cee_detach(struct bfa_cee_s *cee);
+bfa_status_t bfa_cee_get_attr(struct bfa_cee_s *cee,
+ struct bfa_cee_attr_s *attr,
+ bfa_cee_get_attr_cbfn_t cbfn, void *cbarg);
+bfa_status_t bfa_cee_get_stats(struct bfa_cee_s *cee,
+ struct bfa_cee_stats_s *stats,
+ bfa_cee_get_stats_cbfn_t cbfn, void *cbarg);
+bfa_status_t bfa_cee_reset_stats(struct bfa_cee_s *cee,
+ bfa_cee_reset_stats_cbfn_t cbfn, void *cbarg);
+#endif /* __BFA_CEE_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_PORT_H__
+#define __BFA_PORT_H__
+
+#include <defs/bfa_defs_port.h>
+#include <bfa_ioc.h>
+#include <cs/bfa_trc.h>
+#include <cs/bfa_log.h>
+
+typedef void (*bfa_port_stats_cbfn_t) (void *dev, bfa_status_t status);
+typedef void (*bfa_port_endis_cbfn_t) (void *dev, bfa_status_t status);
+
+struct bfa_port_s {
+ void *dev;
+ struct bfa_ioc_s *ioc;
+ struct bfa_trc_mod_s *trcmod;
+ struct bfa_log_mod_s *logmod;
+ u32 msgtag;
+ bfa_boolean_t stats_busy;
+ struct bfa_mbox_cmd_s stats_mb;
+ bfa_port_stats_cbfn_t stats_cbfn;
+ void *stats_cbarg;
+ bfa_status_t stats_status;
+ union bfa_pport_stats_u *stats;
+ struct bfa_dma_s stats_dma;
+ bfa_boolean_t endis_pending;
+ struct bfa_mbox_cmd_s endis_mb;
+ bfa_port_endis_cbfn_t endis_cbfn;
+ void *endis_cbarg;
+ bfa_status_t endis_status;
+ struct bfa_ioc_hbfail_notify_s hbfail;
+};
+
+void bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
+ void *dev, struct bfa_trc_mod_s *trcmod,
+ struct bfa_log_mod_s *logmod);
+void bfa_port_detach(struct bfa_port_s *port);
+void bfa_port_hbfail(void *arg);
+
+bfa_status_t bfa_port_get_stats(struct bfa_port_s *port,
+ union bfa_pport_stats_u *stats,
+ bfa_port_stats_cbfn_t cbfn, void *cbarg);
+bfa_status_t bfa_port_clear_stats(struct bfa_port_s *port,
+ bfa_port_stats_cbfn_t cbfn, void *cbarg);
+bfa_status_t bfa_port_enable(struct bfa_port_s *port,
+ bfa_port_endis_cbfn_t cbfn, void *cbarg);
+bfa_status_t bfa_port_disable(struct bfa_port_s *port,
+ bfa_port_endis_cbfn_t cbfn, void *cbarg);
+u32 bfa_port_meminfo(void);
+void bfa_port_mem_claim(struct bfa_port_s *port, u8 *dma_kva,
+ u64 dma_pa);
+
+#endif /* __BFA_PORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __ETHPORT_DEFS_H__
+#define __ETHPORT_DEFS_H__
+
+struct bnad_drv_stats {
+ u64 netif_queue_stop;
+ u64 netif_queue_wakeup;
+ u64 tso4;
+ u64 tso6;
+ u64 tso_err;
+ u64 tcpcsum_offload;
+ u64 udpcsum_offload;
+ u64 csum_help;
+ u64 csum_help_err;
+
+ u64 hw_stats_updates;
+ u64 netif_rx_schedule;
+ u64 netif_rx_complete;
+ u64 netif_rx_dropped;
+};
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved.
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __PHYPORT_DEFS_H__
+#define __PHYPORT_DEFS_H__
+
+#define BNA_TXF_ID_MAX 64
+#define BNA_RXF_ID_MAX 64
+
+/*
+ * Statistics
+ */
+
+/*
+ * TxF Frame Statistics
+ */
+struct bna_stats_txf {
+ u64 ucast_octets;
+ u64 ucast;
+ u64 ucast_vlan;
+
+ u64 mcast_octets;
+ u64 mcast;
+ u64 mcast_vlan;
+
+ u64 bcast_octets;
+ u64 bcast;
+ u64 bcast_vlan;
+
+ u64 errors;
+ u64 filter_vlan; /* frames filtered due to VLAN */
+ u64 filter_mac_sa; /* frames filtered due to SA check */
+};
+
+/*
+ * RxF Frame Statistics
+ */
+struct bna_stats_rxf {
+ u64 ucast_octets;
+ u64 ucast;
+ u64 ucast_vlan;
+
+ u64 mcast_octets;
+ u64 mcast;
+ u64 mcast_vlan;
+
+ u64 bcast_octets;
+ u64 bcast;
+ u64 bcast_vlan;
+ u64 frame_drops;
+};
+
+/*
+ * FC Tx Frame Statistics
+ */
+struct bna_stats_fc_tx {
+ u64 txf_ucast_octets;
+ u64 txf_ucast;
+ u64 txf_ucast_vlan;
+
+ u64 txf_mcast_octets;
+ u64 txf_mcast;
+ u64 txf_mcast_vlan;
+
+ u64 txf_bcast_octets;
+ u64 txf_bcast;
+ u64 txf_bcast_vlan;
+
+ u64 txf_parity_errors;
+ u64 txf_timeout;
+ u64 txf_fid_parity_errors;
+};
+
+/*
+ * FC Rx Frame Statistics
+ */
+struct bna_stats_fc_rx {
+ u64 rxf_ucast_octets;
+ u64 rxf_ucast;
+ u64 rxf_ucast_vlan;
+
+ u64 rxf_mcast_octets;
+ u64 rxf_mcast;
+ u64 rxf_mcast_vlan;
+
+ u64 rxf_bcast_octets;
+ u64 rxf_bcast;
+ u64 rxf_bcast_vlan;
+};
+
+/*
+ * RAD Frame Statistics
+ */
+struct cna_stats_rad {
+ u64 rx_frames;
+ u64 rx_octets;
+ u64 rx_vlan_frames;
+
+ u64 rx_ucast;
+ u64 rx_ucast_octets;
+ u64 rx_ucast_vlan;
+
+ u64 rx_mcast;
+ u64 rx_mcast_octets;
+ u64 rx_mcast_vlan;
+
+ u64 rx_bcast;
+ u64 rx_bcast_octets;
+ u64 rx_bcast_vlan;
+
+ u64 rx_drops;
+};
+
+/*
+ * BPC Tx Registers
+ */
+struct cna_stats_bpc_tx {
+ u64 tx_pause[8];
+ u64 tx_zero_pause[8]; /* Pause cancellation */
+ u64 tx_first_pause[8]; /* Pause initiation rather
+ *than retention */
+};
+
+/*
+ * BPC Rx Registers
+ */
+struct cna_stats_bpc_rx {
+ u64 rx_pause[8];
+ u64 rx_zero_pause[8]; /* Pause cancellation */
+ u64 rx_first_pause[8]; /* Pause initiation rather
+ *than retention */
+};
+
+/*
+ * MAC Rx Statistics
+ */
+struct cna_stats_mac_rx {
+ u64 frame_64; /* both rx and tx counter */
+ u64 frame_65_127; /* both rx and tx counter */
+ u64 frame_128_255; /* both rx and tx counter */
+ u64 frame_256_511; /* both rx and tx counter */
+ u64 frame_512_1023; /* both rx and tx counter */
+ u64 frame_1024_1518; /* both rx and tx counter */
+ u64 frame_1518_1522; /* both rx and tx counter */
+ u64 rx_bytes;
+ u64 rx_packets;
+ u64 rx_fcs_error;
+ u64 rx_multicast;
+ u64 rx_broadcast;
+ u64 rx_control_frames;
+ u64 rx_pause;
+ u64 rx_unknown_opcode;
+ u64 rx_alignment_error;
+ u64 rx_frame_length_error;
+ u64 rx_code_error;
+ u64 rx_carrier_sense_error;
+ u64 rx_undersize;
+ u64 rx_oversize;
+ u64 rx_fragments;
+ u64 rx_jabber;
+ u64 rx_drop;
+};
+
+/*
+ * MAC Tx Statistics
+ */
+struct cna_stats_mac_tx {
+ u64 tx_bytes;
+ u64 tx_packets;
+ u64 tx_multicast;
+ u64 tx_broadcast;
+ u64 tx_pause;
+ u64 tx_deferral;
+ u64 tx_excessive_deferral;
+ u64 tx_single_collision;
+ u64 tx_muliple_collision;
+ u64 tx_late_collision;
+ u64 tx_excessive_collision;
+ u64 tx_total_collision;
+ u64 tx_pause_honored;
+ u64 tx_drop;
+ u64 tx_jabber;
+ u64 tx_fcs_error;
+ u64 tx_control_frame;
+ u64 tx_oversize;
+ u64 tx_undersize;
+ u64 tx_fragments;
+};
+
+/*
+ * Complete statistics
+ */
+struct bna_stats {
+ struct cna_stats_mac_rx mac_rx_stats;
+ struct cna_stats_bpc_rx bpc_rx_stats;
+ struct cna_stats_rad rad_stats;
+ struct bna_stats_fc_rx fc_rx_stats;
+ struct cna_stats_mac_tx mac_tx_stats;
+ struct cna_stats_bpc_tx bpc_tx_stats;
+ struct bna_stats_fc_tx fc_tx_stats;
+ struct bna_stats_rxf rxf_stats[BNA_TXF_ID_MAX];
+ struct bna_stats_txf txf_stats[BNA_RXF_ID_MAX];
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_checksum.h BFA checksum utilities
+ */
+
+#ifndef __BFA_CHECKSUM_H__
+#define __BFA_CHECKSUM_H__
+
+static inline u32
+bfa_checksum_u32(u32 *buf, int sz)
+{
+ int i, m = sz >> 2;
+ u32 sum = 0;
+
+ for (i = 0; i < m; i++)
+ sum ^= buf[i];
+
+ return (sum);
+}
+
+static inline u16
+bfa_checksum_u16(u16 *buf, int sz)
+{
+ int i, m = sz >> 1;
+ u16 sum = 0;
+
+ for (i = 0; i < m; i++)
+ sum ^= buf[i];
+
+ return (sum);
+}
+
+static inline u8
+bfa_checksum_u8(u8 *buf, int sz)
+{
+ int i;
+ u8 sum = 0;
+
+ for (i = 0; i < sz; i++)
+ sum ^= buf[i];
+
+ return (sum);
+}
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_debug.h BFA debug interfaces
+ */
+
+#ifndef __BFA_DEBUG_H__
+#define __BFA_DEBUG_H__
+
+#define bfa_assert(__cond) do { \
+ if (!(__cond)) \
+ bfa_panic(__LINE__, __FILE__, #__cond); \
+} while (0)
+
+#define bfa_sm_fault(__mod, __event) do { \
+ bfa_sm_panic((__mod)->logm, __LINE__, __FILE__, __event); \
+} while (0)
+
+#ifndef BFA_PERF_BUILD
+#define bfa_assert_fp(__cond) bfa_assert(__cond)
+#else
+#define bfa_assert_fp(__cond)
+#endif
+
+struct bfa_log_mod_s;
+void bfa_panic(int line, char *file, char *panicstr);
+void bfa_sm_panic(struct bfa_log_mod_s *logm, int line, char *file, int event);
+
+#endif /* __BFA_DEBUG_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_log.h BFA log library data structure and function definition
+ */
+
+#ifndef __BFA_LOG_H__
+#define __BFA_LOG_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_aen.h>
+
+/*
+ * BFA log module definition
+ *
+ * To create a new module id:
+ * Add a #define at the end of the list below. Select a value for your
+ * definition so that it is one (1) greater than the previous
+ * definition. Modify the definition of BFA_LOG_MODULE_ID_MAX to become
+ * your new definition.
+ * Should have no gaps in between the values because this is used in arrays.
+ * IMPORTANT: AEN_IDs must be at the begining, otherwise update bfa_defs_aen.h
+ */
+
+enum bfa_log_module_id {
+ BFA_LOG_UNUSED_ID = 0,
+
+ /* AEN defs begin */
+ BFA_LOG_AEN_MIN = BFA_LOG_UNUSED_ID,
+
+ BFA_LOG_AEN_ID_ADAPTER = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ADAPTER,/* 1 */
+ BFA_LOG_AEN_ID_PORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_PORT, /* 2 */
+ BFA_LOG_AEN_ID_LPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_LPORT, /* 3 */
+ BFA_LOG_AEN_ID_RPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_RPORT, /* 4 */
+ BFA_LOG_AEN_ID_ITNIM = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ITNIM, /* 5 */
+ BFA_LOG_AEN_ID_TIN = BFA_LOG_AEN_MIN + BFA_AEN_CAT_TIN, /* 6 */
+ BFA_LOG_AEN_ID_IPFC = BFA_LOG_AEN_MIN + BFA_AEN_CAT_IPFC, /* 7 */
+ BFA_LOG_AEN_ID_AUDIT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_AUDIT, /* 8 */
+ BFA_LOG_AEN_ID_IOC = BFA_LOG_AEN_MIN + BFA_AEN_CAT_IOC, /* 9 */
+ BFA_LOG_AEN_ID_ETHPORT = BFA_LOG_AEN_MIN + BFA_AEN_CAT_ETHPORT,/* 10 */
+
+ BFA_LOG_AEN_MAX = BFA_LOG_AEN_ID_ETHPORT,
+ /* AEN defs end */
+
+ BFA_LOG_MODULE_ID_MIN = BFA_LOG_AEN_MAX,
+
+ BFA_LOG_FW_ID = BFA_LOG_MODULE_ID_MIN + 1,
+ BFA_LOG_HAL_ID = BFA_LOG_MODULE_ID_MIN + 2,
+ BFA_LOG_FCS_ID = BFA_LOG_MODULE_ID_MIN + 3,
+ BFA_LOG_WDRV_ID = BFA_LOG_MODULE_ID_MIN + 4,
+ BFA_LOG_LINUX_ID = BFA_LOG_MODULE_ID_MIN + 5,
+ BFA_LOG_SOLARIS_ID = BFA_LOG_MODULE_ID_MIN + 6,
+
+ BFA_LOG_MODULE_ID_MAX = BFA_LOG_SOLARIS_ID,
+
+ /* Not part of any arrays */
+ BFA_LOG_MODULE_ID_ALL = BFA_LOG_MODULE_ID_MAX + 1,
+ BFA_LOG_AEN_ALL = BFA_LOG_MODULE_ID_MAX + 2,
+ BFA_LOG_DRV_ALL = BFA_LOG_MODULE_ID_MAX + 3,
+};
+
+/*
+ * BFA log catalog name
+ */
+#define BFA_LOG_CAT_NAME "BFA"
+
+/*
+ * bfa log severity values
+ */
+enum bfa_log_severity {
+ BFA_LOG_INVALID = 0,
+ BFA_LOG_CRITICAL = 1,
+ BFA_LOG_ERROR = 2,
+ BFA_LOG_WARNING = 3,
+ BFA_LOG_INFO = 4,
+ BFA_LOG_NONE = 5,
+ BFA_LOG_LEVEL_MAX = BFA_LOG_NONE
+};
+
+#define BFA_LOG_MODID_OFFSET 16
+
+
+struct bfa_log_msgdef_s {
+ u32 msg_id; /* message id */
+ int attributes; /* attributes */
+ int severity; /* severity level */
+ char *msg_value;
+ /* msg string */
+ char *message;
+ /* msg format string */
+ int arg_type; /* argument type */
+ int arg_num; /* number of argument */
+};
+
+/*
+ * supported argument type
+ */
+enum bfa_log_arg_type {
+ BFA_LOG_S = 0, /* string */
+ BFA_LOG_D, /* decimal */
+ BFA_LOG_I, /* integer */
+ BFA_LOG_O, /* oct number */
+ BFA_LOG_U, /* unsigned integer */
+ BFA_LOG_X, /* hex number */
+ BFA_LOG_F, /* floating */
+ BFA_LOG_C, /* character */
+ BFA_LOG_L, /* double */
+ BFA_LOG_P /* pointer */
+};
+
+#define BFA_LOG_ARG_TYPE 2
+#define BFA_LOG_ARG0 (0 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG1 (1 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG2 (2 * BFA_LOG_ARG_TYPE)
+#define BFA_LOG_ARG3 (3 * BFA_LOG_ARG_TYPE)
+
+#define BFA_LOG_GET_MOD_ID(msgid) ((msgid >> BFA_LOG_MODID_OFFSET) & 0xff)
+#define BFA_LOG_GET_MSG_IDX(msgid) (msgid & 0xffff)
+#define BFA_LOG_GET_MSG_ID(msgdef) ((msgdef)->msg_id)
+#define BFA_LOG_GET_MSG_FMT_STRING(msgdef) ((msgdef)->message)
+#define BFA_LOG_GET_SEVERITY(msgdef) ((msgdef)->severity)
+
+/*
+ * Event attributes
+ */
+#define BFA_LOG_ATTR_NONE 0
+#define BFA_LOG_ATTR_AUDIT 1
+#define BFA_LOG_ATTR_LOG 2
+#define BFA_LOG_ATTR_FFDC 4
+
+#define BFA_LOG_CREATE_ID(msw, lsw) \
+ (((u32)msw << BFA_LOG_MODID_OFFSET) | lsw)
+
+struct bfa_log_mod_s;
+
+/**
+ * callback function
+ */
+typedef void (*bfa_log_cb_t)(struct bfa_log_mod_s *log_mod, u32 msg_id,
+ const char *format, ...);
+
+
+struct bfa_log_mod_s {
+ char instance_info[16]; /* instance info */
+ int log_level[BFA_LOG_MODULE_ID_MAX + 1];
+ /* log level for modules */
+ bfa_log_cb_t cbfn; /* callback function */
+};
+
+extern int bfa_log_init(struct bfa_log_mod_s *log_mod,
+ char *instance_name, bfa_log_cb_t cbfn);
+extern int bfa_log(struct bfa_log_mod_s *log_mod, u32 msg_id, ...);
+extern bfa_status_t bfa_log_set_level(struct bfa_log_mod_s *log_mod,
+ int mod_id, enum bfa_log_severity log_level);
+extern bfa_status_t bfa_log_set_level_all(struct bfa_log_mod_s *log_mod,
+ enum bfa_log_severity log_level);
+extern bfa_status_t bfa_log_set_level_aen(struct bfa_log_mod_s *log_mod,
+ enum bfa_log_severity log_level);
+extern enum bfa_log_severity bfa_log_get_level(struct bfa_log_mod_s *log_mod,
+ int mod_id);
+extern enum bfa_log_severity bfa_log_get_msg_level(
+ struct bfa_log_mod_s *log_mod, u32 msg_id);
+/*
+ * array of messages generated from xml files
+ */
+extern struct bfa_log_msgdef_s bfa_log_msg_array[];
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFAD_PERF_H__
+#define __BFAD_PERF_H__
+
+#ifdef BFAD_PERF_BUILD
+
+#undef bfa_trc
+#undef bfa_trc32
+#undef bfa_assert
+#undef BFA_TRC_FILE
+
+#define bfa_trc(_trcp, _data)
+#define bfa_trc32(_trcp, _data)
+#define bfa_assert(__cond)
+#define BFA_TRC_FILE(__mod, __submod)
+
+#endif
+
+#endif /* __BFAD_PERF_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_PORTLOG_H__
+#define __BFA_PORTLOG_H__
+
+#include "protocol/fc.h"
+#include <defs/bfa_defs_types.h>
+
+#define BFA_PL_NLOG_ENTS 256
+#define BFA_PL_LOG_REC_INCR(_x) ((_x)++, (_x) %= BFA_PL_NLOG_ENTS)
+
+#define BFA_PL_STRING_LOG_SZ 32 /* number of chars in string log */
+#define BFA_PL_INT_LOG_SZ 8 /* number of integers in the integer log */
+
+enum bfa_plog_log_type {
+ BFA_PL_LOG_TYPE_INVALID = 0,
+ BFA_PL_LOG_TYPE_INT = 1,
+ BFA_PL_LOG_TYPE_STRING = 2,
+};
+
+/*
+ * the (fixed size) record format for each entry in the portlog
+ */
+struct bfa_plog_rec_s {
+ u32 tv; /* Filled by the portlog driver when the *
+ * entry is added to the circular log. */
+ u8 port; /* Source port that logged this entry. CM
+ * entities will use 0xFF */
+ u8 mid; /* Integer value to be used by all entities *
+ * while logging. The module id to string *
+ * conversion will be done by BFAL. See
+ * enum bfa_plog_mid */
+ u8 eid; /* indicates Rx, Tx, IOCTL, etc. See
+ * enum bfa_plog_eid */
+ u8 log_type; /* indicates string log or integer log.
+ * see bfa_plog_log_type_t */
+ u8 log_num_ints;
+ /*
+ * interpreted only if log_type is INT_LOG. indicates number of
+ * integers in the int_log[] (0-PL_INT_LOG_SZ).
+ */
+ u8 rsvd;
+ u16 misc; /* can be used to indicate fc frame length,
+ *etc.. */
+ union {
+ char string_log[BFA_PL_STRING_LOG_SZ];
+ u32 int_log[BFA_PL_INT_LOG_SZ];
+ } log_entry;
+
+};
+
+/*
+ * the following #defines will be used by the logging entities to indicate
+ * their module id. BFAL will convert the integer value to string format
+ *
+* process to be used while changing the following #defines:
+ * - Always add new entries at the end
+ * - define corresponding string in BFAL
+ * - Do not remove any entry or rearrange the order.
+ */
+enum bfa_plog_mid {
+ BFA_PL_MID_INVALID = 0,
+ BFA_PL_MID_DEBUG = 1,
+ BFA_PL_MID_DRVR = 2,
+ BFA_PL_MID_HAL = 3,
+ BFA_PL_MID_HAL_FCXP = 4,
+ BFA_PL_MID_HAL_UF = 5,
+ BFA_PL_MID_FCS = 6,
+ BFA_PL_MID_MAX = 7
+};
+
+#define BFA_PL_MID_STRLEN 8
+struct bfa_plog_mid_strings_s {
+ char m_str[BFA_PL_MID_STRLEN];
+};
+
+/*
+ * the following #defines will be used by the logging entities to indicate
+ * their event type. BFAL will convert the integer value to string format
+ *
+* process to be used while changing the following #defines:
+ * - Always add new entries at the end
+ * - define corresponding string in BFAL
+ * - Do not remove any entry or rearrange the order.
+ */
+enum bfa_plog_eid {
+ BFA_PL_EID_INVALID = 0,
+ BFA_PL_EID_IOC_DISABLE = 1,
+ BFA_PL_EID_IOC_ENABLE = 2,
+ BFA_PL_EID_PORT_DISABLE = 3,
+ BFA_PL_EID_PORT_ENABLE = 4,
+ BFA_PL_EID_PORT_ST_CHANGE = 5,
+ BFA_PL_EID_TX = 6,
+ BFA_PL_EID_TX_ACK1 = 7,
+ BFA_PL_EID_TX_RJT = 8,
+ BFA_PL_EID_TX_BSY = 9,
+ BFA_PL_EID_RX = 10,
+ BFA_PL_EID_RX_ACK1 = 11,
+ BFA_PL_EID_RX_RJT = 12,
+ BFA_PL_EID_RX_BSY = 13,
+ BFA_PL_EID_CT_IN = 14,
+ BFA_PL_EID_CT_OUT = 15,
+ BFA_PL_EID_DRIVER_START = 16,
+ BFA_PL_EID_RSCN = 17,
+ BFA_PL_EID_DEBUG = 18,
+ BFA_PL_EID_MISC = 19,
+ BFA_PL_EID_MAX = 20
+};
+
+#define BFA_PL_ENAME_STRLEN 8
+struct bfa_plog_eid_strings_s {
+ char e_str[BFA_PL_ENAME_STRLEN];
+};
+
+#define BFA_PL_SIG_LEN 8
+#define BFA_PL_SIG_STR "12pl123"
+
+/*
+ * per port circular log buffer
+ */
+struct bfa_plog_s {
+ char plog_sig[BFA_PL_SIG_LEN]; /* Start signature */
+ u8 plog_enabled;
+ u8 rsvd[7];
+ u32 ticks;
+ u16 head;
+ u16 tail;
+ struct bfa_plog_rec_s plog_recs[BFA_PL_NLOG_ENTS];
+};
+
+void bfa_plog_init(struct bfa_plog_s *plog);
+void bfa_plog_str(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc, char *log_str);
+void bfa_plog_intarr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc,
+ u32 *intarr, u32 num_ints);
+void bfa_plog_fchdr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc,
+ struct fchs_s *fchdr);
+void bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc,
+ struct fchs_s *fchdr, u32 pld_w0);
+void bfa_plog_clear(struct bfa_plog_s *plog);
+void bfa_plog_enable(struct bfa_plog_s *plog);
+void bfa_plog_disable(struct bfa_plog_s *plog);
+bfa_boolean_t bfa_plog_get_setting(struct bfa_plog_s *plog);
+
+#endif /* __BFA_PORTLOG_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_q.h Circular queue definitions.
+ */
+
+#ifndef __BFA_Q_H__
+#define __BFA_Q_H__
+
+#define bfa_q_first(_q) ((void *)(((struct list_head *) (_q))->next))
+#define bfa_q_next(_qe) (((struct list_head *) (_qe))->next)
+#define bfa_q_prev(_qe) (((struct list_head *) (_qe))->prev)
+
+/*
+ * bfa_q_qe_init - to initialize a queue element
+ */
+#define bfa_q_qe_init(_qe) { \
+ bfa_q_next(_qe) = (struct list_head *) NULL; \
+ bfa_q_prev(_qe) = (struct list_head *) NULL; \
+}
+
+/*
+ * bfa_q_deq - dequeue an element from head of the queue
+ */
+#define bfa_q_deq(_q, _qe) { \
+ if (!list_empty(_q)) { \
+ (*((struct list_head **) (_qe))) = bfa_q_next(_q); \
+ bfa_q_prev(bfa_q_next(*((struct list_head **) _qe))) = \
+ (struct list_head *) (_q); \
+ bfa_q_next(_q) = bfa_q_next(*((struct list_head **) _qe)); \
+ BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
+ } else { \
+ *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+ } \
+}
+
+/*
+ * bfa_q_deq_tail - dequeue an element from tail of the queue
+ */
+#define bfa_q_deq_tail(_q, _qe) { \
+ if (!list_empty(_q)) { \
+ *((struct list_head **) (_qe)) = bfa_q_prev(_q); \
+ bfa_q_next(bfa_q_prev(*((struct list_head **) _qe))) = \
+ (struct list_head *) (_q); \
+ bfa_q_prev(_q) = bfa_q_prev(*(struct list_head **) _qe); \
+ BFA_Q_DBG_INIT(*((struct list_head **) _qe)); \
+ } else { \
+ *((struct list_head **) (_qe)) = (struct list_head *) NULL; \
+ } \
+}
+
+/*
+ * #ifdef BFA_DEBUG (Using bfa_assert to check for debug_build is not
+ * consistent across modules)
+ */
+#ifndef BFA_PERF_BUILD
+#define BFA_Q_DBG_INIT(_qe) bfa_q_qe_init(_qe)
+#else
+#define BFA_Q_DBG_INIT(_qe)
+#endif
+
+#define bfa_q_is_on_q(_q, _qe) \
+ bfa_q_is_on_q_func(_q, (struct list_head *)(_qe))
+extern int bfa_q_is_on_q_func(struct list_head *q, struct list_head *qe);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfasm.h State machine defines
+ */
+
+#ifndef __BFA_SM_H__
+#define __BFA_SM_H__
+
+typedef void (*bfa_sm_t)(void *sm, int event);
+
+#define bfa_sm_set_state(_sm, _state) (_sm)->sm = (bfa_sm_t)(_state)
+#define bfa_sm_send_event(_sm, _event) (_sm)->sm((_sm), (_event))
+#define bfa_sm_get_state(_sm) ((_sm)->sm)
+#define bfa_sm_cmp_state(_sm, _state) ((_sm)->sm == (bfa_sm_t)(_state))
+
+/**
+ * For converting from state machine function to state encoding.
+ */
+struct bfa_sm_table_s {
+ bfa_sm_t sm; /* state machine function */
+ int state; /* state machine encoding */
+ char *name; /* state name for display */
+};
+#define BFA_SM(_sm) ((bfa_sm_t)(_sm))
+
+int bfa_sm_to_state(struct bfa_sm_table_s *smt, bfa_sm_t sm);
+
+/**
+ * State machine with entry actions.
+ */
+typedef void (*bfa_fsm_t)(void *fsm, int event);
+
+/**
+ * oc - object class eg. bfa_ioc
+ * st - state, eg. reset
+ * otype - object type, eg. struct bfa_ioc_s
+ * etype - object type, eg. enum ioc_event
+ */
+#define bfa_fsm_state_decl(oc, st, otype, etype) \
+ static void oc ## _sm_ ## st(otype * fsm, etype event); \
+ static void oc ## _sm_ ## st ## _entry(otype * fsm)
+
+#define bfa_fsm_set_state(_fsm, _state) do { \
+ (_fsm)->fsm = (bfa_fsm_t)(_state); \
+ _state ## _entry(_fsm); \
+} while (0)
+
+#define bfa_fsm_send_event(_fsm, _event) \
+ (_fsm)->fsm((_fsm), (_event))
+#define bfa_fsm_cmp_state(_fsm, _state) \
+ ((_fsm)->fsm == (bfa_fsm_t)(_state))
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_TRC_H__
+#define __BFA_TRC_H__
+
+#include <bfa_os_inc.h>
+
+#ifndef BFA_TRC_MAX
+#define BFA_TRC_MAX (4 * 1024)
+#endif
+
+#ifndef BFA_TRC_TS
+#define BFA_TRC_TS(_trcm) ((_trcm)->ticks ++)
+#endif
+
+struct bfa_trc_s {
+#ifdef __BIGENDIAN
+ u16 fileno;
+ u16 line;
+#else
+ u16 line;
+ u16 fileno;
+#endif
+ u32 timestamp;
+ union {
+ struct {
+ u32 rsvd;
+ u32 u32;
+ } u32;
+ u64 u64;
+ } data;
+};
+
+
+struct bfa_trc_mod_s {
+ u32 head;
+ u32 tail;
+ u32 ntrc;
+ u32 stopped;
+ u32 ticks;
+ u32 rsvd[3];
+ struct bfa_trc_s trc[BFA_TRC_MAX];
+};
+
+
+enum {
+ BFA_TRC_FW = 1, /* firmware modules */
+ BFA_TRC_HAL = 2, /* BFA modules */
+ BFA_TRC_FCS = 3, /* BFA FCS modules */
+ BFA_TRC_LDRV = 4, /* Linux driver modules */
+ BFA_TRC_SDRV = 5, /* Solaris driver modules */
+ BFA_TRC_VDRV = 6, /* vmware driver modules */
+ BFA_TRC_WDRV = 7, /* windows driver modules */
+ BFA_TRC_AEN = 8, /* AEN module */
+ BFA_TRC_BIOS = 9, /* bios driver modules */
+ BFA_TRC_EFI = 10, /* EFI driver modules */
+ BNA_TRC_WDRV = 11, /* BNA windows driver modules */
+ BNA_TRC_VDRV = 12, /* BNA vmware driver modules */
+ BNA_TRC_SDRV = 13, /* BNA Solaris driver modules */
+ BNA_TRC_LDRV = 14, /* BNA Linux driver modules */
+ BNA_TRC_HAL = 15, /* BNA modules */
+ BFA_TRC_CNA = 16, /* Common modules */
+ BNA_TRC_IMDRV = 17 /* BNA windows intermediate driver modules */
+};
+#define BFA_TRC_MOD_SH 10
+#define BFA_TRC_MOD(__mod) ((BFA_TRC_ ## __mod) << BFA_TRC_MOD_SH)
+
+/**
+ * Define a new tracing file (module). Module should match one defined above.
+ */
+#define BFA_TRC_FILE(__mod, __submod) \
+ static int __trc_fileno = ((BFA_TRC_ ## __mod ## _ ## __submod) | \
+ BFA_TRC_MOD(__mod))
+
+
+#define bfa_trc32(_trcp, _data) \
+ __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
+
+
+#ifndef BFA_BOOT_BUILD
+#define bfa_trc(_trcp, _data) \
+ __bfa_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u64)_data)
+#else
+void bfa_boot_trc(struct bfa_trc_mod_s *trcmod, u16 fileno,
+ u16 line, u32 data);
+#define bfa_trc(_trcp, _data) \
+ bfa_boot_trc((_trcp)->trcmod, __trc_fileno, __LINE__, (u32)_data)
+#endif
+
+
+static inline void
+bfa_trc_init(struct bfa_trc_mod_s *trcm)
+{
+ trcm->head = trcm->tail = trcm->stopped = 0;
+ trcm->ntrc = BFA_TRC_MAX;
+}
+
+
+static inline void
+bfa_trc_stop(struct bfa_trc_mod_s *trcm)
+{
+ trcm->stopped = 1;
+}
+
+#ifdef FWTRC
+extern void dc_flush(void *data);
+#else
+#define dc_flush(data)
+#endif
+
+
+static inline void
+__bfa_trc(struct bfa_trc_mod_s *trcm, int fileno, int line, u64 data)
+{
+ int tail = trcm->tail;
+ struct bfa_trc_s *trc = &trcm->trc[tail];
+
+ if (trcm->stopped)
+ return;
+
+ trc->fileno = (u16) fileno;
+ trc->line = (u16) line;
+ trc->data.u64 = data;
+ trc->timestamp = BFA_TRC_TS(trcm);
+ dc_flush(trc);
+
+ trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
+ if (trcm->tail == trcm->head)
+ trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
+ dc_flush(trcm);
+}
+
+
+static inline void
+__bfa_trc32(struct bfa_trc_mod_s *trcm, int fileno, int line, u32 data)
+{
+ int tail = trcm->tail;
+ struct bfa_trc_s *trc = &trcm->trc[tail];
+
+ if (trcm->stopped)
+ return;
+
+ trc->fileno = (u16) fileno;
+ trc->line = (u16) line;
+ trc->data.u32.u32 = data;
+ trc->timestamp = BFA_TRC_TS(trcm);
+ dc_flush(trc);
+
+ trcm->tail = (trcm->tail + 1) & (BFA_TRC_MAX - 1);
+ if (trcm->tail == trcm->head)
+ trcm->head = (trcm->head + 1) & (BFA_TRC_MAX - 1);
+ dc_flush(trcm);
+}
+
+#ifndef BFA_PERF_BUILD
+#define bfa_trc_fp(_trcp, _data) bfa_trc(_trcp, _data)
+#else
+#define bfa_trc_fp(_trcp, _data)
+#endif
+
+#endif /* __BFA_TRC_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_wc.h Generic wait counter.
+ */
+
+#ifndef __BFA_WC_H__
+#define __BFA_WC_H__
+
+typedef void (*bfa_wc_resume_t) (void *cbarg);
+
+struct bfa_wc_s {
+ bfa_wc_resume_t wc_resume;
+ void *wc_cbarg;
+ int wc_count;
+};
+
+static inline void
+bfa_wc_up(struct bfa_wc_s *wc)
+{
+ wc->wc_count++;
+}
+
+static inline void
+bfa_wc_down(struct bfa_wc_s *wc)
+{
+ wc->wc_count--;
+ if (wc->wc_count == 0)
+ wc->wc_resume(wc->wc_cbarg);
+}
+
+/**
+ * Initialize a waiting counter.
+ */
+static inline void
+bfa_wc_init(struct bfa_wc_s *wc, bfa_wc_resume_t wc_resume, void *wc_cbarg)
+{
+ wc->wc_resume = wc_resume;
+ wc->wc_cbarg = wc_cbarg;
+ wc->wc_count = 0;
+ bfa_wc_up(wc);
+}
+
+/**
+ * Wait for counter to reach zero
+ */
+static inline void
+bfa_wc_wait(struct bfa_wc_s *wc)
+{
+ bfa_wc_down(wc);
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_ADAPTER_H__
+#define __BFA_DEFS_ADAPTER_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_mfg.h>
+
+/**
+ * BFA adapter level attributes.
+ */
+enum {
+ BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE),
+ /*
+ *!< adapter serial num length
+ */
+ BFA_ADAPTER_MODEL_NAME_LEN = 16, /* model name length */
+ BFA_ADAPTER_MODEL_DESCR_LEN = 128, /* model description length */
+ BFA_ADAPTER_MFG_NAME_LEN = 8, /* manufacturer name length */
+ BFA_ADAPTER_SYM_NAME_LEN = 64, /* adapter symbolic name length */
+ BFA_ADAPTER_OS_TYPE_LEN = 64, /* adapter os type length */
+};
+
+struct bfa_adapter_attr_s {
+ char manufacturer[BFA_ADAPTER_MFG_NAME_LEN];
+ char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+ u32 rsvd1;
+ char model[BFA_ADAPTER_MODEL_NAME_LEN];
+ char model_descr[BFA_ADAPTER_MODEL_DESCR_LEN];
+ wwn_t pwwn;
+ char node_symname[FC_SYMNAME_MAX];
+ char hw_ver[BFA_VERSION_LEN];
+ char fw_ver[BFA_VERSION_LEN];
+ char optrom_ver[BFA_VERSION_LEN];
+ char os_type[BFA_ADAPTER_OS_TYPE_LEN];
+ struct bfa_mfg_vpd_s vpd;
+ struct mac_s mac;
+
+ u8 nports;
+ u8 max_speed;
+ u8 prototype;
+ char asic_rev;
+
+ u8 pcie_gen;
+ u8 pcie_lanes_orig;
+ u8 pcie_lanes;
+ u8 cna_capable;
+};
+
+/**
+ * BFA adapter level events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ADD: [in]: None [out]: serial_num, pwwn, nports
+ * BFA_PORT_AEN_REMOVE: [in]: pwwn [out]: serial_num, pwwn, nports
+ */
+enum bfa_adapter_aen_event {
+ BFA_ADAPTER_AEN_ADD = 1, /* New Adapter found event */
+ BFA_ADAPTER_AEN_REMOVE = 2, /* Adapter removed event */
+};
+
+struct bfa_adapter_aen_data_s {
+ char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN];
+ u32 nports; /* Number of NPorts */
+ wwn_t pwwn; /* WWN of one of its physical port */
+};
+
+#endif /* __BFA_DEFS_ADAPTER_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_AEN_H__
+#define __BFA_DEFS_AEN_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_ioc.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_lport.h>
+#include <defs/bfa_defs_rport.h>
+#include <defs/bfa_defs_itnim.h>
+#include <defs/bfa_defs_tin.h>
+#include <defs/bfa_defs_ipfc.h>
+#include <defs/bfa_defs_audit.h>
+#include <defs/bfa_defs_ethport.h>
+
+enum bfa_aen_category {
+ BFA_AEN_CAT_ADAPTER = 1,
+ BFA_AEN_CAT_PORT = 2,
+ BFA_AEN_CAT_LPORT = 3,
+ BFA_AEN_CAT_RPORT = 4,
+ BFA_AEN_CAT_ITNIM = 5,
+ BFA_AEN_CAT_TIN = 6,
+ BFA_AEN_CAT_IPFC = 7,
+ BFA_AEN_CAT_AUDIT = 8,
+ BFA_AEN_CAT_IOC = 9,
+ BFA_AEN_CAT_ETHPORT = 10,
+ BFA_AEN_MAX_CAT = 10
+};
+
+#pragma pack(1)
+union bfa_aen_data_u {
+ struct bfa_adapter_aen_data_s adapter;
+ struct bfa_port_aen_data_s port;
+ struct bfa_lport_aen_data_s lport;
+ struct bfa_rport_aen_data_s rport;
+ struct bfa_itnim_aen_data_s itnim;
+ struct bfa_audit_aen_data_s audit;
+ struct bfa_ioc_aen_data_s ioc;
+ struct bfa_ethport_aen_data_s ethport;
+};
+
+struct bfa_aen_entry_s {
+ enum bfa_aen_category aen_category;
+ int aen_type;
+ union bfa_aen_data_u aen_data;
+ struct bfa_timeval_s aen_tv;
+ s32 seq_num;
+ s32 bfad_num;
+ s32 rsvd[1];
+};
+
+#pragma pack()
+
+#define bfa_aen_event_t int
+
+#endif /* __BFA_DEFS_AEN_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_AUDIT_H__
+#define __BFA_DEFS_AUDIT_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * BFA audit events
+ */
+enum bfa_audit_aen_event {
+ BFA_AUDIT_AEN_AUTH_ENABLE = 1,
+ BFA_AUDIT_AEN_AUTH_DISABLE = 2,
+};
+
+/**
+ * audit event data
+ */
+struct bfa_audit_aen_data_s {
+ wwn_t pwwn;
+};
+
+#endif /* __BFA_DEFS_AUDIT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_AUTH_H__
+#define __BFA_DEFS_AUTH_H__
+
+#include <defs/bfa_defs_types.h>
+
+#define PUBLIC_KEY 15409
+#define PRIVATE_KEY 19009
+#define KEY_LEN 32399
+#define BFA_AUTH_SECRET_STRING_LEN 256
+#define BFA_AUTH_FAIL_TIMEOUT 0xFF
+
+/**
+ * Authentication status
+ */
+enum bfa_auth_status {
+ BFA_AUTH_STATUS_NONE = 0, /* no authentication */
+ BFA_AUTH_UNINIT = 1, /* state - uninit */
+ BFA_AUTH_NEG_SEND = 2, /* state - negotiate send */
+ BFA_AUTH_CHAL_WAIT = 3, /* state - challenge wait */
+ BFA_AUTH_NEG_RETRY = 4, /* state - negotiate retry */
+ BFA_AUTH_REPLY_SEND = 5, /* state - reply send */
+ BFA_AUTH_STATUS_WAIT = 6, /* state - status wait */
+ BFA_AUTH_SUCCESS = 7, /* state - success */
+ BFA_AUTH_FAILED = 8, /* state - failed */
+ BFA_AUTH_STATUS_UNKNOWN = 9, /* authentication status unknown */
+};
+
+struct auth_proto_stats_s {
+ u32 auth_rjts;
+ u32 auth_negs;
+ u32 auth_dones;
+
+ u32 dhchap_challenges;
+ u32 dhchap_replies;
+ u32 dhchap_successes;
+};
+
+/**
+ * Authentication related statistics
+ */
+struct bfa_auth_stats_s {
+ u32 auth_failures; /* authentication failures */
+ u32 auth_successes; /* authentication successes*/
+ struct auth_proto_stats_s auth_rx_stats; /* Rx protocol stats */
+ struct auth_proto_stats_s auth_tx_stats; /* Tx protocol stats */
+};
+
+/**
+ * Authentication hash function algorithms
+ */
+enum bfa_auth_algo {
+ BFA_AUTH_ALGO_MD5 = 1, /* Message-Digest algorithm 5 */
+ BFA_AUTH_ALGO_SHA1 = 2, /* Secure Hash Algorithm 1 */
+ BFA_AUTH_ALGO_MS = 3, /* MD5, then SHA-1 */
+ BFA_AUTH_ALGO_SM = 4, /* SHA-1, then MD5 */
+};
+
+/**
+ * DH Groups
+ *
+ * Current value could be combination of one or more of the following values
+ */
+enum bfa_auth_group {
+ BFA_AUTH_GROUP_DHNULL = 0, /* DH NULL (value == 0) */
+ BFA_AUTH_GROUP_DH768 = 1, /* DH group 768 (value == 1) */
+ BFA_AUTH_GROUP_DH1024 = 2, /* DH group 1024 (value == 2) */
+ BFA_AUTH_GROUP_DH1280 = 4, /* DH group 1280 (value == 3) */
+ BFA_AUTH_GROUP_DH1536 = 8, /* DH group 1536 (value == 4) */
+
+ BFA_AUTH_GROUP_ALL = 256 /* Use default DH group order
+ * 0, 1, 2, 3, 4 */
+};
+
+/**
+ * Authentication secret sources
+ */
+enum bfa_auth_secretsource {
+ BFA_AUTH_SECSRC_LOCAL = 1, /* locally configured */
+ BFA_AUTH_SECSRC_RADIUS = 2, /* use radius server */
+ BFA_AUTH_SECSRC_TACACS = 3, /* TACACS server */
+};
+
+/**
+ * Authentication attributes
+ */
+struct bfa_auth_attr_s {
+ enum bfa_auth_status status;
+ enum bfa_auth_algo algo;
+ enum bfa_auth_group dh_grp;
+ u16 rjt_code;
+ u16 rjt_code_exp;
+ u8 secret_set;
+ u8 resv[7];
+};
+
+#endif /* __BFA_DEFS_AUTH_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_BOOT_H__
+#define __BFA_DEFS_BOOT_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_pport.h>
+
+enum {
+ BFA_BOOT_BOOTLUN_MAX = 4, /* maximum boot lun per IOC */
+};
+
+#define BOOT_CFG_REV1 1
+
+/**
+ * Boot options setting. Boot options setting determines from where
+ * to get the boot lun information
+ */
+enum bfa_boot_bootopt {
+ BFA_BOOT_AUTO_DISCOVER = 0, /* Boot from blun provided by fabric */
+ BFA_BOOT_STORED_BLUN = 1, /* Boot from bluns stored in flash */
+ BFA_BOOT_FIRST_LUN = 2, /* Boot from first discovered blun */
+};
+
+/**
+ * Boot lun information.
+ */
+struct bfa_boot_bootlun_s {
+ wwn_t pwwn; /* port wwn of target */
+ lun_t lun; /* 64-bit lun */
+};
+
+/**
+ * BOOT boot configuraton
+ */
+struct bfa_boot_cfg_s {
+ u8 version;
+ u8 rsvd1;
+ u16 chksum;
+
+ u8 enable; /* enable/disable SAN boot */
+ u8 speed; /* boot speed settings */
+ u8 topology; /* boot topology setting */
+ u8 bootopt; /* bfa_boot_bootopt_t */
+
+ u32 nbluns; /* number of boot luns */
+
+ u32 rsvd2;
+
+ struct bfa_boot_bootlun_s blun[BFA_BOOT_BOOTLUN_MAX];
+ struct bfa_boot_bootlun_s blun_disc[BFA_BOOT_BOOTLUN_MAX];
+};
+
+
+#endif /* __BFA_DEFS_BOOT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * bfa_defs_cee.h Interface declarations between host based
+ * BFAL and DCBX/LLDP module in Firmware
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_CEE_H__
+#define __BFA_DEFS_CEE_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_pport.h>
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+#define BFA_CEE_LLDP_MAX_STRING_LEN (128)
+
+
+/* FIXME: this is coming from the protocol spec. Can the host & apps share the
+ protocol .h files ?
+ */
+#define BFA_CEE_LLDP_SYS_CAP_OTHER 0x0001
+#define BFA_CEE_LLDP_SYS_CAP_REPEATER 0x0002
+#define BFA_CEE_LLDP_SYS_CAP_MAC_BRIDGE 0x0004
+#define BFA_CEE_LLDP_SYS_CAP_WLAN_AP 0x0008
+#define BFA_CEE_LLDP_SYS_CAP_ROUTER 0x0010
+#define BFA_CEE_LLDP_SYS_CAP_TELEPHONE 0x0020
+#define BFA_CEE_LLDP_SYS_CAP_DOCSIS_CD 0x0040
+#define BFA_CEE_LLDP_SYS_CAP_STATION 0x0080
+#define BFA_CEE_LLDP_SYS_CAP_CVLAN 0x0100
+#define BFA_CEE_LLDP_SYS_CAP_SVLAN 0x0200
+#define BFA_CEE_LLDP_SYS_CAP_TPMR 0x0400
+
+
+/* LLDP string type */
+struct bfa_cee_lldp_str_s {
+ u8 sub_type;
+ u8 len;
+ u8 rsvd[2];
+ u8 value[BFA_CEE_LLDP_MAX_STRING_LEN];
+};
+
+
+/* LLDP paramters */
+struct bfa_cee_lldp_cfg_s {
+ struct bfa_cee_lldp_str_s chassis_id;
+ struct bfa_cee_lldp_str_s port_id;
+ struct bfa_cee_lldp_str_s port_desc;
+ struct bfa_cee_lldp_str_s sys_name;
+ struct bfa_cee_lldp_str_s sys_desc;
+ struct bfa_cee_lldp_str_s mgmt_addr;
+ u16 time_to_interval;
+ u16 enabled_system_cap;
+};
+
+enum bfa_cee_dcbx_version_e {
+ DCBX_PROTOCOL_PRECEE = 1,
+ DCBX_PROTOCOL_CEE = 2,
+};
+
+enum bfa_cee_lls_e {
+ CEE_LLS_DOWN_NO_TLV = 0, /* LLS is down because the TLV not sent by
+ * the peer */
+ CEE_LLS_DOWN = 1, /* LLS is down as advertised by the peer */
+ CEE_LLS_UP = 2,
+};
+
+/* CEE/DCBX parameters */
+struct bfa_cee_dcbx_cfg_s {
+ u8 pgid[8];
+ u8 pg_percentage[8];
+ u8 pfc_enabled; /* bitmap of priorties with PFC enabled */
+ u8 fcoe_user_priority; /* bitmap of priorities used for FcoE
+ * traffic */
+ u8 dcbx_version; /* operating version:CEE or preCEE */
+ u8 lls_fcoe; /* FCoE Logical Link Status */
+ u8 lls_lan; /* LAN Logical Link Status */
+ u8 rsvd[3];
+};
+
+/* CEE status */
+/* Making this to tri-state for the benefit of port list command */
+enum bfa_cee_status_e {
+ CEE_PHY_DOWN = 0,
+ CEE_PHY_UP = 1,
+ CEE_UP = 2,
+};
+
+/* CEE Query */
+struct bfa_cee_attr_s {
+ u8 cee_status;
+ u8 error_reason;
+ struct bfa_cee_lldp_cfg_s lldp_remote;
+ struct bfa_cee_dcbx_cfg_s dcbx_remote;
+ mac_t src_mac;
+ u8 link_speed;
+ u8 filler[3];
+};
+
+
+
+
+/* LLDP/DCBX/CEE Statistics */
+
+struct bfa_cee_lldp_stats_s {
+ u32 frames_transmitted;
+ u32 frames_aged_out;
+ u32 frames_discarded;
+ u32 frames_in_error;
+ u32 frames_rcvd;
+ u32 tlvs_discarded;
+ u32 tlvs_unrecognized;
+};
+
+struct bfa_cee_dcbx_stats_s {
+ u32 subtlvs_unrecognized;
+ u32 negotiation_failed;
+ u32 remote_cfg_changed;
+ u32 tlvs_received;
+ u32 tlvs_invalid;
+ u32 seqno;
+ u32 ackno;
+ u32 recvd_seqno;
+ u32 recvd_ackno;
+};
+
+struct bfa_cee_cfg_stats_s {
+ u32 cee_status_down;
+ u32 cee_status_up;
+ u32 cee_hw_cfg_changed;
+ u32 recvd_invalid_cfg;
+};
+
+
+struct bfa_cee_stats_s {
+ struct bfa_cee_lldp_stats_s lldp_stats;
+ struct bfa_cee_dcbx_stats_s dcbx_stats;
+ struct bfa_cee_cfg_stats_s cfg_stats;
+};
+
+#pragma pack()
+
+
+#endif /* __BFA_DEFS_CEE_H__ */
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_DRIVER_H__
+#define __BFA_DEFS_DRIVER_H__
+
+/**
+ * Driver statistics
+ */
+ u16 tm_io_abort;
+ u16 tm_io_abort_comp;
+ u16 tm_lun_reset;
+ u16 tm_lun_reset_comp;
+ u16 tm_target_reset;
+ u16 tm_bus_reset;
+ u16 ioc_restart; /* IOC restart count */
+ u16 io_pending; /* outstanding io count per-IOC */
+ u64 control_req;
+ u64 input_req;
+ u64 output_req;
+ u64 input_words;
+ u64 output_words;
+} bfa_driver_stats_t;
+
+
+#endif /* __BFA_DEFS_DRIVER_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_ETHPORT_H__
+#define __BFA_DEFS_ETHPORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <protocol/types.h>
+#include <cna/pstats/phyport_defs.h>
+#include <cna/pstats/ethport_defs.h>
+
+struct bna_tx_info_s {
+ u32 miniport_state;
+ u32 adapter_state;
+ u64 tx_count;
+ u64 tx_wi;
+ u64 tx_sg;
+ u64 tx_tcp_chksum;
+ u64 tx_udp_chksum;
+ u64 tx_ip_chksum;
+ u64 tx_lsov1;
+ u64 tx_lsov2;
+ u64 tx_max_sg_len ;
+};
+
+struct bna_rx_queue_info_s {
+ u16 q_id ;
+ u16 buf_size ;
+ u16 buf_count ;
+ u16 rsvd ;
+ u64 rx_count ;
+ u64 rx_dropped ;
+ u64 rx_unsupported ;
+ u64 rx_internal_err ;
+ u64 rss_count ;
+ u64 vlan_count ;
+ u64 rx_tcp_chksum ;
+ u64 rx_udp_chksum ;
+ u64 rx_ip_chksum ;
+ u64 rx_hds ;
+};
+
+struct bna_rx_q_set_s {
+ u16 q_set_type;
+ u32 miniport_state;
+ u32 adapter_state;
+ struct bna_rx_queue_info_s rx_queue[2];
+};
+
+struct bna_port_stats_s {
+ struct bna_tx_info_s tx_stats;
+ u16 qset_count ;
+ struct bna_rx_q_set_s rx_qset[8];
+};
+
+struct bfa_ethport_stats_s {
+ struct bna_stats_txf txf_stats[1];
+ struct bna_stats_rxf rxf_stats[1];
+ struct bnad_drv_stats drv_stats;
+};
+
+/**
+ * Ethernet port events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ETH_LINKUP: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_LINKDOWN: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_ENABLE: [in]: mac [out]: mac
+ * BFA_PORT_AEN_ETH_DISABLE: [in]: mac [out]: mac
+ *
+ */
+enum bfa_ethport_aen_event {
+ BFA_ETHPORT_AEN_LINKUP = 1, /* Base Port Ethernet link up event */
+ BFA_ETHPORT_AEN_LINKDOWN = 2, /* Base Port Ethernet link down event */
+ BFA_ETHPORT_AEN_ENABLE = 3, /* Base Port Ethernet link enable event */
+ BFA_ETHPORT_AEN_DISABLE = 4, /* Base Port Ethernet link disable
+ * event */
+};
+
+struct bfa_ethport_aen_data_s {
+ mac_t mac; /* MAC address of the physical port */
+};
+
+
+#endif /* __BFA_DEFS_ETHPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_FCPIM_H__
+#define __BFA_DEFS_FCPIM_H__
+
+struct bfa_fcpim_stats_s {
+ u32 total_ios; /* Total IO count */
+ u32 qresumes; /* IO waiting for CQ space */
+ u32 no_iotags; /* NO IO contexts */
+ u32 io_aborts; /* IO abort requests */
+ u32 no_tskims; /* NO task management contexts */
+ u32 iocomp_ok; /* IO completions with OK status */
+ u32 iocomp_underrun; /* IO underrun (good) */
+ u32 iocomp_overrun; /* IO overrun (good) */
+ u32 iocomp_aborted; /* Aborted IO requests */
+ u32 iocomp_timedout; /* IO timeouts */
+ u32 iocom_nexus_abort; /* IO selection timeouts */
+ u32 iocom_proto_err; /* IO protocol errors */
+ u32 iocom_dif_err; /* IO SBC-3 protection errors */
+ u32 iocom_tm_abort; /* IO aborted by TM requests */
+ u32 iocom_sqer_needed; /* IO retry for SQ error
+ *recovery */
+ u32 iocom_res_free; /* Delayed freeing of IO resources */
+ u32 iocomp_scsierr; /* IO with non-good SCSI status */
+ u32 iocom_hostabrts; /* Host IO abort requests */
+ u32 iocom_utags; /* IO comp with unknown tags */
+ u32 io_cleanups; /* IO implicitly aborted */
+ u32 io_tmaborts; /* IO aborted due to TM commands */
+ u32 rsvd;
+};
+#endif /*__BFA_DEFS_FCPIM_H__*/
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IM_COMMON_H__
+#define __BFA_DEFS_IM_COMMON_H__
+
+#define BFA_ADAPTER_NAME_LEN 256
+#define BFA_ADAPTER_GUID_LEN 256
+#define RESERVED_VLAN_NAME L"PORT VLAN"
+#define PASSTHRU_VLAN_NAME L"PASSTHRU VLAN"
+
+ u64 tx_pkt_cnt;
+ u64 rx_pkt_cnt;
+ u32 duration;
+ u8 status;
+} bfa_im_stats_t, *pbfa_im_stats_t;
+
+#endif /* __BFA_DEFS_IM_COMMON_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IM_TEAM_H__
+#define __BFA_DEFS_IM_TEAM_H__
+
+#include <protocol/types.h>
+
+#define BFA_TEAM_MAX_PORTS 8
+#define BFA_TEAM_NAME_LEN 256
+#define BFA_MAX_NUM_TEAMS 16
+#define BFA_TEAM_INVALID_DELAY -1
+
+ BFA_LACP_RATE_SLOW = 1,
+ BFA_LACP_RATE_FAST
+} bfa_im_lacp_rate_t;
+
+ BFA_TEAM_MODE_FAIL_OVER = 1,
+ BFA_TEAM_MODE_FAIL_BACK,
+ BFA_TEAM_MODE_LACP,
+ BFA_TEAM_MODE_NONE
+} bfa_im_team_mode_t;
+
+ BFA_XMIT_POLICY_L2 = 1,
+ BFA_XMIT_POLICY_L3_L4
+} bfa_im_xmit_policy_t;
+
+ bfa_im_team_mode_t team_mode;
+ bfa_im_lacp_rate_t lacp_rate;
+ bfa_im_xmit_policy_t xmit_policy;
+ int delay;
+ wchar_t primary[BFA_ADAPTER_NAME_LEN];
+ wchar_t preferred_primary[BFA_ADAPTER_NAME_LEN];
+ mac_t mac;
+ u16 num_ports;
+ u16 num_vlans;
+ u16 vlan_list[BFA_MAX_VLANS_PER_PORT];
+ wchar_t team_guid_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_GUID_LEN];
+ wchar_t ioc_name_list[BFA_TEAM_MAX_PORTS][BFA_ADAPTER_NAME_LEN];
+} bfa_im_team_attr_t;
+
+ wchar_t team_name[BFA_TEAM_NAME_LEN];
+ bfa_im_xmit_policy_t xmit_policy;
+ int delay;
+ wchar_t primary[BFA_ADAPTER_NAME_LEN];
+ wchar_t preferred_primary[BFA_ADAPTER_NAME_LEN];
+} bfa_im_team_edit_t, *pbfa_im_team_edit_t;
+
+ wchar_t team_name[BFA_TEAM_NAME_LEN];
+ bfa_im_team_mode_t team_mode;
+ mac_t mac;
+} bfa_im_team_info_t;
+
+ bfa_im_team_info_t team_info[BFA_MAX_NUM_TEAMS];
+ u16 num_teams;
+} bfa_im_team_list_t, *pbfa_im_team_list_t;
+
+#endif /* __BFA_DEFS_IM_TEAM_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IOC_H__
+#define __BFA_DEFS_IOC_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_pm.h>
+
+enum {
+ BFA_IOC_DRIVER_LEN = 16,
+ BFA_IOC_CHIP_REV_LEN = 8,
+};
+
+/**
+ * Driver and firmware versions.
+ */
+struct bfa_ioc_driver_attr_s {
+ char driver[BFA_IOC_DRIVER_LEN]; /* driver name */
+ char driver_ver[BFA_VERSION_LEN]; /* driver version */
+ char fw_ver[BFA_VERSION_LEN]; /* firmware version*/
+ char bios_ver[BFA_VERSION_LEN]; /* bios version */
+ char efi_ver[BFA_VERSION_LEN]; /* EFI version */
+ char ob_ver[BFA_VERSION_LEN]; /* openboot version*/
+};
+
+/**
+ * IOC PCI device attributes
+ */
+struct bfa_ioc_pci_attr_s {
+ u16 vendor_id; /* PCI vendor ID */
+ u16 device_id; /* PCI device ID */
+ u16 ssid; /* subsystem ID */
+ u16 ssvid; /* subsystem vendor ID */
+ u32 pcifn; /* PCI device function */
+ u32 rsvd; /* padding */
+ u8 chip_rev[BFA_IOC_CHIP_REV_LEN]; /* chip revision */
+};
+
+/**
+ * IOC states
+ */
+enum bfa_ioc_state {
+ BFA_IOC_RESET = 1, /* IOC is in reset state */
+ BFA_IOC_SEMWAIT = 2, /* Waiting for IOC hardware semaphore */
+ BFA_IOC_HWINIT = 3, /* IOC hardware is being initialized */
+ BFA_IOC_GETATTR = 4, /* IOC is being configured */
+ BFA_IOC_OPERATIONAL = 5, /* IOC is operational */
+ BFA_IOC_INITFAIL = 6, /* IOC hardware failure */
+ BFA_IOC_HBFAIL = 7, /* IOC heart-beat failure */
+ BFA_IOC_DISABLING = 8, /* IOC is being disabled */
+ BFA_IOC_DISABLED = 9, /* IOC is disabled */
+ BFA_IOC_FWMISMATCH = 10, /* IOC firmware different from drivers */
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_ioc_stats_s {
+ u32 hb_count;
+ u32 cfg_reqs;
+ u32 enable_reqs;
+ u32 disable_reqs;
+ u32 stats_reqs;
+ u32 clrstats_reqs;
+ u32 unknown_reqs;
+ u32 ic_reqs; /* interrupt coalesce reqs */
+};
+
+/**
+ * IOC driver stats
+ */
+struct bfa_ioc_drv_stats_s {
+ u32 ioc_isrs;
+ u32 ioc_enables;
+ u32 ioc_disables;
+ u32 ioc_hbfails;
+ u32 ioc_boots;
+ u32 stats_tmos;
+ u32 hb_count;
+ u32 disable_reqs;
+ u32 enable_reqs;
+ u32 disable_replies;
+ u32 enable_replies;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_ioc_stats_s {
+ struct bfa_ioc_drv_stats_s drv_stats; /* driver IOC stats */
+ struct bfa_fw_ioc_stats_s fw_stats; /* firmware IOC stats */
+};
+
+
+enum bfa_ioc_type_e {
+ BFA_IOC_TYPE_FC = 1,
+ BFA_IOC_TYPE_FCoE = 2,
+ BFA_IOC_TYPE_LL = 3,
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_ioc_attr_s {
+ enum bfa_ioc_type_e ioc_type;
+ enum bfa_ioc_state state; /* IOC state */
+ struct bfa_adapter_attr_s adapter_attr; /* HBA attributes */
+ struct bfa_ioc_driver_attr_s driver_attr; /* driver attr */
+ struct bfa_ioc_pci_attr_s pci_attr;
+ u8 port_id; /* port number */
+};
+
+/**
+ * BFA IOC level events
+ */
+enum bfa_ioc_aen_event {
+ BFA_IOC_AEN_HBGOOD = 1, /* Heart Beat restore event */
+ BFA_IOC_AEN_HBFAIL = 2, /* Heart Beat failure event */
+ BFA_IOC_AEN_ENABLE = 3, /* IOC enabled event */
+ BFA_IOC_AEN_DISABLE = 4, /* IOC disabled event */
+ BFA_IOC_AEN_FWMISMATCH = 5, /* IOC firmware mismatch */
+};
+
+/**
+ * BFA IOC level event data, now just a place holder
+ */
+struct bfa_ioc_aen_data_s {
+ enum bfa_ioc_type_e ioc_type;
+ wwn_t pwwn;
+ mac_t mac;
+};
+
+#endif /* __BFA_DEFS_IOC_H__ */
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_IOCFC_H__
+#define __BFA_DEFS_IOCFC_H__
+
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_version.h>
+#include <defs/bfa_defs_adapter.h>
+#include <defs/bfa_defs_pm.h>
+
+#define BFA_IOCFC_INTR_DELAY 1125
+#define BFA_IOCFC_INTR_LATENCY 225
+
+/**
+ * Interrupt coalescing configuration.
+ */
+struct bfa_iocfc_intr_attr_s {
+ bfa_boolean_t coalesce; /* enable/disable coalescing */
+ u16 latency; /* latency in microseconds */
+ u16 delay; /* delay in microseconds */
+};
+
+/**
+ * IOC firmware configuraton
+ */
+struct bfa_iocfc_fwcfg_s {
+ u16 num_fabrics; /* number of fabrics */
+ u16 num_lports; /* number of local lports */
+ u16 num_rports; /* number of remote ports */
+ u16 num_ioim_reqs; /* number of IO reqs */
+ u16 num_tskim_reqs; /* task management requests */
+ u16 num_iotm_reqs; /* number of TM IO reqs */
+ u16 num_tsktm_reqs; /* TM task management requests*/
+ u16 num_fcxp_reqs; /* unassisted FC exchanges */
+ u16 num_uf_bufs; /* unsolicited recv buffers */
+ u8 num_cqs;
+ u8 rsvd;
+};
+
+struct bfa_iocfc_drvcfg_s {
+ u16 num_reqq_elems; /* number of req queue elements */
+ u16 num_rspq_elems; /* number of rsp queue elements */
+ u16 num_sgpgs; /* number of total SG pages */
+ u16 num_sboot_tgts; /* number of SAN boot targets */
+ u16 num_sboot_luns; /* number of SAN boot luns */
+ u16 ioc_recover; /* IOC recovery mode */
+ u16 min_cfg; /* minimum configuration */
+ u16 path_tov; /* device path timeout */
+ bfa_boolean_t delay_comp; /* delay completion of
+ failed inflight IOs */
+ u32 rsvd;
+};
+/**
+ * IOC configuration
+ */
+struct bfa_iocfc_cfg_s {
+ struct bfa_iocfc_fwcfg_s fwcfg; /* firmware side config */
+ struct bfa_iocfc_drvcfg_s drvcfg; /* driver side config */
+};
+
+/**
+ * IOC firmware IO stats
+ */
+struct bfa_fw_io_stats_s {
+ u32 host_abort; /* IO aborted by host driver*/
+ u32 host_cleanup; /* IO clean up by host driver */
+
+ u32 fw_io_timeout; /* IOs timedout */
+ u32 fw_frm_parse; /* frame parsed by f/w */
+ u32 fw_frm_data; /* fcp_data frame parsed by f/w */
+ u32 fw_frm_rsp; /* fcp_rsp frame parsed by f/w */
+ u32 fw_frm_xfer_rdy; /* xfer_rdy frame parsed by f/w */
+ u32 fw_frm_bls_acc; /* BLS ACC frame parsed by f/w */
+ u32 fw_frm_tgt_abort; /* target ABTS parsed by f/w */
+ u32 fw_frm_unknown; /* unknown parsed by f/w */
+ u32 fw_data_dma; /* f/w DMA'ed the data frame */
+ u32 fw_frm_drop; /* f/w drop the frame */
+
+ u32 rec_timeout; /* FW rec timed out */
+ u32 error_rec; /* FW sending rec on
+ * an error condition*/
+ u32 wait_for_si; /* FW wait for SI */
+ u32 rec_rsp_inval; /* REC rsp invalid */
+ u32 seqr_io_abort; /* target does not know cmd so abort */
+ u32 seqr_io_retry; /* SEQR failed so retry IO */
+
+ u32 itn_cisc_upd_rsp; /* ITN cisc updated on fcp_rsp */
+ u32 itn_cisc_upd_data; /* ITN cisc updated on fcp_data */
+ u32 itn_cisc_upd_xfer_rdy; /* ITN cisc updated on fcp_data */
+
+ u32 fcp_data_lost; /* fcp data lost */
+
+ u32 ro_set_in_xfer_rdy; /* Target set RO in Xfer_rdy frame */
+ u32 xfer_rdy_ooo_err; /* Out of order Xfer_rdy received */
+ u32 xfer_rdy_unknown_err; /* unknown error in xfer_rdy frame */
+
+ u32 io_abort_timeout; /* ABTS timedout */
+ u32 sler_initiated; /* SLER initiated */
+
+ u32 unexp_fcp_rsp; /* fcp response in wrong state */
+
+ u32 fcp_rsp_under_run; /* fcp rsp IO underrun */
+ u32 fcp_rsp_under_run_wr; /* fcp rsp IO underrun for write */
+ u32 fcp_rsp_under_run_err; /* fcp rsp IO underrun error */
+ u32 fcp_rsp_resid_inval; /* invalid residue */
+ u32 fcp_rsp_over_run; /* fcp rsp IO overrun */
+ u32 fcp_rsp_over_run_err; /* fcp rsp IO overrun error */
+ u32 fcp_rsp_proto_err; /* protocol error in fcp rsp */
+ u32 fcp_rsp_sense_err; /* error in sense info in fcp rsp */
+ u32 fcp_conf_req; /* FCP conf requested */
+
+ u32 tgt_aborted_io; /* target initiated abort */
+
+ u32 ioh_edtov_timeout_event;/* IOH edtov timer popped */
+ u32 ioh_fcp_rsp_excp_event; /* IOH FCP_RSP exception */
+ u32 ioh_fcp_conf_event; /* IOH FCP_CONF */
+ u32 ioh_mult_frm_rsp_event; /* IOH multi_frame FCP_RSP */
+ u32 ioh_hit_class2_event; /* IOH hit class2 */
+ u32 ioh_miss_other_event; /* IOH miss other */
+ u32 ioh_seq_cnt_err_event; /* IOH seq cnt error */
+ u32 ioh_len_err_event; /* IOH len error - fcp_dl !=
+ * bytes xfered */
+ u32 ioh_seq_len_err_event; /* IOH seq len error */
+ u32 ioh_data_oor_event; /* Data out of range */
+ u32 ioh_ro_ooo_event; /* Relative offset out of range */
+ u32 ioh_cpu_owned_event; /* IOH hit -iost owned by f/w */
+ u32 ioh_unexp_frame_event; /* unexpected frame recieved
+ * count */
+ u32 ioh_err_int; /* IOH error int during data-phase
+ * for scsi write
+ */
+};
+
+/**
+ * IOC port firmware stats
+ */
+
+struct bfa_fw_port_fpg_stats_s {
+ u32 intr_evt;
+ u32 intr;
+ u32 intr_excess;
+ u32 intr_cause0;
+ u32 intr_other;
+ u32 intr_other_ign;
+ u32 sig_lost;
+ u32 sig_regained;
+ u32 sync_lost;
+ u32 sync_to;
+ u32 sync_regained;
+ u32 div2_overflow;
+ u32 div2_underflow;
+ u32 efifo_overflow;
+ u32 efifo_underflow;
+ u32 idle_rx;
+ u32 lrr_rx;
+ u32 lr_rx;
+ u32 ols_rx;
+ u32 nos_rx;
+ u32 lip_rx;
+ u32 arbf0_rx;
+ u32 mrk_rx;
+ u32 const_mrk_rx;
+ u32 prim_unknown;
+ u32 rsvd;
+};
+
+
+struct bfa_fw_port_lksm_stats_s {
+ u32 hwsm_success; /* hwsm state machine success */
+ u32 hwsm_fails; /* hwsm fails */
+ u32 hwsm_wdtov; /* hwsm timed out */
+ u32 swsm_success; /* swsm success */
+ u32 swsm_fails; /* swsm fails */
+ u32 swsm_wdtov; /* swsm timed out */
+ u32 busybufs; /* link init failed due to busybuf */
+ u32 buf_waits; /* bufwait state entries */
+ u32 link_fails; /* link failures */
+ u32 psp_errors; /* primitive sequence protocol errors */
+ u32 lr_unexp; /* No. of times LR rx-ed unexpectedly */
+ u32 lrr_unexp; /* No. of times LRR rx-ed unexpectedly */
+ u32 lr_tx; /* No. of times LR tx started */
+ u32 lrr_tx; /* No. of times LRR tx started */
+ u32 ols_tx; /* No. of times OLS tx started */
+ u32 nos_tx; /* No. of times NOS tx started */
+};
+
+
+struct bfa_fw_port_snsm_stats_s {
+ u32 hwsm_success; /* Successful hwsm terminations */
+ u32 hwsm_fails; /* hwsm fail count */
+ u32 hwsm_wdtov; /* hwsm timed out */
+ u32 swsm_success; /* swsm success */
+ u32 swsm_wdtov; /* swsm timed out */
+ u32 error_resets; /* error resets initiated by upsm */
+ u32 sync_lost; /* Sync loss count */
+ u32 sig_lost; /* Signal loss count */
+};
+
+
+struct bfa_fw_port_physm_stats_s {
+ u32 module_inserts; /* Module insert count */
+ u32 module_xtracts; /* Module extracts count */
+ u32 module_invalids; /* Invalid module inserted count */
+ u32 module_read_ign; /* Module validation status ignored */
+ u32 laser_faults; /* Laser fault count */
+ u32 rsvd;
+};
+
+
+struct bfa_fw_fip_stats_s {
+ u32 disc_req; /* Discovery solicit requests */
+ u32 disc_rsp; /* Discovery solicit response */
+ u32 disc_err; /* Discovery advt. parse errors */
+ u32 disc_unsol; /* Discovery unsolicited */
+ u32 disc_timeouts; /* Discovery timeouts */
+ u32 linksvc_unsupp; /* Unsupported link service req */
+ u32 linksvc_err; /* Parse error in link service req */
+ u32 logo_req; /* Number of FIP logos received */
+ u32 clrvlink_req; /* Clear virtual link req */
+ u32 op_unsupp; /* Unsupported FIP operation */
+ u32 untagged; /* Untagged frames (ignored) */
+ u32 rsvd;
+};
+
+
+struct bfa_fw_lps_stats_s {
+ u32 mac_invalids; /* Invalid mac assigned */
+ u32 rsvd;
+};
+
+
+struct bfa_fw_fcoe_stats_s {
+ u32 cee_linkups; /* CEE link up count */
+ u32 cee_linkdns; /* CEE link down count */
+ u32 fip_linkups; /* FIP link up count */
+ u32 fip_linkdns; /* FIP link up count */
+ u32 fip_fails; /* FIP fail count */
+ u32 mac_invalids; /* Invalid mac assigned */
+};
+
+/**
+ * IOC firmware FCoE port stats
+ */
+struct bfa_fw_fcoe_port_stats_s {
+ struct bfa_fw_fcoe_stats_s fcoe_stats;
+ struct bfa_fw_fip_stats_s fip_stats;
+};
+
+/**
+ * IOC firmware FC port stats
+ */
+struct bfa_fw_fc_port_stats_s {
+ struct bfa_fw_port_fpg_stats_s fpg_stats;
+ struct bfa_fw_port_physm_stats_s physm_stats;
+ struct bfa_fw_port_snsm_stats_s snsm_stats;
+ struct bfa_fw_port_lksm_stats_s lksm_stats;
+};
+
+/**
+ * IOC firmware FC port stats
+ */
+union bfa_fw_port_stats_s {
+ struct bfa_fw_fc_port_stats_s fc_stats;
+ struct bfa_fw_fcoe_port_stats_s fcoe_stats;
+};
+
+/**
+ * IOC firmware stats
+ */
+struct bfa_fw_stats_s {
+ struct bfa_fw_ioc_stats_s ioc_stats;
+ struct bfa_fw_io_stats_s io_stats;
+ union bfa_fw_port_stats_s port_stats;
+};
+
+/**
+ * IOC statistics
+ */
+struct bfa_iocfc_stats_s {
+ struct bfa_fw_stats_s fw_stats; /* firmware IOC stats */
+};
+
+/**
+ * IOC attributes returned in queries
+ */
+struct bfa_iocfc_attr_s {
+ struct bfa_iocfc_cfg_s config; /* IOCFC config */
+ struct bfa_iocfc_intr_attr_s intr_attr; /* interrupt attr */
+};
+
+#define BFA_IOCFC_PATHTOV_MAX 60
+#define BFA_IOCFC_QDEPTH_MAX 2000
+
+#endif /* __BFA_DEFS_IOC_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_IPFC_H__
+#define __BFA_DEFS_IPFC_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * FCS ip remote port states
+ */
+enum bfa_iprp_state {
+ BFA_IPRP_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_IPRP_ONLINE = 1, /* process login is complete */
+ BFA_IPRP_OFFLINE = 2, /* iprp is offline */
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_iprp_stats_s {
+ u32 offlines;
+ u32 onlines;
+ u32 rscns;
+ u32 plogis;
+ u32 logos;
+ u32 plogi_timeouts;
+ u32 plogi_rejects;
+};
+
+/**
+ * FCS iprp attribute returned in queries
+ */
+struct bfa_iprp_attr_s {
+ enum bfa_iprp_state state;
+};
+
+struct bfa_ipfc_stats_s {
+ u32 arp_sent;
+ u32 arp_recv;
+ u32 arp_reply_sent;
+ u32 arp_reply_recv;
+ u32 farp_sent;
+ u32 farp_recv;
+ u32 farp_reply_sent;
+ u32 farp_reply_recv;
+ u32 farp_reject_sent;
+ u32 farp_reject_recv;
+};
+
+struct bfa_ipfc_attr_s {
+ bfa_boolean_t enabled;
+};
+
+#endif /* __BFA_DEFS_IPFC_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_ITNIM_H__
+#define __BFA_DEFS_ITNIM_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+
+/**
+ * FCS itnim states
+ */
+enum bfa_itnim_state {
+ BFA_ITNIM_OFFLINE = 0, /* offline */
+ BFA_ITNIM_PRLI_SEND = 1, /* prli send */
+ BFA_ITNIM_PRLI_SENT = 2, /* prli sent */
+ BFA_ITNIM_PRLI_RETRY = 3, /* prli retry */
+ BFA_ITNIM_HCB_ONLINE = 4, /* online callback */
+ BFA_ITNIM_ONLINE = 5, /* online */
+ BFA_ITNIM_HCB_OFFLINE = 6, /* offline callback */
+ BFA_ITNIM_INITIATIOR = 7, /* initiator */
+};
+
+struct bfa_itnim_hal_stats_s {
+ u32 onlines; /* ITN nexus onlines (PRLI done) */
+ u32 offlines; /* ITN Nexus offlines */
+ u32 creates; /* ITN create requests */
+ u32 deletes; /* ITN delete requests */
+ u32 create_comps; /* ITN create completions */
+ u32 delete_comps; /* ITN delete completions */
+ u32 sler_events; /* SLER (sequence level error
+ * recovery) events */
+ u32 ioc_disabled; /* Num IOC disables */
+ u32 cleanup_comps; /* ITN cleanup completions */
+ u32 tm_cmnds; /* task management(TM) cmnds sent */
+ u32 tm_fw_rsps; /* TM cmds firmware responses */
+ u32 tm_success; /* TM successes */
+ u32 tm_failures; /* TM failures */
+ u32 tm_io_comps; /* TM IO completions */
+ u32 tm_qresumes; /* TM queue resumes (after waiting
+ * for resources)
+ */
+ u32 tm_iocdowns; /* TM cmnds affected by IOC down */
+ u32 tm_cleanups; /* TM cleanups */
+ u32 tm_cleanup_comps;
+ /* TM cleanup completions */
+ u32 ios; /* IO requests */
+ u32 io_comps; /* IO completions */
+ u64 input_reqs; /* INPUT requests */
+ u64 output_reqs; /* OUTPUT requests */
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_itnim_stats_s {
+ u32 onlines; /* num rport online */
+ u32 offlines; /* num rport offline */
+ u32 prli_sent; /* num prli sent out */
+ u32 fcxp_alloc_wait;/* num fcxp alloc waits */
+ u32 prli_rsp_err; /* num prli rsp errors */
+ u32 prli_rsp_acc; /* num prli rsp accepts */
+ u32 initiator; /* rport is an initiator */
+ u32 prli_rsp_parse_err; /* prli rsp parsing errors */
+ u32 prli_rsp_rjt; /* num prli rsp rejects */
+ u32 timeout; /* num timeouts detected */
+ u32 sler; /* num sler notification from BFA */
+ u32 rsvd;
+ struct bfa_itnim_hal_stats_s hal_stats;
+};
+
+/**
+ * FCS itnim attributes returned in queries
+ */
+struct bfa_itnim_attr_s {
+ enum bfa_itnim_state state; /* FCS itnim state */
+ u8 retry; /* data retransmision support */
+ u8 task_retry_id; /* task retry ident support */
+ u8 rec_support; /* REC supported */
+ u8 conf_comp; /* confirmed completion supp */
+};
+
+/**
+ * BFA ITNIM events.
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_ITNIM_AEN_NEW: [in]: None [out]: vf_id, lpwwn
+ * BFA_ITNIM_AEN_DELETE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_ONLINE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_OFFLINE: [in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ * BFA_ITNIM_AEN_DISCONNECT:[in]: vf_id, lpwwn, rpwwn (0 = all fcp4 targets),
+ * [out]: vf_id, ppwwn, lpwwn, rpwwn
+ */
+enum bfa_itnim_aen_event {
+ BFA_ITNIM_AEN_ONLINE = 1, /* Target online */
+ BFA_ITNIM_AEN_OFFLINE = 2, /* Target offline */
+ BFA_ITNIM_AEN_DISCONNECT = 3, /* Target disconnected */
+};
+
+/**
+ * BFA ITNIM event data structure.
+ */
+struct bfa_itnim_aen_data_s {
+ u16 vf_id; /* vf_id of the IT nexus */
+ u16 rsvd[3];
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of logical port */
+ wwn_t rpwwn; /* WWN of remote(target) port */
+};
+
+#endif /* __BFA_DEFS_ITNIM_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_LED_H__
+#define __BFA_DEFS_LED_H__
+
+#define BFA_LED_MAX_NUM 3
+
+enum bfa_led_op {
+ BFA_LED_OFF = 0,
+ BFA_LED_ON = 1,
+ BFA_LED_FLICK = 2,
+ BFA_LED_BLINK = 3,
+};
+
+enum bfa_led_color {
+ BFA_LED_GREEN = 0,
+ BFA_LED_AMBER = 1,
+};
+
+#endif /* __BFA_DEFS_LED_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_LPORT_H__
+#define __BFA_DEFS_LPORT_H__
+
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_port.h>
+
+/**
+ * BFA AEN logical port events.
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_LPORT_AEN_NEW: [in]: None [out]: vf_id, ppwwn, lpwwn, roles
+ * BFA_LPORT_AEN_DELETE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_ONLINE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_OFFLINE: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DISCONNECT:[in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NEW_PROP: [in]: None [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DELETE_PROP: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NEW_STANDARD: [in]: None [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_DELETE_STANDARD: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_DUP_WWN: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_FABRIC_MAX: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ * BFA_LPORT_AEN_NPIV_UNKNOWN: [in]: lpwwn [out]: vf_id, ppwwn. lpwwn, roles
+ */
+enum bfa_lport_aen_event {
+ BFA_LPORT_AEN_NEW = 1, /* LPort created event */
+ BFA_LPORT_AEN_DELETE = 2, /* LPort deleted event */
+ BFA_LPORT_AEN_ONLINE = 3, /* LPort online event */
+ BFA_LPORT_AEN_OFFLINE = 4, /* LPort offline event */
+ BFA_LPORT_AEN_DISCONNECT = 5, /* LPort disconnect event */
+ BFA_LPORT_AEN_NEW_PROP = 6, /* VPort created event */
+ BFA_LPORT_AEN_DELETE_PROP = 7, /* VPort deleted event */
+ BFA_LPORT_AEN_NEW_STANDARD = 8, /* VPort created event */
+ BFA_LPORT_AEN_DELETE_STANDARD = 9, /* VPort deleted event */
+ BFA_LPORT_AEN_NPIV_DUP_WWN = 10, /* VPort configured with
+ * duplicate WWN event
+ */
+ BFA_LPORT_AEN_NPIV_FABRIC_MAX = 11, /* Max NPIV in fabric/fport */
+ BFA_LPORT_AEN_NPIV_UNKNOWN = 12, /* Unknown NPIV Error code event */
+};
+
+/**
+ * BFA AEN event data structure
+ */
+struct bfa_lport_aen_data_s {
+ u16 vf_id; /* vf_id of this logical port */
+ u16 rsvd;
+ enum bfa_port_role roles; /* Logical port mode,IM/TM/IP etc */
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of this logical port */
+};
+
+#endif /* __BFA_DEFS_LPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_MFG_H__
+#define __BFA_DEFS_MFG_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * Manufacturing block version
+ */
+#define BFA_MFG_VERSION 1
+
+/**
+ * Manufacturing block format
+ */
+#define BFA_MFG_SERIALNUM_SIZE 11
+#define BFA_MFG_PARTNUM_SIZE 14
+#define BFA_MFG_SUPPLIER_ID_SIZE 10
+#define BFA_MFG_SUPPLIER_PARTNUM_SIZE 20
+#define BFA_MFG_SUPPLIER_SERIALNUM_SIZE 20
+#define BFA_MFG_SUPPLIER_REVISION_SIZE 4
+#define STRSZ(_n) (((_n) + 4) & ~3)
+
+/**
+ * VPD data length
+ */
+#define BFA_MFG_VPD_LEN 256
+
+/**
+ * All numerical fields are in big-endian format.
+ */
+struct bfa_mfg_vpd_s {
+ u8 version; /* vpd data version */
+ u8 vpd_sig[3]; /* characters 'V', 'P', 'D' */
+ u8 chksum; /* u8 checksum */
+ u8 vendor; /* vendor */
+ u8 len; /* vpd data length excluding header */
+ u8 rsv;
+ u8 data[BFA_MFG_VPD_LEN]; /* vpd data */
+};
+
+#pragma pack(1)
+
+#endif /* __BFA_DEFS_MFG_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PCI_H__
+#define __BFA_DEFS_PCI_H__
+
+/**
+ * PCI device and vendor ID information
+ */
+enum {
+ BFA_PCI_VENDOR_ID_BROCADE = 0x1657,
+ BFA_PCI_DEVICE_ID_FC_8G2P = 0x13,
+ BFA_PCI_DEVICE_ID_FC_8G1P = 0x17,
+ BFA_PCI_DEVICE_ID_CT = 0x14,
+};
+
+/**
+ * PCI sub-system device and vendor ID information
+ */
+enum {
+ BFA_PCI_FCOE_SSDEVICE_ID = 0x14,
+};
+
+#define BFA_PCI_ACCESS_RANGES 1 /* Maximum number of device address ranges
+ * mapped through different BAR(s). */
+
+#endif /* __BFA_DEFS_PCI_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PM_H__
+#define __BFA_DEFS_PM_H__
+
+#include <bfa_os_inc.h>
+
+/**
+ * BFA power management device states
+ */
+enum bfa_pm_ds {
+ BFA_PM_DS_D0 = 0, /* full power mode */
+ BFA_PM_DS_D1 = 1, /* power save state 1 */
+ BFA_PM_DS_D2 = 2, /* power save state 2 */
+ BFA_PM_DS_D3 = 3, /* power off state */
+};
+
+#endif /* __BFA_DEFS_PM_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_POM_H__
+#define __BFA_DEFS_POM_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * POM health status levels for each attributes.
+ */
+enum bfa_pom_entry_health {
+ BFA_POM_HEALTH_NOINFO = 1, /* no information */
+ BFA_POM_HEALTH_NORMAL = 2, /* health is normal */
+ BFA_POM_HEALTH_WARNING = 3, /* warning level */
+ BFA_POM_HEALTH_ALARM = 4, /* alarming level */
+};
+
+/**
+ * Reading of temperature/voltage/current/power
+ */
+struct bfa_pom_entry_s {
+ enum bfa_pom_entry_health health; /* POM entry health */
+ u32 curr_value; /* current value */
+ u32 thr_warn_high; /* threshold warning high */
+ u32 thr_warn_low; /* threshold warning low */
+ u32 thr_alarm_low; /* threshold alaram low */
+ u32 thr_alarm_high; /* threshold alarm high */
+};
+
+/**
+ * POM attributes
+ */
+struct bfa_pom_attr_s {
+ struct bfa_pom_entry_s temperature; /* centigrade */
+ struct bfa_pom_entry_s voltage; /* volts */
+ struct bfa_pom_entry_s curr; /* milli amps */
+ struct bfa_pom_entry_s txpower; /* micro watts */
+ struct bfa_pom_entry_s rxpower; /* micro watts */
+};
+
+#endif /* __BFA_DEFS_POM_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PORT_H__
+#define __BFA_DEFS_PORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_ioc.h>
+
+#define BFA_FCS_FABRIC_IPADDR_SZ 16
+
+/**
+ * symbolic names for base port/virtual port
+ */
+#define BFA_SYMNAME_MAXLEN 128 /* vmware/windows uses 128 bytes */
+struct bfa_port_symname_s {
+ char symname[BFA_SYMNAME_MAXLEN];
+};
+
+/**
+* Roles of FCS port:
+ * - FCP IM and FCP TM roles cannot be enabled together for a FCS port
+ * - Create multiple ports if both IM and TM functions required.
+ * - Atleast one role must be specified.
+ */
+enum bfa_port_role {
+ BFA_PORT_ROLE_FCP_IM = 0x01, /* FCP initiator role */
+ BFA_PORT_ROLE_FCP_TM = 0x02, /* FCP target role */
+ BFA_PORT_ROLE_FCP_IPFC = 0x04, /* IP over FC role */
+ BFA_PORT_ROLE_FCP_MAX = BFA_PORT_ROLE_FCP_IPFC | BFA_PORT_ROLE_FCP_IM
+};
+
+/**
+ * FCS port configuration.
+ */
+struct bfa_port_cfg_s {
+ wwn_t pwwn; /* port wwn */
+ wwn_t nwwn; /* node wwn */
+ struct bfa_port_symname_s sym_name; /* vm port symbolic name */
+ enum bfa_port_role roles; /* FCS port roles */
+ u32 rsvd;
+ u8 tag[16]; /* opaque tag from application */
+};
+
+/**
+ * FCS port states
+ */
+enum bfa_port_state {
+ BFA_PORT_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_PORT_FDISC = 1, /* FDISC is in progress */
+ BFA_PORT_ONLINE = 2, /* login to fabric is complete */
+ BFA_PORT_OFFLINE = 3, /* No login to fabric */
+};
+
+/**
+ * FCS port type. Required for VmWare.
+ */
+enum bfa_port_type {
+ BFA_PORT_TYPE_PHYSICAL = 0,
+ BFA_PORT_TYPE_VIRTUAL,
+};
+
+/**
+ * FCS port offline reason. Required for VmWare.
+ */
+enum bfa_port_offline_reason {
+ BFA_PORT_OFFLINE_UNKNOWN = 0,
+ BFA_PORT_OFFLINE_LINKDOWN,
+ BFA_PORT_OFFLINE_FAB_UNSUPPORTED, /* NPIV not supported by the
+ * fabric */
+ BFA_PORT_OFFLINE_FAB_NORESOURCES,
+ BFA_PORT_OFFLINE_FAB_LOGOUT,
+};
+
+/**
+ * FCS lport info. Required for VmWare.
+ */
+struct bfa_port_info_s {
+ u8 port_type; /* bfa_port_type_t : physical or
+ * virtual */
+ u8 port_state; /* one of bfa_port_state values */
+ u8 offline_reason; /* one of bfa_port_offline_reason_t
+ * values */
+ wwn_t port_wwn;
+ wwn_t node_wwn;
+
+ /*
+ * following 4 feilds are valid for Physical Ports only
+ */
+ u32 max_vports_supp; /* Max supported vports */
+ u32 num_vports_inuse; /* Num of in use vports */
+ u32 max_rports_supp; /* Max supported rports */
+ u32 num_rports_inuse; /* Num of doscovered rports */
+
+};
+
+/**
+ * FCS port statistics
+ */
+struct bfa_port_stats_s {
+ u32 ns_plogi_sent;
+ u32 ns_plogi_rsp_err;
+ u32 ns_plogi_acc_err;
+ u32 ns_plogi_accepts;
+ u32 ns_rejects; /* NS command rejects */
+ u32 ns_plogi_unknown_rsp;
+ u32 ns_plogi_alloc_wait;
+
+ u32 ns_retries; /* NS command retries */
+ u32 ns_timeouts; /* NS command timeouts */
+
+ u32 ns_rspnid_sent;
+ u32 ns_rspnid_accepts;
+ u32 ns_rspnid_rsp_err;
+ u32 ns_rspnid_rejects;
+ u32 ns_rspnid_alloc_wait;
+
+ u32 ns_rftid_sent;
+ u32 ns_rftid_accepts;
+ u32 ns_rftid_rsp_err;
+ u32 ns_rftid_rejects;
+ u32 ns_rftid_alloc_wait;
+
+ u32 ns_rffid_sent;
+ u32 ns_rffid_accepts;
+ u32 ns_rffid_rsp_err;
+ u32 ns_rffid_rejects;
+ u32 ns_rffid_alloc_wait;
+
+ u32 ns_gidft_sent;
+ u32 ns_gidft_accepts;
+ u32 ns_gidft_rsp_err;
+ u32 ns_gidft_rejects;
+ u32 ns_gidft_unknown_rsp;
+ u32 ns_gidft_alloc_wait;
+
+ /*
+ * Mgmt Server stats
+ */
+ u32 ms_retries; /* MS command retries */
+ u32 ms_timeouts; /* MS command timeouts */
+ u32 ms_plogi_sent;
+ u32 ms_plogi_rsp_err;
+ u32 ms_plogi_acc_err;
+ u32 ms_plogi_accepts;
+ u32 ms_rejects; /* NS command rejects */
+ u32 ms_plogi_unknown_rsp;
+ u32 ms_plogi_alloc_wait;
+
+ u32 num_rscn; /* Num of RSCN received */
+ u32 num_portid_rscn;/* Num portid format RSCN
+ * received */
+
+ u32 uf_recvs; /* unsolicited recv frames */
+ u32 uf_recv_drops; /* dropped received frames */
+
+ u32 rsvd; /* padding for 64 bit alignment */
+};
+
+/**
+ * BFA port attribute returned in queries
+ */
+struct bfa_port_attr_s {
+ enum bfa_port_state state; /* port state */
+ u32 pid; /* port ID */
+ struct bfa_port_cfg_s port_cfg; /* port configuration */
+ enum bfa_pport_type port_type; /* current topology */
+ u32 loopback; /* cable is externally looped back */
+ wwn_t fabric_name; /* attached switch's nwwn */
+ u8 fabric_ip_addr[BFA_FCS_FABRIC_IPADDR_SZ]; /* attached
+ * fabric's ip addr */
+};
+
+/**
+ * BFA physical port Level events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_PORT_AEN_ONLINE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_OFFLINE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_RLIR: [in]: None [out]: pwwn, rlir_data, rlir_len
+ * BFA_PORT_AEN_SFP_INSERT: [in]: pwwn [out]: port_id, pwwn
+ * BFA_PORT_AEN_SFP_REMOVE: [in]: pwwn [out]: port_id, pwwn
+ * BFA_PORT_AEN_SFP_POM: [in]: pwwn [out]: level, port_id, pwwn
+ * BFA_PORT_AEN_ENABLE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_DISABLE: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_AUTH_ON: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_AUTH_OFF: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_DISCONNECT: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_QOS_NEG: [in]: pwwn [out]: pwwn
+ * BFA_PORT_AEN_FABRIC_NAME_CHANGE: [in]: pwwn, [out]: pwwn, fwwn
+ *
+ */
+enum bfa_port_aen_event {
+ BFA_PORT_AEN_ONLINE = 1, /* Physical Port online event */
+ BFA_PORT_AEN_OFFLINE = 2, /* Physical Port offline event */
+ BFA_PORT_AEN_RLIR = 3, /* RLIR event, not supported */
+ BFA_PORT_AEN_SFP_INSERT = 4, /* SFP inserted event */
+ BFA_PORT_AEN_SFP_REMOVE = 5, /* SFP removed event */
+ BFA_PORT_AEN_SFP_POM = 6, /* SFP POM event */
+ BFA_PORT_AEN_ENABLE = 7, /* Physical Port enable event */
+ BFA_PORT_AEN_DISABLE = 8, /* Physical Port disable event */
+ BFA_PORT_AEN_AUTH_ON = 9, /* Physical Port auth success event */
+ BFA_PORT_AEN_AUTH_OFF = 10, /* Physical Port auth fail event */
+ BFA_PORT_AEN_DISCONNECT = 11, /* Physical Port disconnect event */
+ BFA_PORT_AEN_QOS_NEG = 12, /* Base Port QOS negotiation event */
+ BFA_PORT_AEN_FABRIC_NAME_CHANGE = 13, /* Fabric Name/WWN change
+ * event */
+ BFA_PORT_AEN_SFP_ACCESS_ERROR = 14, /* SFP read error event */
+ BFA_PORT_AEN_SFP_UNSUPPORT = 15, /* Unsupported SFP event */
+};
+
+enum bfa_port_aen_sfp_pom {
+ BFA_PORT_AEN_SFP_POM_GREEN = 1, /* Normal */
+ BFA_PORT_AEN_SFP_POM_AMBER = 2, /* Warning */
+ BFA_PORT_AEN_SFP_POM_RED = 3, /* Critical */
+ BFA_PORT_AEN_SFP_POM_MAX = BFA_PORT_AEN_SFP_POM_RED
+};
+
+struct bfa_port_aen_data_s {
+ enum bfa_ioc_type_e ioc_type;
+ wwn_t pwwn; /* WWN of the physical port */
+ wwn_t fwwn; /* WWN of the fabric port */
+ mac_t mac; /* MAC addres of the ethernet port,
+ * applicable to CNA port only */
+ int phy_port_num; /*! For SFP related events */
+ enum bfa_port_aen_sfp_pom level; /* Only transitions will
+ * be informed */
+};
+
+#endif /* __BFA_DEFS_PORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_PPORT_H__
+#define __BFA_DEFS_PPORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/fc.h>
+#include <defs/bfa_defs_types.h>
+#include <defs/bfa_defs_qos.h>
+#include <cna/pstats/phyport_defs.h>
+
+/* Modify char* port_stt[] in bfal_port.c if a new state was added */
+enum bfa_pport_states {
+ BFA_PPORT_ST_UNINIT = 1,
+ BFA_PPORT_ST_ENABLING_QWAIT = 2,
+ BFA_PPORT_ST_ENABLING = 3,
+ BFA_PPORT_ST_LINKDOWN = 4,
+ BFA_PPORT_ST_LINKUP = 5,
+ BFA_PPORT_ST_DISABLING_QWAIT = 6,
+ BFA_PPORT_ST_DISABLING = 7,
+ BFA_PPORT_ST_DISABLED = 8,
+ BFA_PPORT_ST_STOPPED = 9,
+ BFA_PPORT_ST_IOCDOWN = 10,
+ BFA_PPORT_ST_IOCDIS = 11,
+ BFA_PPORT_ST_FWMISMATCH = 12,
+ BFA_PPORT_ST_MAX_STATE,
+};
+
+/**
+ * Port speed settings. Each specific speed is a bit field. Use multiple
+ * bits to specify speeds to be selected for auto-negotiation.
+ */
+enum bfa_pport_speed {
+ BFA_PPORT_SPEED_UNKNOWN = 0,
+ BFA_PPORT_SPEED_1GBPS = 1,
+ BFA_PPORT_SPEED_2GBPS = 2,
+ BFA_PPORT_SPEED_4GBPS = 4,
+ BFA_PPORT_SPEED_8GBPS = 8,
+ BFA_PPORT_SPEED_10GBPS = 10,
+ BFA_PPORT_SPEED_AUTO =
+ (BFA_PPORT_SPEED_1GBPS | BFA_PPORT_SPEED_2GBPS |
+ BFA_PPORT_SPEED_4GBPS | BFA_PPORT_SPEED_8GBPS),
+};
+
+/**
+ * Port operational type (in sync with SNIA port type).
+ */
+enum bfa_pport_type {
+ BFA_PPORT_TYPE_UNKNOWN = 1, /* port type is unkown */
+ BFA_PPORT_TYPE_TRUNKED = 2, /* Trunked mode */
+ BFA_PPORT_TYPE_NPORT = 5, /* P2P with switched fabric */
+ BFA_PPORT_TYPE_NLPORT = 6, /* public loop */
+ BFA_PPORT_TYPE_LPORT = 20, /* private loop */
+ BFA_PPORT_TYPE_P2P = 21, /* P2P with no switched fabric */
+ BFA_PPORT_TYPE_VPORT = 22, /* NPIV - virtual port */
+};
+
+/**
+ * Port topology setting. A port's topology and fabric login status
+ * determine its operational type.
+ */
+enum bfa_pport_topology {
+ BFA_PPORT_TOPOLOGY_NONE = 0, /* No valid topology */
+ BFA_PPORT_TOPOLOGY_P2P = 1, /* P2P only */
+ BFA_PPORT_TOPOLOGY_LOOP = 2, /* LOOP topology */
+ BFA_PPORT_TOPOLOGY_AUTO = 3, /* auto topology selection */
+};
+
+/**
+ * Physical port loopback types.
+ */
+enum bfa_pport_opmode {
+ BFA_PPORT_OPMODE_NORMAL = 0x00, /* normal non-loopback mode */
+ BFA_PPORT_OPMODE_LB_INT = 0x01, /* internal loop back */
+ BFA_PPORT_OPMODE_LB_SLW = 0x02, /* serial link wrapback (serdes) */
+ BFA_PPORT_OPMODE_LB_EXT = 0x04, /* external loop back (serdes) */
+ BFA_PPORT_OPMODE_LB_CBL = 0x08, /* cabled loop back */
+ BFA_PPORT_OPMODE_LB_NLINT = 0x20, /* NL_Port internal loopback */
+};
+
+#define BFA_PPORT_OPMODE_LB_HARD(_mode) \
+ ((_mode == BFA_PPORT_OPMODE_LB_INT) || \
+ (_mode == BFA_PPORT_OPMODE_LB_SLW) || \
+ (_mode == BFA_PPORT_OPMODE_LB_EXT))
+
+/**
+ Port State (in sync with SNIA port state).
+ */
+enum bfa_pport_snia_state {
+ BFA_PPORT_STATE_UNKNOWN = 1, /* port is not initialized */
+ BFA_PPORT_STATE_ONLINE = 2, /* port is ONLINE */
+ BFA_PPORT_STATE_DISABLED = 3, /* port is disabled by user */
+ BFA_PPORT_STATE_BYPASSED = 4, /* port is bypassed (in LOOP) */
+ BFA_PPORT_STATE_DIAG = 5, /* port diagnostics is active */
+ BFA_PPORT_STATE_LINKDOWN = 6, /* link is down */
+ BFA_PPORT_STATE_LOOPBACK = 8, /* port is looped back */
+};
+
+/**
+ * Port link state
+ */
+enum bfa_pport_linkstate {
+ BFA_PPORT_LINKUP = 1, /* Physical port/Trunk link up */
+ BFA_PPORT_LINKDOWN = 2, /* Physical port/Trunk link down */
+ BFA_PPORT_TRUNK_LINKDOWN = 3, /* Trunk link down (new tmaster) */
+};
+
+/**
+ * Port link state event
+ */
+#define bfa_pport_event_t enum bfa_pport_linkstate
+
+/**
+ * Port link state reason code
+ */
+enum bfa_pport_linkstate_rsn {
+ BFA_PPORT_LINKSTATE_RSN_NONE = 0,
+ BFA_PPORT_LINKSTATE_RSN_DISABLED = 1,
+ BFA_PPORT_LINKSTATE_RSN_RX_NOS = 2,
+ BFA_PPORT_LINKSTATE_RSN_RX_OLS = 3,
+ BFA_PPORT_LINKSTATE_RSN_RX_LIP = 4,
+ BFA_PPORT_LINKSTATE_RSN_RX_LIPF7 = 5,
+ BFA_PPORT_LINKSTATE_RSN_SFP_REMOVED = 6,
+ BFA_PPORT_LINKSTATE_RSN_PORT_FAULT = 7,
+ BFA_PPORT_LINKSTATE_RSN_RX_LOS = 8,
+ BFA_PPORT_LINKSTATE_RSN_LOCAL_FAULT = 9,
+ BFA_PPORT_LINKSTATE_RSN_REMOTE_FAULT = 10,
+ BFA_PPORT_LINKSTATE_RSN_TIMEOUT = 11,
+
+
+
+ /* CEE related reason codes/errors */
+ CEE_LLDP_INFO_AGED_OUT = 20,
+ CEE_LLDP_SHUTDOWN_TLV_RCVD = 21,
+ CEE_PEER_NOT_ADVERTISE_DCBX = 22,
+ CEE_PEER_NOT_ADVERTISE_PG = 23,
+ CEE_PEER_NOT_ADVERTISE_PFC = 24,
+ CEE_PEER_NOT_ADVERTISE_FCOE = 25,
+ CEE_PG_NOT_COMPATIBLE = 26,
+ CEE_PFC_NOT_COMPATIBLE = 27,
+ CEE_FCOE_NOT_COMPATIBLE = 28,
+ CEE_BAD_PG_RCVD = 29,
+ CEE_BAD_BW_RCVD = 30,
+ CEE_BAD_PFC_RCVD = 31,
+ CEE_BAD_FCOE_PRI_RCVD = 32,
+ CEE_FCOE_PRI_PFC_OFF = 33,
+ CEE_DUP_CONTROL_TLV_RCVD = 34,
+ CEE_DUP_FEAT_TLV_RCVD = 35,
+ CEE_APPLY_NEW_CFG = 36, /* reason, not an error */
+ CEE_PROTOCOL_INIT = 37, /* reason, not an error */
+ CEE_PHY_LINK_DOWN = 38,
+ CEE_LLS_FCOE_ABSENT = 39,
+ CEE_LLS_FCOE_DOWN = 40
+};
+
+/**
+ * Default Target Rate Limiting Speed.
+ */
+#define BFA_PPORT_DEF_TRL_SPEED BFA_PPORT_SPEED_1GBPS
+
+/**
+ * Physical port configuration
+ */
+struct bfa_pport_cfg_s {
+ u8 topology; /* bfa_pport_topology */
+ u8 speed; /* enum bfa_pport_speed */
+ u8 trunked; /* trunked or not */
+ u8 qos_enabled; /* qos enabled or not */
+ u8 trunk_ports; /* bitmap of trunked ports */
+ u8 cfg_hardalpa; /* is hard alpa configured */
+ u16 maxfrsize; /* maximum frame size */
+ u8 hardalpa; /* configured hard alpa */
+ u8 rx_bbcredit; /* receive buffer credits */
+ u8 tx_bbcredit; /* transmit buffer credits */
+ u8 ratelimit; /* ratelimit enabled or not */
+ u8 trl_def_speed; /* ratelimit default speed */
+ u8 rsvd[3];
+ u16 path_tov; /* device path timeout */
+ u16 q_depth; /* SCSI Queue depth */
+};
+
+/**
+ * Port attribute values.
+ */
+struct bfa_pport_attr_s {
+ /*
+ * Static fields
+ */
+ wwn_t nwwn; /* node wwn */
+ wwn_t pwwn; /* port wwn */
+ enum fc_cos cos_supported; /* supported class of services */
+ u32 rsvd;
+ struct fc_symname_s port_symname; /* port symbolic name */
+ enum bfa_pport_speed speed_supported; /* supported speeds */
+ bfa_boolean_t pbind_enabled; /* Will be set if Persistent binding
+ * enabled. Relevant only in Windows
+ */
+
+ /*
+ * Configured values
+ */
+ struct bfa_pport_cfg_s pport_cfg; /* pport cfg */
+
+ /*
+ * Dynamic field - info from BFA
+ */
+ enum bfa_pport_states port_state; /* current port state */
+ enum bfa_pport_speed speed; /* current speed */
+ enum bfa_pport_topology topology; /* current topology */
+ bfa_boolean_t beacon; /* current beacon status */
+ bfa_boolean_t link_e2e_beacon;/* set if link beacon on */
+ bfa_boolean_t plog_enabled; /* set if portlog is enabled*/
+
+ /*
+ * Dynamic field - info from FCS
+ */
+ u32 pid; /* port ID */
+ enum bfa_pport_type port_type; /* current topology */
+ u32 loopback; /* external loopback */
+ u32 rsvd1;
+ u32 rsvd2; /* padding for 64 bit */
+};
+
+/**
+ * FC Port statistics.
+ */
+struct bfa_pport_fc_stats_s {
+ u64 secs_reset; /* seconds since stats is reset */
+ u64 tx_frames; /* transmitted frames */
+ u64 tx_words; /* transmitted words */
+ u64 rx_frames; /* received frames */
+ u64 rx_words; /* received words */
+ u64 lip_count; /* LIPs seen */
+ u64 nos_count; /* NOS count */
+ u64 error_frames; /* errored frames (sent?) */
+ u64 dropped_frames; /* dropped frames */
+ u64 link_failures; /* link failure count */
+ u64 loss_of_syncs; /* loss of sync count */
+ u64 loss_of_signals;/* loss of signal count */
+ u64 primseq_errs; /* primitive sequence protocol */
+ u64 bad_os_count; /* invalid ordered set */
+ u64 err_enc_out; /* Encoding error outside frame */
+ u64 invalid_crcs; /* frames received with invalid CRC*/
+ u64 undersized_frm; /* undersized frames */
+ u64 oversized_frm; /* oversized frames */
+ u64 bad_eof_frm; /* frames with bad EOF */
+ struct bfa_qos_stats_s qos_stats; /* QoS statistics */
+};
+
+/**
+ * Eth Port statistics.
+ */
+struct bfa_pport_eth_stats_s {
+ u64 secs_reset; /* seconds since stats is reset */
+ u64 frame_64; /* both rx and tx counter */
+ u64 frame_65_127; /* both rx and tx counter */
+ u64 frame_128_255; /* both rx and tx counter */
+ u64 frame_256_511; /* both rx and tx counter */
+ u64 frame_512_1023; /* both rx and tx counter */
+ u64 frame_1024_1518; /* both rx and tx counter */
+ u64 frame_1519_1522; /* both rx and tx counter */
+
+ u64 tx_bytes;
+ u64 tx_packets;
+ u64 tx_mcast_packets;
+ u64 tx_bcast_packets;
+ u64 tx_control_frame;
+ u64 tx_drop;
+ u64 tx_jabber;
+ u64 tx_fcs_error;
+ u64 tx_fragments;
+
+ u64 rx_bytes;
+ u64 rx_packets;
+ u64 rx_mcast_packets;
+ u64 rx_bcast_packets;
+ u64 rx_control_frames;
+ u64 rx_unknown_opcode;
+ u64 rx_drop;
+ u64 rx_jabber;
+ u64 rx_fcs_error;
+ u64 rx_alignment_error;
+ u64 rx_frame_length_error;
+ u64 rx_code_error;
+ u64 rx_fragments;
+
+ u64 rx_pause; /* BPC */
+ u64 rx_zero_pause; /* BPC Pause cancellation */
+ u64 tx_pause; /* BPC */
+ u64 tx_zero_pause; /* BPC Pause cancellation */
+ u64 rx_fcoe_pause; /* BPC */
+ u64 rx_fcoe_zero_pause; /* BPC Pause cancellation */
+ u64 tx_fcoe_pause; /* BPC */
+ u64 tx_fcoe_zero_pause; /* BPC Pause cancellation */
+};
+
+/**
+ * Port statistics.
+ */
+union bfa_pport_stats_u {
+ struct bfa_pport_fc_stats_s fc;
+ struct bfa_pport_eth_stats_s eth;
+};
+
+/**
+ * Port FCP mappings.
+ */
+struct bfa_pport_fcpmap_s {
+ char osdevname[256];
+ u32 bus;
+ u32 target;
+ u32 oslun;
+ u32 fcid;
+ wwn_t nwwn;
+ wwn_t pwwn;
+ u64 fcplun;
+ char luid[256];
+};
+
+/**
+ * Port RNID info.
+ */
+struct bfa_pport_rnid_s {
+ wwn_t wwn;
+ u32 unittype;
+ u32 portid;
+ u32 attached_nodes_num;
+ u16 ip_version;
+ u16 udp_port;
+ u8 ipaddr[16];
+ u16 rsvd;
+ u16 topologydiscoveryflags;
+};
+
+/**
+ * Link state information
+ */
+struct bfa_pport_link_s {
+ u8 linkstate; /* Link state bfa_pport_linkstate */
+ u8 linkstate_rsn; /* bfa_pport_linkstate_rsn_t */
+ u8 topology; /* P2P/LOOP bfa_pport_topology */
+ u8 speed; /* Link speed (1/2/4/8 G) */
+ u32 linkstate_opt; /* Linkstate optional data (debug) */
+ u8 trunked; /* Trunked or not (1 or 0) */
+ u8 resvd[3];
+ struct bfa_qos_attr_s qos_attr; /* QoS Attributes */
+ struct bfa_qos_vc_attr_s qos_vc_attr; /* VC info from ELP */
+ union {
+ struct {
+ u8 tmaster;/* Trunk Master or
+ * not (1 or 0) */
+ u8 tlinks; /* Trunk links bitmap
+ * (linkup) */
+ u8 resv1; /* Reserved */
+ } trunk_info;
+
+ struct {
+ u8 myalpa; /* alpa claimed */
+ u8 login_req; /* Login required or
+ * not (1 or 0) */
+ u8 alpabm_val;/* alpa bitmap valid
+ * or not (1 or 0) */
+ struct fc_alpabm_s alpabm; /* alpa bitmap */
+ } loop_info;
+ } tl;
+};
+
+#endif /* __BFA_DEFS_PPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_QOS_H__
+#define __BFA_DEFS_QOS_H__
+
+/**
+ * QoS states
+ */
+enum bfa_qos_state {
+ BFA_QOS_ONLINE = 1, /* QoS is online */
+ BFA_QOS_OFFLINE = 2, /* QoS is offline */
+};
+
+
+/**
+ * QoS Priority levels.
+ */
+enum bfa_qos_priority {
+ BFA_QOS_UNKNOWN = 0,
+ BFA_QOS_HIGH = 1, /* QoS Priority Level High */
+ BFA_QOS_MED = 2, /* QoS Priority Level Medium */
+ BFA_QOS_LOW = 3, /* QoS Priority Level Low */
+};
+
+
+/**
+ * QoS bandwidth allocation for each priority level
+ */
+enum bfa_qos_bw_alloc {
+ BFA_QOS_BW_HIGH = 60, /* bandwidth allocation for High */
+ BFA_QOS_BW_MED = 30, /* bandwidth allocation for Medium */
+ BFA_QOS_BW_LOW = 10, /* bandwidth allocation for Low */
+};
+
+/**
+ * QoS attribute returned in QoS Query
+ */
+struct bfa_qos_attr_s {
+ enum bfa_qos_state state; /* QoS current state */
+ u32 total_bb_cr; /* Total BB Credits */
+};
+
+/**
+ * These fields should be displayed only from the CLI.
+ * There will be a separate BFAL API (get_qos_vc_attr ?)
+ * to retrieve this.
+ *
+ */
+#define BFA_QOS_MAX_VC 16
+
+struct bfa_qos_vc_info_s {
+ u8 vc_credit;
+ u8 borrow_credit;
+ u8 priority;
+ u8 resvd;
+};
+
+struct bfa_qos_vc_attr_s {
+ u16 total_vc_count; /* Total VC Count */
+ u16 shared_credit;
+ u32 elp_opmode_flags;
+ struct bfa_qos_vc_info_s vc_info[BFA_QOS_MAX_VC]; /* as many as
+ * total_vc_count */
+};
+
+/**
+ * QoS statistics
+ */
+struct bfa_qos_stats_s {
+ u32 flogi_sent; /* QoS Flogi sent */
+ u32 flogi_acc_recvd; /* QoS Flogi Acc received */
+ u32 flogi_rjt_recvd; /* QoS Flogi rejects received */
+ u32 flogi_retries; /* QoS Flogi retries */
+
+ u32 elp_recvd; /* QoS ELP received */
+ u32 elp_accepted; /* QoS ELP Accepted */
+ u32 elp_rejected; /* QoS ELP rejected */
+ u32 elp_dropped; /* QoS ELP dropped */
+
+ u32 qos_rscn_recvd; /* QoS RSCN received */
+ u32 rsvd; /* padding for 64 bit alignment */
+};
+
+#endif /* __BFA_DEFS_QOS_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_RPORT_H__
+#define __BFA_DEFS_RPORT_H__
+
+#include <bfa_os_inc.h>
+#include <protocol/types.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_qos.h>
+
+/**
+ * FCS remote port states
+ */
+enum bfa_rport_state {
+ BFA_RPORT_UNINIT = 0, /* PORT is not yet initialized */
+ BFA_RPORT_OFFLINE = 1, /* rport is offline */
+ BFA_RPORT_PLOGI = 2, /* PLOGI to rport is in progress */
+ BFA_RPORT_ONLINE = 3, /* login to rport is complete */
+ BFA_RPORT_PLOGI_RETRY = 4, /* retrying login to rport */
+ BFA_RPORT_NSQUERY = 5, /* nameserver query */
+ BFA_RPORT_ADISC = 6, /* ADISC authentication */
+ BFA_RPORT_LOGO = 7, /* logging out with rport */
+ BFA_RPORT_LOGORCV = 8, /* handling LOGO from rport */
+ BFA_RPORT_NSDISC = 9, /* re-discover rport */
+};
+
+/**
+ * Rport Scsi Function : Initiator/Target.
+ */
+enum bfa_rport_function {
+ BFA_RPORT_INITIATOR = 0x01, /* SCSI Initiator */
+ BFA_RPORT_TARGET = 0x02, /* SCSI Target */
+};
+
+/**
+ * port/node symbolic names for rport
+ */
+#define BFA_RPORT_SYMNAME_MAXLEN 255
+struct bfa_rport_symname_s {
+ char symname[BFA_RPORT_SYMNAME_MAXLEN];
+};
+
+struct bfa_rport_hal_stats_s {
+ u32 sm_un_cr; /* uninit: create events */
+ u32 sm_un_unexp; /* uninit: exception events */
+ u32 sm_cr_on; /* created: online events */
+ u32 sm_cr_del; /* created: delete events */
+ u32 sm_cr_hwf; /* created: IOC down */
+ u32 sm_cr_unexp; /* created: exception events */
+ u32 sm_fwc_rsp; /* fw create: f/w responses */
+ u32 sm_fwc_del; /* fw create: delete events */
+ u32 sm_fwc_off; /* fw create: offline events */
+ u32 sm_fwc_hwf; /* fw create: IOC down */
+ u32 sm_fwc_unexp; /* fw create: exception events*/
+ u32 sm_on_off; /* online: offline events */
+ u32 sm_on_del; /* online: delete events */
+ u32 sm_on_hwf; /* online: IOC down events */
+ u32 sm_on_unexp; /* online: exception events */
+ u32 sm_fwd_rsp; /* fw delete: fw responses */
+ u32 sm_fwd_del; /* fw delete: delete events */
+ u32 sm_fwd_hwf; /* fw delete: IOC down events */
+ u32 sm_fwd_unexp; /* fw delete: exception events*/
+ u32 sm_off_del; /* offline: delete events */
+ u32 sm_off_on; /* offline: online events */
+ u32 sm_off_hwf; /* offline: IOC down events */
+ u32 sm_off_unexp; /* offline: exception events */
+ u32 sm_del_fwrsp; /* delete: fw responses */
+ u32 sm_del_hwf; /* delete: IOC down events */
+ u32 sm_del_unexp; /* delete: exception events */
+ u32 sm_delp_fwrsp; /* delete pend: fw responses */
+ u32 sm_delp_hwf; /* delete pend: IOC downs */
+ u32 sm_delp_unexp; /* delete pend: exceptions */
+ u32 sm_offp_fwrsp; /* off-pending: fw responses */
+ u32 sm_offp_del; /* off-pending: deletes */
+ u32 sm_offp_hwf; /* off-pending: IOC downs */
+ u32 sm_offp_unexp; /* off-pending: exceptions */
+ u32 sm_iocd_off; /* IOC down: offline events */
+ u32 sm_iocd_del; /* IOC down: delete events */
+ u32 sm_iocd_on; /* IOC down: online events */
+ u32 sm_iocd_unexp; /* IOC down: exceptions */
+ u32 rsvd;
+};
+
+/**
+ * FCS remote port statistics
+ */
+struct bfa_rport_stats_s {
+ u32 offlines; /* remote port offline count */
+ u32 onlines; /* remote port online count */
+ u32 rscns; /* RSCN affecting rport */
+ u32 plogis; /* plogis sent */
+ u32 plogi_accs; /* plogi accepts */
+ u32 plogi_timeouts; /* plogi timeouts */
+ u32 plogi_rejects; /* rcvd plogi rejects */
+ u32 plogi_failed; /* local failure */
+ u32 plogi_rcvd; /* plogis rcvd */
+ u32 prli_rcvd; /* inbound PRLIs */
+ u32 adisc_rcvd; /* ADISCs received */
+ u32 adisc_rejects; /* recvd ADISC rejects */
+ u32 adisc_sent; /* ADISC requests sent */
+ u32 adisc_accs; /* ADISC accepted by rport */
+ u32 adisc_failed; /* ADISC failed (no response) */
+ u32 adisc_rejected; /* ADISC rejected by us */
+ u32 logos; /* logos sent */
+ u32 logo_accs; /* LOGO accepts from rport */
+ u32 logo_failed; /* LOGO failures */
+ u32 logo_rejected; /* LOGO rejects from rport */
+ u32 logo_rcvd; /* LOGO from remote port */
+
+ u32 rpsc_rcvd; /* RPSC received */
+ u32 rpsc_rejects; /* recvd RPSC rejects */
+ u32 rpsc_sent; /* RPSC requests sent */
+ u32 rpsc_accs; /* RPSC accepted by rport */
+ u32 rpsc_failed; /* RPSC failed (no response) */
+ u32 rpsc_rejected; /* RPSC rejected by us */
+
+ u32 rsvd;
+ struct bfa_rport_hal_stats_s hal_stats; /* BFA rport stats */
+};
+
+/**
+ * Rport's QoS attributes
+ */
+struct bfa_rport_qos_attr_s {
+ enum bfa_qos_priority qos_priority; /* rport's QoS priority */
+ u32 qos_flow_id; /* QoS flow Id */
+};
+
+/**
+ * FCS remote port attributes returned in queries
+ */
+struct bfa_rport_attr_s {
+ wwn_t nwwn; /* node wwn */
+ wwn_t pwwn; /* port wwn */
+ enum fc_cos cos_supported; /* supported class of services */
+ u32 pid; /* port ID */
+ u32 df_sz; /* Max payload size */
+ enum bfa_rport_state state; /* Rport State machine state */
+ enum fc_cos fc_cos; /* FC classes of services */
+ bfa_boolean_t cisc; /* CISC capable device */
+ struct bfa_rport_symname_s symname; /* Symbolic Name */
+ enum bfa_rport_function scsi_function; /* Initiator/Target */
+ struct bfa_rport_qos_attr_s qos_attr; /* qos attributes */
+ enum bfa_pport_speed curr_speed; /* operating speed got from
+ * RPSC ELS. UNKNOWN, if RPSC
+ * is not supported */
+ bfa_boolean_t trl_enforced; /* TRL enforced ? TRUE/FALSE */
+ enum bfa_pport_speed assigned_speed; /* Speed assigned by the user.
+ * will be used if RPSC is not
+ * supported by the rport */
+};
+
+#define bfa_rport_aen_qos_data_t struct bfa_rport_qos_attr_s
+
+/**
+ * BFA remote port events
+ * Arguments below are in BFAL context from Mgmt
+ * BFA_RPORT_AEN_ONLINE: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_OFFLINE: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_DISCONNECT:[in]: lpwwn [out]: vf_id, lpwwn, rpwwn
+ * BFA_RPORT_AEN_QOS_PRIO: [in]: lpwwn [out]: vf_id, lpwwn, rpwwn, prio
+ * BFA_RPORT_AEN_QOS_FLOWID:[in]: lpwwn [out]: vf_id, lpwwn, rpwwn, flow_id
+ */
+enum bfa_rport_aen_event {
+ BFA_RPORT_AEN_ONLINE = 1, /* RPort online event */
+ BFA_RPORT_AEN_OFFLINE = 2, /* RPort offline event */
+ BFA_RPORT_AEN_DISCONNECT = 3, /* RPort disconnect event */
+ BFA_RPORT_AEN_QOS_PRIO = 4, /* QOS priority change event */
+ BFA_RPORT_AEN_QOS_FLOWID = 5, /* QOS flow Id change event */
+};
+
+struct bfa_rport_aen_data_s {
+ u16 vf_id; /* vf_id of this logical port */
+ u16 rsvd[3];
+ wwn_t ppwwn; /* WWN of its physical port */
+ wwn_t lpwwn; /* WWN of this logical port */
+ wwn_t rpwwn; /* WWN of this remote port */
+ union {
+ bfa_rport_aen_qos_data_t qos;
+ } priv;
+};
+
+#endif /* __BFA_DEFS_RPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_STATUS_H__
+#define __BFA_DEFS_STATUS_H__
+
+/**
+ * API status return values
+ *
+ * NOTE: The error msgs are auto generated from the comments. Only singe line
+ * comments are supported
+ */
+enum bfa_status {
+ BFA_STATUS_OK = 0, /* Success */
+ BFA_STATUS_FAILED = 1, /* Operation failed */
+ BFA_STATUS_EINVAL = 2, /* Invalid params Check input
+ * parameters */
+ BFA_STATUS_ENOMEM = 3, /* Out of resources */
+ BFA_STATUS_ENOSYS = 4, /* Function not implemented */
+ BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if
+ * persists, contact support */
+ BFA_STATUS_EPROTOCOL = 6, /* Protocol error */
+ BFA_STATUS_ENOFCPORTS = 7, /* No FC ports resources */
+ BFA_STATUS_NOFLASH = 8, /* Flash not present */
+ BFA_STATUS_BADFLASH = 9, /* Flash is corrupted or bad */
+ BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */
+ BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */
+ BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted
+ * contact support */
+ BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */
+ BFA_STATUS_ABORTED = 14, /* Operation aborted */
+ BFA_STATUS_NODEV = 15, /* Dev is not present */
+ BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */
+ BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */
+ BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */
+ BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */
+ BFA_STATUS_FCPT_LS_RJT = 20, /* Got LS_RJT for FC Pass
+ * through Req */
+ BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */
+ BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported
+ * limit */
+ BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed
+ * setting */
+ BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */
+ BFA_STATUS_CNFG_FAILED = 25, /* Setting can not be persisted */
+ BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */
+ BFA_STATUS_NO_ADAPTER = 27, /* No Brocade Adapter Found */
+ BFA_STATUS_LINKDOWN = 28, /* Link is down - Check or replace
+ * SFP/cable */
+ BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */
+ BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */
+ BFA_STATUS_NSLOGIN_FAILED = 31, /* Nameserver login failed */
+ BFA_STATUS_NO_RPORTS = 32, /* No remote ports found */
+ BFA_STATUS_NSQUERY_FAILED = 33, /* Nameserver query failed */
+ BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */
+ BFA_STATUS_RPORT_OFFLINE = 35, /* RPORT is not online */
+ BFA_STATUS_TGTOPEN_FAILED = 36, /* Remote SCSI target open failed */
+ BFA_STATUS_BAD_LUNS = 37, /* No valid LUNs found */
+ BFA_STATUS_IO_FAILURE = 38, /* SCSI target IO failure */
+ BFA_STATUS_NO_FABRIC = 39, /* No switched fabric present */
+ BFA_STATUS_EBADF = 40, /* Bad file descriptor */
+ BFA_STATUS_EINTR = 41, /* A signal was caught during ioctl */
+ BFA_STATUS_EIO = 42, /* I/O error */
+ BFA_STATUS_ENOTTY = 43, /* Inappropriate I/O control
+ * operation */
+ BFA_STATUS_ENXIO = 44, /* No such device or address */
+ BFA_STATUS_EFOPEN = 45, /* Failed to open file */
+ BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */
+ BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port
+ * first */
+ BFA_STATUS_BADFRMHDR = 48, /* Bad frame header */
+ BFA_STATUS_BADFRMSZ = 49, /* Bad frame size check and replace
+ * SFP/cable */
+ BFA_STATUS_MISSINGFRM = 50, /* Missing frame check and replace
+ * SFP/cable */
+ BFA_STATUS_LINKTIMEOUT = 51, /* Link timeout check and replace
+ * SFP/cable */
+ BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the
+ * rport */
+ BFA_STATUS_CHECKSUM_FAIL = 53, /* checksum failure */
+ BFA_STATUS_GZME_FAILED = 54, /* Get zone member query failed */
+ BFA_STATUS_SCSISTART_REQD = 55, /* SCSI disk require START command */
+ BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists
+ * contact support */
+ BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */
+ BFA_STATUS_MISMATCH = 58, /* Version mismatch */
+ BFA_STATUS_IOC_ENABLED = 59, /* IOC is already enabled */
+ BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled disable
+ * adapter first */
+ BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational. Enable IOC
+ * and if it still fails,
+ * contact support */
+ BFA_STATUS_ADDR_MAP_FAILURE = 62, /* PCI base address not mapped
+ * in OS */
+ BFA_STATUS_SAME_NAME = 63, /* Name exists! use a different
+ * name */
+ BFA_STATUS_PENDING = 64, /* API completes asynchronously */
+ BFA_STATUS_8G_SPD = 65, /* Speed setting not valid for
+ * 8G HBA */
+ BFA_STATUS_4G_SPD = 66, /* Speed setting not valid for
+ * 4G HBA */
+ BFA_STATUS_AD_IS_ENABLE = 67, /* Adapter is already enabled */
+ BFA_STATUS_EINVAL_TOV = 68, /* Invalid path failover TOV */
+ BFA_STATUS_EINVAL_QDEPTH = 69, /* Invalid queue depth value */
+ BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version
+ * mismatch */
+ BFA_STATUS_DIAG_BUSY = 71, /* diag busy */
+ BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */
+ BFA_STATUS_BEACON_OFF = 73, /* Port Beacon already off */
+ BFA_STATUS_LBEACON_ON = 74, /* Link End-to-End Beacon already
+ * on */
+ BFA_STATUS_LBEACON_OFF = 75, /* Link End-to-End Beacon already
+ * off */
+ BFA_STATUS_PORT_NOT_INITED = 76, /* Port not initialized */
+ BFA_STATUS_RPSC_ENABLED = 77, /* Target has a valid speed */
+ BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */
+ BFA_STATUS_BAD_FILE = 79, /* Not a valid Brocade Boot Code
+ * file */
+ BFA_STATUS_RLIM_EN = 80, /* Target rate limiting is already
+ * enabled */
+ BFA_STATUS_RLIM_DIS = 81, /* Target rate limiting is already
+ * disabled */
+ BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */
+ BFA_STATUS_ADAPTER_DISABLED = 83, /* Adapter is already disabled */
+ BFA_STATUS_BIOS_DISABLED = 84, /* Bios is already disabled */
+ BFA_STATUS_AUTH_ENABLED = 85, /* Authentication is already
+ * enabled */
+ BFA_STATUS_AUTH_DISABLED = 86, /* Authentication is already
+ * disabled */
+ BFA_STATUS_ERROR_TRL_ENABLED = 87, /* Target rate limiting is
+ * enabled */
+ BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */
+ BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */
+ BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact
+ * support */
+ BFA_STATUS_INVALID_DEVID = 91, /* Invalid device id provided */
+ BFA_STATUS_QOS_ENABLED = 92, /* QOS is already enabled */
+ BFA_STATUS_QOS_DISABLED = 93, /* QOS is already disabled */
+ BFA_STATUS_INCORRECT_DRV_CONFIG = 94, /* Check configuration
+ * key/value pair */
+ BFA_STATUS_REG_FAIL = 95, /* Can't read windows registry */
+ BFA_STATUS_IM_INV_CODE = 96, /* Invalid IOCTL code */
+ BFA_STATUS_IM_INV_VLAN = 97, /* Invalid VLAN ID */
+ BFA_STATUS_IM_INV_ADAPT_NAME = 98, /* Invalid adapter name */
+ BFA_STATUS_IM_LOW_RESOURCES = 99, /* Memory allocation failure in
+ * driver */
+ BFA_STATUS_IM_VLANID_IS_PVID = 100, /* Given VLAN id same as PVID */
+ BFA_STATUS_IM_VLANID_EXISTS = 101, /* Given VLAN id already exists */
+ BFA_STATUS_IM_FW_UPDATE_FAIL = 102, /* Updating firmware with new
+ * VLAN ID failed */
+ BFA_STATUS_PORTLOG_ENABLED = 103, /* Port Log is already enabled */
+ BFA_STATUS_PORTLOG_DISABLED = 104, /* Port Log is already disabled */
+ BFA_STATUS_FILE_NOT_FOUND = 105, /* Specified file could not be
+ * found */
+ BFA_STATUS_QOS_FC_ONLY = 106, /* QOS can be enabled for FC mode
+ * only */
+ BFA_STATUS_RLIM_FC_ONLY = 107, /* RATELIM can be enabled for FC mode
+ * only */
+ BFA_STATUS_CT_SPD = 108, /* Invalid speed selection for Catapult. */
+ BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
+ BFA_STATUS_CEE_NOT_DN = 110, /* eth port is not at down state, please
+ * bring down first */
+ BFA_STATUS_10G_SPD = 111, /* Speed setting not valid for 10G HBA */
+ BFA_STATUS_IM_INV_TEAM_NAME = 112, /* Invalid team name */
+ BFA_STATUS_IM_DUP_TEAM_NAME = 113, /* Given team name already
+ * exists */
+ BFA_STATUS_IM_ADAPT_ALREADY_IN_TEAM = 114, /* Given adapter is part
+ * of another team */
+ BFA_STATUS_IM_ADAPT_HAS_VLANS = 115, /* Adapter has VLANs configured.
+ * Delete all VLANs before
+ * creating team */
+ BFA_STATUS_IM_PVID_MISMATCH = 116, /* Mismatching PVIDs configured
+ * for adapters */
+ BFA_STATUS_IM_LINK_SPEED_MISMATCH = 117, /* Mismatching link speeds
+ * configured for adapters */
+ BFA_STATUS_IM_MTU_MISMATCH = 118, /* Mismatching MTUs configured for
+ * adapters */
+ BFA_STATUS_IM_RSS_MISMATCH = 119, /* Mismatching RSS parameters
+ * configured for adapters */
+ BFA_STATUS_IM_HDS_MISMATCH = 120, /* Mismatching HDS parameters
+ * configured for adapters */
+ BFA_STATUS_IM_OFFLOAD_MISMATCH = 121, /* Mismatching offload
+ * parameters configured for
+ * adapters */
+ BFA_STATUS_IM_PORT_PARAMS = 122, /* Error setting port parameters */
+ BFA_STATUS_IM_PORT_NOT_IN_TEAM = 123, /* Port is not part of team */
+ BFA_STATUS_IM_CANNOT_REM_PRI = 124, /* Primary adapter cannot be
+ * removed. Change primary before
+ * removing */
+ BFA_STATUS_IM_MAX_PORTS_REACHED = 125, /* Exceeding maximum ports
+ * per team */
+ BFA_STATUS_IM_LAST_PORT_DELETE = 126, /* Last port in team being
+ * deleted */
+ BFA_STATUS_IM_NO_DRIVER = 127, /* IM driver is not installed */
+ BFA_STATUS_IM_MAX_VLANS_REACHED = 128, /* Exceeding maximum VLANs
+ * per port */
+ BFA_STATUS_TOMCAT_SPD_NOT_ALLOWED = 129, /* Bios speed config not
+ * allowed for CNA */
+ BFA_STATUS_NO_MINPORT_DRIVER = 130, /* Miniport driver is not
+ * loaded */
+ BFA_STATUS_CARD_TYPE_MISMATCH = 131, /* Card type mismatch */
+ BFA_STATUS_BAD_ASICBLK = 132, /* Bad ASIC block */
+ BFA_STATUS_NO_DRIVER = 133, /* Storage/Ethernet driver not loaded */
+ BFA_STATUS_INVALID_MAC = 134, /* Invalid mac address */
+ BFA_STATUS_IM_NO_VLAN = 135, /* No VLANs configured on the adapter */
+ BFA_STATUS_IM_ETH_LB_FAILED = 136, /* Ethernet loopback test failed */
+ BFA_STATUS_IM_PVID_REMOVE = 137, /* Cannot remove port vlan (PVID) */
+ BFA_STATUS_IM_PVID_EDIT = 138, /* Cannot edit port vlan (PVID) */
+ BFA_STATUS_CNA_NO_BOOT = 139, /* Boot upload not allowed for CNA */
+ BFA_STATUS_IM_PVID_NON_ZERO = 140, /* Port VLAN ID (PVID) is Set to
+ * Non-Zero Value */
+ BFA_STATUS_IM_INETCFG_LOCK_FAILED = 141, /* Acquiring Network
+ * Subsytem Lock Failed.Please
+ * try after some time */
+ BFA_STATUS_IM_GET_INETCFG_FAILED = 142, /* Acquiring Network Subsytem
+ * handle Failed. Please try
+ * after some time */
+ BFA_STATUS_IM_NOT_BOUND = 143, /* Brocade 10G Ethernet Service is not
+ * Enabled on this port */
+ BFA_STATUS_INSUFFICIENT_PERMS = 144, /* User doesn't have sufficient
+ * permissions to execute the BCU
+ * application */
+ BFA_STATUS_IM_INV_VLAN_NAME = 145, /* Invalid/Reserved Vlan name
+ * string. The name is not allowed
+ * for the normal Vlans */
+ BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
+ BFA_STATUS_IM_PASSTHRU_EDIT = 147, /* Can not edit passthru vlan id */
+ BFA_STATUS_IM_BIND_FAILED = 148, /*! < IM Driver bind operation
+ * failed */
+ BFA_STATUS_IM_UNBIND_FAILED = 149, /* ! < IM Driver unbind operation
+ * failed */
+ BFA_STATUS_MAX_VAL /* Unknown error code */
+};
+#define bfa_status_t enum bfa_status
+
+enum bfa_eproto_status {
+ BFA_EPROTO_BAD_ACCEPT = 0,
+ BFA_EPROTO_UNKNOWN_RSP = 1
+};
+#define bfa_eproto_status_t enum bfa_eproto_status
+
+#endif /* __BFA_DEFS_STATUS_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_TIN_H__
+#define __BFA_DEFS_TIN_H__
+
+#include <protocol/types.h>
+#include <protocol/fc.h>
+
+/**
+ * FCS tin states
+ */
+enum bfa_tin_state_e {
+ BFA_TIN_SM_OFFLINE = 0, /* tin is offline */
+ BFA_TIN_SM_WOS_LOGIN = 1, /* Waiting PRLI ACC/RJT from ULP */
+ BFA_TIN_SM_WFW_ONLINE = 2, /* Waiting ACK to PRLI ACC from FW */
+ BFA_TIN_SM_ONLINE = 3, /* tin login is complete */
+ BFA_TIN_SM_WIO_RELOGIN = 4, /* tin relogin is in progress */
+ BFA_TIN_SM_WIO_LOGOUT = 5, /* Processing of PRLO req from
+ * Initiator is in progress
+ */
+ BFA_TIN_SM_WOS_LOGOUT = 6, /* Processing of PRLO req from
+ * Initiator is in progress
+ */
+ BFA_TIN_SM_WIO_CLEAN = 7, /* Waiting for IO cleanup before tin
+ * is offline. This can be triggered
+ * by RPORT LOGO (rcvd/sent) or by
+ * PRLO (rcvd/sent)
+ */
+};
+
+struct bfa_prli_req_s {
+ struct fchs_s fchs;
+ struct fc_prli_s prli_payload;
+};
+
+struct bfa_prlo_req_s {
+ struct fchs_s fchs;
+ struct fc_prlo_s prlo_payload;
+};
+
+void bfa_tin_send_login_rsp(void *bfa_tin, u32 login_rsp,
+ struct fc_ls_rjt_s rjt_payload);
+void bfa_tin_send_logout_rsp(void *bfa_tin, u32 logout_rsp,
+ struct fc_ls_rjt_s rjt_payload);
+/**
+ * FCS target port statistics
+ */
+struct bfa_tin_stats_s {
+ u32 onlines; /* ITN nexus onlines (PRLI done) */
+ u32 offlines; /* ITN Nexus offlines */
+ u32 prli_req_parse_err; /* prli req parsing errors */
+ u32 prli_rsp_rjt; /* num prli rsp rejects sent */
+ u32 prli_rsp_acc; /* num prli rsp accepts sent */
+ u32 cleanup_comps; /* ITN cleanup completions */
+};
+
+/**
+ * FCS tin attributes returned in queries
+ */
+struct bfa_tin_attr_s {
+ enum bfa_tin_state_e state;
+ u8 seq_retry; /* Sequence retry supported */
+ u8 rsvd[3];
+};
+
+/**
+ * BFA TIN async event data structure for BFAL
+ */
+enum bfa_tin_aen_event {
+ BFA_TIN_AEN_ONLINE = 1, /* Target online */
+ BFA_TIN_AEN_OFFLINE = 2, /* Target offline */
+ BFA_TIN_AEN_DISCONNECT = 3, /* Target disconnected */
+};
+
+/**
+ * BFA TIN event data structure.
+ */
+struct bfa_tin_aen_data_s {
+ u16 vf_id; /* vf_id of the IT nexus */
+ u16 rsvd[3];
+ wwn_t lpwwn; /* WWN of logical port */
+ wwn_t rpwwn; /* WWN of remote(target) port */
+};
+
+/**
+ * Below APIs are needed from BFA driver
+ * Move these to BFA driver public header file?
+ */
+/* TIN rcvd new PRLI & gets bfad_tin_t ptr from driver this callback */
+void *bfad_tin_rcvd_login_req(void *bfad_tm_port, void *bfa_tin,
+ wwn_t rp_wwn, u32 rp_fcid,
+ struct bfa_prli_req_s prli_req);
+/* TIN rcvd new PRLO */
+void bfad_tin_rcvd_logout_req(void *bfad_tin, wwn_t rp_wwn, u32 rp_fcid,
+ struct bfa_prlo_req_s prlo_req);
+/* TIN is online and ready for IO */
+void bfad_tin_online(void *bfad_tin);
+/* TIN is offline and BFA driver can shutdown its upper stack */
+void bfad_tin_offline(void *bfad_tin);
+/* TIN does not need this BFA driver tin tag anymore, so can be freed */
+void bfad_tin_res_free(void *bfad_tin);
+
+#endif /* __BFA_DEFS_TIN_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_TSENSOR_H__
+#define __BFA_DEFS_TSENSOR_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_types.h>
+
+/**
+ * Temperature sensor status values
+ */
+enum bfa_tsensor_status {
+ BFA_TSENSOR_STATUS_UNKNOWN = 1, /* unkown status */
+ BFA_TSENSOR_STATUS_FAULTY = 2, /* sensor is faulty */
+ BFA_TSENSOR_STATUS_BELOW_MIN = 3, /* temperature below mininum */
+ BFA_TSENSOR_STATUS_NOMINAL = 4, /* normal temperature */
+ BFA_TSENSOR_STATUS_ABOVE_MAX = 5, /* temperature above maximum */
+};
+
+/**
+ * Temperature sensor attribute
+ */
+struct bfa_tsensor_attr_s {
+ enum bfa_tsensor_status status; /* temperature sensor status */
+ u32 value; /* current temperature in celsius */
+};
+
+#endif /* __BFA_DEFS_TSENSOR_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_TYPES_H__
+#define __BFA_DEFS_TYPES_H__
+
+#include <bfa_os_inc.h>
+
+enum bfa_boolean {
+ BFA_FALSE = 0,
+ BFA_TRUE = 1
+};
+#define bfa_boolean_t enum bfa_boolean
+
+#define BFA_STRING_32 32
+
+#endif /* __BFA_DEFS_TYPES_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef __BFA_DEFS_VERSION_H__
+#define __BFA_DEFS_VERSION_H__
+
+#define BFA_VERSION_LEN 64
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_VF_H__
+#define __BFA_DEFS_VF_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_port.h>
+#include <protocol/types.h>
+
+/**
+ * VF states
+ */
+enum bfa_vf_state {
+ BFA_VF_UNINIT = 0, /* fabric is not yet initialized */
+ BFA_VF_LINK_DOWN = 1, /* link is down */
+ BFA_VF_FLOGI = 2, /* flogi is in progress */
+ BFA_VF_AUTH = 3, /* authentication in progress */
+ BFA_VF_NOFABRIC = 4, /* fabric is not present */
+ BFA_VF_ONLINE = 5, /* login to fabric is complete */
+ BFA_VF_EVFP = 6, /* EVFP is in progress */
+ BFA_VF_ISOLATED = 7, /* port isolated due to vf_id mismatch */
+};
+
+/**
+ * VF statistics
+ */
+struct bfa_vf_stats_s {
+ u32 flogi_sent; /* Num FLOGIs sent */
+ u32 flogi_rsp_err; /* FLOGI response errors */
+ u32 flogi_acc_err; /* FLOGI accept errors */
+ u32 flogi_accepts; /* FLOGI accepts received */
+ u32 flogi_rejects; /* FLOGI rejects received */
+ u32 flogi_unknown_rsp; /* Unknown responses for FLOGI */
+ u32 flogi_alloc_wait; /* Allocation waits prior to
+ * sending FLOGI
+ */
+ u32 flogi_rcvd; /* FLOGIs received */
+ u32 flogi_rejected; /* Incoming FLOGIs rejected */
+ u32 fabric_onlines; /* Internal fabric online
+ * notification sent to other
+ * modules
+ */
+ u32 fabric_offlines; /* Internal fabric offline
+ * notification sent to other
+ * modules
+ */
+ u32 resvd;
+};
+
+/**
+ * VF attributes returned in queries
+ */
+struct bfa_vf_attr_s {
+ enum bfa_vf_state state; /* VF state */
+ u32 rsvd;
+ wwn_t fabric_name; /* fabric name */
+};
+
+#endif /* __BFA_DEFS_VF_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_DEFS_VPORT_H__
+#define __BFA_DEFS_VPORT_H__
+
+#include <bfa_os_inc.h>
+#include <defs/bfa_defs_port.h>
+#include <protocol/types.h>
+
+/**
+ * VPORT states
+ */
+enum bfa_vport_state {
+ BFA_FCS_VPORT_UNINIT = 0,
+ BFA_FCS_VPORT_CREATED = 1,
+ BFA_FCS_VPORT_OFFLINE = 1,
+ BFA_FCS_VPORT_FDISC_SEND = 2,
+ BFA_FCS_VPORT_FDISC = 3,
+ BFA_FCS_VPORT_FDISC_RETRY = 4,
+ BFA_FCS_VPORT_ONLINE = 5,
+ BFA_FCS_VPORT_DELETING = 6,
+ BFA_FCS_VPORT_CLEANUP = 6,
+ BFA_FCS_VPORT_LOGO_SEND = 7,
+ BFA_FCS_VPORT_LOGO = 8,
+ BFA_FCS_VPORT_ERROR = 9,
+ BFA_FCS_VPORT_MAX_STATE,
+};
+
+/**
+ * vport statistics
+ */
+struct bfa_vport_stats_s {
+ struct bfa_port_stats_s port_stats; /* base class (port) stats */
+ /*
+ * TODO - remove
+ */
+
+ u32 fdisc_sent; /* num fdisc sent */
+ u32 fdisc_accepts; /* fdisc accepts */
+ u32 fdisc_retries; /* fdisc retries */
+ u32 fdisc_timeouts; /* fdisc timeouts */
+ u32 fdisc_rsp_err; /* fdisc response error */
+ u32 fdisc_acc_bad; /* bad fdisc accepts */
+ u32 fdisc_rejects; /* fdisc rejects */
+ u32 fdisc_unknown_rsp;
+ /*
+ *!< fdisc rsp unknown error
+ */
+ u32 fdisc_alloc_wait;/* fdisc req (fcxp)alloc wait */
+
+ u32 logo_alloc_wait;/* logo req (fcxp) alloc wait */
+ u32 logo_sent; /* logo sent */
+ u32 logo_accepts; /* logo accepts */
+ u32 logo_rejects; /* logo rejects */
+ u32 logo_rsp_err; /* logo rsp errors */
+ u32 logo_unknown_rsp;
+ /* logo rsp unknown errors */
+
+ u32 fab_no_npiv; /* fabric does not support npiv */
+
+ u32 fab_offline; /* offline events from fab SM */
+ u32 fab_online; /* online events from fab SM */
+ u32 fab_cleanup; /* cleanup request from fab SM */
+ u32 rsvd;
+};
+
+/**
+ * BFA vport attribute returned in queries
+ */
+struct bfa_vport_attr_s {
+ struct bfa_port_attr_s port_attr; /* base class (port) attributes */
+ enum bfa_vport_state vport_state; /* vport state */
+ u32 rsvd;
+};
+
+#endif /* __BFA_DEFS_VPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb.h BFA FCS callback interfaces
+ */
+
+#ifndef __BFA_FCB_H__
+#define __BFA_FCB_H__
+
+/**
+ * fcb Main fcs callbacks
+ */
+
+void bfa_fcb_exit(struct bfad_s *bfad);
+
+
+
+#endif /* __BFA_FCB_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+* : bfad_fcpim.h - BFA FCS initiator mode remote port callbacks
+ */
+
+#ifndef __BFAD_FCB_FCPIM_H__
+#define __BFAD_FCB_FCPIM_H__
+
+struct bfad_itnim_s;
+
+/*
+ * RPIM callbacks
+ */
+
+/**
+ * Memory allocation for remote port instance. Called before PRLI is
+ * initiated to the remote target port.
+ *
+ * @param[in] bfad - driver instance
+ * @param[out] itnim - FCS remote port (IM) instance
+ * @param[out] itnim_drv - driver remote port (IM) instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_alloc(struct bfad_s *bfad, struct bfa_fcs_itnim_s **itnim,
+ struct bfad_itnim_s **itnim_drv);
+
+/**
+ * Free remote port (IM) instance.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] itnim_drv - driver remote port instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_free(struct bfad_s *bfad,
+ struct bfad_itnim_s *itnim_drv);
+
+/**
+ * Notification of when login with a remote target device is complete.
+ *
+ * @param[in] itnim_drv - driver remote port instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_online(struct bfad_itnim_s *itnim_drv);
+
+/**
+ * Notification when login with the remote device is severed.
+ *
+ * @param[in] itnim_drv - driver remote port instance
+ *
+ * @return None
+ */
+void bfa_fcb_itnim_offline(struct bfad_itnim_s *itnim_drv);
+
+void bfa_fcb_itnim_tov_begin(struct bfad_itnim_s *itnim_drv);
+void bfa_fcb_itnim_tov(struct bfad_itnim_s *itnim_drv);
+
+#endif /* __BFAD_FCB_FCPIM_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb_port.h BFA FCS virtual port driver interfaces
+ */
+
+#ifndef __BFA_FCB_PORT_H__
+#define __BFA_FCB_PORT_H__
+
+#include <fcb/bfa_fcb_vport.h>
+/**
+ * fcs_port_fcb FCS port driver interfaces
+ */
+
+/*
+ * Forward declarations
+ */
+struct bfad_port_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * Call from FCS to driver module when a port is instantiated. The port
+ * can be a base port or a virtual port with in the base fabric or
+ * a virtual fabric.
+ *
+ * On this callback, driver is supposed to create scsi_host, scsi_tgt or
+ * network interfaces bases on ports personality/roles.
+ *
+ * base port of base fabric: vf_drv == NULL && vp_drv == NULL
+ * vport of base fabric: vf_drv == NULL && vp_drv != NULL
+ * base port of VF: vf_drv != NULL && vp_drv == NULL
+ * vport of VF: vf_drv != NULL && vp_drv != NULL
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] port - FCS port instance
+ * @param[in] roles - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+struct bfad_port_s *bfa_fcb_port_new(struct bfad_s *bfad,
+ struct bfa_fcs_port_s *port,
+ enum bfa_port_role roles, struct bfad_vf_s *vf_drv,
+ struct bfad_vport_s *vp_drv);
+
+/**
+ * Call from FCS to driver module when a port is deleted. The port
+ * can be a base port or a virtual port with in the base fabric or
+ * a virtual fabric.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] roles - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_delete(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+/**
+ * Notification when port transitions to ONLINE state.
+ *
+ * Online notification is a logical link up for the local port. This
+ * notification is sent after a successfull FLOGI, or a successful
+ * link initialization in proviate-loop or N2N topologies.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] roles - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_online(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+/**
+ * Notification when port transitions to OFFLINE state.
+ *
+ * Offline notification is a logical link down for the local port.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] roles - port roles: IM, TM, IP
+ * @param[in] vf_drv - VF driver instance, NULL if base fabric (no VF)
+ * @param[in] vp_drv - vport driver instance, NULL if base port
+ *
+ * @return None
+ */
+void bfa_fcb_port_offline(struct bfad_s *bfad, enum bfa_port_role roles,
+ struct bfad_vf_s *vf_drv, struct bfad_vport_s *vp_drv);
+
+
+#endif /* __BFA_FCB_PORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb_rport.h BFA FCS rport driver interfaces
+ */
+
+#ifndef __BFA_FCB_RPORT_H__
+#define __BFA_FCB_RPORT_H__
+
+/**
+ * fcs_rport_fcb Remote port driver interfaces
+ */
+
+
+struct bfad_rport_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * Completion callback for bfa_fcs_rport_add().
+ *
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_add(struct bfad_rport_s *rport_drv);
+
+/**
+ * Completion callback for bfa_fcs_rport_remove().
+ *
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_remove(struct bfad_rport_s *rport_drv);
+
+/**
+ * Call to allocate a rport instance.
+ *
+ * @param[in] bfad - driver instance
+ * @param[out] rport - BFA FCS instance of rport
+ * @param[out] rport_drv - driver instance of rport
+ *
+ * @retval BFA_STATUS_OK - successfully allocated
+ * @retval BFA_STATUS_ENOMEM - cannot allocate
+ */
+bfa_status_t bfa_fcb_rport_alloc(struct bfad_s *bfad,
+ struct bfa_fcs_rport_s **rport,
+ struct bfad_rport_s **rport_drv);
+
+/**
+ * Call to free rport memory resources.
+ *
+ * @param[in] bfad - driver instance
+ * @param[in] rport_drv - driver instance of rport
+ *
+ * @return None
+ */
+void bfa_fcb_rport_free(struct bfad_s *bfad, struct bfad_rport_s **rport_drv);
+
+
+
+#endif /* __BFA_FCB_RPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb_vf.h BFA FCS virtual fabric driver interfaces
+ */
+
+#ifndef __BFA_FCB_VF_H__
+#define __BFA_FCB_VF_H__
+
+/**
+ * fcs_vf_fcb Virtual fabric driver intrefaces
+ */
+
+
+struct bfad_vf_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * Completion callback for bfa_fcs_vf_stop().
+ *
+ * @param[in] vf_drv - driver instance of vf
+ *
+ * @return None
+ */
+void bfa_fcb_vf_stop(struct bfad_vf_s *vf_drv);
+
+
+
+#endif /* __BFA_FCB_VF_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcb_vport.h BFA FCS virtual port driver interfaces
+ */
+
+#ifndef __BFA_FCB_VPORT_H__
+#define __BFA_FCB_VPORT_H__
+
+/**
+ * fcs_vport_fcb Virtual port driver interfaces
+ */
+
+
+struct bfad_vport_s;
+
+/*
+ * Callback functions from BFA FCS to driver
+ */
+
+/**
+ * Completion callback for bfa_fcs_vport_delete().
+ *
+ * @param[in] vport_drv - driver instance of vport
+ *
+ * @return None
+ */
+void bfa_fcb_vport_delete(struct bfad_vport_s *vport_drv);
+
+
+
+#endif /* __BFA_FCB_VPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_H__
+#define __BFA_FCS_H__
+
+#include <cs/bfa_debug.h>
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_version.h>
+#include <bfa.h>
+#include <fcs/bfa_fcs_fabric.h>
+
+#define BFA_FCS_OS_STR_LEN 64
+
+struct bfa_fcs_stats_s {
+ struct {
+ u32 untagged; /* untagged receive frames */
+ u32 tagged; /* tagged receive frames */
+ u32 vfid_unknown; /* VF id is unknown */
+ } uf;
+};
+
+struct bfa_fcs_driver_info_s {
+ u8 version[BFA_VERSION_LEN]; /* Driver Version */
+ u8 host_machine_name[BFA_FCS_OS_STR_LEN];
+ u8 host_os_name[BFA_FCS_OS_STR_LEN]; /* OS name and version */
+ u8 host_os_patch[BFA_FCS_OS_STR_LEN];/* patch or service pack */
+ u8 os_device_name[BFA_FCS_OS_STR_LEN]; /* Driver Device Name */
+};
+
+struct bfa_fcs_s {
+ struct bfa_s *bfa; /* corresponding BFA bfa instance */
+ struct bfad_s *bfad; /* corresponding BDA driver instance */
+ struct bfa_log_mod_s *logm; /* driver logging module instance */
+ struct bfa_trc_mod_s *trcmod; /* tracing module */
+ struct bfa_aen_s *aen; /* aen component */
+ bfa_boolean_t vf_enabled; /* VF mode is enabled */
+ bfa_boolean_t min_cfg; /* min cfg enabled/disabled */
+ u16 port_vfid; /* port default VF ID */
+ struct bfa_fcs_driver_info_s driver_info;
+ struct bfa_fcs_fabric_s fabric; /* base fabric state machine */
+ struct bfa_fcs_stats_s stats; /* FCS statistics */
+ struct bfa_wc_s wc; /* waiting counter */
+};
+
+/*
+ * bfa fcs API functions
+ */
+void bfa_fcs_init(struct bfa_fcs_s *fcs, struct bfa_s *bfa, struct bfad_s *bfad,
+ bfa_boolean_t min_cfg);
+void bfa_fcs_driver_info_init(struct bfa_fcs_s *fcs,
+ struct bfa_fcs_driver_info_s *driver_info);
+void bfa_fcs_exit(struct bfa_fcs_s *fcs);
+void bfa_fcs_trc_init(struct bfa_fcs_s *fcs, struct bfa_trc_mod_s *trcmod);
+void bfa_fcs_log_init(struct bfa_fcs_s *fcs, struct bfa_log_mod_s *logmod);
+void bfa_fcs_aen_init(struct bfa_fcs_s *fcs, struct bfa_aen_s *aen);
+void bfa_fcs_start(struct bfa_fcs_s *fcs);
+
+#endif /* __BFA_FCS_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_AUTH_H__
+#define __BFA_FCS_AUTH_H__
+
+struct bfa_fcs_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_auth.h>
+#include <defs/bfa_defs_vf.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_sm.h>
+#include <defs/bfa_defs_pport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <protocol/fc_sp.h>
+
+struct bfa_fcs_fabric_s;
+
+
+
+struct bfa_fcs_auth_s {
+ bfa_sm_t sm; /* state machine */
+ bfa_boolean_t policy; /* authentication enabled/disabled */
+ enum bfa_auth_status status; /* authentication status */
+ enum auth_rjt_codes rjt_code; /* auth reject status */
+ enum auth_rjt_code_exps rjt_code_exp; /* auth reject reason */
+ enum bfa_auth_algo algo; /* Authentication algorithm */
+ struct bfa_auth_stats_s stats; /* Statistics */
+ enum auth_dh_gid group; /* DH(diffie-hellman) Group */
+ enum bfa_auth_secretsource source; /* Secret source */
+ char secret[BFA_AUTH_SECRET_STRING_LEN];
+ /* secret string */
+ u8 secret_len;
+ /* secret string length */
+ u8 nretries;
+ /* number of retries */
+ struct bfa_fcs_fabric_s *fabric;/* pointer to fabric */
+ u8 sentcode; /* pointer to response data */
+ u8 *response; /* pointer to response data */
+ struct bfa_timer_s delay_timer; /* delay timer */
+ struct bfa_fcxp_s *fcxp; /* pointer to fcxp */
+ struct bfa_fcxp_wqe_s fcxp_wqe;
+};
+
+/**
+ * bfa fcs authentication public functions
+ */
+bfa_status_t bfa_fcs_auth_get_attr(struct bfa_fcs_s *port,
+ struct bfa_auth_attr_s *attr);
+bfa_status_t bfa_fcs_auth_set_policy(struct bfa_fcs_s *port,
+ bfa_boolean_t policy);
+enum bfa_auth_status bfa_fcs_auth_get_status(struct bfa_fcs_s *port);
+bfa_status_t bfa_fcs_auth_set_algo(struct bfa_fcs_s *port,
+ enum bfa_auth_algo algo);
+bfa_status_t bfa_fcs_auth_get_stats(struct bfa_fcs_s *port,
+ struct bfa_auth_stats_s *stats);
+bfa_status_t bfa_fcs_auth_set_dh_group(struct bfa_fcs_s *port, int group);
+bfa_status_t bfa_fcs_auth_set_secretstring(struct bfa_fcs_s *port,
+ char *secret);
+bfa_status_t bfa_fcs_auth_set_secretstring_encrypt(struct bfa_fcs_s *port,
+ u32 secret[], u32 len);
+bfa_status_t bfa_fcs_auth_set_secretsource(struct bfa_fcs_s *port,
+ enum bfa_auth_secretsource src);
+bfa_status_t bfa_fcs_auth_reset_stats(struct bfa_fcs_s *port);
+bfa_status_t bfa_fcs_auth_reinit(struct bfa_fcs_s *port);
+
+#endif /* __BFA_FCS_AUTH_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_FABRIC_H__
+#define __BFA_FCS_FABRIC_H__
+
+struct bfa_fcs_s;
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_vf.h>
+#include <cs/bfa_q.h>
+#include <cs/bfa_sm.h>
+#include <defs/bfa_defs_pport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <protocol/fc_sp.h>
+#include <fcs/bfa_fcs_auth.h>
+
+/*
+ * forward declaration
+ */
+struct bfad_vf_s;
+
+enum bfa_fcs_fabric_type {
+ BFA_FCS_FABRIC_UNKNOWN = 0,
+ BFA_FCS_FABRIC_SWITCHED = 1,
+ BFA_FCS_FABRIC_PLOOP = 2,
+ BFA_FCS_FABRIC_N2N = 3,
+};
+
+
+struct bfa_fcs_fabric_s {
+ struct list_head qe; /* queue element */
+ bfa_sm_t sm; /* state machine */
+ struct bfa_fcs_s *fcs; /* FCS instance */
+ struct bfa_fcs_port_s bport; /* base logical port */
+ enum bfa_fcs_fabric_type fab_type; /* fabric type */
+ enum bfa_pport_type oper_type; /* current link topology */
+ u8 is_vf; /* is virtual fabric? */
+ u8 is_npiv; /* is NPIV supported ? */
+ u8 is_auth; /* is Security/Auth supported ? */
+ u16 bb_credit; /* BB credit from fabric */
+ u16 vf_id; /* virtual fabric ID */
+ u16 num_vports; /* num vports */
+ u16 rsvd;
+ struct list_head vport_q; /* queue of virtual ports */
+ struct list_head vf_q; /* queue of virtual fabrics */
+ struct bfad_vf_s *vf_drv; /* driver vf structure */
+ struct bfa_timer_s link_timer; /* Link Failure timer. Vport */
+ wwn_t fabric_name; /* attached fabric name */
+ bfa_boolean_t auth_reqd; /* authentication required */
+ struct bfa_timer_s delay_timer; /* delay timer */
+ union {
+ u16 swp_vfid;/* switch port VF id */
+ } event_arg;
+ struct bfa_fcs_auth_s auth; /* authentication config */
+ struct bfa_wc_s wc; /* wait counter for delete */
+ struct bfa_vf_stats_s stats; /* fabric/vf stats */
+ struct bfa_lps_s *lps; /* lport login services */
+ u8 fabric_ip_addr[BFA_FCS_FABRIC_IPADDR_SZ]; /* attached
+ * fabric's ip addr
+ */
+};
+
+#define bfa_fcs_fabric_npiv_capable(__f) (__f)->is_npiv
+#define bfa_fcs_fabric_is_switched(__f) \
+ ((__f)->fab_type == BFA_FCS_FABRIC_SWITCHED)
+
+/**
+ * The design calls for a single implementation of base fabric and vf.
+ */
+#define bfa_fcs_vf_t struct bfa_fcs_fabric_s
+
+struct bfa_vf_event_s {
+ u32 undefined;
+};
+
+/**
+ * bfa fcs vf public functions
+ */
+bfa_status_t bfa_fcs_vf_mode_enable(struct bfa_fcs_s *fcs, u16 vf_id);
+bfa_status_t bfa_fcs_vf_mode_disable(struct bfa_fcs_s *fcs);
+bfa_status_t bfa_fcs_vf_create(bfa_fcs_vf_t *vf, struct bfa_fcs_s *fcs,
+ u16 vf_id, struct bfa_port_cfg_s *port_cfg,
+ struct bfad_vf_s *vf_drv);
+bfa_status_t bfa_fcs_vf_delete(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_start(bfa_fcs_vf_t *vf);
+bfa_status_t bfa_fcs_vf_stop(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_list(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs);
+void bfa_fcs_vf_list_all(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs);
+void bfa_fcs_vf_get_attr(bfa_fcs_vf_t *vf, struct bfa_vf_attr_s *vf_attr);
+void bfa_fcs_vf_get_stats(bfa_fcs_vf_t *vf,
+ struct bfa_vf_stats_s *vf_stats);
+void bfa_fcs_vf_clear_stats(bfa_fcs_vf_t *vf);
+void bfa_fcs_vf_get_ports(bfa_fcs_vf_t *vf, wwn_t vpwwn[], int *nports);
+bfa_fcs_vf_t *bfa_fcs_vf_lookup(struct bfa_fcs_s *fcs, u16 vf_id);
+struct bfad_vf_s *bfa_fcs_vf_get_drv_vf(bfa_fcs_vf_t *vf);
+
+#endif /* __BFA_FCS_FABRIC_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_fcpim.h BFA FCS FCP Initiator Mode interfaces/defines.
+ */
+
+#ifndef __BFA_FCS_FCPIM_H__
+#define __BFA_FCS_FCPIM_H__
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_itnim.h>
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_rport.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <bfa_fcpim.h>
+
+/*
+ * forward declarations
+ */
+struct bfad_itnim_s;
+
+struct bfa_fcs_itnim_s {
+ bfa_sm_t sm; /* state machine */
+ struct bfa_fcs_rport_s *rport; /* parent remote rport */
+ struct bfad_itnim_s *itnim_drv; /* driver peer instance */
+ struct bfa_fcs_s *fcs; /* fcs instance */
+ struct bfa_timer_s timer; /* timer functions */
+ struct bfa_itnim_s *bfa_itnim; /* BFA itnim struct */
+ bfa_boolean_t seq_rec; /* seq recovery support */
+ bfa_boolean_t rec_support; /* REC supported */
+ bfa_boolean_t conf_comp; /* FCP_CONF support */
+ bfa_boolean_t task_retry_id; /* task retry id supp */
+ struct bfa_fcxp_wqe_s fcxp_wqe; /* wait qelem for fcxp */
+ struct bfa_fcxp_s *fcxp; /* FCXP in use */
+ struct bfa_itnim_stats_s stats; /* itn statistics */
+};
+
+
+static inline struct bfad_port_s *
+bfa_fcs_itnim_get_drvport(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->port->bfad_port;
+}
+
+
+static inline struct bfa_fcs_port_s *
+bfa_fcs_itnim_get_port(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->port;
+}
+
+
+static inline wwn_t
+bfa_fcs_itnim_get_nwwn(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->nwwn;
+}
+
+
+static inline wwn_t
+bfa_fcs_itnim_get_pwwn(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->pwwn;
+}
+
+
+static inline u32
+bfa_fcs_itnim_get_fcid(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->pid;
+}
+
+
+static inline u32
+bfa_fcs_itnim_get_maxfrsize(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->maxfrsize;
+}
+
+
+static inline enum fc_cos
+bfa_fcs_itnim_get_cos(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->rport->fc_cos;
+}
+
+
+static inline struct bfad_itnim_s *
+bfa_fcs_itnim_get_drvitn(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->itnim_drv;
+}
+
+
+static inline struct bfa_itnim_s *
+bfa_fcs_itnim_get_halitn(struct bfa_fcs_itnim_s *itnim)
+{
+ return itnim->bfa_itnim;
+}
+
+/**
+ * bfa fcs FCP Initiator mode API functions
+ */
+void bfa_fcs_itnim_get_attr(struct bfa_fcs_itnim_s *itnim,
+ struct bfa_itnim_attr_s *attr);
+void bfa_fcs_itnim_get_stats(struct bfa_fcs_itnim_s *itnim,
+ struct bfa_itnim_stats_s *stats);
+struct bfa_fcs_itnim_s *bfa_fcs_itnim_lookup(struct bfa_fcs_port_s *port,
+ wwn_t rpwwn);
+bfa_status_t bfa_fcs_itnim_attr_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+ struct bfa_itnim_attr_s *attr);
+bfa_status_t bfa_fcs_itnim_stats_get(struct bfa_fcs_port_s *port, wwn_t rpwwn,
+ struct bfa_itnim_stats_s *stats);
+bfa_status_t bfa_fcs_itnim_stats_clear(struct bfa_fcs_port_s *port,
+ wwn_t rpwwn);
+#endif /* __BFA_FCS_FCPIM_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_fdmi.h BFA fcs fdmi module public interface
+ */
+
+#ifndef __BFA_FCS_FDMI_H__
+#define __BFA_FCS_FDMI_H__
+#include <bfa_os_inc.h>
+#include <protocol/fdmi.h>
+
+#define BFA_FCS_FDMI_SUPORTED_SPEEDS (FDMI_TRANS_SPEED_1G | \
+ FDMI_TRANS_SPEED_2G | \
+ FDMI_TRANS_SPEED_4G | \
+ FDMI_TRANS_SPEED_8G)
+
+/*
+* HBA Attribute Block : BFA internal representation. Note : Some variable
+* sizes have been trimmed to suit BFA For Ex : Model will be "Brocade". Based
+ * on this the size has been reduced to 16 bytes from the standard's 64 bytes.
+ */
+struct bfa_fcs_fdmi_hba_attr_s {
+ wwn_t node_name;
+ u8 manufacturer[64];
+ u8 serial_num[64];
+ u8 model[16];
+ u8 model_desc[256];
+ u8 hw_version[8];
+ u8 driver_version[8];
+ u8 option_rom_ver[BFA_VERSION_LEN];
+ u8 fw_version[8];
+ u8 os_name[256];
+ u32 max_ct_pyld;
+};
+
+/*
+ * Port Attribute Block
+ */
+struct bfa_fcs_fdmi_port_attr_s {
+ u8 supp_fc4_types[32]; /* supported FC4 types */
+ u32 supp_speed; /* supported speed */
+ u32 curr_speed; /* current Speed */
+ u32 max_frm_size; /* max frame size */
+ u8 os_device_name[256]; /* OS device Name */
+ u8 host_name[256]; /* host name */
+};
+
+#endif /* __BFA_FCS_FDMI_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_port.h BFA fcs port module public interface
+ */
+
+#ifndef __BFA_FCS_PORT_H__
+#define __BFA_FCS_PORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_pport.h>
+#include <defs/bfa_defs_rport.h>
+#include <cs/bfa_q.h>
+#include <bfa_svc.h>
+#include <cs/bfa_wc.h>
+
+struct bfa_fcs_s;
+struct bfa_fcs_fabric_s;
+
+/*
+* @todo : need to move to a global config file.
+ * Maximum Vports supported per physical port or vf.
+ */
+#define BFA_FCS_MAX_VPORTS_SUPP_CB 255
+#define BFA_FCS_MAX_VPORTS_SUPP_CT 191
+
+/*
+* @todo : need to move to a global config file.
+ * Maximum Rports supported per port (physical/logical).
+ */
+#define BFA_FCS_MAX_RPORTS_SUPP 256 /* @todo : tentative value */
+
+
+struct bfa_fcs_port_ns_s {
+ bfa_sm_t sm; /* state machine */
+ struct bfa_timer_s timer;
+ struct bfa_fcs_port_s *port; /* parent port */
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_fcxp_wqe_s fcxp_wqe;
+};
+
+
+struct bfa_fcs_port_scn_s {
+ bfa_sm_t sm; /* state machine */
+ struct bfa_timer_s timer;
+ struct bfa_fcs_port_s *port; /* parent port */
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_fcxp_wqe_s fcxp_wqe;
+};
+
+
+struct bfa_fcs_port_fdmi_s {
+ bfa_sm_t sm; /* state machine */
+ struct bfa_timer_s timer;
+ struct bfa_fcs_port_ms_s *ms; /* parent ms */
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_fcxp_wqe_s fcxp_wqe;
+ u8 retry_cnt; /* retry count */
+ u8 rsvd[3];
+};
+
+
+struct bfa_fcs_port_ms_s {
+ bfa_sm_t sm; /* state machine */
+ struct bfa_timer_s timer;
+ struct bfa_fcs_port_s *port; /* parent port */
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_fcxp_wqe_s fcxp_wqe;
+ struct bfa_fcs_port_fdmi_s fdmi; /* FDMI component of MS */
+ u8 retry_cnt; /* retry count */
+ u8 rsvd[3];
+};
+
+
+struct bfa_fcs_port_fab_s {
+ struct bfa_fcs_port_ns_s ns; /* NS component of port */
+ struct bfa_fcs_port_scn_s scn; /* scn component of port */
+ struct bfa_fcs_port_ms_s ms; /* MS component of port */
+};
+
+
+
+#define MAX_ALPA_COUNT 127
+
+struct bfa_fcs_port_loop_s {
+ u8 num_alpa; /* Num of ALPA entries in the map */
+ u8 alpa_pos_map[MAX_ALPA_COUNT]; /* ALPA Positional
+ *Map */
+ struct bfa_fcs_port_s *port; /* parent port */
+};
+
+
+
+struct bfa_fcs_port_n2n_s {
+ u32 rsvd;
+ u16 reply_oxid; /* ox_id from the req flogi to be
+ *used in flogi acc */
+ wwn_t rem_port_wwn; /* Attached port's wwn */
+};
+
+
+union bfa_fcs_port_topo_u {
+ struct bfa_fcs_port_fab_s pfab;
+ struct bfa_fcs_port_loop_s ploop;
+ struct bfa_fcs_port_n2n_s pn2n;
+};
+
+
+struct bfa_fcs_port_s {
+ struct list_head qe; /* used by port/vport */
+ bfa_sm_t sm; /* state machine */
+ struct bfa_fcs_fabric_s *fabric; /* parent fabric */
+ struct bfa_port_cfg_s port_cfg; /* port configuration */
+ struct bfa_timer_s link_timer; /* timer for link offline */
+ u32 pid : 24; /* FC address */
+ u8 lp_tag; /* lport tag */
+ u16 num_rports; /* Num of r-ports */
+ struct list_head rport_q; /* queue of discovered r-ports */
+ struct bfa_fcs_s *fcs; /* FCS instance */
+ union bfa_fcs_port_topo_u port_topo; /* fabric/loop/n2n details */
+ struct bfad_port_s *bfad_port; /* driver peer instance */
+ struct bfa_fcs_vport_s *vport; /* NULL for base ports */
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_fcxp_wqe_s fcxp_wqe;
+ struct bfa_port_stats_s stats;
+ struct bfa_wc_s wc; /* waiting counter for events */
+};
+
+#define bfa_fcs_lport_t struct bfa_fcs_port_s
+
+/**
+ * Symbolic Name related defines
+ * Total bytes 255.
+ * Physical Port's symbolic name 128 bytes.
+ * For Vports, Vport's symbolic name is appended to the Physical port's
+ * Symbolic Name.
+ *
+ * Physical Port's symbolic name Format : (Total 128 bytes)
+ * Adapter Model number/name : 12 bytes
+ * Driver Version : 10 bytes
+ * Host Machine Name : 30 bytes
+ * Host OS Info : 48 bytes
+ * Host OS PATCH Info : 16 bytes
+ * ( remaining 12 bytes reserved to be used for separator)
+ */
+#define BFA_FCS_PORT_SYMBNAME_SEPARATOR " | "
+
+#define BFA_FCS_PORT_SYMBNAME_MODEL_SZ 12
+#define BFA_FCS_PORT_SYMBNAME_VERSION_SZ 10
+#define BFA_FCS_PORT_SYMBNAME_MACHINENAME_SZ 30
+#define BFA_FCS_PORT_SYMBNAME_OSINFO_SZ 48
+#define BFA_FCS_PORT_SYMBNAME_OSPATCH_SZ 16
+
+/**
+ * Get FC port ID for a logical port.
+ */
+#define bfa_fcs_port_get_fcid(_lport) ((_lport)->pid)
+#define bfa_fcs_port_get_pwwn(_lport) ((_lport)->port_cfg.pwwn)
+#define bfa_fcs_port_get_nwwn(_lport) ((_lport)->port_cfg.nwwn)
+#define bfa_fcs_port_get_psym_name(_lport) ((_lport)->port_cfg.sym_name)
+#define bfa_fcs_port_is_initiator(_lport) \
+ ((_lport)->port_cfg.roles & BFA_PORT_ROLE_FCP_IM)
+#define bfa_fcs_port_is_target(_lport) \
+ ((_lport)->port_cfg.roles & BFA_PORT_ROLE_FCP_TM)
+#define bfa_fcs_port_get_nrports(_lport) \
+ ((_lport) ? (_lport)->num_rports : 0)
+
+static inline struct bfad_port_s *
+bfa_fcs_port_get_drvport(struct bfa_fcs_port_s *port)
+{
+ return port->bfad_port;
+}
+
+
+#define bfa_fcs_port_get_opertype(_lport) (_lport)->fabric->oper_type
+
+
+#define bfa_fcs_port_get_fabric_name(_lport) (_lport)->fabric->fabric_name
+
+
+#define bfa_fcs_port_get_fabric_ipaddr(_lport) (_lport)->fabric->fabric_ip_addr
+
+/**
+ * bfa fcs port public functions
+ */
+void bfa_fcs_cfg_base_port(struct bfa_fcs_s *fcs,
+ struct bfa_port_cfg_s *port_cfg);
+struct bfa_fcs_port_s *bfa_fcs_get_base_port(struct bfa_fcs_s *fcs);
+void bfa_fcs_port_get_rports(struct bfa_fcs_port_s *port,
+ wwn_t rport_wwns[], int *nrports);
+
+wwn_t bfa_fcs_port_get_rport(struct bfa_fcs_port_s *port, wwn_t wwn,
+ int index, int nrports, bfa_boolean_t bwwn);
+
+struct bfa_fcs_port_s *bfa_fcs_lookup_port(struct bfa_fcs_s *fcs,
+ u16 vf_id, wwn_t lpwwn);
+
+void bfa_fcs_port_get_info(struct bfa_fcs_port_s *port,
+ struct bfa_port_info_s *port_info);
+void bfa_fcs_port_get_attr(struct bfa_fcs_port_s *port,
+ struct bfa_port_attr_s *port_attr);
+void bfa_fcs_port_get_stats(struct bfa_fcs_port_s *fcs_port,
+ struct bfa_port_stats_s *port_stats);
+void bfa_fcs_port_clear_stats(struct bfa_fcs_port_s *fcs_port);
+enum bfa_pport_speed bfa_fcs_port_get_rport_max_speed(
+ struct bfa_fcs_port_s *port);
+void bfa_fcs_port_enable_ipfc_roles(struct bfa_fcs_port_s *fcs_port);
+void bfa_fcs_port_disable_ipfc_roles(struct bfa_fcs_port_s *fcs_port);
+
+#endif /* __BFA_FCS_PORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __BFA_FCS_RPORT_H__
+#define __BFA_FCS_RPORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <cs/bfa_q.h>
+#include <fcs/bfa_fcs.h>
+#include <defs/bfa_defs_rport.h>
+
+#define BFA_FCS_RPORT_DEF_DEL_TIMEOUT 90 /* in secs */
+/*
+ * forward declarations
+ */
+struct bfad_rport_s;
+
+struct bfa_fcs_itnim_s;
+struct bfa_fcs_tin_s;
+struct bfa_fcs_iprp_s;
+
+/* Rport Features (RPF) */
+struct bfa_fcs_rpf_s {
+ bfa_sm_t sm; /* state machine */
+ struct bfa_fcs_rport_s *rport; /* parent rport */
+ struct bfa_timer_s timer; /* general purpose timer */
+ struct bfa_fcxp_s *fcxp; /* FCXP needed for discarding */
+ struct bfa_fcxp_wqe_s fcxp_wqe; /* fcxp wait queue element */
+ int rpsc_retries; /* max RPSC retry attempts */
+ enum bfa_pport_speed rpsc_speed; /* Current Speed from RPSC.
+ * O if RPSC fails */
+ enum bfa_pport_speed assigned_speed; /* Speed assigned by the user.
+ * will be used if RPSC is not
+ * supported by the rport */
+};
+
+struct bfa_fcs_rport_s {
+ struct list_head qe; /* used by port/vport */
+ struct bfa_fcs_port_s *port; /* parent FCS port */
+ struct bfa_fcs_s *fcs; /* fcs instance */
+ struct bfad_rport_s *rp_drv; /* driver peer instance */
+ u32 pid; /* port ID of rport */
+ u16 maxfrsize; /* maximum frame size */
+ u16 reply_oxid; /* OX_ID of inbound requests */
+ enum fc_cos fc_cos; /* FC classes of service supp */
+ bfa_boolean_t cisc; /* CISC capable device */
+ wwn_t pwwn; /* port wwn of rport */
+ wwn_t nwwn; /* node wwn of rport */
+ struct bfa_rport_symname_s psym_name; /* port symbolic name */
+ bfa_sm_t sm; /* state machine */
+ struct bfa_timer_s timer; /* general purpose timer */
+ struct bfa_fcs_itnim_s *itnim; /* ITN initiator mode role */
+ struct bfa_fcs_tin_s *tin; /* ITN initiator mode role */
+ struct bfa_fcs_iprp_s *iprp; /* IP/FC role */
+ struct bfa_rport_s *bfa_rport; /* BFA Rport */
+ struct bfa_fcxp_s *fcxp; /* FCXP needed for discarding */
+ int plogi_retries; /* max plogi retry attempts */
+ int ns_retries; /* max NS query retry attempts */
+ struct bfa_fcxp_wqe_s fcxp_wqe; /* fcxp wait queue element */
+ struct bfa_rport_stats_s stats; /* rport stats */
+ enum bfa_rport_function scsi_function; /* Initiator/Target */
+ struct bfa_fcs_rpf_s rpf; /* Rport features module */
+};
+
+static inline struct bfa_rport_s *
+bfa_fcs_rport_get_halrport(struct bfa_fcs_rport_s *rport)
+{
+ return rport->bfa_rport;
+}
+
+/**
+ * bfa fcs rport API functions
+ */
+bfa_status_t bfa_fcs_rport_add(struct bfa_fcs_port_s *port, wwn_t *pwwn,
+ struct bfa_fcs_rport_s *rport,
+ struct bfad_rport_s *rport_drv);
+bfa_status_t bfa_fcs_rport_remove(struct bfa_fcs_rport_s *rport);
+void bfa_fcs_rport_get_attr(struct bfa_fcs_rport_s *rport,
+ struct bfa_rport_attr_s *attr);
+void bfa_fcs_rport_get_stats(struct bfa_fcs_rport_s *rport,
+ struct bfa_rport_stats_s *stats);
+void bfa_fcs_rport_clear_stats(struct bfa_fcs_rport_s *rport);
+struct bfa_fcs_rport_s *bfa_fcs_rport_lookup(struct bfa_fcs_port_s *port,
+ wwn_t rpwwn);
+struct bfa_fcs_rport_s *bfa_fcs_rport_lookup_by_nwwn(
+ struct bfa_fcs_port_s *port, wwn_t rnwwn);
+void bfa_fcs_rport_set_del_timeout(u8 rport_tmo);
+void bfa_fcs_rport_set_speed(struct bfa_fcs_rport_s *rport,
+ enum bfa_pport_speed speed);
+#endif /* __BFA_FCS_RPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_vport.h BFA fcs vport module public interface
+ */
+
+#ifndef __BFA_FCS_VPORT_H__
+#define __BFA_FCS_VPORT_H__
+
+#include <defs/bfa_defs_status.h>
+#include <defs/bfa_defs_port.h>
+#include <defs/bfa_defs_vport.h>
+#include <fcs/bfa_fcs.h>
+#include <fcb/bfa_fcb_vport.h>
+
+struct bfa_fcs_vport_s {
+ struct list_head qe; /* queue elem */
+ bfa_sm_t sm; /* state machine */
+ bfa_fcs_lport_t lport; /* logical port */
+ struct bfa_timer_s timer; /* general purpose timer */
+ struct bfad_vport_s *vport_drv; /* Driver private */
+ struct bfa_vport_stats_s vport_stats; /* vport statistics */
+ struct bfa_lps_s *lps; /* Lport login service */
+ int fdisc_retries;
+};
+
+#define bfa_fcs_vport_get_port(vport) \
+ ((struct bfa_fcs_port_s *)(&vport->port))
+
+/**
+ * bfa fcs vport public functions
+ */
+bfa_status_t bfa_fcs_vport_create(struct bfa_fcs_vport_s *vport,
+ struct bfa_fcs_s *fcs, u16 vf_id,
+ struct bfa_port_cfg_s *port_cfg,
+ struct bfad_vport_s *vport_drv);
+bfa_status_t bfa_fcs_vport_delete(struct bfa_fcs_vport_s *vport);
+bfa_status_t bfa_fcs_vport_start(struct bfa_fcs_vport_s *vport);
+bfa_status_t bfa_fcs_vport_stop(struct bfa_fcs_vport_s *vport);
+void bfa_fcs_vport_get_attr(struct bfa_fcs_vport_s *vport,
+ struct bfa_vport_attr_s *vport_attr);
+void bfa_fcs_vport_get_stats(struct bfa_fcs_vport_s *vport,
+ struct bfa_vport_stats_s *vport_stats);
+void bfa_fcs_vport_clr_stats(struct bfa_fcs_vport_s *vport);
+struct bfa_fcs_vport_s *bfa_fcs_vport_lookup(struct bfa_fcs_s *fcs,
+ u16 vf_id, wwn_t vpwwn);
+
+#endif /* __BFA_FCS_VPORT_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * messages define for FCS Module
+ */
+#ifndef __BFA_LOG_FCS_H__
+#define __BFA_LOG_FCS_H__
+#include <cs/bfa_log.h>
+#define BFA_LOG_FCS_FABRIC_NOSWITCH \
+ (((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_FCS_FABRIC_ISOLATED \
+ (((u32) BFA_LOG_FCS_ID << BFA_LOG_MODID_OFFSET) | 2)
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for HAL Module */
+#ifndef __BFA_LOG_HAL_H__
+#define __BFA_LOG_HAL_H__
+#include <cs/bfa_log.h>
+#define BFA_LOG_HAL_ASSERT \
+ (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_HAL_HEARTBEAT_FAILURE \
+ (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_HAL_FCPIM_PARM_INVALID \
+ (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 3)
+#define BFA_LOG_HAL_SM_ASSERT \
+ (((u32) BFA_LOG_HAL_ID << BFA_LOG_MODID_OFFSET) | 4)
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/* messages define for LINUX Module */
+#ifndef __BFA_LOG_LINUX_H__
+#define __BFA_LOG_LINUX_H__
+#include <cs/bfa_log.h>
+#define BFA_LOG_LINUX_DEVICE_CLAIMED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_LINUX_HASH_INIT_FAILED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_LINUX_SYSFS_FAILED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 3)
+#define BFA_LOG_LINUX_MEM_ALLOC_FAILED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 4)
+#define BFA_LOG_LINUX_DRIVER_REGISTRATION_FAILED \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 5)
+#define BFA_LOG_LINUX_ITNIM_FREE \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 6)
+#define BFA_LOG_LINUX_ITNIM_ONLINE \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 7)
+#define BFA_LOG_LINUX_ITNIM_OFFLINE \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 8)
+#define BFA_LOG_LINUX_SCSI_HOST_FREE \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 9)
+#define BFA_LOG_LINUX_SCSI_ABORT \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 10)
+#define BFA_LOG_LINUX_SCSI_ABORT_COMP \
+ (((u32) BFA_LOG_LINUX_ID << BFA_LOG_MODID_OFFSET) | 11)
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * messages define for WDRV Module
+ */
+#ifndef __BFA_LOG_WDRV_H__
+#define __BFA_LOG_WDRV_H__
+#include <cs/bfa_log.h>
+#define BFA_LOG_WDRV_IOC_INIT_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 1)
+#define BFA_LOG_WDRV_IOC_INTERNAL_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 2)
+#define BFA_LOG_WDRV_IOC_START_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 3)
+#define BFA_LOG_WDRV_IOC_STOP_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 4)
+#define BFA_LOG_WDRV_INSUFFICIENT_RESOURCES \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 5)
+#define BFA_LOG_WDRV_BASE_ADDRESS_MAP_ERROR \
+ (((u32) BFA_LOG_WDRV_ID << BFA_LOG_MODID_OFFSET) | 6)
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __CT_H__
+#define __CT_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+struct ct_hdr_s{
+ u32 rev_id:8; /* Revision of the CT */
+ u32 in_id:24; /* Initiator Id */
+ u32 gs_type:8; /* Generic service Type */
+ u32 gs_sub_type:8; /* Generic service sub type */
+ u32 options:8; /* options */
+ u32 rsvrd:8; /* reserved */
+ u32 cmd_rsp_code:16;/* ct command/response code */
+ u32 max_res_size:16;/* maximum/residual size */
+ u32 frag_id:8; /* fragment ID */
+ u32 reason_code:8; /* reason code */
+ u32 exp_code:8; /* explanation code */
+ u32 vendor_unq:8; /* vendor unique */
+};
+
+/*
+ * defines for the Revision
+ */
+enum {
+ CT_GS3_REVISION = 0x01,
+};
+
+/*
+ * defines for gs_type
+ */
+enum {
+ CT_GSTYPE_KEYSERVICE = 0xF7,
+ CT_GSTYPE_ALIASSERVICE = 0xF8,
+ CT_GSTYPE_MGMTSERVICE = 0xFA,
+ CT_GSTYPE_TIMESERVICE = 0xFB,
+ CT_GSTYPE_DIRSERVICE = 0xFC,
+};
+
+/*
+ * defines for gs_sub_type for gs type directory service
+ */
+enum {
+ CT_GSSUBTYPE_NAMESERVER = 0x02,
+};
+
+/*
+ * defines for gs_sub_type for gs type management service
+ */
+enum {
+ CT_GSSUBTYPE_CFGSERVER = 0x01,
+ CT_GSSUBTYPE_UNZONED_NS = 0x02,
+ CT_GSSUBTYPE_ZONESERVER = 0x03,
+ CT_GSSUBTYPE_LOCKSERVER = 0x04,
+ CT_GSSUBTYPE_HBA_MGMTSERVER = 0x10, /* for FDMI */
+};
+
+/*
+ * defines for CT response code field
+ */
+enum {
+ CT_RSP_REJECT = 0x8001,
+ CT_RSP_ACCEPT = 0x8002,
+};
+
+/*
+ * defintions for CT reason code
+ */
+enum {
+ CT_RSN_INV_CMD = 0x01,
+ CT_RSN_INV_VER = 0x02,
+ CT_RSN_LOGIC_ERR = 0x03,
+ CT_RSN_INV_SIZE = 0x04,
+ CT_RSN_LOGICAL_BUSY = 0x05,
+ CT_RSN_PROTO_ERR = 0x07,
+ CT_RSN_UNABLE_TO_PERF = 0x09,
+ CT_RSN_NOT_SUPP = 0x0B,
+ CT_RSN_SERVER_NOT_AVBL = 0x0D,
+ CT_RSN_SESSION_COULD_NOT_BE_ESTBD = 0x0E,
+ CT_RSN_VENDOR_SPECIFIC = 0xFF,
+
+};
+
+/*
+ * definitions for explanations code for Name server
+ */
+enum {
+ CT_NS_EXP_NOADDITIONAL = 0x00,
+ CT_NS_EXP_ID_NOT_REG = 0x01,
+ CT_NS_EXP_PN_NOT_REG = 0x02,
+ CT_NS_EXP_NN_NOT_REG = 0x03,
+ CT_NS_EXP_CS_NOT_REG = 0x04,
+ CT_NS_EXP_IPN_NOT_REG = 0x05,
+ CT_NS_EXP_IPA_NOT_REG = 0x06,
+ CT_NS_EXP_FT_NOT_REG = 0x07,
+ CT_NS_EXP_SPN_NOT_REG = 0x08,
+ CT_NS_EXP_SNN_NOT_REG = 0x09,
+ CT_NS_EXP_PT_NOT_REG = 0x0A,
+ CT_NS_EXP_IPP_NOT_REG = 0x0B,
+ CT_NS_EXP_FPN_NOT_REG = 0x0C,
+ CT_NS_EXP_HA_NOT_REG = 0x0D,
+ CT_NS_EXP_FD_NOT_REG = 0x0E,
+ CT_NS_EXP_FF_NOT_REG = 0x0F,
+ CT_NS_EXP_ACCESSDENIED = 0x10,
+ CT_NS_EXP_UNACCEPTABLE_ID = 0x11,
+ CT_NS_EXP_DATABASEEMPTY = 0x12,
+ CT_NS_EXP_NOT_REG_IN_SCOPE = 0x13,
+ CT_NS_EXP_DOM_ID_NOT_PRESENT = 0x14,
+ CT_NS_EXP_PORT_NUM_NOT_PRESENT = 0x15,
+ CT_NS_EXP_NO_DEVICE_ATTACHED = 0x16
+};
+
+/*
+ * defintions for the explanation code for all servers
+ */
+enum {
+ CT_EXP_AUTH_EXCEPTION = 0xF1,
+ CT_EXP_DB_FULL = 0xF2,
+ CT_EXP_DB_EMPTY = 0xF3,
+ CT_EXP_PROCESSING_REQ = 0xF4,
+ CT_EXP_UNABLE_TO_VERIFY_CONN = 0xF5,
+ CT_EXP_DEVICES_NOT_IN_CMN_ZONE = 0xF6
+};
+
+/*
+ * Command codes for Name server
+ */
+enum {
+ GS_GID_PN = 0x0121, /* Get Id on port name */
+ GS_GPN_ID = 0x0112, /* Get port name on ID */
+ GS_GNN_ID = 0x0113, /* Get node name on ID */
+ GS_GID_FT = 0x0171, /* Get Id on FC4 type */
+ GS_GSPN_ID = 0x0118, /* Get symbolic PN on ID */
+ GS_RFT_ID = 0x0217, /* Register fc4type on ID */
+ GS_RSPN_ID = 0x0218, /* Register symbolic PN on ID */
+ GS_RPN_ID = 0x0212, /* Register port name */
+ GS_RNN_ID = 0x0213, /* Register node name */
+ GS_RCS_ID = 0x0214, /* Register class of service */
+ GS_RPT_ID = 0x021A, /* Register port type */
+ GS_GA_NXT = 0x0100, /* Get all next */
+ GS_RFF_ID = 0x021F, /* Register FC4 Feature */
+};
+
+struct fcgs_id_req_s{
+ u32 rsvd:8;
+ u32 dap:24; /* port identifier */
+};
+#define fcgs_gpnid_req_t struct fcgs_id_req_s
+#define fcgs_gnnid_req_t struct fcgs_id_req_s
+#define fcgs_gspnid_req_t struct fcgs_id_req_s
+
+struct fcgs_gidpn_req_s{
+ wwn_t port_name; /* port wwn */
+};
+
+struct fcgs_gidpn_resp_s{
+ u32 rsvd:8;
+ u32 dap:24; /* port identifier */
+};
+
+/**
+ * RFT_ID
+ */
+struct fcgs_rftid_req_s {
+ u32 rsvd:8;
+ u32 dap:24; /* port identifier */
+ u32 fc4_type[8]; /* fc4 types */
+};
+
+/**
+ * RFF_ID : Register FC4 features.
+ */
+
+#define FC_GS_FCP_FC4_FEATURE_INITIATOR 0x02
+#define FC_GS_FCP_FC4_FEATURE_TARGET 0x01
+
+struct fcgs_rffid_req_s{
+ u32 rsvd :8;
+ u32 dap :24; /* port identifier */
+ u32 rsvd1 :16;
+ u32 fc4ftr_bits :8; /* fc4 feature bits */
+ u32 fc4_type :8; /* corresponding FC4 Type */
+};
+
+/**
+ * GID_FT Request
+ */
+struct fcgs_gidft_req_s{
+ u8 reserved;
+ u8 domain_id; /* domain, 0 - all fabric */
+ u8 area_id; /* area, 0 - whole domain */
+ u8 fc4_type; /* FC_TYPE_FCP for SCSI devices */
+}; /* GID_FT Request */
+
+/**
+ * GID_FT Response
+ */
+struct fcgs_gidft_resp_s {
+ u8 last:1; /* last port identifier flag */
+ u8 reserved:7;
+ u32 pid:24; /* port identifier */
+}; /* GID_FT Response */
+
+/**
+ * RSPN_ID
+ */
+struct fcgs_rspnid_req_s{
+ u32 rsvd:8;
+ u32 dap:24; /* port identifier */
+ u8 spn_len; /* symbolic port name length */
+ u8 spn[256]; /* symbolic port name */
+};
+
+/**
+ * RPN_ID
+ */
+struct fcgs_rpnid_req_s{
+ u32 rsvd:8;
+ u32 port_id:24;
+ wwn_t port_name;
+};
+
+/**
+ * RNN_ID
+ */
+struct fcgs_rnnid_req_s{
+ u32 rsvd:8;
+ u32 port_id:24;
+ wwn_t node_name;
+};
+
+/**
+ * RCS_ID
+ */
+struct fcgs_rcsid_req_s{
+ u32 rsvd:8;
+ u32 port_id:24;
+ u32 cos;
+};
+
+/**
+ * RPT_ID
+ */
+struct fcgs_rptid_req_s{
+ u32 rsvd:8;
+ u32 port_id:24;
+ u32 port_type:8;
+ u32 rsvd1:24;
+};
+
+/**
+ * GA_NXT Request
+ */
+struct fcgs_ganxt_req_s{
+ u32 rsvd:8;
+ u32 port_id:24;
+};
+
+/**
+ * GA_NXT Response
+ */
+struct fcgs_ganxt_rsp_s{
+ u32 port_type:8; /* Port Type */
+ u32 port_id:24; /* Port Identifier */
+ wwn_t port_name; /* Port Name */
+ u8 spn_len; /* Length of Symbolic Port Name */
+ char spn[255]; /* Symbolic Port Name */
+ wwn_t node_name; /* Node Name */
+ u8 snn_len; /* Length of Symbolic Node Name */
+ char snn[255]; /* Symbolic Node Name */
+ u8 ipa[8]; /* Initial Process Associator */
+ u8 ip[16]; /* IP Address */
+ u32 cos; /* Class of Service */
+ u32 fc4types[8]; /* FC-4 TYPEs */
+ wwn_t fabric_port_name;
+ /* Fabric Port Name */
+ u32 rsvd:8; /* Reserved */
+ u32 hard_addr:24; /* Hard Address */
+};
+
+/*
+ * Fabric Config Server
+ */
+
+/*
+ * Command codes for Fabric Configuration Server
+ */
+enum {
+ GS_FC_GFN_CMD = 0x0114, /* GS FC Get Fabric Name */
+ GS_FC_GMAL_CMD = 0x0116, /* GS FC GMAL */
+ GS_FC_TRACE_CMD = 0x0400, /* GS FC Trace Route */
+ GS_FC_PING_CMD = 0x0401, /* GS FC Ping */
+};
+
+/*
+ * Source or Destination Port Tags.
+ */
+enum {
+ GS_FTRACE_TAG_NPORT_ID = 1,
+ GS_FTRACE_TAG_NPORT_NAME = 2,
+};
+
+/*
+* Port Value : Could be a Port id or wwn
+ */
+union fcgs_port_val_u{
+ u32 nport_id;
+ wwn_t nport_wwn;
+};
+
+#define GS_FTRACE_MAX_HOP_COUNT 20
+#define GS_FTRACE_REVISION 1
+
+/*
+ * Ftrace Related Structures.
+ */
+
+/*
+ * STR (Switch Trace) Reject Reason Codes. From FC-SW.
+ */
+enum {
+ GS_FTRACE_STR_CMD_COMPLETED_SUCC = 0,
+ GS_FTRACE_STR_CMD_NOT_SUPP_IN_NEXT_SWITCH,
+ GS_FTRACE_STR_NO_RESP_FROM_NEXT_SWITCH,
+ GS_FTRACE_STR_MAX_HOP_CNT_REACHED,
+ GS_FTRACE_STR_SRC_PORT_NOT_FOUND,
+ GS_FTRACE_STR_DST_PORT_NOT_FOUND,
+ GS_FTRACE_STR_DEVICES_NOT_IN_COMMON_ZONE,
+ GS_FTRACE_STR_NO_ROUTE_BW_PORTS,
+ GS_FTRACE_STR_NO_ADDL_EXPLN,
+ GS_FTRACE_STR_FABRIC_BUSY,
+ GS_FTRACE_STR_FABRIC_BUILD_IN_PROGRESS,
+ GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_START = 0xf0,
+ GS_FTRACE_STR_VENDOR_SPECIFIC_ERR_END = 0xff,
+};
+
+/*
+ * Ftrace Request
+ */
+struct fcgs_ftrace_req_s{
+ u32 revision;
+ u16 src_port_tag; /* Source Port tag */
+ u16 src_port_len; /* Source Port len */
+ union fcgs_port_val_u src_port_val; /* Source Port value */
+ u16 dst_port_tag; /* Destination Port tag */
+ u16 dst_port_len; /* Destination Port len */
+ union fcgs_port_val_u dst_port_val; /* Destination Port value */
+ u32 token;
+ u8 vendor_id[8]; /* T10 Vendor Identifier */
+ u8 vendor_info[8]; /* Vendor specific Info */
+ u32 max_hop_cnt; /* Max Hop Count */
+};
+
+/*
+ * Path info structure
+ */
+struct fcgs_ftrace_path_info_s{
+ wwn_t switch_name; /* Switch WWN */
+ u32 domain_id;
+ wwn_t ingress_port_name; /* Ingress ports wwn */
+ u32 ingress_phys_port_num; /* Ingress ports physical port
+ * number
+ */
+ wwn_t egress_port_name; /* Ingress ports wwn */
+ u32 egress_phys_port_num; /* Ingress ports physical port
+ * number
+ */
+};
+
+/*
+ * Ftrace Acc Response
+ */
+struct fcgs_ftrace_resp_s{
+ u32 revision;
+ u32 token;
+ u8 vendor_id[8]; /* T10 Vendor Identifier */
+ u8 vendor_info[8]; /* Vendor specific Info */
+ u32 str_rej_reason_code; /* STR Reject Reason Code */
+ u32 num_path_info_entries; /* No. of path info entries */
+ /*
+ * path info entry/entries.
+ */
+ struct fcgs_ftrace_path_info_s path_info[1];
+
+};
+
+/*
+* Fabric Config Server : FCPing
+ */
+
+/*
+ * FC Ping Request
+ */
+struct fcgs_fcping_req_s{
+ u32 revision;
+ u16 port_tag;
+ u16 port_len; /* Port len */
+ union fcgs_port_val_u port_val; /* Port value */
+ u32 token;
+};
+
+/*
+ * FC Ping Response
+ */
+struct fcgs_fcping_resp_s{
+ u32 token;
+};
+
+/*
+ * Command codes for zone server query.
+ */
+enum {
+ ZS_GZME = 0x0124, /* Get zone member extended */
+};
+
+/*
+ * ZS GZME request
+ */
+#define ZS_GZME_ZNAMELEN 32
+struct zs_gzme_req_s{
+ u8 znamelen;
+ u8 rsvd[3];
+ u8 zname[ZS_GZME_ZNAMELEN];
+};
+
+enum zs_mbr_type{
+ ZS_MBR_TYPE_PWWN = 1,
+ ZS_MBR_TYPE_DOMPORT = 2,
+ ZS_MBR_TYPE_PORTID = 3,
+ ZS_MBR_TYPE_NWWN = 4,
+};
+
+struct zs_mbr_wwn_s{
+ u8 mbr_type;
+ u8 rsvd[3];
+ wwn_t wwn;
+};
+
+struct zs_query_resp_s{
+ u32 nmbrs; /* number of zone members */
+ struct zs_mbr_wwn_s mbr[1];
+};
+
+/*
+ * GMAL Command ( Get ( interconnect Element) Management Address List)
+ * To retrieve the IP Address of a Switch.
+ */
+
+#define CT_GMAL_RESP_PREFIX_TELNET "telnet://"
+#define CT_GMAL_RESP_PREFIX_HTTP "http://"
+
+/* GMAL/GFN request */
+struct fcgs_req_s {
+ wwn_t wwn; /* PWWN/NWWN */
+};
+
+#define fcgs_gmal_req_t struct fcgs_req_s
+#define fcgs_gfn_req_t struct fcgs_req_s
+
+/* Accept Response to GMAL */
+struct fcgs_gmal_resp_s {
+ u32 ms_len; /* Num of entries */
+ u8 ms_ma[256];
+};
+
+struct fc_gmal_entry_s {
+ u8 len;
+ u8 prefix[7]; /* like "http://" */
+ u8 ip_addr[248];
+};
+
+#pragma pack()
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FC_H__
+#define __FC_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+/*
+ * Fibre Channel Header Structure (FCHS) definition
+ */
+struct fchs_s {
+#ifdef __BIGENDIAN
+ u32 routing:4; /* routing bits */
+ u32 cat_info:4; /* category info */
+#else
+ u32 cat_info:4; /* category info */
+ u32 routing:4; /* routing bits */
+#endif
+ u32 d_id:24; /* destination identifier */
+
+ u32 cs_ctl:8; /* class specific control */
+ u32 s_id:24; /* source identifier */
+
+ u32 type:8; /* data structure type */
+ u32 f_ctl:24; /* initial frame control */
+
+ u8 seq_id; /* sequence identifier */
+ u8 df_ctl; /* data field control */
+ u16 seq_cnt; /* sequence count */
+
+ u16 ox_id; /* originator exchange ID */
+ u16 rx_id; /* responder exchange ID */
+
+ u32 ro; /* relative offset */
+};
+/*
+ * Fibre Channel BB_E Header Structure
+ */
+struct fcbbehs_s {
+ u16 ver_rsvd;
+ u32 rsvd[2];
+ u32 rsvd__sof;
+};
+
+#define FC_SEQ_ID_MAX 256
+
+/*
+ * routing bit definitions
+ */
+enum {
+ FC_RTG_FC4_DEV_DATA = 0x0, /* FC-4 Device Data */
+ FC_RTG_EXT_LINK = 0x2, /* Extended Link Data */
+ FC_RTG_FC4_LINK_DATA = 0x3, /* FC-4 Link Data */
+ FC_RTG_VIDEO_DATA = 0x4, /* Video Data */
+ FC_RTG_EXT_HDR = 0x5, /* VFT, IFR or Encapsuled */
+ FC_RTG_BASIC_LINK = 0x8, /* Basic Link data */
+ FC_RTG_LINK_CTRL = 0xC, /* Link Control */
+};
+
+/*
+ * information category for extended link data and FC-4 Link Data
+ */
+enum {
+ FC_CAT_LD_REQUEST = 0x2, /* Request */
+ FC_CAT_LD_REPLY = 0x3, /* Reply */
+ FC_CAT_LD_DIAG = 0xF, /* for DIAG use only */
+};
+
+/*
+ * information category for extended headers (VFT, IFR or encapsulation)
+ */
+enum {
+ FC_CAT_VFT_HDR = 0x0, /* Virtual fabric tagging header */
+ FC_CAT_IFR_HDR = 0x1, /* Inter-Fabric routing header */
+ FC_CAT_ENC_HDR = 0x2, /* Encapsulation header */
+};
+
+/*
+ * information category for FC-4 device data
+ */
+enum {
+ FC_CAT_UNCATEG_INFO = 0x0, /* Uncategorized information */
+ FC_CAT_SOLICIT_DATA = 0x1, /* Solicited Data */
+ FC_CAT_UNSOLICIT_CTRL = 0x2, /* Unsolicited Control */
+ FC_CAT_SOLICIT_CTRL = 0x3, /* Solicited Control */
+ FC_CAT_UNSOLICIT_DATA = 0x4, /* Unsolicited Data */
+ FC_CAT_DATA_DESC = 0x5, /* Data Descriptor */
+ FC_CAT_UNSOLICIT_CMD = 0x6, /* Unsolicited Command */
+ FC_CAT_CMD_STATUS = 0x7, /* Command Status */
+};
+
+/*
+ * information category for Link Control
+ */
+enum {
+ FC_CAT_ACK_1 = 0x00,
+ FC_CAT_ACK_0_N = 0x01,
+ FC_CAT_P_RJT = 0x02,
+ FC_CAT_F_RJT = 0x03,
+ FC_CAT_P_BSY = 0x04,
+ FC_CAT_F_BSY_DATA = 0x05,
+ FC_CAT_F_BSY_LINK_CTL = 0x06,
+ FC_CAT_F_LCR = 0x07,
+ FC_CAT_NTY = 0x08,
+ FC_CAT_END = 0x09,
+};
+
+/*
+ * Type Field Definitions. FC-PH Section 18.5 pg. 165
+ */
+enum {
+ FC_TYPE_BLS = 0x0, /* Basic Link Service */
+ FC_TYPE_ELS = 0x1, /* Extended Link Service */
+ FC_TYPE_IP = 0x5, /* IP */
+ FC_TYPE_FCP = 0x8, /* SCSI-FCP */
+ FC_TYPE_GPP = 0x9, /* SCSI_GPP */
+ FC_TYPE_SERVICES = 0x20, /* Fibre Channel Services */
+ FC_TYPE_FC_FSS = 0x22, /* Fabric Switch Services */
+ FC_TYPE_FC_AL = 0x23, /* FC-AL */
+ FC_TYPE_FC_SNMP = 0x24, /* FC-SNMP */
+ FC_TYPE_MAX = 256, /* 256 FC-4 types */
+};
+
+struct fc_fc4types_s{
+ u8 bits[FC_TYPE_MAX / 8];
+};
+
+/*
+ * Frame Control Definitions. FC-PH Table-45. pg. 168
+ */
+enum {
+ FCTL_EC_ORIG = 0x000000, /* exchange originator */
+ FCTL_EC_RESP = 0x800000, /* exchange responder */
+ FCTL_SEQ_INI = 0x000000, /* sequence initiator */
+ FCTL_SEQ_REC = 0x400000, /* sequence recipient */
+ FCTL_FS_EXCH = 0x200000, /* first sequence of xchg */
+ FCTL_LS_EXCH = 0x100000, /* last sequence of xchg */
+ FCTL_END_SEQ = 0x080000, /* last frame of sequence */
+ FCTL_SI_XFER = 0x010000, /* seq initiative transfer */
+ FCTL_RO_PRESENT = 0x000008, /* relative offset present */
+ FCTL_FILLBYTE_MASK = 0x000003 /* , fill byte mask */
+};
+
+/*
+ * Fabric Well Known Addresses
+ */
+enum {
+ FC_MIN_WELL_KNOWN_ADDR = 0xFFFFF0,
+ FC_DOMAIN_CONTROLLER_MASK = 0xFFFC00,
+ FC_ALIAS_SERVER = 0xFFFFF8,
+ FC_MGMT_SERVER = 0xFFFFFA,
+ FC_TIME_SERVER = 0xFFFFFB,
+ FC_NAME_SERVER = 0xFFFFFC,
+ FC_FABRIC_CONTROLLER = 0xFFFFFD,
+ FC_FABRIC_PORT = 0xFFFFFE,
+ FC_BROADCAST_SERVER = 0xFFFFFF
+};
+
+/*
+ * domain/area/port defines
+ */
+#define FC_DOMAIN_MASK 0xFF0000
+#define FC_DOMAIN_SHIFT 16
+#define FC_AREA_MASK 0x00FF00
+#define FC_AREA_SHIFT 8
+#define FC_PORT_MASK 0x0000FF
+#define FC_PORT_SHIFT 0
+
+#define FC_GET_DOMAIN(p) (((p) & FC_DOMAIN_MASK) >> FC_DOMAIN_SHIFT)
+#define FC_GET_AREA(p) (((p) & FC_AREA_MASK) >> FC_AREA_SHIFT)
+#define FC_GET_PORT(p) (((p) & FC_PORT_MASK) >> FC_PORT_SHIFT)
+
+#define FC_DOMAIN_CTRLR(p) (FC_DOMAIN_CONTROLLER_MASK | (FC_GET_DOMAIN(p)))
+
+enum {
+ FC_RXID_ANY = 0xFFFFU,
+};
+
+/*
+ * generic ELS command
+ */
+struct fc_els_cmd_s{
+ u32 els_code:8; /* ELS Command Code */
+ u32 reserved:24;
+};
+
+/*
+ * ELS Command Codes. FC-PH Table-75. pg. 223
+ */
+enum {
+ FC_ELS_LS_RJT = 0x1, /* Link Service Reject. */
+ FC_ELS_ACC = 0x02, /* Accept */
+ FC_ELS_PLOGI = 0x03, /* N_Port Login. */
+ FC_ELS_FLOGI = 0x04, /* F_Port Login. */
+ FC_ELS_LOGO = 0x05, /* Logout. */
+ FC_ELS_ABTX = 0x06, /* Abort Exchange */
+ FC_ELS_RES = 0x08, /* Read Exchange status */
+ FC_ELS_RSS = 0x09, /* Read sequence status block */
+ FC_ELS_RSI = 0x0A, /* Request Sequence Initiative */
+ FC_ELS_ESTC = 0x0C, /* Estimate Credit. */
+ FC_ELS_RTV = 0x0E, /* Read Timeout Value. */
+ FC_ELS_RLS = 0x0F, /* Read Link Status. */
+ FC_ELS_ECHO = 0x10, /* Echo */
+ FC_ELS_TEST = 0x11, /* Test */
+ FC_ELS_RRQ = 0x12, /* Reinstate Recovery Qualifier. */
+ FC_ELS_REC = 0x13, /* Add this for TAPE support in FCR */
+ FC_ELS_PRLI = 0x20, /* Process Login */
+ FC_ELS_PRLO = 0x21, /* Process Logout. */
+ FC_ELS_SCN = 0x22, /* State Change Notification. */
+ FC_ELS_TPRLO = 0x24, /* Third Party Process Logout. */
+ FC_ELS_PDISC = 0x50, /* Discover N_Port Parameters. */
+ FC_ELS_FDISC = 0x51, /* Discover F_Port Parameters. */
+ FC_ELS_ADISC = 0x52, /* Discover Address. */
+ FC_ELS_FAN = 0x60, /* Fabric Address Notification */
+ FC_ELS_RSCN = 0x61, /* Reg State Change Notification */
+ FC_ELS_SCR = 0x62, /* State Change Registration. */
+ FC_ELS_RTIN = 0x77, /* Mangement server request */
+ FC_ELS_RNID = 0x78, /* Mangement server request */
+ FC_ELS_RLIR = 0x79, /* Registered Link Incident Record */
+
+ FC_ELS_RPSC = 0x7D, /* Report Port Speed Capabilities */
+ FC_ELS_QSA = 0x7E, /* Query Security Attributes. Ref FC-SP */
+ FC_ELS_E2E_LBEACON = 0x81,
+ /* End-to-End Link Beacon */
+ FC_ELS_AUTH = 0x90, /* Authentication. Ref FC-SP */
+ FC_ELS_RFCN = 0x97, /* Request Fabric Change Notification. Ref
+ *FC-SP */
+
+};
+
+/*
+ * Version numbers for FC-PH standards,
+ * used in login to indicate what port
+ * supports. See FC-PH-X table 158.
+ */
+enum {
+ FC_PH_VER_4_3 = 0x09,
+ FC_PH_VER_PH_3 = 0x20,
+};
+
+/*
+ * PDU size defines
+ */
+enum {
+ FC_MIN_PDUSZ = 512,
+ FC_MAX_PDUSZ = 2112,
+};
+
+/*
+ * N_Port PLOGI Common Service Parameters.
+ * FC-PH-x. Figure-76. pg. 308.
+ */
+struct fc_plogi_csp_s{
+ u8 verhi; /* FC-PH high version */
+ u8 verlo; /* FC-PH low version */
+ u16 bbcred; /* BB_Credit */
+
+#ifdef __BIGENDIAN
+ u8 ciro:1, /* continuously increasing RO */
+ rro:1, /* random relative offset */
+ npiv_supp:1, /* NPIV supported */
+ port_type:1, /* N_Port/F_port */
+ altbbcred:1, /* alternate BB_Credit */
+ resolution:1, /* ms/ns ED_TOV resolution */
+ vvl_info:1, /* VVL Info included */
+ reserved1:1;
+
+ u8 hg_supp:1,
+ query_dbc:1,
+ security:1,
+ sync_cap:1,
+ r_t_tov:1,
+ dh_dup_supp:1,
+ cisc:1, /* continuously increasing seq count */
+ payload:1;
+#else
+ u8 reserved2:2,
+ resolution:1, /* ms/ns ED_TOV resolution */
+ altbbcred:1, /* alternate BB_Credit */
+ port_type:1, /* N_Port/F_port */
+ npiv_supp:1, /* NPIV supported */
+ rro:1, /* random relative offset */
+ ciro:1; /* continuously increasing RO */
+
+ u8 payload:1,
+ cisc:1, /* continuously increasing seq count */
+ dh_dup_supp:1,
+ r_t_tov:1,
+ sync_cap:1,
+ security:1,
+ query_dbc:1,
+ hg_supp:1;
+#endif
+
+ u16 rxsz; /* recieve data_field size */
+
+ u16 conseq;
+ u16 ro_bitmap;
+
+ u32 e_d_tov;
+};
+
+/*
+ * N_Port PLOGI Class Specific Parameters.
+ * FC-PH-x. Figure 78. pg. 318.
+ */
+struct fc_plogi_clp_s{
+#ifdef __BIGENDIAN
+ u32 class_valid:1;
+ u32 intermix:1; /* class intermix supported if set =1.
+ * valid only for class1. Reserved for
+ * class2 & class3
+ */
+ u32 reserved1:2;
+ u32 sequential:1;
+ u32 reserved2:3;
+#else
+ u32 reserved2:3;
+ u32 sequential:1;
+ u32 reserved1:2;
+ u32 intermix:1; /* class intermix supported if set =1.
+ * valid only for class1. Reserved for
+ * class2 & class3
+ */
+ u32 class_valid:1;
+#endif
+
+ u32 reserved3:24;
+
+ u32 reserved4:16;
+ u32 rxsz:16; /* Receive data_field size */
+
+ u32 reserved5:8;
+ u32 conseq:8;
+ u32 e2e_credit:16; /* end to end credit */
+
+ u32 reserved7:8;
+ u32 ospx:8;
+ u32 reserved8:16;
+};
+
+#define FLOGI_VVL_BRCD 0x42524344 /* ASCII value for each character in
+ * string "BRCD" */
+
+/*
+ * PLOGI els command and reply payload
+ */
+struct fc_logi_s{
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ struct fc_plogi_csp_s csp; /* common service params */
+ wwn_t port_name;
+ wwn_t node_name;
+ struct fc_plogi_clp_s class1; /* class 1 service parameters */
+ struct fc_plogi_clp_s class2; /* class 2 service parameters */
+ struct fc_plogi_clp_s class3; /* class 3 service parameters */
+ struct fc_plogi_clp_s class4; /* class 4 service parameters */
+ u8 vvl[16]; /* vendor version level */
+};
+
+/*
+ * LOGO els command payload
+ */
+struct fc_logo_s{
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 nport_id:24; /* N_Port identifier of source */
+ wwn_t orig_port_name; /* Port name of the LOGO originator */
+};
+
+/*
+ * ADISC els command payload
+ */
+struct fc_adisc_s {
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 orig_HA:24; /* originator hard address */
+ wwn_t orig_port_name; /* originator port name */
+ wwn_t orig_node_name; /* originator node name */
+ u32 res2:8;
+ u32 nport_id:24; /* originator NPortID */
+};
+
+/*
+ * Exchange status block
+ */
+struct fc_exch_status_blk_s{
+ u32 oxid:16;
+ u32 rxid:16;
+ u32 res1:8;
+ u32 orig_np:24; /* originator NPortID */
+ u32 res2:8;
+ u32 resp_np:24; /* responder NPortID */
+ u32 es_bits;
+ u32 res3;
+ /*
+ * un modified section of the fields
+ */
+};
+
+/*
+ * RES els command payload
+ */
+struct fc_res_s {
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 nport_id:24; /* N_Port identifier of source */
+ u32 oxid:16;
+ u32 rxid:16;
+ u8 assoc_hdr[32];
+};
+
+/*
+ * RES els accept payload
+ */
+struct fc_res_acc_s{
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ struct fc_exch_status_blk_s fc_exch_blk; /* Exchange status block */
+};
+
+/*
+ * REC els command payload
+ */
+struct fc_rec_s {
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 nport_id:24; /* N_Port identifier of source */
+ u32 oxid:16;
+ u32 rxid:16;
+};
+
+#define FC_REC_ESB_OWN_RSP 0x80000000 /* responder owns */
+#define FC_REC_ESB_SI 0x40000000 /* SI is owned */
+#define FC_REC_ESB_COMP 0x20000000 /* exchange is complete */
+#define FC_REC_ESB_ENDCOND_ABN 0x10000000 /* abnormal ending */
+#define FC_REC_ESB_RQACT 0x04000000 /* recovery qual active */
+#define FC_REC_ESB_ERRP_MSK 0x03000000
+#define FC_REC_ESB_OXID_INV 0x00800000 /* invalid OXID */
+#define FC_REC_ESB_RXID_INV 0x00400000 /* invalid RXID */
+#define FC_REC_ESB_PRIO_INUSE 0x00200000
+
+/*
+ * REC els accept payload
+ */
+struct fc_rec_acc_s {
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ u32 oxid:16;
+ u32 rxid:16;
+ u32 res1:8;
+ u32 orig_id:24; /* N_Port id of exchange originator */
+ u32 res2:8;
+ u32 resp_id:24; /* N_Port id of exchange responder */
+ u32 count; /* data transfer count */
+ u32 e_stat; /* exchange status */
+};
+
+/*
+ * RSI els payload
+ */
+struct fc_rsi_s {
+ struct fc_els_cmd_s els_cmd;
+ u32 res1:8;
+ u32 orig_sid:24;
+ u32 oxid:16;
+ u32 rxid:16;
+};
+
+/*
+ * structure for PRLI paramater pages, both request & response
+ * see FC-PH-X table 113 & 115 for explanation also FCP table 8
+ */
+struct fc_prli_params_s{
+ u32 reserved: 16;
+#ifdef __BIGENDIAN
+ u32 reserved1: 5;
+ u32 rec_support : 1;
+ u32 task_retry_id : 1;
+ u32 retry : 1;
+
+ u32 confirm : 1;
+ u32 doverlay:1;
+ u32 initiator:1;
+ u32 target:1;
+ u32 cdmix:1;
+ u32 drmix:1;
+ u32 rxrdisab:1;
+ u32 wxrdisab:1;
+#else
+ u32 retry : 1;
+ u32 task_retry_id : 1;
+ u32 rec_support : 1;
+ u32 reserved1: 5;
+
+ u32 wxrdisab:1;
+ u32 rxrdisab:1;
+ u32 drmix:1;
+ u32 cdmix:1;
+ u32 target:1;
+ u32 initiator:1;
+ u32 doverlay:1;
+ u32 confirm : 1;
+#endif
+};
+
+/*
+ * valid values for rspcode in PRLI ACC payload
+ */
+enum {
+ FC_PRLI_ACC_XQTD = 0x1, /* request executed */
+ FC_PRLI_ACC_PREDEF_IMG = 0x5, /* predefined image - no prli needed */
+};
+
+struct fc_prli_params_page_s{
+ u32 type:8;
+ u32 codext:8;
+#ifdef __BIGENDIAN
+ u32 origprocasv:1;
+ u32 rsppav:1;
+ u32 imagepair:1;
+ u32 reserved1:1;
+ u32 rspcode:4;
+#else
+ u32 rspcode:4;
+ u32 reserved1:1;
+ u32 imagepair:1;
+ u32 rsppav:1;
+ u32 origprocasv:1;
+#endif
+ u32 reserved2:8;
+
+ u32 origprocas;
+ u32 rspprocas;
+ struct fc_prli_params_s servparams;
+};
+
+/*
+ * PRLI request and accept payload, FC-PH-X tables 112 & 114
+ */
+struct fc_prli_s{
+ u32 command:8;
+ u32 pglen:8;
+ u32 pagebytes:16;
+ struct fc_prli_params_page_s parampage;
+};
+
+/*
+ * PRLO logout params page
+ */
+struct fc_prlo_params_page_s{
+ u32 type:8;
+ u32 type_ext:8;
+#ifdef __BIGENDIAN
+ u32 opa_valid:1; /* originator process associator
+ * valid
+ */
+ u32 rpa_valid:1; /* responder process associator valid */
+ u32 res1:14;
+#else
+ u32 res1:14;
+ u32 rpa_valid:1; /* responder process associator valid */
+ u32 opa_valid:1; /* originator process associator
+ * valid
+ */
+#endif
+ u32 orig_process_assc;
+ u32 resp_process_assc;
+
+ u32 res2;
+};
+
+/*
+ * PRLO els command payload
+ */
+struct fc_prlo_s{
+ u32 command:8;
+ u32 page_len:8;
+ u32 payload_len:16;
+ struct fc_prlo_params_page_s prlo_params[1];
+};
+
+/*
+ * PRLO Logout response parameter page
+ */
+struct fc_prlo_acc_params_page_s{
+ u32 type:8;
+ u32 type_ext:8;
+
+#ifdef __BIGENDIAN
+ u32 opa_valid:1; /* originator process associator
+ * valid
+ */
+ u32 rpa_valid:1; /* responder process associator valid */
+ u32 res1:14;
+#else
+ u32 res1:14;
+ u32 rpa_valid:1; /* responder process associator valid */
+ u32 opa_valid:1; /* originator process associator
+ * valid
+ */
+#endif
+ u32 orig_process_assc;
+ u32 resp_process_assc;
+
+ u32 fc4type_csp;
+};
+
+/*
+ * PRLO els command ACC payload
+ */
+struct fc_prlo_acc_s{
+ u32 command:8;
+ u32 page_len:8;
+ u32 payload_len:16;
+ struct fc_prlo_acc_params_page_s prlo_acc_params[1];
+};
+
+/*
+ * SCR els command payload
+ */
+enum {
+ FC_SCR_REG_FUNC_FABRIC_DETECTED = 0x01,
+ FC_SCR_REG_FUNC_N_PORT_DETECTED = 0x02,
+ FC_SCR_REG_FUNC_FULL = 0x03,
+ FC_SCR_REG_FUNC_CLEAR_REG = 0xFF,
+};
+
+/* SCR VU registrations */
+enum {
+ FC_VU_SCR_REG_FUNC_FABRIC_NAME_CHANGE = 0x01
+};
+
+struct fc_scr_s{
+ u32 command:8;
+ u32 res:24;
+ u32 vu_reg_func:8; /* Vendor Unique Registrations */
+ u32 res1:16;
+ u32 reg_func:8;
+};
+
+/*
+ * Information category for Basic link data
+ */
+enum {
+ FC_CAT_NOP = 0x0,
+ FC_CAT_ABTS = 0x1,
+ FC_CAT_RMC = 0x2,
+ FC_CAT_BA_ACC = 0x4,
+ FC_CAT_BA_RJT = 0x5,
+ FC_CAT_PRMT = 0x6,
+};
+
+/*
+ * LS_RJT els reply payload
+ */
+struct fc_ls_rjt_s {
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 reason_code:8; /* Reason code for reject */
+ u32 reason_code_expl:8; /* Reason code explanation */
+ u32 vendor_unique:8; /* Vendor specific */
+};
+
+/*
+ * LS_RJT reason codes
+ */
+enum {
+ FC_LS_RJT_RSN_INV_CMD_CODE = 0x01,
+ FC_LS_RJT_RSN_LOGICAL_ERROR = 0x03,
+ FC_LS_RJT_RSN_LOGICAL_BUSY = 0x05,
+ FC_LS_RJT_RSN_PROTOCOL_ERROR = 0x07,
+ FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD = 0x09,
+ FC_LS_RJT_RSN_CMD_NOT_SUPP = 0x0B,
+};
+
+/*
+ * LS_RJT reason code explanation
+ */
+enum {
+ FC_LS_RJT_EXP_NO_ADDL_INFO = 0x00,
+ FC_LS_RJT_EXP_SPARMS_ERR_OPTIONS = 0x01,
+ FC_LS_RJT_EXP_SPARMS_ERR_INI_CTL = 0x03,
+ FC_LS_RJT_EXP_SPARMS_ERR_REC_CTL = 0x05,
+ FC_LS_RJT_EXP_SPARMS_ERR_RXSZ = 0x07,
+ FC_LS_RJT_EXP_SPARMS_ERR_CONSEQ = 0x09,
+ FC_LS_RJT_EXP_SPARMS_ERR_CREDIT = 0x0B,
+ FC_LS_RJT_EXP_INV_PORT_NAME = 0x0D,
+ FC_LS_RJT_EXP_INV_NODE_FABRIC_NAME = 0x0E,
+ FC_LS_RJT_EXP_INV_CSP = 0x0F,
+ FC_LS_RJT_EXP_INV_ASSOC_HDR = 0x11,
+ FC_LS_RJT_EXP_ASSOC_HDR_REQD = 0x13,
+ FC_LS_RJT_EXP_INV_ORIG_S_ID = 0x15,
+ FC_LS_RJT_EXP_INV_OXID_RXID_COMB = 0x17,
+ FC_LS_RJT_EXP_CMD_ALREADY_IN_PROG = 0x19,
+ FC_LS_RJT_EXP_LOGIN_REQUIRED = 0x1E,
+ FC_LS_RJT_EXP_INVALID_NPORT_ID = 0x1F,
+ FC_LS_RJT_EXP_INSUFF_RES = 0x29,
+ FC_LS_RJT_EXP_CMD_NOT_SUPP = 0x2C,
+ FC_LS_RJT_EXP_INV_PAYLOAD_LEN = 0x2D,
+};
+
+/*
+ * RRQ els command payload
+ */
+struct fc_rrq_s{
+ struct fc_els_cmd_s els_cmd; /* ELS command code */
+ u32 res1:8;
+ u32 s_id:24; /* exchange originator S_ID */
+
+ u32 ox_id:16; /* originator exchange ID */
+ u32 rx_id:16; /* responder exchange ID */
+
+ u32 res2[8]; /* optional association header */
+};
+
+/*
+ * ABTS BA_ACC reply payload
+ */
+struct fc_ba_acc_s{
+ u32 seq_id_valid:8; /* set to 0x00 for Abort Exchange */
+ u32 seq_id:8; /* invalid for Abort Exchange */
+ u32 res2:16;
+ u32 ox_id:16; /* OX_ID from ABTS frame */
+ u32 rx_id:16; /* RX_ID from ABTS frame */
+ u32 low_seq_cnt:16; /* set to 0x0000 for Abort Exchange */
+ u32 high_seq_cnt:16;/* set to 0xFFFF for Abort Exchange */
+};
+
+/*
+ * ABTS BA_RJT reject payload
+ */
+struct fc_ba_rjt_s{
+ u32 res1:8; /* Reserved */
+ u32 reason_code:8; /* reason code for reject */
+ u32 reason_expl:8; /* reason code explanation */
+ u32 vendor_unique:8;/* vendor unique reason code,set to 0 */
+};
+
+/*
+ * TPRLO logout parameter page
+ */
+struct fc_tprlo_params_page_s{
+ u32 type:8;
+ u32 type_ext:8;
+
+#ifdef __BIGENDIAN
+ u32 opa_valid:1;
+ u32 rpa_valid:1;
+ u32 tpo_nport_valid:1;
+ u32 global_process_logout:1;
+ u32 res1:12;
+#else
+ u32 res1:12;
+ u32 global_process_logout:1;
+ u32 tpo_nport_valid:1;
+ u32 rpa_valid:1;
+ u32 opa_valid:1;
+#endif
+
+ u32 orig_process_assc;
+ u32 resp_process_assc;
+
+ u32 res2:8;
+ u32 tpo_nport_id;
+};
+
+/*
+ * TPRLO ELS command payload
+ */
+struct fc_tprlo_s{
+ u32 command:8;
+ u32 page_len:8;
+ u32 payload_len:16;
+
+ struct fc_tprlo_params_page_s tprlo_params[1];
+};
+
+enum fc_tprlo_type{
+ FC_GLOBAL_LOGO = 1,
+ FC_TPR_LOGO
+};
+
+/*
+ * TPRLO els command ACC payload
+ */
+struct fc_tprlo_acc_s{
+ u32 command:8;
+ u32 page_len:8;
+ u32 payload_len:16;
+ struct fc_prlo_acc_params_page_s tprlo_acc_params[1];
+};
+
+/*
+ * RSCN els command req payload
+ */
+#define FC_RSCN_PGLEN 0x4
+
+enum fc_rscn_format{
+ FC_RSCN_FORMAT_PORTID = 0x0,
+ FC_RSCN_FORMAT_AREA = 0x1,
+ FC_RSCN_FORMAT_DOMAIN = 0x2,
+ FC_RSCN_FORMAT_FABRIC = 0x3,
+};
+
+struct fc_rscn_event_s{
+ u32 format:2;
+ u32 qualifier:4;
+ u32 resvd:2;
+ u32 portid:24;
+};
+
+struct fc_rscn_pl_s{
+ u8 command;
+ u8 pagelen;
+ u16 payldlen;
+ struct fc_rscn_event_s event[1];
+};
+
+/*
+ * ECHO els command req payload
+ */
+struct fc_echo_s {
+ struct fc_els_cmd_s els_cmd;
+};
+
+/*
+ * RNID els command
+ */
+
+#define RNID_NODEID_DATA_FORMAT_COMMON 0x00
+#define RNID_NODEID_DATA_FORMAT_FCP3 0x08
+#define RNID_NODEID_DATA_FORMAT_DISCOVERY 0xDF
+
+#define RNID_ASSOCIATED_TYPE_UNKNOWN 0x00000001
+#define RNID_ASSOCIATED_TYPE_OTHER 0x00000002
+#define RNID_ASSOCIATED_TYPE_HUB 0x00000003
+#define RNID_ASSOCIATED_TYPE_SWITCH 0x00000004
+#define RNID_ASSOCIATED_TYPE_GATEWAY 0x00000005
+#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE 0x00000009
+#define RNID_ASSOCIATED_TYPE_HOST 0x0000000A
+#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM 0x0000000B
+#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE 0x0000000E
+#define RNID_ASSOCIATED_TYPE_NAS_SERVER 0x00000011
+#define RNID_ASSOCIATED_TYPE_BRIDGE 0x00000002
+#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE 0x00000003
+#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE 0x000000FF
+
+/*
+ * RNID els command payload
+ */
+struct fc_rnid_cmd_s{
+ struct fc_els_cmd_s els_cmd;
+ u32 node_id_data_format:8;
+ u32 reserved:24;
+};
+
+/*
+ * RNID els response payload
+ */
+
+struct fc_rnid_common_id_data_s{
+ wwn_t port_name;
+ wwn_t node_name;
+};
+
+struct fc_rnid_general_topology_data_s{
+ u32 vendor_unique[4];
+ u32 asso_type;
+ u32 phy_port_num;
+ u32 num_attached_nodes;
+ u32 node_mgmt:8;
+ u32 ip_version:8;
+ u32 udp_tcp_port_num:16;
+ u32 ip_address[4];
+ u32 reserved:16;
+ u32 vendor_specific:16;
+};
+
+struct fc_rnid_acc_s{
+ struct fc_els_cmd_s els_cmd;
+ u32 node_id_data_format:8;
+ u32 common_id_data_length:8;
+ u32 reserved:8;
+ u32 specific_id_data_length:8;
+ struct fc_rnid_common_id_data_s common_id_data;
+ struct fc_rnid_general_topology_data_s gen_topology_data;
+};
+
+#define RNID_ASSOCIATED_TYPE_UNKNOWN 0x00000001
+#define RNID_ASSOCIATED_TYPE_OTHER 0x00000002
+#define RNID_ASSOCIATED_TYPE_HUB 0x00000003
+#define RNID_ASSOCIATED_TYPE_SWITCH 0x00000004
+#define RNID_ASSOCIATED_TYPE_GATEWAY 0x00000005
+#define RNID_ASSOCIATED_TYPE_STORAGE_DEVICE 0x00000009
+#define RNID_ASSOCIATED_TYPE_HOST 0x0000000A
+#define RNID_ASSOCIATED_TYPE_STORAGE_SUBSYSTEM 0x0000000B
+#define RNID_ASSOCIATED_TYPE_STORAGE_ACCESS_DEVICE 0x0000000E
+#define RNID_ASSOCIATED_TYPE_NAS_SERVER 0x00000011
+#define RNID_ASSOCIATED_TYPE_BRIDGE 0x00000002
+#define RNID_ASSOCIATED_TYPE_VIRTUALIZATION_DEVICE 0x00000003
+#define RNID_ASSOCIATED_TYPE_MULTI_FUNCTION_DEVICE 0x000000FF
+
+enum fc_rpsc_speed_cap{
+ RPSC_SPEED_CAP_1G = 0x8000,
+ RPSC_SPEED_CAP_2G = 0x4000,
+ RPSC_SPEED_CAP_4G = 0x2000,
+ RPSC_SPEED_CAP_10G = 0x1000,
+ RPSC_SPEED_CAP_8G = 0x0800,
+ RPSC_SPEED_CAP_16G = 0x0400,
+
+ RPSC_SPEED_CAP_UNKNOWN = 0x0001,
+};
+
+enum fc_rpsc_op_speed_s{
+ RPSC_OP_SPEED_1G = 0x8000,
+ RPSC_OP_SPEED_2G = 0x4000,
+ RPSC_OP_SPEED_4G = 0x2000,
+ RPSC_OP_SPEED_10G = 0x1000,
+ RPSC_OP_SPEED_8G = 0x0800,
+ RPSC_OP_SPEED_16G = 0x0400,
+
+ RPSC_OP_SPEED_NOT_EST = 0x0001, /*! speed not established */
+};
+
+struct fc_rpsc_speed_info_s{
+ u16 port_speed_cap; /*! see fc_rpsc_speed_cap_t */
+ u16 port_op_speed; /*! see fc_rpsc_op_speed_t */
+};
+
+enum link_e2e_beacon_subcmd{
+ LINK_E2E_BEACON_ON = 1,
+ LINK_E2E_BEACON_OFF = 2
+};
+
+enum beacon_type{
+ BEACON_TYPE_NORMAL = 1, /*! Normal Beaconing. Green */
+ BEACON_TYPE_WARN = 2, /*! Warning Beaconing. Yellow/Amber */
+ BEACON_TYPE_CRITICAL = 3 /*! Critical Beaconing. Red */
+};
+
+struct link_e2e_beacon_param_s {
+ u8 beacon_type; /* Beacon Type. See beacon_type_t */
+ u8 beacon_frequency;
+ /* Beacon frequency. Number of blinks
+ * per 10 seconds
+ */
+ u16 beacon_duration;/* Beacon duration (in Seconds). The
+ * command operation should be
+ * terminated at the end of this
+ * timeout value.
+ *
+ * Ignored if diag_sub_cmd is
+ * LINK_E2E_BEACON_OFF.
+ *
+ * If 0, beaconing will continue till a
+ * BEACON OFF request is received
+ */
+};
+
+/*
+ * Link E2E beacon request/good response format. For LS_RJTs use fc_ls_rjt_t
+ */
+struct link_e2e_beacon_req_s{
+ u32 ls_code; /*! FC_ELS_E2E_LBEACON in requests *
+ *or FC_ELS_ACC in good replies */
+ u32 ls_sub_cmd; /*! See link_e2e_beacon_subcmd_t */
+ struct link_e2e_beacon_param_s beacon_parm;
+};
+
+/**
+ * If RPSC request is sent to the Domain Controller, the request is for
+ * all the ports within that domain (TODO - I don't think FOS implements
+ * this...).
+ */
+struct fc_rpsc_cmd_s{
+ struct fc_els_cmd_s els_cmd;
+};
+
+/*
+ * RPSC Acc
+ */
+struct fc_rpsc_acc_s{
+ u32 command:8;
+ u32 rsvd:8;
+ u32 num_entries:16;
+
+ struct fc_rpsc_speed_info_s speed_info[1];
+};
+
+/**
+ * If RPSC2 request is sent to the Domain Controller,
+ */
+#define FC_BRCD_TOKEN 0x42524344
+
+struct fc_rpsc2_cmd_s{
+ struct fc_els_cmd_s els_cmd;
+ u32 token;
+ u16 resvd;
+ u16 num_pids; /* Number of pids in the request */
+ struct {
+ u32 rsvd1:8;
+ u32 pid:24; /* port identifier */
+ } pid_list[1];
+};
+
+enum fc_rpsc2_port_type{
+ RPSC2_PORT_TYPE_UNKNOWN = 0,
+ RPSC2_PORT_TYPE_NPORT = 1,
+ RPSC2_PORT_TYPE_NLPORT = 2,
+ RPSC2_PORT_TYPE_NPIV_PORT = 0x5f,
+ RPSC2_PORT_TYPE_NPORT_TRUNK = 0x6f,
+};
+
+/*
+ * RPSC2 portInfo entry structure
+ */
+struct fc_rpsc2_port_info_s{
+ u32 pid; /* PID */
+ u16 resvd1;
+ u16 index; /* port number / index */
+ u8 resvd2;
+ u8 type; /* port type N/NL/... */
+ u16 speed; /* port Operating Speed */
+};
+
+/*
+ * RPSC2 Accept payload
+ */
+struct fc_rpsc2_acc_s{
+ u8 els_cmd;
+ u8 resvd;
+ u16 num_pids; /* Number of pids in the request */
+ struct fc_rpsc2_port_info_s port_info[1]; /* port information */
+};
+
+/**
+ * bit fields so that multiple classes can be specified
+ */
+enum fc_cos{
+ FC_CLASS_2 = 0x04,
+ FC_CLASS_3 = 0x08,
+ FC_CLASS_2_3 = 0x0C,
+};
+
+/*
+ * symbolic name
+ */
+struct fc_symname_s{
+ u8 symname[FC_SYMNAME_MAX];
+};
+
+struct fc_alpabm_s{
+ u8 alpa_bm[FC_ALPA_MAX / 8];
+};
+
+/*
+ * protocol default timeout values
+ */
+#define FC_ED_TOV 2
+#define FC_REC_TOV (FC_ED_TOV + 1)
+#define FC_RA_TOV 10
+#define FC_ELS_TOV (2 * FC_RA_TOV)
+
+/*
+ * virtual fabric related defines
+ */
+#define FC_VF_ID_NULL 0 /* must not be used as VF_ID */
+#define FC_VF_ID_MIN 1
+#define FC_VF_ID_MAX 0xEFF
+#define FC_VF_ID_CTL 0xFEF /* control VF_ID */
+
+/**
+ * Virtual Fabric Tagging header format
+ * @caution This is defined only in BIG ENDIAN format.
+ */
+struct fc_vft_s{
+ u32 r_ctl:8;
+ u32 ver:2;
+ u32 type:4;
+ u32 res_a:2;
+ u32 priority:3;
+ u32 vf_id:12;
+ u32 res_b:1;
+ u32 hopct:8;
+ u32 res_c:24;
+};
+
+#pragma pack()
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FC_SP_H__
+#define __FC_SP_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+enum auth_els_flags{
+ FC_AUTH_ELS_MORE_FRAGS_FLAG = 0x80, /*! bit-7. More Fragments
+ * Follow
+ */
+ FC_AUTH_ELS_CONCAT_FLAG = 0x40, /*! bit-6. Concatenation Flag */
+ FC_AUTH_ELS_SEQ_NUM_FLAG = 0x01 /*! bit-0. Sequence Number */
+};
+
+enum auth_msg_codes{
+ FC_AUTH_MC_AUTH_RJT = 0x0A, /*! Auth Reject */
+ FC_AUTH_MC_AUTH_NEG = 0x0B, /*! Auth Negotiate */
+ FC_AUTH_MC_AUTH_DONE = 0x0C, /*! Auth Done */
+
+ FC_AUTH_MC_DHCHAP_CHAL = 0x10, /*! DHCHAP Challenge */
+ FC_AUTH_MC_DHCHAP_REPLY = 0x11, /*! DHCHAP Reply */
+ FC_AUTH_MC_DHCHAP_SUCC = 0x12, /*! DHCHAP Success */
+
+ FC_AUTH_MC_FCAP_REQ = 0x13, /*! FCAP Request */
+ FC_AUTH_MC_FCAP_ACK = 0x14, /*! FCAP Acknowledge */
+ FC_AUTH_MC_FCAP_CONF = 0x15, /*! FCAP Confirm */
+
+ FC_AUTH_MC_FCPAP_INIT = 0x16, /*! FCPAP Init */
+ FC_AUTH_MC_FCPAP_ACC = 0x17, /*! FCPAP Accept */
+ FC_AUTH_MC_FCPAP_COMP = 0x18, /*! FCPAP Complete */
+
+ FC_AUTH_MC_IKE_SA_INIT = 0x22, /*! IKE SA INIT */
+ FC_AUTH_MC_IKE_SA_AUTH = 0x23, /*! IKE SA Auth */
+ FC_AUTH_MC_IKE_CREATE_CHILD_SA = 0x24, /*! IKE Create Child SA */
+ FC_AUTH_MC_IKE_INFO = 0x25, /*! IKE informational */
+};
+
+enum auth_proto_version{
+ FC_AUTH_PROTO_VER_1 = 1, /*! Protocol Version 1 */
+};
+
+enum {
+ FC_AUTH_ELS_COMMAND_CODE = 0x90,/*! Authentication ELS Command code */
+ FC_AUTH_PROTO_PARAM_LEN_SZ = 4, /*! Size of Proto Parameter Len Field */
+ FC_AUTH_PROTO_PARAM_VAL_SZ = 4, /*! Size of Proto Parameter Val Field */
+ FC_MAX_AUTH_SECRET_LEN = 256,
+ /*! Maximum secret string length */
+ FC_AUTH_NUM_USABLE_PROTO_LEN_SZ = 4,
+ /*! Size of usable protocols field */
+ FC_AUTH_RESP_VALUE_LEN_SZ = 4,
+ /*! Size of response value length */
+ FC_MAX_CHAP_KEY_LEN = 256, /*! Maximum md5 digest length */
+ FC_MAX_AUTH_RETRIES = 3, /*! Maximum number of retries */
+ FC_MD5_DIGEST_LEN = 16, /*! MD5 digest length */
+ FC_SHA1_DIGEST_LEN = 20, /*! SHA1 digest length */
+ FC_MAX_DHG_SUPPORTED = 1, /*! Maximum DH Groups supported */
+ FC_MAX_ALG_SUPPORTED = 1, /*! Maximum algorithms supported */
+ FC_MAX_PROTO_SUPPORTED = 1, /*! Maximum protocols supported */
+ FC_START_TXN_ID = 2, /*! Starting transaction ID */
+};
+
+enum auth_proto_id{
+ FC_AUTH_PROTO_DHCHAP = 0x00000001,
+ FC_AUTH_PROTO_FCAP = 0x00000002,
+ FC_AUTH_PROTO_FCPAP = 0x00000003,
+ FC_AUTH_PROTO_IKEv2 = 0x00000004,
+ FC_AUTH_PROTO_IKEv2_AUTH = 0x00000005,
+};
+
+struct auth_name_s{
+ u16 name_tag; /*! Name Tag = 1 for Authentication */
+ u16 name_len; /*! Name Length = 8 for Authentication
+ */
+ wwn_t name; /*! Name. TODO - is this PWWN */
+};
+
+
+enum auth_hash_func{
+ FC_AUTH_HASH_FUNC_MD5 = 0x00000005,
+ FC_AUTH_HASH_FUNC_SHA_1 = 0x00000006,
+};
+
+enum auth_dh_gid{
+ FC_AUTH_DH_GID_0_DHG_NULL = 0x00000000,
+ FC_AUTH_DH_GID_1_DHG_1024 = 0x00000001,
+ FC_AUTH_DH_GID_2_DHG_1280 = 0x00000002,
+ FC_AUTH_DH_GID_3_DHG_1536 = 0x00000003,
+ FC_AUTH_DH_GID_4_DHG_2048 = 0x00000004,
+ FC_AUTH_DH_GID_6_DHG_3072 = 0x00000006,
+ FC_AUTH_DH_GID_7_DHG_4096 = 0x00000007,
+ FC_AUTH_DH_GID_8_DHG_6144 = 0x00000008,
+ FC_AUTH_DH_GID_9_DHG_8192 = 0x00000009,
+};
+
+struct auth_els_msg_s {
+ u8 auth_els_code; /* Authentication ELS Code (0x90) */
+ u8 auth_els_flag; /* Authentication ELS Flags */
+ u8 auth_msg_code; /* Authentication Message Code */
+ u8 proto_version; /* Protocol Version */
+ u32 msg_len; /* Message Length */
+ u32 trans_id; /* Transaction Identifier (T_ID) */
+
+ /* Msg payload follows... */
+};
+
+
+enum auth_neg_param_tags {
+ FC_AUTH_NEG_DHCHAP_HASHLIST = 0x0001,
+ FC_AUTH_NEG_DHCHAP_DHG_ID_LIST = 0x0002,
+};
+
+
+struct dhchap_param_format_s {
+ u16 tag; /*! Parameter Tag. See
+ * auth_neg_param_tags_t
+ */
+ u16 word_cnt;
+
+ /* followed by variable length parameter value... */
+};
+
+struct auth_proto_params_s {
+ u32 proto_param_len;
+ u32 proto_id;
+
+ /*
+ * Followed by variable length Protocol specific parameters. DH-CHAP
+ * uses dhchap_param_format_t
+ */
+};
+
+struct auth_neg_msg_s {
+ struct auth_name_s auth_ini_name;
+ u32 usable_auth_protos;
+ struct auth_proto_params_s proto_params[1]; /*! (1..usable_auth_proto)
+ * protocol params
+ */
+};
+
+struct auth_dh_val_s {
+ u32 dh_val_len;
+ u32 dh_val[1];
+};
+
+struct auth_dhchap_chal_msg_s {
+ struct auth_els_msg_s hdr;
+ struct auth_name_s auth_responder_name; /* TODO VRK - is auth_name_t
+ * type OK?
+ */
+ u32 hash_id;
+ u32 dh_grp_id;
+ u32 chal_val_len;
+ char chal_val[1];
+
+ /* ...followed by variable Challenge length/value and DH length/value */
+};
+
+
+enum auth_rjt_codes {
+ FC_AUTH_RJT_CODE_AUTH_FAILURE = 0x01,
+ FC_AUTH_RJT_CODE_LOGICAL_ERR = 0x02,
+};
+
+enum auth_rjt_code_exps {
+ FC_AUTH_CEXP_AUTH_MECH_NOT_USABLE = 0x01,
+ FC_AUTH_CEXP_DH_GROUP_NOT_USABLE = 0x02,
+ FC_AUTH_CEXP_HASH_FUNC_NOT_USABLE = 0x03,
+ FC_AUTH_CEXP_AUTH_XACT_STARTED = 0x04,
+ FC_AUTH_CEXP_AUTH_FAILED = 0x05,
+ FC_AUTH_CEXP_INCORRECT_PLD = 0x06,
+ FC_AUTH_CEXP_INCORRECT_PROTO_MSG = 0x07,
+ FC_AUTH_CEXP_RESTART_AUTH_PROTO = 0x08,
+ FC_AUTH_CEXP_AUTH_CONCAT_NOT_SUPP = 0x09,
+ FC_AUTH_CEXP_PROTO_VER_NOT_SUPP = 0x0A,
+};
+
+enum auth_status {
+ FC_AUTH_STATE_INPROGRESS = 0, /*! authentication in progress */
+ FC_AUTH_STATE_FAILED = 1, /*! authentication failed */
+ FC_AUTH_STATE_SUCCESS = 2 /*! authentication successful */
+};
+
+struct auth_rjt_msg_s {
+ struct auth_els_msg_s hdr;
+ u8 reason_code;
+ u8 reason_code_exp;
+ u8 rsvd[2];
+};
+
+
+struct auth_dhchap_neg_msg_s {
+ struct auth_els_msg_s hdr;
+ struct auth_neg_msg_s nego;
+};
+
+struct auth_dhchap_reply_msg_s {
+ struct auth_els_msg_s hdr;
+
+ /*
+ * followed by response value length & Value + DH Value Length & Value
+ */
+};
+
+#pragma pack()
+
+#endif /* __FC_SP_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FCPPROTO_H__
+#define __FCPPROTO_H__
+
+#include <protocol/scsi.h>
+
+#pragma pack(1)
+
+enum {
+ FCP_RJT = 0x01000000, /* SRR reject */
+ FCP_SRR_ACCEPT = 0x02000000, /* SRR accept */
+ FCP_SRR = 0x14000000, /* Sequence Retransmission Request */
+};
+
+/*
+ * SRR FC-4 LS payload
+ */
+struct fc_srr_s{
+ u32 ls_cmd;
+ u32 ox_id:16; /* ox-id */
+ u32 rx_id:16; /* rx-id */
+ u32 ro; /* relative offset */
+ u32 r_ctl:8; /* R_CTL for I.U. */
+ u32 res:24;
+};
+
+
+/*
+ * FCP_CMND definitions
+ */
+#define FCP_CMND_CDB_LEN 16
+#define FCP_CMND_LUN_LEN 8
+
+struct fcp_cmnd_s{
+ lun_t lun; /* 64-bit LU number */
+ u8 crn; /* command reference number */
+#ifdef __BIGENDIAN
+ u8 resvd:1,
+ priority:4, /* FCP-3: SAM-3 priority */
+ taskattr:3; /* scsi task attribute */
+#else
+ u8 taskattr:3, /* scsi task attribute */
+ priority:4, /* FCP-3: SAM-3 priority */
+ resvd:1;
+#endif
+ u8 tm_flags; /* task management flags */
+#ifdef __BIGENDIAN
+ u8 addl_cdb_len:6, /* additional CDB length words */
+ iodir:2; /* read/write FCP_DATA IUs */
+#else
+ u8 iodir:2, /* read/write FCP_DATA IUs */
+ addl_cdb_len:6; /* additional CDB length */
+#endif
+ struct scsi_cdb_s cdb;
+
+ /*
+ * !!! additional cdb bytes follows here!!!
+ */
+ u32 fcp_dl; /* bytes to be transferred */
+};
+
+#define fcp_cmnd_cdb_len(_cmnd) ((_cmnd)->addl_cdb_len * 4 + FCP_CMND_CDB_LEN)
+#define fcp_cmnd_fcpdl(_cmnd) ((&(_cmnd)->fcp_dl)[(_cmnd)->addl_cdb_len])
+
+/*
+ * fcp_cmnd_t.iodir field values
+ */
+enum fcp_iodir{
+ FCP_IODIR_NONE = 0,
+ FCP_IODIR_WRITE = 1,
+ FCP_IODIR_READ = 2,
+ FCP_IODIR_RW = 3,
+};
+
+/*
+ * Task attribute field
+ */
+enum {
+ FCP_TASK_ATTR_SIMPLE = 0,
+ FCP_TASK_ATTR_HOQ = 1,
+ FCP_TASK_ATTR_ORDERED = 2,
+ FCP_TASK_ATTR_ACA = 4,
+ FCP_TASK_ATTR_UNTAGGED = 5, /* obsolete in FCP-3 */
+};
+
+/*
+ * Task management flags field - only one bit shall be set
+ */
+#ifndef BIT
+#define BIT(_x) (1 << (_x))
+#endif
+enum fcp_tm_cmnd{
+ FCP_TM_ABORT_TASK_SET = BIT(1),
+ FCP_TM_CLEAR_TASK_SET = BIT(2),
+ FCP_TM_LUN_RESET = BIT(4),
+ FCP_TM_TARGET_RESET = BIT(5), /* obsolete in FCP-3 */
+ FCP_TM_CLEAR_ACA = BIT(6),
+};
+
+/*
+ * FCP_XFER_RDY IU defines
+ */
+struct fcp_xfer_rdy_s{
+ u32 data_ro;
+ u32 burst_len;
+ u32 reserved;
+};
+
+/*
+ * FCP_RSP residue flags
+ */
+enum fcp_residue{
+ FCP_NO_RESIDUE = 0, /* no residue */
+ FCP_RESID_OVER = 1, /* more data left that was not sent */
+ FCP_RESID_UNDER = 2, /* less data than requested */
+};
+
+enum {
+ FCP_RSPINFO_GOOD = 0,
+ FCP_RSPINFO_DATALEN_MISMATCH = 1,
+ FCP_RSPINFO_CMND_INVALID = 2,
+ FCP_RSPINFO_ROLEN_MISMATCH = 3,
+ FCP_RSPINFO_TM_NOT_SUPP = 4,
+ FCP_RSPINFO_TM_FAILED = 5,
+};
+
+struct fcp_rspinfo_s{
+ u32 res0:24;
+ u32 rsp_code:8; /* response code (as above) */
+ u32 res1;
+};
+
+struct fcp_resp_s{
+ u32 reserved[2]; /* 2 words reserved */
+ u16 reserved2;
+#ifdef __BIGENDIAN
+ u8 reserved3:3;
+ u8 fcp_conf_req:1; /* FCP_CONF is requested */
+ u8 resid_flags:2; /* underflow/overflow */
+ u8 sns_len_valid:1;/* sense len is valid */
+ u8 rsp_len_valid:1;/* response len is valid */
+#else
+ u8 rsp_len_valid:1;/* response len is valid */
+ u8 sns_len_valid:1;/* sense len is valid */
+ u8 resid_flags:2; /* underflow/overflow */
+ u8 fcp_conf_req:1; /* FCP_CONF is requested */
+ u8 reserved3:3;
+#endif
+ u8 scsi_status; /* one byte SCSI status */
+ u32 residue; /* residual data bytes */
+ u32 sns_len; /* length od sense info */
+ u32 rsp_len; /* length of response info */
+};
+
+#define fcp_snslen(__fcprsp) ((__fcprsp)->sns_len_valid ? \
+ (__fcprsp)->sns_len : 0)
+#define fcp_rsplen(__fcprsp) ((__fcprsp)->rsp_len_valid ? \
+ (__fcprsp)->rsp_len : 0)
+#define fcp_rspinfo(__fcprsp) ((struct fcp_rspinfo_s *)((__fcprsp) + 1))
+#define fcp_snsinfo(__fcprsp) (((u8 *)fcp_rspinfo(__fcprsp)) + \
+ fcp_rsplen(__fcprsp))
+
+struct fcp_cmnd_fr_s{
+ struct fchs_s fchs;
+ struct fcp_cmnd_s fcp;
+};
+
+#pragma pack()
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __FDMI_H__
+#define __FDMI_H__
+
+#include <protocol/types.h>
+#include <protocol/fc.h>
+#include <protocol/ct.h>
+
+#pragma pack(1)
+
+/*
+ * FDMI Command Codes
+ */
+#define FDMI_GRHL 0x0100
+#define FDMI_GHAT 0x0101
+#define FDMI_GRPL 0x0102
+#define FDMI_GPAT 0x0110
+#define FDMI_RHBA 0x0200
+#define FDMI_RHAT 0x0201
+#define FDMI_RPRT 0x0210
+#define FDMI_RPA 0x0211
+#define FDMI_DHBA 0x0300
+#define FDMI_DPRT 0x0310
+
+/*
+ * FDMI reason codes
+ */
+#define FDMI_NO_ADDITIONAL_EXP 0x00
+#define FDMI_HBA_ALREADY_REG 0x10
+#define FDMI_HBA_ATTRIB_NOT_REG 0x11
+#define FDMI_HBA_ATTRIB_MULTIPLE 0x12
+#define FDMI_HBA_ATTRIB_LENGTH_INVALID 0x13
+#define FDMI_HBA_ATTRIB_NOT_PRESENT 0x14
+#define FDMI_PORT_ORIG_NOT_IN_LIST 0x15
+#define FDMI_PORT_HBA_NOT_IN_LIST 0x16
+#define FDMI_PORT_ATTRIB_NOT_REG 0x20
+#define FDMI_PORT_NOT_REG 0x21
+#define FDMI_PORT_ATTRIB_MULTIPLE 0x22
+#define FDMI_PORT_ATTRIB_LENGTH_INVALID 0x23
+#define FDMI_PORT_ALREADY_REGISTEREED 0x24
+
+/*
+ * FDMI Transmission Speed Mask values
+ */
+#define FDMI_TRANS_SPEED_1G 0x00000001
+#define FDMI_TRANS_SPEED_2G 0x00000002
+#define FDMI_TRANS_SPEED_10G 0x00000004
+#define FDMI_TRANS_SPEED_4G 0x00000008
+#define FDMI_TRANS_SPEED_8G 0x00000010
+#define FDMI_TRANS_SPEED_16G 0x00000020
+#define FDMI_TRANS_SPEED_UNKNOWN 0x00008000
+
+/*
+ * FDMI HBA attribute types
+ */
+enum fdmi_hba_attribute_type {
+ FDMI_HBA_ATTRIB_NODENAME = 1, /* 0x0001 */
+ FDMI_HBA_ATTRIB_MANUFACTURER, /* 0x0002 */
+ FDMI_HBA_ATTRIB_SERIALNUM, /* 0x0003 */
+ FDMI_HBA_ATTRIB_MODEL, /* 0x0004 */
+ FDMI_HBA_ATTRIB_MODEL_DESC, /* 0x0005 */
+ FDMI_HBA_ATTRIB_HW_VERSION, /* 0x0006 */
+ FDMI_HBA_ATTRIB_DRIVER_VERSION, /* 0x0007 */
+ FDMI_HBA_ATTRIB_ROM_VERSION, /* 0x0008 */
+ FDMI_HBA_ATTRIB_FW_VERSION, /* 0x0009 */
+ FDMI_HBA_ATTRIB_OS_NAME, /* 0x000A */
+ FDMI_HBA_ATTRIB_MAX_CT, /* 0x000B */
+
+ FDMI_HBA_ATTRIB_MAX_TYPE
+};
+
+/*
+ * FDMI Port attribute types
+ */
+enum fdmi_port_attribute_type {
+ FDMI_PORT_ATTRIB_FC4_TYPES = 1, /* 0x0001 */
+ FDMI_PORT_ATTRIB_SUPP_SPEED, /* 0x0002 */
+ FDMI_PORT_ATTRIB_PORT_SPEED, /* 0x0003 */
+ FDMI_PORT_ATTRIB_FRAME_SIZE, /* 0x0004 */
+ FDMI_PORT_ATTRIB_DEV_NAME, /* 0x0005 */
+ FDMI_PORT_ATTRIB_HOST_NAME, /* 0x0006 */
+
+ FDMI_PORT_ATTR_MAX_TYPE
+};
+
+/*
+ * FDMI attribute
+ */
+struct fdmi_attr_s {
+ u16 type;
+ u16 len;
+ u8 value[1];
+};
+
+/*
+ * HBA Attribute Block
+ */
+struct fdmi_hba_attr_s {
+ u32 attr_count; /* # of attributes */
+ struct fdmi_attr_s hba_attr; /* n attributes */
+};
+
+/*
+ * Registered Port List
+ */
+struct fdmi_port_list_s {
+ u32 num_ports; /* number Of Port Entries */
+ wwn_t port_entry; /* one or more */
+};
+
+/*
+ * Port Attribute Block
+ */
+struct fdmi_port_attr_s {
+ u32 attr_count; /* # of attributes */
+ struct fdmi_attr_s port_attr; /* n attributes */
+};
+
+/*
+ * FDMI Register HBA Attributes
+ */
+struct fdmi_rhba_s {
+ wwn_t hba_id; /* HBA Identifier */
+ struct fdmi_port_list_s port_list; /* Registered Port List */
+ struct fdmi_hba_attr_s hba_attr_blk; /* HBA attribute block */
+};
+
+/*
+ * FDMI Register Port
+ */
+struct fdmi_rprt_s {
+ wwn_t hba_id; /* HBA Identifier */
+ wwn_t port_name; /* Port wwn */
+ struct fdmi_port_attr_s port_attr_blk; /* Port Attr Block */
+};
+
+/*
+ * FDMI Register Port Attributes
+ */
+struct fdmi_rpa_s {
+ wwn_t port_name; /* port wwn */
+ struct fdmi_port_attr_s port_attr_blk; /* Port Attr Block */
+};
+
+#pragma pack()
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * pcifw.h PCI FW related headers
+ */
+
+#ifndef __PCIFW_H__
+#define __PCIFW_H__
+
+#pragma pack(1)
+
+struct pnp_hdr_s{
+ u32 signature; /* "$PnP" */
+ u8 rev; /* Struct revision */
+ u8 len; /* Header structure len in multiples
+ * of 16 bytes */
+ u16 off; /* Offset to next header 00 if none */
+ u8 rsvd; /* Reserved byte */
+ u8 cksum; /* 8-bit checksum for this header */
+ u32 pnp_dev_id; /* PnP Device Id */
+ u16 mfstr; /* Pointer to manufacturer string */
+ u16 prstr; /* Pointer to product string */
+ u8 devtype[3]; /* Device Type Code */
+ u8 devind; /* Device Indicator */
+ u16 bcventr; /* Bootstrap entry vector */
+ u16 rsvd2; /* Reserved */
+ u16 sriv; /* Static resource information vector */
+};
+
+struct pci_3_0_ds_s{
+ u32 sig; /* Signature "PCIR" */
+ u16 vendid; /* Vendor ID */
+ u16 devid; /* Device ID */
+ u16 devlistoff; /* Device List Offset */
+ u16 len; /* PCI Data Structure Length */
+ u8 rev; /* PCI Data Structure Revision */
+ u8 clcode[3]; /* Class Code */
+ u16 imglen; /* Code image length in multiples of
+ * 512 bytes */
+ u16 coderev; /* Revision level of code/data */
+ u8 codetype; /* Code type 0x00 - BIOS */
+ u8 indr; /* Last image indicator */
+ u16 mrtimglen; /* Max Run Time Image Length */
+ u16 cuoff; /* Config Utility Code Header Offset */
+ u16 dmtfclp; /* DMTF CLP entry point offset */
+};
+
+struct pci_optrom_hdr_s{
+ u16 sig; /* Signature 0x55AA */
+ u8 len; /* Option ROM length in units of 512 bytes */
+ u8 inivec[3]; /* Initialization vector */
+ u8 rsvd[16]; /* Reserved field */
+ u16 verptr; /* Pointer to version string - private */
+ u16 pcids; /* Pointer to PCI data structure */
+ u16 pnphdr; /* Pointer to PnP expansion header */
+};
+
+#pragma pack()
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __SCSI_H__
+#define __SCSI_H__
+
+#include <protocol/types.h>
+
+#pragma pack(1)
+
+/*
+ * generic SCSI cdb definition
+ */
+#define SCSI_MAX_CDBLEN 16
+struct scsi_cdb_s{
+ u8 scsi_cdb[SCSI_MAX_CDBLEN];
+};
+
+/*
+ * scsi lun serial number definition
+ */
+#define SCSI_LUN_SN_LEN 32
+struct scsi_lun_sn_s{
+ u8 lun_sn[SCSI_LUN_SN_LEN];
+};
+
+/*
+ * SCSI Direct Access Commands
+ */
+enum {
+ SCSI_OP_TEST_UNIT_READY = 0x00,
+ SCSI_OP_REQUEST_SENSE = 0x03,
+ SCSI_OP_FORMAT_UNIT = 0x04,
+ SCSI_OP_READ6 = 0x08,
+ SCSI_OP_WRITE6 = 0x0A,
+ SCSI_OP_WRITE_FILEMARKS = 0x10,
+ SCSI_OP_INQUIRY = 0x12,
+ SCSI_OP_MODE_SELECT6 = 0x15,
+ SCSI_OP_RESERVE6 = 0x16,
+ SCSI_OP_RELEASE6 = 0x17,
+ SCSI_OP_MODE_SENSE6 = 0x1A,
+ SCSI_OP_START_STOP_UNIT = 0x1B,
+ SCSI_OP_SEND_DIAGNOSTIC = 0x1D,
+ SCSI_OP_READ_CAPACITY = 0x25,
+ SCSI_OP_READ10 = 0x28,
+ SCSI_OP_WRITE10 = 0x2A,
+ SCSI_OP_VERIFY10 = 0x2F,
+ SCSI_OP_READ_DEFECT_DATA = 0x37,
+ SCSI_OP_LOG_SELECT = 0x4C,
+ SCSI_OP_LOG_SENSE = 0x4D,
+ SCSI_OP_MODE_SELECT10 = 0x55,
+ SCSI_OP_RESERVE10 = 0x56,
+ SCSI_OP_RELEASE10 = 0x57,
+ SCSI_OP_MODE_SENSE10 = 0x5A,
+ SCSI_OP_PER_RESERVE_IN = 0x5E,
+ SCSI_OP_PER_RESERVE_OUR = 0x5E,
+ SCSI_OP_READ16 = 0x88,
+ SCSI_OP_WRITE16 = 0x8A,
+ SCSI_OP_VERIFY16 = 0x8F,
+ SCSI_OP_READ_CAPACITY16 = 0x9E,
+ SCSI_OP_REPORT_LUNS = 0xA0,
+ SCSI_OP_READ12 = 0xA8,
+ SCSI_OP_WRITE12 = 0xAA,
+ SCSI_OP_UNDEF = 0xFF,
+};
+
+/*
+ * SCSI START_STOP_UNIT command
+ */
+struct scsi_start_stop_unit_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 reserved1:4;
+ u8 immed:1;
+#else
+ u8 immed:1;
+ u8 reserved1:4;
+ u8 lun:3;
+#endif
+ u8 reserved2;
+ u8 reserved3;
+#ifdef __BIGENDIAN
+ u8 power_conditions:4;
+ u8 reserved4:2;
+ u8 loEj:1;
+ u8 start:1;
+#else
+ u8 start:1;
+ u8 loEj:1;
+ u8 reserved4:2;
+ u8 power_conditions:4;
+#endif
+ u8 control;
+};
+
+/*
+ * SCSI SEND_DIAGNOSTIC command
+ */
+struct scsi_send_diagnostic_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 self_test_code:3;
+ u8 pf:1;
+ u8 reserved1:1;
+ u8 self_test:1;
+ u8 dev_offl:1;
+ u8 unit_offl:1;
+#else
+ u8 unit_offl:1;
+ u8 dev_offl:1;
+ u8 self_test:1;
+ u8 reserved1:1;
+ u8 pf:1;
+ u8 self_test_code:3;
+#endif
+ u8 reserved2;
+
+ u8 param_list_length[2]; /* MSB first */
+ u8 control;
+
+};
+
+/*
+ * SCSI READ10/WRITE10 commands
+ */
+struct scsi_rw10_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 dpo:1; /* Disable Page Out */
+ u8 fua:1; /* Force Unit Access */
+ u8 reserved1:2;
+ u8 rel_adr:1; /* relative address */
+#else
+ u8 rel_adr:1;
+ u8 reserved1:2;
+ u8 fua:1;
+ u8 dpo:1;
+ u8 lun:3;
+#endif
+ u8 lba0; /* logical block address - MSB */
+ u8 lba1;
+ u8 lba2;
+ u8 lba3; /* LSB */
+ u8 reserved3;
+ u8 xfer_length0; /* transfer length in blocks - MSB */
+ u8 xfer_length1; /* LSB */
+ u8 control;
+};
+
+#define SCSI_CDB10_GET_LBA(cdb) \
+ (((cdb)->lba0 << 24) | ((cdb)->lba1 << 16) | \
+ ((cdb)->lba2 << 8) | (cdb)->lba3)
+
+#define SCSI_CDB10_SET_LBA(cdb, lba) { \
+ (cdb)->lba0 = lba >> 24; \
+ (cdb)->lba1 = (lba >> 16) & 0xFF; \
+ (cdb)->lba2 = (lba >> 8) & 0xFF; \
+ (cdb)->lba3 = lba & 0xFF; \
+}
+
+#define SCSI_CDB10_GET_TL(cdb) \
+ ((cdb)->xfer_length0 << 8 | (cdb)->xfer_length1)
+#define SCSI_CDB10_SET_TL(cdb, tl) { \
+ (cdb)->xfer_length0 = tl >> 8; \
+ (cdb)->xfer_length1 = tl & 0xFF; \
+}
+
+/*
+ * SCSI READ6/WRITE6 commands
+ */
+struct scsi_rw6_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 lba0:5; /* MSb */
+#else
+ u8 lba0:5; /* MSb */
+ u8 lun:3;
+#endif
+ u8 lba1;
+ u8 lba2; /* LSB */
+ u8 xfer_length;
+ u8 control;
+};
+
+#define SCSI_TAPE_CDB6_GET_TL(cdb) \
+ (((cdb)->tl0 << 16) | ((cdb)->tl1 << 8) | (cdb)->tl2)
+
+#define SCSI_TAPE_CDB6_SET_TL(cdb, tl) { \
+ (cdb)->tl0 = tl >> 16; \
+ (cdb)->tl1 = (tl >> 8) & 0xFF; \
+ (cdb)->tl2 = tl & 0xFF; \
+}
+
+/*
+ * SCSI sequential (TAPE) wrtie command
+ */
+struct scsi_tape_wr_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 rsvd:7;
+ u8 fixed:1; /* MSb */
+#else
+ u8 fixed:1; /* MSb */
+ u8 rsvd:7;
+#endif
+ u8 tl0; /* Msb */
+ u8 tl1;
+ u8 tl2; /* Lsb */
+
+ u8 control;
+};
+
+#define SCSI_CDB6_GET_LBA(cdb) \
+ (((cdb)->lba0 << 16) | ((cdb)->lba1 << 8) | (cdb)->lba2)
+
+#define SCSI_CDB6_SET_LBA(cdb, lba) { \
+ (cdb)->lba0 = lba >> 16; \
+ (cdb)->lba1 = (lba >> 8) & 0xFF; \
+ (cdb)->lba2 = lba & 0xFF; \
+}
+
+#define SCSI_CDB6_GET_TL(cdb) ((cdb)->xfer_length)
+#define SCSI_CDB6_SET_TL(cdb, tl) { \
+ (cdb)->xfer_length = tl; \
+}
+
+/*
+ * SCSI sense data format
+ */
+struct scsi_sense_s{
+#ifdef __BIGENDIAN
+ u8 valid:1;
+ u8 rsp_code:7;
+#else
+ u8 rsp_code:7;
+ u8 valid:1;
+#endif
+ u8 seg_num;
+#ifdef __BIGENDIAN
+ u8 file_mark:1;
+ u8 eom:1; /* end of media */
+ u8 ili:1; /* incorrect length indicator */
+ u8 reserved:1;
+ u8 sense_key:4;
+#else
+ u8 sense_key:4;
+ u8 reserved:1;
+ u8 ili:1; /* incorrect length indicator */
+ u8 eom:1; /* end of media */
+ u8 file_mark:1;
+#endif
+ u8 information[4]; /* device-type or command specific info
+ */
+ u8 add_sense_length;
+ /* additional sense length */
+ u8 command_info[4];/* command specific information
+ */
+ u8 asc; /* additional sense code */
+ u8 ascq; /* additional sense code qualifier */
+ u8 fru_code; /* field replaceable unit code */
+#ifdef __BIGENDIAN
+ u8 sksv:1; /* sense key specific valid */
+ u8 c_d:1; /* command/data bit */
+ u8 res1:2;
+ u8 bpv:1; /* bit pointer valid */
+ u8 bpointer:3; /* bit pointer */
+#else
+ u8 bpointer:3; /* bit pointer */
+ u8 bpv:1; /* bit pointer valid */
+ u8 res1:2;
+ u8 c_d:1; /* command/data bit */
+ u8 sksv:1; /* sense key specific valid */
+#endif
+ u8 fpointer[2]; /* field pointer */
+};
+
+#define SCSI_SENSE_CUR_ERR 0x70
+#define SCSI_SENSE_DEF_ERR 0x71
+
+/*
+ * SCSI sense key values
+ */
+#define SCSI_SK_NO_SENSE 0x0
+#define SCSI_SK_REC_ERR 0x1 /* recovered error */
+#define SCSI_SK_NOT_READY 0x2
+#define SCSI_SK_MED_ERR 0x3 /* medium error */
+#define SCSI_SK_HW_ERR 0x4 /* hardware error */
+#define SCSI_SK_ILLEGAL_REQ 0x5
+#define SCSI_SK_UNIT_ATT 0x6 /* unit attention */
+#define SCSI_SK_DATA_PROTECT 0x7
+#define SCSI_SK_BLANK_CHECK 0x8
+#define SCSI_SK_VENDOR_SPEC 0x9
+#define SCSI_SK_COPY_ABORTED 0xA
+#define SCSI_SK_ABORTED_CMND 0xB
+#define SCSI_SK_VOL_OVERFLOW 0xD
+#define SCSI_SK_MISCOMPARE 0xE
+
+/*
+ * SCSI additional sense codes
+ */
+#define SCSI_ASC_NO_ADD_SENSE 0x00
+#define SCSI_ASC_LUN_NOT_READY 0x04
+#define SCSI_ASC_LUN_COMMUNICATION 0x08
+#define SCSI_ASC_WRITE_ERROR 0x0C
+#define SCSI_ASC_INVALID_CMND_CODE 0x20
+#define SCSI_ASC_BAD_LBA 0x21
+#define SCSI_ASC_INVALID_FIELD_IN_CDB 0x24
+#define SCSI_ASC_LUN_NOT_SUPPORTED 0x25
+#define SCSI_ASC_LUN_WRITE_PROTECT 0x27
+#define SCSI_ASC_POWERON_BDR 0x29 /* power on reset, bus reset,
+ * bus device reset
+ */
+#define SCSI_ASC_PARAMS_CHANGED 0x2A
+#define SCSI_ASC_CMND_CLEARED_BY_A_I 0x2F
+#define SCSI_ASC_SAVING_PARAM_NOTSUPP 0x39
+#define SCSI_ASC_TOCC 0x3F /* target operating condtions
+ * changed
+ */
+#define SCSI_ASC_PARITY_ERROR 0x47
+#define SCSI_ASC_CMND_PHASE_ERROR 0x4A
+#define SCSI_ASC_DATA_PHASE_ERROR 0x4B
+#define SCSI_ASC_VENDOR_SPEC 0x7F
+
+/*
+ * SCSI additional sense code qualifiers
+ */
+#define SCSI_ASCQ_CAUSE_NOT_REPORT 0x00
+#define SCSI_ASCQ_BECOMING_READY 0x01
+#define SCSI_ASCQ_INIT_CMD_REQ 0x02
+#define SCSI_ASCQ_FORMAT_IN_PROGRESS 0x04
+#define SCSI_ASCQ_OPERATION_IN_PROGRESS 0x07
+#define SCSI_ASCQ_SELF_TEST_IN_PROGRESS 0x09
+#define SCSI_ASCQ_WR_UNEXP_UNSOL_DATA 0x0C
+#define SCSI_ASCQ_WR_NOTENG_UNSOL_DATA 0x0D
+
+#define SCSI_ASCQ_LBA_OUT_OF_RANGE 0x00
+#define SCSI_ASCQ_INVALID_ELEMENT_ADDR 0x01
+
+#define SCSI_ASCQ_LUN_WRITE_PROTECTED 0x00
+#define SCSI_ASCQ_LUN_HW_WRITE_PROTECTED 0x01
+#define SCSI_ASCQ_LUN_SW_WRITE_PROTECTED 0x02
+
+#define SCSI_ASCQ_POR 0x01 /* power on reset */
+#define SCSI_ASCQ_SBR 0x02 /* scsi bus reset */
+#define SCSI_ASCQ_BDR 0x03 /* bus device reset */
+#define SCSI_ASCQ_DIR 0x04 /* device internal reset */
+
+#define SCSI_ASCQ_MODE_PARAMS_CHANGED 0x01
+#define SCSI_ASCQ_LOG_PARAMS_CHANGED 0x02
+#define SCSI_ASCQ_RESERVATIONS_PREEMPTED 0x03
+#define SCSI_ASCQ_RESERVATIONS_RELEASED 0x04
+#define SCSI_ASCQ_REGISTRATIONS_PREEMPTED 0x05
+
+#define SCSI_ASCQ_MICROCODE_CHANGED 0x01
+#define SCSI_ASCQ_CHANGED_OPER_COND 0x02
+#define SCSI_ASCQ_INQ_CHANGED 0x03 /* inquiry data changed */
+#define SCSI_ASCQ_DI_CHANGED 0x05 /* device id changed */
+#define SCSI_ASCQ_RL_DATA_CHANGED 0x0E /* report luns data changed */
+
+#define SCSI_ASCQ_DP_CRC_ERR 0x01 /* data phase crc error */
+#define SCSI_ASCQ_DP_SCSI_PARITY_ERR 0x02 /* data phase scsi parity error
+ */
+#define SCSI_ASCQ_IU_CRC_ERR 0x03 /* information unit crc error */
+#define SCSI_ASCQ_PROTO_SERV_CRC_ERR 0x05
+
+#define SCSI_ASCQ_LUN_TIME_OUT 0x01
+
+/* ------------------------------------------------------------
+ * SCSI INQUIRY
+ * ------------------------------------------------------------*/
+
+struct scsi_inquiry_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 reserved1:3;
+ u8 cmd_dt:1;
+ u8 evpd:1;
+#else
+ u8 evpd:1;
+ u8 cmd_dt:1;
+ u8 reserved1:3;
+ u8 lun:3;
+#endif
+ u8 page_code;
+ u8 reserved2;
+ u8 alloc_length;
+ u8 control;
+};
+
+struct scsi_inquiry_vendor_s{
+ u8 vendor_id[8];
+};
+
+struct scsi_inquiry_prodid_s{
+ u8 product_id[16];
+};
+
+struct scsi_inquiry_prodrev_s{
+ u8 product_rev[4];
+};
+
+struct scsi_inquiry_data_s{
+#ifdef __BIGENDIAN
+ u8 peripheral_qual:3; /* peripheral qualifier */
+ u8 device_type:5; /* peripheral device type */
+
+ u8 rmb:1; /* removable medium bit */
+ u8 device_type_mod:7; /* device type modifier */
+
+ u8 version;
+
+ u8 aenc:1; /* async event notification capability
+ */
+ u8 trm_iop:1; /* terminate I/O process */
+ u8 norm_aca:1; /* normal ACA supported */
+ u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */
+ u8 rsp_data_format:4;
+
+ u8 additional_len;
+ u8 sccs:1;
+ u8 reserved1:7;
+
+ u8 reserved2:1;
+ u8 enc_serv:1; /* enclosure service component */
+ u8 reserved3:1;
+ u8 multi_port:1; /* multi-port device */
+ u8 m_chngr:1; /* device in medium transport element */
+ u8 ack_req_q:1; /* SIP specific bit */
+ u8 addr32:1; /* SIP specific bit */
+ u8 addr16:1; /* SIP specific bit */
+
+ u8 rel_adr:1; /* relative address */
+ u8 w_bus32:1;
+ u8 w_bus16:1;
+ u8 synchronous:1;
+ u8 linked_commands:1;
+ u8 trans_dis:1;
+ u8 cmd_queue:1; /* command queueing supported */
+ u8 soft_reset:1; /* soft reset alternative (VS) */
+#else
+ u8 device_type:5; /* peripheral device type */
+ u8 peripheral_qual:3;
+ /* peripheral qualifier */
+
+ u8 device_type_mod:7;
+ /* device type modifier */
+ u8 rmb:1; /* removable medium bit */
+
+ u8 version;
+
+ u8 rsp_data_format:4;
+ u8 hi_support:1; /* SCSI-3: supports REPORT LUNS */
+ u8 norm_aca:1; /* normal ACA supported */
+ u8 terminate_iop:1;/* terminate I/O process */
+ u8 aenc:1; /* async event notification capability
+ */
+
+ u8 additional_len;
+ u8 reserved1:7;
+ u8 sccs:1;
+
+ u8 addr16:1; /* SIP specific bit */
+ u8 addr32:1; /* SIP specific bit */
+ u8 ack_req_q:1; /* SIP specific bit */
+ u8 m_chngr:1; /* device in medium transport element */
+ u8 multi_port:1; /* multi-port device */
+ u8 reserved3:1; /* TBD - Vendor Specific */
+ u8 enc_serv:1; /* enclosure service component */
+ u8 reserved2:1;
+
+ u8 soft_seset:1; /* soft reset alternative (VS) */
+ u8 cmd_queue:1; /* command queueing supported */
+ u8 trans_dis:1;
+ u8 linked_commands:1;
+ u8 synchronous:1;
+ u8 w_bus16:1;
+ u8 w_bus32:1;
+ u8 rel_adr:1; /* relative address */
+#endif
+ struct scsi_inquiry_vendor_s vendor_id;
+ struct scsi_inquiry_prodid_s product_id;
+ struct scsi_inquiry_prodrev_s product_rev;
+ u8 vendor_specific[20];
+ u8 reserved4[40];
+};
+
+/*
+ * inquiry.peripheral_qual field values
+ */
+#define SCSI_DEVQUAL_DEFAULT 0
+#define SCSI_DEVQUAL_NOT_CONNECTED 1
+#define SCSI_DEVQUAL_NOT_SUPPORTED 3
+
+/*
+ * inquiry.device_type field values
+ */
+#define SCSI_DEVICE_DIRECT_ACCESS 0x00
+#define SCSI_DEVICE_SEQ_ACCESS 0x01
+#define SCSI_DEVICE_ARRAY_CONTROLLER 0x0C
+#define SCSI_DEVICE_UNKNOWN 0x1F
+
+/*
+ * inquiry.version
+ */
+#define SCSI_VERSION_ANSI_X3131 2 /* ANSI X3.131 SCSI-2 */
+#define SCSI_VERSION_SPC 3 /* SPC (SCSI-3), ANSI X3.301:1997 */
+#define SCSI_VERSION_SPC_2 4 /* SPC-2 */
+
+/*
+ * response data format
+ */
+#define SCSI_RSP_DATA_FORMAT 2 /* SCSI-2 & SPC */
+
+/*
+ * SCSI inquiry page codes
+ */
+#define SCSI_INQ_PAGE_VPD_PAGES 0x00 /* supported vpd pages */
+#define SCSI_INQ_PAGE_USN_PAGE 0x80 /* unit serial number page */
+#define SCSI_INQ_PAGE_DEV_IDENT 0x83 /* device indentification page
+ */
+#define SCSI_INQ_PAGES_MAX 3
+
+/*
+ * supported vital product data pages
+ */
+struct scsi_inq_page_vpd_pages_s{
+#ifdef __BIGENDIAN
+ u8 peripheral_qual:3;
+ u8 device_type:5;
+#else
+ u8 device_type:5;
+ u8 peripheral_qual:3;
+#endif
+ u8 page_code;
+ u8 reserved;
+ u8 page_length;
+ u8 pages[SCSI_INQ_PAGES_MAX];
+};
+
+/*
+ * Unit serial number page
+ */
+#define SCSI_INQ_USN_LEN 32
+
+struct scsi_inq_usn_s{
+ char usn[SCSI_INQ_USN_LEN];
+};
+
+struct scsi_inq_page_usn_s{
+#ifdef __BIGENDIAN
+ u8 peripheral_qual:3;
+ u8 device_type:5;
+#else
+ u8 device_type:5;
+ u8 peripheral_qual:3;
+#endif
+ u8 page_code;
+ u8 reserved1;
+ u8 page_length;
+ struct scsi_inq_usn_s usn;
+};
+
+enum {
+ SCSI_INQ_DIP_CODE_BINARY = 1, /* identifier has binary value */
+ SCSI_INQ_DIP_CODE_ASCII = 2, /* identifier has ascii value */
+};
+
+enum {
+ SCSI_INQ_DIP_ASSOC_LUN = 0, /* id is associated with device */
+ SCSI_INQ_DIP_ASSOC_PORT = 1, /* id is associated with port that
+ * received the request
+ */
+};
+
+enum {
+ SCSI_INQ_ID_TYPE_VENDOR = 1,
+ SCSI_INQ_ID_TYPE_IEEE = 2,
+ SCSI_INQ_ID_TYPE_FC_FS = 3,
+ SCSI_INQ_ID_TYPE_OTHER = 4,
+};
+
+struct scsi_inq_dip_desc_s{
+#ifdef __BIGENDIAN
+ u8 res0:4;
+ u8 code_set:4;
+ u8 res1:2;
+ u8 association:2;
+ u8 id_type:4;
+#else
+ u8 code_set:4;
+ u8 res0:4;
+ u8 id_type:4;
+ u8 association:2;
+ u8 res1:2;
+#endif
+ u8 res2;
+ u8 id_len;
+ struct scsi_lun_sn_s id;
+};
+
+/*
+ * Device indentification page
+ */
+struct scsi_inq_page_dev_ident_s{
+#ifdef __BIGENDIAN
+ u8 peripheral_qual:3;
+ u8 device_type:5;
+#else
+ u8 device_type:5;
+ u8 peripheral_qual:3;
+#endif
+ u8 page_code;
+ u8 reserved1;
+ u8 page_length;
+ struct scsi_inq_dip_desc_s desc;
+};
+
+/* ------------------------------------------------------------
+ * READ CAPACITY
+ * ------------------------------------------------------------
+ */
+
+struct scsi_read_capacity_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 reserved1:4;
+ u8 rel_adr:1;
+#else
+ u8 rel_adr:1;
+ u8 reserved1:4;
+ u8 lun:3;
+#endif
+ u8 lba0; /* MSB */
+ u8 lba1;
+ u8 lba2;
+ u8 lba3; /* LSB */
+ u8 reserved2;
+ u8 reserved3;
+#ifdef __BIGENDIAN
+ u8 reserved4:7;
+ u8 pmi:1; /* partial medium indicator */
+#else
+ u8 pmi:1; /* partial medium indicator */
+ u8 reserved4:7;
+#endif
+ u8 control;
+};
+
+struct scsi_read_capacity_data_s{
+ u32 max_lba; /* maximum LBA available */
+ u32 block_length; /* in bytes */
+};
+
+struct scsi_read_capacity16_data_s{
+ u64 lba; /* maximum LBA available */
+ u32 block_length; /* in bytes */
+#ifdef __BIGENDIAN
+ u8 reserved1:4,
+ p_type:3,
+ prot_en:1;
+ u8 reserved2:4,
+ lb_pbe:4; /* logical blocks per physical block
+ * exponent */
+ u16 reserved3:2,
+ lba_align:14; /* lowest aligned logical block
+ * address */
+#else
+ u16 lba_align:14, /* lowest aligned logical block
+ * address */
+ reserved3:2;
+ u8 lb_pbe:4, /* logical blocks per physical block
+ * exponent */
+ reserved2:4;
+ u8 prot_en:1,
+ p_type:3,
+ reserved1:4;
+#endif
+ u64 reserved4;
+ u64 reserved5;
+};
+
+/* ------------------------------------------------------------
+ * REPORT LUNS command
+ * ------------------------------------------------------------
+ */
+
+struct scsi_report_luns_s{
+ u8 opcode; /* A0h - REPORT LUNS opCode */
+ u8 reserved1[5];
+ u8 alloc_length[4];/* allocation length MSB first */
+ u8 reserved2;
+ u8 control;
+};
+
+#define SCSI_REPORT_LUN_ALLOC_LENGTH(rl) \
+ ((rl->alloc_length[0] << 24) | (rl->alloc_length[1] << 16) | \
+ (rl->alloc_length[2] << 8) | (rl->alloc_length[3]))
+
+#define SCSI_REPORT_LUNS_SET_ALLOCLEN(rl, alloc_len) { \
+ (rl)->alloc_length[0] = (alloc_len) >> 24; \
+ (rl)->alloc_length[1] = ((alloc_len) >> 16) & 0xFF; \
+ (rl)->alloc_length[2] = ((alloc_len) >> 8) & 0xFF; \
+ (rl)->alloc_length[3] = (alloc_len) & 0xFF; \
+}
+
+struct scsi_report_luns_data_s{
+ u32 lun_list_length; /* length of LUN list length */
+ u32 reserved;
+ lun_t lun[1]; /* first LUN in lun list */
+};
+
+/* -------------------------------------------------------------
+ * SCSI mode parameters
+ * -----------------------------------------------------------
+ */
+enum {
+ SCSI_DA_MEDIUM_DEF = 0, /* direct access default medium type */
+ SCSI_DA_MEDIUM_SS = 1, /* direct access single sided */
+ SCSI_DA_MEDIUM_DS = 2, /* direct access double sided */
+};
+
+/*
+ * SCSI Mode Select(6) cdb
+ */
+struct scsi_mode_select6_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 pf:1; /* page format */
+ u8 reserved2:3;
+ u8 sp:1; /* save pages if set to 1 */
+#else
+ u8 sp:1; /* save pages if set to 1 */
+ u8 reserved2:3;
+ u8 pf:1; /* page format */
+ u8 reserved1:3;
+#endif
+ u8 reserved3[2];
+ u8 alloc_len;
+ u8 control;
+};
+
+/*
+ * SCSI Mode Select(10) cdb
+ */
+struct scsi_mode_select10_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 pf:1; /* page format */
+ u8 reserved2:3;
+ u8 sp:1; /* save pages if set to 1 */
+#else
+ u8 sp:1; /* save pages if set to 1 */
+ u8 reserved2:3;
+ u8 pf:1; /* page format */
+ u8 reserved1:3;
+#endif
+ u8 reserved3[5];
+ u8 alloc_len_msb;
+ u8 alloc_len_lsb;
+ u8 control;
+};
+
+/*
+ * SCSI Mode Sense(6) cdb
+ */
+struct scsi_mode_sense6_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:4;
+ u8 dbd:1; /* disable block discriptors if set to 1 */
+ u8 reserved2:3;
+
+ u8 pc:2; /* page control */
+ u8 page_code:6;
+#else
+ u8 reserved2:3;
+ u8 dbd:1; /* disable block descriptors if set to 1 */
+ u8 reserved1:4;
+
+ u8 page_code:6;
+ u8 pc:2; /* page control */
+#endif
+ u8 reserved3;
+ u8 alloc_len;
+ u8 control;
+};
+
+/*
+ * SCSI Mode Sense(10) cdb
+ */
+struct scsi_mode_sense10_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 LLBAA:1; /* long LBA accepted if set to 1 */
+ u8 dbd:1; /* disable block descriptors if set
+ * to 1
+ */
+ u8 reserved2:3;
+
+ u8 pc:2; /* page control */
+ u8 page_code:6;
+#else
+ u8 reserved2:3;
+ u8 dbd:1; /* disable block descriptors if set to
+ * 1
+ */
+ u8 LLBAA:1; /* long LBA accepted if set to 1 */
+ u8 reserved1:3;
+
+ u8 page_code:6;
+ u8 pc:2; /* page control */
+#endif
+ u8 reserved3[4];
+ u8 alloc_len_msb;
+ u8 alloc_len_lsb;
+ u8 control;
+};
+
+#define SCSI_CDB10_GET_AL(cdb) \
+ ((cdb)->alloc_len_msb << 8 | (cdb)->alloc_len_lsb)
+
+#define SCSI_CDB10_SET_AL(cdb, al) { \
+ (cdb)->alloc_len_msb = al >> 8; \
+ (cdb)->alloc_len_lsb = al & 0xFF; \
+}
+
+#define SCSI_CDB6_GET_AL(cdb) ((cdb)->alloc_len)
+
+#define SCSI_CDB6_SET_AL(cdb, al) { \
+ (cdb)->alloc_len = al; \
+}
+
+/*
+ * page control field values
+ */
+#define SCSI_PC_CURRENT_VALUES 0x0
+#define SCSI_PC_CHANGEABLE_VALUES 0x1
+#define SCSI_PC_DEFAULT_VALUES 0x2
+#define SCSI_PC_SAVED_VALUES 0x3
+
+/*
+ * SCSI mode page codes
+ */
+#define SCSI_MP_VENDOR_SPEC 0x00
+#define SCSI_MP_DISC_RECN 0x02 /* disconnect-reconnect page */
+#define SCSI_MP_FORMAT_DEVICE 0x03
+#define SCSI_MP_RDG 0x04 /* rigid disk geometry page */
+#define SCSI_MP_FDP 0x05 /* flexible disk page */
+#define SCSI_MP_CACHING 0x08 /* caching page */
+#define SCSI_MP_CONTROL 0x0A /* control mode page */
+#define SCSI_MP_MED_TYPES_SUP 0x0B /* medium types supported page */
+#define SCSI_MP_INFO_EXCP_CNTL 0x1C /* informational exception control */
+#define SCSI_MP_ALL 0x3F /* return all pages - mode sense only */
+
+/*
+ * mode parameter header
+ */
+struct scsi_mode_param_header6_s{
+ u8 mode_datalen;
+ u8 medium_type;
+
+ /*
+ * device specific parameters expanded for direct access devices
+ */
+#ifdef __BIGENDIAN
+ u32 wp:1; /* write protected */
+ u32 reserved1:2;
+ u32 dpofua:1; /* disable page out + force unit access
+ */
+ u32 reserved2:4;
+#else
+ u32 reserved2:4;
+ u32 dpofua:1; /* disable page out + force unit access
+ */
+ u32 reserved1:2;
+ u32 wp:1; /* write protected */
+#endif
+
+ u8 block_desclen;
+};
+
+struct scsi_mode_param_header10_s{
+ u32 mode_datalen:16;
+ u32 medium_type:8;
+
+ /*
+ * device specific parameters expanded for direct access devices
+ */
+#ifdef __BIGENDIAN
+ u32 wp:1; /* write protected */
+ u32 reserved1:2;
+ u32 dpofua:1; /* disable page out + force unit access
+ */
+ u32 reserved2:4;
+#else
+ u32 reserved2:4;
+ u32 dpofua:1; /* disable page out + force unit access
+ */
+ u32 reserved1:2;
+ u32 wp:1; /* write protected */
+#endif
+
+#ifdef __BIGENDIAN
+ u32 reserved3:7;
+ u32 longlba:1;
+#else
+ u32 longlba:1;
+ u32 reserved3:7;
+#endif
+ u32 reserved4:8;
+ u32 block_desclen:16;
+};
+
+/*
+ * mode parameter block descriptor
+ */
+struct scsi_mode_param_desc_s{
+ u32 nblks;
+ u32 density_code:8;
+ u32 block_length:24;
+};
+
+/*
+ * Disconnect-reconnect mode page format
+ */
+struct scsi_mp_disc_recn_s{
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 reserved1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 reserved1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+ u8 buf_full_ratio;
+ u8 buf_empty_ratio;
+
+ u8 bil_msb; /* bus inactivity limit -MSB */
+ u8 bil_lsb; /* bus inactivity limit -LSB */
+
+ u8 dtl_msb; /* disconnect time limit - MSB */
+ u8 dtl_lsb; /* disconnect time limit - LSB */
+
+ u8 ctl_msb; /* connect time limit - MSB */
+ u8 ctl_lsb; /* connect time limit - LSB */
+
+ u8 max_burst_len_msb;
+ u8 max_burst_len_lsb;
+#ifdef __BIGENDIAN
+ u8 emdp:1; /* enable modify data pointers */
+ u8 fa:3; /* fair arbitration */
+ u8 dimm:1; /* disconnect immediate */
+ u8 dtdc:3; /* data transfer disconnect control */
+#else
+ u8 dtdc:3; /* data transfer disconnect control */
+ u8 dimm:1; /* disconnect immediate */
+ u8 fa:3; /* fair arbitration */
+ u8 emdp:1; /* enable modify data pointers */
+#endif
+
+ u8 reserved3;
+
+ u8 first_burst_len_msb;
+ u8 first_burst_len_lsb;
+};
+
+/*
+ * SCSI format device mode page
+ */
+struct scsi_mp_format_device_s{
+#ifdef __BIGENDIAN
+ u32 ps:1;
+ u32 reserved1:1;
+ u32 page_code:6;
+#else
+ u32 page_code:6;
+ u32 reserved1:1;
+ u32 ps:1;
+#endif
+ u32 page_len:8;
+ u32 tracks_per_zone:16;
+
+ u32 a_sec_per_zone:16;
+ u32 a_tracks_per_zone:16;
+
+ u32 a_tracks_per_lun:16; /* alternate tracks/lun-MSB */
+ u32 sec_per_track:16; /* sectors/track-MSB */
+
+ u32 bytes_per_sector:16;
+ u32 interleave:16;
+
+ u32 tsf:16; /* track skew factor-MSB */
+ u32 csf:16; /* cylinder skew factor-MSB */
+
+#ifdef __BIGENDIAN
+ u32 ssec:1; /* soft sector formatting */
+ u32 hsec:1; /* hard sector formatting */
+ u32 rmb:1; /* removable media */
+ u32 surf:1; /* surface */
+ u32 reserved2:4;
+#else
+ u32 reserved2:4;
+ u32 surf:1; /* surface */
+ u32 rmb:1; /* removable media */
+ u32 hsec:1; /* hard sector formatting */
+ u32 ssec:1; /* soft sector formatting */
+#endif
+ u32 reserved3:24;
+};
+
+/*
+ * SCSI rigid disk device geometry page
+ */
+struct scsi_mp_rigid_device_geometry_s{
+#ifdef __BIGENDIAN
+ u32 ps:1;
+ u32 reserved1:1;
+ u32 page_code:6;
+#else
+ u32 page_code:6;
+ u32 reserved1:1;
+ u32 ps:1;
+#endif
+ u32 page_len:8;
+ u32 num_cylinders0:8;
+ u32 num_cylinders1:8;
+
+ u32 num_cylinders2:8;
+ u32 num_heads:8;
+ u32 scwp0:8;
+ u32 scwp1:8;
+
+ u32 scwp2:8;
+ u32 scrwc0:8;
+ u32 scrwc1:8;
+ u32 scrwc2:8;
+
+ u32 dsr:16;
+ u32 lscyl0:8;
+ u32 lscyl1:8;
+
+ u32 lscyl2:8;
+#ifdef __BIGENDIAN
+ u32 reserved2:6;
+ u32 rpl:2; /* rotational position locking */
+#else
+ u32 rpl:2; /* rotational position locking */
+ u32 reserved2:6;
+#endif
+ u32 rot_off:8;
+ u32 reserved3:8;
+
+ u32 med_rot_rate:16;
+ u32 reserved4:16;
+};
+
+/*
+ * SCSI caching mode page
+ */
+struct scsi_mp_caching_s{
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 res1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 res1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+#ifdef __BIGENDIAN
+ u8 ic:1; /* initiator control */
+ u8 abpf:1; /* abort pre-fetch */
+ u8 cap:1; /* caching analysis permitted */
+ u8 disc:1; /* discontinuity */
+ u8 size:1; /* size enable */
+ u8 wce:1; /* write cache enable */
+ u8 mf:1; /* multiplication factor */
+ u8 rcd:1; /* read cache disable */
+
+ u8 drrp:4; /* demand read retention priority */
+ u8 wrp:4; /* write retention priority */
+#else
+ u8 rcd:1; /* read cache disable */
+ u8 mf:1; /* multiplication factor */
+ u8 wce:1; /* write cache enable */
+ u8 size:1; /* size enable */
+ u8 disc:1; /* discontinuity */
+ u8 cap:1; /* caching analysis permitted */
+ u8 abpf:1; /* abort pre-fetch */
+ u8 ic:1; /* initiator control */
+
+ u8 wrp:4; /* write retention priority */
+ u8 drrp:4; /* demand read retention priority */
+#endif
+ u8 dptl[2];/* disable pre-fetch transfer length */
+ u8 min_prefetch[2];
+ u8 max_prefetch[2];
+ u8 max_prefetch_limit[2];
+#ifdef __BIGENDIAN
+ u8 fsw:1; /* force sequential write */
+ u8 lbcss:1;/* logical block cache segment size */
+ u8 dra:1; /* disable read ahead */
+ u8 vs:2; /* vendor specific */
+ u8 res2:3;
+#else
+ u8 res2:3;
+ u8 vs:2; /* vendor specific */
+ u8 dra:1; /* disable read ahead */
+ u8 lbcss:1;/* logical block cache segment size */
+ u8 fsw:1; /* force sequential write */
+#endif
+ u8 num_cache_segs;
+
+ u8 cache_seg_size[2];
+ u8 res3;
+ u8 non_cache_seg_size[3];
+};
+
+/*
+ * SCSI control mode page
+ */
+struct scsi_mp_control_page_s{
+#ifdef __BIGENDIAN
+u8 ps:1;
+u8 reserved1:1;
+u8 page_code:6;
+#else
+u8 page_code:6;
+u8 reserved1:1;
+u8 ps:1;
+#endif
+ u8 page_len;
+#ifdef __BIGENDIAN
+ u8 tst:3; /* task set type */
+ u8 reserved3:3;
+ u8 gltsd:1; /* global logging target save disable */
+ u8 rlec:1; /* report log exception condition */
+
+ u8 qalgo_mod:4; /* queue alogorithm modifier */
+ u8 reserved4:1;
+ u8 qerr:2; /* queue error management */
+ u8 dque:1; /* disable queuing */
+
+ u8 reserved5:1;
+ u8 rac:1; /* report a check */
+ u8 reserved6:2;
+ u8 swp:1; /* software write protect */
+ u8 raerp:1; /* ready AER permission */
+ u8 uaaerp:1; /* unit attenstion AER permission */
+ u8 eaerp:1; /* error AER permission */
+
+ u8 reserved7:5;
+ u8 autoload_mod:3;
+#else
+ u8 rlec:1; /* report log exception condition */
+ u8 gltsd:1; /* global logging target save disable */
+ u8 reserved3:3;
+ u8 tst:3; /* task set type */
+
+ u8 dque:1; /* disable queuing */
+ u8 qerr:2; /* queue error management */
+ u8 reserved4:1;
+ u8 qalgo_mod:4; /* queue alogorithm modifier */
+
+ u8 eaerp:1; /* error AER permission */
+ u8 uaaerp:1; /* unit attenstion AER permission */
+ u8 raerp:1; /* ready AER permission */
+ u8 swp:1; /* software write protect */
+ u8 reserved6:2;
+ u8 rac:1; /* report a check */
+ u8 reserved5:1;
+
+ u8 autoload_mod:3;
+ u8 reserved7:5;
+#endif
+ u8 rahp_msb; /* ready AER holdoff period - MSB */
+ u8 rahp_lsb; /* ready AER holdoff period - LSB */
+
+ u8 busy_timeout_period_msb;
+ u8 busy_timeout_period_lsb;
+
+ u8 ext_selftest_compl_time_msb;
+ u8 ext_selftest_compl_time_lsb;
+};
+
+/*
+ * SCSI medium types supported mode page
+ */
+struct scsi_mp_medium_types_sup_s{
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 reserved1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 reserved1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+
+ u8 reserved3[2];
+ u8 med_type1_sup; /* medium type one supported */
+ u8 med_type2_sup; /* medium type two supported */
+ u8 med_type3_sup; /* medium type three supported */
+ u8 med_type4_sup; /* medium type four supported */
+};
+
+/*
+ * SCSI informational exception control mode page
+ */
+struct scsi_mp_info_excpt_cntl_s{
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 reserved1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 reserved1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+#ifdef __BIGENDIAN
+ u8 perf:1; /* performance */
+ u8 reserved3:1;
+ u8 ebf:1; /* enable background fucntion */
+ u8 ewasc:1; /* enable warning */
+ u8 dexcpt:1; /* disable exception control */
+ u8 test:1; /* enable test device failure
+ * notification
+ */
+ u8 reserved4:1;
+ u8 log_error:1;
+
+ u8 reserved5:4;
+ u8 mrie:4; /* method of reporting info
+ * exceptions
+ */
+#else
+ u8 log_error:1;
+ u8 reserved4:1;
+ u8 test:1; /* enable test device failure
+ * notification
+ */
+ u8 dexcpt:1; /* disable exception control */
+ u8 ewasc:1; /* enable warning */
+ u8 ebf:1; /* enable background fucntion */
+ u8 reserved3:1;
+ u8 perf:1; /* performance */
+
+ u8 mrie:4; /* method of reporting info
+ * exceptions
+ */
+ u8 reserved5:4;
+#endif
+ u8 interval_timer_msb;
+ u8 interval_timer_lsb;
+
+ u8 report_count_msb;
+ u8 report_count_lsb;
+};
+
+/*
+ * Methods of reporting informational exceptions
+ */
+#define SCSI_MP_IEC_NO_REPORT 0x0 /* no reporting of exceptions */
+#define SCSI_MP_IEC_AER 0x1 /* async event reporting */
+#define SCSI_MP_IEC_UNIT_ATTN 0x2 /* generate unit attenstion */
+#define SCSI_MO_IEC_COND_REC_ERR 0x3 /* conditionally generate recovered
+ * error
+ */
+#define SCSI_MP_IEC_UNCOND_REC_ERR 0x4 /* unconditionally generate recovered
+ * error
+ */
+#define SCSI_MP_IEC_NO_SENSE 0x5 /* generate no sense */
+#define SCSI_MP_IEC_ON_REQUEST 0x6 /* only report exceptions on request */
+
+/*
+ * SCSI flexible disk page
+ */
+struct scsi_mp_flexible_disk_s{
+#ifdef __BIGENDIAN
+ u8 ps:1;
+ u8 reserved1:1;
+ u8 page_code:6;
+#else
+ u8 page_code:6;
+ u8 reserved1:1;
+ u8 ps:1;
+#endif
+ u8 page_len;
+
+ u8 transfer_rate_msb;
+ u8 transfer_rate_lsb;
+
+ u8 num_heads;
+ u8 num_sectors;
+
+ u8 bytes_per_sector_msb;
+ u8 bytes_per_sector_lsb;
+
+ u8 num_cylinders_msb;
+ u8 num_cylinders_lsb;
+
+ u8 sc_wpc_msb; /* starting cylinder-write
+ * precompensation msb
+ */
+ u8 sc_wpc_lsb; /* starting cylinder-write
+ * precompensation lsb
+ */
+ u8 sc_rwc_msb; /* starting cylinder-reduced write
+ * current msb
+ */
+ u8 sc_rwc_lsb; /* starting cylinder-reduced write
+ * current lsb
+ */
+
+ u8 dev_step_rate_msb;
+ u8 dev_step_rate_lsb;
+
+ u8 dev_step_pulse_width;
+
+ u8 head_sd_msb; /* head settle delay msb */
+ u8 head_sd_lsb; /* head settle delay lsb */
+
+ u8 motor_on_delay;
+ u8 motor_off_delay;
+#ifdef __BIGENDIAN
+ u8 trdy:1; /* true ready bit */
+ u8 ssn:1; /* start sector number bit */
+ u8 mo:1; /* motor on bit */
+ u8 reserved3:5;
+
+ u8 reserved4:4;
+ u8 spc:4; /* step pulse per cylinder */
+#else
+ u8 reserved3:5;
+ u8 mo:1; /* motor on bit */
+ u8 ssn:1; /* start sector number bit */
+ u8 trdy:1; /* true ready bit */
+
+ u8 spc:4; /* step pulse per cylinder */
+ u8 reserved4:4;
+#endif
+ u8 write_comp;
+ u8 head_load_delay;
+ u8 head_unload_delay;
+#ifdef __BIGENDIAN
+ u8 pin34:4; /* pin34 usage */
+ u8 pin2:4; /* pin2 usage */
+
+ u8 pin4:4; /* pin4 usage */
+ u8 pin1:4; /* pin1 usage */
+#else
+ u8 pin2:4; /* pin2 usage */
+ u8 pin34:4; /* pin34 usage */
+
+ u8 pin1:4; /* pin1 usage */
+ u8 pin4:4; /* pin4 usage */
+#endif
+ u8 med_rot_rate_msb;
+ u8 med_rot_rate_lsb;
+
+ u8 reserved5[2];
+};
+
+struct scsi_mode_page_format_data6_s{
+ struct scsi_mode_param_header6_s mph; /* mode page header */
+ struct scsi_mode_param_desc_s desc; /* block descriptor */
+ struct scsi_mp_format_device_s format; /* format device data */
+};
+
+struct scsi_mode_page_format_data10_s{
+ struct scsi_mode_param_header10_s mph; /* mode page header */
+ struct scsi_mode_param_desc_s desc; /* block descriptor */
+ struct scsi_mp_format_device_s format; /* format device data */
+};
+
+struct scsi_mode_page_rdg_data6_s{
+ struct scsi_mode_param_header6_s mph; /* mode page header */
+ struct scsi_mode_param_desc_s desc; /* block descriptor */
+ struct scsi_mp_rigid_device_geometry_s rdg;
+ /* rigid geometry data */
+};
+
+struct scsi_mode_page_rdg_data10_s{
+ struct scsi_mode_param_header10_s mph; /* mode page header */
+ struct scsi_mode_param_desc_s desc; /* block descriptor */
+ struct scsi_mp_rigid_device_geometry_s rdg;
+ /* rigid geometry data */
+};
+
+struct scsi_mode_page_cache6_s{
+ struct scsi_mode_param_header6_s mph; /* mode page header */
+ struct scsi_mode_param_desc_s desc; /* block descriptor */
+ struct scsi_mp_caching_s cache; /* cache page data */
+};
+
+struct scsi_mode_page_cache10_s{
+ struct scsi_mode_param_header10_s mph; /* mode page header */
+ struct scsi_mode_param_desc_s desc; /* block descriptor */
+ struct scsi_mp_caching_s cache; /* cache page data */
+};
+
+/* --------------------------------------------------------------
+ * Format Unit command
+ * ------------------------------------------------------------
+ */
+
+/*
+ * Format Unit CDB
+ */
+struct scsi_format_unit_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 res1:3;
+ u8 fmtdata:1; /* if set, data out phase has format
+ * data
+ */
+ u8 cmplst:1; /* if set, defect list is complete */
+ u8 def_list:3; /* format of defect descriptor is
+ * fmtdata =1
+ */
+#else
+ u8 def_list:3; /* format of defect descriptor is
+ * fmtdata = 1
+ */
+ u8 cmplst:1; /* if set, defect list is complete */
+ u8 fmtdata:1; /* if set, data out phase has format
+ * data
+ */
+ u8 res1:3;
+#endif
+ u8 interleave_msb;
+ u8 interleave_lsb;
+ u8 vendor_spec;
+ u8 control;
+};
+
+/*
+ * h
+ */
+struct scsi_reserve6_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved:3;
+ u8 obsolete:4;
+ u8 extent:1;
+#else
+ u8 extent:1;
+ u8 obsolete:4;
+ u8 reserved:3;
+#endif
+ u8 reservation_id;
+ u16 param_list_len;
+ u8 control;
+};
+
+/*
+ * h
+ */
+struct scsi_release6_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 obsolete:4;
+ u8 extent:1;
+#else
+ u8 extent:1;
+ u8 obsolete:4;
+ u8 reserved1:3;
+#endif
+ u8 reservation_id;
+ u16 reserved2;
+ u8 control;
+};
+
+/*
+ * h
+ */
+struct scsi_reserve10_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 third_party:1;
+ u8 reserved2:2;
+ u8 long_id:1;
+ u8 extent:1;
+#else
+ u8 extent:1;
+ u8 long_id:1;
+ u8 reserved2:2;
+ u8 third_party:1;
+ u8 reserved1:3;
+#endif
+ u8 reservation_id;
+ u8 third_pty_dev_id;
+ u8 reserved3;
+ u8 reserved4;
+ u8 reserved5;
+ u16 param_list_len;
+ u8 control;
+};
+
+struct scsi_release10_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 third_party:1;
+ u8 reserved2:2;
+ u8 long_id:1;
+ u8 extent:1;
+#else
+ u8 extent:1;
+ u8 long_id:1;
+ u8 reserved2:2;
+ u8 third_party:1;
+ u8 reserved1:3;
+#endif
+ u8 reservation_id;
+ u8 third_pty_dev_id;
+ u8 reserved3;
+ u8 reserved4;
+ u8 reserved5;
+ u16 param_list_len;
+ u8 control;
+};
+
+struct scsi_verify10_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 dpo:1;
+ u8 reserved:2;
+ u8 bytchk:1;
+ u8 reladdr:1;
+#else
+ u8 reladdr:1;
+ u8 bytchk:1;
+ u8 reserved:2;
+ u8 dpo:1;
+ u8 lun:3;
+#endif
+ u8 lba0;
+ u8 lba1;
+ u8 lba2;
+ u8 lba3;
+ u8 reserved1;
+ u8 verification_len0;
+ u8 verification_len1;
+ u8 control_byte;
+};
+
+struct scsi_request_sense_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 lun:3;
+ u8 reserved:5;
+#else
+ u8 reserved:5;
+ u8 lun:3;
+#endif
+ u8 reserved0;
+ u8 reserved1;
+ u8 alloc_len;
+ u8 control_byte;
+};
+
+/* ------------------------------------------------------------
+ * SCSI status byte values
+ * ------------------------------------------------------------
+ */
+#define SCSI_STATUS_GOOD 0x00
+#define SCSI_STATUS_CHECK_CONDITION 0x02
+#define SCSI_STATUS_CONDITION_MET 0x04
+#define SCSI_STATUS_BUSY 0x08
+#define SCSI_STATUS_INTERMEDIATE 0x10
+#define SCSI_STATUS_ICM 0x14 /* intermediate condition met */
+#define SCSI_STATUS_RESERVATION_CONFLICT 0x18
+#define SCSI_STATUS_COMMAND_TERMINATED 0x22
+#define SCSI_STATUS_QUEUE_FULL 0x28
+#define SCSI_STATUS_ACA_ACTIVE 0x30
+
+#define SCSI_MAX_ALLOC_LEN 0xFF /* maximum allocarion length
+ * in CDBs
+ */
+
+#define SCSI_OP_WRITE_VERIFY10 0x2E
+#define SCSI_OP_WRITE_VERIFY12 0xAE
+#define SCSI_OP_UNDEF 0xFF
+
+/*
+ * SCSI WRITE-VERIFY(10) command
+ */
+struct scsi_write_verify10_s{
+ u8 opcode;
+#ifdef __BIGENDIAN
+ u8 reserved1:3;
+ u8 dpo:1; /* Disable Page Out */
+ u8 reserved2:1;
+ u8 ebp:1; /* erse by-pass */
+ u8 bytchk:1; /* byte check */
+ u8 rel_adr:1; /* relative address */
+#else
+ u8 rel_adr:1; /* relative address */
+ u8 bytchk:1; /* byte check */
+ u8 ebp:1; /* erse by-pass */
+ u8 reserved2:1;
+ u8 dpo:1; /* Disable Page Out */
+ u8 reserved1:3;
+#endif
+ u8 lba0; /* logical block address - MSB */
+ u8 lba1;
+ u8 lba2;
+ u8 lba3; /* LSB */
+ u8 reserved3;
+ u8 xfer_length0; /* transfer length in blocks - MSB */
+ u8 xfer_length1; /* LSB */
+ u8 control;
+};
+
+#pragma pack()
+
+#endif /* __SCSI_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * types.h Protocol defined base types
+ */
+
+#ifndef __TYPES_H__
+#define __TYPES_H__
+
+#include <bfa_os_inc.h>
+
+#define wwn_t u64
+#define lun_t u64
+
+#define WWN_NULL (0)
+#define FC_SYMNAME_MAX 256 /* max name server symbolic name size */
+#define FC_ALPA_MAX 128
+
+#pragma pack(1)
+
+#define MAC_ADDRLEN (6)
+struct mac_s { u8 mac[MAC_ADDRLEN]; };
+#define mac_t struct mac_s
+
+#pragma pack()
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * port_loop.c vport private loop implementation.
+ */
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, LOOP);
+
+/**
+ * ALPA to LIXA bitmap mapping
+ *
+ * ALPA 0x00 (Word 0, Bit 30) is invalid for N_Ports. Also Word 0 Bit 31
+ * is for L_bit (login required) and is filled as ALPA 0x00 here.
+ */
+static const u8 port_loop_alpa_map[] = {
+ 0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, /* Word 3 Bits 0..7 */
+ 0xD9, 0xD6, 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, /* Word 3 Bits 8..15 */
+ 0xCD, 0xCC, 0xCB, 0xCA, 0xC9, 0xC7, 0xC6, 0xC5, /* Word 3 Bits 16..23 */
+ 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5, 0xB4, 0xB3, /* Word 3 Bits 24..31 */
+
+ 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9, /* Word 2 Bits 0..7 */
+ 0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, /* Word 2 Bits 8..15 */
+ 0x98, 0x97, 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, /* Word 2 Bits 16..23 */
+ 0x80, 0x7C, 0x7A, 0x79, 0x76, 0x75, 0x74, 0x73, /* Word 2 Bits 24..31 */
+
+ 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B, 0x6A, 0x69, /* Word 1 Bits 0..7 */
+ 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56, /* Word 1 Bits 8..15 */
+ 0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, /* Word 1 Bits 16..23 */
+ 0x4B, 0x4A, 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, /* Word 1 Bits 24..31 */
+
+ 0x3A, 0x39, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, /* Word 0 Bits 0..7 */
+ 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29, 0x27, 0x26, /* Word 0 Bits 8..15 */
+ 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17, /* Word 0 Bits 16..23 */
+ 0x10, 0x0F, 0x08, 0x04, 0x02, 0x01, 0x00, 0x00, /* Word 0 Bits 24..31 */
+};
+
+/*
+ * Local Functions
+ */
+bfa_status_t bfa_fcs_port_loop_send_plogi(struct bfa_fcs_port_s *port,
+ u8 alpa);
+
+void bfa_fcs_port_loop_plogi_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+
+bfa_status_t bfa_fcs_port_loop_send_adisc(struct bfa_fcs_port_s *port,
+ u8 alpa);
+
+void bfa_fcs_port_loop_adisc_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+
+bfa_status_t bfa_fcs_port_loop_send_plogi_acc(struct bfa_fcs_port_s *port,
+ u8 alpa);
+
+void bfa_fcs_port_loop_plogi_acc_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+
+bfa_status_t bfa_fcs_port_loop_send_adisc_acc(struct bfa_fcs_port_s *port,
+ u8 alpa);
+
+void bfa_fcs_port_loop_adisc_acc_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+/**
+ * Called by port to initializar in provate LOOP topology.
+ */
+void
+bfa_fcs_port_loop_init(struct bfa_fcs_port_s *port)
+{
+}
+
+/**
+ * Called by port to notify transition to online state.
+ */
+void
+bfa_fcs_port_loop_online(struct bfa_fcs_port_s *port)
+{
+
+ u8 num_alpa = port->port_topo.ploop.num_alpa;
+ u8 *alpa_pos_map = port->port_topo.ploop.alpa_pos_map;
+ struct bfa_fcs_rport_s *r_port;
+ int ii = 0;
+
+ /*
+ * If the port role is Initiator Mode, create Rports.
+ */
+ if (port->port_cfg.roles == BFA_PORT_ROLE_FCP_IM) {
+ /*
+ * Check if the ALPA positional bitmap is available.
+ * if not, we send PLOGI to all possible ALPAs.
+ */
+ if (num_alpa > 0) {
+ for (ii = 0; ii < num_alpa; ii++) {
+ /*
+ * ignore ALPA of bfa port
+ */
+ if (alpa_pos_map[ii] != port->pid) {
+ r_port = bfa_fcs_rport_create(port,
+ alpa_pos_map[ii]);
+ }
+ }
+ } else {
+ for (ii = 0; ii < MAX_ALPA_COUNT; ii++) {
+ /*
+ * ignore ALPA of bfa port
+ */
+ if ((port_loop_alpa_map[ii] > 0)
+ && (port_loop_alpa_map[ii] != port->pid))
+ bfa_fcs_port_loop_send_plogi(port,
+ port_loop_alpa_map[ii]);
+ /**TBD */
+ }
+ }
+ } else {
+ /*
+ * TBD Target Mode ??
+ */
+ }
+
+}
+
+/**
+ * Called by port to notify transition to offline state.
+ */
+void
+bfa_fcs_port_loop_offline(struct bfa_fcs_port_s *port)
+{
+
+}
+
+/**
+ * Called by port to notify a LIP on the loop.
+ */
+void
+bfa_fcs_port_loop_lip(struct bfa_fcs_port_s *port)
+{
+}
+
+/**
+ * Local Functions.
+ */
+bfa_status_t
+bfa_fcs_port_loop_send_plogi(struct bfa_fcs_port_s *port, u8 alpa)
+{
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp = NULL;
+ int len;
+
+ bfa_trc(port->fcs, alpa);
+
+ fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
+ NULL);
+ bfa_assert(fcxp);
+
+ len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.pwwn, port->port_cfg.nwwn,
+ bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs,
+ bfa_fcs_port_loop_plogi_response, (void *)port,
+ FC_MAX_PDUSZ, FC_RA_TOV);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Called by fcxp to notify the Plogi response
+ */
+void
+bfa_fcs_port_loop_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
+ struct fc_logi_s *plogi_resp;
+ struct fc_els_cmd_s *els_cmd;
+
+ bfa_trc(port->fcs, req_status);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ /*
+ * @todo
+ * This could mean that the device with this APLA does not
+ * exist on the loop.
+ */
+
+ return;
+ }
+
+ els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+ plogi_resp = (struct fc_logi_s *) els_cmd;
+
+ if (els_cmd->els_code == FC_ELS_ACC) {
+ bfa_fcs_rport_start(port, rsp_fchs, plogi_resp);
+ } else {
+ bfa_trc(port->fcs, plogi_resp->els_cmd.els_code);
+ bfa_assert(0);
+ }
+}
+
+bfa_status_t
+bfa_fcs_port_loop_send_plogi_acc(struct bfa_fcs_port_s *port, u8 alpa)
+{
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ int len;
+
+ bfa_trc(port->fcs, alpa);
+
+ fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
+ NULL);
+ bfa_assert(fcxp);
+
+ len = fc_plogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.pwwn, port->port_cfg.nwwn,
+ bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs,
+ bfa_fcs_port_loop_plogi_acc_response,
+ (void *)port, FC_MAX_PDUSZ, 0); /* No response
+ * expected
+ */
+
+ return BFA_STATUS_OK;
+}
+
+/*
+ * Plogi Acc Response
+ * We donot do any processing here.
+ */
+void
+bfa_fcs_port_loop_plogi_acc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+
+ struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
+
+ bfa_trc(port->fcs, port->pid);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ return;
+ }
+}
+
+bfa_status_t
+bfa_fcs_port_loop_send_adisc(struct bfa_fcs_port_s *port, u8 alpa)
+{
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ int len;
+
+ bfa_trc(port->fcs, alpa);
+
+ fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
+ NULL);
+ bfa_assert(fcxp);
+
+ len = fc_adisc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.pwwn, port->port_cfg.nwwn);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs,
+ bfa_fcs_port_loop_adisc_response, (void *)port,
+ FC_MAX_PDUSZ, FC_RA_TOV);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Called by fcxp to notify the ADISC response
+ */
+void
+bfa_fcs_port_loop_adisc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
+ struct bfa_fcs_rport_s *rport;
+ struct fc_adisc_s *adisc_resp;
+ struct fc_els_cmd_s *els_cmd;
+ u32 pid = rsp_fchs->s_id;
+
+ bfa_trc(port->fcs, req_status);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ /*
+ * TBD : we may need to retry certain requests
+ */
+ bfa_fcxp_free(fcxp);
+ return;
+ }
+
+ els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+ adisc_resp = (struct fc_adisc_s *) els_cmd;
+
+ if (els_cmd->els_code == FC_ELS_ACC) {
+ } else {
+ bfa_trc(port->fcs, adisc_resp->els_cmd.els_code);
+
+ /*
+ * TBD: we may need to check for reject codes and retry
+ */
+ rport = bfa_fcs_port_get_rport_by_pid(port, pid);
+ if (rport) {
+ list_del(&rport->qe);
+ bfa_fcs_rport_delete(rport);
+ }
+
+ }
+ return;
+}
+
+bfa_status_t
+bfa_fcs_port_loop_send_adisc_acc(struct bfa_fcs_port_s *port, u8 alpa)
+{
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ int len;
+
+ bfa_trc(port->fcs, alpa);
+
+ fcxp = bfa_fcxp_alloc(NULL, port->fcs->bfa, 0, 0, NULL, NULL, NULL,
+ NULL);
+ bfa_assert(fcxp);
+
+ len = fc_adisc_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), alpa,
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.pwwn, port->port_cfg.nwwn);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs,
+ bfa_fcs_port_loop_adisc_acc_response,
+ (void *)port, FC_MAX_PDUSZ, 0); /* no reponse
+ * expected
+ */
+
+ return BFA_STATUS_OK;
+}
+
+/*
+ * Adisc Acc Response
+ * We donot do any processing here.
+ */
+void
+bfa_fcs_port_loop_adisc_acc_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+
+ struct bfa_fcs_port_s *port = (struct bfa_fcs_port_s *) cbarg;
+
+ bfa_trc(port->fcs, port->pid);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ return;
+ }
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * port_api.c BFA FCS port
+ */
+
+#include <fcs/bfa_fcs.h>
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_rport.h>
+#include "fcs_rport.h"
+#include "fcs_fabric.h"
+#include "fcs_trcmod.h"
+#include "fcs_vport.h"
+
+BFA_TRC_FILE(FCS, PORT_API);
+
+
+
+/**
+ * fcs_port_api BFA FCS port API
+ */
+
+void
+bfa_fcs_cfg_base_port(struct bfa_fcs_s *fcs, struct bfa_port_cfg_s *port_cfg)
+{
+}
+
+struct bfa_fcs_port_s *
+bfa_fcs_get_base_port(struct bfa_fcs_s *fcs)
+{
+ return (&fcs->fabric.bport);
+}
+
+wwn_t
+bfa_fcs_port_get_rport(struct bfa_fcs_port_s *port, wwn_t wwn, int index,
+ int nrports, bfa_boolean_t bwwn)
+{
+ struct list_head *qh, *qe;
+ struct bfa_fcs_rport_s *rport = NULL;
+ int i;
+ struct bfa_fcs_s *fcs;
+
+ if (port == NULL || nrports == 0)
+ return (wwn_t) 0;
+
+ fcs = port->fcs;
+ bfa_trc(fcs, (u32) nrports);
+
+ i = 0;
+ qh = &port->rport_q;
+ qe = bfa_q_first(qh);
+
+ while ((qe != qh) && (i < nrports)) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ if (bfa_os_ntoh3b(rport->pid) > 0xFFF000) {
+ qe = bfa_q_next(qe);
+ bfa_trc(fcs, (u32) rport->pwwn);
+ bfa_trc(fcs, rport->pid);
+ bfa_trc(fcs, i);
+ continue;
+ }
+
+ if (bwwn) {
+ if (!memcmp(&wwn, &rport->pwwn, 8))
+ break;
+ } else {
+ if (i == index)
+ break;
+ }
+
+ i++;
+ qe = bfa_q_next(qe);
+ }
+
+ bfa_trc(fcs, i);
+ if (rport) {
+ return rport->pwwn;
+ } else {
+ return (wwn_t) 0;
+ }
+}
+
+void
+bfa_fcs_port_get_rports(struct bfa_fcs_port_s *port, wwn_t rport_wwns[],
+ int *nrports)
+{
+ struct list_head *qh, *qe;
+ struct bfa_fcs_rport_s *rport = NULL;
+ int i;
+ struct bfa_fcs_s *fcs;
+
+ if (port == NULL || rport_wwns == NULL || *nrports == 0)
+ return;
+
+ fcs = port->fcs;
+ bfa_trc(fcs, (u32) *nrports);
+
+ i = 0;
+ qh = &port->rport_q;
+ qe = bfa_q_first(qh);
+
+ while ((qe != qh) && (i < *nrports)) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ if (bfa_os_ntoh3b(rport->pid) > 0xFFF000) {
+ qe = bfa_q_next(qe);
+ bfa_trc(fcs, (u32) rport->pwwn);
+ bfa_trc(fcs, rport->pid);
+ bfa_trc(fcs, i);
+ continue;
+ }
+
+ rport_wwns[i] = rport->pwwn;
+
+ i++;
+ qe = bfa_q_next(qe);
+ }
+
+ bfa_trc(fcs, i);
+ *nrports = i;
+ return;
+}
+
+/*
+ * Iterate's through all the rport's in the given port to
+ * determine the maximum operating speed.
+ */
+enum bfa_pport_speed
+bfa_fcs_port_get_rport_max_speed(struct bfa_fcs_port_s *port)
+{
+ struct list_head *qh, *qe;
+ struct bfa_fcs_rport_s *rport = NULL;
+ struct bfa_fcs_s *fcs;
+ enum bfa_pport_speed max_speed = 0;
+ struct bfa_pport_attr_s pport_attr;
+ enum bfa_pport_speed pport_speed;
+
+ if (port == NULL)
+ return 0;
+
+ fcs = port->fcs;
+
+ /*
+ * Get Physical port's current speed
+ */
+ bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+ pport_speed = pport_attr.speed;
+ bfa_trc(fcs, pport_speed);
+
+ qh = &port->rport_q;
+ qe = bfa_q_first(qh);
+
+ while (qe != qh) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ if ((bfa_os_ntoh3b(rport->pid) > 0xFFF000)
+ || (bfa_fcs_rport_get_state(rport) == BFA_RPORT_OFFLINE)) {
+ qe = bfa_q_next(qe);
+ continue;
+ }
+
+ if ((rport->rpf.rpsc_speed == BFA_PPORT_SPEED_8GBPS)
+ || (rport->rpf.rpsc_speed > pport_speed)) {
+ max_speed = rport->rpf.rpsc_speed;
+ break;
+ } else if (rport->rpf.rpsc_speed > max_speed) {
+ max_speed = rport->rpf.rpsc_speed;
+ }
+
+ qe = bfa_q_next(qe);
+ }
+
+ bfa_trc(fcs, max_speed);
+ return max_speed;
+}
+
+struct bfa_fcs_port_s *
+bfa_fcs_lookup_port(struct bfa_fcs_s *fcs, u16 vf_id, wwn_t lpwwn)
+{
+ struct bfa_fcs_vport_s *vport;
+ bfa_fcs_vf_t *vf;
+
+ bfa_assert(fcs != NULL);
+
+ vf = bfa_fcs_vf_lookup(fcs, vf_id);
+ if (vf == NULL) {
+ bfa_trc(fcs, vf_id);
+ return (NULL);
+ }
+
+ if (!lpwwn || (vf->bport.port_cfg.pwwn == lpwwn))
+ return (&vf->bport);
+
+ vport = bfa_fcs_fabric_vport_lookup(vf, lpwwn);
+ if (vport)
+ return (&vport->lport);
+
+ return (NULL);
+}
+
+/*
+ * API corresponding to VmWare's NPIV_VPORT_GETINFO.
+ */
+void
+bfa_fcs_port_get_info(struct bfa_fcs_port_s *port,
+ struct bfa_port_info_s *port_info)
+{
+
+ bfa_trc(port->fcs, port->fabric->fabric_name);
+
+ if (port->vport == NULL) {
+ /*
+ * This is a Physical port
+ */
+ port_info->port_type = BFA_PORT_TYPE_PHYSICAL;
+
+ /*
+ * @todo : need to fix the state & reason
+ */
+ port_info->port_state = 0;
+ port_info->offline_reason = 0;
+
+ port_info->port_wwn = bfa_fcs_port_get_pwwn(port);
+ port_info->node_wwn = bfa_fcs_port_get_nwwn(port);
+
+ port_info->max_vports_supp = bfa_fcs_vport_get_max(port->fcs);
+ port_info->num_vports_inuse =
+ bfa_fcs_fabric_vport_count(port->fabric);
+ port_info->max_rports_supp = BFA_FCS_MAX_RPORTS_SUPP;
+ port_info->num_rports_inuse = port->num_rports;
+ } else {
+ /*
+ * This is a virtual port
+ */
+ port_info->port_type = BFA_PORT_TYPE_VIRTUAL;
+
+ /*
+ * @todo : need to fix the state & reason
+ */
+ port_info->port_state = 0;
+ port_info->offline_reason = 0;
+
+ port_info->port_wwn = bfa_fcs_port_get_pwwn(port);
+ port_info->node_wwn = bfa_fcs_port_get_nwwn(port);
+ }
+}
+
+void
+bfa_fcs_port_get_stats(struct bfa_fcs_port_s *fcs_port,
+ struct bfa_port_stats_s *port_stats)
+{
+ bfa_os_memcpy(port_stats, &fcs_port->stats,
+ sizeof(struct bfa_port_stats_s));
+ return;
+}
+
+void
+bfa_fcs_port_clear_stats(struct bfa_fcs_port_s *fcs_port)
+{
+ bfa_os_memset(&fcs_port->stats, 0, sizeof(struct bfa_port_stats_s));
+ return;
+}
+
+void
+bfa_fcs_port_enable_ipfc_roles(struct bfa_fcs_port_s *fcs_port)
+{
+ fcs_port->port_cfg.roles |= BFA_PORT_ROLE_FCP_IPFC;
+ return;
+}
+
+void
+bfa_fcs_port_disable_ipfc_roles(struct bfa_fcs_port_s *fcs_port)
+{
+ fcs_port->port_cfg.roles &= ~BFA_PORT_ROLE_FCP_IPFC;
+ return;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef __VP_PRIV_H__
+#define __VP_PRIV_H__
+
+#include <fcs/bfa_fcs_lport.h>
+#include <fcs/bfa_fcs_vport.h>
+
+/*
+ * Functions exported by vps
+ */
+void bfa_fcs_vport_init(struct bfa_fcs_vport_s *vport);
+
+/*
+ * Functions exported by vps
+ */
+void bfa_fcs_vps_online(struct bfa_fcs_port_s *port);
+void bfa_fcs_vps_offline(struct bfa_fcs_port_s *port);
+void bfa_fcs_vps_lip(struct bfa_fcs_port_s *port);
+
+/*
+ * Functions exported by port_fab
+ */
+void bfa_fcs_port_fab_init(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_fab_online(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_fab_offline(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_fab_rx_frame(struct bfa_fcs_port_s *port,
+ u8 *rx_frame, u32 len);
+
+/*
+ * Functions exported by VP-NS.
+ */
+void bfa_fcs_port_ns_init(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_ns_offline(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_ns_online(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_ns_query(struct bfa_fcs_port_s *port);
+
+/*
+ * Functions exported by VP-SCN
+ */
+void bfa_fcs_port_scn_init(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_scn_offline(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_scn_online(struct bfa_fcs_port_s *vport);
+void bfa_fcs_port_scn_process_rscn(struct bfa_fcs_port_s *port,
+ struct fchs_s *rx_frame, u32 len);
+
+/*
+ * Functions exported by VP-N2N
+ */
+
+void bfa_fcs_port_n2n_init(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_n2n_online(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_n2n_offline(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_n2n_rx_frame(struct bfa_fcs_port_s *port,
+ u8 *rx_frame, u32 len);
+
+/*
+ * Functions exported by VP-LOOP
+ */
+void bfa_fcs_port_loop_init(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_loop_online(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_loop_offline(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_loop_lip(struct bfa_fcs_port_s *port);
+void bfa_fcs_port_loop_rx_frame(struct bfa_fcs_port_s *port,
+ u8 *rx_frame, u32 len);
+
+#endif /* __VP_PRIV_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, MS);
+
+#define BFA_FCS_MS_CMD_MAX_RETRIES 2
+/*
+ * forward declarations
+ */
+static void bfa_fcs_port_ms_send_plogi(void *ms_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_ms_timeout(void *arg);
+static void bfa_fcs_port_ms_plogi_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+
+static void bfa_fcs_port_ms_send_gmal(void *ms_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_ms_gmal_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_ms_send_gfn(void *ms_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_ms_gfn_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+/**
+ * fcs_ms_sm FCS MS state machine
+ */
+
+/**
+ * MS State Machine events
+ */
+enum port_ms_event {
+ MSSM_EVENT_PORT_ONLINE = 1,
+ MSSM_EVENT_PORT_OFFLINE = 2,
+ MSSM_EVENT_RSP_OK = 3,
+ MSSM_EVENT_RSP_ERROR = 4,
+ MSSM_EVENT_TIMEOUT = 5,
+ MSSM_EVENT_FCXP_SENT = 6,
+ MSSM_EVENT_PORT_FABRIC_RSCN = 7
+};
+
+static void bfa_fcs_port_ms_sm_offline(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_plogi_sending(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_plogi(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_plogi_retry(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_gmal_sending(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_gmal(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_gmal_retry(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_gfn_sending(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_gfn(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_gfn_retry(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+static void bfa_fcs_port_ms_sm_online(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event);
+/**
+ * Start in offline state - awaiting NS to send start.
+ */
+static void
+bfa_fcs_port_ms_sm_offline(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_PORT_ONLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_plogi_sending);
+ bfa_fcs_port_ms_send_plogi(ms, NULL);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_plogi_sending(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_plogi);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+ &ms->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_plogi(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_RSP_ERROR:
+ /*
+ * Start timer for a delayed retry
+ */
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_plogi_retry);
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ms->port), &ms->timer,
+ bfa_fcs_port_ms_timeout, ms,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case MSSM_EVENT_RSP_OK:
+ /*
+ * since plogi is done, now invoke MS related sub-modules
+ */
+ bfa_fcs_port_fdmi_online(ms);
+
+ /**
+ * if this is a Vport, go to online state.
+ */
+ if (ms->port->vport) {
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_online);
+ break;
+ }
+
+ /*
+ * For a base port we need to get the
+ * switch's IP address.
+ */
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gmal_sending);
+ bfa_fcs_port_ms_send_gmal(ms, NULL);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_fcxp_discard(ms->fcxp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_plogi_retry(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_TIMEOUT:
+ /*
+ * Retry Timer Expired. Re-send
+ */
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_plogi_sending);
+ bfa_fcs_port_ms_send_plogi(ms, NULL);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_timer_stop(&ms->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_online(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ /*
+ * now invoke MS related sub-modules
+ */
+ bfa_fcs_port_fdmi_offline(ms);
+ break;
+
+ case MSSM_EVENT_PORT_FABRIC_RSCN:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_sending);
+ ms->retry_cnt = 0;
+ bfa_fcs_port_ms_send_gfn(ms, NULL);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_gmal_sending(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gmal);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+ &ms->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_gmal(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_RSP_ERROR:
+ /*
+ * Start timer for a delayed retry
+ */
+ if (ms->retry_cnt++ < BFA_FCS_MS_CMD_MAX_RETRIES) {
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gmal_retry);
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+ &ms->timer, bfa_fcs_port_ms_timeout, ms,
+ BFA_FCS_RETRY_TIMEOUT);
+ } else {
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_sending);
+ bfa_fcs_port_ms_send_gfn(ms, NULL);
+ ms->retry_cnt = 0;
+ }
+ break;
+
+ case MSSM_EVENT_RSP_OK:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_sending);
+ bfa_fcs_port_ms_send_gfn(ms, NULL);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_fcxp_discard(ms->fcxp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_gmal_retry(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_TIMEOUT:
+ /*
+ * Retry Timer Expired. Re-send
+ */
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gmal_sending);
+ bfa_fcs_port_ms_send_gmal(ms, NULL);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_timer_stop(&ms->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * ms_pvt MS local functions
+ */
+
+static void
+bfa_fcs_port_ms_send_gmal(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_ms_s *ms = ms_cbarg;
+ struct bfa_fcs_port_s *port = ms->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(port->fcs, port->pid);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &ms->fcxp_wqe,
+ bfa_fcs_port_ms_send_gmal, ms);
+ return;
+ }
+ ms->fcxp = fcxp;
+
+ len = fc_gmal_req_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_fcs_port_get_fcid(port),
+ bfa_lps_get_peer_nwwn(port->fabric->lps));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_ms_gmal_response,
+ (void *)ms, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ bfa_sm_send_event(ms, MSSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_port_ms_gmal_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_ms_s *ms = (struct bfa_fcs_port_ms_s *)cbarg;
+ struct bfa_fcs_port_s *port = ms->port;
+ struct ct_hdr_s *cthdr = NULL;
+ struct fcgs_gmal_resp_s *gmal_resp;
+ struct fc_gmal_entry_s *gmal_entry;
+ u32 num_entries;
+ u8 *rsp_str;
+
+ bfa_trc(port->fcs, req_status);
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ gmal_resp = (struct fcgs_gmal_resp_s *)(cthdr + 1);
+ num_entries = bfa_os_ntohl(gmal_resp->ms_len);
+ if (num_entries == 0) {
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+ return;
+ }
+ /*
+ * The response could contain multiple Entries.
+ * Entries for SNMP interface, etc.
+ * We look for the entry with a telnet prefix.
+ * First "http://" entry refers to IP addr
+ */
+
+ gmal_entry = (struct fc_gmal_entry_s *)gmal_resp->ms_ma;
+ while (num_entries > 0) {
+ if (strncmp
+ (gmal_entry->prefix, CT_GMAL_RESP_PREFIX_HTTP,
+ sizeof(gmal_entry->prefix)) == 0) {
+
+ /*
+ * if the IP address is terminating with a '/',
+ * remove it. *Byte 0 consists of the length
+ * of the string.
