drm/radeon/kms: fix up r1xx-rs4xx i2c buses
authorAlex Deucher <alexdeucher@gmail.com>
Tue, 3 May 2011 23:47:44 +0000 (19:47 -0400)
committerDave Airlie <airlied@redhat.com>
Wed, 4 May 2011 03:21:26 +0000 (13:21 +1000)
Fix the vbios mapping and only add the actual
buses that the cards have.  The existing code was
mostly correct.  Just clean up a few cases on r2xx/r3xx
and document that buses the hw actually has.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drivers/gpu/drm/radeon/radeon_combios.c

index 089ab92ad084f2eeeb4e10cee5a6e3af5fb4ed29..0e350b74ea2ececb9011b69f72c1621225e935c9 100644 (file)
@@ -505,12 +505,18 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
         * DDC_VGA           = RADEON_GPIO_VGA_DDC
         * DDC_LCD           = RADEON_GPIOPAD_MASK
         * DDC_GPIO          = RADEON_MDGPIO_MASK
-        * r1xx/r2xx
+        * r1xx
         * DDC_MONID         = RADEON_GPIO_MONID
         * DDC_CRT2          = RADEON_GPIO_CRT2_DDC
-        * r3xx
+        * r200
         * DDC_MONID         = RADEON_GPIO_MONID
         * DDC_CRT2          = RADEON_GPIO_DVI_DDC
+        * r300/r350
+        * DDC_MONID         = RADEON_GPIO_DVI_DDC
+        * DDC_CRT2          = RADEON_GPIO_DVI_DDC
+        * rv2xx/rv3xx
+        * DDC_MONID         = RADEON_GPIO_MONID
+        * DDC_CRT2          = RADEON_GPIO_MONID
         * rs3xx/rs4xx
         * DDC_MONID         = RADEON_GPIOPAD_MASK
         * DDC_CRT2          = RADEON_GPIO_MONID
@@ -537,18 +543,21 @@ static struct radeon_i2c_bus_rec combios_setup_i2c_bus(struct radeon_device *rde
                    rdev->family == CHIP_RS400 ||
                    rdev->family == CHIP_RS480)
                        ddc_line = RADEON_GPIOPAD_MASK;
+               else if (rdev->family == CHIP_R300 ||
+                        rdev->family == CHIP_R350)
+                       ddc_line = RADEON_GPIO_DVI_DDC;
                else
                        ddc_line = RADEON_GPIO_MONID;
                break;
        case DDC_CRT2:
-               if (rdev->family == CHIP_RS300 ||
-                   rdev->family == CHIP_RS400 ||
-                   rdev->family == CHIP_RS480)
-                       ddc_line = RADEON_GPIO_MONID;
-               else if (rdev->family >= CHIP_R300) {
+               if (rdev->family == CHIP_R200 ||
+                   rdev->family == CHIP_R300 ||
+                   rdev->family == CHIP_R350)
                        ddc_line = RADEON_GPIO_DVI_DDC;
-                       ddc = DDC_DVI;
-               } else
+               else if (rdev->family == CHIP_RS300 ||
+                        rdev->family >= CHIP_RV350)
+                       ddc_line = RADEON_GPIO_MONID;
+               else
                        ddc_line = RADEON_GPIO_CRT2_DDC;
                break;
        }
@@ -709,26 +718,42 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
        struct drm_device *dev = rdev->ddev;
        struct radeon_i2c_bus_rec i2c;
 
+       /* actual hw pads
+        * r1xx/rs2xx/rs3xx
+        * 0x60, 0x64, 0x68, 0x6c, gpiopads, mm
+        * r200
+        * 0x60, 0x64, 0x68, mm
+        * r300/r350
+        * 0x60, 0x64, mm
+        * rv2xx/rv3xx/rs4xx
+        * 0x60, 0x64, 0x68, gpiopads, mm
+        */
 
+       /* 0x60 */
        i2c = combios_setup_i2c_bus(rdev, DDC_DVI, 0, 0);
        rdev->i2c_bus[0] = radeon_i2c_create(dev, &i2c, "DVI_DDC");
-
+       /* 0x64 */
        i2c = combios_setup_i2c_bus(rdev, DDC_VGA, 0, 0);
        rdev->i2c_bus[1] = radeon_i2c_create(dev, &i2c, "VGA_DDC");
 
+       /* mm i2c */
        i2c.valid = true;
        i2c.hw_capable = true;
        i2c.mm_i2c = true;
        i2c.i2c_id = 0xa0;
        rdev->i2c_bus[2] = radeon_i2c_create(dev, &i2c, "MM_I2C");
 
-       if (rdev->family == CHIP_RS300 ||
-           rdev->family == CHIP_RS400 ||
-           rdev->family == CHIP_RS480) {
+       if (rdev->family == CHIP_R300 ||
+           rdev->family == CHIP_R350) {
+               /* only 2 sw i2c pads */
+       } else if (rdev->family == CHIP_RS300 ||
+                  rdev->family == CHIP_RS400 ||
+                  rdev->family == CHIP_RS480) {
                u16 offset;
                u8 id, blocks, clk, data;
                int i;
 
+               /* 0x68 */
                i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
                rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
 
@@ -740,6 +765,7 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
                                if (id == 136) {
                                        clk = RBIOS8(offset + 3 + (i * 5) + 3);
                                        data = RBIOS8(offset + 3 + (i * 5) + 4);
+                                       /* gpiopad */
                                        i2c = combios_setup_i2c_bus(rdev, DDC_MONID,
                                                                    (1 << clk), (1 << data));
                                        rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK");
@@ -747,14 +773,15 @@ void radeon_combios_i2c_init(struct radeon_device *rdev)
                                }
                        }
                }
-
-       } else if (rdev->family >= CHIP_R300) {
+       } else if (rdev->family >= CHIP_R200) {
+               /* 0x68 */
                i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
                rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
        } else {
+               /* 0x68 */
                i2c = combios_setup_i2c_bus(rdev, DDC_MONID, 0, 0);
                rdev->i2c_bus[3] = radeon_i2c_create(dev, &i2c, "MONID");
-
+               /* 0x6c */
                i2c = combios_setup_i2c_bus(rdev, DDC_CRT2, 0, 0);
                rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "CRT2_DDC");
        }