e1000e: helper functions for accessing EMI registers
authorBruce Allan <bruce.w.allan@intel.com>
Wed, 5 Dec 2012 06:25:58 +0000 (06:25 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Wed, 16 Jan 2013 05:47:20 +0000 (21:47 -0800)
The Extended Management Interface (EMI) registers are accessed by first
writing the EMI register offset to the EMI_ADDR regiter and then either
reading or writing the data to/from the EMI_DATA register.  Add helper
functions for performing these steps and convert existing EMI register
accesses accordingly.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/e1000e/ich8lan.c

index 7d5f6b7856e60e1c1f7f3782433c18b1e14646db..8004d7113c396541139226248139a8a6e4f6d650 100644 (file)
 #define I82579_LPI_CTRL_ENABLE_MASK            0x6000
 #define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT   0x80
 
-/* EMI Registers */
+/* Extended Management Interface (EMI) Registers */
 #define I82579_EMI_ADDR         0x10
 #define I82579_EMI_DATA         0x11
 #define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
@@ -788,6 +788,58 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_hw *hw)
        return 0;
 }
 
+/**
+ *  __e1000_access_emi_reg_locked - Read/write EMI register
+ *  @hw: pointer to the HW structure
+ *  @addr: EMI address to program
+ *  @data: pointer to value to read/write from/to the EMI address
+ *  @read: boolean flag to indicate read or write
+ *
+ *  This helper function assumes the SW/FW/HW Semaphore is already acquired.
+ **/
+static s32 __e1000_access_emi_reg_locked(struct e1000_hw *hw, u16 address,
+                                        u16 *data, bool read)
+{
+       s32 ret_val = 0;
+
+       ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, address);
+       if (ret_val)
+               return ret_val;
+
+       if (read)
+               ret_val = e1e_rphy_locked(hw, I82579_EMI_DATA, data);
+       else
+               ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, *data);
+
+       return ret_val;
+}
+
+/**
+ *  e1000_read_emi_reg_locked - Read Extended Management Interface register
+ *  @hw: pointer to the HW structure
+ *  @addr: EMI address to program
+ *  @data: value to be read from the EMI address
+ *
+ *  Assumes the SW/FW/HW Semaphore is already acquired.
+ **/
+static s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data)
+{
+       return __e1000_access_emi_reg_locked(hw, addr, data, true);
+}
+
+/**
+ *  e1000_write_emi_reg_locked - Write Extended Management Interface register
+ *  @hw: pointer to the HW structure
+ *  @addr: EMI address to program
+ *  @data: value to be written to the EMI address
+ *
+ *  Assumes the SW/FW/HW Semaphore is already acquired.
+ **/
+static s32 e1000_write_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 data)
+{
+       return __e1000_access_emi_reg_locked(hw, addr, &data, false);
+}
+
 /**
  *  e1000_set_eee_pchlan - Enable/disable EEE support
  *  @hw: pointer to the HW structure
@@ -823,11 +875,11 @@ static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        return ret_val;
-               ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR,
-                                         I217_EEE_LP_ABILITY);
+               ret_val = e1000_read_emi_reg_locked(hw,
+                                                   I217_EEE_LP_ABILITY,
+                                                   &dev_spec->eee_lp_ability);
                if (ret_val)
                        goto release;
-               e1e_rphy_locked(hw, I82579_EMI_DATA, &dev_spec->eee_lp_ability);
 
                /* EEE is not supported in 100Half, so ignore partner's EEE
                 * in 100 ability if full-duplex is not advertised.
@@ -1987,18 +2039,12 @@ static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
        ret_val = hw->phy.ops.acquire(hw);
        if (ret_val)
                return ret_val;
-       ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_THRESHOLD);
-       if (ret_val)
-               goto release;
        /* set MSE higher to enable link to stay up when noise is high */
-       ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0034);
-       if (ret_val)
-               goto release;
-       ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR, I82579_MSE_LINK_DOWN);
+       ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_THRESHOLD, 0x0034);
        if (ret_val)
                goto release;
        /* drop link after 5 times MSE threshold was reached */
-       ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x0005);
+       ret_val = e1000_write_emi_reg_locked(hw, I82579_MSE_LINK_DOWN, 0x0005);
 release:
        hw->phy.ops.release(hw);
 
@@ -2172,10 +2218,9 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
                ret_val = hw->phy.ops.acquire(hw);
                if (ret_val)
                        return ret_val;
-               ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR,
-                                         I82579_LPI_UPDATE_TIMER);
-               if (!ret_val)
-                       ret_val = e1e_wphy_locked(hw, I82579_EMI_DATA, 0x1387);
+               ret_val = e1000_write_emi_reg_locked(hw,
+                                                    I82579_LPI_UPDATE_TIMER,
+                                                    0x1387);
                hw->phy.ops.release(hw);
        }
 
@@ -4013,11 +4058,12 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
                if (!dev_spec->eee_disable) {
                        u16 eee_advert;
 
-                       ret_val = e1e_wphy_locked(hw, I82579_EMI_ADDR,
-                                                 I217_EEE_ADVERTISEMENT);
+                       ret_val =
+                           e1000_read_emi_reg_locked(hw,
+                                                     I217_EEE_ADVERTISEMENT,
+                                                     &eee_advert);
                        if (ret_val)
                                goto release;
-                       e1e_rphy_locked(hw, I82579_EMI_DATA, &eee_advert);
 
                        /* Disable LPLU if both link partners support 100BaseT
                         * EEE and 100Full is advertised on both ends of the