powerpc/amigaone: Add platform support for AmigaOne
authorGerhard Pircher <gerhard_pircher@gmx.net>
Tue, 10 Feb 2009 12:20:49 +0000 (12:20 +0000)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Wed, 11 Feb 2009 05:00:08 +0000 (16:00 +1100)
This commit adds the setup code for booting Linux on AmigaOne G3SE (G3
only), AmigaOne XE and uA1 (G3/G4) desktop computers. These boards were
sold by Eyetech and are based on MAI Logic's Teron boards and its
Articia S northbridge.
The AmigaOne uses U-boot as firmware, which doesn't support a flattened
device tree yet. The northbridge has some design flaws, which makes it
necessary to use non cacheable memory for DMA operations
(CONFIG_NOT_COHERENT_CACHE) and to avoid setting the coherence (M) flag
for memory pages.

Signed-off-by: Gerhard Pircher <gerhard_pircher@gmx.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
arch/powerpc/platforms/Kconfig
arch/powerpc/platforms/Makefile
arch/powerpc/platforms/amigaone/Kconfig [new file with mode: 0644]
arch/powerpc/platforms/amigaone/Makefile [new file with mode: 0644]
arch/powerpc/platforms/amigaone/setup.c [new file with mode: 0644]

index 200b9cb900ea4b34280d270b51bebe773ca142b4..b25404ca22165d547411a961cef75a71df5491f0 100644 (file)
@@ -28,6 +28,7 @@ source "arch/powerpc/platforms/86xx/Kconfig"
 source "arch/powerpc/platforms/embedded6xx/Kconfig"
 source "arch/powerpc/platforms/44x/Kconfig"
 source "arch/powerpc/platforms/40x/Kconfig"
+source "arch/powerpc/platforms/amigaone/Kconfig"
 
