OMAP: Serial: Define OMAP uart MDR1 reg and remove magic numbers
authorAndrei Emeltchenko <andrei.emeltchenko@nokia.com>
Tue, 30 Nov 2010 22:11:49 +0000 (14:11 -0800)
committerTony Lindgren <tony@atomide.com>
Tue, 30 Nov 2010 22:11:49 +0000 (14:11 -0800)
Define MDR1 register serial definitions used in serial and
bluetooth drivers.
Change magic number to ones defined in serial_reg for omap1/2
serial driver.
Remove redefined MDR1 register definitions in omap-serial driver.

Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Acked-by: G, Manjunath Kondaiah <manjugk@ti.com>
Acked-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap1/serial.c
arch/arm/mach-omap2/serial.c
arch/arm/plat-omap/include/plat/omap-serial.h
drivers/serial/omap-serial.c
include/linux/serial_reg.h

index b78d0749f13d9bd4a80c8dd250ac531123c869ad..c73d1b77b3647c4117fa33124a7a630f370c6a42 100644 (file)
@@ -52,9 +52,11 @@ static inline void omap_serial_outp(struct plat_serial8250_port *p, int offset,
  */
 static void __init omap_serial_reset(struct plat_serial8250_port *p)
 {
-       omap_serial_outp(p, UART_OMAP_MDR1, 0x07);      /* disable UART */
+       omap_serial_outp(p, UART_OMAP_MDR1,
+                       UART_OMAP_MDR1_DISABLE);        /* disable UART */
        omap_serial_outp(p, UART_OMAP_SCR, 0x08);       /* TX watermark */
-       omap_serial_outp(p, UART_OMAP_MDR1, 0x00);      /* enable UART */
+       omap_serial_outp(p, UART_OMAP_MDR1,
+                       UART_OMAP_MDR1_16X_MODE);       /* enable UART */
 
        if (!cpu_is_omap15xx()) {
                omap_serial_outp(p, UART_OMAP_SYSC, 0x01);
index d17960a1be25814e25750270beefc4af35d1c70f..fa9806250b50ab6028368c30cc4bc69dc8a6e5e0 100644 (file)
@@ -169,9 +169,9 @@ static inline void serial_write_reg(struct omap_uart_state *uart, int offset,
 
 static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 {
-       serial_write_reg(uart, UART_OMAP_MDR1, 0x07);
+       serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
        serial_write_reg(uart, UART_OMAP_SCR, 0x08);
-       serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
+       serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
 }
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
@@ -247,9 +247,10 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
        uart->context_valid = 0;
 
        if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
-               omap_uart_mdr1_errataset(uart, 0x07, 0xA0);
+               omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_DISABLE, 0xA0);
        else
-               serial_write_reg(uart, UART_OMAP_MDR1, 0x7);
+               serial_write_reg(uart, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
+
        serial_write_reg(uart, UART_LCR, 0xBF); /* Config B mode */
        efr = serial_read_reg(uart, UART_EFR);
        serial_write_reg(uart, UART_EFR, UART_EFR_ECB);
@@ -268,11 +269,13 @@ static void omap_uart_restore_context(struct omap_uart_state *uart)
        serial_write_reg(uart, UART_OMAP_SCR, uart->scr);
        serial_write_reg(uart, UART_OMAP_WER, uart->wer);
        serial_write_reg(uart, UART_OMAP_SYSC, uart->sysc);
+
        if (uart->errata & UART_ERRATA_i202_MDR1_ACCESS)
-               omap_uart_mdr1_errataset(uart, 0x00, 0xA1);
+               omap_uart_mdr1_errataset(uart, UART_OMAP_MDR1_16X_MODE, 0xA1);
        else
                /* UART 16x mode */
-               serial_write_reg(uart, UART_OMAP_MDR1, 0x00);
+               serial_write_reg(uart, UART_OMAP_MDR1,
+                               UART_OMAP_MDR1_16X_MODE);
 }
 #else
 static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
index c8dae02f0704799e3a60dc5df2716ffd427b5cec..6a17880146111ddfabef564583e464c1c75bb379 100644 (file)
@@ -31,9 +31,6 @@
  */
 #define OMAP_SERIAL_NAME       "ttyO"
 
-#define OMAP_MDR1_DISABLE      0x07
-#define OMAP_MDR1_MODE13X      0x03
-#define OMAP_MDR1_MODE16X      0x00
 #define OMAP_MODE13X_SPEED     230400
 
 /*
index 14365f72b66463ac8f08449820cde53ef3fe20ae..03a96db67de4a5b3120e094b25e10e2364b8be86 100644 (file)
@@ -753,7 +753,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 
        /* Protocol, Baud Rate, and Interrupt Settings */
 
-       serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_DISABLE);
+       serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
        serial_out(up, UART_LCR, OMAP_UART_LCR_CONF_MDB);
 
        up->efr = serial_in(up, UART_EFR);
@@ -774,9 +774,9 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
        serial_out(up, UART_LCR, cval);
 
        if (baud > 230400 && baud != 3000000)
-               serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE13X);
+               serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
        else
-               serial_out(up, UART_OMAP_MDR1, OMAP_MDR1_MODE16X);
+               serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
 
        /* Hardware Flow Control Configuration */
 
index c7a0ce11cd47b15b7187572db9285abd9c2cd469..6f3823474e6c070bd8456d4dd70559f4e18f2500 100644 (file)
 #define UART_OMAP_SYSS         0x16    /* System status register */
 #define UART_OMAP_WER          0x17    /* Wake-up enable register */
 
+/*
+ * These are the definitions for the MDR1 register
+ */
+#define UART_OMAP_MDR1_16X_MODE                0x00    /* UART 16x mode */
+#define UART_OMAP_MDR1_SIR_MODE                0x01    /* SIR mode */
+#define UART_OMAP_MDR1_16X_ABAUD_MODE  0x02    /* UART 16x auto-baud */
+#define UART_OMAP_MDR1_13X_MODE                0x03    /* UART 13x mode */
+#define UART_OMAP_MDR1_MIR_MODE                0x04    /* MIR mode */
+#define UART_OMAP_MDR1_FIR_MODE                0x05    /* FIR mode */
+#define UART_OMAP_MDR1_CIR_MODE                0x06    /* CIR mode */
+#define UART_OMAP_MDR1_DISABLE         0x07    /* Disable (default state) */
+
 #endif /* _LINUX_SERIAL_REG_H */