Bluetooth: Add support for Intel bootloader devices
authorMarcel Holtmann <marcel@holtmann.org>
Sun, 6 Jul 2014 11:29:58 +0000 (13:29 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 29 Apr 2015 08:33:59 +0000 (10:33 +0200)
commit 40df783d1ef1989ac454e3dfcda017270b8950e6 upstream.

Intel Bluetooth devices that boot up in bootloader mode can not
be used as generic HCI devices, but their HCI transport is still
valuable and so bring that up as raw-only devices.

T:  Bus=02 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 14 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=8087 ProdID=0a5a Rev= 0.00
S:  Manufacturer=Intel(R) Corporation
S:  Product=Intel(R) Wilkins Peak 2x2
S:  SerialNumber=001122334455 WP_A0
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
[bwh: Backported to 3.14: adjust context]
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/bluetooth/btusb.c

index 8d1c2f7c8ba5ee55d2462c34e19e04a303050643..5fd1674fd15d77c560d898ab5f698226bdf5704c 100644 (file)
@@ -49,6 +49,7 @@ static struct usb_driver btusb_driver;
 #define BTUSB_WRONG_SCO_MTU    0x40
 #define BTUSB_ATH3012          0x80
 #define BTUSB_INTEL            0x100
+#define BTUSB_INTEL_BOOT       0x200
 
 static struct usb_device_id btusb_table[] = {
        /* Generic Bluetooth USB device */
@@ -116,6 +117,9 @@ static struct usb_device_id btusb_table[] = {
        /* IMC Networks - Broadcom based */
        { USB_VENDOR_AND_INTERFACE_INFO(0x13d3, 0xff, 0x01, 0x01) },
 
+       /* Intel Bluetooth USB Bootloader (RAM module) */
+       { USB_DEVICE(0x8087, 0x0a5a), .driver_info = BTUSB_INTEL_BOOT },
+
        { }     /* Terminating entry */
 };
 
@@ -1449,6 +1453,9 @@ static int btusb_probe(struct usb_interface *intf,
        if (id->driver_info & BTUSB_INTEL)
                hdev->setup = btusb_setup_intel;
 
+       if (id->driver_info & BTUSB_INTEL_BOOT)
+               set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
+
        /* Interface numbers are hardcoded in the specification */
        data->isoc = usb_ifnum_to_if(data->udev, 1);