serial:bfin_uart: Put TX IRQ in individual platform resource.
authorSonic Zhang <sonic.zhang@analog.com>
Fri, 12 Aug 2011 03:15:51 +0000 (11:15 +0800)
committerGreg Kroah-Hartman <gregkh@suse.de>
Tue, 23 Aug 2011 17:48:31 +0000 (10:48 -0700)
Serial TX IRQ is not RX IRQ plus 1 in some blackfin chips.
Give individual platform resources to both TX and RX irqs.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drivers/tty/serial/bfin_uart.c

index e08bc046c1bd4279994b8e3fa19f1c3c0142b9d9..c7e592df42c06fa68b13e0477c9757751cfe9c2b 100644 (file)
@@ -667,17 +667,17 @@ static int bfin_serial_startup(struct uart_port *port)
                kgdboc_break_enabled = 0;
        else {
 # endif
-       if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
+       if (request_irq(uart->rx_irq, bfin_serial_rx_int, IRQF_DISABLED,
             "BFIN_UART_RX", uart)) {
                printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
                return -EBUSY;
        }
 
        if (request_irq
-           (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
+           (uart->tx_irq, bfin_serial_tx_int, IRQF_DISABLED,
             "BFIN_UART_TX", uart)) {
                printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n");
-               free_irq(uart->port.irq, uart);
+               free_irq(uart->rx_irq, uart);
                return -EBUSY;
        }
 
@@ -692,7 +692,7 @@ static int bfin_serial_startup(struct uart_port *port)
                 */
                unsigned uart_dma_ch_rx, uart_dma_ch_tx;
 
-               switch (uart->port.irq) {
+               switch (uart->rx_irq) {
                case IRQ_UART3_RX:
                        uart_dma_ch_rx = CH_UART3_RX;
                        uart_dma_ch_tx = CH_UART3_TX;
@@ -709,16 +709,16 @@ static int bfin_serial_startup(struct uart_port *port)
                if (uart_dma_ch_rx &&
                        request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
                        printk(KERN_NOTICE"Fail to attach UART interrupt\n");
-                       free_irq(uart->port.irq, uart);
-                       free_irq(uart->port.irq + 1, uart);
+                       free_irq(uart->rx_irq, uart);
+                       free_irq(uart->tx_irq, uart);
                        return -EBUSY;
                }
                if (uart_dma_ch_tx &&
                        request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
                        printk(KERN_NOTICE "Fail to attach UART interrupt\n");
                        free_dma(uart_dma_ch_rx);
-                       free_irq(uart->port.irq, uart);
-                       free_irq(uart->port.irq + 1, uart);
+                       free_irq(uart->rx_irq, uart);
+                       free_irq(uart->tx_irq, uart);
                        return -EBUSY;
                }
        }
@@ -785,8 +785,8 @@ static void bfin_serial_shutdown(struct uart_port *port)
                break;
        };
 #endif
-       free_irq(uart->port.irq, uart);
-       free_irq(uart->port.irq+1, uart);
+       free_irq(uart->rx_irq, uart);
+       free_irq(uart->tx_irq, uart);
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
@@ -1319,14 +1319,22 @@ static int bfin_serial_probe(struct platform_device *pdev)
                }
                uart->port.mapbase = res->start;
 
-               uart->port.irq = platform_get_irq(pdev, 0);
-               if (uart->port.irq < 0) {
-                       dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n");
+               uart->tx_irq = platform_get_irq(pdev, 0);
+               if (uart->tx_irq < 0) {
+                       dev_err(&pdev->dev, "No uart TX IRQ specified\n");
                        ret = -ENOENT;
                        goto out_error_unmap;
                }
 
-               uart->status_irq = platform_get_irq(pdev, 1);
+               uart->rx_irq = platform_get_irq(pdev, 1);
+               if (uart->rx_irq < 0) {
+                       dev_err(&pdev->dev, "No uart RX IRQ specified\n");
+                       ret = -ENOENT;
+                       goto out_error_unmap;
+               }
+               uart->port.irq = uart->rx_irq;
+
+               uart->status_irq = platform_get_irq(pdev, 2);
                if (uart->status_irq < 0) {
                        dev_err(&pdev->dev, "No uart status IRQ specified\n");
                        ret = -ENOENT;