MIPS: BCM63xx: Add PCMCIA & Cardbus support.
authorMaxime Bizon <mbizon@freebox.fr>
Mon, 28 Sep 2009 12:49:43 +0000 (14:49 +0200)
committerRalf Baechle <ralf@linux-mips.org>
Wed, 30 Sep 2009 19:47:01 +0000 (21:47 +0200)
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
arch/mips/bcm63xx/Makefile
arch/mips/bcm63xx/boards/board_bcm963xx.c
arch/mips/bcm63xx/dev-pcmcia.c [new file with mode: 0644]
arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h [new file with mode: 0644]
drivers/pcmcia/Kconfig
drivers/pcmcia/Makefile
drivers/pcmcia/bcm63xx_pcmcia.c [new file with mode: 0644]
drivers/pcmcia/bcm63xx_pcmcia.h [new file with mode: 0644]

index cff75de8449b16c90ab20061f2c6d9d128be901c..c146d1ededede3e4a0eeeb37e268dc3472b753f5 100644 (file)
@@ -1,5 +1,5 @@
 obj-y          += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-                  dev-dsp.o dev-enet.o dev-uart.o
+                  dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o
 obj-$(CONFIG_EARLY_PRINTK)     += early_printk.o
 
 obj-y          += boards/
index 5a327f3a7167e521ed5bb3e3982e927e4290b40e..78e155d21be61cdc8c59c4cf84395d6f54183805 100644 (file)
@@ -23,6 +23,7 @@
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_pcmcia.h>
 #include <bcm63xx_dev_uart.h>
 #include <board_bcm963xx.h>
 
@@ -795,6 +796,9 @@ int __init board_register_devices(void)
 
        bcm63xx_uart_register();
 
+       if (board.has_pccard)
+               bcm63xx_pcmcia_register();
+
        if (board.has_enet0 &&
            !board_get_mac_address(board.enet0.mac_addr))
                bcm63xx_enet_register(0, &board.enet0);
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
new file mode 100644 (file)
index 0000000..de4d917
--- /dev/null
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/bootinfo.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static struct resource pcmcia_resources[] = {
+       /* pcmcia registers */
+       {
+               /* start & end filled at runtime */
+               .flags          = IORESOURCE_MEM,
+       },
+
+       /* pcmcia memory zone resources */
+       {
+               .start          = BCM_PCMCIA_COMMON_BASE_PA,
+               .end            = BCM_PCMCIA_COMMON_END_PA,
+               .flags          = IORESOURCE_MEM,
+       },
+       {
+               .start          = BCM_PCMCIA_ATTR_BASE_PA,
+               .end            = BCM_PCMCIA_ATTR_END_PA,
+               .flags          = IORESOURCE_MEM,
+       },
+       {
+               .start          = BCM_PCMCIA_IO_BASE_PA,
+               .end            = BCM_PCMCIA_IO_END_PA,
+               .flags          = IORESOURCE_MEM,
+       },
+
+       /* PCMCIA irq */
+       {
+               /* start filled at runtime */
+               .flags          = IORESOURCE_IRQ,
+       },
+
+       /* declare PCMCIA IO resource also */
+       {
+               .start          = BCM_PCMCIA_IO_BASE_PA,
+               .end            = BCM_PCMCIA_IO_END_PA,
+               .flags          = IORESOURCE_IO,
+       },
+};
+
+static struct bcm63xx_pcmcia_platform_data pd;
+
+static struct platform_device bcm63xx_pcmcia_device = {
+       .name           = "bcm63xx_pcmcia",
+       .id             = 0,
+       .num_resources  = ARRAY_SIZE(pcmcia_resources),
+       .resource       = pcmcia_resources,
+       .dev            = {
+               .platform_data = &pd,
+       },
+};
+
+static int __init config_pcmcia_cs(unsigned int cs,
+                                  u32 base, unsigned int size)
+{
+       int ret;
+
+       ret = bcm63xx_set_cs_status(cs, 0);
+       if (!ret)
+               ret = bcm63xx_set_cs_base(cs, base, size);
+       if (!ret)
+               ret = bcm63xx_set_cs_status(cs, 1);
+       return ret;
+}
+
+static const __initdata struct {
+       unsigned int    cs;
+       unsigned int    base;
+       unsigned int    size;
+} pcmcia_cs[3] = {
+       {
+               .cs     = MPI_CS_PCMCIA_COMMON,
+               .base   = BCM_PCMCIA_COMMON_BASE_PA,
+               .size   = BCM_PCMCIA_COMMON_SIZE
+       },
+       {
+               .cs     = MPI_CS_PCMCIA_ATTR,
+               .base   = BCM_PCMCIA_ATTR_BASE_PA,
+               .size   = BCM_PCMCIA_ATTR_SIZE
+       },
+       {
+               .cs     = MPI_CS_PCMCIA_IO,
+               .base   = BCM_PCMCIA_IO_BASE_PA,
