intel_scu_ipc: Utility driver for intel scu ipc
authorSreedhara DS <sreedhara.ds@intel.com>
Fri, 22 Oct 2010 14:43:55 +0000 (15:43 +0100)
committerMatthew Garrett <mjg@redhat.com>
Fri, 7 Jan 2011 22:03:40 +0000 (17:03 -0500)
This driver implements ioctl and interfaces with intel scu ipc driver. It
is used to access pmic/msic registers from user space and firmware update
utility.

Signed-off-by: Sreedhara DS <sreedhara.ds@intel.com>
[Extensive clean up and debug]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
drivers/platform/x86/Kconfig
drivers/platform/x86/Makefile
drivers/platform/x86/intel_scu_ipc.c
drivers/platform/x86/intel_scu_ipcutil.c [new file with mode: 0644]

index faec777b1ed433de38514c479fc17dc2ebf96c00..65ba62086ca82ca5400f764a4b8658db9a8ae427 100644 (file)
@@ -576,6 +576,15 @@ config INTEL_SCU_IPC
          some embedded Intel x86 platforms. This is not needed for PC-type
          machines.
 
+config INTEL_SCU_IPC_UTIL
+       tristate "Intel SCU IPC utility driver"
+       depends on INTEL_SCU_IPC
+       default y
+       ---help---
+         The IPC Util driver provides an interface with the SCU enabling
+         low level access for debug work and updating the firmware. Say
+         N unless you will be doing this on an Intel MID platform.
+
 config GPIO_INTEL_PMIC
        bool "Intel PMIC GPIO support"
        depends on INTEL_SCU_IPC && GPIOLIB
index 9950ccc940b5b926ad86a50c07a9651432dbea4c..4ec4ff8f918240e657153d7bdd0a11202ba8d498 100644 (file)
@@ -28,6 +28,7 @@ obj-$(CONFIG_TOPSTAR_LAPTOP)  += topstar-laptop.o
 obj-$(CONFIG_ACPI_TOSHIBA)     += toshiba_acpi.o
 obj-$(CONFIG_TOSHIBA_BT_RFKILL)        += toshiba_bluetooth.o
 obj-$(CONFIG_INTEL_SCU_IPC)    += intel_scu_ipc.o
+obj-$(CONFIG_INTEL_SCU_IPC_UTIL)+= intel_scu_ipcutil.o
 obj-$(CONFIG_RAR_REGISTER)     += intel_rar_register.o
 obj-$(CONFIG_INTEL_IPS)                += intel_ips.o
 obj-$(CONFIG_GPIO_INTEL_PMIC)  += intel_pmic_gpio.o
index ca35b0ce944a58ca017ff5b5678b73a468d7a42a..1752ef006d26e44f2154293ba9c6f052cf2480e0 100644 (file)
@@ -497,7 +497,7 @@ int intel_scu_ipc_i2c_cntrl(u32 addr, u32 *data)
                        "intel_scu_ipc: I2C INVALID_CMD = 0x%x\n", cmd);
 
                mutex_unlock(&ipclock);
-               return -1;
+               return -EIO;
        }
        mutex_unlock(&ipclock);
        return 0;
@@ -642,7 +642,7 @@ update_end:
 
        if (status == IPC_FW_UPDATE_SUCCESS)
                return 0;
-       return -1;
+       return -EIO;
 }
 EXPORT_SYMBOL(intel_scu_ipc_fw_update);
 