+ */
+ rsp_str = &(gmal_entry->prefix[0]);
+ if (rsp_str[gmal_entry->len - 1] == '/')
+ rsp_str[gmal_entry->len - 1] = 0;
+ /*
+ * copy IP Address to fabric
+ */
+ strncpy(bfa_fcs_port_get_fabric_ipaddr(port),
+ gmal_entry->ip_addr,
+ BFA_FCS_FABRIC_IPADDR_SZ);
+ break;
+ } else {
+ --num_entries;
+ ++gmal_entry;
+ }
+ }
+
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_OK);
+ return;
+ }
+
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+}
+
+static void
+bfa_fcs_port_ms_sm_gfn_sending(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+ &ms->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_gfn(struct bfa_fcs_port_ms_s *ms, enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_RSP_ERROR:
+ /*
+ * Start timer for a delayed retry
+ */
+ if (ms->retry_cnt++ < BFA_FCS_MS_CMD_MAX_RETRIES) {
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_retry);
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ms->port),
+ &ms->timer, bfa_fcs_port_ms_timeout, ms,
+ BFA_FCS_RETRY_TIMEOUT);
+ } else {
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_online);
+ ms->retry_cnt = 0;
+ }
+ break;
+
+ case MSSM_EVENT_RSP_OK:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_online);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_fcxp_discard(ms->fcxp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ms_sm_gfn_retry(struct bfa_fcs_port_ms_s *ms,
+ enum port_ms_event event)
+{
+ bfa_trc(ms->port->fcs, ms->port->port_cfg.pwwn);
+ bfa_trc(ms->port->fcs, event);
+
+ switch (event) {
+ case MSSM_EVENT_TIMEOUT:
+ /*
+ * Retry Timer Expired. Re-send
+ */
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_gfn_sending);
+ bfa_fcs_port_ms_send_gfn(ms, NULL);
+ break;
+
+ case MSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+ bfa_timer_stop(&ms->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * ms_pvt MS local functions
+ */
+
+static void
+bfa_fcs_port_ms_send_gfn(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_ms_s *ms = ms_cbarg;
+ struct bfa_fcs_port_s *port = ms->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(port->fcs, port->pid);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &ms->fcxp_wqe,
+ bfa_fcs_port_ms_send_gfn, ms);
+ return;
+ }
+ ms->fcxp = fcxp;
+
+ len = fc_gfn_req_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_fcs_port_get_fcid(port),
+ bfa_lps_get_peer_nwwn(port->fabric->lps));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_ms_gfn_response,
+ (void *)ms, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ bfa_sm_send_event(ms, MSSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_port_ms_gfn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t req_status, u32 rsp_len,
+ u32 resid_len, struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_ms_s *ms = (struct bfa_fcs_port_ms_s *)cbarg;
+ struct bfa_fcs_port_s *port = ms->port;
+ struct ct_hdr_s *cthdr = NULL;
+ wwn_t *gfn_resp;
+
+ bfa_trc(port->fcs, req_status);
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ gfn_resp = (wwn_t *) (cthdr + 1);
+ /*
+ * check if it has actually changed
+ */
+ if ((memcmp
+ ((void *)&bfa_fcs_port_get_fabric_name(port), gfn_resp,
+ sizeof(wwn_t)) != 0))
+ bfa_fcs_fabric_set_fabric_name(port->fabric, *gfn_resp);
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_OK);
+ return;
+ }
+
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+}
+
+/**
+ * ms_pvt MS local functions
+ */
+
+static void
+bfa_fcs_port_ms_send_plogi(void *ms_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_ms_s *ms = ms_cbarg;
+ struct bfa_fcs_port_s *port = ms->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(port->fcs, port->pid);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ port->stats.ms_plogi_alloc_wait++;
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &ms->fcxp_wqe,
+ bfa_fcs_port_ms_send_plogi, ms);
+ return;
+ }
+ ms->fcxp = fcxp;
+
+ len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_os_hton3b(FC_MGMT_SERVER),
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.pwwn, port->port_cfg.nwwn,
+ bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_ms_plogi_response,
+ (void *)ms, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ port->stats.ms_plogi_sent++;
+ bfa_sm_send_event(ms, MSSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_port_ms_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_ms_s *ms = (struct bfa_fcs_port_ms_s *)cbarg;
+
+ struct bfa_fcs_port_s *port = ms->port;
+ struct fc_els_cmd_s *els_cmd;
+ struct fc_ls_rjt_s *ls_rjt;
+
+ bfa_trc(port->fcs, req_status);
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ port->stats.ms_plogi_rsp_err++;
+ bfa_trc(port->fcs, req_status);
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ switch (els_cmd->els_code) {
+
+ case FC_ELS_ACC:
+ if (rsp_len < sizeof(struct fc_logi_s)) {
+ bfa_trc(port->fcs, rsp_len);
+ port->stats.ms_plogi_acc_err++;
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+ break;
+ }
+ port->stats.ms_plogi_accepts++;
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_OK);
+ break;
+
+ case FC_ELS_LS_RJT:
+ ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ bfa_trc(port->fcs, ls_rjt->reason_code);
+ bfa_trc(port->fcs, ls_rjt->reason_code_expl);
+
+ port->stats.ms_rejects++;
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+ break;
+
+ default:
+ port->stats.ms_plogi_unknown_rsp++;
+ bfa_trc(port->fcs, els_cmd->els_code);
+ bfa_sm_send_event(ms, MSSM_EVENT_RSP_ERROR);
+ }
+}
+
+static void
+bfa_fcs_port_ms_timeout(void *arg)
+{
+ struct bfa_fcs_port_ms_s *ms = (struct bfa_fcs_port_ms_s *)arg;
+
+ ms->port->stats.ms_timeouts++;
+ bfa_sm_send_event(ms, MSSM_EVENT_TIMEOUT);
+}
+
+
+void
+bfa_fcs_port_ms_init(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_ms_s *ms = BFA_FCS_GET_MS_FROM_PORT(port);
+
+ ms->port = port;
+ bfa_sm_set_state(ms, bfa_fcs_port_ms_sm_offline);
+
+ /*
+ * Invoke init routines of sub modules.
+ */
+ bfa_fcs_port_fdmi_init(ms);
+}
+
+void
+bfa_fcs_port_ms_offline(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_ms_s *ms = BFA_FCS_GET_MS_FROM_PORT(port);
+
+ ms->port = port;
+ bfa_sm_send_event(ms, MSSM_EVENT_PORT_OFFLINE);
+}
+
+void
+bfa_fcs_port_ms_online(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_ms_s *ms = BFA_FCS_GET_MS_FROM_PORT(port);
+
+ ms->port = port;
+ bfa_sm_send_event(ms, MSSM_EVENT_PORT_ONLINE);
+}
+
+void
+bfa_fcs_port_ms_fabric_rscn(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_ms_s *ms = BFA_FCS_GET_MS_FROM_PORT(port);
+
+ /*
+ * @todo. Handle this only when in Online state
+ */
+ if (bfa_sm_cmp_state(ms, bfa_fcs_port_ms_sm_online))
+ bfa_sm_send_event(ms, MSSM_EVENT_PORT_FABRIC_RSCN);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * n2n.c n2n implementation.
+ */
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, N2N);
+
+/**
+ * Called by fcs/port to initialize N2N topology.
+ */
+void
+bfa_fcs_port_n2n_init(struct bfa_fcs_port_s *port)
+{
+}
+
+/**
+ * Called by fcs/port to notify transition to online state.
+ */
+void
+bfa_fcs_port_n2n_online(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_n2n_s *n2n_port = &port->port_topo.pn2n;
+ struct bfa_port_cfg_s *pcfg = &port->port_cfg;
+ struct bfa_fcs_rport_s *rport;
+
+ bfa_trc(port->fcs, pcfg->pwwn);
+
+ /*
+ * If our PWWN is > than that of the r-port, we have to initiate PLOGI
+ * and assign an Address. if not, we need to wait for its PLOGI.
+ *
+ * If our PWWN is < than that of the remote port, it will send a PLOGI
+ * with the PIDs assigned. The rport state machine take care of this
+ * incoming PLOGI.
+ */
+ if (memcmp
+ ((void *)&pcfg->pwwn, (void *)&n2n_port->rem_port_wwn,
+ sizeof(wwn_t)) > 0) {
+ port->pid = N2N_LOCAL_PID;
+ /**
+ * First, check if we know the device by pwwn.
+ */
+ rport = bfa_fcs_port_get_rport_by_pwwn(port,
+ n2n_port->rem_port_wwn);
+ if (rport) {
+ bfa_trc(port->fcs, rport->pid);
+ bfa_trc(port->fcs, rport->pwwn);
+ rport->pid = N2N_REMOTE_PID;
+ bfa_fcs_rport_online(rport);
+ return;
+ }
+
+ /*
+ * In n2n there can be only one rport. Delete the old one whose
+ * pid should be zero, because it is offline.
+ */
+ if (port->num_rports > 0) {
+ rport = bfa_fcs_port_get_rport_by_pid(port, 0);
+ bfa_assert(rport != NULL);
+ if (rport) {
+ bfa_trc(port->fcs, rport->pwwn);
+ bfa_fcs_rport_delete(rport);
+ }
+ }
+ bfa_fcs_rport_create(port, N2N_REMOTE_PID);
+ }
+}
+
+/**
+ * Called by fcs/port to notify transition to offline state.
+ */
+void
+bfa_fcs_port_n2n_offline(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_n2n_s *n2n_port = &port->port_topo.pn2n;
+
+ bfa_trc(port->fcs, port->pid);
+ port->pid = 0;
+ n2n_port->rem_port_wwn = 0;
+ n2n_port->reply_oxid = 0;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * @page ns_sm_info VPORT NS State Machine
+ *
+ * @section ns_sm_interactions VPORT NS State Machine Interactions
+ *
+ * @section ns_sm VPORT NS State Machine
+ * img ns_sm.jpg
+ */
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <bfa_iocfc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, NS);
+
+/*
+ * forward declarations
+ */
+static void bfa_fcs_port_ns_send_plogi(void *ns_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_ns_send_rspn_id(void *ns_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_ns_send_rft_id(void *ns_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_ns_send_rff_id(void *ns_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_ns_send_gid_ft(void *ns_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_ns_timeout(void *arg);
+static void bfa_fcs_port_ns_plogi_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_ns_rspn_id_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_ns_rft_id_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_ns_rff_id_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_ns_gid_ft_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_ns_process_gidft_pids(struct bfa_fcs_port_s *port,
+ u32 *pid_buf,
+ u32 n_pids);
+
+static void bfa_fcs_port_ns_boot_target_disc(struct bfa_fcs_port_s *port);
+/**
+ * fcs_ns_sm FCS nameserver interface state machine
+ */
+
+/**
+ * VPort NS State Machine events
+ */
+enum vport_ns_event {
+ NSSM_EVENT_PORT_ONLINE = 1,
+ NSSM_EVENT_PORT_OFFLINE = 2,
+ NSSM_EVENT_PLOGI_SENT = 3,
+ NSSM_EVENT_RSP_OK = 4,
+ NSSM_EVENT_RSP_ERROR = 5,
+ NSSM_EVENT_TIMEOUT = 6,
+ NSSM_EVENT_NS_QUERY = 7,
+ NSSM_EVENT_RSPNID_SENT = 8,
+ NSSM_EVENT_RFTID_SENT = 9,
+ NSSM_EVENT_RFFID_SENT = 10,
+ NSSM_EVENT_GIDFT_SENT = 11,
+};
+
+static void bfa_fcs_port_ns_sm_offline(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_plogi_sending(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_plogi(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_plogi_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_sending_rspn_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_rspn_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_rspn_id_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_sending_rft_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_rft_id_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_rft_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_sending_rff_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_rff_id_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_rff_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_sending_gid_ft(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_gid_ft(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_gid_ft_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+static void bfa_fcs_port_ns_sm_online(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event);
+/**
+ * Start in offline state - awaiting linkup
+ */
+static void
+bfa_fcs_port_ns_sm_offline(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_PORT_ONLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_plogi_sending);
+ bfa_fcs_port_ns_send_plogi(ns, NULL);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_plogi_sending(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_PLOGI_SENT:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_plogi);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+ &ns->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_plogi(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_RSP_ERROR:
+ /*
+ * Start timer for a delayed retry
+ */
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_plogi_retry);
+ ns->port->stats.ns_retries++;
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+ bfa_fcs_port_ns_timeout, ns,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case NSSM_EVENT_RSP_OK:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rspn_id);
+ bfa_fcs_port_ns_send_rspn_id(ns, NULL);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_discard(ns->fcxp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_plogi_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_TIMEOUT:
+ /*
+ * Retry Timer Expired. Re-send
+ */
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_plogi_sending);
+ bfa_fcs_port_ns_send_plogi(ns, NULL);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_timer_stop(&ns->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_sending_rspn_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_RSPNID_SENT:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rspn_id);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+ &ns->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_rspn_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_RSP_ERROR:
+ /*
+ * Start timer for a delayed retry
+ */
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rspn_id_retry);
+ ns->port->stats.ns_retries++;
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+ bfa_fcs_port_ns_timeout, ns,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case NSSM_EVENT_RSP_OK:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rft_id);
+ bfa_fcs_port_ns_send_rft_id(ns, NULL);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_fcxp_discard(ns->fcxp);
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_rspn_id_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_TIMEOUT:
+ /*
+ * Retry Timer Expired. Re-send
+ */
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rspn_id);
+ bfa_fcs_port_ns_send_rspn_id(ns, NULL);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_timer_stop(&ns->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_sending_rft_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_RFTID_SENT:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rft_id);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+ &ns->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_rft_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_RSP_OK:
+ /*
+ * Now move to register FC4 Features
+ */
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rff_id);
+ bfa_fcs_port_ns_send_rff_id(ns, NULL);
+ break;
+
+ case NSSM_EVENT_RSP_ERROR:
+ /*
+ * Start timer for a delayed retry
+ */
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rft_id_retry);
+ ns->port->stats.ns_retries++;
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+ bfa_fcs_port_ns_timeout, ns,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_discard(ns->fcxp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_rft_id_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_TIMEOUT:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rft_id);
+ bfa_fcs_port_ns_send_rft_id(ns, NULL);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_timer_stop(&ns->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_sending_rff_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_RFFID_SENT:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rff_id);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+ &ns->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_rff_id(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_RSP_OK:
+
+ /*
+ * If min cfg mode is enabled, we donot initiate rport
+ * discovery with the fabric. Instead, we will retrieve the
+ * boot targets from HAL/FW.
+ */
+ if (__fcs_min_cfg(ns->port->fcs)) {
+ bfa_fcs_port_ns_boot_target_disc(ns->port);
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_online);
+ return;
+ }
+
+ /*
+ * If the port role is Initiator Mode issue NS query.
+ * If it is Target Mode, skip this and go to online.
+ */
+ if (BFA_FCS_VPORT_IS_INITIATOR_MODE(ns->port)) {
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_gid_ft);
+ bfa_fcs_port_ns_send_gid_ft(ns, NULL);
+ } else if (BFA_FCS_VPORT_IS_TARGET_MODE(ns->port)) {
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_online);
+ }
+ /*
+ * kick off mgmt srvr state machine
+ */
+ bfa_fcs_port_ms_online(ns->port);
+ break;
+
+ case NSSM_EVENT_RSP_ERROR:
+ /*
+ * Start timer for a delayed retry
+ */
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_rff_id_retry);
+ ns->port->stats.ns_retries++;
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+ bfa_fcs_port_ns_timeout, ns,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_discard(ns->fcxp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_rff_id_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_TIMEOUT:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_rff_id);
+ bfa_fcs_port_ns_send_rff_id(ns, NULL);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_timer_stop(&ns->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+static void
+bfa_fcs_port_ns_sm_sending_gid_ft(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_GIDFT_SENT:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_gid_ft);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_walloc_cancel(BFA_FCS_GET_HAL_FROM_PORT(ns->port),
+ &ns->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_gid_ft(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_RSP_OK:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_online);
+ break;
+
+ case NSSM_EVENT_RSP_ERROR:
+ /*
+ * TBD: for certain reject codes, we don't need to retry
+ */
+ /*
+ * Start timer for a delayed retry
+ */
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_gid_ft_retry);
+ ns->port->stats.ns_retries++;
+ bfa_timer_start(BFA_FCS_GET_HAL_FROM_PORT(ns->port), &ns->timer,
+ bfa_fcs_port_ns_timeout, ns,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_fcxp_discard(ns->fcxp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_gid_ft_retry(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_TIMEOUT:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_gid_ft);
+ bfa_fcs_port_ns_send_gid_ft(ns, NULL);
+ break;
+
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ bfa_timer_stop(&ns->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_ns_sm_online(struct bfa_fcs_port_ns_s *ns,
+ enum vport_ns_event event)
+{
+ bfa_trc(ns->port->fcs, ns->port->port_cfg.pwwn);
+ bfa_trc(ns->port->fcs, event);
+
+ switch (event) {
+ case NSSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+ break;
+
+ case NSSM_EVENT_NS_QUERY:
+ /*
+ * If the port role is Initiator Mode issue NS query.
+ * If it is Target Mode, skip this and go to online.
+ */
+ if (BFA_FCS_VPORT_IS_INITIATOR_MODE(ns->port)) {
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_sending_gid_ft);
+ bfa_fcs_port_ns_send_gid_ft(ns, NULL);
+ };
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * ns_pvt Nameserver local functions
+ */
+
+static void
+bfa_fcs_port_ns_send_plogi(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(port->fcs, port->pid);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ port->stats.ns_plogi_alloc_wait++;
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+ bfa_fcs_port_ns_send_plogi, ns);
+ return;
+ }
+ ns->fcxp = fcxp;
+
+ len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_os_hton3b(FC_NAME_SERVER),
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.pwwn, port->port_cfg.nwwn,
+ bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_plogi_response,
+ (void *)ns, FC_MAX_PDUSZ, FC_RA_TOV);
+ port->stats.ns_plogi_sent++;
+
+ bfa_sm_send_event(ns, NSSM_EVENT_PLOGI_SENT);
+}
+
+static void
+bfa_fcs_port_ns_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ /* struct fc_logi_s *plogi_resp; */
+ struct fc_els_cmd_s *els_cmd;
+ struct fc_ls_rjt_s *ls_rjt;
+
+ bfa_trc(port->fcs, req_status);
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ port->stats.ns_plogi_rsp_err++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ switch (els_cmd->els_code) {
+
+ case FC_ELS_ACC:
+ if (rsp_len < sizeof(struct fc_logi_s)) {
+ bfa_trc(port->fcs, rsp_len);
+ port->stats.ns_plogi_acc_err++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ break;
+ }
+ port->stats.ns_plogi_accepts++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+ break;
+
+ case FC_ELS_LS_RJT:
+ ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ bfa_trc(port->fcs, ls_rjt->reason_code);
+ bfa_trc(port->fcs, ls_rjt->reason_code_expl);
+
+ port->stats.ns_rejects++;
+
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ break;
+
+ default:
+ port->stats.ns_plogi_unknown_rsp++;
+ bfa_trc(port->fcs, els_cmd->els_code);
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ }
+}
+
+/**
+ * Register the symbolic port name.
+ */
+static void
+bfa_fcs_port_ns_send_rspn_id(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+ u8 symbl[256];
+ u8 *psymbl = &symbl[0];
+
+ bfa_os_memset(symbl, 0, sizeof(symbl));
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ port->stats.ns_rspnid_alloc_wait++;
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+ bfa_fcs_port_ns_send_rspn_id, ns);
+ return;
+ }
+ ns->fcxp = fcxp;
+
+ /*
+ * for V-Port, form a Port Symbolic Name
+ */
+ if (port->vport) {
+ /**For Vports,
+ * we append the vport's port symbolic name to that of the base port.
+ */
+
+ strncpy((char *)psymbl,
+ (char *)
+ &(bfa_fcs_port_get_psym_name
+ (bfa_fcs_get_base_port(port->fcs))),
+ strlen((char *)
+ &bfa_fcs_port_get_psym_name(bfa_fcs_get_base_port
+ (port->fcs))));
+
+ /*
+ * Ensure we have a null terminating string.
+ */
+ ((char *)
+ psymbl)[strlen((char *)
+ &bfa_fcs_port_get_psym_name
+ (bfa_fcs_get_base_port(port->fcs)))] = 0;
+
+ strncat((char *)psymbl,
+ (char *)&(bfa_fcs_port_get_psym_name(port)),
+ strlen((char *)&bfa_fcs_port_get_psym_name(port)));
+ } else {
+ psymbl = (u8 *) &(bfa_fcs_port_get_psym_name(port));
+ }
+
+ len = fc_rspnid_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_fcs_port_get_fcid(port), 0, psymbl);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_rspn_id_response,
+ (void *)ns, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ port->stats.ns_rspnid_sent++;
+
+ bfa_sm_send_event(ns, NSSM_EVENT_RSPNID_SENT);
+}
+
+static void
+bfa_fcs_port_ns_rspn_id_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct ct_hdr_s *cthdr = NULL;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ port->stats.ns_rspnid_rsp_err++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ port->stats.ns_rspnid_accepts++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+ return;
+ }
+
+ port->stats.ns_rspnid_rejects++;
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+}
+
+/**
+ * Register FC4-Types
+ * TBD, Need to retrieve this from the OS driver, in case IPFC is enabled ?
+ */
+static void
+bfa_fcs_port_ns_send_rft_id(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ port->stats.ns_rftid_alloc_wait++;
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+ bfa_fcs_port_ns_send_rft_id, ns);
+ return;
+ }
+ ns->fcxp = fcxp;
+
+ len = fc_rftid_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.roles);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_rft_id_response,
+ (void *)ns, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ port->stats.ns_rftid_sent++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RFTID_SENT);
+}
+
+static void
+bfa_fcs_port_ns_rft_id_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct ct_hdr_s *cthdr = NULL;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ port->stats.ns_rftid_rsp_err++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ port->stats.ns_rftid_accepts++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+ return;
+ }
+
+ port->stats.ns_rftid_rejects++;
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+}
+
+/**
+* Register FC4-Features : Should be done after RFT_ID
+ */
+static void
+bfa_fcs_port_ns_send_rff_id(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+ u8 fc4_ftrs = 0;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ port->stats.ns_rffid_alloc_wait++;
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+ bfa_fcs_port_ns_send_rff_id, ns);
+ return;
+ }
+ ns->fcxp = fcxp;
+
+ if (BFA_FCS_VPORT_IS_INITIATOR_MODE(ns->port)) {
+ fc4_ftrs = FC_GS_FCP_FC4_FEATURE_INITIATOR;
+ } else if (BFA_FCS_VPORT_IS_TARGET_MODE(ns->port)) {
+ fc4_ftrs = FC_GS_FCP_FC4_FEATURE_TARGET;
+ }
+
+ len = fc_rffid_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_fcs_port_get_fcid(port), 0, FC_TYPE_FCP,
+ fc4_ftrs);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_rff_id_response,
+ (void *)ns, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ port->stats.ns_rffid_sent++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RFFID_SENT);
+}
+
+static void
+bfa_fcs_port_ns_rff_id_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct ct_hdr_s *cthdr = NULL;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ port->stats.ns_rffid_rsp_err++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ port->stats.ns_rffid_accepts++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+ return;
+ }
+
+ port->stats.ns_rffid_rejects++;
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+
+ if (cthdr->reason_code == CT_RSN_NOT_SUPP) {
+ /*
+ * if this command is not supported, we don't retry
+ */
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+ } else {
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ }
+}
+
+/**
+ * Query Fabric for FC4-Types Devices.
+ *
+* TBD : Need to use a local (FCS private) response buffer, since the response
+ * can be larger than 2K.
+ */
+static void
+bfa_fcs_port_ns_send_gid_ft(void *ns_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_ns_s *ns = ns_cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(port->fcs, port->pid);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ port->stats.ns_gidft_alloc_wait++;
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &ns->fcxp_wqe,
+ bfa_fcs_port_ns_send_gid_ft, ns);
+ return;
+ }
+ ns->fcxp = fcxp;
+
+ /*
+ * This query is only initiated for FCP initiator mode.
+ */
+ len = fc_gid_ft_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), ns->port->pid,
+ FC_TYPE_FCP);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_ns_gid_ft_response,
+ (void *)ns, bfa_fcxp_get_maxrsp(port->fcs->bfa),
+ FC_RA_TOV);
+
+ port->stats.ns_gidft_sent++;
+
+ bfa_sm_send_event(ns, NSSM_EVENT_GIDFT_SENT);
+}
+
+static void
+bfa_fcs_port_ns_gid_ft_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)cbarg;
+ struct bfa_fcs_port_s *port = ns->port;
+ struct ct_hdr_s *cthdr = NULL;
+ u32 n_pids;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ port->stats.ns_gidft_rsp_err++;
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ if (resid_len != 0) {
+ /*
+ * TBD : we will need to allocate a larger buffer & retry the
+ * command
+ */
+ bfa_trc(port->fcs, rsp_len);
+ bfa_trc(port->fcs, resid_len);
+ return;
+ }
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ switch (cthdr->cmd_rsp_code) {
+
+ case CT_RSP_ACCEPT:
+
+ port->stats.ns_gidft_accepts++;
+ n_pids = (fc_get_ctresp_pyld_len(rsp_len) / sizeof(u32));
+ bfa_trc(port->fcs, n_pids);
+ bfa_fcs_port_ns_process_gidft_pids(port,
+ (u32 *) (cthdr + 1),
+ n_pids);
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+ break;
+
+ case CT_RSP_REJECT:
+
+ /*
+ * Check the reason code & explanation.
+ * There may not have been any FC4 devices in the fabric
+ */
+ port->stats.ns_gidft_rejects++;
+ bfa_trc(port->fcs, cthdr->reason_code);
+ bfa_trc(port->fcs, cthdr->exp_code);
+
+ if ((cthdr->reason_code == CT_RSN_UNABLE_TO_PERF)
+ && (cthdr->exp_code == CT_NS_EXP_FT_NOT_REG)) {
+
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_OK);
+ } else {
+ /*
+ * for all other errors, retry
+ */
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ }
+ break;
+
+ default:
+ port->stats.ns_gidft_unknown_rsp++;
+ bfa_trc(port->fcs, cthdr->cmd_rsp_code);
+ bfa_sm_send_event(ns, NSSM_EVENT_RSP_ERROR);
+ }
+}
+
+/**
+ * This routine will be called by bfa_timer on timer timeouts.
+ *
+ * param[in] port - pointer to bfa_fcs_port_t.
+ *
+ * return
+ * void
+ *
+* Special Considerations:
+ *
+ * note
+ */
+static void
+bfa_fcs_port_ns_timeout(void *arg)
+{
+ struct bfa_fcs_port_ns_s *ns = (struct bfa_fcs_port_ns_s *)arg;
+
+ ns->port->stats.ns_timeouts++;
+ bfa_sm_send_event(ns, NSSM_EVENT_TIMEOUT);
+}
+
+/*
+ * Process the PID list in GID_FT response
+ */
+static void
+bfa_fcs_port_ns_process_gidft_pids(struct bfa_fcs_port_s *port,
+ u32 *pid_buf, u32 n_pids)
+{
+ struct fcgs_gidft_resp_s *gidft_entry;
+ struct bfa_fcs_rport_s *rport;
+ u32 ii;
+
+ for (ii = 0; ii < n_pids; ii++) {
+ gidft_entry = (struct fcgs_gidft_resp_s *) &pid_buf[ii];
+
+ if (gidft_entry->pid == port->pid)
+ continue;
+
+ /*
+ * Check if this rport already exists
+ */
+ rport = bfa_fcs_port_get_rport_by_pid(port, gidft_entry->pid);
+ if (rport == NULL) {
+ /*
+ * this is a new device. create rport
+ */
+ rport = bfa_fcs_rport_create(port, gidft_entry->pid);
+ } else {
+ /*
+ * this rport already exists
+ */
+ bfa_fcs_rport_scn(rport);
+ }
+
+ bfa_trc(port->fcs, gidft_entry->pid);
+
+ /*
+ * if the last entry bit is set, bail out.
+ */
+ if (gidft_entry->last)
+ return;
+ }
+}
+
+/**
+ * fcs_ns_public FCS nameserver public interfaces
+ */
+
+/*
+ * Functions called by port/fab.
+ * These will send relevant Events to the ns state machine.
+ */
+void
+bfa_fcs_port_ns_init(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_ns_s *ns = BFA_FCS_GET_NS_FROM_PORT(port);
+
+ ns->port = port;
+ bfa_sm_set_state(ns, bfa_fcs_port_ns_sm_offline);
+}
+
+void
+bfa_fcs_port_ns_offline(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_ns_s *ns = BFA_FCS_GET_NS_FROM_PORT(port);
+
+ ns->port = port;
+ bfa_sm_send_event(ns, NSSM_EVENT_PORT_OFFLINE);
+}
+
+void
+bfa_fcs_port_ns_online(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_ns_s *ns = BFA_FCS_GET_NS_FROM_PORT(port);
+
+ ns->port = port;
+ bfa_sm_send_event(ns, NSSM_EVENT_PORT_ONLINE);
+}
+
+void
+bfa_fcs_port_ns_query(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_ns_s *ns = BFA_FCS_GET_NS_FROM_PORT(port);
+
+ bfa_trc(port->fcs, port->pid);
+ bfa_sm_send_event(ns, NSSM_EVENT_NS_QUERY);
+}
+
+static void
+bfa_fcs_port_ns_boot_target_disc(struct bfa_fcs_port_s *port)
+{
+
+ struct bfa_fcs_rport_s *rport;
+ u8 nwwns;
+ wwn_t *wwns;
+ int ii;
+
+ bfa_iocfc_get_bootwwns(port->fcs->bfa, &nwwns, &wwns);
+
+ for (ii = 0; ii < nwwns; ++ii) {
+ rport = bfa_fcs_rport_create_by_wwn(port, wwns[ii]);
+ bfa_assert(rport);
+ }
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa_os_inc.h>
+#include <cs/bfa_plog.h>
+#include <cs/bfa_debug.h>
+
+static int
+plkd_validate_logrec(struct bfa_plog_rec_s *pl_rec)
+{
+ if ((pl_rec->log_type != BFA_PL_LOG_TYPE_INT)
+ && (pl_rec->log_type != BFA_PL_LOG_TYPE_STRING))
+ return 1;
+
+ if ((pl_rec->log_type != BFA_PL_LOG_TYPE_INT)
+ && (pl_rec->log_num_ints > BFA_PL_INT_LOG_SZ))
+ return 1;
+
+ return 0;
+}
+
+static void
+bfa_plog_add(struct bfa_plog_s *plog, struct bfa_plog_rec_s *pl_rec)
+{
+ u16 tail;
+ struct bfa_plog_rec_s *pl_recp;
+
+ if (plog->plog_enabled == 0)
+ return;
+
+ if (plkd_validate_logrec(pl_rec)) {
+ bfa_assert(0);
+ return;
+ }
+
+ tail = plog->tail;
+
+ pl_recp = &(plog->plog_recs[tail]);
+
+ bfa_os_memcpy(pl_recp, pl_rec, sizeof(struct bfa_plog_rec_s));
+
+ pl_recp->tv = BFA_TRC_TS(plog);
+ BFA_PL_LOG_REC_INCR(plog->tail);
+
+ if (plog->head == plog->tail)
+ BFA_PL_LOG_REC_INCR(plog->head);
+}
+
+void
+bfa_plog_init(struct bfa_plog_s *plog)
+{
+ bfa_os_memset((char *)plog, 0, sizeof(struct bfa_plog_s));
+
+ bfa_os_memcpy(plog->plog_sig, BFA_PL_SIG_STR, BFA_PL_SIG_LEN);
+ plog->head = plog->tail = 0;
+ plog->plog_enabled = 1;
+}
+
+void
+bfa_plog_str(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event,
+ u16 misc, char *log_str)
+{
+ struct bfa_plog_rec_s lp;
+
+ if (plog->plog_enabled) {
+ bfa_os_memset(&lp, 0, sizeof(struct bfa_plog_rec_s));
+ lp.mid = mid;
+ lp.eid = event;
+ lp.log_type = BFA_PL_LOG_TYPE_STRING;
+ lp.misc = misc;
+ strncpy(lp.log_entry.string_log, log_str,
+ BFA_PL_STRING_LOG_SZ - 1);
+ lp.log_entry.string_log[BFA_PL_STRING_LOG_SZ - 1] = '\0';
+ bfa_plog_add(plog, &lp);
+ }
+}
+
+void
+bfa_plog_intarr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event,
+ u16 misc, u32 *intarr, u32 num_ints)
+{
+ struct bfa_plog_rec_s lp;
+ u32 i;
+
+ if (num_ints > BFA_PL_INT_LOG_SZ)
+ num_ints = BFA_PL_INT_LOG_SZ;
+
+ if (plog->plog_enabled) {
+ bfa_os_memset(&lp, 0, sizeof(struct bfa_plog_rec_s));
+ lp.mid = mid;
+ lp.eid = event;
+ lp.log_type = BFA_PL_LOG_TYPE_INT;
+ lp.misc = misc;
+
+ for (i = 0; i < num_ints; i++)
+ bfa_os_assign(lp.log_entry.int_log[i],
+ intarr[i]);
+
+ lp.log_num_ints = (u8) num_ints;
+
+ bfa_plog_add(plog, &lp);
+ }
+}
+
+void
+bfa_plog_fchdr(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event,
+ u16 misc, struct fchs_s *fchdr)
+{
+ struct bfa_plog_rec_s lp;
+ u32 *tmp_int = (u32 *) fchdr;
+ u32 ints[BFA_PL_INT_LOG_SZ];
+
+ if (plog->plog_enabled) {
+ bfa_os_memset(&lp, 0, sizeof(struct bfa_plog_rec_s));
+
+ ints[0] = tmp_int[0];
+ ints[1] = tmp_int[1];
+ ints[2] = tmp_int[4];
+
+ bfa_plog_intarr(plog, mid, event, misc, ints, 3);
+ }
+}
+
+void
+bfa_plog_fchdr_and_pl(struct bfa_plog_s *plog, enum bfa_plog_mid mid,
+ enum bfa_plog_eid event, u16 misc, struct fchs_s *fchdr,
+ u32 pld_w0)
+{
+ struct bfa_plog_rec_s lp;
+ u32 *tmp_int = (u32 *) fchdr;
+ u32 ints[BFA_PL_INT_LOG_SZ];
+
+ if (plog->plog_enabled) {
+ bfa_os_memset(&lp, 0, sizeof(struct bfa_plog_rec_s));
+
+ ints[0] = tmp_int[0];
+ ints[1] = tmp_int[1];
+ ints[2] = tmp_int[4];
+ ints[3] = pld_w0;
+
+ bfa_plog_intarr(plog, mid, event, misc, ints, 4);
+ }
+}
+
+void
+bfa_plog_clear(struct bfa_plog_s *plog)
+{
+ plog->head = plog->tail = 0;
+}
+
+void
+bfa_plog_enable(struct bfa_plog_s *plog)
+{
+ plog->plog_enabled = 1;
+}
+
+void
+bfa_plog_disable(struct bfa_plog_s *plog)
+{
+ plog->plog_enabled = 0;
+}
+
+bfa_boolean_t
+bfa_plog_get_setting(struct bfa_plog_s *plog)
+{
+ return((bfa_boolean_t)plog->plog_enabled);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * rport.c Remote port implementation.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcbuild.h"
+#include "fcs_vport.h"
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_fcpim.h"
+#include "fcs_fcptm.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+#include <fcb/bfa_fcb_rport.h>
+#include <aen/bfa_aen_rport.h>
+
+BFA_TRC_FILE(FCS, RPORT);
+
+#define BFA_FCS_RPORT_MAX_RETRIES (5)
+
+/* In millisecs */
+static u32 bfa_fcs_rport_del_timeout =
+ BFA_FCS_RPORT_DEF_DEL_TIMEOUT * 1000;
+
+/*
+ * forward declarations
+ */
+static struct bfa_fcs_rport_s *bfa_fcs_rport_alloc(struct bfa_fcs_port_s *port,
+ wwn_t pwwn, u32 rpid);
+static void bfa_fcs_rport_free(struct bfa_fcs_rport_s *rport);
+static void bfa_fcs_rport_hal_online(struct bfa_fcs_rport_s *rport);
+static void bfa_fcs_rport_online_action(struct bfa_fcs_rport_s *rport);
+static void bfa_fcs_rport_offline_action(struct bfa_fcs_rport_s *rport);
+static void bfa_fcs_rport_update(struct bfa_fcs_rport_s *rport,
+ struct fc_logi_s *plogi);
+static void bfa_fcs_rport_fc4_pause(struct bfa_fcs_rport_s *rport);
+static void bfa_fcs_rport_fc4_resume(struct bfa_fcs_rport_s *rport);
+static void bfa_fcs_rport_timeout(void *arg);
+static void bfa_fcs_rport_send_plogi(void *rport_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_rport_send_plogiacc(void *rport_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_rport_plogi_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_rport_send_adisc(void *rport_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_rport_adisc_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_rport_send_gidpn(void *rport_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_rport_gidpn_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_rport_send_logo(void *rport_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_rport_send_logo_acc(void *rport_cbarg);
+static void bfa_fcs_rport_process_prli(struct bfa_fcs_rport_s *rport,
+ struct fchs_s *rx_fchs, u16 len);
+static void bfa_fcs_rport_send_ls_rjt(struct bfa_fcs_rport_s *rport,
+ struct fchs_s *rx_fchs, u8 reason_code,
+ u8 reason_code_expl);
+static void bfa_fcs_rport_process_adisc(struct bfa_fcs_rport_s *rport,
+ struct fchs_s *rx_fchs, u16 len);
+/**
+ * fcs_rport_sm FCS rport state machine events
+ */
+
+enum rport_event {
+ RPSM_EVENT_PLOGI_SEND = 1, /* new rport; start with PLOGI */
+ RPSM_EVENT_PLOGI_RCVD = 2, /* Inbound PLOGI from remote port */
+ RPSM_EVENT_PLOGI_COMP = 3, /* PLOGI completed to rport */
+ RPSM_EVENT_LOGO_RCVD = 4, /* LOGO from remote device */
+ RPSM_EVENT_LOGO_IMP = 5, /* implicit logo for SLER */
+ RPSM_EVENT_FCXP_SENT = 6, /* Frame from has been sent */
+ RPSM_EVENT_DELETE = 7, /* RPORT delete request */
+ RPSM_EVENT_SCN = 8, /* state change notification */
+ RPSM_EVENT_ACCEPTED = 9,/* Good response from remote device */
+ RPSM_EVENT_FAILED = 10, /* Request to rport failed. */
+ RPSM_EVENT_TIMEOUT = 11, /* Rport SM timeout event */
+ RPSM_EVENT_HCB_ONLINE = 12, /* BFA rport online callback */
+ RPSM_EVENT_HCB_OFFLINE = 13, /* BFA rport offline callback */
+ RPSM_EVENT_FC4_OFFLINE = 14, /* FC-4 offline complete */
+ RPSM_EVENT_ADDRESS_CHANGE = 15, /* Rport's PID has changed */
+ RPSM_EVENT_ADDRESS_DISC = 16 /* Need to Discover rport's PID */
+};
+
+static void bfa_fcs_rport_sm_uninit(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_plogi_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_plogiacc_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_plogi_retry(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_plogi(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_hal_online(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_online(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_nsquery_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_nsquery(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_adisc_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_adisc(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_fc4_logorcv(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_fc4_logosend(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_fc4_offline(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_hcb_offline(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_hcb_logorcv(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_hcb_logosend(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_logo_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_offline(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_nsdisc_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_nsdisc_retry(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_nsdisc_sent(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+static void bfa_fcs_rport_sm_nsdisc_sent(struct bfa_fcs_rport_s *rport,
+ enum rport_event event);
+
+static struct bfa_sm_table_s rport_sm_table[] = {
+ {BFA_SM(bfa_fcs_rport_sm_uninit), BFA_RPORT_UNINIT},
+ {BFA_SM(bfa_fcs_rport_sm_plogi_sending), BFA_RPORT_PLOGI},
+ {BFA_SM(bfa_fcs_rport_sm_plogiacc_sending), BFA_RPORT_ONLINE},
+ {BFA_SM(bfa_fcs_rport_sm_plogi_retry), BFA_RPORT_PLOGI_RETRY},
+ {BFA_SM(bfa_fcs_rport_sm_plogi), BFA_RPORT_PLOGI},
+ {BFA_SM(bfa_fcs_rport_sm_hal_online), BFA_RPORT_ONLINE},
+ {BFA_SM(bfa_fcs_rport_sm_online), BFA_RPORT_ONLINE},
+ {BFA_SM(bfa_fcs_rport_sm_nsquery_sending), BFA_RPORT_NSQUERY},
+ {BFA_SM(bfa_fcs_rport_sm_nsquery), BFA_RPORT_NSQUERY},
+ {BFA_SM(bfa_fcs_rport_sm_adisc_sending), BFA_RPORT_ADISC},
+ {BFA_SM(bfa_fcs_rport_sm_adisc), BFA_RPORT_ADISC},
+ {BFA_SM(bfa_fcs_rport_sm_fc4_logorcv), BFA_RPORT_LOGORCV},
+ {BFA_SM(bfa_fcs_rport_sm_fc4_logosend), BFA_RPORT_LOGO},
+ {BFA_SM(bfa_fcs_rport_sm_fc4_offline), BFA_RPORT_OFFLINE},
+ {BFA_SM(bfa_fcs_rport_sm_hcb_offline), BFA_RPORT_OFFLINE},
+ {BFA_SM(bfa_fcs_rport_sm_hcb_logorcv), BFA_RPORT_LOGORCV},
+ {BFA_SM(bfa_fcs_rport_sm_hcb_logosend), BFA_RPORT_LOGO},
+ {BFA_SM(bfa_fcs_rport_sm_logo_sending), BFA_RPORT_LOGO},
+ {BFA_SM(bfa_fcs_rport_sm_offline), BFA_RPORT_OFFLINE},
+ {BFA_SM(bfa_fcs_rport_sm_nsdisc_sending), BFA_RPORT_NSDISC},
+ {BFA_SM(bfa_fcs_rport_sm_nsdisc_retry), BFA_RPORT_NSDISC},
+ {BFA_SM(bfa_fcs_rport_sm_nsdisc_sent), BFA_RPORT_NSDISC},
+};
+
+/**
+ * Beginning state.
+ */
+static void
+bfa_fcs_rport_sm_uninit(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_PLOGI_SEND:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+ rport->plogi_retries = 0;
+ bfa_fcs_rport_send_plogi(rport, NULL);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ case RPSM_EVENT_ADDRESS_DISC:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * PLOGI is being sent.
+ */
+static void
+bfa_fcs_rport_sm_plogi_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ break;
+
+ case RPSM_EVENT_SCN:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * PLOGI is being sent.
+ */
+static void
+bfa_fcs_rport_sm_plogiacc_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ /**
+ * Ignore, SCN is possibly online notification.
+ */
+ break;
+
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ break;
+
+ case RPSM_EVENT_HCB_OFFLINE:
+ /**
+ * Ignore BFA callback, on a PLOGI receive we call bfa offline.
+ */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * PLOGI is sent.
+ */
+static void
+bfa_fcs_rport_sm_plogi_retry(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_SCN:
+ bfa_timer_stop(&rport->timer);
+ /*
+ * !! fall through !!
+ */
+
+ case RPSM_EVENT_TIMEOUT:
+ rport->plogi_retries++;
+ if (rport->plogi_retries < BFA_FCS_RPORT_MAX_RETRIES) {
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+ bfa_fcs_rport_send_plogi(rport, NULL);
+ } else {
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ }
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_timer_stop(&rport->timer);
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_timer_stop(&rport->timer);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * PLOGI is sent.
+ */
+static void
+bfa_fcs_rport_sm_plogi(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_ACCEPTED:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ rport->plogi_retries = 0;
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_fcs_rport_send_logo_acc(rport);
+ bfa_fcxp_discard(rport->fcxp);
+ /*
+ * !! fall through !!
+ */
+ case RPSM_EVENT_FAILED:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_retry);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ break;
+
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_SCN:
+ /**
+ * Ignore SCN - wait for PLOGI response.
+ */
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * PLOGI is complete. Awaiting BFA rport online callback. FC-4s
+ * are offline.
+ */
+static void
+bfa_fcs_rport_sm_hal_online(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_HCB_ONLINE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_online);
+ bfa_fcs_rport_online_action(rport);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logorcv);
+ bfa_rport_offline(rport->bfa_rport);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
+ bfa_rport_offline(rport->bfa_rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_rport_offline(rport->bfa_rport);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logosend);
+ bfa_rport_offline(rport->bfa_rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ /**
+ * @todo
+ * Ignore SCN - PLOGI just completed, FC-4 login should detect
+ * device failures.
+ */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport is ONLINE. FC-4s active.
+ */
+static void
+bfa_fcs_rport_sm_online(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_SCN:
+ /**
+ * Pause FC-4 activity till rport is authenticated.
+ * In switched fabrics, check presence of device in nameserver
+ * first.
+ */
+ bfa_fcs_rport_fc4_pause(rport);
+
+ if (bfa_fcs_fabric_is_switched(rport->port->fabric)) {
+ bfa_sm_set_state(rport,
+ bfa_fcs_rport_sm_nsquery_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ } else {
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_sending);
+ bfa_fcs_rport_send_adisc(rport, NULL);
+ }
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ case RPSM_EVENT_LOGO_IMP:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * An SCN event is received in ONLINE state. NS query is being sent
+ * prior to ADISC authentication with rport. FC-4s are paused.
+ */
+static void
+bfa_fcs_rport_sm_nsquery_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsquery);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ /**
+ * ignore SCN, wait for response to query itself
+ */
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ case RPSM_EVENT_PLOGI_COMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * An SCN event is received in ONLINE state. NS query is sent to rport.
+ * FC-4s are paused.
+ */
+static void
+bfa_fcs_rport_sm_nsquery(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_ACCEPTED:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc_sending);
+ bfa_fcs_rport_send_adisc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_FAILED:
+ rport->ns_retries++;
+ if (rport->ns_retries < BFA_FCS_RPORT_MAX_RETRIES) {
+ bfa_sm_set_state(rport,
+ bfa_fcs_rport_sm_nsquery_sending);
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ } else {
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+ bfa_fcs_rport_offline_action(rport);
+ }
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ case RPSM_EVENT_PLOGI_RCVD:
+ case RPSM_EVENT_LOGO_IMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * An SCN event is received in ONLINE state. ADISC is being sent for
+ * authenticating with rport. FC-4s are paused.
+ */
+static void
+bfa_fcs_rport_sm_adisc_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_adisc);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * An SCN event is received in ONLINE state. ADISC is to rport.
+ * FC-4s are paused.
+ */
+static void
+bfa_fcs_rport_sm_adisc(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_ACCEPTED:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_online);
+ bfa_fcs_rport_fc4_resume(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ /**
+ * Too complex to cleanup FC-4 & rport and then acc to PLOGI.
+ * At least go offline when a PLOGI is received.
+ */
+ bfa_fcxp_discard(rport->fcxp);
+ /*
+ * !!! fall through !!!
+ */
+
+ case RPSM_EVENT_FAILED:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ /**
+ * already processing RSCN
+ */
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_offline);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logorcv);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_offline_action(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport has sent LOGO. Awaiting FC-4 offline completion callback.
+ */
+static void
+bfa_fcs_rport_sm_fc4_logorcv(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FC4_OFFLINE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logorcv);
+ bfa_rport_offline(rport->bfa_rport);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * LOGO needs to be sent to rport. Awaiting FC-4 offline completion
+ * callback.
+ */
+static void
+bfa_fcs_rport_sm_fc4_logosend(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FC4_OFFLINE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logosend);
+ bfa_rport_offline(rport->bfa_rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport is going offline. Awaiting FC-4 offline completion callback.
+ */
+static void
+bfa_fcs_rport_sm_fc4_offline(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FC4_OFFLINE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
+ bfa_rport_offline(rport->bfa_rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ case RPSM_EVENT_LOGO_IMP:
+ case RPSM_EVENT_LOGO_RCVD:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ /**
+ * rport is already going offline.
+ * SCN - ignore and wait till transitioning to offline state
+ */
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_fc4_logosend);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport is offline. FC-4s are offline. Awaiting BFA rport offline
+ * callback.
+ */
+static void
+bfa_fcs_rport_sm_hcb_offline(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_HCB_OFFLINE:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ if (bfa_fcs_port_is_online(rport->port)) {
+ bfa_sm_set_state(rport,
+ bfa_fcs_rport_sm_nsdisc_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ } else {
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ }
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ case RPSM_EVENT_LOGO_RCVD:
+ /**
+ * Ignore, already offline.
+ */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport is offline. FC-4s are offline. Awaiting BFA rport offline
+ * callback to send LOGO accept.
+ */
+static void
+bfa_fcs_rport_sm_hcb_logorcv(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_HCB_OFFLINE:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ if (rport->pid)
+ bfa_fcs_rport_send_logo_acc(rport);
+ /*
+ * If the lport is online and if the rport is not a well known
+ * address port, we try to re-discover the r-port.
+ */
+ if (bfa_fcs_port_is_online(rport->port)
+ && (!BFA_FCS_PID_IS_WKA(rport->pid))) {
+ bfa_sm_set_state(rport,
+ bfa_fcs_rport_sm_nsdisc_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ } else {
+ /*
+ * if it is not a well known address, reset the pid to
+ *
+ */
+ if (!BFA_FCS_PID_IS_WKA(rport->pid))
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ }
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_logosend);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hcb_offline);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ /**
+ * Ignore - already processing a LOGO.
+ */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport is being deleted. FC-4s are offline. Awaiting BFA rport offline
+ * callback to send LOGO.
+ */
+static void
+bfa_fcs_rport_sm_hcb_logosend(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_HCB_OFFLINE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_logo_sending);
+ bfa_fcs_rport_send_logo(rport, NULL);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport is being deleted. FC-4s are offline. LOGO is being sent.
+ */
+static void
+bfa_fcs_rport_sm_logo_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FCXP_SENT:
+ /*
+ * Once LOGO is sent, we donot wait for the response
+ */
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport is offline. FC-4s are offline. BFA rport is offline.
+ * Timer active to delete stale rport.
+ */
+static void
+bfa_fcs_rport_sm_offline(struct bfa_fcs_rport_s *rport, enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_TIMEOUT:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_SCN:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+ bfa_timer_stop(&rport->timer);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ case RPSM_EVENT_LOGO_IMP:
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_SEND:
+ bfa_timer_stop(&rport->timer);
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+ rport->plogi_retries = 0;
+ bfa_fcs_rport_send_plogi(rport, NULL);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport address has changed. Nameserver discovery request is being sent.
+ */
+static void
+bfa_fcs_rport_sm_nsdisc_sending(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sent);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_SCN:
+ case RPSM_EVENT_LOGO_RCVD:
+ case RPSM_EVENT_PLOGI_SEND:
+ break;
+
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ rport->ns_retries = 0; /* reset the retry count */
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rport->fcxp_wqe);
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Nameserver discovery failed. Waiting for timeout to retry.
+ */
+static void
+bfa_fcs_rport_sm_nsdisc_retry(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_TIMEOUT:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ break;
+
+ case RPSM_EVENT_SCN:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_nsdisc_sending);
+ bfa_timer_stop(&rport->timer);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_timer_stop(&rport->timer);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ bfa_fcs_rport_send_logo_acc(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ bfa_timer_stop(&rport->timer);
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Rport address has changed. Nameserver discovery request is sent.
+ */
+static void
+bfa_fcs_rport_sm_nsdisc_sent(struct bfa_fcs_rport_s *rport,
+ enum rport_event event)
+{
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPSM_EVENT_ACCEPTED:
+ case RPSM_EVENT_ADDRESS_CHANGE:
+ if (rport->pid) {
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogi_sending);
+ bfa_fcs_rport_send_plogi(rport, NULL);
+ } else {
+ bfa_sm_set_state(rport,
+ bfa_fcs_rport_sm_nsdisc_sending);
+ rport->ns_retries = 0;
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ }
+ break;
+
+ case RPSM_EVENT_FAILED:
+ rport->ns_retries++;
+ if (rport->ns_retries < BFA_FCS_RPORT_MAX_RETRIES) {
+ bfa_sm_set_state(rport,
+ bfa_fcs_rport_sm_nsdisc_sending);
+ bfa_fcs_rport_send_gidpn(rport, NULL);
+ } else {
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ };
+ break;
+
+ case RPSM_EVENT_DELETE:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_free(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_RCVD:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_plogiacc_sending);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_send_plogiacc(rport, NULL);
+ break;
+
+ case RPSM_EVENT_LOGO_IMP:
+ rport->pid = 0;
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_offline);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_timer_start(rport->fcs->bfa, &rport->timer,
+ bfa_fcs_rport_timeout, rport,
+ bfa_fcs_rport_del_timeout);
+ break;
+
+ case RPSM_EVENT_SCN:
+ /**
+ * ignore, wait for NS query response
+ */
+ break;
+
+ case RPSM_EVENT_LOGO_RCVD:
+ /**
+ * Not logged-in yet. Accept LOGO.
+ */
+ bfa_fcs_rport_send_logo_acc(rport);
+ break;
+
+ case RPSM_EVENT_PLOGI_COMP:
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_hal_online);
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_fcs_rport_hal_online(rport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * fcs_rport_private FCS RPORT provate functions
+ */
+
+static void
+bfa_fcs_rport_send_plogi(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_rport_s *rport = rport_cbarg;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+ bfa_fcs_rport_send_plogi, rport);
+ return;
+ }
+ rport->fcxp = fcxp;
+
+ len = fc_plogi_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.pwwn, port->port_cfg.nwwn,
+ bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_rport_plogi_response,
+ (void *)rport, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ rport->stats.plogis++;
+ bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_rport_plogi_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t req_status, u32 rsp_len,
+ u32 resid_len, struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+ struct fc_logi_s *plogi_rsp;
+ struct fc_ls_rjt_s *ls_rjt;
+ struct bfa_fcs_rport_s *twin;
+ struct list_head *qe;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(rport->fcs, req_status);
+ rport->stats.plogi_failed++;
+ bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+ return;
+ }
+
+ plogi_rsp = (struct fc_logi_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ /**
+ * Check for failure first.
+ */
+ if (plogi_rsp->els_cmd.els_code != FC_ELS_ACC) {
+ ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ bfa_trc(rport->fcs, ls_rjt->reason_code);
+ bfa_trc(rport->fcs, ls_rjt->reason_code_expl);
+
+ rport->stats.plogi_rejects++;
+ bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+ return;
+ }
+
+ /**
+ * PLOGI is complete. Make sure this device is not one of the known
+ * device with a new FC port address.
+ */
+ list_for_each(qe, &rport->port->rport_q) {
+ twin = (struct bfa_fcs_rport_s *)qe;
+ if (twin == rport)
+ continue;
+ if (!rport->pwwn && (plogi_rsp->port_name == twin->pwwn)) {
+ bfa_trc(rport->fcs, twin->pid);
+ bfa_trc(rport->fcs, rport->pid);
+
+ /*
+ * Update plogi stats in twin
+ */
+ twin->stats.plogis += rport->stats.plogis;
+ twin->stats.plogi_rejects += rport->stats.plogi_rejects;
+ twin->stats.plogi_timeouts +=
+ rport->stats.plogi_timeouts;
+ twin->stats.plogi_failed += rport->stats.plogi_failed;
+ twin->stats.plogi_rcvd += rport->stats.plogi_rcvd;
+ twin->stats.plogi_accs++;
+
+ bfa_fcs_rport_delete(rport);
+
+ bfa_fcs_rport_update(twin, plogi_rsp);
+ twin->pid = rsp_fchs->s_id;
+ bfa_sm_send_event(twin, RPSM_EVENT_PLOGI_COMP);
+ return;
+ }
+ }
+
+ /**
+ * Normal login path -- no evil twins.
+ */
+ rport->stats.plogi_accs++;
+ bfa_fcs_rport_update(rport, plogi_rsp);
+ bfa_sm_send_event(rport, RPSM_EVENT_ACCEPTED);
+}
+
+static void
+bfa_fcs_rport_send_plogiacc(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_rport_s *rport = rport_cbarg;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->reply_oxid);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+ bfa_fcs_rport_send_plogiacc, rport);
+ return;
+ }
+ rport->fcxp = fcxp;
+
+ len = fc_plogi_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+ bfa_fcs_port_get_fcid(port), rport->reply_oxid,
+ port->port_cfg.pwwn, port->port_cfg.nwwn,
+ bfa_pport_get_maxfrsize(port->fcs->bfa));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+
+ bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_rport_send_adisc(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_rport_s *rport = rport_cbarg;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+ bfa_fcs_rport_send_adisc, rport);
+ return;
+ }
+ rport->fcxp = fcxp;
+
+ len = fc_adisc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+ bfa_fcs_port_get_fcid(port), 0,
+ port->port_cfg.pwwn, port->port_cfg.nwwn);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_rport_adisc_response,
+ rport, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ rport->stats.adisc_sent++;
+ bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_rport_adisc_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t req_status, u32 rsp_len,
+ u32 resid_len, struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+ void *pld = bfa_fcxp_get_rspbuf(fcxp);
+ struct fc_ls_rjt_s *ls_rjt;
+
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(rport->fcs, req_status);
+ rport->stats.adisc_failed++;
+ bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+ return;
+ }
+
+ if (fc_adisc_rsp_parse((struct fc_adisc_s *)pld, rsp_len, rport->pwwn,
+ rport->nwwn) == FC_PARSE_OK) {
+ rport->stats.adisc_accs++;
+ bfa_sm_send_event(rport, RPSM_EVENT_ACCEPTED);
+ return;
+ }
+
+ rport->stats.adisc_rejects++;
+ ls_rjt = pld;
+ bfa_trc(rport->fcs, ls_rjt->els_cmd.els_code);
+ bfa_trc(rport->fcs, ls_rjt->reason_code);
+ bfa_trc(rport->fcs, ls_rjt->reason_code_expl);
+ bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+}
+
+static void
+bfa_fcs_rport_send_gidpn(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_rport_s *rport = rport_cbarg;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ int len;
+
+ bfa_trc(rport->fcs, rport->pid);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+ bfa_fcs_rport_send_gidpn, rport);
+ return;
+ }
+ rport->fcxp = fcxp;
+
+ len = fc_gidpn_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_fcs_port_get_fcid(port), 0, rport->pwwn);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_rport_gidpn_response,
+ (void *)rport, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+static void
+bfa_fcs_rport_gidpn_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t req_status, u32 rsp_len,
+ u32 resid_len, struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+ struct bfa_fcs_rport_s *twin;
+ struct list_head *qe;
+ struct ct_hdr_s *cthdr;
+ struct fcgs_gidpn_resp_s *gidpn_rsp;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+
+ cthdr = (struct ct_hdr_s *) BFA_FCXP_RSP_PLD(fcxp);
+ cthdr->cmd_rsp_code = bfa_os_ntohs(cthdr->cmd_rsp_code);
+
+ if (cthdr->cmd_rsp_code == CT_RSP_ACCEPT) {
+ /*
+ * Check if the pid is the same as before.
+ */
+ gidpn_rsp = (struct fcgs_gidpn_resp_s *) (cthdr + 1);
+
+ if (gidpn_rsp->dap == rport->pid) {
+ /*
+ * Device is online
+ */
+ bfa_sm_send_event(rport, RPSM_EVENT_ACCEPTED);
+ } else {
+ /*
+ * Device's PID has changed. We need to cleanup and
+ * re-login. If there is another device with the the
+ * newly discovered pid, send an scn notice so that its
+ * new pid can be discovered.
+ */
+ list_for_each(qe, &rport->port->rport_q) {
+ twin = (struct bfa_fcs_rport_s *)qe;
+ if (twin == rport)
+ continue;
+ if (gidpn_rsp->dap == twin->pid) {
+ bfa_trc(rport->fcs, twin->pid);
+ bfa_trc(rport->fcs, rport->pid);
+
+ twin->pid = 0;
+ bfa_sm_send_event(twin,
+ RPSM_EVENT_ADDRESS_CHANGE);
+ }
+ }
+ rport->pid = gidpn_rsp->dap;
+ bfa_sm_send_event(rport, RPSM_EVENT_ADDRESS_CHANGE);
+ }
+ return;
+ }
+
+ /*
+ * Reject Response
+ */
+ switch (cthdr->reason_code) {
+ case CT_RSN_LOGICAL_BUSY:
+ /*
+ * Need to retry
+ */
+ bfa_sm_send_event(rport, RPSM_EVENT_TIMEOUT);
+ break;
+
+ case CT_RSN_UNABLE_TO_PERF:
+ /*
+ * device doesn't exist : Start timer to cleanup this later.
+ */
+ bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+ break;
+
+ default:
+ bfa_sm_send_event(rport, RPSM_EVENT_FAILED);
+ break;
+ }
+}
+
+/**
+ * Called to send a logout to the rport.
+ */
+static void
+bfa_fcs_rport_send_logo(void *rport_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_rport_s *rport = rport_cbarg;
+ struct bfa_fcs_port_s *port;
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ u16 len;
+
+ bfa_trc(rport->fcs, rport->pid);
+
+ port = rport->port;
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &rport->fcxp_wqe,
+ bfa_fcs_rport_send_logo, rport);
+ return;
+ }
+ rport->fcxp = fcxp;
+
+ len = fc_logo_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+ bfa_fcs_port_get_fcid(port), 0,
+ bfa_fcs_port_get_pwwn(port));
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, NULL, rport, FC_MAX_PDUSZ,
+ FC_ED_TOV);
+
+ rport->stats.logos++;
+ bfa_fcxp_discard(rport->fcxp);
+ bfa_sm_send_event(rport, RPSM_EVENT_FCXP_SENT);
+}
+
+/**
+ * Send ACC for a LOGO received.
+ */
+static void
+bfa_fcs_rport_send_logo_acc(void *rport_cbarg)
+{
+ struct bfa_fcs_rport_s *rport = rport_cbarg;
+ struct bfa_fcs_port_s *port;
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ u16 len;
+
+ bfa_trc(rport->fcs, rport->pid);
+
+ port = rport->port;
+
+ fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp)
+ return;
+
+ rport->stats.logo_rcvd++;
+ len = fc_logo_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+ bfa_fcs_port_get_fcid(port), rport->reply_oxid);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+}
+
+/**
+ * This routine will be called by bfa_timer on timer timeouts.
+ *
+ * param[in] rport - pointer to bfa_fcs_port_ns_t.
+ * param[out] rport_status - pointer to return vport status in
+ *
+ * return
+ * void
+ *
+* Special Considerations:
+ *
+ * note
+ */
+static void
+bfa_fcs_rport_timeout(void *arg)
+{
+ struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)arg;
+
+ rport->stats.plogi_timeouts++;
+ bfa_sm_send_event(rport, RPSM_EVENT_TIMEOUT);
+}
+
+static void
+bfa_fcs_rport_process_prli(struct bfa_fcs_rport_s *rport,
+ struct fchs_s *rx_fchs, u16 len)
+{
+ struct bfa_fcxp_s *fcxp;
+ struct fchs_s fchs;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fc_prli_s *prli;
+
+ bfa_trc(port->fcs, rx_fchs->s_id);
+ bfa_trc(port->fcs, rx_fchs->d_id);
+
+ rport->stats.prli_rcvd++;
+
+ if (BFA_FCS_VPORT_IS_TARGET_MODE(port)) {
+ /*
+ * Target Mode : Let the fcptm handle it
+ */
+ bfa_fcs_tin_rx_prli(rport->tin, rx_fchs, len);
+ return;
+ }
+
+ /*
+ * We are either in Initiator or ipfc Mode
+ */
+ prli = (struct fc_prli_s *) (rx_fchs + 1);
+
+ if (prli->parampage.servparams.initiator) {
+ bfa_trc(rport->fcs, prli->parampage.type);
+ rport->scsi_function = BFA_RPORT_INITIATOR;
+ bfa_fcs_itnim_is_initiator(rport->itnim);
+ } else {
+ /*
+ * @todo: PRLI from a target ?
+ */
+ bfa_trc(port->fcs, rx_fchs->s_id);
+ rport->scsi_function = BFA_RPORT_TARGET;
+ }
+
+ fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp)
+ return;
+
+ len = fc_prli_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+ bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+ port->port_cfg.roles);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+}
+
+static void
+bfa_fcs_rport_process_rpsc(struct bfa_fcs_rport_s *rport,
+ struct fchs_s *rx_fchs, u16 len)
+{
+ struct bfa_fcxp_s *fcxp;
+ struct fchs_s fchs;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fc_rpsc_speed_info_s speeds;
+ struct bfa_pport_attr_s pport_attr;
+
+ bfa_trc(port->fcs, rx_fchs->s_id);
+ bfa_trc(port->fcs, rx_fchs->d_id);
+
+ rport->stats.rpsc_rcvd++;
+ speeds.port_speed_cap =
+ RPSC_SPEED_CAP_1G | RPSC_SPEED_CAP_2G | RPSC_SPEED_CAP_4G |
+ RPSC_SPEED_CAP_8G;
+
+ /*
+ * get curent speed from pport attributes from BFA
+ */
+ bfa_pport_get_attr(port->fcs->bfa, &pport_attr);
+
+ speeds.port_op_speed = fc_bfa_speed_to_rpsc_operspeed(pport_attr.speed);
+
+ fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp)
+ return;
+
+ len = fc_rpsc_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+ bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+ &speeds);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+}
+
+static void
+bfa_fcs_rport_process_adisc(struct bfa_fcs_rport_s *rport,
+ struct fchs_s *rx_fchs, u16 len)
+{
+ struct bfa_fcxp_s *fcxp;
+ struct fchs_s fchs;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fc_adisc_s *adisc;
+
+ bfa_trc(port->fcs, rx_fchs->s_id);
+ bfa_trc(port->fcs, rx_fchs->d_id);
+
+ rport->stats.adisc_rcvd++;
+
+ if (BFA_FCS_VPORT_IS_TARGET_MODE(port)) {
+ /*
+ * @todo : Target Mode handling
+ */
+ bfa_trc(port->fcs, rx_fchs->d_id);
+ bfa_assert(0);
+ return;
+ }
+
+ adisc = (struct fc_adisc_s *) (rx_fchs + 1);
+
+ /*
+ * Accept if the itnim for this rport is online. Else reject the ADISC
+ */
+ if (bfa_fcs_itnim_get_online_state(rport->itnim) == BFA_STATUS_OK) {
+
+ fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp)
+ return;
+
+ len = fc_adisc_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ rx_fchs->s_id,
+ bfa_fcs_port_get_fcid(port),
+ rx_fchs->ox_id, port->port_cfg.pwwn,
+ port->port_cfg.nwwn);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag,
+ BFA_FALSE, FC_CLASS_3, len, &fchs, NULL, NULL,
+ FC_MAX_PDUSZ, 0);
+ } else {
+ rport->stats.adisc_rejected++;
+ bfa_fcs_rport_send_ls_rjt(rport, rx_fchs,
+ FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD,
+ FC_LS_RJT_EXP_LOGIN_REQUIRED);
+ }
+
+}
+
+static void
+bfa_fcs_rport_hal_online(struct bfa_fcs_rport_s *rport)
+{
+ struct bfa_fcs_port_s *port = rport->port;
+ struct bfa_rport_info_s rport_info;
+
+ rport_info.pid = rport->pid;
+ rport_info.local_pid = port->pid;
+ rport_info.lp_tag = port->lp_tag;
+ rport_info.vf_id = port->fabric->vf_id;
+ rport_info.vf_en = port->fabric->is_vf;
+ rport_info.fc_class = rport->fc_cos;
+ rport_info.cisc = rport->cisc;
+ rport_info.max_frmsz = rport->maxfrsize;
+ bfa_rport_online(rport->bfa_rport, &rport_info);
+}
+
+static void
+bfa_fcs_rport_fc4_pause(struct bfa_fcs_rport_s *rport)
+{
+ if (bfa_fcs_port_is_initiator(rport->port))
+ bfa_fcs_itnim_pause(rport->itnim);
+
+ if (bfa_fcs_port_is_target(rport->port))
+ bfa_fcs_tin_pause(rport->tin);
+}
+
+static void
+bfa_fcs_rport_fc4_resume(struct bfa_fcs_rport_s *rport)
+{
+ if (bfa_fcs_port_is_initiator(rport->port))
+ bfa_fcs_itnim_resume(rport->itnim);
+
+ if (bfa_fcs_port_is_target(rport->port))
+ bfa_fcs_tin_resume(rport->tin);
+}
+
+static struct bfa_fcs_rport_s *
+bfa_fcs_rport_alloc(struct bfa_fcs_port_s *port, wwn_t pwwn, u32 rpid)
+{
+ struct bfa_fcs_s *fcs = port->fcs;
+ struct bfa_fcs_rport_s *rport;
+ struct bfad_rport_s *rport_drv;
+
+ /**
+ * allocate rport
+ */
+ if (bfa_fcb_rport_alloc(fcs->bfad, &rport, &rport_drv)
+ != BFA_STATUS_OK) {
+ bfa_trc(fcs, rpid);
+ return NULL;
+ }
+
+ /*
+ * Initialize r-port
+ */
+ rport->port = port;
+ rport->fcs = fcs;
+ rport->rp_drv = rport_drv;
+ rport->pid = rpid;
+ rport->pwwn = pwwn;
+
+ /**
+ * allocate BFA rport
+ */
+ rport->bfa_rport = bfa_rport_create(port->fcs->bfa, rport);
+ if (!rport->bfa_rport) {
+ bfa_trc(fcs, rpid);
+ kfree(rport_drv);
+ return NULL;
+ }
+
+ /**
+ * allocate FC-4s
+ */
+ bfa_assert(bfa_fcs_port_is_initiator(port) ^
+ bfa_fcs_port_is_target(port));
+
+ if (bfa_fcs_port_is_initiator(port)) {
+ rport->itnim = bfa_fcs_itnim_create(rport);
+ if (!rport->itnim) {
+ bfa_trc(fcs, rpid);
+ bfa_rport_delete(rport->bfa_rport);
+ kfree(rport_drv);
+ return NULL;
+ }
+ }
+
+ if (bfa_fcs_port_is_target(port)) {
+ rport->tin = bfa_fcs_tin_create(rport);
+ if (!rport->tin) {
+ bfa_trc(fcs, rpid);
+ bfa_rport_delete(rport->bfa_rport);
+ kfree(rport_drv);
+ return NULL;
+ }
+ }
+
+ bfa_fcs_port_add_rport(port, rport);
+
+ bfa_sm_set_state(rport, bfa_fcs_rport_sm_uninit);
+
+ /*
+ * Initialize the Rport Features(RPF) Sub Module
+ */
+ if (!BFA_FCS_PID_IS_WKA(rport->pid))
+ bfa_fcs_rpf_init(rport);
+
+ return rport;
+}
+
+
+static void
+bfa_fcs_rport_free(struct bfa_fcs_rport_s *rport)
+{
+ struct bfa_fcs_port_s *port = rport->port;
+
+ /**
+ * - delete FC-4s
+ * - delete BFA rport
+ * - remove from queue of rports
+ */
+ if (bfa_fcs_port_is_initiator(port))
+ bfa_fcs_itnim_delete(rport->itnim);
+
+ if (bfa_fcs_port_is_target(port))
+ bfa_fcs_tin_delete(rport->tin);
+
+ bfa_rport_delete(rport->bfa_rport);
+ bfa_fcs_port_del_rport(port, rport);
+ kfree(rport->rp_drv);
+}
+
+static void
+bfa_fcs_rport_aen_post(struct bfa_fcs_rport_s *rport,
+ enum bfa_rport_aen_event event,
+ struct bfa_rport_aen_data_s *data)
+{
+ union bfa_aen_data_u aen_data;
+ struct bfa_log_mod_s *logmod = rport->fcs->logm;
+ wwn_t lpwwn = bfa_fcs_port_get_pwwn(rport->port);
+ wwn_t rpwwn = rport->pwwn;
+ char lpwwn_ptr[BFA_STRING_32];
+ char rpwwn_ptr[BFA_STRING_32];
+ char *prio_str[] = { "unknown", "high", "medium", "low" };
+
+ wwn2str(lpwwn_ptr, lpwwn);
+ wwn2str(rpwwn_ptr, rpwwn);
+
+ switch (event) {
+ case BFA_RPORT_AEN_ONLINE:
+ bfa_log(logmod, BFA_AEN_RPORT_ONLINE, rpwwn_ptr, lpwwn_ptr);
+ break;
+ case BFA_RPORT_AEN_OFFLINE:
+ bfa_log(logmod, BFA_AEN_RPORT_OFFLINE, rpwwn_ptr, lpwwn_ptr);
+ break;
+ case BFA_RPORT_AEN_DISCONNECT:
+ bfa_log(logmod, BFA_AEN_RPORT_DISCONNECT, rpwwn_ptr, lpwwn_ptr);
+ break;
+ case BFA_RPORT_AEN_QOS_PRIO:
+ aen_data.rport.priv.qos = data->priv.qos;
+ bfa_log(logmod, BFA_AEN_RPORT_QOS_PRIO,
+ prio_str[aen_data.rport.priv.qos.qos_priority],
+ rpwwn_ptr, lpwwn_ptr);
+ break;
+ case BFA_RPORT_AEN_QOS_FLOWID:
+ aen_data.rport.priv.qos = data->priv.qos;
+ bfa_log(logmod, BFA_AEN_RPORT_QOS_FLOWID,
+ aen_data.rport.priv.qos.qos_flow_id, rpwwn_ptr,
+ lpwwn_ptr);
+ break;
+ default:
+ break;
+ }
+
+ aen_data.rport.vf_id = rport->port->fabric->vf_id;
+ aen_data.rport.ppwwn =
+ bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(rport->fcs));
+ aen_data.rport.lpwwn = lpwwn;
+ aen_data.rport.rpwwn = rpwwn;
+}
+
+static void
+bfa_fcs_rport_online_action(struct bfa_fcs_rport_s *rport)
+{
+ struct bfa_fcs_port_s *port = rport->port;
+
+ rport->stats.onlines++;
+
+ if (bfa_fcs_port_is_initiator(port)) {
+ bfa_fcs_itnim_rport_online(rport->itnim);
+ if (!BFA_FCS_PID_IS_WKA(rport->pid))
+ bfa_fcs_rpf_rport_online(rport);
+ };
+
+ if (bfa_fcs_port_is_target(port))
+ bfa_fcs_tin_rport_online(rport->tin);
+
+ /*
+ * Don't post events for well known addresses
+ */
+ if (!BFA_FCS_PID_IS_WKA(rport->pid))
+ bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_ONLINE, NULL);
+}
+
+static void
+bfa_fcs_rport_offline_action(struct bfa_fcs_rport_s *rport)
+{
+ struct bfa_fcs_port_s *port = rport->port;
+
+ rport->stats.offlines++;
+
+ /*
+ * Don't post events for well known addresses
+ */
+ if (!BFA_FCS_PID_IS_WKA(rport->pid)) {
+ if (bfa_fcs_port_is_online(rport->port) == BFA_TRUE) {
+ bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_DISCONNECT,
+ NULL);
+ } else {
+ bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_OFFLINE,
+ NULL);
+ }
+ }
+
+ if (bfa_fcs_port_is_initiator(port)) {
+ bfa_fcs_itnim_rport_offline(rport->itnim);
+ if (!BFA_FCS_PID_IS_WKA(rport->pid))
+ bfa_fcs_rpf_rport_offline(rport);
+ }
+
+ if (bfa_fcs_port_is_target(port))
+ bfa_fcs_tin_rport_offline(rport->tin);
+}
+
+/**
+ * Update rport parameters from PLOGI or PLOGI accept.
+ */
+static void
+bfa_fcs_rport_update(struct bfa_fcs_rport_s *rport, struct fc_logi_s *plogi)
+{
+ struct bfa_fcs_port_s *port = rport->port;
+
+ /**
+ * - port name
+ * - node name
+ */
+ rport->pwwn = plogi->port_name;
+ rport->nwwn = plogi->node_name;
+
+ /**
+ * - class of service
+ */
+ rport->fc_cos = 0;
+ if (plogi->class3.class_valid)
+ rport->fc_cos = FC_CLASS_3;
+
+ if (plogi->class2.class_valid)
+ rport->fc_cos |= FC_CLASS_2;
+
+ /**
+ * - CISC
+ * - MAX receive frame size
+ */
+ rport->cisc = plogi->csp.cisc;
+ rport->maxfrsize = bfa_os_ntohs(plogi->class3.rxsz);
+
+ bfa_trc(port->fcs, bfa_os_ntohs(plogi->csp.bbcred));
+ bfa_trc(port->fcs, port->fabric->bb_credit);
+ /**
+ * Direct Attach P2P mode :
+ * This is to handle a bug (233476) in IBM targets in Direct Attach
+ * Mode. Basically, in FLOGI Accept the target would have erroneously
+ * set the BB Credit to the value used in the FLOGI sent by the HBA.
+ * It uses the correct value (its own BB credit) in PLOGI.
+ */
+ if ((!bfa_fcs_fabric_is_switched(port->fabric))
+ && (bfa_os_ntohs(plogi->csp.bbcred) < port->fabric->bb_credit)) {
+
+ bfa_trc(port->fcs, bfa_os_ntohs(plogi->csp.bbcred));
+ bfa_trc(port->fcs, port->fabric->bb_credit);
+
+ port->fabric->bb_credit = bfa_os_ntohs(plogi->csp.bbcred);
+ bfa_pport_set_tx_bbcredit(port->fcs->bfa,
+ port->fabric->bb_credit);
+ }
+
+}
+
+/**
+ * Called to handle LOGO received from an existing remote port.
+ */
+static void
+bfa_fcs_rport_process_logo(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs)
+{
+ rport->reply_oxid = fchs->ox_id;
+ bfa_trc(rport->fcs, rport->reply_oxid);
+
+ rport->stats.logo_rcvd++;
+ bfa_sm_send_event(rport, RPSM_EVENT_LOGO_RCVD);
+}
+
+
+
+/**
+ * fcs_rport_public FCS rport public interfaces
+ */
+
+/**
+ * Called by bport/vport to create a remote port instance for a discovered
+ * remote device.
+ *
+ * @param[in] port - base port or vport
+ * @param[in] rpid - remote port ID
+ *
+ * @return None
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_rport_create(struct bfa_fcs_port_s *port, u32 rpid)
+{
+ struct bfa_fcs_rport_s *rport;
+
+ bfa_trc(port->fcs, rpid);
+ rport = bfa_fcs_rport_alloc(port, WWN_NULL, rpid);
+ if (!rport)
+ return NULL;
+
+ bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_SEND);
+ return rport;
+}
+
+/**
+ * Called to create a rport for which only the wwn is known.
+ *
+ * @param[in] port - base port
+ * @param[in] rpwwn - remote port wwn
+ *
+ * @return None
+ */
+struct bfa_fcs_rport_s *
+bfa_fcs_rport_create_by_wwn(struct bfa_fcs_port_s *port, wwn_t rpwwn)
+{
+ struct bfa_fcs_rport_s *rport;
+
+ bfa_trc(port->fcs, rpwwn);
+ rport = bfa_fcs_rport_alloc(port, rpwwn, 0);
+ if (!rport)
+ return NULL;
+
+ bfa_sm_send_event(rport, RPSM_EVENT_ADDRESS_DISC);
+ return rport;
+}
+
+/**
+ * Called by bport in private loop topology to indicate that a
+ * rport has been discovered and plogi has been completed.
+ *
+ * @param[in] port - base port or vport
+ * @param[in] rpid - remote port ID
+ */
+void
+bfa_fcs_rport_start(struct bfa_fcs_port_s *port, struct fchs_s *fchs,
+ struct fc_logi_s *plogi)
+{
+ struct bfa_fcs_rport_s *rport;
+
+ rport = bfa_fcs_rport_alloc(port, WWN_NULL, fchs->s_id);
+ if (!rport)
+ return;
+
+ bfa_fcs_rport_update(rport, plogi);
+
+ bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_COMP);
+}
+
+/**
+ * Called by bport/vport to handle PLOGI received from a new remote port.
+ * If an existing rport does a plogi, it will be handled separately.
+ */
+void
+bfa_fcs_rport_plogi_create(struct bfa_fcs_port_s *port, struct fchs_s *fchs,
+ struct fc_logi_s *plogi)
+{
+ struct bfa_fcs_rport_s *rport;
+
+ rport = bfa_fcs_rport_alloc(port, plogi->port_name, fchs->s_id);
+ if (!rport)
+ return;
+
+ bfa_fcs_rport_update(rport, plogi);
+
+ rport->reply_oxid = fchs->ox_id;
+ bfa_trc(rport->fcs, rport->reply_oxid);
+
+ rport->stats.plogi_rcvd++;
+ bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_RCVD);
+}
+
+static int
+wwn_compare(wwn_t wwn1, wwn_t wwn2)
+{
+ u8 *b1 = (u8 *) &wwn1;
+ u8 *b2 = (u8 *) &wwn2;
+ int i;
+
+ for (i = 0; i < sizeof(wwn_t); i++) {
+ if (b1[i] < b2[i])
+ return -1;
+ if (b1[i] > b2[i])
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * Called by bport/vport to handle PLOGI received from an existing
+ * remote port.
+ */
+void
+bfa_fcs_rport_plogi(struct bfa_fcs_rport_s *rport, struct fchs_s *rx_fchs,
+ struct fc_logi_s *plogi)
+{
+ /**
+ * @todo Handle P2P and initiator-initiator.
+ */
+
+ bfa_fcs_rport_update(rport, plogi);
+
+ rport->reply_oxid = rx_fchs->ox_id;
+ bfa_trc(rport->fcs, rport->reply_oxid);
+
+ /**
+ * In Switched fabric topology,
+ * PLOGI to each other. If our pwwn is smaller, ignore it,
+ * if it is not a well known address.
+ * If the link topology is N2N,
+ * this Plogi should be accepted.
+ */
+ if ((wwn_compare(rport->port->port_cfg.pwwn, rport->pwwn) == -1)
+ && (bfa_fcs_fabric_is_switched(rport->port->fabric))
+ && (!BFA_FCS_PID_IS_WKA(rport->pid))) {
+ bfa_trc(rport->fcs, rport->pid);
+ return;
+ }
+
+ rport->stats.plogi_rcvd++;
+ bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_RCVD);
+}
+
+/**
+ * Called by bport/vport to delete a remote port instance.
+ *
+* Rport delete is called under the following conditions:
+ * - vport is deleted
+ * - vf is deleted
+ * - explicit request from OS to delete rport (vmware)
+ */
+void
+bfa_fcs_rport_delete(struct bfa_fcs_rport_s *rport)
+{
+ bfa_sm_send_event(rport, RPSM_EVENT_DELETE);
+}
+
+/**
+ * Called by bport/vport to when a target goes offline.
+ *
+ */
+void
+bfa_fcs_rport_offline(struct bfa_fcs_rport_s *rport)
+{
+ bfa_sm_send_event(rport, RPSM_EVENT_LOGO_IMP);
+}
+
+/**
+ * Called by bport in n2n when a target (attached port) becomes online.
+ *
+ */
+void
+bfa_fcs_rport_online(struct bfa_fcs_rport_s *rport)
+{
+ bfa_sm_send_event(rport, RPSM_EVENT_PLOGI_SEND);
+}
+
+/**
+ * Called by bport/vport to notify SCN for the remote port
+ */
+void
+bfa_fcs_rport_scn(struct bfa_fcs_rport_s *rport)
+{
+
+ rport->stats.rscns++;
+ bfa_sm_send_event(rport, RPSM_EVENT_SCN);
+}
+
+/**
+ * Called by fcpim to notify that the ITN cleanup is done.
+ */
+void
+bfa_fcs_rport_itnim_ack(struct bfa_fcs_rport_s *rport)
+{
+ bfa_sm_send_event(rport, RPSM_EVENT_FC4_OFFLINE);
+}
+
+/**
+ * Called by fcptm to notify that the ITN cleanup is done.
+ */
+void
+bfa_fcs_rport_tin_ack(struct bfa_fcs_rport_s *rport)
+{
+ bfa_sm_send_event(rport, RPSM_EVENT_FC4_OFFLINE);
+}
+
+/**
+ * This routine BFA callback for bfa_rport_online() call.
+ *
+ * param[in] cb_arg - rport struct.
+ *
+ * return
+ * void
+ *
+* Special Considerations:
+ *
+ * note
+ */
+void
+bfa_cb_rport_online(void *cbarg)
+{
+
+ struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_sm_send_event(rport, RPSM_EVENT_HCB_ONLINE);
+}
+
+/**
+ * This routine BFA callback for bfa_rport_offline() call.
+ *
+ * param[in] rport -
+ *
+ * return
+ * void
+ *
+ * Special Considerations:
+ *
+ * note
+ */
+void
+bfa_cb_rport_offline(void *cbarg)
+{
+ struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_sm_send_event(rport, RPSM_EVENT_HCB_OFFLINE);
+}
+
+/**
+ * This routine is a static BFA callback when there is a QoS flow_id
+ * change notification
+ *
+ * @param[in] rport -
+ *
+ * @return void
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+void
+bfa_cb_rport_qos_scn_flowid(void *cbarg,
+ struct bfa_rport_qos_attr_s old_qos_attr,
+ struct bfa_rport_qos_attr_s new_qos_attr)
+{
+ struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+ struct bfa_rport_aen_data_s aen_data;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+ aen_data.priv.qos = new_qos_attr;
+ bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_QOS_FLOWID, &aen_data);
+}
+
+/**
+ * This routine is a static BFA callback when there is a QoS priority
+ * change notification
+ *
+ * @param[in] rport -
+ *
+ * @return void
+ *
+ * Special Considerations:
+ *
+ * @note
+ */
+void
+bfa_cb_rport_qos_scn_prio(void *cbarg, struct bfa_rport_qos_attr_s old_qos_attr,
+ struct bfa_rport_qos_attr_s new_qos_attr)
+{
+ struct bfa_fcs_rport_s *rport = (struct bfa_fcs_rport_s *)cbarg;
+ struct bfa_rport_aen_data_s aen_data;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+ aen_data.priv.qos = new_qos_attr;
+ bfa_fcs_rport_aen_post(rport, BFA_RPORT_AEN_QOS_PRIO, &aen_data);
+}
+
+/**
+ * Called to process any unsolicted frames from this remote port
+ */
+void
+bfa_fcs_rport_logo_imp(struct bfa_fcs_rport_s *rport)
+{
+ bfa_sm_send_event(rport, RPSM_EVENT_LOGO_IMP);
+}
+
+/**
+ * Called to process any unsolicted frames from this remote port
+ */
+void
+bfa_fcs_rport_uf_recv(struct bfa_fcs_rport_s *rport, struct fchs_s *fchs,
+ u16 len)
+{
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fc_els_cmd_s *els_cmd;
+
+ bfa_trc(rport->fcs, fchs->s_id);
+ bfa_trc(rport->fcs, fchs->d_id);
+ bfa_trc(rport->fcs, fchs->type);
+
+ if (fchs->type != FC_TYPE_ELS)
+ return;
+
+ els_cmd = (struct fc_els_cmd_s *) (fchs + 1);
+
+ bfa_trc(rport->fcs, els_cmd->els_code);
+
+ switch (els_cmd->els_code) {
+ case FC_ELS_LOGO:
+ bfa_fcs_rport_process_logo(rport, fchs);
+ break;
+
+ case FC_ELS_ADISC:
+ bfa_fcs_rport_process_adisc(rport, fchs, len);
+ break;
+
+ case FC_ELS_PRLO:
+ if (bfa_fcs_port_is_initiator(port))
+ bfa_fcs_fcpim_uf_recv(rport->itnim, fchs, len);
+
+ if (bfa_fcs_port_is_target(port))
+ bfa_fcs_fcptm_uf_recv(rport->tin, fchs, len);
+ break;
+
+ case FC_ELS_PRLI:
+ bfa_fcs_rport_process_prli(rport, fchs, len);
+ break;
+
+ case FC_ELS_RPSC:
+ bfa_fcs_rport_process_rpsc(rport, fchs, len);
+ break;
+
+ default:
+ bfa_fcs_rport_send_ls_rjt(rport, fchs,
+ FC_LS_RJT_RSN_CMD_NOT_SUPP,
+ FC_LS_RJT_EXP_NO_ADDL_INFO);
+ break;
+ }
+}
+
+/*
+ * Send a LS reject
+ */
+static void
+bfa_fcs_rport_send_ls_rjt(struct bfa_fcs_rport_s *rport, struct fchs_s *rx_fchs,
+ u8 reason_code, u8 reason_code_expl)
+{
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ int len;
+
+ bfa_trc(rport->fcs, rx_fchs->s_id);
+
+ fcxp = bfa_fcs_fcxp_alloc(rport->fcs);
+ if (!fcxp)
+ return;
+
+ len = fc_ls_rjt_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+ bfa_fcs_port_get_fcid(port), rx_fchs->ox_id,
+ reason_code, reason_code_expl);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, NULL, NULL, FC_MAX_PDUSZ, 0);
+}
+
+/**
+ * Module initialization
+ */
+void
+bfa_fcs_rport_modinit(struct bfa_fcs_s *fcs)
+{
+}
+
+/**
+ * Module cleanup
+ */
+void
+bfa_fcs_rport_modexit(struct bfa_fcs_s *fcs)
+{
+ bfa_fcs_modexit_comp(fcs);
+}
+
+/**
+ * Return state of rport.
+ */
+int
+bfa_fcs_rport_get_state(struct bfa_fcs_rport_s *rport)
+{
+ return bfa_sm_to_state(rport_sm_table, rport->sm);
+}
+
+/**
+ * Called by the Driver to set rport delete/ageout timeout
+ *
+ * param[in] rport timeout value in seconds.
+ *
+ * return None
+ */
+void
+bfa_fcs_rport_set_del_timeout(u8 rport_tmo)
+{
+ /*
+ * convert to Millisecs
+ */
+ if (rport_tmo > 0)
+ bfa_fcs_rport_del_timeout = rport_tmo * 1000;
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_vport.h"
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_trcmod.h"
+
+BFA_TRC_FILE(FCS, RPORT_API);
+
+/**
+ * rport_api.c Remote port implementation.
+ */
+
+/**
+ * fcs_rport_api FCS rport API.
+ */
+
+/**
+ * Direct API to add a target by port wwn. This interface is used, for
+ * example, by bios when target pwwn is known from boot lun configuration.
+ */
+bfa_status_t
+bfa_fcs_rport_add(struct bfa_fcs_port_s *port, wwn_t *pwwn,
+ struct bfa_fcs_rport_s *rport,
+ struct bfad_rport_s *rport_drv)
+{
+ bfa_trc(port->fcs, *pwwn);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Direct API to remove a target and its associated resources. This
+ * interface is used, for example, by vmware driver to remove target
+ * ports from the target list for a VM.
+ */
+bfa_status_t
+bfa_fcs_rport_remove(struct bfa_fcs_rport_s *rport_in)
+{
+
+ struct bfa_fcs_rport_s *rport;
+
+ bfa_trc(rport_in->fcs, rport_in->pwwn);
+
+ rport = bfa_fcs_port_get_rport_by_pwwn(rport_in->port, rport_in->pwwn);
+ if (rport == NULL) {
+ /*
+ * TBD Error handling
+ */
+ bfa_trc(rport_in->fcs, rport_in->pid);
+ return BFA_STATUS_UNKNOWN_RWWN;
+ }
+
+ /*
+ * TBD if this remote port is online, send a logo
+ */
+ return BFA_STATUS_OK;
+
+}
+
+/**
+ * Remote device status for display/debug.
+ */
+void
+bfa_fcs_rport_get_attr(struct bfa_fcs_rport_s *rport,
+ struct bfa_rport_attr_s *rport_attr)
+{
+ struct bfa_rport_qos_attr_s qos_attr;
+ struct bfa_fcs_port_s *port = rport->port;
+
+ bfa_os_memset(rport_attr, 0, sizeof(struct bfa_rport_attr_s));
+
+ rport_attr->pid = rport->pid;
+ rport_attr->pwwn = rport->pwwn;
+ rport_attr->nwwn = rport->nwwn;
+ rport_attr->cos_supported = rport->fc_cos;
+ rport_attr->df_sz = rport->maxfrsize;
+ rport_attr->state = bfa_fcs_rport_get_state(rport);
+ rport_attr->fc_cos = rport->fc_cos;
+ rport_attr->cisc = rport->cisc;
+ rport_attr->scsi_function = rport->scsi_function;
+ rport_attr->curr_speed = rport->rpf.rpsc_speed;
+ rport_attr->assigned_speed = rport->rpf.assigned_speed;
+
+ bfa_rport_get_qos_attr(rport->bfa_rport, &qos_attr);
+ rport_attr->qos_attr = qos_attr;
+
+ rport_attr->trl_enforced = BFA_FALSE;
+ if (bfa_pport_is_ratelim(port->fcs->bfa)) {
+ if ((rport->rpf.rpsc_speed == BFA_PPORT_SPEED_UNKNOWN) ||
+ (rport->rpf.rpsc_speed <
+ bfa_fcs_port_get_rport_max_speed(port)))
+ rport_attr->trl_enforced = BFA_TRUE;
+ }
+
+ /*
+ * TODO
+ * rport->symname
+ */
+}
+
+/**
+ * Per remote device statistics.
+ */
+void
+bfa_fcs_rport_get_stats(struct bfa_fcs_rport_s *rport,
+ struct bfa_rport_stats_s *stats)
+{
+ *stats = rport->stats;
+}
+
+void
+bfa_fcs_rport_clear_stats(struct bfa_fcs_rport_s *rport)
+{
+ bfa_os_memset((char *)&rport->stats, 0,
+ sizeof(struct bfa_rport_stats_s));
+}
+
+struct bfa_fcs_rport_s *
+bfa_fcs_rport_lookup(struct bfa_fcs_port_s *port, wwn_t rpwwn)
+{
+ struct bfa_fcs_rport_s *rport;
+
+ rport = bfa_fcs_port_get_rport_by_pwwn(port, rpwwn);
+ if (rport == NULL) {
+ /*
+ * TBD Error handling
+ */
+ }
+
+ return rport;
+}
+
+struct bfa_fcs_rport_s *
+bfa_fcs_rport_lookup_by_nwwn(struct bfa_fcs_port_s *port, wwn_t rnwwn)
+{
+ struct bfa_fcs_rport_s *rport;
+
+ rport = bfa_fcs_port_get_rport_by_nwwn(port, rnwwn);
+ if (rport == NULL) {
+ /*
+ * TBD Error handling
+ */
+ }
+
+ return rport;
+}
+
+/*
+ * This API is to set the Rport's speed. Should be used when RPSC is not
+ * supported by the rport.
+ */
+void
+bfa_fcs_rport_set_speed(struct bfa_fcs_rport_s *rport,
+ enum bfa_pport_speed speed)
+{
+ rport->rpf.assigned_speed = speed;
+
+ /* Set this speed in f/w only if the RPSC speed is not available */
+ if (rport->rpf.rpsc_speed == BFA_PPORT_SPEED_UNKNOWN)
+ bfa_rport_speed(rport->bfa_rport, speed);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * rport_ftrs.c Remote port features (RPF) implementation.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcbuild.h"
+#include "fcs_rport.h"
+#include "fcs_lport.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+
+BFA_TRC_FILE(FCS, RPORT_FTRS);
+
+#define BFA_FCS_RPF_RETRIES (3)
+#define BFA_FCS_RPF_RETRY_TIMEOUT (1000) /* 1 sec (In millisecs) */
+
+static void bfa_fcs_rpf_send_rpsc2(void *rport_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_rpf_rpsc2_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t req_status, u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_rpf_timeout(void *arg);
+
+/**
+ * fcs_rport_ftrs_sm FCS rport state machine events
+ */
+
+enum rpf_event {
+ RPFSM_EVENT_RPORT_OFFLINE = 1, /* Rport offline */
+ RPFSM_EVENT_RPORT_ONLINE = 2, /* Rport online */
+ RPFSM_EVENT_FCXP_SENT = 3, /* Frame from has been sent */
+ RPFSM_EVENT_TIMEOUT = 4, /* Rport SM timeout event */
+ RPFSM_EVENT_RPSC_COMP = 5,
+ RPFSM_EVENT_RPSC_FAIL = 6,
+ RPFSM_EVENT_RPSC_ERROR = 7,
+};
+
+static void bfa_fcs_rpf_sm_uninit(struct bfa_fcs_rpf_s *rpf,
+ enum rpf_event event);
+static void bfa_fcs_rpf_sm_rpsc_sending(struct bfa_fcs_rpf_s *rpf,
+ enum rpf_event event);
+static void bfa_fcs_rpf_sm_rpsc(struct bfa_fcs_rpf_s *rpf,
+ enum rpf_event event);
+static void bfa_fcs_rpf_sm_rpsc_retry(struct bfa_fcs_rpf_s *rpf,
+ enum rpf_event event);
+static void bfa_fcs_rpf_sm_offline(struct bfa_fcs_rpf_s *rpf,
+ enum rpf_event event);
+static void bfa_fcs_rpf_sm_online(struct bfa_fcs_rpf_s *rpf,
+ enum rpf_event event);
+
+static void
+bfa_fcs_rpf_sm_uninit(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPFSM_EVENT_RPORT_ONLINE :
+ if (!BFA_FCS_PID_IS_WKA(rport->pid)) {
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
+ rpf->rpsc_retries = 0;
+ bfa_fcs_rpf_send_rpsc2(rpf, NULL);
+ break;
+ };
+
+ case RPFSM_EVENT_RPORT_OFFLINE :
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_rpf_sm_rpsc_sending(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPFSM_EVENT_FCXP_SENT:
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc);
+ break;
+
+ case RPFSM_EVENT_RPORT_OFFLINE :
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
+ bfa_fcxp_walloc_cancel(rport->fcs->bfa, &rpf->fcxp_wqe);
+ rpf->rpsc_retries = 0;
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_rpf_sm_rpsc(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPFSM_EVENT_RPSC_COMP:
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_online);
+ /* Update speed info in f/w via BFA */
+ if (rpf->rpsc_speed != BFA_PPORT_SPEED_UNKNOWN) {
+ bfa_rport_speed(rport->bfa_rport, rpf->rpsc_speed);
+ } else if (rpf->assigned_speed != BFA_PPORT_SPEED_UNKNOWN) {
+ bfa_rport_speed(rport->bfa_rport, rpf->assigned_speed);
+ }
+ break;
+
+ case RPFSM_EVENT_RPSC_FAIL:
+ /* RPSC not supported by rport */
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_online);
+ break;
+
+ case RPFSM_EVENT_RPSC_ERROR:
+ /* need to retry...delayed a bit. */
+ if (rpf->rpsc_retries++ < BFA_FCS_RPF_RETRIES) {
+ bfa_timer_start(rport->fcs->bfa, &rpf->timer,
+ bfa_fcs_rpf_timeout, rpf,
+ BFA_FCS_RPF_RETRY_TIMEOUT);
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_retry);
+ } else {
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_online);
+ }
+ break;
+
+ case RPFSM_EVENT_RPORT_OFFLINE :
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
+ bfa_fcxp_discard(rpf->fcxp);
+ rpf->rpsc_retries = 0;
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_rpf_sm_rpsc_retry(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPFSM_EVENT_TIMEOUT :
+ /* re-send the RPSC */
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
+ bfa_fcs_rpf_send_rpsc2(rpf, NULL);
+ break;
+
+ case RPFSM_EVENT_RPORT_OFFLINE :
+ bfa_timer_stop(&rpf->timer);
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
+ rpf->rpsc_retries = 0;
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_rpf_sm_online(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPFSM_EVENT_RPORT_OFFLINE :
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_offline);
+ rpf->rpsc_retries = 0;
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_rpf_sm_offline(struct bfa_fcs_rpf_s *rpf, enum rpf_event event)
+{
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_trc(rport->fcs, event);
+
+ switch (event) {
+ case RPFSM_EVENT_RPORT_ONLINE :
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_rpsc_sending);
+ bfa_fcs_rpf_send_rpsc2(rpf, NULL);
+ break;
+
+ case RPFSM_EVENT_RPORT_OFFLINE :
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+/**
+ * Called when Rport is created.
+ */
+void bfa_fcs_rpf_init(struct bfa_fcs_rport_s *rport)
+{
+ struct bfa_fcs_rpf_s *rpf = &rport->rpf;
+
+ bfa_trc(rport->fcs, rport->pid);
+ rpf->rport = rport;
+
+ bfa_sm_set_state(rpf, bfa_fcs_rpf_sm_uninit);
+}
+
+/**
+ * Called when Rport becomes online
+ */
+void bfa_fcs_rpf_rport_online(struct bfa_fcs_rport_s *rport)
+{
+ bfa_trc(rport->fcs, rport->pid);
+
+ if (__fcs_min_cfg(rport->port->fcs))
+ return;
+
+ if (bfa_fcs_fabric_is_switched(rport->port->fabric))
+ bfa_sm_send_event(&rport->rpf, RPFSM_EVENT_RPORT_ONLINE);
+}
+
+/**
+ * Called when Rport becomes offline
+ */
+void bfa_fcs_rpf_rport_offline(struct bfa_fcs_rport_s *rport)
+{
+ bfa_trc(rport->fcs, rport->pid);
+
+ if (__fcs_min_cfg(rport->port->fcs))
+ return;
+
+ bfa_sm_send_event(&rport->rpf, RPFSM_EVENT_RPORT_OFFLINE);
+}
+
+static void
+bfa_fcs_rpf_timeout(void *arg)
+{
+ struct bfa_fcs_rpf_s *rpf = (struct bfa_fcs_rpf_s *) arg;
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+
+ bfa_trc(rport->fcs, rport->pid);
+ bfa_sm_send_event(rpf, RPFSM_EVENT_TIMEOUT);
+}
+
+static void
+bfa_fcs_rpf_send_rpsc2(void *rpf_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_rpf_s *rpf = (struct bfa_fcs_rpf_s *)rpf_cbarg;
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+ struct bfa_fcs_port_s *port = rport->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(rport->fcs, rport->pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &rpf->fcxp_wqe,
+ bfa_fcs_rpf_send_rpsc2, rpf);
+ return;
+ }
+ rpf->fcxp = fcxp;
+
+ len = fc_rpsc2_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rport->pid,
+ bfa_fcs_port_get_fcid(port), &rport->pid, 1);
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_rpf_rpsc2_response,
+ rpf, FC_MAX_PDUSZ, FC_RA_TOV);
+ rport->stats.rpsc_sent++;
+ bfa_sm_send_event(rpf, RPFSM_EVENT_FCXP_SENT);
+
+}
+
+static void
+bfa_fcs_rpf_rpsc2_response(void *fcsarg, struct bfa_fcxp_s *fcxp, void *cbarg,
+ bfa_status_t req_status, u32 rsp_len,
+ u32 resid_len, struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_rpf_s *rpf = (struct bfa_fcs_rpf_s *) cbarg;
+ struct bfa_fcs_rport_s *rport = rpf->rport;
+ struct fc_ls_rjt_s *ls_rjt;
+ struct fc_rpsc2_acc_s *rpsc2_acc;
+ u16 num_ents;
+
+ bfa_trc(rport->fcs, req_status);
+
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(rport->fcs, req_status);
+ if (req_status == BFA_STATUS_ETIMER)
+ rport->stats.rpsc_failed++;
+ bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_ERROR);
+ return;
+ }
+
+ rpsc2_acc = (struct fc_rpsc2_acc_s *) BFA_FCXP_RSP_PLD(fcxp);
+ if (rpsc2_acc->els_cmd == FC_ELS_ACC) {
+ rport->stats.rpsc_accs++;
+ num_ents = bfa_os_ntohs(rpsc2_acc->num_pids);
+ bfa_trc(rport->fcs, num_ents);
+ if (num_ents > 0) {
+ bfa_assert(rpsc2_acc->port_info[0].pid != rport->pid);
+ bfa_trc(rport->fcs,
+ bfa_os_ntohs(rpsc2_acc->port_info[0].pid));
+ bfa_trc(rport->fcs,
+ bfa_os_ntohs(rpsc2_acc->port_info[0].speed));
+ bfa_trc(rport->fcs,
+ bfa_os_ntohs(rpsc2_acc->port_info[0].index));
+ bfa_trc(rport->fcs,
+ rpsc2_acc->port_info[0].type);
+
+ if (rpsc2_acc->port_info[0].speed == 0) {
+ bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_ERROR);
+ return;
+ }
+
+ rpf->rpsc_speed = fc_rpsc_operspeed_to_bfa_speed(
+ bfa_os_ntohs(rpsc2_acc->port_info[0].speed));
+
+ bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_COMP);
+ }
+ } else {
+ ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+ bfa_trc(rport->fcs, ls_rjt->reason_code);
+ bfa_trc(rport->fcs, ls_rjt->reason_code_expl);
+ rport->stats.rpsc_rejects++;
+ if (ls_rjt->reason_code == FC_LS_RJT_RSN_CMD_NOT_SUPP) {
+ bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_FAIL);
+ } else {
+ bfa_sm_send_event(rpf, RPFSM_EVENT_RPSC_ERROR);
+ }
+ }
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include "fcs_lport.h"
+#include "fcs_rport.h"
+#include "fcs_ms.h"
+#include "fcs_trcmod.h"
+#include "fcs_fcxp.h"
+#include "fcs.h"
+#include "lport_priv.h"
+
+BFA_TRC_FILE(FCS, SCN);
+
+#define FC_QOS_RSCN_EVENT 0x0c
+#define FC_FABRIC_NAME_RSCN_EVENT 0x0d
+
+/*
+ * forward declarations
+ */
+static void bfa_fcs_port_scn_send_scr(void *scn_cbarg,
+ struct bfa_fcxp_s *fcxp_alloced);
+static void bfa_fcs_port_scn_scr_response(void *fcsarg,
+ struct bfa_fcxp_s *fcxp,
+ void *cbarg,
+ bfa_status_t req_status,
+ u32 rsp_len,
+ u32 resid_len,
+ struct fchs_s *rsp_fchs);
+static void bfa_fcs_port_scn_send_ls_acc(struct bfa_fcs_port_s *port,
+ struct fchs_s *rx_fchs);
+static void bfa_fcs_port_scn_timeout(void *arg);
+
+/**
+ * fcs_scm_sm FCS SCN state machine
+ */
+
+/**
+ * VPort SCN State Machine events
+ */
+enum port_scn_event {
+ SCNSM_EVENT_PORT_ONLINE = 1,
+ SCNSM_EVENT_PORT_OFFLINE = 2,
+ SCNSM_EVENT_RSP_OK = 3,
+ SCNSM_EVENT_RSP_ERROR = 4,
+ SCNSM_EVENT_TIMEOUT = 5,
+ SCNSM_EVENT_SCR_SENT = 6,
+};
+
+static void bfa_fcs_port_scn_sm_offline(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event);
+static void bfa_fcs_port_scn_sm_sending_scr(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event);
+static void bfa_fcs_port_scn_sm_scr(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event);
+static void bfa_fcs_port_scn_sm_scr_retry(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event);
+static void bfa_fcs_port_scn_sm_online(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event);
+
+/**
+ * Starting state - awaiting link up.
+ */
+static void
+bfa_fcs_port_scn_sm_offline(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event)
+{
+ switch (event) {
+ case SCNSM_EVENT_PORT_ONLINE:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_sending_scr);
+ bfa_fcs_port_scn_send_scr(scn, NULL);
+ break;
+
+ case SCNSM_EVENT_PORT_OFFLINE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_scn_sm_sending_scr(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event)
+{
+ switch (event) {
+ case SCNSM_EVENT_SCR_SENT:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_scr);
+ break;
+
+ case SCNSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+ bfa_fcxp_walloc_cancel(scn->port->fcs->bfa, &scn->fcxp_wqe);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_scn_sm_scr(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event)
+{
+ struct bfa_fcs_port_s *port = scn->port;
+
+ switch (event) {
+ case SCNSM_EVENT_RSP_OK:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_online);
+ break;
+
+ case SCNSM_EVENT_RSP_ERROR:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_scr_retry);
+ bfa_timer_start(port->fcs->bfa, &scn->timer,
+ bfa_fcs_port_scn_timeout, scn,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case SCNSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+ bfa_fcxp_discard(scn->fcxp);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_scn_sm_scr_retry(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event)
+{
+ switch (event) {
+ case SCNSM_EVENT_TIMEOUT:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_sending_scr);
+ bfa_fcs_port_scn_send_scr(scn, NULL);
+ break;
+
+ case SCNSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+ bfa_timer_stop(&scn->timer);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+static void
+bfa_fcs_port_scn_sm_online(struct bfa_fcs_port_scn_s *scn,
+ enum port_scn_event event)
+{
+ switch (event) {
+ case SCNSM_EVENT_PORT_OFFLINE:
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * fcs_scn_private FCS SCN private functions
+ */
+
+/**
+ * This routine will be called to send a SCR command.
+ */
+static void
+bfa_fcs_port_scn_send_scr(void *scn_cbarg, struct bfa_fcxp_s *fcxp_alloced)
+{
+ struct bfa_fcs_port_scn_s *scn = scn_cbarg;
+ struct bfa_fcs_port_s *port = scn->port;
+ struct fchs_s fchs;
+ int len;
+ struct bfa_fcxp_s *fcxp;
+
+ bfa_trc(port->fcs, port->pid);
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ fcxp = fcxp_alloced ? fcxp_alloced : bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp) {
+ bfa_fcxp_alloc_wait(port->fcs->bfa, &scn->fcxp_wqe,
+ bfa_fcs_port_scn_send_scr, scn);
+ return;
+ }
+ scn->fcxp = fcxp;
+
+ /*
+ * Handle VU registrations for Base port only
+ */
+ if ((!port->vport) && bfa_ioc_get_fcmode(&port->fcs->bfa->ioc)) {
+ len = fc_scr_build(&fchs, bfa_fcxp_get_reqbuf(fcxp),
+ bfa_lps_is_brcd_fabric(port->fabric->lps),
+ port->pid, 0);
+ } else {
+ len = fc_scr_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), BFA_FALSE,
+ port->pid, 0);
+ }
+
+ bfa_fcxp_send(fcxp, NULL, port->fabric->vf_id, port->lp_tag, BFA_FALSE,
+ FC_CLASS_3, len, &fchs, bfa_fcs_port_scn_scr_response,
+ (void *)scn, FC_MAX_PDUSZ, FC_RA_TOV);
+
+ bfa_sm_send_event(scn, SCNSM_EVENT_SCR_SENT);
+}
+
+static void
+bfa_fcs_port_scn_scr_response(void *fcsarg, struct bfa_fcxp_s *fcxp,
+ void *cbarg, bfa_status_t req_status,
+ u32 rsp_len, u32 resid_len,
+ struct fchs_s *rsp_fchs)
+{
+ struct bfa_fcs_port_scn_s *scn = (struct bfa_fcs_port_scn_s *)cbarg;
+ struct bfa_fcs_port_s *port = scn->port;
+ struct fc_els_cmd_s *els_cmd;
+ struct fc_ls_rjt_s *ls_rjt;
+
+ bfa_trc(port->fcs, port->port_cfg.pwwn);
+
+ /*
+ * Sanity Checks
+ */
+ if (req_status != BFA_STATUS_OK) {
+ bfa_trc(port->fcs, req_status);
+ bfa_sm_send_event(scn, SCNSM_EVENT_RSP_ERROR);
+ return;
+ }
+
+ els_cmd = (struct fc_els_cmd_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ switch (els_cmd->els_code) {
+
+ case FC_ELS_ACC:
+ bfa_sm_send_event(scn, SCNSM_EVENT_RSP_OK);
+ break;
+
+ case FC_ELS_LS_RJT:
+
+ ls_rjt = (struct fc_ls_rjt_s *) BFA_FCXP_RSP_PLD(fcxp);
+
+ bfa_trc(port->fcs, ls_rjt->reason_code);
+ bfa_trc(port->fcs, ls_rjt->reason_code_expl);
+
+ bfa_sm_send_event(scn, SCNSM_EVENT_RSP_ERROR);
+ break;
+
+ default:
+ bfa_sm_send_event(scn, SCNSM_EVENT_RSP_ERROR);
+ }
+}
+
+/*
+ * Send a LS Accept
+ */
+static void
+bfa_fcs_port_scn_send_ls_acc(struct bfa_fcs_port_s *port,
+ struct fchs_s *rx_fchs)
+{
+ struct fchs_s fchs;
+ struct bfa_fcxp_s *fcxp;
+ struct bfa_rport_s *bfa_rport = NULL;
+ int len;
+
+ bfa_trc(port->fcs, rx_fchs->s_id);
+
+ fcxp = bfa_fcs_fcxp_alloc(port->fcs);
+ if (!fcxp)
+ return;
+
+ len = fc_ls_acc_build(&fchs, bfa_fcxp_get_reqbuf(fcxp), rx_fchs->s_id,
+ bfa_fcs_port_get_fcid(port), rx_fchs->ox_id);
+
+ bfa_fcxp_send(fcxp, bfa_rport, port->fabric->vf_id, port->lp_tag,
+ BFA_FALSE, FC_CLASS_3, len, &fchs, NULL, NULL,
+ FC_MAX_PDUSZ, 0);
+}
+
+/**
+ * This routine will be called by bfa_timer on timer timeouts.
+ *
+ * param[in] vport - pointer to bfa_fcs_port_t.
+ * param[out] vport_status - pointer to return vport status in
+ *
+ * return
+ * void
+ *
+* Special Considerations:
+ *
+ * note
+ */
+static void
+bfa_fcs_port_scn_timeout(void *arg)
+{
+ struct bfa_fcs_port_scn_s *scn = (struct bfa_fcs_port_scn_s *)arg;
+
+ bfa_sm_send_event(scn, SCNSM_EVENT_TIMEOUT);
+}
+
+
+
+/**
+ * fcs_scn_public FCS state change notification public interfaces
+ */
+
+/*
+ * Functions called by port/fab
+ */
+void
+bfa_fcs_port_scn_init(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_scn_s *scn = BFA_FCS_GET_SCN_FROM_PORT(port);
+
+ scn->port = port;
+ bfa_sm_set_state(scn, bfa_fcs_port_scn_sm_offline);
+}
+
+void
+bfa_fcs_port_scn_offline(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_scn_s *scn = BFA_FCS_GET_SCN_FROM_PORT(port);
+
+ scn->port = port;
+ bfa_sm_send_event(scn, SCNSM_EVENT_PORT_OFFLINE);
+}
+
+void
+bfa_fcs_port_scn_online(struct bfa_fcs_port_s *port)
+{
+ struct bfa_fcs_port_scn_s *scn = BFA_FCS_GET_SCN_FROM_PORT(port);
+
+ scn->port = port;
+ bfa_sm_send_event(scn, SCNSM_EVENT_PORT_ONLINE);
+}
+
+static void
+bfa_fcs_port_scn_portid_rscn(struct bfa_fcs_port_s *port, u32 rpid)
+{
+ struct bfa_fcs_rport_s *rport;
+
+ bfa_trc(port->fcs, rpid);
+
+ /**
+ * If this is an unknown device, then it just came online.
+ * Otherwise let rport handle the RSCN event.
+ */
+ rport = bfa_fcs_port_get_rport_by_pid(port, rpid);
+ if (rport == NULL) {
+ /*
+ * If min cfg mode is enabled, we donot need to
+ * discover any new rports.
+ */
+ if (!__fcs_min_cfg(port->fcs))
+ rport = bfa_fcs_rport_create(port, rpid);
+ } else {
+ bfa_fcs_rport_scn(rport);
+ }
+}
+
+/**
+ * rscn format based PID comparison
+ */
+#define __fc_pid_match(__c0, __c1, __fmt) \
+ (((__fmt) == FC_RSCN_FORMAT_FABRIC) || \
+ (((__fmt) == FC_RSCN_FORMAT_DOMAIN) && \
+ ((__c0)[0] == (__c1)[0])) || \
+ (((__fmt) == FC_RSCN_FORMAT_AREA) && \
+ ((__c0)[0] == (__c1)[0]) && \
+ ((__c0)[1] == (__c1)[1])))
+
+static void
+bfa_fcs_port_scn_multiport_rscn(struct bfa_fcs_port_s *port,
+ enum fc_rscn_format format, u32 rscn_pid)
+{
+ struct bfa_fcs_rport_s *rport;
+ struct list_head *qe, *qe_next;
+ u8 *c0, *c1;
+
+ bfa_trc(port->fcs, format);
+ bfa_trc(port->fcs, rscn_pid);
+
+ c0 = (u8 *) &rscn_pid;
+
+ list_for_each_safe(qe, qe_next, &port->rport_q) {
+ rport = (struct bfa_fcs_rport_s *)qe;
+ c1 = (u8 *) &rport->pid;
+ if (__fc_pid_match(c0, c1, format))
+ bfa_fcs_rport_scn(rport);
+ }
+}
+
+void
+bfa_fcs_port_scn_process_rscn(struct bfa_fcs_port_s *port, struct fchs_s *fchs,
+ u32 len)
+{
+ struct fc_rscn_pl_s *rscn = (struct fc_rscn_pl_s *) (fchs + 1);
+ int num_entries;
+ u32 rscn_pid;
+ bfa_boolean_t nsquery = BFA_FALSE;
+ int i = 0;
+
+ num_entries =
+ (bfa_os_ntohs(rscn->payldlen) -
+ sizeof(u32)) / sizeof(rscn->event[0]);
+
+ bfa_trc(port->fcs, num_entries);
+
+ port->stats.num_rscn++;
+
+ bfa_fcs_port_scn_send_ls_acc(port, fchs);
+
+ for (i = 0; i < num_entries; i++) {
+ rscn_pid = rscn->event[i].portid;
+
+ bfa_trc(port->fcs, rscn->event[i].format);
+ bfa_trc(port->fcs, rscn_pid);
+
+ switch (rscn->event[i].format) {
+ case FC_RSCN_FORMAT_PORTID:
+ if (rscn->event[i].qualifier == FC_QOS_RSCN_EVENT) {
+ /*
+ * Ignore this event. f/w would have processed
+ * it
+ */
+ bfa_trc(port->fcs, rscn_pid);
+ } else {
+ port->stats.num_portid_rscn++;
+ bfa_fcs_port_scn_portid_rscn(port, rscn_pid);
+ }
+ break;
+
+ case FC_RSCN_FORMAT_FABRIC:
+ if (rscn->event[i].qualifier ==
+ FC_FABRIC_NAME_RSCN_EVENT) {
+ bfa_fcs_port_ms_fabric_rscn(port);
+ break;
+ }
+ /*
+ * !!!!!!!!! Fall Through !!!!!!!!!!!!!
+ */
+
+ case FC_RSCN_FORMAT_AREA:
+ case FC_RSCN_FORMAT_DOMAIN:
+ nsquery = BFA_TRUE;
+ bfa_fcs_port_scn_multiport_rscn(port,
+ rscn->event[i].format,
+ rscn_pid);
+ break;
+
+ default:
+ bfa_assert(0);
+ nsquery = BFA_TRUE;
+ }
+ }
+
+ /**
+ * If any of area, domain or fabric RSCN is received, do a fresh discovery
+ * to find new devices.
+ */
+ if (nsquery)
+ bfa_fcs_port_ns_query(port);
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * vfapi.c Fabric module implementation.
+ */
+
+#include "fcs_fabric.h"
+#include "fcs_trcmod.h"
+
+BFA_TRC_FILE(FCS, VFAPI);
+
+/**
+ * fcs_vf_api virtual fabrics API
+ */
+
+/**
+ * Enable VF mode.
+ *
+ * @param[in] fcs fcs module instance
+ * @param[in] vf_id default vf_id of port, FC_VF_ID_NULL
+ * to use standard default vf_id of 1.
+ *
+ * @retval BFA_STATUS_OK vf mode is enabled
+ * @retval BFA_STATUS_BUSY Port is active. Port must be disabled
+ * before VF mode can be enabled.
+ */
+bfa_status_t
+bfa_fcs_vf_mode_enable(struct bfa_fcs_s *fcs, u16 vf_id)
+{
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Disable VF mode.
+ *
+ * @param[in] fcs fcs module instance
+ *
+ * @retval BFA_STATUS_OK vf mode is disabled
+ * @retval BFA_STATUS_BUSY VFs are present and being used. All
+ * VFs must be deleted before disabling
+ * VF mode.
+ */
+bfa_status_t
+bfa_fcs_vf_mode_disable(struct bfa_fcs_s *fcs)
+{
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Create a new VF instance.
+ *
+ * A new VF is created using the given VF configuration. A VF is identified
+ * by VF id. No duplicate VF creation is allowed with the same VF id. Once
+ * a VF is created, VF is automatically started after link initialization
+ * and EVFP exchange is completed.
+ *
+ * param[in] vf - FCS vf data structure. Memory is
+ * allocated by caller (driver)
+ * param[in] fcs - FCS module
+ * param[in] vf_cfg - VF configuration
+ * param[in] vf_drv - Opaque handle back to the driver's
+ * virtual vf structure
+ *
+ * retval BFA_STATUS_OK VF creation is successful
+ * retval BFA_STATUS_FAILED VF creation failed
+ * retval BFA_STATUS_EEXIST A VF exists with the given vf_id
+ */
+bfa_status_t
+bfa_fcs_vf_create(bfa_fcs_vf_t *vf, struct bfa_fcs_s *fcs, u16 vf_id,
+ struct bfa_port_cfg_s *port_cfg, struct bfad_vf_s *vf_drv)
+{
+ bfa_trc(fcs, vf_id);
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Use this function to delete a BFA VF object. VF object should
+ * be stopped before this function call.
+ *
+ * param[in] vf - pointer to bfa_vf_t.
+ *
+ * retval BFA_STATUS_OK On vf deletion success
+ * retval BFA_STATUS_BUSY VF is not in a stopped state
+ * retval BFA_STATUS_INPROGRESS VF deletion in in progress
+ */
+bfa_status_t
+bfa_fcs_vf_delete(bfa_fcs_vf_t *vf)
+{
+ bfa_trc(vf->fcs, vf->vf_id);
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Start participation in VF. This triggers login to the virtual fabric.
+ *
+ * param[in] vf - pointer to bfa_vf_t.
+ *
+ * return None
+ */
+void
+bfa_fcs_vf_start(bfa_fcs_vf_t *vf)
+{
+ bfa_trc(vf->fcs, vf->vf_id);
+}
+
+/**
+ * Logout with the virtual fabric.
+ *
+ * param[in] vf - pointer to bfa_vf_t.
+ *
+ * retval BFA_STATUS_OK On success.
+ * retval BFA_STATUS_INPROGRESS VF is being stopped.
+ */
+bfa_status_t
+bfa_fcs_vf_stop(bfa_fcs_vf_t *vf)
+{
+ bfa_trc(vf->fcs, vf->vf_id);
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Returns attributes of the given VF.
+ *
+ * param[in] vf pointer to bfa_vf_t.
+ * param[out] vf_attr vf attributes returned
+ *
+ * return None
+ */
+void
+bfa_fcs_vf_get_attr(bfa_fcs_vf_t *vf, struct bfa_vf_attr_s *vf_attr)
+{
+ bfa_trc(vf->fcs, vf->vf_id);
+}
+
+/**
+ * Return statistics associated with the given vf.
+ *
+ * param[in] vf pointer to bfa_vf_t.
+ * param[out] vf_stats vf statistics returned
+ *
+ * @return None
+ */
+void
+bfa_fcs_vf_get_stats(bfa_fcs_vf_t *vf, struct bfa_vf_stats_s *vf_stats)
+{
+ bfa_os_memcpy(vf_stats, &vf->stats, sizeof(struct bfa_vf_stats_s));
+ return;
+}
+
+void
+/**
+ * clear statistics associated with the given vf.
+ *
+ * param[in] vf pointer to bfa_vf_t.
+ *
+ * @return None
+ */
+bfa_fcs_vf_clear_stats(bfa_fcs_vf_t *vf)
+{
+ bfa_os_memset(&vf->stats, 0, sizeof(struct bfa_vf_stats_s));
+ return;
+}
+
+/**
+ * Returns FCS vf structure for a given vf_id.
+ *
+ * param[in] vf_id - VF_ID
+ *
+ * return
+ * If lookup succeeds, retuns fcs vf object, otherwise returns NULL
+ */
+bfa_fcs_vf_t *
+bfa_fcs_vf_lookup(struct bfa_fcs_s *fcs, u16 vf_id)
+{
+ bfa_trc(fcs, vf_id);
+ if (vf_id == FC_VF_ID_NULL)
+ return (&fcs->fabric);
+
+ /**
+ * @todo vf support
+ */
+
+ return NULL;
+}
+
+/**
+ * Returns driver VF structure for a given FCS vf.
+ *
+ * param[in] vf - pointer to bfa_vf_t
+ *
+ * return Driver VF structure
+ */
+struct bfad_vf_s *
+bfa_fcs_vf_get_drv_vf(bfa_fcs_vf_t *vf)
+{
+ bfa_assert(vf);
+ bfa_trc(vf->fcs, vf->vf_id);
+ return vf->vf_drv;
+}
+
+/**
+ * Return the list of VFs configured.
+ *
+ * param[in] fcs fcs module instance
+ * param[out] vf_ids returned list of vf_ids
+ * param[in,out] nvfs in:size of vf_ids array,
+ * out:total elements present,
+ * actual elements returned is limited by the size
+ *
+ * return Driver VF structure
+ */
+void
+bfa_fcs_vf_list(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs)
+{
+ bfa_trc(fcs, *nvfs);
+}
+
+/**
+ * Return the list of all VFs visible from fabric.
+ *
+ * param[in] fcs fcs module instance
+ * param[out] vf_ids returned list of vf_ids
+ * param[in,out] nvfs in:size of vf_ids array,
+ * out:total elements present,
+ * actual elements returned is limited by the size
+ *
+ * return Driver VF structure
+ */
+void
+bfa_fcs_vf_list_all(struct bfa_fcs_s *fcs, u16 *vf_ids, int *nvfs)
+{
+ bfa_trc(fcs, *nvfs);
+}
+
+/**
+ * Return the list of local logical ports present in the given VF.
+ *
+ * param[in] vf vf for which logical ports are returned
+ * param[out] lpwwn returned logical port wwn list
+ * param[in,out] nlports in:size of lpwwn list;
+ * out:total elements present,
+ * actual elements returned is limited by the size
+ *
+ */
+void
+bfa_fcs_vf_get_ports(bfa_fcs_vf_t *vf, wwn_t lpwwn[], int *nlports)
+{
+ struct list_head *qe;
+ struct bfa_fcs_vport_s *vport;
+ int i;
+ struct bfa_fcs_s *fcs;
+
+ if (vf == NULL || lpwwn == NULL || *nlports == 0)
+ return;
+
+ fcs = vf->fcs;
+
+ bfa_trc(fcs, vf->vf_id);
+ bfa_trc(fcs, (u32) *nlports);
+
+ i = 0;
+ lpwwn[i++] = vf->bport.port_cfg.pwwn;
+
+ list_for_each(qe, &vf->vport_q) {
+ if (i >= *nlports)
+ break;
+
+ vport = (struct bfa_fcs_vport_s *) qe;
+ lpwwn[i++] = vport->lport.port_cfg.pwwn;
+ }
+
+ bfa_trc(fcs, i);
+ *nlports = i;
+ return;
+}
+
+
--- /dev/null
+/*
+ * Copyright (c) 2005-2009 Brocade Communications Systems, Inc.
+ * All rights reserved
+ * www.brocade.com
+ *
+ * Linux driver for Brocade Fibre Channel Host Bus Adapter.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License (GPL) Version 2 as
+ * published by the Free Software Foundation
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/**
+ * bfa_fcs_vport.c FCS virtual port state machine
+ */
+
+#include <bfa.h>
+#include <bfa_svc.h>
+#include <fcbuild.h>
+#include "fcs_fabric.h"
+#include "fcs_lport.h"
+#include "fcs_vport.h"
+#include "fcs_trcmod.h"
+#include "fcs.h"
+#include <aen/bfa_aen_lport.h>
+
+BFA_TRC_FILE(FCS, VPORT);
+
+#define __vport_fcs(__vp) (__vp)->lport.fcs
+#define __vport_pwwn(__vp) (__vp)->lport.port_cfg.pwwn
+#define __vport_nwwn(__vp) (__vp)->lport.port_cfg.nwwn
+#define __vport_bfa(__vp) (__vp)->lport.fcs->bfa
+#define __vport_fcid(__vp) (__vp)->lport.pid
+#define __vport_fabric(__vp) (__vp)->lport.fabric
+#define __vport_vfid(__vp) (__vp)->lport.fabric->vf_id
+
+#define BFA_FCS_VPORT_MAX_RETRIES 5
+/*
+ * Forward declarations
+ */
+static void bfa_fcs_vport_do_fdisc(struct bfa_fcs_vport_s *vport);
+static void bfa_fcs_vport_timeout(void *vport_arg);
+static void bfa_fcs_vport_do_logo(struct bfa_fcs_vport_s *vport);
+static void bfa_fcs_vport_free(struct bfa_fcs_vport_s *vport);
+
+/**
+ * fcs_vport_sm FCS virtual port state machine
+ */
+
+/**
+ * VPort State Machine events
+ */
+enum bfa_fcs_vport_event {
+ BFA_FCS_VPORT_SM_CREATE = 1, /* vport create event */
+ BFA_FCS_VPORT_SM_DELETE = 2, /* vport delete event */
+ BFA_FCS_VPORT_SM_START = 3, /* vport start request */
+ BFA_FCS_VPORT_SM_STOP = 4, /* stop: unsupported */
+ BFA_FCS_VPORT_SM_ONLINE = 5, /* fabric online */
+ BFA_FCS_VPORT_SM_OFFLINE = 6, /* fabric offline event */
+ BFA_FCS_VPORT_SM_FRMSENT = 7, /* fdisc/logo sent events */
+ BFA_FCS_VPORT_SM_RSP_OK = 8, /* good response */
+ BFA_FCS_VPORT_SM_RSP_ERROR = 9, /* error/bad response */
+ BFA_FCS_VPORT_SM_TIMEOUT = 10, /* delay timer event */
+ BFA_FCS_VPORT_SM_DELCOMP = 11, /* lport delete completion */
+ BFA_FCS_VPORT_SM_RSP_DUP_WWN = 12, /* Dup wnn error */
+ BFA_FCS_VPORT_SM_RSP_FAILED = 13, /* non-retryable failure */
+};
+
+static void bfa_fcs_vport_sm_uninit(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_created(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_offline(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_fdisc(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_fdisc_retry(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_online(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_deleting(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_cleanup(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_logo(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+static void bfa_fcs_vport_sm_error(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event);
+
+static struct bfa_sm_table_s vport_sm_table[] = {
+ {BFA_SM(bfa_fcs_vport_sm_uninit), BFA_FCS_VPORT_UNINIT},
+ {BFA_SM(bfa_fcs_vport_sm_created), BFA_FCS_VPORT_CREATED},
+ {BFA_SM(bfa_fcs_vport_sm_offline), BFA_FCS_VPORT_OFFLINE},
+ {BFA_SM(bfa_fcs_vport_sm_fdisc), BFA_FCS_VPORT_FDISC},
+ {BFA_SM(bfa_fcs_vport_sm_fdisc_retry), BFA_FCS_VPORT_FDISC_RETRY},
+ {BFA_SM(bfa_fcs_vport_sm_online), BFA_FCS_VPORT_ONLINE},
+ {BFA_SM(bfa_fcs_vport_sm_deleting), BFA_FCS_VPORT_DELETING},
+ {BFA_SM(bfa_fcs_vport_sm_cleanup), BFA_FCS_VPORT_CLEANUP},
+ {BFA_SM(bfa_fcs_vport_sm_logo), BFA_FCS_VPORT_LOGO},
+ {BFA_SM(bfa_fcs_vport_sm_error), BFA_FCS_VPORT_ERROR}
+};
+
+/**
+ * Beginning state.
+ */
+static void
+bfa_fcs_vport_sm_uninit(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_CREATE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_created);
+ bfa_fcs_fabric_addvport(__vport_fabric(vport), vport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Created state - a start event is required to start up the state machine.
+ */
+static void
+bfa_fcs_vport_sm_created(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_START:
+ if (bfa_fcs_fabric_is_online(__vport_fabric(vport))
+ && bfa_fcs_fabric_npiv_capable(__vport_fabric(vport))) {
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc);
+ bfa_fcs_vport_do_fdisc(vport);
+ } else {
+ /**
+ * Fabric is offline or not NPIV capable, stay in
+ * offline state.
+ */
+ vport->vport_stats.fab_no_npiv++;
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+ }
+ break;
+
+ case BFA_FCS_VPORT_SM_DELETE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
+ bfa_fcs_port_delete(&vport->lport);
+ break;
+
+ case BFA_FCS_VPORT_SM_ONLINE:
+ case BFA_FCS_VPORT_SM_OFFLINE:
+ /**
+ * Ignore ONLINE/OFFLINE events from fabric till vport is started.
+ */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Offline state - awaiting ONLINE event from fabric SM.
+ */
+static void
+bfa_fcs_vport_sm_offline(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_DELETE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
+ bfa_fcs_port_delete(&vport->lport);
+ break;
+
+ case BFA_FCS_VPORT_SM_ONLINE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc);
+ vport->fdisc_retries = 0;
+ bfa_fcs_vport_do_fdisc(vport);
+ break;
+
+ case BFA_FCS_VPORT_SM_OFFLINE:
+ /*
+ * This can happen if the vport couldn't be initialzied due
+ * the fact that the npiv was not enabled on the switch. In
+ * that case we will put the vport in offline state. However,
+ * the link can go down and cause the this event to be sent when
+ * we are already offline. Ignore it.
+ */
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * FDISC is sent and awaiting reply from fabric.
+ */
+static void
+bfa_fcs_vport_sm_fdisc(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_DELETE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_logo);
+ bfa_lps_discard(vport->lps);
+ bfa_fcs_vport_do_logo(vport);
+ break;
+
+ case BFA_FCS_VPORT_SM_OFFLINE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+ bfa_lps_discard(vport->lps);
+ break;
+
+ case BFA_FCS_VPORT_SM_RSP_OK:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_online);
+ bfa_fcs_port_online(&vport->lport);
+ break;
+
+ case BFA_FCS_VPORT_SM_RSP_ERROR:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc_retry);
+ bfa_timer_start(__vport_bfa(vport), &vport->timer,
+ bfa_fcs_vport_timeout, vport,
+ BFA_FCS_RETRY_TIMEOUT);
+ break;
+
+ case BFA_FCS_VPORT_SM_RSP_FAILED:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+ break;
+
+ case BFA_FCS_VPORT_SM_RSP_DUP_WWN:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_error);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * FDISC attempt failed - a timer is active to retry FDISC.
+ */
+static void
+bfa_fcs_vport_sm_fdisc_retry(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_DELETE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
+ bfa_timer_stop(&vport->timer);
+ bfa_fcs_port_delete(&vport->lport);
+ break;
+
+ case BFA_FCS_VPORT_SM_OFFLINE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+ bfa_timer_stop(&vport->timer);
+ break;
+
+ case BFA_FCS_VPORT_SM_TIMEOUT:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_fdisc);
+ vport->vport_stats.fdisc_retries++;
+ vport->fdisc_retries++;
+ bfa_fcs_vport_do_fdisc(vport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Vport is online (FDISC is complete).
+ */
+static void
+bfa_fcs_vport_sm_online(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_DELETE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_deleting);
+ bfa_fcs_port_delete(&vport->lport);
+ break;
+
+ case BFA_FCS_VPORT_SM_OFFLINE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_offline);
+ bfa_lps_discard(vport->lps);
+ bfa_fcs_port_offline(&vport->lport);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Vport is being deleted - awaiting lport delete completion to send
+ * LOGO to fabric.
+ */
+static void
+bfa_fcs_vport_sm_deleting(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_DELETE:
+ break;
+
+ case BFA_FCS_VPORT_SM_DELCOMP:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_logo);
+ bfa_fcs_vport_do_logo(vport);
+ break;
+
+ case BFA_FCS_VPORT_SM_OFFLINE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_cleanup);
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * Error State.
+ * This state will be set when the Vport Creation fails due to errors like
+ * Dup WWN. In this state only operation allowed is a Vport Delete.
+ */
+static void
+bfa_fcs_vport_sm_error(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_DELETE:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
+ bfa_fcs_vport_free(vport);
+ break;
+
+ default:
+ bfa_trc(__vport_fcs(vport), event);
+ }
+}
+
+/**
+ * Lport cleanup is in progress since vport is being deleted. Fabric is
+ * offline, so no LOGO is needed to complete vport deletion.
+ */
+static void
+bfa_fcs_vport_sm_cleanup(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_DELCOMP:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
+ bfa_fcs_vport_free(vport);
+ break;
+
+ case BFA_FCS_VPORT_SM_DELETE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+/**
+ * LOGO is sent to fabric. Vport delete is in progress. Lport delete cleanup
+ * is done.
+ */
+static void
+bfa_fcs_vport_sm_logo(struct bfa_fcs_vport_s *vport,
+ enum bfa_fcs_vport_event event)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), event);
+
+ switch (event) {
+ case BFA_FCS_VPORT_SM_OFFLINE:
+ bfa_lps_discard(vport->lps);
+ /*
+ * !!! fall through !!!
+ */
+
+ case BFA_FCS_VPORT_SM_RSP_OK:
+ case BFA_FCS_VPORT_SM_RSP_ERROR:
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
+ bfa_fcs_vport_free(vport);
+ break;
+
+ case BFA_FCS_VPORT_SM_DELETE:
+ break;
+
+ default:
+ bfa_assert(0);
+ }
+}
+
+
+
+/**
+ * fcs_vport_private FCS virtual port private functions
+ */
+
+/**
+ * Send AEN notification
+ */
+static void
+bfa_fcs_vport_aen_post(bfa_fcs_lport_t *port, enum bfa_lport_aen_event event)
+{
+ union bfa_aen_data_u aen_data;
+ struct bfa_log_mod_s *logmod = port->fcs->logm;
+ enum bfa_port_role role = port->port_cfg.roles;
+ wwn_t lpwwn = bfa_fcs_port_get_pwwn(port);
+ char lpwwn_ptr[BFA_STRING_32];
+ char *role_str[BFA_PORT_ROLE_FCP_MAX / 2 + 1] =
+ { "Initiator", "Target", "IPFC" };
+
+ wwn2str(lpwwn_ptr, lpwwn);
+
+ bfa_assert(role <= BFA_PORT_ROLE_FCP_MAX);
+
+ switch (event) {
+ case BFA_LPORT_AEN_NPIV_DUP_WWN:
+ bfa_log(logmod, BFA_AEN_LPORT_NPIV_DUP_WWN, lpwwn_ptr,
+ role_str[role / 2]);
+ break;
+ case BFA_LPORT_AEN_NPIV_FABRIC_MAX:
+ bfa_log(logmod, BFA_AEN_LPORT_NPIV_FABRIC_MAX, lpwwn_ptr,
+ role_str[role / 2]);
+ break;
+ case BFA_LPORT_AEN_NPIV_UNKNOWN:
+ bfa_log(logmod, BFA_AEN_LPORT_NPIV_UNKNOWN, lpwwn_ptr,
+ role_str[role / 2]);
+ break;
+ default:
+ break;
+ }
+
+ aen_data.lport.vf_id = port->fabric->vf_id;
+ aen_data.lport.roles = role;
+ aen_data.lport.ppwwn =
+ bfa_fcs_port_get_pwwn(bfa_fcs_get_base_port(port->fcs));
+ aen_data.lport.lpwwn = lpwwn;
+}
+
+/**
+ * This routine will be called to send a FDISC command.
+ */
+static void
+bfa_fcs_vport_do_fdisc(struct bfa_fcs_vport_s *vport)
+{
+ bfa_lps_fdisc(vport->lps, vport,
+ bfa_pport_get_maxfrsize(__vport_bfa(vport)),
+ __vport_pwwn(vport), __vport_nwwn(vport));
+ vport->vport_stats.fdisc_sent++;
+}
+
+static void
+bfa_fcs_vport_fdisc_rejected(struct bfa_fcs_vport_s *vport)
+{
+ u8 lsrjt_rsn = bfa_lps_get_lsrjt_rsn(vport->lps);
+ u8 lsrjt_expl = bfa_lps_get_lsrjt_expl(vport->lps);
+
+ bfa_trc(__vport_fcs(vport), lsrjt_rsn);
+ bfa_trc(__vport_fcs(vport), lsrjt_expl);
+
+ /*
+ * For certain reason codes, we don't want to retry.
+ */
+ switch (bfa_lps_get_lsrjt_expl(vport->lps)) {
+ case FC_LS_RJT_EXP_INV_PORT_NAME: /* by brocade */
+ case FC_LS_RJT_EXP_INVALID_NPORT_ID: /* by Cisco */
+ if (vport->fdisc_retries < BFA_FCS_VPORT_MAX_RETRIES)
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+ else {
+ bfa_fcs_vport_aen_post(&vport->lport,
+ BFA_LPORT_AEN_NPIV_DUP_WWN);
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_DUP_WWN);
+ }
+ break;
+
+ case FC_LS_RJT_EXP_INSUFF_RES:
+ /*
+ * This means max logins per port/switch setting on the
+ * switch was exceeded.
+ */
+ if (vport->fdisc_retries < BFA_FCS_VPORT_MAX_RETRIES)
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+ else {
+ bfa_fcs_vport_aen_post(&vport->lport,
+ BFA_LPORT_AEN_NPIV_FABRIC_MAX);
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_FAILED);
+ }
+ break;
+
+ default:
+ if (vport->fdisc_retries == 0) /* Print only once */
+ bfa_fcs_vport_aen_post(&vport->lport,
+ BFA_LPORT_AEN_NPIV_UNKNOWN);
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+ }
+}
+
+/**
+ * Called to send a logout to the fabric. Used when a V-Port is
+ * deleted/stopped.
+ */
+static void
+bfa_fcs_vport_do_logo(struct bfa_fcs_vport_s *vport)
+{
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+
+ vport->vport_stats.logo_sent++;
+ bfa_lps_fdisclogo(vport->lps);
+}
+
+/**
+ * This routine will be called by bfa_timer on timer timeouts.
+ *
+ * param[in] vport - pointer to bfa_fcs_vport_t.
+ * param[out] vport_status - pointer to return vport status in
+ *
+ * return
+ * void
+ *
+* Special Considerations:
+ *
+ * note
+ */
+static void
+bfa_fcs_vport_timeout(void *vport_arg)
+{
+ struct bfa_fcs_vport_s *vport = (struct bfa_fcs_vport_s *)vport_arg;
+
+ vport->vport_stats.fdisc_timeouts++;
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_TIMEOUT);
+}
+
+static void
+bfa_fcs_vport_free(struct bfa_fcs_vport_s *vport)
+{
+ bfa_fcs_fabric_delvport(__vport_fabric(vport), vport);
+ bfa_fcb_vport_delete(vport->vport_drv);
+ bfa_lps_delete(vport->lps);
+}
+
+
+
+/**
+ * fcs_vport_public FCS virtual port public interfaces
+ */
+
+/**
+ * Online notification from fabric SM.
+ */
+void
+bfa_fcs_vport_online(struct bfa_fcs_vport_s *vport)
+{
+ vport->vport_stats.fab_online++;
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_ONLINE);
+}
+
+/**
+ * Offline notification from fabric SM.
+ */
+void
+bfa_fcs_vport_offline(struct bfa_fcs_vport_s *vport)
+{
+ vport->vport_stats.fab_offline++;
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_OFFLINE);
+}
+
+/**
+ * Cleanup notification from fabric SM on link timer expiry.
+ */
+void
+bfa_fcs_vport_cleanup(struct bfa_fcs_vport_s *vport)
+{
+ vport->vport_stats.fab_cleanup++;
+}
+
+/**
+ * Delete completion callback from associated lport
+ */
+void
+bfa_fcs_vport_delete_comp(struct bfa_fcs_vport_s *vport)
+{
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_DELCOMP);
+}
+
+/**
+ * Module initialization
+ */
+void
+bfa_fcs_vport_modinit(struct bfa_fcs_s *fcs)
+{
+}
+
+/**
+ * Module cleanup
+ */
+void
+bfa_fcs_vport_modexit(struct bfa_fcs_s *fcs)
+{
+ bfa_fcs_modexit_comp(fcs);
+}
+
+u32
+bfa_fcs_vport_get_max(struct bfa_fcs_s *fcs)
+{
+ struct bfa_ioc_attr_s ioc_attr;
+
+ bfa_get_attr(fcs->bfa, &ioc_attr);
+
+ if (ioc_attr.pci_attr.device_id == BFA_PCI_DEVICE_ID_CT)
+ return (BFA_FCS_MAX_VPORTS_SUPP_CT);
+ else
+ return (BFA_FCS_MAX_VPORTS_SUPP_CB);
+}
+
+
+
+/**
+ * fcs_vport_api Virtual port API
+ */
+
+/**
+ * Use this function to instantiate a new FCS vport object. This
+ * function will not trigger any HW initialization process (which will be
+ * done in vport_start() call)
+ *
+ * param[in] vport - pointer to bfa_fcs_vport_t. This space
+ * needs to be allocated by the driver.
+ * param[in] fcs - FCS instance
+ * param[in] vport_cfg - vport configuration
+ * param[in] vf_id - VF_ID if vport is created within a VF.
+ * FC_VF_ID_NULL to specify base fabric.
+ * param[in] vport_drv - Opaque handle back to the driver's vport
+ * structure
+ *
+ * retval BFA_STATUS_OK - on success.
+ * retval BFA_STATUS_FAILED - on failure.
+ */
+bfa_status_t
+bfa_fcs_vport_create(struct bfa_fcs_vport_s *vport, struct bfa_fcs_s *fcs,
+ u16 vf_id, struct bfa_port_cfg_s *vport_cfg,
+ struct bfad_vport_s *vport_drv)
+{
+ if (vport_cfg->pwwn == 0)
+ return (BFA_STATUS_INVALID_WWN);
+
+ if (bfa_fcs_port_get_pwwn(&fcs->fabric.bport) == vport_cfg->pwwn)
+ return BFA_STATUS_VPORT_WWN_BP;
+
+ if (bfa_fcs_vport_lookup(fcs, vf_id, vport_cfg->pwwn) != NULL)
+ return BFA_STATUS_VPORT_EXISTS;
+
+ if (bfa_fcs_fabric_vport_count(&fcs->fabric) ==
+ bfa_fcs_vport_get_max(fcs))
+ return BFA_STATUS_VPORT_MAX;
+
+ vport->lps = bfa_lps_alloc(fcs->bfa);
+ if (!vport->lps)
+ return BFA_STATUS_VPORT_MAX;
+
+ vport->vport_drv = vport_drv;
+ bfa_sm_set_state(vport, bfa_fcs_vport_sm_uninit);
+
+ bfa_fcs_lport_init(&vport->lport, fcs, vf_id, vport_cfg, vport);
+
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_CREATE);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Use this function initialize the vport.
+ *
+ * @param[in] vport - pointer to bfa_fcs_vport_t.
+ *
+ * @returns None
+ */
+bfa_status_t
+bfa_fcs_vport_start(struct bfa_fcs_vport_s *vport)
+{
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_START);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Use this function quiese the vport object. This function will return
+ * immediately, when the vport is actually stopped, the
+ * bfa_drv_vport_stop_cb() will be called.
+ *
+ * param[in] vport - pointer to bfa_fcs_vport_t.
+ *
+ * return None
+ */
+bfa_status_t
+bfa_fcs_vport_stop(struct bfa_fcs_vport_s *vport)
+{
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_STOP);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Use this function to delete a vport object. Fabric object should
+ * be stopped before this function call.
+ *
+ * param[in] vport - pointer to bfa_fcs_vport_t.
+ *
+ * return None
+ */
+bfa_status_t
+bfa_fcs_vport_delete(struct bfa_fcs_vport_s *vport)
+{
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_DELETE);
+
+ return BFA_STATUS_OK;
+}
+
+/**
+ * Use this function to get vport's current status info.
+ *
+ * param[in] vport pointer to bfa_fcs_vport_t.
+ * param[out] attr pointer to return vport attributes
+ *
+ * return None
+ */
+void
+bfa_fcs_vport_get_attr(struct bfa_fcs_vport_s *vport,
+ struct bfa_vport_attr_s *attr)
+{
+ if (vport == NULL || attr == NULL)
+ return;
+
+ bfa_os_memset(attr, 0, sizeof(struct bfa_vport_attr_s));
+
+ bfa_fcs_port_get_attr(&vport->lport, &attr->port_attr);
+ attr->vport_state = bfa_sm_to_state(vport_sm_table, vport->sm);
+}
+
+/**
+ * Use this function to get vport's statistics.
+ *
+ * param[in] vport pointer to bfa_fcs_vport_t.
+ * param[out] stats pointer to return vport statistics in
+ *
+ * return None
+ */
+void
+bfa_fcs_vport_get_stats(struct bfa_fcs_vport_s *vport,
+ struct bfa_vport_stats_s *stats)
+{
+ *stats = vport->vport_stats;
+}
+
+/**
+ * Use this function to clear vport's statistics.
+ *
+ * param[in] vport pointer to bfa_fcs_vport_t.
+ *
+ * return None
+ */
+void
+bfa_fcs_vport_clr_stats(struct bfa_fcs_vport_s *vport)
+{
+ bfa_os_memset(&vport->vport_stats, 0, sizeof(struct bfa_vport_stats_s));
+}
+
+/**
+ * Lookup a virtual port. Excludes base port from lookup.
+ */
+struct bfa_fcs_vport_s *
+bfa_fcs_vport_lookup(struct bfa_fcs_s *fcs, u16 vf_id, wwn_t vpwwn)
+{
+ struct bfa_fcs_vport_s *vport;
+ struct bfa_fcs_fabric_s *fabric;
+
+ bfa_trc(fcs, vf_id);
+ bfa_trc(fcs, vpwwn);
+
+ fabric = bfa_fcs_vf_lookup(fcs, vf_id);
+ if (!fabric) {
+ bfa_trc(fcs, vf_id);
+ return NULL;
+ }
+
+ vport = bfa_fcs_fabric_vport_lookup(fabric, vpwwn);
+ return vport;
+}
+
+/**
+ * FDISC Response
+ */
+void
+bfa_cb_lps_fdisc_comp(void *bfad, void *uarg, bfa_status_t status)
+{
+ struct bfa_fcs_vport_s *vport = uarg;
+
+ bfa_trc(__vport_fcs(vport), __vport_pwwn(vport));
+ bfa_trc(__vport_fcs(vport), status);
+
+ switch (status) {
+ case BFA_STATUS_OK:
+ /*
+ * Initialiaze the V-Port fields
+ */
+ __vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
+ vport->vport_stats.fdisc_accepts++;
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_OK);
+ break;
+
+ case BFA_STATUS_INVALID_MAC:
+ /*
+ * Only for CNA
+ */
+ vport->vport_stats.fdisc_acc_bad++;
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+
+ break;
+
+ case BFA_STATUS_EPROTOCOL:
+ switch (bfa_lps_get_extstatus(vport->lps)) {
+ case BFA_EPROTO_BAD_ACCEPT:
+ vport->vport_stats.fdisc_acc_bad++;
+ break;
+
+ case BFA_EPROTO_UNKNOWN_RSP:
+ vport->vport_stats.fdisc_unknown_rsp++;
+ break;
+
+ default:
+ break;
+ }
+
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+ break;
+
+ case BFA_STATUS_FABRIC_RJT:
+ vport->vport_stats.fdisc_rejects++;
+ bfa_fcs_vport_fdisc_rejected(vport);
+ break;
+
+ default:
+ vport->vport_stats.fdisc_rsp_err++;
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_ERROR);
+ }
+}
+
+/**
+ * LOGO response
+ */
+void
+bfa_cb_lps_fdisclogo_comp(void *bfad, void *uarg)
+{
+ struct bfa_fcs_vport_s *vport = uarg;
+ bfa_sm_send_event(vport, BFA_FCS_VPORT_SM_RSP_OK);
+}
+
+
#define CTX_OFFSET 0x10000
#define MAX_CID_CNT 0x4000
+#define BNX2I_570X_PAGE_SIZE_DEFAULT 4096
+
/* 5709 context registers */
#define BNX2_MQ_CONFIG2 0x00003d00
#define BNX2_MQ_CONFIG2_CONT_SZ (0x7L<<4)
ctx_sz = (config2 & BNX2_MQ_CONFIG2_CONT_SZ) >> 3;
if (ctx_sz)
reg_off = CTX_OFFSET + MAX_CID_CNT * MB_KERNEL_CTX_SIZE
- + PAGE_SIZE *
+ + BNX2I_570X_PAGE_SIZE_DEFAULT *
(((cid_num - first_l4l5) / ctx_sz) + 256);
else
reg_off = CTX_OFFSET + (MB_KERNEL_CTX_SIZE * cid_num);
cmds_max = BNX2I_SQ_WQES_MIN;
cls_session = iscsi_session_setup(&bnx2i_iscsi_transport, shost,
- cmds_max, sizeof(struct bnx2i_cmd),
+ cmds_max, 0, sizeof(struct bnx2i_cmd),
initial_cmdsn, ISCSI_MAX_TARGET);
if (!cls_session)
return NULL;
BUG_ON(hba != iscsi_host_priv(shost));
cls_session = iscsi_session_setup(&cxgb3i_iscsi_transport, shost,
- cmds_max,
+ cmds_max, 0,
sizeof(struct iscsi_tcp_task) +
sizeof(struct cxgb3i_task_data),
initial_cmdsn, ISCSI_MAX_TARGET);
if (!ret)
goto done;
- err = SCSI_DH_OK;
-
switch (sense_hdr.sense_key) {
case NO_SENSE:
case ABORTED_COMMAND:
}
size = size>>16;
size *= 4;
+ if (size > MAX_MESSAGE_SIZE) {
+ rcode = -EINVAL;
+ goto cleanup;
+ }
/* Copy in the user's I2O command */
if (copy_from_user (msg, user_msg, size)) {
rcode = -EFAULT;
/*
* HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
static char driver_name[] = "hptiop";
static const char driver_name_long[] = "RocketRAID 3xxx/4xxx Controller driver";
-static const char driver_ver[] = "v1.3 (071203)";
+static const char driver_ver[] = "v1.6 (090910)";
static int iop_send_sync_msg(struct hptiop_hba *hba, u32 msg, u32 millisec);
static void hptiop_finish_scsi_req(struct hptiop_hba *hba, u32 tag,
static int iop_intr_itl(struct hptiop_hba *hba)
{
struct hpt_iopmu_itl __iomem *iop = hba->u.itl.iop;
+ void __iomem *plx = hba->u.itl.plx;
u32 status;
int ret = 0;
+ if (plx && readl(plx + 0x11C5C) & 0xf)
+ writel(1, plx + 0x11C60);
+
status = readl(&iop->outbound_intstatus);
if (status & IOPMU_OUTBOUND_INT_MSG0) {
static int hptiop_map_pci_bar_itl(struct hptiop_hba *hba)
{
+ struct pci_dev *pcidev = hba->pcidev;
hba->u.itl.iop = hptiop_map_pci_bar(hba, 0);
- if (hba->u.itl.iop)
- return 0;
- else
+ if (hba->u.itl.iop == NULL)
return -1;
+ if ((pcidev->device & 0xff00) == 0x4400) {
+ hba->u.itl.plx = hba->u.itl.iop;
+ hba->u.itl.iop = hptiop_map_pci_bar(hba, 2);
+ if (hba->u.itl.iop == NULL) {
+ iounmap(hba->u.itl.plx);
+ return -1;
+ }
+ }
+ return 0;
}
static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba)
{
+ if (hba->u.itl.plx)
+ iounmap(hba->u.itl.plx);
iounmap(hba->u.itl.iop);
}
static struct pci_device_id hptiop_id_table[] = {
{ PCI_VDEVICE(TTI, 0x3220), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3320), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3510), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3511), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x3520), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3521), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3522), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x3410), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x3540), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
- { PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x4311), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4320), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+ { PCI_VDEVICE(TTI, 0x4400), (kernel_ulong_t)&hptiop_itl_ops },
{ PCI_VDEVICE(TTI, 0x3120), (kernel_ulong_t)&hptiop_mv_ops },
{ PCI_VDEVICE(TTI, 0x3122), (kernel_ulong_t)&hptiop_mv_ops },
{ PCI_VDEVICE(TTI, 0x3020), (kernel_ulong_t)&hptiop_mv_ops },
/*
* HighPoint RR3xxx/4xxx controller driver for Linux
- * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+ * Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
union {
struct {
struct hpt_iopmu_itl __iomem *iop;
+ void __iomem *plx;
} itl;
struct {
struct hpt_iopmv_regs *regs;
goto free_host;
cls_session = iscsi_session_setup(&iscsi_sw_tcp_transport, shost,
- cmds_max,
+ cmds_max, 0,
sizeof(struct iscsi_tcp_task) +
sizeof(struct iscsi_sw_tcp_hdrbuf),
initial_cmdsn, 0);
*/
struct iscsi_cls_session *
iscsi_session_setup(struct iscsi_transport *iscsit, struct Scsi_Host *shost,
- uint16_t cmds_max, int cmd_task_size,
+ uint16_t cmds_max, int dd_size, int cmd_task_size,
uint32_t initial_cmdsn, unsigned int id)
{
struct iscsi_host *ihost = shost_priv(shost);
scsi_cmds = total_cmds - ISCSI_MGMT_CMDS_MAX;
cls_session = iscsi_alloc_session(shost, iscsit,
- sizeof(struct iscsi_session));
+ sizeof(struct iscsi_session) +
+ dd_size);
if (!cls_session)
goto dec_session_count;
session = cls_session->dd_data;
session->max_cmdsn = initial_cmdsn + 1;
session->max_r2t = 1;
session->tt = iscsit;
+ session->dd_data = cls_session->dd_data + sizeof(*session);
mutex_init(&session->eh_mutex);
spin_lock_init(&session->lock);
"SCSI_PROT_WRITE_INSERT",
"SCSI_PROT_READ_PASS",
"SCSI_PROT_WRITE_PASS",
- "SCSI_PROT_READ_CONVERT",
- "SCSI_PROT_WRITE_CONVERT"
};
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
ret_prof = LPFC_PROF_A1;
break;
- case SCSI_PROT_READ_CONVERT:
- case SCSI_PROT_WRITE_CONVERT:
+ case SCSI_PROT_READ_PASS:
+ case SCSI_PROT_WRITE_PASS:
ret_prof = LPFC_PROF_AST1;
break;
- case SCSI_PROT_READ_PASS:
- case SCSI_PROT_WRITE_PASS:
case SCSI_PROT_NORMAL:
default:
printk(KERN_ERR "Bad op/guard:%d/%d combination\n",
ret_prof = LPFC_PROF_C1;
break;
- case SCSI_PROT_READ_CONVERT:
- case SCSI_PROT_WRITE_CONVERT:
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
case SCSI_PROT_NORMAL:
static int cnt;
if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
- op == SCSI_PROT_WRITE_PASS ||
- op == SCSI_PROT_WRITE_CONVERT)) {
+ op == SCSI_PROT_WRITE_PASS)) {
cnt++;
spt = page_address(sg_page(scsi_prot_sglist(sc))) +
case SCSI_PROT_WRITE_STRIP:
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
- case SCSI_PROT_WRITE_CONVERT:
- case SCSI_PROT_READ_CONVERT:
ret = LPFC_PG_TYPE_DIF_BUF;
break;
default:
# Kernel configuration file for the MPT2SAS
#
# This code is based on drivers/scsi/mpt2sas/Kconfig
-# Copyright (C) 2007-2008 LSI Corporation
+# Copyright (C) 2007-2009 LSI Corporation
# (mailto:DL-MPTFusionLinux@lsi.com)
# This program is free software; you can redistribute it and/or
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.11
+ * mpi2.h Version: 02.00.12
*
* Version History
* ---------------
* 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
* Moved LUN field defines from mpi2_init.h.
* 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
+ * In all request and reply descriptors, replaced VF_ID
+ * field with MSIxIndex field.
+ * Removed DevHandle field from
+ * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
+ * bytes reserved.
+ * Added RAID Accelerator functionality.
* --------------------------------------------------------------------------
*/
#define MPI2_VERSION_02_00 (0x0200)
/* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x0B)
+#define MPI2_HEADER_VERSION_UNIT (0x0C)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
typedef struct _MPI2_DEFAULT_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 DescriptorTypeDependent; /* 0x06 */
#define MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET (0x02)
#define MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY (0x06)
#define MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE (0x08)
+#define MPI2_REQ_DESCRIPT_FLAGS_RAID_ACCELERATOR (0x0A)
#define MPI2_REQ_DESCRIPT_FLAGS_IOC_FIFO_MARKER (0x01)
typedef struct _MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 Reserved1; /* 0x06 */
typedef struct _MPI2_SCSI_IO_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 DevHandle; /* 0x06 */
typedef struct _MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR
{
U8 RequestFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 LMID; /* 0x04 */
U16 IoIndex; /* 0x06 */
Mpi2SCSITargetRequestDescriptor_t,
MPI2_POINTER pMpi2SCSITargetRequestDescriptor_t;
+
+/* RAID Accelerator Request Descriptor */
+typedef struct _MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR {
+ U8 RequestFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U16 LMID; /* 0x04 */
+ U16 Reserved; /* 0x06 */
+} MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR,
+ Mpi2RAIDAcceleratorRequestDescriptor_t,
+ MPI2_POINTER pMpi2RAIDAcceleratorRequestDescriptor_t;
+
+
/* union of Request Descriptors */
typedef union _MPI2_REQUEST_DESCRIPTOR_UNION
{
- MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
- MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
- MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
- MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
- U64 Words;
+ MPI2_DEFAULT_REQUEST_DESCRIPTOR Default;
+ MPI2_HIGH_PRIORITY_REQUEST_DESCRIPTOR HighPriority;
+ MPI2_SCSI_IO_REQUEST_DESCRIPTOR SCSIIO;
+ MPI2_SCSI_TARGET_REQUEST_DESCRIPTOR SCSITarget;
+ MPI2_RAID_ACCEL_REQUEST_DESCRIPTOR RAIDAccelerator;
+ U64 Words;
} MPI2_REQUEST_DESCRIPTOR_UNION, MPI2_POINTER PTR_MPI2_REQUEST_DESCRIPTOR_UNION,
Mpi2RequestDescriptorUnion_t, MPI2_POINTER pMpi2RequestDescriptorUnion_t;
typedef struct _MPI2_DEFAULT_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U16 DescriptorTypeDependent1; /* 0x02 */
U32 DescriptorTypeDependent2; /* 0x04 */
} MPI2_DEFAULT_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_DEFAULT_REPLY_DESCRIPTOR,
Mpi2DefaultReplyDescriptor_t, MPI2_POINTER pMpi2DefaultReplyDescriptor_t;
/* defines for the ReplyFlags field */
-#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
-#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
-#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02)
-#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
-#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK (0x0F)
+#define MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS (0x00)
+#define MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY (0x01)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS (0x02)
+#define MPI2_RPY_DESCRIPT_FLAGS_TARGET_COMMAND_BUFFER (0x03)
+#define MPI2_RPY_DESCRIPT_FLAGS_RAID_ACCELERATOR_SUCCESS (0x05)
+#define MPI2_RPY_DESCRIPT_FLAGS_UNUSED (0x0F)
/* values for marking a reply descriptor as unused */
#define MPI2_RPY_DESCRIPT_UNUSED_WORD0_MARK (0xFFFFFFFF)
typedef struct _MPI2_ADDRESS_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U32 ReplyFrameAddress; /* 0x04 */
} MPI2_ADDRESS_REPLY_DESCRIPTOR, MPI2_POINTER PTR_MPI2_ADDRESS_REPLY_DESCRIPTOR,
typedef struct _MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U16 TaskTag; /* 0x04 */
- U16 DevHandle; /* 0x06 */
+ U16 Reserved1; /* 0x06 */
} MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
MPI2_POINTER PTR_MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR,
Mpi2SCSIIOSuccessReplyDescriptor_t,
typedef struct _MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U16 SMID; /* 0x02 */
U8 SequenceNumber; /* 0x04 */
U8 Reserved1; /* 0x05 */
typedef struct _MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR
{
U8 ReplyFlags; /* 0x00 */
- U8 VF_ID; /* 0x01 */
+ U8 MSIxIndex; /* 0x01 */
U8 VP_ID; /* 0x02 */
U8 Flags; /* 0x03 */
U16 InitiatorDevHandle; /* 0x04 */
#define MPI2_RPY_DESCRIPT_TCB_FLAGS_PHYNUM_MASK (0x3F)
+/* RAID Accelerator Success Reply Descriptor */
+typedef struct _MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR {
+ U8 ReplyFlags; /* 0x00 */
+ U8 MSIxIndex; /* 0x01 */
+ U16 SMID; /* 0x02 */
+ U32 Reserved; /* 0x04 */
+} MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+ MPI2_POINTER PTR_MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR,
+ Mpi2RAIDAcceleratorSuccessReplyDescriptor_t,
+ MPI2_POINTER pMpi2RAIDAcceleratorSuccessReplyDescriptor_t;
+
+
/* union of Reply Descriptors */
typedef union _MPI2_REPLY_DESCRIPTORS_UNION
{
- MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
- MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
- MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
- MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
- MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
- U64 Words;
+ MPI2_DEFAULT_REPLY_DESCRIPTOR Default;
+ MPI2_ADDRESS_REPLY_DESCRIPTOR AddressReply;
+ MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR SCSIIOSuccess;
+ MPI2_TARGETASSIST_SUCCESS_REPLY_DESCRIPTOR TargetAssistSuccess;
+ MPI2_TARGET_COMMAND_BUFFER_REPLY_DESCRIPTOR TargetCommandBuffer;
+ MPI2_RAID_ACCELERATOR_SUCCESS_REPLY_DESCRIPTOR RAIDAcceleratorSuccess;
+ U64 Words;
} MPI2_REPLY_DESCRIPTORS_UNION, MPI2_POINTER PTR_MPI2_REPLY_DESCRIPTORS_UNION,
Mpi2ReplyDescriptorsUnion_t, MPI2_POINTER pMpi2ReplyDescriptorsUnion_t;
#define MPI2_FUNCTION_DIAG_RELEASE (0x1E) /* Diagnostic Release */
#define MPI2_FUNCTION_TARGET_CMD_BUF_BASE_POST (0x24) /* Target Command Buffer Post Base */
#define MPI2_FUNCTION_TARGET_CMD_BUF_LIST_POST (0x25) /* Target Command Buffer Post List */
+#define MPI2_FUNCTION_RAID_ACCELERATOR (0x2C) /* RAID Accelerator*/
#define MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00A0)
+/****************************************************************************
+* RAID Accelerator values
+****************************************************************************/
+
+#define MPI2_IOCSTATUS_RAID_ACCEL_ERROR (0x00B0)
/****************************************************************************
* IOCStatus flag to indicate that log info is available
****************************************************************************/
-#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
+#define MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE (0x8000)
/****************************************************************************
* IOCLogInfo Types
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.10
+ * mpi2_cnfg.h Version: 02.00.11
*
* Version History
* ---------------
* Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
* Added PortGroups, DmaGroup, and ControlGroup fields to
* SAS Device Page 0.
+ * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
+ * Unit Page 6.
+ * Added expander reduced functionality data to SAS
+ * Expander Page 0.
+ * Added SAS PHY Page 2 and SAS PHY Page 3.
* --------------------------------------------------------------------------
*/
#define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
+/* IO Unit Page 5 */
+
+/*
+ * Upper layer code (drivers, utilities, etc.) should leave this define set to
+ * one and check Header.PageLength or NumDmaEngines at runtime.
+ */
+#ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
+#define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U64 RaidAcceleratorBufferBaseAddress; /* 0x04 */
+ U64 RaidAcceleratorBufferSize; /* 0x0C */
+ U64 RaidAcceleratorControlBaseAddress; /* 0x14 */
+ U8 RAControlSize; /* 0x1C */
+ U8 NumDmaEngines; /* 0x1D */
+ U8 RAMinControlSize; /* 0x1E */
+ U8 RAMaxControlSize; /* 0x1F */
+ U32 Reserved1; /* 0x20 */
+ U32 Reserved2; /* 0x24 */
+ U32 Reserved3; /* 0x28 */
+ U32 DmaEngineCapabilities
+ [MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /* 0x2C */
+} MPI2_CONFIG_PAGE_IO_UNIT_5, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
+ Mpi2IOUnitPage5_t, MPI2_POINTER pMpi2IOUnitPage5_t;
+
+#define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
+
+/* defines for IO Unit Page 5 DmaEngineCapabilities field */
+#define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFF00)
+#define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
+
+#define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
+#define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
+#define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
+#define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
+
+
+/* IO Unit Page 6 */
+
+typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
+ MPI2_CONFIG_PAGE_HEADER Header; /* 0x00 */
+ U16 Flags; /* 0x04 */
+ U8 RAHostControlSize; /* 0x06 */
+ U8 Reserved0; /* 0x07 */
+ U64 RaidAcceleratorHostControlBaseAddress; /* 0x08 */
+ U32 Reserved1; /* 0x10 */
+ U32 Reserved2; /* 0x14 */
+ U32 Reserved3; /* 0x18 */
+} MPI2_CONFIG_PAGE_IO_UNIT_6, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
+ Mpi2IOUnitPage6_t, MPI2_POINTER pMpi2IOUnitPage6_t;
+
+#define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
+
+/* defines for IO Unit Page 6 Flags field */
+#define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
+
+
/****************************************************************************
* IOC Config Pages
****************************************************************************/
U64 ActiveZoneManagerSASAddress;/* 0x2C */
U16 ZoneLockInactivityLimit; /* 0x34 */
U16 Reserved1; /* 0x36 */
+ U8 TimeToReducedFunc; /* 0x38 */
+ U8 InitialTimeToReducedFunc; /* 0x39 */
+ U8 MaxReducedFuncTime; /* 0x3A */
+ U8 Reserved2; /* 0x3B */
} MPI2_CONFIG_PAGE_EXPANDER_0, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
Mpi2ExpanderPage0_t, MPI2_POINTER pMpi2ExpanderPage0_t;
-#define MPI2_SASEXPANDER0_PAGEVERSION (0x05)
+#define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
/* values for SAS Expander Page 0 DiscoveryStatus field */
#define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
#define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
/* values for SAS Expander Page 0 Flags field */
+#define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
#define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
#define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
#define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
#define MPI2_SASPHY1_PAGEVERSION (0x01)
+/* SAS PHY Page 2 */
+
+typedef struct _MPI2_SASPHY2_PHY_EVENT {
+ U8 PhyEventCode; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U32 PhyEventInfo; /* 0x04 */
+} MPI2_SASPHY2_PHY_EVENT, MPI2_POINTER PTR_MPI2_SASPHY2_PHY_EVENT,
+ Mpi2SasPhy2PhyEvent_t, MPI2_POINTER pMpi2SasPhy2PhyEvent_t;
+
+/* use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
+
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY2_PHY_EVENT_MAX
+#define MPI2_SASPHY2_PHY_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U8 NumPhyEvents; /* 0x0C */
+ U8 Reserved2; /* 0x0D */
+ U16 Reserved3; /* 0x0E */
+ MPI2_SASPHY2_PHY_EVENT PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX];
+ /* 0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_2, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
+ Mpi2SasPhyPage2_t, MPI2_POINTER pMpi2SasPhyPage2_t;
+
+#define MPI2_SASPHY2_PAGEVERSION (0x00)
+
+
+/* SAS PHY Page 3 */
+
+typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
+ U8 PhyEventCode; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U16 Reserved2; /* 0x02 */
+ U8 CounterType; /* 0x04 */
+ U8 ThresholdWindow; /* 0x05 */
+ U8 TimeUnits; /* 0x06 */
+ U8 Reserved3; /* 0x07 */
+ U32 EventThreshold; /* 0x08 */
+ U16 ThresholdFlags; /* 0x0C */
+ U16 Reserved4; /* 0x0E */
+} MPI2_SASPHY3_PHY_EVENT_CONFIG, MPI2_POINTER PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
+ Mpi2SasPhy3PhyEventConfig_t, MPI2_POINTER pMpi2SasPhy3PhyEventConfig_t;
+
+/* values for PhyEventCode field */
+#define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
+#define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
+#define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
+#define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
+#define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
+#define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
+#define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
+#define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
+#define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
+#define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
+#define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
+#define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
+#define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
+#define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
+#define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
+#define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
+#define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
+#define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
+#define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
+#define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
+#define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
+#define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
+#define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
+#define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
+
+/* values for the CounterType field */
+#define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
+#define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
+#define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
+
+/* values for the TimeUnits field */
+#define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
+#define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
+#define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
+#define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
+
+/* values for the ThresholdFlags field */
+#define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
+#define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
+
+/*
+ * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
+ * one and check Header.ExtPageLength or NumPhyEvents at runtime.
+ */
+#ifndef MPI2_SASPHY3_PHY_EVENT_MAX
+#define MPI2_SASPHY3_PHY_EVENT_MAX (1)
+#endif
+
+typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
+ MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U8 NumPhyEvents; /* 0x0C */
+ U8 Reserved2; /* 0x0D */
+ U16 Reserved3; /* 0x0E */
+ MPI2_SASPHY3_PHY_EVENT_CONFIG PhyEventConfig
+ [MPI2_SASPHY3_PHY_EVENT_MAX]; /* 0x10 */
+} MPI2_CONFIG_PAGE_SAS_PHY_3, MPI2_POINTER PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
+ Mpi2SasPhyPage3_t, MPI2_POINTER pMpi2SasPhyPage3_t;
+
+#define MPI2_SASPHY3_PAGEVERSION (0x00)
+
+
/****************************************************************************
* SAS Port Config Pages
****************************************************************************/
--- /dev/null
+ ==============================
+ Fusion-MPT MPI 2.0 Header File Change History
+ ==============================
+
+ Copyright (c) 2000-2009 LSI Corporation.
+
+ ---------------------------------------
+ Header Set Release Version: 02.00.12
+ Header Set Release Date: 05-06-09
+ ---------------------------------------
+
+ Filename Current version Prior version
+ ---------- --------------- -------------
+ mpi2.h 02.00.12 02.00.11
+ mpi2_cnfg.h 02.00.11 02.00.10
+ mpi2_init.h 02.00.07 02.00.06
+ mpi2_ioc.h 02.00.11 02.00.10
+ mpi2_raid.h 02.00.03 02.00.03
+ mpi2_sas.h 02.00.02 02.00.02
+ mpi2_targ.h 02.00.03 02.00.03
+ mpi2_tool.h 02.00.03 02.00.02
+ mpi2_type.h 02.00.00 02.00.00
+ mpi2_ra.h 02.00.00
+ mpi2_history.txt 02.00.11 02.00.12
+
+
+ * Date Version Description
+ * -------- -------- ------------------------------------------------------
+
+mpi2.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 06-26-07 02.00.02 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 08-31-07 02.00.03 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Moved ReplyPostHostIndex register to offset 0x6C of the
+ * MPI2_SYSTEM_INTERFACE_REGS and modified the define for
+ * MPI2_REPLY_POST_HOST_INDEX_OFFSET.
+ * Added union of request descriptors.
+ * Added union of reply descriptors.
+ * 10-31-07 02.00.04 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added define for MPI2_VERSION_02_00.
+ * Fixed the size of the FunctionDependent5 field in the
+ * MPI2_DEFAULT_REPLY structure.
+ * 12-18-07 02.00.05 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Removed the MPI-defined Fault Codes and extended the
+ * product specific codes up to 0xEFFF.
+ * Added a sixth key value for the WriteSequence register
+ * and changed the flush value to 0x0.
+ * Added message function codes for Diagnostic Buffer Post
+ * and Diagnsotic Release.
+ * New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
+ * Moved MPI2_VERSION_UNION from mpi2_ioc.h.
+ * 02-29-08 02.00.06 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-03-08 02.00.07 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-21-08 02.00.08 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Added #defines for marking a reply descriptor as unused.
+ * 06-27-08 02.00.09 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 10-02-08 02.00.10 Bumped MPI2_HEADER_VERSION_UNIT.
+ * Moved LUN field defines from mpi2_init.h.
+ * 01-19-09 02.00.11 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-06-09 02.00.12 Bumped MPI2_HEADER_VERSION_UNIT.
+ * In all request and reply descriptors, replaced VF_ID
+ * field with MSIxIndex field.
+ * Removed DevHandle field from
+ * MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
+ * bytes reserved.
+ * Added RAID Accelerator functionality.
+ * --------------------------------------------------------------------------
+
+mpi2_cnfg.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
+ * Added Manufacturing Page 11.
+ * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
+ * define.
+ * 06-26-07 02.00.02 Adding generic structure for product-specific
+ * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
+ * Rework of BIOS Page 2 configuration page.
+ * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
+ * forms.
+ * Added configuration pages IOC Page 8 and Driver
+ * Persistent Mapping Page 0.
+ * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
+ * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
+ * RAID Physical Disk Pages 0 and 1, RAID Configuration
+ * Page 0).
+ * Added new value for AccessStatus field of SAS Device
+ * Page 0 (_SATA_NEEDS_INITIALIZATION).
+ * 10-31-07 02.00.04 Added missing SEPDevHandle field to
+ * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
+ * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
+ * NVDATA.
+ * Modified IOC Page 7 to use masks and added field for
+ * SASBroadcastPrimitiveMasks.
+ * Added MPI2_CONFIG_PAGE_BIOS_4.
+ * Added MPI2_CONFIG_PAGE_LOG_0.
+ * 02-29-08 02.00.06 Modified various names to make them 32-character unique.
+ * Added SAS Device IDs.
+ * Updated Integrated RAID configuration pages including
+ * Manufacturing Page 4, IOC Page 6, and RAID Configuration
+ * Page 0.
+ * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
+ * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
+ * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
+ * Added missing MaxNumRoutedSasAddresses field to
+ * MPI2_CONFIG_PAGE_EXPANDER_0.
+ * Added SAS Port Page 0.
+ * Modified structure layout for
+ * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
+ * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
+ * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
+ * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
+ * to 0x000000FF.
+ * Added two new values for the Physical Disk Coercion Size
+ * bits in the Flags field of Manufacturing Page 4.
+ * Added product-specific Manufacturing pages 16 to 31.
+ * Modified Flags bits for controlling write cache on SATA
+ * drives in IO Unit Page 1.
+ * Added new bit to AdditionalControlFlags of SAS IO Unit
+ * Page 1 to control Invalid Topology Correction.
+ * Added SupportedPhysDisks field to RAID Volume Page 1 and
+ * added related defines.
+ * Added additional defines for RAID Volume Page 0
+ * VolumeStatusFlags field.
+ * Modified meaning of RAID Volume Page 0 VolumeSettings
+ * define for auto-configure of hot-swap drives.
+ * Added PhysDiskAttributes field (and related defines) to
+ * RAID Physical Disk Page 0.
+ * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
+ * Added three new DiscoveryStatus bits for SAS IO Unit
+ * Page 0 and SAS Expander Page 0.
+ * Removed multiplexing information from SAS IO Unit pages.
+ * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
+ * Removed Zone Address Resolved bit from PhyInfo and from
+ * Expander Page 0 Flags field.
+ * Added two new AccessStatus values to SAS Device Page 0
+ * for indicating routing problems. Added 3 reserved words
+ * to this page.
+ * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
+ * Inserted missing reserved field into structure for IOC
+ * Page 6.
+ * Added more pending task bits to RAID Volume Page 0
+ * VolumeStatusFlags defines.
+ * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
+ * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
+ * and SAS Expander Page 0 to flag a downstream initiator
+ * when in simplified routing mode.
+ * Removed SATA Init Failure defines for DiscoveryStatus
+ * fields of SAS IO Unit Page 0 and SAS Expander Page 0.
+ * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
+ * Added PortGroups, DmaGroup, and ControlGroup fields to
+ * SAS Device Page 0.
+ * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
+ * Unit Page 6.
+ * Added expander reduced functionality data to SAS
+ * Expander Page 0.
+ * Added SAS PHY Page 2 and SAS PHY Page 3.
+ * --------------------------------------------------------------------------
+
+mpi2_init.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
+ * 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
+ * 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
+ * 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
+ * 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
+ * 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
+ * Control field Task Attribute flags.
+ * Moved LUN field defines to mpi2.h becasue they are
+ * common to many structures.
+ * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
+ * Query Asynchronous Event.
+ * Defined two new bits in the SlotStatus field of the SCSI
+ * Enclosure Processor Request and Reply.
+ * --------------------------------------------------------------------------
+
+mpi2_ioc.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
+ * MaxTargets.
+ * Added TotalImageSize field to FWDownload Request.
+ * Added reserved words to FWUpload Request.
+ * 06-26-07 02.00.02 Added IR Configuration Change List Event.
+ * 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
+ * request and replaced it with
+ * ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
+ * Replaced the MinReplyQueueDepth field of the IOCFacts
+ * reply with MaxReplyDescriptorPostQueueDepth.
+ * Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
+ * depth for the Reply Descriptor Post Queue.
+ * Added SASAddress field to Initiator Device Table
+ * Overflow Event data.
+ * 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
+ * for SAS Initiator Device Status Change Event data.
+ * Modified Reason Code defines for SAS Topology Change
+ * List Event data, including adding a bit for PHY Vacant
+ * status, and adding a mask for the Reason Code.
+ * Added define for
+ * MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
+ * Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
+ * 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
+ * the IOCFacts Reply.
+ * Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
+ * Moved MPI2_VERSION_UNION to mpi2.h.
+ * Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
+ * instead of enables, and added SASBroadcastPrimitiveMasks
+ * field.
+ * Added Log Entry Added Event and related structure.
+ * 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
+ * Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
+ * Added MaxVolumes and MaxPersistentEntries fields to
+ * IOCFacts reply.
+ * Added ProtocalFlags and IOCCapabilities fields to
+ * MPI2_FW_IMAGE_HEADER.
+ * Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
+ * 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
+ * a U16 (from a U32).
+ * Removed extra 's' from EventMasks name.
+ * 06-27-08 02.00.08 Fixed an offset in a comment.
+ * 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
+ * Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
+ * renamed MinReplyFrameSize to ReplyFrameSize.
+ * Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
+ * Added two new RAIDOperation values for Integrated RAID
+ * Operations Status Event data.
+ * Added four new IR Configuration Change List Event data
+ * ReasonCode values.
+ * Added two new ReasonCode defines for SAS Device Status
+ * Change Event data.
+ * Added three new DiscoveryStatus bits for the SAS
+ * Discovery event data.
+ * Added Multiplexing Status Change bit to the PhyStatus
+ * field of the SAS Topology Change List event data.
+ * Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
+ * BootFlags are now product-specific.
+ * Added defines for the indivdual signature bytes
+ * for MPI2_INIT_IMAGE_FOOTER.
+ * 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
+ * Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
+ * define.
+ * Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
+ * define.
+ * Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
+ * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
+ * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
+ * Added two new reason codes for SAS Device Status Change
+ * Event.
+ * Added new event: SAS PHY Counter.
+ * --------------------------------------------------------------------------
+
+mpi2_raid.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 08-31-07 02.00.01 Modifications to RAID Action request and reply,
+ * including the Actions and ActionData.
+ * 02-29-08 02.00.02 Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
+ * 05-21-08 02.00.03 Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
+ * the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
+ * can be sized by the build environment.
+ * --------------------------------------------------------------------------
+
+mpi2_sas.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 06-26-07 02.00.01 Added Clear All Persistent Operation to SAS IO Unit
+ * Control Request.
+ * 10-02-08 02.00.02 Added Set IOC Parameter Operation to SAS IO Unit Control
+ * Request.
+ * --------------------------------------------------------------------------
+
+mpi2_targ.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 08-31-07 02.00.01 Added Command Buffer Data Location Address Space bits to
+ * BufferPostFlags field of CommandBufferPostBase Request.
+ * 02-29-08 02.00.02 Modified various names to make them 32-character unique.
+ * 10-02-08 02.00.03 Removed NextCmdBufferOffset from
+ * MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST.
+ * Target Status Send Request only takes a single SGE for
+ * response data.
+ * --------------------------------------------------------------------------
+
+mpi2_tool.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
+ * structures and defines.
+ * 02-29-08 02.00.02 Modified various names to make them 32-character unique.
+ * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
+ * --------------------------------------------------------------------------
+
+mpi2_type.h
+ * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
+ * --------------------------------------------------------------------------
+
+mpi2_ra.h
+ * 05-06-09 02.00.00 Initial version.
+ * --------------------------------------------------------------------------
+
+mpi2_history.txt Parts list history
+
+Filename 02.00.12
+---------- --------
+mpi2.h 02.00.12
+mpi2_cnfg.h 02.00.11
+mpi2_init.h 02.00.07
+mpi2_ioc.h 02.00.11
+mpi2_raid.h 02.00.03
+mpi2_sas.h 02.00.02
+mpi2_targ.h 02.00.03
+mpi2_tool.h 02.00.03
+mpi2_type.h 02.00.00
+mpi2_ra.h 02.00.00
+
+Filename 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
+---------- -------- -------- -------- -------- -------- --------
+mpi2.h 02.00.11 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06
+mpi2_cnfg.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.06 02.00.06
+mpi2_init.h 02.00.06 02.00.06 02.00.05 02.00.05 02.00.04 02.00.03
+mpi2_ioc.h 02.00.10 02.00.09 02.00.08 02.00.07 02.00.07 02.00.06
+mpi2_raid.h 02.00.03 02.00.03 02.00.03 02.00.03 02.00.02 02.00.02
+mpi2_sas.h 02.00.02 02.00.02 02.00.01 02.00.01 02.00.01 02.00.01
+mpi2_targ.h 02.00.03 02.00.03 02.00.02 02.00.02 02.00.02 02.00.02
+mpi2_tool.h 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02 02.00.02
+mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
+
+Filename 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
+---------- -------- -------- -------- -------- -------- --------
+mpi2.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
+mpi2_cnfg.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
+mpi2_init.h 02.00.02 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00
+mpi2_ioc.h 02.00.05 02.00.04 02.00.03 02.00.02 02.00.01 02.00.00
+mpi2_raid.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00
+mpi2_sas.h 02.00.01 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00
+mpi2_targ.h 02.00.01 02.00.01 02.00.01 02.00.00 02.00.00 02.00.00
+mpi2_tool.h 02.00.01 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
+mpi2_type.h 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00 02.00.00
+
/*
- * Copyright (c) 2000-2008 LSI Corporation.
+ * Copyright (c) 2000-2009 LSI Corporation.
*
*
* Name: mpi2_init.h
* Title: MPI SCSI initiator mode messages and structures
* Creation Date: June 23, 2006
*
- * mpi2_init.h Version: 02.00.06
+ * mpi2_init.h Version: 02.00.07
*
* Version History
* ---------------
* Control field Task Attribute flags.
* Moved LUN field defines to mpi2.h becasue they are
* common to many structures.
+ * 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
+ * Query Asynchronous Event.
+ * Defined two new bits in the SlotStatus field of the SCSI
+ * Enclosure Processor Request and Reply.
* --------------------------------------------------------------------------
*/
#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
-#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (0x0A)
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
+
+/* obsolete TaskType name */
+#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION \
+ (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
/* MsgFlags bits */
#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
+#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
+#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
- * mpi2_ioc.h Version: 02.00.10
+ * mpi2_ioc.h Version: 02.00.11
*
* Version History
* ---------------
* Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
* define.
* Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
+ * 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
+ * Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
+ * Added two new reason codes for SAS Device Status Change
+ * Event.
+ * Added new event: SAS PHY Counter.
* --------------------------------------------------------------------------
*/
/* ProductID field uses MPI2_FW_HEADER_PID_ */
/* IOCCapabilities */
+#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
+#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000)
#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800)
#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
+#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
/* Log Entry Added Event data */
MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t;
/* SAS Device Status Change Event data ReasonCode values */
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
-#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11)
+#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12)
/* Integrated RAID Operation Status Event data */
#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
+/* SAS PHY Counter Event data */
+
+typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER {
+ U64 TimeStamp; /* 0x00 */
+ U32 Reserved1; /* 0x08 */
+ U8 PhyEventCode; /* 0x0C */
+ U8 PhyNum; /* 0x0D */
+ U16 Reserved2; /* 0x0E */
+ U32 PhyEventInfo; /* 0x10 */
+ U8 CounterType; /* 0x14 */
+ U8 ThresholdWindow; /* 0x15 */
+ U8 TimeUnits; /* 0x16 */
+ U8 Reserved3; /* 0x17 */
+ U32 EventThreshold; /* 0x18 */
+ U16 ThresholdFlags; /* 0x1C */
+ U16 Reserved4; /* 0x1E */
+} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+ MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
+ Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t;
+
+/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the
+ * PhyEventCode field
+ * use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the
+ * CounterType field
+ * use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the
+ * TimeUnits field
+ * use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the
+ * ThresholdFlags field
+ * */
+
+
/****************************************************************************
* EventAck message
****************************************************************************/
/*
- * Copyright (c) 2000-2008 LSI Corporation.
+ * Copyright (c) 2000-2009 LSI Corporation.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
- * mpi2_tool.h Version: 02.00.02
+ * mpi2_tool.h Version: 02.00.03
*
* Version History
* ---------------
* 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
* structures and defines.
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
+ * 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
* --------------------------------------------------------------------------
*/
/* defines for the Tools */
#define MPI2_TOOLBOX_CLEAN_TOOL (0x00)
#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
+#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
+#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
+
/****************************************************************************
* Toolbox reply
Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t;
+/****************************************************************************
+* Toolbox ISTWI Read Write Tool
+****************************************************************************/
+
+/* Toolbox ISTWI Read Write Tool request message */
+typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST {
+ U8 Tool; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 ChainOffset; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved2; /* 0x04 */
+ U8 Reserved3; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved4; /* 0x0A */
+ U32 Reserved5; /* 0x0C */
+ U32 Reserved6; /* 0x10 */
+ U8 DevIndex; /* 0x14 */
+ U8 Action; /* 0x15 */
+ U8 SGLFlags; /* 0x16 */
+ U8 Reserved7; /* 0x17 */
+ U16 TxDataLength; /* 0x18 */
+ U16 RxDataLength; /* 0x1A */
+ U32 Reserved8; /* 0x1C */
+ U32 Reserved9; /* 0x20 */
+ U32 Reserved10; /* 0x24 */
+ U32 Reserved11; /* 0x28 */
+ U32 Reserved12; /* 0x2C */
+ MPI2_SGE_SIMPLE_UNION SGL; /* 0x30 */
+} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+ MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
+ Mpi2ToolboxIstwiReadWriteRequest_t,
+ MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t;
+
+/* values for the Action field */
+#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01)
+#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02)
+#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03)
+#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10)
+#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11)
+#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12)
+
+/* values for SGLFlags field are in the SGL section of mpi2.h */
+
+
+/* Toolbox ISTWI Read Write Tool reply message */
+typedef struct _MPI2_TOOLBOX_ISTWI_REPLY {
+ U8 Tool; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 MsgLength; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved2; /* 0x04 */
+ U8 Reserved3; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved4; /* 0x0A */
+ U16 Reserved5; /* 0x0C */
+ U16 IOCStatus; /* 0x0E */
+ U32 IOCLogInfo; /* 0x10 */
+ U8 DevIndex; /* 0x14 */
+ U8 Action; /* 0x15 */
+ U8 IstwiStatus; /* 0x16 */
+ U8 Reserved6; /* 0x17 */
+ U16 TxDataCount; /* 0x18 */
+ U16 RxDataCount; /* 0x1A */
+} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY,
+ Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t;
+
+
/****************************************************************************
* Toolbox Beacon Tool request
****************************************************************************/
#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01)
+/****************************************************************************
+* Toolbox Diagnostic CLI Tool
+****************************************************************************/
+
+#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C)
+
+/* Toolbox Diagnostic CLI Tool request message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST {
+ U8 Tool; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 ChainOffset; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved2; /* 0x04 */
+ U8 Reserved3; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved4; /* 0x0A */
+ U8 SGLFlags; /* 0x0C */
+ U8 Reserved5; /* 0x0D */
+ U16 Reserved6; /* 0x0E */
+ U32 DataLength; /* 0x10 */
+ U8 DiagnosticCliCommand
+ [MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */
+ MPI2_SGE_SIMPLE_UNION SGL; /* 0x70 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+ MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
+ Mpi2ToolboxDiagnosticCliRequest_t,
+ MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t;
+
+/* values for SGLFlags field are in the SGL section of mpi2.h */
+
+
+/* Toolbox Diagnostic CLI Tool reply message */
+typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY {
+ U8 Tool; /* 0x00 */
+ U8 Reserved1; /* 0x01 */
+ U8 MsgLength; /* 0x02 */
+ U8 Function; /* 0x03 */
+ U16 Reserved2; /* 0x04 */
+ U8 Reserved3; /* 0x06 */
+ U8 MsgFlags; /* 0x07 */
+ U8 VP_ID; /* 0x08 */
+ U8 VF_ID; /* 0x09 */
+ U16 Reserved4; /* 0x0A */
+ U16 Reserved5; /* 0x0C */
+ U16 IOCStatus; /* 0x0E */
+ U32 IOCLogInfo; /* 0x10 */
+ U32 ReturnedDataLength; /* 0x14 */
+} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
+ MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
+ Mpi2ToolboxDiagnosticCliReply_t,
+ MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t;
+
+
/*****************************************************************************
*
* Diagnostic Buffer Messages
* for access to MPT (Message Passing Technology) firmware.
*
* This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2008 LSI Corporation
+ * Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS];
#define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */
-#define MPT2SAS_MAX_REQUEST_QUEUE 500 /* maximum controller queue depth */
+#define MPT2SAS_MAX_REQUEST_QUEUE 600 /* maximum controller queue depth */
static int max_queue_depth = -1;
module_param(max_queue_depth, int, 0);
* _base_display_reply_info -
* @ioc: pointer to scsi command object
* @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
* Return nothing.
*/
static void
-_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
+_base_display_reply_info(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
* mpt2sas_base_done - base internal command completion routine
* @ioc: pointer to scsi command object
* @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-void
-mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+u8
+mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK)
- return;
+ return 1;
if (ioc->base_cmds.status == MPT2_CMD_NOT_USED)
- return;
+ return 1;
ioc->base_cmds.status |= MPT2_CMD_COMPLETE;
if (mpi_reply) {
}
ioc->base_cmds.status &= ~MPT2_CMD_PENDING;
complete(&ioc->base_cmds.done);
+ return 1;
}
/**
* _base_async_event - main callback handler for firmware asyn events
* @ioc: pointer to scsi command object
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-static void
-_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
+static u8
+_base_async_event(struct MPT2SAS_ADAPTER *ioc, u8 msix_index, u32 reply)
{
Mpi2EventNotificationReply_t *mpi_reply;
Mpi2EventAckRequest_t *ack_request;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (!mpi_reply)
- return;
+ return 1;
if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION)
- return;
+ return 1;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
_base_display_event_data(ioc, mpi_reply);
#endif
ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
ack_request->Event = mpi_reply->Event;
ack_request->EventContext = mpi_reply->EventContext;
- ack_request->VF_ID = VF_ID;
- mpt2sas_base_put_smid_default(ioc, smid, VF_ID);
+ ack_request->VF_ID = 0; /* TODO */
+ ack_request->VP_ID = 0;
+ mpt2sas_base_put_smid_default(ioc, smid);
out:
/* scsih callback handler */
- mpt2sas_scsih_event_callback(ioc, VF_ID, reply);
+ mpt2sas_scsih_event_callback(ioc, msix_index, reply);
/* ctl callback handler */
- mpt2sas_ctl_event_callback(ioc, VF_ID, reply);
+ mpt2sas_ctl_event_callback(ioc, msix_index, reply);
+
+ return 1;
+}
+
+/**
+ * _base_get_cb_idx - obtain the callback index
+ * @ioc: per adapter object
+ * @smid: system request message index
+ *
+ * Return callback index.
+ */
+static u8
+_base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
+{
+ int i;
+ u8 cb_idx = 0xFF;
+
+ if (smid >= ioc->hi_priority_smid) {
+ if (smid < ioc->internal_smid) {
+ i = smid - ioc->hi_priority_smid;
+ cb_idx = ioc->hpr_lookup[i].cb_idx;
+ } else {
+ i = smid - ioc->internal_smid;
+ cb_idx = ioc->internal_lookup[i].cb_idx;
+ }
+ } else {
+ i = smid - 1;
+ cb_idx = ioc->scsi_lookup[i].cb_idx;
+ }
+ return cb_idx;
}
/**
{
u32 him_register;
- writel(0, &ioc->chip->HostInterruptStatus);
him_register = readl(&ioc->chip->HostInterruptMask);
him_register &= ~MPI2_HIM_RIM;
writel(him_register, &ioc->chip->HostInterruptMask);
u16 smid;
u8 cb_idx;
u32 reply;
- u8 VF_ID;
+ u8 msix_index;
struct MPT2SAS_ADAPTER *ioc = bus_id;
Mpi2ReplyDescriptorsUnion_t *rpf;
+ u8 rc;
if (ioc->mask_interrupts)
return IRQ_NONE;
reply = 0;
cb_idx = 0xFF;
smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1);
- VF_ID = rpf->Default.VF_ID;
+ msix_index = rpf->Default.MSIxIndex;
if (request_desript_type ==
MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) {
reply = le32_to_cpu
MPI2_RPY_DESCRIPT_FLAGS_TARGETASSIST_SUCCESS)
goto next;
if (smid)
- cb_idx = ioc->scsi_lookup[smid - 1].cb_idx;
+ cb_idx = _base_get_cb_idx(ioc, smid);
if (smid && cb_idx != 0xFF) {
- mpt_callbacks[cb_idx](ioc, smid, VF_ID, reply);
+ rc = mpt_callbacks[cb_idx](ioc, smid, msix_index,
+ reply);
if (reply)
- _base_display_reply_info(ioc, smid, VF_ID,
+ _base_display_reply_info(ioc, smid, msix_index,
reply);
- mpt2sas_base_free_smid(ioc, smid);
+ if (rc)
+ mpt2sas_base_free_smid(ioc, smid);
}
if (!smid)
- _base_async_event(ioc, VF_ID, reply);
+ _base_async_event(ioc, msix_index, reply);
/* reply free queue handling */
if (reply) {
return r;
}
-/**
- * mpt2sas_base_get_msg_frame_dma - obtain request mf pointer phys addr
- * @ioc: per adapter object
- * @smid: system request message index(smid zero is invalid)
- *
- * Returns phys pointer to message frame.
- */
-dma_addr_t
-mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- return ioc->request_dma + (smid * ioc->request_sz);
-}
-
/**
* mpt2sas_base_get_msg_frame - obtain request mf pointer
* @ioc: per adapter object
}
/**
- * mpt2sas_base_get_smid - obtain a free smid
+ * mpt2sas_base_get_smid - obtain a free smid from internal queue
* @ioc: per adapter object
* @cb_idx: callback index
*
struct request_tracker *request;
u16 smid;
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (list_empty(&ioc->internal_free_list)) {
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ printk(MPT2SAS_ERR_FMT "%s: smid not available\n",
+ ioc->name, __func__);
+ return 0;
+ }
+
+ request = list_entry(ioc->internal_free_list.next,
+ struct request_tracker, tracker_list);
+ request->cb_idx = cb_idx;
+ smid = request->smid;
+ list_del(&request->tracker_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return smid;
+}
+
+/**
+ * mpt2sas_base_get_smid_scsiio - obtain a free smid from scsiio queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ * @scmd: pointer to scsi command object
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
+ struct scsi_cmnd *scmd)
+{
+ unsigned long flags;
+ struct request_tracker *request;
+ u16 smid;
+
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
if (list_empty(&ioc->free_list)) {
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
request = list_entry(ioc->free_list.next,
struct request_tracker, tracker_list);
+ request->scmd = scmd;
+ request->cb_idx = cb_idx;
+ smid = request->smid;
+ list_del(&request->tracker_list);
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return smid;
+}
+
+/**
+ * mpt2sas_base_get_smid_hpr - obtain a free smid from hi-priority queue
+ * @ioc: per adapter object
+ * @cb_idx: callback index
+ *
+ * Returns smid (zero is invalid)
+ */
+u16
+mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx)
+{
+ unsigned long flags;
+ struct request_tracker *request;
+ u16 smid;
+
+ spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
+ if (list_empty(&ioc->hpr_free_list)) {
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return 0;
+ }
+
+ request = list_entry(ioc->hpr_free_list.next,
+ struct request_tracker, tracker_list);
request->cb_idx = cb_idx;
smid = request->smid;
list_del(&request->tracker_list);
mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
unsigned long flags;
+ int i;
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- ioc->scsi_lookup[smid - 1].cb_idx = 0xFF;
- list_add_tail(&ioc->scsi_lookup[smid - 1].tracker_list,
+ if (smid >= ioc->hi_priority_smid) {
+ if (smid < ioc->internal_smid) {
+ /* hi-priority */
+ i = smid - ioc->hi_priority_smid;
+ ioc->hpr_lookup[i].cb_idx = 0xFF;
+ list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+ &ioc->hpr_free_list);
+ } else {
+ /* internal queue */
+ i = smid - ioc->internal_smid;
+ ioc->internal_lookup[i].cb_idx = 0xFF;
+ list_add_tail(&ioc->internal_lookup[i].tracker_list,
+ &ioc->internal_free_list);
+ }
+ spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return;
+ }
+
+ /* scsiio queue */
+ i = smid - 1;
+ ioc->scsi_lookup[i].cb_idx = 0xFF;
+ ioc->scsi_lookup[i].scmd = NULL;
+ list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
* mpt2sas_base_put_smid_scsi_io - send SCSI_IO request to firmware
* @ioc: per adapter object
* @smid: system request message index
- * @vf_id: virtual function id
* @handle: device handle
*
* Return nothing.
*/
void
-mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id,
- u16 handle)
+mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO;
- descriptor.SCSIIO.VF_ID = vf_id;
+ descriptor.SCSIIO.MSIxIndex = 0; /* TODO */
descriptor.SCSIIO.SMID = cpu_to_le16(smid);
descriptor.SCSIIO.DevHandle = cpu_to_le16(handle);
descriptor.SCSIIO.LMID = 0;
* mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
* @ioc: per adapter object
* @smid: system request message index
- * @vf_id: virtual function id
*
* Return nothing.
*/
void
-mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u8 vf_id)
+mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
descriptor.HighPriority.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY;
- descriptor.HighPriority.VF_ID = vf_id;
+ descriptor.HighPriority.MSIxIndex = 0; /* TODO */
descriptor.HighPriority.SMID = cpu_to_le16(smid);
descriptor.HighPriority.LMID = 0;
descriptor.HighPriority.Reserved1 = 0;
* mpt2sas_base_put_smid_default - Default, primarily used for config pages
* @ioc: per adapter object
* @smid: system request message index
- * @vf_id: virtual function id
*
* Return nothing.
*/
void
-mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id)
+mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
- descriptor.Default.VF_ID = vf_id;
+ descriptor.Default.MSIxIndex = 0; /* TODO */
descriptor.Default.SMID = cpu_to_le16(smid);
descriptor.Default.LMID = 0;
descriptor.Default.DescriptorTypeDependent = 0;
* mpt2sas_base_put_smid_target_assist - send Target Assist/Status to firmware
* @ioc: per adapter object
* @smid: system request message index
- * @vf_id: virtual function id
* @io_index: value used to track the IO
*
* Return nothing.
*/
void
mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u8 vf_id, u16 io_index)
+ u16 io_index)
{
Mpi2RequestDescriptorUnion_t descriptor;
u64 *request = (u64 *)&descriptor;
descriptor.SCSITarget.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_SCSI_TARGET;
- descriptor.SCSITarget.VF_ID = vf_id;
+ descriptor.SCSITarget.MSIxIndex = 0; /* TODO */
descriptor.SCSITarget.SMID = cpu_to_le16(smid);
descriptor.SCSITarget.LMID = 0;
descriptor.SCSITarget.IoIndex = cpu_to_le16(io_index);
}
kfree(ioc->scsi_lookup);
+ kfree(ioc->hpr_lookup);
+ kfree(ioc->internal_lookup);
}
u16 num_of_reply_frames;
u16 chains_needed_per_io;
u32 sz, total_sz;
- u16 i;
u32 retry_sz;
u16 max_request_credit;
MPT2SAS_MAX_REQUEST_QUEUE) ? MPT2SAS_MAX_REQUEST_QUEUE :
facts->RequestCredit;
}
- ioc->request_depth = max_request_credit;
+
+ ioc->hba_queue_depth = max_request_credit;
+ ioc->hi_priority_depth = facts->HighPriorityCredit;
+ ioc->internal_depth = ioc->hi_priority_depth + 5;
/* request frame size */
ioc->request_sz = facts->IOCRequestFrameSize * 4;
ioc->chains_needed_per_io = chains_needed_per_io;
/* reply free queue sizing - taking into account for events */
- num_of_reply_frames = ioc->request_depth + 32;
+ num_of_reply_frames = ioc->hba_queue_depth + 32;
/* number of replies frames can't be a multiple of 16 */
/* decrease number of reply frames by 1 */
* frames
*/
- queue_size = ioc->request_depth + num_of_reply_frames + 1;
+ queue_size = ioc->hba_queue_depth + num_of_reply_frames + 1;
/* round up to 16 byte boundary */
if (queue_size % 16)
queue_size += 16 - (queue_size % 16);
if (queue_diff % 16)
queue_diff += 16 - (queue_diff % 16);
- /* adjust request_depth, reply_free_queue_depth,
+ /* adjust hba_queue_depth, reply_free_queue_depth,
* and queue_size
*/
- ioc->request_depth -= queue_diff;
+ ioc->hba_queue_depth -= queue_diff;
ioc->reply_free_queue_depth -= queue_diff;
queue_size -= queue_diff;
}
ioc->reply_post_queue_depth = queue_size;
- /* max scsi host queue depth */
- ioc->shost->can_queue = ioc->request_depth - INTERNAL_CMDS_COUNT;
- dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host queue: depth"
- "(%d)\n", ioc->name, ioc->shost->can_queue));
-
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scatter gather: "
"sge_in_main_msg(%d), sge_per_chain(%d), sge_per_io(%d), "
"chains_per_io(%d)\n", ioc->name, ioc->max_sges_in_main_message,
ioc->max_sges_in_chain_message, ioc->shost->sg_tablesize,
ioc->chains_needed_per_io));
+ ioc->scsiio_depth = ioc->hba_queue_depth -
+ ioc->hi_priority_depth - ioc->internal_depth;
+
+ /* set the scsi host can_queue depth
+ * with some internal commands that could be outstanding
+ */
+ ioc->shost->can_queue = ioc->scsiio_depth - (2);
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: "
+ "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue));
+
/* contiguous pool for request and chains, 16 byte align, one extra "
* "frame for smid=0
*/
- ioc->chain_depth = ioc->chains_needed_per_io * ioc->request_depth;
- sz = ((ioc->request_depth + 1 + ioc->chain_depth) * ioc->request_sz);
+ ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth;
+ sz = ((ioc->scsiio_depth + 1 + ioc->chain_depth) * ioc->request_sz);
+
+ /* hi-priority queue */
+ sz += (ioc->hi_priority_depth * ioc->request_sz);
+
+ /* internal queue */
+ sz += (ioc->internal_depth * ioc->request_sz);
ioc->request_dma_sz = sz;
ioc->request = pci_alloc_consistent(ioc->pdev, sz, &ioc->request_dma);
if (!ioc->request) {
printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
- "failed: req_depth(%d), chains_per_io(%d), frame_sz(%d), "
- "total(%d kB)\n", ioc->name, ioc->request_depth,
+ "failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+ "total(%d kB)\n", ioc->name, ioc->hba_queue_depth,
ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
- if (ioc->request_depth < MPT2SAS_SAS_QUEUE_DEPTH)
+ if (ioc->scsiio_depth < MPT2SAS_SAS_QUEUE_DEPTH)
goto out;
retry_sz += 64;
- ioc->request_depth = max_request_credit - retry_sz;
+ ioc->hba_queue_depth = max_request_credit - retry_sz;
goto retry_allocation;
}
if (retry_sz)
printk(MPT2SAS_ERR_FMT "request pool: pci_alloc_consistent "
- "succeed: req_depth(%d), chains_per_io(%d), frame_sz(%d), "
- "total(%d kb)\n", ioc->name, ioc->request_depth,
+ "succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), "
+ "total(%d kb)\n", ioc->name, ioc->hba_queue_depth,
ioc->chains_needed_per_io, ioc->request_sz, sz/1024);
- ioc->chain = ioc->request + ((ioc->request_depth + 1) *
+
+ /* hi-priority queue */
+ ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) *
+ ioc->request_sz);
+ ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) *
+ ioc->request_sz);
+
+ /* internal queue */
+ ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth *
+ ioc->request_sz);
+ ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth *
+ ioc->request_sz);
+
+ ioc->chain = ioc->internal + (ioc->internal_depth *
ioc->request_sz);
- ioc->chain_dma = ioc->request_dma + ((ioc->request_depth + 1) *
+ ioc->chain_dma = ioc->internal_dma + (ioc->internal_depth *
ioc->request_sz);
+
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "request pool(0x%p): "
"depth(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name,
- ioc->request, ioc->request_depth, ioc->request_sz,
- ((ioc->request_depth + 1) * ioc->request_sz)/1024));
+ ioc->request, ioc->hba_queue_depth, ioc->request_sz,
+ (ioc->hba_queue_depth * ioc->request_sz)/1024));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "chain pool(0x%p): depth"
"(%d), frame_size(%d), pool_size(%d kB)\n", ioc->name, ioc->chain,
ioc->chain_depth, ioc->request_sz, ((ioc->chain_depth *
ioc->name, (unsigned long long) ioc->request_dma));
total_sz += sz;
- ioc->scsi_lookup = kcalloc(ioc->request_depth,
+ ioc->scsi_lookup = kcalloc(ioc->scsiio_depth,
sizeof(struct request_tracker), GFP_KERNEL);
if (!ioc->scsi_lookup) {
printk(MPT2SAS_ERR_FMT "scsi_lookup: kcalloc failed\n",
goto out;
}
- /* initialize some bits */
- for (i = 0; i < ioc->request_depth; i++)
- ioc->scsi_lookup[i].smid = i + 1;
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsiio(0x%p): "
+ "depth(%d)\n", ioc->name, ioc->request,
+ ioc->scsiio_depth));
+
+ /* initialize hi-priority queue smid's */
+ ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth,
+ sizeof(struct request_tracker), GFP_KERNEL);
+ if (!ioc->hpr_lookup) {
+ printk(MPT2SAS_ERR_FMT "hpr_lookup: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->hi_priority_smid = ioc->scsiio_depth + 1;
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "hi_priority(0x%p): "
+ "depth(%d), start smid(%d)\n", ioc->name, ioc->hi_priority,
+ ioc->hi_priority_depth, ioc->hi_priority_smid));
+
+ /* initialize internal queue smid's */
+ ioc->internal_lookup = kcalloc(ioc->internal_depth,
+ sizeof(struct request_tracker), GFP_KERNEL);
+ if (!ioc->internal_lookup) {
+ printk(MPT2SAS_ERR_FMT "internal_lookup: kcalloc failed\n",
+ ioc->name);
+ goto out;
+ }
+ ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth;
+ dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "internal(0x%p): "
+ "depth(%d), start smid(%d)\n", ioc->name, ioc->internal,
+ ioc->internal_depth, ioc->internal_smid));
/* sense buffers, 4 byte align */
- sz = ioc->request_depth * SCSI_SENSE_BUFFERSIZE;
+ sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE;
ioc->sense_dma_pool = pci_pool_create("sense pool", ioc->pdev, sz, 4,
0);
if (!ioc->sense_dma_pool) {
}
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT
"sense pool(0x%p): depth(%d), element_size(%d), pool_size"
- "(%d kB)\n", ioc->name, ioc->sense, ioc->request_depth,
+ "(%d kB)\n", ioc->name, ioc->sense, ioc->scsiio_depth,
SCSI_SENSE_BUFFERSIZE, sz/1024));
dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "sense_dma(0x%llx)\n",
ioc->name, (unsigned long long)ioc->sense_dma));
((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)),
&ioc->chip->Doorbell);
- if ((_base_wait_for_doorbell_int(ioc, 5, sleep_flag))) {
+ if ((_base_wait_for_doorbell_int(ioc, 5, NO_SLEEP))) {
printk(MPT2SAS_ERR_FMT "doorbell handshake "
"int failed (line=%d)\n", ioc->name, __LINE__);
return -EFAULT;
if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET)
ioc->ioc_link_reset_in_progress = 1;
- mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->base_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET ||
request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->base_cmds.smid = smid;
memcpy(request, mpi_request, sizeof(Mpi2SepReply_t));
- mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->base_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
msecs_to_jiffies(10000));
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
/**
* _base_send_ioc_init - send ioc_init to firmware
* @ioc: per adapter object
- * @VF_ID: virtual function id
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
-_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
+_base_send_ioc_init(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2IOCInitRequest_t mpi_request;
Mpi2IOCInitReply_t mpi_reply;
memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t));
mpi_request.Function = MPI2_FUNCTION_IOC_INIT;
mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER;
- mpi_request.VF_ID = VF_ID;
+ mpi_request.VF_ID = 0; /* TODO */
+ mpi_request.VP_ID = 0;
mpi_request.MsgVersion = cpu_to_le16(MPI2_VERSION);
mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION);
/**
* _base_send_port_enable - send port_enable(discovery stuff) to firmware
* @ioc: per adapter object
- * @VF_ID: virtual function id
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
-_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
+_base_send_port_enable(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2PortEnableRequest_t *mpi_request;
u32 ioc_state;
ioc->base_cmds.smid = smid;
memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t));
mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE;
- mpi_request->VF_ID = VF_ID;
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
- mpt2sas_base_put_smid_default(ioc, smid, VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->base_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done,
300*HZ);
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
/**
* _base_event_notification - send event notification
* @ioc: per adapter object
- * @VF_ID: virtual function id
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
-_base_event_notification(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, int sleep_flag)
+_base_event_notification(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
Mpi2EventNotificationRequest_t *mpi_request;
unsigned long timeleft;
ioc->base_cmds.smid = smid;
memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t));
mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
- mpi_request->VF_ID = VF_ID;
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
mpi_request->EventMasks[i] =
le32_to_cpu(ioc->event_masks[i]);
- mpt2sas_base_put_smid_default(ioc, smid, VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->base_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ);
if (!(ioc->base_cmds.status & MPT2_CMD_COMPLETE)) {
printk(MPT2SAS_ERR_FMT "%s: timeout\n",
return;
mutex_lock(&ioc->base_cmds.mutex);
- _base_event_notification(ioc, 0, CAN_SLEEP);
+ _base_event_notification(ioc, CAN_SLEEP);
mutex_unlock(&ioc->base_cmds.mutex);
}
drsprintk(ioc, printk(MPT2SAS_DEBUG_FMT "clear interrupts\n",
ioc->name));
- writel(0, &ioc->chip->HostInterruptStatus);
count = 0;
do {
/**
* _base_make_ioc_operational - put controller in OPERATIONAL state
* @ioc: per adapter object
- * @VF_ID: virtual function id
* @sleep_flag: CAN_SLEEP or NO_SLEEP
*
* Returns 0 for success, non-zero for failure.
*/
static int
-_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- int sleep_flag)
+_base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, int sleep_flag)
{
int r, i;
unsigned long flags;
u32 reply_address;
+ u16 smid;
+ struct _tr_list *delayed_tr, *delayed_tr_next;
dinitprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
+ /* clean the delayed target reset list */
+ list_for_each_entry_safe(delayed_tr, delayed_tr_next,
+ &ioc->delayed_tr_list, list) {
+ list_del(&delayed_tr->list);
+ kfree(delayed_tr);
+ }
+
/* initialize the scsi lookup free list */
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
INIT_LIST_HEAD(&ioc->free_list);
- for (i = 0; i < ioc->request_depth; i++) {
+ smid = 1;
+ for (i = 0; i < ioc->scsiio_depth; i++, smid++) {
ioc->scsi_lookup[i].cb_idx = 0xFF;
+ ioc->scsi_lookup[i].smid = smid;
+ ioc->scsi_lookup[i].scmd = NULL;
list_add_tail(&ioc->scsi_lookup[i].tracker_list,
&ioc->free_list);
}
+
+ /* hi-priority queue */
+ INIT_LIST_HEAD(&ioc->hpr_free_list);
+ smid = ioc->hi_priority_smid;
+ for (i = 0; i < ioc->hi_priority_depth; i++, smid++) {
+ ioc->hpr_lookup[i].cb_idx = 0xFF;
+ ioc->hpr_lookup[i].smid = smid;
+ list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+ &ioc->hpr_free_list);
+ }
+
+ /* internal queue */
+ INIT_LIST_HEAD(&ioc->internal_free_list);
+ smid = ioc->internal_smid;
+ for (i = 0; i < ioc->internal_depth; i++, smid++) {
+ ioc->internal_lookup[i].cb_idx = 0xFF;
+ ioc->internal_lookup[i].smid = smid;
+ list_add_tail(&ioc->internal_lookup[i].tracker_list,
+ &ioc->internal_free_list);
+ }
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
/* initialize Reply Free Queue */
for (i = 0; i < ioc->reply_post_queue_depth; i++)
ioc->reply_post_free[i].Words = ULLONG_MAX;
- r = _base_send_ioc_init(ioc, VF_ID, sleep_flag);
+ r = _base_send_ioc_init(ioc, sleep_flag);
if (r)
return r;
writel(0, &ioc->chip->ReplyPostHostIndex);
_base_unmask_interrupts(ioc);
- r = _base_event_notification(ioc, VF_ID, sleep_flag);
+ r = _base_event_notification(ioc, sleep_flag);
if (r)
return r;
if (sleep_flag == CAN_SLEEP)
_base_static_config_pages(ioc);
- r = _base_send_port_enable(ioc, VF_ID, sleep_flag);
+ r = _base_send_port_enable(ioc, sleep_flag);
if (r)
return r;
if (r)
goto out_free_resources;
+ ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
+ sizeof(Mpi2PortFactsReply_t), GFP_KERNEL);
+ if (!ioc->pfacts)
+ goto out_free_resources;
+
+ for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
+ r = _base_get_port_facts(ioc, i, CAN_SLEEP);
+ if (r)
+ goto out_free_resources;
+ }
+
r = _base_allocate_memory_pools(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
/* base internal command bits */
mutex_init(&ioc->base_cmds.mutex);
- init_completion(&ioc->base_cmds.done);
ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->base_cmds.status = MPT2_CMD_NOT_USED;
ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->transport_cmds.status = MPT2_CMD_NOT_USED;
mutex_init(&ioc->transport_cmds.mutex);
- init_completion(&ioc->transport_cmds.done);
/* task management internal command bits */
ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL);
ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
mutex_init(&ioc->ctl_cmds.mutex);
- init_completion(&ioc->ctl_cmds.done);
for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++)
ioc->event_masks[i] = -1;
_base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS);
_base_unmask_events(ioc, MPI2_EVENT_TASK_SET_FULL);
_base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED);
-
- ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts,
- sizeof(Mpi2PortFactsReply_t), GFP_KERNEL);
- if (!ioc->pfacts)
- goto out_free_resources;
-
- for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) {
- r = _base_get_port_facts(ioc, i, CAN_SLEEP);
- if (r)
- goto out_free_resources;
- }
- r = _base_make_ioc_operational(ioc, 0, CAN_SLEEP);
+ r = _base_make_ioc_operational(ioc, CAN_SLEEP);
if (r)
goto out_free_resources;
/* pending command count */
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- for (i = 0; i < ioc->request_depth; i++)
+ for (i = 0; i < ioc->scsiio_depth; i++)
if (ioc->scsi_lookup[i].cb_idx != 0xFF)
ioc->pending_io_count++;
spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
enum reset_type type)
{
- int r, i;
+ int r;
unsigned long flags;
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
if (r)
goto out;
_base_reset_handler(ioc, MPT2_IOC_AFTER_RESET);
- for (i = 0 ; i < ioc->facts.NumberOfPorts; i++)
- r = _base_make_ioc_operational(ioc, ioc->pfacts[i].VF_ID,
- sleep_flag);
+ r = _base_make_ioc_operational(ioc, sleep_flag);
if (!r)
_base_reset_handler(ioc, MPT2_IOC_DONE_RESET);
out:
* for access to MPT (Message Passing Technology) firmware.
*
* This code is based on drivers/scsi/mpt2sas/mpt2_base.h
- * Copyright (C) 2007-2008 LSI Corporation
+ * Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "01.100.06.00"
-#define MPT2SAS_MAJOR_VERSION 01
+#define MPT2SAS_DRIVER_VERSION "02.100.03.00"
+#define MPT2SAS_MAJOR_VERSION 02
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 06
+#define MPT2SAS_BUILD_VERSION 03
#define MPT2SAS_RELEASE_VERSION 00
/*
* SAS Topology Structures
*/
+#define MPTSAS_STATE_TR_SEND 0x0001
+#define MPTSAS_STATE_TR_COMPLETE 0x0002
+#define MPTSAS_STATE_CNTRL_SEND 0x0004
+#define MPTSAS_STATE_CNTRL_COMPLETE 0x0008
+
+#define MPT2SAS_REQ_SAS_CNTRL 0x0010
+
/**
* struct _sas_device - attached device information
* @list: sas device list
u16 slot;
u8 hidden_raid_component;
u8 responding;
+ u16 state;
};
/**
struct list_head tracker_list;
};
+/**
+ * struct _tr_list - target reset list
+ * @handle: device handle
+ * @state: state machine
+ */
+struct _tr_list {
+ struct list_head list;
+ u16 handle;
+ u16 state;
+};
+
typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
/**
* @config_page_sz: config page size
* @config_page: reserve memory for config page payload
* @config_page_dma:
+ * @hba_queue_depth: hba request queue depth
* @sge_size: sg element size for either 32/64 bit
- * @request_depth: hba request queue depth
+ * @scsiio_depth: SCSI_IO queue depth
* @request_sz: per request frame size
* @request: pool of request frames
* @request_dma:
* @chains_needed_per_io: max chains per io
* @chain_offset_value_for_main_message: location 1st sg in main
* @chain_depth: total chains allocated
+ * @hi_priority_smid:
+ * @hi_priority:
+ * @hi_priority_dma:
+ * @hi_priority_depth:
+ * @hpr_lookup:
+ * @hpr_free_list:
+ * @internal_smid:
+ * @internal:
+ * @internal_dma:
+ * @internal_depth:
+ * @internal_lookup:
+ * @internal_free_list:
* @sense: pool of sense
* @sense_dma:
* @sense_dma_pool:
u8 ctl_cb_idx;
u8 base_cb_idx;
u8 config_cb_idx;
+ u8 tm_tr_cb_idx;
+ u8 tm_sas_control_cb_idx;
struct _internal_cmd base_cmds;
struct _internal_cmd transport_cmds;
struct _internal_cmd tm_cmds;
void *config_page;
dma_addr_t config_page_dma;
- /* request */
+ /* scsiio request */
+ u16 hba_queue_depth;
u16 sge_size;
- u16 request_depth;
+ u16 scsiio_depth;
u16 request_sz;
u8 *request;
dma_addr_t request_dma;
u16 chain_offset_value_for_main_message;
u16 chain_depth;
+ /* hi-priority queue */
+ u16 hi_priority_smid;
+ u8 *hi_priority;
+ dma_addr_t hi_priority_dma;
+ u16 hi_priority_depth;
+ struct request_tracker *hpr_lookup;
+ struct list_head hpr_free_list;
+
+ /* internal queue */
+ u16 internal_smid;
+ u8 *internal;
+ dma_addr_t internal_dma;
+ u16 internal_depth;
+ struct request_tracker *internal_lookup;
+ struct list_head internal_free_list;
+
/* sense */
u8 *sense;
dma_addr_t sense_dma;
struct dma_pool *reply_post_free_dma_pool;
u32 reply_post_host_index;
+ struct list_head delayed_tr_list;
+
/* diag buffer support */
u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
};
-typedef void (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
+typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply);
void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid);
void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid);
void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr);
-dma_addr_t mpt2sas_base_get_msg_frame_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-dma_addr_t mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc, u16 smid);
+dma_addr_t mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
+ u16 smid);
+
+/* hi-priority queue */
+u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
+u16 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
+ struct scsi_cmnd *scmd);
u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid);
-void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id,
+void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid,
u16 handle);
-void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id);
+void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid);
void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- u8 vf_id, u16 io_index);
-void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 vf_id);
+ u16 io_index);
+void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid);
void mpt2sas_base_initialize_callback_handler(void);
u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func);
void mpt2sas_base_release_callback_handler(u8 cb_idx);
-void mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply);
+u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply);
void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type);
/* scsih shared API */
+u8 mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
+ u32 reply);
void mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
u8 type, u16 smid_task, ulong timeout);
void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address(
struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
-void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply);
void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
/* config shared API */
-void mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply);
+u8 mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply);
int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys);
int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
extern struct device_attribute *mpt2sas_dev_attrs[];
void mpt2sas_ctl_init(void);
void mpt2sas_ctl_exit(void);
-void mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply);
+u8 mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply);
void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
-void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply);
+u8 mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
+ u32 reply);
void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
Mpi2EventNotificationReply_t *mpi_reply);
/* transport shared API */
-void mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply);
+u8 mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply);
struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc,
u16 handle, u16 parent_handle);
void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
extern struct sas_function_template mpt2sas_transport_functions;
extern struct scsi_transport_template *mpt2sas_transport_template;
extern int scsi_internal_device_block(struct scsi_device *sdev);
+extern u8 mpt2sas_stm_zero_smid_handler(struct MPT2SAS_ADAPTER *ioc,
+ u8 msix_index, u32 reply);
extern int scsi_internal_device_unblock(struct scsi_device *sdev);
#endif /* MPT2SAS_BASE_H_INCLUDED */
* This module provides common API for accessing firmware configuration pages
*
* This code is based on drivers/scsi/mpt2sas/mpt2_base.c
- * Copyright (C) 2007-2008 LSI Corporation
+ * Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* mpt2sas_config_done - config page completion routine
* @ioc: per adapter object
* @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: none.
*
* The callback handler when using _config_request.
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-void
-mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+u8
+mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
if (ioc->config_cmds.status == MPT2_CMD_NOT_USED)
- return;
+ return 1;
if (ioc->config_cmds.smid != smid)
- return;
+ return 1;
ioc->config_cmds.status |= MPT2_CMD_COMPLETE;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply) {
#endif
ioc->config_cmds.smid = USHORT_MAX;
complete(&ioc->config_cmds.done);
+ return 1;
}
/**
retry_count = 0;
memset(&mem, 0, sizeof(struct config_request));
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
+
if (config_page) {
mpi_request->Header.PageVersion = mpi_reply->Header.PageVersion;
mpi_request->Header.PageNumber = mpi_reply->Header.PageNumber;
_config_display_some_debug(ioc, smid, "config_request", NULL);
#endif
init_completion(&ioc->config_cmds.done);
- mpt2sas_base_put_smid_default(ioc, smid, config_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->config_cmds.done,
timeout*HZ);
if (!(ioc->config_cmds.status & MPT2_CMD_COMPLETE)) {
* controllers
*
* This code is based on drivers/scsi/mpt2sas/mpt2_ctl.c
- * Copyright (C) 2007-2008 LSI Corporation
+ * Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* mpt2sas_ctl_done - ctl module completion routine
* @ioc: per adapter object
* @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: none.
*
* The callback handler when using ioc->ctl_cb_idx.
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-void
-mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+u8
+mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
if (ioc->ctl_cmds.status == MPT2_CMD_NOT_USED)
- return;
+ return 1;
if (ioc->ctl_cmds.smid != smid)
- return;
+ return 1;
ioc->ctl_cmds.status |= MPT2_CMD_COMPLETE;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply) {
#endif
ioc->ctl_cmds.status &= ~MPT2_CMD_PENDING;
complete(&ioc->ctl_cmds.done);
+ return 1;
}
/**
/**
* mpt2sas_ctl_event_callback - firmware event handler (called at ISR time)
* @ioc: per adapter object
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: interrupt.
*
* This function merely adds a new work task into ioc->firmware_event_thread.
* The tasks are worked from _firmware_event_work in user context.
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-void
-mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
+u8
+mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
+ u32 reply)
{
Mpi2EventNotificationReply_t *mpi_reply;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
mpt2sas_ctl_add_to_event_log(ioc, mpi_reply);
+ return 1;
}
/**
handle = le16_to_cpu(tm_request->DevHandle);
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- for (i = ioc->request_depth; i && !found; i--) {
+ for (i = ioc->scsiio_depth; i && !found; i--) {
scmd = ioc->scsi_lookup[i - 1].scmd;
if (scmd == NULL || scmd->device == NULL ||
scmd->device->hostdata == NULL)
printk(MPT2SAS_INFO_FMT "%s: ioc is operational\n",
ioc->name, __func__);
- smid = mpt2sas_base_get_smid(ioc, ioc->ctl_cb_idx);
+ smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->ctl_cb_idx, NULL);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
(u32)mpt2sas_base_get_sense_buffer_dma(ioc, smid);
priv_sense = mpt2sas_base_get_sense_buffer(ioc, smid);
memset(priv_sense, 0, SCSI_SENSE_BUFFERSIZE);
- mpt2sas_base_put_smid_scsi_io(ioc, smid, 0,
+ mpt2sas_base_put_smid_scsi_io(ioc, smid,
le16_to_cpu(mpi_request->FunctionDependent1));
break;
}
mutex_lock(&ioc->tm_cmds.mutex);
mpt2sas_scsih_set_tm_flag(ioc, le16_to_cpu(
tm_request->DevHandle));
- mpt2sas_base_put_smid_hi_priority(ioc, smid,
- mpi_request->VF_ID);
+ mpt2sas_base_put_smid_hi_priority(ioc, smid);
break;
}
case MPI2_FUNCTION_SMP_PASSTHROUGH:
ioc->ioc_link_reset_in_progress = 1;
ioc->ignore_loginfos = 1;
}
- mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
ioc->ioc_link_reset_in_progress = 1;
ioc->ignore_loginfos = 1;
}
- mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
break;
}
default:
- mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
break;
}
timeout = MPT2_IOCTL_DEFAULT_TIMEOUT;
else
timeout = karg.timeout;
+ init_completion(&ioc->ctl_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
timeout*HZ);
if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
mpi_request->Flags = cpu_to_le32(karg.diagnostic_flags);
mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
mpi_request->BufferLength = cpu_to_le32(request_data_sz);
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(0x%p), "
"dma(0x%llx), sz(%d)\n", ioc->name, __func__, request_data,
mpi_request->ProductSpecific[i] =
cpu_to_le32(ioc->product_specific[buffer_type][i]);
- mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->ctl_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
mpi_request->BufferType = buffer_type;
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
- mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->ctl_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
for (i = 0; i < MPT2_PRODUCT_SPECIFIC_DWORDS; i++)
mpi_request->ProductSpecific[i] =
cpu_to_le32(ioc->product_specific[buffer_type][i]);
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
- mpt2sas_base_put_smid_default(ioc, smid, mpi_request->VF_ID);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->ctl_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT2_IOCTL_DEFAULT_TIMEOUT*HZ);
_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
+
lock_kernel();
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg);
unlock_kernel();
_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
{
long ret;
+
lock_kernel();
if (cmd == MPT2COMMAND32)
ret = _ctl_compat_mpt_command(file, cmd, arg);
* controllers
*
* This code is based on drivers/scsi/mpt2sas/mpt2_ctl.h
- * Copyright (C) 2007-2008 LSI Corporation
+ * Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* Logging Support for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt2sas/mpt2_debug.c
- * Copyright (C) 2007-2008 LSI Corporation
+ * Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* Scsi Host Layer for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt2sas/mpt2_scsih.c
- * Copyright (C) 2007-2008 LSI Corporation
+ * Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
static u8 config_cb_idx = -1;
static int mpt_ids;
+static u8 tm_tr_cb_idx = -1 ;
+static u8 tm_sas_control_cb_idx = -1;
+
/* command line options */
static u32 logging_level;
MODULE_PARM_DESC(logging_level, " bits for enabling additional logging info "
* @work: work object (ioc->fault_reset_work_q)
* @ioc: per adapter object
* @VF_ID: virtual function id
+ * @VP_ID: virtual port id
* @host_reset_handling: handling events during host reset
* @ignore: flag meaning this event has been marked to ignore
* @event: firmware event MPI2_EVENT_XXX defined in mpt2_ioc.h
struct work_struct work;
struct MPT2SAS_ADAPTER *ioc;
u8 VF_ID;
+ u8 VP_ID;
u8 host_reset_handling;
u8 ignore;
u16 event;
* @lun: lun number
* @cdb_length: cdb length
* @cdb: cdb contents
- * @valid_reply: flag set for reply message
* @timeout: timeout for this command
+ * @VF_ID: virtual function id
+ * @VP_ID: virtual port id
+ * @valid_reply: flag set for reply message
* @sense_length: sense length
* @ioc_status: ioc status
* @scsi_state: scsi state
u8 cdb_length;
u8 cdb[32];
u8 timeout;
+ u8 VF_ID;
+ u8 VP_ID;
u8 valid_reply;
/* the following bits are only valid when 'valid_reply = 1' */
u32 sense_length;
}
/**
- * _scsih_scsi_lookup_get - returns scmd entry
+ * mptscsih_get_scsi_lookup - returns scmd entry
* @ioc: per adapter object
* @smid: system request message index
- * Context: This function will acquire ioc->scsi_lookup_lock.
*
* Returns the smid stored scmd pointer.
*/
static struct scsi_cmnd *
_scsih_scsi_lookup_get(struct MPT2SAS_ADAPTER *ioc, u16 smid)
{
- unsigned long flags;
- struct scsi_cmnd *scmd;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- scmd = ioc->scsi_lookup[smid - 1].scmd;
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return scmd;
-}
-
-/**
- * mptscsih_getclear_scsi_lookup - returns scmd entry
- * @ioc: per adapter object
- * @smid: system request message index
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * Returns the smid stored scmd pointer, as well as clearing the scmd pointer.
- */
-static struct scsi_cmnd *
-_scsih_scsi_lookup_getclear(struct MPT2SAS_ADAPTER *ioc, u16 smid)
-{
- unsigned long flags;
- struct scsi_cmnd *scmd;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- scmd = ioc->scsi_lookup[smid - 1].scmd;
- ioc->scsi_lookup[smid - 1].scmd = NULL;
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
- return scmd;
-}
-
-/**
- * _scsih_scsi_lookup_set - updates scmd entry in lookup
- * @ioc: per adapter object
- * @smid: system request message index
- * @scmd: pointer to scsi command object
- * Context: This function will acquire ioc->scsi_lookup_lock.
- *
- * This will save scmd pointer in the scsi_lookup array.
- *
- * Return nothing.
- */
-static void
-_scsih_scsi_lookup_set(struct MPT2SAS_ADAPTER *ioc, u16 smid,
- struct scsi_cmnd *scmd)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
- ioc->scsi_lookup[smid - 1].scmd = scmd;
- spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
+ return ioc->scsi_lookup[smid - 1].scmd;
}
/**
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
smid = 0;
- for (i = 0; i < ioc->request_depth; i++) {
+ for (i = 0; i < ioc->scsiio_depth; i++) {
if (ioc->scsi_lookup[i].scmd == scmd) {
- smid = i + 1;
+ smid = ioc->scsi_lookup[i].smid;
goto out;
}
}
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
found = 0;
- for (i = 0 ; i < ioc->request_depth; i++) {
+ for (i = 0 ; i < ioc->scsiio_depth; i++) {
if (ioc->scsi_lookup[i].scmd &&
(ioc->scsi_lookup[i].scmd->device->id == id &&
ioc->scsi_lookup[i].scmd->device->channel == channel)) {
spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
found = 0;
- for (i = 0 ; i < ioc->request_depth; i++) {
+ for (i = 0 ; i < ioc->scsiio_depth; i++) {
if (ioc->scsi_lookup[i].scmd &&
(ioc->scsi_lookup[i].scmd->device->id == id &&
ioc->scsi_lookup[i].scmd->device->channel == channel &&
}
/**
- * _scsih_change_queue_depth - changing device queue tag type
+ * _scsih_change_queue_type - changing device queue tag type
* @sdev: scsi device struct
* @tag_type: requested tag type
*
* _scsih_tm_done - tm completion routine
* @ioc: per adapter object
* @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: none.
*
* The callback handler when using scsih_issue_tm.
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-static void
-_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+static u8
+_scsih_tm_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
if (ioc->tm_cmds.status == MPT2_CMD_NOT_USED)
- return;
+ return 1;
if (ioc->tm_cmds.smid != smid)
- return;
+ return 1;
ioc->tm_cmds.status |= MPT2_CMD_COMPLETE;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply) {
}
ioc->tm_cmds.status &= ~MPT2_CMD_PENDING;
complete(&ioc->tm_cmds.done);
+ return 1;
}
/**
u16 smid = 0;
u32 ioc_state;
unsigned long timeleft;
- u8 VF_ID = 0;
if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n",
goto issue_host_reset;
}
- smid = mpt2sas_base_get_smid(ioc, ioc->tm_cb_idx);
+ smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
}
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x),"
- " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type, smid));
+ " task_type(0x%02x), smid(%d)\n", ioc->name, handle, type,
+ smid_task));
ioc->tm_cmds.status = MPT2_CMD_PENDING;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
ioc->tm_cmds.smid = smid;
mpi_request->DevHandle = cpu_to_le16(handle);
mpi_request->TaskType = type;
mpi_request->TaskMID = cpu_to_le16(smid_task);
+ mpi_request->VP_ID = 0; /* TODO */
+ mpi_request->VF_ID = 0;
int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
mpt2sas_scsih_set_tm_flag(ioc, handle);
init_completion(&ioc->tm_cmds.done);
- mpt2sas_base_put_smid_hi_priority(ioc, smid, VF_ID);
+ mpt2sas_base_put_smid_hi_priority(ioc, smid);
timeleft = wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
mpt2sas_scsih_clear_tm_flag(ioc, handle);
if (!(ioc->tm_cmds.status & MPT2_CMD_COMPLETE)) {
}
/**
- * _scsih_abort - eh threads main host reset routine
+ * _scsih_host_reset - eh threads main host reset routine
* @sdev: scsi device struct
*
* Returns SUCCESS if command aborted else FAILED
}
}
+/**
+ * _scsih_tm_tr_send - send task management request
+ * @ioc: per adapter object
+ * @handle: device handle
+ * Context: interrupt time.
+ *
+ * This code is to initiate the device removal handshake protocal
+ * with controller firmware. This function will issue target reset
+ * using high priority request queue. It will send a sas iounit
+ * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ *
+ * This is designed to send muliple task management request at the same
+ * time to the fifo. If the fifo is full, we will append the request,
+ * and process it in a future completion.
+ */
+static void
+_scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
+{
+ Mpi2SCSITaskManagementRequest_t *mpi_request;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ u16 smid;
+ struct _sas_device *sas_device;
+ unsigned long flags;
+ struct _tr_list *delayed_tr;
+
+ if (ioc->shost_recovery) {
+ printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
+ __func__, ioc->name);
+ return;
+ }
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
+ ioc->name, __func__);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ /* skip is hidden raid component */
+ if (sas_device->hidden_raid_component)
+ return;
+
+ smid = mpt2sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
+ if (!smid) {
+ delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
+ if (!delayed_tr)
+ return;
+ INIT_LIST_HEAD(&delayed_tr->list);
+ delayed_tr->handle = handle;
+ delayed_tr->state = MPT2SAS_REQ_SAS_CNTRL;
+ list_add_tail(&delayed_tr->list,
+ &ioc->delayed_tr_list);
+ if (sas_device->starget)
+ dewtprintk(ioc, starget_printk(KERN_INFO,
+ sas_device->starget, "DELAYED:tr:handle(0x%04x), "
+ "(open)\n", sas_device->handle));
+ return;
+ }
+
+ if (sas_device->starget && sas_device->starget->hostdata) {
+ sas_target_priv_data = sas_device->starget->hostdata;
+ sas_target_priv_data->tm_busy = 1;
+ dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
+ "tr:handle(0x%04x), (open)\n", sas_device->handle));
+ }
+
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
+ memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
+ mpi_request->DevHandle = cpu_to_le16(handle);
+ mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
+ sas_device->state |= MPTSAS_STATE_TR_SEND;
+ sas_device->state |= MPT2SAS_REQ_SAS_CNTRL;
+ mpt2sas_base_put_smid_hi_priority(ioc, smid);
+}
+
+
+
+/**
+ * _scsih_sas_control_complete - completion routine
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the sas iounit controll completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocal with controller firmware.
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+static u8
+_scsih_sas_control_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
+ u8 msix_index, u32 reply)
+{
+ unsigned long flags;
+ u16 handle;
+ struct _sas_device *sas_device;
+ Mpi2SasIoUnitControlReply_t *mpi_reply =
+ mpt2sas_base_get_reply_virt_addr(ioc, reply);
+
+ handle = le16_to_cpu(mpi_reply->DevHandle);
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
+ ioc->name, __func__);
+ return 1;
+ }
+ sas_device->state |= MPTSAS_STATE_CNTRL_COMPLETE;
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ if (sas_device->starget)
+ dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
+ "sc_complete:handle(0x%04x), "
+ "ioc_status(0x%04x), loginfo(0x%08x)\n",
+ handle, le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo)));
+ return 1;
+}
+
+/**
+ * _scsih_tm_tr_complete -
+ * @ioc: per adapter object
+ * @smid: system request message index
+ * @msix_index: MSIX table index supplied by the OS
+ * @reply: reply message frame(lower 32bit addr)
+ * Context: interrupt time.
+ *
+ * This is the target reset completion routine.
+ * This code is part of the code to initiate the device removal
+ * handshake protocal with controller firmware.
+ * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE)
+ *
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
+ */
+static u8
+_scsih_tm_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
+ u32 reply)
+{
+ unsigned long flags;
+ u16 handle;
+ struct _sas_device *sas_device;
+ Mpi2SCSITaskManagementReply_t *mpi_reply =
+ mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ Mpi2SasIoUnitControlRequest_t *mpi_request;
+ u16 smid_sas_ctrl;
+ struct MPT2SAS_TARGET *sas_target_priv_data;
+ struct _tr_list *delayed_tr;
+ u8 rc;
+
+ handle = le16_to_cpu(mpi_reply->DevHandle);
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = _scsih_sas_device_find_by_handle(ioc, handle);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ printk(MPT2SAS_ERR_FMT "%s: failed finding sas_device\n",
+ ioc->name, __func__);
+ return 1;
+ }
+ sas_device->state |= MPTSAS_STATE_TR_COMPLETE;
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+
+ if (sas_device->starget)
+ dewtprintk(ioc, starget_printk(KERN_INFO, sas_device->starget,
+ "tr_complete:handle(0x%04x), (%s) ioc_status(0x%04x), "
+ "loginfo(0x%08x), completed(%d)\n",
+ sas_device->handle, (sas_device->state &
+ MPT2SAS_REQ_SAS_CNTRL) ? "open" : "active",
+ le16_to_cpu(mpi_reply->IOCStatus),
+ le32_to_cpu(mpi_reply->IOCLogInfo),
+ le32_to_cpu(mpi_reply->TerminationCount)));
+
+ if (sas_device->starget && sas_device->starget->hostdata) {
+ sas_target_priv_data = sas_device->starget->hostdata;
+ sas_target_priv_data->tm_busy = 0;
+ }
+
+ if (!list_empty(&ioc->delayed_tr_list)) {
+ delayed_tr = list_entry(ioc->delayed_tr_list.next,
+ struct _tr_list, list);
+ mpt2sas_base_free_smid(ioc, smid);
+ if (delayed_tr->state & MPT2SAS_REQ_SAS_CNTRL)
+ _scsih_tm_tr_send(ioc, delayed_tr->handle);
+ list_del(&delayed_tr->list);
+ kfree(delayed_tr);
+ rc = 0; /* tells base_interrupt not to free mf */
+ } else
+ rc = 1;
+
+
+ if (!(sas_device->state & MPT2SAS_REQ_SAS_CNTRL))
+ return rc;
+
+ if (ioc->shost_recovery) {
+ printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
+ __func__, ioc->name);
+ return rc;
+ }
+
+ smid_sas_ctrl = mpt2sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
+ if (!smid_sas_ctrl) {
+ printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
+ ioc->name, __func__);
+ return rc;
+ }
+
+ mpi_request = mpt2sas_base_get_msg_frame(ioc, smid_sas_ctrl);
+ memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
+ mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
+ mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
+ mpi_request->DevHandle = mpi_reply->DevHandle;
+ sas_device->state |= MPTSAS_STATE_CNTRL_SEND;
+ mpt2sas_base_put_smid_default(ioc, smid_sas_ctrl);
+ return rc;
+}
+
/**
* _scsih_check_topo_delete_events - sanity check on topo events
* @ioc: per adapter object
u16 expander_handle;
struct _sas_node *sas_expander;
unsigned long flags;
+ int i, reason_code;
+ u16 handle;
+
+ for (i = 0 ; i < event_data->NumEntries; i++) {
+ if (event_data->PHY[i].PhyStatus &
+ MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
+ continue;
+ handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
+ if (!handle)
+ continue;
+ reason_code = event_data->PHY[i].PhyStatus &
+ MPI2_EVENT_SAS_TOPO_RC_MASK;
+ if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
+ _scsih_tm_tr_send(ioc, handle);
+ }
expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
if (expander_handle < ioc->sas_hba.num_phys) {
u16 smid;
u16 count = 0;
- for (smid = 1; smid <= ioc->request_depth; smid++) {
- scmd = _scsih_scsi_lookup_getclear(ioc, smid);
+ for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
+ scmd = _scsih_scsi_lookup_get(ioc, smid);
if (!scmd)
continue;
count++;
if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON))
mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
- smid = mpt2sas_base_get_smid(ioc, ioc->scsi_io_cb_idx);
+ smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
if (!smid) {
printk(MPT2SAS_ERR_FMT "%s: failed obtaining a smid\n",
ioc->name, __func__);
mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
mpi_request->SGLFlags = cpu_to_le16(MPI2_SCSIIO_SGLFLAGS_TYPE_MPI +
MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR);
-
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
mpi_request->LUN);
memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
}
}
- _scsih_scsi_lookup_set(ioc, smid, scmd);
- mpt2sas_base_put_smid_scsi_io(ioc, smid, 0,
+ mpt2sas_base_put_smid_scsi_io(ioc, smid,
sas_device_priv_data->sas_target->handle);
return 0;
* _scsih_io_done - scsi request callback
* @ioc: per adapter object
* @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
- * Callback handler when using scsih_qcmd.
+ * Callback handler when using _scsih_qcmd.
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-static void
-_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
+static u8
+_scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
{
Mpi2SCSIIORequest_t *mpi_request;
Mpi2SCSIIOReply_t *mpi_reply;
u32 response_code;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
- scmd = _scsih_scsi_lookup_getclear(ioc, smid);
+ scmd = _scsih_scsi_lookup_get(ioc, smid);
if (scmd == NULL)
- return;
+ return 1;
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
out:
scsi_dma_unmap(scmd);
scmd->scsi_done(scmd);
+ return 1;
}
/**
}
}
- sas_address = le64_to_cpu(expander_pg0.SASAddress);
-
spin_lock_irqsave(&ioc->sas_node_lock, flags);
+ sas_address = le64_to_cpu(expander_pg0.SASAddress);
sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
sas_address);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
if (ioc->remove_host)
goto out;
+ if ((sas_device->state & MPTSAS_STATE_TR_COMPLETE)) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip "
+ "target_reset handle(0x%04x)\n", ioc->name, handle));
+ goto skip_tr;
+ }
+
/* Target Reset to flush out all the outstanding IO */
device_handle = (sas_device->hidden_raid_component) ?
sas_device->volume_handle : handle;
if (ioc->shost_recovery)
goto out;
}
+ skip_tr:
+
+ if ((sas_device->state & MPTSAS_STATE_CNTRL_COMPLETE)) {
+ dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "\tskip "
+ "sas_cntrl handle(0x%04x)\n", ioc->name, handle));
+ goto out;
+ }
/* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */
dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sas_iounit: handle"
mpi_request.Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
mpi_request.Operation = MPI2_SAS_OP_REMOVE_DEVICE;
mpi_request.DevHandle = handle;
- mpi_request.VF_ID = 0;
+ mpi_request.VF_ID = 0; /* TODO */
+ mpi_request.VP_ID = 0;
if ((mpt2sas_base_sas_iounit_control(ioc, &mpi_reply,
&mpi_request)) != 0) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
/**
* _scsih_sas_topology_change_event - handle topology changes
* @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
- * fw_event:
+ * @fw_event: The fw_event_work object
* Context: user.
*
*/
static void
-_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataSasTopologyChangeList_t *event_data,
+_scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc,
struct fw_event_work *fw_event)
{
int i;
struct _sas_node *sas_expander;
unsigned long flags;
u8 link_rate_;
+ Mpi2EventDataSasTopologyChangeList_t *event_data = fw_event->event_data;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
}
if (ioc->shost_recovery)
return;
- if (event_data->PHY[i].PhyStatus &
- MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
+ phy_number = event_data->StartPhyNum + i;
+ reason_code = event_data->PHY[i].PhyStatus &
+ MPI2_EVENT_SAS_TOPO_RC_MASK;
+ if ((event_data->PHY[i].PhyStatus &
+ MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
+ MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
continue;
handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
if (!handle)
continue;
- phy_number = event_data->StartPhyNum + i;
- reason_code = event_data->PHY[i].PhyStatus &
- MPI2_EVENT_SAS_TOPO_RC_MASK;
link_rate_ = event_data->PHY[i].LinkRate >> 4;
switch (reason_code) {
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
/**
* _scsih_sas_device_status_change_event - handle device status change
* @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
-_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataSasDeviceStatusChange_t *event_data)
+_scsih_sas_device_status_change_event(struct MPT2SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
{
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
- _scsih_sas_device_status_change_event_debug(ioc, event_data);
+ _scsih_sas_device_status_change_event_debug(ioc,
+ fw_event->event_data);
#endif
}
/**
* _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
* @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
_scsih_sas_enclosure_dev_status_change_event(struct MPT2SAS_ADAPTER *ioc,
- u8 VF_ID, Mpi2EventDataSasEnclDevStatusChange_t *event_data)
+ struct fw_event_work *fw_event)
{
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
_scsih_sas_enclosure_dev_status_change_event_debug(ioc,
- event_data);
+ fw_event->event_data);
#endif
}
/**
* _scsih_sas_broadcast_primative_event - handle broadcast events
* @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
-_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataSasBroadcastPrimitive_t *event_data)
+_scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
{
struct scsi_cmnd *scmd;
u16 smid, handle;
u32 termination_count;
u32 query_count;
Mpi2SCSITaskManagementReply_t *mpi_reply;
-
+#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
+ Mpi2EventDataSasBroadcastPrimitive_t *event_data = fw_event->event_data;
+#endif
dewtprintk(ioc, printk(MPT2SAS_DEBUG_FMT "broadcast primative: "
"phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
event_data->PortWidth));
-
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: enter\n", ioc->name,
__func__));
termination_count = 0;
query_count = 0;
mpi_reply = ioc->tm_cmds.reply;
- for (smid = 1; smid <= ioc->request_depth; smid++) {
+ for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
scmd = _scsih_scsi_lookup_get(ioc, smid);
if (!scmd)
continue;
/**
* _scsih_sas_discovery_event - handle discovery events
* @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
-_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataSasDiscovery_t *event_data)
+_scsih_sas_discovery_event(struct MPT2SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
{
+ Mpi2EventDataSasDiscovery_t *event_data = fw_event->event_data;
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
printk(MPT2SAS_DEBUG_FMT "discovery event: (%s)", ioc->name,
(event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
"start" : "stop");
if (event_data->DiscoveryStatus)
- printk(MPT2SAS_DEBUG_FMT ", discovery_status(0x%08x)",
- ioc->name, le32_to_cpu(event_data->DiscoveryStatus));
+ printk("discovery_status(0x%08x)",
+ le32_to_cpu(event_data->DiscoveryStatus));
printk("\n");
}
#endif
/**
* _scsih_sas_ir_config_change_event - handle ir configuration change events
* @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
-_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataIrConfigChangeList_t *event_data)
+_scsih_sas_ir_config_change_event(struct MPT2SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
{
Mpi2EventIrConfigElement_t *element;
int i;
u8 foreign_config;
+ Mpi2EventDataIrConfigChangeList_t *event_data = fw_event->event_data;
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
/**
* _scsih_sas_ir_volume_event - IR volume event
* @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
-_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataIrVolume_t *event_data)
+_scsih_sas_ir_volume_event(struct MPT2SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
{
u64 wwid;
unsigned long flags;
u32 state;
int rc;
struct MPT2SAS_TARGET *sas_target_priv_data;
+ Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
return;
/**
* _scsih_sas_ir_physical_disk_event - PD event
* @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
-_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataIrPhysicalDisk_t *event_data)
+_scsih_sas_ir_physical_disk_event(struct MPT2SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
{
u16 handle;
u32 state;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t sas_device_pg0;
u32 ioc_status;
+ Mpi2EventDataIrPhysicalDisk_t *event_data = fw_event->event_data;
if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
return;
/**
* _scsih_sas_ir_operation_status_event - handle RAID operation events
* @ioc: per adapter object
- * @VF_ID:
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
-_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataIrOperationStatus_t *event_data)
+_scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc,
+ struct fw_event_work *fw_event)
{
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
- _scsih_sas_ir_operation_status_event_debug(ioc, event_data);
+ _scsih_sas_ir_operation_status_event_debug(ioc,
+ fw_event->event_data);
#endif
}
/**
* _scsih_task_set_full - handle task set full
* @ioc: per adapter object
- * @event_data: event data payload
+ * @fw_event: The fw_event_work object
* Context: user.
*
* Throttle back qdepth.
*/
static void
-_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
- Mpi2EventDataTaskSetFull_t *event_data)
+_scsih_task_set_full(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
+ *fw_event)
{
unsigned long flags;
struct _sas_device *sas_device;
u16 handle;
int id, channel;
u64 sas_address;
+ Mpi2EventDataTaskSetFull_t *event_data = fw_event->event_data;
current_depth = le16_to_cpu(event_data->CurrentDepth);
handle = le16_to_cpu(event_data->DevHandle);
if (sas_device->sas_address == sas_address &&
sas_device->slot == slot && sas_device->starget) {
sas_device->responding = 1;
+ sas_device->state = 0;
+ starget = sas_device->starget;
+ sas_target_priv_data = starget->hostdata;
+ sas_target_priv_data->tm_busy = 0;
starget_printk(KERN_INFO, sas_device->starget,
"handle(0x%04x), sas_addr(0x%016llx), enclosure "
"logical id(0x%016llx), slot(%d)\n", handle,
printk(KERN_INFO "\thandle changed from(0x%04x)!!!\n",
sas_device->handle);
sas_device->handle = handle;
- starget = sas_device->starget;
- sas_target_priv_data = starget->hostdata;
sas_target_priv_data->handle = handle;
goto out;
}
switch (fw_event->event) {
case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
- _scsih_sas_topology_change_event(ioc, fw_event->VF_ID,
- fw_event->event_data, fw_event);
+ _scsih_sas_topology_change_event(ioc, fw_event);
break;
case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
- _scsih_sas_device_status_change_event(ioc, fw_event->VF_ID,
- fw_event->event_data);
+ _scsih_sas_device_status_change_event(ioc,
+ fw_event);
break;
case MPI2_EVENT_SAS_DISCOVERY:
- _scsih_sas_discovery_event(ioc, fw_event->VF_ID,
- fw_event->event_data);
+ _scsih_sas_discovery_event(ioc,
+ fw_event);
break;
case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
- _scsih_sas_broadcast_primative_event(ioc, fw_event->VF_ID,
- fw_event->event_data);
+ _scsih_sas_broadcast_primative_event(ioc,
+ fw_event);
break;
case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
_scsih_sas_enclosure_dev_status_change_event(ioc,
- fw_event->VF_ID, fw_event->event_data);
+ fw_event);
break;
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
- _scsih_sas_ir_config_change_event(ioc, fw_event->VF_ID,
- fw_event->event_data);
+ _scsih_sas_ir_config_change_event(ioc, fw_event);
break;
case MPI2_EVENT_IR_VOLUME:
- _scsih_sas_ir_volume_event(ioc, fw_event->VF_ID,
- fw_event->event_data);
+ _scsih_sas_ir_volume_event(ioc, fw_event);
break;
case MPI2_EVENT_IR_PHYSICAL_DISK:
- _scsih_sas_ir_physical_disk_event(ioc, fw_event->VF_ID,
- fw_event->event_data);
+ _scsih_sas_ir_physical_disk_event(ioc, fw_event);
break;
case MPI2_EVENT_IR_OPERATION_STATUS:
- _scsih_sas_ir_operation_status_event(ioc, fw_event->VF_ID,
- fw_event->event_data);
+ _scsih_sas_ir_operation_status_event(ioc, fw_event);
break;
case MPI2_EVENT_TASK_SET_FULL:
- _scsih_task_set_full(ioc, fw_event->VF_ID,
- fw_event->event_data);
+ _scsih_task_set_full(ioc, fw_event);
break;
}
_scsih_fw_event_free(ioc, fw_event);
/**
* mpt2sas_scsih_event_callback - firmware event handler (called at ISR time)
* @ioc: per adapter object
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: interrupt.
*
* This function merely adds a new work task into ioc->firmware_event_thread.
* The tasks are worked from _firmware_event_work in user context.
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-void
-mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID, u32 reply)
+u8
+mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
+ u32 reply)
{
struct fw_event_work *fw_event;
Mpi2EventNotificationReply_t *mpi_reply;
spin_lock_irqsave(&ioc->fw_event_lock, flags);
if (ioc->fw_events_off || ioc->remove_host) {
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
- return;
+ return 1;
}
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
- mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
+ mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
event = le16_to_cpu(mpi_reply->Event);
switch (event) {
if (baen_data->Primitive !=
MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT ||
ioc->broadcast_aen_busy)
- return;
+ return 1;
ioc->broadcast_aen_busy = 1;
break;
}
break;
default: /* ignore the rest */
- return;
+ return 1;
}
fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
if (!fw_event) {
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
- return;
+ return 1;
}
fw_event->event_data =
kzalloc(mpi_reply->EventDataLength*4, GFP_ATOMIC);
printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
ioc->name, __FILE__, __LINE__, __func__);
kfree(fw_event);
- return;
+ return 1;
}
memcpy(fw_event->event_data, mpi_reply->EventData,
mpi_reply->EventDataLength*4);
fw_event->ioc = ioc;
- fw_event->VF_ID = VF_ID;
+ fw_event->VF_ID = mpi_reply->VF_ID;
+ fw_event->VP_ID = mpi_reply->VP_ID;
fw_event->event = event;
_scsih_fw_event_add(ioc, fw_event);
+ return 1;
}
/* shost template */
}
/**
- * _scsih_probe_sas - reporting raid volumes to sas transport
+ * _scsih_probe_sas - reporting sas devices to sas transport
* @ioc: per adapter object
*
* Called during initial loading of the driver.
ioc->base_cb_idx = base_cb_idx;
ioc->transport_cb_idx = transport_cb_idx;
ioc->config_cb_idx = config_cb_idx;
+ ioc->tm_tr_cb_idx = tm_tr_cb_idx;
+ ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
ioc->logging_level = logging_level;
/* misc semaphores and spin locks */
spin_lock_init(&ioc->ioc_reset_in_progress_lock);
INIT_LIST_HEAD(&ioc->fw_event_list);
INIT_LIST_HEAD(&ioc->raid_device_list);
INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
+ INIT_LIST_HEAD(&ioc->delayed_tr_list);
/* init shost parameters */
shost->max_cmd_len = 16;
scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
| SHOST_DIF_TYPE3_PROTECTION);
+ scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
/* event thread */
snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
/* ctl module callback handler */
ctl_cb_idx = mpt2sas_base_register_callback_handler(mpt2sas_ctl_done);
+ tm_tr_cb_idx = mpt2sas_base_register_callback_handler(
+ _scsih_tm_tr_complete);
+ tm_sas_control_cb_idx = mpt2sas_base_register_callback_handler(
+ _scsih_sas_control_complete);
+
mpt2sas_ctl_init();
error = pci_register_driver(&scsih_driver);
mpt2sas_base_release_callback_handler(config_cb_idx);
mpt2sas_base_release_callback_handler(ctl_cb_idx);
+ mpt2sas_base_release_callback_handler(tm_tr_cb_idx);
+ mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx);
+
mpt2sas_ctl_exit();
}
* SAS Transport Layer for MPT (Message Passing Technology) based controllers
*
* This code is based on drivers/scsi/mpt2sas/mpt2_transport.c
- * Copyright (C) 2007-2008 LSI Corporation
+ * Copyright (C) 2007-2009 LSI Corporation
* (mailto:DL-MPTFusionLinux@lsi.com)
*
* This program is free software; you can redistribute it and/or
* mpt2sas_transport_done - internal transport layer callback handler.
* @ioc: per adapter object
* @smid: system request message index
- * @VF_ID: virtual function id
+ * @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
*
* Callback handler when sending internal generated transport cmds.
* The callback index passed is `ioc->transport_cb_idx`
*
- * Return nothing.
+ * Return 1 meaning mf should be freed from _base_interrupt
+ * 0 means the mf is freed from this function.
*/
-void
-mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID,
+u8
+mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
mpi_reply = mpt2sas_base_get_reply_virt_addr(ioc, reply);
if (ioc->transport_cmds.status == MPT2_CMD_NOT_USED)
- return;
+ return 1;
if (ioc->transport_cmds.smid != smid)
- return;
+ return 1;
ioc->transport_cmds.status |= MPT2_CMD_COMPLETE;
if (mpi_reply) {
memcpy(ioc->transport_cmds.reply, mpi_reply,
}
ioc->transport_cmds.status &= ~MPT2_CMD_PENDING;
complete(&ioc->transport_cmds.done);
+ return 1;
}
/* report manufacture request structure */
memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
mpi_request->PhysicalPort = 0xFF;
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
sas_address_le = (u64 *)&mpi_request->SASAddress;
*sas_address_le = cpu_to_le64(sas_address);
mpi_request->RequestDataLength = sizeof(struct rep_manu_request);
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "report_manufacture - "
"send to sas_addr(0x%016llx)\n", ioc->name,
(unsigned long long)sas_address));
- mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->transport_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
10*HZ);
memset(mpi_request, 0, sizeof(Mpi2SmpPassthroughRequest_t));
mpi_request->Function = MPI2_FUNCTION_SMP_PASSTHROUGH;
mpi_request->PhysicalPort = 0xFF;
+ mpi_request->VF_ID = 0; /* TODO */
+ mpi_request->VP_ID = 0;
*((u64 *)&mpi_request->SASAddress) = (rphy) ?
cpu_to_le64(rphy->identify.sas_address) :
cpu_to_le64(ioc->sas_hba.sas_address);
dtransportprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s - "
"sending smp request\n", ioc->name, __func__));
- mpt2sas_base_put_smid_default(ioc, smid, 0 /* VF_ID */);
+ mpt2sas_base_put_smid_default(ioc, smid);
+ init_completion(&ioc->transport_cmds.done);
timeleft = wait_for_completion_timeout(&ioc->transport_cmds.done,
10*HZ);
#ifndef _MV_DEFS_H_
#define _MV_DEFS_H_
+#define PCI_DEVICE_ID_ARECA_1300 0x1300
+#define PCI_DEVICE_ID_ARECA_1320 0x1320
enum chip_flavors {
chip_6320,
chip_6485,
chip_9480,
chip_9180,
+ chip_1300,
+ chip_1320
};
/* driver compile-time configuration */
[chip_6485] = { 1, 8, 0x800, 33, 32, 10, &mvs_64xx_dispatch, },
[chip_9180] = { 2, 4, 0x800, 17, 64, 9, &mvs_94xx_dispatch, },
[chip_9480] = { 2, 4, 0x800, 17, 64, 9, &mvs_94xx_dispatch, },
+ [chip_1300] = { 1, 4, 0x400, 17, 16, 9, &mvs_64xx_dispatch, },
+ [chip_1320] = { 2, 4, 0x800, 17, 64, 9, &mvs_94xx_dispatch, },
};
#define SOC_SAS_NUM 2
{ PCI_VDEVICE(MARVELL, 0x6485), chip_6485 },
{ PCI_VDEVICE(MARVELL, 0x9480), chip_9480 },
{ PCI_VDEVICE(MARVELL, 0x9180), chip_9180 },
+ { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 },
+ { PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 },
{ } /* terminate list */
};
#include <linux/mutex.h>
#include <scsi/scsi.h>
#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_cmnd.h>
struct pmcraid_instance *pinstance = cmd->drv_inst;
unsigned long lock_flags;
- dev_err(&pinstance->pdev->dev,
+ dev_info(&pinstance->pdev->dev,
"Adapter being reset due to command timeout.\n");
/* Command timeouts result in hard reset sequence. The command that got
if (PMCRAID_IOASC_SENSE_KEY(ioasc) > 0) {
scsi_cmd->result |= (DID_ERROR << 16);
- pmcraid_err("command CDB[0] = %x failed with IOASC: 0x%08X\n",
- cmd->ioa_cb->ioarcb.cdb[0], ioasc);
+ scmd_printk(KERN_INFO, scsi_cmd,
+ "command CDB[0] = %x failed with IOASC: 0x%08X\n",
+ cmd->ioa_cb->ioarcb.cdb[0], ioasc);
}
/* if we had allocated sense buffers for request sense, copy the sense
if (pinstance->ldn.hcam->notification_lost ==
HOSTRCB_NOTIFICATIONS_LOST)
- dev_err(&pinstance->pdev->dev, "Error notifications lost\n");
+ dev_info(&pinstance->pdev->dev, "Error notifications lost\n");
ioasc = le32_to_cpu(hcam_ldn->error_log.fd_ioasc);
if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET ||
ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET_BY_OTHER) {
- dev_err(&pinstance->pdev->dev,
+ dev_info(&pinstance->pdev->dev,
"UnitAttention due to IOA Bus Reset\n");
scsi_report_bus_reset(
pinstance->host,
atomic_read(&pinstance->ccn.ignore) == 1) {
return;
} else if (ioasc) {
- dev_err(&pinstance->pdev->dev,
+ dev_info(&pinstance->pdev->dev,
"Host RCB (CCN) failed with IOASC: 0x%08X\n", ioasc);
spin_lock_irqsave(pinstance->host->host_lock, lock_flags);
pmcraid_send_hcam(pinstance, PMCRAID_HCAM_CODE_CONFIG_CHANGE);
return;
}
} else {
- dev_err(&pinstance->pdev->dev,
+ dev_info(&pinstance->pdev->dev,
"Host RCB(LDN) failed with IOASC: 0x%08X\n", ioasc);
}
/* send netlink message for HCAM notification if enabled */
scsi_dma_unmap(scsi_cmd);
pmcraid_return_cmd(cmd);
-
pmcraid_info("failing(%d) CDB[0] = %x result: %x\n",
le32_to_cpu(resp) >> 2,
cmd->ioa_cb->ioarcb.cdb[0],
res = scsi_cmd->device->hostdata;
if (!res) {
- pmcraid_err("reset_device: NULL resource pointer\n");
+ sdev_printk(KERN_ERR, scsi_cmd->device,
+ "reset_device: NULL resource pointer\n");
return FAILED;
}
pinstance =
(struct pmcraid_instance *)scsi_cmd->device->host->hostdata;
- dev_err(&pinstance->pdev->dev,
- "I/O command timed out, aborting it.\n");
+ scmd_printk(KERN_INFO, scsi_cmd,
+ "I/O command timed out, aborting it.\n");
res = scsi_cmd->device->hostdata;
*/
static int pmcraid_eh_device_reset_handler(struct scsi_cmnd *scmd)
{
- pmcraid_err("Doing device reset due to an I/O command timeout.\n");
+ scmd_printk(KERN_INFO, scmd,
+ "resetting device due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_INTERNAL_TIMEOUT,
RESET_DEVICE_LUN);
static int pmcraid_eh_bus_reset_handler(struct scsi_cmnd *scmd)
{
- pmcraid_err("Doing bus reset due to an I/O command timeout.\n");
+ scmd_printk(KERN_INFO, scmd,
+ "Doing bus reset due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_RESET_BUS_TIMEOUT,
RESET_DEVICE_BUS);
static int pmcraid_eh_target_reset_handler(struct scsi_cmnd *scmd)
{
- pmcraid_err("Doing target reset due to an I/O command timeout.\n");
+ scmd_printk(KERN_INFO, scmd,
+ "Doing target reset due to an I/O command timeout.\n");
return pmcraid_reset_device(scmd,
PMCRAID_INTERNAL_TIMEOUT,
RESET_DEVICE_TARGET);
nseg = scsi_dma_map(scsi_cmd);
if (nseg < 0) {
- dev_err(&pinstance->pdev->dev, "scsi_map_dma failed!\n");
+ scmd_printk(KERN_ERR, scsi_cmd, "scsi_map_dma failed!\n");
return -1;
} else if (nseg > PMCRAID_MAX_IOADLS) {
scsi_dma_unmap(scsi_cmd);
- dev_err(&pinstance->pdev->dev,
+ scmd_printk(KERN_ERR, scsi_cmd,
"sg count is (%d) more than allowed!\n", nseg);
return -1;
}
rc = pci_enable_device(pdev);
if (rc) {
- pmcraid_err("pmcraid: Enable device failed\n");
+ dev_err(&pdev->dev, "resume: Enable device failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc != 0) {
- dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
+ dev_err(&pdev->dev, "resume: Failed to set PCI DMA mask\n");
goto disable_device;
}
rc = pmcraid_register_interrupt_handler(pinstance);
if (rc) {
- pmcraid_err("resume: couldn't register interrupt handlers\n");
+ dev_err(&pdev->dev,
+ "resume: couldn't register interrupt handlers\n");
rc = -ENODEV;
goto release_host;
}
* state.
*/
if (pmcraid_reset_bringup(pinstance)) {
- pmcraid_err("couldn't initialize IOA \n");
+ dev_err(&pdev->dev, "couldn't initialize IOA \n");
rc = -ENODEV;
goto release_tasklets;
}
LIST_HEAD(old_res);
if (pinstance->cfg_table->flags & MICROCODE_UPDATE_REQUIRED)
- dev_err(&pinstance->pdev->dev, "Require microcode download\n");
+ pmcraid_err("IOA requires microcode download\n");
/* resource list is protected by pinstance->resource_lock.
* init_res_table can be called from probe (user-thread) or runtime
if (!found) {
if (list_empty(&pinstance->free_res_q)) {
- dev_err(&pinstance->pdev->dev,
- "Too many devices attached\n");
+ pmcraid_err("Too many devices attached\n");
break;
}
rc = pmcraid_register_interrupt_handler(pinstance);
if (rc) {
- pmcraid_err("couldn't register interrupt handler\n");
+ dev_err(&pdev->dev, "couldn't register interrupt handler\n");
goto out_scsi_host_put;
}
*/
pmcraid_info("starting IOA initialization sequence\n");
if (pmcraid_reset_bringup(pinstance)) {
- pmcraid_err("couldn't initialize IOA \n");
+ dev_err(&pdev->dev, "couldn't initialize IOA \n");
rc = 1;
goto out_release_bufs;
}
.shutdown = pmcraid_shutdown
};
-
/**
* pmcraid_init - module load entry point
*/
goto out_unreg_chrdev;
}
-
error = pmcraid_netlink_init();
if (error)
out_unreg_chrdev:
unregister_chrdev_region(MKDEV(pmcraid_major, 0), PMCRAID_MAX_ADAPTERS);
+
out_init:
return error;
}
#include <linux/completion.h>
#include <linux/list.h>
#include <scsi/scsi.h>
-#include <linux/kref.h>
#include <scsi/scsi_cmnd.h>
#include <linux/cdev.h>
#include <net/netlink.h>
if (req == NULL) {
qla_printk(KERN_WARNING, ha, "could not allocate memory"
"for request que\n");
- goto que_failed;
+ goto failed;
}
req->length = REQUEST_ENTRY_CNT_24XX;
que_failed:
qla25xx_free_req_que(base_vha, req);
+failed:
return 0;
}
if (rsp == NULL) {
qla_printk(KERN_WARNING, ha, "could not allocate memory for"
" response que\n");
- goto que_failed;
+ goto failed;
}
rsp->length = RESPONSE_ENTRY_CNT_MQ;
que_failed:
qla25xx_free_rsp_que(base_vha, rsp);
+failed:
return 0;
}
*/
struct scsi_cmnd *__scsi_get_command(struct Scsi_Host *shost, gfp_t gfp_mask)
{
- struct scsi_cmnd *cmd;
- unsigned char *buf;
-
- cmd = scsi_host_alloc_command(shost, gfp_mask);
+ struct scsi_cmnd *cmd = scsi_host_alloc_command(shost, gfp_mask);
if (unlikely(!cmd)) {
unsigned long flags;
spin_unlock_irqrestore(&shost->free_list_lock, flags);
if (cmd) {
+ void *buf, *prot;
+
buf = cmd->sense_buffer;
+ prot = cmd->prot_sdb;
+
memset(cmd, 0, sizeof(*cmd));
+
cmd->sense_buffer = buf;
+ cmd->prot_sdb = prot;
}
}
#include <scsi/scsi_host.h>
#include <scsi/scsicam.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_dbg.h>
#include "sd.h"
#include "scsi_logging.h"
#define PARAMETER_LIST_LENGTH_ERR 0x1a
#define INVALID_OPCODE 0x20
#define ADDR_OUT_OF_RANGE 0x21
+#define INVALID_COMMAND_OPCODE 0x20
#define INVALID_FIELD_IN_CDB 0x24
#define INVALID_FIELD_IN_PARAM_LIST 0x26
#define POWERON_RESET 0x29
#define SDEBUG_SENSE_LEN 32
#define SCSI_DEBUG_CANQUEUE 255
-#define SCSI_DEBUG_MAX_CMD_LEN 16
+#define SCSI_DEBUG_MAX_CMD_LEN 32
struct sdebug_dev_info {
struct list_head dev_list;
}
static void get_data_transfer_info(unsigned char *cmd,
- unsigned long long *lba, unsigned int *num)
+ unsigned long long *lba, unsigned int *num,
+ u32 *ei_lba)
{
+ *ei_lba = 0;
+
switch (*cmd) {
+ case VARIABLE_LENGTH_CMD:
+ *lba = (u64)cmd[19] | (u64)cmd[18] << 8 |
+ (u64)cmd[17] << 16 | (u64)cmd[16] << 24 |
+ (u64)cmd[15] << 32 | (u64)cmd[14] << 40 |
+ (u64)cmd[13] << 48 | (u64)cmd[12] << 56;
+
+ *ei_lba = (u32)cmd[23] | (u32)cmd[22] << 8 |
+ (u32)cmd[21] << 16 | (u32)cmd[20] << 24;
+
+ *num = (u32)cmd[31] | (u32)cmd[30] << 8 | (u32)cmd[29] << 16 |
+ (u32)cmd[28] << 24;
+ break;
+
case WRITE_16:
case READ_16:
*lba = (u64)cmd[9] | (u64)cmd[8] << 8 |
}
static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
- unsigned int sectors)
+ unsigned int sectors, u32 ei_lba)
{
unsigned int i, resid;
struct scatterlist *psgl;
return 0x01;
}
- if (scsi_debug_dif != SD_DIF_TYPE3_PROTECTION &&
+ if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
be32_to_cpu(sdt[i].ref_tag) != (sector & 0xffffffff)) {
printk(KERN_ERR "%s: REF check failed on sector %lu\n",
__func__, (unsigned long)sector);
dif_errors++;
return 0x03;
}
+
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+ be32_to_cpu(sdt[i].ref_tag) != ei_lba) {
+ printk(KERN_ERR "%s: REF check failed on sector %lu\n",
+ __func__, (unsigned long)sector);
+ dif_errors++;
+ return 0x03;
+ }
+
+ ei_lba++;
}
resid = sectors * 8; /* Bytes of protection data to copy into sgl */
}
static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba,
- unsigned int num, struct sdebug_dev_info *devip)
+ unsigned int num, struct sdebug_dev_info *devip,
+ u32 ei_lba)
{
unsigned long iflags;
int ret;
/* DIX + T10 DIF */
if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) {
- int prot_ret = prot_verify_read(SCpnt, lba, num);
+ int prot_ret = prot_verify_read(SCpnt, lba, num, ei_lba);
if (prot_ret) {
mk_sense_buffer(devip, ABORTED_COMMAND, 0x10, prot_ret);
}
static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
- unsigned int sectors)
+ unsigned int sectors, u32 ei_lba)
{
int i, j, ret;
struct sd_dif_tuple *sdt;
sector = do_div(tmp_sec, sdebug_store_sectors);
- if (((SCpnt->cmnd[1] >> 5) & 7) != 1) {
- printk(KERN_WARNING "scsi_debug: WRPROTECT != 1\n");
- return 0;
- }
-
BUG_ON(scsi_sg_count(SCpnt) == 0);
BUG_ON(scsi_prot_sg_count(SCpnt) == 0);
goto out;
}
- if (scsi_debug_dif != SD_DIF_TYPE3_PROTECTION &&
+ if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
be32_to_cpu(sdt->ref_tag)
!= (start_sec & 0xffffffff)) {
printk(KERN_ERR
goto out;
}
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+ be32_to_cpu(sdt->ref_tag) != ei_lba) {
+ printk(KERN_ERR
+ "%s: REF check failed on sector %lu\n",
+ __func__, (unsigned long)sector);
+ ret = 0x03;
+ dump_sector(daddr, scsi_debug_sector_size);
+ goto out;
+ }
+
/* Would be great to copy this in bigger
* chunks. However, for the sake of
* correctness we need to verify each sector
sector = 0; /* Force wrap */
start_sec++;
+ ei_lba++;
daddr += scsi_debug_sector_size;
ppage_offset += sizeof(struct sd_dif_tuple);
}
}
static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba,
- unsigned int num, struct sdebug_dev_info *devip)
+ unsigned int num, struct sdebug_dev_info *devip,
+ u32 ei_lba)
{
unsigned long iflags;
int ret;
/* DIX + T10 DIF */
if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) {
- int prot_ret = prot_verify_write(SCpnt, lba, num);
+ int prot_ret = prot_verify_write(SCpnt, lba, num, ei_lba);
if (prot_ret) {
mk_sense_buffer(devip, ILLEGAL_REQUEST, 0x10, prot_ret);
case SD_DIF_TYPE0_PROTECTION:
case SD_DIF_TYPE1_PROTECTION:
+ case SD_DIF_TYPE2_PROTECTION:
case SD_DIF_TYPE3_PROTECTION:
break;
default:
- printk(KERN_ERR "scsi_debug_init: dif must be 0, 1 or 3\n");
+ printk(KERN_ERR "scsi_debug_init: dif must be 0, 1, 2 or 3\n");
return -EINVAL;
}
int len, k;
unsigned int num;
unsigned long long lba;
+ u32 ei_lba;
int errsts = 0;
int target = SCpnt->device->id;
struct sdebug_dev_info *devip = NULL;
case READ_16:
case READ_12:
case READ_10:
+ /* READ{10,12,16} and DIF Type 2 are natural enemies */
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+ cmd[1] & 0xe0) {
+ mk_sense_buffer(devip, ILLEGAL_REQUEST,
+ INVALID_COMMAND_OPCODE, 0);
+ errsts = check_condition_result;
+ break;
+ }
+
+ if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
+ scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+ (cmd[1] & 0xe0) == 0)
+ printk(KERN_ERR "Unprotected RD/WR to DIF device\n");
+
+ /* fall through */
case READ_6:
+read:
errsts = check_readiness(SCpnt, 0, devip);
if (errsts)
break;
if (scsi_debug_fake_rw)
break;
- get_data_transfer_info(cmd, &lba, &num);
- errsts = resp_read(SCpnt, lba, num, devip);
+ get_data_transfer_info(cmd, &lba, &num, &ei_lba);
+ errsts = resp_read(SCpnt, lba, num, devip, ei_lba);
if (inj_recovered && (0 == errsts)) {
mk_sense_buffer(devip, RECOVERED_ERROR,
THRESHOLD_EXCEEDED, 0);
case WRITE_16:
case WRITE_12:
case WRITE_10:
+ /* WRITE{10,12,16} and DIF Type 2 are natural enemies */
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+ cmd[1] & 0xe0) {
+ mk_sense_buffer(devip, ILLEGAL_REQUEST,
+ INVALID_COMMAND_OPCODE, 0);
+ errsts = check_condition_result;
+ break;
+ }
+
+ if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
+ scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+ (cmd[1] & 0xe0) == 0)
+ printk(KERN_ERR "Unprotected RD/WR to DIF device\n");
+
+ /* fall through */
case WRITE_6:
+write:
errsts = check_readiness(SCpnt, 0, devip);
if (errsts)
break;
if (scsi_debug_fake_rw)
break;
- get_data_transfer_info(cmd, &lba, &num);
- errsts = resp_write(SCpnt, lba, num, devip);
+ get_data_transfer_info(cmd, &lba, &num, &ei_lba);
+ errsts = resp_write(SCpnt, lba, num, devip, ei_lba);
if (inj_recovered && (0 == errsts)) {
mk_sense_buffer(devip, RECOVERED_ERROR,
THRESHOLD_EXCEEDED, 0);
break;
if (scsi_debug_fake_rw)
break;
- get_data_transfer_info(cmd, &lba, &num);
- errsts = resp_read(SCpnt, lba, num, devip);
+ get_data_transfer_info(cmd, &lba, &num, &ei_lba);
+ errsts = resp_read(SCpnt, lba, num, devip, ei_lba);
if (errsts)
break;
- errsts = resp_write(SCpnt, lba, num, devip);
+ errsts = resp_write(SCpnt, lba, num, devip, ei_lba);
if (errsts)
break;
errsts = resp_xdwriteread(SCpnt, lba, num, devip);
break;
+ case VARIABLE_LENGTH_CMD:
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION) {
+
+ if ((cmd[10] & 0xe0) == 0)
+ printk(KERN_ERR
+ "Unprotected RD/WR to DIF device\n");
+
+ if (cmd[9] == READ_32) {
+ BUG_ON(SCpnt->cmd_len < 32);
+ goto read;
+ }
+
+ if (cmd[9] == WRITE_32) {
+ BUG_ON(SCpnt->cmd_len < 32);
+ goto write;
+ }
+ }
+
+ mk_sense_buffer(devip, ILLEGAL_REQUEST,
+ INVALID_FIELD_IN_CDB, 0);
+ errsts = check_condition_result;
+ break;
+
default:
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: Opcode: 0x%x not "
case NEEDS_RETRY:
case FAILED:
break;
+ case ADD_TO_MLQUEUE:
+ rtn = NEEDS_RETRY;
+ break;
default:
rtn = FAILED;
break;
out_device_destroy:
scsi_device_set_state(sdev, SDEV_DEL);
transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_dev);
put_device(&sdev->sdev_gendev);
out:
if (display_failure_msg)
if (sdev->host->hostt->slave_destroy)
sdev->host->hostt->slave_destroy(sdev);
transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_dev);
put_device(&sdev->sdev_gendev);
}
goto clean_device;
}
- /* take a reference for the sdev_dev; this is
- * released by the sdev_class .release */
- get_device(&sdev->sdev_gendev);
-
/* create queue files, which may be writable, depending on the host */
if (sdev->host->hostt->change_queue_depth)
error = device_create_file(&sdev->sdev_gendev, &sdev_attr_queue_depth_rw);
device_del(&sdev->sdev_gendev);
transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_dev);
put_device(&sdev->sdev_gendev);
return error;
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
device_initialize(&sdev->sdev_dev);
- sdev->sdev_dev.parent = &sdev->sdev_gendev;
+ sdev->sdev_dev.parent = get_device(&sdev->sdev_gendev);
sdev->sdev_dev.class = &sdev_class;
dev_set_name(&sdev->sdev_dev, "%d:%d:%d:%d",
sdev->host->host_no, sdev->channel, sdev->id, sdev->lun);
/**
* fc_bsg_host_dispatch - process fc host bsg requests and dispatch to LLDD
+ * @q: fc host request queue
* @shost: scsi host rport attached to
* @job: bsg job to be processed
*/
/**
* fc_bsg_rport_dispatch - process rport bsg requests and dispatch to LLDD
+ * @q: rport request queue
* @shost: scsi host rport attached to
* @rport: rport request destined to
* @job: bsg job to be processed
* object after last put) */
static DEFINE_MUTEX(sd_ref_mutex);
+struct kmem_cache *sd_cdb_cache;
+mempool_t *sd_cdb_pool;
+
static const char *sd_cache_types[] = {
"write through", "none", "write back",
"write back, no read (daft)"
mutex_unlock(&sd_ref_mutex);
}
+static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
+{
+ unsigned int prot_op = SCSI_PROT_NORMAL;
+ unsigned int dix = scsi_prot_sg_count(scmd);
+
+ if (scmd->sc_data_direction == DMA_FROM_DEVICE) {
+ if (dif && dix)
+ prot_op = SCSI_PROT_READ_PASS;
+ else if (dif && !dix)
+ prot_op = SCSI_PROT_READ_STRIP;
+ else if (!dif && dix)
+ prot_op = SCSI_PROT_READ_INSERT;
+ } else {
+ if (dif && dix)
+ prot_op = SCSI_PROT_WRITE_PASS;
+ else if (dif && !dix)
+ prot_op = SCSI_PROT_WRITE_INSERT;
+ else if (!dif && dix)
+ prot_op = SCSI_PROT_WRITE_STRIP;
+ }
+
+ scsi_set_prot_op(scmd, prot_op);
+ scsi_set_prot_type(scmd, dif);
+}
+
/**
* sd_init_command - build a scsi (read or write) command from
* information in the request structure.
sector_t threshold;
unsigned int this_count = blk_rq_sectors(rq);
int ret, host_dif;
+ unsigned char protect;
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
ret = scsi_setup_blk_pc_cmnd(sdp, rq);
/* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
if (host_dif)
- SCpnt->cmnd[1] = 1 << 5;
+ protect = 1 << 5;
else
- SCpnt->cmnd[1] = 0;
+ protect = 0;
- if (block > 0xffffffff) {
+ if (host_dif == SD_DIF_TYPE2_PROTECTION) {
+ SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
+
+ if (unlikely(SCpnt->cmnd == NULL)) {
+ ret = BLKPREP_DEFER;
+ goto out;
+ }
+
+ SCpnt->cmd_len = SD_EXT_CDB_SIZE;
+ memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
+ SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
+ SCpnt->cmnd[7] = 0x18;
+ SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
+ SCpnt->cmnd[10] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
+
+ /* LBA */
+ SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
+ SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
+ SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
+ SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
+ SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
+ SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
+ SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
+ SCpnt->cmnd[19] = (unsigned char) block & 0xff;
+
+ /* Expected Indirect LBA */
+ SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
+ SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
+ SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
+ SCpnt->cmnd[23] = (unsigned char) block & 0xff;
+
+ /* Transfer length */
+ SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
+ SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
+ SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
+ SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
+ } else if (block > 0xffffffff) {
SCpnt->cmnd[0] += READ_16 - READ_6;
- SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
+ SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
this_count = 0xffff;
SCpnt->cmnd[0] += READ_10 - READ_6;
- SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
+ SCpnt->cmnd[1] = protect | (blk_fua_rq(rq) ? 0x8 : 0);
SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
/* If DIF or DIX is enabled, tell HBA how to handle request */
if (host_dif || scsi_prot_sg_count(SCpnt))
- sd_dif_op(SCpnt, host_dif, scsi_prot_sg_count(SCpnt),
- sdkp->protection_type);
+ sd_prot_op(SCpnt, host_dif);
/*
* We shouldn't disconnect in the middle of a sector, so with a dumb
int result = SCpnt->result;
unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
struct scsi_sense_hdr sshdr;
+ struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
int sense_valid = 0;
int sense_deferred = 0;
if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
sd_dif_complete(SCpnt, good_bytes);
+ if (scsi_host_dif_capable(sdkp->device->host, sdkp->protection_type)
+ == SD_DIF_TYPE2_PROTECTION && SCpnt->cmnd != SCpnt->request->cmd)
+ mempool_free(SCpnt->cmnd, sd_cdb_pool);
+
return good_bytes;
}
u8 type;
if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
- type = 0;
- else
- type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
+ return;
- sdkp->protection_type = type;
+ type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
- switch (type) {
- case SD_DIF_TYPE0_PROTECTION:
- case SD_DIF_TYPE1_PROTECTION:
- case SD_DIF_TYPE3_PROTECTION:
- break;
+ if (type == sdkp->protection_type || !sdkp->first_scan)
+ return;
- case SD_DIF_TYPE2_PROTECTION:
- sd_printk(KERN_ERR, sdkp, "formatted with DIF Type 2 " \
- "protection which is currently unsupported. " \
- "Disabling disk!\n");
- goto disable;
+ sdkp->protection_type = type;
- default:
- sd_printk(KERN_ERR, sdkp, "formatted with unknown " \
- "protection type %d. Disabling disk!\n", type);
- goto disable;
+ if (type > SD_DIF_TYPE3_PROTECTION) {
+ sd_printk(KERN_ERR, sdkp, "formatted with unsupported " \
+ "protection type %u. Disabling disk!\n", type);
+ sdkp->capacity = 0;
+ return;
}
- return;
-
-disable:
- sdkp->capacity = 0;
+ if (scsi_host_dif_capable(sdp->host, type))
+ sd_printk(KERN_NOTICE, sdkp,
+ "Enabling DIF Type %u protection\n", type);
+ else
+ sd_printk(KERN_NOTICE, sdkp,
+ "Disabling DIF Type %u protection\n", type);
}
static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
if (err)
goto err_out_class;
+ sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
+ 0, 0, NULL);
+ if (!sd_cdb_cache) {
+ printk(KERN_ERR "sd: can't init extended cdb cache\n");
+ goto err_out_class;
+ }
+
+ sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
+ if (!sd_cdb_pool) {
+ printk(KERN_ERR "sd: can't init extended cdb pool\n");
+ goto err_out_cache;
+ }
+
return 0;
+err_out_cache:
+ kmem_cache_destroy(sd_cdb_cache);
+
err_out_class:
class_unregister(&sd_disk_class);
err_out:
SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
+ mempool_destroy(sd_cdb_pool);
+ kmem_cache_destroy(sd_cdb_cache);
+
scsi_unregister_driver(&sd_template.gendrv);
class_unregister(&sd_disk_class);
*/
#define SD_LAST_BUGGY_SECTORS 8
+enum {
+ SD_EXT_CDB_SIZE = 32, /* Extended CDB size */
+ SD_MEMPOOL_SIZE = 2, /* CDB pool size */
+};
+
struct scsi_disk {
struct scsi_driver *driver; /* always &sd_template */
struct scsi_device *device;
#ifdef CONFIG_BLK_DEV_INTEGRITY
-extern void sd_dif_op(struct scsi_cmnd *, unsigned int, unsigned int, unsigned int);
extern void sd_dif_config_host(struct scsi_disk *);
extern int sd_dif_prepare(struct request *rq, sector_t, unsigned int);
extern void sd_dif_complete(struct scsi_cmnd *, unsigned int);
#else /* CONFIG_BLK_DEV_INTEGRITY */
-static inline void sd_dif_op(struct scsi_cmnd *cmd, unsigned int a, unsigned int b, unsigned int c)
-{
-}
static inline void sd_dif_config_host(struct scsi_disk *disk)
{
}
dif = 0; dix = 1;
}
- if (type) {
- if (dif)
- sd_printk(KERN_NOTICE, sdkp,
- "Enabling DIF Type %d protection\n", type);
- else
- sd_printk(KERN_NOTICE, sdkp,
- "Disabling DIF Type %d protection\n", type);
- }
-
if (!dix)
return;
}
}
-/*
- * DIF DMA operation magic decoder ring.
- */
-void sd_dif_op(struct scsi_cmnd *scmd, unsigned int dif, unsigned int dix, unsigned int type)
-{
- int csum_convert, prot_op;
-
- prot_op = 0;
-
- /* Convert checksum? */
- if (scsi_host_get_guard(scmd->device->host) != SHOST_DIX_GUARD_CRC)
- csum_convert = 1;
- else
- csum_convert = 0;
-
- BUG_ON(dif && (scmd->cmnd[0] == READ_6 || scmd->cmnd[0] == WRITE_6));
-
- switch (scmd->cmnd[0]) {
- case READ_6:
- case READ_10:
- case READ_12:
- case READ_16:
- if (dif && dix)
- if (csum_convert)
- prot_op = SCSI_PROT_READ_CONVERT;
- else
- prot_op = SCSI_PROT_READ_PASS;
- else if (dif && !dix)
- prot_op = SCSI_PROT_READ_STRIP;
- else if (!dif && dix)
- prot_op = SCSI_PROT_READ_INSERT;
-
- break;
-
- case WRITE_6:
- case WRITE_10:
- case WRITE_12:
- case WRITE_16:
- if (dif && dix)
- if (csum_convert)
- prot_op = SCSI_PROT_WRITE_CONVERT;
- else
- prot_op = SCSI_PROT_WRITE_PASS;
- else if (dif && !dix)
- prot_op = SCSI_PROT_WRITE_INSERT;
- else if (!dif && dix)
- prot_op = SCSI_PROT_WRITE_STRIP;
-
- break;
- }
-
- scsi_set_prot_op(scmd, prot_op);
- if (dif)
- scsi_set_prot_type(scmd, type);
-}
-
/*
* The virtual start sector is the one that was originally submitted
* by the block layer. Due to partitioning, MD/DM cloning, etc. the
return VM_FAULT_SIGBUS;
}
-static struct vm_operations_struct sg_mmap_vm_ops = {
+static const struct vm_operations_struct sg_mmap_vm_ops = {
.fault = sg_vma_fault,
};
}
}
-static struct file_operations sg_fops = {
+static const struct file_operations sg_fops = {
.owner = THIS_MODULE,
.read = sg_read,
.write = sg_write,
Sg_scatter_hold *req_schp = &srp->data;
SCSI_LOG_TIMEOUT(4, printk("sg_finish_rem_req: res_used=%d\n", (int) srp->res_used));
- if (srp->res_used)
- sg_unlink_reserve(sfp, srp);
- else
- sg_remove_scat(req_schp);
-
if (srp->rq) {
if (srp->bio)
ret = blk_rq_unmap_user(srp->bio);
blk_put_request(srp->rq);
}
+ if (srp->res_used)
+ sg_unlink_reserve(sfp, srp);
+ else
+ sg_remove_scat(req_schp);
+
sg_remove_request(sfp, srp);
return ret;
static int sg_proc_single_open_adio(struct inode *inode, struct file *file);
static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer,
size_t count, loff_t *off);
-static struct file_operations adio_fops = {
- /* .owner, .read and .llseek added in sg_proc_init() */
+static const struct file_operations adio_fops = {
+ .owner = THIS_MODULE,
.open = sg_proc_single_open_adio,
+ .read = seq_read,
+ .llseek = seq_lseek,
.write = sg_proc_write_adio,
.release = single_release,
};
static int sg_proc_single_open_dressz(struct inode *inode, struct file *file);
static ssize_t sg_proc_write_dressz(struct file *filp,
const char __user *buffer, size_t count, loff_t *off);
-static struct file_operations dressz_fops = {
+static const struct file_operations dressz_fops = {
+ .owner = THIS_MODULE,
.open = sg_proc_single_open_dressz,
+ .read = seq_read,
+ .llseek = seq_lseek,
.write = sg_proc_write_dressz,
.release = single_release,
};
static int sg_proc_seq_show_version(struct seq_file *s, void *v);
static int sg_proc_single_open_version(struct inode *inode, struct file *file);
-static struct file_operations version_fops = {
+static const struct file_operations version_fops = {
+ .owner = THIS_MODULE,
.open = sg_proc_single_open_version,
+ .read = seq_read,
+ .llseek = seq_lseek,
.release = single_release,
};
static int sg_proc_seq_show_devhdr(struct seq_file *s, void *v);
static int sg_proc_single_open_devhdr(struct inode *inode, struct file *file);
-static struct file_operations devhdr_fops = {
+static const struct file_operations devhdr_fops = {
+ .owner = THIS_MODULE,
.open = sg_proc_single_open_devhdr,
+ .read = seq_read,
+ .llseek = seq_lseek,
.release = single_release,
};
static void * dev_seq_start(struct seq_file *s, loff_t *pos);
static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos);
static void dev_seq_stop(struct seq_file *s, void *v);
-static struct file_operations dev_fops = {
+static const struct file_operations dev_fops = {
+ .owner = THIS_MODULE,
.open = sg_proc_open_dev,
+ .read = seq_read,
+ .llseek = seq_lseek,
.release = seq_release,
};
static const struct seq_operations dev_seq_ops = {
static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v);
static int sg_proc_open_devstrs(struct inode *inode, struct file *file);
-static struct file_operations devstrs_fops = {
+static const struct file_operations devstrs_fops = {
+ .owner = THIS_MODULE,
.open = sg_proc_open_devstrs,
+ .read = seq_read,
+ .llseek = seq_lseek,
.release = seq_release,
};
static const struct seq_operations devstrs_seq_ops = {
static int sg_proc_seq_show_debug(struct seq_file *s, void *v);
static int sg_proc_open_debug(struct inode *inode, struct file *file);
-static struct file_operations debug_fops = {
+static const struct file_operations debug_fops = {
+ .owner = THIS_MODULE,
.open = sg_proc_open_debug,
+ .read = seq_read,
+ .llseek = seq_lseek,
.release = seq_release,
};
static const struct seq_operations debug_seq_ops = {
struct sg_proc_leaf {
const char * name;
- struct file_operations * fops;
+ const struct file_operations * fops;
};
static struct sg_proc_leaf sg_proc_leaf_arr[] = {
for (k = 0; k < num_leaves; ++k) {
leaf = &sg_proc_leaf_arr[k];
mask = leaf->fops->write ? S_IRUGO | S_IWUSR : S_IRUGO;
- leaf->fops->owner = THIS_MODULE;
- leaf->fops->read = seq_read;
- leaf->fops->llseek = seq_lseek;
proc_create(leaf->name, mask, sg_proc_sgp, leaf->fops);
}
return 0;
cd->capacity = 0x1fffff;
sector_size = 2048; /* A guess, just in case */
} else {
-#if 0
- if (cdrom_get_last_written(&cd->cdi,
- &cd->capacity))
-#endif
- cd->capacity = 1 + ((buffer[0] << 24) |
- (buffer[1] << 16) |
- (buffer[2] << 8) |
- buffer[3]);
+ long last_written;
+
+ cd->capacity = 1 + ((buffer[0] << 24) | (buffer[1] << 16) |
+ (buffer[2] << 8) | buffer[3]);
+ /*
+ * READ_CAPACITY doesn't return the correct size on
+ * certain UDF media. If last_written is larger, use
+ * it instead.
+ *
+ * http://bugzilla.kernel.org/show_bug.cgi?id=9668
+ */
+ if (!cdrom_get_last_written(&cd->cdi, &last_written))
+ cd->capacity = max_t(long, cd->capacity, last_written);
+
sector_size = (buffer[4] << 24) |
(buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
switch (sector_size) {
ioctl_result = st_int_ioctl(STp, MTBSF, 1);
if (cmd_in == MTSETBLK || cmd_in == SET_DENS_AND_BLK) {
- int old_block_size = STp->block_size;
STp->block_size = arg & MT_ST_BLKSIZE_MASK;
if (STp->block_size != 0) {
- if (old_block_size == 0)
- normalize_buffer(STp->buffer);
(STp->buffer)->buffer_blocks =
(STp->buffer)->buffer_size / STp->block_size;
}
return (serial8250_reg.minor - 64) + port->line;
}
+static unsigned int skip_txen_test; /* force skip of txen test at init time */
+
/*
* Debugging.
*/
is variable. So, let's just don't test if we receive
TX irq. This way, we'll never enable UART_BUG_TXEN.
*/
- if (up->port.flags & UPF_NO_TXEN_TEST)
+ if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST)
goto dont_test_tx_en;
/*
module_param(nr_uarts, uint, 0644);
MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
+module_param(skip_txen_test, uint, 0644);
+MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
+
#ifdef CONFIG_SERIAL_8250_RSA
module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
pbn_exar_XR17C152,
pbn_exar_XR17C154,
pbn_exar_XR17C158,
+ pbn_exar_ibm_saturn,
pbn_pasemi_1682M,
pbn_ni8430_2,
pbn_ni8430_4,
pbn_ni8430_8,
pbn_ni8430_16,
+ pbn_ADDIDATA_PCIe_1_3906250,
+ pbn_ADDIDATA_PCIe_2_3906250,
+ pbn_ADDIDATA_PCIe_4_3906250,
+ pbn_ADDIDATA_PCIe_8_3906250,
};
/*
.base_baud = 921600,
.uart_offset = 0x200,
},
+ [pbn_exar_ibm_saturn] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 921600,
+ .uart_offset = 0x200,
+ },
+
/*
* PA Semi PWRficient PA6T-1682M on-chip UART
*/
.uart_offset = 0x10,
.first_offset = 0x800,
},
+ /*
+ * ADDI-DATA GmbH PCI-Express communication cards <info@addi-data.com>
+ */
+ [pbn_ADDIDATA_PCIe_1_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_2_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 2,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_4_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 4,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
+ [pbn_ADDIDATA_PCIe_8_3906250] = {
+ .flags = FL_BASE0,
+ .num_ports = 8,
+ .base_baud = 3906250,
+ .uart_offset = 0x200,
+ .first_offset = 0x1000,
+ },
};
static const struct pci_device_id softmodem_blacklist[] = {
PCI_SUBVENDOR_ID_CONNECT_TECH,
PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485, 0, 0,
pbn_b0_8_1843200_200 },
+ { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17C152,
+ PCI_VENDOR_ID_IBM, PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT,
+ 0, 0, pbn_exar_ibm_saturn },
{ PCI_VENDOR_ID_SEALEVEL, PCI_DEVICE_ID_SEALEVEL_U530,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
0,
pbn_b0_8_115200 },
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7500,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_4_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7420,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_2_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7300,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_1_3906250 },
+
+ { PCI_VENDOR_ID_ADDIDATA,
+ PCI_DEVICE_ID_ADDIDATA_APCIe7800,
+ PCI_ANY_ID,
+ PCI_ANY_ID,
+ 0,
+ 0,
+ pbn_ADDIDATA_PCIe_8_3906250 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
config SERIAL_UARTLITE
tristate "Xilinx uartlite serial port support"
- depends on PPC32 || MICROBLAZE
+ depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE
select SERIAL_CORE
help
Say Y here if you want to use the Xilinx uartlite serial controller.
---help---
Add support for UART controller on timberdale.
+config SERIAL_BCM63XX
+ tristate "bcm63xx serial port support"
+ select SERIAL_CORE
+ depends on BCM63XX
+ help
+ If you have a bcm63xx CPU, you can enable its onboard
+ serial port by enabling this options.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bcm963xx_uart.
+
+config SERIAL_BCM63XX_CONSOLE
+ bool "Console on bcm63xx serial port"
+ depends on SERIAL_BCM63XX=y
+ select SERIAL_CORE_CONSOLE
+ help
+ If you have enabled the serial port on the bcm63xx CPU
+ you can make it the console by answering Y to this option.
+
endmenu
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
void *data;
int ret;
- BUILD_BUG_ON(!is_power_of_2(ATMEL_SERIAL_RINGSIZE));
+ BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
port = &atmel_ports[pdev->id];
port->backup_imr = 0;
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from many drivers using generic_serial interface.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ *
+ * Serial driver for BCM63xx integrated UART.
+ *
+ * Hardware flow control was _not_ tested since I only have RX/TX on
+ * my board.
+ */
+
+#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <bcm63xx_clk.h>
+#include <bcm63xx_irq.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+#define BCM63XX_NR_UARTS 1
+
+static struct uart_port ports[BCM63XX_NR_UARTS];
+
+/*
+ * rx interrupt mask / stat
+ *
+ * mask:
+ * - rx fifo full
+ * - rx fifo above threshold
+ * - rx fifo not empty for too long
+ */
+#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \
+ UART_IR_MASK(UART_IR_RXTHRESH) | \
+ UART_IR_MASK(UART_IR_RXTIMEOUT))
+
+#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \
+ UART_IR_STAT(UART_IR_RXTHRESH) | \
+ UART_IR_STAT(UART_IR_RXTIMEOUT))
+
+/*
+ * tx interrupt mask / stat
+ *
+ * mask:
+ * - tx fifo empty
+ * - tx fifo below threshold
+ */
+#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \
+ UART_IR_MASK(UART_IR_TXTRESH))
+
+#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \
+ UART_IR_STAT(UART_IR_TXTRESH))
+
+/*
+ * external input interrupt
+ *
+ * mask: any edge on CTS, DCD
+ */
+#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
+ UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
+
+/*
+ * handy uart register accessor
+ */
+static inline unsigned int bcm_uart_readl(struct uart_port *port,
+ unsigned int offset)
+{
+ return bcm_readl(port->membase + offset);
+}
+
+static inline void bcm_uart_writel(struct uart_port *port,
+ unsigned int value, unsigned int offset)
+{
+ bcm_writel(value, port->membase + offset);
+}
+
+/*
+ * serial core request to check if uart tx fifo is empty
+ */
+static unsigned int bcm_uart_tx_empty(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_IR_REG);
+ return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
+}
+
+/*
+ * serial core request to set RTS and DTR pin state and loopback mode
+ */
+static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_MCTL_REG);
+ val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
+ /* invert of written value is reflected on the pin */
+ if (!(mctrl & TIOCM_DTR))
+ val |= UART_MCTL_DTR_MASK;
+ if (!(mctrl & TIOCM_RTS))
+ val |= UART_MCTL_RTS_MASK;
+ bcm_uart_writel(port, val, UART_MCTL_REG);
+
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ if (mctrl & TIOCM_LOOP)
+ val |= UART_CTL_LOOPBACK_MASK;
+ else
+ val &= ~UART_CTL_LOOPBACK_MASK;
+ bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to return RI, CTS, DCD and DSR pin state
+ */
+static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
+{
+ unsigned int val, mctrl;
+
+ mctrl = 0;
+ val = bcm_uart_readl(port, UART_EXTINP_REG);
+ if (val & UART_EXTINP_RI_MASK)
+ mctrl |= TIOCM_RI;
+ if (val & UART_EXTINP_CTS_MASK)
+ mctrl |= TIOCM_CTS;
+ if (val & UART_EXTINP_DCD_MASK)
+ mctrl |= TIOCM_CD;
+ if (val & UART_EXTINP_DSR_MASK)
+ mctrl |= TIOCM_DSR;
+ return mctrl;
+}
+
+/*
+ * serial core request to disable tx ASAP (used for flow control)
+ */
+static void bcm_uart_stop_tx(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ val &= ~(UART_CTL_TXEN_MASK);
+ bcm_uart_writel(port, val, UART_CTL_REG);
+
+ val = bcm_uart_readl(port, UART_IR_REG);
+ val &= ~UART_TX_INT_MASK;
+ bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to (re)enable tx
+ */
+static void bcm_uart_start_tx(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_IR_REG);
+ val |= UART_TX_INT_MASK;
+ bcm_uart_writel(port, val, UART_IR_REG);
+
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ val |= UART_CTL_TXEN_MASK;
+ bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to stop rx, called before port shutdown
+ */
+static void bcm_uart_stop_rx(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_IR_REG);
+ val &= ~UART_RX_INT_MASK;
+ bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to enable modem status interrupt reporting
+ */
+static void bcm_uart_enable_ms(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_IR_REG);
+ val |= UART_IR_MASK(UART_IR_EXTIP);
+ bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to start/stop emitting break char
+ */
+static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
+{
+ unsigned long flags;
+ unsigned int val;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ if (ctl)
+ val |= UART_CTL_XMITBRK_MASK;
+ else
+ val &= ~UART_CTL_XMITBRK_MASK;
+ bcm_uart_writel(port, val, UART_CTL_REG);
+
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * return port type in string format
+ */
+static const char *bcm_uart_type(struct uart_port *port)
+{
+ return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
+}
+
+/*
+ * read all chars in rx fifo and send them to core
+ */
+static void bcm_uart_do_rx(struct uart_port *port)
+{
+ struct tty_struct *tty;
+ unsigned int max_count;
+
+ /* limit number of char read in interrupt, should not be
+ * higher than fifo size anyway since we're much faster than
+ * serial port */
+ max_count = 32;
+ tty = port->info->port.tty;
+ do {
+ unsigned int iestat, c, cstat;
+ char flag;
+
+ /* get overrun/fifo empty information from ier
+ * register */
+ iestat = bcm_uart_readl(port, UART_IR_REG);
+ if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
+ break;
+
+ cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
+ port->icount.rx++;
+ flag = TTY_NORMAL;
+ c &= 0xff;
+
+ if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
+ /* do stats first */
+ if (cstat & UART_FIFO_BRKDET_MASK) {
+ port->icount.brk++;
+ if (uart_handle_break(port))
+ continue;
+ }
+
+ if (cstat & UART_FIFO_PARERR_MASK)
+ port->icount.parity++;
+ if (cstat & UART_FIFO_FRAMEERR_MASK)
+ port->icount.frame++;
+
+ /* update flag wrt read_status_mask */
+ cstat &= port->read_status_mask;
+ if (cstat & UART_FIFO_BRKDET_MASK)
+ flag = TTY_BREAK;
+ if (cstat & UART_FIFO_FRAMEERR_MASK)
+ flag = TTY_FRAME;
+ if (cstat & UART_FIFO_PARERR_MASK)
+ flag = TTY_PARITY;
+ }
+
+ if (uart_handle_sysrq_char(port, c))
+ continue;
+
+ if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
+ port->icount.overrun++;
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+
+ if ((cstat & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, c, flag);
+
+ } while (--max_count);
+
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * fill tx fifo with chars to send, stop when fifo is about to be full
+ * or when all chars have been sent.
+ */
+static void bcm_uart_do_tx(struct uart_port *port)
+{
+ struct circ_buf *xmit;
+ unsigned int val, max_count;
+
+ if (port->x_char) {
+ bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
+ port->icount.tx++;
+ port->x_char = 0;
+ return;
+ }
+
+ if (uart_tx_stopped(port)) {
+ bcm_uart_stop_tx(port);
+ return;
+ }
+
+ xmit = &port->info->xmit;
+ if (uart_circ_empty(xmit))
+ goto txq_empty;
+
+ val = bcm_uart_readl(port, UART_MCTL_REG);
+ val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
+ max_count = port->fifosize - val;
+
+ while (max_count--) {
+ unsigned int c;
+
+ c = xmit->buf[xmit->tail];
+ bcm_uart_writel(port, c, UART_FIFO_REG);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+
+ if (uart_circ_empty(xmit))
+ goto txq_empty;
+ return;
+
+txq_empty:
+ /* nothing to send, disable transmit interrupt */
+ val = bcm_uart_readl(port, UART_IR_REG);
+ val &= ~UART_TX_INT_MASK;
+ bcm_uart_writel(port, val, UART_IR_REG);
+ return;
+}
+
+/*
+ * process uart interrupt
+ */
+static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
+{
+ struct uart_port *port;
+ unsigned int irqstat;
+
+ port = dev_id;
+ spin_lock(&port->lock);
+
+ irqstat = bcm_uart_readl(port, UART_IR_REG);
+ if (irqstat & UART_RX_INT_STAT)
+ bcm_uart_do_rx(port);
+
+ if (irqstat & UART_TX_INT_STAT)
+ bcm_uart_do_tx(port);
+
+ if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
+ unsigned int estat;
+
+ estat = bcm_uart_readl(port, UART_EXTINP_REG);
+ if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
+ uart_handle_cts_change(port,
+ estat & UART_EXTINP_CTS_MASK);
+ if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
+ uart_handle_dcd_change(port,
+ estat & UART_EXTINP_DCD_MASK);
+ }
+
+ spin_unlock(&port->lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * enable rx & tx operation on uart
+ */
+static void bcm_uart_enable(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
+ bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * disable rx & tx operation on uart
+ */
+static void bcm_uart_disable(struct uart_port *port)
+{
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
+ UART_CTL_RXEN_MASK);
+ bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * clear all unread data in rx fifo and unsent data in tx fifo
+ */
+static void bcm_uart_flush(struct uart_port *port)
+{
+ unsigned int val;
+
+ /* empty rx and tx fifo */
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
+ bcm_uart_writel(port, val, UART_CTL_REG);
+
+ /* read any pending char to make sure all irq status are
+ * cleared */
+ (void)bcm_uart_readl(port, UART_FIFO_REG);
+}
+
+/*
+ * serial core request to initialize uart and start rx operation
+ */
+static int bcm_uart_startup(struct uart_port *port)
+{
+ unsigned int val;
+ int ret;
+
+ /* mask all irq and flush port */
+ bcm_uart_disable(port);
+ bcm_uart_writel(port, 0, UART_IR_REG);
+ bcm_uart_flush(port);
+
+ /* clear any pending external input interrupt */
+ (void)bcm_uart_readl(port, UART_EXTINP_REG);
+
+ /* set rx/tx fifo thresh to fifo half size */
+ val = bcm_uart_readl(port, UART_MCTL_REG);
+ val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
+ val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
+ val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
+ bcm_uart_writel(port, val, UART_MCTL_REG);
+
+ /* set rx fifo timeout to 1 char time */
+ val = bcm_uart_readl(port, UART_CTL_REG);
+ val &= ~UART_CTL_RXTMOUTCNT_MASK;
+ val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
+ bcm_uart_writel(port, val, UART_CTL_REG);
+
+ /* report any edge on dcd and cts */
+ val = UART_EXTINP_INT_MASK;
+ val |= UART_EXTINP_DCD_NOSENSE_MASK;
+ val |= UART_EXTINP_CTS_NOSENSE_MASK;
+ bcm_uart_writel(port, val, UART_EXTINP_REG);
+
+ /* register irq and enable rx interrupts */
+ ret = request_irq(port->irq, bcm_uart_interrupt, 0,
+ bcm_uart_type(port), port);
+ if (ret)
+ return ret;
+ bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
+ bcm_uart_enable(port);
+ return 0;
+}
+
+/*
+ * serial core request to flush & disable uart
+ */
+static void bcm_uart_shutdown(struct uart_port *port)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+ bcm_uart_writel(port, 0, UART_IR_REG);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ bcm_uart_disable(port);
+ bcm_uart_flush(port);
+ free_irq(port->irq, port);
+}
+
+/*
+ * serial core request to change current uart setting
+ */
+static void bcm_uart_set_termios(struct uart_port *port,
+ struct ktermios *new,
+ struct ktermios *old)
+{
+ unsigned int ctl, baud, quot, ier;
+ unsigned long flags;
+
+ spin_lock_irqsave(&port->lock, flags);
+
+ /* disable uart while changing speed */
+ bcm_uart_disable(port);
+ bcm_uart_flush(port);
+
+ /* update Control register */
+ ctl = bcm_uart_readl(port, UART_CTL_REG);
+ ctl &= ~UART_CTL_BITSPERSYM_MASK;
+
+ switch (new->c_cflag & CSIZE) {
+ case CS5:
+ ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
+ break;
+ case CS6:
+ ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
+ break;
+ case CS7:
+ ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
+ break;
+ default:
+ ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
+ break;
+ }
+
+ ctl &= ~UART_CTL_STOPBITS_MASK;
+ if (new->c_cflag & CSTOPB)
+ ctl |= UART_CTL_STOPBITS_2;
+ else
+ ctl |= UART_CTL_STOPBITS_1;
+
+ ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+ if (new->c_cflag & PARENB)
+ ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+ ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+ if (new->c_cflag & PARODD)
+ ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+ bcm_uart_writel(port, ctl, UART_CTL_REG);
+
+ /* update Baudword register */
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+ quot = uart_get_divisor(port, baud) - 1;
+ bcm_uart_writel(port, quot, UART_BAUD_REG);
+
+ /* update Interrupt register */
+ ier = bcm_uart_readl(port, UART_IR_REG);
+
+ ier &= ~UART_IR_MASK(UART_IR_EXTIP);
+ if (UART_ENABLE_MS(port, new->c_cflag))
+ ier |= UART_IR_MASK(UART_IR_EXTIP);
+
+ bcm_uart_writel(port, ier, UART_IR_REG);
+
+ /* update read/ignore mask */
+ port->read_status_mask = UART_FIFO_VALID_MASK;
+ if (new->c_iflag & INPCK) {
+ port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
+ port->read_status_mask |= UART_FIFO_PARERR_MASK;
+ }
+ if (new->c_iflag & (BRKINT))
+ port->read_status_mask |= UART_FIFO_BRKDET_MASK;
+
+ port->ignore_status_mask = 0;
+ if (new->c_iflag & IGNPAR)
+ port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
+ if (new->c_iflag & IGNBRK)
+ port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
+ if (!(new->c_cflag & CREAD))
+ port->ignore_status_mask |= UART_FIFO_VALID_MASK;
+
+ uart_update_timeout(port, new->c_cflag, baud);
+ bcm_uart_enable(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * serial core request to claim uart iomem
+ */
+static int bcm_uart_request_port(struct uart_port *port)
+{
+ unsigned int size;
+
+ size = RSET_UART_SIZE;
+ if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
+ dev_err(port->dev, "Memory region busy\n");
+ return -EBUSY;
+ }
+
+ port->membase = ioremap(port->mapbase, size);
+ if (!port->membase) {
+ dev_err(port->dev, "Unable to map registers\n");
+ release_mem_region(port->mapbase, size);
+ return -EBUSY;
+ }
+ return 0;
+}
+
+/*
+ * serial core request to release uart iomem
+ */
+static void bcm_uart_release_port(struct uart_port *port)
+{
+ release_mem_region(port->mapbase, RSET_UART_SIZE);
+ iounmap(port->membase);
+}
+
+/*
+ * serial core request to do any port required autoconfiguration
+ */
+static void bcm_uart_config_port(struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ if (bcm_uart_request_port(port))
+ return;
+ port->type = PORT_BCM63XX;
+ }
+}
+
+/*
+ * serial core request to check that port information in serinfo are
+ * suitable
+ */
+static int bcm_uart_verify_port(struct uart_port *port,
+ struct serial_struct *serinfo)
+{
+ if (port->type != PORT_BCM63XX)
+ return -EINVAL;
+ if (port->irq != serinfo->irq)
+ return -EINVAL;
+ if (port->iotype != serinfo->io_type)
+ return -EINVAL;
+ if (port->mapbase != (unsigned long)serinfo->iomem_base)
+ return -EINVAL;
+ return 0;
+}
+
+/* serial core callbacks */
+static struct uart_ops bcm_uart_ops = {
+ .tx_empty = bcm_uart_tx_empty,
+ .get_mctrl = bcm_uart_get_mctrl,
+ .set_mctrl = bcm_uart_set_mctrl,
+ .start_tx = bcm_uart_start_tx,
+ .stop_tx = bcm_uart_stop_tx,
+ .stop_rx = bcm_uart_stop_rx,
+ .enable_ms = bcm_uart_enable_ms,
+ .break_ctl = bcm_uart_break_ctl,
+ .startup = bcm_uart_startup,
+ .shutdown = bcm_uart_shutdown,
+ .set_termios = bcm_uart_set_termios,
+ .type = bcm_uart_type,
+ .release_port = bcm_uart_release_port,
+ .request_port = bcm_uart_request_port,
+ .config_port = bcm_uart_config_port,
+ .verify_port = bcm_uart_verify_port,
+};
+
+
+
+#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+ unsigned int tmout;
+
+ /* Wait up to 10ms for the character(s) to be sent. */
+ tmout = 10000;
+ while (--tmout) {
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_IR_REG);
+ if (val & UART_IR_STAT(UART_IR_TXEMPTY))
+ break;
+ udelay(1);
+ }
+
+ /* Wait up to 1s for flow control if necessary */
+ if (port->flags & UPF_CONS_FLOW) {
+ tmout = 1000000;
+ while (--tmout) {
+ unsigned int val;
+
+ val = bcm_uart_readl(port, UART_EXTINP_REG);
+ if (val & UART_EXTINP_CTS_MASK)
+ break;
+ udelay(1);
+ }
+ }
+}
+
+/*
+ * output given char
+ */
+static void bcm_console_putchar(struct uart_port *port, int ch)
+{
+ wait_for_xmitr(port);
+ bcm_uart_writel(port, ch, UART_FIFO_REG);
+}
+
+/*
+ * console core request to output given string
+ */
+static void bcm_console_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct uart_port *port;
+ unsigned long flags;
+ int locked;
+
+ port = &ports[co->index];
+
+ local_irq_save(flags);
+ if (port->sysrq) {
+ /* bcm_uart_interrupt() already took the lock */
+ locked = 0;
+ } else if (oops_in_progress) {
+ locked = spin_trylock(&port->lock);
+ } else {
+ spin_lock(&port->lock);
+ locked = 1;
+ }
+
+ /* call helper to deal with \r\n */
+ uart_console_write(port, s, count, bcm_console_putchar);
+
+ /* and wait for char to be transmitted */
+ wait_for_xmitr(port);
+
+ if (locked)
+ spin_unlock(&port->lock);
+ local_irq_restore(flags);
+}
+
+/*
+ * console core request to setup given console, find matching uart
+ * port and setup it.
+ */
+static int bcm_console_setup(struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
+ return -EINVAL;
+ port = &ports[co->index];
+ if (!port->membase)
+ return -ENODEV;
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver bcm_uart_driver;
+
+static struct console bcm63xx_console = {
+ .name = "ttyS",
+ .write = bcm_console_write,
+ .device = uart_console_device,
+ .setup = bcm_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &bcm_uart_driver,
+};
+
+static int __init bcm63xx_console_init(void)
+{
+ register_console(&bcm63xx_console);
+ return 0;
+}
+
+console_initcall(bcm63xx_console_init);
+
+#define BCM63XX_CONSOLE (&bcm63xx_console)
+#else
+#define BCM63XX_CONSOLE NULL
+#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
+
+static struct uart_driver bcm_uart_driver = {
+ .owner = THIS_MODULE,
+ .driver_name = "bcm63xx_uart",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = 1,
+ .cons = BCM63XX_CONSOLE,
+};
+
+/*
+ * platform driver probe/remove callback
+ */
+static int __devinit bcm_uart_probe(struct platform_device *pdev)
+{
+ struct resource *res_mem, *res_irq;
+ struct uart_port *port;
+ struct clk *clk;
+ int ret;
+
+ if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
+ return -EINVAL;
+
+ if (ports[pdev->id].membase)
+ return -EBUSY;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res_mem)
+ return -ENODEV;
+
+ res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res_irq)
+ return -ENODEV;
+
+ clk = clk_get(&pdev->dev, "periph");
+ if (IS_ERR(clk))
+ return -ENODEV;
+
+ port = &ports[pdev->id];
+ memset(port, 0, sizeof(*port));
+ port->iotype = UPIO_MEM;
+ port->mapbase = res_mem->start;
+ port->irq = res_irq->start;
+ port->ops = &bcm_uart_ops;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->dev = &pdev->dev;
+ port->fifosize = 16;
+ port->uartclk = clk_get_rate(clk) / 2;
+ clk_put(clk);
+
+ ret = uart_add_one_port(&bcm_uart_driver, port);
+ if (ret) {
+ kfree(port);
+ return ret;
+ }
+ platform_set_drvdata(pdev, port);
+ return 0;
+}
+
+static int __devexit bcm_uart_remove(struct platform_device *pdev)
+{
+ struct uart_port *port;
+
+ port = platform_get_drvdata(pdev);
+ uart_remove_one_port(&bcm_uart_driver, port);
+ platform_set_drvdata(pdev, NULL);
+ /* mark port as free */
+ ports[pdev->id].membase = 0;
+ return 0;
+}
+
+/*
+ * platform driver stuff
+ */
+static struct platform_driver bcm_uart_platform_driver = {
+ .probe = bcm_uart_probe,
+ .remove = __devexit_p(bcm_uart_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "bcm63xx_uart",
+ },
+};
+
+static int __init bcm_uart_init(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&bcm_uart_driver);
+ if (ret)
+ return ret;
+
+ ret = platform_driver_register(&bcm_uart_platform_driver);
+ if (ret)
+ uart_unregister_driver(&bcm_uart_driver);
+
+ return ret;
+}
+
+static void __exit bcm_uart_exit(void)
+{
+ platform_driver_unregister(&bcm_uart_platform_driver);
+ uart_unregister_driver(&bcm_uart_driver);
+}
+
+module_init(bcm_uart_init);
+module_exit(bcm_uart_exit);
+
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
+MODULE_LICENSE("GPL");
u8 *p;
int count;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- struct circ_buf *xmit = &port->info->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
/* Handle xon/xoff */
if (port->x_char) {
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/major.h>
+#include <linux/smp_lock.h>
#include <linux/string.h>
#include <linux/fcntl.h>
#include <linux/mm.h>
if (port < 4) {
temp = readl(stop_proc[port].global_control_reg);
temp =
- (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
+ (temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
writel(temp, stop_proc[port].global_control_reg);
/* write flush */
if (port < 4) {
temp = readl(start_proc[port].global_control_reg);
temp =
- (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
+ (temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
writel(temp, start_proc[port].global_control_reg);
/* write flush */
dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n");
}
- if (new_page != NULL)
- pci_free_consistent(dev, 4096, new_page, temp_pci);
+ if (new_page != NULL)
+ pci_free_consistent(dev, 4096, new_page, temp_pci);
}
static int startup(struct icom_port *icom_port)
const struct pci_device_id *ent)
{
int index;
- unsigned int command_reg;
- int retval;
- struct icom_adapter *icom_adapter;
- struct icom_port *icom_port;
+ unsigned int command_reg;
+ int retval;
+ struct icom_adapter *icom_adapter;
+ struct icom_port *icom_port;
- retval = pci_enable_device(dev);
- if (retval) {
+ retval = pci_enable_device(dev);
+ if (retval) {
dev_err(&dev->dev, "Device enable FAILED\n");
- return retval;
+ return retval;
}
if ( (retval = pci_request_regions(dev, "icom"))) {
return retval;
}
- pci_set_master(dev);
+ pci_set_master(dev);
- if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
+ if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
dev_err(&dev->dev, "PCI Config read FAILED\n");
- return retval;
- }
+ return retval;
+ }
pci_write_config_dword(dev, PCI_COMMAND,
command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
| PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
- if (ent->driver_data == ADAPTER_V1) {
+ if (ent->driver_data == ADAPTER_V1) {
pci_write_config_dword(dev, 0x44, 0x8300830A);
- } else {
+ } else {
pci_write_config_dword(dev, 0x44, 0x42004200);
pci_write_config_dword(dev, 0x48, 0x42004200);
- }
+ }
retval = icom_alloc_adapter(&icom_adapter);
goto probe_exit0;
}
- icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
- icom_adapter->pci_dev = dev;
- icom_adapter->version = ent->driver_data;
- icom_adapter->subsystem_id = ent->subdevice;
+ icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
+ icom_adapter->pci_dev = dev;
+ icom_adapter->version = ent->driver_data;
+ icom_adapter->subsystem_id = ent->subdevice;
retval = icom_init_ports(icom_adapter);
goto probe_exit1;
}
- icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
+ icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
if (!icom_adapter->base_addr)
goto probe_exit1;
retval = icom_load_ports(icom_adapter);
- for (index = 0; index < icom_adapter->numb_ports; index++) {
+ for (index = 0; index < icom_adapter->numb_ports; index++) {
icom_port = &icom_adapter->port_info[index];
if (icom_port->status == ICOM_PORT_ACTIVE) {
icom_port->status = ICOM_PORT_OFF;
dev_err(&dev->dev, "Device add failed\n");
} else
- dev_info(&dev->dev, "Device added\n");
+ dev_info(&dev->dev, "Device added\n");
}
}
pci_release_regions(dev);
pci_disable_device(dev);
- return retval;
-
-
+ return retval;
}
static void __devexit icom_remove(struct pci_dev *dev)
return -EINVAL;
if ((ser->irq != port->irq) ||
- (ser->io_type != SERIAL_IO_MEM) ||
+ (ser->io_type != UPIO_MEM) ||
(ser->baud_base != port->uartclk) ||
(ser->iomem_base != (void *)port->mapbase) ||
(ser->hub6 != 0))
.cons = PXA_CONSOLE,
};
-static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM
+static int serial_pxa_suspend(struct device *dev)
{
- struct uart_pxa_port *sport = platform_get_drvdata(dev);
+ struct uart_pxa_port *sport = dev_get_drvdata(dev);
if (sport)
uart_suspend_port(&serial_pxa_reg, &sport->port);
return 0;
}
-static int serial_pxa_resume(struct platform_device *dev)
+static int serial_pxa_resume(struct device *dev)
{
- struct uart_pxa_port *sport = platform_get_drvdata(dev);
+ struct uart_pxa_port *sport = dev_get_drvdata(dev);
if (sport)
uart_resume_port(&serial_pxa_reg, &sport->port);
return 0;
}
+static struct dev_pm_ops serial_pxa_pm_ops = {
+ .suspend = serial_pxa_suspend,
+ .resume = serial_pxa_resume,
+};
+#endif
+
static int serial_pxa_probe(struct platform_device *dev)
{
struct uart_pxa_port *sport;
.probe = serial_pxa_probe,
.remove = serial_pxa_remove,
- .suspend = serial_pxa_suspend,
- .resume = serial_pxa_resume,
.driver = {
.name = "pxa2xx-uart",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &serial_pxa_pm_ops,
+#endif
},
};
PPSR |= PPC_TXD1 | PPC_TXD3;
}
-void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns)
+void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns)
{
if (fns->get_mctrl)
sa1100_pops.get_mctrl = fns->get_mctrl;
BUG_ON(!kernel_locked());
+ if (!state)
+ return;
+
uport = state->uart_port;
port = &state->port;
*/
if (port->flags & ASYNC_INITIALIZED) {
unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&uport->lock, flags);
uport->ops->stop_rx(uport);
- spin_unlock_irqrestore(&port->lock, flags);
+ spin_unlock_irqrestore(&uport->lock, flags);
/*
* Before we drop DTR, make sure the UART transmitter
* has completely drained; this is especially
/**
* uart_add_one_port - attach a driver-defined port structure
* @drv: pointer to the uart low level driver structure for this port
- * @port: uart port structure to use for this port.
+ * @uport: uart port structure to use for this port.
*
* This allows the driver to register its own uart_port structure
* with the core driver. The main purpose is to allow the low
/**
* uart_remove_one_port - detach a driver defined port structure
* @drv: pointer to the uart low level driver structure for this port
- * @port: uart port structure for this port
+ * @uport: uart port structure for this port
*
* This unhooks (and hangs up) the specified port structure from the
* core driver. No further calls will be made to the low-level code
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
- PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
- PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
- PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
- PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
- PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
+ PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "COMpad2.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
- PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
+ PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "GLOBETROTTER.cis"),
PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
}
+static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port)
+{
+ return container_of(port, struct uart_txx9_port, port);
+}
+
static void serial_txx9_stop_tx(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
}
static void serial_txx9_start_tx(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
}
static void serial_txx9_stop_rx(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
}
static void serial_txx9_initialize(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int tmout = 10000;
sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
static unsigned int serial_txx9_tx_empty(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
unsigned int ret;
static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int ret;
/* no modem control lines */
static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
if (mctrl & TIOCM_RTS)
sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
spin_lock_irqsave(&up->port.lock, flags);
{
unsigned int ier;
unsigned char c;
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
/*
* First save the IER then disable the interrupts
static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
{
unsigned int ier;
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
/*
* First save the IER then disable the interrupts
static int serial_txx9_startup(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
int retval;
static void serial_txx9_shutdown(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned long flags;
/*
serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
unsigned int cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
static void serial_txx9_release_port(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
serial_txx9_release_resource(up);
}
static int serial_txx9_request_port(struct uart_port *port)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
return serial_txx9_request_resource(up);
}
static void serial_txx9_config_port(struct uart_port *port, int uflags)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
int ret;
/*
static void serial_txx9_console_putchar(struct uart_port *port, int ch)
{
- struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+ struct uart_txx9_port *up = to_uart_txx9_port(port);
wait_for_xmitr(up);
sio_out(up, TXX9_SITFIFO, ch);
*/
static u32 sfi_use_ioremap __read_mostly;
-static void __iomem *sfi_map_memory(u64 phys, u32 size)
+/*
+ * sfi_un/map_memory calls early_ioremap/iounmap which is a __init function
+ * and introduces section mismatch. So use __ref to make it calm.
+ */
+static void __iomem * __ref sfi_map_memory(u64 phys, u32 size)
{
if (!phys || !size)
return NULL;
return early_ioremap(phys, size);
}
-static void sfi_unmap_memory(void __iomem *virt, u32 size)
+static void __ref sfi_unmap_memory(void __iomem *virt, u32 size)
{
if (!virt || !size)
return;
* sfi_verify_table()
* Sanity check table lengh, calculate checksum
*/
-static __init int sfi_verify_table(struct sfi_table_header *table)
+static int sfi_verify_table(struct sfi_table_header *table)
{
u8 checksum = 0;
* the mapped virt address will be returned, and the virt space
* will be released by call sfi_put_table() later
*
+ * This two cases are from two different functions with two different
+ * sections and causes section mismatch warning. So use __ref to tell
+ * modpost not to make any noise.
+ *
* Return value:
* NULL: when can't find a table matching the key
* ERR_PTR(error): error value
* virt table address: when a matched table is found
*/
-struct sfi_table_header *sfi_check_table(u64 pa, struct sfi_table_key *key)
+struct sfi_table_header *
+ __ref sfi_check_table(u64 pa, struct sfi_table_key *key)
{
struct sfi_table_header *th;
void *ret = NULL;
obj-$(CONFIG_SPI_AU1550) += au1550_spi.o
obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
-obj-$(CONFIG_SPI_IMX) += mxc_spi.o
+obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \
GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
- GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+ GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \
GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \
GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
return -EINVAL;
}
if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
- if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
- && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+ if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE)
+ && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) {
dev_err(chip_info->dev,
"Clock Phase is configured incorrectly\n");
return -EINVAL;
chip_info->data_size = SSP_DATA_BITS_12;
chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
- chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+ chip_info->clk_phase = SSP_CLK_SECOND_EDGE;
chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
chip_info->ctrl_len = SSP_BITS_8;
chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
* ST Micro derivative, this has 32bit wide
* and 32 locations deep TX/RX FIFO
*/
- .id = 0x00108022,
+ .id = 0x01080022,
.mask = 0xffffffff,
.data = &vendor_st,
},
+++ /dev/null
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 Juergen Beisert
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation
- * 51 Franklin Street, Fifth Floor
- * Boston, MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/types.h>
-
-#include <mach/spi.h>
-
-#define DRIVER_NAME "spi_imx"
-
-#define MXC_CSPIRXDATA 0x00
-#define MXC_CSPITXDATA 0x04
-#define MXC_CSPICTRL 0x08
-#define MXC_CSPIINT 0x0c
-#define MXC_RESET 0x1c
-
-/* generic defines to abstract from the different register layouts */
-#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
-#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
-
-struct mxc_spi_config {
- unsigned int speed_hz;
- unsigned int bpw;
- unsigned int mode;
- int cs;
-};
-
-struct mxc_spi_data {
- struct spi_bitbang bitbang;
-
- struct completion xfer_done;
- void *base;
- int irq;
- struct clk *clk;
- unsigned long spi_clk;
- int *chipselect;
-
- unsigned int count;
- void (*tx)(struct mxc_spi_data *);
- void (*rx)(struct mxc_spi_data *);
- void *rx_buf;
- const void *tx_buf;
- unsigned int txfifo; /* number of words pushed in tx FIFO */
-
- /* SoC specific functions */
- void (*intctrl)(struct mxc_spi_data *, int);
- int (*config)(struct mxc_spi_data *, struct mxc_spi_config *);
- void (*trigger)(struct mxc_spi_data *);
- int (*rx_available)(struct mxc_spi_data *);
-};
-
-#define MXC_SPI_BUF_RX(type) \
-static void mxc_spi_buf_rx_##type(struct mxc_spi_data *mxc_spi) \
-{ \
- unsigned int val = readl(mxc_spi->base + MXC_CSPIRXDATA); \
- \
- if (mxc_spi->rx_buf) { \
- *(type *)mxc_spi->rx_buf = val; \
- mxc_spi->rx_buf += sizeof(type); \
- } \
-}
-
-#define MXC_SPI_BUF_TX(type) \
-static void mxc_spi_buf_tx_##type(struct mxc_spi_data *mxc_spi) \
-{ \
- type val = 0; \
- \
- if (mxc_spi->tx_buf) { \
- val = *(type *)mxc_spi->tx_buf; \
- mxc_spi->tx_buf += sizeof(type); \
- } \
- \
- mxc_spi->count -= sizeof(type); \
- \
- writel(val, mxc_spi->base + MXC_CSPITXDATA); \
-}
-
-MXC_SPI_BUF_RX(u8)
-MXC_SPI_BUF_TX(u8)
-MXC_SPI_BUF_RX(u16)
-MXC_SPI_BUF_TX(u16)
-MXC_SPI_BUF_RX(u32)
-MXC_SPI_BUF_TX(u32)
-
-/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
- * (which is currently not the case in this driver)
- */
-static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
- 256, 384, 512, 768, 1024};
-
-/* MX21, MX27 */
-static unsigned int mxc_spi_clkdiv_1(unsigned int fin,
- unsigned int fspi)
-{
- int i, max;
-
- if (cpu_is_mx21())
- max = 18;
- else
- max = 16;
-
- for (i = 2; i < max; i++)
- if (fspi * mxc_clkdivs[i] >= fin)
- return i;
-
- return max;
-}
-
-/* MX1, MX31, MX35 */
-static unsigned int mxc_spi_clkdiv_2(unsigned int fin,
- unsigned int fspi)
-{
- int i, div = 4;
-
- for (i = 0; i < 7; i++) {
- if (fspi * div >= fin)
- return i;
- div <<= 1;
- }
-
- return 7;
-}
-
-#define MX31_INTREG_TEEN (1 << 0)
-#define MX31_INTREG_RREN (1 << 3)
-
-#define MX31_CSPICTRL_ENABLE (1 << 0)
-#define MX31_CSPICTRL_MASTER (1 << 1)
-#define MX31_CSPICTRL_XCH (1 << 2)
-#define MX31_CSPICTRL_POL (1 << 4)
-#define MX31_CSPICTRL_PHA (1 << 5)
-#define MX31_CSPICTRL_SSCTL (1 << 6)
-#define MX31_CSPICTRL_SSPOL (1 << 7)
-#define MX31_CSPICTRL_BC_SHIFT 8
-#define MX35_CSPICTRL_BL_SHIFT 20
-#define MX31_CSPICTRL_CS_SHIFT 24
-#define MX35_CSPICTRL_CS_SHIFT 12
-#define MX31_CSPICTRL_DR_SHIFT 16
-
-#define MX31_CSPISTATUS 0x14
-#define MX31_STATUS_RR (1 << 3)
-
-/* These functions also work for the i.MX35, but be aware that
- * the i.MX35 has a slightly different register layout for bits
- * we do not use here.
- */
-static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable)
-{
- unsigned int val = 0;
-
- if (enable & MXC_INT_TE)
- val |= MX31_INTREG_TEEN;
- if (enable & MXC_INT_RR)
- val |= MX31_INTREG_RREN;
-
- writel(val, mxc_spi->base + MXC_CSPIINT);
-}
-
-static void mx31_trigger(struct mxc_spi_data *mxc_spi)
-{
- unsigned int reg;
-
- reg = readl(mxc_spi->base + MXC_CSPICTRL);
- reg |= MX31_CSPICTRL_XCH;
- writel(reg, mxc_spi->base + MXC_CSPICTRL);
-}
-
-static int mx31_config(struct mxc_spi_data *mxc_spi,
- struct mxc_spi_config *config)
-{
- unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
-
- reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
- MX31_CSPICTRL_DR_SHIFT;
-
- if (cpu_is_mx31())
- reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
- else if (cpu_is_mx35()) {
- reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
- reg |= MX31_CSPICTRL_SSCTL;
- }
-
- if (config->mode & SPI_CPHA)
- reg |= MX31_CSPICTRL_PHA;
- if (config->mode & SPI_CPOL)
- reg |= MX31_CSPICTRL_POL;
- if (config->mode & SPI_CS_HIGH)
- reg |= MX31_CSPICTRL_SSPOL;
- if (config->cs < 0) {
- if (cpu_is_mx31())
- reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
- else if (cpu_is_mx35())
- reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
- }
-
- writel(reg, mxc_spi->base + MXC_CSPICTRL);
-
- return 0;
-}
-
-static int mx31_rx_available(struct mxc_spi_data *mxc_spi)
-{
- return readl(mxc_spi->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
-}
-
-#define MX27_INTREG_RR (1 << 4)
-#define MX27_INTREG_TEEN (1 << 9)
-#define MX27_INTREG_RREN (1 << 13)
-
-#define MX27_CSPICTRL_POL (1 << 5)
-#define MX27_CSPICTRL_PHA (1 << 6)
-#define MX27_CSPICTRL_SSPOL (1 << 8)
-#define MX27_CSPICTRL_XCH (1 << 9)
-#define MX27_CSPICTRL_ENABLE (1 << 10)
-#define MX27_CSPICTRL_MASTER (1 << 11)
-#define MX27_CSPICTRL_DR_SHIFT 14
-#define MX27_CSPICTRL_CS_SHIFT 19
-
-static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable)
-{
- unsigned int val = 0;
-
- if (enable & MXC_INT_TE)
- val |= MX27_INTREG_TEEN;
- if (enable & MXC_INT_RR)
- val |= MX27_INTREG_RREN;
-
- writel(val, mxc_spi->base + MXC_CSPIINT);
-}
-
-static void mx27_trigger(struct mxc_spi_data *mxc_spi)
-{
- unsigned int reg;
-
- reg = readl(mxc_spi->base + MXC_CSPICTRL);
- reg |= MX27_CSPICTRL_XCH;
- writel(reg, mxc_spi->base + MXC_CSPICTRL);
-}
-
-static int mx27_config(struct mxc_spi_data *mxc_spi,
- struct mxc_spi_config *config)
-{
- unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
-
- reg |= mxc_spi_clkdiv_1(mxc_spi->spi_clk, config->speed_hz) <<
- MX27_CSPICTRL_DR_SHIFT;
- reg |= config->bpw - 1;
-
- if (config->mode & SPI_CPHA)
- reg |= MX27_CSPICTRL_PHA;
- if (config->mode & SPI_CPOL)
- reg |= MX27_CSPICTRL_POL;
- if (config->mode & SPI_CS_HIGH)
- reg |= MX27_CSPICTRL_SSPOL;
- if (config->cs < 0)
- reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
-
- writel(reg, mxc_spi->base + MXC_CSPICTRL);
-
- return 0;
-}
-
-static int mx27_rx_available(struct mxc_spi_data *mxc_spi)
-{
- return readl(mxc_spi->base + MXC_CSPIINT) & MX27_INTREG_RR;
-}
-
-#define MX1_INTREG_RR (1 << 3)
-#define MX1_INTREG_TEEN (1 << 8)
-#define MX1_INTREG_RREN (1 << 11)
-
-#define MX1_CSPICTRL_POL (1 << 4)
-#define MX1_CSPICTRL_PHA (1 << 5)
-#define MX1_CSPICTRL_XCH (1 << 8)
-#define MX1_CSPICTRL_ENABLE (1 << 9)
-#define MX1_CSPICTRL_MASTER (1 << 10)
-#define MX1_CSPICTRL_DR_SHIFT 13
-
-static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable)
-{
- unsigned int val = 0;
-
- if (enable & MXC_INT_TE)
- val |= MX1_INTREG_TEEN;
- if (enable & MXC_INT_RR)
- val |= MX1_INTREG_RREN;
-
- writel(val, mxc_spi->base + MXC_CSPIINT);
-}
-
-static void mx1_trigger(struct mxc_spi_data *mxc_spi)
-{
- unsigned int reg;
-
- reg = readl(mxc_spi->base + MXC_CSPICTRL);
- reg |= MX1_CSPICTRL_XCH;
- writel(reg, mxc_spi->base + MXC_CSPICTRL);
-}
-
-static int mx1_config(struct mxc_spi_data *mxc_spi,
- struct mxc_spi_config *config)
-{
- unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
-
- reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
- MX1_CSPICTRL_DR_SHIFT;
- reg |= config->bpw - 1;
-
- if (config->mode & SPI_CPHA)
- reg |= MX1_CSPICTRL_PHA;
- if (config->mode & SPI_CPOL)
- reg |= MX1_CSPICTRL_POL;
-
- writel(reg, mxc_spi->base + MXC_CSPICTRL);
-
- return 0;
-}
-
-static int mx1_rx_available(struct mxc_spi_data *mxc_spi)
-{
- return readl(mxc_spi->base + MXC_CSPIINT) & MX1_INTREG_RR;
-}
-
-static void mxc_spi_chipselect(struct spi_device *spi, int is_active)
-{
- struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
- unsigned int cs = 0;
- int gpio = mxc_spi->chipselect[spi->chip_select];
- struct mxc_spi_config config;
-
- if (spi->mode & SPI_CS_HIGH)
- cs = 1;
-
- if (is_active == BITBANG_CS_INACTIVE) {
- if (gpio >= 0)
- gpio_set_value(gpio, !cs);
- return;
- }
-
- config.bpw = spi->bits_per_word;
- config.speed_hz = spi->max_speed_hz;
- config.mode = spi->mode;
- config.cs = mxc_spi->chipselect[spi->chip_select];
-
- mxc_spi->config(mxc_spi, &config);
-
- /* Initialize the functions for transfer */
- if (config.bpw <= 8) {
- mxc_spi->rx = mxc_spi_buf_rx_u8;
- mxc_spi->tx = mxc_spi_buf_tx_u8;
- } else if (config.bpw <= 16) {
- mxc_spi->rx = mxc_spi_buf_rx_u16;
- mxc_spi->tx = mxc_spi_buf_tx_u16;
- } else if (config.bpw <= 32) {
- mxc_spi->rx = mxc_spi_buf_rx_u32;
- mxc_spi->tx = mxc_spi_buf_tx_u32;
- } else
- BUG();
-
- if (gpio >= 0)
- gpio_set_value(gpio, cs);
-
- return;
-}
-
-static void mxc_spi_push(struct mxc_spi_data *mxc_spi)
-{
- while (mxc_spi->txfifo < 8) {
- if (!mxc_spi->count)
- break;
- mxc_spi->tx(mxc_spi);
- mxc_spi->txfifo++;
- }
-
- mxc_spi->trigger(mxc_spi);
-}
-
-static irqreturn_t mxc_spi_isr(int irq, void *dev_id)
-{
- struct mxc_spi_data *mxc_spi = dev_id;
-
- while (mxc_spi->rx_available(mxc_spi)) {
- mxc_spi->rx(mxc_spi);
- mxc_spi->txfifo--;
- }
-
- if (mxc_spi->count) {
- mxc_spi_push(mxc_spi);
- return IRQ_HANDLED;
- }
-
- if (mxc_spi->txfifo) {
- /* No data left to push, but still waiting for rx data,
- * enable receive data available interrupt.
