tg3: Create MII_TG3_FET namespace
authorMatt Carlson <mcarlson@broadcom.com>
Tue, 25 Aug 2009 10:09:36 +0000 (10:09 +0000)
committerDavid S. Miller <davem@davemloft.net>
Wed, 26 Aug 2009 22:47:58 +0000 (15:47 -0700)
Broadcom's phys come in two distinctly different register layouts.  For
the lack of an official term to distinguish between the two formats, we
can loosely categorize them by their fast ethernet or gigabit ethernet
transceiver description.  This patch creates the (driver-internal) Fast
Ethernet Transceiver (FET) namespace and converts the 5906 EPHY
definitions over.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/tg3.c
drivers/net/tg3.h

index 41e0d40259e32bb08a1b33452b8a95dacf2edfe0..800f98069c1c005cb476df615ac25123fdfecc5b 100644 (file)
@@ -1514,17 +1514,19 @@ static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
                u32 ephy;
 
-               if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &ephy)) {
-                       tg3_writephy(tp, MII_TG3_EPHY_TEST,
-                                    ephy | MII_TG3_EPHY_SHADOW_EN);
-                       if (!tg3_readphy(tp, MII_TG3_EPHYTST_MISCCTRL, &phy)) {
+               if (!tg3_readphy(tp, MII_TG3_FET_TEST, &ephy)) {
+                       u32 reg = MII_TG3_FET_SHDW_MISCCTRL;
+
+                       tg3_writephy(tp, MII_TG3_FET_TEST,
+                                    ephy | MII_TG3_FET_SHADOW_EN);
+                       if (!tg3_readphy(tp, reg, &phy)) {
                                if (enable)
-                                       phy |= MII_TG3_EPHYTST_MISCCTRL_MDIX;
+                                       phy |= MII_TG3_FET_SHDW_MISCCTRL_MDIX;
                                else
-                                       phy &= ~MII_TG3_EPHYTST_MISCCTRL_MDIX;
-                               tg3_writephy(tp, MII_TG3_EPHYTST_MISCCTRL, phy);
+                                       phy &= ~MII_TG3_FET_SHDW_MISCCTRL_MDIX;
+                               tg3_writephy(tp, reg, phy);
                        }
-                       tg3_writephy(tp, MII_TG3_EPHY_TEST, ephy);
+                       tg3_writephy(tp, MII_TG3_FET_TEST, ephy);
                }
        } else {
                phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
@@ -1915,7 +1917,7 @@ out:
 
        if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
                /* adjust output voltage */
-               tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12);
+               tg3_writephy(tp, MII_TG3_FET_PTEST, 0x12);
        }
 
        tg3_phy_toggle_automdix(tp, 1);
@@ -9747,14 +9749,16 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
                if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
                        u32 phytest;
 
-                       if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phytest)) {
-                               u32 phy;
+                       if (!tg3_readphy(tp, MII_TG3_FET_TEST, &phytest)) {
+                               u32 phy, reg = MII_TG3_FET_SHDW_AUXSTAT2;
 
-                               tg3_writephy(tp, MII_TG3_EPHY_TEST,
-                                            phytest | MII_TG3_EPHY_SHADOW_EN);
-                               if (!tg3_readphy(tp, 0x1b, &phy))
-                                       tg3_writephy(tp, 0x1b, phy & ~0x20);
-                               tg3_writephy(tp, MII_TG3_EPHY_TEST, phytest);
+                               tg3_writephy(tp, MII_TG3_FET_TEST,
+                                            phytest | MII_TG3_FET_SHADOW_EN);
+                               if (!tg3_readphy(tp, reg, &phy)) {
+                                       phy &= ~MII_TG3_FET_SHDW_AUXSTAT2_APD;
+                                       tg3_writephy(tp, reg, phy);
+                               }
+                               tg3_writephy(tp, MII_TG3_FET_TEST, phytest);
                        }
                        val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
                } else
@@ -9767,7 +9771,7 @@ static int tg3_run_loopback(struct tg3 *tp, int loopback_mode)
 
                mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
                if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
-                       tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x1800);
+                       tg3_writephy(tp, MII_TG3_FET_PTEST, 0x1800);
                        mac_mode |= MAC_MODE_PORT_MODE_MII;
                } else
                        mac_mode |= MAC_MODE_PORT_MODE_GMII;
index d096e10ad63499490f03392f6cec4c5546ae758c..b8339c9ae0e32eb4cdb082d763f069170a6e2d34 100644 (file)
 
 #define MII_TG3_DSP_RW_PORT            0x15 /* DSP coefficient read/write port */
 
-#define MII_TG3_EPHY_PTEST             0x17 /* 5906 PHY register */
 #define MII_TG3_DSP_ADDRESS            0x17 /* DSP address register */
 
 #define MII_TG3_DSP_TAP1               0x0001
 #define MII_TG3_MISC_SHDW_SCR5_LPED    0x0010
 #define MII_TG3_MISC_SHDW_SCR5_SEL     0x1400
 
-
-#define MII_TG3_EPHY_TEST              0x1f /* 5906 PHY register */
-#define MII_TG3_EPHY_SHADOW_EN         0x80
-
-#define MII_TG3_EPHYTST_MISCCTRL       0x10 /* 5906 EPHY misc ctrl shadow register */
-#define MII_TG3_EPHYTST_MISCCTRL_MDIX  0x4000
-
 #define MII_TG3_TEST1                  0x1e
 #define MII_TG3_TEST1_TRIM_EN          0x0010
 #define MII_TG3_TEST1_CRC_EN           0x8000
 
+
+/* Fast Ethernet Tranceiver definitions */
+#define MII_TG3_FET_PTEST              0x17
+#define MII_TG3_FET_TEST               0x1f
+#define  MII_TG3_FET_SHADOW_EN         0x0080
+
+#define MII_TG3_FET_SHDW_MISCCTRL      0x10
+#define  MII_TG3_FET_SHDW_MISCCTRL_MDIX        0x4000
+
+#define MII_TG3_FET_SHDW_AUXSTAT2      0x1b
+#define  MII_TG3_FET_SHDW_AUXSTAT2_APD 0x0020
+
+
 /* APE registers.  Accessible through BAR1 */
 #define TG3_APE_EVENT                  0x000c
 #define  APE_EVENT_1                    0x00000001