omap3: nand: prefetch in irq mode support
authorSukumar Ghorai <s-ghorai@ti.com>
Fri, 28 Jan 2011 10:12:06 +0000 (15:42 +0530)
committerTony Lindgren <tony@atomide.com>
Thu, 17 Feb 2011 23:32:53 +0000 (15:32 -0800)
This patch enable prefetch-irq mode for nand transfer(read, write)

Signed-off-by: Vimal Singh <vimalsingh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap2/board-flash.c
arch/arm/plat-omap/include/plat/nand.h
drivers/mtd/nand/omap2.c

index f6b72533c089a12ceae19d6c45cf19156a5ac100..19645095d597aafae3b1ca07842cac0c529cc4c4 100644 (file)
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <plat/irqs.h>
 
 #include <plat/gpmc.h>
 #include <plat/nand.h>
@@ -147,6 +148,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
        board_nand_data.nr_parts        = nr_parts;
        board_nand_data.devsize         = nand_type;
 
+       board_nand_data.gpmc_irq = OMAP_GPMC_IRQ_BASE + cs;
        gpmc_nand_init(&board_nand_data);
 }
 #else
index 78c0bdb98c1810122d8bc4b6ab8336a638d752ac..ae5e05383031df36fb9d610c0437ee6e057f96a2 100644 (file)
@@ -13,7 +13,8 @@
 enum nand_io {
        NAND_OMAP_PREFETCH_POLLED = 0,  /* prefetch polled mode, default */
        NAND_OMAP_POLLED,               /* polled mode, without prefetch */
-       NAND_OMAP_PREFETCH_DMA          /* prefetch enabled sDMA mode */
+       NAND_OMAP_PREFETCH_DMA,         /* prefetch enabled sDMA mode */
+       NAND_OMAP_PREFETCH_IRQ          /* prefetch enabled irq mode */
 };
 
 struct omap_nand_platform_data {
@@ -26,6 +27,7 @@ struct omap_nand_platform_data {
        int                     (*nand_setup)(void);
        int                     (*dev_ready)(struct omap_nand_platform_data *);
        int                     dma_channel;
+       int                     gpmc_irq;
        enum nand_io            xfer_type;
        unsigned long           phys_base;
        int                     devsize;
index 60bac8e6e9fa737bb5d280ea0bd7b08686fb3ff6..fbe841467175949456dd31aff4df968c060f2291 100644 (file)
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/delay.h>
+#include <linux/interrupt.h>
 #include <linux/jiffies.h>
 #include <linux/sched.h>
 #include <linux/mtd/mtd.h>
@@ -24,6 +25,7 @@
 #include <plat/nand.h>
 
 #define        DRIVER_NAME     "omap2-nand"
+#define        OMAP_NAND_TIMEOUT_MS    5000
 
 #define NAND_Ecc_P1e           (1 << 0)
 #define NAND_Ecc_P2e           (1 << 1)
@@ -108,6 +110,13 @@ struct omap_nand_info {
        unsigned long                   phys_base;
        struct completion               comp;
        int                             dma_ch;
+       int                             gpmc_irq;
+       enum {
+               OMAP_NAND_IO_READ = 0,  /* read */
+               OMAP_NAND_IO_WRITE,     /* write */
+       } iomode;
+       u_char                          *buf;
+       int                                     buf_len;
 };
 
 /**
@@ -267,9 +276,10 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 {
        struct omap_nand_info *info = container_of(mtd,
                                                struct omap_nand_info, mtd);
-       uint32_t pref_count = 0, w_count = 0;
+       uint32_t w_count = 0;
        int i = 0, ret = 0;
        u16 *p;
+       unsigned long tim, limit;
 