- */
- mxc_spi->intctrl(mxc_spi, MXC_INT_RR);
- return IRQ_HANDLED;
- }
-
- mxc_spi->intctrl(mxc_spi, 0);
- complete(&mxc_spi->xfer_done);
-
- return IRQ_HANDLED;
-}
-
-static int mxc_spi_setupxfer(struct spi_device *spi,
- struct spi_transfer *t)
-{
- struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
- struct mxc_spi_config config;
-
- config.bpw = t ? t->bits_per_word : spi->bits_per_word;
- config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
- config.mode = spi->mode;
-
- mxc_spi->config(mxc_spi, &config);
-
- return 0;
-}
-
-static int mxc_spi_transfer(struct spi_device *spi,
- struct spi_transfer *transfer)
-{
- struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
-
- mxc_spi->tx_buf = transfer->tx_buf;
- mxc_spi->rx_buf = transfer->rx_buf;
- mxc_spi->count = transfer->len;
- mxc_spi->txfifo = 0;
-
- init_completion(&mxc_spi->xfer_done);
-
- mxc_spi_push(mxc_spi);
-
- mxc_spi->intctrl(mxc_spi, MXC_INT_TE);
-
- wait_for_completion(&mxc_spi->xfer_done);
-
- return transfer->len;
-}
-
-static int mxc_spi_setup(struct spi_device *spi)
-{
- if (!spi->bits_per_word)
- spi->bits_per_word = 8;
-
- pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
- spi->mode, spi->bits_per_word, spi->max_speed_hz);
-
- mxc_spi_chipselect(spi, BITBANG_CS_INACTIVE);
-
- return 0;
-}
-
-static void mxc_spi_cleanup(struct spi_device *spi)
-{
-}
-
-static int __init mxc_spi_probe(struct platform_device *pdev)
-{
- struct spi_imx_master *mxc_platform_info;
- struct spi_master *master;
- struct mxc_spi_data *mxc_spi;
- struct resource *res;
- int i, ret;
-
- mxc_platform_info = (struct spi_imx_master *)pdev->dev.platform_data;
- if (!mxc_platform_info) {
- dev_err(&pdev->dev, "can't get the platform data\n");
- return -EINVAL;
- }
-
- master = spi_alloc_master(&pdev->dev, sizeof(struct mxc_spi_data));
- if (!master)
- return -ENOMEM;
-
- platform_set_drvdata(pdev, master);
-
- master->bus_num = pdev->id;
- master->num_chipselect = mxc_platform_info->num_chipselect;
-
- mxc_spi = spi_master_get_devdata(master);
- mxc_spi->bitbang.master = spi_master_get(master);
- mxc_spi->chipselect = mxc_platform_info->chipselect;
-
- for (i = 0; i < master->num_chipselect; i++) {
- if (mxc_spi->chipselect[i] < 0)
- continue;
- ret = gpio_request(mxc_spi->chipselect[i], DRIVER_NAME);
- if (ret) {
- i--;
- while (i > 0)
- if (mxc_spi->chipselect[i] >= 0)
- gpio_free(mxc_spi->chipselect[i--]);
- dev_err(&pdev->dev, "can't get cs gpios");
- goto out_master_put;
- }
- gpio_direction_output(mxc_spi->chipselect[i], 1);
- }
-
- mxc_spi->bitbang.chipselect = mxc_spi_chipselect;
- mxc_spi->bitbang.setup_transfer = mxc_spi_setupxfer;
- mxc_spi->bitbang.txrx_bufs = mxc_spi_transfer;
- mxc_spi->bitbang.master->setup = mxc_spi_setup;
- mxc_spi->bitbang.master->cleanup = mxc_spi_cleanup;
-
- init_completion(&mxc_spi->xfer_done);
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "can't get platform resource\n");
- ret = -ENOMEM;
- goto out_gpio_free;
- }
-
- if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
- dev_err(&pdev->dev, "request_mem_region failed\n");
- ret = -EBUSY;
- goto out_gpio_free;
- }
-
- mxc_spi->base = ioremap(res->start, resource_size(res));
- if (!mxc_spi->base) {
- ret = -EINVAL;
- goto out_release_mem;
- }
-
- mxc_spi->irq = platform_get_irq(pdev, 0);
- if (!mxc_spi->irq) {
- ret = -EINVAL;
- goto out_iounmap;
- }
-
- ret = request_irq(mxc_spi->irq, mxc_spi_isr, 0, DRIVER_NAME, mxc_spi);
- if (ret) {
- dev_err(&pdev->dev, "can't get irq%d: %d\n", mxc_spi->irq, ret);
- goto out_iounmap;
- }
-
- if (cpu_is_mx31() || cpu_is_mx35()) {
- mxc_spi->intctrl = mx31_intctrl;
- mxc_spi->config = mx31_config;
- mxc_spi->trigger = mx31_trigger;
- mxc_spi->rx_available = mx31_rx_available;
- } else if (cpu_is_mx27() || cpu_is_mx21()) {
- mxc_spi->intctrl = mx27_intctrl;
- mxc_spi->config = mx27_config;
- mxc_spi->trigger = mx27_trigger;
- mxc_spi->rx_available = mx27_rx_available;
- } else if (cpu_is_mx1()) {
- mxc_spi->intctrl = mx1_intctrl;
- mxc_spi->config = mx1_config;
- mxc_spi->trigger = mx1_trigger;
- mxc_spi->rx_available = mx1_rx_available;
- } else
- BUG();
-
- mxc_spi->clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(mxc_spi->clk)) {
- dev_err(&pdev->dev, "unable to get clock\n");
- ret = PTR_ERR(mxc_spi->clk);
- goto out_free_irq;
- }
-
- clk_enable(mxc_spi->clk);
- mxc_spi->spi_clk = clk_get_rate(mxc_spi->clk);
-
- if (!cpu_is_mx31() || !cpu_is_mx35())
- writel(1, mxc_spi->base + MXC_RESET);
-
- mxc_spi->intctrl(mxc_spi, 0);
-
- ret = spi_bitbang_start(&mxc_spi->bitbang);
- if (ret) {
- dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
- goto out_clk_put;
- }
-
- dev_info(&pdev->dev, "probed\n");
-
- return ret;
-
-out_clk_put:
- clk_disable(mxc_spi->clk);
- clk_put(mxc_spi->clk);
-out_free_irq:
- free_irq(mxc_spi->irq, mxc_spi);
-out_iounmap:
- iounmap(mxc_spi->base);
-out_release_mem:
- release_mem_region(res->start, resource_size(res));
-out_gpio_free:
- for (i = 0; i < master->num_chipselect; i++)
- if (mxc_spi->chipselect[i] >= 0)
- gpio_free(mxc_spi->chipselect[i]);
-out_master_put:
- spi_master_put(master);
- kfree(master);
- platform_set_drvdata(pdev, NULL);
- return ret;
-}
-
-static int __exit mxc_spi_remove(struct platform_device *pdev)
-{
- struct spi_master *master = platform_get_drvdata(pdev);
- struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- struct mxc_spi_data *mxc_spi = spi_master_get_devdata(master);
- int i;
-
- spi_bitbang_stop(&mxc_spi->bitbang);
-
- writel(0, mxc_spi->base + MXC_CSPICTRL);
- clk_disable(mxc_spi->clk);
- clk_put(mxc_spi->clk);
- free_irq(mxc_spi->irq, mxc_spi);
- iounmap(mxc_spi->base);
-
- for (i = 0; i < master->num_chipselect; i++)
- if (mxc_spi->chipselect[i] >= 0)
- gpio_free(mxc_spi->chipselect[i]);
-
- spi_master_put(master);
-
- release_mem_region(res->start, resource_size(res));
-
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-static struct platform_driver mxc_spi_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .probe = mxc_spi_probe,
- .remove = __exit_p(mxc_spi_remove),
-};
-
-static int __init mxc_spi_init(void)
-{
- return platform_driver_register(&mxc_spi_driver);
-}
-
-static void __exit mxc_spi_exit(void)
-{
- platform_driver_unregister(&mxc_spi_driver);
-}
-
-module_init(mxc_spi_init);
-module_exit(mxc_spi_exit);
-
-MODULE_DESCRIPTION("SPI Master Controller driver");
-MODULE_AUTHOR("Sascha Hauer, Pengutronix");
-MODULE_LICENSE("GPL");
}
#ifdef CONFIG_PM
-
-static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+static int pxa2xx_spi_suspend(struct device *dev)
{
- struct driver_data *drv_data = platform_get_drvdata(pdev);
+ struct driver_data *drv_data = dev_get_drvdata(dev);
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
return 0;
}
-static int pxa2xx_spi_resume(struct platform_device *pdev)
+static int pxa2xx_spi_resume(struct device *dev)
{
- struct driver_data *drv_data = platform_get_drvdata(pdev);
+ struct driver_data *drv_data = dev_get_drvdata(dev);
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
/* Start the queue running */
status = start_queue(drv_data);
if (status != 0) {
- dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+ dev_err(dev, "problem starting queue (%d)\n", status);
return status;
}
return 0;
}
-#else
-#define pxa2xx_spi_suspend NULL
-#define pxa2xx_spi_resume NULL
-#endif /* CONFIG_PM */
+
+static struct dev_pm_ops pxa2xx_spi_pm_ops = {
+ .suspend = pxa2xx_spi_suspend,
+ .resume = pxa2xx_spi_resume,
+};
+#endif
static struct platform_driver driver = {
.driver = {
- .name = "pxa2xx-spi",
- .owner = THIS_MODULE,
+ .name = "pxa2xx-spi",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &pxa2xx_spi_pm_ops,
+#endif
},
.remove = pxa2xx_spi_remove,
.shutdown = pxa2xx_spi_shutdown,
- .suspend = pxa2xx_spi_suspend,
- .resume = pxa2xx_spi_resume,
};
static int __init pxa2xx_spi_init(void)
--- /dev/null
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/types.h>
+
+#include <mach/spi.h>
+
+#define DRIVER_NAME "spi_imx"
+
+#define MXC_CSPIRXDATA 0x00
+#define MXC_CSPITXDATA 0x04
+#define MXC_CSPICTRL 0x08
+#define MXC_CSPIINT 0x0c
+#define MXC_RESET 0x1c
+
+/* generic defines to abstract from the different register layouts */
+#define MXC_INT_RR (1 << 0) /* Receive data ready interrupt */
+#define MXC_INT_TE (1 << 1) /* Transmit FIFO empty interrupt */
+
+struct spi_imx_config {
+ unsigned int speed_hz;
+ unsigned int bpw;
+ unsigned int mode;
+ int cs;
+};
+
+struct spi_imx_data {
+ struct spi_bitbang bitbang;
+
+ struct completion xfer_done;
+ void *base;
+ int irq;
+ struct clk *clk;
+ unsigned long spi_clk;
+ int *chipselect;
+
+ unsigned int count;
+ void (*tx)(struct spi_imx_data *);
+ void (*rx)(struct spi_imx_data *);
+ void *rx_buf;
+ const void *tx_buf;
+ unsigned int txfifo; /* number of words pushed in tx FIFO */
+
+ /* SoC specific functions */
+ void (*intctrl)(struct spi_imx_data *, int);
+ int (*config)(struct spi_imx_data *, struct spi_imx_config *);
+ void (*trigger)(struct spi_imx_data *);
+ int (*rx_available)(struct spi_imx_data *);
+};
+
+#define MXC_SPI_BUF_RX(type) \
+static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx) \
+{ \
+ unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA); \
+ \
+ if (spi_imx->rx_buf) { \
+ *(type *)spi_imx->rx_buf = val; \
+ spi_imx->rx_buf += sizeof(type); \
+ } \
+}
+
+#define MXC_SPI_BUF_TX(type) \
+static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx) \
+{ \
+ type val = 0; \
+ \
+ if (spi_imx->tx_buf) { \
+ val = *(type *)spi_imx->tx_buf; \
+ spi_imx->tx_buf += sizeof(type); \
+ } \
+ \
+ spi_imx->count -= sizeof(type); \
+ \
+ writel(val, spi_imx->base + MXC_CSPITXDATA); \
+}
+
+MXC_SPI_BUF_RX(u8)
+MXC_SPI_BUF_TX(u8)
+MXC_SPI_BUF_RX(u16)
+MXC_SPI_BUF_TX(u16)
+MXC_SPI_BUF_RX(u32)
+MXC_SPI_BUF_TX(u32)
+
+/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
+ * (which is currently not the case in this driver)
+ */
+static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
+ 256, 384, 512, 768, 1024};
+
+/* MX21, MX27 */
+static unsigned int spi_imx_clkdiv_1(unsigned int fin,
+ unsigned int fspi)
+{
+ int i, max;
+
+ if (cpu_is_mx21())
+ max = 18;
+ else
+ max = 16;
+
+ for (i = 2; i < max; i++)
+ if (fspi * mxc_clkdivs[i] >= fin)
+ return i;
+
+ return max;
+}
+
+/* MX1, MX31, MX35 */
+static unsigned int spi_imx_clkdiv_2(unsigned int fin,
+ unsigned int fspi)
+{
+ int i, div = 4;
+
+ for (i = 0; i < 7; i++) {
+ if (fspi * div >= fin)
+ return i;
+ div <<= 1;
+ }
+
+ return 7;
+}
+
+#define MX31_INTREG_TEEN (1 << 0)
+#define MX31_INTREG_RREN (1 << 3)
+
+#define MX31_CSPICTRL_ENABLE (1 << 0)
+#define MX31_CSPICTRL_MASTER (1 << 1)
+#define MX31_CSPICTRL_XCH (1 << 2)
+#define MX31_CSPICTRL_POL (1 << 4)
+#define MX31_CSPICTRL_PHA (1 << 5)
+#define MX31_CSPICTRL_SSCTL (1 << 6)
+#define MX31_CSPICTRL_SSPOL (1 << 7)
+#define MX31_CSPICTRL_BC_SHIFT 8
+#define MX35_CSPICTRL_BL_SHIFT 20
+#define MX31_CSPICTRL_CS_SHIFT 24
+#define MX35_CSPICTRL_CS_SHIFT 12
+#define MX31_CSPICTRL_DR_SHIFT 16
+
+#define MX31_CSPISTATUS 0x14
+#define MX31_STATUS_RR (1 << 3)
+
+/* These functions also work for the i.MX35, but be aware that
+ * the i.MX35 has a slightly different register layout for bits
+ * we do not use here.
+ */
+static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+ unsigned int val = 0;
+
+ if (enable & MXC_INT_TE)
+ val |= MX31_INTREG_TEEN;
+ if (enable & MXC_INT_RR)
+ val |= MX31_INTREG_RREN;
+
+ writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void mx31_trigger(struct spi_imx_data *spi_imx)
+{
+ unsigned int reg;
+
+ reg = readl(spi_imx->base + MXC_CSPICTRL);
+ reg |= MX31_CSPICTRL_XCH;
+ writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int mx31_config(struct spi_imx_data *spi_imx,
+ struct spi_imx_config *config)
+{
+ unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+
+ reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+ MX31_CSPICTRL_DR_SHIFT;
+
+ if (cpu_is_mx31())
+ reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
+ else if (cpu_is_mx35()) {
+ reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
+ reg |= MX31_CSPICTRL_SSCTL;
+ }
+
+ if (config->mode & SPI_CPHA)
+ reg |= MX31_CSPICTRL_PHA;
+ if (config->mode & SPI_CPOL)
+ reg |= MX31_CSPICTRL_POL;
+ if (config->mode & SPI_CS_HIGH)
+ reg |= MX31_CSPICTRL_SSPOL;
+ if (config->cs < 0) {
+ if (cpu_is_mx31())
+ reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
+ else if (cpu_is_mx35())
+ reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
+ }
+
+ writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+ return 0;
+}
+
+static int mx31_rx_available(struct spi_imx_data *spi_imx)
+{
+ return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
+}
+
+#define MX27_INTREG_RR (1 << 4)
+#define MX27_INTREG_TEEN (1 << 9)
+#define MX27_INTREG_RREN (1 << 13)
+
+#define MX27_CSPICTRL_POL (1 << 5)
+#define MX27_CSPICTRL_PHA (1 << 6)
+#define MX27_CSPICTRL_SSPOL (1 << 8)
+#define MX27_CSPICTRL_XCH (1 << 9)
+#define MX27_CSPICTRL_ENABLE (1 << 10)
+#define MX27_CSPICTRL_MASTER (1 << 11)
+#define MX27_CSPICTRL_DR_SHIFT 14
+#define MX27_CSPICTRL_CS_SHIFT 19
+
+static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+ unsigned int val = 0;
+
+ if (enable & MXC_INT_TE)
+ val |= MX27_INTREG_TEEN;
+ if (enable & MXC_INT_RR)
+ val |= MX27_INTREG_RREN;
+
+ writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void mx27_trigger(struct spi_imx_data *spi_imx)
+{
+ unsigned int reg;
+
+ reg = readl(spi_imx->base + MXC_CSPICTRL);
+ reg |= MX27_CSPICTRL_XCH;
+ writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int mx27_config(struct spi_imx_data *spi_imx,
+ struct spi_imx_config *config)
+{
+ unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
+
+ reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) <<
+ MX27_CSPICTRL_DR_SHIFT;
+ reg |= config->bpw - 1;
+
+ if (config->mode & SPI_CPHA)
+ reg |= MX27_CSPICTRL_PHA;
+ if (config->mode & SPI_CPOL)
+ reg |= MX27_CSPICTRL_POL;
+ if (config->mode & SPI_CS_HIGH)
+ reg |= MX27_CSPICTRL_SSPOL;
+ if (config->cs < 0)
+ reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
+
+ writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+ return 0;
+}
+
+static int mx27_rx_available(struct spi_imx_data *spi_imx)
+{
+ return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR;
+}
+
+#define MX1_INTREG_RR (1 << 3)
+#define MX1_INTREG_TEEN (1 << 8)
+#define MX1_INTREG_RREN (1 << 11)
+
+#define MX1_CSPICTRL_POL (1 << 4)
+#define MX1_CSPICTRL_PHA (1 << 5)
+#define MX1_CSPICTRL_XCH (1 << 8)
+#define MX1_CSPICTRL_ENABLE (1 << 9)
+#define MX1_CSPICTRL_MASTER (1 << 10)
+#define MX1_CSPICTRL_DR_SHIFT 13
+
+static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+ unsigned int val = 0;
+
+ if (enable & MXC_INT_TE)
+ val |= MX1_INTREG_TEEN;
+ if (enable & MXC_INT_RR)
+ val |= MX1_INTREG_RREN;
+
+ writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void mx1_trigger(struct spi_imx_data *spi_imx)
+{
+ unsigned int reg;
+
+ reg = readl(spi_imx->base + MXC_CSPICTRL);
+ reg |= MX1_CSPICTRL_XCH;
+ writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int mx1_config(struct spi_imx_data *spi_imx,
+ struct spi_imx_config *config)
+{
+ unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
+
+ reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+ MX1_CSPICTRL_DR_SHIFT;
+ reg |= config->bpw - 1;
+
+ if (config->mode & SPI_CPHA)
+ reg |= MX1_CSPICTRL_PHA;
+ if (config->mode & SPI_CPOL)
+ reg |= MX1_CSPICTRL_POL;
+
+ writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+ return 0;
+}
+
+static int mx1_rx_available(struct spi_imx_data *spi_imx)
+{
+ return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
+}
+
+static void spi_imx_chipselect(struct spi_device *spi, int is_active)
+{
+ struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+ int gpio = spi_imx->chipselect[spi->chip_select];
+ int active = is_active != BITBANG_CS_INACTIVE;
+ int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
+
+ if (gpio < 0)
+ return;
+
+ gpio_set_value(gpio, dev_is_lowactive ^ active);
+}
+
+static void spi_imx_push(struct spi_imx_data *spi_imx)
+{
+ while (spi_imx->txfifo < 8) {
+ if (!spi_imx->count)
+ break;
+ spi_imx->tx(spi_imx);
+ spi_imx->txfifo++;
+ }
+
+ spi_imx->trigger(spi_imx);
+}
+
+static irqreturn_t spi_imx_isr(int irq, void *dev_id)
+{
+ struct spi_imx_data *spi_imx = dev_id;
+
+ while (spi_imx->rx_available(spi_imx)) {
+ spi_imx->rx(spi_imx);
+ spi_imx->txfifo--;
+ }
+
+ if (spi_imx->count) {
+ spi_imx_push(spi_imx);
+ return IRQ_HANDLED;
+ }
+
+ if (spi_imx->txfifo) {
+ /* No data left to push, but still waiting for rx data,
+ * enable receive data available interrupt.
+ */
+ spi_imx->intctrl(spi_imx, MXC_INT_RR);
+ return IRQ_HANDLED;
+ }
+
+ spi_imx->intctrl(spi_imx, 0);
+ complete(&spi_imx->xfer_done);
+
+ return IRQ_HANDLED;
+}
+
+static int spi_imx_setupxfer(struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+ struct spi_imx_config config;
+
+ config.bpw = t ? t->bits_per_word : spi->bits_per_word;
+ config.speed_hz = t ? t->speed_hz : spi->max_speed_hz;
+ config.mode = spi->mode;
+ config.cs = spi_imx->chipselect[spi->chip_select];
+
+ if (!config.speed_hz)
+ config.speed_hz = spi->max_speed_hz;
+ if (!config.bpw)
+ config.bpw = spi->bits_per_word;
+ if (!config.speed_hz)
+ config.speed_hz = spi->max_speed_hz;
+
+ /* Initialize the functions for transfer */
+ if (config.bpw <= 8) {
+ spi_imx->rx = spi_imx_buf_rx_u8;
+ spi_imx->tx = spi_imx_buf_tx_u8;
+ } else if (config.bpw <= 16) {
+ spi_imx->rx = spi_imx_buf_rx_u16;
+ spi_imx->tx = spi_imx_buf_tx_u16;
+ } else if (config.bpw <= 32) {
+ spi_imx->rx = spi_imx_buf_rx_u32;
+ spi_imx->tx = spi_imx_buf_tx_u32;
+ } else
+ BUG();
+
+ spi_imx->config(spi_imx, &config);
+
+ return 0;
+}
+
+static int spi_imx_transfer(struct spi_device *spi,
+ struct spi_transfer *transfer)
+{
+ struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+
+ spi_imx->tx_buf = transfer->tx_buf;
+ spi_imx->rx_buf = transfer->rx_buf;
+ spi_imx->count = transfer->len;
+ spi_imx->txfifo = 0;
+
+ init_completion(&spi_imx->xfer_done);
+
+ spi_imx_push(spi_imx);
+
+ spi_imx->intctrl(spi_imx, MXC_INT_TE);
+
+ wait_for_completion(&spi_imx->xfer_done);
+
+ return transfer->len;
+}
+
+static int spi_imx_setup(struct spi_device *spi)
+{
+ struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+ int gpio = spi_imx->chipselect[spi->chip_select];
+
+ pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
+ spi->mode, spi->bits_per_word, spi->max_speed_hz);
+
+ if (gpio >= 0)
+ gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
+
+ spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
+
+ return 0;
+}
+
+static void spi_imx_cleanup(struct spi_device *spi)
+{
+}
+
+static int __init spi_imx_probe(struct platform_device *pdev)
+{
+ struct spi_imx_master *mxc_platform_info;
+ struct spi_master *master;
+ struct spi_imx_data *spi_imx;
+ struct resource *res;
+ int i, ret;
+
+ mxc_platform_info = (struct spi_imx_master *)pdev->dev.platform_data;
+ if (!mxc_platform_info) {
+ dev_err(&pdev->dev, "can't get the platform data\n");
+ return -EINVAL;
+ }
+
+ master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
+ if (!master)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, master);
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = mxc_platform_info->num_chipselect;
+
+ spi_imx = spi_master_get_devdata(master);
+ spi_imx->bitbang.master = spi_master_get(master);
+ spi_imx->chipselect = mxc_platform_info->chipselect;
+
+ for (i = 0; i < master->num_chipselect; i++) {
+ if (spi_imx->chipselect[i] < 0)
+ continue;
+ ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
+ if (ret) {
+ i--;
+ while (i > 0)
+ if (spi_imx->chipselect[i] >= 0)
+ gpio_free(spi_imx->chipselect[i--]);
+ dev_err(&pdev->dev, "can't get cs gpios");
+ goto out_master_put;
+ }
+ }
+
+ spi_imx->bitbang.chipselect = spi_imx_chipselect;
+ spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
+ spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
+ spi_imx->bitbang.master->setup = spi_imx_setup;
+ spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
+ spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
+ init_completion(&spi_imx->xfer_done);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "can't get platform resource\n");
+ ret = -ENOMEM;
+ goto out_gpio_free;
+ }
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "request_mem_region failed\n");
+ ret = -EBUSY;
+ goto out_gpio_free;
+ }
+
+ spi_imx->base = ioremap(res->start, resource_size(res));
+ if (!spi_imx->base) {
+ ret = -EINVAL;
+ goto out_release_mem;
+ }
+
+ spi_imx->irq = platform_get_irq(pdev, 0);
+ if (!spi_imx->irq) {
+ ret = -EINVAL;
+ goto out_iounmap;
+ }
+
+ ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx);
+ if (ret) {
+ dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret);
+ goto out_iounmap;
+ }
+
+ if (cpu_is_mx31() || cpu_is_mx35()) {
+ spi_imx->intctrl = mx31_intctrl;
+ spi_imx->config = mx31_config;
+ spi_imx->trigger = mx31_trigger;
+ spi_imx->rx_available = mx31_rx_available;
+ } else if (cpu_is_mx27() || cpu_is_mx21()) {
+ spi_imx->intctrl = mx27_intctrl;
+ spi_imx->config = mx27_config;
+ spi_imx->trigger = mx27_trigger;
+ spi_imx->rx_available = mx27_rx_available;
+ } else if (cpu_is_mx1()) {
+ spi_imx->intctrl = mx1_intctrl;
+ spi_imx->config = mx1_config;
+ spi_imx->trigger = mx1_trigger;
+ spi_imx->rx_available = mx1_rx_available;
+ } else
+ BUG();
+
+ spi_imx->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(spi_imx->clk)) {
+ dev_err(&pdev->dev, "unable to get clock\n");
+ ret = PTR_ERR(spi_imx->clk);
+ goto out_free_irq;
+ }
+
+ clk_enable(spi_imx->clk);
+ spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
+
+ if (!cpu_is_mx31() || !cpu_is_mx35())
+ writel(1, spi_imx->base + MXC_RESET);
+
+ spi_imx->intctrl(spi_imx, 0);
+
+ ret = spi_bitbang_start(&spi_imx->bitbang);
+ if (ret) {
+ dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+ goto out_clk_put;
+ }
+
+ dev_info(&pdev->dev, "probed\n");
+
+ return ret;
+
+out_clk_put:
+ clk_disable(spi_imx->clk);
+ clk_put(spi_imx->clk);
+out_free_irq:
+ free_irq(spi_imx->irq, spi_imx);
+out_iounmap:
+ iounmap(spi_imx->base);
+out_release_mem:
+ release_mem_region(res->start, resource_size(res));
+out_gpio_free:
+ for (i = 0; i < master->num_chipselect; i++)
+ if (spi_imx->chipselect[i] >= 0)
+ gpio_free(spi_imx->chipselect[i]);
+out_master_put:
+ spi_master_put(master);
+ kfree(master);
+ platform_set_drvdata(pdev, NULL);
+ return ret;
+}
+
+static int __exit spi_imx_remove(struct platform_device *pdev)
+{
+ struct spi_master *master = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+ int i;
+
+ spi_bitbang_stop(&spi_imx->bitbang);
+
+ writel(0, spi_imx->base + MXC_CSPICTRL);
+ clk_disable(spi_imx->clk);
+ clk_put(spi_imx->clk);
+ free_irq(spi_imx->irq, spi_imx);
+ iounmap(spi_imx->base);
+
+ for (i = 0; i < master->num_chipselect; i++)
+ if (spi_imx->chipselect[i] >= 0)
+ gpio_free(spi_imx->chipselect[i]);
+
+ spi_master_put(master);
+
+ release_mem_region(res->start, resource_size(res));
+
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver spi_imx_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = spi_imx_probe,
+ .remove = __exit_p(spi_imx_remove),
+};
+
+static int __init spi_imx_init(void)
+{
+ return platform_driver_register(&spi_imx_driver);
+}
+
+static void __exit spi_imx_exit(void)
+{
+ platform_driver_unregister(&spi_imx_driver);
+}
+
+module_init(spi_imx_init);
+module_exit(spi_imx_exit);
+
+MODULE_DESCRIPTION("SPI Master Controller driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
return status;
}
-static struct file_operations spidev_fops = {
+static const struct file_operations spidev_fops = {
.owner = THIS_MODULE,
/* REVISIT switch to aio primitives, so that userspace
* gets more complete API coverage. It'll simplify things
source "drivers/staging/poch/Kconfig"
-source "drivers/staging/agnx/Kconfig"
-
source "drivers/staging/otus/Kconfig"
source "drivers/staging/rt2860/Kconfig"
source "drivers/staging/pohmelfs/Kconfig"
-source "drivers/staging/stlc45xx/Kconfig"
-
source "drivers/staging/b3dfg/Kconfig"
source "drivers/staging/phison/Kconfig"
source "drivers/staging/vt6656/Kconfig"
-source "drivers/staging/cpc-usb/Kconfig"
-
source "drivers/staging/udlfb/Kconfig"
source "drivers/staging/hv/Kconfig"
source "drivers/staging/iio/Kconfig"
-source "drivers/staging/cowloop/Kconfig"
-
endif # !STAGING_EXCLUDE_BUILD
endif # STAGING
obj-$(CONFIG_PRISM2_USB) += wlan-ng/
obj-$(CONFIG_ECHO) += echo/
obj-$(CONFIG_POCH) += poch/
-obj-$(CONFIG_AGNX) += agnx/
obj-$(CONFIG_OTUS) += otus/
obj-$(CONFIG_RT2860) += rt2860/
obj-$(CONFIG_RT2870) += rt2870/
obj-$(CONFIG_ANDROID) += dream/
obj-$(CONFIG_DST) += dst/
obj-$(CONFIG_POHMELFS) += pohmelfs/
-obj-$(CONFIG_STLC45XX) += stlc45xx/
obj-$(CONFIG_B3DFG) += b3dfg/
obj-$(CONFIG_IDE_PHISON) += phison/
obj-$(CONFIG_PLAN9AUTH) += p9auth/
obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
obj-$(CONFIG_VT6655) += vt6655/
obj-$(CONFIG_VT6656) += vt6656/
-obj-$(CONFIG_USB_CPC) += cpc-usb/
obj-$(CONFIG_FB_UDL) += udlfb/
obj-$(CONFIG_HYPERV) += hv/
obj-$(CONFIG_VME_BUS) += vme/
obj-$(CONFIG_RAR_REGISTER) += rar/
obj-$(CONFIG_DX_SEP) += sep/
obj-$(CONFIG_IIO) += iio/
-obj-$(CONFIG_COWLOOP) += cowloop/
+++ /dev/null
-config AGNX
- tristate "Wireless Airgo AGNX support"
- depends on WLAN_80211 && MAC80211
- ---help---
- This is an experimental driver for Airgo AGNX00 wireless chip.
+++ /dev/null
-obj-$(CONFIG_AGNX) += agnx.o
-
-agnx-objs := rf.o \
- pci.o \
- xmit.o \
- table.o \
- sta.o \
- phy.o
+++ /dev/null
-2008 7/18
-
-The RX has can't receive OFDM packet correctly,
-Guess it need be do RX calibrate.
-
-
-before 2008 3/1
-
-1: The RX get too much "CRC failed" pakets, it make the card work very unstable,
-2: After running a while, the card will get infinity "RX Frame" and "Error"
-interrupt, not know the root reason so far, try to fix it
-3: Using two tx queue txd and txm but not only txm.
-4: Set the hdr correctly.
-5: Try to do recalibrate correvtly
-6: To support G mode in future
-7: Fix the mac address can't be readed and set correctly in BE machine.
-8: Fix include and exclude FCS in promisous mode and manage mode
-9: Using sta_notify to notice sta change
-10: Turn on frame reception at the end of start
-11: Guess the card support HW_MULTICAST_FILTER
-12: The tx process should be implment atomic?
-13: Using mac80211 function to control the TX&RX LED.
+++ /dev/null
-#ifndef AGNX_H_
-#define AGNX_H_
-
-#include <linux/io.h>
-
-#include "xmit.h"
-
-#define PFX KBUILD_MODNAME ": "
-
-static inline u32 agnx_read32(void __iomem *mem_region, u32 offset)
-{
- return ioread32(mem_region + offset);
-}
-
-static inline void agnx_write32(void __iomem *mem_region, u32 offset, u32 val)
-{
- iowrite32(val, mem_region + offset);
-}
-
-/* static const struct ieee80211_rate agnx_rates_80211b[] = { */
-/* { .rate = 10, */
-/* .val = 0xa, */
-/* .flags = IEEE80211_RATE_CCK }, */
-/* { .rate = 20, */
-/* .val = 0x14, */
-/* .hw_value = -0x14, */
-/* .flags = IEEE80211_RATE_CCK_2 }, */
-/* { .rate = 55, */
-/* .val = 0x37, */
-/* .val2 = -0x37, */
-/* .flags = IEEE80211_RATE_CCK_2 }, */
-/* { .rate = 110, */
-/* .val = 0x6e, */
-/* .val2 = -0x6e, */
-/* .flags = IEEE80211_RATE_CCK_2 } */
-/* }; */
-
-
-static const struct ieee80211_rate agnx_rates_80211g[] = {
-/* { .bitrate = 10, .hw_value = 1, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, */
-/* { .bitrate = 20, .hw_value = 2, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, */
-/* { .bitrate = 55, .hw_value = 3, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, */
-/* { .bitrate = 110, .hw_value = 4, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, */
- { .bitrate = 10, .hw_value = 1, },
- { .bitrate = 20, .hw_value = 2, },
- { .bitrate = 55, .hw_value = 3, },
- { .bitrate = 110, .hw_value = 4,},
-
- { .bitrate = 60, .hw_value = 0xB, },
- { .bitrate = 90, .hw_value = 0xF, },
- { .bitrate = 120, .hw_value = 0xA },
- { .bitrate = 180, .hw_value = 0xE, },
-/* { .bitrate = 240, .hw_value = 0xd, }, */
- { .bitrate = 360, .hw_value = 0xD, },
- { .bitrate = 480, .hw_value = 0x8, },
- { .bitrate = 540, .hw_value = 0xC, },
-};
-
-static const struct ieee80211_channel agnx_channels[] = {
- { .center_freq = 2412, .hw_value = 1, },
- { .center_freq = 2417, .hw_value = 2, },
- { .center_freq = 2422, .hw_value = 3, },
- { .center_freq = 2427, .hw_value = 4, },
- { .center_freq = 2432, .hw_value = 5, },
- { .center_freq = 2437, .hw_value = 6, },
- { .center_freq = 2442, .hw_value = 7, },
- { .center_freq = 2447, .hw_value = 8, },
- { .center_freq = 2452, .hw_value = 9, },
- { .center_freq = 2457, .hw_value = 10, },
- { .center_freq = 2462, .hw_value = 11, },
- { .center_freq = 2467, .hw_value = 12, },
- { .center_freq = 2472, .hw_value = 13, },
- { .center_freq = 2484, .hw_value = 14, },
-};
-
-#define NUM_DRIVE_MODES 2
-/* Agnx operate mode */
-enum {
- AGNX_MODE_80211A,
- AGNX_MODE_80211A_OOB,
- AGNX_MODE_80211A_MIMO,
- AGNX_MODE_80211B_SHORT,
- AGNX_MODE_80211B_LONG,
- AGNX_MODE_80211G,
- AGNX_MODE_80211G_OOB,
- AGNX_MODE_80211G_MIMO,
-};
-
-enum {
- AGNX_UNINIT,
- AGNX_START,
- AGNX_STOP,
-};
-
-struct agnx_priv {
- struct pci_dev *pdev;
- struct ieee80211_hw *hw;
-
- spinlock_t lock;
- struct mutex mutex;
- unsigned int init_status;
-
- void __iomem *ctl; /* pointer to base ram address */
- void __iomem *data; /* pointer to mem region #2 */
-
- struct agnx_ring rx;
- struct agnx_ring txm;
- struct agnx_ring txd;
-
- /* Need volatile? */
- u32 irq_status;
-
- struct delayed_work periodic_work; /* Periodic tasks like recalibrate */
- struct ieee80211_low_level_stats stats;
-
- /* unsigned int phymode; */
- int mode;
- int channel;
- u8 bssid[ETH_ALEN];
-
- u8 mac_addr[ETH_ALEN];
- u8 revid;
-
- struct ieee80211_supported_band band;
-};
-
-
-#define AGNX_CHAINS_MAX 6
-#define AGNX_PERIODIC_DELAY 60000 /* unit: ms */
-#define LOCAL_STAID 0 /* the station entry for the card itself */
-#define BSSID_STAID 1 /* the station entry for the bsssid AP */
-#define spi_delay() udelay(40)
-#define eeprom_delay() udelay(40)
-#define routing_table_delay() udelay(50)
-
-/* PDU pool MEM region #2 */
-#define AGNX_PDUPOOL 0x40000 /* PDU pool */
-#define AGNX_PDUPOOL_SIZE 0x8000 /* PDU pool size*/
-#define AGNX_PDU_TX_WQ 0x41000 /* PDU list TX workqueue */
-#define AGNX_PDU_FREE 0x41800 /* Free Pool */
-#define PDU_SIZE 0x80 /* Free Pool node size */
-#define PDU_FREE_CNT 0xd0 /* Free pool node count */
-
-
-/* RF stuffs */
-extern void rf_chips_init(struct agnx_priv *priv);
-extern void spi_rc_write(void __iomem *mem_region, u32 chip_ids, u32 sw);
-extern void calibrate_oscillator(struct agnx_priv *priv);
-extern void do_calibration(struct agnx_priv *priv);
-extern void antenna_calibrate(struct agnx_priv *priv);
-extern void __antenna_calibrate(struct agnx_priv *priv);
-extern void print_offsets(struct agnx_priv *priv);
-extern int agnx_set_channel(struct agnx_priv *priv, unsigned int channel);
-
-
-#endif /* AGNX_H_ */
+++ /dev/null
-#ifndef AGNX_DEBUG_H_
-#define AGNX_DEBUG_H_
-
-#include "agnx.h"
-#include "phy.h"
-#include "sta.h"
-#include "xmit.h"
-
-#define AGNX_TRACE printk(KERN_ERR PFX "function:%s line:%d\n", __func__, __LINE__)
-
-#define PRINTK_LE16(prefix, var) printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.4x\n", le16_to_cpu(var))
-#define PRINTK_LE32(prefix, var) printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.8x\n", le32_to_cpu(var))
-#define PRINTK_U8(prefix, var) printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.2x\n", var)
-#define PRINTK_BE16(prefix, var) printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.4x\n", be16_to_cpu(var))
-#define PRINTK_BE32(prefix, var) printk(KERN_DEBUG PFX #prefix ": " #var " 0x%.8x\n", be32_to_cpu(var))
-#define PRINTK_BITS(prefix, field) printk(KERN_DEBUG PFX #prefix ": " #field ": 0x%x\n", (reg & field) >> field##_SHIFT)
-
-static inline void agnx_bug(char *reason)
-{
- printk(KERN_ERR PFX "%s\n", reason);
- BUG();
-}
-
-static inline void agnx_print_desc(struct agnx_desc *desc)
-{
- u32 reg = be32_to_cpu(desc->frag);
-
- PRINTK_BITS(DESC, PACKET_LEN);
-
- if (reg & FIRST_FRAG) {
- PRINTK_BITS(DESC, FIRST_PACKET_MASK);
- PRINTK_BITS(DESC, FIRST_RESERV2);
- PRINTK_BITS(DESC, FIRST_TKIP_ERROR);
- PRINTK_BITS(DESC, FIRST_TKIP_PACKET);
- PRINTK_BITS(DESC, FIRST_RESERV1);
- PRINTK_BITS(DESC, FIRST_FRAG_LEN);
- } else {
- PRINTK_BITS(DESC, SUB_RESERV2);
- PRINTK_BITS(DESC, SUB_TKIP_ERROR);
- PRINTK_BITS(DESC, SUB_TKIP_PACKET);
- PRINTK_BITS(DESC, SUB_RESERV1);
- PRINTK_BITS(DESC, SUB_FRAG_LEN);
- }
-
- PRINTK_BITS(DESC, FIRST_FRAG);
- PRINTK_BITS(DESC, LAST_FRAG);
- PRINTK_BITS(DESC, OWNER);
-}
-
-
-static inline void dump_ieee80211b_phy_hdr(__be32 _11b0, __be32 _11b1)
-{
-
-}
-
-static inline void agnx_print_hdr(struct agnx_hdr *hdr)
-{
- u32 reg;
- int i;
-
- reg = be32_to_cpu(hdr->reg0);
- PRINTK_BITS(HDR, RTS);
- PRINTK_BITS(HDR, MULTICAST);
- PRINTK_BITS(HDR, ACK);
- PRINTK_BITS(HDR, TM);
- PRINTK_BITS(HDR, RELAY);
- PRINTK_BITS(HDR, REVISED_FCS);
- PRINTK_BITS(HDR, NEXT_BUFFER_ADDR);
-
- reg = be32_to_cpu(hdr->reg1);
- PRINTK_BITS(HDR, MAC_HDR_LEN);
- PRINTK_BITS(HDR, DURATION_OVERIDE);
- PRINTK_BITS(HDR, PHY_HDR_OVERIDE);
- PRINTK_BITS(HDR, CRC_FAIL);
- PRINTK_BITS(HDR, SEQUENCE_NUMBER);
- PRINTK_BITS(HDR, BUFF_HEAD_ADDR);
-
- reg = be32_to_cpu(hdr->reg2);
- PRINTK_BITS(HDR, PDU_COUNT);
- PRINTK_BITS(HDR, WEP_KEY);
- PRINTK_BITS(HDR, USES_WEP_KEY);
- PRINTK_BITS(HDR, KEEP_ALIVE);
- PRINTK_BITS(HDR, BUFF_TAIL_ADDR);
-
- reg = be32_to_cpu(hdr->reg3);
- PRINTK_BITS(HDR, CTS_11G);
- PRINTK_BITS(HDR, RTS_11G);
- PRINTK_BITS(HDR, FRAG_SIZE);
- PRINTK_BITS(HDR, PAYLOAD_LEN);
- PRINTK_BITS(HDR, FRAG_NUM);
-
- reg = be32_to_cpu(hdr->reg4);
- PRINTK_BITS(HDR, RELAY_STAID);
- PRINTK_BITS(HDR, STATION_ID);
- PRINTK_BITS(HDR, WORKQUEUE_ID);
-
- reg = be32_to_cpu(hdr->reg5);
- /* printf the route flag */
- PRINTK_BITS(HDR, ROUTE_HOST);
- PRINTK_BITS(HDR, ROUTE_CARD_CPU);
- PRINTK_BITS(HDR, ROUTE_ENCRYPTION);
- PRINTK_BITS(HDR, ROUTE_TX);
- PRINTK_BITS(HDR, ROUTE_RX1);
- PRINTK_BITS(HDR, ROUTE_RX2);
- PRINTK_BITS(HDR, ROUTE_COMPRESSION);
-
- PRINTK_BE32(HDR, hdr->_11g0);
- PRINTK_BE32(HDR, hdr->_11g1);
- PRINTK_BE32(HDR, hdr->_11b0);
- PRINTK_BE32(HDR, hdr->_11b1);
-
- dump_ieee80211b_phy_hdr(hdr->_11b0, hdr->_11b1);
-
- /* Fixme */
- for (i = 0; i < ARRAY_SIZE(hdr->mac_hdr); i++) {
- if (i == 0)
- printk(KERN_DEBUG PFX "IEEE80211 HDR: ");
- printk("%.2x ", hdr->mac_hdr[i]);
- if (i + 1 == ARRAY_SIZE(hdr->mac_hdr))
- printk("\n");
- }
-
- PRINTK_BE16(HDR, hdr->rts_duration);
- PRINTK_BE16(HDR, hdr->last_duration);
- PRINTK_BE16(HDR, hdr->sec_last_duration);
- PRINTK_BE16(HDR, hdr->other_duration);
- PRINTK_BE16(HDR, hdr->tx_other_duration);
- PRINTK_BE16(HDR, hdr->last_11g_len);
- PRINTK_BE16(HDR, hdr->other_11g_len);
- PRINTK_BE16(HDR, hdr->last_11b_len);
- PRINTK_BE16(HDR, hdr->other_11b_len);
-
- /* FIXME */
- reg = be16_to_cpu(hdr->reg6);
- PRINTK_BITS(HDR, MBF);
- PRINTK_BITS(HDR, RSVD4);
-
- PRINTK_BE16(HDR, hdr->rx_frag_stat);
-
- PRINTK_BE32(HDR, hdr->time_stamp);
- PRINTK_BE32(HDR, hdr->phy_stats_hi);
- PRINTK_BE32(HDR, hdr->phy_stats_lo);
- PRINTK_BE32(HDR, hdr->mic_key0);
- PRINTK_BE32(HDR, hdr->mic_key1);
-} /* agnx_print_hdr */
-
-
-static inline void agnx_print_rx_hdr(struct agnx_hdr *hdr)
-{
- agnx_print_hdr(hdr);
-
- PRINTK_BE16(HDR, hdr->rx.rx_packet_duration);
- PRINTK_BE16(HDR, hdr->rx.replay_cnt);
-
- PRINTK_U8(HDR, hdr->rx_channel);
-}
-
-static inline void agnx_print_tx_hdr(struct agnx_hdr *hdr)
-{
- agnx_print_hdr(hdr);
-
- PRINTK_U8(HDR, hdr->tx.long_retry_limit);
- PRINTK_U8(HDR, hdr->tx.short_retry_limit);
- PRINTK_U8(HDR, hdr->tx.long_retry_cnt);
- PRINTK_U8(HDR, hdr->tx.short_retry_cnt);
-
- PRINTK_U8(HDR, hdr->rx_channel);
-}
-
-static inline void
-agnx_print_sta_power(struct agnx_priv *priv, unsigned int sta_idx)
-{
- struct agnx_sta_power power;
- u32 reg;
-
- get_sta_power(priv, &power, sta_idx);
-
- reg = le32_to_cpu(power.reg);
- PRINTK_BITS(STA_POWER, SIGNAL);
- PRINTK_BITS(STA_POWER, RATE);
- PRINTK_BITS(STA_POWER, TIFS);
- PRINTK_BITS(STA_POWER, EDCF);
- PRINTK_BITS(STA_POWER, CHANNEL_BOND);
- PRINTK_BITS(STA_POWER, PHY_MODE);
- PRINTK_BITS(STA_POWER, POWER_LEVEL);
- PRINTK_BITS(STA_POWER, NUM_TRANSMITTERS);
-}
-
-static inline void
-agnx_print_sta_tx_wq(struct agnx_priv *priv, unsigned int sta_idx, unsigned int wq_idx)
-{
- struct agnx_sta_tx_wq tx_wq;
- u32 reg;
-
- get_sta_tx_wq(priv, &tx_wq, sta_idx, wq_idx);
-
- reg = le32_to_cpu(tx_wq.reg0);
- PRINTK_BITS(STA_TX_WQ, TAIL_POINTER);
- PRINTK_BITS(STA_TX_WQ, HEAD_POINTER_LOW);
-
- reg = le32_to_cpu(tx_wq.reg3);
- PRINTK_BITS(STA_TX_WQ, HEAD_POINTER_HIGH);
- PRINTK_BITS(STA_TX_WQ, ACK_POINTER_LOW);
-
- reg = le32_to_cpu(tx_wq.reg1);
- PRINTK_BITS(STA_TX_WQ, ACK_POINTER_HIGH);
- PRINTK_BITS(STA_TX_WQ, HEAD_TIMOUT_TAIL_PACK_CNT);
- PRINTK_BITS(STA_TX_WQ, ACK_TIMOUT_TAIL_PACK_CNT);
-
- reg = le32_to_cpu(tx_wq.reg2);
- PRINTK_BITS(STA_TX_WQ, HEAD_TIMOUT_WIN_LIM_BYTE_CNT);
- PRINTK_BITS(STA_TX_WQ, HEAD_TIMOUT_WIN_LIM_FRAG_CNT);
- PRINTK_BITS(STA_TX_WQ, WORK_QUEUE_ACK_TYPE);
- PRINTK_BITS(STA_TX_WQ, WORK_QUEUE_VALID);
-}
-
-static inline void agnx_print_sta_traffic(struct agnx_sta_traffic *traffic)
-{
- u32 reg;
-
- reg = le32_to_cpu(traffic->reg0);
- PRINTK_BITS(STA_TRAFFIC, ACK_TIMOUT_CNT);
- PRINTK_BITS(STA_TRAFFIC, TRAFFIC_ACK_TYPE);
- PRINTK_BITS(STA_TRAFFIC, NEW_PACKET);
- PRINTK_BITS(STA_TRAFFIC, TRAFFIC_VALID);
- PRINTK_BITS(STA_TRAFFIC, RX_HDR_DESC_POINTER);
-
- reg = le32_to_cpu(traffic->reg1);
- PRINTK_BITS(STA_TRAFFIC, RX_PACKET_TIMESTAMP);
- PRINTK_BITS(STA_TRAFFIC, TRAFFIC_RESERVED);
- PRINTK_BITS(STA_TRAFFIC, SV);
- PRINTK_BITS(STA_TRAFFIC, RX_SEQUENCE_NUM);
-
- PRINTK_LE32(STA_TRAFFIC, traffic->tx_replay_cnt_low);
-
- PRINTK_LE16(STA_TRAFFIC, traffic->tx_replay_cnt_high);
- PRINTK_LE16(STA_TRAFFIC, traffic->rx_replay_cnt_high);
-
- PRINTK_LE32(STA_TRAFFIC, traffic->rx_replay_cnt_low);
-}
-
-static inline void agnx_print_sta(struct agnx_priv *priv, unsigned int sta_idx)
-{
- struct agnx_sta station;
- struct agnx_sta *sta = &station;
- u32 reg;
- unsigned int i;
-
- get_sta(priv, sta, sta_idx);
-
- for (i = 0; i < 4; i++)
- PRINTK_LE32(STA, sta->tx_session_keys[i]);
- for (i = 0; i < 4; i++)
- PRINTK_LE32(STA, sta->rx_session_keys[i]);
-
- reg = le32_to_cpu(sta->reg);
- PRINTK_BITS(STA, ID_1);
- PRINTK_BITS(STA, ID_0);
- PRINTK_BITS(STA, ENABLE_CONCATENATION);
- PRINTK_BITS(STA, ENABLE_DECOMPRESSION);
- PRINTK_BITS(STA, STA_RESERVED);
- PRINTK_BITS(STA, EAP);
- PRINTK_BITS(STA, ED_NULL);
- PRINTK_BITS(STA, ENCRYPTION_POLICY);
- PRINTK_BITS(STA, DEFINED_KEY_ID);
- PRINTK_BITS(STA, FIXED_KEY);
- PRINTK_BITS(STA, KEY_VALID);
- PRINTK_BITS(STA, STATION_VALID);
-
- PRINTK_LE32(STA, sta->tx_aes_blks_unicast);
- PRINTK_LE32(STA, sta->rx_aes_blks_unicast);
-
- PRINTK_LE16(STA, sta->aes_format_err_unicast_cnt);
- PRINTK_LE16(STA, sta->aes_replay_unicast);
-
- PRINTK_LE16(STA, sta->aes_decrypt_err_unicast);
- PRINTK_LE16(STA, sta->aes_decrypt_err_default);
-
- PRINTK_LE16(STA, sta->single_retry_packets);
- PRINTK_LE16(STA, sta->failed_tx_packets);
-
- PRINTK_LE16(STA, sta->muti_retry_packets);
- PRINTK_LE16(STA, sta->ack_timeouts);
-
- PRINTK_LE16(STA, sta->frag_tx_cnt);
- PRINTK_LE16(STA, sta->rts_brq_sent);
-
- PRINTK_LE16(STA, sta->tx_packets);
- PRINTK_LE16(STA, sta->cts_back_timeout);
-
- PRINTK_LE32(STA, sta->phy_stats_high);
- PRINTK_LE32(STA, sta->phy_stats_low);
-
- /* for (i = 0; i < 8; i++) */
- agnx_print_sta_traffic(sta->traffic + 0);
-
- PRINTK_LE16(STA, sta->traffic_class0_frag_success);
- PRINTK_LE16(STA, sta->traffic_class1_frag_success);
- PRINTK_LE16(STA, sta->traffic_class2_frag_success);
- PRINTK_LE16(STA, sta->traffic_class3_frag_success);
- PRINTK_LE16(STA, sta->traffic_class4_frag_success);
- PRINTK_LE16(STA, sta->traffic_class5_frag_success);
- PRINTK_LE16(STA, sta->traffic_class6_frag_success);
- PRINTK_LE16(STA, sta->traffic_class7_frag_success);
-
- PRINTK_LE16(STA, sta->num_frag_non_prime_rates);
- PRINTK_LE16(STA, sta->ack_timeout_non_prime_rates);
-}
-
-
-static inline void dump_ieee80211_hdr(struct ieee80211_hdr *hdr, char *tag)
-{
- u16 fctl;
- int hdrlen;
-
- fctl = le16_to_cpu(hdr->frame_control);
- switch (fctl & IEEE80211_FCTL_FTYPE) {
- case IEEE80211_FTYPE_DATA:
- printk(PFX "%s DATA ", tag);
- break;
- case IEEE80211_FTYPE_CTL:
- printk(PFX "%s CTL ", tag);
- break;
- case IEEE80211_FTYPE_MGMT:
- printk(PFX "%s MGMT ", tag);
- switch (fctl & IEEE80211_FCTL_STYPE) {
- case IEEE80211_STYPE_ASSOC_REQ:
- printk("SubType: ASSOC_REQ ");
- break;
- case IEEE80211_STYPE_ASSOC_RESP:
- printk("SubType: ASSOC_RESP ");
- break;
- case IEEE80211_STYPE_REASSOC_REQ:
- printk("SubType: REASSOC_REQ ");
- break;
- case IEEE80211_STYPE_REASSOC_RESP:
- printk("SubType: REASSOC_RESP ");
- break;
- case IEEE80211_STYPE_PROBE_REQ:
- printk("SubType: PROBE_REQ ");
- break;
- case IEEE80211_STYPE_PROBE_RESP:
- printk("SubType: PROBE_RESP ");
- break;
- case IEEE80211_STYPE_BEACON:
- printk("SubType: BEACON ");
- break;
- case IEEE80211_STYPE_ATIM:
- printk("SubType: ATIM ");
- break;
- case IEEE80211_STYPE_DISASSOC:
- printk("SubType: DISASSOC ");
- break;
- case IEEE80211_STYPE_AUTH:
- printk("SubType: AUTH ");
- break;
- case IEEE80211_STYPE_DEAUTH:
- printk("SubType: DEAUTH ");
- break;
- case IEEE80211_STYPE_ACTION:
- printk("SubType: ACTION ");
- break;
- default:
- printk("SubType: Unknow\n");
- }
- break;
- default:
- printk(PFX "%s Packet type: Unknow\n", tag);
- }
-
- hdrlen = ieee80211_hdrlen(fctl);
-
- if (hdrlen >= 4)
- printk("FC=0x%04x DUR=0x%04x",
- fctl, le16_to_cpu(hdr->duration_id));
- if (hdrlen >= 10)
- printk(" A1=%pM", hdr->addr1);
- if (hdrlen >= 16)
- printk(" A2=%pM", hdr->addr2);
- if (hdrlen >= 24)
- printk(" A3=%pM", hdr->addr3);
- if (hdrlen >= 30)
- printk(" A4=%pM", hdr->addr4);
- printk("\n");
-}
-
-static inline void dump_txm_registers(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- int i;
- for (i = 0; i <= 0x1e8; i += 4)
- printk(KERN_DEBUG PFX "TXM: %x---> 0x%.8x\n", i, ioread32(ctl + i));
-}
-static inline void dump_rxm_registers(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- int i;
- for (i = 0; i <= 0x108; i += 4)
- printk(KERN_DEBUG PFX "RXM: %x---> 0x%.8x\n", i, ioread32(ctl + 0x2000 + i));
-}
-static inline void dump_bm_registers(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- int i;
- for (i = 0; i <= 0x90; i += 4)
- printk(KERN_DEBUG PFX "BM: %x---> 0x%.8x\n", i, ioread32(ctl + 0x2c00 + i));
-}
-static inline void dump_cir_registers(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- int i;
- for (i = 0; i <= 0xb8; i += 4)
- printk(KERN_DEBUG PFX "CIR: %x---> 0x%.8x\n", i, ioread32(ctl + 0x3000 + i));
-}
-
-#endif /* AGNX_DEBUG_H_ */
+++ /dev/null
-/**
- * Airgo MIMO wireless driver
- *
- * Copyright (c) 2007 Li YanBo <dreamfly281@gmail.com>
-
- * Thanks for Jeff Williams <angelbane@gmail.com> do reverse engineer
- * works and published the SPECS at http://airgo.wdwconsulting.net/mymoin
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/etherdevice.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-#include "agnx.h"
-#include "debug.h"
-#include "xmit.h"
-#include "phy.h"
-
-MODULE_AUTHOR("Li YanBo <dreamfly281@gmail.com>");
-MODULE_DESCRIPTION("Airgo MIMO PCI wireless driver");
-MODULE_LICENSE("GPL");
-
-static struct pci_device_id agnx_pci_id_tbl[] __devinitdata = {
- { PCI_DEVICE(0x17cb, 0x0001) }, /* Beklin F5d8010, Netgear WGM511 etc */
- { PCI_DEVICE(0x17cb, 0x0002) }, /* Netgear Wpnt511 */
- { 0 }
-};
-
-MODULE_DEVICE_TABLE(pci, agnx_pci_id_tbl);
-
-
-static inline void agnx_interrupt_ack(struct agnx_priv *priv, u32 *reason)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- if (*reason & AGNX_STAT_RX) {
- /* Mark complete RX */
- reg = ioread32(ctl + AGNX_CIR_RXCTL);
- reg |= 0x4;
- iowrite32(reg, ctl + AGNX_CIR_RXCTL);
- /* disable Rx interrupt */
- }
- if (*reason & AGNX_STAT_TX) {
- reg = ioread32(ctl + AGNX_CIR_TXDCTL);
- if (reg & 0x4) {
- iowrite32(reg, ctl + AGNX_CIR_TXDCTL);
- *reason |= AGNX_STAT_TXD;
- }
- reg = ioread32(ctl + AGNX_CIR_TXMCTL);
- if (reg & 0x4) {
- iowrite32(reg, ctl + AGNX_CIR_TXMCTL);
- *reason |= AGNX_STAT_TXM;
- }
- }
-#if 0
- if (*reason & AGNX_STAT_X) {
- reg = ioread32(ctl + AGNX_INT_STAT);
- iowrite32(reg, ctl + AGNX_INT_STAT);
- /* FIXME reinit interrupt mask */
- reg = 0xc390bf9 & ~IRQ_TX_BEACON;
- reg &= ~IRQ_TX_DISABLE;
- iowrite32(reg, ctl + AGNX_INT_MASK);
- iowrite32(0x800, ctl + AGNX_CIR_BLKCTL);
- }
-#endif
-} /* agnx_interrupt_ack */
-
-static irqreturn_t agnx_interrupt_handler(int irq, void *dev_id)
-{
- struct ieee80211_hw *dev = dev_id;
- struct agnx_priv *priv = dev->priv;
- void __iomem *ctl = priv->ctl;
- irqreturn_t ret = IRQ_NONE;
- u32 irq_reason;
-
- spin_lock(&priv->lock);
-
-/* printk(KERN_ERR PFX "Get a interrupt %s\n", __func__); */
-
- if (priv->init_status != AGNX_START)
- goto out;
-
- /* FiXME Here has no lock, Is this will lead to race? */
- irq_reason = ioread32(ctl + AGNX_CIR_BLKCTL);
- if (!(irq_reason & 0x7))
- goto out;
-
- ret = IRQ_HANDLED;
- priv->irq_status = ioread32(ctl + AGNX_INT_STAT);
-
-/* printk(PFX "Interrupt reason is 0x%x\n", irq_reason); */
- /* Make sure the txm and txd flags don't conflict with other unknown
- interrupt flag, maybe is not necessary */
- irq_reason &= 0xF;
-
- disable_rx_interrupt(priv);
- /* TODO Make sure the card finished initialized */
- agnx_interrupt_ack(priv, &irq_reason);
-
- if (irq_reason & AGNX_STAT_RX)
- handle_rx_irq(priv);
- if (irq_reason & AGNX_STAT_TXD)
- handle_txd_irq(priv);
- if (irq_reason & AGNX_STAT_TXM)
- handle_txm_irq(priv);
- if (irq_reason & AGNX_STAT_X)
- handle_other_irq(priv);
-
- enable_rx_interrupt(priv);
-out:
- spin_unlock(&priv->lock);
- return ret;
-} /* agnx_interrupt_handler */
-
-
-/* FIXME */
-static int agnx_tx(struct ieee80211_hw *dev, struct sk_buff *skb)
-{
- AGNX_TRACE;
- return _agnx_tx(dev->priv, skb);
-} /* agnx_tx */
-
-
-static int agnx_get_mac_address(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- /* Attention! directly read the MAC or other date from EEPROM will
- lead to cardbus(WGM511) lock up when write to PM PLL register */
- reg = agnx_read32(ctl, 0x3544);
- udelay(40);
- reg = agnx_read32(ctl, 0x354c);
- udelay(50);
- /* Get the mac address */
- reg = agnx_read32(ctl, 0x3544);
- udelay(40);
-
- /* HACK */
- reg = cpu_to_le32(reg);
- priv->mac_addr[0] = ((u8 *)®)[2];
- priv->mac_addr[1] = ((u8 *)®)[3];
- reg = agnx_read32(ctl, 0x3548);
- udelay(50);
- *((u32 *)(priv->mac_addr + 2)) = cpu_to_le32(reg);
-
- if (!is_valid_ether_addr(priv->mac_addr)) {
- printk(KERN_WARNING PFX "read mac %pM\n", priv->mac_addr);
- printk(KERN_WARNING PFX "Invalid hwaddr! Using random hwaddr\n");
- random_ether_addr(priv->mac_addr);
- }
-
- return 0;
-} /* agnx_get_mac_address */
-
-static int agnx_alloc_rings(struct agnx_priv *priv)
-{
- unsigned int len;
- AGNX_TRACE;
-
- /* Allocate RX/TXM/TXD rings info */
- priv->rx.size = AGNX_RX_RING_SIZE;
- priv->txm.size = AGNX_TXM_RING_SIZE;
- priv->txd.size = AGNX_TXD_RING_SIZE;
-
- len = priv->rx.size + priv->txm.size + priv->txd.size;
-
-/* priv->rx.info = kzalloc(sizeof(struct agnx_info) * len, GFP_KERNEL); */
- priv->rx.info = kzalloc(sizeof(struct agnx_info) * len, GFP_ATOMIC);
- if (!priv->rx.info)
- return -ENOMEM;
- priv->txm.info = priv->rx.info + priv->rx.size;
- priv->txd.info = priv->txm.info + priv->txm.size;
-
- /* Allocate RX/TXM/TXD descriptors */
- priv->rx.desc = pci_alloc_consistent(priv->pdev, sizeof(struct agnx_desc) * len,
- &priv->rx.dma);
- if (!priv->rx.desc) {
- kfree(priv->rx.info);
- return -ENOMEM;
- }
-
- priv->txm.desc = priv->rx.desc + priv->rx.size;
- priv->txm.dma = priv->rx.dma + sizeof(struct agnx_desc) * priv->rx.size;
- priv->txd.desc = priv->txm.desc + priv->txm.size;
- priv->txd.dma = priv->txm.dma + sizeof(struct agnx_desc) * priv->txm.size;
-
- return 0;
-} /* agnx_alloc_rings */
-
-static void rings_free(struct agnx_priv *priv)
-{
- unsigned int len = priv->rx.size + priv->txm.size + priv->txd.size;
- unsigned long flags;
- AGNX_TRACE;
-
- spin_lock_irqsave(&priv->lock, flags);
- kfree(priv->rx.info);
- pci_free_consistent(priv->pdev, sizeof(struct agnx_desc) * len,
- priv->rx.desc, priv->rx.dma);
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-#if 0
-static void agnx_periodic_work_handler(struct work_struct *work)
-{
- struct agnx_priv *priv = container_of(work, struct agnx_priv, periodic_work.work);
-/* unsigned long flags; */
- unsigned long delay;
-
- /* fixme: using mutex?? */
-/* spin_lock_irqsave(&priv->lock, flags); */
-
- /* TODO Recalibrate*/
-/* calibrate_oscillator(priv); */
-/* antenna_calibrate(priv); */
-/* agnx_send_packet(priv, 997); */
- /* FIXME */
-/* if (debug == 3) */
-/* delay = msecs_to_jiffies(AGNX_PERIODIC_DELAY); */
-/* else */
- delay = msecs_to_jiffies(AGNX_PERIODIC_DELAY);
-/* delay = round_jiffies(HZ * 15); */
-
- queue_delayed_work(priv->hw->workqueue, &priv->periodic_work, delay);
-
-/* spin_unlock_irqrestore(&priv->lock, flags); */
-}
-#endif
-
-static int agnx_start(struct ieee80211_hw *dev)
-{
- struct agnx_priv *priv = dev->priv;
- /* unsigned long delay; */
- int err = 0;
- AGNX_TRACE;
-
- err = agnx_alloc_rings(priv);
- if (err) {
- printk(KERN_ERR PFX "Can't alloc RX/TXM/TXD rings\n");
- goto out;
- }
- err = request_irq(priv->pdev->irq, &agnx_interrupt_handler,
- IRQF_SHARED, "agnx_pci", dev);
- if (err) {
- printk(KERN_ERR PFX "Failed to register IRQ handler\n");
- rings_free(priv);
- goto out;
- }
-
-/* mdelay(500); */
-
- might_sleep();
- agnx_hw_init(priv);
-
-/* mdelay(500); */
- might_sleep();
-
- priv->init_status = AGNX_START;
-/* INIT_DELAYED_WORK(&priv->periodic_work, agnx_periodic_work_handler); */
-/* delay = msecs_to_jiffies(AGNX_PERIODIC_DELAY); */
-/* queue_delayed_work(priv->hw->workqueue, &priv->periodic_work, delay); */
-out:
- return err;
-} /* agnx_start */
-
-static void agnx_stop(struct ieee80211_hw *dev)
-{
- struct agnx_priv *priv = dev->priv;
- AGNX_TRACE;
-
- priv->init_status = AGNX_STOP;
- /* make sure hardware will not generate irq */
- agnx_hw_reset(priv);
- free_irq(priv->pdev->irq, dev);
-/* flush_workqueue(priv->hw->workqueue); */
-/* cancel_delayed_work_sync(&priv->periodic_work); */
- unfill_rings(priv);
- rings_free(priv);
-}
-
-static int agnx_config(struct ieee80211_hw *dev, u32 changed)
-{
- struct agnx_priv *priv = dev->priv;
- struct ieee80211_conf *conf = &dev->conf;
- int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
- AGNX_TRACE;
-
- spin_lock(&priv->lock);
- /* FIXME need priv lock? */
- if (channel != priv->channel) {
- priv->channel = channel;
- agnx_set_channel(priv, priv->channel);
- }
-
- spin_unlock(&priv->lock);
- return 0;
-}
-
-static void agnx_bss_info_changed(struct ieee80211_hw *dev,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *conf,
- u32 changed)
-{
- struct agnx_priv *priv = dev->priv;
- void __iomem *ctl = priv->ctl;
- AGNX_TRACE;
-
- if (!(changed & BSS_CHANGED_BSSID))
- return;
-
- spin_lock(&priv->lock);
-
- if (memcmp(conf->bssid, priv->bssid, ETH_ALEN)) {
- agnx_set_bssid(priv, conf->bssid);
- memcpy(priv->bssid, conf->bssid, ETH_ALEN);
- hash_write(priv, conf->bssid, BSSID_STAID);
- sta_init(priv, BSSID_STAID);
- /* FIXME needed? */
- sta_power_init(priv, BSSID_STAID);
- agnx_write32(ctl, AGNX_BM_MTSM, 0xff & ~0x1);
- }
- spin_unlock(&priv->lock);
-} /* agnx_bss_info_changed */
-
-
-static void agnx_configure_filter(struct ieee80211_hw *dev,
- unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count, struct dev_mc_list *mclist)
-{
- unsigned int new_flags = 0;
-
- *total_flags = new_flags;
- /* TODO */
-}
-
-static int agnx_add_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
-{
- struct agnx_priv *priv = dev->priv;
- AGNX_TRACE;
-
- spin_lock(&priv->lock);
- /* FIXME */
- if (priv->mode != NL80211_IFTYPE_MONITOR)
- return -EOPNOTSUPP;
-
- switch (conf->type) {
- case NL80211_IFTYPE_STATION:
- priv->mode = conf->type;
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- spin_unlock(&priv->lock);
-
- return 0;
-}
-
-static void agnx_remove_interface(struct ieee80211_hw *dev,
- struct ieee80211_if_init_conf *conf)
-{
- struct agnx_priv *priv = dev->priv;
- AGNX_TRACE;
-
- /* TODO */
- priv->mode = NL80211_IFTYPE_MONITOR;
-}
-
-static int agnx_get_stats(struct ieee80211_hw *dev,
- struct ieee80211_low_level_stats *stats)
-{
- struct agnx_priv *priv = dev->priv;
- AGNX_TRACE;
- spin_lock(&priv->lock);
- /* TODO !! */
- memcpy(stats, &priv->stats, sizeof(*stats));
- spin_unlock(&priv->lock);
-
- return 0;
-}
-
-static u64 agnx_get_tsft(struct ieee80211_hw *dev)
-{
- void __iomem *ctl = ((struct agnx_priv *)dev->priv)->ctl;
- u32 tsftl;
- u64 tsft;
- AGNX_TRACE;
-
- /* FIXME */
- tsftl = ioread32(ctl + AGNX_TXM_TIMESTAMPLO);
- tsft = ioread32(ctl + AGNX_TXM_TIMESTAMPHI);
- tsft <<= 32;
- tsft |= tsftl;
-
- return tsft;
-}
-
-static int agnx_get_tx_stats(struct ieee80211_hw *dev,
- struct ieee80211_tx_queue_stats *stats)
-{
- struct agnx_priv *priv = dev->priv;
- AGNX_TRACE;
-
- /* FIXME now we just using txd queue, but should using txm queue too */
- stats[0].len = (priv->txd.idx - priv->txd.idx_sent) / 2;
- stats[0].limit = priv->txd.size - 2;
- stats[0].count = priv->txd.idx / 2;
-
- return 0;
-}
-
-static struct ieee80211_ops agnx_ops = {
- .tx = agnx_tx,
- .start = agnx_start,
- .stop = agnx_stop,
- .add_interface = agnx_add_interface,
- .remove_interface = agnx_remove_interface,
- .config = agnx_config,
- .bss_info_changed = agnx_bss_info_changed,
- .configure_filter = agnx_configure_filter,
- .get_stats = agnx_get_stats,
- .get_tx_stats = agnx_get_tx_stats,
- .get_tsf = agnx_get_tsft
-};
-
-static void __devexit agnx_pci_remove(struct pci_dev *pdev)
-{
- struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- struct agnx_priv *priv;
- AGNX_TRACE;
-
- if (!dev)
- return;
- priv = dev->priv;
- ieee80211_unregister_hw(dev);
- pci_iounmap(pdev, priv->ctl);
- pci_iounmap(pdev, priv->data);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
-
- ieee80211_free_hw(dev);
-}
-
-static int __devinit agnx_pci_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- struct ieee80211_hw *dev;
- struct agnx_priv *priv;
- int err;
-
- err = pci_enable_device(pdev);
- if (err) {
- dev_err(&pdev->dev, "can't enable pci device\n");
- return err;
- }
-
- err = pci_request_regions(pdev, "agnx-pci");
- if (err) {
- dev_err(&pdev->dev, "can't reserve PCI resources\n");
- return err;
- }
-
- if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
- pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
- dev_err(&pdev->dev, "no suitable DMA available\n");
- err = -EIO;
- goto err_free_reg;
- }
-
- pci_set_master(pdev);
-
- dev = ieee80211_alloc_hw(sizeof(*priv), &agnx_ops);
- if (!dev) {
- dev_err(&pdev->dev, "ieee80211 alloc failed\n");
- err = -ENOMEM;
- goto err_free_reg;
- }
- priv = dev->priv;
- memset(priv, 0, sizeof(*priv));
- priv->mode = NL80211_IFTYPE_MONITOR;
- priv->pdev = pdev;
- priv->hw = dev;
- spin_lock_init(&priv->lock);
- priv->init_status = AGNX_UNINIT;
-
- priv->ctl = pci_iomap(pdev, 0, 0);
-/* dev_dbg(&pdev->dev, "MEM1 mapped address is 0x%p\n", priv->ctl); */
- if (!priv->ctl) {
- dev_err(&pdev->dev, "can't map device memory\n");
- err = -ENOMEM;
- goto err_free_dev;
- }
- priv->data = pci_iomap(pdev, 1, 0);
- if (!priv->data) {
- dev_err(&pdev->dev, "can't map device memory\n");
- err = -ENOMEM;
- goto err_iounmap2;
- }
-
- pci_read_config_byte(pdev, PCI_REVISION_ID, &priv->revid);
-
- priv->band.channels = (struct ieee80211_channel *)agnx_channels;
- priv->band.n_channels = ARRAY_SIZE(agnx_channels);
- priv->band.bitrates = (struct ieee80211_rate *)agnx_rates_80211g;
- priv->band.n_bitrates = ARRAY_SIZE(agnx_rates_80211g);
-
- /* Init ieee802.11 dev */
- SET_IEEE80211_DEV(dev, &pdev->dev);
- pci_set_drvdata(pdev, dev);
- dev->extra_tx_headroom = sizeof(struct agnx_hdr);
-
- /* FIXME It only include FCS in promious mode but not manage mode */
-/* dev->flags = IEEE80211_HW_RX_INCLUDES_FCS; */
- dev->channel_change_time = 5000;
- dev->max_signal = 100;
- /* FIXME */
- dev->queues = 1;
-
- agnx_get_mac_address(priv);
-
- SET_IEEE80211_PERM_ADDR(dev, priv->mac_addr);
-
-/* /\* FIXME *\/ */
-/* for (i = 1; i < NUM_DRIVE_MODES; i++) { */
-/* err = ieee80211_register_hwmode(dev, &priv->modes[i]); */
-/* if (err) { */
-/* printk(KERN_ERR PFX "Can't register hwmode\n"); */
-/* goto err_iounmap; */
-/* } */
-/* } */
-
- priv->channel = 1;
- dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band;
-
- err = ieee80211_register_hw(dev);
- if (err) {
- dev_err(&pdev->dev, "can't register hardware\n");
- goto err_iounmap;
- }
-
- agnx_hw_reset(priv);
-
- dev_info(&pdev->dev, "%s: hwaddr %pM, Rev 0x%02x\n",
- wiphy_name(dev->wiphy),
- dev->wiphy->perm_addr, priv->revid);
- return 0;
-
- err_iounmap:
- pci_iounmap(pdev, priv->data);
-
- err_iounmap2:
- pci_iounmap(pdev, priv->ctl);
-
- err_free_dev:
- pci_set_drvdata(pdev, NULL);
- ieee80211_free_hw(dev);
-
- err_free_reg:
- pci_release_regions(pdev);
-
- pci_disable_device(pdev);
- return err;
-} /* agnx_pci_probe*/
-
-#ifdef CONFIG_PM
-
-static int agnx_pci_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- AGNX_TRACE;
-
- ieee80211_stop_queues(dev);
- agnx_stop(dev);
-
- pci_save_state(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
- return 0;
-}
-
-static int agnx_pci_resume(struct pci_dev *pdev)
-{
- struct ieee80211_hw *dev = pci_get_drvdata(pdev);
- AGNX_TRACE;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
-
- agnx_start(dev);
- ieee80211_wake_queues(dev);
-
- return 0;
-}
-
-#else
-
-#define agnx_pci_suspend NULL
-#define agnx_pci_resume NULL
-
-#endif /* CONFIG_PM */
-
-
-static struct pci_driver agnx_pci_driver = {
- .name = "agnx-pci",
- .id_table = agnx_pci_id_tbl,
- .probe = agnx_pci_probe,
- .remove = __devexit_p(agnx_pci_remove),
- .suspend = agnx_pci_suspend,
- .resume = agnx_pci_resume,
-};
-
-static int __init agnx_pci_init(void)
-{
- AGNX_TRACE;
- return pci_register_driver(&agnx_pci_driver);
-}
-
-static void __exit agnx_pci_exit(void)
-{
- AGNX_TRACE;
- pci_unregister_driver(&agnx_pci_driver);
-}
-
-
-module_init(agnx_pci_init);
-module_exit(agnx_pci_exit);
+++ /dev/null
-/**
- * Airgo MIMO wireless driver
- *
- * Copyright (c) 2007 Li YanBo <dreamfly281@gmail.com>
-
- * Thanks for Jeff Williams <angelbane@gmail.com> do reverse engineer
- * works and published the SPECS at http://airgo.wdwconsulting.net/mymoin
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/etherdevice.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "agnx.h"
-#include "debug.h"
-#include "phy.h"
-#include "table.h"
-#include "sta.h"
-#include "xmit.h"
-
-u8 read_from_eeprom(struct agnx_priv *priv, u16 address)
-{
- void __iomem *ctl = priv->ctl;
- struct agnx_eeprom cmd;
- u32 reg;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.cmd = EEPROM_CMD_READ << AGNX_EEPROM_COMMAND_SHIFT;
- cmd.address = address;
- /* Verify that the Status bit is clear */
- /* Read Command and Address are written to the Serial Interface */
- iowrite32(*(__le32 *)&cmd, ctl + AGNX_CIR_SERIALITF);
- /* Wait for the Status bit to clear again */
- eeprom_delay();
- /* Read from Data */
- reg = ioread32(ctl + AGNX_CIR_SERIALITF);
-
- cmd = *(struct agnx_eeprom *)®
-
- return cmd.data;
-}
-
-static int card_full_reset(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- reg = agnx_read32(ctl, AGNX_CIR_BLKCTL);
- agnx_write32(ctl, AGNX_CIR_BLKCTL, 0x80);
- reg = agnx_read32(ctl, AGNX_CIR_BLKCTL);
- return 0;
-}
-
-inline void enable_power_saving(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg &= ~0x8;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-}
-
-inline void disable_power_saving(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-}
-
-
-void disable_receiver(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- AGNX_TRACE;
-
- /* FIXME Disable the receiver */
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x0);
- /* Set gain control reset */
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
- /* Reset gain control reset */
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-}
-
-
-/* Fixme this shoule be disable RX, above is enable RX */
-void enable_receiver(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- AGNX_TRACE;
-
- /* Set adaptive gain control discovery mode */
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
- /* Set gain control reset */
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
- /* Clear gain control reset */
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-}
-
-static void mac_address_set(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u8 *mac_addr = priv->mac_addr;
- u32 reg;
-
- /* FIXME */
- reg = (mac_addr[0] << 24) | (mac_addr[1] << 16) | mac_addr[2] << 8 | mac_addr[3];
- iowrite32(reg, ctl + AGNX_RXM_MACHI);
- reg = (mac_addr[4] << 8) | mac_addr[5];
- iowrite32(reg, ctl + AGNX_RXM_MACLO);
-}
-
-static void receiver_bssid_set(struct agnx_priv *priv, const u8 *bssid)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- disable_receiver(priv);
- /* FIXME */
- reg = bssid[0] << 24 | (bssid[1] << 16) | (bssid[2] << 8) | bssid[3];
- iowrite32(reg, ctl + AGNX_RXM_BSSIDHI);
- reg = (bssid[4] << 8) | bssid[5];
- iowrite32(reg, ctl + AGNX_RXM_BSSIDLO);
-
- /* Enable the receiver */
- enable_receiver(priv);
-
- /* Clear the TSF */
-/* agnx_write32(ctl, AGNX_TXM_TSFLO, 0x0); */
-/* agnx_write32(ctl, AGNX_TXM_TSFHI, 0x0); */
- /* Clear the TBTT */
- agnx_write32(ctl, AGNX_TXM_TBTTLO, 0x0);
- agnx_write32(ctl, AGNX_TXM_TBTTHI, 0x0);
- disable_receiver(priv);
-} /* receiver_bssid_set */
-
-static void band_management_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- void __iomem *data = priv->data;
- u32 reg;
- int i;
- AGNX_TRACE;
-
- agnx_write32(ctl, AGNX_BM_TXWADDR, AGNX_PDU_TX_WQ);
- agnx_write32(ctl, AGNX_CIR_ADDRWIN, 0x0);
- memset_io(data + AGNX_PDUPOOL, 0x0, AGNX_PDUPOOL_SIZE);
- agnx_write32(ctl, AGNX_BM_BMCTL, 0x200);
-
- agnx_write32(ctl, AGNX_BM_CIPDUWCNT, 0x40);
- agnx_write32(ctl, AGNX_BM_SPPDUWCNT, 0x2);
- agnx_write32(ctl, AGNX_BM_RFPPDUWCNT, 0x0);
- agnx_write32(ctl, AGNX_BM_RHPPDUWCNT, 0x22);
-
- /* FIXME Initialize the Free Pool Linked List */
- /* 1. Write the Address of the Next Node ((0x41800 + node*size)/size)
- to the first word of each node. */
- for (i = 0; i < PDU_FREE_CNT; i++) {
- iowrite32((AGNX_PDU_FREE + (i+1)*PDU_SIZE)/PDU_SIZE,
- data + AGNX_PDU_FREE + (PDU_SIZE * i));
- /* The last node should be set to 0x0 */
- if ((i + 1) == PDU_FREE_CNT)
- memset_io(data + AGNX_PDU_FREE + (PDU_SIZE * i),
- 0x0, PDU_SIZE);
- }
-
- /* Head is First Pool address (0x41800) / size (0x80) */
- agnx_write32(ctl, AGNX_BM_FPLHP, AGNX_PDU_FREE/PDU_SIZE);
- /* Tail is Last Pool Address (0x47f80) / size (0x80) */
- agnx_write32(ctl, AGNX_BM_FPLTP, 0x47f80/PDU_SIZE);
- /* Count is Number of Nodes in the Pool (0xd0) */
- agnx_write32(ctl, AGNX_BM_FPCNT, PDU_FREE_CNT);
-
- /* Start all workqueue */
- agnx_write32(ctl, AGNX_BM_CIWQCTL, 0x80000);
- agnx_write32(ctl, AGNX_BM_CPULWCTL, 0x80000);
- agnx_write32(ctl, AGNX_BM_CPUHWCTL, 0x80000);
- agnx_write32(ctl, AGNX_BM_CPUTXWCTL, 0x80000);
- agnx_write32(ctl, AGNX_BM_CPURXWCTL, 0x80000);
- agnx_write32(ctl, AGNX_BM_SPRXWCTL, 0x80000);
- agnx_write32(ctl, AGNX_BM_SPTXWCTL, 0x80000);
- agnx_write32(ctl, AGNX_BM_RFPWCTL, 0x80000);
-
- /* Enable the Band Management */
- reg = agnx_read32(ctl, AGNX_BM_BMCTL);
- reg |= 0x1;
- agnx_write32(ctl, AGNX_BM_BMCTL, reg);
-} /* band_managment_init */
-
-
-static void system_itf_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- agnx_write32(ctl, AGNX_SYSITF_GPIOUT, 0x0);
- agnx_write32(ctl, AGNX_PM_TESTPHY, 0x11e143a);
-
- if (priv->revid == 0) {
- reg = agnx_read32(ctl, AGNX_SYSITF_SYSMODE);
- reg |= 0x11;
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, reg);
- }
- /* ??? What is that means? it should difference for differice type
- of cards */
- agnx_write32(ctl, AGNX_CIR_SERIALITF, 0xfff81006);
-
- agnx_write32(ctl, AGNX_SYSITF_GPIOIN, 0x1f0000);
- agnx_write32(ctl, AGNX_SYSITF_GPIOUT, 0x5);
- reg = agnx_read32(ctl, AGNX_SYSITF_GPIOIN);
-}
-
-static void encryption_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- AGNX_TRACE;
-
- agnx_write32(ctl, AGNX_ENCRY_WEPKEY0, 0x0);
- agnx_write32(ctl, AGNX_ENCRY_WEPKEY1, 0x0);
- agnx_write32(ctl, AGNX_ENCRY_WEPKEY2, 0x0);
- agnx_write32(ctl, AGNX_ENCRY_WEPKEY3, 0x0);
- agnx_write32(ctl, AGNX_ENCRY_CCMRECTL, 0x8);
-}
-
-static void tx_management_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- void __iomem *data = priv->data;
- u32 reg;
- AGNX_TRACE;
-
- /* Fill out the ComputationalEngineLookupTable
- * starting at memory #2 offset 0x800
- */
- tx_engine_lookup_tbl_init(priv);
- memset_io(data + 0x1000, 0, 0xfe0);
- /* Enable Transmission Management Functions */
- agnx_write32(ctl, AGNX_TXM_ETMF, 0x3ff);
- /* Write 0x3f to Transmission Template */
- agnx_write32(ctl, AGNX_TXM_TXTEMP, 0x3f);
-
- if (priv->revid >= 2)
- agnx_write32(ctl, AGNX_TXM_SIFSPIFS, 0x1e140a0b);
- else
- agnx_write32(ctl, AGNX_TXM_SIFSPIFS, 0x1e190a0b);
-
- reg = agnx_read32(ctl, AGNX_TXM_TIFSEIFS);
- reg &= 0xff00;
- reg |= 0xb;
- agnx_write32(ctl, AGNX_TXM_TIFSEIFS, reg);
- reg = agnx_read32(ctl, AGNX_TXM_TIFSEIFS);
- reg &= 0xffff00ff;
- reg |= 0xa00;
- agnx_write32(ctl, AGNX_TXM_TIFSEIFS, reg);
- /* Enable TIFS */
- agnx_write32(ctl, AGNX_TXM_CTL, 0x40000);
-
- reg = agnx_read32(ctl, AGNX_TXM_TIFSEIFS);
- reg &= 0xff00ffff;
- reg |= 0x510000;
- agnx_write32(ctl, AGNX_TXM_TIFSEIFS, reg);
- reg = agnx_read32(ctl, AGNX_TXM_PROBDELAY);
- reg &= 0xff00ffff;
- agnx_write32(ctl, AGNX_TXM_PROBDELAY, reg);
- reg = agnx_read32(ctl, AGNX_TXM_TIFSEIFS);
- reg &= 0x00ffffff;
- reg |= 0x1c000000;
- agnx_write32(ctl, AGNX_TXM_TIFSEIFS, reg);
- reg = agnx_read32(ctl, AGNX_TXM_PROBDELAY);
- reg &= 0x00ffffff;
- reg |= 0x01000000;
- agnx_write32(ctl, AGNX_TXM_PROBDELAY, reg);
-
- /* # Set DIF 0-1,2-3,4-5,6-7 to defaults */
- agnx_write32(ctl, AGNX_TXM_DIF01, 0x321d321d);
- agnx_write32(ctl, AGNX_TXM_DIF23, 0x321d321d);
- agnx_write32(ctl, AGNX_TXM_DIF45, 0x321d321d);
- agnx_write32(ctl, AGNX_TXM_DIF67, 0x321d321d);
-
- /* Max Ack timeout limit */
- agnx_write32(ctl, AGNX_TXM_MAXACKTIM, 0x1e19);
- /* Max RX Data Timeout count, */
- reg = agnx_read32(ctl, AGNX_TXM_MAXRXTIME);
- reg &= 0xffff0000;
- reg |= 0xff;
- agnx_write32(ctl, AGNX_TXM_MAXRXTIME, reg);
-
- /* CF poll RX Timeout count */
- reg = agnx_read32(ctl, AGNX_TXM_CFPOLLRXTIM);
- reg &= 0xffff;
- reg |= 0xff0000;
- agnx_write32(ctl, AGNX_TXM_CFPOLLRXTIM, reg);
-
- /* Max Timeout Exceeded count, */
- reg = agnx_read32(ctl, AGNX_TXM_MAXTIMOUT);
- reg &= 0xff00ffff;
- reg |= 0x190000;
- agnx_write32(ctl, AGNX_TXM_MAXTIMOUT, reg);
-
- /* CF ack timeout limit for 11b */
- reg = agnx_read32(ctl, AGNX_TXM_CFACKT11B);
- reg &= 0xff00;
- reg |= 0x1e;
- agnx_write32(ctl, AGNX_TXM_CFACKT11B, reg);
-
- /* Max CF Poll Timeout Count */
- reg = agnx_read32(ctl, AGNX_TXM_CFPOLLRXTIM);
- reg &= 0xffff0000;
- reg |= 0x19;
- agnx_write32(ctl, AGNX_TXM_CFPOLLRXTIM, reg);
- /* CF Poll RX Timeout Count */
- reg = agnx_read32(ctl, AGNX_TXM_CFPOLLRXTIM);
- reg &= 0xffff0000;
- reg |= 0x1e;
- agnx_write32(ctl, AGNX_TXM_CFPOLLRXTIM, reg);
-
- /* # write default to */
- /* 1. Schedule Empty Count */
- agnx_write32(ctl, AGNX_TXM_SCHEMPCNT, 0x5);
- /* 2. CFP Period Count */
- agnx_write32(ctl, AGNX_TXM_CFPERCNT, 0x1);
- /* 3. CFP MDV */
- agnx_write32(ctl, AGNX_TXM_CFPMDV, 0x10000);
-
- /* Probe Delay */
- reg = agnx_read32(ctl, AGNX_TXM_PROBDELAY);
- reg &= 0xffff0000;
- reg |= 0x400;
- agnx_write32(ctl, AGNX_TXM_PROBDELAY, reg);
-
- /* Max CCA count Slot */
- reg = agnx_read32(ctl, AGNX_TXM_MAXCCACNTSLOT);
- reg &= 0xffff00ff;
- reg |= 0x900;
- agnx_write32(ctl, AGNX_TXM_MAXCCACNTSLOT, reg);
-
- /* Slot limit/1 msec Limit */
- reg = agnx_read32(ctl, AGNX_TXM_SLOTLIMIT);
- reg &= 0xff00ffff;
- reg |= 0x140077;
- agnx_write32(ctl, AGNX_TXM_SLOTLIMIT, reg);
-
- /* # Set CW #(0-7) to default */
- agnx_write32(ctl, AGNX_TXM_CW0, 0xff0007);
- agnx_write32(ctl, AGNX_TXM_CW1, 0xff0007);
- agnx_write32(ctl, AGNX_TXM_CW2, 0xff0007);
- agnx_write32(ctl, AGNX_TXM_CW3, 0xff0007);
- agnx_write32(ctl, AGNX_TXM_CW4, 0xff0007);
- agnx_write32(ctl, AGNX_TXM_CW5, 0xff0007);
- agnx_write32(ctl, AGNX_TXM_CW6, 0xff0007);
- agnx_write32(ctl, AGNX_TXM_CW7, 0xff0007);
-
- /* # Set Short/Long limit #(0-7) to default */
- agnx_write32(ctl, AGNX_TXM_SLBEALIM0, 0xa000a);
- agnx_write32(ctl, AGNX_TXM_SLBEALIM1, 0xa000a);
- agnx_write32(ctl, AGNX_TXM_SLBEALIM2, 0xa000a);
- agnx_write32(ctl, AGNX_TXM_SLBEALIM3, 0xa000a);
- agnx_write32(ctl, AGNX_TXM_SLBEALIM4, 0xa000a);
- agnx_write32(ctl, AGNX_TXM_SLBEALIM5, 0xa000a);
- agnx_write32(ctl, AGNX_TXM_SLBEALIM6, 0xa000a);
- agnx_write32(ctl, AGNX_TXM_SLBEALIM7, 0xa000a);
-
- reg = agnx_read32(ctl, AGNX_TXM_CTL);
- reg |= 0x1400;
- agnx_write32(ctl, AGNX_TXM_CTL, reg);
- /* Wait for bit 0 in Control Reg to clear */
- udelay(80);
- reg = agnx_read32(ctl, AGNX_TXM_CTL);
- /* Or 0x18000 to Control reg */
- reg = agnx_read32(ctl, AGNX_TXM_CTL);
- reg |= 0x18000;
- agnx_write32(ctl, AGNX_TXM_CTL, reg);
- /* Wait for bit 0 in Control Reg to clear */
- udelay(80);
- reg = agnx_read32(ctl, AGNX_TXM_CTL);
-
- /* Set Listen Interval Count to default */
- agnx_write32(ctl, AGNX_TXM_LISINTERCNT, 0x1);
- /* Set DTIM period count to default */
- agnx_write32(ctl, AGNX_TXM_DTIMPERICNT, 0x2000);
-} /* tx_management_init */
-
-static void rx_management_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- AGNX_TRACE;
-
- /* Initialize the Routing Table */
- routing_table_init(priv);
-
- if (priv->revid >= 3) {
- agnx_write32(ctl, 0x2074, 0x1f171710);
- agnx_write32(ctl, 0x2078, 0x10100d0d);
- agnx_write32(ctl, 0x207c, 0x11111010);
- } else {
- agnx_write32(ctl, AGNX_RXM_DELAY11, 0x0);
- }
- agnx_write32(ctl, AGNX_RXM_REQRATE, 0x8195e00);
-}
-
-
-static void agnx_timer_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- AGNX_TRACE;
-
-/* /\* Write 0x249f00 (tick duration?) to Timer 1 *\/ */
-/* agnx_write32(ctl, AGNX_TIMCTL_TIMER1, 0x249f00); */
-/* /\* Write 0xe2 to Timer 1 Control *\/ */
-/* agnx_write32(ctl, AGNX_TIMCTL_TIM1CTL, 0xe2); */
-
- /* Write 0x249f00 (tick duration?) to Timer 1 */
- agnx_write32(ctl, AGNX_TIMCTL_TIMER1, 0x0);
- /* Write 0xe2 to Timer 1 Control */
- agnx_write32(ctl, AGNX_TIMCTL_TIM1CTL, 0x0);
-
- iowrite32(0xFFFFFFFF, priv->ctl + AGNX_TXM_BEACON_CTL);
-}
-
-static void power_manage_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- agnx_write32(ctl, AGNX_PM_MACMSW, 0x1f);
- agnx_write32(ctl, AGNX_PM_RFCTL, 0x1f);
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg &= 0xf00f;
- reg |= 0xa0;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
- if (priv->revid >= 3) {
- reg = agnx_read32(ctl, AGNX_PM_SOFTRST);
- reg |= 0x18;
- agnx_write32(ctl, AGNX_PM_SOFTRST, reg);
- }
-} /* power_manage_init */
-
-
-static void gain_ctlcnt_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- agnx_write32(ctl, AGNX_GCR_TRACNT5, 0x119);
- agnx_write32(ctl, AGNX_GCR_TRACNT6, 0x118);
- agnx_write32(ctl, AGNX_GCR_TRACNT7, 0x117);
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg &= ~0x8;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
- agnx_write32(ctl, AGNX_CIR_ADDRWIN, 0x0);
-
- /* FIXME Write the initial Station Descriptor for the card */
- sta_init(priv, LOCAL_STAID);
- sta_init(priv, BSSID_STAID);
-
- /* Enable staion 0 and 1 can do TX */
- /* It seemed if we set other bit to 1 the bit 0 will
- be auto change to 0 */
- agnx_write32(ctl, AGNX_BM_TXTOPEER, 0x2 | 0x1);
-/* agnx_write32(ctl, AGNX_BM_TXTOPEER, 0x1); */
-} /* gain_ctlcnt_init */
-
-
-static void phy_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- void __iomem *data = priv->data;
- u32 reg;
- AGNX_TRACE;
-
- /* Load InitialGainTable */
- gain_table_init(priv);
-
- agnx_write32(ctl, AGNX_CIR_ADDRWIN, 0x2000000);
-
- /* Clear the following offsets in Memory Range #2: */
- memset_io(data + 0x5040, 0, 0xa * 4);
- memset_io(data + 0x5080, 0, 0xa * 4);
- memset_io(data + 0x50c0, 0, 0xa * 4);
- memset_io(data + 0x5400, 0, 0x80 * 4);
- memset_io(data + 0x6000, 0, 0x280 * 4);
- memset_io(data + 0x7000, 0, 0x280 * 4);
- memset_io(data + 0x8000, 0, 0x280 * 4);
-
- /* Initialize the Following Registers According to PCI Revision ID */
- if (priv->revid == 0) {
- /* fixme the part hasn't been update but below has been update
- based on WGM511 */
- agnx_write32(ctl, AGNX_ACI_LEN, 0xf);
- agnx_write32(ctl, AGNX_ACI_TIMER1, 0x1d);
- agnx_write32(ctl, AGNX_ACI_TIMER2, 0x3);
- agnx_write32(ctl, AGNX_ACI_AICCHA0OVE, 0x11);
- agnx_write32(ctl, AGNX_ACI_AICCHA1OVE, 0x0);
- agnx_write32(ctl, AGNX_GCR_THD0A, 0x64);
- agnx_write32(ctl, AGNX_GCR_THD0AL, 0x4b);
- agnx_write32(ctl, AGNX_GCR_THD0B, 0x4b);
- agnx_write32(ctl, AGNX_GCR_DUNSAT, 0x14);
- agnx_write32(ctl, AGNX_GCR_DSAT, 0x24);
- agnx_write32(ctl, AGNX_GCR_DFIRCAL, 0x8);
- agnx_write32(ctl, AGNX_GCR_DGCTL11A, 0x1a);
- agnx_write32(ctl, AGNX_GCR_DGCTL11B, 0x3);
- agnx_write32(ctl, AGNX_GCR_GAININIT, 0xd);
- agnx_write32(ctl, AGNX_GCR_THNOSIG, 0x1);
- agnx_write32(ctl, AGNX_GCR_COARSTEP, 0x7);
- agnx_write32(ctl, AGNX_GCR_SIFST11A, 0x28);
- agnx_write32(ctl, AGNX_GCR_SIFST11B, 0x28);
- reg = agnx_read32(ctl, AGNX_GCR_CWDETEC);
- reg |= 0x1;
- agnx_write32(ctl, AGNX_GCR_CWDETEC, reg);
- agnx_write32(ctl, AGNX_GCR_0X38, 0x1e);
- agnx_write32(ctl, AGNX_GCR_BOACT, 0x26);
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
- agnx_write32(ctl, AGNX_GCR_NLISTANT, 0x3);
- agnx_write32(ctl, AGNX_GCR_NACTIANT, 0x3);
- agnx_write32(ctl, AGNX_GCR_NMEASANT, 0x3);
- agnx_write32(ctl, AGNX_GCR_NCAPTANT, 0x3);
- agnx_write32(ctl, AGNX_GCR_THCAP11A, 0x0);
- agnx_write32(ctl, AGNX_GCR_THCAP11B, 0x0);
- agnx_write32(ctl, AGNX_GCR_THCAPRX11A, 0x0);
- agnx_write32(ctl, AGNX_GCR_THCAPRX11B, 0x0);
- agnx_write32(ctl, AGNX_GCR_THLEVDRO, 0x10);
- agnx_write32(ctl, AGNX_GCR_MAXRXTIME11A, 0x1);
- agnx_write32(ctl, AGNX_GCR_MAXRXTIME11B, 0x1);
- agnx_write32(ctl, AGNX_GCR_CORRTIME, 0x190);
- agnx_write32(ctl, AGNX_GCR_SIGHTH, 0x78);
- agnx_write32(ctl, AGNX_GCR_SIGLTH, 0x1c);
- agnx_write32(ctl, AGNX_GCR_CORRDROP, 0x0);
- agnx_write32(ctl, AGNX_GCR_THCD, 0x0);
- agnx_write32(ctl, AGNX_GCR_MAXPOWDIFF, 0x1);
- agnx_write32(ctl, AGNX_GCR_TESTBUS, 0x0);
- agnx_write32(ctl, AGNX_GCR_ANTCFG, 0x1f);
- agnx_write32(ctl, AGNX_GCR_THJUMP, 0x14);
- agnx_write32(ctl, AGNX_GCR_THPOWER, 0x0);
- agnx_write32(ctl, AGNX_GCR_THPOWCLIP, 0x30);
- agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 0x32);
- agnx_write32(ctl, AGNX_GCR_THRX11BPOWMIN, 0x19);
- agnx_write32(ctl, AGNX_GCR_0X14c, 0x0);
- agnx_write32(ctl, AGNX_GCR_0X150, 0x0);
- agnx_write32(ctl, 0x9400, 0x0);
- agnx_write32(ctl, 0x940c, 0x6ff);
- agnx_write32(ctl, 0x9428, 0xa0);
- agnx_write32(ctl, 0x9434, 0x0);
- agnx_write32(ctl, 0x9c04, 0x15);
- agnx_write32(ctl, 0x9c0c, 0x7f);
- agnx_write32(ctl, 0x9c34, 0x0);
- agnx_write32(ctl, 0xc000, 0x38d);
- agnx_write32(ctl, 0x14018, 0x0);
- agnx_write32(ctl, 0x16000, 0x1);
- agnx_write32(ctl, 0x11004, 0x0);
- agnx_write32(ctl, 0xec54, 0xa);
- agnx_write32(ctl, 0xec1c, 0x5);
- } else if (priv->revid > 0) {
- agnx_write32(ctl, AGNX_ACI_LEN, 0xf);
- agnx_write32(ctl, AGNX_ACI_TIMER1, 0x21);
- agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
- agnx_write32(ctl, AGNX_ACI_AICCHA0OVE, 0x11);
- agnx_write32(ctl, AGNX_ACI_AICCHA1OVE, 0x0);
- agnx_write32(ctl, AGNX_GCR_DUNSAT, 0x14);
- agnx_write32(ctl, AGNX_GCR_DSAT, 0x24);
- agnx_write32(ctl, AGNX_GCR_DFIRCAL, 0x8);
- agnx_write32(ctl, AGNX_GCR_DGCTL11A, 0x1a);
- agnx_write32(ctl, AGNX_GCR_DGCTL11B, 0x3);
- agnx_write32(ctl, AGNX_GCR_GAININIT, 0xd);
- agnx_write32(ctl, AGNX_GCR_THNOSIG, 0x1);
- agnx_write32(ctl, AGNX_GCR_COARSTEP, 0x7);
- agnx_write32(ctl, AGNX_GCR_SIFST11A, 0x28);
- agnx_write32(ctl, AGNX_GCR_SIFST11B, 0x28);
- agnx_write32(ctl, AGNX_GCR_CWDETEC, 0x0);
- agnx_write32(ctl, AGNX_GCR_0X38, 0x1e);
-/* agnx_write32(ctl, AGNX_GCR_BOACT, 0x26);*/
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-
- agnx_write32(ctl, AGNX_GCR_THCAP11A, 0x32);
- agnx_write32(ctl, AGNX_GCR_THCAP11B, 0x32);
- agnx_write32(ctl, AGNX_GCR_THCAPRX11A, 0x32);
- agnx_write32(ctl, AGNX_GCR_THCAPRX11B, 0x32);
- agnx_write32(ctl, AGNX_GCR_THLEVDRO, 0x10);
- agnx_write32(ctl, AGNX_GCR_MAXRXTIME11A, 0x1ad);
- agnx_write32(ctl, AGNX_GCR_MAXRXTIME11B, 0xa10);
- agnx_write32(ctl, AGNX_GCR_CORRTIME, 0x190);
- agnx_write32(ctl, AGNX_GCR_CORRDROP, 0x0);
- agnx_write32(ctl, AGNX_GCR_THCD, 0x0);
- agnx_write32(ctl, AGNX_GCR_THCS, 0x0);
- agnx_write32(ctl, AGNX_GCR_MAXPOWDIFF, 0x4);
- agnx_write32(ctl, AGNX_GCR_TESTBUS, 0x0);
- agnx_write32(ctl, AGNX_GCR_THJUMP, 0x1e);
- agnx_write32(ctl, AGNX_GCR_THPOWER, 0x0);
- agnx_write32(ctl, AGNX_GCR_THPOWCLIP, 0x2a);
- agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 0x3c);
- agnx_write32(ctl, AGNX_GCR_THRX11BPOWMIN, 0x19);
- agnx_write32(ctl, AGNX_GCR_0X14c, 0x0);
- agnx_write32(ctl, AGNX_GCR_0X150, 0x0);
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
- agnx_write32(ctl, AGNX_GCR_WATCHDOG, 0x37);
- agnx_write32(ctl, 0x9400, 0x0);
- agnx_write32(ctl, 0x940c, 0x6ff);
- agnx_write32(ctl, 0x9428, 0xa0);
- agnx_write32(ctl, 0x9434, 0x0);
- agnx_write32(ctl, 0x9c04, 0x15);
- agnx_write32(ctl, 0x9c0c, 0x7f);
- agnx_write32(ctl, 0x9c34, 0x0);
- agnx_write32(ctl, 0xc000, 0x38d);
- agnx_write32(ctl, 0x14014, 0x1000);
- agnx_write32(ctl, 0x14018, 0x0);
- agnx_write32(ctl, 0x16000, 0x1);
- agnx_write32(ctl, 0x11004, 0x0);
- agnx_write32(ctl, 0xec54, 0xa);
- agnx_write32(ctl, 0xec1c, 0x50);
- } else if (priv->revid > 1) {
- reg = agnx_read32(ctl, 0xec18);
- reg |= 0x8;
- agnx_write32(ctl, 0xec18, reg);
- }
-
- /* Write the TX Fir Coefficient Table */
- tx_fir_table_init(priv);
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg &= ~0x8;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
- reg = agnx_read32(ctl, AGNX_PM_PLLCTL);
- reg |= 0x1;
- agnx_write32(ctl, AGNX_PM_PLLCTL, reg);
-
-/* reg = agnx_read32(ctl, 0x1a030); */
-/* reg &= ~0x4; */
-/* agnx_write32(ctl, 0x1a030, reg); */
-
- agnx_write32(ctl, AGNX_GCR_TRACNT4, 0x113);
-} /* phy_init */
-
-static void chip_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- band_management_init(priv);
-
- rf_chips_init(priv);
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
- /* Initialize the PHY */
- phy_init(priv);
-
- encryption_init(priv);
-
- tx_management_init(priv);
-
- rx_management_init(priv);
-
- power_manage_init(priv);
-
- /* Initialize the Timers */
- agnx_timer_init(priv);
-
- /* Write 0xc390bf9 to Interrupt Mask (Disable TX) */
- reg = 0xc390bf9 & ~IRQ_TX_BEACON;
- reg &= ~IRQ_TX_DISABLE;
- agnx_write32(ctl, AGNX_INT_MASK, reg);
-
- reg = agnx_read32(ctl, AGNX_CIR_BLKCTL);
- reg |= 0x800;
- agnx_write32(ctl, AGNX_CIR_BLKCTL, reg);
-
- /* set it when need get multicast enable? */
- agnx_write32(ctl, AGNX_BM_MTSM, 0xff);
-} /* chip_init */
-
-
-static inline void set_promis_and_managed(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x10 | 0x2);
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x10 | 0x2);
-}
-static inline void set_learn_mode(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x8);
-}
-static inline void set_scan_mode(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x20);
-}
-static inline void set_promiscuous_mode(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- /* agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x210);*/
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x10);
-}
-static inline void set_managed_mode(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x2);
-}
-static inline void set_adhoc_mode(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, 0x0);
-}
-
-#if 0
-static void unknow_register_write(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
-
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x0, 0x3e);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x4, 0xb2);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x8, 0x140);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0xc, 0x1C0);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x10, 0x1FF);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x14, 0x1DD);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x18, 0x15F);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x1c, 0xA1);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x20, 0x3E7);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x24, 0x36B);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x28, 0x348);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x2c, 0x37D);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x30, 0x3DE);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x34, 0x36);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x38, 0x64);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x3c, 0x57);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x40, 0x23);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x44, 0x3ED);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x48, 0x3C9);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x4c, 0x3CA);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x50, 0x3E7);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x54, 0x8);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x58, 0x1F);
- agnx_write32(ctl, AGNX_UNKNOWN_BASE + 0x5c, 0x1a);
-}
-#endif
-
-static void card_interface_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u8 bssid[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
- u32 reg;
- unsigned int i;
- AGNX_TRACE;
-
- might_sleep();
- /* Clear RX Control and Enable RX queues */
- agnx_write32(ctl, AGNX_CIR_RXCTL, 0x8);
-
- might_sleep();
- /* Do a full reset of the card */
- card_full_reset(priv);
- might_sleep();
-
- /* Check and set Card Endianness */
- reg = ioread32(priv->ctl + AGNX_CIR_ENDIAN);
- /* TODO If not 0xB3B2B1B0 set to 0xB3B2B1B0 */
- printk(KERN_INFO PFX "CIR_ENDIAN is %x\n", reg);
-
-
- /* Config the eeprom */
- agnx_write32(ctl, AGNX_CIR_SERIALITF, 0x7000086);
- udelay(10);
- reg = agnx_read32(ctl, AGNX_CIR_SERIALITF);
-
-
- agnx_write32(ctl, AGNX_PM_SOFTRST, 0x80000033);
- reg = agnx_read32(ctl, 0xec50);
- reg |= 0xf;
- agnx_write32(ctl, 0xec50, reg);
- agnx_write32(ctl, AGNX_PM_SOFTRST, 0x0);
-
-
- reg = agnx_read32(ctl, AGNX_SYSITF_GPIOIN);
- udelay(10);
- reg = agnx_read32(ctl, AGNX_CIR_SERIALITF);
-
- /* Dump the eeprom */
- do {
- char eeprom[0x100000/0x100];
-
- for (i = 0; i < 0x100000; i += 0x100) {
- agnx_write32(ctl, AGNX_CIR_SERIALITF, 0x3000000 + i);
- udelay(13);
- reg = agnx_read32(ctl, AGNX_CIR_SERIALITF);
- udelay(70);
- reg = agnx_read32(ctl, AGNX_CIR_SERIALITF);
- eeprom[i/0x100] = reg & 0xFF;
- udelay(10);
- }
- print_hex_dump_bytes(PFX "EEPROM: ", DUMP_PREFIX_NONE, eeprom,
- ARRAY_SIZE(eeprom));
- } while (0);
-
- spi_rc_write(ctl, RF_CHIP0, 0x26);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-
- /* Initialize the system interface */
- system_itf_init(priv);
-
- might_sleep();
- /* Chip Initialization (Polaris) */
- chip_init(priv);
- might_sleep();
-
- /* Calibrate the antennae */
- antenna_calibrate(priv);
-
- reg = agnx_read32(ctl, 0xec50);
- reg &= ~0x40;
- agnx_write32(ctl, 0xec50, reg);
- agnx_write32(ctl, AGNX_PM_SOFTRST, 0x0);
- agnx_write32(ctl, AGNX_PM_PLLCTL, 0x1);
-
- reg = agnx_read32(ctl, AGNX_BM_BMCTL);
- reg |= 0x8000;
- agnx_write32(ctl, AGNX_BM_BMCTL, reg);
- enable_receiver(priv);
- reg = agnx_read32(ctl, AGNX_SYSITF_SYSMODE);
- reg |= 0x200;
- agnx_write32(ctl, AGNX_SYSITF_SYSMODE, reg);
- enable_receiver(priv);
-
- might_sleep();
- /* Initialize Gain Control Counts */
- gain_ctlcnt_init(priv);
-
- /* Write Initial Station Power Template for this station(#0) */
- sta_power_init(priv, LOCAL_STAID);
-
- might_sleep();
- /* Initialize the rx,td,tm rings, for each node in the ring */
- fill_rings(priv);
-
- might_sleep();
-
-
- agnx_write32(ctl, AGNX_PM_SOFTRST, 0x80000033);
- agnx_write32(ctl, 0xec50, 0xc);
- agnx_write32(ctl, AGNX_PM_SOFTRST, 0x0);
-
- /* FIXME Initialize the transmit control register */
- agnx_write32(ctl, AGNX_TXM_CTL, 0x194c1);
-
- enable_receiver(priv);
-
- might_sleep();
- /* FIXME Set the Receive Control Mac Address to card address */
- mac_address_set(priv);
- enable_receiver(priv);
- might_sleep();
-
- /* Set the recieve request rate */
- /* FIXME Enable the request */
- /* Check packet length */
- /* Set maximum packet length */
-/* agnx_write32(ctl, AGNX_RXM_REQRATE, 0x88195e00); */
-/* enable_receiver(priv); */
-
- /* Set the Receiver BSSID */
- receiver_bssid_set(priv, bssid);
-
- /* FIXME Set to managed mode */
- set_managed_mode(priv);
-/* set_promiscuous_mode(priv); */
-/* set_scan_mode(priv); */
-/* set_learn_mode(priv); */
-/* set_promis_and_managed(priv); */
-/* set_adhoc_mode(priv); */
-
- /* Set the recieve request rate */
- /* Check packet length */
- agnx_write32(ctl, AGNX_RXM_REQRATE, 0x08000000);
- reg = agnx_read32(ctl, AGNX_RXM_REQRATE);
- /* Set maximum packet length */
- reg |= 0x00195e00;
- agnx_write32(ctl, AGNX_RXM_REQRATE, reg);
-
- /* Configure the RX and TX interrupt */
- reg = ENABLE_RX_INTERRUPT | RX_CACHE_LINE | FRAG_LEN_2048 | FRAG_BE;
- agnx_write32(ctl, AGNX_CIR_RXCFG, reg);
- /* FIXME */
- reg = ENABLE_TX_INTERRUPT | TX_CACHE_LINE | FRAG_LEN_2048 | FRAG_BE;
- agnx_write32(ctl, AGNX_CIR_TXCFG, reg);
-
- /* Enable RX TX Interrupts */
- agnx_write32(ctl, AGNX_CIR_RXCTL, 0x80);
- agnx_write32(ctl, AGNX_CIR_TXMCTL, 0x80);
- agnx_write32(ctl, AGNX_CIR_TXDCTL, 0x80);
-
- /* FIXME Set the master control interrupt in block control */
- agnx_write32(ctl, AGNX_CIR_BLKCTL, 0x800);
-
- /* Enable RX and TX queues */
- reg = agnx_read32(ctl, AGNX_CIR_RXCTL);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_CIR_RXCTL, reg);
- reg = agnx_read32(ctl, AGNX_CIR_TXMCTL);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_CIR_TXMCTL, reg);
- reg = agnx_read32(ctl, AGNX_CIR_TXDCTL);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_CIR_TXDCTL, reg);
-
- agnx_write32(ctl, AGNX_SYSITF_GPIOUT, 0x5);
- /* FIXME */
- /* unknow_register_write(priv); */
- /* Update local card hash entry */
- hash_write(priv, priv->mac_addr, LOCAL_STAID);
-
- might_sleep();
-
- /* FIXME */
- agnx_set_channel(priv, 1);
- might_sleep();
-} /* agnx_card_interface_init */
-
-
-void agnx_hw_init(struct agnx_priv *priv)
-{
- AGNX_TRACE;
- might_sleep();
- card_interface_init(priv);
-}
-
-int agnx_hw_reset(struct agnx_priv *priv)
-{
- return card_full_reset(priv);
-}
-
-int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len)
-{
- AGNX_TRACE;
- return 0;
-}
-
-void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid)
-{
- receiver_bssid_set(priv, bssid);
-}
+++ /dev/null
-#ifndef AGNX_PHY_H_
-#define AGNX_PHY_H_
-
-#include "agnx.h"
-
-/* Transmission Managment Registers */
-#define AGNX_TXM_BASE 0x0000
-#define AGNX_TXM_CTL 0x0000 /* control register */
-#define AGNX_TXM_ETMF 0x0004 /* enable transmission management functions */
-#define AGNX_TXM_TXTEMP 0x0008 /* transmission template */
-#define AGNX_TXM_RETRYSTAID 0x000c /* Retry Station ID */
-#define AGNX_TXM_TIMESTAMPLO 0x0010 /* Timestamp Lo */
-#define AGNX_TXM_TIMESTAMPHI 0x0014 /* Timestamp Hi */
-#define AGNX_TXM_TXDELAY 0x0018 /* tx delay */
-#define AGNX_TXM_TBTTLO 0x0020 /* tbtt Lo */
-#define AGNX_TXM_TBTTHI 0x0024 /* tbtt Hi */
-#define AGNX_TXM_BEAINTER 0x0028 /* Beacon Interval */
-#define AGNX_TXM_NAV 0x0030 /* NAV */
-#define AGNX_TXM_CFPMDV 0x0034 /* CFP MDV */
-#define AGNX_TXM_CFPERCNT 0x0038 /* CFP period count */
-#define AGNX_TXM_PROBDELAY 0x003c /* probe delay */
-#define AGNX_TXM_LISINTERCNT 0x0040 /* listen interval count */
-#define AGNX_TXM_DTIMPERICNT 0x004c /* DTIM period count */
-
-#define AGNX_TXM_BEACON_CTL 0x005c /* beacon control */
-
-#define AGNX_TXM_SCHEMPCNT 0x007c /* schedule empty count */
-#define AGNX_TXM_MAXTIMOUT 0x0084 /* max timeout exceed count */
-#define AGNX_TXM_MAXCFPTIM 0x0088 /* max CF poll timeout count */
-#define AGNX_TXM_MAXRXTIME 0x008c /* max RX timeout count */
-#define AGNX_TXM_MAXACKTIM 0x0090 /* max ACK timeout count */
-#define AGNX_TXM_DIF01 0x00a0 /* DIF 0-1 */
-#define AGNX_TXM_DIF23 0x00a4 /* DIF 2-3 */
-#define AGNX_TXM_DIF45 0x00a8 /* DIF 4-5 */
-#define AGNX_TXM_DIF67 0x00ac /* DIF 6-7 */
-#define AGNX_TXM_SIFSPIFS 0x00b0 /* SIFS/PIFS */
-#define AGNX_TXM_TIFSEIFS 0x00b4 /* TIFS/EIFS */
-#define AGNX_TXM_MAXCCACNTSLOT 0x00b8 /* max CCA count slot */
-#define AGNX_TXM_SLOTLIMIT 0x00bc /* slot limit/1 msec limit */
-#define AGNX_TXM_CFPOLLRXTIM 0x00f0 /* CF poll RX timeout count */
-#define AGNX_TXM_CFACKT11B 0x00f4 /* CF ack timeout limit for 11b */
-#define AGNX_TXM_CW0 0x0100 /* CW 0 */
-#define AGNX_TXM_SLBEALIM0 0x0108 /* short/long beacon limit 0 */
-#define AGNX_TXM_CW1 0x0120 /* CW 1 */
-#define AGNX_TXM_SLBEALIM1 0x0128 /* short/long beacon limit 1 */
-#define AGNX_TXM_CW2 0x0140 /* CW 2 */
-#define AGNX_TXM_SLBEALIM2 0x0148 /* short/long beacon limit 2 */
-#define AGNX_TXM_CW3 0x0160 /* CW 3 */
-#define AGNX_TXM_SLBEALIM3 0x0168 /* short/long beacon limit 3 */
-#define AGNX_TXM_CW4 0x0180 /* CW 4 */
-#define AGNX_TXM_SLBEALIM4 0x0188 /* short/long beacon limit 4 */
-#define AGNX_TXM_CW5 0x01a0 /* CW 5 */
-#define AGNX_TXM_SLBEALIM5 0x01a8 /* short/long beacon limit 5 */
-#define AGNX_TXM_CW6 0x01c0 /* CW 6 */
-#define AGNX_TXM_SLBEALIM6 0x01c8 /* short/long beacon limit 6 */
-#define AGNX_TXM_CW7 0x01e0 /* CW 7 */
-#define AGNX_TXM_SLBEALIM7 0x01e8 /* short/long beacon limit 7 */
-#define AGNX_TXM_BEACONTEMP 0x1000 /* beacon template */
-#define AGNX_TXM_STAPOWTEMP 0x1a00 /* Station Power Template */
-
-/* Receive Management Control Registers */
-#define AGNX_RXM_BASE 0x2000
-#define AGNX_RXM_REQRATE 0x2000 /* requested rate */
-#define AGNX_RXM_MACHI 0x2004 /* first 4 bytes of mac address */
-#define AGNX_RXM_MACLO 0x2008 /* last 2 bytes of mac address */
-#define AGNX_RXM_BSSIDHI 0x200c /* bssid hi */
-#define AGNX_RXM_BSSIDLO 0x2010 /* bssid lo */
-#define AGNX_RXM_HASH_CMD_FLAG 0x2014 /* Flags for the RX Hash Command Default:0 */
-#define AGNX_RXM_HASH_CMD_HIGH 0x2018 /* The High half of the Hash Command */
-#define AGNX_RXM_HASH_CMD_LOW 0x201c /* The Low half of the Hash Command */
-#define AGNX_RXM_ROUTAB 0x2020 /* routing table */
-#define ROUTAB_SUBTYPE_SHIFT 24
-#define ROUTAB_TYPE_SHIFT 28
-#define ROUTAB_STATUS_SHIFT 30
-#define ROUTAB_RW_SHIFT 31
-#define ROUTAB_ROUTE_DROP 0xf00000 /* Drop */
-#define ROUTAB_ROUTE_CPU 0x400000 /* CPU */
-#define ROUTAB_ROUTE_ENCRY 0x500800 /* Encryption */
-#define ROUTAB_ROUTE_RFP 0x800000 /* RFP */
-
-#define ROUTAB_TYPE_MANAG 0x0 /* Management */
-#define ROUTAB_TYPE_CTL 0x1 /* Control */
-#define ROUTAB_TYPE_DATA 0x2 /* Data */
-
-#define ROUTAB_SUBTYPE_DATA 0x0
-#define ROUTAB_SUBTYPE_DATAACK 0x1
-#define ROUTAB_SUBTYPE_DATAPOLL 0x2
-#define ROUTAB_SUBTYPE_DATAPOLLACK 0x3
-#define ROUTAB_SUBTYPE_NULL 0x4 /* NULL */
-#define ROUTAB_SUBTYPE_NULLACK 0x5
-#define ROUTAB_SUBTYPE_NULLPOLL 0x6
-#define ROUTAB_SUBTYPE_NULLPOLLACK 0x7
-#define ROUTAB_SUBTYPE_QOSDATA 0x8 /* QOS DATA */
-#define ROUTAB_SUBTYPE_QOSDATAACK 0x9
-#define ROUTAB_SUBTYPE_QOSDATAPOLL 0xa
-#define ROUTAB_SUBTYPE_QOSDATAACKPOLL 0xb
-#define ROUTAB_SUBTYPE_QOSNULL 0xc
-#define ROUTAB_SUBTYPE_QOSNULLACK 0xd
-#define ROUTAB_SUBTYPE_QOSNULLPOLL 0xe
-#define ROUTAB_SUBTYPE_QOSNULLPOLLACK 0xf
-#define AGNX_RXM_DELAY11 0x2024 /* delay 11(AB) */
-#define AGNX_RXM_SOF_CNT 0x2028 /* SOF Count */
-#define AGNX_RXM_FRAG_CNT 0x202c /* Fragment Count*/
-#define AGNX_RXM_FCS_CNT 0x2030 /* FCS Count */
-#define AGNX_RXM_BSSID_MISS_CNT 0x2034 /* BSSID Miss Count */
-#define AGNX_RXM_PDU_ERR_CNT 0x2038 /* PDU Error Count */
-#define AGNX_RXM_DEST_MISS_CNT 0x203C /* Destination Miss Count */
-#define AGNX_RXM_DROP_CNT 0x2040 /* Drop Count */
-#define AGNX_RXM_ABORT_CNT 0x2044 /* Abort Count */
-#define AGNX_RXM_RELAY_CNT 0x2048 /* Relay Count */
-#define AGNX_RXM_HASH_MISS_CNT 0x204c /* Hash Miss Count */
-#define AGNX_RXM_SA_HI 0x2050 /* Address of received packet Hi */
-#define AGNX_RXM_SA_LO 0x2054 /* Address of received packet Lo */
-#define AGNX_RXM_HASH_DUMP_LST 0x2100 /* Contains Hash Data */
-#define AGNX_RXM_HASH_DUMP_MST 0x2104 /* Contains Hash Data */
-#define AGNX_RXM_HASH_DUMP_DATA 0x2108 /* The Station ID to dump */
-
-
-/* Encryption Managment */
-#define AGNX_ENCRY_BASE 0x2400
-#define AGNX_ENCRY_WEPKEY0 0x2440 /* wep key #0 */
-#define AGNX_ENCRY_WEPKEY1 0x2444 /* wep key #1 */
-#define AGNX_ENCRY_WEPKEY2 0x2448 /* wep key #2 */
-#define AGNX_ENCRY_WEPKEY3 0x244c /* wep key #3 */
-#define AGNX_ENCRY_CCMRECTL 0x2460 /* ccm replay control */
-
-
-/* Band Management Registers */
-#define AGNX_BM_BASE 0x2c00
-#define AGNX_BM_BMCTL 0x2c00 /* band management control */
-#define AGNX_BM_TXWADDR 0x2c18 /* tx workqueue address start */
-#define AGNX_BM_TXTOPEER 0x2c24 /* transmit to peers */
-#define AGNX_BM_FPLHP 0x2c2c /* free pool list head pointer */
-#define AGNX_BM_FPLTP 0x2c30 /* free pool list tail pointer */
-#define AGNX_BM_FPCNT 0x2c34 /* free pool count */
-#define AGNX_BM_CIPDUWCNT 0x2c38 /* card interface pdu workqueue count */
-#define AGNX_BM_SPPDUWCNT 0x2c3c /* sp pdu workqueue count */
-#define AGNX_BM_RFPPDUWCNT 0x2c40 /* rfp pdu workqueue count */
-#define AGNX_BM_RHPPDUWCNT 0x2c44 /* rhp pdu workqueue count */
-#define AGNX_BM_CIWQCTL 0x2c48 /* Card Interface WorkQueue Control */
-#define AGNX_BM_CPUTXWCTL 0x2c50 /* cpu tx workqueue control */
-#define AGNX_BM_CPURXWCTL 0x2c58 /* cpu rx workqueue control */
-#define AGNX_BM_CPULWCTL 0x2c60 /* cpu low workqueue control */
-#define AGNX_BM_CPUHWCTL 0x2c68 /* cpu high workqueue control */
-#define AGNX_BM_SPTXWCTL 0x2c70 /* sp tx workqueue control */
-#define AGNX_BM_SPRXWCTL 0x2c78 /* sp rx workqueue control */
-#define AGNX_BM_RFPWCTL 0x2c80 /* RFP workqueue control */
-#define AGNX_BM_MTSM 0x2c90 /* Multicast Transmit Station Mask */
-
-/* Card Interface Registers (32bits) */
-#define AGNX_CIR_BASE 0x3000
-#define AGNX_CIR_BLKCTL 0x3000 /* block control*/
-#define AGNX_STAT_TX 0x1
-#define AGNX_STAT_RX 0x2
-#define AGNX_STAT_X 0x4
-/* Below two interrupt flags will be set by our but not CPU or the card */
-#define AGNX_STAT_TXD 0x10
-#define AGNX_STAT_TXM 0x20
-
-#define AGNX_CIR_ADDRWIN 0x3004 /* Addressable Windows*/
-#define AGNX_CIR_ENDIAN 0x3008 /* card endianness */
-#define AGNX_CIR_SERIALITF 0x3020 /* serial interface */
-#define AGNX_CIR_RXCFG 0x3040 /* receive config */
-#define ENABLE_RX_INTERRUPT 0x20
-#define RX_CACHE_LINE 0x8
-/* the RX fragment length */
-#define FRAG_LEN_256 0x0 /* 256B */
-#define FRAG_LEN_512 0x1
-#define FRAG_LEN_1024 0x2
-#define FRAG_LEN_2048 0x3
-#define FRAG_BE 0x10
-#define AGNX_CIR_RXCTL 0x3050 /* receive control */
-/* memory address, chipside */
-#define AGNX_CIR_RXCMSTART 0x3054 /* receive client memory start */
-#define AGNX_CIR_RXCMEND 0x3058 /* receive client memory end */
-/* memory address, pci */
-#define AGNX_CIR_RXHOSTADDR 0x3060 /* receive hostside address */
-/* memory address, chipside */
-#define AGNX_CIR_RXCLIADDR 0x3064 /* receive clientside address */
-#define AGNX_CIR_RXDMACTL 0x3068 /* receive dma control */
-#define AGNX_CIR_TXCFG 0x3080 /* transmit config */
-#define AGNX_CIR_TXMCTL 0x3090 /* Transmit Management Control */
-#define ENABLE_TX_INTERRUPT 0x20
-#define TX_CACHE_LINE 0x8
-#define AGNX_CIR_TXMSTART 0x3094 /* Transmit Management Start */
-#define AGNX_CIR_TXMEND 0x3098 /* Transmit Management End */
-#define AGNX_CIR_TXDCTL 0x30a0 /* transmit data control */
-/* memeory address, chipset */
-#define AGNX_CIR_TXDSTART 0x30a4 /* transmit data start */
-#define AGNX_CIR_TXDEND 0x30a8 /* transmit data end */
-#define AGNX_CIR_TXMHADDR 0x30b0 /* Transmit Management Hostside Address */
-#define AGNX_CIR_TXMCADDR 0x30b4 /* Transmit Management Clientside Address */
-#define AGNX_CIR_TXDMACTL 0x30b8 /* transmit dma control */
-
-
-/* Power Managment Unit */
-#define AGNX_PM_BASE 0x3c00
-#define AGNX_PM_PMCTL 0x3c00 /* PM Control*/
-#define AGNX_PM_MACMSW 0x3c08 /* MAC Manual Slow Work Enable */
-#define AGNX_PM_RFCTL 0x3c0c /* RF Control */
-#define AGNX_PM_PHYMW 0x3c14 /* Phy Mannal Work */
-#define AGNX_PM_SOFTRST 0x3c18 /* PMU Soft Reset */
-#define AGNX_PM_PLLCTL 0x3c1c /* PMU PLL control*/
-#define AGNX_PM_TESTPHY 0x3c24 /* PMU Test Phy */
-
-
-/* Interrupt Control interface */
-#define AGNX_INT_BASE 0x4000
-#define AGNX_INT_STAT 0x4000 /* interrupt status */
-#define AGNX_INT_MASK 0x400c /* interrupt mask */
-/* FIXME */
-#define IRQ_TX_BEACON 0x1 /* TX Beacon */
-#define IRQ_TX_RETRY 0x8 /* TX Retry Interrupt */
-#define IRQ_TX_ACTIVITY 0x10 /* TX Activity */
-#define IRQ_RX_ACTIVITY 0x20 /* RX Activity */
-/* FIXME I guess that instead RX a none exist staion's packet or
- the station hasn't been init */
-#define IRQ_RX_X 0x40
-#define IRQ_RX_Y 0x80 /* RX ? */
-#define IRQ_RX_HASHHIT 0x100 /* RX Hash Hit */
-#define IRQ_RX_FRAME 0x200 /* RX Frame */
-#define IRQ_ERR_INT 0x400 /* Error Interrupt */
-#define IRQ_TX_QUE_FULL 0x800 /* TX Workqueue Full */
-#define IRQ_BANDMAN_ERR 0x10000 /* Bandwidth Management Error */
-#define IRQ_TX_DISABLE 0x20000 /* TX Disable */
-#define IRQ_RX_IVASESKEY 0x80000 /* RX Invalid Session Key */
-#define IRQ_RX_KEYIDMIS 0x100000 /* RX key ID Mismatch */
-#define IRQ_REP_THHIT 0x200000 /* Replay Threshold Hit */
-#define IRQ_TIMER1 0x4000000 /* Timer1 */
-#define IRQ_TIMER_CNT 0x10000000 /* Timer Count */
-#define IRQ_PHY_FASTINT 0x20000000 /* Phy Fast Interrupt */
-#define IRQ_PHY_SLOWINT 0x40000000 /* Phy Slow Interrupt */
-#define IRQ_OTHER 0x80000000 /* Unknow interrupt */
-#define AGNX_IRQ_ALL 0xffffffff
-
-/* System Interface */
-#define AGNX_SYSITF_BASE 0x4400
-#define AGNX_SYSITF_SYSMODE 0x4400 /* system mode */
-#define AGNX_SYSITF_GPIOIN 0x4410 /* GPIO In */
-/* PIN lines for leds? */
-#define AGNX_SYSITF_GPIOUT 0x4414 /* GPIO Out */
-
-/* Timer Control */
-#define AGNX_TIMCTL_TIMER1 0x4800 /* Timer 1 */
-#define AGNX_TIMCTL_TIM1CTL 0x4808 /* Timer 1 Control */
-
-
-/* Antenna Calibration Interface */
-#define AGNX_ACI_BASE 0x5000
-#define AGNX_ACI_MODE 0x5000 /* Mode */
-#define AGNX_ACI_MEASURE 0x5004 /* Measure */
-#define AGNX_ACI_SELCHAIN 0x5008 /* Select Chain */
-#define AGNX_ACI_LEN 0x500c /* Length */
-#define AGNX_ACI_TIMER1 0x5018 /* Timer 1 */
-#define AGNX_ACI_TIMER2 0x501c /* Timer 2 */
-#define AGNX_ACI_OFFSET 0x5020 /* Offset */
-#define AGNX_ACI_STATUS 0x5030 /* Status */
-#define CALI_IDLE 0x0
-#define CALI_DONE 0x1
-#define CALI_BUSY 0x2
-#define CALI_ERR 0x3
-#define AGNX_ACI_AICCHA0OVE 0x5034 /* AIC Channel 0 Override */
-#define AGNX_ACI_AICCHA1OVE 0x5038 /* AIC Channel 1 Override */
-
-/* Gain Control Registers */
-#define AGNX_GCR_BASE 0x9000
-/* threshold of primary antenna */
-#define AGNX_GCR_THD0A 0x9000 /* threshold? D0 A */
-/* low threshold of primary antenna */
-#define AGNX_GCR_THD0AL 0x9004 /* threshold? D0 A low */
-/* threshold of secondary antenna */
-#define AGNX_GCR_THD0B 0x9008 /* threshold? D0_B */
-#define AGNX_GCR_DUNSAT 0x900c /* d unsaturated */
-#define AGNX_GCR_DSAT 0x9010 /* d saturated */
-#define AGNX_GCR_DFIRCAL 0x9014 /* D Fir/Cal */
-#define AGNX_GCR_DGCTL11A 0x9018 /* d gain control 11a */
-#define AGNX_GCR_DGCTL11B 0x901c /* d gain control 11b */
-/* strength of gain */
-#define AGNX_GCR_GAININIT 0x9020 /* gain initialization */
-#define AGNX_GCR_THNOSIG 0x9024 /* threhold no signal */
-#define AGNX_GCR_COARSTEP 0x9028 /* coarse stepping */
-#define AGNX_GCR_SIFST11A 0x902c /* sifx time 11a */
-#define AGNX_GCR_SIFST11B 0x9030 /* sifx time 11b */
-#define AGNX_GCR_CWDETEC 0x9034 /* cw detection */
-#define AGNX_GCR_0X38 0x9038 /* ???? */
-#define AGNX_GCR_BOACT 0x903c /* BO Active */
-#define AGNX_GCR_BOINACT 0x9040 /* BO Inactive */
-#define AGNX_GCR_BODYNA 0x9044 /* BO dynamic */
-/* 802.11 mode(a,b,g) */
-#define AGNX_GCR_DISCOVMOD 0x9048 /* discovery mode */
-#define AGNX_GCR_NLISTANT 0x904c /* number of listening antenna */
-#define AGNX_GCR_NACTIANT 0x9050 /* number of active antenna */
-#define AGNX_GCR_NMEASANT 0x9054 /* number of measuring antenna */
-#define AGNX_GCR_NCAPTANT 0x9058 /* number of capture antenna */
-#define AGNX_GCR_THCAP11A 0x905c /* threshold capture 11a */
-#define AGNX_GCR_THCAP11B 0x9060 /* threshold capture 11b */
-#define AGNX_GCR_THCAPRX11A 0x9064 /* threshold capture rx 11a */
-#define AGNX_GCR_THCAPRX11B 0x9068 /* threshold capture rx 11b */
-#define AGNX_GCR_THLEVDRO 0x906c /* threshold level drop */
-#define AGNX_GCR_GAINSET0 0x9070 /* Gainset 0 */
-#define AGNX_GCR_GAINSET1 0x9074 /* Gainset 1 */
-#define AGNX_GCR_GAINSET2 0x9078 /* Gainset 2 */
-#define AGNX_GCR_MAXRXTIME11A 0x907c /* maximum rx time 11a */
-#define AGNX_GCR_MAXRXTIME11B 0x9080 /* maximum rx time 11b */
-#define AGNX_GCR_CORRTIME 0x9084 /* correction time */
-/* reset the subsystem, 0 = disable, 1 = enable */
-#define AGNX_GCR_RSTGCTL 0x9088 /* reset gain control */
-/* channel receiving */
-#define AGNX_GCR_RXCHANEL 0x908c /* receive channel */
-#define AGNX_GCR_NOISE0 0x9090 /* Noise 0 */
-#define AGNX_GCR_NOISE1 0x9094 /* Noise 1 */
-#define AGNX_GCR_NOISE2 0x9098 /* Noise 2 */
-#define AGNX_GCR_SIGHTH 0x909c /* Signal High Threshold */
-#define AGNX_GCR_SIGLTH 0x90a0 /* Signal Low Threshold */
-#define AGNX_GCR_CORRDROP 0x90a4 /* correction drop */
-/* threshold of tertiay antenna */
-#define AGNX_GCR_THCD 0x90a8 /* threshold? CD */
-#define AGNX_GCR_THCS 0x90ac /* threshold? CS */
-#define AGNX_GCR_MAXPOWDIFF 0x90b8 /* maximum power difference */
-#define AGNX_GCR_TRACNT4 0x90ec /* Transition Count 4 */
-#define AGNX_GCR_TRACNT5 0x90f0 /* transition count 5 */
-#define AGNX_GCR_TRACNT6 0x90f4 /* transition count 6 */
-#define AGNX_GCR_TRACNT7 0x90f8 /* transition coutn 7 */
-#define AGNX_GCR_TESTBUS 0x911c /* test bus */
-#define AGNX_GCR_CHAINNUM 0x9120 /* Number of Chains */
-#define AGNX_GCR_ANTCFG 0x9124 /* Antenna Config */
-#define AGNX_GCR_THJUMP 0x912c /* threhold jump */
-#define AGNX_GCR_THPOWER 0x9130 /* threshold power */
-#define AGNX_GCR_THPOWCLIP 0x9134 /* threshold power clip*/
-#define AGNX_GCR_FORCECTLCLK 0x9138 /* Force Gain Control Clock */
-#define AGNX_GCR_GAINSETWRITE 0x913c /* Gainset Write */
-#define AGNX_GCR_THD0BTFEST 0x9140 /* threshold d0 b tf estimate */
-#define AGNX_GCR_THRX11BPOWMIN 0x9144 /* threshold rx 11b power minimum */
-#define AGNX_GCR_0X14c 0x914c /* ?? */
-#define AGNX_GCR_0X150 0x9150 /* ?? */
-#define AGNX_GCR_RXOVERIDE 0x9194 /* recieve override */
-#define AGNX_GCR_WATCHDOG 0x91b0 /* watchdog timeout */
-
-
-/* Spi Interface */
-#define AGNX_SPI_BASE 0xdc00
-#define AGNX_SPI_CFG 0xdc00 /* spi configuration */
-/* Only accept 16 bits */
-#define AGNX_SPI_WMSW 0xdc04 /* write most significant word */
-/* Only accept 16 bits */
-#define AGNX_SPI_WLSW 0xdc08 /* write least significant word */
-#define AGNX_SPI_CTL 0xdc0c /* spi control */
-#define AGNX_SPI_RMSW 0xdc10 /* read most significant word */
-#define AGNX_SPI_RLSW 0xdc14 /* read least significant word */
-/* SPI Control Mask */
-#define SPI_READ_CTL 0x4000 /* read control */
-#define SPI_BUSY_CTL 0x8000 /* busy control */
-/* RF and synth chips in spi */
-#define RF_CHIP0 0x400
-#define RF_CHIP1 0x800
-#define RF_CHIP2 0x1000
-#define SYNTH_CHIP 0x2000
-
-/* Unknown register */
-#define AGNX_UNKNOWN_BASE 0x7800
-
-/* FIXME MonitorGain */
-#define AGNX_MONGCR_BASE 0x12000
-
-/* Gain Table */
-#define AGNX_GAIN_TABLE 0x12400
-
-/* The initial FIR coefficient table */
-#define AGNX_FIR_BASE 0x19804
-
-#define AGNX_ENGINE_LOOKUP_TBL 0x800
-
-/* eeprom commands */
-#define EEPROM_CMD_NULL 0x0 /* NULL */
-#define EEPROM_CMD_WRITE 0x2 /* write */
-#define EEPROM_CMD_READ 0x3 /* read */
-#define EEPROM_CMD_STATUSREAD 0x5 /* status register read */
-#define EEPROM_CMD_WRITEENABLE 0x6 /* write enable */
-#define EEPROM_CMD_CONFIGURE 0x7 /* configure */
-
-#define EEPROM_DATAFORCOFIGURE 0x6 /* ??? */
-
-/* eeprom address */
-#define EEPROM_ADDR_SUBVID 0x0 /* Sub Vendor ID */
-#define EEPROM_ADDR_SUBSID 0x2 /* Sub System ID */
-#define EEPROM_ADDR_MACADDR 0x146 /* MAC Address */
-#define EEPROM_ADDR_LOTYPE 0x14f /* LO type */
-
-struct agnx_eeprom {
- u8 data; /* date */
- u16 address; /* address in EEPROM */
- u8 cmd; /* command, unknown, status */
-} __attribute__((__packed__));
-
-#define AGNX_EEPROM_COMMAND_SHIFT 5
-#define AGNX_EEPROM_COMMAND_STAT 0x01
-
-void disable_receiver(struct agnx_priv *priv);
-void enable_receiver(struct agnx_priv *priv);
-u8 read_from_eeprom(struct agnx_priv *priv, u16 address);
-void agnx_hw_init(struct agnx_priv *priv);
-int agnx_hw_reset(struct agnx_priv *priv);
-int agnx_set_ssid(struct agnx_priv *priv, u8 *ssid, size_t ssid_len);
-void agnx_set_bssid(struct agnx_priv *priv, const u8 *bssid);
-void enable_power_saving(struct agnx_priv *priv);
-void disable_power_saving(struct agnx_priv *priv);
-void calibrate_antenna_period(unsigned long data);
-
-#endif /* AGNX_PHY_H_ */
+++ /dev/null
-/**
- * Airgo MIMO wireless driver
- *
- * Copyright (c) 2007 Li YanBo <dreamfly281@gmail.com>
-
- * Thanks for Jeff Williams <angelbane@gmail.com> do reverse engineer
- * works and published the SPECS at http://airgo.wdwconsulting.net/mymoin
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation;
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "agnx.h"
-#include "debug.h"
-#include "phy.h"
-#include "table.h"
-
-/* FIXME! */
-static inline void spi_write(void __iomem *region, u32 chip_ids, u32 sw,
- u16 size, u32 control)
-{
- u32 reg;
- u32 lsw = sw & 0xffff; /* lower 16 bits of sw*/
- u32 msw = sw >> 16; /* high 16 bits of sw */
-
- /* FIXME Write Most Significant Word of the 32bit data to MSW */
- /* FIXME And Least Significant Word to LSW */
- iowrite32((lsw), region + AGNX_SPI_WLSW);
- iowrite32((msw), region + AGNX_SPI_WMSW);
- reg = chip_ids | size | control;
- /* Write chip id(s), write size and busy control to Control Register */
- iowrite32((reg), region + AGNX_SPI_CTL);
- /* Wait for Busy control to clear */
- spi_delay();
-}
-
-/*
- * Write to SPI Synth register
- */
-static inline void spi_sy_write(void __iomem *region, u32 chip_ids, u32 sw)
-{
- /* FIXME the size 0x15 is a magic value*/
- spi_write(region, chip_ids, sw, 0x15, SPI_BUSY_CTL);
-}
-
-/*
- * Write to SPI RF register
- */
-static inline void spi_rf_write(void __iomem *region, u32 chip_ids, u32 sw)
-{
- /* FIXME the size 0xd is a magic value*/
- spi_write(region, chip_ids, sw, 0xd, SPI_BUSY_CTL);
-} /* spi_rf_write */
-
-/*
- * Write to SPI with Read Control bit set
- */
-inline void spi_rc_write(void __iomem *region, u32 chip_ids, u32 sw)
-{
- /* FIXME the size 0xe5 is a magic value */
- spi_write(region, chip_ids, sw, 0xe5, SPI_BUSY_CTL|SPI_READ_CTL);
-}
-
-/* Get the active chains's count */
-static int get_active_chains(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- int num = 0;
- u32 reg;
- AGNX_TRACE;
-
- spi_rc_write(ctl, RF_CHIP0, 0x21);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
- if (reg == 1)
- num++;
-
- spi_rc_write(ctl, RF_CHIP1, 0x21);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
- if (reg == 1)
- num++;
-
- spi_rc_write(ctl, RF_CHIP2, 0x21);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
- if (reg == 1)
- num++;
-
- spi_rc_write(ctl, RF_CHIP0, 0x26);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
- if (0x33 != reg)
- printk(KERN_WARNING PFX "Unmatched rf chips result\n");
-
- return num;
-} /* get_active_chains */
-
-void rf_chips_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- int num;
- AGNX_TRACE;
-
- if (priv->revid == 1) {
- reg = agnx_read32(ctl, AGNX_SYSITF_GPIOUT);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_SYSITF_GPIOUT, reg);
- }
-
- /* Set SPI clock speed to 200NS */
- reg = agnx_read32(ctl, AGNX_SPI_CFG);
- reg &= ~0xF;
- reg |= 0x3;
- agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
- /* Set SPI clock speed to 50NS */
- reg = agnx_read32(ctl, AGNX_SPI_CFG);
- reg &= ~0xF;
- reg |= 0x1;
- agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1101);
-
- num = get_active_chains(priv);
- printk(KERN_INFO PFX "Active chains are %d\n", num);
-
- reg = agnx_read32(ctl, AGNX_SPI_CFG);
- reg &= ~0xF;
- agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1908);
-} /* rf_chips_init */
-
-
-static u32 channel_tbl[15][9] = {
- {0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00},
- {1, 0x00, 0x00, 0x624, 0x00, 0x1a4, 0x28, 0x00, 0x1e},
- {2, 0x00, 0x00, 0x615, 0x00, 0x1ae, 0x28, 0x00, 0x1e},
- {3, 0x00, 0x00, 0x61a, 0x00, 0x1ae, 0x28, 0x00, 0x1e},
- {4, 0x00, 0x00, 0x61f, 0x00, 0x1ae, 0x28, 0x00, 0x1e},
- {5, 0x00, 0x00, 0x624, 0x00, 0x1ae, 0x28, 0x00, 0x1e},
- {6, 0x00, 0x00, 0x61f, 0x00, 0x1b3, 0x28, 0x00, 0x1e},
- {7, 0x00, 0x00, 0x624, 0x00, 0x1b3, 0x28, 0x00, 0x1e},
- {8, 0x00, 0x00, 0x629, 0x00, 0x1b3, 0x28, 0x00, 0x1e},
- {9, 0x00, 0x00, 0x624, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
- {10, 0x00, 0x00, 0x629, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
- {11, 0x00, 0x00, 0x62e, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
- {12, 0x00, 0x00, 0x633, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
- {13, 0x00, 0x00, 0x628, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
- {14, 0x00, 0x00, 0x644, 0x00, 0x1b8, 0x28, 0x00, 0x1e},
-};
-
-
-static inline void
-channel_tbl_write(struct agnx_priv *priv, unsigned int channel, unsigned int reg_num)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- reg = channel_tbl[channel][reg_num];
- reg <<= 4;
- reg |= reg_num;
- spi_sy_write(ctl, SYNTH_CHIP, reg);
-}
-
-static void synth_freq_set(struct agnx_priv *priv, unsigned int channel)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
-
- /* Set the Clock bits to 50NS */
- reg = agnx_read32(ctl, AGNX_SPI_CFG);
- reg &= ~0xF;
- reg |= 0x1;
- agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
- /* Write 0x00c0 to LSW and 0x3 to MSW of Synth Chip */
- spi_sy_write(ctl, SYNTH_CHIP, 0x300c0);
-
- spi_sy_write(ctl, SYNTH_CHIP, 0x32);
-
- /* # Write to Register 1 on the Synth Chip */
- channel_tbl_write(priv, channel, 1);
- /* # Write to Register 3 on the Synth Chip */
- channel_tbl_write(priv, channel, 3);
- /* # Write to Register 6 on the Synth Chip */
- channel_tbl_write(priv, channel, 6);
- /* # Write to Register 5 on the Synth Chip */
- channel_tbl_write(priv, channel, 5);
- /* # Write to register 8 on the Synth Chip */
- channel_tbl_write(priv, channel, 8);
-
- /* FIXME Clear the clock bits */
- reg = agnx_read32(ctl, AGNX_SPI_CFG);
- reg &= ~0xf;
- agnx_write32(ctl, AGNX_SPI_CFG, reg);
-} /* synth_chip_init */
-
-
-static void antenna_init(struct agnx_priv *priv, int num_antenna)
-{
- void __iomem *ctl = priv->ctl;
-
- switch (num_antenna) {
- case 1:
- agnx_write32(ctl, AGNX_GCR_NLISTANT, 1);
- agnx_write32(ctl, AGNX_GCR_NMEASANT, 1);
- agnx_write32(ctl, AGNX_GCR_NACTIANT, 1);
- agnx_write32(ctl, AGNX_GCR_NCAPTANT, 1);
-
- agnx_write32(ctl, AGNX_GCR_ANTCFG, 7);
- agnx_write32(ctl, AGNX_GCR_BOACT, 34);
- agnx_write32(ctl, AGNX_GCR_BOINACT, 34);
- agnx_write32(ctl, AGNX_GCR_BODYNA, 30);
-
- agnx_write32(ctl, AGNX_GCR_THD0A, 125);
- agnx_write32(ctl, AGNX_GCR_THD0AL, 100);
- agnx_write32(ctl, AGNX_GCR_THD0B, 90);
-
- agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 80);
- agnx_write32(ctl, AGNX_GCR_SIGHTH, 100);
- agnx_write32(ctl, AGNX_GCR_SIGLTH, 16);
- break;
- case 2:
- agnx_write32(ctl, AGNX_GCR_NLISTANT, 2);
- agnx_write32(ctl, AGNX_GCR_NMEASANT, 2);
- agnx_write32(ctl, AGNX_GCR_NACTIANT, 2);
- agnx_write32(ctl, AGNX_GCR_NCAPTANT, 2);
- agnx_write32(ctl, AGNX_GCR_ANTCFG, 15);
- agnx_write32(ctl, AGNX_GCR_BOACT, 36);
- agnx_write32(ctl, AGNX_GCR_BOINACT, 36);
- agnx_write32(ctl, AGNX_GCR_BODYNA, 32);
- agnx_write32(ctl, AGNX_GCR_THD0A, 120);
- agnx_write32(ctl, AGNX_GCR_THD0AL, 100);
- agnx_write32(ctl, AGNX_GCR_THD0B, 80);
- agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 70);
- agnx_write32(ctl, AGNX_GCR_SIGHTH, 100);
- agnx_write32(ctl, AGNX_GCR_SIGLTH, 32);
- break;
- case 3:
- agnx_write32(ctl, AGNX_GCR_NLISTANT, 3);
- agnx_write32(ctl, AGNX_GCR_NMEASANT, 3);
- agnx_write32(ctl, AGNX_GCR_NACTIANT, 3);
- agnx_write32(ctl, AGNX_GCR_NCAPTANT, 3);
- agnx_write32(ctl, AGNX_GCR_ANTCFG, 31);
- agnx_write32(ctl, AGNX_GCR_BOACT, 36);
- agnx_write32(ctl, AGNX_GCR_BOINACT, 36);
- agnx_write32(ctl, AGNX_GCR_BODYNA, 32);
- agnx_write32(ctl, AGNX_GCR_THD0A, 100);
- agnx_write32(ctl, AGNX_GCR_THD0AL, 100);
- agnx_write32(ctl, AGNX_GCR_THD0B, 70);
- agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 70);
- agnx_write32(ctl, AGNX_GCR_SIGHTH, 100);
- agnx_write32(ctl, AGNX_GCR_SIGLTH, 48);
-/* agnx_write32(ctl, AGNX_GCR_SIGLTH, 16); */
- break;
- default:
- printk(KERN_WARNING PFX "Unknow antenna number\n");
- }
-} /* antenna_init */
-
-static void chain_update(struct agnx_priv *priv, u32 chain)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- spi_rc_write(ctl, RF_CHIP0, 0x20);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-
- if (reg == 0x4)
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, reg|0x1000);
- else if (reg != 0x0)
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, reg|0x1000);
- else {
- if (chain == 3 || chain == 6) {
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, reg|0x1000);
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
- } else if (chain == 2 || chain == 4) {
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, reg|0x1000);
- spi_rf_write(ctl, RF_CHIP2, 0x1005);
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x824);
- } else if (chain == 1) {
- spi_rf_write(ctl, RF_CHIP0, reg|0x1000);
- spi_rf_write(ctl, RF_CHIP1|RF_CHIP2, 0x1004);
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0xc36);
- }
- }
-
- spi_rc_write(ctl, RF_CHIP0, 0x22);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-
- switch (reg) {
- case 0:
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1005);
- break;
- case 1:
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
- break;
- case 2:
- if (chain == 6 || chain == 4) {
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1202);
- spi_rf_write(ctl, RF_CHIP2, 0x1005);
- } else if (chain < 3) {
- spi_rf_write(ctl, RF_CHIP0, 0x1202);
- spi_rf_write(ctl, RF_CHIP1|RF_CHIP2, 0x1005);
- }
- break;
- default:
- if (chain == 3) {
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1203);
- spi_rf_write(ctl, RF_CHIP2, 0x1201);
- } else if (chain == 2) {
- spi_rf_write(ctl, RF_CHIP0, 0x1203);
- spi_rf_write(ctl, RF_CHIP2, 0x1200);
- spi_rf_write(ctl, RF_CHIP1, 0x1201);
- } else if (chain == 1) {
- spi_rf_write(ctl, RF_CHIP0, 0x1203);
- spi_rf_write(ctl, RF_CHIP1|RF_CHIP2, 0x1200);
- } else if (chain == 4) {
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1203);
- spi_rf_write(ctl, RF_CHIP2, 0x1201);
- } else {
- spi_rf_write(ctl, RF_CHIP0, 0x1203);
- spi_rf_write(ctl, RF_CHIP1|RF_CHIP2, 0x1201);
- }
- }
-} /* chain_update */
-
-static void antenna_config(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- /* Write 0x0 to the TX Management Control Register Enable bit */
- reg = agnx_read32(ctl, AGNX_TXM_CTL);
- reg &= ~0x1;
- agnx_write32(ctl, AGNX_TXM_CTL, reg);
-
- /* FIXME */
- /* Set initial value based on number of Antennae */
- antenna_init(priv, 3);
-
- /* FIXME Update Power Templates for current valid Stations */
- /* sta_power_init(priv, 0);*/
-
- /* FIXME the number of chains should get from eeprom*/
- chain_update(priv, AGNX_CHAINS_MAX);
-} /* antenna_config */
-
-void calibrate_oscillator(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- spi_rc_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
- reg = agnx_read32(ctl, AGNX_GCR_GAINSET1);
- reg |= 0x10;
- agnx_write32(ctl, AGNX_GCR_GAINSET1, reg);
-
- agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 1);
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 1);
-
- agnx_write32(ctl, AGNX_ACI_LEN, 0x3ff);
-
- agnx_write32(ctl, AGNX_ACI_TIMER1, 0x27);
- agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
- /* (Residual DC Calibration) to Calibration Mode */
- agnx_write32(ctl, AGNX_ACI_MODE, 0x2);
-
- spi_rc_write(ctl, RF_CHIP0|RF_CHIP1, 0x1004);
- agnx_write32(ctl, AGNX_ACI_LEN, 0x3ff);
- /* (TX LO Calibration) to Calibration Mode */
- agnx_write32(ctl, AGNX_ACI_MODE, 0x4);
-
- do {
- u32 reg1, reg2, reg3;
- /* Enable Power Saving Control */
- enable_power_saving(priv);
- /* Save the following registers to restore */
- reg1 = ioread32(ctl + 0x11000);
- reg2 = ioread32(ctl + 0xec50);
- reg3 = ioread32(ctl + 0xec54);
- wmb();
-
- agnx_write32(ctl, 0x11000, 0xcfdf);
- agnx_write32(ctl, 0xec50, 0x70);
- /* Restore the registers */
- agnx_write32(ctl, 0x11000, reg1);
- agnx_write32(ctl, 0xec50, reg2);
- agnx_write32(ctl, 0xec54, reg3);
- /* Disable Power Saving Control */
- disable_power_saving(priv);
- } while (0);
-
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0);
-} /* calibrate_oscillator */
-
-
-static void radio_channel_set(struct agnx_priv *priv, unsigned int channel)
-{
- void __iomem *ctl = priv->ctl;
- unsigned int freq = priv->band.channels[channel - 1].center_freq;
- u32 reg;
- AGNX_TRACE;
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
- /* Set SPI Clock to 50 Ns */
- reg = agnx_read32(ctl, AGNX_SPI_CFG);
- reg &= ~0xF;
- reg |= 0x1;
- agnx_write32(ctl, AGNX_SPI_CFG, reg);
-
- /* Clear the Disable Tx interrupt bit in Interrupt Mask */
-/* reg = agnx_read32(ctl, AGNX_INT_MASK); */
-/* reg &= ~IRQ_TX_DISABLE; */
-/* agnx_write32(ctl, AGNX_INT_MASK, reg); */
-
- /* Band Selection */
- reg = agnx_read32(ctl, AGNX_SYSITF_GPIOUT);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_SYSITF_GPIOUT, reg);
-
- /* FIXME Set the SiLabs Chip Frequency */
- synth_freq_set(priv, channel);
-
- reg = agnx_read32(ctl, AGNX_PM_SOFTRST);
- reg |= 0x80100030;
- agnx_write32(ctl, AGNX_PM_SOFTRST, reg);
- reg = agnx_read32(ctl, AGNX_PM_PLLCTL);
- reg |= 0x20009;
- agnx_write32(ctl, AGNX_PM_PLLCTL, reg);
-
- agnx_write32(ctl, AGNX_SYSITF_GPIOUT, 0x5);
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1100);
-
- /* Load the MonitorGain Table */
- monitor_gain_table_init(priv);
-
- /* Load the TX Fir table */
- tx_fir_table_init(priv);
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg |= 0x8;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
-
- spi_rc_write(ctl, RF_CHIP0|RF_CHIP1, 0x22);
- udelay(80);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
-
-
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0xff);
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-
- reg = agnx_read32(ctl, 0xec50);
- reg |= 0x4f;
- agnx_write32(ctl, 0xec50, reg);
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
- agnx_write32(ctl, 0x11008, 0x1);
- agnx_write32(ctl, 0x1100c, 0x0);
- agnx_write32(ctl, 0x11008, 0x0);
- agnx_write32(ctl, 0xec50, 0xc);
-
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
- agnx_write32(ctl, 0x11010, 0x6e);
- agnx_write32(ctl, 0x11014, 0x6c);
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1201);
-
- /* Calibrate the Antenna */
- /* antenna_calibrate(priv); */
- /* Calibrate the TxLocalOscillator */
- calibrate_oscillator(priv);
-
- reg = agnx_read32(ctl, AGNX_PM_PMCTL);
- reg &= ~0x8;
- agnx_write32(ctl, AGNX_PM_PMCTL, reg);
- agnx_write32(ctl, AGNX_GCR_GAININIT, 0xa);
- agnx_write32(ctl, AGNX_GCR_THCD, 0x0);
-
- agnx_write32(ctl, 0x11018, 0xb);
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x0);
-
- /* Write Frequency to Gain Control Channel */
- agnx_write32(ctl, AGNX_GCR_RXCHANEL, freq);
- /* Write 0x140000/Freq to 0x9c08 */
- reg = 0x140000/freq;
- agnx_write32(ctl, 0x9c08, reg);
-
- reg = agnx_read32(ctl, AGNX_PM_SOFTRST);
- reg &= ~0x80100030;
- agnx_write32(ctl, AGNX_PM_SOFTRST, reg);
-
- reg = agnx_read32(ctl, AGNX_PM_PLLCTL);
- reg &= ~0x20009;
- reg |= 0x1;
- agnx_write32(ctl, AGNX_PM_PLLCTL, reg);
-
- agnx_write32(ctl, AGNX_ACI_MODE, 0x0);
-
-/* FIXME According to Number of Chains: */
-
-/* 1. 1: */
-/* 1. Write 0x1203 to RF Chip 0 */
-/* 2. Write 0x1200 to RF Chips 1 +2 */
-/* 2. 2: */
-/* 1. Write 0x1203 to RF Chip 0 */
-/* 2. Write 0x1200 to RF Chip 2 */
-/* 3. Write 0x1201 to RF Chip 1 */
-/* 3. 3: */
-/* 1. Write 0x1203 to RF Chip 0 */
-/* 2. Write 0x1201 to RF Chip 1 + 2 */
-/* 4. 4: */
-/* 1. Write 0x1203 to RF Chip 0 + 1 */
-/* 2. Write 0x1200 to RF Chip 2 */
-
-/* 5. 6: */
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1, 0x1203);
- spi_rf_write(ctl, RF_CHIP2, 0x1201);
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1000);
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-
- /* FIXME Set the Disable Tx interrupt bit in Interrupt Mask
- (Or 0x20000 to Interrupt Mask) */
-/* reg = agnx_read32(ctl, AGNX_INT_MASK); */
-/* reg |= IRQ_TX_DISABLE; */
-/* agnx_write32(ctl, AGNX_INT_MASK, reg); */
-
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-
- /* Configure the Antenna */
- antenna_config(priv);
-
- /* Write 0x0 to Discovery Mode Enable detect G, B, A packet? */
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0);
-
- reg = agnx_read32(ctl, AGNX_RXM_REQRATE);
- reg |= 0x80000000;
- agnx_write32(ctl, AGNX_RXM_REQRATE, reg);
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-
- /* enable radio on and the power LED */
- reg = agnx_read32(ctl, AGNX_SYSITF_GPIOUT);
- reg &= ~0x1;
- reg |= 0x2;
- agnx_write32(ctl, AGNX_SYSITF_GPIOUT, reg);
-
- reg = agnx_read32(ctl, AGNX_TXM_CTL);
- reg |= 0x1;
- agnx_write32(ctl, AGNX_TXM_CTL, reg);
-} /* radio_channel_set */
-
-static void base_band_filter_calibrate(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1700);
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1001);
- agnx_write32(ctl, AGNX_GCR_FORCECTLCLK, 0x0);
- spi_rc_write(ctl, RF_CHIP0, 0x27);
- spi_rc_write(ctl, RF_CHIP1, 0x27);
- spi_rc_write(ctl, RF_CHIP2, 0x27);
- agnx_write32(ctl, AGNX_GCR_FORCECTLCLK, 0x1);
-}
-
-static void print_offset(struct agnx_priv *priv, u32 chain)
-{
- void __iomem *ctl = priv->ctl;
- u32 offset;
-
- iowrite32((chain), ctl + AGNX_ACI_SELCHAIN);
- udelay(10);
- offset = (ioread32(ctl + AGNX_ACI_OFFSET));
- printk(PFX "Chain is 0x%x, Offset is 0x%x\n", chain, offset);
-}
-
-void print_offsets(struct agnx_priv *priv)
-{
- print_offset(priv, 0);
- print_offset(priv, 4);
- print_offset(priv, 1);
- print_offset(priv, 5);
- print_offset(priv, 2);
- print_offset(priv, 6);
-}
-
-
-struct chains {
- u32 cali; /* calibrate value*/
-
-#define NEED_CALIBRATE 0
-#define SUCCESS_CALIBRATE 1
- int status;
-};
-
-static void chain_calibrate(struct agnx_priv *priv, struct chains *chains,
- unsigned int num)
-{
- void __iomem *ctl = priv->ctl;
- u32 calibra = chains[num].cali;
-
- if (num < 3)
- calibra |= 0x1400;
- else
- calibra |= 0x1500;
-
- switch (num) {
- case 0:
- case 4:
- spi_rf_write(ctl, RF_CHIP0, calibra);
- break;
- case 1:
- case 5:
- spi_rf_write(ctl, RF_CHIP1, calibra);
- break;
- case 2:
- case 6:
- spi_rf_write(ctl, RF_CHIP2, calibra);
- break;
- default:
- BUG();
- }
-} /* chain_calibrate */
-
-static inline void get_calibrete_value(struct agnx_priv *priv, struct chains *chains,
- unsigned int num)
-{
- void __iomem *ctl = priv->ctl;
- u32 offset;
-
- iowrite32((num), ctl + AGNX_ACI_SELCHAIN);
- /* FIXME */
- udelay(10);
- offset = (ioread32(ctl + AGNX_ACI_OFFSET));
-
- if (offset < 0xf) {
- chains[num].status = SUCCESS_CALIBRATE;
- return;
- }
-
- if (num == 0 || num == 1 || num == 2) {
- if (0 == chains[num].cali)
- chains[num].cali = 0xff;
- else
- chains[num].cali--;
- } else
- chains[num].cali++;
-
- chains[num].status = NEED_CALIBRATE;
-}
-
-static inline void calibra_delay(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- unsigned int i = 100;
-
- wmb();
- while (--i) {
- reg = (ioread32(ctl + AGNX_ACI_STATUS));
- if (reg == 0x4000)
- break;
- udelay(10);
- }
- if (!i)
- printk(PFX "calibration failed\n");
-}
-
-void do_calibration(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- struct chains chains[7];
- unsigned int i, j;
- AGNX_TRACE;
-
- for (i = 0; i < 7; i++) {
- if (i == 3)
- continue;
-
- chains[i].cali = 0x7f;
- chains[i].status = NEED_CALIBRATE;
- }
-
- /* FIXME 0x300 is a magic number */
- for (j = 0; j < 0x300; j++) {
- if (chains[0].status == SUCCESS_CALIBRATE &&
- chains[1].status == SUCCESS_CALIBRATE &&
- chains[2].status == SUCCESS_CALIBRATE &&
- chains[4].status == SUCCESS_CALIBRATE &&
- chains[5].status == SUCCESS_CALIBRATE &&
- chains[6].status == SUCCESS_CALIBRATE)
- break;
-
- /* Attention, there is no chain 3 */
- for (i = 0; i < 7; i++) {
- if (i == 3)
- continue;
- if (chains[i].status == NEED_CALIBRATE)
- chain_calibrate(priv, chains, i);
- }
- /* Write 0x1 to Calibration Measure */
- iowrite32((0x1), ctl + AGNX_ACI_MEASURE);
- calibra_delay(priv);
-
- for (i = 0; i < 7; i++) {
- if (i == 3)
- continue;
-
- get_calibrete_value(priv, chains, i);
- }
- }
- printk(PFX "Clibrate times is %d\n", j);
- print_offsets(priv);
-} /* do_calibration */
-
-void antenna_calibrate(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
- AGNX_TRACE;
-
- agnx_write32(ctl, AGNX_GCR_NLISTANT, 0x3);
- agnx_write32(ctl, AGNX_GCR_NMEASANT, 0x3);
- agnx_write32(ctl, AGNX_GCR_NACTIANT, 0x3);
- agnx_write32(ctl, AGNX_GCR_NCAPTANT, 0x3);
-
- agnx_write32(ctl, AGNX_GCR_ANTCFG, 0x1f);
- agnx_write32(ctl, AGNX_GCR_BOACT, 0x24);
- agnx_write32(ctl, AGNX_GCR_BOINACT, 0x24);
- agnx_write32(ctl, AGNX_GCR_BODYNA, 0x20);
- agnx_write32(ctl, AGNX_GCR_THD0A, 0x64);
- agnx_write32(ctl, AGNX_GCR_THD0AL, 0x64);
- agnx_write32(ctl, AGNX_GCR_THD0B, 0x46);
- agnx_write32(ctl, AGNX_GCR_THD0BTFEST, 0x3c);
- agnx_write32(ctl, AGNX_GCR_SIGHTH, 0x64);
- agnx_write32(ctl, AGNX_GCR_SIGLTH, 0x30);
-
- spi_rc_write(ctl, RF_CHIP0, 0x20);
- /* Fixme */
- udelay(80);
- /* 1. Should read 0x0 */
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
- if (0x0 != reg)
- printk(KERN_WARNING PFX "Unmatched rf chips result\n");
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1000);
-
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-
- spi_rc_write(ctl, RF_CHIP0, 0x22);
- udelay(80);
- reg = agnx_read32(ctl, AGNX_SPI_RLSW);
- if (0x0 != reg)
- printk(KERN_WARNING PFX "Unmatched rf chips result\n");
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1005);
-
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x1);
- agnx_write32(ctl, AGNX_GCR_RSTGCTL, 0x0);
-
- reg = agnx_read32(ctl, AGNX_PM_SOFTRST);
- reg |= 0x1c000032;
- agnx_write32(ctl, AGNX_PM_SOFTRST, reg);
- reg = agnx_read32(ctl, AGNX_PM_PLLCTL);
- reg |= 0x0003f07;
- agnx_write32(ctl, AGNX_PM_PLLCTL, reg);
-
- reg = agnx_read32(ctl, 0xec50);
- reg |= 0x40;
- agnx_write32(ctl, 0xec50, reg);
-
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0xff8);
- agnx_write32(ctl, AGNX_GCR_DISCOVMOD, 0x3);
-
- agnx_write32(ctl, AGNX_GCR_CHAINNUM, 0x6);
- agnx_write32(ctl, 0x19874, 0x0);
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1700);
-
- /* Calibrate the BaseBandFilter */
- base_band_filter_calibrate(priv);
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1002);
-
- agnx_write32(ctl, AGNX_GCR_GAINSET0, 0x1d);
- agnx_write32(ctl, AGNX_GCR_GAINSET1, 0x1d);
- agnx_write32(ctl, AGNX_GCR_GAINSET2, 0x1d);
- agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 0x1);
-
- agnx_write32(ctl, AGNX_ACI_MODE, 0x1);
- agnx_write32(ctl, AGNX_ACI_LEN, 0x3ff);
-
- agnx_write32(ctl, AGNX_ACI_TIMER1, 0x27);
- agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
-
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1400);
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1500);
-
- /* Measure Calibration */
- agnx_write32(ctl, AGNX_ACI_MEASURE, 0x1);
- calibra_delay(priv);
-
- /* do calibration */
- do_calibration(priv);
-
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
- agnx_write32(ctl, AGNX_ACI_TIMER1, 0x21);
- agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
- agnx_write32(ctl, AGNX_ACI_LEN, 0xf);
-
- reg = agnx_read32(ctl, AGNX_GCR_GAINSET0);
- reg &= 0xf;
- agnx_write32(ctl, AGNX_GCR_GAINSET0, reg);
- reg = agnx_read32(ctl, AGNX_GCR_GAINSET1);
- reg &= 0xf;
- agnx_write32(ctl, AGNX_GCR_GAINSET1, reg);
- reg = agnx_read32(ctl, AGNX_GCR_GAINSET2);
- reg &= 0xf;
- agnx_write32(ctl, AGNX_GCR_GAINSET2, reg);
-
- agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 0x0);
- disable_receiver(priv);
-} /* antenna_calibrate */
-
-void __antenna_calibrate(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- /* Calibrate the BaseBandFilter */
- /* base_band_filter_calibrate(priv); */
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1002);
-
-
- agnx_write32(ctl, AGNX_GCR_GAINSET0, 0x1d);
- agnx_write32(ctl, AGNX_GCR_GAINSET1, 0x1d);
- agnx_write32(ctl, AGNX_GCR_GAINSET2, 0x1d);
-
- agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 0x1);
-
- agnx_write32(ctl, AGNX_ACI_MODE, 0x1);
- agnx_write32(ctl, AGNX_ACI_LEN, 0x3ff);
-
-
- agnx_write32(ctl, AGNX_ACI_TIMER1, 0x27);
- agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1400);
- spi_rf_write(ctl, RF_CHIP0|RF_CHIP1|RF_CHIP2, 0x1500);
- /* Measure Calibration */
- agnx_write32(ctl, AGNX_ACI_MEASURE, 0x1);
- calibra_delay(priv);
- do_calibration(priv);
- agnx_write32(ctl, AGNX_GCR_RXOVERIDE, 0x0);
-
- agnx_write32(ctl, AGNX_ACI_TIMER1, 0x21);
- agnx_write32(ctl, AGNX_ACI_TIMER2, 0x27);
-
- agnx_write32(ctl, AGNX_ACI_LEN, 0xf);
-
- reg = agnx_read32(ctl, AGNX_GCR_GAINSET0);
- reg &= 0xf;
- agnx_write32(ctl, AGNX_GCR_GAINSET0, reg);
- reg = agnx_read32(ctl, AGNX_GCR_GAINSET1);
- reg &= 0xf;
- agnx_write32(ctl, AGNX_GCR_GAINSET1, reg);
- reg = agnx_read32(ctl, AGNX_GCR_GAINSET2);
- reg &= 0xf;
- agnx_write32(ctl, AGNX_GCR_GAINSET2, reg);
-
-
- agnx_write32(ctl, AGNX_GCR_GAINSETWRITE, 0x0);
-
- /* Write 0x3 Gain Control Discovery Mode */
- enable_receiver(priv);
-}
-
-int agnx_set_channel(struct agnx_priv *priv, unsigned int channel)
-{
- AGNX_TRACE;
-
- printk(KERN_ERR PFX "Channel is %d %s\n", channel, __func__);
- radio_channel_set(priv, channel);
- return 0;
-}
+++ /dev/null
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include "phy.h"
-#include "sta.h"
-#include "debug.h"
-
-void hash_read(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id)
-{
- void __iomem *ctl = priv->ctl;
-
- reglo &= 0xFFFF;
- reglo |= 0x30000000;
- reglo |= 0x40000000; /* Set status busy */
- reglo |= sta_id << 16;
-
- iowrite32(0, ctl + AGNX_RXM_HASH_CMD_FLAG);
- iowrite32(reghi, ctl + AGNX_RXM_HASH_CMD_HIGH);
- iowrite32(reglo, ctl + AGNX_RXM_HASH_CMD_LOW);
-
- reghi = ioread32(ctl + AGNX_RXM_HASH_CMD_HIGH);
- reglo = ioread32(ctl + AGNX_RXM_HASH_CMD_LOW);
- printk(PFX "RX hash cmd are : %.8x%.8x\n", reghi, reglo);
-}
-
-void hash_write(struct agnx_priv *priv, const u8 *mac_addr, u8 sta_id)
-{
- void __iomem *ctl = priv->ctl;
- u32 reghi, reglo;
-
- if (!is_valid_ether_addr(mac_addr))
- printk(KERN_WARNING PFX "Update hash table: Invalid hwaddr!\n");
-
- reghi = mac_addr[0] << 24 | mac_addr[1] << 16 | mac_addr[2] << 8 | mac_addr[3];
- reglo = mac_addr[4] << 8 | mac_addr[5];
- reglo |= 0x10000000; /* Set hash commmand */
- reglo |= 0x40000000; /* Set status busy */
- reglo |= sta_id << 16;
-
- iowrite32(0, ctl + AGNX_RXM_HASH_CMD_FLAG);
- iowrite32(reghi, ctl + AGNX_RXM_HASH_CMD_HIGH);
- iowrite32(reglo, ctl + AGNX_RXM_HASH_CMD_LOW);
-
- reglo = ioread32(ctl + AGNX_RXM_HASH_CMD_LOW);
- if (!(reglo & 0x80000000))
- printk(KERN_WARNING PFX "Update hash table failed\n");
-}
-
-void hash_delete(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id)
-{
- void __iomem *ctl = priv->ctl;
-
- reglo &= 0xFFFF;
- reglo |= 0x20000000;
- reglo |= 0x40000000; /* Set status busy */
- reglo |= sta_id << 16;
-
- iowrite32(0, ctl + AGNX_RXM_HASH_CMD_FLAG);
- iowrite32(reghi, ctl + AGNX_RXM_HASH_CMD_HIGH);
- iowrite32(reglo, ctl + AGNX_RXM_HASH_CMD_LOW);
- reghi = ioread32(ctl + AGNX_RXM_HASH_CMD_HIGH);
-
- reglo = ioread32(ctl + AGNX_RXM_HASH_CMD_LOW);
- printk(PFX "RX hash cmd are : %.8x%.8x\n", reghi, reglo);
-
-}
-
-void hash_dump(struct agnx_priv *priv, u8 sta_id)
-{
- void __iomem *ctl = priv->ctl;
- u32 reghi, reglo;
-
- reglo = 0x40000000; /* status bit */
- iowrite32(reglo, ctl + AGNX_RXM_HASH_CMD_LOW);
- iowrite32(sta_id << 16, ctl + AGNX_RXM_HASH_DUMP_DATA);
-
- udelay(80);
-
- reghi = ioread32(ctl + AGNX_RXM_HASH_CMD_HIGH);
- reglo = ioread32(ctl + AGNX_RXM_HASH_CMD_LOW);
- printk(PFX "hash cmd are : %.8x%.8x\n", reghi, reglo);
- reghi = ioread32(ctl + AGNX_RXM_HASH_CMD_FLAG);
- printk(PFX "hash flag is : %.8x\n", reghi);
- reghi = ioread32(ctl + AGNX_RXM_HASH_DUMP_MST);
- reglo = ioread32(ctl + AGNX_RXM_HASH_DUMP_LST);
- printk(PFX "hash dump mst lst: %.8x%.8x\n", reghi, reglo);
- reghi = ioread32(ctl + AGNX_RXM_HASH_DUMP_DATA);
- printk(PFX "hash dump data: %.8x\n", reghi);
-}
-
-void get_sta_power(struct agnx_priv *priv, struct agnx_sta_power *power, unsigned int sta_idx)
-{
- void __iomem *ctl = priv->ctl;
- memcpy_fromio(power, ctl + AGNX_TXM_STAPOWTEMP + sizeof(*power) * sta_idx,
- sizeof(*power));
-}
-
-inline void
-set_sta_power(struct agnx_priv *priv, struct agnx_sta_power *power, unsigned int sta_idx)
-{
- void __iomem *ctl = priv->ctl;
- /* FIXME 2. Write Template to offset + station number */
- memcpy_toio(ctl + AGNX_TXM_STAPOWTEMP + sizeof(*power) * sta_idx,
- power, sizeof(*power));
-}
-
-
-void get_sta_tx_wq(struct agnx_priv *priv, struct agnx_sta_tx_wq *tx_wq,
- unsigned int sta_idx, unsigned int wq_idx)
-{
- void __iomem *data = priv->data;
- memcpy_fromio(tx_wq, data + AGNX_PDU_TX_WQ + sizeof(*tx_wq) * STA_TX_WQ_NUM * sta_idx +
- sizeof(*tx_wq) * wq_idx, sizeof(*tx_wq));
-
-}
-
-inline void set_sta_tx_wq(struct agnx_priv *priv, struct agnx_sta_tx_wq *tx_wq,
- unsigned int sta_idx, unsigned int wq_idx)
-{
- void __iomem *data = priv->data;
- memcpy_toio(data + AGNX_PDU_TX_WQ + sizeof(*tx_wq) * STA_TX_WQ_NUM * sta_idx +
- sizeof(*tx_wq) * wq_idx, tx_wq, sizeof(*tx_wq));
-}
-
-
-void get_sta(struct agnx_priv *priv, struct agnx_sta *sta, unsigned int sta_idx)
-{
- void __iomem *data = priv->data;
-
- memcpy_fromio(sta, data + AGNX_PDUPOOL + sizeof(*sta) * sta_idx,
- sizeof(*sta));
-}
-
-inline void set_sta(struct agnx_priv *priv, struct agnx_sta *sta, unsigned int sta_idx)
-{
- void __iomem *data = priv->data;
-
- memcpy_toio(data + AGNX_PDUPOOL + sizeof(*sta) * sta_idx,
- sta, sizeof(*sta));
-}
-
-/* FIXME */
-void sta_power_init(struct agnx_priv *priv, unsigned int sta_idx)
-{
- struct agnx_sta_power power;
- u32 reg;
- AGNX_TRACE;
-
- memset(&power, 0, sizeof(power));
- reg = agnx_set_bits(EDCF, EDCF_SHIFT, 0x1);
- power.reg = cpu_to_le32(reg);
- set_sta_power(priv, &power, sta_idx);
- udelay(40);
-} /* add_power_template */
-
-
-/* @num: The #number of station that is visible to the card */
-static void sta_tx_workqueue_init(struct agnx_priv *priv, unsigned int sta_idx)
-{
- struct agnx_sta_tx_wq tx_wq;
- u32 reg;
- unsigned int i;
-
- memset(&tx_wq, 0, sizeof(tx_wq));
-
- reg = agnx_set_bits(WORK_QUEUE_VALID, WORK_QUEUE_VALID_SHIFT, 1);
- reg |= agnx_set_bits(WORK_QUEUE_ACK_TYPE, WORK_QUEUE_ACK_TYPE_SHIFT, 1);
-/* reg |= agnx_set_bits(WORK_QUEUE_ACK_TYPE, WORK_QUEUE_ACK_TYPE_SHIFT, 0); */
- tx_wq.reg2 |= cpu_to_le32(reg);
-
- /* Suppose all 8 traffic class are used */
- for (i = 0; i < STA_TX_WQ_NUM; i++)
- set_sta_tx_wq(priv, &tx_wq, sta_idx, i);
-} /* sta_tx_workqueue_init */
-
-
-static void sta_traffic_init(struct agnx_sta_traffic *traffic)
-{
- u32 reg;
- memset(traffic, 0, sizeof(*traffic));
-
- reg = agnx_set_bits(NEW_PACKET, NEW_PACKET_SHIFT, 1);
- reg |= agnx_set_bits(TRAFFIC_VALID, TRAFFIC_VALID_SHIFT, 1);
-/* reg |= agnx_set_bits(TRAFFIC_ACK_TYPE, TRAFFIC_ACK_TYPE_SHIFT, 1); */
- traffic->reg0 = cpu_to_le32(reg);
-
- /* 3. setting RX Sequence Number to 4095 */
- reg = agnx_set_bits(RX_SEQUENCE_NUM, RX_SEQUENCE_NUM_SHIFT, 4095);
- traffic->reg1 = cpu_to_le32(reg);
-}
-
-
-/* @num: The #number of station that is visible to the card */
-void sta_init(struct agnx_priv *priv, unsigned int sta_idx)
-{
- /* FIXME the length of sta is 256 bytes Is that
- * dangerous to stack overflow? */
- struct agnx_sta sta;
- u32 reg;
- int i;
-
- memset(&sta, 0, sizeof(sta));
- /* Set valid to 1 */
- reg = agnx_set_bits(STATION_VALID, STATION_VALID_SHIFT, 1);
- /* Set Enable Concatenation to 0 (?) */
- reg |= agnx_set_bits(ENABLE_CONCATENATION, ENABLE_CONCATENATION_SHIFT, 0);
- /* Set Enable Decompression to 0 (?) */
- reg |= agnx_set_bits(ENABLE_DECOMPRESSION, ENABLE_DECOMPRESSION_SHIFT, 0);
- sta.reg = cpu_to_le32(reg);
-
- /* Initialize each of the Traffic Class Structures by: */
- for (i = 0; i < 8; i++)
- sta_traffic_init(sta.traffic + i);
-
- set_sta(priv, &sta, sta_idx);
- sta_tx_workqueue_init(priv, sta_idx);
-} /* sta_descriptor_init */
-
-
+++ /dev/null
-#ifndef AGNX_STA_H_
-#define AGNX_STA_H_
-
-#define STA_TX_WQ_NUM 8 /* The number of TX workqueue one STA has */
-
-struct agnx_hash_cmd {
- __be32 cmdhi;
-#define MACLO 0xFFFF0000
-#define MACLO_SHIFT 16
-#define STA_ID 0x0000FFF0
-#define STA_ID_SHIFT 4
-#define CMD 0x0000000C
-#define CMD_SHIFT 2
-#define STATUS 0x00000002
-#define STATUS_SHIFT 1
-#define PASS 0x00000001
-#define PASS_SHIFT 1
- __be32 cmdlo;
-} __attribute__((__packed__));
-
-
-/*
- * Station Power Template
- * FIXME Just for agn100 yet
- */
-struct agnx_sta_power {
- __le32 reg;
-#define SIGNAL 0x000000FF /* signal */
-#define SIGNAL_SHIFT 0
-#define RATE 0x00000F00
-#define RATE_SHIFT 8
-#define TIFS 0x00001000
-#define TIFS_SHIFT 12
-#define EDCF 0x00002000
-#define EDCF_SHIFT 13
-#define CHANNEL_BOND 0x00004000
-#define CHANNEL_BOND_SHIFT 14
-#define PHY_MODE 0x00038000
-#define PHY_MODE_SHIFT 15
-#define POWER_LEVEL 0x007C0000
-#define POWER_LEVEL_SHIFT 18
-#define NUM_TRANSMITTERS 0x00800000
-#define NUM_TRANSMITTERS_SHIFT 23
-} __attribute__((__packed__));
-
-/*
- * TX Workqueue Descriptor
- */
-struct agnx_sta_tx_wq {
- __le32 reg0;
-#define HEAD_POINTER_LOW 0xFF000000 /* Head pointer low */
-#define HEAD_POINTER_LOW_SHIFT 24
-#define TAIL_POINTER 0x00FFFFFF /* Tail pointer */
-#define TAIL_POINTER_SHIFT 0
-
- __le32 reg3;
-#define ACK_POINTER_LOW 0xFFFF0000 /* ACK pointer low */
-#define ACK_POINTER_LOW_SHIFT 16
-#define HEAD_POINTER_HIGH 0x0000FFFF /* Head pointer high */
-#define HEAD_POINTER_HIGH_SHIFT 0
-
- __le32 reg1;
-/* ACK timeout tail packet count */
-#define ACK_TIMOUT_TAIL_PACK_CNT 0xFFF00000
-#define ACK_TIMOUT_TAIL_PACK_CNT_SHIFT 20
-/* Head timeout tail packet count */
-#define HEAD_TIMOUT_TAIL_PACK_CNT 0x000FFF00
-#define HEAD_TIMOUT_TAIL_PACK_CNT_SHIFT 8
-#define ACK_POINTER_HIGH 0x000000FF /* ACK pointer high */
-#define ACK_POINTER_HIGH_SHIFT 0
-
- __le32 reg2;
-#define WORK_QUEUE_VALID 0x80000000 /* valid */
-#define WORK_QUEUE_VALID_SHIFT 31
-#define WORK_QUEUE_ACK_TYPE 0x40000000 /* ACK type */
-#define WORK_QUEUE_ACK_TYPE_SHIFT 30
-/* Head timeout window limit fragmentation count */
-#define HEAD_TIMOUT_WIN_LIM_FRAG_CNT 0x3FFF0000
-#define HEAD_TIMOUT_WIN_LIM_FRAG_CNT_SHIFT 16
-/* Head timeout window limit byte count */
-#define HEAD_TIMOUT_WIN_LIM_BYTE_CNT 0x0000FFFF
-#define HEAD_TIMOUT_WIN_LIM_BYTE_CNT_SHIFT 0
-} __attribute__((__packed__));
-
-
-/*
- * Traffic Class Structure
- */
-struct agnx_sta_traffic {
- __le32 reg0;
-#define ACK_TIMOUT_CNT 0xFF800000 /* ACK Timeout Counts */
-#define ACK_TIMOUT_CNT_SHIFT 23
-#define TRAFFIC_ACK_TYPE 0x00600000 /* ACK Type */
-#define TRAFFIC_ACK_TYPE_SHIFT 21
-#define NEW_PACKET 0x00100000 /* New Packet */
-#define NEW_PACKET_SHIFT 20
-#define TRAFFIC_VALID 0x00080000 /* Valid */
-#define TRAFFIC_VALID_SHIFT 19
-#define RX_HDR_DESC_POINTER 0x0007FFFF /* RX Header Descripter pointer */
-#define RX_HDR_DESC_POINTER_SHIFT 0
-
- __le32 reg1;
-#define RX_PACKET_TIMESTAMP 0xFFFF0000 /* RX Packet Timestamp */
-#define RX_PACKET_TIMESTAMP_SHIFT 16
-#define TRAFFIC_RESERVED 0x0000E000 /* Reserved */
-#define TRAFFIC_RESERVED_SHIFT 13
-#define SV 0x00001000 /* sv */
-#define SV_SHIFT 12
-#define RX_SEQUENCE_NUM 0x00000FFF /* RX Sequence Number */
-#define RX_SEQUENCE_NUM_SHIFT 0
-
- __le32 tx_replay_cnt_low; /* TX Replay Counter Low */
-
- __le16 tx_replay_cnt_high; /* TX Replay Counter High */
- __le16 rx_replay_cnt_high; /* RX Replay Counter High */
-
- __be32 rx_replay_cnt_low; /* RX Replay Counter Low */
-} __attribute__((__packed__));
-
-/*
- * Station Descriptors
- */
-struct agnx_sta {
- __le32 tx_session_keys[4]; /* Transmit Session Key (0-3) */
- __le32 rx_session_keys[4]; /* Receive Session Key (0-3) */
-
- __le32 reg;
-#define ID_1 0xC0000000 /* id 1 */
-#define ID_1_SHIFT 30
-#define ID_0 0x30000000 /* id 0 */
-#define ID_0_SHIFT 28
-#define ENABLE_CONCATENATION 0x0FF00000 /* Enable concatenation */
-#define ENABLE_CONCATENATION_SHIFT 20
-#define ENABLE_DECOMPRESSION 0x000FF000 /* Enable decompression */
-#define ENABLE_DECOMPRESSION_SHIFT 12
-#define STA_RESERVED 0x00000C00 /* Reserved */
-#define STA_RESERVED_SHIFT 10
-#define EAP 0x00000200 /* EAP */
-#define EAP_SHIFT 9
-#define ED_NULL 0x00000100 /* ED NULL */
-#define ED_NULL_SHIFT 8
-#define ENCRYPTION_POLICY 0x000000E0 /* Encryption Policy */
-#define ENCRYPTION_POLICY_SHIFT 5
-#define DEFINED_KEY_ID 0x00000018 /* Defined Key ID */
-#define DEFINED_KEY_ID_SHIFT 3
-#define FIXED_KEY 0x00000004 /* Fixed Key */
-#define FIXED_KEY_SHIFT 2
-#define KEY_VALID 0x00000002 /* Key Valid */
-#define KEY_VALID_SHIFT 1
-#define STATION_VALID 0x00000001 /* Station Valid */
-#define STATION_VALID_SHIFT 0
-
- __le32 tx_aes_blks_unicast; /* TX AES Blks Unicast */
- __le32 rx_aes_blks_unicast; /* RX AES Blks Unicast */
-
- __le16 aes_format_err_unicast_cnt; /* AES Format Error Unicast Counts */
- __le16 aes_replay_unicast; /* AES Replay Unicast */
-
- __le16 aes_decrypt_err_unicast; /* AES Decrypt Error Unicast */
- __le16 aes_decrypt_err_default; /* AES Decrypt Error default */
-
- __le16 single_retry_packets; /* Single Retry Packets */
- __le16 failed_tx_packets; /* Failed Tx Packets */
-
- __le16 muti_retry_packets; /* Multiple Retry Packets */
- __le16 ack_timeouts; /* ACK Timeouts */
-
- __le16 frag_tx_cnt; /* Fragment TX Counts */
- __le16 rts_brq_sent; /* RTS Brq Sent */
-
- __le16 tx_packets; /* TX Packets */
- __le16 cts_back_timeout; /* CTS Back Timeout */
-
- __le32 phy_stats_high; /* PHY Stats High */
- __le32 phy_stats_low; /* PHY Stats Low */
-
- struct agnx_sta_traffic traffic[8]; /* Traffic Class Structure (8) */
-
- __le16 traffic_class0_frag_success; /* Traffic Class 0 Fragment Success */
- __le16 traffic_class1_frag_success; /* Traffic Class 1 Fragment Success */
- __le16 traffic_class2_frag_success; /* Traffic Class 2 Fragment Success */
- __le16 traffic_class3_frag_success; /* Traffic Class 3 Fragment Success */
- __le16 traffic_class4_frag_success; /* Traffic Class 4 Fragment Success */
- __le16 traffic_class5_frag_success; /* Traffic Class 5 Fragment Success */
- __le16 traffic_class6_frag_success; /* Traffic Class 6 Fragment Success */
- __le16 traffic_class7_frag_success; /* Traffic Class 7 Fragment Success */
-
- __le16 num_frag_non_prime_rates; /* number of Fragments for non-prime rates */
- __le16 ack_timeout_non_prime_rates; /* ACK Timeout for non-prime rates */
-
-} __attribute__((__packed__));
-
-
-struct agnx_beacon_hdr {
- struct agnx_sta_power power; /* Tx Station Power Template */
- u8 phy_hdr[6]; /* PHY Hdr */
- u8 frame_len_lo; /* Frame Length Lo */
- u8 frame_len_hi; /* Frame Length Hi */
- u8 mac_hdr[24]; /* MAC Header */
- /* FIXME */
- /* 802.11(abg) beacon */
-} __attribute__((__packed__));
-
-void hash_write(struct agnx_priv *priv, const u8 *mac_addr, u8 sta_id);
-void hash_dump(struct agnx_priv *priv, u8 sta_id);
-void hash_read(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id);
-void hash_delete(struct agnx_priv *priv, u32 reghi, u32 reglo, u8 sta_id);
-
-void get_sta_power(struct agnx_priv *priv, struct agnx_sta_power *power, unsigned int sta_idx);
-void set_sta_power(struct agnx_priv *priv, struct agnx_sta_power *power,
- unsigned int sta_idx);
-void get_sta_tx_wq(struct agnx_priv *priv, struct agnx_sta_tx_wq *tx_wq,
- unsigned int sta_idx, unsigned int wq_idx);
-void set_sta_tx_wq(struct agnx_priv *priv, struct agnx_sta_tx_wq *tx_wq,
- unsigned int sta_idx, unsigned int wq_idx);
-void get_sta(struct agnx_priv *priv, struct agnx_sta *sta, unsigned int sta_idx);
-void set_sta(struct agnx_priv *priv, struct agnx_sta *sta, unsigned int sta_idx);
-
-void sta_power_init(struct agnx_priv *priv, unsigned int num);
-void sta_init(struct agnx_priv *priv, unsigned int num);
-
-#endif /* AGNX_STA_H_ */
+++ /dev/null
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "agnx.h"
-#include "debug.h"
-#include "phy.h"
-
-static const u32
-tx_fir_table[] = { 0x19, 0x5d, 0xce, 0x151, 0x1c3, 0x1ff, 0x1ea, 0x17c, 0xcf,
- 0x19, 0x38e, 0x350, 0x362, 0x3ad, 0x5, 0x44, 0x59, 0x49,
- 0x21, 0x3f7, 0x3e0, 0x3e3, 0x3f3, 0x0 };
-
-void tx_fir_table_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(tx_fir_table); i++)
- iowrite32(tx_fir_table[i], ctl + AGNX_FIR_BASE + i*4);
-} /* fir_table_setup */
-
-
-static const u32
-gain_table[] = { 0x8, 0x8, 0xf, 0x13, 0x17, 0x1b, 0x1f, 0x23, 0x27, 0x2b,
- 0x2f, 0x33, 0x37, 0x3b, 0x3f, 0x43, 0x47, 0x4b, 0x4f,
- 0x53, 0x57, 0x5b, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f, 0x5f,
- 0x5f, 0x5f, 0x5f, 0x5f };
-
-void gain_table_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(gain_table); i++) {
- iowrite32(gain_table[i], ctl + AGNX_GAIN_TABLE + i*4);
- iowrite32(gain_table[i], ctl + AGNX_GAIN_TABLE + i*4 + 0x80);
- }
-} /* gain_table_init */
-
-void monitor_gain_table_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- unsigned int i;
-
- for (i = 0; i < 0x44; i += 4) {
- iowrite32(0x61, ctl + AGNX_MONGCR_BASE + i);
- iowrite32(0x61, ctl + AGNX_MONGCR_BASE + 0x200 + i);
- }
- for (i = 0x44; i < 0x64; i += 4) {
- iowrite32(0x6e, ctl + AGNX_MONGCR_BASE + i);
- iowrite32(0x6e, ctl + AGNX_MONGCR_BASE + 0x200 + i);
- }
- for (i = 0x64; i < 0x94; i += 4) {
- iowrite32(0x7a, ctl + AGNX_MONGCR_BASE + i);
- iowrite32(0x7a, ctl + AGNX_MONGCR_BASE + 0x200 + i);
- }
- for (i = 0x94; i < 0xdc; i += 4) {
- iowrite32(0x87, ctl + AGNX_MONGCR_BASE + i);
- iowrite32(0x87, ctl + AGNX_MONGCR_BASE + 0x200 + i);
- }
- for (i = 0xdc; i < 0x148; i += 4) {
- iowrite32(0x95, ctl + AGNX_MONGCR_BASE + i);
- iowrite32(0x95, ctl + AGNX_MONGCR_BASE + 0x200 + i);
- }
- for (i = 0x148; i < 0x1e8; i += 4) {
- iowrite32(0xa2, ctl + AGNX_MONGCR_BASE + i);
- iowrite32(0xa2, ctl + AGNX_MONGCR_BASE + 0x200 + i);
- }
- for (i = 0x1e8; i <= 0x1fc; i += 4) {
- iowrite32(0xb0, ctl + AGNX_MONGCR_BASE + i);
- iowrite32(0xb0, ctl + AGNX_MONGCR_BASE + 0x200 + i);
- }
-} /* monitor_gain_table_init */
-
-
-void routing_table_init(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- unsigned int type, subtype;
- u32 reg;
-
- disable_receiver(priv);
-
- for (type = 0; type < 0x3; type++) {
- for (subtype = 0; subtype < 0x10; subtype++) {
- /* 1. Set Routing table to R/W and to Return status on Read */
- reg = (type << ROUTAB_TYPE_SHIFT) |
- (subtype << ROUTAB_SUBTYPE_SHIFT);
- reg |= (1 << ROUTAB_RW_SHIFT) | (1 << ROUTAB_STATUS_SHIFT);
- if (type == ROUTAB_TYPE_DATA) {
- /* NULL goes to RFP */
- if (subtype == ROUTAB_SUBTYPE_NULL)
-/* reg |= ROUTAB_ROUTE_RFP; */
- reg |= ROUTAB_ROUTE_CPU;
- /* QOS NULL goes to CPU */
- else if (subtype == ROUTAB_SUBTYPE_QOSNULL)
- reg |= ROUTAB_ROUTE_CPU;
- /* All Data and QOS data subtypes go to Encryption */
- else if ((subtype == ROUTAB_SUBTYPE_DATA) ||
- (subtype == ROUTAB_SUBTYPE_DATAACK) ||
- (subtype == ROUTAB_SUBTYPE_DATAPOLL) ||
- (subtype == ROUTAB_SUBTYPE_DATAPOLLACK) ||
- (subtype == ROUTAB_SUBTYPE_QOSDATA) ||
- (subtype == ROUTAB_SUBTYPE_QOSDATAACK) ||
- (subtype == ROUTAB_SUBTYPE_QOSDATAPOLL) ||
- (subtype == ROUTAB_SUBTYPE_QOSDATAACKPOLL))
- reg |= ROUTAB_ROUTE_ENCRY;
-/* reg |= ROUTAB_ROUTE_CPU; */
- /*Drop NULL and QOS NULL ack, poll and poll ack*/
- else if ((subtype == ROUTAB_SUBTYPE_NULLACK) ||
- (subtype == ROUTAB_SUBTYPE_QOSNULLACK) ||
- (subtype == ROUTAB_SUBTYPE_NULLPOLL) ||
- (subtype == ROUTAB_SUBTYPE_QOSNULLPOLL) ||
- (subtype == ROUTAB_SUBTYPE_NULLPOLLACK) ||
- (subtype == ROUTAB_SUBTYPE_QOSNULLPOLLACK))
-/* reg |= ROUTAB_ROUTE_DROP; */
- reg |= ROUTAB_ROUTE_CPU;
- } else {
- reg |= (ROUTAB_ROUTE_CPU);
- }
- iowrite32(reg, ctl + AGNX_RXM_ROUTAB);
- /* Check to verify that the status bit cleared */
- routing_table_delay();
- }
- }
- enable_receiver(priv);
-} /* routing_table_init */
-
-void tx_engine_lookup_tbl_init(struct agnx_priv *priv)
-{
- void __iomem *data = priv->data;
- unsigned int i;
-
- for (i = 0; i <= 28; i += 4)
- iowrite32(0xb00c, data + AGNX_ENGINE_LOOKUP_TBL + i);
- for (i = 32; i <= 120; i += 8) {
- iowrite32(0x1e58, data + AGNX_ENGINE_LOOKUP_TBL + i);
- iowrite32(0xb00c, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
- }
-
- for (i = 128; i <= 156; i += 4)
- iowrite32(0x980c, data + AGNX_ENGINE_LOOKUP_TBL + i);
- for (i = 160; i <= 248; i += 8) {
- iowrite32(0x1858, data + AGNX_ENGINE_LOOKUP_TBL + i);
- iowrite32(0x980c, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
- }
-
- for (i = 256; i <= 284; i += 4)
- iowrite32(0x980c, data + AGNX_ENGINE_LOOKUP_TBL + i);
- for (i = 288; i <= 376; i += 8) {
- iowrite32(0x1a58, data + AGNX_ENGINE_LOOKUP_TBL + i);
- iowrite32(0x1858, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
- }
-
- for (i = 512; i <= 540; i += 4)
- iowrite32(0xc00c, data + AGNX_ENGINE_LOOKUP_TBL + i);
- for (i = 544; i <= 632; i += 8) {
- iowrite32(0x2058, data + AGNX_ENGINE_LOOKUP_TBL + i);
- iowrite32(0xc00c, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
- }
-
- for (i = 640; i <= 668; i += 4)
- iowrite32(0xc80c, data + AGNX_ENGINE_LOOKUP_TBL + i);
- for (i = 672; i <= 764; i += 8) {
- iowrite32(0x2258, data + AGNX_ENGINE_LOOKUP_TBL + i);
- iowrite32(0xc80c, data + AGNX_ENGINE_LOOKUP_TBL + i + 4);
- }
-}
-
+++ /dev/null
-#ifndef AGNX_TABLE_H_
-#define AGNX_TABLE_H_
-
-void tx_fir_table_init(struct agnx_priv *priv);
-void gain_table_init(struct agnx_priv *priv);
-void monitor_gain_table_init(struct agnx_priv *priv);
-void routing_table_init(struct agnx_priv *priv);
-void tx_engine_lookup_tbl_init(struct agnx_priv *priv);
-
-#endif /* AGNX_TABLE_H_ */
+++ /dev/null
-/**
- * Airgo MIMO wireless driver
- *
- * Copyright (c) 2007 Li YanBo <dreamfly281@gmail.com>
-
- * Thanks for Jeff Williams <angelbane@gmail.com> do reverse engineer
- * works and published the SPECS at http://airgo.wdwconsulting.net/mymoin
-
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "agnx.h"
-#include "debug.h"
-#include "phy.h"
-
-unsigned int rx_frame_cnt;
-/* unsigned int local_tx_sent_cnt = 0; */
-
-static inline void disable_rx_engine(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- iowrite32(0x100, ctl + AGNX_CIR_RXCTL);
- /* Wait for RX Control to have the Disable Rx Interrupt (0x100) set */
- ioread32(ctl + AGNX_CIR_RXCTL);
-}
-
-static inline void enable_rx_engine(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- iowrite32(0x80, ctl + AGNX_CIR_RXCTL);
- ioread32(ctl + AGNX_CIR_RXCTL);
-}
-
-inline void disable_rx_interrupt(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- disable_rx_engine(priv);
- reg = ioread32(ctl + AGNX_CIR_RXCFG);
- reg &= ~0x20;
- iowrite32(reg, ctl + AGNX_CIR_RXCFG);
- ioread32(ctl + AGNX_CIR_RXCFG);
-}
-
-inline void enable_rx_interrupt(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- reg = ioread32(ctl + AGNX_CIR_RXCFG);
- reg |= 0x20;
- iowrite32(reg, ctl + AGNX_CIR_RXCFG);
- ioread32(ctl + AGNX_CIR_RXCFG);
- enable_rx_engine(priv);
-}
-
-static inline void rx_desc_init(struct agnx_priv *priv, unsigned int idx)
-{
- struct agnx_desc *desc = priv->rx.desc + idx;
- struct agnx_info *info = priv->rx.info + idx;
-
- memset(info, 0, sizeof(*info));
-
- info->dma_len = IEEE80211_MAX_RTS_THRESHOLD + sizeof(struct agnx_hdr);
- info->skb = dev_alloc_skb(info->dma_len);
- if (info->skb == NULL)
- agnx_bug("refill err");
-
- info->mapping = pci_map_single(priv->pdev, skb_tail_pointer(info->skb),
- info->dma_len, PCI_DMA_FROMDEVICE);
- memset(desc, 0, sizeof(*desc));
- desc->dma_addr = cpu_to_be32(info->mapping);
- /* Set the owner to the card */
- desc->frag = cpu_to_be32(be32_to_cpu(desc->frag) | OWNER);
-}
-
-static inline void rx_desc_reinit(struct agnx_priv *priv, unsigned int idx)
-{
- struct agnx_info *info = priv->rx.info + idx;
-
- /* Cause ieee80211 will free the skb buffer, so we needn't to free it again?! */
- pci_unmap_single(priv->pdev, info->mapping, info->dma_len, PCI_DMA_FROMDEVICE);
- rx_desc_init(priv, idx);
-}
-
-static inline void rx_desc_reusing(struct agnx_priv *priv, unsigned int idx)
-{
- struct agnx_desc *desc = priv->rx.desc + idx;
- struct agnx_info *info = priv->rx.info + idx;
-
- memset(desc, 0, sizeof(*desc));
- desc->dma_addr = cpu_to_be32(info->mapping);
- /* Set the owner to the card */
- desc->frag = cpu_to_be32(be32_to_cpu(desc->frag) | OWNER);
-}
-
-static void rx_desc_free(struct agnx_priv *priv, unsigned int idx)
-{
- struct agnx_desc *desc = priv->rx.desc + idx;
- struct agnx_info *info = priv->rx.info + idx;
-
- BUG_ON(!desc || !info);
- if (info->mapping)
- pci_unmap_single(priv->pdev, info->mapping, info->dma_len, PCI_DMA_FROMDEVICE);
- if (info->skb)
- dev_kfree_skb(info->skb);
- memset(info, 0, sizeof(*info));
- memset(desc, 0, sizeof(*desc));
-}
-
-static inline void __tx_desc_free(struct agnx_priv *priv,
- struct agnx_desc *desc, struct agnx_info *info)
-{
- BUG_ON(!desc || !info);
- /* TODO make sure mapping, skb and len are consistency */
- if (info->mapping)
- pci_unmap_single(priv->pdev, info->mapping,
- info->dma_len, PCI_DMA_TODEVICE);
- if (info->type == PACKET)
- dev_kfree_skb(info->skb);
-
- memset(info, 0, sizeof(*info));
- memset(desc, 0, sizeof(*desc));
-}
-
-static void txm_desc_free(struct agnx_priv *priv, unsigned int idx)
-{
- struct agnx_desc *desc = priv->txm.desc + idx;
- struct agnx_info *info = priv->txm.info + idx;
-
- __tx_desc_free(priv, desc, info);
-}
-
-static void txd_desc_free(struct agnx_priv *priv, unsigned int idx)
-{
- struct agnx_desc *desc = priv->txd.desc + idx;
- struct agnx_info *info = priv->txd.info + idx;
-
- __tx_desc_free(priv, desc, info);
-}
-
-int fill_rings(struct agnx_priv *priv)
-{
- void __iomem *ctl = priv->ctl;
- unsigned int i;
- u32 reg;
- AGNX_TRACE;
-
- priv->txd.idx_sent = priv->txm.idx_sent = 0;
- priv->rx.idx = priv->txm.idx = priv->txd.idx = 0;
-
- for (i = 0; i < priv->rx.size; i++)
- rx_desc_init(priv, i);
- for (i = 0; i < priv->txm.size; i++) {
- memset(priv->txm.desc + i, 0, sizeof(struct agnx_desc));
- memset(priv->txm.info + i, 0, sizeof(struct agnx_info));
- }
- for (i = 0; i < priv->txd.size; i++) {
- memset(priv->txd.desc + i, 0, sizeof(struct agnx_desc));
- memset(priv->txd.info + i, 0, sizeof(struct agnx_info));
- }
-
- /* FIXME Set the card RX TXM and TXD address */
- agnx_write32(ctl, AGNX_CIR_RXCMSTART, priv->rx.dma);
- agnx_write32(ctl, AGNX_CIR_RXCMEND, priv->txm.dma);
-
- agnx_write32(ctl, AGNX_CIR_TXMSTART, priv->txm.dma);
- agnx_write32(ctl, AGNX_CIR_TXMEND, priv->txd.dma);
-
- agnx_write32(ctl, AGNX_CIR_TXDSTART, priv->txd.dma);
- agnx_write32(ctl, AGNX_CIR_TXDEND, priv->txd.dma +
- sizeof(struct agnx_desc) * priv->txd.size);
-
- /* FIXME Relinquish control of rings to card */
- reg = agnx_read32(ctl, AGNX_CIR_BLKCTL);
- reg &= ~0x800;
- agnx_write32(ctl, AGNX_CIR_BLKCTL, reg);
- return 0;
-} /* fill_rings */
-
-void unfill_rings(struct agnx_priv *priv)
-{
- unsigned long flags;
- unsigned int i;
- AGNX_TRACE;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- for (i = 0; i < priv->rx.size; i++)
- rx_desc_free(priv, i);
- for (i = 0; i < priv->txm.size; i++)
- txm_desc_free(priv, i);
- for (i = 0; i < priv->txd.size; i++)
- txd_desc_free(priv, i);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-/* Extract the bitrate out of a CCK PLCP header.
- copy from bcm43xx driver */
-static inline u8 agnx_plcp_get_bitrate_cck(__be32 *phyhdr_11b)
-{
- /* FIXME */
- switch (*(u8 *)phyhdr_11b) {
- case 0x0A:
- return 0;
- case 0x14:
- return 1;
- case 0x37:
- return 2;
- case 0x6E:
- return 3;
- }
- agnx_bug("Wrong plcp rate");
- return 0;
-}
-
-/* FIXME */
-static inline u8 agnx_plcp_get_bitrate_ofdm(__be32 *phyhdr_11g)
-{
- u8 rate = *(u8 *)phyhdr_11g & 0xF;
-
- printk(PFX "G mode rate is 0x%x\n", rate);
- return rate;
-}
-
-/* FIXME */
-static void get_rx_stats(struct agnx_priv *priv, struct agnx_hdr *hdr,
- struct ieee80211_rx_status *stat)
-{
- void __iomem *ctl = priv->ctl;
- u8 *rssi;
- u32 noise;
- /* FIXME just for test */
- int snr = 40; /* signal-to-noise ratio */
-
- memset(stat, 0, sizeof(*stat));
- /* RSSI */
- rssi = (u8 *)&hdr->phy_stats_lo;
-/* stat->ssi = (rssi[0] + rssi[1] + rssi[2]) / 3; */
- /* Noise */
- noise = ioread32(ctl + AGNX_GCR_NOISE0);
- noise += ioread32(ctl + AGNX_GCR_NOISE1);
- noise += ioread32(ctl + AGNX_GCR_NOISE2);
- stat->noise = noise / 3;
- /* Signal quality */
-/* snr = stat->ssi - stat->noise; */
- if (snr >= 0 && snr < 40)
- stat->signal = 5 * snr / 2;
- else if (snr >= 40)
- stat->signal = 100;
- else
- stat->signal = 0;
-
-
- if (hdr->_11b0 && !hdr->_11g0) {
- stat->rate_idx = agnx_plcp_get_bitrate_cck(&hdr->_11b0);
- } else if (!hdr->_11b0 && hdr->_11g0) {
- printk(PFX "RX: Found G mode packet\n");
- stat->rate_idx = agnx_plcp_get_bitrate_ofdm(&hdr->_11g0);
- } else
- agnx_bug("Unknown packets type");
-
-
- stat->band = IEEE80211_BAND_2GHZ;
- stat->freq = agnx_channels[priv->channel - 1].center_freq;
-/* stat->antenna = 3;
- stat->mactime = be32_to_cpu(hdr->time_stamp);
- stat->channel = priv->channel; */
-}
-
-static inline void combine_hdr_frag(struct ieee80211_hdr *ieeehdr,
- struct sk_buff *skb)
-{
- u16 fctl;
- unsigned int hdrlen;
-
- fctl = le16_to_cpu(ieeehdr->frame_control);
- hdrlen = ieee80211_hdrlen(fctl);
- /* FIXME */
- if (hdrlen < (2+2+6)/*minimum hdr*/ ||
- hdrlen > sizeof(struct ieee80211_mgmt)) {
- printk(KERN_ERR PFX "hdr len is %d\n", hdrlen);
- agnx_bug("Wrong ieee80211 hdr detected");
- }
- skb_push(skb, hdrlen);
- memcpy(skb->data, ieeehdr, hdrlen);
-} /* combine_hdr_frag */
-
-static inline int agnx_packet_check(struct agnx_priv *priv, struct agnx_hdr *agnxhdr,
- unsigned packet_len)
-{
- if (agnx_get_bits(CRC_FAIL, CRC_FAIL_SHIFT, be32_to_cpu(agnxhdr->reg1)) == 1) {
- printk(PFX "RX: CRC check fail\n");
- goto drop;
- }
- if (packet_len > 2048) {
- printk(PFX "RX: Too long packet detected\n");
- goto drop;
- }
-
- /* FIXME Just usable for Promious Mode, for Manage mode exclude FCS */
-/* if (packet_len - sizeof(*agnxhdr) < FCS_LEN) { */
-/* printk(PFX "RX: Too short packet detected\n"); */
-/* goto drop; */
-/* } */
- return 0;
-drop:
- priv->stats.dot11FCSErrorCount++;
- return -1;
-}
-
-void handle_rx_irq(struct agnx_priv *priv)
-{
- struct ieee80211_rx_status status;
- unsigned int len;
-/* AGNX_TRACE; */
-
- do {
- struct agnx_desc *desc;
- u32 frag;
- struct agnx_info *info;
- struct agnx_hdr *hdr;
- struct sk_buff *skb;
- unsigned int i = priv->rx.idx % priv->rx.size;
-
- desc = priv->rx.desc + i;
- frag = be32_to_cpu(desc->frag);
- if (frag & OWNER)
- break;
-
- info = priv->rx.info + i;
- skb = info->skb;
- hdr = (struct agnx_hdr *)(skb->data);
-
- len = (frag & PACKET_LEN) >> PACKET_LEN_SHIFT;
- if (agnx_packet_check(priv, hdr, len) == -1) {
- rx_desc_reusing(priv, i);
- continue;
- }
- skb_put(skb, len);
-
- do {
- u16 fctl;
- fctl = le16_to_cpu(((struct ieee80211_hdr *)hdr->mac_hdr)->frame_control);
- if ((fctl & IEEE80211_FCTL_STYPE) != IEEE80211_STYPE_BEACON)/* && !(fctl & IEEE80211_STYPE_BEACON)) */
- dump_ieee80211_hdr((struct ieee80211_hdr *)hdr->mac_hdr, "RX");
- } while (0);
-
- if (hdr->_11b0 && !hdr->_11g0) {
-/* int j;
- u16 fctl = le16_to_cpu(((struct ieee80211_hdr *)hdr->mac_hdr)
- ->frame_control);
- if ( (fctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) {
- agnx_print_rx_hdr(hdr);
- agnx_print_sta(priv, BSSID_STAID);
- for (j = 0; j < 8; j++)
- agnx_print_sta_tx_wq(priv, BSSID_STAID, j);
- } */
-
- get_rx_stats(priv, hdr, &status);
- skb_pull(skb, sizeof(*hdr));
- combine_hdr_frag((struct ieee80211_hdr *)hdr->mac_hdr, skb);
- } else if (!hdr->_11b0 && hdr->_11g0) {
-/* int j; */
- agnx_print_rx_hdr(hdr);
- agnx_print_sta(priv, BSSID_STAID);
-/* for (j = 0; j < 8; j++) */
- agnx_print_sta_tx_wq(priv, BSSID_STAID, 0);
-
- print_hex_dump_bytes("agnx: RX_PACKET: ", DUMP_PREFIX_NONE,
- skb->data, skb->len + 8);
-
-/* if (agnx_plcp_get_bitrate_ofdm(&hdr->_11g0) == 0) */
- get_rx_stats(priv, hdr, &status);
- skb_pull(skb, sizeof(*hdr));
- combine_hdr_frag((struct ieee80211_hdr *)
- ((void *)&hdr->mac_hdr), skb);
-/* dump_ieee80211_hdr((struct ieee80211_hdr *)skb->data, "RX G"); */
- } else
- agnx_bug("Unknown packets type");
- memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
- ieee80211_rx_irqsafe(priv->hw, skb);
- rx_desc_reinit(priv, i);
-
- } while (priv->rx.idx++);
-} /* handle_rx_irq */
-
-static inline void handle_tx_irq(struct agnx_priv *priv, struct agnx_ring *ring)
-{
- struct agnx_desc *desc;
- struct agnx_info *info;
- unsigned int idx;
-
- for (idx = ring->idx_sent; idx < ring->idx; idx++) {
- unsigned int i = idx % ring->size;
- u32 frag;
-
- desc = ring->desc + i;
- info = ring->info + i;
-
- frag = be32_to_cpu(desc->frag);
- if (frag & OWNER) {
- if (info->type == HEADER)
- break;
- else
- agnx_bug("TX error");
- }
-
- pci_unmap_single(priv->pdev, info->mapping, info->dma_len, PCI_DMA_TODEVICE);
-
- do {
-/* int j; */
- size_t len;
- len = info->skb->len - sizeof(struct agnx_hdr) + info->hdr_len;
-/* if (len == 614) { */
-/* agnx_print_desc(desc); */
- if (info->type == PACKET) {
-/* agnx_print_tx_hdr((struct agnx_hdr *)info->skb->data); */
-/* agnx_print_sta_power(priv, LOCAL_STAID); */
-/* agnx_print_sta(priv, LOCAL_STAID); */
-/* for (j = 0; j < 8; j++) */
-/* agnx_print_sta_tx_wq(priv, LOCAL_STAID, 0); */
-/* agnx_print_sta_power(priv, BSSID_STAID); */
-/* agnx_print_sta(priv, BSSID_STAID); */
-/* for (j = 0; j < 8; j++) */
-/* agnx_print_sta_tx_wq(priv, BSSID_STAID, 0); */
- }
-/* } */
- } while (0);
-
- if (info->type == PACKET) {
-/* dump_txm_registers(priv);
- dump_rxm_registers(priv);
- dump_bm_registers(priv);
- dump_cir_registers(priv); */
- }
-
- if (info->type == PACKET) {
-/* struct ieee80211_hdr *hdr; */
- struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(info->skb);
-
- skb_pull(info->skb, sizeof(struct agnx_hdr));
- memcpy(skb_push(info->skb, info->hdr_len), &info->hdr, info->hdr_len);
-
-/* dump_ieee80211_hdr((struct ieee80211_hdr *)info->skb->data, "TX_HANDLE"); */
-/* print_hex_dump_bytes("agnx: TX_HANDLE: ", DUMP_PREFIX_NONE, */
-/* info->skb->data, info->skb->len); */
-
- if (!(txi->flags & IEEE80211_TX_CTL_NO_ACK))
- txi->flags |= IEEE80211_TX_STAT_ACK;
-
- ieee80211_tx_status_irqsafe(priv->hw, info->skb);
-
-
-/* info->tx_status.queue_number = (ring->size - i) / 2; */
-/* ieee80211_tx_status_irqsafe(priv->hw, info->skb, &(info->tx_status)); */
-/* } else */
-/* dev_kfree_skb_irq(info->skb); */
- }
- memset(desc, 0, sizeof(*desc));
- memset(info, 0, sizeof(*info));
- }
-
- ring->idx_sent = idx;
- /* TODO fill the priv->low_level_stats */
-
- /* ieee80211_wake_queue(priv->hw, 0); */
-}
-
-void handle_txm_irq(struct agnx_priv *priv)
-{
- handle_tx_irq(priv, &priv->txm);
-}
-
-void handle_txd_irq(struct agnx_priv *priv)
-{
- handle_tx_irq(priv, &priv->txd);
-}
-
-void handle_other_irq(struct agnx_priv *priv)
-{
-/* void __iomem *ctl = priv->ctl; */
- u32 status = priv->irq_status;
- void __iomem *ctl = priv->ctl;
- u32 reg;
-
- if (status & IRQ_TX_BEACON) {
- iowrite32(IRQ_TX_BEACON, ctl + AGNX_INT_STAT);
- printk(PFX "IRQ: TX Beacon control is 0X%.8X\n", ioread32(ctl + AGNX_TXM_BEACON_CTL));
- printk(PFX "IRQ: TX Beacon rx frame num: %d\n", rx_frame_cnt);
- }
- if (status & IRQ_TX_RETRY) {
- reg = ioread32(ctl + AGNX_TXM_RETRYSTAID);
- printk(PFX "IRQ: TX Retry, RETRY STA ID is %x\n", reg);
- }
- if (status & IRQ_TX_ACTIVITY)
- printk(PFX "IRQ: TX Activity\n");
- if (status & IRQ_RX_ACTIVITY)
- printk(PFX "IRQ: RX Activity\n");
- if (status & IRQ_RX_X)
- printk(PFX "IRQ: RX X\n");
- if (status & IRQ_RX_Y) {
- reg = ioread32(ctl + AGNX_INT_MASK);
- reg &= ~IRQ_RX_Y;
- iowrite32(reg, ctl + AGNX_INT_MASK);
- iowrite32(IRQ_RX_Y, ctl + AGNX_INT_STAT);
- printk(PFX "IRQ: RX Y\n");
- }
- if (status & IRQ_RX_HASHHIT) {
- reg = ioread32(ctl + AGNX_INT_MASK);
- reg &= ~IRQ_RX_HASHHIT;
- iowrite32(reg, ctl + AGNX_INT_MASK);
- iowrite32(IRQ_RX_HASHHIT, ctl + AGNX_INT_STAT);
- printk(PFX "IRQ: RX Hash Hit\n");
-
- }
- if (status & IRQ_RX_FRAME) {
- reg = ioread32(ctl + AGNX_INT_MASK);
- reg &= ~IRQ_RX_FRAME;
- iowrite32(reg, ctl + AGNX_INT_MASK);
- iowrite32(IRQ_RX_FRAME, ctl + AGNX_INT_STAT);
- printk(PFX "IRQ: RX Frame\n");
- rx_frame_cnt++;
- }
- if (status & IRQ_ERR_INT) {
- iowrite32(IRQ_ERR_INT, ctl + AGNX_INT_STAT);
-/* agnx_hw_reset(priv); */
- printk(PFX "IRQ: Error Interrupt\n");
- }
- if (status & IRQ_TX_QUE_FULL)
- printk(PFX "IRQ: TX Workqueue Full\n");
- if (status & IRQ_BANDMAN_ERR)
- printk(PFX "IRQ: Bandwidth Management Error\n");
- if (status & IRQ_TX_DISABLE)
- printk(PFX "IRQ: TX Disable\n");
- if (status & IRQ_RX_IVASESKEY)
- printk(PFX "IRQ: RX Invalid Session Key\n");
- if (status & IRQ_REP_THHIT)
- printk(PFX "IRQ: Replay Threshold Hit\n");
- if (status & IRQ_TIMER1)
- printk(PFX "IRQ: Timer1\n");
- if (status & IRQ_TIMER_CNT)
- printk(PFX "IRQ: Timer Count\n");
- if (status & IRQ_PHY_FASTINT)
- printk(PFX "IRQ: Phy Fast Interrupt\n");
- if (status & IRQ_PHY_SLOWINT)
- printk(PFX "IRQ: Phy Slow Interrupt\n");
- if (status & IRQ_OTHER)
- printk(PFX "IRQ: 0x80000000\n");
-} /* handle_other_irq */
-
-
-static inline void route_flag_set(struct agnx_hdr *txhdr)
-{
-/* u32 reg = 0; */
-
- /* FIXME */
-/* reg = (0x7 << ROUTE_COMPRESSION_SHIFT) & ROUTE_COMPRESSION; */
-/* txhdr->reg5 = cpu_to_be32(reg); */
- txhdr->reg5 = (0xa << 0x0) | (0x7 << 0x18);
-/* txhdr->reg5 = cpu_to_be32((0xa << 0x0) | (0x7 << 0x18)); */
-/* txhdr->reg5 = cpu_to_be32(0x7 << 0x0); */
-}
-
-/* Return 0 if no match */
-static inline unsigned int get_power_level(unsigned int rate, unsigned int antennas_num)
-{
- unsigned int power_level;
-
- switch (rate) {
- case 10:
- case 20:
- case 55:
- case 60:
- case 90:
- case 120:
- power_level = 22;
- break;
-
- case 180:
- power_level = 19;
- break;
-
- case 240:
- power_level = 18;
- break;
-
- case 360:
- power_level = 16;
- break;
-
- case 480:
- power_level = 15;
- break;
-
- case 540:
- power_level = 14;
- break;
- default:
- agnx_bug("Error rate setting\n");
- }
-
- if (power_level && (antennas_num == 2))
- power_level -= 3;
-
- return power_level;
-}
-
-static inline void fill_agnx_hdr(struct agnx_priv *priv, struct agnx_info *tx_info)
-{
- struct agnx_hdr *txhdr = (struct agnx_hdr *)tx_info->skb->data;
- size_t len;
- u16 fc = le16_to_cpu(*(__le16 *)&tx_info->hdr);
- u32 reg;
-
- memset(txhdr, 0, sizeof(*txhdr));
-
-/* reg = agnx_set_bits(STATION_ID, STATION_ID_SHIFT, LOCAL_STAID); */
- reg = agnx_set_bits(STATION_ID, STATION_ID_SHIFT, BSSID_STAID);
- reg |= agnx_set_bits(WORKQUEUE_ID, WORKQUEUE_ID_SHIFT, 0);
- txhdr->reg4 = cpu_to_be32(reg);
-
- /* Set the Hardware Sequence Number to 1? */
- reg = agnx_set_bits(SEQUENCE_NUMBER, SEQUENCE_NUMBER_SHIFT, 0);
-/* reg = agnx_set_bits(SEQUENCE_NUMBER, SEQUENCE_NUMBER_SHIFT, 1); */
- reg |= agnx_set_bits(MAC_HDR_LEN, MAC_HDR_LEN_SHIFT, tx_info->hdr_len);
- txhdr->reg1 = cpu_to_be32(reg);
- /* Set the agnx_hdr's MAC header */
- memcpy(txhdr->mac_hdr, &tx_info->hdr, tx_info->hdr_len);
-
- reg = agnx_set_bits(ACK, ACK_SHIFT, 1);
-/* reg = agnx_set_bits(ACK, ACK_SHIFT, 0); */
- reg |= agnx_set_bits(MULTICAST, MULTICAST_SHIFT, 0);
-/* reg |= agnx_set_bits(MULTICAST, MULTICAST_SHIFT, 1); */
- reg |= agnx_set_bits(RELAY, RELAY_SHIFT, 0);
- reg |= agnx_set_bits(TM, TM_SHIFT, 0);
- txhdr->reg0 = cpu_to_be32(reg);
-
- /* Set the long and short retry limits */
- txhdr->tx.short_retry_limit = tx_info->txi->control.rates[0].count;
- txhdr->tx.long_retry_limit = tx_info->txi->control.rates[0].count;
-
- /* FIXME */
- len = tx_info->skb->len - sizeof(*txhdr) + tx_info->hdr_len + FCS_LEN;
- if (fc & IEEE80211_FCTL_PROTECTED)
- len += 8;
- len = 2398;
- reg = agnx_set_bits(FRAG_SIZE, FRAG_SIZE_SHIFT, len);
- len = tx_info->skb->len - sizeof(*txhdr);
- reg |= agnx_set_bits(PAYLOAD_LEN, PAYLOAD_LEN_SHIFT, len);
- txhdr->reg3 = cpu_to_be32(reg);
-
- route_flag_set(txhdr);
-} /* fill_hdr */
-
-static void txm_power_set(struct agnx_priv *priv,
- struct ieee80211_tx_info *txi)
-{
- struct agnx_sta_power power;
- u32 reg;
-
- /* FIXME */
- if (txi->control.rates[0].idx < 0) {
- /* For B mode Short Preamble */
- reg = agnx_set_bits(PHY_MODE, PHY_MODE_SHIFT, AGNX_MODE_80211B_SHORT);
-/* control->tx_rate = -control->tx_rate; */
- } else
- reg = agnx_set_bits(PHY_MODE, PHY_MODE_SHIFT, AGNX_MODE_80211G);
-/* reg = agnx_set_bits(PHY_MODE, PHY_MODE_SHIFT, AGNX_MODE_80211B_LONG); */
- reg |= agnx_set_bits(SIGNAL, SIGNAL_SHIFT, 0xB);
- reg |= agnx_set_bits(RATE, RATE_SHIFT, 0xB);
-/* reg |= agnx_set_bits(POWER_LEVEL, POWER_LEVEL_SHIFT, 15); */
- reg |= agnx_set_bits(POWER_LEVEL, POWER_LEVEL_SHIFT, 20);
- /* if rate < 11M set it to 0 */
- reg |= agnx_set_bits(NUM_TRANSMITTERS, NUM_TRANSMITTERS_SHIFT, 1);
-/* reg |= agnx_set_bits(EDCF, EDCF_SHIFT, 1); */
-/* reg |= agnx_set_bits(TIFS, TIFS_SHIFT, 1); */
-
- power.reg = reg;
-/* power.reg = cpu_to_le32(reg); */
-
-/* set_sta_power(priv, &power, LOCAL_STAID); */
- set_sta_power(priv, &power, BSSID_STAID);
-}
-
-static inline int tx_packet_check(struct sk_buff *skb)
-{
- unsigned int ieee_len = ieee80211_get_hdrlen_from_skb(skb);
- if (skb->len > 2048) {
- printk(KERN_ERR PFX "length is %d\n", skb->len);
- agnx_bug("Too long TX skb");
- return -1;
- }
- /* FIXME */
- if (skb->len == ieee_len) {
- printk(PFX "A strange TX packet\n");
- return -1;
- /* tx_faile_irqsafe(); */
- }
- return 0;
-}
-
-static int __agnx_tx(struct agnx_priv *priv, struct sk_buff *skb,
- struct agnx_ring *ring)
-{
- struct agnx_desc *hdr_desc, *frag_desc;
- struct agnx_info *hdr_info, *frag_info;
- struct ieee80211_tx_info *txi = IEEE80211_SKB_CB(skb);
- unsigned long flags;
- unsigned int i;
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* The RX interrupt need be Disable until this TX packet
- is handled in the next tx interrupt */
- disable_rx_interrupt(priv);
-
- i = ring->idx;
- ring->idx += 2;
-/* if (priv->txm_idx - priv->txm_idx_sent == AGNX_TXM_RING_SIZE - 2) */
-/* ieee80211_stop_queue(priv->hw, 0); */
-
- /* Set agnx header's info and desc */
- i %= ring->size;
- hdr_desc = ring->desc + i;
- hdr_info = ring->info + i;
- hdr_info->hdr_len = ieee80211_get_hdrlen_from_skb(skb);
- memcpy(&hdr_info->hdr, skb->data, hdr_info->hdr_len);
-
- /* Add the agnx header to the front of the SKB */
- skb_push(skb, sizeof(struct agnx_hdr) - hdr_info->hdr_len);
-
- hdr_info->txi = txi;
- hdr_info->dma_len = sizeof(struct agnx_hdr);
- hdr_info->skb = skb;
- hdr_info->type = HEADER;
- fill_agnx_hdr(priv, hdr_info);
- hdr_info->mapping = pci_map_single(priv->pdev, skb->data,
- hdr_info->dma_len, PCI_DMA_TODEVICE);
- do {
- u32 frag = 0;
- frag |= agnx_set_bits(FIRST_FRAG, FIRST_FRAG_SHIFT, 1);
- frag |= agnx_set_bits(LAST_FRAG, LAST_FRAG_SHIFT, 0);
- frag |= agnx_set_bits(PACKET_LEN, PACKET_LEN_SHIFT, skb->len);
- frag |= agnx_set_bits(FIRST_FRAG_LEN, FIRST_FRAG_LEN_SHIFT, 1);
- frag |= agnx_set_bits(OWNER, OWNER_SHIFT, 1);
- hdr_desc->frag = cpu_to_be32(frag);
- } while (0);
- hdr_desc->dma_addr = cpu_to_be32(hdr_info->mapping);
-
-
- /* Set Frag's info and desc */
- i = (i + 1) % ring->size;
- frag_desc = ring->desc + i;
- frag_info = ring->info + i;
- memcpy(frag_info, hdr_info, sizeof(struct agnx_info));
- frag_info->type = PACKET;
- frag_info->dma_len = skb->len - hdr_info->dma_len;
- frag_info->mapping = pci_map_single(priv->pdev, skb->data + hdr_info->dma_len,
- frag_info->dma_len, PCI_DMA_TODEVICE);
- do {
- u32 frag = 0;
- frag |= agnx_set_bits(FIRST_FRAG, FIRST_FRAG_SHIFT, 0);
- frag |= agnx_set_bits(LAST_FRAG, LAST_FRAG_SHIFT, 1);
- frag |= agnx_set_bits(PACKET_LEN, PACKET_LEN_SHIFT, skb->len);
- frag |= agnx_set_bits(SUB_FRAG_LEN, SUB_FRAG_LEN_SHIFT, frag_info->dma_len);
- frag_desc->frag = cpu_to_be32(frag);
- } while (0);
- frag_desc->dma_addr = cpu_to_be32(frag_info->mapping);
-
- txm_power_set(priv, txi);
-
-/* do { */
-/* int j; */
-/* size_t len; */
-/* len = skb->len - hdr_info->dma_len + hdr_info->hdr_len; */
-/* if (len == 614) { */
-/* agnx_print_desc(hdr_desc); */
-/* agnx_print_desc(frag_desc); */
-/* agnx_print_tx_hdr((struct agnx_hdr *)skb->data); */
-/* agnx_print_sta_power(priv, LOCAL_STAID); */
-/* agnx_print_sta(priv, LOCAL_STAID); */
-/* for (j = 0; j < 8; j++) */
-/* agnx_print_sta_tx_wq(priv, LOCAL_STAID, j); */
-/* agnx_print_sta_power(priv, BSSID_STAID); */
-/* agnx_print_sta(priv, BSSID_STAID); */
-/* for (j = 0; j < 8; j++) */
-/* agnx_print_sta_tx_wq(priv, BSSID_STAID, j); */
-/* } */
-/* } while (0); */
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* FIXME ugly code */
- /* Trigger TXM */
- do {
- u32 reg;
- reg = (ioread32(priv->ctl + AGNX_CIR_TXMCTL));
- reg |= 0x8;
- iowrite32((reg), priv->ctl + AGNX_CIR_TXMCTL);
- } while (0);
-
- /* Trigger TXD */
- do {
- u32 reg;
- reg = (ioread32(priv->ctl + AGNX_CIR_TXDCTL));
- reg |= 0x8;
- iowrite32((reg), priv->ctl + AGNX_CIR_TXDCTL);
- } while (0);
-
- return 0;
-}
-
-int _agnx_tx(struct agnx_priv *priv, struct sk_buff *skb)
-{
- u16 fctl;
-
- if (tx_packet_check(skb))
- return 0;
-
-/* print_hex_dump_bytes("agnx: TX_PACKET: ", DUMP_PREFIX_NONE, */
-/* skb->data, skb->len); */
-
- fctl = le16_to_cpu(*((__le16 *)skb->data));
-
- if ((fctl & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA)
- return __agnx_tx(priv, skb, &priv->txd);
- else
- return __agnx_tx(priv, skb, &priv->txm);
-}
+++ /dev/null
-#ifndef AGNX_XMIT_H_
-#define AGNX_XMIT_H_
-
-#include <net/mac80211.h>
-
-struct agnx_priv;
-
-static inline u32 agnx_set_bits(u32 mask, u8 shift, u32 value)
-{
- return (value << shift) & mask;
-}
-
-static inline u32 agnx_get_bits(u32 mask, u8 shift, u32 value)
-{
- return (value & mask) >> shift;
-}
-
-
-struct agnx_rx {
- __be16 rx_packet_duration; /* RX Packet Duration */
- __be16 replay_cnt; /* Replay Count */
-} __attribute__((__packed__));
-
-
-struct agnx_tx {
- u8 long_retry_limit; /* Long Retry Limit */
- u8 short_retry_limit; /* Short Retry Limit */
- u8 long_retry_cnt; /* Long Retry Count */
- u8 short_retry_cnt; /* Short Retry Count */
-} __attribute__((__packed__));
-
-
-/* Copy from bcm43xx */
-#define P4D_BYT3S(magic, nr_bytes) u8 __p4dding##magic[nr_bytes]
-#define P4D_BYTES(line, nr_bytes) P4D_BYT3S(line, nr_bytes)
-#define PAD_BYTES(nr_bytes) P4D_BYTES(__LINE__, nr_bytes)
-
-#define P4D_BIT3S(magic, nr_bits) __be32 __padding##magic:nr_bits
-#define P4D_BITS(line, nr_bits) P4D_BIT3S(line, nr_bits)
-#define PAD_BITS(nr_bits) P4D_BITS(__LINE__, nr_bits)
-
-
-struct agnx_hdr {
- __be32 reg0;
-#define RTS 0x80000000 /* RTS */
-#define RTS_SHIFT 31
-#define MULTICAST 0x40000000 /* multicast */
-#define MULTICAST_SHIFT 30
-#define ACK 0x30000000 /* ACK */
-#define ACK_SHIFT 28
-#define TM 0x08000000 /* TM */
-#define TM_SHIFT 27
-#define RELAY 0x04000000 /* Relay */
-#define RELAY_SHIFT 26
-/* PAD_BITS(4); */
-#define REVISED_FCS 0x00380000 /* revised FCS */
-#define REVISED_FCS_SHIFT 19
-#define NEXT_BUFFER_ADDR 0x0007FFFF /* Next Buffer Address */
-#define NEXT_BUFFER_ADDR_SHIFT 0
-
- __be32 reg1;
-#define MAC_HDR_LEN 0xFC000000 /* MAC Header Length */
-#define MAC_HDR_LEN_SHIFT 26
-#define DURATION_OVERIDE 0x02000000 /* Duration Override */
-#define DURATION_OVERIDE_SHIFT 25
-#define PHY_HDR_OVERIDE 0x01000000 /* PHY Header Override */
-#define PHY_HDR_OVERIDE_SHIFT 24
-#define CRC_FAIL 0x00800000 /* CRC fail */
-#define CRC_FAIL_SHIFT 23
-/* PAD_BITS(1); */
-#define SEQUENCE_NUMBER 0x00200000 /* Sequence Number */
-#define SEQUENCE_NUMBER_SHIFT 21
-/* PAD_BITS(2); */
-#define BUFF_HEAD_ADDR 0x0007FFFF /* Buffer Head Address */
-#define BUFF_HEAD_ADDR_SHIFT 0
-
- __be32 reg2;
-#define PDU_COUNT 0xFC000000 /* PDU Count */
-#define PDU_COUNT_SHIFT 26
-/* PAD_BITS(3); */
-#define WEP_KEY 0x00600000 /* WEP Key # */
-#define WEP_KEY_SHIFT 21
-#define USES_WEP_KEY 0x00100000 /* Uses WEP Key */
-#define USES_WEP_KEY_SHIFT 20
-#define KEEP_ALIVE 0x00080000 /* Keep alive */
-#define KEEP_ALIVE_SHIFT 19
-#define BUFF_TAIL_ADDR 0x0007FFFF /* Buffer Tail Address */
-#define BUFF_TAIL_ADDR_SHIFT 0
-
- __be32 reg3;
-#define CTS_11G 0x80000000 /* CTS in 11g */
-#define CTS_11G_SHIFT 31
-#define RTS_11G 0x40000000 /* RTS in 11g */
-#define RTS_11G_SHIFT 30
-/* PAD_BITS(2); */
-#define FRAG_SIZE 0x0FFF0000 /* fragment size */
-#define FRAG_SIZE_SHIFT 16
-#define PAYLOAD_LEN 0x0000FFF0 /* payload length */
-#define PAYLOAD_LEN_SHIFT 4
-#define FRAG_NUM 0x0000000F /* number of frags */
-#define FRAG_NUM_SHIFT 0
-
- __be32 reg4;
-/* PAD_BITS(4); */
-#define RELAY_STAID 0x0FFF0000 /* relayStald */
-#define RELAY_STAID_SHIFT 16
-#define STATION_ID 0x0000FFF0 /* Station ID */
-#define STATION_ID_SHIFT 4
-#define WORKQUEUE_ID 0x0000000F /* Workqueue ID */
-#define WORKQUEUE_ID_SHIFT 0
-
- /* FIXME this register maybe is LE? */
- __be32 reg5;
-/* PAD_BITS(4); */
-#define ROUTE_HOST 0x0F000000
-#define ROUTE_HOST_SHIFT 24
-#define ROUTE_CARD_CPU 0x00F00000
-#define ROUTE_CARD_CPU_SHIFT 20
-#define ROUTE_ENCRYPTION 0x000F0000
-#define ROUTE_ENCRYPTION_SHIFT 16
-#define ROUTE_TX 0x0000F000
-#define ROUTE_TX_SHIFT 12
-#define ROUTE_RX1 0x00000F00
-#define ROUTE_RX1_SHIFT 8
-#define ROUTE_RX2 0x000000F0
-#define ROUTE_RX2_SHIFT 4
-#define ROUTE_COMPRESSION 0x0000000F
-#define ROUTE_COMPRESSION_SHIFT 0
-
- __be32 _11g0; /* 11g */
- __be32 _11g1; /* 11g */
- __be32 _11b0; /* 11b */
- __be32 _11b1; /* 11b */
- u8 mac_hdr[32]; /* MAC header */
-
- __be16 rts_duration; /* RTS duration */
- __be16 last_duration; /* Last duration */
- __be16 sec_last_duration; /* Second to Last duration */
- __be16 other_duration; /* Other duration */
- __be16 tx_last_duration; /* TX Last duration */
- __be16 tx_other_duration; /* TX Other Duration */
- __be16 last_11g_len; /* Length of last 11g */
- __be16 other_11g_len; /* Lenght of other 11g */
-
- __be16 last_11b_len; /* Length of last 11b */
- __be16 other_11b_len; /* Lenght of other 11b */
-
-
- __be16 reg6;
-#define MBF 0xF000 /* mbf */
-#define MBF_SHIFT 12
-#define RSVD4 0x0FFF /* rsvd4 */
-#define RSVD4_SHIFT 0
-
- __be16 rx_frag_stat; /* RX fragmentation status */
-
- __be32 time_stamp; /* TimeStamp */
- __be32 phy_stats_hi; /* PHY stats hi */
- __be32 phy_stats_lo; /* PHY stats lo */
- __be32 mic_key0; /* MIC key 0 */
- __be32 mic_key1; /* MIC key 1 */
-
- union { /* RX/TX Union */
- struct agnx_rx rx;
- struct agnx_tx tx;
- };
-
- u8 rx_channel; /* Recieve Channel */
- PAD_BYTES(3);
-
- u8 reserved[4];
-} __attribute__((__packed__));
-
-
-struct agnx_desc {
-#define PACKET_LEN 0xFFF00000
-#define PACKET_LEN_SHIFT 20
-/* ------------------------------------------------ */
-#define FIRST_PACKET_MASK 0x00080000
-#define FIRST_PACKET_MASK_SHIFT 19
-#define FIRST_RESERV2 0x00040000
-#define FIRST_RESERV2_SHIFT 18
-#define FIRST_TKIP_ERROR 0x00020000
-#define FIRST_TKIP_ERROR_SHIFT 17
-#define FIRST_TKIP_PACKET 0x00010000
-#define FIRST_TKIP_PACKET_SHIFT 16
-#define FIRST_RESERV1 0x0000F000
-#define FIRST_RESERV1_SHIFT 12
-#define FIRST_FRAG_LEN 0x00000FF8
-#define FIRST_FRAG_LEN_SHIFT 3
-/* ------------------------------------------------ */
-#define SUB_RESERV2 0x000c0000
-#define SUB_RESERV2_SHIFT 18
-#define SUB_TKIP_ERROR 0x00020000
-#define SUB_TKIP_ERROR_SHIFT 17
-#define SUB_TKIP_PACKET 0x00010000
-#define SUB_TKIP_PACKET_SHIFT 16
-#define SUB_RESERV1 0x00008000
-#define SUB_RESERV1_SHIFT 15
-#define SUB_FRAG_LEN 0x00007FF8
-#define SUB_FRAG_LEN_SHIFT 3
-/* ------------------------------------------------ */
-#define FIRST_FRAG 0x00000004
-#define FIRST_FRAG_SHIFT 2
-#define LAST_FRAG 0x00000002
-#define LAST_FRAG_SHIFT 1
-#define OWNER 0x00000001
-#define OWNER_SHIFT 0
- __be32 frag;
- __be32 dma_addr;
-} __attribute__((__packed__));
-
-enum {HEADER, PACKET};
-
-struct agnx_info {
- struct sk_buff *skb;
- dma_addr_t mapping;
- u32 dma_len; /* dma buffer len */
- /* Below fields only usful for tx */
- u32 hdr_len; /* ieee80211 header length */
- unsigned int type;
- struct ieee80211_tx_info *txi;
- struct ieee80211_hdr hdr;
-};
-
-
-struct agnx_ring {
- struct agnx_desc *desc;
- dma_addr_t dma;
- struct agnx_info *info;
- /* Will lead to overflow when sent packet number enough? */
- unsigned int idx;
- unsigned int idx_sent; /* only usful for txd and txm */
- unsigned int size;
-};
-
-#define AGNX_RX_RING_SIZE 128
-#define AGNX_TXD_RING_SIZE 256
-#define AGNX_TXM_RING_SIZE 128
-
-void disable_rx_interrupt(struct agnx_priv *priv);
-void enable_rx_interrupt(struct agnx_priv *priv);
-int fill_rings(struct agnx_priv *priv);
-void unfill_rings(struct agnx_priv *priv);
-void handle_rx_irq(struct agnx_priv *priv);
-void handle_txd_irq(struct agnx_priv *priv);
-void handle_txm_irq(struct agnx_priv *priv);
-void handle_other_irq(struct agnx_priv *priv);
-int _agnx_tx(struct agnx_priv *priv, struct sk_buff *skb);
-#endif /* AGNX_XMIT_H_ */
config ANDROID
bool "Android Drivers"
+ depends on BROKEN
default N
---help---
Enable support for various drivers needed on the Android platform
#include <linux/wait.h>
#include <linux/mm.h>
#include <linux/uaccess.h>
+#include <linux/sched.h>
static unsigned int b3dfg_nbuf = 2;
config COMEDI
tristate "Data acquisition support (comedi)"
default N
- depends on m
+ depends on m && (PCI || PCMCIA || PCCARD || USB)
---help---
Enable support a wide range of data acquisition devices
for Linux.
}
DPRINTK("comedi%i subd %d buffer resized to %i bytes\n",
- dev->minor, s - dev->subdevices, async->prealloc_bufsz);
+ dev->minor, (int)(s - dev->subdevices), async->prealloc_bufsz);
return 0;
}
/* Initialize the pcmcia_device structure */
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = NULL;
* Some drivers use arrays such as this, other do not.
*/
struct pcidio_board {
- const char *name; /* anme of the board */
+ const char *name; /* name of the board */
+ int dev_id;
int n_8255; /* number of 8255 chips on board */
/* indices of base address regions */
static const struct pcidio_board pcidio_boards[] = {
{
.name = "pci-dio24",
+ .dev_id = 0x0028,
.n_8255 = 1,
.pcicontroler_badrindex = 1,
.dioregs_badrindex = 2,
},
{
.name = "pci-dio24h",
+ .dev_id = 0x0014,
.n_8255 = 1,
.pcicontroler_badrindex = 1,
.dioregs_badrindex = 2,
},
{
.name = "pci-dio48h",
+ .dev_id = 0x000b,
.n_8255 = 2,
.pcicontroler_badrindex = 0,
.dioregs_badrindex = 1,
continue;
/* loop through cards supported by this driver */
for (index = 0; index < ARRAY_SIZE(pcidio_boards); index++) {
- if (pcidio_pci_table[index].device != pcidev->device)
+ if (pcidio_boards[index].dev_id != pcidev->device)
continue;
/* was a particular bus/slot requested? */
{
struct poll_delay_t result = poll_delay_min_max(1000, 2000);
struct jr3_pci_subdev_private *p = s->private;
+ int i;
if (p) {
volatile struct jr3_channel *channel = p->channel;
p->serial_no);
/* Transformation all zeros */
- transf.link[0].link_type =
- (enum link_types)0;
- transf.link[0].link_amount = 0;
- transf.link[1].link_type =
- (enum link_types)0;
- transf.link[1].link_amount = 0;
- transf.link[2].link_type =
- (enum link_types)0;
- transf.link[2].link_amount = 0;
- transf.link[3].link_type =
- (enum link_types)0;
- transf.link[3].link_amount = 0;
+ for (i = 0; i < ARRAY_SIZE(transf.link); i++) {
+ transf.link[i].link_type =
+ (enum link_types)0;
+ transf.link[i].link_amount = 0;
+ }
set_transforms(channel, transf, 0);
use_transform(channel, 0);
*/
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include "../comedidev.h"
#include "comedi_pci.h"
return -EINVAL;
base_bitfield_channel = CR_CHAN(insn->chanspec);
for (j = 0; j < max_ports_per_bitfield; ++j) {
+ const unsigned port_offset = ni_65xx_port_by_channel(base_bitfield_channel) + j;
const unsigned port =
- sprivate(s)->base_port +
- ni_65xx_port_by_channel(base_bitfield_channel) + j;
+ sprivate(s)->base_port + port_offset;
unsigned base_port_channel;
unsigned port_mask, port_data, port_read_bits;
int bitshift;
if (port >= ni_65xx_total_num_ports(board(dev)))
break;
- base_port_channel = port * ni_65xx_channels_per_port;
+ base_port_channel = port_offset * ni_65xx_channels_per_port;
port_mask = data[0];
port_data = data[1];
bitshift = base_port_channel - base_bitfield_channel;
port_read_bits =
readb(private(dev)->mite->daq_io_addr + Port_Data(port));
/* printk("read 0x%x from port %i\n", port_read_bits, port); */
+ if (s->type == COMEDI_SUBD_DO && board(dev)->invert_outputs) {
+ /* Outputs inverted, so invert value read back from
+ * DO subdevice. (Does not apply to boards with DIO
+ * subdevice.) */
+ port_read_bits ^= 0xFF;
+ }
if (bitshift > 0) {
port_read_bits <<= bitshift;
} else {
link->priv = local;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = NULL;
link->priv = local;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = NULL;
link->priv = local;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_FORCED_PULSE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_FORCED_PULSE;
link->irq.IRQInfo1 = IRQ_INFO2_VALID | IRQ_PULSE_ID;
link->irq.Handler = NULL;
/* #define DEBUG_STATUS_B */
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include "8255.h"
#include "mite.h"
#include "comedi_fc.h"
{
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
link->io.NumPorts1 = 16;
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
/* #define DEBUG_FLAGS */
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include "../comedidev.h"
#include "mite.h"
PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1, PCI-MIO-16E-4, PCI-6014, PCI-6040E,
PXI-6040E, PCI-6030E, PCI-6031E, PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E,
PCI-6024E, PCI-6025E, PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E,
- PCI-6110, PCI-6111, PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225,
+ PCI-6110, PCI-6111, PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225,
PCI-6229, PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289,
PCI-6711, PXI-6711, PCI-6713, PXI-6713,
PCI_VENDOR_ID_NATINST, 0x70f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x710d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x716c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
+ PCI_VENDOR_ID_NATINST, 0x716d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x717f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x71bc, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
PCI_VENDOR_ID_NATINST, 0x717d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {
.caldac = {caldac_none},
.has_8255 = 0,
},
+ {
+ .device_id = 0x716d,
+ .name = "pxi-6225",
+ .n_adchan = 80,
+ .adbits = 16,
+ .ai_fifo_depth = 4095,
+ .gainlkup = ai_gain_622x,
+ .ai_speed = 4000,
+ .n_aochan = 2,
+ .aobits = 16,
+ .ao_fifo_depth = 8191,
+ .ao_range_table = &range_ni_M_622x_ao,
+ .reg_type = ni_reg_622x,
+ .ao_unipolar = 0,
+ .ao_speed = 1200,
+ .num_p0_dio_channels = 32,
+ .caldac = {caldac_none},
+ .has_8255 = 0,
+ },
{
.device_id = 0x70aa,
.name = "pci-6229",
link->priv = local;
/* Interrupt setup */
- link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = daqp_interrupt;
link->irq.Instance = local;
#include "../comedidev.h"
#include <linux/ioport.h>
+#include <asm/byteorder.h>
#define S526_SIZE 64
};
struct counter_mode_register_t {
+#if defined (__LITTLE_ENDIAN_BITFIELD)
unsigned short coutSource:1;
unsigned short coutPolarity:1;
unsigned short autoLoadResetRcap:3;
unsigned short outputRegLatchCtrl:1;
unsigned short preloadRegSel:1;
unsigned short reserved:1;
+ #elif defined(__BIG_ENDIAN_BITFIELD)
+ unsigned short reserved:1;
+ unsigned short preloadRegSel:1;
+ unsigned short outputRegLatchCtrl:1;
+ unsigned short countDirCtrl:1;
+ unsigned short countDir:1;
+ unsigned short clockSource:2;
+ unsigned short ctEnableCtrl:2;
+ unsigned short hwCtEnableSource:2;
+ unsigned short autoLoadResetRcap:3;
+ unsigned short coutPolarity:1;
+ unsigned short coutSource:1;
+#else
+#error Unknown bit field order
+#endif
};
-union {
+union cmReg {
struct counter_mode_register_t reg;
unsigned short value;
-} cmReg;
+};
#define MAX_GPCT_CONFIG_DATA 6
int i, n;
/* short value; */
/* int subdev_channel = 0; */
+ union cmReg cmReg;
printk("comedi%d: s526: ", dev->minor);
if (thisboard->have_dio) {
s->type = COMEDI_SUBD_DIO;
s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
- s->n_chan = 2;
+ s->n_chan = 8;
s->maxdata = 1;
s->range_table = &range_digital;
s->insn_bits = s526_dio_insn_bits;
udelay(1000);
printk("Read back mode reg=0x%04x\n", inw(ADDR_CHAN_REG(REG_C0M, n)));
- /* Load the pre-laod register high word */
+ /* Load the pre-load register high word */
/* value = (short) (0x55); */
/* outw(value, ADDR_CHAN_REG(REG_C0H, n)); */
- /* Load the pre-laod register low word */
+ /* Load the pre-load register low word */
/* value = (short)(0xaa55); */
/* outw(value, ADDR_CHAN_REG(REG_C0L, n)); */
int subdev_channel = CR_CHAN(insn->chanspec); /* Unpack chanspec */
int i;
short value;
+ union cmReg cmReg;
/* printk("s526: GPCT_INSN_CONFIG: Configuring Channel %d\n", subdev_channel); */
#if 1
/* Set Counter Mode Register */
- cmReg.reg.coutSource = 0; /* out RCAP */
- cmReg.reg.coutPolarity = 0; /* Polarity inverted */
- cmReg.reg.autoLoadResetRcap = 0; /* Auto load disabled */
- cmReg.reg.hwCtEnableSource = 2; /* NOT RCAP */
- cmReg.reg.ctEnableCtrl = 1; /* 1: Software, >1 : Hardware */
- cmReg.reg.clockSource = 3; /* x4 */
- cmReg.reg.countDir = 0; /* up */
- cmReg.reg.countDirCtrl = 0; /* quadrature */
- cmReg.reg.outputRegLatchCtrl = 0; /* latch on read */
- cmReg.reg.preloadRegSel = 0; /* PR0 */
- cmReg.reg.reserved = 0;
+ cmReg.value = insn->data[1] & 0xFFFF;
- /* Set Counter Mode Register */
/* printk("s526: Counter Mode register=%x\n", cmReg.value); */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
cmReg.value = (short)(insn->data[1] & 0xFFFF);
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- /* Load the pre-laod register high word */
+ /* Load the pre-load register high word */
value = (short)((insn->data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- /* Load the pre-laod register low word */
+ /* Load the pre-load register low word */
value = (short)(insn->data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
cmReg.reg.preloadRegSel = 0; /* PR0 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- /* Load the pre-laod register 0 high word */
+ /* Load the pre-load register 0 high word */
value = (short)((insn->data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- /* Load the pre-laod register 0 low word */
+ /* Load the pre-load register 0 low word */
value = (short)(insn->data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
cmReg.reg.preloadRegSel = 1; /* PR1 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- /* Load the pre-laod register 1 high word */
+ /* Load the pre-load register 1 high word */
value = (short)((insn->data[3] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- /* Load the pre-laod register 1 low word */
+ /* Load the pre-load register 1 low word */
value = (short)(insn->data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
/* Write the Counter Control Register */
- if (insn->data[3] != 0) {
- value = (short)(insn->data[3] & 0xFFFF);
+ if (insn->data[4] != 0) {
+ value = (short)(insn->data[4] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
}
break;
cmReg.reg.preloadRegSel = 0; /* PR0 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- /* Load the pre-laod register 0 high word */
+ /* Load the pre-load register 0 high word */
value = (short)((insn->data[2] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- /* Load the pre-laod register 0 low word */
+ /* Load the pre-load register 0 low word */
value = (short)(insn->data[2] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
cmReg.reg.preloadRegSel = 1; /* PR1 */
outw(cmReg.value, ADDR_CHAN_REG(REG_C0M, subdev_channel));
- /* Load the pre-laod register 1 high word */
+ /* Load the pre-load register 1 high word */
value = (short)((insn->data[3] >> 16) & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0H, subdev_channel));
- /* Load the pre-laod register 1 low word */
+ /* Load the pre-load register 1 low word */
value = (short)(insn->data[3] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0L, subdev_channel));
/* Write the Counter Control Register */
- if (insn->data[3] != 0) {
- value = (short)(insn->data[3] & 0xFFFF);
+ if (insn->data[4] != 0) {
+ value = (short)(insn->data[4] & 0xFFFF);
outw(value, ADDR_CHAN_REG(REG_C0C, subdev_channel));
}
break;
{
int subdev_channel = CR_CHAN(insn->chanspec); /* Unpack chanspec */
short value;
+ union cmReg cmReg;
printk("s526: GPCT_INSN_WRITE on channel %d\n", subdev_channel);
cmReg.value = inw(ADDR_CHAN_REG(REG_C0M, subdev_channel));
(devpriv->s526_gpct_config[subdev_channel]).data[1] =
insn->data[1];
} else {
- printk("%d \t %d\n", insn->data[1], insn->data[2]);
- printk
- ("s526: INSN_WRITE: PTG: Problem with Pulse params\n");
+ printk("s526: INSN_WRITE: PTG: Problem with Pulse params -> %d %d\n",
+ insn->data[0], insn->data[1]);
return -EINVAL;
}
data[1] = inw(ADDR_REG(REG_DIO)) & 0xFF; /* low 8 bits are the data */
/* or we could just return the software copy of the output values if
* it was a purely digital output subdevice */
- /* data[1]=s->state; */
+ /* data[1]=s->state & 0xFF; */
return 2;
}
struct comedi_insn *insn, unsigned int *data)
{
int chan = CR_CHAN(insn->chanspec);
- short value;
+ int group, mask;
printk("S526 DIO insn_config\n");
- if (insn->n != 1)
- return -EINVAL;
-
- value = inw(ADDR_REG(REG_DIO));
-
/* The input or output configuration of each digital line is
* configured by a special insn_config instruction. chanspec
* contains the channel to be changed, and data[0] contains the
* value COMEDI_INPUT or COMEDI_OUTPUT. */
- if (data[0] == COMEDI_OUTPUT) {
- value |= 1 << (chan + 10); /* bit 10/11 set the group 1/2's mode */
- s->io_bits |= (0xF << chan);
- } else {
- value &= ~(1 << (chan + 10)); /* 1 is output, 0 is input. */
- s->io_bits &= ~(0xF << chan);
+ group = chan >> 2;
+ mask = 0xF << (group << 2);
+ switch (data[0]) {
+ case INSN_CONFIG_DIO_OUTPUT:
+ s->state |= 1 << (group + 10); // bit 10/11 set the group 1/2's mode
+ s->io_bits |= mask;
+ break;
+ case INSN_CONFIG_DIO_INPUT:
+ s->state &= ~(1 << (group + 10));// 1 is output, 0 is input.
+ s->io_bits &= ~mask;
+ break;
+ case INSN_CONFIG_DIO_QUERY:
+ data[1] = (s->io_bits & mask) ? COMEDI_OUTPUT : COMEDI_INPUT;
+ return insn->n;
+ default:
+ return -EINVAL;
}
- outw(value, ADDR_REG(REG_DIO));
+ outw(s->state, ADDR_REG(REG_DIO));
return 1;
}
#include <linux/delay.h>
#include <linux/ioport.h>
+#include <linux/sched.h>
#include <asm/termios.h>
#include <asm/ioctls.h>
+++ /dev/null
-config COWLOOP
- tristate "copy-on-write pseudo Block Driver"
- depends on BLOCK
- default n
- ---help---
- Cowloop is a "copy-on-write" pseudo block driver. It can be
- stacked on top of a "real" block driver, and catches all write
- operations on their way from the file systems layer above to
- the real driver below, effectively shielding the lower driver
- from those write accesses. The requests are then diverted to
- an ordinary file, located somewhere else (configurable). Later
- read requests are checked to see whether they can be serviced
- by the "real" block driver below, or must be pulled in from
- the diverted location. More information and userspace tools to
- use the driver are on the project's website
- http://www.ATComputing.nl/cowloop/
+++ /dev/null
-obj-$(CONFIG_COWLOOP) += cowloop.o
+++ /dev/null
-TODO:
- - checkpatch.pl cleanups
- - run sparse to ensure clean
- - fix up 32/64bit ioctl issues
- - move proc file usage to debugfs
- - audit ioctls
- - add documentation
- - get linux-fsdevel to review it
-
-Please send patches to "H.J. Thomassen" <hjt@ATComputing.nl> and
-Greg Kroah-Hartman <gregkh@suse.de>
+++ /dev/null
-/*
-** COWLOOP block device driver (2.6 kernel compliant)
-** =======================================================================
-** Read-write loop-driver with copy-on-write functionality.
-**
-** Synopsis:
-**
-** modprobe cowloop [maxcows=..] [rdofile=..... cowfile=.... [option=r]]
-**
-** Definition of number of configured cowdevices:
-** maxcows= number of configured cowdevices (default: 16)
-** (do not confuse this with MAXCOWS: absolute maximum as compiled)
-**
-** One pair of filenames can be supplied during insmod/modprobe to open
-** the first cowdevice:
-** rdofile= read-only file (or filesystem)
-** cowfile= storage-space for modified blocks of read-only file(system)
-** option=r repair cowfile automatically if it appears to be dirty
-**
-** Other cowdevices can be activated via the command "cowdev"
-** whenever the cowloop-driver is loaded.
-**
-** The read-only file may be of type 'regular' or 'block-device'.
-**
-** The cowfile must be of type 'regular'.
-** If an existing regular file is used as cowfile, its contents will be
-** used again for the current read-only file. When the cowfile has not been
-** closed properly during a previous session (i.e. rmmod cowloop), the
-** cowloop-driver refuses to open it unless the parameter "option=r" is
-** specified.
-**
-** Layout of cowfile:
-**
-** +-----------------------------+
-** | cow head block | MAPUNIT bytes
-** |-----------------------------|
-** | | MAPUNIT bytes
-** |--- ---|
-** | | MAPUNIT bytes
-** |--- ---|
-** | used-block bitmap | MAPUNIT bytes
-** |-----------------------------|
-** | gap to align start-offset |
-** | to 4K multiple |
-** |-----------------------------| <---- start-offset cow blocks
-** | |
-** | written cow blocks | MAPUNIT bytes
-** | ..... |
-**
-** cowhead block:
-** - contains general info about the rdofile which is related
-** to this cowfile
-**
-** used-block bitmap:
-** - contains one bit per block with a size of MAPUNIT bytes
-** - bit-value '1' = block has been written on cow
-** '0' = block unused on cow
-** - total bitmap rounded to multiples of MAPUNIT
-**
-** ============================================================================
-** Author: Gerlof Langeveld - AT Computing (March 2003)
-** Current maintainer: Hendrik-Jan Thomassen - AT Computing (Summer 2006)
-** Email: hjt@ATComputing.nl
-** ----------------------------------------------------------------------------
-** Copyright (C) 2003-2009 AT Consultancy
-**
-** This program is free software; you can redistribute it and/or modify it
-** under the terms of the GNU General Public License as published by the
-** Free Software Foundation; either version 2, or (at your option) any
-** later version.
-**
-** This program is distributed in the hope that it will be useful, but
-** WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-** See the GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-** ----------------------------------------------------------------------------
-**
-** Major modifications:
-**
-** 200405 Ported to kernel-version 2.6 Hendrik-Jan Thomassen
-** 200405 Added cowhead to cowfile to garantee
-** consistency with read-only file Gerlof Langeveld
-** 200405 Postponed flushing of bitmaps to improve
-** performance. Gerlof Langeveld
-** 200405 Inline recovery for dirty cowfiles. Gerlof Langeveld
-** 200502 Redesign to support more cowdevices. Gerlof Langeveld
-** 200502 Support devices/file > 2 Gbytes. Gerlof Langeveld
-** 200507 Check for free space to expand cowfile. Gerlof Langeveld
-** 200902 Upgrade for kernel 2.6.28 Hendrik-Jan Thomassen
-**
-** Inspired by
-** loop.c by Theodore Ts'o and
-** cloop.c by Paul `Rusty' Russell & Klaus Knopper.
-**
-** Design-considerations:
-**
-** For the first experiments with the cowloop-driver, the request-queue
-** made use of the do_generic_file_read() which worked fine except
-** in combination with the cloop-driver; that combination
-** resulted in a non-interruptible hangup of the system during
-** heavy load. Other experiments using the `make_request' interface also
-** resulted in unpredictable system hangups (with proper use of spinlocks).
-**
-** To overcome these problems, the cowloop-driver starts a kernel-thread
-** for every active cowdevice.
-** All read- and write-request on the read-only file and copy-on-write file
-** are handled in the context of that thread.
-** A scheme has been designed to wakeup the kernel-thread as
-** soon as I/O-requests are available in the request-queue; this thread
-** handles the requests one-by-one by calling the proper read- or
-** write-function related to the open read-only file or copy-on-write file.
-** When all pending requests have been handled, the kernel-thread goes
-** back to sleep-state.
-** This approach requires some additional context-switches; however the
-** performance loss during heavy I/O is less than 3%.
-**
-** -------------------------------------------------------------------------*/
-/* The following is the cowloop package version number. It must be
- identical to the content of the include-file "version.h" that is
- used in all supporting utilities: */
-char revision[] = "$Revision: 3.1 $"; /* cowlo_init_module() has
- assumptions about this string's format */
-
-/* Note that the following numbers are *not* the cowloop package version
- numbers, but separate revision history numbers to track the
- modifications of this particular source file: */
-/* $Log: cowloop.c,v $
-**
-** Revision 1.30 2009/02/08 hjt
-** Integrated earlier fixes
-** Upgraded to kernel 2.6.28 (thanks Jerome Poulin)
-**
-** Revision 1.29 2006/12/03 22:12:00 hjt
-** changed 'cowdevlock' from spinlock to semaphore, to avoid
-** "scheduling while atomic". Contributed by Juergen Christ.
-** Added version.h again
-**
-** Revision 1.28 2006/08/16 16:00:00 hjt
-** malloc each individual cowloopdevice struct separately
-**
-** Revision 1.27 2006/03/14 14:57:03 root
-** Removed include version.h
-**
-** Revision 1.26 2005/08/08 11:22:48 root
-** Implement possibility to close a cow file or reopen a cowfile read-only.
-**
-** Revision 1.25 2005/08/03 14:00:39 root
-** Added modinfo info to driver.
-**
-** Revision 1.24 2005/07/21 06:14:53 root
-** Cosmetic changes source code.
-**
-** Revision 1.23 2005/07/20 13:07:32 root
-** Supply ioctl to write watchdog program to react on lack of cowfile space.
-**
-** Revision 1.22 2005/07/20 07:53:34 root
-** Regular verification of free space in filesystem holding the cowfile
-** (give warnings whenever space is almost exhausted).
-** Terminology change: checksum renamed to fingerprint.
-**
-** Revision 1.21 2005/07/19 09:21:52 root
-** Removing maximum limit of 16 Gb per cowdevice.
-**
-** Revision 1.20 2005/07/19 07:50:33 root
-** Minor bugfixes and cosmetic changes.
-**
-** Revision 1.19 2005/06/10 12:29:55 root
-** Removed lock/unlock operation from cowlo_open().
-**
-** Revision 1.18 2005/05/09 12:56:26 root
-** Allow a cowdevice to be open more than once
-** (needed for support of ReiserFS and XFS).
-**
-** Revision 1.17 2005/03/17 14:36:16 root
-** Fixed some license issues.
-**
-** Revision 1.16 2005/03/07 14:42:05 root
-** Only allow one parallel open per cowdevice.
-**
-** Revision 1.15 2005/02/18 11:52:04 gerlof
-** Redesign to support more than one cowdevice > 2 Gb space.
-**
-** Revision 1.14 2004/08/17 14:19:16 gerlof
-** Modified output of /proc/cowloop.
-**
-** Revision 1.13 2004/08/16 07:21:10 gerlof
-** Separate statistical counter for read on rdofile and cowfile.
-**
-** Revision 1.12 2004/08/11 06:52:11 gerlof
-** Modified messages.
-**
-** Revision 1.11 2004/08/11 06:44:11 gerlof
-** Modified log messages.
-**
-** Revision 1.10 2004/08/10 12:27:27 gerlof
-** Cosmetic changes.
-**
-** Revision 1.9 2004/08/09 11:43:37 gerlof
-** Removed double definition of major number (COWMAJOR).
-**
-** Revision 1.8 2004/08/09 08:03:39 gerlof
-** Cleanup of messages.
-**
-** Revision 1.7 2004/05/27 06:37:33 gerlof
-** Modified /proc message.
-**
-** Revision 1.6 2004/05/26 21:23:28 gerlof
-** Modified /proc output.
-**
-** Revision 1.5 2004/05/26 13:23:34 gerlof
-** Support cowsync to force flushing the bitmaps and cowhead.
-**
-** Revision 1.4 2004/05/26 11:11:10 gerlof
-** Updated the comment to the actual situation.
-**
-** Revision 1.3 2004/05/26 10:50:00 gerlof
-** Implemented recovery-option.
-**
-** Revision 1.2 2004/05/25 15:14:41 gerlof
-** Modified bitmap flushing strategy.
-**
-*/
-
-#define COWMAJOR 241
-
-// #define COWDEBUG
-
-#ifdef COWDEBUG
-#define DEBUGP printk
-#define DCOW KERN_ALERT
-#else
-#define DEBUGP(format, x...)
-#endif
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#ifndef AUTOCONF_INCLUDED
-#include <linux/config.h>
-#endif
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/moduleparam.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/major.h>
-#include <linux/sched.h>
-#include <linux/fs.h>
-#include <linux/file.h>
-#include <linux/stat.h>
-#include <linux/vmalloc.h>
-#include <linux/slab.h>
-#include <linux/semaphore.h>
-#include <asm/uaccess.h>
-#include <linux/proc_fs.h>
-#include <linux/blkdev.h>
-#include <linux/buffer_head.h>
-#include <linux/hdreg.h>
-#include <linux/genhd.h>
-#include <linux/statfs.h>
-
-#include "cowloop.h"
-
-MODULE_LICENSE("GPL");
-/* MODULE_AUTHOR("Gerlof Langeveld <gerlof@ATComputing.nl>"); obsolete address */
-MODULE_AUTHOR("Hendrik-Jan Thomassen <hjt@ATComputing.nl>"); /* current maintainer */
-MODULE_DESCRIPTION("Copy-on-write loop driver");
-MODULE_PARM_DESC(maxcows, " Number of configured cowdevices (default 16)");
-MODULE_PARM_DESC(rdofile, " Read-only file for /dev/cow/0");
-MODULE_PARM_DESC(cowfile, " Cowfile for /dev/cow/0");
-MODULE_PARM_DESC(option, " Repair cowfile if inconsistent: option=r");
-
-#define DEVICE_NAME "cow"
-
-#define DFLCOWS 16 /* default cowloop devices */
-
-static int maxcows = DFLCOWS;
-module_param(maxcows, int, 0);
-static char *rdofile = "";
-module_param(rdofile, charp, 0);
-static char *cowfile = "";
-module_param(cowfile, charp, 0);
-static char *option = "";
-module_param(option, charp, 0);
-
-/*
-** per cowdevice several bitmap chunks are allowed of MAPCHUNKSZ each
-**
-** each bitmap chunk can describe MAPCHUNKSZ * 8 * MAPUNIT bytes of data
-** suppose:
-** MAPCHUNKSZ 4096 and MAPUNIT 1024 --> 4096 * 8 * 1024 = 32 Mb per chunk
-*/
-#define MAPCHUNKSZ 4096 /* #bytes per bitmap chunk (do not change) */
-
-#define SPCMINBLK 100 /* space threshold to give warning messages */
-#define SPCDFLINTVL 16 /* once every SPCDFLINTVL writes to cowfile, */
- /* available space in filesystem is checked */
-
-#define CALCMAP(x) ((x)/(MAPCHUNKSZ*8))
-#define CALCBYTE(x) (((x)%(MAPCHUNKSZ*8))>>3)
-#define CALCBIT(x) ((x)&7)
-
-#define ALLCOW 1
-#define ALLRDO 2
-#define MIXEDUP 3
-
-static char allzeroes[MAPUNIT];
-
-/*
-** administration per cowdevice (pair of cowfile/rdofile)
-*/
-
-/* bit-values for state */
-#define COWDEVOPEN 0x01 /* cowdevice opened */
-#define COWRWCOWOPEN 0x02 /* cowfile opened read-write */
-#define COWRDCOWOPEN 0x04 /* cowfile opened read-only */
-#define COWWATCHDOG 0x08 /* ioctl for watchdog cowfile space active */
-
-#define COWCOWOPEN (COWRWCOWOPEN|COWRDCOWOPEN)
-
-struct cowloop_device
-{
- /*
- ** current status
- */
- int state; /* bit-values (see above) */
- int opencnt; /* # opens for cowdevice */
-
- /*
- ** open file pointers
- */
- struct file *rdofp, *cowfp; /* open file pointers */
- char *rdoname, *cowname; /* file names */
-
- /*
- ** request queue administration
- */
- struct request_queue *rqueue;
- spinlock_t rqlock;
- struct gendisk *gd;
-
- /*
- ** administration about read-only file
- */
- unsigned int numblocks; /* # blocks input file in MAPUNIT */
- unsigned int blocksz; /* minimum unit to access this dev */
- unsigned long fingerprint; /* fingerprint of current rdofile */
- struct block_device *belowdev; /* block device below us */
- struct gendisk *belowgd; /* gendisk for blk dev below us */
- struct request_queue *belowq; /* req. queue of blk dev below us */
-
- /*
- ** bitmap administration to register which blocks are modified
- */
- long int mapsize; /* total size of bitmap (bytes) */
- long int mapremain; /* remaining bytes in last bitmap */
- int mapcount; /* number of bitmaps in use */
- char **mapcache; /* area with pointers to bitmaps */
-
- char *iobuf; /* databuffer of MAPUNIT bytes */
- struct cowhead *cowhead; /* buffer containing cowhead */
-
- /*
- ** administration for interface with the kernel-thread
- */
- int pid; /* pid==0: no thread available */
- struct request *req; /* request to be handled now */
- wait_queue_head_t waitq; /* wait-Q: thread waits for work */
- char closedown; /* boolean: thread exit required */
- char qfilled; /* boolean: I/O request pending */
- char iobusy; /* boolean: req under treatment */
-
- /*
- ** administration to keep track of free space in cowfile filesystem
- */
- unsigned long blksize; /* block size of fs (bytes) */
- unsigned long blktotal; /* recent total space in fs (blocks) */
- unsigned long blkavail; /* recent free space in fs (blocks) */
-
- wait_queue_head_t watchq; /* wait-Q: watcher awaits threshold */
- unsigned long watchthresh; /* threshold of watcher (blocks) */
-
- /*
- ** statistical counters
- */
- unsigned long rdoreads; /* number of read-actions rdo */
- unsigned long cowreads; /* number of read-actions cow */
- unsigned long cowwrites; /* number of write-actions */
- unsigned long nrcowblocks; /* number of blocks in use on cow */
-};
-
-static struct cowloop_device **cowdevall; /* ptr to ptrs to all cowdevices */
-static struct semaphore cowdevlock; /* generic lock for cowdevs */
-
-static struct gendisk *cowctlgd; /* gendisk control channel */
-static spinlock_t cowctlrqlock; /* for req.q. of ctrl. channel */
-
-/*
-** private directory /proc/cow
-*/
-struct proc_dir_entry *cowlo_procdir;
-
-/*
-** function prototypes
-*/
-static long int cowlo_do_request (struct request *req);
-static void cowlo_sync (void);
-static int cowlo_checkio (struct cowloop_device *, int, loff_t);
-static int cowlo_readmix (struct cowloop_device *, void *, int, loff_t);
-static int cowlo_writemix (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_readrdo (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_readcow (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_readcowraw (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_writecow (struct cowloop_device *, void *, int, loff_t);
-static long int cowlo_writecowraw(struct cowloop_device *, void *, int, loff_t);
-static int cowlo_ioctl (struct block_device *, fmode_t,
- unsigned int, unsigned long);
-static int cowlo_makepair (struct cowpair __user *);
-static int cowlo_removepair (unsigned long __user *);
-static int cowlo_watch (struct cowpair __user *);
-static int cowlo_cowctl (unsigned long __user *, int);
-static int cowlo_openpair (char *, char *, int, int);
-static int cowlo_closepair (struct cowloop_device *);
-static int cowlo_openrdo (struct cowloop_device *, char *);
-static int cowlo_opencow (struct cowloop_device *, char *, int);
-static void cowlo_undo_openrdo(struct cowloop_device *);
-static void cowlo_undo_opencow(struct cowloop_device *);
-
-/*****************************************************************************/
-/* System call handling */
-/*****************************************************************************/
-
-/*
-** handle system call open()/mount()
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int cowlo_open(struct block_device *bdev, fmode_t mode)
-{
- struct inode *inode = bdev->bd_inode;
-
- if (!inode)
- return -EINVAL;
-
- if (imajor(inode) != COWMAJOR) {
- printk(KERN_WARNING
- "cowloop - unexpected major %d\n", imajor(inode));
- return -ENODEV;
- }
-
- switch (iminor(inode)) {
- case COWCTL:
- DEBUGP(DCOW"cowloop - open %d control\n", COWCTL);
- break;
-
- default:
- DEBUGP(DCOW"cowloop - open minor %d\n", iminor(inode));
-
- if ( iminor(inode) >= maxcows )
- return -ENODEV;
-
- if ( !((cowdevall[iminor(inode)])->state & COWDEVOPEN) )
- return -ENODEV;
-
- (cowdevall[iminor(inode)])->opencnt++;
- }
-
- return 0;
-}
-
-/*
-** handle system call close()/umount()
-**
-** returns:
-** 0 - okay
-*/
-static int cowlo_release(struct gendisk *gd, fmode_t mode)
-{
- struct block_device *bdev;
- struct inode *inode;
-
- bdev = bdget_disk(gd, 0);
- inode = bdev->bd_inode;
- if (!inode)
- return 0;
-
- DEBUGP(DCOW"cowloop - release (close) minor %d\n", iminor(inode));
-
- if ( iminor(inode) != COWCTL)
- (cowdevall[iminor(inode)])->opencnt--;
-
- return 0;
-}
-
-/*
-** handle system call ioctl()
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int cowlo_ioctl(struct block_device *bdev, fmode_t mode,
- unsigned int cmd, unsigned long arg)
-{
- struct hd_geometry geo;
- struct inode *inode = bdev->bd_inode;
-
- DEBUGP(DCOW "cowloop - ioctl cmd %x\n", cmd);
-
- switch ( iminor(inode) ) {
-
- /*
- ** allowed via control device only
- */
- case COWCTL:
- switch (cmd) {
- /*
- ** write all bitmap chunks and cowheaders to cowfiles
- */
- case COWSYNC:
- down(&cowdevlock);
- cowlo_sync();
- up(&cowdevlock);
- return 0;
-
- /*
- ** open a new cowdevice (pair of rdofile/cowfile)
- */
- case COWMKPAIR:
- return cowlo_makepair((void __user *)arg);
-
- /*
- ** close a cowdevice (pair of rdofile/cowfile)
- */
- case COWRMPAIR:
- return cowlo_removepair((void __user *)arg);
-
- /*
- ** watch free space of filesystem containing cowfile
- */
- case COWWATCH:
- return cowlo_watch((void __user *)arg);
-
- /*
- ** close cowfile for active device
- */
- case COWCLOSE:
- return cowlo_cowctl((void __user *)arg, COWCLOSE);
-
- /*
- ** reopen cowfile read-only for active device
- */
- case COWRDOPEN:
- return cowlo_cowctl((void __user *)arg, COWRDOPEN);
-
- default:
- return -EINVAL;
- } /* end of switch on command */
-
- /*
- ** allowed for any other cowdevice
- */
- default:
- switch (cmd) {
- /*
- ** HDIO_GETGEO must be supported for fdisk, etc
- */
- case HDIO_GETGEO:
- geo.cylinders = 0;
- geo.heads = 0;
- geo.sectors = 0;
-
- if (copy_to_user((void __user *)arg, &geo, sizeof geo))
- return -EFAULT;
- return 0;
-
- default:
- return -EINVAL;
- } /* end of switch on ioctl-cmd code parameter */
- } /* end of switch on minor number */
-}
-
-static struct block_device_operations cowlo_fops =
-{
- .owner = THIS_MODULE,
- .open = cowlo_open, /* called upon open */
- .release = cowlo_release, /* called upon close */
- .ioctl = cowlo_ioctl, /* called upon ioctl */
-};
-
-/*
-** handle ioctl-command COWMKPAIR:
-** open a new cowdevice (pair of rdofile/cowfile) on-the-fly
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int
-cowlo_makepair(struct cowpair __user *arg)
-{
- int i, rv=0;
- struct cowpair cowpair;
- unsigned char *cowpath;
- unsigned char *rdopath;
-
- /*
- ** retrieve info about pathnames
- */
- if ( copy_from_user(&cowpair, arg, sizeof cowpair) )
- return -EFAULT;
-
- if ( (MAJOR(cowpair.device) != COWMAJOR) && (cowpair.device != ANYDEV) )
- return -EINVAL;
-
- if ( (MINOR(cowpair.device) >= maxcows) && (cowpair.device != ANYDEV) )
- return -EINVAL;
-
- /*
- ** retrieve pathname strings
- */
- if ( (cowpair.cowflen > PATH_MAX) || (cowpair.rdoflen > PATH_MAX) )
- return -ENAMETOOLONG;
-
- if ( !(cowpath = kmalloc(cowpair.cowflen+1, GFP_KERNEL)) )
- return -ENOMEM;
-
- if ( copy_from_user(cowpath, (void __user *)cowpair.cowfile,
- cowpair.cowflen) ) {
- kfree(cowpath);
- return -EFAULT;
- }
- *(cowpath+cowpair.cowflen) = 0;
-
- if ( !(rdopath = kmalloc(cowpair.rdoflen+1, GFP_KERNEL)) ) {
- kfree(cowpath);
- return -ENOMEM;
- }
-
- if ( copy_from_user(rdopath, (void __user *)cowpair.rdofile,
- cowpair.rdoflen) ) {
- kfree(rdopath);
- kfree(cowpath);
- return -EFAULT;
- }
- *(rdopath+cowpair.rdoflen) = 0;
-
- /*
- ** open new cowdevice
- */
- if ( cowpair.device == ANYDEV) {
- /*
- ** search first unused minor
- */
- for (i=0, rv=-EBUSY; i < maxcows; i++) {
- if ( !((cowdevall[i])->state & COWDEVOPEN) ) {
- rv = cowlo_openpair(rdopath, cowpath, 0, i);
- break;
- }
- }
-
- if (rv) { /* open failed? */
- kfree(rdopath);
- kfree(cowpath);
- return rv;
- }
-
- /*
- ** return newly allocated cowdevice to user space
- */
- cowpair.device = MKDEV(COWMAJOR, i);
-
- if ( copy_to_user(arg, &cowpair, sizeof cowpair)) {
- kfree(rdopath);
- kfree(cowpath);
- return -EFAULT;
- }
- } else { /* specific minor requested */
- if ( (rv = cowlo_openpair(rdopath, cowpath, 0,
- MINOR(cowpair.device)))) {
- kfree(rdopath);
- kfree(cowpath);
- return rv;
- }
- }
-
- return 0;
-}
-
-/*
-** handle ioctl-command COWRMPAIR:
-** deactivate an existing cowdevice (pair of rdofile/cowfile) on-the-fly
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int
-cowlo_removepair(unsigned long __user *arg)
-{
- unsigned long cowdevice;
- struct cowloop_device *cowdev;
-
- /*
- ** retrieve info about device to be removed
- */
- if ( copy_from_user(&cowdevice, arg, sizeof cowdevice))
- return -EFAULT;
-
- /*
- ** verify major-minor number
- */
- if ( MAJOR(cowdevice) != COWMAJOR)
- return -EINVAL;
-
- if ( MINOR(cowdevice) >= maxcows)
- return -EINVAL;
-
- cowdev = cowdevall[MINOR(cowdevice)];
-
- if ( !(cowdev->state & COWDEVOPEN) )
- return -ENODEV;
-
- /*
- ** synchronize bitmaps and close cowdevice
- */
- if (cowdev->state & COWRWCOWOPEN) {
- down(&cowdevlock);
- cowlo_sync();
- up(&cowdevlock);
- }
-
- return cowlo_closepair(cowdev);
-}
-
-/*
-** handle ioctl-command COWWATCH:
-** watch the free space of the filesystem containing a cowfile
-** of an open cowdevice
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int
-cowlo_watch(struct cowpair __user *arg)
-{
- struct cowloop_device *cowdev;
- struct cowwatch cowwatch;
-
- /*
- ** retrieve structure holding info
- */
- if ( copy_from_user(&cowwatch, arg, sizeof cowwatch))
- return -EFAULT;
-
- /*
- ** verify if cowdevice exists and is currently open
- */
- if ( MINOR(cowwatch.device) >= maxcows)
- return -EINVAL;
-
- cowdev = cowdevall[MINOR(cowwatch.device)];
-
- if ( !(cowdev->state & COWDEVOPEN) )
- return -ENODEV;
-
- /*
- ** if the WATCHWAIT-option is set, wait until the indicated
- ** threshold is reached (only one waiter allowed)
- */
- if (cowwatch.flags & WATCHWAIT) {
- /*
- ** check if already another waiter active
- ** for this cowdevice
- */
- if (cowdev->state & COWWATCHDOG)
- return -EAGAIN;
-
- cowdev->state |= COWWATCHDOG;
-
- cowdev->watchthresh = (unsigned long long)
- cowwatch.threshold /
- (cowdev->blksize / 1024);
-
- if (wait_event_interruptible(cowdev->watchq,
- cowdev->watchthresh >= cowdev->blkavail)) {
- cowdev->state &= ~COWWATCHDOG;
- return EINTR;
- }
-
- cowdev->state &= ~COWWATCHDOG;
- }
-
- cowwatch.totalkb = (unsigned long long)cowdev->blktotal *
- cowdev->blksize / 1024;
- cowwatch.availkb = (unsigned long long)cowdev->blkavail *
- cowdev->blksize / 1024;
-
- if ( copy_to_user(arg, &cowwatch, sizeof cowwatch))
- return -EFAULT;
-
- return 0;
-}
-
-/*
-** handle ioctl-commands COWCLOSE and COWRDOPEN:
-** COWCLOSE - close the cowfile while the cowdevice remains open;
-** this allows an unmount of the filesystem on which
-** the cowfile resides
-** COWRDOPEN - close the cowfile and reopen it for read-only;
-** this allows a remount read-ony of the filesystem
-** on which the cowfile resides
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int
-cowlo_cowctl(unsigned long __user *arg, int cmd)
-{
- struct cowloop_device *cowdev;
- unsigned long cowdevice;
-
- /*
- ** retrieve info about device to be removed
- */
- if ( copy_from_user(&cowdevice, arg, sizeof cowdevice))
- return -EFAULT;
-
- /*
- ** verify major-minor number
- */
- if ( MAJOR(cowdevice) != COWMAJOR)
- return -EINVAL;
-
- if ( MINOR(cowdevice) >= maxcows)
- return -EINVAL;
-
- cowdev = cowdevall[MINOR(cowdevice)];
-
- if ( !(cowdev->state & COWDEVOPEN) )
- return -ENODEV;
-
- /*
- ** synchronize bitmaps and close cowfile
- */
- if (cowdev->state & COWRWCOWOPEN) {
- down(&cowdevlock);
- cowlo_sync();
- up(&cowdevlock);
- }
-
- /*
- ** handle specific ioctl-command
- */
- switch (cmd) {
- case COWRDOPEN:
- /*
- ** if the cowfile is still opened read-write
- */
- if (cowdev->state & COWRWCOWOPEN) {
- /*
- ** close the cowfile
- */
- if (cowdev->cowfp)
- filp_close(cowdev->cowfp, 0);
-
- cowdev->state &= ~COWRWCOWOPEN;
-
- /*
- ** open again for read-only
- */
- cowdev->cowfp = filp_open(cowdev->cowname,
- O_RDONLY|O_LARGEFILE, 0600);
-
- if ( (cowdev->cowfp == NULL) || IS_ERR(cowdev->cowfp) ) {
- printk(KERN_ERR
- "cowloop - failed to reopen cowfile %s\n",
- cowdev->cowname);
- return -EINVAL;
- }
-
- /*
- ** mark cowfile open for read-only
- */
- cowdev->state |= COWRDCOWOPEN;
- } else {
- return -EINVAL;
- }
- break;
-
- case COWCLOSE:
- /*
- ** if the cowfile is still open
- */
- if (cowdev->state & COWCOWOPEN) {
- /*
- ** close the cowfile
- */
- if (cowdev->cowfp)
- filp_close(cowdev->cowfp, 0);
-
- cowdev->state &= ~COWCOWOPEN;
- }
- }
-
- return 0;
-}
-
-
-/*****************************************************************************/
-/* Handling of I/O-requests for a cowdevice */
-/*****************************************************************************/
-
-/*
-** function to be called by core-kernel to handle the I/O-requests
-** in the queue
-*/
-static void cowlo_request(struct request_queue *q)
-{
- struct request *req;
- struct cowloop_device *cowdev;
-
- DEBUGP(DCOW "cowloop - request function called....\n");
-
- while((req = blk_peek_request(q)) != NULL) {
- DEBUGP(DCOW "cowloop - got next request\n");
-
- if (! blk_fs_request(req)) {
- /* this is not a normal file system request */
- __blk_end_request_cur(req, -EIO);
- continue;
- }
- cowdev = req->rq_disk->private_data;
-
- if (cowdev->iobusy)
- return;
- else
- cowdev->iobusy = 1;
-
- /*
- ** when no kernel-thread is available, the request will
- ** produce an I/O-error
- */
- if (!cowdev->pid) {
- printk(KERN_ERR"cowloop - no thread available\n");
- __blk_end_request_cur(req, -EIO); /* request failed */
- cowdev->iobusy = 0;
- continue;
- }
-
- /*
- ** handle I/O-request in the context of the kernel-thread
- */
- cowdev->req = req;
- cowdev->qfilled = 1;
-
- wake_up_interruptible_sync(&cowdev->waitq);
-
- /*
- ** get out of this function now while the I/O-request is
- ** under treatment of the kernel-thread; this function
- ** will be called again after the current I/O-request has
- ** been finished by the thread
- */
- return;
- }
-}
-
-/*
-** daemon-process (kernel-thread) executes this function
-*/
-static int
-cowlo_daemon(struct cowloop_device *cowdev)
-{
- int rv;
- int minor;
- char myname[16];
-
- for (minor = 0; minor < maxcows; minor++) {
- if (cowdev == cowdevall[minor]) break;
- }
- sprintf(myname, "cowloopd%d", minor);
-
- daemonize(myname);
-
- while (!cowdev->closedown) {
- /*
- ** sleep while waiting for an I/O request;
- ** note that no non-interruptible wait has been used
- ** because the non-interruptible version of
- ** a *synchronous* wake_up does not exist (any more)
- */
- if (wait_event_interruptible(cowdev->waitq, cowdev->qfilled)){
- flush_signals(current); /* ignore signal-based wakeup */
- continue;
- }
-
- if (cowdev->closedown) /* module will be unloaded ? */{
- cowdev->pid = 0;
- return 0;
- }
-
- /*
- ** woken up by the I/O-request handler: treat requested I/O
- */
- cowdev->qfilled = 0;
-
- rv = cowlo_do_request(cowdev->req);
-
- /*
- ** reacquire the queue-spinlock for manipulating
- ** the request-queue and dequeue the request
- */
- spin_lock_irq(&cowdev->rqlock);
-
- __blk_end_request_cur(cowdev->req, rv);
- cowdev->iobusy = 0;
-
- /*
- ** initiate the next request from the queue
- */
- cowlo_request(cowdev->rqueue);
-
- spin_unlock_irq(&cowdev->rqlock);
- }
- return 0;
-}
-
-/*
-** function to be called in the context of the kernel thread
-** to handle the queued I/O-requests
-**
-** returns:
-** 0 - fail
-** 1 - success
-*/
-static long int
-cowlo_do_request(struct request *req)
-{
- unsigned long len;
- long int rv;
- loff_t offset;
- struct cowloop_device *cowdev = req->rq_disk->private_data;
-
- /*
- ** calculate some variables which are needed later on
- */
- len = blk_rq_cur_sectors(req) << 9;
- offset = (loff_t) blk_rq_pos(req) << 9;
-
- DEBUGP(DCOW"cowloop - req cmd=%d offset=%lld len=%lu addr=%p\n",
- *(req->cmd), offset, len, req->buffer);
-
- /*
- ** handle READ- or WRITE-request
- */
- switch (rq_data_dir(req)) {
- /**********************************************************/
- case READ:
- switch ( cowlo_checkio(cowdev, len, offset) ) {
- case ALLCOW:
- rv = cowlo_readcow(cowdev, req->buffer, len, offset);
- break;
-
- case ALLRDO:
- rv = cowlo_readrdo(cowdev, req->buffer, len, offset);
- break;
-
- case MIXEDUP:
- rv = cowlo_readmix(cowdev, req->buffer, len, offset);
- break;
-
- default:
- rv = 0; /* never happens */
- }
- break;
-
- /**********************************************************/
- case WRITE:
- switch ( cowlo_checkio(cowdev, len, offset) ) {
- case ALLCOW:
- /*
- ** straight-forward write will do...
- */
- DEBUGP(DCOW"cowloop - write straight ");
-
- rv = cowlo_writecow(cowdev, req->buffer, len, offset);
- break; /* from switch */
-
- case ALLRDO:
- if ( (len & MUMASK) == 0) {
- DEBUGP(DCOW"cowloop - write straight ");
-
- rv = cowlo_writecow(cowdev, req->buffer,
- len, offset);
- break;
- }
-
- case MIXEDUP:
- rv = cowlo_writemix(cowdev, req->buffer, len, offset);
- break;
-
- default:
- rv = 0; /* never happens */
- }
- break;
-
- default:
- printk(KERN_ERR
- "cowloop - unrecognized command %d\n", *(req->cmd));
- rv = 0;
- }
-
- return (rv <= 0 ? 0 : 1);
-}
-
-/*
-** check for a given I/O-request if all underlying blocks
-** (with size MAPUNIT) are either in the read-only file or in
-** the cowfile (or a combination of the two)
-**
-** returns:
-** ALLRDO - all underlying blocks in rdofile
-** ALLCOW - all underlying blocks in cowfile
-** MIXEDUP - underlying blocks partly in rdofile and partly in cowfile
-*/
-static int
-cowlo_checkio(struct cowloop_device *cowdev, int len, loff_t offset)
-{
- unsigned long mapnum, bytenum, bitnum, blocknr, partlen;
- long int totcnt, cowcnt;
- char *mc;
-
- /*
- ** notice that the requested block might cross
- ** a blocksize boundary while one of the concerned
- ** blocks resides in the read-only file and another
- ** one in the copy-on-write file; in that case the
- ** request will be broken up into pieces
- */
- if ( (len <= MAPUNIT) &&
- (MAPUNIT - (offset & MUMASK) <= len) ) {
- /*
- ** easy situation:
- ** requested data-block entirely fits within
- ** the mapunit used for the bitmap
- ** check if that block is located in rdofile or
- ** cowfile
- */
- blocknr = offset >> MUSHIFT;
-
- mapnum = CALCMAP (blocknr);
- bytenum = CALCBYTE(blocknr);
- bitnum = CALCBIT (blocknr);
-
- if (*(*(cowdev->mapcache+mapnum)+bytenum)&(1<<bitnum))
- return ALLCOW;
- else
- return ALLRDO;
- }
-
- /*
- ** less easy situation:
- ** the requested data-block does not fit within the mapunit
- ** used for the bitmap
- ** check if *all* underlying blocks involved reside on the rdofile
- ** or the cowfile (so still no breakup required)
- */
- for (cowcnt=totcnt=0; len > 0; len-=partlen, offset+=partlen, totcnt++){
- /*
- ** calculate blocknr of involved block
- */
- blocknr = offset >> MUSHIFT;
-
- /*
- ** calculate partial length for this transfer
- */
- partlen = MAPUNIT - (offset & MUMASK);
- if (partlen > len)
- partlen = len;
-
- /*
- ** is this block located in the cowfile
- */
- mapnum = CALCMAP (blocknr);
- bytenum = CALCBYTE(blocknr);
- bitnum = CALCBIT (blocknr);
-
- mc = *(cowdev->mapcache+mapnum);
-
- if (*(mc+bytenum)&(1<<bitnum))
- cowcnt++;;
-
- DEBUGP(DCOW
- "cowloop - check %lu - map %lu, byte %lu, bit %lu, "
- "cowcnt %ld, totcnt %ld %02x %p\n",
- blocknr, mapnum, bytenum, bitnum, cowcnt, totcnt,
- *(mc+bytenum), mc);
- }
-
- if (cowcnt == 0) /* all involved blocks on rdofile? */
- return ALLRDO;
-
- if (cowcnt == totcnt) /* all involved blocks on cowfile? */
- return ALLCOW;
-
- /*
- ** situation somewhat more complicated:
- ** involved underlying blocks spread over both files
- */
- return MIXEDUP;
-}
-
-/*
-** read requested chunk partly from rdofile and partly from cowfile
-**
-** returns:
-** 0 - fail
-** 1 - success
-*/
-static int
-cowlo_readmix(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
- unsigned long mapnum, bytenum, bitnum, blocknr, partlen;
- long int rv;
- char *mc;
-
- /*
- ** complicated approach: breakup required of read-request
- */
- for (rv=1; len > 0; len-=partlen, buf+=partlen, offset+=partlen) {
- /*
- ** calculate blocknr of entire block
- */
- blocknr = offset >> MUSHIFT;
-
- /*
- ** calculate partial length for this transfer
- */
- partlen = MAPUNIT - (offset & MUMASK);
- if (partlen > len)
- partlen = len;
-
- /*
- ** is this block located in the cowfile
- */
- mapnum = CALCMAP (blocknr);
- bytenum = CALCBYTE(blocknr);
- bitnum = CALCBIT (blocknr);
- mc = *(cowdev->mapcache+mapnum);
-
- if (*(mc+bytenum)&(1<<bitnum)) {
- /*
- ** read (partial) block from cowfile
- */
- DEBUGP(DCOW"cowloop - split read "
- "cow partlen=%ld off=%lld\n", partlen, offset);
-
- if (cowlo_readcow(cowdev, buf, partlen, offset) <= 0)
- rv = 0;
- } else {
- /*
- ** read (partial) block from rdofile
- */
- DEBUGP(DCOW"cowloop - split read "
- "rdo partlen=%ld off=%lld\n", partlen, offset);
-
- if (cowlo_readrdo(cowdev, buf, partlen, offset) <= 0)
- rv = 0;
- }
- }
-
- return rv;
-}
-
-/*
-** chunk to be written to the cowfile needs pieces to be
-** read from the rdofile
-**
-** returns:
-** 0 - fail
-** 1 - success
-*/
-static int
-cowlo_writemix(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
- unsigned long mapnum, bytenum, bitnum, blocknr, partlen;
- long int rv;
- char *mc;
-
- /*
- ** somewhat more complicated stuff is required:
- ** if the request is larger than one underlying
- ** block or is spread over two underlying blocks,
- ** split the request into pieces; if a block does not
- ** start at a block boundary, take care that
- ** surrounding data is read first (if needed),
- ** fit the new data in and write it as a full block
- */
- for (rv=1; len > 0; len-=partlen, buf+=partlen, offset+=partlen) {
- /*
- ** calculate partial length for this transfer
- */
- partlen = MAPUNIT - (offset & MUMASK);
- if (partlen > len)
- partlen = len;
-
- /*
- ** calculate blocknr of entire block
- */
- blocknr = offset >> MUSHIFT;
-
- /*
- ** has this block been written before?
- */
- mapnum = CALCMAP (blocknr);
- bytenum = CALCBYTE(blocknr);
- bitnum = CALCBIT (blocknr);
- mc = *(cowdev->mapcache+mapnum);
-
- if (*(mc+bytenum)&(1<<bitnum)) {
- /*
- ** block has been written before;
- ** write transparantly to cowfile
- */
- DEBUGP(DCOW
- "cowloop - splitwr transp\n");
-
- if (cowlo_writecow(cowdev, buf, partlen, offset) <= 0)
- rv = 0;
- } else {
- /*
- ** block has never been written before,
- ** so read entire block from
- ** read-only file first, unless
- ** a full block is requested to
- ** be written
- */
- if (partlen < MAPUNIT) {
- if (cowlo_readrdo(cowdev, cowdev->iobuf,
- MAPUNIT, (loff_t)blocknr << MUSHIFT) <= 0)
- rv = 0;
- }
-
- /*
- ** transfer modified part into
- ** the block just read
- */
- memcpy(cowdev->iobuf + (offset & MUMASK), buf, partlen);
-
- /*
- ** write entire block to cowfile
- */
- DEBUGP(DCOW"cowloop - split "
- "partlen=%ld off=%lld\n",
- partlen, (loff_t)blocknr << MUSHIFT);
-
- if (cowlo_writecow(cowdev, cowdev->iobuf, MAPUNIT,
- (loff_t)blocknr << MUSHIFT) <= 0)
- rv = 0;
- }
- }
-
- return rv;
-}
-
-/*****************************************************************************/
-/* I/O-support for read-only file and copy-on-write file */
-/*****************************************************************************/
-
-/*
-** read data from the read-only file
-**
-** return-value: similar to user-mode read
-*/
-static long int
-cowlo_readrdo(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
- long int rv;
- mm_segment_t old_fs;
- loff_t saveoffset = offset;
-
- DEBUGP(DCOW"cowloop - readrdo called\n");
-
- old_fs = get_fs();
- set_fs( get_ds() );
- rv = cowdev->rdofp->f_op->read(cowdev->rdofp, buf, len, &offset);
- set_fs(old_fs);
-
- if (rv < len) {
- printk(KERN_WARNING "cowloop - read-failure %ld on rdofile"
- "- offset=%lld len=%d\n",
- rv, saveoffset, len);
- }
-
- cowdev->rdoreads++;
- return rv;
-}
-
-/*
-** read cowfile from a modified offset, i.e. skipping the bitmap and cowhead
-**
-** return-value: similar to user-mode read
-*/
-static long int
-cowlo_readcow(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
- DEBUGP(DCOW"cowloop - readcow called\n");
-
- offset += cowdev->cowhead->doffset;
-
- return cowlo_readcowraw(cowdev, buf, len, offset);
-}
-
-/*
-** read cowfile from an absolute offset
-**
-** return-value: similar to user-mode read
-*/
-static long int
-cowlo_readcowraw(struct cowloop_device *cowdev,
- void *buf, int len, loff_t offset)
-{
- long int rv;
- mm_segment_t old_fs;
- loff_t saveoffset = offset;
-
- DEBUGP(DCOW"cowloop - readcowraw called\n");
-
- /*
- ** be sure that cowfile is opened for read-write
- */
- if ( !(cowdev->state & COWCOWOPEN) ) {
- printk(KERN_WARNING
- "cowloop - read request from cowfile refused\n");
-
- return -EBADF;
- }
-
- /*
- ** issue low level read
- */
- old_fs = get_fs();
- set_fs( get_ds() );
- rv = cowdev->cowfp->f_op->read(cowdev->cowfp, buf, len, &offset);
- set_fs(old_fs);
-
- if (rv < len) {
- printk(KERN_WARNING
- "cowloop - read-failure %ld on cowfile"
- "- offset=%lld len=%d\n", rv, saveoffset, len);
- }
-
- cowdev->cowreads++;
- return rv;
-}
-
-/*
-** write cowfile from a modified offset, i.e. skipping the bitmap and cowhead
-**
-** if a block is written for the first time while its contents consists
-** of binary zeroes only, the concerning bitmap is flushed to the cowfile
-**
-** return-value: similar to user-mode write
-*/
-static long int
-cowlo_writecow(struct cowloop_device *cowdev, void *buf, int len, loff_t offset)
-{
- long int rv;
- unsigned long mapnum=0, mapbyte=0, mapbit=0, cowblock=0, partlen;
- char *tmpptr, *mapptr = NULL;
- loff_t tmpoffset, mapoffset = 0;
-
- DEBUGP(DCOW"cowloop - writecow called\n");
-
- /*
- ** be sure that cowfile is opened for read-write
- */
- if ( !(cowdev->state & COWRWCOWOPEN) ) {
- printk(KERN_WARNING
- "cowloop - Write request to cowfile refused\n");
-
- return -EBADF;
- }
-
- /*
- ** write the entire block to the cowfile
- */
- tmpoffset = offset + cowdev->cowhead->doffset;
-
- rv = cowlo_writecowraw(cowdev, buf, len, tmpoffset);
-
- /*
- ** verify if enough space available on filesystem holding
- ** the cowfile
- ** - when the last write failed (might be caused by lack of space)
- ** - when a watcher is active (to react adequatly)
- ** - when the previous check indicated fs was almost full
- ** - with regular intervals
- */
- if ( (rv <= 0) ||
- (cowdev->state & COWWATCHDOG) ||
- (cowdev->blkavail / 2 < SPCDFLINTVL) ||
- (cowdev->cowwrites % SPCDFLINTVL == 0) ) {
- struct kstatfs ks;
-
- if (vfs_statfs(cowdev->cowfp->f_dentry, &ks)==0){
- if (ks.f_bavail <= SPCMINBLK) {
- switch (ks.f_bavail) {
- case 0:
- case 1:
- case 2:
- case 3:
- printk(KERN_ALERT
- "cowloop - "
- "ALERT: cowfile full!\n");
- break;
-
- default:
- printk(KERN_WARNING
- "cowloop - cowfile almost "
- "full (only %llu Kb free)\n",
- (unsigned long long)
- ks.f_bsize * ks.f_bavail /1024);
- }
- }
-
- cowdev->blktotal = ks.f_blocks;
- cowdev->blkavail = ks.f_bavail;
-
- /*
- ** wakeup watcher if threshold has been reached
- */
- if ( (cowdev->state & COWWATCHDOG) &&
- (cowdev->watchthresh >= cowdev->blkavail) ) {
- wake_up_interruptible(&cowdev->watchq);
- }
- }
- }
-
- if (rv <= 0)
- return rv;
-
- DEBUGP(DCOW"cowloop - block written\n");
-
- /*
- ** check if block(s) is/are written to the cowfile
- ** for the first time; if so, adapt the bitmap
- */
- for (; len > 0; len-=partlen, offset+=partlen, buf+=partlen) {
- /*
- ** calculate partial length for this transfer
- */
- partlen = MAPUNIT - (offset & MUMASK);
- if (partlen > len)
- partlen = len;
-
- /*
- ** calculate bitnr of written chunk of cowblock
- */
- cowblock = offset >> MUSHIFT;
-
- mapnum = CALCMAP (cowblock);
- mapbyte = CALCBYTE(cowblock);
- mapbit = CALCBIT (cowblock);
-
- if (*(*(cowdev->mapcache+mapnum)+mapbyte) & (1<<mapbit))
- continue; /* already written before */
-
- /*
- ** if the block is written for the first time,
- ** the corresponding bit should be set in the bitmap
- */
- *(*(cowdev->mapcache+mapnum)+mapbyte) |= (1<<mapbit);
-
- cowdev->nrcowblocks++;
-
- DEBUGP(DCOW"cowloop - bitupdate blk=%ld map=%ld "
- "byte=%ld bit=%ld\n",
- cowblock, mapnum, mapbyte, mapbit);
-
- /*
- ** check if the cowhead in the cowfile is currently
- ** marked clean; if so, mark it dirty and flush it
- */
- if ( !(cowdev->cowhead->flags &= COWDIRTY)) {
- cowdev->cowhead->flags |= COWDIRTY;
-
- cowlo_writecowraw(cowdev, cowdev->cowhead,
- MAPUNIT, (loff_t)0);
- }
-
- /*
- ** if the written datablock contained binary zeroes,
- ** the bitmap block should be marked to be flushed to disk
- ** (blocks containing all zeroes cannot be recovered by
- ** the cowrepair-program later on if cowloop is not properly
- ** removed via rmmod)
- */
- if ( memcmp(buf, allzeroes, partlen) ) /* not all zeroes? */
- continue; /* no flush needed */
-
- /*
- ** calculate positions of bitmap block to be flushed
- ** - pointer of bitmap block in memory
- ** - offset of bitmap block in cowfile
- */
- tmpptr = *(cowdev->mapcache+mapnum) + (mapbyte & (~MUMASK));
- tmpoffset = (loff_t) MAPUNIT + mapnum * MAPCHUNKSZ +
- (mapbyte & (~MUMASK));
-
- /*
- ** flush a bitmap block at the moment that all bits have
- ** been set in that block, i.e. at the moment that we
- ** switch to another bitmap block
- */
- if ( (mapoffset != 0) && (mapoffset != tmpoffset) ) {
- if (cowlo_writecowraw(cowdev, mapptr, MAPUNIT,
- mapoffset) < 0) {
- printk(KERN_WARNING
- "cowloop - write-failure on bitmap - "
- "blk=%ld map=%ld byte=%ld bit=%ld\n",
- cowblock, mapnum, mapbyte, mapbit);
- }
-
- DEBUGP(DCOW"cowloop - bitmap blk written %lld\n",
- mapoffset);
- }
-
- /*
- ** remember offset in cowfile and offset in memory
- ** for bitmap to be flushed; flushing will be done
- ** as soon as all updates in this bitmap block have
- ** been done
- */
- mapoffset = tmpoffset;
- mapptr = tmpptr;
- }
-
- /*
- ** any new block written containing binary zeroes?
- */
- if (mapoffset) {
- if (cowlo_writecowraw(cowdev, mapptr, MAPUNIT, mapoffset) < 0) {
- printk(KERN_WARNING
- "cowloop - write-failure on bitmap - "
- "blk=%ld map=%ld byte=%ld bit=%ld\n",
- cowblock, mapnum, mapbyte, mapbit);
- }
-
- DEBUGP(DCOW"cowloop - bitmap block written %lld\n", mapoffset);
- }
-
- return rv;
-}
-
-/*
-** write cowfile from an absolute offset
-**
-** return-value: similar to user-mode write
-*/
-static long int
-cowlo_writecowraw(struct cowloop_device *cowdev,
- void *buf, int len, loff_t offset)
-{
- long int rv;
- mm_segment_t old_fs;
- loff_t saveoffset = offset;
-
- DEBUGP(DCOW"cowloop - writecowraw called\n");
-
- /*
- ** be sure that cowfile is opened for read-write
- */
- if ( !(cowdev->state & COWRWCOWOPEN) ) {
- printk(KERN_WARNING
- "cowloop - write request to cowfile refused\n");
-
- return -EBADF;
- }
-
- /*
- ** issue low level write
- */
- old_fs = get_fs();
- set_fs( get_ds() );
- rv = cowdev->cowfp->f_op->write(cowdev->cowfp, buf, len, &offset);
- set_fs(old_fs);
-
- if (rv < len) {
- printk(KERN_WARNING
- "cowloop - write-failure %ld on cowfile"
- "- offset=%lld len=%d\n", rv, saveoffset, len);
- }
-
- cowdev->cowwrites++;
- return rv;
-}
-
-
-/*
-** readproc-function: called when the corresponding /proc-file is read
-*/
-static int
-cowlo_readproc(char *buf, char **start, off_t pos, int cnt, int *eof, void *p)
-{
- struct cowloop_device *cowdev = p;
-
- revision[sizeof revision - 3] = '\0';
-
- return sprintf(buf,
- " cowloop version: %9s\n\n"
- " device state: %s%s%s%s\n"
- " number of opens: %9d\n"
- " pid of thread: %9d\n\n"
- " read-only file: %9s\n"
- " rdoreads: %9lu\n\n"
- "copy-on-write file: %9s\n"
- " state cowfile: %9s\n"
- " bitmap-blocks: %9lu (of %d bytes)\n"
- " cowblocks in use: %9lu (of %d bytes)\n"
- " cowreads: %9lu\n"
- " cowwrites: %9lu\n",
- &revision[11],
-
- cowdev->state & COWDEVOPEN ? "devopen " : "",
- cowdev->state & COWRWCOWOPEN ? "cowopenrw " : "",
- cowdev->state & COWRDCOWOPEN ? "cowopenro " : "",
- cowdev->state & COWWATCHDOG ? "watchdog " : "",
-
- cowdev->opencnt,
- cowdev->pid,
- cowdev->rdoname,
- cowdev->rdoreads,
- cowdev->cowname,
- cowdev->cowhead->flags & COWDIRTY ? "dirty":"clean",
- cowdev->mapsize >> MUSHIFT, MAPUNIT,
- cowdev->nrcowblocks, MAPUNIT,
- cowdev->cowreads,
- cowdev->cowwrites);
-}
-
-/*****************************************************************************/
-/* Setup and destroy cowdevices */
-/*****************************************************************************/
-
-/*
-** open and prepare a cowdevice (rdofile and cowfile) and allocate bitmaps
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int
-cowlo_openpair(char *rdof, char *cowf, int autorecover, int minor)
-{
- long int rv;
- struct cowloop_device *cowdev = cowdevall[minor];
- struct kstatfs ks;
-
- down(&cowdevlock);
-
- /*
- ** requested device exists?
- */
- if (minor >= maxcows) {
- up(&cowdevlock);
- return -ENODEV;
- }
-
- /*
- ** requested device already assigned to cowdevice?
- */
- if (cowdev->state & COWDEVOPEN) {
- up(&cowdevlock);
- return -EBUSY;
- }
-
- /*
- ** initialize administration
- */
- memset(cowdev, 0, sizeof *cowdev);
-
- spin_lock_init (&cowdev->rqlock);
- init_waitqueue_head(&cowdev->waitq);
- init_waitqueue_head(&cowdev->watchq);
-
- /*
- ** open the read-only file
- */
- DEBUGP(DCOW"cowloop - call openrdo....\n");
-
- if ( (rv = cowlo_openrdo(cowdev, rdof)) ) {
- cowlo_undo_openrdo(cowdev);
- up(&cowdevlock);
- return rv;
- }
-
- /*
- ** open the cowfile
- */
- DEBUGP(DCOW"cowloop - call opencow....\n");
-
- if ( (rv = cowlo_opencow(cowdev, cowf, autorecover)) ) {
- cowlo_undo_openrdo(cowdev);
- cowlo_undo_opencow(cowdev);
- up(&cowdevlock);
- return rv;
- }
-
- /*
- ** administer total and available size of filesystem holding cowfile
- */
- if (vfs_statfs(cowdev->cowfp->f_dentry, &ks)==0) {
- cowdev->blksize = ks.f_bsize;
- cowdev->blktotal = ks.f_blocks;
- cowdev->blkavail = ks.f_bavail;
- } else {
- cowdev->blksize = 1024; /* avoid division by zero */
- }
-
- /*
- ** flush the (recovered) bitmaps and cowhead to the cowfile
- */
- DEBUGP(DCOW"cowloop - call cowsync....\n");
-
- cowlo_sync();
-
- /*
- ** allocate gendisk for the cow device
- */
- DEBUGP(DCOW"cowloop - alloc disk....\n");
-
- if ((cowdev->gd = alloc_disk(1)) == NULL) {
- printk(KERN_WARNING
- "cowloop - unable to alloc_disk for cowloop\n");
-
- cowlo_undo_openrdo(cowdev);
- cowlo_undo_opencow(cowdev);
- up(&cowdevlock);
- return -ENOMEM;
- }
-
- cowdev->gd->major = COWMAJOR;
- cowdev->gd->first_minor = minor;
- cowdev->gd->minors = 1;
- cowdev->gd->fops = &cowlo_fops;
- cowdev->gd->private_data = cowdev;
- sprintf(cowdev->gd->disk_name, "%s%d", DEVICE_NAME, minor);
-
- /* in .5 Kb units */
- set_capacity(cowdev->gd, (cowdev->numblocks*(MAPUNIT/512)));
-
- DEBUGP(DCOW"cowloop - init request queue....\n");
-
- if ((cowdev->rqueue = blk_init_queue(cowlo_request, &cowdev->rqlock))
- == NULL) {
- printk(KERN_WARNING
- "cowloop - unable to get request queue for cowloop\n");
-
- del_gendisk(cowdev->gd);
- cowlo_undo_openrdo(cowdev);
- cowlo_undo_opencow(cowdev);
- up(&cowdevlock);
- return -EINVAL;
- }
-
- blk_queue_logical_block_size(cowdev->rqueue, cowdev->blocksz);
- cowdev->gd->queue = cowdev->rqueue;
-
- /*
- ** start kernel thread to handle requests
- */
- DEBUGP(DCOW"cowloop - kickoff daemon....\n");
-
- cowdev->pid = kernel_thread((int (*)(void *))cowlo_daemon, cowdev, 0);
-
- /*
- ** create a file below directory /proc/cow for this new cowdevice
- */
- if (cowlo_procdir) {
- char tmpname[64];
-
- sprintf(tmpname, "%d", minor);
-
- create_proc_read_entry(tmpname, 0 , cowlo_procdir,
- cowlo_readproc, cowdev);
- }
-
- cowdev->state |= COWDEVOPEN;
-
- cowdev->rdoname = rdof;
- cowdev->cowname = cowf;
-
- /*
- ** enable the new disk; this triggers the first request!
- */
- DEBUGP(DCOW"cowloop - call add_disk....\n");
-
- add_disk(cowdev->gd);
-
- up(&cowdevlock);
- return 0;
-}
-
-/*
-** close a cowdevice (pair of rdofile/cowfile) and release memory
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int
-cowlo_closepair(struct cowloop_device *cowdev)
-{
- int minor;
-
- down(&cowdevlock);
-
- /*
- ** if cowdevice is not activated at all, refuse
- */
- if ( !(cowdev->state & COWDEVOPEN) ) {
- up(&cowdevlock);
- return -ENODEV;
- }
-
- /*
- ** if this cowdevice is still open, refuse
- */
- if (cowdev->opencnt > 0) {
- up(&cowdevlock);
- return -EBUSY;
- }
-
- up(&cowdevlock);
-
- /*
- ** wakeup watcher (if any)
- */
- if (cowdev->state & COWWATCHDOG) {
- cowdev->watchthresh = cowdev->blkavail;
- wake_up_interruptible(&cowdev->watchq);
- }
-
- /*
- ** wakeup kernel-thread to be able to exit
- ** and wait until it has exited
- */
- cowdev->closedown = 1;
- cowdev->qfilled = 1;
- wake_up_interruptible(&cowdev->waitq);
-
- while (cowdev->pid)
- schedule();
-
- del_gendisk(cowdev->gd); /* revert the alloc_disk() */
- put_disk(cowdev->gd); /* revert the add_disk() */
-
- if (cowlo_procdir) {
- char tmpname[64];
-
- for (minor = 0; minor < maxcows; minor++) {
- if (cowdev == cowdevall[minor]) break;
- }
- sprintf(tmpname, "%d", minor);
-
- remove_proc_entry(tmpname, cowlo_procdir);
- }
-
- blk_cleanup_queue(cowdev->rqueue);
-
- /*
- ** release memory for filenames if these names have
- ** been allocated dynamically
- */
- if ( (cowdev->cowname) && (cowdev->cowname != cowfile))
- kfree(cowdev->cowname);
-
- if ( (cowdev->rdoname) && (cowdev->rdoname != rdofile))
- kfree(cowdev->rdoname);
-
- cowlo_undo_openrdo(cowdev);
- cowlo_undo_opencow(cowdev);
-
- cowdev->state &= ~COWDEVOPEN;
-
- return 0;
-}
-
-/*
-** open the read-only file
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int
-cowlo_openrdo(struct cowloop_device *cowdev, char *rdof)
-{
- struct file *f;
- struct inode *inode;
- long int i, nrval;
-
- DEBUGP(DCOW"cowloop - openrdo called\n");
-
- /*
- ** open the read-only file
- */
- if(*rdof == '\0') {
- printk(KERN_ERR
- "cowloop - specify name for read-only file\n\n");
- return -EINVAL;
- }
-
- f = filp_open(rdof, O_RDONLY|O_LARGEFILE, 0);
-
- if ( (f == NULL) || IS_ERR(f) ) {
- printk(KERN_ERR
- "cowloop - open of rdofile %s failed\n", rdof);
- return -EINVAL;
- }
-
- cowdev->rdofp = f;
-
- inode = f->f_dentry->d_inode;
-
- if ( !S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode) ) {
- printk(KERN_ERR
- "cowloop - %s not regular file or blockdev\n", rdof);
- return -EINVAL;
- }
-
- DEBUGP(DCOW"cowloop - determine size rdo....\n");
-
- /*
- ** determine block-size and total size of read-only file
- */
- if (S_ISREG(inode->i_mode)) {
- /*
- ** read-only file is a regular file
- */
- cowdev->blocksz = 512; /* other value fails */
- cowdev->numblocks = inode->i_size >> MUSHIFT;
-
- if (inode->i_size & MUMASK) {
- printk(KERN_WARNING
- "cowloop - rdofile %s truncated to multiple "
- "of %d bytes\n", rdof, MAPUNIT);
- }
-
- DEBUGP(DCOW"cowloop - RO=regular: numblocks=%d, blocksz=%d\n",
- cowdev->numblocks, cowdev->blocksz);
- } else {
- /*
- ** read-only file is a block device
- */
- cowdev->belowdev = inode->i_bdev;
- cowdev->belowgd = cowdev->belowdev->bd_disk; /* gendisk */
-
- if (cowdev->belowdev->bd_part) {
- cowdev->numblocks = cowdev->belowdev->bd_part->nr_sects
- / (MAPUNIT/512);
- }
-
- if (cowdev->belowgd) {
- cowdev->belowq = cowdev->belowgd->queue;
-
- if (cowdev->numblocks == 0) {
- cowdev->numblocks = get_capacity(cowdev->belowgd)
- / (MAPUNIT/512);
- }
- }
-
-
- if (cowdev->belowq)
- cowdev->blocksz = queue_logical_block_size(cowdev->belowq);
-
- if (cowdev->blocksz == 0)
- cowdev->blocksz = BLOCK_SIZE; /* default 2^10 */
-
- DEBUGP(DCOW"cowloop - numblocks=%d, "
- "blocksz=%d, belowgd=%p, belowq=%p\n",
- cowdev->numblocks, cowdev->blocksz,
- cowdev->belowgd, cowdev->belowq);
-
- DEBUGP(DCOW"cowloop - belowdev.bd_block_size=%d\n",
- cowdev->belowdev->bd_block_size);
- }
-
- if (cowdev->numblocks == 0) {
- printk(KERN_ERR "cowloop - %s has no contents\n", rdof);
- return -EINVAL;
- }
-
- /*
- ** reserve space in memory as generic I/O buffer
- */
- cowdev->iobuf = kmalloc(MAPUNIT, GFP_KERNEL);
-
- if (!cowdev->iobuf) {
- printk(KERN_ERR
- "cowloop - cannot get space for buffer %d\n", MAPUNIT);
- return -ENOMEM;
- }
-
- DEBUGP(DCOW"cowloop - determine fingerprint rdo....\n");
-
- /*
- ** determine fingerprint for read-only file
- ** calculate fingerprint from first four datablocks
- ** which do not contain binary zeroes
- */
- for (i=0, cowdev->fingerprint=0, nrval=0;
- (nrval < 4)&&(i < cowdev->numblocks); i++) {
- int j;
- unsigned char cs;
-
- /*
- ** read next block
- */
- if (cowlo_readrdo(cowdev, cowdev->iobuf, MAPUNIT,
- (loff_t)i << MUSHIFT) < 1)
- break;
-
- /*
- ** calculate fingerprint by adding all byte-values
- */
- for (j=0, cs=0; j < MAPUNIT; j++)
- cs += *(cowdev->iobuf+j);
-
- if (cs == 0) /* block probably contained zeroes */
- continue;
-
- /*
- ** shift byte-value to proper place in final fingerprint
- */
- cowdev->fingerprint |= cs << (nrval*8);
- nrval++;
- }
-
- return 0;
-}
-
-/*
-** undo memory allocs and file opens issued so far
-** related to the read-only file
-*/
-static void
-cowlo_undo_openrdo(struct cowloop_device *cowdev)
-{
- if(cowdev->iobuf);
- kfree(cowdev->iobuf);
-
- if (cowdev->rdofp)
- filp_close(cowdev->rdofp, 0);
-}
-
-/*
-** open the cowfile
-**
-** returns:
-** 0 - okay
-** < 0 - error value
-*/
-static int
-cowlo_opencow(struct cowloop_device *cowdev, char *cowf, int autorecover)
-{
- long int i, rv;
- int minor;
- unsigned long nb;
- struct file *f;
- struct inode *inode;
- loff_t offset;
- struct cowloop_device *cowtmp;
-
- DEBUGP(DCOW"cowloop - opencow called\n");
-
- /*
- ** open copy-on-write file (read-write)
- */
- if (cowf[0] == '\0') {
- printk(KERN_ERR
- "cowloop - specify name of copy-on-write file\n\n");
- return -EINVAL;
- }
-
- f = filp_open(cowf, O_RDWR|O_LARGEFILE, 0600);
-
- if ( (f == NULL) || IS_ERR(f) ) {
- /*
- ** non-existing cowfile: try to create
- */
- f = filp_open(cowf, O_RDWR|O_CREAT|O_LARGEFILE, 0600);
-
- if ( (f == NULL) || IS_ERR(f) ) {
- printk(KERN_ERR
- "cowloop - failed to open file %s for read-write\n\n",
- cowf);
- return -EINVAL;
- }
- }
-
- cowdev->cowfp = f;
-
- inode = f->f_dentry->d_inode;
-
- if (!S_ISREG(inode->i_mode)) {
- printk(KERN_ERR "cowloop - %s is not regular file\n", cowf);
- return -EINVAL;
- }
-
- /*
- ** check if this cowfile is already in use for another cowdevice
- */
- for (minor = 0; minor < maxcows; minor++) {
-
- cowtmp = cowdevall[minor];
-
- if ( !(cowtmp->state & COWDEVOPEN) )
- continue;
-
- if (cowtmp == cowdev)
- continue;
-
- if (cowtmp->cowfp->f_dentry->d_inode == f->f_dentry->d_inode) {
- printk(KERN_ERR
- "cowloop - %s: already in use as cow\n", cowf);
- return -EBUSY;
- }
- }
-
- /*
- ** mark cowfile open for read-write
- */
- cowdev->state |= COWRWCOWOPEN;
-
- /*
- ** calculate size (in bytes) for total bitmap in cowfile;
- ** when the size of the cowhead block is added, the start-offset
- ** for the modified data blocks can be found
- */
- nb = cowdev->numblocks;
-
- if (nb%8) /* transform #bits to #bytes */
- nb+=8; /* rounded if necessary */
- nb /= 8;
-
- if (nb & MUMASK) /* round up #bytes to MAPUNIT chunks */
- cowdev->mapsize = ( (nb>>MUSHIFT) +1) << MUSHIFT;
- else
- cowdev->mapsize = nb;
-
- /*
- ** reserve space in memory for the cowhead
- */
- cowdev->cowhead = kmalloc(MAPUNIT, GFP_KERNEL);
-
- if (!cowdev->cowhead) {
- printk(KERN_ERR "cowloop - cannot get space for cowhead %d\n",
- MAPUNIT);
- return -ENOMEM;
- }
-
- memset(cowdev->cowhead, 0, MAPUNIT);
-
- DEBUGP(DCOW"cowloop - prepare cowhead....\n");
-
- /*
- ** check if the cowfile exists or should be created
- */
- if (inode->i_size != 0) {
- /*
- ** existing cowfile: read the cow head
- */
- if (inode->i_size < MAPUNIT) {
- printk(KERN_ERR
- "cowloop - existing cowfile %s too small\n",
- cowf);
- return -EINVAL;
- }
-
- cowlo_readcowraw(cowdev, cowdev->cowhead, MAPUNIT, (loff_t) 0);
-
- /*
- ** verify if the existing file is really a cowfile
- */
- if (cowdev->cowhead->magic != COWMAGIC) {
- printk(KERN_ERR
- "cowloop - cowfile %s has incorrect format\n",
- cowf);
- return -EINVAL;
- }
-
- /*
- ** verify the cowhead version of the cowfile
- */
- if (cowdev->cowhead->version > COWVERSION) {
- printk(KERN_ERR
- "cowloop - cowfile %s newer than this driver\n",
- cowf);
- return -EINVAL;
- }
-
- /*
- ** make sure that this is not a packed cowfile
- */
- if (cowdev->cowhead->flags & COWPACKED) {
- printk(KERN_ERR
- "cowloop - packed cowfile %s not accepted\n", cowf);
- return -EINVAL;
- }
-
- /*
- ** verify if the cowfile has been properly closed
- */
- if (cowdev->cowhead->flags & COWDIRTY) {
- /*
- ** cowfile was not properly closed;
- ** check if automatic recovery is required
- ** (actual recovery will be done later on)
- */
- if (!autorecover) {
- printk(KERN_ERR
- "cowloop - cowfile %s is dirty "
- "(not properly closed by rmmod?)\n",
- cowf);
- printk(KERN_ERR
- "cowloop - run cowrepair or specify "
- "'option=r' to recover\n");
- return -EINVAL;
- }
- }
-
- /*
- ** verify if the cowfile is really related to this rdofile
- */
- if (cowdev->cowhead->rdoblocks != cowdev->numblocks) {
- printk(KERN_ERR
- "cowloop - cowfile %s (size %lld) not related "
- "to rdofile (size %lld)\n",
- cowf,
- (long long)cowdev->cowhead->rdoblocks <<MUSHIFT,
- (long long)cowdev->numblocks <<MUSHIFT);
- return -EINVAL;
- }
-
- if (cowdev->cowhead->rdofingerprint != cowdev->fingerprint) {
- printk(KERN_ERR
- "cowloop - cowfile %s not related to rdofile "
- " (fingerprint err - rdofile modified?)\n", cowf);
- return -EINVAL;
- }
- } else {
- /*
- ** new cowfile: determine the minimal size (cowhead+bitmap)
- */
- offset = (loff_t) MAPUNIT + cowdev->mapsize - 1;
-
- if ( cowlo_writecowraw(cowdev, "", 1, offset) < 1) {
- printk(KERN_ERR
- "cowloop - cannot set cowfile to size %lld\n",
- offset+1);
- return -EINVAL;
- }
-
- /*
- ** prepare new cowhead
- */
- cowdev->cowhead->magic = COWMAGIC;
- cowdev->cowhead->version = COWVERSION;
- cowdev->cowhead->mapunit = MAPUNIT;
- cowdev->cowhead->mapsize = cowdev->mapsize;
- cowdev->cowhead->rdoblocks = cowdev->numblocks;
- cowdev->cowhead->rdofingerprint = cowdev->fingerprint;
- cowdev->cowhead->cowused = 0;
-
- /*
- ** calculate start offset of data in cowfile,
- ** rounded up to multiple of 4K to avoid
- ** unnecessary disk-usage for written datablocks in
- ** the sparsed cowfile on e.g. 4K filesystems
- */
- cowdev->cowhead->doffset =
- ((MAPUNIT+cowdev->mapsize+4095)>>12)<<12;
- }
-
- cowdev->cowhead->flags = 0;
-
- DEBUGP(DCOW"cowloop - reserve space bitmap....\n");
-
- /*
- ** reserve space in memory for the entire bitmap and
- ** fill it with the bitmap-data from disk; the entire
- ** bitmap is allocated in several chunks because kmalloc
- ** has restrictions regarding the allowed size per kmalloc
- */
- cowdev->mapcount = (cowdev->mapsize+MAPCHUNKSZ-1)/MAPCHUNKSZ;
-
- /*
- ** the size of every bitmap chunk will be MAPCHUNKSZ bytes, except for
- ** the last bitmap chunk: calculate remaining size for this chunk
- */
- if (cowdev->mapsize % MAPCHUNKSZ == 0)
- cowdev->mapremain = MAPCHUNKSZ;
- else
- cowdev->mapremain = cowdev->mapsize % MAPCHUNKSZ;
-
- /*
- ** allocate space to store all pointers for the bitmap-chunks
- ** (initialize area with zeroes to allow proper undo)
- */
- cowdev->mapcache = kmalloc(cowdev->mapcount * sizeof(char *),
- GFP_KERNEL);
- if (!cowdev->mapcache) {
- printk(KERN_ERR
- "cowloop - can not allocate space for bitmap ptrs\n");
- return -ENOMEM;
- }
-
- memset(cowdev->mapcache, 0, cowdev->mapcount * sizeof(char *));
-
- /*
- ** allocate space to store the bitmap-chunks themselves
- */
- for (i=0; i < cowdev->mapcount; i++) {
- if (i < (cowdev->mapcount-1))
- *(cowdev->mapcache+i) = kmalloc(MAPCHUNKSZ, GFP_KERNEL);
- else
- *(cowdev->mapcache+i) = kmalloc(cowdev->mapremain,
- GFP_KERNEL);
-
- if (*(cowdev->mapcache+i) == NULL) {
- printk(KERN_ERR "cowloop - no space for bitmapchunk %ld"
- " totmapsz=%ld, mapcnt=%d mapunit=%d\n",
- i, cowdev->mapsize, cowdev->mapcount,
- MAPUNIT);
- return -ENOMEM;
- }
- }
-
- DEBUGP(DCOW"cowloop - read bitmap from cow....\n");
-
- /*
- ** read the entire bitmap from the cowfile into the in-memory cache;
- ** count the number of blocks that are in use already
- ** (statistical purposes)
- */
- for (i=0, offset=MAPUNIT; i < cowdev->mapcount;
- i++, offset+=MAPCHUNKSZ) {
- unsigned long numbytes;
-
- if (i < (cowdev->mapcount-1))
- /*
- ** full bitmap chunk
- */
- numbytes = MAPCHUNKSZ;
- else
- /*
- ** last bitmap chunk: might be partly filled
- */
- numbytes = cowdev->mapremain;
-
- cowlo_readcowraw(cowdev, *(cowdev->mapcache+i),
- numbytes, offset);
- }
-
- /*
- ** if the cowfile was dirty and automatic recovery is required,
- ** reconstruct a proper bitmap in memory now
- */
- if (cowdev->cowhead->flags & COWDIRTY) {
- unsigned long long blocknum;
- char databuf[MAPUNIT];
- unsigned long mapnum, mapbyte, mapbit;
-
- printk(KERN_NOTICE "cowloop - recover dirty cowfile %s....\n",
- cowf);
-
- /*
- ** read all data blocks
- */
- for (blocknum=0, rv=1, offset=0;
- cowlo_readcow(cowdev, databuf, MAPUNIT, offset) > 0;
- blocknum++, offset += MAPUNIT) {
-
- /*
- ** if this datablock contains real data (not binary
- ** zeroes), set the corresponding bit in the bitmap
- */
- if ( memcmp(databuf, allzeroes, MAPUNIT) == 0)
- continue;
-
- mapnum = CALCMAP (blocknum);
- mapbyte = CALCBYTE(blocknum);
- mapbit = CALCBIT (blocknum);
-
- *(*(cowdev->mapcache+mapnum)+mapbyte) |= (1<<mapbit);
- }
-
- printk(KERN_NOTICE "cowloop - cowfile recovery completed\n");
- }
-
- /*
- ** count all bits set in the bitmaps for statistical purposes
- */
- for (i=0, cowdev->nrcowblocks = 0; i < cowdev->mapcount; i++) {
- long numbytes;
- char *p;
-
- if (i < (cowdev->mapcount-1))
- numbytes = MAPCHUNKSZ;
- else
- numbytes = cowdev->mapremain;
-
- p = *(cowdev->mapcache+i);
-
- for (numbytes--; numbytes >= 0; numbytes--, p++) {
- /*
- ** for only eight checks the following construction
- ** is faster than a loop-construction
- */
- if ((*p) & 0x01) cowdev->nrcowblocks++;
- if ((*p) & 0x02) cowdev->nrcowblocks++;
- if ((*p) & 0x04) cowdev->nrcowblocks++;
- if ((*p) & 0x08) cowdev->nrcowblocks++;
- if ((*p) & 0x10) cowdev->nrcowblocks++;
- if ((*p) & 0x20) cowdev->nrcowblocks++;
- if ((*p) & 0x40) cowdev->nrcowblocks++;
- if ((*p) & 0x80) cowdev->nrcowblocks++;
- }
- }
-
- /*
- ** consistency-check for number of bits set in bitmap
- */
- if ( !(cowdev->cowhead->flags & COWDIRTY) &&
- (cowdev->cowhead->cowused != cowdev->nrcowblocks) ) {
- printk(KERN_ERR "cowloop - inconsistent cowfile admi\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-/*
-** undo memory allocs and file opens issued so far
-** related to the cowfile
-*/
-static void
-cowlo_undo_opencow(struct cowloop_device *cowdev)
-{
- int i;
-
- if (cowdev->mapcache) {
- for (i=0; i < cowdev->mapcount; i++) {
- if (*(cowdev->mapcache+i) != NULL)
- kfree( *(cowdev->mapcache+i) );
- }
-
- kfree(cowdev->mapcache);
- }
-
- if (cowdev->cowhead)
- kfree(cowdev->cowhead);
-
- if ( (cowdev->state & COWCOWOPEN) && (cowdev->cowfp) )
- filp_close(cowdev->cowfp, 0);
-
- /*
- ** mark cowfile closed
- */
- cowdev->state &= ~COWCOWOPEN;
-}
-
-/*
-** flush the entire bitmap and the cowhead (clean) to the cowfile
-**
-** must be called with the cowdevices-lock set
-*/
-static void
-cowlo_sync(void)
-{
- int i, minor;
- loff_t offset;
- struct cowloop_device *cowdev;
-
- for (minor=0; minor < maxcows; minor++) {
- cowdev = cowdevall[minor];
- if ( ! (cowdev->state & COWRWCOWOPEN) )
- continue;
-
- for (i=0, offset=MAPUNIT; i < cowdev->mapcount;
- i++, offset += MAPCHUNKSZ) {
- unsigned long numbytes;
-
- if (i < (cowdev->mapcount-1))
- /*
- ** full bitmap chunk
- */
- numbytes = MAPCHUNKSZ;
- else
- /*
- ** last bitmap chunk: might be partly filled
- */
- numbytes = cowdev->mapremain;
-
- DEBUGP(DCOW
- "cowloop - flushing bitmap %2d (%3ld Kb)\n",
- i, numbytes/1024);
-
- if (cowlo_writecowraw(cowdev, *(cowdev->mapcache+i),
- numbytes, offset) < numbytes) {
- break;
- }
- }
-
- /*
- ** flush clean up-to-date cowhead to cowfile
- */
- cowdev->cowhead->cowused = cowdev->nrcowblocks;
- cowdev->cowhead->flags &= ~COWDIRTY;
-
- DEBUGP(DCOW "cowloop - flushing cowhead (%3d Kb)\n",
- MAPUNIT/1024);
-
- cowlo_writecowraw(cowdev, cowdev->cowhead, MAPUNIT, (loff_t) 0);
- }
-}
-
-/*****************************************************************************/
-/* Module loading/unloading */
-/*****************************************************************************/
-
-/*
-** called during insmod/modprobe
-*/
-static int __init
-cowlo_init_module(void)
-{
- int rv;
- int minor, uptocows;
-
- revision[sizeof revision - 3] = '\0';
-
- printk(KERN_NOTICE "cowloop - (C) 2009 ATComputing.nl - version: %s\n", &revision[11]);
- printk(KERN_NOTICE "cowloop - info: www.ATComputing.nl/cowloop\n");
-
- memset(allzeroes, 0, MAPUNIT);
-
- /*
- ** Setup administration for all possible cowdevices.
- ** Note that their minor numbers go from 0 to MAXCOWS-1 inclusive
- ** and minor == MAXCOWS-1 is reserved for the control device.
- */
- if ((maxcows < 1) || (maxcows > MAXCOWS)) {
- printk(KERN_WARNING
- "cowloop - maxcows exceeds maximum of %d\n", MAXCOWS);
-
- maxcows = DFLCOWS;
- }
-
- /* allocate room for a table with a pointer to each cowloop_device: */
- if ( (cowdevall = kmalloc(maxcows * sizeof(struct cowloop_device *),
- GFP_KERNEL)) == NULL) {
- printk(KERN_WARNING
- "cowloop - can not alloc table for %d devs\n", maxcows);
- uptocows = 0;
- rv = -ENOMEM;
- goto error_out;
- }
- memset(cowdevall, 0, maxcows * sizeof(struct cowloop_device *));
- /* then hook an actual cowloop_device struct to each pointer: */
- for (minor=0; minor < maxcows; minor++) {
- if ((cowdevall[minor] = kmalloc(sizeof(struct cowloop_device),
- GFP_KERNEL)) == NULL) {
- printk(KERN_WARNING
- "cowloop - can not alloc admin-struct for dev no %d\n", minor);
-
- uptocows = minor; /* this is how far we got.... */
- rv = -ENOMEM;
- goto error_out;
- }
- memset(cowdevall[minor], 0, sizeof(struct cowloop_device));
- }
- uptocows = maxcows; /* we got all devices */
-
- sema_init(&cowdevlock, 1);
-
- /*
- ** register cowloop module
- */
- if ( register_blkdev(COWMAJOR, DEVICE_NAME) < 0) {
- printk(KERN_WARNING
- "cowloop - unable to get major %d for cowloop\n", COWMAJOR);
- rv = -EIO;
- goto error_out;
- }
-
- /*
- ** create a directory below /proc to allocate a file
- ** for each cowdevice that is allocated later on
- */
- cowlo_procdir = proc_mkdir("cow", NULL);
-
- /*
- ** check if a cowdevice has to be opened during insmod/modprobe;
- ** two parameters should be specified then: rdofile= and cowfile=
- */
- if( (rdofile[0] != '\0') && (cowfile[0] != '\0') ) {
- char *po = option;
- int wantrecover = 0;
-
- /*
- ** check if automatic recovery is wanted
- */
- while (*po) {
- if (*po == 'r') {
- wantrecover = 1;
- break;
- }
- po++;
- }
-
- /*
- ** open new cowdevice with minor number 0
- */
- if ( (rv = cowlo_openpair(rdofile, cowfile, wantrecover, 0))) {
- remove_proc_entry("cow", NULL);
- unregister_blkdev(COWMAJOR, DEVICE_NAME);
- goto error_out;
- }
- } else {
- /*
- ** check if only one parameter has been specified
- */
- if( (rdofile[0] != '\0') || (cowfile[0] != '\0') ) {
- printk(KERN_ERR
- "cowloop - only one filename specified\n");
- remove_proc_entry("cow", NULL);
- unregister_blkdev(COWMAJOR, DEVICE_NAME);
- rv = -EINVAL;
- goto error_out;
- }
- }
-
- /*
- ** allocate fake disk as control channel to handle the requests
- ** to activate and deactivate cowdevices dynamically
- */
- if (!(cowctlgd = alloc_disk(1))) {
- printk(KERN_WARNING
- "cowloop - unable to alloc_disk for cowctl\n");
-
- remove_proc_entry("cow", NULL);
- (void) cowlo_closepair(cowdevall[0]);
- unregister_blkdev(COWMAJOR, DEVICE_NAME);
- rv = -ENOMEM;
- goto error_out;
- }
-
- spin_lock_init(&cowctlrqlock);
- cowctlgd->major = COWMAJOR;
- cowctlgd->first_minor = COWCTL;
- cowctlgd->minors = 1;
- cowctlgd->fops = &cowlo_fops;
- cowctlgd->private_data = NULL;
- /* the device has capacity 0, so there will be no q-requests */
- cowctlgd->queue = blk_init_queue(NULL, &cowctlrqlock);
- sprintf(cowctlgd->disk_name, "cowctl");
- set_capacity(cowctlgd, 0);
-
- add_disk(cowctlgd);
-
- printk(KERN_NOTICE "cowloop - number of configured cowdevices: %d\n",
- maxcows);
- if (rdofile[0] != '\0') {
- printk(KERN_NOTICE "cowloop - initialized on rdofile=%s\n",
- rdofile);
- } else {
- printk(KERN_NOTICE "cowloop - initialized without rdofile yet\n");
- }
- return 0;
-
-error_out:
- for (minor=0; minor < uptocows ; minor++) {
- kfree(cowdevall[minor]);
- }
- kfree(cowdevall);
- return rv;
-}
-
-/*
-** called during rmmod
-*/
-static void __exit
-cowlo_cleanup_module(void)
-{
- int minor;
-
- /*
- ** flush bitmaps and cowheads to the cowfiles
- */
- down(&cowdevlock);
- cowlo_sync();
- up(&cowdevlock);
-
- /*
- ** close all cowdevices
- */
- for (minor=0; minor < maxcows; minor++)
- (void) cowlo_closepair(cowdevall[minor]);
-
- unregister_blkdev(COWMAJOR, DEVICE_NAME);
-
- /*
- ** get rid of /proc/cow and unregister the driver
- */
- remove_proc_entry("cow", NULL);
-
- for (minor = 0; minor < maxcows; minor++) {
- kfree(cowdevall[minor]);
- }
- kfree(cowdevall);
-
- del_gendisk(cowctlgd); /* revert the alloc_disk() */
- put_disk (cowctlgd); /* revert the add_disk() */
- blk_cleanup_queue(cowctlgd->queue); /* cleanup the empty queue */
-
- printk(KERN_NOTICE "cowloop - unloaded\n");
-}
-
-module_init(cowlo_init_module);
-module_exit(cowlo_cleanup_module);
+++ /dev/null
-/*
-** DO NOT MODIFY THESE VALUES (would make old cowfiles unusable)
-*/
-#define MAPUNIT 1024 /* blocksize for bit in bitmap */
-#define MUSHIFT 10 /* bitshift for bit in bitmap */
-#define MUMASK 0x3ff /* bitmask for bit in bitmap */
-
-#define COWMAGIC 0x574f437f /* byte-swapped '7f C O W' */
-#define COWDIRTY 0x01
-#define COWPACKED 0x02
-#define COWVERSION 1
-
-struct cowhead
-{
- int magic; /* identifies a cowfile */
- short version; /* version of cowhead */
- short flags; /* flags indicating status */
- unsigned long mapunit; /* blocksize per bit in bitmap */
- unsigned long mapsize; /* total size of bitmap (bytes) */
- unsigned long doffset; /* start-offset datablocks in cow */
- unsigned long rdoblocks; /* size of related read-only file */
- unsigned long rdofingerprint; /* fingerprint of read-only file */
- unsigned long cowused; /* number of datablocks used in cow */
-};
-
-#define COWDEVDIR "/dev/cow/"
-#define COWDEVICE COWDEVDIR "%ld"
-#define COWCONTROL COWDEVDIR "ctl"
-
-#define MAXCOWS 1024
-#define COWCTL (MAXCOWS-1) /* minor number of /dev/cow/ctl */
-
-#define COWPROCDIR "/proc/cow/"
-#define COWPROCFILE COWPROCDIR "%d"
-
-/*
-** ioctl related stuff
-*/
-#define ANYDEV ((unsigned long)-1)
-
-struct cowpair
-{
- unsigned char *rdofile; /* pathname of the rdofile */
- unsigned char *cowfile; /* pathname of the cowfile */
- unsigned short rdoflen; /* length of rdofile pathname */
- unsigned short cowflen; /* length of cowfile pathname */
- unsigned long device; /* requested/returned device number */
-};
-
-struct cowwatch
-{
- int flags; /* request flags */
- unsigned long device; /* requested device number */
- unsigned long threshold; /* continue if free Kb < threshold */
- unsigned long totalkb; /* ret: total filesystem size (Kb) */
- unsigned long availkb; /* ret: free filesystem size (Kb) */
-};
-
-#define WATCHWAIT 0x01 /* block until threshold reached */
-
-#define COWSYNC _IO ('C', 1)
-#define COWMKPAIR _IOW ('C', 2, struct cowpair)
-#define COWRMPAIR _IOW ('C', 3, unsigned long)
-#define COWWATCH _IOW ('C', 4, struct cowwatch)
-#define COWCLOSE _IOW ('C', 5, unsigned long)
-#define COWRDOPEN _IOW ('C', 6, unsigned long)
+++ /dev/null
-config USB_CPC
- tristate "CPC CAN USB driver"
- depends on USB && PROC_FS
- default n
+++ /dev/null
-obj-$(CONFIG_USB_CPC) += cpc-usb.o
-
-cpc-usb-y := cpc-usb_drv.o sja2m16c_2.o
+++ /dev/null
-Things to do for this driver to get merged into the main portion of the
-kernel:
- - checkpatch cleanups
- - sparse clean
- - remove proc code
- - tie into CAN socket interfaces if possible
- - figure out sane userspace api
- - use linux's error codes
-
-Send patches to Greg Kroah-Hartman <greg@kroah.com>
+++ /dev/null
-/*
- * CPC-USB CAN Interface Kernel Driver
- *
- * Copyright (C) 2004-2009 EMS Dr. Thomas Wuensche
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published
- * by the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <asm/uaccess.h>
-#include <linux/usb.h>
-
-
-#include <linux/proc_fs.h>
-
-#include "cpc.h"
-
-#include "cpc_int.h"
-#include "cpcusb.h"
-
-#include "sja2m16c.h"
-
-/* Version Information */
-#define DRIVER_AUTHOR "Sebastian Haas <haas@ems-wuensche.com>"
-#define DRIVER_DESC "CPC-USB Driver for Linux Kernel 2.6"
-#define DRIVER_VERSION CPC_DRIVER_VERSION
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
-
-/* Define these values to match your devices */
-#define USB_CPCUSB_VENDOR_ID 0x12D6
-
-#define USB_CPCUSB_M16C_PRODUCT_ID 0x0888
-#define USB_CPCUSB_LPC2119_PRODUCT_ID 0x0444
-
-#define CPC_USB_PROC_DIR CPC_PROC_DIR "cpc-usb"
-
-static struct proc_dir_entry *procDir;
-static struct proc_dir_entry *procEntry;
-
-/* Module parameters */
-static int debug;
-module_param(debug, int, S_IRUGO);
-
-/* table of devices that work with this driver */
-static struct usb_device_id cpcusb_table[] = {
- {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_M16C_PRODUCT_ID)},
- {USB_DEVICE(USB_CPCUSB_VENDOR_ID, USB_CPCUSB_LPC2119_PRODUCT_ID)},
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, cpcusb_table);
-
-/* use to prevent kernel panic if driver is unloaded
- * while a programm has still open the device
- */
-DECLARE_WAIT_QUEUE_HEAD(rmmodWq);
-atomic_t useCount;
-
-static CPC_USB_T *CPCUSB_Table[CPC_USB_CARD_CNT] = { 0 };
-static unsigned int CPCUsbCnt;
-
-/* prevent races between open() and disconnect() */
-static DECLARE_MUTEX(disconnect_sem);
-
-/* local function prototypes */
-static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count,
- loff_t *ppos);
-static ssize_t cpcusb_write(struct file *file, const char *buffer,
- size_t count, loff_t *ppos);
-static unsigned int cpcusb_poll(struct file *file, poll_table * wait);
-static int cpcusb_open(struct inode *inode, struct file *file);
-static int cpcusb_release(struct inode *inode, struct file *file);
-
-static int cpcusb_probe(struct usb_interface *interface,
- const struct usb_device_id *id);
-static void cpcusb_disconnect(struct usb_interface *interface);
-
-static void cpcusb_read_bulk_callback(struct urb *urb);
-static void cpcusb_write_bulk_callback(struct urb *urb);
-static void cpcusb_read_interrupt_callback(struct urb *urb);
-
-static int cpcusb_setup_intrep(CPC_USB_T *card);
-
-static struct file_operations cpcusb_fops = {
- /*
- * The owner field is part of the module-locking
- * mechanism. The idea is that the kernel knows
- * which module to increment the use-counter of
- * BEFORE it calls the device's open() function.