 config PPC_NATIVE
        bool
index 8079e0b4fd69a14a0bde12cd2dfed65732b3bdbd..f7419198e63531aec1138b4852c4525fb198e60e 100644 (file)
@@ -19,3 +19,4 @@ obj-$(CONFIG_PPC_PASEMI)      += pasemi/
 obj-$(CONFIG_PPC_CELL)         += cell/
 obj-$(CONFIG_PPC_PS3)          += ps3/
 obj-$(CONFIG_EMBEDDED6xx)      += embedded6xx/
+obj-$(CONFIG_AMIGAONE)         += amigaone/
diff --git a/arch/powerpc/platforms/amigaone/Kconfig b/arch/powerpc/platforms/amigaone/Kconfig
new file mode 100644 (file)
index 0000000..9276a96
--- /dev/null
@@ -0,0 +1,18 @@
+config AMIGAONE
+       bool "Eyetech AmigaOne/MAI Teron"
+       depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM
+       select PPC_I8259
+       select PPC_INDIRECT_PCI
+       select PPC_UDBG_16550
+       select PCI
+       select NOT_COHERENT_CACHE
+       select CHECK_CACHE_COHERENCY
+       select DEFAULT_UIMAGE
+       select PCSPKR_PLATFORM
+       help
+       Select AmigaOne for the following machines:
+       - AmigaOne SE/Teron CX (G3 only)
+       - AmigaOne XE/Teron PX
+       - uA1/Teron mini
+         More information is available at:
+         <http://amigaone-linux.sourceforge.net/>.
diff --git a/arch/powerpc/platforms/amigaone/Makefile b/arch/powerpc/platforms/amigaone/Makefile
new file mode 100644 (file)
index 0000000..e6885b3
--- /dev/null
@@ -0,0 +1 @@
+obj-y  += setup.o
diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c
new file mode 100644 (file)
index 0000000..4430353
--- /dev/null
@@ -0,0 +1,170 @@
+/*
+ * AmigaOne platform setup
+ *
+ * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net)
+ *
+ *   Based on original amigaone_setup.c source code
+ * Copyright 2003 by Hans-Joerg Frieden and Thomas Frieden
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/seq_file.h>
+#include <linux/utsrelease.h>
+
+#include <asm/machdep.h>
+#include <asm/cputable.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/i8259.h>
+#include <asm/time.h>
+#include <asm/udbg.h>
+
+extern void __flush_disable_L1(void);
+
+void amigaone_show_cpuinfo(struct seq_file *m)
+{
+       seq_printf(m, "vendor\t\t: Eyetech Ltd.\n");
+}
+
+static int __init amigaone_add_bridge(struct device_node *dev)
+{
+       const u32 *cfg_addr, *cfg_data;
+       int len;
+       const int *bus_range;
+       struct pci_controller *hose;
+
+       printk(KERN_INFO "Adding PCI host bridge %s\n", dev->full_name);
+
+       cfg_addr = of_get_address(dev, 0, NULL, NULL);
+       cfg_data = of_get_address(dev, 1, NULL, NULL);
+       if ((cfg_addr == NULL) || (cfg_data == NULL))
+               return -ENODEV;
+
+       bus_range = of_get_property(dev, "bus-range", &len);
+       if ((bus_range == NULL) || (len < 2 * sizeof(int)))
+               printk(KERN_WARNING "Can't get bus-range for %s, assume"
+                      " bus 0\n", dev->full_name);
+
+       hose = pcibios_alloc_controller(dev);
+       if (hose == NULL)
+               return -ENOMEM;
+
+       hose->first_busno = bus_range ? bus_range[0] : 0;
+       hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+       setup_indirect_pci(hose, cfg_addr[0], cfg_data[0], 0);
+
+       /* Interpret the "ranges" property */
+       /* This also maps the I/O region and sets isa_io/mem_base */
+       pci_process_bridge_OF_ranges(hose, dev, 1);
+
+       return 0;
+}
+
+void __init amigaone_setup_arch(void)
+{
+       struct device_node *np;
+       int phb = -ENODEV;
+
+       /* Lookup PCI host bridges. */
+       for_each_compatible_node(np, "pci", "mai-logic,articia-s")
+               phb = amigaone_add_bridge(np);
+
+       BUG_ON(phb != 0);
+
+       if (ppc_md.progress)
+               ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0);
+}
+
+void __init amigaone_init_IRQ(void)
+{
+       struct device_node *pic, *np = NULL;
+       const unsigned long *prop = NULL;
+       unsigned long int_ack = 0;
+
+       /* Search for ISA interrupt controller. */
+       pic = of_find_compatible_node(NULL, "interrupt-controller",
+                                     "pnpPNP,000");
+       BUG_ON(pic == NULL);
+
+       /* Look for interrupt acknowledge address in the PCI root node. */
+       np = of_find_compatible_node(NULL, "pci", "mai-logic,articia-s");
+       if (np) {
+               prop = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+               if (prop)
+                       int_ack = prop[0];
+               of_node_put(np);
+       }
+
+       if (int_ack == 0)
+               printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
+                      " address, polling\n");
+
+       i8259_init(pic, int_ack);
+       ppc_md.get_irq = i8259_irq;
+       irq_set_default_host(i8259_get_host());
+}
+
+void __init amigaone_init(void)
+{
+       request_region(0x00, 0x20, "dma1");
+       request_region(0x40, 0x20, "timer");
+       request_region(0x80, 0x10, "dma page reg");
+       request_region(0xc0, 0x20, "dma2");
+}
+
+void amigaone_restart(char *cmd)
+{
+       local_irq_disable();
+
+       /* Flush and disable caches. */
+       __flush_disable_L1();
+
+        /* Set SRR0 to the reset vector and turn on MSR_IP. */
+       mtspr(SPRN_SRR0, 0xfff00100);
+       mtspr(SPRN_SRR1, MSR_IP);
+
+       /* Do an rfi to jump back to firmware. */
+       __asm__ __volatile__("rfi" : : : "memory");
+
+       /* Not reached. */
+       while (1);
+}
+
+static int __init amigaone_probe(void)
+{
+       unsigned long root = of_get_flat_dt_root();
+
+       if (of_flat_dt_is_compatible(root, "eyetech,amigaone")) {
+               /*
+                * Coherent memory access cause complete system lockup! Thus
+                * disable this CPU feature, even if the CPU needs it.
+                */
+               cur_cpu_spec->cpu_features &= ~CPU_FTR_NEED_COHERENT;
+
+               ISA_DMA_THRESHOLD = 0x00ffffff;
+               DMA_MODE_READ = 0x44;
+               DMA_MODE_WRITE = 0x48;
+
+               return 1;
+       }
+
+       return 0;
+}
+
+define_machine(amigaone) {
+       .name                   = "AmigaOne",
+       .probe                  = amigaone_probe,
+       .setup_arch             = amigaone_setup_arch,
+       .init                   = amigaone_init,
+       .show_cpuinfo           = amigaone_show_cpuinfo,
+       .init_IRQ               = amigaone_init_IRQ,
+       .restart                = amigaone_restart,
+       .calibrate_decr         = generic_calibrate_decr,
+       .progress               = udbg_progress,
+};