+               .size   = BCM_PCMCIA_IO_SIZE
+       },
+};
+
+int __init bcm63xx_pcmcia_register(void)
+{
+       int ret, i;
+
+       if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+               return 0;
+
+       /* use correct pcmcia ready gpio depending on processor */
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6348_CPU_ID:
+               pd.ready_gpio = 22;
+               break;
+
+       case BCM6358_CPU_ID:
+               pd.ready_gpio = 18;
+               break;
+
+       default:
+               return -ENODEV;
+       }
+
+       pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
+       pcmcia_resources[0].end = pcmcia_resources[0].start +
+               RSET_PCMCIA_SIZE - 1;
+       pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
+
+       /* configure pcmcia chip selects */
+       for (i = 0; i < 3; i++) {
+               ret = config_pcmcia_cs(pcmcia_cs[i].cs,
+                                      pcmcia_cs[i].base,
+                                      pcmcia_cs[i].size);
+               if (ret)
+                       goto out_err;
+       }
+
+       return platform_device_register(&bcm63xx_pcmcia_device);
+
+out_err:
+       printk(KERN_ERR "unable to set pcmcia chip select\n");
+       return ret;
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
new file mode 100644 (file)
index 0000000..2beb396
--- /dev/null
@@ -0,0 +1,13 @@
+#ifndef BCM63XX_DEV_PCMCIA_H_
+#define BCM63XX_DEV_PCMCIA_H_
+
+/*
+ * PCMCIA driver platform data
+ */
+struct bcm63xx_pcmcia_platform_data {
+       unsigned int ready_gpio;
+};
+
+int bcm63xx_pcmcia_register(void);
+
+#endif /* BCM63XX_DEV_PCMCIA_H_ */
index fbf965b31c14b3cacf165a4b9f82c6e5a667508d..17f38a781d47b5d3a2510da5a2e680e7bf8f2346 100644 (file)
@@ -192,6 +192,10 @@ config PCMCIA_AU1X00
        tristate "Au1x00 pcmcia support"
        depends on SOC_AU1X00 && PCMCIA
 
+config PCMCIA_BCM63XX
+       tristate "bcm63xx pcmcia support"
+       depends on BCM63XX && PCMCIA
+
 config PCMCIA_SA1100
        tristate "SA1100 support"
        depends on ARM && ARCH_SA1100 && PCMCIA
index 3247828aa203b8f73c07cc1af1851805f696dc2d..a03a38acd77d5a1ed1b34f63a24b03611c67d47f 100644 (file)
@@ -27,6 +27,7 @@ obj-$(CONFIG_PCMCIA_SA1111)                   += sa11xx_core.o sa1111_cs.o
 obj-$(CONFIG_M32R_PCC)                         += m32r_pcc.o
 obj-$(CONFIG_M32R_CFC)                         += m32r_cfc.o
 obj-$(CONFIG_PCMCIA_AU1X00)                    += au1x00_ss.o
+obj-$(CONFIG_PCMCIA_BCM63XX)                   += bcm63xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_VRC4171)                   += vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)                   += vrc4173_cardu.o
 obj-$(CONFIG_OMAP_CF)                          += omap_cf.o
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c
new file mode 100644 (file)
index 0000000..bc88a3b
--- /dev/null
@@ -0,0 +1,536 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include "bcm63xx_pcmcia.h"
+
+#define PFX    "bcm63xx_pcmcia: "
+
+#ifdef CONFIG_CARDBUS
+/* if cardbus is used, platform device needs reference to actual pci
+ * device */
+static struct pci_dev *bcm63xx_cb_dev;
+#endif
+
+/*
+ * read/write helper for pcmcia regs
+ */
+static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
+{
+       return bcm_readl(skt->base + off);
+}
+
+static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
+                                u32 val, u32 off)
+{
+       bcm_writel(val, skt->base + off);
+}
+
+/*
+ * This callback should (re-)initialise the socket, turn on status
+ * interrupts and PCMCIA bus, and wait for power to stabilise so that
+ * the card status signals report correctly.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
+{
+       return 0;
+}
+
+/*
+ * This callback should remove power on the socket, disable IRQs from
+ * the card, turn off status interrupts, and disable the PCMCIA bus.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
+{
+       return 0;
+}
+
+/*
+ * Implements the set_socket() operation for the in-kernel PCMCIA
+ * service (formerly SS_SetSocket in Card Services). We more or
+ * less punt all of this work and let the kernel handle the details
+ * of power configuration, reset, &c. We also record the value of
+ * `state' in order to regurgitate it to the PCMCIA core later.