- * This also means that the kernel can decrement
- * the use-counter again before calling release()
- * or should the open() function fail.
- */
- .owner = THIS_MODULE,
-
- .read = cpcusb_read,
- .write = cpcusb_write,
- .poll = cpcusb_poll,
- .open = cpcusb_open,
- .release = cpcusb_release,
-};
-
-/*
- * usb class driver info in order to get a minor number from the usb core,
- * and to have the device registered with devfs and the driver core
- */
-static struct usb_class_driver cpcusb_class = {
- .name = "usb/cpc_usb%d",
- .fops = &cpcusb_fops,
- .minor_base = CPC_USB_BASE_MNR,
-};
-
-/* usb specific object needed to register this driver with the usb subsystem */
-static struct usb_driver cpcusb_driver = {
- .name = "cpc-usb",
- .probe = cpcusb_probe,
- .disconnect = cpcusb_disconnect,
- .id_table = cpcusb_table,
-};
-
-static int cpcusb_create_info_output(char *buf)
-{
- int i = 0, j;
-
- for (j = 0; j < CPC_USB_CARD_CNT; j++) {
- if (CPCUSB_Table[j]) {
- CPC_USB_T *card = CPCUSB_Table[j];
- CPC_CHAN_T *chan = card->chan;
-
- /* MINOR CHANNELNO BUSNO SLOTNO */
- i += sprintf(&buf[i], "%d %s\n", chan->minor,
- card->serialNumber);
- }
- }
-
- return i;
-}
-
-static int cpcusb_proc_read_info(char *page, char **start, off_t off,
- int count, int *eof, void *data)
-{
- int len = cpcusb_create_info_output(page);
-
- if (len <= off + count)
- *eof = 1;
- *start = page + off;
- len -= off;
- if (len > count)
- len = count;
- if (len < 0)
- len = 0;
-
- return len;
-}
-
-/*
- * Remove CPC-USB and cleanup
- */
-static inline void cpcusb_delete(CPC_USB_T *card)
-{
- if (card) {
- if (card->chan) {
- if (card->chan->buf)
- vfree(card->chan->buf);
-
- if (card->chan->CPCWait_q)
- kfree(card->chan->CPCWait_q);
-
- kfree(card->chan);
- }
-
- CPCUSB_Table[card->idx] = NULL;
- kfree(card);
- }
-}
-
-/*
- * setup the interrupt IN endpoint of a specific CPC-USB device
- */
-static int cpcusb_setup_intrep(CPC_USB_T *card)
-{
- int retval = 0;
- struct usb_endpoint_descriptor *ep;
-
- ep = &card->interface->altsetting[0].endpoint[card->num_intr_in].desc;
-
- card->intr_in_buffer[0] = 0;
- card->free_slots = 15; /* initial size */
-
- /* setup the urb */
- usb_fill_int_urb(card->intr_in_urb, card->udev,
- usb_rcvintpipe(card->udev, card->num_intr_in),
- card->intr_in_buffer,
- sizeof(card->intr_in_buffer),
- cpcusb_read_interrupt_callback,
- card,
- ep->bInterval);
-
- card->intr_in_urb->status = 0; /* needed! */
-
- /* submit the urb */
- retval = usb_submit_urb(card->intr_in_urb, GFP_KERNEL);
-
- if (retval)
- err("%s - failed submitting intr urb, error %d", __func__,
- retval);
-
- return retval;
-}
-
-static int cpcusb_open(struct inode *inode, struct file *file)
-{
- CPC_USB_T *card = NULL;
- struct usb_interface *interface;
- int subminor;
- int j, retval = 0;
-
- subminor = iminor(inode);
-
- /* prevent disconnects */
- down(&disconnect_sem);
-
- interface = usb_find_interface(&cpcusb_driver, subminor);
- if (!interface) {
- err("%s - error, can't find device for minor %d",
- __func__, subminor);
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_no_device;
- }
-
- card = usb_get_intfdata(interface);
- if (!card) {
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_no_device;
- }
-
- /* lock this device */
- down(&card->sem);
-
- /* increment our usage count for the driver */
- if (card->open) {
- dbg("device already opened");
- retval = CPC_ERR_CHANNEL_ALREADY_OPEN;
- goto exit_on_error;
- }
-
- /* save our object in the file's private structure */
- file->private_data = card;
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_fill_bulk_urb(card->urbs[j].urb, card->udev,
- usb_rcvbulkpipe(card->udev, card->num_bulk_in),
- card->urbs[j].buffer, card->urbs[j].size,
- cpcusb_read_bulk_callback, card);
-
- retval = usb_submit_urb(card->urbs[j].urb, GFP_KERNEL);
-
- if (retval) {
- err("%s - failed submitting read urb, error %d",
- __func__, retval);
- retval = CPC_ERR_TRANSMISSION_FAILED;
- goto exit_on_error;
- }
- }
-
- info("%s - %d URB's submitted", __func__, j);
-
- ResetBuffer(card->chan);
-
- cpcusb_setup_intrep(card);
- card->open = 1;
-
- atomic_inc(&useCount);
-
-exit_on_error:
- /* unlock this device */
- up(&card->sem);
-
-exit_no_device:
- up(&disconnect_sem);
-
- return retval;
-}
-
-static unsigned int cpcusb_poll(struct file *file, poll_table * wait)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- unsigned int retval = 0;
-
- if (!card) {
- err("%s - device object lost", __func__);
- return -EIO;
- }
-
- poll_wait(file, card->chan->CPCWait_q, wait);
-
- if (IsBufferNotEmpty(card->chan) || !(card->present))
- retval |= (POLLIN | POLLRDNORM);
-
- if (card->free_slots)
- retval |= (POLLOUT | POLLWRNORM);
-
- return retval;
-}
-
-static int cpcusb_release(struct inode *inode, struct file *file)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- int j, retval = 0;
-
- if (card == NULL) {
- dbg("%s - object is NULL", __func__);
- return CPC_ERR_NO_INTERFACE_PRESENT;
- }
-
- /* lock our device */
- down(&card->sem);
-
- if (!card->open) {
- dbg("%s - device not opened", __func__);
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit_not_opened;
- }
-
- /* if device wasn't unplugged kill all urbs */
- if (card->present) {
- /* kill read urbs */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_kill_urb(card->urbs[j].urb);
- }
-
- /* kill irq urb */
- usb_kill_urb(card->intr_in_urb);
-
- /* kill write urbs */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (atomic_read(&card->wrUrbs[j].busy)) {
- usb_kill_urb(card->wrUrbs[j].urb);
- wait_for_completion(&card->wrUrbs[j].finished);
- }
- }
- }
-
- atomic_dec(&useCount);
-
- /* last process detached */
- if (atomic_read(&useCount) == 0) {
- wake_up(&rmmodWq);
- }
-
- if (!card->present && card->open) {
- /* the device was unplugged before the file was released */
- up(&card->sem);
- cpcusb_delete(card);
- return 0;
- }
-
- card->open = 0;
-
-exit_not_opened:
- up(&card->sem);
-
- return 0;
-}
-
-static ssize_t cpcusb_read(struct file *file, char *buffer, size_t count,
- loff_t *ppos)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- CPC_CHAN_T *chan;
- int retval = 0;
-
- if (count < sizeof(CPC_MSG_T))
- return CPC_ERR_UNKNOWN;
-
- /* check if can read from the given address */
- if (!access_ok(VERIFY_WRITE, buffer, count))
- return CPC_ERR_UNKNOWN;
-
- /* lock this object */
- down(&card->sem);
-
- /* verify that the device wasn't unplugged */
- if (!card->present) {
- up(&card->sem);
- return CPC_ERR_NO_INTERFACE_PRESENT;
- }
-
- if (IsBufferEmpty(card->chan)) {
- retval = 0;
- } else {
- chan = card->chan;
-
-#if 0
- /* convert LPC2119 params back to SJA1000 params */
- if (card->deviceRevision >= 0x0200
- && chan->buf[chan->oidx].type == CPC_MSG_T_CAN_PRMS) {
- LPC2119_TO_SJA1000_Params(&chan->buf[chan->oidx]);
- }
-#endif
-
- if (copy_to_user(buffer, &chan->buf[chan->oidx], count) != 0) {
- retval = CPC_ERR_IO_TRANSFER;
- } else {
- chan->oidx = (chan->oidx + 1) % CPC_MSG_BUF_CNT;
- chan->WnR = 1;
- retval = sizeof(CPC_MSG_T);
- }
- }
-/* spin_unlock_irqrestore(&card->slock, flags); */
-
- /* unlock the device */
- up(&card->sem);
-
- return retval;
-}
-
-#define SHIFT 1
-static inline void cpcusb_align_buffer_alignment(unsigned char *buf)
-{
- /* CPC-USB uploads packed bytes. */
- CPC_MSG_T *cpc = (CPC_MSG_T *) buf;
- unsigned int i;
-
- for (i = 0; i < cpc->length + (2 * sizeof(unsigned long)); i++) {
- ((unsigned char *) &cpc->msgid)[1 + i] =
- ((unsigned char *) &cpc->msgid)[1 + SHIFT + i];
- }
-}
-
-static int cpc_get_buffer_count(CPC_CHAN_T *chan)
-{
- /* check the buffer parameters */
- if (chan->iidx == chan->oidx)
- return !chan->WnR ? CPC_MSG_BUF_CNT : 0;
- else if (chan->iidx >= chan->oidx)
- return (chan->iidx - chan->oidx) % CPC_MSG_BUF_CNT;
-
- return (chan->iidx + CPC_MSG_BUF_CNT - chan->oidx) % CPC_MSG_BUF_CNT;
-}
-
-static ssize_t cpcusb_write(struct file *file, const char *buffer,
- size_t count, loff_t *ppos)
-{
- CPC_USB_T *card = (CPC_USB_T *) file->private_data;
- CPC_USB_WRITE_URB_T *wrUrb = NULL;
-
- ssize_t bytes_written = 0;
- int retval = 0;
- int j;
-
- unsigned char *obuf = NULL;
- unsigned char type = 0;
- CPC_MSG_T *info = NULL;
-
- dbg("%s - entered minor %d, count = %zu, present = %d",
- __func__, card->minor, count, card->present);
-
- if (count > sizeof(CPC_MSG_T))
- return CPC_ERR_UNKNOWN;
-
- /* check if can read from the given address */
- if (!access_ok(VERIFY_READ, buffer, count))
- return CPC_ERR_UNKNOWN;
-
- /* lock this object */
- down(&card->sem);
-
- /* verify that the device wasn't unplugged */
- if (!card->present) {
- retval = CPC_ERR_NO_INTERFACE_PRESENT;
- goto exit;
- }
-
- /* verify that we actually have some data to write */
- if (count == 0) {
- dbg("%s - write request of 0 bytes", __func__);
- goto exit;
- }
-
- if (card->free_slots <= 5) {
- info = (CPC_MSG_T *) buffer;
-
- if (info->type != CPC_CMD_T_CLEAR_CMD_QUEUE
- || card->free_slots <= 0) {
- dbg("%s - send buffer full please try again %d",
- __func__, card->free_slots);
- retval = CPC_ERR_CAN_NO_TRANSMIT_BUF;
- goto exit;
- }
- }
-
- /* Find a free write urb */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (!atomic_read(&card->wrUrbs[j].busy)) {
- wrUrb = &card->wrUrbs[j]; /* remember found URB */
- atomic_set(&wrUrb->busy, 1); /* lock this URB */
- init_completion(&wrUrb->finished); /* init completion */
- dbg("WR URB no. %d started", j);
- break;
- }
- }
-
- /* don't found write urb say error */
- if (!wrUrb) {
- dbg("%s - no free send urb available", __func__);
- retval = CPC_ERR_CAN_NO_TRANSMIT_BUF;
- goto exit;
- }
- dbg("URB write req");
-
- obuf = (unsigned char *) wrUrb->urb->transfer_buffer;
-
- /* copy the data from userspace into our transfer buffer;
- * this is the only copy required.
- */
- if (copy_from_user(&obuf[4], buffer, count) != 0) {
- atomic_set(&wrUrb->busy, 0); /* release urb */
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- /* check if it is a DRIVER information message, so we can
- * response to that message and not the USB
- */
- info = (CPC_MSG_T *) &obuf[4];
-
- bytes_written = 11 + info->length;
- if (bytes_written >= wrUrb->size) {
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- switch (info->type) {
- case CPC_CMD_T_CLEAR_MSG_QUEUE:
- ResetBuffer(card->chan);
- break;
-
- case CPC_CMD_T_INQ_MSG_QUEUE_CNT:
- retval = cpc_get_buffer_count(card->chan);
- atomic_set(&wrUrb->busy, 0);
-
- goto exit;
-
- case CPC_CMD_T_INQ_INFO:
- if (info->msg.info.source == CPC_INFOMSG_T_DRIVER) {
- /* release urb cause we'll use it for driver
- * information
- */
- atomic_set(&wrUrb->busy, 0);
- if (IsBufferFull(card->chan)) {
- retval = CPC_ERR_IO_TRANSFER;
- goto exit;
- }
-
- /* it is a driver information request message and we have
- * free rx slots to store the response
- */
- type = info->msg.info.type;
- info = &card->chan->buf[card->chan->iidx];
-
- info->type = CPC_MSG_T_INFO;
- info->msg.info.source = CPC_INFOMSG_T_DRIVER;
- info->msg.info.type = type;
-
- switch (type) {
- case CPC_INFOMSG_T_VERSION:
- info->length = strlen(CPC_DRIVER_VERSION) + 2;
- sprintf(info->msg.info.msg, "%s\n",
- CPC_DRIVER_VERSION);
- break;
-
- case CPC_INFOMSG_T_SERIAL:
- info->length = strlen(CPC_DRIVER_SERIAL) + 2;
- sprintf(info->msg.info.msg, "%s\n",
- CPC_DRIVER_SERIAL);
- break;
-
- default:
- info->length = 2;
- info->msg.info.type =
- CPC_INFOMSG_T_UNKNOWN_TYPE;
- }
-
- card->chan->WnR = 0;
- card->chan->iidx =
- (card->chan->iidx + 1) % CPC_MSG_BUF_CNT;
-
- retval = info->length;
- goto exit;
- }
- break;
- case CPC_CMD_T_CAN_PRMS:
- /* Check the controller type. If it's the new CPC-USB, make sure if these are SJA1000 params */
- if (info->msg.canparams.cc_type != SJA1000
- && info->msg.canparams.cc_type != M16C_BASIC
- && (card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID
- && info->msg.canparams.cc_type != SJA1000)) {
- /* don't forget to release the urb */
- atomic_set(&wrUrb->busy, 0);
- retval = CPC_ERR_WRONG_CONTROLLER_TYPE;
- goto exit;
- }
- break;
- }
-
- /* just convert the params if it is an old CPC-USB with M16C controller */
- if (card->productId == USB_CPCUSB_M16C_PRODUCT_ID) {
- /* if it is a parameter message convert it from SJA1000 controller
- * settings to M16C Basic controller settings
- */
- SJA1000_TO_M16C_BASIC_Params((CPC_MSG_T *) &obuf[4]);
- }
-
- /* don't forget the byte alignment */
- cpcusb_align_buffer_alignment(&obuf[4]);
-
- /* setup a the 4 byte header */
- obuf[0] = obuf[1] = obuf[2] = obuf[3] = 0;
-
- /* this urb was already set up, except for this write size */
- wrUrb->urb->transfer_buffer_length = bytes_written + 4;
-
- /* send the data out the bulk port */
- /* a character device write uses GFP_KERNEL,
- unless a spinlock is held */
- retval = usb_submit_urb(wrUrb->urb, GFP_KERNEL);
- if (retval) {
- atomic_set(&wrUrb->busy, 0); /* release urb */
- err("%s - failed submitting write urb, error %d",
- __func__, retval);
- } else {
- retval = bytes_written;
- }
-
-exit:
- /* unlock the device */
- up(&card->sem);
-
- dbg("%s - leaved", __func__);
-
- return retval;
-}
-
-/*
- * callback for interrupt IN urb
- */
-static void cpcusb_read_interrupt_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- int retval;
- unsigned long flags;
-
- spin_lock_irqsave(&card->slock, flags);
-
- if (!card->present) {
- spin_unlock_irqrestore(&card->slock, flags);
- info("%s - no such device", __func__);
- return;
- }
-
- switch (urb->status) {
- case 0: /* success */
- card->free_slots = card->intr_in_buffer[1];
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - intr urb killed", __func__);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- retval = usb_submit_urb(urb, GFP_ATOMIC);
- if (retval) {
- err("%s - failed resubmitting intr urb, error %d",
- __func__, retval);
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
- wake_up_interruptible(card->chan->CPCWait_q);
-
- return;
-}
-
-#define UN_SHIFT 1
-#define CPCMSG_HEADER_LEN_FIRMWARE 11
-static inline int cpcusb_unalign_and_copy_buffy(unsigned char *out,
- unsigned char *in)
-{
- unsigned int i, j;
-
- for (i = 0; i < 3; i++)
- out[i] = in[i];
-
- for (j = 0; j < (in[1] + (CPCMSG_HEADER_LEN_FIRMWARE - 3)); j++)
- out[j + i + UN_SHIFT] = in[j + i];
-
- return i + j;
-}
-
-/*
- * callback for bulk IN urb
- */
-static void cpcusb_read_bulk_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- CPC_CHAN_T *chan;
- unsigned char *ibuf = urb->transfer_buffer;
- int retval, msgCnt, start, again = 0;
- unsigned long flags;
-
- if (!card) {
- err("%s - device object lost", __func__);
- return;
- }
-
- spin_lock_irqsave(&card->slock, flags);
-
- if (!card->present) {
- spin_unlock_irqrestore(&card->slock, flags);
- info("%s - no such device", __func__);
- return;
- }
-
- switch (urb->status) {
- case 0: /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - read urb killed", __func__);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- if (urb->actual_length) {
- msgCnt = ibuf[0] & ~0x80;
- again = ibuf[0] & 0x80;
-
- /* we have a 4 byte header */
- start = 4;
- chan = card->chan;
- while (msgCnt) {
- if (!(IsBufferFull(card->chan))) {
- start +=
- cpcusb_unalign_and_copy_buffy((unsigned char *)
- &chan->buf[chan->iidx], &ibuf[start]);
-
- if (start > urb->transfer_buffer_length) {
- err("%d > %d", start, urb->transfer_buffer_length);
- break;
- }
-
- chan->WnR = 0;
- chan->iidx = (chan->iidx + 1) % CPC_MSG_BUF_CNT;
- msgCnt--;
- } else {
- break;
- }
- }
- }
-
- usb_fill_bulk_urb(urb, card->udev,
- usb_rcvbulkpipe(card->udev, card->num_bulk_in),
- urb->transfer_buffer,
- urb->transfer_buffer_length,
- cpcusb_read_bulk_callback, card);
-
- retval = usb_submit_urb(urb, GFP_ATOMIC);
-
- if (retval) {
- err("%s - failed resubmitting read urb, error %d", __func__, retval);
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
-
- wake_up_interruptible(card->chan->CPCWait_q);
-}
-
-/*
- * callback for bulk IN urb
- */
-static void cpcusb_write_bulk_callback(struct urb *urb)
-{
- CPC_USB_T *card = (CPC_USB_T *) urb->context;
- unsigned long flags;
- int j;
-
- spin_lock_irqsave(&card->slock, flags);
-
- /* find this urb */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (card->wrUrbs[j].urb == urb) {
- dbg("URB found no. %d", j);
- /* notify anyone waiting that the write has finished */
- complete(&card->wrUrbs[j].finished);
- atomic_set(&card->wrUrbs[j].busy, 0);
- break;
- }
- }
-
- switch (urb->status) {
- case 0: /* success */
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- /* urb was killed */
- spin_unlock_irqrestore(&card->slock, flags);
- dbg("%s - write urb no. %d killed", __func__, j);
- return;
- default:
- info("%s - nonzero urb status %d", __func__, urb->status);
- break;
- }
-
- spin_unlock_irqrestore(&card->slock, flags);
-
- wake_up_interruptible(card->chan->CPCWait_q);
-}
-
-static inline int cpcusb_get_free_slot(void)
-{
- int i;
-
- for (i = 0; i < CPC_USB_CARD_CNT; i++) {
- if (!CPCUSB_Table[i])
- return i;
- }
-
- return -1;
-}
-
-/*
- * probe function for new CPC-USB devices
- */
-static int cpcusb_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- CPC_USB_T *card = NULL;
- CPC_CHAN_T *chan = NULL;
-
- struct usb_device *udev = interface_to_usbdev(interface);
- struct usb_host_interface *iface_desc;
- struct usb_endpoint_descriptor *endpoint;
-
- int i, j, retval = -ENOMEM, slot;
-
- slot = cpcusb_get_free_slot();
- if (slot < 0) {
- info("No more devices supported");
- return -ENOMEM;
- }
-
- /* allocate memory for our device state and initialize it */
- card = kzalloc(sizeof(CPC_USB_T), GFP_KERNEL);
- if (!card) {
- err("Out of memory");
- return -ENOMEM;
- }
- CPCUSB_Table[slot] = card;
-
- /* allocate and initialize the channel struct */
- card->chan = kmalloc(sizeof(CPC_CHAN_T), GFP_KERNEL);
- if (!card->chan) {
- kfree(card);
- err("Out of memory");
- return -ENOMEM;
- }
-
- chan = card->chan;
- memset(chan, 0, sizeof(CPC_CHAN_T));
- ResetBuffer(chan);
-
- init_MUTEX(&card->sem);
- spin_lock_init(&card->slock);
-
- card->udev = udev;
- card->interface = interface;
- if (udev->descriptor.iSerialNumber) {
- usb_string(udev, udev->descriptor.iSerialNumber, card->serialNumber,
- 128);
- info("Serial %s", card->serialNumber);
- }
-
- card->productId = udev->descriptor.idProduct;
- info("Product %s",
- card->productId == USB_CPCUSB_LPC2119_PRODUCT_ID ?
- "CPC-USB/ARM7" : "CPC-USB/M16C");
-
- /* set up the endpoint information */
- /* check out the endpoints */
- /* use only the first bulk-in and bulk-out endpoints */
- iface_desc = &interface->altsetting[0];
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
- endpoint = &iface_desc->endpoint[i].desc;
-
- if (!card->num_intr_in &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_INT)) {
- card->intr_in_urb = usb_alloc_urb(0, GFP_KERNEL);
- card->num_intr_in = 1;
-
- if (!card->intr_in_urb) {
- err("No free urbs available");
- goto error;
- }
-
- dbg("intr_in urb %d", card->num_intr_in);
- }
-
- if (!card->num_bulk_in &&
- (endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
- card->num_bulk_in = 2;
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- card->urbs[j].size = endpoint->wMaxPacketSize;
- card->urbs[j].urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!card->urbs[j].urb) {
- err("No free urbs available");
- goto error;
- }
- card->urbs[j].buffer =
- usb_buffer_alloc(udev,
- card->urbs[j].size,
- GFP_KERNEL,
- &card->urbs[j].urb->transfer_dma);
- if (!card->urbs[j].buffer) {
- err("Couldn't allocate bulk_in_buffer");
- goto error;
- }
- }
- info("%s - %d reading URB's allocated",
- __func__, CPC_USB_URB_CNT);
- }
-
- if (!card->num_bulk_out &&
- !(endpoint->bEndpointAddress & USB_DIR_IN) &&
- ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
- == USB_ENDPOINT_XFER_BULK)) {
-
- card->num_bulk_out = 2;
-
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- card->wrUrbs[j].size =
- endpoint->wMaxPacketSize;
- card->wrUrbs[j].urb =
- usb_alloc_urb(0, GFP_KERNEL);
- if (!card->wrUrbs[j].urb) {
- err("No free urbs available");
- goto error;
- }
- card->wrUrbs[j].buffer = usb_buffer_alloc(udev,
- card->wrUrbs[j].size, GFP_KERNEL,
- &card->wrUrbs[j].urb->transfer_dma);
-
- if (!card->wrUrbs[j].buffer) {
- err("Couldn't allocate bulk_out_buffer");
- goto error;
- }
-
- usb_fill_bulk_urb(card->wrUrbs[j].urb, udev,
- usb_sndbulkpipe(udev, endpoint->bEndpointAddress),
- card->wrUrbs[j].buffer,
- card->wrUrbs[j].size,
- cpcusb_write_bulk_callback,
- card);
- }
-
- info("%s - %d writing URB's allocated", __func__, CPC_USB_URB_CNT);
- }
- }
-
- if (!(card->num_bulk_in && card->num_bulk_out)) {
- err("Couldn't find both bulk-in and bulk-out endpoints");
- goto error;
- }
-
- /* allow device read, write and ioctl */
- card->present = 1;
-
- /* we can register the device now, as it is ready */
- usb_set_intfdata(interface, card);
- retval = usb_register_dev(interface, &cpcusb_class);
-
- if (retval) {
- /* something prevented us from registering this driver */
- err("Not able to get a minor for this device.");
- usb_set_intfdata(interface, NULL);
- goto error;
- }
-
- card->chan->minor = card->minor = interface->minor;
-
- chan->buf = vmalloc(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT);
- if (chan->buf == NULL) {
- err("Out of memory");
- retval = -ENOMEM;
- goto error;
- }
- info("Allocated memory for %d messages (%lu kbytes)",
- CPC_MSG_BUF_CNT, (long unsigned int)(sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT) / 1000);
- memset(chan->buf, 0, sizeof(CPC_MSG_T) * CPC_MSG_BUF_CNT);
-
- ResetBuffer(chan);
-
- card->chan->CPCWait_q = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL);
- if (!card->chan->CPCWait_q) {
- err("Out of memory");
- retval = -ENOMEM;
- goto error;
- }
- init_waitqueue_head(card->chan->CPCWait_q);
-
- CPCUSB_Table[slot] = card;
- card->idx = slot;
- CPCUsbCnt++;
-
- /* let the user know what node this device is now attached to */
- info("Device now attached to USB-%d", card->minor);
- return 0;
-
-error:
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- if (card->urbs[j].buffer) {
- usb_buffer_free(card->udev, card->urbs[j].size,
- card->urbs[j].buffer,
- card->urbs[j].urb->transfer_dma);
- card->urbs[j].buffer = NULL;
- }
- if (card->urbs[j].urb) {
- usb_free_urb(card->urbs[j].urb);
- card->urbs[j].urb = NULL;
- }
- }
-
- cpcusb_delete(card);
- return retval;
-}
-
-/*
- * called by the usb core when the device is removed from the system
- */
-static void cpcusb_disconnect(struct usb_interface *interface)
-{
- CPC_USB_T *card = NULL;
- int minor, j;
-
- /* prevent races with open() */
- down(&disconnect_sem);
-
- card = usb_get_intfdata(interface);
- usb_set_intfdata(interface, NULL);
-
- down(&card->sem);
-
- /* prevent device read, write and ioctl */
- card->present = 0;
-
- minor = card->minor;
-
- /* free all urbs and their buffers */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- /* terminate an ongoing write */
- if (atomic_read(&card->wrUrbs[j].busy)) {
- usb_kill_urb(card->wrUrbs[j].urb);
- wait_for_completion(&card->wrUrbs[j].finished);
- }
- usb_buffer_free(card->udev, card->wrUrbs[j].size,
- card->wrUrbs[j].buffer,
- card->wrUrbs[j].urb->transfer_dma);
- usb_free_urb(card->wrUrbs[j].urb);
- }
- info("%d write URBs freed", CPC_USB_URB_CNT);
-
- /* free all urbs and their buffers */
- for (j = 0; j < CPC_USB_URB_CNT; j++) {
- usb_buffer_free(card->udev, card->urbs[j].size,
- card->urbs[j].buffer,
- card->urbs[j].urb->transfer_dma);
- usb_free_urb(card->urbs[j].urb);
- }
- info("%d read URBs freed", CPC_USB_URB_CNT);
- usb_free_urb(card->intr_in_urb);
-
- /* give back our minor */
- usb_deregister_dev(interface, &cpcusb_class);
-
- up(&card->sem);
-
- /* if the device is opened, cpcusb_release will clean this up */
- if (!card->open)
- cpcusb_delete(card);
- else
- wake_up_interruptible(card->chan->CPCWait_q);
-
- up(&disconnect_sem);
-
- CPCUsbCnt--;
- info("USB-%d now disconnected", minor);
-}
-
-static int __init CPCUsb_Init(void)
-{
- int result, i;
-
- info(DRIVER_DESC " v" DRIVER_VERSION);
- info("Build on " __DATE__ " at " __TIME__);
-
- for (i = 0; i < CPC_USB_CARD_CNT; i++)
- CPCUSB_Table[i] = 0;
-
- /* register this driver with the USB subsystem */
- result = usb_register(&cpcusb_driver);
- if (result) {
- err("usb_register failed. Error number %d", result);
- return result;
- }
-
- procDir = proc_mkdir(CPC_USB_PROC_DIR, NULL);
- if (!procDir) {
- err("Could not create proc entry");
- } else {
- procEntry = create_proc_read_entry("info", 0444, procDir,
- cpcusb_proc_read_info,
- NULL);
- if (!procEntry) {
- err("Could not create proc entry %s", CPC_USB_PROC_DIR "/info");
- remove_proc_entry(CPC_USB_PROC_DIR, NULL);
- procDir = NULL;
- }
- }
-
- return 0;
-}
-
-static void __exit CPCUsb_Exit(void)
-{
- wait_event(rmmodWq, !atomic_read(&useCount));
-
- /* deregister this driver with the USB subsystem */
- usb_deregister(&cpcusb_driver);
-
- if (procDir) {
- if (procEntry)
- remove_proc_entry("info", procDir);
- remove_proc_entry(CPC_USB_PROC_DIR, NULL);
- }
-}
-
-module_init(CPCUsb_Init);
-module_exit(CPCUsb_Exit);
+++ /dev/null
-/*
- * CPC CAN Interface Definitions
- *
- * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef CPC_HEADER
-#define CPC_HEADER
-
-/*
- * the maximum length of the union members within a CPC_MSG
- * this value can be defined by the customer, but has to be
- * >= 64 bytes
- * however, if not defined before, we set a length of 64 byte
- */
-#if !defined(CPC_MSG_LEN) || (CPC_MSG_LEN < 64)
-#undef CPC_MSG_LEN
-#define CPC_MSG_LEN 64
-#endif
-
-/*
- * Transmission of events from CPC interfaces to PC can be individually
- * controlled per event type. Default state is: don't transmit
- * Control values are constructed by bit-or of Subject and Action
- * and passed to CPC_Control()
- */
-
-/* Control-Values for CPC_Control() Command Subject Selection */
-#define CONTR_CAN_Message 0x04
-#define CONTR_Busload 0x08
-#define CONTR_CAN_State 0x0C
-#define CONTR_SendAck 0x10
-#define CONTR_Filter 0x14
-#define CONTR_CmdQueue 0x18 /* reserved, do not use */
-#define CONTR_BusError 0x1C
-
-/* Control Command Actions */
-#define CONTR_CONT_OFF 0
-#define CONTR_CONT_ON 1
-#define CONTR_SING_ON 2
-/*
- * CONTR_SING_ON doesn't change CONTR_CONT_ON state, so it should be
- * read as: transmit at least once
- */
-
-/* defines for confirmed request */
-#define DO_NOT_CONFIRM 0
-#define DO_CONFIRM 1
-
-/* event flags */
-#define EVENT_READ 0x01
-#define EVENT_WRITE 0x02
-
-/*
- * Messages from CPC to PC contain a message object type field.
- * The following message types are sent by CPC and can be used in
- * handlers, others should be ignored.
- */
-#define CPC_MSG_T_RESYNC 0 /* Normally to be ignored */
-#define CPC_MSG_T_CAN 1 /* CAN data frame */
-#define CPC_MSG_T_BUSLOAD 2 /* Busload message */
-#define CPC_MSG_T_STRING 3 /* Normally to be ignored */
-#define CPC_MSG_T_CONTI 4 /* Normally to be ignored */
-#define CPC_MSG_T_MEM 7 /* Normally not to be handled */
-#define CPC_MSG_T_RTR 8 /* CAN remote frame */
-#define CPC_MSG_T_TXACK 9 /* Send acknowledge */
-#define CPC_MSG_T_POWERUP 10 /* Power-up message */
-#define CPC_MSG_T_CMD_NO 11 /* Normally to be ignored */
-#define CPC_MSG_T_CAN_PRMS 12 /* Actual CAN parameters */
-#define CPC_MSG_T_ABORTED 13 /* Command aborted message */
-#define CPC_MSG_T_CANSTATE 14 /* CAN state message */
-#define CPC_MSG_T_RESET 15 /* used to reset CAN-Controller */
-#define CPC_MSG_T_XCAN 16 /* XCAN data frame */
-#define CPC_MSG_T_XRTR 17 /* XCAN remote frame */
-#define CPC_MSG_T_INFO 18 /* information strings */
-#define CPC_MSG_T_CONTROL 19 /* used for control of interface/driver behaviour */
-#define CPC_MSG_T_CONFIRM 20 /* response type for confirmed requests */
-#define CPC_MSG_T_OVERRUN 21 /* response type for overrun conditions */
-#define CPC_MSG_T_KEEPALIVE 22 /* response type for keep alive conditions */
-#define CPC_MSG_T_CANERROR 23 /* response type for bus error conditions */
-#define CPC_MSG_T_DISCONNECTED 24 /* response type for a disconnected interface */
-#define CPC_MSG_T_ERR_COUNTER 25 /* RX/TX error counter of CAN controller */
-
-#define CPC_MSG_T_FIRMWARE 100 /* response type for USB firmware download */
-
-/*
- * Messages from the PC to the CPC interface contain a command field
- * Most of the command types are wrapped by the library functions and have therefore
- * normally not to be used.
- * However, programmers who wish to circumvent the library and talk directly
- * to the drivers (mainly Linux programmers) can use the following
- * command types:
- */
-#define CPC_CMD_T_CAN 1 /* CAN data frame */
-#define CPC_CMD_T_CONTROL 3 /* used for control of interface/driver behaviour */
-#define CPC_CMD_T_CAN_PRMS 6 /* set CAN parameters */
-#define CPC_CMD_T_CLEARBUF 8 /* clears input queue; this is depricated, use CPC_CMD_T_CLEAR_MSG_QUEUE instead */
-#define CPC_CMD_T_INQ_CAN_PARMS 11 /* inquire actual CAN parameters */
-#define CPC_CMD_T_FILTER_PRMS 12 /* set filter parameter */
-#define CPC_CMD_T_RTR 13 /* CAN remote frame */
-#define CPC_CMD_T_CANSTATE 14 /* CAN state message */
-#define CPC_CMD_T_XCAN 15 /* XCAN data frame */
-#define CPC_CMD_T_XRTR 16 /* XCAN remote frame */
-#define CPC_CMD_T_RESET 17 /* used to reset CAN-Controller */
-#define CPC_CMD_T_INQ_INFO 18 /* miscellanous information strings */
-#define CPC_CMD_T_OPEN_CHAN 19 /* open a channel */
-#define CPC_CMD_T_CLOSE_CHAN 20 /* close a channel */
-#define CPC_CMD_T_CNTBUF 21 /* this is depricated, use CPC_CMD_T_INQ_MSG_QUEUE_CNT instead */
-#define CPC_CMD_T_CAN_EXIT 200 /* exit the CAN (disable interrupts; reset bootrate; reset output_cntr; mode = 1) */
-
-#define CPC_CMD_T_INQ_MSG_QUEUE_CNT CPC_CMD_T_CNTBUF /* inquires the count of elements in the message queue */
-#define CPC_CMD_T_INQ_ERR_COUNTER 25 /* request the CAN controllers error counter */
-#define CPC_CMD_T_CLEAR_MSG_QUEUE CPC_CMD_T_CLEARBUF /* clear CPC_MSG queue */
-#define CPC_CMD_T_CLEAR_CMD_QUEUE 28 /* clear CPC_CMD queue */
-#define CPC_CMD_T_FIRMWARE 100 /* reserved, must not be used */
-#define CPC_CMD_T_USB_RESET 101 /* reserved, must not be used */
-#define CPC_CMD_T_WAIT_NOTIFY 102 /* reserved, must not be used */
-#define CPC_CMD_T_WAIT_SETUP 103 /* reserved, must not be used */
-#define CPC_CMD_T_ABORT 255 /* Normally not to be used */
-
-/* definitions for CPC_MSG_T_INFO information sources */
-#define CPC_INFOMSG_T_UNKNOWN_SOURCE 0
-#define CPC_INFOMSG_T_INTERFACE 1
-#define CPC_INFOMSG_T_DRIVER 2
-#define CPC_INFOMSG_T_LIBRARY 3
-
-/* information types */
-#define CPC_INFOMSG_T_UNKNOWN_TYPE 0
-#define CPC_INFOMSG_T_VERSION 1
-#define CPC_INFOMSG_T_SERIAL 2
-
-/* definitions for controller types */
-#define PCA82C200 1 /* Philips basic CAN controller, replaced by SJA1000 */
-#define SJA1000 2 /* Philips basic CAN controller */
-#define AN82527 3 /* Intel full CAN controller */
-#define M16C_BASIC 4 /* M16C controller running in basic CAN (not full CAN) mode */
-
-/* channel open error codes */
-#define CPC_ERR_NO_FREE_CHANNEL -1 /* no more free space within the channel array */
-#define CPC_ERR_CHANNEL_ALREADY_OPEN -2 /* the channel is already open */
-#define CPC_ERR_CHANNEL_NOT_ACTIVE -3 /* access to a channel not active failed */
-#define CPC_ERR_NO_DRIVER_PRESENT -4 /* no driver at the location searched by the library */
-#define CPC_ERR_NO_INIFILE_PRESENT -5 /* the library could not find the inifile */
-#define CPC_ERR_WRONG_PARAMETERS -6 /* wrong parameters in the inifile */
-#define CPC_ERR_NO_INTERFACE_PRESENT -7 /* 1. The specified interface is not connected */
- /* 2. The interface (mostly CPC-USB) was disconnected upon operation */
-#define CPC_ERR_NO_MATCHING_CHANNEL -8 /* the driver couldn't find a matching channel */
-#define CPC_ERR_NO_BUFFER_AVAILABLE -9 /* the driver couldn't allocate buffer for messages */
-#define CPC_ERR_NO_INTERRUPT -10 /* the requested interrupt couldn't be claimed */
-#define CPC_ERR_NO_MATCHING_INTERFACE -11 /* no interface type related to this channel was found */
-#define CPC_ERR_NO_RESOURCES -12 /* the requested resources could not be claimed */
-#define CPC_ERR_SOCKET -13 /* error concerning TCP sockets */
-
-/* init error codes */
-#define CPC_ERR_WRONG_CONTROLLER_TYPE -14 /* wrong CAN controller type within initialization */
-#define CPC_ERR_NO_RESET_MODE -15 /* the controller could not be set into reset mode */
-#define CPC_ERR_NO_CAN_ACCESS -16 /* the CAN controller could not be accessed */
-
-/* transmit error codes */
-#define CPC_ERR_CAN_WRONG_ID -20 /* the provided CAN id is too big */
-#define CPC_ERR_CAN_WRONG_LENGTH -21 /* the provided CAN length is too long */
-#define CPC_ERR_CAN_NO_TRANSMIT_BUF -22 /* the transmit buffer was occupied */
-#define CPC_ERR_CAN_TRANSMIT_TIMEOUT -23 /* The message could not be sent within a */
- /* specified time */
-
-/* other error codes */
-#define CPC_ERR_SERVICE_NOT_SUPPORTED -30 /* the requested service is not supported by the interface */
-#define CPC_ERR_IO_TRANSFER -31 /* a transmission error down to the driver occurred */
-#define CPC_ERR_TRANSMISSION_FAILED -32 /* a transmission error down to the interface occurred */
-#define CPC_ERR_TRANSMISSION_TIMEOUT -33 /* a timeout occurred within transmission to the interface */
-#define CPC_ERR_OP_SYS_NOT_SUPPORTED -35 /* the operating system is not supported */
-#define CPC_ERR_UNKNOWN -40 /* an unknown error ocurred (mostly IOCTL errors) */
-
-#define CPC_ERR_LOADING_DLL -50 /* the library 'cpcwin.dll' could not be loaded */
-#define CPC_ERR_ASSIGNING_FUNCTION -51 /* the specified function could not be assigned */
-#define CPC_ERR_DLL_INITIALIZATION -52 /* the DLL was not initialized correctly */
-#define CPC_ERR_MISSING_LICFILE -55 /* the file containing the licenses does not exist */
-#define CPC_ERR_MISSING_LICENSE -56 /* a required license was not found */
-
-/* CAN state bit values. Ignore any bits not listed */
-#define CPC_CAN_STATE_BUSOFF 0x80
-#define CPC_CAN_STATE_ERROR 0x40
-
-/* Mask to help ignore undefined bits */
-#define CPC_CAN_STATE_MASK 0xc0
-
-/*
- * CAN-Message representation in a CPC_MS
- * Message object type is CPC_MSG_T_CAN or CPC_MSG_T_RTR
- * or CPC_MSG_T_XCAN or CPC_MSG_T_XRTR
- */
-typedef struct CPC_CAN_MSG {
- u32 id;
- u8 length;
- u8 msg[8];
-} CPC_CAN_MSG_T;
-
-/* representation of the CAN parameters for the PCA82C200 controller */
-typedef struct CPC_PCA82C200_PARAMS {
- u8 acc_code; /* Acceptance-code for receive, Standard: 0 */
- u8 acc_mask; /* Acceptance-mask for receive, Standard: 0xff (everything) */
- u8 btr0; /* Bus-timing register 0 */
- u8 btr1; /* Bus-timing register 1 */
- u8 outp_contr; /* Output-control register */
-} CPC_PCA82C200_PARAMS_T;
-
-/* representation of the CAN parameters for the SJA1000 controller */
-typedef struct CPC_SJA1000_PARAMS {
- u8 mode; /* enables single or dual acceptance filtering */
- u8 acc_code0; /* Acceptance-code for receive, Standard: 0 */
- u8 acc_code1;
- u8 acc_code2;
- u8 acc_code3;
- u8 acc_mask0; /* Acceptance-mask for receive, Standard: 0xff (everything) */
- u8 acc_mask1;
- u8 acc_mask2;
- u8 acc_mask3;
- u8 btr0; /* Bus-timing register 0 */
- u8 btr1; /* Bus-timing register 1 */
- u8 outp_contr; /* Output-control register */
-} CPC_SJA1000_PARAMS_T;
-
-/*
- * representation of the CAN parameters for the M16C controller
- * in basic CAN mode (means no full CAN)
- */
-typedef struct CPC_M16C_BASIC_PARAMS {
- u8 con0;
- u8 con1;
- u8 ctlr0;
- u8 ctlr1;
- u8 clk;
- u8 acc_std_code0;
- u8 acc_std_code1;
- u8 acc_ext_code0;
- u8 acc_ext_code1;
- u8 acc_ext_code2;
- u8 acc_ext_code3;
- u8 acc_std_mask0;
- u8 acc_std_mask1;
- u8 acc_ext_mask0;
- u8 acc_ext_mask1;
- u8 acc_ext_mask2;
- u8 acc_ext_mask3;
-} CPC_M16C_BASIC_PARAMS_T;
-
-/* CAN params message representation */
-typedef struct CPC_CAN_PARAMS {
- u8 cc_type; /* represents the controller type */
- union {
- CPC_M16C_BASIC_PARAMS_T m16c_basic;
- CPC_SJA1000_PARAMS_T sja1000;
- CPC_PCA82C200_PARAMS_T pca82c200;
- } cc_params;
-} CPC_CAN_PARAMS_T;
-
-/* CHAN init params representation */
-typedef struct CPC_CHAN_PARAMS {
- int fd;
-} CPC_CHAN_PARAMS_T;
-
-/* CAN init params message representation */
-typedef struct CPC_INIT_PARAMS {
- CPC_CHAN_PARAMS_T chanparams;
- CPC_CAN_PARAMS_T canparams;
-} CPC_INIT_PARAMS_T;
-
-/* structure for confirmed message handling */
-typedef struct CPC_CONFIRM {
- u8 result; /* error code */
-} CPC_CONFIRM_T;
-
-/* structure for information requests */
-typedef struct CPC_INFO {
- u8 source; /* interface, driver or library */
- u8 type; /* version or serial number */
- char msg[CPC_MSG_LEN - 2]; /* string holding the requested information */
-} CPC_INFO_T;
-
-/*
- * OVERRUN
- * In general two types of overrun may occur.
- * A hardware overrun, where the CAN controller
- * lost a message, because the interrupt was
- * not handled before the next messgae comes in.
- * Or a software overrun, where i.e. a received
- * message could not be stored in the CPC_MSG
- * buffer.
- */
-
-/* After a software overrun has occurred
- * we wait until we have CPC_OVR_GAP slots
- * free in the CPC_MSG buffer.
- */
-#define CPC_OVR_GAP 10
-
-/*
- * Two types of software overrun may occur.
- * A received CAN message or a CAN state event
- * can cause an overrun.
- * Note: A CPC_CMD which would normally store
- * its result immediately in the CPC_MSG
- * queue may fail, because the message queue is full.
- * This will not generate an overrun message, but
- * will halt command execution, until this command
- * is able to store its message in the message queue.
- */
-#define CPC_OVR_EVENT_CAN 0x01
-#define CPC_OVR_EVENT_CANSTATE 0x02
-#define CPC_OVR_EVENT_BUSERROR 0x04
-
-/*
- * If the CAN controller lost a message
- * we indicate it with the highest bit
- * set in the count field.
- */
-#define CPC_OVR_HW 0x80
-
-/* structure for overrun conditions */
-typedef struct {
- u8 event;
- u8 count;
-} CPC_OVERRUN_T;
-
-/*
- * CAN errors
- * Each CAN controller type has different
- * registers to record errors.
- * Therefor a structure containing the specific
- * errors is set up for each controller here
- */
-
-/*
- * SJA1000 error structure
- * see the SJA1000 datasheet for detailed
- * explanation of the registers
- */
-typedef struct CPC_SJA1000_CAN_ERROR {
- u8 ecc; /* error capture code register */
- u8 rxerr; /* RX error counter register */
- u8 txerr; /* TX error counter register */
-} CPC_SJA1000_CAN_ERROR_T;
-
-/*
- * M16C error structure
- * see the M16C datasheet for detailed
- * explanation of the registers
- */
-typedef struct CPC_M16C_CAN_ERROR {
- u8 tbd; /* to be defined */
-} CPC_M16C_CAN_ERROR_T;
-
-/* structure for CAN error conditions */
-#define CPC_CAN_ECODE_ERRFRAME 0x01
-typedef struct CPC_CAN_ERROR {
- u8 ecode;
- struct {
- u8 cc_type; /* CAN controller type */
- union {
- CPC_SJA1000_CAN_ERROR_T sja1000;
- CPC_M16C_CAN_ERROR_T m16c;
- } regs;
- } cc;
-} CPC_CAN_ERROR_T;
-
-/*
- * Structure containing RX/TX error counter.
- * This structure is used to request the
- * values of the CAN controllers TX and RX
- * error counter.
- */
-typedef struct CPC_CAN_ERR_COUNTER {
- u8 rx;
- u8 tx;
-} CPC_CAN_ERR_COUNTER_T;
-
-/* If this flag is set, transmissions from PC to CPC are protected against loss */
-#define CPC_SECURE_TO_CPC 0x01
-
-/* If this flag is set, transmissions from CPC to PC are protected against loss */
-#define CPC_SECURE_TO_PC 0x02
-
-/* If this flag is set, the CAN-transmit buffer is checked to be free before sending a message */
-#define CPC_SECURE_SEND 0x04
-
-/*
- * If this flag is set, the transmission complete flag is checked
- * after sending a message
- * THIS IS CURRENTLY ONLY IMPLEMENTED IN THE PASSIVE INTERFACE DRIVERS
- */
-#define CPC_SECURE_TRANSMIT 0x08
-
-/* main message type used between library and application */
-typedef struct CPC_MSG {
- u8 type; /* type of message */
- u8 length; /* length of data within union 'msg' */
- u8 msgid; /* confirmation handle */
- u32 ts_sec; /* timestamp in seconds */
- u32 ts_nsec; /* timestamp in nano seconds */
- union {
- u8 generic[CPC_MSG_LEN];
- CPC_CAN_MSG_T canmsg;
- CPC_CAN_PARAMS_T canparams;
- CPC_CONFIRM_T confirmation;
- CPC_INFO_T info;
- CPC_OVERRUN_T overrun;
- CPC_CAN_ERROR_T error;
- CPC_CAN_ERR_COUNTER_T err_counter;
- u8 busload;
- u8 canstate;
- } msg;
-} CPC_MSG_T;
-
-#endif /* CPC_HEADER */
+++ /dev/null
-/*
- * CPCLIB
- *
- * Copyright (C) 2000-2008 EMS Dr. Thomas Wuensche
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-#ifndef CPC_INT_H
-#define CPC_INT_H
-
-#include <linux/wait.h>
-
-#define CPC_MSG_BUF_CNT 1500
-
-#define CPC_PROC_DIR "driver/"
-
-#undef dbg
-#undef err
-#undef info
-
-/* Use our own dbg macro */
-#define dbg(format, arg...) do { if (debug) printk( KERN_INFO format "\n" , ## arg); } while (0)
-#define err(format, arg...) do { printk( KERN_INFO "ERROR " format "\n" , ## arg); } while (0)
-#define info(format, arg...) do { printk( KERN_INFO format "\n" , ## arg); } while (0)
-
-/* Macros help using of our buffers */
-#define IsBufferFull(x) (!(x)->WnR) && ((x)->iidx == (x)->oidx)
-#define IsBufferEmpty(x) ((x)->WnR) && ((x)->iidx == (x)->oidx)
-#define IsBufferNotEmpty(x) (!(x)->WnR) || ((x)->iidx != (x)->oidx)
-#define ResetBuffer(x) do { (x)->oidx = (x)->iidx=0; (x)->WnR = 1; } while(0);
-
-#define CPC_BufWriteAllowed ((chan->oidx != chan->iidx) || chan->WnR)
-
-typedef void (*chan_write_byte_t) (void *chan, unsigned int reg,
- unsigned char val);
-typedef unsigned char (*chan_read_byte_t) (void *chan, unsigned int reg);
-
-typedef struct CPC_CHAN {
- void __iomem * canBase; /* base address of SJA1000 */
- chan_read_byte_t read_byte; /* CAN controller read access routine */
- chan_write_byte_t write_byte; /* CAN controller write access routine */
- CPC_MSG_T *buf; /* buffer for CPC msg */
- unsigned int iidx;
- unsigned int oidx;
- unsigned int WnR;
- unsigned int minor;
- unsigned int locked;
- unsigned int irqDisabled;
-
- unsigned char cpcCtrlCANMessage;
- unsigned char cpcCtrlCANState;
- unsigned char cpcCtrlBUSState;
-
- unsigned char controllerType;
-
- unsigned long ovrTimeSec;
- unsigned long ovrTimeNSec;
- unsigned long ovrLockedBuffer;
- CPC_OVERRUN_T ovr;
-
- /* for debugging only */
- unsigned int handledIrqs;
- unsigned int lostMessages;
-
- unsigned int sentStdCan;
- unsigned int sentExtCan;
- unsigned int sentStdRtr;
- unsigned int sentExtRtr;
-
- unsigned int recvStdCan;
- unsigned int recvExtCan;
- unsigned int recvStdRtr;
- unsigned int recvExtRtr;
-
- wait_queue_head_t *CPCWait_q;
-
- void *private;
-} CPC_CHAN_T;
-
-#endif
+++ /dev/null
-/* Header for CPC-USB Driver ********************
- * Copyright 1999, 2000, 2001
- *
- * Company: EMS Dr. Thomas Wuensche
- * Sonnenhang 3
- * 85304 Ilmmuenster
- * Phone: +49-8441-490260
- * Fax: +49-8441-81860
- * email: support@ems-wuensche.com
- * WWW: www.ems-wuensche.com
- */
-
-#ifndef CPCUSB_H
-#define CPCUSB_H
-
-#undef err
-#undef dbg
-#undef info
-
-/* Use our own dbg macro */
-#define dbg(format, arg...) do { if (debug) printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0)
-#define info(format, arg...) do { printk(KERN_INFO "CPC-USB: " format "\n" , ## arg); } while (0)
-#define err(format, arg...) do { printk(KERN_INFO "CPC-USB(ERROR): " format "\n" , ## arg); } while (0)
-
-#define CPC_USB_CARD_CNT 4
-
-typedef struct CPC_USB_READ_URB {
- unsigned char *buffer; /* the buffer to send data */
- size_t size; /* the size of the send buffer */
- struct urb *urb; /* the urb used to send data */
-} CPC_USB_READ_URB_T;
-
-typedef struct CPC_USB_WRITE_URB {
- unsigned char *buffer; /* the buffer to send data */
- size_t size; /* the size of the send buffer */
- struct urb *urb; /* the urb used to send data */
- atomic_t busy; /* true if write urb is busy */
- struct completion finished; /* wait for the write to finish */
-} CPC_USB_WRITE_URB_T;
-
-#define CPC_USB_URB_CNT 10
-
-typedef struct CPC_USB {
- struct usb_device *udev; /* save off the usb device pointer */
- struct usb_interface *interface; /* the interface for this device */
- unsigned char minor; /* the starting minor number for this device */
- unsigned char num_ports; /* the number of ports this device has */
- int num_intr_in; /* number of interrupt in endpoints we have */
- int num_bulk_in; /* number of bulk in endpoints we have */
- int num_bulk_out; /* number of bulk out endpoints we have */
-
- CPC_USB_READ_URB_T urbs[CPC_USB_URB_CNT];
-
- unsigned char intr_in_buffer[4]; /* interrupt transfer buffer */
- struct urb *intr_in_urb; /* interrupt transfer urb */
-
- CPC_USB_WRITE_URB_T wrUrbs[CPC_USB_URB_CNT];
-
- int open; /* if the port is open or not */
- int present; /* if the device is not disconnected */
- struct semaphore sem; /* locks this structure */
-
- int free_slots; /* free send slots of CPC-USB */
- int idx;
-
- spinlock_t slock;
-
- char serialNumber[128]; /* serial number */
- int productId; /* product id to differ between M16C and LPC2119 */
- CPC_CHAN_T *chan;
-} CPC_USB_T;
-
-#define CPCTable CPCUSB_Table
-
-#define CPC_DRIVER_VERSION "0.724"
-#define CPC_DRIVER_SERIAL "not applicable"
-
-#define OBUF_SIZE 255 /* 4096 */
-
-/* read timeouts -- RD_NAK_TIMEOUT * RD_EXPIRE = Number of seconds */
-#define RD_NAK_TIMEOUT (10*HZ) /* Default number of X seconds to wait */
-#define RD_EXPIRE 12 /* Number of attempts to wait X seconds */
-
-#define CPC_USB_BASE_MNR 0 /* CPC-USB start at minor 0 */
-
-#endif
+++ /dev/null
-#ifndef _SJA2M16C_H
-#define _SJA2M16C_H
-
-#include "cpc.h"
-
-#define BAUDRATE_TOLERANCE_PERCENT 1
-#define SAMPLEPOINT_TOLERANCE_PERCENT 5
-#define SAMPLEPOINT_UPPER_LIMIT 88
-
-/* M16C parameters */
-struct FIELD_C0CONR {
- unsigned int brp:4;
- unsigned int sam:1;
- unsigned int pr:3;
- unsigned int dummy:8;
-};
-struct FIELD_C1CONR {
- unsigned int ph1:3;
- unsigned int ph2:3;
- unsigned int sjw:2;
- unsigned int dummy:8;
-};
-typedef union C0CONR {
- unsigned char c0con;
- struct FIELD_C0CONR bc0con;
-} C0CONR_T;
-typedef union C1CONR {
- unsigned char c1con;
- struct FIELD_C1CONR bc1con;
-} C1CONR_T;
-
-#define SJA_TSEG1 ((pParams->btr1 & 0x0f)+1)
-#define SJA_TSEG2 (((pParams->btr1 & 0x70)>>4)+1)
-#define SJA_BRP ((pParams->btr0 & 0x3f)+1)
-#define SJA_SJW ((pParams->btr0 & 0xc0)>>6)
-#define SJA_SAM ((pParams->btr1 & 0x80)>>7)
-int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2);
-int samplepoint_m16c(int brp, int pr, int ph1, int ph2);
-int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T *pMsg);
-
-#endif
+++ /dev/null
-/****************************************************************************
-*
-* Copyright (c) 2003,2004 by EMS Dr. Thomas Wuensche
-*
-* - All rights reserved -
-*
-* This code is provided "as is" without warranty of any kind, either
-* expressed or implied, including but not limited to the liability
-* concerning the freedom from material defects, the fitness for parti-
-* cular purposes or the freedom of proprietary rights of third parties.
-*
-*****************************************************************************
-* Module name.: cpcusb
-*****************************************************************************
-* Include file: cpc.h
-*****************************************************************************
-* Project.....: Windows Driver Development Kit
-* Filename....: sja2m16c.cpp
-* Authors.....: (GU) Gerhard Uttenthaler
-* (CS) Christian Schoett
-*****************************************************************************
-* Short descr.: converts baudrate between SJA1000 and M16C
-*****************************************************************************
-* Description.: handles the baudrate conversion from SJA1000 parameters to
-* M16C parameters
-*****************************************************************************
-* Address : EMS Dr. Thomas Wuensche
-* Sonnenhang 3
-* D-85304 Ilmmuenster
-* Tel. : +49-8441-490260
-* Fax. : +49-8441-81860
-* email: support@ems-wuensche.com
-*****************************************************************************
-* History
-*****************************************************************************
-* Version Date Auth Remark
-*
-* 01.00 ?? GU - initial release
-* 01.10 ?????????? CS - adapted to fit into the USB Windows driver
-* 02.00 18.08.2004 GU - improved the baudrate calculating algorithm
-* - implemented acceptance filtering
-* 02.10 10.09.2004 CS - adapted to fit into the USB Windows driver
-*****************************************************************************
-* ToDo's
-*****************************************************************************
-*/
-
-/****************************************************************************/
-/* I N C L U D E S
-*/
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/module.h>
-#include <linux/poll.h>
-#include <linux/smp_lock.h>
-#include <linux/completion.h>
-#include <asm/uaccess.h>
-#include <linux/usb.h>
-
-#include "cpc.h"
-#include "cpc_int.h"
-#include "cpcusb.h"
-
-#include "sja2m16c.h"
-
-/*********************************************************************/
-int baudrate_m16c(int clk, int brp, int pr, int ph1, int ph2)
-{
- return (16000000 / (1 << clk)) / 2 / (brp + 1) / (1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1);
-}
-
-
-/*********************************************************************/
-int samplepoint_m16c(int brp, int pr, int ph1, int ph2)
-{
- return (100 * (1 + pr + 1 + ph1 + 1)) / (1 + pr + 1 + ph1 + 1 +
- ph2 + 1);
-}
-
-
-/****************************************************************************
-* Function.....: SJA1000_TO_M16C_BASIC_Params
-*
-* Task.........: This routine converts SJA1000 CAN btr parameters into M16C
-* parameters based on the sample point and the error. In
-* addition it converts the acceptance filter parameters to
-* suit the M16C parameters
-*
-* Parameters...: None
-*
-* Return values: None
-*
-* Comments.....:
-*****************************************************************************
-* History
-*****************************************************************************
-* 19.01.2005 CS - modifed the conversion of SJA1000 filter params into
-* M16C params. Due to compatibility reasons with the
-* older 82C200 CAN controller the SJA1000
-****************************************************************************/
-int SJA1000_TO_M16C_BASIC_Params(CPC_MSG_T * in)
-{
- int sjaBaudrate;
- int sjaSamplepoint;
- int *baudrate_error; // BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7]
- int *samplepoint_error; // BRP[0..15], PR[0..7], PH1[0..7], PH2[0..7]
- int baudrate_error_merk;
- int clk, brp, pr, ph1, ph2;
- int clk_merk, brp_merk, pr_merk, ph1_merk, ph2_merk;
- int index;
- unsigned char acc_code0, acc_code1, acc_code2, acc_code3;
- unsigned char acc_mask0, acc_mask1, acc_mask2, acc_mask3;
- CPC_MSG_T * out;
- C0CONR_T c0con;
- C1CONR_T c1con;
- int tmpAccCode;
- int tmpAccMask;
-
- // we have to convert the parameters into M16C parameters
- CPC_SJA1000_PARAMS_T * pParams;
-
- // check if the type is CAN parameters and if we have to convert the given params
- if (in->type != CPC_CMD_T_CAN_PRMS
- || in->msg.canparams.cc_type != SJA1000)
- return 0;
- pParams =
- (CPC_SJA1000_PARAMS_T *) & in->msg.canparams.cc_params.sja1000;
- acc_code0 = pParams->acc_code0;
- acc_code1 = pParams->acc_code1;
- acc_code2 = pParams->acc_code2;
- acc_code3 = pParams->acc_code3;
- acc_mask0 = pParams->acc_mask0;
- acc_mask1 = pParams->acc_mask1;
- acc_mask2 = pParams->acc_mask2;
- acc_mask3 = pParams->acc_mask3;
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("acc_code0: %2.2Xh\n", acc_code0);
- info("acc_code1: %2.2Xh\n", acc_code1);
- info("acc_code2: %2.2Xh\n", acc_code2);
- info("acc_code3: %2.2Xh\n", acc_code3);
- info("acc_mask0: %2.2Xh\n", acc_mask0);
- info("acc_mask1: %2.2Xh\n", acc_mask1);
- info("acc_mask2: %2.2Xh\n", acc_mask2);
- info("acc_mask3: %2.2Xh\n", acc_mask3);
-
-#endif /* */
- if (!
- (baudrate_error =
- (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) {
- err("Could not allocate memory\n");
- return -3;
- }
- if (!
- (samplepoint_error =
- (int *) vmalloc(sizeof(int) * 16 * 8 * 8 * 8 * 5))) {
- err("Could not allocate memory\n");
- vfree(baudrate_error);
- return -3;
- }
- memset(baudrate_error, 0xff, sizeof(baudrate_error));
- memset(samplepoint_error, 0xff, sizeof(baudrate_error));
- sjaBaudrate =
- 16000000 / 2 / SJA_BRP / (1 + SJA_TSEG1 + SJA_TSEG2);
- sjaSamplepoint =
- 100 * (1 + SJA_TSEG1) / (1 + SJA_TSEG1 + SJA_TSEG2);
- if (sjaBaudrate == 0) {
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return -2;
- }
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("\nStarting SJA CAN params\n");
- info("-------------------------\n");
- info("TS1 : %2.2Xh TS2 : %2.2Xh\n", SJA_TSEG1, SJA_TSEG2);
- info("BTR0 : %2.2Xh BTR1: %2.2Xh\n", pParams->btr0,
- pParams->btr1);
- info("Baudrate: %d.%dkBaud\n", sjaBaudrate / 1000,
- sjaBaudrate % 1000);
- info("Sample P: 0.%d\n", sjaSamplepoint);
- info("\n");
-
-#endif /* */
- c0con.bc0con.sam = SJA_SAM;
- c1con.bc1con.sjw = SJA_SJW;
-
- // calculate errors for all baudrates
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- baudrate_error[index] =
- 100 *
- abs(baudrate_m16c
- (clk, brp, pr, ph1,
- ph2) -
- sjaBaudrate) /
- sjaBaudrate;
- samplepoint_error[index] =
- abs(samplepoint_m16c
- (brp, pr, ph1,
- ph2) -
- sjaSamplepoint);
-
-#if 0
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c(clk,
- brp, pr,
- ph1,
- ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
- info
- ("clk : %d\n",
- clk);
-
-#endif /* */
- index++;
- }
- }
- }
- }
- }
-
- // mark all baudrate_error entries which are outer limits
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- if ((baudrate_error[index]
- >
- BAUDRATE_TOLERANCE_PERCENT)
- ||
- (samplepoint_error
- [index] >
- SAMPLEPOINT_TOLERANCE_PERCENT)
- ||
- (samplepoint_m16c
- (brp, pr, ph1,
- ph2) >
- SAMPLEPOINT_UPPER_LIMIT))
- {
- baudrate_error
- [index] = -1;
- } else
- if (((1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1) < 8)
- ||
- ((1 + pr + 1 +
- ph1 + 1 + ph2 +
- 1) > 25)) {
- baudrate_error
- [index] = -1;
- }
-
-#if 0
- else {
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c
- (clk, brp, pr,
- ph1, ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
- }
-
-#endif /* */
- index++;
- }
- }
- }
- }
- }
-
- // find list of minimum of baudrate_error within unmarked entries
- clk_merk = brp_merk = pr_merk = ph1_merk = ph2_merk = 0;
- baudrate_error_merk = 100;
- index = 0;
- for (clk = 0; clk < 5; clk++) {
- for (brp = 0; brp < 16; brp++) {
- for (pr = 0; pr < 8; pr++) {
- for (ph1 = 0; ph1 < 8; ph1++) {
- for (ph2 = 0; ph2 < 8; ph2++) {
- if (baudrate_error[index]
- != -1) {
- if (baudrate_error
- [index] <
- baudrate_error_merk)
- {
- baudrate_error_merk
- =
- baudrate_error
- [index];
- brp_merk =
- brp;
- pr_merk =
- pr;
- ph1_merk =
- ph1;
- ph2_merk =
- ph2;
- clk_merk =
- clk;
-
-#if 0
- info
- ("brp: %2.2Xh pr: %2.2Xh ph1: %2.2Xh ph2: %2.2Xh\n",
- brp,
- pr,
- ph1,
- ph2);
- info
- ("Baudrate : %d kBaud\n",
- baudrate_m16c
- (clk,
- brp,
- pr,
- ph1,
- ph2));
- info
- ("Baudrate Error: %d\n",
- baudrate_error
- [index]);
- info
- ("Sample P Error: %d\n",
- samplepoint_error
- [index]);
-
-#endif /* */
- }
- }
- index++;
- }
- }
- }
- }
- }
- if (baudrate_error_merk == 100) {
- info("ERROR: Could not convert CAN init parameter\n");
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return -1;
- }
-
- // setting m16c CAN parameter
- c0con.bc0con.brp = brp_merk;
- c0con.bc0con.pr = pr_merk;
- c1con.bc1con.ph1 = ph1_merk;
- c1con.bc1con.ph2 = ph2_merk;
-
-#ifdef _DEBUG_OUTPUT_CAN_PARAMS
- info("\nResulting M16C CAN params\n");
- info("-------------------------\n");
- info("clk : %2.2Xh\n", clk_merk);
- info("ph1 : %2.2Xh ph2: %2.2Xh\n", c1con.bc1con.ph1 + 1,
- c1con.bc1con.ph2 + 1);
- info("pr : %2.2Xh brp: %2.2Xh\n", c0con.bc0con.pr + 1,
- c0con.bc0con.brp + 1);
- info("sjw : %2.2Xh sam: %2.2Xh\n", c1con.bc1con.sjw,
- c0con.bc0con.sam);
- info("co1 : %2.2Xh co0: %2.2Xh\n", c1con.c1con, c0con.c0con);
- info("Baudrate: %d.%dBaud\n",
- baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2) / 1000,
- baudrate_m16c(clk_merk, c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2) % 1000);
- info("Sample P: 0.%d\n",
- samplepoint_m16c(c0con.bc0con.brp, c0con.bc0con.pr,
- c1con.bc1con.ph1, c1con.bc1con.ph2));
- info("\n");
-
-#endif /* */
- out = in;
- out->type = 6;
- out->length = sizeof(CPC_M16C_BASIC_PARAMS_T) + 1;
- out->msg.canparams.cc_type = M16C_BASIC;
- out->msg.canparams.cc_params.m16c_basic.con0 = c0con.c0con;
- out->msg.canparams.cc_params.m16c_basic.con1 = c1con.c1con;
- out->msg.canparams.cc_params.m16c_basic.ctlr0 = 0x4C;
- out->msg.canparams.cc_params.m16c_basic.ctlr1 = 0x00;
- out->msg.canparams.cc_params.m16c_basic.clk = clk_merk;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code0 =
- acc_code0;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code1 = acc_code1;
-
-// info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1);
- tmpAccCode = (acc_code1 >> 5) + (acc_code0 << 3);
- out->msg.canparams.cc_params.m16c_basic.acc_std_code0 =
- (unsigned char) tmpAccCode;
- out->msg.canparams.cc_params.m16c_basic.acc_std_code1 =
- (unsigned char) (tmpAccCode >> 8);
-
-// info("code0: 0x%2.2X, code1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_code0, out->msg.canparams.cc_params.m16c_basic.acc_std_code1);
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 =
- ~acc_mask0;
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 =
- ~acc_mask1;
-
-// info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1);
- tmpAccMask = ((acc_mask1) >> 5) + ((acc_mask0) << 3);
-
-// info("tmpAccMask: 0x%4.4X\n", tmpAccMask);
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask0 =
- (unsigned char) ~tmpAccMask;
- out->msg.canparams.cc_params.m16c_basic.acc_std_mask1 =
- (unsigned char) ~(tmpAccMask >> 8);
-
-// info("mask0: 0x%2.2X, mask1: 0x%2.2X\n", out->msg.canparams.cc_params.m16c_basic.acc_std_mask0, out->msg.canparams.cc_params.m16c_basic.acc_std_mask1);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code0 =
- (unsigned char) tmpAccCode;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code1 =
- (unsigned char) (tmpAccCode >> 8);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code2 = acc_code2;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_code3 = acc_code3;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask0 =
- (unsigned char) ~tmpAccMask;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask1 =
- (unsigned char) ~(tmpAccMask >> 8);
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask2 =
- ~acc_mask2;
- out->msg.canparams.cc_params.m16c_basic.acc_ext_mask3 =
- ~acc_mask3;
- vfree(baudrate_error);
- vfree(samplepoint_error);
- return 0;
-}
-
-
struct dst_node *n = q->queuedata;
int err = -EIO;
- if (bio_empty_barrier(bio) && !q->prepare_discard_fn) {
+ if (bio_empty_barrier(bio) && !blk_queue_discard(q)) {
/*
* This is a dirty^Wnice hack, but if we complete this
* operation with -EOPNOTSUPP like intended, XFS
/*
* Configuration parser.
*/
-static void cn_dst_callback(struct cn_msg *msg)
+static void cn_dst_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
struct dst_ctl *ctl;
int err;
struct dst_node *n = NULL, *tmp;
unsigned int hash;
+ if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN)) {
+ err = -EPERM;
+ goto out;
+ }
+
if (msg->len < sizeof(struct dst_ctl)) {
err = -EBADMSG;
goto out;
extern inline void add_10bit(u32 *v, int n)
{
- *v = INDEX10(*v + n);
+ *v = INDEX10(*v + n) | (*v & ET_DMA10_WRAP);
}
/*
static inline u32 bump_fbr(u32 *fbr, u32 limit)
{
- u32 v = *fbr;
- add_10bit(&v, 1);
- if (v > limit)
- v = (*fbr & ~ET_DMA10_MASK) ^ ET_DMA10_WRAP;
- *fbr = v;
- return v;
+ u32 v = *fbr;
+ v++;
+ /* This works for all cases where limit < 1024. The 1023 case
+ works because 1023++ is 1024 which means the if condition is not
+ taken but the carry of the bit into the wrap bit toggles the wrap
+ value correctly */
+ if ((v & ET_DMA10_MASK) > limit) {
+ v &= ~ET_DMA10_MASK;
+ v ^= ET_DMA10_WRAP;
+ }
+ /* For the 1023 case */
+ v &= (ET_DMA10_MASK|ET_DMA10_WRAP);
+ *fbr = v;
+ return v;
}
/**
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
-
-# Ubuntu 8.04 has CONFIG_SND undefined, so include lum sound/config.h too
-ifeq ($(CONFIG_SND),)
-EXTRA_CFLAGS += -include sound/config.h
-endif
#define _CHANNEL_MGMT_H_
#include <linux/list.h>
+#include <linux/timer.h>
#include "RingBuffer.h"
#include "VmbusChannelInterface.h"
#include "VmbusPacketFormat.h"
ChannelMessageViewRangeRemove = 18,
#endif
ChannelMessageCount
-} __attribute__((packed));
+};
struct vmbus_channel_message_header {
enum vmbus_channel_message_type MessageType;
*/
spin_lock_irqsave(&netDevice->receive_packet_list_lock, flags);
while (!list_empty(&netDevice->ReceivePacketList)) {
- list_move_tail(&netDevice->ReceivePacketList, &listHead);
+ list_move_tail(netDevice->ReceivePacketList.next, &listHead);
if (++count == vmxferpagePacket->RangeCount + 1)
break;
}
/* Return it to the freelist */
spin_lock_irqsave(&netDevice->receive_packet_list_lock, flags);
for (i = count; i != 0; i--) {
- list_move_tail(&listHead,
+ list_move_tail(listHead.next,
&netDevice->ReceivePacketList);
}
spin_unlock_irqrestore(&netDevice->receive_packet_list_lock,
}
/* Remove the 1st packet to represent the xfer page packet itself */
- xferpagePacket = list_entry(&listHead, struct xferpage_packet,
- ListEntry);
+ xferpagePacket = (struct xferpage_packet*)listHead.next;
list_del(&xferpagePacket->ListEntry);
/* This is how much we can satisfy */
/* Each range represents 1 RNDIS pkt that contains 1 ethernet frame */
for (i = 0; i < (count - 1); i++) {
- netvscPacket = list_entry(&listHead, struct hv_netvsc_packet,
- ListEntry);
+ netvscPacket = (struct hv_netvsc_packet*)listHead.next;
list_del(&netvscPacket->ListEntry);
/* Initialize the netvsc packet */
TODO:
- fix remaining checkpatch warnings and errors
+ - use of /** when it is not a kerneldoc header
- remove RingBuffer.c to us in-kernel ringbuffer functions instead.
- audit the vmbus to verify it is working properly with the
driver model
+ - convert vmbus driver interface function pointer tables
+ to constant, a.k.a vmbus_ops
- see if the vmbus can be merged with the other virtual busses
in the kernel
- audit the network driver
+ - use existing net_device_stats struct in network device
+ - checking for carrier inside open is wrong, network device API
+ confusion??
- audit the block driver
- audit the scsi driver
#include <linux/ioport.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#ifndef _OSD_H_
#define _OSD_H_
+#include <linux/workqueue.h>
/* Defines */
#define ALIGN_UP(value, align) (((value) & (align-1)) ? \
child_device_obj = &child_device_ctx->device_obj;
child_device_obj->context = context;
- memcpy(&child_device_obj->deviceType, &type, sizeof(struct hv_guid));
- memcpy(&child_device_obj->deviceInstance, &instance,
+ memcpy(&child_device_obj->deviceType, type, sizeof(struct hv_guid));
+ memcpy(&child_device_obj->deviceInstance, instance,
sizeof(struct hv_guid));
- memcpy(&child_device_ctx->class_id, &type, sizeof(struct hv_guid));
- memcpy(&child_device_ctx->device_id, &instance, sizeof(struct hv_guid));
+ memcpy(&child_device_ctx->class_id, type, sizeof(struct hv_guid));
+ memcpy(&child_device_ctx->device_id, instance, sizeof(struct hv_guid));
DPRINT_EXIT(VMBUS_DRV);
DPRINT_DBG(VMBUS_DRV, "child device (%p) registering",
child_device_ctx);
- /* Make sure we are not registered already */
- if (strlen(dev_name(&child_device_ctx->device)) != 0) {
- DPRINT_ERR(VMBUS_DRV,
- "child device (%p) already registered - busid %s",
- child_device_ctx,
- dev_name(&child_device_ctx->device));
-
- ret = -1;
- goto Cleanup;
- }
-
- /* Set the device bus id. Otherwise, device_register()will fail. */
+ /* Set the device name. Otherwise, device_register() will fail. */
dev_set_name(&child_device_ctx->device, "vmbus_0_%d",
atomic_inc_return(&device_num));
DPRINT_INFO(VMBUS_DRV, "child device (%p) registered",
&child_device_ctx->device);
-Cleanup:
DPRINT_EXIT(VMBUS_DRV);
return ret;
static int vmbus_uevent(struct device *device, struct kobj_uevent_env *env)
{
struct device_context *device_ctx = device_to_device_context(device);
- int i = 0;
- int len = 0;
int ret;
DPRINT_ENTER(VMBUS_DRV);
device_ctx->class_id.data[14],
device_ctx->class_id.data[15]);
- env->envp_idx = i;
- env->buflen = len;
ret = add_uevent_var(env, "VMBUS_DEVICE_CLASS_GUID={"
"%02x%02x%02x%02x-%02x%02x-%02x%02x-"
"%02x%02x%02x%02x%02x%02x%02x%02x}",
if (ret)
return ret;
- env->envp[env->envp_idx] = NULL;
-
DPRINT_EXIT(VMBUS_DRV);
return 0;
menuconfig IIO
tristate "Industrial I/O support"
+ depends on !S390
---help---
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/poll.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
#include <linux/cdev.h>
#include "iio.h"
#include "trigger_consumer.h"
return tsl2561_powerdown(client);
}
-static unsigned short normal_i2c[] = { 0x29, 0x39, 0x49, I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
static const struct i2c_device_id tsl2561_id[] = {
{ "tsl2561", 0 },
{ }
config OTUS
tristate "Atheros OTUS 802.11n USB wireless support"
- depends on USB && WLAN_80211 && MAC80211
+ depends on USB && WLAN && MAC80211
default N
---help---
Enable support for Atheros 802.11n USB hardware:
user_buf_running = NULL;
hash_str = NULL;
node_ptr = kmalloc(sizeof(struct cap_node), GFP_KERNEL);
- user_buf = kzalloc(count, GFP_KERNEL);
+ user_buf = kzalloc(count+1, GFP_KERNEL);
if (!node_ptr || !user_buf)
goto out;
list_add(&(node_ptr->list), &(dev->head->list));
node_ptr = NULL;
} else {
+ char *tmpu;
if (!cap_devices[0].head ||
list_empty(&(cap_devices[0].head->list))) {
retval = -EINVAL;
* need to split it and hash 'user1@user2' using 'randomstring'
* as the key.
*/
- user_buf_running = kstrdup(user_buf, GFP_KERNEL);
- source_user = strsep(&user_buf_running, "@");
- target_user = strsep(&user_buf_running, "@");
- rand_str = strsep(&user_buf_running, "@");
+ tmpu = user_buf_running = kstrdup(user_buf, GFP_KERNEL);
+ source_user = strsep(&tmpu, "@");
+ target_user = strsep(&tmpu, "@");
+ rand_str = tmpu;
if (!source_user || !target_user || !rand_str) {
retval = -EINVAL;
goto out;
/* hash the string user1@user2 with rand_str as the key */
len = strlen(source_user) + strlen(target_user) + 1;
- hash_str = kzalloc(len, GFP_KERNEL);
+ /* src, @, len, \0 */
+ hash_str = kzalloc(len+1, GFP_KERNEL);
strcat(hash_str, source_user);
strcat(hash_str, "@");
strcat(hash_str, target_user);
return;
}
- if (keypad_enabled && keypad_initialized)
+ if (keypad_enabled && keypad_initialized) {
misc_deregister(&keypad_dev);
+ keypad_initialized = 0;
+ }
- if (lcd_enabled && lcd_initialized)
+ if (lcd_enabled && lcd_initialized) {
misc_deregister(&lcd_dev);
+ lcd_initialized = 0;
+ }
parport_release(pprt);
parport_unregister_device(pprt);
del_timer(&scan_timer);
if (pprt != NULL) {
- if (keypad_enabled)
+ if (keypad_enabled) {
misc_deregister(&keypad_dev);
+ keypad_initialized = 0;
+ }
if (lcd_enabled) {
panel_lcd_print("\x0cLCD driver " PANEL_VERSION
"\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-");
misc_deregister(&lcd_dev);
+ lcd_initialized = 0;
}
/* TODO: free all input signals */
#include <linux/init.h>
#include <linux/ioctl.h>
#include <linux/io.h>
+#include <linux/sched.h>
#include "poch.h"
return err;
}
-static void pohmelfs_cn_callback(struct cn_msg *msg)
+static void pohmelfs_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
int err;
+ if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN))
+ return;
+
switch (msg->flags) {
case POHMELFS_FLAGS_ADD:
case POHMELFS_FLAGS_DEL:
config RT2860
tristate "Ralink 2860 wireless support"
- depends on PCI && X86 && WLAN_80211
+ depends on PCI && X86 && WLAN
---help---
This is an experimental driver for the Ralink 2860 wireless chip.
ULONG SwIdx = pAd->MgmtRing.TxCpuIdx;
pTxD = (PTXD_STRUC) pAd->MgmtRing.Cell[SwIdx].AllocVa;
+ if (!pTxD)
+ return 0;
pAd->MgmtRing.Cell[SwIdx].pNdisPacket = pPacket;
pAd->MgmtRing.Cell[SwIdx].pNextNdisPacket = NULL;
*************************************************************************
*/
+#include <linux/sched.h>
#include "../rt_config.h"
INT Show_SSID_Proc(
*************************************************************************
*/
+#include <linux/sched.h>
#include "rt_config.h"
ULONG RTDebugLevel = RT_DEBUG_ERROR;
config RT2870
tristate "Ralink 2870/3070 wireless support"
- depends on USB && X86 && WLAN_80211
+ depends on USB && X86 && WLAN
---help---
This is an experimental driver for the Ralink xx70 wireless chips.
config RT3090
tristate "Ralink 3090 wireless support"
- depends on PCI && X86 && WLAN_80211
+ depends on PCI && X86 && WLAN
---help---
This is an experimental driver for the Ralink 3090 wireless chip.
--------- ---------- ----------------------------------------------
*/
+#include <linux/sched.h>
#include "../rt_config.h"
*************************************************************************
*/
+#include <linux/sched.h>
#include "rt_config.h"
ULONG RTDebugLevel = RT_DEBUG_ERROR;
config RTL8187SE
tristate "RealTek RTL8187SE Wireless LAN NIC driver"
- depends on PCI
+ depends on PCI && WLAN
depends on WIRELESS_EXT
default N
---help---
list_del(ptr);
- if (entry->ops) {
+ if (entry->ops)
entry->ops->deinit(entry->priv);
- module_put(entry->ops->owner);
- }
kfree(entry);
}
}
for (i = 0; i < WEP_KEYS; i++) {
struct ieee80211_crypt_data *crypt = ieee->crypt[i];
if (crypt) {
- if (crypt->ops) {
+ if (crypt->ops)
crypt->ops->deinit(crypt->priv);
- module_put(crypt->ops->owner);
- }
kfree(crypt);
ieee->crypt[i] = NULL;
}
goto skip_host_crypt;
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
- request_module("ieee80211_crypt_wep");
+ if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
- request_module("ieee80211_crypt_tkip");
+ else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
- request_module("ieee80211_crypt_ccmp");
+ else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- }
if (ops == NULL) {
printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
}
memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
new_crypt->ops = ops;
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ if (new_crypt->ops)
new_crypt->priv =
new_crypt->ops->init(param->u.crypt.idx);
return -ENOMEM;
memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
- if (!new_crypt->ops) {
- request_module("ieee80211_crypt_wep");
+ if (!new_crypt->ops)
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
- }
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ if (new_crypt->ops)
new_crypt->priv = new_crypt->ops->init(key);
if (!new_crypt->ops || !new_crypt->priv) {
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int i, idx, ret = 0;
int group_key = 0;
- const char *alg, *module;
+ const char *alg;
struct ieee80211_crypto_ops *ops;
struct ieee80211_crypt_data **crypt;
switch (ext->alg) {
case IW_ENCODE_ALG_WEP:
alg = "WEP";
- module = "ieee80211_crypt_wep";
break;
case IW_ENCODE_ALG_TKIP:
alg = "TKIP";
- module = "ieee80211_crypt_tkip";
break;
case IW_ENCODE_ALG_CCMP:
alg = "CCMP";
- module = "ieee80211_crypt_ccmp";
break;
default:
IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
// printk("8-09-08-9=====>%s, alg name:%s\n",__func__, alg);
ops = ieee80211_get_crypto_ops(alg);
- if (ops == NULL) {
- request_module(module);
+ if (ops == NULL)
ops = ieee80211_get_crypto_ops(alg);
- }
if (ops == NULL) {
IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
dev->name, ext->alg);
goto done;
}
new_crypt->ops = ops;
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ if (new_crypt->ops)
new_crypt->priv = new_crypt->ops->init(idx);
if (new_crypt->priv == NULL) {
kfree(new_crypt);
config RTL8192E
tristate "RealTek RTL8192E Wireless LAN NIC driver"
- depends on PCI
+ depends on PCI && WLAN
depends on WIRELESS_EXT
default N
---help---
list_del(ptr);
- if (entry->ops) {
+ if (entry->ops)
entry->ops->deinit(entry->priv);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
- module_put(entry->ops->owner);
-#else
- __MOD_DEC_USE_COUNT(entry->ops->owner);
-#endif
- }
kfree(entry);
}
}
for (i = 0; i < WEP_KEYS; i++) {
struct ieee80211_crypt_data *crypt = ieee->crypt[i];
if (crypt) {
- if (crypt->ops) {
+ if (crypt->ops)
crypt->ops->deinit(crypt->priv);
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
- module_put(crypt->ops->owner);
-#else
- __MOD_DEC_USE_COUNT(crypt->ops->owner);
-#endif
- }
kfree(crypt);
ieee->crypt[i] = NULL;
}
goto skip_host_crypt;
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
- request_module("ieee80211_crypt_wep");
+ if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- //set WEP40 first, it will be modified according to WEP104 or WEP40 at other place
- } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
- request_module("ieee80211_crypt_tkip");
+ /* set WEP40 first, it will be modified according to WEP104 or
+ * WEP40 at other place */
+ else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
- request_module("ieee80211_crypt_ccmp");
+ else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- }
if (ops == NULL) {
printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
}
memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
new_crypt->ops = ops;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
-#else
- if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner))
-#endif
+ if (new_crypt->ops)
new_crypt->priv =
new_crypt->ops->init(param->u.crypt.idx);
return -ENOMEM;
memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
- if (!new_crypt->ops) {
- request_module("ieee80211_crypt_wep");
+ if (!new_crypt->ops)
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
- }
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,0)
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
-#else
- if (new_crypt->ops && try_inc_mod_count(new_crypt->ops->owner))
-#endif
+ if (new_crypt->ops)
new_crypt->priv = new_crypt->ops->init(key);
if (!new_crypt->ops || !new_crypt->priv) {
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int i, idx;
int group_key = 0;
- const char *alg, *module;
+ const char *alg;
struct ieee80211_crypto_ops *ops;
struct ieee80211_crypt_data **crypt;
switch (ext->alg) {
case IW_ENCODE_ALG_WEP:
alg = "WEP";
- module = "ieee80211_crypt_wep";
break;
case IW_ENCODE_ALG_TKIP:
alg = "TKIP";
- module = "ieee80211_crypt_tkip";
break;
case IW_ENCODE_ALG_CCMP:
alg = "CCMP";
- module = "ieee80211_crypt_ccmp";
break;
default:
IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
printk("alg name:%s\n",alg);
ops = ieee80211_get_crypto_ops(alg);
- if (ops == NULL) {
- request_module(module);
+ if (ops == NULL)
ops = ieee80211_get_crypto_ops(alg);
- }
if (ops == NULL) {
IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
dev->name, ext->alg);
goto done;
}
new_crypt->ops = ops;
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ if (new_crypt->ops)
new_crypt->priv = new_crypt->ops->init(idx);
if (new_crypt->priv == NULL) {
kfree(new_crypt);
#undef DEBUG_TX_DESC
//#define CONFIG_RTL8192_IO_MAP
+#include <linux/vmalloc.h>
#include <asm/uaccess.h>
#include "r8192E_hw.h"
#include "r8192E.h"
config RTL8192SU
tristate "RealTek RTL8192SU Wireless LAN NIC driver"
- depends on PCI
+ depends on PCI && WLAN
depends on WIRELESS_EXT
default N
---help---
list_del(ptr);
- if (entry->ops) {
+ if (entry->ops)
entry->ops->deinit(entry->priv);
- module_put(entry->ops->owner);
- }
kfree(entry);
}
}
for (i = 0; i < WEP_KEYS; i++) {
struct ieee80211_crypt_data *crypt = ieee->crypt[i];
if (crypt) {
- if (crypt->ops) {
+ if (crypt->ops)
crypt->ops->deinit(crypt->priv);
- module_put(crypt->ops->owner);
- }
kfree(crypt);
ieee->crypt[i] = NULL;
}
goto skip_host_crypt;
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
- request_module("ieee80211_crypt_wep");
+ if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- //set WEP40 first, it will be modified according to WEP104 or WEP40 at other place
- } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
- request_module("ieee80211_crypt_tkip");
+ /* set WEP40 first, it will be modified according to WEP104 or
+ * WEP40 at other place */
+ else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
- request_module("ieee80211_crypt_ccmp");
+ else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0)
ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
- }
if (ops == NULL) {
printk("unknown crypto alg '%s'\n", param->u.crypt.alg);
param->u.crypt.err = IEEE_CRYPT_ERR_UNKNOWN_ALG;
memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
new_crypt->ops = ops;
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ if (new_crypt->ops)
new_crypt->priv =
new_crypt->ops->init(param->u.crypt.idx);
return -ENOMEM;
memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
- if (!new_crypt->ops) {
- request_module("ieee80211_crypt_wep");
+ if (!new_crypt->ops)
new_crypt->ops = ieee80211_get_crypto_ops("WEP");
- }
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ if (new_crypt->ops)
new_crypt->priv = new_crypt->ops->init(key);
if (!new_crypt->ops || !new_crypt->priv) {
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
int i, idx;
int group_key = 0;
- const char *alg, *module;
+ const char *alg;
struct ieee80211_crypto_ops *ops;
struct ieee80211_crypt_data **crypt;
switch (ext->alg) {
case IW_ENCODE_ALG_WEP:
alg = "WEP";
- module = "ieee80211_crypt_wep";
break;
case IW_ENCODE_ALG_TKIP:
alg = "TKIP";
- module = "ieee80211_crypt_tkip";
break;
case IW_ENCODE_ALG_CCMP:
alg = "CCMP";
- module = "ieee80211_crypt_ccmp";
break;
default:
IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
printk("alg name:%s\n",alg);
ops = ieee80211_get_crypto_ops(alg);
- if (ops == NULL) {
- request_module("%s", module);
+ if (ops == NULL)
ops = ieee80211_get_crypto_ops(alg);
- }
if (ops == NULL) {
IEEE80211_DEBUG_WX("%s: unknown crypto alg %d\n",
dev->name, ext->alg);
goto done;
}
new_crypt->ops = ops;
- if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
+ if (new_crypt->ops)
new_crypt->priv = new_crypt->ops->init(idx);
if (new_crypt->priv == NULL) {
kfree(new_crypt);
#include <linux/mm.h>
#include <linux/poll.h>
#include <linux/wait.h>
+#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/firmware.h>
#include <asm/ioctl.h>
+++ /dev/null
-config STLC45XX
- tristate "stlc4550/4560 support"
- depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
- ---help---
- This is a driver for stlc4550 and stlc4560 chipsets.
-
- To compile this driver as a module, choose M here: the module will be
- called stlc45xx. If unsure, say N.
+++ /dev/null
-obj-$(CONFIG_STLC45XX) += stlc45xx.o
+++ /dev/null
-/*
- * This file is part of stlc45xx
- *
- * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include "stlc45xx.h"
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/firmware.h>
-#include <linux/delay.h>
-#include <linux/irq.h>
-#include <linux/spi/spi.h>
-#include <linux/etherdevice.h>
-#include <linux/gpio.h>
-#include <linux/moduleparam.h>
-
-#include "stlc45xx_lmac.h"
-
-/*
- * gpios should be handled in board files and provided via platform data,
- * but because it's currently impossible for stlc45xx to have a header file
- * in include/linux, let's use module paramaters for now
- */
-static int stlc45xx_gpio_power = 97;
-module_param(stlc45xx_gpio_power, int, 0444);
-MODULE_PARM_DESC(stlc45xx_gpio_power, "stlc45xx gpio number for power line");
-
-static int stlc45xx_gpio_irq = 87;
-module_param(stlc45xx_gpio_irq, int, 0444);
-MODULE_PARM_DESC(stlc45xx_gpio_irq, "stlc45xx gpio number for irq line");
-
-static const u8 default_cal_channels[] = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c, 0x09,
- 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10,
- 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xe0, 0x00, 0xe0, 0x00,
- 0xe0, 0x00, 0xe0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0,
- 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42,
- 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00,
- 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9,
- 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00,
- 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc,
- 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0,
- 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4,
- 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d,
- 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa,
- 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00,
- 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17,
- 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00,
- 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00,
- 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00,
- 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96,
- 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x71, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8,
- 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01,
- 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0,
- 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6,
- 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00,
- 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb,
- 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0,
- 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc,
- 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca,
- 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4,
- 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00,
- 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21,
- 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00,
- 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00,
- 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00,
- 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0,
- 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0,
- 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96,
- 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76,
- 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01,
- 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0,
- 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00,
- 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0,
- 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb,
- 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37,
- 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc,
- 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00,
- 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b,
- 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00,
- 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00,
- 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00,
- 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa,
- 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0,
- 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0,
- 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a,
- 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d,
- 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00,
- 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x7b, 0x09, 0x00, 0x00, 0xc9, 0xff,
- 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10,
- 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00,
- 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab,
- 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb,
- 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00,
- 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33,
- 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00,
- 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00,
- 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00,
- 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4,
- 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0,
- 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa,
- 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7,
- 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17,
- 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00,
- 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d,
- 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00,
- 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80,
- 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x80, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00,
- 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00,
- 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0,
- 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42,
- 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00,
- 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01,
- 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00,
- 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc,
- 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0,
- 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4,
- 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0,
- 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21,
- 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00,
- 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17,
- 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00,
- 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0,
- 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0,
- 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96,
- 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x85, 0x09, 0x00, 0x00, 0xc9,
- 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01,
- 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0,
- 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01,
- 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00,
- 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb,
- 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0,
- 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc,
- 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb,
- 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b,
- 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00,
- 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21,
- 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00,
- 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa,
- 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0,
- 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0,
- 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0,
- 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96,
- 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00,
- 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
- 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x8a, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00,
- 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0,
- 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00,
- 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0,
- 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb,
- 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22,
- 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33,
- 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00,
- 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b,
- 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00,
- 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4,
- 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0,
- 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa,
- 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0,
- 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0,
- 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00,
- 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d,
- 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00,
- 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x09, 0x00, 0x00,
- 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10,
- 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00,
- 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54,
- 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42,
- 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00,
- 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33,
- 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00,
- 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc,
- 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0,
- 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4,
- 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0,
- 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa,
- 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00,
- 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17,
- 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00,
- 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c,
- 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00,
- 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96,
- 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x94, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00,
- 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01,
- 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0,
- 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42,
- 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00,
- 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb,
- 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0,
- 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc,
- 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0,
- 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4,
- 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00,
- 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21,
- 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00,
- 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d,
- 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00,
- 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0,
- 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0,
- 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96,
- 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x09, 0x00,
- 0x00, 0xc9, 0xff, 0xd8, 0xff, 0x00, 0x00, 0x00, 0x01, 0x10, 0x01,
- 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0,
- 0x00, 0xf0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00,
- 0x54, 0x01, 0xab, 0xf6, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0,
- 0x42, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb,
- 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0,
- 0x33, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc,
- 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00,
- 0xbc, 0xfb, 0x00, 0xca, 0x79, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b,
- 0xc0, 0x2b, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00,
- 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54,
- 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00,
- 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa,
- 0x00, 0xaa, 0xa7, 0x00, 0xa9, 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0,
- 0x17, 0xc0, 0x17, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0,
- 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06,
- 0x2c, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96,
- 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00,
- 0x96, 0x00, 0x96, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x06, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x9e, 0x09, 0x00, 0x00, 0xc9, 0xff, 0xd8, 0xff,
- 0x00, 0x00, 0x00, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0x10,
- 0x01, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xf0, 0x00, 0xd0, 0x00,
- 0xd0, 0x00, 0xd0, 0x00, 0xd0, 0x00, 0x54, 0x01, 0xab, 0xf6, 0xc0,
- 0x42, 0xc0, 0x42, 0xc0, 0x42, 0xc0, 0x42, 0x00, 0xcb, 0x00, 0xcb,
- 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00, 0xcb, 0x00,
- 0xcb, 0x22, 0x01, 0x37, 0xa9, 0xc0, 0x33, 0xc0, 0x33, 0xc0, 0x33,
- 0xc0, 0x33, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00,
- 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0x00, 0xbc, 0xfb, 0x00, 0xca, 0x79,
- 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0xc0, 0x2b, 0x00, 0xb4, 0x00,
- 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4, 0x00, 0xb4,
- 0x00, 0xb4, 0xd0, 0x00, 0x5d, 0x54, 0xc0, 0x21, 0xc0, 0x21, 0xc0,
- 0x21, 0xc0, 0x21, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa,
- 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0x00, 0xaa, 0xa7, 0x00, 0xa9,
- 0x3d, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0xc0, 0x17, 0x00, 0xa0,
- 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00, 0xa0, 0x00,
- 0xa0, 0x00, 0xa0, 0x7a, 0x00, 0x06, 0x2c, 0xc0, 0x0d, 0xc0, 0x0d,
- 0xc0, 0x0d, 0xc0, 0x0d, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00,
- 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x96, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x80, 0x80, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00 };
-
-static const u8 default_cal_rssi[] = {
- 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72,
- 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00,
- 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a,
- 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe,
- 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00,
- 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01,
- 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a,
- 0x00, 0x00, 0x00, 0x0a, 0x01, 0x72, 0xfe, 0x1a, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00 };
-
-static void stlc45xx_tx_edcf(struct stlc45xx *stlc);
-static void stlc45xx_tx_setup(struct stlc45xx *stlc);
-static void stlc45xx_tx_scan(struct stlc45xx *stlc);
-static void stlc45xx_tx_psm(struct stlc45xx *stlc, bool enable);
-static int stlc45xx_tx_nullfunc(struct stlc45xx *stlc, bool powersave);
-static int stlc45xx_tx_pspoll(struct stlc45xx *stlc, bool powersave);
-
-static ssize_t stlc45xx_sysfs_show_cal_rssi(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct stlc45xx *stlc = dev_get_drvdata(dev);
- ssize_t len;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- len = PAGE_SIZE;
-
- mutex_lock(&stlc->mutex);
-
- if (stlc->cal_rssi)
- hex_dump_to_buffer(stlc->cal_rssi, RSSI_CAL_ARRAY_LEN, 16,
- 2, buf, len, 0);
- mutex_unlock(&stlc->mutex);
-
- len = strlen(buf);
-
- return len;
-}
-
-static ssize_t stlc45xx_sysfs_store_cal_rssi(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct stlc45xx *stlc = dev_get_drvdata(dev);
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- mutex_lock(&stlc->mutex);
-
- if (count != RSSI_CAL_ARRAY_LEN) {
- stlc45xx_error("invalid cal_rssi length: %zu", count);
- count = 0;
- goto out_unlock;
- }
-
- kfree(stlc->cal_rssi);
-
- stlc->cal_rssi = kmemdup(buf, RSSI_CAL_ARRAY_LEN, GFP_KERNEL);
-
- if (!stlc->cal_rssi) {
- stlc45xx_error("failed to allocate memory for cal_rssi");
- count = 0;
- goto out_unlock;
- }
-
- out_unlock:
- mutex_unlock(&stlc->mutex);
-
- return count;
-}
-
-static ssize_t stlc45xx_sysfs_show_cal_channels(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct stlc45xx *stlc = dev_get_drvdata(dev);
- ssize_t len;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- len = PAGE_SIZE;
-
- mutex_lock(&stlc->mutex);
-
- if (stlc->cal_channels)
- hex_dump_to_buffer(stlc->cal_channels, CHANNEL_CAL_ARRAY_LEN,
- 16, 2, buf, len, 0);
-
- mutex_unlock(&stlc->mutex);
-
- len = strlen(buf);
-
- return len;
-}
-
-static ssize_t stlc45xx_sysfs_store_cal_channels(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct stlc45xx *stlc = dev_get_drvdata(dev);
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- mutex_lock(&stlc->mutex);
-
- if (count != CHANNEL_CAL_ARRAY_LEN) {
- stlc45xx_error("invalid cal_channels size: %zu ", count);
- count = 0;
- goto out_unlock;
- }
-
- kfree(stlc->cal_channels);
-
- stlc->cal_channels = kmemdup(buf, count, GFP_KERNEL);
-
- if (!stlc->cal_channels) {
- stlc45xx_error("failed to allocate memory for cal_channels");
- count = 0;
- goto out_unlock;
- }
-
-out_unlock:
- mutex_unlock(&stlc->mutex);
-
- return count;
-}
-
-static ssize_t stlc45xx_sysfs_show_tx_buf(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct stlc45xx *stlc = dev_get_drvdata(dev);
- struct txbuffer *entry;
- ssize_t len = 0;
-
- stlc45xx_debug(DEBUG_FUNC, "%s()", __func__);
-
- mutex_lock(&stlc->mutex);
-
- list_for_each_entry(entry, &stlc->tx_sent, tx_list) {
- len += sprintf(buf + len, "0x%x: 0x%x-0x%x\n",
- entry->handle, entry->start,
- entry->end);
- }
-
- mutex_unlock(&stlc->mutex);
-
- return len;
-}
-
-static DEVICE_ATTR(cal_rssi, S_IRUGO | S_IWUSR,
- stlc45xx_sysfs_show_cal_rssi,
- stlc45xx_sysfs_store_cal_rssi);
-static DEVICE_ATTR(cal_channels, S_IRUGO | S_IWUSR,
- stlc45xx_sysfs_show_cal_channels,
- stlc45xx_sysfs_store_cal_channels);
-static DEVICE_ATTR(tx_buf, S_IRUGO, stlc45xx_sysfs_show_tx_buf, NULL);
-
-static void stlc45xx_spi_read(struct stlc45xx *stlc, unsigned long addr,
- void *buf, size_t len)
-{
- struct spi_transfer t[2];
- struct spi_message m;
-
- /* We first push the address */
- addr = (addr << 8) | ADDR_READ_BIT_15;
-
- spi_message_init(&m);
- memset(t, 0, sizeof(t));
-
- t[0].tx_buf = &addr;
- t[0].len = 2;
- spi_message_add_tail(&t[0], &m);
-
- t[1].rx_buf = buf;
- t[1].len = len;
- spi_message_add_tail(&t[1], &m);
-
- spi_sync(stlc->spi, &m);
-}
-
-
-static void stlc45xx_spi_write(struct stlc45xx *stlc, unsigned long addr,
- void *buf, size_t len)
-{
- struct spi_transfer t[3];
- struct spi_message m;
- u16 last_word;
-
- /* We first push the address */
- addr = addr << 8;
-
- spi_message_init(&m);
- memset(t, 0, sizeof(t));
-
- t[0].tx_buf = &addr;
- t[0].len = 2;
- spi_message_add_tail(&t[0], &m);
-
- t[1].tx_buf = buf;
- t[1].len = len;
- spi_message_add_tail(&t[1], &m);
-
- if (len % 2) {
- last_word = ((u8 *)buf)[len - 1];
-
- t[2].tx_buf = &last_word;
- t[2].len = 2;
- spi_message_add_tail(&t[2], &m);
- }
-
- spi_sync(stlc->spi, &m);
-}
-
-static u16 stlc45xx_read16(struct stlc45xx *stlc, unsigned long addr)
-{
- u16 val;
-
- stlc45xx_spi_read(stlc, addr, &val, sizeof(val));
-
- return val;
-}
-
-static u32 stlc45xx_read32(struct stlc45xx *stlc, unsigned long addr)
-{
- u32 val;
-
- stlc45xx_spi_read(stlc, addr, &val, sizeof(val));
-
- return val;
-}
-
-static void stlc45xx_write16(struct stlc45xx *stlc, unsigned long addr, u16 val)
-{
- stlc45xx_spi_write(stlc, addr, &val, sizeof(val));
-}
-
-static void stlc45xx_write32(struct stlc45xx *stlc, unsigned long addr, u32 val)
-{
- stlc45xx_spi_write(stlc, addr, &val, sizeof(val));
-}
-
-struct stlc45xx_spi_reg {
- u16 address;
- u16 length;
- char *name;
-};
-
-/* caller must hold tx_lock */
-static void stlc45xx_txbuffer_dump(struct stlc45xx *stlc)
-{
- struct txbuffer *txbuffer;
- char *buf, *pos;
- int buf_len, l, count;
-
- if (!(DEBUG_LEVEL & DEBUG_TXBUFFER))
- return;
-
- stlc45xx_debug(DEBUG_FUNC, "%s()", __func__);
-
- buf_len = 500;
- buf = kmalloc(buf_len, GFP_ATOMIC);
- if (!buf)
- return;
-
- pos = buf;
- count = 0;
-
- list_for_each_entry(txbuffer, &stlc->txbuffer, buffer_list) {
- l = snprintf(pos, buf_len, "0x%x-0x%x,",
- txbuffer->start, txbuffer->end);
- /* drop the null byte */
- pos += l;
- buf_len -= l;
- count++;
- }
-
- if (count == 0)
- *pos = '\0';
- else
- *--pos = '\0';
-
- stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: in buffer %d regions: %s",
- count, buf);
-
- kfree(buf);
-}
-
-/* caller must hold tx_lock */
-static int stlc45xx_txbuffer_find(struct stlc45xx *stlc, size_t len)
-{
- struct txbuffer *txbuffer;
- int pos;
-
- stlc45xx_debug(DEBUG_FUNC, "%s()", __func__);
-
- pos = FIRMWARE_TXBUFFER_START;
-
- if (list_empty(&stlc->txbuffer))
- goto out;
-
- /*
- * the entries in txbuffer must be in the same order as they are in
- * the real buffer
- */
- list_for_each_entry(txbuffer, &stlc->txbuffer, buffer_list) {
- if (pos + len < txbuffer->start)
- break;
- pos = ALIGN(txbuffer->end + 1, 4);
- }
-
- if (pos + len > FIRMWARE_TXBUFFER_END)
- /* not enough room */
- pos = -1;
-
- stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: find %zu B: 0x%x", len, pos);
-
-out:
- return pos;
-}
-
-static int stlc45xx_txbuffer_add(struct stlc45xx *stlc,
- struct txbuffer *txbuffer)
-{
- struct txbuffer *r, *prev = NULL;
-
- if (list_empty(&stlc->txbuffer)) {
- list_add(&txbuffer->buffer_list, &stlc->txbuffer);
- return 0;
- }
-
- r = list_first_entry(&stlc->txbuffer, struct txbuffer, buffer_list);
-
- if (txbuffer->start < r->start) {
- /* add to the beginning of the list */
- list_add(&txbuffer->buffer_list, &stlc->txbuffer);
- return 0;
- }
-
- prev = NULL;
- list_for_each_entry(r, &stlc->txbuffer, buffer_list) {
- /* skip first entry, we checked for that above */
- if (!prev) {
- prev = r;
- continue;
- }
-
- /* double-check overlaps */
- WARN_ON_ONCE(txbuffer->start >= r->start &&
- txbuffer->start <= r->end);
- WARN_ON_ONCE(txbuffer->end >= r->start &&
- txbuffer->end <= r->end);
-
- if (prev->end < txbuffer->start &&
- txbuffer->end < r->start) {
- /* insert at this spot */
- list_add_tail(&txbuffer->buffer_list, &r->buffer_list);
- return 0;
- }
-
- prev = r;
- }
-
- /* not found */
- list_add_tail(&txbuffer->buffer_list, &stlc->txbuffer);
-
- return 0;
-
-}
-
-/* caller must hold tx_lock */
-static struct txbuffer *stlc45xx_txbuffer_alloc(struct stlc45xx *stlc,
- size_t frame_len)
-{
- struct txbuffer *entry = NULL;
- size_t len;
- int pos;
-
- stlc45xx_debug(DEBUG_FUNC, "%s()", __func__);
-
- len = FIRMWARE_TXBUFFER_HEADER + frame_len + FIRMWARE_TXBUFFER_TRAILER;
- pos = stlc45xx_txbuffer_find(stlc, len);
-
- if (pos < 0)
- return NULL;
-
- WARN_ON_ONCE(pos + len > FIRMWARE_TXBUFFER_END);
- WARN_ON_ONCE(pos < FIRMWARE_TXBUFFER_START);
-
- entry = kmalloc(sizeof(*entry), GFP_ATOMIC);
- entry->start = pos;
- entry->frame_start = pos + FIRMWARE_TXBUFFER_HEADER;
- entry->end = entry->start + len - 1;
-
- stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: allocated 0x%x-0x%x",
- entry->start, entry->end);
-
- stlc45xx_txbuffer_add(stlc, entry);
-
- stlc45xx_txbuffer_dump(stlc);
-
- return entry;
-}
-
-/* caller must hold tx_lock */
-static void stlc45xx_txbuffer_free(struct stlc45xx *stlc,
- struct txbuffer *txbuffer)
-{
- stlc45xx_debug(DEBUG_FUNC, "%s()", __func__);
-
- stlc45xx_debug(DEBUG_TXBUFFER, "txbuffer: freed 0x%x-0x%x",
- txbuffer->start, txbuffer->end);
-
- list_del(&txbuffer->buffer_list);
- kfree(txbuffer);
-}
-
-
-static int stlc45xx_wait_bit(struct stlc45xx *stlc, u16 reg, u32 mask,
- u32 expected)
-{
- int i;
- char buffer[4];
-
- for (i = 0; i < 2000; i++) {
- stlc45xx_spi_read(stlc, reg, buffer, sizeof(buffer));
- if (((*(u32 *)buffer) & mask) == expected)
- return 1;
- msleep(1);
- }
-
- return 0;
-}
-
-static int stlc45xx_request_firmware(struct stlc45xx *stlc)
-{
- const struct firmware *fw;
- int ret;
-
- /* FIXME: should driver use it's own struct device? */
- ret = request_firmware(&fw, "3826.arm", &stlc->spi->dev);
-
- if (ret < 0) {
- stlc45xx_error("request_firmware() failed: %d", ret);
- return ret;
- }
-
- if (fw->size % 4) {
- stlc45xx_error("firmware size is not multiple of 32bit: %zu",
- fw->size);
- return -EILSEQ; /* Illegal byte sequence */;
- }
-
- if (fw->size < 1000) {
- stlc45xx_error("firmware is too small: %zu", fw->size);
- return -EILSEQ;
- }
-
- stlc->fw = kmemdup(fw->data, fw->size, GFP_KERNEL);
- if (!stlc->fw) {
- stlc45xx_error("could not allocate memory for firmware");
- return -ENOMEM;
- }
-
- stlc->fw_len = fw->size;
-
- release_firmware(fw);
-
- return 0;
-}
-
-static int stlc45xx_upload_firmware(struct stlc45xx *stlc)
-{
- struct s_dma_regs dma_regs;
- unsigned long fw_len, fw_addr;
- long _fw_len;
- int ret;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- if (!stlc->fw) {
- ret = stlc45xx_request_firmware(stlc);
- if (ret < 0)
- return ret;
- }
-
- /* stop the device */
- stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT,
- SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET
- | SPI_CTRL_STAT_START_HALTED);
-
- msleep(TARGET_BOOT_SLEEP);
-
- stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT,
- SPI_CTRL_STAT_HOST_OVERRIDE
- | SPI_CTRL_STAT_START_HALTED);
-
- msleep(TARGET_BOOT_SLEEP);
-
- fw_addr = FIRMWARE_ADDRESS;
- fw_len = stlc->fw_len;
-
- while (fw_len > 0) {
- _fw_len = (fw_len > SPI_MAX_PACKET_SIZE)
- ? SPI_MAX_PACKET_SIZE : fw_len;
- dma_regs.cmd = SPI_DMA_WRITE_CTRL_ENABLE;
- dma_regs.len = cpu_to_le16(_fw_len);
- dma_regs.addr = cpu_to_le32(fw_addr);
-
- fw_len -= _fw_len;
- fw_addr += _fw_len;
-
- stlc45xx_write16(stlc, SPI_ADRS_DMA_WRITE_CTRL, dma_regs.cmd);
-
- if (stlc45xx_wait_bit(stlc, SPI_ADRS_DMA_WRITE_CTRL,
- HOST_ALLOWED, HOST_ALLOWED) == 0) {
- stlc45xx_error("fw_upload not allowed to DMA write");
- return -EAGAIN;
- }
-
- stlc45xx_write16(stlc, SPI_ADRS_DMA_WRITE_LEN, dma_regs.len);
- stlc45xx_write32(stlc, SPI_ADRS_DMA_WRITE_BASE, dma_regs.addr);
-
- stlc45xx_spi_write(stlc, SPI_ADRS_DMA_DATA, stlc->fw, _fw_len);
-
- /* FIXME: I think this doesn't work if firmware is large,
- * this loop goes to second round. fw->data is not
- * increased at all! */
- }
-
- BUG_ON(fw_len != 0);
-
- /* enable host interrupts */
- stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_EN, SPI_HOST_INTS_DEFAULT);
-
- /* boot the device */
- stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT,
- SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_HOST_RESET
- | SPI_CTRL_STAT_RAM_BOOT);
-
- msleep(TARGET_BOOT_SLEEP);
-
- stlc45xx_write16(stlc, SPI_ADRS_DEV_CTRL_STAT,
- SPI_CTRL_STAT_HOST_OVERRIDE | SPI_CTRL_STAT_RAM_BOOT);
- msleep(TARGET_BOOT_SLEEP);
-
- return 0;
-}
-
-/* caller must hold tx_lock */
-static void stlc45xx_check_txsent(struct stlc45xx *stlc)
-{
- struct txbuffer *entry, *n;
-
- list_for_each_entry_safe(entry, n, &stlc->tx_sent, tx_list) {
- if (time_after(jiffies, entry->lifetime)) {
- if (net_ratelimit())
- stlc45xx_warning("frame 0x%x lifetime exceeded",
- entry->start);
- list_del(&entry->tx_list);
- skb_pull(entry->skb, entry->header_len);
- ieee80211_tx_status(stlc->hw, entry->skb);
- stlc45xx_txbuffer_free(stlc, entry);
- }
- }
-}
-
-static void stlc45xx_power_off(struct stlc45xx *stlc)
-{
- disable_irq(gpio_to_irq(stlc45xx_gpio_irq));
- gpio_set_value(stlc45xx_gpio_power, 0);
-}
-
-static void stlc45xx_power_on(struct stlc45xx *stlc)
-{
- gpio_set_value(stlc45xx_gpio_power, 1);
- enable_irq(gpio_to_irq(stlc45xx_gpio_irq));
-
- /*
- * need to wait a while before device can be accessed, the length
- * is just a guess
- */
- msleep(10);
-}
-
-/* caller must hold tx_lock */
-static void stlc45xx_flush_queues(struct stlc45xx *stlc)
-{
- struct txbuffer *entry;
-
- while (!list_empty(&stlc->tx_sent)) {
- entry = list_first_entry(&stlc->tx_sent,
- struct txbuffer, tx_list);
- list_del(&entry->tx_list);
- dev_kfree_skb(entry->skb);
- stlc45xx_txbuffer_free(stlc, entry);
- }
-
- WARN_ON(!list_empty(&stlc->tx_sent));
-
- while (!list_empty(&stlc->tx_pending)) {
- entry = list_first_entry(&stlc->tx_pending,
- struct txbuffer, tx_list);
- list_del(&entry->tx_list);
- dev_kfree_skb(entry->skb);
- stlc45xx_txbuffer_free(stlc, entry);
- }
-
- WARN_ON(!list_empty(&stlc->tx_pending));
- WARN_ON(!list_empty(&stlc->txbuffer));
-}
-
-static void stlc45xx_work_reset(struct work_struct *work)
-{
- struct stlc45xx *stlc = container_of(work, struct stlc45xx,
- work_reset);
-
- mutex_lock(&stlc->mutex);
-
- if (stlc->fw_state != FW_STATE_RESET)
- goto out;
-
- stlc45xx_power_off(stlc);
-
- mutex_unlock(&stlc->mutex);
-
- /* wait that all work_structs have finished, we can't hold
- * stlc->mutex to avoid deadlock */
- cancel_work_sync(&stlc->work);
-
- /* FIXME: find out good value to wait for chip power down */
- msleep(100);
-
- mutex_lock(&stlc->mutex);
-
- /* FIXME: we should gracefully handle if the state has changed
- * after re-acquiring mutex */
- WARN_ON(stlc->fw_state != FW_STATE_RESET);
-
- spin_lock_bh(&stlc->tx_lock);
- stlc45xx_flush_queues(stlc);
- spin_unlock_bh(&stlc->tx_lock);
-
- stlc->fw_state = FW_STATE_RESETTING;
-
- stlc45xx_power_on(stlc);
- stlc45xx_upload_firmware(stlc);
-
-out:
- mutex_unlock(&stlc->mutex);
-}
-
-/* caller must hold mutex */
-static void stlc45xx_reset(struct stlc45xx *stlc)
-{
- stlc45xx_warning("resetting firmware");
- stlc->fw_state = FW_STATE_RESET;
- ieee80211_stop_queues(stlc->hw);
- queue_work(stlc->hw->workqueue, &stlc->work_reset);
-}
-
-static void stlc45xx_work_tx_timeout(struct work_struct *work)
-{
- struct stlc45xx *stlc = container_of(work, struct stlc45xx,
- work_tx_timeout.work);
-
- stlc45xx_warning("tx timeout");
-
- mutex_lock(&stlc->mutex);
-
- if (stlc->fw_state != FW_STATE_READY)
- goto out;
-
- stlc45xx_reset(stlc);
-
-out:
- mutex_unlock(&stlc->mutex);
-}
-
-static void stlc45xx_int_ack(struct stlc45xx *stlc, u32 val)
-{
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_ACK, val);
-}
-
-static void stlc45xx_wakeup(struct stlc45xx *stlc)
-{
- unsigned long timeout;
- u32 ints;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- /* wake the chip */
- stlc45xx_write32(stlc, SPI_ADRS_ARM_INTERRUPTS, SPI_TARGET_INT_WAKEUP);
-
- /* And wait for the READY interrupt */
- timeout = jiffies + HZ;
-
- ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS);
- while (!(ints & SPI_HOST_INT_READY)) {
- if (time_after(jiffies, timeout))
- goto out;
- ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS);
- }
-
- stlc45xx_int_ack(stlc, SPI_HOST_INT_READY);
-
-out:
- return;
-}
-
-static void stlc45xx_sleep(struct stlc45xx *stlc)
-{
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- stlc45xx_write32(stlc, SPI_ADRS_ARM_INTERRUPTS, SPI_TARGET_INT_SLEEP);
-}
-
-static void stlc45xx_int_ready(struct stlc45xx *stlc)
-{
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- stlc45xx_write32(stlc, SPI_ADRS_HOST_INT_EN,
- SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE);
-
- switch (stlc->fw_state) {
- case FW_STATE_BOOTING:
- stlc->fw_state = FW_STATE_READY;
- complete(&stlc->fw_comp);
- break;
- case FW_STATE_RESETTING:
- stlc->fw_state = FW_STATE_READY;
-
- stlc45xx_tx_scan(stlc);
- stlc45xx_tx_setup(stlc);
- stlc45xx_tx_edcf(stlc);
-
- ieee80211_wake_queues(stlc->hw);
- break;
- default:
- break;
- }
-}
-
-static int stlc45xx_rx_txack(struct stlc45xx *stlc, struct sk_buff *skb)
-{
- struct ieee80211_tx_info *info;
- struct s_lm_control *control;
- struct s_lmo_tx *tx;
- struct txbuffer *entry;
- int found = 0;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- control = (struct s_lm_control *) skb->data;
- tx = (struct s_lmo_tx *) (control + 1);
-
- if (list_empty(&stlc->tx_sent)) {
- if (net_ratelimit())
- stlc45xx_warning("no frames waiting for "
- "acknowledgement");
- return -1;
- }
-
- list_for_each_entry(entry, &stlc->tx_sent, tx_list) {
- if (control->handle == entry->handle) {
- found = 1;
- break;
- }
- }
-
- if (!found) {
- if (net_ratelimit())
- stlc45xx_warning("couldn't find frame for tx ack 0x%x",
- control->handle);
- return -1;
- }
-
- stlc45xx_debug(DEBUG_TX, "TX ACK 0x%x", entry->handle);
-
- if (entry->status_needed) {
- info = IEEE80211_SKB_CB(entry->skb);
-
- if (!(tx->flags & LM_TX_FAILED)) {
- /* frame was acked */
- info->flags |= IEEE80211_TX_STAT_ACK;
- info->status.ack_signal = tx->rcpi / 2 - 110;
- }
-
- skb_pull(entry->skb, entry->header_len);
-
- ieee80211_tx_status(stlc->hw, entry->skb);
- }
-
- list_del(&entry->tx_list);
-
- stlc45xx_check_txsent(stlc);
- if (list_empty(&stlc->tx_sent))
- /* there are no pending frames, we can stop the tx timeout
- * timer */
- cancel_delayed_work(&stlc->work_tx_timeout);
-
- spin_lock_bh(&stlc->tx_lock);
-
- stlc45xx_txbuffer_free(stlc, entry);
-
- if (stlc->tx_queue_stopped &&
- stlc45xx_txbuffer_find(stlc, MAX_FRAME_LEN) != -1) {
- stlc45xx_debug(DEBUG_QUEUE, "room in tx buffer, waking queues");
- ieee80211_wake_queues(stlc->hw);
- stlc->tx_queue_stopped = 0;
- }
-
- spin_unlock_bh(&stlc->tx_lock);
-
- return 0;
-}
-
-static int stlc45xx_rx_control(struct stlc45xx *stlc, struct sk_buff *skb)
-{
- struct s_lm_control *control;
- int ret = 0;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- control = (struct s_lm_control *) skb->data;
-
- switch (control->oid) {
- case LM_OID_TX:
- ret = stlc45xx_rx_txack(stlc, skb);
- break;
- case LM_OID_SETUP:
- case LM_OID_SCAN:
- case LM_OID_TRAP:
- case LM_OID_EDCF:
- case LM_OID_KEYCACHE:
- case LM_OID_PSM:
- case LM_OID_STATS:
- case LM_OID_LED:
- default:
- stlc45xx_warning("unhandled rx control oid %d\n",
- control->oid);
- break;
- }
-
- dev_kfree_skb(skb);
-
- return ret;
-}
-
-/* copied from mac80211 */
-static void stlc45xx_parse_elems(u8 *start, size_t len,
- struct stlc45xx_ie_tim **tim,
- size_t *tim_len)
-{
- size_t left = len;
- u8 *pos = start;
-
- while (left >= 2) {
- u8 id, elen;
-
- id = *pos++;
- elen = *pos++;
- left -= 2;
-
- if (elen > left)
- return;
-
- switch (id) {
- case WLAN_EID_TIM:
- *tim = (struct stlc45xx_ie_tim *) pos;
- *tim_len = elen;
- break;
- default:
- break;
- }
-
- left -= elen;
- pos += elen;
- }
-}
-
-/*
- * mac80211 doesn't have support for asking frames with PS-Poll, so let's
- * implement in the driver for now. We have to add support to mac80211
- * later.
- */
-static int stlc45xx_check_more_data(struct stlc45xx *stlc, struct sk_buff *skb)
-{
- struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data;
- struct ieee80211_hdr *hdr;
- size_t len;
- u16 fc;
-
- hdr = (void *) skb->data + sizeof(*data);
- len = skb->len - sizeof(*data);
-
- /* minimum frame length is the null frame length 24 bytes */
- if (len < 24) {
- stlc45xx_warning("invalid frame length when checking for "
- "more data");
- return -EINVAL;
- }
-
- fc = le16_to_cpu(hdr->frame_control);
- if (!(fc & IEEE80211_FCTL_FROMDS))
- /* this is not from DS */
- return 0;
-
- if (compare_ether_addr(hdr->addr1, stlc->mac_addr) != 0)
- /* the frame was not for us */
- return 0;
-
- if (!(fc & IEEE80211_FCTL_MOREDATA)) {
- /* AP has no more frames buffered for us */
- stlc45xx_debug(DEBUG_PSM, "all buffered frames retrieved");
- stlc->pspolling = false;
- return 0;
- }
-
- /* MOREDATA bit is set, let's ask for a new frame from the AP */
- stlc45xx_tx_pspoll(stlc, stlc->psm);
-
- return 0;
-}
-
-/*
- * mac80211 cannot read TIM from beacons, so let's add a hack to the
- * driver. We have to add support to mac80211 later.
- */
-static int stlc45xx_rx_data_beacon(struct stlc45xx *stlc, struct sk_buff *skb)
-{
- struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data;
- size_t len = skb->len, tim_len = 0, baselen, pvbmap_len;
- struct ieee80211_mgmt *mgmt;
- struct stlc45xx_ie_tim *tim = NULL;
- int bmap_offset, index, aid_bit;
-
- mgmt = (void *) skb->data + sizeof(*data);
-
- baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
- if (baselen > len) {
- stlc45xx_warning("invalid baselen in beacon");
- return -EINVAL;
- }
-
- stlc45xx_parse_elems(mgmt->u.beacon.variable, len - baselen, &tim,
- &tim_len);
-
- if (!tim) {
- stlc45xx_warning("didn't find tim from a beacon");
- return -EINVAL;
- }
-
- bmap_offset = tim->bmap_control & 0xfe;
- index = stlc->aid / 8 - bmap_offset;
-
- pvbmap_len = tim_len - 3;
- if (index > pvbmap_len)
- return -EINVAL;
-
- aid_bit = !!(tim->pvbmap[index] & (1 << stlc->aid % 8));
-
- stlc45xx_debug(DEBUG_PSM, "fc 0x%x duration %d seq %d dtim %u "
- "bmap_control 0x%x aid_bit %d",
- mgmt->frame_control, mgmt->duration, mgmt->seq_ctrl >> 4,
- tim->dtim_count, tim->bmap_control, aid_bit);
-
- if (!aid_bit)
- return 0;
-
- stlc->pspolling = true;
- stlc45xx_tx_pspoll(stlc, stlc->psm);
-
- return 0;
-}
-
-static int stlc45xx_rx_data(struct stlc45xx *stlc, struct sk_buff *skb)
-{
- struct ieee80211_rx_status status;
- struct s_lm_data_in *data = (struct s_lm_data_in *) skb->data;
- int align = 0;
- u8 *p, align_len;
- u16 len;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- if (stlc->psm) {
- if (data->flags & LM_IN_BEACON)
- stlc45xx_rx_data_beacon(stlc, skb);
- else if (stlc->pspolling && (data->flags & LM_IN_DATA))
- stlc45xx_check_more_data(stlc, skb);
- }
-
- memset(&status, 0, sizeof(status));
-
- status.freq = data->frequency;
- status.signal = data->rcpi / 2 - 110;
-
- /* let's assume that maximum rcpi value is 140 (= 35 dBm) */
- status.qual = data->rcpi * 100 / 140;
-
- status.band = IEEE80211_BAND_2GHZ;
-
- /*
- * FIXME: this gives warning from __ieee80211_rx()
- *
- * status.rate_idx = data->rate;
- */
-
- len = data->length;
-
- if (data->flags & LM_FLAG_ALIGN)
- align = 1;
-
- skb_pull(skb, sizeof(*data));
-
- if (align) {
- p = skb->data;
- align_len = *p;
- skb_pull(skb, align_len);
- }
-
- skb_trim(skb, len);
-
- stlc45xx_debug(DEBUG_RX, "rx data 0x%p %d B", skb->data, skb->len);
- stlc45xx_dump(DEBUG_RX_CONTENT, skb->data, skb->len);
-
- memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
- ieee80211_rx(stlc->hw, skb);
-
- return 0;
-}
-
-
-
-static int stlc45xx_rx(struct stlc45xx *stlc)
-{
- struct s_lm_control *control;
- struct sk_buff *skb;
- int ret;
- u16 len;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- stlc45xx_wakeup(stlc);
-
- /* dummy read to flush SPI DMA controller bug */
- stlc45xx_read16(stlc, SPI_ADRS_GEN_PURP_1);
-
- len = stlc45xx_read16(stlc, SPI_ADRS_DMA_DATA);
-
- if (len == 0) {
- stlc45xx_warning("rx request of zero bytes");
- return 0;
- }
-
- skb = dev_alloc_skb(len);
- if (!skb) {
- stlc45xx_warning("could not alloc skb");
- return 0;
- }
-
- stlc45xx_spi_read(stlc, SPI_ADRS_DMA_DATA, skb_put(skb, len), len);
-
- stlc45xx_sleep(stlc);
-
- stlc45xx_debug(DEBUG_RX, "rx frame 0x%p %d B", skb->data, skb->len);
- stlc45xx_dump(DEBUG_RX_CONTENT, skb->data, skb->len);
-
- control = (struct s_lm_control *) skb->data;
-
- if (control->flags & LM_FLAG_CONTROL)
- ret = stlc45xx_rx_control(stlc, skb);
- else
- ret = stlc45xx_rx_data(stlc, skb);
-
- return ret;
-}
-
-
-static irqreturn_t stlc45xx_interrupt(int irq, void *config)
-{
- struct spi_device *spi = config;
- struct stlc45xx *stlc = dev_get_drvdata(&spi->dev);
-
- stlc45xx_debug(DEBUG_IRQ, "IRQ");
-
- queue_work(stlc->hw->workqueue, &stlc->work);
-
- return IRQ_HANDLED;
-}
-
-static int stlc45xx_tx_frame(struct stlc45xx *stlc, u32 address,
- void *buf, size_t len)
-{
- struct s_dma_regs dma_regs;
- unsigned long timeout;
- int ret = 0;
- u32 ints;
-
- stlc->tx_frames++;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- stlc45xx_debug(DEBUG_TX, "tx frame 0x%p %zu B", buf, len);
- stlc45xx_dump(DEBUG_TX_CONTENT, buf, len);
-
- stlc45xx_wakeup(stlc);
-
- dma_regs.cmd = SPI_DMA_WRITE_CTRL_ENABLE;
- dma_regs.len = cpu_to_le16(len);
- dma_regs.addr = cpu_to_le32(address);
-
- stlc45xx_spi_write(stlc, SPI_ADRS_DMA_WRITE_CTRL, &dma_regs,
- sizeof(dma_regs));
-
- stlc45xx_spi_write(stlc, SPI_ADRS_DMA_DATA, buf, len);
-
- timeout = jiffies + 2 * HZ;
- ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS);
- while (!(ints & SPI_HOST_INT_WR_READY)) {
- if (time_after(jiffies, timeout)) {
- stlc45xx_warning("WR_READY timeout");
- ret = -1;
- goto out;
- }
- ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS);
- }
-
- stlc45xx_int_ack(stlc, SPI_HOST_INT_WR_READY);
-
- stlc45xx_sleep(stlc);
-
-out:
- return ret;
-}
-
-static int stlc45xx_wq_tx(struct stlc45xx *stlc)
-{
- struct txbuffer *entry;
- int ret = 0;
-
- spin_lock_bh(&stlc->tx_lock);
-
- while (!list_empty(&stlc->tx_pending)) {
- entry = list_entry(stlc->tx_pending.next,
- struct txbuffer, tx_list);
-
- list_del_init(&entry->tx_list);
-
- spin_unlock_bh(&stlc->tx_lock);
-
- ret = stlc45xx_tx_frame(stlc, entry->frame_start,
- entry->skb->data, entry->skb->len);
-
- spin_lock_bh(&stlc->tx_lock);
-
- if (ret < 0) {
- /* frame transfer to firmware buffer failed */
- /* FIXME: report this to mac80211 */
- dev_kfree_skb(entry->skb);
- stlc45xx_txbuffer_free(stlc, entry);
- goto out;
- }
-
- list_add(&entry->tx_list, &stlc->tx_sent);
- queue_delayed_work(stlc->hw->workqueue,
- &stlc->work_tx_timeout,
- msecs_to_jiffies(TX_TIMEOUT));
- }
-
-out:
- spin_unlock_bh(&stlc->tx_lock);
- return ret;
-}
-
-static void stlc45xx_work(struct work_struct *work)
-{
- struct stlc45xx *stlc = container_of(work, struct stlc45xx, work);
- u32 ints;
- int ret;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- mutex_lock(&stlc->mutex);
-
- if (stlc->fw_state == FW_STATE_OFF &&
- stlc->fw_state == FW_STATE_RESET)
- goto out;
-
- ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS);
- stlc45xx_debug(DEBUG_BH, "begin host_ints 0x%08x", ints);
-
- if (ints & SPI_HOST_INT_READY) {
- stlc45xx_int_ready(stlc);
- stlc45xx_int_ack(stlc, SPI_HOST_INT_READY);
- }
-
- if (stlc->fw_state != FW_STATE_READY)
- goto out;
-
- if (ints & SPI_HOST_INT_UPDATE) {
- stlc45xx_int_ack(stlc, SPI_HOST_INT_UPDATE);
- ret = stlc45xx_rx(stlc);
- if (ret < 0) {
- stlc45xx_reset(stlc);
- goto out;
- }
- }
- if (ints & SPI_HOST_INT_SW_UPDATE) {
- stlc45xx_int_ack(stlc, SPI_HOST_INT_SW_UPDATE);
- ret = stlc45xx_rx(stlc);
- if (ret < 0) {
- stlc45xx_reset(stlc);
- goto out;
- }
- }
-
- ret = stlc45xx_wq_tx(stlc);
- if (ret < 0) {
- stlc45xx_reset(stlc);
- goto out;
- }
-
- ints = stlc45xx_read32(stlc, SPI_ADRS_HOST_INTERRUPTS);
- stlc45xx_debug(DEBUG_BH, "end host_ints 0x%08x", ints);
-
-out:
- mutex_unlock(&stlc->mutex);
-}
-
-static void stlc45xx_tx_edcf(struct stlc45xx *stlc)
-{
- struct s_lm_control *control;
- struct s_lmo_edcf *edcf;
- size_t len, edcf_len;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- edcf_len = sizeof(*edcf);
- len = sizeof(*control) + edcf_len;
- control = kzalloc(len, GFP_KERNEL);
- edcf = (struct s_lmo_edcf *) (control + 1);
-
- control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET;
- control->length = edcf_len;
- control->oid = LM_OID_EDCF;
-
- edcf->slottime = 0x14;
- edcf->sifs = 10;
- edcf->eofpad = 6;
- edcf->maxburst = 1500;
-
- edcf->queues[0].aifs = 2;
- edcf->queues[0].pad0 = 1;
- edcf->queues[0].cwmin = 3;
- edcf->queues[0].cwmax = 7;
- edcf->queues[0].txop = 47;
- edcf->queues[1].aifs = 2;
- edcf->queues[1].pad0 = 0;
- edcf->queues[1].cwmin = 7;
- edcf->queues[1].cwmax = 15;
- edcf->queues[1].txop = 94;
- edcf->queues[2].aifs = 3;
- edcf->queues[2].pad0 = 0;
- edcf->queues[2].cwmin = 15;
- edcf->queues[2].cwmax = 1023;
- edcf->queues[2].txop = 0;
- edcf->queues[3].aifs = 7;
- edcf->queues[3].pad0 = 0;
- edcf->queues[3].cwmin = 15;
- edcf->queues[3].cwmax = 1023;
- edcf->queues[3].txop = 0;
- edcf->queues[4].aifs = 13;
- edcf->queues[4].pad0 = 99;
- edcf->queues[4].cwmin = 3437;
- edcf->queues[4].cwmax = 512;
- edcf->queues[4].txop = 12;
- edcf->queues[5].aifs = 142;
- edcf->queues[5].pad0 = 109;
- edcf->queues[5].cwmin = 8756;
- edcf->queues[5].cwmax = 6;
- edcf->queues[5].txop = 0;
- edcf->queues[6].aifs = 4;
- edcf->queues[6].pad0 = 0;
- edcf->queues[6].cwmin = 0;
- edcf->queues[6].cwmax = 58705;
- edcf->queues[6].txop = 25716;
- edcf->queues[7].aifs = 0;
- edcf->queues[7].pad0 = 0;
- edcf->queues[7].cwmin = 0;
- edcf->queues[7].cwmax = 0;
- edcf->queues[7].txop = 0;
-
- stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len);
-
- kfree(control);
-}
-
-static void stlc45xx_tx_setup(struct stlc45xx *stlc)
-{
- struct s_lm_control *control;
- struct s_lmo_setup *setup;
- size_t len, setup_len;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- setup_len = sizeof(*setup);
- len = sizeof(*control) + setup_len;
- control = kzalloc(len, GFP_KERNEL);
- setup = (struct s_lmo_setup *) (control + 1);
-
- control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET;
- control->length = setup_len;
- control->oid = LM_OID_SETUP;
-
- setup->flags = LM_SETUP_INFRA;
- setup->antenna = 2;
- setup->rx_align = 0;
- setup->rx_buffer = FIRMWARE_RXBUFFER_START;
- setup->rx_mtu = FIRMWARE_MTU;
- setup->frontend = 5;
- setup->timeout = 0;
- setup->truncate = 48896;
- setup->bratemask = 0xffffffff;
- setup->ref_clock = 644245094;
- setup->lpf_bandwidth = 65535;
- setup->osc_start_delay = 65535;
-
- memcpy(setup->macaddr, stlc->mac_addr, ETH_ALEN);
- memcpy(setup->bssid, stlc->bssid, ETH_ALEN);
-
- stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len);
-
- kfree(control);
-}
-
-static void stlc45xx_tx_scan(struct stlc45xx *stlc)
-{
- struct s_lm_control *control;
- struct s_lmo_scan *scan;
- size_t len, scan_len;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- scan_len = sizeof(*scan);
- len = sizeof(*control) + scan_len;
- control = kzalloc(len, GFP_KERNEL);
- scan = (struct s_lmo_scan *) (control + 1);
-
- control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET;
- control->length = scan_len;
- control->oid = LM_OID_SCAN;
-
- scan->flags = LM_SCAN_EXIT;
- scan->bratemask = 0x15f;
- scan->aloft[0] = 3;
- scan->aloft[1] = 3;
- scan->aloft[2] = 1;
- scan->aloft[3] = 0;
- scan->aloft[4] = 0;
- scan->aloft[5] = 0;
- scan->aloft[6] = 0;
- scan->aloft[7] = 0;
-
- memcpy(&scan->rssical, &stlc->cal_rssi[(stlc->channel - 1) *
- RSSI_CAL_LEN],
- RSSI_CAL_LEN);
- memcpy(&scan->channel, &stlc->cal_channels[(stlc->channel - 1) *
- CHANNEL_CAL_LEN],
- CHANNEL_CAL_LEN);
-
- stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len);
-
- kfree(control);
-}
-
-/*
- * caller must hold mutex
- */
-static int stlc45xx_tx_pspoll(struct stlc45xx *stlc, bool powersave)
-{
- struct ieee80211_hdr *pspoll;
- int payload_len, padding, i;
- struct s_lm_data_out *data;
- struct txbuffer *entry;
- struct sk_buff *skb;
- char *payload;
- u16 fc;
-
- skb = dev_alloc_skb(stlc->hw->extra_tx_headroom + 16);
- if (!skb) {
- stlc45xx_warning("failed to allocate pspoll frame");
- return -ENOMEM;
- }
- skb_reserve(skb, stlc->hw->extra_tx_headroom);
-
- pspoll = (struct ieee80211_hdr *) skb_put(skb, 16);
- memset(pspoll, 0, 16);
- fc = IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL;
- if (powersave)
- fc |= IEEE80211_FCTL_PM;
- pspoll->frame_control = cpu_to_le16(fc);
- pspoll->duration_id = cpu_to_le16(stlc->aid);
-
- /* aid in PS-Poll has its two MSBs each set to 1 */
- pspoll->duration_id |= cpu_to_le16(1 << 15) | cpu_to_le16(1 << 14);
-
- memcpy(pspoll->addr1, stlc->bssid, ETH_ALEN);
- memcpy(pspoll->addr2, stlc->mac_addr, ETH_ALEN);
-
- stlc45xx_debug(DEBUG_PSM, "sending PS-Poll frame to %pM (powersave %d, "
- "fc 0x%x, aid %d)", pspoll->addr1,
- powersave, fc, stlc->aid);
-
- spin_lock_bh(&stlc->tx_lock);
-
- entry = stlc45xx_txbuffer_alloc(stlc, skb->len);
-
- spin_unlock_bh(&stlc->tx_lock);
-
- if (!entry) {
- /*
- * The queue should be stopped before the firmware buffer
- * is full, so firmware buffer should always have enough
- * space.
- *
- * But I'm too lazy and omit it for now.
- */
- if (net_ratelimit())
- stlc45xx_warning("firmware tx buffer full is full "
- "for null frame");
- return -ENOSPC;
- }
-
- payload = skb->data;
- payload_len = skb->len;
- padding = (int) (skb->data - sizeof(*data)) & 3;
- entry->header_len = sizeof(*data) + padding;
-
- entry->skb = skb;
- entry->status_needed = false;
- entry->handle = (u32) skb;
- entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME);
-
- stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B "
- "padding %d header_len %d)",
- entry->handle, payload, payload_len, padding,
- entry->header_len);
- stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len);
-
- data = (struct s_lm_data_out *) skb_push(skb, entry->header_len);
-
- memset(data, 0, entry->header_len);
-
- if (padding)
- data->flags = LM_FLAG_ALIGN;
-
- data->flags = LM_OUT_BURST;
- data->length = payload_len;
- data->handle = entry->handle;
- data->aid = 1;
- data->rts_retries = 7;
- data->retries = 7;
- data->aloft_ctrl = 0;
- data->crypt_offset = 58;
- data->keytype = 0;
- data->keylen = 0;
- data->queue = LM_QUEUE_DATA3;
- data->backlog = 32;
- data->antenna = 2;
- data->cts = 3;
- data->power = 127;
-
- for (i = 0; i < 8; i++)
- data->aloft[i] = 0;
-
- /*
- * check if there's enough space in tx buffer
- *
- * FIXME: ignored for now
- */
-
- stlc45xx_tx_frame(stlc, entry->start, skb->data, skb->len);
-
- list_add(&entry->tx_list, &stlc->tx_sent);
-
- return 0;
-}
-
-/*
- * caller must hold mutex
- *
- * shamelessly stolen from mac80211/ieee80211_send_nullfunc
- */
-static int stlc45xx_tx_nullfunc(struct stlc45xx *stlc, bool powersave)
-{
- struct ieee80211_hdr *nullfunc;
- int payload_len, padding, i;
- struct s_lm_data_out *data;
- struct txbuffer *entry;
- struct sk_buff *skb;
- char *payload;
- u16 fc;
-
- skb = dev_alloc_skb(stlc->hw->extra_tx_headroom + 24);
- if (!skb) {
- stlc45xx_warning("failed to allocate buffer for null frame\n");
- return -ENOMEM;
- }
- skb_reserve(skb, stlc->hw->extra_tx_headroom);
-
- nullfunc = (struct ieee80211_hdr *) skb_put(skb, 24);
- memset(nullfunc, 0, 24);
- fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
- IEEE80211_FCTL_TODS;
-
- if (powersave)
- fc |= IEEE80211_FCTL_PM;
-
- nullfunc->frame_control = cpu_to_le16(fc);
- memcpy(nullfunc->addr1, stlc->bssid, ETH_ALEN);
- memcpy(nullfunc->addr2, stlc->mac_addr, ETH_ALEN);
- memcpy(nullfunc->addr3, stlc->bssid, ETH_ALEN);
-
- stlc45xx_debug(DEBUG_PSM, "sending Null frame to %pM (powersave %d, "
- "fc 0x%x)", nullfunc->addr1, powersave, fc);
-
- spin_lock_bh(&stlc->tx_lock);
-
- entry = stlc45xx_txbuffer_alloc(stlc, skb->len);
-
- spin_unlock_bh(&stlc->tx_lock);
-
- if (!entry) {
- /*
- * The queue should be stopped before the firmware buffer
- * is full, so firmware buffer should always have enough
- * space.
- *
- * But I'm too lazy and omit it for now.
- */
- if (net_ratelimit())
- stlc45xx_warning("firmware tx buffer full is full "
- "for null frame");
- return -ENOSPC;
- }
-
- payload = skb->data;
- payload_len = skb->len;
- padding = (int) (skb->data - sizeof(*data)) & 3;
- entry->header_len = sizeof(*data) + padding;
-
- entry->skb = skb;
- entry->status_needed = false;
- entry->handle = (u32) skb;
- entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME);
-
- stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B "
- "padding %d header_len %d)",
- entry->handle, payload, payload_len, padding,
- entry->header_len);
- stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len);
-
- data = (struct s_lm_data_out *) skb_push(skb, entry->header_len);
-
- memset(data, 0, entry->header_len);
-
- if (padding)
- data->flags = LM_FLAG_ALIGN;
-
- data->flags = LM_OUT_BURST;
- data->length = payload_len;
- data->handle = entry->handle;
- data->aid = 1;
- data->rts_retries = 7;
- data->retries = 7;
- data->aloft_ctrl = 0;
- data->crypt_offset = 58;
- data->keytype = 0;
- data->keylen = 0;
- data->queue = LM_QUEUE_DATA3;
- data->backlog = 32;
- data->antenna = 2;
- data->cts = 3;
- data->power = 127;
-
- for (i = 0; i < 8; i++)
- data->aloft[i] = 0;
-
- /*
- * check if there's enough space in tx buffer
- *
- * FIXME: ignored for now
- */
-
- stlc45xx_tx_frame(stlc, entry->start, skb->data, skb->len);
-
- list_add(&entry->tx_list, &stlc->tx_sent);
-
- return 0;
-}
-
-/* caller must hold mutex */
-static void stlc45xx_tx_psm(struct stlc45xx *stlc, bool enable)
-{
- struct s_lm_control *control;
- struct s_lmo_psm *psm;
- size_t len, psm_len;
-
- WARN_ON(!stlc->associated);
- WARN_ON(stlc->aid < 1);
- WARN_ON(stlc->aid > 2007);
-
- psm_len = sizeof(*psm);
- len = sizeof(*control) + psm_len;
- control = kzalloc(len, GFP_KERNEL);
- psm = (struct s_lmo_psm *) (control + 1);
-
- control->flags = LM_FLAG_CONTROL | LM_CTRL_OPSET;
- control->length = psm_len;
- control->oid = LM_OID_PSM;
-
- if (enable)
- psm->flags |= LM_PSM;
-
- psm->aid = stlc->aid;
-
- psm->beacon_rcpi_skip_max = 60;
-
- psm->intervals[0].interval = 1;
- psm->intervals[0].periods = 1;
- psm->intervals[1].interval = 1;
- psm->intervals[1].periods = 1;
- psm->intervals[2].interval = 1;
- psm->intervals[2].periods = 1;
- psm->intervals[3].interval = 1;
- psm->intervals[3].periods = 1;
-
- psm->nr = 0;
- psm->exclude[0] = 0;
-
- stlc45xx_debug(DEBUG_PSM, "sending LM_OID_PSM (aid %d, interval %d)",
- psm->aid, psm->intervals[0].interval);
-
- stlc45xx_tx_frame(stlc, FIRMWARE_CONFIG_START, control, len);
-
- kfree(control);
-}
-
-static int stlc45xx_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct stlc45xx *stlc = hw->priv;
- struct ieee80211_tx_info *info;
- struct ieee80211_rate *rate;
- int payload_len, padding, i;
- struct s_lm_data_out *data;
- struct txbuffer *entry;
- char *payload;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- spin_lock_bh(&stlc->tx_lock);
-
- entry = stlc45xx_txbuffer_alloc(stlc, skb->len);
- if (!entry) {
- /* the queue should be stopped before the firmware buffer
- * is full, so firmware buffer should always have enough
- * space */
- if (net_ratelimit())
- stlc45xx_warning("firmware buffer full");
- spin_unlock_bh(&stlc->tx_lock);
- return NETDEV_TX_BUSY;
- }
-
- info = IEEE80211_SKB_CB(skb);
-
- payload = skb->data;
- payload_len = skb->len;
- padding = (int) (skb->data - sizeof(*data)) & 3;
- entry->header_len = sizeof(*data) + padding;
-
- entry->skb = skb;
- entry->status_needed = true;
- entry->handle = (u32) skb;
- entry->lifetime = jiffies + msecs_to_jiffies(TX_FRAME_LIFETIME);
-
- stlc45xx_debug(DEBUG_TX, "tx data 0x%x (0x%p payload %d B "
- "padding %d header_len %d)",
- entry->handle, payload, payload_len, padding,
- entry->header_len);
- stlc45xx_dump(DEBUG_TX_CONTENT, payload, payload_len);
-
- data = (struct s_lm_data_out *) skb_push(skb, entry->header_len);
-
- memset(data, 0, entry->header_len);
-
- if (padding)
- data->flags = LM_FLAG_ALIGN;
-
- data->flags = LM_OUT_BURST;
- data->length = payload_len;
- data->handle = entry->handle;
- data->aid = 1;
- data->rts_retries = 7;
- data->retries = 7;
- data->aloft_ctrl = 0;
- data->crypt_offset = 58;
- data->keytype = 0;
- data->keylen = 0;
- data->queue = 2;
- data->backlog = 32;
- data->antenna = 2;
- data->cts = 3;
- data->power = 127;
-
- for (i = 0; i < 8; i++) {
- rate = ieee80211_get_tx_rate(stlc->hw, info);
- data->aloft[i] = rate->hw_value;
- }
-
- list_add_tail(&entry->tx_list, &stlc->tx_pending);
-
- /* check if there's enough space in tx buffer */
- if (stlc45xx_txbuffer_find(stlc, MAX_FRAME_LEN) == -1) {
- stlc45xx_debug(DEBUG_QUEUE, "tx buffer full, stopping queues");
- stlc->tx_queue_stopped = 1;
- ieee80211_stop_queues(stlc->hw);
- }
-
- queue_work(stlc->hw->workqueue, &stlc->work);
-
- spin_unlock_bh(&stlc->tx_lock);
-
- return NETDEV_TX_OK;
-}
-
-static int stlc45xx_op_start(struct ieee80211_hw *hw)
-{
- struct stlc45xx *stlc = hw->priv;
- unsigned long timeout;
- int ret = 0;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- mutex_lock(&stlc->mutex);
-
- stlc->fw_state = FW_STATE_BOOTING;
- stlc->channel = 1;
-
- stlc45xx_power_on(stlc);
-
- ret = stlc45xx_upload_firmware(stlc);
- if (ret < 0) {
- stlc45xx_power_off(stlc);
- goto out_unlock;
- }
-
- stlc->tx_queue_stopped = 0;
-
- mutex_unlock(&stlc->mutex);
-
- timeout = msecs_to_jiffies(2000);
- timeout = wait_for_completion_interruptible_timeout(&stlc->fw_comp,
- timeout);
- if (!timeout) {
- stlc45xx_error("firmware boot failed");
- stlc45xx_power_off(stlc);
- ret = -1;
- goto out;
- }
-
- stlc45xx_debug(DEBUG_BOOT, "firmware booted");
-
- /* FIXME: should we take mutex just after wait_for_completion()? */
- mutex_lock(&stlc->mutex);
-
- WARN_ON(stlc->fw_state != FW_STATE_READY);
-
-out_unlock:
- mutex_unlock(&stlc->mutex);
-
-out:
- return ret;
-}
-
-static void stlc45xx_op_stop(struct ieee80211_hw *hw)
-{
- struct stlc45xx *stlc = hw->priv;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- mutex_lock(&stlc->mutex);
-
- WARN_ON(stlc->fw_state != FW_STATE_READY);
-
- stlc45xx_power_off(stlc);
-
- /* FIXME: make sure that all work_structs have completed */
-
- spin_lock_bh(&stlc->tx_lock);
- stlc45xx_flush_queues(stlc);
- spin_unlock_bh(&stlc->tx_lock);
-
- stlc->fw_state = FW_STATE_OFF;
-
- mutex_unlock(&stlc->mutex);
-}
-
-static int stlc45xx_op_add_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
-{
- struct stlc45xx *stlc = hw->priv;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- switch (conf->type) {
- case NL80211_IFTYPE_STATION:
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- memcpy(stlc->mac_addr, conf->mac_addr, ETH_ALEN);
-
- return 0;
-}
-
-static void stlc45xx_op_remove_interface(struct ieee80211_hw *hw,
- struct ieee80211_if_init_conf *conf)
-{
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-}
-
-static int stlc45xx_op_config(struct ieee80211_hw *hw, u32 changed)
-{
- struct stlc45xx *stlc = hw->priv;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- mutex_lock(&stlc->mutex);
-
- stlc->channel = hw->conf.channel->hw_value;
- stlc45xx_tx_scan(stlc);
- stlc45xx_tx_setup(stlc);
- stlc45xx_tx_edcf(stlc);
-
- if ((hw->conf.flags & IEEE80211_CONF_PS) != stlc->psm) {
- stlc->psm = hw->conf.flags & IEEE80211_CONF_PS;
- if (stlc->associated) {
- stlc45xx_tx_psm(stlc, stlc->psm);
- stlc45xx_tx_nullfunc(stlc, stlc->psm);
- }
- }
-
- mutex_unlock(&stlc->mutex);
-
- return 0;
-}
-
-static void stlc45xx_op_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- int mc_count,
- struct dev_addr_list *mc_list)
-{
- *total_flags = 0;
-}
-
-static void stlc45xx_op_bss_info_changed(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_bss_conf *info,
- u32 changed)
-{
- struct stlc45xx *stlc = hw->priv;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
- mutex_lock(&stlc->mutex);
-
- memcpy(stlc->bssid, info->bssid, ETH_ALEN);
- stlc45xx_tx_setup(stlc);
-
- mutex_unlock(&stlc->mutex);
-
- if (changed & BSS_CHANGED_ASSOC) {
- stlc->associated = info->assoc;
- if (info->assoc)
- stlc->aid = info->aid;
- else
- stlc->aid = -1;
-
- if (stlc->psm) {
- stlc45xx_tx_psm(stlc, stlc->psm);
- stlc45xx_tx_nullfunc(stlc, stlc->psm);
- }
- }
-}
-
-
-/* can't be const, mac80211 writes to this */
-static struct ieee80211_rate stlc45xx_rates[] = {
- { .bitrate = 10, .hw_value = 0, .hw_value_short = 0, },
- { .bitrate = 20, .hw_value = 1, .hw_value_short = 1, },
- { .bitrate = 55, .hw_value = 2, .hw_value_short = 2, },
- { .bitrate = 110, .hw_value = 3, .hw_value_short = 3, },
- { .bitrate = 60, .hw_value = 4, .hw_value_short = 4, },
- { .bitrate = 90, .hw_value = 5, .hw_value_short = 5, },
- { .bitrate = 120, .hw_value = 6, .hw_value_short = 6, },
- { .bitrate = 180, .hw_value = 7, .hw_value_short = 7, },
- { .bitrate = 240, .hw_value = 8, .hw_value_short = 8, },
- { .bitrate = 360, .hw_value = 9, .hw_value_short = 9, },
- { .bitrate = 480, .hw_value = 10, .hw_value_short = 10, },
- { .bitrate = 540, .hw_value = 11, .hw_value_short = 11, },
-};
-
-/* can't be const, mac80211 writes to this */
-static struct ieee80211_channel stlc45xx_channels[] = {
- { .hw_value = 1, .center_freq = 2412},
- { .hw_value = 2, .center_freq = 2417},
- { .hw_value = 3, .center_freq = 2422},
- { .hw_value = 4, .center_freq = 2427},
- { .hw_value = 5, .center_freq = 2432},
- { .hw_value = 6, .center_freq = 2437},
- { .hw_value = 7, .center_freq = 2442},
- { .hw_value = 8, .center_freq = 2447},
- { .hw_value = 9, .center_freq = 2452},
- { .hw_value = 10, .center_freq = 2457},
- { .hw_value = 11, .center_freq = 2462},
- { .hw_value = 12, .center_freq = 2467},
- { .hw_value = 13, .center_freq = 2472},
-};
-
-/* can't be const, mac80211 writes to this */
-static struct ieee80211_supported_band stlc45xx_band_2ghz = {
- .channels = stlc45xx_channels,
- .n_channels = ARRAY_SIZE(stlc45xx_channels),
- .bitrates = stlc45xx_rates,
- .n_bitrates = ARRAY_SIZE(stlc45xx_rates),
-};
-
-static const struct ieee80211_ops stlc45xx_ops = {
- .start = stlc45xx_op_start,
- .stop = stlc45xx_op_stop,
- .add_interface = stlc45xx_op_add_interface,
- .remove_interface = stlc45xx_op_remove_interface,
- .config = stlc45xx_op_config,
- .configure_filter = stlc45xx_op_configure_filter,
- .tx = stlc45xx_op_tx,
- .bss_info_changed = stlc45xx_op_bss_info_changed,
-};
-
-static int stlc45xx_register_mac80211(struct stlc45xx *stlc)
-{
- /* FIXME: SET_IEEE80211_PERM_ADDR() requires default_mac_addr
- to be non-const for some strange reason */
- static u8 default_mac_addr[ETH_ALEN] = {
- 0x00, 0x02, 0xee, 0xc0, 0xff, 0xee
- };
- int ret;
-
- SET_IEEE80211_PERM_ADDR(stlc->hw, default_mac_addr);
-
- ret = ieee80211_register_hw(stlc->hw);
- if (ret) {
- stlc45xx_error("unable to register mac80211 hw: %d", ret);
- return ret;
- }
-
- return 0;
-}
-
-static void stlc45xx_device_release(struct device *dev)
-{
-
-}
-
-static struct platform_device stlc45xx_device = {
- .name = "stlc45xx",
- .id = -1,
-
- /* device model insists to have a release function */
- .dev = {
- .release = stlc45xx_device_release,
- },
-};
-
-static int __devinit stlc45xx_probe(struct spi_device *spi)
-{
- struct stlc45xx *stlc;
- struct ieee80211_hw *hw;
- int ret;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- /* mac80211 alloc */
- hw = ieee80211_alloc_hw(sizeof(*stlc), &stlc45xx_ops);
- if (!hw) {
- stlc45xx_error("could not alloc ieee80211_hw");
- ret = -ENOMEM;
- goto out;
- }
-
- /* mac80211 clears hw->priv */
- stlc = hw->priv;
-
- stlc->hw = hw;
- dev_set_drvdata(&spi->dev, stlc);
- stlc->spi = spi;
-
- spi->bits_per_word = 16;
- spi->max_speed_hz = 24000000;
-
- ret = spi_setup(spi);
- if (ret < 0)
- stlc45xx_error("spi_setup failed");
-
- ret = gpio_request(stlc45xx_gpio_power, "stlc45xx power");
- if (ret < 0) {
- stlc45xx_error("power GPIO request failed: %d", ret);
- return ret;
- }
-
- ret = gpio_request(stlc45xx_gpio_irq, "stlc45xx irq");
- if (ret < 0) {
- stlc45xx_error("irq GPIO request failed: %d", ret);
- goto out;
- }
-
- gpio_direction_output(stlc45xx_gpio_power, 0);
- gpio_direction_input(stlc45xx_gpio_irq);
-
- ret = request_irq(gpio_to_irq(stlc45xx_gpio_irq),
- stlc45xx_interrupt, IRQF_DISABLED, "stlc45xx",
- stlc->spi);
- if (ret < 0)
- /* FIXME: handle the error */
- stlc45xx_error("request_irq() failed");
-
- set_irq_type(gpio_to_irq(stlc45xx_gpio_irq),
- IRQ_TYPE_EDGE_RISING);
-
- disable_irq(gpio_to_irq(stlc45xx_gpio_irq));
-
- ret = platform_device_register(&stlc45xx_device);
- if (ret) {
- stlc45xx_error("Couldn't register wlan_omap device.");
- return ret;
- }
- dev_set_drvdata(&stlc45xx_device.dev, stlc);
-
- INIT_WORK(&stlc->work, stlc45xx_work);
- INIT_WORK(&stlc->work_reset, stlc45xx_work_reset);
- INIT_DELAYED_WORK(&stlc->work_tx_timeout, stlc45xx_work_tx_timeout);
- mutex_init(&stlc->mutex);
- init_completion(&stlc->fw_comp);
- spin_lock_init(&stlc->tx_lock);
- INIT_LIST_HEAD(&stlc->txbuffer);
- INIT_LIST_HEAD(&stlc->tx_pending);
- INIT_LIST_HEAD(&stlc->tx_sent);
-
- hw->flags = IEEE80211_HW_RX_INCLUDES_FCS |
- IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_NOISE_DBM;
- /* four bytes for padding */
- hw->extra_tx_headroom = sizeof(struct s_lm_data_out) + 4;
-
- /* unit us */
- hw->channel_change_time = 1000;
-
- hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
- hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &stlc45xx_band_2ghz;
-
- SET_IEEE80211_DEV(hw, &spi->dev);
-
- BUILD_BUG_ON(sizeof(default_cal_rssi) != RSSI_CAL_ARRAY_LEN);
- BUILD_BUG_ON(sizeof(default_cal_channels) != CHANNEL_CAL_ARRAY_LEN);
-
- stlc->cal_rssi = kmemdup(default_cal_rssi, RSSI_CAL_ARRAY_LEN,
- GFP_KERNEL);
- stlc->cal_channels = kmemdup(default_cal_channels,
- CHANNEL_CAL_ARRAY_LEN,
- GFP_KERNEL);
-
- ret = device_create_file(&stlc45xx_device.dev, &dev_attr_cal_rssi);
- if (ret < 0) {
- stlc45xx_error("failed to create sysfs file cal_rssi");
- goto out;
- }
-
- ret = device_create_file(&stlc45xx_device.dev, &dev_attr_cal_channels);
- if (ret < 0) {
- stlc45xx_error("failed to create sysfs file cal_channels");
- goto out;
- }
-
- ret = device_create_file(&stlc45xx_device.dev, &dev_attr_tx_buf);
- if (ret < 0) {
- stlc45xx_error("failed to create sysfs file tx_buf");
- goto out;
- }
-
- ret = stlc45xx_register_mac80211(stlc);
- if (ret < 0)
- goto out;
-
- stlc45xx_info("v" DRIVER_VERSION " loaded");
-
- stlc45xx_info("config buffer 0x%x-0x%x",
- FIRMWARE_CONFIG_START, FIRMWARE_CONFIG_END);
- stlc45xx_info("tx 0x%x-0x%x, rx 0x%x-0x%x",
- FIRMWARE_TXBUFFER_START, FIRMWARE_TXBUFFER_END,
- FIRMWARE_RXBUFFER_START, FIRMWARE_RXBUFFER_END);
-
-out:
- return ret;
-}
-
-static int __devexit stlc45xx_remove(struct spi_device *spi)
-{
- struct stlc45xx *stlc = dev_get_drvdata(&spi->dev);
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- platform_device_unregister(&stlc45xx_device);
-
- ieee80211_unregister_hw(stlc->hw);
-
- free_irq(gpio_to_irq(stlc45xx_gpio_irq), spi);
-
- gpio_free(stlc45xx_gpio_power);
- gpio_free(stlc45xx_gpio_irq);
-
- /* FIXME: free cal_channels and cal_rssi? */
-
- kfree(stlc->fw);
-
- mutex_destroy(&stlc->mutex);
-
- /* frees also stlc */
- ieee80211_free_hw(stlc->hw);
- stlc = NULL;
-
- return 0;
-}
-
-
-static struct spi_driver stlc45xx_spi_driver = {
- .driver = {
- /* use cx3110x name because board-n800.c uses that for the
- * SPI port */
- .name = "cx3110x",
- .bus = &spi_bus_type,
- .owner = THIS_MODULE,
- },
-
- .probe = stlc45xx_probe,
- .remove = __devexit_p(stlc45xx_remove),
-};
-
-static int __init stlc45xx_init(void)
-{
- int ret;
-
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- ret = spi_register_driver(&stlc45xx_spi_driver);
- if (ret < 0) {
- stlc45xx_error("failed to register SPI driver: %d", ret);
- goto out;
- }
-
-out:
- return ret;
-}
-
-static void __exit stlc45xx_exit(void)
-{
- stlc45xx_debug(DEBUG_FUNC, "%s", __func__);
-
- spi_unregister_driver(&stlc45xx_spi_driver);
-
- stlc45xx_info("unloaded");
-}
-
-module_init(stlc45xx_init);
-module_exit(stlc45xx_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
-MODULE_ALIAS("spi:cx3110x");
+++ /dev/null
-/*
- * This file is part of stlc45xx
- *
- * Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies).
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/mutex.h>
-#include <linux/list.h>
-#include <net/mac80211.h>
-
-#include "stlc45xx_lmac.h"
-
-#define DRIVER_NAME "stlc45xx"
-#define DRIVER_VERSION "0.1.3"
-
-#define DRIVER_PREFIX DRIVER_NAME ": "
-
-enum {
- DEBUG_NONE = 0,
- DEBUG_FUNC = 1 << 0,
- DEBUG_IRQ = 1 << 1,
- DEBUG_BH = 1 << 2,
- DEBUG_RX = 1 << 3,
- DEBUG_RX_CONTENT = 1 << 5,
- DEBUG_TX = 1 << 6,
- DEBUG_TX_CONTENT = 1 << 8,
- DEBUG_TXBUFFER = 1 << 9,
- DEBUG_QUEUE = 1 << 10,
- DEBUG_BOOT = 1 << 11,
- DEBUG_PSM = 1 << 12,
- DEBUG_ALL = ~0,
-};
-
-#define DEBUG_LEVEL DEBUG_NONE
-/* #define DEBUG_LEVEL DEBUG_ALL */
-/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_RX | DEBUG_IRQ) */
-/* #define DEBUG_LEVEL (DEBUG_TX | DEBUG_MEMREGION | DEBUG_QUEUE) */
-/* #define DEBUG_LEVEL (DEBUG_MEMREGION | DEBUG_QUEUE) */
-
-#define stlc45xx_error(fmt, arg...) \
- printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
-
-#define stlc45xx_warning(fmt, arg...) \
- printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
-
-#define stlc45xx_info(fmt, arg...) \
- printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
-
-#define stlc45xx_debug(level, fmt, arg...) \
- do { \
- if (level & DEBUG_LEVEL) \
- printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
- } while (0)
-
-#define stlc45xx_dump(level, buf, len) \
- do { \
- if (level & DEBUG_LEVEL) \
- print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, \
- 16, 1, buf, len, 1); \
- } while (0)
-
-#define MAC2STR(a) ((a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5])
-#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
-
-/* Bit 15 is read/write bit; ON = READ, OFF = WRITE */
-#define ADDR_READ_BIT_15 0x8000
-
-#define SPI_ADRS_ARM_INTERRUPTS 0x00
-#define SPI_ADRS_ARM_INT_EN 0x04
-
-#define SPI_ADRS_HOST_INTERRUPTS 0x08
-#define SPI_ADRS_HOST_INT_EN 0x0c
-#define SPI_ADRS_HOST_INT_ACK 0x10
-
-#define SPI_ADRS_GEN_PURP_1 0x14
-#define SPI_ADRS_GEN_PURP_2 0x18
-
-/* high word */
-#define SPI_ADRS_DEV_CTRL_STAT 0x26
-
-#define SPI_ADRS_DMA_DATA 0x28
-
-#define SPI_ADRS_DMA_WRITE_CTRL 0x2c
-#define SPI_ADRS_DMA_WRITE_LEN 0x2e
-#define SPI_ADRS_DMA_WRITE_BASE 0x30
-
-#define SPI_ADRS_DMA_READ_CTRL 0x34
-#define SPI_ADRS_DMA_READ_LEN 0x36
-#define SPI_ADRS_DMA_READ_BASE 0x38
-
-#define SPI_CTRL_STAT_HOST_OVERRIDE 0x8000
-#define SPI_CTRL_STAT_START_HALTED 0x4000
-#define SPI_CTRL_STAT_RAM_BOOT 0x2000
-#define SPI_CTRL_STAT_HOST_RESET 0x1000
-#define SPI_CTRL_STAT_HOST_CPU_EN 0x0800
-
-#define SPI_DMA_WRITE_CTRL_ENABLE 0x0001
-#define SPI_DMA_READ_CTRL_ENABLE 0x0001
-#define HOST_ALLOWED (1 << 7)
-
-#define FIRMWARE_ADDRESS 0x20000
-
-#define SPI_TIMEOUT 100 /* msec */
-
-#define SPI_MAX_TX_PACKETS 32
-
-#define SPI_MAX_PACKET_SIZE 32767
-
-#define SPI_TARGET_INT_WAKEUP 0x00000001
-#define SPI_TARGET_INT_SLEEP 0x00000002
-#define SPI_TARGET_INT_RDDONE 0x00000004
-
-#define SPI_TARGET_INT_CTS 0x00004000
-#define SPI_TARGET_INT_DR 0x00008000
-
-#define SPI_HOST_INT_READY 0x00000001
-#define SPI_HOST_INT_WR_READY 0x00000002
-#define SPI_HOST_INT_SW_UPDATE 0x00000004
-#define SPI_HOST_INT_UPDATE 0x10000000
-
-/* clear to send */
-#define SPI_HOST_INT_CTS 0x00004000
-
-/* data ready */
-#define SPI_HOST_INT_DR 0x00008000
-
-#define SPI_HOST_INTS_DEFAULT \
- (SPI_HOST_INT_READY | SPI_HOST_INT_UPDATE | SPI_HOST_INT_SW_UPDATE)
-
-#define TARGET_BOOT_SLEEP 50
-
-/* The firmware buffer is divided into three areas:
- *
- * o config area (for control commands)
- * o tx buffer
- * o rx buffer
- */
-#define FIRMWARE_BUFFER_START 0x20200
-#define FIRMWARE_BUFFER_END 0x27c60
-#define FIRMWARE_BUFFER_LEN (FIRMWARE_BUFFER_END - FIRMWARE_BUFFER_START)
-#define FIRMWARE_MTU 3240
-#define FIRMWARE_CONFIG_PAYLOAD_LEN 1024
-#define FIRMWARE_CONFIG_START FIRMWARE_BUFFER_START
-#define FIRMWARE_CONFIG_LEN (sizeof(struct s_lm_control) + \
- FIRMWARE_CONFIG_PAYLOAD_LEN)
-#define FIRMWARE_CONFIG_END (FIRMWARE_CONFIG_START + FIRMWARE_CONFIG_LEN - 1)
-#define FIRMWARE_RXBUFFER_LEN (5 * FIRMWARE_MTU + 1024)
-#define FIRMWARE_RXBUFFER_START (FIRMWARE_BUFFER_END - FIRMWARE_RXBUFFER_LEN)
-#define FIRMWARE_RXBUFFER_END (FIRMWARE_RXBUFFER_START + \
- FIRMWARE_RXBUFFER_LEN - 1)
-#define FIRMWARE_TXBUFFER_START (FIRMWARE_BUFFER_START + FIRMWARE_CONFIG_LEN)
-#define FIRMWARE_TXBUFFER_LEN (FIRMWARE_BUFFER_LEN - FIRMWARE_CONFIG_LEN - \
- FIRMWARE_RXBUFFER_LEN)
-#define FIRMWARE_TXBUFFER_END (FIRMWARE_TXBUFFER_START + \
- FIRMWARE_TXBUFFER_LEN - 1)
-
-#define FIRMWARE_TXBUFFER_HEADER 100
-#define FIRMWARE_TXBUFFER_TRAILER 4
-
-/* FIXME: come up with a proper value */
-#define MAX_FRAME_LEN 2500
-
-/* unit is ms */
-#define TX_FRAME_LIFETIME 2000
-#define TX_TIMEOUT 4000
-
-#define SUPPORTED_CHANNELS 13
-
-/* FIXME */
-/* #define CHANNEL_CAL_LEN offsetof(struct s_lmo_scan, bratemask) - \ */
-/* offsetof(struct s_lmo_scan, channel) */
-#define CHANNEL_CAL_LEN 292
-#define CHANNEL_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * CHANNEL_CAL_LEN)
-/* FIXME */
-/* #define RSSI_CAL_LEN sizeof(struct s_lmo_scan) - \ */
-/* offsetof(struct s_lmo_scan, rssical) */
-#define RSSI_CAL_LEN 8
-#define RSSI_CAL_ARRAY_LEN (SUPPORTED_CHANNELS * RSSI_CAL_LEN)
-
-struct s_dma_regs {
- unsigned short cmd;
- unsigned short len;
- unsigned long addr;
-};
-
-struct stlc45xx_ie_tim {
- u8 dtim_count;
- u8 dtim_period;
- u8 bmap_control;
- u8 pvbmap[251];
-};
-
-struct txbuffer {
- /* can be removed when switched to skb queue */
- struct list_head tx_list;
-
- struct list_head buffer_list;
-
- int start;
- int frame_start;
- int end;
-
- struct sk_buff *skb;
- u32 handle;
-
- bool status_needed;
-
- int header_len;
-
- /* unit jiffies */
- unsigned long lifetime;
-};
-
-enum fw_state {
- FW_STATE_OFF,
- FW_STATE_BOOTING,
- FW_STATE_READY,
- FW_STATE_RESET,
- FW_STATE_RESETTING,
-};
-
-struct stlc45xx {
- struct ieee80211_hw *hw;
- struct spi_device *spi;
- struct work_struct work;
- struct work_struct work_reset;
- struct delayed_work work_tx_timeout;
- struct mutex mutex;
- struct completion fw_comp;
-
-
- u8 bssid[ETH_ALEN];
- u8 mac_addr[ETH_ALEN];
- int channel;
-
- u8 *cal_rssi;
- u8 *cal_channels;
-
- enum fw_state fw_state;
-
- spinlock_t tx_lock;
-
- /* protected by tx_lock */
- struct list_head txbuffer;
-
- /* protected by tx_lock */
- struct list_head tx_pending;
-
- /* protected by tx_lock */
- int tx_queue_stopped;
-
- /* protected by mutex */
- struct list_head tx_sent;
-
- int tx_frames;
-
- u8 *fw;
- int fw_len;
-
- bool psm;
- bool associated;
- int aid;
- bool pspolling;
-};
-
-
+++ /dev/null
-/************************************************************************
-* This is the LMAC API interface header file for STLC4560. *
-* Copyright (C) 2007 Conexant Systems, Inc. *
-* This program is free software; you can redistribute it and/or *
-* modify it under the terms of the GNU General Public License *
-* as published by the Free Software Foundation; either version 2 *
-* of the License, or (at your option) any later version. *
-* *
-* This program is distributed in the hope that it will be useful, *
-* but WITHOUT ANY WARRANTY; without even the implied warranty of *
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
-* GNU General Public License for more details. *
-* *
-* You should have received a copy of the GNU General Public License *
-* along with this program. If not, see <http://www.gnu.org/licenses/>.*
-*************************************************************************/
-
-#ifndef __lmac_h__
-#define __lmac_h__
-
-#define LM_TOP_VARIANT 0x0506
-#define LM_BOTTOM_VARIANT 0x0506
-
-/*
- * LMAC - UMAC interface definition:
- */
-
-#define LM_FLAG_CONTROL 0x8000
-#define LM_FLAG_ALIGN 0x4000
-
-#define LM_CTRL_OPSET 0x0001
-
-#define LM_OUT_PROMISC 0x0001
-#define LM_OUT_TIMESTAMP 0x0002
-#define LM_OUT_SEQNR 0x0004
-#define LM_OUT_BURST 0x0010
-#define LM_OUT_NOCANCEL 0x0020
-#define LM_OUT_CLEARTIM 0x0040
-#define LM_OUT_HITCHHIKE 0x0080
-#define LM_OUT_COMPRESS 0x0100
-#define LM_OUT_CONCAT 0x0200
-#define LM_OUT_PCS_ACCEPT 0x0400
-#define LM_OUT_WAITEOSP 0x0800
-
-
-#define LM_ALOFT_SP 0x10
-#define LM_ALOFT_CTS 0x20
-#define LM_ALOFT_RTS 0x40
-#define LM_ALOFT_MASK 0x1f
-#define LM_ALOFT_RATE 0x0f
-
-#define LM_IN_FCS_GOOD 0x0001
-#define LM_IN_MATCH_MAC 0x0002
-#define LM_IN_MCBC 0x0004
-#define LM_IN_BEACON 0x0008
-#define LM_IN_MATCH_BSS 0x0010
-#define LM_IN_BCAST_BSS 0x0020
-#define LM_IN_DATA 0x0040
-#define LM_IN_TRUNCATED 0x0080
-
-#define LM_IN_TRANSPARENT 0x0200
-
-#define LM_QUEUE_BEACON 0
-#define LM_QUEUE_SCAN 1
-#define LM_QUEUE_MGT 2
-#define LM_QUEUE_MCBC 3
-#define LM_QUEUE_DATA 4
-#define LM_QUEUE_DATA0 4
-#define LM_QUEUE_DATA1 5
-#define LM_QUEUE_DATA2 6
-#define LM_QUEUE_DATA3 7
-
-#define LM_SETUP_INFRA 0x0001
-#define LM_SETUP_IBSS 0x0002
-#define LM_SETUP_TRANSPARENT 0x0008
-#define LM_SETUP_PROMISCUOUS 0x0010
-#define LM_SETUP_HIBERNATE 0x0020
-#define LM_SETUP_NOACK 0x0040
-#define LM_SETUP_RX_DISABLED 0x0080
-
-#define LM_ANTENNA_0 0
-#define LM_ANTENNA_1 1
-#define LM_ANTENNA_DIVERSITY 2
-
-#define LM_TX_FAILED 0x0001
-#define LM_TX_PSM 0x0002
-#define LM_TX_PSM_CANCELLED 0x0004
-
-#define LM_SCAN_EXIT 0x0001
-#define LM_SCAN_TRAP 0x0002
-#define LM_SCAN_ACTIVE 0x0004
-#define LM_SCAN_FILTER 0x0008
-
-#define LM_PSM 0x0001
-#define LM_PSM_DTIM 0x0002
-#define LM_PSM_MCBC 0x0004
-#define LM_PSM_CHECKSUM 0x0008
-#define LM_PSM_SKIP_MORE_DATA 0x0010
-#define LM_PSM_BEACON_TIMEOUT 0x0020
-#define LM_PSM_HFOSLEEP 0x0040
-#define LM_PSM_AUTOSWITCH_SLEEP 0x0080
-#define LM_PSM_LPIT 0x0100
-#define LM_PSM_BF_UCAST_SKIP 0x0200
-#define LM_PSM_BF_MCAST_SKIP 0x0400
-
-/* hfosleep */
-#define LM_PSM_SLEEP_OPTION_MASK (LM_PSM_AUTOSWITCH_SLEEP | LM_PSM_HFOSLEEP)
-#define LM_PSM_SLEEP_OPTION_SHIFT 6
-/* hfosleepend */
-#define LM_PSM_BF_OPTION_MASK (LM_PSM_BF_MCAST_SKIP | LM_PSM_BF_UCAST_SKIP)
-#define LM_PSM_BF_OPTION_SHIFT 9
-
-
-#define LM_PRIVACC_WEP 0x01
-#define LM_PRIVACC_TKIP 0x02
-#define LM_PRIVACC_MICHAEL 0x04
-#define LM_PRIVACC_CCX_KP 0x08
-#define LM_PRIVACC_CCX_MIC 0x10
-#define LM_PRIVACC_AES_CCMP 0x20
-
-/* size of s_lm_descr in words */
-#define LM_DESCR_SIZE_WORDS 11
-
-#ifndef __ASSEMBLER__
-
-enum {
- LM_MODE_CLIENT = 0,
- LM_MODE_AP
-};
-
-struct s_lm_descr {
- uint16_t modes;
- uint16_t flags;
- uint32_t buffer_start;
- uint32_t buffer_end;
- uint8_t header;
- uint8_t trailer;
- uint8_t tx_queues;
- uint8_t tx_depth;
- uint8_t privacy;
- uint8_t rx_keycache;
- uint8_t tim_size;
- uint8_t pad1;
- uint8_t rates[16];
- uint32_t link;
- uint16_t mtu;
-};
-
-
-struct s_lm_control {
- uint16_t flags;
- uint16_t length;
- uint32_t handle;
- uint16_t oid;
- uint16_t pad;
- /* uint8_t data[]; */
-};
-
-enum {
- LM_PRIV_NONE = 0,
- LM_PRIV_WEP,
- LM_PRIV_TKIP,
- LM_PRIV_TKIPMICHAEL,
- LM_PRIV_CCX_WEPMIC,
- LM_PRIV_CCX_KPMIC,
- LM_PRIV_CCX_KP,
- LM_PRIV_AES_CCMP
-};
-
-enum {
- LM_DECRYPT_NONE,
- LM_DECRYPT_OK,
- LM_DECRYPT_NOKEY,
- LM_DECRYPT_NOMICHAEL,
- LM_DECRYPT_NOCKIPMIC,
- LM_DECRYPT_FAIL_WEP,
- LM_DECRYPT_FAIL_TKIP,
- LM_DECRYPT_FAIL_MICHAEL,
- LM_DECRYPT_FAIL_CKIPKP,
- LM_DECRYPT_FAIL_CKIPMIC,
- LM_DECRYPT_FAIL_AESCCMP
-};
-
-struct s_lm_data_out {
- uint16_t flags;
- uint16_t length;
- uint32_t handle;
- uint16_t aid;
- uint8_t rts_retries;
- uint8_t retries;
- uint8_t aloft[8];
- uint8_t aloft_ctrl;
- uint8_t crypt_offset;
- uint8_t keytype;
- uint8_t keylen;
- uint8_t key[16];
- uint8_t queue;
- uint8_t backlog;
- uint16_t durations[4];
- uint8_t antenna;
- uint8_t cts;
- int16_t power;
- uint8_t pad[2];
- /*uint8_t data[];*/
-};
-
-#define LM_RCPI_INVALID (0xff)
-
-struct s_lm_data_in {
- uint16_t flags;
- uint16_t length;
- uint16_t frequency;
- uint8_t antenna;
- uint8_t rate;
- uint8_t rcpi;
- uint8_t sq;
- uint8_t decrypt;
- uint8_t rssi_raw;
- uint32_t clock[2];
- /*uint8_t data[];*/
-};
-
-union u_lm_data {
- struct s_lm_data_out out;
- struct s_lm_data_in in;
-};
-
-enum {
- LM_OID_SETUP = 0,
- LM_OID_SCAN = 1,
- LM_OID_TRAP = 2,
- LM_OID_EDCF = 3,
- LM_OID_KEYCACHE = 4,
- LM_OID_PSM = 6,
- LM_OID_TXCANCEL = 7,
- LM_OID_TX = 8,
- LM_OID_BURST = 9,
- LM_OID_STATS = 10,
- LM_OID_LED = 13,
- LM_OID_TIMER = 15,
- LM_OID_NAV = 20,
- LM_OID_PCS = 22,
- LM_OID_BT_BALANCER = 28,
- LM_OID_GROUP_ADDRESS_TABLE = 30,
- LM_OID_ARPTABLE = 31,
- LM_OID_BT_OPTIONS = 35
-};
-
-enum {
- LM_FRONTEND_UNKNOWN = 0,
- LM_FRONTEND_DUETTE3,
- LM_FRONTEND_DUETTE2,
- LM_FRONTEND_FRISBEE,
- LM_FRONTEND_CROSSBOW,
- LM_FRONTEND_LONGBOW
-};
-
-
-#define INVALID_LPF_BANDWIDTH 0xffff
-#define INVALID_OSC_START_DELAY 0xffff
-
-struct s_lmo_setup {
- uint16_t flags;
- uint8_t macaddr[6];
- uint8_t bssid[6];
- uint8_t antenna;
- uint8_t rx_align;
- uint32_t rx_buffer;
- uint16_t rx_mtu;
- uint16_t frontend;
- uint16_t timeout;
- uint16_t truncate;
- uint32_t bratemask;
- uint8_t sbss_offset;
- uint8_t mcast_window;
- uint8_t rx_rssi_threshold;
- uint8_t rx_ed_threshold;
- uint32_t ref_clock;
- uint16_t lpf_bandwidth;
- uint16_t osc_start_delay;
-};
-
-
-struct s_lmo_scan {
- uint16_t flags;
- uint16_t dwell;
- uint8_t channel[292];
- uint32_t bratemask;
- uint8_t aloft[8];
- uint8_t rssical[8];
-};
-
-
-enum {
- LM_TRAP_SCAN = 0,
- LM_TRAP_TIMER,
- LM_TRAP_BEACON_TX,
- LM_TRAP_FAA_RADIO_ON,
- LM_TRAP_FAA_RADIO_OFF,
- LM_TRAP_RADAR,
- LM_TRAP_NO_BEACON,
- LM_TRAP_TBTT,
- LM_TRAP_SCO_ENTER,
- LM_TRAP_SCO_EXIT
-};
-
-struct s_lmo_trap {
- uint16_t event;
- uint16_t frequency;
-};
-
-struct s_lmo_timer {
- uint32_t interval;
-};
-
-struct s_lmo_nav {
- uint32_t period;
-};
-
-
-struct s_lmo_edcf_queue;
-
-struct s_lmo_edcf {
- uint8_t flags;
- uint8_t slottime;
- uint8_t sifs;
- uint8_t eofpad;
- struct s_lmo_edcf_queue {
- uint8_t aifs;
- uint8_t pad0;
- uint16_t cwmin;
- uint16_t cwmax;
- uint16_t txop;
- } queues[8];
- uint8_t mapping[4];
- uint16_t maxburst;
- uint16_t round_trip_delay;
-};
-
-struct s_lmo_keycache {
- uint8_t entry;
- uint8_t keyid;
- uint8_t address[6];
- uint8_t pad[2];
- uint8_t keytype;
- uint8_t keylen;
- uint8_t key[24];
-};
-
-
-struct s_lm_interval;
-
-struct s_lmo_psm {
- uint16_t flags;
- uint16_t aid;
- struct s_lm_interval {
- uint16_t interval;
- uint16_t periods;
- } intervals[4];
- /* uint16_t pad; */
- uint8_t beacon_rcpi_skip_max;
- uint8_t rcpi_delta_threshold;
- uint8_t nr;
- uint8_t exclude[1];
-};
-
-#define MC_FILTER_ADDRESS_NUM 4
-
-struct s_lmo_group_address_table {
- uint16_t filter_enable;
- uint16_t num_address;
- uint8_t macaddr_list[MC_FILTER_ADDRESS_NUM][6];
-};
-
-struct s_lmo_txcancel {
- uint32_t address[1];
-};
-
-
-struct s_lmo_tx {
- uint8_t flags;
- uint8_t retries;
- uint8_t rcpi;
- uint8_t sq;
- uint16_t seqctrl;
- uint8_t antenna;
- uint8_t pad;
-};
-
-struct s_lmo_burst {
- uint8_t flags;
- uint8_t queue;
- uint8_t backlog;
- uint8_t pad;
- uint16_t durations[32];
-};
-
-struct s_lmo_stats {
- uint32_t valid;
- uint32_t fcs;
- uint32_t abort;
- uint32_t phyabort;
- uint32_t rts_success;
- uint32_t rts_fail;
- uint32_t timestamp;
- uint32_t time_tx;
- uint32_t noisefloor;
- uint32_t sample_noise[8];
- uint32_t sample_cca;
- uint32_t sample_tx;
-};
-
-
-struct s_lmo_led {
- uint16_t flags;
- uint16_t mask[2];
- uint16_t delay/*[2]*/;
-};
-
-
-struct s_lmo_bt_balancer {
- uint16_t prio_thresh;
- uint16_t acl_thresh;
-};
-
-
-struct s_lmo_arp_table {
- uint16_t filter_enable;
- uint32_t ipaddr;
-};
-
-#endif /* __ASSEMBLER__ */
-
-#endif /* __lmac_h__ */
#include <linux/poll.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
+#include <linux/sched.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
+#include <linux/sched.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/uaccess.h>
free_netdev(pDevice->dev);
}
- kfree(pDevice);
DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "device_disconnect3.. \n");
}
config W35UND
tristate "IS89C35 WLAN USB driver"
- depends on MAC80211 && WLAN_80211 && USB && EXPERIMENTAL
+ depends on MAC80211 && WLAN && USB && EXPERIMENTAL
default n
---help---
This is highly experimental driver for Winbond WIFI card.
.n_bitrates = ARRAY_SIZE(wbsoft_rates),
};
+static void hal_set_beacon_period(struct hw_data *pHwData, u16 beacon_period)
+{
+ u32 tmp;
+
+ if (pHwData->SurpriseRemove)
+ return;
+
+ pHwData->BeaconPeriod = beacon_period;
+ tmp = pHwData->BeaconPeriod << 16;
+ tmp |= pHwData->ProbeDelay;
+ Wb35Reg_Write(pHwData, 0x0848, tmp);
+}
+
static int wbsoft_add_interface(struct ieee80211_hw *dev,
struct ieee80211_if_init_conf *conf)
{
- printk("wbsoft_add interface called\n");
+ struct wbsoft_priv *priv = dev->priv;
+
+ hal_set_beacon_period(&priv->sHwData, conf->vif->bss_conf.beacon_int);
+
return 0;
}
return 0;
}
+static u64 wbsoft_prepare_multicast(struct ieee80211_hw *hw, int mc_count,
+ struct dev_addr_list *mc_list)
+{
+ return mc_count;
+}
+
static void wbsoft_configure_filter(struct ieee80211_hw *dev,
unsigned int changed_flags,
unsigned int *total_flags,
- int mc_count, struct dev_mc_list *mclist)
+ u64 multicast)
{
unsigned int new_flags;
if (*total_flags & FIF_PROMISC_IN_BSS)
new_flags |= FIF_PROMISC_IN_BSS;
- else if ((*total_flags & FIF_ALLMULTI) || (mc_count > 32))
+ else if ((*total_flags & FIF_ALLMULTI) || (multicast > 32))
new_flags |= FIF_ALLMULTI;
dev->flags &= ~IEEE80211_HW_RX_INCLUDES_FCS;
Wb35Reg_Write(pHwData, 0x0824, reg->M24_MacControl);
}
-static void hal_set_beacon_period(struct hw_data *pHwData, u16 beacon_period)
-{
- u32 tmp;
-
- if (pHwData->SurpriseRemove)
- return;
-
- pHwData->BeaconPeriod = beacon_period;
- tmp = pHwData->BeaconPeriod << 16;
- tmp |= pHwData->ProbeDelay;
- Wb35Reg_Write(pHwData, 0x0848, tmp);
-}
-
static void
hal_set_current_channel_ex(struct hw_data *pHwData, ChanInfo channel)
{
static int wbsoft_config(struct ieee80211_hw *dev, u32 changed)
{
struct wbsoft_priv *priv = dev->priv;
- struct ieee80211_conf *conf = &dev->conf;
ChanInfo ch;
printk("wbsoft_config called\n");
ch.ChanNo = 1;
hal_set_current_channel(&priv->sHwData, ch);
- hal_set_beacon_period(&priv->sHwData, conf->beacon_int);
hal_set_accept_broadcast(&priv->sHwData, 1);
hal_set_accept_promiscuous(&priv->sHwData, 1);
hal_set_accept_multicast(&priv->sHwData, 1);
.add_interface = wbsoft_add_interface,
.remove_interface = wbsoft_remove_interface,
.config = wbsoft_config,
+ .prepare_multicast = wbsoft_prepare_multicast,
.configure_filter = wbsoft_configure_filter,
.get_stats = wbsoft_get_stats,
.get_tx_stats = wbsoft_get_tx_stats,
config PRISM2_USB
tristate "Prism2.5/3 USB driver"
- depends on WLAN_80211 && USB && WIRELESS_EXT
+ depends on WLAN && USB && WIRELESS_EXT
default n
---help---
This is the wlan-ng prism 2.5/3 USB driver for a wide range of
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/idr.h>
+#include <linux/sched.h>
#include <linux/string.h>
#include <linux/kobject.h>
#include <linux/uio_driver.h>
return 0;
}
-static struct vm_operations_struct uio_vm_ops = {
+static const struct vm_operations_struct uio_vm_ops = {
.open = uio_vma_open,
.close = uio_vma_close,
.fault = uio_vma_fault,
default y if PCMCIA && !M32R # sl811_cs
default y if ARM # SL-811
default y if SUPERH # r8a66597-hcd
- default y if MICROBLAZE
default PCI
# many non-PCI SOC chips embed OHCI
#define USBTMC_SIZE_IOBUFFER 2048
/* Default USB timeout (in milliseconds) */
-#define USBTMC_TIMEOUT 10
+#define USBTMC_TIMEOUT 5000
/*
* Maximum number of read cycles to empty bulk in endpoint during CLEAR and
return retval;
}
-static struct file_operations fops = {
+static const struct file_operations fops = {
.owner = THIS_MODULE,
.read = usbtmc_read,
.write = usbtmc_write,
config USB_GADGET_PXA25X
boolean "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+ select USB_OTG_UTILS
help
Intel's PXA 25x series XScale ARM-5TE processors include
an integrated full speed USB 1.1 device controller. The
* simpler, Microsoft pushes their own approach: RNDIS. The published
* RNDIS specs are ambiguous and appear to be incomplete, and are also
* needlessly complex. They borrow more from CDC ACM than CDC ECM.
- *
- * While CDC ECM, CDC Subset, and RNDIS are designed to extend the ethernet
- * interface to the target, CDC EEM was designed to use ethernet over the USB
- * link between the host and target. CDC EEM is implemented as an alternative
- * to those other protocols when that communication model is more appropriate
*/
#define DRIVER_DESC "Ethernet Gadget"
#define RNDIS_PRODUCT_NUM 0xa4a2 /* Ethernet/RNDIS Gadget */
/* For EEM gadgets */
-#define EEM_VENDOR_NUM 0x0525 /* INVALID - NEEDS TO BE ALLOCATED */
-#define EEM_PRODUCT_NUM 0xa4a1 /* INVALID - NEEDS TO BE ALLOCATED */
+#define EEM_VENDOR_NUM 0x1d6b /* Linux Foundation */
+#define EEM_PRODUCT_NUM 0x0102 /* EEM Gadget */
/*-------------------------------------------------------------------------*/
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include "g_zero.h"
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include "u_serial.h"
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include "g_zero.h"
static void fsl_udc_release(struct device *dev)
{
complete(udc_controller->done);
- dma_free_coherent(dev, udc_controller->ep_qh_size,
+ dma_free_coherent(dev->parent, udc_controller->ep_qh_size,
udc_controller->ep_qh, udc_controller->ep_qh_dma);
kfree(udc_controller);
}
struct clk *clk;
void __iomem *base;
int ret = 0;
- int i, res_size;
+ int i;
+ resource_size_t res_size;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
return -ENODEV;
}
- res_size = res->end - res->start + 1;
+ res_size = resource_size(res);
if (!request_mem_region(res->start, res_size, res->name)) {
dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n",
res_size, res->start);
clk_disable(imx_usb->clk);
iounmap(imx_usb->base);
- release_mem_region(imx_usb->res->start,
- imx_usb->res->end - imx_usb->res->start + 1);
+ release_mem_region(imx_usb->res->start, resource_size(imx_usb->res));
if (pdata->exit)
pdata->exit(&pdev->dev);
#include <linux/wait.h>
#include <linux/compiler.h>
#include <asm/uaccess.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/smp_lock.h>
}
/* used after endpoint configuration */
-static struct file_operations printer_io_operations = {
+static const struct file_operations printer_io_operations = {
.owner = THIS_MODULE,
.open = printer_open,
.read = printer_read,
}
static inline void r8a66597_read_fifo(struct r8a66597 *r8a66597,
- unsigned long offset, u16 *buf,
+ unsigned long offset,
+ unsigned char *buf,
int len)
{
+ unsigned long fifoaddr = r8a66597->reg + offset;
+ unsigned int data;
+ int i;
+
if (r8a66597->pdata->on_chip) {
- unsigned long fifoaddr = r8a66597->reg + offset;
- unsigned long count;
- union {
- unsigned long dword;
- unsigned char byte[4];
- } data;
- unsigned char *pb;
- int i;
-
- count = len / 4;
- insl(fifoaddr, buf, count);
-
- if (len & 0x00000003) {
- data.dword = inl(fifoaddr);
- pb = (unsigned char *)buf + count * 4;
- for (i = 0; i < (len & 0x00000003); i++)
- pb[i] = data.byte[i];
+ /* 32-bit accesses for on_chip controllers */
+
+ /* aligned buf case */
+ if (len >= 4 && !((unsigned long)buf & 0x03)) {
+ insl(fifoaddr, buf, len / 4);
+ buf += len & ~0x03;
+ len &= 0x03;
+ }
+
+ /* unaligned buf case */
+ for (i = 0; i < len; i++) {
+ if (!(i & 0x03))
+ data = inl(fifoaddr);
+
+ buf[i] = (data >> ((i & 0x03) * 8)) & 0xff;
}
} else {
- len = (len + 1) / 2;
- insw(r8a66597->reg + offset, buf, len);
+ /* 16-bit accesses for external controllers */
+
+ /* aligned buf case */
+ if (len >= 2 && !((unsigned long)buf & 0x01)) {
+ insw(fifoaddr, buf, len / 2);
+ buf += len & ~0x01;
+ len &= 0x01;
+ }
+
+ /* unaligned buf case */
+ for (i = 0; i < len; i++) {
+ if (!(i & 0x01))
+ data = inw(fifoaddr);
+
+ buf[i] = (data >> ((i & 0x01) * 8)) & 0xff;
+ }
}
}
}
static inline void r8a66597_write_fifo(struct r8a66597 *r8a66597,
- unsigned long offset, u16 *buf,
+ unsigned long offset,
+ unsigned char *buf,
int len)
{
unsigned long fifoaddr = r8a66597->reg + offset;
+ int adj = 0;
+ int i;
if (r8a66597->pdata->on_chip) {
- unsigned long count;
- unsigned char *pb;
- int i;
-
- count = len / 4;
- outsl(fifoaddr, buf, count);
-
- if (len & 0x00000003) {
- pb = (unsigned char *)buf + count * 4;
- for (i = 0; i < (len & 0x00000003); i++) {
- if (r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)
- outb(pb[i], fifoaddr + i);
- else
- outb(pb[i], fifoaddr + 3 - i);
- }
+ /* 32-bit access only if buf is 32-bit aligned */
+ if (len >= 4 && !((unsigned long)buf & 0x03)) {
+ outsl(fifoaddr, buf, len / 4);
+ buf += len & ~0x03;
+ len &= 0x03;
}
} else {
- int odd = len & 0x0001;
-
- len = len / 2;
- outsw(fifoaddr, buf, len);
- if (unlikely(odd)) {
- buf = &buf[len];
- outb((unsigned char)*buf, fifoaddr);
+ /* 16-bit access only if buf is 16-bit aligned */
+ if (len >= 2 && !((unsigned long)buf & 0x01)) {
+ outsw(fifoaddr, buf, len / 2);
+ buf += len & ~0x01;
+ len &= 0x01;
}
}
+
+ /* adjust fifo address in the little endian case */
+ if (!(r8a66597_read(r8a66597, CFIFOSEL) & BIGEND)) {
+ if (r8a66597->pdata->on_chip)
+ adj = 0x03; /* 32-bit wide */
+ else
+ adj = 0x01; /* 16-bit wide */
+ }
+
+ for (i = 0; i < len; i++)
+ outb(buf[i], fifoaddr + adj - (i & adj));
}
static inline void r8a66597_mdfy(struct r8a66597 *r8a66597,
*/
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/ctype.h>
/* #define VERBOSE_DEBUG */
#include <linux/kernel.h>
-#include <linux/utsname.h>
#include <linux/device.h>
#include <linux/ctype.h>
#include <linux/etherdevice.h>
goto fail;
}
+ period = urb->interval;
+ if (!stream->highspeed)
+ period <<= 3;
+
now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
/* when's the last uframe this urb could start? */
/* Fell behind (by up to twice the slop amount)? */
if (start >= max - 2 * 8 * SCHEDULE_SLOP)
- start += stream->interval * DIV_ROUND_UP(
- max - start, stream->interval) - mod;
+ start += period * DIV_ROUND_UP(
+ max - start, period) - mod;
/* Tried to schedule too far into the future? */
if (unlikely((start + sched->span) >= max)) {
status = -EFBIG;
goto fail;
}
+ stream->next_uframe = start;
goto ready;
}
/* NOTE: assumes URB_ISO_ASAP, to limit complexity/bugs */
- period = urb->interval;
- if (!stream->highspeed)
- period <<= 3;
-
/* find a uframe slot with enough bandwidth */
for (; start < (stream->next_uframe + period); start++) {
int enough_space;
dev_info(hcd->self.controller, "ISP1362 Memory usage:\n");
dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n",
istl_size / 2, istl_size, 0, istl_size / 2);
- dev_info(hcd->self.controller, " INTL: %4d * (%3u+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n",
ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE,
intl_size, istl_size);
- dev_info(hcd->self.controller, " ATL : %4d * (%3u+8): %4d @ $%04x\n",
+ dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n",
atl_buffers, atl_blksize - PTD_HEADER_SIZE,
atl_size, istl_size + intl_size);
dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total,
DBG(0, "%s: Removing HCD\n", __func__);
usb_remove_hcd(hcd);
- DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__,
- (u32)isp1362_hcd->data_reg);
+ DBG(0, "%s: Unmapping data_reg @ %p\n", __func__,
+ isp1362_hcd->data_reg);
iounmap(isp1362_hcd->data_reg);
- DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__,
- (u32)isp1362_hcd->addr_reg);
+ DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__,
+ isp1362_hcd->addr_reg);
iounmap(isp1362_hcd->addr_reg);
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
return 0;
err6:
- DBG(0, "%s: Freeing dev %08x\n", __func__, (u32)isp1362_hcd);
+ DBG(0, "%s: Freeing dev %p\n", __func__, isp1362_hcd);
usb_put_hcd(hcd);
err5:
- DBG(0, "%s: Unmapping data_reg @ %08x\n", __func__, (u32)data_reg);
+ DBG(0, "%s: Unmapping data_reg @ %p\n", __func__, data_reg);
iounmap(data_reg);
err4:
DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)data->start);
release_mem_region(data->start, resource_len(data));
err3:
- DBG(0, "%s: Unmapping addr_reg @ %08x\n", __func__, (u32)addr_reg);
+ DBG(0, "%s: Unmapping addr_reg @ %p\n", __func__, addr_reg);
iounmap(addr_reg);
err2:
DBG(0, "%s: Releasing mem region %08lx\n", __func__, (long unsigned int)addr->start);
static inline void ALIGNSTAT(struct isp1362_hcd *isp1362_hcd, void *ptr)
{
- unsigned p = (unsigned)ptr;
+ unsigned long p = (unsigned long)ptr;
if (!(p & 0xf))
isp1362_hcd->stat16++;
else if (!(p & 0x7))
if (!len)
return;
- if ((unsigned)dp & 0x1) {
+ if ((unsigned long)dp & 0x1) {
/* not aligned */
for (; len > 1; len -= 2) {
data = *dp++;
isp1362_write_diraddr(isp1362_hcd, offset, len);
- DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %08x\n", __func__,
- len, offset, (u32)buf);
+ DBG(3, "%s: Reading %d byte from buffer @%04x to memory @ %p\n",
+ __func__, len, offset, buf);
isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
isp1362_write_diraddr(isp1362_hcd, offset, len);
- DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %08x\n", __func__,
- len, offset, (u32)buf);
+ DBG(3, "%s: Writing %d byte to buffer @%04x from memory @ %p\n",
+ __func__, len, offset, buf);
isp1362_write_reg16(isp1362_hcd, HCuPINT, HCuPINT_EOT);
_WARN_ON((isp1362_read_reg16(isp1362_hcd, HCuPINT) & HCuPINT_EOT));
return 0;
}
-#ifdef CONFIG_PM
-static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM
+static int ohci_hcd_pxa27x_drv_suspend(struct device *dev)
{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
if (time_before(jiffies, ohci->ohci.next_statechange))
msleep(5);
ohci->ohci.next_statechange = jiffies;
- pxa27x_stop_hc(ohci, &pdev->dev);
+ pxa27x_stop_hc(ohci, dev);
hcd->state = HC_STATE_SUSPENDED;
return 0;
}
-static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
+static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
{
- struct usb_hcd *hcd = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+ struct pxaohci_platform_data *inf = dev->platform_data;
int status;
if (time_before(jiffies, ohci->ohci.next_statechange))
msleep(5);
ohci->ohci.next_statechange = jiffies;
- if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0)
+ if ((status = pxa27x_start_hc(ohci, dev)) < 0)
return status;
+ /* Select Power Management Mode */
+ pxa27x_ohci_select_pmm(ohci, inf->port_mode);
+
ohci_finish_controller_resume(hcd);
return 0;
}
+
+static struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = {
+ .suspend = ohci_hcd_pxa27x_drv_suspend,
+ .resume = ohci_hcd_pxa27x_drv_resume,
+};
#endif
/* work with hotplug and coldplug */
.probe = ohci_hcd_pxa27x_drv_probe,
.remove = ohci_hcd_pxa27x_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
- .suspend = ohci_hcd_pxa27x_drv_suspend,
- .resume = ohci_hcd_pxa27x_drv_resume,
-#endif
.driver = {
.name = "pxa27x-ohci",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &ohci_hcd_pxa27x_pm_ops,
+#endif
},
};
else if (pdev->class == PCI_CLASS_SERIAL_USB_XHCI)
quirk_usb_handoff_xhci(pdev);
}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, quirk_usb_early_handoff);
if (syssts == SE0) {
r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
- return;
- }
+ } else {
+ if (syssts == FS_JSTS)
+ r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
+ else if (syssts == LS_JSTS)
+ r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
- if (syssts == FS_JSTS)
- r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port));
- else if (syssts == LS_JSTS)
- r8a66597_bclr(r8a66597, HSE, get_syscfg_reg(port));
+ r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
+ r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
- r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port));
- r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port));
+ if (r8a66597->bus_suspended)
+ usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+ }
- if (r8a66597->bus_suspended)
- usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597));
+ usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597));
}
/* this function must be called with interrupt disabled */
u16 speed = get_rh_usb_speed(r8a66597, port);
struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
+ rh->port &= ~((1 << USB_PORT_FEAT_HIGHSPEED) |
+ (1 << USB_PORT_FEAT_LOWSPEED));
if (speed == HSMODE)
rh->port |= (1 << USB_PORT_FEAT_HIGHSPEED);
else if (speed == LSMODE)
if (status & QTD_STS_HALTED) {
/* Ug, an error. */
process_halted_qtd(whc, qset, td);
+ /* A halted qTD always triggers an update
+ because the qset was either removed or
+ reactivated. */
+ update |= WHC_UPDATE_UPDATED;
goto done;
}
struct whc_urb *wurb = urb->hcpriv;
struct whc_qset *qset = wurb->qset;
struct whc_std *std, *t;
+ bool has_qtd = false;
int ret;
unsigned long flags;
goto out;
list_for_each_entry_safe(std, t, &qset->stds, list_node) {
- if (std->urb == urb)
+ if (std->urb == urb) {
+ if (std->qtd)
+ has_qtd = true;
qset_free_std(whc, std);
- else
+ } else
std->qtd = NULL; /* so this std is re-added when the qset is */
}
- asl_qset_remove(whc, qset);
- wurb->status = status;
- wurb->is_async = true;
- queue_work(whc->workqueue, &wurb->dequeue_work);
-
+ if (has_qtd) {
+ asl_qset_remove(whc, qset);
+ wurb->status = status;
+ wurb->is_async = true;
+ queue_work(whc->workqueue, &wurb->dequeue_work);
+ } else
+ qset_remove_urb(whc, qset, urb, status);
out:
spin_unlock_irqrestore(&whc->lock, flags);
return single_open(file, pzl_print, inode->i_private);
}
-static struct file_operations di_fops = {
+static const struct file_operations di_fops = {
.open = di_open,
.read = seq_read,
.llseek = seq_lseek,
.owner = THIS_MODULE,
};
-static struct file_operations asl_fops = {
+static const struct file_operations asl_fops = {
.open = asl_open,
.read = seq_read,
.llseek = seq_lseek,
.owner = THIS_MODULE,
};
-static struct file_operations pzl_fops = {
+static const struct file_operations pzl_fops = {
.open = pzl_open,
.read = seq_read,
.llseek = seq_lseek,
if (status & QTD_STS_HALTED) {
/* Ug, an error. */
process_halted_qtd(whc, qset, td);
+ /* A halted qTD always triggers an update
+ because the qset was either removed or
+ reactivated. */
+ update |= WHC_UPDATE_UPDATED;
goto done;
}
struct whc_urb *wurb = urb->hcpriv;
struct whc_qset *qset = wurb->qset;
struct whc_std *std, *t;
+ bool has_qtd = false;
int ret;
unsigned long flags;
goto out;
list_for_each_entry_safe(std, t, &qset->stds, list_node) {
- if (std->urb == urb)
+ if (std->urb == urb) {
+ if (std->qtd)
+ has_qtd = true;
qset_free_std(whc, std);
- else
+ } else
std->qtd = NULL; /* so this std is re-added when the qset is */
}
- pzl_qset_remove(whc, qset);
- wurb->status = status;
- wurb->is_async = false;
- queue_work(whc->workqueue, &wurb->dequeue_work);
-
+ if (has_qtd) {
+ pzl_qset_remove(whc, qset);
+ update_pzl_hw_view(whc);
+ wurb->status = status;
+ wurb->is_async = false;
+ queue_work(whc->workqueue, &wurb->dequeue_work);
+ } else
+ qset_remove_urb(whc, qset, urb, status);
out:
spin_unlock_irqrestore(&whc->lock, flags);
spin_lock_irqsave(&xhci->lock, flags);
temp = xhci_readl(xhci, &xhci->op_regs->status);
xhci_dbg(xhci, "op reg status = 0x%x\n", temp);
+ if (temp == 0xffffffff) {
+ xhci_dbg(xhci, "HW died, polling stopped.\n");
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
+ }
+
temp = xhci_readl(xhci, &xhci->ir_set->irq_pending);
xhci_dbg(xhci, "ir_set 0 pending = 0x%x\n", temp);
xhci_dbg(xhci, "No-op commands handled = %d\n", xhci->noops_handled);
{
unsigned long flags;
int ret;
+ u32 temp;
struct xhci_hcd *xhci;
struct xhci_td *td;
unsigned int ep_index;
ret = usb_hcd_check_unlink_urb(hcd, urb, status);
if (ret || !urb->hcpriv)
goto done;
+ temp = xhci_readl(xhci, &xhci->op_regs->status);
+ if (temp == 0xffffffff) {
+ xhci_dbg(xhci, "HW died, freeing TD.\n");
+ td = (struct xhci_td *) urb->hcpriv;
+
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, -ESHUTDOWN);
+ kfree(td);
+ return ret;
+ }
xhci_dbg(xhci, "Cancel URB %p\n", urb);
xhci_dbg(xhci, "Event ring:\n");
ctrl_ctx->drop_flags |= drop_flag;
new_drop_flags = ctrl_ctx->drop_flags;
- ctrl_ctx->add_flags = ~drop_flag;
+ ctrl_ctx->add_flags &= ~drop_flag;
new_add_flags = ctrl_ctx->add_flags;
last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
unsigned long flags;
+ u32 state;
if (udev->slot_id == 0)
return;
spin_lock_irqsave(&xhci->lock, flags);
+ /* Don't disable the slot if the host controller is dead. */
+ state = xhci_readl(xhci, &xhci->op_regs->status);
+ if (state == 0xffffffff) {
+ xhci_free_virt_device(xhci, udev->slot_id);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ return;
+ }
+
if (xhci_queue_slot_control(xhci, TRB_DISABLE_SLOT, udev->slot_id)) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
return read_count;
}
-static struct
-file_operations usb_rio_fops = {
+static const struct file_operations usb_rio_fops = {
.owner = THIS_MODULE,
.read = read_rio,
.write = write_rio,
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/kref.h>
#include "sisusb.h"
if (le16_to_cpu(dev->udev->descriptor.idProduct) != 0x0001) {
dev_warn(&interface->dev, "USBLCD model not supported.\n");
- return -ENODEV;
+ retval = -ENODEV;
+ goto error;
}
/* set up the endpoint information */
return 0;
}
-static struct vm_operations_struct mon_bin_vm_ops = {
+static const struct vm_operations_struct mon_bin_vm_ops = {
.open = mon_bin_vma_open,
.close = mon_bin_vma_close,
.fault = mon_bin_vma_fault,
# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
config USB_MUSB_HDRC
- depends on (USB || USB_GADGET) && HAVE_CLK
- depends on !SUPERH
+ depends on (USB || USB_GADGET)
+ depends on (ARM || BLACKFIN)
select NOP_USB_XCEIV if ARCH_DAVINCI
select TWL4030_USB if MACH_OMAP_3430SDP
select NOP_USB_XCEIV if MACH_OMAP3EVM
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/list.h>
-#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/io.h>
#endif
#endif /* need MUSB gadget selection */
+#ifndef CONFIG_HAVE_CLK
+/* Dummy stub for clk framework */
+#define clk_get(dev, id) NULL
+#define clk_put(clock) do {} while (0)
+#define clk_enable(clock) do {} while (0)
+#define clk_disable(clock) do {} while (0)
+#endif
#ifdef CONFIG_PROC_FS
#include <linux/fs.h>
/* Not implemented - HW has seperate Tx/Rx FIFO */
#define MUSB_TXCSR_MODE 0x0000
-/*
- * Dummy stub for clk framework, it will be removed
- * until Blackfin supports clk framework
- */
-#define clk_get(dev, id) NULL
-#define clk_put(clock) do {} while (0)
-#define clk_enable(clock) do {} while (0)
-#define clk_disable(clock) do {} while (0)
-
static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
{
}
{
struct usb_serial_port *port = tty->driver_data;
struct aircable_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->rx_lock, flags);
+ spin_lock_irq(&priv->rx_lock);
priv->rx_flags |= THROTTLED;
- spin_unlock_irqrestore(&priv->rx_lock, flags);
+ spin_unlock_irq(&priv->rx_lock);
}
/* Based on ftdi_sio.c unthrottle */
struct usb_serial_port *port = tty->driver_data;
struct aircable_private *priv = usb_get_serial_port_data(port);
int actually_throttled;
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->rx_lock, flags);
+ spin_lock_irq(&priv->rx_lock);
actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
- spin_unlock_irqrestore(&priv->rx_lock, flags);
+ spin_unlock_irq(&priv->rx_lock);
if (actually_throttled)
schedule_work(&priv->rx_work);
{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
{ } /* Terminating Entry */
};
{
struct usb_serial_port *port = tty->driver_data;
struct cypress_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irq(&priv->lock);
priv->rx_flags = THROTTLED;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
}
struct usb_serial_port *port = tty->driver_data;
struct cypress_private *priv = usb_get_serial_port_data(port);
int actually_throttled, result;
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irq(&priv->lock);
actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
priv->rx_flags = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
if (!priv->comm_is_ok)
return;
if (actually_throttled) {
port->interrupt_in_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "%s - failed submitting read urb, "
"error %d\n", __func__, result);
spin_lock_irqsave(&priv->dp_port_lock, flags);
- /* turn throttle off */
- priv->dp_throttled = 0;
- priv->dp_throttle_restart = 0;
-
/* restart read chain */
if (priv->dp_throttle_restart) {
port->read_urb->dev = port->serial->dev;
ret = usb_submit_urb(port->read_urb, GFP_ATOMIC);
}
+ /* turn throttle off */
+ priv->dp_throttled = 0;
+ priv->dp_throttle_restart = 0;
+
spin_unlock_irqrestore(&priv->dp_port_lock, flags);
if (ret)
dbg("%s - port %d", __func__, port->number);
port->read_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
unsigned long last_dtr_rts; /* saved modem control outputs */
wait_queue_head_t delta_msr_wait; /* Used for TIOCMIWAIT */
char prev_status, diff_status; /* Used for TIOCMIWAIT */
- __u8 rx_flags; /* receive state flags (throttling) */
- spinlock_t rx_lock; /* spinlock for receive state */
- struct delayed_work rx_work;
struct usb_serial_port *port;
- int rx_processed;
- unsigned long rx_bytes;
-
__u16 interface; /* FT2232C, FT2232H or FT4232H port interface
(0 for FT232/245) */
/* Constants for read urb and write urb */
#define BUFSZ 512
-/* rx_flags */
-#define THROTTLED 0x01
-#define ACTUALLY_THROTTLED 0x02
-
/* Used for TIOCMIWAIT */
#define FTDI_STATUS_B0_MASK (FTDI_RS0_CTS | FTDI_RS0_DSR | FTDI_RS0_RI | FTDI_RS0_RLSD)
#define FTDI_STATUS_B1_MASK (FTDI_RS_BI)
static int ftdi_chars_in_buffer(struct tty_struct *tty);
static void ftdi_write_bulk_callback(struct urb *urb);
static void ftdi_read_bulk_callback(struct urb *urb);
-static void ftdi_process_read(struct work_struct *work);
+static void ftdi_process_read(struct usb_serial_port *port);
static void ftdi_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old);
static int ftdi_tiocmget(struct tty_struct *tty, struct file *file);
(new_serial.flags & ASYNC_FLAGS));
priv->custom_divisor = new_serial.custom_divisor;
- tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
write_latency_timer(port);
check_and_exit:
}
kref_init(&priv->kref);
- spin_lock_init(&priv->rx_lock);
spin_lock_init(&priv->tx_lock);
init_waitqueue_head(&priv->delta_msr_wait);
/* This will push the characters through immediately rather
port->read_urb->transfer_buffer_length = BUFSZ;
}
- INIT_DELAYED_WORK(&priv->rx_work, ftdi_process_read);
priv->port = port;
/* Free port's existing write urb and transfer buffer. */
return 0;
}
+static int ftdi_submit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
+{
+ struct urb *urb = port->read_urb;
+ struct usb_serial *serial = port->serial;
+ int result;
+
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port->bulk_in_endpointAddress),
+ urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ ftdi_read_bulk_callback, port);
+ result = usb_submit_urb(urb, mem_flags);
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
+ __func__, result);
+ return result;
+}
+
static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port)
{ /* ftdi_open */
struct usb_device *dev = port->serial->dev;
spin_lock_irqsave(&priv->tx_lock, flags);
priv->tx_bytes = 0;
spin_unlock_irqrestore(&priv->tx_lock, flags);
- spin_lock_irqsave(&priv->rx_lock, flags);
- priv->rx_bytes = 0;
- spin_unlock_irqrestore(&priv->rx_lock, flags);
-
- if (tty)
- tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
write_latency_timer(port);
ftdi_set_termios(tty, port, tty->termios);
/* Not throttled */
- spin_lock_irqsave(&priv->rx_lock, flags);
- priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
- spin_unlock_irqrestore(&priv->rx_lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ port->throttled = 0;
+ port->throttle_req = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
/* Start reading from the device */
- priv->rx_processed = 0;
- usb_fill_bulk_urb(port->read_urb, dev,
- usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- ftdi_read_bulk_callback, port);
- result = usb_submit_urb(port->read_urb, GFP_KERNEL);
- if (result)
- dev_err(&port->dev,
- "%s - failed submitting read urb, error %d\n",
- __func__, result);
- else
+ result = ftdi_submit_read_urb(port, GFP_KERNEL);
+ if (!result)
kref_get(&priv->kref);
return result;
dbg("%s", __func__);
-
- /* cancel any scheduled reading */
- cancel_delayed_work_sync(&priv->rx_work);
-
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
kref_put(&priv->kref, ftdi_sio_priv_release);
return buffered;
}
-static void ftdi_read_bulk_callback(struct urb *urb)
+static int ftdi_process_packet(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ftdi_private *priv,
+ char *packet, int len)
{
- struct usb_serial_port *port = urb->context;
- struct tty_struct *tty;
- struct ftdi_private *priv;
- unsigned long countread;
- unsigned long flags;
- int status = urb->status;
-
- if (urb->number_of_packets > 0) {
- dev_err(&port->dev, "%s transfer_buffer_length %d "
- "actual_length %d number of packets %d\n", __func__,
- urb->transfer_buffer_length,
- urb->actual_length, urb->number_of_packets);
- dev_err(&port->dev, "%s transfer_flags %x\n", __func__,
- urb->transfer_flags);
- }
+ int i;
+ char status;
+ char flag;
+ char *ch;
dbg("%s - port %d", __func__, port->number);
- if (port->port.count <= 0)
- return;
-
- tty = tty_port_tty_get(&port->port);
- if (!tty) {
- dbg("%s - bad tty pointer - exiting", __func__);
- return;
+ if (len < 2) {
+ dbg("malformed packet");
+ return 0;
}
- priv = usb_get_serial_port_data(port);
- if (!priv) {
- dbg("%s - bad port private data pointer - exiting", __func__);
- goto out;
+ /* Compare new line status to the old one, signal if different/
+ N.B. packet may be processed more than once, but differences
+ are only processed once. */
+ status = packet[0] & FTDI_STATUS_B0_MASK;
+ if (status != priv->prev_status) {
+ priv->diff_status |= status ^ priv->prev_status;
+ wake_up_interruptible(&priv->delta_msr_wait);
+ priv->prev_status = status;
}
- if (urb != port->read_urb)
- dev_err(&port->dev, "%s - Not my urb!\n", __func__);
-
- if (status) {
- /* This will happen at close every time so it is a dbg not an
- err */
- dbg("(this is ok on close) nonzero read bulk status received: %d", status);
- goto out;
+ /*
+ * Although the device uses a bitmask and hence can have multiple
+ * errors on a packet - the order here sets the priority the error is
+ * returned to the tty layer.
+ */
+ flag = TTY_NORMAL;
+ if (packet[1] & FTDI_RS_OE) {
+ flag = TTY_OVERRUN;
+ dbg("OVERRRUN error");
+ }
+ if (packet[1] & FTDI_RS_BI) {
+ flag = TTY_BREAK;
+ dbg("BREAK received");
+ usb_serial_handle_break(port);
+ }
+ if (packet[1] & FTDI_RS_PE) {
+ flag = TTY_PARITY;
+ dbg("PARITY error");
+ }
+ if (packet[1] & FTDI_RS_FE) {
+ flag = TTY_FRAME;
+ dbg("FRAMING error");
}
- /* count data bytes, but not status bytes */
- countread = urb->actual_length;
- countread -= 2 * DIV_ROUND_UP(countread, priv->max_packet_size);
- spin_lock_irqsave(&priv->rx_lock, flags);
- priv->rx_bytes += countread;
- spin_unlock_irqrestore(&priv->rx_lock, flags);
-
- ftdi_process_read(&priv->rx_work.work);
-out:
- tty_kref_put(tty);
-} /* ftdi_read_bulk_callback */
-
+ len -= 2;
+ if (!len)
+ return 0; /* status only */
+ ch = packet + 2;
+
+ if (!(port->console && port->sysrq) && flag == TTY_NORMAL)
+ tty_insert_flip_string(tty, ch, len);
+ else {
+ for (i = 0; i < len; i++, ch++) {
+ if (!usb_serial_handle_sysrq_char(tty, port, *ch))
+ tty_insert_flip_char(tty, *ch, flag);
+ }
+ }
+ return len;
+}
-static void ftdi_process_read(struct work_struct *work)
-{ /* ftdi_process_read */
- struct ftdi_private *priv =
- container_of(work, struct ftdi_private, rx_work.work);
- struct usb_serial_port *port = priv->port;
- struct urb *urb;
+static void ftdi_process_read(struct usb_serial_port *port)
+{
+ struct urb *urb = port->read_urb;
struct tty_struct *tty;
- char error_flag;
- unsigned char *data;
-
+ struct ftdi_private *priv = usb_get_serial_port_data(port);
+ char *data = (char *)urb->transfer_buffer;
int i;
- int result;
- int need_flip;
- int packet_offset;
- unsigned long flags;
-
- dbg("%s - port %d", __func__, port->number);
-
- if (port->port.count <= 0)
- return;
+ int len;
+ int count = 0;
tty = tty_port_tty_get(&port->port);
- if (!tty) {
- dbg("%s - bad tty pointer - exiting", __func__);
+ if (!tty)
return;
- }
-
- priv = usb_get_serial_port_data(port);
- if (!priv) {
- dbg("%s - bad port private data pointer - exiting", __func__);
- goto out;
- }
-
- urb = port->read_urb;
- if (!urb) {
- dbg("%s - bad read_urb pointer - exiting", __func__);
- goto out;
- }
-
- data = urb->transfer_buffer;
- if (priv->rx_processed) {
- dbg("%s - already processed: %d bytes, %d remain", __func__,
- priv->rx_processed,
- urb->actual_length - priv->rx_processed);
- } else {
- /* The first two bytes of every read packet are status */
- if (urb->actual_length > 2)
- usb_serial_debug_data(debug, &port->dev, __func__,
- urb->actual_length, data);
- else
- dbg("Status only: %03oo %03oo", data[0], data[1]);
+ for (i = 0; i < urb->actual_length; i += priv->max_packet_size) {
+ len = min_t(int, urb->actual_length - i, priv->max_packet_size);
+ count += ftdi_process_packet(tty, port, priv, &data[i], len);
}
-
- /* TO DO -- check for hung up line and handle appropriately: */
- /* send hangup */
- /* See acm.c - you do a tty_hangup - eg tty_hangup(tty) */
- /* if CD is dropped and the line is not CLOCAL then we should hangup */
-
- need_flip = 0;
- for (packet_offset = priv->rx_processed;
- packet_offset < urb->actual_length; packet_offset += priv->max_packet_size) {
- int length;
-
- /* Compare new line status to the old one, signal if different/
- N.B. packet may be processed more than once, but differences
- are only processed once. */
- char new_status = data[packet_offset + 0] &
- FTDI_STATUS_B0_MASK;
- if (new_status != priv->prev_status) {
- priv->diff_status |=
- new_status ^ priv->prev_status;
- wake_up_interruptible(&priv->delta_msr_wait);
- priv->prev_status = new_status;
- }
-
- length = min_t(u32, priv->max_packet_size, urb->actual_length-packet_offset)-2;
- if (length < 0) {
- dev_err(&port->dev, "%s - bad packet length: %d\n",
- __func__, length+2);
- length = 0;
- }
-
- if (priv->rx_flags & THROTTLED) {
- dbg("%s - throttled", __func__);
- break;
- }
- if (tty_buffer_request_room(tty, length) < length) {
- /* break out & wait for throttling/unthrottling to
- happen */
- dbg("%s - receive room low", __func__);
- break;
- }
-
- /* Handle errors and break */
- error_flag = TTY_NORMAL;
- /* Although the device uses a bitmask and hence can have
- multiple errors on a packet - the order here sets the
- priority the error is returned to the tty layer */
-
- if (data[packet_offset+1] & FTDI_RS_OE) {
- error_flag = TTY_OVERRUN;
- dbg("OVERRRUN error");
- }
- if (data[packet_offset+1] & FTDI_RS_BI) {
- error_flag = TTY_BREAK;
- dbg("BREAK received");
- usb_serial_handle_break(port);
- }
- if (data[packet_offset+1] & FTDI_RS_PE) {
- error_flag = TTY_PARITY;
- dbg("PARITY error");
- }
- if (data[packet_offset+1] & FTDI_RS_FE) {
- error_flag = TTY_FRAME;
- dbg("FRAMING error");
- }
- if (length > 0) {
- for (i = 2; i < length+2; i++) {
- /* Note that the error flag is duplicated for
- every character received since we don't know
- which character it applied to */
- if (!usb_serial_handle_sysrq_char(tty, port,
- data[packet_offset + i]))
- tty_insert_flip_char(tty,
- data[packet_offset + i],
- error_flag);
- }
- need_flip = 1;
- }
-
-#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
- /* if a parity error is detected you get status packets forever
- until a character is sent without a parity error.
- This doesn't work well since the application receives a
- never ending stream of bad data - even though new data
- hasn't been sent. Therefore I (bill) have taken this out.
- However - this might make sense for framing errors and so on
- so I am leaving the code in for now.
- */
- else {
- if (error_flag != TTY_NORMAL) {
- dbg("error_flag is not normal");
- /* In this case it is just status - if that is
- an error send a bad character */
- if (tty->flip.count >= TTY_FLIPBUF_SIZE)
- tty_flip_buffer_push(tty);
- tty_insert_flip_char(tty, 0xff, error_flag);
- need_flip = 1;
- }
- }
-#endif
- } /* "for(packet_offset=0..." */
-
- /* Low latency */
- if (need_flip)
+ if (count)
tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+}
- if (packet_offset < urb->actual_length) {
- /* not completely processed - record progress */
- priv->rx_processed = packet_offset;
- dbg("%s - incomplete, %d bytes processed, %d remain",
- __func__, packet_offset,
- urb->actual_length - packet_offset);
- /* check if we were throttled while processing */
- spin_lock_irqsave(&priv->rx_lock, flags);
- if (priv->rx_flags & THROTTLED) {
- priv->rx_flags |= ACTUALLY_THROTTLED;
- spin_unlock_irqrestore(&priv->rx_lock, flags);
- dbg("%s - deferring remainder until unthrottled",
- __func__);
- goto out;
- }
- spin_unlock_irqrestore(&priv->rx_lock, flags);
- /* if the port is closed stop trying to read */
- if (port->port.count > 0)
- /* delay processing of remainder */
- schedule_delayed_work(&priv->rx_work, 1);
- else
- dbg("%s - port is closed", __func__);
- goto out;
- }
-
- /* urb is completely processed */
- priv->rx_processed = 0;
+static void ftdi_read_bulk_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+ unsigned long flags;
- /* if the port is closed stop trying to read */
- if (port->port.count > 0) {
- /* Continue trying to always read */
- usb_fill_bulk_urb(port->read_urb, port->serial->dev,
- usb_rcvbulkpipe(port->serial->dev,
- port->bulk_in_endpointAddress),
- port->read_urb->transfer_buffer,
- port->read_urb->transfer_buffer_length,
- ftdi_read_bulk_callback, port);
+ dbg("%s - port %d", __func__, port->number);
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed resubmitting read urb, error %d\n",
- __func__, result);
+ if (urb->status) {
+ dbg("%s - nonzero read bulk status received: %d",
+ __func__, urb->status);
+ return;
}
-out:
- tty_kref_put(tty);
-} /* ftdi_process_read */
+ usb_serial_debug_data(debug, &port->dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+ ftdi_process_read(port);
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->throttled = port->throttle_req;
+ if (!port->throttled) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ ftdi_submit_read_urb(port, GFP_ATOMIC);
+ } else
+ spin_unlock_irqrestore(&port->lock, flags);
+}
static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
{
static void ftdi_throttle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->rx_lock, flags);
- priv->rx_flags |= THROTTLED;
- spin_unlock_irqrestore(&priv->rx_lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ port->throttle_req = 1;
+ spin_unlock_irqrestore(&port->lock, flags);
}
-
-static void ftdi_unthrottle(struct tty_struct *tty)
+void ftdi_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- struct ftdi_private *priv = usb_get_serial_port_data(port);
- int actually_throttled;
+ int was_throttled;
unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->rx_lock, flags);
- actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
- priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
- spin_unlock_irqrestore(&priv->rx_lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
+ was_throttled = port->throttled;
+ port->throttled = port->throttle_req = 0;
+ spin_unlock_irqrestore(&port->lock, flags);
- if (actually_throttled)
- schedule_delayed_work(&priv->rx_work, 0);
+ /* Resubmit urb if throttled and open. */
+ if (was_throttled && test_bit(ASYNCB_INITIALIZED, &port->port.flags))
+ ftdi_submit_read_urb(port, GFP_KERNEL);
}
static int __init ftdi_init(void)
{
struct usb_serial_port *port = tty->driver_data;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
/* set flag, data received will be put into a queue
for later processing */
- spin_lock_irqsave(&garmin_data_p->lock, flags);
+ spin_lock_irq(&garmin_data_p->lock);
garmin_data_p->flags |= FLAGS_QUEUING|FLAGS_THROTTLED;
- spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+ spin_unlock_irq(&garmin_data_p->lock);
}
{
struct usb_serial_port *port = tty->driver_data;
struct garmin_data *garmin_data_p = usb_get_serial_port_data(port);
- unsigned long flags;
int status;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&garmin_data_p->lock, flags);
+ spin_lock_irq(&garmin_data_p->lock);
garmin_data_p->flags &= ~FLAGS_THROTTLED;
- spin_unlock_irqrestore(&garmin_data_p->lock, flags);
+ spin_unlock_irq(&garmin_data_p->lock);
/* in native mode send queued data to tty, in
serial mode nothing needs to be done here */
garmin_flush_queue(garmin_data_p);
if (0 != (garmin_data_p->flags & FLAGS_BULK_IN_ACTIVE)) {
- status = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ status = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (status)
dev_err(&port->dev,
"%s - failed resubmitting read urb, error %d\n",
if (was_throttled) {
/* Resume reading from device */
- usb_serial_generic_resubmit_read_urb(port, GFP_KERNEL);
+ flush_and_resubmit_read_urb(port);
}
}
static int ipaq_startup(struct usb_serial *serial)
{
dbg("%s", __func__);
+
+ /* Some of the devices in ipaq_id_table[] are composite, and we
+ * shouldn't bind to all the interfaces. This test will rule out
+ * some obviously invalid possibilities.
+ */
+ if (serial->num_bulk_in < serial->num_ports ||
+ serial->num_bulk_out < serial->num_ports)
+ return -ENODEV;
+
if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
/*
* FIXME: HP iPaq rx3715, possibly others, have 1 config that
/* just restart the receive interrupt URB */
dbg("keyspan_pda_rx_unthrottle port %d", port->number);
port->interrupt_in_urb->dev = port->serial->dev;
- if (usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC))
+ if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL))
dbg(" usb_submit_urb(read urb) failed");
return;
}
dbg("%s - port %d", __func__, port->number);
port->read_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (result)
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
{
struct usb_serial_port *port = tty->driver_data;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
unsigned int control_state;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irq(&priv->lock);
priv->rx_flags |= THROTTLED;
if (C_CRTSCTS(tty)) {
priv->control_state &= ~TIOCM_RTS;
control_state = priv->control_state;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
(void) mct_u232_set_modem_ctrl(port->serial, control_state);
} else {
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
}
}
{
struct usb_serial_port *port = tty->driver_data;
struct mct_u232_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
unsigned int control_state;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irq(&priv->lock);
if ((priv->rx_flags & THROTTLED) && C_CRTSCTS(tty)) {
priv->rx_flags &= ~THROTTLED;
priv->control_state |= TIOCM_RTS;
control_state = priv->control_state;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
(void) mct_u232_set_modem_ctrl(port->serial, control_state);
} else {
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
}
}
struct usb_serial_port *port = tty->driver_data;
struct opticon_private *priv = usb_get_serial_data(port->serial);
unsigned long flags;
- int result;
+ int result, was_throttled;
dbg("%s - port %d", __func__, port->number);
spin_lock_irqsave(&priv->lock, flags);
priv->throttled = false;
+ was_throttled = priv->actually_throttled;
priv->actually_throttled = false;
spin_unlock_irqrestore(&priv->lock, flags);
priv->bulk_read_urb->dev = port->serial->dev;
- result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed submitting read urb, error %d\n",
+ if (was_throttled) {
+ result = usb_submit_urb(priv->bulk_read_urb, GFP_ATOMIC);
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
__func__, result);
+ }
}
static int opticon_tiocmget(struct tty_struct *tty, struct file *file)
#define HUAWEI_PRODUCT_E143D 0x143D
#define HUAWEI_PRODUCT_E143E 0x143E
#define HUAWEI_PRODUCT_E143F 0x143F
+#define HUAWEI_PRODUCT_E14AC 0x14AC
#define QUANTA_VENDOR_ID 0x0408
#define QUANTA_PRODUCT_Q101 0xEA02
#define QISDA_PRODUCT_H20_4515 0x4515
#define QISDA_PRODUCT_H20_4519 0x4519
+/* TLAYTECH PRODUCTS */
+#define TLAYTECH_VENDOR_ID 0x20B9
+#define TLAYTECH_PRODUCT_TEU800 0x1682
/* TOSHIBA PRODUCTS */
#define TOSHIBA_VENDOR_ID 0x0930
#define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302
+#define TOSHIBA_PRODUCT_G450 0x0d45
#define ALINK_VENDOR_ID 0x1e0e
#define ALINK_PRODUCT_3GU 0x9200
#define ALCATEL_VENDOR_ID 0x1bbb
#define ALCATEL_PRODUCT_X060S 0x0000
+/* Airplus products */
+#define AIRPLUS_VENDOR_ID 0x1011
+#define AIRPLUS_PRODUCT_MCD650 0x3198
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E14AC) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
+ { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
+ { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) },
+ { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
dbg("%s(): submitting interrupt urb", __func__);
port->interrupt_in_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
port->write_urb->transfer_buffer_length = count;
port->write_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
+ result = usb_submit_urb(port->write_urb, GFP_NOIO);
if (result != 0) {
dev_err(&port->dev, "%s(): usb_submit_urb() failed"
" with error %d\n", __func__, result);
/* overrun is special, not associated with a char */
if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- if (port->console && port->sysrq) {
+
+ if (tty_flag == TTY_NORMAL && !(port->console && port->sysrq))
+ tty_insert_flip_string(tty, data, urb->actual_length);
+ else {
int i;
for (i = 0; i < urb->actual_length; ++i)
if (!usb_serial_handle_sysrq_char(tty, port, data[i]))
tty_insert_flip_char(tty, data[i], tty_flag);
- } else
- tty_insert_flip_string(tty, data, urb->actual_length);
+ }
tty_flip_buffer_push(tty);
}
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.3.7"
+#define DRIVER_VERSION "v.1.3.8"
#define DRIVER_AUTHOR "Kevin Lloyd, Elina Pasheva, Matthew Safar, Rory Filer"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
int dsr_state;
int dcd_state;
int ri_state;
-
unsigned int opened:1;
};
struct sierra_port_private *portdata;
__u16 interface = 0;
int val = 0;
+ int do_send = 0;
+ int retval;
dev_dbg(&port->dev, "%s\n", __func__);
*/
if (port->interrupt_in_urb) {
/* send control message */
- return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22, 0x21, val, interface,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+ do_send = 1;
}
}
interface = 1;
else if (port->bulk_out_endpointAddress == 5)
interface = 2;
- return usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- 0x22, 0x21, val, interface,
- NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ do_send = 1;
}
- return 0;
+ if (!do_send)
+ return 0;
+
+ usb_autopm_get_interface(serial->interface);
+ retval = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, interface, NULL, 0, USB_CTRL_SET_TIMEOUT);
+ usb_autopm_put_interface(serial->interface);
+
+ return retval;
}
static void sierra_set_termios(struct tty_struct *tty,
if (serial->dev) {
mutex_lock(&serial->disc_mutex);
- if (!serial->disconnected)
+ if (!serial->disconnected) {
+ serial->interface->needs_remote_wakeup = 0;
+ usb_autopm_get_interface(serial->interface);
sierra_send_setup(port);
+ }
mutex_unlock(&serial->disc_mutex);
spin_lock_irq(&intfdata->susp_lock);
portdata->opened = 0;
sierra_release_urb(portdata->in_urbs[i]);
portdata->in_urbs[i] = NULL;
}
- usb_autopm_get_interface(serial->interface);
- serial->interface->needs_remote_wakeup = 0;
}
}
if (err) {
/* get rid of everything as in close */
sierra_close(port);
+ /* restore balance for autopm */
+ usb_autopm_put_interface(serial->interface);
return err;
}
sierra_send_setup(port);
}
}
+#ifdef CONFIG_PM
static void stop_read_write_urbs(struct usb_serial *serial)
{
- int i, j;
+ int i;
struct usb_serial_port *port;
struct sierra_port_private *portdata;
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
portdata = usb_get_serial_port_data(port);
- for (j = 0; j < N_IN_URB; j++)
- usb_kill_urb(portdata->in_urbs[j]);
+ sierra_stop_rx_urbs(port);
usb_kill_anchored_urbs(&portdata->active);
}
}
return ec ? -EIO : 0;
}
+#else
+#define sierra_suspend NULL
+#define sierra_resume NULL
+#endif
static struct usb_serial_driver sierra_device = {
.driver = {
{
struct usb_serial_port *port = tty->driver_data;
struct symbol_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irq(&priv->lock);
priv->throttled = true;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
}
static void symbol_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct symbol_private *priv = usb_get_serial_data(port->serial);
- unsigned long flags;
int result;
+ bool was_throttled;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irq(&priv->lock);
priv->throttled = false;
+ was_throttled = priv->actually_throttled;
priv->actually_throttled = false;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
priv->int_urb->dev = port->serial->dev;
- result = usb_submit_urb(priv->int_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed submitting read urb, error %d\n",
+ if (was_throttled) {
+ result = usb_submit_urb(priv->int_urb, GFP_KERNEL);
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
__func__, result);
+ }
}
static int symbol_startup(struct usb_serial *serial)
if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
- serial->type->release(serial);
+ if (serial->attached)
+ serial->type->release(serial);
/* Now that nothing is using the ports, they can be freed */
for (i = 0; i < serial->num_port_pointers; ++i) {
* This is the first place a new tty gets used. Hence this is where we
* acquire references to the usb_serial structure and the driver module,
* where we store a pointer to the port, and where we do an autoresume.
- * All these actions are reversed in serial_release().
+ * All these actions are reversed in serial_cleanup().
*/
static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
{
}
/**
- * serial_release - free resources post close/hangup
+ * serial_cleanup - free resources post close/hangup
* @port: port to free up
*
* Do the resource freeing and refcount dropping for the port.
* Avoid freeing the console.
*
- * Called when the last tty kref is dropped.
+ * Called asynchronously after the last tty kref is dropped,
+ * and the tty layer has already done the tty_shutdown(tty);
*/
-static void serial_release(struct tty_struct *tty)
+static void serial_cleanup(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct usb_serial *serial;
dbg("%s - port %d", __func__, port->number);
- /* Standard shutdown processing */
- tty_shutdown(tty);
-
tty->driver_data = NULL;
serial = port->serial;
module_put(type->driver.owner);
if (retval < 0)
goto probe_error;
+ serial->attached = 1;
if (retval > 0) {
/* quietly accept this device, but don't bind to a
serial port as it's about to disappear */
serial->num_ports = 0;
goto exit;
}
+ } else {
+ serial->attached = 1;
}
if (get_free_serial(serial, num_ports, &minor) == NULL) {
if (serial->type->suspend) {
r = serial->type->suspend(serial, message);
- if (r < 0)
+ if (r < 0) {
+ serial->suspending = 0;
goto err_out;
+ }
}
for (i = 0; i < serial->num_ports; ++i) {
.chars_in_buffer = serial_chars_in_buffer,
.tiocmget = serial_tiocmget,
.tiocmset = serial_tiocmset,
- .shutdown = serial_release,
+ .cleanup = serial_cleanup,
.install = serial_install,
.proc_fops = &serial_proc_fops,
};
tty_kref_put(tty);
}
spin_lock(&priv->lock);
- priv->bytes_in += available_room;
+ if (tty)
+ priv->bytes_in += available_room;
} else {
spin_lock(&priv->lock);
{
struct usb_serial_port *port = tty->driver_data;
struct visor_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irq(&priv->lock);
priv->throttled = 1;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
}
{
struct usb_serial_port *port = tty->driver_data;
struct visor_private *priv = usb_get_serial_port_data(port);
- unsigned long flags;
- int result;
+ int result, was_throttled;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irq(&priv->lock);
priv->throttled = 0;
+ was_throttled = priv->actually_throttled;
priv->actually_throttled = 0;
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irq(&priv->lock);
- port->read_urb->dev = port->serial->dev;
- result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
- if (result)
- dev_err(&port->dev,
- "%s - failed submitting read urb, error %d\n",
+ if (was_throttled) {
+ port->read_urb->dev = port->serial->dev;
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+ if (result)
+ dev_err(&port->dev,
+ "%s - failed submitting read urb, error %d\n",
__func__, result);
+ }
}
static int palm_os_3_probe(struct usb_serial *serial,
{
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_private *info = usb_get_serial_port_data(port);
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&info->lock, flags);
+ spin_lock_irq(&info->lock);
info->flags |= THROTTLED;
- spin_unlock_irqrestore(&info->lock, flags);
+ spin_unlock_irq(&info->lock);
return;
}
struct usb_serial_port *port = tty->driver_data;
struct whiteheat_private *info = usb_get_serial_port_data(port);
int actually_throttled;
- unsigned long flags;
dbg("%s - port %d", __func__, port->number);
- spin_lock_irqsave(&info->lock, flags);
+ spin_lock_irq(&info->lock);
actually_throttled = info->flags & ACTUALLY_THROTTLED;
info->flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
- spin_unlock_irqrestore(&info->lock, flags);
+ spin_unlock_irq(&info->lock);
if (actually_throttled)
rx_data_softint(&info->rx_work);
/* device supports and needs bigger sense buffer */
if (us->fflags & US_FL_SANE_SENSE)
sense_size = ~0;
-
+Retry_Sense:
US_DEBUGP("Issuing auto-REQUEST_SENSE\n");
scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
srb->result = DID_ABORT << 16;
goto Handle_Errors;
}
+
+ /* Some devices claim to support larger sense but fail when
+ * trying to request it. When a transport failure happens
+ * using US_FS_SANE_SENSE, we always retry with a standard
+ * (small) sense request. This fixes some USB GSM modems
+ */
+ if (temp_result == USB_STOR_TRANSPORT_FAILED &&
+ (us->fflags & US_FL_SANE_SENSE) &&
+ sense_size != US_SENSE_SIZE) {
+ US_DEBUGP("-- auto-sense failure, retry small sense\n");
+ sense_size = US_SENSE_SIZE;
+ goto Retry_Sense;
+ }
+
+ /* Other failures */
if (temp_result != USB_STOR_TRANSPORT_GOOD) {
US_DEBUGP("-- auto-sense failure\n");
/* set the result so the higher layers expect this data */
srb->result = SAM_STAT_CHECK_CONDITION;
- /* If things are really okay, then let's show that. Zero
- * out the sense buffer so the higher layers won't realize
- * we did an unsolicited auto-sense. */
- if (result == USB_STOR_TRANSPORT_GOOD &&
- /* Filemark 0, ignore EOM, ILI 0, no sense */
+ /* We often get empty sense data. This could indicate that
+ * everything worked or that there was an unspecified
+ * problem. We have to decide which.
+ */
+ if ( /* Filemark 0, ignore EOM, ILI 0, no sense */
(srb->sense_buffer[2] & 0xaf) == 0 &&
/* No ASC or ASCQ */
srb->sense_buffer[12] == 0 &&
srb->sense_buffer[13] == 0) {
- srb->result = SAM_STAT_GOOD;
- srb->sense_buffer[0] = 0x0;
+
+ /* If things are really okay, then let's show that.
+ * Zero out the sense buffer so the higher layers
+ * won't realize we did an unsolicited auto-sense.
+ */
+ if (result == USB_STOR_TRANSPORT_GOOD) {
+ srb->result = SAM_STAT_GOOD;
+ srb->sense_buffer[0] = 0x0;
+
+ /* If there was a problem, report an unspecified
+ * hardware error to prevent the higher layers from
+ * entering an infinite retry loop.
+ */
+ } else {
+ srb->result = DID_ERROR << 16;
+ srb->sense_buffer[2] = HARDWARE_ERROR;
+ }
}
}
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Sergey Pinaev <dfo@antex.ru> */
+UNUSUAL_DEV( 0x4102, 0x1059, 0x0000, 0x0000,
+ "iRiver",
+ "P7K",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64 ),
+
/*
* David Härdeman <david@2gen.com>
* The key makes the SCSI stack print confusing (but harmless) messages
{
int result, bytes, secd_size;
struct device *dev = &usb_dev->dev;
- struct usb_security_descriptor secd;
+ struct usb_security_descriptor *secd;
const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL;
- void *secd_buf;
const void *itr, *top;
char buf[64];
+ secd = kmalloc(sizeof(struct usb_security_descriptor), GFP_KERNEL);
+ if (secd == NULL) {
+ result = -ENOMEM;
+ goto out;
+ }
+
result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
- 0, &secd, sizeof(secd));
+ 0, secd, sizeof(struct usb_security_descriptor));
if (result < sizeof(secd)) {
dev_err(dev, "Can't read security descriptor or "
"not enough data: %d\n", result);
- goto error_secd;
+ goto out;
}
- secd_size = le16_to_cpu(secd.wTotalLength);
- secd_buf = kmalloc(secd_size, GFP_KERNEL);
- if (secd_buf == NULL) {
+ secd_size = le16_to_cpu(secd->wTotalLength);
+ secd = krealloc(secd, secd_size, GFP_KERNEL);
+ if (secd == NULL) {
dev_err(dev, "Can't allocate space for security descriptors\n");
- goto error_secd_alloc;
+ goto out;
}
result = usb_get_descriptor(usb_dev, USB_DT_SECURITY,
- 0, secd_buf, secd_size);
+ 0, secd, secd_size);
if (result < secd_size) {
dev_err(dev, "Can't read security descriptor or "
"not enough data: %d\n", result);
- goto error_secd_all;
+ goto out;
}
bytes = 0;
- itr = secd_buf + sizeof(secd);
- top = secd_buf + result;
+ itr = &secd[1];
+ top = (void *)secd + result;
while (itr < top) {
etd = itr;
if (top - itr < sizeof(*etd)) {
dev_err(dev, "WUSB device doesn't support CCM1 encryption, "
"can't use!\n");
result = -EINVAL;
- goto error_no_ccm1;
+ goto out;
}
wusb_dev->ccm1_etd = *ccm1_etd;
dev_dbg(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n",
buf, wusb_et_name(ccm1_etd->bEncryptionType),
ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex);
result = 0;
- kfree(secd_buf);
out:
+ kfree(secd);
return result;
-
-
-error_no_ccm1:
-error_secd_all:
- kfree(secd_buf);
-error_secd_alloc:
-error_secd:
- goto out;
}
void wusb_dev_sec_rm(struct wusb_dev *wusb_dev)
return ret < 0 ? ret : len;
}
-static struct file_operations command_fops = {
+static const struct file_operations command_fops = {
.open = command_open,
.write = command_write,
.read = NULL,
return single_open(file, reservations_print, inode->i_private);
}
-static struct file_operations reservations_fops = {
+static const struct file_operations reservations_fops = {
.open = reservations_open,
.read = seq_read,
.llseek = seq_lseek,
return single_open(file, drp_avail_print, inode->i_private);
}
-static struct file_operations drp_avail_fops = {
+static const struct file_operations drp_avail_fops = {
.open = drp_avail_open,
.read = seq_read,
.llseek = seq_lseek,
#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/sched.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
Say y here to support the LCD panels usually found on SHARP
corgi (C7x0) and spitz (Cxx00) models.
+config LCD_LMS283GF05
+ tristate "Samsung LMS283GF05 LCD"
+ depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+ help
+ SPI driver for Samsung LMS283GF05. This provides basic support
+ for powering the LCD up/down through a sysfs interface.
+
config LCD_LTV350QV
tristate "Samsung LTV350QV LCD Panel"
depends on LCD_CLASS_DEVICE && SPI_MASTER
help
If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
backlight driver.
+
+config BACKLIGHT_WM831X
+ tristate "WM831x PMIC Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X
+ help
+ If you have a backlight driven by the ISINK and DCDC of a
+ WM831x PMIC say y to enable the backlight driver for it.
+
+config BACKLIGHT_ADX
+ tristate "Avionic Design Xanthos Backlight Driver"
+ depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX
+ default y
+ help
+ Say Y to enable the backlight driver on Avionic Design Xanthos-based
+ boards.
+
+config BACKLIGHT_ADP5520
+ tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
+ depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520
+ help
+ If you have a LCD backlight connected to the BST/BL_SNK output of
+ ADP5520 or ADP5501, say Y here to enable this driver.
+
+ To compile this driver as a module, choose M here: the module will
+ be called adp5520_bl.
+
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o
obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o
+obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o
obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
obj-$(CONFIG_LCD_ILI9320) += ili9320.o
obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
+obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
--- /dev/null
+/*
+ * Backlight driver for Analog Devices ADP5520/ADP5501 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/adp5520.h>
+
+struct adp5520_bl {
+ struct device *master;
+ struct adp5520_backlight_platfrom_data *pdata;
+ struct mutex lock;
+ unsigned long cached_daylight_max;
+ int id;
+ int current_brightness;
+};
+
+static int adp5520_bl_set(struct backlight_device *bl, int brightness)
+{
+ struct adp5520_bl *data = bl_get_data(bl);
+ struct device *master = data->master;
+ int ret = 0;
+
+ if (data->pdata->en_ambl_sens) {
+ if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) {
+ /* Disable Ambient Light auto adjust */
+ ret |= adp5520_clr_bits(master, BL_CONTROL,
+ BL_AUTO_ADJ);
+ ret |= adp5520_write(master, DAYLIGHT_MAX, brightness);
+ } else {
+ /*
+ * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+ * restore daylight l3 sysfs brightness
+ */
+ ret |= adp5520_write(master, DAYLIGHT_MAX,
+ data->cached_daylight_max);
+ ret |= adp5520_set_bits(master, BL_CONTROL,
+ BL_AUTO_ADJ);
+ }
+ } else {
+ ret |= adp5520_write(master, DAYLIGHT_MAX, brightness);
+ }
+
+ if (data->current_brightness && brightness == 0)
+ ret |= adp5520_set_bits(master,
+ MODE_STATUS, DIM_EN);
+ else if (data->current_brightness == 0 && brightness)
+ ret |= adp5520_clr_bits(master,
+ MODE_STATUS, DIM_EN);
+
+ if (!ret)
+ data->current_brightness = brightness;
+
+ return ret;
+}
+
+static int adp5520_bl_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ return adp5520_bl_set(bl, brightness);
+}
+
+static int adp5520_bl_get_brightness(struct backlight_device *bl)
+{
+ struct adp5520_bl *data = bl_get_data(bl);
+ int error;
+ uint8_t reg_val;
+
+ error = adp5520_read(data->master, BL_VALUE, ®_val);
+
+ return error ? data->current_brightness : reg_val;
+}
+
+static struct backlight_ops adp5520_bl_ops = {
+ .update_status = adp5520_bl_update_status,
+ .get_brightness = adp5520_bl_get_brightness,
+};
+
+static int adp5520_bl_setup(struct backlight_device *bl)
+{
+ struct adp5520_bl *data = bl_get_data(bl);
+ struct device *master = data->master;
+ struct adp5520_backlight_platfrom_data *pdata = data->pdata;
+ int ret = 0;
+
+ ret |= adp5520_write(master, DAYLIGHT_MAX, pdata->l1_daylight_max);
+ ret |= adp5520_write(master, DAYLIGHT_DIM, pdata->l1_daylight_dim);
+
+ if (pdata->en_ambl_sens) {
+ data->cached_daylight_max = pdata->l1_daylight_max;
+ ret |= adp5520_write(master, OFFICE_MAX, pdata->l2_office_max);
+ ret |= adp5520_write(master, OFFICE_DIM, pdata->l2_office_dim);
+ ret |= adp5520_write(master, DARK_MAX, pdata->l3_dark_max);
+ ret |= adp5520_write(master, DARK_DIM, pdata->l3_dark_dim);
+ ret |= adp5520_write(master, L2_TRIP, pdata->l2_trip);
+ ret |= adp5520_write(master, L2_HYS, pdata->l2_hyst);
+ ret |= adp5520_write(master, L3_TRIP, pdata->l3_trip);
+ ret |= adp5520_write(master, L3_HYS, pdata->l3_hyst);
+ ret |= adp5520_write(master, ALS_CMPR_CFG,
+ ALS_CMPR_CFG_VAL(pdata->abml_filt, L3_EN));
+ }
+
+ ret |= adp5520_write(master, BL_CONTROL,
+ BL_CTRL_VAL(pdata->fade_led_law, pdata->en_ambl_sens));
+
+ ret |= adp5520_write(master, BL_FADE, FADE_VAL(pdata->fade_in,
+ pdata->fade_out));
+
+ ret |= adp5520_set_bits(master, MODE_STATUS, BL_EN | DIM_EN);
+
+ return ret;
+}
+
+static ssize_t adp5520_show(struct device *dev, char *buf, int reg)
+{
+ struct adp5520_bl *data = dev_get_drvdata(dev);
+ int error;
+ uint8_t reg_val;
+
+ mutex_lock(&data->lock);
+ error = adp5520_read(data->master, reg, ®_val);
+ mutex_unlock(&data->lock);
+
+ return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp5520_store(struct device *dev, const char *buf,
+ size_t count, int reg)
+{
+ struct adp5520_bl *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->lock);
+ adp5520_write(data->master, reg, val);
+ mutex_unlock(&data->lock);
+
+ return count;
+}
+
+static ssize_t adp5520_bl_dark_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp5520_show(dev, buf, DARK_MAX);
+}
+
+static ssize_t adp5520_bl_dark_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp5520_store(dev, buf, count, DARK_MAX);
+}
+static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show,
+ adp5520_bl_dark_max_store);
+
+static ssize_t adp5520_bl_office_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp5520_show(dev, buf, OFFICE_MAX);
+}
+
+static ssize_t adp5520_bl_office_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return adp5520_store(dev, buf, count, OFFICE_MAX);
+}
+static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show,
+ adp5520_bl_office_max_store);
+
+static ssize_t adp5520_bl_daylight_max_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp5520_show(dev, buf, DAYLIGHT_MAX);
+}
+
+static ssize_t adp5520_bl_daylight_max_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct adp5520_bl *data = dev_get_drvdata(dev);
+
+ strict_strtoul(buf, 10, &data->cached_daylight_max);
+ return adp5520_store(dev, buf, count, DAYLIGHT_MAX);
+}
+static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show,
+ adp5520_bl_daylight_max_store);
+
+static ssize_t adp5520_bl_dark_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp5520_show(dev, buf, DARK_DIM);
+}
+
+static ssize_t adp5520_bl_dark_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp5520_store(dev, buf, count, DARK_DIM);
+}
+static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show,
+ adp5520_bl_dark_dim_store);
+
+static ssize_t adp5520_bl_office_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp5520_show(dev, buf, OFFICE_DIM);
+}
+
+static ssize_t adp5520_bl_office_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp5520_store(dev, buf, count, OFFICE_DIM);
+}
+static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show,
+ adp5520_bl_office_dim_store);
+
+static ssize_t adp5520_bl_daylight_dim_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return adp5520_show(dev, buf, DAYLIGHT_DIM);
+}
+
+static ssize_t adp5520_bl_daylight_dim_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return adp5520_store(dev, buf, count, DAYLIGHT_DIM);
+}
+static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show,
+ adp5520_bl_daylight_dim_store);
+
+static struct attribute *adp5520_bl_attributes[] = {
+ &dev_attr_dark_max.attr,
+ &dev_attr_dark_dim.attr,
+ &dev_attr_office_max.attr,
+ &dev_attr_office_dim.attr,
+ &dev_attr_daylight_max.attr,
+ &dev_attr_daylight_dim.attr,
+ NULL
+};
+
+static const struct attribute_group adp5520_bl_attr_group = {
+ .attrs = adp5520_bl_attributes,
+};
+
+static int __devinit adp5520_bl_probe(struct platform_device *pdev)
+{
+ struct backlight_device *bl;
+ struct adp5520_bl *data;
+ int ret = 0;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->master = pdev->dev.parent;
+ data->pdata = pdev->dev.platform_data;
+
+ if (data->pdata == NULL) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ kfree(data);
+ return -ENODEV;
+ }
+
+ data->id = pdev->id;
+ data->current_brightness = 0;
+
+ mutex_init(&data->lock);
+
+ bl = backlight_device_register(pdev->name, data->master,
+ data, &adp5520_bl_ops);
+ if (IS_ERR(bl)) {
+ dev_err(&pdev->dev, "failed to register backlight\n");
+ kfree(data);
+ return PTR_ERR(bl);
+ }
+
+ bl->props.max_brightness =
+ bl->props.brightness = ADP5020_MAX_BRIGHTNESS;
+
+ if (data->pdata->en_ambl_sens)
+ ret = sysfs_create_group(&bl->dev.kobj,
+ &adp5520_bl_attr_group);
+
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register sysfs\n");
+ backlight_device_unregister(bl);
+ kfree(data);
+ }
+
+ platform_set_drvdata(pdev, bl);
+ ret |= adp5520_bl_setup(bl);
+ backlight_update_status(bl);
+
+ return ret;
+}
+
+static int __devexit adp5520_bl_remove(struct platform_device *pdev)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ struct adp5520_bl *data = bl_get_data(bl);
+
+ adp5520_clr_bits(data->master, MODE_STATUS, BL_EN);
+
+ if (data->pdata->en_ambl_sens)
+ sysfs_remove_group(&bl->dev.kobj,
+ &adp5520_bl_attr_group);
+
+ backlight_device_unregister(bl);
+ kfree(data);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp5520_bl_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ return adp5520_bl_set(bl, 0);
+}
+
+static int adp5520_bl_resume(struct platform_device *pdev)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+
+ backlight_update_status(bl);
+ return 0;
+}
+#else
+#define adp5520_bl_suspend NULL
+#define adp5520_bl_resume NULL
+#endif
+
+static struct platform_driver adp5520_bl_driver = {
+ .driver = {
+ .name = "adp5520-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = adp5520_bl_probe,
+ .remove = __devexit_p(adp5520_bl_remove),
+ .suspend = adp5520_bl_suspend,
+ .resume = adp5520_bl_resume,
+};
+
+static int __init adp5520_bl_init(void)
+{
+ return platform_driver_register(&adp5520_bl_driver);
+}
+module_init(adp5520_bl_init);
+
+static void __exit adp5520_bl_exit(void)
+{
+ platform_driver_unregister(&adp5520_bl_driver);
+}
+module_exit(adp5520_bl_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5520(01) Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-backlight");
--- /dev/null
+/*
+ * linux/drivers/video/backlight/adx.c
+ *
+ * Copyright (C) 2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Written by Thierry Reding <thierry.reding@avionic-design.de>
+ */
+
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/* register definitions */
+#define ADX_BACKLIGHT_CONTROL 0x00
+#define ADX_BACKLIGHT_CONTROL_ENABLE (1 << 0)
+#define ADX_BACKLIGHT_BRIGHTNESS 0x08
+#define ADX_BACKLIGHT_STATUS 0x10
+#define ADX_BACKLIGHT_ERROR 0x18
+
+struct adxbl {
+ void __iomem *base;
+};
+
+static int adx_backlight_update_status(struct backlight_device *bldev)
+{
+ struct adxbl *bl = bl_get_data(bldev);
+ u32 value;
+
+ value = bldev->props.brightness;
+ writel(value, bl->base + ADX_BACKLIGHT_BRIGHTNESS);
+
+ value = readl(bl->base + ADX_BACKLIGHT_CONTROL);
+
+ if (bldev->props.state & BL_CORE_FBBLANK)
+ value &= ~ADX_BACKLIGHT_CONTROL_ENABLE;
+ else
+ value |= ADX_BACKLIGHT_CONTROL_ENABLE;
+
+ writel(value, bl->base + ADX_BACKLIGHT_CONTROL);
+
+ return 0;
+}
+
+static int adx_backlight_get_brightness(struct backlight_device *bldev)
+{
+ struct adxbl *bl = bl_get_data(bldev);
+ u32 brightness;
+
+ brightness = readl(bl->base + ADX_BACKLIGHT_BRIGHTNESS);
+ return brightness & 0xff;
+}
+
+static int adx_backlight_check_fb(struct fb_info *fb)
+{
+ return 1;
+}
+
+static struct backlight_ops adx_backlight_ops = {
+ .options = 0,
+ .update_status = adx_backlight_update_status,
+ .get_brightness = adx_backlight_get_brightness,
+ .check_fb = adx_backlight_check_fb,
+};
+
+static int __devinit adx_backlight_probe(struct platform_device *pdev)
+{
+ struct backlight_device *bldev;
+ struct resource *res;
+ struct adxbl *bl;
+ int ret = 0;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), res->name);
+ if (!res) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL);
+ if (!bl) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ bl->base = devm_ioremap_nocache(&pdev->dev, res->start,
+ resource_size(res));
+ if (!bl->base) {
+ ret = -ENXIO;
+ goto out;
+ }
+
+ bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, bl,
+ &adx_backlight_ops);
+ if (!bldev) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ bldev->props.max_brightness = 0xff;
+ bldev->props.brightness = 0xff;
+ bldev->props.power = FB_BLANK_UNBLANK;
+
+ platform_set_drvdata(pdev, bldev);
+
+out:
+ return ret;
+}
+
+static int __devexit adx_backlight_remove(struct platform_device *pdev)
+{
+ struct backlight_device *bldev;
+ int ret = 0;
+
+ bldev = platform_get_drvdata(pdev);
+ bldev->props.power = FB_BLANK_UNBLANK;
+ bldev->props.brightness = 0xff;
+ backlight_update_status(bldev);
+ backlight_device_unregister(bldev);
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
+}
+
+#ifdef CONFIG_PM
+static int adx_backlight_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ return 0;
+}
+
+static int adx_backlight_resume(struct platform_device *pdev)
+{
+ return 0;
+}
+#else
+#define adx_backlight_suspend NULL
+#define adx_backlight_resume NULL
+#endif
+
+static struct platform_driver adx_backlight_driver = {
+ .probe = adx_backlight_probe,
+ .remove = __devexit_p(adx_backlight_remove),
+ .suspend = adx_backlight_suspend,
+ .resume = adx_backlight_resume,
+ .driver = {
+ .name = "adx-backlight",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init adx_backlight_init(void)
+{
+ return platform_driver_register(&adx_backlight_driver);
+}
+
+static void __exit adx_backlight_exit(void)
+{
+ platform_driver_unregister(&adx_backlight_driver);
+}
+
+module_init(adx_backlight_init);
+module_exit(adx_backlight_exit);
+
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_DESCRIPTION("Avionic Design Xanthos Backlight Driver");
+MODULE_LICENSE("GPL v2");
}
#endif /* CONFIG_FB */
+static void backlight_generate_event(struct backlight_device *bd,
+ enum backlight_update_reason reason)
+{
+ char *envp[2];
+
+ switch (reason) {
+ case BACKLIGHT_UPDATE_SYSFS:
+ envp[0] = "SOURCE=sysfs";
+ break;
+ case BACKLIGHT_UPDATE_HOTKEY:
+ envp[0] = "SOURCE=hotkey";
+ break;
+ default:
+ envp[0] = "SOURCE=unknown";
+ break;
+ }
+ envp[1] = NULL;
+ kobject_uevent_env(&bd->dev.kobj, KOBJ_CHANGE, envp);
+ sysfs_notify(&bd->dev.kobj, NULL, "actual_brightness");
+}
+
static ssize_t backlight_show_power(struct device *dev,
struct device_attribute *attr,char *buf)
{
}
mutex_unlock(&bd->ops_lock);
+ backlight_generate_event(bd, BACKLIGHT_UPDATE_SYSFS);
+
return rc;
}
__ATTR_NULL,
};
+/**
+ * backlight_force_update - tell the backlight subsystem that hardware state
+ * has changed
+ * @bd: the backlight device to update
+ *
+ * Updates the internal state of the backlight in response to a hardware event,
+ * and generate a uevent to notify userspace
+ */
+void backlight_force_update(struct backlight_device *bd,
+ enum backlight_update_reason reason)
+{
+ mutex_lock(&bd->ops_lock);
+ if (bd->ops && bd->ops->get_brightness)
+ bd->props.brightness = bd->ops->get_brightness(bd);
+ mutex_unlock(&bd->ops_lock);
+ backlight_generate_event(bd, reason);
+}
+EXPORT_SYMBOL(backlight_force_update);
+
/**
* backlight_device_register - create and register a new object of
* backlight_device class.
}
#ifdef CONFIG_PM
-static int da903x_backlight_suspend(struct platform_device *pdev,
- pm_message_t state)
+static int da903x_backlight_suspend(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct backlight_device *bl = platform_get_drvdata(pdev);
return da903x_backlight_set(bl, 0);
}
-static int da903x_backlight_resume(struct platform_device *pdev)
+static int da903x_backlight_resume(struct device *dev)
{
+ struct platform_device *pdev = to_platform_device(dev);
struct backlight_device *bl = platform_get_drvdata(pdev);
backlight_update_status(bl);
return 0;
}
-#else
-#define da903x_backlight_suspend NULL
-#define da903x_backlight_resume NULL
+
+static struct dev_pm_ops da903x_backlight_pm_ops = {
+ .suspend = da903x_backlight_suspend,
+ .resume = da903x_backlight_resume,
+};
#endif
static struct platform_driver da903x_backlight_driver = {
.driver = {
.name = "da903x-backlight",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &da903x_backlight_pm_ops,
+#endif
},
.probe = da903x_backlight_probe,
.remove = da903x_backlight_remove,
- .suspend = da903x_backlight_suspend,
- .resume = da903x_backlight_resume,
};
static int __init da903x_backlight_init(void)
.update_status = hp680bl_set_intensity,
};
-static int __init hp680bl_probe(struct platform_device *pdev)
+static int __devinit hp680bl_probe(struct platform_device *pdev)
{
struct backlight_device *bd;
--- /dev/null
+/*
+ * lms283gf05.c -- support for Samsung LMS283GF05 LCD
+ *
+ * Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/lcd.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/lms283gf05.h>
+
+struct lms283gf05_state {
+ struct spi_device *spi;
+ struct lcd_device *ld;
+};
+
+struct lms283gf05_seq {
+ unsigned char reg;
+ unsigned short value;
+ unsigned char delay;
+};
+
+/* Magic sequences supplied by manufacturer, for details refer to datasheet */
+static struct lms283gf05_seq disp_initseq[] = {
+ /* REG, VALUE, DELAY */
+ { 0x07, 0x0000, 0 },
+ { 0x13, 0x0000, 10 },
+
+ { 0x11, 0x3004, 0 },
+ { 0x14, 0x200F, 0 },
+ { 0x10, 0x1a20, 0 },
+ { 0x13, 0x0040, 50 },
+
+ { 0x13, 0x0060, 0 },
+ { 0x13, 0x0070, 200 },
+
+ { 0x01, 0x0127, 0 },
+ { 0x02, 0x0700, 0 },
+ { 0x03, 0x1030, 0 },
+ { 0x08, 0x0208, 0 },
+ { 0x0B, 0x0620, 0 },
+ { 0x0C, 0x0110, 0 },
+ { 0x30, 0x0120, 0 },
+ { 0x31, 0x0127, 0 },
+ { 0x32, 0x0000, 0 },
+ { 0x33, 0x0503, 0 },
+ { 0x34, 0x0727, 0 },
+ { 0x35, 0x0124, 0 },
+ { 0x36, 0x0706, 0 },
+ { 0x37, 0x0701, 0 },
+ { 0x38, 0x0F00, 0 },
+ { 0x39, 0x0F00, 0 },
+ { 0x40, 0x0000, 0 },
+ { 0x41, 0x0000, 0 },
+ { 0x42, 0x013f, 0 },
+ { 0x43, 0x0000, 0 },
+ { 0x44, 0x013f, 0 },
+ { 0x45, 0x0000, 0 },
+ { 0x46, 0xef00, 0 },
+ { 0x47, 0x013f, 0 },
+ { 0x48, 0x0000, 0 },
+ { 0x07, 0x0015, 30 },
+
+ { 0x07, 0x0017, 0 },
+
+ { 0x20, 0x0000, 0 },
+ { 0x21, 0x0000, 0 },
+ { 0x22, 0x0000, 0 }
+};
+
+static struct lms283gf05_seq disp_pdwnseq[] = {
+ { 0x07, 0x0016, 30 },
+
+ { 0x07, 0x0004, 0 },
+ { 0x10, 0x0220, 20 },
+
+ { 0x13, 0x0060, 50 },
+
+ { 0x13, 0x0040, 50 },
+
+ { 0x13, 0x0000, 0 },
+ { 0x10, 0x0000, 0 }
+};
+
+
+static void lms283gf05_reset(unsigned long gpio, bool inverted)
+{
+ gpio_set_value(gpio, !inverted);
+ mdelay(100);
+ gpio_set_value(gpio, inverted);
+ mdelay(20);
+ gpio_set_value(gpio, !inverted);
+ mdelay(20);
+}
+
+static void lms283gf05_toggle(struct spi_device *spi,
+ struct lms283gf05_seq *seq, int sz)
+{
+ char buf[3];
+ int i;
+
+ for (i = 0; i < sz; i++) {
+ buf[0] = 0x74;
+ buf[1] = 0x00;
+ buf[2] = seq[i].reg;
+ spi_write(spi, buf, 3);
+
+ buf[0] = 0x76;
+ buf[1] = seq[i].value >> 8;
+ buf[2] = seq[i].value & 0xff;
+ spi_write(spi, buf, 3);
+
+ mdelay(seq[i].delay);
+ }
+}
+
+static int lms283gf05_power_set(struct lcd_device *ld, int power)
+{
+ struct lms283gf05_state *st = lcd_get_data(ld);
+ struct spi_device *spi = st->spi;
+ struct lms283gf05_pdata *pdata = spi->dev.platform_data;
+
+ if (power) {
+ if (pdata)
+ lms283gf05_reset(pdata->reset_gpio,
+ pdata->reset_inverted);
+ lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
+ } else {
+ lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq));
+ if (pdata)
+ gpio_set_value(pdata->reset_gpio,
+ pdata->reset_inverted);
+ }
+
+ return 0;
+}
+
+static struct lcd_ops lms_ops = {
+ .set_power = lms283gf05_power_set,
+ .get_power = NULL,
+};
+
+static int __devinit lms283gf05_probe(struct spi_device *spi)
+{
+ struct lms283gf05_state *st;
+ struct lms283gf05_pdata *pdata = spi->dev.platform_data;
+ struct lcd_device *ld;
+ int ret = 0;
+
+ if (pdata != NULL) {
+ ret = gpio_request(pdata->reset_gpio, "LMS285GF05 RESET");
+ if (ret)
+ return ret;
+
+ ret = gpio_direction_output(pdata->reset_gpio,
+ !pdata->reset_inverted);
+ if (ret)
+ goto err;
+ }
+
+ st = kzalloc(sizeof(struct lms283gf05_state), GFP_KERNEL);
+ if (st == NULL) {
+ dev_err(&spi->dev, "No memory for device state\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ld = lcd_device_register("lms283gf05", &spi->dev, st, &lms_ops);
+ if (IS_ERR(ld)) {
+ ret = PTR_ERR(ld);
+ goto err2;
+ }
+
+ st->spi = spi;
+ st->ld = ld;
+
+ dev_set_drvdata(&spi->dev, st);
+
+ /* kick in the LCD */
+ if (pdata)
+ lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted);
+ lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
+
+ return 0;
+
+err2:
+ kfree(st);
+err:
+ if (pdata != NULL)
+ gpio_free(pdata->reset_gpio);
+
+ return ret;
+}
+
+static int __devexit lms283gf05_remove(struct spi_device *spi)
+{
+ struct lms283gf05_state *st = dev_get_drvdata(&spi->dev);
+ struct lms283gf05_pdata *pdata = st->spi->dev.platform_data;
+
+ lcd_device_unregister(st->ld);
+
+ if (pdata != NULL)
+ gpio_free(pdata->reset_gpio);
+
+ kfree(st);
+
+ return 0;
+}
+
+static struct spi_driver lms283gf05_driver = {
+ .driver = {
+ .name = "lms283gf05",
+ .owner = THIS_MODULE,
+ },
+ .probe = lms283gf05_probe,
+ .remove = __devexit_p(lms283gf05_remove),
+};
+
+static __init int lms283gf05_init(void)
+{
+ return spi_register_driver(&lms283gf05_driver);
+}
+
+static __exit void lms283gf05_exit(void)
+{
+ spi_unregister_driver(&lms283gf05_driver);
+}
+
+module_init(lms283gf05_init);
+module_exit(lms283gf05_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("LCD283GF05 LCD");
+MODULE_LICENSE("GPL v2");
},
.driver_data = (void *)&intel_chipset_data,
},
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookAir 1,1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir1,1"),
+ },
+ .driver_data = (void *)&intel_chipset_data,
+ },
{
.callback = mbp_dmi_match,
.ident = "MacBook 5,1",
},
.driver_data = (void *)&nvidia_chipset_data,
},
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBook 5,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
{
.callback = mbp_dmi_match,
.ident = "MacBookAir 2,1",
},
.driver_data = (void *)&nvidia_chipset_data,
},
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookPro 5,2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,2"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
+ {
+ .callback = mbp_dmi_match,
+ .ident = "MacBookPro 5,5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,5"),
+ },
+ .driver_data = (void *)&nvidia_chipset_data,
+ },
{ }
};
--- /dev/null
+/*
+ * Backlight driver for Wolfson Microelectronics WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectonics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+struct wm831x_backlight_data {
+ struct wm831x *wm831x;
+ int isink_reg;
+ int current_brightness;
+};
+
+static int wm831x_backlight_set(struct backlight_device *bl, int brightness)
+{
+ struct wm831x_backlight_data *data = bl_get_data(bl);
+ struct wm831x *wm831x = data->wm831x;
+ int power_up = !data->current_brightness && brightness;
+ int power_down = data->current_brightness && !brightness;
+ int ret;
+
+ if (power_up) {
+ /* Enable the ISINK */
+ ret = wm831x_set_bits(wm831x, data->isink_reg,
+ WM831X_CS1_ENA, WM831X_CS1_ENA);
+ if (ret < 0)
+ goto err;
+
+ /* Enable the DC-DC */
+ ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
+ WM831X_DC4_ENA, WM831X_DC4_ENA);
+ if (ret < 0)
+ goto err;
+ }
+
+ if (power_down) {
+ /* DCDC first */
+ ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
+ WM831X_DC4_ENA, 0);
+ if (ret < 0)
+ goto err;
+
+ /* ISINK */
+ ret = wm831x_set_bits(wm831x, data->isink_reg,
+ WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0);
+ if (ret < 0)
+ goto err;
+ }
+
+ /* Set the new brightness */
+ ret = wm831x_set_bits(wm831x, data->isink_reg,
+ WM831X_CS1_ISEL_MASK, brightness);
+ if (ret < 0)
+ goto err;
+
+ if (power_up) {
+ /* Drive current through the ISINK */
+ ret = wm831x_set_bits(wm831x, data->isink_reg,
+ WM831X_CS1_DRIVE, WM831X_CS1_DRIVE);
+ if (ret < 0)
+ return ret;
+ }
+
+ data->current_brightness = brightness;
+
+ return 0;
+
+err:
+ /* If we were in the middle of a power transition always shut down
+ * for safety.
+ */
+ if (power_up || power_down) {
+ wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
+ wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0);
+ }
+
+ return ret;
+}
+
+static int wm831x_backlight_update_status(struct backlight_device *bl)
+{
+ int brightness = bl->props.brightness;
+
+ if (bl->props.power != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+ brightness = 0;
+
+ if (bl->props.state & BL_CORE_SUSPENDED)
+ brightness = 0;
+
+ return wm831x_backlight_set(bl, brightness);
+}
+
+static int wm831x_backlight_get_brightness(struct backlight_device *bl)
+{
+ struct wm831x_backlight_data *data = bl_get_data(bl);
+ return data->current_brightness;
+}
+
+static struct backlight_ops wm831x_backlight_ops = {
+ .options = BL_CORE_SUSPENDRESUME,
+ .update_status = wm831x_backlight_update_status,
+ .get_brightness = wm831x_backlight_get_brightness,
+};
+
+static int wm831x_backlight_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *wm831x_pdata;
+ struct wm831x_backlight_pdata *pdata;
+ struct wm831x_backlight_data *data;
+ struct backlight_device *bl;
+ int ret, i, max_isel, isink_reg, dcdc_cfg;
+
+ /* We need platform data */
+ if (pdev->dev.parent->platform_data) {
+ wm831x_pdata = pdev->dev.parent->platform_data;
+ pdata = wm831x_pdata->backlight;
+ } else {
+ pdata = NULL;
+ }
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data supplied\n");
+ return -EINVAL;
+ }
+
+ /* Figure out the maximum current we can use */
+ for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) {
+ if (wm831x_isinkv_values[i] > pdata->max_uA)
+ break;
+ }
+
+ if (i == 0) {
+ dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA);
+ return -EINVAL;
+ }
+ max_isel = i - 1;
+
+ if (pdata->max_uA != wm831x_isinkv_values[max_isel])
+ dev_warn(&pdev->dev,
+ "Maximum current is %duA not %duA as requested\n",
+ wm831x_isinkv_values[max_isel], pdata->max_uA);
+
+ switch (pdata->isink) {
+ case 1:
+ isink_reg = WM831X_CURRENT_SINK_1;
+ dcdc_cfg = 0;
+ break;
+ case 2:
+ isink_reg = WM831X_CURRENT_SINK_2;
+ dcdc_cfg = WM831X_DC4_FBSRC;
+ break;
+ default:
+ dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink);
+ return -EINVAL;
+ }
+
+ /* Configure the ISINK to use for feedback */
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret < 0)
+ return ret;
+
+ ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC,
+ dcdc_cfg);
+
+ wm831x_reg_lock(wm831x);
+ if (ret < 0)
+ return ret;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->wm831x = wm831x;
+ data->current_brightness = 0;
+ data->isink_reg = isink_reg;
+
+ bl = backlight_device_register("wm831x", &pdev->dev,
+ data, &wm831x_backlight_ops);
+ if (IS_ERR(bl)) {
+ dev_err(&pdev->dev, "failed to register backlight\n");
+ kfree(data);
+ return PTR_ERR(bl);
+ }
+
+ bl->props.max_brightness = max_isel;
+ bl->props.brightness = max_isel;
+
+ platform_set_drvdata(pdev, bl);
+
+ /* Disable the DCDC if it was started so we can bootstrap */
+ wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
+
+
+ backlight_update_status(bl);
+
+ return 0;
+}
+
+static int wm831x_backlight_remove(struct platform_device *pdev)
+{
+ struct backlight_device *bl = platform_get_drvdata(pdev);
+ struct wm831x_backlight_data *data = bl_get_data(bl);
+
+ backlight_device_unregister(bl);
+ kfree(data);
+ return 0;
+}
+
+static struct platform_driver wm831x_backlight_driver = {
+ .driver = {
+ .name = "wm831x-backlight",
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_backlight_probe,
+ .remove = wm831x_backlight_remove,
+};
+
+static int __init wm831x_backlight_init(void)
+{
+ return platform_driver_register(&wm831x_backlight_driver);
+}
+module_init(wm831x_backlight_init);
+
+static void __exit wm831x_backlight_exit(void)
+{
+ platform_driver_unregister(&wm831x_backlight_driver);
+}
+module_exit(wm831x_backlight_exit);
+
+MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-backlight");
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/uaccess.h>
-#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/clk.h>
#include <video/da8xx-fb.h>
return 0;
}
-static struct vm_operations_struct fb_deferred_io_vm_ops = {
+static const struct vm_operations_struct fb_deferred_io_vm_ops = {
.fault = fb_deferred_io_fault,
.page_mkwrite = fb_deferred_io_mkwrite,
};
global = 1;
}
- if (!global && !strstr(options, "fb:")) {
+ if (!global && !strchr(options, ':')) {
fb_mode_option = options;
global = 1;
}
#include <mach/msm_iomap.h>
#include <mach/irqs.h>
#include <mach/board.h>
-#include <linux/delay.h>
-
#include <mach/msm_fb.h>
#include "mddi_hw.h"
};
/* These need to be saved / restored separately from the rest. */
-static struct blizzard_reg_list blizzard_pll_regs[] = {
+static const struct blizzard_reg_list blizzard_pll_regs[] = {
{
.start = 0x04, /* Don't save PLL ctrl (0x0C) */
.end = 0x0a,
},
};
-static struct blizzard_reg_list blizzard_gen_regs[] = {
+static const struct blizzard_reg_list blizzard_gen_regs[] = {
{
.start = 0x18, /* SDRAM control */
.end = 0x20,
struct omapfb_device *fbdev;
struct lcd_ctrl_extif *extif;
- struct lcd_ctrl *int_ctrl;
+ const struct lcd_ctrl *int_ctrl;
void (*power_up)(struct device *dev);
void (*power_down)(struct device *dev);
(1 << OMAPFB_COLOR_YUV420);
}
-static void _save_regs(struct blizzard_reg_list *list, int cnt)
+static void _save_regs(const struct blizzard_reg_list *list, int cnt)
{
int i;
}
}
-static void _restore_regs(struct blizzard_reg_list *list, int cnt)
+static void _restore_regs(const struct blizzard_reg_list *list, int cnt)
{
int i;
atomic_dec(&dispc.map_count[plane]);
}
-static struct vm_operations_struct mmap_user_ops = {
+static const struct vm_operations_struct mmap_user_ops = {
.open = mmap_user_open,
.close = mmap_user_close,
};
* Set fb_info.fix fields and also updates fbdev.
* When calling this fb_info.var must be set up already.
*/
-static void set_fb_fix(struct fb_info *fbi)
+static void set_fb_fix(struct fb_info *fbi, int from_init)
{
struct fb_fix_screeninfo *fix = &fbi->fix;
struct fb_var_screeninfo *var = &fbi->var;
rg = &plane->fbdev->mem_desc.region[plane->idx];
fbi->screen_base = rg->vaddr;
- mutex_lock(&fbi->mm_lock);
- fix->smem_start = rg->paddr;
- fix->smem_len = rg->size;
- mutex_unlock(&fbi->mm_lock);
+
+ if (!from_init) {
+ mutex_lock(&fbi->mm_lock);
+ fix->smem_start = rg->paddr;
+ fix->smem_len = rg->size;
+ mutex_unlock(&fbi->mm_lock);
+ } else {
+ fix->smem_start = rg->paddr;
+ fix->smem_len = rg->size;
+ }
fix->type = FB_TYPE_PACKED_PIXELS;
bpp = var->bits_per_pixel;
int r = 0;
omapfb_rqueue_lock(fbdev);
- set_fb_fix(fbi);
+ set_fb_fix(fbi, 0);
r = ctrl_change_mode(fbi);
omapfb_rqueue_unlock(fbdev);
if (old_size != size) {
if (size) {
memcpy(&fbi->var, new_var, sizeof(fbi->var));
- set_fb_fix(fbi);
+ set_fb_fix(fbi, 0);
} else {
/*
* Set these explicitly to indicate that the
var->bits_per_pixel = fbdev->panel->bpp;
set_fb_var(info, var);
- set_fb_fix(info);
+ set_fb_fix(info, 1);
r = fb_alloc_cmap(&info->cmap, 16, 0);
if (r != 0)
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int pxafb_suspend(struct platform_device *dev, pm_message_t state)
+static int pxafb_suspend(struct device *dev)
{
- struct pxafb_info *fbi = platform_get_drvdata(dev);
+ struct pxafb_info *fbi = dev_get_drvdata(dev);
set_ctrlr_state(fbi, C_DISABLE_PM);
return 0;
}
-static int pxafb_resume(struct platform_device *dev)
+static int pxafb_resume(struct device *dev)
{
- struct pxafb_info *fbi = platform_get_drvdata(dev);
+ struct pxafb_info *fbi = dev_get_drvdata(dev);
set_ctrlr_state(fbi, C_ENABLE_PM);
return 0;
}
-#else
-#define pxafb_suspend NULL
-#define pxafb_resume NULL
+
+static struct dev_pm_ops pxafb_pm_ops = {
+ .suspend = pxafb_suspend,
+ .resume = pxafb_resume,
+};
#endif
static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi)
goto failed;
}
+ if (cpu_is_pxa3xx() && inf->acceleration_enabled)
+ fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
+
fbi->backlight_power = inf->pxafb_backlight_power;
fbi->lcd_power = inf->pxafb_lcd_power;
goto failed_fbi;
}
- r = request_mem_region(r->start, r->end - r->start + 1, dev->name);
+ r = request_mem_region(r->start, resource_size(r), dev->name);
if (r == NULL) {
dev_err(&dev->dev, "failed to request I/O memory\n");
ret = -EBUSY;
goto failed_fbi;
}
- fbi->mmio_base = ioremap(r->start, r->end - r->start + 1);
+ fbi->mmio_base = ioremap(r->start, resource_size(r));
if (fbi->mmio_base == NULL) {
dev_err(&dev->dev, "failed to map I/O memory\n");
ret = -EBUSY;
failed_free_io:
iounmap(fbi->mmio_base);
failed_free_res:
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
failed_fbi:
clk_put(fbi->clk);
platform_set_drvdata(dev, NULL);
iounmap(fbi->mmio_base);
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
- release_mem_region(r->start, r->end - r->start + 1);
+ release_mem_region(r->start, resource_size(r));
clk_put(fbi->clk);
kfree(fbi);
static struct platform_driver pxafb_driver = {
.probe = pxafb_probe,
.remove = __devexit_p(pxafb_remove),
- .suspend = pxafb_suspend,
- .resume = pxafb_resume,
.driver = {
.owner = THIS_MODULE,
.name = "pxa2xx-fb",
+#ifdef CONFIG_PM
+ .pm = &pxafb_pm_ops,
+#endif
},
};
* find the kernel part of the task struct, copy the registers and
* the buffer contents and then complete the task.
*/
-static void uvesafb_cn_callback(struct cn_msg *msg)
+static void uvesafb_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
struct uvesafb_task *utask;
struct uvesafb_ktask *task;
+ if (!cap_raised(nsp->eff_cap, CAP_SYS_ADMIN))
+ return;
+
if (msg->seq >= UVESAFB_TASKS_MAX)
return;
*/
//#define DEBUG
#include <linux/virtio.h>
-#include <linux/virtio_ids.h>
#include <linux/virtio_balloon.h>
#include <linux/swap.h>
#include <linux/kthread.h>
return err;
}
-static void virtballoon_remove(struct virtio_device *vdev)
+static void __devexit virtballoon_remove(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
err = PTR_ERR(vqs[i]);
goto error_find;
}
+
+ if (!vp_dev->per_vq_vectors || msix_vec == VIRTIO_MSI_NO_VECTOR)
+ continue;
+
/* allocate per-vq irq if available and necessary */
- if (vp_dev->per_vq_vectors) {
- snprintf(vp_dev->msix_names[msix_vec],
- sizeof *vp_dev->msix_names,
- "%s-%s",
- dev_name(&vp_dev->vdev.dev), names[i]);
- err = request_irq(msix_vec, vring_interrupt, 0,
- vp_dev->msix_names[msix_vec],
- vqs[i]);
- if (err) {
- vp_del_vq(vqs[i]);
- goto error_find;
- }
+ snprintf(vp_dev->msix_names[msix_vec],
+ sizeof *vp_dev->msix_names,
+ "%s-%s",
+ dev_name(&vp_dev->vdev.dev), names[i]);
+ err = request_irq(vp_dev->msix_entries[msix_vec].vector,
+ vring_interrupt, 0,
+ vp_dev->msix_names[msix_vec],
+ vqs[i]);
+ if (err) {
+ vp_del_vq(vqs[i]);
+ goto error_find;
}
}
return 0;
return NULL;
}
+ /* Only get used array entries after they have been exposed by host. */
+ rmb();
+
i = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].id;
*len = vq->vring.used->ring[vq->last_used_idx%vq->vring.num].len;
dev->mem_start = mem_res->start;
dev->mem_end = mem_res->end;
- len = regs_res->end - regs_res->start;
+ len = resource_size(regs_res);
if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) {
printk(KERN_ERR "%s: Can't request vlynq registers\n",
dev_name(&dev->dev));
#include "../w1.h"
#include "../w1_int.h"
-/**
- * Address is selected using 2 pins, resulting in 4 possible addresses.
- * 0x18, 0x19, 0x1a, 0x1b
- * However, the chip cannot be detected without doing an i2c write,
- * so use the force module parameter.
- */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/**
- * Insmod parameters
- */
-I2C_CLIENT_INSMOD_1(ds2482);
-
/**
* The DS2482 registers - there are 3 registers that are addressed by a read
* pointer. The read pointer is set by the last command executed.
static int ds2482_probe(struct i2c_client *client,
const struct i2c_device_id *id);
-static int ds2482_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info);
static int ds2482_remove(struct i2c_client *client);
.probe = ds2482_probe,
.remove = ds2482_remove,
.id_table = ds2482_id,
- .detect = ds2482_detect,
- .address_data = &addr_data,
};
/*
}
-static int ds2482_detect(struct i2c_client *client, int kind,
- struct i2c_board_info *info)
-{
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
- I2C_FUNC_SMBUS_BYTE))
- return -ENODEV;
-
- strlcpy(info->type, "ds2482", I2C_NAME_SIZE);
-
- return 0;
-}
-
static int ds2482_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int temp1;
int idx;
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+ I2C_FUNC_SMBUS_BYTE))
+ return -ENODEV;
+
if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
err = -ENOMEM;
goto exit;
return error;
}
-static void w1_cn_callback(struct cn_msg *msg)
+static void w1_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
struct w1_netlink_msg *m = (struct w1_netlink_msg *)(msg + 1);
struct w1_netlink_cmd *cmd;
To compile this driver as a module, choose M here: the
module will be called nuc900_wdt.
+config ADX_WATCHDOG
+ tristate "Avionic Design Xanthos watchdog"
+ depends on ARCH_PXA_ADX
+ help
+ Say Y here if you want support for the watchdog timer on Avionic
+ Design Xanthos boards.
+
# AVR32 Architecture
config AT32AP700X_WDT
obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
+obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
--- /dev/null
+/*
+ * Copyright (C) 2008-2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+#define WATCHDOG_NAME "adx-wdt"
+
+/* register offsets */
+#define ADX_WDT_CONTROL 0x00
+#define ADX_WDT_CONTROL_ENABLE (1 << 0)
+#define ADX_WDT_CONTROL_nRESET (1 << 1)
+#define ADX_WDT_TIMEOUT 0x08
+
+static struct platform_device *adx_wdt_dev;
+static unsigned long driver_open;
+
+#define WDT_STATE_STOP 0
+#define WDT_STATE_START 1
+
+struct adx_wdt {
+ void __iomem *base;
+ unsigned long timeout;
+ unsigned int state;
+ unsigned int wake;
+ spinlock_t lock;
+};
+
+static struct watchdog_info adx_wdt_info = {
+ .identity = "Avionic Design Xanthos Watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+};
+
+static void adx_wdt_start_locked(struct adx_wdt *wdt)
+{
+ u32 ctrl;
+
+ ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+ ctrl |= ADX_WDT_CONTROL_ENABLE;
+ writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+ wdt->state = WDT_STATE_START;
+}
+
+static void adx_wdt_start(struct adx_wdt *wdt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+ adx_wdt_start_locked(wdt);
+ spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_stop_locked(struct adx_wdt *wdt)
+{
+ u32 ctrl;
+
+ ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+ ctrl &= ~ADX_WDT_CONTROL_ENABLE;
+ writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+ wdt->state = WDT_STATE_STOP;
+}
+
+static void adx_wdt_stop(struct adx_wdt *wdt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+ adx_wdt_stop_locked(wdt);
+ spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_set_timeout(struct adx_wdt *wdt, unsigned long seconds)
+{
+ unsigned long timeout = seconds * 1000;
+ unsigned long flags;
+ unsigned int state;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+ state = wdt->state;
+ adx_wdt_stop_locked(wdt);
+ writel(timeout, wdt->base + ADX_WDT_TIMEOUT);
+
+ if (state == WDT_STATE_START)
+ adx_wdt_start_locked(wdt);
+
+ wdt->timeout = timeout;
+ spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_get_timeout(struct adx_wdt *wdt, unsigned long *seconds)
+{
+ *seconds = wdt->timeout / 1000;
+}
+
+static void adx_wdt_keepalive(struct adx_wdt *wdt)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&wdt->lock, flags);
+ writel(wdt->timeout, wdt->base + ADX_WDT_TIMEOUT);
+ spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static int adx_wdt_open(struct inode *inode, struct file *file)
+{
+ struct adx_wdt *wdt = platform_get_drvdata(adx_wdt_dev);
+
+ if (test_and_set_bit(0, &driver_open))
+ return -EBUSY;
+
+ file->private_data = wdt;
+ adx_wdt_set_timeout(wdt, 30);
+ adx_wdt_start(wdt);
+
+ return nonseekable_open(inode, file);
+}
+
+static int adx_wdt_release(struct inode *inode, struct file *file)
+{
+ struct adx_wdt *wdt = file->private_data;
+
+ adx_wdt_stop(wdt);
+ clear_bit(0, &driver_open);
+
+ return 0;
+}
+
+static long adx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+ struct adx_wdt *wdt = file->private_data;
+ void __user *argp = (void __user *)arg;
+ unsigned long __user *p = argp;
+ unsigned long seconds = 0;
+ unsigned int options;
+ long ret = -EINVAL;
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user(argp, &adx_wdt_info, sizeof(adx_wdt_info)))
+ return -EFAULT;
+ else
+ return 0;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ adx_wdt_keepalive(wdt);
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(seconds, p))
+ return -EFAULT;
+
+ adx_wdt_set_timeout(wdt, seconds);
+
+ /* fallthrough */
+ case WDIOC_GETTIMEOUT:
+ adx_wdt_get_timeout(wdt, &seconds);
+ return put_user(seconds, p);
+
+ case WDIOC_SETOPTIONS:
+ if (copy_from_user(&options, argp, sizeof(options)))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ adx_wdt_stop(wdt);
+ ret = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ adx_wdt_start(wdt);
+ ret = 0;
+ }
+
+ return ret;
+
+ default:
+ break;
+ }
+
+ return -ENOTTY;
+}
+
+static ssize_t adx_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ struct adx_wdt *wdt = file->private_data;
+
+ if (len)
+ adx_wdt_keepalive(wdt);
+
+ return len;
+}
+
+static const struct file_operations adx_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .open = adx_wdt_open,
+ .release = adx_wdt_release,
+ .unlocked_ioctl = adx_wdt_ioctl,
+ .write = adx_wdt_write,
+};
+
+static struct miscdevice adx_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &adx_wdt_fops,
+};
+
+static int __devinit adx_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct adx_wdt *wdt;
+ int ret = 0;
+ u32 ctrl;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt) {
+ dev_err(&pdev->dev, "cannot allocate WDT structure\n");
+ return -ENOMEM;
+ }
+
+ spin_lock_init(&wdt->lock);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot obtain I/O memory region\n");
+ return -ENXIO;
+ }
+
+ res = devm_request_mem_region(&pdev->dev, res->start,
+ res->end - res->start + 1, res->name);
+ if (!res) {
+ dev_err(&pdev->dev, "cannot request I/O memory region\n");
+ return -ENXIO;
+ }
+
+ wdt->base = devm_ioremap_nocache(&pdev->dev, res->start,
+ res->end - res->start + 1);
+ if (!wdt->base) {
+ dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+ return -ENXIO;
+ }
+
+ /* disable watchdog and reboot on timeout */
+ ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+ ctrl &= ~ADX_WDT_CONTROL_ENABLE;
+ ctrl &= ~ADX_WDT_CONTROL_nRESET;
+ writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+
+ platform_set_drvdata(pdev, wdt);
+ adx_wdt_dev = pdev;
+
+ ret = misc_register(&adx_wdt_miscdev);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot register miscdev on minor %d "
+ "(err=%d)\n", WATCHDOG_MINOR, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devexit adx_wdt_remove(struct platform_device *pdev)
+{
+ struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+ misc_deregister(&adx_wdt_miscdev);
+ adx_wdt_stop(wdt);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static void adx_wdt_shutdown(struct platform_device *pdev)
+{
+ struct adx_wdt *wdt = platform_get_drvdata(pdev);
+ adx_wdt_stop(wdt);
+}
+
+#ifdef CONFIG_PM
+static int adx_wdt_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+ wdt->wake = (wdt->state == WDT_STATE_START) ? 1 : 0;
+ adx_wdt_stop(wdt);
+
+ return 0;
+}
+
+static int adx_wdt_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+ if (wdt->wake)
+ adx_wdt_start(wdt);
+
+ return 0;
+}
+
+static struct dev_pm_ops adx_wdt_pm_ops = {
+ .suspend = adx_wdt_suspend,
+ .resume = adx_wdt_resume,
+};
+
+# define ADX_WDT_PM_OPS (&adx_wdt_pm_ops)
+#else
+# define ADX_WDT_PM_OPS NULL
+#endif
+
+static struct platform_driver adx_wdt_driver = {
+ .probe = adx_wdt_probe,
+ .remove = __devexit_p(adx_wdt_remove),
+ .shutdown = adx_wdt_shutdown,
+ .driver = {
+ .name = WATCHDOG_NAME,
+ .owner = THIS_MODULE,
+ .pm = ADX_WDT_PM_OPS,
+ },
+};
+
+static int __init adx_wdt_init(void)
+{
+ return platform_driver_register(&adx_wdt_driver);
+}
+
+static void __exit adx_wdt_exit(void)
+{
+ platform_driver_unregister(&adx_wdt_driver);
+}
+
+module_init(adx_wdt_init);
+module_exit(adx_wdt_exit);
+
+MODULE_DESCRIPTION("Avionic Design Xanthos Watchdog Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
dev_set_drvdata(&op->dev, p);
riowd_device = p;
- err = 0;
+ return 0;
out_iounmap:
of_iounmap(&op->resource[0], p->regs, 2);
#include <linux/fs.h>
#include <linux/poll.h>
#include <linux/mutex.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/mount.h>
#include <linux/pagemap.h>
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
e100/d102e_ucode.bin
fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
-fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis
+fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
+ cis/DP83903.cis cis/NE2K.cis \
+ cis/tamarack.cis cis/PE-200.cis
fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
-fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis
+fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
+ cis/COMpad2.cis cis/COMpad4.cis \
+ cis/SW_555_SER.cis cis/SW_7xx_SER.cis \
+ cis/SW_8xx_SER.cis
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
advansys/3550.bin advansys/38C0800.bin
File: cis/LA-PCM.cis
cis/PCMLM28.cis
+ cis/DP83903.cis
+ cis/NE2K.cis
+ cis/tamarack.cis
+ cis/PE-200.cis
Licence: GPL
File: cis/MT5634ZLX.cis
cis/RS-COM-2P.cis
+ cis/COMpad2.cis
+ cis/COMpad4.cis
+ cis/SW_555_SER.cis
+ cis/SW_7xx_SER.cis
+ cis/SW_8xx_SER.cis
Licence: GPL
--- /dev/null
+:1000000001030000FF151F0401414456414E5445B1
+:10001000434800434F4D7061642D33322F38350013
+:10002000312E300000FF210202011A0501050001F6
+:10003000031B0EC18118AA61E80207E8030730B864
+:100040009E1B08820108AA6030030F1B0883010869
+:10005000AA6040030F1B08840108AA6050030F1B0D
+:0D00600008850108AA6060030F1400FF006E
+:00000001FF
+#
+# Replacement CIS for Advantech COMpad-32/85
+#
--- /dev/null
+:1000000001030000FF151F0401414456414E5445B1
+:10001000434800434F4D7061642D33322F383542D1
+:100020002D34000000FF210202011A050102000127
+:10003000011B0BC18118AA6040021F30B89E1B082B
+:0C004000820108AA6040031F1400FF00AA
+:00000001FF
+#
+# Replacement CIS for Advantech COMpad-32/85B-4
+#
--- /dev/null
+:1000000001030000FF152904014D756C74696675C4
+:100010006E6374696F6E20436172640000004E531A
+:1000200043204D46204C414E2F4D6F64656D00FFBF
+:1000300020047501000021020000060B02004900A7
+:100040000000006A000000FF00130343495321022F
+:1000500006001A060517201077021B0C970179017C
+:10006000556530FFFF284000FF001303434953212B
+:100070000202001A060507401077021B09870119C2
+:0800800001552330FFFFFF00D2
+:00000001FF
+#
+# This CIS is for cards based on the National Semiconductor
+# DP83903 Multiple Function Interface Chip
+#
--- /dev/null
+:1000000001030000FF1515040150434D4349410011
+:1000100045746865726E6574000000FF2102060079
+:100020001A050120F803031B09E001190155653089
+:06003000FFFF1400FF00B9
+:00000001FF
+#
+# Replacement CIS for various busted NE2000-compatible cards
+#
--- /dev/null
+:1000000001030000FF151E0401504D582020200060
+:1000100050452D3230300045544845524E4554002D
+:1000200052303100FF210206031A050101000101CF
+:100030001B0EC181190155E051000F100F30FFFF59
+:040040001400FF00A9
+:00000001FF
+#
+# Replacement CIS for PE-200 ethernet card
+#
--- /dev/null
+:100000000101FF17034100FF20043F0110072102F7
+:100010000200152A070053696572726120576972E0
+:10002000656C657373004169724361726420353594
+:1000300035004135353500526576203100FF1A050F
+:1000400001030007731B0BE00118A360F8030730DE
+:10005000BC3F1B08A10108A360F802071B08A2010E
+:1000600008A360E803071B08A30108A360E80207D0
+:0A0070001B04A40108231400FF0084
+:00000001FF
+#
+# Replacement CIS for AC555 provided by Sierra Wireless
+#
--- /dev/null
+:100000000101FF17034100FF2004920110072102A4
+:1000100002001537070053696572726120576972D3
+:10002000656C6573730041433731302F4143373579
+:10003000300047505253204E6574776F726B2041E9
+:1000400064617074657200523100FF1A050103008B
+:1000500007731B10E00119784D555D25A360F80367
+:100060000730BC861B08A10108A360F802071B0823
+:10007000A20108A360E803071B08A30108A360E826
+:0C00800002071B04A40108231400FF0069
+:00000001FF
+#
+# Replacement CIS for AC7xx provided by Sierra Wireless
+#
--- /dev/null
+:100000000101FF17034100FF2004920110072102A4
+:100010000200152F070053696572726120576972DB
+:10002000656C657373004143383530003347204EAB
+:100030006574776F726B20416461707465720052F1
+:100040003100FF1A0501030007731B10E001197846
+:100050004D555D25A360F8480730BC861B08A101FB
+:1000600008A360F847071B08A20108A360E8480737
+:100070001B08A30108A360E847071B04A401082389
+:040080001400FF0069
+:00000001FF
+#
+# Replacement CIS for AC8xx provided by Sierra Wireless
+#
--- /dev/null
+:100000000103D400FF17034100FF152404015441EC
+:100010004D415241434B0045746865726E657400F2
+:10002000410030303437343331313830303100FF33
+:10003000210206001A050120F803031B14E08119B0
+:100040003F554D5D06864626E551000F100F30FFE7
+:05005000FF1400FF0099
+:00000001FF
+#
+# Replacement CIS for Surecom, Tamarack NE2000 cards
+#
See <http://v9fs.sf.net> for more information.
If unsure, say N.
+
+config 9P_FSCACHE
+ bool "Enable 9P client caching support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on 9P_FS=m && FSCACHE || 9P_FS=y && FSCACHE=y
+ help
+ Choose Y here to enable persistent, read-only local
+ caching support for 9p clients using FS-Cache
+
vfs_dir.o \
vfs_dentry.o \
v9fs.o \
- fid.o \
+ fid.o
+9p-$(CONFIG_9P_FSCACHE) += cache.o
--- /dev/null
+/*
+ * V9FS cache definitions.
+ *
+ * Copyright (C) 2009 by Abhishek Kulkarni <adkulkar@umail.iu.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to:
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA 02111-1301 USA
+ *
+ */
+
+#include <linux/jiffies.h>
+#include <linux/file.h>
+#include <linux/stat.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <net/9p/9p.h>
+
+#include "v9fs.h"
+#include "cache.h"
+
+#define CACHETAG_LEN 11
+
+struct kmem_cache *vcookie_cache;
+
+struct fscache_netfs v9fs_cache_netfs = {
+ .name = "9p",
+ .version = 0,
+};
+
+static void init_once(void *foo)
+{
+ struct v9fs_cookie *vcookie = (struct v9fs_cookie *) foo;
+ vcookie->fscache = NULL;
+ vcookie->qid = NULL;
+ inode_init_once(&vcookie->inode);
+}
+
+/**
+ * v9fs_init_vcookiecache - initialize a cache for vcookies to maintain
+ * vcookie to inode mapping
+ *
+ * Returns 0 on success.
+ */
+
+static int v9fs_init_vcookiecache(void)
+{
+ vcookie_cache = kmem_cache_create("vcookie_cache",
+ sizeof(struct v9fs_cookie),
+ 0, (SLAB_RECLAIM_ACCOUNT|
+ SLAB_MEM_SPREAD),
+ init_once);
+ if (!vcookie_cache)
+ return -ENOMEM;
+
+ return 0;
+}
+
+/**
+ * v9fs_destroy_vcookiecache - destroy the cache of vcookies
+ *
+ */
+
+static void v9fs_destroy_vcookiecache(void)
+{
+ kmem_cache_destroy(vcookie_cache);
+}
+
+int __v9fs_cache_register(void)
+{
+ int ret;
+ ret = v9fs_init_vcookiecache();
+ if (ret < 0)
+ return ret;
+
+ return fscache_register_netfs(&v9fs_cache_netfs);
+}
+
+void __v9fs_cache_unregister(void)
+{
+ v9fs_destroy_vcookiecache();
+ fscache_unregister_netfs(&v9fs_cache_netfs);
+}
+
+/**
+ * v9fs_random_cachetag - Generate a random tag to be associated
+ * with a new cache session.
+ *
+ * The value of jiffies is used for a fairly randomly cache tag.
+ */
+
+static
+int v9fs_random_cachetag(struct v9fs_session_info *v9ses)
+{
+ v9ses->cachetag = kmalloc(CACHETAG_LEN, GFP_KERNEL);
+ if (!v9ses->cachetag)
+ return -ENOMEM;
+
+ return scnprintf(v9ses->cachetag, CACHETAG_LEN, "%lu", jiffies);
+}
+
+static uint16_t v9fs_cache_session_get_key(const void *cookie_netfs_data,
+ void *buffer, uint16_t bufmax)
+{
+ struct v9fs_session_info *v9ses;
+ uint16_t klen = 0;
+
+ v9ses = (struct v9fs_session_info *)cookie_netfs_data;
+ P9_DPRINTK(P9_DEBUG_FSC, "session %p buf %p size %u", v9ses,
+ buffer, bufmax);
+
+ if (v9ses->cachetag)
+ klen = strlen(v9ses->cachetag);
+
+ if (klen > bufmax)
+ return 0;
+
+ memcpy(buffer, v9ses->cachetag, klen);
+ P9_DPRINTK(P9_DEBUG_FSC, "cache session tag %s", v9ses->cachetag);
+ return klen;
+}
+
+const struct fscache_cookie_def v9fs_cache_session_index_def = {
+ .name = "9P.session",
+ .type = FSCACHE_COOKIE_TYPE_INDEX,
+ .get_key = v9fs_cache_session_get_key,
+};
+
+void v9fs_cache_session_get_cookie(struct v9fs_session_info *v9ses)
+{
+ /* If no cache session tag was specified, we generate a random one. */
+ if (!v9ses->cachetag)
+ v9fs_random_cachetag(v9ses);
+
+ v9ses->fscache = fscache_acquire_cookie(v9fs_cache_netfs.primary_index,
+ &v9fs_cache_session_index_def,
+ v9ses);
+ P9_DPRINTK(P9_DEBUG_FSC, "session %p get cookie %p", v9ses,
+ v9ses->fscache);
+}
+
+void v9fs_cache_session_put_cookie(struct v9fs_session_info *v9ses)
+{
+ P9_DPRINTK(P9_DEBUG_FSC, "session %p put cookie %p", v9ses,
+ v9ses->fscache);
+ fscache_relinquish_cookie(v9ses->fscache, 0);
+ v9ses->fscache = NULL;
+}
+
+
+static uint16_t v9fs_cache_inode_get_key(const void *cookie_netfs_data,
+ void *buffer, uint16_t bufmax)
+{
+ const struct v9fs_cookie *vcookie = cookie_netfs_data;
+ memcpy(buffer, &vcookie->qid->path, sizeof(vcookie->qid->path));
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p get key %llu", &vcookie->inode,
+ vcookie->qid->path);
+ return sizeof(vcookie->qid->path);
+}
+
+static void v9fs_cache_inode_get_attr(const void *cookie_netfs_data,
+ uint64_t *size)
+{
+ const struct v9fs_cookie *vcookie = cookie_netfs_data;
+ *size = i_size_read(&vcookie->inode);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p get attr %llu", &vcookie->inode,
+ *size);
+}
+
+static uint16_t v9fs_cache_inode_get_aux(const void *cookie_netfs_data,
+ void *buffer, uint16_t buflen)
+{
+ const struct v9fs_cookie *vcookie = cookie_netfs_data;
+ memcpy(buffer, &vcookie->qid->version, sizeof(vcookie->qid->version));
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p get aux %u", &vcookie->inode,
+ vcookie->qid->version);
+ return sizeof(vcookie->qid->version);
+}
+
+static enum
+fscache_checkaux v9fs_cache_inode_check_aux(void *cookie_netfs_data,
+ const void *buffer,
+ uint16_t buflen)
+{
+ const struct v9fs_cookie *vcookie = cookie_netfs_data;
+
+ if (buflen != sizeof(vcookie->qid->version))
+ return FSCACHE_CHECKAUX_OBSOLETE;
+
+ if (memcmp(buffer, &vcookie->qid->version,
+ sizeof(vcookie->qid->version)))
+ return FSCACHE_CHECKAUX_OBSOLETE;
+
+ return FSCACHE_CHECKAUX_OKAY;
+}
+
+static void v9fs_cache_inode_now_uncached(void *cookie_netfs_data)
+{
+ struct v9fs_cookie *vcookie = cookie_netfs_data;
+ struct pagevec pvec;
+ pgoff_t first;
+ int loop, nr_pages;
+
+ pagevec_init(&pvec, 0);
+ first = 0;
+
+ for (;;) {
+ nr_pages = pagevec_lookup(&pvec, vcookie->inode.i_mapping,
+ first,
+ PAGEVEC_SIZE - pagevec_count(&pvec));
+ if (!nr_pages)
+ break;
+
+ for (loop = 0; loop < nr_pages; loop++)
+ ClearPageFsCache(pvec.pages[loop]);
+
+ first = pvec.pages[nr_pages - 1]->index + 1;
+
+ pvec.nr = nr_pages;
+ pagevec_release(&pvec);
+ cond_resched();
+ }
+}
+
+const struct fscache_cookie_def v9fs_cache_inode_index_def = {
+ .name = "9p.inode",
+ .type = FSCACHE_COOKIE_TYPE_DATAFILE,
+ .get_key = v9fs_cache_inode_get_key,
+ .get_attr = v9fs_cache_inode_get_attr,
+ .get_aux = v9fs_cache_inode_get_aux,
+ .check_aux = v9fs_cache_inode_check_aux,
+ .now_uncached = v9fs_cache_inode_now_uncached,
+};
+
+void v9fs_cache_inode_get_cookie(struct inode *inode)
+{
+ struct v9fs_cookie *vcookie;
+ struct v9fs_session_info *v9ses;
+
+ if (!S_ISREG(inode->i_mode))
+ return;
+
+ vcookie = v9fs_inode2cookie(inode);
+ if (vcookie->fscache)
+ return;
+
+ v9ses = v9fs_inode2v9ses(inode);
+ vcookie->fscache = fscache_acquire_cookie(v9ses->fscache,
+ &v9fs_cache_inode_index_def,
+ vcookie);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p get cookie %p", inode,
+ vcookie->fscache);
+}
+
+void v9fs_cache_inode_put_cookie(struct inode *inode)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ if (!vcookie->fscache)
+ return;
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p put cookie %p", inode,
+ vcookie->fscache);
+
+ fscache_relinquish_cookie(vcookie->fscache, 0);
+ vcookie->fscache = NULL;
+}
+
+void v9fs_cache_inode_flush_cookie(struct inode *inode)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ if (!vcookie->fscache)
+ return;
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p flush cookie %p", inode,
+ vcookie->fscache);
+
+ fscache_relinquish_cookie(vcookie->fscache, 1);
+ vcookie->fscache = NULL;
+}
+
+void v9fs_cache_inode_set_cookie(struct inode *inode, struct file *filp)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+ struct p9_fid *fid;
+
+ if (!vcookie->fscache)
+ return;
+
+ spin_lock(&vcookie->lock);
+ fid = filp->private_data;
+ if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
+ v9fs_cache_inode_flush_cookie(inode);
+ else
+ v9fs_cache_inode_get_cookie(inode);
+
+ spin_unlock(&vcookie->lock);
+}
+
+void v9fs_cache_inode_reset_cookie(struct inode *inode)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+ struct v9fs_session_info *v9ses;
+ struct fscache_cookie *old;
+
+ if (!vcookie->fscache)
+ return;
+
+ old = vcookie->fscache;
+
+ spin_lock(&vcookie->lock);
+ fscache_relinquish_cookie(vcookie->fscache, 1);
+
+ v9ses = v9fs_inode2v9ses(inode);
+ vcookie->fscache = fscache_acquire_cookie(v9ses->fscache,
+ &v9fs_cache_inode_index_def,
+ vcookie);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p revalidating cookie old %p new %p",
+ inode, old, vcookie->fscache);
+
+ spin_unlock(&vcookie->lock);
+}
+
+int __v9fs_fscache_release_page(struct page *page, gfp_t gfp)
+{
+ struct inode *inode = page->mapping->host;
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ BUG_ON(!vcookie->fscache);
+
+ if (PageFsCache(page)) {
+ if (fscache_check_page_write(vcookie->fscache, page)) {
+ if (!(gfp & __GFP_WAIT))
+ return 0;
+ fscache_wait_on_page_write(vcookie->fscache, page);
+ }
+
+ fscache_uncache_page(vcookie->fscache, page);
+ ClearPageFsCache(page);
+ }
+
+ return 1;
+}
+
+void __v9fs_fscache_invalidate_page(struct page *page)
+{
+ struct inode *inode = page->mapping->host;
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ BUG_ON(!vcookie->fscache);
+
+ if (PageFsCache(page)) {
+ fscache_wait_on_page_write(vcookie->fscache, page);
+ BUG_ON(!PageLocked(page));
+ fscache_uncache_page(vcookie->fscache, page);
+ ClearPageFsCache(page);
+ }
+}
+
+static void v9fs_vfs_readpage_complete(struct page *page, void *data,
+ int error)
+{
+ if (!error)
+ SetPageUptodate(page);
+
+ unlock_page(page);
+}
+
+/**
+ * __v9fs_readpage_from_fscache - read a page from cache
+ *
+ * Returns 0 if the pages are in cache and a BIO is submitted,
+ * 1 if the pages are not in cache and -error otherwise.
+ */
+
+int __v9fs_readpage_from_fscache(struct inode *inode, struct page *page)
+{
+ int ret;
+ const struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p page %p", inode, page);
+ if (!vcookie->fscache)
+ return -ENOBUFS;
+
+ ret = fscache_read_or_alloc_page(vcookie->fscache,
+ page,
+ v9fs_vfs_readpage_complete,
+ NULL,
+ GFP_KERNEL);
+ switch (ret) {
+ case -ENOBUFS:
+ case -ENODATA:
+ P9_DPRINTK(P9_DEBUG_FSC, "page/inode not in cache %d", ret);
+ return 1;
+ case 0:
+ P9_DPRINTK(P9_DEBUG_FSC, "BIO submitted");
+ return ret;
+ default:
+ P9_DPRINTK(P9_DEBUG_FSC, "ret %d", ret);
+ return ret;
+ }
+}
+
+/**
+ * __v9fs_readpages_from_fscache - read multiple pages from cache
+ *
+ * Returns 0 if the pages are in cache and a BIO is submitted,
+ * 1 if the pages are not in cache and -error otherwise.
+ */
+
+int __v9fs_readpages_from_fscache(struct inode *inode,
+ struct address_space *mapping,
+ struct list_head *pages,
+ unsigned *nr_pages)
+{
+ int ret;
+ const struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p pages %u", inode, *nr_pages);
+ if (!vcookie->fscache)
+ return -ENOBUFS;
+
+ ret = fscache_read_or_alloc_pages(vcookie->fscache,
+ mapping, pages, nr_pages,
+ v9fs_vfs_readpage_complete,
+ NULL,
+ mapping_gfp_mask(mapping));
+ switch (ret) {
+ case -ENOBUFS:
+ case -ENODATA:
+ P9_DPRINTK(P9_DEBUG_FSC, "pages/inodes not in cache %d", ret);
+ return 1;
+ case 0:
+ BUG_ON(!list_empty(pages));
+ BUG_ON(*nr_pages != 0);
+ P9_DPRINTK(P9_DEBUG_FSC, "BIO submitted");
+ return ret;
+ default:
+ P9_DPRINTK(P9_DEBUG_FSC, "ret %d", ret);
+ return ret;
+ }
+}
+
+/**
+ * __v9fs_readpage_to_fscache - write a page to the cache
+ *
+ */
+
+void __v9fs_readpage_to_fscache(struct inode *inode, struct page *page)
+{
+ int ret;
+ const struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+
+ P9_DPRINTK(P9_DEBUG_FSC, "inode %p page %p", inode, page);
+ ret = fscache_write_page(vcookie->fscache, page, GFP_KERNEL);
+ P9_DPRINTK(P9_DEBUG_FSC, "ret = %d", ret);
+ if (ret != 0)
+ v9fs_uncache_page(inode, page);
+}
--- /dev/null
+/*
+ * V9FS cache definitions.
+ *
+ * Copyright (C) 2009 by Abhishek Kulkarni <adkulkar@umail.iu.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to:
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA 02111-1301 USA
+ *
+ */
+
+#ifndef _9P_CACHE_H
+#ifdef CONFIG_9P_FSCACHE
+#include <linux/fscache.h>
+#include <linux/spinlock.h>
+
+extern struct kmem_cache *vcookie_cache;
+
+struct v9fs_cookie {
+ spinlock_t lock;
+ struct inode inode;
+ struct fscache_cookie *fscache;
+ struct p9_qid *qid;
+};
+
+static inline struct v9fs_cookie *v9fs_inode2cookie(const struct inode *inode)
+{
+ return container_of(inode, struct v9fs_cookie, inode);
+}
+
+extern struct fscache_netfs v9fs_cache_netfs;
+extern const struct fscache_cookie_def v9fs_cache_session_index_def;
+extern const struct fscache_cookie_def v9fs_cache_inode_index_def;
+
+extern void v9fs_cache_session_get_cookie(struct v9fs_session_info *v9ses);
+extern void v9fs_cache_session_put_cookie(struct v9fs_session_info *v9ses);
+
+extern void v9fs_cache_inode_get_cookie(struct inode *inode);
+extern void v9fs_cache_inode_put_cookie(struct inode *inode);
+extern void v9fs_cache_inode_flush_cookie(struct inode *inode);
+extern void v9fs_cache_inode_set_cookie(struct inode *inode, struct file *filp);
+extern void v9fs_cache_inode_reset_cookie(struct inode *inode);
+
+extern int __v9fs_cache_register(void);
+extern void __v9fs_cache_unregister(void);
+
+extern int __v9fs_fscache_release_page(struct page *page, gfp_t gfp);
+extern void __v9fs_fscache_invalidate_page(struct page *page);
+extern int __v9fs_readpage_from_fscache(struct inode *inode,
+ struct page *page);
+extern int __v9fs_readpages_from_fscache(struct inode *inode,
+ struct address_space *mapping,
+ struct list_head *pages,
+ unsigned *nr_pages);
+extern void __v9fs_readpage_to_fscache(struct inode *inode, struct page *page);
+
+
+/**
+ * v9fs_cache_register - Register v9fs file system with the cache
+ */
+static inline int v9fs_cache_register(void)
+{
+ return __v9fs_cache_register();
+}
+
+/**
+ * v9fs_cache_unregister - Unregister v9fs from the cache
+ */
+static inline void v9fs_cache_unregister(void)
+{
+ __v9fs_cache_unregister();
+}
+
+static inline int v9fs_fscache_release_page(struct page *page,
+ gfp_t gfp)
+{
+ return __v9fs_fscache_release_page(page, gfp);
+}
+
+static inline void v9fs_fscache_invalidate_page(struct page *page)
+{
+ __v9fs_fscache_invalidate_page(page);
+}
+
+static inline int v9fs_readpage_from_fscache(struct inode *inode,
+ struct page *page)
+{
+ return __v9fs_readpage_from_fscache(inode, page);
+}
+
+static inline int v9fs_readpages_from_fscache(struct inode *inode,
+ struct address_space *mapping,
+ struct list_head *pages,
+ unsigned *nr_pages)
+{
+ return __v9fs_readpages_from_fscache(inode, mapping, pages,
+ nr_pages);
+}
+
+static inline void v9fs_readpage_to_fscache(struct inode *inode,
+ struct page *page)
+{
+ if (PageFsCache(page))
+ __v9fs_readpage_to_fscache(inode, page);
+}
+
+static inline void v9fs_uncache_page(struct inode *inode, struct page *page)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+ fscache_uncache_page(vcookie->fscache, page);
+ BUG_ON(PageFsCache(page));
+}
+
+static inline void v9fs_vcookie_set_qid(struct inode *inode,
+ struct p9_qid *qid)
+{
+ struct v9fs_cookie *vcookie = v9fs_inode2cookie(inode);
+ spin_lock(&vcookie->lock);
+ vcookie->qid = qid;
+ spin_unlock(&vcookie->lock);
+}
+
+#else /* CONFIG_9P_FSCACHE */
+
+static inline int v9fs_cache_register(void)
+{
+ return 1;
+}
+
+static inline void v9fs_cache_unregister(void) {}
+
+static inline int v9fs_fscache_release_page(struct page *page,
+ gfp_t gfp) {
+ return 1;
+}
+
+static inline void v9fs_fscache_invalidate_page(struct page *page) {}
+
+static inline int v9fs_readpage_from_fscache(struct inode *inode,
+ struct page *page)
+{
+ return -ENOBUFS;
+}
+
+static inline int v9fs_readpages_from_fscache(struct inode *inode,
+ struct address_space *mapping,
+ struct list_head *pages,
+ unsigned *nr_pages)
+{
+ return -ENOBUFS;
+}
+
+static inline void v9fs_readpage_to_fscache(struct inode *inode,
+ struct page *page)
+{}
+
+static inline void v9fs_uncache_page(struct inode *inode, struct page *page)
+{}
+
+static inline void v9fs_vcookie_set_qid(struct inode *inode,
+ struct p9_qid *qid)
+{}
+
+#endif /* CONFIG_9P_FSCACHE */
+#endif /* _9P_CACHE_H */
#include <net/9p/transport.h>
#include "v9fs.h"
#include "v9fs_vfs.h"
+#include "cache.h"
+
+static DEFINE_SPINLOCK(v9fs_sessionlist_lock);
+static LIST_HEAD(v9fs_sessionlist);
/*
- * Option Parsing (code inspired by NFS code)
- * NOTE: each transport will parse its own options
- */
+ * Option Parsing (code inspired by NFS code)
+ * NOTE: each transport will parse its own options
+ */
enum {
/* Options that take integer arguments */
Opt_debug, Opt_dfltuid, Opt_dfltgid, Opt_afid,
/* String options */
- Opt_uname, Opt_remotename, Opt_trans,
+ Opt_uname, Opt_remotename, Opt_trans, Opt_cache, Opt_cachetag,
/* Options that take no arguments */
Opt_nodevmap,
/* Cache options */
- Opt_cache_loose,
+ Opt_cache_loose, Opt_fscache,
/* Access options */
Opt_access,
/* Error token */
{Opt_uname, "uname=%s"},
{Opt_remotename, "aname=%s"},
{Opt_nodevmap, "nodevmap"},
- {Opt_cache_loose, "cache=loose"},
+ {Opt_cache, "cache=%s"},
{Opt_cache_loose, "loose"},
+ {Opt_fscache, "fscache"},
+ {Opt_cachetag, "cachetag=%s"},
{Opt_access, "access=%s"},
{Opt_err, NULL}
};
v9ses->afid = ~0;
v9ses->debug = 0;
v9ses->cache = 0;
+#ifdef CONFIG_9P_FSCACHE
+ v9ses->cachetag = NULL;
+#endif
if (!opts)
return 0;
options = kstrdup(opts, GFP_KERNEL);
- if (!options) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "failed to allocate copy of option string\n");
- return -ENOMEM;
- }
+ if (!options)
+ goto fail_option_alloc;
while ((p = strsep(&options, ",")) != NULL) {
int token;
case Opt_cache_loose:
v9ses->cache = CACHE_LOOSE;
break;
+ case Opt_fscache:
+ v9ses->cache = CACHE_FSCACHE;
+ break;
+ case Opt_cachetag:
+#ifdef CONFIG_9P_FSCACHE
+ v9ses->cachetag = match_strdup(&args[0]);
+#endif
+ break;
+ case Opt_cache:
+ s = match_strdup(&args[0]);
+ if (!s)
+ goto fail_option_alloc;
+
+ if (strcmp(s, "loose") == 0)
+ v9ses->cache = CACHE_LOOSE;
+ else if (strcmp(s, "fscache") == 0)
+ v9ses->cache = CACHE_FSCACHE;
+ else
+ v9ses->cache = CACHE_NONE;
+ kfree(s);
+ break;
case Opt_access:
s = match_strdup(&args[0]);
- if (!s) {
- P9_DPRINTK(P9_DEBUG_ERROR,
- "failed to allocate copy"
- " of option argument\n");
- ret = -ENOMEM;
- break;
- }
+ if (!s)
+ goto fail_option_alloc;
+
v9ses->flags &= ~V9FS_ACCESS_MASK;
if (strcmp(s, "user") == 0)
v9ses->flags |= V9FS_ACCESS_USER;
}
kfree(options);
return ret;
+
+fail_option_alloc:
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "failed to allocate copy of option argument\n");
+ return -ENOMEM;
}
/**
return ERR_PTR(-ENOMEM);
}
+ spin_lock(&v9fs_sessionlist_lock);
+ list_add(&v9ses->slist, &v9fs_sessionlist);
+ spin_unlock(&v9fs_sessionlist_lock);
+
v9ses->flags = V9FS_EXTENDED | V9FS_ACCESS_USER;
strcpy(v9ses->uname, V9FS_DEFUSER);
strcpy(v9ses->aname, V9FS_DEFANAME);
else
fid->uid = ~0;
+#ifdef CONFIG_9P_FSCACHE
+ /* register the session for caching */
+ v9fs_cache_session_get_cookie(v9ses);
+#endif
+
return fid;
error:
v9ses->clnt = NULL;
}
+#ifdef CONFIG_9P_FSCACHE
+ if (v9ses->fscache) {
+ v9fs_cache_session_put_cookie(v9ses);
+ kfree(v9ses->cachetag);
+ }
+#endif
__putname(v9ses->uname);
__putname(v9ses->aname);
+
+ spin_lock(&v9fs_sessionlist_lock);
+ list_del(&v9ses->slist);
+ spin_unlock(&v9fs_sessionlist_lock);
}
/**
extern int v9fs_error_init(void);
+static struct kobject *v9fs_kobj;
+
+#ifdef CONFIG_9P_FSCACHE
/**
- * v9fs_init - Initialize module
+ * caches_show - list caches associated with a session
+ *
+ * Returns the size of buffer written.
+ */
+
+static ssize_t caches_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ ssize_t n = 0, count = 0, limit = PAGE_SIZE;
+ struct v9fs_session_info *v9ses;
+
+ spin_lock(&v9fs_sessionlist_lock);
+ list_for_each_entry(v9ses, &v9fs_sessionlist, slist) {
+ if (v9ses->cachetag) {
+ n = snprintf(buf, limit, "%s\n", v9ses->cachetag);
+ if (n < 0) {
+ count = n;
+ break;
+ }
+
+ count += n;
+ limit -= n;
+ }
+ }
+
+ spin_unlock(&v9fs_sessionlist_lock);
+ return count;
+}
+
+static struct kobj_attribute v9fs_attr_cache = __ATTR_RO(caches);
+#endif /* CONFIG_9P_FSCACHE */
+
+static struct attribute *v9fs_attrs[] = {
+#ifdef CONFIG_9P_FSCACHE
+ &v9fs_attr_cache.attr,
+#endif
+ NULL,
+};
+
+static struct attribute_group v9fs_attr_group = {
+ .attrs = v9fs_attrs,
+};
+
+/**
+ * v9fs_sysfs_init - Initialize the v9fs sysfs interface
+ *
+ */
+
+static int v9fs_sysfs_init(void)
+{
+ v9fs_kobj = kobject_create_and_add("9p", fs_kobj);
+ if (!v9fs_kobj)
+ return -ENOMEM;
+
+ if (sysfs_create_group(v9fs_kobj, &v9fs_attr_group)) {
+ kobject_put(v9fs_kobj);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/**
+ * v9fs_sysfs_cleanup - Unregister the v9fs sysfs interface
+ *
+ */
+
+static void v9fs_sysfs_cleanup(void)
+{
+ sysfs_remove_group(v9fs_kobj, &v9fs_attr_group);
+ kobject_put(v9fs_kobj);
+}
+
+/**
+ * init_v9fs - Initialize module
*
*/
static int __init init_v9fs(void)
{
+ int err;
printk(KERN_INFO "Installing v9fs 9p2000 file system support\n");
/* TODO: Setup list of registered trasnport modules */
- return register_filesystem(&v9fs_fs_type);
+ err = register_filesystem(&v9fs_fs_type);
+ if (err < 0) {
+ printk(KERN_ERR "Failed to register filesystem\n");
+ return err;
+ }
+
+ err = v9fs_cache_register();
+ if (err < 0) {
+ printk(KERN_ERR "Failed to register v9fs for caching\n");
+ goto out_fs_unreg;
+ }
+
+ err = v9fs_sysfs_init();
+ if (err < 0) {
+ printk(KERN_ERR "Failed to register with sysfs\n");
+ goto out_sysfs_cleanup;
+ }
+
+ return 0;
+
+out_sysfs_cleanup:
+ v9fs_sysfs_cleanup();
+
+out_fs_unreg:
+ unregister_filesystem(&v9fs_fs_type);
+
+ return err;
}
/**
- * v9fs_init - shutdown module
+ * exit_v9fs - shutdown module
*
*/
static void __exit exit_v9fs(void)
{
+ v9fs_sysfs_cleanup();
+ v9fs_cache_unregister();
unregister_filesystem(&v9fs_fs_type);
}
enum p9_cache_modes {
CACHE_NONE,
CACHE_LOOSE,
+ CACHE_FSCACHE,
};
/**
* @debug: debug level
* @afid: authentication handle
* @cache: cache mode of type &p9_cache_modes
+ * @cachetag: the tag of the cache associated with this session
+ * @fscache: session cookie associated with FS-Cache
* @options: copy of options string given by user
* @uname: string user name to mount hierarchy as
* @aname: mount specifier for remote hierarchy
* @dfltgid: default numeric groupid to mount hierarchy as
* @uid: if %V9FS_ACCESS_SINGLE, the numeric uid which mounted the hierarchy
* @clnt: reference to 9P network client instantiated for this session
- * @debugfs_dir: reference to debugfs_dir which can be used for add'l debug
+ * @slist: reference to list of registered 9p sessions
*
* This structure holds state for each session instance established during
* a sys_mount() .
unsigned short debug;
unsigned int afid;
unsigned int cache;
+#ifdef CONFIG_9P_FSCACHE
+ char *cachetag;
+ struct fscache_cookie *fscache;
+#endif
char *uname; /* user name to mount as */
char *aname; /* name of remote hierarchy being mounted */
unsigned int dfltgid; /* default gid for legacy support */
u32 uid; /* if ACCESS_SINGLE, the uid that has access */
struct p9_client *clnt; /* 9p client */
- struct dentry *debugfs_dir;
+ struct list_head slist; /* list of sessions registered with v9fs */
};
-extern struct dentry *v9fs_debugfs_root;
-
struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *,
char *);
void v9fs_session_close(struct v9fs_session_info *v9ses);
extern const struct dentry_operations v9fs_dentry_operations;
extern const struct dentry_operations v9fs_cached_dentry_operations;
+#ifdef CONFIG_9P_FSCACHE
+struct inode *v9fs_alloc_inode(struct super_block *sb);
+void v9fs_destroy_inode(struct inode *inode);
+#endif
+
struct inode *v9fs_get_inode(struct super_block *sb, int mode);
+void v9fs_clear_inode(struct inode *inode);
ino_t v9fs_qid2ino(struct p9_qid *qid);
void v9fs_stat2inode(struct p9_wstat *, struct inode *, struct super_block *);
int v9fs_dir_release(struct inode *inode, struct file *filp);
#include "v9fs.h"
#include "v9fs_vfs.h"
+#include "cache.h"
/**
* v9fs_vfs_readpage - read an entire page in from 9P
int retval;
loff_t offset;
char *buffer;
+ struct inode *inode;
+ inode = page->mapping->host;
P9_DPRINTK(P9_DEBUG_VFS, "\n");
+
+ BUG_ON(!PageLocked(page));
+
+ retval = v9fs_readpage_from_fscache(inode, page);
+ if (retval == 0)
+ return retval;
+
buffer = kmap(page);
offset = page_offset(page);
retval = v9fs_file_readn(filp, buffer, NULL, PAGE_CACHE_SIZE, offset);
- if (retval < 0)
+ if (retval < 0) {
+ v9fs_uncache_page(inode, page);
goto done;
+ }
memset(buffer + retval, 0, PAGE_CACHE_SIZE - retval);
flush_dcache_page(page);
SetPageUptodate(page);
+
+ v9fs_readpage_to_fscache(inode, page);
retval = 0;
done:
return retval;
}
+/**
+ * v9fs_vfs_readpages - read a set of pages from 9P
+ *
+ * @filp: file being read
+ * @mapping: the address space
+ * @pages: list of pages to read
+ * @nr_pages: count of pages to read
+ *
+ */
+
+static int v9fs_vfs_readpages(struct file *filp, struct address_space *mapping,
+ struct list_head *pages, unsigned nr_pages)
+{
+ int ret = 0;
+ struct inode *inode;
+
+ inode = mapping->host;
+ P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p\n", inode, filp);
+
+ ret = v9fs_readpages_from_fscache(inode, mapping, pages, &nr_pages);
+ if (ret == 0)
+ return ret;
+
+ ret = read_cache_pages(mapping, pages, (void *)v9fs_vfs_readpage, filp);
+ P9_DPRINTK(P9_DEBUG_VFS, " = %d\n", ret);
+ return ret;
+}
+
+/**
+ * v9fs_release_page - release the private state associated with a page
+ *
+ * Returns 1 if the page can be released, false otherwise.
+ */
+
+static int v9fs_release_page(struct page *page, gfp_t gfp)
+{
+ if (PagePrivate(page))
+ return 0;
+
+ return v9fs_fscache_release_page(page, gfp);
+}
+
+/**
+ * v9fs_invalidate_page - Invalidate a page completely or partially
+ *
+ * @page: structure to page
+ * @offset: offset in the page
+ */
+
+static void v9fs_invalidate_page(struct page *page, unsigned long offset)
+{
+ if (offset == 0)
+ v9fs_fscache_invalidate_page(page);
+}
+
+/**
+ * v9fs_launder_page - Writeback a dirty page
+ * Since the writes go directly to the server, we simply return a 0
+ * here to indicate success.
+ *
+ * Returns 0 on success.
+ */
+
+static int v9fs_launder_page(struct page *page)
+{
+ return 0;
+}
+
const struct address_space_operations v9fs_addr_operations = {
.readpage = v9fs_vfs_readpage,
+ .readpages = v9fs_vfs_readpages,
+ .releasepage = v9fs_release_page,
+ .invalidatepage = v9fs_invalidate_page,
+ .launder_page = v9fs_launder_page,
};
#include "v9fs_vfs.h"
#include "fid.h"
+/**
+ * struct p9_rdir - readdir accounting
+ * @mutex: mutex protecting readdir
+ * @head: start offset of current dirread buffer
+ * @tail: end offset of current dirread buffer
+ * @buf: dirread buffer
+ *
+ * private structure for keeping track of readdir
+ * allocated on demand
+ */
+
+struct p9_rdir {
+ struct mutex mutex;
+ int head;
+ int tail;
+ uint8_t *buf;
+};
+
/**
* dt_type - return file type
* @mistat: mistat structure
{
int over;
struct p9_wstat st;
- int err;
+ int err = 0;
struct p9_fid *fid;
int buflen;
- char *statbuf;
- int n, i = 0;
+ int reclen = 0;
+ struct p9_rdir *rdir;
P9_DPRINTK(P9_DEBUG_VFS, "name %s\n", filp->f_path.dentry->d_name.name);
fid = filp->private_data;
buflen = fid->clnt->msize - P9_IOHDRSZ;
- statbuf = kmalloc(buflen, GFP_KERNEL);
- if (!statbuf)
- return -ENOMEM;
-
- while (1) {
- err = v9fs_file_readn(filp, statbuf, NULL, buflen,
- fid->rdir_fpos);
- if (err <= 0)
- break;
-
- n = err;
- while (i < n) {
- err = p9stat_read(statbuf + i, buflen-i, &st,
- fid->clnt->dotu);
+
+ /* allocate rdir on demand */
+ if (!fid->rdir) {
+ rdir = kmalloc(sizeof(struct p9_rdir) + buflen, GFP_KERNEL);
+
+ if (rdir == NULL) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ spin_lock(&filp->f_dentry->d_lock);
+ if (!fid->rdir) {
+ rdir->buf = (uint8_t *)rdir + sizeof(struct p9_rdir);
+ mutex_init(&rdir->mutex);
+ rdir->head = rdir->tail = 0;
+ fid->rdir = (void *) rdir;
+ rdir = NULL;
+ }
+ spin_unlock(&filp->f_dentry->d_lock);
+ kfree(rdir);
+ }
+ rdir = (struct p9_rdir *) fid->rdir;
+
+ err = mutex_lock_interruptible(&rdir->mutex);
+ while (err == 0) {
+ if (rdir->tail == rdir->head) {
+ err = v9fs_file_readn(filp, rdir->buf, NULL,
+ buflen, filp->f_pos);
+ if (err <= 0)
+ goto unlock_and_exit;
+
+ rdir->head = 0;
+ rdir->tail = err;
+ }
+
+ while (rdir->head < rdir->tail) {
+ err = p9stat_read(rdir->buf + rdir->head,
+ buflen - rdir->head, &st,
+ fid->clnt->dotu);
if (err) {
P9_DPRINTK(P9_DEBUG_VFS, "returned %d\n", err);
err = -EIO;
p9stat_free(&st);
- goto free_and_exit;
+ goto unlock_and_exit;
}
-
- i += st.size+2;
- fid->rdir_fpos += st.size+2;
+ reclen = st.size+2;
over = filldir(dirent, st.name, strlen(st.name),
filp->f_pos, v9fs_qid2ino(&st.qid), dt_type(&st));
- filp->f_pos += st.size+2;
-
p9stat_free(&st);
if (over) {
err = 0;
- goto free_and_exit;
+ goto unlock_and_exit;
}
+ rdir->head += reclen;
+ filp->f_pos += reclen;
}
}
-free_and_exit:
- kfree(statbuf);
+unlock_and_exit:
+ mutex_unlock(&rdir->mutex);
+exit:
return err;
}
#include <linux/string.h>
#include <linux/inet.h>
#include <linux/list.h>
+#include <linux/pagemap.h>
#include <asm/uaccess.h>
#include <linux/idr.h>
#include <net/9p/9p.h>
#include "v9fs.h"
#include "v9fs_vfs.h"
#include "fid.h"
+#include "cache.h"
static const struct file_operations v9fs_cached_file_operations;
return err;
}
if (omode & P9_OTRUNC) {
- inode->i_size = 0;
+ i_size_write(inode, 0);
inode->i_blocks = 0;
}
if ((file->f_flags & O_APPEND) && (!v9fs_extended(v9ses)))
/* enable cached file options */
if(file->f_op == &v9fs_file_operations)
file->f_op = &v9fs_cached_file_operations;
+
+#ifdef CONFIG_9P_FSCACHE
+ v9fs_cache_inode_set_cookie(inode, file);
+#endif
}
return 0;
struct p9_client *clnt;
struct inode *inode = filp->f_path.dentry->d_inode;
int origin = *offset;
+ unsigned long pg_start, pg_end;
P9_DPRINTK(P9_DEBUG_VFS, "data %p count %d offset %x\n", data,
(int)count, (int)*offset);
if (count < rsize)
rsize = count;
- n = p9_client_write(fid, NULL, data+total, *offset+total,
+ n = p9_client_write(fid, NULL, data+total, origin+total,
rsize);
if (n <= 0)
break;
} while (count > 0);
if (total > 0) {
- invalidate_inode_pages2_range(inode->i_mapping, origin,
- origin+total);
+ pg_start = origin >> PAGE_CACHE_SHIFT;
+ pg_end = (origin + total - 1) >> PAGE_CACHE_SHIFT;
+ if (inode->i_mapping && inode->i_mapping->nrpages)
+ invalidate_inode_pages2_range(inode->i_mapping,
+ pg_start, pg_end);
*offset += total;
- }
-
- if (*offset > inode->i_size) {
- inode->i_size = *offset;
- inode->i_blocks = (inode->i_size + 512 - 1) >> 9;
+ i_size_write(inode, i_size_read(inode) + total);
+ inode->i_blocks = (i_size_read(inode) + 512 - 1) >> 9;
}
if (n < 0)
#include "v9fs.h"
#include "v9fs_vfs.h"
#include "fid.h"
+#include "cache.h"
static const struct inode_operations v9fs_dir_inode_operations;
static const struct inode_operations v9fs_dir_inode_operations_ext;
wstat->extension = NULL;
}
+#ifdef CONFIG_9P_FSCACHE
+/**
+ * v9fs_alloc_inode - helper function to allocate an inode
+ * This callback is executed before setting up the inode so that we
+ * can associate a vcookie with each inode.
