ASoC: Initial WM8962 IRQ support
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Tue, 28 Sep 2010 23:01:20 +0000 (16:01 -0700)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Wed, 29 Sep 2010 07:32:36 +0000 (00:32 -0700)
Provide an initial hookup for interrupts on the WM8962. Currently we simply
report error status via log messages if an IRQ is provided for the device.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
include/sound/wm8962.h
sound/soc/codecs/wm8962.c

index f70258e3471cffa26206f478ebe1c2bd1a7eae78..cc32aff53222c6924417a5fcc2df3ec662229088 100644 (file)
@@ -17,6 +17,8 @@
 struct wm8962_pdata {
        u32 gpio_init[WM8962_MAX_GPIO];
 
+       bool irq_active_low;
+
        bool spk_mono;   /* Speaker outputs tied together as mono */
 };
 
index 8e5f4669137940e042517a18e36c1ef26ec2fbdf..4fa5de873c8b2b8792e119d219a8da60fa958106 100644 (file)
@@ -1461,6 +1461,29 @@ static struct snd_soc_dai_driver wm8962_dai = {
        .symmetric_rates = 1,
 };
 
+static irqreturn_t wm8962_irq(int irq, void *data)
+{
+       struct snd_soc_codec *codec = data;
+       int mask;
+       int active;
+
+       mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
+
+       active = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
+       active &= ~mask;
+
+       if (active & WM8962_FIFOS_ERR_EINT)
+               dev_err(codec->dev, "FIFO error\n");
+
+       if (active & WM8962_TEMP_SHUT_EINT)
+               dev_crit(codec->dev, "Thermal shutdown\n");
+
+       /* Acknowledge the interrupts */
+       snd_soc_write(codec, WM8962_INTERRUPT_STATUS_2, active);
+
+       return IRQ_HANDLED;
+}
+
 #ifdef CONFIG_PM
 static int wm8962_resume(struct snd_soc_codec *codec)
 {
@@ -1632,7 +1655,9 @@ static int wm8962_probe(struct snd_soc_codec *codec)
        int ret;
        struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
        struct wm8962_pdata *pdata = dev_get_platdata(codec->dev);
-       int i;
+       struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
+                                             dev);
+       int i, trigger, irq_pol;
 
        wm8962->codec = codec;
 
@@ -1748,6 +1773,34 @@ static int wm8962_probe(struct snd_soc_codec *codec)
 
        wm8962_init_beep(codec);
 
+       if (i2c->irq) {
+               if (pdata && pdata->irq_active_low) {
+                       trigger = IRQF_TRIGGER_LOW;
+                       irq_pol = WM8962_IRQ_POL;
+               } else {
+                       trigger = IRQF_TRIGGER_HIGH;
+                       irq_pol = 0;
+               }
+
+               snd_soc_update_bits(codec, WM8962_INTERRUPT_CONTROL,
+                                   WM8962_IRQ_POL, irq_pol);
+
+               ret = request_threaded_irq(i2c->irq, NULL, wm8962_irq,
+                                          trigger | IRQF_ONESHOT,
+                                          "wm8962", codec);
+               if (ret != 0) {
+                       dev_err(codec->dev, "Failed to request IRQ %d: %d\n",
+                               i2c->irq, ret);
+                       /* Non-fatal */
+               } else {
+                       /* Enable error reporting IRQs by default */
+                       snd_soc_update_bits(codec,
+                                           WM8962_INTERRUPT_STATUS_2_MASK,
+                                           WM8962_TEMP_SHUT_EINT |
+                                           WM8962_FIFOS_ERR_EINT, 0);
+               }
+       }
+
        return 0;
 
 err_enable:
@@ -1762,8 +1815,13 @@ err:
 static int wm8962_remove(struct snd_soc_codec *codec)
 {
        struct wm8962_priv *wm8962 = snd_soc_codec_get_drvdata(codec);
+       struct i2c_client *i2c = container_of(codec->dev, struct i2c_client,
+                                             dev);
        int i;
 
+       if (i2c->irq)
+               free_irq(i2c->irq, codec);
+
        wm8962_free_beep(codec);
        for (i = 0; i < ARRAY_SIZE(wm8962->supplies); i++)
                regulator_unregister_notifier(wm8962->supplies[i].consumer,