PCI PM: Make pci_set_power_state() handle devices with no PM support
authorRafael J. Wysocki <rjw@sisk.pl>
Mon, 16 Mar 2009 21:40:36 +0000 (22:40 +0100)
committerRafael J. Wysocki <rjw@sisk.pl>
Mon, 30 Mar 2009 19:46:56 +0000 (21:46 +0200)
There is a problem with PCI devices without any PM support (either
native or through the platform) that pci_set_power_state() always
returns error code for them, even if they are being put into D0.
However, such devices are always in D0, so pci_set_power_state()
should return success when attempting to put such a device into D0.
It also should update the current_state field for these devices as
appropriate.  This modification is necessary so that the standard
configuration registers of these devices are successfully restored by
pci_restore_standard_config() during the "early" phase of resume.

In addition, pci_set_power_state() should check the value of
current_state before calling the platform to change the power state
of the device to avoid doing that unnecessarily.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
drivers/pci/pci.c

index a4ecc2f151268b51b763a936947db5c013fbfe6e..979ceb1d37e807d9e63aacd79d6a406b30b3fccc 100644 (file)
@@ -439,6 +439,10 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
        u16 pmcsr;
        bool need_restore = false;
 
+       /* Check if we're already there */
+       if (dev->current_state == state)
+               return 0;
+
        if (!dev->pm_cap)
                return -EIO;
 
@@ -449,10 +453,7 @@ static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state)
         * Can enter D0 from any state, but if we can only go deeper 
         * to sleep if we're already in a low power state
         */
-       if (dev->current_state == state) {
-               /* we're already there */
-               return 0;
-       } else if (state != PCI_D0 && dev->current_state <= PCI_D3cold
+       if (state != PCI_D0 && dev->current_state <= PCI_D3cold
            && dev->current_state > state) {
                dev_err(&dev->dev, "invalid power transition "
                        "(from state %d to %d)\n", dev->current_state, state);
@@ -570,12 +571,17 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state)
                 */
                return 0;
 
-       if (state == PCI_D0 && platform_pci_power_manageable(dev)) {
+       /* Check if we're already there */
+       if (dev->current_state == state)
+               return 0;
+
+       if (state == PCI_D0) {
                /*
                 * Allow the platform to change the state, for example via ACPI
                 * _PR0, _PS0 and some such, but do not trust it.
                 */
-               int ret = platform_pci_set_power_state(dev, PCI_D0);
+               int ret = platform_pci_power_manageable(dev) ?
+                       platform_pci_set_power_state(dev, PCI_D0) : 0;
                if (!ret)
                        pci_update_current_state(dev, PCI_D0);
        }