+ *
+ */
+
+struct inode *v9fs_alloc_inode(struct super_block *sb)
+{
+ struct v9fs_cookie *vcookie;
+ vcookie = (struct v9fs_cookie *)kmem_cache_alloc(vcookie_cache,
+ GFP_KERNEL);
+ if (!vcookie)
+ return NULL;
+
+ vcookie->fscache = NULL;
+ vcookie->qid = NULL;
+ spin_lock_init(&vcookie->lock);
+ return &vcookie->inode;
+}
+
+/**
+ * v9fs_destroy_inode - destroy an inode
+ *
+ */
+
+void v9fs_destroy_inode(struct inode *inode)
+{
+ kmem_cache_free(vcookie_cache, v9fs_inode2cookie(inode));
+}
+#endif
+
/**
* v9fs_get_inode - helper function to setup an inode
* @sb: superblock
}
*/
+
+/**
+ * v9fs_clear_inode - release an inode
+ * @inode: inode to release
+ *
+ */
+void v9fs_clear_inode(struct inode *inode)
+{
+ filemap_fdatawrite(inode->i_mapping);
+
+#ifdef CONFIG_9P_FSCACHE
+ v9fs_cache_inode_put_cookie(inode);
+#endif
+}
+
/**
* v9fs_inode_from_fid - populate an inode by issuing a attribute request
* @v9ses: session information
v9fs_stat2inode(st, ret, sb);
ret->i_ino = v9fs_qid2ino(&st->qid);
+
+#ifdef CONFIG_9P_FSCACHE
+ v9fs_vcookie_set_qid(ret, &st->qid);
+ v9fs_cache_inode_get_cookie(ret);
+#endif
p9stat_free(st);
kfree(st);
+
return ret;
error:
P9_DPRINTK(P9_DEBUG_VFS, "dentry: %p\n", dentry);
err = -EPERM;
v9ses = v9fs_inode2v9ses(dentry->d_inode);
- if (v9ses->cache == CACHE_LOOSE)
+ if (v9ses->cache == CACHE_LOOSE || v9ses->cache == CACHE_FSCACHE)
return simple_getattr(mnt, dentry, stat);
fid = v9fs_fid_lookup(dentry);
} else
inode->i_rdev = 0;
- inode->i_size = stat->length;
+ i_size_write(inode, stat->length);
/* not real number of blocks, but 512 byte ones ... */
- inode->i_blocks = (inode->i_size + 512 - 1) >> 9;
+ inode->i_blocks = (i_size_read(inode) + 512 - 1) >> 9;
}
/**
P9_DPRINTK(P9_DEBUG_VFS,
"%s -> %s (%s)\n", dentry->d_name.name, st->extension, buffer);
- retval = buflen;
-
+ retval = strnlen(buffer, buflen);
done:
kfree(st);
return retval;
__putname(link);
link = ERR_PTR(len);
} else
- link[len] = 0;
+ link[min(len, PATH_MAX-1)] = 0;
}
nd_set_link(nd, link);
#include "v9fs_vfs.h"
#include "fid.h"
-static void v9fs_clear_inode(struct inode *);
static const struct super_operations v9fs_super_ops;
-/**
- * v9fs_clear_inode - release an inode
- * @inode: inode to release
- *
- */
-
-static void v9fs_clear_inode(struct inode *inode)
-{
- filemap_fdatawrite(inode->i_mapping);
-}
-
/**
* v9fs_set_super - set the superblock
* @s: super block
}
static const struct super_operations v9fs_super_ops = {
+#ifdef CONFIG_9P_FSCACHE
+ .alloc_inode = v9fs_alloc_inode,
+ .destroy_inode = v9fs_destroy_inode,
+#endif
.statfs = simple_statfs,
.clear_inode = v9fs_clear_inode,
.show_options = generic_show_options,
config HUGETLBFS
bool "HugeTLB file system support"
- depends on X86 || IA64 || PPC64 || SPARC64 || (SUPERH && MMU) || \
- (S390 && 64BIT) || SYS_SUPPORTS_HUGETLBFS || BROKEN
+ depends on X86 || IA64 || SPARC64 || (S390 && 64BIT) || \
+ SYS_SUPPORTS_HUGETLBFS || BROKEN
help
hugetlbfs is a filesystem backing for HugeTLB pages, based on
ramfs. For architectures that support it, say Y here and read
adfs_get_block(struct inode *inode, sector_t block, struct buffer_head *bh,
int create)
{
- if (block < 0)
- goto abort_negative;
-
if (!create) {
if (block >= inode->i_blocks)
goto abort_toobig;
/* don't support allocation of blocks yet */
return -EIO;
-abort_negative:
- adfs_error(inode->i_sb, "block %d < 0", block);
- return -EIO;
-
abort_toobig:
return 0;
}
+++ /dev/null
-/* AFS local cache management interface
- *
- * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/fscache.h>
#include <linux/key.h>
#include <linux/workqueue.h>
#include <linux/sched.h>
+#include <linux/fscache.h>
#include "afs.h"
#include "afs_vl.h"
-#include "cache.h"
#define AFS_CELL_MAX_ADDRS 15
*
*/
+#include <linux/cred.h>
#include <linux/file.h>
#include <linux/poll.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/fs.h>
/* Taken over from the old code... */
/* POSIX UID/GID verification for setting inode attributes. */
-int inode_change_ok(struct inode *inode, struct iattr *attr)
+int inode_change_ok(const struct inode *inode, struct iattr *attr)
{
int retval = -EPERM;
unsigned int ia_valid = attr->ia_valid;
error:
return retval;
}
-
EXPORT_SYMBOL(inode_change_ok);
+/**
+ * inode_newsize_ok - may this inode be truncated to a given size
+ * @inode: the inode to be truncated
+ * @offset: the new size to assign to the inode
+ * @Returns: 0 on success, -ve errno on failure
+ *
+ * inode_newsize_ok will check filesystem limits and ulimits to check that the
+ * new inode size is within limits. inode_newsize_ok will also send SIGXFSZ
+ * when necessary. Caller must not proceed with inode size change if failure is
+ * returned. @inode must be a file (not directory), with appropriate
+ * permissions to allow truncate (inode_newsize_ok does NOT check these
+ * conditions).
+ *
+ * inode_newsize_ok must be called with i_mutex held.
+ */
+int inode_newsize_ok(const struct inode *inode, loff_t offset)
+{
+ if (inode->i_size < offset) {
+ unsigned long limit;
+
+ limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
+ if (limit != RLIM_INFINITY && offset > limit)
+ goto out_sig;
+ if (offset > inode->i_sb->s_maxbytes)
+ goto out_big;
+ } else {
+ /*
+ * truncation of in-use swapfiles is disallowed - it would
+ * cause subsequent swapout to scribble on the now-freed
+ * blocks.
+ */
+ if (IS_SWAPFILE(inode))
+ return -ETXTBSY;
+ }
+
+ return 0;
+out_sig:
+ send_sig(SIGXFSZ, current, 0);
+out_big:
+ return -EFBIG;
+}
+EXPORT_SYMBOL(inode_newsize_ok);
+
int inode_setattr(struct inode * inode, struct iattr * attr)
{
unsigned int ia_valid = attr->ia_valid;
{
kfree(BEFS_SB(sb)->mount_opts.iocharset);
BEFS_SB(sb)->mount_opts.iocharset = NULL;
-
- if (BEFS_SB(sb)->nls) {
- unload_nls(BEFS_SB(sb)->nls);
- BEFS_SB(sb)->nls = NULL;
- }
-
+ unload_nls(BEFS_SB(sb)->nls);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
}
int numnote;
};
-static int fill_note_info(struct elfhdr *elf, int phdrs,
- struct elf_note_info *info,
- long signr, struct pt_regs *regs)
+static int elf_note_info_init(struct elf_note_info *info)
{
-#define NUM_NOTES 6
- struct list_head *t;
-
- info->notes = NULL;
- info->prstatus = NULL;
- info->psinfo = NULL;
- info->fpu = NULL;
-#ifdef ELF_CORE_COPY_XFPREGS
- info->xfpu = NULL;
-#endif
+ memset(info, 0, sizeof(*info));
INIT_LIST_HEAD(&info->thread_list);
- info->notes = kmalloc(NUM_NOTES * sizeof(struct memelfnote),
- GFP_KERNEL);
+ /* Allocate space for six ELF notes */
+ info->notes = kmalloc(6 * sizeof(struct memelfnote), GFP_KERNEL);
if (!info->notes)
return 0;
info->psinfo = kmalloc(sizeof(*info->psinfo), GFP_KERNEL);
if (!info->psinfo)
- return 0;
+ goto notes_free;
info->prstatus = kmalloc(sizeof(*info->prstatus), GFP_KERNEL);
if (!info->prstatus)
- return 0;
+ goto psinfo_free;
info->fpu = kmalloc(sizeof(*info->fpu), GFP_KERNEL);
if (!info->fpu)
- return 0;
+ goto prstatus_free;
#ifdef ELF_CORE_COPY_XFPREGS
info->xfpu = kmalloc(sizeof(*info->xfpu), GFP_KERNEL);
if (!info->xfpu)
- return 0;
+ goto fpu_free;
+#endif
+ return 1;
+#ifdef ELF_CORE_COPY_XFPREGS
+ fpu_free:
+ kfree(info->fpu);
#endif
+ prstatus_free:
+ kfree(info->prstatus);
+ psinfo_free:
+ kfree(info->psinfo);
+ notes_free:
+ kfree(info->notes);
+ return 0;
+}
+
+static int fill_note_info(struct elfhdr *elf, int phdrs,
+ struct elf_note_info *info,
+ long signr, struct pt_regs *regs)
+{
+ struct list_head *t;
+
+ if (!elf_note_info_init(info))
+ return 0;
- info->thread_status_size = 0;
if (signr) {
struct core_thread *ct;
struct elf_thread_status *ets;
#endif
return 1;
-
-#undef NUM_NOTES
}
static size_t get_note_info_size(struct elf_note_info *info)
}
stack_size = exec_params.stack_size;
- if (stack_size < interp_params.stack_size)
- stack_size = interp_params.stack_size;
-
if (exec_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
executable_stack = EXSTACK_ENABLE_X;
else if (exec_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
executable_stack = EXSTACK_DISABLE_X;
- else if (interp_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
- executable_stack = EXSTACK_ENABLE_X;
- else if (interp_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
- executable_stack = EXSTACK_DISABLE_X;
else
executable_stack = EXSTACK_DEFAULT;
+ if (stack_size == 0) {
+ stack_size = interp_params.stack_size;
+ if (interp_params.flags & ELF_FDPIC_FLAG_EXEC_STACK)
+ executable_stack = EXSTACK_ENABLE_X;
+ else if (interp_params.flags & ELF_FDPIC_FLAG_NOEXEC_STACK)
+ executable_stack = EXSTACK_DISABLE_X;
+ else
+ executable_stack = EXSTACK_DEFAULT;
+ }
+
retval = -ENOEXEC;
if (stack_size == 0)
goto error;
ret = bprm->file->f_op->read(bprm->file, buf, LBUFSIZE, &fpos);
if (ret <= 0)
break;
- if (ret >= (unsigned long) -4096)
- break;
len -= ret;
strm.next_in = buf;
"(%d != %d)", (unsigned) r, curid, id);
goto failed;
} else if ( ! p->lib_list[id].loaded &&
- load_flat_shared_library(id, p) > (unsigned long) -4096) {
+ IS_ERR_VALUE(load_flat_shared_library(id, p))) {
printk("BINFMT_FLAT: failed to load library %d", id);
goto failed;
}
textpos = do_mmap(bprm->file, 0, text_len, PROT_READ|PROT_EXEC,
MAP_PRIVATE|MAP_EXECUTABLE, 0);
up_write(¤t->mm->mmap_sem);
- if (!textpos || textpos >= (unsigned long) -4096) {
+ if (!textpos || IS_ERR_VALUE(textpos)) {
if (!textpos)
textpos = (unsigned long) -ENOMEM;
printk("Unable to mmap process text, errno %d\n", (int)-textpos);
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
- if (realdatastart == 0 || realdatastart >= (unsigned long)-4096) {
+ if (realdatastart == 0 || IS_ERR_VALUE(realdatastart)) {
if (!realdatastart)
realdatastart = (unsigned long) -ENOMEM;
printk("Unable to allocate RAM for process data, errno %d\n",
result = bprm->file->f_op->read(bprm->file, (char *) datapos,
data_len + (relocs * sizeof(unsigned long)), &fpos);
}
- if (result >= (unsigned long)-4096) {
+ if (IS_ERR_VALUE(result)) {
printk("Unable to read data+bss, errno %d\n", (int)-result);
do_munmap(current->mm, textpos, text_len);
do_munmap(current->mm, realdatastart, data_len + extra);
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
up_write(¤t->mm->mmap_sem);
- if (!textpos || textpos >= (unsigned long) -4096) {
+ if (!textpos || IS_ERR_VALUE(textpos)) {
if (!textpos)
textpos = (unsigned long) -ENOMEM;
printk("Unable to allocate RAM for process text/data, errno %d\n",
fpos = 0;
result = bprm->file->f_op->read(bprm->file,
(char *) textpos, text_len, &fpos);
- if (result < (unsigned long) -4096)
+ if (!IS_ERR_VALUE(result))
result = decompress_exec(bprm, text_len, (char *) datapos,
data_len + (relocs * sizeof(unsigned long)), 0);
}
fpos = 0;
result = bprm->file->f_op->read(bprm->file,
(char *) textpos, text_len, &fpos);
- if (result < (unsigned long) -4096) {
+ if (!IS_ERR_VALUE(result)) {
fpos = ntohl(hdr->data_start);
result = bprm->file->f_op->read(bprm->file, (char *) datapos,
data_len + (relocs * sizeof(unsigned long)), &fpos);
}
}
- if (result >= (unsigned long)-4096) {
+ if (IS_ERR_VALUE(result)) {
printk("Unable to read code+data+bss, errno %d\n",(int)-result);
do_munmap(current->mm, textpos, text_len + data_len + extra +
MAX_SHARED_LIBS * sizeof(unsigned long));
res = prepare_binprm(&bprm);
- if (res <= (unsigned long)-4096)
+ if (!IS_ERR_VALUE(res))
res = load_flat_file(&bprm, libs, id, NULL);
abort_creds(bprm.cred);
stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */
res = load_flat_file(bprm, &libinfo, 0, &stack_len);
- if (res > (unsigned long)-4096)
+ if (IS_ERR_VALUE(res))
return res;
/* Update data segment pointers for all libraries */
mempool_free(p, bs->bio_pool);
}
+EXPORT_SYMBOL(bio_free);
void bio_init(struct bio *bio)
{
bio->bi_comp_cpu = -1;
atomic_set(&bio->bi_cnt, 1);
}
+EXPORT_SYMBOL(bio_init);
/**
* bio_alloc_bioset - allocate a bio for I/O
mempool_free(p, bs->bio_pool);
return NULL;
}
+EXPORT_SYMBOL(bio_alloc_bioset);
static void bio_fs_destructor(struct bio *bio)
{
* @gfp_mask: allocation mask to use
* @nr_iovecs: number of iovecs
*
- * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask
- * contains __GFP_WAIT, the allocation is guaranteed to succeed.
+ * bio_alloc will allocate a bio and associated bio_vec array that can hold
+ * at least @nr_iovecs entries. Allocations will be done from the
+ * fs_bio_set. Also see @bio_alloc_bioset and @bio_kmalloc.
+ *
+ * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
+ * a bio. This is due to the mempool guarantees. To make this work, callers
+ * must never allocate more than 1 bio at a time from this pool. Callers
+ * that need to allocate more than 1 bio must always submit the previously
+ * allocated bio for IO before attempting to allocate a new one. Failure to
+ * do so can cause livelocks under memory pressure.
*
* RETURNS:
* Pointer to new bio on success, NULL on failure.
return bio;
}
+EXPORT_SYMBOL(bio_alloc);
static void bio_kmalloc_destructor(struct bio *bio)
{
}
/**
- * bio_alloc - allocate a bio for I/O
+ * bio_kmalloc - allocate a bio for I/O using kmalloc()
* @gfp_mask: the GFP_ mask given to the slab allocator
* @nr_iovecs: number of iovecs to pre-allocate
*
* Description:
- * bio_alloc will allocate a bio and associated bio_vec array that can hold
- * at least @nr_iovecs entries. Allocations will be done from the
- * fs_bio_set. Also see @bio_alloc_bioset.
- *
- * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
- * a bio. This is due to the mempool guarantees. To make this work, callers
- * must never allocate more than 1 bio at a time from this pool. Callers
- * that need to allocate more than 1 bio must always submit the previously
- * allocated bio for IO before attempting to allocate a new one. Failure to
- * do so can cause livelocks under memory pressure.
+ * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask contains
+ * %__GFP_WAIT, the allocation is guaranteed to succeed.
*
**/
struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
return bio;
}
+EXPORT_SYMBOL(bio_kmalloc);
void zero_fill_bio(struct bio *bio)
{
*
* Description:
* Put a reference to a &struct bio, either one you have gotten with
- * bio_alloc or bio_get. The last put of a bio will free it.
+ * bio_alloc, bio_get or bio_clone. The last put of a bio will free it.
**/
void bio_put(struct bio *bio)
{
bio->bi_destructor(bio);
}
}
+EXPORT_SYMBOL(bio_put);
inline int bio_phys_segments(struct request_queue *q, struct bio *bio)
{
return bio->bi_phys_segments;
}
+EXPORT_SYMBOL(bio_phys_segments);
/**
* __bio_clone - clone a bio
bio->bi_size = bio_src->bi_size;
bio->bi_idx = bio_src->bi_idx;
}
+EXPORT_SYMBOL(__bio_clone);
/**
* bio_clone - clone a bio
return b;
}
+EXPORT_SYMBOL(bio_clone);
/**
* bio_get_nr_vecs - return approx number of vecs
return nr_pages;
}
+EXPORT_SYMBOL(bio_get_nr_vecs);
static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
*page, unsigned int len, unsigned int offset,
return __bio_add_page(q, bio, page, len, offset,
queue_max_hw_sectors(q));
}
+EXPORT_SYMBOL(bio_add_pc_page);
/**
* bio_add_page - attempt to add page to bio
struct request_queue *q = bdev_get_queue(bio->bi_bdev);
return __bio_add_page(q, bio, page, len, offset, queue_max_sectors(q));
}
+EXPORT_SYMBOL(bio_add_page);
struct bio_map_data {
struct bio_vec *iovecs;
bio_put(bio);
return ret;
}
+EXPORT_SYMBOL(bio_uncopy_user);
/**
* bio_copy_user_iov - copy user data to bio
return bio_copy_user_iov(q, map_data, &iov, 1, write_to_vm, gfp_mask);
}
+EXPORT_SYMBOL(bio_copy_user);
static struct bio *__bio_map_user_iov(struct request_queue *q,
struct block_device *bdev,
return bio_map_user_iov(q, bdev, &iov, 1, write_to_vm, gfp_mask);
}
+EXPORT_SYMBOL(bio_map_user);
/**
* bio_map_user_iov - map user sg_iovec table into bio
__bio_unmap_user(bio);
bio_put(bio);
}
+EXPORT_SYMBOL(bio_unmap_user);
static void bio_map_kern_endio(struct bio *bio, int err)
{
bio_put(bio);
}
-
static struct bio *__bio_map_kern(struct request_queue *q, void *data,
unsigned int len, gfp_t gfp_mask)
{
bio_put(bio);
return ERR_PTR(-EINVAL);
}
+EXPORT_SYMBOL(bio_map_kern);
static void bio_copy_kern_endio(struct bio *bio, int err)
{
return bio;
}
+EXPORT_SYMBOL(bio_copy_kern);
/*
* bio_set_pages_dirty() and bio_check_pages_dirty() are support functions
if (bio->bi_end_io)
bio->bi_end_io(bio, error);
}
+EXPORT_SYMBOL(bio_endio);
void bio_pair_release(struct bio_pair *bp)
{
mempool_free(bp, bp->bio2.bi_private);
}
}
+EXPORT_SYMBOL(bio_pair_release);
static void bio_pair_end_1(struct bio *bi, int err)
{
return bp;
}
+EXPORT_SYMBOL(bio_split);
/**
* bio_sector_offset - Find hardware sector offset in bio
kfree(bs);
}
+EXPORT_SYMBOL(bioset_free);
/**
* bioset_create - Create a bio_set
bioset_free(bs);
return NULL;
}
+EXPORT_SYMBOL(bioset_create);
static void __init biovec_init_slabs(void)
{
return 0;
}
-
subsys_initcall(init_bio);
-
-EXPORT_SYMBOL(bio_alloc);
-EXPORT_SYMBOL(bio_kmalloc);
-EXPORT_SYMBOL(bio_put);
-EXPORT_SYMBOL(bio_free);
-EXPORT_SYMBOL(bio_endio);
-EXPORT_SYMBOL(bio_init);
-EXPORT_SYMBOL(__bio_clone);
-EXPORT_SYMBOL(bio_clone);
-EXPORT_SYMBOL(bio_phys_segments);
-EXPORT_SYMBOL(bio_add_page);
-EXPORT_SYMBOL(bio_add_pc_page);
-EXPORT_SYMBOL(bio_get_nr_vecs);
-EXPORT_SYMBOL(bio_map_user);
-EXPORT_SYMBOL(bio_unmap_user);
-EXPORT_SYMBOL(bio_map_kern);
-EXPORT_SYMBOL(bio_copy_kern);
-EXPORT_SYMBOL(bio_pair_release);
-EXPORT_SYMBOL(bio_split);
-EXPORT_SYMBOL(bio_copy_user);
-EXPORT_SYMBOL(bio_uncopy_user);
-EXPORT_SYMBOL(bioset_create);
-EXPORT_SYMBOL(bioset_free);
-EXPORT_SYMBOL(bio_alloc_bioset);
* freeze_bdev -- lock a filesystem and force it into a consistent state
* @bdev: blockdevice to lock
*
- * This takes the block device bd_mount_sem to make sure no new mounts
- * happen on bdev until thaw_bdev() is called.
* If a superblock is found on this device, we take the s_umount semaphore
* on it to make sure nobody unmounts until the snapshot creation is done.
* The reference counter (bd_fsfreeze_count) guarantees that only the last
int error = 0;
mutex_lock(&bdev->bd_fsfreeze_mutex);
- if (bdev->bd_fsfreeze_count > 0) {
- bdev->bd_fsfreeze_count++;
+ if (++bdev->bd_fsfreeze_count > 1) {
+ /*
+ * We don't even need to grab a reference - the first call
+ * to freeze_bdev grab an active reference and only the last
+ * thaw_bdev drops it.
+ */
sb = get_super(bdev);
+ drop_super(sb);
mutex_unlock(&bdev->bd_fsfreeze_mutex);
return sb;
}
- bdev->bd_fsfreeze_count++;
-
- down(&bdev->bd_mount_sem);
- sb = get_super(bdev);
- if (sb && !(sb->s_flags & MS_RDONLY)) {
- sb->s_frozen = SB_FREEZE_WRITE;
- smp_wmb();
-
- sync_filesystem(sb);
-
- sb->s_frozen = SB_FREEZE_TRANS;
- smp_wmb();
-
- sync_blockdev(sb->s_bdev);
-
- if (sb->s_op->freeze_fs) {
- error = sb->s_op->freeze_fs(sb);
- if (error) {
- printk(KERN_ERR
- "VFS:Filesystem freeze failed\n");
- sb->s_frozen = SB_UNFROZEN;
- drop_super(sb);
- up(&bdev->bd_mount_sem);
- bdev->bd_fsfreeze_count--;
- mutex_unlock(&bdev->bd_fsfreeze_mutex);
- return ERR_PTR(error);
- }
+
+ sb = get_active_super(bdev);
+ if (!sb)
+ goto out;
+ if (sb->s_flags & MS_RDONLY) {
+ deactivate_locked_super(sb);
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
+ return sb;
+ }
+
+ sb->s_frozen = SB_FREEZE_WRITE;
+ smp_wmb();
+
+ sync_filesystem(sb);
+
+ sb->s_frozen = SB_FREEZE_TRANS;
+ smp_wmb();
+
+ sync_blockdev(sb->s_bdev);
+
+ if (sb->s_op->freeze_fs) {
+ error = sb->s_op->freeze_fs(sb);
+ if (error) {
+ printk(KERN_ERR
+ "VFS:Filesystem freeze failed\n");
+ sb->s_frozen = SB_UNFROZEN;
+ deactivate_locked_super(sb);
+ bdev->bd_fsfreeze_count--;
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
+ return ERR_PTR(error);
}
}
+ up_write(&sb->s_umount);
+ out:
sync_blockdev(bdev);
mutex_unlock(&bdev->bd_fsfreeze_mutex);
-
- return sb; /* thaw_bdev releases s->s_umount and bd_mount_sem */
+ return sb; /* thaw_bdev releases s->s_umount */
}
EXPORT_SYMBOL(freeze_bdev);
*/
int thaw_bdev(struct block_device *bdev, struct super_block *sb)
{
- int error = 0;
+ int error = -EINVAL;
mutex_lock(&bdev->bd_fsfreeze_mutex);
- if (!bdev->bd_fsfreeze_count) {
- mutex_unlock(&bdev->bd_fsfreeze_mutex);
- return -EINVAL;
- }
-
- bdev->bd_fsfreeze_count--;
- if (bdev->bd_fsfreeze_count > 0) {
- if (sb)
- drop_super(sb);
- mutex_unlock(&bdev->bd_fsfreeze_mutex);
- return 0;
- }
-
- if (sb) {
- BUG_ON(sb->s_bdev != bdev);
- if (!(sb->s_flags & MS_RDONLY)) {
- if (sb->s_op->unfreeze_fs) {
- error = sb->s_op->unfreeze_fs(sb);
- if (error) {
- printk(KERN_ERR
- "VFS:Filesystem thaw failed\n");
- sb->s_frozen = SB_FREEZE_TRANS;
- bdev->bd_fsfreeze_count++;
- mutex_unlock(&bdev->bd_fsfreeze_mutex);
- return error;
- }
- }
- sb->s_frozen = SB_UNFROZEN;
- smp_wmb();
- wake_up(&sb->s_wait_unfrozen);
+ if (!bdev->bd_fsfreeze_count)
+ goto out_unlock;
+
+ error = 0;
+ if (--bdev->bd_fsfreeze_count > 0)
+ goto out_unlock;
+
+ if (!sb)
+ goto out_unlock;
+
+ BUG_ON(sb->s_bdev != bdev);
+ down_write(&sb->s_umount);
+ if (sb->s_flags & MS_RDONLY)
+ goto out_deactivate;
+
+ if (sb->s_op->unfreeze_fs) {
+ error = sb->s_op->unfreeze_fs(sb);
+ if (error) {
+ printk(KERN_ERR
+ "VFS:Filesystem thaw failed\n");
+ sb->s_frozen = SB_FREEZE_TRANS;
+ bdev->bd_fsfreeze_count++;
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
+ return error;
}
- drop_super(sb);
}
- up(&bdev->bd_mount_sem);
+ sb->s_frozen = SB_UNFROZEN;
+ smp_wmb();
+ wake_up(&sb->s_wait_unfrozen);
+
+out_deactivate:
+ if (sb)
+ deactivate_locked_super(sb);
+out_unlock:
mutex_unlock(&bdev->bd_fsfreeze_mutex);
return 0;
}
memset(bdev, 0, sizeof(*bdev));
mutex_init(&bdev->bd_mutex);
- sema_init(&bdev->bd_mount_sem, 1);
INIT_LIST_HEAD(&bdev->bd_inodes);
INIT_LIST_HEAD(&bdev->bd_list);
#ifdef CONFIG_SYSFS
bd_set_size(bdev, (loff_t)bdev->bd_part->nr_sects << 9);
}
} else {
- put_disk(disk);
module_put(disk->fops->owner);
+ put_disk(disk);
disk = NULL;
if (bdev->bd_contains == bdev) {
if (bdev->bd_disk->fops->open) {
#include "btrfs_inode.h"
#include "xattr.h"
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_FS_POSIX_ACL
static struct posix_acl *btrfs_get_acl(struct inode *inode, int type)
{
.set = btrfs_xattr_acl_access_set,
};
-#else /* CONFIG_FS_POSIX_ACL */
+#else /* CONFIG_BTRFS_FS_POSIX_ACL */
int btrfs_acl_chmod(struct inode *inode)
{
return 0;
}
-#endif /* CONFIG_FS_POSIX_ACL */
+#endif /* CONFIG_BTRFS_FS_POSIX_ACL */
/* number of things on the pending list */
atomic_t num_pending;
+ /* reference counter for this struct */
+ atomic_t refs;
+
unsigned long sequence;
/* protects the pending list. */
int idle;
};
+/*
+ * btrfs_start_workers uses kthread_run, which can block waiting for memory
+ * for a very long time. It will actually throttle on page writeback,
+ * and so it may not make progress until after our btrfs worker threads
+ * process all of the pending work structs in their queue
+ *
+ * This means we can't use btrfs_start_workers from inside a btrfs worker
+ * thread that is used as part of cleaning dirty memory, which pretty much
+ * involves all of the worker threads.
+ *
+ * Instead we have a helper queue who never has more than one thread
+ * where we scheduler thread start operations. This worker_start struct
+ * is used to contain the work and hold a pointer to the queue that needs
+ * another worker.
+ */
+struct worker_start {
+ struct btrfs_work work;
+ struct btrfs_workers *queue;
+};
+
+static void start_new_worker_func(struct btrfs_work *work)
+{
+ struct worker_start *start;
+ start = container_of(work, struct worker_start, work);
+ btrfs_start_workers(start->queue, 1);
+ kfree(start);
+}
+
+static int start_new_worker(struct btrfs_workers *queue)
+{
+ struct worker_start *start;
+ int ret;
+
+ start = kzalloc(sizeof(*start), GFP_NOFS);
+ if (!start)
+ return -ENOMEM;
+
+ start->work.func = start_new_worker_func;
+ start->queue = queue;
+ ret = btrfs_queue_worker(queue->atomic_worker_start, &start->work);
+ if (ret)
+ kfree(start);
+ return ret;
+}
+
/*
* helper function to move a thread onto the idle list after it
* has finished some requests.
unsigned long flags;
spin_lock_irqsave(&worker->workers->lock, flags);
worker->idle = 1;
- list_move(&worker->worker_list, &worker->workers->idle_list);
+
+ /* the list may be empty if the worker is just starting */
+ if (!list_empty(&worker->worker_list)) {
+ list_move(&worker->worker_list,
+ &worker->workers->idle_list);
+ }
spin_unlock_irqrestore(&worker->workers->lock, flags);
}
}
unsigned long flags;
spin_lock_irqsave(&worker->workers->lock, flags);
worker->idle = 0;
- list_move_tail(&worker->worker_list,
- &worker->workers->worker_list);
+
+ if (!list_empty(&worker->worker_list)) {
+ list_move_tail(&worker->worker_list,
+ &worker->workers->worker_list);
+ }
spin_unlock_irqrestore(&worker->workers->lock, flags);
}
}
-static noinline int run_ordered_completions(struct btrfs_workers *workers,
- struct btrfs_work *work)
+static void check_pending_worker_creates(struct btrfs_worker_thread *worker)
{
+ struct btrfs_workers *workers = worker->workers;
unsigned long flags;
+ rmb();
+ if (!workers->atomic_start_pending)
+ return;
+
+ spin_lock_irqsave(&workers->lock, flags);
+ if (!workers->atomic_start_pending)
+ goto out;
+
+ workers->atomic_start_pending = 0;
+ if (workers->num_workers + workers->num_workers_starting >=
+ workers->max_workers)
+ goto out;
+
+ workers->num_workers_starting += 1;
+ spin_unlock_irqrestore(&workers->lock, flags);
+ start_new_worker(workers);
+ return;
+
+out:
+ spin_unlock_irqrestore(&workers->lock, flags);
+}
+
+static noinline int run_ordered_completions(struct btrfs_workers *workers,
+ struct btrfs_work *work)
+{
if (!workers->ordered)
return 0;
set_bit(WORK_DONE_BIT, &work->flags);
- spin_lock_irqsave(&workers->lock, flags);
+ spin_lock(&workers->order_lock);
while (1) {
if (!list_empty(&workers->prio_order_list)) {
if (test_and_set_bit(WORK_ORDER_DONE_BIT, &work->flags))
break;
- spin_unlock_irqrestore(&workers->lock, flags);
+ spin_unlock(&workers->order_lock);
work->ordered_func(work);
/* now take the lock again and call the freeing code */
- spin_lock_irqsave(&workers->lock, flags);
+ spin_lock(&workers->order_lock);
list_del(&work->order_list);
work->ordered_free(work);
}
- spin_unlock_irqrestore(&workers->lock, flags);
+ spin_unlock(&workers->order_lock);
return 0;
}
+static void put_worker(struct btrfs_worker_thread *worker)
+{
+ if (atomic_dec_and_test(&worker->refs))
+ kfree(worker);
+}
+
+static int try_worker_shutdown(struct btrfs_worker_thread *worker)
+{
+ int freeit = 0;
+
+ spin_lock_irq(&worker->lock);
+ spin_lock(&worker->workers->lock);
+ if (worker->workers->num_workers > 1 &&
+ worker->idle &&
+ !worker->working &&
+ !list_empty(&worker->worker_list) &&
+ list_empty(&worker->prio_pending) &&
+ list_empty(&worker->pending) &&
+ atomic_read(&worker->num_pending) == 0) {
+ freeit = 1;
+ list_del_init(&worker->worker_list);
+ worker->workers->num_workers--;
+ }
+ spin_unlock(&worker->workers->lock);
+ spin_unlock_irq(&worker->lock);
+
+ if (freeit)
+ put_worker(worker);
+ return freeit;
+}
+
+static struct btrfs_work *get_next_work(struct btrfs_worker_thread *worker,
+ struct list_head *prio_head,
+ struct list_head *head)
+{
+ struct btrfs_work *work = NULL;
+ struct list_head *cur = NULL;
+
+ if(!list_empty(prio_head))
+ cur = prio_head->next;
+
+ smp_mb();
+ if (!list_empty(&worker->prio_pending))
+ goto refill;
+
+ if (!list_empty(head))
+ cur = head->next;
+
+ if (cur)
+ goto out;
+
+refill:
+ spin_lock_irq(&worker->lock);
+ list_splice_tail_init(&worker->prio_pending, prio_head);
+ list_splice_tail_init(&worker->pending, head);
+
+ if (!list_empty(prio_head))
+ cur = prio_head->next;
+ else if (!list_empty(head))
+ cur = head->next;
+ spin_unlock_irq(&worker->lock);
+
+ if (!cur)
+ goto out_fail;
+
+out:
+ work = list_entry(cur, struct btrfs_work, list);
+
+out_fail:
+ return work;
+}
+
/*
* main loop for servicing work items
*/
static int worker_loop(void *arg)
{
struct btrfs_worker_thread *worker = arg;
- struct list_head *cur;
+ struct list_head head;
+ struct list_head prio_head;
struct btrfs_work *work;
+
+ INIT_LIST_HEAD(&head);
+ INIT_LIST_HEAD(&prio_head);
+
do {
- spin_lock_irq(&worker->lock);
-again_locked:
+again:
while (1) {
- if (!list_empty(&worker->prio_pending))
- cur = worker->prio_pending.next;
- else if (!list_empty(&worker->pending))
- cur = worker->pending.next;
- else
+
+
+ work = get_next_work(worker, &prio_head, &head);
+ if (!work)
break;
- work = list_entry(cur, struct btrfs_work, list);
list_del(&work->list);
clear_bit(WORK_QUEUED_BIT, &work->flags);
work->worker = worker;
- spin_unlock_irq(&worker->lock);
work->func(work);
*/
run_ordered_completions(worker->workers, work);
- spin_lock_irq(&worker->lock);
- check_idle_worker(worker);
+ check_pending_worker_creates(worker);
+
}
+
+ spin_lock_irq(&worker->lock);
+ check_idle_worker(worker);
+
if (freezing(current)) {
worker->working = 0;
spin_unlock_irq(&worker->lock);
spin_lock_irq(&worker->lock);
set_current_state(TASK_INTERRUPTIBLE);
if (!list_empty(&worker->pending) ||
- !list_empty(&worker->prio_pending))
- goto again_locked;
+ !list_empty(&worker->prio_pending)) {
+ spin_unlock_irq(&worker->lock);
+ goto again;
+ }
/*
* this makes sure we get a wakeup when someone
worker->working = 0;
spin_unlock_irq(&worker->lock);
- if (!kthread_should_stop())
- schedule();
+ if (!kthread_should_stop()) {
+ schedule_timeout(HZ * 120);
+ if (!worker->working &&
+ try_worker_shutdown(worker)) {
+ return 0;
+ }
+ }
}
__set_current_state(TASK_RUNNING);
}
{
struct list_head *cur;
struct btrfs_worker_thread *worker;
+ int can_stop;
+ spin_lock_irq(&workers->lock);
list_splice_init(&workers->idle_list, &workers->worker_list);
while (!list_empty(&workers->worker_list)) {
cur = workers->worker_list.next;
worker = list_entry(cur, struct btrfs_worker_thread,
worker_list);
- kthread_stop(worker->task);
- list_del(&worker->worker_list);
- kfree(worker);
+
+ atomic_inc(&worker->refs);
+ workers->num_workers -= 1;
+ if (!list_empty(&worker->worker_list)) {
+ list_del_init(&worker->worker_list);
+ put_worker(worker);
+ can_stop = 1;
+ } else
+ can_stop = 0;
+ spin_unlock_irq(&workers->lock);
+ if (can_stop)
+ kthread_stop(worker->task);
+ spin_lock_irq(&workers->lock);
+ put_worker(worker);
}
+ spin_unlock_irq(&workers->lock);
return 0;
}
/*
* simple init on struct btrfs_workers
*/
-void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max)
+void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max,
+ struct btrfs_workers *async_helper)
{
workers->num_workers = 0;
+ workers->num_workers_starting = 0;
INIT_LIST_HEAD(&workers->worker_list);
INIT_LIST_HEAD(&workers->idle_list);
INIT_LIST_HEAD(&workers->order_list);
INIT_LIST_HEAD(&workers->prio_order_list);
spin_lock_init(&workers->lock);
+ spin_lock_init(&workers->order_lock);
workers->max_workers = max;
workers->idle_thresh = 32;
workers->name = name;
workers->ordered = 0;
+ workers->atomic_start_pending = 0;
+ workers->atomic_worker_start = async_helper;
}
/*
* starts new worker threads. This does not enforce the max worker
* count in case you need to temporarily go past it.
*/
-int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
+static int __btrfs_start_workers(struct btrfs_workers *workers,
+ int num_workers)
{
struct btrfs_worker_thread *worker;
int ret = 0;
INIT_LIST_HEAD(&worker->prio_pending);
INIT_LIST_HEAD(&worker->worker_list);
spin_lock_init(&worker->lock);
+
atomic_set(&worker->num_pending, 0);
+ atomic_set(&worker->refs, 1);
worker->workers = workers;
worker->task = kthread_run(worker_loop, worker,
"btrfs-%s-%d", workers->name,
kfree(worker);
goto fail;
}
-
spin_lock_irq(&workers->lock);
list_add_tail(&worker->worker_list, &workers->idle_list);
worker->idle = 1;
workers->num_workers++;
+ workers->num_workers_starting--;
+ WARN_ON(workers->num_workers_starting < 0);
spin_unlock_irq(&workers->lock);
}
return 0;
return ret;
}
+int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
+{
+ spin_lock_irq(&workers->lock);
+ workers->num_workers_starting += num_workers;
+ spin_unlock_irq(&workers->lock);
+ return __btrfs_start_workers(workers, num_workers);
+}
+
/*
* run through the list and find a worker thread that doesn't have a lot
* to do right now. This can return null if we aren't yet at the thread
{
struct btrfs_worker_thread *worker;
struct list_head *next;
- int enforce_min = workers->num_workers < workers->max_workers;
+ int enforce_min;
+
+ enforce_min = (workers->num_workers + workers->num_workers_starting) <
+ workers->max_workers;
/*
* if we find an idle thread, don't move it to the end of the
*/
next = workers->worker_list.next;
worker = list_entry(next, struct btrfs_worker_thread, worker_list);
- atomic_inc(&worker->num_pending);
worker->sequence++;
if (worker->sequence % workers->idle_thresh == 0)
{
struct btrfs_worker_thread *worker;
unsigned long flags;
+ struct list_head *fallback;
again:
spin_lock_irqsave(&workers->lock, flags);
worker = next_worker(workers);
- spin_unlock_irqrestore(&workers->lock, flags);
if (!worker) {
- spin_lock_irqsave(&workers->lock, flags);
- if (workers->num_workers >= workers->max_workers) {
- struct list_head *fallback = NULL;
- /*
- * we have failed to find any workers, just
- * return the force one
- */
- if (!list_empty(&workers->worker_list))
- fallback = workers->worker_list.next;
- if (!list_empty(&workers->idle_list))
- fallback = workers->idle_list.next;
- BUG_ON(!fallback);
- worker = list_entry(fallback,
- struct btrfs_worker_thread, worker_list);
- spin_unlock_irqrestore(&workers->lock, flags);
+ if (workers->num_workers + workers->num_workers_starting >=
+ workers->max_workers) {
+ goto fallback;
+ } else if (workers->atomic_worker_start) {
+ workers->atomic_start_pending = 1;
+ goto fallback;
} else {
+ workers->num_workers_starting++;
spin_unlock_irqrestore(&workers->lock, flags);
/* we're below the limit, start another worker */
- btrfs_start_workers(workers, 1);
+ __btrfs_start_workers(workers, 1);
goto again;
}
}
+ goto found;
+
+fallback:
+ fallback = NULL;
+ /*
+ * we have failed to find any workers, just
+ * return the first one we can find.
+ */
+ if (!list_empty(&workers->worker_list))
+ fallback = workers->worker_list.next;
+ if (!list_empty(&workers->idle_list))
+ fallback = workers->idle_list.next;
+ BUG_ON(!fallback);
+ worker = list_entry(fallback,
+ struct btrfs_worker_thread, worker_list);
+found:
+ /*
+ * this makes sure the worker doesn't exit before it is placed
+ * onto a busy/idle list
+ */
+ atomic_inc(&worker->num_pending);
+ spin_unlock_irqrestore(&workers->lock, flags);
return worker;
}
spin_lock(&worker->workers->lock);
worker->idle = 0;
list_move_tail(&worker->worker_list,
- &worker->workers->worker_list);
+ &worker->workers->worker_list);
spin_unlock(&worker->workers->lock);
}
if (!worker->working) {
worker->working = 1;
}
- spin_unlock_irqrestore(&worker->lock, flags);
if (wake)
wake_up_process(worker->task);
+ spin_unlock_irqrestore(&worker->lock, flags);
out:
return 0;
worker = find_worker(workers);
if (workers->ordered) {
- spin_lock_irqsave(&workers->lock, flags);
+ /*
+ * you're not allowed to do ordered queues from an
+ * interrupt handler
+ */
+ spin_lock(&workers->order_lock);
if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) {
list_add_tail(&work->order_list,
&workers->prio_order_list);
} else {
list_add_tail(&work->order_list, &workers->order_list);
}
- spin_unlock_irqrestore(&workers->lock, flags);
+ spin_unlock(&workers->order_lock);
} else {
INIT_LIST_HEAD(&work->order_list);
}
list_add_tail(&work->list, &worker->prio_pending);
else
list_add_tail(&work->list, &worker->pending);
- atomic_inc(&worker->num_pending);
check_busy_worker(worker);
/*
wake = 1;
worker->working = 1;
- spin_unlock_irqrestore(&worker->lock, flags);
-
if (wake)
wake_up_process(worker->task);
+ spin_unlock_irqrestore(&worker->lock, flags);
+
out:
return 0;
}
/* current number of running workers */
int num_workers;
+ int num_workers_starting;
+
/* max number of workers allowed. changed by btrfs_start_workers */
int max_workers;
/* force completions in the order they were queued */
int ordered;
+ /* more workers required, but in an interrupt handler */
+ int atomic_start_pending;
+
+ /*
+ * are we allowed to sleep while starting workers or are we required
+ * to start them at a later time? If we can't sleep, this indicates
+ * which queue we need to use to schedule thread creation.
+ */
+ struct btrfs_workers *atomic_worker_start;
+
/* list with all the work threads. The workers on the idle thread
* may be actively servicing jobs, but they haven't yet hit the
* idle thresh limit above.
/* lock for finding the next worker thread to queue on */
spinlock_t lock;
+ /* lock for the ordered lists */
+ spinlock_t order_lock;
+
/* extra name for this worker, used for current->name */
char *name;
};
int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work);
int btrfs_start_workers(struct btrfs_workers *workers, int num_workers);
int btrfs_stop_workers(struct btrfs_workers *workers);
-void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max);
+void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max,
+ struct btrfs_workers *async_starter);
int btrfs_requeue_work(struct btrfs_work *work);
void btrfs_set_work_high_prio(struct btrfs_work *work);
#endif
* transid of the trans_handle that last modified this inode
*/
u64 last_trans;
+
+ /*
+ * log transid when this inode was last modified
+ */
+ u64 last_sub_trans;
+
/*
* transid that last logged this inode
*/
*/
u64 last_unlink_trans;
+ /*
+ * Counters to keep track of the number of extent item's we may use due
+ * to delalloc and such. outstanding_extents is the number of extent
+ * items we think we'll end up using, and reserved_extents is the number
+ * of extent items we've reserved metadata for.
+ */
+ spinlock_t accounting_lock;
+ int reserved_extents;
+ int outstanding_extents;
+
/*
* ordered_data_close is set by truncate when a file that used
* to have good data has been truncated to zero. When it is set
* of these.
*/
unsigned ordered_data_close:1;
+ unsigned dummy_inode:1;
struct inode vfs_inode;
};
*/
set_page_extent_mapped(page);
lock_extent(tree, last_offset, end, GFP_NOFS);
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, last_offset,
PAGE_CACHE_SIZE);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (!em || last_offset < em->start ||
(last_offset + PAGE_CACHE_SIZE > extent_map_end(em)) ||
em_tree = &BTRFS_I(inode)->extent_tree;
/* we need the actual starting offset of this extent in the file */
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree,
page_offset(bio->bi_io_vec->bv_page),
PAGE_CACHE_SIZE);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
compressed_len = em->block_len;
cb = kmalloc(compressed_bio_size(root, compressed_len), GFP_NOFS);
int split;
int num_doubles = 0;
+ l = path->nodes[0];
+ slot = path->slots[0];
+ if (extend && data_size + btrfs_item_size_nr(l, slot) +
+ sizeof(struct btrfs_item) > BTRFS_LEAF_DATA_SIZE(root))
+ return -EOVERFLOW;
+
/* first try to make some room by pushing left and right */
if (data_size && ins_key->type != BTRFS_DIR_ITEM_KEY) {
wret = push_leaf_right(trans, root, path, data_size, 0);
*/
#define BTRFS_DEV_ITEMS_OBJECTID 1ULL
+#define BTRFS_BTREE_INODE_OBJECTID 1
+
+#define BTRFS_EMPTY_SUBVOL_DIR_OBJECTID 2
+
/*
* we can actually store much bigger names, but lets not confuse the rest
* of linux
u64 bytes_reserved; /* total bytes the allocator has reserved for
current allocations */
u64 bytes_readonly; /* total bytes that are read only */
-
- /* delalloc accounting */
- u64 bytes_delalloc; /* number of bytes reserved for allocation,
- this space is not necessarily reserved yet
- by the allocator */
+ u64 bytes_super; /* total bytes reserved for the super blocks */
+ u64 bytes_root; /* the number of bytes needed to commit a
+ transaction */
u64 bytes_may_use; /* number of bytes that may be used for
- delalloc */
+ delalloc/allocations */
+ u64 bytes_delalloc; /* number of bytes currently reserved for
+ delayed allocation */
int full; /* indicates that we cannot allocate any more
chunks for this space */
int force_alloc; /* set if we need to force a chunk alloc for
this space */
+ int force_delalloc; /* make people start doing filemap_flush until
+ we're under a threshold */
struct list_head list;
+ /* for controlling how we free up space for allocations */
+ wait_queue_head_t allocate_wait;
+ wait_queue_head_t flush_wait;
+ int allocating_chunk;
+ int flushing;
+
/* for block groups in our same type */
struct list_head block_groups;
spinlock_t lock;
BTRFS_CACHE_FINISHED = 2,
};
+struct btrfs_caching_control {
+ struct list_head list;
+ struct mutex mutex;
+ wait_queue_head_t wait;
+ struct btrfs_block_group_cache *block_group;
+ u64 progress;
+ atomic_t count;
+};
+
struct btrfs_block_group_cache {
struct btrfs_key key;
struct btrfs_block_group_item item;
spinlock_t lock;
u64 pinned;
u64 reserved;
+ u64 bytes_super;
u64 flags;
u64 sectorsize;
int extents_thresh;
int dirty;
/* cache tracking stuff */
- wait_queue_head_t caching_q;
int cached;
+ struct btrfs_caching_control *caching_ctl;
+ u64 last_byte_to_unpin;
struct btrfs_space_info *space_info;
/* the log root tree is a directory of all the other log roots */
struct btrfs_root *log_root_tree;
+
+ spinlock_t fs_roots_radix_lock;
struct radix_tree_root fs_roots_radix;
/* block group cache stuff */
spinlock_t block_group_cache_lock;
struct rb_root block_group_cache_tree;
- struct extent_io_tree pinned_extents;
+ struct extent_io_tree freed_extents[2];
+ struct extent_io_tree *pinned_extents;
/* logical->physical extent mapping */
struct btrfs_mapping_tree mapping_tree;
struct mutex transaction_kthread_mutex;
struct mutex cleaner_mutex;
struct mutex chunk_mutex;
- struct mutex drop_mutex;
struct mutex volume_mutex;
- struct mutex tree_reloc_mutex;
- struct rw_semaphore extent_commit_sem;
-
/*
* this protects the ordered operations list only while we are
* processing all of the entries on it. This way we make
* before jumping into the main commit.
*/
struct mutex ordered_operations_mutex;
+ struct rw_semaphore extent_commit_sem;
+
+ struct rw_semaphore subvol_sem;
+
+ struct srcu_struct subvol_srcu;
struct list_head trans_list;
struct list_head hashers;
struct list_head dead_roots;
+ struct list_head caching_block_groups;
atomic_t nr_async_submits;
atomic_t async_submit_draining;
* A third pool does submit_bio to avoid deadlocking with the other
* two
*/
+ struct btrfs_workers generic_worker;
struct btrfs_workers workers;
struct btrfs_workers delalloc_workers;
struct btrfs_workers endio_workers;
struct btrfs_workers endio_meta_write_workers;
struct btrfs_workers endio_write_workers;
struct btrfs_workers submit_workers;
+ struct btrfs_workers enospc_workers;
/*
* fixup workers take dirty pages that didn't properly go through
* the cow mechanism and make them safe to write. It happens
atomic_t log_writers;
atomic_t log_commit[2];
unsigned long log_transid;
+ unsigned long last_log_commit;
unsigned long log_batch;
+ pid_t log_start_pid;
+ bool log_multiple_pids;
u64 objectid;
u64 last_trans;
u32 stripesize;
u32 type;
- u64 highest_inode;
- u64 last_inode_alloc;
+
+ u64 highest_objectid;
int ref_cows;
int track_dirty;
+ int in_radix;
+
u64 defrag_trans_start;
struct btrfs_key defrag_progress;
struct btrfs_key defrag_max;
#define BTRFS_MOUNT_FLUSHONCOMMIT (1 << 7)
#define BTRFS_MOUNT_SSD_SPREAD (1 << 8)
#define BTRFS_MOUNT_NOSSD (1 << 9)
+#define BTRFS_MOUNT_DISCARD (1 << 10)
#define btrfs_clear_opt(o, opt) ((o) &= ~BTRFS_MOUNT_##opt)
#define btrfs_set_opt(o, opt) ((o) |= BTRFS_MOUNT_##opt)
int btrfs_run_delayed_refs(struct btrfs_trans_handle *trans,
struct btrfs_root *root, unsigned long count);
int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len);
-int btrfs_update_pinned_extents(struct btrfs_root *root,
- u64 bytenr, u64 num, int pin);
+int btrfs_pin_extent(struct btrfs_root *root,
+ u64 bytenr, u64 num, int reserved);
int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct extent_buffer *leaf);
int btrfs_cross_ref_exist(struct btrfs_trans_handle *trans,
u64 root_objectid, u64 owner, u64 offset);
int btrfs_free_reserved_extent(struct btrfs_root *root, u64 start, u64 len);
+int btrfs_prepare_extent_commit(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root);
int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct extent_io_tree *unpin);
+ struct btrfs_root *root);
int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 parent,
int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr);
int btrfs_free_block_groups(struct btrfs_fs_info *info);
int btrfs_read_block_groups(struct btrfs_root *root);
+int btrfs_can_relocate(struct btrfs_root *root, u64 bytenr);
int btrfs_make_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 bytes_used,
u64 type, u64 chunk_objectid, u64 chunk_offset,
void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
-int btrfs_check_metadata_free_space(struct btrfs_root *root);
+int btrfs_reserve_metadata_space(struct btrfs_root *root, int num_items);
+int btrfs_unreserve_metadata_space(struct btrfs_root *root, int num_items);
+int btrfs_unreserve_metadata_for_delalloc(struct btrfs_root *root,
+ struct inode *inode, int num_items);
+int btrfs_reserve_metadata_for_delalloc(struct btrfs_root *root,
+ struct inode *inode, int num_items);
int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
u64 bytes);
void btrfs_free_reserved_data_space(struct btrfs_root *root,
u64 bytes);
void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
u64 bytes);
-void btrfs_free_pinned_extents(struct btrfs_fs_info *info);
/* ctree.c */
int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
int level, int *slot);
struct extent_buffer *parent);
/* root-item.c */
int btrfs_find_root_ref(struct btrfs_root *tree_root,
- struct btrfs_path *path,
- u64 root_id, u64 ref_id);
+ struct btrfs_path *path,
+ u64 root_id, u64 ref_id);
int btrfs_add_root_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *tree_root,
- u64 root_id, u8 type, u64 ref_id,
- u64 dirid, u64 sequence,
+ u64 root_id, u64 ref_id, u64 dirid, u64 sequence,
+ const char *name, int name_len);
+int btrfs_del_root_ref(struct btrfs_trans_handle *trans,
+ struct btrfs_root *tree_root,
+ u64 root_id, u64 ref_id, u64 dirid, u64 *sequence,
const char *name, int name_len);
int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_key *key);
int btrfs_search_root(struct btrfs_root *root, u64 search_start,
u64 *found_objectid);
int btrfs_find_dead_roots(struct btrfs_root *root, u64 objectid);
+int btrfs_find_orphan_roots(struct btrfs_root *tree_root);
int btrfs_set_root_node(struct btrfs_root_item *item,
struct extent_buffer *node);
/* dir-item.c */
struct btrfs_path *path, u64 dir,
u64 objectid, const char *name, int name_len,
int mod);
+struct btrfs_dir_item *
+btrfs_search_dir_index_item(struct btrfs_root *root,
+ struct btrfs_path *path, u64 dirid,
+ const char *name, int name_len);
struct btrfs_dir_item *btrfs_match_dir_item_name(struct btrfs_root *root,
struct btrfs_path *path,
const char *name, int name_len);
struct btrfs_root *root, u64 offset);
int btrfs_del_orphan_item(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 offset);
+int btrfs_find_orphan_item(struct btrfs_root *root, u64 offset);
/* inode-map.c */
int btrfs_find_free_objectid(struct btrfs_trans_handle *trans,
int btrfs_add_link(struct btrfs_trans_handle *trans,
struct inode *parent_inode, struct inode *inode,
const char *name, int name_len, int add_backref, u64 index);
+int btrfs_unlink_subvol(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct inode *dir, u64 objectid,
+ const char *name, int name_len);
int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode, u64 new_size,
int btrfs_writepages(struct address_space *mapping,
struct writeback_control *wbc);
int btrfs_create_subvol_root(struct btrfs_trans_handle *trans,
- struct btrfs_root *new_root, struct dentry *dentry,
+ struct btrfs_root *new_root,
u64 new_dirid, u64 alloc_hint);
int btrfs_merge_bio_hook(struct page *page, unsigned long offset,
size_t size, struct bio *bio, unsigned long bio_flags);
void btrfs_dirty_inode(struct inode *inode);
struct inode *btrfs_alloc_inode(struct super_block *sb);
void btrfs_destroy_inode(struct inode *inode);
+void btrfs_drop_inode(struct inode *inode);
int btrfs_init_cachep(void);
void btrfs_destroy_cachep(void);
long btrfs_ioctl_trans_end(struct file *file);
int btrfs_orphan_del(struct btrfs_trans_handle *trans, struct inode *inode);
void btrfs_orphan_cleanup(struct btrfs_root *root);
int btrfs_cont_expand(struct inode *inode, loff_t size);
+int btrfs_invalidate_inodes(struct btrfs_root *root);
+extern const struct dentry_operations btrfs_dentry_operations;
/* ioctl.c */
long btrfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end,
int skip_pinned);
int btrfs_check_file(struct btrfs_root *root, struct inode *inode);
-extern struct file_operations btrfs_file_operations;
+extern const struct file_operations btrfs_file_operations;
int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
u64 start, u64 end, u64 locked_end,
- u64 inline_limit, u64 *hint_block);
+ u64 inline_limit, u64 *hint_block, int drop_cache);
int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode, u64 start, u64 end);
int btrfs_sync_fs(struct super_block *sb, int wait);
/* acl.c */
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_FS_POSIX_ACL
int btrfs_check_acl(struct inode *inode, int mask);
#else
#define btrfs_check_acl NULL
return btrfs_match_dir_item_name(root, path, name, name_len);
}
+struct btrfs_dir_item *
+btrfs_search_dir_index_item(struct btrfs_root *root,
+ struct btrfs_path *path, u64 dirid,
+ const char *name, int name_len)
+{
+ struct extent_buffer *leaf;
+ struct btrfs_dir_item *di;
+ struct btrfs_key key;
+ u32 nritems;
+ int ret;
+
+ key.objectid = dirid;
+ key.type = BTRFS_DIR_INDEX_KEY;
+ key.offset = 0;
+
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret < 0)
+ return ERR_PTR(ret);
+
+ leaf = path->nodes[0];
+ nritems = btrfs_header_nritems(leaf);
+
+ while (1) {
+ if (path->slots[0] >= nritems) {
+ ret = btrfs_next_leaf(root, path);
+ if (ret < 0)
+ return ERR_PTR(ret);
+ if (ret > 0)
+ break;
+ leaf = path->nodes[0];
+ nritems = btrfs_header_nritems(leaf);
+ continue;
+ }
+
+ btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+ if (key.objectid != dirid || key.type != BTRFS_DIR_INDEX_KEY)
+ break;
+
+ di = btrfs_match_dir_item_name(root, path, name, name_len);
+ if (di)
+ return di;
+
+ path->slots[0]++;
+ }
+ return NULL;
+}
+
struct btrfs_dir_item *btrfs_lookup_xattr(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path, u64 dir,
static struct extent_io_ops btree_extent_io_ops;
static void end_workqueue_fn(struct btrfs_work *work);
+static void free_fs_root(struct btrfs_root *root);
static atomic_t btrfs_bdi_num = ATOMIC_INIT(0);
struct extent_map *em;
int ret;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, len);
if (em) {
em->bdev =
BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev;
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
goto out;
}
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
em = alloc_extent_map(GFP_NOFS);
if (!em) {
em->block_start = 0;
em->bdev = BTRFS_I(inode)->root->fs_info->fs_devices->latest_bdev;
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
if (ret == -EEXIST) {
u64 failed_start = em->start;
free_extent_map(em);
em = NULL;
}
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret)
em = ERR_PTR(ret);
int btrfs_write_tree_block(struct extent_buffer *buf)
{
- return btrfs_fdatawrite_range(buf->first_page->mapping, buf->start,
- buf->start + buf->len - 1, WB_SYNC_ALL);
+ return filemap_fdatawrite_range(buf->first_page->mapping, buf->start,
+ buf->start + buf->len - 1);
}
int btrfs_wait_tree_block_writeback(struct extent_buffer *buf)
{
- return btrfs_wait_on_page_writeback_range(buf->first_page->mapping,
- buf->start, buf->start + buf->len - 1);
+ return filemap_fdatawait_range(buf->first_page->mapping,
+ buf->start, buf->start + buf->len - 1);
}
struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr,
root->fs_info = fs_info;
root->objectid = objectid;
root->last_trans = 0;
- root->highest_inode = 0;
- root->last_inode_alloc = 0;
+ root->highest_objectid = 0;
root->name = NULL;
root->in_sysfs = 0;
root->inode_tree.rb_node = NULL;
atomic_set(&root->log_writers, 0);
root->log_batch = 0;
root->log_transid = 0;
+ root->last_log_commit = 0;
extent_io_tree_init(&root->dirty_log_pages,
fs_info->btree_inode->i_mapping, GFP_NOFS);
root, fs_info, objectid);
ret = btrfs_find_last_root(tree_root, objectid,
&root->root_item, &root->root_key);
+ if (ret > 0)
+ return -ENOENT;
BUG_ON(ret);
generation = btrfs_root_generation(&root->root_item);
blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
blocksize, generation);
- root->commit_root = btrfs_root_node(root);
BUG_ON(!root->node);
+ root->commit_root = btrfs_root_node(root);
return 0;
}
WARN_ON(root->log_root);
root->log_root = log_root;
root->log_transid = 0;
+ root->last_log_commit = 0;
return 0;
}
struct btrfs_fs_info *fs_info = tree_root->fs_info;
struct btrfs_path *path;
struct extent_buffer *l;
- u64 highest_inode;
u64 generation;
u32 blocksize;
int ret = 0;
kfree(root);
return ERR_PTR(ret);
}
- goto insert;
+ goto out;
}
__setup_root(tree_root->nodesize, tree_root->leafsize,
path = btrfs_alloc_path();
BUG_ON(!path);
ret = btrfs_search_slot(NULL, tree_root, location, path, 0, 0);
- if (ret != 0) {
- if (ret > 0)
- ret = -ENOENT;
- goto out;
+ if (ret == 0) {
+ l = path->nodes[0];
+ read_extent_buffer(l, &root->root_item,
+ btrfs_item_ptr_offset(l, path->slots[0]),
+ sizeof(root->root_item));
+ memcpy(&root->root_key, location, sizeof(*location));
}
- l = path->nodes[0];
- read_extent_buffer(l, &root->root_item,
- btrfs_item_ptr_offset(l, path->slots[0]),
- sizeof(root->root_item));
- memcpy(&root->root_key, location, sizeof(*location));
- ret = 0;
-out:
- btrfs_release_path(root, path);
btrfs_free_path(path);
if (ret) {
- kfree(root);
+ if (ret > 0)
+ ret = -ENOENT;
return ERR_PTR(ret);
}
+
generation = btrfs_root_generation(&root->root_item);
blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
blocksize, generation);
root->commit_root = btrfs_root_node(root);
BUG_ON(!root->node);
-insert:
- if (location->objectid != BTRFS_TREE_LOG_OBJECTID) {
+out:
+ if (location->objectid != BTRFS_TREE_LOG_OBJECTID)
root->ref_cows = 1;
- ret = btrfs_find_highest_inode(root, &highest_inode);
- if (ret == 0) {
- root->highest_inode = highest_inode;
- root->last_inode_alloc = highest_inode;
- }
- }
+
return root;
}
return fs_info->dev_root;
if (location->objectid == BTRFS_CSUM_TREE_OBJECTID)
return fs_info->csum_root;
-
+again:
+ spin_lock(&fs_info->fs_roots_radix_lock);
root = radix_tree_lookup(&fs_info->fs_roots_radix,
(unsigned long)location->objectid);
+ spin_unlock(&fs_info->fs_roots_radix_lock);
if (root)
return root;
+ ret = btrfs_find_orphan_item(fs_info->tree_root, location->objectid);
+ if (ret == 0)
+ ret = -ENOENT;
+ if (ret < 0)
+ return ERR_PTR(ret);
+
root = btrfs_read_fs_root_no_radix(fs_info->tree_root, location);
if (IS_ERR(root))
return root;
+ WARN_ON(btrfs_root_refs(&root->root_item) == 0);
set_anon_super(&root->anon_super, NULL);
+ ret = radix_tree_preload(GFP_NOFS & ~__GFP_HIGHMEM);
+ if (ret)
+ goto fail;
+
+ spin_lock(&fs_info->fs_roots_radix_lock);
ret = radix_tree_insert(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid,
root);
+ if (ret == 0)
+ root->in_radix = 1;
+ spin_unlock(&fs_info->fs_roots_radix_lock);
+ radix_tree_preload_end();
if (ret) {
- free_extent_buffer(root->node);
- kfree(root);
- return ERR_PTR(ret);
+ if (ret == -EEXIST) {
+ free_fs_root(root);
+ goto again;
+ }
+ goto fail;
}
- if (!(fs_info->sb->s_flags & MS_RDONLY)) {
- ret = btrfs_find_dead_roots(fs_info->tree_root,
- root->root_key.objectid);
- BUG_ON(ret);
+
+ ret = btrfs_find_dead_roots(fs_info->tree_root,
+ root->root_key.objectid);
+ WARN_ON(ret);
+
+ if (!(fs_info->sb->s_flags & MS_RDONLY))
btrfs_orphan_cleanup(root);
- }
+
return root;
+fail:
+ free_fs_root(root);
+ return ERR_PTR(ret);
}
struct btrfs_root *btrfs_read_fs_root(struct btrfs_fs_info *fs_info,
struct btrfs_key *location,
const char *name, int namelen)
{
+ return btrfs_read_fs_root_no_name(fs_info, location);
+#if 0
struct btrfs_root *root;
int ret;
kfree(root);
return ERR_PTR(ret);
}
-#if 0
+
ret = btrfs_sysfs_add_root(root);
if (ret) {
free_extent_buffer(root->node);
kfree(root);
return ERR_PTR(ret);
}
-#endif
root->in_sysfs = 1;
return root;
+#endif
}
static int btrfs_congested_fn(void *congested_data, int bdi_bits)
offset = page_offset(page);
em_tree = &BTRFS_I(inode)->extent_tree;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, offset, PAGE_CACHE_SIZE);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (!em) {
__unplug_io_fn(bdi, page);
return;
err = bdi_register(bdi, NULL, "btrfs-%d",
atomic_inc_return(&btrfs_bdi_num));
- if (err)
+ if (err) {
+ bdi_destroy(bdi);
return err;
+ }
bdi->ra_pages = default_backing_dev_info.ra_pages;
bdi->unplug_io_fn = btrfs_unplug_io_fn;
break;
vfs_check_frozen(root->fs_info->sb, SB_FREEZE_WRITE);
- mutex_lock(&root->fs_info->cleaner_mutex);
- btrfs_clean_old_snapshots(root);
- mutex_unlock(&root->fs_info->cleaner_mutex);
+
+ if (!(root->fs_info->sb->s_flags & MS_RDONLY) &&
+ mutex_trylock(&root->fs_info->cleaner_mutex)) {
+ btrfs_clean_old_snapshots(root);
+ mutex_unlock(&root->fs_info->cleaner_mutex);
+ }
if (freezing(current)) {
refrigerator();
err = -ENOMEM;
goto fail;
}
- INIT_RADIX_TREE(&fs_info->fs_roots_radix, GFP_NOFS);
+
+ ret = init_srcu_struct(&fs_info->subvol_srcu);
+ if (ret) {
+ err = ret;
+ goto fail;
+ }
+
+ ret = setup_bdi(fs_info, &fs_info->bdi);
+ if (ret) {
+ err = ret;
+ goto fail_srcu;
+ }
+
+ fs_info->btree_inode = new_inode(sb);
+ if (!fs_info->btree_inode) {
+ err = -ENOMEM;
+ goto fail_bdi;
+ }
+
+ INIT_RADIX_TREE(&fs_info->fs_roots_radix, GFP_ATOMIC);
INIT_LIST_HEAD(&fs_info->trans_list);
INIT_LIST_HEAD(&fs_info->dead_roots);
INIT_LIST_HEAD(&fs_info->hashers);
INIT_LIST_HEAD(&fs_info->delalloc_inodes);
INIT_LIST_HEAD(&fs_info->ordered_operations);
+ INIT_LIST_HEAD(&fs_info->caching_block_groups);
spin_lock_init(&fs_info->delalloc_lock);
spin_lock_init(&fs_info->new_trans_lock);
spin_lock_init(&fs_info->ref_cache_lock);
+ spin_lock_init(&fs_info->fs_roots_radix_lock);
init_completion(&fs_info->kobj_unregister);
fs_info->tree_root = tree_root;
fs_info->sb = sb;
fs_info->max_extent = (u64)-1;
fs_info->max_inline = 8192 * 1024;
- if (setup_bdi(fs_info, &fs_info->bdi))
- goto fail_bdi;
- fs_info->btree_inode = new_inode(sb);
- fs_info->btree_inode->i_ino = 1;
- fs_info->btree_inode->i_nlink = 1;
- fs_info->metadata_ratio = 8;
+ fs_info->metadata_ratio = 0;
fs_info->thread_pool_size = min_t(unsigned long,
num_online_cpus() + 2, 8);
sb->s_blocksize_bits = blksize_bits(4096);
sb->s_bdi = &fs_info->bdi;
+ fs_info->btree_inode->i_ino = BTRFS_BTREE_INODE_OBJECTID;
+ fs_info->btree_inode->i_nlink = 1;
/*
* we set the i_size on the btree inode to the max possible int.
* the real end of the address space is determined by all of
BTRFS_I(fs_info->btree_inode)->io_tree.ops = &btree_extent_io_ops;
+ BTRFS_I(fs_info->btree_inode)->root = tree_root;
+ memset(&BTRFS_I(fs_info->btree_inode)->location, 0,
+ sizeof(struct btrfs_key));
+ BTRFS_I(fs_info->btree_inode)->dummy_inode = 1;
+ insert_inode_hash(fs_info->btree_inode);
+
spin_lock_init(&fs_info->block_group_cache_lock);
fs_info->block_group_cache_tree.rb_node = NULL;
- extent_io_tree_init(&fs_info->pinned_extents,
+ extent_io_tree_init(&fs_info->freed_extents[0],
fs_info->btree_inode->i_mapping, GFP_NOFS);
+ extent_io_tree_init(&fs_info->freed_extents[1],
+ fs_info->btree_inode->i_mapping, GFP_NOFS);
+ fs_info->pinned_extents = &fs_info->freed_extents[0];
fs_info->do_barriers = 1;
- BTRFS_I(fs_info->btree_inode)->root = tree_root;
- memset(&BTRFS_I(fs_info->btree_inode)->location, 0,
- sizeof(struct btrfs_key));
- insert_inode_hash(fs_info->btree_inode);
mutex_init(&fs_info->trans_mutex);
mutex_init(&fs_info->ordered_operations_mutex);
mutex_init(&fs_info->tree_log_mutex);
- mutex_init(&fs_info->drop_mutex);
mutex_init(&fs_info->chunk_mutex);
mutex_init(&fs_info->transaction_kthread_mutex);
mutex_init(&fs_info->cleaner_mutex);
mutex_init(&fs_info->volume_mutex);
- mutex_init(&fs_info->tree_reloc_mutex);
init_rwsem(&fs_info->extent_commit_sem);
+ init_rwsem(&fs_info->subvol_sem);
btrfs_init_free_cluster(&fs_info->meta_alloc_cluster);
btrfs_init_free_cluster(&fs_info->data_alloc_cluster);
goto fail_iput;
}
- /*
- * we need to start all the end_io workers up front because the
- * queue work function gets called at interrupt time, and so it
- * cannot dynamically grow.
- */
+ btrfs_init_workers(&fs_info->generic_worker,
+ "genwork", 1, NULL);
+
btrfs_init_workers(&fs_info->workers, "worker",
- fs_info->thread_pool_size);
+ fs_info->thread_pool_size,
+ &fs_info->generic_worker);
btrfs_init_workers(&fs_info->delalloc_workers, "delalloc",
- fs_info->thread_pool_size);
+ fs_info->thread_pool_size,
+ &fs_info->generic_worker);
btrfs_init_workers(&fs_info->submit_workers, "submit",
min_t(u64, fs_devices->num_devices,
- fs_info->thread_pool_size));
+ fs_info->thread_pool_size),
+ &fs_info->generic_worker);
+ btrfs_init_workers(&fs_info->enospc_workers, "enospc",
+ fs_info->thread_pool_size,
+ &fs_info->generic_worker);
/* a higher idle thresh on the submit workers makes it much more
* likely that bios will be send down in a sane order to the
fs_info->delalloc_workers.idle_thresh = 2;
fs_info->delalloc_workers.ordered = 1;
- btrfs_init_workers(&fs_info->fixup_workers, "fixup", 1);
+ btrfs_init_workers(&fs_info->fixup_workers, "fixup", 1,
+ &fs_info->generic_worker);
btrfs_init_workers(&fs_info->endio_workers, "endio",
- fs_info->thread_pool_size);
+ fs_info->thread_pool_size,
+ &fs_info->generic_worker);
btrfs_init_workers(&fs_info->endio_meta_workers, "endio-meta",
- fs_info->thread_pool_size);
+ fs_info->thread_pool_size,
+ &fs_info->generic_worker);
btrfs_init_workers(&fs_info->endio_meta_write_workers,
- "endio-meta-write", fs_info->thread_pool_size);
+ "endio-meta-write", fs_info->thread_pool_size,
+ &fs_info->generic_worker);
btrfs_init_workers(&fs_info->endio_write_workers, "endio-write",
- fs_info->thread_pool_size);
+ fs_info->thread_pool_size,
+ &fs_info->generic_worker);
/*
* endios are largely parallel and should have a very
fs_info->endio_workers.idle_thresh = 4;
fs_info->endio_meta_workers.idle_thresh = 4;
- fs_info->endio_write_workers.idle_thresh = 64;
- fs_info->endio_meta_write_workers.idle_thresh = 64;
+ fs_info->endio_write_workers.idle_thresh = 2;
+ fs_info->endio_meta_write_workers.idle_thresh = 2;
btrfs_start_workers(&fs_info->workers, 1);
+ btrfs_start_workers(&fs_info->generic_worker, 1);
btrfs_start_workers(&fs_info->submit_workers, 1);
btrfs_start_workers(&fs_info->delalloc_workers, 1);
btrfs_start_workers(&fs_info->fixup_workers, 1);
- btrfs_start_workers(&fs_info->endio_workers, fs_info->thread_pool_size);
- btrfs_start_workers(&fs_info->endio_meta_workers,
- fs_info->thread_pool_size);
- btrfs_start_workers(&fs_info->endio_meta_write_workers,
- fs_info->thread_pool_size);
- btrfs_start_workers(&fs_info->endio_write_workers,
- fs_info->thread_pool_size);
+ btrfs_start_workers(&fs_info->endio_workers, 1);
+ btrfs_start_workers(&fs_info->endio_meta_workers, 1);
+ btrfs_start_workers(&fs_info->endio_meta_write_workers, 1);
+ btrfs_start_workers(&fs_info->endio_write_workers, 1);
+ btrfs_start_workers(&fs_info->enospc_workers, 1);
fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super);
fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages,
}
}
+ ret = btrfs_find_orphan_roots(tree_root);
+ BUG_ON(ret);
+
if (!(sb->s_flags & MS_RDONLY)) {
ret = btrfs_recover_relocation(tree_root);
BUG_ON(ret);
free_extent_buffer(chunk_root->node);
free_extent_buffer(chunk_root->commit_root);
fail_sb_buffer:
+ btrfs_stop_workers(&fs_info->generic_worker);
btrfs_stop_workers(&fs_info->fixup_workers);
btrfs_stop_workers(&fs_info->delalloc_workers);
btrfs_stop_workers(&fs_info->workers);
btrfs_stop_workers(&fs_info->endio_meta_write_workers);
btrfs_stop_workers(&fs_info->endio_write_workers);
btrfs_stop_workers(&fs_info->submit_workers);
+ btrfs_stop_workers(&fs_info->enospc_workers);
fail_iput:
invalidate_inode_pages2(fs_info->btree_inode->i_mapping);
iput(fs_info->btree_inode);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
fail_bdi:
bdi_destroy(&fs_info->bdi);
+fail_srcu:
+ cleanup_srcu_struct(&fs_info->subvol_srcu);
fail:
kfree(extent_root);
kfree(tree_root);
int btrfs_free_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root)
{
- WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
+ spin_lock(&fs_info->fs_roots_radix_lock);
radix_tree_delete(&fs_info->fs_roots_radix,
(unsigned long)root->root_key.objectid);
+ spin_unlock(&fs_info->fs_roots_radix_lock);
+
+ if (btrfs_root_refs(&root->root_item) == 0)
+ synchronize_srcu(&fs_info->subvol_srcu);
+
+ free_fs_root(root);
+ return 0;
+}
+
+static void free_fs_root(struct btrfs_root *root)
+{
+ WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
if (root->anon_super.s_dev) {
down_write(&root->anon_super.s_umount);
kill_anon_super(&root->anon_super);
}
- if (root->node)
- free_extent_buffer(root->node);
- if (root->commit_root)
- free_extent_buffer(root->commit_root);
+ free_extent_buffer(root->node);
+ free_extent_buffer(root->commit_root);
kfree(root->name);
kfree(root);
- return 0;
}
static int del_fs_roots(struct btrfs_fs_info *fs_info)
struct btrfs_root *gang[8];
int i;
+ while (!list_empty(&fs_info->dead_roots)) {
+ gang[0] = list_entry(fs_info->dead_roots.next,
+ struct btrfs_root, root_list);
+ list_del(&gang[0]->root_list);
+
+ if (gang[0]->in_radix) {
+ btrfs_free_fs_root(fs_info, gang[0]);
+ } else {
+ free_extent_buffer(gang[0]->node);
+ free_extent_buffer(gang[0]->commit_root);
+ kfree(gang[0]);
+ }
+ }
+
while (1) {
ret = radix_tree_gang_lookup(&fs_info->fs_roots_radix,
(void **)gang, 0,
root_objectid = gang[ret - 1]->root_key.objectid + 1;
for (i = 0; i < ret; i++) {
root_objectid = gang[i]->root_key.objectid;
- ret = btrfs_find_dead_roots(fs_info->tree_root,
- root_objectid);
- BUG_ON(ret);
btrfs_orphan_cleanup(gang[i]);
}
root_objectid++;
free_extent_buffer(root->fs_info->csum_root->commit_root);
btrfs_free_block_groups(root->fs_info);
- btrfs_free_pinned_extents(root->fs_info);
del_fs_roots(fs_info);
iput(fs_info->btree_inode);
+ btrfs_stop_workers(&fs_info->generic_worker);
btrfs_stop_workers(&fs_info->fixup_workers);
btrfs_stop_workers(&fs_info->delalloc_workers);
btrfs_stop_workers(&fs_info->workers);
btrfs_stop_workers(&fs_info->endio_meta_write_workers);
btrfs_stop_workers(&fs_info->endio_write_workers);
btrfs_stop_workers(&fs_info->submit_workers);
+ btrfs_stop_workers(&fs_info->enospc_workers);
btrfs_close_devices(fs_info->fs_devices);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
bdi_destroy(&fs_info->bdi);
+ cleanup_srcu_struct(&fs_info->subvol_srcu);
kfree(fs_info->extent_root);
kfree(fs_info->tree_root);
len = BTRFS_FID_SIZE_NON_CONNECTABLE;
type = FILEID_BTRFS_WITHOUT_PARENT;
- fid->objectid = BTRFS_I(inode)->location.objectid;
+ fid->objectid = inode->i_ino;
fid->root_objectid = BTRFS_I(inode)->root->objectid;
fid->gen = inode->i_generation;
}
static struct dentry *btrfs_get_dentry(struct super_block *sb, u64 objectid,
- u64 root_objectid, u32 generation)
+ u64 root_objectid, u32 generation,
+ int check_generation)
{
+ struct btrfs_fs_info *fs_info = btrfs_sb(sb)->fs_info;
struct btrfs_root *root;
+ struct dentry *dentry;
struct inode *inode;
struct btrfs_key key;
+ int index;
+ int err = 0;
+
+ if (objectid < BTRFS_FIRST_FREE_OBJECTID)
+ return ERR_PTR(-ESTALE);
key.objectid = root_objectid;
btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
key.offset = (u64)-1;
- root = btrfs_read_fs_root_no_name(btrfs_sb(sb)->fs_info, &key);
- if (IS_ERR(root))
- return ERR_CAST(root);
+ index = srcu_read_lock(&fs_info->subvol_srcu);
+
+ root = btrfs_read_fs_root_no_name(fs_info, &key);
+ if (IS_ERR(root)) {
+ err = PTR_ERR(root);
+ goto fail;
+ }
+
+ if (btrfs_root_refs(&root->root_item) == 0) {
+ err = -ENOENT;
+ goto fail;
+ }
key.objectid = objectid;
btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
key.offset = 0;
inode = btrfs_iget(sb, &key, root);
- if (IS_ERR(inode))
- return (void *)inode;
+ if (IS_ERR(inode)) {
+ err = PTR_ERR(inode);
+ goto fail;
+ }
+
+ srcu_read_unlock(&fs_info->subvol_srcu, index);
- if (generation != inode->i_generation) {
+ if (check_generation && generation != inode->i_generation) {
iput(inode);
return ERR_PTR(-ESTALE);
}
- return d_obtain_alias(inode);
+ dentry = d_obtain_alias(inode);
+ if (!IS_ERR(dentry))
+ dentry->d_op = &btrfs_dentry_operations;
+ return dentry;
+fail:
+ srcu_read_unlock(&fs_info->subvol_srcu, index);
+ return ERR_PTR(err);
}
static struct dentry *btrfs_fh_to_parent(struct super_block *sb, struct fid *fh,
objectid = fid->parent_objectid;
generation = fid->parent_gen;
- return btrfs_get_dentry(sb, objectid, root_objectid, generation);
+ return btrfs_get_dentry(sb, objectid, root_objectid, generation, 1);
}
static struct dentry *btrfs_fh_to_dentry(struct super_block *sb, struct fid *fh,
root_objectid = fid->root_objectid;
generation = fid->gen;
- return btrfs_get_dentry(sb, objectid, root_objectid, generation);
+ return btrfs_get_dentry(sb, objectid, root_objectid, generation, 1);
}
static struct dentry *btrfs_get_parent(struct dentry *child)
{
struct inode *dir = child->d_inode;
+ static struct dentry *dentry;
struct btrfs_root *root = BTRFS_I(dir)->root;
- struct btrfs_key key;
struct btrfs_path *path;
struct extent_buffer *leaf;
- int slot;
- u64 objectid;
+ struct btrfs_root_ref *ref;
+ struct btrfs_key key;
+ struct btrfs_key found_key;
int ret;
path = btrfs_alloc_path();
- key.objectid = dir->i_ino;
- btrfs_set_key_type(&key, BTRFS_INODE_REF_KEY);
- key.offset = (u64)-1;
+ if (dir->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ key.objectid = root->root_key.objectid;
+ key.type = BTRFS_ROOT_BACKREF_KEY;
+ key.offset = (u64)-1;
+ root = root->fs_info->tree_root;
+ } else {
+ key.objectid = dir->i_ino;
+ key.type = BTRFS_INODE_REF_KEY;
+ key.offset = (u64)-1;
+ }
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
- if (ret < 0) {
- /* Error */
- btrfs_free_path(path);
- return ERR_PTR(ret);
+ if (ret < 0)
+ goto fail;
+
+ BUG_ON(ret == 0);
+ if (path->slots[0] == 0) {
+ ret = -ENOENT;
+ goto fail;
}
+
+ path->slots[0]--;
leaf = path->nodes[0];
- slot = path->slots[0];
- if (ret) {
- /* btrfs_search_slot() returns the slot where we'd want to
- insert a backref for parent inode #0xFFFFFFFFFFFFFFFF.
- The _real_ backref, telling us what the parent inode
- _actually_ is, will be in the slot _before_ the one
- that btrfs_search_slot() returns. */
- if (!slot) {
- /* Unless there is _no_ key in the tree before... */
- btrfs_free_path(path);
- return ERR_PTR(-EIO);
- }
- slot--;
+
+ btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
+ if (found_key.objectid != key.objectid || found_key.type != key.type) {
+ ret = -ENOENT;
+ goto fail;
}
- btrfs_item_key_to_cpu(leaf, &key, slot);
+ if (found_key.type == BTRFS_ROOT_BACKREF_KEY) {
+ ref = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_root_ref);
+ key.objectid = btrfs_root_ref_dirid(leaf, ref);
+ } else {
+ key.objectid = found_key.offset;
+ }
btrfs_free_path(path);
- if (key.objectid != dir->i_ino || key.type != BTRFS_INODE_REF_KEY)
- return ERR_PTR(-EINVAL);
-
- objectid = key.offset;
-
- /* If we are already at the root of a subvol, return the real root */
- if (objectid == dir->i_ino)
- return dget(dir->i_sb->s_root);
+ if (found_key.type == BTRFS_ROOT_BACKREF_KEY) {
+ return btrfs_get_dentry(root->fs_info->sb, key.objectid,
+ found_key.offset, 0, 0);
+ }
- /* Build a new key for the inode item */
- key.objectid = objectid;
- btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
+ key.type = BTRFS_INODE_ITEM_KEY;
key.offset = 0;
-
- return d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root));
+ dentry = d_obtain_alias(btrfs_iget(root->fs_info->sb, &key, root));
+ if (!IS_ERR(dentry))
+ dentry->d_op = &btrfs_dentry_operations;
+ return dentry;
+fail:
+ btrfs_free_path(path);
+ return ERR_PTR(ret);
}
const struct export_operations btrfs_export_ops = {
#include "locking.h"
#include "free-space-cache.h"
-static int update_reserved_extents(struct btrfs_root *root,
- u64 bytenr, u64 num, int reserve);
static int update_block_group(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, int alloc,
int mark_free);
+static int update_reserved_extents(struct btrfs_block_group_cache *cache,
+ u64 num_bytes, int reserve);
static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 parent,
u64 parent, u64 root_objectid,
u64 flags, struct btrfs_disk_key *key,
int level, struct btrfs_key *ins);
-
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force);
+static int pin_down_bytes(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ u64 bytenr, u64 num_bytes,
+ int is_data, int reserved,
+ struct extent_buffer **must_clean);
+static int find_next_key(struct btrfs_path *path, int level,
+ struct btrfs_key *key);
+static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
+ int dump_block_groups);
static noinline int
block_group_cache_done(struct btrfs_block_group_cache *cache)
return ret;
}
-/*
- * We always set EXTENT_LOCKED for the super mirror extents so we don't
- * overwrite them, so those bits need to be unset. Also, if we are unmounting
- * with pinned extents still sitting there because we had a block group caching,
- * we need to clear those now, since we are done.
- */
-void btrfs_free_pinned_extents(struct btrfs_fs_info *info)
+static int add_excluded_extent(struct btrfs_root *root,
+ u64 start, u64 num_bytes)
{
- u64 start, end, last = 0;
- int ret;
+ u64 end = start + num_bytes - 1;
+ set_extent_bits(&root->fs_info->freed_extents[0],
+ start, end, EXTENT_UPTODATE, GFP_NOFS);
+ set_extent_bits(&root->fs_info->freed_extents[1],
+ start, end, EXTENT_UPTODATE, GFP_NOFS);
+ return 0;
+}
- while (1) {
- ret = find_first_extent_bit(&info->pinned_extents, last,
- &start, &end,
- EXTENT_LOCKED|EXTENT_DIRTY);
- if (ret)
- break;
+static void free_excluded_extents(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
+{
+ u64 start, end;
- clear_extent_bits(&info->pinned_extents, start, end,
- EXTENT_LOCKED|EXTENT_DIRTY, GFP_NOFS);
- last = end+1;
- }
+ start = cache->key.objectid;
+ end = start + cache->key.offset - 1;
+
+ clear_extent_bits(&root->fs_info->freed_extents[0],
+ start, end, EXTENT_UPTODATE, GFP_NOFS);
+ clear_extent_bits(&root->fs_info->freed_extents[1],
+ start, end, EXTENT_UPTODATE, GFP_NOFS);
}
-static int remove_sb_from_cache(struct btrfs_root *root,
- struct btrfs_block_group_cache *cache)
+static int exclude_super_stripes(struct btrfs_root *root,
+ struct btrfs_block_group_cache *cache)
{
- struct btrfs_fs_info *fs_info = root->fs_info;
u64 bytenr;
u64 *logical;
int stripe_len;
cache->key.objectid, bytenr,
0, &logical, &nr, &stripe_len);
BUG_ON(ret);
+
while (nr--) {
- try_lock_extent(&fs_info->pinned_extents,
- logical[nr],
- logical[nr] + stripe_len - 1, GFP_NOFS);
+ cache->bytes_super += stripe_len;
+ ret = add_excluded_extent(root, logical[nr],
+ stripe_len);
+ BUG_ON(ret);
}
+
kfree(logical);
}
-
return 0;
}
+static struct btrfs_caching_control *
+get_caching_control(struct btrfs_block_group_cache *cache)
+{
+ struct btrfs_caching_control *ctl;
+
+ spin_lock(&cache->lock);
+ if (cache->cached != BTRFS_CACHE_STARTED) {
+ spin_unlock(&cache->lock);
+ return NULL;
+ }
+
+ ctl = cache->caching_ctl;
+ atomic_inc(&ctl->count);
+ spin_unlock(&cache->lock);
+ return ctl;
+}
+
+static void put_caching_control(struct btrfs_caching_control *ctl)
+{
+ if (atomic_dec_and_test(&ctl->count))
+ kfree(ctl);
+}
+
/*
* this is only called by cache_block_group, since we could have freed extents
* we need to check the pinned_extents for any extents that can't be used yet
int ret;
while (start < end) {
- ret = find_first_extent_bit(&info->pinned_extents, start,
+ ret = find_first_extent_bit(info->pinned_extents, start,
&extent_start, &extent_end,
- EXTENT_DIRTY|EXTENT_LOCKED);
+ EXTENT_DIRTY | EXTENT_UPTODATE);
if (ret)
break;
{
struct btrfs_block_group_cache *block_group = data;
struct btrfs_fs_info *fs_info = block_group->fs_info;
- u64 last = 0;
+ struct btrfs_caching_control *caching_ctl = block_group->caching_ctl;
+ struct btrfs_root *extent_root = fs_info->extent_root;
struct btrfs_path *path;
- int ret = 0;
- struct btrfs_key key;
struct extent_buffer *leaf;
- int slot;
+ struct btrfs_key key;
u64 total_found = 0;
-
- BUG_ON(!fs_info);
+ u64 last = 0;
+ u32 nritems;
+ int ret = 0;
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
- atomic_inc(&block_group->space_info->caching_threads);
+ exclude_super_stripes(extent_root, block_group);
+ spin_lock(&block_group->space_info->lock);
+ block_group->space_info->bytes_super += block_group->bytes_super;
+ spin_unlock(&block_group->space_info->lock);
+
last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+
/*
* We don't want to deadlock with somebody trying to allocate a new
* extent for the extent root while also trying to search the extent
key.objectid = last;
key.offset = 0;
- btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
+ key.type = BTRFS_EXTENT_ITEM_KEY;
again:
+ mutex_lock(&caching_ctl->mutex);
/* need to make sure the commit_root doesn't disappear */
down_read(&fs_info->extent_commit_sem);
- ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
+ ret = btrfs_search_slot(NULL, extent_root, &key, path, 0, 0);
if (ret < 0)
goto err;
+ leaf = path->nodes[0];
+ nritems = btrfs_header_nritems(leaf);
+
while (1) {
smp_mb();
- if (block_group->fs_info->closing > 1) {
+ if (fs_info->closing > 1) {
last = (u64)-1;
break;
}
- leaf = path->nodes[0];
- slot = path->slots[0];
- if (slot >= btrfs_header_nritems(leaf)) {
- ret = btrfs_next_leaf(fs_info->extent_root, path);
- if (ret < 0)
- goto err;
- else if (ret)
+ if (path->slots[0] < nritems) {
+ btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+ } else {
+ ret = find_next_key(path, 0, &key);
+ if (ret)
break;
- if (need_resched() ||
- btrfs_transaction_in_commit(fs_info)) {
- leaf = path->nodes[0];
-
- /* this shouldn't happen, but if the
- * leaf is empty just move on.
- */
- if (btrfs_header_nritems(leaf) == 0)
- break;
- /*
- * we need to copy the key out so that
- * we are sure the next search advances
- * us forward in the btree.
- */
- btrfs_item_key_to_cpu(leaf, &key, 0);
- btrfs_release_path(fs_info->extent_root, path);
- up_read(&fs_info->extent_commit_sem);
+ caching_ctl->progress = last;
+ btrfs_release_path(extent_root, path);
+ up_read(&fs_info->extent_commit_sem);
+ mutex_unlock(&caching_ctl->mutex);
+ if (btrfs_transaction_in_commit(fs_info))
schedule_timeout(1);
- goto again;
- }
+ else
+ cond_resched();
+ goto again;
+ }
+ if (key.objectid < block_group->key.objectid) {
+ path->slots[0]++;
continue;
}
- btrfs_item_key_to_cpu(leaf, &key, slot);
- if (key.objectid < block_group->key.objectid)
- goto next;
if (key.objectid >= block_group->key.objectid +
block_group->key.offset)
break;
- if (btrfs_key_type(&key) == BTRFS_EXTENT_ITEM_KEY) {
+ if (key.type == BTRFS_EXTENT_ITEM_KEY) {
total_found += add_new_free_space(block_group,
fs_info, last,
key.objectid);
last = key.objectid + key.offset;
- }
- if (total_found > (1024 * 1024 * 2)) {
- total_found = 0;
- wake_up(&block_group->caching_q);
+ if (total_found > (1024 * 1024 * 2)) {
+ total_found = 0;
+ wake_up(&caching_ctl->wait);
+ }
}
-next:
path->slots[0]++;
}
ret = 0;
total_found += add_new_free_space(block_group, fs_info, last,
block_group->key.objectid +
block_group->key.offset);
+ caching_ctl->progress = (u64)-1;
spin_lock(&block_group->lock);
+ block_group->caching_ctl = NULL;
block_group->cached = BTRFS_CACHE_FINISHED;
spin_unlock(&block_group->lock);
err:
btrfs_free_path(path);
up_read(&fs_info->extent_commit_sem);
- atomic_dec(&block_group->space_info->caching_threads);
- wake_up(&block_group->caching_q);
+ free_excluded_extents(extent_root, block_group);
+
+ mutex_unlock(&caching_ctl->mutex);
+ wake_up(&caching_ctl->wait);
+
+ put_caching_control(caching_ctl);
+ atomic_dec(&block_group->space_info->caching_threads);
return 0;
}
static int cache_block_group(struct btrfs_block_group_cache *cache)
{
+ struct btrfs_fs_info *fs_info = cache->fs_info;
+ struct btrfs_caching_control *caching_ctl;
struct task_struct *tsk;
int ret = 0;
+ smp_mb();
+ if (cache->cached != BTRFS_CACHE_NO)
+ return 0;
+
+ caching_ctl = kzalloc(sizeof(*caching_ctl), GFP_KERNEL);
+ BUG_ON(!caching_ctl);
+
+ INIT_LIST_HEAD(&caching_ctl->list);
+ mutex_init(&caching_ctl->mutex);
+ init_waitqueue_head(&caching_ctl->wait);
+ caching_ctl->block_group = cache;
+ caching_ctl->progress = cache->key.objectid;
+ /* one for caching kthread, one for caching block group list */
+ atomic_set(&caching_ctl->count, 2);
+
spin_lock(&cache->lock);
if (cache->cached != BTRFS_CACHE_NO) {
spin_unlock(&cache->lock);
- return ret;
+ kfree(caching_ctl);
+ return 0;
}
+ cache->caching_ctl = caching_ctl;
cache->cached = BTRFS_CACHE_STARTED;
spin_unlock(&cache->lock);
+ down_write(&fs_info->extent_commit_sem);
+ list_add_tail(&caching_ctl->list, &fs_info->caching_block_groups);
+ up_write(&fs_info->extent_commit_sem);
+
+ atomic_inc(&cache->space_info->caching_threads);
+
tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
cache->key.objectid);
if (IS_ERR(tsk)) {
return ret;
}
-#ifdef BIO_RW_DISCARD
static void btrfs_issue_discard(struct block_device *bdev,
u64 start, u64 len)
{
blkdev_issue_discard(bdev, start >> 9, len >> 9, GFP_KERNEL,
DISCARD_FL_BARRIER);
}
-#endif
static int btrfs_discard_extent(struct btrfs_root *root, u64 bytenr,
u64 num_bytes)
{
-#ifdef BIO_RW_DISCARD
int ret;
u64 map_length = num_bytes;
struct btrfs_multi_bio *multi = NULL;
+ if (!btrfs_test_opt(root, DISCARD))
+ return 0;
+
/* Tell the block device(s) that the sectors can be discarded */
ret = btrfs_map_block(&root->fs_info->mapping_tree, READ,
bytenr, &map_length, &multi, 0);
}
return ret;
-#else
- return 0;
-#endif
}
int btrfs_inc_extent_ref(struct btrfs_trans_handle *trans,
parent, ref_root, flags,
ref->objectid, ref->offset,
&ins, node->ref_mod);
- update_reserved_extents(root, ins.objectid, ins.offset, 0);
} else if (node->action == BTRFS_ADD_DELAYED_REF) {
ret = __btrfs_inc_extent_ref(trans, root, node->bytenr,
node->num_bytes, parent,
extent_op->flags_to_set,
&extent_op->key,
ref->level, &ins);
- update_reserved_extents(root, ins.objectid, ins.offset, 0);
} else if (node->action == BTRFS_ADD_DELAYED_REF) {
ret = __btrfs_inc_extent_ref(trans, root, node->bytenr,
node->num_bytes, parent, ref_root,
BUG_ON(extent_op);
head = btrfs_delayed_node_to_head(node);
if (insert_reserved) {
+ int mark_free = 0;
+ struct extent_buffer *must_clean = NULL;
+
+ ret = pin_down_bytes(trans, root, NULL,
+ node->bytenr, node->num_bytes,
+ head->is_data, 1, &must_clean);
+ if (ret > 0)
+ mark_free = 1;
+
+ if (must_clean) {
+ clean_tree_block(NULL, root, must_clean);
+ btrfs_tree_unlock(must_clean);
+ free_extent_buffer(must_clean);
+ }
if (head->is_data) {
ret = btrfs_del_csums(trans, root,
node->bytenr,
node->num_bytes);
BUG_ON(ret);
}
- btrfs_update_pinned_extents(root, node->bytenr,
- node->num_bytes, 1);
- update_reserved_extents(root, node->bytenr,
- node->num_bytes, 0);
+ if (mark_free) {
+ ret = btrfs_free_reserved_extent(root,
+ node->bytenr,
+ node->num_bytes);
+ BUG_ON(ret);
+ }
}
mutex_unlock(&head->mutex);
return 0;
alloc_target);
}
+static u64 calculate_bytes_needed(struct btrfs_root *root, int num_items)
+{
+ u64 num_bytes;
+ int level;
+
+ level = BTRFS_MAX_LEVEL - 2;
+ /*
+ * NOTE: these calculations are absolutely the worst possible case.
+ * This assumes that _every_ item we insert will require a new leaf, and
+ * that the tree has grown to its maximum level size.
+ */
+
+ /*
+ * for every item we insert we could insert both an extent item and a
+ * extent ref item. Then for ever item we insert, we will need to cow
+ * both the original leaf, plus the leaf to the left and right of it.
+ *
+ * Unless we are talking about the extent root, then we just want the
+ * number of items * 2, since we just need the extent item plus its ref.
+ */
+ if (root == root->fs_info->extent_root)
+ num_bytes = num_items * 2;
+ else
+ num_bytes = (num_items + (2 * num_items)) * 3;
+
+ /*
+ * num_bytes is total number of leaves we could need times the leaf
+ * size, and then for every leaf we could end up cow'ing 2 nodes per
+ * level, down to the leaf level.
+ */
+ num_bytes = (num_bytes * root->leafsize) +
+ (num_bytes * (level * 2)) * root->nodesize;
+
+ return num_bytes;
+}
+
/*
- * for now this just makes sure we have at least 5% of our metadata space free
- * for use.
+ * Unreserve metadata space for delalloc. If we have less reserved credits than
+ * we have extents, this function does nothing.
*/
-int btrfs_check_metadata_free_space(struct btrfs_root *root)
+int btrfs_unreserve_metadata_for_delalloc(struct btrfs_root *root,
+ struct inode *inode, int num_items)
{
struct btrfs_fs_info *info = root->fs_info;
struct btrfs_space_info *meta_sinfo;
- u64 alloc_target, thresh;
- int committed = 0, ret;
+ u64 num_bytes;
+ u64 alloc_target;
+ bool bug = false;
/* get the space info for where the metadata will live */
alloc_target = btrfs_get_alloc_profile(root, 0);
meta_sinfo = __find_space_info(info, alloc_target);
-again:
- spin_lock(&meta_sinfo->lock);
- if (!meta_sinfo->full)
- thresh = meta_sinfo->total_bytes * 80;
- else
- thresh = meta_sinfo->total_bytes * 95;
-
- do_div(thresh, 100);
-
- if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
- meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly > thresh) {
- struct btrfs_trans_handle *trans;
- if (!meta_sinfo->full) {
- meta_sinfo->force_alloc = 1;
- spin_unlock(&meta_sinfo->lock);
-
- trans = btrfs_start_transaction(root, 1);
- if (!trans)
- return -ENOMEM;
+ num_bytes = calculate_bytes_needed(root->fs_info->extent_root,
+ num_items);
- ret = do_chunk_alloc(trans, root->fs_info->extent_root,
- 2 * 1024 * 1024, alloc_target, 0);
- btrfs_end_transaction(trans, root);
- goto again;
- }
+ spin_lock(&meta_sinfo->lock);
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ if (BTRFS_I(inode)->reserved_extents <=
+ BTRFS_I(inode)->outstanding_extents) {
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
spin_unlock(&meta_sinfo->lock);
+ return 0;
+ }
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
- if (!committed) {
- committed = 1;
- trans = btrfs_join_transaction(root, 1);
- if (!trans)
- return -ENOMEM;
- ret = btrfs_commit_transaction(trans, root);
- if (ret)
- return ret;
- goto again;
- }
- return -ENOSPC;
+ BTRFS_I(inode)->reserved_extents--;
+ BUG_ON(BTRFS_I(inode)->reserved_extents < 0);
+
+ if (meta_sinfo->bytes_delalloc < num_bytes) {
+ bug = true;
+ meta_sinfo->bytes_delalloc = 0;
+ } else {
+ meta_sinfo->bytes_delalloc -= num_bytes;
}
spin_unlock(&meta_sinfo->lock);
+ BUG_ON(bug);
+
return 0;
}
-/*
- * This will check the space that the inode allocates from to make sure we have
- * enough space for bytes.
- */
-int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
- u64 bytes)
+static void check_force_delalloc(struct btrfs_space_info *meta_sinfo)
{
- struct btrfs_space_info *data_sinfo;
- int ret = 0, committed = 0;
-
- /* make sure bytes are sectorsize aligned */
- bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+ u64 thresh;
- data_sinfo = BTRFS_I(inode)->space_info;
-again:
- /* make sure we have enough space to handle the data first */
- spin_lock(&data_sinfo->lock);
- if (data_sinfo->total_bytes - data_sinfo->bytes_used -
- data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
- data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
- data_sinfo->bytes_may_use < bytes) {
- struct btrfs_trans_handle *trans;
+ thresh = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+ meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+ meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+ meta_sinfo->bytes_may_use;
- /*
- * if we don't have enough free bytes in this space then we need
- * to alloc a new chunk.
- */
- if (!data_sinfo->full) {
- u64 alloc_target;
+ thresh = meta_sinfo->total_bytes - thresh;
+ thresh *= 80;
+ do_div(thresh, 100);
+ if (thresh <= meta_sinfo->bytes_delalloc)
+ meta_sinfo->force_delalloc = 1;
+ else
+ meta_sinfo->force_delalloc = 0;
+}
- data_sinfo->force_alloc = 1;
- spin_unlock(&data_sinfo->lock);
+struct async_flush {
+ struct btrfs_root *root;
+ struct btrfs_space_info *info;
+ struct btrfs_work work;
+};
- alloc_target = btrfs_get_alloc_profile(root, 1);
- trans = btrfs_start_transaction(root, 1);
- if (!trans)
- return -ENOMEM;
+static noinline void flush_delalloc_async(struct btrfs_work *work)
+{
+ struct async_flush *async;
+ struct btrfs_root *root;
+ struct btrfs_space_info *info;
- ret = do_chunk_alloc(trans, root->fs_info->extent_root,
- bytes + 2 * 1024 * 1024,
- alloc_target, 0);
- btrfs_end_transaction(trans, root);
- if (ret)
- return ret;
- goto again;
- }
- spin_unlock(&data_sinfo->lock);
+ async = container_of(work, struct async_flush, work);
+ root = async->root;
+ info = async->info;
- /* commit the current transaction and try again */
- if (!committed) {
- committed = 1;
- trans = btrfs_join_transaction(root, 1);
- if (!trans)
- return -ENOMEM;
- ret = btrfs_commit_transaction(trans, root);
- if (ret)
- return ret;
- goto again;
- }
+ btrfs_start_delalloc_inodes(root);
+ wake_up(&info->flush_wait);
+ btrfs_wait_ordered_extents(root, 0);
- printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
- ", %llu bytes_used, %llu bytes_reserved, "
- "%llu bytes_pinned, %llu bytes_readonly, %llu may use "
- "%llu total\n", (unsigned long long)bytes,
- (unsigned long long)data_sinfo->bytes_delalloc,
- (unsigned long long)data_sinfo->bytes_used,
- (unsigned long long)data_sinfo->bytes_reserved,
- (unsigned long long)data_sinfo->bytes_pinned,
- (unsigned long long)data_sinfo->bytes_readonly,
- (unsigned long long)data_sinfo->bytes_may_use,
- (unsigned long long)data_sinfo->total_bytes);
- return -ENOSPC;
- }
- data_sinfo->bytes_may_use += bytes;
- BTRFS_I(inode)->reserved_bytes += bytes;
- spin_unlock(&data_sinfo->lock);
+ spin_lock(&info->lock);
+ info->flushing = 0;
+ spin_unlock(&info->lock);
+ wake_up(&info->flush_wait);
- return btrfs_check_metadata_free_space(root);
+ kfree(async);
}
-/*
- * if there was an error for whatever reason after calling
- * btrfs_check_data_free_space, call this so we can cleanup the counters.
- */
-void btrfs_free_reserved_data_space(struct btrfs_root *root,
- struct inode *inode, u64 bytes)
+static void wait_on_flush(struct btrfs_space_info *info)
{
- struct btrfs_space_info *data_sinfo;
+ DEFINE_WAIT(wait);
+ u64 used;
- /* make sure bytes are sectorsize aligned */
- bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+ while (1) {
+ prepare_to_wait(&info->flush_wait, &wait,
+ TASK_UNINTERRUPTIBLE);
+ spin_lock(&info->lock);
+ if (!info->flushing) {
+ spin_unlock(&info->lock);
+ break;
+ }
- data_sinfo = BTRFS_I(inode)->space_info;
- spin_lock(&data_sinfo->lock);
- data_sinfo->bytes_may_use -= bytes;
- BTRFS_I(inode)->reserved_bytes -= bytes;
- spin_unlock(&data_sinfo->lock);
+ used = info->bytes_used + info->bytes_reserved +
+ info->bytes_pinned + info->bytes_readonly +
+ info->bytes_super + info->bytes_root +
+ info->bytes_may_use + info->bytes_delalloc;
+ if (used < info->total_bytes) {
+ spin_unlock(&info->lock);
+ break;
+ }
+ spin_unlock(&info->lock);
+ schedule();
+ }
+ finish_wait(&info->flush_wait, &wait);
}
-/* called when we are adding a delalloc extent to the inode's io_tree */
-void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
- u64 bytes)
+static void flush_delalloc(struct btrfs_root *root,
+ struct btrfs_space_info *info)
+{
+ struct async_flush *async;
+ bool wait = false;
+
+ spin_lock(&info->lock);
+
+ if (!info->flushing) {
+ info->flushing = 1;
+ init_waitqueue_head(&info->flush_wait);
+ } else {
+ wait = true;
+ }
+
+ spin_unlock(&info->lock);
+
+ if (wait) {
+ wait_on_flush(info);
+ return;
+ }
+
+ async = kzalloc(sizeof(*async), GFP_NOFS);
+ if (!async)
+ goto flush;
+
+ async->root = root;
+ async->info = info;
+ async->work.func = flush_delalloc_async;
+
+ btrfs_queue_worker(&root->fs_info->enospc_workers,
+ &async->work);
+ wait_on_flush(info);
+ return;
+
+flush:
+ btrfs_start_delalloc_inodes(root);
+ btrfs_wait_ordered_extents(root, 0);
+
+ spin_lock(&info->lock);
+ info->flushing = 0;
+ spin_unlock(&info->lock);
+ wake_up(&info->flush_wait);
+}
+
+static int maybe_allocate_chunk(struct btrfs_root *root,
+ struct btrfs_space_info *info)
+{
+ struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
+ struct btrfs_trans_handle *trans;
+ bool wait = false;
+ int ret = 0;
+ u64 min_metadata;
+ u64 free_space;
+
+ free_space = btrfs_super_total_bytes(disk_super);
+ /*
+ * we allow the metadata to grow to a max of either 5gb or 5% of the
+ * space in the volume.
+ */
+ min_metadata = min((u64)5 * 1024 * 1024 * 1024,
+ div64_u64(free_space * 5, 100));
+ if (info->total_bytes >= min_metadata) {
+ spin_unlock(&info->lock);
+ return 0;
+ }
+
+ if (info->full) {
+ spin_unlock(&info->lock);
+ return 0;
+ }
+
+ if (!info->allocating_chunk) {
+ info->force_alloc = 1;
+ info->allocating_chunk = 1;
+ init_waitqueue_head(&info->allocate_wait);
+ } else {
+ wait = true;
+ }
+
+ spin_unlock(&info->lock);
+
+ if (wait) {
+ wait_event(info->allocate_wait,
+ !info->allocating_chunk);
+ return 1;
+ }
+
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+ 4096 + 2 * 1024 * 1024,
+ info->flags, 0);
+ btrfs_end_transaction(trans, root);
+ if (ret)
+ goto out;
+out:
+ spin_lock(&info->lock);
+ info->allocating_chunk = 0;
+ spin_unlock(&info->lock);
+ wake_up(&info->allocate_wait);
+
+ if (ret)
+ return 0;
+ return 1;
+}
+
+/*
+ * Reserve metadata space for delalloc.
+ */
+int btrfs_reserve_metadata_for_delalloc(struct btrfs_root *root,
+ struct inode *inode, int num_items)
+{
+ struct btrfs_fs_info *info = root->fs_info;
+ struct btrfs_space_info *meta_sinfo;
+ u64 num_bytes;
+ u64 used;
+ u64 alloc_target;
+ int flushed = 0;
+ int force_delalloc;
+
+ /* get the space info for where the metadata will live */
+ alloc_target = btrfs_get_alloc_profile(root, 0);
+ meta_sinfo = __find_space_info(info, alloc_target);
+
+ num_bytes = calculate_bytes_needed(root->fs_info->extent_root,
+ num_items);
+again:
+ spin_lock(&meta_sinfo->lock);
+
+ force_delalloc = meta_sinfo->force_delalloc;
+
+ if (unlikely(!meta_sinfo->bytes_root))
+ meta_sinfo->bytes_root = calculate_bytes_needed(root, 6);
+
+ if (!flushed)
+ meta_sinfo->bytes_delalloc += num_bytes;
+
+ used = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+ meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+ meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+ meta_sinfo->bytes_may_use + meta_sinfo->bytes_delalloc;
+
+ if (used > meta_sinfo->total_bytes) {
+ flushed++;
+
+ if (flushed == 1) {
+ if (maybe_allocate_chunk(root, meta_sinfo))
+ goto again;
+ flushed++;
+ } else {
+ spin_unlock(&meta_sinfo->lock);
+ }
+
+ if (flushed == 2) {
+ filemap_flush(inode->i_mapping);
+ goto again;
+ } else if (flushed == 3) {
+ flush_delalloc(root, meta_sinfo);
+ goto again;
+ }
+ spin_lock(&meta_sinfo->lock);
+ meta_sinfo->bytes_delalloc -= num_bytes;
+ spin_unlock(&meta_sinfo->lock);
+ printk(KERN_ERR "enospc, has %d, reserved %d\n",
+ BTRFS_I(inode)->outstanding_extents,
+ BTRFS_I(inode)->reserved_extents);
+ dump_space_info(meta_sinfo, 0, 0);
+ return -ENOSPC;
+ }
+
+ BTRFS_I(inode)->reserved_extents++;
+ check_force_delalloc(meta_sinfo);
+ spin_unlock(&meta_sinfo->lock);
+
+ if (!flushed && force_delalloc)
+ filemap_flush(inode->i_mapping);
+
+ return 0;
+}
+
+/*
+ * unreserve num_items number of items worth of metadata space. This needs to
+ * be paired with btrfs_reserve_metadata_space.
+ *
+ * NOTE: if you have the option, run this _AFTER_ you do a
+ * btrfs_end_transaction, since btrfs_end_transaction will run delayed ref
+ * oprations which will result in more used metadata, so we want to make sure we
+ * can do that without issue.
+ */
+int btrfs_unreserve_metadata_space(struct btrfs_root *root, int num_items)
+{
+ struct btrfs_fs_info *info = root->fs_info;
+ struct btrfs_space_info *meta_sinfo;
+ u64 num_bytes;
+ u64 alloc_target;
+ bool bug = false;
+
+ /* get the space info for where the metadata will live */
+ alloc_target = btrfs_get_alloc_profile(root, 0);
+ meta_sinfo = __find_space_info(info, alloc_target);
+
+ num_bytes = calculate_bytes_needed(root, num_items);
+
+ spin_lock(&meta_sinfo->lock);
+ if (meta_sinfo->bytes_may_use < num_bytes) {
+ bug = true;
+ meta_sinfo->bytes_may_use = 0;
+ } else {
+ meta_sinfo->bytes_may_use -= num_bytes;
+ }
+ spin_unlock(&meta_sinfo->lock);
+
+ BUG_ON(bug);
+
+ return 0;
+}
+
+/*
+ * Reserve some metadata space for use. We'll calculate the worste case number
+ * of bytes that would be needed to modify num_items number of items. If we
+ * have space, fantastic, if not, you get -ENOSPC. Please call
+ * btrfs_unreserve_metadata_space when you are done for the _SAME_ number of
+ * items you reserved, since whatever metadata you needed should have already
+ * been allocated.
+ *
+ * This will commit the transaction to make more space if we don't have enough
+ * metadata space. THe only time we don't do this is if we're reserving space
+ * inside of a transaction, then we will just return -ENOSPC and it is the
+ * callers responsibility to handle it properly.
+ */
+int btrfs_reserve_metadata_space(struct btrfs_root *root, int num_items)
+{
+ struct btrfs_fs_info *info = root->fs_info;
+ struct btrfs_space_info *meta_sinfo;
+ u64 num_bytes;
+ u64 used;
+ u64 alloc_target;
+ int retries = 0;
+
+ /* get the space info for where the metadata will live */
+ alloc_target = btrfs_get_alloc_profile(root, 0);
+ meta_sinfo = __find_space_info(info, alloc_target);
+
+ num_bytes = calculate_bytes_needed(root, num_items);
+again:
+ spin_lock(&meta_sinfo->lock);
+
+ if (unlikely(!meta_sinfo->bytes_root))
+ meta_sinfo->bytes_root = calculate_bytes_needed(root, 6);
+
+ if (!retries)
+ meta_sinfo->bytes_may_use += num_bytes;
+
+ used = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+ meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+ meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+ meta_sinfo->bytes_may_use + meta_sinfo->bytes_delalloc;
+
+ if (used > meta_sinfo->total_bytes) {
+ retries++;
+ if (retries == 1) {
+ if (maybe_allocate_chunk(root, meta_sinfo))
+ goto again;
+ retries++;
+ } else {
+ spin_unlock(&meta_sinfo->lock);
+ }
+
+ if (retries == 2) {
+ flush_delalloc(root, meta_sinfo);
+ goto again;
+ }
+ spin_lock(&meta_sinfo->lock);
+ meta_sinfo->bytes_may_use -= num_bytes;
+ spin_unlock(&meta_sinfo->lock);
+
+ dump_space_info(meta_sinfo, 0, 0);
+ return -ENOSPC;
+ }
+
+ check_force_delalloc(meta_sinfo);
+ spin_unlock(&meta_sinfo->lock);
+
+ return 0;
+}
+
+/*
+ * This will check the space that the inode allocates from to make sure we have
+ * enough space for bytes.
+ */
+int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes)
+{
+ struct btrfs_space_info *data_sinfo;
+ int ret = 0, committed = 0;
+
+ /* make sure bytes are sectorsize aligned */
+ bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+
+ data_sinfo = BTRFS_I(inode)->space_info;
+ if (!data_sinfo)
+ goto alloc;
+
+again:
+ /* make sure we have enough space to handle the data first */
+ spin_lock(&data_sinfo->lock);
+ if (data_sinfo->total_bytes - data_sinfo->bytes_used -
+ data_sinfo->bytes_delalloc - data_sinfo->bytes_reserved -
+ data_sinfo->bytes_pinned - data_sinfo->bytes_readonly -
+ data_sinfo->bytes_may_use - data_sinfo->bytes_super < bytes) {
+ struct btrfs_trans_handle *trans;
+
+ /*
+ * if we don't have enough free bytes in this space then we need
+ * to alloc a new chunk.
+ */
+ if (!data_sinfo->full) {
+ u64 alloc_target;
+
+ data_sinfo->force_alloc = 1;
+ spin_unlock(&data_sinfo->lock);
+alloc:
+ alloc_target = btrfs_get_alloc_profile(root, 1);
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+
+ ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+ bytes + 2 * 1024 * 1024,
+ alloc_target, 0);
+ btrfs_end_transaction(trans, root);
+ if (ret)
+ return ret;
+
+ if (!data_sinfo) {
+ btrfs_set_inode_space_info(root, inode);
+ data_sinfo = BTRFS_I(inode)->space_info;
+ }
+ goto again;
+ }
+ spin_unlock(&data_sinfo->lock);
+
+ /* commit the current transaction and try again */
+ if (!committed && !root->fs_info->open_ioctl_trans) {
+ committed = 1;
+ trans = btrfs_join_transaction(root, 1);
+ if (!trans)
+ return -ENOMEM;
+ ret = btrfs_commit_transaction(trans, root);
+ if (ret)
+ return ret;
+ goto again;
+ }
+
+ printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
+ ", %llu bytes_used, %llu bytes_reserved, "
+ "%llu bytes_pinned, %llu bytes_readonly, %llu may use "
+ "%llu total\n", (unsigned long long)bytes,
+ (unsigned long long)data_sinfo->bytes_delalloc,
+ (unsigned long long)data_sinfo->bytes_used,
+ (unsigned long long)data_sinfo->bytes_reserved,
+ (unsigned long long)data_sinfo->bytes_pinned,
+ (unsigned long long)data_sinfo->bytes_readonly,
+ (unsigned long long)data_sinfo->bytes_may_use,
+ (unsigned long long)data_sinfo->total_bytes);
+ return -ENOSPC;
+ }
+ data_sinfo->bytes_may_use += bytes;
+ BTRFS_I(inode)->reserved_bytes += bytes;
+ spin_unlock(&data_sinfo->lock);
+
+ return 0;
+}
+
+/*
+ * if there was an error for whatever reason after calling
+ * btrfs_check_data_free_space, call this so we can cleanup the counters.
+ */
+void btrfs_free_reserved_data_space(struct btrfs_root *root,
+ struct inode *inode, u64 bytes)
+{
+ struct btrfs_space_info *data_sinfo;
+
+ /* make sure bytes are sectorsize aligned */
+ bytes = (bytes + root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
+
+ data_sinfo = BTRFS_I(inode)->space_info;
+ spin_lock(&data_sinfo->lock);
+ data_sinfo->bytes_may_use -= bytes;
+ BTRFS_I(inode)->reserved_bytes -= bytes;
+ spin_unlock(&data_sinfo->lock);
+}
+
+/* called when we are adding a delalloc extent to the inode's io_tree */
+void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
+ u64 bytes)
{
struct btrfs_space_info *data_sinfo;
BUG_ON(!space_info);
spin_lock(&space_info->lock);
- if (space_info->force_alloc) {
+ if (space_info->force_alloc)
force = 1;
- space_info->force_alloc = 0;
- }
if (space_info->full) {
spin_unlock(&space_info->lock);
goto out;
}
thresh = space_info->total_bytes - space_info->bytes_readonly;
- thresh = div_factor(thresh, 6);
+ thresh = div_factor(thresh, 8);
if (!force &&
(space_info->bytes_used + space_info->bytes_pinned +
space_info->bytes_reserved + alloc_bytes) < thresh) {
* we keep a reasonable number of metadata chunks allocated in the
* FS as well.
*/
- if (flags & BTRFS_BLOCK_GROUP_DATA) {
+ if (flags & BTRFS_BLOCK_GROUP_DATA && fs_info->metadata_ratio) {
fs_info->data_chunk_allocations++;
if (!(fs_info->data_chunk_allocations %
fs_info->metadata_ratio))
}
ret = btrfs_alloc_chunk(trans, extent_root, flags);
+ spin_lock(&space_info->lock);
if (ret)
space_info->full = 1;
+ space_info->force_alloc = 0;
+ spin_unlock(&space_info->lock);
out:
mutex_unlock(&extent_root->fs_info->chunk_mutex);
return ret;
num_bytes = min(total, cache->key.offset - byte_in_group);
if (alloc) {
old_val += num_bytes;
+ btrfs_set_block_group_used(&cache->item, old_val);
+ cache->reserved -= num_bytes;
cache->space_info->bytes_used += num_bytes;
+ cache->space_info->bytes_reserved -= num_bytes;
if (cache->ro)
cache->space_info->bytes_readonly -= num_bytes;
- btrfs_set_block_group_used(&cache->item, old_val);
spin_unlock(&cache->lock);
spin_unlock(&cache->space_info->lock);
} else {
return bytenr;
}
-int btrfs_update_pinned_extents(struct btrfs_root *root,
- u64 bytenr, u64 num, int pin)
+/*
+ * this function must be called within transaction
+ */
+int btrfs_pin_extent(struct btrfs_root *root,
+ u64 bytenr, u64 num_bytes, int reserved)
{
- u64 len;
- struct btrfs_block_group_cache *cache;
struct btrfs_fs_info *fs_info = root->fs_info;
+ struct btrfs_block_group_cache *cache;
- if (pin)
- set_extent_dirty(&fs_info->pinned_extents,
- bytenr, bytenr + num - 1, GFP_NOFS);
-
- while (num > 0) {
- cache = btrfs_lookup_block_group(fs_info, bytenr);
- BUG_ON(!cache);
- len = min(num, cache->key.offset -
- (bytenr - cache->key.objectid));
- if (pin) {
- spin_lock(&cache->space_info->lock);
- spin_lock(&cache->lock);
- cache->pinned += len;
- cache->space_info->bytes_pinned += len;
- spin_unlock(&cache->lock);
- spin_unlock(&cache->space_info->lock);
- fs_info->total_pinned += len;
- } else {
- int unpin = 0;
+ cache = btrfs_lookup_block_group(fs_info, bytenr);
+ BUG_ON(!cache);
- /*
- * in order to not race with the block group caching, we
- * only want to unpin the extent if we are cached. If
- * we aren't cached, we want to start async caching this
- * block group so we can free the extent the next time
- * around.
- */
- spin_lock(&cache->space_info->lock);
- spin_lock(&cache->lock);
- unpin = (cache->cached == BTRFS_CACHE_FINISHED);
- if (likely(unpin)) {
- cache->pinned -= len;
- cache->space_info->bytes_pinned -= len;
- fs_info->total_pinned -= len;
- }
- spin_unlock(&cache->lock);
- spin_unlock(&cache->space_info->lock);
+ spin_lock(&cache->space_info->lock);
+ spin_lock(&cache->lock);
+ cache->pinned += num_bytes;
+ cache->space_info->bytes_pinned += num_bytes;
+ if (reserved) {
+ cache->reserved -= num_bytes;
+ cache->space_info->bytes_reserved -= num_bytes;
+ }
+ spin_unlock(&cache->lock);
+ spin_unlock(&cache->space_info->lock);
- if (likely(unpin))
- clear_extent_dirty(&fs_info->pinned_extents,
- bytenr, bytenr + len -1,
- GFP_NOFS);
- else
- cache_block_group(cache);
+ btrfs_put_block_group(cache);
- if (unpin)
- btrfs_add_free_space(cache, bytenr, len);
- }
- btrfs_put_block_group(cache);
- bytenr += len;
- num -= len;
+ set_extent_dirty(fs_info->pinned_extents,
+ bytenr, bytenr + num_bytes - 1, GFP_NOFS);
+ return 0;
+}
+
+static int update_reserved_extents(struct btrfs_block_group_cache *cache,
+ u64 num_bytes, int reserve)
+{
+ spin_lock(&cache->space_info->lock);
+ spin_lock(&cache->lock);
+ if (reserve) {
+ cache->reserved += num_bytes;
+ cache->space_info->bytes_reserved += num_bytes;
+ } else {
+ cache->reserved -= num_bytes;
+ cache->space_info->bytes_reserved -= num_bytes;
}
+ spin_unlock(&cache->lock);
+ spin_unlock(&cache->space_info->lock);
return 0;
}
-static int update_reserved_extents(struct btrfs_root *root,
- u64 bytenr, u64 num, int reserve)
+int btrfs_prepare_extent_commit(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root)
{
- u64 len;
- struct btrfs_block_group_cache *cache;
struct btrfs_fs_info *fs_info = root->fs_info;
+ struct btrfs_caching_control *next;
+ struct btrfs_caching_control *caching_ctl;
+ struct btrfs_block_group_cache *cache;
- while (num > 0) {
- cache = btrfs_lookup_block_group(fs_info, bytenr);
- BUG_ON(!cache);
- len = min(num, cache->key.offset -
- (bytenr - cache->key.objectid));
+ down_write(&fs_info->extent_commit_sem);
- spin_lock(&cache->space_info->lock);
- spin_lock(&cache->lock);
- if (reserve) {
- cache->reserved += len;
- cache->space_info->bytes_reserved += len;
+ list_for_each_entry_safe(caching_ctl, next,
+ &fs_info->caching_block_groups, list) {
+ cache = caching_ctl->block_group;
+ if (block_group_cache_done(cache)) {
+ cache->last_byte_to_unpin = (u64)-1;
+ list_del_init(&caching_ctl->list);
+ put_caching_control(caching_ctl);
} else {
- cache->reserved -= len;
- cache->space_info->bytes_reserved -= len;
+ cache->last_byte_to_unpin = caching_ctl->progress;
}
- spin_unlock(&cache->lock);
- spin_unlock(&cache->space_info->lock);
- btrfs_put_block_group(cache);
- bytenr += len;
- num -= len;
}
+
+ if (fs_info->pinned_extents == &fs_info->freed_extents[0])
+ fs_info->pinned_extents = &fs_info->freed_extents[1];
+ else
+ fs_info->pinned_extents = &fs_info->freed_extents[0];
+
+ up_write(&fs_info->extent_commit_sem);
return 0;
}
-int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy)
+static int unpin_extent_range(struct btrfs_root *root, u64 start, u64 end)
{
- u64 last = 0;
- u64 start;
- u64 end;
- struct extent_io_tree *pinned_extents = &root->fs_info->pinned_extents;
- int ret;
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ struct btrfs_block_group_cache *cache = NULL;
+ u64 len;
- while (1) {
- ret = find_first_extent_bit(pinned_extents, last,
- &start, &end, EXTENT_DIRTY);
- if (ret)
- break;
+ while (start <= end) {
+ if (!cache ||
+ start >= cache->key.objectid + cache->key.offset) {
+ if (cache)
+ btrfs_put_block_group(cache);
+ cache = btrfs_lookup_block_group(fs_info, start);
+ BUG_ON(!cache);
+ }
+
+ len = cache->key.objectid + cache->key.offset - start;
+ len = min(len, end + 1 - start);
+
+ if (start < cache->last_byte_to_unpin) {
+ len = min(len, cache->last_byte_to_unpin - start);
+ btrfs_add_free_space(cache, start, len);
+ }
+
+ spin_lock(&cache->space_info->lock);
+ spin_lock(&cache->lock);
+ cache->pinned -= len;
+ cache->space_info->bytes_pinned -= len;
+ spin_unlock(&cache->lock);
+ spin_unlock(&cache->space_info->lock);
- set_extent_dirty(copy, start, end, GFP_NOFS);
- last = end + 1;
+ start += len;
}
+
+ if (cache)
+ btrfs_put_block_group(cache);
return 0;
}
int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct extent_io_tree *unpin)
+ struct btrfs_root *root)
{
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ struct extent_io_tree *unpin;
u64 start;
u64 end;
int ret;
+ if (fs_info->pinned_extents == &fs_info->freed_extents[0])
+ unpin = &fs_info->freed_extents[1];
+ else
+ unpin = &fs_info->freed_extents[0];
+
while (1) {
ret = find_first_extent_bit(unpin, 0, &start, &end,
EXTENT_DIRTY);
ret = btrfs_discard_extent(root, start, end + 1 - start);
- /* unlocks the pinned mutex */
- btrfs_update_pinned_extents(root, start, end + 1 - start, 0);
clear_extent_dirty(unpin, start, end, GFP_NOFS);
-
+ unpin_extent_range(root, start, end);
cond_resched();
}
static int pin_down_bytes(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
- u64 bytenr, u64 num_bytes, int is_data,
+ u64 bytenr, u64 num_bytes,
+ int is_data, int reserved,
struct extent_buffer **must_clean)
{
int err = 0;
if (is_data)
goto pinit;
+ /*
+ * discard is sloooow, and so triggering discards on
+ * individual btree blocks isn't a good plan. Just
+ * pin everything in discard mode.
+ */
+ if (btrfs_test_opt(root, DISCARD))
+ goto pinit;
+
buf = btrfs_find_tree_block(root, bytenr, num_bytes);
if (!buf)
goto pinit;
}
free_extent_buffer(buf);
pinit:
- btrfs_set_path_blocking(path);
+ if (path)
+ btrfs_set_path_blocking(path);
/* unlocks the pinned mutex */
- btrfs_update_pinned_extents(root, bytenr, num_bytes, 1);
+ btrfs_pin_extent(root, bytenr, num_bytes, reserved);
BUG_ON(err < 0);
return 0;
}
-
static int __btrfs_free_extent(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 bytenr, u64 num_bytes, u64 parent,
}
ret = pin_down_bytes(trans, root, path, bytenr,
- num_bytes, is_data, &must_clean);
+ num_bytes, is_data, 0, &must_clean);
if (ret > 0)
mark_free = 1;
BUG_ON(ret < 0);
if (root_objectid == BTRFS_TREE_LOG_OBJECTID) {
WARN_ON(owner >= BTRFS_FIRST_FREE_OBJECTID);
/* unlocks the pinned mutex */
- btrfs_update_pinned_extents(root, bytenr, num_bytes, 1);
- update_reserved_extents(root, bytenr, num_bytes, 0);
+ btrfs_pin_extent(root, bytenr, num_bytes, 1);
ret = 0;
} else if (owner < BTRFS_FIRST_FREE_OBJECTID) {
ret = btrfs_add_delayed_tree_ref(trans, bytenr, num_bytes,
wait_block_group_cache_progress(struct btrfs_block_group_cache *cache,
u64 num_bytes)
{
+ struct btrfs_caching_control *caching_ctl;
DEFINE_WAIT(wait);
- prepare_to_wait(&cache->caching_q, &wait, TASK_UNINTERRUPTIBLE);
-
- if (block_group_cache_done(cache)) {
- finish_wait(&cache->caching_q, &wait);
+ caching_ctl = get_caching_control(cache);
+ if (!caching_ctl)
return 0;
- }
- schedule();
- finish_wait(&cache->caching_q, &wait);
- wait_event(cache->caching_q, block_group_cache_done(cache) ||
+ wait_event(caching_ctl->wait, block_group_cache_done(cache) ||
(cache->free_space >= num_bytes));
+
+ put_caching_control(caching_ctl);
+ return 0;
+}
+
+static noinline int
+wait_block_group_cache_done(struct btrfs_block_group_cache *cache)
+{
+ struct btrfs_caching_control *caching_ctl;
+ DEFINE_WAIT(wait);
+
+ caching_ctl = get_caching_control(cache);
+ if (!caching_ctl)
+ return 0;
+
+ wait_event(caching_ctl->wait, block_group_cache_done(cache));
+
+ put_caching_control(caching_ctl);
return 0;
}
int last_ptr_loop = 0;
int loop = 0;
bool found_uncached_bg = false;
+ bool failed_cluster_refill = false;
+ bool failed_alloc = false;
WARN_ON(num_bytes < root->sectorsize);
btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
if (unlikely(block_group->ro))
goto loop;
- if (last_ptr) {
+ /*
+ * Ok we want to try and use the cluster allocator, so lets look
+ * there, unless we are on LOOP_NO_EMPTY_SIZE, since we will
+ * have tried the cluster allocator plenty of times at this
+ * point and not have found anything, so we are likely way too
+ * fragmented for the clustering stuff to find anything, so lets
+ * just skip it and let the allocator find whatever block it can
+ * find
+ */
+ if (last_ptr && loop < LOOP_NO_EMPTY_SIZE) {
/*
* the refill lock keeps out other
* people trying to start a new cluster
spin_unlock(&last_ptr->refill_lock);
goto checks;
}
- } else if (!cached && loop > LOOP_CACHING_NOWAIT) {
+ } else if (!cached && loop > LOOP_CACHING_NOWAIT
+ && !failed_cluster_refill) {
spin_unlock(&last_ptr->refill_lock);
+ failed_cluster_refill = true;
wait_block_group_cache_progress(block_group,
num_bytes + empty_cluster + empty_size);
goto have_block_group;
* cluster. Free the cluster we've been trying
* to use, and go to the next block group
*/
- if (loop < LOOP_NO_EMPTY_SIZE) {
- btrfs_return_cluster_to_free_space(NULL,
- last_ptr);
- spin_unlock(&last_ptr->refill_lock);
- goto loop;
- }
+ btrfs_return_cluster_to_free_space(NULL, last_ptr);
spin_unlock(&last_ptr->refill_lock);
+ goto loop;
}
offset = btrfs_find_space_for_alloc(block_group, search_start,
num_bytes, empty_size);
- if (!offset && (cached || (!cached &&
- loop == LOOP_CACHING_NOWAIT))) {
- goto loop;
- } else if (!offset && (!cached &&
- loop > LOOP_CACHING_NOWAIT)) {
+ /*
+ * If we didn't find a chunk, and we haven't failed on this
+ * block group before, and this block group is in the middle of
+ * caching and we are ok with waiting, then go ahead and wait
+ * for progress to be made, and set failed_alloc to true.
+ *
+ * If failed_alloc is true then we've already waited on this
+ * block group once and should move on to the next block group.
+ */
+ if (!offset && !failed_alloc && !cached &&
+ loop > LOOP_CACHING_NOWAIT) {
wait_block_group_cache_progress(block_group,
- num_bytes + empty_size);
+ num_bytes + empty_size);
+ failed_alloc = true;
goto have_block_group;
+ } else if (!offset) {
+ goto loop;
}
checks:
search_start = stripe_align(root, offset);
search_start - offset);
BUG_ON(offset > search_start);
+ update_reserved_extents(block_group, num_bytes, 1);
+
/* we are all good, lets return */
break;
loop:
+ failed_cluster_refill = false;
+ failed_alloc = false;
btrfs_put_block_group(block_group);
}
up_read(&space_info->groups_sem);
return ret;
}
-static void dump_space_info(struct btrfs_space_info *info, u64 bytes)
+static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
+ int dump_block_groups)
{
struct btrfs_block_group_cache *cache;
+ spin_lock(&info->lock);
printk(KERN_INFO "space_info has %llu free, is %sfull\n",
(unsigned long long)(info->total_bytes - info->bytes_used -
- info->bytes_pinned - info->bytes_reserved),
+ info->bytes_pinned - info->bytes_reserved -
+ info->bytes_super),
(info->full) ? "" : "not ");
printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
- " may_use=%llu, used=%llu\n",
+ " may_use=%llu, used=%llu, root=%llu, super=%llu, reserved=%llu"
+ "\n",
(unsigned long long)info->total_bytes,
(unsigned long long)info->bytes_pinned,
(unsigned long long)info->bytes_delalloc,
(unsigned long long)info->bytes_may_use,
- (unsigned long long)info->bytes_used);
+ (unsigned long long)info->bytes_used,
+ (unsigned long long)info->bytes_root,
+ (unsigned long long)info->bytes_super,
+ (unsigned long long)info->bytes_reserved);
+ spin_unlock(&info->lock);
+
+ if (!dump_block_groups)
+ return;
down_read(&info->groups_sem);
list_for_each_entry(cache, &info->block_groups, list) {
up_read(&info->groups_sem);
}
-static int __btrfs_reserve_extent(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 num_bytes, u64 min_alloc_size,
- u64 empty_size, u64 hint_byte,
- u64 search_end, struct btrfs_key *ins,
- u64 data)
+int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ u64 num_bytes, u64 min_alloc_size,
+ u64 empty_size, u64 hint_byte,
+ u64 search_end, struct btrfs_key *ins,
+ u64 data)
{
int ret;
u64 search_start = 0;
printk(KERN_ERR "btrfs allocation failed flags %llu, "
"wanted %llu\n", (unsigned long long)data,
(unsigned long long)num_bytes);
- dump_space_info(sinfo, num_bytes);
+ dump_space_info(sinfo, num_bytes, 1);
}
return ret;
return -ENOSPC;
}
- ret = btrfs_discard_extent(root, start, len);
-
- btrfs_add_free_space(cache, start, len);
- btrfs_put_block_group(cache);
- update_reserved_extents(root, start, len, 0);
-
- return ret;
-}
-
-int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 num_bytes, u64 min_alloc_size,
- u64 empty_size, u64 hint_byte,
- u64 search_end, struct btrfs_key *ins,
- u64 data)
-{
- int ret;
- ret = __btrfs_reserve_extent(trans, root, num_bytes, min_alloc_size,
- empty_size, hint_byte, search_end, ins,
- data);
- if (!ret)
- update_reserved_extents(root, ins->objectid, ins->offset, 1);
-
+ ret = btrfs_discard_extent(root, start, len);
+
+ btrfs_add_free_space(cache, start, len);
+ update_reserved_extents(cache, len, 0);
+ btrfs_put_block_group(cache);
+
return ret;
}
{
int ret;
struct btrfs_block_group_cache *block_group;
+ struct btrfs_caching_control *caching_ctl;
+ u64 start = ins->objectid;
+ u64 num_bytes = ins->offset;
block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
cache_block_group(block_group);
- wait_event(block_group->caching_q,
- block_group_cache_done(block_group));
+ caching_ctl = get_caching_control(block_group);
- ret = btrfs_remove_free_space(block_group, ins->objectid,
- ins->offset);
- BUG_ON(ret);
+ if (!caching_ctl) {
+ BUG_ON(!block_group_cache_done(block_group));
+ ret = btrfs_remove_free_space(block_group, start, num_bytes);
+ BUG_ON(ret);
+ } else {
+ mutex_lock(&caching_ctl->mutex);
+
+ if (start >= caching_ctl->progress) {
+ ret = add_excluded_extent(root, start, num_bytes);
+ BUG_ON(ret);
+ } else if (start + num_bytes <= caching_ctl->progress) {
+ ret = btrfs_remove_free_space(block_group,
+ start, num_bytes);
+ BUG_ON(ret);
+ } else {
+ num_bytes = caching_ctl->progress - start;
+ ret = btrfs_remove_free_space(block_group,
+ start, num_bytes);
+ BUG_ON(ret);
+
+ start = caching_ctl->progress;
+ num_bytes = ins->objectid + ins->offset -
+ caching_ctl->progress;
+ ret = add_excluded_extent(root, start, num_bytes);
+ BUG_ON(ret);
+ }
+
+ mutex_unlock(&caching_ctl->mutex);
+ put_caching_control(caching_ctl);
+ }
+
+ update_reserved_extents(block_group, ins->offset, 1);
btrfs_put_block_group(block_group);
ret = alloc_reserved_file_extent(trans, root, 0, root_objectid,
0, owner, offset, ins, 1);
int ret;
u64 flags = 0;
- ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
- empty_size, hint_byte, search_end,
- ins, 0);
+ ret = btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
+ empty_size, hint_byte, search_end,
+ ins, 0);
if (ret)
return ret;
} else
BUG_ON(parent > 0);
- update_reserved_extents(root, ins->objectid, ins->offset, 1);
if (root_objectid != BTRFS_TREE_LOG_OBJECTID) {
struct btrfs_delayed_extent_op *extent_op;
extent_op = kmalloc(sizeof(*extent_op), GFP_NOFS);
return buf;
}
-#if 0
-int btrfs_drop_leaf_ref(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, struct extent_buffer *leaf)
-{
- u64 disk_bytenr;
- u64 num_bytes;
- struct btrfs_key key;
- struct btrfs_file_extent_item *fi;
- u32 nritems;
- int i;
- int ret;
-
- BUG_ON(!btrfs_is_leaf(leaf));
- nritems = btrfs_header_nritems(leaf);
-
- for (i = 0; i < nritems; i++) {
- cond_resched();
- btrfs_item_key_to_cpu(leaf, &key, i);
-
- /* only extents have references, skip everything else */
- if (btrfs_key_type(&key) != BTRFS_EXTENT_DATA_KEY)
- continue;
-
- fi = btrfs_item_ptr(leaf, i, struct btrfs_file_extent_item);
-
- /* inline extents live in the btree, they don't have refs */
- if (btrfs_file_extent_type(leaf, fi) ==
- BTRFS_FILE_EXTENT_INLINE)
- continue;
-
- disk_bytenr = btrfs_file_extent_disk_bytenr(leaf, fi);
-
- /* holes don't have refs */
- if (disk_bytenr == 0)
- continue;
-
- num_bytes = btrfs_file_extent_disk_num_bytes(leaf, fi);
- ret = btrfs_free_extent(trans, root, disk_bytenr, num_bytes,
- leaf->start, 0, key.objectid, 0);
- BUG_ON(ret);
- }
- return 0;
-}
-
-static noinline int cache_drop_leaf_ref(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_leaf_ref *ref)
-{
- int i;
- int ret;
- struct btrfs_extent_info *info;
- struct refsort *sorted;
-
- if (ref->nritems == 0)
- return 0;
-
- sorted = kmalloc(sizeof(*sorted) * ref->nritems, GFP_NOFS);
- for (i = 0; i < ref->nritems; i++) {
- sorted[i].bytenr = ref->extents[i].bytenr;
- sorted[i].slot = i;
- }
- sort(sorted, ref->nritems, sizeof(struct refsort), refsort_cmp, NULL);
-
- /*
- * the items in the ref were sorted when the ref was inserted
- * into the ref cache, so this is already in order
- */
- for (i = 0; i < ref->nritems; i++) {
- info = ref->extents + sorted[i].slot;
- ret = btrfs_free_extent(trans, root, info->bytenr,
- info->num_bytes, ref->bytenr,
- ref->owner, ref->generation,
- info->objectid, 0);
-
- atomic_inc(&root->fs_info->throttle_gen);
- wake_up(&root->fs_info->transaction_throttle);
- cond_resched();
-
- BUG_ON(ret);
- info++;
- }
-
- kfree(sorted);
- return 0;
-}
-
-
-static int drop_snap_lookup_refcount(struct btrfs_trans_handle *trans,
- struct btrfs_root *root, u64 start,
- u64 len, u32 *refs)
-{
- int ret;
-
- ret = btrfs_lookup_extent_refs(trans, root, start, len, refs);
- BUG_ON(ret);
-
-#if 0 /* some debugging code in case we see problems here */
- /* if the refs count is one, it won't get increased again. But
- * if the ref count is > 1, someone may be decreasing it at
- * the same time we are.
- */
- if (*refs != 1) {
- struct extent_buffer *eb = NULL;
- eb = btrfs_find_create_tree_block(root, start, len);
- if (eb)
- btrfs_tree_lock(eb);
-
- mutex_lock(&root->fs_info->alloc_mutex);
- ret = lookup_extent_ref(NULL, root, start, len, refs);
- BUG_ON(ret);
- mutex_unlock(&root->fs_info->alloc_mutex);
-
- if (eb) {
- btrfs_tree_unlock(eb);
- free_extent_buffer(eb);
- }
- if (*refs == 1) {
- printk(KERN_ERR "btrfs block %llu went down to one "
- "during drop_snap\n", (unsigned long long)start);
- }
-
- }
-#endif
-
- cond_resched();
- return ret;
-}
+struct walk_control {
+ u64 refs[BTRFS_MAX_LEVEL];
+ u64 flags[BTRFS_MAX_LEVEL];
+ struct btrfs_key update_progress;
+ int stage;
+ int level;
+ int shared_level;
+ int update_ref;
+ int keep_locks;
+ int reada_slot;
+ int reada_count;
+};
+#define DROP_REFERENCE 1
+#define UPDATE_BACKREF 2
-/*
- * this is used while deleting old snapshots, and it drops the refs
- * on a whole subtree starting from a level 1 node.
- *
- * The idea is to sort all the leaf pointers, and then drop the
- * ref on all the leaves in order. Most of the time the leaves
- * will have ref cache entries, so no leaf IOs will be required to
- * find the extents they have references on.
- *
- * For each leaf, any references it has are also dropped in order
- *
- * This ends up dropping the references in something close to optimal
- * order for reading and modifying the extent allocation tree.
- */
-static noinline int drop_level_one_refs(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_path *path)
+static noinline void reada_walk_down(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct walk_control *wc,
+ struct btrfs_path *path)
{
u64 bytenr;
- u64 root_owner;
- u64 root_gen;
- struct extent_buffer *eb = path->nodes[1];
- struct extent_buffer *leaf;
- struct btrfs_leaf_ref *ref;
- struct refsort *sorted = NULL;
- int nritems = btrfs_header_nritems(eb);
+ u64 generation;
+ u64 refs;
+ u64 flags;
+ u64 last = 0;
+ u32 nritems;
+ u32 blocksize;
+ struct btrfs_key key;
+ struct extent_buffer *eb;
int ret;
- int i;
- int refi = 0;
- int slot = path->slots[1];
- u32 blocksize = btrfs_level_size(root, 0);
- u32 refs;
-
- if (nritems == 0)
- goto out;
-
- root_owner = btrfs_header_owner(eb);
- root_gen = btrfs_header_generation(eb);
- sorted = kmalloc(sizeof(*sorted) * nritems, GFP_NOFS);
+ int slot;
+ int nread = 0;
- /*
- * step one, sort all the leaf pointers so we don't scribble
- * randomly into the extent allocation tree
- */
- for (i = slot; i < nritems; i++) {
- sorted[refi].bytenr = btrfs_node_blockptr(eb, i);
- sorted[refi].slot = i;
- refi++;
+ if (path->slots[wc->level] < wc->reada_slot) {
+ wc->reada_count = wc->reada_count * 2 / 3;
+ wc->reada_count = max(wc->reada_count, 2);
+ } else {
+ wc->reada_count = wc->reada_count * 3 / 2;
+ wc->reada_count = min_t(int, wc->reada_count,
+ BTRFS_NODEPTRS_PER_BLOCK(root));
}
- /*
- * nritems won't be zero, but if we're picking up drop_snapshot
- * after a crash, slot might be > 0, so double check things
- * just in case.
- */
- if (refi == 0)
- goto out;
+ eb = path->nodes[wc->level];
+ nritems = btrfs_header_nritems(eb);
+ blocksize = btrfs_level_size(root, wc->level - 1);
- sort(sorted, refi, sizeof(struct refsort), refsort_cmp, NULL);
+ for (slot = path->slots[wc->level]; slot < nritems; slot++) {
+ if (nread >= wc->reada_count)
+ break;
- /*
- * the first loop frees everything the leaves point to
- */
- for (i = 0; i < refi; i++) {
- u64 ptr_gen;
+ cond_resched();
+ bytenr = btrfs_node_blockptr(eb, slot);
+ generation = btrfs_node_ptr_generation(eb, slot);
- bytenr = sorted[i].bytenr;
+ if (slot == path->slots[wc->level])
+ goto reada;
- /*
- * check the reference count on this leaf. If it is > 1
- * we just decrement it below and don't update any
- * of the refs the leaf points to.
- */
- ret = drop_snap_lookup_refcount(trans, root, bytenr,
- blocksize, &refs);
- BUG_ON(ret);
- if (refs != 1)
+ if (wc->stage == UPDATE_BACKREF &&
+ generation <= root->root_key.offset)
continue;
- ptr_gen = btrfs_node_ptr_generation(eb, sorted[i].slot);
-
- /*
- * the leaf only had one reference, which means the
- * only thing pointing to this leaf is the snapshot
- * we're deleting. It isn't possible for the reference
- * count to increase again later
- *
- * The reference cache is checked for the leaf,
- * and if found we'll be able to drop any refs held by
- * the leaf without needing to read it in.
- */
- ref = btrfs_lookup_leaf_ref(root, bytenr);
- if (ref && ref->generation != ptr_gen) {
- btrfs_free_leaf_ref(root, ref);
- ref = NULL;
- }
- if (ref) {
- ret = cache_drop_leaf_ref(trans, root, ref);
- BUG_ON(ret);
- btrfs_remove_leaf_ref(root, ref);
- btrfs_free_leaf_ref(root, ref);
- } else {
- /*
- * the leaf wasn't in the reference cache, so
- * we have to read it.
- */
- leaf = read_tree_block(root, bytenr, blocksize,
- ptr_gen);
- ret = btrfs_drop_leaf_ref(trans, root, leaf);
- BUG_ON(ret);
- free_extent_buffer(leaf);
- }
- atomic_inc(&root->fs_info->throttle_gen);
- wake_up(&root->fs_info->transaction_throttle);
- cond_resched();
- }
-
- /*
- * run through the loop again to free the refs on the leaves.
- * This is faster than doing it in the loop above because
- * the leaves are likely to be clustered together. We end up
- * working in nice chunks on the extent allocation tree.
- */
- for (i = 0; i < refi; i++) {
- bytenr = sorted[i].bytenr;
- ret = btrfs_free_extent(trans, root, bytenr,
- blocksize, eb->start,
- root_owner, root_gen, 0, 1);
+ /* We don't lock the tree block, it's OK to be racy here */
+ ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
+ &refs, &flags);
BUG_ON(ret);
+ BUG_ON(refs == 0);
- atomic_inc(&root->fs_info->throttle_gen);
- wake_up(&root->fs_info->transaction_throttle);
- cond_resched();
- }
-out:
- kfree(sorted);
-
- /*
- * update the path to show we've processed the entire level 1
- * node. This will get saved into the root's drop_snapshot_progress
- * field so these drops are not repeated again if this transaction
- * commits.
- */
- path->slots[1] = nritems;
- return 0;
-}
-
-/*
- * helper function for drop_snapshot, this walks down the tree dropping ref
- * counts as it goes.
- */
-static noinline int walk_down_tree(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- struct btrfs_path *path, int *level)
-{
- u64 root_owner;
- u64 root_gen;
- u64 bytenr;
- u64 ptr_gen;
- struct extent_buffer *next;
- struct extent_buffer *cur;
- struct extent_buffer *parent;
- u32 blocksize;
- int ret;
- u32 refs;
-
- WARN_ON(*level < 0);
- WARN_ON(*level >= BTRFS_MAX_LEVEL);
- ret = drop_snap_lookup_refcount(trans, root, path->nodes[*level]->start,
- path->nodes[*level]->len, &refs);
- BUG_ON(ret);
- if (refs > 1)
- goto out;
-
- /*
- * walk down to the last node level and free all the leaves
- */
- while (*level >= 0) {
- WARN_ON(*level < 0);
- WARN_ON(*level >= BTRFS_MAX_LEVEL);
- cur = path->nodes[*level];
-
- if (btrfs_header_level(cur) != *level)
- WARN_ON(1);
-
- if (path->slots[*level] >=
- btrfs_header_nritems(cur))
- break;
+ if (wc->stage == DROP_REFERENCE) {
+ if (refs == 1)
+ goto reada;
- /* the new code goes down to level 1 and does all the
- * leaves pointed to that node in bulk. So, this check
- * for level 0 will always be false.
- *
- * But, the disk format allows the drop_snapshot_progress
- * field in the root to leave things in a state where
- * a leaf will need cleaning up here. If someone crashes
- * with the old code and then boots with the new code,
- * we might find a leaf here.
- */
- if (*level == 0) {
- ret = btrfs_drop_leaf_ref(trans, root, cur);
- BUG_ON(ret);
- break;
+ if (wc->level == 1 &&
+ (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+ continue;
+ if (!wc->update_ref ||
+ generation <= root->root_key.offset)
+ continue;
+ btrfs_node_key_to_cpu(eb, &key, slot);
+ ret = btrfs_comp_cpu_keys(&key,
+ &wc->update_progress);
+ if (ret < 0)
+ continue;
+ } else {
+ if (wc->level == 1 &&
+ (flags & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+ continue;
}
-
- /*
- * once we get to level one, process the whole node
- * at once, including everything below it.
- */
- if (*level == 1) {
- ret = drop_level_one_refs(trans, root, path);
- BUG_ON(ret);
+reada:
+ ret = readahead_tree_block(root, bytenr, blocksize,
+ generation);
+ if (ret)
break;
- }
-
- bytenr = btrfs_node_blockptr(cur, path->slots[*level]);
- ptr_gen = btrfs_node_ptr_generation(cur, path->slots[*level]);
- blocksize = btrfs_level_size(root, *level - 1);
-
- ret = drop_snap_lookup_refcount(trans, root, bytenr,
- blocksize, &refs);
- BUG_ON(ret);
-
- /*
- * if there is more than one reference, we don't need
- * to read that node to drop any references it has. We
- * just drop the ref we hold on that node and move on to the
- * next slot in this level.
- */
- if (refs != 1) {
- parent = path->nodes[*level];
- root_owner = btrfs_header_owner(parent);
- root_gen = btrfs_header_generation(parent);
- path->slots[*level]++;
-
- ret = btrfs_free_extent(trans, root, bytenr,
- blocksize, parent->start,
- root_owner, root_gen,
- *level - 1, 1);
- BUG_ON(ret);
-
- atomic_inc(&root->fs_info->throttle_gen);
- wake_up(&root->fs_info->transaction_throttle);
- cond_resched();
-
- continue;
- }
-
- /*
- * we need to keep freeing things in the next level down.
- * read the block and loop around to process it
- */
- next = read_tree_block(root, bytenr, blocksize, ptr_gen);
- WARN_ON(*level <= 0);
- if (path->nodes[*level-1])
- free_extent_buffer(path->nodes[*level-1]);
- path->nodes[*level-1] = next;
- *level = btrfs_header_level(next);
- path->slots[*level] = 0;
- cond_resched();
+ last = bytenr + blocksize;
+ nread++;
}
-out:
- WARN_ON(*level < 0);
- WARN_ON(*level >= BTRFS_MAX_LEVEL);
-
- if (path->nodes[*level] == root->node) {
- parent = path->nodes[*level];
- bytenr = path->nodes[*level]->start;
- } else {
- parent = path->nodes[*level + 1];
- bytenr = btrfs_node_blockptr(parent, path->slots[*level + 1]);
- }
-
- blocksize = btrfs_level_size(root, *level);
- root_owner = btrfs_header_owner(parent);
- root_gen = btrfs_header_generation(parent);
-
- /*
- * cleanup and free the reference on the last node
- * we processed
- */
- ret = btrfs_free_extent(trans, root, bytenr, blocksize,
- parent->start, root_owner, root_gen,
- *level, 1);
- free_extent_buffer(path->nodes[*level]);
- path->nodes[*level] = NULL;
-
- *level += 1;
- BUG_ON(ret);
-
- cond_resched();
- return 0;
+ wc->reada_slot = slot;
}
-#endif
-
-struct walk_control {
- u64 refs[BTRFS_MAX_LEVEL];
- u64 flags[BTRFS_MAX_LEVEL];
- struct btrfs_key update_progress;
- int stage;
- int level;
- int shared_level;
- int update_ref;
- int keep_locks;
-};
-
-#define DROP_REFERENCE 1
-#define UPDATE_BACKREF 2
/*
* hepler to process tree block while walking down the tree.
*
- * when wc->stage == DROP_REFERENCE, this function checks
- * reference count of the block. if the block is shared and
- * we need update back refs for the subtree rooted at the
- * block, this function changes wc->stage to UPDATE_BACKREF
- *
* when wc->stage == UPDATE_BACKREF, this function updates
* back refs for pointers in the block.
*
static noinline int walk_down_proc(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct btrfs_path *path,
- struct walk_control *wc)
+ struct walk_control *wc, int lookup_info)
{
int level = wc->level;
struct extent_buffer *eb = path->nodes[level];
- struct btrfs_key key;
u64 flag = BTRFS_BLOCK_FLAG_FULL_BACKREF;
int ret;
* when reference count of tree block is 1, it won't increase
* again. once full backref flag is set, we never clear it.
*/
- if ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) ||
- (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag))) {
+ if (lookup_info &&
+ ((wc->stage == DROP_REFERENCE && wc->refs[level] != 1) ||
+ (wc->stage == UPDATE_BACKREF && !(wc->flags[level] & flag)))) {
BUG_ON(!path->locks[level]);
ret = btrfs_lookup_extent_info(trans, root,
eb->start, eb->len,
&wc->refs[level],
- &wc->flags[level]);
- BUG_ON(ret);
- BUG_ON(wc->refs[level] == 0);
- }
-
- if (wc->stage == DROP_REFERENCE &&
- wc->update_ref && wc->refs[level] > 1) {
- BUG_ON(eb == root->node);
- BUG_ON(path->slots[level] > 0);
- if (level == 0)
- btrfs_item_key_to_cpu(eb, &key, path->slots[level]);
- else
- btrfs_node_key_to_cpu(eb, &key, path->slots[level]);
- if (btrfs_header_owner(eb) == root->root_key.objectid &&
- btrfs_comp_cpu_keys(&key, &wc->update_progress) >= 0) {
- wc->stage = UPDATE_BACKREF;
- wc->shared_level = level;
- }
+ &wc->flags[level]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level] == 0);
}
if (wc->stage == DROP_REFERENCE) {
return 0;
}
+/*
+ * hepler to process tree block pointer.
+ *
+ * when wc->stage == DROP_REFERENCE, this function checks
+ * reference count of the block pointed to. if the block
+ * is shared and we need update back refs for the subtree
+ * rooted at the block, this function changes wc->stage to
+ * UPDATE_BACKREF. if the block is shared and there is no
+ * need to update back, this function drops the reference
+ * to the block.
+ *
+ * NOTE: return value 1 means we should stop walking down.
+ */
+static noinline int do_walk_down(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct btrfs_path *path,
+ struct walk_control *wc, int *lookup_info)
+{
+ u64 bytenr;
+ u64 generation;
+ u64 parent;
+ u32 blocksize;
+ struct btrfs_key key;
+ struct extent_buffer *next;
+ int level = wc->level;
+ int reada = 0;
+ int ret = 0;
+
+ generation = btrfs_node_ptr_generation(path->nodes[level],
+ path->slots[level]);
+ /*
+ * if the lower level block was created before the snapshot
+ * was created, we know there is no need to update back refs
+ * for the subtree
+ */
+ if (wc->stage == UPDATE_BACKREF &&
+ generation <= root->root_key.offset) {
+ *lookup_info = 1;
+ return 1;
+ }
+
+ bytenr = btrfs_node_blockptr(path->nodes[level], path->slots[level]);
+ blocksize = btrfs_level_size(root, level - 1);
+
+ next = btrfs_find_tree_block(root, bytenr, blocksize);
+ if (!next) {
+ next = btrfs_find_create_tree_block(root, bytenr, blocksize);
+ reada = 1;
+ }
+ btrfs_tree_lock(next);
+ btrfs_set_lock_blocking(next);
+
+ ret = btrfs_lookup_extent_info(trans, root, bytenr, blocksize,
+ &wc->refs[level - 1],
+ &wc->flags[level - 1]);
+ BUG_ON(ret);
+ BUG_ON(wc->refs[level - 1] == 0);
+ *lookup_info = 0;
+
+ if (wc->stage == DROP_REFERENCE) {
+ if (wc->refs[level - 1] > 1) {
+ if (level == 1 &&
+ (wc->flags[0] & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+ goto skip;
+
+ if (!wc->update_ref ||
+ generation <= root->root_key.offset)
+ goto skip;
+
+ btrfs_node_key_to_cpu(path->nodes[level], &key,
+ path->slots[level]);
+ ret = btrfs_comp_cpu_keys(&key, &wc->update_progress);
+ if (ret < 0)
+ goto skip;
+
+ wc->stage = UPDATE_BACKREF;
+ wc->shared_level = level - 1;
+ }
+ } else {
+ if (level == 1 &&
+ (wc->flags[0] & BTRFS_BLOCK_FLAG_FULL_BACKREF))
+ goto skip;
+ }
+
+ if (!btrfs_buffer_uptodate(next, generation)) {
+ btrfs_tree_unlock(next);
+ free_extent_buffer(next);
+ next = NULL;
+ *lookup_info = 1;
+ }
+
+ if (!next) {
+ if (reada && level == 1)
+ reada_walk_down(trans, root, wc, path);
+ next = read_tree_block(root, bytenr, blocksize, generation);
+ btrfs_tree_lock(next);
+ btrfs_set_lock_blocking(next);
+ }
+
+ level--;
+ BUG_ON(level != btrfs_header_level(next));
+ path->nodes[level] = next;
+ path->slots[level] = 0;
+ path->locks[level] = 1;
+ wc->level = level;
+ if (wc->level == 1)
+ wc->reada_slot = 0;
+ return 0;
+skip:
+ wc->refs[level - 1] = 0;
+ wc->flags[level - 1] = 0;
+ if (wc->stage == DROP_REFERENCE) {
+ if (wc->flags[level] & BTRFS_BLOCK_FLAG_FULL_BACKREF) {
+ parent = path->nodes[level]->start;
+ } else {
+ BUG_ON(root->root_key.objectid !=
+ btrfs_header_owner(path->nodes[level]));
+ parent = 0;
+ }
+
+ ret = btrfs_free_extent(trans, root, bytenr, blocksize, parent,
+ root->root_key.objectid, level - 1, 0);
+ BUG_ON(ret);
+ }
+ btrfs_tree_unlock(next);
+ free_extent_buffer(next);
+ *lookup_info = 1;
+ return 1;
+}
+
/*
* hepler to process tree block while walking up the tree.
*
if (level < wc->shared_level)
goto out;
- BUG_ON(wc->refs[level] <= 1);
ret = find_next_key(path, level + 1, &wc->update_progress);
if (ret > 0)
wc->update_ref = 0;
path->locks[level] = 0;
return 1;
}
- } else {
- BUG_ON(level != 0);
}
}
struct btrfs_path *path,
struct walk_control *wc)
{
- struct extent_buffer *next;
- struct extent_buffer *cur;
- u64 bytenr;
- u64 ptr_gen;
- u32 blocksize;
int level = wc->level;
+ int lookup_info = 1;
int ret;
while (level >= 0) {
- cur = path->nodes[level];
- BUG_ON(path->slots[level] >= btrfs_header_nritems(cur));
+ if (path->slots[level] >=
+ btrfs_header_nritems(path->nodes[level]))
+ break;
- ret = walk_down_proc(trans, root, path, wc);
+ ret = walk_down_proc(trans, root, path, wc, lookup_info);
if (ret > 0)
break;
if (level == 0)
break;
- bytenr = btrfs_node_blockptr(cur, path->slots[level]);
- blocksize = btrfs_level_size(root, level - 1);
- ptr_gen = btrfs_node_ptr_generation(cur, path->slots[level]);
-
- next = read_tree_block(root, bytenr, blocksize, ptr_gen);
- btrfs_tree_lock(next);
- btrfs_set_lock_blocking(next);
-
- level--;
- BUG_ON(level != btrfs_header_level(next));
- path->nodes[level] = next;
- path->slots[level] = 0;
- path->locks[level] = 1;
- wc->level = level;
+ ret = do_walk_down(trans, root, path, wc, &lookup_info);
+ if (ret > 0) {
+ path->slots[level]++;
+ continue;
+ }
+ level = wc->level;
}
return 0;
}
err = ret;
goto out;
}
- btrfs_node_key_to_cpu(path->nodes[level], &key,
- path->slots[level]);
- WARN_ON(memcmp(&key, &wc->update_progress, sizeof(key)));
+ WARN_ON(ret > 0);
/*
* unlock our path, this is safe because only this
wc->stage = DROP_REFERENCE;
wc->update_ref = update_ref;
wc->keep_locks = 0;
+ wc->reada_count = BTRFS_NODEPTRS_PER_BLOCK(root);
while (1) {
ret = walk_down_tree(trans, root, path, wc);
ret = btrfs_del_root(trans, tree_root, &root->root_key);
BUG_ON(ret);
- free_extent_buffer(root->node);
- free_extent_buffer(root->commit_root);
- kfree(root);
+ if (root->root_key.objectid != BTRFS_TREE_RELOC_OBJECTID) {
+ ret = btrfs_find_last_root(tree_root, root->root_key.objectid,
+ NULL, NULL);
+ BUG_ON(ret < 0);
+ if (ret > 0) {
+ ret = btrfs_del_orphan_item(trans, tree_root,
+ root->root_key.objectid);
+ BUG_ON(ret);
+ }
+ }
+
+ if (root->in_radix) {
+ btrfs_free_fs_root(tree_root->fs_info, root);
+ } else {
+ free_extent_buffer(root->node);
+ free_extent_buffer(root->commit_root);
+ kfree(root);
+ }
out:
btrfs_end_transaction(trans, tree_root);
kfree(wc);
wc->stage = DROP_REFERENCE;
wc->update_ref = 0;
wc->keep_locks = 1;
+ wc->reada_count = BTRFS_NODEPTRS_PER_BLOCK(root);
while (1) {
wret = walk_down_tree(trans, root, path, wc);
lock_extent(&BTRFS_I(reloc_inode)->io_tree, start, end, GFP_NOFS);
while (1) {
int ret;
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret != -EEXIST) {
free_extent_map(em);
break;
return 0;
}
-#if 0
-static int __insert_orphan_inode(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 objectid, u64 size)
-{
- struct btrfs_path *path;
- struct btrfs_inode_item *item;
- struct extent_buffer *leaf;
- int ret;
-
- path = btrfs_alloc_path();
- if (!path)
- return -ENOMEM;
-
- path->leave_spinning = 1;
- ret = btrfs_insert_empty_inode(trans, root, path, objectid);
- if (ret)
- goto out;
-
- leaf = path->nodes[0];
- item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_item);
- memset_extent_buffer(leaf, 0, (unsigned long)item, sizeof(*item));
- btrfs_set_inode_generation(leaf, item, 1);
- btrfs_set_inode_size(leaf, item, size);
- btrfs_set_inode_mode(leaf, item, S_IFREG | 0600);
- btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS);
- btrfs_mark_buffer_dirty(leaf);
- btrfs_release_path(root, path);
-out:
- btrfs_free_path(path);
- return ret;
-}
-
-static noinline struct inode *create_reloc_inode(struct btrfs_fs_info *fs_info,
- struct btrfs_block_group_cache *group)
+/*
+ * checks to see if its even possible to relocate this block group.
+ *
+ * @return - -1 if it's not a good idea to relocate this block group, 0 if its
+ * ok to go ahead and try.
+ */
+int btrfs_can_relocate(struct btrfs_root *root, u64 bytenr)
{
- struct inode *inode = NULL;
- struct btrfs_trans_handle *trans;
- struct btrfs_root *root;
- struct btrfs_key root_key;
- u64 objectid = BTRFS_FIRST_FREE_OBJECTID;
- int err = 0;
+ struct btrfs_block_group_cache *block_group;
+ struct btrfs_space_info *space_info;
+ struct btrfs_fs_devices *fs_devices = root->fs_info->fs_devices;
+ struct btrfs_device *device;
+ int full = 0;
+ int ret = 0;
- root_key.objectid = BTRFS_DATA_RELOC_TREE_OBJECTID;
- root_key.type = BTRFS_ROOT_ITEM_KEY;
- root_key.offset = (u64)-1;
- root = btrfs_read_fs_root_no_name(fs_info, &root_key);
- if (IS_ERR(root))
- return ERR_CAST(root);
+ block_group = btrfs_lookup_block_group(root->fs_info, bytenr);
- trans = btrfs_start_transaction(root, 1);
- BUG_ON(!trans);
+ /* odd, couldn't find the block group, leave it alone */
+ if (!block_group)
+ return -1;
- err = btrfs_find_free_objectid(trans, root, objectid, &objectid);
- if (err)
+ /* no bytes used, we're good */
+ if (!btrfs_block_group_used(&block_group->item))
goto out;
- err = __insert_orphan_inode(trans, root, objectid, group->key.offset);
- BUG_ON(err);
-
- err = btrfs_insert_file_extent(trans, root, objectid, 0, 0, 0,
- group->key.offset, 0, group->key.offset,
- 0, 0, 0);
- BUG_ON(err);
-
- inode = btrfs_iget_locked(root->fs_info->sb, objectid, root);
- if (inode->i_state & I_NEW) {
- BTRFS_I(inode)->root = root;
- BTRFS_I(inode)->location.objectid = objectid;
- BTRFS_I(inode)->location.type = BTRFS_INODE_ITEM_KEY;
- BTRFS_I(inode)->location.offset = 0;
- btrfs_read_locked_inode(inode);
- unlock_new_inode(inode);
- BUG_ON(is_bad_inode(inode));
- } else {
- BUG_ON(1);
- }
- BTRFS_I(inode)->index_cnt = group->key.objectid;
-
- err = btrfs_orphan_add(trans, inode);
-out:
- btrfs_end_transaction(trans, root);
- if (err) {
- if (inode)
- iput(inode);
- inode = ERR_PTR(err);
- }
- return inode;
-}
-
-int btrfs_reloc_clone_csums(struct inode *inode, u64 file_pos, u64 len)
-{
-
- struct btrfs_ordered_sum *sums;
- struct btrfs_sector_sum *sector_sum;
- struct btrfs_ordered_extent *ordered;
- struct btrfs_root *root = BTRFS_I(inode)->root;
- struct list_head list;
- size_t offset;
- int ret;
- u64 disk_bytenr;
-
- INIT_LIST_HEAD(&list);
-
- ordered = btrfs_lookup_ordered_extent(inode, file_pos);
- BUG_ON(ordered->file_offset != file_pos || ordered->len != len);
-
- disk_bytenr = file_pos + BTRFS_I(inode)->index_cnt;
- ret = btrfs_lookup_csums_range(root->fs_info->csum_root, disk_bytenr,
- disk_bytenr + len - 1, &list);
-
- while (!list_empty(&list)) {
- sums = list_entry(list.next, struct btrfs_ordered_sum, list);
- list_del_init(&sums->list);
-
- sector_sum = sums->sums;
- sums->bytenr = ordered->start;
+ space_info = block_group->space_info;
+ spin_lock(&space_info->lock);
- offset = 0;
- while (offset < sums->len) {
- sector_sum->bytenr += ordered->start - disk_bytenr;
- sector_sum++;
- offset += root->sectorsize;
- }
+ full = space_info->full;
- btrfs_add_ordered_sum(inode, ordered, sums);
+ /*
+ * if this is the last block group we have in this space, we can't
+ * relocate it unless we're able to allocate a new chunk below.
+ *
+ * Otherwise, we need to make sure we have room in the space to handle
+ * all of the extents from this block group. If we can, we're good
+ */
+ if ((space_info->total_bytes != block_group->key.offset) &&
+ (space_info->bytes_used + space_info->bytes_reserved +
+ space_info->bytes_pinned + space_info->bytes_readonly +
+ btrfs_block_group_used(&block_group->item) <
+ space_info->total_bytes)) {
+ spin_unlock(&space_info->lock);
+ goto out;
}
- btrfs_put_ordered_extent(ordered);
- return 0;
-}
-
-int btrfs_relocate_block_group(struct btrfs_root *root, u64 group_start)
-{
- struct btrfs_trans_handle *trans;
- struct btrfs_path *path;
- struct btrfs_fs_info *info = root->fs_info;
- struct extent_buffer *leaf;
- struct inode *reloc_inode;
- struct btrfs_block_group_cache *block_group;
- struct btrfs_key key;
- u64 skipped;
- u64 cur_byte;
- u64 total_found;
- u32 nritems;
- int ret;
- int progress;
- int pass = 0;
-
- root = root->fs_info->extent_root;
-
- block_group = btrfs_lookup_block_group(info, group_start);
- BUG_ON(!block_group);
-
- printk(KERN_INFO "btrfs relocating block group %llu flags %llu\n",
- (unsigned long long)block_group->key.objectid,
- (unsigned long long)block_group->flags);
-
- path = btrfs_alloc_path();
- BUG_ON(!path);
-
- reloc_inode = create_reloc_inode(info, block_group);
- BUG_ON(IS_ERR(reloc_inode));
-
- __alloc_chunk_for_shrink(root, block_group, 1);
- set_block_group_readonly(block_group);
-
- btrfs_start_delalloc_inodes(info->tree_root);
- btrfs_wait_ordered_extents(info->tree_root, 0);
-again:
- skipped = 0;
- total_found = 0;
- progress = 0;
- key.objectid = block_group->key.objectid;
- key.offset = 0;
- key.type = 0;
- cur_byte = key.objectid;
-
- trans = btrfs_start_transaction(info->tree_root, 1);
- btrfs_commit_transaction(trans, info->tree_root);
+ spin_unlock(&space_info->lock);
- mutex_lock(&root->fs_info->cleaner_mutex);
- btrfs_clean_old_snapshots(info->tree_root);
- btrfs_remove_leaf_refs(info->tree_root, (u64)-1, 1);
- mutex_unlock(&root->fs_info->cleaner_mutex);
+ /*
+ * ok we don't have enough space, but maybe we have free space on our
+ * devices to allocate new chunks for relocation, so loop through our
+ * alloc devices and guess if we have enough space. However, if we
+ * were marked as full, then we know there aren't enough chunks, and we
+ * can just return.
+ */
+ ret = -1;
+ if (full)
+ goto out;
- trans = btrfs_start_transaction(info->tree_root, 1);
- btrfs_commit_transaction(trans, info->tree_root);
+ mutex_lock(&root->fs_info->chunk_mutex);
+ list_for_each_entry(device, &fs_devices->alloc_list, dev_alloc_list) {
+ u64 min_free = btrfs_block_group_used(&block_group->item);
+ u64 dev_offset, max_avail;
- while (1) {
- ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
- if (ret < 0)
- goto out;
-next:
- leaf = path->nodes[0];
- nritems = btrfs_header_nritems(leaf);
- if (path->slots[0] >= nritems) {
- ret = btrfs_next_leaf(root, path);
- if (ret < 0)
- goto out;
- if (ret == 1) {
- ret = 0;
+ /*
+ * check to make sure we can actually find a chunk with enough
+ * space to fit our block group in.
+ */
+ if (device->total_bytes > device->bytes_used + min_free) {
+ ret = find_free_dev_extent(NULL, device, min_free,
+ &dev_offset, &max_avail);
+ if (!ret)
break;
- }
- leaf = path->nodes[0];
- nritems = btrfs_header_nritems(leaf);
- }
-
- btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
-
- if (key.objectid >= block_group->key.objectid +
- block_group->key.offset)
- break;
-
- if (progress && need_resched()) {
- btrfs_release_path(root, path);
- cond_resched();
- progress = 0;
- continue;
- }
- progress = 1;
-
- if (btrfs_key_type(&key) != BTRFS_EXTENT_ITEM_KEY ||
- key.objectid + key.offset <= cur_byte) {
- path->slots[0]++;
- goto next;
- }
-
- total_found++;
- cur_byte = key.objectid + key.offset;
- btrfs_release_path(root, path);
-
- __alloc_chunk_for_shrink(root, block_group, 0);
- ret = relocate_one_extent(root, path, &key, block_group,
- reloc_inode, pass);
- BUG_ON(ret < 0);
- if (ret > 0)
- skipped++;
-
- key.objectid = cur_byte;
- key.type = 0;
- key.offset = 0;
- }
-
- btrfs_release_path(root, path);
-
- if (pass == 0) {
- btrfs_wait_ordered_range(reloc_inode, 0, (u64)-1);
- invalidate_mapping_pages(reloc_inode->i_mapping, 0, -1);
- }
-
- if (total_found > 0) {
- printk(KERN_INFO "btrfs found %llu extents in pass %d\n",
- (unsigned long long)total_found, pass);
- pass++;
- if (total_found == skipped && pass > 2) {
- iput(reloc_inode);
- reloc_inode = create_reloc_inode(info, block_group);
- pass = 0;
+ ret = -1;
}
- goto again;
}
-
- /* delete reloc_inode */
- iput(reloc_inode);
-
- /* unpin extents in this range */
- trans = btrfs_start_transaction(info->tree_root, 1);
- btrfs_commit_transaction(trans, info->tree_root);
-
- spin_lock(&block_group->lock);
- WARN_ON(block_group->pinned > 0);
- WARN_ON(block_group->reserved > 0);
- WARN_ON(btrfs_block_group_used(&block_group->item) > 0);
- spin_unlock(&block_group->lock);
- btrfs_put_block_group(block_group);
- ret = 0;
+ mutex_unlock(&root->fs_info->chunk_mutex);
out:
- btrfs_free_path(path);
+ btrfs_put_block_group(block_group);
return ret;
}
-#endif
static int find_first_block_group(struct btrfs_root *root,
struct btrfs_path *path, struct btrfs_key *key)
{
struct btrfs_block_group_cache *block_group;
struct btrfs_space_info *space_info;
+ struct btrfs_caching_control *caching_ctl;
struct rb_node *n;
+ down_write(&info->extent_commit_sem);
+ while (!list_empty(&info->caching_block_groups)) {
+ caching_ctl = list_entry(info->caching_block_groups.next,
+ struct btrfs_caching_control, list);
+ list_del(&caching_ctl->list);
+ put_caching_control(caching_ctl);
+ }
+ up_write(&info->extent_commit_sem);
+
spin_lock(&info->block_group_cache_lock);
while ((n = rb_last(&info->block_group_cache_tree)) != NULL) {
block_group = rb_entry(n, struct btrfs_block_group_cache,
up_write(&block_group->space_info->groups_sem);
if (block_group->cached == BTRFS_CACHE_STARTED)
- wait_event(block_group->caching_q,
- block_group_cache_done(block_group));
+ wait_block_group_cache_done(block_group);
btrfs_remove_free_space_cache(block_group);
spin_lock_init(&cache->lock);
spin_lock_init(&cache->tree_lock);
cache->fs_info = info;
- init_waitqueue_head(&cache->caching_q);
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
cache->flags = btrfs_block_group_flags(&cache->item);
cache->sectorsize = root->sectorsize;
- remove_sb_from_cache(root, cache);
-
/*
* check for two cases, either we are full, and therefore
* don't need to bother with the caching work since we won't
* time, particularly in the full case.
*/
if (found_key.offset == btrfs_block_group_used(&cache->item)) {
+ exclude_super_stripes(root, cache);
+ cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
+ free_excluded_extents(root, cache);
} else if (btrfs_block_group_used(&cache->item) == 0) {
+ exclude_super_stripes(root, cache);
+ cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
add_new_free_space(cache, root->fs_info,
found_key.objectid,
found_key.objectid +
found_key.offset);
+ free_excluded_extents(root, cache);
}
ret = update_space_info(info, cache->flags, found_key.offset,
&space_info);
BUG_ON(ret);
cache->space_info = space_info;
+ spin_lock(&cache->space_info->lock);
+ cache->space_info->bytes_super += cache->bytes_super;
+ spin_unlock(&cache->space_info->lock);
+
down_write(&space_info->groups_sem);
list_add_tail(&cache->list, &space_info->block_groups);
up_write(&space_info->groups_sem);
atomic_set(&cache->count, 1);
spin_lock_init(&cache->lock);
spin_lock_init(&cache->tree_lock);
- init_waitqueue_head(&cache->caching_q);
INIT_LIST_HEAD(&cache->list);
INIT_LIST_HEAD(&cache->cluster_list);
cache->flags = type;
btrfs_set_block_group_flags(&cache->item, type);
+ cache->last_byte_to_unpin = (u64)-1;
cache->cached = BTRFS_CACHE_FINISHED;
- remove_sb_from_cache(root, cache);
+ exclude_super_stripes(root, cache);
add_new_free_space(cache, root->fs_info, chunk_offset,
chunk_offset + size);
+ free_excluded_extents(root, cache);
+
ret = update_space_info(root->fs_info, cache->flags, size, bytes_used,
&cache->space_info);
BUG_ON(ret);
+
+ spin_lock(&cache->space_info->lock);
+ cache->space_info->bytes_super += cache->bytes_super;
+ spin_unlock(&cache->space_info->lock);
+
down_write(&cache->space_info->groups_sem);
list_add_tail(&cache->list, &cache->space_info->block_groups);
up_write(&cache->space_info->groups_sem);
up_write(&block_group->space_info->groups_sem);
if (block_group->cached == BTRFS_CACHE_STARTED)
- wait_event(block_group->caching_q,
- block_group_cache_done(block_group));
+ wait_block_group_cache_done(block_group);
btrfs_remove_free_space_cache(block_group);
return NULL;
}
+static void merge_cb(struct extent_io_tree *tree, struct extent_state *new,
+ struct extent_state *other)
+{
+ if (tree->ops && tree->ops->merge_extent_hook)
+ tree->ops->merge_extent_hook(tree->mapping->host, new,
+ other);
+}
+
/*
* utility function to look for merge candidates inside a given range.
* Any extents with matching state are merged together into a single
other = rb_entry(other_node, struct extent_state, rb_node);
if (other->end == state->start - 1 &&
other->state == state->state) {
+ merge_cb(tree, state, other);
state->start = other->start;
other->tree = NULL;
rb_erase(&other->rb_node, &tree->state);
other = rb_entry(other_node, struct extent_state, rb_node);
if (other->start == state->end + 1 &&
other->state == state->state) {
+ merge_cb(tree, state, other);
other->start = state->start;
state->tree = NULL;
rb_erase(&state->rb_node, &tree->state);
free_extent_state(state);
+ state = NULL;
}
}
+
return 0;
}
-static void set_state_cb(struct extent_io_tree *tree,
+static int set_state_cb(struct extent_io_tree *tree,
struct extent_state *state,
unsigned long bits)
{
if (tree->ops && tree->ops->set_bit_hook) {
- tree->ops->set_bit_hook(tree->mapping->host, state->start,
- state->end, state->state, bits);
+ return tree->ops->set_bit_hook(tree->mapping->host,
+ state->start, state->end,
+ state->state, bits);
}
+
+ return 0;
}
static void clear_state_cb(struct extent_io_tree *tree,
struct extent_state *state,
unsigned long bits)
{
- if (tree->ops && tree->ops->clear_bit_hook) {
- tree->ops->clear_bit_hook(tree->mapping->host, state->start,
- state->end, state->state, bits);
- }
+ if (tree->ops && tree->ops->clear_bit_hook)
+ tree->ops->clear_bit_hook(tree->mapping->host, state, bits);
}
/*
int bits)
{
struct rb_node *node;
+ int ret;
if (end < start) {
printk(KERN_ERR "btrfs end < start %llu %llu\n",
(unsigned long long)start);
WARN_ON(1);
}
+ state->start = start;
+ state->end = end;
+ ret = set_state_cb(tree, state, bits);
+ if (ret)
+ return ret;
+
if (bits & EXTENT_DIRTY)
tree->dirty_bytes += end - start + 1;
- set_state_cb(tree, state, bits);
state->state |= bits;
- state->start = start;
- state->end = end;
node = tree_insert(&tree->state, end, &state->rb_node);
if (node) {
struct extent_state *found;
return 0;
}
+static int split_cb(struct extent_io_tree *tree, struct extent_state *orig,
+ u64 split)
+{
+ if (tree->ops && tree->ops->split_extent_hook)
+ return tree->ops->split_extent_hook(tree->mapping->host,
+ orig, split);
+ return 0;
+}
+
/*
* split a given extent state struct in two, inserting the preallocated
* struct 'prealloc' as the newly created second half. 'split' indicates an
struct extent_state *prealloc, u64 split)
{
struct rb_node *node;
+
+ split_cb(tree, orig, split);
+
prealloc->start = orig->start;
prealloc->end = split - 1;
prealloc->state = orig->state;
struct extent_state *state, int bits, int wake,
int delete)
{
- int ret = state->state & bits;
+ int bits_to_clear = bits & ~EXTENT_DO_ACCOUNTING;
+ int ret = state->state & bits_to_clear;
if ((bits & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) {
u64 range = state->end - state->start + 1;
tree->dirty_bytes -= range;
}
clear_state_cb(tree, state, bits);
- state->state &= ~bits;
+ state->state &= ~bits_to_clear;
if (wake)
wake_up(&state->wq);
if (delete || state->state == 0) {
* bits were already set, or zero if none of the bits were already set.
*/
int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int wake, int delete, gfp_t mask)
+ int bits, int wake, int delete,
+ struct extent_state **cached_state,
+ gfp_t mask)
{
struct extent_state *state;
+ struct extent_state *cached;
struct extent_state *prealloc = NULL;
+ struct rb_node *next_node;
struct rb_node *node;
u64 last_end;
int err;
}
spin_lock(&tree->lock);
+ if (cached_state) {
+ cached = *cached_state;
+ *cached_state = NULL;
+ cached_state = NULL;
+ if (cached && cached->tree && cached->start == start) {
+ atomic_dec(&cached->refs);
+ state = cached;
+ goto hit_next;
+ }
+ free_extent_state(cached);
+ }
/*
* this search will find the extents that end after
* our range starts
if (!node)
goto out;
state = rb_entry(node, struct extent_state, rb_node);
+hit_next:
if (state->start > end)
goto out;
WARN_ON(state->end < start);
if (err)
goto out;
if (state->end <= end) {
- set |= clear_state_bit(tree, state, bits,
- wake, delete);
+ set |= clear_state_bit(tree, state, bits, wake,
+ delete);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
- } else {
- start = state->start;
}
goto search_again;
}
prealloc = alloc_extent_state(GFP_ATOMIC);
err = split_state(tree, state, prealloc, end + 1);
BUG_ON(err == -EEXIST);
-
if (wake)
wake_up(&state->wq);
- set |= clear_state_bit(tree, prealloc, bits,
- wake, delete);
+
+ set |= clear_state_bit(tree, prealloc, bits, wake, delete);
+
prealloc = NULL;
goto out;
}
+ if (state->end < end && prealloc && !need_resched())
+ next_node = rb_next(&state->rb_node);
+ else
+ next_node = NULL;
+
set |= clear_state_bit(tree, state, bits, wake, delete);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
+ if (start <= end && next_node) {
+ state = rb_entry(next_node, struct extent_state,
+ rb_node);
+ if (state->start == start)
+ goto hit_next;
+ }
goto search_again;
out:
return 0;
}
-static void set_state_bits(struct extent_io_tree *tree,
+static int set_state_bits(struct extent_io_tree *tree,
struct extent_state *state,
int bits)
{
+ int ret;
+
+ ret = set_state_cb(tree, state, bits);
+ if (ret)
+ return ret;
+
if ((bits & EXTENT_DIRTY) && !(state->state & EXTENT_DIRTY)) {
u64 range = state->end - state->start + 1;
tree->dirty_bytes += range;
}
- set_state_cb(tree, state, bits);
state->state |= bits;
+
+ return 0;
+}
+
+static void cache_state(struct extent_state *state,
+ struct extent_state **cached_ptr)
+{
+ if (cached_ptr && !(*cached_ptr)) {
+ if (state->state & (EXTENT_IOBITS | EXTENT_BOUNDARY)) {
+ *cached_ptr = state;
+ atomic_inc(&state->refs);
+ }
+ }
}
/*
- * set some bits on a range in the tree. This may require allocations
- * or sleeping, so the gfp mask is used to indicate what is allowed.
+ * set some bits on a range in the tree. This may require allocations or
+ * sleeping, so the gfp mask is used to indicate what is allowed.
*
- * If 'exclusive' == 1, this will fail with -EEXIST if some part of the
- * range already has the desired bits set. The start of the existing
- * range is returned in failed_start in this case.
+ * If any of the exclusive bits are set, this will fail with -EEXIST if some
+ * part of the range already has the desired bits set. The start of the
+ * existing range is returned in failed_start in this case.
*
- * [start, end] is inclusive
- * This takes the tree lock.
+ * [start, end] is inclusive This takes the tree lock.
*/
+
static int set_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int exclusive, u64 *failed_start,
+ int bits, int exclusive_bits, u64 *failed_start,
+ struct extent_state **cached_state,
gfp_t mask)
{
struct extent_state *state;
struct extent_state *prealloc = NULL;
struct rb_node *node;
int err = 0;
- int set;
u64 last_start;
u64 last_end;
+
again:
if (!prealloc && (mask & __GFP_WAIT)) {
prealloc = alloc_extent_state(mask);
}
spin_lock(&tree->lock);
+ if (cached_state && *cached_state) {
+ state = *cached_state;
+ if (state->start == start && state->tree) {
+ node = &state->rb_node;
+ goto hit_next;
+ }
+ }
/*
* this search will find all the extents that end after
* our range starts.
BUG_ON(err == -EEXIST);
goto out;
}
-
state = rb_entry(node, struct extent_state, rb_node);
+hit_next:
last_start = state->start;
last_end = state->end;
* Just lock what we found and keep going
*/
if (state->start == start && state->end <= end) {
- set = state->state & bits;
- if (set && exclusive) {
+ struct rb_node *next_node;
+ if (state->state & exclusive_bits) {
*failed_start = state->start;
err = -EEXIST;
goto out;
}
- set_state_bits(tree, state, bits);
+
+ err = set_state_bits(tree, state, bits);
+ if (err)
+ goto out;
+
+ cache_state(state, cached_state);
merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
+
start = last_end + 1;
+ if (start < end && prealloc && !need_resched()) {
+ next_node = rb_next(node);
+ if (next_node) {
+ state = rb_entry(next_node, struct extent_state,
+ rb_node);
+ if (state->start == start)
+ goto hit_next;
+ }
+ }
goto search_again;
}
* desired bit on it.
*/
if (state->start < start) {
- set = state->state & bits;
- if (exclusive && set) {
+ if (state->state & exclusive_bits) {
*failed_start = start;
err = -EEXIST;
goto out;
if (err)
goto out;
if (state->end <= end) {
- set_state_bits(tree, state, bits);
+ err = set_state_bits(tree, state, bits);
+ if (err)
+ goto out;
+ cache_state(state, cached_state);
merge_state(tree, state);
if (last_end == (u64)-1)
goto out;
start = last_end + 1;
- } else {
- start = state->start;
}
goto search_again;
}
this_end = last_start - 1;
err = insert_state(tree, prealloc, start, this_end,
bits);
- prealloc = NULL;
BUG_ON(err == -EEXIST);
- if (err)
+ if (err) {
+ prealloc = NULL;
goto out;
+ }
+ cache_state(prealloc, cached_state);
+ prealloc = NULL;
start = this_end + 1;
goto search_again;
}
* on the first half
*/
if (state->start <= end && state->end > end) {
- set = state->state & bits;
- if (exclusive && set) {
+ if (state->state & exclusive_bits) {
*failed_start = start;
err = -EEXIST;
goto out;
err = split_state(tree, state, prealloc, end + 1);
BUG_ON(err == -EEXIST);
- set_state_bits(tree, prealloc, bits);
+ err = set_state_bits(tree, prealloc, bits);
+ if (err) {
+ prealloc = NULL;
+ goto out;
+ }
+ cache_state(prealloc, cached_state);
merge_state(tree, prealloc);
prealloc = NULL;
goto out;
gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_DIRTY, 0, NULL,
- mask);
-}
-
-int set_extent_ordered(struct extent_io_tree *tree, u64 start, u64 end,
- gfp_t mask)
-{
- return set_extent_bit(tree, start, end, EXTENT_ORDERED, 0, NULL, mask);
+ NULL, mask);
}
int set_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask)
{
return set_extent_bit(tree, start, end, bits, 0, NULL,
- mask);
+ NULL, mask);
}
int clear_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask)
{
- return clear_extent_bit(tree, start, end, bits, 0, 0, mask);
+ return clear_extent_bit(tree, start, end, bits, 0, 0, NULL, mask);
}
int set_extent_delalloc(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return set_extent_bit(tree, start, end,
- EXTENT_DELALLOC | EXTENT_DIRTY,
- 0, NULL, mask);
+ EXTENT_DELALLOC | EXTENT_DIRTY | EXTENT_UPTODATE,
+ 0, NULL, NULL, mask);
}
int clear_extent_dirty(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return clear_extent_bit(tree, start, end,
- EXTENT_DIRTY | EXTENT_DELALLOC, 0, 0, mask);
-}
-
-int clear_extent_ordered(struct extent_io_tree *tree, u64 start, u64 end,
- gfp_t mask)
-{
- return clear_extent_bit(tree, start, end, EXTENT_ORDERED, 1, 0, mask);
+ EXTENT_DIRTY | EXTENT_DELALLOC |
+ EXTENT_DO_ACCOUNTING, 0, 0,
+ NULL, mask);
}
int set_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_NEW, 0, NULL,
- mask);
+ NULL, mask);
}
static int clear_extent_new(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
- return clear_extent_bit(tree, start, end, EXTENT_NEW, 0, 0, mask);
+ return clear_extent_bit(tree, start, end, EXTENT_NEW, 0, 0,
+ NULL, mask);
}
int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
return set_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, NULL,
- mask);
+ NULL, mask);
}
static int clear_extent_uptodate(struct extent_io_tree *tree, u64 start,
u64 end, gfp_t mask)
{
- return clear_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, 0, mask);
-}
-
-static int set_extent_writeback(struct extent_io_tree *tree, u64 start, u64 end,
- gfp_t mask)
-{
- return set_extent_bit(tree, start, end, EXTENT_WRITEBACK,
- 0, NULL, mask);
-}
-
-static int clear_extent_writeback(struct extent_io_tree *tree, u64 start,
- u64 end, gfp_t mask)
-{
- return clear_extent_bit(tree, start, end, EXTENT_WRITEBACK, 1, 0, mask);
+ return clear_extent_bit(tree, start, end, EXTENT_UPTODATE, 0, 0,
+ NULL, mask);
}
int wait_on_extent_writeback(struct extent_io_tree *tree, u64 start, u64 end)
* either insert or lock state struct between start and end use mask to tell
* us if waiting is desired.
*/
-int lock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask)
+int lock_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
+ int bits, struct extent_state **cached_state, gfp_t mask)
{
int err;
u64 failed_start;
while (1) {
- err = set_extent_bit(tree, start, end, EXTENT_LOCKED, 1,
- &failed_start, mask);
+ err = set_extent_bit(tree, start, end, EXTENT_LOCKED | bits,
+ EXTENT_LOCKED, &failed_start,
+ cached_state, mask);
if (err == -EEXIST && (mask & __GFP_WAIT)) {
wait_extent_bit(tree, failed_start, end, EXTENT_LOCKED);
start = failed_start;
return err;
}
+int lock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask)
+{
+ return lock_extent_bits(tree, start, end, 0, NULL, mask);
+}
+
int try_lock_extent(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
int err;
u64 failed_start;
- err = set_extent_bit(tree, start, end, EXTENT_LOCKED, 1,
- &failed_start, mask);
+ err = set_extent_bit(tree, start, end, EXTENT_LOCKED, EXTENT_LOCKED,
+ &failed_start, NULL, mask);
if (err == -EEXIST) {
if (failed_start > start)
clear_extent_bit(tree, start, failed_start - 1,
- EXTENT_LOCKED, 1, 0, mask);
+ EXTENT_LOCKED, 1, 0, NULL, mask);
return 0;
}
return 1;
}
+int unlock_extent_cached(struct extent_io_tree *tree, u64 start, u64 end,
+ struct extent_state **cached, gfp_t mask)
+{
+ return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, cached,
+ mask);
+}
+
int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask)
{
- return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, mask);
+ return clear_extent_bit(tree, start, end, EXTENT_LOCKED, 1, 0, NULL,
+ mask);
}
/*
page_cache_release(page);
index++;
}
- set_extent_dirty(tree, start, end, GFP_NOFS);
return 0;
}
page_cache_release(page);
index++;
}
- set_extent_writeback(tree, start, end, GFP_NOFS);
return 0;
}
u64 delalloc_start;
u64 delalloc_end;
u64 found;
+ struct extent_state *cached_state = NULL;
int ret;
int loops = 0;
/* some of the pages are gone, lets avoid looping by
* shortening the size of the delalloc range we're searching
*/
+ free_extent_state(cached_state);
if (!loops) {
unsigned long offset = (*start) & (PAGE_CACHE_SIZE - 1);
max_bytes = PAGE_CACHE_SIZE - offset;
BUG_ON(ret);
/* step three, lock the state bits for the whole range */
- lock_extent(tree, delalloc_start, delalloc_end, GFP_NOFS);
+ lock_extent_bits(tree, delalloc_start, delalloc_end,
+ 0, &cached_state, GFP_NOFS);
/* then test to make sure it is all still delalloc */
ret = test_range_bit(tree, delalloc_start, delalloc_end,
- EXTENT_DELALLOC, 1);
+ EXTENT_DELALLOC, 1, cached_state);
if (!ret) {
- unlock_extent(tree, delalloc_start, delalloc_end, GFP_NOFS);
+ unlock_extent_cached(tree, delalloc_start, delalloc_end,
+ &cached_state, GFP_NOFS);
__unlock_for_delalloc(inode, locked_page,
delalloc_start, delalloc_end);
cond_resched();
goto again;
}
+ free_extent_state(cached_state);
*start = delalloc_start;
*end = delalloc_end;
out_failed:
int extent_clear_unlock_delalloc(struct inode *inode,
struct extent_io_tree *tree,
u64 start, u64 end, struct page *locked_page,
- int unlock_pages,
- int clear_unlock,
- int clear_delalloc, int clear_dirty,
- int set_writeback,
- int end_writeback)
+ unsigned long op)
{
int ret;
struct page *pages[16];
int i;
int clear_bits = 0;
- if (clear_unlock)
+ if (op & EXTENT_CLEAR_UNLOCK)
clear_bits |= EXTENT_LOCKED;
- if (clear_dirty)
+ if (op & EXTENT_CLEAR_DIRTY)
clear_bits |= EXTENT_DIRTY;
- if (clear_delalloc)
+ if (op & EXTENT_CLEAR_DELALLOC)
clear_bits |= EXTENT_DELALLOC;
- clear_extent_bit(tree, start, end, clear_bits, 1, 0, GFP_NOFS);
- if (!(unlock_pages || clear_dirty || set_writeback || end_writeback))
+ if (op & EXTENT_CLEAR_ACCOUNTING)
+ clear_bits |= EXTENT_DO_ACCOUNTING;
+
+ clear_extent_bit(tree, start, end, clear_bits, 1, 0, NULL, GFP_NOFS);
+ if (!(op & (EXTENT_CLEAR_UNLOCK_PAGE | EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK | EXTENT_END_WRITEBACK |
+ EXTENT_SET_PRIVATE2)))
return 0;
while (nr_pages > 0) {
min_t(unsigned long,
nr_pages, ARRAY_SIZE(pages)), pages);
for (i = 0; i < ret; i++) {
+
+ if (op & EXTENT_SET_PRIVATE2)
+ SetPagePrivate2(pages[i]);
+
if (pages[i] == locked_page) {
page_cache_release(pages[i]);
continue;
}
- if (clear_dirty)
+ if (op & EXTENT_CLEAR_DIRTY)
clear_page_dirty_for_io(pages[i]);
- if (set_writeback)
+ if (op & EXTENT_SET_WRITEBACK)
set_page_writeback(pages[i]);
- if (end_writeback)
+ if (op & EXTENT_END_WRITEBACK)
end_page_writeback(pages[i]);
- if (unlock_pages)
+ if (op & EXTENT_CLEAR_UNLOCK_PAGE)
unlock_page(pages[i]);
page_cache_release(pages[i]);
}
* range is found set.
*/
int test_range_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int filled)
+ int bits, int filled, struct extent_state *cached)
{
struct extent_state *state = NULL;
struct rb_node *node;
int bitset = 0;
spin_lock(&tree->lock);
- node = tree_search(tree, start);
+ if (cached && cached->tree && cached->start == start)
+ node = &cached->rb_node;
+ else
+ node = tree_search(tree, start);
while (node && start <= end) {
state = rb_entry(node, struct extent_state, rb_node);
bitset = 0;
break;
}
+
+ if (state->end == (u64)-1)
+ break;
+
start = state->end + 1;
if (start > end)
break;
{
u64 start = (u64)page->index << PAGE_CACHE_SHIFT;
u64 end = start + PAGE_CACHE_SIZE - 1;
- if (test_range_bit(tree, start, end, EXTENT_UPTODATE, 1))
+ if (test_range_bit(tree, start, end, EXTENT_UPTODATE, 1, NULL))
SetPageUptodate(page);
return 0;
}
{
u64 start = (u64)page->index << PAGE_CACHE_SHIFT;
u64 end = start + PAGE_CACHE_SIZE - 1;
- if (!test_range_bit(tree, start, end, EXTENT_LOCKED, 0))
+ if (!test_range_bit(tree, start, end, EXTENT_LOCKED, 0, NULL))
unlock_page(page);
return 0;
}
static int check_page_writeback(struct extent_io_tree *tree,
struct page *page)
{
- u64 start = (u64)page->index << PAGE_CACHE_SHIFT;
- u64 end = start + PAGE_CACHE_SIZE - 1;
- if (!test_range_bit(tree, start, end, EXTENT_WRITEBACK, 0))
- end_page_writeback(page);
+ end_page_writeback(page);
return 0;
}
}
if (!uptodate) {
- clear_extent_uptodate(tree, start, end, GFP_ATOMIC);
+ clear_extent_uptodate(tree, start, end, GFP_NOFS);
ClearPageUptodate(page);
SetPageError(page);
}
- clear_extent_writeback(tree, start, end, GFP_ATOMIC);
-
if (whole_page)
end_page_writeback(page);
else
continue;
}
/* the get_extent function already copied into the page */
- if (test_range_bit(tree, cur, cur_end, EXTENT_UPTODATE, 1)) {
+ if (test_range_bit(tree, cur, cur_end,
+ EXTENT_UPTODATE, 1, NULL)) {
check_page_uptodate(tree, page);
unlock_extent(tree, cur, cur + iosize - 1, GFP_NOFS);
cur = cur + iosize;
u64 iosize;
u64 unlock_start;
sector_t sector;
+ struct extent_state *cached_state = NULL;
struct extent_map *em;
struct block_device *bdev;
int ret;
delalloc_end = 0;
page_started = 0;
if (!epd->extent_locked) {
+ u64 delalloc_to_write = 0;
/*
* make sure the wbc mapping index is at least updated
* to this page.
tree->ops->fill_delalloc(inode, page, delalloc_start,
delalloc_end, &page_started,
&nr_written);
+ /*
+ * delalloc_end is already one less than the total
+ * length, so we don't subtract one from
+ * PAGE_CACHE_SIZE
+ */
+ delalloc_to_write += (delalloc_end - delalloc_start +
+ PAGE_CACHE_SIZE) >>
+ PAGE_CACHE_SHIFT;
delalloc_start = delalloc_end + 1;
}
+ if (wbc->nr_to_write < delalloc_to_write) {
+ int thresh = 8192;
+
+ if (delalloc_to_write < thresh * 2)
+ thresh = delalloc_to_write;
+ wbc->nr_to_write = min_t(u64, delalloc_to_write,
+ thresh);
+ }
/* did the fill delalloc function already unlock and start
* the IO?
goto done_unlocked;
}
}
- lock_extent(tree, start, page_end, GFP_NOFS);
-
- unlock_start = start;
-
if (tree->ops && tree->ops->writepage_start_hook) {
ret = tree->ops->writepage_start_hook(page, start,
page_end);
if (ret == -EAGAIN) {
- unlock_extent(tree, start, page_end, GFP_NOFS);
redirty_page_for_writepage(wbc, page);
update_nr_written(page, wbc, nr_written);
unlock_page(page);
update_nr_written(page, wbc, nr_written + 1);
end = page_end;
- if (test_range_bit(tree, start, page_end, EXTENT_DELALLOC, 0))
- printk(KERN_ERR "btrfs delalloc bits after lock_extent\n");
-
if (last_byte <= start) {
- clear_extent_dirty(tree, start, page_end, GFP_NOFS);
- unlock_extent(tree, start, page_end, GFP_NOFS);
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, start,
page_end, NULL, 1);
goto done;
}
- set_extent_uptodate(tree, start, page_end, GFP_NOFS);
blocksize = inode->i_sb->s_blocksize;
while (cur <= end) {
if (cur >= last_byte) {
- clear_extent_dirty(tree, cur, page_end, GFP_NOFS);
- unlock_extent(tree, unlock_start, page_end, GFP_NOFS);
if (tree->ops && tree->ops->writepage_end_io_hook)
tree->ops->writepage_end_io_hook(page, cur,
page_end, NULL, 1);
*/
if (compressed || block_start == EXTENT_MAP_HOLE ||
block_start == EXTENT_MAP_INLINE) {
- clear_extent_dirty(tree, cur,
- cur + iosize - 1, GFP_NOFS);
-
- unlock_extent(tree, unlock_start, cur + iosize - 1,
- GFP_NOFS);
-
/*
* end_io notification does not happen here for
* compressed extents
}
/* leave this out until we have a page_mkwrite call */
if (0 && !test_range_bit(tree, cur, cur + iosize - 1,
- EXTENT_DIRTY, 0)) {
+ EXTENT_DIRTY, 0, NULL)) {
cur = cur + iosize;
pg_offset += iosize;
continue;
}
- clear_extent_dirty(tree, cur, cur + iosize - 1, GFP_NOFS);
if (tree->ops && tree->ops->writepage_io_hook) {
ret = tree->ops->writepage_io_hook(page, cur,
cur + iosize - 1);
set_page_writeback(page);
end_page_writeback(page);
}
- if (unlock_start <= page_end)
- unlock_extent(tree, unlock_start, page_end, GFP_NOFS);
unlock_page(page);
done_unlocked:
+ /* drop our reference on any cached states */
+ free_extent_state(cached_state);
return 0;
}
writepage_t writepage, void *data,
void (*flush_fn)(void *))
{
- struct backing_dev_info *bdi = mapping->backing_dev_info;
int ret = 0;
int done = 0;
+ int nr_to_write_done = 0;
struct pagevec pvec;
int nr_pages;
pgoff_t index;
scanned = 1;
}
retry:
- while (!done && (index <= end) &&
+ while (!done && !nr_to_write_done && (index <= end) &&
(nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
PAGECACHE_TAG_DIRTY, min(end - index,
(pgoff_t)PAGEVEC_SIZE-1) + 1))) {
unlock_page(page);
ret = 0;
}
- if (ret || wbc->nr_to_write <= 0)
- done = 1;
- if (wbc->nonblocking && bdi_write_congested(bdi)) {
- wbc->encountered_congestion = 1;
+ if (ret)
done = 1;
- }
+
+ /*
+ * the filesystem may choose to bump up nr_to_write.
+ * We have to make sure to honor the new nr_to_write
+ * at any time
+ */
+ nr_to_write_done = wbc->nr_to_write <= 0;
}
pagevec_release(&pvec);
cond_resched();
return 0;
lock_extent(tree, start, end, GFP_NOFS);
- wait_on_extent_writeback(tree, start, end);
+ wait_on_page_writeback(page);
clear_extent_bit(tree, start, end,
- EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC,
- 1, 1, GFP_NOFS);
+ EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC |
+ EXTENT_DO_ACCOUNTING,
+ 1, 1, NULL, GFP_NOFS);
return 0;
}
!isnew && !PageUptodate(page) &&
(block_off_end > to || block_off_start < from) &&
!test_range_bit(tree, block_start, cur_end,
- EXTENT_UPTODATE, 1)) {
+ EXTENT_UPTODATE, 1, NULL)) {
u64 sector;
u64 extent_offset = block_start - em->start;
size_t iosize;
*/
set_extent_bit(tree, block_start,
block_start + iosize - 1,
- EXTENT_LOCKED, 0, NULL, GFP_NOFS);
+ EXTENT_LOCKED, 0, NULL, NULL, GFP_NOFS);
ret = submit_extent_page(READ, tree, page,
sector, iosize, page_offset, em->bdev,
NULL, 1,
int ret = 1;
if (test_range_bit(tree, start, end,
- EXTENT_IOBITS | EXTENT_ORDERED, 0))
+ EXTENT_IOBITS, 0, NULL))
ret = 0;
else {
if ((mask & GFP_NOFS) == GFP_NOFS)
mask = GFP_NOFS;
- clear_extent_bit(tree, start, end, EXTENT_UPTODATE,
- 1, 1, mask);
+ /*
+ * at this point we can safely clear everything except the
+ * locked bit and the nodatasum bit
+ */
+ clear_extent_bit(tree, start, end,
+ ~(EXTENT_LOCKED | EXTENT_NODATASUM),
+ 0, 0, NULL, mask);
}
return ret;
}
u64 len;
while (start <= end) {
len = end - start + 1;
- spin_lock(&map->lock);
+ write_lock(&map->lock);
em = lookup_extent_mapping(map, start, len);
if (!em || IS_ERR(em)) {
- spin_unlock(&map->lock);
+ write_unlock(&map->lock);
break;
}
if (test_bit(EXTENT_FLAG_PINNED, &em->flags) ||
em->start != start) {
- spin_unlock(&map->lock);
+ write_unlock(&map->lock);
free_extent_map(em);
break;
}
if (!test_range_bit(tree, em->start,
extent_map_end(em) - 1,
- EXTENT_LOCKED | EXTENT_WRITEBACK |
- EXTENT_ORDERED,
- 0)) {
+ EXTENT_LOCKED | EXTENT_WRITEBACK,
+ 0, NULL)) {
remove_extent_mapping(map, em);
/* once for the rb tree */
free_extent_map(em);
}
start = extent_map_end(em);
- spin_unlock(&map->lock);
+ write_unlock(&map->lock);
/* once for us */
free_extent_map(em);
int uptodate;
unsigned long index;
- ret = test_range_bit(tree, start, end, EXTENT_UPTODATE, 1);
+ ret = test_range_bit(tree, start, end, EXTENT_UPTODATE, 1, NULL);
if (ret)
return 1;
while (start <= end) {
return 1;
ret = test_range_bit(tree, eb->start, eb->start + eb->len - 1,
- EXTENT_UPTODATE, 1);
+ EXTENT_UPTODATE, 1, NULL);
if (ret)
return ret;
return 0;
if (test_range_bit(tree, eb->start, eb->start + eb->len - 1,
- EXTENT_UPTODATE, 1)) {
+ EXTENT_UPTODATE, 1, NULL)) {
return 0;
}
#define EXTENT_DEFRAG (1 << 6)
#define EXTENT_DEFRAG_DONE (1 << 7)
#define EXTENT_BUFFER_FILLED (1 << 8)
-#define EXTENT_ORDERED (1 << 9)
-#define EXTENT_ORDERED_METADATA (1 << 10)
-#define EXTENT_BOUNDARY (1 << 11)
-#define EXTENT_NODATASUM (1 << 12)
+#define EXTENT_BOUNDARY (1 << 9)
+#define EXTENT_NODATASUM (1 << 10)
+#define EXTENT_DO_ACCOUNTING (1 << 11)
#define EXTENT_IOBITS (EXTENT_LOCKED | EXTENT_WRITEBACK)
/* flags for bio submission */
#define EXTENT_BUFFER_BLOCKING 1
#define EXTENT_BUFFER_DIRTY 2
+/* these are flags for extent_clear_unlock_delalloc */
+#define EXTENT_CLEAR_UNLOCK_PAGE 0x1
+#define EXTENT_CLEAR_UNLOCK 0x2
+#define EXTENT_CLEAR_DELALLOC 0x4
+#define EXTENT_CLEAR_DIRTY 0x8
+#define EXTENT_SET_WRITEBACK 0x10
+#define EXTENT_END_WRITEBACK 0x20
+#define EXTENT_SET_PRIVATE2 0x40
+#define EXTENT_CLEAR_ACCOUNTING 0x80
+
/*
* page->private values. Every page that is controlled by the extent
* map has page->private set to one.
struct extent_state *state, int uptodate);
int (*set_bit_hook)(struct inode *inode, u64 start, u64 end,
unsigned long old, unsigned long bits);
- int (*clear_bit_hook)(struct inode *inode, u64 start, u64 end,
- unsigned long old, unsigned long bits);
+ int (*clear_bit_hook)(struct inode *inode, struct extent_state *state,
+ unsigned long bits);
+ int (*merge_extent_hook)(struct inode *inode,
+ struct extent_state *new,
+ struct extent_state *other);
+ int (*split_extent_hook)(struct inode *inode,
+ struct extent_state *orig, u64 split);
int (*write_cache_pages_lock_hook)(struct page *page);
};
u64 start;
u64 end; /* inclusive */
struct rb_node rb_node;
+
+ /* ADD NEW ELEMENTS AFTER THIS */
struct extent_io_tree *tree;
wait_queue_head_t wq;
atomic_t refs;
unsigned long state;
+ u64 split_start;
+ u64 split_end;
/* for use by the FS */
u64 private;
struct extent_io_tree *tree, struct page *page,
gfp_t mask);
int lock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask);
+int lock_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
+ int bits, struct extent_state **cached, gfp_t mask);
int unlock_extent(struct extent_io_tree *tree, u64 start, u64 end, gfp_t mask);
int try_lock_extent(struct extent_io_tree *tree, u64 start, u64 end,
gfp_t mask);
u64 max_bytes, unsigned long bits);
int test_range_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int filled);
+ int bits, int filled, struct extent_state *cached_state);
int clear_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask);
int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end,
- int bits, int wake, int delete, gfp_t mask);
+ int bits, int wake, int delete, struct extent_state **cached,
+ gfp_t mask);
int set_extent_bits(struct extent_io_tree *tree, u64 start, u64 end,
int bits, gfp_t mask);
int set_extent_uptodate(struct extent_io_tree *tree, u64 start, u64 end,
int extent_clear_unlock_delalloc(struct inode *inode,
struct extent_io_tree *tree,
u64 start, u64 end, struct page *locked_page,
- int unlock_page,
- int clear_unlock,
- int clear_delalloc, int clear_dirty,
- int set_writeback,
- int end_writeback);
+ unsigned long op);
#endif
void extent_map_tree_init(struct extent_map_tree *tree, gfp_t mask)
{
tree->map.rb_node = NULL;
- spin_lock_init(&tree->lock);
+ rwlock_init(&tree->lock);
}
/**
return 0;
}
+int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len)
+{
+ int ret = 0;
+ struct extent_map *merge = NULL;
+ struct rb_node *rb;
+ struct extent_map *em;
+
+ write_lock(&tree->lock);
+ em = lookup_extent_mapping(tree, start, len);
+
+ WARN_ON(em->start != start || !em);
+
+ if (!em)
+ goto out;
+
+ clear_bit(EXTENT_FLAG_PINNED, &em->flags);
+
+ if (em->start != 0) {
+ rb = rb_prev(&em->rb_node);
+ if (rb)
+ merge = rb_entry(rb, struct extent_map, rb_node);
+ if (rb && mergable_maps(merge, em)) {
+ em->start = merge->start;
+ em->len += merge->len;
+ em->block_len += merge->block_len;
+ em->block_start = merge->block_start;
+ merge->in_tree = 0;
+ rb_erase(&merge->rb_node, &tree->map);
+ free_extent_map(merge);
+ }
+ }
+
+ rb = rb_next(&em->rb_node);
+ if (rb)
+ merge = rb_entry(rb, struct extent_map, rb_node);
+ if (rb && mergable_maps(em, merge)) {
+ em->len += merge->len;
+ em->block_len += merge->len;
+ rb_erase(&merge->rb_node, &tree->map);
+ merge->in_tree = 0;
+ free_extent_map(merge);
+ }
+
+ free_extent_map(em);
+out:
+ write_unlock(&tree->lock);
+ return ret;
+
+}
+
/**
* add_extent_mapping - add new extent map to the extent tree
* @tree: tree to insert new map in
ret = -EEXIST;
goto out;
}
- assert_spin_locked(&tree->lock);
rb = tree_insert(&tree->map, em->start, &em->rb_node);
if (rb) {
ret = -EEXIST;
struct rb_node *next = NULL;
u64 end = range_end(start, len);
- assert_spin_locked(&tree->lock);
rb_node = __tree_search(&tree->map, start, &prev, &next);
if (!rb_node && prev) {
em = rb_entry(prev, struct extent_map, rb_node);
return em;
}
+/**
+ * search_extent_mapping - find a nearby extent map
+ * @tree: tree to lookup in
+ * @start: byte offset to start the search
+ * @len: length of the lookup range
+ *
+ * Find and return the first extent_map struct in @tree that intersects the
+ * [start, len] range.
+ *
+ * If one can't be found, any nearby extent may be returned
+ */
+struct extent_map *search_extent_mapping(struct extent_map_tree *tree,
+ u64 start, u64 len)
+{
+ struct extent_map *em;
+ struct rb_node *rb_node;
+ struct rb_node *prev = NULL;
+ struct rb_node *next = NULL;
+
+ rb_node = __tree_search(&tree->map, start, &prev, &next);
+ if (!rb_node && prev) {
+ em = rb_entry(prev, struct extent_map, rb_node);
+ goto found;
+ }
+ if (!rb_node && next) {
+ em = rb_entry(next, struct extent_map, rb_node);
+ goto found;
+ }
+ if (!rb_node) {
+ em = NULL;
+ goto out;
+ }
+ if (IS_ERR(rb_node)) {
+ em = ERR_PTR(PTR_ERR(rb_node));
+ goto out;
+ }
+ em = rb_entry(rb_node, struct extent_map, rb_node);
+ goto found;
+
+ em = NULL;
+ goto out;
+
+found:
+ atomic_inc(&em->refs);
+out:
+ return em;
+}
+
/**
* remove_extent_mapping - removes an extent_map from the extent tree
* @tree: extent tree to remove from
int ret = 0;
WARN_ON(test_bit(EXTENT_FLAG_PINNED, &em->flags));
- assert_spin_locked(&tree->lock);
rb_erase(&em->rb_node, &tree->map);
em->in_tree = 0;
return ret;
struct extent_map_tree {
struct rb_root map;
- spinlock_t lock;
+ rwlock_t lock;
};
static inline u64 extent_map_end(struct extent_map *em)
void free_extent_map(struct extent_map *em);
int __init extent_map_init(void);
void extent_map_exit(void);
+int unpin_extent_cache(struct extent_map_tree *tree, u64 start, u64 len);
+struct extent_map *search_extent_mapping(struct extent_map_tree *tree,
+ u64 start, u64 len);
#endif
int err = 0;
int i;
struct inode *inode = fdentry(file)->d_inode;
- struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
- u64 hint_byte;
u64 num_bytes;
u64 start_pos;
u64 end_of_last_block;
root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
end_of_last_block = start_pos + num_bytes - 1;
+ err = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block);
+ if (err)
+ return err;
- lock_extent(io_tree, start_pos, end_of_last_block, GFP_NOFS);
- trans = btrfs_join_transaction(root, 1);
- if (!trans) {
- err = -ENOMEM;
- goto out_unlock;
- }
- btrfs_set_trans_block_group(trans, inode);
- hint_byte = 0;
-
- set_extent_uptodate(io_tree, start_pos, end_of_last_block, GFP_NOFS);
-
- /* check for reserved extents on each page, we don't want
- * to reset the delalloc bit on things that already have
- * extents reserved.
- */
- btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block);
for (i = 0; i < num_pages; i++) {
struct page *p = pages[i];
SetPageUptodate(p);
* at this time.
*/
}
- err = btrfs_end_transaction(trans, root);
-out_unlock:
- unlock_extent(io_tree, start_pos, end_of_last_block, GFP_NOFS);
return err;
}
if (!split2)
split2 = alloc_extent_map(GFP_NOFS);
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, len);
if (!em) {
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
break;
}
flags = em->flags;
if (skip_pinned && test_bit(EXTENT_FLAG_PINNED, &em->flags)) {
- spin_unlock(&em_tree->lock);
if (em->start <= start &&
(!testend || em->start + em->len >= start + len)) {
free_extent_map(em);
+ write_unlock(&em_tree->lock);
break;
}
if (start < em->start) {
start = em->start + em->len;
}
free_extent_map(em);
+ write_unlock(&em_tree->lock);
continue;
}
compressed = test_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
free_extent_map(split);
split = NULL;
}
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
/* once for us */
free_extent_map(em);
noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
u64 start, u64 end, u64 locked_end,
- u64 inline_limit, u64 *hint_byte)
+ u64 inline_limit, u64 *hint_byte, int drop_cache)
{
u64 extent_end = 0;
u64 search_start = start;
int ret;
inline_limit = 0;
- btrfs_drop_extent_cache(inode, start, end - 1, 0);
+ if (drop_cache)
+ btrfs_drop_extent_cache(inode, start, end - 1, 0);
path = btrfs_alloc_path();
if (!path)
btrfs_put_ordered_extent(ordered);
clear_extent_bits(&BTRFS_I(inode)->io_tree, start_pos,
- last_pos - 1, EXTENT_DIRTY | EXTENT_DELALLOC,
+ last_pos - 1, EXTENT_DIRTY | EXTENT_DELALLOC |
+ EXTENT_DO_ACCOUNTING,
GFP_NOFS);
unlock_extent(&BTRFS_I(inode)->io_tree,
start_pos, last_pos - 1, GFP_NOFS);
start_pos = pos;
vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
+
+ /* do the reserve before the mutex lock in case we have to do some
+ * flushing. We wouldn't deadlock, but this is more polite.
+ */
+ err = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+ if (err)
+ goto out_nolock;
+
+ mutex_lock(&inode->i_mutex);
+
current->backing_dev_info = inode->i_mapping->backing_dev_info;
err = generic_write_checks(file, &pos, &count, S_ISBLK(inode->i_mode));
if (err)
- goto out_nolock;
+ goto out;
+
if (count == 0)
- goto out_nolock;
+ goto out;
err = file_remove_suid(file);
if (err)
- goto out_nolock;
+ goto out;
+
file_update_time(file);
pages = kmalloc(nrptrs * sizeof(struct page *), GFP_KERNEL);
- mutex_lock(&inode->i_mutex);
+ /* generic_write_checks can change our pos */
+ start_pos = pos;
+
BTRFS_I(inode)->sequence++;
first_index = pos >> PAGE_CACHE_SHIFT;
last_index = (pos + count) >> PAGE_CACHE_SHIFT;
}
if (will_write) {
- btrfs_fdatawrite_range(inode->i_mapping, pos,
- pos + write_bytes - 1,
- WB_SYNC_ALL);
+ filemap_fdatawrite_range(inode->i_mapping, pos,
+ pos + write_bytes - 1);
} else {
balance_dirty_pages_ratelimited_nr(inode->i_mapping,
num_pages);
mutex_unlock(&inode->i_mutex);
if (ret)
err = ret;
+ btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
out_nolock:
kfree(pages);
btrfs_end_transaction(trans, root);
else
btrfs_commit_transaction(trans, root);
- } else {
+ } else if (ret != BTRFS_NO_LOG_SYNC) {
btrfs_commit_transaction(trans, root);
+ } else {
+ btrfs_end_transaction(trans, root);
}
}
if (file->f_flags & O_DIRECT) {
int ret = 0;
struct btrfs_trans_handle *trans;
+
+ /* we wait first, since the writeback may change the inode */
+ root->log_batch++;
+ /* the VFS called filemap_fdatawrite for us */
+ btrfs_wait_ordered_range(inode, 0, (u64)-1);
+ root->log_batch++;
+
/*
* check the transaction that last modified this inode
* and see if its already been committed
if (!BTRFS_I(inode)->last_trans)
goto out;
+ /*
+ * if the last transaction that changed this file was before
+ * the current transaction, we can bail out now without any
+ * syncing
+ */
mutex_lock(&root->fs_info->trans_mutex);
if (BTRFS_I(inode)->last_trans <=
root->fs_info->last_trans_committed) {
}
mutex_unlock(&root->fs_info->trans_mutex);
- root->log_batch++;
- filemap_fdatawrite(inode->i_mapping);
- btrfs_wait_ordered_range(inode, 0, (u64)-1);
- root->log_batch++;
-
- if (datasync && !(inode->i_state & I_DIRTY_PAGES))
- goto out;
/*
* ok we haven't committed the transaction yet, lets do a commit
*/
*/
mutex_unlock(&dentry->d_inode->i_mutex);
- if (ret > 0) {
- ret = btrfs_commit_transaction(trans, root);
- } else {
- ret = btrfs_sync_log(trans, root);
- if (ret == 0)
- ret = btrfs_end_transaction(trans, root);
- else
+ if (ret != BTRFS_NO_LOG_SYNC) {
+ if (ret > 0) {
ret = btrfs_commit_transaction(trans, root);
+ } else {
+ ret = btrfs_sync_log(trans, root);
+ if (ret == 0)
+ ret = btrfs_end_transaction(trans, root);
+ else
+ ret = btrfs_commit_transaction(trans, root);
+ }
+ } else {
+ ret = btrfs_end_transaction(trans, root);
}
mutex_lock(&dentry->d_inode->i_mutex);
out:
return ret > 0 ? EIO : ret;
}
-static struct vm_operations_struct btrfs_file_vm_ops = {
+static const struct vm_operations_struct btrfs_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = btrfs_page_mkwrite,
};
return 0;
}
-struct file_operations btrfs_file_operations = {
+const struct file_operations btrfs_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
static void recalculate_thresholds(struct btrfs_block_group_cache *block_group)
{
- u64 max_bytes, possible_bytes;
+ u64 max_bytes;
+ u64 bitmap_bytes;
+ u64 extent_bytes;
/*
* The goal is to keep the total amount of memory used per 1gb of space
max_bytes = MAX_CACHE_BYTES_PER_GIG *
(div64_u64(block_group->key.offset, 1024 * 1024 * 1024));
- possible_bytes = (block_group->total_bitmaps * PAGE_CACHE_SIZE) +
- (sizeof(struct btrfs_free_space) *
- block_group->extents_thresh);
+ /*
+ * we want to account for 1 more bitmap than what we have so we can make
+ * sure we don't go over our overall goal of MAX_CACHE_BYTES_PER_GIG as
+ * we add more bitmaps.
+ */
+ bitmap_bytes = (block_group->total_bitmaps + 1) * PAGE_CACHE_SIZE;
- if (possible_bytes > max_bytes) {
- int extent_bytes = max_bytes -
- (block_group->total_bitmaps * PAGE_CACHE_SIZE);
+ if (bitmap_bytes >= max_bytes) {
+ block_group->extents_thresh = 0;
+ return;
+ }
- if (extent_bytes <= 0) {
- block_group->extents_thresh = 0;
- return;
- }
+ /*
+ * we want the extent entry threshold to always be at most 1/2 the maxw
+ * bytes we can have, or whatever is less than that.
+ */
+ extent_bytes = max_bytes - bitmap_bytes;
+ extent_bytes = min_t(u64, extent_bytes, div64_u64(max_bytes, 2));
- block_group->extents_thresh = extent_bytes /
- (sizeof(struct btrfs_free_space));
- }
+ block_group->extents_thresh =
+ div64_u64(extent_bytes, (sizeof(struct btrfs_free_space)));
}
static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group,
BUG_ON(block_group->total_bitmaps >= max_bitmaps);
info->offset = offset_to_bitmap(block_group, offset);
+ info->bytes = 0;
link_free_space(block_group, info);
block_group->total_bitmaps++;
ptr = (unsigned long)(ref + 1);
ret = 0;
} else if (ret < 0) {
+ if (ret == -EOVERFLOW)
+ ret = -EMLINK;
goto out;
} else {
ref = btrfs_item_ptr(path->nodes[0], path->slots[0],
ret = btrfs_insert_empty_item(trans, root, path, &key,
sizeof(struct btrfs_inode_item));
- if (ret == 0 && objectid > root->highest_inode)
- root->highest_inode = objectid;
return ret;
}
slot = path->slots[0] - 1;
l = path->nodes[0];
btrfs_item_key_to_cpu(l, &found_key, slot);
- *objectid = found_key.objectid;
+ *objectid = max_t(u64, found_key.objectid,
+ BTRFS_FIRST_FREE_OBJECTID - 1);
} else {
- *objectid = BTRFS_FIRST_FREE_OBJECTID;
+ *objectid = BTRFS_FIRST_FREE_OBJECTID - 1;
}
ret = 0;
error:
return ret;
}
-/*
- * walks the btree of allocated inodes and find a hole.
- */
int btrfs_find_free_objectid(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 dirid, u64 *objectid)
{
- struct btrfs_path *path;
- struct btrfs_key key;
int ret;
- int slot = 0;
- u64 last_ino = 0;
- int start_found;
- struct extent_buffer *l;
- struct btrfs_key search_key;
- u64 search_start = dirid;
-
mutex_lock(&root->objectid_mutex);
- if (root->last_inode_alloc >= BTRFS_FIRST_FREE_OBJECTID &&
- root->last_inode_alloc < BTRFS_LAST_FREE_OBJECTID) {
- *objectid = ++root->last_inode_alloc;
- mutex_unlock(&root->objectid_mutex);
- return 0;
- }
- path = btrfs_alloc_path();
- BUG_ON(!path);
- search_start = max(search_start, (u64)BTRFS_FIRST_FREE_OBJECTID);
- search_key.objectid = search_start;
- search_key.type = 0;
- search_key.offset = 0;
-
- start_found = 0;
- ret = btrfs_search_slot(trans, root, &search_key, path, 0, 0);
- if (ret < 0)
- goto error;
- while (1) {
- l = path->nodes[0];
- slot = path->slots[0];
- if (slot >= btrfs_header_nritems(l)) {
- ret = btrfs_next_leaf(root, path);
- if (ret == 0)
- continue;
- if (ret < 0)
- goto error;
- if (!start_found) {
- *objectid = search_start;
- start_found = 1;
- goto found;
- }
- *objectid = last_ino > search_start ?
- last_ino : search_start;
- goto found;
- }
- btrfs_item_key_to_cpu(l, &key, slot);
- if (key.objectid >= search_start) {
- if (start_found) {
- if (last_ino < search_start)
- last_ino = search_start;
- if (key.objectid > last_ino) {
- *objectid = last_ino;
- goto found;
- }
- } else if (key.objectid > search_start) {
- *objectid = search_start;
- goto found;
- }
- }
- if (key.objectid >= BTRFS_LAST_FREE_OBJECTID)
- break;
+ if (unlikely(root->highest_objectid < BTRFS_FIRST_FREE_OBJECTID)) {
+ ret = btrfs_find_highest_inode(root, &root->highest_objectid);
+ if (ret)
+ goto out;
+ }
- start_found = 1;
- last_ino = key.objectid + 1;
- path->slots[0]++;
+ if (unlikely(root->highest_objectid >= BTRFS_LAST_FREE_OBJECTID)) {
+ ret = -ENOSPC;
+ goto out;
}
- BUG_ON(1);
-found:
- btrfs_release_path(root, path);
- btrfs_free_path(path);
- BUG_ON(*objectid < search_start);
- mutex_unlock(&root->objectid_mutex);
- return 0;
-error:
- btrfs_release_path(root, path);
- btrfs_free_path(path);
+
+ *objectid = ++root->highest_objectid;
+ ret = 0;
+out:
mutex_unlock(&root->objectid_mutex);
return ret;
}
static const struct inode_operations btrfs_file_inode_operations;
static const struct address_space_operations btrfs_aops;
static const struct address_space_operations btrfs_symlink_aops;
-static struct file_operations btrfs_dir_file_operations;
+static const struct file_operations btrfs_dir_file_operations;
static struct extent_io_ops btrfs_extent_io_ops;
static struct kmem_cache *btrfs_inode_cachep;
}
ret = btrfs_drop_extents(trans, root, inode, start,
- aligned_end, aligned_end, start, &hint_byte);
+ aligned_end, aligned_end, start,
+ &hint_byte, 1);
BUG_ON(ret);
if (isize > actual_end)
inline_len, compressed_size,
compressed_pages);
BUG_ON(ret);
- btrfs_drop_extent_cache(inode, start, aligned_end, 0);
+ btrfs_drop_extent_cache(inode, start, aligned_end - 1, 0);
return 0;
}
* and free up our temp pages.
*/
extent_clear_unlock_delalloc(inode,
- &BTRFS_I(inode)->io_tree,
- start, end, NULL, 1, 0,
- 0, 1, 1, 1);
+ &BTRFS_I(inode)->io_tree,
+ start, end, NULL,
+ EXTENT_CLEAR_UNLOCK_PAGE | EXTENT_CLEAR_DIRTY |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_ACCOUNTING |
+ EXTENT_SET_WRITEBACK | EXTENT_END_WRITEBACK);
ret = 0;
goto free_pages_out;
}
set_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
while (1) {
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret != -EEXIST) {
free_extent_map(em);
break;
* clear dirty, set writeback and unlock the pages.
*/
extent_clear_unlock_delalloc(inode,
- &BTRFS_I(inode)->io_tree,
- async_extent->start,
- async_extent->start +
- async_extent->ram_size - 1,
- NULL, 1, 1, 0, 1, 1, 0);
+ &BTRFS_I(inode)->io_tree,
+ async_extent->start,
+ async_extent->start +
+ async_extent->ram_size - 1,
+ NULL, EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_DIRTY | EXTENT_SET_WRITEBACK);
ret = btrfs_submit_compressed_write(inode,
async_extent->start,
start, end, 0, NULL);
if (ret == 0) {
extent_clear_unlock_delalloc(inode,
- &BTRFS_I(inode)->io_tree,
- start, end, NULL, 1, 1,
- 1, 1, 1, 1);
+ &BTRFS_I(inode)->io_tree,
+ start, end, NULL,
+ EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK |
+ EXTENT_CLEAR_DELALLOC |
+ EXTENT_CLEAR_ACCOUNTING |
+ EXTENT_CLEAR_DIRTY |
+ EXTENT_SET_WRITEBACK |
+ EXTENT_END_WRITEBACK);
*nr_written = *nr_written +
(end - start + PAGE_CACHE_SIZE) / PAGE_CACHE_SIZE;
*page_started = 1;
BUG_ON(disk_num_bytes >
btrfs_super_total_bytes(&root->fs_info->super_copy));
+
+ read_lock(&BTRFS_I(inode)->extent_tree.lock);
+ em = search_extent_mapping(&BTRFS_I(inode)->extent_tree,
+ start, num_bytes);
+ if (em) {
+ alloc_hint = em->block_start;
+ free_extent_map(em);
+ }
+ read_unlock(&BTRFS_I(inode)->extent_tree.lock);
btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
while (disk_num_bytes > 0) {
+ unsigned long op;
+
cur_alloc_size = min(disk_num_bytes, root->fs_info->max_extent);
ret = btrfs_reserve_extent(trans, root, cur_alloc_size,
root->sectorsize, 0, alloc_hint,
em = alloc_extent_map(GFP_NOFS);
em->start = start;
em->orig_start = em->start;
-
ram_size = ins.offset;
em->len = ins.offset;
set_bit(EXTENT_FLAG_PINNED, &em->flags);
while (1) {
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret != -EEXIST) {
free_extent_map(em);
break;
/* we're not doing compressed IO, don't unlock the first
* page (which the caller expects to stay locked), don't
* clear any dirty bits and don't set any writeback bits
+ *
+ * Do set the Private2 bit so we know this page was properly
+ * setup for writepage
*/
+ op = unlock ? EXTENT_CLEAR_UNLOCK_PAGE : 0;
+ op |= EXTENT_CLEAR_UNLOCK | EXTENT_CLEAR_DELALLOC |
+ EXTENT_SET_PRIVATE2;
+
extent_clear_unlock_delalloc(inode, &BTRFS_I(inode)->io_tree,
start, start + ram_size - 1,
- locked_page, unlock, 1,
- 1, 0, 0, 0);
+ locked_page, op);
disk_num_bytes -= cur_alloc_size;
num_bytes -= cur_alloc_size;
alloc_hint = ins.objectid + ins.offset;
u64 cur_end;
int limit = 10 * 1024 * 1042;
- clear_extent_bit(&BTRFS_I(inode)->io_tree, start, end, EXTENT_LOCKED |
- EXTENT_DELALLOC, 1, 0, GFP_NOFS);
+ clear_extent_bit(&BTRFS_I(inode)->io_tree, start, end, EXTENT_LOCKED,
+ 1, 0, NULL, GFP_NOFS);
while (start < end) {
async_cow = kmalloc(sizeof(*async_cow), GFP_NOFS);
async_cow->inode = inode;
if (found_key.offset > cur_offset) {
extent_end = found_key.offset;
+ extent_type = 0;
goto out_check;
}
em->bdev = root->fs_info->fs_devices->latest_bdev;
set_bit(EXTENT_FLAG_PINNED, &em->flags);
while (1) {
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
if (ret != -EEXIST) {
free_extent_map(em);
break;
BUG_ON(ret);
extent_clear_unlock_delalloc(inode, &BTRFS_I(inode)->io_tree,
- cur_offset, cur_offset + num_bytes - 1,
- locked_page, 1, 1, 1, 0, 0, 0);
+ cur_offset, cur_offset + num_bytes - 1,
+ locked_page, EXTENT_CLEAR_UNLOCK_PAGE |
+ EXTENT_CLEAR_UNLOCK | EXTENT_CLEAR_DELALLOC |
+ EXTENT_SET_PRIVATE2);
cur_offset = extent_end;
if (cur_offset > end)
break;
return ret;
}
+static int btrfs_split_extent_hook(struct inode *inode,
+ struct extent_state *orig, u64 split)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 size;
+
+ if (!(orig->state & EXTENT_DELALLOC))
+ return 0;
+
+ size = orig->end - orig->start + 1;
+ if (size > root->fs_info->max_extent) {
+ u64 num_extents;
+ u64 new_size;
+
+ new_size = orig->end - split + 1;
+ num_extents = div64_u64(size + root->fs_info->max_extent - 1,
+ root->fs_info->max_extent);
+
+ /*
+ * if we break a large extent up then leave oustanding_extents
+ * be, since we've already accounted for the large extent.
+ */
+ if (div64_u64(new_size + root->fs_info->max_extent - 1,
+ root->fs_info->max_extent) < num_extents)
+ return 0;
+ }
+
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ BTRFS_I(inode)->outstanding_extents++;
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
+
+ return 0;
+}
+
+/*
+ * extent_io.c merge_extent_hook, used to track merged delayed allocation
+ * extents so we can keep track of new extents that are just merged onto old
+ * extents, such as when we are doing sequential writes, so we can properly
+ * account for the metadata space we'll need.
+ */
+static int btrfs_merge_extent_hook(struct inode *inode,
+ struct extent_state *new,
+ struct extent_state *other)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ u64 new_size, old_size;
+ u64 num_extents;
+
+ /* not delalloc, ignore it */
+ if (!(other->state & EXTENT_DELALLOC))
+ return 0;
+
+ old_size = other->end - other->start + 1;
+ if (new->start < other->start)
+ new_size = other->end - new->start + 1;
+ else
+ new_size = new->end - other->start + 1;
+
+ /* we're not bigger than the max, unreserve the space and go */
+ if (new_size <= root->fs_info->max_extent) {
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ BTRFS_I(inode)->outstanding_extents--;
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
+ return 0;
+ }
+
+ /*
+ * If we grew by another max_extent, just return, we want to keep that
+ * reserved amount.
+ */
+ num_extents = div64_u64(old_size + root->fs_info->max_extent - 1,
+ root->fs_info->max_extent);
+ if (div64_u64(new_size + root->fs_info->max_extent - 1,
+ root->fs_info->max_extent) > num_extents)
+ return 0;
+
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ BTRFS_I(inode)->outstanding_extents--;
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
+
+ return 0;
+}
+
/*
* extent_io.c set_bit_hook, used to track delayed allocation
* bytes in this file, and to maintain the list of inodes that
static int btrfs_set_bit_hook(struct inode *inode, u64 start, u64 end,
unsigned long old, unsigned long bits)
{
+
/*
* set_bit and clear bit hooks normally require _irqsave/restore
* but in this case, we are only testeing for the DELALLOC
*/
if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
struct btrfs_root *root = BTRFS_I(inode)->root;
+
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ BTRFS_I(inode)->outstanding_extents++;
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
btrfs_delalloc_reserve_space(root, inode, end - start + 1);
spin_lock(&root->fs_info->delalloc_lock);
BTRFS_I(inode)->delalloc_bytes += end - start + 1;
/*
* extent_io.c clear_bit_hook, see set_bit_hook for why
*/
-static int btrfs_clear_bit_hook(struct inode *inode, u64 start, u64 end,
- unsigned long old, unsigned long bits)
+static int btrfs_clear_bit_hook(struct inode *inode,
+ struct extent_state *state, unsigned long bits)
{
/*
* set_bit and clear bit hooks normally require _irqsave/restore
* but in this case, we are only testeing for the DELALLOC
* bit, which is only set or cleared with irqs on
*/
- if ((old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
+ if ((state->state & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
struct btrfs_root *root = BTRFS_I(inode)->root;
+ if (bits & EXTENT_DO_ACCOUNTING) {
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ BTRFS_I(inode)->outstanding_extents--;
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
+ btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
+ }
+
spin_lock(&root->fs_info->delalloc_lock);
- if (end - start + 1 > root->fs_info->delalloc_bytes) {
+ if (state->end - state->start + 1 >
+ root->fs_info->delalloc_bytes) {
printk(KERN_INFO "btrfs warning: delalloc account "
"%llu %llu\n",
- (unsigned long long)end - start + 1,
+ (unsigned long long)
+ state->end - state->start + 1,
(unsigned long long)
root->fs_info->delalloc_bytes);
btrfs_delalloc_free_space(root, inode, (u64)-1);
BTRFS_I(inode)->delalloc_bytes = 0;
} else {
btrfs_delalloc_free_space(root, inode,
- end - start + 1);
- root->fs_info->delalloc_bytes -= end - start + 1;
- BTRFS_I(inode)->delalloc_bytes -= end - start + 1;
+ state->end -
+ state->start + 1);
+ root->fs_info->delalloc_bytes -= state->end -
+ state->start + 1;
+ BTRFS_I(inode)->delalloc_bytes -= state->end -
+ state->start + 1;
}
if (BTRFS_I(inode)->delalloc_bytes == 0 &&
!list_empty(&BTRFS_I(inode)->delalloc_inodes)) {
lock_extent(&BTRFS_I(inode)->io_tree, page_start, page_end, GFP_NOFS);
/* already ordered? We're done */
- if (test_range_bit(&BTRFS_I(inode)->io_tree, page_start, page_end,
- EXTENT_ORDERED, 0)) {
+ if (PagePrivate2(page))
goto out;
- }
ordered = btrfs_lookup_ordered_extent(inode, page_start);
if (ordered) {
struct inode *inode = page->mapping->host;
struct btrfs_writepage_fixup *fixup;
struct btrfs_root *root = BTRFS_I(inode)->root;
- int ret;
- ret = test_range_bit(&BTRFS_I(inode)->io_tree, start, end,
- EXTENT_ORDERED, 0);
- if (ret)
+ /* this page is properly in the ordered list */
+ if (TestClearPagePrivate2(page))
return 0;
if (PageChecked(page))
BUG_ON(!path);
path->leave_spinning = 1;
+
+ /*
+ * we may be replacing one extent in the tree with another.
+ * The new extent is pinned in the extent map, and we don't want
+ * to drop it from the cache until it is completely in the btree.
+ *
+ * So, tell btrfs_drop_extents to leave this extent in the cache.
+ * the caller is expected to unpin it and allow it to be merged
+ * with the others.
+ */
ret = btrfs_drop_extents(trans, root, inode, file_pos,
file_pos + num_bytes, locked_end,
- file_pos, &hint);
+ file_pos, &hint, 0);
BUG_ON(ret);
ins.objectid = inode->i_ino;
btrfs_mark_buffer_dirty(leaf);
inode_add_bytes(inode, num_bytes);
- btrfs_drop_extent_cache(inode, file_pos, file_pos + num_bytes - 1, 0);
ins.objectid = disk_bytenr;
ins.offset = disk_num_bytes;
ordered_extent->len,
compressed, 0, 0,
BTRFS_FILE_EXTENT_REG);
+ unpin_extent_cache(&BTRFS_I(inode)->extent_tree,
+ ordered_extent->file_offset,
+ ordered_extent->len);
BUG_ON(ret);
}
unlock_extent(io_tree, ordered_extent->file_offset,
static int btrfs_writepage_end_io_hook(struct page *page, u64 start, u64 end,
struct extent_state *state, int uptodate)
{
+ ClearPagePrivate2(page);
return btrfs_finish_ordered_io(page->mapping->host, start, end);
}
failrec->last_mirror = 0;
failrec->bio_flags = 0;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, failrec->len);
if (em->start > start || em->start + em->len < start) {
free_extent_map(em);
em = NULL;
}
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (!em || IS_ERR(em)) {
kfree(failrec);
return 0;
if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID &&
- test_range_bit(io_tree, start, end, EXTENT_NODATASUM, 1)) {
+ test_range_bit(io_tree, start, end, EXTENT_NODATASUM, 1, NULL)) {
clear_extent_bits(io_tree, start, end, EXTENT_NODATASUM,
GFP_NOFS);
return 0;
return ret;
}
+int btrfs_unlink_subvol(struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
+ struct inode *dir, u64 objectid,
+ const char *name, int name_len)
+{
+ struct btrfs_path *path;
+ struct extent_buffer *leaf;
+ struct btrfs_dir_item *di;
+ struct btrfs_key key;
+ u64 index;
+ int ret;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ di = btrfs_lookup_dir_item(trans, root, path, dir->i_ino,
+ name, name_len, -1);
+ BUG_ON(!di || IS_ERR(di));
+
+ leaf = path->nodes[0];
+ btrfs_dir_item_key_to_cpu(leaf, di, &key);
+ WARN_ON(key.type != BTRFS_ROOT_ITEM_KEY || key.objectid != objectid);
+ ret = btrfs_delete_one_dir_name(trans, root, path, di);
+ BUG_ON(ret);
+ btrfs_release_path(root, path);
+
+ ret = btrfs_del_root_ref(trans, root->fs_info->tree_root,
+ objectid, root->root_key.objectid,
+ dir->i_ino, &index, name, name_len);
+ if (ret < 0) {
+ BUG_ON(ret != -ENOENT);
+ di = btrfs_search_dir_index_item(root, path, dir->i_ino,
+ name, name_len);
+ BUG_ON(!di || IS_ERR(di));
+
+ leaf = path->nodes[0];
+ btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+ btrfs_release_path(root, path);
+ index = key.offset;
+ }
+
+ di = btrfs_lookup_dir_index_item(trans, root, path, dir->i_ino,
+ index, name, name_len, -1);
+ BUG_ON(!di || IS_ERR(di));
+
+ leaf = path->nodes[0];
+ btrfs_dir_item_key_to_cpu(leaf, di, &key);
+ WARN_ON(key.type != BTRFS_ROOT_ITEM_KEY || key.objectid != objectid);
+ ret = btrfs_delete_one_dir_name(trans, root, path, di);
+ BUG_ON(ret);
+ btrfs_release_path(root, path);
+
+ btrfs_i_size_write(dir, dir->i_size - name_len * 2);
+ dir->i_mtime = dir->i_ctime = CURRENT_TIME;
+ ret = btrfs_update_inode(trans, root, dir);
+ BUG_ON(ret);
+ dir->i_sb->s_dirt = 1;
+
+ btrfs_free_path(path);
+ return 0;
+}
+
static int btrfs_rmdir(struct inode *dir, struct dentry *dentry)
{
struct inode *inode = dentry->d_inode;
struct btrfs_trans_handle *trans;
unsigned long nr = 0;
- /*
- * the FIRST_FREE_OBJECTID check makes sure we don't try to rmdir
- * the root of a subvolume or snapshot
- */
if (inode->i_size > BTRFS_EMPTY_DIR_SIZE ||
- inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
return -ENOTEMPTY;
- }
trans = btrfs_start_transaction(root, 1);
btrfs_set_trans_block_group(trans, dir);
+ if (unlikely(inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) {
+ err = btrfs_unlink_subvol(trans, root, dir,
+ BTRFS_I(inode)->location.objectid,
+ dentry->d_name.name,
+ dentry->d_name.len);
+ goto out;
+ }
+
err = btrfs_orphan_add(trans, inode);
if (err)
- goto fail_trans;
+ goto out;
/* now the directory is empty */
err = btrfs_unlink_inode(trans, root, dir, dentry->d_inode,
dentry->d_name.name, dentry->d_name.len);
if (!err)
btrfs_i_size_write(inode, 0);
-
-fail_trans:
+out:
nr = trans->blocks_used;
ret = btrfs_end_transaction_throttle(trans, root);
btrfs_btree_balance_dirty(root, nr);
if ((offset & (blocksize - 1)) == 0)
goto out;
+ ret = btrfs_check_data_free_space(root, inode, PAGE_CACHE_SIZE);
+ if (ret)
+ goto out;
+
+ ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+ if (ret)
+ goto out;
ret = -ENOMEM;
again:
page = grab_cache_page(mapping, index);
- if (!page)
+ if (!page) {
+ btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+ btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
goto out;
+ }
page_start = page_offset(page);
page_end = page_start + PAGE_CACHE_SIZE - 1;
goto again;
}
- btrfs_set_extent_delalloc(inode, page_start, page_end);
+ clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end,
+ EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING,
+ GFP_NOFS);
+
+ ret = btrfs_set_extent_delalloc(inode, page_start, page_end);
+ if (ret) {
+ unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+ goto out_unlock;
+ }
+
ret = 0;
if (offset != PAGE_CACHE_SIZE) {
kaddr = kmap(page);
unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
out_unlock:
+ if (ret)
+ btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+ btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
unlock_page(page);
page_cache_release(page);
out:
u64 last_byte;
u64 cur_offset;
u64 hole_size;
- int err;
+ int err = 0;
if (size <= hole_start)
return 0;
- err = btrfs_check_metadata_free_space(root);
+ err = btrfs_truncate_page(inode->i_mapping, inode->i_size);
if (err)
return err;
- btrfs_truncate_page(inode->i_mapping, inode->i_size);
-
while (1) {
struct btrfs_ordered_extent *ordered;
btrfs_wait_ordered_range(inode, hole_start,
cur_offset,
cur_offset + hole_size,
block_end,
- cur_offset, &hint_byte);
+ cur_offset, &hint_byte, 1);
+ if (err)
+ break;
+
+ err = btrfs_reserve_metadata_space(root, 1);
if (err)
break;
+
err = btrfs_insert_file_extent(trans, root,
inode->i_ino, cur_offset, 0,
0, hole_size, 0, hole_size,
0, 0, 0);
btrfs_drop_extent_cache(inode, hole_start,
last_byte - 1, 0);
+ btrfs_unreserve_metadata_space(root, 1);
}
free_extent_map(em);
cur_offset = last_byte;
}
btrfs_wait_ordered_range(inode, 0, (u64)-1);
+ if (inode->i_nlink > 0) {
+ BUG_ON(btrfs_root_refs(&root->root_item) != 0);
+ goto no_delete;
+ }
+
btrfs_i_size_write(inode, 0);
trans = btrfs_join_transaction(root, 1);
* is kind of like crossing a mount point.
*/
static int fixup_tree_root_location(struct btrfs_root *root,
- struct btrfs_key *location,
- struct btrfs_root **sub_root,
- struct dentry *dentry)
+ struct inode *dir,
+ struct dentry *dentry,
+ struct btrfs_key *location,
+ struct btrfs_root **sub_root)
{
- struct btrfs_root_item *ri;
+ struct btrfs_path *path;
+ struct btrfs_root *new_root;
+ struct btrfs_root_ref *ref;
+ struct extent_buffer *leaf;
+ int ret;
+ int err = 0;
- if (btrfs_key_type(location) != BTRFS_ROOT_ITEM_KEY)
- return 0;
- if (location->objectid == BTRFS_ROOT_TREE_OBJECTID)
- return 0;
+ path = btrfs_alloc_path();
+ if (!path) {
+ err = -ENOMEM;
+ goto out;
+ }
- *sub_root = btrfs_read_fs_root(root->fs_info, location,
- dentry->d_name.name,
- dentry->d_name.len);
- if (IS_ERR(*sub_root))
- return PTR_ERR(*sub_root);
+ err = -ENOENT;
+ ret = btrfs_find_root_ref(root->fs_info->tree_root, path,
+ BTRFS_I(dir)->root->root_key.objectid,
+ location->objectid);
+ if (ret) {
+ if (ret < 0)
+ err = ret;
+ goto out;
+ }
- ri = &(*sub_root)->root_item;
- location->objectid = btrfs_root_dirid(ri);
- btrfs_set_key_type(location, BTRFS_INODE_ITEM_KEY);
- location->offset = 0;
+ leaf = path->nodes[0];
+ ref = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_root_ref);
+ if (btrfs_root_ref_dirid(leaf, ref) != dir->i_ino ||
+ btrfs_root_ref_name_len(leaf, ref) != dentry->d_name.len)
+ goto out;
- return 0;
+ ret = memcmp_extent_buffer(leaf, dentry->d_name.name,
+ (unsigned long)(ref + 1),
+ dentry->d_name.len);
+ if (ret)
+ goto out;
+
+ btrfs_release_path(root->fs_info->tree_root, path);
+
+ new_root = btrfs_read_fs_root_no_name(root->fs_info, location);
+ if (IS_ERR(new_root)) {
+ err = PTR_ERR(new_root);
+ goto out;
+ }
+
+ if (btrfs_root_refs(&new_root->root_item) == 0) {
+ err = -ENOENT;
+ goto out;
+ }
+
+ *sub_root = new_root;
+ location->objectid = btrfs_root_dirid(&new_root->root_item);
+ location->type = BTRFS_INODE_ITEM_KEY;
+ location->offset = 0;
+ err = 0;
+out:
+ btrfs_free_path(path);
+ return err;
}
static void inode_tree_add(struct inode *inode)
struct btrfs_inode *entry;
struct rb_node **p;
struct rb_node *parent;
-
again:
p = &root->inode_tree.rb_node;
parent = NULL;
+ if (hlist_unhashed(&inode->i_hash))
+ return;
+
spin_lock(&root->inode_lock);
while (*p) {
parent = *p;
static void inode_tree_del(struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
+ int empty = 0;
spin_lock(&root->inode_lock);
if (!RB_EMPTY_NODE(&BTRFS_I(inode)->rb_node)) {
rb_erase(&BTRFS_I(inode)->rb_node, &root->inode_tree);
RB_CLEAR_NODE(&BTRFS_I(inode)->rb_node);
+ empty = RB_EMPTY_ROOT(&root->inode_tree);
}
spin_unlock(&root->inode_lock);
+
+ if (empty && btrfs_root_refs(&root->root_item) == 0) {
+ synchronize_srcu(&root->fs_info->subvol_srcu);
+ spin_lock(&root->inode_lock);
+ empty = RB_EMPTY_ROOT(&root->inode_tree);
+ spin_unlock(&root->inode_lock);
+ if (empty)
+ btrfs_add_dead_root(root);
+ }
+}
+
+int btrfs_invalidate_inodes(struct btrfs_root *root)
+{
+ struct rb_node *node;
+ struct rb_node *prev;
+ struct btrfs_inode *entry;
+ struct inode *inode;
+ u64 objectid = 0;
+
+ WARN_ON(btrfs_root_refs(&root->root_item) != 0);
+
+ spin_lock(&root->inode_lock);
+again:
+ node = root->inode_tree.rb_node;
+ prev = NULL;
+ while (node) {
+ prev = node;
+ entry = rb_entry(node, struct btrfs_inode, rb_node);
+
+ if (objectid < entry->vfs_inode.i_ino)
+ node = node->rb_left;
+ else if (objectid > entry->vfs_inode.i_ino)
+ node = node->rb_right;
+ else
+ break;
+ }
+ if (!node) {
+ while (prev) {
+ entry = rb_entry(prev, struct btrfs_inode, rb_node);
+ if (objectid <= entry->vfs_inode.i_ino) {
+ node = prev;
+ break;
+ }
+ prev = rb_next(prev);
+ }
+ }
+ while (node) {
+ entry = rb_entry(node, struct btrfs_inode, rb_node);
+ objectid = entry->vfs_inode.i_ino + 1;
+ inode = igrab(&entry->vfs_inode);
+ if (inode) {
+ spin_unlock(&root->inode_lock);
+ if (atomic_read(&inode->i_count) > 1)
+ d_prune_aliases(inode);
+ /*
+ * btrfs_drop_inode will remove it from
+ * the inode cache when its usage count
+ * hits zero.
+ */
+ iput(inode);
+ cond_resched();
+ spin_lock(&root->inode_lock);
+ goto again;
+ }
+
+ if (cond_resched_lock(&root->inode_lock))
+ goto again;
+
+ node = rb_next(node);
+ }
+ spin_unlock(&root->inode_lock);
+ return 0;
}
static noinline void init_btrfs_i(struct inode *inode)
bi->generation = 0;
bi->sequence = 0;
bi->last_trans = 0;
+ bi->last_sub_trans = 0;
bi->logged_trans = 0;
bi->delalloc_bytes = 0;
bi->reserved_bytes = 0;
return inode;
}
+static struct inode *new_simple_dir(struct super_block *s,
+ struct btrfs_key *key,
+ struct btrfs_root *root)
+{
+ struct inode *inode = new_inode(s);
+
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
+
+ init_btrfs_i(inode);
+
+ BTRFS_I(inode)->root = root;
+ memcpy(&BTRFS_I(inode)->location, key, sizeof(*key));
+ BTRFS_I(inode)->dummy_inode = 1;
+
+ inode->i_ino = BTRFS_EMPTY_SUBVOL_DIR_OBJECTID;
+ inode->i_op = &simple_dir_inode_operations;
+ inode->i_fop = &simple_dir_operations;
+ inode->i_mode = S_IFDIR | S_IRUGO | S_IWUSR | S_IXUGO;
+ inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
+
+ return inode;
+}
+
struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry)
{
struct inode *inode;
- struct btrfs_inode *bi = BTRFS_I(dir);
- struct btrfs_root *root = bi->root;
+ struct btrfs_root *root = BTRFS_I(dir)->root;
struct btrfs_root *sub_root = root;
struct btrfs_key location;
+ int index;
int ret;
+ dentry->d_op = &btrfs_dentry_operations;
+
if (dentry->d_name.len > BTRFS_NAME_LEN)
return ERR_PTR(-ENAMETOOLONG);
if (ret < 0)
return ERR_PTR(ret);
- inode = NULL;
- if (location.objectid) {
- ret = fixup_tree_root_location(root, &location, &sub_root,
- dentry);
- if (ret < 0)
- return ERR_PTR(ret);
- if (ret > 0)
- return ERR_PTR(-ENOENT);
+ if (location.objectid == 0)
+ return NULL;
+
+ if (location.type == BTRFS_INODE_ITEM_KEY) {
+ inode = btrfs_iget(dir->i_sb, &location, root);
+ return inode;
+ }
+
+ BUG_ON(location.type != BTRFS_ROOT_ITEM_KEY);
+
+ index = srcu_read_lock(&root->fs_info->subvol_srcu);
+ ret = fixup_tree_root_location(root, dir, dentry,
+ &location, &sub_root);
+ if (ret < 0) {
+ if (ret != -ENOENT)
+ inode = ERR_PTR(ret);
+ else
+ inode = new_simple_dir(dir->i_sb, &location, sub_root);
+ } else {
inode = btrfs_iget(dir->i_sb, &location, sub_root);
- if (IS_ERR(inode))
- return ERR_CAST(inode);
}
+ srcu_read_unlock(&root->fs_info->subvol_srcu, index);
+
return inode;
}
+static int btrfs_dentry_delete(struct dentry *dentry)
+{
+ struct btrfs_root *root;
+
+ if (!dentry->d_inode && !IS_ROOT(dentry))
+ dentry = dentry->d_parent;
+
+ if (dentry->d_inode) {
+ root = BTRFS_I(dentry->d_inode)->root;
+ if (btrfs_root_refs(&root->root_item) == 0)
+ return 1;
+ }
+ return 0;
+}
+
static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry,
struct nameidata *nd)
{
struct inode *inode;
- if (dentry->d_name.len > BTRFS_NAME_LEN)
- return ERR_PTR(-ENAMETOOLONG);
-
inode = btrfs_lookup_dentry(dir, dentry);
if (IS_ERR(inode))
return ERR_CAST(inode);
if (ret != 0)
goto fail;
- if (objectid > root->highest_inode)
- root->highest_inode = objectid;
-
inode->i_uid = current_fsuid();
if (dir && (dir->i_mode & S_ISGID)) {
struct inode *parent_inode, struct inode *inode,
const char *name, int name_len, int add_backref, u64 index)
{
- int ret;
+ int ret = 0;
struct btrfs_key key;
struct btrfs_root *root = BTRFS_I(parent_inode)->root;
- key.objectid = inode->i_ino;
- btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
- key.offset = 0;
+ if (unlikely(inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ memcpy(&key, &BTRFS_I(inode)->root->root_key, sizeof(key));
+ } else {
+ key.objectid = inode->i_ino;
+ btrfs_set_key_type(&key, BTRFS_INODE_ITEM_KEY);
+ key.offset = 0;
+ }
+
+ if (unlikely(inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ ret = btrfs_add_root_ref(trans, root->fs_info->tree_root,
+ key.objectid, root->root_key.objectid,
+ parent_inode->i_ino,
+ index, name, name_len);
+ } else if (add_backref) {
+ ret = btrfs_insert_inode_ref(trans, root,
+ name, name_len, inode->i_ino,
+ parent_inode->i_ino, index);
+ }
- ret = btrfs_insert_dir_item(trans, root, name, name_len,
- parent_inode->i_ino,
- &key, btrfs_inode_type(inode),
- index);
if (ret == 0) {
- if (add_backref) {
- ret = btrfs_insert_inode_ref(trans, root,
- name, name_len,
- inode->i_ino,
- parent_inode->i_ino,
- index);
- }
+ ret = btrfs_insert_dir_item(trans, root, name, name_len,
+ parent_inode->i_ino, &key,
+ btrfs_inode_type(inode), index);
+ BUG_ON(ret);
+
btrfs_i_size_write(parent_inode, parent_inode->i_size +
name_len * 2);
parent_inode->i_mtime = parent_inode->i_ctime = CURRENT_TIME;
if (!new_valid_dev(rdev))
return -EINVAL;
- err = btrfs_check_metadata_free_space(root);
+ /*
+ * 2 for inode item and ref
+ * 2 for dir items
+ * 1 for xattr if selinux is on
+ */
+ err = btrfs_reserve_metadata_space(root, 5);
if (err)
- goto fail;
+ return err;
trans = btrfs_start_transaction(root, 1);
+ if (!trans)
+ goto fail;
btrfs_set_trans_block_group(trans, dir);
err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
fail:
+ btrfs_unreserve_metadata_space(root, 5);
if (drop_inode) {
inode_dec_link_count(inode);
iput(inode);
u64 objectid;
u64 index = 0;
- err = btrfs_check_metadata_free_space(root);
+ /*
+ * 2 for inode item and ref
+ * 2 for dir items
+ * 1 for xattr if selinux is on
+ */
+ err = btrfs_reserve_metadata_space(root, 5);
if (err)
- goto fail;
+ return err;
+
trans = btrfs_start_transaction(root, 1);
+ if (!trans)
+ goto fail;
btrfs_set_trans_block_group(trans, dir);
err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
fail:
+ btrfs_unreserve_metadata_space(root, 5);
if (drop_inode) {
inode_dec_link_count(inode);
iput(inode);
if (inode->i_nlink == 0)
return -ENOENT;
- btrfs_inc_nlink(inode);
- err = btrfs_check_metadata_free_space(root);
+ /*
+ * 1 item for inode ref
+ * 2 items for dir items
+ */
+ err = btrfs_reserve_metadata_space(root, 3);
if (err)
- goto fail;
+ return err;
+
+ btrfs_inc_nlink(inode);
+
err = btrfs_set_inode_index(dir, &index);
if (err)
goto fail;
err = btrfs_add_nondir(trans, dentry, inode, 1, index);
- if (err)
- drop_inode = 1;
-
- btrfs_update_inode_block_group(trans, dir);
- err = btrfs_update_inode(trans, root, inode);
-
- if (err)
+ if (err) {
drop_inode = 1;
+ } else {
+ btrfs_update_inode_block_group(trans, dir);
+ err = btrfs_update_inode(trans, root, inode);
+ BUG_ON(err);
+ btrfs_log_new_name(trans, inode, NULL, dentry->d_parent);
+ }
nr = trans->blocks_used;
-
- btrfs_log_new_name(trans, inode, NULL, dentry->d_parent);
btrfs_end_transaction_throttle(trans, root);
fail:
+ btrfs_unreserve_metadata_space(root, 3);
if (drop_inode) {
inode_dec_link_count(inode);
iput(inode);
u64 index = 0;
unsigned long nr = 1;
- err = btrfs_check_metadata_free_space(root);
+ /*
+ * 2 items for inode and ref
+ * 2 items for dir items
+ * 1 for xattr if selinux is on
+ */
+ err = btrfs_reserve_metadata_space(root, 5);
if (err)
- goto out_unlock;
+ return err;
trans = btrfs_start_transaction(root, 1);
- btrfs_set_trans_block_group(trans, dir);
-
- if (IS_ERR(trans)) {
- err = PTR_ERR(trans);
+ if (!trans) {
+ err = -ENOMEM;
goto out_unlock;
}
+ btrfs_set_trans_block_group(trans, dir);
err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
if (err) {
btrfs_end_transaction_throttle(trans, root);
out_unlock:
+ btrfs_unreserve_metadata_space(root, 5);
if (drop_on_err)
iput(inode);
btrfs_btree_balance_dirty(root, nr);
int compressed;
again:
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, start, len);
if (em)
em->bdev = root->fs_info->fs_devices->latest_bdev;
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (em) {
if (em->start > start || em->start + em->len <= start)
map = kmap(page);
read_extent_buffer(leaf, map + pg_offset, ptr,
copy_size);
+ if (pg_offset + copy_size < PAGE_CACHE_SIZE) {
+ memset(map + pg_offset + copy_size, 0,
+ PAGE_CACHE_SIZE - pg_offset -
+ copy_size);
+ }
kunmap(page);
}
flush_dcache_page(page);
}
err = 0;
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
/* it is possible that someone inserted the extent into the tree
* while we had the lock dropped. It is also possible that
err = 0;
}
}
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
out:
if (path)
btrfs_free_path(path);
u64 page_start = page_offset(page);
u64 page_end = page_start + PAGE_CACHE_SIZE - 1;
+
+ /*
+ * we have the page locked, so new writeback can't start,
+ * and the dirty bit won't be cleared while we are here.
+ *
+ * Wait for IO on this page so that we can safely clear
+ * the PagePrivate2 bit and do ordered accounting
+ */
wait_on_page_writeback(page);
+
tree = &BTRFS_I(page->mapping->host)->io_tree;
if (offset) {
btrfs_releasepage(page, GFP_NOFS);
return;
}
-
lock_extent(tree, page_start, page_end, GFP_NOFS);
ordered = btrfs_lookup_ordered_extent(page->mapping->host,
page_offset(page));
*/
clear_extent_bit(tree, page_start, page_end,
EXTENT_DIRTY | EXTENT_DELALLOC |
- EXTENT_LOCKED, 1, 0, GFP_NOFS);
- btrfs_finish_ordered_io(page->mapping->host,
- page_start, page_end);
+ EXTENT_LOCKED | EXTENT_DO_ACCOUNTING, 1, 0,
+ NULL, GFP_NOFS);
+ /*
+ * whoever cleared the private bit is responsible
+ * for the finish_ordered_io
+ */
+ if (TestClearPagePrivate2(page)) {
+ btrfs_finish_ordered_io(page->mapping->host,
+ page_start, page_end);
+ }
btrfs_put_ordered_extent(ordered);
lock_extent(tree, page_start, page_end, GFP_NOFS);
}
clear_extent_bit(tree, page_start, page_end,
EXTENT_LOCKED | EXTENT_DIRTY | EXTENT_DELALLOC |
- EXTENT_ORDERED,
- 1, 1, GFP_NOFS);
+ EXTENT_DO_ACCOUNTING, 1, 1, NULL, GFP_NOFS);
__btrfs_releasepage(page, GFP_NOFS);
ClearPageChecked(page);
goto out;
}
+ ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+ if (ret) {
+ btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+ ret = VM_FAULT_SIGBUS;
+ goto out;
+ }
+
ret = VM_FAULT_NOPAGE; /* make the VM retry the fault */
again:
lock_page(page);
goto again;
}
- btrfs_set_extent_delalloc(inode, page_start, page_end);
+ /*
+ * XXX - page_mkwrite gets called every time the page is dirtied, even
+ * if it was already dirty, so for space accounting reasons we need to
+ * clear any delalloc bits for the range we are fixing to save. There
+ * is probably a better way to do this, but for now keep consistent with
+ * prepare_pages in the normal write path.
+ */
+ clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end,
+ EXTENT_DIRTY | EXTENT_DELALLOC | EXTENT_DO_ACCOUNTING,
+ GFP_NOFS);
+
+ ret = btrfs_set_extent_delalloc(inode, page_start, page_end);
+ if (ret) {
+ unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+ ret = VM_FAULT_SIGBUS;
+ btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+ goto out_unlock;
+ }
ret = 0;
/* page is wholly or partially inside EOF */
}
ClearPageChecked(page);
set_page_dirty(page);
+ SetPageUptodate(page);
+
+ BTRFS_I(inode)->last_trans = root->fs_info->generation;
+ BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid;
- BTRFS_I(inode)->last_trans = root->fs_info->generation + 1;
unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
out_unlock:
+ btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
+ if (!ret)
+ return VM_FAULT_LOCKED;
unlock_page(page);
out:
return ret;
if (IS_APPEND(inode) || IS_IMMUTABLE(inode))
return;
- btrfs_truncate_page(inode->i_mapping, inode->i_size);
+ ret = btrfs_truncate_page(inode->i_mapping, inode->i_size);
+ if (ret)
+ return;
btrfs_wait_ordered_range(inode, inode->i_size & (~mask), (u64)-1);
trans = btrfs_start_transaction(root, 1);
* create a new subvolume directory/inode (helper for the ioctl).
*/
int btrfs_create_subvol_root(struct btrfs_trans_handle *trans,
- struct btrfs_root *new_root, struct dentry *dentry,
+ struct btrfs_root *new_root,
u64 new_dirid, u64 alloc_hint)
{
struct inode *inode;
- int error;
+ int err;
u64 index = 0;
inode = btrfs_new_inode(trans, new_root, NULL, "..", 2, new_dirid,
inode->i_nlink = 1;
btrfs_i_size_write(inode, 0);
- error = btrfs_update_inode(trans, new_root, inode);
- if (error)
- return error;
+ err = btrfs_update_inode(trans, new_root, inode);
+ BUG_ON(err);
- d_instantiate(dentry, inode);
+ iput(inode);
return 0;
}
if (!ei)
return NULL;
ei->last_trans = 0;
+ ei->last_sub_trans = 0;
ei->logged_trans = 0;
+ ei->outstanding_extents = 0;
+ ei->reserved_extents = 0;
+ spin_lock_init(&ei->accounting_lock);
btrfs_ordered_inode_tree_init(&ei->ordered_tree);
INIT_LIST_HEAD(&ei->i_orphan);
INIT_LIST_HEAD(&ei->ordered_operations);
kmem_cache_free(btrfs_inode_cachep, BTRFS_I(inode));
}
+void btrfs_drop_inode(struct inode *inode)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+
+ if (inode->i_nlink > 0 && btrfs_root_refs(&root->root_item) == 0)
+ generic_delete_inode(inode);
+ else
+ generic_drop_inode(inode);
+}
+
static void init_once(void *foo)
{
struct btrfs_inode *ei = (struct btrfs_inode *) foo;
{
struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(old_dir)->root;
+ struct btrfs_root *dest = BTRFS_I(new_dir)->root;
struct inode *new_inode = new_dentry->d_inode;
struct inode *old_inode = old_dentry->d_inode;
struct timespec ctime = CURRENT_TIME;
u64 index = 0;
+ u64 root_objectid;
int ret;
- /* we're not allowed to rename between subvolumes */
- if (BTRFS_I(old_inode)->root->root_key.objectid !=
- BTRFS_I(new_dir)->root->root_key.objectid)
+ if (new_dir->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)
+ return -EPERM;
+
+ /* we only allow rename subvolume link between subvolumes */
+ if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID && root != dest)
return -EXDEV;
+ if (old_inode->i_ino == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID ||
+ (new_inode && new_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID))
+ return -ENOTEMPTY;
+
if (S_ISDIR(old_inode->i_mode) && new_inode &&
- new_inode->i_size > BTRFS_EMPTY_DIR_SIZE) {
+ new_inode->i_size > BTRFS_EMPTY_DIR_SIZE)
return -ENOTEMPTY;
- }
- /* to rename a snapshot or subvolume, we need to juggle the
- * backrefs. This isn't coded yet
+ /*
+ * 2 items for dir items
+ * 1 item for orphan entry
+ * 1 item for ref
*/
- if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
- return -EXDEV;
-
- ret = btrfs_check_metadata_free_space(root);
+ ret = btrfs_reserve_metadata_space(root, 4);
if (ret)
- goto out_unlock;
+ return ret;
/*
* we're using rename to replace one file with another.
old_inode->i_size > BTRFS_ORDERED_OPERATIONS_FLUSH_LIMIT)
filemap_flush(old_inode->i_mapping);
+ /* close the racy window with snapshot create/destroy ioctl */
+ if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
+ down_read(&root->fs_info->subvol_sem);
+
trans = btrfs_start_transaction(root, 1);
+ btrfs_set_trans_block_group(trans, new_dir);
+
+ if (dest != root)
+ btrfs_record_root_in_trans(trans, dest);
+ ret = btrfs_set_inode_index(new_dir, &index);
+ if (ret)
+ goto out_fail;
+
+ if (unlikely(old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ /* force full log commit if subvolume involved. */
+ root->fs_info->last_trans_log_full_commit = trans->transid;
+ } else {
+ ret = btrfs_insert_inode_ref(trans, dest,
+ new_dentry->d_name.name,
+ new_dentry->d_name.len,
+ old_inode->i_ino,
+ new_dir->i_ino, index);
+ if (ret)
+ goto out_fail;
+ /*
+ * this is an ugly little race, but the rename is required
+ * to make sure that if we crash, the inode is either at the
+ * old name or the new one. pinning the log transaction lets
+ * us make sure we don't allow a log commit to come in after
+ * we unlink the name but before we add the new name back in.
+ */
+ btrfs_pin_log_trans(root);
+ }
/*
* make sure the inode gets flushed if it is replacing
* something.
btrfs_add_ordered_operation(trans, root, old_inode);
}
- /*
- * this is an ugly little race, but the rename is required to make
- * sure that if we crash, the inode is either at the old name
- * or the new one. pinning the log transaction lets us make sure
- * we don't allow a log commit to come in after we unlink the
- * name but before we add the new name back in.
- */
- btrfs_pin_log_trans(root);
-
- btrfs_set_trans_block_group(trans, new_dir);
-
- btrfs_inc_nlink(old_dentry->d_inode);
old_dir->i_ctime = old_dir->i_mtime = ctime;
new_dir->i_ctime = new_dir->i_mtime = ctime;
old_inode->i_ctime = ctime;
if (old_dentry->d_parent != new_dentry->d_parent)
btrfs_record_unlink_dir(trans, old_dir, old_inode, 1);
- ret = btrfs_unlink_inode(trans, root, old_dir, old_dentry->d_inode,
- old_dentry->d_name.name,
- old_dentry->d_name.len);
- if (ret)
- goto out_fail;
+ if (unlikely(old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)) {
+ root_objectid = BTRFS_I(old_inode)->root->root_key.objectid;
+ ret = btrfs_unlink_subvol(trans, root, old_dir, root_objectid,
+ old_dentry->d_name.name,
+ old_dentry->d_name.len);
+ } else {
+ btrfs_inc_nlink(old_dentry->d_inode);
+ ret = btrfs_unlink_inode(trans, root, old_dir,
+ old_dentry->d_inode,
+ old_dentry->d_name.name,
+ old_dentry->d_name.len);
+ }
+ BUG_ON(ret);
if (new_inode) {
new_inode->i_ctime = CURRENT_TIME;
- ret = btrfs_unlink_inode(trans, root, new_dir,
- new_dentry->d_inode,
- new_dentry->d_name.name,
- new_dentry->d_name.len);
- if (ret)
- goto out_fail;
+ if (unlikely(new_inode->i_ino ==
+ BTRFS_EMPTY_SUBVOL_DIR_OBJECTID)) {
+ root_objectid = BTRFS_I(new_inode)->location.objectid;
+ ret = btrfs_unlink_subvol(trans, dest, new_dir,
+ root_objectid,
+ new_dentry->d_name.name,
+ new_dentry->d_name.len);
+ BUG_ON(new_inode->i_nlink == 0);
+ } else {
+ ret = btrfs_unlink_inode(trans, dest, new_dir,
+ new_dentry->d_inode,
+ new_dentry->d_name.name,
+ new_dentry->d_name.len);
+ }
+ BUG_ON(ret);
if (new_inode->i_nlink == 0) {
ret = btrfs_orphan_add(trans, new_dentry->d_inode);
- if (ret)
- goto out_fail;
+ BUG_ON(ret);
}
-
}
- ret = btrfs_set_inode_index(new_dir, &index);
- if (ret)
- goto out_fail;
- ret = btrfs_add_link(trans, new_dentry->d_parent->d_inode,
- old_inode, new_dentry->d_name.name,
- new_dentry->d_name.len, 1, index);
- if (ret)
- goto out_fail;
+ ret = btrfs_add_link(trans, new_dir, old_inode,
+ new_dentry->d_name.name,
+ new_dentry->d_name.len, 0, index);
+ BUG_ON(ret);
- btrfs_log_new_name(trans, old_inode, old_dir,
- new_dentry->d_parent);
+ if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
+ btrfs_log_new_name(trans, old_inode, old_dir,
+ new_dentry->d_parent);
+ btrfs_end_log_trans(root);
+ }
out_fail:
-
- /* this btrfs_end_log_trans just allows the current
- * log-sub transaction to complete
- */
- btrfs_end_log_trans(root);
btrfs_end_transaction_throttle(trans, root);
-out_unlock:
+
+ if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
+ up_read(&root->fs_info->subvol_sem);
+
+ btrfs_unreserve_metadata_space(root, 4);
return ret;
}
if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root))
return -ENAMETOOLONG;
- err = btrfs_check_metadata_free_space(root);
+ /*
+ * 2 items for inode item and ref
+ * 2 items for dir items
+ * 1 item for xattr if selinux is on
+ */
+ err = btrfs_reserve_metadata_space(root, 5);
if (err)
- goto out_fail;
+ return err;
trans = btrfs_start_transaction(root, 1);
+ if (!trans)
+ goto out_fail;
btrfs_set_trans_block_group(trans, dir);
err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
nr = trans->blocks_used;
btrfs_end_transaction_throttle(trans, root);
out_fail:
+ btrfs_unreserve_metadata_space(root, 5);
if (drop_inode) {
inode_dec_link_count(inode);
iput(inode);
while (num_bytes > 0) {
alloc_size = min(num_bytes, root->fs_info->max_extent);
+
+ ret = btrfs_reserve_metadata_space(root, 1);
+ if (ret)
+ goto out;
+
ret = btrfs_reserve_extent(trans, root, alloc_size,
root->sectorsize, 0, alloc_hint,
(u64)-1, &ins, 1);
0, 0, 0,
BTRFS_FILE_EXTENT_PREALLOC);
BUG_ON(ret);
+ btrfs_drop_extent_cache(inode, cur_offset,
+ cur_offset + ins.offset -1, 0);
num_bytes -= ins.offset;
cur_offset += ins.offset;
alloc_hint = ins.objectid + ins.offset;
+ btrfs_unreserve_metadata_space(root, 1);
}
out:
if (cur_offset > start) {
.lookup = btrfs_lookup,
.permission = btrfs_permission,
};
-static struct file_operations btrfs_dir_file_operations = {
+
+static const struct file_operations btrfs_dir_file_operations = {
.llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = btrfs_real_readdir,
.readpage_io_failed_hook = btrfs_io_failed_hook,
.set_bit_hook = btrfs_set_bit_hook,
.clear_bit_hook = btrfs_clear_bit_hook,
+ .merge_extent_hook = btrfs_merge_extent_hook,
+ .split_extent_hook = btrfs_split_extent_hook,
};
/*
.invalidatepage = btrfs_invalidatepage,
.releasepage = btrfs_releasepage,
.set_page_dirty = btrfs_set_page_dirty,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations btrfs_symlink_aops = {
.listxattr = btrfs_listxattr,
.removexattr = btrfs_removexattr,
};
+
+const struct dentry_operations btrfs_dentry_operations = {
+ .d_delete = btrfs_dentry_delete,
+};
struct btrfs_root_item root_item;
struct btrfs_inode_item *inode_item;
struct extent_buffer *leaf;
- struct btrfs_root *new_root = root;
- struct inode *dir;
+ struct btrfs_root *new_root;
+ struct inode *dir = dentry->d_parent->d_inode;
int ret;
int err;
u64 objectid;
u64 index = 0;
unsigned long nr = 1;
- ret = btrfs_check_metadata_free_space(root);
+ /*
+ * 1 - inode item
+ * 2 - refs
+ * 1 - root item
+ * 2 - dir items
+ */
+ ret = btrfs_reserve_metadata_space(root, 6);
if (ret)
- goto fail_commit;
+ return ret;
trans = btrfs_start_transaction(root, 1);
BUG_ON(!trans);
if (ret)
goto fail;
+ key.offset = (u64)-1;
+ new_root = btrfs_read_fs_root_no_name(root->fs_info, &key);
+ BUG_ON(IS_ERR(new_root));
+
+ btrfs_record_root_in_trans(trans, new_root);
+
+ ret = btrfs_create_subvol_root(trans, new_root, new_dirid,
+ BTRFS_I(dir)->block_group);
/*
* insert the directory item
*/
- key.offset = (u64)-1;
- dir = dentry->d_parent->d_inode;
ret = btrfs_set_inode_index(dir, &index);
BUG_ON(ret);
ret = btrfs_update_inode(trans, root, dir);
BUG_ON(ret);
- /* add the backref first */
ret = btrfs_add_root_ref(trans, root->fs_info->tree_root,
- objectid, BTRFS_ROOT_BACKREF_KEY,
- root->root_key.objectid,
+ objectid, root->root_key.objectid,
dir->i_ino, index, name, namelen);
BUG_ON(ret);
- /* now add the forward ref */
- ret = btrfs_add_root_ref(trans, root->fs_info->tree_root,
- root->root_key.objectid, BTRFS_ROOT_REF_KEY,
- objectid,
- dir->i_ino, index, name, namelen);
-
- BUG_ON(ret);
-
- ret = btrfs_commit_transaction(trans, root);
- if (ret)
- goto fail_commit;
-
- new_root = btrfs_read_fs_root_no_name(root->fs_info, &key);
- BUG_ON(!new_root);
-
- trans = btrfs_start_transaction(new_root, 1);
- BUG_ON(!trans);
-
- ret = btrfs_create_subvol_root(trans, new_root, dentry, new_dirid,
- BTRFS_I(dir)->block_group);
- if (ret)
- goto fail;
-
+ d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry));
fail:
nr = trans->blocks_used;
- err = btrfs_commit_transaction(trans, new_root);
+ err = btrfs_commit_transaction(trans, root);
if (err && !ret)
ret = err;
-fail_commit:
+
+ btrfs_unreserve_metadata_space(root, 6);
btrfs_btree_balance_dirty(root, nr);
return ret;
}
if (!root->ref_cows)
return -EINVAL;
- ret = btrfs_check_metadata_free_space(root);
+ /*
+ * 1 - inode item
+ * 2 - refs
+ * 1 - root item
+ * 2 - dir items
+ */
+ ret = btrfs_reserve_metadata_space(root, 6);
if (ret)
goto fail_unlock;
pending_snapshot = kzalloc(sizeof(*pending_snapshot), GFP_NOFS);
if (!pending_snapshot) {
ret = -ENOMEM;
+ btrfs_unreserve_metadata_space(root, 6);
goto fail_unlock;
}
pending_snapshot->name = kmalloc(namelen + 1, GFP_NOFS);
if (!pending_snapshot->name) {
ret = -ENOMEM;
kfree(pending_snapshot);
+ btrfs_unreserve_metadata_space(root, 6);
goto fail_unlock;
}
memcpy(pending_snapshot->name, name, namelen);
* sys_mkdirat and vfs_mkdir, but we only do a single component lookup
* inside this filesystem so it's quite a bit simpler.
*/
-static noinline int btrfs_mksubvol(struct path *parent, char *name,
- int mode, int namelen,
+static noinline int btrfs_mksubvol(struct path *parent,
+ char *name, int namelen,
struct btrfs_root *snap_src)
{
+ struct inode *dir = parent->dentry->d_inode;
struct dentry *dentry;
int error;
- mutex_lock_nested(&parent->dentry->d_inode->i_mutex, I_MUTEX_PARENT);
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
dentry = lookup_one_len(name, parent->dentry, namelen);
error = PTR_ERR(dentry);
if (dentry->d_inode)
goto out_dput;
- if (!IS_POSIXACL(parent->dentry->d_inode))
- mode &= ~current_umask();
-
error = mnt_want_write(parent->mnt);
if (error)
goto out_dput;
- error = btrfs_may_create(parent->dentry->d_inode, dentry);
+ error = btrfs_may_create(dir, dentry);
if (error)
goto out_drop_write;
- /*
- * Actually perform the low-level subvolume creation after all
- * this VFS fuzz.
- *
- * Eventually we want to pass in an inode under which we create this
- * subvolume, but for now all are under the filesystem root.
- *
- * Also we should pass on the mode eventually to allow creating new
- * subvolume with specific mode bits.
- */
+ down_read(&BTRFS_I(dir)->root->fs_info->subvol_sem);
+
+ if (btrfs_root_refs(&BTRFS_I(dir)->root->root_item) == 0)
+ goto out_up_read;
+
if (snap_src) {
- struct dentry *dir = dentry->d_parent;
- struct dentry *test = dir->d_parent;
- struct btrfs_path *path = btrfs_alloc_path();
- int ret;
- u64 test_oid;
- u64 parent_oid = BTRFS_I(dir->d_inode)->root->root_key.objectid;
-
- test_oid = snap_src->root_key.objectid;
-
- ret = btrfs_find_root_ref(snap_src->fs_info->tree_root,
- path, parent_oid, test_oid);
- if (ret == 0)
- goto create;
- btrfs_release_path(snap_src->fs_info->tree_root, path);
-
- /* we need to make sure we aren't creating a directory loop
- * by taking a snapshot of something that has our current
- * subvol in its directory tree. So, this loops through
- * the dentries and checks the forward refs for each subvolume
- * to see if is references the subvolume where we are
- * placing this new snapshot.
- */
- while (1) {
- if (!test ||
- dir == snap_src->fs_info->sb->s_root ||
- test == snap_src->fs_info->sb->s_root ||
- test->d_inode->i_sb != snap_src->fs_info->sb) {
- break;
- }
- if (S_ISLNK(test->d_inode->i_mode)) {
- printk(KERN_INFO "Btrfs symlink in snapshot "
- "path, failed\n");
- error = -EMLINK;
- btrfs_free_path(path);
- goto out_drop_write;
- }
- test_oid =
- BTRFS_I(test->d_inode)->root->root_key.objectid;
- ret = btrfs_find_root_ref(snap_src->fs_info->tree_root,
- path, test_oid, parent_oid);
- if (ret == 0) {
- printk(KERN_INFO "Btrfs snapshot creation "
- "failed, looping\n");
- error = -EMLINK;
- btrfs_free_path(path);
- goto out_drop_write;
- }
- btrfs_release_path(snap_src->fs_info->tree_root, path);
- test = test->d_parent;
- }
-create:
- btrfs_free_path(path);
- error = create_snapshot(snap_src, dentry, name, namelen);
+ error = create_snapshot(snap_src, dentry,
+ name, namelen);
} else {
- error = create_subvol(BTRFS_I(parent->dentry->d_inode)->root,
- dentry, name, namelen);
+ error = create_subvol(BTRFS_I(dir)->root, dentry,
+ name, namelen);
}
- if (error)
- goto out_drop_write;
-
- fsnotify_mkdir(parent->dentry->d_inode, dentry);
+ if (!error)
+ fsnotify_mkdir(dir, dentry);
+out_up_read:
+ up_read(&BTRFS_I(dir)->root->fs_info->subvol_sem);
out_drop_write:
mnt_drop_write(parent->mnt);
out_dput:
dput(dentry);
out_unlock:
- mutex_unlock(&parent->dentry->d_inode->i_mutex);
+ mutex_unlock(&dir->i_mutex);
return error;
}
-
static int btrfs_defrag_file(struct file *file)
{
struct inode *inode = fdentry(file)->d_inode;
clear_page_dirty_for_io(page);
btrfs_set_extent_delalloc(inode, page_start, page_end);
-
- unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
set_page_dirty(page);
+ unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
unlock_page(page);
page_cache_release(page);
balance_dirty_pages_ratelimited_nr(inode->i_mapping, 1);
return 0;
}
-static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
+static noinline int btrfs_ioctl_resize(struct btrfs_root *root,
+ void __user *arg)
{
u64 new_size;
u64 old_size;
{
struct btrfs_root *root = BTRFS_I(fdentry(file)->d_inode)->root;
struct btrfs_ioctl_vol_args *vol_args;
- struct btrfs_dir_item *di;
- struct btrfs_path *path;
struct file *src_file;
- u64 root_dirid;
int namelen;
int ret = 0;
goto out;
}
- path = btrfs_alloc_path();
- if (!path) {
- ret = -ENOMEM;
- goto out;
- }
-
- root_dirid = root->fs_info->sb->s_root->d_inode->i_ino,
- di = btrfs_lookup_dir_item(NULL, root->fs_info->tree_root,
- path, root_dirid,
- vol_args->name, namelen, 0);
- btrfs_free_path(path);
-
- if (di && !IS_ERR(di)) {
- ret = -EEXIST;
- goto out;
- }
-
- if (IS_ERR(di)) {
- ret = PTR_ERR(di);
- goto out;
- }
-
if (subvol) {
- ret = btrfs_mksubvol(&file->f_path, vol_args->name,
- file->f_path.dentry->d_inode->i_mode,
- namelen, NULL);
+ ret = btrfs_mksubvol(&file->f_path, vol_args->name, namelen,
+ NULL);
} else {
struct inode *src_inode;
src_file = fget(vol_args->fd);
fput(src_file);
goto out;
}
- ret = btrfs_mksubvol(&file->f_path, vol_args->name,
- file->f_path.dentry->d_inode->i_mode,
- namelen, BTRFS_I(src_inode)->root);
+ ret = btrfs_mksubvol(&file->f_path, vol_args->name, namelen,
+ BTRFS_I(src_inode)->root);
fput(src_file);
}
-
out:
kfree(vol_args);
return ret;
}
+/*
+ * helper to check if the subvolume references other subvolumes
+ */
+static noinline int may_destroy_subvol(struct btrfs_root *root)
+{
+ struct btrfs_path *path;
+ struct btrfs_key key;
+ int ret;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ key.objectid = root->root_key.objectid;
+ key.type = BTRFS_ROOT_REF_KEY;
+ key.offset = (u64)-1;
+
+ ret = btrfs_search_slot(NULL, root->fs_info->tree_root,
+ &key, path, 0, 0);
+ if (ret < 0)
+ goto out;
+ BUG_ON(ret == 0);
+
+ ret = 0;
+ if (path->slots[0] > 0) {
+ path->slots[0]--;
+ btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+ if (key.objectid == root->root_key.objectid &&
+ key.type == BTRFS_ROOT_REF_KEY)
+ ret = -ENOTEMPTY;
+ }
+out:
+ btrfs_free_path(path);
+ return ret;
+}
+
+static noinline int btrfs_ioctl_snap_destroy(struct file *file,
+ void __user *arg)
+{
+ struct dentry *parent = fdentry(file);
+ struct dentry *dentry;
+ struct inode *dir = parent->d_inode;
+ struct inode *inode;
+ struct btrfs_root *root = BTRFS_I(dir)->root;
+ struct btrfs_root *dest = NULL;
+ struct btrfs_ioctl_vol_args *vol_args;
+ struct btrfs_trans_handle *trans;
+ int namelen;
+ int ret;
+ int err = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
+
+ vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
+ namelen = strlen(vol_args->name);
+ if (strchr(vol_args->name, '/') ||
+ strncmp(vol_args->name, "..", namelen) == 0) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ err = mnt_want_write(file->f_path.mnt);
+ if (err)
+ goto out;
+
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
+ dentry = lookup_one_len(vol_args->name, parent, namelen);
+ if (IS_ERR(dentry)) {
+ err = PTR_ERR(dentry);
+ goto out_unlock_dir;
+ }
+
+ if (!dentry->d_inode) {
+ err = -ENOENT;
+ goto out_dput;
+ }
+
+ inode = dentry->d_inode;
+ if (inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
+ err = -EINVAL;
+ goto out_dput;
+ }
+
+ dest = BTRFS_I(inode)->root;
+
+ mutex_lock(&inode->i_mutex);
+ err = d_invalidate(dentry);
+ if (err)
+ goto out_unlock;
+
+ down_write(&root->fs_info->subvol_sem);
+
+ err = may_destroy_subvol(dest);
+ if (err)
+ goto out_up_write;
+
+ trans = btrfs_start_transaction(root, 1);
+ ret = btrfs_unlink_subvol(trans, root, dir,
+ dest->root_key.objectid,
+ dentry->d_name.name,
+ dentry->d_name.len);
+ BUG_ON(ret);
+
+ btrfs_record_root_in_trans(trans, dest);
+
+ memset(&dest->root_item.drop_progress, 0,
+ sizeof(dest->root_item.drop_progress));
+ dest->root_item.drop_level = 0;
+ btrfs_set_root_refs(&dest->root_item, 0);
+
+ ret = btrfs_insert_orphan_item(trans,
+ root->fs_info->tree_root,
+ dest->root_key.objectid);
+ BUG_ON(ret);
+
+ ret = btrfs_commit_transaction(trans, root);
+ BUG_ON(ret);
+ inode->i_flags |= S_DEAD;
+out_up_write:
+ up_write(&root->fs_info->subvol_sem);
+out_unlock:
+ mutex_unlock(&inode->i_mutex);
+ if (!err) {
+ shrink_dcache_sb(root->fs_info->sb);
+ btrfs_invalidate_inodes(dest);
+ d_delete(dentry);
+ }
+out_dput:
+ dput(dentry);
+out_unlock_dir:
+ mutex_unlock(&dir->i_mutex);
+ mnt_drop_write(file->f_path.mnt);
+out:
+ kfree(vol_args);
+ return err;
+}
+
static int btrfs_ioctl_defrag(struct file *file)
{
struct inode *inode = fdentry(file)->d_inode;
return ret;
}
-static long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
- u64 off, u64 olen, u64 destoff)
+static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd,
+ u64 off, u64 olen, u64 destoff)
{
struct inode *inode = fdentry(file)->d_inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
/* punch hole in destination first */
btrfs_drop_extents(trans, root, inode, off, off + len,
- off + len, 0, &hint_byte);
+ off + len, 0, &hint_byte, 1);
/* clone data */
key.objectid = src->i_ino;
datao += off - key.offset;
datal -= off - key.offset;
}
- if (key.offset + datao + datal + key.offset >
- off + len)
- datal = off + len - key.offset - datao;
+
+ if (key.offset + datal > off + len)
+ datal = off + len - key.offset;
+
/* disko == 0 means it's a hole */
if (!disko)
datao = 0;
struct inode *inode = fdentry(file)->d_inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_trans_handle *trans;
- int ret = 0;
+ int ret;
+ ret = -EPERM;
if (!capable(CAP_SYS_ADMIN))
- return -EPERM;
+ goto out;
- if (file->private_data) {
- ret = -EINPROGRESS;
+ ret = -EINPROGRESS;
+ if (file->private_data)
goto out;
- }
ret = mnt_want_write(file->f_path.mnt);
if (ret)
root->fs_info->open_ioctl_trans++;
mutex_unlock(&root->fs_info->trans_mutex);
+ ret = -ENOMEM;
trans = btrfs_start_ioctl_transaction(root, 0);
- if (trans)
- file->private_data = trans;
- else
- ret = -ENOMEM;
- /*printk(KERN_INFO "btrfs_ioctl_trans_start on %p\n", file);*/
+ if (!trans)
+ goto out_drop;
+
+ file->private_data = trans;
+ return 0;
+
+out_drop:
+ mutex_lock(&root->fs_info->trans_mutex);
+ root->fs_info->open_ioctl_trans--;
+ mutex_unlock(&root->fs_info->trans_mutex);
+ mnt_drop_write(file->f_path.mnt);
out:
return ret;
}
struct inode *inode = fdentry(file)->d_inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_trans_handle *trans;
- int ret = 0;
trans = file->private_data;
- if (!trans) {
- ret = -EINVAL;
- goto out;
- }
- btrfs_end_transaction(trans, root);
+ if (!trans)
+ return -EINVAL;
file->private_data = NULL;
+ btrfs_end_transaction(trans, root);
+
mutex_lock(&root->fs_info->trans_mutex);
root->fs_info->open_ioctl_trans--;
mutex_unlock(&root->fs_info->trans_mutex);
mnt_drop_write(file->f_path.mnt);
-
-out:
- return ret;
+ return 0;
}
long btrfs_ioctl(struct file *file, unsigned int
return btrfs_ioctl_snap_create(file, argp, 0);
case BTRFS_IOC_SUBVOL_CREATE:
return btrfs_ioctl_snap_create(file, argp, 1);
+ case BTRFS_IOC_SNAP_DESTROY:
+ return btrfs_ioctl_snap_destroy(file, argp);
case BTRFS_IOC_DEFRAG:
return btrfs_ioctl_defrag(file);
case BTRFS_IOC_RESIZE:
#define BTRFS_IOC_SUBVOL_CREATE _IOW(BTRFS_IOCTL_MAGIC, 14, \
struct btrfs_ioctl_vol_args)
-
+#define BTRFS_IOC_SNAP_DESTROY _IOW(BTRFS_IOCTL_MAGIC, 15, \
+ struct btrfs_ioctl_vol_args)
#endif
*
* len is the length of the extent
*
- * This also sets the EXTENT_ORDERED bit on the range in the inode.
- *
* The tree is given a single reference on the ordered extent that was
* inserted.
*/
entry->start = start;
entry->len = len;
entry->disk_len = disk_len;
+ entry->bytes_left = len;
entry->inode = inode;
if (type != BTRFS_ORDERED_IO_DONE && type != BTRFS_ORDERED_COMPLETE)
set_bit(type, &entry->flags);
&entry->rb_node);
BUG_ON(node);
- set_extent_ordered(&BTRFS_I(inode)->io_tree, file_offset,
- entry_end(entry) - 1, GFP_NOFS);
-
spin_lock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
list_add_tail(&entry->root_extent_list,
&BTRFS_I(inode)->root->fs_info->ordered_extents);
struct btrfs_ordered_inode_tree *tree;
struct rb_node *node;
struct btrfs_ordered_extent *entry;
- struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
int ret;
tree = &BTRFS_I(inode)->ordered_tree;
mutex_lock(&tree->mutex);
- clear_extent_ordered(io_tree, file_offset, file_offset + io_size - 1,
- GFP_NOFS);
node = tree_search(tree, file_offset);
if (!node) {
ret = 1;
goto out;
}
- ret = test_range_bit(io_tree, entry->file_offset,
- entry->file_offset + entry->len - 1,
- EXTENT_ORDERED, 0);
- if (ret == 0)
+ if (io_size > entry->bytes_left) {
+ printk(KERN_CRIT "bad ordered accounting left %llu size %llu\n",
+ (unsigned long long)entry->bytes_left,
+ (unsigned long long)io_size);
+ }
+ entry->bytes_left -= io_size;
+ if (entry->bytes_left == 0)
ret = test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
+ else
+ ret = 1;
out:
mutex_unlock(&tree->mutex);
return ret == 0;
tree->last = NULL;
set_bit(BTRFS_ORDERED_COMPLETE, &entry->flags);
+ spin_lock(&BTRFS_I(inode)->accounting_lock);
+ BTRFS_I(inode)->outstanding_extents--;
+ spin_unlock(&BTRFS_I(inode)->accounting_lock);
+ btrfs_unreserve_metadata_for_delalloc(BTRFS_I(inode)->root,
+ inode, 1);
+
spin_lock(&BTRFS_I(inode)->root->fs_info->ordered_extent_lock);
list_del_init(&entry->root_extent_list);
* start IO on any dirty ones so the wait doesn't stall waiting
* for pdflush to find them
*/
- btrfs_fdatawrite_range(inode->i_mapping, start, end, WB_SYNC_ALL);
+ filemap_fdatawrite_range(inode->i_mapping, start, end);
if (wait) {
wait_event(entry->wait, test_bit(BTRFS_ORDERED_COMPLETE,
&entry->flags));
u64 orig_end;
u64 wait_end;
struct btrfs_ordered_extent *ordered;
+ int found;
if (start + len < start) {
orig_end = INT_LIMIT(loff_t);
/* start IO across the range first to instantiate any delalloc
* extents
*/
- btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
+ filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
/* The compression code will leave pages locked but return from
* writepage without setting the page writeback. Starting again
* with WB_SYNC_ALL will end up waiting for the IO to actually start.
*/
- btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
+ filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
- btrfs_wait_on_page_writeback_range(inode->i_mapping,
- start >> PAGE_CACHE_SHIFT,
- orig_end >> PAGE_CACHE_SHIFT);
+ filemap_fdatawait_range(inode->i_mapping, start, orig_end);
end = orig_end;
+ found = 0;
while (1) {
ordered = btrfs_lookup_first_ordered_extent(inode, end);
if (!ordered)
btrfs_put_ordered_extent(ordered);
break;
}
+ found++;
btrfs_start_ordered_extent(inode, ordered, 1);
end = ordered->file_offset;
btrfs_put_ordered_extent(ordered);
break;
end--;
}
- if (test_range_bit(&BTRFS_I(inode)->io_tree, start, orig_end,
- EXTENT_ORDERED | EXTENT_DELALLOC, 0)) {
+ if (found || test_range_bit(&BTRFS_I(inode)->io_tree, start, orig_end,
+ EXTENT_DELALLOC, 0, NULL)) {
schedule_timeout(1);
goto again;
}
*/
if (test_range_bit(io_tree, disk_i_size,
ordered->file_offset + ordered->len - 1,
- EXTENT_DELALLOC, 0)) {
+ EXTENT_DELALLOC, 0, NULL)) {
goto out;
}
/*
*/
if (i_size_test > entry_end(ordered) &&
!test_range_bit(io_tree, entry_end(ordered), i_size_test - 1,
- EXTENT_DELALLOC, 0)) {
+ EXTENT_DELALLOC, 0, NULL)) {
new_i_size = min_t(u64, i_size_test, i_size_read(inode));
}
BTRFS_I(inode)->disk_i_size = new_i_size;
}
-/**
- * taken from mm/filemap.c because it isn't exported
- *
- * __filemap_fdatawrite_range - start writeback on mapping dirty pages in range
- * @mapping: address space structure to write
- * @start: offset in bytes where the range starts
- * @end: offset in bytes where the range ends (inclusive)
- * @sync_mode: enable synchronous operation
- *
- * Start writeback against all of a mapping's dirty pages that lie
- * within the byte offsets <start, end> inclusive.
- *
- * If sync_mode is WB_SYNC_ALL then this is a "data integrity" operation, as
- * opposed to a regular memory cleansing writeback. The difference between
- * these two operations is that if a dirty page/buffer is encountered, it must
- * be waited upon, and not just skipped over.
- */
-int btrfs_fdatawrite_range(struct address_space *mapping, loff_t start,
- loff_t end, int sync_mode)
-{
- struct writeback_control wbc = {
- .sync_mode = sync_mode,
- .nr_to_write = mapping->nrpages * 2,
- .range_start = start,
- .range_end = end,
- };
- return btrfs_writepages(mapping, &wbc);
-}
-
-/**
- * taken from mm/filemap.c because it isn't exported
- *
- * wait_on_page_writeback_range - wait for writeback to complete
- * @mapping: target address_space
- * @start: beginning page index
- * @end: ending page index
- *
- * Wait for writeback to complete against pages indexed by start->end
- * inclusive
- */
-int btrfs_wait_on_page_writeback_range(struct address_space *mapping,
- pgoff_t start, pgoff_t end)
-{
- struct pagevec pvec;
- int nr_pages;
- int ret = 0;
- pgoff_t index;
-
- if (end < start)
- return 0;
-
- pagevec_init(&pvec, 0);
- index = start;
- while ((index <= end) &&
- (nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
- PAGECACHE_TAG_WRITEBACK,
- min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1)) != 0) {
- unsigned i;
-
- for (i = 0; i < nr_pages; i++) {
- struct page *page = pvec.pages[i];
-
- /* until radix tree lookup accepts end_index */
- if (page->index > end)
- continue;
-
- wait_on_page_writeback(page);
- if (PageError(page))
- ret = -EIO;
- }
- pagevec_release(&pvec);
- cond_resched();
- }
-
- /* Check for outstanding write errors */
- if (test_and_clear_bit(AS_ENOSPC, &mapping->flags))
- ret = -ENOSPC;
- if (test_and_clear_bit(AS_EIO, &mapping->flags))
- ret = -EIO;
-
- return ret;
-}
-
/*
* add a given inode to the list of inodes that must be fully on
* disk before a transaction commit finishes.
/* extent length on disk */
u64 disk_len;
+ /* number of bytes that still need writing */
+ u64 bytes_left;
+
/* flags (described above) */
unsigned long flags;
int btrfs_ordered_update_i_size(struct inode *inode,
struct btrfs_ordered_extent *ordered);
int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr, u32 *sum);
-int btrfs_wait_on_page_writeback_range(struct address_space *mapping,
- pgoff_t start, pgoff_t end);
-int btrfs_fdatawrite_range(struct address_space *mapping, loff_t start,
- loff_t end, int sync_mode);
int btrfs_wait_ordered_extents(struct btrfs_root *root, int nocow_only);
int btrfs_run_ordered_operations(struct btrfs_root *root, int wait);
int btrfs_add_ordered_operation(struct btrfs_trans_handle *trans,
btrfs_free_path(path);
return ret;
}
+
+int btrfs_find_orphan_item(struct btrfs_root *root, u64 offset)
+{
+ struct btrfs_path *path;
+ struct btrfs_key key;
+ int ret;
+
+ key.objectid = BTRFS_ORPHAN_OBJECTID;
+ key.type = BTRFS_ORPHAN_ITEM_KEY;
+ key.offset = offset;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+
+ btrfs_free_path(path);
+ return ret;
+}
int nr;
};
+#define MAX_EXTENTS 128
+
+struct file_extent_cluster {
+ u64 start;
+ u64 end;
+ u64 boundary[MAX_EXTENTS];
+ unsigned int nr;
+};
+
struct reloc_control {
/* block group to relocate */
struct btrfs_block_group_cache *block_group;
struct reloc_control *rc)
{
if (test_range_bit(&rc->processed_blocks, bytenr,
- bytenr + blocksize - 1, EXTENT_DIRTY, 1))
+ bytenr + blocksize - 1, EXTENT_DIRTY, 1, NULL))
return 1;
return 0;
}
}
static noinline_for_stack
-int relocate_inode_pages(struct inode *inode, u64 start, u64 len)
+int setup_extent_mapping(struct inode *inode, u64 start, u64 end,
+ u64 block_start)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
+ struct extent_map *em;
+ int ret = 0;
+
+ em = alloc_extent_map(GFP_NOFS);
+ if (!em)
+ return -ENOMEM;
+
+ em->start = start;
+ em->len = end + 1 - start;
+ em->block_len = em->len;
+ em->block_start = block_start;
+ em->bdev = root->fs_info->fs_devices->latest_bdev;
+ set_bit(EXTENT_FLAG_PINNED, &em->flags);
+
+ lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+ while (1) {
+ write_lock(&em_tree->lock);
+ ret = add_extent_mapping(em_tree, em);
+ write_unlock(&em_tree->lock);
+ if (ret != -EEXIST) {
+ free_extent_map(em);
+ break;
+ }
+ btrfs_drop_extent_cache(inode, start, end, 0);
+ }
+ unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
+ return ret;
+}
+
+static int relocate_file_extent_cluster(struct inode *inode,
+ struct file_extent_cluster *cluster)
{
u64 page_start;
u64 page_end;
- unsigned long i;
- unsigned long first_index;
+ u64 offset = BTRFS_I(inode)->index_cnt;
+ unsigned long index;
unsigned long last_index;
- unsigned int total_read = 0;
- unsigned int total_dirty = 0;
+ unsigned int dirty_page = 0;
struct page *page;
struct file_ra_state *ra;
- struct btrfs_ordered_extent *ordered;
- struct extent_io_tree *io_tree = &BTRFS_I(inode)->io_tree;
+ int nr = 0;
int ret = 0;
+ if (!cluster->nr)
+ return 0;
+
ra = kzalloc(sizeof(*ra), GFP_NOFS);
if (!ra)
return -ENOMEM;
+ index = (cluster->start - offset) >> PAGE_CACHE_SHIFT;
+ last_index = (cluster->end - offset) >> PAGE_CACHE_SHIFT;
+
mutex_lock(&inode->i_mutex);
- first_index = start >> PAGE_CACHE_SHIFT;
- last_index = (start + len - 1) >> PAGE_CACHE_SHIFT;
- /* make sure the dirty trick played by the caller work */
- while (1) {
- ret = invalidate_inode_pages2_range(inode->i_mapping,
- first_index, last_index);
- if (ret != -EBUSY)
- break;
- schedule_timeout(HZ/10);
- }
+ i_size_write(inode, cluster->end + 1 - offset);
+ ret = setup_extent_mapping(inode, cluster->start - offset,
+ cluster->end - offset, cluster->start);
if (ret)
goto out_unlock;
file_ra_state_init(ra, inode->i_mapping);
- for (i = first_index ; i <= last_index; i++) {
- if (total_read % ra->ra_pages == 0) {
- btrfs_force_ra(inode->i_mapping, ra, NULL, i,
- min(last_index, ra->ra_pages + i - 1));
- }
- total_read++;
-again:
- if (((u64)i << PAGE_CACHE_SHIFT) > i_size_read(inode))
- BUG_ON(1);
- page = grab_cache_page(inode->i_mapping, i);
+ WARN_ON(cluster->start != cluster->boundary[0]);
+ while (index <= last_index) {
+ page = find_lock_page(inode->i_mapping, index);
if (!page) {
- ret = -ENOMEM;
- goto out_unlock;
+ page_cache_sync_readahead(inode->i_mapping,
+ ra, NULL, index,
+ last_index + 1 - index);
+ page = grab_cache_page(inode->i_mapping, index);
+ if (!page) {
+ ret = -ENOMEM;
+ goto out_unlock;
+ }
+ }
+
+ if (PageReadahead(page)) {
+ page_cache_async_readahead(inode->i_mapping,
+ ra, NULL, page, index,
+ last_index + 1 - index);
}
+
if (!PageUptodate(page)) {
btrfs_readpage(NULL, page);
lock_page(page);
goto out_unlock;
}
}
- wait_on_page_writeback(page);
page_start = (u64)page->index << PAGE_CACHE_SHIFT;
page_end = page_start + PAGE_CACHE_SIZE - 1;
- lock_extent(io_tree, page_start, page_end, GFP_NOFS);
-
- ordered = btrfs_lookup_ordered_extent(inode, page_start);
- if (ordered) {
- unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
- unlock_page(page);
- page_cache_release(page);
- btrfs_start_ordered_extent(inode, ordered, 1);
- btrfs_put_ordered_extent(ordered);
- goto again;
- }
+
+ lock_extent(&BTRFS_I(inode)->io_tree,
+ page_start, page_end, GFP_NOFS);
+
set_page_extent_mapped(page);
- if (i == first_index)
- set_extent_bits(io_tree, page_start, page_end,
+ if (nr < cluster->nr &&
+ page_start + offset == cluster->boundary[nr]) {
+ set_extent_bits(&BTRFS_I(inode)->io_tree,
+ page_start, page_end,
EXTENT_BOUNDARY, GFP_NOFS);
+ nr++;
+ }
btrfs_set_extent_delalloc(inode, page_start, page_end);
set_page_dirty(page);
- total_dirty++;
+ dirty_page++;
- unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+ unlock_extent(&BTRFS_I(inode)->io_tree,
+ page_start, page_end, GFP_NOFS);
unlock_page(page);
page_cache_release(page);
+
+ index++;
+ if (nr < cluster->nr &&
+ page_end + 1 + offset == cluster->boundary[nr]) {
+ balance_dirty_pages_ratelimited_nr(inode->i_mapping,
+ dirty_page);
+ dirty_page = 0;
+ }
+ }
+ if (dirty_page) {
+ balance_dirty_pages_ratelimited_nr(inode->i_mapping,
+ dirty_page);
}
+ WARN_ON(nr != cluster->nr);
out_unlock:
mutex_unlock(&inode->i_mutex);
kfree(ra);
- balance_dirty_pages_ratelimited_nr(inode->i_mapping, total_dirty);
return ret;
}
static noinline_for_stack
-int relocate_data_extent(struct inode *inode, struct btrfs_key *extent_key)
+int relocate_data_extent(struct inode *inode, struct btrfs_key *extent_key,
+ struct file_extent_cluster *cluster)
{
- struct btrfs_root *root = BTRFS_I(inode)->root;
- struct extent_map_tree *em_tree = &BTRFS_I(inode)->extent_tree;
- struct extent_map *em;
- u64 start = extent_key->objectid - BTRFS_I(inode)->index_cnt;
- u64 end = start + extent_key->offset - 1;
-
- em = alloc_extent_map(GFP_NOFS);
- em->start = start;
- em->len = extent_key->offset;
- em->block_len = extent_key->offset;
- em->block_start = extent_key->objectid;
- em->bdev = root->fs_info->fs_devices->latest_bdev;
- set_bit(EXTENT_FLAG_PINNED, &em->flags);
+ int ret;
- /* setup extent map to cheat btrfs_readpage */
- lock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
- while (1) {
- int ret;
- spin_lock(&em_tree->lock);
- ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
- if (ret != -EEXIST) {
- free_extent_map(em);
- break;
- }
- btrfs_drop_extent_cache(inode, start, end, 0);
+ if (cluster->nr > 0 && extent_key->objectid != cluster->end + 1) {
+ ret = relocate_file_extent_cluster(inode, cluster);
+ if (ret)
+ return ret;
+ cluster->nr = 0;
}
- unlock_extent(&BTRFS_I(inode)->io_tree, start, end, GFP_NOFS);
- return relocate_inode_pages(inode, start, extent_key->offset);
+ if (!cluster->nr)
+ cluster->start = extent_key->objectid;
+ else
+ BUG_ON(cluster->nr >= MAX_EXTENTS);
+ cluster->end = extent_key->objectid + extent_key->offset - 1;
+ cluster->boundary[cluster->nr] = extent_key->objectid;
+ cluster->nr++;
+
+ if (cluster->nr >= MAX_EXTENTS) {
+ ret = relocate_file_extent_cluster(inode, cluster);
+ if (ret)
+ return ret;
+ cluster->nr = 0;
+ }
+ return 0;
}
#ifdef BTRFS_COMPAT_EXTENT_TREE_V0
return 0;
}
+
static noinline_for_stack int relocate_block_group(struct reloc_control *rc)
{
struct rb_root blocks = RB_ROOT;
struct btrfs_key key;
+ struct file_extent_cluster *cluster;
struct btrfs_trans_handle *trans = NULL;
struct btrfs_path *path;
struct btrfs_extent_item *ei;
int ret;
int err = 0;
+ cluster = kzalloc(sizeof(*cluster), GFP_NOFS);
+ if (!cluster)
+ return -ENOMEM;
+
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
+ rc->extents_found = 0;
+ rc->extents_skipped = 0;
+
rc->search_start = rc->block_group->key.objectid;
clear_extent_bits(&rc->processed_blocks, 0, (u64)-1, EXTENT_DIRTY,
GFP_NOFS);
}
nr = trans->blocks_used;
- btrfs_end_transaction_throttle(trans, rc->extent_root);
+ btrfs_end_transaction(trans, rc->extent_root);
trans = NULL;
btrfs_btree_balance_dirty(rc->extent_root, nr);
if (rc->stage == MOVE_DATA_EXTENTS &&
(flags & BTRFS_EXTENT_FLAG_DATA)) {
rc->found_file_extent = 1;
- ret = relocate_data_extent(rc->data_inode, &key);
+ ret = relocate_data_extent(rc->data_inode,
+ &key, cluster);
if (ret < 0) {
err = ret;
break;
btrfs_btree_balance_dirty(rc->extent_root, nr);
}
+ if (!err) {
+ ret = relocate_file_extent_cluster(rc->data_inode, cluster);
+ if (ret < 0)
+ err = ret;
+ }
+
+ kfree(cluster);
+
rc->create_reloc_root = 0;
smp_mb();
}
static int __insert_orphan_inode(struct btrfs_trans_handle *trans,
- struct btrfs_root *root,
- u64 objectid, u64 size)
+ struct btrfs_root *root, u64 objectid)
{
struct btrfs_path *path;
struct btrfs_inode_item *item;
item = btrfs_item_ptr(leaf, path->slots[0], struct btrfs_inode_item);
memset_extent_buffer(leaf, 0, (unsigned long)item, sizeof(*item));
btrfs_set_inode_generation(leaf, item, 1);
- btrfs_set_inode_size(leaf, item, size);
+ btrfs_set_inode_size(leaf, item, 0);
btrfs_set_inode_mode(leaf, item, S_IFREG | 0600);
btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS);
btrfs_mark_buffer_dirty(leaf);
if (err)
goto out;
- err = __insert_orphan_inode(trans, root, objectid, group->key.offset);
- BUG_ON(err);
-
- err = btrfs_insert_file_extent(trans, root, objectid, 0, 0, 0,
- group->key.offset, 0, group->key.offset,
- 0, 0, 0);
+ err = __insert_orphan_inode(trans, root, objectid);
BUG_ON(err);
key.objectid = objectid;
BUG_ON(!rc->block_group);
btrfs_init_workers(&rc->workers, "relocate",
- fs_info->thread_pool_size);
+ fs_info->thread_pool_size, NULL);
rc->extent_root = extent_root;
btrfs_prepare_block_group_relocation(extent_root, rc->block_group);
btrfs_wait_ordered_extents(fs_info->tree_root, 0);
while (1) {
- mutex_lock(&fs_info->cleaner_mutex);
- btrfs_clean_old_snapshots(fs_info->tree_root);
- mutex_unlock(&fs_info->cleaner_mutex);
-
rc->extents_found = 0;
rc->extents_skipped = 0;
+ mutex_lock(&fs_info->cleaner_mutex);
+
+ btrfs_clean_old_snapshots(fs_info->tree_root);
ret = relocate_block_group(rc);
+
+ mutex_unlock(&fs_info->cleaner_mutex);
if (ret < 0) {
err = ret;
break;
}
}
- filemap_fdatawrite_range(fs_info->btree_inode->i_mapping,
- rc->block_group->key.objectid,
- rc->block_group->key.objectid +
- rc->block_group->key.offset - 1);
+ filemap_write_and_wait_range(fs_info->btree_inode->i_mapping,
+ rc->block_group->key.objectid,
+ rc->block_group->key.objectid +
+ rc->block_group->key.offset - 1);
WARN_ON(rc->block_group->pinned > 0);
WARN_ON(rc->block_group->reserved > 0);
return err;
}
+static noinline_for_stack int mark_garbage_root(struct btrfs_root *root)
+{
+ struct btrfs_trans_handle *trans;
+ int ret;
+
+ trans = btrfs_start_transaction(root->fs_info->tree_root, 1);
+
+ memset(&root->root_item.drop_progress, 0,
+ sizeof(root->root_item.drop_progress));
+ root->root_item.drop_level = 0;
+ btrfs_set_root_refs(&root->root_item, 0);
+ ret = btrfs_update_root(trans, root->fs_info->tree_root,
+ &root->root_key, &root->root_item);
+ BUG_ON(ret);
+
+ ret = btrfs_end_transaction(trans, root->fs_info->tree_root);
+ BUG_ON(ret);
+ return 0;
+}
+
/*
* recover relocation interrupted by system crash.
*
fs_root = read_fs_root(root->fs_info,
reloc_root->root_key.offset);
if (IS_ERR(fs_root)) {
- err = PTR_ERR(fs_root);
- goto out;
+ ret = PTR_ERR(fs_root);
+ if (ret != -ENOENT) {
+ err = ret;
+ goto out;
+ }
+ mark_garbage_root(reloc_root);
}
}
mapping_tree_init(&rc->reloc_root_tree);
INIT_LIST_HEAD(&rc->reloc_roots);
btrfs_init_workers(&rc->workers, "relocate",
- root->fs_info->thread_pool_size);
+ root->fs_info->thread_pool_size, NULL);
rc->extent_root = root->fs_info->extent_root;
set_reloc_control(rc);
goto out;
BUG_ON(ret == 0);
+ if (path->slots[0] == 0) {
+ ret = 1;
+ goto out;
+ }
l = path->nodes[0];
- BUG_ON(path->slots[0] == 0);
slot = path->slots[0] - 1;
btrfs_item_key_to_cpu(l, &found_key, slot);
- if (found_key.objectid != objectid) {
+ if (found_key.objectid != objectid ||
+ found_key.type != BTRFS_ROOT_ITEM_KEY) {
ret = 1;
goto out;
}
- read_extent_buffer(l, item, btrfs_item_ptr_offset(l, slot),
- sizeof(*item));
- memcpy(key, &found_key, sizeof(found_key));
+ if (item)
+ read_extent_buffer(l, item, btrfs_item_ptr_offset(l, slot),
+ sizeof(*item));
+ if (key)
+ memcpy(key, &found_key, sizeof(found_key));
ret = 0;
out:
btrfs_free_path(path);
return ret;
}
+int btrfs_find_orphan_roots(struct btrfs_root *tree_root)
+{
+ struct extent_buffer *leaf;
+ struct btrfs_path *path;
+ struct btrfs_key key;
+ int err = 0;
+ int ret;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+
+ key.objectid = BTRFS_ORPHAN_OBJECTID;
+ key.type = BTRFS_ORPHAN_ITEM_KEY;
+ key.offset = 0;
+
+ while (1) {
+ ret = btrfs_search_slot(NULL, tree_root, &key, path, 0, 0);
+ if (ret < 0) {
+ err = ret;
+ break;
+ }
+
+ leaf = path->nodes[0];
+ if (path->slots[0] >= btrfs_header_nritems(leaf)) {
+ ret = btrfs_next_leaf(tree_root, path);
+ if (ret < 0)
+ err = ret;
+ if (ret != 0)
+ break;
+ leaf = path->nodes[0];
+ }
+
+ btrfs_item_key_to_cpu(leaf, &key, path->slots[0]);
+ btrfs_release_path(tree_root, path);
+
+ if (key.objectid != BTRFS_ORPHAN_OBJECTID ||
+ key.type != BTRFS_ORPHAN_ITEM_KEY)
+ break;
+
+ ret = btrfs_find_dead_roots(tree_root, key.offset);
+ if (ret) {
+ err = ret;
+ break;
+ }
+
+ key.offset++;
+ }
+
+ btrfs_free_path(path);
+ return err;
+}
+
/* drop the root item for 'key' from 'root' */
int btrfs_del_root(struct btrfs_trans_handle *trans, struct btrfs_root *root,
struct btrfs_key *key)
return ret;
}
-#if 0 /* this will get used when snapshot deletion is implemented */
int btrfs_del_root_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *tree_root,
- u64 root_id, u8 type, u64 ref_id)
+ u64 root_id, u64 ref_id, u64 dirid, u64 *sequence,
+ const char *name, int name_len)
+
{
+ struct btrfs_path *path;
+ struct btrfs_root_ref *ref;
+ struct extent_buffer *leaf;
struct btrfs_key key;
+ unsigned long ptr;
+ int err = 0;
int ret;
- struct btrfs_path *path;
path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
key.objectid = root_id;
- key.type = type;
+ key.type = BTRFS_ROOT_BACKREF_KEY;
key.offset = ref_id;
-
+again:
ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
- BUG_ON(ret);
-
- ret = btrfs_del_item(trans, tree_root, path);
- BUG_ON(ret);
+ BUG_ON(ret < 0);
+ if (ret == 0) {
+ leaf = path->nodes[0];
+ ref = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_root_ref);
+
+ WARN_ON(btrfs_root_ref_dirid(leaf, ref) != dirid);
+ WARN_ON(btrfs_root_ref_name_len(leaf, ref) != name_len);
+ ptr = (unsigned long)(ref + 1);
+ WARN_ON(memcmp_extent_buffer(leaf, name, ptr, name_len));
+ *sequence = btrfs_root_ref_sequence(leaf, ref);
+
+ ret = btrfs_del_item(trans, tree_root, path);
+ BUG_ON(ret);
+ } else
+ err = -ENOENT;
+
+ if (key.type == BTRFS_ROOT_BACKREF_KEY) {
+ btrfs_release_path(tree_root, path);
+ key.objectid = ref_id;
+ key.type = BTRFS_ROOT_REF_KEY;
+ key.offset = root_id;
+ goto again;
+ }
btrfs_free_path(path);
- return ret;
+ return err;
}
-#endif
int btrfs_find_root_ref(struct btrfs_root *tree_root,
struct btrfs_path *path,
return ret;
}
-
/*
* add a btrfs_root_ref item. type is either BTRFS_ROOT_REF_KEY
* or BTRFS_ROOT_BACKREF_KEY.
*/
int btrfs_add_root_ref(struct btrfs_trans_handle *trans,
struct btrfs_root *tree_root,
- u64 root_id, u8 type, u64 ref_id,
- u64 dirid, u64 sequence,
+ u64 root_id, u64 ref_id, u64 dirid, u64 sequence,
const char *name, int name_len)
{
struct btrfs_key key;
struct extent_buffer *leaf;
unsigned long ptr;
-
path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
key.objectid = root_id;
- key.type = type;
+ key.type = BTRFS_ROOT_BACKREF_KEY;
key.offset = ref_id;
-
+again:
ret = btrfs_insert_empty_item(trans, tree_root, path, &key,
sizeof(*ref) + name_len);
BUG_ON(ret);
write_extent_buffer(leaf, name, ptr, name_len);
btrfs_mark_buffer_dirty(leaf);
+ if (key.type == BTRFS_ROOT_BACKREF_KEY) {
+ btrfs_release_path(tree_root, path);
+ key.objectid = ref_id;
+ key.type = BTRFS_ROOT_REF_KEY;
+ key.offset = root_id;
+ goto again;
+ }
+
btrfs_free_path(path);
- return ret;
+ return 0;
}
Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
Opt_ssd, Opt_nossd, Opt_ssd_spread, Opt_thread_pool, Opt_noacl,
- Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit, Opt_err,
+ Opt_compress, Opt_notreelog, Opt_ratio, Opt_flushoncommit,
+ Opt_discard, Opt_err,
};
static match_table_t tokens = {
{Opt_notreelog, "notreelog"},
{Opt_flushoncommit, "flushoncommit"},
{Opt_ratio, "metadata_ratio=%d"},
+ {Opt_discard, "discard"},
{Opt_err, NULL},
};
info->metadata_ratio);
}
break;
+ case Opt_discard:
+ btrfs_set_opt(info->mount_opt, DISCARD);
+ break;
default:
break;
}
sb->s_export_op = &btrfs_export_ops;
sb->s_xattr = btrfs_xattr_handlers;
sb->s_time_gran = 1;
+#ifdef CONFIG_BTRFS_FS_POSIX_ACL
sb->s_flags |= MS_POSIXACL;
+#endif
tree_root = open_ctree(sb, fs_devices, (char *)data);
}
static const struct super_operations btrfs_super_ops = {
+ .drop_inode = btrfs_drop_inode,
.delete_inode = btrfs_delete_inode,
.put_super = btrfs_put_super,
.sync_fs = btrfs_sync_fs,
{
if (root->ref_cows && root->last_trans < trans->transid) {
WARN_ON(root == root->fs_info->extent_root);
- WARN_ON(root->root_item.refs == 0);
WARN_ON(root->commit_root != root->node);
radix_tree_tag_set(&root->fs_info->fs_roots_radix,
h->alloc_exclude_start = 0;
h->delayed_ref_updates = 0;
+ if (!current->journal_info)
+ current->journal_info = h;
+
root->fs_info->running_transaction->use_count++;
record_root_in_trans(h, root);
mutex_unlock(&root->fs_info->trans_mutex);
wake_up(&cur_trans->writer_wait);
put_transaction(cur_trans);
mutex_unlock(&info->trans_mutex);
+
+ if (current->journal_info == trans)
+ current->journal_info = NULL;
memset(trans, 0, sizeof(*trans));
kmem_cache_free(btrfs_trans_handle_cachep, trans);
/*
* when btree blocks are allocated, they have some corresponding bits set for
* them in one of two extent_io trees. This is used to make sure all of
- * those extents are on disk for transaction or log commit
+ * those extents are sent to disk but does not wait on them
*/
-int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
- struct extent_io_tree *dirty_pages)
+int btrfs_write_marked_extents(struct btrfs_root *root,
+ struct extent_io_tree *dirty_pages)
{
int ret;
int err = 0;
page_cache_release(page);
}
}
+ if (err)
+ werr = err;
+ return werr;
+}
+
+/*
+ * when btree blocks are allocated, they have some corresponding bits set for
+ * them in one of two extent_io trees. This is used to make sure all of
+ * those extents are on disk for transaction or log commit. We wait
+ * on all the pages and clear them from the dirty pages state tree
+ */
+int btrfs_wait_marked_extents(struct btrfs_root *root,
+ struct extent_io_tree *dirty_pages)
+{
+ int ret;
+ int err = 0;
+ int werr = 0;
+ struct page *page;
+ struct inode *btree_inode = root->fs_info->btree_inode;
+ u64 start = 0;
+ u64 end;
+ unsigned long index;
+
while (1) {
ret = find_first_extent_bit(dirty_pages, 0, &start, &end,
EXTENT_DIRTY);
return werr;
}
+/*
+ * when btree blocks are allocated, they have some corresponding bits set for
+ * them in one of two extent_io trees. This is used to make sure all of
+ * those extents are on disk for transaction or log commit
+ */
+int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
+ struct extent_io_tree *dirty_pages)
+{
+ int ret;
+ int ret2;
+
+ ret = btrfs_write_marked_extents(root, dirty_pages);
+ ret2 = btrfs_wait_marked_extents(root, dirty_pages);
+ return ret || ret2;
+}
+
int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root)
{
memcpy(new_root_item, &root->root_item, sizeof(*new_root_item));
key.objectid = objectid;
- key.offset = 0;
+ /* record when the snapshot was created in key.offset */
+ key.offset = trans->transid;
btrfs_set_key_type(&key, BTRFS_ROOT_ITEM_KEY);
old = btrfs_lock_root_node(root);
memcpy(&pending->root_key, &key, sizeof(key));
fail:
kfree(new_root_item);
+ btrfs_unreserve_metadata_space(root, 6);
return ret;
}
ret = btrfs_update_inode(trans, parent_root, parent_inode);
BUG_ON(ret);
- /* add the backref first */
ret = btrfs_add_root_ref(trans, parent_root->fs_info->tree_root,
pending->root_key.objectid,
- BTRFS_ROOT_BACKREF_KEY,
parent_root->root_key.objectid,
parent_inode->i_ino, index, pending->name,
namelen);
BUG_ON(ret);
- /* now add the forward ref */
- ret = btrfs_add_root_ref(trans, parent_root->fs_info->tree_root,
- parent_root->root_key.objectid,
- BTRFS_ROOT_REF_KEY,
- pending->root_key.objectid,
- parent_inode->i_ino, index, pending->name,
- namelen);
-
inode = btrfs_lookup_dentry(parent_inode, pending->dentry);
d_instantiate(pending->dentry, inode);
fail:
unsigned long timeout = 1;
struct btrfs_transaction *cur_trans;
struct btrfs_transaction *prev_trans = NULL;
- struct extent_io_tree *pinned_copy;
DEFINE_WAIT(wait);
int ret;
int should_grow = 0;
return 0;
}
- pinned_copy = kmalloc(sizeof(*pinned_copy), GFP_NOFS);
- if (!pinned_copy)
- return -ENOMEM;
-
- extent_io_tree_init(pinned_copy,
- root->fs_info->btree_inode->i_mapping, GFP_NOFS);
-
trans->transaction->in_commit = 1;
trans->transaction->blocked = 1;
if (cur_trans->list.prev != &root->fs_info->trans_list) {
ret = commit_cowonly_roots(trans, root);
BUG_ON(ret);
+ btrfs_prepare_extent_commit(trans, root);
+
cur_trans = root->fs_info->running_transaction;
spin_lock(&root->fs_info->new_trans_lock);
root->fs_info->running_transaction = NULL;
memcpy(&root->fs_info->super_for_commit, &root->fs_info->super_copy,
sizeof(root->fs_info->super_copy));
- btrfs_copy_pinned(root, pinned_copy);
-
trans->transaction->blocked = 0;
wake_up(&root->fs_info->transaction_wait);
*/
mutex_unlock(&root->fs_info->tree_log_mutex);
- btrfs_finish_extent_commit(trans, root, pinned_copy);
- kfree(pinned_copy);
+ btrfs_finish_extent_commit(trans, root);
/* do the directory inserts of any pending snapshot creations */
finish_pending_snapshots(trans, root->fs_info);
mutex_unlock(&root->fs_info->trans_mutex);
+ if (current->journal_info == trans)
+ current->journal_info = NULL;
+
kmem_cache_free(btrfs_trans_handle_cachep, trans);
return ret;
}
while (!list_empty(&list)) {
root = list_entry(list.next, struct btrfs_root, root_list);
- list_del_init(&root->root_list);
- btrfs_drop_snapshot(root, 0);
+ list_del(&root->root_list);
+
+ if (btrfs_header_backref_rev(root->node) <
+ BTRFS_MIXED_BACKREF_REV)
+ btrfs_drop_snapshot(root, 0);
+ else
+ btrfs_drop_snapshot(root, 1);
}
return 0;
}
struct inode *inode)
{
BTRFS_I(inode)->last_trans = trans->transaction->transid;
+ BTRFS_I(inode)->last_sub_trans = BTRFS_I(inode)->root->log_transid;
}
int btrfs_end_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
struct extent_io_tree *dirty_pages);
+int btrfs_write_marked_extents(struct btrfs_root *root,
+ struct extent_io_tree *dirty_pages);
+int btrfs_wait_marked_extents(struct btrfs_root *root,
+ struct extent_io_tree *dirty_pages);
int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
#endif
mutex_lock(&root->log_mutex);
if (root->log_root) {
+ if (!root->log_start_pid) {
+ root->log_start_pid = current->pid;
+ root->log_multiple_pids = false;
+ } else if (root->log_start_pid != current->pid) {
+ root->log_multiple_pids = true;
+ }
+
root->log_batch++;
atomic_inc(&root->log_writers);
mutex_unlock(&root->log_mutex);
return 0;
}
+ root->log_multiple_pids = false;
+ root->log_start_pid = current->pid;
mutex_lock(&root->fs_info->tree_log_mutex);
if (!root->fs_info->log_root_tree) {
ret = btrfs_init_log_root_tree(trans, root->fs_info);
struct walk_control *wc, u64 gen)
{
if (wc->pin)
- btrfs_update_pinned_extents(log->fs_info->extent_root,
- eb->start, eb->len, 1);
+ btrfs_pin_extent(log->fs_info->extent_root,
+ eb->start, eb->len, 0);
if (btrfs_buffer_uptodate(eb, gen)) {
if (wc->write)
saved_nbytes = inode_get_bytes(inode);
/* drop any overlapping extents */
ret = btrfs_drop_extents(trans, root, inode,
- start, extent_end, extent_end, start, &alloc_hint);
+ start, extent_end, extent_end, start, &alloc_hint, 1);
BUG_ON(ret);
if (found_type == BTRFS_FILE_EXTENT_REG ||
int ret;
struct btrfs_root *log = root->log_root;
struct btrfs_root *log_root_tree = root->fs_info->log_root_tree;
+ u64 log_transid = 0;
mutex_lock(&root->log_mutex);
index1 = root->log_transid % 2;
while (1) {
unsigned long batch = root->log_batch;
- mutex_unlock(&root->log_mutex);
- schedule_timeout_uninterruptible(1);
- mutex_lock(&root->log_mutex);
-
+ if (root->log_multiple_pids) {
+ mutex_unlock(&root->log_mutex);
+ schedule_timeout_uninterruptible(1);
+ mutex_lock(&root->log_mutex);
+ }
wait_for_writer(trans, root);
if (batch == root->log_batch)
break;
goto out;
}
- ret = btrfs_write_and_wait_marked_extents(log, &log->dirty_log_pages);
+ /* we start IO on all the marked extents here, but we don't actually
+ * wait for them until later.
+ */
+ ret = btrfs_write_marked_extents(log, &log->dirty_log_pages);
BUG_ON(ret);
btrfs_set_root_node(&log->root_item, log->node);
root->log_batch = 0;
+ log_transid = root->log_transid;
root->log_transid++;
log->log_transid = root->log_transid;
+ root->log_start_pid = 0;
smp_mb();
/*
* log tree has been flushed to disk, new modifications of
index2 = log_root_tree->log_transid % 2;
if (atomic_read(&log_root_tree->log_commit[index2])) {
+ btrfs_wait_marked_extents(log, &log->dirty_log_pages);
wait_log_commit(trans, log_root_tree,
log_root_tree->log_transid);
mutex_unlock(&log_root_tree->log_mutex);
* check the full commit flag again
*/
if (root->fs_info->last_trans_log_full_commit == trans->transid) {
+ btrfs_wait_marked_extents(log, &log->dirty_log_pages);
mutex_unlock(&log_root_tree->log_mutex);
ret = -EAGAIN;
goto out_wake_log_root;
ret = btrfs_write_and_wait_marked_extents(log_root_tree,
&log_root_tree->dirty_log_pages);
BUG_ON(ret);
+ btrfs_wait_marked_extents(log, &log->dirty_log_pages);
btrfs_set_super_log_root(&root->fs_info->super_for_commit,
log_root_tree->node->start);
* the running transaction open, so a full commit can't hop
* in and cause problems either.
