--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO 175
+
+#define OMAP3EVM_ETHR_START 0x2c000000
+#define OMAP3EVM_ETHR_SIZE 1024
+#define OMAP3EVM_ETHR_GPIO_IRQ 176
+#define OMAP3EVM_SMC911X_CS 5
+
+static struct resource omap3evm_smc911x_resources[] = {
+ [0] = {
+ .start = OMAP3EVM_ETHR_START,
+ .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources),
+ .resource = &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+ int eth_cs;
+ struct clk *l3ck;
+ unsigned int rate;
+
+ eth_cs = OMAP3EVM_SMC911X_CS;
+
+ l3ck = clk_get(NULL, "l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+ OMAP3EVM_ETHR_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 63,
+ },
+ {} /* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "omap3evm::ledb",
+ /* normally not visible (board underside) */
+ .default_trigger = "default-on",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ omap_cfg_reg(L8_34XX_GPIO63);
+ mmc[0].gpio_cd = gpio + 0;
+ twl4030_mmc_init(mmc);
+
+ /*
+ * Most GPIOs are for USB OTG. Some are mostly sent to
+ * the P2 connector; notably LEDA for the LCD backlight.
+ */
+
+ /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ platform_device_register(&leds_gpio);
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .setup = omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+ .rows = 4,
+ .cols = 4,
+ .keymap = omap3evm_keymap,
+ .keymapsize = ARRAY_SIZE(omap3evm_keymap),
+ .rep = 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .keypad = &omap3evm_kp_data,
+ .madc = &omap3evm_madc_data,
+ .usb = &omap3evm_usb_data,
+ .gpio = &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &omap3evm_twldata,
+ },
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+ ARRAY_SIZE(omap3evm_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+ .name = "omap3evm_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+ printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+ gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+ omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+ omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .settle_delay_usecs = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+ [0] = {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+ .platform_data = &ads7846_config,
+ },
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+ omap_gpio_init();
+ omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+ { OMAP_TAG_UART, &omap3_evm_uart_config },
+ { OMAP_TAG_LCD, &omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+ &omap3_evm_lcd_device,
+ &omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+ omap3_evm_i2c_init();
+
+ platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+ omap_board_config = omap3_evm_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+ spi_register_board_info(omap3evm_spi_board_info,
+ ARRAY_SIZE(omap3evm_spi_board_info));
+
+ omap_serial_init();
+ usb_musb_init();
+ ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+ /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_evm_map_io,
+ .init_irq = omap3_evm_init_irq,
+ .init_machine = omap3_evm_init,
+ .timer = &omap_timer,
+MACHINE_END
projects / firefly-linux-kernel-4.4.55.git / commitdiff