e1000e: s/w initiated LSC MSI-X interrupts not generated; no transmit
authorBruce Allan <bruce.w.allan@intel.com>
Mon, 10 May 2010 15:00:10 +0000 (15:00 +0000)
committerDavid S. Miller <davem@davemloft.net>
Thu, 13 May 2010 06:31:10 +0000 (23:31 -0700)
In MSI-X mode when an IMPI SoL session was active (i.e. the PHY reset was
blocked), the LSC interrupt generated by s/w to start the watchdog which
started the transmitter was not getting fired by the hardware because bit
24 (the 'other' cause bit) also needed to be set.  Without an active SoL
session, the PHY was reset which caused the h/w to fire the LSC interrupt.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/e1000e/netdev.c

index 36473e6d07d6cc769b37107215c36620271886a9..16a03c553299d70d6063c8de407db18f2147d6fa 100644 (file)
@@ -3220,7 +3220,11 @@ int e1000e_up(struct e1000_adapter *adapter)
        netif_wake_queue(adapter->netdev);
 
        /* fire a link change interrupt to start the watchdog */
-       ew32(ICS, E1000_ICS_LSC);
+       if (adapter->msix_entries)
+               ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
+       else
+               ew32(ICS, E1000_ICS_LSC);
+
        return 0;
 }
 
@@ -3537,7 +3541,10 @@ static int e1000_open(struct net_device *netdev)
        pm_runtime_put(&pdev->dev);
 
        /* fire a link status change interrupt to start the watchdog */
-       ew32(ICS, E1000_ICS_LSC);
+       if (adapter->msix_entries)
+               ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
+       else
+               ew32(ICS, E1000_ICS_LSC);
 
        return 0;