*/
- write_ctree_super(trans, root->fs_info->tree_root, 2);
+ write_ctree_super(trans, root->fs_info->tree_root, 1);
ret = 0;
+ mutex_lock(&root->log_mutex);
+ if (root->last_log_commit < log_transid)
+ root->last_log_commit = log_transid;
+ mutex_unlock(&root->log_mutex);
+
out_wake_log_root:
atomic_set(&log_root_tree->log_commit[index2], 0);
smp_mb();
if (!parent || !parent->d_inode || sb != parent->d_inode->i_sb)
break;
- if (parent == sb->s_root)
+ if (IS_ROOT(parent))
break;
parent = parent->d_parent;
return ret;
}
+static int inode_in_log(struct btrfs_trans_handle *trans,
+ struct inode *inode)
+{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ int ret = 0;
+
+ mutex_lock(&root->log_mutex);
+ if (BTRFS_I(inode)->logged_trans == trans->transid &&
+ BTRFS_I(inode)->last_sub_trans <= root->last_log_commit)
+ ret = 1;
+ mutex_unlock(&root->log_mutex);
+ return ret;
+}
+
+
/*
* helper function around btrfs_log_inode to make sure newly created
* parent directories also end up in the log. A minimal inode and backref
goto end_no_trans;
}
+ if (root != BTRFS_I(inode)->root ||
+ btrfs_root_refs(&root->root_item) == 0) {
+ ret = 1;
+ goto end_no_trans;
+ }
+
ret = check_parent_dirs_for_sync(trans, inode, parent,
sb, last_committed);
if (ret)
goto end_no_trans;
+ if (inode_in_log(trans, inode)) {
+ ret = BTRFS_NO_LOG_SYNC;
+ goto end_no_trans;
+ }
+
start_log_trans(trans, root);
ret = btrfs_log_inode(trans, root, inode, inode_only);
break;
inode = parent->d_inode;
+ if (root != BTRFS_I(inode)->root)
+ break;
+
if (BTRFS_I(inode)->generation >
root->fs_info->last_trans_committed) {
ret = btrfs_log_inode(trans, root, inode, inode_only);
BUG_ON(ret);
}
- if (parent == sb->s_root)
+ if (IS_ROOT(parent))
break;
parent = parent->d_parent;
struct btrfs_key tmp_key;
struct btrfs_root *log;
struct btrfs_fs_info *fs_info = log_root_tree->fs_info;
- u64 highest_inode;
struct walk_control wc = {
.process_func = process_one_buffer,
.stage = 0,
path);
BUG_ON(ret);
}
- ret = btrfs_find_highest_inode(wc.replay_dest, &highest_inode);
- if (ret == 0) {
- wc.replay_dest->highest_inode = highest_inode;
- wc.replay_dest->last_inode_alloc = highest_inode;
- }
key.offset = found_key.offset - 1;
wc.replay_dest->log_root = NULL;
#ifndef __TREE_LOG_
#define __TREE_LOG_
+/* return value for btrfs_log_dentry_safe that means we don't need to log it at all */
+#define BTRFS_NO_LOG_SYNC 256
+
int btrfs_sync_log(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
int btrfs_free_log(struct btrfs_trans_handle *trans, struct btrfs_root *root);
* is now congested. Back off and let other work structs
* run instead
*/
- if (pending && bdi_write_congested(bdi) && batch_run > 32 &&
+ if (pending && bdi_write_congested(bdi) && batch_run > 8 &&
fs_info->fs_devices->open_devices > 1) {
struct io_context *ioc;
goto error;
device->name = kstrdup(orig_dev->name, GFP_NOFS);
- if (!device->name)
+ if (!device->name) {
+ kfree(device);
goto error;
+ }
device->devid = orig_dev->devid;
device->work.func = pending_bios_fn;
* called very infrequently and that a given device has a small number
* of extents
*/
-static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
- struct btrfs_device *device,
- u64 num_bytes, u64 *start,
- u64 *max_avail)
+int find_free_dev_extent(struct btrfs_trans_handle *trans,
+ struct btrfs_device *device, u64 num_bytes,
+ u64 *start, u64 *max_avail)
{
struct btrfs_key key;
struct btrfs_root *root = device->dev_root;
extent_root = root->fs_info->extent_root;
em_tree = &root->fs_info->mapping_tree.map_tree;
+ ret = btrfs_can_relocate(extent_root, chunk_offset);
+ if (ret)
+ return -ENOSPC;
+
/* step one, relocate all the extents inside this chunk */
ret = btrfs_relocate_block_group(extent_root, chunk_offset);
BUG_ON(ret);
* step two, delete the device extents and the
* chunk tree entries
*/
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, chunk_offset, 1);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
BUG_ON(em->start > chunk_offset ||
em->start + em->len < chunk_offset);
ret = btrfs_remove_block_group(trans, extent_root, chunk_offset);
BUG_ON(ret);
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
remove_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
kfree(map);
em->bdev = NULL;
struct btrfs_key found_key;
u64 chunk_tree = chunk_root->root_key.objectid;
u64 chunk_type;
+ bool retried = false;
+ int failed = 0;
int ret;
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
+again:
key.objectid = BTRFS_FIRST_CHUNK_TREE_OBJECTID;
key.offset = (u64)-1;
key.type = BTRFS_CHUNK_ITEM_KEY;
ret = btrfs_relocate_chunk(chunk_root, chunk_tree,
found_key.objectid,
found_key.offset);
- BUG_ON(ret);
+ if (ret == -ENOSPC)
+ failed++;
+ else if (ret)
+ BUG();
}
if (found_key.offset == 0)
key.offset = found_key.offset - 1;
}
ret = 0;
+ if (failed && !retried) {
+ failed = 0;
+ retried = true;
+ goto again;
+ } else if (failed && retried) {
+ WARN_ON(1);
+ ret = -ENOSPC;
+ }
error:
btrfs_free_path(path);
return ret;
continue;
ret = btrfs_shrink_device(device, old_size - size_to_free);
+ if (ret == -ENOSPC)
+ break;
BUG_ON(ret);
trans = btrfs_start_transaction(dev_root, 1);
chunk = btrfs_item_ptr(path->nodes[0],
path->slots[0],
struct btrfs_chunk);
- key.offset = found_key.offset;
/* chunk zero is special */
- if (key.offset == 0)
+ if (found_key.offset == 0)
break;
btrfs_release_path(chunk_root, path);
chunk_root->root_key.objectid,
found_key.objectid,
found_key.offset);
- BUG_ON(ret);
+ BUG_ON(ret && ret != -ENOSPC);
+ key.offset = found_key.offset - 1;
}
ret = 0;
error:
u64 chunk_offset;
int ret;
int slot;
+ int failed = 0;
+ bool retried = false;
struct extent_buffer *l;
struct btrfs_key key;
struct btrfs_super_block *super_copy = &root->fs_info->super_copy;
u64 old_total = btrfs_super_total_bytes(super_copy);
+ u64 old_size = device->total_bytes;
u64 diff = device->total_bytes - new_size;
if (new_size >= device->total_bytes)
if (!path)
return -ENOMEM;
- trans = btrfs_start_transaction(root, 1);
- if (!trans) {
- ret = -ENOMEM;
- goto done;
- }
-
path->reada = 2;
lock_chunks(root);
if (device->writeable)
device->fs_devices->total_rw_bytes -= diff;
unlock_chunks(root);
- btrfs_end_transaction(trans, root);
+again:
key.objectid = device->devid;
key.offset = (u64)-1;
key.type = BTRFS_DEV_EXTENT_KEY;
goto done;
if (ret) {
ret = 0;
+ btrfs_release_path(root, path);
break;
}
slot = path->slots[0];
btrfs_item_key_to_cpu(l, &key, path->slots[0]);
- if (key.objectid != device->devid)
+ if (key.objectid != device->devid) {
+ btrfs_release_path(root, path);
break;
+ }
dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
length = btrfs_dev_extent_length(l, dev_extent);
- if (key.offset + length <= new_size)
+ if (key.offset + length <= new_size) {
+ btrfs_release_path(root, path);
break;
+ }
chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent);
chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent);
ret = btrfs_relocate_chunk(root, chunk_tree, chunk_objectid,
chunk_offset);
- if (ret)
+ if (ret && ret != -ENOSPC)
goto done;
+ if (ret == -ENOSPC)
+ failed++;
+ key.offset -= 1;
+ }
+
+ if (failed && !retried) {
+ failed = 0;
+ retried = true;
+ goto again;
+ } else if (failed && retried) {
+ ret = -ENOSPC;
+ lock_chunks(root);
+
+ device->total_bytes = old_size;
+ if (device->writeable)
+ device->fs_devices->total_rw_bytes += diff;
+ unlock_chunks(root);
+ goto done;
}
/* Shrinking succeeded, else we would be at "done". */
em->block_len = em->len;
em_tree = &extent_root->fs_info->mapping_tree.map_tree;
- spin_lock(&em_tree->lock);
+ write_lock(&em_tree->lock);
ret = add_extent_mapping(em_tree, em);
- spin_unlock(&em_tree->lock);
+ write_unlock(&em_tree->lock);
BUG_ON(ret);
free_extent_map(em);
int readonly = 0;
int i;
- spin_lock(&map_tree->map_tree.lock);
+ read_lock(&map_tree->map_tree.lock);
em = lookup_extent_mapping(&map_tree->map_tree, chunk_offset, 1);
- spin_unlock(&map_tree->map_tree.lock);
+ read_unlock(&map_tree->map_tree.lock);
if (!em)
return 1;
struct extent_map *em;
while (1) {
- spin_lock(&tree->map_tree.lock);
+ write_lock(&tree->map_tree.lock);
em = lookup_extent_mapping(&tree->map_tree, 0, (u64)-1);
if (em)
remove_extent_mapping(&tree->map_tree, em);
- spin_unlock(&tree->map_tree.lock);
+ write_unlock(&tree->map_tree.lock);
if (!em)
break;
kfree(em->bdev);
struct extent_map_tree *em_tree = &map_tree->map_tree;
int ret;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, logical, len);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
BUG_ON(!em);
BUG_ON(em->start > logical || em->start + em->len < logical);
atomic_set(&multi->error, 0);
}
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, logical, *length);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
if (!em && unplug_page)
return 0;
u64 stripe_nr;
int i, j, nr = 0;
- spin_lock(&em_tree->lock);
+ read_lock(&em_tree->lock);
em = lookup_extent_mapping(em_tree, chunk_start, 1);
- spin_unlock(&em_tree->lock);
+ read_unlock(&em_tree->lock);
BUG_ON(!em || em->start != chunk_start);
map = (struct map_lookup *)em->bdev;
logical = key->offset;
length = btrfs_chunk_length(leaf, chunk);
- spin_lock(&map_tree->map_tree.lock);
+ read_lock(&map_tree->map_tree.lock);
em = lookup_extent_mapping(&map_tree->map_tree, logical, 1);
- spin_unlock(&map_tree->map_tree.lock);
+ read_unlock(&map_tree->map_tree.lock);
/* already mapped? */
if (em && em->start <= logical && em->start + em->len > logical) {
map->stripes[i].dev->in_fs_metadata = 1;
}
- spin_lock(&map_tree->map_tree.lock);
+ write_lock(&map_tree->map_tree.lock);
ret = add_extent_mapping(&map_tree->map_tree, em);
- spin_unlock(&map_tree->map_tree.lock);
+ write_unlock(&map_tree->map_tree.lock);
BUG_ON(ret);
free_extent_map(em);
void btrfs_unlock_volumes(void);
void btrfs_lock_volumes(void);
int btrfs_chunk_readonly(struct btrfs_root *root, u64 chunk_offset);
+int find_free_dev_extent(struct btrfs_trans_handle *trans,
+ struct btrfs_device *device, u64 num_bytes,
+ u64 *start, u64 *max_avail);
#endif
* attributes are handled directly.
*/
struct xattr_handler *btrfs_xattr_handlers[] = {
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_FS_POSIX_ACL
&btrfs_xattr_acl_access_handler,
&btrfs_xattr_acl_default_handler,
#endif
EXPORT_SYMBOL(invalidate_bdev);
/*
- * Kick pdflush then try to free up some ZONE_NORMAL memory.
+ * Kick the writeback threads then try to free up some ZONE_NORMAL memory.
*/
static void free_more_memory(void)
{
/*
* If it's a fully non-blocking write attempt and we cannot
* lock the buffer then redirty the page. Note that this can
- * potentially cause a busy-wait loop from pdflush and kswapd
- * activity, but those code paths have their own higher-level
- * throttling.
+ * potentially cause a busy-wait loop from writeback threads
+ * and kswapd activity, but those code paths have their own
+ * higher-level throttling.
*/
if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
lock_buffer(bh);
struct address_space *mapping = inode->i_mapping;
struct page *page;
void *fsdata;
- unsigned long limit;
int err;
- err = -EFBIG;
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && size > (loff_t)limit) {
- send_sig(SIGXFSZ, current, 0);
- goto out;
- }
- if (size > inode->i_sb->s_maxbytes)
+ err = inode_newsize_ok(inode, size);
+ if (err)
goto out;
err = pagecache_write_begin(NULL, mapping, size, 0,
* still running obsolete flush daemons, so we terminate them here.
*
* Use of bdflush() is deprecated and will be removed in a future kernel.
- * The `pdflush' kernel threads fully replace bdflush daemons and this call.
+ * The `flush-X' kernel threads fully replace bdflush daemons and this call.
*/
SYSCALL_DEFINE2(bdflush, int, func, long, data)
{
{
struct char_device_struct *cd;
struct cdev *cdev;
- char *s;
int err = -ENOMEM;
cd = __register_chrdev_region(major, baseminor, count, name);
cdev->owner = fops->owner;
cdev->ops = fops;
kobject_set_name(&cdev->kobj, "%s", name);
- for (s = strchr(kobject_name(&cdev->kobj),'/'); s; s = strchr(s, '/'))
- *s = '!';
err = cdev_add(cdev, MKDEV(cd->major, baseminor), count);
if (err)
tristate "CIFS support (advanced network filesystem, SMBFS successor)"
depends on INET
select NLS
+ select SLOW_WORK
help
This is the client VFS module for the Common Internet File System
(CIFS) protocol which is the successor to the Server Message Block
unsigned int extended_security = CIFSSEC_DEF;
/* unsigned int ntlmv2_support = 0; */
unsigned int sign_CIFS_PDUs = 1;
-extern struct task_struct *oplockThread; /* remove sparse warning */
-struct task_struct *oplockThread = NULL;
-/* extern struct task_struct * dnotifyThread; remove sparse warning */
static const struct super_operations cifs_super_ops;
unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
module_param(CIFSMaxBufSize, int, 0);
cifs_sb->mountdata = NULL;
}
#endif
- if (cifs_sb->local_nls)
- unload_nls(cifs_sb->local_nls);
+ unload_nls(cifs_sb->local_nls);
kfree(cifs_sb);
}
return rc;
kmem_cache_destroy(cifs_oplock_cachep);
}
-static int cifs_oplock_thread(void *dummyarg)
-{
- struct oplock_q_entry *oplock_item;
- struct cifsTconInfo *pTcon;
- struct inode *inode;
- __u16 netfid;
- int rc, waitrc = 0;
-
- set_freezable();
- do {
- if (try_to_freeze())
- continue;
-
- spin_lock(&cifs_oplock_lock);
- if (list_empty(&cifs_oplock_list)) {
- spin_unlock(&cifs_oplock_lock);
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(39*HZ);
- } else {
- oplock_item = list_entry(cifs_oplock_list.next,
- struct oplock_q_entry, qhead);
- cFYI(1, ("found oplock item to write out"));
- pTcon = oplock_item->tcon;
- inode = oplock_item->pinode;
- netfid = oplock_item->netfid;
- spin_unlock(&cifs_oplock_lock);
- DeleteOplockQEntry(oplock_item);
- /* can not grab inode sem here since it would
- deadlock when oplock received on delete
- since vfs_unlink holds the i_mutex across
- the call */
- /* mutex_lock(&inode->i_mutex);*/
- if (S_ISREG(inode->i_mode)) {
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- if (CIFS_I(inode)->clientCanCacheAll == 0)
- break_lease(inode, FMODE_READ);
- else if (CIFS_I(inode)->clientCanCacheRead == 0)
- break_lease(inode, FMODE_WRITE);
-#endif
- rc = filemap_fdatawrite(inode->i_mapping);
- if (CIFS_I(inode)->clientCanCacheRead == 0) {
- waitrc = filemap_fdatawait(
- inode->i_mapping);
- invalidate_remote_inode(inode);
- }
- if (rc == 0)
- rc = waitrc;
- } else
- rc = 0;
- /* mutex_unlock(&inode->i_mutex);*/
- if (rc)
- CIFS_I(inode)->write_behind_rc = rc;
- cFYI(1, ("Oplock flush inode %p rc %d",
- inode, rc));
-
- /* releasing stale oplock after recent reconnect
- of smb session using a now incorrect file
- handle is not a data integrity issue but do
- not bother sending an oplock release if session
- to server still is disconnected since oplock
- already released by the server in that case */
- if (!pTcon->need_reconnect) {
- rc = CIFSSMBLock(0, pTcon, netfid,
- 0 /* len */ , 0 /* offset */, 0,
- 0, LOCKING_ANDX_OPLOCK_RELEASE,
- false /* wait flag */);
- cFYI(1, ("Oplock release rc = %d", rc));
- }
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1); /* yield in case q were corrupt */
- }
- } while (!kthread_should_stop());
-
- return 0;
-}
-
static int __init
init_cifs(void)
{
int rc = 0;
cifs_proc_init();
INIT_LIST_HEAD(&cifs_tcp_ses_list);
- INIT_LIST_HEAD(&cifs_oplock_list);
#ifdef CONFIG_CIFS_EXPERIMENTAL
INIT_LIST_HEAD(&GlobalDnotifyReqList);
INIT_LIST_HEAD(&GlobalDnotifyRsp_Q);
rwlock_init(&GlobalSMBSeslock);
rwlock_init(&cifs_tcp_ses_lock);
spin_lock_init(&GlobalMid_Lock);
- spin_lock_init(&cifs_oplock_lock);
if (cifs_max_pending < 2) {
cifs_max_pending = 2;
if (rc)
goto out_unregister_key_type;
#endif
- oplockThread = kthread_run(cifs_oplock_thread, NULL, "cifsoplockd");
- if (IS_ERR(oplockThread)) {
- rc = PTR_ERR(oplockThread);
- cERROR(1, ("error %d create oplock thread", rc));
- goto out_unregister_dfs_key_type;
- }
+ rc = slow_work_register_user();
+ if (rc)
+ goto out_unregister_resolver_key;
return 0;
- out_unregister_dfs_key_type:
+ out_unregister_resolver_key:
#ifdef CONFIG_CIFS_DFS_UPCALL
unregister_key_type(&key_type_dns_resolver);
out_unregister_key_type:
cifs_destroy_inodecache();
cifs_destroy_mids();
cifs_destroy_request_bufs();
- kthread_stop(oplockThread);
}
MODULE_AUTHOR("Steve French <sfrench@us.ibm.com>");
*/
#include <linux/in.h>
#include <linux/in6.h>
+#include <linux/slow-work.h>
#include "cifs_fs_sb.h"
#include "cifsacl.h"
/*
/* lock scope id (0 if none) */
struct file *pfile; /* needed for writepage */
struct inode *pInode; /* needed for oplock break */
+ struct vfsmount *mnt;
struct mutex lock_mutex;
struct list_head llist; /* list of byte range locks we have. */
bool closePend:1; /* file is marked to close */
bool invalidHandle:1; /* file closed via session abend */
- bool messageMode:1; /* for pipes: message vs byte mode */
+ bool oplock_break_cancelled:1;
atomic_t count; /* reference count */
struct mutex fh_mutex; /* prevents reopen race after dead ses*/
struct cifs_search_info srch_inf;
+ struct slow_work oplock_break; /* slow_work job for oplock breaks */
};
/* Take a reference on the file private data */
/* Release a reference on the file private data */
static inline void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
{
- if (atomic_dec_and_test(&cifs_file->count))
+ if (atomic_dec_and_test(&cifs_file->count)) {
+ iput(cifs_file->pInode);
kfree(cifs_file);
+ }
}
/*
unsigned long time; /* jiffies of last update/check of inode */
bool clientCanCacheRead:1; /* read oplock */
bool clientCanCacheAll:1; /* read and writebehind oplock */
- bool oplockPending:1;
bool delete_pending:1; /* DELETE_ON_CLOSE is set */
u64 server_eof; /* current file size on server */
u64 uniqueid; /* server inode number */
#define CIFSSEC_MUST_LANMAN 0x10010
#define CIFSSEC_MUST_PLNTXT 0x20020
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0xAF0AF /* allows weak security but also krb5 */
+#define CIFSSEC_MASK 0xBF0BF /* allows weak security but also krb5 */
#else
-#define CIFSSEC_MASK 0xA70A7 /* current flags supported if weak */
+#define CIFSSEC_MASK 0xB70B7 /* current flags supported if weak */
#endif /* UPCALL */
#else /* do not allow weak pw hash */
#ifdef CONFIG_CIFS_UPCALL
*/
GLOBAL_EXTERN rwlock_t GlobalSMBSeslock;
-/* Global list of oplocks */
-GLOBAL_EXTERN struct list_head cifs_oplock_list;
-
-/* Protects the cifs_oplock_list */
-GLOBAL_EXTERN spinlock_t cifs_oplock_lock;
-
/* Outstanding dir notify requests */
GLOBAL_EXTERN struct list_head GlobalDnotifyReqList;
/* DirNotify response queue */
GLOBAL_EXTERN unsigned int cifs_min_small; /* min size of small buf pool */
GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
+extern const struct slow_work_ops cifs_oplock_break_ops;
const int stage,
const struct nls_table *nls_cp);
extern __u16 GetNextMid(struct TCP_Server_Info *server);
-extern struct oplock_q_entry *AllocOplockQEntry(struct inode *, u16,
- struct cifsTconInfo *);
-extern void DeleteOplockQEntry(struct oplock_q_entry *);
-extern void DeleteTconOplockQEntries(struct cifsTconInfo *);
extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601);
extern u64 cifs_UnixTimeToNT(struct timespec);
extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
int offset);
+extern struct cifsFileInfo *cifs_new_fileinfo(struct inode *newinode,
+ __u16 fileHandle, struct file *file,
+ struct vfsmount *mnt, unsigned int oflags);
extern int cifs_posix_open(char *full_path, struct inode **pinode,
- struct super_block *sb, int mode, int oflags,
- int *poplock, __u16 *pnetfid, int xid);
+ struct vfsmount *mnt, int mode, int oflags,
+ __u32 *poplock, __u16 *pnetfid, int xid);
extern void cifs_unix_basic_to_fattr(struct cifs_fattr *fattr,
FILE_UNIX_BASIC_INFO *info,
struct cifs_sb_info *cifs_sb);
list_for_each_safe(tmp, tmp1, &pTcon->openFileList) {
open_file = list_entry(tmp, struct cifsFileInfo, tlist);
open_file->invalidHandle = true;
+ open_file->oplock_break_cancelled = true;
}
write_unlock(&GlobalSMBSeslock);
/* BB Add call to invalidate_inodes(sb) for all superblocks mounted
out_err:
if (tcp_ses) {
- kfree(tcp_ses->hostname);
+ if (!IS_ERR(tcp_ses->hostname))
+ kfree(tcp_ses->hostname);
if (tcp_ses->ssocket)
sock_release(tcp_ses->ssocket);
kfree(tcp_ses);
CIFSSMBTDis(xid, tcon);
_FreeXid(xid);
- DeleteTconOplockQEntries(tcon);
tconInfoFree(tcon);
cifs_put_smb_ses(ses);
}
#include <linux/stat.h>
#include <linux/slab.h>
#include <linux/namei.h>
+#include <linux/mount.h>
#include "cifsfs.h"
#include "cifspdu.h"
#include "cifsglob.h"
return full_path;
}
-static void
-cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
- struct cifsTconInfo *tcon, bool write_only)
+struct cifsFileInfo *
+cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
+ struct file *file, struct vfsmount *mnt, unsigned int oflags)
{
int oplock = 0;
struct cifsFileInfo *pCifsFile;
struct cifsInodeInfo *pCifsInode;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(mnt->mnt_sb);
pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
if (pCifsFile == NULL)
- return;
+ return pCifsFile;
if (oplockEnabled)
oplock = REQ_OPLOCK;
pCifsFile->netfid = fileHandle;
pCifsFile->pid = current->tgid;
- pCifsFile->pInode = newinode;
+ pCifsFile->pInode = igrab(newinode);
+ pCifsFile->mnt = mnt;
+ pCifsFile->pfile = file;
pCifsFile->invalidHandle = false;
pCifsFile->closePend = false;
mutex_init(&pCifsFile->fh_mutex);
mutex_init(&pCifsFile->lock_mutex);
INIT_LIST_HEAD(&pCifsFile->llist);
atomic_set(&pCifsFile->count, 1);
+ slow_work_init(&pCifsFile->oplock_break, &cifs_oplock_break_ops);
- /* set the following in open now
- pCifsFile->pfile = file; */
write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
+ list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
pCifsInode = CIFS_I(newinode);
if (pCifsInode) {
/* if readable file instance put first in list*/
- if (write_only)
+ if (oflags & FMODE_READ)
+ list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+ else
list_add_tail(&pCifsFile->flist,
&pCifsInode->openFileList);
- else
- list_add(&pCifsFile->flist, &pCifsInode->openFileList);
if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
pCifsInode->clientCanCacheAll = true;
pCifsInode->clientCanCacheRead = true;
}
write_unlock(&GlobalSMBSeslock);
+
+ return pCifsFile;
}
int cifs_posix_open(char *full_path, struct inode **pinode,
- struct super_block *sb, int mode, int oflags,
- int *poplock, __u16 *pnetfid, int xid)
+ struct vfsmount *mnt, int mode, int oflags,
+ __u32 *poplock, __u16 *pnetfid, int xid)
{
int rc;
- __u32 oplock;
- bool write_only = false;
FILE_UNIX_BASIC_INFO *presp_data;
__u32 posix_flags = 0;
- struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(mnt->mnt_sb);
struct cifs_fattr fattr;
cFYI(1, ("posix open %s", full_path));
if (oflags & O_DIRECT)
posix_flags |= SMB_O_DIRECT;
- if (!(oflags & FMODE_READ))
- write_only = true;
-
mode &= ~current_umask();
rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
- pnetfid, presp_data, &oplock, full_path,
+ pnetfid, presp_data, poplock, full_path,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc)
/* get new inode and set it up */
if (*pinode == NULL) {
- *pinode = cifs_iget(sb, &fattr);
+ *pinode = cifs_iget(mnt->mnt_sb, &fattr);
if (!*pinode) {
rc = -ENOMEM;
goto posix_open_ret;
cifs_fattr_to_inode(*pinode, &fattr);
}
- cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+ cifs_new_fileinfo(*pinode, *pnetfid, NULL, mnt, oflags);
posix_open_ret:
kfree(presp_data);
int rc = -ENOENT;
int xid;
int create_options = CREATE_NOT_DIR;
- int oplock = 0;
+ __u32 oplock = 0;
int oflags;
bool posix_create = false;
/*
FILE_ALL_INFO *buf = NULL;
struct inode *newinode = NULL;
int disposition = FILE_OVERWRITE_IF;
- bool write_only = false;
xid = GetXid();
if (tcon->unix_ext && (tcon->ses->capabilities & CAP_UNIX) &&
(CIFS_UNIX_POSIX_PATH_OPS_CAP &
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
- rc = cifs_posix_open(full_path, &newinode, inode->i_sb,
+ rc = cifs_posix_open(full_path, &newinode, nd->path.mnt,
mode, oflags, &oplock, &fileHandle, xid);
/* EIO could indicate that (posix open) operation is not
supported, despite what server claimed in capability
desiredAccess = 0;
if (oflags & FMODE_READ)
desiredAccess |= GENERIC_READ; /* is this too little? */
- if (oflags & FMODE_WRITE) {
+ if (oflags & FMODE_WRITE)
desiredAccess |= GENERIC_WRITE;
- if (!(oflags & FMODE_READ))
- write_only = true;
- }
if ((oflags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))
disposition = FILE_CREATE;
/* mknod case - do not leave file open */
CIFSSMBClose(xid, tcon, fileHandle);
} else if (!(posix_create) && (newinode)) {
- cifs_fill_fileinfo(newinode, fileHandle,
- cifs_sb->tcon, write_only);
+ cifs_new_fileinfo(newinode, fileHandle, NULL,
+ nd->path.mnt, oflags);
}
cifs_create_out:
kfree(buf);
{
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
- int oplock = 0;
+ __u32 oplock = 0;
__u16 fileHandle = 0;
bool posix_open = false;
struct cifs_sb_info *cifs_sb;
if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
(nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
(nd->intent.open.flags & O_CREAT)) {
- rc = cifs_posix_open(full_path, &newInode,
- parent_dir_inode->i_sb,
+ rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
nd->intent.open.create_mode,
nd->intent.open.flags, &oplock,
&fileHandle, xid);
#include <linux/writeback.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/delay.h>
+#include <linux/mount.h>
#include <asm/div64.h>
#include "cifsfs.h"
#include "cifspdu.h"
#include "cifs_debug.h"
#include "cifs_fs_sb.h"
-static inline struct cifsFileInfo *cifs_init_private(
- struct cifsFileInfo *private_data, struct inode *inode,
- struct file *file, __u16 netfid)
-{
- memset(private_data, 0, sizeof(struct cifsFileInfo));
- private_data->netfid = netfid;
- private_data->pid = current->tgid;
- mutex_init(&private_data->fh_mutex);
- mutex_init(&private_data->lock_mutex);
- INIT_LIST_HEAD(&private_data->llist);
- private_data->pfile = file; /* needed for writepage */
- private_data->pInode = inode;
- private_data->invalidHandle = false;
- private_data->closePend = false;
- /* Initialize reference count to one. The private data is
- freed on the release of the last reference */
- atomic_set(&private_data->count, 1);
-
- return private_data;
-}
-
static inline int cifs_convert_flags(unsigned int flags)
{
if ((flags & O_ACCMODE) == O_RDONLY)
}
/* all arguments to this function must be checked for validity in caller */
-static inline int cifs_posix_open_inode_helper(struct inode *inode,
- struct file *file, struct cifsInodeInfo *pCifsInode,
- struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
+static inline int
+cifs_posix_open_inode_helper(struct inode *inode, struct file *file,
+ struct cifsInodeInfo *pCifsInode,
+ struct cifsFileInfo *pCifsFile, __u32 oplock,
+ u16 netfid)
{
write_lock(&GlobalSMBSeslock);
struct timespec temp;
int rc;
- /* want handles we can use to read with first
- in the list so we do not have to walk the
- list to search for one in write_begin */
- if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
- write_unlock(&GlobalSMBSeslock);
if (pCifsInode->clientCanCacheRead) {
/* we have the inode open somewhere else
no need to discard cache data */
int cifs_open(struct inode *inode, struct file *file)
{
int rc = -EACCES;
- int xid, oplock;
+ int xid;
+ __u32 oplock;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
struct cifsFileInfo *pCifsFile;
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
int oflags = (int) cifs_posix_convert_flags(file->f_flags);
/* can not refresh inode info since size could be stale */
- rc = cifs_posix_open(full_path, &inode, inode->i_sb,
+ rc = cifs_posix_open(full_path, &inode, file->f_path.mnt,
cifs_sb->mnt_file_mode /* ignored */,
oflags, &oplock, &netfid, xid);
if (rc == 0) {
cFYI(1, ("cifs_open returned 0x%x", rc));
goto out;
}
- file->private_data =
- kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+ pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
+ file->f_flags);
+ file->private_data = pCifsFile;
if (file->private_data == NULL) {
rc = -ENOMEM;
goto out;
}
- pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
- write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
- pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
- if (pCifsInode) {
- rc = cifs_open_inode_helper(inode, file, pCifsInode,
- pCifsFile, tcon,
- &oplock, buf, full_path, xid);
- } else {
- write_unlock(&GlobalSMBSeslock);
- }
+ rc = cifs_open_inode_helper(inode, file, pCifsInode, pCifsFile, tcon,
+ &oplock, buf, full_path, xid);
if (oplock & CIFS_CREATE_ACTION) {
/* time to set mode which we can not set earlier due to
static int cifs_reopen_file(struct file *file, bool can_flush)
{
int rc = -EACCES;
- int xid, oplock;
+ int xid;
+ __u32 oplock;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *tcon;
struct cifsFileInfo *pCifsFile;
le64_to_cpu(tcon->fsUnixInfo.Capability))) {
int oflags = (int) cifs_posix_convert_flags(file->f_flags);
/* can not refresh inode info since size could be stale */
- rc = cifs_posix_open(full_path, NULL, inode->i_sb,
+ rc = cifs_posix_open(full_path, NULL, file->f_path.mnt,
cifs_sb->mnt_file_mode /* ignored */,
oflags, &oplock, &netfid, xid);
if (rc == 0) {
return rc;
}
+static void
+cifs_oplock_break(struct slow_work *work)
+{
+ struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+ oplock_break);
+ struct inode *inode = cfile->pInode;
+ struct cifsInodeInfo *cinode = CIFS_I(inode);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(cfile->mnt->mnt_sb);
+ int rc, waitrc = 0;
+
+ if (inode && S_ISREG(inode->i_mode)) {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ if (cinode->clientCanCacheAll == 0)
+ break_lease(inode, FMODE_READ);
+ else if (cinode->clientCanCacheRead == 0)
+ break_lease(inode, FMODE_WRITE);
+#endif
+ rc = filemap_fdatawrite(inode->i_mapping);
+ if (cinode->clientCanCacheRead == 0) {
+ waitrc = filemap_fdatawait(inode->i_mapping);
+ invalidate_remote_inode(inode);
+ }
+ if (!rc)
+ rc = waitrc;
+ if (rc)
+ cinode->write_behind_rc = rc;
+ cFYI(1, ("Oplock flush inode %p rc %d", inode, rc));
+ }
+
+ /*
+ * releasing stale oplock after recent reconnect of smb session using
+ * a now incorrect file handle is not a data integrity issue but do
+ * not bother sending an oplock release if session to server still is
+ * disconnected since oplock already released by the server
+ */
+ if (!cfile->closePend && !cfile->oplock_break_cancelled) {
+ rc = CIFSSMBLock(0, cifs_sb->tcon, cfile->netfid, 0, 0, 0, 0,
+ LOCKING_ANDX_OPLOCK_RELEASE, false);
+ cFYI(1, ("Oplock release rc = %d", rc));
+ }
+}
+
+static int
+cifs_oplock_break_get(struct slow_work *work)
+{
+ struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+ oplock_break);
+ mntget(cfile->mnt);
+ cifsFileInfo_get(cfile);
+ return 0;
+}
+
+static void
+cifs_oplock_break_put(struct slow_work *work)
+{
+ struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+ oplock_break);
+ mntput(cfile->mnt);
+ cifsFileInfo_put(cfile);
+}
+
+const struct slow_work_ops cifs_oplock_break_ops = {
+ .get_ref = cifs_oplock_break_get,
+ .put_ref = cifs_oplock_break_put,
+ .execute = cifs_oplock_break,
+};
+
const struct address_space_operations cifs_addr_ops = {
.readpage = cifs_readpage,
.readpages = cifs_readpages,
static int cifs_vmtruncate(struct inode *inode, loff_t offset)
{
- struct address_space *mapping = inode->i_mapping;
- unsigned long limit;
+ loff_t oldsize;
+ int err;
spin_lock(&inode->i_lock);
- if (inode->i_size < offset)
- goto do_expand;
- /*
- * truncation of in-use swapfiles is disallowed - it would cause
- * subsequent swapout to scribble on the now-freed blocks.
- */
- if (IS_SWAPFILE(inode)) {
- spin_unlock(&inode->i_lock);
- goto out_busy;
- }
- i_size_write(inode, offset);
- spin_unlock(&inode->i_lock);
- /*
- * unmap_mapping_range is called twice, first simply for efficiency
- * so that truncate_inode_pages does fewer single-page unmaps. However
- * after this first call, and before truncate_inode_pages finishes,
- * it is possible for private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second unmap_mapping_range
- * call must be made for correctness.
- */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- goto out_truncate;
-
-do_expand:
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit) {
+ err = inode_newsize_ok(inode, offset);
+ if (err) {
spin_unlock(&inode->i_lock);
- goto out_sig;
- }
- if (offset > inode->i_sb->s_maxbytes) {
- spin_unlock(&inode->i_lock);
- goto out_big;
+ goto out;
}
+
+ oldsize = inode->i_size;
i_size_write(inode, offset);
spin_unlock(&inode->i_lock);
-out_truncate:
+ truncate_pagecache(inode, oldsize, offset);
if (inode->i_op->truncate)
inode->i_op->truncate(inode);
- return 0;
-out_sig:
- send_sig(SIGXFSZ, current, 0);
-out_big:
- return -EFBIG;
-out_busy:
- return -ETXTBSY;
+out:
+ return err;
}
static int
extern mempool_t *cifs_sm_req_poolp;
extern mempool_t *cifs_req_poolp;
-extern struct task_struct *oplockThread;
/* The xid serves as a useful identifier for each incoming vfs request,
in a similar way to the mid which is useful to track each sent smb,
struct cifsTconInfo *tcon;
struct cifsInodeInfo *pCifsInode;
struct cifsFileInfo *netfile;
+ int rc;
cFYI(1, ("Checking for oplock break or dnotify response"));
if ((pSMB->hdr.Command == SMB_COM_NT_TRANSACT) &&
continue;
cifs_stats_inc(&tcon->num_oplock_brks);
- write_lock(&GlobalSMBSeslock);
+ read_lock(&GlobalSMBSeslock);
list_for_each(tmp2, &tcon->openFileList) {
netfile = list_entry(tmp2, struct cifsFileInfo,
tlist);
if (pSMB->Fid != netfile->netfid)
continue;
- write_unlock(&GlobalSMBSeslock);
- read_unlock(&cifs_tcp_ses_lock);
+ /*
+ * don't do anything if file is about to be
+ * closed anyway.
+ */
+ if (netfile->closePend) {
+ read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
+ return true;
+ }
+
cFYI(1, ("file id match, oplock break"));
pCifsInode = CIFS_I(netfile->pInode);
pCifsInode->clientCanCacheAll = false;
if (pSMB->OplockLevel == 0)
pCifsInode->clientCanCacheRead = false;
- pCifsInode->oplockPending = true;
- AllocOplockQEntry(netfile->pInode,
- netfile->netfid, tcon);
- cFYI(1, ("about to wake up oplock thread"));
- if (oplockThread)
- wake_up_process(oplockThread);
-
+ rc = slow_work_enqueue(&netfile->oplock_break);
+ if (rc) {
+ cERROR(1, ("failed to enqueue oplock "
+ "break: %d\n", rc));
+ } else {
+ netfile->oplock_break_cancelled = false;
+ }
+ read_unlock(&GlobalSMBSeslock);
+ read_unlock(&cifs_tcp_ses_lock);
return true;
}
- write_unlock(&GlobalSMBSeslock);
+ read_unlock(&GlobalSMBSeslock);
read_unlock(&cifs_tcp_ses_lock);
cFYI(1, ("No matching file for oplock break"));
return true;
}
}
-void
+static void
cifs_dir_info_to_fattr(struct cifs_fattr *fattr, FILE_DIRECTORY_INFO *info,
struct cifs_sb_info *cifs_sb)
{
cifs_fill_common_info(fattr, cifs_sb);
}
-void
+static void
cifs_std_info_to_fattr(struct cifs_fattr *fattr, FIND_FILE_STANDARD_INFO *info,
struct cifs_sb_info *cifs_sb)
{
mempool_free(midEntry, cifs_mid_poolp);
}
-struct oplock_q_entry *
-AllocOplockQEntry(struct inode *pinode, __u16 fid, struct cifsTconInfo *tcon)
-{
- struct oplock_q_entry *temp;
- if ((pinode == NULL) || (tcon == NULL)) {
- cERROR(1, ("Null parms passed to AllocOplockQEntry"));
- return NULL;
- }
- temp = (struct oplock_q_entry *) kmem_cache_alloc(cifs_oplock_cachep,
- GFP_KERNEL);
- if (temp == NULL)
- return temp;
- else {
- temp->pinode = pinode;
- temp->tcon = tcon;
- temp->netfid = fid;
- spin_lock(&cifs_oplock_lock);
- list_add_tail(&temp->qhead, &cifs_oplock_list);
- spin_unlock(&cifs_oplock_lock);
- }
- return temp;
-}
-
-void DeleteOplockQEntry(struct oplock_q_entry *oplockEntry)
-{
- spin_lock(&cifs_oplock_lock);
- /* should we check if list empty first? */
- list_del(&oplockEntry->qhead);
- spin_unlock(&cifs_oplock_lock);
- kmem_cache_free(cifs_oplock_cachep, oplockEntry);
-}
-
-
-void DeleteTconOplockQEntries(struct cifsTconInfo *tcon)
-{
- struct oplock_q_entry *temp;
-
- if (tcon == NULL)
- return;
-
- spin_lock(&cifs_oplock_lock);
- list_for_each_entry(temp, &cifs_oplock_list, qhead) {
- if ((temp->tcon) && (temp->tcon == tcon)) {
- list_del(&temp->qhead);
- kmem_cache_free(cifs_oplock_cachep, temp);
- }
- }
- spin_unlock(&cifs_oplock_lock);
-}
-
static int
smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec)
{
#define _CODA_INT_
struct dentry;
+struct file;
extern struct file_system_type coda_fs_type;
extern unsigned long coda_timeout;
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/time.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/fcntl.h>
char __user * type, unsigned long flags,
void __user * data)
{
- unsigned long type_page;
+ char *kernel_type;
unsigned long data_page;
- unsigned long dev_page;
+ char *kernel_dev;
char *dir_page;
int retval;
- retval = copy_mount_options (type, &type_page);
+ retval = copy_mount_string(type, &kernel_type);
if (retval < 0)
goto out;
if (IS_ERR(dir_page))
goto out1;
- retval = copy_mount_options (dev_name, &dev_page);
+ retval = copy_mount_string(dev_name, &kernel_dev);
if (retval < 0)
goto out2;
- retval = copy_mount_options (data, &data_page);
+ retval = copy_mount_options(data, &data_page);
if (retval < 0)
goto out3;
retval = -EINVAL;
- if (type_page && data_page) {
- if (!strcmp((char *)type_page, SMBFS_NAME)) {
+ if (kernel_type && data_page) {
+ if (!strcmp(kernel_type, SMBFS_NAME)) {
do_smb_super_data_conv((void *)data_page);
- } else if (!strcmp((char *)type_page, NCPFS_NAME)) {
+ } else if (!strcmp(kernel_type, NCPFS_NAME)) {
do_ncp_super_data_conv((void *)data_page);
- } else if (!strcmp((char *)type_page, NFS4_NAME)) {
+ } else if (!strcmp(kernel_type, NFS4_NAME)) {
if (do_nfs4_super_data_conv((void *) data_page))
goto out4;
}
}
- retval = do_mount((char*)dev_page, dir_page, (char*)type_page,
+ retval = do_mount(kernel_dev, dir_page, kernel_type,
flags, (void*)data_page);
out4:
free_page(data_page);
out3:
- free_page(dev_page);
+ kfree(kernel_dev);
out2:
putname(dir_page);
out1:
- free_page(type_page);
+ kfree(kernel_type);
out:
return retval;
}
if (retval < 0)
goto out;
+ current->stack_start = current->mm->start_stack;
+
/* execve succeeded */
current->fs->in_exec = 0;
current->in_execve = 0;
{
struct connection *con;
+ /* with sctp there's no connecting without sending */
+ if (dlm_config.ci_protocol != 0)
+ return 0;
+
if (nodeid == dlm_our_nodeid())
return 0;
int prim_len, ret;
int addr_len;
struct connection *new_con;
- struct file *file;
sctp_peeloff_arg_t parg;
int parglen = sizeof(parg);
+ int err;
/*
* We get this before any data for an association.
ret = kernel_getsockopt(con->sock, IPPROTO_SCTP,
SCTP_SOCKOPT_PEELOFF,
(void *)&parg, &parglen);
- if (ret) {
+ if (ret < 0) {
log_print("Can't peel off a socket for "
- "connection %d to node %d: err=%d\n",
+ "connection %d to node %d: err=%d",
parg.associd, nodeid, ret);
+ return;
+ }
+ new_con->sock = sockfd_lookup(parg.sd, &err);
+ if (!new_con->sock) {
+ log_print("sockfd_lookup error %d", err);
+ return;
}
- file = fget(parg.sd);
- new_con->sock = SOCKET_I(file->f_dentry->d_inode);
add_sock(new_con->sock, new_con);
- fput(file);
- put_unused_fd(parg.sd);
+ sockfd_put(new_con->sock);
- log_print("got new/restarted association %d nodeid %d",
- (int)sn->sn_assoc_change.sac_assoc_id, nodeid);
+ log_print("connecting to %d sctp association %d",
+ nodeid, (int)sn->sn_assoc_change.sac_assoc_id);
/* Send any pending writes */
clear_bit(CF_CONNECT_PENDING, &new_con->flags);
if (con->retries++ > MAX_CONNECT_RETRIES)
return;
- log_print("Initiating association with node %d", con->nodeid);
-
if (nodeid_to_addr(con->nodeid, (struct sockaddr *)&rem_addr)) {
log_print("no address for nodeid %d", con->nodeid);
return;
outmessage.msg_flags = MSG_EOR;
spin_lock(&con->writequeue_lock);
- e = list_entry(con->writequeue.next, struct writequeue_entry,
- list);
- BUG_ON((struct list_head *) e == &con->writequeue);
+ if (list_empty(&con->writequeue)) {
+ spin_unlock(&con->writequeue_lock);
+ log_print("writequeue empty for nodeid %d", con->nodeid);
+ return;
+ }
+ e = list_first_entry(&con->writequeue, struct writequeue_entry, list);
len = e->len;
offset = e->offset;
spin_unlock(&con->writequeue_lock);
}
int drop_caches_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
- proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ proc_dointvec_minmax(table, write, buffer, length, ppos);
if (write) {
if (sysctl_drop_caches & 1)
drop_pagecache();
config ECRYPT_FS
tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+ depends on EXPERIMENTAL && KEYS && CRYPTO
+ select CRYPTO_ECB
+ select CRYPTO_CBC
+ select CRYPTO_MD5
help
Encrypted filesystem that operates on the VFS layer. See
<file:Documentation/filesystems/ecryptfs.txt> to learn more about
crypto_free_blkcipher(crypt_stat->tfm);
if (crypt_stat->hash_tfm)
crypto_free_hash(crypt_stat->hash_tfm);
- mutex_lock(&crypt_stat->keysig_list_mutex);
list_for_each_entry_safe(key_sig, key_sig_tmp,
&crypt_stat->keysig_list, crypt_stat_list) {
list_del(&key_sig->crypt_stat_list);
kmem_cache_free(ecryptfs_key_sig_cache, key_sig);
}
- mutex_unlock(&crypt_stat->keysig_list_mutex);
memset(crypt_stat, 0, sizeof(struct ecryptfs_crypt_stat));
}
+ extent_offset), crypt_stat);
rc = ecryptfs_write_lower(ecryptfs_inode, enc_extent_virt,
offset, crypt_stat->extent_size);
- if (rc) {
+ if (rc < 0) {
ecryptfs_printk(KERN_ERR, "Error attempting "
"to write lower page; rc = [%d]"
"\n", rc);
goto out;
}
}
+ rc = 0;
out:
if (enc_extent_page) {
kunmap(enc_extent_page);
rc = ecryptfs_read_lower(enc_extent_virt, offset,
crypt_stat->extent_size,
ecryptfs_inode);
- if (rc) {
+ if (rc < 0) {
ecryptfs_printk(KERN_ERR, "Error attempting "
"to read lower page; rc = [%d]"
"\n", rc);
kfree(full_alg_name);
if (IS_ERR(crypt_stat->tfm)) {
rc = PTR_ERR(crypt_stat->tfm);
+ crypt_stat->tfm = NULL;
ecryptfs_printk(KERN_ERR, "cryptfs: init_crypt_ctx(): "
"Error initializing cipher [%s]\n",
crypt_stat->cipher);
struct ecryptfs_global_auth_tok *global_auth_tok;
int rc = 0;
+ mutex_lock(&crypt_stat->keysig_list_mutex);
mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
+
list_for_each_entry(global_auth_tok,
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig);
if (rc) {
printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
- mutex_unlock(
- &mount_crypt_stat->global_auth_tok_list_mutex);
goto out;
}
}
- mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
+
out:
+ mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
+ mutex_unlock(&crypt_stat->keysig_list_mutex);
return rc;
}
crypt_stat->extent_size = ECRYPTFS_DEFAULT_EXTENT_SIZE;
rc = ecryptfs_read_lower(data, 0, crypt_stat->extent_size,
ecryptfs_inode);
- if (rc) {
+ if (rc < 0) {
printk(KERN_ERR "%s: Error reading header region; rc = [%d]\n",
__func__, rc);
goto out;
}
if (!contains_ecryptfs_marker(data + ECRYPTFS_FILE_SIZE_BYTES)) {
rc = -EINVAL;
- }
+ } else
+ rc = 0;
out:
return rc;
}
rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
0, virt_len);
- if (rc)
+ if (rc < 0)
printk(KERN_ERR "%s: Error attempting to write header "
- "information to lower file; rc = [%d]\n", __func__,
- rc);
+ "information to lower file; rc = [%d]\n", __func__, rc);
+ else
+ rc = 0;
return rc;
}
}
rc = ecryptfs_read_lower(page_virt, 0, crypt_stat->extent_size,
ecryptfs_inode);
- if (!rc)
+ if (rc >= 0)
rc = ecryptfs_read_headers_virt(page_virt, crypt_stat,
ecryptfs_dentry,
ECRYPTFS_VALIDATE_HEADER_SIZE);
} else {
printk(KERN_ERR "%s: No support for requested filename "
"encryption method in this release\n", __func__);
- rc = -ENOTSUPP;
+ rc = -EOPNOTSUPP;
goto out;
}
out:
if (IS_ERR(*key_tfm)) {
rc = PTR_ERR(*key_tfm);
printk(KERN_ERR "Unable to allocate crypto cipher with name "
- "[%s]; rc = [%d]\n", cipher_name, rc);
+ "[%s]; rc = [%d]\n", full_alg_name, rc);
goto out;
}
crypto_blkcipher_set_flags(*key_tfm, CRYPTO_TFM_REQ_WEAK_KEY);
rc = crypto_blkcipher_setkey(*key_tfm, dummy_key, *key_size);
if (rc) {
printk(KERN_ERR "Error attempting to set key of size [%zd] for "
- "cipher [%s]; rc = [%d]\n", *key_size, cipher_name, rc);
+ "cipher [%s]; rc = [%d]\n", *key_size, full_alg_name,
+ rc);
rc = -EINVAL;
goto out;
}
(*encoded_name)[(*encoded_name_size)] = '\0';
(*encoded_name_size)++;
} else {
- rc = -ENOTSUPP;
+ rc = -EOPNOTSUPP;
}
if (rc) {
printk(KERN_ERR "%s: Error attempting to encode "
struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
struct dentry *lower_dir_dentry;
+ dget(lower_dentry);
lower_dir_dentry = lock_parent(lower_dentry);
rc = vfs_unlink(lower_dir_inode, lower_dentry);
if (rc) {
d_drop(dentry);
out_unlock:
unlock_dir(lower_dir_dentry);
+ dput(lower_dentry);
return rc;
}
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
if (memcmp(walker->sig, sig, ECRYPTFS_SIG_SIZE_HEX) == 0) {
- (*global_auth_tok) = walker;
+ rc = key_validate(walker->global_auth_tok_key);
+ if (!rc)
+ (*global_auth_tok) = walker;
goto out;
}
}
}
/* TODO: Support other key modules than passphrase for
* filename encryption */
- BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+ if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+ rc = -EOPNOTSUPP;
+ printk(KERN_INFO "%s: Filename encryption only supports "
+ "password tokens\n", __func__);
+ goto out_free_unlock;
+ }
sg_init_one(
&s->hash_sg,
(u8 *)s->auth_tok->token.password.session_key_encryption_key,
}
/* TODO: Support other key modules than passphrase for
* filename encryption */
- BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+ if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+ rc = -EOPNOTSUPP;
+ printk(KERN_INFO "%s: Filename encryption only supports "
+ "password tokens\n", __func__);
+ goto out_free_unlock;
+ }
rc = crypto_blkcipher_setkey(
s->desc.tfm,
s->auth_tok->token.password.session_key_encryption_key,
rc = -EINVAL;
goto out_free;
}
- ecryptfs_cipher_code_to_string(crypt_stat->cipher,
- (u16)data[(*packet_size)]);
+ rc = ecryptfs_cipher_code_to_string(crypt_stat->cipher,
+ (u16)data[(*packet_size)]);
+ if (rc)
+ goto out_free;
/* A little extra work to differentiate among the AES key
* sizes; see RFC2440 */
switch(data[(*packet_size)++]) {
crypt_stat->key_size =
(*new_auth_tok)->session_key.encrypted_key_size;
}
- ecryptfs_init_crypt_ctx(crypt_stat);
+ rc = ecryptfs_init_crypt_ctx(crypt_stat);
+ if (rc)
+ goto out_free;
if (unlikely(data[(*packet_size)++] != 0x03)) {
printk(KERN_WARNING "Only S2K ID 3 is currently supported\n");
rc = -ENOSYS;
int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig)
{
struct ecryptfs_key_sig *new_key_sig;
- int rc = 0;
new_key_sig = kmem_cache_alloc(ecryptfs_key_sig_cache, GFP_KERNEL);
if (!new_key_sig) {
- rc = -ENOMEM;
printk(KERN_ERR
"Error allocating from ecryptfs_key_sig_cache\n");
- goto out;
+ return -ENOMEM;
}
memcpy(new_key_sig->keysig, sig, ECRYPTFS_SIG_SIZE_HEX);
- mutex_lock(&crypt_stat->keysig_list_mutex);
+ /* Caller must hold keysig_list_mutex */
list_add(&new_key_sig->crypt_stat_list, &crypt_stat->keysig_list);
- mutex_unlock(&crypt_stat->keysig_list_mutex);
-out:
- return rc;
+
+ return 0;
}
struct kmem_cache *ecryptfs_global_auth_tok_cache;
const struct cred *cred)
{
struct ecryptfs_open_req *req;
+ int flags = O_LARGEFILE;
int rc = 0;
/* Corresponding dput() and mntput() are done when the
* destroyed. */
dget(lower_dentry);
mntget(lower_mnt);
- (*lower_file) = dentry_open(lower_dentry, lower_mnt,
- (O_RDWR | O_LARGEFILE), cred);
+ flags |= IS_RDONLY(lower_dentry->d_inode) ? O_RDONLY : O_RDWR;
+ (*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
if (!IS_ERR(*lower_file))
goto out;
+ if (flags & O_RDONLY) {
+ rc = PTR_ERR((*lower_file));
+ goto out;
+ }
req = kmem_cache_alloc(ecryptfs_open_req_cache, GFP_KERNEL);
if (!req) {
rc = -ENOMEM;
__func__);
goto out_unlock;
}
- if (IS_ERR(*req->lower_file)) {
+ if (IS_ERR(*req->lower_file))
rc = PTR_ERR(*req->lower_file);
- dget(lower_dentry);
- mntget(lower_mnt);
- (*lower_file) = dentry_open(lower_dentry, lower_mnt,
- (O_RDONLY | O_LARGEFILE), cred);
- if (IS_ERR(*lower_file)) {
- rc = PTR_ERR(*req->lower_file);
- (*lower_file) = NULL;
- printk(KERN_WARNING "%s: Error attempting privileged "
- "open of lower file with either RW or RO "
- "perms; rc = [%d]. Giving up.\n",
- __func__, rc);
- }
- }
out_unlock:
mutex_unlock(&req->mux);
out_free:
#include <linux/key.h>
#include <linux/parser.h>
#include <linux/fs_stack.h>
+#include <linux/ima.h>
#include "ecryptfs_kernel.h"
/**
const struct cred *cred = current_cred();
struct ecryptfs_inode_info *inode_info =
ecryptfs_inode_to_private(ecryptfs_dentry->d_inode);
+ int opened_lower_file = 0;
int rc = 0;
mutex_lock(&inode_info->lower_file_mutex);
lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
rc = ecryptfs_privileged_open(&inode_info->lower_file,
lower_dentry, lower_mnt, cred);
- if (rc || IS_ERR(inode_info->lower_file)) {
+ if (rc) {
printk(KERN_ERR "Error opening lower persistent file "
"for lower_dentry [0x%p] and lower_mnt [0x%p]; "
"rc = [%d]\n", lower_dentry, lower_mnt, rc);
- rc = PTR_ERR(inode_info->lower_file);
inode_info->lower_file = NULL;
- }
+ } else
+ opened_lower_file = 1;
}
mutex_unlock(&inode_info->lower_file_mutex);
+ if (opened_lower_file)
+ ima_counts_get(inode_info->lower_file);
return rc;
}
rc = ecryptfs_write_lower(ecryptfs_inode, file_size_virt, 0,
sizeof(u64));
kfree(file_size_virt);
- if (rc)
+ if (rc < 0)
printk(KERN_ERR "%s: Error writing file size to header; "
"rc = [%d]\n", __func__, rc);
+ else
+ rc = 0;
out:
return rc;
}
*
* Write data to the lower file.
*
- * Returns zero on success; non-zero on error
+ * Returns bytes written on success; less than zero on error
*/
int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data,
loff_t offset, size_t size)
{
struct ecryptfs_inode_info *inode_info;
- ssize_t octets_written;
mm_segment_t fs_save;
- int rc = 0;
+ ssize_t rc;
inode_info = ecryptfs_inode_to_private(ecryptfs_inode);
mutex_lock(&inode_info->lower_file_mutex);
inode_info->lower_file->f_pos = offset;
fs_save = get_fs();
set_fs(get_ds());
- octets_written = vfs_write(inode_info->lower_file, data, size,
- &inode_info->lower_file->f_pos);
+ rc = vfs_write(inode_info->lower_file, data, size,
+ &inode_info->lower_file->f_pos);
set_fs(fs_save);
- if (octets_written < 0) {
- printk(KERN_ERR "%s: octets_written = [%td]; "
- "expected [%td]\n", __func__, octets_written, size);
- rc = -EINVAL;
- }
mutex_unlock(&inode_info->lower_file_mutex);
mark_inode_dirty_sync(ecryptfs_inode);
return rc;
+ offset_in_page);
virt = kmap(page_for_lower);
rc = ecryptfs_write_lower(ecryptfs_inode, virt, offset, size);
+ if (rc > 0)
+ rc = 0;
kunmap(page_for_lower);
return rc;
}
* Read @size bytes of data at byte offset @offset from the lower
* inode into memory location @data.
*
- * Returns zero on success; non-zero on error
+ * Returns bytes read on success; 0 on EOF; less than zero on error
*/
int ecryptfs_read_lower(char *data, loff_t offset, size_t size,
struct inode *ecryptfs_inode)
{
struct ecryptfs_inode_info *inode_info =
ecryptfs_inode_to_private(ecryptfs_inode);
- ssize_t octets_read;
mm_segment_t fs_save;
- int rc = 0;
+ ssize_t rc;
mutex_lock(&inode_info->lower_file_mutex);
BUG_ON(!inode_info->lower_file);
inode_info->lower_file->f_pos = offset;
fs_save = get_fs();
set_fs(get_ds());
- octets_read = vfs_read(inode_info->lower_file, data, size,
- &inode_info->lower_file->f_pos);
+ rc = vfs_read(inode_info->lower_file, data, size,
+ &inode_info->lower_file->f_pos);
set_fs(fs_save);
- if (octets_read < 0) {
- printk(KERN_ERR "%s: octets_read = [%td]; "
- "expected [%td]\n", __func__, octets_read, size);
- rc = -EINVAL;
- }
mutex_unlock(&inode_info->lower_file_mutex);
return rc;
}
offset = ((((loff_t)page_index) << PAGE_CACHE_SHIFT) + offset_in_page);
virt = kmap(page_for_ecryptfs);
rc = ecryptfs_read_lower(virt, offset, size, ecryptfs_inode);
+ if (rc > 0)
+ rc = 0;
kunmap(page_for_ecryptfs);
flush_dcache_page(page_for_ecryptfs);
return rc;
struct ecryptfs_inode_info *inode_info;
inode_info = ecryptfs_inode_to_private(inode);
- mutex_lock(&inode_info->lower_file_mutex);
if (inode_info->lower_file) {
struct dentry *lower_dentry =
inode_info->lower_file->f_dentry;
d_drop(lower_dentry);
}
}
- mutex_unlock(&inode_info->lower_file_mutex);
ecryptfs_destroy_crypt_stat(&inode_info->crypt_stat);
kmem_cache_free(ecryptfs_inode_info_cache, inode_info);
}
#include <linux/kmod.h>
#include <linux/fsnotify.h>
#include <linux/fs_struct.h>
+#include <linux/pipe_fs_i.h>
#include <asm/uaccess.h>
#include <asm/mmu_context.h>
int core_uses_pid;
char core_pattern[CORENAME_MAX_SIZE] = "core";
+unsigned int core_pipe_limit;
int suid_dumpable = 0;
/* The maximal length of core_pattern is also specified in sysctl.c */
return retval;
}
-int set_binfmt(struct linux_binfmt *new)
+void set_binfmt(struct linux_binfmt *new)
{
- struct linux_binfmt *old = current->binfmt;
+ struct mm_struct *mm = current->mm;
- if (new) {
- if (!try_module_get(new->module))
- return -1;
- }
- current->binfmt = new;
- if (old)
- module_put(old->module);
- return 0;
+ if (mm->binfmt)
+ module_put(mm->binfmt->module);
+
+ mm->binfmt = new;
+ if (new)
+ __module_get(new->module);
}
EXPORT_SYMBOL(set_binfmt);
return (ret >= 2) ? 2 : ret;
}
+static void wait_for_dump_helpers(struct file *file)
+{
+ struct pipe_inode_info *pipe;
+
+ pipe = file->f_path.dentry->d_inode->i_pipe;
+
+ pipe_lock(pipe);
+ pipe->readers++;
+ pipe->writers--;
+
+ while ((pipe->readers > 1) && (!signal_pending(current))) {
+ wake_up_interruptible_sync(&pipe->wait);
+ kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
+ pipe_wait(pipe);
+ }
+
+ pipe->readers--;
+ pipe->writers++;
+ pipe_unlock(pipe);
+
+}
+
+
void do_coredump(long signr, int exit_code, struct pt_regs *regs)
{
struct core_state core_state;
unsigned long core_limit = current->signal->rlim[RLIMIT_CORE].rlim_cur;
char **helper_argv = NULL;
int helper_argc = 0;
- char *delimit;
+ int dump_count = 0;
+ static atomic_t core_dump_count = ATOMIC_INIT(0);
audit_core_dumps(signr);
- binfmt = current->binfmt;
+ binfmt = mm->binfmt;
if (!binfmt || !binfmt->core_dump)
goto fail;
lock_kernel();
ispipe = format_corename(corename, signr);
unlock_kernel();
- /*
- * Don't bother to check the RLIMIT_CORE value if core_pattern points
- * to a pipe. Since we're not writing directly to the filesystem
- * RLIMIT_CORE doesn't really apply, as no actual core file will be
- * created unless the pipe reader choses to write out the core file
- * at which point file size limits and permissions will be imposed
- * as it does with any other process
- */
+
if ((!ispipe) && (core_limit < binfmt->min_coredump))
goto fail_unlock;
if (ispipe) {
+ if (core_limit == 0) {
+ /*
+ * Normally core limits are irrelevant to pipes, since
+ * we're not writing to the file system, but we use
+ * core_limit of 0 here as a speacial value. Any
+ * non-zero limit gets set to RLIM_INFINITY below, but
+ * a limit of 0 skips the dump. This is a consistent
+ * way to catch recursive crashes. We can still crash
+ * if the core_pattern binary sets RLIM_CORE = !0
+ * but it runs as root, and can do lots of stupid things
+ * Note that we use task_tgid_vnr here to grab the pid
+ * of the process group leader. That way we get the
+ * right pid if a thread in a multi-threaded
+ * core_pattern process dies.
+ */
+ printk(KERN_WARNING
+ "Process %d(%s) has RLIMIT_CORE set to 0\n",
+ task_tgid_vnr(current), current->comm);
+ printk(KERN_WARNING "Aborting core\n");
+ goto fail_unlock;
+ }
+
+ dump_count = atomic_inc_return(&core_dump_count);
+ if (core_pipe_limit && (core_pipe_limit < dump_count)) {
+ printk(KERN_WARNING "Pid %d(%s) over core_pipe_limit\n",
+ task_tgid_vnr(current), current->comm);
+ printk(KERN_WARNING "Skipping core dump\n");
+ goto fail_dropcount;
+ }
+
helper_argv = argv_split(GFP_KERNEL, corename+1, &helper_argc);
if (!helper_argv) {
printk(KERN_WARNING "%s failed to allocate memory\n",
__func__);
- goto fail_unlock;
- }
- /* Terminate the string before the first option */
- delimit = strchr(corename, ' ');
- if (delimit)
- *delimit = '\0';
- delimit = strrchr(helper_argv[0], '/');
- if (delimit)
- delimit++;
- else
- delimit = helper_argv[0];
- if (!strcmp(delimit, current->comm)) {
- printk(KERN_NOTICE "Recursive core dump detected, "
- "aborting\n");
- goto fail_unlock;
+ goto fail_dropcount;
}
core_limit = RLIM_INFINITY;
/* SIGPIPE can happen, but it's just never processed */
- if (call_usermodehelper_pipe(corename+1, helper_argv, NULL,
+ if (call_usermodehelper_pipe(helper_argv[0], helper_argv, NULL,
&file)) {
printk(KERN_INFO "Core dump to %s pipe failed\n",
corename);
- goto fail_unlock;
+ goto fail_dropcount;
}
} else
file = filp_open(corename,
O_CREAT | 2 | O_NOFOLLOW | O_LARGEFILE | flag,
0600);
if (IS_ERR(file))
- goto fail_unlock;
+ goto fail_dropcount;
inode = file->f_path.dentry->d_inode;
if (inode->i_nlink > 1)
goto close_fail; /* multiple links - don't dump */
if (retval)
current->signal->group_exit_code |= 0x80;
close_fail:
+ if (ispipe && core_pipe_limit)
+ wait_for_dump_helpers(file);
filp_close(file, NULL);
+fail_dropcount:
+ if (dump_count)
+ atomic_dec(&core_dump_count);
fail_unlock:
if (helper_argv)
argv_free(helper_argv);
}
lock_super(sb);
- lock_kernel();
sbi = sb->s_fs_info;
fscb->s_nextid = cpu_to_le64(sbi->s_nextid);
fscb->s_numfiles = cpu_to_le32(sbi->s_numfiles);
out:
if (or)
osd_end_request(or);
- unlock_kernel();
unlock_super(sb);
kfree(fscb);
return ret;
int num_pend;
struct exofs_sb_info *sbi = sb->s_fs_info;
- lock_kernel();
-
if (sb->s_dirt)
exofs_write_super(sb);
osduld_put_device(sbi->s_dev);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
-
- unlock_kernel();
}
/*
.writepages = ext2_writepages,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
const struct address_space_operations ext2_aops_xip = {
.direct_IO = ext2_direct_IO,
.writepages = ext2_writepages,
.migratepage = buffer_migrate_page,
+ .error_remove_page = generic_error_remove_page,
};
/*
.direct_IO = ext3_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext3_writeback_aops = {
.direct_IO = ext3_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext3_journalled_aops = {
.invalidatepage = ext3_invalidatepage,
.releasepage = ext3_releasepage,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
void ext3_set_aops(struct inode *inode)
if (!sbh)
return error;
- es->s_wtime = cpu_to_le32(get_seconds());
+ /*
+ * If the file system is mounted read-only, don't update the
+ * superblock write time. This avoids updating the superblock
+ * write time when we are mounting the root file system
+ * read/only but we need to replay the journal; at that point,
+ * for people who are east of GMT and who make their clock
+ * tick in localtime for Windows bug-for-bug compatibility,
+ * the clock is set in the future, and this will cause e2fsck
+ * to complain and force a full file system check.
+ */
+ if (!(sb->s_flags & MS_RDONLY))
+ es->s_wtime = cpu_to_le32(get_seconds());
es->s_free_blocks_count = cpu_to_le32(ext3_count_free_blocks(sb));
es->s_free_inodes_count = cpu_to_le32(ext3_count_free_inodes(sb));
BUFFER_TRACE(sbh, "marking dirty");
If unsure, say N.
-config EXT4DEV_COMPAT
- bool "Enable ext4dev compatibility"
- depends on EXT4_FS
- help
- Starting with 2.6.28, the name of the ext4 filesystem was
- renamed from ext4dev to ext4. Unfortunately there are some
- legacy userspace programs (such as klibc's fstype) have
- "ext4dev" hardcoded.
-
- To enable backwards compatibility so that systems that are
- still expecting to mount ext4 filesystems using ext4dev,
- choose Y here. This feature will go away by 2.6.31, so
- please arrange to get your userspace programs fixed!
-
config EXT4_FS_XATTR
bool "Ext4 extended attributes"
depends on EXT4_FS
/* data type for block group number */
typedef unsigned int ext4_group_t;
+/*
+ * Flags used in mballoc's allocation_context flags field.
+ *
+ * Also used to show what's going on for debugging purposes when the
+ * flag field is exported via the traceport interface
+ */
/* prefer goal again. length */
#define EXT4_MB_HINT_MERGE 0x0001
int pages_written;
int retval;
};
+#define DIO_AIO_UNWRITTEN 0x1
+typedef struct ext4_io_end {
+ struct list_head list; /* per-file finished AIO list */
+ struct inode *inode; /* file being written to */
+ unsigned int flag; /* unwritten or not */
+ int error; /* I/O error code */
+ ext4_lblk_t offset; /* offset in the file */
+ size_t size; /* size of the extent */
+ struct work_struct work; /* data work queue */
+} ext4_io_end_t;
/*
* Special inodes numbers
/* Call ext4_da_update_reserve_space() after successfully
allocating the blocks */
#define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE 0x0008
-
+ /* caller is from the direct IO path, request to creation of an
+ unitialized extents if not allocated, split the uninitialized
+ extent if blocks has been preallocated already*/
+#define EXT4_GET_BLOCKS_DIO 0x0010
+#define EXT4_GET_BLOCKS_CONVERT 0x0020
+#define EXT4_GET_BLOCKS_DIO_CREATE_EXT (EXT4_GET_BLOCKS_DIO|\
+ EXT4_GET_BLOCKS_CREATE_UNINIT_EXT)
+ /* Convert extent to initialized after direct IO complete */
+#define EXT4_GET_BLOCKS_DIO_CONVERT_EXT (EXT4_GET_BLOCKS_CONVERT|\
+ EXT4_GET_BLOCKS_DIO_CREATE_EXT)
/*
* ioctl commands
static inline __le32 ext4_encode_extra_time(struct timespec *time)
{
return cpu_to_le32((sizeof(time->tv_sec) > 4 ?
- time->tv_sec >> 32 : 0) |
- ((time->tv_nsec << 2) & EXT4_NSEC_MASK));
+ (time->tv_sec >> 32) & EXT4_EPOCH_MASK : 0) |
+ ((time->tv_nsec << EXT4_EPOCH_BITS) & EXT4_NSEC_MASK));
}
static inline void ext4_decode_extra_time(struct timespec *time, __le32 extra)
if (sizeof(time->tv_sec) > 4)
time->tv_sec |= (__u64)(le32_to_cpu(extra) & EXT4_EPOCH_MASK)
<< 32;
- time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> 2;
+ time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> EXT4_EPOCH_BITS;
}
#define EXT4_INODE_SET_XTIME(xtime, inode, raw_inode) \
__u16 i_extra_isize;
spinlock_t i_block_reservation_lock;
+
+ /* completed async DIOs that might need unwritten extents handling */
+ struct list_head i_aio_dio_complete_list;
+ /* current io_end structure for async DIO write*/
+ ext4_io_end_t *cur_aio_dio;
};
/*
#define EXT4_MOUNT_QUOTA 0x80000 /* Some quota option set */
#define EXT4_MOUNT_USRQUOTA 0x100000 /* "old" user quota */
#define EXT4_MOUNT_GRPQUOTA 0x200000 /* "old" group quota */
+#define EXT4_MOUNT_JOURNAL_CHECKSUM 0x800000 /* Journal checksums */
#define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */
#define EXT4_MOUNT_I_VERSION 0x2000000 /* i_version support */
#define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */
unsigned int s_mb_stats;
unsigned int s_mb_order2_reqs;
unsigned int s_mb_group_prealloc;
+ unsigned int s_max_writeback_mb_bump;
/* where last allocation was done - for stream allocation */
unsigned long s_mb_last_group;
unsigned long s_mb_last_start;
- /* history to debug policy */
- struct ext4_mb_history *s_mb_history;
- int s_mb_history_cur;
- int s_mb_history_max;
- int s_mb_history_num;
- spinlock_t s_mb_history_lock;
- int s_mb_history_filter;
-
/* stats for buddy allocator */
spinlock_t s_mb_pa_lock;
atomic_t s_bal_reqs; /* number of reqs with len > 1 */
unsigned int s_log_groups_per_flex;
struct flex_groups *s_flex_groups;
+
+ /* workqueue for dio unwritten */
+ struct workqueue_struct *dio_unwritten_wq;
};
static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb)
struct address_space *mapping, loff_t from);
extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
extern qsize_t ext4_get_reserved_space(struct inode *inode);
-
+extern int flush_aio_dio_completed_IO(struct inode *inode);
/* ioctl.c */
extern long ext4_ioctl(struct file *, unsigned int, unsigned long);
extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long);
extern void ext4_ext_release(struct super_block *);
extern long ext4_fallocate(struct inode *inode, int mode, loff_t offset,
loff_t len);
+extern int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
+ loff_t len);
extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
sector_t block, unsigned int max_blocks,
struct buffer_head *bh, int flags);
(le16_to_cpu(ext->ee_len) - EXT_INIT_MAX_LEN));
}
+static inline void ext4_ext_mark_initialized(struct ext4_extent *ext)
+{
+ ext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ext));
+}
+
extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
extern ext4_fsblk_t ext_pblock(struct ext4_extent *ex);
extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
struct ext4_ext_path *path,
struct ext4_extent *);
extern unsigned int ext4_ext_check_overlap(struct inode *, struct ext4_extent *, struct ext4_ext_path *);
-extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *);
+extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *, int);
extern int ext4_ext_walk_space(struct inode *, ext4_lblk_t, ext4_lblk_t,
ext_prepare_callback, void *);
extern struct ext4_ext_path *ext4_ext_find_extent(struct inode *, ext4_lblk_t,
handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks);
int __ext4_journal_stop(const char *where, handle_t *handle);
-#define EXT4_NOJOURNAL_HANDLE ((handle_t *) 0x1)
+#define EXT4_NOJOURNAL_MAX_REF_COUNT ((unsigned long) 4096)
+/* Note: Do not use this for NULL handles. This is only to determine if
+ * a properly allocated handle is using a journal or not. */
static inline int ext4_handle_valid(handle_t *handle)
{
- if (handle == EXT4_NOJOURNAL_HANDLE)
+ if ((unsigned long)handle < EXT4_NOJOURNAL_MAX_REF_COUNT)
return 0;
return 1;
}
* insert new index [@logical;@ptr] into the block at @curp;
* check where to insert: before @curp or after @curp
*/
-static int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
+int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
struct ext4_ext_path *curp,
int logical, ext4_fsblk_t ptr)
{
*/
int ext4_ext_insert_extent(handle_t *handle, struct inode *inode,
struct ext4_ext_path *path,
- struct ext4_extent *newext)
+ struct ext4_extent *newext, int flag)
{
struct ext4_extent_header *eh;
struct ext4_extent *ex, *fex;
BUG_ON(path[depth].p_hdr == NULL);
/* try to insert block into found extent and return */
- if (ex && ext4_can_extents_be_merged(inode, ex, newext)) {
+ if (ex && (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+ && ext4_can_extents_be_merged(inode, ex, newext)) {
ext_debug("append [%d]%d block to %d:[%d]%d (from %llu)\n",
ext4_ext_is_uninitialized(newext),
ext4_ext_get_actual_len(newext),
merge:
/* try to merge extents to the right */
- ext4_ext_try_to_merge(inode, path, nearex);
+ if (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+ ext4_ext_try_to_merge(inode, path, nearex);
/* try to merge extents to the left */
*/
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+#if defined(AGGRESSIVE_TEST) || defined(CHECK_BINSEARCH) || defined(EXTENTS_STATS)
printk(KERN_INFO "EXT4-fs: file extents enabled");
#ifdef AGGRESSIVE_TEST
printk(", aggressive tests");
printk(", stats");
#endif
printk("\n");
+#endif
#ifdef EXTENTS_STATS
spin_lock_init(&EXT4_SB(sb)->s_ext_stats_lock);
EXT4_SB(sb)->s_ext_min = 1 << 30;
}
#define EXT4_EXT_ZERO_LEN 7
-
/*
* This function is called by ext4_ext_get_blocks() if someone tries to write
* to an uninitialized extent. It may result in splitting the uninitialized
ex3->ee_block = cpu_to_le32(iblock);
ext4_ext_store_pblock(ex3, newblock);
ex3->ee_len = cpu_to_le16(allocated);
- err = ext4_ext_insert_extent(handle, inode, path, ex3);
+ err = ext4_ext_insert_extent(handle, inode, path,
+ ex3, 0);
if (err == -ENOSPC) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
ext4_ext_store_pblock(ex3, newblock + max_blocks);
ex3->ee_len = cpu_to_le16(allocated - max_blocks);
ext4_ext_mark_uninitialized(ex3);
- err = ext4_ext_insert_extent(handle, inode, path, ex3);
+ err = ext4_ext_insert_extent(handle, inode, path, ex3, 0);
if (err == -ENOSPC) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
err = ext4_ext_dirty(handle, inode, path + depth);
goto out;
insert:
- err = ext4_ext_insert_extent(handle, inode, path, &newex);
+ err = ext4_ext_insert_extent(handle, inode, path, &newex, 0);
if (err == -ENOSPC) {
err = ext4_ext_zeroout(inode, &orig_ex);
if (err)
return err;
}
+/*
+ * This function is called by ext4_ext_get_blocks() from
+ * ext4_get_blocks_dio_write() when DIO to write
+ * to an uninitialized extent.
+ *
+ * Writing to an uninitized extent may result in splitting the uninitialized
+ * extent into multiple /intialized unintialized extents (up to three)
+ * There are three possibilities:
+ * a> There is no split required: Entire extent should be uninitialized
+ * b> Splits in two extents: Write is happening at either end of the extent
+ * c> Splits in three extents: Somone is writing in middle of the extent
+ *
+ * One of more index blocks maybe needed if the extent tree grow after
+ * the unintialized extent split. To prevent ENOSPC occur at the IO
+ * complete, we need to split the uninitialized extent before DIO submit
+ * the IO. The uninitilized extent called at this time will be split
+ * into three uninitialized extent(at most). After IO complete, the part
+ * being filled will be convert to initialized by the end_io callback function
+ * via ext4_convert_unwritten_extents().
+ */
+static int ext4_split_unwritten_extents(handle_t *handle,
+ struct inode *inode,
+ struct ext4_ext_path *path,
+ ext4_lblk_t iblock,
+ unsigned int max_blocks,
+ int flags)
+{
+ struct ext4_extent *ex, newex, orig_ex;
+ struct ext4_extent *ex1 = NULL;
+ struct ext4_extent *ex2 = NULL;
+ struct ext4_extent *ex3 = NULL;
+ struct ext4_extent_header *eh;
+ ext4_lblk_t ee_block;
+ unsigned int allocated, ee_len, depth;
+ ext4_fsblk_t newblock;
+ int err = 0;
+ int ret = 0;
+
+ ext_debug("ext4_split_unwritten_extents: inode %lu,"
+ "iblock %llu, max_blocks %u\n", inode->i_ino,
+ (unsigned long long)iblock, max_blocks);
+ depth = ext_depth(inode);
+ eh = path[depth].p_hdr;
+ ex = path[depth].p_ext;
+ ee_block = le32_to_cpu(ex->ee_block);
+ ee_len = ext4_ext_get_actual_len(ex);
+ allocated = ee_len - (iblock - ee_block);
+ newblock = iblock - ee_block + ext_pblock(ex);
+ ex2 = ex;
+ orig_ex.ee_block = ex->ee_block;
+ orig_ex.ee_len = cpu_to_le16(ee_len);
+ ext4_ext_store_pblock(&orig_ex, ext_pblock(ex));
+
+ /*
+ * if the entire unintialized extent length less than
+ * the size of extent to write, there is no need to split
+ * uninitialized extent
+ */
+ if (allocated <= max_blocks)
+ return ret;
+
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ goto out;
+ /* ex1: ee_block to iblock - 1 : uninitialized */
+ if (iblock > ee_block) {
+ ex1 = ex;
+ ex1->ee_len = cpu_to_le16(iblock - ee_block);
+ ext4_ext_mark_uninitialized(ex1);
+ ex2 = &newex;
+ }
+ /*
+ * for sanity, update the length of the ex2 extent before
+ * we insert ex3, if ex1 is NULL. This is to avoid temporary
+ * overlap of blocks.
+ */
+ if (!ex1 && allocated > max_blocks)
+ ex2->ee_len = cpu_to_le16(max_blocks);
+ /* ex3: to ee_block + ee_len : uninitialised */
+ if (allocated > max_blocks) {
+ unsigned int newdepth;
+ ex3 = &newex;
+ ex3->ee_block = cpu_to_le32(iblock + max_blocks);
+ ext4_ext_store_pblock(ex3, newblock + max_blocks);
+ ex3->ee_len = cpu_to_le16(allocated - max_blocks);
+ ext4_ext_mark_uninitialized(ex3);
+ err = ext4_ext_insert_extent(handle, inode, path, ex3, flags);
+ if (err == -ENOSPC) {
+ err = ext4_ext_zeroout(inode, &orig_ex);
+ if (err)
+ goto fix_extent_len;
+ /* update the extent length and mark as initialized */
+ ex->ee_block = orig_ex.ee_block;
+ ex->ee_len = orig_ex.ee_len;
+ ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+ ext4_ext_dirty(handle, inode, path + depth);
+ /* zeroed the full extent */
+ /* blocks available from iblock */
+ return allocated;
+
+ } else if (err)
+ goto fix_extent_len;
+ /*
+ * The depth, and hence eh & ex might change
+ * as part of the insert above.
+ */
+ newdepth = ext_depth(inode);
+ /*
+ * update the extent length after successful insert of the
+ * split extent
+ */
+ orig_ex.ee_len = cpu_to_le16(ee_len -
+ ext4_ext_get_actual_len(ex3));
+ depth = newdepth;
+ ext4_ext_drop_refs(path);
+ path = ext4_ext_find_extent(inode, iblock, path);
+ if (IS_ERR(path)) {
+ err = PTR_ERR(path);
+ goto out;
+ }
+ eh = path[depth].p_hdr;
+ ex = path[depth].p_ext;
+ if (ex2 != &newex)
+ ex2 = ex;
+
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ goto out;
+
+ allocated = max_blocks;
+ }
+ /*
+ * If there was a change of depth as part of the
+ * insertion of ex3 above, we need to update the length
+ * of the ex1 extent again here
+ */
+ if (ex1 && ex1 != ex) {
+ ex1 = ex;
+ ex1->ee_len = cpu_to_le16(iblock - ee_block);
+ ext4_ext_mark_uninitialized(ex1);
+ ex2 = &newex;
+ }
+ /*
+ * ex2: iblock to iblock + maxblocks-1 : to be direct IO written,
+ * uninitialised still.
+ */
+ ex2->ee_block = cpu_to_le32(iblock);
+ ext4_ext_store_pblock(ex2, newblock);
+ ex2->ee_len = cpu_to_le16(allocated);
+ ext4_ext_mark_uninitialized(ex2);
+ if (ex2 != ex)
+ goto insert;
+ /* Mark modified extent as dirty */
+ err = ext4_ext_dirty(handle, inode, path + depth);
+ ext_debug("out here\n");
+ goto out;
+insert:
+ err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
+ if (err == -ENOSPC) {
+ err = ext4_ext_zeroout(inode, &orig_ex);
+ if (err)
+ goto fix_extent_len;
+ /* update the extent length and mark as initialized */
+ ex->ee_block = orig_ex.ee_block;
+ ex->ee_len = orig_ex.ee_len;
+ ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+ ext4_ext_dirty(handle, inode, path + depth);
+ /* zero out the first half */
+ return allocated;
+ } else if (err)
+ goto fix_extent_len;
+out:
+ ext4_ext_show_leaf(inode, path);
+ return err ? err : allocated;
+
+fix_extent_len:
+ ex->ee_block = orig_ex.ee_block;
+ ex->ee_len = orig_ex.ee_len;
+ ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+ ext4_ext_mark_uninitialized(ex);
+ ext4_ext_dirty(handle, inode, path + depth);
+ return err;
+}
+static int ext4_convert_unwritten_extents_dio(handle_t *handle,
+ struct inode *inode,
+ struct ext4_ext_path *path)
+{
+ struct ext4_extent *ex;
+ struct ext4_extent_header *eh;
+ int depth;
+ int err = 0;
+ int ret = 0;
+
+ depth = ext_depth(inode);
+ eh = path[depth].p_hdr;
+ ex = path[depth].p_ext;
+
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ goto out;
+ /* first mark the extent as initialized */
+ ext4_ext_mark_initialized(ex);
+
+ /*
+ * We have to see if it can be merged with the extent
+ * on the left.
+ */
+ if (ex > EXT_FIRST_EXTENT(eh)) {
+ /*
+ * To merge left, pass "ex - 1" to try_to_merge(),
+ * since it merges towards right _only_.
+ */
+ ret = ext4_ext_try_to_merge(inode, path, ex - 1);
+ if (ret) {
+ err = ext4_ext_correct_indexes(handle, inode, path);
+ if (err)
+ goto out;
+ depth = ext_depth(inode);
+ ex--;
+ }
+ }
+ /*
+ * Try to Merge towards right.
+ */
+ ret = ext4_ext_try_to_merge(inode, path, ex);
+ if (ret) {
+ err = ext4_ext_correct_indexes(handle, inode, path);
+ if (err)
+ goto out;
+ depth = ext_depth(inode);
+ }
+ /* Mark modified extent as dirty */
+ err = ext4_ext_dirty(handle, inode, path + depth);
+out:
+ ext4_ext_show_leaf(inode, path);
+ return err;
+}
+
+static int
+ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
+ ext4_lblk_t iblock, unsigned int max_blocks,
+ struct ext4_ext_path *path, int flags,
+ unsigned int allocated, struct buffer_head *bh_result,
+ ext4_fsblk_t newblock)
+{
+ int ret = 0;
+ int err = 0;
+ ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
+
+ ext_debug("ext4_ext_handle_uninitialized_extents: inode %lu, logical"
+ "block %llu, max_blocks %u, flags %d, allocated %u",
+ inode->i_ino, (unsigned long long)iblock, max_blocks,
+ flags, allocated);
+ ext4_ext_show_leaf(inode, path);
+
+ /* DIO get_block() before submit the IO, split the extent */
+ if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) {
+ ret = ext4_split_unwritten_extents(handle,
+ inode, path, iblock,
+ max_blocks, flags);
+ /* flag the io_end struct that we need convert when IO done */
+ if (io)
+ io->flag = DIO_AIO_UNWRITTEN;
+ goto out;
+ }
+ /* DIO end_io complete, convert the filled extent to written */
+ if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) {
+ ret = ext4_convert_unwritten_extents_dio(handle, inode,
+ path);
+ goto out2;
+ }
+ /* buffered IO case */
+ /*
+ * repeat fallocate creation request
+ * we already have an unwritten extent
+ */
+ if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
+ goto map_out;
+
+ /* buffered READ or buffered write_begin() lookup */
+ if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
+ /*
+ * We have blocks reserved already. We
+ * return allocated blocks so that delalloc
+ * won't do block reservation for us. But
+ * the buffer head will be unmapped so that
+ * a read from the block returns 0s.
+ */
+ set_buffer_unwritten(bh_result);
+ goto out1;
+ }
+
+ /* buffered write, writepage time, convert*/
+ ret = ext4_ext_convert_to_initialized(handle, inode,
+ path, iblock,
+ max_blocks);
+out:
+ if (ret <= 0) {
+ err = ret;
+ goto out2;
+ } else
+ allocated = ret;
+ set_buffer_new(bh_result);
+map_out:
+ set_buffer_mapped(bh_result);
+out1:
+ if (allocated > max_blocks)
+ allocated = max_blocks;
+ ext4_ext_show_leaf(inode, path);
+ bh_result->b_bdev = inode->i_sb->s_bdev;
+ bh_result->b_blocknr = newblock;
+out2:
+ if (path) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ }
+ return err ? err : allocated;
+}
/*
* Block allocation/map/preallocation routine for extents based files
*
int err = 0, depth, ret, cache_type;
unsigned int allocated = 0;
struct ext4_allocation_request ar;
+ ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
__clear_bit(BH_New, &bh_result->b_state);
ext_debug("blocks %u/%u requested for inode %lu\n",
EXT4_EXT_CACHE_EXTENT);
goto out;
}
- if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
- goto out;
- if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
- if (allocated > max_blocks)
- allocated = max_blocks;
- /*
- * We have blocks reserved already. We
- * return allocated blocks so that delalloc
- * won't do block reservation for us. But
- * the buffer head will be unmapped so that
- * a read from the block returns 0s.
- */
- set_buffer_unwritten(bh_result);
- bh_result->b_bdev = inode->i_sb->s_bdev;
- bh_result->b_blocknr = newblock;
- goto out2;
- }
-
- ret = ext4_ext_convert_to_initialized(handle, inode,
- path, iblock,
- max_blocks);
- if (ret <= 0) {
- err = ret;
- goto out2;
- } else
- allocated = ret;
- goto outnew;
+ ret = ext4_ext_handle_uninitialized_extents(handle,
+ inode, iblock, max_blocks, path,
+ flags, allocated, bh_result, newblock);
+ return ret;
}
}
/* try to insert new extent into found leaf and return */
ext4_ext_store_pblock(&newex, newblock);
newex.ee_len = cpu_to_le16(ar.len);
- if (flags & EXT4_GET_BLOCKS_UNINIT_EXT) /* Mark uninitialized */
+ /* Mark uninitialized */
+ if (flags & EXT4_GET_BLOCKS_UNINIT_EXT){
ext4_ext_mark_uninitialized(&newex);
- err = ext4_ext_insert_extent(handle, inode, path, &newex);
+ /*
+ * io_end structure was created for every async
+ * direct IO write to the middle of the file.
+ * To avoid unecessary convertion for every aio dio rewrite
+ * to the mid of file, here we flag the IO that is really
+ * need the convertion.
+ *
+ */
+ if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+ io->flag = DIO_AIO_UNWRITTEN;
+ }
+ err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
if (err) {
/* free data blocks we just allocated */
/* not a good idea to call discard here directly,
/* previous routine could use block we allocated */
newblock = ext_pblock(&newex);
allocated = ext4_ext_get_actual_len(&newex);
-outnew:
set_buffer_new(bh_result);
/* Cache only when it is _not_ an uninitialized extent */
return ret > 0 ? ret2 : ret;
}
+/*
+ * This function convert a range of blocks to written extents
+ * The caller of this function will pass the start offset and the size.
+ * all unwritten extents within this range will be converted to
+ * written extents.
+ *
+ * This function is called from the direct IO end io call back
+ * function, to convert the fallocated extents after IO is completed.
+ */
+int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
+ loff_t len)
+{
+ handle_t *handle;
+ ext4_lblk_t block;
+ unsigned int max_blocks;
+ int ret = 0;
+ int ret2 = 0;
+ struct buffer_head map_bh;
+ unsigned int credits, blkbits = inode->i_blkbits;
+
+ block = offset >> blkbits;
+ /*
+ * We can't just convert len to max_blocks because
+ * If blocksize = 4096 offset = 3072 and len = 2048
+ */
+ max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
+ - block;
+ /*
+ * credits to insert 1 extent into extent tree
+ */
+ credits = ext4_chunk_trans_blocks(inode, max_blocks);
+ while (ret >= 0 && ret < max_blocks) {
+ block = block + ret;
+ max_blocks = max_blocks - ret;
+ handle = ext4_journal_start(inode, credits);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ break;
+ }
+ map_bh.b_state = 0;
+ ret = ext4_get_blocks(handle, inode, block,
+ max_blocks, &map_bh,
+ EXT4_GET_BLOCKS_DIO_CONVERT_EXT);
+ if (ret <= 0) {
+ WARN_ON(ret <= 0);
+ printk(KERN_ERR "%s: ext4_ext_get_blocks "
+ "returned error inode#%lu, block=%u, "
+ "max_blocks=%u", __func__,
+ inode->i_ino, block, max_blocks);
+ }
+ ext4_mark_inode_dirty(handle, inode);
+ ret2 = ext4_journal_stop(handle);
+ if (ret <= 0 || ret2 )
+ break;
+ }
+ return ret > 0 ? ret2 : ret;
+}
/*
* Callback function called for each extent to gather FIEMAP information.
*/
return generic_file_aio_write(iocb, iov, nr_segs, pos);
}
-static struct vm_operations_struct ext4_file_vm_ops = {
+static const struct vm_operations_struct ext4_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = ext4_page_mkwrite,
};
*
* What we do is just kick off a commit and wait on it. This will snapshot the
* inode to disk.
+ *
+ * i_mutex lock is held when entering and exiting this function
*/
int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
trace_ext4_sync_file(file, dentry, datasync);
+ ret = flush_aio_dio_completed_IO(inode);
+ if (ret < 0)
+ goto out;
/*
* data=writeback:
* The caller's filemap_fdatawrite()/wait will sync the data.
#include <linux/namei.h>
#include <linux/uio.h>
#include <linux/bio.h>
+#include <linux/workqueue.h>
#include "ext4_jbd2.h"
#include "xattr.h"
return 0;
}
+/*
+ * Return the number of contiguous dirty pages in a given inode
+ * starting at page frame idx.
+ */
+static pgoff_t ext4_num_dirty_pages(struct inode *inode, pgoff_t idx,
+ unsigned int max_pages)
+{
+ struct address_space *mapping = inode->i_mapping;
+ pgoff_t index;
+ struct pagevec pvec;
+ pgoff_t num = 0;
+ int i, nr_pages, done = 0;
+
+ if (max_pages == 0)
+ return 0;
+ pagevec_init(&pvec, 0);
+ while (!done) {
+ index = idx;
+ nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
+ PAGECACHE_TAG_DIRTY,
+ (pgoff_t)PAGEVEC_SIZE);
+ if (nr_pages == 0)
+ break;
+ for (i = 0; i < nr_pages; i++) {
+ struct page *page = pvec.pages[i];
+ struct buffer_head *bh, *head;
+
+ lock_page(page);
+ if (unlikely(page->mapping != mapping) ||
+ !PageDirty(page) ||
+ PageWriteback(page) ||
+ page->index != idx) {
+ done = 1;
+ unlock_page(page);
+ break;
+ }
+ if (page_has_buffers(page)) {
+ bh = head = page_buffers(page);
+ do {
+ if (!buffer_delay(bh) &&
+ !buffer_unwritten(bh))
+ done = 1;
+ bh = bh->b_this_page;
+ } while (!done && (bh != head));
+ }
+ unlock_page(page);
+ if (done)
+ break;
+ idx++;
+ num++;
+ if (num >= max_pages)
+ break;
+ }
+ pagevec_release(&pvec);
+ }
+ return num;
+}
+
/*
* The ext4_get_blocks() function tries to look up the requested blocks,
* and returns if the blocks are already mapped.
clear_buffer_mapped(bh);
clear_buffer_unwritten(bh);
+ ext_debug("ext4_get_blocks(): inode %lu, flag %d, max_blocks %u,"
+ "logical block %lu\n", inode->i_ino, flags, max_blocks,
+ (unsigned long)block);
/*
* Try to see if we can get the block without requesting a new
* file system block.
if (ext4_claim_free_blocks(sbi, total)) {
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ vfs_dq_release_reservation_block(inode, total);
if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
yield();
goto repeat;
}
- vfs_dq_release_reservation_block(inode, total);
return -ENOSPC;
}
EXT4_I(inode)->i_reserved_data_blocks += nrblocks;
static void ext4_print_free_blocks(struct inode *inode)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
- printk(KERN_EMERG "Total free blocks count %lld\n",
- ext4_count_free_blocks(inode->i_sb));
- printk(KERN_EMERG "Free/Dirty block details\n");
- printk(KERN_EMERG "free_blocks=%lld\n",
- (long long)percpu_counter_sum(&sbi->s_freeblocks_counter));
- printk(KERN_EMERG "dirty_blocks=%lld\n",
- (long long)percpu_counter_sum(&sbi->s_dirtyblocks_counter));
- printk(KERN_EMERG "Block reservation details\n");
- printk(KERN_EMERG "i_reserved_data_blocks=%u\n",
- EXT4_I(inode)->i_reserved_data_blocks);
- printk(KERN_EMERG "i_reserved_meta_blocks=%u\n",
- EXT4_I(inode)->i_reserved_meta_blocks);
+ printk(KERN_CRIT "Total free blocks count %lld\n",
+ ext4_count_free_blocks(inode->i_sb));
+ printk(KERN_CRIT "Free/Dirty block details\n");
+ printk(KERN_CRIT "free_blocks=%lld\n",
+ (long long) percpu_counter_sum(&sbi->s_freeblocks_counter));
+ printk(KERN_CRIT "dirty_blocks=%lld\n",
+ (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
+ printk(KERN_CRIT "Block reservation details\n");
+ printk(KERN_CRIT "i_reserved_data_blocks=%u\n",
+ EXT4_I(inode)->i_reserved_data_blocks);
+ printk(KERN_CRIT "i_reserved_meta_blocks=%u\n",
+ EXT4_I(inode)->i_reserved_meta_blocks);
return;
}
* writepage and writepages will again try to write
* the same.
*/
- printk(KERN_EMERG "%s block allocation failed for inode %lu "
- "at logical offset %llu with max blocks "
- "%zd with error %d\n",
- __func__, mpd->inode->i_ino,
- (unsigned long long)next,
- mpd->b_size >> mpd->inode->i_blkbits, err);
- printk(KERN_EMERG "This should not happen.!! "
- "Data will be lost\n");
+ ext4_msg(mpd->inode->i_sb, KERN_CRIT,
+ "delayed block allocation failed for inode %lu at "
+ "logical offset %llu with max blocks %zd with "
+ "error %d\n", mpd->inode->i_ino,
+ (unsigned long long) next,
+ mpd->b_size >> mpd->inode->i_blkbits, err);
+ printk(KERN_CRIT "This should not happen!! "
+ "Data will be lost\n");
if (err == -ENOSPC) {
ext4_print_free_blocks(mpd->inode);
}
int no_nrwrite_index_update;
int pages_written = 0;
long pages_skipped;
+ unsigned int max_pages;
int range_cyclic, cycled = 1, io_done = 0;
- int needed_blocks, ret = 0, nr_to_writebump = 0;
+ int needed_blocks, ret = 0;
+ long desired_nr_to_write, nr_to_writebump = 0;
loff_t range_start = wbc->range_start;
struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED))
return -EROFS;
- /*
- * Make sure nr_to_write is >= sbi->s_mb_stream_request
- * This make sure small files blocks are allocated in
- * single attempt. This ensure that small files
- * get less fragmented.
- */
- if (wbc->nr_to_write < sbi->s_mb_stream_request) {
- nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
- wbc->nr_to_write = sbi->s_mb_stream_request;
- }
if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
range_whole = 1;
} else
index = wbc->range_start >> PAGE_CACHE_SHIFT;
+ /*
+ * This works around two forms of stupidity. The first is in
+ * the writeback code, which caps the maximum number of pages
+ * written to be 1024 pages. This is wrong on multiple
+ * levels; different architectues have a different page size,
+ * which changes the maximum amount of data which gets
+ * written. Secondly, 4 megabytes is way too small. XFS
+ * forces this value to be 16 megabytes by multiplying
+ * nr_to_write parameter by four, and then relies on its
+ * allocator to allocate larger extents to make them
+ * contiguous. Unfortunately this brings us to the second
+ * stupidity, which is that ext4's mballoc code only allocates
+ * at most 2048 blocks. So we force contiguous writes up to
+ * the number of dirty blocks in the inode, or
+ * sbi->max_writeback_mb_bump whichever is smaller.
+ */
+ max_pages = sbi->s_max_writeback_mb_bump << (20 - PAGE_CACHE_SHIFT);
+ if (!range_cyclic && range_whole)
+ desired_nr_to_write = wbc->nr_to_write * 8;
+ else
+ desired_nr_to_write = ext4_num_dirty_pages(inode, index,
+ max_pages);
+ if (desired_nr_to_write > max_pages)
+ desired_nr_to_write = max_pages;
+
+ if (wbc->nr_to_write < desired_nr_to_write) {
+ nr_to_writebump = desired_nr_to_write - wbc->nr_to_write;
+ wbc->nr_to_write = desired_nr_to_write;
+ }
+
mpd.wbc = wbc;
mpd.inode = mapping->host;
handle = ext4_journal_start(inode, needed_blocks);
if (IS_ERR(handle)) {
ret = PTR_ERR(handle);
- printk(KERN_CRIT "%s: jbd2_start: "
+ ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
"%ld pages, ino %lu; err %d\n", __func__,
wbc->nr_to_write, inode->i_ino, ret);
- dump_stack();
goto out_writepages;
}
goto retry;
}
if (pages_skipped != wbc->pages_skipped)
- printk(KERN_EMERG "This should not happen leaving %s "
- "with nr_to_write = %ld ret = %d\n",
- __func__, wbc->nr_to_write, ret);
+ ext4_msg(inode->i_sb, KERN_CRIT,
+ "This should not happen leaving %s "
+ "with nr_to_write = %ld ret = %d\n",
+ __func__, wbc->nr_to_write, ret);
/* Update index */
index += pages_written;
out_writepages:
if (!no_nrwrite_index_update)
wbc->no_nrwrite_index_update = 0;
- wbc->nr_to_write -= nr_to_writebump;
+ if (wbc->nr_to_write > nr_to_writebump)
+ wbc->nr_to_write -= nr_to_writebump;
wbc->range_start = range_start;
trace_ext4_da_writepages_result(inode, wbc, ret, pages_written);
return ret;
}
/*
+ * O_DIRECT for ext3 (or indirect map) based files
+ *
* If the O_DIRECT write will extend the file then add this inode to the
* orphan list. So recovery will truncate it back to the original size
* if the machine crashes during the write.
* crashes then stale disk data _may_ be exposed inside the file. But current
* VFS code falls back into buffered path in that case so we are safe.
*/
-static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
+static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb,
const struct iovec *iov, loff_t offset,
unsigned long nr_segs)
{
ssize_t ret;
int orphan = 0;
size_t count = iov_length(iov, nr_segs);
+ int retries = 0;
if (rw == WRITE) {
loff_t final_size = offset + count;
}
}
+retry:
ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
offset, nr_segs,
ext4_get_block, NULL);
+ if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
+ goto retry;
if (orphan) {
int err;
return ret;
}
+/* Maximum number of blocks we map for direct IO at once. */
+
+static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock,
+ struct buffer_head *bh_result, int create)
+{
+ handle_t *handle = NULL;
+ int ret = 0;
+ unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+ int dio_credits;
+
+ ext4_debug("ext4_get_block_dio_write: inode %lu, create flag %d\n",
+ inode->i_ino, create);
+ /*
+ * DIO VFS code passes create = 0 flag for write to
+ * the middle of file. It does this to avoid block
+ * allocation for holes, to prevent expose stale data
+ * out when there is parallel buffered read (which does
+ * not hold the i_mutex lock) while direct IO write has
+ * not completed. DIO request on holes finally falls back
+ * to buffered IO for this reason.
+ *
+ * For ext4 extent based file, since we support fallocate,
+ * new allocated extent as uninitialized, for holes, we
+ * could fallocate blocks for holes, thus parallel
+ * buffered IO read will zero out the page when read on
+ * a hole while parallel DIO write to the hole has not completed.
+ *
+ * when we come here, we know it's a direct IO write to
+ * to the middle of file (<i_size)
+ * so it's safe to override the create flag from VFS.
+ */
+ create = EXT4_GET_BLOCKS_DIO_CREATE_EXT;
+
+ if (max_blocks > DIO_MAX_BLOCKS)
+ max_blocks = DIO_MAX_BLOCKS;
+ dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+ handle = ext4_journal_start(inode, dio_credits);
+ if (IS_ERR(handle)) {
+ ret = PTR_ERR(handle);
+ goto out;
+ }
+ ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result,
+ create);
+ if (ret > 0) {
+ bh_result->b_size = (ret << inode->i_blkbits);
+ ret = 0;
+ }
+ ext4_journal_stop(handle);
+out:
+ return ret;
+}
+
+static void ext4_free_io_end(ext4_io_end_t *io)
+{
+ BUG_ON(!io);
+ iput(io->inode);
+ kfree(io);
+}
+static void dump_aio_dio_list(struct inode * inode)
+{
+#ifdef EXT4_DEBUG
+ struct list_head *cur, *before, *after;
+ ext4_io_end_t *io, *io0, *io1;
+
+ if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){
+ ext4_debug("inode %lu aio dio list is empty\n", inode->i_ino);
+ return;
+ }
+
+ ext4_debug("Dump inode %lu aio_dio_completed_IO list \n", inode->i_ino);
+ list_for_each_entry(io, &EXT4_I(inode)->i_aio_dio_complete_list, list){
+ cur = &io->list;
+ before = cur->prev;
+ io0 = container_of(before, ext4_io_end_t, list);
+ after = cur->next;
+ io1 = container_of(after, ext4_io_end_t, list);
+
+ ext4_debug("io 0x%p from inode %lu,prev 0x%p,next 0x%p\n",
+ io, inode->i_ino, io0, io1);
+ }
+#endif
+}
+
+/*
+ * check a range of space and convert unwritten extents to written.
+ */
+static int ext4_end_aio_dio_nolock(ext4_io_end_t *io)
+{
+ struct inode *inode = io->inode;
+ loff_t offset = io->offset;
+ size_t size = io->size;
+ int ret = 0;
+
+ ext4_debug("end_aio_dio_onlock: io 0x%p from inode %lu,list->next 0x%p,"
+ "list->prev 0x%p\n",
+ io, inode->i_ino, io->list.next, io->list.prev);
+
+ if (list_empty(&io->list))
+ return ret;
+
+ if (io->flag != DIO_AIO_UNWRITTEN)
+ return ret;
+
+ if (offset + size <= i_size_read(inode))
+ ret = ext4_convert_unwritten_extents(inode, offset, size);
+
+ if (ret < 0) {
+ printk(KERN_EMERG "%s: failed to convert unwritten"
+ "extents to written extents, error is %d"
+ " io is still on inode %lu aio dio list\n",
+ __func__, ret, inode->i_ino);
+ return ret;
+ }
+
+ /* clear the DIO AIO unwritten flag */
+ io->flag = 0;
+ return ret;
+}
+/*
+ * work on completed aio dio IO, to convert unwritten extents to extents
+ */
+static void ext4_end_aio_dio_work(struct work_struct *work)
+{
+ ext4_io_end_t *io = container_of(work, ext4_io_end_t, work);
+ struct inode *inode = io->inode;
+ int ret = 0;
+
+ mutex_lock(&inode->i_mutex);
+ ret = ext4_end_aio_dio_nolock(io);
+ if (ret >= 0) {
+ if (!list_empty(&io->list))
+ list_del_init(&io->list);
+ ext4_free_io_end(io);
+ }
+ mutex_unlock(&inode->i_mutex);
+}
+/*
+ * This function is called from ext4_sync_file().
+ *
+ * When AIO DIO IO is completed, the work to convert unwritten
+ * extents to written is queued on workqueue but may not get immediately
+ * scheduled. When fsync is called, we need to ensure the
+ * conversion is complete before fsync returns.
+ * The inode keeps track of a list of completed AIO from DIO path
+ * that might needs to do the conversion. This function walks through
+ * the list and convert the related unwritten extents to written.
+ */
+int flush_aio_dio_completed_IO(struct inode *inode)
+{
+ ext4_io_end_t *io;
+ int ret = 0;
+ int ret2 = 0;
+
+ if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list))
+ return ret;
+
+ dump_aio_dio_list(inode);
+ while (!list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){
+ io = list_entry(EXT4_I(inode)->i_aio_dio_complete_list.next,
+ ext4_io_end_t, list);
+ /*
+ * Calling ext4_end_aio_dio_nolock() to convert completed
+ * IO to written.
+ *
+ * When ext4_sync_file() is called, run_queue() may already
+ * about to flush the work corresponding to this io structure.
+ * It will be upset if it founds the io structure related
+ * to the work-to-be schedule is freed.
+ *
+ * Thus we need to keep the io structure still valid here after
+ * convertion finished. The io structure has a flag to
+ * avoid double converting from both fsync and background work
+ * queue work.
+ */
+ ret = ext4_end_aio_dio_nolock(io);
+ if (ret < 0)
+ ret2 = ret;
+ else
+ list_del_init(&io->list);
+ }
+ return (ret2 < 0) ? ret2 : 0;
+}
+
+static ext4_io_end_t *ext4_init_io_end (struct inode *inode)
+{
+ ext4_io_end_t *io = NULL;
+
+ io = kmalloc(sizeof(*io), GFP_NOFS);
+
+ if (io) {
+ igrab(inode);
+ io->inode = inode;
+ io->flag = 0;
+ io->offset = 0;
+ io->size = 0;
+ io->error = 0;
+ INIT_WORK(&io->work, ext4_end_aio_dio_work);
+ INIT_LIST_HEAD(&io->list);
+ }
+
+ return io;
+}
+
+static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
+ ssize_t size, void *private)
+{
+ ext4_io_end_t *io_end = iocb->private;
+ struct workqueue_struct *wq;
+
+ ext_debug("ext4_end_io_dio(): io_end 0x%p"
+ "for inode %lu, iocb 0x%p, offset %llu, size %llu\n",
+ iocb->private, io_end->inode->i_ino, iocb, offset,
+ size);
+ /* if not async direct IO or dio with 0 bytes write, just return */
+ if (!io_end || !size)
+ return;
+
+ /* if not aio dio with unwritten extents, just free io and return */
+ if (io_end->flag != DIO_AIO_UNWRITTEN){
+ ext4_free_io_end(io_end);
+ iocb->private = NULL;
+ return;
+ }
+
+ io_end->offset = offset;
+ io_end->size = size;
+ wq = EXT4_SB(io_end->inode->i_sb)->dio_unwritten_wq;
+
+ /* queue the work to convert unwritten extents to written */
+ queue_work(wq, &io_end->work);
+
+ /* Add the io_end to per-inode completed aio dio list*/
+ list_add_tail(&io_end->list,
+ &EXT4_I(io_end->inode)->i_aio_dio_complete_list);
+ iocb->private = NULL;
+}
+/*
+ * For ext4 extent files, ext4 will do direct-io write to holes,
+ * preallocated extents, and those write extend the file, no need to
+ * fall back to buffered IO.
+ *
+ * For holes, we fallocate those blocks, mark them as unintialized
+ * If those blocks were preallocated, we mark sure they are splited, but
+ * still keep the range to write as unintialized.
+ *
+ * The unwrritten extents will be converted to written when DIO is completed.
+ * For async direct IO, since the IO may still pending when return, we
+ * set up an end_io call back function, which will do the convertion
+ * when async direct IO completed.
+ *
+ * If the O_DIRECT write will extend the file then add this inode to the
+ * orphan list. So recovery will truncate it back to the original size
+ * if the machine crashes during the write.
+ *
+ */
+static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb,
+ const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs)
+{
+ struct file *file = iocb->ki_filp;
+ struct inode *inode = file->f_mapping->host;
+ ssize_t ret;
+ size_t count = iov_length(iov, nr_segs);
+
+ loff_t final_size = offset + count;
+ if (rw == WRITE && final_size <= inode->i_size) {
+ /*
+ * We could direct write to holes and fallocate.
+ *
+ * Allocated blocks to fill the hole are marked as uninitialized
+ * to prevent paralel buffered read to expose the stale data
+ * before DIO complete the data IO.
+ *
+ * As to previously fallocated extents, ext4 get_block
+ * will just simply mark the buffer mapped but still
+ * keep the extents uninitialized.
+ *
+ * for non AIO case, we will convert those unwritten extents
+ * to written after return back from blockdev_direct_IO.
+ *
+ * for async DIO, the conversion needs to be defered when
+ * the IO is completed. The ext4 end_io callback function
+ * will be called to take care of the conversion work.
+ * Here for async case, we allocate an io_end structure to
+ * hook to the iocb.
+ */
+ iocb->private = NULL;
+ EXT4_I(inode)->cur_aio_dio = NULL;
+ if (!is_sync_kiocb(iocb)) {
+ iocb->private = ext4_init_io_end(inode);
+ if (!iocb->private)
+ return -ENOMEM;
+ /*
+ * we save the io structure for current async
+ * direct IO, so that later ext4_get_blocks()
+ * could flag the io structure whether there
+ * is a unwritten extents needs to be converted
+ * when IO is completed.
+ */
+ EXT4_I(inode)->cur_aio_dio = iocb->private;
+ }
+
+ ret = blockdev_direct_IO(rw, iocb, inode,
+ inode->i_sb->s_bdev, iov,
+ offset, nr_segs,
+ ext4_get_block_dio_write,
+ ext4_end_io_dio);
+ if (iocb->private)
+ EXT4_I(inode)->cur_aio_dio = NULL;
+ /*
+ * The io_end structure takes a reference to the inode,
+ * that structure needs to be destroyed and the
+ * reference to the inode need to be dropped, when IO is
+ * complete, even with 0 byte write, or failed.
+ *
+ * In the successful AIO DIO case, the io_end structure will be
+ * desctroyed and the reference to the inode will be dropped
+ * after the end_io call back function is called.
+ *
+ * In the case there is 0 byte write, or error case, since
+ * VFS direct IO won't invoke the end_io call back function,
+ * we need to free the end_io structure here.
+ */
+ if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) {
+ ext4_free_io_end(iocb->private);
+ iocb->private = NULL;
+ } else if (ret > 0)
+ /*
+ * for non AIO case, since the IO is already
+ * completed, we could do the convertion right here
+ */
+ ret = ext4_convert_unwritten_extents(inode,
+ offset, ret);
+ return ret;
+ }
+
+ /* for write the the end of file case, we fall back to old way */
+ return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
+}
+
+static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
+ const struct iovec *iov, loff_t offset,
+ unsigned long nr_segs)
+{
+ struct file *file = iocb->ki_filp;
+ struct inode *inode = file->f_mapping->host;
+
+ if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
+ return ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs);
+
+ return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
+}
+
/*
* Pages can be marked dirty completely asynchronously from ext4's journalling
* activity. By filemap_sync_pte(), try_to_unmap_one(), etc. We cannot do
.direct_IO = ext4_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext4_writeback_aops = {
.direct_IO = ext4_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext4_journalled_aops = {
.invalidatepage = ext4_invalidatepage,
.releasepage = ext4_releasepage,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations ext4_da_aops = {
.direct_IO = ext4_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
void ext4_set_aops(struct inode *inode)
*/
static int ext4_do_update_inode(handle_t *handle,
struct inode *inode,
- struct ext4_iloc *iloc,
- int do_sync)
+ struct ext4_iloc *iloc)
{
struct ext4_inode *raw_inode = ext4_raw_inode(iloc);
struct ext4_inode_info *ei = EXT4_I(inode);
raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize);
}
- /*
- * If we're not using a journal and we were called from
- * ext4_write_inode() to sync the inode (making do_sync true),
- * we can just use sync_dirty_buffer() directly to do our dirty
- * work. Testing s_journal here is a bit redundant but it's
- * worth it to avoid potential future trouble.
- */
- if (EXT4_SB(inode->i_sb)->s_journal == NULL && do_sync) {
- BUFFER_TRACE(bh, "call sync_dirty_buffer");
- sync_dirty_buffer(bh);
- } else {
- BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
- rc = ext4_handle_dirty_metadata(handle, inode, bh);
- if (!err)
- err = rc;
- }
+ BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
+ rc = ext4_handle_dirty_metadata(handle, inode, bh);
+ if (!err)
+ err = rc;
ei->i_state &= ~EXT4_STATE_NEW;
out_brelse:
err = ext4_get_inode_loc(inode, &iloc);
if (err)
return err;
- err = ext4_do_update_inode(EXT4_NOJOURNAL_HANDLE,
- inode, &iloc, wait);
+ if (wait)
+ sync_dirty_buffer(iloc.bh);
+ if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
+ ext4_error(inode->i_sb, __func__,
+ "IO error syncing inode, "
+ "inode=%lu, block=%llu",
+ inode->i_ino,
+ (unsigned long long)iloc.bh->b_blocknr);
+ err = -EIO;
+ }
}
return err;
}
get_bh(iloc->bh);
/* ext4_do_update_inode() does jbd2_journal_dirty_metadata */
- err = ext4_do_update_inode(handle, inode, iloc, 0);
+ err = ext4_do_update_inode(handle, inode, iloc);
put_bh(iloc->bh);
return err;
}
*/
void ext4_dirty_inode(struct inode *inode)
{
- handle_t *current_handle = ext4_journal_current_handle();
handle_t *handle;
- if (!ext4_handle_valid(current_handle)) {
- ext4_mark_inode_dirty(current_handle, inode);
- return;
- }
-
handle = ext4_journal_start(inode, 2);
if (IS_ERR(handle))
goto out;
- if (current_handle &&
- current_handle->h_transaction != handle->h_transaction) {
- /* This task has a transaction open against a different fs */
- printk(KERN_EMERG "%s: transactions do not match!\n",
- __func__);
- } else {
- jbd_debug(5, "marking dirty. outer handle=%p\n",
- current_handle);
- ext4_mark_inode_dirty(handle, inode);
- }
+
+ ext4_mark_inode_dirty(handle, inode);
+
ext4_journal_stop(handle);
out:
return;
return err;
}
-#ifdef EXT4_MB_HISTORY
-struct ext4_mb_proc_session {
- struct ext4_mb_history *history;
- struct super_block *sb;
- int start;
- int max;
-};
-
-static void *ext4_mb_history_skip_empty(struct ext4_mb_proc_session *s,
- struct ext4_mb_history *hs,
- int first)
-{
- if (hs == s->history + s->max)
- hs = s->history;
- if (!first && hs == s->history + s->start)
- return NULL;
- while (hs->orig.fe_len == 0) {
- hs++;
- if (hs == s->history + s->max)
- hs = s->history;
- if (hs == s->history + s->start)
- return NULL;
- }
- return hs;
-}
-
-static void *ext4_mb_seq_history_start(struct seq_file *seq, loff_t *pos)
-{
- struct ext4_mb_proc_session *s = seq->private;
- struct ext4_mb_history *hs;
- int l = *pos;
-
- if (l == 0)
- return SEQ_START_TOKEN;
- hs = ext4_mb_history_skip_empty(s, s->history + s->start, 1);
- if (!hs)
- return NULL;
- while (--l && (hs = ext4_mb_history_skip_empty(s, ++hs, 0)) != NULL);
- return hs;
-}
-
-static void *ext4_mb_seq_history_next(struct seq_file *seq, void *v,
- loff_t *pos)
-{
- struct ext4_mb_proc_session *s = seq->private;
- struct ext4_mb_history *hs = v;
-
- ++*pos;
- if (v == SEQ_START_TOKEN)
- return ext4_mb_history_skip_empty(s, s->history + s->start, 1);
- else
- return ext4_mb_history_skip_empty(s, ++hs, 0);
-}
-
-static int ext4_mb_seq_history_show(struct seq_file *seq, void *v)
-{
- char buf[25], buf2[25], buf3[25], *fmt;
- struct ext4_mb_history *hs = v;
-
- if (v == SEQ_START_TOKEN) {
- seq_printf(seq, "%-5s %-8s %-23s %-23s %-23s %-5s "
- "%-5s %-2s %-6s %-5s %-5s %-6s\n",
- "pid", "inode", "original", "goal", "result", "found",
- "grps", "cr", "flags", "merge", "tail", "broken");
- return 0;
- }
-
- if (hs->op == EXT4_MB_HISTORY_ALLOC) {
- fmt = "%-5u %-8u %-23s %-23s %-23s %-5u %-5u %-2u "
- "0x%04x %-5s %-5u %-6u\n";
- sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group,
- hs->result.fe_start, hs->result.fe_len,
- hs->result.fe_logical);
- sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group,
- hs->orig.fe_start, hs->orig.fe_len,
- hs->orig.fe_logical);
- sprintf(buf3, "%u/%d/%u@%u", hs->goal.fe_group,
- hs->goal.fe_start, hs->goal.fe_len,
- hs->goal.fe_logical);
- seq_printf(seq, fmt, hs->pid, hs->ino, buf, buf3, buf2,
- hs->found, hs->groups, hs->cr, hs->flags,
- hs->merged ? "M" : "", hs->tail,
- hs->buddy ? 1 << hs->buddy : 0);
- } else if (hs->op == EXT4_MB_HISTORY_PREALLOC) {
- fmt = "%-5u %-8u %-23s %-23s %-23s\n";
- sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group,
- hs->result.fe_start, hs->result.fe_len,
- hs->result.fe_logical);
- sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group,
- hs->orig.fe_start, hs->orig.fe_len,
- hs->orig.fe_logical);
- seq_printf(seq, fmt, hs->pid, hs->ino, buf, "", buf2);
- } else if (hs->op == EXT4_MB_HISTORY_DISCARD) {
- sprintf(buf2, "%u/%d/%u", hs->result.fe_group,
- hs->result.fe_start, hs->result.fe_len);
- seq_printf(seq, "%-5u %-8u %-23s discard\n",
- hs->pid, hs->ino, buf2);
- } else if (hs->op == EXT4_MB_HISTORY_FREE) {
- sprintf(buf2, "%u/%d/%u", hs->result.fe_group,
- hs->result.fe_start, hs->result.fe_len);
- seq_printf(seq, "%-5u %-8u %-23s free\n",
- hs->pid, hs->ino, buf2);
- }
- return 0;
-}
-
-static void ext4_mb_seq_history_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations ext4_mb_seq_history_ops = {
- .start = ext4_mb_seq_history_start,
- .next = ext4_mb_seq_history_next,
- .stop = ext4_mb_seq_history_stop,
- .show = ext4_mb_seq_history_show,
-};
-
-static int ext4_mb_seq_history_open(struct inode *inode, struct file *file)
-{
- struct super_block *sb = PDE(inode)->data;
- struct ext4_sb_info *sbi = EXT4_SB(sb);
- struct ext4_mb_proc_session *s;
- int rc;
- int size;
-
- if (unlikely(sbi->s_mb_history == NULL))
- return -ENOMEM;
- s = kmalloc(sizeof(*s), GFP_KERNEL);
- if (s == NULL)
- return -ENOMEM;
- s->sb = sb;
- size = sizeof(struct ext4_mb_history) * sbi->s_mb_history_max;
- s->history = kmalloc(size, GFP_KERNEL);
- if (s->history == NULL) {
- kfree(s);
- return -ENOMEM;
- }
-
- spin_lock(&sbi->s_mb_history_lock);
- memcpy(s->history, sbi->s_mb_history, size);
- s->max = sbi->s_mb_history_max;
- s->start = sbi->s_mb_history_cur % s->max;
- spin_unlock(&sbi->s_mb_history_lock);
-
- rc = seq_open(file, &ext4_mb_seq_history_ops);
- if (rc == 0) {
- struct seq_file *m = (struct seq_file *)file->private_data;
- m->private = s;
- } else {
- kfree(s->history);
- kfree(s);
- }
- return rc;
-
-}
-
-static int ext4_mb_seq_history_release(struct inode *inode, struct file *file)
-{
- struct seq_file *seq = (struct seq_file *)file->private_data;
- struct ext4_mb_proc_session *s = seq->private;
- kfree(s->history);
- kfree(s);
- return seq_release(inode, file);
-}
-
-static ssize_t ext4_mb_seq_history_write(struct file *file,
- const char __user *buffer,
- size_t count, loff_t *ppos)
-{
- struct seq_file *seq = (struct seq_file *)file->private_data;
- struct ext4_mb_proc_session *s = seq->private;
- struct super_block *sb = s->sb;
- char str[32];
- int value;
-
- if (count >= sizeof(str)) {
- printk(KERN_ERR "EXT4-fs: %s string too long, max %u bytes\n",
- "mb_history", (int)sizeof(str));
- return -EOVERFLOW;
- }
-
- if (copy_from_user(str, buffer, count))
- return -EFAULT;
-
- value = simple_strtol(str, NULL, 0);
- if (value < 0)
- return -ERANGE;
- EXT4_SB(sb)->s_mb_history_filter = value;
-
- return count;
-}
-
-static const struct file_operations ext4_mb_seq_history_fops = {
- .owner = THIS_MODULE,
- .open = ext4_mb_seq_history_open,
- .read = seq_read,
- .write = ext4_mb_seq_history_write,
- .llseek = seq_lseek,
- .release = ext4_mb_seq_history_release,
-};
-
static void *ext4_mb_seq_groups_start(struct seq_file *seq, loff_t *pos)
{
struct super_block *sb = seq->private;
.release = seq_release,
};
-static void ext4_mb_history_release(struct super_block *sb)
-{
- struct ext4_sb_info *sbi = EXT4_SB(sb);
-
- if (sbi->s_proc != NULL) {
- remove_proc_entry("mb_groups", sbi->s_proc);
- if (sbi->s_mb_history_max)
- remove_proc_entry("mb_history", sbi->s_proc);
- }
- kfree(sbi->s_mb_history);
-}
-
-static void ext4_mb_history_init(struct super_block *sb)
-{
- struct ext4_sb_info *sbi = EXT4_SB(sb);
- int i;
-
- if (sbi->s_proc != NULL) {
- if (sbi->s_mb_history_max)
- proc_create_data("mb_history", S_IRUGO, sbi->s_proc,
- &ext4_mb_seq_history_fops, sb);
- proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
- &ext4_mb_seq_groups_fops, sb);
- }
-
- sbi->s_mb_history_cur = 0;
- spin_lock_init(&sbi->s_mb_history_lock);
- i = sbi->s_mb_history_max * sizeof(struct ext4_mb_history);
- sbi->s_mb_history = i ? kzalloc(i, GFP_KERNEL) : NULL;
- /* if we can't allocate history, then we simple won't use it */
-}
-
-static noinline_for_stack void
-ext4_mb_store_history(struct ext4_allocation_context *ac)
-{
- struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
- struct ext4_mb_history h;
-
- if (sbi->s_mb_history == NULL)
- return;
-
- if (!(ac->ac_op & sbi->s_mb_history_filter))
- return;
-
- h.op = ac->ac_op;
- h.pid = current->pid;
- h.ino = ac->ac_inode ? ac->ac_inode->i_ino : 0;
- h.orig = ac->ac_o_ex;
- h.result = ac->ac_b_ex;
- h.flags = ac->ac_flags;
- h.found = ac->ac_found;
- h.groups = ac->ac_groups_scanned;
- h.cr = ac->ac_criteria;
- h.tail = ac->ac_tail;
- h.buddy = ac->ac_buddy;
- h.merged = 0;
- if (ac->ac_op == EXT4_MB_HISTORY_ALLOC) {
- if (ac->ac_g_ex.fe_start == ac->ac_b_ex.fe_start &&
- ac->ac_g_ex.fe_group == ac->ac_b_ex.fe_group)
- h.merged = 1;
- h.goal = ac->ac_g_ex;
- h.result = ac->ac_f_ex;
- }
-
- spin_lock(&sbi->s_mb_history_lock);
- memcpy(sbi->s_mb_history + sbi->s_mb_history_cur, &h, sizeof(h));
- if (++sbi->s_mb_history_cur >= sbi->s_mb_history_max)
- sbi->s_mb_history_cur = 0;
- spin_unlock(&sbi->s_mb_history_lock);
-}
-
-#else
-#define ext4_mb_history_release(sb)
-#define ext4_mb_history_init(sb)
-#endif
-
/* Create and initialize ext4_group_info data for the given group. */
int ext4_mb_add_groupinfo(struct super_block *sb, ext4_group_t group,
sbi->s_mb_stats = MB_DEFAULT_STATS;
sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
- sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT;
sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC;
sbi->s_locality_groups = alloc_percpu(struct ext4_locality_group);
spin_lock_init(&lg->lg_prealloc_lock);
}
- ext4_mb_history_init(sb);
+ if (sbi->s_proc)
+ proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
+ &ext4_mb_seq_groups_fops, sb);
if (sbi->s_journal)
sbi->s_journal->j_commit_callback = release_blocks_on_commit;
-
- printk(KERN_INFO "EXT4-fs: mballoc enabled\n");
return 0;
}
}
free_percpu(sbi->s_locality_groups);
- ext4_mb_history_release(sb);
+ if (sbi->s_proc)
+ remove_proc_entry("mb_groups", sbi->s_proc);
return 0;
}
atomic_inc(&sbi->s_bal_breaks);
}
- ext4_mb_store_history(ac);
+ if (ac->ac_op == EXT4_MB_HISTORY_ALLOC)
+ trace_ext4_mballoc_alloc(ac);
+ else
+ trace_ext4_mballoc_prealloc(ac);
}
/*
if (ac) {
ac->ac_sb = sb;
ac->ac_inode = pa->pa_inode;
- ac->ac_op = EXT4_MB_HISTORY_DISCARD;
}
while (bit < end) {
ac->ac_b_ex.fe_start = bit;
ac->ac_b_ex.fe_len = next - bit;
ac->ac_b_ex.fe_logical = 0;
- ext4_mb_store_history(ac);
+ trace_ext4_mballoc_discard(ac);
}
trace_ext4_mb_release_inode_pa(ac, pa, grp_blk_start + bit,
ext4_group_t group;
ext4_grpblk_t bit;
- if (ac)
- ac->ac_op = EXT4_MB_HISTORY_DISCARD;
-
trace_ext4_mb_release_group_pa(ac, pa);
BUG_ON(pa->pa_deleted == 0);
ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
ac->ac_b_ex.fe_start = bit;
ac->ac_b_ex.fe_len = pa->pa_len;
ac->ac_b_ex.fe_logical = 0;
- ext4_mb_store_history(ac);
+ trace_ext4_mballoc_discard(ac);
}
return 0;
size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len;
isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1)
>> bsbits;
- size = max(size, isize);
if ((size == isize) &&
!ext4_fs_is_busy(sbi) &&
}
/* don't use group allocation for large files */
+ size = max(size, isize);
if (size >= sbi->s_mb_stream_request) {
ac->ac_flags |= EXT4_MB_STREAM_ALLOC;
return;
ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
if (ac) {
- ac->ac_op = EXT4_MB_HISTORY_FREE;
ac->ac_inode = inode;
ac->ac_sb = sb;
}
ac->ac_b_ex.fe_group = block_group;
ac->ac_b_ex.fe_start = bit;
ac->ac_b_ex.fe_len = count;
- ext4_mb_store_history(ac);
+ trace_ext4_mballoc_free(ac);
}
err = ext4_mb_load_buddy(sb, block_group, &e4b);
#define mb_debug(n, fmt, a...)
#endif
-/*
- * with EXT4_MB_HISTORY mballoc stores last N allocations in memory
- * and you can monitor it in /proc/fs/ext4/<dev>/mb_history
- */
-#define EXT4_MB_HISTORY
#define EXT4_MB_HISTORY_ALLOC 1 /* allocation */
#define EXT4_MB_HISTORY_PREALLOC 2 /* preallocated blocks used */
-#define EXT4_MB_HISTORY_DISCARD 4 /* preallocation discarded */
-#define EXT4_MB_HISTORY_FREE 8 /* free */
-
-#define EXT4_MB_HISTORY_DEFAULT (EXT4_MB_HISTORY_ALLOC | \
- EXT4_MB_HISTORY_PREALLOC)
/*
* How long mballoc can look for a best extent (in found extents)
* with 'ext4_mb_stats' allocator will collect stats that will be
* shown at umount. The collecting costs though!
*/
-#define MB_DEFAULT_STATS 1
+#define MB_DEFAULT_STATS 0
/*
* files smaller than MB_DEFAULT_STREAM_THRESHOLD are served
#define AC_STATUS_FOUND 2
#define AC_STATUS_BREAK 3
-struct ext4_mb_history {
- struct ext4_free_extent orig; /* orig allocation */
- struct ext4_free_extent goal; /* goal allocation */
- struct ext4_free_extent result; /* result allocation */
- unsigned pid;
- unsigned ino;
- __u16 found; /* how many extents have been found */
- __u16 groups; /* how many groups have been scanned */
- __u16 tail; /* what tail broke some buddy */
- __u16 buddy; /* buddy the tail ^^^ broke */
- __u16 flags;
- __u8 cr:3; /* which phase the result extent was found at */
- __u8 op:4;
- __u8 merged:1;
-};
-
struct ext4_buddy {
struct page *bd_buddy_page;
void *bd_buddy;
#define EXT4_MB_BITMAP(e4b) ((e4b)->bd_bitmap)
#define EXT4_MB_BUDDY(e4b) ((e4b)->bd_buddy)
-#ifndef EXT4_MB_HISTORY
-static inline void ext4_mb_store_history(struct ext4_allocation_context *ac)
-{
- return;
-}
-#endif
-
#define in_range(b, first, len) ((b) >= (first) && (b) <= (first) + (len) - 1)
static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb,
goto err_out;
}
}
- retval = ext4_ext_insert_extent(handle, inode, path, &newext);
+ retval = ext4_ext_insert_extent(handle, inode, path, &newext, 0);
err_out:
if (path) {
ext4_ext_drop_refs(path);
goto out;
if (ext4_ext_insert_extent(handle, orig_inode,
- orig_path, new_ext))
+ orig_path, new_ext, 0))
goto out;
}
goto out;
if (ext4_ext_insert_extent(handle, orig_inode,
- orig_path, end_ext))
+ orig_path, end_ext, 0))
goto out;
}
out:
return -EINVAL;
}
- /* orig and donor should be different file */
- if (orig_inode->i_ino == donor_inode->i_ino) {
- ext4_debug("ext4 move extent: The argument files should not "
- "be same file [ino:orig %lu, donor %lu]\n",
- orig_inode->i_ino, donor_inode->i_ino);
- return -EINVAL;
- }
-
/* Ext4 move extent supports only extent based file */
if (!(EXT4_I(orig_inode)->i_flags & EXT4_EXTENTS_FL)) {
ext4_debug("ext4 move extent: orig file is not extents "
int block_len_in_page;
int uninit;
+ /* orig and donor should be different file */
+ if (orig_inode->i_ino == donor_inode->i_ino) {
+ ext4_debug("ext4 move extent: The argument files should not "
+ "be same file [ino:orig %lu, donor %lu]\n",
+ orig_inode->i_ino, donor_inode->i_ino);
+ return -EINVAL;
+ }
+
/* protect orig and donor against a truncate */
ret1 = mext_inode_double_lock(orig_inode, donor_inode);
if (ret1 < 0)
struct ext4_iloc iloc;
int err = 0;
- if (!ext4_handle_valid(handle))
+ /* ext4_handle_valid() assumes a valid handle_t pointer */
+ if (handle && !ext4_handle_valid(handle))
return 0;
mutex_lock(&EXT4_SB(inode->i_sb)->s_orphan_lock);
#define CREATE_TRACE_POINTS
#include <trace/events/ext4.h>
-static int default_mb_history_length = 1000;
-
-module_param_named(default_mb_history_length, default_mb_history_length,
- int, 0644);
-MODULE_PARM_DESC(default_mb_history_length,
- "Default number of entries saved for mb_history");
-
struct proc_dir_entry *ext4_proc_root;
static struct kset *ext4_kset;
bg->bg_itable_unused_hi = cpu_to_le16(count >> 16);
}
+
+/* Just increment the non-pointer handle value */
+static handle_t *ext4_get_nojournal(void)
+{
+ handle_t *handle = current->journal_info;
+ unsigned long ref_cnt = (unsigned long)handle;
+
+ BUG_ON(ref_cnt >= EXT4_NOJOURNAL_MAX_REF_COUNT);
+
+ ref_cnt++;
+ handle = (handle_t *)ref_cnt;
+
+ current->journal_info = handle;
+ return handle;
+}
+
+
+/* Decrement the non-pointer handle value */
+static void ext4_put_nojournal(handle_t *handle)
+{
+ unsigned long ref_cnt = (unsigned long)handle;
+
+ BUG_ON(ref_cnt == 0);
+
+ ref_cnt--;
+ handle = (handle_t *)ref_cnt;
+
+ current->journal_info = handle;
+}
+
/*
* Wrappers for jbd2_journal_start/end.
*
}
return jbd2_journal_start(journal, nblocks);
}
- /*
- * We're not journaling, return the appropriate indication.
- */
- current->journal_info = EXT4_NOJOURNAL_HANDLE;
- return current->journal_info;
+ return ext4_get_nojournal();
}
/*
int rc;
if (!ext4_handle_valid(handle)) {
- /*
- * Do this here since we don't call jbd2_journal_stop() in
- * no-journal mode.
- */
- current->journal_info = NULL;
+ ext4_put_nojournal(handle);
return 0;
}
sb = handle->h_transaction->t_journal->j_private;
struct ext4_super_block *es = sbi->s_es;
int i, err;
+ flush_workqueue(sbi->dio_unwritten_wq);
+ destroy_workqueue(sbi->dio_unwritten_wq);
+
lock_super(sb);
lock_kernel();
if (sb->s_dirt)
ei->i_allocated_meta_blocks = 0;
ei->i_delalloc_reserved_flag = 0;
spin_lock_init(&(ei->i_block_reservation_lock));
+ INIT_LIST_HEAD(&ei->i_aio_dio_complete_list);
+ ei->cur_aio_dio = NULL;
return &ei->vfs_inode;
}
Opt_journal_update, Opt_journal_dev,
Opt_journal_checksum, Opt_journal_async_commit,
Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
- Opt_data_err_abort, Opt_data_err_ignore, Opt_mb_history_length,
+ Opt_data_err_abort, Opt_data_err_ignore,
Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, Opt_resize,
{Opt_data_writeback, "data=writeback"},
{Opt_data_err_abort, "data_err=abort"},
{Opt_data_err_ignore, "data_err=ignore"},
- {Opt_mb_history_length, "mb_history_length=%u"},
{Opt_offusrjquota, "usrjquota="},
{Opt_usrjquota, "usrjquota=%s"},
{Opt_offgrpjquota, "grpjquota="},
*journal_devnum = option;
break;
case Opt_journal_checksum:
- break; /* Kept for backwards compatibility */
+ set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM);
+ break;
case Opt_journal_async_commit:
set_opt(sbi->s_mount_opt, JOURNAL_ASYNC_COMMIT);
+ set_opt(sbi->s_mount_opt, JOURNAL_CHECKSUM);
break;
case Opt_noload:
set_opt(sbi->s_mount_opt, NOLOAD);
case Opt_data_err_ignore:
clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
break;
- case Opt_mb_history_length:
- if (match_int(&args[0], &option))
- return 0;
- if (option < 0)
- return 0;
- sbi->s_mb_history_max = option;
- break;
#ifdef CONFIG_QUOTA
case Opt_usrjquota:
qtype = USRQUOTA;
EXT4_INODES_PER_GROUP(sb),
sbi->s_mount_opt);
- if (EXT4_SB(sb)->s_journal) {
- ext4_msg(sb, KERN_INFO, "%s journal on %s",
- EXT4_SB(sb)->s_journal->j_inode ? "internal" :
- "external", EXT4_SB(sb)->s_journal->j_devname);
- } else {
- ext4_msg(sb, KERN_INFO, "no journal");
- }
return res;
}
EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
+EXT4_RW_ATTR_SBI_UI(max_writeback_mb_bump, s_max_writeback_mb_bump);
static struct attribute *ext4_attrs[] = {
ATTR_LIST(delayed_allocation_blocks),
ATTR_LIST(mb_order2_req),
ATTR_LIST(mb_stream_req),
ATTR_LIST(mb_group_prealloc),
+ ATTR_LIST(max_writeback_mb_bump),
NULL,
};
sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ;
sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
- sbi->s_mb_history_max = default_mb_history_length;
set_opt(sbi->s_mount_opt, BARRIER);
}
sbi->s_stripe = ext4_get_stripe_size(sbi);
+ sbi->s_max_writeback_mb_bump = 128;
/*
* set up enough so that it can read an inode
goto failed_mount4;
}
- jbd2_journal_set_features(sbi->s_journal,
- JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0);
- if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
- jbd2_journal_set_features(sbi->s_journal, 0, 0,
+ if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) {
+ jbd2_journal_set_features(sbi->s_journal,
+ JBD2_FEATURE_COMPAT_CHECKSUM, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
- else
+ } else if (test_opt(sb, JOURNAL_CHECKSUM)) {
+ jbd2_journal_set_features(sbi->s_journal,
+ JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0);
jbd2_journal_clear_features(sbi->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
+ } else {
+ jbd2_journal_clear_features(sbi->s_journal,
+ JBD2_FEATURE_COMPAT_CHECKSUM, 0,
+ JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
+ }
/* We have now updated the journal if required, so we can
* validate the data journaling mode. */
clear_opt(sbi->s_mount_opt, NOBH);
}
}
+ EXT4_SB(sb)->dio_unwritten_wq = create_workqueue("ext4-dio-unwritten");
+ if (!EXT4_SB(sb)->dio_unwritten_wq) {
+ printk(KERN_ERR "EXT4-fs: failed to create DIO workqueue\n");
+ goto failed_mount_wq;
+ }
+
/*
* The jbd2_journal_load will have done any necessary log recovery,
* so we can safely mount the rest of the filesystem now.
"available");
}
- if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
+ if (test_opt(sb, DELALLOC) &&
+ (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)) {
ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - "
"requested data journaling mode");
clear_opt(sbi->s_mount_opt, DELALLOC);
- } else if (test_opt(sb, DELALLOC))
- ext4_msg(sb, KERN_INFO, "delayed allocation enabled");
+ }
err = ext4_setup_system_zone(sb);
if (err) {
failed_mount4:
ext4_msg(sb, KERN_ERR, "mount failed");
+ destroy_workqueue(EXT4_SB(sb)->dio_unwritten_wq);
+failed_mount_wq:
ext4_release_system_zone(sb);
if (sbi->s_journal) {
jbd2_journal_destroy(sbi->s_journal);
return -EINVAL;
}
- if (journal->j_flags & JBD2_BARRIER)
- ext4_msg(sb, KERN_INFO, "barriers enabled");
- else
+ if (!(journal->j_flags & JBD2_BARRIER))
ext4_msg(sb, KERN_INFO, "barriers disabled");
if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
{
int ret = 0;
tid_t target;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
trace_ext4_sync_fs(sb, wait);
- if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) {
+ flush_workqueue(sbi->dio_unwritten_wq);
+ if (jbd2_journal_start_commit(sbi->s_journal, &target)) {
if (wait)
- jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target);
+ jbd2_log_wait_commit(sbi->s_journal, target);
}
return ret;
}
.fs_flags = FS_REQUIRES_DEV,
};
-#ifdef CONFIG_EXT4DEV_COMPAT
-static int ext4dev_get_sb(struct file_system_type *fs_type, int flags,
- const char *dev_name, void *data,struct vfsmount *mnt)
-{
- printk(KERN_WARNING "EXT4-fs (%s): Update your userspace programs "
- "to mount using ext4\n", dev_name);
- printk(KERN_WARNING "EXT4-fs (%s): ext4dev backwards compatibility "
- "will go away by 2.6.31\n", dev_name);
- return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
-}
-
-static struct file_system_type ext4dev_fs_type = {
- .owner = THIS_MODULE,
- .name = "ext4dev",
- .get_sb = ext4dev_get_sb,
- .kill_sb = kill_block_super,
- .fs_flags = FS_REQUIRES_DEV,
-};
-MODULE_ALIAS("ext4dev");
-#endif
-
static int __init init_ext4_fs(void)
{
int err;
err = register_filesystem(&ext4_fs_type);
if (err)
goto out;
-#ifdef CONFIG_EXT4DEV_COMPAT
- err = register_filesystem(&ext4dev_fs_type);
- if (err) {
- unregister_filesystem(&ext4_fs_type);
- goto out;
- }
-#endif
return 0;
out:
destroy_inodecache();
static void __exit exit_ext4_fs(void)
{
unregister_filesystem(&ext4_fs_type);
-#ifdef CONFIG_EXT4DEV_COMPAT
- unregister_filesystem(&ext4dev_fs_type);
-#endif
destroy_inodecache();
exit_ext4_xattr();
exit_ext4_mballoc();
/* fat/misc.c */
extern void fat_fs_error(struct super_block *s, const char *fmt, ...)
__attribute__ ((format (printf, 2, 3))) __cold;
-extern void fat_clusters_flush(struct super_block *sb);
+extern int fat_clusters_flush(struct super_block *sb);
extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts,
__le16 __time, __le16 __date, u8 time_cs);
static int fat_sync_fs(struct super_block *sb, int wait)
{
- lock_super(sb);
- fat_clusters_flush(sb);
- sb->s_dirt = 0;
- unlock_super(sb);
+ int err = 0;
- return 0;
+ if (sb->s_dirt) {
+ lock_super(sb);
+ sb->s_dirt = 0;
+ err = fat_clusters_flush(sb);
+ unlock_super(sb);
+ }
+
+ return err;
}
static void fat_put_super(struct super_block *sb)
iput(sbi->fat_inode);
- if (sbi->nls_disk) {
- unload_nls(sbi->nls_disk);
- sbi->nls_disk = NULL;
- sbi->options.codepage = fat_default_codepage;
- }
- if (sbi->nls_io) {
- unload_nls(sbi->nls_io);
- sbi->nls_io = NULL;
- }
- if (sbi->options.iocharset != fat_default_iocharset) {
+ unload_nls(sbi->nls_disk);
+ unload_nls(sbi->nls_io);
+
+ if (sbi->options.iocharset != fat_default_iocharset)
kfree(sbi->options.iocharset);
- sbi->options.iocharset = fat_default_iocharset;
- }
sb->s_fs_info = NULL;
kfree(sbi);
seq_puts(m, ",shortname=mixed");
break;
case VFAT_SFN_DISPLAY_LOWER | VFAT_SFN_CREATE_WIN95:
- /* seq_puts(m, ",shortname=lower"); */
+ seq_puts(m, ",shortname=lower");
break;
default:
seq_puts(m, ",shortname=unknown");
opts->codepage = fat_default_codepage;
opts->iocharset = fat_default_iocharset;
if (is_vfat) {
- opts->shortname = VFAT_SFN_DISPLAY_LOWER|VFAT_SFN_CREATE_WIN95;
+ opts->shortname = VFAT_SFN_DISPLAY_WINNT|VFAT_SFN_CREATE_WIN95;
opts->rodir = 0;
} else {
opts->shortname = 0;
/* Flushes the number of free clusters on FAT32 */
/* XXX: Need to write one per FSINFO block. Currently only writes 1 */
-void fat_clusters_flush(struct super_block *sb)
+int fat_clusters_flush(struct super_block *sb)
{
struct msdos_sb_info *sbi = MSDOS_SB(sb);
struct buffer_head *bh;
struct fat_boot_fsinfo *fsinfo;
if (sbi->fat_bits != 32)
- return;
+ return 0;
bh = sb_bread(sb, sbi->fsinfo_sector);
if (bh == NULL) {
printk(KERN_ERR "FAT: bread failed in fat_clusters_flush\n");
- return;
+ return -EIO;
}
fsinfo = (struct fat_boot_fsinfo *)bh->b_data;
mark_buffer_dirty(bh);
}
brelse(bh);
+
+ return 0;
}
/*
int charlen;
if (utf8) {
- int name_len = strlen(name);
-
- *outlen = utf8s_to_utf16s(name, PATH_MAX, (wchar_t *) outname);
-
- /*
- * We stripped '.'s before and set len appropriately,
- * but utf8s_to_utf16s doesn't care about len
- */
- *outlen -= (name_len - len);
-
- if (*outlen > 255)
+ *outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname);
+ if (*outlen < 0)
+ return *outlen;
+ else if (*outlen > 255)
return -ENAMETOOLONG;
op = &outname[*outlen * sizeof(wchar_t)];
return pid;
}
+static int f_setown_ex(struct file *filp, unsigned long arg)
+{
+ struct f_owner_ex * __user owner_p = (void * __user)arg;
+ struct f_owner_ex owner;
+ struct pid *pid;
+ int type;
+ int ret;
+
+ ret = copy_from_user(&owner, owner_p, sizeof(owner));
+ if (ret)
+ return ret;
+
+ switch (owner.type) {
+ case F_OWNER_TID:
+ type = PIDTYPE_MAX;
+ break;
+
+ case F_OWNER_PID:
+ type = PIDTYPE_PID;
+ break;
+
+ case F_OWNER_GID:
+ type = PIDTYPE_PGID;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ rcu_read_lock();
+ pid = find_vpid(owner.pid);
+ if (owner.pid && !pid)
+ ret = -ESRCH;
+ else
+ ret = __f_setown(filp, pid, type, 1);
+ rcu_read_unlock();
+
+ return ret;
+}
+
+static int f_getown_ex(struct file *filp, unsigned long arg)
+{
+ struct f_owner_ex * __user owner_p = (void * __user)arg;
+ struct f_owner_ex owner;
+ int ret = 0;
+
+ read_lock(&filp->f_owner.lock);
+ owner.pid = pid_vnr(filp->f_owner.pid);
+ switch (filp->f_owner.pid_type) {
+ case PIDTYPE_MAX:
+ owner.type = F_OWNER_TID;
+ break;
+
+ case PIDTYPE_PID:
+ owner.type = F_OWNER_PID;
+ break;
+
+ case PIDTYPE_PGID:
+ owner.type = F_OWNER_GID;
+ break;
+
+ default:
+ WARN_ON(1);
+ ret = -EINVAL;
+ break;
+ }
+ read_unlock(&filp->f_owner.lock);
+
+ if (!ret)
+ ret = copy_to_user(owner_p, &owner, sizeof(owner));
+ return ret;
+}
+
static long do_fcntl(int fd, unsigned int cmd, unsigned long arg,
struct file *filp)
{
case F_SETOWN:
err = f_setown(filp, arg, 1);
break;
+ case F_GETOWN_EX:
+ err = f_getown_ex(filp, arg);
+ break;
+ case F_SETOWN_EX:
+ err = f_setown_ex(filp, arg);
+ break;
case F_GETSIG:
err = filp->f_owner.signum;
break;
static void send_sigio_to_task(struct task_struct *p,
struct fown_struct *fown,
- int fd,
- int reason)
+ int fd, int reason, int group)
{
/*
* F_SETSIG can change ->signum lockless in parallel, make
else
si.si_band = band_table[reason - POLL_IN];
si.si_fd = fd;
- if (!group_send_sig_info(signum, &si, p))
+ if (!do_send_sig_info(signum, &si, p, group))
break;
/* fall-through: fall back on the old plain SIGIO signal */
case 0:
- group_send_sig_info(SIGIO, SEND_SIG_PRIV, p);
+ do_send_sig_info(SIGIO, SEND_SIG_PRIV, p, group);
}
}
struct task_struct *p;
enum pid_type type;
struct pid *pid;
+ int group = 1;
read_lock(&fown->lock);
+
type = fown->pid_type;
+ if (type == PIDTYPE_MAX) {
+ group = 0;
+ type = PIDTYPE_PID;
+ }
+
pid = fown->pid;
if (!pid)
goto out_unlock_fown;
read_lock(&tasklist_lock);
do_each_pid_task(pid, type, p) {
- send_sigio_to_task(p, fown, fd, band);
+ send_sigio_to_task(p, fown, fd, band, group);
} while_each_pid_task(pid, type, p);
read_unlock(&tasklist_lock);
out_unlock_fown:
}
static void send_sigurg_to_task(struct task_struct *p,
- struct fown_struct *fown)
+ struct fown_struct *fown, int group)
{
if (sigio_perm(p, fown, SIGURG))
- group_send_sig_info(SIGURG, SEND_SIG_PRIV, p);
+ do_send_sig_info(SIGURG, SEND_SIG_PRIV, p, group);
}
int send_sigurg(struct fown_struct *fown)
struct task_struct *p;
enum pid_type type;
struct pid *pid;
+ int group = 1;
int ret = 0;
read_lock(&fown->lock);
+
type = fown->pid_type;
+ if (type == PIDTYPE_MAX) {
+ group = 0;
+ type = PIDTYPE_PID;
+ }
+
pid = fown->pid;
if (!pid)
goto out_unlock_fown;
read_lock(&tasklist_lock);
do_each_pid_task(pid, type, p) {
- send_sigurg_to_task(p, fown);
+ send_sigurg_to_task(p, fown, group);
} while_each_pid_task(pid, type, p);
read_unlock(&tasklist_lock);
out_unlock_fown:
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/time.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/vmalloc.h>
#include <linux/file.h>
* Handle nr_files sysctl
*/
#if defined(CONFIG_SYSCTL) && defined(CONFIG_PROC_FS)
-int proc_nr_files(ctl_table *table, int write, struct file *filp,
+int proc_nr_files(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
files_stat.nr_files = get_nr_files();
- return proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec(table, write, buffer, lenp, ppos);
}
#else
-int proc_nr_files(ctl_table *table, int write, struct file *filp,
+int proc_nr_files(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
long nr_pages;
struct super_block *sb;
enum writeback_sync_modes sync_mode;
- int for_kupdate;
- int range_cyclic;
+ int for_kupdate:1;
+ int range_cyclic:1;
+ int for_background:1;
};
/*
* completion. Caller need not hold sb s_umount semaphore.
*
*/
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
+void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+ long nr_pages)
{
struct wb_writeback_args args = {
+ .sb = sb,
.sync_mode = WB_SYNC_NONE,
.nr_pages = nr_pages,
.range_cyclic = 1,
};
+ /*
+ * We treat @nr_pages=0 as the special case to do background writeback,
+ * ie. to sync pages until the background dirty threshold is reached.
+ */
+ if (!nr_pages) {
+ args.nr_pages = LONG_MAX;
+ args.for_background = 1;
+ }
+
bdi_alloc_queue_work(bdi, &args);
}
* For inodes being constantly redirtied, dirtied_when can get stuck.
* It _appears_ to be in the future, but is actually in distant past.
* This test is necessary to prevent such wrapped-around relative times
- * from permanently stopping the whole pdflush writeback.
+ * from permanently stopping the whole bdi writeback.
*/
ret = ret && time_before_eq(inode->dirtied_when, jiffies);
#endif
struct list_head *dispatch_queue,
unsigned long *older_than_this)
{
+ LIST_HEAD(tmp);
+ struct list_head *pos, *node;
+ struct super_block *sb = NULL;
+ struct inode *inode;
+ int do_sb_sort = 0;
+
while (!list_empty(delaying_queue)) {
- struct inode *inode = list_entry(delaying_queue->prev,
- struct inode, i_list);
+ inode = list_entry(delaying_queue->prev, struct inode, i_list);
if (older_than_this &&
inode_dirtied_after(inode, *older_than_this))
break;
- list_move(&inode->i_list, dispatch_queue);
+ if (sb && sb != inode->i_sb)
+ do_sb_sort = 1;
+ sb = inode->i_sb;
+ list_move(&inode->i_list, &tmp);
+ }
+
+ /* just one sb in list, splice to dispatch_queue and we're done */
+ if (!do_sb_sort) {
+ list_splice(&tmp, dispatch_queue);
+ return;
+ }
+
+ /* Move inodes from one superblock together */
+ while (!list_empty(&tmp)) {
+ inode = list_entry(tmp.prev, struct inode, i_list);
+ sb = inode->i_sb;
+ list_for_each_prev_safe(pos, node, &tmp) {
+ inode = list_entry(pos, struct inode, i_list);
+ if (inode->i_sb == sb)
+ list_move(&inode->i_list, dispatch_queue);
+ }
}
}
spin_lock(&inode_lock);
inode->i_state &= ~I_SYNC;
if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
- if (!(inode->i_state & I_DIRTY) &&
- mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+ if ((inode->i_state & I_DIRTY_PAGES) && wbc->for_kupdate) {
+ /*
+ * More pages get dirtied by a fast dirtier.
+ */
+ goto select_queue;
+ } else if (inode->i_state & I_DIRTY) {
+ /*
+ * At least XFS will redirty the inode during the
+ * writeback (delalloc) and on io completion (isize).
+ */
+ redirty_tail(inode);
+ } else if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
/*
* We didn't write back all the pages. nfs_writepages()
* sometimes bales out without doing anything. Redirty
* soon as the queue becomes uncongested.
*/
inode->i_state |= I_DIRTY_PAGES;
+select_queue:
if (wbc->nr_to_write <= 0) {
/*
* slice used up: queue for next turn
inode->i_state |= I_DIRTY_PAGES;
redirty_tail(inode);
}
- } else if (inode->i_state & I_DIRTY) {
- /*
- * Someone redirtied the inode while were writing back
- * the pages.
- */
- redirty_tail(inode);
} else if (atomic_read(&inode->i_count)) {
/*
* The inode is clean, inuse
return ret;
}
+static void unpin_sb_for_writeback(struct super_block **psb)
+{
+ struct super_block *sb = *psb;
+
+ if (sb) {
+ up_read(&sb->s_umount);
+ put_super(sb);
+ *psb = NULL;
+ }
+}
+
/*
* For WB_SYNC_NONE writeback, the caller does not have the sb pinned
* before calling writeback. So make sure that we do pin it, so it doesn't
* 1 if we failed.
*/
static int pin_sb_for_writeback(struct writeback_control *wbc,
- struct inode *inode)
+ struct inode *inode, struct super_block **psb)
{
struct super_block *sb = inode->i_sb;
+ /*
+ * If this sb is already pinned, nothing more to do. If not and
+ * *psb is non-NULL, unpin the old one first
+ */
+ if (sb == *psb)
+ return 0;
+ else if (*psb)
+ unpin_sb_for_writeback(psb);
+
/*
* Caller must already hold the ref for this
*/
if (down_read_trylock(&sb->s_umount)) {
if (sb->s_root) {
spin_unlock(&sb_lock);
- return 0;
+ goto pinned;
}
/*
* umounted, drop rwsem again and fall through to failure
sb->s_count--;
spin_unlock(&sb_lock);
return 1;
-}
-
-static void unpin_sb_for_writeback(struct writeback_control *wbc,
- struct inode *inode)
-{
- struct super_block *sb = inode->i_sb;
-
- if (wbc->sync_mode == WB_SYNC_ALL)
- return;
-
- up_read(&sb->s_umount);
- put_super(sb);
+pinned:
+ *psb = sb;
+ return 0;
}
static void writeback_inodes_wb(struct bdi_writeback *wb,
struct writeback_control *wbc)
{
- struct super_block *sb = wbc->sb;
+ struct super_block *sb = wbc->sb, *pin_sb = NULL;
const int is_blkdev_sb = sb_is_blkdev_sb(sb);
const unsigned long start = jiffies; /* livelock avoidance */
if (inode_dirtied_after(inode, start))
break;
- if (pin_sb_for_writeback(wbc, inode)) {
+ if (pin_sb_for_writeback(wbc, inode, &pin_sb)) {
requeue_io(inode);
continue;
}
__iget(inode);
pages_skipped = wbc->pages_skipped;
writeback_single_inode(inode, wbc);
- unpin_sb_for_writeback(wbc, inode);
if (wbc->pages_skipped != pages_skipped) {
/*
* writeback is not making progress due to locked
wbc->more_io = 1;
}
+ unpin_sb_for_writeback(&pin_sb);
+
spin_unlock(&inode_lock);
/* Leave any unwritten inodes on b_io */
}
};
unsigned long oldest_jif;
long wrote = 0;
+ struct inode *inode;
if (wbc.for_kupdate) {
wbc.older_than_this = &oldest_jif;
for (;;) {
/*
- * Don't flush anything for non-integrity writeback where
- * no nr_pages was given
+ * Stop writeback when nr_pages has been consumed
*/
- if (!args->for_kupdate && args->nr_pages <= 0 &&
- args->sync_mode == WB_SYNC_NONE)
+ if (args->nr_pages <= 0)
break;
/*
- * If no specific pages were given and this is just a
- * periodic background writeout and we are below the
- * background dirty threshold, don't do anything
+ * For background writeout, stop when we are below the
+ * background dirty threshold
*/
- if (args->for_kupdate && args->nr_pages <= 0 &&
- !over_bground_thresh())
+ if (args->for_background && !over_bground_thresh())
break;
wbc.more_io = 0;
wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
/*
- * If we ran out of stuff to write, bail unless more_io got set
+ * If we consumed everything, see if we have more
*/
- if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
- if (wbc.more_io && !wbc.for_kupdate)
- continue;
+ if (wbc.nr_to_write <= 0)
+ continue;
+ /*
+ * Didn't write everything and we don't have more IO, bail
+ */
+ if (!wbc.more_io)
break;
+ /*
+ * Did we write something? Try for more
+ */
+ if (wbc.nr_to_write < MAX_WRITEBACK_PAGES)
+ continue;
+ /*
+ * Nothing written. Wait for some inode to
+ * become available for writeback. Otherwise
+ * we'll just busyloop.
+ */
+ spin_lock(&inode_lock);
+ if (!list_empty(&wb->b_more_io)) {
+ inode = list_entry(wb->b_more_io.prev,
+ struct inode, i_list);
+ inode_wait_for_writeback(inode);
}
+ spin_unlock(&inode_lock);
}
return wrote;
* If older_than_this is non-NULL, then only write out inodes which
* had their first dirtying at a time earlier than *older_than_this.
*
- * If we're a pdlfush thread, then implement pdflush collision avoidance
- * against the entire list.
- *
* If `bdi' is non-zero then we're being asked to writeback a specific queue.
* This function assumes that the blockdev superblock's inodes are backed by
* a variety of queues, so all inodes are searched. For other superblocks,
nr_to_write = nr_dirty + nr_unstable +
(inodes_stat.nr_inodes - inodes_stat.nr_unused);
- bdi_writeback_all(sb, nr_to_write);
+ bdi_start_writeback(sb->s_bdi, sb, nr_to_write);
}
EXPORT_SYMBOL(writeback_inodes_sb);
return 0;
if (attr->ia_valid & ATTR_SIZE) {
- unsigned long limit;
- if (IS_SWAPFILE(inode))
- return -ETXTBSY;
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && attr->ia_size > (loff_t) limit) {
- send_sig(SIGXFSZ, current, 0);
- return -EFBIG;
- }
+ err = inode_newsize_ok(inode, attr->ia_size);
+ if (err)
+ return err;
is_truncate = true;
}
* FUSE_NOWRITE, otherwise fuse_launder_page() would deadlock.
*/
if (S_ISREG(inode->i_mode) && oldsize != outarg.attr.size) {
- if (outarg.attr.size < oldsize)
- fuse_truncate(inode->i_mapping, outarg.attr.size);
+ truncate_pagecache(inode, oldsize, outarg.attr.size);
invalidate_inode_pages2(inode->i_mapping);
}
return 0;
}
-static struct vm_operations_struct fuse_file_vm_ops = {
+static const struct vm_operations_struct fuse_file_vm_ops = {
.close = fuse_vma_close,
.fault = filemap_fault,
.page_mkwrite = fuse_page_mkwrite,
void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
u64 attr_valid);
-void fuse_truncate(struct address_space *mapping, loff_t offset);
-
/**
* Initialize the client device
*/
return 0;
}
-void fuse_truncate(struct address_space *mapping, loff_t offset)
-{
- /* See vmtruncate() */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
-}
-
void fuse_change_attributes_common(struct inode *inode, struct fuse_attr *attr,
u64 attr_valid)
{
spin_unlock(&fc->lock);
if (S_ISREG(inode->i_mode) && oldsize != attr->size) {
- if (attr->size < oldsize)
- fuse_truncate(inode->i_mapping, attr->size);
+ truncate_pagecache(inode, oldsize, attr->size);
invalidate_inode_pages2(inode->i_mapping);
}
}
.direct_IO = gfs2_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations gfs2_ordered_aops = {
.direct_IO = gfs2_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
static const struct address_space_operations gfs2_jdata_aops = {
.invalidatepage = gfs2_invalidatepage,
.releasepage = gfs2_releasepage,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
void gfs2_set_aops(struct inode *inode)
return ret;
}
-static struct vm_operations_struct gfs2_vm_ops = {
+static const struct vm_operations_struct gfs2_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = gfs2_page_mkwrite,
};
#include <linux/completion.h>
#include <linux/buffer_head.h>
#include <linux/namei.h>
-#include <linux/utsname.h>
#include <linux/mm.h>
#include <linux/xattr.h>
#include <linux/posix_acl.h>
}
unlock_new_inode(tree->inode);
+ if (!HFS_I(tree->inode)->first_blocks) {
+ printk(KERN_ERR "hfs: invalid btree extent records (0 size).\n");
+ goto free_inode;
+ }
+
mapping = tree->inode->i_mapping;
page = read_mapping_page(mapping, 0, NULL);
if (IS_ERR(page))
brelse(HFS_SB(sb)->mdb_bh);
brelse(HFS_SB(sb)->alt_mdb_bh);
- if (HFS_SB(sb)->nls_io)
- unload_nls(HFS_SB(sb)->nls_io);
- if (HFS_SB(sb)->nls_disk)
- unload_nls(HFS_SB(sb)->nls_disk);
+ unload_nls(HFS_SB(sb)->nls_io);
+ unload_nls(HFS_SB(sb)->nls_disk);
free_pages((unsigned long)HFS_SB(sb)->bitmap, PAGE_SIZE < 8192 ? 1 : 0);
kfree(HFS_SB(sb));
iput(HFSPLUS_SB(sb).alloc_file);
iput(HFSPLUS_SB(sb).hidden_dir);
brelse(HFSPLUS_SB(sb).s_vhbh);
- if (HFSPLUS_SB(sb).nls)
- unload_nls(HFSPLUS_SB(sb).nls);
+ unload_nls(HFSPLUS_SB(sb).nls);
kfree(sb->s_fs_info);
sb->s_fs_info = NULL;
cleanup:
hfsplus_put_super(sb);
- if (nls)
- unload_nls(nls);
+ unload_nls(nls);
return err;
}
if (hfsplus_get_last_session(sb, &part_start, &part_size))
return -EINVAL;
+ if ((u64)part_start + part_size > 0x100000000ULL) {
+ pr_err("hfs: volumes larger than 2TB are not supported yet\n");
+ return -EINVAL;
+ }
while (1) {
bh = sb_bread512(sb, part_start + HFSPLUS_VOLHEAD_SECTOR, vhdr);
if (!bh)
static void hugetlbfs_forget_inode(struct inode *inode) __releases(inode_lock)
{
- struct super_block *sb = inode->i_sb;
-
- if (!hlist_unhashed(&inode->i_hash)) {
- if (!(inode->i_state & (I_DIRTY|I_SYNC)))
- list_move(&inode->i_list, &inode_unused);
- inodes_stat.nr_unused++;
- if (!sb || (sb->s_flags & MS_ACTIVE)) {
- spin_unlock(&inode_lock);
- return;
- }
- inode->i_state |= I_WILL_FREE;
- spin_unlock(&inode_lock);
- /*
- * write_inode_now is a noop as we set BDI_CAP_NO_WRITEBACK
- * in our backing_dev_info.
- */
- write_inode_now(inode, 1);
- spin_lock(&inode_lock);
- inode->i_state &= ~I_WILL_FREE;
- inodes_stat.nr_unused--;
- hlist_del_init(&inode->i_hash);
+ if (generic_detach_inode(inode)) {
+ truncate_hugepages(inode, 0);
+ clear_inode(inode);
+ destroy_inode(inode);
}
- list_del_init(&inode->i_list);
- list_del_init(&inode->i_sb_list);
- inode->i_state |= I_FREEING;
- inodes_stat.nr_inodes--;
- spin_unlock(&inode_lock);
- truncate_hugepages(inode, 0);
- clear_inode(inode);
- destroy_inode(inode);
}
static void hugetlbfs_drop_inode(struct inode *inode)
static struct vfsmount *hugetlbfs_vfsmount;
-static int can_do_hugetlb_shm(int creat_flags)
+static int can_do_hugetlb_shm(void)
{
- if (creat_flags != HUGETLB_SHMFS_INODE)
- return 0;
- if (capable(CAP_IPC_LOCK))
- return 1;
- if (in_group_p(sysctl_hugetlb_shm_group))
- return 1;
- return 0;
+ return capable(CAP_IPC_LOCK) || in_group_p(sysctl_hugetlb_shm_group);
}
struct file *hugetlb_file_setup(const char *name, size_t size, int acctflag,
if (!hugetlbfs_vfsmount)
return ERR_PTR(-ENOENT);
- if (!can_do_hugetlb_shm(creat_flags)) {
+ if (creat_flags == HUGETLB_SHMFS_INODE && !can_do_hugetlb_shm()) {
*user = current_user();
if (user_shm_lock(size, *user)) {
WARN_ONCE(1,
}
EXPORT_SYMBOL(generic_delete_inode);
-static void generic_forget_inode(struct inode *inode)
+/**
+ * generic_detach_inode - remove inode from inode lists
+ * @inode: inode to remove
+ *
+ * Remove inode from inode lists, write it if it's dirty. This is just an
+ * internal VFS helper exported for hugetlbfs. Do not use!
+ *
+ * Returns 1 if inode should be completely destroyed.
+ */
+int generic_detach_inode(struct inode *inode)
{
struct super_block *sb = inode->i_sb;
inodes_stat.nr_unused++;
if (sb->s_flags & MS_ACTIVE) {
spin_unlock(&inode_lock);
- return;
+ return 0;
}
WARN_ON(inode->i_state & I_NEW);
inode->i_state |= I_WILL_FREE;
inode->i_state |= I_FREEING;
inodes_stat.nr_inodes--;
spin_unlock(&inode_lock);
+ return 1;
+}
+EXPORT_SYMBOL_GPL(generic_detach_inode);
+
+static void generic_forget_inode(struct inode *inode)
+{
+ if (!generic_detach_inode(inode))
+ return;
if (inode->i_data.nrpages)
truncate_inode_pages(&inode->i_data, 0);
clear_inode(inode);
struct inode *inode = dentry->d_inode;
struct timespec now;
- if (mnt_want_write(mnt))
- return;
if (inode->i_flags & S_NOATIME)
- goto out;
+ return;
if (IS_NOATIME(inode))
- goto out;
+ return;
if ((inode->i_sb->s_flags & MS_NODIRATIME) && S_ISDIR(inode->i_mode))
- goto out;
+ return;
if (mnt->mnt_flags & MNT_NOATIME)
- goto out;
+ return;
if ((mnt->mnt_flags & MNT_NODIRATIME) && S_ISDIR(inode->i_mode))
- goto out;
+ return;
now = current_fs_time(inode->i_sb);
if (!relatime_need_update(mnt, inode, now))
- goto out;
+ return;
if (timespec_equal(&inode->i_atime, &now))
- goto out;
+ return;
+
+ if (mnt_want_write(mnt))
+ return;
inode->i_atime = now;
mark_inode_dirty_sync(inode);
-out:
mnt_drop_write(mnt);
}
EXPORT_SYMBOL(touch_atime);
{
struct inode *inode = file->f_path.dentry->d_inode;
struct timespec now;
- int sync_it = 0;
- int err;
+ enum { S_MTIME = 1, S_CTIME = 2, S_VERSION = 4 } sync_it = 0;
+ /* First try to exhaust all avenues to not sync */
if (IS_NOCMTIME(inode))
return;
- err = mnt_want_write_file(file);
- if (err)
- return;
-
now = current_fs_time(inode->i_sb);
- if (!timespec_equal(&inode->i_mtime, &now)) {
- inode->i_mtime = now;
- sync_it = 1;
- }
+ if (!timespec_equal(&inode->i_mtime, &now))
+ sync_it = S_MTIME;
- if (!timespec_equal(&inode->i_ctime, &now)) {
- inode->i_ctime = now;
- sync_it = 1;
- }
+ if (!timespec_equal(&inode->i_ctime, &now))
+ sync_it |= S_CTIME;
- if (IS_I_VERSION(inode)) {
- inode_inc_iversion(inode);
- sync_it = 1;
- }
+ if (IS_I_VERSION(inode))
+ sync_it |= S_VERSION;
+
+ if (!sync_it)
+ return;
- if (sync_it)
- mark_inode_dirty_sync(inode);
+ /* Finally allowed to write? Takes lock. */
+ if (mnt_want_write_file(file))
+ return;
+
+ /* Only change inode inside the lock region */
+ if (sync_it & S_VERSION)
+ inode_inc_iversion(inode);
+ if (sync_it & S_CTIME)
+ inode->i_ctime = now;
+ if (sync_it & S_MTIME)
+ inode->i_mtime = now;
+ mark_inode_dirty_sync(inode);
mnt_drop_write(file->f_path.mnt);
}
EXPORT_SYMBOL(file_update_time);
else if (S_ISSOCK(mode))
inode->i_fop = &bad_sock_fops;
else
- printk(KERN_DEBUG "init_special_inode: bogus i_mode (%o)\n",
- mode);
+ printk(KERN_DEBUG "init_special_inode: bogus i_mode (%o) for"
+ " inode %s:%lu\n", mode, inode->i_sb->s_id,
+ inode->i_ino);
}
EXPORT_SYMBOL(init_special_inode);
* namespace.c
*/
extern int copy_mount_options(const void __user *, unsigned long *);
+extern int copy_mount_string(const void __user *, char **);
extern void free_vfsmnt(struct vfsmount *);
extern struct vfsmount *alloc_vfsmnt(const char *);
static int fiemap_check_ranges(struct super_block *sb,
u64 start, u64 len, u64 *new_len)
{
+ u64 maxbytes = (u64) sb->s_maxbytes;
+
*new_len = len;
if (len == 0)
return -EINVAL;
- if (start > sb->s_maxbytes)
+ if (start > maxbytes)
return -EFBIG;
/*
* Shrink request scope to what the fs can actually handle.
*/
- if ((len > sb->s_maxbytes) ||
- (sb->s_maxbytes - len) < start)
- *new_len = sb->s_maxbytes - start;
+ if (len > maxbytes || (maxbytes - len) < start)
+ *new_len = maxbytes - start;
return 0;
}
#ifdef CONFIG_JOLIET
lock_kernel();
- if (sbi->s_nls_iocharset) {
- unload_nls(sbi->s_nls_iocharset);
- sbi->s_nls_iocharset = NULL;
- }
+ unload_nls(sbi->s_nls_iocharset);
unlock_kernel();
#endif
printk(KERN_WARNING "%s: get root inode failed\n", __func__);
out_no_inode:
#ifdef CONFIG_JOLIET
- if (sbi->s_nls_iocharset)
- unload_nls(sbi->s_nls_iocharset);
+ unload_nls(sbi->s_nls_iocharset);
#endif
goto out_freesbi;
out_no_read:
int __jbd2_journal_remove_checkpoint(struct journal_head *jh)
{
+ struct transaction_chp_stats_s *stats;
transaction_t *transaction;
journal_t *journal;
int ret = 0;
/* OK, that was the last buffer for the transaction: we can now
safely remove this transaction from the log */
+ stats = &transaction->t_chp_stats;
+ if (stats->cs_chp_time)
+ stats->cs_chp_time = jbd2_time_diff(stats->cs_chp_time,
+ jiffies);
+ trace_jbd2_checkpoint_stats(journal->j_fs_dev->bd_dev,
+ transaction->t_tid, stats);
__jbd2_journal_drop_transaction(journal, transaction);
kfree(transaction);
if (commit_transaction->t_synchronous_commit)
write_op = WRITE_SYNC_PLUG;
trace_jbd2_commit_locking(journal, commit_transaction);
- stats.u.run.rs_wait = commit_transaction->t_max_wait;
- stats.u.run.rs_locked = jiffies;
- stats.u.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
- stats.u.run.rs_locked);
+ stats.run.rs_wait = commit_transaction->t_max_wait;
+ stats.run.rs_locked = jiffies;
+ stats.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
+ stats.run.rs_locked);
spin_lock(&commit_transaction->t_handle_lock);
while (commit_transaction->t_updates) {
jbd2_journal_switch_revoke_table(journal);
trace_jbd2_commit_flushing(journal, commit_transaction);
- stats.u.run.rs_flushing = jiffies;
- stats.u.run.rs_locked = jbd2_time_diff(stats.u.run.rs_locked,
- stats.u.run.rs_flushing);
+ stats.run.rs_flushing = jiffies;
+ stats.run.rs_locked = jbd2_time_diff(stats.run.rs_locked,
+ stats.run.rs_flushing);
commit_transaction->t_state = T_FLUSH;
journal->j_committing_transaction = commit_transaction;
spin_unlock(&journal->j_state_lock);
trace_jbd2_commit_logging(journal, commit_transaction);
- stats.u.run.rs_logging = jiffies;
- stats.u.run.rs_flushing = jbd2_time_diff(stats.u.run.rs_flushing,
- stats.u.run.rs_logging);
- stats.u.run.rs_blocks = commit_transaction->t_outstanding_credits;
- stats.u.run.rs_blocks_logged = 0;
+ stats.run.rs_logging = jiffies;
+ stats.run.rs_flushing = jbd2_time_diff(stats.run.rs_flushing,
+ stats.run.rs_logging);
+ stats.run.rs_blocks = commit_transaction->t_outstanding_credits;
+ stats.run.rs_blocks_logged = 0;
J_ASSERT(commit_transaction->t_nr_buffers <=
commit_transaction->t_outstanding_credits);
submit_bh(write_op, bh);
}
cond_resched();
- stats.u.run.rs_blocks_logged += bufs;
+ stats.run.rs_blocks_logged += bufs;
/* Force a new descriptor to be generated next
time round the loop. */
J_ASSERT(commit_transaction->t_state == T_COMMIT);
commit_transaction->t_start = jiffies;
- stats.u.run.rs_logging = jbd2_time_diff(stats.u.run.rs_logging,
- commit_transaction->t_start);
+ stats.run.rs_logging = jbd2_time_diff(stats.run.rs_logging,
+ commit_transaction->t_start);
/*
- * File the transaction for history
+ * File the transaction statistics
*/
- stats.ts_type = JBD2_STATS_RUN;
stats.ts_tid = commit_transaction->t_tid;
- stats.u.run.rs_handle_count = commit_transaction->t_handle_count;
- spin_lock(&journal->j_history_lock);
- memcpy(journal->j_history + journal->j_history_cur, &stats,
- sizeof(stats));
- if (++journal->j_history_cur == journal->j_history_max)
- journal->j_history_cur = 0;
+ stats.run.rs_handle_count = commit_transaction->t_handle_count;
+ trace_jbd2_run_stats(journal->j_fs_dev->bd_dev,
+ commit_transaction->t_tid, &stats.run);
/*
* Calculate overall stats
*/
+ spin_lock(&journal->j_history_lock);
journal->j_stats.ts_tid++;
- journal->j_stats.u.run.rs_wait += stats.u.run.rs_wait;
- journal->j_stats.u.run.rs_running += stats.u.run.rs_running;
- journal->j_stats.u.run.rs_locked += stats.u.run.rs_locked;
- journal->j_stats.u.run.rs_flushing += stats.u.run.rs_flushing;
- journal->j_stats.u.run.rs_logging += stats.u.run.rs_logging;
- journal->j_stats.u.run.rs_handle_count += stats.u.run.rs_handle_count;
- journal->j_stats.u.run.rs_blocks += stats.u.run.rs_blocks;
- journal->j_stats.u.run.rs_blocks_logged += stats.u.run.rs_blocks_logged;
+ journal->j_stats.run.rs_wait += stats.run.rs_wait;
+ journal->j_stats.run.rs_running += stats.run.rs_running;
+ journal->j_stats.run.rs_locked += stats.run.rs_locked;
+ journal->j_stats.run.rs_flushing += stats.run.rs_flushing;
+ journal->j_stats.run.rs_logging += stats.run.rs_logging;
+ journal->j_stats.run.rs_handle_count += stats.run.rs_handle_count;
+ journal->j_stats.run.rs_blocks += stats.run.rs_blocks;
+ journal->j_stats.run.rs_blocks_logged += stats.run.rs_blocks_logged;
spin_unlock(&journal->j_history_lock);
commit_transaction->t_state = T_FINISHED;
journal->j_task = current;
wake_up(&journal->j_wait_done_commit);
- printk(KERN_INFO "kjournald2 starting: pid %d, dev %s, "
- "commit interval %ld seconds\n", current->pid,
- journal->j_devname, journal->j_commit_interval / HZ);
-
/*
* And now, wait forever for commit wakeup events.
*/
{
struct task_struct *t;
- t = kthread_run(kjournald2, journal, "kjournald2");
+ t = kthread_run(kjournald2, journal, "jbd2/%s",
+ journal->j_devname);
if (IS_ERR(t))
return PTR_ERR(t);
int max;
};
-static void *jbd2_history_skip_empty(struct jbd2_stats_proc_session *s,
- struct transaction_stats_s *ts,
- int first)
-{
- if (ts == s->stats + s->max)
- ts = s->stats;
- if (!first && ts == s->stats + s->start)
- return NULL;
- while (ts->ts_type == 0) {
- ts++;
- if (ts == s->stats + s->max)
- ts = s->stats;
- if (ts == s->stats + s->start)
- return NULL;
- }
- return ts;
-
-}
-
-static void *jbd2_seq_history_start(struct seq_file *seq, loff_t *pos)
-{
- struct jbd2_stats_proc_session *s = seq->private;
- struct transaction_stats_s *ts;
- int l = *pos;
-
- if (l == 0)
- return SEQ_START_TOKEN;
- ts = jbd2_history_skip_empty(s, s->stats + s->start, 1);
- if (!ts)
- return NULL;
- l--;
- while (l) {
- ts = jbd2_history_skip_empty(s, ++ts, 0);
- if (!ts)
- break;
- l--;
- }
- return ts;
-}
-
-static void *jbd2_seq_history_next(struct seq_file *seq, void *v, loff_t *pos)
-{
- struct jbd2_stats_proc_session *s = seq->private;
- struct transaction_stats_s *ts = v;
-
- ++*pos;
- if (v == SEQ_START_TOKEN)
- return jbd2_history_skip_empty(s, s->stats + s->start, 1);
- else
- return jbd2_history_skip_empty(s, ++ts, 0);
-}
-
-static int jbd2_seq_history_show(struct seq_file *seq, void *v)
-{
- struct transaction_stats_s *ts = v;
- if (v == SEQ_START_TOKEN) {
- seq_printf(seq, "%-4s %-5s %-5s %-5s %-5s %-5s %-5s %-6s %-5s "
- "%-5s %-5s %-5s %-5s %-5s\n", "R/C", "tid",
- "wait", "run", "lock", "flush", "log", "hndls",
- "block", "inlog", "ctime", "write", "drop",
- "close");
- return 0;
- }
- if (ts->ts_type == JBD2_STATS_RUN)
- seq_printf(seq, "%-4s %-5lu %-5u %-5u %-5u %-5u %-5u "
- "%-6lu %-5lu %-5lu\n", "R", ts->ts_tid,
- jiffies_to_msecs(ts->u.run.rs_wait),
- jiffies_to_msecs(ts->u.run.rs_running),
- jiffies_to_msecs(ts->u.run.rs_locked),
- jiffies_to_msecs(ts->u.run.rs_flushing),
- jiffies_to_msecs(ts->u.run.rs_logging),
- ts->u.run.rs_handle_count,
- ts->u.run.rs_blocks,
- ts->u.run.rs_blocks_logged);
- else if (ts->ts_type == JBD2_STATS_CHECKPOINT)
- seq_printf(seq, "%-4s %-5lu %48s %-5u %-5lu %-5lu %-5lu\n",
- "C", ts->ts_tid, " ",
- jiffies_to_msecs(ts->u.chp.cs_chp_time),
- ts->u.chp.cs_written, ts->u.chp.cs_dropped,
- ts->u.chp.cs_forced_to_close);
- else
- J_ASSERT(0);
- return 0;
-}
-
-static void jbd2_seq_history_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations jbd2_seq_history_ops = {
- .start = jbd2_seq_history_start,
- .next = jbd2_seq_history_next,
- .stop = jbd2_seq_history_stop,
- .show = jbd2_seq_history_show,
-};
-
-static int jbd2_seq_history_open(struct inode *inode, struct file *file)
-{
- journal_t *journal = PDE(inode)->data;
- struct jbd2_stats_proc_session *s;
- int rc, size;
-
- s = kmalloc(sizeof(*s), GFP_KERNEL);
- if (s == NULL)
- return -ENOMEM;
- size = sizeof(struct transaction_stats_s) * journal->j_history_max;
- s->stats = kmalloc(size, GFP_KERNEL);
- if (s->stats == NULL) {
- kfree(s);
- return -ENOMEM;
- }
- spin_lock(&journal->j_history_lock);
- memcpy(s->stats, journal->j_history, size);
- s->max = journal->j_history_max;
- s->start = journal->j_history_cur % s->max;
- spin_unlock(&journal->j_history_lock);
-
- rc = seq_open(file, &jbd2_seq_history_ops);
- if (rc == 0) {
- struct seq_file *m = file->private_data;
- m->private = s;
- } else {
- kfree(s->stats);
- kfree(s);
- }
- return rc;
-
-}
-
-static int jbd2_seq_history_release(struct inode *inode, struct file *file)
-{
- struct seq_file *seq = file->private_data;
- struct jbd2_stats_proc_session *s = seq->private;
-
- kfree(s->stats);
- kfree(s);
- return seq_release(inode, file);
-}
-
-static struct file_operations jbd2_seq_history_fops = {
- .owner = THIS_MODULE,
- .open = jbd2_seq_history_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = jbd2_seq_history_release,
-};
-
static void *jbd2_seq_info_start(struct seq_file *seq, loff_t *pos)
{
return *pos ? NULL : SEQ_START_TOKEN;
if (v != SEQ_START_TOKEN)
return 0;
- seq_printf(seq, "%lu transaction, each upto %u blocks\n",
+ seq_printf(seq, "%lu transaction, each up to %u blocks\n",
s->stats->ts_tid,
s->journal->j_max_transaction_buffers);
if (s->stats->ts_tid == 0)
return 0;
seq_printf(seq, "average: \n %ums waiting for transaction\n",
- jiffies_to_msecs(s->stats->u.run.rs_wait / s->stats->ts_tid));
+ jiffies_to_msecs(s->stats->run.rs_wait / s->stats->ts_tid));
seq_printf(seq, " %ums running transaction\n",
- jiffies_to_msecs(s->stats->u.run.rs_running / s->stats->ts_tid));
+ jiffies_to_msecs(s->stats->run.rs_running / s->stats->ts_tid));
seq_printf(seq, " %ums transaction was being locked\n",
- jiffies_to_msecs(s->stats->u.run.rs_locked / s->stats->ts_tid));
+ jiffies_to_msecs(s->stats->run.rs_locked / s->stats->ts_tid));
seq_printf(seq, " %ums flushing data (in ordered mode)\n",
- jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid));
+ jiffies_to_msecs(s->stats->run.rs_flushing / s->stats->ts_tid));
seq_printf(seq, " %ums logging transaction\n",
- jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid));
+ jiffies_to_msecs(s->stats->run.rs_logging / s->stats->ts_tid));
seq_printf(seq, " %lluus average transaction commit time\n",
div_u64(s->journal->j_average_commit_time, 1000));
seq_printf(seq, " %lu handles per transaction\n",
- s->stats->u.run.rs_handle_count / s->stats->ts_tid);
+ s->stats->run.rs_handle_count / s->stats->ts_tid);
seq_printf(seq, " %lu blocks per transaction\n",
- s->stats->u.run.rs_blocks / s->stats->ts_tid);
+ s->stats->run.rs_blocks / s->stats->ts_tid);
seq_printf(seq, " %lu logged blocks per transaction\n",
- s->stats->u.run.rs_blocks_logged / s->stats->ts_tid);
+ s->stats->run.rs_blocks_logged / s->stats->ts_tid);
return 0;
}
return seq_release(inode, file);
}
-static struct file_operations jbd2_seq_info_fops = {
+static const struct file_operations jbd2_seq_info_fops = {
.owner = THIS_MODULE,
.open = jbd2_seq_info_open,
.read = seq_read,
{
journal->j_proc_entry = proc_mkdir(journal->j_devname, proc_jbd2_stats);
if (journal->j_proc_entry) {
- proc_create_data("history", S_IRUGO, journal->j_proc_entry,
- &jbd2_seq_history_fops, journal);
proc_create_data("info", S_IRUGO, journal->j_proc_entry,
&jbd2_seq_info_fops, journal);
}
static void jbd2_stats_proc_exit(journal_t *journal)
{
remove_proc_entry("info", journal->j_proc_entry);
- remove_proc_entry("history", journal->j_proc_entry);
remove_proc_entry(journal->j_devname, proc_jbd2_stats);
}
-static void journal_init_stats(journal_t *journal)
-{
- int size;
-
- if (!proc_jbd2_stats)
- return;
-
- journal->j_history_max = 100;
- size = sizeof(struct transaction_stats_s) * journal->j_history_max;
- journal->j_history = kzalloc(size, GFP_KERNEL);
- if (!journal->j_history) {
- journal->j_history_max = 0;
- return;
- }
- spin_lock_init(&journal->j_history_lock);
-}
-
/*
* Management for journal control blocks: functions to create and
* destroy journal_t structures, and to initialise and read existing
goto fail;
}
- journal_init_stats(journal);
+ spin_lock_init(&journal->j_history_lock);
return journal;
fail:
while ((p = strchr(p, '/')))
*p = '!';
p = journal->j_devname + strlen(journal->j_devname);
- sprintf(p, ":%lu", journal->j_inode->i_ino);
+ sprintf(p, "-%lu", journal->j_inode->i_ino);
jbd_debug(1,
"journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n",
journal, inode->i_sb->s_id, inode->i_ino,
rc = jfs_umount(sb);
if (rc)
jfs_err("jfs_umount failed with return code %d", rc);
- if (sbi->nls_tab)
- unload_nls(sbi->nls_tab);
- sbi->nls_tab = NULL;
+
+ unload_nls(sbi->nls_tab);
truncate_inode_pages(sbi->direct_inode->i_mapping, 0);
iput(sbi->direct_inode);
- sbi->direct_inode = NULL;
kfree(sbi);
if (nls_map != (void *) -1) {
/* Discard old (if remount) */
- if (sbi->nls_tab)
- unload_nls(sbi->nls_tab);
+ unload_nls(sbi->nls_tab);
sbi->nls_tab = nls_map;
}
return 1;
const void *from, size_t available)
{
loff_t pos = *ppos;
+ size_t ret;
+
if (pos < 0)
return -EINVAL;
- if (pos >= available)
+ if (pos >= available || !count)
return 0;
if (count > available - pos)
count = available - pos;
- if (copy_to_user(to, from + pos, count))
+ ret = copy_to_user(to, from + pos, count);
+ if (ret == count)
return -EFAULT;
+ count -= ret;
*ppos = pos + count;
return count;
}
if (copy_from_user(attr->set_buf, buf, size))
goto out;
- ret = len; /* claim we got the whole input */
attr->set_buf[size] = '\0';
val = simple_strtol(attr->set_buf, NULL, 0);
- attr->set(attr->data, val);
+ ret = attr->set(attr->data, val);
+ if (ret == 0)
+ ret = len; /* on success, claim we got the whole input */
out:
mutex_unlock(&attr->mutex);
return ret;
#include <linux/types.h>
#include <linux/sched.h>
-#include <linux/utsname.h>
#include <linux/nfs.h>
#include <linux/sunrpc/xdr.h>
#include <linux/types.h>
#include <linux/sched.h>
-#include <linux/utsname.h>
#include <linux/nfs.h>
#include <linux/sunrpc/xdr.h>
{
struct vfsmount *mnt;
- if (!type || !memchr(type, 0, PAGE_SIZE))
+ if (!type)
return -EINVAL;
/* we need capabilities... */
return 0;
}
+int copy_mount_string(const void __user *data, char **where)
+{
+ char *tmp;
+
+ if (!data) {
+ *where = NULL;
+ return 0;
+ }
+
+ tmp = strndup_user(data, PAGE_SIZE);
+ if (IS_ERR(tmp))
+ return PTR_ERR(tmp);
+
+ *where = tmp;
+ return 0;
+}
+
/*
* Flags is a 32-bit value that allows up to 31 non-fs dependent flags to
* be given to the mount() call (ie: read-only, no-dev, no-suid etc).
if (!dir_name || !*dir_name || !memchr(dir_name, 0, PAGE_SIZE))
return -EINVAL;
- if (dev_name && !memchr(dev_name, 0, PAGE_SIZE))
- return -EINVAL;
if (data_page)
((char *)data_page)[PAGE_SIZE - 1] = 0;
SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
char __user *, type, unsigned long, flags, void __user *, data)
{
- int retval;
+ int ret;
+ char *kernel_type;
+ char *kernel_dir;
+ char *kernel_dev;
unsigned long data_page;
- unsigned long type_page;
- unsigned long dev_page;
- char *dir_page;
- retval = copy_mount_options(type, &type_page);
- if (retval < 0)
- return retval;
+ ret = copy_mount_string(type, &kernel_type);
+ if (ret < 0)
+ goto out_type;
- dir_page = getname(dir_name);
- retval = PTR_ERR(dir_page);
- if (IS_ERR(dir_page))
- goto out1;
+ kernel_dir = getname(dir_name);
+ if (IS_ERR(kernel_dir)) {
+ ret = PTR_ERR(kernel_dir);
+ goto out_dir;
+ }
- retval = copy_mount_options(dev_name, &dev_page);
- if (retval < 0)
- goto out2;
+ ret = copy_mount_string(dev_name, &kernel_dev);
+ if (ret < 0)
+ goto out_dev;
- retval = copy_mount_options(data, &data_page);
- if (retval < 0)
- goto out3;
+ ret = copy_mount_options(data, &data_page);
+ if (ret < 0)
+ goto out_data;
- retval = do_mount((char *)dev_page, dir_page, (char *)type_page,
- flags, (void *)data_page);
- free_page(data_page);
+ ret = do_mount(kernel_dev, kernel_dir, kernel_type, flags,
+ (void *) data_page);
-out3:
- free_page(dev_page);
-out2:
- putname(dir_page);
-out1:
- free_page(type_page);
- return retval;
+ free_page(data_page);
+out_data:
+ kfree(kernel_dev);
+out_dev:
+ putname(kernel_dir);
+out_dir:
+ kfree(kernel_type);
+out_type:
+ return ret;
}
/*
#ifdef CONFIG_NCPFS_NLS
/* unload the NLS charsets */
- if (server->nls_vol)
- {
- unload_nls(server->nls_vol);
- server->nls_vol = NULL;
- }
- if (server->nls_io)
- {
- unload_nls(server->nls_io);
- server->nls_io = NULL;
- }
+ unload_nls(server->nls_vol);
+ unload_nls(server->nls_io);
#endif /* CONFIG_NCPFS_NLS */
if (server->info_filp)
oldset_io = server->nls_io;
server->nls_io = iocharset;
- if (oldset_cp)
- unload_nls(oldset_cp);
- if (oldset_io)
- unload_nls(oldset_io);
+ unload_nls(oldset_cp);
+ unload_nls(oldset_io);
return 0;
}
return VM_FAULT_MAJOR;
}
-static struct vm_operations_struct ncp_file_mmap =
+static const struct vm_operations_struct ncp_file_mmap =
{
.fault = ncp_file_mmap_fault,
};
.hostname = clp->cl_hostname,
.address = (struct sockaddr *)&clp->cl_addr,
.addrlen = clp->cl_addrlen,
- .protocol = server->flags & NFS_MOUNT_TCP ?
- IPPROTO_TCP : IPPROTO_UDP,
.nfs_version = clp->rpc_ops->version,
.noresvport = server->flags & NFS_MOUNT_NORESVPORT ?
1 : 0,
if (server->flags & NFS_MOUNT_NONLM)
return 0;
+ switch (clp->cl_proto) {
+ default:
+ nlm_init.protocol = IPPROTO_TCP;
+ break;
+ case XPRT_TRANSPORT_UDP:
+ nlm_init.protocol = IPPROTO_UDP;
+ }
+
host = nlmclnt_init(&nlm_init);
if (IS_ERR(host))
return PTR_ERR(host);
dprintk("--> nfs_init_server()\n");
#ifdef CONFIG_NFS_V3
- if (data->flags & NFS_MOUNT_VER3)
+ if (data->version == 3)
cl_init.rpc_ops = &nfs_v3_clientops;
#endif
target->acdirmin = source->acdirmin;
target->acdirmax = source->acdirmax;
target->caps = source->caps;
+ target->options = source->options;
}
/*
1, flags & NFS_MOUNT_NORESVPORT);
if (error < 0)
goto error;
- memcpy(clp->cl_ipaddr, ip_addr, sizeof(clp->cl_ipaddr));
+ strlcpy(clp->cl_ipaddr, ip_addr, sizeof(clp->cl_ipaddr));
error = nfs_idmap_new(clp);
if (error < 0) {
old_dentry->d_parent->d_name.name, old_dentry->d_name.name,
dentry->d_parent->d_name.name, dentry->d_name.name);
+ nfs_inode_return_delegation(inode);
+
d_drop(dentry);
error = NFS_PROTO(dir)->link(inode, dir, &dentry->d_name);
if (error == 0) {
};
struct rpc_task_setup task_setup_data = {
.rpc_client = NFS_CLIENT(inode),
+ .rpc_message = &msg,
.callback_ops = &nfs_write_direct_ops,
.workqueue = nfsiod_workqueue,
.flags = RPC_TASK_ASYNC,
static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl);
static int nfs_setlease(struct file *file, long arg, struct file_lock **fl);
-static struct vm_operations_struct nfs_file_vm_ops;
+static const struct vm_operations_struct nfs_file_vm_ops;
const struct file_operations nfs_file_operations = {
.llseek = nfs_file_llseek,
.direct_IO = nfs_direct_IO,
.migratepage = nfs_migrate_page,
.launder_page = nfs_launder_page,
+ .error_remove_page = generic_error_remove_page,
};
/*
return VM_FAULT_SIGBUS;
}
-static struct vm_operations_struct nfs_file_vm_ops = {
+static const struct vm_operations_struct nfs_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = nfs_vm_page_mkwrite,
};
/*
* Get the cache cookie for an NFS superblock. We have to handle
* uniquification here because the cache doesn't do it for us.
+ *
+ * The default uniquifier is just an empty string, but it may be overridden
+ * either by the 'fsc=xxx' option to mount, or by inheriting it from the parent
+ * superblock across an automount point of some nature.
*/
-void nfs_fscache_get_super_cookie(struct super_block *sb,
- struct nfs_parsed_mount_data *data)
+void nfs_fscache_get_super_cookie(struct super_block *sb, const char *uniq,
+ struct nfs_clone_mount *mntdata)
{
struct nfs_fscache_key *key, *xkey;
struct nfs_server *nfss = NFS_SB(sb);
struct rb_node **p, *parent;
- const char *uniq = data->fscache_uniq ?: "";
int diff, ulen;
- ulen = strlen(uniq);
+ if (uniq) {
+ ulen = strlen(uniq);
+ } else if (mntdata) {
+ struct nfs_server *mnt_s = NFS_SB(mntdata->sb);
+ if (mnt_s->fscache_key) {
+ uniq = mnt_s->fscache_key->key.uniquifier;
+ ulen = mnt_s->fscache_key->key.uniq_len;
+ }
+ }
+
+ if (!uniq) {
+ uniq = "";
+ ulen = 1;
+ }
+
key = kzalloc(sizeof(*key) + ulen, GFP_KERNEL);
if (!key)
return;
extern void nfs_fscache_release_client_cookie(struct nfs_client *);
extern void nfs_fscache_get_super_cookie(struct super_block *,
- struct nfs_parsed_mount_data *);
+ const char *,
+ struct nfs_clone_mount *);
extern void nfs_fscache_release_super_cookie(struct super_block *);
extern void nfs_fscache_init_inode_cookie(struct inode *);
static inline void nfs_fscache_get_super_cookie(
struct super_block *sb,
- struct nfs_parsed_mount_data *data)
+ const char *uniq,
+ struct nfs_clone_mount *mntdata)
{
}
static inline void nfs_fscache_release_super_cookie(struct super_block *sb) {}
*/
static int nfs_vmtruncate(struct inode * inode, loff_t offset)
{
- if (i_size_read(inode) < offset) {
- unsigned long limit;
-
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit)
- goto out_sig;
- if (offset > inode->i_sb->s_maxbytes)
- goto out_big;
- spin_lock(&inode->i_lock);
- i_size_write(inode, offset);
- spin_unlock(&inode->i_lock);
- } else {
- struct address_space *mapping = inode->i_mapping;
+ loff_t oldsize;
+ int err;
- /*
- * truncation of in-use swapfiles is disallowed - it would
- * cause subsequent swapout to scribble on the now-freed
- * blocks.
- */
- if (IS_SWAPFILE(inode))
- return -ETXTBSY;
- spin_lock(&inode->i_lock);
- i_size_write(inode, offset);
- spin_unlock(&inode->i_lock);
+ err = inode_newsize_ok(inode, offset);
+ if (err)
+ goto out;
- /*
- * unmap_mapping_range is called twice, first simply for
- * efficiency so that truncate_inode_pages does fewer
- * single-page unmaps. However after this first call, and
- * before truncate_inode_pages finishes, it is possible for
- * private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second
- * unmap_mapping_range call must be made for correctness.
- */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- }
- return 0;
-out_sig:
- send_sig(SIGXFSZ, current, 0);
-out_big:
- return -EFBIG;
+ spin_lock(&inode->i_lock);
+ oldsize = inode->i_size;
+ i_size_write(inode, offset);
+ spin_unlock(&inode->i_lock);
+
+ truncate_pagecache(inode, oldsize, offset);
+out:
+ return err;
}
/**
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
*/
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/sunrpc/clnt.h>
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
mnt_path = nfs4_pathname_string(&location->rootpath, page2, PAGE_SIZE);
if (IS_ERR(mnt_path))
- return mnt;
+ return ERR_CAST(mnt_path);
mountdata->mnt_path = mnt_path;
maxbuflen = mnt_path - 1 - page2;
if (buf->len <= 0 || buf->len >= maxbuflen)
continue;
- mountdata->addr = (struct sockaddr *)&addr;
-
if (memchr(buf->data, IPV6_SCOPE_DELIMITER, buf->len))
continue;
- mountdata->addrlen = nfs_parse_server_name(buf->data,
- buf->len,
- mountdata->addr, mountdata->addrlen);
+
+ mountdata->addrlen = nfs_parse_server_name(buf->data, buf->len,
+ (struct sockaddr *)&addr, sizeof(addr));
if (mountdata->addrlen == 0)
continue;
+
+ mountdata->addr = (struct sockaddr *)&addr;
rpc_set_port(mountdata->addr, NFS_PORT);
memcpy(page2, buf->data, buf->len);
*/
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/string.h>
/* Prevent leaks of NFSv4 errors into userland */
static int nfs4_map_errors(int err)
{
- if (err < -1000) {
+ if (err >= -1000)
+ return err;
+ switch (err) {
+ case -NFS4ERR_RESOURCE:
+ return -EREMOTEIO;
+ default:
dprintk("%s could not handle NFSv4 error %d\n",
__func__, -err);
- return -EIO;
+ break;
}
- return err;
+ return -EIO;
}
/*
if (time_before(clp->cl_last_renewal,timestamp))
clp->cl_last_renewal = timestamp;
spin_unlock(&clp->cl_lock);
- dprintk("%s calling put_rpccred on rpc_cred %p\n", __func__,
- task->tk_msg.rpc_cred);
- put_rpccred(task->tk_msg.rpc_cred);
}
static const struct rpc_call_ops nfs4_renew_ops = {
nfs41_sequence_free_slot(clp, task->tk_msg.rpc_resp);
dprintk("%s rpc_cred %p\n", __func__, task->tk_msg.rpc_cred);
- put_rpccred(task->tk_msg.rpc_cred);
kfree(task->tk_msg.rpc_argp);
kfree(task->tk_msg.rpc_resp);
spin_unlock(&clp->cl_lock);
}
-void
-nfs4_renewd_prepare_shutdown(struct nfs_server *server)
-{
- cancel_delayed_work(&server->nfs_client->cl_renewd);
-}
-
void
nfs4_kill_renewd(struct nfs_client *clp)
{
#include <linux/time.h>
#include <linux/mm.h>
#include <linux/slab.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
{ NFS4ERR_SERVERFAULT, -ESERVERFAULT },
{ NFS4ERR_BADTYPE, -EBADTYPE },
{ NFS4ERR_LOCKED, -EAGAIN },
- { NFS4ERR_RESOURCE, -EREMOTEIO },
{ NFS4ERR_SYMLINK, -ELOOP },
{ NFS4ERR_OP_ILLEGAL, -EOPNOTSUPP },
{ NFS4ERR_DEADLOCK, -EDEADLK },
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/in.h>
unlock_kernel();
}
+static struct nfs_parsed_mount_data *nfs_alloc_parsed_mount_data(unsigned int version)
+{
+ struct nfs_parsed_mount_data *data;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (data) {
+ data->rsize = NFS_MAX_FILE_IO_SIZE;
+ data->wsize = NFS_MAX_FILE_IO_SIZE;
+ data->acregmin = NFS_DEF_ACREGMIN;
+ data->acregmax = NFS_DEF_ACREGMAX;
+ data->acdirmin = NFS_DEF_ACDIRMIN;
+ data->acdirmax = NFS_DEF_ACDIRMAX;
+ data->mount_server.port = NFS_UNSPEC_PORT;
+ data->nfs_server.port = NFS_UNSPEC_PORT;
+ data->nfs_server.protocol = XPRT_TRANSPORT_TCP;
+ data->auth_flavors[0] = RPC_AUTH_UNIX;
+ data->auth_flavor_len = 1;
+ data->version = version;
+ data->minorversion = 0;
+ }
+ return data;
+}
+
/*
* Sanity-check a server address provided by the mount command.
*
* Select between a default port value and a user-specified port value.
* If a zero value is set, then autobind will be used.
*/
-static void nfs_set_default_port(struct sockaddr *sap, const int parsed_port,
+static void nfs_set_port(struct sockaddr *sap, int *port,
const unsigned short default_port)
{
- unsigned short port = default_port;
+ if (*port == NFS_UNSPEC_PORT)
+ *port = default_port;
- if (parsed_port != NFS_UNSPEC_PORT)
- port = parsed_port;
-
- rpc_set_port(sap, port);
+ rpc_set_port(sap, *port);
}
/*
default:
dfprintk(MOUNT, "NFS: unrecognized "
"transport protocol\n");
+ kfree(string);
return 0;
}
break;
int status;
if (args->mount_server.version == 0) {
- if (args->flags & NFS_MOUNT_VER3)
- args->mount_server.version = NFS_MNT3_VERSION;
- else
- args->mount_server.version = NFS_MNT_VERSION;
+ switch (args->version) {
+ default:
+ args->mount_server.version = NFS_MNT3_VERSION;
+ break;
+ case 2:
+ args->mount_server.version = NFS_MNT_VERSION;
+ }
}
request.version = args->mount_server.version;
args->mount_server.addrlen = args->nfs_server.addrlen;
}
request.salen = args->mount_server.addrlen;
- nfs_set_default_port(request.sap, args->mount_server.port, 0);
+ nfs_set_port(request.sap, &args->mount_server.port, 0);
/*
* Now ask the mount server to map our export path
if (data == NULL)
goto out_no_data;
- args->flags = (NFS_MOUNT_VER3 | NFS_MOUNT_TCP);
- args->rsize = NFS_MAX_FILE_IO_SIZE;
- args->wsize = NFS_MAX_FILE_IO_SIZE;
- args->acregmin = NFS_DEF_ACREGMIN;
- args->acregmax = NFS_DEF_ACREGMAX;
- args->acdirmin = NFS_DEF_ACDIRMIN;
- args->acdirmax = NFS_DEF_ACDIRMAX;
- args->mount_server.port = NFS_UNSPEC_PORT;
- args->nfs_server.port = NFS_UNSPEC_PORT;
- args->nfs_server.protocol = XPRT_TRANSPORT_TCP;
- args->auth_flavors[0] = RPC_AUTH_UNIX;
- args->auth_flavor_len = 1;
- args->minorversion = 0;
-
switch (data->version) {
case 1:
data->namlen = 0;
goto out_v4_not_compiled;
#endif
- nfs_set_default_port(sap, args->nfs_server.port, 0);
+ nfs_set_port(sap, &args->nfs_server.port, 0);
nfs_set_mount_transport_protocol(args);
}
#ifndef CONFIG_NFS_V3
- if (args->flags & NFS_MOUNT_VER3)
+ if (args->version == 3)
goto out_v3_not_compiled;
#endif /* !CONFIG_NFS_V3 */
data->acdirmin != nfss->acdirmin / HZ ||
data->acdirmax != nfss->acdirmax / HZ ||
data->timeo != (10U * nfss->client->cl_timeout->to_initval / HZ) ||
+ data->nfs_server.port != nfss->port ||
data->nfs_server.addrlen != nfss->nfs_client->cl_addrlen ||
- memcmp(&data->nfs_server.address, &nfss->nfs_client->cl_addr,
- data->nfs_server.addrlen) != 0)
+ !rpc_cmp_addr((struct sockaddr *)&data->nfs_server.address,
+ (struct sockaddr *)&nfss->nfs_client->cl_addr))
return -EINVAL;
return 0;
data->acdirmin = nfss->acdirmin / HZ;
data->acdirmax = nfss->acdirmax / HZ;
data->timeo = 10U * nfss->client->cl_timeout->to_initval / HZ;
+ data->nfs_server.port = nfss->port;
data->nfs_server.addrlen = nfss->nfs_client->cl_addrlen;
memcpy(&data->nfs_server.address, &nfss->nfs_client->cl_addr,
data->nfs_server.addrlen);
if (data->bsize)
sb->s_blocksize = nfs_block_size(data->bsize, &sb->s_blocksize_bits);
- if (server->flags & NFS_MOUNT_VER3) {
+ if (server->nfs_client->rpc_ops->version == 3) {
/* The VFS shouldn't apply the umask to mode bits. We will do
* so ourselves when necessary.
*/
sb->s_blocksize = old_sb->s_blocksize;
sb->s_maxbytes = old_sb->s_maxbytes;
- if (server->flags & NFS_MOUNT_VER3) {
+ if (server->nfs_client->rpc_ops->version == 3) {
/* The VFS shouldn't apply the umask to mode bits. We will do
* so ourselves when necessary.
*/
};
int error = -ENOMEM;
- data = kzalloc(sizeof(*data), GFP_KERNEL);
+ data = nfs_alloc_parsed_mount_data(3);
mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL);
if (data == NULL || mntfh == NULL)
goto out_free_fh;
if (!s->s_root) {
/* initial superblock/root creation */
nfs_fill_super(s, data);
- nfs_fscache_get_super_cookie(s, data);
+ nfs_fscache_get_super_cookie(
+ s, data ? data->fscache_uniq : NULL, NULL);
}
mntroot = nfs_get_root(s, mntfh);
if (!s->s_root) {
/* initial superblock/root creation */
nfs_clone_super(s, data->sb);
+ nfs_fscache_get_super_cookie(s, NULL, data);
}
mntroot = nfs_get_root(s, data->fh);
{
struct sockaddr *sap = (struct sockaddr *)&args->nfs_server.address;
- nfs_set_default_port(sap, args->nfs_server.port, NFS_PORT);
+ nfs_set_port(sap, &args->nfs_server.port, NFS_PORT);
nfs_validate_transport_protocol(args);
if (data == NULL)
goto out_no_data;
- args->rsize = NFS_MAX_FILE_IO_SIZE;
- args->wsize = NFS_MAX_FILE_IO_SIZE;
- args->acregmin = NFS_DEF_ACREGMIN;
- args->acregmax = NFS_DEF_ACREGMAX;
- args->acdirmin = NFS_DEF_ACDIRMIN;
- args->acdirmax = NFS_DEF_ACDIRMAX;
- args->nfs_server.port = NFS_UNSPEC_PORT;
- args->auth_flavors[0] = RPC_AUTH_UNIX;
- args->auth_flavor_len = 1;
- args->version = 4;
- args->minorversion = 0;
-
switch (data->version) {
case 1:
if (data->host_addrlen > sizeof(args->nfs_server.address))
if (!s->s_root) {
/* initial superblock/root creation */
nfs4_fill_super(s);
- nfs_fscache_get_super_cookie(s, data);
+ nfs_fscache_get_super_cookie(
+ s, data ? data->fscache_uniq : NULL, NULL);
}
mntroot = nfs4_get_root(s, mntfh);
struct nfs_parsed_mount_data *data;
int error = -ENOMEM;
- data = kzalloc(sizeof(*data), GFP_KERNEL);
+ data = nfs_alloc_parsed_mount_data(4);
if (data == NULL)
goto out_free_data;
dprintk("--> %s\n", __func__);
nfs_super_return_all_delegations(sb);
kill_anon_super(sb);
- nfs4_renewd_prepare_shutdown(server);
nfs_fscache_release_super_cookie(sb);
nfs_free_server(server);
dprintk("<-- %s\n", __func__);
if (!s->s_root) {
/* initial superblock/root creation */
nfs4_clone_super(s, data->sb);
+ nfs_fscache_get_super_cookie(s, NULL, data);
}
mntroot = nfs4_get_root(s, data->fh);
if (!s->s_root) {
/* initial superblock/root creation */
nfs4_fill_super(s);
+ nfs_fscache_get_super_cookie(s, NULL, data);
}
mntroot = nfs4_get_root(s, &mntfh);
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/sunrpc/clnt.h>
extern int nfsd_pool_stats_open(struct inode *inode, struct file *file);
extern int nfsd_pool_stats_release(struct inode *inode, struct file *file);
-static struct file_operations pool_stats_operations = {
+static const struct file_operations pool_stats_operations = {
.open = nfsd_pool_stats_open,
.read = seq_read,
.llseek = seq_lseek,
void nilfs_btnode_cache_init_once(struct address_space *btnc)
{
+ memset(btnc, 0, sizeof(*btnc));
INIT_RADIX_TREE(&btnc->page_tree, GFP_ATOMIC);
spin_lock_init(&btnc->tree_lock);
INIT_LIST_HEAD(&btnc->private_list);
brelse(bh);
BUG();
}
+ memset(bh->b_data, 0, 1 << inode->i_blkbits);
bh->b_bdev = NILFS_I_NILFS(inode)->ns_bdev;
bh->b_blocknr = blocknr;
set_buffer_mapped(bh);
"invalid oldkey %lld (newkey=%lld)",
(unsigned long long)oldkey,
(unsigned long long)newkey);
- if (!test_set_buffer_dirty(obh) && TestSetPageDirty(opage))
- BUG();
+ nilfs_btnode_mark_dirty(obh);
spin_lock_irq(&btnc->tree_lock);
radix_tree_delete(&btnc->page_tree, oldkey);
return 0;
}
-struct file_operations nilfs_dir_operations = {
+const struct file_operations nilfs_dir_operations = {
.llseek = generic_file_llseek,
.read = generic_read_dir,
.readdir = nilfs_readdir,
return 0;
}
-struct vm_operations_struct nilfs_file_vm_ops = {
+static const struct vm_operations_struct nilfs_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = nilfs_page_mkwrite,
};
* We have mostly NULL's here: the current defaults are ok for
* the nilfs filesystem.
*/
-struct file_operations nilfs_file_operations = {
+const struct file_operations nilfs_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
ii->i_dir_acl = S_ISREG(inode->i_mode) ?
0 : le32_to_cpu(raw_inode->i_dir_acl);
#endif
+ ii->i_dir_start_lookup = 0;
ii->i_cno = 0;
inode->i_generation = le32_to_cpu(raw_inode->i_generation);
};
static const struct inode_operations def_mdt_iops;
-static struct file_operations def_mdt_fops;
+static const struct file_operations def_mdt_fops;
/*
* NILFS2 uses pseudo inodes for meta data files such as DAT, cpfile, sufile,
/*
* Inodes and files operations
*/
-extern struct file_operations nilfs_dir_operations;
+extern const struct file_operations nilfs_dir_operations;
extern const struct inode_operations nilfs_file_inode_operations;
-extern struct file_operations nilfs_file_operations;
+extern const struct file_operations nilfs_file_operations;
extern const struct address_space_operations nilfs_aops;
extern const struct inode_operations nilfs_dir_inode_operations;
extern const struct inode_operations nilfs_special_inode_operations;
/* Clear requests (even when the construction failed) */
spin_lock(&sci->sc_state_lock);
- sci->sc_state &= ~NILFS_SEGCTOR_COMMIT;
-
if (req->mode == SC_LSEG_SR) {
+ sci->sc_state &= ~NILFS_SEGCTOR_COMMIT;
sci->sc_seq_done = req->seq_accepted;
nilfs_segctor_wakeup(sci, req->sc_err ? : req->sb_err);
sci->sc_flush_request = 0;
- } else if (req->mode == SC_FLUSH_FILE)
- sci->sc_flush_request &= ~FLUSH_FILE_BIT;
- else if (req->mode == SC_FLUSH_DAT)
- sci->sc_flush_request &= ~FLUSH_DAT_BIT;
+ } else {
+ if (req->mode == SC_FLUSH_FILE)
+ sci->sc_flush_request &= ~FLUSH_FILE_BIT;
+ else if (req->mode == SC_FLUSH_DAT)
+ sci->sc_flush_request &= ~FLUSH_DAT_BIT;
+ /* re-enable timer if checkpoint creation was not done */
+ if (sci->sc_timer && (sci->sc_state & NILFS_SEGCTOR_COMMIT) &&
+ time_before(jiffies, sci->sc_timer->expires))
+ add_timer(sci->sc_timer);
+ }
spin_unlock(&sci->sc_state_lock);
}
while (*s && len > 0) {
if (*s & 0x80) {
size = utf8_to_utf32(s, len, &u);
- if (size < 0) {
- /* Ignore character and move on */
- size = 1;
- } else if (u >= PLANE_SIZE) {
+ if (size < 0)
+ return -EINVAL;
+
+ if (u >= PLANE_SIZE) {
u -= PLANE_SIZE;
*op++ = (wchar_t) (SURROGATE_PAIR |
((u >> 10) & SURROGATE_BITS));
void unload_nls(struct nls_table *nls)
{
- module_put(nls->owner);
+ if (nls)
+ module_put(nls->owner);
}
static const wchar_t charset2uni[256] = {
struct dnotify_struct *dn;
struct dnotify_struct **prev;
struct fown_struct *fown;
+ __u32 test_mask = event->mask & ~FS_EVENT_ON_CHILD;
to_tell = event->to_tell;
spin_lock(&entry->lock);
prev = &dnentry->dn;
while ((dn = *prev) != NULL) {
- if ((dn->dn_mask & event->mask) == 0) {
+ if ((dn->dn_mask & test_mask) == 0) {
prev = &dn->dn_next;
continue;
}
spin_lock(&group->mark_lock);
spin_lock(&inode->i_lock);
- entry->group = group;
- entry->inode = inode;
-
lentry = fsnotify_find_mark_entry(group, inode);
if (!lentry) {
+ entry->group = group;
+ entry->inode = inode;
+
hlist_add_head(&entry->i_list, &inode->i_fsnotify_mark_entries);
list_add(&entry->g_list, &group->mark_entries);
/* remember, after old was put on the wait_q we aren't
* allowed to look at the inode any more, only thing
* left to check was if the file_name is the same */
- if (old->name_len &&
+ if (!old->name_len ||
!strcmp(old->file_name, new->file_name))
return true;
break;
.migratepage = buffer_migrate_page, /* Move a page cache page from
one physical page to an
other. */
+ .error_remove_page = generic_error_remove_page,
};
/**
.migratepage = buffer_migrate_page, /* Move a page cache page from
one physical page to an
other. */
+ .error_remove_page = generic_error_remove_page,
};
#ifdef NTFS_RW
v, old_nls->charset);
nls_map = old_nls;
} else /* nls_map */ {
- if (old_nls)
- unload_nls(old_nls);
+ unload_nls(old_nls);
}
} else if (!strcmp(p, "utf8")) {
bool val = false;
ntfs_free(vol->upcase);
vol->upcase = NULL;
}
- if (vol->nls_map) {
- unload_nls(vol->nls_map);
- vol->nls_map = NULL;
- }
+
+ unload_nls(vol->nls_map);
+
sb->s_fs_info = NULL;
kfree(vol);
.releasepage = ocfs2_releasepage,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
}
#endif /* CONFIG_DEBUG_FS */
-static struct file_operations o2hb_debug_fops = {
+static const struct file_operations o2hb_debug_fops = {
.open = o2hb_debug_open,
.release = o2hb_debug_release,
.read = o2hb_debug_read,
return seq_release_private(inode, file);
}
-static struct file_operations nst_seq_fops = {
+static const struct file_operations nst_seq_fops = {
.open = nst_fop_open,
.read = seq_read,
.llseek = seq_lseek,
return seq_release_private(inode, file);
}
-static struct file_operations sc_seq_fops = {
+static const struct file_operations sc_seq_fops = {
.open = sc_fop_open,
.read = seq_read,
.llseek = seq_lseek,
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/sysctl.h>
#include <linux/spinlock.h>
#include <linux/debugfs.h>
return -ENOMEM;
}
-static struct file_operations debug_purgelist_fops = {
+static const struct file_operations debug_purgelist_fops = {
.open = debug_purgelist_open,
.release = debug_buffer_release,
.read = debug_buffer_read,
return -ENOMEM;
}
-static struct file_operations debug_mle_fops = {
+static const struct file_operations debug_mle_fops = {
.open = debug_mle_open,
.release = debug_buffer_release,
.read = debug_buffer_read,
return seq_release_private(inode, file);
}
-static struct file_operations debug_lockres_fops = {
+static const struct file_operations debug_lockres_fops = {
.open = debug_lockres_open,
.release = debug_lockres_release,
.read = seq_read,
return -ENOMEM;
}
-static struct file_operations debug_state_fops = {
+static const struct file_operations debug_state_fops = {
.open = debug_state_open,
.release = debug_buffer_release,
.read = debug_buffer_read,
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/delay.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/sysctl.h>
#include <linux/random.h>
return ret;
}
-static struct vm_operations_struct ocfs2_file_vm_ops = {
+static const struct vm_operations_struct ocfs2_file_vm_ops = {
.fault = ocfs2_fault,
.page_mkwrite = ocfs2_page_mkwrite,
};
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/highmem.h>
-#include <linux/utsname.h>
#include <linux/init.h>
#include <linux/random.h>
#include <linux/statfs.h>
}
#endif /* CONFIG_DEBUG_FS */
-static struct file_operations ocfs2_osb_debug_fops = {
+static const struct file_operations ocfs2_osb_debug_fops = {
.open = ocfs2_osb_debug_open,
.release = ocfs2_debug_release,
.read = ocfs2_debug_read,
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/pagemap.h>
-#include <linux/utsname.h>
#include <linux/namei.h>
#define MLOG_MASK_PREFIX ML_NAMEI
.rmdir = omfs_rmdir,
};
-struct file_operations omfs_dir_operations = {
+const struct file_operations omfs_dir_operations = {
.read = generic_read_dir,
.readdir = omfs_readdir,
.llseek = generic_file_llseek,
return generic_block_bmap(mapping, block, omfs_get_block);
}
-struct file_operations omfs_file_operations = {
+const struct file_operations omfs_file_operations = {
.llseek = generic_file_llseek,
.read = do_sync_read,
.write = do_sync_write,
extern int omfs_clear_range(struct super_block *sb, u64 block, int count);
/* dir.c */
-extern struct file_operations omfs_dir_operations;
+extern const struct file_operations omfs_dir_operations;
extern const struct inode_operations omfs_dir_inops;
extern int omfs_make_empty(struct inode *inode, struct super_block *sb);
extern int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header,
u64 fsblock);
/* file.c */
-extern struct file_operations omfs_file_operations;
+extern const struct file_operations omfs_file_operations;
extern const struct inode_operations omfs_file_inops;
extern const struct address_space_operations omfs_aops;
extern void omfs_make_empty_table(struct buffer_head *bh, int offset);
static int
pipe_read_open(struct inode *inode, struct file *filp)
{
- /* We could have perhaps used atomic_t, but this and friends
- below are the only places. So it doesn't seem worthwhile. */
+ int ret = -ENOENT;
+
mutex_lock(&inode->i_mutex);
- inode->i_pipe->readers++;
+
+ if (inode->i_pipe) {
+ ret = 0;
+ inode->i_pipe->readers++;
+ }
+
mutex_unlock(&inode->i_mutex);
- return 0;
+ return ret;
}
static int
pipe_write_open(struct inode *inode, struct file *filp)
{
+ int ret = -ENOENT;
+
mutex_lock(&inode->i_mutex);
- inode->i_pipe->writers++;
+
+ if (inode->i_pipe) {
+ ret = 0;
+ inode->i_pipe->writers++;
+ }
+
mutex_unlock(&inode->i_mutex);
- return 0;
+ return ret;
}
static int
pipe_rdwr_open(struct inode *inode, struct file *filp)
{
+ int ret = -ENOENT;
+
mutex_lock(&inode->i_mutex);
- if (filp->f_mode & FMODE_READ)
- inode->i_pipe->readers++;
- if (filp->f_mode & FMODE_WRITE)
- inode->i_pipe->writers++;
+
+ if (inode->i_pipe) {
+ ret = 0;
+ if (filp->f_mode & FMODE_READ)
+ inode->i_pipe->readers++;
+ if (filp->f_mode & FMODE_WRITE)
+ inode->i_pipe->writers++;
+ }
+
mutex_unlock(&inode->i_mutex);
- return 0;
+ return ret;
}
/*
p->nivcsw);
}
+#ifdef CONFIG_MMU
+
struct stack_stats {
struct vm_area_struct *vma;
unsigned long startpage;
mmput(mm);
}
}
+#else
+static void task_show_stack_usage(struct seq_file *m, struct task_struct *task)
+{
+}
+#endif /* CONFIG_MMU */
int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
#include <asm/io.h>
#include <linux/list.h>
#include <linux/ioport.h>
-#include <linux/mm.h>
#include <linux/memory.h>
#include <asm/sections.h>
"Committed_AS: %8lu kB\n"
"VmallocTotal: %8lu kB\n"
"VmallocUsed: %8lu kB\n"
- "VmallocChunk: %8lu kB\n",
+ "VmallocChunk: %8lu kB\n"
+#ifdef CONFIG_MEMORY_FAILURE
+ "HardwareCorrupted: %5lu kB\n"
+#endif
+ ,
K(i.totalram),
K(i.freeram),
K(i.bufferram),
(unsigned long)VMALLOC_TOTAL >> 10,
vmi.used >> 10,
vmi.largest_chunk >> 10
+#ifdef CONFIG_MEMORY_FAILURE
+ ,atomic_long_read(&mce_bad_pages) << (PAGE_SHIFT - 10)
+#endif
);
hugetlb_report_meminfo(m);
#define KPF_COMPOUND_TAIL 16
#define KPF_HUGE 17
#define KPF_UNEVICTABLE 18
+#define KPF_HWPOISON 19
#define KPF_NOPAGE 20
#define KPF_KSM 21
u |= kpf_copy_bit(k, KPF_UNEVICTABLE, PG_unevictable);
u |= kpf_copy_bit(k, KPF_MLOCKED, PG_mlocked);
+#ifdef CONFIG_MEMORY_FAILURE
+ u |= kpf_copy_bit(k, KPF_HWPOISON, PG_hwpoison);
+#endif
+
#ifdef CONFIG_IA64_UNCACHED_ALLOCATOR
u |= kpf_copy_bit(k, KPF_UNCACHED, PG_uncached);
#endif
/* careful: calling conventions are nasty here */
res = count;
- error = table->proc_handler(table, write, filp, buf, &res, ppos);
+ error = table->proc_handler(table, write, buf, &res, ppos);
if (!error)
error = res;
out:
#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/time.h>
+#include <linux/kernel_stat.h>
#include <asm/cputime.h>
static int uptime_proc_show(struct seq_file *m, void *v)
{
struct timespec uptime;
struct timespec idle;
- cputime_t idletime = cputime_add(init_task.utime, init_task.stime);
+ int i;
+ cputime_t idletime = cputime_zero;
+
+ for_each_possible_cpu(i)
+ idletime = cputime64_add(idletime, kstat_cpu(i).cpustat.idle);
do_posix_clock_monotonic_gettime(&uptime);
monotonic_to_bootbased(&uptime);
/* make various checks */
order = get_order(newsize);
if (unlikely(order >= MAX_ORDER))
- goto too_big;
+ return -EFBIG;
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && newsize > limit)
- goto fsize_exceeded;
-
- if (newsize > inode->i_sb->s_maxbytes)
- goto too_big;
+ ret = inode_newsize_ok(inode, newsize);
+ if (ret)
+ return ret;
i_size_write(inode, newsize);
return 0;
- fsize_exceeded:
- send_sig(SIGXFSZ, current, 0);
- too_big:
- return -EFBIG;
-
- add_error:
+add_error:
while (loop < npages)
__free_page(pages + loop++);
return ret;
max = min(in_inode->i_sb->s_maxbytes, out_inode->i_sb->s_maxbytes);
pos = *ppos;
- retval = -EINVAL;
- if (unlikely(pos < 0))
- goto fput_out;
if (unlikely(pos + count > max)) {
retval = -EOVERFLOW;
if (pos >= max)
#ifdef CONFIG_ROMFS_ON_MTD
if (sb->s_mtd)
- return romfs_mtd_strnlen(sb, pos, limit);
+ return romfs_mtd_strnlen(sb, pos, maxlen);
#endif
#ifdef CONFIG_ROMFS_ON_BLOCK
if (sb->s_bdev)
- return romfs_blk_strnlen(sb, pos, limit);
+ return romfs_blk_strnlen(sb, pos, maxlen);
#endif
return -EIO;
}
pos = (ROMFH_SIZE + len + 1 + ROMFH_PAD) & ROMFH_MASK;
root = romfs_iget(sb, pos);
- if (!root)
+ if (IS_ERR(root))
goto error;
sb->s_root = d_alloc_root(root);
*/
#include <linux/kernel.h>
+#include <linux/sched.h>
#include <linux/syscalls.h>
#include <linux/module.h>
#include <linux/slab.h>
*/
int seq_path(struct seq_file *m, struct path *path, char *esc)
{
- if (m->count < m->size) {
- char *s = m->buf + m->count;
- char *p = d_path(path, s, m->size - m->count);
+ char *buf;
+ size_t size = seq_get_buf(m, &buf);
+ int res = -1;
+
+ if (size) {
+ char *p = d_path(path, buf, size);
if (!IS_ERR(p)) {
- s = mangle_path(s, p, esc);
- if (s) {
- p = m->buf + m->count;
- m->count = s - m->buf;
- return s - p;
- }
+ char *end = mangle_path(buf, p, esc);
+ if (end)
+ res = end - buf;
}
}
- m->count = m->size;
- return -1;
+ seq_commit(m, res);
+
+ return res;
}
EXPORT_SYMBOL(seq_path);
int seq_path_root(struct seq_file *m, struct path *path, struct path *root,
char *esc)
{
- int err = -ENAMETOOLONG;
- if (m->count < m->size) {
- char *s = m->buf + m->count;
+ char *buf;
+ size_t size = seq_get_buf(m, &buf);
+ int res = -ENAMETOOLONG;
+
+ if (size) {
char *p;
spin_lock(&dcache_lock);
- p = __d_path(path, root, s, m->size - m->count);
+ p = __d_path(path, root, buf, size);
spin_unlock(&dcache_lock);
- err = PTR_ERR(p);
+ res = PTR_ERR(p);
if (!IS_ERR(p)) {
- s = mangle_path(s, p, esc);
- if (s) {
- p = m->buf + m->count;
- m->count = s - m->buf;
- return 0;
- }
+ char *end = mangle_path(buf, p, esc);
+ if (end)
+ res = end - buf;
+ else
+ res = -ENAMETOOLONG;
}
}
- m->count = m->size;
- return err;
+ seq_commit(m, res);
+
+ return res < 0 ? res : 0;
}
/*
*/
int seq_dentry(struct seq_file *m, struct dentry *dentry, char *esc)
{
- if (m->count < m->size) {
- char *s = m->buf + m->count;
- char *p = dentry_path(dentry, s, m->size - m->count);
+ char *buf;
+ size_t size = seq_get_buf(m, &buf);
+ int res = -1;
+
+ if (size) {
+ char *p = dentry_path(dentry, buf, size);
if (!IS_ERR(p)) {
- s = mangle_path(s, p, esc);
- if (s) {
- p = m->buf + m->count;
- m->count = s - m->buf;
- return s - p;
- }
+ char *end = mangle_path(buf, p, esc);
+ if (end)
+ res = end - buf;
}
}
- m->count = m->size;
- return -1;
+ seq_commit(m, res);
+
+ return res;
}
int seq_bitmap(struct seq_file *m, const unsigned long *bits,
static void
smb_unload_nls(struct smb_sb_info *server)
{
- if (server->remote_nls) {
- unload_nls(server->remote_nls);
- server->remote_nls = NULL;
- }
- if (server->local_nls) {
- unload_nls(server->local_nls);
- server->local_nls = NULL;
- }
+ unload_nls(server->remote_nls);
+ unload_nls(server->local_nls);
}
static void
}
EXPORT_SYMBOL(get_super);
+
+/**
+ * get_active_super - get an active reference to the superblock of a device
+ * @bdev: device to get the superblock for
+ *
+ * Scans the superblock list and finds the superblock of the file system
+ * mounted on the device given. Returns the superblock with an active
+ * reference and s_umount held exclusively or %NULL if none was found.
+ */
+struct super_block *get_active_super(struct block_device *bdev)
+{
+ struct super_block *sb;
+
+ if (!bdev)
+ return NULL;
+
+ spin_lock(&sb_lock);
+ list_for_each_entry(sb, &super_blocks, s_list) {
+ if (sb->s_bdev != bdev)
+ continue;
+
+ sb->s_count++;
+ spin_unlock(&sb_lock);
+ down_write(&sb->s_umount);
+ if (sb->s_root) {
+ spin_lock(&sb_lock);
+ if (sb->s_count > S_BIAS) {
+ atomic_inc(&sb->s_active);
+ sb->s_count--;
+ spin_unlock(&sb_lock);
+ return sb;
+ }
+ spin_unlock(&sb_lock);
+ }
+ up_write(&sb->s_umount);
+ put_super(sb);
+ yield();
+ spin_lock(&sb_lock);
+ }
+ spin_unlock(&sb_lock);
+ return NULL;
+}
struct super_block * user_get_super(dev_t dev)
{
{
int retval;
int remount_rw;
-
+
+ if (sb->s_frozen != SB_UNFROZEN)
+ return -EBUSY;
+
#ifdef CONFIG_BLOCK
if (!(flags & MS_RDONLY) && bdev_read_only(sb->s_bdev))
return -EACCES;
#endif
+
if (flags & MS_RDONLY)
acct_auto_close(sb);
shrink_dcache_sb(sb);
* will protect the lockfs code from trying to start a snapshot
* while we are mounting
*/
- down(&bdev->bd_mount_sem);
+ mutex_lock(&bdev->bd_fsfreeze_mutex);
+ if (bdev->bd_fsfreeze_count > 0) {
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
+ error = -EBUSY;
+ goto error_bdev;
+ }
s = sget(fs_type, test_bdev_super, set_bdev_super, bdev);
- up(&bdev->bd_mount_sem);
+ mutex_unlock(&bdev->bd_fsfreeze_mutex);
if (IS_ERR(s))
goto error_s;
if (error)
goto out_sb;
+ /*
+ * filesystems should never set s_maxbytes larger than MAX_LFS_FILESIZE
+ * but s_maxbytes was an unsigned long long for many releases. Throw
+ * this warning for a little while to try and catch filesystems that
+ * violate this rule. This warning should be either removed or
+ * converted to a BUG() in 2.6.34.
+ */
+ WARN((mnt->mnt_sb->s_maxbytes < 0), "%s set sb->s_maxbytes to "
+ "negative value (%lld)\n", type->name, mnt->mnt_sb->s_maxbytes);
+
mnt->mnt_mountpoint = mnt->mnt_root;
mnt->mnt_parent = mnt;
up_write(&mnt->mnt_sb->s_umount);
struct mutex mutex;
void *buffer;
int mmapped;
- struct vm_operations_struct *vm_ops;
+ const struct vm_operations_struct *vm_ops;
struct file *file;
struct hlist_node list;
};
}
#endif
-static struct vm_operations_struct bin_vm_ops = {
+static const struct vm_operations_struct bin_vm_ops = {
.open = bin_vma_open,
.close = bin_vma_close,
.fault = bin_fault,
#include <linux/completion.h>
#include <linux/mutex.h>
#include <linux/slab.h>
+#include <linux/security.h>
#include "sysfs.h"
DEFINE_MUTEX(sysfs_mutex);
sysfs_put(sd->s_symlink.target_sd);
if (sysfs_type(sd) & SYSFS_COPY_NAME)
kfree(sd->s_name);
+ if (sd->s_iattr && sd->s_iattr->ia_secdata)
+ security_release_secctx(sd->s_iattr->ia_secdata,
+ sd->s_iattr->ia_secdata_len);
kfree(sd->s_iattr);
sysfs_free_ino(sd->s_ino);
kmem_cache_free(sysfs_dir_cachep, sd);
mutex_lock(&sysfs_rename_mutex);
BUG_ON(!sd->s_parent);
- new_parent_sd = new_parent_kobj->sd ? new_parent_kobj->sd : &sysfs_root;
+ new_parent_sd = (new_parent_kobj && new_parent_kobj->sd) ?
+ new_parent_kobj->sd : &sysfs_root;
error = 0;
if (sd->s_parent == new_parent_sd)
struct sysfs_open_dirent *od, *new_od = NULL;
retry:
- spin_lock(&sysfs_open_dirent_lock);
+ spin_lock_irq(&sysfs_open_dirent_lock);
if (!sd->s_attr.open && new_od) {
sd->s_attr.open = new_od;
list_add_tail(&buffer->list, &od->buffers);
}
- spin_unlock(&sysfs_open_dirent_lock);
+ spin_unlock_irq(&sysfs_open_dirent_lock);
if (od) {
kfree(new_od);
struct sysfs_buffer *buffer)
{
struct sysfs_open_dirent *od = sd->s_attr.open;
+ unsigned long flags;
- spin_lock(&sysfs_open_dirent_lock);
+ spin_lock_irqsave(&sysfs_open_dirent_lock, flags);
list_del(&buffer->list);
if (atomic_dec_and_test(&od->refcnt))
else
od = NULL;
- spin_unlock(&sysfs_open_dirent_lock);
+ spin_unlock_irqrestore(&sysfs_open_dirent_lock, flags);
kfree(od);
}
void sysfs_notify_dirent(struct sysfs_dirent *sd)
{
struct sysfs_open_dirent *od;
+ unsigned long flags;
- spin_lock(&sysfs_open_dirent_lock);
+ spin_lock_irqsave(&sysfs_open_dirent_lock, flags);
od = sd->s_attr.open;
if (od) {
wake_up_interruptible(&od->poll);
}
- spin_unlock(&sysfs_open_dirent_lock);
+ spin_unlock_irqrestore(&sysfs_open_dirent_lock, flags);
}
EXPORT_SYMBOL_GPL(sysfs_notify_dirent);
return err;
}
-static struct vm_operations_struct ubifs_file_vm_ops = {
+static const struct vm_operations_struct ubifs_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = ubifs_vm_page_mkwrite,
};
mempool_free(ioend, xfs_ioend_pool);
}
+/*
+ * If the end of the current ioend is beyond the current EOF,
+ * return the new EOF value, otherwise zero.
+ */
+STATIC xfs_fsize_t
+xfs_ioend_new_eof(
+ xfs_ioend_t *ioend)
+{
+ xfs_inode_t *ip = XFS_I(ioend->io_inode);
+ xfs_fsize_t isize;
+ xfs_fsize_t bsize;
+
+ bsize = ioend->io_offset + ioend->io_size;
+ isize = MAX(ip->i_size, ip->i_new_size);
+ isize = MIN(isize, bsize);
+ return isize > ip->i_d.di_size ? isize : 0;
+}
+
/*
* Update on-disk file size now that data has been written to disk.
* The current in-memory file size is i_size. If a write is beyond
* updated. If this write does not extend all the way to the valid
* file size then restrict this update to the end of the write.
*/
+
STATIC void
xfs_setfilesize(
xfs_ioend_t *ioend)
{
xfs_inode_t *ip = XFS_I(ioend->io_inode);
xfs_fsize_t isize;
- xfs_fsize_t bsize;
ASSERT((ip->i_d.di_mode & S_IFMT) == S_IFREG);
ASSERT(ioend->io_type != IOMAP_READ);
if (unlikely(ioend->io_error))
return;
- bsize = ioend->io_offset + ioend->io_size;
-
xfs_ilock(ip, XFS_ILOCK_EXCL);
-
- isize = MAX(ip->i_size, ip->i_new_size);
- isize = MIN(isize, bsize);
-
- if (ip->i_d.di_size < isize) {
+ isize = xfs_ioend_new_eof(ioend);
+ if (isize) {
ip->i_d.di_size = isize;
- ip->i_update_core = 1;
xfs_mark_inode_dirty_sync(ip);
}
struct bio *bio)
{
atomic_inc(&ioend->io_remaining);
-
bio->bi_private = ioend;
bio->bi_end_io = xfs_end_bio;
+ /*
+ * If the I/O is beyond EOF we mark the inode dirty immediately
+ * but don't update the inode size until I/O completion.
+ */
+ if (xfs_ioend_new_eof(ioend))
+ xfs_mark_inode_dirty_sync(XFS_I(ioend->io_inode));
+
submit_bio(WRITE, bio);
ASSERT(!bio_flagged(bio, BIO_EOPNOTSUPP));
bio_put(bio);
.direct_IO = xfs_vm_direct_IO,
.migratepage = buffer_migrate_page,
.is_partially_uptodate = block_is_partially_uptodate,
+ .error_remove_page = generic_error_remove_page,
};
#include <linux/dcache.h>
-static struct vm_operations_struct xfs_file_vm_ops;
+static const struct vm_operations_struct xfs_file_vm_ops;
STATIC ssize_t
xfs_file_aio_read(
struct dentry *dentry,
int datasync)
{
- struct inode *inode = dentry->d_inode;
- struct xfs_inode *ip = XFS_I(inode);
- int error;
-
- /* capture size updates in I/O completion before writing the inode. */
- error = filemap_fdatawait(inode->i_mapping);
- if (error)
- return error;
+ struct xfs_inode *ip = XFS_I(dentry->d_inode);
xfs_iflags_clear(ip, XFS_ITRUNCATED);
return -xfs_fsync(ip);
.fsync = xfs_file_fsync,
};
-static struct vm_operations_struct xfs_file_vm_ops = {
+static const struct vm_operations_struct xfs_file_vm_ops = {
.fault = filemap_fault,
.page_mkwrite = xfs_vm_page_mkwrite,
};
#include <linux/fiemap.h>
/*
- * Bring the atime in the XFS inode uptodate.
- * Used before logging the inode to disk or when the Linux inode goes away.
+ * Bring the timestamps in the XFS inode uptodate.
+ *
+ * Used before writing the inode to disk.
*/
void
-xfs_synchronize_atime(
+xfs_synchronize_times(
xfs_inode_t *ip)
{
struct inode *inode = VFS_I(ip);
- if (!(inode->i_state & I_CLEAR)) {
- ip->i_d.di_atime.t_sec = (__int32_t)inode->i_atime.tv_sec;
- ip->i_d.di_atime.t_nsec = (__int32_t)inode->i_atime.tv_nsec;
- }
+ ip->i_d.di_atime.t_sec = (__int32_t)inode->i_atime.tv_sec;
+ ip->i_d.di_atime.t_nsec = (__int32_t)inode->i_atime.tv_nsec;
+ ip->i_d.di_ctime.t_sec = (__int32_t)inode->i_ctime.tv_sec;
+ ip->i_d.di_ctime.t_nsec = (__int32_t)inode->i_ctime.tv_nsec;
+ ip->i_d.di_mtime.t_sec = (__int32_t)inode->i_mtime.tv_sec;
+ ip->i_d.di_mtime.t_nsec = (__int32_t)inode->i_mtime.tv_nsec;
}
/*
if ((flags & XFS_ICHGTIME_MOD) &&
!timespec_equal(&inode->i_mtime, &tv)) {
inode->i_mtime = tv;
- ip->i_d.di_mtime.t_sec = (__int32_t)tv.tv_sec;
- ip->i_d.di_mtime.t_nsec = (__int32_t)tv.tv_nsec;
sync_it = 1;
}
if ((flags & XFS_ICHGTIME_CHG) &&
!timespec_equal(&inode->i_ctime, &tv)) {
inode->i_ctime = tv;
- ip->i_d.di_ctime.t_sec = (__int32_t)tv.tv_sec;
- ip->i_d.di_ctime.t_nsec = (__int32_t)tv.tv_nsec;
sync_it = 1;
}
/*
- * We update the i_update_core field _after_ changing
- * the timestamps in order to coordinate properly with
- * xfs_iflush() so that we don't lose timestamp updates.
- * This keeps us from having to hold the inode lock
- * while doing this. We use the SYNCHRONIZE macro to
- * ensure that the compiler does not reorder the update
- * of i_update_core above the timestamp updates above.
+ * Update complete - now make sure everyone knows that the inode
+ * is dirty.
*/
- if (sync_it) {
- SYNCHRONIZE();
- ip->i_update_core = 1;
+ if (sync_it)
xfs_mark_inode_dirty_sync(ip);
- }
}
/*
stat->gid = ip->i_d.di_gid;
stat->ino = ip->i_ino;
stat->atime = inode->i_atime;
- stat->mtime.tv_sec = ip->i_d.di_mtime.t_sec;
- stat->mtime.tv_nsec = ip->i_d.di_mtime.t_nsec;
- stat->ctime.tv_sec = ip->i_d.di_ctime.t_sec;
- stat->ctime.tv_nsec = ip->i_d.di_ctime.t_nsec;
+ stat->mtime = inode->i_mtime;
+ stat->ctime = inode->i_ctime;
stat->blocks =
XFS_FSB_TO_BB(mp, ip->i_d.di_nblocks + ip->i_delayed_blks);
xip->i_new_size = new_size;
if (likely(!(ioflags & IO_INVIS)))
- xfs_ichgtime(xip, XFS_ICHGTIME_MOD | XFS_ICHGTIME_CHG);
+ file_update_time(file);
/*
* If the offset is beyond the size of the file, we have a couple
if (sb->s_flags & MS_RDONLY)
return -EROFS;
- if (!XFS_IS_QUOTA_RUNNING(mp))
+ if (op != Q_XQUOTARM && !XFS_IS_QUOTA_RUNNING(mp))
return -ENOSYS;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
mrlock_init(&ip->i_iolock, MRLOCK_BARRIER, "xfsio", ip->i_ino);
}
+/*
+ * Dirty the XFS inode when mark_inode_dirty_sync() is called so that
+ * we catch unlogged VFS level updates to the inode. Care must be taken
+ * here - the transaction code calls mark_inode_dirty_sync() to mark the
+ * VFS inode dirty in a transaction and clears the i_update_core field;
+ * it must clear the field after calling mark_inode_dirty_sync() to
+ * correctly indicate that the dirty state has been propagated into the
+ * inode log item.
+ *
+ * We need the barrier() to maintain correct ordering between unlogged
+ * updates and the transaction commit code that clears the i_update_core
+ * field. This requires all updates to be completed before marking the
+ * inode dirty.
+ */
+STATIC void
+xfs_fs_dirty_inode(
+ struct inode *inode)
+{
+ barrier();
+ XFS_I(inode)->i_update_core = 1;
+}
+
/*
* Attempt to flush the inode, this will actually fail
* if the inode is pinned, but we dirty the inode again
}
STATIC int
-xfs_fs_sync_super(
+xfs_fs_sync_fs(
struct super_block *sb,
int wait)
{
int error;
/*
- * Treat a sync operation like a freeze. This is to work
- * around a race in sync_inodes() which works in two phases
- * - an asynchronous flush, which can write out an inode
- * without waiting for file size updates to complete, and a
- * synchronous flush, which wont do anything because the
- * async flush removed the inode's dirty flag. Also
- * sync_inodes() will not see any files that just have
- * outstanding transactions to be flushed because we don't
- * dirty the Linux inode until after the transaction I/O
- * completes.
+ * Not much we can do for the first async pass. Writing out the
+ * superblock would be counter-productive as we are going to redirty
+ * when writing out other data and metadata (and writing out a single
+ * block is quite fast anyway).
+ *
+ * Try to asynchronously kick off quota syncing at least.
*/
- if (wait || unlikely(sb->s_frozen == SB_FREEZE_WRITE))
- error = xfs_quiesce_data(mp);
- else
- error = xfs_sync_fsdata(mp, 0);
+ if (!wait) {
+ xfs_qm_sync(mp, SYNC_TRYLOCK);
+ return 0;
+ }
+
+ error = xfs_quiesce_data(mp);
+ if (error)
+ return -error;
- if (unlikely(laptop_mode)) {
+ if (laptop_mode) {
int prev_sync_seq = mp->m_sync_seq;
/*
mp->m_sync_seq != prev_sync_seq);
}
- return -error;
+ return 0;
}
STATIC int
static const struct super_operations xfs_super_operations = {
.alloc_inode = xfs_fs_alloc_inode,
.destroy_inode = xfs_fs_destroy_inode,
+ .dirty_inode = xfs_fs_dirty_inode,
.write_inode = xfs_fs_write_inode,
.clear_inode = xfs_fs_clear_inode,
.put_super = xfs_fs_put_super,
- .sync_fs = xfs_fs_sync_super,
+ .sync_fs = xfs_fs_sync_fs,
.freeze_fs = xfs_fs_freeze,
.statfs = xfs_fs_statfs,
.remount_fs = xfs_fs_remount,
STATIC int
xfs_commit_dummy_trans(
struct xfs_mount *mp,
- uint log_flags)
+ uint flags)
{
struct xfs_inode *ip = mp->m_rootip;
struct xfs_trans *tp;
int error;
+ int log_flags = XFS_LOG_FORCE;
+
+ if (flags & SYNC_WAIT)
+ log_flags |= XFS_LOG_SYNC;
/*
* Put a dummy transaction in the log to tell recovery
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_ihold(tp, ip);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- /* XXX(hch): ignoring the error here.. */
error = xfs_trans_commit(tp, 0);
-
xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ /* the log force ensures this transaction is pushed to disk */
xfs_log_force(mp, 0, log_flags);
- return 0;
+ return error;
}
int
else
XFS_BUF_ASYNC(bp);
- return xfs_bwrite(mp, bp);
+ error = xfs_bwrite(mp, bp);
+ if (error)
+ return error;
+
+ /*
+ * If this is a data integrity sync make sure all pending buffers
+ * are flushed out for the log coverage check below.
+ */
+ if (flags & SYNC_WAIT)
+ xfs_flush_buftarg(mp->m_ddev_targp, 1);
+
+ if (xfs_log_need_covered(mp))
+ error = xfs_commit_dummy_trans(mp, flags);
+ return error;
out_brelse:
xfs_buf_relse(bp);
/* push non-blocking */
xfs_sync_data(mp, 0);
xfs_qm_sync(mp, SYNC_TRYLOCK);
- xfs_filestream_flush(mp);
- /* push and block */
+ /* push and block till complete */
xfs_sync_data(mp, SYNC_WAIT);
xfs_qm_sync(mp, SYNC_WAIT);
+ /* drop inode references pinned by filestreams */
+ xfs_filestream_flush(mp);
+
/* write superblock and hoover up shutdown errors */
- error = xfs_sync_fsdata(mp, 0);
+ error = xfs_sync_fsdata(mp, SYNC_WAIT);
/* flush data-only devices */
if (mp->m_rtdev_targp)
/* dgc: errors ignored here */
error = xfs_qm_sync(mp, SYNC_TRYLOCK);
error = xfs_sync_fsdata(mp, SYNC_TRYLOCK);
- if (xfs_log_need_covered(mp))
- error = xfs_commit_dummy_trans(mp, XFS_LOG_FORCE);
}
mp->m_sync_seq++;
wake_up(&mp->m_wait_single_sync_task);
xfs_stats_clear_proc_handler(
ctl_table *ctl,
int write,
- struct file *filp,
void __user *buffer,
size_t *lenp,
loff_t *ppos)
int c, ret, *valp = ctl->data;
__uint32_t vn_active;
- ret = proc_dointvec_minmax(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(ctl, write, buffer, lenp, ppos);
if (!ret && write && *valp) {
printk("XFS Clearing xfsstats\n");
ip->i_gdquot = NULL;
}
xfs_iput(ip, XFS_ILOCK_EXCL);
- IRELE(ip);
return 0;
}
* process that the file was not changed out from
* under it.
*/
- if ((sbp->bs_ctime.tv_sec != ip->i_d.di_ctime.t_sec) ||
- (sbp->bs_ctime.tv_nsec != ip->i_d.di_ctime.t_nsec) ||
- (sbp->bs_mtime.tv_sec != ip->i_d.di_mtime.t_sec) ||
- (sbp->bs_mtime.tv_nsec != ip->i_d.di_mtime.t_nsec)) {
+ if ((sbp->bs_ctime.tv_sec != VFS_I(ip)->i_ctime.tv_sec) ||
+ (sbp->bs_ctime.tv_nsec != VFS_I(ip)->i_ctime.tv_nsec) ||
+ (sbp->bs_mtime.tv_sec != VFS_I(ip)->i_mtime.tv_sec) ||
+ (sbp->bs_mtime.tv_nsec != VFS_I(ip)->i_mtime.tv_nsec)) {
error = XFS_ERROR(EBUSY);
goto out_unlock;
}
*/
ra_want = howmany(bufsize + mp->m_dirblksize,
mp->m_sb.sb_blocksize) - 1;
+ ASSERT(ra_want >= 0);
/*
* If we don't have as many as we want, and we haven't
*/
ptr += length;
curoff += length;
- bufsize -= length;
+ /* bufsize may have just been a guess; don't go negative */
+ bufsize = bufsize > length ? bufsize - length : 0;
}
/*
* Not in range - save last search
* location and allocate a new inode
*/
+ xfs_btree_del_cursor(tcur, XFS_BTREE_NOERROR);
pag->pagl_leftrec = trec.ir_startino;
pag->pagl_rightrec = rec.ir_startino;
pag->pagl_pagino = pagino;
SYNCHRONIZE();
/*
- * Make sure to get the latest atime from the Linux inode.
+ * Make sure to get the latest timestamps from the Linux inode.
*/
- xfs_synchronize_atime(ip);
+ xfs_synchronize_times(ip);
if (XFS_TEST_ERROR(be16_to_cpu(dip->di_magic) != XFS_DINODE_MAGIC,
mp, XFS_ERRTAG_IFLUSH_1, XFS_RANDOM_IFLUSH_1)) {
void xfs_lock_inodes(xfs_inode_t **, int, uint);
void xfs_lock_two_inodes(xfs_inode_t *, xfs_inode_t *, uint);
-void xfs_synchronize_atime(xfs_inode_t *);
+void xfs_synchronize_times(xfs_inode_t *);
void xfs_mark_inode_dirty_sync(xfs_inode_t *);
#if defined(XFS_INODE_TRACE)
vecp++;
nvecs = 1;
+ /*
+ * Make sure the linux inode is dirty. We do this before
+ * clearing i_update_core as the VFS will call back into
+ * XFS here and set i_update_core, so we need to dirty the
+ * inode first so that the ordering of i_update_core and
+ * unlogged modifications still works as described below.
+ */
+ xfs_mark_inode_dirty_sync(ip);
+
/*
* Clear i_update_core if the timestamps (or any other
* non-transactional modification) need flushing/logging
}
/*
- * Make sure to get the latest atime from the Linux inode.
+ * Make sure to get the latest timestamps from the Linux inode.
*/
- xfs_synchronize_atime(ip);
-
- /*
- * make sure the linux inode is dirty
- */
- xfs_mark_inode_dirty_sync(ip);
+ xfs_synchronize_times(ip);
vecp->i_addr = (xfs_caddr_t)&ip->i_d;
vecp->i_len = sizeof(struct xfs_icdinode);
{
xfs_icdinode_t *dic; /* dinode core info pointer */
xfs_inode_t *ip; /* incore inode pointer */
+ struct inode *inode;
int error;
error = xfs_iget(mp, NULL, ino,
ASSERT(ip->i_imap.im_blkno != 0);
dic = &ip->i_d;
+ inode = VFS_I(ip);
/* xfs_iget returns the following without needing
* further change.
buf->bs_uid = dic->di_uid;
buf->bs_gid = dic->di_gid;
buf->bs_size = dic->di_size;
+
/*
- * We are reading the atime from the Linux inode because the
- * dinode might not be uptodate.
+ * We need to read the timestamps from the Linux inode because
+ * the VFS keeps writing directly into the inode structure instead
+ * of telling us about the updates.
*/
- buf->bs_atime.tv_sec = VFS_I(ip)->i_atime.tv_sec;
- buf->bs_atime.tv_nsec = VFS_I(ip)->i_atime.tv_nsec;
- buf->bs_mtime.tv_sec = dic->di_mtime.t_sec;
- buf->bs_mtime.tv_nsec = dic->di_mtime.t_nsec;
- buf->bs_ctime.tv_sec = dic->di_ctime.t_sec;
- buf->bs_ctime.tv_nsec = dic->di_ctime.t_nsec;
+ buf->bs_atime.tv_sec = inode->i_atime.tv_sec;
+ buf->bs_atime.tv_nsec = inode->i_atime.tv_nsec;
+ buf->bs_mtime.tv_sec = inode->i_mtime.tv_sec;
+ buf->bs_mtime.tv_nsec = inode->i_mtime.tv_nsec;
+ buf->bs_ctime.tv_sec = inode->i_ctime.tv_sec;
+ buf->bs_ctime.tv_nsec = inode->i_ctime.tv_nsec;
+
buf->bs_xflags = xfs_ip2xflags(ip);
buf->bs_extsize = dic->di_extsize << mp->m_sb.sb_blocklog;
buf->bs_extents = dic->di_nextents;
ASSERT(XFS_FORCED_SHUTDOWN(ip->i_mount) || ip->i_delayed_blks == 0);
- /*
- * Make sure the atime in the XFS inode is correct before freeing the
- * Linux inode.
- */
- xfs_synchronize_atime(ip);
-
/*
* If we have nothing to flush with this inode then complete the
* teardown now, otherwise break the link between the xfs inode and the
ACPI_BUS_TYPE_POWER,
ACPI_BUS_TYPE_PROCESSOR,
ACPI_BUS_TYPE_THERMAL,
- ACPI_BUS_TYPE_SYSTEM,
ACPI_BUS_TYPE_POWER_BUTTON,
ACPI_BUS_TYPE_SLEEP_BUTTON,
ACPI_BUS_DEVICE_TYPE_COUNT
struct acpi_device_flags {
u32 dynamic_status:1;
- u32 hardware_id:1;
- u32 compatible_ids:1;
u32 bus_address:1;
- u32 unique_id:1;
u32 removable:1;
u32 ejectable:1;
u32 lockable:1;
u32 performance_manageable:1;
u32 wake_capable:1; /* Wakeup(_PRW) supported? */
u32 force_power_state:1;
- u32 reserved:19;
+ u32 reserved:22;
};
/* File System */
typedef char acpi_device_name[40];
typedef char acpi_device_class[20];
+struct acpi_hardware_id {
+ struct list_head list;
+ char *id;
+};
+
struct acpi_device_pnp {
acpi_bus_id bus_id; /* Object name */
acpi_bus_address bus_address; /* _ADR */
- char *hardware_id; /* _HID */
- struct acpica_device_id_list *cid_list; /* _CIDs */
char *unique_id; /* _UID */
+ struct list_head ids; /* _HID and _CIDs */
acpi_device_name device_name; /* Driver-determined */
acpi_device_class device_class; /* " */
};
#define acpi_device_bid(d) ((d)->pnp.bus_id)
#define acpi_device_adr(d) ((d)->pnp.bus_address)
-#define acpi_device_hid(d) ((d)->pnp.hardware_id)
-#define acpi_device_uid(d) ((d)->pnp.unique_id)
+char *acpi_device_hid(struct acpi_device *device);
#define acpi_device_name(d) ((d)->pnp.device_name)
#define acpi_device_class(d) ((d)->pnp.device_class)
/* Device */
struct acpi_device {
- acpi_handle handle;
+ int device_type;
+ acpi_handle handle; /* no handle for fixed hardware */
struct acpi_device *parent;
struct list_head children;
struct list_head node;
int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
void acpi_bus_data_handler(acpi_handle handle, void *context);
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+ unsigned long long *sta);
int acpi_bus_get_status(struct acpi_device *device);
int acpi_bus_get_power(acpi_handle handle, int *state);
int acpi_bus_set_power(acpi_handle handle, int state);
--- /dev/null
+#ifndef ACPI_BUTTON_H
+#define ACPI_BUTTON_H
+
+#include <linux/notifier.h>
+
+#if defined(CONFIG_ACPI_BUTTON) || defined(CONFIG_ACPI_BUTTON_MODULE)
+extern int acpi_lid_notifier_register(struct notifier_block *nb);
+extern int acpi_lid_notifier_unregister(struct notifier_block *nb);
+extern int acpi_lid_open(void);
+#else
+static inline int acpi_lid_notifier_register(struct notifier_block *nb)
+{
+ return 0;
+}
+static inline int acpi_lid_notifier_unregister(struct notifier_block *nb)
+{
+ return 0;
+}
+static inline int acpi_lid_open(void)
+{
+ return 1;
+}
+#endif /* defined(CONFIG_ACPI_BUTTON) || defined(CONFIG_ACPI_BUTTON_MODULE) */
+
+#endif /* ACPI_BUTTON_H */
#define F_SETSIG 10 /* for sockets. */
#define F_GETSIG 11 /* for sockets. */
#endif
+#ifndef F_SETOWN_EX
+#define F_SETOWN_EX 12
+#define F_GETOWN_EX 13
+#endif
+
+#define F_OWNER_TID 0
+#define F_OWNER_PID 1
+#define F_OWNER_GID 2
+
+struct f_owner_ex {
+ int type;
+ pid_t pid;
+};
/* for F_[GET|SET]FL */
#define FD_CLOEXEC 1 /* actually anything with low bit set goes */
#ifndef _ASM_GENERIC_GPIO_H
#define _ASM_GENERIC_GPIO_H
+#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/irq.h>
typedef struct {
- unsigned long __softirq_pending;
+ unsigned int __softirq_pending;
} ____cacheline_aligned irq_cpustat_t;
#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
#define MADV_REMOVE 9 /* remove these pages & resources */
#define MADV_DONTFORK 10 /* don't inherit across fork */
#define MADV_DOFORK 11 /* do inherit across fork */
+#define MADV_HWPOISON 100 /* poison a page for testing */
#define MADV_MERGEABLE 12 /* KSM may merge identical pages */
#define MADV_UNMERGEABLE 13 /* KSM may not merge identical pages */
#ifdef __ARCH_SI_TRAPNO
int _trapno; /* TRAP # which caused the signal */
#endif
+ short _addr_lsb; /* LSB of the reported address */
} _sigfault;
/* SIGPOLL */
#ifdef __ARCH_SI_TRAPNO
#define si_trapno _sifields._sigfault._trapno
#endif
+#define si_addr_lsb _sifields._sigfault._addr_lsb
#define si_band _sifields._sigpoll._band
#define si_fd _sifields._sigpoll._fd
#define BUS_ADRALN (__SI_FAULT|1) /* invalid address alignment */
#define BUS_ADRERR (__SI_FAULT|2) /* non-existant physical address */
#define BUS_OBJERR (__SI_FAULT|3) /* object specific hardware error */
-#define NSIGBUS 3
+/* hardware memory error consumed on a machine check: action required */
+#define BUS_MCEERR_AR (__SI_FAULT|4)
+/* hardware memory error detected in process but not consumed: action optional*/
+#define BUS_MCEERR_AO (__SI_FAULT|5)
+#define NSIGBUS 5
/*
* SIGTRAP si_codes
#ifndef parent_node
#define parent_node(node) ((void)(node),0)
#endif
-#ifndef node_to_cpumask
-#define node_to_cpumask(node) ((void)node, cpu_online_map)
-#endif
#ifndef cpumask_of_node
#define cpumask_of_node(node) ((void)node, cpu_online_mask)
#endif
#endif /* CONFIG_NUMA */
-/*
- * returns pointer to cpumask for specified node
- * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)"
- */
-#ifndef node_to_cpumask_ptr
-
-#define node_to_cpumask_ptr(v, node) \
- cpumask_t _##v = node_to_cpumask(node); \
- const cpumask_t *v = &_##v
-
-#define node_to_cpumask_ptr_next(v, node) \
- _##v = node_to_cpumask(node)
-#endif
-
#endif /* _ASM_GENERIC_TOPOLOGY_H */
. = ALIGN(PAGE_SIZE); \
.data : AT(ADDR(.data) - LOAD_OFFSET) { \
INIT_TASK_DATA(inittask) \
+ NOSAVE_DATA \
+ PAGE_ALIGNED_DATA(pagealigned) \
CACHELINE_ALIGNED_DATA(cacheline) \
READ_MOSTLY_DATA(cacheline) \
DATA_DATA \
CONSTRUCTORS \
- NOSAVE_DATA \
- PAGE_ALIGNED_DATA(pagealigned) \
}
#define INIT_TEXT_SECTION(inittext_align) \
* @get_modes: get mode list for this connector
* @set_property: property for this connector may need update
* @destroy: make object go away
+ * @force: notify the driver the connector is forced on
*
* Each CRTC may have one or more connectors attached to it. The functions
* below allow the core DRM code to control connectors, enumerate available modes,
int (*set_property)(struct drm_connector *connector, struct drm_property *property,
uint64_t val);
void (*destroy)(struct drm_connector *connector);
+ void (*force)(struct drm_connector *connector);
};
struct drm_encoder_funcs {
void *helper_private;
};
+enum drm_connector_force {
+ DRM_FORCE_UNSPECIFIED,
+ DRM_FORCE_OFF,
+ DRM_FORCE_ON, /* force on analog part normally */
+ DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
+};
+
/**
* drm_connector - central DRM connector control structure
* @crtc: CRTC this connector is currently connected to, NULL if none
void *helper_private;
+ /* forced on connector */
+ enum drm_connector_force force;
uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
uint32_t force_encoder_id;
struct drm_encoder *encoder; /* currently active encoder */
+ void *fb_helper_private;
};
/**
extern bool drm_detect_hdmi_monitor(struct edid *edid);
extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
- bool reduced, bool interlaced);
+ bool reduced, bool interlaced, bool margins);
extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool interlaced, int margins);
#include <linux/fb.h>
+#include "drm_fb_helper.h"
struct drm_crtc_helper_funcs {
/*
* Control power levels on the CRTC. If the mode passed in is
/* Move the crtc on the current fb to the given position *optional* */
int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb);
+
+ /* reload the current crtc LUT */
+ void (*load_lut)(struct drm_crtc *crtc);
};
struct drm_encoder_helper_funcs {
encoder->helper_private = (void *)funcs;
}
-static inline void drm_connector_helper_add(struct drm_connector *connector,
+static inline int drm_connector_helper_add(struct drm_connector *connector,
const struct drm_connector_helper_funcs *funcs)
{
connector->helper_private = (void *)funcs;
+ return drm_fb_helper_add_connector(connector);
}
extern int drm_helper_resume_force_mode(struct drm_device *dev);
struct drm_mode_set mode_set;
};
+
struct drm_fb_helper_funcs {
void (*gamma_set)(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno);
+ void (*gamma_get)(struct drm_crtc *crtc, u16 *red, u16 *green,
+ u16 *blue, int regno);
+};
+
+/* mode specified on the command line */
+struct drm_fb_helper_cmdline_mode {
+ bool specified;
+ bool refresh_specified;
+ bool bpp_specified;
+ int xres, yres;
+ int bpp;
+ int refresh;
+ bool rb;
+ bool interlace;
+ bool cvt;
+ bool margins;
+};
+
+struct drm_fb_helper_connector {
+ struct drm_fb_helper_cmdline_mode cmdline_mode;
};
struct drm_fb_helper {
};
int drm_fb_helper_single_fb_probe(struct drm_device *dev,
+ int preferred_bpp,
int (*fb_create)(struct drm_device *dev,
uint32_t fb_width,
uint32_t fb_height,
uint32_t surface_width,
uint32_t surface_height,
+ uint32_t surface_depth,
+ uint32_t surface_bpp,
struct drm_framebuffer **fb_ptr));
int drm_fb_helper_init_crtc_count(struct drm_fb_helper *helper, int crtc_count,
int max_conn);
void drm_fb_helper_restore(void);
void drm_fb_helper_fill_var(struct fb_info *info, struct drm_framebuffer *fb,
uint32_t fb_width, uint32_t fb_height);
-void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch);
+void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
+ uint32_t depth);
+
+int drm_fb_helper_add_connector(struct drm_connector *connector);
+int drm_fb_helper_parse_command_line(struct drm_device *dev);
+int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info);
#endif
{0x1002, 0x5158, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV200}, \
{0x1002, 0x5159, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
{0x1002, 0x515A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
- {0x1002, 0x515E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+ {0x1002, 0x515E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_SINGLE_CRTC}, \
{0x1002, 0x5460, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x5462, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x5464, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
{0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \
- {0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \
+ {0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100|RADEON_SINGLE_CRTC}, \
{0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_IGPGART}, \
{0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \
{0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_IGPGART}, \
{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e32, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x2e42, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
#define DRM_I915_GEM_GET_APERTURE 0x23
#define DRM_I915_GEM_MMAP_GTT 0x24
#define DRM_I915_GET_PIPE_FROM_CRTC_ID 0x25
+#define DRM_I915_GEM_MADVISE 0x26
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
#define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id)
+#define DRM_IOCTL_I915_GEM_MADVISE DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GEM_MADVISE, struct drm_i915_gem_madvise)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
__u32 pipe;
};
+#define I915_MADV_WILLNEED 0
+#define I915_MADV_DONTNEED 1
+#define __I915_MADV_PURGED 2 /* internal state */
+
+struct drm_i915_gem_madvise {
+ /** Handle of the buffer to change the backing store advice */
+ __u32 handle;
+
+ /* Advice: either the buffer will be needed again in the near future,
+ * or wont be and could be discarded under memory pressure.
+ */
+ __u32 madv;
+
+ /** Whether the backing store still exists. */
+ __u32 retained;
+};
+
#endif /* _I915_DRM_H_ */
header-y += nl80211.h
header-y += param.h
header-y += pci_regs.h
+header-y += perf_event.h
header-y += pfkeyv2.h
header-y += pg.h
header-y += phantom.h
unifdef-y += videodev2.h
unifdef-y += videodev.h
unifdef-y += virtio_config.h
+unifdef-y += virtio_ids.h
unifdef-y += virtio_blk.h
unifdef-y += virtio_net.h
unifdef-y += virtio_9p.h
int current_memory;
bool cant_use_aperture;
unsigned long page_mask;
- struct vm_operations_struct *vm_ops;
+ const struct vm_operations_struct *vm_ops;
};
/*
--- /dev/null
+/*
+ * include/linux/amba/mmci.h
+ */
+#ifndef AMBA_MMCI_H
+#define AMBA_MMCI_H
+
+#include <linux/mmc/host.h>
+
+struct mmci_platform_data {
+ unsigned int ocr_mask; /* available voltages */
+ u32 (*translate_vdd)(struct device *, unsigned int);
+ unsigned int (*status)(struct device *);
+ int gpio_wp;
+ int gpio_cd;
+ unsigned long capabilities;
+};
+
+#endif
/**
* enum SPI Clock Phase - clock phase (Motorola SPI interface only)
- * @SSP_CLK_RISING_EDGE: Receive data on rising edge
- * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity)
+ * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity)
*/
enum ssp_spi_clk_phase {
- SSP_CLK_RISING_EDGE,
- SSP_CLK_FALLING_EDGE
+ SSP_CLK_FIRST_EDGE,
+ SSP_CLK_SECOND_EDGE
};
/**
* array.
* @ASYNC_TX_ACK: immediately ack the descriptor, precludes setting up a
* dependency chain
- * @ASYNC_TX_DEP_ACK: ack the dependency descriptor. Useful for chaining.
+ * @ASYNC_TX_FENCE: specify that the next operation in the dependency
+ * chain uses this operation's result as an input
*/
enum async_tx_flags {
ASYNC_TX_XOR_ZERO_DST = (1 << 0),
ASYNC_TX_XOR_DROP_DST = (1 << 1),
- ASYNC_TX_ACK = (1 << 3),
- ASYNC_TX_DEP_ACK = (1 << 4),
+ ASYNC_TX_ACK = (1 << 2),
+ ASYNC_TX_FENCE = (1 << 3),
+};
+
+/**
+ * struct async_submit_ctl - async_tx submission/completion modifiers
+ * @flags: submission modifiers
+ * @depend_tx: parent dependency of the current operation being submitted
+ * @cb_fn: callback routine to run at operation completion
+ * @cb_param: parameter for the callback routine
+ * @scribble: caller provided space for dma/page address conversions
+ */
+struct async_submit_ctl {
+ enum async_tx_flags flags;
+ struct dma_async_tx_descriptor *depend_tx;
+ dma_async_tx_callback cb_fn;
+ void *cb_param;
+ void *scribble;
};
#ifdef CONFIG_DMA_ENGINE
#define async_tx_issue_pending_all dma_issue_pending_all
+
+/**
+ * async_tx_issue_pending - send pending descriptor to the hardware channel
+ * @tx: descriptor handle to retrieve hardware context
+ *
+ * Note: any dependent operations will have already been issued by
+ * async_tx_channel_switch, or (in the case of no channel switch) will
+ * be already pending on this channel.
+ */
+static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
+{
+ if (likely(tx)) {
+ struct dma_chan *chan = tx->chan;
+ struct dma_device *dma = chan->device;
+
+ dma->device_issue_pending(chan);
+ }
+}
#ifdef CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL
#include <asm/async_tx.h>
#else
#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \
__async_tx_find_channel(dep, type)
struct dma_chan *
-__async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx,
- enum dma_transaction_type tx_type);
+__async_tx_find_channel(struct async_submit_ctl *submit,
+ enum dma_transaction_type tx_type);
#endif /* CONFIG_ARCH_HAS_ASYNC_TX_FIND_CHANNEL */
#else
static inline void async_tx_issue_pending_all(void)
do { } while (0);
}
+static inline void async_tx_issue_pending(struct dma_async_tx_descriptor *tx)
+{
+ do { } while (0);
+}
+
static inline struct dma_chan *
-async_tx_find_channel(struct dma_async_tx_descriptor *depend_tx,
- enum dma_transaction_type tx_type, struct page **dst, int dst_count,
- struct page **src, int src_count, size_t len)
+async_tx_find_channel(struct async_submit_ctl *submit,
+ enum dma_transaction_type tx_type, struct page **dst,
+ int dst_count, struct page **src, int src_count,
+ size_t len)
{
return NULL;
}
* @cb_fn_param: parameter to pass to the callback routine
*/
static inline void
-async_tx_sync_epilog(dma_async_tx_callback cb_fn, void *cb_fn_param)
+async_tx_sync_epilog(struct async_submit_ctl *submit)
{
- if (cb_fn)
- cb_fn(cb_fn_param);
+ if (submit->cb_fn)
+ submit->cb_fn(submit->cb_param);
}
-void
-async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
- enum async_tx_flags flags, struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+typedef union {
+ unsigned long addr;
+ struct page *page;
+ dma_addr_t dma;
+} addr_conv_t;
+
+static inline void
+init_async_submit(struct async_submit_ctl *args, enum async_tx_flags flags,
+ struct dma_async_tx_descriptor *tx,
+ dma_async_tx_callback cb_fn, void *cb_param,
+ addr_conv_t *scribble)
+{
+ args->flags = flags;
+ args->depend_tx = tx;
+ args->cb_fn = cb_fn;
+ args->cb_param = cb_param;
+ args->scribble = scribble;
+}
+
+void async_tx_submit(struct dma_chan *chan, struct dma_async_tx_descriptor *tx,
+ struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_xor(struct page *dest, struct page **src_list, unsigned int offset,
- int src_cnt, size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+ int src_cnt, size_t len, struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
-async_xor_zero_sum(struct page *dest, struct page **src_list,
- unsigned int offset, int src_cnt, size_t len,
- u32 *result, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+async_xor_val(struct page *dest, struct page **src_list, unsigned int offset,
+ int src_cnt, size_t len, enum sum_check_flags *result,
+ struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_memcpy(struct page *dest, struct page *src, unsigned int dest_offset,
- unsigned int src_offset, size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+ unsigned int src_offset, size_t len,
+ struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
async_memset(struct page *dest, int val, unsigned int offset,
- size_t len, enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+ size_t len, struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *async_trigger_callback(struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_gen_syndrome(struct page **blocks, unsigned int offset, int src_cnt,
+ size_t len, struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_syndrome_val(struct page **blocks, unsigned int offset, int src_cnt,
+ size_t len, enum sum_check_flags *pqres, struct page *spare,
+ struct async_submit_ctl *submit);
+
+struct dma_async_tx_descriptor *
+async_raid6_2data_recov(int src_num, size_t bytes, int faila, int failb,
+ struct page **ptrs, struct async_submit_ctl *submit);
struct dma_async_tx_descriptor *
-async_trigger_callback(enum async_tx_flags flags,
- struct dma_async_tx_descriptor *depend_tx,
- dma_async_tx_callback cb_fn, void *cb_fn_param);
+async_raid6_datap_recov(int src_num, size_t bytes, int faila,
+ struct page **ptrs, struct async_submit_ctl *submit);
void async_tx_quiesce(struct dma_async_tx_descriptor **tx);
#endif /* _ASYNC_TX_H_ */
SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
/* SETFEATURE Sector counts for SATA features */
- SATA_AN = 0x05, /* Asynchronous Notification */
- SATA_DIPM = 0x03, /* Device Initiated Power Management */
- SATA_FPDMA_AA = 0x02, /* DMA Setup FIS Auto-Activate */
+ SATA_FPDMA_OFFSET = 0x01, /* FPDMA non-zero buffer offsets */
+ SATA_FPDMA_AA = 0x02, /* FPDMA Setup FIS Auto-Activate */
+ SATA_DIPM = 0x03, /* Device Initiated Power Management */
+ SATA_FPDMA_IN_ORDER = 0x04, /* FPDMA in-order data delivery */
+ SATA_AN = 0x05, /* Asynchronous Notification */
+ SATA_SSP = 0x06, /* Software Settings Preservation */
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
int (*getsockopt)(struct atm_vcc *vcc,int level,int optname,
void __user *optval,int optlen);
int (*setsockopt)(struct atm_vcc *vcc,int level,int optname,
- void __user *optval,int optlen);
+ void __user *optval,unsigned int optlen);
int (*send)(struct atm_vcc *vcc,struct sk_buff *skb);
int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags);
void (*phy_put)(struct atm_dev *dev,unsigned char value,
const char *fmt, ...);
int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
void bdi_unregister(struct backing_dev_info *bdi);
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+ long nr_pages);
int bdi_writeback_task(struct bdi_writeback *wb);
int bdi_has_dirty_io(struct backing_dev_info *bdi);
* Any other use of the locks below is probably wrong.
*/
+enum backlight_update_reason {
+ BACKLIGHT_UPDATE_HOTKEY,
+ BACKLIGHT_UPDATE_SYSFS,
+};
+
struct backlight_device;
struct fb_info;
extern struct backlight_device *backlight_device_register(const char *name,
struct device *dev, void *devdata, struct backlight_ops *ops);
extern void backlight_device_unregister(struct backlight_device *bd);
+extern void backlight_force_update(struct backlight_device *bd,
+ enum backlight_update_reason reason);
#define to_backlight_device(obj) container_of(obj, struct backlight_device, dev)
extern int prepare_bprm_creds(struct linux_binprm *bprm);
extern void install_exec_creds(struct linux_binprm *bprm);
extern void do_coredump(long signr, int exit_code, struct pt_regs *regs);
-extern int set_binfmt(struct linux_binfmt *new);
+extern void set_binfmt(struct linux_binfmt *new);
extern void free_bprm(struct linux_binprm *);
#endif /* __KERNEL__ */
enum {
REQ_LB_OP_EJECT = 0x40, /* eject request */
REQ_LB_OP_FLUSH = 0x41, /* flush request */
- REQ_LB_OP_DISCARD = 0x42, /* discard sectors */
};
/*
typedef int (make_request_fn) (struct request_queue *q, struct bio *bio);
typedef int (prep_rq_fn) (struct request_queue *, struct request *);
typedef void (unplug_fn) (struct request_queue *);
-typedef int (prepare_discard_fn) (struct request_queue *, struct request *);
struct bio_vec;
struct bvec_merge_data {
unsigned int alignment_offset;
unsigned int io_min;
unsigned int io_opt;
+ unsigned int max_discard_sectors;
unsigned short logical_block_size;
unsigned short max_hw_segments;
make_request_fn *make_request_fn;
prep_rq_fn *prep_rq_fn;
unplug_fn *unplug_fn;
- prepare_discard_fn *prepare_discard_fn;
merge_bvec_fn *merge_bvec_fn;
prepare_flush_fn *prepare_flush_fn;
softirq_done_fn *softirq_done_fn;
#define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */
#define QUEUE_FLAG_IO_STAT 15 /* do IO stats */
#define QUEUE_FLAG_CQ 16 /* hardware does queuing */
+#define QUEUE_FLAG_DISCARD 17 /* supports DISCARD */
#define QUEUE_FLAG_DEFAULT ((1 << QUEUE_FLAG_IO_STAT) | \
(1 << QUEUE_FLAG_CLUSTER) | \
#define blk_queue_flushing(q) ((q)->ordseq)
#define blk_queue_stackable(q) \
test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
+#define blk_queue_discard(q) test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
#define blk_fs_request(rq) ((rq)->cmd_type == REQ_TYPE_FS)
#define blk_pc_request(rq) ((rq)->cmd_type == REQ_TYPE_BLOCK_PC)
extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short);
extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short);
extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
+extern void blk_queue_max_discard_sectors(struct request_queue *q,
+ unsigned int max_discard_sectors);
extern void blk_queue_logical_block_size(struct request_queue *, unsigned short);
extern void blk_queue_physical_block_size(struct request_queue *, unsigned short);
extern void blk_queue_alignment_offset(struct request_queue *q,
extern void blk_queue_dma_alignment(struct request_queue *, int);
extern void blk_queue_update_dma_alignment(struct request_queue *, int);
extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
-extern void blk_queue_set_discard(struct request_queue *, prepare_discard_fn *);
extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
return q->limits.physical_block_size;
}
+static inline int bdev_physical_block_size(struct block_device *bdev)
+{
+ return queue_physical_block_size(bdev_get_queue(bdev));
+}
+
static inline unsigned int queue_io_min(struct request_queue *q)
{
return q->limits.io_min;
}
+static inline int bdev_io_min(struct block_device *bdev)
+{
+ return queue_io_min(bdev_get_queue(bdev));
+}
+
static inline unsigned int queue_io_opt(struct request_queue *q)
{
return q->limits.io_opt;
}
+static inline int bdev_io_opt(struct block_device *bdev)
+{
+ return queue_io_opt(bdev_get_queue(bdev));
+}
+
static inline int queue_alignment_offset(struct request_queue *q)
{
- if (q && q->limits.misaligned)
+ if (q->limits.misaligned)
return -1;
- if (q && q->limits.alignment_offset)
- return q->limits.alignment_offset;
-
- return 0;
+ return q->limits.alignment_offset;
}
static inline int queue_sector_alignment_offset(struct request_queue *q,
& (q->limits.io_min - 1);
}
+static inline int bdev_alignment_offset(struct block_device *bdev)
+{
+ struct request_queue *q = bdev_get_queue(bdev);
+
+ if (q->limits.misaligned)
+ return -1;
+
+ if (bdev != bdev->bd_contains)
+ return bdev->bd_part->alignment_offset;
+
+ return q->limits.alignment_offset;
+}
+
static inline int queue_dma_alignment(struct request_queue *q)
{
return q ? q->dma_alignment : 511;
char __user *arg);
extern int blk_trace_startstop(struct request_queue *q, int start);
extern int blk_trace_remove(struct request_queue *q);
+extern void blk_trace_remove_sysfs(struct device *dev);
extern int blk_trace_init_sysfs(struct device *dev);
extern struct attribute_group blk_trace_attr_group;
# define blk_trace_startstop(q, start) (-ENOTTY)
# define blk_trace_remove(q) (-ENOTTY)
# define blk_add_trace_msg(q, fmt, ...) do { } while (0)
+# define blk_trace_remove_sysfs(dev) do { } while (0)
static inline int blk_trace_init_sysfs(struct device *dev)
{
return 0;
extern int cgroupstats_build(struct cgroupstats *stats,
struct dentry *dentry);
-extern struct file_operations proc_cgroup_operations;
+extern const struct file_operations proc_cgroup_operations;
/* Define the enumeration of all cgroup subsystems */
#define SUBSYS(_x) _x ## _subsys_id,
CGRP_WAIT_ON_RMDIR,
};
+/* which pidlist file are we talking about? */
+enum cgroup_filetype {
+ CGROUP_FILE_PROCS,
+ CGROUP_FILE_TASKS,
+};
+
+/*
+ * A pidlist is a list of pids that virtually represents the contents of one
+ * of the cgroup files ("procs" or "tasks"). We keep a list of such pidlists,
+ * a pair (one each for procs, tasks) for each pid namespace that's relevant
+ * to the cgroup.
+ */
+struct cgroup_pidlist {
+ /*
+ * used to find which pidlist is wanted. doesn't change as long as
+ * this particular list stays in the list.
+ */
+ struct { enum cgroup_filetype type; struct pid_namespace *ns; } key;
+ /* array of xids */
+ pid_t *list;
+ /* how many elements the above list has */
+ int length;
+ /* how many files are using the current array */
+ int use_count;
+ /* each of these stored in a list by its cgroup */
+ struct list_head links;
+ /* pointer to the cgroup we belong to, for list removal purposes */
+ struct cgroup *owner;
+ /* protects the other fields */
+ struct rw_semaphore mutex;
+};
+
struct cgroup {
unsigned long flags; /* "unsigned long" so bitops work */
*/
struct list_head release_list;
- /* pids_mutex protects pids_list and cached pid arrays. */
- struct rw_semaphore pids_mutex;
-
- /* Linked list of struct cgroup_pids */
- struct list_head pids_list;
+ /*
+ * list of pidlists, up to two for each namespace (one for procs, one
+ * for tasks); created on demand.
+ */
+ struct list_head pidlists;
+ struct mutex pidlist_mutex;
/* For RCU-protected deletion */
struct rcu_head rcu_head;
* during subsystem registration (at boot time).
*/
struct cgroup_subsys_state *subsys[CGROUP_SUBSYS_COUNT];
+
+ /* For RCU-protected deletion */
+ struct rcu_head rcu_head;
};
/*
struct cgroup *cgrp);
int (*pre_destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp);
void (*destroy)(struct cgroup_subsys *ss, struct cgroup *cgrp);
- int (*can_attach)(struct cgroup_subsys *ss,
- struct cgroup *cgrp, struct task_struct *tsk);
+ int (*can_attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
+ struct task_struct *tsk, bool threadgroup);
void (*attach)(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct cgroup *old_cgrp, struct task_struct *tsk);
+ struct cgroup *old_cgrp, struct task_struct *tsk,
+ bool threadgroup);
void (*fork)(struct cgroup_subsys *ss, struct task_struct *task);
void (*exit)(struct cgroup_subsys *ss, struct task_struct *task);
int (*populate)(struct cgroup_subsys *ss,
*
* configfs Copyright (C) 2005 Oracle. All rights reserved.
*
- * Please read Documentation/filesystems/configfs.txt before using the
- * configfs interface, ESPECIALLY the parts about reference counts and
+ * Please read Documentation/filesystems/configfs/configfs.txt before using
+ * the configfs interface, ESPECIALLY the parts about reference counts and
* item destructors.
*/
};
struct cn_callback_data {
- void (*destruct_data) (void *);
- void *ddata;
-
- void *callback_priv;
- void (*callback) (struct cn_msg *);
+ struct sk_buff *skb;
+ void (*callback) (struct cn_msg *, struct netlink_skb_parms *);
void *free;
};
struct cn_queue_dev *cbdev;
};
-int cn_add_callback(struct cb_id *, char *, void (*callback) (struct cn_msg *));
+int cn_add_callback(struct cb_id *, char *, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
void cn_del_callback(struct cb_id *);
int cn_netlink_send(struct cn_msg *, u32, gfp_t);
-int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(struct cn_msg *));
+int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(struct cn_msg *, struct netlink_skb_parms *));
void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id);
int queue_cn_work(struct cn_callback_entry *cbq, struct work_struct *work);
int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
int cpufreq_update_policy(unsigned int cpu);
+#ifdef CONFIG_CPU_FREQ
/* query the current CPU frequency (in kHz). If zero, cpufreq couldn't detect it */
unsigned int cpufreq_get(unsigned int cpu);
+#else
+static inline unsigned int cpufreq_get(unsigned int cpu)
+{
+ return 0;
+}
+#endif
/* query the last known CPU freq (in kHz). If zero, cpufreq couldn't detect it */
#ifdef CONFIG_CPU_FREQ
/*
* Cpumasks provide a bitmap suitable for representing the
- * set of CPU's in a system, one bit position per CPU number.
- *
- * The new cpumask_ ops take a "struct cpumask *"; the old ones
- * use cpumask_t.
- *
- * See detailed comments in the file linux/bitmap.h describing the
- * data type on which these cpumasks are based.
- *
- * For details of cpumask_scnprintf() and cpumask_parse_user(),
- * see bitmap_scnprintf() and bitmap_parse_user() in lib/bitmap.c.
- * For details of cpulist_scnprintf() and cpulist_parse(), see
- * bitmap_scnlistprintf() and bitmap_parselist(), also in bitmap.c.
- * For details of cpu_remap(), see bitmap_bitremap in lib/bitmap.c
- * For details of cpus_remap(), see bitmap_remap in lib/bitmap.c.
- * For details of cpus_onto(), see bitmap_onto in lib/bitmap.c.
- * For details of cpus_fold(), see bitmap_fold in lib/bitmap.c.
- *
- * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- * Note: The alternate operations with the suffix "_nr" are used
- * to limit the range of the loop to nr_cpu_ids instead of
- * NR_CPUS when NR_CPUS > 64 for performance reasons.
- * If NR_CPUS is <= 64 then most assembler bitmask
- * operators execute faster with a constant range, so
- * the operator will continue to use NR_CPUS.
- *
- * Another consideration is that nr_cpu_ids is initialized
- * to NR_CPUS and isn't lowered until the possible cpus are
- * discovered (including any disabled cpus). So early uses
- * will span the entire range of NR_CPUS.
- * . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
- *
- * The obsolescent cpumask operations are:
- *
- * void cpu_set(cpu, mask) turn on bit 'cpu' in mask
- * void cpu_clear(cpu, mask) turn off bit 'cpu' in mask
- * void cpus_setall(mask) set all bits
- * void cpus_clear(mask) clear all bits
- * int cpu_isset(cpu, mask) true iff bit 'cpu' set in mask
- * int cpu_test_and_set(cpu, mask) test and set bit 'cpu' in mask
- *
- * int cpus_and(dst, src1, src2) dst = src1 & src2 [intersection]
- * void cpus_or(dst, src1, src2) dst = src1 | src2 [union]
- * void cpus_xor(dst, src1, src2) dst = src1 ^ src2
- * int cpus_andnot(dst, src1, src2) dst = src1 & ~src2
- * void cpus_complement(dst, src) dst = ~src
- *
- * int cpus_equal(mask1, mask2) Does mask1 == mask2?
- * int cpus_intersects(mask1, mask2) Do mask1 and mask2 intersect?
- * int cpus_subset(mask1, mask2) Is mask1 a subset of mask2?
- * int cpus_empty(mask) Is mask empty (no bits sets)?
- * int cpus_full(mask) Is mask full (all bits sets)?
- * int cpus_weight(mask) Hamming weigh - number of set bits
- * int cpus_weight_nr(mask) Same using nr_cpu_ids instead of NR_CPUS
- *
- * void cpus_shift_right(dst, src, n) Shift right
- * void cpus_shift_left(dst, src, n) Shift left
- *
- * int first_cpu(mask) Number lowest set bit, or NR_CPUS
- * int next_cpu(cpu, mask) Next cpu past 'cpu', or NR_CPUS
- * int next_cpu_nr(cpu, mask) Next cpu past 'cpu', or nr_cpu_ids
- *
- * cpumask_t cpumask_of_cpu(cpu) Return cpumask with bit 'cpu' set
- * (can be used as an lvalue)
- * CPU_MASK_ALL Initializer - all bits set
- * CPU_MASK_NONE Initializer - no bits set
- * unsigned long *cpus_addr(mask) Array of unsigned long's in mask
- *
- * CPUMASK_ALLOC kmalloc's a structure that is a composite of many cpumask_t
- * variables, and CPUMASK_PTR provides pointers to each field.
- *
- * The structure should be defined something like this:
- * struct my_cpumasks {
- * cpumask_t mask1;
- * cpumask_t mask2;
- * };
- *
- * Usage is then:
- * CPUMASK_ALLOC(my_cpumasks);
- * CPUMASK_PTR(mask1, my_cpumasks);
- * CPUMASK_PTR(mask2, my_cpumasks);
- *
- * --- DO NOT reference cpumask_t pointers until this check ---
- * if (my_cpumasks == NULL)
- * "kmalloc failed"...
- *
- * References are now pointers to the cpumask_t variables (*mask1, ...)
- *
- *if NR_CPUS > BITS_PER_LONG
- * CPUMASK_ALLOC(m) Declares and allocates struct m *m =
- * kmalloc(sizeof(*m), GFP_KERNEL)
- * CPUMASK_FREE(m) Macro for kfree(m)
- *else
- * CPUMASK_ALLOC(m) Declares struct m _m, *m = &_m
- * CPUMASK_FREE(m) Nop
- *endif
- * CPUMASK_PTR(v, m) Declares cpumask_t *v = &(m->v)
- * ------------------------------------------------------------------------
- *
- * int cpumask_scnprintf(buf, len, mask) Format cpumask for printing
- * int cpumask_parse_user(ubuf, ulen, mask) Parse ascii string as cpumask
- * int cpulist_scnprintf(buf, len, mask) Format cpumask as list for printing
- * int cpulist_parse(buf, map) Parse ascii string as cpulist
- * int cpu_remap(oldbit, old, new) newbit = map(old, new)(oldbit)
- * void cpus_remap(dst, src, old, new) *dst = map(old, new)(src)
- * void cpus_onto(dst, orig, relmap) *dst = orig relative to relmap
- * void cpus_fold(dst, orig, sz) dst bits = orig bits mod sz
- *
- * for_each_cpu_mask(cpu, mask) for-loop cpu over mask using NR_CPUS
- * for_each_cpu_mask_nr(cpu, mask) for-loop cpu over mask using nr_cpu_ids
- *
- * int num_online_cpus() Number of online CPUs
- * int num_possible_cpus() Number of all possible CPUs
- * int num_present_cpus() Number of present CPUs
- *
- * int cpu_online(cpu) Is some cpu online?
- * int cpu_possible(cpu) Is some cpu possible?
- * int cpu_present(cpu) Is some cpu present (can schedule)?
- *
- * int any_online_cpu(mask) First online cpu in mask
- *
- * for_each_possible_cpu(cpu) for-loop cpu over cpu_possible_map
- * for_each_online_cpu(cpu) for-loop cpu over cpu_online_map
- * for_each_present_cpu(cpu) for-loop cpu over cpu_present_map
- *
- * Subtlety:
- * 1) The 'type-checked' form of cpu_isset() causes gcc (3.3.2, anyway)
- * to generate slightly worse code. Note for example the additional
- * 40 lines of assembly code compiling the "for each possible cpu"
- * loops buried in the disk_stat_read() macros calls when compiling
- * drivers/block/genhd.c (arch i386, CONFIG_SMP=y). So use a simple
- * one-line #define for cpu_isset(), instead of wrapping an inline
- * inside a macro, the way we do the other calls.
+ * set of CPU's in a system, one bit position per CPU number. In general,
+ * only nr_cpu_ids (<= NR_CPUS) bits are valid.
*/
-
#include <linux/kernel.h>
#include <linux/threads.h>
#include <linux/bitmap.h>
typedef struct cpumask { DECLARE_BITMAP(bits, NR_CPUS); } cpumask_t;
-extern cpumask_t _unused_cpumask_arg_;
-
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst))
-static inline void __cpu_set(int cpu, volatile cpumask_t *dstp)
-{
- set_bit(cpu, dstp->bits);
-}
-
-#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst))
-static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp)
-{
- clear_bit(cpu, dstp->bits);
-}
-
-#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS)
-static inline void __cpus_setall(cpumask_t *dstp, int nbits)
-{
- bitmap_fill(dstp->bits, nbits);
-}
-
-#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS)
-static inline void __cpus_clear(cpumask_t *dstp, int nbits)
-{
- bitmap_zero(dstp->bits, nbits);
-}
-
-/* No static inline type checking - see Subtlety (1) above. */
-#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits)
-
-#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask))
-static inline int __cpu_test_and_set(int cpu, cpumask_t *addr)
-{
- return test_and_set_bit(cpu, addr->bits);
-}
-
-#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
-static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS)
-static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_andnot(dst, src1, src2) \
- __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
-static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_complement(dst, src) __cpus_complement(&(dst), &(src), NR_CPUS)
-static inline void __cpus_complement(cpumask_t *dstp,
- const cpumask_t *srcp, int nbits)
-{
- bitmap_complement(dstp->bits, srcp->bits, nbits);
-}
-
-#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_equal(const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_equal(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_intersects(const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_intersects(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS)
-static inline int __cpus_subset(const cpumask_t *src1p,
- const cpumask_t *src2p, int nbits)
-{
- return bitmap_subset(src1p->bits, src2p->bits, nbits);
-}
-
-#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS)
-static inline int __cpus_empty(const cpumask_t *srcp, int nbits)
-{
- return bitmap_empty(srcp->bits, nbits);
-}
-
-#define cpus_full(cpumask) __cpus_full(&(cpumask), NR_CPUS)
-static inline int __cpus_full(const cpumask_t *srcp, int nbits)
-{
- return bitmap_full(srcp->bits, nbits);
-}
-
-#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS)
-static inline int __cpus_weight(const cpumask_t *srcp, int nbits)
-{
- return bitmap_weight(srcp->bits, nbits);
-}
-
-#define cpus_shift_right(dst, src, n) \
- __cpus_shift_right(&(dst), &(src), (n), NR_CPUS)
-static inline void __cpus_shift_right(cpumask_t *dstp,
- const cpumask_t *srcp, int n, int nbits)
-{
- bitmap_shift_right(dstp->bits, srcp->bits, n, nbits);
-}
-
-#define cpus_shift_left(dst, src, n) \
- __cpus_shift_left(&(dst), &(src), (n), NR_CPUS)
-static inline void __cpus_shift_left(cpumask_t *dstp,
- const cpumask_t *srcp, int n, int nbits)
-{
- bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
-}
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
/**
- * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask *
- * @bitmap: the bitmap
- *
- * There are a few places where cpumask_var_t isn't appropriate and
- * static cpumasks must be used (eg. very early boot), yet we don't
- * expose the definition of 'struct cpumask'.
- *
- * This does the conversion, and can be used as a constant initializer.
- */
-#define to_cpumask(bitmap) \
- ((struct cpumask *)(1 ? (bitmap) \
- : (void *)sizeof(__check_is_bitmap(bitmap))))
-
-static inline int __check_is_bitmap(const unsigned long *bitmap)
-{
- return 1;
-}
-
-/*
- * Special-case data structure for "single bit set only" constant CPU masks.
+ * cpumask_bits - get the bits in a cpumask
+ * @maskp: the struct cpumask *
*
- * We pre-generate all the 64 (or 32) possible bit positions, with enough
- * padding to the left and the right, and return the constant pointer
- * appropriately offset.
- */
-extern const unsigned long
- cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
-
-static inline const struct cpumask *get_cpu_mask(unsigned int cpu)
-{
- const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
- p -= cpu / BITS_PER_LONG;
- return to_cpumask(p);
-}
-
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-/*
- * In cases where we take the address of the cpumask immediately,
- * gcc optimizes it out (it's a constant) and there's no huge stack
- * variable created:
+ * You should only assume nr_cpu_ids bits of this mask are valid. This is
+ * a macro so it's const-correct.
*/
-#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
-
-
-#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
-
-#if NR_CPUS <= BITS_PER_LONG
-
-#define CPU_MASK_ALL \
-(cpumask_t) { { \
- [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
-} }
-
-#define CPU_MASK_ALL_PTR (&CPU_MASK_ALL)
-
-#else
-
-#define CPU_MASK_ALL \
-(cpumask_t) { { \
- [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \
- [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
-} }
-
-/* cpu_mask_all is in init/main.c */
-extern cpumask_t cpu_mask_all;
-#define CPU_MASK_ALL_PTR (&cpu_mask_all)
-
-#endif
-
-#define CPU_MASK_NONE \
-(cpumask_t) { { \
- [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \
-} }
-
-#define CPU_MASK_CPU0 \
-(cpumask_t) { { \
- [0] = 1UL \
-} }
-
-#define cpus_addr(src) ((src).bits)
-
-#if NR_CPUS > BITS_PER_LONG
-#define CPUMASK_ALLOC(m) struct m *m = kmalloc(sizeof(*m), GFP_KERNEL)
-#define CPUMASK_FREE(m) kfree(m)
-#else
-#define CPUMASK_ALLOC(m) struct m _m, *m = &_m
-#define CPUMASK_FREE(m)
-#endif
-#define CPUMASK_PTR(v, m) cpumask_t *v = &(m->v)
-
-#define cpu_remap(oldbit, old, new) \
- __cpu_remap((oldbit), &(old), &(new), NR_CPUS)
-static inline int __cpu_remap(int oldbit,
- const cpumask_t *oldp, const cpumask_t *newp, int nbits)
-{
- return bitmap_bitremap(oldbit, oldp->bits, newp->bits, nbits);
-}
-
-#define cpus_remap(dst, src, old, new) \
- __cpus_remap(&(dst), &(src), &(old), &(new), NR_CPUS)
-static inline void __cpus_remap(cpumask_t *dstp, const cpumask_t *srcp,
- const cpumask_t *oldp, const cpumask_t *newp, int nbits)
-{
- bitmap_remap(dstp->bits, srcp->bits, oldp->bits, newp->bits, nbits);
-}
-
-#define cpus_onto(dst, orig, relmap) \
- __cpus_onto(&(dst), &(orig), &(relmap), NR_CPUS)
-static inline void __cpus_onto(cpumask_t *dstp, const cpumask_t *origp,
- const cpumask_t *relmapp, int nbits)
-{
- bitmap_onto(dstp->bits, origp->bits, relmapp->bits, nbits);
-}
-
-#define cpus_fold(dst, orig, sz) \
- __cpus_fold(&(dst), &(orig), sz, NR_CPUS)
-static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp,
- int sz, int nbits)
-{
- bitmap_fold(dstp->bits, origp->bits, sz, nbits);
-}
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
+#define cpumask_bits(maskp) ((maskp)->bits)
#if NR_CPUS == 1
-
#define nr_cpu_ids 1
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-#define first_cpu(src) ({ (void)(src); 0; })
-#define next_cpu(n, src) ({ (void)(src); 1; })
-#define any_online_cpu(mask) 0
-#define for_each_cpu_mask(cpu, mask) \
- for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
-#else /* NR_CPUS > 1 */
-
+#else
extern int nr_cpu_ids;
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-int __first_cpu(const cpumask_t *srcp);
-int __next_cpu(int n, const cpumask_t *srcp);
-int __any_online_cpu(const cpumask_t *mask);
-
-#define first_cpu(src) __first_cpu(&(src))
-#define next_cpu(n, src) __next_cpu((n), &(src))
-#define any_online_cpu(mask) __any_online_cpu(&(mask))
-#define for_each_cpu_mask(cpu, mask) \
- for ((cpu) = -1; \
- (cpu) = next_cpu((cpu), (mask)), \
- (cpu) < NR_CPUS; )
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
#endif
-#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
-#if NR_CPUS <= 64
-
-#define next_cpu_nr(n, src) next_cpu(n, src)
-#define cpus_weight_nr(cpumask) cpus_weight(cpumask)
-#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask)
-
-#else /* NR_CPUS > 64 */
-
-int __next_cpu_nr(int n, const cpumask_t *srcp);
-#define next_cpu_nr(n, src) __next_cpu_nr((n), &(src))
-#define cpus_weight_nr(cpumask) __cpus_weight(&(cpumask), nr_cpu_ids)
-#define for_each_cpu_mask_nr(cpu, mask) \
- for ((cpu) = -1; \
- (cpu) = next_cpu_nr((cpu), (mask)), \
- (cpu) < nr_cpu_ids; )
-
-#endif /* NR_CPUS > 64 */
-#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
+#ifdef CONFIG_CPUMASK_OFFSTACK
+/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also,
+ * not all bits may be allocated. */
+#define nr_cpumask_bits nr_cpu_ids
+#else
+#define nr_cpumask_bits NR_CPUS
+#endif
/*
* The following particular system cpumasks and operations manage
extern const struct cpumask *const cpu_possible_mask;
extern const struct cpumask *const cpu_online_mask;
extern const struct cpumask *const cpu_present_mask;
-extern const struct cpumask *const cpu_active_mask;
-
-/* These strip const, as traditionally they weren't const. */
-#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask)
-#define cpu_online_map (*(cpumask_t *)cpu_online_mask)
-#define cpu_present_map (*(cpumask_t *)cpu_present_mask)
-#define cpu_active_map (*(cpumask_t *)cpu_active_mask)
-
-#if NR_CPUS > 1
-#define num_online_cpus() cpumask_weight(cpu_online_mask)
-#define num_possible_cpus() cpumask_weight(cpu_possible_mask)
-#define num_present_cpus() cpumask_weight(cpu_present_mask)
-#define cpu_online(cpu) cpumask_test_cpu((cpu), cpu_online_mask)
-#define cpu_possible(cpu) cpumask_test_cpu((cpu), cpu_possible_mask)
-#define cpu_present(cpu) cpumask_test_cpu((cpu), cpu_present_mask)
-#define cpu_active(cpu) cpumask_test_cpu((cpu), cpu_active_mask)
-#else
-#define num_online_cpus() 1
-#define num_possible_cpus() 1
-#define num_present_cpus() 1
-#define cpu_online(cpu) ((cpu) == 0)
-#define cpu_possible(cpu) ((cpu) == 0)
-#define cpu_present(cpu) ((cpu) == 0)
-#define cpu_active(cpu) ((cpu) == 0)
-#endif
-
-#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu))
-
-/* These are the new versions of the cpumask operators: passed by pointer.
- * The older versions will be implemented in terms of these, then deleted. */
-#define cpumask_bits(maskp) ((maskp)->bits)
-
-#if NR_CPUS <= BITS_PER_LONG
-#define CPU_BITS_ALL \
-{ \
- [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
-}
-
-#else /* NR_CPUS > BITS_PER_LONG */
-
-#define CPU_BITS_ALL \
-{ \
- [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \
- [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
-}
-#endif /* NR_CPUS > BITS_PER_LONG */
+extern const struct cpumask *const cpu_active_mask;
-#ifdef CONFIG_CPUMASK_OFFSTACK
-/* Assuming NR_CPUS is huge, a runtime limit is more efficient. Also,
- * not all bits may be allocated. */
-#define nr_cpumask_bits nr_cpu_ids
+#if NR_CPUS > 1
+#define num_online_cpus() cpumask_weight(cpu_online_mask)
+#define num_possible_cpus() cpumask_weight(cpu_possible_mask)
+#define num_present_cpus() cpumask_weight(cpu_present_mask)
+#define cpu_online(cpu) cpumask_test_cpu((cpu), cpu_online_mask)
+#define cpu_possible(cpu) cpumask_test_cpu((cpu), cpu_possible_mask)
+#define cpu_present(cpu) cpumask_test_cpu((cpu), cpu_present_mask)
+#define cpu_active(cpu) cpumask_test_cpu((cpu), cpu_active_mask)
#else
-#define nr_cpumask_bits NR_CPUS
+#define num_online_cpus() 1
+#define num_possible_cpus() 1
+#define num_present_cpus() 1
+#define cpu_online(cpu) ((cpu) == 0)
+#define cpu_possible(cpu) ((cpu) == 0)
+#define cpu_present(cpu) ((cpu) == 0)
+#define cpu_active(cpu) ((cpu) == 0)
#endif
/* verify cpu argument to cpumask_* operators */
void init_cpu_present(const struct cpumask *src);
void init_cpu_possible(const struct cpumask *src);
void init_cpu_online(const struct cpumask *src);
+
+/**
+ * to_cpumask - convert an NR_CPUS bitmap to a struct cpumask *
+ * @bitmap: the bitmap
+ *
+ * There are a few places where cpumask_var_t isn't appropriate and
+ * static cpumasks must be used (eg. very early boot), yet we don't
+ * expose the definition of 'struct cpumask'.
+ *
+ * This does the conversion, and can be used as a constant initializer.
+ */
+#define to_cpumask(bitmap) \
+ ((struct cpumask *)(1 ? (bitmap) \
+ : (void *)sizeof(__check_is_bitmap(bitmap))))
+
+static inline int __check_is_bitmap(const unsigned long *bitmap)
+{
+ return 1;
+}
+
+/*
+ * Special-case data structure for "single bit set only" constant CPU masks.
+ *
+ * We pre-generate all the 64 (or 32) possible bit positions, with enough
+ * padding to the left and the right, and return the constant pointer
+ * appropriately offset.
+ */
+extern const unsigned long
+ cpu_bit_bitmap[BITS_PER_LONG+1][BITS_TO_LONGS(NR_CPUS)];
+
+static inline const struct cpumask *get_cpu_mask(unsigned int cpu)
+{
+ const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
+ p -= cpu / BITS_PER_LONG;
+ return to_cpumask(p);
+}
+
+#define cpu_is_offline(cpu) unlikely(!cpu_online(cpu))
+
+#if NR_CPUS <= BITS_PER_LONG
+#define CPU_BITS_ALL \
+{ \
+ [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
+}
+
+#else /* NR_CPUS > BITS_PER_LONG */
+
+#define CPU_BITS_ALL \
+{ \
+ [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \
+ [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
+}
+#endif /* NR_CPUS > BITS_PER_LONG */
+
+/*
+ *
+ * From here down, all obsolete. Use cpumask_ variants!
+ *
+ */
+#ifndef CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS
+/* These strip const, as traditionally they weren't const. */
+#define cpu_possible_map (*(cpumask_t *)cpu_possible_mask)
+#define cpu_online_map (*(cpumask_t *)cpu_online_mask)
+#define cpu_present_map (*(cpumask_t *)cpu_present_mask)
+#define cpu_active_map (*(cpumask_t *)cpu_active_mask)
+
+#define cpumask_of_cpu(cpu) (*get_cpu_mask(cpu))
+
+#define CPU_MASK_LAST_WORD BITMAP_LAST_WORD_MASK(NR_CPUS)
+
+#if NR_CPUS <= BITS_PER_LONG
+
+#define CPU_MASK_ALL \
+(cpumask_t) { { \
+ [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
+} }
+
+#else
+
+#define CPU_MASK_ALL \
+(cpumask_t) { { \
+ [0 ... BITS_TO_LONGS(NR_CPUS)-2] = ~0UL, \
+ [BITS_TO_LONGS(NR_CPUS)-1] = CPU_MASK_LAST_WORD \
+} }
+
+#endif
+
+#define CPU_MASK_NONE \
+(cpumask_t) { { \
+ [0 ... BITS_TO_LONGS(NR_CPUS)-1] = 0UL \
+} }
+
+#define CPU_MASK_CPU0 \
+(cpumask_t) { { \
+ [0] = 1UL \
+} }
+
+#if NR_CPUS == 1
+#define first_cpu(src) ({ (void)(src); 0; })
+#define next_cpu(n, src) ({ (void)(src); 1; })
+#define any_online_cpu(mask) 0
+#define for_each_cpu_mask(cpu, mask) \
+ for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask)
+#else /* NR_CPUS > 1 */
+int __first_cpu(const cpumask_t *srcp);
+int __next_cpu(int n, const cpumask_t *srcp);
+int __any_online_cpu(const cpumask_t *mask);
+
+#define first_cpu(src) __first_cpu(&(src))
+#define next_cpu(n, src) __next_cpu((n), &(src))
+#define any_online_cpu(mask) __any_online_cpu(&(mask))
+#define for_each_cpu_mask(cpu, mask) \
+ for ((cpu) = -1; \
+ (cpu) = next_cpu((cpu), (mask)), \
+ (cpu) < NR_CPUS; )
+#endif /* SMP */
+
+#if NR_CPUS <= 64
+
+#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask)
+
+#else /* NR_CPUS > 64 */
+
+int __next_cpu_nr(int n, const cpumask_t *srcp);
+#define for_each_cpu_mask_nr(cpu, mask) \
+ for ((cpu) = -1; \
+ (cpu) = __next_cpu_nr((cpu), &(mask)), \
+ (cpu) < nr_cpu_ids; )
+
+#endif /* NR_CPUS > 64 */
+
+#define cpus_addr(src) ((src).bits)
+
+#define cpu_set(cpu, dst) __cpu_set((cpu), &(dst))
+static inline void __cpu_set(int cpu, volatile cpumask_t *dstp)
+{
+ set_bit(cpu, dstp->bits);
+}
+
+#define cpu_clear(cpu, dst) __cpu_clear((cpu), &(dst))
+static inline void __cpu_clear(int cpu, volatile cpumask_t *dstp)
+{
+ clear_bit(cpu, dstp->bits);
+}
+
+#define cpus_setall(dst) __cpus_setall(&(dst), NR_CPUS)
+static inline void __cpus_setall(cpumask_t *dstp, int nbits)
+{
+ bitmap_fill(dstp->bits, nbits);
+}
+
+#define cpus_clear(dst) __cpus_clear(&(dst), NR_CPUS)
+static inline void __cpus_clear(cpumask_t *dstp, int nbits)
+{
+ bitmap_zero(dstp->bits, nbits);
+}
+
+/* No static inline type checking - see Subtlety (1) above. */
+#define cpu_isset(cpu, cpumask) test_bit((cpu), (cpumask).bits)
+
+#define cpu_test_and_set(cpu, cpumask) __cpu_test_and_set((cpu), &(cpumask))
+static inline int __cpu_test_and_set(int cpu, cpumask_t *addr)
+{
+ return test_and_set_bit(cpu, addr->bits);
+}
+
+#define cpus_and(dst, src1, src2) __cpus_and(&(dst), &(src1), &(src2), NR_CPUS)
+static inline int __cpus_and(cpumask_t *dstp, const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_and(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_or(dst, src1, src2) __cpus_or(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_or(cpumask_t *dstp, const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ bitmap_or(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_xor(dst, src1, src2) __cpus_xor(&(dst), &(src1), &(src2), NR_CPUS)
+static inline void __cpus_xor(cpumask_t *dstp, const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ bitmap_xor(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_andnot(dst, src1, src2) \
+ __cpus_andnot(&(dst), &(src1), &(src2), NR_CPUS)
+static inline int __cpus_andnot(cpumask_t *dstp, const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_andnot(dstp->bits, src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_equal(src1, src2) __cpus_equal(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_equal(const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_equal(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_intersects(src1, src2) __cpus_intersects(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_intersects(const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_intersects(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_subset(src1, src2) __cpus_subset(&(src1), &(src2), NR_CPUS)
+static inline int __cpus_subset(const cpumask_t *src1p,
+ const cpumask_t *src2p, int nbits)
+{
+ return bitmap_subset(src1p->bits, src2p->bits, nbits);
+}
+
+#define cpus_empty(src) __cpus_empty(&(src), NR_CPUS)
+static inline int __cpus_empty(const cpumask_t *srcp, int nbits)
+{
+ return bitmap_empty(srcp->bits, nbits);
+}
+
+#define cpus_weight(cpumask) __cpus_weight(&(cpumask), NR_CPUS)
+static inline int __cpus_weight(const cpumask_t *srcp, int nbits)
+{
+ return bitmap_weight(srcp->bits, nbits);
+}
+
+#define cpus_shift_left(dst, src, n) \
+ __cpus_shift_left(&(dst), &(src), (n), NR_CPUS)
+static inline void __cpus_shift_left(cpumask_t *dstp,
+ const cpumask_t *srcp, int n, int nbits)
+{
+ bitmap_shift_left(dstp->bits, srcp->bits, n, nbits);
+}
+#endif /* !CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS */
+
#endif /* __LINUX_CPUMASK_H */
extern void __validate_process_creds(struct task_struct *,
const char *, unsigned);
-static inline bool creds_are_invalid(const struct cred *cred)
-{
- if (cred->magic != CRED_MAGIC)
- return true;
- if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
- return true;
-#ifdef CONFIG_SECURITY_SELINUX
- if (selinux_is_enabled()) {
- if ((unsigned long) cred->security < PAGE_SIZE)
- return true;
- if ((*(u32 *)cred->security & 0xffffff00) ==
- (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8))
- return true;
- }
-#endif
- return false;
-}
+extern bool creds_are_invalid(const struct cred *cred);
static inline void __validate_creds(const struct cred *cred,
const char *file, unsigned line)
*/
#ifndef DCA_H
#define DCA_H
+
+#include <linux/pci.h>
+
/* DCA Provider API */
/* DCA Notifier Interface */
int id;
};
+struct dca_domain {
+ struct list_head node;
+ struct list_head dca_providers;
+ struct pci_bus *pci_rc;
+};
+
struct dca_ops {
int (*add_requester) (struct dca_provider *, struct device *);
int (*remove_requester) (struct dca_provider *, struct device *);
struct dca_provider *alloc_dca_provider(struct dca_ops *ops, int priv_size);
void free_dca_provider(struct dca_provider *dca);
int register_dca_provider(struct dca_provider *dca, struct device *dev);
-void unregister_dca_provider(struct dca_provider *dca);
+void unregister_dca_provider(struct dca_provider *dca, struct device *dev);
static inline void *dca_priv(struct dca_provider *dca)
{
* 2 as published by the Free Software Foundation.
*
* debugfs is for people to use instead of /proc or /sys.
- * See Documentation/DocBook/kernel-api for more details.
+ * See Documentation/DocBook/filesystems for more details.
*/
#ifndef _DEBUGFS_H_
struct bus_type *bus;
struct module *owner;
- const char *mod_name; /* used for built-in modules */
+ const char *mod_name; /* used for built-in modules */
+
+ bool suppress_bind_attrs; /* disables bind/unbind via sysfs */
int (*probe) (struct device *dev);
int (*remove) (struct device *dev);
/**
* enum dma_transaction_type - DMA transaction types/indexes
+ *
+ * Note: The DMA_ASYNC_TX capability is not to be set by drivers. It is
+ * automatically set as dma devices are registered.
*/
enum dma_transaction_type {
DMA_MEMCPY,
DMA_XOR,
- DMA_PQ_XOR,
- DMA_DUAL_XOR,
- DMA_PQ_UPDATE,
- DMA_ZERO_SUM,
- DMA_PQ_ZERO_SUM,
+ DMA_PQ,
+ DMA_XOR_VAL,
+ DMA_PQ_VAL,
DMA_MEMSET,
- DMA_MEMCPY_CRC32C,
DMA_INTERRUPT,
DMA_PRIVATE,
+ DMA_ASYNC_TX,
DMA_SLAVE,
};
/**
* enum dma_ctrl_flags - DMA flags to augment operation preparation,
- * control completion, and communicate status.
+ * control completion, and communicate status.
* @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of
- * this transaction
+ * this transaction
* @DMA_CTRL_ACK - the descriptor cannot be reused until the client
- * acknowledges receipt, i.e. has has a chance to establish any
- * dependency chains
+ * acknowledges receipt, i.e. has has a chance to establish any dependency
+ * chains
* @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
* @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
* @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
* (if not set, do the source dma-unmapping as page)
* @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
* (if not set, do the destination dma-unmapping as page)
+ * @DMA_PREP_PQ_DISABLE_P - prevent generation of P while generating Q
+ * @DMA_PREP_PQ_DISABLE_Q - prevent generation of Q while generating P
+ * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as
+ * sources that were the result of a previous operation, in the case of a PQ
+ * operation it continues the calculation with new sources
+ * @DMA_PREP_FENCE - tell the driver that subsequent operations depend
+ * on the result of this operation
*/
enum dma_ctrl_flags {
DMA_PREP_INTERRUPT = (1 << 0),
DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
+ DMA_PREP_PQ_DISABLE_P = (1 << 6),
+ DMA_PREP_PQ_DISABLE_Q = (1 << 7),
+ DMA_PREP_CONTINUE = (1 << 8),
+ DMA_PREP_FENCE = (1 << 9),
};
+/**
+ * enum sum_check_bits - bit position of pq_check_flags
+ */
+enum sum_check_bits {
+ SUM_CHECK_P = 0,
+ SUM_CHECK_Q = 1,
+};
+
+/**
+ * enum pq_check_flags - result of async_{xor,pq}_zero_sum operations
+ * @SUM_CHECK_P_RESULT - 1 if xor zero sum error, 0 otherwise
+ * @SUM_CHECK_Q_RESULT - 1 if reed-solomon zero sum error, 0 otherwise
+ */
+enum sum_check_flags {
+ SUM_CHECK_P_RESULT = (1 << SUM_CHECK_P),
+ SUM_CHECK_Q_RESULT = (1 << SUM_CHECK_Q),
+};
+
+
/**
* dma_cap_mask_t - capabilities bitmap modeled after cpumask_t.
* See linux/cpumask.h
* @flags: flags to augment operation preparation, control completion, and
* communicate status
* @phys: physical address of the descriptor
- * @tx_list: driver common field for operations that require multiple
- * descriptors
* @chan: target channel for this operation
* @tx_submit: set the prepared descriptor(s) to be executed by the engine
* @callback: routine to call after this operation is complete
dma_cookie_t cookie;
enum dma_ctrl_flags flags; /* not a 'long' to pack with cookie */
dma_addr_t phys;
- struct list_head tx_list;
struct dma_chan *chan;
dma_cookie_t (*tx_submit)(struct dma_async_tx_descriptor *tx);
dma_async_tx_callback callback;
* @global_node: list_head for global dma_device_list
* @cap_mask: one or more dma_capability flags
* @max_xor: maximum number of xor sources, 0 if no capability
+ * @max_pq: maximum number of PQ sources and PQ-continue capability
+ * @copy_align: alignment shift for memcpy operations
+ * @xor_align: alignment shift for xor operations
+ * @pq_align: alignment shift for pq operations
+ * @fill_align: alignment shift for memset operations
* @dev_id: unique device ID
* @dev: struct device reference for dma mapping api
* @device_alloc_chan_resources: allocate resources and return the
* @device_free_chan_resources: release DMA channel's resources
* @device_prep_dma_memcpy: prepares a memcpy operation
* @device_prep_dma_xor: prepares a xor operation
- * @device_prep_dma_zero_sum: prepares a zero_sum operation
+ * @device_prep_dma_xor_val: prepares a xor validation operation
+ * @device_prep_dma_pq: prepares a pq operation
+ * @device_prep_dma_pq_val: prepares a pqzero_sum operation
* @device_prep_dma_memset: prepares a memset operation
* @device_prep_dma_interrupt: prepares an end of chain interrupt operation
* @device_prep_slave_sg: prepares a slave dma operation
struct list_head channels;
struct list_head global_node;
dma_cap_mask_t cap_mask;
- int max_xor;
+ unsigned short max_xor;
+ unsigned short max_pq;
+ u8 copy_align;
+ u8 xor_align;
+ u8 pq_align;
+ u8 fill_align;
+ #define DMA_HAS_PQ_CONTINUE (1 << 15)
int dev_id;
struct device *dev;
struct dma_async_tx_descriptor *(*device_prep_dma_xor)(
struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src,
unsigned int src_cnt, size_t len, unsigned long flags);
- struct dma_async_tx_descriptor *(*device_prep_dma_zero_sum)(
+ struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)(
struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt,
- size_t len, u32 *result, unsigned long flags);
+ size_t len, enum sum_check_flags *result, unsigned long flags);
+ struct dma_async_tx_descriptor *(*device_prep_dma_pq)(
+ struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf,
+ size_t len, unsigned long flags);
+ struct dma_async_tx_descriptor *(*device_prep_dma_pq_val)(
+ struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src,
+ unsigned int src_cnt, const unsigned char *scf, size_t len,
+ enum sum_check_flags *pqres, unsigned long flags);
struct dma_async_tx_descriptor *(*device_prep_dma_memset)(
struct dma_chan *chan, dma_addr_t dest, int value, size_t len,
unsigned long flags);
void (*device_issue_pending)(struct dma_chan *chan);
};
+static inline bool dmaengine_check_align(u8 align, size_t off1, size_t off2, size_t len)
+{
+ size_t mask;
+
+ if (!align)
+ return true;
+ mask = (1 << align) - 1;
+ if (mask & (off1 | off2 | len))
+ return false;
+ return true;
+}
+
+static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1,
+ size_t off2, size_t len)
+{
+ return dmaengine_check_align(dev->copy_align, off1, off2, len);
+}
+
+static inline bool is_dma_xor_aligned(struct dma_device *dev, size_t off1,
+ size_t off2, size_t len)
+{
+ return dmaengine_check_align(dev->xor_align, off1, off2, len);
+}
+
+static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1,
+ size_t off2, size_t len)
+{
+ return dmaengine_check_align(dev->pq_align, off1, off2, len);
+}
+
+static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1,
+ size_t off2, size_t len)
+{
+ return dmaengine_check_align(dev->fill_align, off1, off2, len);
+}
+
+static inline void
+dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue)
+{
+ dma->max_pq = maxpq;
+ if (has_pq_continue)
+ dma->max_pq |= DMA_HAS_PQ_CONTINUE;
+}
+
+static inline bool dmaf_continue(enum dma_ctrl_flags flags)
+{
+ return (flags & DMA_PREP_CONTINUE) == DMA_PREP_CONTINUE;
+}
+
+static inline bool dmaf_p_disabled_continue(enum dma_ctrl_flags flags)
+{
+ enum dma_ctrl_flags mask = DMA_PREP_CONTINUE | DMA_PREP_PQ_DISABLE_P;
+
+ return (flags & mask) == mask;
+}
+
+static inline bool dma_dev_has_pq_continue(struct dma_device *dma)
+{
+ return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE;
+}
+
+static unsigned short dma_dev_to_maxpq(struct dma_device *dma)
+{
+ return dma->max_pq & ~DMA_HAS_PQ_CONTINUE;
+}
+
+/* dma_maxpq - reduce maxpq in the face of continued operations
+ * @dma - dma device with PQ capability
+ * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set
+ *
+ * When an engine does not support native continuation we need 3 extra
+ * source slots to reuse P and Q with the following coefficients:
+ * 1/ {00} * P : remove P from Q', but use it as a source for P'
+ * 2/ {01} * Q : use Q to continue Q' calculation
+ * 3/ {00} * Q : subtract Q from P' to cancel (2)
+ *
+ * In the case where P is disabled we only need 1 extra source:
+ * 1/ {01} * Q : use Q to continue Q' calculation
+ */
+static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags)
+{
+ if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags))
+ return dma_dev_to_maxpq(dma);
+ else if (dmaf_p_disabled_continue(flags))
+ return dma_dev_to_maxpq(dma) - 1;
+ else if (dmaf_continue(flags))
+ return dma_dev_to_maxpq(dma) - 3;
+ BUG();
+}
+
/* --- public DMA engine API --- */
#ifdef CONFIG_DMA_ENGINE
#ifdef CONFIG_ASYNC_TX_DMA
#define async_dmaengine_get() dmaengine_get()
#define async_dmaengine_put() dmaengine_put()
+#ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH
+#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX)
+#else
#define async_dma_find_channel(type) dma_find_channel(type)
+#endif /* CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH */
#else
static inline void async_dmaengine_get(void)
{
{
return NULL;
}
-#endif
+#endif /* CONFIG_ASYNC_TX_DMA */
dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan,
void *dest, void *src, size_t len);
#define NT_PPC_VSX 0x102 /* PowerPC VSX registers */
#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
+#define NT_PRXSTATUS 0x300 /* s390 upper register halves */
/* Note header in a PT_NOTE section */
#define FB_ACCEL_NEOMAGIC_NM2230 96 /* NeoMagic NM2230 */
#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */
#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */
+#define FB_ACCEL_PXA3XX 99 /* PXA3xx */
#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */
#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */
#define BLKTRACESTOP _IO(0x12,117)
#define BLKTRACETEARDOWN _IO(0x12,118)
#define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
#define FIBMAP _IO(0x00,1) /* bmap access */
int (*launder_page) (struct page *);
int (*is_partially_uptodate) (struct page *, read_descriptor_t *,
unsigned long);
+ int (*error_remove_page)(struct address_space *, struct page *);
};
/*
struct super_block * bd_super;
int bd_openers;
struct mutex bd_mutex; /* open/close mutex */
- struct semaphore bd_mount_sem;
struct list_head bd_inodes;
void * bd_holder;
int bd_holders;
unsigned long s_blocksize;
unsigned char s_blocksize_bits;
unsigned char s_dirt;
- unsigned long long s_maxbytes; /* Max file size */
+ loff_t s_maxbytes; /* Max file size */
struct file_system_type *s_type;
const struct super_operations *s_op;
const struct dquot_operations *dq_op;
extern int inode_needs_sync(struct inode *inode);
extern void generic_delete_inode(struct inode *inode);
extern void generic_drop_inode(struct inode *inode);
+extern int generic_detach_inode(struct inode *inode);
extern struct inode *ilookup5_nowait(struct super_block *sb,
unsigned long hashval, int (*test)(struct inode *, void *),
extern void put_filesystem(struct file_system_type *fs);
extern struct file_system_type *get_fs_type(const char *name);
extern struct super_block *get_super(struct block_device *);
+extern struct super_block *get_active_super(struct block_device *bdev);
extern struct super_block *user_get_super(dev_t);
extern void drop_super(struct super_block *sb);
#define buffer_migrate_page NULL
#endif
-extern int inode_change_ok(struct inode *, struct iattr *);
+extern int inode_change_ok(const struct inode *, struct iattr *);
+extern int inode_newsize_ok(const struct inode *, loff_t offset);
extern int __must_check inode_setattr(struct inode *, struct iattr *);
extern void file_update_time(struct file *file);
__simple_attr_check_format(__fmt, 0ull); \
return simple_attr_open(inode, file, __get, __set, __fmt); \
} \
-static struct file_operations __fops = { \
+static const struct file_operations __fops = { \
.owner = THIS_MODULE, \
.open = __fops ## _open, \
.release = simple_attr_release, \
size_t len, loff_t *ppos);
struct ctl_table;
-int proc_nr_files(struct ctl_table *table, int write, struct file *filp,
+int proc_nr_files(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
int __init get_filesystem_list(char *buf);
extern int ftrace_enabled;
extern int
ftrace_enable_sysctl(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
typedef void (*ftrace_func_t)(unsigned long ip, unsigned long parent_ip);
extern int stack_tracer_enabled;
int
stack_trace_sysctl(struct ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
#endif
# define ftrace_set_filter(buf, len, reset) do { } while (0)
# define ftrace_disable_daemon() do { } while (0)
# define ftrace_enable_daemon() do { } while (0)
-static inline void ftrace_release(void *start, unsigned long size) { }
+static inline void ftrace_release_mod(struct module *mod) {}
static inline int register_ftrace_command(struct ftrace_func_command *cmd)
{
return -EINVAL;
#include <linux/compiler.h>
#include <linux/types.h>
-struct inode;
-struct mm_struct;
-struct task_struct;
-union ktime;
-
/* Second argument to futex syscall */
#define FUTEX_LOCK_PI_PRIVATE (FUTEX_LOCK_PI | FUTEX_PRIVATE_FLAG)
#define FUTEX_UNLOCK_PI_PRIVATE (FUTEX_UNLOCK_PI | FUTEX_PRIVATE_FLAG)
#define FUTEX_TRYLOCK_PI_PRIVATE (FUTEX_TRYLOCK_PI | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITS | FUTEX_PRIVATE_FLAG)
-#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITS | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAIT_BITSET_PRIVATE (FUTEX_WAIT_BITSET | FUTEX_PRIVATE_FLAG)
+#define FUTEX_WAKE_BITSET_PRIVATE (FUTEX_WAKE_BITSET | FUTEX_PRIVATE_FLAG)
#define FUTEX_WAIT_REQUEUE_PI_PRIVATE (FUTEX_WAIT_REQUEUE_PI | \
FUTEX_PRIVATE_FLAG)
#define FUTEX_CMP_REQUEUE_PI_PRIVATE (FUTEX_CMP_REQUEUE_PI | \
#define FUTEX_BITSET_MATCH_ANY 0xffffffff
#ifdef __KERNEL__
+struct inode;
+struct mm_struct;
+struct task_struct;
+union ktime;
+
long do_futex(u32 __user *uaddr, int op, u32 val, union ktime *timeout,
u32 __user *uaddr2, u32 val2, u32 val3);
#include <linux/fs.h>
+struct ctl_table;
+struct user_struct;
+
#ifdef CONFIG_HUGETLB_PAGE
#include <linux/mempolicy.h>
#include <linux/shm.h>
#include <asm/tlbflush.h>
-struct ctl_table;
-struct user_struct;
-
int PageHuge(struct page *page);
static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
}
void reset_vma_resv_huge_pages(struct vm_area_struct *vma);
-int hugetlb_sysctl_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
-int hugetlb_overcommit_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
-int hugetlb_treat_movable_handler(struct ctl_table *, int, struct file *, void __user *, size_t *, loff_t *);
+int hugetlb_sysctl_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+int hugetlb_overcommit_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
+int hugetlb_treat_movable_handler(struct ctl_table *, int, void __user *, size_t *, loff_t *);
int copy_hugetlb_page_range(struct mm_struct *, struct mm_struct *, struct vm_area_struct *);
int follow_hugetlb_page(struct mm_struct *, struct vm_area_struct *,
struct page **, struct vm_area_struct **,
}
extern const struct file_operations hugetlbfs_file_operations;
-extern struct vm_operations_struct hugetlb_vm_ops;
+extern const struct vm_operations_struct hugetlb_vm_ops;
struct file *hugetlb_file_setup(const char *name, size_t size, int acct,
struct user_struct **user, int creat_flags);
int hugetlb_get_quota(struct address_space *mapping, long delta);
#define is_file_hugepages(file) 0
#define set_file_hugepages(file) BUG()
-#define hugetlb_file_setup(name,size,acct,user,creat) ERR_PTR(-ENOSYS)
+static inline struct file *hugetlb_file_setup(const char *name, size_t size,
+ int acctflag, struct user_struct **user, int creat_flags)
+{
+ return ERR_PTR(-ENOSYS);
+}
#endif /* !CONFIG_HUGETLBFS */
--- /dev/null
+/*
+ * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ADP5588_H
+#define _ADP5588_H
+
+#define DEV_ID 0x00 /* Device ID */
+#define CFG 0x01 /* Configuration Register1 */
+#define INT_STAT 0x02 /* Interrupt Status Register */
+#define KEY_LCK_EC_STAT 0x03 /* Key Lock and Event Counter Register */
+#define Key_EVENTA 0x04 /* Key Event Register A */
+#define Key_EVENTB 0x05 /* Key Event Register B */
+#define Key_EVENTC 0x06 /* Key Event Register C */
+#define Key_EVENTD 0x07 /* Key Event Register D */
+#define Key_EVENTE 0x08 /* Key Event Register E */
+#define Key_EVENTF 0x09 /* Key Event Register F */
+#define Key_EVENTG 0x0A /* Key Event Register G */
+#define Key_EVENTH 0x0B /* Key Event Register H */
+#define Key_EVENTI 0x0C /* Key Event Register I */
+#define Key_EVENTJ 0x0D /* Key Event Register J */
+#define KP_LCK_TMR 0x0E /* Keypad Lock1 to Lock2 Timer */
+#define UNLOCK1 0x0F /* Unlock Key1 */
+#define UNLOCK2 0x10 /* Unlock Key2 */
+#define GPIO_INT_STAT1 0x11 /* GPIO Interrupt Status */
+#define GPIO_INT_STAT2 0x12 /* GPIO Interrupt Status */
+#define GPIO_INT_STAT3 0x13 /* GPIO Interrupt Status */
+#define GPIO_DAT_STAT1 0x14 /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT2 0x15 /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT3 0x16 /* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_OUT1 0x17 /* GPIO DATA OUT */
+#define GPIO_DAT_OUT2 0x18 /* GPIO DATA OUT */
+#define GPIO_DAT_OUT3 0x19 /* GPIO DATA OUT */
+#define GPIO_INT_EN1 0x1A /* GPIO Interrupt Enable */
+#define GPIO_INT_EN2 0x1B /* GPIO Interrupt Enable */
+#define GPIO_INT_EN3 0x1C /* GPIO Interrupt Enable */
+#define KP_GPIO1 0x1D /* Keypad or GPIO Selection */
+#define KP_GPIO2 0x1E /* Keypad or GPIO Selection */
+#define KP_GPIO3 0x1F /* Keypad or GPIO Selection */
+#define GPI_EM1 0x20 /* GPI Event Mode 1 */
+#define GPI_EM2 0x21 /* GPI Event Mode 2 */
+#define GPI_EM3 0x22 /* GPI Event Mode 3 */
+#define GPIO_DIR1 0x23 /* GPIO Data Direction */
+#define GPIO_DIR2 0x24 /* GPIO Data Direction */
+#define GPIO_DIR3 0x25 /* GPIO Data Direction */
+#define GPIO_INT_LVL1 0x26 /* GPIO Edge/Level Detect */
+#define GPIO_INT_LVL2 0x27 /* GPIO Edge/Level Detect */
+#define GPIO_INT_LVL3 0x28 /* GPIO Edge/Level Detect */
+#define Debounce_DIS1 0x29 /* Debounce Disable */
+#define Debounce_DIS2 0x2A /* Debounce Disable */
+#define Debounce_DIS3 0x2B /* Debounce Disable */
+#define GPIO_PULL1 0x2C /* GPIO Pull Disable */
+#define GPIO_PULL2 0x2D /* GPIO Pull Disable */
+#define GPIO_PULL3 0x2E /* GPIO Pull Disable */
+#define CMP_CFG_STAT 0x30 /* Comparator Configuration and Status Register */
+#define CMP_CONFG_SENS1 0x31 /* Sensor1 Comparator Configuration Register */
+#define CMP_CONFG_SENS2 0x32 /* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */
+#define CMP1_LVL2_TRIP 0x33 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */
+#define CMP1_LVL2_HYS 0x34 /* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */
+#define CMP1_LVL3_TRIP 0x35 /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */
+#define CMP1_LVL3_HYS 0x36 /* Sensor 2 Comparator Configuration Register */
+#define CMP2_LVL2_TRIP 0x37 /* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */
+#define CMP2_LVL2_HYS 0x38 /* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */
+#define CMP2_LVL3_TRIP 0x39 /* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */
+#define CMP2_LVL3_HYS 0x3A /* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */
+#define CMP1_ADC_DAT_R1 0x3B /* Comparator 1 ADC data Register1 */
+#define CMP1_ADC_DAT_R2 0x3C /* Comparator 1 ADC data Register2 */
+#define CMP2_ADC_DAT_R1 0x3D /* Comparator 2 ADC data Register1 */
+#define CMP2_ADC_DAT_R2 0x3E /* Comparator 2 ADC data Register2 */
+
+#define ADP5588_DEVICE_ID_MASK 0xF
+
+/* Put one of these structures in i2c_board_info platform_data */
+
+#define ADP5588_KEYMAPSIZE 80
+
+struct adp5588_kpad_platform_data {
+ int rows; /* Number of rows */
+ int cols; /* Number of columns */
+ const unsigned short *keymap; /* Pointer to keymap */
+ unsigned short keymapsize; /* Keymap size */
+ unsigned repeat:1; /* Enable key repeat */
+ unsigned en_keylock:1; /* Enable Key Lock feature */
+ unsigned short unlock_key1; /* Unlock Key 1 */
+ unsigned short unlock_key2; /* Unlock Key 2 */
+};
+
+#endif
--- /dev/null
+/*
+ * mcs5000_ts.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MCS5000_TS_H
+#define __LINUX_MCS5000_TS_H
+
+/* platform data for the MELFAS MCS-5000 touchscreen driver */
+struct mcs5000_ts_platform_data {
+ void (*cfg_pin)(void);
+ int x_size;
+ int y_size;
+};
+
+#endif /* __LINUX_MCS5000_TS_H */
int irq_line;
};
-/* Boards have uniqe mappings of {col, row} --> keycode.
- * Column and row are 4 bits, but range only from 0..7.
+/* Boards have uniqe mappings of {row, col} --> keycode.
+ * Column and row are 8 bits each, but range only from 0..7.
* a PERSISTENT_KEY is "always on" and never reported.
*/
-#define PERSISTENT_KEY(c, r) KEY((c), (r), KEY_RESERVED)
+#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED)
struct twl4030_keypad_data {
const struct matrix_keymap_data *keymap_data;
* the Free Software Foundation.
*/
+#include <linux/types.h>
/*
* Standard commands.