        /* take care of subpage writes */
        if (len % 2 != 0) {
@@ -295,9 +305,12 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
                                iowrite16(*p++, info->nand.IO_ADDR_W);
                }
                /* wait for data to flushed-out before reset the prefetch */
-               do {
-                       pref_count = gpmc_read_status(GPMC_PREFETCH_COUNT);
-               } while (pref_count);
+               tim = 0;
+               limit = (loops_per_jiffy *
+                                       msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+               while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+                       cpu_relax();
+
                /* disable and stop the PFPW engine */
                gpmc_prefetch_reset(info->gpmc_cs);
        }
@@ -326,11 +339,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 {
        struct omap_nand_info *info = container_of(mtd,
                                        struct omap_nand_info, mtd);
-       uint32_t prefetch_status = 0;
        enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
                                                        DMA_FROM_DEVICE;
        dma_addr_t dma_addr;
        int ret;
+       unsigned long tim, limit;
 
        /* The fifo depth is 64 bytes. We have a sync at each frame and frame
         * length is 64 bytes.
@@ -376,7 +389,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
        /*  configure and start prefetch transfer */
        ret = gpmc_prefetch_enable(info->gpmc_cs, 0x1, len, is_write);
        if (ret)
-               /* PFPW engine is busy, use cpu copy methode */
+               /* PFPW engine is busy, use cpu copy method */
                goto out_copy;
 
        init_completion(&info->comp);
@@ -385,10 +398,11 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 
        /* setup and start DMA using dma_addr */
        wait_for_completion(&info->comp);
+       tim = 0;
+       limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+       while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+               cpu_relax();
 
-       do {
-               prefetch_status = gpmc_read_status(GPMC_PREFETCH_COUNT);
-       } while (prefetch_status);
        /* disable and stop the PFPW engine */
        gpmc_prefetch_reset(info->gpmc_cs);
 
@@ -436,6 +450,155 @@ static void omap_write_buf_dma_pref(struct mtd_info *mtd,
                omap_nand_dma_transfer(mtd, (u_char *) buf, len, 0x1);
 }
 