+ */
+static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
+                                    socket_state_t *state)
+{
+       struct bcm63xx_pcmcia_socket *skt;
+       unsigned long flags;
+       u32 val;
+
+       skt = sock->driver_data;
+
+       spin_lock_irqsave(&skt->lock, flags);
+
+       /* note: hardware cannot control socket power, so we will
+        * always report SS_POWERON */
+
+       /* apply socket reset */
+       val = pcmcia_readl(skt, PCMCIA_C1_REG);
+       if (state->flags & SS_RESET)
+               val |= PCMCIA_C1_RESET_MASK;
+       else
+               val &= ~PCMCIA_C1_RESET_MASK;
+
+       /* reverse reset logic for cardbus card */
+       if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
+               val ^= PCMCIA_C1_RESET_MASK;
+
+       pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+       /* keep requested state for event reporting */
+       skt->requested_state = *state;
+
+       spin_unlock_irqrestore(&skt->lock, flags);
+
+       return 0;
+}
+
+/*
+ * identity cardtype from VS[12] input, CD[12] input while only VS2 is
+ * floating, and CD[12] input while only VS1 is floating
+ */
+enum {
+       IN_VS1 = (1 << 0),
+       IN_VS2 = (1 << 1),
+       IN_CD1_VS2H = (1 << 2),
+       IN_CD2_VS2H = (1 << 3),
+       IN_CD1_VS1H = (1 << 4),
+       IN_CD2_VS1H = (1 << 5),
+};
+
+static const u8 vscd_to_cardtype[] = {
+
+       /* VS1 float, VS2 float */
+       [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
+
+       /* VS1 grounded, VS2 float */
+       [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
+
+       /* VS1 grounded, VS2 grounded */
+       [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
+
+       /* VS1 tied to CD1, VS2 float */
+       [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
+
+       /* VS1 grounded, VS2 tied to CD2 */
+       [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
+
+       /* VS1 tied to CD2, VS2 grounded */
+       [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
+
+       /* VS1 float, VS2 grounded */
+       [IN_VS1] = (CARD_PCCARD | CARD_XV),
+
+       /* VS1 float, VS2 tied to CD2 */
+       [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
+
+       /* VS1 float, VS2 tied to CD1 */
+       [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
+
+       /* VS1 tied to CD2, VS2 float */
+       [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
+
+       /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
+       [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
+};
+
+/*
+ * poll hardware to check card insertion status
+ */
+static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
+{
+       unsigned int stat;
+       u32 val;
+
+       stat = 0;
+
+       /* check CD for card presence */
+       val = pcmcia_readl(skt, PCMCIA_C1_REG);
+
+       if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
+               stat |= SS_DETECT;
+
+       /* if new insertion, detect cardtype */
+       if ((stat & SS_DETECT) && !skt->card_detected) {
+               unsigned int stat = 0;
+
+               /* float VS1, float VS2 */
+               val |= PCMCIA_C1_VS1OE_MASK;
+               val |= PCMCIA_C1_VS2OE_MASK;
+               pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+               /* wait for output to stabilize and read VS[12] */
+               udelay(10);
+               val = pcmcia_readl(skt, PCMCIA_C1_REG);
+               stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
+               stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
+
+               /* drive VS1 low, float VS2 */
+               val &= ~PCMCIA_C1_VS1OE_MASK;
+               val |= PCMCIA_C1_VS2OE_MASK;
+               pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+               /* wait for output to stabilize and read CD[12] */
+               udelay(10);
+               val = pcmcia_readl(skt, PCMCIA_C1_REG);
+               stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
+               stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
+