#define I8042_CMD_MUX_PFX 0x0090
#define I8042_CMD_MUX_SEND 0x1090
+struct serio;
+
+#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
+
+void i8042_lock_chip(void);
+void i8042_unlock_chip(void);
int i8042_command(unsigned char *param, int command);
+bool i8042_check_port_owner(const struct serio *);
+
+#else
+
+void i8042_lock_chip(void)
+{
+}
+
+void i8042_unlock_chip(void)
+{
+}
+
+int i8042_command(unsigned char *param, int command)
+{
+ return -ENOSYS;
+}
+
+bool i8042_check_port_owner(const struct serio *serio)
+{
+ return false;
+}
+
+#endif
#endif
__u16 flags;
__u16 __reserved;
__u32 datalen;
- __u32 rs_delay;
+ __u32 __reserved2;
/* data follows */
};
#else /* MODULE */
/* Don't use these in modules, but some people do... */
+#define early_initcall(fn) module_init(fn)
#define core_initcall(fn) module_init(fn)
#define postcore_initcall(fn) module_init(fn)
#define arch_initcall(fn) module_init(fn)
struct mutex mutex;
unsigned int users;
- int going_away;
+ bool going_away;
struct device dev;
#include <linux/irqreturn.h>
#include <linux/irqnr.h>
#include <linux/hardirq.h>
-#include <linux/sched.h>
#include <linux/irqflags.h>
#include <linux/smp.h>
#include <linux/percpu.h>
* struct irqaction - per interrupt action descriptor
* @handler: interrupt handler function
* @flags: flags (see IRQF_* above)
- * @mask: no comment as it is useless and about to be removed
* @name: name of the device
* @dev_id: cookie to identify the device
* @next: pointer to the next irqaction for shared interrupts
struct irqaction {
irq_handler_t handler;
unsigned long flags;
- cpumask_t mask;
const char *name;
void *dev_id;
struct irqaction *next;
static inline void debug_poll_all_shared_irqs(void) { }
#endif
+struct seq_file;
int show_interrupts(struct seq_file *p, void *v);
struct irq_desc;
#define IPCCALL(version,op) ((version)<<16 | (op))
#ifdef __KERNEL__
-
-#include <linux/kref.h>
#include <linux/spinlock.h>
#define IPCMNI 32768 /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
*/
struct transaction_chp_stats_s {
unsigned long cs_chp_time;
- unsigned long cs_forced_to_close;
- unsigned long cs_written;
- unsigned long cs_dropped;
+ __u32 cs_forced_to_close;
+ __u32 cs_written;
+ __u32 cs_dropped;
};
/* The transaction_t type is the guts of the journaling mechanism. It
unsigned long rs_flushing;
unsigned long rs_logging;
- unsigned long rs_handle_count;
- unsigned long rs_blocks;
- unsigned long rs_blocks_logged;
+ __u32 rs_handle_count;
+ __u32 rs_blocks;
+ __u32 rs_blocks_logged;
};
struct transaction_stats_s {
- int ts_type;
unsigned long ts_tid;
- union {
- struct transaction_run_stats_s run;
- struct transaction_chp_stats_s chp;
- } u;
+ struct transaction_run_stats_s run;
};
-#define JBD2_STATS_RUN 1
-#define JBD2_STATS_CHECKPOINT 2
-
static inline unsigned long
jbd2_time_diff(unsigned long start, unsigned long end)
{
/*
* Journal statistics
*/
- struct transaction_stats_s *j_history;
- int j_history_max;
- int j_history_cur;
- /*
- * Protect the transactions statistics history
- */
spinlock_t j_history_lock;
struct proc_dir_entry *j_proc_entry;
struct transaction_stats_s j_stats;
#endif /* __KERNEL__ */
+#ifndef __EXPORTED_HEADERS__
+#ifndef __KERNEL__
+#warning Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders
+#endif /* __KERNEL__ */
+#endif /* __EXPORTED_HEADERS__ */
+
#define SI_LOAD_SHIFT 16
struct sysinfo {
long uptime; /* Seconds since boot */
#define _KREF_H_
#include <linux/types.h>
-#include <asm/atomic.h>
struct kref {
atomic_t refcount;
ATA_TIMING_ACTIVE | ATA_TIMING_RECOVER |
ATA_TIMING_DMACK_HOLD | ATA_TIMING_CYCLE |
ATA_TIMING_UDMA,
+
+ /* ACPI constants */
+ ATA_ACPI_FILTER_SETXFER = 1 << 0,
+ ATA_ACPI_FILTER_LOCK = 1 << 1,
+ ATA_ACPI_FILTER_DIPM = 1 << 2,
+ ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3, /* FPDMA non-zero offset */
+ ATA_ACPI_FILTER_FPDMA_AA = 1 << 4, /* FPDMA auto activate */
+
+ ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
+ ATA_ACPI_FILTER_LOCK |
+ ATA_ACPI_FILTER_DIPM,
};
enum ata_xfer_mask {
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
union acpi_object *gtf_cache;
+ unsigned int gtf_filter;
#endif
/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
u64 n_sectors; /* size of device, if ATA */
void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
+void ps2_begin_command(struct ps2dev *ps2dev);
+void ps2_end_command(struct ps2dev *ps2dev);
int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);
#ifdef __ASSEMBLY__
+#ifndef LINKER_SCRIPT
#define ALIGN __ALIGN
#define ALIGN_STR __ALIGN_STR
ALIGN; \
name:
#endif
+#endif /* LINKER_SCRIPT */
#ifndef WEAK
#define WEAK(name) \
extern bool mem_cgroup_oom_called(struct task_struct *task);
void mem_cgroup_update_mapped_file_stat(struct page *page, int val);
+unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
+ gfp_t gfp_mask, int nid,
+ int zid);
#else /* CONFIG_CGROUP_MEM_RES_CTLR */
struct mem_cgroup;
{
}
+static inline
+unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
+ gfp_t gfp_mask, int nid, int zid)
+{
+ return 0;
+}
+
#endif /* CONFIG_CGROUP_MEM_CONT */
#endif /* _LINUX_MEMCONTROL_H */
--- /dev/null
+/*
+ * include/linux/mfd/wm831x/pmu.h -- PMU for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_PMU_H__
+#define __MFD_WM831X_PMU_H__
+
+/*
+ * R16387 (0x4003) - Power State
+ */
+#define WM831X_CHIP_ON 0x8000 /* CHIP_ON */
+#define WM831X_CHIP_ON_MASK 0x8000 /* CHIP_ON */
+#define WM831X_CHIP_ON_SHIFT 15 /* CHIP_ON */
+#define WM831X_CHIP_ON_WIDTH 1 /* CHIP_ON */
+#define WM831X_CHIP_SLP 0x4000 /* CHIP_SLP */
+#define WM831X_CHIP_SLP_MASK 0x4000 /* CHIP_SLP */
+#define WM831X_CHIP_SLP_SHIFT 14 /* CHIP_SLP */
+#define WM831X_CHIP_SLP_WIDTH 1 /* CHIP_SLP */
+#define WM831X_REF_LP 0x1000 /* REF_LP */
+#define WM831X_REF_LP_MASK 0x1000 /* REF_LP */
+#define WM831X_REF_LP_SHIFT 12 /* REF_LP */
+#define WM831X_REF_LP_WIDTH 1 /* REF_LP */
+#define WM831X_PWRSTATE_DLY_MASK 0x0C00 /* PWRSTATE_DLY - [11:10] */
+#define WM831X_PWRSTATE_DLY_SHIFT 10 /* PWRSTATE_DLY - [11:10] */
+#define WM831X_PWRSTATE_DLY_WIDTH 2 /* PWRSTATE_DLY - [11:10] */
+#define WM831X_SWRST_DLY 0x0200 /* SWRST_DLY */
+#define WM831X_SWRST_DLY_MASK 0x0200 /* SWRST_DLY */
+#define WM831X_SWRST_DLY_SHIFT 9 /* SWRST_DLY */
+#define WM831X_SWRST_DLY_WIDTH 1 /* SWRST_DLY */
+#define WM831X_USB100MA_STARTUP_MASK 0x0030 /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB100MA_STARTUP_SHIFT 4 /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB100MA_STARTUP_WIDTH 2 /* USB100MA_STARTUP - [5:4] */
+#define WM831X_USB_CURR_STS 0x0008 /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_MASK 0x0008 /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_SHIFT 3 /* USB_CURR_STS */
+#define WM831X_USB_CURR_STS_WIDTH 1 /* USB_CURR_STS */
+#define WM831X_USB_ILIM_MASK 0x0007 /* USB_ILIM - [2:0] */
+#define WM831X_USB_ILIM_SHIFT 0 /* USB_ILIM - [2:0] */
+#define WM831X_USB_ILIM_WIDTH 3 /* USB_ILIM - [2:0] */
+
+/*
+ * R16397 (0x400D) - System Status
+ */
+#define WM831X_THW_STS 0x8000 /* THW_STS */
+#define WM831X_THW_STS_MASK 0x8000 /* THW_STS */
+#define WM831X_THW_STS_SHIFT 15 /* THW_STS */
+#define WM831X_THW_STS_WIDTH 1 /* THW_STS */
+#define WM831X_PWR_SRC_BATT 0x0400 /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_MASK 0x0400 /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_SHIFT 10 /* PWR_SRC_BATT */
+#define WM831X_PWR_SRC_BATT_WIDTH 1 /* PWR_SRC_BATT */
+#define WM831X_PWR_WALL 0x0200 /* PWR_WALL */
+#define WM831X_PWR_WALL_MASK 0x0200 /* PWR_WALL */
+#define WM831X_PWR_WALL_SHIFT 9 /* PWR_WALL */
+#define WM831X_PWR_WALL_WIDTH 1 /* PWR_WALL */
+#define WM831X_PWR_USB 0x0100 /* PWR_USB */
+#define WM831X_PWR_USB_MASK 0x0100 /* PWR_USB */
+#define WM831X_PWR_USB_SHIFT 8 /* PWR_USB */
+#define WM831X_PWR_USB_WIDTH 1 /* PWR_USB */
+#define WM831X_MAIN_STATE_MASK 0x001F /* MAIN_STATE - [4:0] */
+#define WM831X_MAIN_STATE_SHIFT 0 /* MAIN_STATE - [4:0] */
+#define WM831X_MAIN_STATE_WIDTH 5 /* MAIN_STATE - [4:0] */
+
+/*
+ * R16456 (0x4048) - Charger Control 1
+ */
+#define WM831X_CHG_ENA 0x8000 /* CHG_ENA */
+#define WM831X_CHG_ENA_MASK 0x8000 /* CHG_ENA */
+#define WM831X_CHG_ENA_SHIFT 15 /* CHG_ENA */
+#define WM831X_CHG_ENA_WIDTH 1 /* CHG_ENA */
+#define WM831X_CHG_FRC 0x4000 /* CHG_FRC */
+#define WM831X_CHG_FRC_MASK 0x4000 /* CHG_FRC */
+#define WM831X_CHG_FRC_SHIFT 14 /* CHG_FRC */
+#define WM831X_CHG_FRC_WIDTH 1 /* CHG_FRC */
+#define WM831X_CHG_ITERM_MASK 0x1C00 /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_ITERM_SHIFT 10 /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_ITERM_WIDTH 3 /* CHG_ITERM - [12:10] */
+#define WM831X_CHG_FAST 0x0020 /* CHG_FAST */
+#define WM831X_CHG_FAST_MASK 0x0020 /* CHG_FAST */
+#define WM831X_CHG_FAST_SHIFT 5 /* CHG_FAST */
+#define WM831X_CHG_FAST_WIDTH 1 /* CHG_FAST */
+#define WM831X_CHG_IMON_ENA 0x0002 /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_MASK 0x0002 /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_SHIFT 1 /* CHG_IMON_ENA */
+#define WM831X_CHG_IMON_ENA_WIDTH 1 /* CHG_IMON_ENA */
+#define WM831X_CHG_CHIP_TEMP_MON 0x0001 /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_MASK 0x0001 /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_SHIFT 0 /* CHG_CHIP_TEMP_MON */
+#define WM831X_CHG_CHIP_TEMP_MON_WIDTH 1 /* CHG_CHIP_TEMP_MON */
+
+/*
+ * R16457 (0x4049) - Charger Control 2
+ */
+#define WM831X_CHG_OFF_MSK 0x4000 /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_MASK 0x4000 /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_SHIFT 14 /* CHG_OFF_MSK */
+#define WM831X_CHG_OFF_MSK_WIDTH 1 /* CHG_OFF_MSK */
+#define WM831X_CHG_TIME_MASK 0x0F00 /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TIME_SHIFT 8 /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TIME_WIDTH 4 /* CHG_TIME - [11:8] */
+#define WM831X_CHG_TRKL_ILIM_MASK 0x00C0 /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_TRKL_ILIM_SHIFT 6 /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_TRKL_ILIM_WIDTH 2 /* CHG_TRKL_ILIM - [7:6] */
+#define WM831X_CHG_VSEL_MASK 0x0030 /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_VSEL_SHIFT 4 /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_VSEL_WIDTH 2 /* CHG_VSEL - [5:4] */
+#define WM831X_CHG_FAST_ILIM_MASK 0x000F /* CHG_FAST_ILIM - [3:0] */
+#define WM831X_CHG_FAST_ILIM_SHIFT 0 /* CHG_FAST_ILIM - [3:0] */
+#define WM831X_CHG_FAST_ILIM_WIDTH 4 /* CHG_FAST_ILIM - [3:0] */
+
+/*
+ * R16458 (0x404A) - Charger Status
+ */
+#define WM831X_BATT_OV_STS 0x8000 /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_MASK 0x8000 /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_SHIFT 15 /* BATT_OV_STS */
+#define WM831X_BATT_OV_STS_WIDTH 1 /* BATT_OV_STS */
+#define WM831X_CHG_STATE_MASK 0x7000 /* CHG_STATE - [14:12] */
+#define WM831X_CHG_STATE_SHIFT 12 /* CHG_STATE - [14:12] */
+#define WM831X_CHG_STATE_WIDTH 3 /* CHG_STATE - [14:12] */
+#define WM831X_BATT_HOT_STS 0x0800 /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_MASK 0x0800 /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_SHIFT 11 /* BATT_HOT_STS */
+#define WM831X_BATT_HOT_STS_WIDTH 1 /* BATT_HOT_STS */
+#define WM831X_BATT_COLD_STS 0x0400 /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_MASK 0x0400 /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_SHIFT 10 /* BATT_COLD_STS */
+#define WM831X_BATT_COLD_STS_WIDTH 1 /* BATT_COLD_STS */
+#define WM831X_CHG_TOPOFF 0x0200 /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_MASK 0x0200 /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_SHIFT 9 /* CHG_TOPOFF */
+#define WM831X_CHG_TOPOFF_WIDTH 1 /* CHG_TOPOFF */
+#define WM831X_CHG_ACTIVE 0x0100 /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_MASK 0x0100 /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_SHIFT 8 /* CHG_ACTIVE */
+#define WM831X_CHG_ACTIVE_WIDTH 1 /* CHG_ACTIVE */
+#define WM831X_CHG_TIME_ELAPSED_MASK 0x00FF /* CHG_TIME_ELAPSED - [7:0] */
+#define WM831X_CHG_TIME_ELAPSED_SHIFT 0 /* CHG_TIME_ELAPSED - [7:0] */
+#define WM831X_CHG_TIME_ELAPSED_WIDTH 8 /* CHG_TIME_ELAPSED - [7:0] */
+
+#define WM831X_CHG_STATE_OFF (0 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_TRICKLE (1 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_FAST (2 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_TRICKLE_OT (3 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_FAST_OT (4 << WM831X_CHG_STATE_SHIFT)
+#define WM831X_CHG_STATE_DEFECTIVE (5 << WM831X_CHG_STATE_SHIFT)
+
+/*
+ * R16459 (0x404B) - Backup Charger Control
+ */
+#define WM831X_BKUP_CHG_ENA 0x8000 /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_MASK 0x8000 /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_SHIFT 15 /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_ENA_WIDTH 1 /* BKUP_CHG_ENA */
+#define WM831X_BKUP_CHG_STS 0x4000 /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_MASK 0x4000 /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_SHIFT 14 /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_STS_WIDTH 1 /* BKUP_CHG_STS */
+#define WM831X_BKUP_CHG_MODE 0x1000 /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_MASK 0x1000 /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_SHIFT 12 /* BKUP_CHG_MODE */
+#define WM831X_BKUP_CHG_MODE_WIDTH 1 /* BKUP_CHG_MODE */
+#define WM831X_BKUP_BATT_DET_ENA 0x0800 /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_MASK 0x0800 /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_SHIFT 11 /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_DET_ENA_WIDTH 1 /* BKUP_BATT_DET_ENA */
+#define WM831X_BKUP_BATT_STS 0x0400 /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_MASK 0x0400 /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_SHIFT 10 /* BKUP_BATT_STS */
+#define WM831X_BKUP_BATT_STS_WIDTH 1 /* BKUP_BATT_STS */
+#define WM831X_BKUP_CHG_VLIM 0x0010 /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_MASK 0x0010 /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_SHIFT 4 /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_VLIM_WIDTH 1 /* BKUP_CHG_VLIM */
+#define WM831X_BKUP_CHG_ILIM_MASK 0x0003 /* BKUP_CHG_ILIM - [1:0] */
+#define WM831X_BKUP_CHG_ILIM_SHIFT 0 /* BKUP_CHG_ILIM - [1:0] */
+#define WM831X_BKUP_CHG_ILIM_WIDTH 2 /* BKUP_CHG_ILIM - [1:0] */
+
+#endif
--- /dev/null
+/*
+ * include/linux/mfd/wm831x/status.h -- Status LEDs for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_STATUS_H__
+#define __MFD_WM831X_STATUS_H__
+
+#define WM831X_LED_SRC_MASK 0xC000 /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_SHIFT 14 /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_WIDTH 2 /* LED_SRC - [15:14] */
+#define WM831X_LED_MODE_MASK 0x0300 /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_SHIFT 8 /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_WIDTH 2 /* LED_MODE - [9:8] */
+#define WM831X_LED_SEQ_LEN_MASK 0x0030 /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_SHIFT 4 /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_WIDTH 2 /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_DUR_MASK 0x000C /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_SHIFT 2 /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_WIDTH 2 /* LED_DUR - [3:2] */
+#define WM831X_LED_DUTY_CYC_MASK 0x0003 /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_SHIFT 0 /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_WIDTH 2 /* LED_DUTY_CYC - [1:0] */
+
+#endif
#ifdef CONFIG_MMU
extern int is_vmalloc_or_module_addr(const void *x);
#else
-static int is_vmalloc_or_module_addr(const void *x)
+static inline int is_vmalloc_or_module_addr(const void *x)
{
return 0;
}
#define VM_FAULT_SIGBUS 0x0002
#define VM_FAULT_MAJOR 0x0004
#define VM_FAULT_WRITE 0x0008 /* Special case for get_user_pages */
+#define VM_FAULT_HWPOISON 0x0010 /* Hit poisoned page */
#define VM_FAULT_NOPAGE 0x0100 /* ->fault installed the pte, not return page */
#define VM_FAULT_LOCKED 0x0200 /* ->fault locked the returned page */
-#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS)
+#define VM_FAULT_ERROR (VM_FAULT_OOM | VM_FAULT_SIGBUS | VM_FAULT_HWPOISON)
/*
* Can be called by the pagefault handler when it gets a VM_FAULT_OOM.
unmap_mapping_range(mapping, holebegin, holelen, 0);
}
-extern int vmtruncate(struct inode * inode, loff_t offset);
-extern int vmtruncate_range(struct inode * inode, loff_t offset, loff_t end);
+extern void truncate_pagecache(struct inode *inode, loff_t old, loff_t new);
+extern int vmtruncate(struct inode *inode, loff_t offset);
+extern int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end);
+
+int truncate_inode_page(struct address_space *mapping, struct page *page);
+int generic_error_remove_page(struct address_space *mapping, struct page *page);
+
+int invalidate_inode_page(struct page *page);
#ifdef CONFIG_MMU
extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct *vma,
#define in_gate_area(task, addr) ({(void)task; in_gate_area_no_task(addr);})
#endif /* __HAVE_ARCH_GATE_AREA */
-int drop_caches_sysctl_handler(struct ctl_table *, int, struct file *,
+int drop_caches_sysctl_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
unsigned long shrink_slab(unsigned long scanned, gfp_t gfp_mask,
unsigned long lru_pages);
extern int account_locked_memory(struct mm_struct *mm, struct rlimit *rlim,
size_t size);
extern void refund_locked_memory(struct mm_struct *mm, size_t size);
+
+extern void memory_failure(unsigned long pfn, int trapno);
+extern int __memory_failure(unsigned long pfn, int trapno, int ref);
+extern int sysctl_memory_failure_early_kill;
+extern int sysctl_memory_failure_recovery;
+extern atomic_long_t mce_bad_pages;
+
#endif /* __KERNEL__ */
#endif /* _LINUX_MM_H */
struct anon_vma *anon_vma; /* Serialized by page_table_lock */
/* Function pointers to deal with this struct. */
- struct vm_operations_struct * vm_ops;
+ const struct vm_operations_struct *vm_ops;
/* Information about our backing store: */
unsigned long vm_pgoff; /* Offset (within vm_file) in PAGE_SIZE
unsigned long saved_auxv[AT_VECTOR_SIZE]; /* for /proc/PID/auxv */
+ struct linux_binfmt *binfmt;
+
cpumask_t cpu_vm_mask;
/* Architecture-specific MM context */
unsigned long flags; /* Must use atomic bitops to access the bits */
struct core_state *core_state; /* coredumping support */
-
- /* aio bits */
+#ifdef CONFIG_AIO
spinlock_t ioctx_lock;
struct hlist_head ioctx_list;
-
+#endif
#ifdef CONFIG_MM_OWNER
/*
* "owner" points to a task that is regarded as the canonical
#define LINUX_MMC_HOST_H
#include <linux/leds.h>
+#include <linux/sched.h>
#include <linux/mmc/core.h>
/* These two functions are used to setup the per zone pages min values */
struct ctl_table;
-struct file;
-int min_free_kbytes_sysctl_handler(struct ctl_table *, int, struct file *,
+int min_free_kbytes_sysctl_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
extern int sysctl_lowmem_reserve_ratio[MAX_NR_ZONES-1];
-int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int, struct file *,
+int lowmem_reserve_ratio_sysctl_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int, struct file *,
+int percpu_pagelist_fraction_sysctl_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
int sysctl_min_unmapped_ratio_sysctl_handler(struct ctl_table *, int,
- struct file *, void __user *, size_t *, loff_t *);
+ void __user *, size_t *, loff_t *);
int sysctl_min_slab_ratio_sysctl_handler(struct ctl_table *, int,
- struct file *, void __user *, size_t *, loff_t *);
+ void __user *, size_t *, loff_t *);
extern int numa_zonelist_order_handler(struct ctl_table *, int,
- struct file *, void __user *, size_t *, loff_t *);
+ void __user *, size_t *, loff_t *);
extern char numa_zonelist_order[];
#define NUMA_ZONELIST_ORDER_LEN 16 /* string buffer size */
*/
#define MODULE_LICENSE(_license) MODULE_INFO(license, _license)
-/* Author, ideally of form NAME[, NAME]*[ and NAME] */
+/*
+ * Author(s), use "Name <email>" or just "Name", for multiple
+ * authors use multiple MODULE_AUTHOR() statements/lines.
+ */
#define MODULE_AUTHOR(_author) MODULE_INFO(author, _author)
/* What your module does. */
#endif
#ifdef CONFIG_KALLSYMS
- /* We keep the symbol and string tables for kallsyms. */
- Elf_Sym *symtab;
- unsigned int num_symtab;
- char *strtab;
+ /*
+ * We keep the symbol and string tables for kallsyms.
+ * The core_* fields below are temporary, loader-only (they
+ * could really be discarded after module init).
+ */
+ Elf_Sym *symtab, *core_symtab;
+ unsigned int num_symtab, core_num_syms;
+ char *strtab, *core_strtab;
/* Section attributes */
struct module_sect_attrs *sect_attrs;
typedef int (*param_get_fn)(char *buffer, struct kernel_param *kp);
/* Flag bits for kernel_param.flags */
-#define KPARAM_KMALLOCED 1
#define KPARAM_ISBOOL 2
struct kernel_param {
#endif
#ifdef CONFIG_IP_MROUTE
-extern int ip_mroute_setsockopt(struct sock *, int, char __user *, int);
+extern int ip_mroute_setsockopt(struct sock *, int, char __user *, unsigned int);
extern int ip_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
extern int ipmr_ioctl(struct sock *sk, int cmd, void __user *arg);
extern int ip_mr_init(void);
#else
static inline
int ip_mroute_setsockopt(struct sock *sock,
- int optname, char __user *optval, int optlen)
+ int optname, char __user *optval, unsigned int optlen)
{
return -ENOPROTOOPT;
}
struct sock;
#ifdef CONFIG_IPV6_MROUTE
-extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, int);
+extern int ip6_mroute_setsockopt(struct sock *, int, char __user *, unsigned int);
extern int ip6_mroute_getsockopt(struct sock *, int, char __user *, int __user *);
extern int ip6_mr_input(struct sk_buff *skb);
extern int ip6mr_ioctl(struct sock *sk, int cmd, void __user *arg);
#else
static inline
int ip6_mroute_setsockopt(struct sock *sock,
- int optname, char __user *optval, int optlen)
+ int optname, char __user *optval, unsigned int optlen)
{
return -ENOPROTOOPT;
}
int (*listen) (struct socket *sock, int len);
int (*shutdown) (struct socket *sock, int flags);
int (*setsockopt)(struct socket *sock, int level,
- int optname, char __user *optval, int optlen);
+ int optname, char __user *optval, unsigned int optlen);
int (*getsockopt)(struct socket *sock, int level,
int optname, char __user *optval, int __user *optlen);
int (*compat_setsockopt)(struct socket *sock, int level,
- int optname, char __user *optval, int optlen);
+ int optname, char __user *optval, unsigned int optlen);
int (*compat_getsockopt)(struct socket *sock, int level,
int optname, char __user *optval, int __user *optlen);
int (*sendmsg) (struct kiocb *iocb, struct socket *sock,
extern int kernel_getsockopt(struct socket *sock, int level, int optname,
char *optval, int *optlen);
extern int kernel_setsockopt(struct socket *sock, int level, int optname,
- char *optval, int optlen);
+ char *optval, unsigned int optlen);
extern int kernel_sendpage(struct socket *sock, struct page *page, int offset,
size_t size, int flags);
extern int kernel_sock_ioctl(struct socket *sock, int cmd, unsigned long arg);
SOCKCALL_WRAP(name, listen, (struct socket *sock, int len), (sock, len)) \
SOCKCALL_WRAP(name, shutdown, (struct socket *sock, int flags), (sock, flags)) \
SOCKCALL_WRAP(name, setsockopt, (struct socket *sock, int level, int optname, \
- char __user *optval, int optlen), (sock, level, optname, optval, optlen)) \
+ char __user *optval, unsigned int optlen), (sock, level, optname, optval, optlen)) \
SOCKCALL_WRAP(name, getsockopt, (struct socket *sock, int level, int optname, \
char __user *optval, int __user *optlen), (sock, level, optname, optval, optlen)) \
SOCKCALL_WRAP(name, sendmsg, (struct kiocb *iocb, struct socket *sock, struct msghdr *m, size_t len), \
* Callback uses when the transmitter has not made any progress
* for dev->watchdog ticks.
*
- * struct net_device_stats* (*get_stats)(struct net_device *dev);
+ * struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
* Called when a user wants to get the network device usage
* statistics. If not defined, the counters in dev->stats will
* be used.
/* Call setsockopt() */
int nf_setsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt,
- int len);
+ unsigned int len);
int nf_getsockopt(struct sock *sk, u_int8_t pf, int optval, char __user *opt,
int *len);
int compat_nf_setsockopt(struct sock *sk, u_int8_t pf, int optval,
- char __user *opt, int len);
+ char __user *opt, unsigned int len);
int compat_nf_getsockopt(struct sock *sk, u_int8_t pf, int optval,
char __user *opt, int *len);
extern void netlink_kernel_release(struct sock *sk);
extern int __netlink_change_ngroups(struct sock *sk, unsigned int groups);
extern int netlink_change_ngroups(struct sock *sk, unsigned int groups);
+extern void __netlink_clear_multicast_users(struct sock *sk, unsigned int group);
extern void netlink_clear_multicast_users(struct sock *sk, unsigned int group);
extern void netlink_ack(struct sk_buff *in_skb, struct nlmsghdr *nlh, int err);
extern int netlink_has_listeners(struct sock *sk, unsigned int group);
#ifdef __KERNEL__
#include <linux/in.h>
-#include <linux/kref.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/rbtree.h>
* PG_buddy is set to indicate that the page is free and in the buddy system
* (see mm/page_alloc.c).
*
+ * PG_hwpoison indicates that a page got corrupted in hardware and contains
+ * data with incorrect ECC bits that triggered a machine check. Accessing is
+ * not safe since it may cause another machine check. Don't touch!
*/
/*
#endif
#ifdef CONFIG_ARCH_USES_PG_UNCACHED
PG_uncached, /* Page has been mapped as uncached */
+#endif
+#ifdef CONFIG_MEMORY_FAILURE
+ PG_hwpoison, /* hardware poisoned page. Don't touch */
#endif
__NR_PAGEFLAGS,
PAGEFLAG_FALSE(Uncached)
#endif
+#ifdef CONFIG_MEMORY_FAILURE
+PAGEFLAG(HWPoison, hwpoison)
+TESTSETFLAG(HWPoison, hwpoison)
+#define __PG_HWPOISON (1UL << PG_hwpoison)
+#else
+PAGEFLAG_FALSE(HWPoison)
+#define __PG_HWPOISON 0
+#endif
+
static inline int PageUptodate(struct page *page)
{
int ret = test_bit(PG_uptodate, &(page)->flags);
1 << PG_private | 1 << PG_private_2 | \
1 << PG_buddy | 1 << PG_writeback | 1 << PG_reserved | \
1 << PG_slab | 1 << PG_swapcache | 1 << PG_active | \
- 1 << PG_unevictable | __PG_MLOCKED)
+ 1 << PG_unevictable | __PG_MLOCKED | __PG_HWPOISON)
/*
* Flags checked when a page is prepped for return by the page allocator.
PCG_LOCK, /* page cgroup is locked */
PCG_CACHE, /* charged as cache */
PCG_USED, /* this object is in use. */
+ PCG_ACCT_LRU, /* page has been accounted for */
};
#define TESTPCGFLAG(uname, lname) \
static inline void ClearPageCgroup##uname(struct page_cgroup *pc) \
{ clear_bit(PCG_##lname, &pc->flags); }
+#define TESTCLEARPCGFLAG(uname, lname) \
+static inline int TestClearPageCgroup##uname(struct page_cgroup *pc) \
+ { return test_and_clear_bit(PCG_##lname, &pc->flags); }
+
/* Cache flag is set only once (at allocation) */
TESTPCGFLAG(Cache, CACHE)
+CLEARPCGFLAG(Cache, CACHE)
+SETPCGFLAG(Cache, CACHE)
TESTPCGFLAG(Used, USED)
CLEARPCGFLAG(Used, USED)
+SETPCGFLAG(Used, USED)
+
+SETPCGFLAG(AcctLRU, ACCT_LRU)
+CLEARPCGFLAG(AcctLRU, ACCT_LRU)
+TESTPCGFLAG(AcctLRU, ACCT_LRU)
+TESTCLEARPCGFLAG(AcctLRU, ACCT_LRU)
static inline int page_cgroup_nid(struct page_cgroup *pc)
{
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c
-/* AMD SB Chipset */
-#define PCI_DEVICE_ID_AMD_SB900_IDE 0x780c
-#define PCI_DEVICE_ID_AMD_SB900_SATA_IDE 0x7800
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_VLSI_82C592 0x0005
#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE 0x0361
#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL 0x252
+#define PCI_SUBVENDOR_ID_IBM 0x1014
+#define PCI_SUBDEVICE_ID_IBM_SATURN_SERIAL_ONE_PORT 0x03d4
+
#define PCI_VENDOR_ID_UNISYS 0x1018
#define PCI_DEVICE_ID_UNISYS_DMA_DIRECTOR 0x001C
#define PCI_DEVICE_ID_AMD_CS5536_UDC 0x2096
#define PCI_DEVICE_ID_AMD_CS5536_UOC 0x2097
#define PCI_DEVICE_ID_AMD_CS5536_IDE 0x209A
-
#define PCI_DEVICE_ID_AMD_LX_VIDEO 0x2081
#define PCI_DEVICE_ID_AMD_LX_AES 0x2082
+#define PCI_DEVICE_ID_AMD_HUDSON2_IDE 0x780c
+#define PCI_DEVICE_ID_AMD_HUDSON2_SATA_IDE 0x7800
#define PCI_VENDOR_ID_TRIDENT 0x1023
#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX 0x2000
#define PCI_DEVICE_ID_TI_X515 0x8036
#define PCI_DEVICE_ID_TI_XX12 0x8039
#define PCI_DEVICE_ID_TI_XX12_FM 0x803b
+#define PCI_DEVICE_ID_TI_XIO2000A 0x8231
#define PCI_DEVICE_ID_TI_1130 0xac12
#define PCI_DEVICE_ID_TI_1031 0xac13
#define PCI_DEVICE_ID_TI_1131 0xac15
#define PCI_DEVICE_ID_ADDIDATA_APCI7420_3 0x700D
#define PCI_DEVICE_ID_ADDIDATA_APCI7300_3 0x700E
#define PCI_DEVICE_ID_ADDIDATA_APCI7800_3 0x700F
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7300 0x7010
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7420 0x7011
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7500 0x7012
+#define PCI_DEVICE_ID_ADDIDATA_APCIe7800 0x7013
#define PCI_VENDOR_ID_PDC 0x15e9
#define PCI_DEVICE_ID_INTEL_E7525_MCH 0x359e
#define PCI_DEVICE_ID_INTEL_IOAT_CNB 0x360b
#define PCI_DEVICE_ID_INTEL_FBD_CNB 0x360c
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF0 0x3710
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF1 0x3711
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF2 0x3712
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF3 0x3713
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF4 0x3714
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF5 0x3715
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF6 0x3716
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF7 0x3717
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF8 0x3718
+#define PCI_DEVICE_ID_INTEL_IOAT_JSF9 0x3719
#define PCI_DEVICE_ID_INTEL_ICH10_0 0x3a14
#define PCI_DEVICE_ID_INTEL_ICH10_1 0x3a16
#define PCI_DEVICE_ID_INTEL_ICH10_2 0x3a18
* struct perf_event_header header;
* u32 pid, ppid;
* u32 tid, ptid;
- * { u64 time; } && PERF_SAMPLE_TIME
+ * u64 time;
* };
*/
PERF_EVENT_FORK = 7,
* struct perf_event_header header;
* u32 pid, ppid;
* u32 tid, ptid;
- * { u64 time; } && PERF_SAMPLE_TIME
+ * u64 time;
* };
*/
PERF_RECORD_FORK = 7,
#include <linux/hrtimer.h>
#include <linux/fs.h>
#include <linux/pid_namespace.h>
+#include <linux/workqueue.h>
#include <asm/atomic.h>
#define PERF_MAX_STACK_DEPTH 255
unsigned long event_base;
int idx;
};
- union { /* software */
- atomic64_t count;
+ struct { /* software */
+ s64 remaining;
struct hrtimer hrtimer;
};
};
struct perf_mmap_data {
struct rcu_head rcu_head;
+#ifdef CONFIG_PERF_USE_VMALLOC
+ struct work_struct work;
+#endif
+ int data_order;
int nr_pages; /* nr of data pages */
int writable; /* are we writable */
int nr_locked; /* nr pages mlocked */
#define PNPIPE_IFINDEX 2
#define PNADDR_ANY 0
+#define PNADDR_BROADCAST 0xFC
#define PNPORT_RESOURCE_ROUTING 0
/* Values for PNPIPE_ENCAP option */
#ifdef __KERNEL__
#include <linux/compiler.h>
+#include <linux/ktime.h>
#include <linux/wait.h>
#include <linux/string.h>
#include <linux/fs.h>
-#include <linux/sched.h>
#include <asm/uaccess.h>
/* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
POWER_SUPPLY_STATUS_FULL,
};
+enum {
+ POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0,
+ POWER_SUPPLY_CHARGE_TYPE_NONE,
+ POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
+ POWER_SUPPLY_CHARGE_TYPE_FAST,
+};
+
enum {
POWER_SUPPLY_HEALTH_UNKNOWN = 0,
POWER_SUPPLY_HEALTH_GOOD,
POWER_SUPPLY_TECHNOLOGY_LiMn,
};
+enum {
+ POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0,
+ POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL,
+ POWER_SUPPLY_CAPACITY_LEVEL_LOW,
+ POWER_SUPPLY_CAPACITY_LEVEL_NORMAL,
+ POWER_SUPPLY_CAPACITY_LEVEL_HIGH,
+ POWER_SUPPLY_CAPACITY_LEVEL_FULL,
+};
+
enum power_supply_property {
/* Properties of type `int' */
POWER_SUPPLY_PROP_STATUS = 0,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_ENERGY_NOW,
POWER_SUPPLY_PROP_ENERGY_AVG,
POWER_SUPPLY_PROP_CAPACITY, /* in percents! */
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
POWER_SUPPLY_PROP_TEMP,
POWER_SUPPLY_PROP_TEMP_AMBIENT,
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
enum power_supply_property psp,
union power_supply_propval *val);
void (*external_power_changed)(struct power_supply *psy);
+ void (*set_charged)(struct power_supply *psy);
/* For APM emulation, think legacy userspace. */
int use_for_apm;
int use_for_apm;
};
+extern struct power_supply *power_supply_get_by_name(char *name);
extern void power_supply_changed(struct power_supply *psy);
extern int power_supply_am_i_supplied(struct power_supply *psy);
+extern int power_supply_set_battery_charged(struct power_supply *psy);
#if defined(CONFIG_POWER_SUPPLY) || defined(CONFIG_POWER_SUPPLY_MODULE)
extern int power_supply_is_system_supplied(void);
#define PR_TASK_PERF_EVENTS_DISABLE 31
#define PR_TASK_PERF_EVENTS_ENABLE 32
+/*
+ * Set early/late kill mode for hwpoison memory corruption.
+ * This influences when the process gets killed on a memory corruption.
+ */
+#define PR_MCE_KILL 33
+# define PR_MCE_KILL_CLEAR 0
+# define PR_MCE_KILL_SET 1
+
+# define PR_MCE_KILL_LATE 0
+# define PR_MCE_KILL_EARLY 1
+# define PR_MCE_KILL_DEFAULT 2
+
+#define PR_MCE_KILL_GET 34
+
#endif /* _LINUX_PRCTL_H */
#endif
extern const struct file_operations ramfs_file_operations;
-extern struct vm_operations_struct generic_file_vm_ops;
+extern const struct vm_operations_struct generic_file_vm_ops;
extern int __init init_rootfs(void);
#endif
#error "Unknown RCU implementation specified to kernel configuration"
#endif
-#define RCU_HEAD_INIT { .next = NULL, .func = NULL }
+#define RCU_HEAD_INIT { .next = NULL, .func = NULL }
#define RCU_HEAD(head) struct rcu_head head = RCU_HEAD_INIT
#define INIT_RCU_HEAD(ptr) do { \
(ptr)->next = NULL; (ptr)->func = NULL; \
rcu_read_acquire();
}
-/**
- * rcu_read_unlock - marks the end of an RCU read-side critical section.
- *
- * See rcu_read_lock() for more information.
- */
-
/*
* So where is rcu_write_lock()? It does not exist, as there is no
* way for writers to lock out RCU readers. This is a feature, not
* used as well. RCU does not care how the writers keep out of each
* others' way, as long as they do so.
*/
+
+/**
+ * rcu_read_unlock - marks the end of an RCU read-side critical section.
+ *
+ * See rcu_read_lock() for more information.
+ */
static inline void rcu_read_unlock(void)
{
rcu_read_release();
__acquire(RCU_SCHED);
rcu_read_acquire();
}
+
+/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
static inline notrace void rcu_read_lock_sched_notrace(void)
{
preempt_disable_notrace();
__release(RCU_SCHED);
preempt_enable();
}
+
+/* Used by lockdep and tracing: cannot be traced, cannot call lockdep. */
static inline notrace void rcu_read_unlock_sched_notrace(void)
{
__release(RCU_SCHED);
#ifndef __LINUX_RCUTREE_H
#define __LINUX_RCUTREE_H
+struct notifier_block;
+
extern void rcu_sched_qs(int cpu);
extern void rcu_bh_qs(int cpu);
-
+extern int rcu_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu);
extern int rcu_needs_cpu(int cpu);
+extern int rcu_expedited_torture_stats(char *page);
#ifdef CONFIG_TREE_PREEMPT_RCU
extern void call_rcu_sched(struct rcu_head *head,
void (*func)(struct rcu_head *rcu));
-
-static inline void synchronize_rcu_expedited(void)
-{
- synchronize_sched_expedited();
-}
+extern void synchronize_rcu_expedited(void);
static inline void synchronize_rcu_bh_expedited(void)
{
extern void __rcu_init(void);
extern void rcu_check_callbacks(int cpu, int user);
-extern void rcu_restart_cpu(int cpu);
extern long rcu_batches_completed(void);
extern long rcu_batches_completed_bh(void);
extern long rcu_batches_completed_sched(void);
-static inline void rcu_init_sched(void)
-{
-}
-
#ifdef CONFIG_NO_HZ
void rcu_enter_nohz(void);
void rcu_exit_nohz(void);
}
#endif /* CONFIG_NO_HZ */
-/* A context switch is a grace period for rcutree. */
+/* A context switch is a grace period for RCU-sched and RCU-bh. */
static inline int rcu_blocking_is_gp(void)
{
return num_online_cpus() == 1;
* cause relay_open() to create a single global buffer rather
* than the default set of per-cpu buffers.
*
- * See Documentation/filesystems/relayfs.txt for more info.
+ * See Documentation/filesystems/relay.txt for more info.
*/
struct dentry *(*create_buf_file)(const char *filename,
struct dentry *parent,
* the limit that usage cannot exceed
*/
unsigned long long limit;
+ /*
+ * the limit that usage can be exceed
+ */
+ unsigned long long soft_limit;
/*
* the number of unsuccessful attempts to consume the resource
*/
RES_MAX_USAGE,
RES_LIMIT,
RES_FAILCNT,
+ RES_SOFT_LIMIT,
};
/*
return false;
}
+static inline bool res_counter_soft_limit_check_locked(struct res_counter *cnt)
+{
+ if (cnt->usage < cnt->soft_limit)
+ return true;
+
+ return false;
+}
+
+/**
+ * Get the difference between the usage and the soft limit
+ * @cnt: The counter
+ *
+ * Returns 0 if usage is less than or equal to soft limit
+ * The difference between usage and soft limit, otherwise.
+ */
+static inline unsigned long long
+res_counter_soft_limit_excess(struct res_counter *cnt)
+{
+ unsigned long long excess;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cnt->lock, flags);
+ if (cnt->usage <= cnt->soft_limit)
+ excess = 0;
+ else
+ excess = cnt->usage - cnt->soft_limit;
+ spin_unlock_irqrestore(&cnt->lock, flags);
+ return excess;
+}
+
/*
* Helper function to detect if the cgroup is within it's limit or
* not. It's currently called from cgroup_rss_prepare()
return ret;
}
+static inline bool res_counter_check_under_soft_limit(struct res_counter *cnt)
+{
+ bool ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(&cnt->lock, flags);
+ ret = res_counter_soft_limit_check_locked(cnt);
+ spin_unlock_irqrestore(&cnt->lock, flags);
+ return ret;
+}
+
static inline void res_counter_reset_max(struct res_counter *cnt)
{
unsigned long flags;
return ret;
}
+static inline int
+res_counter_set_soft_limit(struct res_counter *cnt,
+ unsigned long long soft_limit)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&cnt->lock, flags);
+ cnt->soft_limit = soft_limit;
+ spin_unlock_irqrestore(&cnt->lock, flags);
+ return 0;
+}
+
#endif
*/
int page_referenced(struct page *, int is_locked,
struct mem_cgroup *cnt, unsigned long *vm_flags);
-int try_to_unmap(struct page *, int ignore_refs);
+enum ttu_flags {
+ TTU_UNMAP = 0, /* unmap mode */
+ TTU_MIGRATION = 1, /* migration mode */
+ TTU_MUNLOCK = 2, /* munlock mode */
+ TTU_ACTION_MASK = 0xff,
+
+ TTU_IGNORE_MLOCK = (1 << 8), /* ignore mlock */
+ TTU_IGNORE_ACCESS = (1 << 9), /* don't age */
+ TTU_IGNORE_HWPOISON = (1 << 10),/* corrupted page is recoverable */
+};
+#define TTU_ACTION(x) ((x) & TTU_ACTION_MASK)
+
+int try_to_unmap(struct page *, enum ttu_flags flags);
/*
* Called from mm/filemap_xip.c to unmap empty zero page
*/
int try_to_munlock(struct page *);
+/*
+ * Called by memory-failure.c to kill processes.
+ */
+struct anon_vma *page_lock_anon_vma(struct page *page);
+void page_unlock_anon_vma(struct anon_vma *anon_vma);
+int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma);
+
#else /* !CONFIG_MMU */
#define anon_vma_init() do {} while (0)
extern void touch_softlockup_watchdog(void);
extern void touch_all_softlockup_watchdogs(void);
extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos);
extern unsigned int softlockup_panic;
extern int softlockup_thresh;
extern unsigned long sysctl_hung_task_timeout_secs;
extern unsigned long sysctl_hung_task_warnings;
extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos);
#endif
struct mm_struct *mm, *active_mm;
/* task state */
- struct linux_binfmt *binfmt;
int exit_state;
int exit_code, exit_signal;
int pdeath_signal; /* The signal sent when the parent dies */
#define PF_EXITPIDONE 0x00000008 /* pi exit done on shut down */
#define PF_VCPU 0x00000010 /* I'm a virtual CPU */
#define PF_FORKNOEXEC 0x00000040 /* forked but didn't exec */
+#define PF_MCE_PROCESS 0x00000080 /* process policy on mce errors */
#define PF_SUPERPRIV 0x00000100 /* used super-user privileges */
#define PF_DUMPCORE 0x00000200 /* dumped core */
#define PF_SIGNALED 0x00000400 /* killed by a signal */
#define PF_SPREAD_PAGE 0x01000000 /* Spread page cache over cpuset */
#define PF_SPREAD_SLAB 0x02000000 /* Spread some slab caches over cpuset */
#define PF_THREAD_BOUND 0x04000000 /* Thread bound to specific cpu */
+#define PF_MCE_EARLY 0x08000000 /* Early kill for mce process policy */
#define PF_MEMPOLICY 0x10000000 /* Non-default NUMA mempolicy */
#define PF_MUTEX_TESTER 0x20000000 /* Thread belongs to the rt mutex tester */
#define PF_FREEZER_SKIP 0x40000000 /* Freezer should not count it as freezeable */
return 0;
}
#endif
+
+#ifndef CONFIG_CPUMASK_OFFSTACK
static inline int set_cpus_allowed(struct task_struct *p, cpumask_t new_mask)
{
return set_cpus_allowed_ptr(p, &new_mask);
}
+#endif
/*
* Architectures can set this to 1 if they have specified
extern unsigned int sysctl_timer_migration;
int sched_nr_latency_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length,
+ void __user *buffer, size_t *length,
loff_t *ppos);
#endif
#ifdef CONFIG_SCHED_DEBUG
extern int sysctl_sched_rt_runtime;
int sched_rt_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
extern unsigned int sysctl_sched_compat_yield;
extern int kill_pid(struct pid *pid, int sig, int priv);
extern int kill_proc_info(int, struct siginfo *, pid_t);
extern int do_notify_parent(struct task_struct *, int);
+extern void __wake_up_parent(struct task_struct *p, struct task_struct *parent);
extern void force_sig(int, struct task_struct *);
extern void force_sig_specific(int, struct task_struct *);
extern int send_sig(int, struct task_struct *, int);
return unlikely(test_tsk_thread_flag(p,TIF_SIGPENDING));
}
-extern int __fatal_signal_pending(struct task_struct *p);
+static inline int __fatal_signal_pending(struct task_struct *p)
+{
+ return unlikely(sigismember(&p->pending.signal, SIGKILL));
+}
static inline int fatal_signal_pending(struct task_struct *p)
{
return PAGE_ALIGN(mmap_min_addr);
return hint;
}
-extern int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+extern int mmap_min_addr_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
#ifdef CONFIG_SECURITY
#define SEQ_SKIP 1
+/**
+ * seq_get_buf - get buffer to write arbitrary data to
+ * @m: the seq_file handle
+ * @bufp: the beginning of the buffer is stored here
+ *
+ * Return the number of bytes available in the buffer, or zero if
+ * there's no space.
+ */
+static inline size_t seq_get_buf(struct seq_file *m, char **bufp)
+{
+ BUG_ON(m->count > m->size);
+ if (m->count < m->size)
+ *bufp = m->buf + m->count;
+ else
+ *bufp = NULL;
+
+ return m->size - m->count;
+}
+
+/**
+ * seq_commit - commit data to the buffer
+ * @m: the seq_file handle
+ * @num: the number of bytes to commit
+ *
+ * Commit @num bytes of data written to a buffer previously acquired
+ * by seq_buf_get. To signal an error condition, or that the data
+ * didn't fit in the available space, pass a negative @num value.
+ */
+static inline void seq_commit(struct seq_file *m, int num)
+{
+ if (num < 0) {
+ m->count = m->size;
+ } else {
+ BUG_ON(m->count + num > m->size);
+ m->count += num;
+ }
+}
+
char *mangle_path(char *s, char *p, char *esc);
int seq_open(struct file *, const struct seq_operations *);
ssize_t seq_read(struct file *, char __user *, size_t, loff_t *);
/* Qualcomm MSM SoCs */
#define PORT_MSM 88
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX 89
+
#ifdef __KERNEL__
#include <linux/compiler.h>
/**
* uart_handle_dcd_change - handle a change of carrier detect state
- * @port: uart_port structure for the open port
+ * @uport: uart_port structure for the open port
* @status: new carrier detect status, nonzero if active
*/
static inline void
/**
* uart_handle_cts_change - handle a change of clear-to-send state
- * @port: uart_port structure for the open port
+ * @uport: uart_port structure for the open port
* @status: new clear to send status, nonzero if active
*/
static inline void
}
extern int next_signal(struct sigpending *pending, sigset_t *mask);
+extern int do_send_sig_info(int sig, struct siginfo *info,
+ struct task_struct *p, bool group);
extern int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p);
extern int __group_send_sig_info(int, struct siginfo *, struct task_struct *);
extern long do_rt_tgsigqueueinfo(pid_t tgid, pid_t pid, int sig,
ipvs_property:1,
peeked:1,
nf_trace:1;
+ __be16 protocol:16;
kmemcheck_bitfield_end(flags1);
- __be16 protocol;
void (*destructor)(struct sk_buff *skb);
#if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
#endif
int iif;
- __u16 queue_mapping;
#ifdef CONFIG_NET_SCHED
__u16 tc_index; /* traffic control index */
#ifdef CONFIG_NET_CLS_ACT
#endif
kmemcheck_bitfield_begin(flags2);
+ __u16 queue_mapping:16;
#ifdef CONFIG_IPV6_NDISC_NODETYPE
__u8 ndisc_nodetype:2;
#endif
int to_offset,
int size);
extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb);
+extern void skb_free_datagram_locked(struct sock *sk,
+ struct sk_buff *skb);
extern int skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
unsigned int flags);
extern __wsum skb_checksum(const struct sk_buff *skb, int offset,
void smp_call_function_many(const struct cpumask *mask,
void (*func)(void *info), void *info, bool wait);
-/* Deprecated: Use smp_call_function_many which takes a pointer to the mask. */
-static inline int
-smp_call_function_mask(cpumask_t mask, void(*func)(void *info), void *info,
- int wait)
-{
- smp_call_function_many(&mask, func, info, wait);
- return 0;
-}
-
void __smp_call_function_single(int cpuid, struct call_single_data *data,
int wait);
static inline void smp_send_reschedule(int cpu) { }
#define num_booting_cpus() 1
#define smp_prepare_boot_cpu() do {} while (0)
-#define smp_call_function_mask(mask, func, info, wait) \
- (up_smp_call_function(func, info))
#define smp_call_function_many(mask, func, info, wait) \
(up_smp_call_function(func, info))
static inline void init_call_single_data(void)
/* _SS_MAXSIZE value minus size of ss_family */
} __attribute__ ((aligned(_K_SS_ALIGNSIZE))); /* force desired alignment */
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+#ifdef __KERNEL__
#include <asm/socket.h> /* arch-dependent defines */
#include <linux/sockios.h> /* the SIOCxxx I/O controls */
((mhdr)->msg_controllen - \
((char *)(cmsg) - (char *)(mhdr)->msg_control)))
-/*
- * This mess will go away with glibc
- */
-
-#ifdef __KERNEL__
-#define __KINLINE static inline
-#elif defined(__GNUC__)
-#define __KINLINE static __inline__
-#elif defined(__cplusplus)
-#define __KINLINE static inline
-#else
-#define __KINLINE static
-#endif
-
-
/*
* Get the next cmsg header
*
* ancillary object DATA. --ANK (980731)
*/
-__KINLINE struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
+static inline struct cmsghdr * __cmsg_nxthdr(void *__ctl, __kernel_size_t __size,
struct cmsghdr *__cmsg)
{
struct cmsghdr * __ptr;
return __ptr;
}
-__KINLINE struct cmsghdr * cmsg_nxthdr (struct msghdr *__msg, struct cmsghdr *__cmsg)
+static inline struct cmsghdr * cmsg_nxthdr (struct msghdr *__msg, struct cmsghdr *__cmsg)
{
return __cmsg_nxthdr(__msg->msg_control, __msg->msg_controllen, __cmsg);
}
--- /dev/null
+/*
+ * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD
+ *
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_
+#define _INCLUDE_LINUX_SPI_LMS283GF05_H_
+
+struct lms283gf05_pdata {
+ unsigned long reset_gpio;
+ bool reset_inverted;
+};
+
+#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */
#ifndef __HAVE_ARCH_STRRCHR
extern char * strrchr(const char *,int);
#endif
-extern char * strstrip(char *);
+extern char * __must_check strstrip(char *);
#ifndef __HAVE_ARCH_STRSTR
extern char * strstr(const char *,const char *);
#endif
#include <linux/uio.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <linux/scatterlist.h>
/*
static inline __be32 *
xdr_encode_hyper(__be32 *p, __u64 val)
{
- *(__be64 *)p = cpu_to_be64(val);
+ put_unaligned_be64(val, p);
return p + 2;
}
static inline __be32 *
xdr_decode_hyper(__be32 *p, __u64 *valp)
{
- *valp = be64_to_cpup((__be64 *)p);
+ *valp = get_unaligned_be64(p);
return p + 2;
}
* the type/offset into the pte as 5/27 as well.
*/
#define MAX_SWAPFILES_SHIFT 5
-#ifndef CONFIG_MIGRATION
-#define MAX_SWAPFILES (1 << MAX_SWAPFILES_SHIFT)
+
+/*
+ * Use some of the swap files numbers for other purposes. This
+ * is a convenient way to hook into the VM to trigger special
+ * actions on faults.
+ */
+
+/*
+ * NUMA node memory migration support
+ */
+#ifdef CONFIG_MIGRATION
+#define SWP_MIGRATION_NUM 2
+#define SWP_MIGRATION_READ (MAX_SWAPFILES + SWP_HWPOISON_NUM)
+#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + SWP_HWPOISON_NUM + 1)
#else
-/* Use last two entries for page migration swap entries */
-#define MAX_SWAPFILES ((1 << MAX_SWAPFILES_SHIFT)-2)
-#define SWP_MIGRATION_READ MAX_SWAPFILES
-#define SWP_MIGRATION_WRITE (MAX_SWAPFILES + 1)
+#define SWP_MIGRATION_NUM 0
#endif
+/*
+ * Handling of hardware poisoned pages with memory corruption.
+ */
+#ifdef CONFIG_MEMORY_FAILURE
+#define SWP_HWPOISON_NUM 1
+#define SWP_HWPOISON MAX_SWAPFILES
+#else
+#define SWP_HWPOISON_NUM 0
+#endif
+
+#define MAX_SWAPFILES \
+ ((1 << MAX_SWAPFILES_SHIFT) - SWP_MIGRATION_NUM - SWP_HWPOISON_NUM)
+
/*
* Magic header for a swap area. The first part of the union is
* what the swap magic looks like for the old (limited to 128MB)
extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
gfp_t gfp_mask, bool noswap,
unsigned int swappiness);
+extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
+ gfp_t gfp_mask, bool noswap,
+ unsigned int swappiness,
+ struct zone *zone,
+ int nid);
extern int __isolate_lru_page(struct page *page, int mode, int file);
extern unsigned long shrink_all_memory(unsigned long nr_pages);
extern int vm_swappiness;
extern void scan_mapping_unevictable_pages(struct address_space *);
extern unsigned long scan_unevictable_pages;
-extern int scan_unevictable_handler(struct ctl_table *, int, struct file *,
+extern int scan_unevictable_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
extern int scan_unevictable_register_node(struct node *node);
extern void scan_unevictable_unregister_node(struct node *node);
#endif
+#ifdef CONFIG_MEMORY_FAILURE
+/*
+ * Support for hardware poisoned pages
+ */
+static inline swp_entry_t make_hwpoison_entry(struct page *page)
+{
+ BUG_ON(!PageLocked(page));
+ return swp_entry(SWP_HWPOISON, page_to_pfn(page));
+}
+
+static inline int is_hwpoison_entry(swp_entry_t entry)
+{
+ return swp_type(entry) == SWP_HWPOISON;
+}
+#else
+
+static inline swp_entry_t make_hwpoison_entry(struct page *page)
+{
+ return swp_entry(0, 0);
+}
+
+static inline int is_hwpoison_entry(swp_entry_t swp)
+{
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_MEMORY_FAILURE) || defined(CONFIG_MIGRATION)
+static inline int non_swap_entry(swp_entry_t entry)
+{
+ return swp_type(entry) >= MAX_SWAPFILES;
+}
+#else
+static inline int non_swap_entry(swp_entry_t entry)
+{
+ return 0;
+}
+#endif
#include <linux/types.h>
#include <linux/compiler.h>
-struct file;
struct completion;
#define CTL_MAXNAME 10 /* how many path components do we allow in a
void __user *oldval, size_t __user *oldlenp,
void __user *newval, size_t newlen);
-typedef int proc_handler (struct ctl_table *ctl, int write, struct file * filp,
+typedef int proc_handler (struct ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
-extern int proc_dostring(struct ctl_table *, int, struct file *,
+extern int proc_dostring(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec(struct ctl_table *, int, struct file *,
+extern int proc_dointvec(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec_minmax(struct ctl_table *, int, struct file *,
+extern int proc_dointvec_minmax(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec_jiffies(struct ctl_table *, int, struct file *,
+extern int proc_dointvec_jiffies(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int, struct file *,
+extern int proc_dointvec_userhz_jiffies(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_dointvec_ms_jiffies(struct ctl_table *, int, struct file *,
+extern int proc_dointvec_ms_jiffies(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-extern int proc_doulongvec_minmax(struct ctl_table *, int, struct file *,
+extern int proc_doulongvec_minmax(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
extern int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int,
- struct file *, void __user *, size_t *, loff_t *);
+ void __user *, size_t *, loff_t *);
extern int do_sysctl (int __user *name, int nlen,
void __user *oldval, size_t __user *oldlenp,
struct tms;
extern void do_sys_times(struct tms *);
+/*
+ * Similar to the struct tm in userspace <time.h>, but it needs to be here so
+ * that the kernel source is self contained.
+ */
+struct tm {
+ /*
+ * the number of seconds after the minute, normally in the range
+ * 0 to 59, but can be up to 60 to allow for leap seconds
+ */
+ int tm_sec;
+ /* the number of minutes after the hour, in the range 0 to 59*/
+ int tm_min;
+ /* the number of hours past midnight, in the range 0 to 23 */
+ int tm_hour;
+ /* the day of the month, in the range 1 to 31 */
+ int tm_mday;
+ /* the number of months since January, in the range 0 to 11 */
+ int tm_mon;
+ /* the number of years since 1900 */
+ long tm_year;
+ /* the number of days since Sunday, in the range 0 to 6 */
+ int tm_wday;
+ /* the number of days since January 1, in the range 0 to 365 */
+ int tm_yday;
+};
+
+void time_to_tm(time_t totalsecs, int offset, struct tm *result);
+
/**
* timespec_to_ns - Convert timespec to nanoseconds
* @ts: pointer to the timespec variable to be converted
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
- | 1*SD_PREFER_LOCAL \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 1*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
| 1*SD_BALANCE_FORK \
| 0*SD_BALANCE_WAKE \
| 1*SD_WAKE_AFFINE \
- | 1*SD_PREFER_LOCAL \
+ | 0*SD_PREFER_LOCAL \
| 0*SD_SHARE_CPUPOWER \
| 0*SD_SHARE_PKG_RESOURCES \
| 0*SD_SERIALIZE \
#ifndef topology_core_id
#define topology_core_id(cpu) ((void)(cpu), 0)
#endif
-#ifndef topology_thread_siblings
-#define topology_thread_siblings(cpu) cpumask_of_cpu(cpu)
-#endif
-#ifndef topology_core_siblings
-#define topology_core_siblings(cpu) cpumask_of_cpu(cpu)
-#endif
#ifndef topology_thread_cpumask
#define topology_thread_cpumask(cpu) cpumask_of(cpu)
#endif
/*
* Trace sequences are used to allow a function to call several other functions
- * to create a string of data to use (up to a max of PAGE_SIZE.
+ * to create a string of data to use (up to a max of PAGE_SIZE).
*/
struct trace_seq {
/*
* Tracing hooks
*
- * Copyright (C) 2008 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2008-2009 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
/**
* tracehook_notify_jctl - report about job control stop/continue
- * @notify: nonzero if this is the last thread in the group to stop
+ * @notify: zero, %CLD_STOPPED or %CLD_CONTINUED
* @why: %CLD_STOPPED or %CLD_CONTINUED
*
* This is called when we might call do_notify_parent_cldstop().
- * It's called when about to stop for job control; we are already in
- * %TASK_STOPPED state, about to call schedule(). It's also called when
- * a delayed %CLD_STOPPED or %CLD_CONTINUED report is ready to be made.
*
- * Return nonzero to generate a %SIGCHLD with @why, which is
- * normal if @notify is nonzero.
+ * @notify is zero if we would not ordinarily send a %SIGCHLD,
+ * or is the %CLD_STOPPED or %CLD_CONTINUED .si_code for %SIGCHLD.
*
- * Called with no locks held.
+ * @why is %CLD_STOPPED when about to stop for job control;
+ * we are already in %TASK_STOPPED state, about to call schedule().
+ * It might also be that we have just exited (check %PF_EXITING),
+ * but need to report that a group-wide stop is complete.
+ *
+ * @why is %CLD_CONTINUED when waking up after job control stop and
+ * ready to make a delayed @notify report.
+ *
+ * Return the %CLD_* value for %SIGCHLD, or zero to generate no signal.
+ *
+ * Called with the siglock held.
*/
static inline int tracehook_notify_jctl(int notify, int why)
{
- return notify || (current->ptrace & PT_PTRACED);
+ return notify ?: (current->ptrace & PT_PTRACED) ? why : 0;
+}
+
+/**
+ * tracehook_finish_jctl - report about return from job control stop
+ *
+ * This is called by do_signal_stop() after wakeup.
+ */
+static inline void tracehook_finish_jctl(void)
+{
}
#define DEATH_REAP -1
/*
* Kernel Tracepoint API.
*
- * See Documentation/tracepoint.txt.
+ * See Documentation/trace/tracepoints.txt.
*
* (C) Copyright 2008 Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
*
#ifndef DECLARE_TRACE
#define TP_PROTO(args...) args
-#define TP_ARGS(args...) args
+#define TP_ARGS(args...) args
#ifdef CONFIG_TRACEPOINTS
*
* void (*shutdown)(struct tty_struct * tty);
*
- * This routine is called when a particular tty device is closed for
- * the last time freeing up the resources.
+ * This routine is called synchronously when a particular tty device
+ * is closed for the last time freeing up the resources.
+ *
+ *
+ * void (*cleanup)(struct tty_struct * tty);
+ *
+ * This routine is called asynchronously when a particular tty device
+ * is closed for the last time freeing up the resources. This is
+ * actually the second part of shutdown for routines that might sleep.
+ *
*
* int (*write)(struct tty_struct * tty,
* const unsigned char *buf, int count);
int (*open)(struct tty_struct * tty, struct file * filp);
void (*close)(struct tty_struct * tty, struct file * filp);
void (*shutdown)(struct tty_struct *tty);
+ void (*cleanup)(struct tty_struct *tty);
int (*write)(struct tty_struct * tty,
const unsigned char *buf, int count);
int (*put_char)(struct tty_struct *tty, unsigned char ch);
#ifndef _LINUX_UNALIGNED_BE_BYTESHIFT_H
#define _LINUX_UNALIGNED_BE_BYTESHIFT_H
-#include <linux/kernel.h>
+#include <linux/types.h>
static inline u16 __get_unaligned_be16(const u8 *p)
{
#ifndef _LINUX_UNALIGNED_LE_BYTESHIFT_H
#define _LINUX_UNALIGNED_LE_BYTESHIFT_H
-#include <linux/kernel.h>
+#include <linux/types.h>
static inline u16 __get_unaligned_le16(const u8 *p)
{
struct usb_interface *interface;
unsigned char disconnected:1;
unsigned char suspending:1;
+ unsigned char attached:1;
unsigned char minor;
unsigned char num_ports;
unsigned char num_port_pointers;
#define FLAG_FRAMING_AX 0x0040 /* AX88772/178 packets */
#define FLAG_WLAN 0x0080 /* use "wlan%d" names */
#define FLAG_AVOID_UNLINK_URBS 0x0100 /* don't unlink urbs at usbnet_stop() */
+#define FLAG_SEND_ZLP 0x0200 /* hw requires ZLPs are sent */
/* init device ... can sleep, or cause probe() failure */
#include <linux/kref.h>
#include <linux/nsproxy.h>
#include <linux/err.h>
-#include <asm/atomic.h>
struct uts_namespace {
struct kref kref;
/*
- * vgaarb.c
+ * The VGA aribiter manages VGA space routing and VGA resource decode to
+ * allow multiple VGA devices to be used in a system in a safe way.
*
* (C) Copyright 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
* (C) Copyright 2007 Paulo R. Zanoni <przanoni@gmail.com>
#define _LINUX_VIRTIO_9P_H
/* This header is BSD licensed so anyone can use the definitions to implement
* compatible drivers/servers. */
+#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
/* Maximum number of virtio channels per partition (1 for now) */
#define _LINUX_VIRTIO_BALLOON_H
/* This header is BSD licensed so anyone can use the definitions to implement
* compatible drivers/servers. */
+#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
/* The feature bitmap for virtio balloon */
/* This header is BSD licensed so anyone can use the definitions to implement
* compatible drivers/servers. */
#include <linux/types.h>
+#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
/* Feature bits */
#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
#define VIRTIO_BLK_F_BLK_SIZE 6 /* Block size of disk is available*/
#define VIRTIO_BLK_F_SCSI 7 /* Supports scsi command passthru */
-#define VIRTIO_BLK_F_IDENTIFY 8 /* ATA IDENTIFY supported */
#define VIRTIO_BLK_F_FLUSH 9 /* Cache flush command support */
-#define VIRTIO_BLK_ID_BYTES (sizeof(__u16[256])) /* IDENTIFY DATA */
-
struct virtio_blk_config {
/* The capacity (in 512-byte sectors). */
__u64 capacity;
} geometry;
/* block size of device (if VIRTIO_BLK_F_BLK_SIZE) */
__u32 blk_size;
- __u8 identify[VIRTIO_BLK_ID_BYTES];
} __attribute__((packed));
/*
#ifndef _LINUX_VIRTIO_CONSOLE_H
#define _LINUX_VIRTIO_CONSOLE_H
#include <linux/types.h>
+#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
/* This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
* anyone can use the definitions to implement compatible drivers/servers. */
/* This header is BSD licensed so anyone can use the definitions to implement
* compatible drivers/servers. */
#include <linux/types.h>
+#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
#include <linux/if_ether.h>
#define _LINUX_VIRTIO_RNG_H
/* This header is BSD licensed so anyone can use the definitions to implement
* compatible drivers/servers. */
+#include <linux/virtio_ids.h>
#include <linux/virtio_config.h>
#endif /* _LINUX_VIRTIO_RNG_H */
u16 suspend_mode; /* PRP in suspend mode */
};
+struct wm97xx_batt_pdata {
+ int batt_aux;
+ int temp_aux;
+ int charge_gpio;
+ int min_voltage;
+ int max_voltage;
+ int batt_div;
+ int batt_mult;
+ int temp_div;
+ int temp_mult;
+ int batt_tech;
+ char *batt_name;
+};
+
+struct wm97xx_pdata {
+ struct wm97xx_batt_pdata *batt_pdata; /* battery data */
+};
+
/*
* Codec GPIO access (not supported on WM9705)
* This can be used to set/get codec GPIO and Virtual GPIO status.
#include <linux/wm97xx.h>
-struct wm97xx_batt_info {
- int batt_aux;
- int temp_aux;
- int charge_gpio;
- int min_voltage;
- int max_voltage;
- int batt_div;
- int batt_mult;
- int temp_div;
- int temp_mult;
- int batt_tech;
- char *batt_name;
-};
+#warning This file will be removed soon, use wm97xx.h instead!
+
+#define wm97xx_batt_info wm97xx_batt_pdata
#ifdef CONFIG_BATTERY_WM97XX
-void __init wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
+void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data);
#else
static inline void wm97xx_bat_set_pdata(struct wm97xx_batt_info *data) {}
#endif
extern void flush_workqueue(struct workqueue_struct *wq);
extern void flush_scheduled_work(void);
+extern void flush_delayed_work(struct delayed_work *work);
extern int schedule_work(struct work_struct *work);
extern int schedule_work_on(int cpu, struct work_struct *work);
extern unsigned long determine_dirtyable_memory(void);
extern int dirty_background_ratio_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
extern int dirty_background_bytes_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
extern int dirty_ratio_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
extern int dirty_bytes_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos);
struct ctl_table;
-struct file;
-int dirty_writeback_centisecs_handler(struct ctl_table *, int, struct file *,
+int dirty_writeback_centisecs_handler(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
void get_dirty_limits(unsigned long *pbackground, unsigned long *pdirty,
* @P9_DEBUG_SLABS: memory management tracing
* @P9_DEBUG_FCALL: verbose dump of protocol messages
* @P9_DEBUG_FID: fid allocation/deallocation tracking
+ * @P9_DEBUG_PKT: packet marshalling/unmarshalling
+ * @P9_DEBUG_FSC: FS-cache tracing
*
* These flags are passed at mount time to turn on various levels of
* verbosity and tracing which will be output to the system logs.
P9_DEBUG_FCALL = (1<<8),
P9_DEBUG_FID = (1<<9),
P9_DEBUG_PKT = (1<<10),
+ P9_DEBUG_FSC = (1<<11),
};
#ifdef CONFIG_NET_9P_DEBUG
* @qid: the &p9_qid server identifier this handle points to
* @iounit: the server reported maximum transaction size for this file
* @uid: the numeric uid of the local user who owns this handle
- * @aux: transport specific information (unused?)
- * @rdir_fpos: tracks offset of file position when reading directory contents
+ * @rdir: readdir accounting structure (allocated on demand)
* @flist: per-client-instance fid tracking
* @dlist: per-dentry fid tracking
*
struct p9_qid qid;
u32 iounit;
uid_t uid;
- void *aux;
- int rdir_fpos;
+ void *rdir;
+
struct list_head flist;
struct list_head dlist; /* list of all fids attached to a dentry */
};
extern int cmsghdr_from_user_compat_to_kern(struct msghdr *, struct sock *, unsigned char *, int);
-extern int compat_mc_setsockopt(struct sock *, int, int, char __user *, int,
- int (*)(struct sock *, int, int, char __user *, int));
+extern int compat_mc_setsockopt(struct sock *, int, int, char __user *, unsigned int,
+ int (*)(struct sock *, int, int, char __user *, unsigned int));
extern int compat_mc_getsockopt(struct sock *, int, int, char __user *,
int __user *, int (*)(struct sock *, int, int, char __user *,
int __user *));
u16 net_header_len;
u16 sockaddr_len;
int (*setsockopt)(struct sock *sk, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
int (*getsockopt)(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
#ifdef CONFIG_COMPAT
int (*compat_setsockopt)(struct sock *sk,
int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
int (*compat_getsockopt)(struct sock *sk,
int level, int optname,
char __user *optval, int __user *optlen);
extern int inet_csk_compat_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
extern int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
#endif /* _INET_CONNECTION_SOCK_H */
__u16 tw_num;
kmemcheck_bitfield_begin(flags);
/* And these are ours. */
- __u8 tw_ipv6only:1,
- tw_transparent:1;
- /* 14 bits hole, try to pack */
+ unsigned int tw_ipv6only : 1,
+ tw_transparent : 1,
+ tw_pad : 14, /* 14 bits hole */
+ tw_ipv6_offset : 16;
kmemcheck_bitfield_end(flags);
- __u16 tw_ipv6_offset;
unsigned long tw_ttd;
struct inet_bind_bucket *tw_tb;
struct hlist_node tw_death_node;
extern void ip_cmsg_recv(struct msghdr *msg, struct sk_buff *skb);
extern int ip_cmsg_send(struct net *net,
struct msghdr *msg, struct ipcm_cookie *ipc);
-extern int ip_setsockopt(struct sock *sk, int level, int optname, char __user *optval, int optlen);
+extern int ip_setsockopt(struct sock *sk, int level, int optname, char __user *optval, unsigned int optlen);
extern int ip_getsockopt(struct sock *sk, int level, int optname, char __user *optval, int __user *optlen);
extern int compat_ip_setsockopt(struct sock *sk, int level,
- int optname, char __user *optval, int optlen);
+ int optname, char __user *optval, unsigned int optlen);
extern int compat_ip_getsockopt(struct sock *sk, int level,
int optname, char __user *optval, int __user *optlen);
extern int ip_ra_control(struct sock *sk, unsigned char on, void (*destructor)(struct sock *));
* fed into the routing cache should use these handlers.
*/
int ipv4_doint_and_flush(ctl_table *ctl, int write,
- struct file* filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos);
int ipv4_doint_and_flush_strategy(ctl_table *table,
void __user *oldval, size_t __user *oldlenp,
extern const struct nla_policy rtm_ipv4_policy[];
extern void ip_fib_init(void);
extern int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
- struct net_device *dev, __be32 *spec_dst, u32 *itag);
+ struct net_device *dev, __be32 *spec_dst,
+ u32 *itag, u32 mark);
extern void fib_select_default(struct net *net, const struct flowi *flp,
struct fib_result *res);
struct ip_tunnel *next;
struct net_device *dev;
- int recursion; /* Depth of hard_start_xmit recursion */
int err_count; /* Number of arrived ICMP errors */
unsigned long err_time; /* Time when the last ICMP error arrived */
unsigned int prl_count; /* # of entries in PRL */
};
-/* ISATAP: default interval between RS in secondy */
-#define IPTUNNEL_RS_DEFAULT_DELAY (900)
-
struct ip_tunnel_prl_entry
{
struct ip_tunnel_prl_entry *next;
__be32 addr;
u16 flags;
- unsigned long rs_delay;
- struct timer_list rs_timer;
- struct ip_tunnel *tunnel;
- spinlock_t lock;
};
#define IPTUNNEL_XMIT() do { \
extern int ipv6_setsockopt(struct sock *sk, int level,
int optname,
char __user *optval,
- int optlen);
+ unsigned int optlen);
extern int ipv6_getsockopt(struct sock *sk, int level,
int optname,
char __user *optval,
int level,
int optname,
char __user *optval,
- int optlen);
+ unsigned int optlen);
extern int compat_ipv6_getsockopt(struct sock *sk,
int level,
int optname,
* to this function and ieee80211_rx_irqsafe() may not be mixed for a
* single hardware.
*
+ * Note that right now, this function must be called with softirqs disabled.
+ *
* @hw: the hardware this frame came in on
* @skb: the buffer to receive, owned by mac80211 after this call
*/
#include <net/neighbour.h>
struct ctl_table;
-struct file;
struct inet6_dev;
struct net_device;
struct net_proto_family;
#ifdef CONFIG_SYSCTL
extern int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl,
int write,
- struct file * filp,
void __user *buffer,
size_t *lenp,
loff_t *ppos);
int level,
int optname,
char __user *optval,
- int optlen);
+ unsigned int optlen);
int (*getsockopt) (struct sock *sk,
int level,
int optname,
int level,
int optname,
char __user *optval,
- int optlen);
+ unsigned int optlen);
int (*compat_getsockopt) (struct sock *sk,
int level,
int optname,
#define sk_prot __sk_common.skc_prot
#define sk_net __sk_common.skc_net
kmemcheck_bitfield_begin(flags);
- unsigned char sk_shutdown : 2,
- sk_no_check : 2,
- sk_userlocks : 4;
+ unsigned int sk_shutdown : 2,
+ sk_no_check : 2,
+ sk_userlocks : 4,
+ sk_protocol : 8,
+ sk_type : 16;
kmemcheck_bitfield_end(flags);
- unsigned char sk_protocol;
- unsigned short sk_type;
int sk_rcvbuf;
socket_lock_t sk_lock;
/*
void (*shutdown)(struct sock *sk, int how);
int (*setsockopt)(struct sock *sk, int level,
int optname, char __user *optval,
- int optlen);
+ unsigned int optlen);
int (*getsockopt)(struct sock *sk, int level,
int optname, char __user *optval,
int __user *option);
int (*compat_setsockopt)(struct sock *sk,
int level,
int optname, char __user *optval,
- int optlen);
+ unsigned int optlen);
int (*compat_getsockopt)(struct sock *sk,
int level,
int optname, char __user *optval,
extern int sock_setsockopt(struct socket *sock, int level,
int op, char __user *optval,
- int optlen);
+ unsigned int optlen);
extern int sock_getsockopt(struct socket *sock, int level,
int op, char __user *optval,
extern int sock_no_getsockopt(struct socket *, int , int,
char __user *, int __user *);
extern int sock_no_setsockopt(struct socket *, int, int,
- char __user *, int);
+ char __user *, unsigned int);
extern int sock_no_sendmsg(struct kiocb *, struct socket *,
struct msghdr *, size_t);
extern int sock_no_recvmsg(struct kiocb *, struct socket *,
extern int sock_common_recvmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t size, int flags);
extern int sock_common_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
extern int compat_sock_common_getsockopt(struct socket *sock, int level,
int optname, char __user *optval, int __user *optlen);
extern int compat_sock_common_setsockopt(struct socket *sock, int level,
- int optname, char __user *optval, int optlen);
+ int optname, char __user *optval, unsigned int optlen);
extern void sk_common_release(struct sock *sk);
int __user *optlen);
extern int tcp_setsockopt(struct sock *sk, int level,
int optname, char __user *optval,
- int optlen);
+ unsigned int optlen);
extern int compat_tcp_getsockopt(struct sock *sk,
int level, int optname,
char __user *optval, int __user *optlen);
extern int compat_tcp_setsockopt(struct sock *sk,
int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
extern void tcp_set_keepalive(struct sock *sk, int val);
extern int tcp_recvmsg(struct kiocb *iocb, struct sock *sk,
struct msghdr *msg,
extern int udp_lib_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
extern int udp_lib_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen,
+ char __user *optval, unsigned int optlen,
int (*push_pending_frames)(struct sock *));
extern struct sock *udp4_lib_lookup(struct net *net, __be32 saddr, __be16 sport,
void __user *arg);
extern int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
unsigned long arg);
+extern struct iw_statistics *get_wireless_stats(struct net_device *dev);
#else
static inline int wext_proc_init(struct net *net)
{
struct device dev;
/* data internal to the socket driver */
void *driver_data;
+ /* status of the card during resume from a system sleep state */
+ int resume_status;
};
extern struct pccard_resource_ops pccard_nonstatic_ops;
/* socket drivers are expected to use these callbacks in their .drv struct */
-extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state);
+extern int pcmcia_socket_dev_suspend(struct device *dev);
+extern void pcmcia_socket_dev_early_resume(struct device *dev);
+extern void pcmcia_socket_dev_late_resume(struct device *dev);
extern int pcmcia_socket_dev_resume(struct device *dev);
/* socket drivers use this callback in their IRQ handler */
int cmds_max; /* size of cmds array */
struct iscsi_task **cmds; /* Original Cmds arr */
struct iscsi_pool cmdpool; /* PDU's pool */
+ void *dd_data; /* LLD private data */
};
enum {
*/
extern struct iscsi_cls_session *
iscsi_session_setup(struct iscsi_transport *, struct Scsi_Host *shost,
- uint16_t, int, uint32_t, unsigned int);
+ uint16_t, int, int, uint32_t, unsigned int);
extern void iscsi_session_teardown(struct iscsi_cls_session *);
extern void iscsi_session_recovery_timedout(struct iscsi_cls_session *);
extern int iscsi_set_param(struct iscsi_cls_conn *cls_conn,
#define MI_REPORT_TARGET_PGS 0x0a
/* values for maintenance out */
#define MO_SET_TARGET_PGS 0x0a
+/* values for variable length command */
+#define READ_32 0x09
+#define WRITE_32 0x0b
/* Values for T10/04-262r7 */
#define ATA_16 0x85 /* 16-byte pass-thru */
/* OS-HBA: Protected, HBA-Target: Protected */
SCSI_PROT_READ_PASS,
SCSI_PROT_WRITE_PASS,
-
- /* OS-HBA: Protected, HBA-Target: Protected, checksum conversion */
- SCSI_PROT_READ_CONVERT,
- SCSI_PROT_WRITE_CONVERT,
};
static inline void scsi_set_prot_op(struct scsi_cmnd *scmd, unsigned char op)
static inline unsigned int scsi_host_dif_capable(struct Scsi_Host *shost, unsigned int target_type)
{
switch (target_type) {
- case 1: return shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION;
- case 2: return shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION;
- case 3: return shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION;
+ case 1:
+ if (shost->prot_capabilities & SHOST_DIF_TYPE1_PROTECTION)
+ return target_type;
+ case 2:
+ if (shost->prot_capabilities & SHOST_DIF_TYPE2_PROTECTION)
+ return target_type;
+ case 3:
+ if (shost->prot_capabilities & SHOST_DIF_TYPE3_PROTECTION)
+ return target_type;
}
return 0;
static inline unsigned int scsi_host_dix_capable(struct Scsi_Host *shost, unsigned int target_type)
{
+#if defined(CONFIG_BLK_DEV_INTEGRITY)
switch (target_type) {
case 0: return shost->prot_capabilities & SHOST_DIX_TYPE0_PROTECTION;
case 1: return shost->prot_capabilities & SHOST_DIX_TYPE1_PROTECTION;
case 2: return shost->prot_capabilities & SHOST_DIX_TYPE2_PROTECTION;
case 3: return shost->prot_capabilities & SHOST_DIX_TYPE3_PROTECTION;
}
-
+#endif
return 0;
}
(unsigned long long)__entry->old_sector)
);
+TRACE_EVENT(block_rq_remap,
+
+ TP_PROTO(struct request_queue *q, struct request *rq, dev_t dev,
+ sector_t from),
+
+ TP_ARGS(q, rq, dev, from),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( sector_t, sector )
+ __field( unsigned int, nr_sector )
+ __field( dev_t, old_dev )
+ __field( sector_t, old_sector )
+ __array( char, rwbs, 6 )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = disk_devt(rq->rq_disk);
+ __entry->sector = blk_rq_pos(rq);
+ __entry->nr_sector = blk_rq_sectors(rq);
+ __entry->old_dev = dev;
+ __entry->old_sector = from;
+ blk_fill_rwbs_rq(__entry->rwbs, rq);
+ ),
+
+ TP_printk("%d,%d %s %llu + %u <- (%d,%d) %llu",
+ MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+ (unsigned long long)__entry->sector,
+ __entry->nr_sector,
+ MAJOR(__entry->old_dev), MINOR(__entry->old_dev),
+ (unsigned long long)__entry->old_sector)
+);
+
#endif /* _TRACE_BLOCK_H */
/* This part must be outside protection */
struct ext4_allocation_request;
struct ext4_prealloc_space;
struct ext4_inode_info;
+struct mpage_da_data;
#define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode))
__field( char, for_kupdate )
__field( char, for_reclaim )
__field( char, range_cyclic )
+ __field( pgoff_t, writeback_index )
),
TP_fast_assign(
__entry->for_kupdate = wbc->for_kupdate;
__entry->for_reclaim = wbc->for_reclaim;
__entry->range_cyclic = wbc->range_cyclic;
+ __entry->writeback_index = inode->i_mapping->writeback_index;
),
- TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d",
+ TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d writeback_index %lu",
jbd2_dev_to_name(__entry->dev),
(unsigned long) __entry->ino, __entry->nr_to_write,
__entry->pages_skipped, __entry->range_start,
__entry->range_end, __entry->nonblocking,
__entry->for_kupdate, __entry->for_reclaim,
- __entry->range_cyclic)
+ __entry->range_cyclic,
+ (unsigned long) __entry->writeback_index)
);
TRACE_EVENT(ext4_da_write_pages,
__field( char, encountered_congestion )
__field( char, more_io )
__field( char, no_nrwrite_index_update )
+ __field( pgoff_t, writeback_index )
),
TP_fast_assign(
__entry->encountered_congestion = wbc->encountered_congestion;
__entry->more_io = wbc->more_io;
__entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
+ __entry->writeback_index = inode->i_mapping->writeback_index;
),
- TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d",
+ TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d writeback_index %lu",
jbd2_dev_to_name(__entry->dev),
(unsigned long) __entry->ino, __entry->ret,
__entry->pages_written, __entry->pages_skipped,
__entry->encountered_congestion, __entry->more_io,
- __entry->no_nrwrite_index_update)
+ __entry->no_nrwrite_index_update,
+ (unsigned long) __entry->writeback_index)
);
TRACE_EVENT(ext4_da_write_begin,
__entry->data_blocks, __entry->meta_blocks)
);
+TRACE_EVENT(ext4_mballoc_alloc,
+ TP_PROTO(struct ext4_allocation_context *ac),
+
+ TP_ARGS(ac),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( ino_t, ino )
+ __field( __u16, found )
+ __field( __u16, groups )
+ __field( __u16, buddy )
+ __field( __u16, flags )
+ __field( __u16, tail )
+ __field( __u8, cr )
+ __field( __u32, orig_logical )
+ __field( int, orig_start )
+ __field( __u32, orig_group )
+ __field( int, orig_len )
+ __field( __u32, goal_logical )
+ __field( int, goal_start )
+ __field( __u32, goal_group )
+ __field( int, goal_len )
+ __field( __u32, result_logical )
+ __field( int, result_start )
+ __field( __u32, result_group )
+ __field( int, result_len )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = ac->ac_inode->i_sb->s_dev;
+ __entry->ino = ac->ac_inode->i_ino;
+ __entry->found = ac->ac_found;
+ __entry->flags = ac->ac_flags;
+ __entry->groups = ac->ac_groups_scanned;
+ __entry->buddy = ac->ac_buddy;
+ __entry->tail = ac->ac_tail;
+ __entry->cr = ac->ac_criteria;
+ __entry->orig_logical = ac->ac_o_ex.fe_logical;
+ __entry->orig_start = ac->ac_o_ex.fe_start;
+ __entry->orig_group = ac->ac_o_ex.fe_group;
+ __entry->orig_len = ac->ac_o_ex.fe_len;
+ __entry->goal_logical = ac->ac_g_ex.fe_logical;
+ __entry->goal_start = ac->ac_g_ex.fe_start;
+ __entry->goal_group = ac->ac_g_ex.fe_group;
+ __entry->goal_len = ac->ac_g_ex.fe_len;
+ __entry->result_logical = ac->ac_f_ex.fe_logical;
+ __entry->result_start = ac->ac_f_ex.fe_start;
+ __entry->result_group = ac->ac_f_ex.fe_group;
+ __entry->result_len = ac->ac_f_ex.fe_len;
+ ),
+
+ TP_printk("dev %s inode %lu orig %u/%d/%u@%u goal %u/%d/%u@%u "
+ "result %u/%d/%u@%u blks %u grps %u cr %u flags 0x%04x "
+ "tail %u broken %u",
+ jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+ __entry->orig_group, __entry->orig_start,
+ __entry->orig_len, __entry->orig_logical,
+ __entry->goal_group, __entry->goal_start,
+ __entry->goal_len, __entry->goal_logical,
+ __entry->result_group, __entry->result_start,
+ __entry->result_len, __entry->result_logical,
+ __entry->found, __entry->groups, __entry->cr,
+ __entry->flags, __entry->tail,
+ __entry->buddy ? 1 << __entry->buddy : 0)
+);
+
+TRACE_EVENT(ext4_mballoc_prealloc,
+ TP_PROTO(struct ext4_allocation_context *ac),
+
+ TP_ARGS(ac),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( ino_t, ino )
+ __field( __u32, orig_logical )
+ __field( int, orig_start )
+ __field( __u32, orig_group )
+ __field( int, orig_len )
+ __field( __u32, result_logical )
+ __field( int, result_start )
+ __field( __u32, result_group )
+ __field( int, result_len )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = ac->ac_inode->i_sb->s_dev;
+ __entry->ino = ac->ac_inode->i_ino;
+ __entry->orig_logical = ac->ac_o_ex.fe_logical;
+ __entry->orig_start = ac->ac_o_ex.fe_start;
+ __entry->orig_group = ac->ac_o_ex.fe_group;
+ __entry->orig_len = ac->ac_o_ex.fe_len;
+ __entry->result_logical = ac->ac_b_ex.fe_logical;
+ __entry->result_start = ac->ac_b_ex.fe_start;
+ __entry->result_group = ac->ac_b_ex.fe_group;
+ __entry->result_len = ac->ac_b_ex.fe_len;
+ ),
+
+ TP_printk("dev %s inode %lu orig %u/%d/%u@%u result %u/%d/%u@%u",
+ jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+ __entry->orig_group, __entry->orig_start,
+ __entry->orig_len, __entry->orig_logical,
+ __entry->result_group, __entry->result_start,
+ __entry->result_len, __entry->result_logical)
+);
+
+TRACE_EVENT(ext4_mballoc_discard,
+ TP_PROTO(struct ext4_allocation_context *ac),
+
+ TP_ARGS(ac),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( ino_t, ino )
+ __field( __u32, result_logical )
+ __field( int, result_start )
+ __field( __u32, result_group )
+ __field( int, result_len )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = ac->ac_inode->i_sb->s_dev;
+ __entry->ino = ac->ac_inode->i_ino;
+ __entry->result_logical = ac->ac_b_ex.fe_logical;
+ __entry->result_start = ac->ac_b_ex.fe_start;
+ __entry->result_group = ac->ac_b_ex.fe_group;
+ __entry->result_len = ac->ac_b_ex.fe_len;
+ ),
+
+ TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
+ jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+ __entry->result_group, __entry->result_start,
+ __entry->result_len, __entry->result_logical)
+);
+
+TRACE_EVENT(ext4_mballoc_free,
+ TP_PROTO(struct ext4_allocation_context *ac),
+
+ TP_ARGS(ac),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( ino_t, ino )
+ __field( __u32, result_logical )
+ __field( int, result_start )
+ __field( __u32, result_group )
+ __field( int, result_len )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = ac->ac_inode->i_sb->s_dev;
+ __entry->ino = ac->ac_inode->i_ino;
+ __entry->result_logical = ac->ac_b_ex.fe_logical;
+ __entry->result_start = ac->ac_b_ex.fe_start;
+ __entry->result_group = ac->ac_b_ex.fe_group;
+ __entry->result_len = ac->ac_b_ex.fe_len;
+ ),
+
+ TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
+ jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+ __entry->result_group, __entry->result_start,
+ __entry->result_len, __entry->result_logical)
+);
+
#endif /* _TRACE_EXT4_H */
/* This part must be outside protection */
#include <linux/jbd2.h>
#include <linux/tracepoint.h>
+struct transaction_chp_stats_s;
+struct transaction_run_stats_s;
+
TRACE_EVENT(jbd2_checkpoint,
TP_PROTO(journal_t *journal, int result),
jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino)
);
+TRACE_EVENT(jbd2_run_stats,
+ TP_PROTO(dev_t dev, unsigned long tid,
+ struct transaction_run_stats_s *stats),
+
+ TP_ARGS(dev, tid, stats),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( unsigned long, tid )
+ __field( unsigned long, wait )
+ __field( unsigned long, running )
+ __field( unsigned long, locked )
+ __field( unsigned long, flushing )
+ __field( unsigned long, logging )
+ __field( __u32, handle_count )
+ __field( __u32, blocks )
+ __field( __u32, blocks_logged )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ __entry->tid = tid;
+ __entry->wait = stats->rs_wait;
+ __entry->running = stats->rs_running;
+ __entry->locked = stats->rs_locked;
+ __entry->flushing = stats->rs_flushing;
+ __entry->logging = stats->rs_logging;
+ __entry->handle_count = stats->rs_handle_count;
+ __entry->blocks = stats->rs_blocks;
+ __entry->blocks_logged = stats->rs_blocks_logged;
+ ),
+
+ TP_printk("dev %s tid %lu wait %u running %u locked %u flushing %u "
+ "logging %u handle_count %u blocks %u blocks_logged %u",
+ jbd2_dev_to_name(__entry->dev), __entry->tid,
+ jiffies_to_msecs(__entry->wait),
+ jiffies_to_msecs(__entry->running),
+ jiffies_to_msecs(__entry->locked),
+ jiffies_to_msecs(__entry->flushing),
+ jiffies_to_msecs(__entry->logging),
+ __entry->handle_count, __entry->blocks,
+ __entry->blocks_logged)
+);
+
+TRACE_EVENT(jbd2_checkpoint_stats,
+ TP_PROTO(dev_t dev, unsigned long tid,
+ struct transaction_chp_stats_s *stats),
+
+ TP_ARGS(dev, tid, stats),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( unsigned long, tid )
+ __field( unsigned long, chp_time )
+ __field( __u32, forced_to_close )
+ __field( __u32, written )
+ __field( __u32, dropped )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev;
+ __entry->tid = tid;
+ __entry->chp_time = stats->cs_chp_time;
+ __entry->forced_to_close= stats->cs_forced_to_close;
+ __entry->written = stats->cs_written;
+ __entry->dropped = stats->cs_dropped;
+ ),
+
+ TP_printk("dev %s tid %lu chp_time %u forced_to_close %u "
+ "written %u dropped %u",
+ jbd2_dev_to_name(__entry->dev), __entry->tid,
+ jiffies_to_msecs(__entry->chp_time),
+ __entry->forced_to_close, __entry->written, __entry->dropped)
+);
+
#endif /* _TRACE_JBD2_H */
/* This part must be outside protection */
__entry->func = work->func;
),
- TP_printk("thread=%s:%d func=%pF", __entry->thread_comm,
+ TP_printk("thread=%s:%d func=%pf", __entry->thread_comm,
__entry->thread_pid, __entry->func)
);
__entry->func = work->func;
),
- TP_printk("thread=%s:%d func=%pF", __entry->thread_comm,
+ TP_printk("thread=%s:%d func=%pf", __entry->thread_comm,
__entry->thread_pid, __entry->func)
);
config AUDITSYSCALL
bool "Enable system-call auditing support"
- depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64|| SUPERH)
+ depends on AUDIT && (X86 || PPC || S390 || IA64 || UML || SPARC64 || SUPERH)
default y if SECURITY_SELINUX
help
Enable low-overhead system-call auditing infrastructure that
help
See tools/perf/design.txt for details.
+config PERF_USE_VMALLOC
+ bool
+ help
+ See tools/perf/design.txt for details
+
menu "Kernel Performance Events And Counters"
config PERF_EVENTS
Say N if unsure.
+config DEBUG_PERF_USE_VMALLOC
+ default n
+ bool "Debug: use vmalloc to back perf mmap() buffers"
+ depends on PERF_EVENTS && DEBUG_KERNEL
+ select PERF_USE_VMALLOC
+ help
+ Use vmalloc memory to back perf mmap() buffers.
+
+ Mostly useful for debugging the vmalloc code on platforms
+ that don't require it.
+
+ Say N if unsure.
+
endmenu
config VM_EVENT_COUNTERS
SLUB sysfs support. /sys/slab will not exist and there will be
no support for cache validation etc.
-config STRIP_ASM_SYMS
- bool "Strip assembler-generated symbols during link"
- default n
- help
- Strip internal assembler-generated symbols during a link (symbols
- that look like '.Lxxx') so they don't pollute the output of
- get_wchan() and suchlike.
-
config COMPAT_BRK
bool "Disable heap randomization"
default y
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/delay.h>
-#include <linux/utsname.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
#else
-#if NR_CPUS > BITS_PER_LONG
-cpumask_t cpu_mask_all __read_mostly = CPU_MASK_ALL;
-EXPORT_SYMBOL(cpu_mask_all);
-#endif
-
/* Setup number of possible processor ids */
int nr_cpu_ids __read_mostly = NR_CPUS;
EXPORT_SYMBOL(nr_cpu_ids);
*/
static void __init do_basic_setup(void)
{
- rcu_init_sched(); /* needed by module_init stage. */
init_workqueues();
cpuset_init_smp();
usermodehelper_init();
}
#ifdef CONFIG_PROC_SYSCTL
-static int proc_ipc_dointvec(ctl_table *table, int write, struct file *filp,
+static int proc_ipc_dointvec(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table ipc_table;
memcpy(&ipc_table, table, sizeof(ipc_table));
ipc_table.data = get_ipc(table);
- return proc_dointvec(&ipc_table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec(&ipc_table, write, buffer, lenp, ppos);
}
static int proc_ipc_callback_dointvec(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table ipc_table;
size_t lenp_bef = *lenp;
memcpy(&ipc_table, table, sizeof(ipc_table));
ipc_table.data = get_ipc(table);
- rc = proc_dointvec(&ipc_table, write, filp, buffer, lenp, ppos);
+ rc = proc_dointvec(&ipc_table, write, buffer, lenp, ppos);
if (write && !rc && lenp_bef == *lenp)
/*
}
static int proc_ipc_doulongvec_minmax(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table ipc_table;
memcpy(&ipc_table, table, sizeof(ipc_table));
ipc_table.data = get_ipc(table);
- return proc_doulongvec_minmax(&ipc_table, write, filp, buffer,
+ return proc_doulongvec_minmax(&ipc_table, write, buffer,
lenp, ppos);
}
}
static int proc_ipcauto_dointvec_minmax(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table ipc_table;
size_t lenp_bef = *lenp;
ipc_table.data = get_ipc(table);
oldval = *((int *)(ipc_table.data));
- rc = proc_dointvec_minmax(&ipc_table, write, filp, buffer, lenp, ppos);
+ rc = proc_dointvec_minmax(&ipc_table, write, buffer, lenp, ppos);
if (write && !rc && lenp_bef == *lenp) {
int newval = *((int *)(ipc_table.data));
return which;
}
-static int proc_mq_dointvec(ctl_table *table, int write, struct file *filp,
+static int proc_mq_dointvec(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table mq_table;
memcpy(&mq_table, table, sizeof(mq_table));
mq_table.data = get_mq(table);
- return proc_dointvec(&mq_table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec(&mq_table, write, buffer, lenp, ppos);
}
static int proc_mq_dointvec_minmax(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+ void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table mq_table;
memcpy(&mq_table, table, sizeof(mq_table));
mq_table.data = get_mq(table);
- return proc_dointvec_minmax(&mq_table, write, filp, buffer,
+ return proc_dointvec_minmax(&mq_table, write, buffer,
lenp, ppos);
}
#else
#define shm_file_data(file) (*((struct shm_file_data **)&(file)->private_data))
static const struct file_operations shm_file_operations;
-static struct vm_operations_struct shm_vm_ops;
+static const struct vm_operations_struct shm_vm_ops;
#define shm_ids(ns) ((ns)->ids[IPC_SHM_IDS])
.get_unmapped_area = shm_get_unmapped_area,
};
-static struct vm_operations_struct shm_vm_ops = {
+static const struct vm_operations_struct shm_vm_ops = {
.open = shm_open, /* callback for a new vm-area open */
.close = shm_close, /* callback for when the vm-area is released */
.fault = shm_fault,
obj-$(CONFIG_BACKTRACE_SELF_TEST) += backtracetest.o
obj-$(CONFIG_COMPAT) += compat.o
obj-$(CONFIG_CGROUPS) += cgroup.o
-obj-$(CONFIG_CGROUP_DEBUG) += cgroup_debug.o
obj-$(CONFIG_CGROUP_FREEZER) += cgroup_freezer.o
obj-$(CONFIG_CPUSETS) += cpuset.o
obj-$(CONFIG_CGROUP_NS) += ns_cgroup.o
break;
}
case AUDIT_SIGNAL_INFO:
- err = security_secid_to_secctx(audit_sig_sid, &ctx, &len);
- if (err)
- return err;
+ len = 0;
+ if (audit_sig_sid) {
+ err = security_secid_to_secctx(audit_sig_sid, &ctx, &len);
+ if (err)
+ return err;
+ }
sig_data = kmalloc(sizeof(*sig_data) + len, GFP_KERNEL);
if (!sig_data) {
- security_release_secctx(ctx, len);
+ if (audit_sig_sid)
+ security_release_secctx(ctx, len);
return -ENOMEM;
}
sig_data->uid = audit_sig_uid;
sig_data->pid = audit_sig_pid;
- memcpy(sig_data->ctx, ctx, len);
- security_release_secctx(ctx, len);
+ if (audit_sig_sid) {
+ memcpy(sig_data->ctx, ctx, len);
+ security_release_secctx(ctx, len);
+ }
audit_send_reply(NETLINK_CB(skb).pid, seq, AUDIT_SIGNAL_INFO,
0, 0, sig_data, sizeof(*sig_data) + len);
kfree(sig_data);
struct audit_watch {
atomic_t count; /* reference count */
- char *path; /* insertion path */
dev_t dev; /* associated superblock device */
+ char *path; /* insertion path */
unsigned long ino; /* associated inode number */
struct audit_parent *parent; /* associated parent */
struct list_head wlist; /* entry in parent->watches list */
int in_syscall; /* 1 if task is in a syscall */
enum audit_state state, current_state;
unsigned int serial; /* serial number for record */
- struct timespec ctime; /* time of syscall entry */
int major; /* syscall number */
+ struct timespec ctime; /* time of syscall entry */
unsigned long argv[4]; /* syscall arguments */
- int return_valid; /* return code is valid */
long return_code;/* syscall return code */
u64 prio;
+ int return_valid; /* return code is valid */
int name_count;
struct audit_names names[AUDIT_NAMES];
char * filterkey; /* key for rule that triggered record */
char target_comm[TASK_COMM_LEN];
struct audit_tree_refs *trees, *first_trees;
- int tree_count;
struct list_head killed_trees;
+ int tree_count;
int type;
union {
*/
#include <linux/cgroup.h>
+#include <linux/ctype.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/namei.h>
#include <linux/smp_lock.h>
#include <linux/pid_namespace.h>
+#include <linux/idr.h>
+#include <linux/vmalloc.h> /* TODO: replace with more sophisticated array */
#include <asm/atomic.h>
#include <linux/cgroup_subsys.h>
};
+#define MAX_CGROUP_ROOT_NAMELEN 64
+
/*
* A cgroupfs_root represents the root of a cgroup hierarchy,
* and may be associated with a superblock to form an active
*/
unsigned long subsys_bits;
+ /* Unique id for this hierarchy. */
+ int hierarchy_id;
+
/* The bitmask of subsystems currently attached to this hierarchy */
unsigned long actual_subsys_bits;
/* The path to use for release notifications. */
char release_agent_path[PATH_MAX];
+
+ /* The name for this hierarchy - may be empty */
+ char name[MAX_CGROUP_ROOT_NAMELEN];
};
/*
static LIST_HEAD(roots);
static int root_count;
+static DEFINE_IDA(hierarchy_ida);
+static int next_hierarchy_id;
+static DEFINE_SPINLOCK(hierarchy_id_lock);
+
/* dummytop is a shorthand for the dummy hierarchy's top cgroup */
#define dummytop (&rootnode.top_cgroup)
* cgroup, anchored on cgroup->css_sets
*/
struct list_head cgrp_link_list;
+ struct cgroup *cgrp;
/*
* List running through cg_cgroup_links pointing at a
* single css_set object, anchored on css_set->cg_links
static DEFINE_RWLOCK(css_set_lock);
static int css_set_count;
-/* hash table for cgroup groups. This improves the performance to
- * find an existing css_set */
+/*
+ * hash table for cgroup groups. This improves the performance to find
+ * an existing css_set. This hash doesn't (currently) take into
+ * account cgroups in empty hierarchies.
+ */
#define CSS_SET_HASH_BITS 7
#define CSS_SET_TABLE_SIZE (1 << CSS_SET_HASH_BITS)
static struct hlist_head css_set_table[CSS_SET_TABLE_SIZE];
return &css_set_table[index];
}
+static void free_css_set_rcu(struct rcu_head *obj)
+{
+ struct css_set *cg = container_of(obj, struct css_set, rcu_head);
+ kfree(cg);
+}
+
/* We don't maintain the lists running through each css_set to its
* task until after the first call to cgroup_iter_start(). This
* reduces the fork()/exit() overhead for people who have cgroups
* compiled into their kernel but not actually in use */
static int use_task_css_set_links __read_mostly;
-/* When we create or destroy a css_set, the operation simply
- * takes/releases a reference count on all the cgroups referenced
- * by subsystems in this css_set. This can end up multiple-counting
- * some cgroups, but that's OK - the ref-count is just a
- * busy/not-busy indicator; ensuring that we only count each cgroup
- * once would require taking a global lock to ensure that no
- * subsystems moved between hierarchies while we were doing so.
- *
- * Possible TODO: decide at boot time based on the number of
- * registered subsystems and the number of CPUs or NUMA nodes whether
- * it's better for performance to ref-count every subsystem, or to
- * take a global lock and only add one ref count to each hierarchy.
- */
-
-/*
- * unlink a css_set from the list and free it
- */
-static void unlink_css_set(struct css_set *cg)
+static void __put_css_set(struct css_set *cg, int taskexit)
{
struct cg_cgroup_link *link;
struct cg_cgroup_link *saved_link;
-
- hlist_del(&cg->hlist);
- css_set_count--;
-
- list_for_each_entry_safe(link, saved_link, &cg->cg_links,
- cg_link_list) {
- list_del(&link->cg_link_list);
- list_del(&link->cgrp_link_list);
- kfree(link);
- }
-}
-
-static void __put_css_set(struct css_set *cg, int taskexit)
-{
- int i;
/*
* Ensure that the refcount doesn't hit zero while any readers
* can see it. Similar to atomic_dec_and_lock(), but for an
write_unlock(&css_set_lock);
return;
}
- unlink_css_set(cg);
- write_unlock(&css_set_lock);
- rcu_read_lock();
- for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
- struct cgroup *cgrp = rcu_dereference(cg->subsys[i]->cgroup);
+ /* This css_set is dead. unlink it and release cgroup refcounts */
+ hlist_del(&cg->hlist);
+ css_set_count--;
+
+ list_for_each_entry_safe(link, saved_link, &cg->cg_links,
+ cg_link_list) {
+ struct cgroup *cgrp = link->cgrp;
+ list_del(&link->cg_link_list);
+ list_del(&link->cgrp_link_list);
if (atomic_dec_and_test(&cgrp->count) &&
notify_on_release(cgrp)) {
if (taskexit)
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
}
+
+ kfree(link);
}
- rcu_read_unlock();
- kfree(cg);
+
+ write_unlock(&css_set_lock);
+ call_rcu(&cg->rcu_head, free_css_set_rcu);
}
/*
__put_css_set(cg, 1);
}
+/*
+ * compare_css_sets - helper function for find_existing_css_set().
+ * @cg: candidate css_set being tested
+ * @old_cg: existing css_set for a task
+ * @new_cgrp: cgroup that's being entered by the task
+ * @template: desired set of css pointers in css_set (pre-calculated)
+ *
+ * Returns true if "cg" matches "old_cg" except for the hierarchy
+ * which "new_cgrp" belongs to, for which it should match "new_cgrp".
+ */
+static bool compare_css_sets(struct css_set *cg,
+ struct css_set *old_cg,
+ struct cgroup *new_cgrp,
+ struct cgroup_subsys_state *template[])
+{
+ struct list_head *l1, *l2;
+
+ if (memcmp(template, cg->subsys, sizeof(cg->subsys))) {
+ /* Not all subsystems matched */
+ return false;
+ }
+
+ /*
+ * Compare cgroup pointers in order to distinguish between
+ * different cgroups in heirarchies with no subsystems. We
+ * could get by with just this check alone (and skip the
+ * memcmp above) but on most setups the memcmp check will
+ * avoid the need for this more expensive check on almost all
+ * candidates.
+ */
+
+ l1 = &cg->cg_links;
+ l2 = &old_cg->cg_links;
+ while (1) {
+ struct cg_cgroup_link *cgl1, *cgl2;
+ struct cgroup *cg1, *cg2;
+
+ l1 = l1->next;
+ l2 = l2->next;
+ /* See if we reached the end - both lists are equal length. */
+ if (l1 == &cg->cg_links) {
+ BUG_ON(l2 != &old_cg->cg_links);
+ break;
+ } else {
+ BUG_ON(l2 == &old_cg->cg_links);
+ }
+ /* Locate the cgroups associated with these links. */
+ cgl1 = list_entry(l1, struct cg_cgroup_link, cg_link_list);
+ cgl2 = list_entry(l2, struct cg_cgroup_link, cg_link_list);
+ cg1 = cgl1->cgrp;
+ cg2 = cgl2->cgrp;
+ /* Hierarchies should be linked in the same order. */
+ BUG_ON(cg1->root != cg2->root);
+
+ /*
+ * If this hierarchy is the hierarchy of the cgroup
+ * that's changing, then we need to check that this
+ * css_set points to the new cgroup; if it's any other
+ * hierarchy, then this css_set should point to the
+ * same cgroup as the old css_set.
+ */
+ if (cg1->root == new_cgrp->root) {
+ if (cg1 != new_cgrp)
+ return false;
+ } else {
+ if (cg1 != cg2)
+ return false;
+ }
+ }
+ return true;
+}
+
/*
* find_existing_css_set() is a helper for
* find_css_set(), and checks to see whether an existing
hhead = css_set_hash(template);
hlist_for_each_entry(cg, node, hhead, hlist) {
- if (!memcmp(template, cg->subsys, sizeof(cg->subsys))) {
- /* All subsystems matched */
- return cg;
- }
+ if (!compare_css_sets(cg, oldcg, cgrp, template))
+ continue;
+
+ /* This css_set matches what we need */
+ return cg;
}
/* No existing cgroup group matched */
link = list_first_entry(tmp_cg_links, struct cg_cgroup_link,
cgrp_link_list);
link->cg = cg;
+ link->cgrp = cgrp;
+ atomic_inc(&cgrp->count);
list_move(&link->cgrp_link_list, &cgrp->css_sets);
- list_add(&link->cg_link_list, &cg->cg_links);
+ /*
+ * Always add links to the tail of the list so that the list
+ * is sorted by order of hierarchy creation
+ */
+ list_add_tail(&link->cg_link_list, &cg->cg_links);
}
/*
{
struct css_set *res;
struct cgroup_subsys_state *template[CGROUP_SUBSYS_COUNT];
- int i;
struct list_head tmp_cg_links;
struct hlist_head *hhead;
+ struct cg_cgroup_link *link;
/* First see if we already have a cgroup group that matches
* the desired set */
write_lock(&css_set_lock);
/* Add reference counts and links from the new css_set. */
- for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
- struct cgroup *cgrp = res->subsys[i]->cgroup;
- struct cgroup_subsys *ss = subsys[i];
- atomic_inc(&cgrp->count);
- /*
- * We want to add a link once per cgroup, so we
- * only do it for the first subsystem in each
- * hierarchy
- */
- if (ss->root->subsys_list.next == &ss->sibling)
- link_css_set(&tmp_cg_links, res, cgrp);
+ list_for_each_entry(link, &oldcg->cg_links, cg_link_list) {
+ struct cgroup *c = link->cgrp;
+ if (c->root == cgrp->root)
+ c = cgrp;
+ link_css_set(&tmp_cg_links, res, c);
}
- if (list_empty(&rootnode.subsys_list))
- link_css_set(&tmp_cg_links, res, dummytop);
BUG_ON(!list_empty(&tmp_cg_links));
return res;
}
+/*
+ * Return the cgroup for "task" from the given hierarchy. Must be
+ * called with cgroup_mutex held.
+ */
+static struct cgroup *task_cgroup_from_root(struct task_struct *task,
+ struct cgroupfs_root *root)
+{
+ struct css_set *css;
+ struct cgroup *res = NULL;
+
+ BUG_ON(!mutex_is_locked(&cgroup_mutex));
+ read_lock(&css_set_lock);
+ /*
+ * No need to lock the task - since we hold cgroup_mutex the
+ * task can't change groups, so the only thing that can happen
+ * is that it exits and its css is set back to init_css_set.
+ */
+ css = task->cgroups;
+ if (css == &init_css_set) {
+ res = &root->top_cgroup;
+ } else {
+ struct cg_cgroup_link *link;
+ list_for_each_entry(link, &css->cg_links, cg_link_list) {
+ struct cgroup *c = link->cgrp;
+ if (c->root == root) {
+ res = c;
+ break;
+ }
+ }
+ }
+ read_unlock(&css_set_lock);
+ BUG_ON(!res);
+ return res;
+}
+
/*
* There is one global cgroup mutex. We also require taking
* task_lock() when dereferencing a task's cgroup subsys pointers.
static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry);
static int cgroup_populate_dir(struct cgroup *cgrp);
static const struct inode_operations cgroup_dir_inode_operations;
-static struct file_operations proc_cgroupstats_operations;
+static const struct file_operations proc_cgroupstats_operations;
static struct backing_dev_info cgroup_backing_dev_info = {
.name = "cgroup",
*/
deactivate_super(cgrp->root->sb);
+ /*
+ * if we're getting rid of the cgroup, refcount should ensure
+ * that there are no pidlists left.
+ */
+ BUG_ON(!list_empty(&cgrp->pidlists));
+
call_rcu(&cgrp->rcu_head, free_cgroup_rcu);
}
iput(inode);
seq_puts(seq, ",noprefix");
if (strlen(root->release_agent_path))
seq_printf(seq, ",release_agent=%s", root->release_agent_path);
+ if (strlen(root->name))
+ seq_printf(seq, ",name=%s", root->name);
mutex_unlock(&cgroup_mutex);
return 0;
}
unsigned long subsys_bits;
unsigned long flags;
char *release_agent;
+ char *name;
+ /* User explicitly requested empty subsystem */
+ bool none;
+
+ struct cgroupfs_root *new_root;
+
};
/* Convert a hierarchy specifier into a bitmask of subsystems and
mask = ~(1UL << cpuset_subsys_id);
#endif
- opts->subsys_bits = 0;
- opts->flags = 0;
- opts->release_agent = NULL;
+ memset(opts, 0, sizeof(*opts));
while ((token = strsep(&o, ",")) != NULL) {
if (!*token)
if (!ss->disabled)
opts->subsys_bits |= 1ul << i;
}
+ } else if (!strcmp(token, "none")) {
+ /* Explicitly have no subsystems */
+ opts->none = true;
} else if (!strcmp(token, "noprefix")) {
set_bit(ROOT_NOPREFIX, &opts->flags);
} else if (!strncmp(token, "release_agent=", 14)) {
/* Specifying two release agents is forbidden */
if (opts->release_agent)
return -EINVAL;
- opts->release_agent = kzalloc(PATH_MAX, GFP_KERNEL);
+ opts->release_agent =
+ kstrndup(token + 14, PATH_MAX, GFP_KERNEL);
if (!opts->release_agent)
return -ENOMEM;
- strncpy(opts->release_agent, token + 14, PATH_MAX - 1);
- opts->release_agent[PATH_MAX - 1] = 0;
+ } else if (!strncmp(token, "name=", 5)) {
+ int i;
+ const char *name = token + 5;
+ /* Can't specify an empty name */
+ if (!strlen(name))
+ return -EINVAL;
+ /* Must match [\w.-]+ */
+ for (i = 0; i < strlen(name); i++) {
+ char c = name[i];
+ if (isalnum(c))
+ continue;
+ if ((c == '.') || (c == '-') || (c == '_'))
+ continue;
+ return -EINVAL;
+ }
+ /* Specifying two names is forbidden */
+ if (opts->name)
+ return -EINVAL;
+ opts->name = kstrndup(name,
+ MAX_CGROUP_ROOT_NAMELEN,
+ GFP_KERNEL);
+ if (!opts->name)
+ return -ENOMEM;
} else {
struct cgroup_subsys *ss;
int i;
}
}
+ /* Consistency checks */
+
/*
* Option noprefix was introduced just for backward compatibility
* with the old cpuset, so we allow noprefix only if mounting just
(opts->subsys_bits & mask))
return -EINVAL;
- /* We can't have an empty hierarchy */
- if (!opts->subsys_bits)
+
+ /* Can't specify "none" and some subsystems */
+ if (opts->subsys_bits && opts->none)
+ return -EINVAL;
+
+ /*
+ * We either have to specify by name or by subsystems. (So all
+ * empty hierarchies must have a name).
+ */
+ if (!opts->subsys_bits && !opts->name)
return -EINVAL;
return 0;
goto out_unlock;
}
+ /* Don't allow name to change at remount */
+ if (opts.name && strcmp(opts.name, root->name)) {
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
ret = rebind_subsystems(root, opts.subsys_bits);
if (ret)
goto out_unlock;
strcpy(root->release_agent_path, opts.release_agent);
out_unlock:
kfree(opts.release_agent);
+ kfree(opts.name);
mutex_unlock(&cgroup_mutex);
mutex_unlock(&cgrp->dentry->d_inode->i_mutex);
unlock_kernel();
INIT_LIST_HEAD(&cgrp->children);
INIT_LIST_HEAD(&cgrp->css_sets);
INIT_LIST_HEAD(&cgrp->release_list);
- INIT_LIST_HEAD(&cgrp->pids_list);
- init_rwsem(&cgrp->pids_mutex);
+ INIT_LIST_HEAD(&cgrp->pidlists);
+ mutex_init(&cgrp->pidlist_mutex);
}
+
static void init_cgroup_root(struct cgroupfs_root *root)
{
struct cgroup *cgrp = &root->top_cgroup;
init_cgroup_housekeeping(cgrp);
}
+static bool init_root_id(struct cgroupfs_root *root)
+{
+ int ret = 0;
+
+ do {
+ if (!ida_pre_get(&hierarchy_ida, GFP_KERNEL))
+ return false;
+ spin_lock(&hierarchy_id_lock);
+ /* Try to allocate the next unused ID */
+ ret = ida_get_new_above(&hierarchy_ida, next_hierarchy_id,
+ &root->hierarchy_id);
+ if (ret == -ENOSPC)
+ /* Try again starting from 0 */
+ ret = ida_get_new(&hierarchy_ida, &root->hierarchy_id);
+ if (!ret) {
+ next_hierarchy_id = root->hierarchy_id + 1;
+ } else if (ret != -EAGAIN) {
+ /* Can only get here if the 31-bit IDR is full ... */
+ BUG_ON(ret);
+ }
+ spin_unlock(&hierarchy_id_lock);
+ } while (ret);
+ return true;
+}
+
static int cgroup_test_super(struct super_block *sb, void *data)
{
- struct cgroupfs_root *new = data;
+ struct cgroup_sb_opts *opts = data;
struct cgroupfs_root *root = sb->s_fs_info;
- /* First check subsystems */
- if (new->subsys_bits != root->subsys_bits)
- return 0;
+ /* If we asked for a name then it must match */
+ if (opts->name && strcmp(opts->name, root->name))
+ return 0;
- /* Next check flags */
- if (new->flags != root->flags)
+ /*
+ * If we asked for subsystems (or explicitly for no
+ * subsystems) then they must match
+ */
+ if ((opts->subsys_bits || opts->none)
+ && (opts->subsys_bits != root->subsys_bits))
return 0;
return 1;
}
+static struct cgroupfs_root *cgroup_root_from_opts(struct cgroup_sb_opts *opts)
+{
+ struct cgroupfs_root *root;
+
+ if (!opts->subsys_bits && !opts->none)
+ return NULL;
+
+ root = kzalloc(sizeof(*root), GFP_KERNEL);
+ if (!root)
+ return ERR_PTR(-ENOMEM);
+
+ if (!init_root_id(root)) {
+ kfree(root);
+ return ERR_PTR(-ENOMEM);
+ }
+ init_cgroup_root(root);
+
+ root->subsys_bits = opts->subsys_bits;
+ root->flags = opts->flags;
+ if (opts->release_agent)
+ strcpy(root->release_agent_path, opts->release_agent);
+ if (opts->name)
+ strcpy(root->name, opts->name);
+ return root;
+}
+
+static void cgroup_drop_root(struct cgroupfs_root *root)
+{
+ if (!root)
+ return;
+
+ BUG_ON(!root->hierarchy_id);
+ spin_lock(&hierarchy_id_lock);
+ ida_remove(&hierarchy_ida, root->hierarchy_id);
+ spin_unlock(&hierarchy_id_lock);
+ kfree(root);
+}
+
static int cgroup_set_super(struct super_block *sb, void *data)
{
int ret;
- struct cgroupfs_root *root = data;
+ struct cgroup_sb_opts *opts = data;
+
+ /* If we don't have a new root, we can't set up a new sb */
+ if (!opts->new_root)
+ return -EINVAL;
+
+ BUG_ON(!opts->subsys_bits && !opts->none);
ret = set_anon_super(sb, NULL);
if (ret)
return ret;
- sb->s_fs_info = root;
- root->sb = sb;
+ sb->s_fs_info = opts->new_root;
+ opts->new_root->sb = sb;
sb->s_blocksize = PAGE_CACHE_SIZE;
sb->s_blocksize_bits = PAGE_CACHE_SHIFT;
void *data, struct vfsmount *mnt)
{
struct cgroup_sb_opts opts;
+ struct cgroupfs_root *root;
int ret = 0;
struct super_block *sb;
- struct cgroupfs_root *root;
- struct list_head tmp_cg_links;
+ struct cgroupfs_root *new_root;
/* First find the desired set of subsystems */
ret = parse_cgroupfs_options(data, &opts);
- if (ret) {
- kfree(opts.release_agent);
- return ret;
- }
-
- root = kzalloc(sizeof(*root), GFP_KERNEL);
- if (!root) {
- kfree(opts.release_agent);
- return -ENOMEM;
- }
+ if (ret)
+ goto out_err;
- init_cgroup_root(root);
- root->subsys_bits = opts.subsys_bits;
- root->flags = opts.flags;
- if (opts.release_agent) {
- strcpy(root->release_agent_path, opts.release_agent);
- kfree(opts.release_agent);
+ /*
+ * Allocate a new cgroup root. We may not need it if we're
+ * reusing an existing hierarchy.
+ */
+ new_root = cgroup_root_from_opts(&opts);
+ if (IS_ERR(new_root)) {
+ ret = PTR_ERR(new_root);
+ goto out_err;
}
+ opts.new_root = new_root;
- sb = sget(fs_type, cgroup_test_super, cgroup_set_super, root);
-
+ /* Locate an existing or new sb for this hierarchy */
+ sb = sget(fs_type, cgroup_test_super, cgroup_set_super, &opts);
if (IS_ERR(sb)) {
- kfree(root);
- return PTR_ERR(sb);
+ ret = PTR_ERR(sb);
+ cgroup_drop_root(opts.new_root);
+ goto out_err;
}
- if (sb->s_fs_info != root) {
- /* Reusing an existing superblock */
- BUG_ON(sb->s_root == NULL);
- kfree(root);
- root = NULL;
- } else {
- /* New superblock */
+ root = sb->s_fs_info;
+ BUG_ON(!root);
+ if (root == opts.new_root) {
+ /* We used the new root structure, so this is a new hierarchy */
+ struct list_head tmp_cg_links;
struct cgroup *root_cgrp = &root->top_cgroup;
struct inode *inode;
+ struct cgroupfs_root *existing_root;
int i;
BUG_ON(sb->s_root != NULL);
mutex_lock(&inode->i_mutex);
mutex_lock(&cgroup_mutex);
+ if (strlen(root->name)) {
+ /* Check for name clashes with existing mounts */
+ for_each_active_root(existing_root) {
+ if (!strcmp(existing_root->name, root->name)) {
+ ret = -EBUSY;
+ mutex_unlock(&cgroup_mutex);
+ mutex_unlock(&inode->i_mutex);
+ goto drop_new_super;
+ }
+ }
+ }
+
/*
* We're accessing css_set_count without locking
* css_set_lock here, but that's OK - it can only be
if (ret == -EBUSY) {
mutex_unlock(&cgroup_mutex);
mutex_unlock(&inode->i_mutex);
- goto free_cg_links;
+ free_cg_links(&tmp_cg_links);
+ goto drop_new_super;
}
/* EBUSY should be the only error here */
BUG_ON(root->number_of_cgroups != 1);
cgroup_populate_dir(root_cgrp);
- mutex_unlock(&inode->i_mutex);
mutex_unlock(&cgroup_mutex);
+ mutex_unlock(&inode->i_mutex);
+ } else {
+ /*
+ * We re-used an existing hierarchy - the new root (if
+ * any) is not needed
+ */
+ cgroup_drop_root(opts.new_root);
}
simple_set_mnt(mnt, sb);
+ kfree(opts.release_agent);
+ kfree(opts.name);
return 0;
- free_cg_links:
- free_cg_links(&tmp_cg_links);
drop_new_super:
deactivate_locked_super(sb);
+ out_err:
+ kfree(opts.release_agent);
+ kfree(opts.name);
+
return ret;
}
mutex_unlock(&cgroup_mutex);
kill_litter_super(sb);
- kfree(root);
+ cgroup_drop_root(root);
}
static struct file_system_type cgroup_fs_type = {
return 0;
}
-/*
- * Return the first subsystem attached to a cgroup's hierarchy, and
- * its subsystem id.
- */
-
-static void get_first_subsys(const struct cgroup *cgrp,
- struct cgroup_subsys_state **css, int *subsys_id)
-{
- const struct cgroupfs_root *root = cgrp->root;
- const struct cgroup_subsys *test_ss;
- BUG_ON(list_empty(&root->subsys_list));
- test_ss = list_entry(root->subsys_list.next,
- struct cgroup_subsys, sibling);
- if (css) {
- *css = cgrp->subsys[test_ss->subsys_id];
- BUG_ON(!*css);
- }
- if (subsys_id)
- *subsys_id = test_ss->subsys_id;
-}
-
/**
* cgroup_attach_task - attach task 'tsk' to cgroup 'cgrp'
* @cgrp: the cgroup the task is attaching to
struct css_set *cg;
struct css_set *newcg;
struct cgroupfs_root *root = cgrp->root;
- int subsys_id;
-
- get_first_subsys(cgrp, NULL, &subsys_id);
/* Nothing to do if the task is already in that cgroup */
- oldcgrp = task_cgroup(tsk, subsys_id);
+ oldcgrp = task_cgroup_from_root(tsk, root);
if (cgrp == oldcgrp)
return 0;
for_each_subsys(root, ss) {
if (ss->can_attach) {
- retval = ss->can_attach(ss, cgrp, tsk);
+ retval = ss->can_attach(ss, cgrp, tsk, false);
if (retval)
return retval;
}
for_each_subsys(root, ss) {
if (ss->attach)
- ss->attach(ss, cgrp, oldcgrp, tsk);
+ ss->attach(ss, cgrp, oldcgrp, tsk, false);
}
set_bit(CGRP_RELEASABLE, &oldcgrp->flags);
synchronize_rcu();
return ret;
}
-/* The various types of files and directories in a cgroup file system */
-enum cgroup_filetype {
- FILE_ROOT,
- FILE_DIR,
- FILE_TASKLIST,
- FILE_NOTIFY_ON_RELEASE,
- FILE_RELEASE_AGENT,
-};
-
/**
* cgroup_lock_live_group - take cgroup_mutex and check that cgrp is alive.
* @cgrp: the cgroup to be checked for liveness
return -EFAULT;
buffer[nbytes] = 0; /* nul-terminate */
- strstrip(buffer);
if (cft->write_u64) {
- u64 val = simple_strtoull(buffer, &end, 0);
+ u64 val = simple_strtoull(strstrip(buffer), &end, 0);
if (*end)
return -EINVAL;
retval = cft->write_u64(cgrp, cft, val);
} else {
- s64 val = simple_strtoll(buffer, &end, 0);
+ s64 val = simple_strtoll(strstrip(buffer), &end, 0);
if (*end)
return -EINVAL;
retval = cft->write_s64(cgrp, cft, val);
}
buffer[nbytes] = 0; /* nul-terminate */
- strstrip(buffer);
- retval = cft->write_string(cgrp, cft, buffer);
+ retval = cft->write_string(cgrp, cft, strstrip(buffer));
if (!retval)
retval = nbytes;
out:
return single_release(inode, file);
}
-static struct file_operations cgroup_seqfile_operations = {
+static const struct file_operations cgroup_seqfile_operations = {
.read = seq_read,
.write = cgroup_file_write,
.llseek = seq_lseek,
return simple_rename(old_dir, old_dentry, new_dir, new_dentry);
}
-static struct file_operations cgroup_file_operations = {
+static const struct file_operations cgroup_file_operations = {
.read = cgroup_file_read,
.write = cgroup_file_write,
.llseek = generic_file_llseek,
* the start of a css_set
*/
static void cgroup_advance_iter(struct cgroup *cgrp,
- struct cgroup_iter *it)
+ struct cgroup_iter *it)
{
struct list_head *l = it->cg_link;
struct cg_cgroup_link *link;
}
/*
- * Stuff for reading the 'tasks' file.
+ * Stuff for reading the 'tasks'/'procs' files.
*
* Reading this file can return large amounts of data if a cgroup has
* *lots* of attached tasks. So it may need several calls to read(),
*/
/*
- * Load into 'pidarray' up to 'npids' of the tasks using cgroup
- * 'cgrp'. Return actual number of pids loaded. No need to
- * task_lock(p) when reading out p->cgroup, since we're in an RCU
- * read section, so the css_set can't go away, and is
- * immutable after creation.
+ * The following two functions "fix" the issue where there are more pids
+ * than kmalloc will give memory for; in such cases, we use vmalloc/vfree.
+ * TODO: replace with a kernel-wide solution to this problem
+ */
+#define PIDLIST_TOO_LARGE(c) ((c) * sizeof(pid_t) > (PAGE_SIZE * 2))
+static void *pidlist_allocate(int count)
+{
+ if (PIDLIST_TOO_LARGE(count))
+ return vmalloc(count * sizeof(pid_t));
+ else
+ return kmalloc(count * sizeof(pid_t), GFP_KERNEL);
+}
+static void pidlist_free(void *p)
+{
+ if (is_vmalloc_addr(p))
+ vfree(p);
+ else
+ kfree(p);
+}
+static void *pidlist_resize(void *p, int newcount)
+{
+ void *newlist;
+ /* note: if new alloc fails, old p will still be valid either way */
+ if (is_vmalloc_addr(p)) {
+ newlist = vmalloc(newcount * sizeof(pid_t));
+ if (!newlist)
+ return NULL;
+ memcpy(newlist, p, newcount * sizeof(pid_t));
+ vfree(p);
+ } else {
+ newlist = krealloc(p, newcount * sizeof(pid_t), GFP_KERNEL);
+ }
+ return newlist;
+}
+
+/*
+ * pidlist_uniq - given a kmalloc()ed list, strip out all duplicate entries
+ * If the new stripped list is sufficiently smaller and there's enough memory
+ * to allocate a new buffer, will let go of the unneeded memory. Returns the
+ * number of unique elements.
+ */
+/* is the size difference enough that we should re-allocate the array? */
+#define PIDLIST_REALLOC_DIFFERENCE(old, new) ((old) - PAGE_SIZE >= (new))
+static int pidlist_uniq(pid_t **p, int length)
+{
+ int src, dest = 1;
+ pid_t *list = *p;
+ pid_t *newlist;
+
+ /*
+ * we presume the 0th element is unique, so i starts at 1. trivial
+ * edge cases first; no work needs to be done for either
+ */
+ if (length == 0 || length == 1)
+ return length;
+ /* src and dest walk down the list; dest counts unique elements */
+ for (src = 1; src < length; src++) {
+ /* find next unique element */
+ while (list[src] == list[src-1]) {
+ src++;
+ if (src == length)
+ goto after;
+ }
+ /* dest always points to where the next unique element goes */
+ list[dest] = list[src];
+ dest++;
+ }
+after:
+ /*
+ * if the length difference is large enough, we want to allocate a
+ * smaller buffer to save memory. if this fails due to out of memory,
+ * we'll just stay with what we've got.
+ */
+ if (PIDLIST_REALLOC_DIFFERENCE(length, dest)) {
+ newlist = pidlist_resize(list, dest);
+ if (newlist)
+ *p = newlist;
+ }
+ return dest;
+}
+
+static int cmppid(const void *a, const void *b)
+{
+ return *(pid_t *)a - *(pid_t *)b;
+}
+
+/*
+ * find the appropriate pidlist for our purpose (given procs vs tasks)
+ * returns with the lock on that pidlist already held, and takes care
+ * of the use count, or returns NULL with no locks held if we're out of
+ * memory.
*/
-static int pid_array_load(pid_t *pidarray, int npids, struct cgroup *cgrp)
+static struct cgroup_pidlist *cgroup_pidlist_find(struct cgroup *cgrp,
+ enum cgroup_filetype type)
{
- int n = 0, pid;
+ struct cgroup_pidlist *l;
+ /* don't need task_nsproxy() if we're looking at ourself */
+ struct pid_namespace *ns = get_pid_ns(current->nsproxy->pid_ns);
+ /*
+ * We can't drop the pidlist_mutex before taking the l->mutex in case
+ * the last ref-holder is trying to remove l from the list at the same
+ * time. Holding the pidlist_mutex precludes somebody taking whichever
+ * list we find out from under us - compare release_pid_array().
+ */
+ mutex_lock(&cgrp->pidlist_mutex);
+ list_for_each_entry(l, &cgrp->pidlists, links) {
+ if (l->key.type == type && l->key.ns == ns) {
+ /* found a matching list - drop the extra refcount */
+ put_pid_ns(ns);
+ /* make sure l doesn't vanish out from under us */
+ down_write(&l->mutex);
+ mutex_unlock(&cgrp->pidlist_mutex);
+ l->use_count++;
+ return l;
+ }
+ }
+ /* entry not found; create a new one */
+ l = kmalloc(sizeof(struct cgroup_pidlist), GFP_KERNEL);
+ if (!l) {
+ mutex_unlock(&cgrp->pidlist_mutex);
+ put_pid_ns(ns);
+ return l;
+ }
+ init_rwsem(&l->mutex);
+ down_write(&l->mutex);
+ l->key.type = type;
+ l->key.ns = ns;
+ l->use_count = 0; /* don't increment here */
+ l->list = NULL;
+ l->owner = cgrp;
+ list_add(&l->links, &cgrp->pidlists);
+ mutex_unlock(&cgrp->pidlist_mutex);
+ return l;
+}
+
+/*
+ * Load a cgroup's pidarray with either procs' tgids or tasks' pids
+ */
+static int pidlist_array_load(struct cgroup *cgrp, enum cgroup_filetype type,
+ struct cgroup_pidlist **lp)
+{
+ pid_t *array;
+ int length;
+ int pid, n = 0; /* used for populating the array */
struct cgroup_iter it;
struct task_struct *tsk;
+ struct cgroup_pidlist *l;
+
+ /*
+ * If cgroup gets more users after we read count, we won't have
+ * enough space - tough. This race is indistinguishable to the
+ * caller from the case that the additional cgroup users didn't
+ * show up until sometime later on.
+ */
+ length = cgroup_task_count(cgrp);
+ array = pidlist_allocate(length);
+ if (!array)
+ return -ENOMEM;
+ /* now, populate the array */
cgroup_iter_start(cgrp, &it);
while ((tsk = cgroup_iter_next(cgrp, &it))) {
- if (unlikely(n == npids))
+ if (unlikely(n == length))
break;
- pid = task_pid_vnr(tsk);
- if (pid > 0)
- pidarray[n++] = pid;
+ /* get tgid or pid for procs or tasks file respectively */
+ if (type == CGROUP_FILE_PROCS)
+ pid = task_tgid_vnr(tsk);
+ else
+ pid = task_pid_vnr(tsk);
+ if (pid > 0) /* make sure to only use valid results */
+ array[n++] = pid;
}
cgroup_iter_end(cgrp, &it);
- return n;
+ length = n;
+ /* now sort & (if procs) strip out duplicates */
+ sort(array, length, sizeof(pid_t), cmppid, NULL);
+ if (type == CGROUP_FILE_PROCS)
+ length = pidlist_uniq(&array, length);
+ l = cgroup_pidlist_find(cgrp, type);
+ if (!l) {
+ pidlist_free(array);
+ return -ENOMEM;
+ }
+ /* store array, freeing old if necessary - lock already held */
+ pidlist_free(l->list);
+ l->list = array;
+ l->length = length;
+ l->use_count++;
+ up_write(&l->mutex);
+ *lp = l;
+ return 0;
}
/**
return ret;
}
-/*
- * Cache pids for all threads in the same pid namespace that are
- * opening the same "tasks" file.
- */
-struct cgroup_pids {
- /* The node in cgrp->pids_list */
- struct list_head list;
- /* The cgroup those pids belong to */
- struct cgroup *cgrp;
- /* The namepsace those pids belong to */
- struct pid_namespace *ns;
- /* Array of process ids in the cgroup */
- pid_t *tasks_pids;
- /* How many files are using the this tasks_pids array */
- int use_count;
- /* Length of the current tasks_pids array */
- int length;
-};
-
-static int cmppid(const void *a, const void *b)
-{
- return *(pid_t *)a - *(pid_t *)b;
-}
/*
- * seq_file methods for the "tasks" file. The seq_file position is the
+ * seq_file methods for the tasks/procs files. The seq_file position is the
* next pid to display; the seq_file iterator is a pointer to the pid
- * in the cgroup->tasks_pids array.
+ * in the cgroup->l->list array.
*/
-static void *cgroup_tasks_start(struct seq_file *s, loff_t *pos)
+static void *cgroup_pidlist_start(struct seq_file *s, loff_t *pos)
{
/*
* Initially we receive a position value that corresponds to
* after a seek to the start). Use a binary-search to find the
* next pid to display, if any
*/
- struct cgroup_pids *cp = s->private;
- struct cgroup *cgrp = cp->cgrp;
+ struct cgroup_pidlist *l = s->private;
int index = 0, pid = *pos;
int *iter;
- down_read(&cgrp->pids_mutex);
+ down_read(&l->mutex);
if (pid) {
- int end = cp->length;
+ int end = l->length;
while (index < end) {
int mid = (index + end) / 2;
- if (cp->tasks_pids[mid] == pid) {
+ if (l->list[mid] == pid) {
index = mid;
break;
- } else if (cp->tasks_pids[mid] <= pid)
+ } else if (l->list[mid] <= pid)
index = mid + 1;
else
end = mid;
}
}
/* If we're off the end of the array, we're done */
- if (index >= cp->length)
+ if (index >= l->length)
return NULL;
/* Update the abstract position to be the actual pid that we found */
- iter = cp->tasks_pids + index;
+ iter = l->list + index;
*pos = *iter;
return iter;
}
-static void cgroup_tasks_stop(struct seq_file *s, void *v)
+static void cgroup_pidlist_stop(struct seq_file *s, void *v)
{
- struct cgroup_pids *cp = s->private;
- struct cgroup *cgrp = cp->cgrp;
- up_read(&cgrp->pids_mutex);
+ struct cgroup_pidlist *l = s->private;
+ up_read(&l->mutex);
}
-static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos)
+static void *cgroup_pidlist_next(struct seq_file *s, void *v, loff_t *pos)
{
- struct cgroup_pids *cp = s->private;
- int *p = v;
- int *end = cp->tasks_pids + cp->length;
-
+ struct cgroup_pidlist *l = s->private;
+ pid_t *p = v;
+ pid_t *end = l->list + l->length;
/*
* Advance to the next pid in the array. If this goes off the
* end, we're done
}
}
-static int cgroup_tasks_show(struct seq_file *s, void *v)
+static int cgroup_pidlist_show(struct seq_file *s, void *v)
{
return seq_printf(s, "%d\n", *(int *)v);
}
-static const struct seq_operations cgroup_tasks_seq_operations = {
- .start = cgroup_tasks_start,
- .stop = cgroup_tasks_stop,
- .next = cgroup_tasks_next,
- .show = cgroup_tasks_show,
+/*
+ * seq_operations functions for iterating on pidlists through seq_file -
+ * independent of whether it's tasks or procs
+ */
+static const struct seq_operations cgroup_pidlist_seq_operations = {
+ .start = cgroup_pidlist_start,
+ .stop = cgroup_pidlist_stop,
+ .next = cgroup_pidlist_next,
+ .show = cgroup_pidlist_show,
};
-static void release_cgroup_pid_array(struct cgroup_pids *cp)
+static void cgroup_release_pid_array(struct cgroup_pidlist *l)
{
- struct cgroup *cgrp = cp->cgrp;
-
- down_write(&cgrp->pids_mutex);
- BUG_ON(!cp->use_count);
- if (!--cp->use_count) {
- list_del(&cp->list);
- put_pid_ns(cp->ns);
- kfree(cp->tasks_pids);
- kfree(cp);
+ /*
+ * the case where we're the last user of this particular pidlist will
+ * have us remove it from the cgroup's list, which entails taking the
+ * mutex. since in pidlist_find the pidlist->lock depends on cgroup->
+ * pidlist_mutex, we have to take pidlist_mutex first.
+ */
+ mutex_lock(&l->owner->pidlist_mutex);
+ down_write(&l->mutex);
+ BUG_ON(!l->use_count);
+ if (!--l->use_count) {
+ /* we're the last user if refcount is 0; remove and free */
+ list_del(&l->links);
+ mutex_unlock(&l->owner->pidlist_mutex);
+ pidlist_free(l->list);
+ put_pid_ns(l->key.ns);
+ up_write(&l->mutex);
+ kfree(l);
+ return;
}
- up_write(&cgrp->pids_mutex);
+ mutex_unlock(&l->owner->pidlist_mutex);
+ up_write(&l->mutex);
}
-static int cgroup_tasks_release(struct inode *inode, struct file *file)
+static int cgroup_pidlist_release(struct inode *inode, struct file *file)
{
- struct seq_file *seq;
- struct cgroup_pids *cp;
-
+ struct cgroup_pidlist *l;
if (!(file->f_mode & FMODE_READ))
return 0;
-
- seq = file->private_data;
- cp = seq->private;
-
- release_cgroup_pid_array(cp);
+ /*
+ * the seq_file will only be initialized if the file was opened for
+ * reading; hence we check if it's not null only in that case.
+ */
+ l = ((struct seq_file *)file->private_data)->private;
+ cgroup_release_pid_array(l);
return seq_release(inode, file);
}
-static struct file_operations cgroup_tasks_operations = {
+static const struct file_operations cgroup_pidlist_operations = {
.read = seq_read,
.llseek = seq_lseek,
.write = cgroup_file_write,
- .release = cgroup_tasks_release,
+ .release = cgroup_pidlist_release,
};
/*
- * Handle an open on 'tasks' file. Prepare an array containing the
- * process id's of tasks currently attached to the cgroup being opened.
+ * The following functions handle opens on a file that displays a pidlist
+ * (tasks or procs). Prepare an array of the process/thread IDs of whoever's
+ * in the cgroup.
*/
-
-static int cgroup_tasks_open(struct inode *unused, struct file *file)
+/* helper function for the two below it */
+static int cgroup_pidlist_open(struct file *file, enum cgroup_filetype type)
{
struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
- struct pid_namespace *ns = current->nsproxy->pid_ns;
- struct cgroup_pids *cp;
- pid_t *pidarray;
- int npids;
+ struct cgroup_pidlist *l;
int retval;
/* Nothing to do for write-only files */
if (!(file->f_mode & FMODE_READ))
return 0;
- /*
- * If cgroup gets more users after we read count, we won't have
- * enough space - tough. This race is indistinguishable to the
- * caller from the case that the additional cgroup users didn't
- * show up until sometime later on.
- */
- npids = cgroup_task_count(cgrp);
- pidarray = kmalloc(npids * sizeof(pid_t), GFP_KERNEL);
- if (!pidarray)
- return -ENOMEM;
- npids = pid_array_load(pidarray, npids, cgrp);
- sort(pidarray, npids, sizeof(pid_t), cmppid, NULL);
-
- /*
- * Store the array in the cgroup, freeing the old
- * array if necessary
- */
- down_write(&cgrp->pids_mutex);
-
- list_for_each_entry(cp, &cgrp->pids_list, list) {
- if (ns == cp->ns)
- goto found;
- }
-
- cp = kzalloc(sizeof(*cp), GFP_KERNEL);
- if (!cp) {
- up_write(&cgrp->pids_mutex);
- kfree(pidarray);
- return -ENOMEM;
- }
- cp->cgrp = cgrp;
- cp->ns = ns;
- get_pid_ns(ns);
- list_add(&cp->list, &cgrp->pids_list);
-found:
- kfree(cp->tasks_pids);
- cp->tasks_pids = pidarray;
- cp->length = npids;
- cp->use_count++;
- up_write(&cgrp->pids_mutex);
-
- file->f_op = &cgroup_tasks_operations;
+ /* have the array populated */
+ retval = pidlist_array_load(cgrp, type, &l);
+ if (retval)
+ return retval;
+ /* configure file information */
+ file->f_op = &cgroup_pidlist_operations;
- retval = seq_open(file, &cgroup_tasks_seq_operations);
+ retval = seq_open(file, &cgroup_pidlist_seq_operations);
if (retval) {
- release_cgroup_pid_array(cp);
+ cgroup_release_pid_array(l);
return retval;
}
- ((struct seq_file *)file->private_data)->private = cp;
+ ((struct seq_file *)file->private_data)->private = l;
return 0;
}
+static int cgroup_tasks_open(struct inode *unused, struct file *file)
+{
+ return cgroup_pidlist_open(file, CGROUP_FILE_TASKS);
+}
+static int cgroup_procs_open(struct inode *unused, struct file *file)
+{
+ return cgroup_pidlist_open(file, CGROUP_FILE_PROCS);
+}
static u64 cgroup_read_notify_on_release(struct cgroup *cgrp,
struct cftype *cft)
/*
* for the common functions, 'private' gives the type of file
*/
+/* for hysterical raisins, we can't put this on the older files */
+#define CGROUP_FILE_GENERIC_PREFIX "cgroup."
static struct cftype files[] = {
{
.name = "tasks",
.open = cgroup_tasks_open,
.write_u64 = cgroup_tasks_write,
- .release = cgroup_tasks_release,
- .private = FILE_TASKLIST,
+ .release = cgroup_pidlist_release,
.mode = S_IRUGO | S_IWUSR,
},
-
+ {
+ .name = CGROUP_FILE_GENERIC_PREFIX "procs",
+ .open = cgroup_procs_open,
+ /* .write_u64 = cgroup_procs_write, TODO */
+ .release = cgroup_pidlist_release,
+ .mode = S_IRUGO,
+ },
{
.name = "notify_on_release",
.read_u64 = cgroup_read_notify_on_release,
.write_u64 = cgroup_write_notify_on_release,
- .private = FILE_NOTIFY_ON_RELEASE,
},
};
.read_seq_string = cgroup_release_agent_show,
.write_string = cgroup_release_agent_write,
.max_write_len = PATH_MAX,
- .private = FILE_RELEASE_AGENT,
};
static int cgroup_populate_dir(struct cgroup *cgrp)
init_task.cgroups = &init_css_set;
init_css_set_link.cg = &init_css_set;
+ init_css_set_link.cgrp = dummytop;
list_add(&init_css_set_link.cgrp_link_list,
&rootnode.top_cgroup.css_sets);
list_add(&init_css_set_link.cg_link_list,
/* Add init_css_set to the hash table */
hhead = css_set_hash(init_css_set.subsys);
hlist_add_head(&init_css_set.hlist, hhead);
-
+ BUG_ON(!init_root_id(&rootnode));
err = register_filesystem(&cgroup_fs_type);
if (err < 0)
goto out;
for_each_active_root(root) {
struct cgroup_subsys *ss;
struct cgroup *cgrp;
- int subsys_id;
int count = 0;
- seq_printf(m, "%lu:", root->subsys_bits);
+ seq_printf(m, "%d:", root->hierarchy_id);
for_each_subsys(root, ss)
seq_printf(m, "%s%s", count++ ? "," : "", ss->name);
+ if (strlen(root->name))
+ seq_printf(m, "%sname=%s", count ? "," : "",
+ root->name);
seq_putc(m, ':');
- get_first_subsys(&root->top_cgroup, NULL, &subsys_id);
- cgrp = task_cgroup(tsk, subsys_id);
+ cgrp = task_cgroup_from_root(tsk, root);
retval = cgroup_path(cgrp, buf, PAGE_SIZE);
if (retval < 0)
goto out_unlock;
return single_open(file, proc_cgroup_show, pid);
}
-struct file_operations proc_cgroup_operations = {
+const struct file_operations proc_cgroup_operations = {
.open = cgroup_open,
.read = seq_read,
.llseek = seq_lseek,
mutex_lock(&cgroup_mutex);
for (i = 0; i < CGROUP_SUBSYS_COUNT; i++) {
struct cgroup_subsys *ss = subsys[i];
- seq_printf(m, "%s\t%lu\t%d\t%d\n",
- ss->name, ss->root->subsys_bits,
+ seq_printf(m, "%s\t%d\t%d\t%d\n",
+ ss->name, ss->root->hierarchy_id,
ss->root->number_of_cgroups, !ss->disabled);
}
mutex_unlock(&cgroup_mutex);
return single_open(file, proc_cgroupstats_show, NULL);
}
-static struct file_operations proc_cgroupstats_operations = {
+static const struct file_operations proc_cgroupstats_operations = {
.open = cgroupstats_open,
.read = seq_read,
.llseek = seq_lseek,
{
int ret;
struct cgroup *target;
- int subsys_id;
if (cgrp == dummytop)
return 1;
- get_first_subsys(cgrp, NULL, &subsys_id);
- target = task_cgroup(task, subsys_id);
+ target = task_cgroup_from_root(task, cgrp->root);
while (cgrp != target && cgrp!= cgrp->top_cgroup)
cgrp = cgrp->parent;
ret = (cgrp == target);
void __css_put(struct cgroup_subsys_state *css)
{
struct cgroup *cgrp = css->cgroup;
+ int val;
rcu_read_lock();
- if (atomic_dec_return(&css->refcnt) == 1) {
+ val = atomic_dec_return(&css->refcnt);
+ if (val == 1) {
if (notify_on_release(cgrp)) {
set_bit(CGRP_RELEASABLE, &cgrp->flags);
check_for_release(cgrp);
cgroup_wakeup_rmdir_waiter(cgrp);
}
rcu_read_unlock();
+ WARN_ON_ONCE(val < 1);
}
/*
return ret;
}
+#ifdef CONFIG_CGROUP_DEBUG
+static struct cgroup_subsys_state *debug_create(struct cgroup_subsys *ss,
+ struct cgroup *cont)
+{
+ struct cgroup_subsys_state *css = kzalloc(sizeof(*css), GFP_KERNEL);
+
+ if (!css)
+ return ERR_PTR(-ENOMEM);
+
+ return css;
+}
+
+static void debug_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
+{
+ kfree(cont->subsys[debug_subsys_id]);
+}
+
+static u64 cgroup_refcount_read(struct cgroup *cont, struct cftype *cft)
+{
+ return atomic_read(&cont->count);
+}
+
+static u64 debug_taskcount_read(struct cgroup *cont, struct cftype *cft)
+{
+ return cgroup_task_count(cont);
+}
+
+static u64 current_css_set_read(struct cgroup *cont, struct cftype *cft)
+{
+ return (u64)(unsigned long)current->cgroups;
+}
+
+static u64 current_css_set_refcount_read(struct cgroup *cont,
+ struct cftype *cft)
+{
+ u64 count;
+
+ rcu_read_lock();
+ count = atomic_read(¤t->cgroups->refcount);
+ rcu_read_unlock();
+ return count;
+}
+
+static int current_css_set_cg_links_read(struct cgroup *cont,
+ struct cftype *cft,
+ struct seq_file *seq)
+{
+ struct cg_cgroup_link *link;
+ struct css_set *cg;
+
+ read_lock(&css_set_lock);
+ rcu_read_lock();
+ cg = rcu_dereference(current->cgroups);
+ list_for_each_entry(link, &cg->cg_links, cg_link_list) {
+ struct cgroup *c = link->cgrp;
+ const char *name;
+
+ if (c->dentry)
+ name = c->dentry->d_name.name;
+ else
+ name = "?";
+ seq_printf(seq, "Root %d group %s\n",
+ c->root->hierarchy_id, name);
+ }
+ rcu_read_unlock();
+ read_unlock(&css_set_lock);
+ return 0;
+}
+
+#define MAX_TASKS_SHOWN_PER_CSS 25
+static int cgroup_css_links_read(struct cgroup *cont,
+ struct cftype *cft,
+ struct seq_file *seq)
+{
+ struct cg_cgroup_link *link;
+
+ read_lock(&css_set_lock);
+ list_for_each_entry(link, &cont->css_sets, cgrp_link_list) {
+ struct css_set *cg = link->cg;
+ struct task_struct *task;
+ int count = 0;
+ seq_printf(seq, "css_set %p\n", cg);
+ list_for_each_entry(task, &cg->tasks, cg_list) {
+ if (count++ > MAX_TASKS_SHOWN_PER_CSS) {
+ seq_puts(seq, " ...\n");
+ break;
+ } else {
+ seq_printf(seq, " task %d\n",
+ task_pid_vnr(task));
+ }
+ }
+ }
+ read_unlock(&css_set_lock);
+ return 0;
+}
+
+static u64 releasable_read(struct cgroup *cgrp, struct cftype *cft)
+{
+ return test_bit(CGRP_RELEASABLE, &cgrp->flags);
+}
+
+static struct cftype debug_files[] = {
+ {
+ .name = "cgroup_refcount",
+ .read_u64 = cgroup_refcount_read,
+ },
+ {
+ .name = "taskcount",
+ .read_u64 = debug_taskcount_read,
+ },
+
+ {
+ .name = "current_css_set",
+ .read_u64 = current_css_set_read,
+ },
+
+ {
+ .name = "current_css_set_refcount",
+ .read_u64 = current_css_set_refcount_read,
+ },
+
+ {
+ .name = "current_css_set_cg_links",
+ .read_seq_string = current_css_set_cg_links_read,
+ },
+
+ {
+ .name = "cgroup_css_links",
+ .read_seq_string = cgroup_css_links_read,
+ },
+
+ {
+ .name = "releasable",
+ .read_u64 = releasable_read,
+ },
+};
+
+static int debug_populate(struct cgroup_subsys *ss, struct cgroup *cont)
+{
+ return cgroup_add_files(cont, ss, debug_files,
+ ARRAY_SIZE(debug_files));
+}
+
+struct cgroup_subsys debug_subsys = {
+ .name = "debug",
+ .create = debug_create,
+ .destroy = debug_destroy,
+ .populate = debug_populate,
+ .subsys_id = debug_subsys_id,
+};
+#endif /* CONFIG_CGROUP_DEBUG */
+++ /dev/null
-/*
- * kernel/cgroup_debug.c - Example cgroup subsystem that
- * exposes debug info
- *
- * Copyright (C) Google Inc, 2007
- *
- * Developed by Paul Menage (menage@google.com)
- *
- */
-
-#include <linux/cgroup.h>
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/rcupdate.h>
-
-#include <asm/atomic.h>
-
-static struct cgroup_subsys_state *debug_create(struct cgroup_subsys *ss,
- struct cgroup *cont)
-{
- struct cgroup_subsys_state *css = kzalloc(sizeof(*css), GFP_KERNEL);
-
- if (!css)
- return ERR_PTR(-ENOMEM);
-
- return css;
-}
-
-static void debug_destroy(struct cgroup_subsys *ss, struct cgroup *cont)
-{
- kfree(cont->subsys[debug_subsys_id]);
-}
-
-static u64 cgroup_refcount_read(struct cgroup *cont, struct cftype *cft)
-{
- return atomic_read(&cont->count);
-}
-
-static u64 taskcount_read(struct cgroup *cont, struct cftype *cft)
-{
- u64 count;
-
- count = cgroup_task_count(cont);
- return count;
-}
-
-static u64 current_css_set_read(struct cgroup *cont, struct cftype *cft)
-{
- return (u64)(long)current->cgroups;
-}
-
-static u64 current_css_set_refcount_read(struct cgroup *cont,
- struct cftype *cft)
-{
- u64 count;
-
- rcu_read_lock();
- count = atomic_read(¤t->cgroups->refcount);
- rcu_read_unlock();
- return count;
-}
-
-static u64 releasable_read(struct cgroup *cgrp, struct cftype *cft)
-{
- return test_bit(CGRP_RELEASABLE, &cgrp->flags);
-}
-
-static struct cftype files[] = {
- {
- .name = "cgroup_refcount",
- .read_u64 = cgroup_refcount_read,
- },
- {
- .name = "taskcount",
- .read_u64 = taskcount_read,
- },
-
- {
- .name = "current_css_set",
- .read_u64 = current_css_set_read,
- },
-
- {
- .name = "current_css_set_refcount",
- .read_u64 = current_css_set_refcount_read,
- },
-
- {
- .name = "releasable",
- .read_u64 = releasable_read,
- },
-};
-
-static int debug_populate(struct cgroup_subsys *ss, struct cgroup *cont)
-{
- return cgroup_add_files(cont, ss, files, ARRAY_SIZE(files));
-}
-
-struct cgroup_subsys debug_subsys = {
- .name = "debug",
- .create = debug_create,
- .destroy = debug_destroy,
- .populate = debug_populate,
- .subsys_id = debug_subsys_id,
-};
*/
static int freezer_can_attach(struct cgroup_subsys *ss,
struct cgroup *new_cgroup,
- struct task_struct *task)
+ struct task_struct *task, bool threadgroup)
{
struct freezer *freezer;
if (freezer->state == CGROUP_FROZEN)
return -EBUSY;
+ if (threadgroup) {
+ struct task_struct *c;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &task->thread_group, thread_group) {
+ if (is_task_frozen_enough(c)) {
+ rcu_read_unlock();
+ return -EBUSY;
+ }
+ }
+ rcu_read_unlock();
+ }
+
return 0;
}
static cpumask_var_t cpus_attach;
/* Called by cgroups to determine if a cpuset is usable; cgroup_mutex held */
-static int cpuset_can_attach(struct cgroup_subsys *ss,
- struct cgroup *cont, struct task_struct *tsk)
+static int cpuset_can_attach(struct cgroup_subsys *ss, struct cgroup *cont,
+ struct task_struct *tsk, bool threadgroup)
{
+ int ret;
struct cpuset *cs = cgroup_cs(cont);
if (cpumask_empty(cs->cpus_allowed) || nodes_empty(cs->mems_allowed))
if (tsk->flags & PF_THREAD_BOUND)
return -EINVAL;
- return security_task_setscheduler(tsk, 0, NULL);
+ ret = security_task_setscheduler(tsk, 0, NULL);
+ if (ret)
+ return ret;
+ if (threadgroup) {
+ struct task_struct *c;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
+ ret = security_task_setscheduler(c, 0, NULL);
+ if (ret) {
+ rcu_read_unlock();
+ return ret;
+ }
+ }
+ rcu_read_unlock();
+ }
+ return 0;
+}
+
+static void cpuset_attach_task(struct task_struct *tsk, nodemask_t *to,
+ struct cpuset *cs)
+{
+ int err;
+ /*
+ * can_attach beforehand should guarantee that this doesn't fail.
+ * TODO: have a better way to handle failure here
+ */
+ err = set_cpus_allowed_ptr(tsk, cpus_attach);
+ WARN_ON_ONCE(err);
+
+ task_lock(tsk);
+ cpuset_change_task_nodemask(tsk, to);
+ task_unlock(tsk);
+ cpuset_update_task_spread_flag(cs, tsk);
+
}
-static void cpuset_attach(struct cgroup_subsys *ss,
- struct cgroup *cont, struct cgroup *oldcont,
- struct task_struct *tsk)
+static void cpuset_attach(struct cgroup_subsys *ss, struct cgroup *cont,
+ struct cgroup *oldcont, struct task_struct *tsk,
+ bool threadgroup)
{
nodemask_t from, to;
struct mm_struct *mm;
struct cpuset *cs = cgroup_cs(cont);
struct cpuset *oldcs = cgroup_cs(oldcont);
- int err;
if (cs == &top_cpuset) {
cpumask_copy(cpus_attach, cpu_possible_mask);
guarantee_online_cpus(cs, cpus_attach);
guarantee_online_mems(cs, &to);
}
- err = set_cpus_allowed_ptr(tsk, cpus_attach);
- if (err)
- return;
- task_lock(tsk);
- cpuset_change_task_nodemask(tsk, &to);
- task_unlock(tsk);
- cpuset_update_task_spread_flag(cs, tsk);
+ /* do per-task migration stuff possibly for each in the threadgroup */
+ cpuset_attach_task(tsk, &to, cs);
+ if (threadgroup) {
+ struct task_struct *c;
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
+ cpuset_attach_task(c, &to, cs);
+ }
+ rcu_read_unlock();
+ }
+ /* change mm; only needs to be done once even if threadgroup */
from = oldcs->mems_allowed;
to = cs->mems_allowed;
mm = get_task_mm(tsk);
#ifdef CONFIG_DEBUG_CREDENTIALS
+bool creds_are_invalid(const struct cred *cred)
+{
+ if (cred->magic != CRED_MAGIC)
+ return true;
+ if (atomic_read(&cred->usage) < atomic_read(&cred->subscribers))
+ return true;
+#ifdef CONFIG_SECURITY_SELINUX
+ if (selinux_is_enabled()) {
+ if ((unsigned long) cred->security < PAGE_SIZE)
+ return true;
+ if ((*(u32 *)cred->security & 0xffffff00) ==
+ (POISON_FREE << 24 | POISON_FREE << 16 | POISON_FREE << 8))
+ return true;
+ }
+#endif
+ return false;
+}
+EXPORT_SYMBOL(creds_are_invalid);
+
/*
* dump invalid credentials
*/
{
struct task_struct *curr = current->group_leader;
- if (task_session(curr) != pid) {
+ if (task_session(curr) != pid)
change_pid(curr, PIDTYPE_SID, pid);
- proc_sid_connector(curr);
- }
if (task_pgrp(curr) != pid)
change_pid(curr, PIDTYPE_PGID, pid);
disassociate_ctty(1);
module_put(task_thread_info(tsk)->exec_domain->module);
- if (tsk->binfmt)
- module_put(tsk->binfmt->module);
proc_exit_connector(tsk);
tsk->mempolicy = NULL;
#endif
#ifdef CONFIG_FUTEX
- if (unlikely(!list_empty(&tsk->pi_state_list)))
- exit_pi_state_list(tsk);
if (unlikely(current->pi_state_cache))
kfree(current->pi_state_cache);
#endif
int __user *wo_stat;
struct rusage __user *wo_rusage;
+ wait_queue_t child_wait;
int notask_error;
};
-static struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
+static inline
+struct pid *task_pid_type(struct task_struct *task, enum pid_type type)
{
- struct pid *pid = NULL;
- if (type == PIDTYPE_PID)
- pid = task->pids[type].pid;
- else if (type < PIDTYPE_MAX)
- pid = task->group_leader->pids[type].pid;
- return pid;
+ if (type != PIDTYPE_PID)
+ task = task->group_leader;
+ return task->pids[type].pid;
}
-static int eligible_child(struct wait_opts *wo, struct task_struct *p)
+static int eligible_pid(struct wait_opts *wo, struct task_struct *p)
{
- int err;
-
- if (wo->wo_type < PIDTYPE_MAX) {
- if (task_pid_type(p, wo->wo_type) != wo->wo_pid)
- return 0;
- }
+ return wo->wo_type == PIDTYPE_MAX ||
+ task_pid_type(p, wo->wo_type) == wo->wo_pid;
+}
+static int eligible_child(struct wait_opts *wo, struct task_struct *p)
+{
+ if (!eligible_pid(wo, p))
+ return 0;
/* Wait for all children (clone and not) if __WALL is set;
* otherwise, wait for clone children *only* if __WCLONE is
* set; otherwise, wait for non-clone children *only*. (Note:
&& !(wo->wo_flags & __WALL))
return 0;
- err = security_task_wait(p);
- if (err)
- return err;
-
return 1;
}
put_task_struct(p);
infop = wo->wo_info;
- if (!retval)
- retval = put_user(SIGCHLD, &infop->si_signo);
- if (!retval)
- retval = put_user(0, &infop->si_errno);
- if (!retval)
- retval = put_user((short)why, &infop->si_code);
- if (!retval)
- retval = put_user(pid, &infop->si_pid);
- if (!retval)
- retval = put_user(uid, &infop->si_uid);
- if (!retval)
- retval = put_user(status, &infop->si_status);
+ if (infop) {
+ if (!retval)
+ retval = put_user(SIGCHLD, &infop->si_signo);
+ if (!retval)
+ retval = put_user(0, &infop->si_errno);
+ if (!retval)
+ retval = put_user((short)why, &infop->si_code);
+ if (!retval)
+ retval = put_user(pid, &infop->si_pid);
+ if (!retval)
+ retval = put_user(uid, &infop->si_uid);
+ if (!retval)
+ retval = put_user(status, &infop->si_status);
+ }
if (!retval)
retval = pid;
return retval;
* then ->notask_error is 0 if @p is an eligible child,
* or another error from security_task_wait(), or still -ECHILD.
*/
-static int wait_consider_task(struct wait_opts *wo, struct task_struct *parent,
- int ptrace, struct task_struct *p)
+static int wait_consider_task(struct wait_opts *wo, int ptrace,
+ struct task_struct *p)
{
int ret = eligible_child(wo, p);
if (!ret)
return ret;
+ ret = security_task_wait(p);
if (unlikely(ret < 0)) {
/*
* If we have not yet seen any eligible child,
* Do not consider detached threads.
*/
if (!task_detached(p)) {
- int ret = wait_consider_task(wo, tsk, 0, p);
+ int ret = wait_consider_task(wo, 0, p);
if (ret)
return ret;
}
struct task_struct *p;
list_for_each_entry(p, &tsk->ptraced, ptrace_entry) {
- int ret = wait_consider_task(wo, tsk, 1, p);
+ int ret = wait_consider_task(wo, 1, p);
if (ret)
return ret;
}
return 0;
}
+static int child_wait_callback(wait_queue_t *wait, unsigned mode,
+ int sync, void *key)
+{
+ struct wait_opts *wo = container_of(wait, struct wait_opts,
+ child_wait);
+ struct task_struct *p = key;
+
+ if (!eligible_pid(wo, p))
+ return 0;
+
+ if ((wo->wo_flags & __WNOTHREAD) && wait->private != p->parent)
+ return 0;
+
+ return default_wake_function(wait, mode, sync, key);
+}
+
+void __wake_up_parent(struct task_struct *p, struct task_struct *parent)
+{
+ __wake_up_sync_key(&parent->signal->wait_chldexit,
+ TASK_INTERRUPTIBLE, 1, p);
+}
+
static long do_wait(struct wait_opts *wo)
{
- DECLARE_WAITQUEUE(wait, current);
struct task_struct *tsk;
int retval;
trace_sched_process_wait(wo->wo_pid);
- add_wait_queue(¤t->signal->wait_chldexit,&wait);
+ init_waitqueue_func_entry(&wo->child_wait, child_wait_callback);
+ wo->child_wait.private = current;
+ add_wait_queue(¤t->signal->wait_chldexit, &wo->child_wait);
repeat:
/*
* If there is nothing that can match our critiera just get out.
}
end:
__set_current_state(TASK_RUNNING);
- remove_wait_queue(¤t->signal->wait_chldexit,&wait);
- if (wo->wo_info) {
- struct siginfo __user *infop = wo->wo_info;
-
- if (retval > 0)
- retval = 0;
- else {
- /*
- * For a WNOHANG return, clear out all the fields
- * we would set so the user can easily tell the
- * difference.
- */
- if (!retval)
- retval = put_user(0, &infop->si_signo);
- if (!retval)
- retval = put_user(0, &infop->si_errno);
- if (!retval)
- retval = put_user(0, &infop->si_code);
- if (!retval)
- retval = put_user(0, &infop->si_pid);
- if (!retval)
- retval = put_user(0, &infop->si_uid);
- if (!retval)
- retval = put_user(0, &infop->si_status);
- }
- }
+ remove_wait_queue(¤t->signal->wait_chldexit, &wo->child_wait);
return retval;
}
wo.wo_stat = NULL;
wo.wo_rusage = ru;
ret = do_wait(&wo);
+
+ if (ret > 0) {
+ ret = 0;
+ } else if (infop) {
+ /*
+ * For a WNOHANG return, clear out all the fields
+ * we would set so the user can easily tell the
+ * difference.
+ */
+ if (!ret)
+ ret = put_user(0, &infop->si_signo);
+ if (!ret)
+ ret = put_user(0, &infop->si_errno);
+ if (!ret)
+ ret = put_user(0, &infop->si_code);
+ if (!ret)
+ ret = put_user(0, &infop->si_pid);
+ if (!ret)
+ ret = put_user(0, &infop->si_uid);
+ if (!ret)
+ ret = put_user(0, &infop->si_status);
+ }
+
put_pid(pid);
/* avoid REGPARM breakage on x86: */
int cpu;
int total = 0;
- for_each_online_cpu(cpu)
+ for_each_possible_cpu(cpu)
total += per_cpu(process_counts, cpu);
return total;
#include <linux/init_task.h>
+static void mm_init_aio(struct mm_struct *mm)
+{
+#ifdef CONFIG_AIO
+ spin_lock_init(&mm->ioctx_lock);
+ INIT_HLIST_HEAD(&mm->ioctx_list);
+#endif
+}
+
static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p)
{
atomic_set(&mm->mm_users, 1);
set_mm_counter(mm, file_rss, 0);
set_mm_counter(mm, anon_rss, 0);
spin_lock_init(&mm->page_table_lock);
- spin_lock_init(&mm->ioctx_lock);
- INIT_HLIST_HEAD(&mm->ioctx_list);
mm->free_area_cache = TASK_UNMAPPED_BASE;
mm->cached_hole_size = ~0UL;
+ mm_init_aio(mm);
mm_init_owner(mm, p);
if (likely(!mm_alloc_pgd(mm))) {
spin_unlock(&mmlist_lock);
}
put_swap_token(mm);
+ if (mm->binfmt)
+ module_put(mm->binfmt->module);
mmdrop(mm);
}
}
/* Get rid of any futexes when releasing the mm */
#ifdef CONFIG_FUTEX
- if (unlikely(tsk->robust_list))
+ if (unlikely(tsk->robust_list)) {
exit_robust_list(tsk);
+ tsk->robust_list = NULL;
+ }
#ifdef CONFIG_COMPAT
- if (unlikely(tsk->compat_robust_list))
+ if (unlikely(tsk->compat_robust_list)) {
compat_exit_robust_list(tsk);
+ tsk->compat_robust_list = NULL;
+ }
#endif
+ if (unlikely(!list_empty(&tsk->pi_state_list)))
+ exit_pi_state_list(tsk);
#endif
/* Get rid of any cached register state */
mm->hiwater_rss = get_mm_rss(mm);
mm->hiwater_vm = mm->total_vm;
+ if (mm->binfmt && !try_module_get(mm->binfmt->module))
+ goto free_pt;
+
return mm;
free_pt:
+ /* don't put binfmt in mmput, we haven't got module yet */
+ mm->binfmt = NULL;
mmput(mm);
fail_nomem:
if ((clone_flags & CLONE_SIGHAND) && !(clone_flags & CLONE_VM))
return ERR_PTR(-EINVAL);
+ /*
+ * Siblings of global init remain as zombies on exit since they are
+ * not reaped by their parent (swapper). To solve this and to avoid
+ * multi-rooted process trees, prevent global and container-inits
+ * from creating siblings.
+ */
+ if ((clone_flags & CLONE_PARENT) &&
+ current->signal->flags & SIGNAL_UNKILLABLE)
+ return ERR_PTR(-EINVAL);
+
retval = security_task_create(clone_flags);
if (retval)
goto fork_out;
if (!try_module_get(task_thread_info(p)->exec_domain->module))
goto bad_fork_cleanup_count;
- if (p->binfmt && !try_module_get(p->binfmt->module))
- goto bad_fork_cleanup_put_domain;
-
p->did_exec = 0;
delayacct_tsk_init(p); /* Must remain after dup_task_struct() */
copy_flags(clone_flags, p);
#endif
cgroup_exit(p, cgroup_callbacks_done);
delayacct_tsk_free(p);
- if (p->binfmt)
- module_put(p->binfmt->module);
-bad_fork_cleanup_put_domain:
module_put(task_thread_info(p)->exec_domain->module);
bad_fork_cleanup_count:
atomic_dec(&p->cred->user->processes);
union futex_key key;
};
-/*
- * We use this hashed waitqueue instead of a normal wait_queue_t, so
+/**
+ * struct futex_q - The hashed futex queue entry, one per waiting task
+ * @task: the task waiting on the futex
+ * @lock_ptr: the hash bucket lock
+ * @key: the key the futex is hashed on
+ * @pi_state: optional priority inheritance state
+ * @rt_waiter: rt_waiter storage for use with requeue_pi
+ * @requeue_pi_key: the requeue_pi target futex key
+ * @bitset: bitset for the optional bitmasked wakeup
+ *
+ * We use this hashed waitqueue, instead of a normal wait_queue_t, so
* we can wake only the relevant ones (hashed queues may be shared).
*
* A futex_q has a woken state, just like tasks have TASK_RUNNING.
* It is considered woken when plist_node_empty(&q->list) || q->lock_ptr == 0.
* The order of wakup is always to make the first condition true, then
- * wake up q->waiter, then make the second condition true.
+ * the second.
+ *
+ * PI futexes are typically woken before they are removed from the hash list via
+ * the rt_mutex code. See unqueue_me_pi().
*/
struct futex_q {
struct plist_node list;
- /* Waiter reference */
- struct task_struct *task;
- /* Which hash list lock to use: */
+ struct task_struct *task;
spinlock_t *lock_ptr;
-
- /* Key which the futex is hashed on: */
union futex_key key;
-
- /* Optional priority inheritance state: */
struct futex_pi_state *pi_state;
-
- /* rt_waiter storage for requeue_pi: */
struct rt_mutex_waiter *rt_waiter;
-
- /* The expected requeue pi target futex key: */
union futex_key *requeue_pi_key;
-
- /* Bitset for the optional bitmasked wakeup */
u32 bitset;
};
*/
static inline int match_futex(union futex_key *key1, union futex_key *key2)
{
- return (key1->both.word == key2->both.word
+ return (key1 && key2
+ && key1->both.word == key2->both.word
&& key1->both.ptr == key2->both.ptr
&& key1->both.offset == key2->both.offset);
}
}
/**
- * get_futex_key - Get parameters which are the keys for a futex.
- * @uaddr: virtual address of the futex
- * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
- * @key: address where result is stored.
- * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE)
+ * get_futex_key() - Get parameters which are the keys for a futex
+ * @uaddr: virtual address of the futex
+ * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
+ * @key: address where result is stored.
+ * @rw: mapping needs to be read/write (values: VERIFY_READ,
+ * VERIFY_WRITE)
*
* Returns a negative error code or 0
* The key words are stored in *key on success.
drop_futex_key_refs(key);
}
-/*
- * fault_in_user_writeable - fault in user address and verify RW access
+/**
+ * fault_in_user_writeable() - Fault in user address and verify RW access
* @uaddr: pointer to faulting user space address
*
* Slow path to fixup the fault we just took in the atomic write
/**
* futex_top_waiter() - Return the highest priority waiter on a futex
- * @hb: the hash bucket the futex_q's reside in
- * @key: the futex key (to distinguish it from other futex futex_q's)
+ * @hb: the hash bucket the futex_q's reside in
+ * @key: the futex key (to distinguish it from other futex futex_q's)
*
* Must be called with the hb lock held.
*/
}
/**
- * futex_lock_pi_atomic() - atomic work required to acquire a pi aware futex
+ * futex_lock_pi_atomic() - Atomic work required to acquire a pi aware futex
* @uaddr: the pi futex user address
* @hb: the pi futex hash bucket
* @key: the futex key associated with uaddr and hb
hb1 = hash_futex(&key1);
hb2 = hash_futex(&key2);
- double_lock_hb(hb1, hb2);
retry_private:
+ double_lock_hb(hb1, hb2);
op_ret = futex_atomic_op_inuser(op, uaddr2);
if (unlikely(op_ret < 0)) {
/**
* requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue
- * q: the futex_q
- * key: the key of the requeue target futex
- * hb: the hash_bucket of the requeue target futex
+ * @q: the futex_q
+ * @key: the key of the requeue target futex
+ * @hb: the hash_bucket of the requeue target futex
*
* During futex_requeue, with requeue_pi=1, it is possible to acquire the
* target futex if it is uncontended or via a lock steal. Set the futex_q key
void requeue_pi_wake_futex(struct futex_q *q, union futex_key *key,
struct futex_hash_bucket *hb)
{
- drop_futex_key_refs(&q->key);
get_futex_key_refs(key);
q->key = *key;
*/
if (ret == 1) {
WARN_ON(pi_state);
+ drop_count++;
task_count++;
ret = get_futex_value_locked(&curval2, uaddr2);
if (!ret)
if (ret == 1) {
/* We got the lock. */
requeue_pi_wake_futex(this, &key2, hb2);
+ drop_count++;
continue;
} else if (ret) {
/* -EDEADLK */
return hb;
}
+static inline void
+queue_unlock(struct futex_q *q, struct futex_hash_bucket *hb)
+{
+ spin_unlock(&hb->lock);
+ drop_futex_key_refs(&q->key);
+}
+
+/**
+ * queue_me() - Enqueue the futex_q on the futex_hash_bucket
+ * @q: The futex_q to enqueue
+ * @hb: The destination hash bucket
+ *
+ * The hb->lock must be held by the caller, and is released here. A call to
+ * queue_me() is typically paired with exactly one call to unqueue_me(). The
+ * exceptions involve the PI related operations, which may use unqueue_me_pi()
+ * or nothing if the unqueue is done as part of the wake process and the unqueue
+ * state is implicit in the state of woken task (see futex_wait_requeue_pi() for
+ * an example).
+ */
static inline void queue_me(struct futex_q *q, struct futex_hash_bucket *hb)
{
int prio;
spin_unlock(&hb->lock);
}
-static inline void
-queue_unlock(struct futex_q *q, struct futex_hash_bucket *hb)
-{
- spin_unlock(&hb->lock);
- drop_futex_key_refs(&q->key);
-}
-
-/*
- * queue_me and unqueue_me must be called as a pair, each
- * exactly once. They are called with the hashed spinlock held.
+/**
+ * unqueue_me() - Remove the futex_q from its futex_hash_bucket
+ * @q: The futex_q to unqueue
+ *
+ * The q->lock_ptr must not be held by the caller. A call to unqueue_me() must
+ * be paired with exactly one earlier call to queue_me().
+ *
+ * Returns:
+ * 1 - if the futex_q was still queued (and we removed unqueued it)
+ * 0 - if the futex_q was already removed by the waking thread
*/
-
-/* Return 1 if we were still queued (ie. 0 means we were woken) */
static int unqueue_me(struct futex_q *q)
{
spinlock_t *lock_ptr;
static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q,
struct hrtimer_sleeper *timeout)
{
- queue_me(q, hb);
-
/*
- * There might have been scheduling since the queue_me(), as we
- * cannot hold a spinlock across the get_user() in case it
- * faults, and we cannot just set TASK_INTERRUPTIBLE state when
- * queueing ourselves into the futex hash. This code thus has to
- * rely on the futex_wake() code removing us from hash when it
- * wakes us up.
+ * The task state is guaranteed to be set before another task can
+ * wake it. set_current_state() is implemented using set_mb() and
+ * queue_me() calls spin_unlock() upon completion, both serializing
+ * access to the hash list and forcing another memory barrier.
*/
set_current_state(TASK_INTERRUPTIBLE);
+ queue_me(q, hb);
/* Arm the timer */
if (timeout) {
}
/*
- * !plist_node_empty() is safe here without any lock.
- * q.lock_ptr != 0 is not safe, because of ordering against wakeup.
+ * If we have been removed from the hash list, then another task
+ * has tried to wake us, and we can skip the call to schedule().
*/
if (likely(!plist_node_empty(&q->list))) {
/*
current->timer_slack_ns);
}
+retry:
/* Prepare to wait on uaddr. */
ret = futex_wait_setup(uaddr, val, fshared, &q, &hb);
if (ret)
goto out_put_key;
/*
- * We expect signal_pending(current), but another thread may
- * have handled it for us already.
+ * We expect signal_pending(current), but we might be the
+ * victim of a spurious wakeup as well.
*/
+ if (!signal_pending(current)) {
+ put_futex_key(fshared, &q.key);
+ goto retry;
+ }
+
ret = -ERESTARTSYS;
if (!abs_time)
goto out_put_key;
* Unqueue the futex_q and determine which it was.
*/
plist_del(&q->list, &q->list.plist);
- drop_futex_key_refs(&q->key);
+ /* Handle spurious wakeups gracefully */
+ ret = -EWOULDBLOCK;
if (timeout && !timeout->task)
ret = -ETIMEDOUT;
- else
+ else if (signal_pending(current))
ret = -ERESTARTNOINTR;
}
return ret;
/**
* futex_wait_requeue_pi() - Wait on uaddr and take uaddr2
- * @uaddr: the futex we initialyl wait on (non-pi)
+ * @uaddr: the futex we initially wait on (non-pi)
* @fshared: whether the futexes are shared (1) or not (0). They must be
* the same type, no requeueing from private to shared, etc.
* @val: the expected value of uaddr
* @abs_time: absolute timeout
- * @bitset: 32 bit wakeup bitset set by userspace, defaults to all.
+ * @bitset: 32 bit wakeup bitset set by userspace, defaults to all
* @clockrt: whether to use CLOCK_REALTIME (1) or CLOCK_MONOTONIC (0)
* @uaddr2: the pi futex we will take prior to returning to user-space
*
res = fixup_owner(uaddr2, fshared, &q, !ret);
/*
* If fixup_owner() returned an error, proprogate that. If it
- * acquired the lock, clear our -ETIMEDOUT or -EINTR.
+ * acquired the lock, clear -ETIMEDOUT or -EINTR.
*/
if (res)
ret = (res < 0) ? res : 0;
*/
/**
- * sys_set_robust_list - set the robust-futex list head of a task
- * @head: pointer to the list-head
- * @len: length of the list-head, as userspace expects
+ * sys_set_robust_list() - Set the robust-futex list head of a task
+ * @head: pointer to the list-head
+ * @len: length of the list-head, as userspace expects
*/
SYSCALL_DEFINE2(set_robust_list, struct robust_list_head __user *, head,
size_t, len)
}
/**
- * sys_get_robust_list - get the robust-futex list head of a task
- * @pid: pid of the process [zero for current task]
- * @head_ptr: pointer to a list-head pointer, the kernel fills it in
- * @len_ptr: pointer to a length field, the kernel fills in the header size
+ * sys_get_robust_list() - Get the robust-futex list head of a task
+ * @pid: pid of the process [zero for current task]
+ * @head_ptr: pointer to a list-head pointer, the kernel fills it in
+ * @len_ptr: pointer to a length field, the kernel fills in the header size
*/
SYSCALL_DEFINE3(get_robust_list, int, pid,
struct robust_list_head __user * __user *, head_ptr,
config GCOV_PROFILE_ALL
bool "Profile entire Kernel"
depends on GCOV_KERNEL
- depends on S390 || X86 || (PPC && EXPERIMENTAL)
+ depends on S390 || X86 || (PPC && EXPERIMENTAL) || MICROBLAZE
default n
---help---
This options activates profiling for the entire kernel.
* next event
* Called with interrupts disabled and base->lock held
*/
-static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base)
+static void
+hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
{
int i;
struct hrtimer_clock_base *base = cpu_base->clock_base;
- ktime_t expires;
+ ktime_t expires, expires_next;
- cpu_base->expires_next.tv64 = KTIME_MAX;
+ expires_next.tv64 = KTIME_MAX;
for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
struct hrtimer *timer;
*/
if (expires.tv64 < 0)
expires.tv64 = 0;
- if (expires.tv64 < cpu_base->expires_next.tv64)
- cpu_base->expires_next = expires;
+ if (expires.tv64 < expires_next.tv64)
+ expires_next = expires;
}
+ if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64)
+ return;
+
+ cpu_base->expires_next.tv64 = expires_next.tv64;
+
if (cpu_base->expires_next.tv64 != KTIME_MAX)
tick_program_event(cpu_base->expires_next, 1);
}
base->clock_base[CLOCK_REALTIME].offset =
timespec_to_ktime(realtime_offset);
- hrtimer_force_reprogram(base);
+ hrtimer_force_reprogram(base, 0);
spin_unlock(&base->lock);
}
/* "Retrigger" the interrupt to get things going */
retrigger_next_event(NULL);
local_irq_restore(flags);
- printk(KERN_DEBUG "Switched to high resolution mode on CPU %d\n",
- smp_processor_id());
return 1;
}
static inline int hrtimer_hres_active(void) { return 0; }
static inline int hrtimer_is_hres_enabled(void) { return 0; }
static inline int hrtimer_switch_to_hres(void) { return 0; }
-static inline void hrtimer_force_reprogram(struct hrtimer_cpu_base *base) { }
+static inline void
+hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
struct hrtimer_clock_base *base,
int wakeup)
struct hrtimer_clock_base *base,
unsigned long newstate, int reprogram)
{
- if (timer->state & HRTIMER_STATE_ENQUEUED) {
- /*
- * Remove the timer from the rbtree and replace the
- * first entry pointer if necessary.
- */
- if (base->first == &timer->node) {
- base->first = rb_next(&timer->node);
- /* Reprogram the clock event device. if enabled */
- if (reprogram && hrtimer_hres_active())
- hrtimer_force_reprogram(base->cpu_base);
+ if (!(timer->state & HRTIMER_STATE_ENQUEUED))
+ goto out;
+
+ /*
+ * Remove the timer from the rbtree and replace the first
+ * entry pointer if necessary.
+ */
+ if (base->first == &timer->node) {
+ base->first = rb_next(&timer->node);
+#ifdef CONFIG_HIGH_RES_TIMERS
+ /* Reprogram the clock event device. if enabled */
+ if (reprogram && hrtimer_hres_active()) {
+ ktime_t expires;
+
+ expires = ktime_sub(hrtimer_get_expires(timer),
+ base->offset);
+ if (base->cpu_base->expires_next.tv64 == expires.tv64)
+ hrtimer_force_reprogram(base->cpu_base, 1);
}
- rb_erase(&timer->node, &base->active);
+#endif
}
+ rb_erase(&timer->node, &base->active);
+out:
timer->state = newstate;
}
* Process updating of timeout sysctl
*/
int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
if (ret || !write)
goto out;
*/
#include <linux/irq.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/random.h>
static int ____call_usermodehelper(void *data)
{
struct subprocess_info *sub_info = data;
- enum umh_wait wait = sub_info->wait;
int retval;
BUG_ON(atomic_read(&sub_info->cred->usage) != 1);
*/
set_user_nice(current, 0);
- if (wait == UMH_WAIT_EXEC)
- complete(sub_info->complete);
-
retval = kernel_execve(sub_info->path, sub_info->argv, sub_info->envp);
/* Exec failed? */
- if (wait != UMH_WAIT_EXEC)
- sub_info->retval = retval;
+ sub_info->retval = retval;
do_exit(0);
}
switch (wait) {
case UMH_NO_WAIT:
- case UMH_WAIT_EXEC:
break;
case UMH_WAIT_PROC:
if (pid > 0)
break;
sub_info->retval = pid;
- break;
+ /* FALLTHROUGH */
+
+ case UMH_WAIT_EXEC:
+ complete(sub_info->complete);
}
}
return seq_open(filp, &kprobes_seq_ops);
}
-static struct file_operations debugfs_kprobes_operations = {
+static const struct file_operations debugfs_kprobes_operations = {
.open = kprobes_open,
.read = seq_read,
.llseek = seq_lseek,
return count;
}
-static struct file_operations fops_kp = {
+static const struct file_operations fops_kp = {
.read = read_enabled_file_bool,
.write = write_enabled_file_bool,
};
}
EXPORT_SYMBOL(kthread_create);
-/**
- * kthread_bind - bind a just-created kthread to a cpu.
- * @k: thread created by kthread_create().
- * @cpu: cpu (might not be online, must be possible) for @k to run on.
- *
- * Description: This function is equivalent to set_cpus_allowed(),
- * except that @cpu doesn't need to be online, and the thread must be
- * stopped (i.e., just returned from kthread_create()).
- */
-void kthread_bind(struct task_struct *k, unsigned int cpu)
-{
- /* Must have done schedule() in kthread() before we set_task_cpu */
- if (!wait_task_inactive(k, TASK_UNINTERRUPTIBLE)) {
- WARN_ON(1);
- return;
- }
- set_task_cpu(k, cpu);
- k->cpus_allowed = cpumask_of_cpu(cpu);
- k->rt.nr_cpus_allowed = 1;
- k->flags |= PF_THREAD_BOUND;
-}
-EXPORT_SYMBOL(kthread_bind);
-
/**
* kthread_stop - stop a thread created by kthread_create().
* @k: thread created by kthread_create().
#ifdef CONFIG_LOCK_STAT
static DEFINE_PER_CPU(struct lock_class_stats[MAX_LOCKDEP_KEYS], lock_stats);
+static inline u64 lockstat_clock(void)
+{
+ return cpu_clock(smp_processor_id());
+}
+
static int lock_point(unsigned long points[], unsigned long ip)
{
int i;
return i;
}
-static void lock_time_inc(struct lock_time *lt, s64 time)
+static void lock_time_inc(struct lock_time *lt, u64 time)
{
if (time > lt->max)
lt->max = time;
static void lock_release_holdtime(struct held_lock *hlock)
{
struct lock_class_stats *stats;
- s64 holdtime;
+ u64 holdtime;
if (!lock_stat)
return;
- holdtime = sched_clock() - hlock->holdtime_stamp;
+ holdtime = lockstat_clock() - hlock->holdtime_stamp;
stats = get_lock_stats(hlock_class(hlock));
if (hlock->read)
hlock->references = references;
#ifdef CONFIG_LOCK_STAT
hlock->waittime_stamp = 0;
- hlock->holdtime_stamp = sched_clock();
+ hlock->holdtime_stamp = lockstat_clock();
#endif
if (check == 2 && !mark_irqflags(curr, hlock))
if (hlock->instance != lock)
return;
- hlock->waittime_stamp = sched_clock();
+ hlock->waittime_stamp = lockstat_clock();
contention_point = lock_point(hlock_class(hlock)->contention_point, ip);
contending_point = lock_point(hlock_class(hlock)->contending_point,
struct held_lock *hlock, *prev_hlock;
struct lock_class_stats *stats;
unsigned int depth;
- u64 now;
- s64 waittime = 0;
+ u64 now, waittime = 0;
int i, cpu;
depth = curr->lockdep_depth;
cpu = smp_processor_id();
if (hlock->waittime_stamp) {
- now = sched_clock();
+ now = lockstat_clock();
waittime = now - hlock->waittime_stamp;
hlock->holdtime_stamp = now;
}
}
}
+static void free_modinfo(struct module *mod)
+{
+ struct module_attribute *attr;
+ int i;
+
+ for (i = 0; (attr = modinfo_attrs[i]); i++) {
+ if (attr->free)
+ attr->free(mod);
+ }
+}
+
#ifdef CONFIG_KALLSYMS
/* lookup symbol in given range of kernel_symbols */
return '?';
}
+static bool is_core_symbol(const Elf_Sym *src, const Elf_Shdr *sechdrs,
+ unsigned int shnum)
+{
+ const Elf_Shdr *sec;
+
+ if (src->st_shndx == SHN_UNDEF
+ || src->st_shndx >= shnum
+ || !src->st_name)
+ return false;
+
+ sec = sechdrs + src->st_shndx;
+ if (!(sec->sh_flags & SHF_ALLOC)
+#ifndef CONFIG_KALLSYMS_ALL
+ || !(sec->sh_flags & SHF_EXECINSTR)
+#endif
+ || (sec->sh_entsize & INIT_OFFSET_MASK))
+ return false;
+
+ return true;
+}
+
+static unsigned long layout_symtab(struct module *mod,
+ Elf_Shdr *sechdrs,
+ unsigned int symindex,
+ unsigned int strindex,
+ const Elf_Ehdr *hdr,
+ const char *secstrings,
+ unsigned long *pstroffs,
+ unsigned long *strmap)
+{
+ unsigned long symoffs;
+ Elf_Shdr *symsect = sechdrs + symindex;
+ Elf_Shdr *strsect = sechdrs + strindex;
+ const Elf_Sym *src;
+ const char *strtab;
+ unsigned int i, nsrc, ndst;
+
+ /* Put symbol section at end of init part of module. */
+ symsect->sh_flags |= SHF_ALLOC;
+ symsect->sh_entsize = get_offset(mod, &mod->init_size, symsect,
+ symindex) | INIT_OFFSET_MASK;
+ DEBUGP("\t%s\n", secstrings + symsect->sh_name);
+
+ src = (void *)hdr + symsect->sh_offset;
+ nsrc = symsect->sh_size / sizeof(*src);
+ strtab = (void *)hdr + strsect->sh_offset;
+ for (ndst = i = 1; i < nsrc; ++i, ++src)
+ if (is_core_symbol(src, sechdrs, hdr->e_shnum)) {
+ unsigned int j = src->st_name;
+
+ while(!__test_and_set_bit(j, strmap) && strtab[j])
+ ++j;
+ ++ndst;
+ }
+
+ /* Append room for core symbols at end of core part. */
+ symoffs = ALIGN(mod->core_size, symsect->sh_addralign ?: 1);
+ mod->core_size = symoffs + ndst * sizeof(Elf_Sym);
+
+ /* Put string table section at end of init part of module. */
+ strsect->sh_flags |= SHF_ALLOC;
+ strsect->sh_entsize = get_offset(mod, &mod->init_size, strsect,
+ strindex) | INIT_OFFSET_MASK;
+ DEBUGP("\t%s\n", secstrings + strsect->sh_name);
+
+ /* Append room for core symbols' strings at end of core part. */
+ *pstroffs = mod->core_size;
+ __set_bit(0, strmap);
+ mod->core_size += bitmap_weight(strmap, strsect->sh_size);
+
+ return symoffs;
+}
+
static void add_kallsyms(struct module *mod,
Elf_Shdr *sechdrs,
+ unsigned int shnum,
unsigned int symindex,
unsigned int strindex,
- const char *secstrings)
+ unsigned long symoffs,
+ unsigned long stroffs,
+ const char *secstrings,
+ unsigned long *strmap)
{
- unsigned int i;
+ unsigned int i, ndst;
+ const Elf_Sym *src;
+ Elf_Sym *dst;
+ char *s;
mod->symtab = (void *)sechdrs[symindex].sh_addr;
mod->num_symtab = sechdrs[symindex].sh_size / sizeof(Elf_Sym);
for (i = 0; i < mod->num_symtab; i++)
mod->symtab[i].st_info
= elf_type(&mod->symtab[i], sechdrs, secstrings, mod);
+
+ mod->core_symtab = dst = mod->module_core + symoffs;
+ src = mod->symtab;
+ *dst = *src;
+ for (ndst = i = 1; i < mod->num_symtab; ++i, ++src) {
+ if (!is_core_symbol(src, sechdrs, shnum))
+ continue;
+ dst[ndst] = *src;
+ dst[ndst].st_name = bitmap_weight(strmap, dst[ndst].st_name);
+ ++ndst;
+ }
+ mod->core_num_syms = ndst;
+
+ mod->core_strtab = s = mod->module_core + stroffs;
+ for (*s = 0, i = 1; i < sechdrs[strindex].sh_size; ++i)
+ if (test_bit(i, strmap))
+ *++s = mod->strtab[i];
}
#else
+static inline unsigned long layout_symtab(struct module *mod,
+ Elf_Shdr *sechdrs,
+ unsigned int symindex,
+ unsigned int strindex,
+ const Elf_Ehdr *hdr,
+ const char *secstrings,
+ unsigned long *pstroffs,
+ unsigned long *strmap)
+{
+ return 0;
+}
+
static inline void add_kallsyms(struct module *mod,
Elf_Shdr *sechdrs,
+ unsigned int shnum,
unsigned int symindex,
unsigned int strindex,
- const char *secstrings)
+ unsigned long symoffs,
+ unsigned long stroffs,
+ const char *secstrings,
+ const unsigned long *strmap)
{
}
#endif /* CONFIG_KALLSYMS */
struct module *mod;
long err = 0;
void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
+ unsigned long symoffs, stroffs, *strmap;
+
mm_segment_t old_fs;
DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
/* Don't keep modinfo and version sections. */
sechdrs[infoindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
sechdrs[versindex].sh_flags &= ~(unsigned long)SHF_ALLOC;
-#ifdef CONFIG_KALLSYMS
- /* Keep symbol and string tables for decoding later. */
- sechdrs[symindex].sh_flags |= SHF_ALLOC;
- sechdrs[strindex].sh_flags |= SHF_ALLOC;
-#endif
/* Check module struct version now, before we try to use module. */
if (!check_modstruct_version(sechdrs, versindex, mod)) {
goto free_hdr;
}
+ strmap = kzalloc(BITS_TO_LONGS(sechdrs[strindex].sh_size)
+ * sizeof(long), GFP_KERNEL);
+ if (!strmap) {
+ err = -ENOMEM;
+ goto free_mod;
+ }
+
if (find_module(mod->name)) {
err = -EEXIST;
goto free_mod;
this is done generically; there doesn't appear to be any
special cases for the architectures. */
layout_sections(mod, hdr, sechdrs, secstrings);
+ symoffs = layout_symtab(mod, sechdrs, symindex, strindex, hdr,
+ secstrings, &stroffs, strmap);
/* Do the allocs. */
ptr = module_alloc_update_bounds(mod->core_size);
percpu_modcopy(mod->percpu, (void *)sechdrs[pcpuindex].sh_addr,
sechdrs[pcpuindex].sh_size);
- add_kallsyms(mod, sechdrs, symindex, strindex, secstrings);
+ add_kallsyms(mod, sechdrs, hdr->e_shnum, symindex, strindex,
+ symoffs, stroffs, secstrings, strmap);
+ kfree(strmap);
+ strmap = NULL;
if (!mod->taints) {
struct _ddebug *debug;
synchronize_sched();
module_arch_cleanup(mod);
cleanup:
+ free_modinfo(mod);
kobject_del(&mod->mkobj.kobj);
kobject_put(&mod->mkobj.kobj);
free_unload:
module_unload_free(mod);
#if defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP)
- free_init:
percpu_modfree(mod->refptr);
+ free_init:
#endif
module_free(mod, mod->module_init);
free_core:
percpu_modfree(percpu);
free_mod:
kfree(args);
+ kfree(strmap);
free_hdr:
vfree(hdr);
return ERR_PTR(err);
/* Drop initial reference. */
module_put(mod);
trim_init_extable(mod);
+#ifdef CONFIG_KALLSYMS
+ mod->num_symtab = mod->core_num_syms;
+ mod->symtab = mod->core_symtab;
+ mod->strtab = mod->core_strtab;
+#endif
module_free(mod, mod->module_init);
mod->module_init = NULL;
mod->init_size = 0;
struct modversion_info *ver,
struct kernel_param *kp,
struct kernel_symbol *ks,
- struct marker *marker,
struct tracepoint *tp)
{
}
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/poison.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/kallsyms.h>
#include <linux/interrupt.h>
* (hence either you are in the same cgroup as task, or in an
* ancestor cgroup thereof)
*/
-static int ns_can_attach(struct cgroup_subsys *ss,
- struct cgroup *new_cgroup, struct task_struct *task)
+static int ns_can_attach(struct cgroup_subsys *ss, struct cgroup *new_cgroup,
+ struct task_struct *task, bool threadgroup)
{
if (current != task) {
if (!capable(CAP_SYS_ADMIN))
if (!cgroup_is_descendant(new_cgroup, task))
return -EPERM;
+ if (threadgroup) {
+ struct task_struct *c;
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &task->thread_group, thread_group) {
+ if (!cgroup_is_descendant(new_cgroup, c)) {
+ rcu_read_unlock();
+ return -EPERM;
+ }
+ }
+ rcu_read_unlock();
+ }
+
return 0;
}
atomic_notifier_call_chain(&panic_notifier_list, 0, buf);
+ bust_spinlocks(0);
+
if (!panic_blink)
panic_blink = no_blink;
mdelay(1);
i++;
}
- bust_spinlocks(0);
}
EXPORT_SYMBOL(panic);
#include <linux/device.h>
#include <linux/err.h>
#include <linux/slab.h>
+#include <linux/ctype.h>
#if 0
#define DEBUGP printk
}
for (i = 0; args[i]; i++) {
- if (args[i] == ' ' && !in_quote)
+ if (isspace(args[i]) && !in_quote)
break;
if (equals == 0) {
if (args[i] == '=')
next = args + i;
/* Chew up trailing spaces. */
- while (*next == ' ')
+ while (isspace(*next))
next++;
return next;
}
DEBUGP("Parsing ARGS: %s\n", args);
/* Chew leading spaces */
- while (*args == ' ')
+ while (isspace(*args))
args++;
while (*args) {
return -ENOSPC;
}
- if (kp->flags & KPARAM_KMALLOCED)
- kfree(*(char **)kp->arg);
-
/* This is a hack. We can't need to strdup in early boot, and we
* don't need to; this mangled commandline is preserved. */
if (slab_is_available()) {
- kp->flags |= KPARAM_KMALLOCED;
*(char **)kp->arg = kstrdup(val, GFP_KERNEL);
- if (!kp->arg)
+ if (!*(char **)kp->arg)
return -ENOMEM;
} else
*(const char **)kp->arg = val;
unsigned int min, unsigned int max,
void *elem, int elemsize,
int (*set)(const char *, struct kernel_param *kp),
+ u16 flags,
unsigned int *num)
{
int ret;
/* Get the name right for errors. */
kp.name = name;
kp.arg = elem;
+ kp.flags = flags;
/* No equals sign? */
if (!val) {
unsigned int temp_num;
return param_array(kp->name, val, 1, arr->max, arr->elem,
- arr->elemsize, arr->set, arr->num ?: &temp_num);
+ arr->elemsize, arr->set, kp->flags,
+ arr->num ?: &temp_num);
}
int param_array_get(char *buffer, struct kernel_param *kp)
void destroy_params(const struct kernel_param *params, unsigned num)
{
- unsigned int i;
-
- for (i = 0; i < num; i++)
- if (params[i].flags & KPARAM_KMALLOCED)
- kfree(*(char **)params[i].arg);
+ /* FIXME: This should free kmalloced charp parameters. It doesn't. */
}
static void __init kernel_add_sysfs_param(const char *name,
#include <linux/percpu.h>
#include <linux/ptrace.h>
#include <linux/vmstat.h>
+#include <linux/vmalloc.h>
#include <linux/hardirq.h>
#include <linux/rculist.h>
#include <linux/uaccess.h>
update_context_time(ctx);
perf_disable();
- if (ctx->nr_active) {
- list_for_each_entry(event, &ctx->group_list, group_entry) {
- if (event != event->group_leader)
- event_sched_out(event, cpuctx, ctx);
- else
- group_sched_out(event, cpuctx, ctx);
- }
- }
+ if (ctx->nr_active)
+ list_for_each_entry(event, &ctx->group_list, group_entry)
+ group_sched_out(event, cpuctx, ctx);
+
perf_enable();
out:
spin_unlock(&ctx->lock);
if (event->cpu != -1 && event->cpu != cpu)
continue;
- if (event != event->group_leader)
- event_sched_in(event, cpuctx, ctx, cpu);
- else {
- if (group_can_go_on(event, cpuctx, 1))
- group_sched_in(event, cpuctx, ctx, cpu);
- }
+ if (group_can_go_on(event, cpuctx, 1))
+ group_sched_in(event, cpuctx, ctx, cpu);
/*
* If this pinned group hasn't been scheduled,
if (event->cpu != -1 && event->cpu != cpu)
continue;
- if (event != event->group_leader) {
- if (event_sched_in(event, cpuctx, ctx, cpu))
+ if (group_can_go_on(event, cpuctx, can_add_hw))
+ if (group_sched_in(event, cpuctx, ctx, cpu))
can_add_hw = 0;
- } else {
- if (group_can_go_on(event, cpuctx, can_add_hw)) {
- if (group_sched_in(event, cpuctx, ctx, cpu))
- can_add_hw = 0;
- }
- }
}
perf_enable();
out:
u64 interrupts, freq;
spin_lock(&ctx->lock);
- list_for_each_entry(event, &ctx->group_list, group_entry) {
+ list_for_each_entry_rcu(event, &ctx->event_list, event_entry) {
if (event->state != PERF_EVENT_STATE_ACTIVE)
continue;
rcu_read_unlock();
}
-static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+static unsigned long perf_data_size(struct perf_mmap_data *data)
{
- struct perf_event *event = vma->vm_file->private_data;
- struct perf_mmap_data *data;
- int ret = VM_FAULT_SIGBUS;
-
- if (vmf->flags & FAULT_FLAG_MKWRITE) {
- if (vmf->pgoff == 0)
- ret = 0;
- return ret;
- }
-
- rcu_read_lock();
- data = rcu_dereference(event->data);
- if (!data)
- goto unlock;
-
- if (vmf->pgoff == 0) {
- vmf->page = virt_to_page(data->user_page);
- } else {
- int nr = vmf->pgoff - 1;
-
- if ((unsigned)nr > data->nr_pages)
- goto unlock;
+ return data->nr_pages << (PAGE_SHIFT + data->data_order);
+}
- if (vmf->flags & FAULT_FLAG_WRITE)
- goto unlock;
+#ifndef CONFIG_PERF_USE_VMALLOC
- vmf->page = virt_to_page(data->data_pages[nr]);
- }
+/*
+ * Back perf_mmap() with regular GFP_KERNEL-0 pages.
+ */
- get_page(vmf->page);
- vmf->page->mapping = vma->vm_file->f_mapping;
- vmf->page->index = vmf->pgoff;
+static struct page *
+perf_mmap_to_page(struct perf_mmap_data *data, unsigned long pgoff)
+{
+ if (pgoff > data->nr_pages)
+ return NULL;
- ret = 0;
-unlock:
- rcu_read_unlock();
+ if (pgoff == 0)
+ return virt_to_page(data->user_page);
- return ret;
+ return virt_to_page(data->data_pages[pgoff - 1]);
}
-static int perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
+static struct perf_mmap_data *
+perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
{
struct perf_mmap_data *data;
unsigned long size;
goto fail_data_pages;
}
+ data->data_order = 0;
data->nr_pages = nr_pages;
- atomic_set(&data->lock, -1);
-
- if (event->attr.watermark) {
- data->watermark = min_t(long, PAGE_SIZE * nr_pages,
- event->attr.wakeup_watermark);
- }
- if (!data->watermark)
- data->watermark = max(PAGE_SIZE, PAGE_SIZE * nr_pages / 4);
-
- rcu_assign_pointer(event->data, data);
- return 0;
+ return data;
fail_data_pages:
for (i--; i >= 0; i--)
kfree(data);
fail:
- return -ENOMEM;
+ return NULL;
}
static void perf_mmap_free_page(unsigned long addr)
__free_page(page);
}
-static void __perf_mmap_data_free(struct rcu_head *rcu_head)
+static void perf_mmap_data_free(struct perf_mmap_data *data)
{
- struct perf_mmap_data *data;
int i;
- data = container_of(rcu_head, struct perf_mmap_data, rcu_head);
-
perf_mmap_free_page((unsigned long)data->user_page);
for (i = 0; i < data->nr_pages; i++)
perf_mmap_free_page((unsigned long)data->data_pages[i]);
+}
+
+#else
+
+/*
+ * Back perf_mmap() with vmalloc memory.
+ *
+ * Required for architectures that have d-cache aliasing issues.
+ */
+
+static struct page *
+perf_mmap_to_page(struct perf_mmap_data *data, unsigned long pgoff)
+{
+ if (pgoff > (1UL << data->data_order))
+ return NULL;
+
+ return vmalloc_to_page((void *)data->user_page + pgoff * PAGE_SIZE);
+}
+
+static void perf_mmap_unmark_page(void *addr)
+{
+ struct page *page = vmalloc_to_page(addr);
+
+ page->mapping = NULL;
+}
+
+static void perf_mmap_data_free_work(struct work_struct *work)
+{
+ struct perf_mmap_data *data;
+ void *base;
+ int i, nr;
+
+ data = container_of(work, struct perf_mmap_data, work);
+ nr = 1 << data->data_order;
+ base = data->user_page;
+ for (i = 0; i < nr + 1; i++)
+ perf_mmap_unmark_page(base + (i * PAGE_SIZE));
+
+ vfree(base);
+}
+
+static void perf_mmap_data_free(struct perf_mmap_data *data)
+{
+ schedule_work(&data->work);
+}
+
+static struct perf_mmap_data *
+perf_mmap_data_alloc(struct perf_event *event, int nr_pages)
+{
+ struct perf_mmap_data *data;
+ unsigned long size;
+ void *all_buf;
+
+ WARN_ON(atomic_read(&event->mmap_count));
+
+ size = sizeof(struct perf_mmap_data);
+ size += sizeof(void *);
+
+ data = kzalloc(size, GFP_KERNEL);
+ if (!data)
+ goto fail;
+
+ INIT_WORK(&data->work, perf_mmap_data_free_work);
+
+ all_buf = vmalloc_user((nr_pages + 1) * PAGE_SIZE);
+ if (!all_buf)
+ goto fail_all_buf;
+
+ data->user_page = all_buf;
+ data->data_pages[0] = all_buf + PAGE_SIZE;
+ data->data_order = ilog2(nr_pages);
+ data->nr_pages = 1;
+
+ return data;
+
+fail_all_buf:
kfree(data);
+
+fail:
+ return NULL;
}
-static void perf_mmap_data_free(struct perf_event *event)
+#endif
+
+static int perf_mmap_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ struct perf_event *event = vma->vm_file->private_data;
+ struct perf_mmap_data *data;
+ int ret = VM_FAULT_SIGBUS;
+
+ if (vmf->flags & FAULT_FLAG_MKWRITE) {
+ if (vmf->pgoff == 0)
+ ret = 0;
+ return ret;
+ }
+
+ rcu_read_lock();
+ data = rcu_dereference(event->data);
+ if (!data)
+ goto unlock;
+
+ if (vmf->pgoff && (vmf->flags & FAULT_FLAG_WRITE))
+ goto unlock;
+
+ vmf->page = perf_mmap_to_page(data, vmf->pgoff);
+ if (!vmf->page)
+ goto unlock;
+
+ get_page(vmf->page);
+ vmf->page->mapping = vma->vm_file->f_mapping;
+ vmf->page->index = vmf->pgoff;
+
+ ret = 0;
+unlock:
+ rcu_read_unlock();
+
+ return ret;
+}
+
+static void
+perf_mmap_data_init(struct perf_event *event, struct perf_mmap_data *data)
+{
+ long max_size = perf_data_size(data);
+
+ atomic_set(&data->lock, -1);
+
+ if (event->attr.watermark) {
+ data->watermark = min_t(long, max_size,
+ event->attr.wakeup_watermark);
+ }
+
+ if (!data->watermark)
+ data->watermark = max_t(long, PAGE_SIZE, max_size / 2);
+
+
+ rcu_assign_pointer(event->data, data);
+}
+
+static void perf_mmap_data_free_rcu(struct rcu_head *rcu_head)
+{
+ struct perf_mmap_data *data;
+
+ data = container_of(rcu_head, struct perf_mmap_data, rcu_head);
+ perf_mmap_data_free(data);
+ kfree(data);
+}
+
+static void perf_mmap_data_release(struct perf_event *event)
{
struct perf_mmap_data *data = event->data;
WARN_ON(atomic_read(&event->mmap_count));
rcu_assign_pointer(event->data, NULL);
- call_rcu(&data->rcu_head, __perf_mmap_data_free);
+ call_rcu(&data->rcu_head, perf_mmap_data_free_rcu);
}
static void perf_mmap_open(struct vm_area_struct *vma)
WARN_ON_ONCE(event->ctx->parent_ctx);
if (atomic_dec_and_mutex_lock(&event->mmap_count, &event->mmap_mutex)) {
+ unsigned long size = perf_data_size(event->data);
struct user_struct *user = current_user();
- atomic_long_sub(event->data->nr_pages + 1, &user->locked_vm);
+ atomic_long_sub((size >> PAGE_SHIFT) + 1, &user->locked_vm);
vma->vm_mm->locked_vm -= event->data->nr_locked;
- perf_mmap_data_free(event);
+ perf_mmap_data_release(event);
mutex_unlock(&event->mmap_mutex);
}
}
-static struct vm_operations_struct perf_mmap_vmops = {
+static const struct vm_operations_struct perf_mmap_vmops = {
.open = perf_mmap_open,
.close = perf_mmap_close,
.fault = perf_mmap_fault,
unsigned long user_locked, user_lock_limit;
struct user_struct *user = current_user();
unsigned long locked, lock_limit;
+ struct perf_mmap_data *data;
unsigned long vma_size;
unsigned long nr_pages;
long user_extra, extra;
}
WARN_ON(event->data);
- ret = perf_mmap_data_alloc(event, nr_pages);
- if (ret)
+
+ data = perf_mmap_data_alloc(event, nr_pages);
+ ret = -ENOMEM;
+ if (!data)
goto unlock;
+ ret = 0;
+ perf_mmap_data_init(event, data);
+
atomic_set(&event->mmap_count, 1);
atomic_long_add(user_extra, &user->locked_vm);
vma->vm_mm->locked_vm += extra;
if (!data->writable)
return true;
- mask = (data->nr_pages << PAGE_SHIFT) - 1;
+ mask = perf_data_size(data) - 1;
offset = (offset - tail) & mask;
head = (head - tail) & mask;
const void *buf, unsigned int len)
{
unsigned int pages_mask;
- unsigned int offset;
+ unsigned long offset;
unsigned int size;
void **pages;
pages = handle->data->data_pages;
do {
- unsigned int page_offset;
+ unsigned long page_offset;
+ unsigned long page_size;
int nr;
nr = (offset >> PAGE_SHIFT) & pages_mask;
- page_offset = offset & (PAGE_SIZE - 1);
- size = min_t(unsigned int, PAGE_SIZE - page_offset, len);
+ page_size = 1UL << (handle->data->data_order + PAGE_SHIFT);
+ page_offset = offset & (page_size - 1);
+ size = min_t(unsigned int, page_size - page_offset, len);
memcpy(pages[nr] + page_offset, buf, size);
regs = task_pt_regs(current);
if (regs) {
- if (perf_event_overflow(event, 0, &data, regs))
- ret = HRTIMER_NORESTART;
+ if (!(event->attr.exclude_idle && current->pid == 0))
+ if (perf_event_overflow(event, 0, &data, regs))
+ ret = HRTIMER_NORESTART;
}
period = max_t(u64, 10000, event->hw.sample_period);
return ret;
}
+static void perf_swevent_start_hrtimer(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ hwc->hrtimer.function = perf_swevent_hrtimer;
+ if (hwc->sample_period) {
+ u64 period;
+
+ if (hwc->remaining) {
+ if (hwc->remaining < 0)
+ period = 10000;
+ else
+ period = hwc->remaining;
+ hwc->remaining = 0;
+ } else {
+ period = max_t(u64, 10000, hwc->sample_period);
+ }
+ __hrtimer_start_range_ns(&hwc->hrtimer,
+ ns_to_ktime(period), 0,
+ HRTIMER_MODE_REL, 0);
+ }
+}
+
+static void perf_swevent_cancel_hrtimer(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+
+ if (hwc->sample_period) {
+ ktime_t remaining = hrtimer_get_remaining(&hwc->hrtimer);
+ hwc->remaining = ktime_to_ns(remaining);
+
+ hrtimer_cancel(&hwc->hrtimer);
+ }
+}
+
/*
* Software event: cpu wall time clock
*/
int cpu = raw_smp_processor_id();
atomic64_set(&hwc->prev_count, cpu_clock(cpu));
- hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- hwc->hrtimer.function = perf_swevent_hrtimer;
- if (hwc->sample_period) {
- u64 period = max_t(u64, 10000, hwc->sample_period);
- __hrtimer_start_range_ns(&hwc->hrtimer,
- ns_to_ktime(period), 0,
- HRTIMER_MODE_REL, 0);
- }
+ perf_swevent_start_hrtimer(event);
return 0;
}
static void cpu_clock_perf_event_disable(struct perf_event *event)
{
- if (event->hw.sample_period)
- hrtimer_cancel(&event->hw.hrtimer);
+ perf_swevent_cancel_hrtimer(event);
cpu_clock_perf_event_update(event);
}
now = event->ctx->time;
atomic64_set(&hwc->prev_count, now);
- hrtimer_init(&hwc->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- hwc->hrtimer.function = perf_swevent_hrtimer;
- if (hwc->sample_period) {
- u64 period = max_t(u64, 10000, hwc->sample_period);
- __hrtimer_start_range_ns(&hwc->hrtimer,
- ns_to_ktime(period), 0,
- HRTIMER_MODE_REL, 0);
- }
+
+ perf_swevent_start_hrtimer(event);
return 0;
}
static void task_clock_perf_event_disable(struct perf_event *event)
{
- if (event->hw.sample_period)
- hrtimer_cancel(&event->hw.hrtimer);
+ perf_swevent_cancel_hrtimer(event);
task_clock_perf_event_update(event, event->ctx->time);
}
* We dont have to disable NMIs - we are only looking at
* the list, not manipulating it:
*/
- list_for_each_entry_rcu(event, &parent_ctx->event_list, event_entry) {
- if (event != event->group_leader)
- continue;
+ list_for_each_entry(event, &parent_ctx->group_list, group_entry) {
if (!event->attr.inherit) {
inherited_all = 0;
{
if (!(flags & CLONE_NEWPID))
return get_pid_ns(old_ns);
- if (flags & CLONE_THREAD)
+ if (flags & (CLONE_THREAD|CLONE_PARENT))
return ERR_PTR(-EINVAL);
return create_pid_namespace(old_ns);
}
/* The snapshot device should not be opened while we're running */
if (!atomic_add_unless(&snapshot_device_available, -1, 0)) {
error = -EBUSY;
+ swsusp_close(FMODE_READ);
goto Unlock;
}
pm_prepare_console();
error = pm_notifier_call_chain(PM_RESTORE_PREPARE);
if (error)
- goto Finish;
+ goto close_finish;
error = usermodehelper_disable();
if (error)
- goto Finish;
+ goto close_finish;
error = create_basic_memory_bitmaps();
if (error)
- goto Finish;
+ goto close_finish;
pr_debug("PM: Preparing processes for restore.\n");
error = prepare_processes();
pr_debug("PM: Reading hibernation image.\n");
error = swsusp_read(&flags);
+ swsusp_close(FMODE_READ);
if (!error)
hibernation_restore(flags & SF_PLATFORM_MODE);
mutex_unlock(&pm_mutex);
pr_debug("PM: Resume from disk failed.\n");
return error;
+close_finish:
+ swsusp_close(FMODE_READ);
+ goto Finish;
}
late_initcall(software_resume);
* The time it takes is system-specific though, so when we test this
* during system bootup we allow a LOT of time.
*/
-#define TEST_SUSPEND_SECONDS 5
+#define TEST_SUSPEND_SECONDS 10
static unsigned long suspend_test_start_time;
* has some performance issues. The stack dump of a WARN_ON
* is more likely to get the right attention than a printk...
*/
- WARN(msec > (TEST_SUSPEND_SECONDS * 1000), "Component: %s\n", label);
+ WARN(msec > (TEST_SUSPEND_SECONDS * 1000),
+ "Component: %s, time: %u\n", label, msec);
}
/*
#include <linux/module.h>
#include <linux/file.h>
-#include <linux/utsname.h>
#include <linux/delay.h>
#include <linux/bitops.h>
#include <linux/genhd.h>
{
unsigned int m;
int ret;
- int error = 0;
int nr_pages;
int err2;
struct bio *bio;
nr_pages = 0;
bio = NULL;
do_gettimeofday(&start);
- do {
+ while (1) {
ret = snapshot_read_next(snapshot, PAGE_SIZE);
- if (ret > 0) {
- error = swap_write_page(handle, data_of(*snapshot),
- &bio);
- if (error)
- break;
- if (!(nr_pages % m))
- printk("\b\b\b\b%3d%%", nr_pages / m);
- nr_pages++;
- }
- } while (ret > 0);
+ if (ret <= 0)
+ break;
+ ret = swap_write_page(handle, data_of(*snapshot), &bio);
+ if (ret)
+ break;
+ if (!(nr_pages % m))
+ printk("\b\b\b\b%3d%%", nr_pages / m);
+ nr_pages++;
+ }
err2 = wait_on_bio_chain(&bio);
do_gettimeofday(&stop);
- if (!error)
- error = err2;
- if (!error)
+ if (!ret)
+ ret = err2;
+ if (!ret)
printk("\b\b\b\bdone\n");
+ else
+ printk("\n");
swsusp_show_speed(&start, &stop, nr_to_write, "Wrote");
- return error;
+ return ret;
}
/**
snapshot_write_finalize(snapshot);
if (!snapshot_image_loaded(snapshot))
error = -ENODATA;
- }
+ } else
+ printk("\n");
swsusp_show_speed(&start, &stop, nr_to_read, "Read");
return error;
}
error = load_image(&handle, &snapshot, header->pages - 1);
release_swap_reader(&handle);
- blkdev_put(resume_bdev, FMODE_READ);
-
if (!error)
pr_debug("PM: Image successfully loaded\n");
else
error = bio_read_page(swsusp_resume_block,
swsusp_header, NULL);
if (error)
- return error;
+ goto put;
if (!memcmp(SWSUSP_SIG, swsusp_header->sig, 10)) {
memcpy(swsusp_header->sig, swsusp_header->orig_sig, 10);
error = bio_write_page(swsusp_resume_block,
swsusp_header, NULL);
} else {
- return -EINVAL;
+ error = -EINVAL;
}
+
+put:
if (error)
blkdev_put(resume_bdev, FMODE_READ);
else
* or self-reaping. Do notification now if it would have happened earlier.
* If it should reap itself, return true.
*
- * If it's our own child, there is no notification to do.
- * But if our normal children self-reap, then this child
- * was prevented by ptrace and we must reap it now.
+ * If it's our own child, there is no notification to do. But if our normal
+ * children self-reap, then this child was prevented by ptrace and we must
+ * reap it now, in that case we must also wake up sub-threads sleeping in
+ * do_wait().
*/
static bool __ptrace_detach(struct task_struct *tracer, struct task_struct *p)
{
if (!task_detached(p) && thread_group_empty(p)) {
if (!same_thread_group(p->real_parent, tracer))
do_notify_parent(p, p->exit_signal);
- else if (ignoring_children(tracer->sighand))
+ else if (ignoring_children(tracer->sighand)) {
+ __wake_up_parent(p, tracer);
p->exit_signal = -1;
+ }
}
if (task_detached(p)) {
/* Mark it as in the process of being reaped. */
#include <linux/module.h>
#include <linux/kernel_stat.h>
-enum rcu_barrier {
- RCU_BARRIER_STD,
- RCU_BARRIER_BH,
- RCU_BARRIER_SCHED,
-};
+#ifdef CONFIG_DEBUG_LOCK_ALLOC
+static struct lock_class_key rcu_lock_key;
+struct lockdep_map rcu_lock_map =
+ STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
+EXPORT_SYMBOL_GPL(rcu_lock_map);
+#endif
-static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL};
-static atomic_t rcu_barrier_cpu_count;
-static DEFINE_MUTEX(rcu_barrier_mutex);
-static struct completion rcu_barrier_completion;
int rcu_scheduler_active __read_mostly;
-static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
-static struct rcu_head rcu_migrate_head[3];
-static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
-
/*
* Awaken the corresponding synchronize_rcu() instance now that a
* grace period has elapsed.
}
EXPORT_SYMBOL_GPL(synchronize_rcu_bh);
-static void rcu_barrier_callback(struct rcu_head *notused)
-{
- if (atomic_dec_and_test(&rcu_barrier_cpu_count))
- complete(&rcu_barrier_completion);
-}
-
-/*
- * Called with preemption disabled, and from cross-cpu IRQ context.
- */
-static void rcu_barrier_func(void *type)
-{
- int cpu = smp_processor_id();
- struct rcu_head *head = &per_cpu(rcu_barrier_head, cpu);
-
- atomic_inc(&rcu_barrier_cpu_count);
- switch ((enum rcu_barrier)type) {
- case RCU_BARRIER_STD:
- call_rcu(head, rcu_barrier_callback);
- break;
- case RCU_BARRIER_BH:
- call_rcu_bh(head, rcu_barrier_callback);
- break;
- case RCU_BARRIER_SCHED:
- call_rcu_sched(head, rcu_barrier_callback);
- break;
- }
-}
-
-static inline void wait_migrated_callbacks(void)
-{
- wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
- smp_mb(); /* In case we didn't sleep. */
-}
-
-/*
- * Orchestrate the specified type of RCU barrier, waiting for all
- * RCU callbacks of the specified type to complete.
- */
-static void _rcu_barrier(enum rcu_barrier type)
-{
- BUG_ON(in_interrupt());
- /* Take cpucontrol mutex to protect against CPU hotplug */
- mutex_lock(&rcu_barrier_mutex);
- init_completion(&rcu_barrier_completion);
- /*
- * Initialize rcu_barrier_cpu_count to 1, then invoke
- * rcu_barrier_func() on each CPU, so that each CPU also has
- * incremented rcu_barrier_cpu_count. Only then is it safe to
- * decrement rcu_barrier_cpu_count -- otherwise the first CPU
- * might complete its grace period before all of the other CPUs
- * did their increment, causing this function to return too
- * early.
- */
- atomic_set(&rcu_barrier_cpu_count, 1);
- on_each_cpu(rcu_barrier_func, (void *)type, 1);
- if (atomic_dec_and_test(&rcu_barrier_cpu_count))
- complete(&rcu_barrier_completion);
- wait_for_completion(&rcu_barrier_completion);
- mutex_unlock(&rcu_barrier_mutex);
- wait_migrated_callbacks();
-}
-
-/**
- * rcu_barrier - Wait until all in-flight call_rcu() callbacks complete.
- */
-void rcu_barrier(void)
-{
- _rcu_barrier(RCU_BARRIER_STD);
-}
-EXPORT_SYMBOL_GPL(rcu_barrier);
-
-/**
- * rcu_barrier_bh - Wait until all in-flight call_rcu_bh() callbacks complete.
- */
-void rcu_barrier_bh(void)
-{
- _rcu_barrier(RCU_BARRIER_BH);
-}
-EXPORT_SYMBOL_GPL(rcu_barrier_bh);
-
-/**
- * rcu_barrier_sched - Wait for in-flight call_rcu_sched() callbacks.
- */
-void rcu_barrier_sched(void)
-{
- _rcu_barrier(RCU_BARRIER_SCHED);
-}
-EXPORT_SYMBOL_GPL(rcu_barrier_sched);
-
-static void rcu_migrate_callback(struct rcu_head *notused)
-{
- if (atomic_dec_and_test(&rcu_migrate_type_count))
- wake_up(&rcu_migrate_wq);
-}
-
-extern int rcu_cpu_notify(struct notifier_block *self,
- unsigned long action, void *hcpu);
-
static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
unsigned long action, void *hcpu)
{
- rcu_cpu_notify(self, action, hcpu);
- if (action == CPU_DYING) {
- /*
- * preempt_disable() in on_each_cpu() prevents stop_machine(),
- * so when "on_each_cpu(rcu_barrier_func, (void *)type, 1);"
- * returns, all online cpus have queued rcu_barrier_func(),
- * and the dead cpu(if it exist) queues rcu_migrate_callback()s.
- *
- * These callbacks ensure _rcu_barrier() waits for all
- * RCU callbacks of the specified type to complete.
- */
- atomic_set(&rcu_migrate_type_count, 3);
- call_rcu_bh(rcu_migrate_head, rcu_migrate_callback);
- call_rcu_sched(rcu_migrate_head + 1, rcu_migrate_callback);
- call_rcu(rcu_migrate_head + 2, rcu_migrate_callback);
- } else if (action == CPU_DOWN_PREPARE) {
- /* Don't need to wait until next removal operation. */
- /* rcu_migrate_head is protected by cpu_add_remove_lock */
- wait_migrated_callbacks();
- }
-
- return NOTIFY_OK;
+ return rcu_cpu_notify(self, action, hcpu);
}
void __init rcu_init(void)
.name = "sched_sync"
};
-extern int rcu_expedited_torture_stats(char *page);
-
static struct rcu_torture_ops sched_expedited_ops = {
.init = rcu_sync_torture_init,
.cleanup = NULL,
old_rp = rcu_torture_current;
rp->rtort_mbtest = 1;
rcu_assign_pointer(rcu_torture_current, rp);
- smp_wmb();
+ smp_wmb(); /* Mods to old_rp must follow rcu_assign_pointer() */
if (old_rp) {
i = old_rp->rtort_pipe_count;
if (i > RCU_TORTURE_PIPE_LEN)
#include "rcutree.h"
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
-static struct lock_class_key rcu_lock_key;
-struct lockdep_map rcu_lock_map =
- STATIC_LOCKDEP_MAP_INIT("rcu_read_lock", &rcu_lock_key);
-EXPORT_SYMBOL_GPL(rcu_lock_map);
-#endif
-
/* Data structures. */
#define RCU_STATE_INITIALIZER(name) { \
.gpnum = -300, \
.completed = -300, \
.onofflock = __SPIN_LOCK_UNLOCKED(&name.onofflock), \
+ .orphan_cbs_list = NULL, \
+ .orphan_cbs_tail = &name.orphan_cbs_list, \
+ .orphan_qlen = 0, \
.fqslock = __SPIN_LOCK_UNLOCKED(&name.fqslock), \
.n_force_qs = 0, \
.n_force_qs_ngp = 0, \
struct rcu_state rcu_bh_state = RCU_STATE_INITIALIZER(rcu_bh_state);
DEFINE_PER_CPU(struct rcu_data, rcu_bh_data);
-extern long rcu_batches_completed_sched(void);
-static struct rcu_node *rcu_get_root(struct rcu_state *rsp);
-static void cpu_quiet_msk(unsigned long mask, struct rcu_state *rsp,
- struct rcu_node *rnp, unsigned long flags);
-static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags);
-#ifdef CONFIG_HOTPLUG_CPU
-static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp);
-#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-static void __rcu_process_callbacks(struct rcu_state *rsp,
- struct rcu_data *rdp);
-static void __call_rcu(struct rcu_head *head,
- void (*func)(struct rcu_head *rcu),
- struct rcu_state *rsp);
-static int __rcu_pending(struct rcu_state *rsp, struct rcu_data *rdp);
-static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_state *rsp,
- int preemptable);
-#include "rcutree_plugin.h"
+/*
+ * Return true if an RCU grace period is in progress. The ACCESS_ONCE()s
+ * permit this function to be invoked without holding the root rcu_node
+ * structure's ->lock, but of course results can be subject to change.
+ */
+static int rcu_gp_in_progress(struct rcu_state *rsp)
+{
+ return ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum);
+}
/*
* Note a quiescent state. Because we do not need to know
static int qhimark = 10000; /* If this many pending, ignore blimit. */
static int qlowmark = 100; /* Once only this many pending, use blimit. */
+module_param(blimit, int, 0);
+module_param(qhimark, int, 0);
+module_param(qlowmark, int, 0);
+
static void force_quiescent_state(struct rcu_state *rsp, int relaxed);
static int rcu_pending(int cpu);
static int
cpu_needs_another_gp(struct rcu_state *rsp, struct rcu_data *rdp)
{
- /* ACCESS_ONCE() because we are accessing outside of lock. */
- return *rdp->nxttail[RCU_DONE_TAIL] &&
- ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum);
+ return *rdp->nxttail[RCU_DONE_TAIL] && !rcu_gp_in_progress(rsp);
}
/*
/*
* Snapshot the specified CPU's dynticks counter so that we can later
* credit them with an implicit quiescent state. Return 1 if this CPU
- * is already in a quiescent state courtesy of dynticks idle mode.
+ * is in dynticks idle mode, which is an extended quiescent state.
*/
static int dyntick_save_progress_counter(struct rcu_data *rdp)
{
long delta;
unsigned long flags;
struct rcu_node *rnp = rcu_get_root(rsp);
- struct rcu_node *rnp_cur = rsp->level[NUM_RCU_LVLS - 1];
- struct rcu_node *rnp_end = &rsp->node[NUM_RCU_NODES];
/* Only let one CPU complain about others per time interval. */
spin_lock_irqsave(&rnp->lock, flags);
delta = jiffies - rsp->jiffies_stall;
- if (delta < RCU_STALL_RAT_DELAY || rsp->gpnum == rsp->completed) {
+ if (delta < RCU_STALL_RAT_DELAY || !rcu_gp_in_progress(rsp)) {
spin_unlock_irqrestore(&rnp->lock, flags);
return;
}
rsp->jiffies_stall = jiffies + RCU_SECONDS_TILL_STALL_RECHECK;
+
+ /*
+ * Now rat on any tasks that got kicked up to the root rcu_node
+ * due to CPU offlining.
+ */
+ rcu_print_task_stall(rnp);
spin_unlock_irqrestore(&rnp->lock, flags);
/* OK, time to rat on our buddy... */
printk(KERN_ERR "INFO: RCU detected CPU stalls:");
- for (; rnp_cur < rnp_end; rnp_cur++) {
+ rcu_for_each_leaf_node(rsp, rnp) {
rcu_print_task_stall(rnp);
- if (rnp_cur->qsmask == 0)
+ if (rnp->qsmask == 0)
continue;
- for (cpu = 0; cpu <= rnp_cur->grphi - rnp_cur->grplo; cpu++)
- if (rnp_cur->qsmask & (1UL << cpu))
- printk(" %d", rnp_cur->grplo + cpu);
+ for (cpu = 0; cpu <= rnp->grphi - rnp->grplo; cpu++)
+ if (rnp->qsmask & (1UL << cpu))
+ printk(" %d", rnp->grplo + cpu);
}
printk(" (detected by %d, t=%ld jiffies)\n",
smp_processor_id(), (long)(jiffies - rsp->gp_start));
/* We haven't checked in, so go dump stack. */
print_cpu_stall(rsp);
- } else if (rsp->gpnum != rsp->completed &&
- delta >= RCU_STALL_RAT_DELAY) {
+ } else if (rcu_gp_in_progress(rsp) && delta >= RCU_STALL_RAT_DELAY) {
/* They had two time units to dump stack, so complain. */
print_other_cpu_stall(rsp);
note_new_gpnum(rsp, rdp);
/*
- * Because we are first, we know that all our callbacks will
- * be covered by this upcoming grace period, even the ones
- * that were registered arbitrarily recently.
+ * Because this CPU just now started the new grace period, we know
+ * that all of its callbacks will be covered by this upcoming grace
+ * period, even the ones that were registered arbitrarily recently.
+ * Therefore, advance all outstanding callbacks to RCU_WAIT_TAIL.
+ *
+ * Other CPUs cannot be sure exactly when the grace period started.
+ * Therefore, their recently registered callbacks must pass through
+ * an additional RCU_NEXT_READY stage, so that they will be handled
+ * by the next RCU grace period.
*/
rdp->nxttail[RCU_NEXT_READY_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
rdp->nxttail[RCU_WAIT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
* one corresponding to this CPU, due to the fact that we have
* irqs disabled.
*/
- for (rnp = &rsp->node[0]; rnp < &rsp->node[NUM_RCU_NODES]; rnp++) {
+ rcu_for_each_node_breadth_first(rsp, rnp) {
spin_lock(&rnp->lock); /* irqs already disabled. */
rcu_preempt_check_blocked_tasks(rnp);
rnp->qsmask = rnp->qsmaskinit;
* hold rnp->lock, as required by rcu_start_gp(), which will release it.
*/
static void cpu_quiet_msk_finish(struct rcu_state *rsp, unsigned long flags)
- __releases(rnp->lock)
+ __releases(rcu_get_root(rsp)->lock)
{
- WARN_ON_ONCE(rsp->completed == rsp->gpnum);
+ WARN_ON_ONCE(!rcu_gp_in_progress(rsp));
rsp->completed = rsp->gpnum;
rcu_process_gp_end(rsp, rsp->rda[smp_processor_id()]);
rcu_start_gp(rsp, flags); /* releases root node's rnp->lock. */
#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * Move a dying CPU's RCU callbacks to the ->orphan_cbs_list for the
+ * specified flavor of RCU. The callbacks will be adopted by the next
+ * _rcu_barrier() invocation or by the CPU_DEAD notifier, whichever
+ * comes first. Because this is invoked from the CPU_DYING notifier,
+ * irqs are already disabled.
+ */
+static void rcu_send_cbs_to_orphanage(struct rcu_state *rsp)
+{
+ int i;
+ struct rcu_data *rdp = rsp->rda[smp_processor_id()];
+
+ if (rdp->nxtlist == NULL)
+ return; /* irqs disabled, so comparison is stable. */
+ spin_lock(&rsp->onofflock); /* irqs already disabled. */
+ *rsp->orphan_cbs_tail = rdp->nxtlist;
+ rsp->orphan_cbs_tail = rdp->nxttail[RCU_NEXT_TAIL];
+ rdp->nxtlist = NULL;
+ for (i = 0; i < RCU_NEXT_SIZE; i++)
+ rdp->nxttail[i] = &rdp->nxtlist;
+ rsp->orphan_qlen += rdp->qlen;
+ rdp->qlen = 0;
+ spin_unlock(&rsp->onofflock); /* irqs remain disabled. */
+}
+
+/*
+ * Adopt previously orphaned RCU callbacks.
+ */
+static void rcu_adopt_orphan_cbs(struct rcu_state *rsp)
+{
+ unsigned long flags;
+ struct rcu_data *rdp;
+
+ spin_lock_irqsave(&rsp->onofflock, flags);
+ rdp = rsp->rda[smp_processor_id()];
+ if (rsp->orphan_cbs_list == NULL) {
+ spin_unlock_irqrestore(&rsp->onofflock, flags);
+ return;
+ }
+ *rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_cbs_list;
+ rdp->nxttail[RCU_NEXT_TAIL] = rsp->orphan_cbs_tail;
+ rdp->qlen += rsp->orphan_qlen;
+ rsp->orphan_cbs_list = NULL;
+ rsp->orphan_cbs_tail = &rsp->orphan_cbs_list;
+ rsp->orphan_qlen = 0;
+ spin_unlock_irqrestore(&rsp->onofflock, flags);
+}
+
/*
* Remove the outgoing CPU from the bitmasks in the rcu_node hierarchy
* and move all callbacks from the outgoing CPU to the current one.
*/
static void __rcu_offline_cpu(int cpu, struct rcu_state *rsp)
{
- int i;
unsigned long flags;
long lastcomp;
unsigned long mask;
struct rcu_data *rdp = rsp->rda[cpu];
- struct rcu_data *rdp_me;
struct rcu_node *rnp;
/* Exclude any attempts to start a new grace period. */
spin_unlock(&rnp->lock); /* irqs remain disabled. */
break;
}
- rcu_preempt_offline_tasks(rsp, rnp, rdp);
+
+ /*
+ * If there was a task blocking the current grace period,
+ * and if all CPUs have checked in, we need to propagate
+ * the quiescent state up the rcu_node hierarchy. But that
+ * is inconvenient at the moment due to deadlock issues if
+ * this should end the current grace period. So set the
+ * offlined CPU's bit in ->qsmask in order to force the
+ * next force_quiescent_state() invocation to clean up this
+ * mess in a deadlock-free manner.
+ */
+ if (rcu_preempt_offline_tasks(rsp, rnp, rdp) && !rnp->qsmask)
+ rnp->qsmask |= mask;
+
mask = rnp->grpmask;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
rnp = rnp->parent;
} while (rnp != NULL);
lastcomp = rsp->completed;
- spin_unlock(&rsp->onofflock); /* irqs remain disabled. */
+ spin_unlock_irqrestore(&rsp->onofflock, flags);
- /*
- * Move callbacks from the outgoing CPU to the running CPU.
- * Note that the outgoing CPU is now quiscent, so it is now
- * (uncharacteristically) safe to access its rcu_data structure.
- * Note also that we must carefully retain the order of the
- * outgoing CPU's callbacks in order for rcu_barrier() to work
- * correctly. Finally, note that we start all the callbacks
- * afresh, even those that have passed through a grace period
- * and are therefore ready to invoke. The theory is that hotplug
- * events are rare, and that if they are frequent enough to
- * indefinitely delay callbacks, you have far worse things to
- * be worrying about.
- */
- rdp_me = rsp->rda[smp_processor_id()];
- if (rdp->nxtlist != NULL) {
- *rdp_me->nxttail[RCU_NEXT_TAIL] = rdp->nxtlist;
- rdp_me->nxttail[RCU_NEXT_TAIL] = rdp->nxttail[RCU_NEXT_TAIL];
- rdp->nxtlist = NULL;
- for (i = 0; i < RCU_NEXT_SIZE; i++)
- rdp->nxttail[i] = &rdp->nxtlist;
- rdp_me->qlen += rdp->qlen;
- rdp->qlen = 0;
- }
- local_irq_restore(flags);
+ rcu_adopt_orphan_cbs(rsp);
}
/*
#else /* #ifdef CONFIG_HOTPLUG_CPU */
+static void rcu_send_cbs_to_orphanage(struct rcu_state *rsp)
+{
+}
+
+static void rcu_adopt_orphan_cbs(struct rcu_state *rsp)
+{
+}
+
static void rcu_offline_cpu(int cpu)
{
}
* Invoke any RCU callbacks that have made it to the end of their grace
* period. Thottle as specified by rdp->blimit.
*/
-static void rcu_do_batch(struct rcu_data *rdp)
+static void rcu_do_batch(struct rcu_state *rsp, struct rcu_data *rdp)
{
unsigned long flags;
struct rcu_head *next, *list, **tail;
if (rdp->blimit == LONG_MAX && rdp->qlen <= qlowmark)
rdp->blimit = blimit;
+ /* Reset ->qlen_last_fqs_check trigger if enough CBs have drained. */
+ if (rdp->qlen == 0 && rdp->qlen_last_fqs_check != 0) {
+ rdp->qlen_last_fqs_check = 0;
+ rdp->n_force_qs_snap = rsp->n_force_qs;
+ } else if (rdp->qlen < rdp->qlen_last_fqs_check - qhimark)
+ rdp->qlen_last_fqs_check = rdp->qlen;
+
local_irq_restore(flags);
/* Re-raise the RCU softirq if there are callbacks remaining. */
int cpu;
unsigned long flags;
unsigned long mask;
- struct rcu_node *rnp_cur = rsp->level[NUM_RCU_LVLS - 1];
- struct rcu_node *rnp_end = &rsp->node[NUM_RCU_NODES];
+ struct rcu_node *rnp;
- for (; rnp_cur < rnp_end; rnp_cur++) {
+ rcu_for_each_leaf_node(rsp, rnp) {
mask = 0;
- spin_lock_irqsave(&rnp_cur->lock, flags);
+ spin_lock_irqsave(&rnp->lock, flags);
if (rsp->completed != lastcomp) {
- spin_unlock_irqrestore(&rnp_cur->lock, flags);
+ spin_unlock_irqrestore(&rnp->lock, flags);
return 1;
}
- if (rnp_cur->qsmask == 0) {
- spin_unlock_irqrestore(&rnp_cur->lock, flags);
+ if (rnp->qsmask == 0) {
+ spin_unlock_irqrestore(&rnp->lock, flags);
continue;
}
- cpu = rnp_cur->grplo;
+ cpu = rnp->grplo;
bit = 1;
- for (; cpu <= rnp_cur->grphi; cpu++, bit <<= 1) {
- if ((rnp_cur->qsmask & bit) != 0 && f(rsp->rda[cpu]))
+ for (; cpu <= rnp->grphi; cpu++, bit <<= 1) {
+ if ((rnp->qsmask & bit) != 0 && f(rsp->rda[cpu]))
mask |= bit;
}
if (mask != 0 && rsp->completed == lastcomp) {
- /* cpu_quiet_msk() releases rnp_cur->lock. */
- cpu_quiet_msk(mask, rsp, rnp_cur, flags);
+ /* cpu_quiet_msk() releases rnp->lock. */
+ cpu_quiet_msk(mask, rsp, rnp, flags);
continue;
}
- spin_unlock_irqrestore(&rnp_cur->lock, flags);
+ spin_unlock_irqrestore(&rnp->lock, flags);
}
return 0;
}
struct rcu_node *rnp = rcu_get_root(rsp);
u8 signaled;
- if (ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum))
+ if (!rcu_gp_in_progress(rsp))
return; /* No grace period in progress, nothing to force. */
if (!spin_trylock_irqsave(&rsp->fqslock, flags)) {
rsp->n_force_qs_lh++; /* Inexact, can lose counts. Tough! */
}
/* If there are callbacks ready, invoke them. */
- rcu_do_batch(rdp);
+ rcu_do_batch(rsp, rdp);
}
/*
rdp->nxttail[RCU_NEXT_TAIL] = &head->next;
/* Start a new grace period if one not already started. */
- if (ACCESS_ONCE(rsp->completed) == ACCESS_ONCE(rsp->gpnum)) {
+ if (!rcu_gp_in_progress(rsp)) {
unsigned long nestflag;
struct rcu_node *rnp_root = rcu_get_root(rsp);
rcu_start_gp(rsp, nestflag); /* releases rnp_root->lock. */
}
- /* Force the grace period if too many callbacks or too long waiting. */
- if (unlikely(++rdp->qlen > qhimark)) {
+ /*
+ * Force the grace period if too many callbacks or too long waiting.
+ * Enforce hysteresis, and don't invoke force_quiescent_state()
+ * if some other CPU has recently done so. Also, don't bother
+ * invoking force_quiescent_state() if the newly enqueued callback
+ * is the only one waiting for a grace period to complete.
+ */
+ if (unlikely(++rdp->qlen > rdp->qlen_last_fqs_check + qhimark)) {
rdp->blimit = LONG_MAX;
- force_quiescent_state(rsp, 0);
+ if (rsp->n_force_qs == rdp->n_force_qs_snap &&
+ *rdp->nxttail[RCU_DONE_TAIL] != head)
+ force_quiescent_state(rsp, 0);
+ rdp->n_force_qs_snap = rsp->n_force_qs;
+ rdp->qlen_last_fqs_check = rdp->qlen;
} else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
local_irq_restore(flags);
}
/* Has an RCU GP gone long enough to send resched IPIs &c? */
- if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
+ if (rcu_gp_in_progress(rsp) &&
((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)) {
rdp->n_rp_need_fqs++;
return 1;
rcu_preempt_needs_cpu(cpu);
}
+static DEFINE_PER_CPU(struct rcu_head, rcu_barrier_head) = {NULL};
+static atomic_t rcu_barrier_cpu_count;
+static DEFINE_MUTEX(rcu_barrier_mutex);
+static struct completion rcu_barrier_completion;
+
+static void rcu_barrier_callback(struct rcu_head *notused)
+{
+ if (atomic_dec_and_test(&rcu_barrier_cpu_count))
+ complete(&rcu_barrier_completion);
+}
+
+/*
+ * Called with preemption disabled, and from cross-cpu IRQ context.
+ */
+static void rcu_barrier_func(void *type)
+{
+ int cpu = smp_processor_id();
+ struct rcu_head *head = &per_cpu(rcu_barrier_head, cpu);
+ void (*call_rcu_func)(struct rcu_head *head,
+ void (*func)(struct rcu_head *head));
+
+ atomic_inc(&rcu_barrier_cpu_count);
+ call_rcu_func = type;
+ call_rcu_func(head, rcu_barrier_callback);
+}
+
+/*
+ * Orchestrate the specified type of RCU barrier, waiting for all
+ * RCU callbacks of the specified type to complete.
+ */
+static void _rcu_barrier(struct rcu_state *rsp,
+ void (*call_rcu_func)(struct rcu_head *head,
+ void (*func)(struct rcu_head *head)))
+{
+ BUG_ON(in_interrupt());
+ /* Take mutex to serialize concurrent rcu_barrier() requests. */
+ mutex_lock(&rcu_barrier_mutex);
+ init_completion(&rcu_barrier_completion);
+ /*
+ * Initialize rcu_barrier_cpu_count to 1, then invoke
+ * rcu_barrier_func() on each CPU, so that each CPU also has
+ * incremented rcu_barrier_cpu_count. Only then is it safe to
+ * decrement rcu_barrier_cpu_count -- otherwise the first CPU
+ * might complete its grace period before all of the other CPUs
+ * did their increment, causing this function to return too
+ * early.
+ */
+ atomic_set(&rcu_barrier_cpu_count, 1);
+ preempt_disable(); /* stop CPU_DYING from filling orphan_cbs_list */
+ rcu_adopt_orphan_cbs(rsp);
+ on_each_cpu(rcu_barrier_func, (void *)call_rcu_func, 1);
+ preempt_enable(); /* CPU_DYING can again fill orphan_cbs_list */
+ if (atomic_dec_and_test(&rcu_barrier_cpu_count))
+ complete(&rcu_barrier_completion);
+ wait_for_completion(&rcu_barrier_completion);
+ mutex_unlock(&rcu_barrier_mutex);
+}
+
+/**
+ * rcu_barrier_bh - Wait until all in-flight call_rcu_bh() callbacks complete.
+ */
+void rcu_barrier_bh(void)
+{
+ _rcu_barrier(&rcu_bh_state, call_rcu_bh);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_bh);
+
+/**
+ * rcu_barrier_sched - Wait for in-flight call_rcu_sched() callbacks.
+ */
+void rcu_barrier_sched(void)
+{
+ _rcu_barrier(&rcu_sched_state, call_rcu_sched);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier_sched);
+
/*
* Do boot-time initialization of a CPU's per-CPU RCU data.
*/
rdp->beenonline = 1; /* We have now been online. */
rdp->preemptable = preemptable;
rdp->passed_quiesc_completed = lastcomp - 1;
+ rdp->qlen_last_fqs_check = 0;
+ rdp->n_force_qs_snap = rsp->n_force_qs;
rdp->blimit = blimit;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
case CPU_UP_PREPARE_FROZEN:
rcu_online_cpu(cpu);
break;
+ case CPU_DYING:
+ case CPU_DYING_FROZEN:
+ /*
+ * preempt_disable() in _rcu_barrier() prevents stop_machine(),
+ * so when "on_each_cpu(rcu_barrier_func, (void *)type, 1);"
+ * returns, all online cpus have queued rcu_barrier_func().
+ * The dying CPU clears its cpu_online_mask bit and
+ * moves all of its RCU callbacks to ->orphan_cbs_list
+ * in the context of stop_machine(), so subsequent calls
+ * to _rcu_barrier() will adopt these callbacks and only
+ * then queue rcu_barrier_func() on all remaining CPUs.
+ */
+ rcu_send_cbs_to_orphanage(&rcu_bh_state);
+ rcu_send_cbs_to_orphanage(&rcu_sched_state);
+ rcu_preempt_send_cbs_to_orphanage();
+ break;
case CPU_DEAD:
case CPU_DEAD_FROZEN:
case CPU_UP_CANCELED:
cpustride *= rsp->levelspread[i];
rnp = rsp->level[i];
for (j = 0; j < rsp->levelcnt[i]; j++, rnp++) {
- spin_lock_init(&rnp->lock);
+ if (rnp != rcu_get_root(rsp))
+ spin_lock_init(&rnp->lock);
rnp->gpnum = 0;
rnp->qsmask = 0;
rnp->qsmaskinit = 0;
INIT_LIST_HEAD(&rnp->blocked_tasks[1]);
}
}
+ spin_lock_init(&rcu_get_root(rsp)->lock);
}
/*
*/
#define RCU_INIT_FLAVOR(rsp, rcu_data) \
do { \
+ int i; \
+ int j; \
+ struct rcu_node *rnp; \
+ \
rcu_init_one(rsp); \
rnp = (rsp)->level[NUM_RCU_LVLS - 1]; \
j = 0; \
} \
} while (0)
-#ifdef CONFIG_TREE_PREEMPT_RCU
-
-void __init __rcu_init_preempt(void)
-{
- int i; /* All used by RCU_INIT_FLAVOR(). */
- int j;
- struct rcu_node *rnp;
-
- RCU_INIT_FLAVOR(&rcu_preempt_state, rcu_preempt_data);
-}
-
-#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-
-void __init __rcu_init_preempt(void)
-{
-}
-
-#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
-
void __init __rcu_init(void)
{
- int i; /* All used by RCU_INIT_FLAVOR(). */
- int j;
- struct rcu_node *rnp;
-
rcu_bootup_announce();
#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
printk(KERN_INFO "RCU-based detection of stalled CPUs is enabled.\n");
open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
}
-module_param(blimit, int, 0);
-module_param(qhimark, int, 0);
-module_param(qlowmark, int, 0);
+#include "rcutree_plugin.h"
#elif NR_CPUS <= RCU_FANOUT_SQ
# define NUM_RCU_LVLS 2
# define NUM_RCU_LVL_0 1
-# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT - 1) / RCU_FANOUT)
+# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
# define NUM_RCU_LVL_2 (NR_CPUS)
# define NUM_RCU_LVL_3 0
#elif NR_CPUS <= RCU_FANOUT_CUBE
# define NUM_RCU_LVLS 3
# define NUM_RCU_LVL_0 1
-# define NUM_RCU_LVL_1 (((NR_CPUS) + RCU_FANOUT_SQ - 1) / RCU_FANOUT_SQ)
-# define NUM_RCU_LVL_2 (((NR_CPUS) + (RCU_FANOUT) - 1) / (RCU_FANOUT))
+# define NUM_RCU_LVL_1 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT_SQ)
+# define NUM_RCU_LVL_2 DIV_ROUND_UP(NR_CPUS, RCU_FANOUT)
# define NUM_RCU_LVL_3 NR_CPUS
#else
# error "CONFIG_RCU_FANOUT insufficient for NR_CPUS"
* Definition for node within the RCU grace-period-detection hierarchy.
*/
struct rcu_node {
- spinlock_t lock;
+ spinlock_t lock; /* Root rcu_node's lock protects some */
+ /* rcu_state fields as well as following. */
long gpnum; /* Current grace period for this node. */
/* This will either be equal to or one */
/* behind the root rcu_node's gpnum. */
unsigned long qsmask; /* CPUs or groups that need to switch in */
/* order for current grace period to proceed.*/
+ /* In leaf rcu_node, each bit corresponds to */
+ /* an rcu_data structure, otherwise, each */
+ /* bit corresponds to a child rcu_node */
+ /* structure. */
unsigned long qsmaskinit;
/* Per-GP initialization for qsmask. */
unsigned long grpmask; /* Mask to apply to parent qsmask. */
+ /* Only one bit will be set in this mask. */
int grplo; /* lowest-numbered CPU or group here. */
int grphi; /* highest-numbered CPU or group here. */
u8 grpnum; /* CPU/group number for next level up. */
struct rcu_node *parent;
struct list_head blocked_tasks[2];
/* Tasks blocked in RCU read-side critsect. */
+ /* Grace period number (->gpnum) x blocked */
+ /* by tasks on the (x & 0x1) element of the */
+ /* blocked_tasks[] array. */
} ____cacheline_internodealigned_in_smp;
+/*
+ * Do a full breadth-first scan of the rcu_node structures for the
+ * specified rcu_state structure.
+ */
+#define rcu_for_each_node_breadth_first(rsp, rnp) \
+ for ((rnp) = &(rsp)->node[0]; \
+ (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++)
+
+#define rcu_for_each_leaf_node(rsp, rnp) \
+ for ((rnp) = (rsp)->level[NUM_RCU_LVLS - 1]; \
+ (rnp) < &(rsp)->node[NUM_RCU_NODES]; (rnp)++)
+
/* Index values for nxttail array in struct rcu_data. */
#define RCU_DONE_TAIL 0 /* Also RCU_WAIT head. */
#define RCU_WAIT_TAIL 1 /* Also RCU_NEXT_READY head. */
* Any of the partitions might be empty, in which case the
* pointer to that partition will be equal to the pointer for
* the following partition. When the list is empty, all of
- * the nxttail elements point to nxtlist, which is NULL.
+ * the nxttail elements point to the ->nxtlist pointer itself,
+ * which in that case is NULL.
*
- * [*nxttail[RCU_NEXT_READY_TAIL], NULL = *nxttail[RCU_NEXT_TAIL]):
- * Entries that might have arrived after current GP ended
- * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]):
- * Entries known to have arrived before current GP ended
- * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]):
- * Entries that batch # <= ->completed - 1: waiting for current GP
* [nxtlist, *nxttail[RCU_DONE_TAIL]):
* Entries that batch # <= ->completed
* The grace period for these entries has completed, and
* the other grace-period-completed entries may be moved
* here temporarily in rcu_process_callbacks().
+ * [*nxttail[RCU_DONE_TAIL], *nxttail[RCU_WAIT_TAIL]):
+ * Entries that batch # <= ->completed - 1: waiting for current GP
+ * [*nxttail[RCU_WAIT_TAIL], *nxttail[RCU_NEXT_READY_TAIL]):
+ * Entries known to have arrived before current GP ended
+ * [*nxttail[RCU_NEXT_READY_TAIL], *nxttail[RCU_NEXT_TAIL]):
+ * Entries that might have arrived after current GP ended
+ * Note that the value of *nxttail[RCU_NEXT_TAIL] will
+ * always be NULL, as this is the end of the list.
*/
struct rcu_head *nxtlist;
struct rcu_head **nxttail[RCU_NEXT_SIZE];
long qlen; /* # of queued callbacks */
+ long qlen_last_fqs_check;
+ /* qlen at last check for QS forcing */
+ unsigned long n_force_qs_snap;
+ /* did other CPU force QS recently? */
long blimit; /* Upper limit on a processed batch */
#ifdef CONFIG_NO_HZ
/* Force QS state. */
long gpnum; /* Current gp number. */
long completed; /* # of last completed gp. */
+
+ /* End of fields guarded by root rcu_node's lock. */
+
spinlock_t onofflock; /* exclude on/offline and */
- /* starting new GP. */
+ /* starting new GP. Also */
+ /* protects the following */
+ /* orphan_cbs fields. */
+ struct rcu_head *orphan_cbs_list; /* list of rcu_head structs */
+ /* orphaned by all CPUs in */
+ /* a given leaf rcu_node */
+ /* going offline. */
+ struct rcu_head **orphan_cbs_tail; /* And tail pointer. */
+ long orphan_qlen; /* Number of orphaned cbs. */
spinlock_t fqslock; /* Only one task forcing */
/* quiescent states. */
unsigned long jiffies_force_qs; /* Time at which to invoke */
DECLARE_PER_CPU(struct rcu_data, rcu_preempt_data);
#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-#endif /* #ifdef RCU_TREE_NONCORE */
+#else /* #ifdef RCU_TREE_NONCORE */
+
+/* Forward declarations for rcutree_plugin.h */
+static inline void rcu_bootup_announce(void);
+long rcu_batches_completed(void);
+static void rcu_preempt_note_context_switch(int cpu);
+static int rcu_preempted_readers(struct rcu_node *rnp);
+#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
+static void rcu_print_task_stall(struct rcu_node *rnp);
+#endif /* #ifdef CONFIG_RCU_CPU_STALL_DETECTOR */
+static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
+#ifdef CONFIG_HOTPLUG_CPU
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp);
+static void rcu_preempt_offline_cpu(int cpu);
+#endif /* #ifdef CONFIG_HOTPLUG_CPU */
+static void rcu_preempt_check_callbacks(int cpu);
+static void rcu_preempt_process_callbacks(void);
+void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
+static int rcu_preempt_pending(int cpu);
+static int rcu_preempt_needs_cpu(int cpu);
+static void __cpuinit rcu_preempt_init_percpu_data(int cpu);
+static void rcu_preempt_send_cbs_to_orphanage(void);
+static void __init __rcu_init_preempt(void);
+#endif /* #else #ifdef RCU_TREE_NONCORE */
}
EXPORT_SYMBOL_GPL(__rcu_read_lock);
+/*
+ * Check for preempted RCU readers blocking the current grace period
+ * for the specified rcu_node structure. If the caller needs a reliable
+ * answer, it must hold the rcu_node's ->lock.
+ */
+static int rcu_preempted_readers(struct rcu_node *rnp)
+{
+ return !list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+}
+
static void rcu_read_unlock_special(struct task_struct *t)
{
int empty;
break;
spin_unlock(&rnp->lock); /* irqs remain disabled. */
}
- empty = list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
+ empty = !rcu_preempted_readers(rnp);
list_del_init(&t->rcu_node_entry);
t->rcu_blocked_node = NULL;
* drop rnp->lock and restore irq.
*/
if (!empty && rnp->qsmask == 0 &&
- list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1])) {
+ !rcu_preempted_readers(rnp)) {
struct rcu_node *rnp_p;
if (rnp->parent == NULL) {
{
unsigned long flags;
struct list_head *lp;
- int phase = rnp->gpnum & 0x1;
+ int phase;
struct task_struct *t;
- if (!list_empty(&rnp->blocked_tasks[phase])) {
+ if (rcu_preempted_readers(rnp)) {
spin_lock_irqsave(&rnp->lock, flags);
- phase = rnp->gpnum & 0x1; /* re-read under lock. */
+ phase = rnp->gpnum & 0x1;
lp = &rnp->blocked_tasks[phase];
list_for_each_entry(t, lp, rcu_node_entry)
printk(" P%d", t->pid);
*/
static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp)
{
- WARN_ON_ONCE(!list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]));
+ WARN_ON_ONCE(rcu_preempted_readers(rnp));
WARN_ON_ONCE(rnp->qsmask);
}
-/*
- * Check for preempted RCU readers for the specified rcu_node structure.
- * If the caller needs a reliable answer, it must hold the rcu_node's
- * >lock.
- */
-static int rcu_preempted_readers(struct rcu_node *rnp)
-{
- return !list_empty(&rnp->blocked_tasks[rnp->gpnum & 0x1]);
-}
-
#ifdef CONFIG_HOTPLUG_CPU
/*
* parent is to remove the need for rcu_read_unlock_special() to
* make more than two attempts to acquire the target rcu_node's lock.
*
+ * Returns 1 if there was previously a task blocking the current grace
+ * period on the specified rcu_node structure.
+ *
* The caller must hold rnp->lock with irqs disabled.
*/
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
- struct rcu_node *rnp,
- struct rcu_data *rdp)
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp)
{
int i;
struct list_head *lp;
struct list_head *lp_root;
+ int retval = rcu_preempted_readers(rnp);
struct rcu_node *rnp_root = rcu_get_root(rsp);
struct task_struct *tp;
if (rnp == rnp_root) {
WARN_ONCE(1, "Last CPU thought to be offlined?");
- return; /* Shouldn't happen: at least one CPU online. */
+ return 0; /* Shouldn't happen: at least one CPU online. */
}
WARN_ON_ONCE(rnp != rdp->mynode &&
(!list_empty(&rnp->blocked_tasks[0]) ||
spin_unlock(&rnp_root->lock); /* irqs remain disabled */
}
}
+
+ return retval;
}
/*
}
EXPORT_SYMBOL_GPL(call_rcu);
+/*
+ * Wait for an rcu-preempt grace period. We are supposed to expedite the
+ * grace period, but this is the crude slow compatability hack, so just
+ * invoke synchronize_rcu().
+ */
+void synchronize_rcu_expedited(void)
+{
+ synchronize_rcu();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
+
/*
* Check to see if there is any immediate preemptable-RCU-related work
* to be done.
return !!per_cpu(rcu_preempt_data, cpu).nxtlist;
}
+/**
+ * rcu_barrier - Wait until all in-flight call_rcu() callbacks complete.
+ */
+void rcu_barrier(void)
+{
+ _rcu_barrier(&rcu_preempt_state, call_rcu);
+}
+EXPORT_SYMBOL_GPL(rcu_barrier);
+
/*
* Initialize preemptable RCU's per-CPU data.
*/
rcu_init_percpu_data(cpu, &rcu_preempt_state, 1);
}
+/*
+ * Move preemptable RCU's callbacks to ->orphan_cbs_list.
+ */
+static void rcu_preempt_send_cbs_to_orphanage(void)
+{
+ rcu_send_cbs_to_orphanage(&rcu_preempt_state);
+}
+
+/*
+ * Initialize preemptable RCU's state structures.
+ */
+static void __init __rcu_init_preempt(void)
+{
+ RCU_INIT_FLAVOR(&rcu_preempt_state, rcu_preempt_data);
+}
+
/*
* Check for a task exiting while in a preemptable-RCU read-side
* critical section, clean up if so. No need to issue warnings,
{
}
+/*
+ * Because preemptable RCU does not exist, there are never any preempted
+ * RCU readers.
+ */
+static int rcu_preempted_readers(struct rcu_node *rnp)
+{
+ return 0;
+}
+
#ifdef CONFIG_RCU_CPU_STALL_DETECTOR
/*
WARN_ON_ONCE(rnp->qsmask);
}
-/*
- * Because preemptable RCU does not exist, there are never any preempted
- * RCU readers.
- */
-static int rcu_preempted_readers(struct rcu_node *rnp)
-{
- return 0;
-}
-
#ifdef CONFIG_HOTPLUG_CPU
/*
* Because preemptable RCU does not exist, it never needs to migrate
- * tasks that were blocked within RCU read-side critical sections.
+ * tasks that were blocked within RCU read-side critical sections, and
+ * such non-existent tasks cannot possibly have been blocking the current
+ * grace period.
*/
-static void rcu_preempt_offline_tasks(struct rcu_state *rsp,
- struct rcu_node *rnp,
- struct rcu_data *rdp)
+static int rcu_preempt_offline_tasks(struct rcu_state *rsp,
+ struct rcu_node *rnp,
+ struct rcu_data *rdp)
{
+ return 0;
}
/*
* Because preemptable RCU does not exist, it never has any callbacks
* to check.
*/
-void rcu_preempt_check_callbacks(int cpu)
+static void rcu_preempt_check_callbacks(int cpu)
{
}
* Because preemptable RCU does not exist, it never has any callbacks
* to process.
*/
-void rcu_preempt_process_callbacks(void)
+static void rcu_preempt_process_callbacks(void)
{
}
}
EXPORT_SYMBOL_GPL(call_rcu);
+/*
+ * Wait for an rcu-preempt grace period, but make it happen quickly.
+ * But because preemptable RCU does not exist, map to rcu-sched.
+ */
+void synchronize_rcu_expedited(void)
+{
+ synchronize_sched_expedited();
+}
+EXPORT_SYMBOL_GPL(synchronize_rcu_expedited);
+
/*
* Because preemptable RCU does not exist, it never has any work to do.
*/
return 0;
}
+/*
+ * Because preemptable RCU does not exist, rcu_barrier() is just
+ * another name for rcu_barrier_sched().
+ */
+void rcu_barrier(void)
+{
+ rcu_barrier_sched();
+}
+EXPORT_SYMBOL_GPL(rcu_barrier);
+
/*
* Because preemptable RCU does not exist, there is no per-CPU
* data to initialize.
{
}
+/*
+ * Because there is no preemptable RCU, there are no callbacks to move.
+ */
+static void rcu_preempt_send_cbs_to_orphanage(void)
+{
+}
+
+/*
+ * Because preemptable RCU does not exist, it need not be initialized.
+ */
+static void __init __rcu_init_preempt(void)
+{
+}
+
#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
return single_open(file, show_rcudata, NULL);
}
-static struct file_operations rcudata_fops = {
+static const struct file_operations rcudata_fops = {
.owner = THIS_MODULE,
.open = rcudata_open,
.read = seq_read,
return single_open(file, show_rcudata_csv, NULL);
}
-static struct file_operations rcudata_csv_fops = {
+static const struct file_operations rcudata_csv_fops = {
.owner = THIS_MODULE,
.open = rcudata_csv_open,
.read = seq_read,
struct rcu_node *rnp;
seq_printf(m, "c=%ld g=%ld s=%d jfq=%ld j=%x "
- "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu\n",
+ "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu oqlen=%ld\n",
rsp->completed, rsp->gpnum, rsp->signaled,
(long)(rsp->jiffies_force_qs - jiffies),
(int)(jiffies & 0xffff),
rsp->n_force_qs, rsp->n_force_qs_ngp,
rsp->n_force_qs - rsp->n_force_qs_ngp,
- rsp->n_force_qs_lh);
+ rsp->n_force_qs_lh, rsp->orphan_qlen);
for (rnp = &rsp->node[0]; rnp - &rsp->node[0] < NUM_RCU_NODES; rnp++) {
if (rnp->level != level) {
seq_puts(m, "\n");
return single_open(file, show_rcuhier, NULL);
}
-static struct file_operations rcuhier_fops = {
+static const struct file_operations rcuhier_fops = {
.owner = THIS_MODULE,
.open = rcuhier_open,
.read = seq_read,
return single_open(file, show_rcugp, NULL);
}
-static struct file_operations rcugp_fops = {
+static const struct file_operations rcugp_fops = {
.owner = THIS_MODULE,
.open = rcugp_open,
.read = seq_read,
return single_open(file, show_rcu_pending, NULL);
}
-static struct file_operations rcu_pending_fops = {
+static const struct file_operations rcu_pending_fops = {
.owner = THIS_MODULE,
.open = rcu_pending_open,
.read = seq_read,
/*
* vm_ops for relay file mappings.
*/
-static struct vm_operations_struct relay_file_mmap_ops = {
+static const struct vm_operations_struct relay_file_mmap_ops = {
.fault = relay_buf_fault,
.close = relay_file_mmap_close,
};
{
spin_lock_init(&counter->lock);
counter->limit = RESOURCE_MAX;
+ counter->soft_limit = RESOURCE_MAX;
counter->parent = parent;
}
return &counter->limit;
case RES_FAILCNT:
return &counter->failcnt;
+ case RES_SOFT_LIMIT:
+ return &counter->soft_limit;
};
BUG();
/**
* runqueue_is_locked
+ * @cpu: the processor in question.
*
* Returns true if the current cpu runqueue is locked.
* This interface allows printk to be called with the runqueue lock
return single_open(filp, sched_feat_show, NULL);
}
-static struct file_operations sched_feat_fops = {
+static const struct file_operations sched_feat_fops = {
.open = sched_feat_open,
.write = sched_feat_write,
.read = seq_read,
#ifdef CONFIG_FAIR_GROUP_SCHED
-struct update_shares_data {
- unsigned long rq_weight[NR_CPUS];
-};
-
-static DEFINE_PER_CPU(struct update_shares_data, update_shares_data);
+static __read_mostly unsigned long *update_shares_data;
static void __set_se_shares(struct sched_entity *se, unsigned long shares);
static void update_group_shares_cpu(struct task_group *tg, int cpu,
unsigned long sd_shares,
unsigned long sd_rq_weight,
- struct update_shares_data *usd)
+ unsigned long *usd_rq_weight)
{
unsigned long shares, rq_weight;
int boost = 0;
- rq_weight = usd->rq_weight[cpu];
+ rq_weight = usd_rq_weight[cpu];
if (!rq_weight) {
boost = 1;
rq_weight = NICE_0_LOAD;
static int tg_shares_up(struct task_group *tg, void *data)
{
unsigned long weight, rq_weight = 0, shares = 0;
- struct update_shares_data *usd;
+ unsigned long *usd_rq_weight;
struct sched_domain *sd = data;
unsigned long flags;
int i;
return 0;
local_irq_save(flags);
- usd = &__get_cpu_var(update_shares_data);
+ usd_rq_weight = per_cpu_ptr(update_shares_data, smp_processor_id());
for_each_cpu(i, sched_domain_span(sd)) {
weight = tg->cfs_rq[i]->load.weight;
- usd->rq_weight[i] = weight;
+ usd_rq_weight[i] = weight;
/*
* If there are currently no tasks on the cpu pretend there
shares = tg->shares;
for_each_cpu(i, sched_domain_span(sd))
- update_group_shares_cpu(tg, i, shares, rq_weight, usd);
+ update_group_shares_cpu(tg, i, shares, rq_weight, usd_rq_weight);
local_irq_restore(flags);
p->sched_class->prio_changed(rq, p, oldprio, running);
}
+/**
+ * kthread_bind - bind a just-created kthread to a cpu.
+ * @k: thread created by kthread_create().
+ * @cpu: cpu (might not be online, must be possible) for @k to run on.
+ *
+ * Description: This function is equivalent to set_cpus_allowed(),
+ * except that @cpu doesn't need to be online, and the thread must be
+ * stopped (i.e., just returned from kthread_create()).
+ *
+ * Function lives here instead of kthread.c because it messes with
+ * scheduler internals which require locking.
+ */
+void kthread_bind(struct task_struct *p, unsigned int cpu)
+{
+ struct rq *rq = cpu_rq(cpu);
+ unsigned long flags;
+
+ /* Must have done schedule() in kthread() before we set_task_cpu */
+ if (!wait_task_inactive(p, TASK_UNINTERRUPTIBLE)) {
+ WARN_ON(1);
+ return;
+ }
+
+ spin_lock_irqsave(&rq->lock, flags);
+ set_task_cpu(p, cpu);
+ p->cpus_allowed = cpumask_of_cpu(cpu);
+ p->rt.nr_cpus_allowed = 1;
+ p->flags |= PF_THREAD_BOUND;
+ spin_unlock_irqrestore(&rq->lock, flags);
+}
+EXPORT_SYMBOL(kthread_bind);
+
#ifdef CONFIG_SMP
/*
* Is this task likely cache-hot:
/*
* Buddy candidates are cache hot:
*/
- if (sched_feat(CACHE_HOT_BUDDY) &&
+ if (sched_feat(CACHE_HOT_BUDDY) && this_rq()->nr_running &&
(&p->se == cfs_rq_of(&p->se)->next ||
&p->se == cfs_rq_of(&p->se)->last))
return 1;
{
int cpu, orig_cpu, this_cpu, success = 0;
unsigned long flags;
- struct rq *rq;
+ struct rq *rq, *orig_rq;
if (!sched_feat(SYNC_WAKEUPS))
wake_flags &= ~WF_SYNC;
this_cpu = get_cpu();
smp_wmb();
- rq = task_rq_lock(p, &flags);
+ rq = orig_rq = task_rq_lock(p, &flags);
update_rq_clock(rq);
if (!(p->state & state))
goto out;
set_task_cpu(p, cpu);
rq = task_rq_lock(p, &flags);
+
+ if (rq != orig_rq)
+ update_rq_clock(rq);
+
WARN_ON(p->state != TASK_WAKING);
cpu = task_cpu(p);
__sched_fork(p);
- /*
- * Make sure we do not leak PI boosting priority to the child.
- */
- p->prio = current->normal_prio;
-
/*
* Revert to default priority/policy on fork if requested.
*/
if (unlikely(p->sched_reset_on_fork)) {
- if (p->policy == SCHED_FIFO || p->policy == SCHED_RR)
+ if (p->policy == SCHED_FIFO || p->policy == SCHED_RR) {
p->policy = SCHED_NORMAL;
-
- if (p->normal_prio < DEFAULT_PRIO)
- p->prio = DEFAULT_PRIO;
+ p->normal_prio = p->static_prio;
+ }
if (PRIO_TO_NICE(p->static_prio) < 0) {
p->static_prio = NICE_TO_PRIO(0);
+ p->normal_prio = p->static_prio;
set_load_weight(p);
}
p->sched_reset_on_fork = 0;
}
+ /*
+ * Make sure we do not leak PI boosting priority to the child.
+ */
+ p->prio = current->normal_prio;
+
if (!rt_prio(p->prio))
p->sched_class = &fair_sched_class;
BUG_ON(p->state != TASK_RUNNING);
update_rq_clock(rq);
- p->prio = effective_prio(p);
-
if (!p->sched_class->task_new || !current->se.on_rq) {
activate_task(rq, p, 0);
} else {
/**
* update_sg_lb_stats - Update sched_group's statistics for load balancing.
+ * @sd: The sched_domain whose statistics are to be updated.
* @group: sched_group whose statistics are to be updated.
* @this_cpu: Cpu for which load balance is currently performed.
* @idle: Idle status of this_cpu
/*
* This task is about to go to sleep on IO. Increment rq->nr_iowait so
* that process accounting knows that this is a task in IO wait state.
- *
- * But don't do that if it is a deliberate, throttling IO wait (this task
- * has set its backing_dev_info: the queue against which it should throttle)
*/
void __sched io_schedule(void)
{
#endif /* CONFIG_USER_SCHED */
#endif /* CONFIG_GROUP_SCHED */
+#if defined CONFIG_FAIR_GROUP_SCHED && defined CONFIG_SMP
+ update_shares_data = __alloc_percpu(nr_cpu_ids * sizeof(unsigned long),
+ __alignof__(unsigned long));
+#endif
for_each_possible_cpu(i) {
struct rq *rq;
current->sched_class = &fair_sched_class;
/* Allocate the nohz_cpu_mask if CONFIG_CPUMASK_OFFSTACK */
- alloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
+ zalloc_cpumask_var(&nohz_cpu_mask, GFP_NOWAIT);
#ifdef CONFIG_SMP
#ifdef CONFIG_NO_HZ
- alloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
+ zalloc_cpumask_var(&nohz.cpu_mask, GFP_NOWAIT);
alloc_cpumask_var(&nohz.ilb_grp_nohz_mask, GFP_NOWAIT);
#endif
- alloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
+ zalloc_cpumask_var(&cpu_isolated_map, GFP_NOWAIT);
#endif /* SMP */
perf_event_init();
#endif /* CONFIG_RT_GROUP_SCHED */
int sched_rt_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
old_period = sysctl_sched_rt_period;
old_runtime = sysctl_sched_rt_runtime;
- ret = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (!ret && write) {
ret = sched_rt_global_constraints();
}
static int
-cpu_cgroup_can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct task_struct *tsk)
+cpu_cgroup_can_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
{
#ifdef CONFIG_RT_GROUP_SCHED
if (!sched_rt_can_attach(cgroup_tg(cgrp), tsk))
if (tsk->sched_class != &fair_sched_class)
return -EINVAL;
#endif
+ return 0;
+}
+static int
+cpu_cgroup_can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
+ struct task_struct *tsk, bool threadgroup)
+{
+ int retval = cpu_cgroup_can_attach_task(cgrp, tsk);
+ if (retval)
+ return retval;
+ if (threadgroup) {
+ struct task_struct *c;
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
+ retval = cpu_cgroup_can_attach_task(cgrp, c);
+ if (retval) {
+ rcu_read_unlock();
+ return retval;
+ }
+ }
+ rcu_read_unlock();
+ }
return 0;
}
static void
cpu_cgroup_attach(struct cgroup_subsys *ss, struct cgroup *cgrp,
- struct cgroup *old_cont, struct task_struct *tsk)
+ struct cgroup *old_cont, struct task_struct *tsk,
+ bool threadgroup)
{
sched_move_task(tsk);
+ if (threadgroup) {
+ struct task_struct *c;
+ rcu_read_lock();
+ list_for_each_entry_rcu(c, &tsk->thread_group, thread_group) {
+ sched_move_task(c);
+ }
+ rcu_read_unlock();
+ }
}
#ifdef CONFIG_FAIR_GROUP_SCHED
clock = wrap_max(clock, min_clock);
clock = wrap_min(clock, max_clock);
- if (cmpxchg(&scd->clock, old_clock, clock) != old_clock)
+ if (cmpxchg64(&scd->clock, old_clock, clock) != old_clock)
goto again;
return clock;
val = remote_clock;
}
- if (cmpxchg(ptr, old_val, val) != old_val)
+ if (cmpxchg64(ptr, old_val, val) != old_val)
goto again;
return val;
#ifdef CONFIG_SCHED_DEBUG
int sched_nr_latency_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
- int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (ret || !write)
return ret;
* re-elected due to buddy favours.
*/
clear_buddies(cfs_rq, curr);
+ return;
+ }
+
+ /*
+ * Ensure that a task that missed wakeup preemption by a
+ * narrow margin doesn't have to wait for a full slice.
+ * This also mitigates buddy induced latencies under load.
+ */
+ if (!sched_feat(WAKEUP_PREEMPT))
+ return;
+
+ if (delta_exec < sysctl_sched_min_granularity)
+ return;
+
+ if (cfs_rq->nr_running > 1) {
+ struct sched_entity *se = __pick_next_entity(cfs_rq);
+ s64 delta = curr->vruntime - se->vruntime;
+
+ if (delta > ideal_runtime)
+ resched_task(rq_of(cfs_rq)->curr);
}
}
static struct sched_entity *pick_next_entity(struct cfs_rq *cfs_rq)
{
struct sched_entity *se = __pick_next_entity(cfs_rq);
+ struct sched_entity *left = se;
- if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, se) < 1)
- return cfs_rq->next;
+ if (cfs_rq->next && wakeup_preempt_entity(cfs_rq->next, left) < 1)
+ se = cfs_rq->next;
- if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, se) < 1)
- return cfs_rq->last;
+ /*
+ * Prefer last buddy, try to return the CPU to a preempted task.
+ */
+ if (cfs_rq->last && wakeup_preempt_entity(cfs_rq->last, left) < 1)
+ se = cfs_rq->last;
+
+ clear_buddies(cfs_rq, se);
return se;
}
struct sched_entity *se = &curr->se, *pse = &p->se;
struct cfs_rq *cfs_rq = task_cfs_rq(curr);
int sync = wake_flags & WF_SYNC;
+ int scale = cfs_rq->nr_running >= sched_nr_latency;
update_curr(cfs_rq);
if (unlikely(se == pse))
return;
- /*
- * Only set the backward buddy when the current task is still on the
- * rq. This can happen when a wakeup gets interleaved with schedule on
- * the ->pre_schedule() or idle_balance() point, either of which can
- * drop the rq lock.
- *
- * Also, during early boot the idle thread is in the fair class, for
- * obvious reasons its a bad idea to schedule back to the idle thread.
- */
- if (sched_feat(LAST_BUDDY) && likely(se->on_rq && curr != rq->idle))
- set_last_buddy(se);
- if (sched_feat(NEXT_BUDDY) && !(wake_flags & WF_FORK))
+ if (sched_feat(NEXT_BUDDY) && scale && !(wake_flags & WF_FORK))
set_next_buddy(pse);
/*
BUG_ON(!pse);
- if (wakeup_preempt_entity(se, pse) == 1)
+ if (wakeup_preempt_entity(se, pse) == 1) {
resched_task(curr);
+ /*
+ * Only set the backward buddy when the current task is still
+ * on the rq. This can happen when a wakeup gets interleaved
+ * with schedule on the ->pre_schedule() or idle_balance()
+ * point, either of which can * drop the rq lock.
+ *
+ * Also, during early boot the idle thread is in the fair class,
+ * for obvious reasons its a bad idea to schedule back to it.
+ */
+ if (unlikely(!se->on_rq || curr == rq->idle))
+ return;
+ if (sched_feat(LAST_BUDDY) && scale && entity_is_task(se))
+ set_last_buddy(se);
+ }
}
static struct task_struct *pick_next_task_fair(struct rq *rq)
do {
se = pick_next_entity(cfs_rq);
- /*
- * If se was a buddy, clear it so that it will have to earn
- * the favour again.
- *
- * If se was not a buddy, clear the buddies because neither
- * was elegible to run, let them earn it again.
- *
- * IOW. unconditionally clear buddies.
- */
- __clear_buddies(cfs_rq, NULL);
set_next_entity(cfs_rq, se);
cfs_rq = group_cfs_rq(se);
} while (cfs_rq);
if (why) {
/*
- * The first thread which returns from finish_stop()
+ * The first thread which returns from do_signal_stop()
* will take ->siglock, notice SIGNAL_CLD_MASK, and
* notify its parent. See get_signal_to_deliver().
*/
return send_signal(sig, info, t, 0);
}
+int do_send_sig_info(int sig, struct siginfo *info, struct task_struct *p,
+ bool group)
+{
+ unsigned long flags;
+ int ret = -ESRCH;
+
+ if (lock_task_sighand(p, &flags)) {
+ ret = send_signal(sig, info, p, group);
+ unlock_task_sighand(p, &flags);
+ }
+
+ return ret;
+}
+
/*
* Force a signal that the process can't ignore: if necessary
* we unblock the signal and change any SIG_IGN to SIG_DFL.
}
}
-int __fatal_signal_pending(struct task_struct *tsk)
-{
- return sigismember(&tsk->pending.signal, SIGKILL);
-}
-EXPORT_SYMBOL(__fatal_signal_pending);
-
struct sighand_struct *lock_task_sighand(struct task_struct *tsk, unsigned long *flags)
{
struct sighand_struct *sighand;
*/
int group_send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
{
- unsigned long flags;
- int ret;
+ int ret = check_kill_permission(sig, info, p);
- ret = check_kill_permission(sig, info, p);
-
- if (!ret && sig) {
- ret = -ESRCH;
- if (lock_task_sighand(p, &flags)) {
- ret = __group_send_sig_info(sig, info, p);
- unlock_task_sighand(p, &flags);
- }
- }
+ if (!ret && sig)
+ ret = do_send_sig_info(sig, info, p, true);
return ret;
}
* These are for backward compatibility with the rest of the kernel source.
*/
-/*
- * The caller must ensure the task can't exit.
- */
int
send_sig_info(int sig, struct siginfo *info, struct task_struct *p)
{
- int ret;
- unsigned long flags;
-
/*
* Make sure legacy kernel users don't send in bad values
* (normal paths check this in check_kill_permission).
if (!valid_signal(sig))
return -EINVAL;
- spin_lock_irqsave(&p->sighand->siglock, flags);
- ret = specific_send_sig_info(sig, info, p);
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
- return ret;
+ return do_send_sig_info(sig, info, p, false);
}
#define __si_special(priv) \
return ret;
}
-/*
- * Wake up any threads in the parent blocked in wait* syscalls.
- */
-static inline void __wake_up_parent(struct task_struct *p,
- struct task_struct *parent)
-{
- wake_up_interruptible_sync(&parent->signal->wait_chldexit);
-}
-
/*
* Let a parent know about the death of a child.
* For a stopped/continued status change, use do_notify_parent_cldstop instead.
spin_unlock_irq(¤t->sighand->siglock);
}
-static void
-finish_stop(int stop_count)
-{
- /*
- * If there are no other threads in the group, or if there is
- * a group stop in progress and we are the last to stop,
- * report to the parent. When ptraced, every thread reports itself.
- */
- if (tracehook_notify_jctl(stop_count == 0, CLD_STOPPED)) {
- read_lock(&tasklist_lock);
- do_notify_parent_cldstop(current, CLD_STOPPED);
- read_unlock(&tasklist_lock);
- }
-
- do {
- schedule();
- } while (try_to_freeze());
- /*
- * Now we don't run again until continued.
- */
- current->exit_code = 0;
-}
-
/*
* This performs the stopping for SIGSTOP and other stop signals.
* We have to stop all threads in the thread group.
static int do_signal_stop(int signr)
{
struct signal_struct *sig = current->signal;
- int stop_count;
+ int notify;
- if (sig->group_stop_count > 0) {
- /*
- * There is a group stop in progress. We don't need to
- * start another one.
- */
- stop_count = --sig->group_stop_count;
- } else {
+ if (!sig->group_stop_count) {
struct task_struct *t;
if (!likely(sig->flags & SIGNAL_STOP_DEQUEUED) ||
*/
sig->group_exit_code = signr;
- stop_count = 0;
+ sig->group_stop_count = 1;
for (t = next_thread(current); t != current; t = next_thread(t))
/*
* Setting state to TASK_STOPPED for a group
*/
if (!(t->flags & PF_EXITING) &&
!task_is_stopped_or_traced(t)) {
- stop_count++;
+ sig->group_stop_count++;
signal_wake_up(t, 0);
}
- sig->group_stop_count = stop_count;
}
+ /*
+ * If there are no other threads in the group, or if there is
+ * a group stop in progress and we are the last to stop, report
+ * to the parent. When ptraced, every thread reports itself.
+ */
+ notify = sig->group_stop_count == 1 ? CLD_STOPPED : 0;
+ notify = tracehook_notify_jctl(notify, CLD_STOPPED);
+ /*
+ * tracehook_notify_jctl() can drop and reacquire siglock, so
+ * we keep ->group_stop_count != 0 before the call. If SIGCONT
+ * or SIGKILL comes in between ->group_stop_count == 0.
+ */
+ if (sig->group_stop_count) {
+ if (!--sig->group_stop_count)
+ sig->flags = SIGNAL_STOP_STOPPED;
+ current->exit_code = sig->group_exit_code;
+ __set_current_state(TASK_STOPPED);
+ }
+ spin_unlock_irq(¤t->sighand->siglock);
- if (stop_count == 0)
- sig->flags = SIGNAL_STOP_STOPPED;
- current->exit_code = sig->group_exit_code;
- __set_current_state(TASK_STOPPED);
+ if (notify) {
+ read_lock(&tasklist_lock);
+ do_notify_parent_cldstop(current, notify);
+ read_unlock(&tasklist_lock);
+ }
+
+ /* Now we don't run again until woken by SIGCONT or SIGKILL */
+ do {
+ schedule();
+ } while (try_to_freeze());
+
+ tracehook_finish_jctl();
+ current->exit_code = 0;
- spin_unlock_irq(¤t->sighand->siglock);
- finish_stop(stop_count);
return 1;
}
int why = (signal->flags & SIGNAL_STOP_CONTINUED)
? CLD_CONTINUED : CLD_STOPPED;
signal->flags &= ~SIGNAL_CLD_MASK;
- spin_unlock_irq(&sighand->siglock);
- if (unlikely(!tracehook_notify_jctl(1, why)))
- goto relock;
+ why = tracehook_notify_jctl(why, CLD_CONTINUED);
+ spin_unlock_irq(&sighand->siglock);
- read_lock(&tasklist_lock);
- do_notify_parent_cldstop(current->group_leader, why);
- read_unlock(&tasklist_lock);
+ if (why) {
+ read_lock(&tasklist_lock);
+ do_notify_parent_cldstop(current->group_leader, why);
+ read_unlock(&tasklist_lock);
+ }
goto relock;
}
if (unlikely(tsk->signal->group_stop_count) &&
!--tsk->signal->group_stop_count) {
tsk->signal->flags = SIGNAL_STOP_STOPPED;
- group_stop = 1;
+ group_stop = tracehook_notify_jctl(CLD_STOPPED, CLD_STOPPED);
}
out:
spin_unlock_irq(&tsk->sighand->siglock);
- if (unlikely(group_stop) && tracehook_notify_jctl(1, CLD_STOPPED)) {
+ if (unlikely(group_stop)) {
read_lock(&tasklist_lock);
- do_notify_parent_cldstop(tsk, CLD_STOPPED);
+ do_notify_parent_cldstop(tsk, group_stop);
read_unlock(&tasklist_lock);
}
}
do_send_specific(pid_t tgid, pid_t pid, int sig, struct siginfo *info)
{
struct task_struct *p;
- unsigned long flags;
int error = -ESRCH;
rcu_read_lock();
/*
* The null signal is a permissions and process existence
* probe. No signal is actually delivered.
- *
- * If lock_task_sighand() fails we pretend the task dies
- * after receiving the signal. The window is tiny, and the
- * signal is private anyway.
*/
- if (!error && sig && lock_task_sighand(p, &flags)) {
- error = specific_send_sig_info(sig, info, p);
- unlock_task_sighand(p, &flags);
+ if (!error && sig) {
+ error = do_send_sig_info(sig, info, p, false);
+ /*
+ * If lock_task_sighand() failed we pretend the task
+ * dies after receiving the signal. The window is tiny,
+ * and the signal is private anyway.
+ */
+ if (unlikely(error == -ESRCH))
+ error = 0;
}
}
rcu_read_unlock();
static void slow_work_oom_timeout(unsigned long);
#ifdef CONFIG_SYSCTL
-static int slow_work_min_threads_sysctl(struct ctl_table *, int, struct file *,
+static int slow_work_min_threads_sysctl(struct ctl_table *, int,
void __user *, size_t *, loff_t *);
-static int slow_work_max_threads_sysctl(struct ctl_table *, int , struct file *,
+static int slow_work_max_threads_sysctl(struct ctl_table *, int ,
void __user *, size_t *, loff_t *);
#endif
* Handle adjustment of the minimum number of threads
*/
static int slow_work_min_threads_sysctl(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
- int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
int n;
if (ret == 0) {
* Handle adjustment of the maximum number of threads
*/
static int slow_work_max_threads_sysctl(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
- int ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
int n;
if (ret == 0) {
generic_exec_single(cpu, data, wait);
}
-/* Deprecated: shim for archs using old arch_send_call_function_ipi API. */
-
-#ifndef arch_send_call_function_ipi_mask
-# define arch_send_call_function_ipi_mask(maskp) \
- arch_send_call_function_ipi(*(maskp))
-#endif
-
/**
* smp_call_function_many(): Run a function on a set of other CPUs.
* @mask: The set of cpus to run on (only runs on online subset).
EXPORT_SYMBOL(touch_all_softlockup_watchdogs);
int proc_dosoftlockup_thresh(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
touch_all_softlockup_watchdogs();
- return proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
}
/*
err = session;
out:
write_unlock_irq(&tasklist_lock);
+ if (err > 0)
+ proc_sid_connector(group_leader);
return err;
}
current->timer_slack_ns = arg2;
error = 0;
break;
+ case PR_MCE_KILL:
+ if (arg4 | arg5)
+ return -EINVAL;
+ switch (arg2) {
+ case PR_MCE_KILL_CLEAR:
+ if (arg3 != 0)
+ return -EINVAL;
+ current->flags &= ~PF_MCE_PROCESS;
+ break;
+ case PR_MCE_KILL_SET:
+ current->flags |= PF_MCE_PROCESS;
+ if (arg3 == PR_MCE_KILL_EARLY)
+ current->flags |= PF_MCE_EARLY;
+ else if (arg3 == PR_MCE_KILL_LATE)
+ current->flags &= ~PF_MCE_EARLY;
+ else if (arg3 == PR_MCE_KILL_DEFAULT)
+ current->flags &=
+ ~(PF_MCE_EARLY|PF_MCE_PROCESS);
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ error = 0;
+ break;
+ case PR_MCE_KILL_GET:
+ if (arg2 | arg3 | arg4 | arg5)
+ return -EINVAL;
+ if (current->flags & PF_MCE_PROCESS)
+ error = (current->flags & PF_MCE_EARLY) ?
+ PR_MCE_KILL_EARLY : PR_MCE_KILL_LATE;
+ else
+ error = PR_MCE_KILL_DEFAULT;
+ break;
default:
error = -EINVAL;
break;
cond_syscall(compat_sys_sendmsg);
cond_syscall(sys_recvmsg);
cond_syscall(compat_sys_recvmsg);
+cond_syscall(compat_sys_recvfrom);
cond_syscall(sys_socketcall);
cond_syscall(sys_futex);
cond_syscall(compat_sys_futex);
#include <linux/proc_fs.h>
#include <linux/security.h>
#include <linux/ctype.h>
-#include <linux/utsname.h>
#include <linux/kmemcheck.h>
#include <linux/smp_lock.h>
#include <linux/fs.h>
extern int core_uses_pid;
extern int suid_dumpable;
extern char core_pattern[];
+extern unsigned int core_pipe_limit;
extern int pid_max;
extern int min_free_kbytes;
extern int pid_max_min, pid_max_max;
#endif
#ifdef CONFIG_PROC_SYSCTL
-static int proc_do_cad_pid(struct ctl_table *table, int write, struct file *filp,
+static int proc_do_cad_pid(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
-static int proc_taint(struct ctl_table *table, int write, struct file *filp,
+static int proc_taint(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos);
#endif
.proc_handler = &proc_dostring,
.strategy = &sysctl_string,
},
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "core_pipe_limit",
+ .data = &core_pipe_limit,
+ .maxlen = sizeof(unsigned int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
#ifdef CONFIG_PROC_SYSCTL
{
.procname = "tainted",
.mode = 0644,
.proc_handler = &scan_unevictable_handler,
},
+#ifdef CONFIG_MEMORY_FAILURE
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "memory_failure_early_kill",
+ .data = &sysctl_memory_failure_early_kill,
+ .maxlen = sizeof(sysctl_memory_failure_early_kill),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "memory_failure_recovery",
+ .data = &sysctl_memory_failure_recovery,
+ .maxlen = sizeof(sysctl_memory_failure_recovery),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec_minmax,
+ .strategy = &sysctl_intvec,
+ .extra1 = &zero,
+ .extra2 = &one,
+ },
+#endif
+
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
#ifdef CONFIG_PROC_SYSCTL
static int _proc_do_string(void* data, int maxlen, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
size_t len;
* proc_dostring - read a string sysctl
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dostring(struct ctl_table *table, int write, struct file *filp,
+int proc_dostring(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return _proc_do_string(table->data, table->maxlen, write, filp,
+ return _proc_do_string(table->data, table->maxlen, write,
buffer, lenp, ppos);
}
}
static int __do_proc_dointvec(void *tbl_data, struct ctl_table *table,
- int write, struct file *filp, void __user *buffer,
+ int write, void __user *buffer,
size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
#undef TMPBUFLEN
}
-static int do_proc_dointvec(struct ctl_table *table, int write, struct file *filp,
+static int do_proc_dointvec(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos,
int (*conv)(int *negp, unsigned long *lvalp, int *valp,
int write, void *data),
void *data)
{
- return __do_proc_dointvec(table->data, table, write, filp,
+ return __do_proc_dointvec(table->data, table, write,
buffer, lenp, ppos, conv, data);
}
* proc_dointvec - read a vector of integers
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dointvec(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
+ return do_proc_dointvec(table,write,buffer,lenp,ppos,
NULL,NULL);
}
* Taint values can only be increased
* This means we can safely use a temporary.
*/
-static int proc_taint(struct ctl_table *table, int write, struct file *filp,
+static int proc_taint(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table t;
t = *table;
t.data = &tmptaint;
- err = proc_doulongvec_minmax(&t, write, filp, buffer, lenp, ppos);
+ err = proc_doulongvec_minmax(&t, write, buffer, lenp, ppos);
if (err < 0)
return err;
* proc_dointvec_minmax - read a vector of integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dointvec_minmax(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_minmax(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct do_proc_dointvec_minmax_conv_param param = {
.min = (int *) table->extra1,
.max = (int *) table->extra2,
};
- return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
+ return do_proc_dointvec(table, write, buffer, lenp, ppos,
do_proc_dointvec_minmax_conv, ¶m);
}
static int __do_proc_doulongvec_minmax(void *data, struct ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
}
static int do_proc_doulongvec_minmax(struct ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos,
unsigned long convmul,
unsigned long convdiv)
{
return __do_proc_doulongvec_minmax(table->data, table, write,
- filp, buffer, lenp, ppos, convmul, convdiv);
+ buffer, lenp, ppos, convmul, convdiv);
}
/**
* proc_doulongvec_minmax - read a vector of long integers with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_doulongvec_minmax(struct ctl_table *table, int write, struct file *filp,
+int proc_doulongvec_minmax(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos, 1l, 1l);
+ return do_proc_doulongvec_minmax(table, write, buffer, lenp, ppos, 1l, 1l);
}
/**
* proc_doulongvec_ms_jiffies_minmax - read a vector of millisecond values with min/max values
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
* Returns 0 on success.
*/
int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
- return do_proc_doulongvec_minmax(table, write, filp, buffer,
+ return do_proc_doulongvec_minmax(table, write, buffer,
lenp, ppos, HZ, 1000l);
}
* proc_dointvec_jiffies - read a vector of integers as seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dointvec_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
+ return do_proc_dointvec(table,write,buffer,lenp,ppos,
do_proc_dointvec_jiffies_conv,NULL);
}
* proc_dointvec_userhz_jiffies - read a vector of integers as 1/USER_HZ seconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: pointer to the file position
*
* Returns 0 on success.
*/
-int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table,write,filp,buffer,lenp,ppos,
+ return do_proc_dointvec(table,write,buffer,lenp,ppos,
do_proc_dointvec_userhz_jiffies_conv,NULL);
}
* proc_dointvec_ms_jiffies - read a vector of integers as 1 milliseconds
* @table: the sysctl table
* @write: %TRUE if this is a write to the sysctl file
- * @filp: the file structure
* @buffer: the user buffer
* @lenp: the size of the user buffer
* @ppos: file position
*
* Returns 0 on success.
*/
-int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
- return do_proc_dointvec(table, write, filp, buffer, lenp, ppos,
+ return do_proc_dointvec(table, write, buffer, lenp, ppos,
do_proc_dointvec_ms_jiffies_conv, NULL);
}
-static int proc_do_cad_pid(struct ctl_table *table, int write, struct file *filp,
+static int proc_do_cad_pid(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct pid *new_pid;
tmp = pid_vnr(cad_pid);
- r = __do_proc_dointvec(&tmp, table, write, filp, buffer,
+ r = __do_proc_dointvec(&tmp, table, write, buffer,
lenp, ppos, NULL, NULL);
if (r || !write)
return r;
#else /* CONFIG_PROC_FS */
-int proc_dostring(struct ctl_table *table, int write, struct file *filp,
+int proc_dostring(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec_minmax(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_minmax(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_userhz_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_dointvec_ms_jiffies(struct ctl_table *table, int write, struct file *filp,
+int proc_dointvec_ms_jiffies(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
-int proc_doulongvec_minmax(struct ctl_table *table, int write, struct file *filp,
+int proc_doulongvec_minmax(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
return -ENOSYS;
}
int proc_doulongvec_ms_jiffies_minmax(struct ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
if (!table->ctl_name && table->strategy)
set_fail(&fail, table, "Strategy without ctl_name");
#endif
-#ifdef CONFIG_PROC_FS
+#ifdef CONFIG_PROC_SYSCTL
if (table->procname && !table->proc_handler)
set_fail(&fail, table, "No proc_handler");
#endif
-obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o timecompare.o
+obj-y += timekeeping.o ntp.o clocksource.o jiffies.o timer_list.o timecompare.o timeconv.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS_BUILD) += clockevents.o
obj-$(CONFIG_GENERIC_CLOCKEVENTS) += tick-common.o
{
struct clocksource *cs;
- mutex_lock(&clocksource_mutex);
-
list_for_each_entry(cs, &clocksource_list, list)
if (cs->resume)
cs->resume();
clocksource_resume_watchdog();
-
- mutex_unlock(&clocksource_mutex);
}
/**
if (!inidle && !ts->inidle)
goto end;
+ /*
+ * Set ts->inidle unconditionally. Even if the system did not
+ * switch to NOHZ mode the cpu frequency governers rely on the
+ * update of the idle time accounting in tick_nohz_start_idle().
+ */
+ ts->inidle = 1;
+
now = tick_nohz_start_idle(ts);
/*
if (unlikely(ts->nohz_mode == NOHZ_MODE_INACTIVE))
goto end;
- ts->inidle = 1;
-
if (need_resched())
goto end;
--- /dev/null
+/*
+ * Copyright (C) 1993, 1994, 1995, 1996, 1997 Free Software Foundation, Inc.
+ * This file is part of the GNU C Library.
+ * Contributed by Paul Eggert (eggert@twinsun.com).
+ *
+ * The GNU C Library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Library General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * The GNU C Library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Library General Public License for more details.
+ *
+ * You should have received a copy of the GNU Library General Public
+ * License along with the GNU C Library; see the file COPYING.LIB. If not,
+ * write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+ * Boston, MA 02111-1307, USA.
+ */
+
+/*
+ * Converts the calendar time to broken-down time representation
+ * Based on code from glibc-2.6
+ *
+ * 2009-7-14:
+ * Moved from glibc-2.6 to kernel by Zhaolei<zhaolei@cn.fujitsu.com>
+ */
+
+#include <linux/time.h>
+#include <linux/module.h>
+
+/*
+ * Nonzero if YEAR is a leap year (every 4 years,
+ * except every 100th isn't, and every 400th is).
+ */
+static int __isleap(long year)
+{
+ return (year) % 4 == 0 && ((year) % 100 != 0 || (year) % 400 == 0);
+}
+
+/* do a mathdiv for long type */
+static long math_div(long a, long b)
+{
+ return a / b - (a % b < 0);
+}
+
+/* How many leap years between y1 and y2, y1 must less or equal to y2 */
+static long leaps_between(long y1, long y2)
+{
+ long leaps1 = math_div(y1 - 1, 4) - math_div(y1 - 1, 100)
+ + math_div(y1 - 1, 400);
+ long leaps2 = math_div(y2 - 1, 4) - math_div(y2 - 1, 100)
+ + math_div(y2 - 1, 400);
+ return leaps2 - leaps1;
+}
+
+/* How many days come before each month (0-12). */
+static const unsigned short __mon_yday[2][13] = {
+ /* Normal years. */
+ {0, 31, 59, 90, 120, 151, 181, 212, 243, 273, 304, 334, 365},
+ /* Leap years. */
+ {0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366}
+};
+
+#define SECS_PER_HOUR (60 * 60)
+#define SECS_PER_DAY (SECS_PER_HOUR * 24)
+
+/**
+ * time_to_tm - converts the calendar time to local broken-down time
+ *
+ * @totalsecs the number of seconds elapsed since 00:00:00 on January 1, 1970,
+ * Coordinated Universal Time (UTC).
+ * @offset offset seconds adding to totalsecs.
+ * @result pointer to struct tm variable to receive broken-down time
+ */
+void time_to_tm(time_t totalsecs, int offset, struct tm *result)
+{
+ long days, rem, y;
+ const unsigned short *ip;
+
+ days = totalsecs / SECS_PER_DAY;
+ rem = totalsecs % SECS_PER_DAY;
+ rem += offset;
+ while (rem < 0) {
+ rem += SECS_PER_DAY;
+ --days;
+ }
+ while (rem >= SECS_PER_DAY) {
+ rem -= SECS_PER_DAY;
+ ++days;
+ }
+
+ result->tm_hour = rem / SECS_PER_HOUR;
+ rem %= SECS_PER_HOUR;
+ result->tm_min = rem / 60;
+ result->tm_sec = rem % 60;
+
+ /* January 1, 1970 was a Thursday. */
+ result->tm_wday = (4 + days) % 7;
+ if (result->tm_wday < 0)
+ result->tm_wday += 7;
+
+ y = 1970;
+
+ while (days < 0 || days >= (__isleap(y) ? 366 : 365)) {
+ /* Guess a corrected year, assuming 365 days per year. */
+ long yg = y + math_div(days, 365);
+
+ /* Adjust DAYS and Y to match the guessed year. */
+ days -= (yg - y) * 365 + leaps_between(y, yg);
+ y = yg;
+ }
+
+ result->tm_year = y - 1900;
+
+ result->tm_yday = days;
+
+ ip = __mon_yday[__isleap(y)];
+ for (y = 11; days < ip[y]; y--)
+ continue;
+ days -= ip[y];
+
+ result->tm_mon = y;
+ result->tm_mday = days + 1;
+}
+EXPORT_SYMBOL(time_to_tm);
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/mm.h>
+#include <linux/sched.h>
#include <linux/sysdev.h>
#include <linux/clocksource.h>
#include <linux/jiffies.h>
return single_open(filp, timer_list_show, NULL);
}
-static struct file_operations timer_list_fops = {
+static const struct file_operations timer_list_fops = {
.open = timer_list_open,
.read = seq_read,
.llseek = seq_lseek,
return single_open(filp, tstats_show, NULL);
}
-static struct file_operations tstats_fops = {
+static const struct file_operations tstats_fops = {
.open = tstats_open,
.read = seq_read,
.write = tstats_write,
sizeof(r), &r);
}
+/**
+ * blk_add_trace_rq_remap - Add a trace for a request-remap operation
+ * @q: queue the io is for
+ * @rq: the source request
+ * @dev: target device
+ * @from: source sector
+ *
+ * Description:
+ * Device mapper remaps request to other devices.
+ * Add a trace for that action.
+ *
+ **/
+static void blk_add_trace_rq_remap(struct request_queue *q,
+ struct request *rq, dev_t dev,
+ sector_t from)
+{
+ struct blk_trace *bt = q->blk_trace;
+ struct blk_io_trace_remap r;
+
+ if (likely(!bt))
+ return;
+
+ r.device_from = cpu_to_be32(dev);
+ r.device_to = cpu_to_be32(disk_devt(rq->rq_disk));
+ r.sector_from = cpu_to_be64(from);
+
+ __blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq),
+ rq_data_dir(rq), BLK_TA_REMAP, !!rq->errors,
+ sizeof(r), &r);
+}
+
/**
* blk_add_driver_data - Add binary message with driver-specific data
* @q: queue the io is for
WARN_ON(ret);
ret = register_trace_block_remap(blk_add_trace_remap);
WARN_ON(ret);
+ ret = register_trace_block_rq_remap(blk_add_trace_rq_remap);
+ WARN_ON(ret);
}
static void blk_unregister_tracepoints(void)
{
+ unregister_trace_block_rq_remap(blk_add_trace_rq_remap);
unregister_trace_block_remap(blk_add_trace_remap);
unregister_trace_block_split(blk_add_trace_split);
unregister_trace_block_unplug_io(blk_add_trace_unplug_io);
return sysfs_create_group(&dev->kobj, &blk_trace_attr_group);
}
+void blk_trace_remove_sysfs(struct device *dev)
+{
+ sysfs_remove_group(&dev->kobj, &blk_trace_attr_group);
+}
+
#endif /* CONFIG_BLK_DEV_IO_TRACE */
#ifdef CONFIG_EVENT_TRACING
if (ftrace_trace_function == ftrace_stub)
return;
+#ifdef CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST
func = ftrace_trace_function;
+#else
+ func = __ftrace_trace_function;
+#endif
if (ftrace_pid_trace) {
set_ftrace_pid_function(func);
out:
mutex_unlock(&ftrace_profile_lock);
- filp->f_pos += cnt;
+ *ppos += cnt;
return cnt;
}
failed = __ftrace_replace_code(rec, enable);
if (failed) {
rec->flags |= FTRACE_FL_FAILED;
- if ((system_state == SYSTEM_BOOTING) ||
- !core_kernel_text(rec->ip)) {
- ftrace_free_rec(rec);
- } else {
- ftrace_bug(failed, rec->ip);
- /* Stop processing */
- return;
- }
+ ftrace_bug(failed, rec->ip);
+ /* Stop processing */
+ return;
}
} while_for_each_ftrace_rec();
}
if (!ret) {
struct seq_file *m = file->private_data;
m->private = iter;
- } else
+ } else {
+ trace_parser_put(&iter->parser);
kfree(iter);
+ }
} else
file->private_data = iter;
mutex_unlock(&ftrace_regex_lock);
struct trace_parser *parser;
ssize_t ret, read;
- if (!cnt || cnt < 0)
+ if (!cnt)
return 0;
mutex_lock(&ftrace_regex_lock);
parser = &iter->parser;
read = trace_get_user(parser, ubuf, cnt, ppos);
- if (trace_parser_loaded(parser) &&
+ if (read >= 0 && trace_parser_loaded(parser) &&
!trace_parser_cont(parser)) {
ret = ftrace_process_regex(parser->buffer,
parser->idx, enable);
if (ret)
- goto out;
+ goto out_unlock;
trace_parser_clear(parser);
}
ret = read;
-
+out_unlock:
mutex_unlock(&ftrace_regex_lock);
-out:
+
return ret;
}
size_t cnt, loff_t *ppos)
{
struct trace_parser parser;
- size_t read = 0;
- ssize_t ret;
+ ssize_t read, ret;
if (!cnt || cnt < 0)
return 0;
if (ftrace_graph_count >= FTRACE_GRAPH_MAX_FUNCS) {
ret = -EBUSY;
- goto out;
+ goto out_unlock;
}
if (trace_parser_get_init(&parser, FTRACE_BUFF_MAX)) {
ret = -ENOMEM;
- goto out;
+ goto out_unlock;
}
read = trace_get_user(&parser, ubuf, cnt, ppos);
- if (trace_parser_loaded((&parser))) {
+ if (read >= 0 && trace_parser_loaded((&parser))) {
parser.buffer[parser.idx] = 0;
/* we allow only one expression at a time */
ret = ftrace_set_func(ftrace_graph_funcs, &ftrace_graph_count,
parser.buffer);
if (ret)
- goto out;
+ goto out_free;
}
ret = read;
- out:
+
+out_free:
trace_parser_put(&parser);
+out_unlock:
mutex_unlock(&graph_lock);
return ret;
}
#ifdef CONFIG_MODULES
-void ftrace_release(void *start, void *end)
+void ftrace_release_mod(struct module *mod)
{
struct dyn_ftrace *rec;
struct ftrace_page *pg;
- unsigned long s = (unsigned long)start;
- unsigned long e = (unsigned long)end;
- if (ftrace_disabled || !start || start == end)
+ if (ftrace_disabled)
return;
mutex_lock(&ftrace_lock);
do_for_each_ftrace_rec(pg, rec) {
- if ((rec->ip >= s) && (rec->ip < e)) {
+ if (within_module_core(rec->ip, mod)) {
/*
* rec->ip is changed in ftrace_free_rec()
* It should not between s and e if record was freed.
mod->num_ftrace_callsites);
break;
case MODULE_STATE_GOING:
- ftrace_release(mod->ftrace_callsites,
- mod->ftrace_callsites +
- mod->num_ftrace_callsites);
+ ftrace_release_mod(mod);
break;
}
int
ftrace_enable_sysctl(struct ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
mutex_lock(&ftrace_lock);
- ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (ret || !write || (last_ftrace_enabled == !!ftrace_enabled))
goto out;
return 1;
}
- if (!register_tracer(&kmem_tracer)) {
+ if (register_tracer(&kmem_tracer) != 0) {
pr_warning("Warning: could not register the kmem tracer\n");
return 1;
}
/* Up this if you want to test the TIME_EXTENTS and normalization */
#define DEBUG_SHIFT 0
-static inline u64 rb_time_stamp(struct ring_buffer *buffer, int cpu)
+static inline u64 rb_time_stamp(struct ring_buffer *buffer)
{
/* shift to debug/test normalization and TIME_EXTENTS */
return buffer->clock() << DEBUG_SHIFT;
u64 time;
preempt_disable_notrace();
- time = rb_time_stamp(buffer, cpu);
+ time = rb_time_stamp(buffer);
preempt_enable_no_resched_notrace();
return time;
}
/*
- * rb_is_head_page - test if the give page is the head page
+ * rb_is_head_page - test if the given page is the head page
*
* Because the reader may move the head_page pointer, we can
* not trust what the head page is (it may be pointing to
atomic_inc(&cpu_buffer->record_disabled);
synchronize_sched();
+ spin_lock_irq(&cpu_buffer->reader_lock);
rb_head_page_deactivate(cpu_buffer);
for (i = 0; i < nr_pages; i++) {
return;
rb_reset_cpu(cpu_buffer);
+ spin_unlock_irq(&cpu_buffer->reader_lock);
rb_check_pages(cpu_buffer);
* Nested commits always have zero deltas, so
* just reread the time stamp
*/
- *ts = rb_time_stamp(buffer, cpu_buffer->cpu);
+ *ts = rb_time_stamp(buffer);
next_page->page->time_stamp = *ts;
}
if (RB_WARN_ON(cpu_buffer, ++nr_loops > 1000))
goto out_fail;
- ts = rb_time_stamp(cpu_buffer->buffer, cpu_buffer->cpu);
+ ts = rb_time_stamp(cpu_buffer->buffer);
/*
* Only the first commit can update the timestamp.
EXPORT_SYMBOL_GPL(ring_buffer_entries);
/**
- * ring_buffer_overrun_cpu - get the number of overruns in buffer
+ * ring_buffer_overruns - get the number of overruns in buffer
* @buffer: The ring buffer
*
* Returns the total number of overruns in the ring buffer
/* read the non-space input */
while (cnt && !isspace(ch)) {
- if (parser->idx < parser->size)
+ if (parser->idx < parser->size - 1)
parser->buffer[parser->idx++] = ch;
else {
ret = -EINVAL;
int trace_vprintk(unsigned long ip, const char *fmt, va_list args)
{
- return trace_array_printk(&global_trace, ip, fmt, args);
+ return trace_array_vprintk(&global_trace, ip, fmt, args);
}
EXPORT_SYMBOL_GPL(trace_vprintk);
if (current_trace)
*iter->trace = *current_trace;
- if (!alloc_cpumask_var(&iter->started, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&iter->started, GFP_KERNEL))
goto fail;
- cpumask_clear(iter->started);
-
if (current_trace && current_trace->print_max)
iter->tr = &max_tr;
else
return ret;
}
- filp->f_pos += cnt;
+ *ppos += cnt;
return cnt;
}
}
mutex_unlock(&trace_types_lock);
- filp->f_pos += cnt;
+ *ppos += cnt;
return cnt;
}
if (err)
return err;
- filp->f_pos += ret;
+ *ppos += ret;
return ret;
}
}
}
- filp->f_pos += cnt;
+ *ppos += cnt;
/* If check pages failed, return ENOMEM */
if (tracing_disabled)
if (!alloc_cpumask_var(&tracing_cpumask, GFP_KERNEL))
goto out_free_buffer_mask;
- if (!alloc_cpumask_var(&tracing_reader_cpumask, GFP_KERNEL))
+ if (!zalloc_cpumask_var(&tracing_reader_cpumask, GFP_KERNEL))
goto out_free_tracing_cpumask;
/* To save memory, keep the ring buffer size to its minimum */
cpumask_copy(tracing_buffer_mask, cpu_possible_mask);
cpumask_copy(tracing_cpumask, cpu_all_mask);
- cpumask_clear(tracing_reader_cpumask);
/* TODO: make the number of buffers hot pluggable with CPUS */
global_trace.buffer = ring_buffer_alloc(ring_buf_size,
struct trace_array *tr = branch_tracer;
struct ring_buffer_event *event;
struct trace_branch *entry;
+ struct ring_buffer *buffer;
unsigned long flags;
int cpu, pc;
const char *p;
goto out;
pc = preempt_count();
- event = trace_buffer_lock_reserve(tr, TRACE_BRANCH,
+ buffer = tr->buffer;
+ event = trace_buffer_lock_reserve(buffer, TRACE_BRANCH,
sizeof(*entry), flags, pc);
if (!event)
goto out;
entry->line = f->line;
entry->correct = val == expect;
- if (!filter_check_discard(call, entry, tr->buffer, event))
- ring_buffer_unlock_commit(tr->buffer, event);
+ if (!filter_check_discard(call, entry, buffer, event))
+ ring_buffer_unlock_commit(buffer, event);
out:
atomic_dec(&tr->data[cpu]->disabled);
if (atomic_inc_return(&event->profile_count))
return 0;
- if (!total_profile_count++) {
+ if (!total_profile_count) {
buf = (char *)alloc_percpu(profile_buf_t);
if (!buf)
goto fail_buf;
}
ret = event->profile_enable();
- if (!ret)
+ if (!ret) {
+ total_profile_count++;
return 0;
+ }
- kfree(trace_profile_buf_nmi);
fail_buf_nmi:
- kfree(trace_profile_buf);
+ if (!total_profile_count) {
+ free_percpu(trace_profile_buf_nmi);
+ free_percpu(trace_profile_buf);
+ trace_profile_buf_nmi = NULL;
+ trace_profile_buf = NULL;
+ }
fail_buf:
- total_profile_count--;
atomic_dec(&event->profile_count);
return ret;
size_t cnt, loff_t *ppos)
{
struct trace_parser parser;
- size_t read = 0;
- ssize_t ret;
+ ssize_t read, ret;
- if (!cnt || cnt < 0)
+ if (!cnt)
return 0;
ret = tracing_update_buffers();
read = trace_get_user(&parser, ubuf, cnt, ppos);
- if (trace_parser_loaded((&parser))) {
+ if (read >= 0 && trace_parser_loaded((&parser))) {
int set = 1;
if (*parser.buffer == '!')
while (!list_empty(&ps->postfix)) {
elt = list_first_entry(&ps->postfix, struct postfix_elt, list);
- kfree(elt->operand);
list_del(&elt->list);
+ kfree(elt->operand);
+ kfree(elt);
}
}
struct ftrace_event_call *call = &event_hw_branch;
struct trace_array *tr = hw_branch_trace;
struct ring_buffer_event *event;
+ struct ring_buffer *buf;
struct hw_branch_entry *entry;
unsigned long irq1;
int cpu;
if (atomic_inc_return(&tr->data[cpu]->disabled) != 1)
goto out;
- event = trace_buffer_lock_reserve(tr, TRACE_HW_BRANCHES,
+ buf = tr->buffer;
+ event = trace_buffer_lock_reserve(buf, TRACE_HW_BRANCHES,
sizeof(*entry), 0, 0);
if (!event)
goto out;
entry->ent.type = TRACE_HW_BRANCHES;
entry->from = from;
entry->to = to;
- if (!filter_check_discard(call, entry, tr->buffer, event))
- trace_buffer_unlock_commit(tr, event, 0, 0);
+ if (!filter_check_discard(call, entry, buf, event))
+ trace_buffer_unlock_commit(buf, event, 0, 0);
out:
atomic_dec(&tr->data[cpu]->disabled);
* @s: trace sequence descriptor
* @fmt: printf format string
*
+ * It returns 0 if the trace oversizes the buffer's free
+ * space, 1 otherwise.
+ *
* The tracer may use either sequence operations or its own
* copy to user routines. To simplify formating of a trace
* trace_seq_printf is used to store strings into a special
s->len += ret;
- return len;
+ return 1;
}
EXPORT_SYMBOL_GPL(trace_seq_printf);
hardirq ? 'h' : softirq ? 's' : '.'))
return 0;
- if (entry->lock_depth < 0)
- ret = trace_seq_putc(s, '.');
+ if (entry->preempt_count)
+ ret = trace_seq_printf(s, "%x", entry->preempt_count);
else
- ret = trace_seq_printf(s, "%d", entry->lock_depth);
+ ret = trace_seq_putc(s, '.');
+
if (!ret)
return 0;
- if (entry->preempt_count)
- return trace_seq_printf(s, "%x", entry->preempt_count);
- return trace_seq_putc(s, '.');
+ if (entry->lock_depth < 0)
+ return trace_seq_putc(s, '.');
+
+ return trace_seq_printf(s, "%d", entry->lock_depth);
}
static int
trace_assign_type(field, iter->ent);
if (!S)
- task_state_char(field->prev_state);
+ S = task_state_char(field->prev_state);
T = task_state_char(field->next_state);
if (!trace_seq_printf(&iter->seq, "%d %d %c %d %d %d %c\n",
field->prev_pid,
trace_assign_type(field, iter->ent);
if (!S)
- task_state_char(field->prev_state);
+ S = task_state_char(field->prev_state);
T = task_state_char(field->next_state);
SEQ_PUT_HEX_FIELD_RET(s, field->prev_pid);
int
stack_trace_sysctl(struct ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
mutex_lock(&stack_sysctl_mutex);
- ret = proc_dointvec(table, write, file, buffer, lenp, ppos);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (ret || !write ||
(last_stack_tracer_enabled == !!stack_tracer_enabled))
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n"
"\tfield:%s %s;\toffset:%zu;\tsize:%zu;\n",
SYSCALL_FIELD(int, nr),
- SYSCALL_FIELD(unsigned long, ret));
+ SYSCALL_FIELD(long, ret));
if (!ret)
return 0;
if (ret)
return ret;
- ret = trace_define_field(call, SYSCALL_FIELD(unsigned long, ret), 0,
+ ret = trace_define_field(call, SYSCALL_FIELD(long, ret), 0,
FILTER_OTHER);
return ret;
*/
#include <linux/mm.h>
-#include <linux/utsname.h>
#include <linux/mman.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
* Special case of dostring for the UTS structure. This has locks
* to observe. Should this be in kernel/sys.c ????
*/
-static int proc_do_uts_string(ctl_table *table, int write, struct file *filp,
+static int proc_do_uts_string(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct ctl_table uts_table;
int r;
memcpy(&uts_table, table, sizeof(uts_table));
uts_table.data = get_uts(table, write);
- r = proc_dostring(&uts_table,write,filp,buffer,lenp, ppos);
+ r = proc_dostring(&uts_table,write,buffer,lenp, ppos);
put_uts(table, write, uts_table.data);
return r;
}
}
EXPORT_SYMBOL(schedule_delayed_work);
+/**
+ * flush_delayed_work - block until a dwork_struct's callback has terminated
+ * @dwork: the delayed work which is to be flushed
+ *
+ * Any timeout is cancelled, and any pending work is run immediately.
+ */
+void flush_delayed_work(struct delayed_work *dwork)
+{
+ if (del_timer_sync(&dwork->timer)) {
+ struct cpu_workqueue_struct *cwq;
+ cwq = wq_per_cpu(keventd_wq, get_cpu());
+ __queue_work(cwq, &dwork->work);
+ put_cpu();
+ }
+ flush_work(&dwork->work);
+}
+EXPORT_SYMBOL(flush_delayed_work);
+
/**
* schedule_delayed_work_on - queue work in global workqueue on CPU after delay
* @cpu: cpu to use
int schedule_on_each_cpu(work_func_t func)
{
int cpu;
+ int orig = -1;
struct work_struct *works;
works = alloc_percpu(struct work_struct);
if (!works)
return -ENOMEM;
+ /*
+ * when running in keventd don't schedule a work item on itself.
+ * Can just call directly because the work queue is already bound.
+ * This also is faster.
+ * Make this a generic parameter for other workqueues?
+ */
+ if (current_is_keventd()) {
+ orig = raw_smp_processor_id();
+ INIT_WORK(per_cpu_ptr(works, orig), func);
+ func(per_cpu_ptr(works, orig));
+ }
+
get_online_cpus();
for_each_online_cpu(cpu) {
struct work_struct *work = per_cpu_ptr(works, cpu);
+ if (cpu == orig)
+ continue;
INIT_WORK(work, func);
schedule_work_on(cpu, work);
}
- for_each_online_cpu(cpu)
- flush_work(per_cpu_ptr(works, cpu));
+ for_each_online_cpu(cpu) {
+ if (cpu != orig)
+ flush_work(per_cpu_ptr(works, cpu));
+ }
put_online_cpus();
free_percpu(works);
return 0;
keys are documented in <file:Documentation/sysrq.txt>. Don't say Y
unless you really know what this hack does.
+config STRIP_ASM_SYMS
+ bool "Strip assembler-generated symbols during link"
+ default n
+ help
+ Strip internal assembler-generated symbols during a link (symbols
+ that look like '.Lxxx') so they don't pollute the output of
+ get_wchan() and suchlike.
+
config UNUSED_SYMBOLS
bool "Enable unused/obsolete exported symbols"
default y if X86
config DEBUG_KMEMLEAK
bool "Kernel memory leak detector"
- depends on DEBUG_KERNEL && EXPERIMENTAL && (X86 || ARM || PPC) && \
- !MEMORY_HOTPLUG
+ depends on DEBUG_KERNEL && EXPERIMENTAL && !MEMORY_HOTPLUG && \
+ (X86 || ARM || PPC || S390)
+
select DEBUG_FS if SYSFS
select STACKTRACE if STACKTRACE_SUPPORT
select KALLSYMS
config DEBUG_KMEMLEAK_EARLY_LOG_SIZE
int "Maximum kmemleak early log entries"
depends on DEBUG_KMEMLEAK
- range 200 2000
+ range 200 40000
default 400
help
Kmemleak must track all the memory allocations to avoid
config DEBUG_PREEMPT
bool "Debug preemptible kernel"
- depends on DEBUG_KERNEL && PREEMPT && (TRACE_IRQFLAGS_SUPPORT || PPC64)
+ depends on DEBUG_KERNEL && PREEMPT && TRACE_IRQFLAGS_SUPPORT
default y
help
If you say Y here then the kernel will use a debug variant of the
*/
#include <linux/debugobjects.h>
#include <linux/interrupt.h>
+#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/hash.h>
#define GZIP_IOBUF_SIZE (16*1024)
+static int nofill(void *buffer, unsigned int len)
+{
+ return -1;
+}
+
/* Included from initramfs et al code */
STATIC int INIT gunzip(unsigned char *buf, int len,
int(*fill)(void*, unsigned int),
goto gunzip_nomem4;
}
+ if (!fill)
+ fill = nofill;
+
if (len == 0)
len = fill(zbuf, GZIP_IOBUF_SIZE);
#define RC_MODEL_TOTAL_BITS 11
+static int nofill(void *buffer, unsigned int len)
+{
+ return -1;
+}
+
/* Called twice: once at startup and once in rc_normalize() */
static void INIT rc_read(struct rc *rc)
{
int (*fill)(void*, unsigned int),
char *buffer, int buffer_size)
{
- rc->fill = fill;
+ if (fill)
+ rc->fill = fill;
+ else
+ rc->fill = nofill;
rc->buffer = (uint8_t *)buffer;
rc->buffer_size = buffer_size;
rc->buffer_end = rc->buffer + rc->buffer_size;
err_printk(ref->dev, entry, "DMA-API: device driver frees "
"DMA memory with different CPU address "
"[device address=0x%016llx] [size=%llu bytes] "
- "[cpu alloc address=%p] [cpu free address=%p]",
+ "[cpu alloc address=0x%016llx] "
+ "[cpu free address=0x%016llx]",
ref->dev_addr, ref->size,
- (void *)entry->paddr, (void *)ref->paddr);
+ (unsigned long long)entry->paddr,
+ (unsigned long long)ref->paddr);
}
if (ref->sg_call_ents && ref->type == dma_debug_sg &&
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/random.h>
+#include <linux/sched.h>
#include <linux/stat.h>
#include <linux/types.h>
#include <linux/fs.h>
return p;
}
-static char *ip6_compressed_string(char *p, const struct in6_addr *addr)
+static char *ip6_compressed_string(char *p, const char *addr)
{
int i;
int j;
u8 hi;
u8 lo;
bool needcolon = false;
- bool useIPv4 = ipv6_addr_v4mapped(addr) || ipv6_addr_is_isatap(addr);
+ bool useIPv4;
+ struct in6_addr in6;
+
+ memcpy(&in6, addr, sizeof(struct in6_addr));
+
+ useIPv4 = ipv6_addr_v4mapped(&in6) || ipv6_addr_is_isatap(&in6);
memset(zerolength, 0, sizeof(zerolength));
/* find position of longest 0 run */
for (i = 0; i < range; i++) {
for (j = i; j < range; j++) {
- if (addr->s6_addr16[j] != 0)
+ if (in6.s6_addr16[j] != 0)
break;
zerolength[i]++;
}
needcolon = false;
}
/* hex u16 without leading 0s */
- word = ntohs(addr->s6_addr16[i]);
+ word = ntohs(in6.s6_addr16[i]);
hi = word >> 8;
lo = word & 0xff;
if (hi) {
if (useIPv4) {
if (needcolon)
*p++ = ':';
- p = ip4_string(p, &addr->s6_addr[12], false);
+ p = ip4_string(p, &in6.s6_addr[12], false);
}
*p = '\0';
return p;
}
-static char *ip6_string(char *p, const struct in6_addr *addr, const char *fmt)
+static char *ip6_string(char *p, const char *addr, const char *fmt)
{
int i;
for (i = 0; i < 8; i++) {
- p = pack_hex_byte(p, addr->s6_addr[2 * i]);
- p = pack_hex_byte(p, addr->s6_addr[2 * i + 1]);
+ p = pack_hex_byte(p, *addr++);
+ p = pack_hex_byte(p, *addr++);
if (fmt[0] == 'I' && i != 7)
*p++ = ':';
}
char ip6_addr[sizeof("xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:255.255.255.255")];
if (fmt[0] == 'I' && fmt[2] == 'c')
- ip6_compressed_string(ip6_addr, (const struct in6_addr *)addr);
+ ip6_compressed_string(ip6_addr, addr);
else
- ip6_string(ip6_addr, (const struct in6_addr *)addr, fmt);
+ ip6_string(ip6_addr, addr, fmt);
return string(buf, end, ip6_addr, spec);
}
* advance both strings to next white space
*/
if (*fmt == '*') {
- while (!isspace(*fmt) && *fmt)
+ while (!isspace(*fmt) && *fmt != '%' && *fmt)
fmt++;
while (!isspace(*str) && *str)
str++;
config SPARSEMEM
def_bool y
- depends on SPARSEMEM_MANUAL
+ depends on (!SELECT_MEMORY_MODEL && ARCH_SPARSEMEM_ENABLE) || SPARSEMEM_MANUAL
config FLATMEM
def_bool y
bool "Allow for memory hot-add"
depends on SPARSEMEM || X86_64_ACPI_NUMA
depends on HOTPLUG && !(HIBERNATION && !S390) && ARCH_ENABLE_MEMORY_HOTPLUG
- depends on (IA64 || X86 || PPC64 || SUPERH || S390)
+ depends on (IA64 || X86 || PPC_BOOK3S_64 || SUPERH || S390)
comment "Memory hotplug is currently incompatible with Software Suspend"
depends on SPARSEMEM && HOTPLUG && HIBERNATION && !S390
the many instances by a single resident page with that content, so
saving memory until one or another app needs to modify the content.
Recommended for use with KVM, or with other duplicative applications.
- See Documentation/vm/ksm.txt for more information.
+ See Documentation/vm/ksm.txt for more information: KSM is inactive
+ until a program has madvised that an area is MADV_MERGEABLE, and
+ root has set /sys/kernel/mm/ksm/run to 1 (if CONFIG_SYSFS is set).
config DEFAULT_MMAP_MIN_ADDR
int "Low address space to protect from user allocation"
This value can be changed after boot using the
/proc/sys/vm/mmap_min_addr tunable.
+config ARCH_SUPPORTS_MEMORY_FAILURE
+ bool
+
+config MEMORY_FAILURE
+ depends on MMU
+ depends on ARCH_SUPPORTS_MEMORY_FAILURE
+ bool "Enable recovery from hardware memory errors"
+ help
+ Enables code to recover from some memory failures on systems
+ with MCA recovery. This allows a system to continue running
+ even when some of its memory has uncorrected errors. This requires
+ special hardware support and typically ECC memory.
+
+config HWPOISON_INJECT
+ tristate "Poison pages injector"
+ depends on MEMORY_FAILURE && DEBUG_KERNEL
config NOMMU_INITIAL_TRIM_EXCESS
int "Turn on mmap() excess space trimming before booting"
mmu-y := nommu.o
mmu-$(CONFIG_MMU) := fremap.o highmem.o madvise.o memory.o mincore.o \
mlock.o mmap.o mprotect.o mremap.o msync.o rmap.o \
- vmalloc.o
+ vmalloc.o pagewalk.o
obj-y := bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
maccess.o page_alloc.o page-writeback.o \
readahead.o swap.o truncate.o vmscan.o shmem.o \
prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
page_isolation.o mm_init.o mmu_context.o \
- pagewalk.o $(mmu-y)
+ $(mmu-y)
obj-y += init-mm.o
obj-$(CONFIG_BOUNCE) += bounce.o
endif
obj-$(CONFIG_QUICKLIST) += quicklist.o
obj-$(CONFIG_CGROUP_MEM_RES_CTLR) += memcontrol.o page_cgroup.o
+obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o
+obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o
obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
obj-$(CONFIG_DEBUG_KMEMLEAK_TEST) += kmemleak-test.o
"BdiDirtyThresh: %8lu kB\n"
"DirtyThresh: %8lu kB\n"
"BackgroundThresh: %8lu kB\n"
- "WriteBack threads:%8lu\n"
+ "WritebackThreads: %8lu\n"
"b_dirty: %8lu\n"
"b_io: %8lu\n"
"b_more_io: %8lu\n"
kthread_stop(wb->task);
}
+/*
+ * This bdi is going away now, make sure that no super_blocks point to it
+ */
+static void bdi_prune_sb(struct backing_dev_info *bdi)
+{
+ struct super_block *sb;
+
+ spin_lock(&sb_lock);
+ list_for_each_entry(sb, &super_blocks, s_list) {
+ if (sb->s_bdi == bdi)
+ sb->s_bdi = NULL;
+ }
+ spin_unlock(&sb_lock);
+}
+
void bdi_unregister(struct backing_dev_info *bdi)
{
if (bdi->dev) {
+ bdi_prune_sb(bdi);
+
if (!bdi_cap_flush_forker(bdi))
bdi_wb_shutdown(bdi);
bdi_debug_unregister(bdi);
/*
* Lock ordering:
*
- * ->i_mmap_lock (vmtruncate)
+ * ->i_mmap_lock (truncate_pagecache)
* ->private_lock (__free_pte->__set_page_dirty_buffers)
* ->swap_lock (exclusive_swap_page, others)
* ->mapping->tree_lock
*
* ->task->proc_lock
* ->dcache_lock (proc_pid_lookup)
+ *
+ * (code doesn't rely on that order, so you could switch it around)
+ * ->tasklist_lock (memory_failure, collect_procs_ao)
+ * ->i_mmap_lock
*/
/*
}
EXPORT_SYMBOL(filemap_fault);
-struct vm_operations_struct generic_file_vm_ops = {
+const struct vm_operations_struct generic_file_vm_ops = {
.fault = filemap_fault,
};
}
}
-static struct vm_operations_struct xip_file_vm_ops = {
+static const struct vm_operations_struct xip_file_vm_ops = {
.fault = xip_file_fault,
};
#ifdef CONFIG_SYSCTL
int hugetlb_sysctl_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer,
+ void __user *buffer,
size_t *length, loff_t *ppos)
{
struct hstate *h = &default_hstate;
table->data = &tmp;
table->maxlen = sizeof(unsigned long);
- proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
+ proc_doulongvec_minmax(table, write, buffer, length, ppos);
if (write)
h->max_huge_pages = set_max_huge_pages(h, tmp);
}
int hugetlb_treat_movable_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer,
+ void __user *buffer,
size_t *length, loff_t *ppos)
{
- proc_dointvec(table, write, file, buffer, length, ppos);
+ proc_dointvec(table, write, buffer, length, ppos);
if (hugepages_treat_as_movable)
htlb_alloc_mask = GFP_HIGHUSER_MOVABLE;
else
}
int hugetlb_overcommit_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer,
+ void __user *buffer,
size_t *length, loff_t *ppos)
{
struct hstate *h = &default_hstate;
table->data = &tmp;
table->maxlen = sizeof(unsigned long);
- proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
+ proc_doulongvec_minmax(table, write, buffer, length, ppos);
if (write) {
spin_lock(&hugetlb_lock);
return 0;
}
-struct vm_operations_struct hugetlb_vm_ops = {
+const struct vm_operations_struct hugetlb_vm_ops = {
.fault = hugetlb_vm_op_fault,
.open = hugetlb_vm_op_open,
.close = hugetlb_vm_op_close,
--- /dev/null
+/* Inject a hwpoison memory failure on a arbitary pfn */
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+
+static struct dentry *hwpoison_dir, *corrupt_pfn;
+
+static int hwpoison_inject(void *data, u64 val)
+{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ printk(KERN_INFO "Injecting memory failure at pfn %Lx\n", val);
+ return __memory_failure(val, 18, 0);
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(hwpoison_fops, NULL, hwpoison_inject, "%lli\n");
+
+static void pfn_inject_exit(void)
+{
+ if (hwpoison_dir)
+ debugfs_remove_recursive(hwpoison_dir);
+}
+
+static int pfn_inject_init(void)
+{
+ hwpoison_dir = debugfs_create_dir("hwpoison", NULL);
+ if (hwpoison_dir == NULL)
+ return -ENOMEM;
+ corrupt_pfn = debugfs_create_file("corrupt-pfn", 0600, hwpoison_dir,
+ NULL, &hwpoison_fops);
+ if (corrupt_pfn == NULL) {
+ pfn_inject_exit();
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+module_init(pfn_inject_init);
+module_exit(pfn_inject_exit);
+MODULE_LICENSE("GPL");
*/
rcu_read_lock();
object = create_object((unsigned long)log->ptr, log->size,
- log->min_count, GFP_KERNEL);
+ log->min_count, GFP_ATOMIC);
+ if (!object)
+ goto out;
spin_lock_irqsave(&object->lock, flags);
for (i = 0; i < log->trace_len; i++)
object->trace[i] = log->trace[i];
object->trace_len = log->trace_len;
spin_unlock_irqrestore(&object->lock, flags);
+out:
rcu_read_unlock();
}
#include <linux/slab.h>
#include <linux/rbtree.h>
#include <linux/mmu_notifier.h>
+#include <linux/swap.h>
#include <linux/ksm.h>
#include <asm/tlbflush.h>
static unsigned long ksm_rmap_items;
/* Limit on the number of unswappable pages used */
-static unsigned long ksm_max_kernel_pages = 2000;
+static unsigned long ksm_max_kernel_pages;
/* Number of pages ksmd should scan in one batch */
-static unsigned int ksm_thread_pages_to_scan = 200;
+static unsigned int ksm_thread_pages_to_scan = 100;
/* Milliseconds ksmd should sleep between batches */
static unsigned int ksm_thread_sleep_millisecs = 20;
#define KSM_RUN_STOP 0
#define KSM_RUN_MERGE 1
#define KSM_RUN_UNMERGE 2
-static unsigned int ksm_run = KSM_RUN_MERGE;
+static unsigned int ksm_run = KSM_RUN_STOP;
static DECLARE_WAIT_QUEUE_HEAD(ksm_thread_wait);
static DEFINE_MUTEX(ksm_thread_mutex);
struct task_struct *ksm_thread;
int err;
+ ksm_max_kernel_pages = totalram_pages / 4;
+
err = ksm_slab_init();
if (err)
goto out;
kthread_stop(ksm_thread);
goto out_free2;
}
+#else
+ ksm_run = KSM_RUN_MERGE; /* no way for user to start it */
+
#endif /* CONFIG_SYSFS */
return 0;
return error;
}
+#ifdef CONFIG_MEMORY_FAILURE
+/*
+ * Error injection support for memory error handling.
+ */
+static int madvise_hwpoison(unsigned long start, unsigned long end)
+{
+ int ret = 0;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ for (; start < end; start += PAGE_SIZE) {
+ struct page *p;
+ int ret = get_user_pages(current, current->mm, start, 1,
+ 0, 0, &p, NULL);
+ if (ret != 1)
+ return ret;
+ printk(KERN_INFO "Injecting memory failure for page %lx at %lx\n",
+ page_to_pfn(p), start);
+ /* Ignore return value for now */
+ __memory_failure(page_to_pfn(p), 0, 1);
+ put_page(p);
+ }
+ return ret;
+}
+#endif
+
static long
madvise_vma(struct vm_area_struct *vma, struct vm_area_struct **prev,
unsigned long start, unsigned long end, int behavior)
int write;
size_t len;
+#ifdef CONFIG_MEMORY_FAILURE
+ if (behavior == MADV_HWPOISON)
+ return madvise_hwpoison(start, start+len_in);
+#endif
if (!madvise_behavior_valid(behavior))
return error;
#include <linux/rcupdate.h>
#include <linux/limits.h>
#include <linux/mutex.h>
+#include <linux/rbtree.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/spinlock.h>
struct cgroup_subsys mem_cgroup_subsys __read_mostly;
#define MEM_CGROUP_RECLAIM_RETRIES 5
+struct mem_cgroup *root_mem_cgroup __read_mostly;
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/* Turned on only when memory cgroup is enabled && really_do_swap_account = 1 */
#endif
static DEFINE_MUTEX(memcg_tasklist); /* can be hold under cgroup_mutex */
+#define SOFTLIMIT_EVENTS_THRESH (1000)
/*
* Statistics for memory cgroup.
MEM_CGROUP_STAT_MAPPED_FILE, /* # of pages charged as file rss */
MEM_CGROUP_STAT_PGPGIN_COUNT, /* # of pages paged in */
MEM_CGROUP_STAT_PGPGOUT_COUNT, /* # of pages paged out */
+ MEM_CGROUP_STAT_EVENTS, /* sum of pagein + pageout for internal use */
+ MEM_CGROUP_STAT_SWAPOUT, /* # of pages, swapped out */
MEM_CGROUP_STAT_NSTATS,
};
struct mem_cgroup_stat_cpu cpustat[0];
};
+static inline void
+__mem_cgroup_stat_reset_safe(struct mem_cgroup_stat_cpu *stat,
+ enum mem_cgroup_stat_index idx)
+{
+ stat->count[idx] = 0;
+}
+
+static inline s64
+__mem_cgroup_stat_read_local(struct mem_cgroup_stat_cpu *stat,
+ enum mem_cgroup_stat_index idx)
+{
+ return stat->count[idx];
+}
+
/*
* For accounting under irq disable, no need for increment preempt count.
*/
unsigned long count[NR_LRU_LISTS];
struct zone_reclaim_stat reclaim_stat;
+ struct rb_node tree_node; /* RB tree node */
+ unsigned long long usage_in_excess;/* Set to the value by which */
+ /* the soft limit is exceeded*/
+ bool on_tree;
+ struct mem_cgroup *mem; /* Back pointer, we cannot */
+ /* use container_of */
};
/* Macro for accessing counter */
#define MEM_CGROUP_ZSTAT(mz, idx) ((mz)->count[(idx)])
struct mem_cgroup_per_node *nodeinfo[MAX_NUMNODES];
};
+/*
+ * Cgroups above their limits are maintained in a RB-Tree, independent of
+ * their hierarchy representation
+ */
+
+struct mem_cgroup_tree_per_zone {
+ struct rb_root rb_root;
+ spinlock_t lock;
+};
+
+struct mem_cgroup_tree_per_node {
+ struct mem_cgroup_tree_per_zone rb_tree_per_zone[MAX_NR_ZONES];
+};
+
+struct mem_cgroup_tree {
+ struct mem_cgroup_tree_per_node *rb_tree_per_node[MAX_NUMNODES];
+};
+
+static struct mem_cgroup_tree soft_limit_tree __read_mostly;
+
/*
* The memory controller data structure. The memory controller controls both
* page cache and RSS per cgroup. We would eventually like to provide
struct mem_cgroup_stat stat;
};
+/*
+ * Maximum loops in mem_cgroup_hierarchical_reclaim(), used for soft
+ * limit reclaim to prevent infinite loops, if they ever occur.
+ */
+#define MEM_CGROUP_MAX_RECLAIM_LOOPS (100)
+#define MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS (2)
+
enum charge_type {
MEM_CGROUP_CHARGE_TYPE_CACHE = 0,
MEM_CGROUP_CHARGE_TYPE_MAPPED,
#define PCGF_CACHE (1UL << PCG_CACHE)
#define PCGF_USED (1UL << PCG_USED)
#define PCGF_LOCK (1UL << PCG_LOCK)
-static const unsigned long
-pcg_default_flags[NR_CHARGE_TYPE] = {
- PCGF_CACHE | PCGF_USED | PCGF_LOCK, /* File Cache */
- PCGF_USED | PCGF_LOCK, /* Anon */
- PCGF_CACHE | PCGF_USED | PCGF_LOCK, /* Shmem */
- 0, /* FORCE */
-};
+/* Not used, but added here for completeness */
+#define PCGF_ACCT (1UL << PCG_ACCT)
/* for encoding cft->private value on file */
#define _MEM (0)
#define MEMFILE_TYPE(val) (((val) >> 16) & 0xffff)
#define MEMFILE_ATTR(val) ((val) & 0xffff)
+/*
+ * Reclaim flags for mem_cgroup_hierarchical_reclaim
+ */
+#define MEM_CGROUP_RECLAIM_NOSWAP_BIT 0x0
+#define MEM_CGROUP_RECLAIM_NOSWAP (1 << MEM_CGROUP_RECLAIM_NOSWAP_BIT)
+#define MEM_CGROUP_RECLAIM_SHRINK_BIT 0x1
+#define MEM_CGROUP_RECLAIM_SHRINK (1 << MEM_CGROUP_RECLAIM_SHRINK_BIT)
+#define MEM_CGROUP_RECLAIM_SOFT_BIT 0x2
+#define MEM_CGROUP_RECLAIM_SOFT (1 << MEM_CGROUP_RECLAIM_SOFT_BIT)
+
static void mem_cgroup_get(struct mem_cgroup *mem);
static void mem_cgroup_put(struct mem_cgroup *mem);
static struct mem_cgroup *parent_mem_cgroup(struct mem_cgroup *mem);
+static struct mem_cgroup_per_zone *
+mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
+{
+ return &mem->info.nodeinfo[nid]->zoneinfo[zid];
+}
+
+static struct mem_cgroup_per_zone *
+page_cgroup_zoneinfo(struct page_cgroup *pc)
+{
+ struct mem_cgroup *mem = pc->mem_cgroup;
+ int nid = page_cgroup_nid(pc);
+ int zid = page_cgroup_zid(pc);
+
+ if (!mem)
+ return NULL;
+
+ return mem_cgroup_zoneinfo(mem, nid, zid);
+}
+
+static struct mem_cgroup_tree_per_zone *
+soft_limit_tree_node_zone(int nid, int zid)
+{
+ return &soft_limit_tree.rb_tree_per_node[nid]->rb_tree_per_zone[zid];
+}
+
+static struct mem_cgroup_tree_per_zone *
+soft_limit_tree_from_page(struct page *page)
+{
+ int nid = page_to_nid(page);
+ int zid = page_zonenum(page);
+
+ return &soft_limit_tree.rb_tree_per_node[nid]->rb_tree_per_zone[zid];
+}
+
+static void
+__mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
+ struct mem_cgroup_per_zone *mz,
+ struct mem_cgroup_tree_per_zone *mctz,
+ unsigned long long new_usage_in_excess)
+{
+ struct rb_node **p = &mctz->rb_root.rb_node;
+ struct rb_node *parent = NULL;
+ struct mem_cgroup_per_zone *mz_node;
+
+ if (mz->on_tree)
+ return;
+
+ mz->usage_in_excess = new_usage_in_excess;
+ if (!mz->usage_in_excess)
+ return;
+ while (*p) {
+ parent = *p;
+ mz_node = rb_entry(parent, struct mem_cgroup_per_zone,
+ tree_node);
+ if (mz->usage_in_excess < mz_node->usage_in_excess)
+ p = &(*p)->rb_left;
+ /*
+ * We can't avoid mem cgroups that are over their soft
+ * limit by the same amount
+ */
+ else if (mz->usage_in_excess >= mz_node->usage_in_excess)
+ p = &(*p)->rb_right;
+ }
+ rb_link_node(&mz->tree_node, parent, p);
+ rb_insert_color(&mz->tree_node, &mctz->rb_root);
+ mz->on_tree = true;
+}
+
+static void
+__mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
+ struct mem_cgroup_per_zone *mz,
+ struct mem_cgroup_tree_per_zone *mctz)
+{
+ if (!mz->on_tree)
+ return;
+ rb_erase(&mz->tree_node, &mctz->rb_root);
+ mz->on_tree = false;
+}
+
+static void
+mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
+ struct mem_cgroup_per_zone *mz,
+ struct mem_cgroup_tree_per_zone *mctz)
+{
+ spin_lock(&mctz->lock);
+ __mem_cgroup_remove_exceeded(mem, mz, mctz);
+ spin_unlock(&mctz->lock);
+}
+
+static bool mem_cgroup_soft_limit_check(struct mem_cgroup *mem)
+{
+ bool ret = false;
+ int cpu;
+ s64 val;
+ struct mem_cgroup_stat_cpu *cpustat;
+
+ cpu = get_cpu();
+ cpustat = &mem->stat.cpustat[cpu];
+ val = __mem_cgroup_stat_read_local(cpustat, MEM_CGROUP_STAT_EVENTS);
+ if (unlikely(val > SOFTLIMIT_EVENTS_THRESH)) {
+ __mem_cgroup_stat_reset_safe(cpustat, MEM_CGROUP_STAT_EVENTS);
+ ret = true;
+ }
+ put_cpu();
+ return ret;
+}
+
+static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page)
+{
+ unsigned long long excess;
+ struct mem_cgroup_per_zone *mz;
+ struct mem_cgroup_tree_per_zone *mctz;
+ int nid = page_to_nid(page);
+ int zid = page_zonenum(page);
+ mctz = soft_limit_tree_from_page(page);
+
+ /*
+ * Necessary to update all ancestors when hierarchy is used.
+ * because their event counter is not touched.
+ */
+ for (; mem; mem = parent_mem_cgroup(mem)) {
+ mz = mem_cgroup_zoneinfo(mem, nid, zid);
+ excess = res_counter_soft_limit_excess(&mem->res);
+ /*
+ * We have to update the tree if mz is on RB-tree or
+ * mem is over its softlimit.
+ */
+ if (excess || mz->on_tree) {
+ spin_lock(&mctz->lock);
+ /* if on-tree, remove it */
+ if (mz->on_tree)
+ __mem_cgroup_remove_exceeded(mem, mz, mctz);
+ /*
+ * Insert again. mz->usage_in_excess will be updated.
+ * If excess is 0, no tree ops.
+ */
+ __mem_cgroup_insert_exceeded(mem, mz, mctz, excess);
+ spin_unlock(&mctz->lock);
+ }
+ }
+}
+
+static void mem_cgroup_remove_from_trees(struct mem_cgroup *mem)
+{
+ int node, zone;
+ struct mem_cgroup_per_zone *mz;
+ struct mem_cgroup_tree_per_zone *mctz;
+
+ for_each_node_state(node, N_POSSIBLE) {
+ for (zone = 0; zone < MAX_NR_ZONES; zone++) {
+ mz = mem_cgroup_zoneinfo(mem, node, zone);
+ mctz = soft_limit_tree_node_zone(node, zone);
+ mem_cgroup_remove_exceeded(mem, mz, mctz);
+ }
+ }
+}
+
+static inline unsigned long mem_cgroup_get_excess(struct mem_cgroup *mem)
+{
+ return res_counter_soft_limit_excess(&mem->res) >> PAGE_SHIFT;
+}
+
+static struct mem_cgroup_per_zone *
+__mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
+{
+ struct rb_node *rightmost = NULL;
+ struct mem_cgroup_per_zone *mz;
+
+retry:
+ mz = NULL;
+ rightmost = rb_last(&mctz->rb_root);
+ if (!rightmost)
+ goto done; /* Nothing to reclaim from */
+
+ mz = rb_entry(rightmost, struct mem_cgroup_per_zone, tree_node);
+ /*
+ * Remove the node now but someone else can add it back,
+ * we will to add it back at the end of reclaim to its correct
+ * position in the tree.
+ */
+ __mem_cgroup_remove_exceeded(mz->mem, mz, mctz);
+ if (!res_counter_soft_limit_excess(&mz->mem->res) ||
+ !css_tryget(&mz->mem->css))
+ goto retry;
+done:
+ return mz;
+}
+
+static struct mem_cgroup_per_zone *
+mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
+{
+ struct mem_cgroup_per_zone *mz;
+
+ spin_lock(&mctz->lock);
+ mz = __mem_cgroup_largest_soft_limit_node(mctz);
+ spin_unlock(&mctz->lock);
+ return mz;
+}
+
+static void mem_cgroup_swap_statistics(struct mem_cgroup *mem,
+ bool charge)
+{
+ int val = (charge) ? 1 : -1;
+ struct mem_cgroup_stat *stat = &mem->stat;
+ struct mem_cgroup_stat_cpu *cpustat;
+ int cpu = get_cpu();
+
+ cpustat = &stat->cpustat[cpu];
+ __mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_SWAPOUT, val);
+ put_cpu();
+}
+
static void mem_cgroup_charge_statistics(struct mem_cgroup *mem,
struct page_cgroup *pc,
bool charge)
{
- int val = (charge)? 1 : -1;
+ int val = (charge) ? 1 : -1;
struct mem_cgroup_stat *stat = &mem->stat;
struct mem_cgroup_stat_cpu *cpustat;
int cpu = get_cpu();
else
__mem_cgroup_stat_add_safe(cpustat,
MEM_CGROUP_STAT_PGPGOUT_COUNT, 1);
+ __mem_cgroup_stat_add_safe(cpustat, MEM_CGROUP_STAT_EVENTS, 1);
put_cpu();
}
-static struct mem_cgroup_per_zone *
-mem_cgroup_zoneinfo(struct mem_cgroup *mem, int nid, int zid)
-{
- return &mem->info.nodeinfo[nid]->zoneinfo[zid];
-}
-
-static struct mem_cgroup_per_zone *
-page_cgroup_zoneinfo(struct page_cgroup *pc)
-{
- struct mem_cgroup *mem = pc->mem_cgroup;
- int nid = page_cgroup_nid(pc);
- int zid = page_cgroup_zid(pc);
-
- if (!mem)
- return NULL;
-
- return mem_cgroup_zoneinfo(mem, nid, zid);
-}
-
static unsigned long mem_cgroup_get_local_zonestat(struct mem_cgroup *mem,
enum lru_list idx)
{
return ret;
}
+static inline bool mem_cgroup_is_root(struct mem_cgroup *mem)
+{
+ return (mem == root_mem_cgroup);
+}
+
/*
* Following LRU functions are allowed to be used without PCG_LOCK.
* Operations are called by routine of global LRU independently from memcg.
void mem_cgroup_del_lru_list(struct page *page, enum lru_list lru)
{
struct page_cgroup *pc;
- struct mem_cgroup *mem;
struct mem_cgroup_per_zone *mz;
if (mem_cgroup_disabled())
return;
pc = lookup_page_cgroup(page);
/* can happen while we handle swapcache. */
- if (list_empty(&pc->lru) || !pc->mem_cgroup)
+ if (!TestClearPageCgroupAcctLRU(pc))
return;
+ VM_BUG_ON(!pc->mem_cgroup);
/*
* We don't check PCG_USED bit. It's cleared when the "page" is finally
* removed from global LRU.
