edp anx9804:add debug fs

diff --git a/drivers/video/display/transmitter/dp_rk_edp.c b/drivers/video/display/transmitter/dp_rk_edp.c
old mode 100644 (file)
new mode 100755 (executable)
index dcbe123..6663bc1
--- a/drivers/video/display/transmitter/dp_rk_edp.c
+++ b/drivers/video/display/transmitter/dp_rk_edp.c
@@ -1,5 +1,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/seq_file.h>
 #include <linux/time.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
@@ -7,6 +9,8 @@
 #include <linux/i2c.h>
 #include <linux/gpio.h>
 #include <linux/rk_edp.h>
+#include <linux/debugfs.h>
+
 
 
 int rk_edp_i2c_read_p0_reg(struct i2c_client *client, char reg, char *val)
@@ -270,9 +274,9 @@ void DP_TX_RST_AUX(struct i2c_client *client)
 
 static void DP_TX_Initialization(struct i2c_client *client)
 {
-       char val;
+       char val = 0x00;
 
-       val = 0x00; //power on all block and select DisplayPort mode
+        //power on all block and select DisplayPort mode
        val |= DP_POWERD_AUDIO_REG;
        rk_edp_i2c_write_p1_reg(client, DP_POWERD_CTRL_REG, &val );
 
@@ -1188,8 +1192,8 @@ static ssize_t rk_edp1_debug_store(struct device *dev, struct device_attribute *
 }
 
 static struct device_attribute rk_edp_attrs[] = {
-        __ATTR(rk_edp-0, S_IRUGO | S_IWUSR, rk_edp0_debug_show,rk_edp0_debug_store),
-        __ATTR(rk_edp-1,S_IRUGO | S_IWUSR, rk_edp1_debug_show,rk_edp1_debug_store),
+        __ATTR(rk_edp-0x70, S_IRUGO | S_IWUSR, rk_edp0_debug_show,rk_edp0_debug_store),
+        __ATTR(rk_edp-0x72,S_IRUGO | S_IWUSR, rk_edp1_debug_show,rk_edp1_debug_store),
 };
 
 
@@ -1212,6 +1216,49 @@ static int rk_edp_create_sysfs(struct device *dev)
         return 0;
 }
 
+static int edp_reg_show(struct seq_file *s, void *v)
+{
+       int i = 0;
+       char val;
+       struct rk_edp *rk_edp = s->private;
+       if(!rk_edp)
+       {
+               printk(KERN_ERR "no edp device!\n");
+               return 0;
+       }
+
+       seq_printf(s,"0x70:\n");
+       for(i=0;i< MAX_REG;i++)
+       {
+               rk_edp_i2c_read_p0_reg(rk_edp->client, i , &val);
+               seq_printf(s,"0x%02x>>0x%02x\n",i,val);
+       }
+
+       
+       seq_printf(s,"\n0x72:\n");
+       for(i=0;i< MAX_REG;i++)
+       {
+               rk_edp_i2c_read_p1_reg(rk_edp->client, i , &val);
+               seq_printf(s,"0x%02x>>0x%02x\n",i,val);
+       }
+       return 0;
+}
+
+static int edp_reg_open(struct inode *inode, struct file *file)
+{
+       struct rk_edp *rk_edp = inode->i_private;
+       return single_open(file, edp_reg_show, rk_edp);
+}
+
+static const struct file_operations edp_reg_fops = {
+       .owner          = THIS_MODULE,
+       .open           = edp_reg_open,
+       .read           = seq_read,
+       .llseek         = seq_lseek,
+       .release        = single_release,
+};
+
+
 #ifdef CONFIG_HAS_EARLYSUSPEND
 static void rk_edp_early_suspend(struct early_suspend *h)
 {
@@ -1264,7 +1311,8 @@ static int rk_edp_i2c_probe(struct i2c_client *client,const struct i2c_device_id
        if(rk_edp->pdata->power_ctl)
                rk_edp->pdata->power_ctl();
 
