clk: at91: add slow clk documentation
authorBoris BREZILLON <boris.brezillon@free-electrons.com>
Tue, 22 Apr 2014 13:12:33 +0000 (15:12 +0200)
committerNicolas Ferre <nicolas.ferre@atmel.com>
Wed, 7 May 2014 16:27:51 +0000 (18:27 +0200)
Add slow clk, and slow oscillators documentation.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Mike Turquette <mturquette@linaro.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Documentation/devicetree/bindings/clock/at91-clock.txt

index 26d2c8408064c3dab63d818382f69721e853f50d..27f9a27bb754a5143922532ca1cc91b23c617994 100644 (file)
@@ -6,6 +6,16 @@ This binding uses the common clock binding[1].
 
 Required properties:
 - compatible : shall be one of the following:
+       "atmel,at91sam9x5-sckc":
+               at91 SCKC (Slow Clock Controller)
+               This node contains the slow clock definitions.
+
+       "atmel,at91sam9x5-clk-slow-osc":
+               at91 slow oscillator
+
+       "atmel,at91sam9x5-clk-slow-rc-osc":
+               at91 internal slow RC oscillator
+
        "atmel,at91rm9200-pmc" or
        "atmel,at91sam9g45-pmc" or
        "atmel,at91sam9n12-pmc" or
@@ -15,6 +25,11 @@ Required properties:
                All at91 specific clocks (clocks defined below) must be child
                node of the PMC node.
 
+       "atmel,at91sam9x5-clk-slow" (under sckc node)
+       or
+       "atmel,at91sam9260-clk-slow" (under pmc node):
+               at91 slow clk
+
        "atmel,at91rm9200-clk-main-osc"
        "atmel,at91sam9x5-clk-main-rc-osc"
                at91 main clk sources
@@ -59,6 +74,63 @@ Required properties:
        "atmel,at91sam9x5-clk-utmi":
                at91 utmi clock
 
+Required properties for SCKC node:
+- reg : defines the IO memory reserved for the SCKC.
+- #size-cells : shall be 0 (reg is used to encode clk id).
+- #address-cells : shall be 1 (reg is used to encode clk id).
+
+
+For example:
+       sckc: sckc@fffffe50 {
+               compatible = "atmel,sama5d3-pmc";
+               reg = <0xfffffe50 0x4>
+               #size-cells = <0>;
+               #address-cells = <1>;
+
+               /* put at91 slow clocks here */
+       };
+
+
+Required properties for internal slow RC oscillator:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clock-frequency : define the internal RC oscillator frequency.
+
+Optional properties:
+- clock-accuracy : define the internal RC oscillator accuracy.
+
+For example:
+       slow_rc_osc: slow_rc_osc {
+               compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
+               clock-frequency = <32768>;
+               clock-accuracy = <50000000>;
+       };
+
+Required properties for slow oscillator:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall encode the main osc source clk sources (see atmel datasheet).
+
+Optional properties:
+- atmel,osc-bypass : boolean property. Set this when a clock signal is directly
+  provided on XIN.
+
+For example:
+       slow_osc: slow_osc {
+               compatible = "atmel,at91rm9200-clk-slow-osc";
+               #clock-cells = <0>;
+               clocks = <&slow_xtal>;
+       };
+
+Required properties for slow clock:
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : shall encode the slow clk sources (see atmel datasheet).
+
+For example:
+       clk32k: slck {
+               compatible = "atmel,at91sam9x5-clk-slow";
+               #clock-cells = <0>;
+               clocks = <&slow_rc_osc &slow_osc>;
+       };
+
 Required properties for PMC node:
 - reg : defines the IO memory reserved for the PMC.
 - #size-cells : shall be 0 (reg is used to encode clk id).