*/
mz = page_cgroup_zoneinfo(pc);
- mem = pc->mem_cgroup;
MEM_CGROUP_ZSTAT(mz, lru) -= 1;
+ if (mem_cgroup_is_root(pc->mem_cgroup))
+ return;
+ VM_BUG_ON(list_empty(&pc->lru));
list_del_init(&pc->lru);
return;
}
* For making pc->mem_cgroup visible, insert smp_rmb() here.
*/
smp_rmb();
- /* unused page is not rotated. */
- if (!PageCgroupUsed(pc))
+ /* unused or root page is not rotated. */
+ if (!PageCgroupUsed(pc) || mem_cgroup_is_root(pc->mem_cgroup))
return;
mz = page_cgroup_zoneinfo(pc);
list_move(&pc->lru, &mz->lists[lru]);
if (mem_cgroup_disabled())
return;
pc = lookup_page_cgroup(page);
+ VM_BUG_ON(PageCgroupAcctLRU(pc));
/*
* Used bit is set without atomic ops but after smp_wmb().
* For making pc->mem_cgroup visible, insert smp_rmb() here.
mz = page_cgroup_zoneinfo(pc);
MEM_CGROUP_ZSTAT(mz, lru) += 1;
+ SetPageCgroupAcctLRU(pc);
+ if (mem_cgroup_is_root(pc->mem_cgroup))
+ return;
list_add(&pc->lru, &mz->lists[lru]);
}
spin_lock_irqsave(&zone->lru_lock, flags);
/* link when the page is linked to LRU but page_cgroup isn't */
- if (PageLRU(page) && list_empty(&pc->lru))
+ if (PageLRU(page) && !PageCgroupAcctLRU(pc))
mem_cgroup_add_lru_list(page, page_lru(page));
spin_unlock_irqrestore(&zone->lru_lock, flags);
}
* If shrink==true, for avoiding to free too much, this returns immedieately.
*/
static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem,
- gfp_t gfp_mask, bool noswap, bool shrink)
+ struct zone *zone,
+ gfp_t gfp_mask,
+ unsigned long reclaim_options)
{
struct mem_cgroup *victim;
int ret, total = 0;
int loop = 0;
+ bool noswap = reclaim_options & MEM_CGROUP_RECLAIM_NOSWAP;
+ bool shrink = reclaim_options & MEM_CGROUP_RECLAIM_SHRINK;
+ bool check_soft = reclaim_options & MEM_CGROUP_RECLAIM_SOFT;
+ unsigned long excess = mem_cgroup_get_excess(root_mem);
/* If memsw_is_minimum==1, swap-out is of-no-use. */
if (root_mem->memsw_is_minimum)
noswap = true;
- while (loop < 2) {
+ while (1) {
victim = mem_cgroup_select_victim(root_mem);
- if (victim == root_mem)
+ if (victim == root_mem) {
loop++;
+ if (loop >= 2) {
+ /*
+ * If we have not been able to reclaim
+ * anything, it might because there are
+ * no reclaimable pages under this hierarchy
+ */
+ if (!check_soft || !total) {
+ css_put(&victim->css);
+ break;
+ }
+ /*
+ * We want to do more targetted reclaim.
+ * excess >> 2 is not to excessive so as to
+ * reclaim too much, nor too less that we keep
+ * coming back to reclaim from this cgroup
+ */
+ if (total >= (excess >> 2) ||
+ (loop > MEM_CGROUP_MAX_RECLAIM_LOOPS)) {
+ css_put(&victim->css);
+ break;
+ }
+ }
+ }
if (!mem_cgroup_local_usage(&victim->stat)) {
/* this cgroup's local usage == 0 */
css_put(&victim->css);
continue;
}
/* we use swappiness of local cgroup */
- ret = try_to_free_mem_cgroup_pages(victim, gfp_mask, noswap,
- get_swappiness(victim));
+ if (check_soft)
+ ret = mem_cgroup_shrink_node_zone(victim, gfp_mask,
+ noswap, get_swappiness(victim), zone,
+ zone->zone_pgdat->node_id);
+ else
+ ret = try_to_free_mem_cgroup_pages(victim, gfp_mask,
+ noswap, get_swappiness(victim));
css_put(&victim->css);
/*
* At shrinking usage, we can't check we should stop here or
if (shrink)
return ret;
total += ret;
- if (mem_cgroup_check_under_limit(root_mem))
+ if (check_soft) {
+ if (res_counter_check_under_soft_limit(&root_mem->res))
+ return total;
+ } else if (mem_cgroup_check_under_limit(root_mem))
return 1 + total;
}
return total;
*/
static int __mem_cgroup_try_charge(struct mm_struct *mm,
gfp_t gfp_mask, struct mem_cgroup **memcg,
- bool oom)
+ bool oom, struct page *page)
{
struct mem_cgroup *mem, *mem_over_limit;
int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
VM_BUG_ON(css_is_removed(&mem->css));
while (1) {
- int ret;
- bool noswap = false;
+ int ret = 0;
+ unsigned long flags = 0;
+ if (mem_cgroup_is_root(mem))
+ goto done;
ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res);
if (likely(!ret)) {
if (!do_swap_account)
break;
/* mem+swap counter fails */
res_counter_uncharge(&mem->res, PAGE_SIZE);
- noswap = true;
+ flags |= MEM_CGROUP_RECLAIM_NOSWAP;
mem_over_limit = mem_cgroup_from_res_counter(fail_res,
memsw);
} else
if (!(gfp_mask & __GFP_WAIT))
goto nomem;
- ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, gfp_mask,
- noswap, false);
+ ret = mem_cgroup_hierarchical_reclaim(mem_over_limit, NULL,
+ gfp_mask, flags);
if (ret)
continue;
goto nomem;
}
}
+ /*
+ * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
+ * if they exceeds softlimit.
+ */
+ if (mem_cgroup_soft_limit_check(mem))
+ mem_cgroup_update_tree(mem, page);
+done:
return 0;
nomem:
css_put(&mem->css);
return -ENOMEM;
}
-
/*
* A helper function to get mem_cgroup from ID. must be called under
* rcu_read_lock(). The caller must check css_is_removed() or some if
lock_page_cgroup(pc);
if (unlikely(PageCgroupUsed(pc))) {
unlock_page_cgroup(pc);
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- if (do_swap_account)
- res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(mem)) {
+ res_counter_uncharge(&mem->res, PAGE_SIZE);
+ if (do_swap_account)
+ res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ }
css_put(&mem->css);
return;
}
+
pc->mem_cgroup = mem;
+ /*
+ * We access a page_cgroup asynchronously without lock_page_cgroup().
+ * Especially when a page_cgroup is taken from a page, pc->mem_cgroup
+ * is accessed after testing USED bit. To make pc->mem_cgroup visible
+ * before USED bit, we need memory barrier here.
+ * See mem_cgroup_add_lru_list(), etc.
+ */
smp_wmb();
- pc->flags = pcg_default_flags[ctype];
+ switch (ctype) {
+ case MEM_CGROUP_CHARGE_TYPE_CACHE:
+ case MEM_CGROUP_CHARGE_TYPE_SHMEM:
+ SetPageCgroupCache(pc);
+ SetPageCgroupUsed(pc);
+ break;
+ case MEM_CGROUP_CHARGE_TYPE_MAPPED:
+ ClearPageCgroupCache(pc);
+ SetPageCgroupUsed(pc);
+ break;
+ default:
+ break;
+ }
mem_cgroup_charge_statistics(mem, pc, true);
if (pc->mem_cgroup != from)
goto out;
- res_counter_uncharge(&from->res, PAGE_SIZE);
+ if (!mem_cgroup_is_root(from))
+ res_counter_uncharge(&from->res, PAGE_SIZE);
mem_cgroup_charge_statistics(from, pc, false);
page = pc->page;
1);
}
- if (do_swap_account)
+ if (do_swap_account && !mem_cgroup_is_root(from))
res_counter_uncharge(&from->memsw, PAGE_SIZE);
css_put(&from->css);
parent = mem_cgroup_from_cont(pcg);
- ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false);
+ ret = __mem_cgroup_try_charge(NULL, gfp_mask, &parent, false, page);
if (ret || !parent)
return ret;
/* drop extra refcnt by try_charge() */
css_put(&parent->css);
/* uncharge if move fails */
- res_counter_uncharge(&parent->res, PAGE_SIZE);
- if (do_swap_account)
- res_counter_uncharge(&parent->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(parent)) {
+ res_counter_uncharge(&parent->res, PAGE_SIZE);
+ if (do_swap_account)
+ res_counter_uncharge(&parent->memsw, PAGE_SIZE);
+ }
return ret;
}
prefetchw(pc);
mem = memcg;
- ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true);
+ ret = __mem_cgroup_try_charge(mm, gfp_mask, &mem, true, page);
if (ret || !mem)
return ret;
if (!mem)
goto charge_cur_mm;
*ptr = mem;
- ret = __mem_cgroup_try_charge(NULL, mask, ptr, true);
+ ret = __mem_cgroup_try_charge(NULL, mask, ptr, true, page);
/* drop extra refcnt from tryget */
css_put(&mem->css);
return ret;
charge_cur_mm:
if (unlikely(!mm))
mm = &init_mm;
- return __mem_cgroup_try_charge(mm, mask, ptr, true);
+ return __mem_cgroup_try_charge(mm, mask, ptr, true, page);
}
static void
* This recorded memcg can be obsolete one. So, avoid
* calling css_tryget
*/
- res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(memcg))
+ res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
+ mem_cgroup_swap_statistics(memcg, false);
mem_cgroup_put(memcg);
}
rcu_read_unlock();
return;
if (!mem)
return;
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- if (do_swap_account)
- res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(mem)) {
+ res_counter_uncharge(&mem->res, PAGE_SIZE);
+ if (do_swap_account)
+ res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ }
css_put(&mem->css);
}
break;
}
- res_counter_uncharge(&mem->res, PAGE_SIZE);
- if (do_swap_account && (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT))
- res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(mem)) {
+ res_counter_uncharge(&mem->res, PAGE_SIZE);
+ if (do_swap_account &&
+ (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT))
+ res_counter_uncharge(&mem->memsw, PAGE_SIZE);
+ }
+ if (ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
+ mem_cgroup_swap_statistics(mem, true);
mem_cgroup_charge_statistics(mem, pc, false);
ClearPageCgroupUsed(pc);
mz = page_cgroup_zoneinfo(pc);
unlock_page_cgroup(pc);
+ if (mem_cgroup_soft_limit_check(mem))
+ mem_cgroup_update_tree(mem, page);
/* at swapout, this memcg will be accessed to record to swap */
if (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
css_put(&mem->css);
* We uncharge this because swap is freed.
* This memcg can be obsolete one. We avoid calling css_tryget
*/
- res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
+ if (!mem_cgroup_is_root(memcg))
+ res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
+ mem_cgroup_swap_statistics(memcg, false);
mem_cgroup_put(memcg);
}
rcu_read_unlock();
unlock_page_cgroup(pc);
if (mem) {
- ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false);
+ ret = __mem_cgroup_try_charge(NULL, GFP_KERNEL, &mem, false,
+ page);
css_put(&mem->css);
}
*ptr = mem;
if (!ret)
break;
- progress = mem_cgroup_hierarchical_reclaim(memcg, GFP_KERNEL,
- false, true);
+ progress = mem_cgroup_hierarchical_reclaim(memcg, NULL,
+ GFP_KERNEL,
+ MEM_CGROUP_RECLAIM_SHRINK);
curusage = res_counter_read_u64(&memcg->res, RES_USAGE);
/* Usage is reduced ? */
if (curusage >= oldusage)
if (!ret)
break;
- mem_cgroup_hierarchical_reclaim(memcg, GFP_KERNEL, true, true);
+ mem_cgroup_hierarchical_reclaim(memcg, NULL, GFP_KERNEL,
+ MEM_CGROUP_RECLAIM_NOSWAP |
+ MEM_CGROUP_RECLAIM_SHRINK);
curusage = res_counter_read_u64(&memcg->memsw, RES_USAGE);
/* Usage is reduced ? */
if (curusage >= oldusage)
return ret;
}
+unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
+ gfp_t gfp_mask, int nid,
+ int zid)
+{
+ unsigned long nr_reclaimed = 0;
+ struct mem_cgroup_per_zone *mz, *next_mz = NULL;
+ unsigned long reclaimed;
+ int loop = 0;
+ struct mem_cgroup_tree_per_zone *mctz;
+ unsigned long long excess;
+
+ if (order > 0)
+ return 0;
+
+ mctz = soft_limit_tree_node_zone(nid, zid);
+ /*
+ * This loop can run a while, specially if mem_cgroup's continuously
+ * keep exceeding their soft limit and putting the system under
+ * pressure
+ */
+ do {
+ if (next_mz)
+ mz = next_mz;
+ else
+ mz = mem_cgroup_largest_soft_limit_node(mctz);
+ if (!mz)
+ break;
+
+ reclaimed = mem_cgroup_hierarchical_reclaim(mz->mem, zone,
+ gfp_mask,
+ MEM_CGROUP_RECLAIM_SOFT);
+ nr_reclaimed += reclaimed;
+ spin_lock(&mctz->lock);
+
+ /*
+ * If we failed to reclaim anything from this memory cgroup
+ * it is time to move on to the next cgroup
+ */
+ next_mz = NULL;
+ if (!reclaimed) {
+ do {
+ /*
+ * Loop until we find yet another one.
+ *
+ * By the time we get the soft_limit lock
+ * again, someone might have aded the
+ * group back on the RB tree. Iterate to
+ * make sure we get a different mem.
+ * mem_cgroup_largest_soft_limit_node returns
+ * NULL if no other cgroup is present on
+ * the tree
+ */
+ next_mz =
+ __mem_cgroup_largest_soft_limit_node(mctz);
+ if (next_mz == mz) {
+ css_put(&next_mz->mem->css);
+ next_mz = NULL;
+ } else /* next_mz == NULL or other memcg */
+ break;
+ } while (1);
+ }
+ __mem_cgroup_remove_exceeded(mz->mem, mz, mctz);
+ excess = res_counter_soft_limit_excess(&mz->mem->res);
+ /*
+ * One school of thought says that we should not add
+ * back the node to the tree if reclaim returns 0.
+ * But our reclaim could return 0, simply because due
+ * to priority we are exposing a smaller subset of
+ * memory to reclaim from. Consider this as a longer
+ * term TODO.
+ */
+ /* If excess == 0, no tree ops */
+ __mem_cgroup_insert_exceeded(mz->mem, mz, mctz, excess);
+ spin_unlock(&mctz->lock);
+ css_put(&mz->mem->css);
+ loop++;
+ /*
+ * Could not reclaim anything and there are no more
+ * mem cgroups to try or we seem to be looping without
+ * reclaiming anything.
+ */
+ if (!nr_reclaimed &&
+ (next_mz == NULL ||
+ loop > MEM_CGROUP_MAX_SOFT_LIMIT_RECLAIM_LOOPS))
+ break;
+ } while (!nr_reclaimed);
+ if (next_mz)
+ css_put(&next_mz->mem->css);
+ return nr_reclaimed;
+}
+
/*
* This routine traverse page_cgroup in given list and drop them all.
* *And* this routine doesn't reclaim page itself, just removes page_cgroup.
return retval;
}
+struct mem_cgroup_idx_data {
+ s64 val;
+ enum mem_cgroup_stat_index idx;
+};
+
+static int
+mem_cgroup_get_idx_stat(struct mem_cgroup *mem, void *data)
+{
+ struct mem_cgroup_idx_data *d = data;
+ d->val += mem_cgroup_read_stat(&mem->stat, d->idx);
+ return 0;
+}
+
+static void
+mem_cgroup_get_recursive_idx_stat(struct mem_cgroup *mem,
+ enum mem_cgroup_stat_index idx, s64 *val)
+{
+ struct mem_cgroup_idx_data d;
+ d.idx = idx;
+ d.val = 0;
+ mem_cgroup_walk_tree(mem, &d, mem_cgroup_get_idx_stat);
+ *val = d.val;
+}
+
static u64 mem_cgroup_read(struct cgroup *cont, struct cftype *cft)
{
struct mem_cgroup *mem = mem_cgroup_from_cont(cont);
- u64 val = 0;
+ u64 idx_val, val;
int type, name;
type = MEMFILE_TYPE(cft->private);
name = MEMFILE_ATTR(cft->private);
switch (type) {
case _MEM:
- val = res_counter_read_u64(&mem->res, name);
+ if (name == RES_USAGE && mem_cgroup_is_root(mem)) {
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_CACHE, &idx_val);
+ val = idx_val;
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_RSS, &idx_val);
+ val += idx_val;
+ val <<= PAGE_SHIFT;
+ } else
+ val = res_counter_read_u64(&mem->res, name);
break;
case _MEMSWAP:
- val = res_counter_read_u64(&mem->memsw, name);
+ if (name == RES_USAGE && mem_cgroup_is_root(mem)) {
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_CACHE, &idx_val);
+ val = idx_val;
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_RSS, &idx_val);
+ val += idx_val;
+ mem_cgroup_get_recursive_idx_stat(mem,
+ MEM_CGROUP_STAT_SWAPOUT, &idx_val);
+ val <<= PAGE_SHIFT;
+ } else
+ val = res_counter_read_u64(&mem->memsw, name);
break;
default:
BUG();
name = MEMFILE_ATTR(cft->private);
switch (name) {
case RES_LIMIT:
+ if (mem_cgroup_is_root(memcg)) { /* Can't set limit on root */
+ ret = -EINVAL;
+ break;
+ }
/* This function does all necessary parse...reuse it */
ret = res_counter_memparse_write_strategy(buffer, &val);
if (ret)
else
ret = mem_cgroup_resize_memsw_limit(memcg, val);
break;
+ case RES_SOFT_LIMIT:
+ ret = res_counter_memparse_write_strategy(buffer, &val);
+ if (ret)
+ break;
+ /*
+ * For memsw, soft limits are hard to implement in terms
+ * of semantics, for now, we support soft limits for
+ * control without swap
+ */
+ if (type == _MEM)
+ ret = res_counter_set_soft_limit(&memcg->res, val);
+ else
+ ret = -EINVAL;
+ break;
default:
ret = -EINVAL; /* should be BUG() ? */
break;
res_counter_reset_failcnt(&mem->memsw);
break;
}
+
return 0;
}
MCS_MAPPED_FILE,
MCS_PGPGIN,
MCS_PGPGOUT,
+ MCS_SWAP,
MCS_INACTIVE_ANON,
MCS_ACTIVE_ANON,
MCS_INACTIVE_FILE,
{"mapped_file", "total_mapped_file"},
{"pgpgin", "total_pgpgin"},
{"pgpgout", "total_pgpgout"},
+ {"swap", "total_swap"},
{"inactive_anon", "total_inactive_anon"},
{"active_anon", "total_active_anon"},
{"inactive_file", "total_inactive_file"},
s->stat[MCS_PGPGIN] += val;
val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_PGPGOUT_COUNT);
s->stat[MCS_PGPGOUT] += val;
+ if (do_swap_account) {
+ val = mem_cgroup_read_stat(&mem->stat, MEM_CGROUP_STAT_SWAPOUT);
+ s->stat[MCS_SWAP] += val * PAGE_SIZE;
+ }
/* per zone stat */
val = mem_cgroup_get_local_zonestat(mem, LRU_INACTIVE_ANON);
memset(&mystat, 0, sizeof(mystat));
mem_cgroup_get_local_stat(mem_cont, &mystat);
- for (i = 0; i < NR_MCS_STAT; i++)
+ for (i = 0; i < NR_MCS_STAT; i++) {
+ if (i == MCS_SWAP && !do_swap_account)
+ continue;
cb->fill(cb, memcg_stat_strings[i].local_name, mystat.stat[i]);
+ }
/* Hierarchical information */
{
memset(&mystat, 0, sizeof(mystat));
mem_cgroup_get_total_stat(mem_cont, &mystat);
- for (i = 0; i < NR_MCS_STAT; i++)
+ for (i = 0; i < NR_MCS_STAT; i++) {
+ if (i == MCS_SWAP && !do_swap_account)
+ continue;
cb->fill(cb, memcg_stat_strings[i].total_name, mystat.stat[i]);
-
+ }
#ifdef CONFIG_DEBUG_VM
cb->fill(cb, "inactive_ratio", calc_inactive_ratio(mem_cont, NULL));
.write_string = mem_cgroup_write,
.read_u64 = mem_cgroup_read,
},
+ {
+ .name = "soft_limit_in_bytes",
+ .private = MEMFILE_PRIVATE(_MEM, RES_SOFT_LIMIT),
+ .write_string = mem_cgroup_write,
+ .read_u64 = mem_cgroup_read,
+ },
{
.name = "failcnt",
.private = MEMFILE_PRIVATE(_MEM, RES_FAILCNT),
mz = &pn->zoneinfo[zone];
for_each_lru(l)
INIT_LIST_HEAD(&mz->lists[l]);
+ mz->usage_in_excess = 0;
+ mz->on_tree = false;
+ mz->mem = mem;
}
return 0;
}
{
int node;
+ mem_cgroup_remove_from_trees(mem);
free_css_id(&mem_cgroup_subsys, &mem->css);
for_each_node_state(node, N_POSSIBLE)
}
#endif
+static int mem_cgroup_soft_limit_tree_init(void)
+{
+ struct mem_cgroup_tree_per_node *rtpn;
+ struct mem_cgroup_tree_per_zone *rtpz;
+ int tmp, node, zone;
+
+ for_each_node_state(node, N_POSSIBLE) {
+ tmp = node;
+ if (!node_state(node, N_NORMAL_MEMORY))
+ tmp = -1;
+ rtpn = kzalloc_node(sizeof(*rtpn), GFP_KERNEL, tmp);
+ if (!rtpn)
+ return 1;
+
+ soft_limit_tree.rb_tree_per_node[node] = rtpn;
+
+ for (zone = 0; zone < MAX_NR_ZONES; zone++) {
+ rtpz = &rtpn->rb_tree_per_zone[zone];
+ rtpz->rb_root = RB_ROOT;
+ spin_lock_init(&rtpz->lock);
+ }
+ }
+ return 0;
+}
+
static struct cgroup_subsys_state * __ref
mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont)
{
for_each_node_state(node, N_POSSIBLE)
if (alloc_mem_cgroup_per_zone_info(mem, node))
goto free_out;
+
/* root ? */
if (cont->parent == NULL) {
enable_swap_cgroup();
parent = NULL;
+ root_mem_cgroup = mem;
+ if (mem_cgroup_soft_limit_tree_init())
+ goto free_out;
+
} else {
parent = mem_cgroup_from_cont(cont->parent);
mem->use_hierarchy = parent->use_hierarchy;
return &mem->css;
free_out:
__mem_cgroup_free(mem);
+ root_mem_cgroup = NULL;
return ERR_PTR(error);
}
static void mem_cgroup_move_task(struct cgroup_subsys *ss,
struct cgroup *cont,
struct cgroup *old_cont,
- struct task_struct *p)
+ struct task_struct *p,
+ bool threadgroup)
{
mutex_lock(&memcg_tasklist);
/*
--- /dev/null
+/*
+ * Copyright (C) 2008, 2009 Intel Corporation
+ * Authors: Andi Kleen, Fengguang Wu
+ *
+ * This software may be redistributed and/or modified under the terms of
+ * the GNU General Public License ("GPL") version 2 only as published by the
+ * Free Software Foundation.
+ *
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * The operation to map back from RMAP chains to processes has to walk
+ * the complete process list and has non linear complexity with the number
+ * mappings. In short it can be quite slow. But since memory corruptions
+ * are rare we hope to get away with this.
+ */
+
+/*
+ * Notebook:
+ * - hugetlb needs more code
+ * - kcore/oldmem/vmcore/mem/kmem check for hwpoison pages
+ * - pass bad pages to kdump next kernel
+ */
+#define DEBUG 1 /* remove me in 2.6.34 */
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/page-flags.h>
+#include <linux/sched.h>
+#include <linux/ksm.h>
+#include <linux/rmap.h>
+#include <linux/pagemap.h>
+#include <linux/swap.h>
+#include <linux/backing-dev.h>
+#include "internal.h"
+
+int sysctl_memory_failure_early_kill __read_mostly = 0;
+
+int sysctl_memory_failure_recovery __read_mostly = 1;
+
+atomic_long_t mce_bad_pages __read_mostly = ATOMIC_LONG_INIT(0);
+
+/*
+ * Send all the processes who have the page mapped an ``action optional''
+ * signal.
+ */
+static int kill_proc_ao(struct task_struct *t, unsigned long addr, int trapno,
+ unsigned long pfn)
+{
+ struct siginfo si;
+ int ret;
+
+ printk(KERN_ERR
+ "MCE %#lx: Killing %s:%d early due to hardware memory corruption\n",
+ pfn, t->comm, t->pid);
+ si.si_signo = SIGBUS;
+ si.si_errno = 0;
+ si.si_code = BUS_MCEERR_AO;
+ si.si_addr = (void *)addr;
+#ifdef __ARCH_SI_TRAPNO
+ si.si_trapno = trapno;
+#endif
+ si.si_addr_lsb = PAGE_SHIFT;
+ /*
+ * Don't use force here, it's convenient if the signal
+ * can be temporarily blocked.
+ * This could cause a loop when the user sets SIGBUS
+ * to SIG_IGN, but hopefully noone will do that?
+ */
+ ret = send_sig_info(SIGBUS, &si, t); /* synchronous? */
+ if (ret < 0)
+ printk(KERN_INFO "MCE: Error sending signal to %s:%d: %d\n",
+ t->comm, t->pid, ret);
+ return ret;
+}
+
+/*
+ * Kill all processes that have a poisoned page mapped and then isolate
+ * the page.
+ *
+ * General strategy:
+ * Find all processes having the page mapped and kill them.
+ * But we keep a page reference around so that the page is not
+ * actually freed yet.
+ * Then stash the page away
+ *
+ * There's no convenient way to get back to mapped processes
+ * from the VMAs. So do a brute-force search over all
+ * running processes.
+ *
+ * Remember that machine checks are not common (or rather
+ * if they are common you have other problems), so this shouldn't
+ * be a performance issue.
+ *
+ * Also there are some races possible while we get from the
+ * error detection to actually handle it.
+ */
+
+struct to_kill {
+ struct list_head nd;
+ struct task_struct *tsk;
+ unsigned long addr;
+ unsigned addr_valid:1;
+};
+
+/*
+ * Failure handling: if we can't find or can't kill a process there's
+ * not much we can do. We just print a message and ignore otherwise.
+ */
+
+/*
+ * Schedule a process for later kill.
+ * Uses GFP_ATOMIC allocations to avoid potential recursions in the VM.
+ * TBD would GFP_NOIO be enough?
+ */
+static void add_to_kill(struct task_struct *tsk, struct page *p,
+ struct vm_area_struct *vma,
+ struct list_head *to_kill,
+ struct to_kill **tkc)
+{
+ struct to_kill *tk;
+
+ if (*tkc) {
+ tk = *tkc;
+ *tkc = NULL;
+ } else {
+ tk = kmalloc(sizeof(struct to_kill), GFP_ATOMIC);
+ if (!tk) {
+ printk(KERN_ERR
+ "MCE: Out of memory while machine check handling\n");
+ return;
+ }
+ }
+ tk->addr = page_address_in_vma(p, vma);
+ tk->addr_valid = 1;
+
+ /*
+ * In theory we don't have to kill when the page was
+ * munmaped. But it could be also a mremap. Since that's
+ * likely very rare kill anyways just out of paranoia, but use
+ * a SIGKILL because the error is not contained anymore.
+ */
+ if (tk->addr == -EFAULT) {
+ pr_debug("MCE: Unable to find user space address %lx in %s\n",
+ page_to_pfn(p), tsk->comm);
+ tk->addr_valid = 0;
+ }
+ get_task_struct(tsk);
+ tk->tsk = tsk;
+ list_add_tail(&tk->nd, to_kill);
+}
+
+/*
+ * Kill the processes that have been collected earlier.
+ *
+ * Only do anything when DOIT is set, otherwise just free the list
+ * (this is used for clean pages which do not need killing)
+ * Also when FAIL is set do a force kill because something went
+ * wrong earlier.
+ */
+static void kill_procs_ao(struct list_head *to_kill, int doit, int trapno,
+ int fail, unsigned long pfn)
+{
+ struct to_kill *tk, *next;
+
+ list_for_each_entry_safe (tk, next, to_kill, nd) {
+ if (doit) {
+ /*
+ * In case something went wrong with munmaping
+ * make sure the process doesn't catch the
+ * signal and then access the memory. Just kill it.
+ * the signal handlers
+ */
+ if (fail || tk->addr_valid == 0) {
+ printk(KERN_ERR
+ "MCE %#lx: forcibly killing %s:%d because of failure to unmap corrupted page\n",
+ pfn, tk->tsk->comm, tk->tsk->pid);
+ force_sig(SIGKILL, tk->tsk);
+ }
+
+ /*
+ * In theory the process could have mapped
+ * something else on the address in-between. We could
+ * check for that, but we need to tell the
+ * process anyways.
+ */
+ else if (kill_proc_ao(tk->tsk, tk->addr, trapno,
+ pfn) < 0)
+ printk(KERN_ERR
+ "MCE %#lx: Cannot send advisory machine check signal to %s:%d\n",
+ pfn, tk->tsk->comm, tk->tsk->pid);
+ }
+ put_task_struct(tk->tsk);
+ kfree(tk);
+ }
+}
+
+static int task_early_kill(struct task_struct *tsk)
+{
+ if (!tsk->mm)
+ return 0;
+ if (tsk->flags & PF_MCE_PROCESS)
+ return !!(tsk->flags & PF_MCE_EARLY);
+ return sysctl_memory_failure_early_kill;
+}
+
+/*
+ * Collect processes when the error hit an anonymous page.
+ */
+static void collect_procs_anon(struct page *page, struct list_head *to_kill,
+ struct to_kill **tkc)
+{
+ struct vm_area_struct *vma;
+ struct task_struct *tsk;
+ struct anon_vma *av;
+
+ read_lock(&tasklist_lock);
+ av = page_lock_anon_vma(page);
+ if (av == NULL) /* Not actually mapped anymore */
+ goto out;
+ for_each_process (tsk) {
+ if (!task_early_kill(tsk))
+ continue;
+ list_for_each_entry (vma, &av->head, anon_vma_node) {
+ if (!page_mapped_in_vma(page, vma))
+ continue;
+ if (vma->vm_mm == tsk->mm)
+ add_to_kill(tsk, page, vma, to_kill, tkc);
+ }
+ }
+ page_unlock_anon_vma(av);
+out:
+ read_unlock(&tasklist_lock);
+}
+
+/*
+ * Collect processes when the error hit a file mapped page.
+ */
+static void collect_procs_file(struct page *page, struct list_head *to_kill,
+ struct to_kill **tkc)
+{
+ struct vm_area_struct *vma;
+ struct task_struct *tsk;
+ struct prio_tree_iter iter;
+ struct address_space *mapping = page->mapping;
+
+ /*
+ * A note on the locking order between the two locks.
+ * We don't rely on this particular order.
+ * If you have some other code that needs a different order
+ * feel free to switch them around. Or add a reverse link
+ * from mm_struct to task_struct, then this could be all
+ * done without taking tasklist_lock and looping over all tasks.
+ */
+
+ read_lock(&tasklist_lock);
+ spin_lock(&mapping->i_mmap_lock);
+ for_each_process(tsk) {
+ pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+
+ if (!task_early_kill(tsk))
+ continue;
+
+ vma_prio_tree_foreach(vma, &iter, &mapping->i_mmap, pgoff,
+ pgoff) {
+ /*
+ * Send early kill signal to tasks where a vma covers
+ * the page but the corrupted page is not necessarily
+ * mapped it in its pte.
+ * Assume applications who requested early kill want
+ * to be informed of all such data corruptions.
+ */
+ if (vma->vm_mm == tsk->mm)
+ add_to_kill(tsk, page, vma, to_kill, tkc);
+ }
+ }
+ spin_unlock(&mapping->i_mmap_lock);
+ read_unlock(&tasklist_lock);
+}
+
+/*
+ * Collect the processes who have the corrupted page mapped to kill.
+ * This is done in two steps for locking reasons.
+ * First preallocate one tokill structure outside the spin locks,
+ * so that we can kill at least one process reasonably reliable.
+ */
+static void collect_procs(struct page *page, struct list_head *tokill)
+{
+ struct to_kill *tk;
+
+ if (!page->mapping)
+ return;
+
+ tk = kmalloc(sizeof(struct to_kill), GFP_NOIO);
+ if (!tk)
+ return;
+ if (PageAnon(page))
+ collect_procs_anon(page, tokill, &tk);
+ else
+ collect_procs_file(page, tokill, &tk);
+ kfree(tk);
+}
+
+/*
+ * Error handlers for various types of pages.
+ */
+
+enum outcome {
+ FAILED, /* Error handling failed */
+ DELAYED, /* Will be handled later */
+ IGNORED, /* Error safely ignored */
+ RECOVERED, /* Successfully recovered */
+};
+
+static const char *action_name[] = {
+ [FAILED] = "Failed",
+ [DELAYED] = "Delayed",
+ [IGNORED] = "Ignored",
+ [RECOVERED] = "Recovered",
+};
+
+/*
+ * Error hit kernel page.
+ * Do nothing, try to be lucky and not touch this instead. For a few cases we
+ * could be more sophisticated.
+ */
+static int me_kernel(struct page *p, unsigned long pfn)
+{
+ return DELAYED;
+}
+
+/*
+ * Already poisoned page.
+ */
+static int me_ignore(struct page *p, unsigned long pfn)
+{
+ return IGNORED;
+}
+
+/*
+ * Page in unknown state. Do nothing.
+ */
+static int me_unknown(struct page *p, unsigned long pfn)
+{
+ printk(KERN_ERR "MCE %#lx: Unknown page state\n", pfn);
+ return FAILED;
+}
+
+/*
+ * Free memory
+ */
+static int me_free(struct page *p, unsigned long pfn)
+{
+ return DELAYED;
+}
+
+/*
+ * Clean (or cleaned) page cache page.
+ */
+static int me_pagecache_clean(struct page *p, unsigned long pfn)
+{
+ int err;
+ int ret = FAILED;
+ struct address_space *mapping;
+
+ /*
+ * For anonymous pages we're done the only reference left
+ * should be the one m_f() holds.
+ */
+ if (PageAnon(p))
+ return RECOVERED;
+
+ /*
+ * Now truncate the page in the page cache. This is really
+ * more like a "temporary hole punch"
+ * Don't do this for block devices when someone else
+ * has a reference, because it could be file system metadata
+ * and that's not safe to truncate.
+ */
+ mapping = page_mapping(p);
+ if (!mapping) {
+ /*
+ * Page has been teared down in the meanwhile
+ */
+ return FAILED;
+ }
+
+ /*
+ * Truncation is a bit tricky. Enable it per file system for now.
+ *
+ * Open: to take i_mutex or not for this? Right now we don't.
+ */
+ if (mapping->a_ops->error_remove_page) {
+ err = mapping->a_ops->error_remove_page(mapping, p);
+ if (err != 0) {
+ printk(KERN_INFO "MCE %#lx: Failed to punch page: %d\n",
+ pfn, err);
+ } else if (page_has_private(p) &&
+ !try_to_release_page(p, GFP_NOIO)) {
+ pr_debug("MCE %#lx: failed to release buffers\n", pfn);
+ } else {
+ ret = RECOVERED;
+ }
+ } else {
+ /*
+ * If the file system doesn't support it just invalidate
+ * This fails on dirty or anything with private pages
+ */
+ if (invalidate_inode_page(p))
+ ret = RECOVERED;
+ else
+ printk(KERN_INFO "MCE %#lx: Failed to invalidate\n",
+ pfn);
+ }
+ return ret;
+}
+
+/*
+ * Dirty cache page page
+ * Issues: when the error hit a hole page the error is not properly
+ * propagated.
+ */
+static int me_pagecache_dirty(struct page *p, unsigned long pfn)
+{
+ struct address_space *mapping = page_mapping(p);
+
+ SetPageError(p);
+ /* TBD: print more information about the file. */
+ if (mapping) {
+ /*
+ * IO error will be reported by write(), fsync(), etc.
+ * who check the mapping.
+ * This way the application knows that something went
+ * wrong with its dirty file data.
+ *
+ * There's one open issue:
+ *
+ * The EIO will be only reported on the next IO
+ * operation and then cleared through the IO map.
+ * Normally Linux has two mechanisms to pass IO error
+ * first through the AS_EIO flag in the address space
+ * and then through the PageError flag in the page.
+ * Since we drop pages on memory failure handling the
+ * only mechanism open to use is through AS_AIO.
+ *
+ * This has the disadvantage that it gets cleared on
+ * the first operation that returns an error, while
+ * the PageError bit is more sticky and only cleared
+ * when the page is reread or dropped. If an
+ * application assumes it will always get error on
+ * fsync, but does other operations on the fd before
+ * and the page is dropped inbetween then the error
+ * will not be properly reported.
+ *
+ * This can already happen even without hwpoisoned
+ * pages: first on metadata IO errors (which only
+ * report through AS_EIO) or when the page is dropped
+ * at the wrong time.
+ *
+ * So right now we assume that the application DTRT on
+ * the first EIO, but we're not worse than other parts
+ * of the kernel.
+ */
+ mapping_set_error(mapping, EIO);
+ }
+
+ return me_pagecache_clean(p, pfn);
+}
+
+/*
+ * Clean and dirty swap cache.
+ *
+ * Dirty swap cache page is tricky to handle. The page could live both in page
+ * cache and swap cache(ie. page is freshly swapped in). So it could be
+ * referenced concurrently by 2 types of PTEs:
+ * normal PTEs and swap PTEs. We try to handle them consistently by calling
+ * try_to_unmap(TTU_IGNORE_HWPOISON) to convert the normal PTEs to swap PTEs,
+ * and then
+ * - clear dirty bit to prevent IO
+ * - remove from LRU
+ * - but keep in the swap cache, so that when we return to it on
+ * a later page fault, we know the application is accessing
+ * corrupted data and shall be killed (we installed simple
+ * interception code in do_swap_page to catch it).
+ *
+ * Clean swap cache pages can be directly isolated. A later page fault will
+ * bring in the known good data from disk.
+ */
+static int me_swapcache_dirty(struct page *p, unsigned long pfn)
+{
+ ClearPageDirty(p);
+ /* Trigger EIO in shmem: */
+ ClearPageUptodate(p);
+
+ return DELAYED;
+}
+
+static int me_swapcache_clean(struct page *p, unsigned long pfn)
+{
+ delete_from_swap_cache(p);
+
+ return RECOVERED;
+}
+
+/*
+ * Huge pages. Needs work.
+ * Issues:
+ * No rmap support so we cannot find the original mapper. In theory could walk
+ * all MMs and look for the mappings, but that would be non atomic and racy.
+ * Need rmap for hugepages for this. Alternatively we could employ a heuristic,
+ * like just walking the current process and hoping it has it mapped (that
+ * should be usually true for the common "shared database cache" case)
+ * Should handle free huge pages and dequeue them too, but this needs to
+ * handle huge page accounting correctly.
+ */
+static int me_huge_page(struct page *p, unsigned long pfn)
+{
+ return FAILED;
+}
+
+/*
+ * Various page states we can handle.
+ *
+ * A page state is defined by its current page->flags bits.
+ * The table matches them in order and calls the right handler.
+ *
+ * This is quite tricky because we can access page at any time
+ * in its live cycle, so all accesses have to be extremly careful.
+ *
+ * This is not complete. More states could be added.
+ * For any missing state don't attempt recovery.
+ */
+
+#define dirty (1UL << PG_dirty)
+#define sc (1UL << PG_swapcache)
+#define unevict (1UL << PG_unevictable)
+#define mlock (1UL << PG_mlocked)
+#define writeback (1UL << PG_writeback)
+#define lru (1UL << PG_lru)
+#define swapbacked (1UL << PG_swapbacked)
+#define head (1UL << PG_head)
+#define tail (1UL << PG_tail)
+#define compound (1UL << PG_compound)
+#define slab (1UL << PG_slab)
+#define buddy (1UL << PG_buddy)
+#define reserved (1UL << PG_reserved)
+
+static struct page_state {
+ unsigned long mask;
+ unsigned long res;
+ char *msg;
+ int (*action)(struct page *p, unsigned long pfn);
+} error_states[] = {
+ { reserved, reserved, "reserved kernel", me_ignore },
+ { buddy, buddy, "free kernel", me_free },
+
+ /*
+ * Could in theory check if slab page is free or if we can drop
+ * currently unused objects without touching them. But just
+ * treat it as standard kernel for now.
+ */
+ { slab, slab, "kernel slab", me_kernel },
+
+#ifdef CONFIG_PAGEFLAGS_EXTENDED
+ { head, head, "huge", me_huge_page },
+ { tail, tail, "huge", me_huge_page },
+#else
+ { compound, compound, "huge", me_huge_page },
+#endif
+
+ { sc|dirty, sc|dirty, "swapcache", me_swapcache_dirty },
+ { sc|dirty, sc, "swapcache", me_swapcache_clean },
+
+ { unevict|dirty, unevict|dirty, "unevictable LRU", me_pagecache_dirty},
+ { unevict, unevict, "unevictable LRU", me_pagecache_clean},
+
+#ifdef CONFIG_HAVE_MLOCKED_PAGE_BIT
+ { mlock|dirty, mlock|dirty, "mlocked LRU", me_pagecache_dirty },
+ { mlock, mlock, "mlocked LRU", me_pagecache_clean },
+#endif
+
+ { lru|dirty, lru|dirty, "LRU", me_pagecache_dirty },
+ { lru|dirty, lru, "clean LRU", me_pagecache_clean },
+ { swapbacked, swapbacked, "anonymous", me_pagecache_clean },
+
+ /*
+ * Catchall entry: must be at end.
+ */
+ { 0, 0, "unknown page state", me_unknown },
+};
+
+static void action_result(unsigned long pfn, char *msg, int result)
+{
+ struct page *page = NULL;
+ if (pfn_valid(pfn))
+ page = pfn_to_page(pfn);
+
+ printk(KERN_ERR "MCE %#lx: %s%s page recovery: %s\n",
+ pfn,
+ page && PageDirty(page) ? "dirty " : "",
+ msg, action_name[result]);
+}
+
+static int page_action(struct page_state *ps, struct page *p,
+ unsigned long pfn, int ref)
+{
+ int result;
+ int count;
+
+ result = ps->action(p, pfn);
+ action_result(pfn, ps->msg, result);
+
+ count = page_count(p) - 1 - ref;
+ if (count != 0)
+ printk(KERN_ERR
+ "MCE %#lx: %s page still referenced by %d users\n",
+ pfn, ps->msg, count);
+
+ /* Could do more checks here if page looks ok */
+ /*
+ * Could adjust zone counters here to correct for the missing page.
+ */
+
+ return result == RECOVERED ? 0 : -EBUSY;
+}
+
+#define N_UNMAP_TRIES 5
+
+/*
+ * Do all that is necessary to remove user space mappings. Unmap
+ * the pages and send SIGBUS to the processes if the data was dirty.
+ */
+static void hwpoison_user_mappings(struct page *p, unsigned long pfn,
+ int trapno)
+{
+ enum ttu_flags ttu = TTU_UNMAP | TTU_IGNORE_MLOCK | TTU_IGNORE_ACCESS;
+ struct address_space *mapping;
+ LIST_HEAD(tokill);
+ int ret;
+ int i;
+ int kill = 1;
+
+ if (PageReserved(p) || PageCompound(p) || PageSlab(p) || PageKsm(p))
+ return;
+
+ /*
+ * This check implies we don't kill processes if their pages
+ * are in the swap cache early. Those are always late kills.
+ */
+ if (!page_mapped(p))
+ return;
+
+ if (PageSwapCache(p)) {
+ printk(KERN_ERR
+ "MCE %#lx: keeping poisoned page in swap cache\n", pfn);
+ ttu |= TTU_IGNORE_HWPOISON;
+ }
+
+ /*
+ * Propagate the dirty bit from PTEs to struct page first, because we
+ * need this to decide if we should kill or just drop the page.
+ */
+ mapping = page_mapping(p);
+ if (!PageDirty(p) && mapping && mapping_cap_writeback_dirty(mapping)) {
+ if (page_mkclean(p)) {
+ SetPageDirty(p);
+ } else {
+ kill = 0;
+ ttu |= TTU_IGNORE_HWPOISON;
+ printk(KERN_INFO
+ "MCE %#lx: corrupted page was clean: dropped without side effects\n",
+ pfn);
+ }
+ }
+
+ /*
+ * First collect all the processes that have the page
+ * mapped in dirty form. This has to be done before try_to_unmap,
+ * because ttu takes the rmap data structures down.
+ *
+ * Error handling: We ignore errors here because
+ * there's nothing that can be done.
+ */
+ if (kill)
+ collect_procs(p, &tokill);
+
+ /*
+ * try_to_unmap can fail temporarily due to races.
+ * Try a few times (RED-PEN better strategy?)
+ */
+ for (i = 0; i < N_UNMAP_TRIES; i++) {
+ ret = try_to_unmap(p, ttu);
+ if (ret == SWAP_SUCCESS)
+ break;
+ pr_debug("MCE %#lx: try_to_unmap retry needed %d\n", pfn, ret);
+ }
+
+ if (ret != SWAP_SUCCESS)
+ printk(KERN_ERR "MCE %#lx: failed to unmap page (mapcount=%d)\n",
+ pfn, page_mapcount(p));
+
+ /*
+ * Now that the dirty bit has been propagated to the
+ * struct page and all unmaps done we can decide if
+ * killing is needed or not. Only kill when the page
+ * was dirty, otherwise the tokill list is merely
+ * freed. When there was a problem unmapping earlier
+ * use a more force-full uncatchable kill to prevent
+ * any accesses to the poisoned memory.
+ */
+ kill_procs_ao(&tokill, !!PageDirty(p), trapno,
+ ret != SWAP_SUCCESS, pfn);
+}
+
+int __memory_failure(unsigned long pfn, int trapno, int ref)
+{
+ unsigned long lru_flag;
+ struct page_state *ps;
+ struct page *p;
+ int res;
+
+ if (!sysctl_memory_failure_recovery)
+ panic("Memory failure from trap %d on page %lx", trapno, pfn);
+
+ if (!pfn_valid(pfn)) {
+ action_result(pfn, "memory outside kernel control", IGNORED);
+ return -EIO;
+ }
+
+ p = pfn_to_page(pfn);
+ if (TestSetPageHWPoison(p)) {
+ action_result(pfn, "already hardware poisoned", IGNORED);
+ return 0;
+ }
+
+ atomic_long_add(1, &mce_bad_pages);
+
+ /*
+ * We need/can do nothing about count=0 pages.
+ * 1) it's a free page, and therefore in safe hand:
+ * prep_new_page() will be the gate keeper.
+ * 2) it's part of a non-compound high order page.
+ * Implies some kernel user: cannot stop them from
+ * R/W the page; let's pray that the page has been
+ * used and will be freed some time later.
+ * In fact it's dangerous to directly bump up page count from 0,
+ * that may make page_freeze_refs()/page_unfreeze_refs() mismatch.
+ */
+ if (!get_page_unless_zero(compound_head(p))) {
+ action_result(pfn, "free or high order kernel", IGNORED);
+ return PageBuddy(compound_head(p)) ? 0 : -EBUSY;
+ }
+
+ /*
+ * We ignore non-LRU pages for good reasons.
+ * - PG_locked is only well defined for LRU pages and a few others
+ * - to avoid races with __set_page_locked()
+ * - to avoid races with __SetPageSlab*() (and more non-atomic ops)
+ * The check (unnecessarily) ignores LRU pages being isolated and
+ * walked by the page reclaim code, however that's not a big loss.
+ */
+ if (!PageLRU(p))
+ lru_add_drain_all();
+ lru_flag = p->flags & lru;
+ if (isolate_lru_page(p)) {
+ action_result(pfn, "non LRU", IGNORED);
+ put_page(p);
+ return -EBUSY;
+ }
+ page_cache_release(p);
+
+ /*
+ * Lock the page and wait for writeback to finish.
+ * It's very difficult to mess with pages currently under IO
+ * and in many cases impossible, so we just avoid it here.
+ */
+ lock_page_nosync(p);
+ wait_on_page_writeback(p);
+
+ /*
+ * Now take care of user space mappings.
+ */
+ hwpoison_user_mappings(p, pfn, trapno);
+
+ /*
+ * Torn down by someone else?
+ */
+ if ((lru_flag & lru) && !PageSwapCache(p) && p->mapping == NULL) {
+ action_result(pfn, "already truncated LRU", IGNORED);
+ res = 0;
+ goto out;
+ }
+
+ res = -EBUSY;
+ for (ps = error_states;; ps++) {
+ if (((p->flags | lru_flag)& ps->mask) == ps->res) {
+ res = page_action(ps, p, pfn, ref);
+ break;
+ }
+ }
+out:
+ unlock_page(p);
+ return res;
+}
+EXPORT_SYMBOL_GPL(__memory_failure);
+
+/**
+ * memory_failure - Handle memory failure of a page.
+ * @pfn: Page Number of the corrupted page
+ * @trapno: Trap number reported in the signal to user space.
+ *
+ * This function is called by the low level machine check code
+ * of an architecture when it detects hardware memory corruption
+ * of a page. It tries its best to recover, which includes
+ * dropping pages, killing processes etc.
+ *
+ * The function is primarily of use for corruptions that
+ * happen outside the current execution context (e.g. when
+ * detected by a background scrubber)
+ *
+ * Must run in process context (e.g. a work queue) with interrupts
+ * enabled and no spinlocks hold.
+ */
+void memory_failure(unsigned long pfn, int trapno)
+{
+ __memory_failure(pfn, trapno, 0);
+}
unsigned long addr = vma->vm_start;
/*
- * Hide vma from rmap and vmtruncate before freeing pgtables
+ * Hide vma from rmap and truncate_pagecache before freeing
+ * pgtables
*/
anon_vma_unlink(vma);
unlink_file_vma(vma);
pmd_t *dst_pmd, pmd_t *src_pmd, struct vm_area_struct *vma,
unsigned long addr, unsigned long end)
{
+ pte_t *orig_src_pte, *orig_dst_pte;
pte_t *src_pte, *dst_pte;
spinlock_t *src_ptl, *dst_ptl;
int progress = 0;
src_pte = pte_offset_map_nested(src_pmd, addr);
src_ptl = pte_lockptr(src_mm, src_pmd);
spin_lock_nested(src_ptl, SINGLE_DEPTH_NESTING);
+ orig_src_pte = src_pte;
+ orig_dst_pte = dst_pte;
arch_enter_lazy_mmu_mode();
do {
arch_leave_lazy_mmu_mode();
spin_unlock(src_ptl);
- pte_unmap_nested(src_pte - 1);
+ pte_unmap_nested(orig_src_pte);
add_mm_rss(dst_mm, rss[0], rss[1]);
- pte_unmap_unlock(dst_pte - 1, dst_ptl);
+ pte_unmap_unlock(orig_dst_pte, dst_ptl);
cond_resched();
if (addr != end)
goto again;
if (ret & VM_FAULT_ERROR) {
if (ret & VM_FAULT_OOM)
return i ? i : -ENOMEM;
- else if (ret & VM_FAULT_SIGBUS)
+ if (ret &
+ (VM_FAULT_HWPOISON|VM_FAULT_SIGBUS))
return i ? i : -EFAULT;
BUG();
}
token = pmd_pgtable(*pmd);
do {
- err = fn(pte, token, addr, data);
+ err = fn(pte++, token, addr, data);
if (err)
break;
- } while (pte++, addr += PAGE_SIZE, addr != end);
+ } while (addr += PAGE_SIZE, addr != end);
arch_leave_lazy_mmu_mode();
* @mapping: the address space containing mmaps to be unmapped.
* @holebegin: byte in first page to unmap, relative to the start of
* the underlying file. This will be rounded down to a PAGE_SIZE
- * boundary. Note that this is different from vmtruncate(), which
+ * boundary. Note that this is different from truncate_pagecache(), which
* must keep the partial page. In contrast, we must get rid of
* partial pages.
* @holelen: size of prospective hole in bytes. This will be rounded
}
EXPORT_SYMBOL(unmap_mapping_range);
-/**
- * vmtruncate - unmap mappings "freed" by truncate() syscall
- * @inode: inode of the file used
- * @offset: file offset to start truncating
- *
- * NOTE! We have to be ready to update the memory sharing
- * between the file and the memory map for a potential last
- * incomplete page. Ugly, but necessary.
- */
-int vmtruncate(struct inode * inode, loff_t offset)
-{
- if (inode->i_size < offset) {
- unsigned long limit;
-
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit)
- goto out_sig;
- if (offset > inode->i_sb->s_maxbytes)
- goto out_big;
- i_size_write(inode, offset);
- } else {
- struct address_space *mapping = inode->i_mapping;
-
- /*
- * truncation of in-use swapfiles is disallowed - it would
- * cause subsequent swapout to scribble on the now-freed
- * blocks.
- */
- if (IS_SWAPFILE(inode))
- return -ETXTBSY;
- i_size_write(inode, offset);
-
- /*
- * unmap_mapping_range is called twice, first simply for
- * efficiency so that truncate_inode_pages does fewer
- * single-page unmaps. However after this first call, and
- * before truncate_inode_pages finishes, it is possible for
- * private pages to be COWed, which remain after
- * truncate_inode_pages finishes, hence the second
- * unmap_mapping_range call must be made for correctness.
- */
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- truncate_inode_pages(mapping, offset);
- unmap_mapping_range(mapping, offset + PAGE_SIZE - 1, 0, 1);
- }
-
- if (inode->i_op->truncate)
- inode->i_op->truncate(inode);
- return 0;
-
-out_sig:
- send_sig(SIGXFSZ, current, 0);
-out_big:
- return -EFBIG;
-}
-EXPORT_SYMBOL(vmtruncate);
-
int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end)
{
struct address_space *mapping = inode->i_mapping;
goto out;
entry = pte_to_swp_entry(orig_pte);
- if (is_migration_entry(entry)) {
- migration_entry_wait(mm, pmd, address);
+ if (unlikely(non_swap_entry(entry))) {
+ if (is_migration_entry(entry)) {
+ migration_entry_wait(mm, pmd, address);
+ } else if (is_hwpoison_entry(entry)) {
+ ret = VM_FAULT_HWPOISON;
+ } else {
+ print_bad_pte(vma, address, orig_pte, NULL);
+ ret = VM_FAULT_OOM;
+ }
goto out;
}
delayacct_set_flag(DELAYACCT_PF_SWAPIN);
/* Had to read the page from swap area: Major fault */
ret = VM_FAULT_MAJOR;
count_vm_event(PGMAJFAULT);
+ } else if (PageHWPoison(page)) {
+ ret = VM_FAULT_HWPOISON;
+ delayacct_clear_flag(DELAYACCT_PF_SWAPIN);
+ goto out_release;
}
lock_page(page);
pte_unmap_unlock(page_table, ptl);
out_page:
unlock_page(page);
+out_release:
page_cache_release(page);
return ret;
}
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))
return ret;
+ if (unlikely(PageHWPoison(vmf.page))) {
+ if (ret & VM_FAULT_LOCKED)
+ unlock_page(vmf.page);
+ return VM_FAULT_HWPOISON;
+ }
+
/*
* For consistency in subsequent calls, make the faulted page always
* locked.
err = migrate_prep();
if (err)
- return err;
+ goto mpol_out;
}
{
NODEMASK_SCRATCH(scratch);
err = -ENOMEM;
NODEMASK_SCRATCH_FREE(scratch);
}
- if (err) {
- mpol_put(new);
- return err;
- }
+ if (err)
+ goto mpol_out;
+
vma = check_range(mm, start, end, nmask,
flags | MPOL_MF_INVERT, &pagelist);
if (!err && nr_failed && (flags & MPOL_MF_STRICT))
err = -EIO;
- }
+ } else
+ putback_lru_pages(&pagelist);
up_write(&mm->mmap_sem);
+ mpol_out:
mpol_put(new);
return err;
}
}
/* Establish migration ptes or remove ptes */
- try_to_unmap(page, 1);
+ try_to_unmap(page, TTU_MIGRATION|TTU_IGNORE_MLOCK|TTU_IGNORE_ACCESS);
skip_unmap:
if (!page_mapped(page))
{
}
-static struct vm_operations_struct special_mapping_vmops = {
+static const struct vm_operations_struct special_mapping_vmops = {
.close = special_mapping_close,
.fault = special_mapping_fault,
};
if (vma->vm_file) {
/*
* Subtle point from Rajesh Venkatasubramanian: before
- * moving file-based ptes, we must lock vmtruncate out,
- * since it might clean the dst vma before the src vma,
+ * moving file-based ptes, we must lock truncate_pagecache
+ * out, since it might clean the dst vma before the src vma,
* and we propagate stale pages into the dst afterward.
*/
mapping = vma->vm_file->f_mapping;
struct rb_root nommu_region_tree = RB_ROOT;
DECLARE_RWSEM(nommu_region_sem);
-struct vm_operations_struct generic_file_vm_ops = {
+const struct vm_operations_struct generic_file_vm_ops = {
};
-/*
- * Handle all mappings that got truncated by a "truncate()"
- * system call.
- *
- * NOTE! We have to be ready to update the memory sharing
- * between the file and the memory map for a potential last
- * incomplete page. Ugly, but necessary.
- */
-int vmtruncate(struct inode *inode, loff_t offset)
-{
- struct address_space *mapping = inode->i_mapping;
- unsigned long limit;
-
- if (inode->i_size < offset)
- goto do_expand;
- i_size_write(inode, offset);
-
- truncate_inode_pages(mapping, offset);
- goto out_truncate;
-
-do_expand:
- limit = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
- if (limit != RLIM_INFINITY && offset > limit)
- goto out_sig;
- if (offset > inode->i_sb->s_maxbytes)
- goto out;
- i_size_write(inode, offset);
-
-out_truncate:
- if (inode->i_op->truncate)
- inode->i_op->truncate(inode);
- return 0;
-out_sig:
- send_sig(SIGXFSZ, current, 0);
-out:
- return -EFBIG;
-}
-
-EXPORT_SYMBOL(vmtruncate);
-
/*
* Return the total memory allocated for this pointer, not
* just what the caller asked for.
int ret;
/* do the simple checks first */
- if (flags & MAP_FIXED || addr) {
+ if (flags & MAP_FIXED) {
printk(KERN_DEBUG
"%d: Can't do fixed-address/overlay mmap of RAM\n",
current->pid);
ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
if (ret == 0) {
vma->vm_region->vm_top = vma->vm_region->vm_end;
- return ret;
+ return 0;
}
if (ret != -ENOSYS)
return ret;
*/
static int do_mmap_private(struct vm_area_struct *vma,
struct vm_region *region,
- unsigned long len)
+ unsigned long len,
+ unsigned long capabilities)
{
struct page *pages;
unsigned long total, point, n, rlen;
* shared mappings on devices or memory
* - VM_MAYSHARE will be set if it may attempt to share
*/
- if (vma->vm_file) {
+ if (capabilities & BDI_CAP_MAP_DIRECT) {
ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
if (ret == 0) {
/* shouldn't return success if we're not sharing */
BUG_ON(!(vma->vm_flags & VM_MAYSHARE));
vma->vm_region->vm_top = vma->vm_region->vm_end;
- return ret;
+ return 0;
}
if (ret != -ENOSYS)
return ret;
kenter(",%lx,%lx,%lx,%lx,%lx", addr, len, prot, flags, pgoff);
- if (!(flags & MAP_FIXED))
- addr = round_hint_to_min(addr);
-
/* decide whether we should attempt the mapping, and if so what sort of
* mapping */
ret = validate_mmap_request(file, addr, len, prot, flags, pgoff,
return ret;
}
+ /* we ignore the address hint */
+ addr = 0;
+
/* we've determined that we can make the mapping, now translate what we
* now know into VMA flags */
vm_flags = determine_vm_flags(file, prot, flags, capabilities);
* - this is the hook for quasi-memory character devices to
* tell us the location of a shared mapping
*/
- if (file && file->f_op->get_unmapped_area) {
+ if (capabilities & BDI_CAP_MAP_DIRECT) {
addr = file->f_op->get_unmapped_area(file, addr, len,
pgoff, flags);
if (IS_ERR((void *) addr)) {
}
vma->vm_region = region;
- add_nommu_region(region);
- /* set up the mapping */
+ /* set up the mapping
+ * - the region is filled in if BDI_CAP_MAP_DIRECT is still set
+ */
if (file && vma->vm_flags & VM_SHARED)
ret = do_mmap_shared_file(vma);
else
- ret = do_mmap_private(vma, region, len);
+ ret = do_mmap_private(vma, region, len, capabilities);
if (ret < 0)
- goto error_put_region;
+ goto error_just_free;
+ add_nommu_region(region);
/* okay... we have a mapping; now we have to register it */
result = vma->vm_start;
kleave(" = %lx", result);
return result;
-error_put_region:
- __put_nommu_region(region);
- if (vma) {
- if (vma->vm_file) {
- fput(vma->vm_file);
- if (vma->vm_flags & VM_EXECUTABLE)
- removed_exe_file_vma(vma->vm_mm);
- }
- kmem_cache_free(vm_area_cachep, vma);
- }
- kleave(" = %d [pr]", ret);
- return ret;
-
error_just_free:
up_write(&nommu_region_sem);
error:
- fput(region->vm_file);
+ if (region->vm_file)
+ fput(region->vm_file);
kmem_cache_free(vm_region_jar, region);
- fput(vma->vm_file);
+ if (vma->vm_file)
+ fput(vma->vm_file);
if (vma->vm_flags & VM_EXECUTABLE)
removed_exe_file_vma(vma->vm_mm);
kmem_cache_free(vm_area_cachep, vma);
/*
* When balance_dirty_pages decides that the caller needs to perform some
* non-background writeback, this is how many pages it will attempt to write.
- * It should be somewhat larger than RATELIMIT_PAGES to ensure that reasonably
+ * It should be somewhat larger than dirtied pages to ensure that reasonably
* large amounts of I/O are submitted.
*/
-static inline long sync_writeback_pages(void)
+static inline long sync_writeback_pages(unsigned long dirtied)
{
- return ratelimit_pages + ratelimit_pages / 2;
+ if (dirtied < ratelimit_pages)
+ dirtied = ratelimit_pages;
+
+ return dirtied + dirtied / 2;
}
/* The following parameters are exported via /proc/sys/vm */
/*
- * Start background writeback (via pdflush) at this percentage
+ * Start background writeback (via writeback threads) at this percentage
*/
int dirty_background_ratio = 10;
}
int dirty_background_ratio_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
- ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write)
dirty_background_bytes = 0;
return ret;
}
int dirty_background_bytes_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
- ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write)
dirty_background_ratio = 0;
return ret;
}
int dirty_ratio_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int old_ratio = vm_dirty_ratio;
int ret;
- ret = proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write && vm_dirty_ratio != old_ratio) {
update_completion_period();
vm_dirty_bytes = 0;
int dirty_bytes_handler(struct ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
unsigned long old_bytes = vm_dirty_bytes;
int ret;
- ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
if (ret == 0 && write && vm_dirty_bytes != old_bytes) {
update_completion_period();
vm_dirty_ratio = 0;
* balance_dirty_pages() must be called by processes which are generating dirty
* data. It looks at the number of dirty pages in the machine and will force
* the caller to perform writeback if the system is over `vm_dirty_ratio'.
- * If we're over `background_thresh' then pdflush is woken to perform some
- * writeout.
+ * If we're over `background_thresh' then the writeback threads are woken to
+ * perform some writeout.
*/
-static void balance_dirty_pages(struct address_space *mapping)
+static void balance_dirty_pages(struct address_space *mapping,
+ unsigned long write_chunk)
{
long nr_reclaimable, bdi_nr_reclaimable;
long nr_writeback, bdi_nr_writeback;
unsigned long dirty_thresh;
unsigned long bdi_thresh;
unsigned long pages_written = 0;
- unsigned long write_chunk = sync_writeback_pages();
unsigned long pause = 1;
struct backing_dev_info *bdi = mapping->backing_dev_info;
if (pages_written >= write_chunk)
break; /* We've done our duty */
- schedule_timeout_interruptible(pause);
+ __set_current_state(TASK_INTERRUPTIBLE);
+ io_schedule_timeout(pause);
/*
* Increase the delay for each loop, up to our previous
bdi->dirty_exceeded = 0;
if (writeback_in_progress(bdi))
- return; /* pdflush is already working this queue */
+ return;
/*
* In laptop mode, we wait until hitting the higher threshold before
* background_thresh, to keep the amount of dirty memory low.
*/
if ((laptop_mode && pages_written) ||
- (!laptop_mode && ((nr_writeback = global_page_state(NR_FILE_DIRTY)
- + global_page_state(NR_UNSTABLE_NFS))
+ (!laptop_mode && ((global_page_state(NR_FILE_DIRTY)
+ + global_page_state(NR_UNSTABLE_NFS))
> background_thresh)))
- bdi_start_writeback(bdi, nr_writeback);
+ bdi_start_writeback(bdi, NULL, 0);
}
void set_page_dirty_balance(struct page *page, int page_mkwrite)
p = &__get_cpu_var(bdp_ratelimits);
*p += nr_pages_dirtied;
if (unlikely(*p >= ratelimit)) {
+ ratelimit = sync_writeback_pages(*p);
*p = 0;
preempt_enable();
- balance_dirty_pages(mapping);
+ balance_dirty_pages(mapping, ratelimit);
return;
}
preempt_enable();
* sysctl handler for /proc/sys/vm/dirty_writeback_centisecs
*/
int dirty_writeback_centisecs_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
- proc_dointvec(table, write, file, buffer, length, ppos);
+ proc_dointvec(table, write, buffer, length, ppos);
return 0;
}
EXPORT_SYMBOL(redirty_page_for_writepage);
/*
+ * Dirty a page.
+ *
+ * For pages with a mapping this should be done under the page lock
+ * for the benefit of asynchronous memory errors who prefer a consistent
+ * dirty state. This rule can be broken in some special cases,
+ * but should be better not to.
+ *
* If the mapping doesn't provide a set_page_dirty a_op, then
* just fall through and assume that it wants buffer_heads.
*/
static unsigned long nr_shown;
static unsigned long nr_unshown;
+ /* Don't complain about poisoned pages */
+ if (PageHWPoison(page)) {
+ __ClearPageBuddy(page);
+ return;
+ }
+
/*
* Allow a burst of 60 reports, then keep quiet for that minute;
* or allow a steady drip of one report per second.
/*
* This page is about to be returned from the page allocator
*/
-static int prep_new_page(struct page *page, int order, gfp_t gfp_flags)
+static inline int check_new_page(struct page *page)
{
if (unlikely(page_mapcount(page) |
(page->mapping != NULL) |
bad_page(page);
return 1;
}
+ return 0;
+}
+
+static int prep_new_page(struct page *page, int order, gfp_t gfp_flags)
+{
+ int i;
+
+ for (i = 0; i < (1 << order); i++) {
+ struct page *p = page + i;
+ if (unlikely(check_new_page(p)))
+ return 1;
+ }
set_page_private(page, 0);
set_page_refcounted(page);
printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n"
" active_file:%lu inactive_file:%lu isolated_file:%lu\n"
" unevictable:%lu"
- " dirty:%lu writeback:%lu unstable:%lu buffer:%lu\n"
+ " dirty:%lu writeback:%lu unstable:%lu\n"
" free:%lu slab_reclaimable:%lu slab_unreclaimable:%lu\n"
" mapped:%lu shmem:%lu pagetables:%lu bounce:%lu\n",
global_page_state(NR_ACTIVE_ANON),
global_page_state(NR_FILE_DIRTY),
global_page_state(NR_WRITEBACK),
global_page_state(NR_UNSTABLE_NFS),
- nr_blockdev_pages(),
global_page_state(NR_FREE_PAGES),
global_page_state(NR_SLAB_RECLAIMABLE),
global_page_state(NR_SLAB_UNRECLAIMABLE),
* sysctl handler for numa_zonelist_order
*/
int numa_zonelist_order_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length,
+ void __user *buffer, size_t *length,
loff_t *ppos)
{
char saved_string[NUMA_ZONELIST_ORDER_LEN];
if (write)
strncpy(saved_string, (char*)table->data,
NUMA_ZONELIST_ORDER_LEN);
- ret = proc_dostring(table, write, file, buffer, length, ppos);
+ ret = proc_dostring(table, write, buffer, length, ppos);
if (ret)
return ret;
if (write) {
* changes.
*/
int min_free_kbytes_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
- proc_dointvec(table, write, file, buffer, length, ppos);
+ proc_dointvec(table, write, buffer, length, ppos);
if (write)
setup_per_zone_wmarks();
return 0;
#ifdef CONFIG_NUMA
int sysctl_min_unmapped_ratio_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
struct zone *zone;
int rc;
- rc = proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ rc = proc_dointvec_minmax(table, write, buffer, length, ppos);
if (rc)
return rc;
}
int sysctl_min_slab_ratio_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
struct zone *zone;
int rc;
- rc = proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ rc = proc_dointvec_minmax(table, write, buffer, length, ppos);
if (rc)
return rc;
* if in function of the boot time zone sizes.
*/
int lowmem_reserve_ratio_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
- proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ proc_dointvec_minmax(table, write, buffer, length, ppos);
setup_per_zone_lowmem_reserve();
return 0;
}
*/
int percpu_pagelist_fraction_sysctl_handler(ctl_table *table, int write,
- struct file *file, void __user *buffer, size_t *length, loff_t *ppos)
+ void __user *buffer, size_t *length, loff_t *ppos)
{
struct zone *zone;
unsigned int cpu;
int ret;
- ret = proc_dointvec_minmax(table, write, file, buffer, length, ppos);
+ ret = proc_dointvec_minmax(table, write, buffer, length, ppos);
if (!write || (ret == -EINVAL))
return ret;
for_each_populated_zone(zone) {
*
* During allocation, pcpu_alloc_mutex is kept locked all the time and
* pcpu_lock is grabbed and released as necessary. All actual memory
- * allocations are done using GFP_KERNEL with pcpu_lock released.
+ * allocations are done using GFP_KERNEL with pcpu_lock released. In
+ * general, percpu memory can't be allocated with irq off but
+ * irqsave/restore are still used in alloc path so that it can be used
+ * from early init path - sched_init() specifically.
*
* Free path accesses and alters only the index data structures, so it
* can be safely called from atomic context. When memory needs to be
* RETURNS:
* 0 if noop, 1 if successfully extended, -errno on failure.
*/
-static int pcpu_extend_area_map(struct pcpu_chunk *chunk)
+static int pcpu_extend_area_map(struct pcpu_chunk *chunk, unsigned long *flags)
{
int new_alloc;
int *new;
if (chunk->map_alloc >= chunk->map_used + 2)
return 0;
- spin_unlock_irq(&pcpu_lock);
+ spin_unlock_irqrestore(&pcpu_lock, *flags);
new_alloc = PCPU_DFL_MAP_ALLOC;
while (new_alloc < chunk->map_used + 2)
new = pcpu_mem_alloc(new_alloc * sizeof(new[0]));
if (!new) {
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, *flags);
return -ENOMEM;
}
* could have happened inbetween, so map_used couldn't have
* grown.
*/
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, *flags);
BUG_ON(new_alloc < chunk->map_used + 2);
size = chunk->map_alloc * sizeof(chunk->map[0]);
*/
static void *pcpu_alloc(size_t size, size_t align, bool reserved)
{
+ static int warn_limit = 10;
struct pcpu_chunk *chunk;
+ const char *err;
int slot, off;
+ unsigned long flags;
if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) {
WARN(true, "illegal size (%zu) or align (%zu) for "
}
mutex_lock(&pcpu_alloc_mutex);
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, flags);
/* serve reserved allocations from the reserved chunk if available */
if (reserved && pcpu_reserved_chunk) {
chunk = pcpu_reserved_chunk;
if (size > chunk->contig_hint ||
- pcpu_extend_area_map(chunk) < 0)
+ pcpu_extend_area_map(chunk, &flags) < 0) {
+ err = "failed to extend area map of reserved chunk";
goto fail_unlock;
+ }
off = pcpu_alloc_area(chunk, size, align);
if (off >= 0)
goto area_found;
+ err = "alloc from reserved chunk failed";
goto fail_unlock;
}
if (size > chunk->contig_hint)
continue;
- switch (pcpu_extend_area_map(chunk)) {
+ switch (pcpu_extend_area_map(chunk, &flags)) {
case 0:
break;
case 1:
goto restart; /* pcpu_lock dropped, restart */
default:
+ err = "failed to extend area map";
goto fail_unlock;
}
}
/* hmmm... no space left, create a new chunk */
- spin_unlock_irq(&pcpu_lock);
+ spin_unlock_irqrestore(&pcpu_lock, flags);
chunk = alloc_pcpu_chunk();
- if (!chunk)
+ if (!chunk) {
+ err = "failed to allocate new chunk";
goto fail_unlock_mutex;
+ }
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, flags);
pcpu_chunk_relocate(chunk, -1);
goto restart;
area_found:
- spin_unlock_irq(&pcpu_lock);
+ spin_unlock_irqrestore(&pcpu_lock, flags);
/* populate, map and clear the area */
if (pcpu_populate_chunk(chunk, off, size)) {
- spin_lock_irq(&pcpu_lock);
+ spin_lock_irqsave(&pcpu_lock, flags);
pcpu_free_area(chunk, off);
+ err = "failed to populate";
goto fail_unlock;
}
return __addr_to_pcpu_ptr(chunk->base_addr + off);
fail_unlock:
- spin_unlock_irq(&pcpu_lock);
+ spin_unlock_irqrestore(&pcpu_lock, flags);
fail_unlock_mutex:
mutex_unlock(&pcpu_alloc_mutex);
+ if (warn_limit) {
+ pr_warning("PERCPU: allocation failed, size=%zu align=%zu, "
+ "%s\n", size, align, err);
+ dump_stack();
+ if (!--warn_limit)
+ pr_info("PERCPU: limit reached, disable warning\n");
+ }
return NULL;
}
struct pcpu_alloc_info *ai;
unsigned int *cpu_map;
+ /* this function may be called multiple times */
+ memset(group_map, 0, sizeof(group_map));
+ memset(group_cnt, 0, sizeof(group_map));
+
/*
* Determine min_unit_size, alloc_size and max_upa such that
* alloc_size is multiple of atom_size and is the smallest
int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
void *base_addr)
{
+ static char cpus_buf[4096] __initdata;
static int smap[2], dmap[2];
size_t dyn_size = ai->dyn_size;
size_t size_sum = ai->static_size + ai->reserved_size + dyn_size;
int *unit_map;
int group, unit, i;
+ cpumask_scnprintf(cpus_buf, sizeof(cpus_buf), cpu_possible_mask);
+
+#define PCPU_SETUP_BUG_ON(cond) do { \
+ if (unlikely(cond)) { \
+ pr_emerg("PERCPU: failed to initialize, %s", #cond); \
+ pr_emerg("PERCPU: cpu_possible_mask=%s\n", cpus_buf); \
+ pcpu_dump_alloc_info(KERN_EMERG, ai); \
+ BUG(); \
+ } \
+} while (0)
+
/* sanity checks */
BUILD_BUG_ON(ARRAY_SIZE(smap) >= PCPU_DFL_MAP_ALLOC ||
ARRAY_SIZE(dmap) >= PCPU_DFL_MAP_ALLOC);
- BUG_ON(ai->nr_groups <= 0);
- BUG_ON(!ai->static_size);
- BUG_ON(!base_addr);
- BUG_ON(ai->unit_size < size_sum);
- BUG_ON(ai->unit_size & ~PAGE_MASK);
- BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE);
-
- pcpu_dump_alloc_info(KERN_DEBUG, ai);
+ PCPU_SETUP_BUG_ON(ai->nr_groups <= 0);
+ PCPU_SETUP_BUG_ON(!ai->static_size);
+ PCPU_SETUP_BUG_ON(!base_addr);
+ PCPU_SETUP_BUG_ON(ai->unit_size < size_sum);
+ PCPU_SETUP_BUG_ON(ai->unit_size & ~PAGE_MASK);
+ PCPU_SETUP_BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE);
/* process group information and build config tables accordingly */
group_offsets = alloc_bootmem(ai->nr_groups * sizeof(group_offsets[0]));
unit_off = alloc_bootmem(nr_cpu_ids * sizeof(unit_off[0]));
for (cpu = 0; cpu < nr_cpu_ids; cpu++)
- unit_map[cpu] = NR_CPUS;
+ unit_map[cpu] = UINT_MAX;
pcpu_first_unit_cpu = NR_CPUS;
for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) {
if (cpu == NR_CPUS)
continue;
- BUG_ON(cpu > nr_cpu_ids || !cpu_possible(cpu));
- BUG_ON(unit_map[cpu] != NR_CPUS);
+ PCPU_SETUP_BUG_ON(cpu > nr_cpu_ids);
+ PCPU_SETUP_BUG_ON(!cpu_possible(cpu));
+ PCPU_SETUP_BUG_ON(unit_map[cpu] != UINT_MAX);
unit_map[cpu] = unit + i;
unit_off[cpu] = gi->base_offset + i * ai->unit_size;
pcpu_nr_units = unit;
for_each_possible_cpu(cpu)
- BUG_ON(unit_map[cpu] == NR_CPUS);
+ PCPU_SETUP_BUG_ON(unit_map[cpu] == UINT_MAX);
+
+ /* we're done parsing the input, undefine BUG macro and dump config */
+#undef PCPU_SETUP_BUG_ON
+ pcpu_dump_alloc_info(KERN_INFO, ai);
pcpu_nr_groups = ai->nr_groups;
pcpu_group_offsets = group_offsets;
void *base = (void *)ULONG_MAX;
void **areas = NULL;
struct pcpu_alloc_info *ai;
- size_t size_sum, areas_size;
+ size_t size_sum, areas_size, max_distance;
int group, i, rc;
ai = pcpu_build_alloc_info(reserved_size, dyn_size, atom_size,
}
/* base address is now known, determine group base offsets */
- for (group = 0; group < ai->nr_groups; group++)
+ max_distance = 0;
+ for (group = 0; group < ai->nr_groups; group++) {
ai->groups[group].base_offset = areas[group] - base;
+ max_distance = max_t(size_t, max_distance,
+ ai->groups[group].base_offset);
+ }
+ max_distance += ai->unit_size;
+
+ /* warn if maximum distance is further than 75% of vmalloc space */
+ if (max_distance > (VMALLOC_END - VMALLOC_START) * 3 / 4) {
+ pr_warning("PERCPU: max_distance=0x%zx too large for vmalloc "
+ "space 0x%lx\n",
+ max_distance, VMALLOC_END - VMALLOC_START);
+#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK
+ /* and fail if we have fallback */
+ rc = -EINVAL;
+ goto out_free;
+#endif
+ }
pr_info("PERCPU: Embedded %zu pages/cpu @%p s%zu r%zu d%zu u%zu\n",
PFN_DOWN(size_sum), base, ai->static_size, ai->reserved_size,
int node = numa_node_id();
struct zone *zones = NODE_DATA(node)->node_zones;
int num_cpus_on_node;
- const struct cpumask *cpumask_on_node = cpumask_of_node(node);
node_free_pages =
#ifdef CONFIG_ZONE_DMA
max = node_free_pages / FRACTION_OF_NODE_MEM;
- num_cpus_on_node = cpus_weight_nr(*cpumask_on_node);
+ num_cpus_on_node = cpumask_weight(cpumask_of_node(node));
max /= num_cpus_on_node;
return max(max, min_pages);
* mapping->tree_lock (widely used, in set_page_dirty,
* in arch-dependent flush_dcache_mmap_lock,
* within inode_lock in __sync_single_inode)
+ *
+ * (code doesn't rely on that order so it could be switched around)
+ * ->tasklist_lock
+ * anon_vma->lock (memory_failure, collect_procs_anon)
+ * pte map lock
*/
#include <linux/mm.h>
* Getting a lock on a stable anon_vma from a page off the LRU is
* tricky: page_lock_anon_vma rely on RCU to guard against the races.
*/
-static struct anon_vma *page_lock_anon_vma(struct page *page)
+struct anon_vma *page_lock_anon_vma(struct page *page)
{
struct anon_vma *anon_vma;
unsigned long anon_mapping;
return NULL;
}
-static void page_unlock_anon_vma(struct anon_vma *anon_vma)
+void page_unlock_anon_vma(struct anon_vma *anon_vma)
{
spin_unlock(&anon_vma->lock);
rcu_read_unlock();
}
/*
- * At what user virtual address is page expected in vma? checking that the
- * page matches the vma: currently only used on anon pages, by unuse_vma;
+ * At what user virtual address is page expected in vma?
+ * checking that the page matches the vma.
*/
unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
{
* if the page is not mapped into the page tables of this VMA. Only
* valid for normal file or anonymous VMAs.
*/
-static int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma)
+int page_mapped_in_vma(struct page *page, struct vm_area_struct *vma)
{
unsigned long address;
pte_t *pte;
* repeatedly from either try_to_unmap_anon or try_to_unmap_file.
*/
static int try_to_unmap_one(struct page *page, struct vm_area_struct *vma,
- int migration)
+ enum ttu_flags flags)
{
struct mm_struct *mm = vma->vm_mm;
unsigned long address;
* If it's recently referenced (perhaps page_referenced
* skipped over this mm) then we should reactivate it.
*/
- if (!migration) {
+ if (!(flags & TTU_IGNORE_MLOCK)) {
if (vma->vm_flags & VM_LOCKED) {
ret = SWAP_MLOCK;
goto out_unmap;
}
+ }
+ if (!(flags & TTU_IGNORE_ACCESS)) {
if (ptep_clear_flush_young_notify(vma, address, pte)) {
ret = SWAP_FAIL;
goto out_unmap;
/* Update high watermark before we lower rss */
update_hiwater_rss(mm);
- if (PageAnon(page)) {
+ if (PageHWPoison(page) && !(flags & TTU_IGNORE_HWPOISON)) {
+ if (PageAnon(page))
+ dec_mm_counter(mm, anon_rss);
+ else
+ dec_mm_counter(mm, file_rss);
+ set_pte_at(mm, address, pte,
+ swp_entry_to_pte(make_hwpoison_entry(page)));
+ } else if (PageAnon(page)) {
swp_entry_t entry = { .val = page_private(page) };
if (PageSwapCache(page)) {
* pte. do_swap_page() will wait until the migration
* pte is removed and then restart fault handling.
*/
- BUG_ON(!migration);
+ BUG_ON(TTU_ACTION(flags) != TTU_MIGRATION);
entry = make_migration_entry(page, pte_write(pteval));
}
set_pte_at(mm, address, pte, swp_entry_to_pte(entry));
BUG_ON(pte_file(*pte));
- } else if (PAGE_MIGRATION && migration) {
+ } else if (PAGE_MIGRATION && (TTU_ACTION(flags) == TTU_MIGRATION)) {
/* Establish migration entry for a file page */
swp_entry_t entry;
entry = make_migration_entry(page, pte_write(pteval));
* vm_flags for that VMA. That should be OK, because that vma shouldn't be
* 'LOCKED.
*/
-static int try_to_unmap_anon(struct page *page, int unlock, int migration)
+static int try_to_unmap_anon(struct page *page, enum ttu_flags flags)
{
struct anon_vma *anon_vma;
struct vm_area_struct *vma;
unsigned int mlocked = 0;
int ret = SWAP_AGAIN;
+ int unlock = TTU_ACTION(flags) == TTU_MUNLOCK;
if (MLOCK_PAGES && unlikely(unlock))
ret = SWAP_SUCCESS; /* default for try_to_munlock() */
continue; /* must visit all unlocked vmas */
ret = SWAP_MLOCK; /* saw at least one mlocked vma */
} else {
- ret = try_to_unmap_one(page, vma, migration);
+ ret = try_to_unmap_one(page, vma, flags);
if (ret == SWAP_FAIL || !page_mapped(page))
break;
}
/**
* try_to_unmap_file - unmap/unlock file page using the object-based rmap method
* @page: the page to unmap/unlock
- * @unlock: request for unlock rather than unmap [unlikely]
- * @migration: unmapping for migration - ignored if @unlock
+ * @flags: action and flags
*
* Find all the mappings of a page using the mapping pointer and the vma chains
* contained in the address_space struct it points to.
* vm_flags for that VMA. That should be OK, because that vma shouldn't be
* 'LOCKED.
*/
-static int try_to_unmap_file(struct page *page, int unlock, int migration)
+static int try_to_unmap_file(struct page *page, enum ttu_flags flags)
{
struct address_space *mapping = page->mapping;
pgoff_t pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
unsigned long max_nl_size = 0;
unsigned int mapcount;
unsigned int mlocked = 0;
+ int unlock = TTU_ACTION(flags) == TTU_MUNLOCK;
if (MLOCK_PAGES && unlikely(unlock))
ret = SWAP_SUCCESS; /* default for try_to_munlock() */
continue; /* must visit all vmas */
ret = SWAP_MLOCK;
} else {
- ret = try_to_unmap_one(page, vma, migration);
+ ret = try_to_unmap_one(page, vma, flags);
if (ret == SWAP_FAIL || !page_mapped(page))
goto out;
}
ret = SWAP_MLOCK; /* leave mlocked == 0 */
goto out; /* no need to look further */
}
- if (!MLOCK_PAGES && !migration && (vma->vm_flags & VM_LOCKED))
+ if (!MLOCK_PAGES && !(flags & TTU_IGNORE_MLOCK) &&
+ (vma->vm_flags & VM_LOCKED))
continue;
cursor = (unsigned long) vma->vm_private_data;
if (cursor > max_nl_cursor)
do {
list_for_each_entry(vma, &mapping->i_mmap_nonlinear,
shared.vm_set.list) {
- if (!MLOCK_PAGES && !migration &&
+ if (!MLOCK_PAGES && !(flags & TTU_IGNORE_MLOCK) &&
(vma->vm_flags & VM_LOCKED))
continue;
cursor = (unsigned long) vma->vm_private_data;
/**
* try_to_unmap - try to remove all page table mappings to a page
* @page: the page to get unmapped
- * @migration: migration flag
+ * @flags: action and flags
*
* Tries to remove all the page table entries which are mapping this
* page, used in the pageout path. Caller must hold the page lock.
* SWAP_FAIL - the page is unswappable
* SWAP_MLOCK - page is mlocked.
*/
-int try_to_unmap(struct page *page, int migration)
+int try_to_unmap(struct page *page, enum ttu_flags flags)
{
int ret;
BUG_ON(!PageLocked(page));
if (PageAnon(page))
- ret = try_to_unmap_anon(page, 0, migration);
+ ret = try_to_unmap_anon(page, flags);
else
- ret = try_to_unmap_file(page, 0, migration);
+ ret = try_to_unmap_file(page, flags);
if (ret != SWAP_MLOCK && !page_mapped(page))
ret = SWAP_SUCCESS;
return ret;
VM_BUG_ON(!PageLocked(page) || PageLRU(page));
if (PageAnon(page))
- return try_to_unmap_anon(page, 1, 0);
+ return try_to_unmap_anon(page, TTU_MUNLOCK);
else
- return try_to_unmap_file(page, 1, 0);
+ return try_to_unmap_file(page, TTU_MUNLOCK);
}
static const struct inode_operations shmem_inode_operations;
static const struct inode_operations shmem_dir_inode_operations;
static const struct inode_operations shmem_special_inode_operations;
-static struct vm_operations_struct shmem_vm_ops;
+static const struct vm_operations_struct shmem_vm_ops;
static struct backing_dev_info shmem_backing_dev_info __read_mostly = {
.ra_pages = 0, /* No readahead */
* sync from ever calling shmem_writepage; but a stacking filesystem
* may use the ->writepage of its underlying filesystem, in which case
* tmpfs should write out to swap only in response to memory pressure,
- * and not for pdflush or sync. However, in those cases, we do still
- * want to check if there's a redundant swappage to be discarded.
+ * and not for the writeback threads or sync. However, in those cases,
+ * we do still want to check if there's a redundant swappage to be
+ * discarded.
*/
if (wbc->for_reclaim)
swap = get_swap_page();
if (pos + copied > inode->i_size)
i_size_write(inode, pos + copied);
- unlock_page(page);
set_page_dirty(page);
+ unlock_page(page);
page_cache_release(page);
return copied;
iput(inode);
return error;
}
- unlock_page(page);
inode->i_mapping->a_ops = &shmem_aops;
inode->i_op = &shmem_symlink_inode_operations;
kaddr = kmap_atomic(page, KM_USER0);
memcpy(kaddr, symname, len);
kunmap_atomic(kaddr, KM_USER0);
set_page_dirty(page);
+ unlock_page(page);
page_cache_release(page);
}
if (dir->i_mode & S_ISGID)
.write_end = shmem_write_end,
#endif
.migratepage = migrate_page,
+ .error_remove_page = generic_error_remove_page,
};
static const struct file_operations shmem_file_operations = {
.put_super = shmem_put_super,
};
-static struct vm_operations_struct shmem_vm_ops = {
+static const struct vm_operations_struct shmem_vm_ops = {
.fault = shmem_fault,
#ifdef CONFIG_NUMA
.set_policy = shmem_set_policy,
struct swap_info_struct *p;
struct page *page = NULL;
- if (is_migration_entry(entry))
+ if (non_swap_entry(entry))
return 1;
p = swap_info_get(entry);
} else
retval = unuse_mm(mm, entry, page);
- if (set_start_mm &&
- swap_count(*swap_map) < swcount) {
+ if (set_start_mm && *swap_map < swcount) {
mmput(new_start_mm);
atomic_inc(&mm->mm_users);
new_start_mm = mm;
goto bad_swap;
}
- if (blk_queue_nonrot(bdev_get_queue(p->bdev))) {
- p->flags |= SWP_SOLIDSTATE;
- p->cluster_next = 1 + (random32() % p->highest_bit);
+ if (p->bdev) {
+ if (blk_queue_nonrot(bdev_get_queue(p->bdev))) {
+ p->flags |= SWP_SOLIDSTATE;
+ p->cluster_next = 1 + (random32() % p->highest_bit);
+ }
+ if (discard_swap(p) == 0)
+ p->flags |= SWP_DISCARDABLE;
}
- if (discard_swap(p) == 0)
- p->flags |= SWP_DISCARDABLE;
mutex_lock(&swapon_mutex);
spin_lock(&swap_lock);
int count;
bool has_cache;
- if (is_migration_entry(entry))
+ if (non_swap_entry(entry))
return -EINVAL;
type = swp_type(entry);
* its lock, b) when a concurrent invalidate_mapping_pages got there first and
* c) when tmpfs swizzles a page between a tmpfs inode and swapper_space.
*/
-static void
+static int
truncate_complete_page(struct address_space *mapping, struct page *page)
{
if (page->mapping != mapping)
- return;
+ return -EIO;
if (page_has_private(page))
do_invalidatepage(page, 0);
remove_from_page_cache(page);
ClearPageMappedToDisk(page);
page_cache_release(page); /* pagecache ref */
+ return 0;
}
/*
return ret;
}
+int truncate_inode_page(struct address_space *mapping, struct page *page)
+{
+ if (page_mapped(page)) {
+ unmap_mapping_range(mapping,
+ (loff_t)page->index << PAGE_CACHE_SHIFT,
+ PAGE_CACHE_SIZE, 0);
+ }
+ return truncate_complete_page(mapping, page);
+}
+
+/*
+ * Used to get rid of pages on hardware memory corruption.
+ */
+int generic_error_remove_page(struct address_space *mapping, struct page *page)
+{
+ if (!mapping)
+ return -EINVAL;
+ /*
+ * Only punch for normal data pages for now.
+ * Handling other types like directories would need more auditing.
+ */
+ if (!S_ISREG(mapping->host->i_mode))
+ return -EIO;
+ return truncate_inode_page(mapping, page);
+}
+EXPORT_SYMBOL(generic_error_remove_page);
+
+/*
+ * Safely invalidate one page from its pagecache mapping.
+ * It only drops clean, unused pages. The page must be locked.
+ *
+ * Returns 1 if the page is successfully invalidated, otherwise 0.
+ */
+int invalidate_inode_page(struct page *page)
+{
+ struct address_space *mapping = page_mapping(page);
+ if (!mapping)
+ return 0;
+ if (PageDirty(page) || PageWriteback(page))
+ return 0;
+ if (page_mapped(page))
+ return 0;
+ return invalidate_complete_page(mapping, page);
+}
+
/**
* truncate_inode_pages - truncate range of pages specified by start & end byte offsets
* @mapping: mapping to truncate
unlock_page(page);
continue;
}
- if (page_mapped(page)) {
- unmap_mapping_range(mapping,
- (loff_t)page_index<<PAGE_CACHE_SHIFT,
- PAGE_CACHE_SIZE, 0);
- }
- truncate_complete_page(mapping, page);
+ truncate_inode_page(mapping, page);
unlock_page(page);
}
pagevec_release(&pvec);
break;
lock_page(page);
wait_on_page_writeback(page);
- if (page_mapped(page)) {
- unmap_mapping_range(mapping,
- (loff_t)page->index<<PAGE_CACHE_SHIFT,
- PAGE_CACHE_SIZE, 0);
- }
+ truncate_inode_page(mapping, page);
if (page->index > next)
next = page->index;
next++;
- truncate_complete_page(mapping, page);
unlock_page(page);
}
pagevec_release(&pvec);
if (lock_failed)
continue;
- if (PageDirty(page) || PageWriteback(page))
- goto unlock;
- if (page_mapped(page))
- goto unlock;
- ret += invalidate_complete_page(mapping, page);
-unlock:
+ ret += invalidate_inode_page(page);
+
unlock_page(page);
if (next > end)
break;
return invalidate_inode_pages2_range(mapping, 0, -1);
}
EXPORT_SYMBOL_GPL(invalidate_inode_pages2);
+
+/**
+ * truncate_pagecache - unmap and remove pagecache that has been truncated
+ * @inode: inode
+ * @old: old file offset
+ * @new: new file offset
+ *
+ * inode's new i_size must already be written before truncate_pagecache
+ * is called.
+ *
+ * This function should typically be called before the filesystem
+ * releases resources associated with the freed range (eg. deallocates
+ * blocks). This way, pagecache will always stay logically coherent
+ * with on-disk format, and the filesystem would not have to deal with
+ * situations such as writepage being called for a page that has already
+ * had its underlying blocks deallocated.
+ */
+void truncate_pagecache(struct inode *inode, loff_t old, loff_t new)
+{
+ if (new < old) {
+ struct address_space *mapping = inode->i_mapping;
+
+ /*
+ * unmap_mapping_range is called twice, first simply for
+ * efficiency so that truncate_inode_pages does fewer
+ * single-page unmaps. However after this first call, and
+ * before truncate_inode_pages finishes, it is possible for
+ * private pages to be COWed, which remain after
+ * truncate_inode_pages finishes, hence the second
+ * unmap_mapping_range call must be made for correctness.
+ */
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
+ truncate_inode_pages(mapping, new);
+ unmap_mapping_range(mapping, new + PAGE_SIZE - 1, 0, 1);
+ }
+}
+EXPORT_SYMBOL(truncate_pagecache);
+
+/**
+ * vmtruncate - unmap mappings "freed" by truncate() syscall
+ * @inode: inode of the file used
+ * @offset: file offset to start truncating
+ *
+ * NOTE! We have to be ready to update the memory sharing
+ * between the file and the memory map for a potential last
+ * incomplete page. Ugly, but necessary.
+ */
+int vmtruncate(struct inode *inode, loff_t offset)
+{
+ loff_t oldsize;
+ int error;
+
+ error = inode_newsize_ok(inode, offset);
+ if (error)
+ return error;
+ oldsize = inode->i_size;
+ i_size_write(inode, offset);
+ truncate_pagecache(inode, oldsize, offset);
+ if (inode->i_op->truncate)
+ inode->i_op->truncate(inode);
+
+ return error;
+}
+EXPORT_SYMBOL(vmtruncate);
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/highmem.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/rcupdate.h>
#include <linux/pfn.h>
#include <linux/kmemleak.h>
-#include <linux/highmem.h>
#include <asm/atomic.h>
#include <asm/uaccess.h>
#include <asm/tlbflush.h>
+#include <asm/shmparam.h>
/*** Page table manipulation functions ***/
}
static struct vm_struct *__get_vm_area_node(unsigned long size,
- unsigned long flags, unsigned long start, unsigned long end,
- int node, gfp_t gfp_mask, void *caller)
+ unsigned long align, unsigned long flags, unsigned long start,
+ unsigned long end, int node, gfp_t gfp_mask, void *caller)
{
static struct vmap_area *va;
struct vm_struct *area;
- unsigned long align = 1;
BUG_ON(in_interrupt());
if (flags & VM_IOREMAP) {
struct vm_struct *__get_vm_area(unsigned long size, unsigned long flags,
unsigned long start, unsigned long end)
{
- return __get_vm_area_node(size, flags, start, end, -1, GFP_KERNEL,
+ return __get_vm_area_node(size, 1, flags, start, end, -1, GFP_KERNEL,
__builtin_return_address(0));
}
EXPORT_SYMBOL_GPL(__get_vm_area);
unsigned long start, unsigned long end,
void *caller)
{
- return __get_vm_area_node(size, flags, start, end, -1, GFP_KERNEL,
+ return __get_vm_area_node(size, 1, flags, start, end, -1, GFP_KERNEL,
caller);
}
*/
struct vm_struct *get_vm_area(unsigned long size, unsigned long flags)
{
- return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END,
+ return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
-1, GFP_KERNEL, __builtin_return_address(0));
}
struct vm_struct *get_vm_area_caller(unsigned long size, unsigned long flags,
void *caller)
{
- return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END,
+ return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
-1, GFP_KERNEL, caller);
}
struct vm_struct *get_vm_area_node(unsigned long size, unsigned long flags,
int node, gfp_t gfp_mask)
{
- return __get_vm_area_node(size, flags, VMALLOC_START, VMALLOC_END, node,
- gfp_mask, __builtin_return_address(0));
+ return __get_vm_area_node(size, 1, flags, VMALLOC_START, VMALLOC_END,
+ node, gfp_mask, __builtin_return_address(0));
}
static struct vm_struct *find_vm_area(const void *addr)
}
EXPORT_SYMBOL(vmap);
-static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
+static void *__vmalloc_node(unsigned long size, unsigned long align,
+ gfp_t gfp_mask, pgprot_t prot,
int node, void *caller);
static void *__vmalloc_area_node(struct vm_struct *area, gfp_t gfp_mask,
pgprot_t prot, int node, void *caller)
area->nr_pages = nr_pages;
/* Please note that the recursion is strictly bounded. */
if (array_size > PAGE_SIZE) {
- pages = __vmalloc_node(array_size, gfp_mask | __GFP_ZERO,
+ pages = __vmalloc_node(array_size, 1, gfp_mask | __GFP_ZERO,
PAGE_KERNEL, node, caller);
area->flags |= VM_VPAGES;
} else {
/**
* __vmalloc_node - allocate virtually contiguous memory
* @size: allocation size
+ * @align: desired alignment
* @gfp_mask: flags for the page level allocator
* @prot: protection mask for the allocated pages
* @node: node to use for allocation or -1
* allocator with @gfp_mask flags. Map them into contiguous
* kernel virtual space, using a pagetable protection of @prot.
*/
-static void *__vmalloc_node(unsigned long size, gfp_t gfp_mask, pgprot_t prot,
- int node, void *caller)
+static void *__vmalloc_node(unsigned long size, unsigned long align,
+ gfp_t gfp_mask, pgprot_t prot,
+ int node, void *caller)
{
struct vm_struct *area;
void *addr;
if (!size || (size >> PAGE_SHIFT) > totalram_pages)
return NULL;
- area = __get_vm_area_node(size, VM_ALLOC, VMALLOC_START, VMALLOC_END,
- node, gfp_mask, caller);
+ area = __get_vm_area_node(size, align, VM_ALLOC, VMALLOC_START,
+ VMALLOC_END, node, gfp_mask, caller);
if (!area)
return NULL;
void *__vmalloc(unsigned long size, gfp_t gfp_mask, pgprot_t prot)
{
- return __vmalloc_node(size, gfp_mask, prot, -1,
+ return __vmalloc_node(size, 1, gfp_mask, prot, -1,
__builtin_return_address(0));
}
EXPORT_SYMBOL(__vmalloc);
*/
void *vmalloc(unsigned long size)
{
- return __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
+ return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
-1, __builtin_return_address(0));
}
EXPORT_SYMBOL(vmalloc);
struct vm_struct *area;
void *ret;
- ret = __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
+ ret = __vmalloc_node(size, SHMLBA,
+ GFP_KERNEL | __GFP_HIGHMEM | __GFP_ZERO,
PAGE_KERNEL, -1, __builtin_return_address(0));
if (ret) {
area = find_vm_area(ret);
*/
void *vmalloc_node(unsigned long size, int node)
{
- return __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
+ return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL,
node, __builtin_return_address(0));
}
EXPORT_SYMBOL(vmalloc_node);
void *vmalloc_exec(unsigned long size)
{
- return __vmalloc_node(size, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC,
+ return __vmalloc_node(size, 1, GFP_KERNEL | __GFP_HIGHMEM, PAGE_KERNEL_EXEC,
-1, __builtin_return_address(0));
}
*/
void *vmalloc_32(unsigned long size)
{
- return __vmalloc_node(size, GFP_VMALLOC32, PAGE_KERNEL,
+ return __vmalloc_node(size, 1, GFP_VMALLOC32, PAGE_KERNEL,
-1, __builtin_return_address(0));
}
EXPORT_SYMBOL(vmalloc_32);
struct vm_struct *area;
void *ret;
- ret = __vmalloc_node(size, GFP_VMALLOC32 | __GFP_ZERO, PAGE_KERNEL,
+ ret = __vmalloc_node(size, 1, GFP_VMALLOC32 | __GFP_ZERO, PAGE_KERNEL,
-1, __builtin_return_address(0));
if (ret) {
area = find_vm_area(ret);
*/
lru = LRU_UNEVICTABLE;
add_page_to_unevictable_list(page);
+ /*
+ * When racing with an mlock clearing (page is
+ * unlocked), make sure that if the other thread does
+ * not observe our setting of PG_lru and fails
+ * isolation, we see PG_mlocked cleared below and move
+ * the page back to the evictable list.
+ *
+ * The other side is TestClearPageMlocked().
+ */
+ smp_mb();
}
/*
* processes. Try to unmap it here.
*/
if (page_mapped(page) && mapping) {
- switch (try_to_unmap(page, 0)) {
+ switch (try_to_unmap(page, TTU_UNMAP)) {
case SWAP_FAIL:
goto activate_locked;
case SWAP_AGAIN:
int lumpy_reclaim = 0;
while (unlikely(too_many_isolated(zone, file, sc))) {
- congestion_wait(WRITE, HZ/10);
+ congestion_wait(BLK_RW_ASYNC, HZ/10);
/* We are about to die and free our memory. Return now. */
if (fatal_signal_pending(current))
* IO, plus JVM can create lots of anon VM_EXEC pages,
* so we ignore them here.
*/
- if ((vm_flags & VM_EXEC) && !PageAnon(page)) {
+ if ((vm_flags & VM_EXEC) && page_is_file_cache(page)) {
list_add(&page->lru, &l_active);
continue;
}
*
* If the caller is !__GFP_FS then the probability of a failure is reasonably
* high - the zone may be full of dirty or under-writeback pages, which this
- * caller can't do much about. We kick pdflush and take explicit naps in the
- * hope that some of these pages can be written. But if the allocating task
- * holds filesystem locks which prevent writeout this might not work, and the
- * allocation attempt will fail.
+ * caller can't do much about. We kick the writeback threads and take explicit
+ * naps in the hope that some of these pages can be written. But if the
+ * allocating task holds filesystem locks which prevent writeout this might not
+ * work, and the allocation attempt will fail.
*
* returns: 0, if no pages reclaimed
* else, the number of pages reclaimed
#ifdef CONFIG_CGROUP_MEM_RES_CTLR
+unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
+ gfp_t gfp_mask, bool noswap,
+ unsigned int swappiness,
+ struct zone *zone, int nid)
+{
+ struct scan_control sc = {
+ .may_writepage = !laptop_mode,
+ .may_unmap = 1,
+ .may_swap = !noswap,
+ .swap_cluster_max = SWAP_CLUSTER_MAX,
+ .swappiness = swappiness,
+ .order = 0,
+ .mem_cgroup = mem,
+ .isolate_pages = mem_cgroup_isolate_pages,
+ };
+ nodemask_t nm = nodemask_of_node(nid);
+
+ sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
+ (GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
+ sc.nodemask = &nm;
+ sc.nr_reclaimed = 0;
+ sc.nr_scanned = 0;
+ /*
+ * NOTE: Although we can get the priority field, using it
+ * here is not a good idea, since it limits the pages we can scan.
+ * if we don't reclaim here, the shrink_zone from balance_pgdat
+ * will pick up pages from other mem cgroup's as well. We hack
+ * the priority and make it zero.
+ */
+ shrink_zone(0, zone, &sc);
+ return sc.nr_reclaimed;
+}
+
unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
gfp_t gfp_mask,
bool noswap,
unsigned int swappiness)
{
+ struct zonelist *zonelist;
struct scan_control sc = {
.may_writepage = !laptop_mode,
.may_unmap = 1,
.isolate_pages = mem_cgroup_isolate_pages,
.nodemask = NULL, /* we don't care the placement */
};
- struct zonelist *zonelist;
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
for (i = 0; i <= end_zone; i++) {
struct zone *zone = pgdat->node_zones + i;
int nr_slab;
+ int nid, zid;
if (!populated_zone(zone))
continue;
temp_priority[i] = priority;
sc.nr_scanned = 0;
note_zone_scanning_priority(zone, priority);
+
+ nid = pgdat->node_id;
+ zid = zone_idx(zone);
+ /*
+ * Call soft limit reclaim before calling shrink_zone.
+ * For now we ignore the return value
+ */
+ mem_cgroup_soft_limit_reclaim(zone, order, sc.gfp_mask,
+ nid, zid);
/*
* We put equal pressure on every zone, unless one
* zone has way too many pages free already.
unsigned long scan_unevictable_pages;
int scan_unevictable_handler(struct ctl_table *table, int write,
- struct file *file, void __user *buffer,
+ void __user *buffer,
size_t *length, loff_t *ppos)
{
- proc_doulongvec_minmax(table, write, file, buffer, length, ppos);
+ proc_doulongvec_minmax(table, write, buffer, length, ppos);
if (write && *(unsigned long *)table->data)
scan_all_zones_unevictable_pages();
struct vlan_dev_info *vlan = vlan_dev_info(dev);
return nla_total_size(2) + /* IFLA_VLAN_ID */
+ sizeof(struct ifla_vlan_flags) + /* IFLA_VLAN_FLAGS */
vlan_qos_map_size(vlan->nr_ingress_mappings) +
vlan_qos_map_size(vlan->nr_egress_mappings);
}
memset(&fid->qid, 0, sizeof(struct p9_qid));
fid->mode = -1;
- fid->rdir_fpos = 0;
fid->uid = current_fsuid();
fid->clnt = clnt;
- fid->aux = NULL;
-
+ fid->rdir = NULL;
spin_lock_irqsave(&clnt->lock, flags);
list_add(&fid->flist, &clnt->fidlist);
spin_unlock_irqrestore(&clnt->lock, flags);
spin_lock_irqsave(&clnt->lock, flags);
list_del(&fid->flist);
spin_unlock_irqrestore(&clnt->lock, flags);
+ kfree(fid->rdir);
kfree(fid);
}
#include <net/9p/transport.h>
#include <linux/scatterlist.h>
#include <linux/virtio.h>
-#include <linux/virtio_ids.h>
#include <linux/virtio_9p.h>
#define VIRTQUEUE_NUM 128
}
int vcc_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct atm_vcc *vcc;
unsigned long value;
int vcc_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
int vcc_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
int vcc_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
int vcc_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen);
}
static int pvc_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
int error;
static int svc_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct atm_vcc *vcc = ATM_SD(sock);
ax25_dev *ax25_dev;
ax25_cb *ax25;
unsigned int k;
+ int ret = 0;
if (copy_from_user(&ax25_ctl, arg, sizeof(ax25_ctl)))
return -EFAULT;
case AX25_WINDOW:
if (ax25->modulus == AX25_MODULUS) {
if (ax25_ctl.arg < 1 || ax25_ctl.arg > 7)
- return -EINVAL;
+ goto einval_put;
} else {
if (ax25_ctl.arg < 1 || ax25_ctl.arg > 63)
- return -EINVAL;
+ goto einval_put;
}
ax25->window = ax25_ctl.arg;
break;
case AX25_T1:
if (ax25_ctl.arg < 1)
- return -EINVAL;
+ goto einval_put;
ax25->rtt = (ax25_ctl.arg * HZ) / 2;
ax25->t1 = ax25_ctl.arg * HZ;
break;
case AX25_T2:
if (ax25_ctl.arg < 1)
- return -EINVAL;
+ goto einval_put;
ax25->t2 = ax25_ctl.arg * HZ;
break;
case AX25_N2:
if (ax25_ctl.arg < 1 || ax25_ctl.arg > 31)
- return -EINVAL;
+ goto einval_put;
ax25->n2count = 0;
ax25->n2 = ax25_ctl.arg;
break;
case AX25_T3:
if (ax25_ctl.arg < 0)
- return -EINVAL;
+ goto einval_put;
ax25->t3 = ax25_ctl.arg * HZ;
break;
case AX25_IDLE:
if (ax25_ctl.arg < 0)
- return -EINVAL;
+ goto einval_put;
ax25->idle = ax25_ctl.arg * 60 * HZ;
break;
case AX25_PACLEN:
if (ax25_ctl.arg < 16 || ax25_ctl.arg > 65535)
- return -EINVAL;
+ goto einval_put;
ax25->paclen = ax25_ctl.arg;
break;
default:
- return -EINVAL;
+ goto einval_put;
}
- return 0;
+out_put:
+ ax25_cb_put(ax25);
+ return ret;
+
+einval_put:
+ ret = -EINVAL;
+ goto out_put;
}
static void ax25_fillin_cb_from_dev(ax25_cb *ax25, ax25_dev *ax25_dev)
*/
static int ax25_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
ax25_cb *ax25;
case SO_BINDTODEVICE:
if (optlen > IFNAMSIZ)
- optlen=IFNAMSIZ;
- if (copy_from_user(devname, optval, optlen)) {
- res = -EFAULT;
- break;
- }
+ optlen = IFNAMSIZ;
- dev = dev_get_by_name(&init_net, devname);
- if (dev == NULL) {
- res = -ENODEV;
+ if (copy_from_user(devname, optval, optlen)) {
+ res = -EFAULT;
break;
}
(sock->state != SS_UNCONNECTED ||
sk->sk_state == TCP_LISTEN)) {
res = -EADDRNOTAVAIL;
- dev_put(dev);
+ break;
+ }
+
+ dev = dev_get_by_name(&init_net, devname);
+ if (!dev) {
+ res = -ENODEV;
break;
}
ax25->ax25_dev = ax25_dev_ax25dev(dev);
ax25_fillin_cb(ax25, ax25->ax25_dev);
+ dev_put(dev);
break;
default:
sock_init_data(NULL, sk);
- sk->sk_destruct = ax25_free_sock;
sk->sk_type = osk->sk_type;
sk->sk_priority = osk->sk_priority;
sk->sk_protocol = osk->sk_protocol;
}
sk->sk_protinfo = ax25;
+ sk->sk_destruct = ax25_free_sock;
ax25->sk = sk;
return sk;
ax25_info.idletimer = ax25_display_timer(&ax25->idletimer) / (60 * HZ);
ax25_info.n2count = ax25->n2count;
ax25_info.state = ax25->state;
- ax25_info.rcv_q = sk_wmem_alloc_get(sk);
- ax25_info.snd_q = sk_rmem_alloc_get(sk);
+ ax25_info.rcv_q = sk_rmem_alloc_get(sk);
+ ax25_info.snd_q = sk_wmem_alloc_get(sk);
ax25_info.vs = ax25->vs;
ax25_info.vr = ax25->vr;
ax25_info.va = ax25->va;
goto done;
}
-static int hci_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int len)
+static int hci_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int len)
{
struct hci_ufilter uf = { .opcode = 0 };
struct sock *sk = sock->sk;
dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
+ dev_set_drvdata(&conn->dev, conn);
+
if (device_add(&conn->dev) < 0) {
BT_ERR("Failed to register connection device");
return;
conn->dev.class = bt_class;
conn->dev.parent = &hdev->dev;
- dev_set_drvdata(&conn->dev, conn);
-
device_initialize(&conn->dev);
INIT_WORK(&conn->work_add, add_conn);
conn->feat_mask = 0;
- setup_timer(&conn->info_timer, l2cap_info_timeout,
- (unsigned long) conn);
-
spin_lock_init(&conn->lock);
rwlock_init(&conn->chan_list.lock);
+ setup_timer(&conn->info_timer, l2cap_info_timeout,
+ (unsigned long) conn);
+
conn->disc_reason = 0x13;
return conn;
/* Default config options */
pi->conf_len = 0;
pi->flush_to = L2CAP_DEFAULT_FLUSH_TO;
+ skb_queue_head_init(TX_QUEUE(sk));
+ skb_queue_head_init(SREJ_QUEUE(sk));
+ INIT_LIST_HEAD(SREJ_LIST(sk));
}
static struct proto l2cap_proto = {
return bt_sock_recvmsg(iocb, sock, msg, len, flags);
}
-static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, int optlen)
+static int l2cap_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct l2cap_options opts;
return err;
}
-static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct bt_security sec;
return copied ? : err;
}
-static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, int optlen)
+static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
int err = 0;
return err;
}
-static int rfcomm_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+static int rfcomm_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct bt_security sec;
return err;
}
-static int sco_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+static int sco_sock_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
int err = 0;
br_fdb_delete_by_port(br, p, 1);
err1:
kobject_put(&p->kobj);
+ p = NULL; /* kobject_put frees */
err0:
dev_set_promiscuity(dev, -1);
put_back:
#ifdef CONFIG_SYSCTL
static
-int brnf_sysctl_call_tables(ctl_table * ctl, int write, struct file *filp,
+int brnf_sysctl_call_tables(ctl_table * ctl, int write,
void __user * buffer, size_t * lenp, loff_t * ppos)
{
int ret;
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write && *(int *)(ctl->data))
*(int *)(ctl->data) = 1;
}
static int raw_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct raw_sock *ro = raw_sk(sk);
};
static int do_set_attach_filter(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct compat_sock_fprog __user *fprog32 = (struct compat_sock_fprog __user *)optval;
struct sock_fprog __user *kfprog = compat_alloc_user_space(sizeof(struct sock_fprog));
}
static int do_set_sock_timeout(struct socket *sock, int level,
- int optname, char __user *optval, int optlen)
+ int optname, char __user *optval, unsigned int optlen)
{
struct compat_timeval __user *up = (struct compat_timeval __user *) optval;
struct timeval ktime;
}
static int compat_sock_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (optname == SO_ATTACH_FILTER)
return do_set_attach_filter(sock, level, optname,
}
asmlinkage long compat_sys_setsockopt(int fd, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
int err;
struct socket *sock;
int compat_mc_setsockopt(struct sock *sock, int level, int optname,
- char __user *optval, int optlen,
- int (*setsockopt)(struct sock *,int,int,char __user *,int))
+ char __user *optval, unsigned int optlen,
+ int (*setsockopt)(struct sock *,int,int,char __user *,unsigned int))
{
char __user *koptval = optval;
int koptlen = optlen;
consume_skb(skb);
sk_mem_reclaim_partial(sk);
}
+EXPORT_SYMBOL(skb_free_datagram);
+
+void skb_free_datagram_locked(struct sock *sk, struct sk_buff *skb)
+{
+ lock_sock(sk);
+ skb_free_datagram(sk, skb);
+ release_sock(sk);
+}
+EXPORT_SYMBOL(skb_free_datagram_locked);
/**
* skb_kill_datagram - Free a datagram skbuff forcibly
EXPORT_SYMBOL(datagram_poll);
EXPORT_SYMBOL(skb_copy_and_csum_datagram_iovec);
EXPORT_SYMBOL(skb_copy_datagram_iovec);
-EXPORT_SYMBOL(skb_free_datagram);
EXPORT_SYMBOL(skb_recv_datagram);
int ret = NET_RX_DROP;
__be16 type;
+ if (!skb->tstamp.tv64)
+ net_timestamp(skb);
+
if (skb->vlan_tci && vlan_hwaccel_do_receive(skb))
return NET_RX_SUCCESS;
if (netpoll_receive_skb(skb))
return NET_RX_DROP;
- if (!skb->tstamp.tv64)
- net_timestamp(skb);
-
if (!skb->iif)
skb->iif = skb->dev->ifindex;
#include <net/sock.h>
#include <linux/rtnetlink.h>
#include <linux/wireless.h>
-#include <net/iw_handler.h>
+#include <net/wext.h>
#include "net-sysfs.h"
char *))
{
struct net_device *dev = to_net_dev(d);
- const struct iw_statistics *iw = NULL;
+ const struct iw_statistics *iw;
ssize_t ret = -EINVAL;
- read_lock(&dev_base_lock);
+ rtnl_lock();
if (dev_isalive(dev)) {
- if (dev->wireless_handlers &&
- dev->wireless_handlers->get_wireless_stats)
- iw = dev->wireless_handlers->get_wireless_stats(dev);
- if (iw != NULL)
+ iw = get_wireless_stats(dev);
+ if (iw)
ret = (*format)(iw, buf);
}
- read_unlock(&dev_base_lock);
+ rtnl_unlock();
return ret;
}
*groups++ = &netstat_group;
#ifdef CONFIG_WIRELESS_EXT_SYSFS
- if (net->wireless_handlers && net->wireless_handlers->get_wireless_stats)
+ if (net->wireless_handlers || net->ieee80211_ptr)
*groups++ = &wireless_group;
#endif
#endif /* CONFIG_SYSFS */
#define F_QUEUE_MAP_CPU (1<<14) /* queue map mirrors smp_processor_id() */
/* Thread control flag bits */
-#define T_TERMINATE (1<<0)
-#define T_STOP (1<<1) /* Stop run */
-#define T_RUN (1<<2) /* Start run */
-#define T_REMDEVALL (1<<3) /* Remove all devs */
-#define T_REMDEV (1<<4) /* Remove one dev */
+#define T_STOP (1<<0) /* Stop run */
+#define T_RUN (1<<1) /* Start run */
+#define T_REMDEVALL (1<<2) /* Remove all devs */
+#define T_REMDEV (1<<3) /* Remove one dev */
/* If lock -- can be removed after some work */
#define if_lock(t) spin_lock(&(t->if_lock));
__u32 cur_src_mac_offset;
__be32 cur_saddr;
__be32 cur_daddr;
+ __u16 ip_id;
__u16 cur_udp_dst;
__u16 cur_udp_src;
__u16 cur_queue_map;
if (value == 0x7FFFFFFF)
pkt_dev->delay = ULLONG_MAX;
else
- pkt_dev->delay = (u64)value * NSEC_PER_USEC;
+ pkt_dev->delay = (u64)value;
sprintf(pg_result, "OK: delay=%llu",
(unsigned long long) pkt_dev->delay);
static void spin(struct pktgen_dev *pkt_dev, ktime_t spin_until)
{
- ktime_t start;
- s32 remaining;
+ ktime_t start_time, end_time;
+ s64 remaining;
struct hrtimer_sleeper t;
hrtimer_init_on_stack(&t.timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
hrtimer_set_expires(&t.timer, spin_until);
remaining = ktime_to_us(hrtimer_expires_remaining(&t.timer));
- if (remaining <= 0)
+ if (remaining <= 0) {
+ pkt_dev->next_tx = ktime_add_ns(spin_until, pkt_dev->delay);
return;
+ }
- start = ktime_now();
+ start_time = ktime_now();
if (remaining < 100)
udelay(remaining); /* really small just spin */
else {
} while (t.task && pkt_dev->running && !signal_pending(current));
__set_current_state(TASK_RUNNING);
}
- pkt_dev->idle_acc += ktime_to_ns(ktime_sub(ktime_now(), start));
+ end_time = ktime_now();
+
+ pkt_dev->idle_acc += ktime_to_ns(ktime_sub(end_time, start_time));
+ pkt_dev->next_tx = ktime_add_ns(end_time, pkt_dev->delay);
}
static inline void set_pkt_overhead(struct pktgen_dev *pkt_dev)
if (pkt_dev->flags & F_QUEUE_MAP_CPU)
pkt_dev->cur_queue_map = smp_processor_id();
- else if (pkt_dev->queue_map_min < pkt_dev->queue_map_max) {
+ else if (pkt_dev->queue_map_min <= pkt_dev->queue_map_max) {
__u16 t;
if (pkt_dev->flags & F_QUEUE_MAP_RND) {
t = random32() %
iph->protocol = IPPROTO_UDP; /* UDP */
iph->saddr = pkt_dev->cur_saddr;
iph->daddr = pkt_dev->cur_daddr;
+ iph->id = htons(pkt_dev->ip_id);
+ pkt_dev->ip_id++;
iph->frag_off = 0;
iplen = 20 + 8 + datalen;
iph->tot_len = htons(iplen);
skb->dev = odev;
skb->pkt_type = PACKET_HOST;
- if (pkt_dev->nfrags <= 0)
+ if (pkt_dev->nfrags <= 0) {
pgh = (struct pktgen_hdr *)skb_put(skb, datalen);
- else {
+ memset(pgh + 1, 0, datalen - sizeof(struct pktgen_hdr));
+ } else {
int frags = pkt_dev->nfrags;
- int i;
+ int i, len;
pgh = (struct pktgen_hdr *)(((char *)(udph)) + 8);
if (frags > MAX_SKB_FRAGS)
frags = MAX_SKB_FRAGS;
if (datalen > frags * PAGE_SIZE) {
- skb_put(skb, datalen - frags * PAGE_SIZE);
+ len = datalen - frags * PAGE_SIZE;
+ memset(skb_put(skb, len), 0, len);
datalen = frags * PAGE_SIZE;
}
i = 0;
while (datalen > 0) {
- struct page *page = alloc_pages(GFP_KERNEL, 0);
+ struct page *page = alloc_pages(GFP_KERNEL | __GFP_ZERO, 0);
skb_shinfo(skb)->frags[i].page = page;
skb_shinfo(skb)->frags[i].page_offset = 0;
skb_shinfo(skb)->frags[i].size =
mutex_unlock(&pktgen_thread_lock);
}
-static void idle(struct pktgen_dev *pkt_dev)
+static void pktgen_resched(struct pktgen_dev *pkt_dev)
{
ktime_t idle_start = ktime_now();
+ schedule();
+ pkt_dev->idle_acc += ktime_to_ns(ktime_sub(ktime_now(), idle_start));
+}
- if (need_resched())
- schedule();
- else
- cpu_relax();
+static void pktgen_wait_for_skb(struct pktgen_dev *pkt_dev)
+{
+ ktime_t idle_start = ktime_now();
+ while (atomic_read(&(pkt_dev->skb->users)) != 1) {
+ if (signal_pending(current))
+ break;
+
+ if (need_resched())
+ pktgen_resched(pkt_dev);
+ else
+ cpu_relax();
+ }
pkt_dev->idle_acc += ktime_to_ns(ktime_sub(ktime_now(), idle_start));
}
-
static void pktgen_xmit(struct pktgen_dev *pkt_dev)
{
struct net_device *odev = pkt_dev->odev;
u16 queue_map;
int ret;
- if (pkt_dev->delay) {
- spin(pkt_dev, pkt_dev->next_tx);
-
- /* This is max DELAY, this has special meaning of
- * "never transmit"
- */
- if (pkt_dev->delay == ULLONG_MAX) {
- pkt_dev->next_tx = ktime_add_ns(ktime_now(), ULONG_MAX);
- return;
- }
- }
-
- if (!pkt_dev->skb) {
- set_cur_queue_map(pkt_dev);
- queue_map = pkt_dev->cur_queue_map;
- } else {
- queue_map = skb_get_queue_mapping(pkt_dev->skb);
+ /* If device is offline, then don't send */
+ if (unlikely(!netif_running(odev) || !netif_carrier_ok(odev))) {
+ pktgen_stop_device(pkt_dev);
+ return;
}
- txq = netdev_get_tx_queue(odev, queue_map);
- /* Did we saturate the queue already? */
- if (netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)) {
- /* If device is down, then all queues are permnantly frozen */
- if (netif_running(odev))
- idle(pkt_dev);
- else
- pktgen_stop_device(pkt_dev);
+ /* This is max DELAY, this has special meaning of
+ * "never transmit"
+ */
+ if (unlikely(pkt_dev->delay == ULLONG_MAX)) {
+ pkt_dev->next_tx = ktime_add_ns(ktime_now(), ULONG_MAX);
return;
}
+ /* If no skb or clone count exhausted then get new one */
if (!pkt_dev->skb || (pkt_dev->last_ok &&
++pkt_dev->clone_count >= pkt_dev->clone_skb)) {
/* build a new pkt */
pkt_dev->clone_count = 0; /* reset counter */
}
- /* fill_packet() might have changed the queue */
+ if (pkt_dev->delay && pkt_dev->last_ok)
+ spin(pkt_dev, pkt_dev->next_tx);
+
queue_map = skb_get_queue_mapping(pkt_dev->skb);
txq = netdev_get_tx_queue(odev, queue_map);
__netif_tx_lock_bh(txq);
- if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)))
- pkt_dev->last_ok = 0;
- else {
- atomic_inc(&(pkt_dev->skb->users));
+ atomic_inc(&(pkt_dev->skb->users));
- retry_now:
+ if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)))
+ ret = NETDEV_TX_BUSY;
+ else
ret = (*xmit)(pkt_dev->skb, odev);
- switch (ret) {
- case NETDEV_TX_OK:
- txq_trans_update(txq);
- pkt_dev->last_ok = 1;
- pkt_dev->sofar++;
- pkt_dev->seq_num++;
- pkt_dev->tx_bytes += pkt_dev->cur_pkt_size;
- break;
- case NETDEV_TX_LOCKED:
- cpu_relax();
- goto retry_now;
- default: /* Drivers are not supposed to return other values! */
- if (net_ratelimit())
- pr_info("pktgen: %s xmit error: %d\n",
- odev->name, ret);
- pkt_dev->errors++;
- /* fallthru */
- case NETDEV_TX_BUSY:
- /* Retry it next time */
- atomic_dec(&(pkt_dev->skb->users));
- pkt_dev->last_ok = 0;
- }
-
- if (pkt_dev->delay)
- pkt_dev->next_tx = ktime_add_ns(ktime_now(),
- pkt_dev->delay);
+
+ switch (ret) {
+ case NETDEV_TX_OK:
+ txq_trans_update(txq);
+ pkt_dev->last_ok = 1;
+ pkt_dev->sofar++;
+ pkt_dev->seq_num++;
+ pkt_dev->tx_bytes += pkt_dev->cur_pkt_size;
+ break;
+ default: /* Drivers are not supposed to return other values! */
+ if (net_ratelimit())
+ pr_info("pktgen: %s xmit error: %d\n",
+ odev->name, ret);
+ pkt_dev->errors++;
+ /* fallthru */
+ case NETDEV_TX_LOCKED:
+ case NETDEV_TX_BUSY:
+ /* Retry it next time */
+ atomic_dec(&(pkt_dev->skb->users));
+ pkt_dev->last_ok = 0;
}
__netif_tx_unlock_bh(txq);
/* If pkt_dev->count is zero, then run forever */
if ((pkt_dev->count != 0) && (pkt_dev->sofar >= pkt_dev->count)) {
- while (atomic_read(&(pkt_dev->skb->users)) != 1) {
- if (signal_pending(current))
- break;
- idle(pkt_dev);
- }
+ pktgen_wait_for_skb(pkt_dev);
/* Done with this */
pktgen_stop_device(pkt_dev);
while (!kthread_should_stop()) {
pkt_dev = next_to_run(t);
- if (!pkt_dev &&
- (t->control & (T_STOP | T_RUN | T_REMDEVALL | T_REMDEV))
- == 0) {
- prepare_to_wait(&(t->queue), &wait,
- TASK_INTERRUPTIBLE);
- schedule_timeout(HZ / 10);
- finish_wait(&(t->queue), &wait);
+ if (unlikely(!pkt_dev && t->control == 0)) {
+ wait_event_interruptible_timeout(t->queue,
+ t->control != 0,
+ HZ/10);
+ continue;
}
__set_current_state(TASK_RUNNING);
- if (pkt_dev)
+ if (likely(pkt_dev)) {
pktgen_xmit(pkt_dev);
+ if (need_resched())
+ pktgen_resched(pkt_dev);
+ else
+ cpu_relax();
+ }
+
if (t->control & T_STOP) {
pktgen_stop(t);
t->control &= ~(T_STOP);
*/
int sock_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
int val;
void sock_wfree(struct sk_buff *skb)
{
struct sock *sk = skb->sk;
- int res;
+ unsigned int len = skb->truesize;
- /* In case it might be waiting for more memory. */
- res = atomic_sub_return(skb->truesize, &sk->sk_wmem_alloc);
- if (!sock_flag(sk, SOCK_USE_WRITE_QUEUE))
+ if (!sock_flag(sk, SOCK_USE_WRITE_QUEUE)) {
+ /*
+ * Keep a reference on sk_wmem_alloc, this will be released
+ * after sk_write_space() call
+ */
+ atomic_sub(len - 1, &sk->sk_wmem_alloc);
sk->sk_write_space(sk);
+ len = 1;
+ }
/*
- * if sk_wmem_alloc reached 0, we are last user and should
- * free this sock, as sk_free() call could not do it.
+ * if sk_wmem_alloc reaches 0, we must finish what sk_free()
+ * could not do because of in-flight packets
*/
- if (res == 0)
+ if (atomic_sub_and_test(len, &sk->sk_wmem_alloc))
__sk_free(sk);
}
EXPORT_SYMBOL(sock_wfree);
EXPORT_SYMBOL(sock_no_shutdown);
int sock_no_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
return -EOPNOTSUPP;
}
* Set socket options on an inet socket.
*/
int sock_common_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
#ifdef CONFIG_COMPAT
int compat_sock_common_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
nlmsg_end(dcbnl_skb, nlh);
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
- goto err;
+ return -EINVAL;
return 0;
nlmsg_failure:
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
- goto err;
+ goto err_out;
return 0;
nlmsg_failure:
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
- goto err;
+ goto err_out;
return 0;
nlmsg_failure:
-err:
kfree_skb(dcbnl_skb);
err_out:
return -EINVAL;
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
- goto err;
+ goto err_out;
return 0;
nlmsg_failure:
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret) {
ret = -EINVAL;
- goto err;
+ goto err_out;
}
return 0;
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
- goto err;
+ goto err_out;
return 0;
ret = rtnl_unicast(dcbnl_skb, &init_net, pid);
if (ret)
- goto err;
+ goto err_out;
return 0;
extern int dccp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
extern int dccp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
#ifdef CONFIG_COMPAT
extern int compat_dccp_getsockopt(struct sock *sk,
int level, int optname,
char __user *optval, int __user *optlen);
extern int compat_dccp_setsockopt(struct sock *sk,
int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
#endif
extern int dccp_ioctl(struct sock *sk, int cmd, unsigned long arg);
extern int dccp_sendmsg(struct kiocb *iocb, struct sock *sk,
EXPORT_SYMBOL_GPL(dccp_ioctl);
static int dccp_setsockopt_service(struct sock *sk, const __be32 service,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct dccp_sock *dp = dccp_sk(sk);
struct dccp_service_list *sl = NULL;
}
static int dccp_setsockopt_ccid(struct sock *sk, int type,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
u8 *val;
int rc = 0;
}
static int do_dccp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct dccp_sock *dp = dccp_sk(sk);
int val, err = 0;
}
int dccp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level != SOL_DCCP)
return inet_csk(sk)->icsk_af_ops->setsockopt(sk, level,
#ifdef CONFIG_COMPAT
int compat_dccp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level != SOL_DCCP)
return inet_csk_compat_setsockopt(sk, level, optname,
static struct hlist_head dn_wild_sk;
static atomic_t decnet_memory_allocated;
-static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen, int flags);
+static int __dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen, int flags);
static int __dn_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen, int flags);
static struct hlist_head *dn_find_list(struct sock *sk)
return err;
}
-static int dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+static int dn_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
int err;
return err;
}
-static int __dn_setsockopt(struct socket *sock, int level,int optname, char __user *optval, int optlen, int flags)
+static int __dn_setsockopt(struct socket *sock, int level,int optname, char __user *optval, unsigned int optlen, int flags)
{
struct sock *sk = sock->sk;
struct dn_scp *scp = DN_SK(sk);
static int min_priority[1];
static int max_priority[] = { 127 }; /* From DECnet spec */
-static int dn_forwarding_proc(ctl_table *, int, struct file *,
+static int dn_forwarding_proc(ctl_table *, int,
void __user *, size_t *, loff_t *);
static int dn_forwarding_sysctl(ctl_table *table,
void __user *oldval, size_t __user *oldlenp,
}
static int dn_forwarding_proc(ctl_table *table, int write,
- struct file *filep,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
dn_db = dev->dn_ptr;
old = dn_db->parms.forwarding;
- err = proc_dointvec(table, write, filep, buffer, lenp, ppos);
+ err = proc_dointvec(table, write, buffer, lenp, ppos);
if ((err >= 0) && write) {
if (dn_db->parms.forwarding < 0)
}
static int dn_node_address_handler(ctl_table *table, int write,
- struct file *filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
static int dn_def_dev_handler(ctl_table *table, int write,
- struct file * filp,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
}
static int dgram_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct dgram_sock *ro = dgram_sk(sk);
int val;
}
static int raw_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
return -EOPNOTSUPP;
}
{
struct flowi fl = {
.oif = sk->sk_bound_dev_if,
+ .mark = sk->sk_mark,
.nl_u = {
.ip4_u = {
.daddr = daddr,
ip_mc_up(in_dev);
/* fall through */
case NETDEV_CHANGEADDR:
- if (IN_DEV_ARP_NOTIFY(in_dev))
- arp_send(ARPOP_REQUEST, ETH_P_ARP,
- in_dev->ifa_list->ifa_address,
- dev,
- in_dev->ifa_list->ifa_address,
- NULL, dev->dev_addr, NULL);
+ /* Send gratuitous ARP to notify of link change */
+ if (IN_DEV_ARP_NOTIFY(in_dev)) {
+ struct in_ifaddr *ifa = in_dev->ifa_list;
+
+ if (ifa)
+ arp_send(ARPOP_REQUEST, ETH_P_ARP,
+ ifa->ifa_address, dev,
+ ifa->ifa_address, NULL,
+ dev->dev_addr, NULL);
+ }
break;
case NETDEV_DOWN:
ip_mc_down(in_dev);
}
static int devinet_conf_proc(ctl_table *ctl, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
- int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write) {
struct ipv4_devconf *cnf = ctl->extra1;
}
static int devinet_sysctl_forward(ctl_table *ctl, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
- int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write && *valp != val) {
struct net *net = ctl->extra2;
}
int ipv4_doint_and_flush(ctl_table *ctl, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
- int ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
struct net *net = ctl->extra2;
if (write && *valp != val)
*/
int fib_validate_source(__be32 src, __be32 dst, u8 tos, int oif,
- struct net_device *dev, __be32 *spec_dst, u32 *itag)
+ struct net_device *dev, __be32 *spec_dst,
+ u32 *itag, u32 mark)
{
struct in_device *in_dev;
struct flowi fl = { .nl_u = { .ip4_u =
{ .daddr = src,
.saddr = dst,
.tos = tos } },
+ .mark = mark,
.iif = oif };
+
struct fib_result res;
int no_addr, rpf;
int ret;
EXPORT_SYMBOL_GPL(inet_csk_reqsk_queue_hash_add);
+/* Decide when to expire the request and when to resend SYN-ACK */
+static inline void syn_ack_recalc(struct request_sock *req, const int thresh,
+ const int max_retries,
+ const u8 rskq_defer_accept,
+ int *expire, int *resend)
+{
+ if (!rskq_defer_accept) {
+ *expire = req->retrans >= thresh;
+ *resend = 1;
+ return;
+ }
+ *expire = req->retrans >= thresh &&
+ (!inet_rsk(req)->acked || req->retrans >= max_retries);
+ /*
+ * Do not resend while waiting for data after ACK,
+ * start to resend on end of deferring period to give
+ * last chance for data or ACK to create established socket.
+ */
+ *resend = !inet_rsk(req)->acked ||
+ req->retrans >= rskq_defer_accept - 1;
+}
+
void inet_csk_reqsk_queue_prune(struct sock *parent,
const unsigned long interval,
const unsigned long timeout,
reqp=&lopt->syn_table[i];
while ((req = *reqp) != NULL) {
if (time_after_eq(now, req->expires)) {
- if ((req->retrans < thresh ||
- (inet_rsk(req)->acked && req->retrans < max_retries))
- && !req->rsk_ops->rtx_syn_ack(parent, req)) {
+ int expire = 0, resend = 0;
+
+ syn_ack_recalc(req, thresh, max_retries,
+ queue->rskq_defer_accept,
+ &expire, &resend);
+ if (!expire &&
+ (!resend ||
+ !req->rsk_ops->rtx_syn_ack(parent, req) ||
+ inet_rsk(req)->acked)) {
unsigned long timeo;
if (req->retrans++ == 0)
EXPORT_SYMBOL_GPL(inet_csk_compat_getsockopt);
int inet_csk_compat_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
const struct inet_connection_sock *icsk = inet_csk(sk);
solution, but it supposes maintaing new variable in ALL
skb, even if no tunneling is used.
- Current solution: t->recursion lock breaks dead loops. It looks
- like dev->tbusy flag, but I preferred new variable, because
- the semantics is different. One day, when hard_start_xmit
- will be multithreaded we will have to use skb->encapsulation.
+ Current solution: HARD_TX_LOCK lock breaks dead loops.
__be32 dst;
int mtu;
- if (tunnel->recursion++) {
- stats->collisions++;
- goto tx_error;
- }
-
if (dev->type == ARPHRD_ETHER)
IPCB(skb)->flags = 0;
ip_rt_put(rt);
stats->tx_dropped++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
if (skb->sk)
nf_reset(skb);
IPTUNNEL_XMIT();
- tunnel->recursion--;
return NETDEV_TX_OK;
tx_error_icmp:
tx_error:
stats->tx_errors++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
ether_setup(dev);
- dev->netdev_ops = &ipgre_netdev_ops;
+ dev->netdev_ops = &ipgre_tap_netdev_ops;
dev->destructor = free_netdev;
dev->iflink = 0;
if (t->dev != dev)
return -EEXIST;
} else {
- unsigned nflags = 0;
-
t = nt;
- if (ipv4_is_multicast(p.iph.daddr))
- nflags = IFF_BROADCAST;
- else if (p.iph.daddr)
- nflags = IFF_POINTOPOINT;
+ if (dev->type != ARPHRD_ETHER) {
+ unsigned nflags = 0;
- if ((dev->flags ^ nflags) &
- (IFF_POINTOPOINT | IFF_BROADCAST))
- return -EINVAL;
+ if (ipv4_is_multicast(p.iph.daddr))
+ nflags = IFF_BROADCAST;
+ else if (p.iph.daddr)
+ nflags = IFF_POINTOPOINT;
+
+ if ((dev->flags ^ nflags) &
+ (IFF_POINTOPOINT | IFF_BROADCAST))
+ return -EINVAL;
+ }
ipgre_tunnel_unlink(ign, t);
t->parms.iph.saddr = p.iph.saddr;
t->parms.iph.daddr = p.iph.daddr;
t->parms.i_key = p.i_key;
- memcpy(dev->dev_addr, &p.iph.saddr, 4);
- memcpy(dev->broadcast, &p.iph.daddr, 4);
+ if (dev->type != ARPHRD_ETHER) {
+ memcpy(dev->dev_addr, &p.iph.saddr, 4);
+ memcpy(dev->broadcast, &p.iph.daddr, 4);
+ }
ipgre_tunnel_link(ign, t);
netdev_state_change(dev);
}
{
struct flowi fl = { .oif = sk->sk_bound_dev_if,
+ .mark = sk->sk_mark,
.nl_u = { .ip4_u =
{ .daddr = daddr,
.saddr = inet->saddr,
*/
static int do_ip_setsockopt(struct sock *sk, int level,
- int optname, char __user *optval, int optlen)
+ int optname, char __user *optval, unsigned int optlen)
{
struct inet_sock *inet = inet_sk(sk);
int val = 0, err;
* Check the arguments are allowable
*/
+ if (optlen < sizeof(struct in_addr))
+ goto e_inval;
+
err = -EFAULT;
if (optlen >= sizeof(struct ip_mreqn)) {
if (copy_from_user(&mreq, optval, sizeof(mreq)))
break;
}
dev = ip_dev_find(sock_net(sk), mreq.imr_address.s_addr);
- if (dev) {
+ if (dev)
mreq.imr_ifindex = dev->ifindex;
- dev_put(dev);
- }
} else
- dev = __dev_get_by_index(sock_net(sk), mreq.imr_ifindex);
+ dev = dev_get_by_index(sock_net(sk), mreq.imr_ifindex);
err = -EADDRNOTAVAIL;
if (!dev)
break;
+ dev_put(dev);
err = -EINVAL;
if (sk->sk_bound_dev_if &&
}
int ip_setsockopt(struct sock *sk, int level,
- int optname, char __user *optval, int optlen)
+ int optname, char __user *optval, unsigned int optlen)
{
int err;
#ifdef CONFIG_COMPAT
int compat_ip_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
int err;
__be32 dst = tiph->daddr;
int mtu;
- if (tunnel->recursion++) {
- stats->collisions++;
- goto tx_error;
- }
-
if (skb->protocol != htons(ETH_P_IP))
goto tx_error;
ip_rt_put(rt);
stats->tx_dropped++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
if (skb->sk)
nf_reset(skb);
IPTUNNEL_XMIT();
- tunnel->recursion--;
return NETDEV_TX_OK;
tx_error_icmp:
tx_error:
stats->tx_errors++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
* MOSPF/PIM router set up we can clean this up.
*/
-int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int optlen)
+int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen)
{
int ret;
struct vifctl vif;
skb->ip_summed = CHECKSUM_NONE;
skb->transport_header = skb->network_header;
- err = memcpy_fromiovecend((void *)iph, from, 0, length);
- if (err)
- goto error_fault;
+ err = -EFAULT;
+ if (memcpy_fromiovecend((void *)iph, from, 0, length))
+ goto error_free;
- /* We don't modify invalid header */
iphlen = iph->ihl * 4;
- if (iphlen >= sizeof(*iph) && iphlen <= length) {
+
+ /*
+ * We don't want to modify the ip header, but we do need to
+ * be sure that it won't cause problems later along the network
+ * stack. Specifically we want to make sure that iph->ihl is a
+ * sane value. If ihl points beyond the length of the buffer passed
+ * in, reject the frame as invalid
+ */
+ err = -EINVAL;
+ if (iphlen > length)
+ goto error_free;
+
+ if (iphlen >= sizeof(*iph)) {
if (!iph->saddr)
iph->saddr = rt->rt_src;
iph->check = 0;
out:
return 0;
-error_fault:
- err = -EFAULT;
+error_free:
kfree_skb(skb);
error:
IP_INC_STATS(net, IPSTATS_MIB_OUTDISCARDS);
}
static int do_raw_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (optname == ICMP_FILTER) {
if (inet_sk(sk)->num != IPPROTO_ICMP)
}
static int raw_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level != SOL_RAW)
return ip_setsockopt(sk, level, optname, optval, optlen);
#ifdef CONFIG_COMPAT
static int compat_raw_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level != SOL_RAW)
return compat_ip_setsockopt(sk, level, optname, optval, optlen);
goto e_inval;
spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
} else if (fib_validate_source(saddr, 0, tos, 0,
- dev, &spec_dst, &itag) < 0)
+ dev, &spec_dst, &itag, 0) < 0)
goto e_inval;
rth = dst_alloc(&ipv4_dst_ops);
err = fib_validate_source(saddr, daddr, tos, FIB_RES_OIF(*res),
- in_dev->dev, &spec_dst, &itag);
+ in_dev->dev, &spec_dst, &itag, skb->mark);
if (err < 0) {
ip_handle_martian_source(in_dev->dev, in_dev, skb, daddr,
saddr);
int result;
result = fib_validate_source(saddr, daddr, tos,
net->loopback_dev->ifindex,
- dev, &spec_dst, &itag);
+ dev, &spec_dst, &itag, skb->mark);
if (result < 0)
goto martian_source;
if (result)
spec_dst = inet_select_addr(dev, 0, RT_SCOPE_LINK);
else {
err = fib_validate_source(saddr, 0, tos, 0, dev, &spec_dst,
- &itag);
+ &itag, skb->mark);
if (err < 0)
goto martian_source;
if (err)
#ifdef CONFIG_SYSCTL
static int ipv4_sysctl_rtcache_flush(ctl_table *__ctl, int write,
- struct file *filp, void __user *buffer,
+ void __user *buffer,
size_t *lenp, loff_t *ppos)
{
if (write) {
memcpy(&ctl, __ctl, sizeof(ctl));
ctl.data = &flush_delay;
- proc_dointvec(&ctl, write, filp, buffer, lenp, ppos);
+ proc_dointvec(&ctl, write, buffer, lenp, ppos);
net = (struct net *)__ctl->extra1;
rt_cache_flush(net, flush_delay);
}
static int ipv4_sysctl_rt_secret_interval(ctl_table *ctl, int write,
- struct file *filp,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int old = ip_rt_secret_interval;
- int ret = proc_dointvec_jiffies(ctl, write, filp, buffer, lenp, ppos);
+ int ret = proc_dointvec_jiffies(ctl, write, buffer, lenp, ppos);
rt_secret_reschedule(old);
}
/* Validate changes from /proc interface. */
-static int ipv4_local_port_range(ctl_table *table, int write, struct file *filp,
+static int ipv4_local_port_range(ctl_table *table, int write,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
};
inet_get_local_port_range(range, range + 1);
- ret = proc_dointvec_minmax(&tmp, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
if (write && ret == 0) {
if (range[1] < range[0])
}
-static int proc_tcp_congestion_control(ctl_table *ctl, int write, struct file * filp,
+static int proc_tcp_congestion_control(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char val[TCP_CA_NAME_MAX];
tcp_get_default_congestion_control(val);
- ret = proc_dostring(&tbl, write, filp, buffer, lenp, ppos);
+ ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
if (write && ret == 0)
ret = tcp_set_default_congestion_control(val);
return ret;
}
static int proc_tcp_available_congestion_control(ctl_table *ctl,
- int write, struct file * filp,
+ int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
if (!tbl.data)
return -ENOMEM;
tcp_get_available_congestion_control(tbl.data, TCP_CA_BUF_MAX);
- ret = proc_dostring(&tbl, write, filp, buffer, lenp, ppos);
+ ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
kfree(tbl.data);
return ret;
}
static int proc_allowed_congestion_control(ctl_table *ctl,
- int write, struct file * filp,
+ int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
return -ENOMEM;
tcp_get_allowed_congestion_control(tbl.data, tbl.maxlen);
- ret = proc_dostring(&tbl, write, filp, buffer, lenp, ppos);
+ ret = proc_dostring(&tbl, write, buffer, lenp, ppos);
if (write && ret == 0)
ret = tcp_set_allowed_congestion_control(tbl.data);
kfree(tbl.data);
EXPORT_SYMBOL(tcp_enter_memory_pressure);
+/* Convert seconds to retransmits based on initial and max timeout */
+static u8 secs_to_retrans(int seconds, int timeout, int rto_max)
+{
+ u8 res = 0;
+
+ if (seconds > 0) {
+ int period = timeout;
+
+ res = 1;
+ while (seconds > period && res < 255) {
+ res++;
+ timeout <<= 1;
+ if (timeout > rto_max)
+ timeout = rto_max;
+ period += timeout;
+ }
+ }
+ return res;
+}
+
+/* Convert retransmits to seconds based on initial and max timeout */
+static int retrans_to_secs(u8 retrans, int timeout, int rto_max)
+{
+ int period = 0;
+
+ if (retrans > 0) {
+ period = timeout;
+ while (--retrans) {
+ timeout <<= 1;
+ if (timeout > rto_max)
+ timeout = rto_max;
+ period += timeout;
+ }
+ }
+ return period;
+}
+
/*
* Wait for a TCP event.
*
lock_sock(sk);
- timeo = sock_rcvtimeo(sk, flags & SPLICE_F_NONBLOCK);
+ timeo = sock_rcvtimeo(sk, sock->file->f_flags & O_NONBLOCK);
while (tss.len) {
ret = __tcp_splice_read(sk, &tss);
if (ret < 0)
goto found_ok_skb;
if (tcp_hdr(skb)->fin)
goto found_fin_ok;
- WARN_ON(!(flags & MSG_PEEK));
+ WARN(!(flags & MSG_PEEK), KERN_INFO "recvmsg bug 2: "
+ "copied %X seq %X\n", *seq,
+ TCP_SKB_CB(skb)->seq);
}
/* Well, if we have backlog, try to process it now yet. */
* Socket option code for TCP.
*/
static int do_tcp_setsockopt(struct sock *sk, int level,
- int optname, char __user *optval, int optlen)
+ int optname, char __user *optval, unsigned int optlen)
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
return -EINVAL;
val = strncpy_from_user(name, optval,
- min(TCP_CA_NAME_MAX-1, optlen));
+ min_t(long, TCP_CA_NAME_MAX-1, optlen));
if (val < 0)
return -EFAULT;
name[val] = 0;
break;
case TCP_DEFER_ACCEPT:
- icsk->icsk_accept_queue.rskq_defer_accept = 0;
- if (val > 0) {
- /* Translate value in seconds to number of
- * retransmits */
- while (icsk->icsk_accept_queue.rskq_defer_accept < 32 &&
- val > ((TCP_TIMEOUT_INIT / HZ) <<
- icsk->icsk_accept_queue.rskq_defer_accept))
- icsk->icsk_accept_queue.rskq_defer_accept++;
- icsk->icsk_accept_queue.rskq_defer_accept++;
- }
+ /* Translate value in seconds to number of retransmits */
+ icsk->icsk_accept_queue.rskq_defer_accept =
+ secs_to_retrans(val, TCP_TIMEOUT_INIT / HZ,
+ TCP_RTO_MAX / HZ);
break;
case TCP_WINDOW_CLAMP:
}
int tcp_setsockopt(struct sock *sk, int level, int optname, char __user *optval,
- int optlen)
+ unsigned int optlen)
{
struct inet_connection_sock *icsk = inet_csk(sk);
#ifdef CONFIG_COMPAT
int compat_tcp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level != SOL_TCP)
return inet_csk_compat_setsockopt(sk, level, optname,
val = (val ? : sysctl_tcp_fin_timeout) / HZ;
break;
case TCP_DEFER_ACCEPT:
- val = !icsk->icsk_accept_queue.rskq_defer_accept ? 0 :
- ((TCP_TIMEOUT_INIT / HZ) << (icsk->icsk_accept_queue.rskq_defer_accept - 1));
+ val = retrans_to_secs(icsk->icsk_accept_queue.rskq_defer_accept,
+ TCP_TIMEOUT_INIT / HZ, TCP_RTO_MAX / HZ);
break;
case TCP_WINDOW_CLAMP:
val = tp->window_clamp;
if (!(flg & TCP_FLAG_ACK))
return NULL;
- /* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
- if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
+ /* While TCP_DEFER_ACCEPT is active, drop bare ACK. */
+ if (req->retrans < inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
inet_rsk(req)->acked = 1;
return NULL;
#define OPTION_SACK_ADVERTISE (1 << 0)
#define OPTION_TS (1 << 1)
#define OPTION_MD5 (1 << 2)
+#define OPTION_WSCALE (1 << 3)
struct tcp_out_options {
u8 options; /* bit field of OPTION_* */
TCPOLEN_SACK_PERM);
}
- if (unlikely(opts->ws)) {
+ if (unlikely(OPTION_WSCALE & opts->options)) {
*ptr++ = htonl((TCPOPT_NOP << 24) |
(TCPOPT_WINDOW << 16) |
(TCPOLEN_WINDOW << 8) |
}
if (likely(sysctl_tcp_window_scaling)) {
opts->ws = tp->rx_opt.rcv_wscale;
- if (likely(opts->ws))
- size += TCPOLEN_WSCALE_ALIGNED;
+ opts->options |= OPTION_WSCALE;
+ size += TCPOLEN_WSCALE_ALIGNED;
}
if (likely(sysctl_tcp_sack)) {
opts->options |= OPTION_SACK_ADVERTISE;
if (likely(ireq->wscale_ok)) {
opts->ws = ireq->rcv_wscale;
- if (likely(opts->ws))
- size += TCPOLEN_WSCALE_ALIGNED;
+ opts->options |= OPTION_WSCALE;
+ size += TCPOLEN_WSCALE_ALIGNED;
}
if (likely(doing_ts)) {
opts->options |= OPTION_TS;
if (rt == NULL) {
struct flowi fl = { .oif = ipc.oif,
+ .mark = sk->sk_mark,
.nl_u = { .ip4_u =
{ .daddr = faddr,
.saddr = saddr,
return ret;
}
+
+/**
+ * first_packet_length - return length of first packet in receive queue
+ * @sk: socket
+ *
+ * Drops all bad checksum frames, until a valid one is found.
+ * Returns the length of found skb, or 0 if none is found.
+ */
+static unsigned int first_packet_length(struct sock *sk)
+{
+ struct sk_buff_head list_kill, *rcvq = &sk->sk_receive_queue;
+ struct sk_buff *skb;
+ unsigned int res;
+
+ __skb_queue_head_init(&list_kill);
+
+ spin_lock_bh(&rcvq->lock);
+ while ((skb = skb_peek(rcvq)) != NULL &&
+ udp_lib_checksum_complete(skb)) {
+ UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS,
+ IS_UDPLITE(sk));
+ __skb_unlink(skb, rcvq);
+ __skb_queue_tail(&list_kill, skb);
+ }
+ res = skb ? skb->len : 0;
+ spin_unlock_bh(&rcvq->lock);
+
+ if (!skb_queue_empty(&list_kill)) {
+ lock_sock(sk);
+ __skb_queue_purge(&list_kill);
+ sk_mem_reclaim_partial(sk);
+ release_sock(sk);
+ }
+ return res;
+}
+
/*
* IOCTL requests applicable to the UDP protocol
*/
case SIOCINQ:
{
- struct sk_buff *skb;
- unsigned long amount;
+ unsigned int amount = first_packet_length(sk);
- amount = 0;
- spin_lock_bh(&sk->sk_receive_queue.lock);
- skb = skb_peek(&sk->sk_receive_queue);
- if (skb != NULL) {
+ if (amount)
/*
* We will only return the amount
* of this packet since that is all
* that will be read.
*/
- amount = skb->len - sizeof(struct udphdr);
- }
- spin_unlock_bh(&sk->sk_receive_queue.lock);
+ amount -= sizeof(struct udphdr);
+
return put_user(amount, (int __user *)arg);
}
err = ulen;
out_free:
- lock_sock(sk);
- skb_free_datagram(sk, skb);
- release_sock(sk);
+ skb_free_datagram_locked(sk, skb);
out:
return err;
* Socket option code for UDP
*/
int udp_lib_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen,
+ char __user *optval, unsigned int optlen,
int (*push_pending_frames)(struct sock *))
{
struct udp_sock *up = udp_sk(sk);
EXPORT_SYMBOL(udp_lib_setsockopt);
int udp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level == SOL_UDP || level == SOL_UDPLITE)
return udp_lib_setsockopt(sk, level, optname, optval, optlen,
#ifdef CONFIG_COMPAT
int compat_udp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level == SOL_UDP || level == SOL_UDPLITE)
return udp_lib_setsockopt(sk, level, optname, optval, optlen,
{
unsigned int mask = datagram_poll(file, sock, wait);
struct sock *sk = sock->sk;
- int is_lite = IS_UDPLITE(sk);
/* Check for false positives due to checksum errors */
- if ((mask & POLLRDNORM) &&
- !(file->f_flags & O_NONBLOCK) &&
- !(sk->sk_shutdown & RCV_SHUTDOWN)) {
- struct sk_buff_head *rcvq = &sk->sk_receive_queue;
- struct sk_buff *skb;
-
- spin_lock_bh(&rcvq->lock);
- while ((skb = skb_peek(rcvq)) != NULL &&
- udp_lib_checksum_complete(skb)) {
- UDP_INC_STATS_BH(sock_net(sk),
- UDP_MIB_INERRORS, is_lite);
- __skb_unlink(skb, rcvq);
- kfree_skb(skb);
- }
- spin_unlock_bh(&rcvq->lock);
-
- /* nothing to see, move along */
- if (skb == NULL)
- mask &= ~(POLLIN | POLLRDNORM);
- }
+ if ((mask & POLLRDNORM) && !(file->f_flags & O_NONBLOCK) &&
+ !(sk->sk_shutdown & RCV_SHUTDOWN) && !first_packet_length(sk))
+ mask &= ~(POLLIN | POLLRDNORM);
return mask;
extern int udp_v4_get_port(struct sock *sk, unsigned short snum);
extern int udp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
extern int udp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
#ifdef CONFIG_COMPAT
extern int compat_udp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
extern int compat_udp_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
#endif
#ifdef CONFIG_SYSCTL
static
-int addrconf_sysctl_forward(ctl_table *ctl, int write, struct file * filp,
+int addrconf_sysctl_forward(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
int ret;
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write)
ret = addrconf_fixup_forwarding(ctl, valp, val);
}
static
-int addrconf_sysctl_disable(ctl_table *ctl, int write, struct file * filp,
+int addrconf_sysctl_disable(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = ctl->data;
int val = *valp;
int ret;
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
if (write)
ret = addrconf_disable_ipv6(ctl, valp, val);
struct net_device_stats *stats = &t->dev->stats;
int ret;
- if (t->recursion++) {
- stats->collisions++;
- goto tx_err;
- }
-
switch (skb->protocol) {
case htons(ETH_P_IP):
ret = ip4ip6_tnl_xmit(skb, dev);
if (ret < 0)
goto tx_err;
- t->recursion--;
return NETDEV_TX_OK;
tx_err:
stats->tx_errors++;
stats->tx_dropped++;
kfree_skb(skb);
- t->recursion--;
return NETDEV_TX_OK;
}
* MOSPF/PIM router set up we can clean this up.
*/
-int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, int optlen)
+int ip6_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsigned int optlen)
{
int ret;
struct mif6ctl vif;
}
static int do_ipv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct net *net = sock_net(sk);
goto e_inval;
if (val) {
+ struct net_device *dev;
+
if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != val)
goto e_inval;
- if (__dev_get_by_index(net, val) == NULL) {
+ dev = dev_get_by_index(net, val);
+ if (!dev) {
retv = -ENODEV;
break;
}
+ dev_put(dev);
}
np->mcast_oif = val;
retv = 0;
}
int ipv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
int err;
#ifdef CONFIG_COMPAT
int compat_ipv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
int err;
&icmp6h, NULL,
send_sllao ? ND_OPT_SOURCE_LL_ADDR : 0);
}
-EXPORT_SYMBOL(ndisc_send_rs);
static void ndisc_error_report(struct neighbour *neigh, struct sk_buff *skb)
}
}
-int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, struct file * filp, void __user *buffer, size_t *lenp, loff_t *ppos)
+int ndisc_ifinfo_sysctl_change(struct ctl_table *ctl, int write, void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct net_device *dev = ctl->extra1;
struct inet6_dev *idev;
ndisc_warn_deprecated_sysctl(ctl, "syscall", dev ? dev->name : "default");
if (strcmp(ctl->procname, "retrans_time") == 0)
- ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(ctl, write, buffer, lenp, ppos);
else if (strcmp(ctl->procname, "base_reachable_time") == 0)
ret = proc_dointvec_jiffies(ctl, write,
- filp, buffer, lenp, ppos);
+ buffer, lenp, ppos);
else if ((strcmp(ctl->procname, "retrans_time_ms") == 0) ||
(strcmp(ctl->procname, "base_reachable_time_ms") == 0))
ret = proc_dointvec_ms_jiffies(ctl, write,
- filp, buffer, lenp, ppos);
+ buffer, lenp, ppos);
else
ret = -1;
static int do_rawv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct raw6_sock *rp = raw6_sk(sk);
int val;
}
static int rawv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
switch(level) {
case SOL_RAW:
#ifdef CONFIG_COMPAT
static int compat_rawv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
switch (level) {
case SOL_RAW:
#ifdef CONFIG_SYSCTL
static
-int ipv6_sysctl_rtcache_flush(ctl_table *ctl, int write, struct file * filp,
+int ipv6_sysctl_rtcache_flush(ctl_table *ctl, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
struct net *net = current->nsproxy->net_ns;
int delay = net->ipv6.sysctl.flush_delay;
if (write) {
- proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
+ proc_dointvec(ctl, write, buffer, lenp, ppos);
fib6_run_gc(delay <= 0 ? ~0UL : (unsigned long)delay, net);
return 0;
} else
* Roger Venning <r.venning@telstra.com>: 6to4 support
* Nate Thompson <nate@thebog.net>: 6to4 support
* Fred Templin <fred.l.templin@boeing.com>: isatap support
- * Sascha Hlusiak <mail@saschahlusiak.de>: stateless autoconf for isatap
*/
#include <linux/module.h>
return NULL;
}
-static void ipip6_tunnel_rs_timer(unsigned long data)
-{
- struct ip_tunnel_prl_entry *p = (struct ip_tunnel_prl_entry *) data;
- struct inet6_dev *ifp;
- struct inet6_ifaddr *addr;
-
- spin_lock(&p->lock);
- ifp = __in6_dev_get(p->tunnel->dev);
-
- read_lock_bh(&ifp->lock);
- for (addr = ifp->addr_list; addr; addr = addr->if_next) {
- struct in6_addr rtr;
-
- if (!(ipv6_addr_type(&addr->addr) & IPV6_ADDR_LINKLOCAL))
- continue;
-
- /* Send RS to guessed linklocal address of router
- *
- * Better: send to ff02::2 encapsuled in unicast directly
- * to router-v4 instead of guessing the v6 address.
- *
- * Cisco/Windows seem to not set the u/l bit correctly,
- * so we won't guess right.
- */
- ipv6_addr_set(&rtr, htonl(0xFE800000), 0, 0, 0);
- if (!__ipv6_isatap_ifid(rtr.s6_addr + 8,
- p->addr)) {
- ndisc_send_rs(p->tunnel->dev, &addr->addr, &rtr);
- }
- }
- read_unlock_bh(&ifp->lock);
-
- mod_timer(&p->rs_timer, jiffies + HZ * p->rs_delay);
- spin_unlock(&p->lock);
-
- return;
-}
-
static struct ip_tunnel_prl_entry *
__ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr)
{
c = 0;
for (prl = t->prl; prl; prl = prl->next) {
- if (c > cmax)
+ if (c >= cmax)
break;
if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr)
continue;
kp[c].addr = prl->addr;
kp[c].flags = prl->flags;
- kp[c].rs_delay = prl->rs_delay;
c++;
if (kprl.addr != htonl(INADDR_ANY))
break;
}
p->next = t->prl;
- p->tunnel = t;
t->prl = p;
t->prl_count++;
-
- spin_lock_init(&p->lock);
- setup_timer(&p->rs_timer, ipip6_tunnel_rs_timer, (unsigned long) p);
update:
p->addr = a->addr;
p->flags = a->flags;
- p->rs_delay = a->rs_delay;
- if (p->rs_delay == 0)
- p->rs_delay = IPTUNNEL_RS_DEFAULT_DELAY;
- spin_lock(&p->lock);
- del_timer(&p->rs_timer);
- if (p->flags & PRL_DEFAULT)
- mod_timer(&p->rs_timer, jiffies + 1);
- spin_unlock(&p->lock);
out:
write_unlock(&ipip6_lock);
return err;
if ((*p)->addr == a->addr) {
x = *p;
*p = x->next;
- spin_lock(&x->lock);
- del_timer(&x->rs_timer);
- spin_unlock(&x->lock);
kfree(x);
t->prl_count--;
goto out;
while (t->prl) {
x = t->prl;
t->prl = t->prl->next;
- spin_lock(&x->lock);
- del_timer(&x->rs_timer);
- spin_unlock(&x->lock);
kfree(x);
t->prl_count--;
}
struct in6_addr *addr6;
int addr_type;
- if (tunnel->recursion++) {
- stats->collisions++;
- goto tx_error;
- }
-
if (skb->protocol != htons(ETH_P_IPV6))
goto tx_error;
ip_rt_put(rt);
stats->tx_dropped++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
if (skb->sk)
nf_reset(skb);
IPTUNNEL_XMIT();
- tunnel->recursion--;
return NETDEV_TX_OK;
tx_error_icmp:
tx_error:
stats->tx_errors++;
dev_kfree_skb(skb);
- tunnel->recursion--;
return NETDEV_TX_OK;
}
err = ulen;
out_free:
- lock_sock(sk);
- skb_free_datagram(sk, skb);
- release_sock(sk);
+ skb_free_datagram_locked(sk, skb);
out:
return err;
* Socket option code for UDP
*/
int udpv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level == SOL_UDP || level == SOL_UDPLITE)
return udp_lib_setsockopt(sk, level, optname, optval, optlen,
#ifdef CONFIG_COMPAT
int compat_udpv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
if (level == SOL_UDP || level == SOL_UDPLITE)
return udp_lib_setsockopt(sk, level, optname, optval, optlen,
extern int udpv6_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
extern int udpv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
#ifdef CONFIG_COMPAT
extern int compat_udpv6_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen);
+ char __user *optval, unsigned int optlen);
extern int compat_udpv6_getsockopt(struct sock *sk, int level, int optname,
char __user *optval, int __user *optlen);
#endif
* socket object. */
static int ipx_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
int opt;
*
*/
static int irda_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct irda_sock *self = irda_sk(sk);
********************************************************************/
#include <linux/init.h>
+#include <linux/sched.h>
#include <net/irda/irda.h>
#include <net/irda/irlmp.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/proc_fs.h>
+#include <linux/sched.h>
#include <linux/seq_file.h>
#include <linux/random.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/if_arp.h>
#include <linux/module.h>
+#include <linux/sched.h>
#include <net/arp.h>
#include <net/irda/irda.h>
*/
#include "irnet_irda.h" /* Private header */
+#include <linux/sched.h>
#include <linux/seq_file.h>
#include <asm/unaligned.h>
* 2) as a control channel (write commands, read events)
*/
+#include <linux/sched.h>
#include <linux/smp_lock.h>
#include "irnet_ppp.h" /* Private header */
/* Please put other headers in irnet.h - Thanks */
/* For other sysctl, I've no idea of the range. Maybe Dag could help
* us on that - Jean II */
-static int do_devname(ctl_table *table, int write, struct file *filp,
+static int do_devname(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_dostring(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dostring(table, write, buffer, lenp, ppos);
if (ret == 0 && write) {
struct ias_value *val;
}
-static int do_discovery(ctl_table *table, int write, struct file *filp,
+static int do_discovery(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
if (ret)
return ret;
/* getsockopt and setsockopt */
static int iucv_sock_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct iucv_sock *iucv = iucv_sk(sk);
* Set various connection specific parameters.
*/
static int llc_ui_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct llc_sock *llc = llc_sk(sk);
state = &sta->ampdu_mlme.tid_state_tx[tid];
+ del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
+
spin_lock_bh(&sta->lock);
- if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
- spin_unlock_bh(&sta->lock);
- return;
- }
+ if (!(*state & HT_ADDBA_REQUESTED_MSK))
+ goto timer_still_needed;
if (mgmt->u.action.u.addba_resp.dialog_token !=
sta->ampdu_mlme.tid_tx[tid]->dialog_token) {
- spin_unlock_bh(&sta->lock);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "wrong addBA response token, tid %d\n", tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
- return;
+ goto timer_still_needed;
}
- del_timer_sync(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "switched off addBA timer for tid %d \n", tid);
#endif /* CONFIG_MAC80211_HT_DEBUG */
+
if (le16_to_cpu(mgmt->u.action.u.addba_resp.status)
== WLAN_STATUS_SUCCESS) {
u8 curstate = *state;
} else {
___ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR);
}
+
+ goto out;
+
+ timer_still_needed:
+ add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
+ out:
spin_unlock_bh(&sta->lock);
}
struct ieee80211_sub_if_data *sdata;
int ret;
+ if (netif_running(dev))
+ return -EBUSY;
+
if (!nl80211_type_check(type))
return -EINVAL;
if (ret)
return ret;
- if (netif_running(sdata->dev))
- return -EBUSY;
-
if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
ieee80211_sdata_set_mesh_id(sdata,
params->mesh_id_len,
if (net_ratelimit())
printk(KERN_DEBUG "delba from %pM (%s) tid %d reason code %d\n",
mgmt->sa, initiator ? "initiator" : "recipient", tid,
- mgmt->u.action.u.delba.reason_code);
+ le16_to_cpu(mgmt->u.action.u.delba.reason_code));
#endif /* CONFIG_MAC80211_HT_DEBUG */
if (initiator == WLAN_BACK_INITIATOR)
struct ieee80211_mgmt *mgmt;
u8 *pos;
struct ieee80211_supported_band *sband;
+ struct cfg80211_bss *bss;
u32 bss_change;
u8 supp_rates[IEEE80211_MAX_SUPP_RATES];
mod_timer(&ifibss->timer,
round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL));
- cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel,
- mgmt, skb->len, 0, GFP_KERNEL);
+ bss = cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel,
+ mgmt, skb->len, 0, GFP_KERNEL);
+ cfg80211_put_bss(bss);
cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL);
}
WLAN_CAPABILITY_PRIVACY,
capability);
+ if (bss) {
#ifdef CONFIG_MAC80211_IBSS_DEBUG
- if (bss)
printk(KERN_DEBUG " sta_find_ibss: selected %pM current "
"%pM\n", bss->cbss.bssid, ifibss->bssid);
#endif /* CONFIG_MAC80211_IBSS_DEBUG */
- if (bss && memcmp(ifibss->bssid, bss->cbss.bssid, ETH_ALEN)) {
printk(KERN_DEBUG "%s: Selected IBSS BSSID %pM"
" based on configured SSID\n",
sdata->dev->name, bss->cbss.bssid);
ieee80211_sta_join_ibss(sdata, bss);
ieee80211_rx_bss_put(local, bss);
return;
- } else if (bss)
- ieee80211_rx_bss_put(local, bss);
+ }
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG " did not try to join ibss\n");
if (!sdata->u.ibss.ssid_len)
continue;
sdata->u.ibss.last_scan_completed = jiffies;
- ieee80211_sta_find_ibss(sdata);
+ mod_timer(&sdata->u.ibss.timer, 0);
}
mutex_unlock(&local->iflist_mtx);
}
* @hwmp_ie: hwmp information element (PREP or PREQ)
*
* This function updates the path routing information to the originator and the
- * transmitter of a HWMP PREQ or PREP fram.
+ * transmitter of a HWMP PREQ or PREP frame.
*
* Returns: metric to frame originator or 0 if the frame should not be further
* processed
reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
- printk(KERN_DEBUG "%s: disassociated (Reason: %u)\n",
- sdata->dev->name, reason_code);
+ printk(KERN_DEBUG "%s: disassociated from %pM (Reason: %u)\n",
+ sdata->dev->name, mgmt->sa, reason_code);
ieee80211_set_disassoc(sdata, false);
return RX_MGMT_CFG80211_DISASSOC;
if (status_code != WLAN_STATUS_SUCCESS) {
printk(KERN_DEBUG "%s: AP denied association (code=%d)\n",
sdata->dev->name, status_code);
- list_del(&wk->list);
- kfree(wk);
+ wk->state = IEEE80211_MGD_STATE_IDLE;
return RX_MGMT_CFG80211_ASSOC;
}
/* direct probe may be part of the association flow */
if (wk && wk->state == IEEE80211_MGD_STATE_PROBE) {
- printk(KERN_DEBUG "%s direct probe responded\n",
+ printk(KERN_DEBUG "%s: direct probe responded\n",
sdata->dev->name);
wk->tries = 0;
wk->state = IEEE80211_MGD_STATE_AUTH;
struct ieee80211_mgd_work *wk;
const u8 *bssid = NULL;
- printk(KERN_DEBUG "%s: deauthenticating by local choice (reason=%d)\n",
- sdata->dev->name, req->reason_code);
-
mutex_lock(&ifmgd->mtx);
if (ifmgd->associated && &ifmgd->associated->cbss == req->bss) {
mutex_unlock(&ifmgd->mtx);
+ printk(KERN_DEBUG "%s: deauthenticating from %pM by local choice (reason=%d)\n",
+ sdata->dev->name, bssid, req->reason_code);
+
ieee80211_send_deauth_disassoc(sdata, bssid,
IEEE80211_STYPE_DEAUTH, req->reason_code,
cookie);
{
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
- printk(KERN_DEBUG "%s: disassociating by local choice (reason=%d)\n",
- sdata->dev->name, req->reason_code);
-
mutex_lock(&ifmgd->mtx);
/*
return -ENOLINK;
}
+ printk(KERN_DEBUG "%s: disassociating from %pM by local choice (reason=%d)\n",
+ sdata->dev->name, req->bss->bssid, req->reason_code);
+
ieee80211_set_disassoc(sdata, false);
mutex_unlock(&ifmgd->mtx);
* published by the Free Software Foundation.
*/
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/poll.h>
#include <linux/netdevice.h>
skb = rx.skb;
- list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+ if (rx.sdata && ieee80211_is_data(hdr->frame_control)) {
+ rx.flags |= IEEE80211_RX_RA_MATCH;
+ prepares = prepare_for_handlers(rx.sdata, &rx, hdr);
+ if (prepares)
+ prev = rx.sdata;
+ } else list_for_each_entry_rcu(sdata, &local->interfaces, list) {
if (!netif_running(sdata->dev))
continue;
- if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
+ if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
continue;
rx.flags |= IEEE80211_RX_RA_MATCH;
struct ieee80211_supported_band *sband;
struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
+ WARN_ON_ONCE(softirq_count() == 0);
+
if (WARN_ON(status->band < 0 ||
status->band >= IEEE80211_NUM_BANDS))
goto drop;
bss->dtim_period = tim_ie->dtim_period;
}
- /* set default value for buggy APs */
- if (!elems->tim || bss->dtim_period == 0)
+ /* set default value for buggy AP/no TIM element */
+ if (bss->dtim_period == 0)
bss->dtim_period = 1;
bss->supp_rates_len = 0;
u.ap);
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, &sta->sta);
+ sdata = sta->sdata;
}
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
&(*sta)->sta);
+ sdata = (*sta)->sdata;
}
if (ieee80211_vif_is_mesh(&sdata->vif)) {
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data;
u32 staflags;
- if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)))
+ if (unlikely(!sta || ieee80211_is_probe_resp(hdr->frame_control)
+ || ieee80211_is_auth(hdr->frame_control)
+ || ieee80211_is_assoc_resp(hdr->frame_control)
+ || ieee80211_is_reassoc_resp(hdr->frame_control)))
return TX_CONTINUE;
staflags = get_sta_flags(sta);
if (tmp_sdata->vif.type != NL80211_IFTYPE_AP)
continue;
if (compare_ether_addr(tmp_sdata->dev->dev_addr,
- hdr->addr2)) {
+ hdr->addr2) == 0) {
dev_hold(tmp_sdata->dev);
dev_put(sdata->dev);
sdata = tmp_sdata;
if (!is_multicast_ether_addr(hdr.addr1)) {
rcu_read_lock();
sta = sta_info_get(local, hdr.addr1);
- if (sta)
+ /* XXX: in the future, use sdata to look up the sta */
+ if (sta && sta->sdata == sdata)
sta_flags = get_sta_flags(sta);
rcu_read_unlock();
}
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (WARN_ON(!info->control.vif)) {
- kfree(skb);
+ kfree_skb(skb);
return;
}
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
if (WARN_ON(!info->control.vif)) {
- kfree(skb);
+ kfree_skb(skb);
continue;
}
static int
-proc_do_defense_mode(ctl_table *table, int write, struct file * filp,
+proc_do_defense_mode(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = table->data;
int val = *valp;
int rc;
- rc = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ rc = proc_dointvec(table, write, buffer, lenp, ppos);
if (write && (*valp != val)) {
if ((*valp < 0) || (*valp > 3)) {
/* Restore the correct value */
static int
-proc_do_sync_threshold(ctl_table *table, int write, struct file *filp,
+proc_do_sync_threshold(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int *valp = table->data;
/* backup the value first */
memcpy(val, valp, sizeof(val));
- rc = proc_dointvec(table, write, filp, buffer, lenp, ppos);
+ rc = proc_dointvec(table, write, buffer, lenp, ppos);
if (write && (valp[0] < 0 || valp[1] < 0 || valp[0] >= valp[1])) {
/* Restore the correct value */
memcpy(valp, val, sizeof(val));
#include <linux/types.h>
#include <linux/netfilter.h>
#include <linux/module.h>
+#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/proc_fs.h>
#include <linux/vmalloc.h>
static struct ctl_table nf_log_sysctl_table[NFPROTO_NUMPROTO+1];
static struct ctl_table_header *nf_log_dir_header;
-static int nf_log_proc_dostring(ctl_table *table, int write, struct file *filp,
+static int nf_log_proc_dostring(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
const struct nf_logger *logger;
table->data = "NONE";
else
table->data = logger->name;
- r = proc_dostring(table, write, filp, buffer, lenp, ppos);
+ r = proc_dostring(table, write, buffer, lenp, ppos);
mutex_unlock(&nf_log_mutex);
}
}
int nf_setsockopt(struct sock *sk, u_int8_t pf, int val, char __user *opt,
- int len)
+ unsigned int len)
{
return nf_sockopt(sk, pf, val, opt, &len, 0);
}
}
int compat_nf_setsockopt(struct sock *sk, u_int8_t pf,
- int val, char __user *opt, int len)
+ int val, char __user *opt, unsigned int len)
{
return compat_nf_sockopt(sk, pf, val, opt, &len, 0);
}
}
static int netlink_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct netlink_sock *nlk = nlk_sk(sk);
return err;
}
+void __netlink_clear_multicast_users(struct sock *ksk, unsigned int group)
+{
+ struct sock *sk;
+ struct hlist_node *node;
+ struct netlink_table *tbl = &nl_table[ksk->sk_protocol];
+
+ sk_for_each_bound(sk, node, &tbl->mc_list)
+ netlink_update_socket_mc(nlk_sk(sk), group, 0);
+}
+
/**
* netlink_clear_multicast_users - kick off multicast listeners
*
*/
void netlink_clear_multicast_users(struct sock *ksk, unsigned int group)
{
- struct sock *sk;
- struct hlist_node *node;
- struct netlink_table *tbl = &nl_table[ksk->sk_protocol];
-
netlink_table_grab();
-
- sk_for_each_bound(sk, node, &tbl->mc_list)
- netlink_update_socket_mc(nlk_sk(sk), group, 0);
-
+ __netlink_clear_multicast_users(ksk, group);
netlink_table_ungrab();
}
}
rep = __nlmsg_put(skb, NETLINK_CB(in_skb).pid, nlh->nlmsg_seq,
- NLMSG_ERROR, sizeof(struct nlmsgerr), 0);
+ NLMSG_ERROR, payload, 0);
errmsg = nlmsg_data(rep);
errmsg->error = err;
memcpy(&errmsg->msg, nlh, err ? nlh->nlmsg_len : sizeof(*nlh));
struct net *net;
BUG_ON(grp->family != family);
+ netlink_table_grab();
rcu_read_lock();
for_each_net_rcu(net)
- netlink_clear_multicast_users(net->genl_sock, grp->id);
+ __netlink_clear_multicast_users(net->genl_sock, grp->id);
rcu_read_unlock();
+ netlink_table_ungrab();
clear_bit(grp->id, mc_groups);
list_del(&grp->list);
*/
static int nr_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct nr_sock *nr = nr_sk(sk);
goto out_put;
size_max = po->tx_ring.frame_size
- - sizeof(struct skb_shared_info)
- - po->tp_hdrlen
- - LL_ALLOCATED_SPACE(dev)
- - sizeof(struct sockaddr_ll);
+ - (po->tp_hdrlen - sizeof(struct sockaddr_ll));
if (size_max > dev->mtu + reserve)
size_max = dev->mtu + reserve;
}
static int
-packet_setsockopt(struct socket *sock, int level, int optname, char __user *optval, int optlen)
+packet_setsockopt(struct socket *sock, int level, int optname, char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct packet_sock *po = pkt_sk(sk);
atomic_dec(&pkt_sk(sk)->mapped);
}
-static struct vm_operations_struct packet_mmap_ops = {
+static const struct vm_operations_struct packet_mmap_ops = {
.open = packet_mm_open,
.close = packet_mm_close,
};
goto drop;
}
+ /* Broadcast sending is not implemented */
+ if (pn_addr(dst) == PNADDR_BROADCAST) {
+ err = -EOPNOTSUPP;
+ goto drop;
+ }
+
skb_reset_transport_header(skb);
WARN_ON(skb_headroom(skb) & 1); /* HW assumes word alignment */
skb_push(skb, sizeof(struct phonethdr));
}
static int pep_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct pep_sock *pn = pep_sk(sk);
int val = 0, err = 0;
}
EXPORT_SYMBOL(pn_sock_unhash);
+static DEFINE_MUTEX(port_mutex);
+
static int pn_socket_bind(struct socket *sock, struct sockaddr *addr, int len)
{
struct sock *sk = sock->sk;
err = -EINVAL; /* attempt to rebind */
goto out;
}
+ WARN_ON(sk_hashed(sk));
+ mutex_lock(&port_mutex);
err = sk->sk_prot->get_port(sk, pn_port(handle));
if (err)
- goto out;
+ goto out_port;
/* get_port() sets the port, bind() sets the address if applicable */
pn->sobject = pn_object(saddr, pn_port(pn->sobject));
/* Enable RX on the socket */
sk->sk_prot->hash(sk);
+out_port:
+ mutex_unlock(&port_mutex);
out:
release_sock(sk);
return err;
};
EXPORT_SYMBOL(phonet_stream_ops);
-static DEFINE_MUTEX(port_mutex);
-
/* allocate port for a socket */
int pn_sock_get_port(struct sock *sk, unsigned short sport)
{
memset(&try_sa, 0, sizeof(struct sockaddr_pn));
try_sa.spn_family = AF_PHONET;
-
- mutex_lock(&port_mutex);
-
+ WARN_ON(!mutex_is_locked(&port_mutex));
if (!sport) {
/* search free port */
int port, pmin, pmax;
else
sock_put(tmpsk);
}
- mutex_unlock(&port_mutex);
-
/* the port must be in use already */
return -EADDRINUSE;
found:
- mutex_unlock(&port_mutex);
pn->sobject = pn_object(pn_addr(pn->sobject), sport);
return 0;
}
} while (read_seqretry(&local_port_range_lock, seq));
}
-static int proc_local_port_range(ctl_table *table, int write, struct file *filp,
+static int proc_local_port_range(ctl_table *table, int write,
void __user *buffer,
size_t *lenp, loff_t *ppos)
{
.extra2 = &local_port_range_max,
};
- ret = proc_dointvec_minmax(&tmp, write, filp, buffer, lenp, ppos);
+ ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
if (write && ret == 0) {
if (range[1] < range[0])
}
static int rds_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct rds_sock *rs = rds_sk_to_rs(sock->sk);
int ret;
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/rfkill.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/miscdevice.h>
#include <linux/wait.h>
*/
static int rose_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sock *sk = sock->sk;
struct rose_sock *rose = rose_sk(sk);
* set RxRPC socket options
*/
static int rxrpc_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct rxrpc_sock *rx = rxrpc_sk(sock->sk);
unsigned min_sec_level;
};
static const struct nla_policy pedit_policy[TCA_PEDIT_MAX + 1] = {
- [TCA_PEDIT_PARMS] = { .len = sizeof(struct tcf_pedit) },
+ [TCA_PEDIT_PARMS] = { .len = sizeof(struct tc_pedit) },
};
static int tcf_pedit_init(struct nlattr *nla, struct nlattr *est,
tcm = NLMSG_DATA(nlh);
tcm->tcm_family = AF_UNSPEC;
tcm->tcm__pad1 = 0;
- tcm->tcm__pad1 = 0;
+ tcm->tcm__pad2 = 0;
tcm->tcm_ifindex = qdisc_dev(tp->q)->ifindex;
tcm->tcm_parent = tp->classid;
tcm->tcm_info = TC_H_MAKE(tp->prio, tp->protocol);
* instead a error will be indicated to the user.
*/
static int sctp_setsockopt_disable_fragments(struct sock *sk,
- char __user *optval, int optlen)
+ char __user *optval,
+ unsigned int optlen)
{
int val;
}
static int sctp_setsockopt_events(struct sock *sk, char __user *optval,
- int optlen)
+ unsigned int optlen)
{
if (optlen > sizeof(struct sctp_event_subscribe))
return -EINVAL;
* association is closed.
*/
static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval,
- int optlen)
+ unsigned int optlen)
{
struct sctp_sock *sp = sctp_sk(sk);
}
static int sctp_setsockopt_peer_addr_params(struct sock *sk,
- char __user *optval, int optlen)
+ char __user *optval,
+ unsigned int optlen)
{
struct sctp_paddrparams params;
struct sctp_transport *trans = NULL;
*/
static int sctp_setsockopt_delayed_ack(struct sock *sk,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
struct sctp_sack_info params;
struct sctp_transport *trans = NULL;
* by the change). With TCP-style sockets, this option is inherited by
* sockets derived from a listener socket.
*/
-static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, int optlen)
+static int sctp_setsockopt_initmsg(struct sock *sk, char __user *optval, unsigned int optlen)
{
struct sctp_initmsg sinit;
struct sctp_sock *sp = sctp_sk(sk);
* to this call if the caller is using the UDP model.
*/
static int sctp_setsockopt_default_send_param(struct sock *sk,
- char __user *optval, int optlen)
+ char __user *optval,
+ unsigned int optlen)
{
struct sctp_sndrcvinfo info;
struct sctp_association *asoc;
* association peer's addresses.
*/
static int sctp_setsockopt_primary_addr(struct sock *sk, char __user *optval,
- int optlen)
+ unsigned int optlen)
{
struct sctp_prim prim;
struct sctp_transport *trans;
* integer boolean flag.
*/
static int sctp_setsockopt_nodelay(struct sock *sk, char __user *optval,
- int optlen)
+ unsigned int optlen)
{
int val;
* be changed.
*
*/
-static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, int optlen) {
+static int sctp_setsockopt_rtoinfo(struct sock *sk, char __user *optval, unsigned int optlen)
+{
struct sctp_rtoinfo rtoinfo;
struct sctp_association *asoc;
* See [SCTP] for more information.
*
*/
-static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, int optlen)
+static int sctp_setsockopt_associnfo(struct sock *sk, char __user *optval, unsigned int optlen)
{
struct sctp_assocparams assocparams;
* addresses and a user will receive both PF_INET6 and PF_INET type
* addresses on the socket.
*/
-static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, int optlen)
+static int sctp_setsockopt_mappedv4(struct sock *sk, char __user *optval, unsigned int optlen)
{
int val;
struct sctp_sock *sp = sctp_sk(sk);
* changed (effecting future associations only).
* assoc_value: This parameter specifies the maximum size in bytes.
*/
-static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, int optlen)
+static int sctp_setsockopt_maxseg(struct sock *sk, char __user *optval, unsigned int optlen)
{
struct sctp_assoc_value params;
struct sctp_association *asoc;
* set primary request:
*/
static int sctp_setsockopt_peer_primary_addr(struct sock *sk, char __user *optval,
- int optlen)
+ unsigned int optlen)
{
struct sctp_sock *sp;
struct sctp_endpoint *ep;
}
static int sctp_setsockopt_adaptation_layer(struct sock *sk, char __user *optval,
- int optlen)
+ unsigned int optlen)
{
struct sctp_setadaptation adaptation;
* saved with outbound messages.
*/
static int sctp_setsockopt_context(struct sock *sk, char __user *optval,
- int optlen)
+ unsigned int optlen)
{
struct sctp_assoc_value params;
struct sctp_sock *sp;
*/
static int sctp_setsockopt_fragment_interleave(struct sock *sk,
char __user *optval,
- int optlen)
+ unsigned int optlen)
{
int val;
*/
static int sctp_setsockopt_partial_delivery_point(struct sock *sk,
char __user *optval,
- int optlen)
+ unsigned int optlen)
{
u32 val;
*/
static int sctp_setsockopt_maxburst(struct sock *sk,
char __user *optval,
- int optlen)
+ unsigned int optlen)
{
struct sctp_assoc_value params;
struct sctp_sock *sp;
* will only effect future associations on the socket.
*/
static int sctp_setsockopt_auth_chunk(struct sock *sk,
- char __user *optval,
- int optlen)
+ char __user *optval,
+ unsigned int optlen)
{
struct sctp_authchunk val;
* endpoint requires the peer to use.
*/
static int sctp_setsockopt_hmac_ident(struct sock *sk,
- char __user *optval,
- int optlen)
+ char __user *optval,
+ unsigned int optlen)
{
struct sctp_hmacalgo *hmacs;
u32 idents;
*/
static int sctp_setsockopt_auth_key(struct sock *sk,
char __user *optval,
- int optlen)
+ unsigned int optlen)
{
struct sctp_authkey *authkey;
struct sctp_association *asoc;
* the association shared key.
*/
static int sctp_setsockopt_active_key(struct sock *sk,
- char __user *optval,
- int optlen)
+ char __user *optval,
+ unsigned int optlen)
{
struct sctp_authkeyid val;
struct sctp_association *asoc;
* This set option will delete a shared secret key from use.
*/
static int sctp_setsockopt_del_key(struct sock *sk,
- char __user *optval,
- int optlen)
+ char __user *optval,
+ unsigned int optlen)
{
struct sctp_authkeyid val;
struct sctp_association *asoc;
* optlen - the size of the buffer.
*/
SCTP_STATIC int sctp_setsockopt(struct sock *sk, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
int retval = 0;
unsigned long a[6];
unsigned long a0, a1;
int err;
+ unsigned int len;
if (call < 1 || call > SYS_ACCEPT4)
return -EINVAL;
+ len = nargs[call];
+ if (len > sizeof(a))
+ return -EINVAL;
+
/* copy_from_user should be SMP safe. */
- if (copy_from_user(a, args, nargs[call]))
+ if (copy_from_user(a, args, len))
return -EFAULT;
audit_socketcall(nargs[call] / sizeof(unsigned long), a);
}
int kernel_setsockopt(struct socket *sock, int level, int optname,
- char *optval, int optlen)
+ char *optval, unsigned int optlen)
{
mm_segment_t oldfs = get_fs();
int err;
#include <linux/types.h>
#include <linux/module.h>
-#include <linux/utsname.h>
#include <linux/sunrpc/clnt.h>
#ifdef RPC_DEBUG
/**
* rpc_run_bc_task - Allocate a new RPC task for backchannel use, then run
* rpc_execute against it
- * @ops: RPC call ops
+ * @req: RPC request
+ * @tk_ops: RPC call ops
*/
struct rpc_task *rpc_run_bc_task(struct rpc_rqst *req,
- const struct rpc_call_ops *tk_ops)
+ const struct rpc_call_ops *tk_ops)
{
struct rpc_task *task;
struct xdr_buf *xbufp = &req->rq_snd_buf;
/**
* rpc_create_client_dir - Create a new rpc_client directory in rpc_pipefs
- * @path: path from the rpc_pipefs root to the new directory
+ * @dentry: dentry from the rpc_pipefs root to the new directory
+ * @name: &struct qstr for the name
* @rpc_client: rpc client to associate with this directory
*
* This creates a directory at the given @path associated with
rqstp->rq_xprt_ctxt = NULL;
dprintk("svc: service %p, releasing skb %p\n", rqstp, skb);
- skb_free_datagram(svsk->sk_sk, skb);
+ skb_free_datagram_locked(svsk->sk_sk, skb);
}
}
"svc: received unknown control message %d/%d; "
"dropping RPC reply datagram\n",
cmh->cmsg_level, cmh->cmsg_type);
- skb_free_datagram(svsk->sk_sk, skb);
+ skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
if (csum_partial_copy_to_xdr(&rqstp->rq_arg, skb)) {
local_bh_enable();
/* checksum error */
- skb_free_datagram(svsk->sk_sk, skb);
+ skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
local_bh_enable();
- skb_free_datagram(svsk->sk_sk, skb);
+ skb_free_datagram_locked(svsk->sk_sk, skb);
} else {
/* we can use it in-place */
rqstp->rq_arg.head[0].iov_base = skb->data +
sizeof(struct udphdr);
rqstp->rq_arg.head[0].iov_len = len;
if (skb_checksum_complete(skb)) {
- skb_free_datagram(svsk->sk_sk, skb);
+ skb_free_datagram_locked(svsk->sk_sk, skb);
return 0;
}
rqstp->rq_xprt_ctxt = skb;
}
}
-static int proc_do_xprt(ctl_table *table, int write, struct file *file,
+static int proc_do_xprt(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char tmpbuf[256];
}
static int
-proc_dodebug(ctl_table *table, int write, struct file *file,
+proc_dodebug(ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
char tmpbuf[20], c, *s;
* current value.
*/
static int read_reset_stat(ctl_table *table, int write,
- struct file *filp, void __user *buffer, size_t *lenp,
+ void __user *buffer, size_t *lenp,
loff_t *ppos)
{
atomic_t *stat = (atomic_t *)table->data;
#include <linux/sunrpc/svc_xprt.h>
#include <linux/sunrpc/debug.h>
#include <linux/sunrpc/rpc_rdma.h>
+#include <linux/sched.h>
#include <linux/spinlock.h>
#include <rdma/ib_verbs.h>
#include <rdma/rdma_cm.h>
dprintk("RPC: xs_close xprt %p\n", xprt);
xs_reset_transport(transport);
+ xprt->reestablish_timeout = 0;
smp_mb__before_clear_bit();
clear_bit(XPRT_CONNECTION_ABORT, &xprt->state);
if (xprt->shutdown)
goto out;
+ /* Any data means we had a useful conversation, so
+ * the we don't need to delay the next reconnect
+ */
+ if (xprt->reestablish_timeout)
+ xprt->reestablish_timeout = 0;
+
/* We use rd_desc to pass struct xprt to xs_tcp_data_recv */
rd_desc.arg.data = xprt;
do {
&transport->connect_worker,
xprt->reestablish_timeout);
xprt->reestablish_timeout <<= 1;
+ if (xprt->reestablish_timeout < XS_TCP_INIT_REEST_TO)
+ xprt->reestablish_timeout = XS_TCP_INIT_REEST_TO;
if (xprt->reestablish_timeout > XS_TCP_MAX_REEST_TO)
xprt->reestablish_timeout = XS_TCP_MAX_REEST_TO;
} else {
*/
static int setsockopt(struct socket *sock,
- int lvl, int opt, char __user *ov, int ol)
+ int lvl, int opt, char __user *ov, unsigned int ol)
{
struct sock *sk = sock->sk;
struct tipc_port *tport = tipc_sk_port(sk);
err = -ECONNREFUSED;
if (other->sk_state != TCP_LISTEN)
goto out_unlock;
+ if (other->sk_shutdown & RCV_SHUTDOWN)
+ goto out_unlock;
if (unix_recvq_full(other)) {
err = -EAGAIN;
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/rtnetlink.h>
+#include <linux/sched.h>
#include <net/genetlink.h>
#include <net/cfg80211.h>
#include "nl80211.h"
struct wireless_dev *wdev);
void cfg80211_conn_work(struct work_struct *work);
+void cfg80211_sme_failed_assoc(struct wireless_dev *wdev);
bool cfg80211_sme_failed_reassoc(struct wireless_dev *wdev);
/* internal helpers */
u8 *ie = mgmt->u.assoc_resp.variable;
int i, ieoffs = offsetof(struct ieee80211_mgmt, u.assoc_resp.variable);
struct cfg80211_internal_bss *bss = NULL;
+ bool need_connect_result = true;
wdev_lock(wdev);
}
WARN_ON(!bss);
+ } else if (wdev->conn) {
+ cfg80211_sme_failed_assoc(wdev);
+ need_connect_result = false;
+ /*
+ * do not call connect_result() now because the
+ * sme will schedule work that does it later.
+ */
+ goto out;
}
if (!wdev->conn && wdev->sme_state == CFG80211_SME_IDLE) {
rdev = cfg80211_get_dev_from_info(info);
if (IS_ERR(rdev)) {
err = PTR_ERR(rdev);
- goto out;
+ goto out_rtnl;
}
net = get_net_ns_by_pid(pid);
put_net(net);
out:
cfg80211_unlock_rdev(rdev);
+ out_rtnl:
rtnl_unlock();
return err;
}
CFG80211_CONN_AUTHENTICATING,
CFG80211_CONN_ASSOCIATE_NEXT,
CFG80211_CONN_ASSOCIATING,
+ CFG80211_CONN_DEAUTH_ASSOC_FAIL,
} state;
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
u8 *ie;
NULL, 0,
WLAN_REASON_DEAUTH_LEAVING);
return err;
+ case CFG80211_CONN_DEAUTH_ASSOC_FAIL:
+ __cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
+ NULL, 0,
+ WLAN_REASON_DEAUTH_LEAVING);
+ /* return an error so that we call __cfg80211_connect_result() */
+ return -EINVAL;
default:
return 0;
}
struct cfg80211_registered_device *rdev =
container_of(work, struct cfg80211_registered_device, conn_work);
struct wireless_dev *wdev;
+ u8 bssid_buf[ETH_ALEN], *bssid = NULL;
rtnl_lock();
cfg80211_lock_rdev(rdev);
wdev_unlock(wdev);
continue;
}
+ if (wdev->conn->params.bssid) {
+ memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN);
+ bssid = bssid_buf;
+ }
if (cfg80211_conn_do_work(wdev))
__cfg80211_connect_result(
- wdev->netdev,
- wdev->conn->params.bssid,
+ wdev->netdev, bssid,
NULL, 0, NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
false, NULL);
return true;
}
+void cfg80211_sme_failed_assoc(struct wireless_dev *wdev)
+{
+ struct wiphy *wiphy = wdev->wiphy;
+ struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
+
+ wdev->conn->state = CFG80211_CONN_DEAUTH_ASSOC_FAIL;
+ schedule_work(&rdev->conn_work);
+}
+
void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
wdev->conn->params.ssid = wdev->ssid;
wdev->conn->params.ssid_len = connect->ssid_len;
- /* don't care about result -- but fill bssid & channel */
- if (!wdev->conn->params.bssid || !wdev->conn->params.channel)
- bss = cfg80211_get_conn_bss(wdev);
+ /* see if we have the bss already */
+ bss = cfg80211_get_conn_bss(wdev);
wdev->sme_state = CFG80211_SME_CONNECTING;
wdev->connect_keys = connkeys;
wdev->wext.connect.ie = wdev->wext.ie;
wdev->wext.connect.ie_len = wdev->wext.ie_len;
- wdev->wext.connect.privacy = wdev->wext.default_key != -1;
if (wdev->wext.keys) {
wdev->wext.keys->def = wdev->wext.default_key;
wdev->wext.keys->defmgmt = wdev->wext.default_mgmt_key;
+ if (wdev->wext.default_key != -1)
+ wdev->wext.connect.privacy = true;
}
if (!wdev->wext.connect.ssid_len)
data->flags = 1;
data->length = wdev->wext.connect.ssid_len;
memcpy(ssid, wdev->wext.connect.ssid, data->length);
- } else
- data->flags = 0;
+ }
wdev_unlock(wdev);
return 0;
wdev_lock(wdev);
if (wdev->current_bss)
memcpy(ap_addr->sa_data, wdev->current_bss->pub.bssid, ETH_ALEN);
- else if (wdev->wext.connect.bssid)
- memcpy(ap_addr->sa_data, wdev->wext.connect.bssid, ETH_ALEN);
else
memset(ap_addr->sa_data, 0, ETH_ALEN);
wdev_unlock(wdev);
/*
* Get statistics out of the driver
*/
-static struct iw_statistics *get_wireless_stats(struct net_device *dev)
+struct iw_statistics *get_wireless_stats(struct net_device *dev)
{
/* New location */
if ((dev->wireless_handlers != NULL) &&
essid_compat = 1;
else if (IW_IS_SET(cmd) && (iwp->length != 0)) {
char essid[IW_ESSID_MAX_SIZE + 1];
+ unsigned int len;
+ len = iwp->length * descr->token_size;
- err = copy_from_user(essid, iwp->pointer,
- iwp->length *
- descr->token_size);
+ if (len > IW_ESSID_MAX_SIZE)
+ return -EFAULT;
+
+ err = copy_from_user(essid, iwp->pointer, len);
if (err)
return -EFAULT;
*/
static int x25_setsockopt(struct socket *sock, int level, int optname,
- char __user *optval, int optlen)
+ char __user *optval, unsigned int optlen)
{
int opt;
struct sock *sk = sock->sk;
return -EPERM;
}
-static struct file_operations mark_ops = {
+static const struct file_operations mark_ops = {
.open = my_open,
};
# is automatically cleaned up.
try-run = $(shell set -e; \
TMP="$(TMPOUT).$$$$.tmp"; \
+ TMPO="$(TMPOUT).$$$$.o"; \
if ($(1)) >/dev/null 2>&1; \
then echo "$(2)"; \
else echo "$(3)"; \
fi; \
- rm -f "$$TMP")
+ rm -f "$$TMP" "$$TMPO")
# as-option
# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
# Usage: cflags-y += $(call as-instr,instr,option1,option2)
as-instr = $(call try-run,\
- echo -e "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -xassembler -o "$$TMP" -,$(2),$(3))
+ /bin/echo -e "$(1)" | $(CC) $(KBUILD_AFLAGS) -c -xassembler -o "$$TMP" -,$(2),$(3))
# cc-option
# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
cc-option = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
+ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",$(1),$(2))
# cc-option-yn
# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
cc-option-yn = $(call try-run,\
- $(CC) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
+ $(CC) $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(1) -c -xc /dev/null -o "$$TMP",y,n)
# cc-option-align
# Prefix align with either -falign or -malign
# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
cc-ifversion = $(shell [ $(call cc-version, $(CC)) $(1) $(2) ] && echo $(3))
+# cc-ldoption
+# Usage: ldflags += $(call cc-ldoption, -Wl$(comma)--hash-style=both)
+cc-ldoption = $(call try-run,\
+ $(CC) $(1) -nostdlib -xc /dev/null -o "$$TMP",$(1),$(2))
+
# ld-option
-# Usage: ldflags += $(call ld-option, -Wl$(comma)--hash-style=both)
+# Usage: LDFLAGS += $(call ld-option, -X)
ld-option = $(call try-run,\
- $(CC) $(1) -nostdlib -xc /dev/null -o "$$TMP",$(1),$(2))
+ $(CC) /dev/null -c -o "$$TMPO" ; $(LD) $(1) "$$TMPO" -o "$$TMP",$(1),$(2))
######
endif
ifdef CONFIG_FTRACE_MCOUNT_RECORD
-cmd_record_mcount = perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
+cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
"$(if $(CONFIG_64BIT),64,32)" \
"$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
"$(if $(part-of-module),1,0)" "$(@)";
$(call echo-cmd,checksrc) $(cmd_checksrc) \
$(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \
$(cmd_modversions) \
+ $(call echo-cmd,record_mcount) \
$(cmd_record_mcount) \
scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
$(dot-target).tmp; \
# Linker scripts preprocessor (.lds.S -> .lds)
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds_S = LDS $@
- cmd_cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -o $@ $<
+ cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
+ -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
$(obj)/%.lds: $(src)/%.lds.S FORCE
$(call if_changed_dep,cpp_lds_S)
# Bzip2 and LZMA do not include size in file... so we have to fake that;
# append the size as a 32-bit littleendian number as gzip does.
-size_append = echo -ne $(shell \
+size_append = /bin/echo -ne $(shell \
dec_size=0; \
for F in $1; do \
fsize=$$(stat -c "%s" $$F); \
static char *srctree, *kernsrctree;
-void usage (void)
+static void usage (void)
{
fprintf(stderr, "Usage: docproc {doc|depend} file\n");
fprintf(stderr, "Input is read from file.tmpl. Output is sent to stdout\n");
/*
* Execute kernel-doc with parameters given in svec
*/
-void exec_kernel_doc(char **svec)
+static void exec_kernel_doc(char **svec)
{
pid_t pid;
int ret;
struct symfile symfilelist[MAXFILES];
int symfilecnt = 0;
-void add_new_symbol(struct symfile *sym, char * symname)
+static void add_new_symbol(struct symfile *sym, char * symname)
{
sym->symbollist =
realloc(sym->symbollist, (sym->symbolcnt + 1) * sizeof(char *));
}
/* Add a filename to the list */
-struct symfile * add_new_file(char * filename)
+static struct symfile * add_new_file(char * filename)
{
symfilelist[symfilecnt++].filename = strdup(filename);
return &symfilelist[symfilecnt - 1];
}
/* Check if file already are present in the list */
-struct symfile * filename_exist(char * filename)
+static struct symfile * filename_exist(char * filename)
{
int i;
for (i=0; i < symfilecnt; i++)
* List all files referenced within the template file.
* Files are separated by tabs.
*/
-void adddep(char * file) { printf("\t%s", file); }
-void adddep2(char * file, char * line) { line = line; adddep(file); }
-void noaction(char * line) { line = line; }
-void noaction2(char * file, char * line) { file = file; line = line; }
+static void adddep(char * file) { printf("\t%s", file); }
+static void adddep2(char * file, char * line) { line = line; adddep(file); }
+static void noaction(char * line) { line = line; }
+static void noaction2(char * file, char * line) { file = file; line = line; }
/* Echo the line without further action */
-void printline(char * line) { printf("%s", line); }
+static void printline(char * line) { printf("%s", line); }
/*
* Find all symbols in filename that are exported with EXPORT_SYMBOL &
* EXPORT_SYMBOL_GPL (& EXPORT_SYMBOL_GPL_FUTURE implicitly).
* All symbols located are stored in symfilelist.
*/
-void find_export_symbols(char * filename)
+static void find_export_symbols(char * filename)
{
FILE * fp;
struct symfile *sym;
* intfunc uses -nofunction
* extfunc uses -function
*/
-void docfunctions(char * filename, char * type)
+static void docfunctions(char * filename, char * type)
{
int i,j;
int symcnt = 0;
fflush(stdout);
free(vec);
}
-void intfunc(char * filename) { docfunctions(filename, NOFUNCTION); }
-void extfunc(char * filename) { docfunctions(filename, FUNCTION); }
+static void intfunc(char * filename) { docfunctions(filename, NOFUNCTION); }
+static void extfunc(char * filename) { docfunctions(filename, FUNCTION); }
/*
* Document specific function(s) in a file.
* Call kernel-doc with the following parameters:
* kernel-doc -docbook -function function1 [-function function2]
*/
-void singfunc(char * filename, char * line)
+static void singfunc(char * filename, char * line)
{
char *vec[200]; /* Enough for specific functions */
int i, idx = 0;
* Call kernel-doc with the following parameters:
* kernel-doc -docbook -function "doc section" filename
*/
-void docsect(char *filename, char *line)
+static void docsect(char *filename, char *line)
{
char *vec[6]; /* kerneldoc -docbook -function "section" file NULL */
char *s;
* 5) Lines containing !P
* 6) Default lines - lines not matching the above
*/
-void parse_file(FILE *infile)
+static void parse_file(FILE *infile)
{
char line[MAXLINESZ];
char * s;
char *depfile;
char *cmdline;
-void usage(void)
+static void usage(void)
{
fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
exit(1);
/*
* Print out the commandline prefixed with cmd_<target filename> :=
*/
-void print_cmdline(void)
+static void print_cmdline(void)
{
printf("cmd_%s := %s\n\n", target, cmdline);
}
* Grow the configuration string to a desired length.
* Usually the first growth is plenty.
*/
-void grow_config(int len)
+static void grow_config(int len)
{
while (len_config + len > size_config) {
if (size_config == 0)
/*
* Lookup a value in the configuration string.
*/
-int is_defined_config(const char * name, int len)
+static int is_defined_config(const char * name, int len)
{
const char * pconfig;
const char * plast = str_config + len_config - len;
/*
* Add a new value to the configuration string.
*/
-void define_config(const char * name, int len)
+static void define_config(const char * name, int len)
{
grow_config(len + 1);
/*
* Clear the set of configuration strings.
*/
-void clear_config(void)
+static void clear_config(void)
{
len_config = 0;
define_config("", 0);
/*
* Record the use of a CONFIG_* word.
*/
-void use_config(char *m, int slen)
+static void use_config(char *m, int slen)
{
char s[PATH_MAX];
char *p;
printf(" $(wildcard include/config/%s.h) \\\n", s);
}
-void parse_config_file(char *map, size_t len)
+static void parse_config_file(char *map, size_t len)
{
int *end = (int *) (map + len);
/* start at +1, so that p can never be < map */
}
/* test is s ends in sub */
-int strrcmp(char *s, char *sub)
+static int strrcmp(char *s, char *sub)
{
int slen = strlen(s);
int sublen = strlen(sub);
return memcmp(s + slen - sublen, sub, sublen);
}
-void do_config_file(char *filename)
+static void do_config_file(char *filename)
{
struct stat st;
int fd;
close(fd);
}
-void parse_dep_file(void *map, size_t len)
+static void parse_dep_file(void *map, size_t len)
{
char *m = map;
char *end = m + len;
printf("$(deps_%s):\n", target);
}
-void print_deps(void)
+static void print_deps(void)
{
struct stat st;
int fd;
close(fd);
}
-void traps(void)
+static void traps(void)
{
static char test[] __attribute__((aligned(sizeof(int)))) = "CONF";
int *p = (int *)test;
* http://www.cse.yorku.ca/~oz/hash.html
*/
-unsigned int djb2_hash(char *str)
+static unsigned int djb2_hash(char *str)
{
unsigned long hash = 5381;
int c;
return (unsigned int)(hash & ((1 << DYNAMIC_DEBUG_HASH_BITS) - 1));
}
-unsigned int r5_hash(char *str)
+static unsigned int r5_hash(char *str)
{
unsigned long hash = 0;
int c;
#!/usr/bin/perl
#
-# checkincludes: Find files included more than once in (other) files.
+# checkincludes: find/remove files included more than once
+#
# Copyright abandoned, 2000, Niels Kristian Bech Jensen <nkbj@image.dk>.
+# Copyright 2009 Luis R. Rodriguez <mcgrof@gmail.com>
+#
+# This script checks for duplicate includes. It also has support
+# to remove them in place. Note that this will not take into
+# consideration macros so you should run this only if you know
+# you do have real dups and do not have them under #ifdef's. You
+# could also just review the results.
+
+sub usage {
+ print "Usage: checkincludes.pl [-r]\n";
+ print "By default we just warn of duplicates\n";
+ print "To remove duplicated includes in place use -r\n";
+ exit 1;
+}
+
+my $remove = 0;
+
+if ($#ARGV < 0) {
+ usage();
+}
+
+if ($#ARGV >= 1) {
+ if ($ARGV[0] =~ /^-/) {
+ if ($ARGV[0] eq "-r") {
+ $remove = 1;
+ shift;
+ } else {
+ usage();
+ }
+ }
+}
foreach $file (@ARGV) {
open(FILE, $file) or die "Cannot open $file: $!.\n";
my %includedfiles = ();
+ my @file_lines = ();
while (<FILE>) {
if (m/^\s*#\s*include\s*[<"](\S*)[>"]/o) {
++$includedfiles{$1};
}
+ push(@file_lines, $_);
}
-
- foreach $filename (keys %includedfiles) {
- if ($includedfiles{$filename} > 1) {
- print "$file: $filename is included more than once.\n";
+
+ close(FILE);
+
+ if (!$remove) {
+ foreach $filename (keys %includedfiles) {
+ if ($includedfiles{$filename} > 1) {
+ print "$file: $filename is included more than once.\n";
+ }
}
+ next;
}
+ open(FILE,">$file") || die("Cannot write to $file: $!");
+
+ my $dups = 0;
+ foreach (@file_lines) {
+ if (m/^\s*#\s*include\s*[<"](\S*)[>"]/o) {
+ foreach $filename (keys %includedfiles) {
+ if ($1 eq $filename) {
+ if ($includedfiles{$filename} > 1) {
+ $includedfiles{$filename}--;
+ $dups++;
+ } else {
+ print FILE $_;
+ }
+ }
+ }
+ } else {
+ print FILE $_;
+ }
+ }
+ if ($dups > 0) {
+ print "$file: removed $dups duplicate includes\n";
+ }
close(FILE);
}
# Doing this once at the beginning saves a lot of time, on a cache-hot tree.
Kconfigs="`find . -name 'Kconfig' -o -name 'Kconfig*[^~]'`"
-echo -e "File list \tundefined symbol used"
+/bin/echo -e "File list \tundefined symbol used"
find $paths -name '*.[chS]' -o -name 'Makefile' -o -name 'Makefile*[^~]'| while read i
do
# Output the bare Kconfig variable and the filename; the _MODULE part at
# beyond the purpose of this script.
symb_bare=`echo $symb | sed -e 's/_MODULE//'`
if ! grep -q "\<$symb_bare\>" $Kconfigs; then
- echo -e "$files: \t$symb"
+ /bin/echo -e "$files: \t$symb"
fi
done|sort
# (c) 2001, Dave Jones. <davej@redhat.com> (the file handling bit)
# (c) 2005, Joel Schopp <jschopp@austin.ibm.com> (the ugly bit)
# (c) 2007,2008, Andy Whitcroft <apw@uk.ibm.com> (new conditions, test suite)
-# (c) 2008, Andy Whitcroft <apw@canonical.com>
+# (c) 2008,
2009, Andy Whitcroft <apw@canonical.com>
# Licensed under the terms of the GNU GPL License version 2
use strict;
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.29';
+my $V = '0.30';
use Getopt::Long qw(:config no_auto_abbrev);
my $emitted_corrupt = 0;
-our $Ident = qr{[A-Za-z_][A-Za-z\d_]*};
+our $Ident = qr{
+ [A-Za-z_][A-Za-z\d_]*
+ (?:\s*\#\#\s*[A-Za-z_][A-Za-z\d_]*)*
+ }x;
our $Storage = qr{extern|static|asmlinkage};
our $Sparse = qr{
__user|
sub possible {
my ($possible, $line) = @_;
-
- print "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
- if ($possible !~ /(?:
+ my $notPermitted = qr{(?:
^(?:
$Modifier|
$Storage|
$Type|
- DEFINE_\S+|
+ DEFINE_\S+
+ )$|
+ ^(?:
goto|
return|
case|
else|
asm|__asm__|
do
- )$|
+ )(?:\s|$)|
^(?:typedef|struct|enum)\b
- )/x) {
+ )}x;
+ warn "CHECK<$possible> ($line)\n" if ($dbg_possible > 2);
+ if ($possible !~ $notPermitted) {
# Check for modifiers.
$possible =~ s/\s*$Storage\s*//g;
$possible =~ s/\s*$Sparse\s*//g;
} elsif ($possible =~ /\s/) {
$possible =~ s/\s*$Type\s*//g;
for my $modifier (split(' ', $possible)) {
- warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
- push(@modifierList, $modifier);
+ if ($modifier !~ $notPermitted) {
+ warn "MODIFIER: $modifier ($possible) ($line)\n" if ($dbg_possible);
+ push(@modifierList, $modifier);
+ }
}
} else {
# suppression flags
my %suppress_ifbraces;
my %suppress_whiletrailers;
+ my %suppress_export;
# Pre-scan the patch sanitizing the lines.
# Pre-scan the patch looking for any __setup documentation.
$linenr++;
my $rawline = $rawlines[$linenr - 1];
- my $hunk_line = ($realcnt != 0);
#extract the line range in the file after the patch is applied
if ($line=~/^\@\@ -\d+(?:,\d+)? \+(\d+)(,(\d+))? \@\@/) {
%suppress_ifbraces = ();
%suppress_whiletrailers = ();
+ %suppress_export = ();
next;
# track the line number as we move through the hunk, note that
$realcnt--;
}
+ my $hunk_line = ($realcnt != 0);
+
#make up the handle for any error we report on this line
$prefix = "$filename:$realline: " if ($emacs && $file);
$prefix = "$filename:$linenr: " if ($emacs && !$file);
}
# Check for potential 'bare' types
- my ($stat, $cond, $line_nr_next, $remain_next, $off_next);
+ my ($stat, $cond, $line_nr_next, $remain_next, $off_next,
+ $realline_next);
if ($realcnt && $line =~ /.\s*\S/) {
($stat, $cond, $line_nr_next, $remain_next, $off_next) =
ctx_statement_block($linenr, $realcnt, 0);
$stat =~ s/\n./\n /g;
$cond =~ s/\n./\n /g;
+ # Find the real next line.
+ $realline_next = $line_nr_next;
+ if (defined $realline_next &&
+ (!defined $lines[$realline_next - 1] ||
+ substr($lines[$realline_next - 1], $off_next) =~ /^\s*$/)) {
+ $realline_next++;
+ }
+
my $s = $stat;
$s =~ s/{.*$//s;
}
# check for initialisation to aggregates open brace on the next line
- if ($prevline =~ /$Declare\s*$Ident\s*=\s*$/ &&
- $line =~ /^.\s*{/) {
+ if ($line =~ /^.\s*{/ &&
+ $prevline =~ /(?:^|[^=])=\s*$/) {
ERROR("that open brace { should be on the previous line\n" . $hereprev);
}
$line =~ s@//.*@@;
$opline =~ s@//.*@@;
-#EXPORT_SYMBOL should immediately follow its function closing }.
- if (($line =~ /EXPORT_SYMBOL.*\((.*)\)/) ||
- ($line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+# EXPORT_SYMBOL should immediately follow the thing it is exporting, consider
+# the whole statement.
+#print "APW <$lines[$realline_next - 1]>\n";
+ if (defined $realline_next &&
+ exists $lines[$realline_next - 1] &&
+ !defined $suppress_export{$realline_next} &&
+ ($lines[$realline_next - 1] =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
+ $lines[$realline_next - 1] =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
my $name = $1;
- if ($prevline !~ /(?:
- ^.}|
+ if ($stat !~ /(?:
+ \n.}\s*$|
^.DEFINE_$Ident\(\Q$name\E\)|
^.DECLARE_$Ident\(\Q$name\E\)|
^.LIST_HEAD\(\Q$name\E\)|
- ^.$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
- \b\Q$name\E(?:\s+$Attribute)?\s*(?:;|=|\[)
+ ^.(?:$Storage\s+)?$Type\s*\(\s*\*\s*\Q$name\E\s*\)\s*\(|
+ \b\Q$name\E(?:\s+$Attribute)*\s*(?:;|=|\[|\()
)/x) {
- WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
+#print "FOO A<$lines[$realline_next - 1]> stat<$stat> name<$name>\n";
+ $suppress_export{$realline_next} = 2;
+ } else {
+ $suppress_export{$realline_next} = 1;
}
}
+ if (!defined $suppress_export{$linenr} &&
+ $prevline =~ /^.\s*$/ &&
+ ($line =~ /EXPORT_SYMBOL.*\((.*)\)/ ||
+ $line =~ /EXPORT_UNUSED_SYMBOL.*\((.*)\)/)) {
+#print "FOO B <$lines[$linenr - 1]>\n";
+ $suppress_export{$linenr} = 2;
+ }
+ if (defined $suppress_export{$linenr} &&
+ $suppress_export{$linenr} == 2) {
+ WARN("EXPORT_SYMBOL(foo); should immediately follow its function/variable\n" . $herecurr);
+ }
# check for external initialisers.
if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
use strict;
my $P = $0;
-my $V = '0.20';
+my $V = '0.21';
use Getopt::Long qw(:config no_auto_abbrev);
my $web = 0;
my $subsystem = 0;
my $status = 0;
+my $keywords = 1;
my $from_filename = 0;
my $pattern_depth = 0;
my $version = 0;
'scm!' => \$scm,
'web!' => \$web,
'pattern-depth=i' => \$pattern_depth,
+ 'k|keywords!' => \$keywords,
'f|file' => \$from_filename,
'v|version' => \$version,
'h|help' => \$help,
## Read MAINTAINERS for type/value pairs
my @typevalue = ();
+my %keyword_hash;
+
open(MAINT, "<${lk_path}MAINTAINERS") || die "$P: Can't open MAINTAINERS\n";
while (<MAINT>) {
my $line = $_;
if ((-d $value)) {
$value =~ s@([^/])$@$1/@;
}
+ } elsif ($type eq "K") {
+ $keyword_hash{@typevalue} = $value;
}
push(@typevalue, "$type:$value");
} elsif (!/^(\s)*$/) {
my @files = ();
my @range = ();
+my @keyword_tvi = ();
foreach my $file (@ARGV) {
##if $file is a directory and it lacks a trailing slash, add one
}
if ($from_filename) {
push(@files, $file);
+ if (-f $file && $keywords) {
+ open(FILE, "<$file") or die "$P: Can't open ${file}\n";
+ while (<FILE>) {
+ my $patch_line = $_;
+ foreach my $line (keys %keyword_hash) {
+ if ($patch_line =~ m/^.*$keyword_hash{$line}/x) {
+ push(@keyword_tvi, $line);
+ }
+ }
+ }
+ close(FILE);
+ }
} else {
my $file_cnt = @files;
my $lastfile;
open(PATCH, "<$file") or die "$P: Can't open ${file}\n";
while (<PATCH>) {
+ my $patch_line = $_;
if (m/^\+\+\+\s+(\S+)/) {
my $filename = $1;
$filename =~ s@^[^/]*/@@;
if ($email_git_blame) {
push(@range, "$lastfile:$1:$2");
}
+ } elsif ($keywords) {
+ foreach my $line (keys %keyword_hash) {
+ if ($patch_line =~ m/^[+-].*$keyword_hash{$line}/x) {
+ push(@keyword_tvi, $line);
+ }
+ }
}
}
close(PATCH);
}
}
+if ($keywords) {
+ @keyword_tvi = sort_and_uniq(@keyword_tvi);
+ foreach my $line (@keyword_tvi) {
+ add_categories($line);
+ }
+}
+
if ($email) {
foreach my $chief (@penguin_chief) {
if ($chief =~ m/^(.*):(.*)/) {
Other options:
--pattern-depth => Number of pattern directory traversals (default: 0 (all))
+ --keywords => scan patch for keywords (default: 1 (on))
--version => show version
--help => show this help information
}
sub find_starting_index {
-
my ($index) = @_;
while ($index > 0) {
my ($readdir, $installdir, $arch, @files) = @ARGV;
-my $unifdef = "scripts/unifdef -U__KERNEL__";
+my $unifdef = "scripts/unifdef -U__KERNEL__ -D__EXPORTED_HEADERS__";
foreach my $file (@files) {
local *INFILE;
static char line[128];
static struct menu *rootEntry;
-static char nohelp_text[] = N_("Sorry, no help available for this option yet.\n");
-
-static const char *get_help(struct menu *menu)
+static void print_help(struct menu *menu)
{
- if (menu_has_help(menu))
- return _(menu_get_help(menu));
- else
- return nohelp_text;
+ struct gstr help = str_new();
+
+ menu_get_ext_help(menu, &help);
+
+ printf("\n%s\n", str_get(&help));
+ str_free(&help);
}
static void strip(char *str)
return 1;
}
-int conf_string(struct menu *menu)
+static int conf_string(struct menu *menu)
{
struct symbol *sym = menu->sym;
const char *def;
case '?':
/* print help */
if (line[1] == '\n') {
- printf("\n%s\n", get_help(menu));
+ print_help(menu);
def = NULL;
break;
}
if (sym_set_tristate_value(sym, newval))
return 0;
help:
- printf("\n%s\n", get_help(menu));
+ print_help(menu);
}
}
fgets(line, 128, stdin);
strip(line);
if (line[0] == '?') {
- printf("\n%s\n", get_help(menu));
+ print_help(menu);
continue;
}
if (!line[0])
if (!child)
continue;
if (line[strlen(line) - 1] == '?') {
- printf("\n%s\n", get_help(child));
+ print_help(child);
continue;
}
sym_set_choice_value(sym, child->sym);
return 0;
}
-int conf_split_config(void)
+static int conf_split_config(void)
{
const char *name;
char path[128];
/*
* e1 || e2 -> ?
*/
-struct expr *expr_join_or(struct expr *e1, struct expr *e2)
+static struct expr *expr_join_or(struct expr *e1, struct expr *e2)
{
struct expr *tmp;
struct symbol *sym1, *sym2;
return NULL;
}
-struct expr *expr_join_and(struct expr *e1, struct expr *e2)
+static struct expr *expr_join_and(struct expr *e1, struct expr *e2)
{
struct expr *tmp;
struct symbol *sym1, *sym2;
static void expr_print_gstr_helper(void *data, struct symbol *sym, const char *str)
{
str_append((struct gstr*)data, str);
+ if (sym)
+ str_printf((struct gstr*)data, " [=%s]", sym_get_string_value(sym));
}
void expr_gstr_print(struct expr *e, struct gstr *gs)
GtkTextBuffer *buffer;
GtkTextIter start, end;
const char *prompt = _(menu_get_prompt(menu));
- gchar *name;
- const char *help;
+ struct gstr help = str_new();
- help = menu_get_help(menu);
-
- /* Gettextize if the help text not empty */
- if ((help != 0) && (help[0] != 0))
- help = _(help);
-
- if (menu->sym && menu->sym->name)
- name = g_strdup_printf(menu->sym->name);
- else
- name = g_strdup("");
+ menu_get_ext_help(menu, &help);
buffer = gtk_text_view_get_buffer(GTK_TEXT_VIEW(text_w));
gtk_text_buffer_get_bounds(buffer, &start, &end);
gtk_text_buffer_get_end_iter(buffer, &end);
gtk_text_buffer_insert_with_tags(buffer, &end, prompt, -1, tag1,
NULL);
- gtk_text_buffer_insert_at_cursor(buffer, " ", 1);
- gtk_text_buffer_get_end_iter(buffer, &end);
- gtk_text_buffer_insert_with_tags(buffer, &end, name, -1, tag1,
- NULL);
gtk_text_buffer_insert_at_cursor(buffer, "\n\n", 2);
gtk_text_buffer_get_end_iter(buffer, &end);
- gtk_text_buffer_insert_with_tags(buffer, &end, help, -1, tag2,
+ gtk_text_buffer_insert_with_tags(buffer, &end, str_get(&help), -1, tag2,
NULL);
+ str_free(&help);
}
<property name="headers_visible">True</property>
<property name="rules_hint">False</property>
<property name="reorderable">False</property>
- <property name="enable_search">True</property>
+ <property name="enable_search">False</property>
<signal name="cursor_changed" handler="on_treeview2_cursor_changed" last_modification_time="Sun, 12 Jan 2003 15:58:22 GMT"/>
<signal name="button_press_event" handler="on_treeview1_button_press_event" last_modification_time="Sun, 12 Jan 2003 16:03:52 GMT"/>
<signal name="key_press_event" handler="on_treeview2_key_press_event" last_modification_time="Sun, 12 Jan 2003 16:11:44 GMT"/>
<property name="headers_visible">True</property>
<property name="rules_hint">False</property>
<property name="reorderable">False</property>
- <property name="enable_search">True</property>
+ <property name="enable_search">False</property>
<signal name="cursor_changed" handler="on_treeview2_cursor_changed" last_modification_time="Sun, 12 Jan 2003 15:57:55 GMT"/>
<signal name="button_press_event" handler="on_treeview2_button_press_event" last_modification_time="Sun, 12 Jan 2003 15:57:58 GMT"/>
<signal name="key_press_event" handler="on_treeview2_key_press_event" last_modification_time="Sun, 12 Jan 2003 15:58:01 GMT"/>
return rc;
}
-void menu_build_message_list(struct menu *menu)
+static void menu_build_message_list(struct menu *menu)
{
struct menu *child;
"msgstr \"\"\n", self->msg);
}
-void menu__xgettext(void)
+static void menu__xgettext(void)
{
struct message *m = message__list;
P(menu_get_parent_menu,struct menu *,(struct menu *menu));
P(menu_has_help,bool,(struct menu *menu));
P(menu_get_help,const char *,(struct menu *menu));
+P(get_symbol_str,void,(struct gstr *r, struct symbol *sym));
+P(menu_get_ext_help,void,(struct menu *menu, struct gstr *help));
/* symbol.c */
P(symbol_hash,struct symbol *,[SYMBOL_HASHSIZE]);
setmod_text[] = N_(
"This feature depends on another which has been configured as a module.\n"
"As a result, this feature will be built as a module."),
-nohelp_text[] = N_(
- "There is no help available for this kernel option.\n"),
load_config_text[] = N_(
"Enter the name of the configuration file you wish to load. "
"Accept the name shown to restore the configuration you "
static void show_helptext(const char *title, const char *text);
static void show_help(struct menu *menu);
-static void get_prompt_str(struct gstr *r, struct property *prop)
-{
- int i, j;
- struct menu *submenu[8], *menu;
-
- str_printf(r, _("Prompt: %s\n"), _(prop->text));
- str_printf(r, _(" Defined at %s:%d\n"), prop->menu->file->name,
- prop->menu->lineno);
- if (!expr_is_yes(prop->visible.expr)) {
- str_append(r, _(" Depends on: "));
- expr_gstr_print(prop->visible.expr, r);
- str_append(r, "\n");
- }
- menu = prop->menu->parent;
- for (i = 0; menu != &rootmenu && i < 8; menu = menu->parent)
- submenu[i++] = menu;
- if (i > 0) {
- str_printf(r, _(" Location:\n"));
- for (j = 4; --i >= 0; j += 2) {
- menu = submenu[i];
- str_printf(r, "%*c-> %s", j, ' ', _(menu_get_prompt(menu)));
- if (menu->sym) {
- str_printf(r, " (%s [=%s])", menu->sym->name ?
- menu->sym->name : _("<choice>"),
- sym_get_string_value(menu->sym));
- }
- str_append(r, "\n");
- }
- }
-}
-
-static void get_symbol_str(struct gstr *r, struct symbol *sym)
-{
- bool hit;
- struct property *prop;
-
- if (sym && sym->name)
- str_printf(r, "Symbol: %s [=%s]\n", sym->name,
- sym_get_string_value(sym));
- for_all_prompts(sym, prop)
- get_prompt_str(r, prop);
- hit = false;
- for_all_properties(sym, prop, P_SELECT) {
- if (!hit) {
- str_append(r, " Selects: ");
- hit = true;
- } else
- str_printf(r, " && ");
- expr_gstr_print(prop->expr, r);
- }
- if (hit)
- str_append(r, "\n");
- if (sym->rev_dep.expr) {
- str_append(r, _(" Selected by: "));
- expr_gstr_print(sym->rev_dep.expr, r);
- str_append(r, "\n");
- }
- str_append(r, "\n\n");
-}
-
static struct gstr get_relations_str(struct symbol **sym_arr)
{
struct symbol *sym;
static void show_help(struct menu *menu)
{
struct gstr help = str_new();
- struct symbol *sym = menu->sym;
-
- if (menu_has_help(menu))
- {
- if (sym->name) {
- str_printf(&help, "CONFIG_%s:\n\n", sym->name);
- str_append(&help, _(menu_get_help(menu)));
- str_append(&help, "\n");
- }
- } else {
- str_append(&help, nohelp_text);
- }
- get_symbol_str(&help, sym);
+
+ menu_get_ext_help(menu, &help);
+
show_helptext(_(menu_get_prompt(menu)), str_get(&help));
str_free(&help);
}
#define LKC_DIRECT_LINK
#include "lkc.h"
+static const char nohelp_text[] = N_(
+ "There is no help available for this kernel option.\n");
+
struct menu rootmenu;
static struct menu **last_entry_ptr;
current_menu = current_menu->parent;
}
-struct expr *menu_check_dep(struct expr *e)
+static struct expr *menu_check_dep(struct expr *e)
{
if (!e)
return e;
(sym2->type == S_UNKNOWN && sym_string_valid(sym, sym2->name));
}
-void sym_check_prop(struct symbol *sym)
+static void sym_check_prop(struct symbol *sym)
{
struct property *prop;
struct symbol *sym2;
else
return "";
}
+
+static void get_prompt_str(struct gstr *r, struct property *prop)
+{
+ int i, j;
+ struct menu *submenu[8], *menu;
+
+ str_printf(r, _("Prompt: %s\n"), _(prop->text));
+ str_printf(r, _(" Defined at %s:%d\n"), prop->menu->file->name,
+ prop->menu->lineno);
+ if (!expr_is_yes(prop->visible.expr)) {
+ str_append(r, _(" Depends on: "));
+ expr_gstr_print(prop->visible.expr, r);
+ str_append(r, "\n");
+ }
+ menu = prop->menu->parent;
+ for (i = 0; menu != &rootmenu && i < 8; menu = menu->parent)
+ submenu[i++] = menu;
+ if (i > 0) {
+ str_printf(r, _(" Location:\n"));
+ for (j = 4; --i >= 0; j += 2) {
+ menu = submenu[i];
+ str_printf(r, "%*c-> %s", j, ' ', _(menu_get_prompt(menu)));
+ if (menu->sym) {
+ str_printf(r, " (%s [=%s])", menu->sym->name ?
+ menu->sym->name : _("<choice>"),
+ sym_get_string_value(menu->sym));
+ }
+ str_append(r, "\n");
+ }
+ }
+}
+
+void get_symbol_str(struct gstr *r, struct symbol *sym)
+{
+ bool hit;
+ struct property *prop;
+
+ if (sym && sym->name)
+ str_printf(r, "Symbol: %s [=%s]\n", sym->name,
+ sym_get_string_value(sym));
+ for_all_prompts(sym, prop)
+ get_prompt_str(r, prop);
+ hit = false;
+ for_all_properties(sym, prop, P_SELECT) {
+ if (!hit) {
+ str_append(r, " Selects: ");
+ hit = true;
+ } else
+ str_printf(r, " && ");
+ expr_gstr_print(prop->expr, r);
+ }
+ if (hit)
+ str_append(r, "\n");
+ if (sym->rev_dep.expr) {
+ str_append(r, _(" Selected by: "));
+ expr_gstr_print(sym->rev_dep.expr, r);
+ str_append(r, "\n");
+ }
+ str_append(r, "\n\n");
+}
+
+void menu_get_ext_help(struct menu *menu, struct gstr *help)
+{
+ struct symbol *sym = menu->sym;
+
+ if (menu_has_help(menu)) {
+ if (sym->name) {
+ str_printf(help, "CONFIG_%s:\n\n", sym->name);
+ str_append(help, _(menu_get_help(menu)));
+ str_append(help, "\n");
+ }
+ } else {
+ str_append(help, nohelp_text);
+ }
+ if (sym)
+ get_symbol_str(help, sym);
+}
if (showDebug())
debug = debug_info(sym);
- help = menu_get_help(menu);
- /* Gettextize if the help text not empty */
- if (help.isEmpty())
- help = print_filter(menu_get_help(menu));
- else
- help = print_filter(_(menu_get_help(menu)));
+ struct gstr help_gstr = str_new();
+ menu_get_ext_help(menu, &help_gstr);
+ help = print_filter(str_get(&help_gstr));
+ str_free(&help_gstr);
} else if (menu->prompt) {
head += "<big><b>";
head += print_filter(_(menu->prompt->text));
struct expr *sym_env_list;
-void sym_add_default(struct symbol *sym, const char *def)
+static void sym_add_default(struct symbol *sym, const char *def)
{
struct property *prop = prop_alloc(P_DEFAULT, sym);
return NULL;
}
-struct property *sym_get_range_prop(struct symbol *sym)
+static struct property *sym_get_range_prop(struct symbol *sym)
{
struct property *prop;
return "unknown";
}
-void prop_add_env(const char *env)
+static void prop_add_env(const char *env)
{
struct symbol *sym, *sym2;
struct property *prop;
# if it's a module, we need to find the .ko file and calculate a load offset
if ($module ne "") {
- my $dir = dirname($filename);
- $dir = $dir . "/";
- my $mod = $module . ".ko";
- my $modulefile = `find $dir -name $mod | head -1`;
+ my $modulefile = `modinfo $module | grep '^filename:' | awk '{ print \$2 }'`;
chomp($modulefile);
$filename = $modulefile;
if ($filename eq "") {
+#!/bin/sh
+
TARGET=$1
ARCH=$2
SMP=$3
# Truncate to maximum length
UTS_LEN=64
-UTS_TRUNCATE="sed -e s/\(.\{1,$UTS_LEN\}\).*/\1/"
+UTS_TRUNCATE="cut -b -$UTS_LEN"
# Generate a temporary compile.h
echo \#define LINUX_COMPILE_HOST \"`hostname | $UTS_TRUNCATE`\"
if [ -x /bin/dnsdomainname ]; then
- echo \#define LINUX_COMPILE_DOMAIN \"`dnsdomainname | $UTS_TRUNCATE`\"
+ domain=`dnsdomainname 2> /dev/null`
elif [ -x /bin/domainname ]; then
- echo \#define LINUX_COMPILE_DOMAIN \"`domainname | $UTS_TRUNCATE`\"
+ domain=`domainname 2> /dev/null`
+ fi
+
+ if [ -n "$domain" ]; then
+ echo \#define LINUX_COMPILE_DOMAIN \"`echo $domain | $UTS_TRUNCATE`\"
else
echo \#define LINUX_COMPILE_DOMAIN
fi
# e) generate the rpm files, based on kernel.spec
# - Use /. to avoid tar packing just the symlink
+# Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT,
+# but the binrpm-pkg target can; for some reason O= gets ignored.
+
# Do we have rpmbuild, otherwise fall back to the older rpm
RPM := $(shell if [ -x "/usr/bin/rpmbuild" ]; then echo rpmbuild; \
else echo rpm; fi)
$(CONFIG_SHELL) $(MKSPEC) > $@
rpm-pkg rpm: $(objtree)/kernel.spec FORCE
+ @if test -n "$(KBUILD_OUTPUT)"; then \
+ echo "Building source + binary RPM is not possible outside the"; \
+ echo "kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \
+ echo "binrpm-pkg target instead."; \
+ false; \
+ fi
$(MAKE) clean
$(PREV) ln -sf $(srctree) $(KERNELPATH)
$(CONFIG_SHELL) $(srctree)/scripts/setlocalversion > $(objtree)/.scmversion
set -e; \
mv -f $(objtree)/.tmp_version $(objtree)/.version
- $(RPM) $(RPMOPTS) --define "_builddir $(srctree)" --target \
+ $(RPM) $(RPMOPTS) --define "_builddir $(objtree)" --target \
$(UTS_MACHINE) -bb $<
clean-files += $(objtree)/binkernel.spec
echo 'mkdir -p $RPM_BUILD_ROOT/lib/firmware'
echo "%endif"
-echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} modules_install'
+echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} KBUILD_SRC= modules_install'
echo "%ifarch ia64"
echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/efi/vmlinuz-$KERNELRELEASE"
echo 'ln -s '"efi/vmlinuz-$KERNELRELEASE" '$RPM_BUILD_ROOT'"/boot/"
-I ____cacheline_aligned_in_smp \
-I ____cacheline_internodealigned_in_smp \
-I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
- --extra=+f --c-kinds=+px \
+ -I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
+ --extra=+f --c-kinds=-px \
--regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \
--regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
struct cgroup_subsys devices_subsys;
static int devcgroup_can_attach(struct cgroup_subsys *ss,
- struct cgroup *new_cgroup, struct task_struct *task)
+ struct cgroup *new_cgroup, struct task_struct *task,
+ bool threadgroup)
{
if (current != task && !capable(CAP_SYS_ADMIN))
return -EPERM;
return ima_show_htable_value(buf, count, ppos, &ima_htable.violations);
}
-static struct file_operations ima_htable_violations_ops = {
+static const struct file_operations ima_htable_violations_ops = {
.read = ima_show_htable_violations
};
}
-static struct file_operations ima_measurements_count_ops = {
+static const struct file_operations ima_measurements_count_ops = {
.read = ima_show_measurements_count
};
return seq_open(file, &ima_measurments_seqops);
}
-static struct file_operations ima_measurements_ops = {
+static const struct file_operations ima_measurements_ops = {
.open = ima_measurements_open,
.read = seq_read,
.llseek = seq_lseek,
return seq_open(file, &ima_ascii_measurements_seqops);
}
-static struct file_operations ima_ascii_measurements_ops = {
+static const struct file_operations ima_ascii_measurements_ops = {
.open = ima_ascii_measurements_open,
.read = seq_read,
.llseek = seq_lseek,
return 0;
}
-static struct file_operations ima_measure_policy_ops = {
+static const struct file_operations ima_measure_policy_ops = {
.open = ima_open_policy,
.write = ima_write_policy,
.release = ima_release_policy
/* trawl through the keys looking for keyrings */
for (;;) {
- if (key->expiry > now && key->expiry < new_timer) {
+ if (key->expiry > limit && key->expiry < new_timer) {
kdebug("will expire %x in %ld",
- key_serial(key), key->expiry - now);
+ key_serial(key), key->expiry - limit);
new_timer = key->expiry;
}
/* otherwise specify the destination keyring recorded in the
* authorisation key (any KEY_SPEC_*_KEYRING) */
if (ringid >= KEY_SPEC_REQUESTOR_KEYRING) {
- *_dest_keyring = rka->dest_keyring;
+ *_dest_keyring = key_get(rka->dest_keyring);
return 0;
}
char *name1, char *name2)
{
if (!ipv6_addr_any(addr))
- audit_log_format(ab, " %s=%pI6", name1, addr);
+ audit_log_format(ab, " %s=%pI6c", name1, addr);
if (port)
audit_log_format(ab, " %s=%d", name2, ntohs(port));
}
* sysctl handler which just sets dac_mmap_min_addr = the new value and then
* calls update_mmap_min_addr() so non MAP_FIXED hints get rounded properly
*/
-int mmap_min_addr_handler(struct ctl_table *table, int write, struct file *filp,
+int mmap_min_addr_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
int ret;
- ret = proc_doulongvec_minmax(table, write, filp, buffer, lenp, ppos);
+ ret = proc_doulongvec_minmax(table, write, buffer, lenp, ppos);
update_mmap_min_addr();
void avc_disable(void)
{
- avc_flush();
- synchronize_rcu();
- if (avc_node_cachep)
- kmem_cache_destroy(avc_node_cachep);
+ /*
+ * If you are looking at this because you have realized that we are
+ * not destroying the avc_node_cachep it might be easy to fix, but
+ * I don't know the memory barrier semantics well enough to know. It's
+ * possible that some other task dereferenced security_ops when
+ * it still pointed to selinux operations. If that is the case it's
+ * possible that it is about to use the avc and is about to need the
+ * avc_node_cachep. I know I could wrap the security.c security_ops call
+ * in an rcu_lock, but seriously, it's not worth it. Instead I just flush
+ * the cache and get that memory back.
+ */
+ if (avc_node_cachep) {
+ avc_flush();
+ /* kmem_cache_destroy(avc_node_cachep); */
+ }
}
/* Wake up the parent if it is waiting so that it can recheck
* wait permission to the new task SID. */
read_lock(&tasklist_lock);
- wake_up_interruptible(¤t->real_parent->signal->wait_chldexit);
+ __wake_up_parent(current, current->real_parent);
read_unlock(&tasklist_lock);
}
client = i2c_new_device(adapter, &info);
if (!client)
return -ENODEV;
+ /*
+ * We know the driver is already loaded, so the device should be
+ * already bound. If not it means binding failed, and then there
+ * is no point in keeping the device instantiated.
+ */
+ if (!client->driver) {
+ i2c_unregister_device(client);
+ return -ENODEV;
+ }
/*
* Let i2c-core delete that device on driver removal.
struct snd_ac97 *ac97;
int ret;
+ writel(0, aaci->base + AC97_POWERDOWN);
/*
* Assert AACIRESET for 2us
*/
return 0;
}
-static int pxa2xx_ac97_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa2xx_ac97_suspend(struct device *dev)
{
- struct snd_card *card = platform_get_drvdata(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
int ret = 0;
if (card)
return ret;
}
-static int pxa2xx_ac97_resume(struct platform_device *dev)
+static int pxa2xx_ac97_resume(struct device *dev)
{
- struct snd_card *card = platform_get_drvdata(dev);
+ struct snd_card *card = dev_get_drvdata(dev);
int ret = 0;
if (card)
return ret;
}
-#else
-#define pxa2xx_ac97_suspend NULL
-#define pxa2xx_ac97_resume NULL
+static struct dev_pm_ops pxa2xx_ac97_pm_ops = {
+ .suspend = pxa2xx_ac97_suspend,
+ .resume = pxa2xx_ac97_resume,
+};
#endif
static int __devinit pxa2xx_ac97_probe(struct platform_device *dev)
static struct platform_driver pxa2xx_ac97_driver = {
.probe = pxa2xx_ac97_probe,
.remove = __devexit_p(pxa2xx_ac97_remove),
- .suspend = pxa2xx_ac97_suspend,
- .resume = pxa2xx_ac97_resume,
.driver = {
.name = "pxa2xx-ac97",
.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &pxa2xx_ac97_pm_ops,
+#endif
},
};
struct snd_pcm_substream *substream;
struct snd_pcm_notify *notify;
char str[16];
- struct snd_pcm *pcm = device->device_data;
+ struct snd_pcm *pcm;
struct device *dev;
- if (snd_BUG_ON(!pcm || !device))
+ if (snd_BUG_ON(!device || !device->device_data))
return -ENXIO;
+ pcm = device->device_data;
mutex_lock(®ister_mutex);
err = snd_pcm_add(pcm);
if (err) {
return 0;
}
-static struct vm_operations_struct snd_pcm_vm_ops_status =
+static const struct vm_operations_struct snd_pcm_vm_ops_status =
{
.fault = snd_pcm_mmap_status_fault,
};
return 0;
}
-static struct vm_operations_struct snd_pcm_vm_ops_control =
+static const struct vm_operations_struct snd_pcm_vm_ops_control =
{
.fault = snd_pcm_mmap_control_fault,
};
return 0;
}
-static struct vm_operations_struct snd_pcm_vm_ops_data =
+static const struct vm_operations_struct snd_pcm_vm_ops_data =
{
.open = snd_pcm_mmap_data_open,
.close = snd_pcm_mmap_data_close,
* mmap the DMA buffer on I/O memory area
*/
#if SNDRV_PCM_INFO_MMAP_IOMEM
-static struct vm_operations_struct snd_pcm_vm_ops_data_mmio =
+static const struct vm_operations_struct snd_pcm_vm_ops_data_mmio =
{
.open = snd_pcm_mmap_data_open,
.close = snd_pcm_mmap_data_close,
module_param_array(pcm_devs, int, NULL, 0444);
MODULE_PARM_DESC(pcm_devs, "PCM devices # (0-4) for dummy driver.");
module_param_array(pcm_substreams, int, NULL, 0444);
-MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-16) for dummy driver.");
+MODULE_PARM_DESC(pcm_substreams, "PCM substreams # (1-128) for dummy driver.");
//module_param_array(midi_devs, int, NULL, 0444);
//MODULE_PARM_DESC(midi_devs, "MIDI devices # (0-2) for dummy driver.");
module_param(fake_buffer, bool, 0444);
unsigned int idx;
int err;
- if (snd_BUG_ON(!dummy))
- return -EINVAL;
spin_lock_init(&dummy->mixer_lock);
strcpy(card->mixername, "Dummy Mixer");
extern int use_internal_drums;
+static void snd_opl3_note_off_unsafe(void *p, int note, int vel,
+ struct snd_midi_channel *chan);
/*
* The next table looks magical, but it certainly is not. Its values have
* been calculated as table[i]=8*log(i/64)/log(2) with an obvious exception
int again = 0;
int i;
- spin_lock_irqsave(&opl3->sys_timer_lock, flags);
+ spin_lock_irqsave(&opl3->voice_lock, flags);
for (i = 0; i < opl3->max_voices; i++) {
struct snd_opl3_voice *vp = &opl3->voices[i];
if (vp->state > 0 && vp->note_off_check) {
if (vp->note_off == jiffies)
- snd_opl3_note_off(opl3, vp->note, 0, vp->chan);
+ snd_opl3_note_off_unsafe(opl3, vp->note, 0,
+ vp->chan);
else
again++;
}
}
+ spin_unlock_irqrestore(&opl3->voice_lock, flags);
+
+ spin_lock_irqsave(&opl3->sys_timer_lock, flags);
if (again) {
opl3->tlist.expires = jiffies + 1; /* invoke again */
add_timer(&opl3->tlist);
/*
* Release a note in response to a midi note off.
*/
-void snd_opl3_note_off(void *p, int note, int vel, struct snd_midi_channel *chan)
+static void snd_opl3_note_off_unsafe(void *p, int note, int vel,
+ struct snd_midi_channel *chan)
{
struct snd_opl3 *opl3;
int voice;
struct snd_opl3_voice *vp;
- unsigned long flags;
-
opl3 = p;
#ifdef DEBUG_MIDI
chan->number, chan->midi_program, note);
#endif
- spin_lock_irqsave(&opl3->voice_lock, flags);
-
if (opl3->synth_mode == SNDRV_OPL3_MODE_SEQ) {
if (chan->drum_channel && use_internal_drums) {
snd_opl3_drum_switch(opl3, note, vel, 0, chan);
- spin_unlock_irqrestore(&opl3->voice_lock, flags);
return;
}
/* this loop will hopefully kill all extra voices, because
snd_opl3_kill_voice(opl3, voice);
}
}
+}
+
+void snd_opl3_note_off(void *p, int note, int vel,
+ struct snd_midi_channel *chan)
+{
+ struct snd_opl3 *opl3 = p;
+ unsigned long flags;
+
+ spin_lock_irqsave(&opl3->voice_lock, flags);
+ snd_opl3_note_off_unsafe(p, note, vel, chan);
spin_unlock_irqrestore(&opl3->voice_lock, flags);
}
/* write the port and returns the next expire time in ns;
* called at the trigger-start and in hrtimer callback
*/
-static unsigned long pcsp_timer_update(struct hrtimer *handle)
+static u64 pcsp_timer_update(struct snd_pcsp *chip)
{
unsigned char timer_cnt, val;
u64 ns;
struct snd_pcm_substream *substream;
struct snd_pcm_runtime *runtime;
- struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer);
unsigned long flags;
if (chip->thalf) {
outb(chip->val61, 0x61);
chip->thalf = 0;
- if (!atomic_read(&chip->timer_active))
- return 0;
return chip->ns_rem;
}
- if (!atomic_read(&chip->timer_active))
- return 0;
substream = chip->playback_substream;
if (!substream)
return 0;
return ns;
}
-enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
+static void pcsp_pointer_update(struct snd_pcsp *chip)
{
- struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer);
struct snd_pcm_substream *substream;
- int periods_elapsed, pointer_update;
size_t period_bytes, buffer_bytes;
- unsigned long ns;
+ int periods_elapsed;
unsigned long flags;
- pointer_update = !chip->thalf;
- ns = pcsp_timer_update(handle);
- if (!ns)
- return HRTIMER_NORESTART;
-
/* update the playback position */
substream = chip->playback_substream;
if (!substream)
- return HRTIMER_NORESTART;
+ return;
period_bytes = snd_pcm_lib_period_bytes(substream);
buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
if (periods_elapsed)
tasklet_schedule(&pcsp_pcm_tasklet);
+}
+
+enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
+{
+ struct snd_pcsp *chip = container_of(handle, struct snd_pcsp, timer);
+ int pointer_update;
+ u64 ns;
+
+ if (!atomic_read(&chip->timer_active) || !chip->playback_substream)
+ return HRTIMER_NORESTART;
+
+ pointer_update = !chip->thalf;
+ ns = pcsp_timer_update(chip);
+ if (!ns) {
+ printk(KERN_WARNING "PCSP: unexpected stop\n");
+ return HRTIMER_NORESTART;
+ }
+
+ if (pointer_update)
+ pcsp_pointer_update(chip);
hrtimer_forward(handle, hrtimer_get_expires(handle), ns_to_ktime(ns));
static int pcsp_start_playing(struct snd_pcsp *chip)
{
- unsigned long ns;
-
#if PCSP_DEBUG
printk(KERN_INFO "PCSP: start_playing called\n");
#endif
atomic_set(&chip->timer_active, 1);
chip->thalf = 0;
- ns = pcsp_timer_update(&pcsp_chip.timer);
- if (!ns)
- return -EIO;
-
- hrtimer_start(&pcsp_chip.timer, ktime_set(0, ns), HRTIMER_MODE_REL);
+ hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL);
return 0;
}
static int snd_pcsp_playback_prepare(struct snd_pcm_substream *substream)
{
struct snd_pcsp *chip = snd_pcm_substream_chip(substream);
+ pcsp_sync_stop(chip);
+ chip->playback_ptr = 0;
+ chip->period_ptr = 0;
+ chip->fmt_size =
+ snd_pcm_format_physical_width(substream->runtime->format) >> 3;
+ chip->is_signed = snd_pcm_format_signed(substream->runtime->format);
#if PCSP_DEBUG
printk(KERN_INFO "PCSP: prepare called, "
- "size=%zi psize=%zi f=%zi f1=%i\n",
+ "size=%zi psize=%zi f=%zi f1=%i fsize=%i\n",
snd_pcm_lib_buffer_bytes(substream),
snd_pcm_lib_period_bytes(substream),
snd_pcm_lib_buffer_bytes(substream) /
snd_pcm_lib_period_bytes(substream),
- substream->runtime->periods);
+ substream->runtime->periods,
+ chip->fmt_size);
#endif
- pcsp_sync_stop(chip);
- chip->playback_ptr = 0;
- chip->period_ptr = 0;
- chip->fmt_size =
- snd_pcm_format_physical_width(substream->runtime->format) >> 3;
- chip->is_signed = snd_pcm_format_signed(substream->runtime->format);
return 0;
}
if (treble != chip->treble) {
chip->treble = treble;
#if PCSP_DEBUG
- printk(KERN_INFO "PCSP: rate set to %i\n", PCSP_RATE());
+ printk(KERN_INFO "PCSP: rate set to %li\n", PCSP_RATE());
#endif
changed = 1;
}
return 0;
}
-static int __exit hal2_remove(struct platform_device *pdev)
+static int __devexit hal2_remove(struct platform_device *pdev)
{
struct snd_card *card = platform_get_drvdata(pdev);
return 0;
}
-static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+static int __devexit snd_sgio2audio_remove(struct platform_device *pdev)
{
struct snd_card *card = platform_get_drvdata(pdev);
struct snd_pcm *pcm;
int err;
+ if (snd_BUG_ON(!h))
+ return -EINVAL;
+
harmony_disable_interrupts(h);
err = snd_pcm_new(h->card, "harmony", 0, 1, 1, &pcm);
static int __devinit
snd_harmony_mixer_init(struct snd_harmony *h)
{
- struct snd_card *card = h->card;
+ struct snd_card *card;
int idx, err;
if (snd_BUG_ON(!h))
return -EINVAL;
+ card = h->card;
strcpy(card->mixername, "Harmony Gain control interface");
for (idx = 0; idx < HARMONY_CONTROLS; idx++) {
config SND_CS5535AUDIO
tristate "CS5535/CS5536 Audio"
- depends on X86 && !X86_64
select SND_PCM
select SND_AC97_CODEC
help
void *private_data;
snd_ali_printk("free_voice: channel=%d\n",pvoice->number);
- if (pvoice == NULL || !pvoice->use)
+ if (!pvoice->use)
return;
snd_ali_clear_voices(codec, pvoice->number, pvoice->number);
spin_lock_irq(&codec->voice_alloc);
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x1002, 0x0001, GENERIC),
/* Leadtek Winfast tv 2000xp delux */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x107d, 0x6606, GENERIC),
+ /* Pinnacle PCTV */
+ BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x11bd, 0x0012, GENERIC),
/* Voodoo TV 200 */
BT_DEVICE(PCI_DEVICE_ID_BROOKTREE_878, 0x121a, 0x3000, GENERIC),
/* Askey Computer Corp. MagicTView'99 */
static int atc_line_surround_unmute(struct ct_atc *atc, unsigned char state)
{
- return atc_daio_unmute(atc, state, LINEO4);
+ return atc_daio_unmute(atc, state, LINEO2);
}
static int atc_line_clfe_unmute(struct ct_atc *atc, unsigned char state)
static int atc_line_rear_unmute(struct ct_atc *atc, unsigned char state)
{
- return atc_daio_unmute(atc, state, LINEO2);
+ return atc_daio_unmute(atc, state, LINEO4);
}
static int atc_line_in_unmute(struct ct_atc *atc, unsigned char state)
Control interface
******************************************************************************/
-#ifndef ECHOCARD_HAS_VMIXER
+#if !defined(ECHOCARD_HAS_VMIXER) || defined(ECHOCARD_HAS_LINE_OUT_GAIN)
/******************* PCM output volume *******************/
static int snd_echo_output_gain_info(struct snd_kcontrol *kcontrol,
return changed;
}
+#ifdef ECHOCARD_HAS_LINE_OUT_GAIN
+/* On the Mia this one controls the line-out volume */
+static struct snd_kcontrol_new snd_echo_line_output_gain __devinitdata = {
+ .name = "Line Playback Volume",
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .info = snd_echo_output_gain_info,
+ .get = snd_echo_output_gain_get,
+ .put = snd_echo_output_gain_put,
+ .tlv = {.p = db_scale_output_gain},
+};
+#else
static struct snd_kcontrol_new snd_echo_pcm_output_gain __devinitdata = {
.name = "PCM Playback Volume",
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
.put = snd_echo_output_gain_put,
.tlv = {.p = db_scale_output_gain},
};
-
#endif
+#endif /* !ECHOCARD_HAS_VMIXER || ECHOCARD_HAS_LINE_OUT_GAIN */
+
#ifdef ECHOCARD_HAS_INPUT_GAIN
snd_echo_vmixer.count = num_pipes_out(chip) * num_busses_out(chip);
if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vmixer, chip))) < 0)
goto ctl_error;
-#else
- if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_pcm_output_gain, chip))) < 0)
+#ifdef ECHOCARD_HAS_LINE_OUT_GAIN
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&snd_echo_line_output_gain, chip));
+ if (err < 0)
goto ctl_error;
#endif
+#else /* ECHOCARD_HAS_VMIXER */
+ err = snd_ctl_add(chip->card,
+ snd_ctl_new1(&snd_echo_pcm_output_gain, chip));
+ if (err < 0)
+ goto ctl_error;
+#endif /* ECHOCARD_HAS_VMIXER */
#ifdef ECHOCARD_HAS_INPUT_GAIN
if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_line_input_gain, chip))) < 0)
#define ECHOCARD_HAS_ADAT FALSE
#define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
#define ECHOCARD_HAS_MIDI
+#define ECHOCARD_HAS_LINE_OUT_GAIN
/* Pipe indexes */
#define PX_ANALOG_OUT 0 /* 8 */
* white-list for enable_msi
*/
static struct snd_pci_quirk msi_white_list[] __devinitdata = {
+ SND_PCI_QUIRK(0x103c, 0x30f7, "HP Pavilion dv4t-1300", 1),
SND_PCI_QUIRK(0x103c, 0x3607, "HP Compa CQ40", 1),
{}
};
{ PCI_DEVICE(0x10de, 0x044b), .driver_data = AZX_DRIVER_NVIDIA },
{ PCI_DEVICE(0x10de, 0x055c), .driver_data = AZX_DRIVER_NVIDIA },
{ PCI_DEVICE(0x10de, 0x055d), .driver_data = AZX_DRIVER_NVIDIA },
+ { PCI_DEVICE(0x10de, 0x0590), .driver_data = AZX_DRIVER_NVIDIA },
{ PCI_DEVICE(0x10de, 0x0774), .driver_data = AZX_DRIVER_NVIDIA },
{ PCI_DEVICE(0x10de, 0x0775), .driver_data = AZX_DRIVER_NVIDIA },
{ PCI_DEVICE(0x10de, 0x0776), .driver_data = AZX_DRIVER_NVIDIA },
return 0;
}
+/*
+ * HP Touchsmart
+ * port-A (0x11) - front hp-out
+ * port-B (0x14) - unused
+ * port-C (0x15) - unused
+ * port-D (0x12) - rear line out
+ * port-E (0x1c) - front mic-in
+ * port-F (0x16) - Internal speakers
+ * digital-mic (0x17) - Internal mic
+ */
+
+static struct hda_verb ad1984a_touchsmart_verbs[] = {
+ /* DACs; unmute as default */
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ /* Port-A (HP) mixer - route only from analog mixer */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-A pin */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Port-A (HP) pin - always unmuted */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Port-E (int speaker) mixer - route only from analog mixer */
+ {0x25, AC_VERB_SET_AMP_GAIN_MUTE, 0x03},
+ /* Port-E pin */
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ /* Port-F (int speaker) mixer - route only from analog mixer */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-F pin */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Analog mixer; mute as default */
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+ /* Analog Mix output amp */
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* capture sources */
+ /* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* unsolicited event for pin-sense */
+ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ /* allow to touch GPIO1 (for mute control) */
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
+ /* internal mic - dmic */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ /* set magic COEFs for dmic */
+ {0x01, AC_VERB_SET_COEF_INDEX, 0x13f7},
+ {0x01, AC_VERB_SET_PROC_COEF, 0x08},
+ { } /* end */
+};
+
+static struct snd_kcontrol_new ad1984a_touchsmart_mixers[] = {
+ HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
+/* HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Master Playback Switch",
+ .info = snd_hda_mixer_amp_switch_info,
+ .get = snd_hda_mixer_amp_switch_get,
+ .put = ad1884a_mobile_master_sw_put,
+ .private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+ },
+ HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
+ HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
+ HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Mic Boost", 0x25, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("Internal Mic Boost", 0x17, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
+/* switch to external mic if plugged */
+static void ad1984a_touchsmart_automic(struct hda_codec *codec)
+{
+ if (snd_hda_codec_read(codec, 0x1c, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000) {
+ snd_hda_codec_write(codec, 0x0c, 0,
+ AC_VERB_SET_CONNECT_SEL, 0x4);
+ } else {
+ snd_hda_codec_write(codec, 0x0c, 0,
+ AC_VERB_SET_CONNECT_SEL, 0x5);
+ }
+}
+
+
+/* unsolicited event for HP jack sensing */
+static void ad1984a_touchsmart_unsol_event(struct hda_codec *codec,
+ unsigned int res)
+{
+ switch (res >> 26) {
+ case AD1884A_HP_EVENT:
+ ad1884a_hp_automute(codec);
+ break;
+ case AD1884A_MIC_EVENT:
+ ad1984a_touchsmart_automic(codec);
+ break;
+ }
+}
+
+/* initialize jack-sensing, too */
+static int ad1984a_touchsmart_init(struct hda_codec *codec)
+{
+ ad198x_init(codec);
+ ad1884a_hp_automute(codec);
+ ad1984a_touchsmart_automic(codec);
+ return 0;
+}
+
+
/*
*/
AD1884A_LAPTOP,
AD1884A_MOBILE,
AD1884A_THINKPAD,
+ AD1984A_TOUCHSMART,
AD1884A_MODELS
};
[AD1884A_LAPTOP] = "laptop",
[AD1884A_MOBILE] = "mobile",
[AD1884A_THINKPAD] = "thinkpad",
+ [AD1984A_TOUCHSMART] = "touchsmart",
};
static struct snd_pci_quirk ad1884a_cfg_tbl[] = {
SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x7010, "HP laptop", AD1884A_MOBILE),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
+ SND_PCI_QUIRK(0x103c, 0x2a82, "Touchsmart", AD1984A_TOUCHSMART),
{}
};
codec->patch_ops.unsol_event = ad1984a_thinkpad_unsol_event;
codec->patch_ops.init = ad1984a_thinkpad_init;
break;
+ case AD1984A_TOUCHSMART:
+ spec->mixers[0] = ad1984a_touchsmart_mixers;
+ spec->init_verbs[0] = ad1984a_touchsmart_verbs;
+ spec->multiout.dig_out_nid = 0;
+ codec->patch_ops.unsol_event = ad1984a_touchsmart_unsol_event;
+ codec->patch_ops.init = ad1984a_touchsmart_init;
+ /* set the upper-limit for mixer amp to 0dB for avoiding the
+ * possible damage by overloading
+ */
+ snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT,
+ (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+ (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+ (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+ (1 << AC_AMPCAP_MUTE_SHIFT));
+ break;
}
return 0;
};
static struct hda_input_mux cxt5045_capture_source_benq = {
- .num_items = 3,
+ .num_items = 5,
.items = {
{ "IntMic", 0x1 },
{ "ExtMic", 0x2 },
{ "LineIn", 0x3 },
+ { "CD", 0x4 },
+ { "Mixer", 0x0 },
}
};
};
static struct snd_kcontrol_new cxt5045_benq_mixers[] = {
+ HDA_CODEC_VOLUME("CD Capture Volume", 0x1a, 0x04, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Capture Switch", 0x1a, 0x04, HDA_INPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x17, 0x4, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x17, 0x4, HDA_INPUT),
+
HDA_CODEC_VOLUME("Line In Capture Volume", 0x1a, 0x03, HDA_INPUT),
HDA_CODEC_MUTE("Line In Capture Switch", 0x1a, 0x03, HDA_INPUT),
HDA_CODEC_VOLUME("Line In Playback Volume", 0x17, 0x3, HDA_INPUT),
HDA_CODEC_MUTE("Line In Playback Switch", 0x17, 0x3, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mixer Capture Volume", 0x1a, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Mixer Capture Switch", 0x1a, 0x0, HDA_INPUT),
+
{}
};
#include "hda_codec.h"
#include "hda_local.h"
+/* define below to restrict the supported rates and formats */
+/* #define LIMITED_RATE_FMT_SUPPORT */
+
struct nvhdmi_spec {
struct hda_multi_out multiout;
{} /* terminator */
};
+#ifdef LIMITED_RATE_FMT_SUPPORT
+/* support only the safe format and rate */
+#define SUPPORTED_RATES SNDRV_PCM_RATE_48000
+#define SUPPORTED_MAXBPS 16
+#define SUPPORTED_FORMATS SNDRV_PCM_FMTBIT_S16_LE
+#else
+/* support all rates and formats */
+#define SUPPORTED_RATES \
+ (SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |\
+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |\
+ SNDRV_PCM_RATE_192000)
+#define SUPPORTED_MAXBPS 24
+#define SUPPORTED_FORMATS \
+ (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
+#endif
+
/*
* Controls
*/
.channels_min = 2,
.channels_max = 8,
.nid = Nv_Master_Convert_nid,
- .rates = SNDRV_PCM_RATE_48000,
- .maxbps = 16,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SUPPORTED_RATES,
+ .maxbps = SUPPORTED_MAXBPS,
+ .formats = SUPPORTED_FORMATS,
.ops = {
.open = nvhdmi_dig_playback_pcm_open,
.close = nvhdmi_dig_playback_pcm_close_8ch,
.channels_min = 2,
.channels_max = 2,
.nid = Nv_Master_Convert_nid,
- .rates = SNDRV_PCM_RATE_48000,
- .maxbps = 16,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .rates = SUPPORTED_RATES,
+ .maxbps = SUPPORTED_MAXBPS,
+ .formats = SUPPORTED_FORMATS,
.ops = {
.open = nvhdmi_dig_playback_pcm_open,
.close = nvhdmi_dig_playback_pcm_close_2ch,
struct snd_kcontrol_new *cap_mixer; /* capture mixer */
unsigned int beep_amp; /* beep amp value, set via set_beep_amp() */
- const struct hda_verb *init_verbs[5]; /* initialization verbs
+ const struct hda_verb *init_verbs[10]; /* initialization verbs
* don't forget NULL
* termination!
*/
unsigned int nid = spec->autocfg.hp_pins[0];
int i;
+ if (!nid)
+ return;
pincap = snd_hda_query_pin_caps(codec, nid);
if (pincap & AC_PINCAP_TRIG_REQ) /* need trigger? */
snd_hda_codec_read(codec, nid, 0, AC_VERB_SET_PIN_SENSE, 0);
* when the external headphone out jack is plugged"
*/
if (!spec->autocfg.hp_pins[0]) {
+ hda_nid_t nid;
tmp = (ass >> 11) & 0x3; /* HP to chassis */
if (tmp == 0)
- spec->autocfg.hp_pins[0] = porta;
+ nid = porta;
else if (tmp == 1)
- spec->autocfg.hp_pins[0] = porte;
+ nid = porte;
else if (tmp == 2)
- spec->autocfg.hp_pins[0] = portd;
+ nid = portd;
else
return 1;
+ for (i = 0; i < spec->autocfg.line_outs; i++)
+ if (spec->autocfg.line_out_pins[i] == nid)
+ return 1;
+ spec->autocfg.hp_pins[0] = nid;
}
alc_init_auto_hp(codec);
}
/*
- * Fix-up pin default configurations
+ * Fix-up pin default configurations and add default verbs
*/
struct alc_pincfg {
u32 val;
};
-static void alc_fix_pincfg(struct hda_codec *codec,
+struct alc_fixup {
+ const struct alc_pincfg *pins;
+ const struct hda_verb *verbs;
+};
+
+static void alc_pick_fixup(struct hda_codec *codec,
const struct snd_pci_quirk *quirk,
- const struct alc_pincfg **pinfix)
+ const struct alc_fixup *fix)
{
const struct alc_pincfg *cfg;
if (!quirk)
return;
- cfg = pinfix[quirk->value];
- for (; cfg->nid; cfg++)
- snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
+ fix += quirk->value;
+ cfg = fix->pins;
+ if (cfg) {
+ for (; cfg->nid; cfg++)
+ snd_hda_codec_set_pincfg(codec, cfg->nid, cfg->val);
+ }
+ if (fix->verbs)
+ add_verb(codec->spec, fix->verbs);
}
/*
{ }
};
-static const struct alc_pincfg *alc882_pin_fixes[] = {
- [PINFIX_ABIT_AW9D_MAX] = alc882_abit_aw9d_pinfix,
+static const struct alc_fixup alc882_fixups[] = {
+ [PINFIX_ABIT_AW9D_MAX] = {
+ .pins = alc882_abit_aw9d_pinfix
+ },
};
-static struct snd_pci_quirk alc882_pinfix_tbl[] = {
+static struct snd_pci_quirk alc882_fixup_tbl[] = {
SND_PCI_QUIRK(0x147b, 0x107a, "Abit AW9D-MAX", PINFIX_ABIT_AW9D_MAX),
{}
};
board_config = ALC882_AUTO;
}
- alc_fix_pincfg(codec, alc882_pinfix_tbl, alc882_pin_fixes);
+ alc_pick_fixup(codec, alc882_fixup_tbl, alc882_fixups);
if (board_config == ALC882_AUTO) {
/* automatic parse from the BIOS config */
SND_PCI_QUIRK(0x1025, 0x015b, "Acer Aspire One",
ALC268_ACER_ASPIRE_ONE),
SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
- SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
+ SND_PCI_QUIRK_MASK(0x1028, 0xfff0, 0x02b0,
+ "Dell Inspiron Mini9/Vostro A90", ALC268_DELL),
/* almost compatible with toshiba but with optional digital outs;
* auto-probing seems working fine
*/
.init_hook = alc268_toshiba_automute,
},
[ALC268_ACER] = {
- .mixers = { alc268_acer_mixer, alc268_capture_nosrc_mixer,
+ .mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
alc268_beep_mixer },
.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
alc268_acer_verbs },
unsigned int wcap = get_wcaps(codec, 0x07);
int i;
+ spec->capsrc_nids = alc268_capsrc_nids;
/* get type */
wcap = get_wcaps_type(wcap);
if (spec->auto_mic ||
wcap != AC_WID_AUD_IN || spec->input_mux->num_items == 1) {
spec->adc_nids = alc268_adc_nids_alt;
spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids_alt);
+ if (spec->auto_mic)
+ fixup_automic_adc(codec);
if (spec->auto_mic || spec->input_mux->num_items == 1)
add_mixer(spec, alc268_capture_nosrc_mixer);
else
spec->num_adc_nids = ARRAY_SIZE(alc268_adc_nids);
add_mixer(spec, alc268_capture_mixer);
}
- spec->capsrc_nids = alc268_capsrc_nids;
/* set default input source */
for (i = 0; i < spec->num_adc_nids; i++)
snd_hda_codec_write_cache(codec, alc268_capsrc_nids[i],
static void alc861_auto_init_hp_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
- hda_nid_t pin;
- pin = spec->autocfg.hp_pins[0];
- if (pin)
- alc861_auto_set_output_and_unmute(codec, pin, PIN_HP,
+ if (spec->autocfg.hp_outs)
+ alc861_auto_set_output_and_unmute(codec,
+ spec->autocfg.hp_pins[0],
+ PIN_HP,
spec->multiout.hp_nid);
- pin = spec->autocfg.speaker_pins[0];
- if (pin)
- alc861_auto_set_output_and_unmute(codec, pin, PIN_OUT,
+ if (spec->autocfg.speaker_outs)
+ alc861_auto_set_output_and_unmute(codec,
+ spec->autocfg.speaker_pins[0],
+ PIN_OUT,
spec->multiout.dac_nids[0]);
}
SND_PCI_QUIRK(0x1019, 0xa88d, "Realtek ALC660 demo", ALC660VD_3ST),
SND_PCI_QUIRK(0x103c, 0x30bf, "HP TX1000", ALC861VD_HP),
SND_PCI_QUIRK(0x1043, 0x12e2, "Asus z35m", ALC660VD_3ST),
- SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),
+ /*SND_PCI_QUIRK(0x1043, 0x1339, "Asus G1", ALC660VD_3ST),*/ /* auto */
SND_PCI_QUIRK(0x1043, 0x1633, "Asus V1Sn", ALC660VD_ASUS_V1S),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS", ALC660VD_3ST_DIG),
SND_PCI_QUIRK(0x10de, 0x03f0, "Realtek ALC660 demo", ALC660VD_3ST),
alc_inithook(codec);
}
+enum {
+ ALC660VD_FIX_ASUS_GPIO1
+};
+
+/* reset GPIO1 */
+static const struct hda_verb alc660vd_fix_asus_gpio1_verbs[] = {
+ {0x01, AC_VERB_SET_GPIO_MASK, 0x03},
+ {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
+ {0x01, AC_VERB_SET_GPIO_DATA, 0x01},
+ { }
+};
+
+static const struct alc_fixup alc861vd_fixups[] = {
+ [ALC660VD_FIX_ASUS_GPIO1] = {
+ .verbs = alc660vd_fix_asus_gpio1_verbs,
+ },
+};
+
+static struct snd_pci_quirk alc861vd_fixup_tbl[] = {
+ SND_PCI_QUIRK(0x1043, 0x1339, "ASUS A7-K", ALC660VD_FIX_ASUS_GPIO1),
+ {}
+};
+
static int patch_alc861vd(struct hda_codec *codec)
{
struct alc_spec *spec;
board_config = ALC861VD_AUTO;
}
+ alc_pick_fixup(codec, alc861vd_fixup_tbl, alc861vd_fixups);
+
if (board_config == ALC861VD_AUTO) {
/* automatic parse from the BIOS config */
err = alc861vd_parse_auto_config(codec);
SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
ALC662_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
* BIOS auto configuration
*/
+/* convert from MIX nid to DAC */
+static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid)
+{
+ if (nid == 0x0f)
+ return 0x02;
+ else if (nid >= 0x0c && nid <= 0x0e)
+ return nid - 0x0c + 0x02;
+ else
+ return 0;
+}
+
+/* get MIX nid connected to the given pin targeted to DAC */
+static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin,
+ hda_nid_t dac)
+{
+ hda_nid_t mix[4];
+ int i, num;
+
+ num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix));
+ for (i = 0; i < num; i++) {
+ if (alc662_mix_to_dac(mix[i]) == dac)
+ return mix[i];
+ }
+ return 0;
+}
+
+/* look for an empty DAC slot */
+static hda_nid_t alc662_look_for_dac(struct hda_codec *codec, hda_nid_t pin)
+{
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t srcs[5];
+ int i, j, num;
+
+ num = snd_hda_get_connections(codec, pin, srcs, ARRAY_SIZE(srcs));
+ if (num < 0)
+ return 0;
+ for (i = 0; i < num; i++) {
+ hda_nid_t nid = alc662_mix_to_dac(srcs[i]);
+ if (!nid)
+ continue;
+ for (j = 0; j < spec->multiout.num_dacs; j++)
+ if (spec->multiout.dac_nids[j] == nid)
+ break;
+ if (j >= spec->multiout.num_dacs)
+ return nid;
+ }
+ return 0;
+}
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int alc662_auto_fill_dac_nids(struct hda_codec *codec,
+ const struct auto_pin_cfg *cfg)
+{
+ struct alc_spec *spec = codec->spec;
+ int i;
+ hda_nid_t dac;
+
+ spec->multiout.dac_nids = spec->private_dac_nids;
+ for (i = 0; i < cfg->line_outs; i++) {
+ dac = alc662_look_for_dac(codec, cfg->line_out_pins[i]);
+ if (!dac)
+ continue;
+ spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
+ }
+ return 0;
+}
+
+static int alc662_add_vol_ctl(struct alc_spec *spec, const char *pfx,
+ hda_nid_t nid, unsigned int chs)
+{
+ char name[32];
+ sprintf(name, "%s Playback Volume", pfx);
+ return add_control(spec, ALC_CTL_WIDGET_VOL, name,
+ HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
+}
+
+static int alc662_add_sw_ctl(struct alc_spec *spec, const char *pfx,
+ hda_nid_t nid, unsigned int chs)
+{
+ char name[32];
+ sprintf(name, "%s Playback Switch", pfx);
+ return add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_INPUT));
+}
+
+#define alc662_add_stereo_vol(spec, pfx, nid) \
+ alc662_add_vol_ctl(spec, pfx, nid, 3)
+#define alc662_add_stereo_sw(spec, pfx, nid) \
+ alc662_add_sw_ctl(spec, pfx, nid, 3)
+
/* add playback controls from the parsed DAC table */
-static int alc662_auto_create_multi_out_ctls(struct alc_spec *spec,
+static int alc662_auto_create_multi_out_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- char name[32];
+ struct alc_spec *spec = codec->spec;
static const char *chname[4] = {
"Front", "Surround", NULL /*CLFE*/, "Side"
};
- hda_nid_t nid;
+ hda_nid_t nid, mix;
int i, err;
for (i = 0; i < cfg->line_outs; i++) {
- if (!spec->multiout.dac_nids[i])
+ nid = spec->multiout.dac_nids[i];
+ if (!nid)
+ continue;
+ mix = alc662_dac_to_mix(codec, cfg->line_out_pins[i], nid);
+ if (!mix)
continue;
- nid = alc880_idx_to_dac(i);
if (i == 2) {
/* Center/LFE */
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "Center Playback Volume",
- HDA_COMPOSE_AMP_VAL(nid, 1, 0,
- HDA_OUTPUT));
+ err = alc662_add_vol_ctl(spec, "Center", nid, 1);
if (err < 0)
return err;
- err = add_control(spec, ALC_CTL_WIDGET_VOL,
- "LFE Playback Volume",
- HDA_COMPOSE_AMP_VAL(nid, 2, 0,
- HDA_OUTPUT));
+ err = alc662_add_vol_ctl(spec, "LFE", nid, 2);
if (err < 0)
return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "Center Playback Switch",
- HDA_COMPOSE_AMP_VAL(0x0e, 1, 0,
- HDA_INPUT));
+ err = alc662_add_sw_ctl(spec, "Center", mix, 1);
if (err < 0)
return err;
- err = add_control(spec, ALC_CTL_WIDGET_MUTE,
- "LFE Playback Switch",
- HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
- HDA_INPUT));
+ err = alc662_add_sw_ctl(spec, "LFE", mix, 2);
if (err < 0)
return err;
} else {
const char *pfx;
if (cfg->line_outs == 1 &&
cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
- if (!cfg->hp_pins)
+ if (cfg->hp_outs)
pfx = "Speaker";
else
pfx = "PCM";
} else
pfx = chname[i];
- sprintf(name, "%s Playback Volume", pfx);
- err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0,
- HDA_OUTPUT));
+ err = alc662_add_vol_ctl(spec, pfx, nid, 3);
if (err < 0)
return err;
if (cfg->line_outs == 1 &&
cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
pfx = "Speaker";
- sprintf(name, "%s Playback Switch", pfx);
- err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
- HDA_COMPOSE_AMP_VAL(alc880_idx_to_mixer(i),
- 3, 0, HDA_INPUT));
+ err = alc662_add_sw_ctl(spec, pfx, mix, 3);
if (err < 0)
return err;
}
}
/* add playback controls for speaker and HP outputs */
-static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
+/* return DAC nid if any new DAC is assigned */
+static int alc662_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin,
const char *pfx)
{
- hda_nid_t nid;
+ struct alc_spec *spec = codec->spec;
+ hda_nid_t nid, mix;
int err;
- char name[32];
if (!pin)
return 0;
-
- if (pin == 0x17) {
- /* ALC663 has a mono output pin on 0x17 */
+ nid = alc662_look_for_dac(codec, pin);
+ if (!nid) {
+ char name[32];
+ /* the corresponding DAC is already occupied */
+ if (!(get_wcaps(codec, pin) & AC_WCAP_OUT_AMP))
+ return 0; /* no way */
+ /* create a switch only */
sprintf(name, "%s Playback Switch", pfx);
- err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
- HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT));
- return err;
+ return add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+ HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
}
- if (alc880_is_fixed_pin(pin)) {
- nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
- /* printk(KERN_DEBUG "DAC nid=%x\n",nid); */
- /* specify the DAC as the extra output */
- if (!spec->multiout.hp_nid)
- spec->multiout.hp_nid = nid;
- else
- spec->multiout.extra_out_nid[0] = nid;
- /* control HP volume/switch on the output mixer amp */
- nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
- sprintf(name, "%s Playback Volume", pfx);
- err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- sprintf(name, "%s Playback Switch", pfx);
- err = add_control(spec, ALC_CTL_BIND_MUTE, name,
- HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT));
- if (err < 0)
- return err;
- } else if (alc880_is_multi_pin(pin)) {
- /* set manual connection */
- /* we have only a switch on HP-out PIN */
- sprintf(name, "%s Playback Switch", pfx);
- err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
- HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
- if (err < 0)
- return err;
- }
- return 0;
+ mix = alc662_dac_to_mix(codec, pin, nid);
+ if (!mix)
+ return 0;
+ err = alc662_add_vol_ctl(spec, pfx, nid, 3);
+ if (err < 0)
+ return err;
+ err = alc662_add_sw_ctl(spec, pfx, mix, 3);
+ if (err < 0)
+ return err;
+ return nid;
}
/* create playback/capture controls for input pins */
#define alc662_auto_create_input_ctls \
- alc880_auto_create_input_ctls
+ alc882_auto_create_input_ctls
static void alc662_auto_set_output_and_unmute(struct hda_codec *codec,
hda_nid_t nid, int pin_type,
- int dac_idx)
+ hda_nid_t dac)
{
+ int i, num;
+ hda_nid_t srcs[4];
+
alc_set_pin_output(codec, nid, pin_type);
/* need the manual connection? */
- if (alc880_is_multi_pin(nid)) {
- struct alc_spec *spec = codec->spec;
- int idx = alc880_multi_pin_idx(nid);
- snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0,
- AC_VERB_SET_CONNECT_SEL,
- alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx]));
+ num = snd_hda_get_connections(codec, nid, srcs, ARRAY_SIZE(srcs));
+ if (num <= 1)
+ return;
+ for (i = 0; i < num; i++) {
+ if (alc662_mix_to_dac(srcs[i]) != dac)
+ continue;
+ snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, i);
+ return;
}
}
static void alc662_auto_init_multi_out(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
+ int pin_type = get_pin_type(spec->autocfg.line_out_type);
int i;
for (i = 0; i <= HDA_SIDE; i++) {
hda_nid_t nid = spec->autocfg.line_out_pins[i];
- int pin_type = get_pin_type(spec->autocfg.line_out_type);
if (nid)
alc662_auto_set_output_and_unmute(codec, nid, pin_type,
- i);
+ spec->multiout.dac_nids[i]);
}
}
hda_nid_t pin;
pin = spec->autocfg.hp_pins[0];
- if (pin) /* connect to front */
- /* use dac 0 */
- alc662_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+ if (pin)
+ alc662_auto_set_output_and_unmute(codec, pin, PIN_HP,
+ spec->multiout.hp_nid);
pin = spec->autocfg.speaker_pins[0];
if (pin)
- alc662_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
+ alc662_auto_set_output_and_unmute(codec, pin, PIN_OUT,
+ spec->multiout.extra_out_nid[0]);
}
#define ALC662_PIN_CD_NID ALC880_PIN_CD_NID
if (!spec->autocfg.line_outs)
return 0; /* can't find valid BIOS pin config */
- err = alc880_auto_fill_dac_nids(spec, &spec->autocfg);
+ err = alc662_auto_fill_dac_nids(codec, &spec->autocfg);
if (err < 0)
return err;
- err = alc662_auto_create_multi_out_ctls(spec, &spec->autocfg);
+ err = alc662_auto_create_multi_out_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
- err = alc662_auto_create_extra_out(spec,
+ err = alc662_auto_create_extra_out(codec,
spec->autocfg.speaker_pins[0],
"Speaker");
if (err < 0)
return err;
- err = alc662_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
+ if (err)
+ spec->multiout.extra_out_nid[0] = err;
+ err = alc662_auto_create_extra_out(codec, spec->autocfg.hp_pins[0],
"Headphone");
if (err < 0)
return err;
+ if (err)
+ spec->multiout.hp_nid = err;
err = alc662_auto_create_input_ctls(codec, &spec->autocfg);
if (err < 0)
return err;
STAC_D965_5ST_NO_FP,
STAC_DELL_3ST,
STAC_DELL_BIOS,
+ STAC_927X_VOLKNOB,
STAC_927X_MODELS
};
struct sigmatel_mic_route {
hda_nid_t pin;
- unsigned char mux_idx;
- unsigned char dmux_idx;
+ signed char mux_idx;
+ signed char dmux_idx;
};
struct sigmatel_spec {
{}
};
+static struct hda_verb dell_3st_core_init[] = {
+ /* don't set delta bit */
+ {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f},
+ /* unmute node 0x1b */
+ {0x1b, AC_VERB_SET_AMP_GAIN_MUTE, 0xb000},
+ /* select node 0x03 as DAC */
+ {0x0b, AC_VERB_SET_CONNECT_SEL, 0x01},
+ {}
+};
+
static struct hda_verb stac927x_core_init[] = {
/* set master volume and direct control */
{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
{}
};
+static struct hda_verb stac927x_volknob_core_init[] = {
+ /* don't set delta bit */
+ {0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0x7f},
+ /* enable analog pc beep path */
+ {0x01, AC_VERB_SET_DIGI_CONVERT_2, 1 << 5},
+ {}
+};
+
static struct hda_verb stac9205_core_init[] = {
/* set master volume and direct control */
{ 0x24, AC_VERB_SET_VOLUME_KNOB_CONTROL, 0xff},
[STAC_D965_5ST_NO_FP] = d965_5st_no_fp_pin_configs,
[STAC_DELL_3ST] = dell_3st_pin_configs,
[STAC_DELL_BIOS] = NULL,
+ [STAC_927X_VOLKNOB] = NULL,
};
static const char *stac927x_models[STAC_927X_MODELS] = {
[STAC_D965_5ST_NO_FP] = "5stack-no-fp",
[STAC_DELL_3ST] = "dell-3stack",
[STAC_DELL_BIOS] = "dell-bios",
+ [STAC_927X_VOLKNOB] = "volknob",
};
static struct snd_pci_quirk stac927x_cfg_tbl[] = {
"Intel D965", STAC_D965_5ST),
SND_PCI_QUIRK_MASK(PCI_VENDOR_ID_INTEL, 0xff00, 0x2500,
"Intel D965", STAC_D965_5ST),
+ /* volume-knob fixes */
+ SND_PCI_QUIRK_VENDOR(0x10cf, "FSC", STAC_927X_VOLKNOB),
{} /* terminator */
};
break;
if (i <= AUTO_PIN_FRONT_MIC) {
/* analog pin */
- mic->dmux_idx = 0;
i = get_connection_index(codec, spec->mux_nids[0], pin);
if (i < 0)
return -1;
mic->mux_idx = i;
+ mic->dmux_idx = -1;
+ if (spec->dmux_nids)
+ mic->dmux_idx = get_connection_index(codec,
+ spec->dmux_nids[0],
+ spec->mux_nids[0]);
} else if (spec->dmux_nids) {
/* digital pin */
- mic->mux_idx = 0;
i = get_connection_index(codec, spec->dmux_nids[0], pin);
if (i < 0)
return -1;
mic->dmux_idx = i;
+ mic->mux_idx = -1;
+ if (spec->mux_nids)
+ mic->mux_idx = get_connection_index(codec,
+ spec->mux_nids[0],
+ spec->dmux_nids[0]);
}
return 0;
}
mic = &spec->ext_mic;
else
mic = &spec->int_mic;
- if (mic->dmux_idx)
+ if (mic->dmux_idx >= 0)
snd_hda_codec_write_cache(codec, spec->dmux_nids[0], 0,
AC_VERB_SET_CONNECT_SEL,
mic->dmux_idx);
- else
+ if (mic->mux_idx >= 0)
snd_hda_codec_write_cache(codec, spec->mux_nids[0], 0,
AC_VERB_SET_CONNECT_SEL,
mic->mux_idx);
spec->dmic_nids = stac927x_dmic_nids;
spec->num_dmics = STAC927X_NUM_DMICS;
- spec->init = d965_core_init;
+ spec->init = dell_3st_core_init;
spec->dmux_nids = stac927x_dmux_nids;
spec->num_dmuxes = ARRAY_SIZE(stac927x_dmux_nids);
break;
+ case STAC_927X_VOLKNOB:
+ spec->num_dmics = 0;
+ spec->init = stac927x_volknob_core_init;
+ break;
default:
spec->num_dmics = 0;
spec->init = stac927x_core_init;
/* only use basic functionality for now */
- ice->num_total_dacs = 2; /* only PSDOUT0 is connected */
+ /* VT1616 6ch codec connected to PSDOUT0 using packed mode */
+ ice->num_total_dacs = 6;
ice->num_total_adcs = 2;
- /* Chaintech AV-710 has another codecs, which need initialization */
- /* initialize WM8728 codec */
+ /* Chaintech AV-710 has another WM8728 codec connected to PSDOUT4
+ (shared with the SPDIF output). Mixer control for this codec
+ is not yet supported. */
if (ice->eeprom.subvendor == VT1724_SUBDEVICE_AV710) {
for (i = 0; i < ARRAY_SIZE(wm_inits); i += 2)
wm_put(ice, wm_inits[i], wm_inits[i+1]);
}
static struct snd_kcontrol_new snd_ice1712_mixer_pro_peak __devinitdata = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = "Multi Track Peak",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_ice1712_pro_peak_info,
(inb(ICEMT1724(ice, DMA_PAUSE)) & DMA_PAUSES)) {
/* running? we cannot change the rate now... */
spin_unlock_irqrestore(&ice->reg_lock, flags);
- return -EBUSY;
+ return ((rate == ice->cur_rate) && !force) ? 0 : -EBUSY;
}
if (!force && is_pro_rate_locked(ice)) {
spin_unlock_irqrestore(&ice->reg_lock, flags);
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
snd_dma_pci_data(ice->pci),
- 64*1024, 64*1024);
+ 256*1024, 256*1024);
ice->pcm = pcm;
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV,
snd_dma_pci_data(ice->pci),
- 64*1024, 64*1024);
+ 256*1024, 256*1024);
ice->pcm_ds = pcm;
}
static struct snd_kcontrol_new snd_vt1724_mixer_pro_peak __devinitdata = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
.name = "Multi Track Peak",
.access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
.info = snd_vt1724_pro_peak_info,
.name = "Sony S1XP",
.type = AC97_TUNE_INV_EAPD
},
+ {
+ .subvendor = 0x104d,
+ .subdevice = 0x81c0,
+ .name = "Sony VAIO VGN-T350P", /*AD1981B*/
+ .type = AC97_TUNE_INV_EAPD
+ },
+ {
+ .subvendor = 0x104d,
+ .subdevice = 0x81c5,
+ .name = "Sony VAIO VGN-B1VP", /*AD1981B*/
+ .type = AC97_TUNE_INV_EAPD
+ },
{
.subvendor = 0x1043,
.subdevice = 0x80f3,
struct snd_pcm *pcms[2];
struct snd_rawmidi *rmidi;
+ struct snd_kcontrol *dxs_controls[4];
struct snd_ac97_bus *ac97_bus;
struct snd_ac97 *ac97;
/*
- * open callback for playback on via686 and via823x DSX
+ * open callback for playback on via686
*/
-static int snd_via82xx_playback_open(struct snd_pcm_substream *substream)
+static int snd_via686_playback_open(struct snd_pcm_substream *substream)
{
struct via82xx *chip = snd_pcm_substream_chip(substream);
struct viadev *viadev = &chip->devs[chip->playback_devno + substream->number];
return 0;
}
+/*
+ * open callback for playback on via823x DXS
+ */
+static int snd_via8233_playback_open(struct snd_pcm_substream *substream)
+{
+ struct via82xx *chip = snd_pcm_substream_chip(substream);
+ struct viadev *viadev;
+ unsigned int stream;
+ int err;
+
+ viadev = &chip->devs[chip->playback_devno + substream->number];
+ if ((err = snd_via82xx_pcm_open(chip, viadev, substream)) < 0)
+ return err;
+ stream = viadev->reg_offset / 0x10;
+ if (chip->dxs_controls[stream]) {
+ chip->playback_volume[stream][0] = 0;
+ chip->playback_volume[stream][1] = 0;
+ chip->dxs_controls[stream]->vd[0].access &=
+ ~SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+ snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE |
+ SNDRV_CTL_EVENT_MASK_INFO,
+ &chip->dxs_controls[stream]->id);
+ }
+ return 0;
+}
+
/*
* open callback for playback on via823x multi-channel
*/
return 0;
}
+static int snd_via8233_playback_close(struct snd_pcm_substream *substream)
+{
+ struct via82xx *chip = snd_pcm_substream_chip(substream);
+ struct viadev *viadev = substream->runtime->private_data;
+ unsigned int stream;
+
+ stream = viadev->reg_offset / 0x10;
+ if (chip->dxs_controls[stream]) {
+ chip->dxs_controls[stream]->vd[0].access |=
+ SNDRV_CTL_ELEM_ACCESS_INACTIVE;
+ snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_INFO,
+ &chip->dxs_controls[stream]->id);
+ }
+ return snd_via82xx_pcm_close(substream);
+}
+
/* via686 playback callbacks */
static struct snd_pcm_ops snd_via686_playback_ops = {
- .open = snd_via82xx_playback_open,
+ .open = snd_via686_playback_open,
.close = snd_via82xx_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_via82xx_hw_params,
/* via823x DSX playback callbacks */
static struct snd_pcm_ops snd_via8233_playback_ops = {
- .open = snd_via82xx_playback_open,
- .close = snd_via82xx_pcm_close,
+ .open = snd_via8233_playback_open,
+ .close = snd_via8233_playback_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = snd_via82xx_hw_params,
.hw_free = snd_via82xx_hw_free,
struct snd_ctl_elem_value *ucontrol)
{
struct via82xx *chip = snd_kcontrol_chip(kcontrol);
- unsigned int idx = snd_ctl_get_ioff(kcontrol, &ucontrol->id);
+ unsigned int idx = kcontrol->id.subdevice;
ucontrol->value.integer.value[0] = VIA_DXS_MAX_VOLUME - chip->playback_volume[idx][0];
ucontrol->value.integer.value[1] = VIA_DXS_MAX_VOLUME - chip->playback_volume[idx][1];
struct snd_ctl_elem_value *ucontrol)
{
struct via82xx *chip = snd_kcontrol_chip(kcontrol);
- unsigned int idx = snd_ctl_get_ioff(kcontrol, &ucontrol->id);
+ unsigned int idx = kcontrol->id.subdevice;
unsigned long port = chip->port + 0x10 * idx;
unsigned char val;
int i, change = 0;
};
static struct snd_kcontrol_new snd_via8233_dxs_volume_control __devinitdata = {
- .name = "VIA DXS Playback Volume",
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .access = (SNDRV_CTL_ELEM_ACCESS_READWRITE |
- SNDRV_CTL_ELEM_ACCESS_TLV_READ),
- .count = 4,
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .device = 0,
+ /* .subdevice set later */
+ .name = "PCM Playback Volume",
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ |
+ SNDRV_CTL_ELEM_ACCESS_INACTIVE,
.info = snd_via8233_dxs_volume_info,
.get = snd_via8233_dxs_volume_get,
.put = snd_via8233_dxs_volume_put,
}
else /* Using DXS when PCM emulation is enabled is really weird */
{
- /* Standalone DXS controls */
- err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_via8233_dxs_volume_control, chip));
- if (err < 0)
- return err;
+ for (i = 0; i < 4; ++i) {
+ struct snd_kcontrol *kctl;
+
+ kctl = snd_ctl_new1(
+ &snd_via8233_dxs_volume_control, chip);
+ if (!kctl)
+ return -ENOMEM;
+ kctl->id.subdevice = i;
+ err = snd_ctl_add(chip->card, kctl);
+ if (err < 0)
+ return err;
+ chip->dxs_controls[i] = kctl;
+ }
}
}
/* select spdif data slot 10/11 */
* configuration callback
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int pdacf_config(struct pcmcia_device *link)
{
struct snd_pdacf *pdacf = link->priv;
- int last_fn, last_ret;
+ int ret;
snd_printdd(KERN_DEBUG "pdacf_config called\n");
link->conf.ConfigIndex = 0x5;
- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_io(link, &link->io);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
if (snd_pdacf_assign_resources(pdacf, link->io.BasePort1, link->irq.AssignedIRQ) < 0)
goto failed;
link->dev_node = &pdacf->node;
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
pcmcia_disable_device(link);
return -ENODEV;
* configuration callback
*/
-#define CS_CHECK(fn, ret) \
-do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
-
static int vxpocket_config(struct pcmcia_device *link)
{
struct vx_core *chip = link->priv;
struct snd_vxpocket *vxp = (struct snd_vxpocket *)chip;
- int last_fn, last_ret;
+ int ret;
snd_printdd(KERN_DEBUG "vxpocket_config called\n");
strcpy(chip->card->driver, vxp440_hw.name);
}
- CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
- CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
- CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
+ ret = pcmcia_request_io(link, &link->io);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, &link->irq);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_request_configuration(link, &link->conf);
+ if (ret)
+ goto failed;
chip->dev = &handle_to_dev(link);
snd_card_set_dev(chip->card, chip->dev);
link->dev_node = &vxp->node;
return 0;
-cs_failed:
- cs_error(link, last_fn, last_ret);
failed:
pcmcia_disable_device(link);
return -ENODEV;
menuconfig SND_PPC
bool "PowerPC sound devices"
- depends on PPC64 || PPC32
+ depends on PPC
default y
help
Support for sound devices specific to PowerPC architectures.
strlcpy(info.type, "keywest", I2C_NAME_SIZE);
info.addr = keywest_ctx->addr;
keywest_ctx->client = i2c_new_device(adapter, &info);
+ if (!keywest_ctx->client)
+ return -ENODEV;
+ /*
+ * We know the driver is already loaded, so the device should be
+ * already bound. If not it means binding failed, and then there
+ * is no point in keeping the device instantiated.
+ */
+ if (!keywest_ctx->client->driver) {
+ i2c_unregister_device(keywest_ctx->client);
+ keywest_ctx->client = NULL;
+ return -ENODEV;
+ }
/*
* Let i2c-core delete that device on driver removal.
{ }
};
-struct i2c_driver keywest_driver = {
+static struct i2c_driver keywest_driver = {
.driver = {
.name = "PMac Keywest Audio",
},
mode (supports single stereo In/Out).
You will also need to select the audio interfaces to support below.
-config SND_BF5XX_TDM
- tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
- depends on (BLACKFIN && SND_SOC)
- help
- Say Y or M if you want to add support for codecs attached to
- the Blackfin SPORT (synchronous serial ports) interface in TDM
- mode.
- You will also need to select the audio interfaces to support below.
-
config SND_BF5XX_SOC_SSM2602
tristate "SoC SSM2602 Audio support for BF52x ezkit"
depends on SND_BF5XX_I2S
Enter the GPIO used to control AD73311's SE pin. Acceptable
values are 0 to 7
+config SND_BF5XX_TDM
+ tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
+ depends on (BLACKFIN && SND_SOC)
+ help
+ Say Y or M if you want to add support for codecs attached to
+ the Blackfin SPORT (synchronous serial ports) interface in TDM
+ mode.
+ You will also need to select the audio interfaces to support below.
+
+config SND_BF5XX_SOC_AD1836
+ tristate "SoC AD1836 Audio support for BF5xx"
+ depends on SND_BF5XX_TDM
+ select SND_BF5XX_SOC_TDM
+ select SND_SOC_AD1836
+ help
+ Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+config SND_BF5XX_SOC_AD1938
+ tristate "SoC AD1938 Audio support for Blackfin"
+ depends on SND_BF5XX_TDM
+ select SND_BF5XX_SOC_TDM
+ select SND_SOC_AD1938
+ help
+ Say Y if you want to add support for AD1938 codec on Blackfin.
+
config SND_BF5XX_AC97
tristate "SoC AC97 Audio for the ADI BF5xx chip"
depends on BLACKFIN
Say y if you want AC97 driver to support up to 5.1 channel audio.
this mode will consume much more memory for DMA.
+config SND_BF5XX_HAVE_COLD_RESET
+ bool "BOARD has COLD Reset GPIO"
+ depends on SND_BF5XX_AC97
+ default y if BFIN548_EZKIT
+ default n if !BFIN548_EZKIT
+
+config SND_BF5XX_RESET_GPIO_NUM
+ int "Set a GPIO for cold reset"
+ depends on SND_BF5XX_HAVE_COLD_RESET
+ range 0 159
+ default 19 if BFIN548_EZKIT
+ default 5 if BFIN537_STAMP
+ default 0
+ help
+ Set the correct GPIO for RESET the sound chip.
+
+config SND_BF5XX_SOC_AD1980
+ tristate "SoC AD1980/1 Audio support for BF5xx"
+ depends on SND_BF5XX_AC97
+ select SND_BF5XX_SOC_AC97
+ select SND_SOC_AD1980
+ help
+ Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
config SND_BF5XX_SOC_SPORT
tristate
select SND_SOC_AC97_BUS
select SND_BF5XX_SOC_SPORT
-config SND_BF5XX_SOC_AD1836
- tristate "SoC AD1836 Audio support for BF5xx"
- depends on SND_BF5XX_TDM
- select SND_BF5XX_SOC_TDM
- select SND_SOC_AD1836
- help
- Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1980
- tristate "SoC AD1980/1 Audio support for BF5xx"
- depends on SND_BF5XX_AC97
- select SND_BF5XX_SOC_AC97
- select SND_SOC_AD1980
- help
- Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1938
- tristate "SoC AD1938 Audio support for Blackfin"
- depends on SND_BF5XX_TDM
- select SND_BF5XX_SOC_TDM
- select SND_SOC_AD1938
- help
- Say Y if you want to add support for AD1938 codec on Blackfin.
-
config SND_BF5XX_SPORT_NUM
int "Set a SPORT for Sound chip"
depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
default 0
help
Set the correct SPORT for sound chip.
-
-config SND_BF5XX_HAVE_COLD_RESET
- bool "BOARD has COLD Reset GPIO"
- depends on SND_BF5XX_AC97
- default y if BFIN548_EZKIT
- default n if !BFIN548_EZKIT
-
-config SND_BF5XX_RESET_GPIO_NUM
- int "Set a GPIO for cold reset"
- depends on SND_BF5XX_HAVE_COLD_RESET
- range 0 159
- default 19 if BFIN548_EZKIT
- default 5 if BFIN537_STAMP
- default 0
- help
- Set the correct GPIO for RESET the sound chip.
* TFS. When Port G is selected and EMAC then there is a conflict between
* the PHY interrupt line and TFS. Current settings prevent the conflict
* by ignoring the TFS pin when Port G is selected. This allows both
- * ssm2602 using Port G and EMAC concurrently.
+ * codecs and EMAC using Port G concurrently.
*/
-#ifdef CONFIG_BF527_SPORT0_PORTF
-#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
-#else
+#ifdef CONFIG_BF527_SPORT0_PORTG
#define LOCAL_SPORT0_TFS (0)
+#else
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
#endif
static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
* TFS. When Port G is selected and EMAC then there is a conflict between
* the PHY interrupt line and TFS. Current settings prevent the conflict
* by ignoring the TFS pin when Port G is selected. This allows both
- * ssm2602 using Port G and EMAC concurrently.
+ * codecs and EMAC using Port G concurrently.
*/
-#ifdef CONFIG_BF527_SPORT0_PORTF
-#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
-#else
+#ifdef CONFIG_BF527_SPORT0_PORTG
#define LOCAL_SPORT0_TFS (0)
+#else
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
#endif
static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
SOC_DAPM_SINGLE_TLV("L3 Capture Volume",
WM8350_INPUT_MIXER_VOLUME_L, 9, 7, 0, out_mix_tlv),
SOC_DAPM_SINGLE("PGA Capture Switch",
- WM8350_LEFT_INPUT_VOLUME, 14, 1, 0),
+ WM8350_LEFT_INPUT_VOLUME, 14, 1, 1),
};
/* Right Input Mixer */
SOC_DAPM_SINGLE_TLV("L3 Capture Volume",
WM8350_INPUT_MIXER_VOLUME_R, 13, 7, 0, out_mix_tlv),
SOC_DAPM_SINGLE("PGA Capture Switch",
- WM8350_RIGHT_INPUT_VOLUME, 14, 1, 0),
+ WM8350_RIGHT_INPUT_VOLUME, 14, 1, 1),
};
/* Left Mic Mixer */
codec->reg_cache = &wm8940->reg_cache;
ret = snd_soc_codec_set_cache_io(codec, 8, 16, control);
- if (ret == 0) {
+ if (ret < 0) {
dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
return ret;
}
DAVINCI_MCBSP_WORD_32,
};
-static struct davinci_pcm_dma_params davinci_i2s_pcm_out = {
- .name = "I2S PCM Stereo out",
-};
-
-static struct davinci_pcm_dma_params davinci_i2s_pcm_in = {
- .name = "I2S PCM Stereo in",
-};
-
struct davinci_mcbsp_dev {
+ /*
+ * dma_params must be first because rtd->dai->cpu_dai->private_data
+ * is cast to a pointer of an array of struct davinci_pcm_dma_params in
+ * davinci_pcm_open.
+ */
+ struct davinci_pcm_dma_params dma_params[2];
void __iomem *base;
#define MOD_DSP_A 0
#define MOD_DSP_B 1
int mode;
u32 pcr;
struct clk *clk;
- struct davinci_pcm_dma_params *dma_params[2];
};
static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev,
toggle_clock(dev, playback);
}
-static int davinci_i2s_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *cpu_dai)
-{
- struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
- cpu_dai->dma_data = dev->dma_params[substream->stream];
- return 0;
-}
-
#define DEFAULT_BITPERSAMPLE 16
static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
- struct davinci_pcm_dma_params *dma_params = dai->dma_data;
struct davinci_mcbsp_dev *dev = dai->private_data;
+ struct davinci_pcm_dma_params *dma_params =
+ &dev->dma_params[substream->stream];
struct snd_interval *i = NULL;
int mcbsp_word_length;
unsigned int rcr, xcr, srgr;
#define DAVINCI_I2S_RATES SNDRV_PCM_RATE_8000_96000
static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
- .startup = davinci_i2s_startup,
.shutdown = davinci_i2s_shutdown,
.prepare = davinci_i2s_prepare,
.trigger = davinci_i2s_trigger,
dev->base = (void __iomem *)IO_ADDRESS(mem->start);
- dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &davinci_i2s_pcm_out;
- dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->dma_addr =
+ dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].dma_addr =
(dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DXR_REG);
- dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &davinci_i2s_pcm_in;
- dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->dma_addr =
+ dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].dma_addr =
(dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DRR_REG);
/* first TX, then RX */
ret = -ENXIO;
goto err_free_mem;
}
- dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = res->start;
+ dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].channel = res->start;
res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (!res) {
ret = -ENXIO;
goto err_free_mem;
}
- dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = res->start;
+ dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].channel = res->start;
davinci_i2s_dai.private_data = dev;
ret = snd_soc_register_dai(&davinci_i2s_dai);
printk(KERN_ERR "GBLCTL write error\n");
}
-static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *cpu_dai)
-{
- struct davinci_audio_dev *dev = cpu_dai->private_data;
- cpu_dai->dma_data = dev->dma_params[substream->stream];
- return 0;
-}
-
static void mcasp_start_rx(struct davinci_audio_dev *dev)
{
mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXHCLKRST);
static void davinci_mcasp_start(struct davinci_audio_dev *dev, int stream)
{
- if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (dev->txnumevt) /* enable FIFO */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
+ FIFO_ENABLE);
mcasp_start_tx(dev);
- else
+ } else {
+ if (dev->rxnumevt) /* enable FIFO */
+ mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
+ FIFO_ENABLE);
mcasp_start_rx(dev);
-
- /* enable FIFO */
- if (dev->txnumevt)
- mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
-
- if (dev->rxnumevt)
- mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+ }
}
static void mcasp_stop_rx(struct davinci_audio_dev *dev)
static void davinci_mcasp_stop(struct davinci_audio_dev *dev, int stream)
{
- if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+ if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ if (dev->txnumevt) /* disable FIFO */
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
+ FIFO_ENABLE);
mcasp_stop_tx(dev);
- else
+ } else {
+ if (dev->rxnumevt) /* disable FIFO */
+ mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
+ FIFO_ENABLE);
mcasp_stop_rx(dev);
-
- /* disable FIFO */
- if (dev->txnumevt)
- mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
-
- if (dev->rxnumevt)
- mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+ }
}
static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
{
struct davinci_audio_dev *dev = cpu_dai->private_data;
struct davinci_pcm_dma_params *dma_params =
- dev->dma_params[substream->stream];
+ &dev->dma_params[substream->stream];
int word_length;
u8 numevt;
}
static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
- .startup = davinci_mcasp_startup,
.trigger = davinci_mcasp_trigger,
.hw_params = davinci_mcasp_hw_params,
.set_fmt = davinci_mcasp_set_dai_fmt,
struct resource *mem, *ioarea, *res;
struct snd_platform_data *pdata;
struct davinci_audio_dev *dev;
- int count = 0;
int ret = 0;
dev = kzalloc(sizeof(struct davinci_audio_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
- dma_data = kzalloc(sizeof(struct davinci_pcm_dma_params) * 2,
- GFP_KERNEL);
- if (!dma_data) {
- ret = -ENOMEM;
- goto err_release_dev;
- }
-
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(&pdev->dev, "no mem resource?\n");
dev->txnumevt = pdata->txnumevt;
dev->rxnumevt = pdata->rxnumevt;
- dma_data[count].name = "I2S PCM Stereo out";
- dma_data[count].eventq_no = pdata->eventq_no;
- dma_data[count].dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
+ dma_data = &dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
+ dma_data->eventq_no = pdata->eventq_no;
+ dma_data->dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
io_v2p(dev->base));
- dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &dma_data[count];
/* first TX, then RX */
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
goto err_release_region;
}
- dma_data[count].channel = res->start;
- count++;
- dma_data[count].name = "I2S PCM Stereo in";
- dma_data[count].eventq_no = pdata->eventq_no;
- dma_data[count].dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
+ dma_data->channel = res->start;
+
+ dma_data = &dev->dma_params[SNDRV_PCM_STREAM_CAPTURE];
+ dma_data->eventq_no = pdata->eventq_no;
+ dma_data->dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
io_v2p(dev->base));
- dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &dma_data[count];
res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (!res) {
goto err_release_region;
}
- dma_data[count].channel = res->start;
+ dma_data->channel = res->start;
davinci_mcasp_dai[pdata->op_mode].private_data = dev;
davinci_mcasp_dai[pdata->op_mode].dev = &pdev->dev;
ret = snd_soc_register_dai(&davinci_mcasp_dai[pdata->op_mode]);
err_release_region:
release_mem_region(mem->start, (mem->end - mem->start) + 1);
err_release_data:
- kfree(dma_data);
-err_release_dev:
kfree(dev);
return ret;
static int davinci_mcasp_remove(struct platform_device *pdev)
{
struct snd_platform_data *pdata = pdev->dev.platform_data;
- struct davinci_pcm_dma_params *dma_data;
struct davinci_audio_dev *dev;
struct resource *mem;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(mem->start, (mem->end - mem->start) + 1);
- dma_data = dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
- kfree(dma_data);
kfree(dev);
return 0;
};
struct davinci_audio_dev {
+ /*
+ * dma_params must be first because rtd->dai->cpu_dai->private_data
+ * is cast to a pointer of an array of struct davinci_pcm_dma_params in
+ * davinci_pcm_open.
+ */
+ struct davinci_pcm_dma_params dma_params[2];
void __iomem *base;
int sample_rate;
struct clk *clk;
- struct davinci_pcm_dma_params *dma_params[2];
unsigned int codec_fmt;
/* McASP specific data */
static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
{
struct davinci_runtime_data *prtd = substream->runtime->private_data;
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
struct edmacc_param p_ram;
int ret;
- if (!dma_data)
- return -ENODEV;
-
- prtd->params = dma_data;
-
/* Request master DMA channel */
ret = edma_alloc_channel(prtd->params->channel,
davinci_pcm_dma_irq, substream,
struct snd_pcm_runtime *runtime = substream->runtime;
struct davinci_runtime_data *prtd;
int ret = 0;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct davinci_pcm_dma_params *pa = rtd->dai->cpu_dai->private_data;
+ struct davinci_pcm_dma_params *params = &pa[substream->stream];
+ if (!params)
+ return -ENODEV;
snd_soc_set_runtime_hwparams(substream, &davinci_pcm_hardware);
/* ensure that buffer size is a multiple of period size */
return -ENOMEM;
spin_lock_init(&prtd->lock);
+ prtd->params = params;
runtime->private_data = prtd;
struct davinci_pcm_dma_params {
- char *name; /* stream identifier */
int channel; /* sync dma channel ID */
unsigned short acnt;
dma_addr_t dma_addr; /* device physical address for DMA */
break;
}
- /* sync */
- if (!(fmt & SND_SOC_DAIFMT_ASYNC))
- scr |= SSI_SCR_SYN;
-
- /* tdm - only for stereo atm */
- if (fmt & SND_SOC_DAIFMT_TDM)
- scr |= SSI_SCR_NET;
-
if (cpu_dai->id == IMX_DAI_SSI0 || cpu_dai->id == IMX_DAI_SSI2) {
SSI1_STCR = stcr;
SSI1_SRCR = srcr;
select SND_OMAP_SOC_MCBSP
select SND_SOC_CX20442
help
- Say Y if you want to add support for SoC audio on Amstrad Delta.
+ Say Y if you want to add support for SoC audio device connected to
+ a handset and a speakerphone found on Amstrad E3 (Delta) videophone.
+
+ Note that in order to get those devices fully supported, you have to
+ build the kernel with standard serial port driver included and
+ configured for at least 4 ports. Then, from userspace, you must load
+ a line discipline #19 on the modem (ttyS3) serial line. The simplest
+ way to achieve this is to install util-linux-ng and use the included
+ ldattach utility. This can be started automatically from udev,
+ a simple rule like this one should do the trick (it does for me):
+ ACTION=="add", KERNEL=="controlC0", \
+ RUN+="/usr/sbin/ldattach 19 /dev/ttyS3"
config SND_OMAP_SOC_OSK5912
tristate "SoC Audio support for omap osk5912"
config SND_PXA2XX_SOC_IMOTE2
tristate "SoC Audio support for IMote 2"
- depends on SND_PXA2XX_SOC && MACH_INTELMOTE2
+ depends on SND_PXA2XX_SOC && MACH_INTELMOTE2 && I2C
select SND_PXA2XX_SOC_I2S
select SND_SOC_WM8940
help
{
struct s3c24xx_runtime_data *prtd = substream->runtime->private_data;
dma_addr_t pos = prtd->dma_pos;
+ unsigned int limit;
int ret;
pr_debug("Entered %s\n", __func__);
- while (prtd->dma_loaded < prtd->dma_limit) {
+ if (s3c_dma_has_circular()) {
+ limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period;
+ } else
+ limit = prtd->dma_limit;
+
+ pr_debug("%s: loaded %d, limit %d\n", __func__, prtd->dma_loaded, limit);
+
+ while (prtd->dma_loaded < limit) {
unsigned long len = prtd->dma_period;
pr_debug("dma_loaded: %d\n", prtd->dma_loaded);
snd_pcm_period_elapsed(substream);
spin_lock(&prtd->lock);
- if (prtd->state & ST_RUNNING) {
+ if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) {
prtd->dma_loaded--;
s3c24xx_pcm_enqueue(substream);
}
printk(KERN_ERR "failed to get dma channel\n");
return ret;
}
+
+ /* use the circular buffering if we have it available. */
+ if (s3c_dma_has_circular())
+ s3c2410_dma_setflags(prtd->params->channel,
+ S3C2410_DMAF_CIRCULAR);
}
s3c2410_dma_set_buffdone_fn(prtd->params->channel,
#define soc_resume NULL
#endif
+static struct snd_soc_dai_ops null_dai_ops = {
+};
+
static void snd_soc_instantiate_card(struct snd_soc_card *card)
{
struct platform_device *pdev = container_of(card->dev,
ac97 = 1;
}
+ for (i = 0; i < card->num_links; i++) {
+ if (!card->dai_link[i].codec_dai->ops)
+ card->dai_link[i].codec_dai->ops = &null_dai_ops;
+ }
+
/* If we have AC97 in the system then don't wait for the
* codec. This will need revisiting if we have to handle
* systems with mixed AC97 and non-AC97 parts. Only check for
return 0;
}
-static struct snd_soc_dai_ops null_dai_ops = {
-};
-
/**
* snd_soc_register_dai - Register a DAI with the ASoC core
*
/* connected jack or spk ? */
if (widget->id == snd_soc_dapm_hp || widget->id == snd_soc_dapm_spk ||
- widget->id == snd_soc_dapm_line)
+ (widget->id == snd_soc_dapm_line && !list_empty(&widget->sources)))
return 1;
}
return 1;
/* connected jack ? */
- if (widget->id == snd_soc_dapm_mic || widget->id == snd_soc_dapm_line)
+ if (widget->id == snd_soc_dapm_mic ||
+ (widget->id == snd_soc_dapm_line && !list_empty(&widget->sinks)))
return 1;
}
}
}
}
- mutex_unlock(&codec->mutex);
dapm_power_widgets(codec, event);
+ mutex_unlock(&codec->mutex);
dump_dapm(codec, __func__);
return 0;
}
activate_substream(struct snd_usb_caiaqdev *dev,
struct snd_pcm_substream *sub)
{
+ spin_lock(&dev->spinlock);
+
if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
dev->sub_playback[sub->number] = sub;
else
dev->sub_capture[sub->number] = sub;
+
+ spin_unlock(&dev->spinlock);
}
static void
{
int index = sub->number;
struct snd_usb_caiaqdev *dev = snd_pcm_substream_chip(sub);
+ snd_pcm_uframes_t ptr;
+
+ spin_lock(&dev->spinlock);
if (dev->input_panic || dev->output_panic)
- return SNDRV_PCM_POS_XRUN;
+ ptr = SNDRV_PCM_POS_XRUN;
if (sub->stream == SNDRV_PCM_STREAM_PLAYBACK)
- return bytes_to_frames(sub->runtime,
+ ptr = bytes_to_frames(sub->runtime,
dev->audio_out_buf_pos[index]);
else
- return bytes_to_frames(sub->runtime,
+ ptr = bytes_to_frames(sub->runtime,
dev->audio_in_buf_pos[index]);
+
+ spin_unlock(&dev->spinlock);
+ return ptr;
}
/* operators for both playback and capture */
#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.20");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
* build a feature control
*/
+static size_t append_ctl_name(struct snd_kcontrol *kctl, const char *str)
+{
+ return strlcat(kctl->id.name, str, sizeof(kctl->id.name));
+}
+
static void build_feature_ctl(struct mixer_build *state, unsigned char *desc,
unsigned int ctl_mask, int control,
struct usb_audio_term *iterm, int unitid)
*/
if (! mapped_name && ! (state->oterm.type >> 16)) {
if ((state->oterm.type & 0xff00) == 0x0100) {
- len = strlcat(kctl->id.name, " Capture", sizeof(kctl->id.name));
+ len = append_ctl_name(kctl, " Capture");
} else {
- len = strlcat(kctl->id.name + len, " Playback", sizeof(kctl->id.name));
+ len = append_ctl_name(kctl, " Playback");
}
}
- strlcat(kctl->id.name + len, control == USB_FEATURE_MUTE ? " Switch" : " Volume",
- sizeof(kctl->id.name));
+ append_ctl_name(kctl, control == USB_FEATURE_MUTE ?
+ " Switch" : " Volume");
if (control == USB_FEATURE_VOLUME) {
kctl->tlv.c = mixer_vol_tlv;
kctl->vd[0].access |=
len = get_term_name(state, iterm, kctl->id.name, sizeof(kctl->id.name), 0);
if (! len)
len = sprintf(kctl->id.name, "Mixer Source %d", in_ch + 1);
- strlcat(kctl->id.name + len, " Volume", sizeof(kctl->id.name));
+ append_ctl_name(kctl, " Volume");
snd_printdd(KERN_INFO "[%d] MU [%s] ch = %d, val = %d/%d\n",
cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
if (! len)
strlcpy(kctl->id.name, name, sizeof(kctl->id.name));
}
- strlcat(kctl->id.name, " ", sizeof(kctl->id.name));
- strlcat(kctl->id.name, valinfo->suffix, sizeof(kctl->id.name));
+ append_ctl_name(kctl, " ");
+ append_ctl_name(kctl, valinfo->suffix);
snd_printdd(KERN_INFO "[%d] PU [%s] ch = %d, val = %d/%d\n",
cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
if ((state->oterm.type & 0xff00) == 0x0100)
- strlcat(kctl->id.name, " Capture Source", sizeof(kctl->id.name));
+ append_ctl_name(kctl, " Capture Source");
else
- strlcat(kctl->id.name, " Playback Source", sizeof(kctl->id.name));
+ append_ctl_name(kctl, " Playback Source");
}
snd_printdd(KERN_INFO "[%d] SU [%s] items = %d\n",
snd_printdd(KERN_DEBUG "%i\n", atomic_read(&us122l->mmap_count));
}
-static struct vm_operations_struct usb_stream_hwdep_vm_ops = {
+static const struct vm_operations_struct usb_stream_hwdep_vm_ops = {
.open = usb_stream_hwdep_vm_open,
.fault = usb_stream_hwdep_vm_fault,
.close = usb_stream_hwdep_vm_close,
return 0;
}
-static struct vm_operations_struct us428ctls_vm_ops = {
+static const struct vm_operations_struct us428ctls_vm_ops = {
.fault = snd_us428ctls_vm_fault,
};
}
-static struct vm_operations_struct snd_usX2Y_hwdep_pcm_vm_ops = {
+static const struct vm_operations_struct snd_usX2Y_hwdep_pcm_vm_ops = {
.open = snd_usX2Y_hwdep_pcm_vm_open,
.close = snd_usX2Y_hwdep_pcm_vm_close,
.fault = snd_usX2Y_hwdep_pcm_vm_fault,
perf-top
perf*.1
perf*.xml
+perf*.html
common-cmds.h
tags
TAGS
-w::
--width=::
Select the width of the SVG file (default: 1000)
+-p::
+--power-only::
+ Only output the CPU power section of the diagram
SEE ALSO
uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
-# If we're on a 64-bit kernel, use -m64
-ifndef NO_64BIT
- ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
- M64 := -m64
- endif
+#
+# Add -m32 for cross-builds:
+#
+ifdef NO_64BIT
+ MBITS := -m32
+else
+ #
+ # If we're on a 64-bit kernel, use -m64:
+ #
+ ifneq ($(patsubst %64,%,$(uname_M)),$(uname_M))
+ MBITS := -m64
+ endif
endif
# CFLAGS and LDFLAGS are for the users to override from the command line.
# Include saner warnings here, which can catch bugs:
#
-EXTRA_WARNINGS := -Wcast-align
-EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat
+EXTRA_WARNINGS := -Wformat
EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-security
EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wformat-y2k
EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wshadow
EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wstrict-prototypes
EXTRA_WARNINGS := $(EXTRA_WARNINGS) -Wdeclaration-after-statement
-CFLAGS = $(M64) -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -fstack-protector-all -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS)
+CFLAGS = $(MBITS) -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -fstack-protector-all -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS)
LDFLAGS = -lpthread -lrt -lelf -lm
ALL_CFLAGS = $(CFLAGS)
ALL_LDFLAGS = $(LDFLAGS)
PTHREAD_LIBS =
endif
-ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
- msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel);
+ifeq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
+ ifneq ($(shell sh -c "(echo '\#include <libelf.h>'; echo 'int main(void) { Elf * elf = elf_begin(0, ELF_C_READ_MMAP, 0); return (long)elf; }') | $(CC) -x c - $(ALL_CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -o /dev/null $(ALL_LDFLAGS) > /dev/null 2>&1 && echo y"), y)
+ BASIC_CFLAGS += -DLIBELF_NO_MMAP
+ endif
+else
+ msg := $(error No libelf.h/libelf found, please install libelf-dev/elfutils-libelf-devel and glibc-dev[el]);
endif
ifdef NO_DEMANGLE
common-cmds.h: util/generate-cmdlist.sh command-list.txt
common-cmds.h: $(wildcard Documentation/perf-*.txt)
- $(QUIET_GEN)util/generate-cmdlist.sh > $@+ && mv $@+ $@
+ $(QUIET_GEN). util/generate-cmdlist.sh > $@+ && mv $@+ $@
$(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
$(QUIET_GEN)$(RM) $@ $@+ && \
static int system_wide = 0;
static int profile_cpu = -1;
static pid_t target_pid = -1;
+static pid_t child_pid = -1;
static int inherit = 1;
static int force = 0;
static int append_file = 0;
static void sig_atexit(void)
{
+ if (child_pid != -1)
+ kill(child_pid, SIGTERM);
+
if (signr == -1)
return;
exit(-1);
}
}
+
+ child_pid = pid;
}
if (realtime_prio) {
static LIST_HEAD(sort_list);
-static int sort_dimension__add(char *tok, struct list_head *list)
+static int sort_dimension__add(const char *tok, struct list_head *list)
{
int i;
free(str);
- sort_dimension__add((char *)"pid", &cmp_pid);
+ sort_dimension__add("pid", &cmp_pid);
}
static const char *record_args[] = {
static int run_count = 1;
static int inherit = 1;
static int scale = 1;
-static int target_pid = -1;
+static pid_t target_pid = -1;
+static pid_t child_pid = -1;
static int null_run = 0;
static int fd[MAX_NR_CPUS][MAX_COUNTERS];
exit(-1);
}
+ child_pid = pid;
+
/*
* Wait for the child to be ready to exec.
*/
static void abs_printout(int counter, double avg)
{
+ double total, ratio = 0.0;
+
fprintf(stderr, " %14.0f %-24s", avg, event_name(counter));
if (MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
- fprintf(stderr, " # %10.3f IPC ",
- avg / avg_stats(&runtime_cycles_stats));
+ total = avg_stats(&runtime_cycles_stats);
+
+ if (total)
+ ratio = avg / total;
+
+ fprintf(stderr, " # %10.3f IPC ", ratio);
} else {
- fprintf(stderr, " # %10.3f M/sec",
- 1000.0 * avg / avg_stats(&runtime_nsecs_stats));
+ total = avg_stats(&runtime_nsecs_stats);
+
+ if (total)
+ ratio = 1000.0 * avg / total;
+
+ fprintf(stderr, " # %10.3f M/sec", ratio);
}
}
static void sig_atexit(void)
{
+ if (child_pid != -1)
+ kill(child_pid, SIGTERM);
+
if (signr == -1)
return;
static u64 first_time, last_time;
+static int power_only;
+
static struct perf_header *header;
u64 cpu;
struct power_event *pwr;
- for (cpu = 0; cpu < numcpus; cpu++) {
+ for (cpu = 0; cpu <= numcpus; cpu++) {
pwr = malloc(sizeof(struct power_event));
if (!pwr)
return;
if (c->Y && c->start_time <= we->time && c->end_time >= we->time) {
if (p->pid == we->waker) {
from = c->Y;
- task_from = c->comm;
+ task_from = strdup(c->comm);
}
if (p->pid == we->wakee) {
to = c->Y;
- task_to = c->comm;
+ task_to = strdup(c->comm);
}
}
c = c->next;
}
+ c = p->all;
+ while (c) {
+ if (p->pid == we->waker && !from) {
+ from = c->Y;
+ task_from = strdup(c->comm);
+ }
+ if (p->pid == we->wakee && !to) {
+ to = c->Y;
+ task_to = strdup(c->comm);
+ }
+ c = c->next;
+ }
}
p = p->next;
}
+ if (!task_from) {
+ task_from = malloc(40);
+ sprintf(task_from, "[%i]", we->waker);
+ }
+ if (!task_to) {
+ task_to = malloc(40);
+ sprintf(task_to, "[%i]", we->wakee);
+ }
+
if (we->waker == -1)
svg_interrupt(we->time, to);
else if (from && to && abs(from - to) == 1)
else
svg_partial_wakeline(we->time, from, task_from, to, task_to);
we = we->next;
+
+ free(task_from);
+ free(task_to);
}
}
/* no exit marker, task kept running to the end */
if (p->end_time == 0)
p->end_time = last_time;
- if (p->total_time >= threshold)
+ if (p->total_time >= threshold && !power_only)
p->display = 1;
c = p->all;
if (c->start_time == 1)
c->start_time = first_time;
- if (c->total_time >= threshold) {
+ if (c->total_time >= threshold && !power_only) {
c->display = 1;
count++;
}
"output file name"),
OPT_INTEGER('w', "width", &svg_page_width,
"page width"),
+ OPT_BOOLEAN('p', "power-only", &power_only,
+ "output power data only"),
OPT_END()
};
switch (c) {
case 'd':
prompt_integer(&delay_secs, "Enter display delay");
+ if (delay_secs < 1)
+ delay_secs = 1;
break;
case 'e':
prompt_integer(&print_entries, "Enter display entries (lines)");
"exit_idle",
"mwait_idle",
"mwait_idle_with_hints",
+ "poll_idle",
"ppc64_runlatch_off",
"pseries_dedicated_idle_sleep",
NULL
more:
event = (event_t *)(buf + head);
- size = event->header.size;
- if (!size)
- size = 8;
-
if (head + event->header.size >= page_size * mmap_window) {
unsigned long shift = page_size * (head / page_size);
int res;
size = event->header.size;
-
if (!size || process_event(event, offset, head) < 0) {
/*
usage_with_options(annotate_usage, options);
}
-
setup_pager();
return __cmd_trace();
If your architecture does have hardware capabilities, you can override the
weak stub hw_perf_event_init() to register hardware counters.
+
+Architectures that have d-cache aliassing issues, such as Sparc and ARM,
+should select PERF_USE_VMALLOC in order to avoid these for perf mmap().
#!/bin/sh
GVF=PERF-VERSION-FILE
-DEF_VER=v0.0.1.PERF
+DEF_VER=v0.0.2.PERF
LF='
'
#include "module.h"
#include <libelf.h>
+#include <libgen.h>
#include <gelf.h>
#include <elf.h>
#include <dirent.h>
static int mod_dso__load_module_paths(struct mod_dso *self)
{
struct utsname uts;
- int count = 0, len;
+ int count = 0, len, err = -1;
char *line = NULL;
FILE *file;
- char *path;
+ char *dpath, *dir;
size_t n;
if (uname(&uts) < 0)
- goto out_failure;
+ return err;
len = strlen("/lib/modules/");
len += strlen(uts.release);
len += strlen("/modules.dep");
- path = calloc(1, len);
- if (path == NULL)
- goto out_failure;
+ dpath = calloc(1, len + 1);
+ if (dpath == NULL)
+ return err;
- strcat(path, "/lib/modules/");
- strcat(path, uts.release);
- strcat(path, "/modules.dep");
+ strcat(dpath, "/lib/modules/");
+ strcat(dpath, uts.release);
+ strcat(dpath, "/modules.dep");
- file = fopen(path, "r");
- free(path);
+ file = fopen(dpath, "r");
if (file == NULL)
goto out_failure;
+ dir = dirname(dpath);
+ if (!dir)
+ goto out_failure;
+ strcat(dir, "/");
+
while (!feof(file)) {
- char *name, *tmp;
struct module *module;
+ char *name, *path, *tmp;
+ FILE *modfile;
int line_len;
line_len = getline(&line, &n, file);
break;
if (!line)
- goto out_failure;
+ break;
line[--line_len] = '\0'; /* \n */
- path = strtok(line, ":");
+ path = strchr(line, ':');
+ if (!path)
+ break;
+ *path = '\0';
+
+ path = strdup(line);
if (!path)
- goto out_failure;
+ break;
+
+ if (!strstr(path, dir)) {
+ if (strncmp(path, "kernel/", 7))
+ break;
+
+ free(path);
+ path = calloc(1, strlen(dir) + strlen(line) + 1);
+ if (!path)
+ break;
+ strcat(path, dir);
+ strcat(path, line);
+ }
+
+ modfile = fopen(path, "r");
+ if (modfile == NULL)
+ break;
+ fclose(modfile);
name = strdup(path);
- name = strtok(name, "/");
+ if (!name)
+ break;
+ name = strtok(name, "/");
tmp = name;
while (tmp) {
if (tmp)
name = tmp;
}
+
name = strsep(&name, ".");
+ if (!name)
+ break;
- /* Quirk: replace '-' with '_' in sound modules */
+ /* Quirk: replace '-' with '_' in all modules */
for (len = strlen(name); len; len--) {
if (*(name+len) == '-')
*(name+len) = '_';
}
module = module__new(name, path);
- if (!module) {
- fprintf(stderr, "load_module_paths: allocation error\n");
- goto out_failure;
- }
+ if (!module)
+ break;
mod_dso__insert_module(self, module);
module->sections = sec_dso__new_dso("sections");
- if (!module->sections) {
- fprintf(stderr, "load_module_paths: allocation error\n");
- goto out_failure;
- }
+ if (!module->sections)
+ break;
module->active = mod_dso__load_sections(module);
count++;
}
- free(line);
- fclose(file);
-
- return count;
+ if (feof(file))
+ err = count;
+ else
+ fprintf(stderr, "load_module_paths: modules.dep parsing failure!\n");
out_failure:
- return -1;
+ if (dpath)
+ free(dpath);
+ if (file)
+ fclose(file);
+ if (line)
+ free(line);
+
+ return err;
}
int mod_dso__load_modules(struct mod_dso *dso)
DIR *sys_dir, *evt_dir;
struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
char id_buf[4];
- int sys_dir_fd, fd;
+ int fd;
u64 id;
char evt_path[MAXPATHLEN];
+ char dir_path[MAXPATHLEN];
if (valid_debugfs_mount(debugfs_path))
return NULL;
sys_dir = opendir(debugfs_path);
if (!sys_dir)
- goto cleanup;
- sys_dir_fd = dirfd(sys_dir);
+ return NULL;
for_each_subsystem(sys_dir, sys_dirent, sys_next) {
- int dfd = openat(sys_dir_fd, sys_dirent.d_name,
- O_RDONLY|O_DIRECTORY), evt_dir_fd;
- if (dfd == -1)
- continue;
- evt_dir = fdopendir(dfd);
- if (!evt_dir) {
- close(dfd);
+
+ snprintf(dir_path, MAXPATHLEN, "%s/%s", debugfs_path,
+ sys_dirent.d_name);
+ evt_dir = opendir(dir_path);
+ if (!evt_dir)
continue;
- }
- evt_dir_fd = dirfd(evt_dir);
+
for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
- snprintf(evt_path, MAXPATHLEN, "%s/id",
+
+ snprintf(evt_path, MAXPATHLEN, "%s/%s/id", dir_path,
evt_dirent.d_name);
- fd = openat(evt_dir_fd, evt_path, O_RDONLY);
+ fd = open(evt_path, O_RDONLY);
if (fd < 0)
continue;
if (read(fd, id_buf, sizeof(id_buf)) < 0) {
closedir(evt_dir);
}
-cleanup:
closedir(sys_dir);
return NULL;
}
FILE *file;
int id;
- sprintf(filename, "/sys/kernel/debug/tracing/events/%s/id", orgname);
+ sprintf(filename, "%s/", debugfs_path);
+ strncat(filename, orgname, strlen(orgname));
+ strcat(filename, "/id");
+
c = strchr(filename, ':');
if (c)
*c = '/';
{
DIR *sys_dir, *evt_dir;
struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
- int sys_dir_fd;
char evt_path[MAXPATHLEN];
+ char dir_path[MAXPATHLEN];
if (valid_debugfs_mount(debugfs_path))
return;
sys_dir = opendir(debugfs_path);
if (!sys_dir)
- goto cleanup;
- sys_dir_fd = dirfd(sys_dir);
+ return;
for_each_subsystem(sys_dir, sys_dirent, sys_next) {
- int dfd = openat(sys_dir_fd, sys_dirent.d_name,
- O_RDONLY|O_DIRECTORY), evt_dir_fd;
- if (dfd == -1)
- continue;
- evt_dir = fdopendir(dfd);
- if (!evt_dir) {
- close(dfd);
+
+ snprintf(dir_path, MAXPATHLEN, "%s/%s", debugfs_path,
+ sys_dirent.d_name);
+ evt_dir = opendir(dir_path);
+ if (!evt_dir)
continue;
- }
- evt_dir_fd = dirfd(evt_dir);
+
for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
snprintf(evt_path, MAXPATHLEN, "%s:%s",
sys_dirent.d_name, evt_dirent.d_name);
}
closedir(evt_dir);
}
-
-cleanup:
closedir(sys_dir);
}
int svg_page_width = 1000;
-#define MIN_TEXT_SIZE 0.001
+#define MIN_TEXT_SIZE 0.01
static u64 total_height;
static FILE *svgfile;
fprintf(svgfile, " rect.process2 { fill:rgb(180,180,180); fill-opacity:0.9; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.sample { fill:rgb( 0, 0,255); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.blocked { fill:rgb(255, 0, 0); fill-opacity:0.5; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
- fprintf(svgfile, " rect.waiting { fill:rgb(214,214, 0); fill-opacity:0.3; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
+ fprintf(svgfile, " rect.waiting { fill:rgb(224,214, 0); fill-opacity:0.8; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.WAITING { fill:rgb(255,214, 48); fill-opacity:0.6; stroke-width:0; stroke:rgb( 0, 0, 0); } \n");
fprintf(svgfile, " rect.cpu { fill:rgb(192,192,192); fill-opacity:0.2; stroke-width:0.5; stroke:rgb(128,128,128); } \n");
fprintf(svgfile, " rect.pstate { fill:rgb(128,128,128); fill-opacity:0.8; stroke-width:0; } \n");
}
fclose(file);
}
+
+ /* CPU type */
+ file = fopen("/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies", "r");
+ if (file) {
+ while (fgets(buf, 255, file)) {
+ unsigned int freq;
+ freq = strtoull(buf, NULL, 10);
+ if (freq > max_freq)
+ max_freq = freq;
+ }
+ fclose(file);
+ }
return cpu_m;
}
{
return elf_sym__type(sym) == STT_FUNC &&
sym->st_name != 0 &&
- sym->st_shndx != SHN_UNDEF &&
- sym->st_size != 0;
+ sym->st_shndx != SHN_UNDEF;
}
static inline int elf_sym__is_label(const GElf_Sym *sym)
if (fd < 0)
goto out;
- elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+ elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
if (elf == NULL)
goto out_close;
Elf *elf;
int nr = 0, kernel = !strcmp("[kernel]", self->name);
- elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+ elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
if (elf == NULL) {
if (v)
fprintf(stderr, "%s: cannot read %s ELF file.\n",
if (fd < 0)
goto out;
- elf = elf_begin(fd, ELF_C_READ_MMAP, NULL);
+ elf = elf_begin(fd, PERF_ELF_C_READ_MMAP, NULL);
if (elf == NULL) {
if (v)
fprintf(stderr, "%s: cannot read %s ELF file.\n",
struct mod_dso *mods = mod_dso__new_dso("modules");
struct module *pos;
struct rb_node *next;
- int err;
+ int err, count = 0;
err = mod_dso__load_modules(mods);
break;
next = rb_next(&pos->rb_node);
+ count += err;
}
if (err < 0) {
mod_dso__delete_modules(mods);
mod_dso__delete_self(mods);
+ return err;
}
- return err;
+ return count;
}
static inline void dso__fill_symbol_holes(struct dso *self)
if (vmlinux) {
err = dso__load_vmlinux(self, vmlinux, filter, v);
- if (err > 0 && use_modules)
- err = dso__load_modules(self, filter, v);
+ if (err > 0 && use_modules) {
+ int syms = dso__load_modules(self, filter, v);
+
+ if (syms < 0) {
+ fprintf(stderr, "dso__load_modules failed!\n");
+ return syms;
+ }
+ err += syms;
+ }
}
if (err <= 0)
#endif
#endif
+/*
+ * libelf 0.8.x and earlier do not support ELF_C_READ_MMAP;
+ * for newer versions we can use mmap to reduce memory usage:
+ */
+#ifdef LIBELF_NO_MMAP
+# define PERF_ELF_C_READ_MMAP ELF_C_READ
+#else
+# define PERF_ELF_C_READ_MMAP ELF_C_READ_MMAP
+#endif
+
#ifndef DMGL_PARAMS
#define DMGL_PARAMS (1 << 0) /* Include function args */
#define DMGL_ANSI (1 << 1) /* Include const, volatile, etc */
}
static int test_type_token(enum event_type type, char *token,
- enum event_type expect, char *expect_tok)
+ enum event_type expect, const char *expect_tok)
{
if (type != expect) {
die("Error: expected type %d but read %d",
return __read_expect_type(expect, tok, 1);
}
-static int __read_expected(enum event_type expect, char *str, int newline_ok)
+static int __read_expected(enum event_type expect, const char *str, int newline_ok)
{
enum event_type type;
char *token;
return 0;
}
-static int read_expected(enum event_type expect, char *str)
+static int read_expected(enum event_type expect, const char *str)
{
return __read_expected(expect, str, 1);
}
-static int read_expected_item(enum event_type expect, char *str)
+static int read_expected_item(enum event_type expect, const char *str)
{
return __read_expected(expect, str, 0);
}
{ "NET_TX_SOFTIRQ", 2 },
{ "NET_RX_SOFTIRQ", 3 },
{ "BLOCK_SOFTIRQ", 4 },
- { "TASKLET_SOFTIRQ", 5 },
- { "SCHED_SOFTIRQ", 6 },
- { "HRTIMER_SOFTIRQ", 7 },
- { "RCU_SOFTIRQ", 8 },
+ { "BLOCK_IOPOLL_SOFTIRQ", 5 },
+ { "TASKLET_SOFTIRQ", 6 },
+ { "SCHED_SOFTIRQ", 7 },
+ { "HRTIMER_SOFTIRQ", 8 },
+ { "RCU_SOFTIRQ", 9 },
{ "HRTIMER_NORESTART", 0 },
{ "HRTIMER_RESTART", 1 },
gen_init_cpio
initramfs_data.cpio
initramfs_data.cpio.gz
+initramfs_data.cpio.bz2
+initramfs_data.cpio.lzma
initramfs_list
include
PHONY += klibcdirs
-# Gzip, but no bzip2
+# Gzip
suffix_$(CONFIG_INITRAMFS_COMPRESSION_GZIP) = .gz
# Bzip2
bool called = true;
struct kvm_vcpu *vcpu;
- if (alloc_cpumask_var(&cpus, GFP_ATOMIC))
- cpumask_clear(cpus);
+ zalloc_cpumask_var(&cpus, GFP_ATOMIC);
spin_lock(&kvm->requests_lock);
me = smp_processor_id();
}
+static void kvm_mmu_notifier_change_pte(struct mmu_notifier *mn,
+ struct mm_struct *mm,
+ unsigned long address,
+ pte_t pte)
+{
+ struct kvm *kvm = mmu_notifier_to_kvm(mn);
+
+ spin_lock(&kvm->mmu_lock);
+ kvm->mmu_notifier_seq++;
+ kvm_set_spte_hva(kvm, address, pte);
+ spin_unlock(&kvm->mmu_lock);
+}
+
static void kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn,
struct mm_struct *mm,
unsigned long start,
.invalidate_range_start = kvm_mmu_notifier_invalidate_range_start,
.invalidate_range_end = kvm_mmu_notifier_invalidate_range_end,
.clear_flush_young = kvm_mmu_notifier_clear_flush_young,
+ .change_pte = kvm_mmu_notifier_change_pte,
.release = kvm_mmu_notifier_release,
};
#endif /* CONFIG_MMU_NOTIFIER && KVM_ARCH_WANT_MMU_NOTIFIER */
return 0;
}
-static struct vm_operations_struct kvm_vcpu_vm_ops = {
+static const struct vm_operations_struct kvm_vcpu_vm_ops = {
.fault = kvm_vcpu_fault,
};
return 0;
}
-static struct vm_operations_struct kvm_vm_vm_ops = {
+static const struct vm_operations_struct kvm_vm_vm_ops = {
.fault = kvm_vm_fault,
};
DEFINE_SIMPLE_ATTRIBUTE(vcpu_stat_fops, vcpu_stat_get, NULL, "%llu\n");
-static struct file_operations *stat_fops[] = {
+static const struct file_operations *stat_fops[] = {
[KVM_STAT_VCPU] = &vcpu_stat_fops,
[KVM_STAT_VM] = &vm_stat_fops,
};
int r;
int cpu;
- kvm_init_debug();
-
r = kvm_arch_init(opaque);
if (r)
goto out_fail;
kvm_preempt_ops.sched_in = kvm_sched_in;
kvm_preempt_ops.sched_out = kvm_sched_out;
+ kvm_init_debug();
+
return 0;
out_free:
out:
kvm_arch_exit();
out_fail:
- kvm_exit_debug();
return r;
}
EXPORT_SYMBOL_GPL(kvm_init);
void kvm_exit(void)
{
tracepoint_synchronize_unregister();
+ kvm_exit_debug();
misc_deregister(&kvm_dev);
kmem_cache_destroy(kvm_vcpu_cache);
sysdev_unregister(&kvm_sysdev);
on_each_cpu(hardware_disable, NULL, 1);
kvm_arch_hardware_unsetup();
kvm_arch_exit();
- kvm_exit_debug();
free_cpumask_var(cpus_hardware_enabled);
__free_page(bad_page);
}
projects / firefly-linux-kernel-4.4.55.git / commitdiff