sl82c105: add speedproc() method and MWDMA0/1 support
authorSergei Shtylyov <sshtylyov@ru.mvista.com>
Tue, 15 May 2007 22:51:44 +0000 (00:51 +0200)
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Tue, 15 May 2007 22:51:44 +0000 (00:51 +0200)
Add the speedproc() method for setting transfer modes, modify config_for_dma()
to call it and use ide_max_dma_mode() to select the best DMA mode.
Add support for the multiword DMA modes 0 and 1, using the upper half of the
'drive_data' field to store the DMA timings to program into the drive control
register when DMA is turned on for real.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
drivers/ide/pci/sl82c105.c

index fe3b4b91f85463b4b5fdc68e9dced5f6384e7a5f..3d7759c361ff6a396516a28c312715b1ea95c92a 100644 (file)
@@ -82,7 +82,14 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
 
        pio = ide_get_best_pio_mode(drive, pio, 5, &p);
 
-       drive->drive_data = drv_ctrl = get_pio_timings(&p);
+       drv_ctrl = get_pio_timings(&p);
+
+       /*
+        * Store the PIO timings so that we can restore them
+        * in case DMA will be turned off...
+        */
+       drive->drive_data &= 0xffff0000;
+       drive->drive_data |= drv_ctrl;
 
        if (!drive->using_dma) {
                /*
@@ -99,15 +106,68 @@ static u8 sl82c105_tune_pio(ide_drive_t *drive, u8 pio)
        return pio;
 }
 
+/*
+ * Configure the drive and chipset for a new transfer speed.
+ */
+static int sl82c105_tune_chipset(ide_drive_t *drive, u8 speed)
+{
+       static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
+       u16 drv_ctrl;
+
+       DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
+            drive->name, ide_xfer_verbose(speed)));
+
+       speed = ide_rate_filter(drive, speed);
+
+       switch (speed) {
+       case XFER_MW_DMA_2:
+       case XFER_MW_DMA_1:
+       case XFER_MW_DMA_0:
+               drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
+
+               /*
+                * Store the DMA timings so that we can actually program
+                * them when DMA will be turned on...
+                */
+               drive->drive_data &= 0x0000ffff;
+               drive->drive_data |= (unsigned long)drv_ctrl << 16;
+
+               /*
+                * If we are already using DMA, we just reprogram
+                * the drive control register.
+                */
+               if (drive->using_dma) {
+                       struct pci_dev *dev     = HWIF(drive)->pci_dev;
+                       int reg                 = 0x44 + drive->dn * 4;
+
+                       pci_write_config_word(dev, reg, drv_ctrl);
+               }
+               break;
+       case XFER_PIO_5:
+       case XFER_PIO_4:
+       case XFER_PIO_3:
+       case XFER_PIO_2:
+       case XFER_PIO_1:
+       case XFER_PIO_0:
+               (void) sl82c105_tune_pio(drive, speed - XFER_PIO_0);
+               break;
+       default:
+               return -1;
+       }
+
+       return ide_config_drive_speed(drive, speed);
+}
+
 /*
  * Configure the drive for DMA.
- * We'll program the chipset only when DMA is actually turned on.
  */
 static int config_for_dma(ide_drive_t *drive)
 {
+       u8 speed = ide_max_dma_mode(drive);
+
        DBG(("config_for_dma(drive:%s)\n", drive->name));
 
-       if (ide_config_drive_speed(drive, XFER_MW_DMA_2) != 0)
+       if (!speed || sl82c105_tune_chipset(drive, speed))
                return 0;
 
        return ide_dma_enable(drive);
@@ -219,7 +279,7 @@ static int sl82c105_ide_dma_on(ide_drive_t *drive)
 
        rc = __ide_dma_on(drive);
        if (rc == 0) {
-               pci_write_config_word(dev, reg, 0x0200);
+               pci_write_config_word(dev, reg, drive->drive_data >> 16);
 
                printk(KERN_INFO "%s: DMA enabled\n", drive->name);
        }
@@ -357,6 +417,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
        DBG(("init_hwif_sl82c105(hwif: ide%d)\n", hwif->index));
 
        hwif->tuneproc          = &sl82c105_tune_drive;
+       hwif->speedproc         = &sl82c105_tune_chipset;
        hwif->selectproc        = &sl82c105_selectproc;
        hwif->resetproc         = &sl82c105_resetproc;
 
@@ -388,7 +449,7 @@ static void __devinit init_hwif_sl82c105(ide_hwif_t *hwif)
        }
 
        hwif->atapi_dma  = 1;
-       hwif->mwdma_mask = 0x04;
+       hwif->mwdma_mask = 0x07;
 
        hwif->ide_dma_check             = &sl82c105_ide_dma_check;
        hwif->ide_dma_on                = &sl82c105_ide_dma_on;