-       rk_edp_create_sysfs(&client->dev);
+       debugfs_create_file("edp-reg", S_IRUSR,NULL, rk_edp,
+                                   &edp_reg_fops);
        ret = DP_TX_Chip_Located(client);
        if(ret < 0)
        {
@@ -1278,17 +1326,27 @@ static int rk_edp_i2c_probe(struct i2c_client *client,const struct i2c_device_id
 #ifdef CONFIG_HAS_EARLYSUSPEND
        rk_edp->early_suspend.suspend = rk_edp_early_suspend;
        rk_edp->early_suspend.resume = rk_edp_late_resume;
-    rk_edp->early_suspend.level = EARLY_SUSPEND_LEVEL_STOP_DRAWING;
+       rk_edp->early_suspend.level = EARLY_SUSPEND_LEVEL_STOP_DRAWING;
        register_early_suspend(&rk_edp->early_suspend);
 #endif
+
 #if 1
        DP_TX_Initialization(client);
        DP_TX_HW_LT(client,0x06,0x04); // 1.62 Gpbs 4lane
        DP_TX_Config_Video(client);
+       
+       char val = 0x33;
+       rk_edp_i2c_write_p0_reg(client, 0x82, &val);
+       
+       val = 0x06;
+       rk_edp_i2c_write_p1_reg(client, 0xe2, &val);
+       
 #else
        RK_EDP_BIST_Format(client);
 #endif
-       
+
+       printk("edp probe ok\n");
+       //while(1);     
        return ret;
 }
 
@@ -1325,6 +1383,6 @@ static void __exit rk_edp_module_exit(void)
 }
 
 //subsys_initcall_sync(rk_edp_module_init);
-fs_initcall_sync(rk_edp_module_init);
+late_initcall_sync(rk_edp_module_init);
 module_exit(rk_edp_module_exit);
 

diff --git a/include/linux/rk_edp.h b/include/linux/rk_edp.h
old mode 100644 (file)
new mode 100755 (executable)
index 5543444..416567b
--- a/include/linux/rk_edp.h
+++ b/include/linux/rk_edp.h
@@ -14,21 +14,21 @@
 #define DP_TX_VND_IDH_REG              0x01
 #define DP_TX_DEV_IDL_REG              0x02
 #define DP_TX_DEV_IDH_REG              0x03
-#define DP_POWERD_CTRL_REG                             0x05
+#define DP_POWERD_CTRL_REG             0x05
 
 #define DP_TX_VID_CTRL1_REG            0x08
-#define DP_TX_VID_CTRL1_VID_EN                 0x80    // bit position
-#define DP_POWERD_TOTAL_REG                            0x02// bit position
-#define DP_POWERD_AUDIO_REG                            0x10// bit position
+#define DP_TX_VID_CTRL1_VID_EN         0x80    // bit position
+#define DP_POWERD_TOTAL_REG            0x02// bit position
+#define DP_POWERD_AUDIO_REG            0x10// bit position
 
 #define DP_TX_RST_CTRL_REG             0x06
-#define DP_TX_RST_CTRL2_REG                            0x07
+#define DP_TX_RST_CTRL2_REG            0x07
 #define DP_TX_RST_HW_RST               0x01    // bit position
 #define DP_TX_AUX_RST                                  0x04//bit position
 #define DP_TX_RST_SW_RST               0x02    // bit position
-#define DP_TX_PLL_CTRL_REG                             0xC7
-#define DP_TX_EXTRA_ADDR_REG                   0xCE
-#define DP_TX_PLL_FILTER_CTRL3                 0xE1
+#define DP_TX_PLL_CTRL_REG             0xC7
+#define DP_TX_EXTRA_ADDR_REG           0xCE
+#define DP_TX_PLL_FILTER_CTRL3         0xE1
 #define DP_TX_PLL_CTRL3                                        0xE6
 #define DP_TX_AC_MODE                                  0x40//bit position
 #define ANALOG_DEBUG_REG1                              0xDC