+               /* float VS1, drive VS2 low */
+               val |= PCMCIA_C1_VS1OE_MASK;
+               val &= ~PCMCIA_C1_VS2OE_MASK;
+               pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+               /* wait for output to stabilize and read CD[12] */
+               udelay(10);
+               val = pcmcia_readl(skt, PCMCIA_C1_REG);
+               stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
+               stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
+
+               /* guess cardtype from all this */
+               skt->card_type = vscd_to_cardtype[stat];
+               if (!skt->card_type)
+                       dev_err(&skt->socket.dev, "unsupported card type\n");
+
+               /* drive both VS pin to 0 again */
+               val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
+
+               /* enable correct logic */
+               val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
+               if (skt->card_type & CARD_PCCARD)
+                       val |= PCMCIA_C1_EN_PCMCIA_MASK;
+               else
+                       val |= PCMCIA_C1_EN_CARDBUS_MASK;
+
+               pcmcia_writel(skt, val, PCMCIA_C1_REG);
+       }
+       skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
+
+       /* report card type/voltage */
+       if (skt->card_type & CARD_CARDBUS)
+               stat |= SS_CARDBUS;
+       if (skt->card_type & CARD_3V)
+               stat |= SS_3VCARD;
+       if (skt->card_type & CARD_XV)
+               stat |= SS_XVCARD;
+       stat |= SS_POWERON;
+
+       if (gpio_get_value(skt->pd->ready_gpio))
+               stat |= SS_READY;
+
+       return stat;
+}
+
+/*
+ * core request to get current socket status
+ */
+static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
+                                    unsigned int *status)
+{
+       struct bcm63xx_pcmcia_socket *skt;
+
+       skt = sock->driver_data;
+
+       spin_lock_bh(&skt->lock);
+       *status = __get_socket_status(skt);
+       spin_unlock_bh(&skt->lock);
+
+       return 0;
+}
+
+/*
+ * socket polling timer callback
+ */
+static void bcm63xx_pcmcia_poll(unsigned long data)
+{
+       struct bcm63xx_pcmcia_socket *skt;
+       unsigned int stat, events;
+
+       skt = (struct bcm63xx_pcmcia_socket *)data;
+
+       spin_lock_bh(&skt->lock);
+
+       stat = __get_socket_status(skt);
+
+       /* keep only changed bits, and mask with required one from the
+        * core */
+       events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
+       skt->old_status = stat;
+       spin_unlock_bh(&skt->lock);
+
+       if (events)
+               pcmcia_parse_events(&skt->socket, events);
+
+       mod_timer(&skt->timer,
+                 jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+}
+
+static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
+                                    struct pccard_io_map *map)
+{
+       /* this doesn't seem to be called by pcmcia layer if static
+        * mapping is used */
+       return 0;
+}
+
+static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
+                                     struct pccard_mem_map *map)
+{
+       struct bcm63xx_pcmcia_socket *skt;
+       struct resource *res;
+
+       skt = sock->driver_data;
+       if (map->flags & MAP_ATTRIB)
+               res = skt->attr_res;
+       else
+               res = skt->common_res;
+
+       map->static_start = res->start + map->card_start;
+       return 0;
+}
+
+static struct pccard_operations bcm63xx_pcmcia_operations = {
+       .init                   = bcm63xx_pcmcia_sock_init,
+       .suspend                = bcm63xx_pcmcia_suspend,
+       .get_status             = bcm63xx_pcmcia_get_status,
+       .set_socket             = bcm63xx_pcmcia_set_socket,
+       .set_io_map             = bcm63xx_pcmcia_set_io_map,
+       .set_mem_map            = bcm63xx_pcmcia_set_mem_map,
+};
+
+/*
+ * register pcmcia socket to core
+ */
+static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
+{
+       struct bcm63xx_pcmcia_socket *skt;