+/*
+ * omap_nand_irq - GMPC irq handler
+ * @this_irq: gpmc irq number
+ * @dev: omap_nand_info structure pointer is passed here
+ */
+static irqreturn_t omap_nand_irq(int this_irq, void *dev)
+{
+       struct omap_nand_info *info = (struct omap_nand_info *) dev;
+       u32 bytes;
+       u32 irq_stat;
+
+       irq_stat = gpmc_read_status(GPMC_GET_IRQ_STATUS);
+       bytes = gpmc_read_status(GPMC_PREFETCH_FIFO_CNT);
+       bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
+       if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
+               if (irq_stat & 0x2)
+                       goto done;
+
+               if (info->buf_len && (info->buf_len < bytes))
+                       bytes = info->buf_len;
+               else if (!info->buf_len)
+                       bytes = 0;
+               iowrite32_rep(info->nand.IO_ADDR_W,
+                                               (u32 *)info->buf, bytes >> 2);
+               info->buf = info->buf + bytes;
+               info->buf_len -= bytes;
+
+       } else {
+               ioread32_rep(info->nand.IO_ADDR_R,
+                                               (u32 *)info->buf, bytes >> 2);
+               info->buf = info->buf + bytes;
+
+               if (irq_stat & 0x2)
+                       goto done;
+       }
+       gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+
+       return IRQ_HANDLED;
+
+done:
+       complete(&info->comp);
+       /* disable irq */
+       gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ, 0);
+
+       /* clear status */
+       gpmc_cs_configure(info->gpmc_cs, GPMC_SET_IRQ_STATUS, irq_stat);
+
+       return IRQ_HANDLED;
+}
+
+/*
+ * omap_read_buf_irq_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+       struct omap_nand_info *info = container_of(mtd,
+                                               struct omap_nand_info, mtd);
+       int ret = 0;
+
+       if (len <= mtd->oobsize) {
+               omap_read_buf_pref(mtd, buf, len);
+               return;
+       }
+
+       info->iomode = OMAP_NAND_IO_READ;
+       info->buf = buf;
+       init_completion(&info->comp);
+
+       /*  configure and start prefetch transfer */
+       ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x0);
+       if (ret)
+               /* PFPW engine is busy, use cpu copy method */
+               goto out_copy;
+
+       info->buf_len = len;
+       /* enable irq */
+       gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
+               (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+       /* waiting for read to complete */
+       wait_for_completion(&info->comp);
+
+       /* disable and stop the PFPW engine */
+       gpmc_prefetch_reset(info->gpmc_cs);
+       return;
+
+out_copy:
+       if (info->nand.options & NAND_BUSWIDTH_16)
+               omap_read_buf16(mtd, buf, len);
+       else
+               omap_read_buf8(mtd, buf, len);
+}
+
+/*
+ * omap_write_buf_irq_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_irq_pref(struct mtd_info *mtd,
+                                       const u_char *buf, int len)
+{
+       struct omap_nand_info *info = container_of(mtd,
+                                               struct omap_nand_info, mtd);
+       int ret = 0;
+       unsigned long tim, limit;
+
+       if (len <= mtd->oobsize) {
+               omap_write_buf_pref(mtd, buf, len);
+               return;
+       }
+
+       info->iomode = OMAP_NAND_IO_WRITE;
+       info->buf = (u_char *) buf;
+       init_completion(&info->comp);
+
+       /*  configure and start prefetch transfer */
+       ret = gpmc_prefetch_enable(info->gpmc_cs, 0x0, len, 0x1);
+       if (ret)
+               /* PFPW engine is busy, use cpu copy method */
+               goto out_copy;
+
+       info->buf_len = len;
+       /* enable irq */
+       gpmc_cs_configure(info->gpmc_cs, GPMC_ENABLE_IRQ,
+                       (GPMC_IRQ_FIFOEVENTENABLE | GPMC_IRQ_COUNT_EVENT));
+
+       /* waiting for write to complete */
+       wait_for_completion(&info->comp);
+       /* wait for data to flushed-out before reset the prefetch */
+       tim = 0;
+       limit = (loops_per_jiffy *  msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+       while (gpmc_read_status(GPMC_PREFETCH_COUNT) && (tim++ < limit))
+               cpu_relax();
+
+       /* disable and stop the PFPW engine */
+       gpmc_prefetch_reset(info->gpmc_cs);
+       return;
+
+out_copy:
+       if (info->nand.options & NAND_BUSWIDTH_16)
+               omap_write_buf16(mtd, buf, len);
+       else
+               omap_write_buf8(mtd, buf, len);
+}
+
 /**
  * omap_verify_buf - Verify chip data against buffer
  * @mtd: MTD device structure
@@ -846,6 +1009,20 @@ static int __devinit omap_nand_probe(struct platform_device *pdev)
                }
                break;
 
+       case NAND_OMAP_PREFETCH_IRQ:
+               err = request_irq(pdata->gpmc_irq,
+                               omap_nand_irq, IRQF_SHARED, "gpmc-nand", info);
+               if (err) {
+                       dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+                                                       pdata->gpmc_irq, err);
+                       goto out_release_mem_region;
+               } else {
+                       info->gpmc_irq       = pdata->gpmc_irq;
+                       info->nand.read_buf  = omap_read_buf_irq_pref;
+                       info->nand.write_buf = omap_write_buf_irq_pref;
+               }
+               break;
+
        default:
                dev_err(&pdev->dev,
                        "xfer_type(%d) not supported!\n", pdata->xfer_type);
@@ -911,6 +1088,9 @@ static int omap_nand_remove(struct platform_device *pdev)
        if (info->dma_ch != -1)
                omap_free_dma(info->dma_ch);
 
+       if (info->gpmc_irq)
+               free_irq(info->gpmc_irq, info);
+
        /* Release NAND device, its internal structures and partitions */
        nand_release(&info->mtd);
        iounmap(info->nand.IO_ADDR_R);