diff --git a/drivers/platform/x86/intel_scu_ipcutil.c b/drivers/platform/x86/intel_scu_ipcutil.c
new file mode 100644 (file)
index 0000000..ba3231d
--- /dev/null
@@ -0,0 +1,133 @@
+/*
+ * intel_scu_ipc.c: Driver for the Intel SCU IPC mechanism
+ *
+ * (C) Copyright 2008-2010 Intel Corporation
+ * Author: Sreedhara DS (sreedhara.ds@intel.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ *
+ * This driver provides ioctl interfaces to call intel scu ipc driver api
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <asm/intel_scu_ipc.h>
+
+static u32 major;
+
+#define MAX_FW_SIZE 264192
+
+/* ioctl commnds */
+#define        INTE_SCU_IPC_REGISTER_READ      0
+#define INTE_SCU_IPC_REGISTER_WRITE    1
+#define INTE_SCU_IPC_REGISTER_UPDATE   2
+#define INTE_SCU_IPC_FW_UPDATE         0xA2
+
+struct scu_ipc_data {
+       u32     count;  /* No. of registers */
+       u16     addr[5]; /* Register addresses */
+       u8      data[5]; /* Register data */
+       u8      mask; /* Valid for read-modify-write */
+};
+
+/**
+ *     scu_reg_access          -       implement register access ioctls
+ *     @cmd: command we are doing (read/write/update)
+ *     @data: kernel copy of ioctl data
+ *
+ *     Allow the user to perform register accesses on the SCU via the
+ *     kernel interface
+ */
+
+static int scu_reg_access(u32 cmd, struct scu_ipc_data  *data)
+{
+       int count = data->count;
+
+       if (count == 0 || count == 3 || count > 4)
+               return -EINVAL;
+
+       switch (cmd) {
+       case INTE_SCU_IPC_REGISTER_READ:
+               return intel_scu_ipc_readv(data->addr, data->data, count);
+       case INTE_SCU_IPC_REGISTER_WRITE:
+               return intel_scu_ipc_writev(data->addr, data->data, count);
+       case INTE_SCU_IPC_REGISTER_UPDATE:
+               return intel_scu_ipc_update_register(data->addr[0],
+                                                   data->data[0], data->mask);
+       default:
+               return -ENOTTY;
+       }
+}
+
+/**
+ *     scu_ipc_ioctl           -       control ioctls for the SCU
+ *     @fp: file handle of the SCU device
+ *     @cmd: ioctl coce
+ *     @arg: pointer to user passed structure
+ *
+ *     Support the I/O and firmware flashing interfaces of the SCU
+ */
+static long scu_ipc_ioctl(struct file *fp, unsigned int cmd,
+                                                       unsigned long arg)
+{
+       int ret;
+       struct scu_ipc_data  data;
+       void __user *argp = (void __user *)arg;
+
+       if (!capable(CAP_SYS_RAWIO))
+               return -EPERM;
+
+       if (cmd == INTE_SCU_IPC_FW_UPDATE) {
+                       u8 *fwbuf = kmalloc(MAX_FW_SIZE, GFP_KERNEL);
+                       if (fwbuf == NULL)
+                               return -ENOMEM;
+                       if (copy_from_user(fwbuf, (u8 *)arg, MAX_FW_SIZE)) {
+                               kfree(fwbuf);
+                               return -EFAULT;
+                       }
+                       ret = intel_scu_ipc_fw_update(fwbuf, MAX_FW_SIZE);
+                       kfree(fwbuf);
+                       return ret;
+       } else {
+               if (copy_from_user(&data, argp, sizeof(struct scu_ipc_data)))
+                       return -EFAULT;
+               ret = scu_reg_access(cmd, &data);
+               if (ret < 0)
+                       return ret;
+               if (copy_to_user(argp, &data, sizeof(struct scu_ipc_data)))
+                       return -EFAULT;
+               return 0;
+       }
+}
+
+static const struct file_operations scu_ipc_fops = {
+       .unlocked_ioctl = scu_ipc_ioctl,
+};
+
+static int __init ipc_module_init(void)
+{
+       return register_chrdev(0, "intel_mid_scu", &scu_ipc_fops);
+}
+
+static void __exit ipc_module_exit(void)
+{
+       unregister_chrdev(major, "intel_mid_scu");
+}
+
+module_init(ipc_module_init);
+module_exit(ipc_module_exit);
+
+MODULE_LICENSE("GPL V2");
+MODULE_DESCRIPTION("Utility driver for intel scu ipc");
+MODULE_AUTHOR("Sreedhara <sreedhara.ds@intel.com>");