+       struct pcmcia_socket *sock;
+       struct resource *res, *irq_res;
+       unsigned int regmem_size = 0, iomem_size = 0;
+       u32 val;
+       int ret;
+
+       skt = kzalloc(sizeof(*skt), GFP_KERNEL);
+       if (!skt)
+               return -ENOMEM;
+       spin_lock_init(&skt->lock);
+       sock = &skt->socket;
+       sock->driver_data = skt;
+
+       /* make sure we have all resources we need */
+       skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+       skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+       irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+       skt->pd = pdev->dev.platform_data;
+       if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
+               ret = -EINVAL;
+               goto err;
+       }
+
+       /* remap pcmcia registers */
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       regmem_size = resource_size(res);
+       if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
+               ret = -EINVAL;
+               goto err;
+       }
+       skt->reg_res = res;
+
+       skt->base = ioremap(res->start, regmem_size);
+       if (!skt->base) {
+               ret = -ENOMEM;
+               goto err;
+       }
+
+       /* remap io registers */
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+       iomem_size = resource_size(res);
+       skt->io_base = ioremap(res->start, iomem_size);
+       if (!skt->io_base) {
+               ret = -ENOMEM;
+               goto err;
+       }
+
+       /* resources are static */
+       sock->resource_ops = &pccard_static_ops;
+       sock->ops = &bcm63xx_pcmcia_operations;
+       sock->owner = THIS_MODULE;
+       sock->dev.parent = &pdev->dev;
+       sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+       sock->io_offset = (unsigned long)skt->io_base;
+       sock->pci_irq = irq_res->start;
+
+#ifdef CONFIG_CARDBUS
+       sock->cb_dev = bcm63xx_cb_dev;
+       if (bcm63xx_cb_dev)
+               sock->features |= SS_CAP_CARDBUS;
+#endif
+
+       /* assume common & attribute memory have the same size */
+       sock->map_size = resource_size(skt->common_res);
+
+       /* initialize polling timer */
+       setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
+
+       /* initialize  pcmcia  control register,  drive  VS[12] to  0,
+        * leave CB IDSEL to the old  value since it is set by the PCI
+        * layer */
+       val = pcmcia_readl(skt, PCMCIA_C1_REG);
+       val &= PCMCIA_C1_CBIDSEL_MASK;
+       val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
+       pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+       /*
+        * Hardware has only one set of timings registers, not one for
+        * each memory access type, so we configure them for the
+        * slowest one: attribute memory.
+        */
+       val = PCMCIA_C2_DATA16_MASK;
+       val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
+       val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
+       val |= 3 << PCMCIA_C2_SETUP_SHIFT;
+       val |= 3 << PCMCIA_C2_HOLD_SHIFT;
+       pcmcia_writel(skt, val, PCMCIA_C2_REG);
+
+       ret = pcmcia_register_socket(sock);
+       if (ret)
+               goto err;
+
+       /* start polling socket */
+       mod_timer(&skt->timer,
+                 jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+
+       platform_set_drvdata(pdev, skt);
+       return 0;
+
+err:
+       if (skt->io_base)
+               iounmap(skt->io_base);
+       if (skt->base)
+               iounmap(skt->base);
+       if (skt->reg_res)
+               release_mem_region(skt->reg_res->start, regmem_size);
+       kfree(skt);
+       return ret;
+}
+
+static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
+{
+       struct bcm63xx_pcmcia_socket *skt;
+       struct resource *res;
+
+       skt = platform_get_drvdata(pdev);
+       del_timer_sync(&skt->timer);
+       iounmap(skt->base);
+       iounmap(skt->io_base);
+       res = skt->reg_res;
+       release_mem_region(res->start, resource_size(res));
+       kfree(skt);
+       return 0;
+}
+
+struct platform_driver bcm63xx_pcmcia_driver = {
+       .probe  = bcm63xx_drv_pcmcia_probe,
+       .remove = __devexit_p(bcm63xx_drv_pcmcia_remove),
+       .driver = {
+               .name   = "bcm63xx_pcmcia",
+               .owner  = THIS_MODULE,
+       },
+};
+
+#ifdef CONFIG_CARDBUS
+static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
+                                     const struct pci_device_id *id)
+{
+       /* keep pci device */
+       bcm63xx_cb_dev = dev;
+       return platform_driver_register(&bcm63xx_pcmcia_driver);
+}
+
+static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
+{
+       platform_driver_unregister(&bcm63xx_pcmcia_driver);
+       bcm63xx_cb_dev = NULL;
+}
+
+static struct pci_device_id bcm63xx_cb_table[] = {
+       {
+               .vendor         = PCI_VENDOR_ID_BROADCOM,
+               .device         = BCM6348_CPU_ID,
+               .subvendor      = PCI_VENDOR_ID_BROADCOM,
+               .subdevice      = PCI_ANY_ID,
+               .class          = PCI_CLASS_BRIDGE_CARDBUS << 8,
+               .class_mask     = ~0,
+       },
+
+       {
+               .vendor         = PCI_VENDOR_ID_BROADCOM,
+               .device         = BCM6358_CPU_ID,
+               .subvendor      = PCI_VENDOR_ID_BROADCOM,
+               .subdevice      = PCI_ANY_ID,
+               .class          = PCI_CLASS_BRIDGE_CARDBUS << 8,
+               .class_mask     = ~0,
+       },
+
+       { },
+};
+
+MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
+
+static struct pci_driver bcm63xx_cardbus_driver = {
+       .name           = "bcm63xx_cardbus",
+       .id_table       = bcm63xx_cb_table,
+       .probe          = bcm63xx_cb_probe,
+       .remove         = __devexit_p(bcm63xx_cb_exit),
+};
+#endif
+
+/*
+ * if cardbus support is enabled, register our platform device after
+ * our fake cardbus bridge has been registered
+ */
+static int __init bcm63xx_pcmcia_init(void)
+{
+#ifdef CONFIG_CARDBUS
+       return pci_register_driver(&bcm63xx_cardbus_driver);
+#else
+       return platform_driver_register(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+static void __exit bcm63xx_pcmcia_exit(void)
+{
+#ifdef CONFIG_CARDBUS
+       return pci_unregister_driver(&bcm63xx_cardbus_driver);
+#else
+       platform_driver_unregister(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+module_init(bcm63xx_pcmcia_init);
+module_exit(bcm63xx_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.h b/drivers/pcmcia/bcm63xx_pcmcia.h
new file mode 100644 (file)
index 0000000..ed95739
--- /dev/null
@@ -0,0 +1,60 @@
+#ifndef BCM63XX_PCMCIA_H_
+#define BCM63XX_PCMCIA_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <pcmcia/ss.h>
+#include <bcm63xx_dev_pcmcia.h>
+
+/* socket polling rate in ms */
+#define BCM63XX_PCMCIA_POLL_RATE       500
+
+enum {
+       CARD_CARDBUS = (1 << 0),
+       CARD_PCCARD = (1 << 1),
+       CARD_5V = (1 << 2),
+       CARD_3V = (1 << 3),
+       CARD_XV = (1 << 4),
+       CARD_YV = (1 << 5),
+};
+
+struct bcm63xx_pcmcia_socket {
+       struct pcmcia_socket socket;
+
+       /* platform specific data */
+       struct bcm63xx_pcmcia_platform_data *pd;
+
+       /* all regs access are protected by this spinlock */
+       spinlock_t lock;
+
+       /* pcmcia registers resource */
+       struct resource *reg_res;
+
+       /* base remapped address of registers */
+       void __iomem *base;
+
+       /* whether a card is detected at the moment */
+       int card_detected;
+
+       /* type of detected card (mask of above enum) */
+       u8 card_type;
+
+       /* keep last socket status to implement event reporting */
+       unsigned int old_status;
+
+       /* backup of requested socket state */
+       socket_state_t requested_state;
+
+       /* timer used for socket status polling */
+       struct timer_list timer;
+
+       /* attribute/common memory resources */
+       struct resource *attr_res;
+       struct resource *common_res;
+       struct resource *io_res;
+
+       /* base address of io memory */
+       void __iomem *io_base;
+};
+
+#endif /* BCM63XX_PCMCIA_H_ */